From buildroot at athaariq.my.id Sat Oct 1 02:05:19 2022 From: buildroot at athaariq.my.id (Athaariq Ardhiansyah) Date: Sat, 01 Oct 2022 02:05:19 +0000 (UTC) Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug Message-ID: <20221001020445.1458953-1-buildroot@athaariq.my.id> Temporary fix for buildroot-specific bug. Ideally, we should install linux-headers first then glibc. Is this actually possible on Buildroot? If yes, then we can also fix bug #15021 simultaneously if linux-headers being installed first as possible. Signed-off-by: Athaariq Ardhiansyah --- .../0002-fsconfig_command-workaround.patch | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 package/glibc/0002-fsconfig_command-workaround.patch diff --git a/package/glibc/0002-fsconfig_command-workaround.patch b/package/glibc/0002-fsconfig_command-workaround.patch new file mode 100644 index 0000000000..27dd25b244 --- /dev/null +++ b/package/glibc/0002-fsconfig_command-workaround.patch @@ -0,0 +1,17 @@ +diff --git a/sysdeps/unix/sysv/linux/sys/mount.h b/sysdeps/unix/sysv/linux/sys/mount.h +index 19841d0738..43a681d097 100644 +--- a/sysdeps/unix/sysv/linux/sys/mount.h ++++ b/sysdeps/unix/sysv/linux/sys/mount.h +@@ -27,11 +27,7 @@ + #include + #include + +-#ifdef __has_include +-# if __has_include ("linux/mount.h") +-# include "linux/mount.h" +-# endif +-#endif ++#include "linux/mount.h" + + + #define BLOCK_SIZE_BITS 10 -- 2.37.3 From thomas.petazzoni at bootlin.com Sat Oct 1 05:35:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 01 Oct 2022 05:35:56 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-09-30 Message-ID: <20221001053603.88789419BD@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-09-30 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 1 | 1 | 6 | 2022.05.x | 18 | 7 | 0 | 25 | master | 134 | 290 | 0 | 424 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 20 host-sentry-cli-1.59.0 | 17 igd2-for-linux-2.1 | 13 unknown | 13 autofs-5.1.8 | 10 glibc-2.36-44-g2628500f5dff... | 10 libarchive-3.6.1 | 10 sysvinit-2.99 | 10 host-go-1.19.1 | 8 systemd-250.4 | 8 btrfs-progs-5.16.2 | 6 host-binutils-2.38 | 6 gerbera-1.10.0 | 5 gobject-introspection-1.72.0 | 5 hdparm-9.63 | 5 host-rust-1.64.0 | 5 linux-5.17.15 | 5 dash-0.5.11.5 | 4 host-gcc-final-11.3.0 | 4 libglib2-2.72.3 | 4 casync-4ad9bcb94bc83ff36cfc... | 3 elfutils-0.186 | 3 gensio-2.5.2 | 3 host-binutils-2.39 | 3 host-pahole-73383b3a39afe86... | 3 libcap-ng-0.8.3 | 3 libgpg-error-1.45 | 3 ltp-testsuite-20220527 | 3 lxc-4.0.12 | 3 wolfssl-5.5.0 | 3 dahdi-linux-5c840cf43838e06... | 2 freeradius-server-3.2.0 | 2 gummiboot-2bcd919c681c952eb... | 2 host-binutils-2.37 | 2 host-gcc-final-10.4.0 | 2 host-gdb-arc-2020.09-releas... | 2 igh-ethercat-1.5.2 | 2 linux-tools | 2 mtd-2.1.3 | 2 ntp-4.2.8p15 | 2 quickjs-2021-03-27 | 2 sudo-1.9.11p2 | 2 xenomai-3.0.10 | 2 zlib-ng-2.0.6 | 2 acpid-2.0.33 | 1 afboot-stm32-3566acd582e553... | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 bitcoin-0.21.2 | 1 bpftool-v6.8.0 | 1 brltty-6.4 | 1 cairo-1.16.0 | 1 coreutils-9.1 | 1 cryptodev-linux-1.12 | 1 dmalloc-5.6.5 | 1 dropbear-2022.82 | 1 efivar-37 | 1 erlang-22.3.4.22 | 1 exempi-2.6.1 | 1 fdk-aac-2.0.2 | 1 ffmpeg-4.4.2 | 1 fftw-quad-3.3.8 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /nvmed... | 1 fs/cpio/cpio.mk:117: /nvmed... | 1 fs/cramfs/cramfs.mk:46: /nv... | 1 fs/ubi/ubi.mk:51: /nvmedata... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 gmp-6.2.1 | 1 host-delve-1.8.0 | 1 host-python3-3.10.7 | 1 host-spirv-llvm-translator-... | 1 jack2-1.9.20 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libclc-13.0.1 | 1 libcuefile-475 | 1 libdeflate-1.12 | 1 libgcrypt-1.10.1 | 1 liblog4c-localtime-1.0 | 1 libmdbx-0.11.11 | 1 libostree-2022.5 | 1 libsodium-1.0.18 | 1 libzlib-1.2.12 | 1 linux-5.10.109-cip5-rt4 | 1 luajit-5677985dc1f19cf0a671... | 1 mariadb-10.3.36 | 1 mpfr-4.1.0 | 1 musl-1.2.3 | 1 ntpsec-1_2_1 | 1 ocf-linux-20120127 | 1 open62541-v1.3.3 | 1 openssh-9.0p1 | 1 perl-5.34.1 | 1 procps-ng-3.3.17 | 1 qemu-7.1.0 | 1 rtl8723ds-76146e85847beb242... | 1 sdl-1.2.15 | 1 skalibs-2.10.0.3 | 1 stress-ng-0.13.05 | 1 tealdeer-1.5.0 | 1 uboot-tools-2021.07 | 1 uclibc-1.0.42 | 1 valgrind-3.19.0 | 1 zeek-4.1.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/c19fd0cd8e5db1fb1828570d0883fb900b780c56 | ORPH arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/4394bc30aefb5c88a906cf38b9e90176e54cdf4a | powerpc64le | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/346549264d4b5404b6726323b0194abe6c798ab9 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/c09f18e0bb2bf4a8dcb4d50dd1ed1392ab6c8d04 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/210ae9d27002e332f44b5d63af76013b4914dc86 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3527aa9ea8e151bacad792302b1c4fa46d1a2321 | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6321a82fbd8b2917539e37631447bd6e75e39269 | i586 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7381d4ee7df1523f88cfc1a0c263793ede3ecd91 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2378bc8e7994f41c9fc80f26d0d2e129f7919747 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/98278127535846e2ba80e0c9ab5211fad4023211 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b7389ca1db7679f65f2b7423a2d2af73ac4cf9ae | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce04b19669ee20c8fef569231a3c3b0fd8d3c1cc | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1757e20f24ae24ed881230843e81130c30613752 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1412189a94fe59b7193f745fcea4ba320cbcfe4a | aarch64 | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/63e794bb6dda48163190ce2e006e304a20b180c5 | aarch64_be | bpftool-v6.8.0 | NOK | http://autobuild.buildroot.net/results/aa2aad575178300792802d14c29b921286041a66 | microblazeel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/f000a7c043e76bef384e5dfefa98d9e4412fc99f | mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4ac57ac49892dbbce06d1b5139515e85492f87e2 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8a570b3685adfce6597c077620ef2bf2033f96e7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6b94618755158d129c3388bf6e75da135198b1c2 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/93609544f3673a83ef29edb2bf9a1dcbf95f2af3 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b114f071bd7f707da8efb189fd7fe3a54a78a324 | ORPH i586 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/92da93603cfb86c30c23712afcaf9de4c1e5ff61 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/3c1c0df272004e3b46ffa271965608dc20041382 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/c6ebc1d8f96df8cd19304119ef8c4f4cf4e62c89 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/95190eebf025b9e1d0723eed203bdbb80bc87315 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/feb52d2b30a6f6ac67660dc9b1333adb8504ac48 | sh4a | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/38d9c95b3f6cf8ffada10f22c530d493a693247e | ORPH mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/911a16764a97b20553985491ced63bd8ea5ab996 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6cec43df7af91c12988165351a99c500984cbbd8 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a1af82ab539d436ba4b4618e0cff2d3e841859a4 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c6bc66dd7de13b03207a85fd6933474f5dabc1b2 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7eda6a71816750719e60e05b584b73475ca21e9f | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/27b7da26bdbb109f6b5268356615a5d5322f7caf | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29ad54e314f3bc3bb73bcc8c7b707c426ad987cf | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/044d4326ca0b279968fed29b7462a71e7b472f6a | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aef2a3965a26058f2e5d0b44223f2f350921456c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1195e02791a659858b6b47bbcb6c02e2f79f0d8a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c86ca467ea703af49a7994fee0c8342ab3263291 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eb60a753cb5d6b19d4fd3119c069a1311a7fcd7f | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a7c5c6034ed25bea34ec33b09744e3adaa5fc426 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/878a794d8d49656e19784ca698fdf900c727bbb6 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f452fe08a1e7db2cf1a01aaa31185f404d4b3da1 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/66682a3ef00813661de9bfba16b17b1198093eef | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/252cbc44a5b7f813ef89fd1c39528dc8fe8308b5 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dc5cf477849817da892093c325c9335973216e2c | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/67534e2633b8a023270e89836bb08797ad80d9cb | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07fcc2ba9fe576ddb55cb488d01da915980444b6 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/a5b9521070135abfadd02ac7b25570c1c860817e | ORPH armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e83b49e5a4733b7b97c05949d721ec0218b4a0cf | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5cb5e3852f4b86bd82d2d985dd29edb0edf00f6a | aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5b2ca2593707b67b969a387c6167428b7380eaac | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/063515ed3309e7cf1564f4b20869a02bc0f9f201 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a7c2dd2762d12e5fd351d6f50bed39cc59310154 | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/479b697c384f447eab9b17e868077e0c3e9ec1fe | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/ebb5033cff73f1454df55cd455706a5342d6ca4c | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/4c286a9c699e8d571924831a52ee572ffd11df03 | i686 | efivar-37 | NOK | http://autobuild.buildroot.net/results/445569510364ee78acecd2b44cbf468803eec4ad | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/98867cd2cfe3420478fe58e985a81e44db5d8d8f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b442c71270242334f613996b8be279a564ca686e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f35dcfbb64d2ddf943dacf3708cfa07f3da038a1 | ORPH aarch64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/09eeebfe88cfcb759921d68527e3cee9c66ceaf4 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3f6f808db1451cb58e2bb5682a2209e585758d88 | arm | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/0fcc3d849570188479bfc3e5823a1b64b053df4b | arceb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/44917339eb5a186e808aedb38346748991d8cee5 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/c68ce0ff58d011f58311458e51a76f2e1c525184 | ORPH powerpc | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/ca4f26d527f060951a5f1efa2e1be998571b765f | powerpc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/3c0ea4fbcd6cc5b5f6642a405f6dbcaae5a30e1a | arceb | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/89c89f029a943c3bbdd90183f62d32441888ffce | powerpc | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/14ec3713420fa064a7894288dc82bb934839d0b6 | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/8c6f2d063fb2c021dd1c14b13f4a6fe4f40c3ff0 | powerpc64 | fs/cpio/cpio.mk:117: /nvmed... | NOK | http://autobuild.buildroot.net/results/471544eed4fb692389b9901e9768c97e64062c36 | arc | fs/cpio/cpio.mk:117: /nvmed... | NOK | http://autobuild.buildroot.net/results/dae1f8d13097d60d7862b4048547bffcf9a2a6dc | arm | fs/cramfs/cramfs.mk:46: /nv... | NOK | http://autobuild.buildroot.net/results/3feb0ea546d3d0af56e0af71ddc407e0e0ed70df | powerpc | fs/ubi/ubi.mk:51: /nvmedata... | NOK | http://autobuild.buildroot.net/results/7d99f367f25786e85220f4507c4579209d2b0b8b | mips | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/62845a9c8ea62f6a0f70aae41f5cc04d5d91eb26 | microblaze | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/d50afee90c4c9b987d1dacdd7232b1a9c7466254 | microblazeel | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/6ea4593d1759ae24c684caa6e726f2fcb133d95f | m68k | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/e8880c664bfcc7385fc99e7a4050cb982dd1d852 | arc | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/56133017f958125b25b6f8b5e14d4b435b453e0f | i686 | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/01964b5a6935a1efa69bec0b24c08a2aeaf388b5 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f03d723155c70a14054f0a8227bc63f863c5208e | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/954a1d87ea4dd03320180c3d26d9fc5e8df1bdbc | sh4aeb | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ee0ea90a094fbbaf9eae987a597a6abb61ee15de | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/48e844aa3d9361205d678ba3ef59d261c68e1d33 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b3bdfcd9373dcbb1bc7e322e34f4ee43b222ab39 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a73daf092a96fbee3b3c22216737b4d21773fbf | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6ce881ce6aa95c287c84b14dc1ad38d314194948 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ba1549748bf313cd7b9c7ccf9783e449a60c941 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f949dc7fd14d5c77ec8502c317bb2dfa7087b97b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e75fb3d6afde6c61d7a5dd4f0c1bb58b7c65cd0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca369e50be89979c14bd41ac6ed8c3177254952a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96cfeb41f741dc158887d7b4e687f31096d2727b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a46e1280083d01a7681978804b2d9cf70cf50b22 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2362c1efad2b313d87320d0e51e4c789086ddc2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dccd3ef6a0b285d9a9a50cbe5d688364b031fc9b | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a8e4140a6d75e714b278ec0ff1d749f11bec53b9 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/aa3dccc92ede2542c40f45956de3fdeb1b7216fe | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/81abc1c12c2a5bd0fc0751ee404098696abf5c6f | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/fc7873a1f23200154790e4f762002d39602b4ba3 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5668c62062850a0beda11cddc12357560ce43b14 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/81b41e2fefb522043c43c0ca12ef148f4930671a | ORPH x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/e947b209fcd9830fe82cd1d8eee1fde83fc42a6d | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/f33617892d890781bba3e8fdf9d6d3782469ece3 | nios2 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/03f4a0869c2a9b80c3b369e33f9aef9cdc09639f | sh4 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/343d920fc7f64654a0e2f39a16aba50655a89970 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/1c7273656e3e32194674f11ff850308c1ae530c2 | mips64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/3e5b167113aee08f8377c8fd402874dd1a9d2eed | sparc64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/db70c0e3d8e6adb4bdacc3043186f18e4c6fbc00 | i686 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcfee5e1ee2e41199cf11769e749e4ce1b1a1418 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4f2a087cd83594addc7cccf462efccee1ef2f3b5 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/218be2f1a86a667ed295526e7c1595fb06462123 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/528b93c8e333f19407817a3cb9c4719806af9b08 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9638cc221d9a17335e2cc9a9872662b8a78887d3 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a9a1919643f529f44a42379844f54b57dd9e5e9 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b576ea88984c877683a1f7ffd53b2e160cce1620 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2150bb870ea60c78546bf6705ba18609f7489bee | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/60b3df8c0b449ef19acfbb5b6b0c8a35dd32263d | xtensa | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/43bcb85cea0bc07933c1c4b173d6c30372226670 | riscv32 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/802865d6d7dccdfa95e52a4fceaf7da7a952188a | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/e8e51c24fe689304d6d0247362d3200a3ce9b034 | mips | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/1d2128d3d0912c349ea0f36a1817a445c9569d39 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/37f81f6c73dec15a38275e3c53c8ca741361285d | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/19c1d6e98d83409e8def04de5af6fa5672183789 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/389cb0becc8946f78388130787843acbdcd17ef2 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ee64bcd961c99ffb73f1cf0a78bb37abbee1f6f3 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2879265e9e605a9fcff795ea5fe19dc355c19f81 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/253f406f3ce58ba7eddca26f7df12ef2e88bc892 | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/aa32b2d532e298b41c9112f2579ceb75e9c53020 | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dcada4a4cf12ec4ceb05a2ba9010230e1fbd7d62 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/da0da8fefe2ff4d41dd738ae81db3e9a6185bfdf | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b023afaafb6068f91f0878388951f6d798172be5 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bf63c696cb3f7c5ebf27d3171b75d53fb1fd0d7e | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/61aef9919f1b74a9625f0859159305c35b441b64 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d0e17ba9e5afecb08fc2abe572003ad8f3d0874c | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7dcd83e29114d5d4ae2954665925a03f9e9eb424 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/697b9c46e7369f6616e44ee7c6db6706ecc9c618 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1774d6fd6a1402c7d9821b5777a4ebd7cd56d9cd | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d6ad839a3c8ced1752ee63cd836bd18ef3118539 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ee0c167d6bf053c14756f995b0183fdda164a9fc | sparc | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/f232b85766813ef5081dce104e62335aaa26c0e8 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29043ebb32614921373b50f05a9b2b9fdc4c7fbf | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ed487fa436bbf0ea39af9f943cc2677148aeaef2 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/b43f439916123fb51c79a7e3da4d4e004f5deda1 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c443c1c73bd5477adf1e6534eb4ed9e606bc4326 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6b8f3eed11461df33677fa8b3ce2c6fc3ca2db9e | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1fc2762372492e0a1b4522dd2c9cddc81497bbfc | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/db505a4f3447f0fc580a226d4df4eb7ed211dca5 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/47d6bc012892d49919464159979a637a7e9f0045 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4c05ea00bebe9bbf43fd893b9bb97adb3db1afd4 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d2ba994ca028937fadca91b9f71d78c561ac8cbe | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8d1bc949aff5471fa6787cc05cb5c037b6669269 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ab5171acb971cf111cd5b1a8ce0cfb903487c5b8 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f0ae99cbc79195cfc03987281cabb242d2bd7b2e | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/26dc0bd36ba9208132f18bc825780b1aac9964e1 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c8c686c439a530d5ff8b1dec02255c380d42f5b1 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87223fd971bb6822b7bc4439d232614aed84b1c0 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6eb10b20e60205b7e0162186af460cd58dfb0608 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f40db7779c64a1ce80f15a7ccf7372d7f32f6e06 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1f0dfc92bc2e256c2c8c66e522694e676ddc82f4 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f4837186b711aa0eec3c3accdbe3e767b7b96b07 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/80414785e46df5d004093ffd9f3be29562792777 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6607dfbd7f6010d215becb3040548d097a5c7dea | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/baeafd80e8bae5af0f1f99bd3a3bea383c65b053 | ORPH powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/425b7a1c17cfaef84500c67e6173c69277a20e75 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1fa20f210efcad65316a0d47b0643e1f749ee4eb | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2e00edd06ee3a48f54853c3ea6e28e3b9c7708c3 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/92ff06db127d6dfa5db260792fcdc3b8b43e9b9c | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/464a05ec4b31f30d12d3618cea37002f118fe905 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c0af5123e0e4c05614c755ce824d3d0482cd212d | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a854b7c96745d9c67a5151e592319f55f71ad335 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/64728d09ebb7e93401c5ce4812bea8b45d8d1f42 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d604d7334355860eaee894e66d711eea0245a286 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b6264c0f914543f3200ff2d1433618b24a8fd1af | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0701290d8711f8075c2e5a3c9069c2b6659cd616 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e794c53e1290fceba1abbf5345163b66226c165d | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1cda27bc60fb3ba6dd53386a16e6813920daa624 | arceb | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/961e85c07651e1fe4092e41743c0e7deeb1d97e7 | arm | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/15f246c658dd7f47a9f1150fe7093c34f668d66e | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/2bcca3f478868d27c81cb75c826b592d4d87a0a2 | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/070fae6c0811ab1edc30fa4834f19a25635db6f6 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/48b95964caa997455329538f46c12aae1c3866df | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0c08d6e18f623121f4cc3a275824a47a8677fd5b | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e9a9d9e98515a45afcf5715c7af31d4310132ff0 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/35e0dd96aa2d92f289918b6421cc68d6a6fc58c8 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8e8b1887563261079baae6496e25d47d373ca948 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/6ab8d05b4ed06a5b05d88823f85ebf115b8c4e72 | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9b0ad13f88ee2ce02b87c08a8640dde0d80d08ff | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/184b76bb42a8f4a88bbf9341676814a46da4f820 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e37230d22cf63b494b8a7360ae32b1bd67fb0dae | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/70946aac067fe67b1aa64842963778ca3390ab29 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/8236639c12c6ed11a12a34afc2eddeda248cbbf7 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/04ba5ea1a5abf2f32debf70ffcb45a723ec90e55 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/956d8aad40f43720420fb34b6c5e8d5f62237b83 | arm | libclc-13.0.1 | NOK | http://autobuild.buildroot.net/results/02b07de42d631ba20d7512f0e3460128e79c3453 | riscv64 | libcuefile-475 | NOK | http://autobuild.buildroot.net/results/b282406d72347e0985fc7ee6d85476cf11d576a4 | ORPH armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/28988fb5873b2dc49629d73931f7df0a9ae75fd0 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c9978e12e97e35862e135c023ae27180a9ae3593 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c541c73e4497f98281386c1e540490e09b473aa1 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ce51349aff7c3a2a395ec9aa2517d940f11d5cfb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/58bd8fc7d2e8c8a4a7ba2ee2bd4c6404d2965d0c | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/6202ca7b2c221fd529df5ae01e8fd1d348ef1016 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/3553379c16fb3df38ca6d312bc7e30eddf5f39eb | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/953b49a94a2c8309eeb975707c6227c5cedf0fad | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4de46a881cc9f3ab75c96e28656eb4262f262304 | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/b97f6b790c34c8c9d2d83eaca694e74a7cc23dcd | microblazeel | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/1482995b5c9acc0888e7b94c1607827a5eddae9e | armeb | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/6aa084f37d7d1f80df789524852dd5f000c8b20d | arm | libsodium-1.0.18 | NOK | http://autobuild.buildroot.net/results/94cca2d29feb877b27f5d614b06666fa6866c4aa | mips64el | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/1311b588f5da09dfeb2d8d94c81ce66854e6ff67 | ORPH microblazeel | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/1f54d6bcc4add3641ee342ba8a1f9a7a9decf4d9 | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/3557398d415d3b82eb9ae5fbfcf0d3cb0a529c0b | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/23d042b4c5ab0edf3ce78d06e8b9a9e1eb217157 | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/1e7d07a4c987e25a427a3ed69296fc573bdf7e06 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/a6aff8fe878d66cb8c39f522d5045aa267966493 | ORPH m68k | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/743074f328c559bdd93ff7cdcdff7b45b7c9d074 | ORPH i586 | linux-tools | NOK | http://autobuild.buildroot.net/results/290af135a7b88019dd2b5575c0dc99d000df9ff6 | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/7bbc915c786cc6394efdf67ced350831747ce963 | ORPH microblazeel | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/917473164a36d1ae5e06f3c48df7bd74fed534c7 | or1k | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/ee7d68ffae54e37ca12711d22b7f622003f2ce6a | mips64el | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/3369cce98327d393fb9bfdd6caa44413694e7db7 | powerpc | luajit-5677985dc1f19cf0a671... | NOK | http://autobuild.buildroot.net/results/3752305d88805c60a2b8f2dee2e0ba1b8aac487b | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/8da283093e97eede71fe0a47e852f18d2fe0f1ee | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1adaad1eabbce38dd4f90eb08e43b080c1b3ffa2 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/64922f0ea992a20c08333b2f0e379c368229f5b0 | powerpc64le | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/9bc4b3747e2740a9f3956df3b155981df8b74d61 | ORPH or1k | mpfr-4.1.0 | NOK | http://autobuild.buildroot.net/results/715fd4508df365085c826690f2be9202c1e987ba | ORPH sparc64 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/efefa680bbcc71055f531982d909fa09cb5c7488 | aarch64_be | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/f31585cbd09cb4286768a5f7750db97d3e715ef6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b08956ec6965a652c0357d0eab198fc430f0017d | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/34c9f694d4b6b485318658d7bde0f63f1cce18b5 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/bc7ffb21a485fc1d308e4d35ee3291cfa2b69696 | ORPH m68k | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/da31815b0ce26a32718fda13b9a040884f6f6b80 | ORPH microblazeel | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/b77782ebd013d0d92cde8104d5a8e1e0ebfb5a91 | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/27d16c8d462e760a0640ba4274ea7c0b699192b1 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/6591829b5d013995d11de28fae0963ea2e02b249 | ORPH arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c14d1991c629577f06fe46dfc3ac7bde1a7fb5ea | nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/ce5a690bd3aecf41dd3726f27ec98adf2dc564f9 | ORPH x86_64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/511d2569f4167f1850ab4a3e5db66fa74f19e467 | armeb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/de01f96ea771495282b13a37396aa21d29496cd7 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/49457592280b3f5cfa645c6acf7ef5417c21ac06 | armeb | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/f02a9c6e89b79ac3fdeb0ab7fa2410db6a75eb58 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/177004d55c0985dbb6ba9833fd5b937201ae529d | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/4c7471d5a93447850a3f71ccf3db32e9ebf5d326 | mips64 | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/1bfaf2cd090df6b5fdcb4826020ee4e73730e2e8 | microblaze | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/a23ad499bbc8c86f67f1990bba711b2fbf6fc11d | ORPH mipsel | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/eb25452ef2985b798b1685e9d7d0663b774f76d7 | ORPH mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c7159cce1492e6c417e98c500cd82055ef1e4a39 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9fef4b95fc9d74e60d253dc1fe61008e3cce1f16 | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/83ad8acec4a3704be3c59e0d6ebe8221349acfbf | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/99f4ce7be2fd34e86c25ad6ba5bb82d4540a0b89 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/53df309eb6e06fe1bf4fb61a9088ea4978a404cd | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/91eff3809dd541b119dcb47ca670b266acdb9c22 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f3effa11311a3f7e6251744ac742bc1cfaa791f4 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ff7cb8035d03b2ebeb9f5f19fd05a426c0de7ca6 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44129b3e39ae06065ae4bc7cc0a03f58aefad8d0 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/19c02f0fb2273ce13e8fc0e5946f853f945fd999 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/763bcb4be8b5cacb4434ea6c8b9fc3727a021fec | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7dcf3911a6d1e01ba1a8104c923e091bd4b12406 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dcdcc11fb59eeebb0f8f996f88fb08595b645e26 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/761a8727308f49ebbb5834ca146b52053d3b6d99 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/874cd9a2ccdbcef12687fecd31fb3cab2a7e24c9 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1552ad833c2d5fe30bdde3919e915c0e01206807 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4513523721b4ea83514addf74d30344a53f250c9 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e9f71174e8bdcc97b60b6fbff4127f98fed84b91 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/1074a46fbf55150be350bd5200ade071641fc07b | mips64el | uboot-tools-2021.07 | NOK | http://autobuild.buildroot.net/results/04c98c76a5ebbea769ef6a81bca2a0079da58b94 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ad5a2e088a728fc2083736ccb82dd5db54fa6ac2 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/0acfefb12e25d9fe9d4990305f67261a82a33eaf | s390x | unknown | NOK | http://autobuild.buildroot.net/results/d0a6130e3964ee7f45c917ddf5c5d2b5dda14d52 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/8f86b40a0156c223f1528a477c477fc92ff9389a | s390x | unknown | NOK | http://autobuild.buildroot.net/results/490d52b343c8ee7cf0e7826f7afca02d4d72107c | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/f7b65b996366304c4d6434ead13f35a4a5460fbb | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/6df9484cdd3533ea0cc21a912370736ab657a468 | arm | unknown | NOK | http://autobuild.buildroot.net/results/09a9882ad40e112cede6243e62c040f4dfc00c20 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/a20bff9663134f4085d610546d059516fca7f410 | arm | unknown | NOK | http://autobuild.buildroot.net/results/7b871a40a88b8df73726aa50bbde0564b4484a82 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/13b7ea099342fef781372a6d3bdf02646aa3749b | arc | unknown | NOK | http://autobuild.buildroot.net/results/5e2979436f0d369cf271e6d1f063aa1a0f830801 | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/e070f61637822548c02f99d3c301ace7d5ac1c18 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/56fa7ebb083179bd80e56df9523c88bf7a426d2d | mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/a16a45a1ab910f060bc112bdf07a7e6dc4932431 | ORPH mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/07dbbf5ea77993155e477e4a4dd45348aff8bd83 | riscv32 | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/fc668ff4cfac851be600daef708815230c68e182 | mips64el | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/5155c4deb1e33e63010a57e030e3d7562632537c | s390x | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/d9d5261215142212cbc7c07afbc6520266fba7ff | armeb | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/38686914f1e3e39c005c3c33081c48c3eb88cd75 | sparc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/b0447679b9eef0f8b8af9a32eadaaaaf28526600 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/10941e203caf16d7bfdbca88e30efb6f6ca5b34f | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/dd40b2702b3bc90260415df1c8f6f04c922527ab | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- unknown | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | unknown | TIM | http://autobuild.buildroot.net/results/e8d99f86a0d21630b969f333f40af517232541f6 | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/2b594a16ef29a91d254bed68aa75c7e08848c846 | Classification of failures by reason for 2022.05.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 docker-proxy-339b972b464ee3... | 1 graphicsmagick-1.3.37 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 sudo-1.9.8p2 | 1 tcf-agent-1.7.0 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e4d212330f63c6b6c1d759395ce401f070ec49e3 | powerpc64le | docker-proxy-339b972b464ee3... | NOK | http://autobuild.buildroot.net/results/b51ba2acaad53fa571c8e5aa190dffccb5a70e53 | nios2 | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/1713b2b8fdcf9b94923d256418f5002c687ef316 | mips64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/09d3b16fdbf63544988951b4e9e170a7436ae10c | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e4fac4d259e26345f7a334388fe90c4f96e2a00b | armeb | sudo-1.9.8p2 | NOK | http://autobuild.buildroot.net/results/ef7198d56c01186a1a8aef60ffa4aead8527dd5d | ORPH microblaze | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/123e03ef6cffbb9dd9985b1a7f78cdbe26e21308 | Gitlab CI results for 2022-09-30 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769645 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769655 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769678 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769683 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769686 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769690 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769694 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769696 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769697 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769700 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769701 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769703 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769709 | freescale_imx8mpevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769759 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769773 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769776 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769777 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769779 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769781 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769783 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769784 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769786 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769787 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769808 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769820 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769821 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769831 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769834 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769836 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769838 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769840 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769841 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769855 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769856 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769857 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769858 | octavo_osd32mp1_brk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769859 | octavo_osd32mp1_red | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769860 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769877 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769880 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769881 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769884 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769885 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769887 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769888 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769893 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769895 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769896 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769898 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769904 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769939 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769942 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769953 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769943 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769944 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769945 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769947 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769946 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769948 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769951 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769950 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769956 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769954 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769958 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769962 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769963 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769964 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769966 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769979 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769982 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769987 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769990 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769991 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770001 | ORPH stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770008 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770009 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770010 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770011 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770012 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770013 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770014 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770030 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770032 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770033 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770034 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770037 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770038 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770039 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770040 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770041 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770042 | -- http://autobuild.buildroot.net From heiko.thiery at gmail.com Sat Oct 1 06:56:09 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Sat, 1 Oct 2022 08:56:09 +0200 Subject: [Buildroot] [PATCH] package/rauc: bump to version 1.8 Message-ID: <20221001065609.28815-1-heiko.thiery@gmail.com> See the release notes[1] on GitHub for changes. [1] https://github.com/rauc/rauc/releases/tag/v1.8 Signed-off-by: Heiko Thiery --- package/rauc/rauc.hash | 5 ++--- package/rauc/rauc.mk | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash index 677d358158..8351d0266e 100644 --- a/package/rauc/rauc.hash +++ b/package/rauc/rauc.hash @@ -1,4 +1,3 @@ -# Locally calculated, after verifying against -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz +# Locally calculated +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk index 8bfb0b79ba..0c81a6cc35 100644 --- a/package/rauc/rauc.mk +++ b/package/rauc/rauc.mk @@ -4,7 +4,7 @@ # ################################################################################ -RAUC_VERSION = 1.7 +RAUC_VERSION = 1.8 RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz RAUC_LICENSE = LGPL-2.1 -- 2.20.1 From peter at korsgaard.com Sat Oct 1 07:48:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 1 Oct 2022 09:48:31 +0200 Subject: [Buildroot] [git commit branch/2022.05.x] package/graphicsmagick: bump to version 1.3.38 Message-ID: <20221001074902.55B1D847A4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3b1cef1c0b6a6b1b2da0892bb8469d12cc403ee1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.05.x License file hash is changed, due to a copyright year change: - Copyright (C) 2002-2021 GraphicsMagick Group + Copyright (C) 2002-2022 GraphicsMagick Group Signed-off-by: Grzegorz Blach Signed-off-by: Thomas Petazzoni (cherry picked from commit f27ea50528755b5f353e3db124dee535645dcf09) Signed-off-by: Peter Korsgaard --- package/graphicsmagick/graphicsmagick.hash | 4 ++-- package/graphicsmagick/graphicsmagick.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/graphicsmagick/graphicsmagick.hash b/package/graphicsmagick/graphicsmagick.hash index cf6d224216..80130da5d6 100644 --- a/package/graphicsmagick/graphicsmagick.hash +++ b/package/graphicsmagick/graphicsmagick.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 90dc22f1a7bd240e4c9065a940962bf13da43c99bcc36cb111cc3c1a0d7477d4 GraphicsMagick-1.3.37.tar.xz -sha256 8a4d960c5a3e453ee21e459e1794c7a0c85559825d3363a8d3b510b3344fdad4 Copyright.txt +sha256 d60cd9db59351d2b9cb19beb443170acaa28f073d13d258f67b3627635e32675 GraphicsMagick-1.3.38.tar.xz +sha256 0a20e661de942ebe115a354d0ec6d1d42b93856ea765f813f350a5ce5024cdb7 Copyright.txt diff --git a/package/graphicsmagick/graphicsmagick.mk b/package/graphicsmagick/graphicsmagick.mk index 38743487eb..dbaa8ddf70 100644 --- a/package/graphicsmagick/graphicsmagick.mk +++ b/package/graphicsmagick/graphicsmagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRAPHICSMAGICK_VERSION = 1.3.37 +GRAPHICSMAGICK_VERSION = 1.3.38 GRAPHICSMAGICK_SOURCE = GraphicsMagick-$(GRAPHICSMAGICK_VERSION).tar.xz GRAPHICSMAGICK_SITE = https://downloads.sourceforge.net/project/graphicsmagick/graphicsmagick/$(GRAPHICSMAGICK_VERSION) GRAPHICSMAGICK_LICENSE = MIT From peter at korsgaard.com Sat Oct 1 07:48:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 1 Oct 2022 09:48:38 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/graphicsmagick: bump to version 1.3.38 Message-ID: <20221001075010.2A15E85CBF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=92938648df013e5990812ff1462a70eddf762f5c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x License file hash is changed, due to a copyright year change: - Copyright (C) 2002-2021 GraphicsMagick Group + Copyright (C) 2002-2022 GraphicsMagick Group Signed-off-by: Grzegorz Blach Signed-off-by: Thomas Petazzoni (cherry picked from commit f27ea50528755b5f353e3db124dee535645dcf09) Signed-off-by: Peter Korsgaard --- package/graphicsmagick/graphicsmagick.hash | 4 ++-- package/graphicsmagick/graphicsmagick.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/graphicsmagick/graphicsmagick.hash b/package/graphicsmagick/graphicsmagick.hash index cf6d224216..80130da5d6 100644 --- a/package/graphicsmagick/graphicsmagick.hash +++ b/package/graphicsmagick/graphicsmagick.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 90dc22f1a7bd240e4c9065a940962bf13da43c99bcc36cb111cc3c1a0d7477d4 GraphicsMagick-1.3.37.tar.xz -sha256 8a4d960c5a3e453ee21e459e1794c7a0c85559825d3363a8d3b510b3344fdad4 Copyright.txt +sha256 d60cd9db59351d2b9cb19beb443170acaa28f073d13d258f67b3627635e32675 GraphicsMagick-1.3.38.tar.xz +sha256 0a20e661de942ebe115a354d0ec6d1d42b93856ea765f813f350a5ce5024cdb7 Copyright.txt diff --git a/package/graphicsmagick/graphicsmagick.mk b/package/graphicsmagick/graphicsmagick.mk index 38743487eb..dbaa8ddf70 100644 --- a/package/graphicsmagick/graphicsmagick.mk +++ b/package/graphicsmagick/graphicsmagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRAPHICSMAGICK_VERSION = 1.3.37 +GRAPHICSMAGICK_VERSION = 1.3.38 GRAPHICSMAGICK_SOURCE = GraphicsMagick-$(GRAPHICSMAGICK_VERSION).tar.xz GRAPHICSMAGICK_SITE = https://downloads.sourceforge.net/project/graphicsmagick/graphicsmagick/$(GRAPHICSMAGICK_VERSION) GRAPHICSMAGICK_LICENSE = MIT From shorne at gmail.com Sat Oct 1 11:35:55 2022 From: shorne at gmail.com (Stafford Horne) Date: Sat, 1 Oct 2022 11:35:55 +0000 Subject: [Buildroot] [PATCH] or1k: Only define TARGET_HAVE_TLS when HAVE_AS_TLS In-Reply-To: <20220929145740.4846-1-shorne@gmail.com> References: <20220929145740.4846-1-shorne@gmail.com> Message-ID: On Thu, Sep 29, 2022 at 03:57:40PM +0100, Stafford Horne wrote: > This was found when testing buildroot with linuxthreads enabled. In > this case, the build passes --disable-tls to the toolchain during > configuration. After building the OpenRISC toolchain it was still > generating TLS code sequences and causing linker failures such as: > > ..../or1k-buildroot-linux-uclibc-gcc -o gpsd-3.24/gpsctl .... -lusb-1.0 -lm -lrt -lnsl > ..../ld: ..../sysroot/usr/lib/libusb-1.0.so: undefined reference to `__tls_get_addr' > > This patch fixes this by disabling tls for the OpenRISC target when requested > via --disable-tls. > > Tested-by: Yann E. MORIN > > gcc/ChangeLog: > > * config/or1k/or1k.cc (TARGET_HAVE_TLS): Only define if > HAVE_AS_TLS is defined. I have pushed this upstream now. Adding buildroot patches should be easy to do now. -Stafford From yann.morin.1998 at free.fr Sat Oct 1 15:56:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 17:56:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <20221001020445.1458953-1-buildroot@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> Message-ID: <20221001155615.GA30794@scaer> Athaariq, All, On 2022-10-01 02:05 +0000, Athaariq Ardhiansyah spake thusly: > Temporary fix for buildroot-specific bug. How is this a buildroot-specific bug? Can you elaborate on that part? If it is really a buildroot-related bug, then we want to understand it, and fix it, not work around it. > Ideally, we should install linux-headers first then glibc. Is this actually possible on Buildroot? This is exactly what we are doing already, and for as long as Buildroot has supported building a glibc-ased toolchain, as the kernel headers are required to build glibc; see package/glibc/glibc.mk at 28: 26 # Before glibc is configured, we must have the first stage 27 # cross-compiler and the kernel headers 28 GLIBC_DEPENDENCIES = host-gcc-initial linux-headers host-bison host-gawk \ > If yes, then we can also fix bug #15021 simultaneously if linux-headers being installed first as possible. This part does not apply (or makes sense), as linux headers *are* installed before glibc is even configured. This issue is really weird, because the glibc commit we are using is supposed to contain the related fixes: $ git los --oneline 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 2628500f5d m68k: Enforce 4-byte alignment on internal locks (BZ #29537) [...] 3bd3c612e9 Linux: Fix enum fsconfig_command detection in bb1e8b0ca9 linux: Fix sys/mount.h usage with kernel headers d48813227b linux: Use compile_c_snippet to check linux/mount.h availability (There are two new commits on the release/2.36/master branch, but they seem unrelated to the issue: 76e05613ee (origin/release/2.36/master) stdlib: Fix __getrandom_nocancel type and arc4random usage (BZ #29638) 227c903587 get_nscd_addresses: Fix subscript typos [BZ #29605] ) To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc 2.36 commit, and even one older than ours, but they do not seem to have issues. So, we'd like to understand why this is causing an issue for us. Hence, if you could elaborate on the firt part of your message, above, that would be extermely useful! Regards, Yann E. MORIN. > Signed-off-by: Athaariq Ardhiansyah > --- > .../0002-fsconfig_command-workaround.patch | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 package/glibc/0002-fsconfig_command-workaround.patch > > diff --git a/package/glibc/0002-fsconfig_command-workaround.patch b/package/glibc/0002-fsconfig_command-workaround.patch > new file mode 100644 > index 0000000000..27dd25b244 > --- /dev/null > +++ b/package/glibc/0002-fsconfig_command-workaround.patch > @@ -0,0 +1,17 @@ > +diff --git a/sysdeps/unix/sysv/linux/sys/mount.h b/sysdeps/unix/sysv/linux/sys/mount.h > +index 19841d0738..43a681d097 100644 > +--- a/sysdeps/unix/sysv/linux/sys/mount.h > ++++ b/sysdeps/unix/sysv/linux/sys/mount.h > +@@ -27,11 +27,7 @@ > + #include > + #include > + > +-#ifdef __has_include > +-# if __has_include ("linux/mount.h") > +-# include "linux/mount.h" > +-# endif > +-#endif > ++#include "linux/mount.h" > + > + > + #define BLOCK_SIZE_BITS 10 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:10:52 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:10:52 +0200 Subject: [Buildroot] [git commit] ltp-testsuite: bump version to 20220930 Message-ID: <20221001161129.E687E8628C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=40c160f5300642379c1c25945301b0eb99237532 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Remove all patches from this release. Signed-off-by: Petr Vorel Signed-off-by: Yann E. MORIN --- .../0002-kvm-Fix-compilation-on-x86.patch | 40 ------ ...x-undefined-reference-to-__stack_chk_fail.patch | 41 ------ ...004-nfs05_make_tree-Restore-5-min-timeout.patch | 31 ----- ...lls-migrate_pages03-restore-runtime-to-5m.patch | 44 ------ ...1-3-wait-for-umount-completed-in-thread_b.patch | 63 --------- .../0007-netstress-Restore-runtime-to-5m.patch | 53 ------- ...ss-Fix-usage-of-variables-from-tst_net.sh.patch | 154 --------------------- ...ional-Fix-usage-of-PAGESIZE-from-memcg_li.patch | 121 ---------------- package/ltp-testsuite/ltp-testsuite.hash | 6 +- package/ltp-testsuite/ltp-testsuite.mk | 2 +- 10 files changed, 4 insertions(+), 551 deletions(-) diff --git a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch b/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch deleted file mode 100644 index 0dfa652eb5..0000000000 --- a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch +++ /dev/null @@ -1,40 +0,0 @@ -From: Petr Vorel -Date: Mon, 6 Jun 2022 20:43:19 +0200 -Subject: [PATCH] kvm: Fix compilation on x86 - -Buildroot supports i386 pentium toolchains (br-i386-pentium-mmx-musl, -br-i386-pentium4-full) which fail to compile because as is run without --32. - -[ upstream status: a471d87ef ("kvm: Fix compilation on x86") ] - -Suggested-by: Martin Doucha -Reviewed-by: Cyril Hrubis -Signed-off-by: Petr Vorel ---- - testcases/kernel/kvm/Makefile | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile -index adab56952..8d5193d8e 100644 ---- a/testcases/kernel/kvm/Makefile -+++ b/testcases/kernel/kvm/Makefile -@@ -17,11 +17,14 @@ FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 - ifeq ($(HOST_CPU),x86_64) - ifneq (,$(findstring m32,$(CFLAGS))) - HOST_CPU = x86 -- GUEST_CFLAGS += -m32 -- ASFLAGS += --32 - endif - endif - -+ifeq ($(HOST_CPU),x86) -+ GUEST_CFLAGS += -m32 -+ ASFLAGS += --32 -+endif -+ - # Some distros enable -pie by default. That breaks KVM payload linking. - ifdef LTP_CFLAGS_NOPIE - GUEST_CFLAGS += -fno-pie --- -2.36.1 - diff --git a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch b/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch deleted file mode 100644 index 07b17d9e4b..0000000000 --- a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: Petr Vorel -Date: Fri, 10 Jun 2022 09:13:09 +0200 -Subject: [PATCH] kvm: Fix undefined reference to __stack_chk_fail() - -Some x86_64 buildroot toolchains (bootlin-x86-64-glibc, -bootlin-x86-64-musl) try to link to __stack_chk_fail(). --nostdlib is not enough, it requires also -fno-stack-protector. - -x86_64-buildroot-linux-gnu/bin/ld: /tmp/ccgBXEoR.o: in function `handle_page_fault': -kvm_pagefault01.c:(.text+0x5d): undefined reference to `__stack_chk_fail' -collect2: error: ld returned 1 exit status - -[ upstream status: 1a51aa710 ("kvm: Fix undefined reference to __stack_chk_fail()") ] - -Suggested-by: Martin Doucha -Reviewed-by: Cyril Hrubis -Reviewed-by: Martin Doucha -Reviewed-by: Thomas Petazzoni -Reviewed-by: Joerg Vehlow -Tested-by: Joerg Vehlow -Signed-off-by: Petr Vorel ---- - testcases/kernel/kvm/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile -index 8d5193d8e..c5a09719c 100644 ---- a/testcases/kernel/kvm/Makefile -+++ b/testcases/kernel/kvm/Makefile -@@ -9,7 +9,7 @@ ASFLAGS = - CPPFLAGS += -I$(abs_srcdir)/include - GUEST_CPPFLAGS = $(CPPFLAGS) -DCOMPILE_PAYLOAD - GUEST_CFLAGS = -ffreestanding -O2 -Wall -fno-asynchronous-unwind-tables -mno-mmx -mno-sse --GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -+GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -fno-stack-protector - GUEST_LDLIBS = - - FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 --- -2.36.1 - diff --git a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch b/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch deleted file mode 100644 index c12449d814..0000000000 --- a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 463da729537faa6d5ef206912fdec871c1059dac Mon Sep 17 00:00:00 2001 -From: Petr Vorel -Date: Thu, 16 Jun 2022 16:33:31 +0200 -Subject: [PATCH] nfs05_make_tree: Restore 5 min timeout - -nfs05_make_tree is a long running test. The previous default timeout 5 -min was enough after reducing runtime in 05be61cf6. - -But the new default 30 sec introduced in the concept of max runtime is -definitely not enough. Restore the previous timeout 5 min. - -Signed-off-by: Petr Vorel - -[ upstream status: 463da729537faa6d5ef206912fdec871c1059dac ] ---- - testcases/network/nfs/nfs_stress/nfs05_make_tree.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -index fdc13bd5d..5456c1bf0 100644 ---- a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -+++ b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -@@ -215,4 +215,5 @@ static struct tst_test test = { - .options = opts, - .test_all = do_test, - .setup = setup, -+ .max_runtime = 300, - }; --- -2.37.1 - diff --git a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch b/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch deleted file mode 100644 index 8229f98d26..0000000000 --- a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 9fb28002bb2ce988b99d1756ff7b902f76e3472a Mon Sep 17 00:00:00 2001 -From: Jan Stancek -Date: Tue, 21 Jun 2022 10:37:17 +0200 -Subject: [PATCH] syscalls/migrate_pages03: restore runtime to 5m - -Arches with large pages have trouble completing all loops in 30s, -restore runtime to 5m. Also check for remaining runtime and -exit if we run out. - -Signed-off-by: Jan Stancek -Reviewed-by: Cyril Hrubis -Signed-off-by: Li Wang -[ upstream status: 9fb28002bb2ce988b99d1756ff7b902f76e3472a ] ---- - testcases/kernel/syscalls/migrate_pages/migrate_pages03.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -index c6afb4cce..2866c96e6 100644 ---- a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -+++ b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -@@ -127,6 +127,11 @@ static void migrate_test(void) - tst_res(TFAIL | TERRNO, "migrate_pages() failed"); - return; - } -+ -+ if (!tst_remaining_runtime()) { -+ tst_res(TINFO, "Out of runtime, exitting..."); -+ break; -+ } - } - SAFE_SETEUID(0); - -@@ -134,6 +139,7 @@ static void migrate_test(void) - } - - static struct tst_test test = { -+ .max_runtime = 300, - .min_kver = "2.6.32", - .needs_root = 1, - .setup = setup, --- -2.37.1 - diff --git a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch b/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch deleted file mode 100644 index 73904806fd..0000000000 --- a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 6d4c8343d33e7d8fa059246310413f029a9e8573 Mon Sep 17 00:00:00 2001 -From: Li Wang -Date: Thu, 7 Jul 2022 17:38:45 +0800 -Subject: [PATCH] mountns0[1-3]: wait for umount completed in thread_b - -To get rid of race condition (occurs with umount_folders): - - mountns01.c:42: TPASS: shared mount in parent passed - mountns01.c:83: TPASS: shared mount in child passed - tst_device.c:394: TWARN: umount('B') failed with EINVAL - mountns.h:39: TWARN: umount(B) failed: EINVAL (22) - -Signed-off-by: Li Wang -Reviewed-by: Yang Xu -[ upstream status: 6d4c8343d33e7d8fa059246310413f029a9e8573 ] ---- - testcases/kernel/containers/mountns/mountns01.c | 2 ++ - testcases/kernel/containers/mountns/mountns02.c | 2 ++ - testcases/kernel/containers/mountns/mountns03.c | 2 ++ - 3 files changed, 6 insertions(+) - -diff --git a/testcases/kernel/containers/mountns/mountns01.c b/testcases/kernel/containers/mountns/mountns01.c -index e99134aba..e8f176920 100644 ---- a/testcases/kernel/containers/mountns/mountns01.c -+++ b/testcases/kernel/containers/mountns/mountns01.c -@@ -86,6 +86,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - -diff --git a/testcases/kernel/containers/mountns/mountns02.c b/testcases/kernel/containers/mountns/mountns02.c -index 258b61217..4b85fa79b 100644 ---- a/testcases/kernel/containers/mountns/mountns02.c -+++ b/testcases/kernel/containers/mountns/mountns02.c -@@ -87,6 +87,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - -diff --git a/testcases/kernel/containers/mountns/mountns03.c b/testcases/kernel/containers/mountns/mountns03.c -index f37ae7902..1d26a25d8 100644 ---- a/testcases/kernel/containers/mountns/mountns03.c -+++ b/testcases/kernel/containers/mountns/mountns03.c -@@ -97,6 +97,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - --- -2.37.1 - diff --git a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch b/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch deleted file mode 100644 index acaccf1e1f..0000000000 --- a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch +++ /dev/null @@ -1,53 +0,0 @@ -From cc4a27c235d0cf69a55cd8829b232566b0223333 Mon Sep 17 00:00:00 2001 -From: Petr Vorel -Date: Wed, 13 Jul 2022 09:46:14 +0200 -Subject: [PATCH] netstress: Restore runtime to 5m - -netstress requires the previous default timeout 5m due longer timeout -for higher message sizes (e.g. 65535): - -./sctp_ipsec.sh -6 -p comp -m transport -s 100:1000:65535:R65535 -sctp_ipsec 1 TPASS: netstress passed, median time 5 ms, data: 5 9 6 5 5 -sctp_ipsec 2 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' -sctp_ipsec 2 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 1000 -N 1000 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times -sctp_ipsec 2 TPASS: netstress passed, median time 6 ms, data: 8 6 6 5 6 -sctp_ipsec 3 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' -sctp_ipsec 3 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 65535 -N 65535 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times -sctp_ipsec 3 TWARN: netstress failed, ret: 2 -tst_test.c:1526: TINFO: Timeout per run is 0h 00m 30s -netstress.c:896: TINFO: IP_BIND_ADDRESS_NO_PORT is used -netstress.c:898: TINFO: connection: addr 'fd00:1:1:1::1', port '55097' -netstress.c:900: TINFO: client max req: 100 -netstress.c:901: TINFO: clients num: 2 -netstress.c:906: TINFO: client msg size: 65535 -netstress.c:907: TINFO: server msg size: 65535 -netstress.c:979: TINFO: SCTP client -netstress.c:475: TINFO: Running the test over IPv6 -Test timeouted, sending SIGKILL! -tst_test.c:1577: TINFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 -tst_test.c:1579: TBROK: Test killed! (timeout?) - -Converting netstress.c to use TST_NO_DEFAULT_MAIN (i.e. implementing main) -would require more changes, because it uses .forks_child, .needs_checkpoints, -cleanup function. - -Signed-off-by: Petr Vorel -[ upstream status: cc4a27c235d0cf69a55cd8829b232566b0223333 ] ---- - testcases/network/netstress/netstress.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/testcases/network/netstress/netstress.c b/testcases/network/netstress/netstress.c -index 6c9e83112..7c222531d 100644 ---- a/testcases/network/netstress/netstress.c -+++ b/testcases/network/netstress/netstress.c -@@ -1028,5 +1028,6 @@ static struct tst_test test = { - {"B:", &server_bg, "Run in background, arg is the process directory"}, - {} - }, -+ .max_runtime = 300, - .needs_checkpoints = 1, - }; --- -2.37.1 - diff --git a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch b/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch deleted file mode 100644 index ba187366ff..0000000000 --- a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch +++ /dev/null @@ -1,154 +0,0 @@ -From 33c156e295e35d4839a135d8ba5db485b7712ced Mon Sep 17 00:00:00 2001 -From: Joerg Vehlow -Date: Mon, 27 Jun 2022 09:27:09 +0200 -Subject: [PATCH] net_stress: Fix usage of variables from tst_net.sh - -These tests use variables (NS_TIMES, IP_TOTAL, ROUTE_TOTAL -and IF_UPDOWN_TIMES) from tst_net.sh, before sourcing it. - -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") - -Reviewed-by: Petr Vorel -Signed-off-by: Joerg Vehlow -[ upstream status: 33c156e295e35d4839a135d8ba5db485b7712ced ] ---- - testcases/network/stress/interface/if-addr-adddel.sh | 7 ++++--- - testcases/network/stress/interface/if-addr-addlarge.sh | 7 ++++--- - testcases/network/stress/interface/if-route-adddel.sh | 5 +++-- - testcases/network/stress/interface/if-route-addlarge.sh | 5 +++-- - testcases/network/stress/interface/if-updown.sh | 5 +++-- - testcases/network/stress/interface/if4-addr-change.sh | 4 +++- - 6 files changed, 20 insertions(+), 13 deletions(-) - -diff --git a/testcases/network/stress/interface/if-addr-adddel.sh b/testcases/network/stress/interface/if-addr-adddel.sh -index cb453e612..0750501f0 100755 ---- a/testcases/network/stress/interface/if-addr-adddel.sh -+++ b/testcases/network/stress/interface/if-addr-adddel.sh -@@ -7,9 +7,6 @@ - - IF_CMD='ifconfig' - --# The interval of the check interface activity --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -89,4 +86,8 @@ test_body() - } - - . if-lib.sh -+ -+# The interval of the check interface activity -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-addr-addlarge.sh b/testcases/network/stress/interface/if-addr-addlarge.sh -index 3c876c17d..d0759c86b 100755 ---- a/testcases/network/stress/interface/if-addr-addlarge.sh -+++ b/testcases/network/stress/interface/if-addr-addlarge.sh -@@ -7,9 +7,6 @@ - - IF_CMD='ifconfig' - --# The interval of the check interface activity --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -110,4 +107,8 @@ test_body() - } - - . if-lib.sh -+ -+# The interval of the check interface activity -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-route-adddel.sh b/testcases/network/stress/interface/if-route-adddel.sh -index b50da268a..51445e4f7 100755 ---- a/testcases/network/stress/interface/if-route-adddel.sh -+++ b/testcases/network/stress/interface/if-route-adddel.sh -@@ -7,8 +7,6 @@ - - IF_CMD='route' - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -64,4 +62,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-route-addlarge.sh b/testcases/network/stress/interface/if-route-addlarge.sh -index 7d09d1216..355b6b4ab 100755 ---- a/testcases/network/stress/interface/if-route-addlarge.sh -+++ b/testcases/network/stress/interface/if-route-addlarge.sh -@@ -7,8 +7,6 @@ - - IF_CMD='route' - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -76,4 +74,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-updown.sh b/testcases/network/stress/interface/if-updown.sh -index 9a5709c85..71c78d785 100755 ---- a/testcases/network/stress/interface/if-updown.sh -+++ b/testcases/network/stress/interface/if-updown.sh -@@ -8,8 +8,6 @@ - IF_CMD='ifconfig' - TST_CLEANUP="if_cleanup_restore" - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -47,4 +45,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if4-addr-change.sh b/testcases/network/stress/interface/if4-addr-change.sh -index b9ece2af9..f162e6a51 100755 ---- a/testcases/network/stress/interface/if4-addr-change.sh -+++ b/testcases/network/stress/interface/if4-addr-change.sh -@@ -9,7 +9,6 @@ TST_CLEANUP="do_cleanup" - TST_TESTFUNC="test_body" - TST_NEEDS_CMDS="ifconfig" - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} - # Maximum host portion of the IPv4 address on the local host - LHOST_IPV4_HOST_MAX="254" - -@@ -61,4 +60,7 @@ test_body() - } - - . tst_net.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run --- -2.37.1 - diff --git a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch b/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch deleted file mode 100644 index 6cc36cda79..0000000000 --- a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch +++ /dev/null @@ -1,121 +0,0 @@ -From bda92ad659a52d38ac810099f69adff626b064c6 Mon Sep 17 00:00:00 2001 -From: Joerg Vehlow -Date: Mon, 27 Jun 2022 10:44:49 +0200 -Subject: [PATCH] memcg/functional: Fix usage of PAGESIZE from memcg_lib.sh - -$PAGESIZES is set in memcg_lib.sh, which was moved to the bottom of the file. - -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") - -Reviewed-by: Petr Vorel -Signed-off-by: Joerg Vehlow -[ upstream status: bda92ad659a52d38ac810099f69adff626b064c6 ] ---- - .../controllers/memcg/functional/memcg_failcnt.sh | 7 ++++--- - .../memcg/functional/memcg_max_usage_in_bytes_test.sh | 10 +++++----- - .../memcg/functional/memcg_subgroup_charge.sh | 8 ++++---- - .../memcg/functional/memcg_usage_in_bytes_test.sh | 10 +++++----- - 4 files changed, 18 insertions(+), 17 deletions(-) - -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -index 1fed01569..1be98a056 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -@@ -12,9 +12,6 @@ MEMCG_TESTFUNC=test - MEMCG_SHMMAX=1 - TST_TEST_DATA="--mmap-anon --mmap-file --shm" - --MEMORY_LIMIT=$PAGESIZE --MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) -- - test() - { - ROD echo $MEMORY_LIMIT \> memory.limit_in_bytes -@@ -36,4 +33,8 @@ test() - } - - . memcg_lib.sh -+ -+MEMORY_LIMIT=$PAGESIZE -+MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -index d1ffbe053..302810513 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -@@ -9,11 +9,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=4 - -- --MEM_TO_ALLOC=$((PAGESIZE * 1024)) --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -- - # Run test cases which checks memory.[memsw.]max_usage_in_bytes after make - # some memory allocation - test_max_usage_in_bytes() -@@ -88,4 +83,9 @@ test4() - } - - . memcg_lib.sh -+ -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -index 08b6697d4..9bcc01258 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -@@ -12,10 +12,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=3 - -- --# Allocate memory bigger than per-cpu kernel memory --MEM_TO_ALLOC=$((PAGESIZES * 2)) -- - # Test the memory charge won't move to subgroup - # $1 - memory.limit_in_bytes in sub group - test_subgroup() -@@ -67,4 +63,8 @@ test3() - } - - . memcg_lib.sh -+ -+# Allocate memory bigger than per-cpu kernel memory -+MEM_TO_ALLOC=$((PAGESIZES * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -index 6f932124e..125d88e55 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -@@ -9,11 +9,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=2 - -- --MEM_TO_ALLOC=$((PAGESIZE * 1024)) --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -- - test1() - { - tst_res TINFO "Test memory.usage_in_bytes" -@@ -35,4 +30,9 @@ test2() - } - - . memcg_lib.sh -+ -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -+ - tst_run --- -2.37.1 - diff --git a/package/ltp-testsuite/ltp-testsuite.hash b/package/ltp-testsuite/ltp-testsuite.hash index e13661c08c..8b411a8ffe 100644 --- a/package/ltp-testsuite/ltp-testsuite.hash +++ b/package/ltp-testsuite/ltp-testsuite.hash @@ -1,5 +1,5 @@ -# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.xz.sha1 -sha1 9741b6938ca79ad1f4bea32788a483f86d12fd65 ltp-full-20220527.tar.xz +# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.bz2.sha1 +sha1 c8d658cd3ab1f5a5c7b5bf56398d3a9525012c6b ltp-full-20220930.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING -sha256 d635afb5ec7b0de763ab50713baf9fbf65cf089da6e6768f816e4a166cbd17c4 ltp-full-20220527.tar.xz +sha256 533ab63915b916640667ecce17ee4998006d80d394d4b1f1d105a7aa1df50d38 ltp-full-20220930.tar.xz diff --git a/package/ltp-testsuite/ltp-testsuite.mk b/package/ltp-testsuite/ltp-testsuite.mk index 23be3d25c9..34412d562f 100644 --- a/package/ltp-testsuite/ltp-testsuite.mk +++ b/package/ltp-testsuite/ltp-testsuite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LTP_TESTSUITE_VERSION = 20220527 +LTP_TESTSUITE_VERSION = 20220930 LTP_TESTSUITE_SOURCE = ltp-full-$(LTP_TESTSUITE_VERSION).tar.xz LTP_TESTSUITE_SITE = https://github.com/linux-test-project/ltp/releases/download/$(LTP_TESTSUITE_VERSION) From yann.morin.1998 at free.fr Sat Oct 1 16:11:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:11:44 +0200 Subject: [Buildroot] [PATCH 1/1] ltp-testsuite: bump version to 20220930 In-Reply-To: <20220930181741.8749-1-pevik@seznam.cz> References: <20220930181741.8749-1-pevik@seznam.cz> Message-ID: <20221001161144.GB30794@scaer> Petr, All, On 2022-09-30 20:17 +0200, Petr Vorel spake thusly: > From: Petr Vorel > > Remove all patches from this release. > > Signed-off-by: Petr Vorel Applied to master, thanks. > --- > .../0002-kvm-Fix-compilation-on-x86.patch | 40 ----- > ...efined-reference-to-__stack_chk_fail.patch | 41 ----- > ...fs05_make_tree-Restore-5-min-timeout.patch | 31 ---- > ...igrate_pages03-restore-runtime-to-5m.patch | 44 ----- > ...ait-for-umount-completed-in-thread_b.patch | 63 ------- > ...0007-netstress-Restore-runtime-to-5m.patch | 53 ------ > ...x-usage-of-variables-from-tst_net.sh.patch | 154 ------------------ > ...-Fix-usage-of-PAGESIZE-from-memcg_li.patch | 121 -------------- > package/ltp-testsuite/ltp-testsuite.hash | 6 +- > package/ltp-testsuite/ltp-testsuite.mk | 2 +- > 10 files changed, 4 insertions(+), 551 deletions(-) > delete mode 100644 package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > delete mode 100644 package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > delete mode 100644 package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > delete mode 100644 package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > delete mode 100644 package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > delete mode 100644 package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > delete mode 100644 package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > delete mode 100644 package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > > diff --git a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch b/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > deleted file mode 100644 > index 0dfa652eb5..0000000000 > --- a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > +++ /dev/null > @@ -1,40 +0,0 @@ > -From: Petr Vorel > -Date: Mon, 6 Jun 2022 20:43:19 +0200 > -Subject: [PATCH] kvm: Fix compilation on x86 > - > -Buildroot supports i386 pentium toolchains (br-i386-pentium-mmx-musl, > -br-i386-pentium4-full) which fail to compile because as is run without --32. > - > -[ upstream status: a471d87ef ("kvm: Fix compilation on x86") ] > - > -Suggested-by: Martin Doucha > -Reviewed-by: Cyril Hrubis > -Signed-off-by: Petr Vorel > ---- > - testcases/kernel/kvm/Makefile | 7 +++++-- > - 1 file changed, 5 insertions(+), 2 deletions(-) > - > -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile > -index adab56952..8d5193d8e 100644 > ---- a/testcases/kernel/kvm/Makefile > -+++ b/testcases/kernel/kvm/Makefile > -@@ -17,11 +17,14 @@ FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 > - ifeq ($(HOST_CPU),x86_64) > - ifneq (,$(findstring m32,$(CFLAGS))) > - HOST_CPU = x86 > -- GUEST_CFLAGS += -m32 > -- ASFLAGS += --32 > - endif > - endif > - > -+ifeq ($(HOST_CPU),x86) > -+ GUEST_CFLAGS += -m32 > -+ ASFLAGS += --32 > -+endif > -+ > - # Some distros enable -pie by default. That breaks KVM payload linking. > - ifdef LTP_CFLAGS_NOPIE > - GUEST_CFLAGS += -fno-pie > --- > -2.36.1 > - > diff --git a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch b/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > deleted file mode 100644 > index 07b17d9e4b..0000000000 > --- a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > +++ /dev/null > @@ -1,41 +0,0 @@ > -From: Petr Vorel > -Date: Fri, 10 Jun 2022 09:13:09 +0200 > -Subject: [PATCH] kvm: Fix undefined reference to __stack_chk_fail() > - > -Some x86_64 buildroot toolchains (bootlin-x86-64-glibc, > -bootlin-x86-64-musl) try to link to __stack_chk_fail(). > --nostdlib is not enough, it requires also -fno-stack-protector. > - > -x86_64-buildroot-linux-gnu/bin/ld: /tmp/ccgBXEoR.o: in function `handle_page_fault': > -kvm_pagefault01.c:(.text+0x5d): undefined reference to `__stack_chk_fail' > -collect2: error: ld returned 1 exit status > - > -[ upstream status: 1a51aa710 ("kvm: Fix undefined reference to __stack_chk_fail()") ] > - > -Suggested-by: Martin Doucha > -Reviewed-by: Cyril Hrubis > -Reviewed-by: Martin Doucha > -Reviewed-by: Thomas Petazzoni > -Reviewed-by: Joerg Vehlow > -Tested-by: Joerg Vehlow > -Signed-off-by: Petr Vorel > ---- > - testcases/kernel/kvm/Makefile | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile > -index 8d5193d8e..c5a09719c 100644 > ---- a/testcases/kernel/kvm/Makefile > -+++ b/testcases/kernel/kvm/Makefile > -@@ -9,7 +9,7 @@ ASFLAGS = > - CPPFLAGS += -I$(abs_srcdir)/include > - GUEST_CPPFLAGS = $(CPPFLAGS) -DCOMPILE_PAYLOAD > - GUEST_CFLAGS = -ffreestanding -O2 -Wall -fno-asynchronous-unwind-tables -mno-mmx -mno-sse > --GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none > -+GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -fno-stack-protector > - GUEST_LDLIBS = > - > - FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 > --- > -2.36.1 > - > diff --git a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch b/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > deleted file mode 100644 > index c12449d814..0000000000 > --- a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > +++ /dev/null > @@ -1,31 +0,0 @@ > -From 463da729537faa6d5ef206912fdec871c1059dac Mon Sep 17 00:00:00 2001 > -From: Petr Vorel > -Date: Thu, 16 Jun 2022 16:33:31 +0200 > -Subject: [PATCH] nfs05_make_tree: Restore 5 min timeout > - > -nfs05_make_tree is a long running test. The previous default timeout 5 > -min was enough after reducing runtime in 05be61cf6. > - > -But the new default 30 sec introduced in the concept of max runtime is > -definitely not enough. Restore the previous timeout 5 min. > - > -Signed-off-by: Petr Vorel > - > -[ upstream status: 463da729537faa6d5ef206912fdec871c1059dac ] > ---- > - testcases/network/nfs/nfs_stress/nfs05_make_tree.c | 1 + > - 1 file changed, 1 insertion(+) > - > -diff --git a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -index fdc13bd5d..5456c1bf0 100644 > ---- a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -+++ b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -@@ -215,4 +215,5 @@ static struct tst_test test = { > - .options = opts, > - .test_all = do_test, > - .setup = setup, > -+ .max_runtime = 300, > - }; > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch b/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > deleted file mode 100644 > index 8229f98d26..0000000000 > --- a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > +++ /dev/null > @@ -1,44 +0,0 @@ > -From 9fb28002bb2ce988b99d1756ff7b902f76e3472a Mon Sep 17 00:00:00 2001 > -From: Jan Stancek > -Date: Tue, 21 Jun 2022 10:37:17 +0200 > -Subject: [PATCH] syscalls/migrate_pages03: restore runtime to 5m > - > -Arches with large pages have trouble completing all loops in 30s, > -restore runtime to 5m. Also check for remaining runtime and > -exit if we run out. > - > -Signed-off-by: Jan Stancek > -Reviewed-by: Cyril Hrubis > -Signed-off-by: Li Wang > -[ upstream status: 9fb28002bb2ce988b99d1756ff7b902f76e3472a ] > ---- > - testcases/kernel/syscalls/migrate_pages/migrate_pages03.c | 6 ++++++ > - 1 file changed, 6 insertions(+) > - > -diff --git a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -index c6afb4cce..2866c96e6 100644 > ---- a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -+++ b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -@@ -127,6 +127,11 @@ static void migrate_test(void) > - tst_res(TFAIL | TERRNO, "migrate_pages() failed"); > - return; > - } > -+ > -+ if (!tst_remaining_runtime()) { > -+ tst_res(TINFO, "Out of runtime, exitting..."); > -+ break; > -+ } > - } > - SAFE_SETEUID(0); > - > -@@ -134,6 +139,7 @@ static void migrate_test(void) > - } > - > - static struct tst_test test = { > -+ .max_runtime = 300, > - .min_kver = "2.6.32", > - .needs_root = 1, > - .setup = setup, > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch b/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > deleted file mode 100644 > index 73904806fd..0000000000 > --- a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > +++ /dev/null > @@ -1,63 +0,0 @@ > -From 6d4c8343d33e7d8fa059246310413f029a9e8573 Mon Sep 17 00:00:00 2001 > -From: Li Wang > -Date: Thu, 7 Jul 2022 17:38:45 +0800 > -Subject: [PATCH] mountns0[1-3]: wait for umount completed in thread_b > - > -To get rid of race condition (occurs with umount_folders): > - > - mountns01.c:42: TPASS: shared mount in parent passed > - mountns01.c:83: TPASS: shared mount in child passed > - tst_device.c:394: TWARN: umount('B') failed with EINVAL > - mountns.h:39: TWARN: umount(B) failed: EINVAL (22) > - > -Signed-off-by: Li Wang > -Reviewed-by: Yang Xu > -[ upstream status: 6d4c8343d33e7d8fa059246310413f029a9e8573 ] > ---- > - testcases/kernel/containers/mountns/mountns01.c | 2 ++ > - testcases/kernel/containers/mountns/mountns02.c | 2 ++ > - testcases/kernel/containers/mountns/mountns03.c | 2 ++ > - 3 files changed, 6 insertions(+) > - > -diff --git a/testcases/kernel/containers/mountns/mountns01.c b/testcases/kernel/containers/mountns/mountns01.c > -index e99134aba..e8f176920 100644 > ---- a/testcases/kernel/containers/mountns/mountns01.c > -+++ b/testcases/kernel/containers/mountns/mountns01.c > -@@ -86,6 +86,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > -diff --git a/testcases/kernel/containers/mountns/mountns02.c b/testcases/kernel/containers/mountns/mountns02.c > -index 258b61217..4b85fa79b 100644 > ---- a/testcases/kernel/containers/mountns/mountns02.c > -+++ b/testcases/kernel/containers/mountns/mountns02.c > -@@ -87,6 +87,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > -diff --git a/testcases/kernel/containers/mountns/mountns03.c b/testcases/kernel/containers/mountns/mountns03.c > -index f37ae7902..1d26a25d8 100644 > ---- a/testcases/kernel/containers/mountns/mountns03.c > -+++ b/testcases/kernel/containers/mountns/mountns03.c > -@@ -97,6 +97,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch b/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > deleted file mode 100644 > index acaccf1e1f..0000000000 > --- a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > +++ /dev/null > @@ -1,53 +0,0 @@ > -From cc4a27c235d0cf69a55cd8829b232566b0223333 Mon Sep 17 00:00:00 2001 > -From: Petr Vorel > -Date: Wed, 13 Jul 2022 09:46:14 +0200 > -Subject: [PATCH] netstress: Restore runtime to 5m > - > -netstress requires the previous default timeout 5m due longer timeout > -for higher message sizes (e.g. 65535): > - > -./sctp_ipsec.sh -6 -p comp -m transport -s 100:1000:65535:R65535 > -sctp_ipsec 1 TPASS: netstress passed, median time 5 ms, data: 5 9 6 5 5 > -sctp_ipsec 2 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' > -sctp_ipsec 2 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 1000 -N 1000 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times > -sctp_ipsec 2 TPASS: netstress passed, median time 6 ms, data: 8 6 6 5 6 > -sctp_ipsec 3 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' > -sctp_ipsec 3 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 65535 -N 65535 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times > -sctp_ipsec 3 TWARN: netstress failed, ret: 2 > -tst_test.c:1526: TINFO: Timeout per run is 0h 00m 30s > -netstress.c:896: TINFO: IP_BIND_ADDRESS_NO_PORT is used > -netstress.c:898: TINFO: connection: addr 'fd00:1:1:1::1', port '55097' > -netstress.c:900: TINFO: client max req: 100 > -netstress.c:901: TINFO: clients num: 2 > -netstress.c:906: TINFO: client msg size: 65535 > -netstress.c:907: TINFO: server msg size: 65535 > -netstress.c:979: TINFO: SCTP client > -netstress.c:475: TINFO: Running the test over IPv6 > -Test timeouted, sending SIGKILL! > -tst_test.c:1577: TINFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 > -tst_test.c:1579: TBROK: Test killed! (timeout?) > - > -Converting netstress.c to use TST_NO_DEFAULT_MAIN (i.e. implementing main) > -would require more changes, because it uses .forks_child, .needs_checkpoints, > -cleanup function. > - > -Signed-off-by: Petr Vorel > -[ upstream status: cc4a27c235d0cf69a55cd8829b232566b0223333 ] > ---- > - testcases/network/netstress/netstress.c | 1 + > - 1 file changed, 1 insertion(+) > - > -diff --git a/testcases/network/netstress/netstress.c b/testcases/network/netstress/netstress.c > -index 6c9e83112..7c222531d 100644 > ---- a/testcases/network/netstress/netstress.c > -+++ b/testcases/network/netstress/netstress.c > -@@ -1028,5 +1028,6 @@ static struct tst_test test = { > - {"B:", &server_bg, "Run in background, arg is the process directory"}, > - {} > - }, > -+ .max_runtime = 300, > - .needs_checkpoints = 1, > - }; > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch b/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > deleted file mode 100644 > index ba187366ff..0000000000 > --- a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > +++ /dev/null > @@ -1,154 +0,0 @@ > -From 33c156e295e35d4839a135d8ba5db485b7712ced Mon Sep 17 00:00:00 2001 > -From: Joerg Vehlow > -Date: Mon, 27 Jun 2022 09:27:09 +0200 > -Subject: [PATCH] net_stress: Fix usage of variables from tst_net.sh > - > -These tests use variables (NS_TIMES, IP_TOTAL, ROUTE_TOTAL > -and IF_UPDOWN_TIMES) from tst_net.sh, before sourcing it. > - > -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") > - > -Reviewed-by: Petr Vorel > -Signed-off-by: Joerg Vehlow > -[ upstream status: 33c156e295e35d4839a135d8ba5db485b7712ced ] > ---- > - testcases/network/stress/interface/if-addr-adddel.sh | 7 ++++--- > - testcases/network/stress/interface/if-addr-addlarge.sh | 7 ++++--- > - testcases/network/stress/interface/if-route-adddel.sh | 5 +++-- > - testcases/network/stress/interface/if-route-addlarge.sh | 5 +++-- > - testcases/network/stress/interface/if-updown.sh | 5 +++-- > - testcases/network/stress/interface/if4-addr-change.sh | 4 +++- > - 6 files changed, 20 insertions(+), 13 deletions(-) > - > -diff --git a/testcases/network/stress/interface/if-addr-adddel.sh b/testcases/network/stress/interface/if-addr-adddel.sh > -index cb453e612..0750501f0 100755 > ---- a/testcases/network/stress/interface/if-addr-adddel.sh > -+++ b/testcases/network/stress/interface/if-addr-adddel.sh > -@@ -7,9 +7,6 @@ > - > - IF_CMD='ifconfig' > - > --# The interval of the check interface activity > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -89,4 +86,8 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+# The interval of the check interface activity > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-addr-addlarge.sh b/testcases/network/stress/interface/if-addr-addlarge.sh > -index 3c876c17d..d0759c86b 100755 > ---- a/testcases/network/stress/interface/if-addr-addlarge.sh > -+++ b/testcases/network/stress/interface/if-addr-addlarge.sh > -@@ -7,9 +7,6 @@ > - > - IF_CMD='ifconfig' > - > --# The interval of the check interface activity > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -110,4 +107,8 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+# The interval of the check interface activity > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-route-adddel.sh b/testcases/network/stress/interface/if-route-adddel.sh > -index b50da268a..51445e4f7 100755 > ---- a/testcases/network/stress/interface/if-route-adddel.sh > -+++ b/testcases/network/stress/interface/if-route-adddel.sh > -@@ -7,8 +7,6 @@ > - > - IF_CMD='route' > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -64,4 +62,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-route-addlarge.sh b/testcases/network/stress/interface/if-route-addlarge.sh > -index 7d09d1216..355b6b4ab 100755 > ---- a/testcases/network/stress/interface/if-route-addlarge.sh > -+++ b/testcases/network/stress/interface/if-route-addlarge.sh > -@@ -7,8 +7,6 @@ > - > - IF_CMD='route' > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -76,4 +74,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-updown.sh b/testcases/network/stress/interface/if-updown.sh > -index 9a5709c85..71c78d785 100755 > ---- a/testcases/network/stress/interface/if-updown.sh > -+++ b/testcases/network/stress/interface/if-updown.sh > -@@ -8,8 +8,6 @@ > - IF_CMD='ifconfig' > - TST_CLEANUP="if_cleanup_restore" > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -47,4 +45,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if4-addr-change.sh b/testcases/network/stress/interface/if4-addr-change.sh > -index b9ece2af9..f162e6a51 100755 > ---- a/testcases/network/stress/interface/if4-addr-change.sh > -+++ b/testcases/network/stress/interface/if4-addr-change.sh > -@@ -9,7 +9,6 @@ TST_CLEANUP="do_cleanup" > - TST_TESTFUNC="test_body" > - TST_NEEDS_CMDS="ifconfig" > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > - # Maximum host portion of the IPv4 address on the local host > - LHOST_IPV4_HOST_MAX="254" > - > -@@ -61,4 +60,7 @@ test_body() > - } > - > - . tst_net.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch b/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > deleted file mode 100644 > index 6cc36cda79..0000000000 > --- a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > +++ /dev/null > @@ -1,121 +0,0 @@ > -From bda92ad659a52d38ac810099f69adff626b064c6 Mon Sep 17 00:00:00 2001 > -From: Joerg Vehlow > -Date: Mon, 27 Jun 2022 10:44:49 +0200 > -Subject: [PATCH] memcg/functional: Fix usage of PAGESIZE from memcg_lib.sh > - > -$PAGESIZES is set in memcg_lib.sh, which was moved to the bottom of the file. > - > -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") > - > -Reviewed-by: Petr Vorel > -Signed-off-by: Joerg Vehlow > -[ upstream status: bda92ad659a52d38ac810099f69adff626b064c6 ] > ---- > - .../controllers/memcg/functional/memcg_failcnt.sh | 7 ++++--- > - .../memcg/functional/memcg_max_usage_in_bytes_test.sh | 10 +++++----- > - .../memcg/functional/memcg_subgroup_charge.sh | 8 ++++---- > - .../memcg/functional/memcg_usage_in_bytes_test.sh | 10 +++++----- > - 4 files changed, 18 insertions(+), 17 deletions(-) > - > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -index 1fed01569..1be98a056 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -@@ -12,9 +12,6 @@ MEMCG_TESTFUNC=test > - MEMCG_SHMMAX=1 > - TST_TEST_DATA="--mmap-anon --mmap-file --shm" > - > --MEMORY_LIMIT=$PAGESIZE > --MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) > -- > - test() > - { > - ROD echo $MEMORY_LIMIT \> memory.limit_in_bytes > -@@ -36,4 +33,8 @@ test() > - } > - > - . memcg_lib.sh > -+ > -+MEMORY_LIMIT=$PAGESIZE > -+MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -index d1ffbe053..302810513 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -@@ -9,11 +9,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=4 > - > -- > --MEM_TO_ALLOC=$((PAGESIZE * 1024)) > --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -- > - # Run test cases which checks memory.[memsw.]max_usage_in_bytes after make > - # some memory allocation > - test_max_usage_in_bytes() > -@@ -88,4 +83,9 @@ test4() > - } > - > - . memcg_lib.sh > -+ > -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) > -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -index 08b6697d4..9bcc01258 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -@@ -12,10 +12,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=3 > - > -- > --# Allocate memory bigger than per-cpu kernel memory > --MEM_TO_ALLOC=$((PAGESIZES * 2)) > -- > - # Test the memory charge won't move to subgroup > - # $1 - memory.limit_in_bytes in sub group > - test_subgroup() > -@@ -67,4 +63,8 @@ test3() > - } > - > - . memcg_lib.sh > -+ > -+# Allocate memory bigger than per-cpu kernel memory > -+MEM_TO_ALLOC=$((PAGESIZES * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -index 6f932124e..125d88e55 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -@@ -9,11 +9,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=2 > - > -- > --MEM_TO_ALLOC=$((PAGESIZE * 1024)) > --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -- > - test1() > - { > - tst_res TINFO "Test memory.usage_in_bytes" > -@@ -35,4 +30,9 @@ test2() > - } > - > - . memcg_lib.sh > -+ > -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) > -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -+ > - tst_run > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/ltp-testsuite.hash b/package/ltp-testsuite/ltp-testsuite.hash > index e13661c08c..8b411a8ffe 100644 > --- a/package/ltp-testsuite/ltp-testsuite.hash > +++ b/package/ltp-testsuite/ltp-testsuite.hash > @@ -1,5 +1,5 @@ > -# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.xz.sha1 > -sha1 9741b6938ca79ad1f4bea32788a483f86d12fd65 ltp-full-20220527.tar.xz > +# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.bz2.sha1 > +sha1 c8d658cd3ab1f5a5c7b5bf56398d3a9525012c6b ltp-full-20220930.tar.xz > # Locally computed > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > -sha256 d635afb5ec7b0de763ab50713baf9fbf65cf089da6e6768f816e4a166cbd17c4 ltp-full-20220527.tar.xz > +sha256 533ab63915b916640667ecce17ee4998006d80d394d4b1f1d105a7aa1df50d38 ltp-full-20220930.tar.xz > diff --git a/package/ltp-testsuite/ltp-testsuite.mk b/package/ltp-testsuite/ltp-testsuite.mk > index 23be3d25c9..34412d562f 100644 > --- a/package/ltp-testsuite/ltp-testsuite.mk > +++ b/package/ltp-testsuite/ltp-testsuite.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LTP_TESTSUITE_VERSION = 20220527 > +LTP_TESTSUITE_VERSION = 20220930 > LTP_TESTSUITE_SOURCE = ltp-full-$(LTP_TESTSUITE_VERSION).tar.xz > LTP_TESTSUITE_SITE = https://github.com/linux-test-project/ltp/releases/download/$(LTP_TESTSUITE_VERSION) > > -- > 2.37.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:13:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:13:57 +0200 Subject: [Buildroot] [git commit] package/fwts: enable for arm Message-ID: <20221001161523.0A1C6863EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6229a31f8d7e5e38a98055f2a99b4f74683b394c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The FWTS application and its associated kernel modules do build on arm; enable it. Signed-off-by: Vincent Stehl?? Cc: Erico Nunes [yann.morin.1998 at free.fr: introduce _ARCH_SUPPORTS, sort alphabetically] Signed-off-by: Yann E. MORIN --- package/fwts/Config.in | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/package/fwts/Config.in b/package/fwts/Config.in index ac9a2e3909..08608d1dd7 100644 --- a/package/fwts/Config.in +++ b/package/fwts/Config.in @@ -1,6 +1,13 @@ +config BR2_PACKAGE_FWTS_ARCH_SUPPORTS + bool + default y if BR2_aarch64 + default y if BR2_arm + default y if BR2_i386 + default y if BR2_x86_64 + config BR2_PACKAGE_FWTS bool "fwts" - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 + depends on BR2_PACKAGE_FWTS_ARCH_SUPPORTS depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd depends on BR2_USE_MMU # libglib2 depends on BR2_USE_WCHAR # libglib2, libbsd @@ -33,7 +40,7 @@ comment "efi_runtime module needs a Linux kernel to be built" endif comment "fwts needs a glibc toolchain w/ wchar, threads, dynamic library" - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 + depends on BR2_PACKAGE_FWTS_ARCH_SUPPORTS depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd depends on BR2_USE_MMU depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ From yann.morin.1998 at free.fr Sat Oct 1 16:16:37 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:16:37 +0200 Subject: [Buildroot] [PATCH] package/fwts: enable for arm In-Reply-To: <20220930141350.15305-1-vincent.stehle@arm.com> References: <20220930141350.15305-1-vincent.stehle@arm.com> Message-ID: <20221001161637.GC30794@scaer> Vincent, All, On 2022-09-30 16:13 +0200, Vincent Stehl? spake thusly: > The FWTS application and its associated kernel modules do build on arm; > enable it. > > Signed-off-by: Vincent Stehl? > Cc: Erico Nunes > --- > package/fwts/Config.in | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/fwts/Config.in b/package/fwts/Config.in > index ac9a2e39098..6be1acac4ed 100644 > --- a/package/fwts/Config.in > +++ b/package/fwts/Config.in > @@ -1,6 +1,6 @@ > config BR2_PACKAGE_FWTS > bool "fwts" > - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 > + depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 || BR2_arm I've introduce BR2_PACKAGE_FWTS_ARCH_SUPPORTS, like we do in other packages when the list of supported architectures grows a bit too much, like here. Applied to master, thanks. Regards, Yann E. MORIN. > depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd > depends on BR2_USE_MMU # libglib2 > depends on BR2_USE_WCHAR # libglib2, libbsd > @@ -33,7 +33,7 @@ comment "efi_runtime module needs a Linux kernel to be built" > endif > > comment "fwts needs a glibc toolchain w/ wchar, threads, dynamic library" > - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 > + depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 || BR2_arm > depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd > depends on BR2_USE_MMU > depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:27:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:27:24 +0200 Subject: [Buildroot] [git commit] package/gitlab-runner: fix forcing openssl Message-ID: <20221001162812.C44078640A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=60f97ad95ad2ec93effed8a41e7d2e6101cd6917 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as it is part of a choice. Instead, we have a symbol explicitly to force libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. Use that. Reported-by: Yann E. MORIN Signed-off-by: Giulio Benetti Signed-off-by: Yann E. MORIN --- package/gitlab-runner/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 72c2742562..89e3e87b5c 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_LIBCURL_CURL # runtime select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. select BR2_PACKAGE_OPENSSL # runtime - select BR2_PACKAGE_LIBOPENSSL # runtime + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime help From yann.morin.1998 at free.fr Sat Oct 1 16:29:29 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:29:29 +0200 Subject: [Buildroot] [PATCH] package/gitlab-runner: fix forcing openssl In-Reply-To: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> References: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> Message-ID: <20221001162929.GD30794@scaer> Giulio, All, On 2022-09-29 13:18 +0200, Giulio Benetti spake thusly: > BR2_PACKAGE_LIBOPENSSL doesn't force selecting libopenssl, to achieve this > we need to use BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. So let's modify > accordingly and improve a bit the comment. I've reworded the commit log, and drop the comment change: the symbol name is explicit enough as to what it does. > Signed-off-by: Giulio Benetti Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/gitlab-runner/Config.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in > index 72c2742562..bfa79ac80e 100644 > --- a/package/gitlab-runner/Config.in > +++ b/package/gitlab-runner/Config.in > @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER > select BR2_PACKAGE_LIBCURL_CURL # runtime > select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. > select BR2_PACKAGE_OPENSSL # runtime > - select BR2_PACKAGE_LIBOPENSSL # runtime > + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime, force using libopenssl > select BR2_PACKAGE_LIBOPENSSL_BIN # runtime > select BR2_PACKAGE_TAR # runtime > help > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:30:12 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:30:12 +0200 Subject: [Buildroot] [PATCH] package/gitlab-runner: fix forcing openssl In-Reply-To: References: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> Message-ID: <20221001163012.GE30794@scaer> Giulio, All, On 2022-09-29 13:20 +0200, Giulio Benetti spake thusly: > Forgotten, > > On 29/09/22 13:18, Giulio Benetti wrote: > >BR2_PACKAGE_LIBOPENSSL doesn't force selecting libopenssl, to achieve this > >we need to use BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. So let's modify > >accordingly and improve a bit the comment. > > > >Signed-off-by: Giulio Benetti > > Suggested-by: Yann E. MORIN Thanks, I added that, but as a Reported-by tag, because that's a bug that I reported. Regards, Yann E. MORIN. > -- > Giulio Benetti > CEO/CTO at Benetti Engineering sas > > >--- > > package/gitlab-runner/Config.in | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > >diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in > >index 72c2742562..bfa79ac80e 100644 > >--- a/package/gitlab-runner/Config.in > >+++ b/package/gitlab-runner/Config.in > >@@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER > > select BR2_PACKAGE_LIBCURL_CURL # runtime > > select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. > > select BR2_PACKAGE_OPENSSL # runtime > >- select BR2_PACKAGE_LIBOPENSSL # runtime > >+ select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime, force using libopenssl > > select BR2_PACKAGE_LIBOPENSSL_BIN # runtime > > select BR2_PACKAGE_TAR # runtime > > help > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:30:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:30:40 +0200 Subject: [Buildroot] [git commit] package/rauc: bump to version 1.8 Message-ID: <20221001163107.896F48643D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e65d768dbc41912451eaebf7f111541a672ba98c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master See the release notes[1] on GitHub for changes. [1] https://github.com/rauc/rauc/releases/tag/v1.8 Signed-off-by: Heiko Thiery Signed-off-by: Yann E. MORIN --- package/rauc/rauc.hash | 5 ++--- package/rauc/rauc.mk | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash index 677d358158..8351d0266e 100644 --- a/package/rauc/rauc.hash +++ b/package/rauc/rauc.hash @@ -1,4 +1,3 @@ -# Locally calculated, after verifying against -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz +# Locally calculated +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk index 8bfb0b79ba..0c81a6cc35 100644 --- a/package/rauc/rauc.mk +++ b/package/rauc/rauc.mk @@ -4,7 +4,7 @@ # ################################################################################ -RAUC_VERSION = 1.7 +RAUC_VERSION = 1.8 RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz RAUC_LICENSE = LGPL-2.1 From yann.morin.1998 at free.fr Sat Oct 1 16:31:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:31:05 +0200 Subject: [Buildroot] [PATCH] package/rauc: bump to version 1.8 In-Reply-To: <20221001065609.28815-1-heiko.thiery@gmail.com> References: <20221001065609.28815-1-heiko.thiery@gmail.com> Message-ID: <20221001163105.GF30794@scaer> Heiko, All, On 2022-10-01 08:56 +0200, Heiko Thiery spake thusly: > See the release notes[1] on GitHub for changes. > > [1] https://github.com/rauc/rauc/releases/tag/v1.8 > > Signed-off-by: Heiko Thiery Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/rauc/rauc.hash | 5 ++--- > package/rauc/rauc.mk | 2 +- > 2 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash > index 677d358158..8351d0266e 100644 > --- a/package/rauc/rauc.hash > +++ b/package/rauc/rauc.hash > @@ -1,4 +1,3 @@ > -# Locally calculated, after verifying against > -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc > -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz > +# Locally calculated > +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING > diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk > index 8bfb0b79ba..0c81a6cc35 100644 > --- a/package/rauc/rauc.mk > +++ b/package/rauc/rauc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RAUC_VERSION = 1.7 > +RAUC_VERSION = 1.8 > RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) > RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz > RAUC_LICENSE = LGPL-2.1 > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:33:01 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:33:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/spirv-llvm-translator: bump to version 11.0.0-297 In-Reply-To: <20220930033722.1898827-1-james.hilliard1@gmail.com> References: <20220930033722.1898827-1-james.hilliard1@gmail.com> Message-ID: <20221001163301.GG30794@scaer> James, All, On 2022-09-29 21:37 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- > package/spirv-llvm-translator/spirv-llvm-translator.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash > index 6133b1326a..edfca1ea02 100644 > --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash > +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash > @@ -1,3 +1,3 @@ > # locally calculated > -sha256 bcb0e5ae2d15f9876551fda46b222f911ed5afd626dfbcc66ddea9d36563ac9c spirv-llvm-translator-v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18.tar.gz > +sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz > sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT > diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk > index 73f7fe02de..159f7d3b52 100644 > --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk > +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk > @@ -6,7 +6,7 @@ > > # Generate version string using: > # git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 > -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18 > +SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 > SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) > SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA > SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:32:29 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:32:29 +0200 Subject: [Buildroot] [git commit] package/spirv-llvm-translator: bump to version 11.0.0-297 Message-ID: <20221001163310.B1E418648E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cc7bbbeac82eac9fdc9a752cd8ca10a263f8349d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- package/spirv-llvm-translator/spirv-llvm-translator.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash index 6133b1326a..edfca1ea02 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 bcb0e5ae2d15f9876551fda46b222f911ed5afd626dfbcc66ddea9d36563ac9c spirv-llvm-translator-v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18.tar.gz +sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk index 73f7fe02de..159f7d3b52 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk @@ -6,7 +6,7 @@ # Generate version string using: # git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18 +SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT From yann.morin.1998 at free.fr Sat Oct 1 16:46:51 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:46:51 +0200 Subject: [Buildroot] [git commit] package/libbpf: bump to version 1.0.1 Message-ID: <20221001164705.58A49864FD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d0c1e5131de893427f9e04147bfcac507a02073d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/libbpf/libbpf.hash | 2 +- package/libbpf/libbpf.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libbpf/libbpf.hash b/package/libbpf/libbpf.hash index 23908ded7c..4305872d9f 100644 --- a/package/libbpf/libbpf.hash +++ b/package/libbpf/libbpf.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f4480242651a93c101ece320030f6b2b9b437f622f807719c13cb32569a6d65a libbpf-0.8.0.tar.gz +sha256 3d6afde67682c909e341bf194678a8969f17628705af25f900d5f68bd299cb03 libbpf-1.0.1.tar.gz sha256 847f4addbd56e2d5be20c4ea0845e972672fc07b755fadaae5f7abd35d71e349 LICENSE sha256 e1638b9a0c68ca90fad3df1d6b4e430804d2fbdc15e58d02cffddfae38953bbf LICENSE.BSD-2-Clause sha256 0b9a4febcdee6de55872501d5c1a8f5d8b0d1650cd4d5351995ceb22e889f8ca LICENSE.LGPL-2.1 diff --git a/package/libbpf/libbpf.mk b/package/libbpf/libbpf.mk index 987d1145f1..820f1dc4bf 100644 --- a/package/libbpf/libbpf.mk +++ b/package/libbpf/libbpf.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBBPF_VERSION = 0.8.0 +LIBBPF_VERSION = 1.0.1 LIBBPF_SITE = $(call github,libbpf,libbpf,v$(LIBBPF_VERSION)) LIBBPF_LICENSE = GPL-2.0, LGPL-2.1, BSD-2-Clause LIBBPF_LICENSE_FILES = LICENSE LICENSE.BSD-2-Clause LICENSE.LGPL-2.1 From yann.morin.1998 at free.fr Sat Oct 1 16:46:53 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:46:53 +0200 Subject: [Buildroot] [git commit] package/bpftool: bump to version 7.0.0 Message-ID: <20221001164705.637A58650D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e7b6d5c66e9ba7dce940b0587e5729fac491504d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which is now upstream. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...-bootstrapping-during-a-cross-compilation.patch | 96 ---------------------- package/bpftool/bpftool.hash | 2 +- package/bpftool/bpftool.mk | 2 +- 3 files changed, 2 insertions(+), 98 deletions(-) diff --git a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch b/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch deleted file mode 100644 index fc192681e3..0000000000 --- a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 189f777ea4829bede0bf92f572c22fe1f2c37522 Mon Sep 17 00:00:00 2001 -From: Shahab Vahedi -Date: Wed, 8 Jun 2022 14:29:28 +0000 -Subject: [PATCH] bpftool: Fix bootstrapping during a cross compilation - -This change adjusts the Makefile to use "HOSTAR" as the archive tool -to keep the sanity of the build process for the bootstrap part in -check. For the rationale, please continue reading. - -When cross compiling bpftool with buildroot, it leads to an invocation -like: - -$ AR="/path/to/buildroot/host/bin/arc-linux-gcc-ar" \ - CC="/path/to/buildroot/host/bin/arc-linux-gcc" \ - ... - make - -Which in return fails while building the bootstrap section: - -----------------------------------8<---------------------------------- - - make: Entering directory '/src/bpftool-v6.7.0/src' - ... libbfd: [ on ] - ... disassembler-four-args: [ on ] - ... zlib: [ on ] - ... libcap: [ OFF ] - ... clang-bpf-co-re: [ on ] <-- triggers bootstrap - - . - . - . - - LINK /src/bpftool-v6.7.0/src/bootstrap/bpftool - /usr/bin/ld: /src/bpftool-v6.7.0/src/bootstrap/libbpf/libbpf.a: - error adding symbols: archive has no index; run ranlib - to add one - collect2: error: ld returned 1 exit status - make: *** [Makefile:211: /src/bpftool-v6.7.0/src/bootstrap/bpftool] - Error 1 - make: *** Waiting for unfinished jobs.... - AR /src/bpftool-v6.7.0/src/libbpf/libbpf.a - make[1]: Leaving directory '/src/bpftool-v6.7.0/libbpf/src' - make: Leaving directory '/src/bpftool-v6.7.0/src' - ----------------------------------->8---------------------------------- - -This occurs because setting "AR" confuses the build process for the -bootstrap section and it calls "arc-linux-gcc-ar" to create and index -"libbpf.a" instead of the host "ar". - -Signed-off-by: Shahab Vahedi -Signed-off-by: Daniel Borkmann -Reviewed-by: Quentin Monnet -Cc: Jean-Philippe Brucker -Link: https://lore.kernel.org/bpf/8d297f0c-cfd0-ef6f-3970-6dddb3d9a87a at synopsys.com -Upstream: https://github.com/libbpf/bpftool/commit/189f777ea4829bede0bf92f572c22fe1f2c37522 - -This is an adapted version, else it won't be possible to cross compile -bpftool if "clang-bpf-co-re" feature is enabled. ---- - src/Makefile | 2 +- - src/Makefile.include | 2 ++ - 2 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/src/Makefile b/src/Makefile -index b657502..b8b0808 100644 ---- a/src/Makefile -+++ b/src/Makefile -@@ -51,7 +51,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_ - $(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT) - $(Q)$(MAKE) -C $(BPF_DIR) OBJDIR=$(patsubst %/,%,$(LIBBPF_BOOTSTRAP_OUTPUT)) \ - PREFIX=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) \ -- ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers -+ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) $@ install_headers - - $(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR) - $(call QUIET_INSTALL, $@) ---- a/src/Makefile.include -+++ b/src/Makefile.include -@@ -12,11 +12,13 @@ - ifneq ($(LLVM),) - $(if $(findstring default,$(origin CC)),$(eval CC := clang$(LLVM_VERSION))) - $(if $(findstring default,$(origin LD)),$(eval LD := ld.lld$(LLVM_VERSION))) -+ HOSTAR ?= llvm-ar - HOSTCC ?= clang - HOSTLD ?= ld.lld - else - $(if $(findstring default,$(origin CC)),$(eval CC = $(CROSS_COMPILE)$(CC))) - $(if $(findstring default,$(origin LD)),$(eval LD = $(CROSS_COMPILE)$(LD))) -+ HOSTAR ?= ar - HOSTCC ?= gcc - HOSTLD ?= ld - endif --- -2.35.3 - diff --git a/package/bpftool/bpftool.hash b/package/bpftool/bpftool.hash index 5fbc25adb7..92b9359fe3 100644 --- a/package/bpftool/bpftool.hash +++ b/package/bpftool/bpftool.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f8f8cabc001823d270898ea3a635d1eb88e067bc24eed06f74e58d2650b32312 bpftool-v6.8.0-br1.tar.gz +sha256 465a50fea4afbacd326f2209d81ae0dcff637fbb2c9d1a315e94f79a788ce960 bpftool-v7.0.0-br1.tar.gz sha256 7c588754d5e81e92e2a12e47cf78949d485c9c22b4850f12d21b3835c85947d1 LICENSE sha256 6313108c23efffa36948f8b2cff1560a5935373b527b0e1a837cc77e6ed1bacd LICENSE.BSD-2-Clause sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL-2.0 diff --git a/package/bpftool/bpftool.mk b/package/bpftool/bpftool.mk index bb1e4ccdff..3b27698130 100644 --- a/package/bpftool/bpftool.mk +++ b/package/bpftool/bpftool.mk @@ -4,7 +4,7 @@ # ################################################################################ -BPFTOOL_VERSION = v6.8.0 +BPFTOOL_VERSION = v7.0.0 BPFTOOL_SITE = https://github.com/libbpf/bpftool BPFTOOL_SITE_METHOD = git BPFTOOL_GIT_SUBMODULES = YES From yann.morin.1998 at free.fr Sat Oct 1 16:47:20 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:47:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/libbpf: bump to version 1.0.1 In-Reply-To: <20220929233443.3353813-1-james.hilliard1@gmail.com> References: <20220929233443.3353813-1-james.hilliard1@gmail.com> Message-ID: <20221001164720.GH30794@scaer> James, All, On 2022-09-29 17:34 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libbpf/libbpf.hash | 2 +- > package/libbpf/libbpf.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/libbpf/libbpf.hash b/package/libbpf/libbpf.hash > index 23908ded7c..4305872d9f 100644 > --- a/package/libbpf/libbpf.hash > +++ b/package/libbpf/libbpf.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f4480242651a93c101ece320030f6b2b9b437f622f807719c13cb32569a6d65a libbpf-0.8.0.tar.gz > +sha256 3d6afde67682c909e341bf194678a8969f17628705af25f900d5f68bd299cb03 libbpf-1.0.1.tar.gz > sha256 847f4addbd56e2d5be20c4ea0845e972672fc07b755fadaae5f7abd35d71e349 LICENSE > sha256 e1638b9a0c68ca90fad3df1d6b4e430804d2fbdc15e58d02cffddfae38953bbf LICENSE.BSD-2-Clause > sha256 0b9a4febcdee6de55872501d5c1a8f5d8b0d1650cd4d5351995ceb22e889f8ca LICENSE.LGPL-2.1 > diff --git a/package/libbpf/libbpf.mk b/package/libbpf/libbpf.mk > index 987d1145f1..820f1dc4bf 100644 > --- a/package/libbpf/libbpf.mk > +++ b/package/libbpf/libbpf.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LIBBPF_VERSION = 0.8.0 > +LIBBPF_VERSION = 1.0.1 > LIBBPF_SITE = $(call github,libbpf,libbpf,v$(LIBBPF_VERSION)) > LIBBPF_LICENSE = GPL-2.0, LGPL-2.1, BSD-2-Clause > LIBBPF_LICENSE_FILES = LICENSE LICENSE.BSD-2-Clause LICENSE.LGPL-2.1 > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:47:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:47:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/bpftool: bump to version 7.0.0 In-Reply-To: <20220929234406.374167-1-james.hilliard1@gmail.com> References: <20220929234406.374167-1-james.hilliard1@gmail.com> Message-ID: <20221001164732.GI30794@scaer> James, All, On 2022-09-29 17:44 -0600, James Hilliard spake thusly: > Drop patch which is now upstream. > > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...strapping-during-a-cross-compilation.patch | 96 ------------------- > package/bpftool/bpftool.hash | 2 +- > package/bpftool/bpftool.mk | 2 +- > 3 files changed, 2 insertions(+), 98 deletions(-) > delete mode 100644 package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > > diff --git a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch b/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > deleted file mode 100644 > index fc192681e3..0000000000 > --- a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > +++ /dev/null > @@ -1,96 +0,0 @@ > -From 189f777ea4829bede0bf92f572c22fe1f2c37522 Mon Sep 17 00:00:00 2001 > -From: Shahab Vahedi > -Date: Wed, 8 Jun 2022 14:29:28 +0000 > -Subject: [PATCH] bpftool: Fix bootstrapping during a cross compilation > - > -This change adjusts the Makefile to use "HOSTAR" as the archive tool > -to keep the sanity of the build process for the bootstrap part in > -check. For the rationale, please continue reading. > - > -When cross compiling bpftool with buildroot, it leads to an invocation > -like: > - > -$ AR="/path/to/buildroot/host/bin/arc-linux-gcc-ar" \ > - CC="/path/to/buildroot/host/bin/arc-linux-gcc" \ > - ... > - make > - > -Which in return fails while building the bootstrap section: > - > -----------------------------------8<---------------------------------- > - > - make: Entering directory '/src/bpftool-v6.7.0/src' > - ... libbfd: [ on ] > - ... disassembler-four-args: [ on ] > - ... zlib: [ on ] > - ... libcap: [ OFF ] > - ... clang-bpf-co-re: [ on ] <-- triggers bootstrap > - > - . > - . > - . > - > - LINK /src/bpftool-v6.7.0/src/bootstrap/bpftool > - /usr/bin/ld: /src/bpftool-v6.7.0/src/bootstrap/libbpf/libbpf.a: > - error adding symbols: archive has no index; run ranlib > - to add one > - collect2: error: ld returned 1 exit status > - make: *** [Makefile:211: /src/bpftool-v6.7.0/src/bootstrap/bpftool] > - Error 1 > - make: *** Waiting for unfinished jobs.... > - AR /src/bpftool-v6.7.0/src/libbpf/libbpf.a > - make[1]: Leaving directory '/src/bpftool-v6.7.0/libbpf/src' > - make: Leaving directory '/src/bpftool-v6.7.0/src' > - > ----------------------------------->8---------------------------------- > - > -This occurs because setting "AR" confuses the build process for the > -bootstrap section and it calls "arc-linux-gcc-ar" to create and index > -"libbpf.a" instead of the host "ar". > - > -Signed-off-by: Shahab Vahedi > -Signed-off-by: Daniel Borkmann > -Reviewed-by: Quentin Monnet > -Cc: Jean-Philippe Brucker > -Link: https://lore.kernel.org/bpf/8d297f0c-cfd0-ef6f-3970-6dddb3d9a87a at synopsys.com > -Upstream: https://github.com/libbpf/bpftool/commit/189f777ea4829bede0bf92f572c22fe1f2c37522 > - > -This is an adapted version, else it won't be possible to cross compile > -bpftool if "clang-bpf-co-re" feature is enabled. > ---- > - src/Makefile | 2 +- > - src/Makefile.include | 2 ++ > - 2 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/src/Makefile b/src/Makefile > -index b657502..b8b0808 100644 > ---- a/src/Makefile > -+++ b/src/Makefile > -@@ -51,7 +51,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_ > - $(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT) > - $(Q)$(MAKE) -C $(BPF_DIR) OBJDIR=$(patsubst %/,%,$(LIBBPF_BOOTSTRAP_OUTPUT)) \ > - PREFIX=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) \ > -- ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers > -+ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) $@ install_headers > - > - $(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR) > - $(call QUIET_INSTALL, $@) > ---- a/src/Makefile.include > -+++ b/src/Makefile.include > -@@ -12,11 +12,13 @@ > - ifneq ($(LLVM),) > - $(if $(findstring default,$(origin CC)),$(eval CC := clang$(LLVM_VERSION))) > - $(if $(findstring default,$(origin LD)),$(eval LD := ld.lld$(LLVM_VERSION))) > -+ HOSTAR ?= llvm-ar > - HOSTCC ?= clang > - HOSTLD ?= ld.lld > - else > - $(if $(findstring default,$(origin CC)),$(eval CC = $(CROSS_COMPILE)$(CC))) > - $(if $(findstring default,$(origin LD)),$(eval LD = $(CROSS_COMPILE)$(LD))) > -+ HOSTAR ?= ar > - HOSTCC ?= gcc > - HOSTLD ?= ld > - endif > --- > -2.35.3 > - > diff --git a/package/bpftool/bpftool.hash b/package/bpftool/bpftool.hash > index 5fbc25adb7..92b9359fe3 100644 > --- a/package/bpftool/bpftool.hash > +++ b/package/bpftool/bpftool.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f8f8cabc001823d270898ea3a635d1eb88e067bc24eed06f74e58d2650b32312 bpftool-v6.8.0-br1.tar.gz > +sha256 465a50fea4afbacd326f2209d81ae0dcff637fbb2c9d1a315e94f79a788ce960 bpftool-v7.0.0-br1.tar.gz > sha256 7c588754d5e81e92e2a12e47cf78949d485c9c22b4850f12d21b3835c85947d1 LICENSE > sha256 6313108c23efffa36948f8b2cff1560a5935373b527b0e1a837cc77e6ed1bacd LICENSE.BSD-2-Clause > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL-2.0 > diff --git a/package/bpftool/bpftool.mk b/package/bpftool/bpftool.mk > index bb1e4ccdff..3b27698130 100644 > --- a/package/bpftool/bpftool.mk > +++ b/package/bpftool/bpftool.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BPFTOOL_VERSION = v6.8.0 > +BPFTOOL_VERSION = v7.0.0 > BPFTOOL_SITE = https://github.com/libbpf/bpftool > BPFTOOL_SITE_METHOD = git > BPFTOOL_GIT_SUBMODULES = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:48:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:48:13 +0200 Subject: [Buildroot] [git commit] package/mpd: update to version 0.23.9 Message-ID: <20221001164834.BD9CA8662C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8898523d4a88ba06d89c146d5336a785086a75b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Mostly internal refactoring and some minor enhancements /fixes in features cdio_paranoia, ffmpeg (support version 5.1), pipewire, replay gain. Improve iconv detection. Fix bogus volume levels with multiple partitions. For partition support, version 0.23.9 or later is recommended. Full change log: https://raw.githubusercontent.com/MusicPlayerDaemon/MPD/v0.23.9/NEWS Tested on: i386 (build, run) x86_64 (build) aarch64 (build, run) Signed-off-by: Andreas Ziegler Signed-off-by: Yann E. MORIN --- package/mpd/mpd.hash | 2 +- package/mpd/mpd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mpd/mpd.hash b/package/mpd/mpd.hash index e5f587fefc..fca0ee8539 100644 --- a/package/mpd/mpd.hash +++ b/package/mpd/mpd.hash @@ -1,3 +1,3 @@ # Locally calculated after checking pgp signature -sha256 86bb569bf3b519821f36f6bb5564e484e85d2564411b34b200fe2cd3a04e78cf mpd-0.23.8.tar.xz +sha256 2becaba980402e8dc7972ccc3476e493b7ae2eeb720d31fa6712472ed48e9f2d mpd-0.23.9.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk index c21426b873..5c15953984 100644 --- a/package/mpd/mpd.mk +++ b/package/mpd/mpd.mk @@ -5,7 +5,7 @@ ################################################################################ MPD_VERSION_MAJOR = 0.23 -MPD_VERSION = $(MPD_VERSION_MAJOR).8 +MPD_VERSION = $(MPD_VERSION_MAJOR).9 MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz MPD_SITE = https://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR) MPD_DEPENDENCIES = host-pkgconf boost fmt From yann.morin.1998 at free.fr Sat Oct 1 16:48:49 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:48:49 +0200 Subject: [Buildroot] [PATCH] package/mpd: update to version 0.23.9 In-Reply-To: <20220929105215.2984-1-br015@umbiko.net> References: <20220929105215.2984-1-br015@umbiko.net> Message-ID: <20221001164849.GJ30794@scaer> Andreas, All, On 2022-09-29 12:52 +0200, Andreas Ziegler spake thusly: > Mostly internal refactoring and some minor enhancements /fixes in features > cdio_paranoia, ffmpeg (support version 5.1), pipewire, replay gain. > > Improve iconv detection. > > Fix bogus volume levels with multiple partitions. > For partition support, version 0.23.9 or later is recommended. > > Full change log: > https://raw.githubusercontent.com/MusicPlayerDaemon/MPD/v0.23.9/NEWS > > Tested on: > i386 (build, run) > x86_64 (build) > aarch64 (build, run) > > Signed-off-by: Andreas Ziegler Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mpd/mpd.hash | 2 +- > package/mpd/mpd.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/mpd/mpd.hash b/package/mpd/mpd.hash > index e5f587fefc..fca0ee8539 100644 > --- a/package/mpd/mpd.hash > +++ b/package/mpd/mpd.hash > @@ -1,3 +1,3 @@ > # Locally calculated after checking pgp signature > -sha256 86bb569bf3b519821f36f6bb5564e484e85d2564411b34b200fe2cd3a04e78cf mpd-0.23.8.tar.xz > +sha256 2becaba980402e8dc7972ccc3476e493b7ae2eeb720d31fa6712472ed48e9f2d mpd-0.23.9.tar.xz > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING > diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk > index c21426b873..5c15953984 100644 > --- a/package/mpd/mpd.mk > +++ b/package/mpd/mpd.mk > @@ -5,7 +5,7 @@ > ################################################################################ > > MPD_VERSION_MAJOR = 0.23 > -MPD_VERSION = $(MPD_VERSION_MAJOR).8 > +MPD_VERSION = $(MPD_VERSION_MAJOR).9 > MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz > MPD_SITE = https://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR) > MPD_DEPENDENCIES = host-pkgconf boost fmt > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:50:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:24 +0200 Subject: [Buildroot] [git commit] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221001165048.E4E65866E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2e4c0e722f4d9494c2451458a42d4c4f8ef006ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Sat Oct 1 16:50:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:28 +0200 Subject: [Buildroot] [git commit] package/ser2net: bump to version 4.3.8 Message-ID: <20221001165049.07A1B866FB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db3a039e27f65f6cb5a24019741c21e6f741b6dd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/ser2net/ser2net.hash | 6 +++--- package/ser2net/ser2net.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/ser2net/ser2net.hash b/package/ser2net/ser2net.hash index db493b28cb..50a2efdee8 100644 --- a/package/ser2net/ser2net.hash +++ b/package/ser2net/ser2net.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/ser2net/files/ser2net/ -md5 3323783668b20016d79458e82327cff8 ser2net-4.3.7.tar.gz -sha1 88c0542b3b5e8ce03bc99ace00b2e163382e726e ser2net-4.3.7.tar.gz +md5 73b4ccc7e9d89034f1a1a20a780b9da9 ser2net-4.3.8.tar.gz +sha1 d1597d88d154489cb08bac69bb1772712d30cbcd ser2net-4.3.8.tar.gz # Locally computed: -sha256 542915e240ae8b5c7dcec8d1589e6067818532900d45cfef226cea9f0e671d13 ser2net-4.3.7.tar.gz +sha256 e5620975523059a38709bb53c0567600adbbcb8011066a2d2fe1b4db9efe0ba3 ser2net-4.3.8.tar.gz sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING diff --git a/package/ser2net/ser2net.mk b/package/ser2net/ser2net.mk index 393d358033..679aaec29a 100644 --- a/package/ser2net/ser2net.mk +++ b/package/ser2net/ser2net.mk @@ -4,7 +4,7 @@ # ################################################################################ -SER2NET_VERSION = 4.3.7 +SER2NET_VERSION = 4.3.8 SER2NET_SITE = https://downloads.sourceforge.net/project/ser2net/ser2net SER2NET_LICENSE = GPL-2.0+ SER2NET_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sat Oct 1 16:50:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:26 +0200 Subject: [Buildroot] [git commit] package/gensio: bump to version 2.5.5 Message-ID: <20221001165048.F0DF3866EB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f67d23af11510b447d9d0e1a71249f97e655305 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- .../0001-tools-gensiot-Fix-build-with-musl.patch | 29 ---------------------- package/gensio/gensio.hash | 6 ++--- package/gensio/gensio.mk | 2 +- 3 files changed, 4 insertions(+), 33 deletions(-) diff --git a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch b/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch deleted file mode 100644 index 7cda950c9e..0000000000 --- a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 64f8f754447572a6b7bed4038a9a29a12b448479 Mon Sep 17 00:00:00 2001 -From: Jan Luebbe -Date: Thu, 25 Aug 2022 12:19:16 +0200 -Subject: [PATCH] tools:gensiot: Fix build with musl - -According to POSIX getpid() is available in unistd.h, not sys/unistd.h. - -Signed-off-by: Jan Luebbe - -[Retrieved from: -https://github.com/cminyard/gensio/commit/64f8f754447572a6b7bed4038a9a29a12b448479] -Signed-off-by: Fabrice Fontaine ---- - tools/gensiotool.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/tools/gensiotool.c b/tools/gensiotool.c -index cac531bb..ab0bb958 100644 ---- a/tools/gensiotool.c -+++ b/tools/gensiotool.c -@@ -44,7 +44,7 @@ - #include - #include - #include --#include -+#include - #include - #endif - diff --git a/package/gensio/gensio.hash b/package/gensio/gensio.hash index a0db4bc516..84af3fdab1 100644 --- a/package/gensio/gensio.hash +++ b/package/gensio/gensio.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/ser2net/files/ser2net/ -md5 60f90f62180922e2c7550877c4bb950c gensio-2.5.2.tar.gz -sha1 b6c2ec39b51a56f5d28e88a59122f4c65ff844fa gensio-2.5.2.tar.gz +md5 c8d65e1809ed5cd1138fa309e3ab0e94 gensio-2.5.5.tar.gz +sha1 076fc8324dedb658972a88c738131a409968e2ba gensio-2.5.5.tar.gz # Locally computed: -sha256 f7bc3d2ba9da73489dd3227a21ddd2f44a18c443185ce2b1a08ec564da06e6d1 gensio-2.5.2.tar.gz +sha256 63c5fff536efd080fb7bc7fa084331c19fc64abd42b7f2bec86bd77b4fd10840 gensio-2.5.5.tar.gz sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING sha256 dcac7d447dd81ab96d28dce00a07a6486e623f7ded94e2a2a8e83312405cdf89 COPYING.LIB diff --git a/package/gensio/gensio.mk b/package/gensio/gensio.mk index f1cc00bf32..5538f97b19 100644 --- a/package/gensio/gensio.mk +++ b/package/gensio/gensio.mk @@ -4,7 +4,7 @@ # ################################################################################ -GENSIO_VERSION = 2.5.2 +GENSIO_VERSION = 2.5.5 GENSIO_SITE = http://downloads.sourceforge.net/project/ser2net/ser2net GENSIO_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (tools) GENSIO_LICENSE_FILES = COPYING.LIB COPYING From yann.morin.1998 at free.fr Sat Oct 1 16:50:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/ser2net: bump to version 4.3.8 In-Reply-To: <20220929083341.2485242-1-james.hilliard1@gmail.com> References: <20220929083341.2485242-1-james.hilliard1@gmail.com> Message-ID: <20221001165055.GK30794@scaer> James, All, On 2022-09-29 02:33 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/ser2net/ser2net.hash | 6 +++--- > package/ser2net/ser2net.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/ser2net/ser2net.hash b/package/ser2net/ser2net.hash > index db493b28cb..50a2efdee8 100644 > --- a/package/ser2net/ser2net.hash > +++ b/package/ser2net/ser2net.hash > @@ -1,6 +1,6 @@ > # From https://sourceforge.net/projects/ser2net/files/ser2net/ > -md5 3323783668b20016d79458e82327cff8 ser2net-4.3.7.tar.gz > -sha1 88c0542b3b5e8ce03bc99ace00b2e163382e726e ser2net-4.3.7.tar.gz > +md5 73b4ccc7e9d89034f1a1a20a780b9da9 ser2net-4.3.8.tar.gz > +sha1 d1597d88d154489cb08bac69bb1772712d30cbcd ser2net-4.3.8.tar.gz > # Locally computed: > -sha256 542915e240ae8b5c7dcec8d1589e6067818532900d45cfef226cea9f0e671d13 ser2net-4.3.7.tar.gz > +sha256 e5620975523059a38709bb53c0567600adbbcb8011066a2d2fe1b4db9efe0ba3 ser2net-4.3.8.tar.gz > sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING > diff --git a/package/ser2net/ser2net.mk b/package/ser2net/ser2net.mk > index 393d358033..679aaec29a 100644 > --- a/package/ser2net/ser2net.mk > +++ b/package/ser2net/ser2net.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SER2NET_VERSION = 4.3.7 > +SER2NET_VERSION = 4.3.8 > SER2NET_SITE = https://downloads.sourceforge.net/project/ser2net/ser2net > SER2NET_LICENSE = GPL-2.0+ > SER2NET_LICENSE_FILES = COPYING > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:51:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:51:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/gensio: bump to version 2.5.5 In-Reply-To: <20220929083004.2387969-1-james.hilliard1@gmail.com> References: <20220929083004.2387969-1-james.hilliard1@gmail.com> Message-ID: <20221001165107.GL30794@scaer> James, All, On 2022-09-29 02:30 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...01-tools-gensiot-Fix-build-with-musl.patch | 29 ------------------- > package/gensio/gensio.hash | 6 ++-- > package/gensio/gensio.mk | 2 +- > 3 files changed, 4 insertions(+), 33 deletions(-) > delete mode 100644 package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > > diff --git a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch b/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > deleted file mode 100644 > index 7cda950c9e..0000000000 > --- a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > +++ /dev/null > @@ -1,29 +0,0 @@ > -From 64f8f754447572a6b7bed4038a9a29a12b448479 Mon Sep 17 00:00:00 2001 > -From: Jan Luebbe > -Date: Thu, 25 Aug 2022 12:19:16 +0200 > -Subject: [PATCH] tools:gensiot: Fix build with musl > - > -According to POSIX getpid() is available in unistd.h, not sys/unistd.h. > - > -Signed-off-by: Jan Luebbe > - > -[Retrieved from: > -https://github.com/cminyard/gensio/commit/64f8f754447572a6b7bed4038a9a29a12b448479] > -Signed-off-by: Fabrice Fontaine > ---- > - tools/gensiotool.c | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/tools/gensiotool.c b/tools/gensiotool.c > -index cac531bb..ab0bb958 100644 > ---- a/tools/gensiotool.c > -+++ b/tools/gensiotool.c > -@@ -44,7 +44,7 @@ > - #include > - #include > - #include > --#include > -+#include > - #include > - #endif > - > diff --git a/package/gensio/gensio.hash b/package/gensio/gensio.hash > index a0db4bc516..84af3fdab1 100644 > --- a/package/gensio/gensio.hash > +++ b/package/gensio/gensio.hash > @@ -1,7 +1,7 @@ > # From https://sourceforge.net/projects/ser2net/files/ser2net/ > -md5 60f90f62180922e2c7550877c4bb950c gensio-2.5.2.tar.gz > -sha1 b6c2ec39b51a56f5d28e88a59122f4c65ff844fa gensio-2.5.2.tar.gz > +md5 c8d65e1809ed5cd1138fa309e3ab0e94 gensio-2.5.5.tar.gz > +sha1 076fc8324dedb658972a88c738131a409968e2ba gensio-2.5.5.tar.gz > # Locally computed: > -sha256 f7bc3d2ba9da73489dd3227a21ddd2f44a18c443185ce2b1a08ec564da06e6d1 gensio-2.5.2.tar.gz > +sha256 63c5fff536efd080fb7bc7fa084331c19fc64abd42b7f2bec86bd77b4fd10840 gensio-2.5.5.tar.gz > sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING > sha256 dcac7d447dd81ab96d28dce00a07a6486e623f7ded94e2a2a8e83312405cdf89 COPYING.LIB > diff --git a/package/gensio/gensio.mk b/package/gensio/gensio.mk > index f1cc00bf32..5538f97b19 100644 > --- a/package/gensio/gensio.mk > +++ b/package/gensio/gensio.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -GENSIO_VERSION = 2.5.2 > +GENSIO_VERSION = 2.5.5 > GENSIO_SITE = http://downloads.sourceforge.net/project/ser2net/ser2net > GENSIO_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (tools) > GENSIO_LICENSE_FILES = COPYING.LIB COPYING > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:52:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:52:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20220928213631.14450-1-fontaine.fabrice@gmail.com> References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> Message-ID: <20221001165241.GM30794@scaer> Fabrice, All, On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > Denial of service attack and buffer overflow against TLS 1.3 > servers using session ticket resumption. When built with > --enable-session-ticket and making use of TLS 1.3 server code in > wolfSSL, there is the possibility of a malicious client to craft a > malformed second ClientHello packet that causes the server to crash. > This issue is limited to when using both --enable-session-ticket and TLS > 1.3 on the server side. Users with TLS 1.3 servers, and having > --enable-session-ticket, should update to the latest version of wolfSSL. I see that we are not explicitly using either --enable or --disable-session-ticket, so what is the default, and were we impacted? Also, we should have an explicit setting for that, rather than leave it to chance. > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/wolfssl/wolfssl.hash | 2 +- > package/wolfssl/wolfssl.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash > index f1401e4cda..3849ffb9fc 100644 > --- a/package/wolfssl/wolfssl.hash > +++ b/package/wolfssl/wolfssl.hash > @@ -1,5 +1,5 @@ > # Locally computed: > -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz > +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz > > # Hash for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk > index ca360312c9..95d4f47952 100644 > --- a/package/wolfssl/wolfssl.mk > +++ b/package/wolfssl/wolfssl.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -WOLFSSL_VERSION = 5.5.0 > +WOLFSSL_VERSION = 5.5.1 > WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) > WOLFSSL_INSTALL_STAGING = YES > > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From romain.naour at gmail.com Sat Oct 1 17:13:01 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:13:01 +0200 Subject: [Buildroot] [PATCH v5 1/3] boot/ti-k3-r5-loader: add new package In-Reply-To: <20220923205543.1518798-2-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-2-gadiyar@ti.com> Message-ID: Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar via buildroot a ?crit?: > From: Xuanhao Shi > > This is a separate U-Boot package that would build > the intermediate spl binary for the R5 core on TI's k3 boards. > Usually, the resulting spl will be used for k3-image-gen > to build the full R5 boot binary tiboot3.bin. > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 6 +++ > boot/Config.in | 1 + > boot/ti-k3-r5-loader/Config.in | 13 +++++++ > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 + > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 45 +++++++++++++++++++++++ > 5 files changed, 67 insertions(+) > create mode 100644 boot/ti-k3-r5-loader/Config.in > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 3de63ea72f..5f36cbf535 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -128,6 +128,9 @@ F: package/dcron/ > F: package/libxmlrpc/ > F: package/python-docopt/ > > +N: Anand Gadiyar > +F: boot/ti-k3-r5-loader/ > + > N: Andr? Zwing > F: package/libkrb5/ > F: package/openal/ > @@ -3063,6 +3066,9 @@ F: package/python-pyusb/ > N: Wojciech Nizi?ski > F: package/fwup/ > > +N: Xuanhao Shi > +F: boot/ti-k3-r5-loader/ > + > N: Yair Ben Avraham > F: package/casync/ > F: package/gloox/ > diff --git a/boot/Config.in b/boot/Config.in > index 40472ae07d..ce17b2df6b 100644 > --- a/boot/Config.in > +++ b/boot/Config.in > @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" > source "boot/shim/Config.in" > source "boot/sun20i-d1-spl/Config.in" > source "boot/syslinux/Config.in" > +source "boot/ti-k3-r5-loader/Config.in" > source "boot/uboot/Config.in" > source "boot/vexpress-firmware/Config.in" > > diff --git a/boot/ti-k3-r5-loader/Config.in b/boot/ti-k3-r5-loader/Config.in > new file mode 100644 > index 0000000000..7f5fa0b4c8 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/Config.in > @@ -0,0 +1,13 @@ > +config BR2_TARGET_TI_K3_R5_LOADER > + bool "ti-k3-r5-loader" > + help > + Separate U-Boot build for R5 cores on TI's k3 boards. > + Usually used to build tiboot3.bin with k3-image-gen. Usually we add a "if BR2_TARGET_TI_K3_R5_LOADER" instead of "depends on BR2_TARGET_TI_K3_R5_LOADER" for each sub-options. > + > +config BR2_TARGET_TI_K3_R5_LOADER_BOARD > + string "Board to configure for" > + depends on BR2_TARGET_TI_K3_R5_LOADER > + help > + Specify the board to configure the bootloader for. > + This should be the name of a board under board/ti > + For example, "am64x_evm". > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > new file mode 100644 > index 0000000000..fb6ce7c2a6 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > @@ -0,0 +1,2 @@ > +# Locally computed: > +sha256 6d69d5e4635cb3fa7852bf15f88ca342ef7740196e71961d3572deb58ba44bea u-boot-2022.10-rc1.tar.bz2 > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > new file mode 100644 > index 0000000000..1e09fad9f5 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > @@ -0,0 +1,45 @@ > +################################################################################ > +# > +# ti-k3-r5-loader.mk > +# > +################################################################################ > + > +TI_K3_R5_LOADER_VERSION = 2022.10-rc1 We prefer using a release version not an -rc pre-release. Is 2022.07 is good enough? > +TI_K3_R5_LOADER_SITE = https://ftp.denx.de/pub/u-boot > +TI_K3_R5_LOADER_SOURCE = u-boot-$(TI_K3_R5_LOADER_VERSION).tar.bz2 > +TI_K3_R5_LOADER_LICENSE = GPL-2.0+ > +TI_K3_R5_LOADER_LICENSE_FILES = Licenses/gpl-2.0.txt > +TI_K3_R5_LOADER_CPE_ID_VENDOR = denx > +TI_K3_R5_LOADER_CPE_ID_PRODUCT = u-boot > +TI_K3_R5_LOADER_INSTALL_IMAGES = YES > +TI_K3_R5_LOADER_DEPENDENCIES = \ > + host-pkgconf \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + host-arm-gnu-toolchain \ > + host-openssl > + > +TI_K3_R5_LOADER_MAKE = $(BR2_MAKE) > +TI_K3_R5_LOADER_MAKE_ENV = $(TARGET_MAKE_ENV) > +TI_K3_R5_LOADER_KCONFIG_DEPENDENCIES = \ > + host-arm-gnu-toolchain \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + $(BR2_BISON_HOST_DEPENDENCY) \ > + $(BR2_FLEX_HOST_DEPENDENCY) > + > +TI_K3_R5_LOADER_BOARD = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD)) We have to check if BR2_TARGET_TI_K3_R5_LOADER_BOARD is not empty. > +TI_K3_R5_LOADER_KCONFIG_DEFCONFIG = $(TI_K3_R5_LOADER_BOARD)_r5_defconfig I think we should handle the ti-k3-r5-loader defconfig as for other packages using a defconfig. We should use a Kconfig option to provide the ti-k3-r5-loader (uboot) defconfig name from Buildroot defconfig and not hardcoding a suffix _r5_ from the package makefile (.mk). > +TI_K3_R5_LOADER_MAKE_OPTS += \ > + CROSS_COMPILE=$(HOST_ARM_GNU_TOOLCHAIN_INSTALL_DIR)/bin/arm-none-eabi- \ Use the $(HOST_DIR) instead. > + ARCH=arm \ > + HOSTCC="$(HOSTCC) $(subst -I/,-isystem /,$(subst -I /,-isystem /,$(HOST_CFLAGS)))" \ > + HOSTLDFLAGS="$(HOST_LDFLAGS)" > + > +define TI_K3_R5_LOADER_BUILD_CMDS > + $(TARGET_CONFIGURE_OPTS) $(TI_K3_R5_LOADER_MAKE) -C $(@D) $(TI_K3_R5_LOADER_MAKE_OPTS) > +endef > + > +define TI_K3_R5_LOADER_INSTALL_IMAGES_CMDS > + cp $(@D)/spl/u-boot-spl.bin $(BINARIES_DIR)/r5-u-boot-spl.bin > +endef Best regards, Romain > + > +$(eval $(kconfig-package)) From romain.naour at gmail.com Sat Oct 1 17:34:43 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:34:43 +0200 Subject: [Buildroot] [PATCH v5 2/3] boot/ti-k3-image-gen: add new package In-Reply-To: <20220923205543.1518798-3-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-3-gadiyar@ti.com> Message-ID: Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar a ?crit?: > From: Xuanhao Shi > > This is the image generator that builds the full boot binary, > tiboot3.bin, for the R5 core on TI's k3 devices. > This requires the R5 spl output from the ti-k3-r5-loader package. > > https://git.ti.com/cgit/k3-image-gen/k3-image-gen > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 2 ++ > boot/Config.in | 1 + > boot/ti-k3-image-gen/Config.in | 24 +++++++++++++++++ > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 2 ++ > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 33 +++++++++++++++++++++++ > 5 files changed, 62 insertions(+) > create mode 100644 boot/ti-k3-image-gen/Config.in > create mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > create mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 5f36cbf535..81f095f799 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -129,6 +129,7 @@ F: package/libxmlrpc/ > F: package/python-docopt/ > > N: Anand Gadiyar > +F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > > N: Andr? Zwing > @@ -3067,6 +3068,7 @@ N: Wojciech Nizi?ski > F: package/fwup/ > > N: Xuanhao Shi > +F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ Actually this email is bouncing. please remove it. > > N: Yair Ben Avraham > diff --git a/boot/Config.in b/boot/Config.in > index ce17b2df6b..1b25bacfee 100644 > --- a/boot/Config.in > +++ b/boot/Config.in > @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" > source "boot/shim/Config.in" > source "boot/sun20i-d1-spl/Config.in" > source "boot/syslinux/Config.in" > +source "boot/ti-k3-image-gen/Config.in" > source "boot/ti-k3-r5-loader/Config.in" > source "boot/uboot/Config.in" > source "boot/vexpress-firmware/Config.in" > diff --git a/boot/ti-k3-image-gen/Config.in b/boot/ti-k3-image-gen/Config.in > new file mode 100644 > index 0000000000..00416dcefc > --- /dev/null > +++ b/boot/ti-k3-image-gen/Config.in > @@ -0,0 +1,24 @@ > +config BR2_TARGET_TI_K3_IMAGE_GEN > + bool "ti-k3-image-gen" > + select BR2_TARGET_TI_K3_R5_LOADER > + help > + Use TI's k3-image-gen to build a separate bare metal > + boot binary from a separate spl. Currently supports > + version 08.04.00.005 as default. > + > + https://git.ti.com/cgit/k3-image-gen/k3-image-gen/ Same comment as for the patch 1/3, use "if BR2_TARGET_TI_K3_IMAGE_GEN" here. > + > +config BR2_TARGET_TI_K3_IMAGE_GEN_SOC > + string "SOC type for image gen" > + depends on BR2_TARGET_TI_K3_IMAGE_GEN > + help > + The target SoC option for image gen. > + For example, "am64x" for AM64X boards. > + > +config BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG > + string "CONFIG type for image gen" > + depends on BR2_TARGET_TI_K3_IMAGE_GEN > + help > + The board config option for image gen. > + Usually "sk" or "evm". > + > diff --git a/boot/ti-k3-image-gen/ti-k3-image-gen.hash b/boot/ti-k3-image-gen/ti-k3-image-gen.hash > new file mode 100644 > index 0000000000..e307a02a67 > --- /dev/null > +++ b/boot/ti-k3-image-gen/ti-k3-image-gen.hash > @@ -0,0 +1,2 @@ > +# Locally calculated > +sha256 e585dc868ada21ef3389159541d669b88bc406b453470e92da85d9222d271c96 k3-image-gen-08.04.00.005.tar.gz Since it's a tool released by TI, it would be great if the hash can be provided in the release note. > diff --git a/boot/ti-k3-image-gen/ti-k3-image-gen.mk b/boot/ti-k3-image-gen/ti-k3-image-gen.mk > new file mode 100644 > index 0000000000..1f97490392 > --- /dev/null > +++ b/boot/ti-k3-image-gen/ti-k3-image-gen.mk > @@ -0,0 +1,33 @@ > +################################################################################ > +# > +# ti-k3-image-gen > +# > +################################################################################ > + > +TI_K3_IMAGE_GEN_VERSION = 08.04.00.005 > +TI_K3_IMAGE_GEN_SITE = https://git.ti.com/cgit/k3-image-gen/k3-image-gen/snapshot > +TI_K3_IMAGE_GEN_SOURCE = k3-image-gen-$(TI_K3_IMAGE_GEN_VERSION).tar.gz > +TI_K3_IMAGE_GEN_LICENSE = BSD-3-Clause > +TI_K3_IMAGE_GEN_LICENSE_FILES = system-firmware-image-gen-1.0-manifest.html It seems the BSD-3-Clause is not the only license of this tool. The manifest file is also about GPL-2.0, TI Text File License, TI Commercial License. Can you clarify the licensing info ? Also the manifest file hash should be listed in ti-k3-image-gen.hash (Actually having an html file as license file may not really practical in the end, can you provide a LICENSE or COPYING file ?) > +TI_K3_IMAGE_GEN_INSTALL_IMAGES = YES > +TI_K3_IMAGE_GEN_DEPENDENCIES = host-arm-gnu-toolchain ti-k3-r5-loader The build dependency on ti-k3-r5-loader may not be obvious, maybe add a comment to say that ti-k3-image needs r5-u-boot-spl.bin to build. > +TI_K3_IMAGE_GEN_MAKE = $(BR2_MAKE) Why do you really need this? This is only required when the build system requires make 4.0+. If yes, add a small comment. > +TI_K3_IMAGE_GEN_SOC = $(call qstrip,$(BR2_TARGET_TI_K3_IMAGE_GEN_SOC)) > +TI_K3_IMAGE_GEN_CONFIG = $(call qstrip,$(BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG)) > +TI_K3_IMAGE_GEN_MAKE_OPTS = \ > + SOC=$(TI_K3_IMAGE_GEN_SOC) \ > + CONFIG=$(TI_K3_IMAGE_GEN_CONFIG) \ > + CROSS_COMPILE=$(HOST_ARM_GNU_TOOLCHAIN_INSTALL_DIR)/bin/arm-none-eabi- \ Use $(HOST_DIR) here > + SBL=$(BINARIES_DIR)/r5-u-boot-spl.bin \ > + O=$(BINARIES_DIR) \ > + BIN_DIR=$(BINARIES_DIR) > + > +define TI_K3_IMAGE_GEN_BUILD_CMDS > + $(TI_K3_IMAGE_GEN_MAKE) -C $(@D) $(TI_K3_IMAGE_GEN_MAKE_OPTS) > +endef > + > +define TI_K3_IMAGE_GEN_INSTALL_IMAGES_CMDS > + cp $(@D)/tiboot3.bin $(BINARIES_DIR) > +endef Best regards, Romain > + > +$(eval $(generic-package)) From romain.naour at gmail.com Sat Oct 1 17:47:32 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:47:32 +0200 Subject: [Buildroot] [PATCH v5 3/3] board/ti/am64x_sk: add new board In-Reply-To: <20220923205543.1518798-4-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-4-gadiyar@ti.com> Message-ID: <393a285a-1795-f992-8606-0c6e514992fd@gmail.com> Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar a ?crit?: > From: Xuanhao Shi > > Adds support for ti's am64x_sk board. > Adds the configs for generating output sdcard image. > Adds the defconfigs for am64x_sk. > > The AM64x_sk board is designed for the AM642 SoC with > two ARM Cortex-A53 and four ARM Cortex-R5. It also > supports RJ 45 Ethernet, Wi-Fi, and Bluetooth. > > More information about the board can be found at: > https://www.ti.com/tool/SK-AM64 > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 4 +++ > board/ti/am64x_sk/genimage.cfg | 27 +++++++++++++++++++ > board/ti/am64x_sk/readme.txt | 49 ++++++++++++++++++++++++++++++++++ > configs/am64x_sk_defconfig | 45 +++++++++++++++++++++++++++++++ > 4 files changed, 125 insertions(+) > create mode 100644 board/ti/am64x_sk/genimage.cfg > create mode 100644 board/ti/am64x_sk/readme.txt > create mode 100644 configs/am64x_sk_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index 81f095f799..121952369c 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -129,8 +129,10 @@ F: package/libxmlrpc/ > F: package/python-docopt/ > > N: Anand Gadiyar > +F: board/ti/am64x_sk/ > F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > +F: configs/am64x_sk_defconfig > > N: Andr? Zwing > F: package/libkrb5/ > @@ -3068,8 +3070,10 @@ N: Wojciech Nizi?ski > F: package/fwup/ > > N: Xuanhao Shi > +F: board/ti/am64x_sk/ > F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > +F: configs/am64x_sk_defconfig > > N: Yair Ben Avraham > F: package/casync/ > diff --git a/board/ti/am64x_sk/genimage.cfg b/board/ti/am64x_sk/genimage.cfg > new file mode 100644 > index 0000000000..26304fe98f > --- /dev/null > +++ b/board/ti/am64x_sk/genimage.cfg > @@ -0,0 +1,27 @@ > +image boot.vfat { > + vfat { > + files = { > + "tiboot3.bin", > + "tispl.bin", > + "u-boot.img", > + } > + } > + > + size = 16M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition u-boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + } > +} > diff --git a/board/ti/am64x_sk/readme.txt b/board/ti/am64x_sk/readme.txt > new file mode 100644 > index 0000000000..8096fcb2d4 > --- /dev/null > +++ b/board/ti/am64x_sk/readme.txt > @@ -0,0 +1,49 @@ > +Texas Instuments AM64x SK Test and Development Board > + > +Description > +=========== > + > +These configurations will build a complete image and > +device tree blobs for the the TI AM64x_sk board. > + > +How to build it > +=============== > + > +Select the default configuration for the target: > +$ make am64x_sk_defconfig > + > +Optional: modify the configuration: > +$ make menuconfig > + > +Build: > +$ make > + > +Result of the build: > +=================== > +output/images/ > ++-- soc > ++-- ti-connectivity > ++-- bl31.bin > ++-- boot.vfat > ++-- Image > ++-- k3-am642-sk.dtb > ++-- r5-u-boot-spl.bin > ++-- rootfs.ext2 > ++-- rootfs.ext4 > ++-- rootfs.tar > ++-- sdcard.img > ++-- tee.bin > ++-- tee-header_v2.bin > ++-- tee-pageable_v2.bin > ++-- tee-pager_v2.bin > ++-- tiboot3.bin > ++-- tispl.bin > ++-- u-boot.img > + > +To copy the image file to the sdcard use dd: > +$ dd if=output/images/sdcard.img of=/dev/sdX > + > +Insert the SDcard into the AM64x_sk board, and power it up with > +a USB Type-C connector. The system should come up. You can use > +a micro-USB to connect to the connector labled MAIN_UART0 to > +communicate with the board. > diff --git a/configs/am64x_sk_defconfig b/configs/am64x_sk_defconfig > new file mode 100644 > index 0000000000..1d37b411b3 > --- /dev/null > +++ b/configs/am64x_sk_defconfig > @@ -0,0 +1,45 @@ > +BR2_aarch64=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/am64x_sk/genimage.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19" > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am642-sk" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_PACKAGE_LINUX_FIRMWARE=y > +BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7.0" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="SPD=opteed" > +BR2_TARGET_OPTEE_OS=y > +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y > +BR2_TARGET_OPTEE_OS_PLATFORM="k3" > +BR2_TARGET_TI_K3_IMAGE_GEN=y > +BR2_TARGET_TI_K3_IMAGE_GEN_SOC="am64x" > +BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG="evm" > +BR2_TARGET_TI_K3_R5_LOADER_BOARD="am64x_evm"> +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10-rc1" Same comment as for patch 1/3, use a release version if possible. I have the sk-tda4vm evaluation board. I'll try to do a runtime test. Best regards, Romain > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am64x_evm_a53" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > +# BR2_TARGET_UBOOT_FORMAT_BIN is not set > +BR2_TARGET_UBOOT_FORMAT_IMG=y > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="tispl.bin" > +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="TEE=$(BINARIES_DIR)/tee-pager_v2.bin" > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y From yann.morin.1998 at free.fr Sat Oct 1 17:53:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 19:53:32 +0200 Subject: [Buildroot] [PATCH] or1k: Only define TARGET_HAVE_TLS when HAVE_AS_TLS In-Reply-To: References: <20220929145740.4846-1-shorne@gmail.com> Message-ID: <20221001175332.GN30794@scaer> Stafford, All, On 2022-10-01 11:35 +0000, Stafford Horne spake thusly: > On Thu, Sep 29, 2022 at 03:57:40PM +0100, Stafford Horne wrote: > > This was found when testing buildroot with linuxthreads enabled. In > > this case, the build passes --disable-tls to the toolchain during > > configuration. After building the OpenRISC toolchain it was still > > generating TLS code sequences and causing linker failures such as: > > > > ..../or1k-buildroot-linux-uclibc-gcc -o gpsd-3.24/gpsctl .... -lusb-1.0 -lm -lrt -lnsl > > ..../ld: ..../sysroot/usr/lib/libusb-1.0.so: undefined reference to `__tls_get_addr' > > > > This patch fixes this by disabling tls for the OpenRISC target when requested > > via --disable-tls. > > > > Tested-by: Yann E. MORIN > > > > gcc/ChangeLog: > > > > * config/or1k/or1k.cc (TARGET_HAVE_TLS): Only define if > > HAVE_AS_TLS is defined. > > I have pushed this upstream now. Adding buildroot patches should be easy to do > now. That's great, thanks for fixing this! :-) I'll poke my work alter-ego on Monday to look at providing the backports for Buildroot. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 18:19:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 20:19:38 +0200 Subject: [Buildroot] [RESEND v1 1/1] package/python-scipy: bump version to 1.9.1 In-Reply-To: <20220928193437.13407-1-guillaume.bressaix@gmail.com> References: <20220928193437.13407-1-guillaume.bressaix@gmail.com> Message-ID: <20221001181938.GO30794@scaer> Guillaume, All, On 2022-09-28 21:34 +0200, Guillaume W. Bres spake thusly: > Signed-off-by: Guillaume W. Bres > --- All that is below the triple-dash line will be dropped by git when we apply the patch. However, you provided interesting information in that post-commit-log message... > Scipy is expected to move to a meson build infrastructure > by the next release > > scipy-.tar.xz is no longer released. This should be part of the commit log proper, to explain why you switched to the .tar.gz archive. > For some reason, a new "Python.h" missing header > build time failure arised. I solve it with a -Ipython include. This should also be part of the commit log > Then test script failed, with linker/runtime missing symbols error, > all related to the linear algebra portion (which we do test). > Errors like "undefined reference to __atomic_compare_exchange 8" > regarding > "site-/scipy/optimize/_highs/_highs_wrapper.cpython-310-arm-linux-gnueabi.so" > to be specific. I solved it with a -latomic flag. I see you pass it via CFLAGS; that's not correct, it should be passed via LDFLAGS. If that doesnt work, it should be explained why. Also, we can't arbitrary link agains -latomic, because not all toolchains have it. See cairo.mk for how it should be conditionally used. Regards, Yann E. MORIN. > Once 1.9.2 is out, we know we already have my V3-1.9.1 patch > serie that builds "fine" with meson, it involved a minor tweak > (hopefuly solved by this time). The test script no longer did pass though, > this serie is not 100% ready to go > --- > package/python-scipy/python-scipy.hash | 2 +- > package/python-scipy/python-scipy.mk | 7 +++++-- > 2 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/package/python-scipy/python-scipy.hash b/package/python-scipy/python-scipy.hash > index 0274679c43..1ba239aabf 100644 > --- a/package/python-scipy/python-scipy.hash > +++ b/package/python-scipy/python-scipy.hash > @@ -1,5 +1,5 @@ > # Locally generated > -sha256 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 scipy-1.8.1.tar.xz > +sha256 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 scipy-1.9.1.tar.gz > sha256 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c LICENSE.txt > sha256 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 scipy/linalg/src/lapack_deprecations/LICENSE > sha256 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 scipy/ndimage/LICENSE.txt > diff --git a/package/python-scipy/python-scipy.mk b/package/python-scipy/python-scipy.mk > index a8c23c6c88..1619b9f40a 100644 > --- a/package/python-scipy/python-scipy.mk > +++ b/package/python-scipy/python-scipy.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -PYTHON_SCIPY_VERSION = 1.8.1 > -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz > +PYTHON_SCIPY_VERSION = 1.9.1 > +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz > PYTHON_SCIPY_SITE = https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) > PYTHON_SCIPY_LICENSE = \ > BSD-3-Clause, \ > @@ -36,6 +36,8 @@ PYTHON_SCIPY_INSTALL_STAGING = YES > PYTHON_SCIPY_SETUP_TYPE = setuptools > PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 > > +PYTHON_SCIPY_CFLAGS = \ > + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) > PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ > -L$(PYTHON3_PATH)/site-packages/numpy/core/lib > # -lnpyrandom localization > @@ -44,6 +46,7 @@ PYTHON_SCIPY_LDFLAGS += \ > > PYTHON_SCIPY_ENV = \ > F90=$(TARGET_FC) \ > + CFLAGS="$(PYTHON_SCIPY_CFLAGS) -latomic" \ > LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" > > # Provide system configuration options to numpy distutils extensions, telling > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 18:51:47 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 20:51:47 +0200 Subject: [Buildroot] [PATCH] package/mdio-tools: new package In-Reply-To: <20220928192324.1279960-1-robimarko@gmail.com> References: <20220928192324.1279960-1-robimarko@gmail.com> Message-ID: <20221001185147.GP30794@scaer> Robert, All, On 2022-09-28 21:23 +0200, Robert Marko spake thusly: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- [--SNIP--] > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > new file mode 100644 > index 0000000000..e4ea6f8224 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,16 @@ > +################################################################################ > +# > +# mdio-tools > +# > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0-only We do not strictly follow the SPDX nomenclature (because we somewhat predate it), so for consistency, this should be just 'GPL-2.0'. > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = libmnl mdio-tools uses pkg-config to look for libmnl, so you also need to add host-pkgconf to the _DEPENDENCES. > +MDIO_TOOLS_MODULE_SUBDIRS = kernel I did not have a thorough look, but doesn't mdio-tools need some kernel options to always be enabled? IF so, you can do so with: define MDIO_TOOLS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO) endef (given the package name, it should at least require that, I'd guess, but adapt as needed.) If there had been only the license and host-pkgconf issues, I'd have fixed those when applying. But the kernel options are a bit more involved, and requie someone who actually knows and uses mdio-tools, to come up with the required options. Can you look into that, please? Regards, Yann E. MORIN. > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From robimarko at gmail.com Sat Oct 1 19:05:36 2022 From: robimarko at gmail.com (Robert Marko) Date: Sat, 1 Oct 2022 21:05:36 +0200 Subject: [Buildroot] [PATCH] package/mdio-tools: new package In-Reply-To: <20221001185147.GP30794@scaer> References: <20220928192324.1279960-1-robimarko@gmail.com> <20221001185147.GP30794@scaer> Message-ID: On Sat, 1 Oct 2022 at 20:51, Yann E. MORIN wrote: > > Robert, All, > > On 2022-09-28 21:23 +0200, Robert Marko spake thusly: > > mdio-tools are kernel module and accompanying tools for low-level > > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > > > Userspace tools provide C22 or C45 reads and writes, benchmarking > > and even dedicated Marvell Link Street tools via the included > > kernel module. > > > > Signed-off-by: Robert Marko > > --- > [--SNIP--] > > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > > new file mode 100644 > > index 0000000000..e4ea6f8224 > > --- /dev/null > > +++ b/package/mdio-tools/mdio-tools.mk > > @@ -0,0 +1,16 @@ > > +################################################################################ > > +# > > +# mdio-tools > > +# > > +################################################################################ > > + > > +MDIO_TOOLS_VERSION = 1.2.0 > > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > > +MDIO_TOOLS_LICENSE = GPL-2.0-only > > We do not strictly follow the SPDX nomenclature (because we somewhat > predate it), so for consistency, this should be just 'GPL-2.0'. Hi, I will change it, wasn't really sure what was appropriate so I went with SPDX. > > > +MDIO_TOOLS_LICENSE_FILES = COPYING > > +MDIO_TOOLS_DEPENDENCIES = libmnl > > mdio-tools uses pkg-config to look for libmnl, so you also need to add > host-pkgconf to the _DEPENDENCES. Will fixup in v2. > > > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > > I did not have a thorough look, but doesn't mdio-tools need some kernel > options to always be enabled? IF so, you can do so with: > > define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO) > endef > > (given the package name, it should at least require that, I'd guess, but > adapt as needed.) Thanks for reminding me of this, haven't really though of that, but as far as I can tell it basically needs generic netlink which gets compiled if CONFIG_NET is set, that is minimum. CONFIG_MDIO_DEVICE is then required so that mdio buses actually can be used. > > If there had been only the license and host-pkgconf issues, I'd have > fixed those when applying. But the kernel options are a bit more > involved, and requie someone who actually knows and uses mdio-tools, to > come up with the required options. Can you look into that, please? Will fix this up v2, thanks for the review. Regards, Robert > > Regards, > Yann E. MORIN. > > > +$(eval $(kernel-module)) > > +$(eval $(autotools-package)) > > -- > > 2.37.3 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:07:02 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:07:02 +0200 Subject: [Buildroot] [PATCH] package/linux-tools: Exclude checking PE binaries from perf test In-Reply-To: References: <20220927221133.594071-1-f.fainelli@gmail.com> <20220928233856.77bb191c@windsurf> Message-ID: <20221001190702.GQ30794@scaer> Florian, All, On 2022-09-28 15:28 -0700, Florian Fainelli spake thusly: > On 9/28/22 14:38, Thomas Petazzoni wrote: > >On Tue, 27 Sep 2022 15:11:33 -0700 > >Florian Fainelli wrote: > >>Since upstream Linux commit ed21d6d7c48e6e96c2d617e304a7ebfbd17b1807 > >>("perf tests: Add test for PE binary format support") present in >= > >>v5.10 there is an unconditional installation of PE binaries which will > >>be rejected by the check-bin-arch script. > >> > >>Make sure that these binaries are excluded from being checked to allow > >>the installation of the perf tests. > >> > >>Fixes: 6fcdaa4c5096 ("package/linux-tools: Allow installation of perf scripts") > >>Signed-off-by: Florian Fainelli > > > >Thanks for the patch! Before merging it, I'd like to understand a > >little bit more how readelf behaves for these PE files. Indeed in > >check-bin-arch, we are doing: > > > > arch=$(LC_ALL=C ${readelf} -h "${TARGET_DIR}/${f}" 2>&1 | \ > > sed -r -e '/^ Machine: +(.+)/!d; s//\1/;' | head -1) > > > > # If no architecture found, assume it was not an ELF file > > if test "${arch}" = "" ; then > > continue > > fi > > > >for a PE file, I would expect readelf to badly fail, and therefore > >${arch} to be empty, and the file simply ignored. > > > >What is the behavior/output of readelf on these PE files? > > If I use my host system readelf which is packaged from > binutils-x86-64-linux-gnu, I get no output and all is well, however when > check-bin-arch is called and it uses $(TARGET_READELF), I do get: > > ./host/bin/aarch64-linux-readelf -h > build/linux-custom/tools/perf/tests/pe-file.exe | sed -r -e '/^ Machine: > +(.+)/!d; s//\1/;' | head -1 > IMAGE_FILE_MACHINE_AMD64 (0x8664) > > which is what prompted me to issue this patch in the first place. > > I should mention that the readelf binary in this case is the LLVM Object > Reader and it does support PE/COFF which is probably why it even remotely > attempts to parse the file. OK, but isn't that flawed? It is named 'readelf', so I would expect it to not report on non-ELF files, at least by default (i.e. unless a specific option flag is passed). If a readelf tool does not behave like a readelf tool should behave, isn't that a bug in that specific readelf tool to begin with? Otherwise, it is very intriguing how you managed to have a toolchain without gcc et al, be usable for Buildroot that only knows about the GNU ecosystem. Is that a publicly available toolchain? Can you share the recipe how that toolchain was generated? Do you have special, local changes in Buildroot to accomodate that toolchain? Will you submit those changes? That would allow adding more testing to avoid such issue in the future. Otherwise, I am not fan of adding such exclusion for private cases that we can not (easily) reproduce, as those cases are not supported. Regards, Yann E. MORIN. > -- > Florian > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:15:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:15:18 +0200 Subject: [Buildroot] [git commit] package/dnsmasq: security bump to version 2.87 Message-ID: <20221001191532.8339286703@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=22d6788619b17ebbe90eeccf7d754a45ab10c05a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From yann.morin.1998 at free.fr Sat Oct 1 19:16:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:16:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/dnsmasq: security bump to version 2.87 In-Reply-To: <20220927184401.12423-1-fontaine.fabrice@gmail.com> References: <20220927184401.12423-1-fontaine.fabrice@gmail.com> Message-ID: <20221001191624.GR30794@scaer> Fabrice, All, On 2022-09-27 20:44 +0200, Fabrice Fontaine spake thusly: > - Fix CVE-2022-0934: > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html > - Drop patches (already in version) > - Update hash of COPYING, slight updates: > https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 > > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...-src-option.c-fix-build-with-gcc-4.8.patch | 52 ----------------- > ...9080ff8743133fbd52427b4b2213171-typo.patch | 36 ------------ > ...-not-DNSSEC-compile-options-selected.patch | 34 ----------- > ...src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ------------------- > package/dnsmasq/dnsmasq.hash | 6 +- > package/dnsmasq/dnsmasq.mk | 2 +- > 6 files changed, 4 insertions(+), 183 deletions(-) > delete mode 100644 package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > delete mode 100644 package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > delete mode 100644 package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > delete mode 100644 package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > > diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > deleted file mode 100644 > index 50ecf2f18a..0000000000 > --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > +++ /dev/null > @@ -1,52 +0,0 @@ > -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Fri, 31 Dec 2021 17:29:44 +0100 > -Subject: [PATCH] src/option.c: fix build with gcc 4.8 > - > -Fix the following build failure with gcc 4.8 raised since version 2.86: > - > -option.c: In function 'one_opt': > -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode > - for (char *p = arg; *p; p++) { > - ^ > -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code > -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode > - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > - ^ > - > -Fixes: > - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] > ---- > - src/option.c | 6 ++++-- > - 1 file changed, 4 insertions(+), 2 deletions(-) > - > -diff --git a/src/option.c b/src/option.c > -index ff54def..c57f6d8 100644 > ---- a/src/option.c > -+++ b/src/option.c > -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - arg += 9; > - if (strlen(arg) != 16) > - ret_err(gen_err); > -- for (char *p = arg; *p; p++) { > -+ char *p; > -+ for (*p = arg; *p; p++) { > - if (!isxdigit((int)*p)) > - ret_err(gen_err); > - } > -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - > - u8 *u = daemon->umbrella_device; > - char word[3]; > -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > -+ u8 i; > -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > - memcpy(word, &(arg[0]), 2); > - *u++ = strtoul(word, NULL, 16); > - } > --- > -2.33.0 > - > diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > deleted file mode 100644 > index 8cdf5b3f1b..0000000000 > --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > +++ /dev/null > @@ -1,36 +0,0 @@ > -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 > -From: Simon Kelley > -Date: Sat, 1 Jan 2022 23:03:26 +0000 > -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. > - > -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] > -Signed-off-by: Fabrice Fontaine > ---- > - src/option.c | 4 ++-- > - 1 file changed, 2 insertions(+), 2 deletions(-) > - > -diff --git a/src/option.c b/src/option.c > -index c57f6d8..6f56ce8 100644 > ---- a/src/option.c > -+++ b/src/option.c > -@@ -357,7 +357,7 @@ static const struct myoption opts[] = > - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, > - { "dynamic-host", 1, 0, LOPT_DYNHOST }, > - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, > -- { "umbrella", 2, 0, LOPT_UMBRELLA }, > -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, > - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, > - { NULL, 0, 0, 0 } > - }; > -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - if (strlen(arg) != 16) > - ret_err(gen_err); > - char *p; > -- for (*p = arg; *p; p++) { > -+ for (p = arg; *p; p++) { > - if (!isxdigit((int)*p)) > - ret_err(gen_err); > - } > --- > -2.33.0 > - > diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > deleted file mode 100644 > index 9c98af2be5..0000000000 > --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > +++ /dev/null > @@ -1,34 +0,0 @@ > -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 > -From: Simon Kelley > -Date: Tue, 28 Sep 2021 23:42:15 +0100 > -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile > - options selected. > - > -[Retrieved from: > -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] > -Signed-off-by: Fabrice Fontaine > ---- > - src/dnsmasq.h | 5 ++++- > - 1 file changed, 4 insertions(+), 1 deletion(-) > - > -diff --git a/src/dnsmasq.h b/src/dnsmasq.h > -index c8a918a..3fdc1b0 100644 > ---- a/src/dnsmasq.h > -+++ b/src/dnsmasq.h > -@@ -1173,9 +1173,12 @@ extern struct daemon { > - char *packet; /* packet buffer */ > - int packet_buff_sz; /* size of above */ > - char *namebuff; /* MAXDNAME size buffer */ > -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) > -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ > -+ char *workspacename; > -+#endif > - #ifdef HAVE_DNSSEC > - char *keyname; /* MAXDNAME size buffer */ > -- char *workspacename; /* ditto */ > - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ > - int rr_status_sz; > - int dnssec_no_time_check; > --- > -2.20.1 > - > diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > deleted file mode 100644 > index 90bb02b23a..0000000000 > --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > +++ /dev/null > @@ -1,57 +0,0 @@ > -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sun, 2 Jan 2022 21:57:52 +0100 > -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 > - > -Fix the following build failure: > - > -pattern.c: In function 'is_valid_dns_name': > -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode > - for (const char *c = value;; c++) > - ^ > -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code > -pattern.c: In function 'is_valid_dns_name_pattern': > -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode > - for (const char *c = value;; c++) > - ^ > - > -Signed-off-by: Fabrice Fontaine > -[Retrieved from: > -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] > ---- > - src/pattern.c | 8 ++++---- > - 1 file changed, 4 insertions(+), 4 deletions(-) > - > -diff --git a/src/pattern.c b/src/pattern.c > -index 03e23b9..928d259 100644 > ---- a/src/pattern.c > -+++ b/src/pattern.c > -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) > - > - size_t num_bytes = 0; > - size_t num_labels = 0; > -- const char *label = NULL; > -+ const char *c, *label = NULL; > - int is_label_numeric = 1; > -- for (const char *c = value;; c++) > -+ for (c = value;; c++) > - { > - if (*c && > - *c != '-' && *c != '.' && > -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) > - > - size_t num_bytes = 0; > - size_t num_labels = 0; > -- const char *label = NULL; > -+ const char *c, *label = NULL; > - int is_label_numeric = 1; > - size_t num_wildcards = 0; > - int previous_label_has_wildcard = 1; > -- for (const char *c = value;; c++) > -+ for (c = value;; c++) > - { > - if (*c && > - *c != '*' && /* Wildcard. */ > --- > -2.20.1 > - > diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash > index 804012821e..78127ca714 100644 > --- a/package/dnsmasq/dnsmasq.hash > +++ b/package/dnsmasq/dnsmasq.hash > @@ -1,6 +1,6 @@ > # Locally calculated after checking pgp signature > -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc > -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz > +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc > +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz > # Locally calculated > -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 > diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk > index 230e4a8116..46a40c4bbb 100644 > --- a/package/dnsmasq/dnsmasq.mk > +++ b/package/dnsmasq/dnsmasq.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -DNSMASQ_VERSION = 2.86 > +DNSMASQ_VERSION = 2.87 > DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz > DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq > DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:34:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:34:14 +0200 Subject: [Buildroot] [PATCH] package/sleef: add new package In-Reply-To: <20220927142604.17035-1-kk@aibs.ru> References: <20220927142604.17035-1-kk@aibs.ru> Message-ID: <20221001193414.GS30794@scaer> Kirill, All, On 2022-09-27 17:26 +0300, Kirill Kranke spake thusly: > SLEEF is a library that implements vectorized versions > of C standard math functions. This library also > includes DFT subroutines. > > https://sleef.org/ > Signed-off-by: Kirill Kranke > --- [--SNIP--] > diff --git a/package/sleef/Config.in b/package/sleef/Config.in > new file mode 100644 > index 0000000000..85f93d384e > --- /dev/null > +++ b/package/sleef/Config.in > @@ -0,0 +1,50 @@ > +config BR2_PACKAGE_SLEEF_ARCH_SUPPORTS > + bool > + default y if BR2_arm > + default y if BR2_aarch64 > + default y if BR2_i386 > + default y if BR2_x86_64 > + default y if BR2_powerpc64 > + > +config BR2_PACKAGE_SLEEF > + bool "sleef" You forgot to add the actual dependency on BR2_PACKAGE_SLEEF_ARCH_SUPPORTS here. > + help > + SLEEF is a library that implements vectorized versions > + of C standard math functions. This library also > + includes DFT subroutines. > + > + https://sleef.org/ If I understand correctly, by default, only the libm is built. This should probably be specified in the help text for the main symbol. > +if BR2_PACKAGE_SLEEF > + > +config BR2_PACKAGE_SLEEF_DFT > + bool "compile dft" > + default n default n is the default, so it should npt be specified. > + help > + libsleefdft will be built The helpe text does not provide much more information that the prompt, so there is no need for the help text, unless we can come up with a better help (see below) So: config BR2_PACKAGE_SLEEF_LIBDFT bool "libsleefdft" help libsleefdft contains functions to perform DFT (discreet Fourrier transform). Adapt as you see fit. And so on for the other options. > +config BR2_PACKAGE_SLEEF_QUAD > + bool "compile quad" > + default n > + help > + libsleefquad will be built > + > +config BR2_PACKAGE_SLEEF_GNUABI_LIBS > + bool "compile gnuabi" > + default y > + help > + libsleefgnuabi will be built > + > +config BR2_PACKAGE_SLEEF_SCALAR_LIB > + bool "compile scalar" > + default n > + help > + libsleefscalar will be built > + > +config BR2_PACKAGE_SLEEF_TESTS > + bool "compile tests" > + default n > + help > + Tests will be built > + > +endif > diff --git a/package/sleef/sleef.hash b/package/sleef/sleef.hash > new file mode 100644 > index 0000000000..51570a5176 > --- /dev/null > +++ b/package/sleef/sleef.hash > @@ -0,0 +1,3 @@ > +# Locally calculated > +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE.txt > +sha256 415ee9b1bcc5816989d3d4d92afd0cd3f9ee89cbd5a33eb008e69751e40438ab sleef-3.5.1.tar.gz > diff --git a/package/sleef/sleef.mk b/package/sleef/sleef.mk > new file mode 100644 > index 0000000000..46bef69f5f > --- /dev/null > +++ b/package/sleef/sleef.mk > @@ -0,0 +1,49 @@ > +################################################################################ > +# > +# sleef > +# > +################################################################################ > + > +SLEEF_VERSION = 3.5.1 > +SLEEF_SITE = $(call github,shibatch,sleef,$(SLEEF_VERSION)) > +SLEEF_LICENSE = BSL-1.0 > +SLEEF_LICENSE_FILES = LICENSE.txt > +SLEEF_SUPPORTS_IN_SOURCE_BUILD = NO > +SLEEF_INSTALL_STAGING = YES > + > +# N.B. Need to use host sleef during cross compilation. > +SLEEF_DEPENDENCIES = host-sleef > +SLEEF_CONF_OPTS += -DNATIVE_BUILD_DIR=$(BUILD_DIR)/host-sleef-$(SLEEF_VERSION)/buildroot-build You will have to explain in the commit log why you need to point to the host-sleef build directory, and why you can't use the installed one, in $(HOST_DIR). Also, a package build directory is accessed with $(HOST_SLEEF_BUILDDIR) and for cmake based packages, it already includes the /buildroot-build sub-directory component: make show-vars |jq .HOST_SLEEF_BUILDDIR Otherwise, it looks good. Except forthe missing explanations about the use of the build directory of the host packag, I could have fixed the rest when applying. Can you elaborate on that part, fix the other minor issues and respin, please? Regards, Yann E. MORIN. > +ifeq ($(BR2_PACKAGE_SLEEF_DFT),y) > +SLEEF_CONF_OPTS += -DBUILD_DFT=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_DFT=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_QUAD),y) > +SLEEF_CONF_OPTS += -DBUILD_QUAD=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_QUAD=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_GNUABI_LIBS),y) > +SLEEF_CONF_OPTS += -DBUILD_GNUABI_LIBS=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_GNUABI_LIBS=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_SCALAR_LIB),y) > +SLEEF_CONF_OPTS += -DBUILD_SCALAR_LIB=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_SCALAR_LIB=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_TESTS),y) > +SLEEF_CONF_OPTS += -DBUILD_TESTS=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_TESTS=OFF > +endif > + > +$(eval $(cmake-package)) > +$(eval $(host-cmake-package)) > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:53:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:53:40 +0200 Subject: [Buildroot] [PATCH] package/python-remi: bump version to 2022.7.27 In-Reply-To: <1664283942-24229-1-git-send-email-gwenj@trabucayre.com> References: <1664283942-24229-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221001195340.GT30794@scaer> Gwenhael, All, On 2022-09-27 15:05 +0200, Gwenhael Goavec-Merou spake thusly: > From: Gwenhael Goavec-Merou > > Signed-off-by: Gwenhael Goavec-Merou Applied to master, thanks. But see below... [--SNIP--] > PYTHON_REMI_LICENSE = Apache-2.0 There is a file named LICENSE in the tree. Could you update our packaging to use that file, and add a hash for it, please? Regards, Yann E. MORIN. > PYTHON_REMI_SETUP_TYPE = setuptools > > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:51:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:51:39 +0200 Subject: [Buildroot] [git commit] package/python-remi: bump version to 2022.7.27 Message-ID: <20221001195349.D33FD86708@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43a40036154c16e9448bbbcf41ab3b1e296e949a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Yann E. MORIN --- package/python-remi/python-remi.hash | 2 +- package/python-remi/python-remi.mk | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/python-remi/python-remi.hash b/package/python-remi/python-remi.hash index 4e1786a952..82234bbe98 100644 --- a/package/python-remi/python-remi.hash +++ b/package/python-remi/python-remi.hash @@ -1,2 +1,2 @@ # sha256 from https://pypi.org/pypi/remi/json -sha256 c8691f007dc30b91013131b6aded3521c17ef8ec9fdd152a0ad481b8cb793f14 remi-2021.3.2.tar.gz +sha256 542df88e174bbd58fe763c49e5c2116f2c8413c1a934731069ed8c17bb9cd64c remi-2022.7.27.tar.gz diff --git a/package/python-remi/python-remi.mk b/package/python-remi/python-remi.mk index 609e127cf0..7e43c09b00 100644 --- a/package/python-remi/python-remi.mk +++ b/package/python-remi/python-remi.mk @@ -4,9 +4,10 @@ # ################################################################################ -PYTHON_REMI_VERSION = 2021.3.2 +PYTHON_REMI_VERSION = 2022.7.27 PYTHON_REMI_SOURCE = remi-$(PYTHON_REMI_VERSION).tar.gz -PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/c0/99/94bd825cf8baee369b959f76c802a51ccc69d4d62ec113e26db4835f710c +PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/b7/5c/fca9d9273fc9d5f4ca0bc2f387ca19f8ba9979dcb75617d094e575dc2337 + PYTHON_REMI_LICENSE = Apache-2.0 PYTHON_REMI_SETUP_TYPE = setuptools From yann.morin.1998 at free.fr Sat Oct 1 20:30:02 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:30:02 +0200 Subject: [Buildroot] [git commit] package/python-maturin: bump to version 0.13.5 Message-ID: <20221001203201.1988E86712@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6ba3f9a11fe2f5df9dfe760f0211cc58982be82b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index 7babd70111..e2de1123ac 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 33f7cc8cd0a05bdd577afda1482e6bd5e33ad881366b1e9333625e063852cdd7 maturin-0.13.3.tar.gz +sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index b239f282ba..f67f0ef562 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.3 +PYTHON_MATURIN_VERSION = 0.13.5 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/f2/5c/af29a40fde2c8fea1e34e79a5d43e2a4278a685c1c9039c107444f9312d9 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit From yann.morin.1998 at free.fr Sat Oct 1 20:34:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:34:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.5 In-Reply-To: <20220927081045.1059596-1-james.hilliard1@gmail.com> References: <20220927081045.1059596-1-james.hilliard1@gmail.com> Message-ID: <20221001203408.GU30794@scaer> James, All, On 2022-09-27 02:10 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/python-maturin/python-maturin.hash | 2 +- > package/python-maturin/python-maturin.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash > index 7babd70111..e2de1123ac 100644 > --- a/package/python-maturin/python-maturin.hash > +++ b/package/python-maturin/python-maturin.hash > @@ -1,5 +1,5 @@ > # Locally calculated after vendoring > -sha256 33f7cc8cd0a05bdd577afda1482e6bd5e33ad881366b1e9333625e063852cdd7 maturin-0.13.3.tar.gz > +sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz > # Locally computed sha256 checksums > sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache > sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit > diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk > index b239f282ba..f67f0ef562 100644 > --- a/package/python-maturin/python-maturin.mk > +++ b/package/python-maturin/python-maturin.mk > @@ -4,9 +4,9 @@ > # > ################################################################################ > > -PYTHON_MATURIN_VERSION = 0.13.3 > +PYTHON_MATURIN_VERSION = 0.13.5 > PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz > -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/f2/5c/af29a40fde2c8fea1e34e79a5d43e2a4278a685c1c9039c107444f9312d9 > +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 > PYTHON_MATURIN_SETUP_TYPE = setuptools > PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT > PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:53:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:53:54 +0200 Subject: [Buildroot] [PATCH] package/efivar: bump to version 38 In-Reply-To: <20220927105829.760755-1-nunes.erico@gmail.com> References: <20220927105829.760755-1-nunes.erico@gmail.com> Message-ID: <20221001205354.GV30794@scaer> On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Drop backported patches and rebase the ones that are still relevant. > > From version 37 to 38, there is a new build system in place, which is > still custom Makefiles. > It is not cross-compilation friendly and includes host tools, so a > few workarounds are required to prevent things being built or rebuilt > wrongly for host or target. [--SNIP--] > diff --git a/package/efivar/efivar.mk b/package/efivar/efivar.mk > index 8708057b18..aaea33c01d 100644 > --- a/package/efivar/efivar.mk > +++ b/package/efivar/efivar.mk [--SNIP--] > @@ -21,16 +21,36 @@ define EFIVAR_BUILD_CMDS > # $(HOST_CC), otherwise it gets cross-built. > $(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) \ > CFLAGS="$(HOST_CFLAGS) -std=gnu99" \ > - $(MAKE) -C $(@D)/src gcc_cflags= makeguids > + TOPDIR=$(@D) CFLAGS_GCC= \ > + $(MAKE) -C $(@D)/src makeguids > > + # util.o needs to be rebuilt for target > + mv -v $(@D)/src/util.o $(@D)/src/util_host.o This dual build commands hint at the need for a host-efivar package that builds makeguids, and patch src/Makefile to use an existing $(MAKEGUIDS) e.g. (mock diff for the sake of ilustration): +MAKEGUIDS ?= makeguids -$(MAKEGUIDS_OUTPUT) : makeguids -$(MAKEGUIDS_OUTPUT) : guids.txt +$(MAKEGUIDS_OUTPUT) : guids.txt $(MAKEGUIDS) -./makeguids $(LD_DASH_T) guids.txt ... +$(MAKEGUIDS) $(LD_DASH_T) guids.txt ... (yeah, this is very borked, but it's just to explain what I have in mind). > + > + # Some workarounds for cross-compilation: > + # MAKEGUIDS_SOURCES is undefined so it doesn't pick host flags for > + # util.o or attempt to build makeguids again. > + # SUBDIRS is redefined so it skips building docs. > + # LD_DASH_T is redefined as the linker detection fails with Buildroot. > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > AR=$(TARGET_AR) NM=$(TARGET_NM) RANLIB=$(TARGET_RANLIB) \ > $(EFIVAR_MAKE_OPTS) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > + LD_DASH_T=-T \ Those should probably go into EFIVAR_MAKE_OPTS, as EFI_VAR_MAKE_OPTS is already used for EFIVAR_BUILD_CMDS, EFIVAR_INSTALL_TARGET_CMDS, and EFIVAR_STAGING_INSTALL_CMDS. > all > + > + # skip 'all' in install so in staging/target installs it won't try > + # to build everything again due to the workarounds above > + $(SED) 's/install : all/install :/g' $(@D)/src/Makefile This sed is not conditional, and it munges an existing, static file, so it should be done with a patch. Regards, Yann E. MORIN. > endef > > define EFIVAR_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > $(EFIVAR_MAKE_OPTS) \ > DESTDIR="$(STAGING_DIR)" \ > install > @@ -38,6 +58,9 @@ endef > > define EFIVAR_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > $(EFIVAR_MAKE_OPTS) \ > DESTDIR="$(TARGET_DIR)" \ > install > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:54:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:54:59 +0200 Subject: [Buildroot] [PATCH] package/efibootmgr: bump to version 18 In-Reply-To: <20220927105835.760768-1-nunes.erico@gmail.com> References: <20220927105835.760768-1-nunes.erico@gmail.com> Message-ID: <20221001205459.GW30794@scaer> Erico, All, On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Drop patches which are already applied upstream. > > Signed-off-by: Erico Nunes Does this change depend on the efivar bump, or can it be applied independently? Regards, Yann E. MORIN. > --- > .../0001-Allow-build-with-uClibc.patch | 40 ------------------- > .../efibootmgr/0002-remove-extra-decl.patch | 28 ------------- > package/efibootmgr/efibootmgr.hash | 2 +- > package/efibootmgr/efibootmgr.mk | 2 +- > 4 files changed, 2 insertions(+), 70 deletions(-) > delete mode 100644 package/efibootmgr/0001-Allow-build-with-uClibc.patch > delete mode 100644 package/efibootmgr/0002-remove-extra-decl.patch > > diff --git a/package/efibootmgr/0001-Allow-build-with-uClibc.patch b/package/efibootmgr/0001-Allow-build-with-uClibc.patch > deleted file mode 100644 > index fd29233dc3..0000000000 > --- a/package/efibootmgr/0001-Allow-build-with-uClibc.patch > +++ /dev/null > @@ -1,40 +0,0 @@ > -From bbfcc60497c326576bb23cb01d90115ef3cf6947 Mon Sep 17 00:00:00 2001 > -From: Andy Shevchenko > -Date: Fri, 25 Nov 2016 20:26:52 +0200 > -Subject: [PATCH] Remove unneeded include > - > -This fixes the build with uClibc. > - > -Signed-off-by: Andy Shevchenko > ---- > - src/efibootdump.c | 1 - > - src/eficonman.c | 1 - > - 2 files changed, 2 deletions(-) > - > -diff --git a/src/efibootdump.c b/src/efibootdump.c > -index 6ff8360..7c5a1c5 100644 > ---- a/src/efibootdump.c > -+++ b/src/efibootdump.c > -@@ -19,7 +19,6 @@ > - #include > - #include > - #include > --#include > - #include > - > - #include "error.h" > -diff --git a/src/eficonman.c b/src/eficonman.c > -index 2c2be38..9bfae79 100644 > ---- a/src/eficonman.c > -+++ b/src/eficonman.c > -@@ -17,7 +17,6 @@ > - #include > - #include > - #include > --#include > - #include > - > - #define _(String) gettext (String) > --- > -2.10.2 > - > diff --git a/package/efibootmgr/0002-remove-extra-decl.patch b/package/efibootmgr/0002-remove-extra-decl.patch > deleted file mode 100644 > index f838d50a20..0000000000 > --- a/package/efibootmgr/0002-remove-extra-decl.patch > +++ /dev/null > @@ -1,28 +0,0 @@ > -From 99b578501643377e0b1994b2a068b790d189d5ad Mon Sep 17 00:00:00 2001 > -From: Peter Jones > -Date: Wed, 13 Jun 2018 09:41:01 -0400 > -Subject: [PATCH] remove extra decl > - > -Downloaded from upstream commit > -https://github.com/rhboot/efibootmgr/commit/99b578501643377e0b1994b2a068b790d189d5ad > - > -Signed-off-by: Peter Jones > -Signed-off-by: Bernd Kuhls > ---- > - src/efibootmgr.c | 3 --- > - 1 file changed, 3 deletions(-) > - > -diff --git a/src/efibootmgr.c b/src/efibootmgr.c > -index de38f01..4e1a680 100644 > ---- a/src/efibootmgr.c > -+++ b/src/efibootmgr.c > -@@ -1536,9 +1536,6 @@ parse_opts(int argc, char **argv) > - "invalid numeric value %s\n", > - optarg); > - } > -- /* XXX efivar-36 accidentally doesn't have a public > -- * header for this */ > -- extern int efi_set_verbose(int verbosity, FILE *errlog); > - efi_set_verbose(opts.verbose - 2, stderr); > - break; > - case 'V': > diff --git a/package/efibootmgr/efibootmgr.hash b/package/efibootmgr/efibootmgr.hash > index fdbc9a2732..71a9826331 100644 > --- a/package/efibootmgr/efibootmgr.hash > +++ b/package/efibootmgr/efibootmgr.hash > @@ -1,3 +1,3 @@ > # locally computed hash > -sha256 22a95ebe0d5c9fb2915b3a100450f8f37484d1dbb8b296f55b343cc84f10397d efibootmgr-17.tar.gz > +sha256 442867d12f8525034a404fc8af3036dba8e1fc970998af2486c3b940dfad0874 efibootmgr-18.tar.gz > sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > diff --git a/package/efibootmgr/efibootmgr.mk b/package/efibootmgr/efibootmgr.mk > index 7e09b5f659..672a93c282 100644 > --- a/package/efibootmgr/efibootmgr.mk > +++ b/package/efibootmgr/efibootmgr.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -EFIBOOTMGR_VERSION = 17 > +EFIBOOTMGR_VERSION = 18 > EFIBOOTMGR_SITE = $(call github,rhboot,efibootmgr,$(EFIBOOTMGR_VERSION)) > EFIBOOTMGR_LICENSE = GPL-2.0+ > EFIBOOTMGR_LICENSE_FILES = COPYING > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:56:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:56:56 +0200 Subject: [Buildroot] [git commit] package/acpica: bump to version 20220331 Message-ID: <20221001205715.EC74F86723@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=373fb7fcc963e79bdc08ec62db0d628e4e639476 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Erico Nunes Signed-off-by: Yann E. MORIN --- package/acpica/acpica.hash | 4 ++-- package/acpica/acpica.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash index a2fdfe602e..4b6981c602 100644 --- a/package/acpica/acpica.hash +++ b/package/acpica/acpica.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 8a49904744a8159b7f325ed941b56968ba37a0371c634036628064f97538de4b acpica-unix2-20200717.tar.gz -sha256 cb17c679d3291eba1a70a1336062fb07eec2e839b0821b443b24f41de18c5218 source/include/acpi.h +sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz +sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h diff --git a/package/acpica/acpica.mk b/package/acpica/acpica.mk index 21ecc155be..9901c1ed48 100644 --- a/package/acpica/acpica.mk +++ b/package/acpica/acpica.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPICA_VERSION = 20200717 +ACPICA_VERSION = 20220331 ACPICA_SOURCE = acpica-unix2-$(ACPICA_VERSION).tar.gz ACPICA_SITE = https://acpica.org/sites/acpica/files ACPICA_LICENSE = BSD-3-Clause or GPL-2.0 From yann.morin.1998 at free.fr Sat Oct 1 20:56:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:56:59 +0200 Subject: [Buildroot] [git commit] package/fwts: bump to version 22.09.00 Message-ID: <20221001205716.04F2086724@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=95e9a681e7fd2f823b26c3e70d6b12482f0c33ac branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Erico Nunes Signed-off-by: Yann E. MORIN --- package/fwts/0001-build-do-not-use-Werror.patch | 26 ++++++++++++------------- package/fwts/fwts.hash | 2 +- package/fwts/fwts.mk | 2 +- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/package/fwts/0001-build-do-not-use-Werror.patch b/package/fwts/0001-build-do-not-use-Werror.patch index 715c4f63a5..c6a84537ed 100644 --- a/package/fwts/0001-build-do-not-use-Werror.patch +++ b/package/fwts/0001-build-do-not-use-Werror.patch @@ -1,4 +1,4 @@ -From e481c2f990ffa71f205d4b9daf0823e71269a7f3 Mon Sep 17 00:00:00 2001 +From feb05271b484b158c14611839f968109e9cf3082 Mon Sep 17 00:00:00 2001 From: Erico Nunes Date: Fri, 12 Aug 2016 23:11:56 +0200 Subject: [PATCH] fwts: do not use -Werror @@ -25,7 +25,7 @@ Signed-off-by: Vincent Stehl?? 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac -index f40c3678..0ff5025b 100644 +index ca2f54e2..ed584abf 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ @@ -36,25 +36,25 @@ index f40c3678..0ff5025b 100644 AC_CANONICAL_HOST AC_CONFIG_MACRO_DIR([m4]) diff --git a/src/Makefile.am b/src/Makefile.am -index cdabb386..7c2e5730 100644 +index 3bb35e5c..e9fe92fe 100644 --- a/src/Makefile.am +++ b/src/Makefile.am -@@ -12,7 +12,7 @@ AM_CPPFLAGS = \ - -I$(top_srcdir)/src/acpica/source/compiler \ +@@ -13,7 +13,7 @@ AM_CPPFLAGS = \ -I$(top_srcdir)/efi_runtime \ - -pthread `pkg-config --cflags glib-2.0 gio-2.0` \ + -I$(top_srcdir)/smccc_test \ + -pthread \ - -Wall -Werror -Wextra \ -+ -Wall -Wextra \ ++ -Wall -Wextra \ -Wno-address-of-packed-member \ -Wfloat-equal -Wmissing-declarations \ -Wno-long-long -Wredundant-decls -Wshadow \ diff --git a/src/lib/src/Makefile.am b/src/lib/src/Makefile.am -index 55c52b41..50efa97a 100644 +index d5d53dd7..76c48d4d 100644 --- a/src/lib/src/Makefile.am +++ b/src/lib/src/Makefile.am -@@ -25,7 +25,7 @@ AM_CPPFLAGS = \ - `pkg-config --silence-errors --cflags json-c` \ - `pkg-config --cflags glib-2.0 gio-2.0` \ +@@ -22,7 +22,7 @@ AM_CPPFLAGS = \ + -I$(top_srcdir)/src/acpica/source/include \ + -I$(top_srcdir)/src/acpica/source/compiler \ -DDATAROOTDIR=\"$(datarootdir)\" \ - -Wall -Werror -Wextra \ + -Wall -Wextra \ @@ -62,7 +62,7 @@ index 55c52b41..50efa97a 100644 pkglib_LTLIBRARIES = libfwts.la diff --git a/src/utilities/Makefile.am b/src/utilities/Makefile.am -index 1fc0fc02..53614e33 100644 +index de38f070..785975ff 100644 --- a/src/utilities/Makefile.am +++ b/src/utilities/Makefile.am @@ -16,7 +16,7 @@ @@ -75,5 +75,5 @@ index 1fc0fc02..53614e33 100644 bin_PROGRAMS = kernelscan -- -2.30.2 +2.36.1 diff --git a/package/fwts/fwts.hash b/package/fwts/fwts.hash index 8634980e03..612bc768dd 100644 --- a/package/fwts/fwts.hash +++ b/package/fwts/fwts.hash @@ -1,5 +1,5 @@ # Hash from: http://fwts.ubuntu.com/release/SHA256SUMS -sha256 17d1f0b9639e0f9b092ed8233be2d63d6c44ea8d2a76be0fb5902cc867961374 fwts-V21.11.00.tar.gz +sha256 fee1c323fb9725c2b99c348c434d63196391cad66566d34b42707e55d14d7f25 fwts-V22.09.00.tar.gz # Hash for license file sha256 fbbea748555635dd8c7e6e2f99cddd778f5ee3f9e3510775183bf9799076e5e5 debian/copyright diff --git a/package/fwts/fwts.mk b/package/fwts/fwts.mk index 6634cdc40e..b208aa0c14 100644 --- a/package/fwts/fwts.mk +++ b/package/fwts/fwts.mk @@ -4,7 +4,7 @@ # ################################################################################ -FWTS_VERSION = 21.11.00 +FWTS_VERSION = 22.09.00 FWTS_SOURCE = fwts-V$(FWTS_VERSION).tar.gz FWTS_SITE = http://fwts.ubuntu.com/release FWTS_STRIP_COMPONENTS = 0 From yann.morin.1998 at free.fr Sat Oct 1 20:57:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:57:22 +0200 Subject: [Buildroot] [PATCH] package/acpica: bump to version 20220331 In-Reply-To: <20220927105752.760729-1-nunes.erico@gmail.com> References: <20220927105752.760729-1-nunes.erico@gmail.com> Message-ID: <20221001205722.GX30794@scaer> Erico, All, On 2022-09-27 12:57 +0200, Erico Nunes spake thusly: > Signed-off-by: Erico Nunes Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/acpica/acpica.hash | 4 ++-- > package/acpica/acpica.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash > index a2fdfe602e..4b6981c602 100644 > --- a/package/acpica/acpica.hash > +++ b/package/acpica/acpica.hash > @@ -1,3 +1,3 @@ > # locally computed hash > -sha256 8a49904744a8159b7f325ed941b56968ba37a0371c634036628064f97538de4b acpica-unix2-20200717.tar.gz > -sha256 cb17c679d3291eba1a70a1336062fb07eec2e839b0821b443b24f41de18c5218 source/include/acpi.h > +sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz > +sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h > diff --git a/package/acpica/acpica.mk b/package/acpica/acpica.mk > index 21ecc155be..9901c1ed48 100644 > --- a/package/acpica/acpica.mk > +++ b/package/acpica/acpica.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -ACPICA_VERSION = 20200717 > +ACPICA_VERSION = 20220331 > ACPICA_SOURCE = acpica-unix2-$(ACPICA_VERSION).tar.gz > ACPICA_SITE = https://acpica.org/sites/acpica/files > ACPICA_LICENSE = BSD-3-Clause or GPL-2.0 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:59:20 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:59:20 +0200 Subject: [Buildroot] [PATCH] package/fwts: bump to version 22.09.00 In-Reply-To: <20220927105817.760742-1-nunes.erico@gmail.com> References: <20220927105817.760742-1-nunes.erico@gmail.com> Message-ID: <20221001205920.GY30794@scaer> Erico, All, +Vincent forr the arm support On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Signed-off-by: Erico Nunes Applied to master, thanks. Note that we recently allowed fwts to be selectable on arm, see commit 6229a31f8d7e (package/fwts: enable for arm), so with this bump we may get new failures. Please keep an eye on the autobuilder results. Regards, Yann E. MORIN. > --- > .../fwts/0001-build-do-not-use-Werror.patch | 26 +++++++++---------- > package/fwts/fwts.hash | 2 +- > package/fwts/fwts.mk | 2 +- > 3 files changed, 15 insertions(+), 15 deletions(-) > > diff --git a/package/fwts/0001-build-do-not-use-Werror.patch b/package/fwts/0001-build-do-not-use-Werror.patch > index 715c4f63a5..c6a84537ed 100644 > --- a/package/fwts/0001-build-do-not-use-Werror.patch > +++ b/package/fwts/0001-build-do-not-use-Werror.patch > @@ -1,4 +1,4 @@ > -From e481c2f990ffa71f205d4b9daf0823e71269a7f3 Mon Sep 17 00:00:00 2001 > +From feb05271b484b158c14611839f968109e9cf3082 Mon Sep 17 00:00:00 2001 > From: Erico Nunes > Date: Fri, 12 Aug 2016 23:11:56 +0200 > Subject: [PATCH] fwts: do not use -Werror > @@ -25,7 +25,7 @@ Signed-off-by: Vincent Stehl? > 4 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/configure.ac b/configure.ac > -index f40c3678..0ff5025b 100644 > +index ca2f54e2..ed584abf 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -1,5 +1,5 @@ > @@ -36,25 +36,25 @@ index f40c3678..0ff5025b 100644 > AC_CANONICAL_HOST > AC_CONFIG_MACRO_DIR([m4]) > diff --git a/src/Makefile.am b/src/Makefile.am > -index cdabb386..7c2e5730 100644 > +index 3bb35e5c..e9fe92fe 100644 > --- a/src/Makefile.am > +++ b/src/Makefile.am > -@@ -12,7 +12,7 @@ AM_CPPFLAGS = \ > - -I$(top_srcdir)/src/acpica/source/compiler \ > +@@ -13,7 +13,7 @@ AM_CPPFLAGS = \ > -I$(top_srcdir)/efi_runtime \ > - -pthread `pkg-config --cflags glib-2.0 gio-2.0` \ > + -I$(top_srcdir)/smccc_test \ > + -pthread \ > - -Wall -Werror -Wextra \ > -+ -Wall -Wextra \ > ++ -Wall -Wextra \ > -Wno-address-of-packed-member \ > -Wfloat-equal -Wmissing-declarations \ > -Wno-long-long -Wredundant-decls -Wshadow \ > diff --git a/src/lib/src/Makefile.am b/src/lib/src/Makefile.am > -index 55c52b41..50efa97a 100644 > +index d5d53dd7..76c48d4d 100644 > --- a/src/lib/src/Makefile.am > +++ b/src/lib/src/Makefile.am > -@@ -25,7 +25,7 @@ AM_CPPFLAGS = \ > - `pkg-config --silence-errors --cflags json-c` \ > - `pkg-config --cflags glib-2.0 gio-2.0` \ > +@@ -22,7 +22,7 @@ AM_CPPFLAGS = \ > + -I$(top_srcdir)/src/acpica/source/include \ > + -I$(top_srcdir)/src/acpica/source/compiler \ > -DDATAROOTDIR=\"$(datarootdir)\" \ > - -Wall -Werror -Wextra \ > + -Wall -Wextra \ > @@ -62,7 +62,7 @@ index 55c52b41..50efa97a 100644 > > pkglib_LTLIBRARIES = libfwts.la > diff --git a/src/utilities/Makefile.am b/src/utilities/Makefile.am > -index 1fc0fc02..53614e33 100644 > +index de38f070..785975ff 100644 > --- a/src/utilities/Makefile.am > +++ b/src/utilities/Makefile.am > @@ -16,7 +16,7 @@ > @@ -75,5 +75,5 @@ index 1fc0fc02..53614e33 100644 > > bin_PROGRAMS = kernelscan > -- > -2.30.2 > +2.36.1 > > diff --git a/package/fwts/fwts.hash b/package/fwts/fwts.hash > index 8634980e03..612bc768dd 100644 > --- a/package/fwts/fwts.hash > +++ b/package/fwts/fwts.hash > @@ -1,5 +1,5 @@ > # Hash from: http://fwts.ubuntu.com/release/SHA256SUMS > -sha256 17d1f0b9639e0f9b092ed8233be2d63d6c44ea8d2a76be0fb5902cc867961374 fwts-V21.11.00.tar.gz > +sha256 fee1c323fb9725c2b99c348c434d63196391cad66566d34b42707e55d14d7f25 fwts-V22.09.00.tar.gz > > # Hash for license file > sha256 fbbea748555635dd8c7e6e2f99cddd778f5ee3f9e3510775183bf9799076e5e5 debian/copyright > diff --git a/package/fwts/fwts.mk b/package/fwts/fwts.mk > index 6634cdc40e..b208aa0c14 100644 > --- a/package/fwts/fwts.mk > +++ b/package/fwts/fwts.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -FWTS_VERSION = 21.11.00 > +FWTS_VERSION = 22.09.00 > FWTS_SOURCE = fwts-V$(FWTS_VERSION).tar.gz > FWTS_SITE = http://fwts.ubuntu.com/release > FWTS_STRIP_COMPONENTS = 0 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sat Oct 1 21:06:15 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:06:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20221001165241.GM30794@scaer> References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> <20221001165241.GM30794@scaer> Message-ID: Hi, Le sam. 1 oct. 2022 ? 18:52, Yann E. MORIN a ?crit : > Fabrice, All, > > On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > > Denial of service attack and buffer overflow against TLS 1.3 > > servers using session ticket resumption. When built with > > --enable-session-ticket and making use of TLS 1.3 server code in > > wolfSSL, there is the possibility of a malicious client to craft a > > malformed second ClientHello packet that causes the server to crash. > > This issue is limited to when using both --enable-session-ticket and TLS > > 1.3 on the server side. Users with TLS 1.3 servers, and having > > --enable-session-ticket, should update to the latest version of wolfSSL. > > I see that we are not explicitly using either --enable or > --disable-session-ticket, so what is the default, and were we impacted? > session-ticket is disabled by default. Moreover, session-ticket is enabled if nginx, wpas, haproxy or lighty is enabled (but all of them are disabled). So, we were not impacted except if the user has explicitly enabled this option in its own tree. > > Also, we should have an explicit setting for that, rather than leave it > to chance. > Why not, but wolfssl has a ton of options, should we also explicitly set them to false even if they are disabled by default? > > > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > > > > Signed-off-by: Fabrice Fontaine > > Applied to master, thanks. > > Regards, > Yann E. MORIN. > > > --- > > package/wolfssl/wolfssl.hash | 2 +- > > package/wolfssl/wolfssl.mk | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash > > index f1401e4cda..3849ffb9fc 100644 > > --- a/package/wolfssl/wolfssl.hash > > +++ b/package/wolfssl/wolfssl.hash > > @@ -1,5 +1,5 @@ > > # Locally computed: > > -sha256 > c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f > wolfssl-5.5.0.tar.gz > > +sha256 > 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 > wolfssl-5.5.1.tar.gz > > > > # Hash for license files: > > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > > diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk > > index ca360312c9..95d4f47952 100644 > > --- a/package/wolfssl/wolfssl.mk > > +++ b/package/wolfssl/wolfssl.mk > > @@ -4,7 +4,7 @@ > > # > > > ################################################################################ > > > > -WOLFSSL_VERSION = 5.5.0 > > +WOLFSSL_VERSION = 5.5.1 > > WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) > > WOLFSSL_INSTALL_STAGING = YES > > > > -- > > 2.35.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' > conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ > | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is > no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v > conspiracy. | > > '------------------------------^-------^------------------^--------------------' > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 1 21:21:14 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:21:14 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 Message-ID: <20221001212114.11912-1-fontaine.fabrice@gmail.com> - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index b1494d7596..abc3100e6d 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 1 21:29:37 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:29:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/xz: bump to version 5.2.7 Message-ID: <20221001212938.25577-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 Signed-off-by: Fabrice Fontaine --- package/xz/xz.hash | 3 +-- package/xz/xz.mk | 6 +----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/package/xz/xz.hash b/package/xz/xz.hash index 9577e98e80..3aa68791fd 100644 --- a/package/xz/xz.hash +++ b/package/xz/xz.hash @@ -1,6 +1,5 @@ # Locally calculated after checking pgp signature -sha256 5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df xz-5.2.5.tar.bz2 -sha256 98c6cb1042284fe704ec30083f3fc87364ce9ed2ea51f62bbb0ee9d3448717ec xzgrep-ZDI-CAN-16587.patch +sha256 b65f1d0c2708e57716f4dd2216989a73847ac6fdb4168ffceb155767e22b834b xz-5.2.7.tar.bz2 # Hash for license files sha256 bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c COPYING diff --git a/package/xz/xz.mk b/package/xz/xz.mk index cdb01e06a9..004eea94b2 100644 --- a/package/xz/xz.mk +++ b/package/xz/xz.mk @@ -4,7 +4,7 @@ # ################################################################################ -XZ_VERSION = 5.2.5 +XZ_VERSION = 5.2.7 XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2 XZ_SITE = https://tukaani.org/xz XZ_INSTALL_STAGING = YES @@ -13,10 +13,6 @@ XZ_LICENSE = Public Domain, GPL-2.0+, GPL-3.0+, LGPL-2.1+ XZ_LICENSE_FILES = COPYING COPYING.GPLv2 COPYING.GPLv3 COPYING.LGPLv2.1 XZ_CPE_ID_VENDOR = tukaani -XZ_PATCH = xzgrep-ZDI-CAN-16587.patch -# xzgrep-ZDI-CAN-16587.patch -XZ_IGNORE_CVES += CVE-2022-1271 - ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) XZ_CONF_OPTS += --enable-threads else -- 2.35.1 From yann.morin.1998 at free.fr Sat Oct 1 21:15:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:15:58 +0200 Subject: [Buildroot] [git commit] package/volk: needs C++17, not boost Message-ID: <20221001213928.61BF486741@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66215faa5237e3704d55ff171537468079dda9c4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since volk 2.5.1, C++17 is required, and no Boost component is used anymore. Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN --- package/volk/Config.in | 9 ++------- package/volk/volk.mk | 2 +- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 95b4a8bdb5..83d58d64ab 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,20 +1,15 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK bool "volk" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() - depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem - select BR2_PACKAGE_BOOST - select BR2_PACKAGE_BOOST_FILESYSTEM - select BR2_PACKAGE_BOOST_SYSTEM help VOLK is the Vector-Optimized Library of Kernels. It is a library that contains kernels of hand-written SIMD code diff --git a/package/volk/volk.mk b/package/volk/volk.mk index e7b004b87f..1b36ea69c8 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -15,7 +15,7 @@ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO # host-python-mako are needed for volk to compile -VOLK_DEPENDENCIES = host-python3 host-python-mako boost +VOLK_DEPENDENCIES = host-python3 host-python-mako VOLK_CONF_OPTS = \ -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ From yann.morin.1998 at free.fr Sat Oct 1 21:37:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:37:32 +0200 Subject: [Buildroot] [git commit] package/volk: bump to version 2.5.2 Message-ID: <20221001213928.75F3586744@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=be14b55e838f2e0f9664b0372b3d9ac00a5a8518 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN --- package/volk/volk.hash | 2 +- package/volk/volk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/volk/volk.hash b/package/volk/volk.hash index 0ec96d22ff..4c62c6d315 100644 --- a/package/volk/volk.hash +++ b/package/volk/volk.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 3f092737006ad2b7d24852833cf040e725c6f47d68ec2f4197895f84c6400bd8 volk-2.5.1.tar.xz +sha256 eff53206cd1ec3314755e0b2bde3c7aaea21dd0f0ad8d753bff07d98e93ddee2 volk-2.5.2.tar.xz sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING sha256 258f450f060a161fb9f9e2e7c07c6b1ee73e5142297e6792dc1ee76b028cf0ca COPYING-LGPL diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 038b85ee86..5e2e50ae73 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -4,7 +4,7 @@ # ################################################################################ -VOLK_VERSION = 2.5.1 +VOLK_VERSION = 2.5.2 VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some From yann.morin.1998 at free.fr Sat Oct 1 21:35:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:35:46 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information Message-ID: <20221001213928.6B43A86743@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0a397fa6381a4115be22ee9637746bf8c8e1194e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the LGPL-3.0+, which is still not completely done 5by some large margin), so it is still covered by the GPL-3.0+, but has parts already covered by the LGPL-3.0+. We so far only listed GPL-3.0+, but we also had the license file for the LGPL-3.0+. Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of the GPL-3.0+, so we already had it listed (note: the package has a COPYING-GPL, but i's a symlink to COPYING). Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: - split out to its own patch - explain why we don't add COPYING-GPL ] Signed-off-by: Yann E. MORIN --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 1b36ea69c8..038b85ee86 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From fontaine.fabrice at gmail.com Sat Oct 1 21:41:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:41:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: bump to version 1.16.1 Message-ID: <20221001214156.37988-1-fontaine.fabrice@gmail.com> Refresh patch https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 Signed-off-by: Fabrice Fontaine --- package/libdnet/0001-python-makefile.patch | 6 ++++-- package/libdnet/libdnet.hash | 2 +- package/libdnet/libdnet.mk | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/libdnet/0001-python-makefile.patch b/package/libdnet/0001-python-makefile.patch index eae22b2f14..e5526482ed 100644 --- a/package/libdnet/0001-python-makefile.patch +++ b/package/libdnet/0001-python-makefile.patch @@ -6,6 +6,8 @@ Subject: [PATCH] python makefile Signed-off-by: Peter Korsgaard [adam: refresh for 1.14; make it git-formatted] Signed-off-by: Adam Duskett +[Fabrice: updated for 1.16.1] +Signed-off-by: Fabrice Fontaine --- python/Makefile.am | 1 + 1 file changed, 1 insertion(+) @@ -15,9 +17,9 @@ index 1a74ef2..59fe0f3 100644 --- a/python/Makefile.am +++ b/python/Makefile.am @@ -11,6 +11,7 @@ $(srcdir)/dnet.c: $(srcdir)/dnet.pyx - pyrexc $(srcdir)/dnet.pyx - python-build: $(srcdir)/dnet.c + + python-build: + CC="$(CC)" LDSHARED="$(CC) -shared" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" $(PYTHON) setup.py build_ext -I$(PYINCDIR) -L$(PYLIBDIR) $(PYTHON) setup.py build touch python-build diff --git a/package/libdnet/libdnet.hash b/package/libdnet/libdnet.hash index d322a1cc29..c31ec90596 100644 --- a/package/libdnet/libdnet.hash +++ b/package/libdnet/libdnet.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 592599c54a57102a177270f3a2caabda2c2ac7768b977d7458feba97da923dfe libdnet-1.14.tar.gz +sha256 b151c4913758ef80daf4558361b4f2680a37b01d59272625bb78c77183062c63 libdnet-1.16.1.tar.gz sha256 6b46ec86e290066c47b6607d322135b3c473566e7225ac23d35a7c0588a82da6 LICENSE diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 4c58ea20a5..1e75dae323 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDNET_VERSION = 1.14 +LIBDNET_VERSION = 1.16.1 LIBDNET_SITE = $(call github,ofalk,libdnet,libdnet-$(LIBDNET_VERSION)) LIBDNET_LICENSE = BSD-3-Clause LIBDNET_LICENSE_FILES = LICENSE -- 2.35.1 From yann.morin.1998 at free.fr Sat Oct 1 21:41:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:41:57 +0200 Subject: [Buildroot] [PATCH] package/volk: bump version to 2.5.2 In-Reply-To: <1664265949-22692-1-git-send-email-gwenj@trabucayre.com> References: <1664265949-22692-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221001214157.GZ30794@scaer> Gwenhael, All, On 2022-09-27 10:05 +0200, Gwenhael Goavec-Merou spake thusly: > From: Gwenhael Goavec-Merou > > - with this release boost has been dropped: all select BR2_PACKAGE_BOOST_XXX > are removed > - volk now uses functions only available with c++17: adds a depends on for > gcc > 7.0 > - COPYING-GPL is added to volk.hash > - VOLK_LICENSE is updated with LGPL-3.0+ In fact, the licensing and boost and C++17 changes were already present in the 2.5.2 version, so I've split this patch in three: - drop Boost, require C++17 - fix licensing - bump to 2.5.2 Pleas review the licensing changes, I did quite some substantial rewrites of the corresponding commit log. The three resulting patches: applied to master, thanks. Regards, Yann E. MORIN. > Signed-off-by: Gwenhael Goavec-Merou > --- > package/volk/Config.in | 9 ++------- > package/volk/volk.hash | 3 ++- > package/volk/volk.mk | 8 ++++---- > 3 files changed, 8 insertions(+), 12 deletions(-) > > diff --git a/package/volk/Config.in b/package/volk/Config.in > index 95b4a8bdb5..83d58d64ab 100644 > --- a/package/volk/Config.in > +++ b/package/volk/Config.in > @@ -1,20 +1,15 @@ > comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" > depends on BR2_USE_MMU > - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS > - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ > + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ > !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS > > config BR2_PACKAGE_VOLK > bool "volk" > depends on BR2_INSTALL_LIBSTDCPP > depends on !BR2_STATIC_LIBS > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 > depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL > depends on BR2_USE_MMU # use fork() > - depends on BR2_USE_WCHAR # boost > - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem > - select BR2_PACKAGE_BOOST > - select BR2_PACKAGE_BOOST_FILESYSTEM > - select BR2_PACKAGE_BOOST_SYSTEM > help > VOLK is the Vector-Optimized Library of Kernels. It is a > library that contains kernels of hand-written SIMD code > diff --git a/package/volk/volk.hash b/package/volk/volk.hash > index 0ec96d22ff..b334a7613b 100644 > --- a/package/volk/volk.hash > +++ b/package/volk/volk.hash > @@ -1,4 +1,5 @@ > # Locally computed > -sha256 3f092737006ad2b7d24852833cf040e725c6f47d68ec2f4197895f84c6400bd8 volk-2.5.1.tar.xz > +sha256 eff53206cd1ec3314755e0b2bde3c7aaea21dd0f0ad8d753bff07d98e93ddee2 volk-2.5.2.tar.xz > sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING > +sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING-GPL > sha256 258f450f060a161fb9f9e2e7c07c6b1ee73e5142297e6792dc1ee76b028cf0ca COPYING-LGPL > diff --git a/package/volk/volk.mk b/package/volk/volk.mk > index e7b004b87f..571a5477b1 100644 > --- a/package/volk/volk.mk > +++ b/package/volk/volk.mk > @@ -4,18 +4,18 @@ > # > ################################################################################ > > -VOLK_VERSION = 2.5.1 > +VOLK_VERSION = 2.5.2 > VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) > VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz > # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some > # details on the licensing. > -VOLK_LICENSE = GPL-3.0+ > -VOLK_LICENSE_FILES = COPYING COPYING-LGPL > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ > +VOLK_LICENSE_FILES = COPYING COPYING-GPL COPYING-LGPL > > VOLK_SUPPORTS_IN_SOURCE_BUILD = NO > > # host-python-mako are needed for volk to compile > -VOLK_DEPENDENCIES = host-python3 host-python-mako boost > +VOLK_DEPENDENCIES = host-python3 host-python-mako > > VOLK_CONF_OPTS = \ > -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sat Oct 1 22:22:54 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 1 Oct 2022 16:22:54 -0600 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error Message-ID: <20221001222254.142279-1-james.hilliard1@gmail.com> Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK -- 2.34.1 From judge.packham at gmail.com Sun Oct 2 00:49:30 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 2 Oct 2022 13:49:30 +1300 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 Message-ID: <20221002004931.1805825-1-judge.packham@gmail.com> This is a bug fix release. The changes are: - extmod/machine_i2c: only use WRITE1 option if transfer supports it This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it writes the address to read from. Signed-off-by: Chris Packham --- package/micropython/micropython.hash | 2 +- package/micropython/micropython.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/micropython/micropython.hash b/package/micropython/micropython.hash index 09bc574ebc..7bff7de4e2 100644 --- a/package/micropython/micropython.hash +++ b/package/micropython/micropython.hash @@ -1,3 +1,3 @@ #locally computed -sha256 128b6fb13b518b4d3e75b4f0c04f175dc336c762d8c6360f647e91dc4d25e5d0 micropython-1.19.tar.gz +sha256 c980ad7e742491df0dc10db2958137dbbf9aa7a8009e102fc75f4c0cac2d6b5e micropython-1.19.1.tar.gz sha256 0f678c2abd7fe2cfca36693630506bbcbdfc219bd04bf4a02fe3b094ae4c666f LICENSE diff --git a/package/micropython/micropython.mk b/package/micropython/micropython.mk index f7af9bfc32..51b45e5e99 100644 --- a/package/micropython/micropython.mk +++ b/package/micropython/micropython.mk @@ -4,7 +4,7 @@ # ################################################################################ -MICROPYTHON_VERSION = 1.19 +MICROPYTHON_VERSION = 1.19.1 MICROPYTHON_SITE = $(call github,micropython,micropython,v$(MICROPYTHON_VERSION)) # Micropython has a lot of code copied from other projects, and also a number # of submodules for various libs. However, we don't even clone the submodules, -- 2.37.3 From judge.packham at gmail.com Sun Oct 2 00:49:31 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 2 Oct 2022 13:49:31 +1300 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221002004931.1805825-1-judge.packham@gmail.com> References: <20221002004931.1805825-1-judge.packham@gmail.com> Message-ID: <20221002004931.1805825-2-judge.packham@gmail.com> Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham --- ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 3 files changed, 3 insertions(+), 88 deletions(-) delete mode 100644 package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt -- 2.37.3 From buildroot at athaariq.my.id Sun Oct 2 03:33:09 2022 From: buildroot at athaariq.my.id (buildroot at athaariq.my.id) Date: Sun, 02 Oct 2022 03:33:09 +0000 (UTC) Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> <20221001155615.GA30794@scaer> <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> Message-ID: <8c42038a335a0122dee3365ce1940920@athaariq.my.id> Hello Mr. Morrin, > This issue is really weird, because the glibc commit we are using is > supposed to contain the related fixes Pardon me for being so weird. What I'm trying to fix is this error: ``` /builds/buildroot.org/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/linux/mount.h:92:6: error: multiple definition of ?enum fsconfig_command? 92 | enum fsconfig_command { | ^~~~~~~~~~~~~~~~ In file included from ../../../../libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cpp:62: /builds/buildroot.org/buildroot/output/build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h:249:6: note: previous definition here 249 | enum fsconfig_command | ^~~~~~~~~~~~~~~~ ``` I did spent entire morning last two days ago and I figured out that no matter how do I detect linux/mount.h presence in "sys/mount.h", **enum fsconfig_command** still in clash between linux-headers and glibc. However, the problem only exist in glibc v2.36 whereas no effect when I changed linux version. Thus, linux-headers seems to be declared after glibc. > How is this a buildroot-specific bug? Can you elaborate on that part? > If > it is really a buildroot-related bug, then we want to understand it, > and > fix it, not work around it. Because it successfully compiled in Gentoo but failed when compile Buildroot for Raspberry Pi 4 and Raspberry Pi 3, with default configuration. The reason why I asked "Is this possible on Buildroot?" is to give you two options: 1. If possible, let's make sure linux-headers installed before glibc 2. If not, let's workaround for a while until there's a revelation from upstream > This is exactly what we are doing already, and for as long as Buildroot > has supported building a glibc-ased toolchain, as the kernel headers > are > required to build glibc; see package/glibc/glibc.mk at 28: Well that's interesting. Wonder why that enum redeclaration error exist and my last patch actually works. > To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc > 2.36 commit, and even one older than ours, but they do not seem to have > issues. Honestly, I only tested it on my Raspberry Pi 4 and my friend's Raspberry Pi 3 with latest origin/master and default configuration. Yesterday, I realized that all raspberry boards are symlinked into one directory after checked autobuild. Perhaps, board specific issue? If correct, I'm going to patch the custom kernel instead, plus bump it. I also noticed Raspberry Pi boards are marked ORPH at autobuild. Is that means orphan? If yes, I would gladly contribute as board maintainer. Thank you for your cooperation. Regards, Athaariq Ardhiansyah NB: My nickname is Eric From thomas.petazzoni at bootlin.com Sun Oct 2 06:32:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 02 Oct 2022 06:32:33 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-01 Message-ID: <20221002063238.467C5400EA@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-01 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 2 | 0 | 4 | 2022.05.x | 22 | 12 | 0 | 34 | 2022.08.x | 3 | 0 | 0 | 3 | master | 65 | 162 | 0 | 227 | Classification of failures by reason for master ----------------------------------------------- systemd-250.4 | 9 crun-1.5 | 8 glibc-2.36-44-g2628500f5dff... | 8 sysvinit-2.99 | 7 unknown | 7 autofs-5.1.8 | 6 btrfs-progs-5.16.2 | 5 host-pahole-73383b3a39afe86... | 5 host-sentry-cli-1.59.0 | 5 igd2-for-linux-2.1 | 5 gerbera-1.10.0 | 4 host-binutils-2.39 | 4 google-breakpad-c85eb4a59b6... | 3 host-spirv-llvm-translator-... | 3 linux-5.17.15 | 3 ltp-testsuite-20220527 | 3 coreutils-9.1 | 2 dahdi-linux-5c840cf43838e06... | 2 dash-0.5.11.5 | 2 elfutils-0.186 | 2 gensio-2.5.2 | 2 hdparm-9.63 | 2 host-binutils-2.38 | 2 host-gcc-final-11.3.0 | 2 host-go-1.19.1 | 2 libarchive-3.6.1 | 2 libglib2-2.72.3 | 2 libtorrent-rasterbar-1.2.15 | 2 linux-5.10.109-cip5-rt4 | 2 musl-1.2.3 | 2 open62541-v1.3.3 | 2 quickjs-2021-03-27 | 2 ulog-0389d243352255f6182326... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 assimp-5.2.1 | 1 boost-1.80.0 | 1 brltty-6.4 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 crucible-2022.05.25 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 frr-8.3.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gdal-3.5.1 | 1 gensio-2.5.5 | 1 gmp-6.2.1 | 1 grep-3.7 | 1 host-flex-2.6.4 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-arc-2020.0... | 1 host-moby-buildkit-0.10.0 | 1 host-rust-1.64.0 | 1 igh-ethercat-1.5.2 | 1 libdcadec-0.2.0 | 1 libqb-2.0.6 | 1 libuci-4b3db1179747b6a67790... | 1 libzip-1.9.2 | 1 libzlib-1.2.12 | 1 make: *** Waiting for unfin... | 1 p11-kit-0.24.1 | 1 pcre-8.45 | 1 perl-5.34.1 | 1 php-8.1.9 | 1 proj-8.1.1 | 1 python-ujson-5.2.0 | 1 rhash-1.4.3 | 1 tealdeer-1.5.0 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 wavemon-0.9.4 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/78433fa816d089daef58dde84bc38de55f8c6a36 | nios2 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b7a0638e6bcaa10c4f4d111bebcc51d5dab43dd8 | x86_64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a00652077b4237081564d100e86d78a1c8d09b7c | nios2 | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/f9db16f76c3e10e40ab5090a32032916b2ca555a | ORPH mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2e4af83beb02716c956012045e85ab2ebe5834c2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/76bd0d64081631364daad90f490d61c65b58a929 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/64c2d8b8111f6dbb58862d9e1f5d5def0f10fc09 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/894e473185ec6c55d9f9f8696208ab4213e7c6a9 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a24ded9ed7282e8b32e96f14c93ff9954a724530 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/c5a36a28465b7cf64d3c39104b86983e3563e8af | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/b8fab151d77969e6350dbf3f345f33a90cdeeee9 | mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/49de49349f3670c2357c56fada181ab3fa546f88 | microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dca54eaf9956e98d08c23fc5a6f1f46a42fc4b7a | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b5b15ea1fc61be23d073d342ead863afd04ce008 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e93e0b40baf52c169dad2c59dcfd3ff838767772 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2a16a7b086a38a7bb2c9f75a8715b6aa7cbe53f8 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/34785ce812b49e37abd94c20b684e3abdce5aafe | ORPH s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4496fb3fb0a7b08636e3efd4fd536add46be371d | powerpc64 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/680ad1ed95f7a7522029c55f49a53c9859204cd2 | ORPH sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/b7e56b951addb26845a8ef258a9b55aa99232b09 | ORPH sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/2630ad3ecd6c9fc9bca20de4cee6c6f5b3e2f9db | ORPH i686 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/c6cc040face2cf8917865ab36407c5f6e1f8ba60 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cfe5fe4dbc3bfa97a5e560691ff40c135378bbe9 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4920d7e113d0647a37f0cc8e3999cf54522cc78f | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2ea89ba9d0a3d6bcc011985618e763e6ea45f27c | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/708417bc525c5267759951272c2a4f2b5ce327c4 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5f775ac92242a2a863ac6d40f4f2edf7ebf7fab7 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/944c54e684d40778da72d909403245f4bbd0b291 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b126ce1d01827d960ed0d4c5d45b05321519187e | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f0fe35e76ac95c10658c8d27c89cca63fd927f22 | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5eec218c62fbf6629ced4fc9537e4fa93f84678e | microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f9237df67add2cfab356714863e12b2b28997464 | sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/39edaa92f25fe5028110caed2fe8a37f00c5991f | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/4b05c8e326fc41ed2b67d08c4fb2054184482200 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/cdda3f5cc86eb390c2afe1ea06977d63807d990f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4baedb0d0b9f289b8c99d94b8b2fae5e4b41748c | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/de5f5fdbd4340abc7e7a6a3a6b9c6be36d04533b | ORPH i686 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/908d56d239a6df1e369ed86f5092c8a25985658c | mips | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/4a0b4eadfc19aae05f69ec78621b49e77e308c53 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/054acff406bd2219695fe56912f7d8570c0af9d3 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/9e10618870229ee847877f14e7f6ce4b93ed217c | microblazeel | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/99f55319d7a4476ee7376fa3b26f5039da855d85 | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/0a1b502514ee2671d96e205a18287a582758176d | armeb | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/e4ac33043ee6d63918b75405e0355894ea93af49 | x86_64 | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/df4074d47f3a12640ec332420a7b7f6820f61e29 | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5903f917eec509db61a94e1976cee7e2c29fb371 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b004d36b743caf35ac19f0892e0f3876b6f96597 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/947e9df787e2c7561a2e7899bff130d5cc6c5af7 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/00de85570d9e03e537a089945db2f3ab99b8aeb5 | xtensa | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5cc2cd19d7fa4eaf5b5419d65e3f788355fb1dbe | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbf51ce8a66f1740865b5f244d84c96a06158c12 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65da2981532a9471a87cb4d53fb6c700f1d56d6c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ca519ae2e0e9f60295dc9ca097ca90c535b3953 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/deb86d5cb1a4baaaacee11f10da649922ce9b9aa | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab2eaa35733ef38d94514728bbce54ddcffbccf9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d5fdc68b4b7d110a0627162f61cb97cecfa697b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a022ce3f36485ebdd35c373742893ada09a2a1b | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1b358ed4bd6feaa7313b00f29e50dd417f1d083 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/191f95360270e3f9c372e0dcdd498f6e73116606 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/8fad09c37f1983ee6513693489597f59e5ea35cd | arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/eaaaf658179a0b80c394e3950e2210e102aae4dc | arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/9922999cc790fe55a4c5ae30e652dbc5aa1c8c5c | powerpc | grep-3.7 | NOK | http://autobuild.buildroot.net/results/98a1649fe41ef7d7b9604cb304624d43718acd43 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/4a15aba80238c6faf9266c8aaf1282762af09687 | mips | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/8781115a93dd2b9bc416435210e2deae5627a258 | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/690893b6059841fba0873f1561e2aefec5c5dab7 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2efd3b5a6843e3392bf1f938a3a2678e481e40cf | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/488c1b4b0db3f80d47dd7adb659d52e79bb43f52 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/777bef8d9b06ea2fb92c5b7634e05cbb6c187203 | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f1e39e6abd2f2c13a4f7c885168b301caf642cfb | aarch64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/19befb943c64d3b3efb12faa08499100960eda76 | microblaze | host-flex-2.6.4 | NOK | http://autobuild.buildroot.net/results/55599ec38cc6c7331f984410f2276415a99fee97 | ORPH i686 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/3fd437f269bf4ce25f6e2bcbc48d066c15fb7df2 | powerpc64le | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/9d1bfd18a3bd35d892da49b28968df488dfee7c3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5fafa5cc7612bd07f1b69b33f2ddce51491df9c | arceb | host-gcc-initial-arc-2020.0... | NOK | http://autobuild.buildroot.net/results/0177a3ae3ffe74cb17b563dbe395a5b73048f85e | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f69f3463790fe1bdba0548b820b1f595d31d8a62 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/4351dae9b7dd832385ce2168465b2bc28521d44c | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/28b9d8658623e68909d3886f198714a6006b9bde | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/6add4db41f23d31381a19f3492a0389c2857ec51 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8d2d15c0a67cf16a0dd3d5db6a67e438295a1a11 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f70dea4694817ac83c4dd9364808fd0a3eb6f4a7 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74ee8c6d5f1f4d281ab3af262bf74956d9f9eced | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e5ac7d6c5d31876d3b129df1efe48576dc67572f | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/30ed5984876885679be166af43c8f155f607975f | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/609a2bbc379a738ecfae3d4def39e3dbdac7895e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/42526b17aa8f5da6f6045eddc88270e819eb2f91 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/411fda12f71a6dc23e3072d990d4d966859efab6 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b964629c7d3f2893a7cc4aa5b2cc4150ec48e72 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bdcb0c6db801a655b9f0cdff718bf7c4a6c68351 | riscv64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/0373ad884aa9988d986b3e838ecf10ac02fffed4 | ORPH riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/003df37b095dcabfae0d7af6a7d7c085b1280175 | ORPH aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/c866d1f3fef7542b3f6b65b50db7a33dc31c85d8 | ORPH sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8ceca17239fdf05c737ebf694d65d0147a30191c | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e77899390ede54570bd2b48c876de0a7110649e9 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/31737027adcef6b4e3f0dbb9884cdddca6e9af30 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/48fe1a7f37490fc97ad359b6deb7196c0107f03f | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/23d89e0a739f7c066288c06b0c69f887e822dc8c | powerpc64le | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/7f17dbdcb33cee2bef5036f2693c978ef32b63bb | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4996b6e2ad5d54d335ef1f03c1d6a6ea6606e113 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e39a47942f0e3814069922fd45db39f254d72f9f | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/975675a3a22fff9b1565ef61e3c5814b0e404fdf | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/21a337d395999d964d9899ad7bf5eca7414cf34f | armeb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/51ad3269272304fe6cab6abe29268ed95eb52b96 | riscv64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/a1c934679633073f9d9ea5b7d869dac33354ed97 | sh4aeb | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/7b2039b01960123350f7e646b937f0f77393cfdd | microblaze | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/dee4311bda84638b1630111256536f1f613611ff | mipsel | libuci-4b3db1179747b6a67790... | NOK | http://autobuild.buildroot.net/results/bbf723ad014429cc5670bb5ae98e726fc8809e50 | arc | libzip-1.9.2 | NOK | http://autobuild.buildroot.net/results/429d1d28d70ea5286bb84a3f30309a7a01c9d1d3 | mips64 | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/2e6f94b4b3183fc6f7bd0c6d4a72a3b825904317 | ORPH riscv32 | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/fec3aa809f26de8dd1dc62f2db3a7d77d02c567c | ORPH mips64el | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/42522afb83020a33f851b8ec5f49635587fe6fa7 | ORPH armeb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/5effbe7a1810f58d5d43291d048cdad1288b88c5 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/bef2c1bd4861acafa46c88f45098e5bdbb1ee215 | ORPH m68k | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/f9e4360b874cf2fc70d18df0515dc4557bba791f | ORPH arm | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/4a3a08ccce5231eb60240570ac2e25b4c5d0ab42 | sparc64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/61ebd609c774a2c6c284e75f611405ff923dea35 | sparc64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/e3cc6e3e9d6799181d516bcc037f626240663465 | microblaze | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/42bb86cb112a82ad4ad69421ada234bc6117b95a | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b13472d307b95e025ebef8b461d197cac812edca | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/82bf5f390b7288f3aafbf25867949e28e5585835 | sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/32e5515272da0dccc0d4595afe16743102de8889 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/79c4c8de677f5d4bb65a46eaa567614c6a4c77c6 | ORPH or1k | p11-kit-0.24.1 | NOK | http://autobuild.buildroot.net/results/9ed3c3bfef3ff1eae470d778f748481d4392fda2 | ORPH powerpc64le | pcre-8.45 | NOK | http://autobuild.buildroot.net/results/9583be612aa0e3e0f5fb1d61f062b5e8a216ba7f | ORPH m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/13721b9c65b62cbb0c9d5af940276a3a3bbbb59d | microblazeel | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/e4ce0ad75d6d4aed68c8f9e3cbd6e7b7d6baff1c | or1k | proj-8.1.1 | NOK | http://autobuild.buildroot.net/results/56b38437995abffb6a6db3410018f7bb67666bb9 | arc | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/9f567ba0ffbea97c2458e6c61593c16c7669b3d0 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/c997c76d94dde78f727e5da0d45349a48df49077 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/56d7b6fbf5d654c16b4441d7c6549d589b3793d6 | aarch64 | rhash-1.4.3 | NOK | http://autobuild.buildroot.net/results/7ca7c25d112dfd0097ee84ac5029fb620f395e32 | ORPH sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/94813d7b2cf0df5a94ff828374366e0bf414e5be | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0cf4d783f938543cd380d69525a144e8b2ba612c | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a751cde3f593f5e28afef1c7a5410189e95a5160 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/98e61176460e66bf3aa951bf32b0bb43ee3853d3 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae89cafc1c0922e8949275cc07aa889a89ab9cc8 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/14b10ffeb5dcf162bb4f580310736c1e9d578c86 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cfb535912b1722fb4873cadb037b92d068a63a2e | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/25358774aa15658b3c0e564fe362b0b18177f083 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bca710a8ded22dc552fb0355c9450672eff368c1 | nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/681f327a4dd116d58a2c38d1ad721345e96e2f99 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/239e99fe5b97653d8a4a1f0b4e588cfb2ad0493e | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7ce853bc69304513854209d400e2705b7f0a7cfc | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2dc61ed11b64000d0cb32ac1f848e17ab77cb92a | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/31561022a982509b1641efe86b8f32fdead43da4 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f69897ba7bc9dcc947ff8823c5018fa9c0473455 | ORPH i486 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/50a953a232e621f8508275771ae1e00190532878 | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/aaa806b84de82f32b3b25af9b2d8ba2b98aa1b6e | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/af61755503000c0e81763cf7d76f81b4635b9c18 | sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/38eaa706ffea3d50c877e7987f5a6a1e0090c321 | m68k | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/6d0b126125ffc59b1bbef5fd03bd493308361f66 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/ff72c88b55033c79b064d3ad5bb4e0c9084a0e09 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/eee055d3aad3da35b293deff10e1765ae2ebac6f | m68k | unknown | NOK | http://autobuild.buildroot.net/results/40188dc961698198cee9f1a86442aa84c6b9c1a1 | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/24a2b06343ccdfa10e8e3d504d1354b817a2aea7 | arm | unknown | NOK | http://autobuild.buildroot.net/results/3b650c7ca165c31f55e14e329ca07a127b8a2bc7 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/d597ae77ebc63006be2d5de760752440fcc09aca | i686 | unknown | NOK | http://autobuild.buildroot.net/results/c9400c0ce08237e6f1173c72e0de1f2da8e052f0 | microblazeel | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/e5bd8f968fe75449ab512e6e5b0fbe994a2e6572 | ORPH sparc | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/53f554eae6266df5046341e130c87d1601b6a985 | ORPH sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/fe85f0c829e399a31da46994815126a97fb6dfcf | Classification of failures by reason for 2022.02.x -------------------------------------------------- qt5webkit-5.212.0-alpha4 | 1 weston-10.0.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/2ca7ca0a46b57a79fa553e72dec2643f5458a143 | arm | weston-10.0.1 | NOK | http://autobuild.buildroot.net/results/9f0545fd09ca080249b8e15e5a23eb32f5c5fada | Classification of failures by reason for 2022.05.x -------------------------------------------------- frr-8.2.2 | 2 graphicsmagick-1.3.37 | 2 host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 host-elf2flt-2021.08 | 1 libglib2-2.70.4 | 1 moby-buildkit-0.10.0 | 1 uclibc-1.0.41 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arceb | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/6f229439103565dcf6e4722066bd94873b0c419f | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/947765ab11ae354061a0f02a9eaee406ca3a68d2 | armeb | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/f2eafe5832fc3700afccede085a45b5c2086ad18 | powerpc64 | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/6044ac190ddfeea1cd3f3728382c357698782a61 | riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/0e709b93fd4c2d4f3983e500271ee6470256dd2c | ORPH mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a2636ff71962f6b0a78bb9ee38c8993d27db4f44 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/26b41fdda69379840b66619117edd04db84272c7 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/543471d13f2fb4e2f0f2d59252f3f4bf3cdf2359 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9a9dbaec40e0617ea6e9645d8fcba811c8e264c4 | arc | libglib2-2.70.4 | NOK | http://autobuild.buildroot.net/results/c9f20a8464de74af34ab9882162dd17d5a7ac72d | s390x | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/5922290c6dd405f5fa00b344029ce23c72b7b46b | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/9e24e2afd6dc6a7e9e333d09066174fc96bded22 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 2 07:10:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:10:11 +0200 Subject: [Buildroot] [git commit] package/volk: fix Config.in syntax error Message-ID: <20221002071042.16282866F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d395f49acf5222558601eb6d8300248bf7931051 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK From yann.morin.1998 at free.fr Sun Oct 2 07:11:16 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:11:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error In-Reply-To: <20221001222254.142279-1-james.hilliard1@gmail.com> References: <20221001222254.142279-1-james.hilliard1@gmail.com> Message-ID: <20221002071116.GA30794@scaer> James, All, On 2022-10-01 16:22 -0600, James Hilliard spake thusly: > Fixes: > package/volk/Config.in:4: syntax error > package/volk/Config.in:3: invalid option > > Signed-off-by: James Hilliard Applied to master, thanks for fixing my mess! Regards, Yann E. MORIN. > --- > package/volk/Config.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/volk/Config.in b/package/volk/Config.in > index 83d58d64ab..6a343e0751 100644 > --- a/package/volk/Config.in > +++ b/package/volk/Config.in > @@ -1,6 +1,6 @@ > comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" > depends on BR2_USE_MMU > - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ > + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ > !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS > > config BR2_PACKAGE_VOLK > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 2 07:40:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:40:28 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <8c42038a335a0122dee3365ce1940920@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> <20221001155615.GA30794@scaer> <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> <8c42038a335a0122dee3365ce1940920@athaariq.my.id> Message-ID: <20221002074028.GB30794@scaer> Athaariq, Al, On 2022-10-02 03:33 +0000, buildroot at athaariq.my.id spake thusly: > >This issue is really weird, because the glibc commit we are using is > >supposed to contain the related fixes > Pardon me for being so weird. You are not being weird, no worries. > What I'm trying to fix is this error: > error: multiple definition of ?enum fsconfig_command? Yes, we are aware of that issue. > I did spent entire morning last two days ago and I figured out that no > matter how do I detect linux/mount.h presence in "sys/mount.h", **enum > fsconfig_command** still in clash between linux-headers and glibc. However, > the problem only exist in glibc v2.36 whereas no effect when I changed linux > version. Thus, linux-headers seems to be declared after glibc. When you change the linux headers version in Buildroot, you need to restart from a clean state, i.e. run "make clean" before resuming the build, see the full explanations in the manual: https://buildroot.org/downloads/manual/manual.html#full-rebuild > >How is this a buildroot-specific bug? Can you elaborate on that part? If > >it is really a buildroot-related bug, then we want to understand it, and > >fix it, not work around it. > > Because it successfully compiled in Gentoo but failed when compile Buildroot > for Raspberry Pi 4 and Raspberry Pi 3, with default configuration. The > reason why I asked "Is this possible on Buildroot?" is to give you two > options: > 1. If possible, let's make sure linux-headers installed before glibc > 2. If not, let's workaround for a while until there's a revelation from > upstream > > >This is exactly what we are doing already, and for as long as Buildroot > >has supported building a glibc-ased toolchain, as the kernel headers are > >required to build glibc; see package/glibc/glibc.mk at 28: > > Well that's interesting. Wonder why that enum redeclaration error exist and > my last patch actually works. Yes, we really need to understand why it is broken in the first place, to evaluate whether your patch is correct, or whether we should change the way we do things in Buildroot. Hint: I think we do something in Buildroot that is wrong (or has become wrong as time passed), but we could not pinpoint it yet... > >To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc > >2.36 commit, and even one older than ours, but they do not seem to have > >issues. > > Honestly, I only tested it on my Raspberry Pi 4 and my friend's Raspberry Pi > 3 with latest origin/master and default configuration. Yesterday, I realized > that all raspberry boards are symlinked into one directory after checked > autobuild. Perhaps, board specific issue? If correct, I'm going to patch the > custom kernel instead, plus bump it. It is not specific to the raspberrypi, we have tons of builds failing on various architectures: http://autobuild.buildroot.net/?reason=glibc-2.36-% > I also noticed Raspberry Pi boards are marked ORPH at autobuild. Is that > means orphan? If yes, I would gladly contribute as board maintainer. Thank > you for your cooperation. Weird, as we already have two persons registered for the rpi series: $ ./utils/get-developers -f configs/raspberrypi* board/raspberrypi/ Julien Grossholtz Martin Bark But if you want to be added to that list, do not hesitate to send a patch against the DEVELOPERS file to add yourself. > NB: My nickname is Eric Erics are everywhere! :-) Is that what you want to be adressed by, or should we go with Athaariq? Regards, Yann E. MORIN. > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From guillaume.bressaix at gmail.com Sun Oct 2 08:26:51 2022 From: guillaume.bressaix at gmail.com (Guillaume W. Bres) Date: Sun, 2 Oct 2022 10:26:51 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/python-scipy: bump version to 1.9.1 Message-ID: <20221002082651.29673-1-guillaume.bressaix@gmail.com> scipy.tar.xz is no longer released. A new "python.h" missing header build time failure arised, it is fixed with a new -I cflag. New runtime/linking errors appeared on architectures that need libatomic, an -latomic linker flag solves them Signed-off-by: Guillaume W. Bres --- Scipy is expected to move to a meson build infrastructure by the next release Once 1.9.2 is out, we know we already have my V3-1.9.1 patch serie that builds "fine" with meson, it involved a minor tweak (hopefuly solved by this time). The test script no longer did pass though, this serie is not 100% ready to go --- package/python-scipy/python-scipy.hash | 2 +- package/python-scipy/python-scipy.mk | 13 +++++++++++-- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/package/python-scipy/python-scipy.hash b/package/python-scipy/python-scipy.hash index 0274679c43..1ba239aabf 100644 --- a/package/python-scipy/python-scipy.hash +++ b/package/python-scipy/python-scipy.hash @@ -1,5 +1,5 @@ # Locally generated -sha256 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 scipy-1.8.1.tar.xz +sha256 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 scipy-1.9.1.tar.gz sha256 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c LICENSE.txt sha256 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 scipy/linalg/src/lapack_deprecations/LICENSE sha256 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 scipy/ndimage/LICENSE.txt diff --git a/package/python-scipy/python-scipy.mk b/package/python-scipy/python-scipy.mk index a8c23c6c88..d45b14c4fa 100644 --- a/package/python-scipy/python-scipy.mk +++ b/package/python-scipy/python-scipy.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_SCIPY_VERSION = 1.8.1 -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz +PYTHON_SCIPY_VERSION = 1.9.1 +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz PYTHON_SCIPY_SITE = https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) PYTHON_SCIPY_LICENSE = \ BSD-3-Clause, \ @@ -36,14 +36,23 @@ PYTHON_SCIPY_INSTALL_STAGING = YES PYTHON_SCIPY_SETUP_TYPE = setuptools PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 +PYTHON_SCIPY_CFLAGS = \ + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ -L$(PYTHON3_PATH)/site-packages/numpy/core/lib # -lnpyrandom localization PYTHON_SCIPY_LDFLAGS += \ -L$(STAGING_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/numpy/random/lib +# scipy can use C++11 atomics when available, so we need to link with +# libatomic for the architectures that need libatomic. +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +PYTHON_SCIPY_LDFLAGS += -latomic +endif + PYTHON_SCIPY_ENV = \ F90=$(TARGET_FC) \ + CFLAGS="$(PYTHON_SCIPY_CFLAGS)" \ LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" # Provide system configuration options to numpy distutils extensions, telling -- 2.20.1 From guillaume.bressaix at gmail.com Sun Oct 2 08:37:55 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 2 Oct 2022 10:37:55 +0200 Subject: [Buildroot] [RESEND v1 1/1] package/python-scipy: bump version to 1.9.1 In-Reply-To: <20221001181938.GO30794@scaer> References: <20220928193437.13407-1-guillaume.bressaix@gmail.com> <20221001181938.GO30794@scaer> Message-ID: Thank you Yann for the needed feedback. I see most of my submissions as drafts that need one. For instance, I hesitate a lot about what should remain in the commit log or not. Same thing applies to the -latomic flag, which I knew solved my use case, but I could not find a package to find similar requirements. Your input is always valued, thank you Guillaume W. Bres Software engineer Le sam. 1 oct. 2022 ? 20:19, Yann E. MORIN a ?crit : > Guillaume, All, > > On 2022-09-28 21:34 +0200, Guillaume W. Bres spake thusly: > > Signed-off-by: Guillaume W. Bres > > --- > > All that is below the triple-dash line will be dropped by git when we > apply the patch. However, you provided interesting information in that > post-commit-log message... > > > Scipy is expected to move to a meson build infrastructure > > by the next release > > > > scipy-.tar.xz is no longer released. > > This should be part of the commit log proper, to explain why you > switched to the .tar.gz archive. > > > For some reason, a new "Python.h" missing header > > build time failure arised. I solve it with a -Ipython include. > > This should also be part of the commit log > > > Then test script failed, with linker/runtime missing symbols error, > > all related to the linear algebra portion (which we do test). > > Errors like "undefined reference to __atomic_compare_exchange 8" > > regarding > > "site-/scipy/optimize/_highs/_ > highs_wrapper.cpython-310-arm-linux-gnueabi.so" > > to be specific. I solved it with a -latomic flag. > > I see you pass it via CFLAGS; that's not correct, it should be passed > via LDFLAGS. If that doesnt work, it should be explained why. > > Also, we can't arbitrary link agains -latomic, because not all > toolchains have it. See cairo.mk for how it should be conditionally > used. > > Regards, > Yann E. MORIN. > > > Once 1.9.2 is out, we know we already have my V3-1.9.1 patch > > serie that builds "fine" with meson, it involved a minor tweak > > (hopefuly solved by this time). The test script no longer did pass > though, > > this serie is not 100% ready to go > > --- > > package/python-scipy/python-scipy.hash | 2 +- > > package/python-scipy/python-scipy.mk | 7 +++++-- > > 2 files changed, 6 insertions(+), 3 deletions(-) > > > > diff --git a/package/python-scipy/python-scipy.hash > b/package/python-scipy/python-scipy.hash > > index 0274679c43..1ba239aabf 100644 > > --- a/package/python-scipy/python-scipy.hash > > +++ b/package/python-scipy/python-scipy.hash > > @@ -1,5 +1,5 @@ > > # Locally generated > > -sha256 > 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 > scipy-1.8.1.tar.xz > > +sha256 > 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 > scipy-1.9.1.tar.gz > > sha256 > 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c > LICENSE.txt > > sha256 > 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 > scipy/linalg/src/lapack_deprecations/LICENSE > > sha256 > 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 > scipy/ndimage/LICENSE.txt > > diff --git a/package/python-scipy/python-scipy.mk > b/package/python-scipy/python-scipy.mk > > index a8c23c6c88..1619b9f40a 100644 > > --- a/package/python-scipy/python-scipy.mk > > +++ b/package/python-scipy/python-scipy.mk > > @@ -4,8 +4,8 @@ > > # > > > ################################################################################ > > > > -PYTHON_SCIPY_VERSION = 1.8.1 > > -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz > > +PYTHON_SCIPY_VERSION = 1.9.1 > > +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz > > PYTHON_SCIPY_SITE = > https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) > > PYTHON_SCIPY_LICENSE = \ > > BSD-3-Clause, \ > > @@ -36,6 +36,8 @@ PYTHON_SCIPY_INSTALL_STAGING = YES > > PYTHON_SCIPY_SETUP_TYPE = setuptools > > PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 > > > > +PYTHON_SCIPY_CFLAGS = \ > > + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) > > PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ > > -L$(PYTHON3_PATH)/site-packages/numpy/core/lib > > # -lnpyrandom localization > > @@ -44,6 +46,7 @@ PYTHON_SCIPY_LDFLAGS += \ > > > > PYTHON_SCIPY_ENV = \ > > F90=$(TARGET_FC) \ > > + CFLAGS="$(PYTHON_SCIPY_CFLAGS) -latomic" \ > > LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" > > > > # Provide system configuration options to numpy distutils extensions, > telling > > -- > > 2.20.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' > conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ > | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is > no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v > conspiracy. | > > '------------------------------^-------^------------------^--------------------' > -------------- next part -------------- An HTML attachment was scrubbed... URL: From yann.morin.1998 at free.fr Sun Oct 2 09:59:04 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 11:59:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> <20221001165241.GM30794@scaer> Message-ID: <20221002095904.GA2517@scaer> Fabrice, All, On 2022-10-01 23:06 +0200, Fabrice Fontaine spake thusly: > Hi, > Le?sam. 1 oct. 2022 ??18:52, Yann E. MORIN < [1]yann.morin.1998 at free.fr> a ?crit?: > > Fabrice, All, > > On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > > Denial of service attack and buffer overflow against TLS 1.3 > > servers using session ticket resumption. When built with > > --enable-session-ticket and making use of TLS 1.3 server code in > > wolfSSL, there is the possibility of a malicious client to craft a > > malformed second ClientHello packet that causes the server to crash. > > This issue is limited to when using both --enable-session-ticket and TLS > > 1.3 on the server side. Users with TLS 1.3 servers, and having > > --enable-session-ticket, should update to the latest version of wolfSSL. > > I see that we are not explicitly using either --enable or > --disable-session-ticket, so what is the default, and were we impacted? > > session-ticket is disabled by default. > Moreover, session-ticket is enabled if nginx, wpas, haproxy or lighty is enabled (but all of them are disabled). I am not sure I grokked that sentence. > So, we were not impacted except if the user has explicitly enabled this option in its own tree. OK. > Also, we should have an explicit setting for that, rather than leave it > to chance. > > Why not, but wolfssl has a ton of options, should we also explicitly set them to false even if they are disabled by default? Indeed, I just saw how many iot has, so we can't decently have all of them explicitly stated. I was ;ostly wondering if adding an explicit --disable-session-ticket to then add a _IGNORE_CVES, which could be backported, rather than backporting the version bump, to the stable branches. But since they all already have 5.5.0, even the LTS, backporting the version bump is better than adding an explicit --disable. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 2 10:06:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 2 Oct 2022 12:06:18 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221001213928.6B43A86743@busybox.osuosl.org> References: <20221001213928.6B43A86743@busybox.osuosl.org> Message-ID: <20221002120618.70631fe4@windsurf> On Sat, 1 Oct 2022 23:35:46 +0200 Yann E. MORIN wrote: > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ License list should be comma-separated, not space-separated. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From peter at korsgaard.com Sun Oct 2 11:30:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 13:30:37 +0200 Subject: [Buildroot] [git commit branch/2022.05.x] Update for 2022.05.3 Message-ID: <20221002113101.A241C86754@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4dc1fffca00d07462f59d195a8a8b73b1a885110 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.05.x Signed-off-by: Peter Korsgaard --- CHANGES | 50 ++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 53 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 7b2cb2a2c6..c68224bb37 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,53 @@ +2022.05.3, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, containerd, + cups, dhcpcd, directfb, docker-cli, docker-engine, connman, + edk2, edk2-platform, elf2flt, expat, ffmpeg, ficl, freeswitch, + gcc, gdb, git, glibc, gnutls, go, gocryptfs, graphicsmagick, + grub2, gst1-plugins-bad, gst1-plugins-good, heirloom-mailx, + icu, igh-ethercat, imagemagick, imx-gpu-viv, jack2, jose, + jpeg, jquery-ui-themes, kodi, kvm-unit-tests, libcamera, + libconfuse, libfreeimage, libglvnd, libgpg-error, libinput, + libmdbx, libp11, libsepol, libtirpc, libupnp, libvirt, + libvncserver, libwpe, libxml2, libzlib, linux, linux-tools, + lshw, m4, makedevs, mali-driver, mariadb, memcached, mesa3d, + minidlna, mosquitto, mutt, mv-ddr-marvell, ncurses, ne10, + netsniff-ng, networkd-dispatcher, ocrad, ola, opencv4, + openocd, openssh, openvmtools, pango, pcsc-lite, pistache, + polkit, postgis, postgresql, python-crossbar, + python-paho-mqtt, python-pygame, python-service-identity, + python-txdbus, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, redis, + rng-tools, rsync, rsyslog, rtl8189es, rtl8723bu, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, + syslog-ng, tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, + uacme, uboot-tools, uclibc, unzip, usbguard, v4l2loopback, + vim, waffle, webkitgtk, weston, wolfssl, wpewebkit, xfsprogs, + xserver_xorg-server, xtables-addons, zziplib + + Issues resolved: + + #14556: python-crossbar fails to build + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.05.2, released August 31st, 2022 Important / security related fixes. diff --git a/Makefile b/Makefile index 14edc46865..0c2e7d7d77 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.05.2 +export BR2_VERSION := 2022.05.3 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1661958000 +BR2_VERSION_EPOCH = 1664710000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index 7d68392a8d..f3d4866d33 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.05.2' +RELEASE='2022.05.3' ### Change here for more memory/cores ### VM_MEMORY=2048 From yann.morin.1998 at free.fr Sun Oct 2 11:35:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 13:35:59 +0200 Subject: [Buildroot] [git commit] package/volk: license list is comma-separated Message-ID: <20221002113701.4B6648677D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Reported-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 5e2e50ae73..af5bd4306b 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ +VOLK_LICENSE = GPL-3.0+, LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From wbx at openadk.org Sun Oct 2 11:59:59 2022 From: wbx at openadk.org (Waldemar Brodkorb) Date: Sun, 2 Oct 2022 13:59:59 +0200 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git Message-ID: Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB -- 2.30.2 From yann.morin.1998 at free.fr Sun Oct 2 12:11:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 14:11:21 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221002120618.70631fe4@windsurf> References: <20221001213928.6B43A86743@busybox.osuosl.org> <20221002120618.70631fe4@windsurf> Message-ID: <20221002121121.GB2517@scaer> Thomas, All, On 2022-10-02 12:06 +0200, Thomas Petazzoni via buildroot spake thusly: > On Sat, 1 Oct 2022 23:35:46 +0200 > Yann E. MORIN wrote: > > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ > License list should be comma-separated, not space-separated. Woops, fixed. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From angelo at amarulasolutions.com Sun Oct 2 13:12:35 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 2 Oct 2022 15:12:35 +0200 Subject: [Buildroot] [PATCH] linux: update cip/cip-rt kernels to latest versions Message-ID: <20221002131235.529951-1-angelo@amarulasolutions.com> Signed-off-by: Angelo Compagnucci --- linux/Config.in | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index de9bf0ad7a..30e117a6af 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -32,7 +32,7 @@ config BR2_LINUX_KERNEL_LATEST_VERSION select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION - bool "Latest CIP SLTS version (5.10.115-cip7)" + bool "Latest CIP SLTS version (5.10.145-cip17)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help CIP launched in the spring of 2016 to address the needs of @@ -52,7 +52,7 @@ config BR2_LINUX_KERNEL_LATEST_CIP_VERSION https://www.cip-project.org config BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION - bool "Latest CIP RT SLTS version (5.10.109-cip5-rt4)" + bool "Latest CIP RT SLTS version (5.10.145-cip17-rt7)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help Same as the CIP version, but this is the PREEMPT_RT realtime @@ -129,8 +129,8 @@ endif config BR2_LINUX_KERNEL_VERSION string default "5.17.15" if BR2_LINUX_KERNEL_LATEST_VERSION - default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION - default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION + default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION + default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ if BR2_LINUX_KERNEL_CUSTOM_VERSION default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL -- 2.34.1 From peter at korsgaard.com Sun Oct 2 14:10:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 02 Oct 2022 16:10:22 +0200 Subject: [Buildroot] Buildroot 2022.05.3 released Message-ID: <87lepy2u5t.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.05.3 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.05.3.tar.gz or http://buildroot.org/downloads/buildroot-2022.05.3.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.05.3 is a bugfix release, fixing a number of important / security related issues discovered since the 2022.05.2 release. - Fixed compatibility issue with make 4.3 and the 'printvars' / 'show-vars' commands. - Dependencies: Ensure 'find' and 'xargs' are available on the build host. - Security fixes for busybox, clamav, docker-engine, expat, git, gnutls, go, heirloom-mailx, imagemagick, libconfuse, libtirpc, libwpe, libxml2, libzlib, mariadb, minidlna, mosquitto, networkd-dispatcher, postgresql, python3, redis, rsync, sqlite, squid, tcpreplay, tinyproxy, unzip, v4l2loopback, vim, webkitgtk, wolfssl, wpewebkit, - Fixes for download/compilation/runtime/license issues in ace, arm-trusted-firmware, babeltrace, boost, botan, busybox, cog, connman, containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, edk2, edk2-platforms, elf2flt, ffmpeg, ficl, freeswitch, gcc, gdb, glibc, gocryptfs, graphicsmagick, grub2, gst1-plugins-bad, gst1-plugins-good, icu, igh-ethercat, imx-gpu-viv, jack2, jose, jpeg, jquery-ui-themes, kodi, libcamera, libfreeimage, libglvnd, libgpg-error, libinput, libmdbx, libp11, libsepol, libupnp, libvirt, libvncserver, linux, lshw, m4, makedevs, makedumpfile, mali-driver, mariadb, memcached, mesa3d, mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, ocrad, opencv4, openocd, openssh, pango, pcsc-lite, pistache, polkit, postgis, python-crossbar, python-paho-mqtt, python-pygame, qemu, qlibc, qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, rsyslog, rtl8189es, rtl8723bu, runc, rustc, sconeserver, sdl2, snort, sox, stress-ng, strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, syslog-ng, tcf-agent, tesseract-ocr, uacme, uboot-tools, usbguard, waffle, xfsprogs, xserver_xorg-server, xtables-addons, zziplib For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.05.3 Users of the affected packages are strongly encouraged to upgrade. Notice that the 2022.05.x series is now END OF LIFE. Please migrate to the 2022.08.x series instead which will be supported until December 2022. Many thanks to all the people contributing to this release: git shortlog -sn 2022.05.2.. 61 Fabrice Fontaine 29 Ricardo Martincoski 23 Giulio Benetti 16 Thomas Petazzoni 13 Yann E. MORIN 11 Christian Stewart 8 Francois Perrad 7 Romain Naour 6 Peter Korsgaard 5 Adrian Perez de Castro 5 Lang Daniel 4 Bernd Kuhls 4 Luca Ceresoli 4 Marcus Hoffmann 3 James Hilliard 3 Julien Olivain 3 Quentin Schulz 2 Alexandru Ardelean 2 Arnout Vandecappelle 2 Baruch Siach 2 Nicola Di Lieto 1 Alistair Francis 1 Andreas Ziegler 1 Arnout Vandecappelle (Essensium/Mind) 1 Atsushi Nemoto 1 Bram Vlerick 1 Emile Cormier 1 Florian Fainelli 1 Grzegorz Blach 1 Gwenhael Goavec-Merou 1 Joachim Wiberg 1 Joel Stanley 1 John Keeping 1 Konstantin Menyaev 1 Markus Mayer 1 Maxim Kochetkov 1 Michael Klein 1 Michael Nosthoff 1 Niklas Cassel 1 Peter Seiderer 1 Roosen Henri 1 Stefan Agner 1 Thomas Devoogdt 1 Titouan Christophe 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From bernd.kuhls at t-online.de Sun Oct 2 14:15:41 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 02 Oct 2022 16:15:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix build with BR2_OPTIMIZE_S References: <20220927031702.2918414-1-james.hilliard1__18922.8034157836$1664248650$gmane$org@gmail.com> Message-ID: Am Mon, 26 Sep 2022 21:17:02 -0600 schrieb James Hilliard: > Add patch from glibc patchwork to fix bug #29576. > > Details: > https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > - > http://autobuild.buildroot.net/results/ 5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > > Signed-off-by: James Hilliard > Tested-by: Bernd Kuhls [build-tested using this defconfig: BR2_x86_64=y BR2_TOOLCHAIN_BUILDROOT_CXX=y] From bernd.kuhls at t-online.de Sun Oct 2 14:33:53 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:33:53 +0200 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash Message-ID: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:33:54 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:33:54 +0200 Subject: [Buildroot] [PATCH 2/2] package/hdparm: bump version to 9.65 In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <20221002143354.1909295-2-bernd.kuhls@t-online.de> Release notes: https://sourceforge.net/p/hdparm/news/ Signed-off-by: Bernd Kuhls --- package/hdparm/hdparm.hash | 4 ++-- package/hdparm/hdparm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index b86afc7cfe..1d73585232 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ -sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz +sha1 3bc0916493f2f485c6371ec0fd16418d0e1fa636 hdparm-9.65.tar.gz # Locally computed -sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz +sha256 d14929f910d060932e717e9382425d47c2e7144235a53713d55a94f7de535a4b hdparm-9.65.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT diff --git a/package/hdparm/hdparm.mk b/package/hdparm/hdparm.mk index 2c3b372deb..3c8b77e5eb 100644 --- a/package/hdparm/hdparm.mk +++ b/package/hdparm/hdparm.mk @@ -4,7 +4,7 @@ # ################################################################################ -HDPARM_VERSION = 9.63 +HDPARM_VERSION = 9.65 HDPARM_SITE = https://downloads.sourceforge.net/project/hdparm/hdparm HDPARM_LICENSE = BSD-Style HDPARM_LICENSE_FILES = LICENSE.TXT -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:46:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:46:29 +0200 Subject: [Buildroot] [PATCH 2/2] package/kodi: fix build with fmt >= 9.x In-Reply-To: <20221002144629.2105385-1-bernd.kuhls@t-online.de> References: <20221002144629.2105385-1-bernd.kuhls@t-online.de> Message-ID: <20221002144629.2105385-2-bernd.kuhls@t-online.de> For details see https://github.com/xbmc/xbmc/pull/21674 Build-tested using this previously broken defconfig: BR2_x86_64=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_PACKAGE_KODI=y BR2_PACKAGE_MESA3D=y BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_IRIS=y BR2_PACKAGE_MESA3D_OPENGL_EGL=y BR2_PACKAGE_MESA3D_OPENGL_ES=y BR2_PACKAGE_PYTHON3=y BR2_PACKAGE_PYTHON3_PY_ONLY=y Signed-off-by: Bernd Kuhls --- ...char-as-formatting-of-non-void-point.patch | 54 +++++++++++++++++++ ...t-as-char-as-formatting-of-non-void-.patch | 33 ++++++++++++ 2 files changed, 87 insertions(+) create mode 100644 package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch create mode 100644 package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch diff --git a/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch b/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch new file mode 100644 index 0000000000..af68de220c --- /dev/null +++ b/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch @@ -0,0 +1,54 @@ +From 44b30c116682968bacf8aec566fc9c193026ecc9 Mon Sep 17 00:00:00 2001 +From: Rudi Heitbaum +Date: Wed, 6 Jul 2022 22:48:35 +1000 +Subject: [PATCH] GLUtils: cast as char as formatting of non-void pointers + is disallowed + +Downloaded from upstream commit: +https://github.com/xbmc/xbmc/commit/44b30c116682968bacf8aec566fc9c193026ecc9 + +Signed-off-by: Bernd Kuhls +--- + xbmc/utils/GLUtils.cpp | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +diff --git a/xbmc/utils/GLUtils.cpp b/xbmc/utils/GLUtils.cpp +index 1ef804709f..c36dcf6a20 100644 +--- a/xbmc/utils/GLUtils.cpp ++++ b/xbmc/utils/GLUtils.cpp +@@ -148,27 +148,27 @@ void _VerifyGLState(const char* szfile, const char* szfunction, int lineno) + void LogGraphicsInfo() + { + #if defined(HAS_GL) || defined(HAS_GLES) +- const GLubyte *s; ++ const char* s; + +- s = glGetString(GL_VENDOR); ++ s = reinterpret_cast(glGetString(GL_VENDOR)); + if (s) + CLog::Log(LOGINFO, "GL_VENDOR = %s", s); + else + CLog::Log(LOGINFO, "GL_VENDOR = NULL"); + +- s = glGetString(GL_RENDERER); ++ s = reinterpret_cast(glGetString(GL_RENDERER)); + if (s) + CLog::Log(LOGINFO, "GL_RENDERER = %s", s); + else + CLog::Log(LOGINFO, "GL_RENDERER = NULL"); + +- s = glGetString(GL_VERSION); ++ s = reinterpret_cast(glGetString(GL_VERSION)); + if (s) + CLog::Log(LOGINFO, "GL_VERSION = %s", s); + else + CLog::Log(LOGINFO, "GL_VERSION = NULL"); + +- s = glGetString(GL_SHADING_LANGUAGE_VERSION); ++ s = reinterpret_cast(glGetString(GL_SHADING_LANGUAGE_VERSION)); + if (s) + CLog::Log(LOGINFO, "GL_SHADING_LANGUAGE_VERSION = %s", s); + else +-- +2.30.2 + diff --git a/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch b/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch new file mode 100644 index 0000000000..41dc3356bd --- /dev/null +++ b/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch @@ -0,0 +1,33 @@ +From 651c82853fe69dc5aa3e6a50f2eb2f752caafba0 Mon Sep 17 00:00:00 2001 +From: Rudi Heitbaum +Date: Mon, 11 Jul 2022 09:39:02 +0000 +Subject: [PATCH] WinSystemX11: cast as char as formatting of non-void + pointers is disallowed + +Downloaded from upstream commit: +https://github.com/xbmc/xbmc/commit/651c82853fe69dc5aa3e6a50f2eb2f752caafba0 + +Signed-off-by: Bernd Kuhls +--- + xbmc/windowing/X11/WinSystemX11.cpp | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/xbmc/windowing/X11/WinSystemX11.cpp b/xbmc/windowing/X11/WinSystemX11.cpp +index 8a18288fd8..033c0f77bf 100644 +--- a/xbmc/windowing/X11/WinSystemX11.cpp ++++ b/xbmc/windowing/X11/WinSystemX11.cpp +@@ -1038,7 +1038,10 @@ bool CWinSystemX11::HasWindowManager() + + if(status == Success && items_read) + { +- CLog::Log(LOGDEBUG,"Window Manager Name: %s", data); ++ const char* s; ++ ++ s = reinterpret_cast(data); ++ CLog::Log(LOGDEBUG, "Window Manager Name: {}", s); + } + else + CLog::Log(LOGDEBUG,"Window Manager Name: "); +-- +2.30.2 + -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:46:28 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:46:28 +0200 Subject: [Buildroot] [PATCH 1/2] package/kodi: add comment to display udev dependency for gbm when wayland/x11 are disabled Message-ID: <20221002144629.2105385-1-bernd.kuhls@t-online.de> Without this additional comment only the comment kodi needs an OpenGL EGL backend with OpenGL or GLES support is displayed which is not enough to guide users. Signed-off-by: Bernd Kuhls --- package/kodi/Config.in | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/kodi/Config.in b/package/kodi/Config.in index 90710683db..7bd8bc2943 100644 --- a/package/kodi/Config.in +++ b/package/kodi/Config.in @@ -27,6 +27,9 @@ config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_GBM depends on BR2_PACKAGE_HAS_UDEV # libinput select BR2_PACKAGE_KODI_PLATFORM_SUPPORTS +comment "kodi needs udev support for gbm" + depends on !BR2_PACKAGE_KODI_PLATFORM_SUPPORTS + config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_WAYLAND bool default y -- 2.30.2 From robimarko at gmail.com Sun Oct 2 15:04:43 2022 From: robimarko at gmail.com (Robert Marko) Date: Sun, 2 Oct 2022 17:04:43 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package Message-ID: <20221002150443.159058-1-robimarko@gmail.com> mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko --- Changes in v2: * Correct license * Add host-pkgconf to DEPENDENCIES * Add minimal required kernel config options --- package/Config.in | 1 + package/mdio-tools/Config.in | 9 +++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ 4 files changed, 33 insertions(+) create mode 100644 package/mdio-tools/Config.in create mode 100644 package/mdio-tools/mdio-tools.hash create mode 100644 package/mdio-tools/mdio-tools.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ed41e8bdd4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -536,6 +536,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..feb1e825ac --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,9 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..308a23824b --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) -- 2.37.3 From Alexey.Brodkin at synopsys.com Sun Oct 2 15:24:16 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Sun, 2 Oct 2022 15:24:16 +0000 Subject: [Buildroot] [arc-buildroot] [autobuild.buildroot.net] Your daily results for 2022-09-30 In-Reply-To: <3jt0wnw0cp-1@m0098571.ppops.net> References: <3jt0wnw0cp-1@m0098571.ppops.net> Message-ID: Hi Thomas, all, > Gitlab CI failures > ================== > > Below is a list of Gitlab CI job failures in relation to defconfigs or > runtime tests you are in charge of. Please help us improving the quality > of Buildroot by investigating those build failures and sending patches > to fix them. > > Results for 'master' > -------------------- > > Build failures related to your defconfigs: > > defconfig | link to the job > ----------------------------------+-------------------------------------------------------------- > snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769991 > That happens because upstream glibc doesn't have support of ARCompact architecture, i.e. ARC700 processors are not supported even though changes compared to ARCv2 which is well supported in upstream are really quite subtle, see [1] for example. We haven't seen this problem much earlier since we started from glibc fork used for ARC targets and in our fork we used to have ARCompact patches. But later we got rid of ARC fork of glibc and moved to purely upstream version, see [2] and that's when ARC700 problem became possible. Still we've started work on getting the same thing ported to Buildroot, see [3] but put it on pause for a while. I guess it's the right time to finalize that activity finally as there're still ARC700 hardware in the wild so let's make our precious users a bit happier ;) -Alexey [1] https://github.com/openwrt/openwrt/blob/openwrt-21.02/toolchain/glibc/patches/300-arc.patch [2] https://git.buildroot.net/buildroot/commit/?id=40258a3f395fd4c285e7ded27b25edd71f5c33b4 [3] https://github.com/foss-for-synopsys-dwc-arc-processors/buildroot/pull/30/commits/c0b51289470ae089f19956288a0dbd1fb5a76c83 From veredz72 at gmail.com Sun Oct 2 15:33:02 2022 From: veredz72 at gmail.com (Zvi Vered) Date: Sun, 2 Oct 2022 18:33:02 +0300 Subject: [Buildroot] buildroot 2022.02.1: apache (httpd) - libgcc_s.so.1 must be installed for pthread_cancel to work In-Reply-To: <87mtaobvm1.fsf@dell.be.48ers.dk> References: <87v8pebk2s.fsf@dell.be.48ers.dk> <87r101as98.fsf@dell.be.48ers.dk> <87mtaobvm1.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, Today I managed to build rootfs + kernel with a gcc created by buildroot. This time I used: i686 (x32) httpd worked fine. In /lib I noticed there are 2 libgcc files: libgcc_s.so.1 (95962 bytes) libgcc_s.so (132 bytes) Both files are real (not static link) In the external gcc I used before (created with crosstool-ng few years ago) there was only one libgcc_s file. The other one was a static link. Do you think this difference is the cause to the problem I had ? Thank you, Zvika On Sat, Sep 24, 2022 at 7:11 PM Peter Korsgaard wrote: > >>>>> "Zvi" == Zvi Vered writes: > > > Hi Peter, > > There is no real technical reason. > > I thought it would be right to use gcc I got from the vendor (Xilinx) > > Also, buildroot supports using external toolchain. > > All gcc libs are copied (by buildroot) to /lib64. > > Should I try using gcc built by buildroot ? > > Yes please, if nothing else then to verify that the issue is specific to > your toolchain. We do not have access to that petalinux toolchain, so it is > hard to help debugging. > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bernd.kuhls at t-online.de Sun Oct 2 15:51:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 17:51:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.0 Message-ID: <20221002155129.3199774-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...ion-to-disable-optional-neon-suppor.patch} | 0 ...-Include-stddef.h-to-fix-build-erro.patch} | 0 ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ .../0007-include-drop-c11-compat-h.patch | 100 -------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..bf72937a66 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.0 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..449fc58818 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html +sha256 b1f9c8fd08f2cae3adf83355bef4d2398e8025f44947332880f2d0066bdafa8c mesa-22.2.0.tar.xz +sha512 13a21b9ed6b0a5dfd0293b73df271a929c3155d83e8beb3d958fe18d79277f3611bf5b26a1186d446f4e1479a36bb13d0a13d6ac68937989fe7a0d917e12171e mesa-22.2.0.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 9fc9935614..5e473bbeea 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.0 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From peter at korsgaard.com Sun Oct 2 14:18:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 16:18:53 +0200 Subject: [Buildroot] [git commit] Update for 2022.05.3 Message-ID: <20221002164535.72F0586795@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=446c584c96613d0d0cd32ed20858b191d96310d9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master (cherry picked from commit 4dc1fffca00d07462f59d195a8a8b73b1a885110) [Peter: drop Makefile/Vagrantfile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/CHANGES b/CHANGES index 03c859ceb6..3fc00b44d7 100644 --- a/CHANGES +++ b/CHANGES @@ -134,6 +134,57 @@ #14881: Watchdogd Package missing INSTALL_STAGING #14876: arm-trusted-firmware can no longer be compiled with fPIE +2022.05.3, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, containerd, + cups, dhcpcd, directfb, docker-cli, docker-engine, connman, + edk2, edk2-platform, elf2flt, expat, ffmpeg, ficl, freeswitch, + gcc, gdb, git, glibc, gnutls, go, gocryptfs, graphicsmagick, + grub2, gst1-plugins-bad, gst1-plugins-good, heirloom-mailx, + icu, igh-ethercat, imagemagick, imx-gpu-viv, jack2, jose, + jpeg, jquery-ui-themes, kodi, kvm-unit-tests, libcamera, + libconfuse, libfreeimage, libglvnd, libgpg-error, libinput, + libmdbx, libp11, libsepol, libtirpc, libupnp, libvirt, + libvncserver, libwpe, libxml2, libzlib, linux, linux-tools, + lshw, m4, makedevs, mali-driver, mariadb, memcached, mesa3d, + minidlna, mosquitto, mutt, mv-ddr-marvell, ncurses, ne10, + netsniff-ng, networkd-dispatcher, ocrad, ola, opencv4, + openocd, openssh, openvmtools, pango, pcsc-lite, pistache, + polkit, postgis, postgresql, python-crossbar, + python-paho-mqtt, python-pygame, python-service-identity, + python-txdbus, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, redis, + rng-tools, rsync, rsyslog, rtl8189es, rtl8723bu, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, + syslog-ng, tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, + uacme, uboot-tools, uclibc, unzip, usbguard, v4l2loopback, + vim, waffle, webkitgtk, weston, wolfssl, wpewebkit, xfsprogs, + xserver_xorg-server, xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14556: python-crossbar fails to build + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.05.2, released August 31st, 2022 Important / security related fixes. From peter at korsgaard.com Sun Oct 2 16:45:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 18:45:02 +0200 Subject: [Buildroot] [git commit] docs/website/news.html: add 2022.05.3 announcement Message-ID: <20221002164535.7E16C86796@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c57ee9d7cf81c1c1530e4ff00348d22fdbc473d4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/news.html | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/docs/website/news.html b/docs/website/news.html index 385bdad64b..634462ffcd 100644 --- a/docs/website/news.html +++ b/docs/website/news.html @@ -9,6 +9,28 @@

News

    +
  • +
    +
    +
    +

    2022.05.3 released

    +

    2 October 2022

    +
    +
    +

    The 2022.05.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2022.05.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2022.05.3 release.

    + +

    Notice that the 2022.05.x series is now end of life. Please migrate to + the 2022.08 series instead which will be supported until December 2022.

    +
    +
    +
    • +
  • From peter at korsgaard.com Sun Oct 2 19:37:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 21:37:02 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] Update for 2022.02.6 Message-ID: <20221002193739.64875867A0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=374f83630bafe7371ecd751cf07e3e7c0ce1c71e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Peter Korsgaard --- CHANGES | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 51 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 4d7076e908..055b262d7a 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,51 @@ +2022.02.6, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, connman, + containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, + edk2, edk2-platforms, elf2flt, expat, ffmpeg, ficl, + freeswitch, freetype, gcc, gdb, git, gnutls, go, + graphicsmagic, grub2, gst1-plugins-bad, gst1-plugins-good, + heirloom-mailx, icu, igh-ethercat, imagemagick, imx-gpu-viv, + jose, jpeg, jquery-ui-themes, kodi, libconfuse, libfreeimage, + libglvnd, libgpg-error, libinput, libmdbx, libsepol, libtirpc, + libupnp, libvirt, libvncserver, libwpe, libxml2, libzlib, + linux, linux-tools, lshw, m4, makedevs, makedumpfile, + mali-driver, mariadb, memcached, mesa3d, minidlna, mosquitto, + mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, + networkd-dispatcher, ocrad, opencv4, openocd, openssh, pango, + pcsc-lite, polkit, postgis, postgresql, python-paho-mqtt, + python-pygame, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, + rsync, rsyslog, rtl8189es, rtl8723be, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, + tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, uacme, + uboot-tools, uclibc, unzip, usbguard, v4l2loopback, vim, + webkitgtk, wolfssl, wpewebkit, xfsprogs, xserver_xorg-server, + xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.02.5, released August 31st, 2022 Important / security related fixes. diff --git a/Makefile b/Makefile index 51de2066d7..93125e16a6 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.02.5 +export BR2_VERSION := 2022.02.6 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1661977000 +BR2_VERSION_EPOCH = 1664739000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index cf6192a9d6..8ff587100c 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.02.5' +RELEASE='2022.02.6' ### Change here for more memory/cores ### VM_MEMORY=2048 From giulio.benetti at benettiengineering.com Sun Oct 2 20:45:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Sun, 2 Oct 2022 22:45:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt5webkit: fix qt-webkit-kisok In-Reply-To: <20220615065406.2856780-1-ankit.panchal@einfochips.com> References: <20220615065406.2856780-1-ankit.panchal@einfochips.com> Message-ID: Hi Ankit, sorry for the late reply, On 15/06/22 08:54, Ankit Panchal wrote: > From: Ankit Panchal > > While compilation of qt-webkit-kiosk package we get following error: > ERROR: Unknown module(s) in QT: webkit webkitwidgets > > more detail about the bug is provided at: > https://bugs.buildroot.org/show_bug.cgi?id=14606 > > Following are the changes done: > 1. The installation paths of the qt5webkit modules in the .pri files > has been modified. > 2. And softlinks of the webkit and webkitwidgets packages has been > created at the expected paths. > > Signed-off-by: Ankit Panchal > --- > package/qt5/qt5webkit/qt5webkit.mk | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/package/qt5/qt5webkit/qt5webkit.mk b/package/qt5/qt5webkit/qt5webkit.mk > index 6912359674..a850a03ca9 100644 > --- a/package/qt5/qt5webkit/qt5webkit.mk > +++ b/package/qt5/qt5webkit/qt5webkit.mk > @@ -50,6 +50,23 @@ ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y) > QT5WEBKIT_CONF_OPTS += -DENABLE_SAMPLING_PROFILER=OFF > endif > > +define QT5WEBKIT_CONF_PRI > + $(SED) 's/QT.webkit.includes =.*/QT.webkit.includes = \$$\$$QT_MODULE_INCLUDE_BASE \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit/g' -e 's/QT.webkit.libs =.*/QT.webkit.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit.rpath =.*/QT.webkit.rpath = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit.bins =.*/QT.webkit.bins = \$$\$$QT_MODULE_BIN_BASE/g' -e 's/QMAKE_RPATHDIR +=.*/QMAKE_RPATHDIR += \$$\$$QT_MODULE_LIB_BASE/g' $(@D)/Source/WebKit/qt_lib_webkit.pri > + > + $(SED) 's/QT.webkit_private.includes =.*/QT.webkit_private.includes = \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit\/5.212.0 \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit\/5.212.0\/QtWebKit/g' -e 's/QT.webkit_private.libs =.*/QT.webkit_private.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit_private.bins =.*/QT.webkit_private.bins = \$$\$$QT_MODULE_BIN_BASE/g' $(@D)/Source/WebKit/qt_lib_webkit_private.pri > + > + $(SED) 's/QT.webkitwidgets.includes =.*/QT.webkitwidgets.includes = \$$\$$QT_MODULE_INCLUDE_BASE \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets/g' -e 's/QT.webkitwidgets.libs =.*/QT.webkitwidgets.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets.rpath =.*/QT.webkitwidgets.rpath = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets.bins =.*/QT.webkitwidgets.bins = \$$\$$QT_MODULE_BIN_BASE/g' -e 's/QMAKE_RPATHDIR +=.*/QMAKE_RPATHDIR += \$$\$$QT_MODULE_LIB_BASE/g' $(@D)/Source/WebKit/qt_lib_webkitwidgets.pri > + > + $(SED) 's/QT.webkitwidgets_private.includes =.*/QT.webkitwidgets_private.includes = \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets\/5.212.0 \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets\/5.212.0\/QtWebKitWidgets/g' -e 's/QT.webkitwidgets_private.libs =.*/QT.webkitwidgets_private.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets_private.bins =.*/QT.webkitwidgets_private.bins = \$$\$$QT_MODULE_BIN_BASE/g' $(@D)/Source/WebKit/qt_lib_webkitwidgets_private.pri > +endef Generally we prefer having a local patch instead of SED tweaks since they are difficult to understand. I've become only 1 week ago qt5 package maintainer so I haven't seen your patch, but I've seen this patch: https://patchwork.ozlabs.org/project/buildroot/patch/20220929181350.1026033-1-thomas.ballasi at savoirfairelinux.com/ that I've reviewed. Feel free to check it and comment it since you've faced the same problem. All future patches are welcome. Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > +QT5WEBKIT_POST_CONFIGURE_HOOKS += QT5WEBKIT_CONF_PRI > + > +define QT5WEBKIT_CREATE_SYMLINK > + ln -sf $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/mkspecs/modules/*.pri $(HOST_DIR)/mkspecs/modules/ > + ln -sf $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/include/QtWebKit* $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/ > +endef > +QT5WEBKIT_POST_INSTALL_STAGING_HOOKS += QT5WEBKIT_CREATE_SYMLINK > + > QT5WEBKIT_CONF_OPTS += \ > -DENABLE_TOOLS=OFF \ > -DPORT=Qt \ From peter at korsgaard.com Sun Oct 2 21:01:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 02 Oct 2022 23:01:37 +0200 Subject: [Buildroot] Buildroot 2022.02.6 released Message-ID: <87fsg62b4e.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.02.6 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.02.6.tar.gz or http://buildroot.org/downloads/buildroot-2022.02.6.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.02.6 is a bugfix release on the current long term release, fixing a number of important / security related issues discovered since the 2022.02.5 release. - Fixed compatibility issue with make 4.3 and the 'printvars' / 'show-vars' commands. - Dependencies: Ensure 'find' and 'xargs' are available on the build host. - Security fixes for busybox, clamav, containerd, docker-engine, expat, freetype, git, gnutls, go, heirloom-mailx, imagemagick, libconfuse, libtirpc, libwpe, libxml2, libzlib, mariadb, minidlna, mosquitto, networkd-dispatcher, postgresql, python3, redis, rsync, sqlite, squid, tcpreplay, tinyproxy, unzip, v4l2loopback, vim, webkitgtk, wolfssl, wpewebkit - Fixes for download/compilation/runtime/license issues in ace, arm-trusted-firmware, babeltrace2, boost, botan, busybox, cog, connman, cups, dhcpcd, directfb, docker-cli, docker-engine, edk2, edk2-platforms, elf2flt, ffmpeg, ficl, freeswitch, gcc, gdb, grub2, gst1-plugins-bad, gst1-plugins-good, icu, igh-ethercat, jack2, jose, jpeg, jquery-ui-themes, kodi, libfreeimage, libglvnd, libgpg-error, libinput, libmdbx, libsepol, libupnp, libvirt, libvncserver, linux, linux-tools, lshw, makedevs, makedumpfile, mali-driver, mariadb, memcached, mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, ocrad, opencv4, openocd, openssh, pango, pcsc-lite, polkit, postgis, python-paho-mqtt, python-pygame, qemu, qlibc, qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, rsyslog, rtl8189es, rtl8723bu, runc, rustc, sconeserver, sdl2, snort, sox, stress-ng, strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, tcf-agent, tesseract-ocr, uacme, uboot-tools, usbguard, xfsprogs, xserver_xorg-server, xtables-addons, zziplib For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.02.6 Users of the affected packages are strongly encouraged to upgrade. Many thanks to all the people contributing to this release: git shortlog -sn 2022.02.5.. 54 Fabrice Fontaine 29 Ricardo Martincoski 23 Giulio Benetti 14 Thomas Petazzoni 12 Yann E. MORIN 11 Francois Perrad 7 Peter Korsgaard 6 Christian Stewart 6 Romain Naour 5 Adrian Perez de Castro 5 Bernd Kuhls 5 Lang Daniel 4 Luca Ceresoli 4 Marcus Hoffmann 4 Quentin Schulz 3 James Hilliard 2 Alexandru Ardelean 2 Baruch Siach 2 Julien Olivain 2 Nicola Di Lieto 1 Alistair Francis 1 Andreas Ziegler 1 Arnout Vandecappelle 1 Arnout Vandecappelle (Essensium/Mind) 1 Atsushi Nemoto 1 Bram Vlerick 1 Florian Fainelli 1 Grzegorz Blach 1 Gwenhael Goavec-Merou 1 Joachim Wiberg 1 John Keeping 1 Konstantin Menyaev 1 Markus Mayer 1 Maxim Kochetkov 1 Michael Klein 1 Michael Nosthoff 1 Niklas Cassel 1 Peter Seiderer 1 Roosen Henri 1 Stefan Agner 1 Thomas Devoogdt 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 2 21:05:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:05:31 +0200 Subject: [Buildroot] [git commit] docs/website: update for 2022.02.6 Message-ID: <20221002210552.C281986794@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2572faace9cf6b2081777068f085d577af350b3d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/download.html | 18 +++++++++--------- docs/website/news.html | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+), 9 deletions(-) diff --git a/docs/website/download.html b/docs/website/download.html index 0ecd4b02f1..b28c3a54d7 100644 --- a/docs/website/download.html +++ b/docs/website/download.html @@ -8,37 +8,37 @@
    Download
    -

    Latest long term support release: 2022.02.5

    +

    Latest long term support release: 2022.02.6

    - +
    - +
    -

    buildroot-2022.02.5.tar.gz

    -

    PGP signature

    +

    buildroot-2022.02.6.tar.gz

    +

    PGP signature

    - +
    - +
    -

    buildroot-2022.02.5.tar.xz

    -

    PGP signature

    +

    buildroot-2022.02.6.tar.xz

    +

    PGP signature

    diff --git a/docs/website/news.html b/docs/website/news.html index 634462ffcd..07ca3c0ac1 100644 --- a/docs/website/news.html +++ b/docs/website/news.html @@ -9,6 +9,25 @@

    News

      +
    • +
      +
      +
      +

      2022.02.6 released

      +

      2 October 2022

      +
      +
      +

      The 2022.02.6 bugfix release is out, fixing a number of important / + security related issues discovered since the 2022.02.5 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2022.02.6 release.

      +
      +
      +
      • +
    • From peter at korsgaard.com Sun Oct 2 21:03:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:03:38 +0200 Subject: [Buildroot] [git commit] Update for 2022.02.6 Message-ID: <20221002210552.B6BAE867B7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=12c7b23b4a383fc26f671dad7e1a39310e143a09 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard (cherry picked from commit 374f83630bafe7371ecd751cf07e3e7c0ce1c71e) [Peter: drop Makefile/Vagrantfile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/CHANGES b/CHANGES index 3fc00b44d7..357375c2de 100644 --- a/CHANGES +++ b/CHANGES @@ -345,6 +345,54 @@ #14731: BR2_PACKAGE_IOSTAT #14751: LVM2 Outdated Link +2022.02.6, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, connman, + containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, + edk2, edk2-platforms, elf2flt, expat, ffmpeg, ficl, + freeswitch, freetype, gcc, gdb, git, gnutls, go, + graphicsmagic, grub2, gst1-plugins-bad, gst1-plugins-good, + heirloom-mailx, icu, igh-ethercat, imagemagick, imx-gpu-viv, + jose, jpeg, jquery-ui-themes, kodi, libconfuse, libfreeimage, + libglvnd, libgpg-error, libinput, libmdbx, libsepol, libtirpc, + libupnp, libvirt, libvncserver, libwpe, libxml2, libzlib, + linux, linux-tools, lshw, m4, makedevs, makedumpfile, + mali-driver, mariadb, memcached, mesa3d, minidlna, mosquitto, + mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, + networkd-dispatcher, ocrad, opencv4, openocd, openssh, pango, + pcsc-lite, polkit, postgis, postgresql, python-paho-mqtt, + python-pygame, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, + rsync, rsyslog, rtl8189es, rtl8723be, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, + tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, uacme, + uboot-tools, uclibc, unzip, usbguard, v4l2loopback, vim, + webkitgtk, wolfssl, wpewebkit, xfsprogs, xserver_xorg-server, + xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.02.5, released August 31st, 2022 Important / security related fixes. From fontaine.fabrice at gmail.com Sun Oct 2 21:19:10 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 2 Oct 2022 23:19:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 Message-ID: <20221002211910.9526-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine --- ...vars-outside-of-for-loop-for-std-c90.patch | 39 ------------------- package/darkhttpd/darkhttpd.hash | 4 +- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) delete mode 100644 package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c -- 2.35.1 From peter at korsgaard.com Sun Oct 2 21:21:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:21:57 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] Update for 2022.08.1 Message-ID: <20221002212350.8CE65867CF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=25d865996d1d9753fe7d4dfe39cf18c7e9f91224 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: Peter Korsgaard --- CHANGES | 18 ++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 21 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 03c859ceb6..11b33a1351 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,21 @@ +2022.08.1, released October 2nd, 2022 + + Important / security related fixes. + + Updated/fixed packages: botan, busybox, docker-cli, + docker-engine, expat, git, haproxy, heirloom-mailx, icu, + imx-gpu-viv, libconfuse, libmdbx, libupnp, libxml2, + ltp-testsuite, m4, makedevs, mariadb, mesa3d, meson, + mosquitto, ncurses, openssh, pango, python3, qlibc, + qt5xmlpatterns, rtl8189es, rtl8723bu, rt8723ds, + rtl8812au-aircrack-ng, runc, sox, tinyproxy, uacme, unbound, + unzip, vim, xtables-addons + + Issues resolved (http://bugs.uclibc.org): + + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14921: wpewebkit build fails because of internal build order + 2022.08, released September 10th, 2022 Fixes all over the tree. diff --git a/Makefile b/Makefile index 03488dc6ba..36896684b1 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.08 +export BR2_VERSION := 2022.08.1 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1662822000 +BR2_VERSION_EPOCH = 1664745600 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index fb0f48215c..f558e52ca6 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.08' +RELEASE='2022.08.1' ### Change here for more memory/cores ### VM_MEMORY=2048 From thomas.petazzoni at bootlin.com Mon Oct 3 06:30:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 03 Oct 2022 06:30:32 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-02 Message-ID: <20221003063040.5BA9060ACE@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-02 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 9 | 0 | 0 | 9 | 2022.05.x | 20 | 32 | 0 | 52 | 2022.08.x | 24 | 35 | 0 | 59 | master | 87 | 165 | 0 | 252 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 13 igd2-for-linux-2.1 | 10 sysvinit-2.99 | 9 host-f2fs-tools-1.15.0 | 8 unknown | 8 systemd-250.4 | 7 btrfs-progs-5.16.2 | 6 host-sentry-cli-1.59.0 | 6 autofs-5.1.8 | 5 gensio-2.5.5 | 5 glibc-2.36-44-g2628500f5dff... | 5 libarchive-3.6.1 | 5 host-binutils-2.38 | 4 host-go-1.19.1 | 4 package/acpica/acpica.mk:40... | 3 bcg729-1.1.1 | 2 dash-0.5.11.5 | 2 dropbear-2022.82 | 2 gerbera-1.10.0 | 2 google-breakpad-c85eb4a59b6... | 2 host-gcc-final-11.3.0 | 2 linux-5.10.115-cip7 | 2 linux-5.17.15 | 2 procps-ng-3.3.17 | 2 qemu-7.1.0 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 android-tools-4.2.2+git2013... | 1 attr-2.5.1 | 1 bitcoin-0.21.2 | 1 bpftool-v7.0.0 | 1 dahdi-linux-5c840cf43838e06... | 1 dust-0.8.1 | 1 exempi-2.6.1 | 1 frr-8.3.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 gobject-introspection-1.72.0 | 1 gsl-2.6 | 1 host-gcc-initial-11.3.0 | 1 host-heimdal-7.7.0 | 1 ipmitool-1_8_19 | 1 jack2-1.9.20 | 1 libev-4.33 | 1 libfreeimage-3.18.0 | 1 libgcrypt-1.10.1 | 1 libiec61850-1.5.1 | 1 libnss-3.83 | 1 libtorrent-rasterbar-1.2.15 | 1 linux-serial-test-bf865c37c... | 1 lxc-4.0.12 | 1 make: *** wait: No child pr... | 1 makedumpfile-1.7.0 | 1 memcached-1.6.16 | 1 openpgm-5-3-128 | 1 perl-5.34.1 | 1 pv-1.6.20 | 1 python-cryptography-38.0.1 | 1 quickjs-2021-03-27 | 1 rtl8821au-4235b0ec7d7220a63... | 1 scrypt-1.3.1 | 1 tealdeer-1.5.0 | 1 toolchain-external-codescap... | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 wine-7.0 | 1 wolfssl-5.5.1 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- armeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ab448b5fe409a1d0f2a34eed5da62db9d15fd206 | arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/3f3c83606626aa203b4ae2e0c98c8d5642a935c9 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/ac45d2cb39bdfc1bcd44d4820c2b7de63bac1746 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/6ff930ac19feadee0cf77d59db819fad1eaa5f5f | mips64el | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/9872f517d3daf4f13316b3fab2725573ee8530a0 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f498e6c240ce537be3a9d526fce082a55e062f00 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ccb02b379b29f02d3c67a16400f556b7ba68c5db | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a0d73420bfeee70d69653d7c16b741805c579782 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/997b1da7197e9f970e06567f792b76d305e06759 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7db8df6fb57d10651666da75029a49a60d2e72f3 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/59be6fcfc905dd2c6e5c7e64f3a21c5291c0aab8 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/386e29ec8b8acc39009754a037c6a5213f06ae02 | aarch64_be | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/2f91cc1298febc95609050e700c4953452bc22c0 | sparc64 | bpftool-v7.0.0 | NOK | http://autobuild.buildroot.net/results/88748000512b3077001ae1698b4f88f3be3ddb7e | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2ba7f6f95072be244d57f354f9af53b6612a26bd | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b41c7e00226646516b06ac1454b699b40bb59087 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cd2ca71d4b7e28496c0122a538fcfd5165bddff3 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4a0b34fff94fc58d67da2f76609fb71046f06d33 | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9f892b73dfe85e5b7661ec7fac720b658932de62 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6f42a1332507a8bbcc2d7c0fe814d16254b0845f | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6fcd61df6d512fc39b90bf54a4077f62aa94f630 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9df86edda7315382e749757f37ce53ebad4a8227 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bd754b403755a15b2a2e5b07466b0eb2beb68861 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/51931bd2b39d07252384e6271b58e7e42429ecf3 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2d6bf664888fc029ac1a3e9449725dd3caebf83f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/de99056431235cb58fb8a741042ab3a2918cb1aa | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/82632db4aa585bf0747988fb87ed02cd173cf4be | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6dfbedb2c721cda58eb6a4ec75691ce2fbeecf73 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7ff1c240ba144e35cbe58f7237436546b90e78f2 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0766295fc3b3023741ebe21b01f6e958c8d2baad | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6b71a73292ca39723f567a3d21bdad5b7d50d8de | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3c3a8277a0048167a2520bca470643c6213ca4b5 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0d7e48a061179a2f7cd2442ffba5b2daf968286a | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/842379007e98513751a8a0c2fd30ccfa6246c8e8 | armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/62c01bf20a8ca34bda65f2a6ed319d00ccb0f4d7 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/eae6a45cc196db2bd7ba09d0b75c97a6029319fa | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/7533693a78d1938c25acaf5abffcbf79c24b8605 | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/29c47f34fe831c7c7c7ef09f09c0966cde33d0da | mips | dust-0.8.1 | NOK | http://autobuild.buildroot.net/results/f91583601fd27b22fe5dc53aa826b0da1e213693 | ORPH i686 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/792eeb49e1de86d32d5e13a0af386ffb47c38eca | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/f0a769dbe0611bf8f87d6e4f7c610b305997e1bb | s390x | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/f5fede8f0559780ced1d502695698b0df19dd0da | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/231ca11e195a667638cd5f8fe980263c5b747c69 | or1k | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/d7865a53c02e94b11abecb59d60f3abbf1d0ae8b | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4b5f5e13e0709f2659e81884f7179eb6efd0ab5e | nios2 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/c1872e2120a638a404e0af9b42d7a855b19cee9c | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/f0cb0b88d09d4f8f295b40169c8b46c4d8f0f287 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/13ad70c016ff43ca2a94a539d24e70ef2aaa0fd2 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ce3b6bf5b6de25ceedd0d5cbd2bbb992ce489a66 | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/4f41b2e38141b789bd1e8377b30bd01cd4db9dc7 | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/75770d4bebfc63fd98b4f2aa9dc98b07f0cb5cc8 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4b6914d3a107ffb84ca9f856a1a6c8f47bc2bdd | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9766c50d6c7eb1ee5bff2852da706190bc9357c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f62b0b97f83c1142544ead76f63a64ada6fd3857 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/759b5c8d6cb935fe115d2d9cc2636f4a62a814e3 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d13587d3b1b22a04e7885c42cb33c333ff2a8dc2 | x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/57c2fc3b7d743bbcc55bd2c0fbd8a499b6518a59 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/ab4421d8608cd1f10ff0b50093a035368458b7bc | mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/08b9b9008752a0d444a39a3b54eca11162eb0758 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/5bf057b972cd788d62240b0b21b37ed7139b46f3 | ORPH arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/50a30a88d863828d987c3d7b21b93e45d5fe4a42 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/afbc19d9142325b66eaf5e46f37c1dfe6c428fec | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/364a0bc6c78fa1800b426ca255aa73761707f02e | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2494b927de3962d7b006b01d205a5acd3e09a178 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d78671ccb5ae189041303ab1a98cd0390ed3bd48 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f20ea8e51afd1134a02e01de1e681f57a89b7340 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fb7842c70d086c242928e61b32c9ae51c3d3132e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d857da25f8346966ea07eddff35d2219788c7fd8 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f814fc830d57b7e550fa943ec718e0469e41646 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68c3a1f83ec5e9984842147d5c54713a7cea4a4c | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b245354ce7f9d256c1d3beaeaf88aac84d2cbaf9 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb3638f8c395efa68c7c094021b634bbddbeec97 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/68b31989ddfd08b3ff21cf8febc3cbb0e00a8ee2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/5e96cf7f06a387f0004ffa109801650412378b26 | sh4a | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/322c3f54a14fa50c1c42070832272de60f793546 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f5186eb2e696794d68692c24a9e2b634f8f60cc0 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f16a6fb764482813c4668ebfcb6f62ccbf6cede8 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/466edf5b9dad7bf2ebba686410b2f5a71854af3e | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/cebbe8539dd3fb2a756fc03eec12d2ee8cf268f1 | mips | host-heimdal-7.7.0 | NOK | http://autobuild.buildroot.net/results/15b62869df902343b016825e16507ee8cd07c596 | ORPH microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/02489165be43aad8765bcd19238795c37972fdd9 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9caea463b06d69c9270057851df1f0c35609bfb3 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7456cc6b2198cfda60858b7f3444aade01ab193b | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d1fc894fbe4b28a9f805346acbccff96964edf8f | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/709eefa34db11a6683fc5a1607ab8288fc67483b | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b6eec45a27fe94cd2db772aa51e59d56471f5ec | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7908ac4dba3264f08c665a1e30c62779f6bdbc52 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2d17a1e9c808b608deddf2159a53c0a5391a6d5 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b93f471eceda28851600ecef3e2860ed81d2ded | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4599acd1e3a96aa0a0ea7dc57024f5a3cb9ca9c2 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/024a0b4534d283287b28ec986740ad4ccda5b678 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c11533c3436fa018542856a58f87e8ebd89cd537 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0c5efe68021992e43b25dd59eea5ce1ff731cab1 | m68k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/44d118ce9fcc567e30bed23fc84a4447794974e7 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aa942d840c7ed168590a3c1f429f1327244ac72b | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/be9e0ed859ee30e198ad749aef7d502858d2b49a | armeb | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/9ca518073ccb9325288e7805c9394576573d96ba | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/f5eb6d64a7d2d7b473802a0e4eb4afc5de68abea | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/431ab63c495f0a7422b13a16636bfbd41bf7f81f | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/65bd177e0eea0fa81acbd37b7e63ebc2fc20f758 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e0f7dc5f06ec46979fc73e2918e39df8c1cb7ef2 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0b019f6147ec0cafe922e8e395554bbcaf24b343 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/90d21e8add96acaed3efca376d04e8b8f7caa86c | arm | libev-4.33 | NOK | http://autobuild.buildroot.net/results/0607ee8ebfb06d174701a8ba1457ca8a3daebfc9 | ORPH powerpc64 | libfreeimage-3.18.0 | NOK | http://autobuild.buildroot.net/results/790fbf2c1043449977670ba47226f943c34fd374 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/ba06d86309b8021847ec5870d29983fbc86d60b6 | ORPH or1k | libiec61850-1.5.1 | NOK | http://autobuild.buildroot.net/results/077176f30029abc2a5da7099134bfc70503924b2 | i686 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ea4c1fb38f244fceea8c4e543ec440f37219237c | mipsel | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/c55847a3545ac83197efc9d87eb0683943e3fba6 | m68k | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/439ffad1589c6f785fa7e95554dd2690b286d430 | ORPH powerpc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/3a4a4343bb3c3c038a352c48f6882d1eb1b73173 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/6a6763b748eb5866a68e474d3bd588699b983679 | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/431ac56152a9bd1b73074e3f9dd8d8575753e35b | ORPH riscv64 | linux-serial-test-bf865c37c... | NOK | http://autobuild.buildroot.net/results/f6ac2f094fb721739cf4c9da7bc87fad5afb6630 | sh4a | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/3e79e5b5e7d1c44fd28bd243f4c14b5e00e459f5 | powerpc | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/6a96fbf999656d5576592406af16b51a0abdec87 | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/0af2945b442217ccb46b34f0df9047202e9c8dcd | mips | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/52948c321953f2ea826046eecf208b8d37d797cc | ORPH xtensa | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/1058e9cf37aa019fd7120b2f1efe18028be06acd | aarch64_be | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/433a1ed7ec65a9a0121a0a68d8134359978d2119 | powerpc64le | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/39e25e01a8bfe266a31bace96b7c56aaeb3c546a | mips64el | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9d7dc3eb2a31a4e35de9d237de54293d4d04865e | arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/d7a6079930597da91a9744d9a26da79940e3ab13 | s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/8fff8cfdc27e8c7f522b7e6b68d66f3e6ac85acb | ORPH sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/4e180def0c6cd3ae71af856bd3fb49284f4e96ba | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/acd2235a2d95ec89e372e509bf7b5681e7d1b602 | ORPH mips | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/1a893dee40d3fd14e9bc4d929d23aa8b374ec6ff | riscv64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/11a4ec9fea61c839dba99a627c8350e6679caae1 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/335fd16cbee55256b2b5b5de364b7d4ae47ca67c | microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/773c4b844b88e68b2ca52b7fb3bb16bf6537c14d | sparc | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/69243c932c1f93dcae8b580cdf14e4485d2125ae | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/68f59b3bad2e999d0094348f04e1bc28fa7cee65 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a7818c37f2dc9dcdf5fa8384445b2e689462d62c | sh4eb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/dcfba576ea2bc3c677e3ab816782710808583793 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f06517c74681d4551525a6511a97487b6eb55b08 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16bedbe9a1e1a2e98b2e3c57b70343e6b74bad67 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ccd2dcc06c5abc33442cb1dbec668ac49e4eae5a | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e0e3f94119362e5db6aa468857252f538a478baa | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e80ee4fa4ba9d1e525e1f3dcf5a89cd94db2f249 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e79f0746b1f7e8aa209699fa34153d4f017cd91 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4975a54f853603a5e6f310769a32e69fbf3839ee | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/451237da0b3c64392bb8adeedc5deea442600581 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cda841fde1b0c21b04dd88b0d7771e1337990e20 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3bca48bdf4c3908b9ec46dbcb93c7121fb52a80c | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/96e8cd040b7cbe5a933bcc196857651d8db747ff | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4102cbd0673e86bcc0d670adfa3d6a8faa98608a | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fd7d5f3c2ef486d9114349881f1dad20ff33a8dc | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0ae8500ff315264b76d704d36db19a3f1b184251 | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/94bfb5d96e072b2a10943a1befef3265bd64856a | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/996b6f29c579bc1f830957d7492c46ed3abd9f65 | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/411f149d317e2e35a332f41aea5f5bc3d234e249 | mipsel | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/6e000d6706bce65c3dd4547857fffac788a7434f | or1k | unknown | NOK | http://autobuild.buildroot.net/results/dcd662e4c59365623ce8fb1096dfcb2a09891d5c | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/cd1997f44d98fda2768cd39b004af78163864692 | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/0cba89daa7e03da2731cc60ba92100e558d575ad | arc | unknown | NOK | http://autobuild.buildroot.net/results/e072064587ca80028a230146418b65dd29cebdcd | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/2f282888a8d75e9578f117346e616b9c21c1ede0 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/5b2d62fea1500c954716bff91af056c5219cbee1 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/ec0c17c0c5de78f47c2d34a33d13ba739cd05218 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/f2b8810682762e2731c2a3477a799811d9af49d2 | i586 | wine-7.0 | NOK | http://autobuild.buildroot.net/results/ed43a120e54a955855f23caf7a96b3d64d93e3ff | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/0ee18ce2106434dd44e91b802c15559fc3fae2e4 | sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/8bbe5bf479738a4c3d5b1f8ee7df9b07c9f35fa5 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/202ff3596f75ef383d8b747e568e5da1f6f12ae5 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/544c4d5530f1200d7f21ee61ee71ff8cc5144adb | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 4 igd2-for-linux-2.1 | 4 host-rust-1.60.0 | 2 uclibc-1.0.41 | 2 unknown | 2 boost-1.79.0 | 1 brltty-6.4 | 1 cairo-1.16.0 | 1 dash-0.5.11.5 | 1 erofs-utils-1.4 | 1 ffmpeg-4.4.2 | 1 gmp-6.2.1 | 1 host-elf2flt-2021.08 | 1 host-gcc-final-10.4.0 | 1 linux-5.10.115-cip7 | 1 linux-5.17.15 | 1 ltp-testsuite-20220121 | 1 lttng-tools-2.13.2 | 1 matio-1.5.22 | 1 mpg123-1.25.15 | 1 parted-3.4 | 1 pixman-0.40.0 | 1 xenomai | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | boost-1.79.0 | NOK | http://autobuild.buildroot.net/results/288c4c1b93ec52d56de8b31325949625622f2ce0 | powerpc64le | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/b990c47cdc34edd20b2bed9f7d16127b716a6345 | sparc | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/8b847586186adcf32f62a9c63d976a4a98b0894e | sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e5dddea1ccccf20dd21782bb146c52431635ca5c | ORPH or1k | erofs-utils-1.4 | NOK | http://autobuild.buildroot.net/results/e8ceefdbb390237ca77c25fc8bee147e5e063278 | sparc | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/26661f3fc7d3ebb33d074695ead2172b097cd3b3 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/2ea6d8af6ab16be9adad96c36adcf56e11826881 | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/34c8c4f76a44a1411b260f55573eb1e5150fd882 | ORPH arceb | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/340e621b65142a8ddfcde8b7cfc4abc9d24e1eec | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/27fd515bdfc2f9642cdd71a61c84852c69f470e9 | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/df5c928c37e9d75855d02c29ac7df787b602161e | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4ff8aa6d4e67f01a3c1038cb2145695aa3b0dff8 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/603bd7c18c29edacf988a9e107327c280a46ff7e | sparc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/6a14c311e72ffc29cf6dc7ee1c8a82a85a4d0b66 | powerpc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/9d6ca912527a27583e157c7f2afd4968d1c2a63b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fb6bee6a6e5e1c865679d426dec2638d736ba8d1 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f539600c9fac63d289e2e400537a378db2230205 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/faa505f2a2ca0962c88a10c3d018fffb213f3c72 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7c3f2f912a8fb415c882a48371ca1d0d2ffaa043 | m68k | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/9174e26737a0cd3944169b43952c99a1d252b795 | ORPH riscv32 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/0b961a149981c8d0cff7083dda1b95347ad6262d | ORPH mips64el | ltp-testsuite-20220121 | NOK | http://autobuild.buildroot.net/results/6107b8e5dbf2e43e18fc3395c96ddc4e2b1427ba | mips | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/41d73a68ec04e1863789b0abdf279ba46bb5203e | nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/3e3936af07e4bdef9d613428e11a9b149198782a | arm | mpg123-1.25.15 | NOK | http://autobuild.buildroot.net/results/d12fddd6fd90faebf109f543264a5677af3b6112 | ORPH arc | parted-3.4 | NOK | http://autobuild.buildroot.net/results/43306df17d4a9962856df6dcca0bf07799d3035e | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/d4e71e6b2dacfce08425d7b8fb03b37a5d92636e | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/5def99e7282ba04526095b8e80f2860688bfe49e | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/e651d1d0aae691b0ce7d9a6db8a43429078a2e3d | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/fe0f9370c6b81c9038576136bdf449fdb975c070 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/b0011ec92b9c799e6ae02e5f06578bc22a10154f | xtensa | xenomai | NOK | http://autobuild.buildroot.net/results/eae4f87de968a522ba933e1370029c1692c136dc | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 5 igd2-for-linux-2.1 | 5 host-go-1.18.6 | 4 unknown | 2 containerd-1.6.6 | 1 coreutils-9.1 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 freeradius-server-3.2.0 | 1 frr-8.2.2 | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 jemalloc-5.3.0 | 1 libglib2-2.72.3 | 1 linux-5.10.109-cip5-rt4 | 1 linux-5.17.15 | 1 openvmtools-11.3.5-18557794 | 1 pixman-0.40.0 | 1 putty-0.76 | 1 quickjs-2021-03-27 | 1 valgrind-3.19.0 | 1 vdr-2.6.1 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/9053ed2009f894433d702b29f7b4b52f713bc1b3 | sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/c2b028da7dcc9597e4a7519c9b2be5c9f011fb3d | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/1f0159732d8365be13e0df6463e9e97a77bc8e4f | ORPH arm | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/faf4a108787fe5fb9fb8517c4dcb4e3f96630cb5 | x86_64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/45f9fe2ddbb4d0f579be03f89e74659ad61641f4 | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/abded48651f016a8d3d0645f9ea90ba25c934efc | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/ca636b87632b137ed368e05553cf887c8fabea0f | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/310986acc2098c2969db248317c356f0d9a3d6c0 | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/5cc27182096cec576bd86503d2c0299e4ae198b6 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/fe5f0e845ef84a43132da89000b21601aa3315cd | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8ff232ee137cb066759f29d4c60f3ce81efba637 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/10edbd65b9d5471dd216589fad2a256574865358 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/148c0cccbe9c403fafcbf928c9d98d82e08d8a73 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/fa8bc17de12be0b3e79bc0326bd8c343940f1f91 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/349592af893ee3e9e1bece6265bacbbfc6be521e | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/01b11e37a6d2094e2b840265f75e01ff1c919fef | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2cde563e9b7a90d480e2a3cbc1dadb3af1c82ea8 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/88cc0a2e105d0ebc28031b087f9c07bfba40758e | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5208049c80e3b6b3999ac34f4e9ebc54a45a0d2b | riscv32 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3b07d7e0fe59641a80914b986aa84d5bcbfe400b | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2a02226a45f923db76954e329518ea190d421b96 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ded4ff2fc255f93126853dca9ed51fb77fb3225f | m68k | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/9e509c0327ea928772fc078edfef9e65af213614 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a6fc65ee72e8acc2a674aca12a973895c7efe128 | armeb | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/62408d4dd73d4f6e52ed4cad3388150b1577829b | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/44c1e5bfcff4613164b0510ac8d47ad4854ce2e5 | ORPH i586 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/6d63698419e0678b78aee1f4948ea3793456dd23 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/0498ca732f57378503f241c9ed8a4583810ada5e | i686 | putty-0.76 | NOK | http://autobuild.buildroot.net/results/55cc4355e7392001a99cedc8dc7cbde983d66089 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/05836c2aa27c055bb864040f810fd662d41b8524 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/855d97759530a932bc4e2ce10bba309fab2e729b | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/ac6a9734afaf6d0e888bb5841bda090ee65ae6be | powerpc64le | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/93bdc4c430e57a40f809c5bcfe89671fd249d10e | ORPH arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/9a34738ce663e66c87fa291101d1d0c834b0f203 | mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/2a3cee056070726ea77256e914200b18fed62c66 | Gitlab CI results for 2022-10-02 ================================ Detail of defconfig failures for 2022.05.3 ------------------------------------------ defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451240 | Detail of runtime-test failures for 2022.05.3 --------------------------------------------- runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451705 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451706 | ORPH TestLuaLuaSec | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451383 | ORPH TestPythonPy3Crossbar | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451444 | ORPH Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r6 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.0 | assimp | DISTRO | https://release-monitoring.org/project/06988 | 5.2.1 | 5.2.5 | ORPH asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.31 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.1 | brltty | DISTRO | https://release-monitoring.org/project/00220 | 6.4 | 6.5 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 5.19.1 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | checksec | DISTRO | https://release-monitoring.org/project/17677 | 2.5.0 | 2.6.0 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.1 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-filters | DISTRO | https://release-monitoring.org/project/05541 | 1.28.15 | 1.28.16 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.5.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | darkhttpd | DISTRO | https://release-monitoring.org/project/00391 | 1.13 | 1.14 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.22 | 1.15.0 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efibootmgr | DISTRO | https://release-monitoring.org/project/00663 | 17 | 18 | efivar | DISTRO | https://release-monitoring.org/project/00664 | 37 | 38 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.0 | ell | DISTRO | https://release-monitoring.org/project/17781 | 0.49 | 0.53 | ORPH empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.19 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.28 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.5 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.15 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.5.8 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.33 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.13 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fail2ban | DISTRO | https://release-monitoring.org/project/06602 | 0.11.2 | 1.0.1 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.33 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fluidsynth | DISTRO | https://release-monitoring.org/project/10437 | 2.2.9 | 2.3.0 | fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeipmi | DISTRO | https://release-monitoring.org/project/00848 | 1.6.9 | 1.6.10 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 3.92.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gesftpserver | DISTRO | https://release-monitoring.org/project/59393 | 1 | 2 | ORPH gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.37.3 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gmrender-resurrect | DISTRO | https://release-monitoring.org/project/21445 | 0.0.9 | 0.1 | gnuplot | DISTRO | https://release-monitoring.org/project/01216 | 5.4.4 | 5.4.5 | gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gnutls | DISTRO | https://release-monitoring.org/project/01221 | 3.7.7 | 3.7.8 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.0.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grep | DISTRO | https://release-monitoring.org/project/01251 | 3.7 | 3.8 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.2.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hdparm | DISTRO | https://release-monitoring.org/project/01304 | 9.63 | 9.65 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH htpdate | DISTRO | https://release-monitoring.org/project/132187 | 1.3.5 | 1.3.6 | hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.362 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.37 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-49 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | isl | DISTRO | https://release-monitoring.org/project/13286 | 0.24 | 0.25 | ORPH iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | iwd | DISTRO | https://release-monitoring.org/project/18380 | 1.25 | 1.30 | ORPH jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.24.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.0.4 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi | DISTRO | https://release-monitoring.org/project/20547 | 19.4-Matrix | 20.0a3-Nexus | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.0-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-jsonschemabuilder | DISTRO | https://release-monitoring.org/project/05511 | 19.4-Matrix | 20.0a3-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.5.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-texturepacker | DISTRO | https://release-monitoring.org/project/05511 | 19.4-Matrix | 20.0a3-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.6 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdnet | DISTRO | https://release-monitoring.org/project/06308 | 1.14 | 1.16.1 | ORPH libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.3 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.14 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.1 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.0 | libmaxminddb | DISTRO | https://release-monitoring.org/project/07470 | 1.6.0 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.11 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.12 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.0 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.7.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20220913 | live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.1 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.1 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lrzip | DISTRO | https://release-monitoring.org/project/01842 | 0.641 | 0.651 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.5 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH memtest86 | DISTRO | https://release-monitoring.org/project/01966 | 5.01 | 5.31b | mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.44.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | micropython | DISTRO | https://release-monitoring.org/project/10539 | 1.19 | 1.19.1 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.0.2 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.185 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.4 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221001 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.10.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.15 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 515.76 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ocf-linux | DISTRO | https://release-monitoring.org/project/21541 | 20120127 | 20171122 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+17 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.30 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004003 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.78 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.27 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.09.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.0.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.0 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.18.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.84 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.84 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.1 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.0a2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.27 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown | DISTRO | https://release-monitoring.org/project/03916 | 3.3.4 | 3.4.1 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.0 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.13.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 2.8.7 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.3 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.2.2 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.3 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220609.1 | 20220814.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 2.5.3 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 24.0.1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.1 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.9 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.4.1 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 1.4.41 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | qt6base | DISTRO | https://release-monitoring.org/project/07927 | 6.3.2 | 6.4.0 | qt6serialport | DISTRO | https://release-monitoring.org/project/07927 | 6.3.2 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.0 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.6.0 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rt-tests | DISTRO | https://release-monitoring.org/project/59450 | 2.3 | 2.4 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.6.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.42.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.7 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.2 | 0.29.3 | syslog-ng | DISTRO | https://release-monitoring.org/project/04930 | 3.37.1 | 3.38.1 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.0 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.07 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.5.20 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0453 | 9.0.0636 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.40 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.230 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.18 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.11 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 3.7.2 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.7 | 2.38.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 373 | ORPH xz | DISTRO | https://release-monitoring.org/project/05277 | 5.2.5 | 5.2.7 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zfs | DISTRO | https://release-monitoring.org/project/11706 | 2.1.4 | 2.1.5 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.05.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From peter at korsgaard.com Mon Oct 3 06:47:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 03 Oct 2022 08:47:33 +0200 Subject: [Buildroot] Buildroot 2022.08.1 released Message-ID: <87o7uttncq.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.08.1 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.08.1.tar.gz or http://buildroot.org/downloads/buildroot-2022.08.1.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.08.1 is a bugfix release, fixing a number of important / security related issues discovered since the 2022.08 release. - Security fixes for busybox, docker-engine, expat, git, heirloom-mailx, libconfuse, libxml2, mariadb, python3, tinyproxy, unbound, unzip, vim - Fixes for download/compilation/runtime/license issues in botan, docker-cli, haproxy, icu, imx-gpu-viv, libmdbx, libupnp, ltp-testsuite, m4, makedevs, mesa3d, meson, mosquitto, ncurses, openssh, pango, qlibc, qt5xmlpatterns, rtl8189es, rtl8723bu, rtl8723ds, rtl8812au-aircrack-ng, runc, sox, uacme, xtables-addons For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.08.1 Users of the affected packages are strongly encouraged to upgrade. Many thanks to all the people contributing to this release: git shortlog -sn 2022.08.. 11 Fabrice Fontaine 11 Giulio Benetti 5 Yann E. MORIN 4 James Hilliard 4 Lang Daniel 4 Luca Ceresoli 4 Peter Korsgaard 4 Thomas Petazzoni 3 Christian Stewart 3 Francois Perrad 2 Nicola Di Lieto 2 Quentin Schulz 1 Baruch Siach 1 Joachim Wiberg 1 Joel Stanley 1 Kyle Harding 1 Michael Klein 1 Peter Seiderer 1 Petr Vorel 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 3 06:49:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 3 Oct 2022 08:49:17 +0200 Subject: [Buildroot] [git commit] Update for 2022.08.1 Message-ID: <20221003065325.59A258680D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1648c2ec369b00c3beae353a1053961fe7d0e42d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard (cherry picked from commit 25d865996d1d9753fe7d4dfe39cf18c7e9f91224) [Peter: drop Makefile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 18 ++++++++++++++++++ support/misc/Vagrantfile | 2 +- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/CHANGES b/CHANGES index 357375c2de..ef58d17d89 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,21 @@ +2022.08.1, released October 2nd, 2022 + + Important / security related fixes. + + Updated/fixed packages: botan, busybox, docker-cli, + docker-engine, expat, git, haproxy, heirloom-mailx, icu, + imx-gpu-viv, libconfuse, libmdbx, libupnp, libxml2, + ltp-testsuite, m4, makedevs, mariadb, mesa3d, meson, + mosquitto, ncurses, openssh, pango, python3, qlibc, + qt5xmlpatterns, rtl8189es, rtl8723bu, rt8723ds, + rtl8812au-aircrack-ng, runc, sox, tinyproxy, uacme, unbound, + unzip, vim, xtables-addons + + Issues resolved (http://bugs.uclibc.org): + + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14921: wpewebkit build fails because of internal build order + 2022.08, released September 10th, 2022 Fixes all over the tree. diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index fb0f48215c..f558e52ca6 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.08' +RELEASE='2022.08.1' ### Change here for more memory/cores ### VM_MEMORY=2048 From peter at korsgaard.com Mon Oct 3 06:52:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 3 Oct 2022 08:52:43 +0200 Subject: [Buildroot] [git commit] docs/website: update for 2022.08.1 Message-ID: <20221003065325.653F1867B5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=84b29a39416012e316da70dc0ad18b5887521422 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/download.html | 18 +++++++++--------- docs/website/news.html | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+), 9 deletions(-) diff --git a/docs/website/download.html b/docs/website/download.html index b28c3a54d7..d1eeaba5ee 100644 --- a/docs/website/download.html +++ b/docs/website/download.html @@ -42,37 +42,37 @@
    -

    Latest stable release: 2022.08

    +

    Latest stable release: 2022.08.1

    - +
    - +
    -

    buildroot-2022.08.tar.gz

    -

    PGP signature

    +

    buildroot-2022.08.1.tar.gz

    +

    PGP signature

    - +
    - +
    -

    buildroot-2022.08.tar.xz

    -

    PGP signature

    +

    buildroot-2022.08.1.tar.xz

    +

    PGP signature

    https://bugs.busybox.net/attachment.cgi?id=9371&action=edit patch to fix this issue/bug For development, install to staging as well! -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Wed Oct 5 15:50:46 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Wed, 05 Oct 2022 15:50:46 +0000 Subject: [Buildroot] [Bug 15026] package/udisks: install to staging In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15026 Yann E. MORIN changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED CC| |yann.morin.1998 at free.fr Status|NEW |RESOLVED --- Comment #1 from Yann E. MORIN --- Hello, Thanks for your patch. As explained in the manual [0], we do not take patches from the bug tracker; instead can you submit it to the mailing list, please? [0] https://buildroot.org/downloads/manual/manual.html#submitting-patches Regards, Yann E. MORIN. -- You are receiving this mail because: You are on the CC list for the bug. From fontaine.fabrice at gmail.com Wed Oct 5 20:06:21 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 5 Oct 2022 22:06:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/liburiparser: bump to version 0.9.7 Message-ID: <20221005200621.229757-1-fontaine.fabrice@gmail.com> https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog Signed-off-by: Fabrice Fontaine --- package/liburiparser/liburiparser.hash | 2 +- package/liburiparser/liburiparser.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/liburiparser/liburiparser.hash b/package/liburiparser/liburiparser.hash index 8b40807541..73b4ec6867 100644 --- a/package/liburiparser/liburiparser.hash +++ b/package/liburiparser/liburiparser.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a288a06668528c19e85e38c508335938e1de6fdd4b8f2072401b4533fcebf644 uriparser-0.9.6.tar.xz +sha256 1ddae35cb3cc2c36e8199829d46f1c7f8b222e74a723fdae67ec8561e1ac5a39 uriparser-0.9.7.tar.xz sha256 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3 COPYING diff --git a/package/liburiparser/liburiparser.mk b/package/liburiparser/liburiparser.mk index c9903bd74f..6d25b1d9bb 100644 --- a/package/liburiparser/liburiparser.mk +++ b/package/liburiparser/liburiparser.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBURIPARSER_VERSION = 0.9.6 +LIBURIPARSER_VERSION = 0.9.7 LIBURIPARSER_SOURCE = uriparser-$(LIBURIPARSER_VERSION).tar.xz LIBURIPARSER_SITE = https://github.com/uriparser/uriparser/releases/download/uriparser-$(LIBURIPARSER_VERSION) LIBURIPARSER_LICENSE = BSD-3-Clause -- 2.35.1 From aduskett at gmail.com Wed Oct 5 21:21:47 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:47 -0700 Subject: [Buildroot] [PATCH 1/4] package/mender: bump version to 3.4.0 Message-ID: <20221005212150.1384370-1-aduskett@gmail.com> Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a year change. Signed-off-by: Adam Duskett --- package/mender/mender.hash | 6 +++--- package/mender/mender.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/mender/mender.hash b/package/mender/mender.hash index 7fee01cf1a..d563dc534b 100644 --- a/package/mender/mender.hash +++ b/package/mender/mender.hash @@ -1,12 +1,12 @@ # Locally computed: -sha256 9d8b2438e358dacde58c3692bd038ed9938392f1a526c49d919f73a2dff77eee mender-3.3.0.tar.gz +sha256 8a149b11b990beb7620b372023eec28df63cee6a1aa4132e88ecef554f080f72 mender-3.4.0.tar.gz # Vendor licenses # Generated with sed '/^[A-Za-z0-9_]/s/^/sha256 /' LIC_FILES_CHKSUM.sha256 # Apache-2.0 license. sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a vendor/github.com/mendersoftware/mender-artifact/LICENSE +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b vendor/github.com/mendersoftware/mender-artifact/LICENSE sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/github.com/minio/sha256-simd/LICENSE sha256 8f5d89b47d7a05a199b77b7e0f362dad391d451ebda4ef48ba11c50c071564c7 vendor/github.com/mendersoftware/progressbar/LICENSE @@ -42,4 +42,4 @@ sha256 08eab1118c80885fa1fa6a6dd7303f65a379fcb3733e063d20d1bbc2c76e6fa1 vendor sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 vendor/github.com/bmatsuo/lmdb-go/LICENSE.mdb.md # sha256 of all the vendor licenses combined -sha256 e6d8321e71be932e08b8923fe9e24e06a95c7e74a6b86e6f73696436ae0ea54f LIC_FILES_CHKSUM.sha256 +sha256 93d9db9b43097b174e362ac8f398aa9a37fcdde2974d0567b62bd6d1e0d22037 LIC_FILES_CHKSUM.sha256 diff --git a/package/mender/mender.mk b/package/mender/mender.mk index 5c3c593da6..724295f784 100644 --- a/package/mender/mender.mk +++ b/package/mender/mender.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_VERSION = 3.3.0 +MENDER_VERSION = 3.4.0 MENDER_SITE = $(call github,mendersoftware,mender,$(MENDER_VERSION)) MENDER_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, OLDAP-2.8 -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:48 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:48 -0700 Subject: [Buildroot] [PATCH 2/4] package/mender-connect: bump version to 2.1.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-2-aduskett@gmail.com> Signed-off-by: Adam Duskett --- package/mender-connect/mender-connect.hash | 2 +- package/mender-connect/mender-connect.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mender-connect/mender-connect.hash b/package/mender-connect/mender-connect.hash index 46f37f954b..da4ec5fbbd 100644 --- a/package/mender-connect/mender-connect.hash +++ b/package/mender-connect/mender-connect.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 6410bcd76cebd21e9f18fe5768928d67163e4bb2b6ae76d0e20815400d907657 mender-connect-2.0.2.tar.gz +sha256 96b81bb4c72eb8c1756febb94101c0dea5a6d4884591824e61a5f2509cd9ca9b mender-connect-2.1.0.tar.gz sha256 78b3954421ec6499c3f9735b96d52288574ae80c747416a52548d7f526f26e8c LIC_FILES_CHKSUM.sha256 # Vendor licenses diff --git a/package/mender-connect/mender-connect.mk b/package/mender-connect/mender-connect.mk index 1b0285cffc..36ddd5f7db 100644 --- a/package/mender-connect/mender-connect.mk +++ b/package/mender-connect/mender-connect.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_CONNECT_VERSION = 2.0.2 +MENDER_CONNECT_VERSION = 2.1.0 MENDER_CONNECT_SITE = $(call github,mendersoftware,mender-connect,$(MENDER_CONNECT_VERSION)) MENDER_CONNECT_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:49 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:49 -0700 Subject: [Buildroot] [PATCH 3/4] package/mender-artifact: bump version to 3.9.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-3-aduskett@gmail.com> Changes: New licenses: Apache 2.0: - vendor/github.com/mendersoftware/openssl/LICENSE BSD 3 Clause: - vendor/golang.org/x/crypto/LICENSE - vendor/golang.org/x/time/LICENSE mender-artifact now requires OpenSSL, and is incompatible with OpenSSL3. As such, the host-pkgconf and host-libopenssl packages are now dependencies to prevent linking errors against OpenSSL3 on newer distributions such as Fedora 35. Signed-off-by: Adam Duskett --- package/mender-artifact/Config.in.host | 1 + package/mender-artifact/mender-artifact.hash | 7 +++++-- package/mender-artifact/mender-artifact.mk | 16 +++++++++++++--- 3 files changed, 19 insertions(+), 5 deletions(-) diff --git a/package/mender-artifact/Config.in.host b/package/mender-artifact/Config.in.host index c7be0ed261..1879b4aa74 100644 --- a/package/mender-artifact/Config.in.host +++ b/package/mender-artifact/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MENDER_ARTIFACT bool "host mender-artifact" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_PKGCONF help The mender-artifact tool is a CLI implementation of the Mender artifacts library. diff --git a/package/mender-artifact/mender-artifact.hash b/package/mender-artifact/mender-artifact.hash index 8262e26bf0..58a8cc663d 100644 --- a/package/mender-artifact/mender-artifact.hash +++ b/package/mender-artifact/mender-artifact.hash @@ -1,6 +1,6 @@ # Locally computed: -sha256 d3ed68d8637195ff35de97b12c8fa148cebffb1ee0fd0d43909ec1643c0c296a mender-artifact-3.8.0.tar.gz -sha256 b8462a14975e30fb0dff14ed50e7563e833ccce13c2aa93f95386ffe877ed673 LIC_FILES_CHKSUM.sha256 +sha256 cb6d4da1bef47b5ddab311ffe5c7331073d6c98f2a8dac29ddced36feac29e5e mender-artifact-3.9.0.tar.gz +sha256 5635790313f33aea860583427e8e73792e99c5dfb947d4025c0102011564af50 LIC_FILES_CHKSUM.sha256 # License hash extracted from LIC_FILES_CHKSUM.sha256 using the # following command: @@ -22,6 +22,7 @@ sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd vendor sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/golang/groupcache/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/gopkg.in/square/go-jose.v2/LICENSE sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 vendor/github.com/oklog/run/LICENSE +sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE # # BSD 2 Clause licenses. @@ -44,6 +45,8 @@ sha256 fc0a2f71df4e8f047902da53d1f85301be43e0f360fc167057a2d04658ed2ba9 vendor sha256 4835612df0098ca95f8e7d9e3bffcb02358d435dbb38057c844c99d7f725eb20 vendor/google.golang.org/protobuf/LICENSE sha256 8778a9fc1eaffb03ab873caae251df2d224f6b5502be8777d3cd573a4dd43903 vendor/github.com/golang/protobuf/LICENSE sha256 b95218cd9607855a6536384c0262922b30a0c2bf56e4ced790240f3a3bac4722 vendor/github.com/googleapis/gax-go/v2/LICENSE +sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 vendor/golang.org/x/crypto/LICENSE +sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 vendor/golang.org/x/time/LICENSE sha256 f69f157b0be75da373605dbc8bbf142e8924ee82d8f44f11bcaf351335bf98cf vendor/github.com/golang/snappy/LICENSE sha256 dd26a7abddd02e2d0aba97805b31f248ef7835d9e10da289b22e3b8ab78b324d vendor/gopkg.in/square/go-jose.v2/json/LICENSE sha256 6a358d2540ca14048f02d366f23787c0a480157e58f058113f0e27168dd4e447 vendor/github.com/pierrec/lz4/LICENSE diff --git a/package/mender-artifact/mender-artifact.mk b/package/mender-artifact/mender-artifact.mk index 1031166f34..a5f79ea449 100644 --- a/package/mender-artifact/mender-artifact.mk +++ b/package/mender-artifact/mender-artifact.mk @@ -4,7 +4,7 @@ # ################################################################################ -HOST_MENDER_ARTIFACT_VERSION = 3.8.0 +HOST_MENDER_ARTIFACT_VERSION = 3.9.0 HOST_MENDER_ARTIFACT_SITE = $(call github,mendersoftware,mender-artifact,$(HOST_MENDER_ARTIFACT_VERSION)) HOST_MENDER_ARTIFACT_LICENSE = Apache2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, MPL-2.0 HOST_MENDER_ARTIFACT_LICENSE_FILES = \ @@ -23,6 +23,7 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/github.com/golang/groupcache/LICENSE \ vendor/gopkg.in/square/go-jose.v2/LICENSE \ vendor/github.com/oklog/run/LICENSE \ + vendor/github.com/mendersoftware/openssl/LICENSE \ vendor/github.com/pkg/errors/LICENSE \ vendor/github.com/pmezard/go-difflib/LICENSE \ vendor/golang.org/x/sys/LICENSE \ @@ -40,6 +41,8 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/google.golang.org/protobuf/LICENSE \ vendor/github.com/golang/protobuf/LICENSE \ vendor/github.com/googleapis/gax-go/v2/LICENSE \ + vendor/golang.org/x/crypto/LICENSE \ + vendor/golang.org/x/time/LICENSE \ vendor/github.com/golang/snappy/LICENSE \ vendor/gopkg.in/square/go-jose.v2/json/LICENSE \ vendor/github.com/pierrec/lz4/LICENSE \ @@ -84,7 +87,7 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/github.com/hashicorp/go-multierror/LICENSE \ vendor/github.com/hashicorp/golang-lru/LICENSE -HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz +HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz host-libopenssl host-pkgconf # By default, go will attempt to download needed modules before building, which # is not desirable. This behavior also causes permission issues when cleaning, @@ -92,7 +95,14 @@ HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz # includes the modules in the vendor directory, mod=vendor prevents the package # from downloading the go modules during the build process and prevents # permission issues when cleaning. -HOST_MENDER_ARTIFACT_GO_ENV = GOFLAGS="-mod=vendor" +# +# Mender-artifact requires OpenSSL, and is not yet compatible with OpenSSL3. +# Mender-artifact also uses pkgconf to find the OpenSSL library. +# Use host-pkgconf to force mender-artifact to use Buildroots host-openssl, as +# newer distributions, such as Fedora, are starting to use OpenSSL3. +HOST_MENDER_ARTIFACT_GO_ENV = \ + GOFLAGS="-mod=vendor" \ + PKG_CONFIG_PATH="$(HOST_DIR)/lib/pkgconfig" HOST_MENDER_ARTIFACT_LDFLAGS = -X github.com/mendersoftware/mender-artifact/cli.Version=$(HOST_MENDER_ARTIFACT_VERSION) -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:50 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:50 -0700 Subject: [Buildroot] [PATCH 4/4] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-4-aduskett@gmail.com> mender-grubenv no longer uses the mender_grubenv* directories, instead opting to put the mender_grubenv directories in a grub-mender-grubenv top-level directory. While there is a legacy install mode which keeps the two separate directories, it is better to move forward and rip the bandaid off before it becomes too painful to update in the future if the legacy option is removed entirely. - Update the license file sha256 sum due to a year change. - mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied manually to grub.cfg. - BOOT_DIR replaces ENV_DIR in the Makefile. - The sleep grub2 module is now a requirement. - /etc/mender_grubenv.config file must be present on the system for the grub-mender-grubenv-{print,set} scripts to work properly. In addition to the above changes, update the mender example board file to work with the updated mender-grubenv version. Signed-off-by: Adam Duskett --- board/mender/x86_64/genimage-efi.cfg | 3 +++ configs/mender_x86_64_efi_defconfig | 2 +- package/mender-grubenv/mender-grubenv.hash | 4 ++-- package/mender-grubenv/mender-grubenv.mk | 22 +++++++++++++++------- 4 files changed, 21 insertions(+), 10 deletions(-) diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg index 10cefe2380..4ed064c498 100644 --- a/board/mender/x86_64/genimage-efi.cfg +++ b/board/mender/x86_64/genimage-efi.cfg @@ -3,6 +3,9 @@ image efi-part.vfat { file EFI { image = "efi-part/EFI" } + file grub-mender-grubenv { + image = "efi-part/grub-mender-grubenv" + } file bzImage { image = "bzImage" } diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 6919a60c90..02081035ff 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -19,7 +19,7 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_X86_64_EFI=y # Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES -BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp" +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep" BR2_TARGET_GRUB2_INSTALL_TOOLS=y # Required tools to create a mender image diff --git a/package/mender-grubenv/mender-grubenv.hash b/package/mender-grubenv/mender-grubenv.hash index 3be5f51a9e..193bff073b 100644 --- a/package/mender-grubenv/mender-grubenv.hash +++ b/package/mender-grubenv/mender-grubenv.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00a574d2bed8d54ba6739700da789a420a02de900df56dd2cfbe0df460a98dca mender-grubenv-1a7db967495bbe8be53b7a69dcb42822f39d9a74.tar.gz -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a LICENSE +sha256 b7a08eb3d996afb38c1a4f7c51b7eb44aec6197ff713ce75e4f39d5b448cfc82 mender-grubenv-2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b.tar.gz +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE diff --git a/package/mender-grubenv/mender-grubenv.mk b/package/mender-grubenv/mender-grubenv.mk index 9d5be8d8f4..8679ad9236 100644 --- a/package/mender-grubenv/mender-grubenv.mk +++ b/package/mender-grubenv/mender-grubenv.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_GRUBENV_VERSION = 1a7db967495bbe8be53b7a69dcb42822f39d9a74 +MENDER_GRUBENV_VERSION = 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b MENDER_GRUBENV_SITE = $(call github,mendersoftware,grub-mender-grubenv,$(MENDER_GRUBENV_VERSION)) MENDER_GRUBENV_LICENSE = Apache-2.0 MENDER_GRUBENV_LICENSE_FILES = LICENSE @@ -30,13 +30,15 @@ MENDER_GRUBENV_MODULES_MISSING_PC = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_PC)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/grub +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/grub define MENDER_GRUBENV_INSTALL_I386_CFG mkdir -p $(BINARIES_DIR)/boot-part/grub + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/grub/grub.cfg cp -dpfr $(TARGET_DIR)/boot/grub/grub.cfg \ - $(TARGET_DIR)/boot/grub/mender_grubenv* \ - $(BINARIES_DIR)/boot-part/grub + $(TARGET_DIR)/boot/grub/grub-mender-grubenv \ + $(BINARIES_DIR)/boot-part/ endef endif # BR2_TARGET_GRUB2_HAS_LEGACY_BOOT @@ -45,13 +47,16 @@ MENDER_GRUBENV_MODULES_MISSING_EFI = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/EFI/BOOT +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/EFI/BOOT define MENDER_GRUBENV_INSTALL_EFI_CFG mkdir -p $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg \ - $(TARGET_DIR)/boot/EFI/BOOT/mender_grubenv* \ $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub-mender-grubenv \ + $(BINARIES_DIR)/efi-part/ endef endif # BR2_TARGET_GRUB2_HAS_EFI_BOOT @@ -75,7 +80,10 @@ define MENDER_GRUBENV_BUILD_CMDS endef define MENDER_GRUBENV_INSTALL_TARGET_CMDS - $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install + $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) \ + install install-boot-env + # The grub-mender-grubenv-* utilities use this file to function. + echo 'ENV_DIR=/boot/grub-mender-grubenv' > $(TARGET_DIR)/etc/mender_grubenv.config endef define MENDER_GRUBENV_INSTALL_IMAGES_CMDS -- 2.37.3 From james.hilliard1 at gmail.com Wed Oct 5 23:22:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 5 Oct 2022 17:22:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/meson: bump to version 0.63.3 Message-ID: <20221005232257.2625525-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING -- 2.34.1 From cps at microplex.com Wed Oct 5 23:28:03 2022 From: cps at microplex.com (Cem Sezer) Date: Wed, 5 Oct 2022 16:28:03 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed Message-ID: Hello, On a new build, when I run wpa_supplicant, it seems to only allow TLSv1.0. When I specify the supplicant to use a newer version of TLS in wpa_supplicant.conf under phase1, it fails and the debug output says "TLSv1: No TLS version allowed". Am I missing something? When I don't specify, it defaults to using TLSv1.0. I included all parts of wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl version 1.1.1.q Thanks in advance, Cem -------------- next part -------------- An HTML attachment was scrubbed... URL: From cps at microplex.com Thu Oct 6 01:11:11 2022 From: cps at microplex.com (Cem Sezer) Date: Wed, 5 Oct 2022 18:11:11 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed In-Reply-To: References: Message-ID: Hello, I updated to the newly released buildroot-2022.08.01 released a few days ago and it fixed the TLSv1.0 issue and it started using TLSv1.2. However, now I get the error "EAP-PEAP: TLS processing failed". Additionally, my radius server outputs "eap_peap: ERROR: TLS Alert read:fatal:bad certificate".Not sure how to proceed here. Thanks, Cem On Wed, Oct 5, 2022 at 4:28 PM Cem Sezer wrote: > Hello, > > On a new build, when I run wpa_supplicant, it seems to only allow TLSv1.0. > When I specify the supplicant to use a newer version of TLS in > wpa_supplicant.conf under phase1, it fails and the debug output says > "TLSv1: No TLS version allowed". Am I missing something? When I don't > specify, it defaults to using TLSv1.0. I included all parts of > wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using > buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl > version 1.1.1.q > > Thanks in advance, > > Cem > -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Thu Oct 6 06:41:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 06 Oct 2022 06:41:45 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-05 Message-ID: <20221006064151.B221D61012@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-05 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 1 | 0 | 5 | 2022.05.x | 19 | 11 | 0 | 30 | 2022.08.x | 5 | 10 | 0 | 15 | master | 180 | 395 | 0 | 575 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 31 glibc-2.36-44-g2628500f5dff... | 24 host-binutils-2.38 | 16 autofs-5.1.8 | 15 host-f2fs-tools-1.15.0 | 13 host-sentry-cli-1.59.0 | 12 host-go-1.19.1 | 11 sysvinit-2.99 | 11 host-cmake-3.22.3 | 10 host-pahole-73383b3a39afe86... | 10 host-gcc-initial-11.3.0 | 9 igd2-for-linux-2.1 | 9 libarchive-3.6.1 | 9 package/acpica/acpica.mk:40... | 9 linux-5.17.15 | 8 btrfs-progs-5.16.2 | 6 hdparm-9.63 | 6 host-rust-1.64.0 | 6 lxc-4.0.12 | 6 gensio-2.5.5 | 5 libglib2-2.72.3 | 5 systemd-250.4 | 5 unknown | 5 acpica-legal-info | 4 casync-4ad9bcb94bc83ff36cfc... | 4 gobject-introspection-1.72.0 | 4 tealdeer-1.5.0 | 4 uclibc-1.0.42 | 4 dahdi-linux-5c840cf43838e06... | 3 elfutils-0.186 | 3 gerbera-1.10.0 | 3 host-binutils-2.39 | 3 host-gcc-final-10.4.0 | 3 host-gdb-arc-2020.09-releas... | 3 host-lzo-2.10 | 3 linux-5.10.115-cip7 | 3 perl-5.34.1 | 3 quickjs-2021-03-27 | 3 apcupsd-3.14.14 | 2 boost-1.80.0 | 2 brltty-6.4 | 2 dieharder-3.31.1 | 2 efivar-37 | 2 fdk-aac-2.0.2 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 host-gcc-final-11.3.0 | 2 host-gcc-initial-10.4.0 | 2 host-gmp-6.2.1 | 2 host-python3-3.10.7 | 2 libglvnd-1.4.0 | 2 libgpg-error-1.45 | 2 memcached-1.6.16 | 2 musl-1.2.3 | 2 toolchain-external-codescap... | 2 wtfutil-0.41.0 | 2 /home/buildroot/autobuild/i... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.1 | 1 bcg729-1.1.1 | 1 binutils-2.38 | 1 bitcoin-0.21.2 | 1 botan-2.19.2 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 cjson-1.7.15 | 1 containerd-1.6.8 | 1 crucible-2022.05.25 | 1 dash-0.5.11.5 | 1 dropbear-2022.82 | 1 edk2-edk2-stable202102 | 1 faad2-2.10.0 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/axfs/axfs.mk:32: /home/a... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gsl-2.6 | 1 heirloom-mailx-12.5 | 1 host-binutils-2.37 | 1 host-delve-1.8.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-initial-12.2.0 | 1 host-gcc-initial-arc-2020.0... | 1 host-libcap-2.65 | 1 host-pcre-8.45 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 jpeg-turbo-2.1.4 | 1 json-c-0.16 | 1 libabseil-cpp-20220623.1 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgta-1.2.1 | 1 libnl-3.6.0 | 1 libnss-3.83 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 libselinux-3.3 | 1 libudfread-1.1.2 | 1 linux-headers-5.17.15 | 1 lttng-tools-2.13.2 | 1 mxs-bootlets-10.12.01 | 1 ntp-4.2.8p15 | 1 ntpsec-1_2_1 | 1 ocf-linux-20120127 | 1 opencv4-4.6.0 | 1 openvmtools-11.3.5-18557794 | 1 procps-ng-3.3.17 | 1 python-numpy-1.21.2 | 1 python3-3.10.7 | 1 qt-webkit-kiosk-a7720e50f2b... | 1 rtl8189es-39c17661136da48f8... | 1 rtty-7.4.0 | 1 sdl-1.2.15 | 1 stella-6.7 | 1 sysklogd-2.4.4 | 1 valgrind-3.19.0 | 1 wavemon-0.9.4 | 1 wolfssl-5.5.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/3cd106b5b52b011aae0759f57567bfcbd22c68df | nios2 | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/9d9479f30d1261a3867230cff73182132cff6fd6 | mips | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/e9bc2a3a206576f59331b6609752735e5bee492d | aarch64_be | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/95a94787c556bbec4f5f994581092e03066128d7 | powerpc64 | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/d048b7d5570651613219af5f1791459af318d445 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/91609390ce820fdcef36890095a619806284b110 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/50c2669055f103b1e003b35ffa6cdcbf628ac70f | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/8501843aad0e70ad6d5dade6060b5e248c3b709a | mipsel | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/0b1ef0e272235600f5e9bb9e4825568def354906 | ORPH sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2fde5215729db02dcb969229b43f2a0d7b727ce0 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5f998022cb0347defc9a6528f902d0803f948949 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6c15e85848739c148a2dce7a34b1cd4872f1fe5a | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9ccd1ea55e60d08bc39f3a7beb9d110e65d92ac5 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d85284c1ab2ea75c0e30f6873f27038c96a75180 | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/797794e17cedd3417a792390866bb079e7c00840 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/236ee8b0a7c94a2e24b730ac22036acc4609b137 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9a810d4606cc00765240e425a70ef82cc179e159 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/884952100a4328360b93623832fa6c6ffb096ea7 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce5db4faf547a7c0e462514d3686c803a0e113fb | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/30622b9468f5e53096e308ce8ccf796ab26fa9aa | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ec0060c8e3285038860792b99e3a43cc05204682 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/af924276c6f8c9b9a72a5b0505f55e64508600ff | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d6fb25cb565c39cc99212556c4fa653484b9cfce | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce423da208c3e26d8b4cae7f62fa93e6339f3cb2 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/6016f0705531499a89e1415409f258f8d1b9e2f7 | mipsel | binutils-2.38 | NOK | http://autobuild.buildroot.net/results/39cf94c193f3d8c2899a7dc71d51761968f4e9db | aarch64 | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/03495fd7b2a67a6ab40b55bc8e09f6c543f7965d | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/5f713e509bccc72320a9babc95d873c8808e5331 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/d20e1553dee6b89df5fef063b0bfd6295be1ca12 | sparc64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/4aafab65ab964beaca144617bfb4949884537305 | ORPH powerpc64le | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/1a7169f683df11442122201fa0db5efd00de0e28 | mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/d7f68b6570bf1a1e3012e8bfa017b23f3fa073e0 | aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e32ebf1c13e83d30af00bb818d04602c923b6e47 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9f4089a5aff43327e7715e3503af0b4d679ac0fc | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/96ba04fc28908f0dc48ab4878c157e4bd44ddca7 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/801872b8e92ded6695b3fdf4f6ef6bbba1e41e1c | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0a489651e3a6d5d022f1ae5d10039833cac63e85 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd6bb0811fbe423c9423476f88c0fe008cbf1006 | ORPH or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/8d7d3ec9464c0e0b7595c5d583ef9e02fb463e75 | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/ee606607992eb9ac93206ba57f8f70caf717033b | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/81b921ef5561479ac5a1e6cca102c20549d91296 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5ec4d65da580feb37759aad5dd47a0a2a8c8892c | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/992e349152823acc729bfbd1b4c2d93b945920e7 | mips64 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/38a41214af0422f4cb7e87f7ba1b59991772ed4e | ORPH riscv64 | cjson-1.7.15 | NOK | http://autobuild.buildroot.net/results/8d09b65eb15026caa80fcb1069fa75ff178ca347 | s390x | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/055afb8f34f99d0171f81640e362deb88a501fd4 | aarch64 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/051c06845046054094614f7825309a5eac472fb4 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/958ab2ed8e165b78db79488f2fc2e54facccd7a4 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb6da040ef5af1a689c0a17a31f1aba7f5902235 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e310ff84e73146ea0e1b2837207c873a670a7d1a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/257241273359cb65e15cbe8fdeca56c3ebbcd98a | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb08a3db11ce5b44eed2a9c6e55e52fee63fea7 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3fc492b6a6f3b3033ef774e126d409fb067b0625 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/264d56ced51821da3a023a2e9b6c7049c5161249 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d92a37a91ecc8a8345a9420a2daba8ce1a056f33 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ba424496d4d53fec21ae0b6451bb92edce16874a | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6b66ce4884a467bd57ebf418d9260adad2d5e231 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/83d3a391c918d87c51aabf8b602c2725f9f82df3 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c2d4bfa3b1641b104476aceb78be6c6e0a1ad38 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d872f7d5fbdfa32b557d90e26e023e51c99ce739 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1b75d4200b9d98844dc5580b0796888efb89fb45 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/702a82b963915249de51325a9ea8dde95fbef9b9 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4f9f8899f427736a1106501860eecee31fcbab91 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5ef4d5e4f047e599619e0e0602ae6a07b3d49caf | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0bc8dea0cca5852ecc717be87157d24f44f8886 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1ebcb38dbcfced98c5deea3c2a6a71cbaee8b7e0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c01e5eaf8c06655616a262596fbe450c75a63959 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/596b9b6b5b01f3fbdb1edb3da55f58bb46083af2 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/88a79b26efb0c484bb872861545adab60f95d1cc | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/98b556a61b7870eaf1b4c107067951836bee0856 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3738fa596e02b0062d91e8adb4b6e833d222c296 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/33555158e68969659803f6b1e0c7b388dba31a9f | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c3c94516d67e522835d3d0351e2d968a8d2ee4c6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ab186e07284c13ad156ee91a356f457af1309cd1 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3f3313946e0def8220070cb855034c5b443adb43 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f0812048a9a8321a9e4411f35c9d908baf6f5ea6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a6b24011bb92a6615687038a34f7864dff98376e | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6a4ad730f72f93746ba3d37ee84bb789ff70529e | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/712ab4a6f02e3c3ccd3e30015890cbcb0ecfc7e0 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/61b4d165ba40709512133d858abcf002e6d38162 | aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cf94d1fdd86e410d881bf6a1fcc84c7551800e87 | microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b9d0ff1622015a7274d35d1a6cca79194dba4481 | ORPH microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/dce071b4364184d73c3e9b8e5993f627b7c1c7b8 | microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/222ede270a1221b991065671a97e6a913d78fe68 | or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/6a76f2e69026e5fb4199999dbc36f7d98f6e6591 | aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/7ae67075cbf52b9d63693ee1d6d13b69b8a0bf36 | i486 | efivar-37 | NOK | http://autobuild.buildroot.net/results/d108dfab0b34b6454c3b49d9d038ae15d9aed85b | mips64el | efivar-37 | NOK | http://autobuild.buildroot.net/results/c165f6020f5ef6c8f566546358b136f24175ee9d | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/ebb72edcb04af2ea3380bbe2eeb9ec7bb242c117 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8ad6e1d338b4c1867350928933c527a3ae10ddf4 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/17fd3ea7eba6d63be699b28d2e07df717d26a036 | ORPH sh4a | faad2-2.10.0 | NOK | http://autobuild.buildroot.net/results/9ce3dc547587357a849372813c12aa1c5fe4e81a | x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/a75db18ef35c05567a969ef02f890a1cbb0283d7 | sh4 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/4cf1a0ea0b5737a1bb9a70c6b8aad38c258139da | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/602421847a0a635b619aa589858b247f22a7fd66 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/3785c36781adea77a6c0a2d68353ca29e856cab8 | mips64 | fs/axfs/axfs.mk:32: /home/a... | NOK | http://autobuild.buildroot.net/results/eda3e07f289f9473719bea7aaa40b8bd963d8d32 | s390x | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/8abd7312ced88c0d4778b88b1143cd80dc0e52a0 | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/04eac64d1f22ffa0e5deb9bd49325b04335aadd3 | aarch64_be | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/4d330201948a5ea0418ae2c0296258f4e58b7fb6 | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/4afc11ac62a19a4bad18132675e1245a009f9e76 | arc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/89c5b0e3019c3a28e56d188639d6841b8a7cb69e | aarch64_be | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/33e562e72ea8a0727e0606637bd15e14aeb1effc | s390x | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/0f7a45e7509cd18abacfe180bd0dbc7faa671e74 | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/44e51c5f4734ff19955ee4ca5fb3aa5d35588f67 | sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5f5cf0c17efa99d698d1392e3c370ab130527f11 | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/b3c47d7f5f15ec7e446e94c1980ce2740eb38492 | sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a9374a01bb51b57379b3fddc68817c1214b07313 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/75f47c04d17291649e819419b7c51f9ec1308c1a | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e92fcfadc34eda383da986250424ba590d076024 | mips64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/2e67a53c75592b66e87dac67bec81c2e168fe28a | sh4 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9c083b6d08a7f733f391a7a62e6a049624d676ef | mips64el | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dd6d4cac1501efd4b5c68f8bffcbd5d786fe9bee | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/283ab0ab172457e534f03cdcc7940268989d59dd | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8cb54ac34109d415985d43c28f603a0cb4af3062 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f39548293d79692c41ca1beb56da579e78846651 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86792fb815231e22465b67c1af9c524e92aa2cbf | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30e9fd7b564a5305f5200b09b5ca0da7e23ebea5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faf901a7b49beb845f571cb06759ce389e8d17dc | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a79a932fd8c9c3079c60c0d992702460ad0d5bf3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f9df5e70f12ba1d7dab09f53ec1a33e4a4cca5d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cb38cd80024a46cb09e721082d6eca3f8aaafc7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d5d3e2feee687f2b80495ca42a8eda39ca35052 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/871bc2a7b9bee02a678e595af4a443def78a7887 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbbcb4c096e31142f5aac855d34aff670513fbdf | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86c43289074dc4cf17d30cbfc5b45fd31ca7cc82 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c01f817cd28b46df17e137642447f9e17172336a | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cb726b77ae54671c4229debba75e1243809328c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9497818cc0dfdf14964b7a52a091b10b4f6b66a6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32e138ee90206fd3320730c1466479e6d5eac10d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76899407bb0410d657754ed373ad16b0b4088a80 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1b45e2bbd31e41238cfb4c8e3baffb59f48b6555 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d5c9e8debe66582eaaa79179941b6a46852de35 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cddf14ede013861d752472f1ca67484dd9cad1b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aab1eb7615c99bf819ca3aac5d8281acf3aa5268 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d568e967bdceaf441970d3d27ad8d62d12a222e5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7678744c76463b27e00974a8d13785dee46ae7f | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/7612c3cc3d983f9665c8d839b17772f7772d32c0 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/3efbe245d56fc3d654368c16af6297a637c56c2b | ORPH mipsel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c44bcfdb3479ad39451490bb61cbbcef250372a7 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/41e113fbae4284437d5f0a8b778d31193583d718 | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6b40206b6296e3d8869caa09d0e4039fe598b4a4 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/e5aa8dac401368587b0c007e405d3f64f3bd65d0 | ORPH s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/2ffb3b2a3a306a9da5058a7a43cf0b09a7ea1881 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/a9ecde22c5702139f9549217c5dda8671d0636e8 | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/92d5c48af045c5f42a2ea891d793894334fde13a | riscv32 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b2fb16195dfad3e37d1a4a8308e5710ee24d88a9 | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b844dc1dfb999d03771199a52d38d2069ec14773 | sparc64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d86e612cdb5e9ef1a9f1d88f2516e61497d5af4f | sh4aeb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/14ba95ac73b7e12b8948a3b33a1a57f660e54fc3 | sh4 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/936d756a66f42cf28314a129725016b961103dad | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/55b1fc81dd31c44728f0e2e21330a207a28fd441 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b070316213b0e99d66042d8b39c3440e23f6bf16 | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/73d7c61014ee433b3ac6f0055ec7ef97ff349f8e | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f116ec75f8de0e63ea01de32e33cc77846f8e79d | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9ca46406235c24416e48f117408ee607c88bc2b5 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/344706adf3362212254029177235030e5454a402 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a3d96ba3e7966f2439a06a7742143f499e71a1d1 | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e3a61a7983faa4eae771969488a5a9375b927dc3 | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/db089c1d3d896d7515eef90e8ca50f86a8474640 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/baea360c9ea5b8d7f3c7290dccc58ffad2496baa | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6fedaf50a4b8a0c74fb684e534f1c370df153fc4 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e4cf134ee15748ef036f6f4895733066210356aa | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ae52e74e781b7d55169a07bd7ee332a259f6e6b6 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c6326f9607d71e3b7e203dda0f963216fd84c36 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3f10ca9f9e5ad3c35262a0bdf30a7c8a040a48c1 | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ffee2f749f37b6675076bb285a8759c586922290 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/79cd053b0245b5f89b88135b2997e7d0ed6c30f7 | arc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/3a97084d02ff3afde5a64c36c5477cacf1f5b07c | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/22c1794bb8f87c4433712e8632d90694af8e8e8d | or1k | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/b073b6db135a1457e0eef6260b83c09beaaa86ae | powerpc64le | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/5ac026553cad49a3ada3aa48fe8048f3d3d35015 | microblaze | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/57b7f62a444c95ea33c36a43ba3f77aaaaa983dd | arceb | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/58807d4717f692a0e318c26f5545dba49eb4e9b6 | aarch64_be | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/b3f319065ee50f23f90217dc13e8c92a8630d8cb | or1k | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/f93ead85280ffb034233a5fa416c8481f7b0083e | aarch64 | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/3805fd1886b7b26533e82ea340d1ef42493bd469 | powerpc64le | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/d1c6a5295551309ded20c3593e11afd517eb2cf3 | arceb | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/47e87d7826872f4bf84c44e73614a93d4fcf70c0 | mips64 | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/7c013471eab5c61dcc61cad559e5232645777b10 | arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/c1ab0265d41c569231d41262e4595b2c8630d1ac | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/83c51ee6853e99bf63b513aff2f92fece1a2894b | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0054da2e806673ea3373bad02ef7409564b8accf | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/10dd74f1ca995257186a2aea58338274158903d7 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/accfde92379d5f3c6b7cab4d05049129754918fd | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1881008d9a52dc2fbdacc6082d33a37d3b630311 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6e3bfbaaa138ec6c916924d93707fa7732bf96d9 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0a58d391a62d16c32efbb9ca58e0437d04ccb6ae | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3bfbc270c1b6c0426d1b21e9c933a080b15860e7 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3d52ebee93789036e9bd75fbd24e07ccacffdd1 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0ab13b7715fe8b47b21d2e1101f93e225c48d50f | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b0c0659268d53783f276d1ba24b19dc2480aa848 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ff1603cc89f1b1968f41787210ad387ba5861fa8 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/260ff1f54c22388e26f411779aade2c3a75a5471 | aarch64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/962ae0a976727581a6a4c6cba91819a9ca0ed9fa | mipsel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e965fbc043a76fdc04b796909807f2c0ada1bd4 | mips64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/007c8201a08c39206110f1e00d4c924bbfe61c03 | mipsel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/85c0982cc5151a8e26f9cb1aa929ad4c50c0f333 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6584e5a0f8d39b4df3b839dad21b0b4b8aec4d2c | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/35ba3a8f4ee8c004a8c211681d8bf0c17a0d6131 | powerpc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/17a527c54d6ee4ae51c325a3879a80ad9bac45b1 | sparc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/88069002a31bbb02bd2232d091105b7452d5000c | sh4a | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4931729f33ca988f069372800b1d8e729e07d2c7 | riscv64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/307dead51de7baa89fcb9cf3bda984775dee4fab | aarch64_be | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b3e4f05451a6afad4d8a7509aad0545f316d001 | xtensa | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/89b969ef741f9df1bfa8fb5deda9e87c7b6f4448 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ffa842fa7d687e1894a9115b46273be054ea2f8f | mips64el | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f18568987e6458d824741b8275a6894b886d8556 | m68k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/31cde30a585081af30d00e0c050c7982a3c217ee | s390x | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/06c9111a8229a5f23e4427e80152e10e25721d90 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a087053a4fdca75beccf8b769ed998ee9d424f8 | or1k | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/f5b9a71bf79b2d8970fab10cb1039678b696459a | arc | host-gcc-initial-arc-2020.0... | NOK | http://autobuild.buildroot.net/results/49f70eb744dde01718d3351fb906bc3a6b1d24e2 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/34987decdc8942e69a5bee5cd361483d579d5b15 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/d3d4c1746c63ddb39cc8174bef12f39cdd746d30 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/c352be4e2f288a9726c840120d38e9f43d4c7d80 | ORPH microblaze | host-gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/0d83dd85b0e1ee9e22e872571603499be964d439 | ORPH microblazeel | host-gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a2e8c3cb5d4f6e1c457fc887effb9be789a8d75c | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fdb2dc415c0851dadb31648e08d12d21e9684acd | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fc51949ef931284f31ac8c7e0b512eb3816a47e9 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/327c4f310ac8022ecdbb0f1984afc1d8663c31c5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dee70d0a06fd04f8f9b15f7f29f2205376eebdc9 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5f3239859c73011b5daf9e5fb073b3ab423e16c2 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ea70d95f8413a399455cb2f6e0384dad08c1a2ac | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a85ce4fb8a9e57f8641a849c9babe50d8b3a5132 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6e3467346c622df588fc0ffbdabff91ba2a21e09 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2390e7ad74639d9390503f39568b8eee3101ff75 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3fd4389df929030fb5f6fd029a249826b4d2321e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/056a0ad46ad84555663159f9ea50e29802af58e0 | sh4a | host-libcap-2.65 | NOK | http://autobuild.buildroot.net/results/f65d611a4774d7e51b391e94699f8cd6c387c42b | m68k | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/88563315d34568a8218034d366c45b9896e969dd | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/a76e968e14ad0b8d2b5c89cb8d2bd870f3676885 | ORPH sparc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7b5ecb7ac144b1b11db55d32d7c0257ae1b0028c | ORPH mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e9f759ea0ec27dd08f993ce69cd101b3b0f97a6e | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a3c2c9f787b2b8d5fcef720abb35169647df3222 | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a35e557446915344f887f271e5bc109c1add4ed6 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4fcb2392dc9497bad9a50d050c9158a7c9e6c761 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/815cf472c5a583b6a24188f6883bd29afb497896 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74b9eb06edad89f9e9092d84d6bff5ea1c8b6d78 | i586 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/45102b9fbd5d393922ab9b10a9547d4a659f3ff2 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/85495f89fc827ef33c5aa6bc96e66b57fd7c8b9f | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/71392437a1e4d229a6c3098dd31f190320a40268 | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b1b6c4a1677e87f2f88b62a97743226dbe384468 | sh4 | host-pcre-8.45 | NOK | http://autobuild.buildroot.net/results/682b1308f7330238cf935f7ea3c26634efcf3c9f | ORPH microblazeel | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/788e3bd806ed73be39c9257e0d0852f0060b8524 | x86_64 | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/1f741e37553f527a2cc4bff5f9c7959e9b3be19c | aarch64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/c7feef14ac5569967c45d2d7ff2c214b35d71d8c | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/2cb104189329e2bc535433144c27a2b1de1e1a5b | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bb49a204c39911afdb130a1b61c14fe3d87c56e3 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6380da5275e90edee616bed290434fb656a80917 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9c6058aa13664e0445b025dc357c5ad121f8ab7d | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/190b000375770bc9aadfad1a9ef9b5baa38b8802 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/92b326e996b357c7fbbd69ae6e9a3b6b848dd413 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d98618eb5560c9bdb8d715f4fd43abcd8a211ac2 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d85e82dce1f4877d699b0e3c81f3cb21b48a35c | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6361e9b2d59535898ca6525f171a4bf2e88d94ac | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/32912d94bcba126e95495ac1259ef26dd0a25014 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1eab5beadd0cfd6576dd90d9a165fe7f985db683 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f881b59f3f7eddb1fe38cce6b891627293f13208 | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2567d82fe0e28916628e7f4ba0db4c19a630e092 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d0e7fe874ff23341b7b7203a6e258de9ffc472fe | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5c1ec0f64ee7fe4e515b4b1ac2721bdb7ecd300a | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6c2bdcf91ac43d346b55e7a9858bb46eadca576a | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c80469b5efc88877287a5bb13d3bce4ed712f20 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2e1b787ac66493c3e3d2b6010677c8cd62fb1b5f | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/4cdbe8bb21618fe02d10e5fa73deb0f80a373cb1 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fffa25ef13b1bdc32484ced148317bc8449a0fd2 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b1e335563fcf5a5fb83e2a23d146f1412c044095 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/edfafc687b34cbec8d49d56a48f480e0046ec54a | m68k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f70bd078919e2cf4ff8fe901cc8d24ff18a01efe | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/676be29db95925188a161eaea7a1141709ae77a6 | i586 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4e9973bab6596debe0ba6976a6b6db26c5d258dc | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/997a6151b7cf0cc1987345a03a1b94bc626e6dec | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/212db3867dba5281f0944c5c7070e68e86a23f30 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f5a0022eeca10240fc233ee09b1364870b045753 | or1k | jpeg-turbo-2.1.4 | NOK | http://autobuild.buildroot.net/results/56fc8b39b297a683042292aa97640ed577d6b2bd | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/61f464d737ad44a3e606f82375072dfb7a631684 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/40594321f7337a1d0b7248670675721b9f82e4bf | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5ba807e1cd103b8b27b4f0848944af40253cccd4 | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/833cf56317799782c08f14c94de51d7e0817fed8 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f79ee8c5325ff61dff0ac81c3a1c36a89aab9c19 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/30494cf147a90387c7557213b0cd53380ea5a24b | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dd5efc4e45584fd42e3920523b08106fd52cb6d9 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3091f097b53502d54b9331c6ca413ddd3f7ac3f1 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/10306a333cd623d2c3369c72e3aa4f92db3e3268 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2c1fc943883bd787dda371ddf0ec9fc00116c3d8 | sh4 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/02dcd31c328fb399c4d26ac521adba9e870966cd | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/869cd350387bfdee4294c0af56c164076bea931c | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dac2abeab4ab487b289825f59944b9a28e663539 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c4497773604d15107eaefa4c5c59570cf06ca29c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f605619ed72c2ca240113ccd75a8ba3c32100d16 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cf8f70d04b5c132abdc3c9936a4799006fab6490 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e79b8dcd7cfd80e8812f3b2d12d1ff467341ad91 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/fa81249d99edb5d950dbd83788360c86596a5d11 | m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/d9ddf894ad703a8ece18fde6fdd4eecc237e9d17 | ORPH m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/1b8f4366c7302dbf68bdd6e5ff13666bd5bd7df2 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/562ea0e5fbf65463f7b9e4dbfc11429262ac56b8 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/a3d4560837a4aa6ad23721b701674f0e8a284d00 | ORPH riscv64 | libgta-1.2.1 | NOK | http://autobuild.buildroot.net/results/626820909061252015522835bc13e94d560b9510 | mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/7bf57a632aae460dbfc5982cee12d524f0c645f5 | ORPH microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5ff90b65dd8dac7c1ae148038d19c9fdd70f5ef2 | s390x | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/f47e5bb15e51870afa8f4a84aca5e4052250f577 | or1k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/b41a0cdf2dc693b923802b12ae208e3319edda2c | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/79c612e9626b70f9ab8528ce42f69388d8120755 | armeb | libudfread-1.1.2 | NOK | http://autobuild.buildroot.net/results/4248560949b2a00d7b99382769178accff561c61 | mips64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/749d83b148acc1639c124fc4fb716ee9a7a8f294 | ORPH arceb | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/daa5b5077abd76e8dde56b11796db6e882d450ce | ORPH sparc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/9551365c36072f9ee4c929c0a50c2c4094ade5f2 | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/12a610a849c49a75cb45df4fd6865875a31d6796 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/af79cc0f5745d2f05c24a474e05b32e79d3f49dd | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/2b5c0d04b1d31e440ba8c37fe6a5bddf39aa3610 | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/ff9669b38ea70114ddf1367823ca9fe9519c066f | ORPH x86_64 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/11a9f2595c2119897d9eb2b0632e3efc5c1c2068 | ORPH riscv32 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/b03b4962007ed93d000babd3d45341e8e7316b1d | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/32e4f3528fa929a4cae79a26563698d87a237120 | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/1cfc8d93d68ca54c3e9728890c7b9e9223613ebe | ORPH powerpc | linux-headers-5.17.15 | NOK | http://autobuild.buildroot.net/results/ab0d8b9d9e6ed68af3265ee300ff96ca22b9a13a | ORPH x86_64 | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/6e344c72a14610fc2a0ec3de072f5a7b61a49af5 | s390x | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4d4ed5ce8f2846209510f512feab9613f4aa4388 | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/032a5fc642e1ae2adf4a9ecdd746d9ef75a33eb1 | aarch64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/6c6e3864b8dc04d42822a6ccaf451b6bb8ae2ca9 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/2a0283cfafde46c6ab4fd4ec967f60c758bdacbd | mipsel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/62755579ccef6c8de235bba27158357c99eafdce | mips | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/f107acac1d74dcd77b52495423251e35e180eeea | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ebbc15108c5c9c794d57bbfde02bcca25e82dd51 | ORPH mipsel | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/e302ff7620ecfc5ca308576cbe0769430be0e3da | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b4d70207c737d69eb3f3f803f5fb49493f4fe057 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/324cc0f2231c65200c166e1f1cf63e438f4cac18 | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/498e9ab4129197e8db06a3f5a4eb0468f01d36ee | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/621f529d5182b194f2b96d6032b01eb7255da4d2 | ORPH i686 | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/8aceb78e9b06185eb56d2f3869df85235c982d2b | ORPH s390x | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/df409fbdd15b828b7f0b474e7ee26a2ac25e7de7 | ORPH arm | opencv4-4.6.0 | NOK | http://autobuild.buildroot.net/results/cbbfc678ed38e3e05e21d71b70e937798e037e6a | x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/799986beb77b7a7d62b00664540a594d75d0619d | xtensa | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9c9434c4ec18e893951e4d22a6e364ff747f4754 | arc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9c64e298c0936fae451ab2ce539598672a178b56 | powerpc64le | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/bae281ba0a4b20bfe2a9963f7cbf8f3ef78a6a52 | or1k | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/4ac9ed28ee92d76326aa5e2287f52e34c4e8ad07 | x86_64 | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/e031b1801ae40c7bf1a9b72106d7576db9bbd322 | mipsel | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/2ef2829d18aacf9b56d6ea268940945a746bebeb | arc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/91b21c339346cedbcf8fa7bd623dcc48098352e8 | mips | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/0e27ac019ad3bcac168b89452251071ecf3eb996 | powerpc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/13cb41484e7d9e24cc0f6b15282c6ce8cc6e0f1b | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7775c8946aabf0bd7b0dc623eb071806ac034a9c | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/dd808f88c22aeea26addb79cbfa52dbc4982cfa5 | powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/09ffc05f0e3202bc068d531b70b1a98a5cf41744 | sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/e32d9cd8fa67cc5012d2c504f14f4fea427b7cd0 | ORPH powerpc | python-numpy-1.21.2 | NOK | http://autobuild.buildroot.net/results/9d484300ea78c627fe4ade50cbc5f20b2732e29c | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/0a8d5cf2346c0e4f37ceb507ed6886b954474768 | i686 | qt-webkit-kiosk-a7720e50f2b... | NOK | http://autobuild.buildroot.net/results/14c4f7f9f674b54c91df87e3ee93bdd554fb31a4 | microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/3e69bab7b618093b3638ed4e4aee7957cc916a53 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/b27007811f1488adffbf0e1d440457dafcb8ebf1 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/493e8696826ccd23b40e1747c5d3451ff163f906 | mips | rtl8189es-39c17661136da48f8... | NOK | http://autobuild.buildroot.net/results/074df1426929c3a24b83e25f74bcf6ce2ccb9b21 | sparc | rtty-7.4.0 | NOK | http://autobuild.buildroot.net/results/16422af9469de114e552124542508c3b18ea8f19 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0bebf7dd427b1e047345d16d1e708c5f6fca3be0 | ORPH aarch64 | stella-6.7 | NOK | http://autobuild.buildroot.net/results/c174353526bc07b752fd5dd77d26832bbd94841a | xtensa | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/07c38e9ba086587e148975ddf65db36f29ee36cf | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cf9d377790b800d8e47cf4368e6fc822d7abbe2f | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2b39a2551d420a83ad8d8612e2ed3515f431eae5 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/fa55906bd6b6605432f14cdc70f9afae02c1bcec | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1dc4083ca5d686feb70a817ed5517aa9bd8e250a | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4f50b91a2c12dc27a0d434cc71d7657824381d7f | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/42ed37b5f3ba6fdc2190482564b7a449db752085 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b6c467298657438efb78b87e84b53a723a601506 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1b939d42f8aa09dd242368c66cf7107ce65b23c5 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6d920fadf2a32a87c7670fedbcdee3a952811b32 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/69f80062352a6a3ce2f638104483c1da60d6bb3b | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1837b1cb4846f5ab7f9bba3be139d8d75b0690da | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/67f7cbdfaa9b3285dd5457e45da4a3ac0821f3ac | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/950c1f87eb9aebcb9bf5c6c8515e94dff6fb453a | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/55235e586fa07dedb8cc3450321dee4b7faaba60 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/de1b87619a8908c20940c16813e42be439a00f03 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/044873f9b56ae3bda9f04f84f4ed5011760fd80f | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/3421959dc622bbeb7e7fcbc41eb44f13b959b2de | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d2008966c46f094a20ec92bac1a0754fffddbe89 | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/7263bc45194454c04d4e547d5c03a96f0d8f04b5 | powerpc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/a7f9aecd656e8725b631a81ee007bfc5a4c42181 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b1b6caaf65ef53567334c3673fbf4f1683a26aa2 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/efe6d14a8b3d5a6cce479af205dd3bd0f04e07bc | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5ea9cb6144ecc0169a2f50957711456b7f0a0c2b | sparc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ae0faf1e78b639b9a9ed7bf8120be162b5ae7886 | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/591ddf7973e3a2c4ebdfe152c7221c37cbffc1bb | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0895a86ca20aa4ae435d2c03d6c14d50ccaafde5 | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/2e8284715825e1fe2ec43662f0f50c20d438a5f4 | mips | unknown | NOK | http://autobuild.buildroot.net/results/44e057f330edf64a38e4293d3c525c2f79b19d87 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/d97c4ac431fe40e5a01eba3c5f59411163ff38da | or1k | unknown | NOK | http://autobuild.buildroot.net/results/6e2e13c4a2752348352be66a2feff353e92ee336 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/14a5cc87c74a98e01efd95ed4a075c001bccdda3 | i686 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/11c3a895e5688913c1bb3470d03a5f33160ece28 | ORPH aarch64_be | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/7ac4e919435fe7f53cedd2fcde354a3f9143c3af | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/ffec4a8fea643acf277b24ebc26be121967fe508 | s390x | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/0738995a4c9368464f99b3f99197a8b0b16e1a3f | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/d854e7a904e95df7c647e9b3981cd59099862652 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/829405e4097fca0c038b421764b84ecd211010b8 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b17e761a29d6a610b63a7647028e9adbd096eb9e | Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 host-rust-1.60.0 | 2 coreutils-9.1 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 valgrind-3.19.0 | 1 wavemon-0.9.4 | 1 xenomai | 1 zfs-2.1.4 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/8d4c6d5eac97a498065dddb52ad7dec2c1fe65e3 | ORPH i686 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/b3f5204b83ce8517f5755a54742f5abc365ae915 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c14c665dc719111f252dba06579c3a73e788a2f | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/99878480489b80d8a22511d9a8890af0707ff574 | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/1f790b4b117dbee9a0560fec899f4088081a20cb | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/88c6ffa6b3a047e0704e34f8b478a48ed9874560 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e6bb244c51af257d6857d7d5a5698ffb48ebe3e5 | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/417e585c25bd0f4c0ffbacd1c7c45832d1c857c0 | ORPH nios2 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/a34e305c76a685e456400865299d666f57d490a4 | ORPH aarch64_be | xenomai | NOK | http://autobuild.buildroot.net/results/d68883629616fec507c783dce9d565f9e7f126f2 | microblaze | zfs-2.1.4 | NOK | http://autobuild.buildroot.net/results/a8fb87336b09fef8787a7889dfcccf14fe1215b9 | Classification of failures by reason for 2022.08.x -------------------------------------------------- unknown | 2 f2fs-tools-1.15.0 | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-pahole-73383b3a39afe86... | 1 libdcadec-0.2.0 | 1 linux-5.17.15 | 1 php-8.1.9 | 1 pixman-0.40.0 | 1 python-orjson-3.7.11 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2a63b2733230ff72877a5a72707ba874785a9256 | sh4a | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/ae7a5906a973194cd9f196aa0d0ca4f371d11558 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/86e15d915a007be31fb06f6a984f692d86175019 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/5bf19329f8f783e9455a1d489a066050d9fa9e09 | powerpc64le | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9dca12cdc0d14889e977f3ad784fdab8d4191fcd | ORPH arm | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/070816354ffdb9e5ca27604a91f9b82e087eb6a1 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/e0bd02e6154597137c471ac69c343e9db57e1c39 | sparc64 | python-orjson-3.7.11 | NOK | http://autobuild.buildroot.net/results/38e5f7d15d7aa35a55cce73eea8383c68b30c22a | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/8ee7eff6d3d362d16165398fd3792162a8266bb0 | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/b60766ac804cfc75cbb1da67b23de94852a474b9 | -- http://autobuild.buildroot.net From gary.bisson at boundarydevices.com Thu Oct 6 07:13:01 2022 From: gary.bisson at boundarydevices.com (Gary Bisson) Date: Thu, 6 Oct 2022 09:13:01 +0200 Subject: [Buildroot] [PATCH 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221004133057.2003750-6-aperez@igalia.com> References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-6-aperez@igalia.com> Message-ID: Hi Adrian, On Tue, Oct 04, 2022 at 04:30:57PM +0300, Adrian Perez de Castro wrote: > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > Signed-off-by: Adrian Perez de Castro > --- > package/cog/cog.hash | 8 ++++---- > package/cog/cog.mk | 37 ++++++++++++++++++++----------------- > 2 files changed, 24 insertions(+), 21 deletions(-) > > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > index aa128d73d8..a2c55c4b94 100644 > --- a/package/cog/cog.hash > +++ b/package/cog/cog.hash > @@ -1,7 +1,7 @@ > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > # Hashes for license files: > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > index 1f24bebee4..ac2ec2a30e 100644 > --- a/package/cog/cog.mk > +++ b/package/cog/cog.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -COG_VERSION = 0.14.1 > +COG_VERSION = 0.16.0 > COG_SITE = https://wpewebkit.org/releases > COG_SOURCE = cog-$(COG_VERSION).tar.xz > COG_INSTALL_STAGING = YES > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > COG_LICENSE = MIT > COG_LICENSE_FILES = COPYING > COG_CONF_OPTS = \ > - -DCOG_BUILD_PROGRAMS=ON \ > - -DCOG_PLATFORM_HEADLESS=ON \ > - -DINSTALL_MAN_PAGES=OFF \ > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > - -DUSE_SOUP2=ON > + -Ddocumentation=false \ > + -Dmanpages=false \ > + -Dprograms=true \ > + -Dsoup2=true \ I'm testing your series and it seems like the above is not correct, it should be '-Dsoup2=enabled' as soup2 isn't a boolean option. Currently it is throwing the following error: ../output/build/cog-0.16.0/meson.build:1:0: ERROR: Value "true" (of type "string") for combo option "Build with libsoup2 instead of libsoup3" is not one of the choices. Possible choices are (as string): "enabled", "disabled", "auto". By using enabled I got another failure due to the wayland platform not finding drm_fourcc.h, I submitted a patch to Cog directly[1]. Regards, Gary [1] https://github.com/Igalia/cog/pull/501 From gwenj at trabucayre.com Thu Oct 6 07:33:51 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 09:33:51 +0200 Subject: [Buildroot] [PATCH] package/python-markdown: bump version to 3.4.1 Message-ID: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou Signed-off-by: Gwenhael Goavec-Merou --- package/python-markdown/python-markdown.hash | 4 ++-- package/python-markdown/python-markdown.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-markdown/python-markdown.hash b/package/python-markdown/python-markdown.hash index b64ac77be0..66208067cc 100644 --- a/package/python-markdown/python-markdown.hash +++ b/package/python-markdown/python-markdown.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/markdown/json -md5 b6833c6326e9164ee0c662218a75e7f0 Markdown-3.3.4.tar.gz -sha256 31b5b491868dcc87d6c24b7e3d19a0d730d59d3e46f4eea6430a321bed387a49 Markdown-3.3.4.tar.gz +md5 597656cf4feadf1998b0511201620202 Markdown-3.4.1.tar.gz +sha256 3b809086bb6efad416156e00a0da66fe47618a5d6918dd688f53f40c8e4cfeff Markdown-3.4.1.tar.gz # Locally computed sha256 sha256 6f1193cb634718e65c3a537d6e25ebd614820ec0ef693cfc12248112638d64da LICENSE.md diff --git a/package/python-markdown/python-markdown.mk b/package/python-markdown/python-markdown.mk index 801360d778..1b9b556201 100644 --- a/package/python-markdown/python-markdown.mk +++ b/package/python-markdown/python-markdown.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MARKDOWN_VERSION = 3.3.4 +PYTHON_MARKDOWN_VERSION = 3.4.1 PYTHON_MARKDOWN_SOURCE = Markdown-$(PYTHON_MARKDOWN_VERSION).tar.gz -PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/49/02/37bd82ae255bb4dfef97a4b32d95906187b7a7a74970761fca1360c4ba22 +PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/85/7e/133e943e97a943d2f1d8bae0c5060f8ac50e6691754eb9dbe036b047a9bb PYTHON_MARKDOWN_LICENSE = BSD-3-Clause PYTHON_MARKDOWN_LICENSE_FILES = LICENSE.md PYTHON_MARKDOWN_SETUP_TYPE = setuptools -- 2.30.2 From aperez at igalia.com Thu Oct 6 08:47:11 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 11:47:11 +0300 Subject: [Buildroot] [PATCH 5/5] package/cog: bump to version 0.16.0 In-Reply-To: References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-6-aperez@igalia.com> Message-ID: <20221006114711.GB961467@igalia.com> Hi Gary, all, On Thu, 06 Oct 2022 09:13:01 +0200 Gary Bisson wrote: > On Tue, Oct 04, 2022 at 04:30:57PM +0300, Adrian Perez de Castro wrote: > > This new version includes support for setting proxy options and gamepad > > support. Release notes: > > > > https://wpewebkit.org/release/cog-0.16.0.html > > > > Signed-off-by: Adrian Perez de Castro > > --- > > package/cog/cog.hash | 8 ++++---- > > package/cog/cog.mk | 37 ++++++++++++++++++++----------------- > > 2 files changed, 24 insertions(+), 21 deletions(-) > > > > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > > index aa128d73d8..a2c55c4b94 100644 > > --- a/package/cog/cog.hash > > +++ b/package/cog/cog.hash > > @@ -1,7 +1,7 @@ > > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > > > # Hashes for license files: > > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > > index 1f24bebee4..ac2ec2a30e 100644 > > --- a/package/cog/cog.mk > > +++ b/package/cog/cog.mk > > @@ -4,7 +4,7 @@ > > # > > ################################################################################ > > > > -COG_VERSION = 0.14.1 > > +COG_VERSION = 0.16.0 > > COG_SITE = https://wpewebkit.org/releases > > COG_SOURCE = cog-$(COG_VERSION).tar.xz > > COG_INSTALL_STAGING = YES > > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > > COG_LICENSE = MIT > > COG_LICENSE_FILES = COPYING > > COG_CONF_OPTS = \ > > - -DCOG_BUILD_PROGRAMS=ON \ > > - -DCOG_PLATFORM_HEADLESS=ON \ > > - -DINSTALL_MAN_PAGES=OFF \ > > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > > - -DUSE_SOUP2=ON > > + -Ddocumentation=false \ > > + -Dmanpages=false \ > > + -Dprograms=true \ > > + -Dsoup2=true \ > > I'm testing your series and it seems like the above is not correct, it > should be '-Dsoup2=enabled' as soup2 isn't a boolean option. Currently > it is throwing the following error: > ../output/build/cog-0.16.0/meson.build:1:0: ERROR: Value "true" (of type "string") for combo option "Build with libsoup2 instead of libsoup3" is not one of the choices. Possible choices are (as string): "enabled", "disabled", "auto". Ouch, good catch. I had the fix for this locally in the Git stash and somehow managed to not include it in the submitted patch set. I will update the series later. > By using enabled I got another failure due to the wayland platform not > finding drm_fourcc.h, I submitted a patch to Cog directly[1]. Thanks for the patch, it's super nice when people take the initiative like this! Let's try and have that landed before I submit the new version of the patch set. > [1] https://github.com/Igalia/cog/pull/501 Cheers, ?Adri?n -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: not available URL: From gwenj at trabucayre.com Thu Oct 6 08:27:57 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 10:27:57 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 Message-ID: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou - remove all no more required patches - backport 2 patches to fix failures induces by missing headers - add dependency to SPDLOG - add pybind dependency where python is set Note: - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, bindings and python wrappers are produces using pybind: this why python-pybind is a buildtime dependency. This one is a stagging only package (nothing installed into target directory -> no select BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES is updated with python-pybind). - host-python-numpy is now required since some cpp bindings uses numpy's functions directly. python-numpy (target package) is left required because python blocks and wrappers needs this library at runtime. Signed-off-by: Gwenhael Goavec-Merou --- Changes v3 -> v4: - re-add runtime comment for numpy - remove python-pybind select - rework commit message Changes v2 -> v3: - update gnuradio version 3.10.3.0 -> 3.10.4.0 - remove patch to fix libfmt9 (now applied) - backport two patch to fix failures due to missing header - explain in commit message why pybind and numpy are now required at buildtime (Thomas) Changes v1 -> v2: - remove #runtime comment for PYTHON_NUMPY and PYTHON_PYBIND (Thomas) - remove host-python-mako to the dependencies list (now useless) (Thomas) - backport patch to fix build failure with libfmt > 9 --- ...g-missing-vector-in-blockinterleaver.patch | 42 + ....h-drop-boost-cstdint.hpp-and-use-cs.patch | 39 - ...rleaving.h-add-missing-cstddef-heade.patch | 33 + ...aceholders_with_their_full_namespace.patch | 1012 ----------------- ...rdcode-INTERFACE_INCLUDE_DIRECTORIES.patch | 57 - ...add-examples-c-subdirectory-when-gr-.patch | 55 - ...ve-deprecated-math-common_factor.hpp.patch | 165 --- package/gnuradio/Config.in | 4 +- package/gnuradio/gnuradio.hash | 2 +- package/gnuradio/gnuradio.mk | 12 +- 10 files changed, 83 insertions(+), 1338 deletions(-) create mode 100644 package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch delete mode 100644 package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch create mode 100644 package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch delete mode 100644 package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch delete mode 100644 package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch delete mode 100644 package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch delete mode 100644 package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch diff --git a/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch new file mode 100644 index 0000000000..f805e300af --- /dev/null +++ b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch @@ -0,0 +1,42 @@ +From 45fe4ac55ad88b6793d225e676205c30388ec138 Mon Sep 17 00:00:00 2001 +From: Ryan Volz +Date: Fri, 16 Sep 2022 21:05:51 -0400 +Subject: [PATCH 1/2] blocks: Including missing in blockinterleaver. + +Signed-off-by: Ryan Volz +[Retrieved (and backported) from: +https://github.com/gnuradio/gnuradio/commit/463c3477549b26b32d9b73eef30044e97c4eee64] +Signed-off-by: Gwenhael Goavec-Merou +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 2 +- + gr-blocks/lib/blockinterleaving.cc | 1 + + 2 files changed, 2 insertions(+), 1 deletion(-) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index 9d4e0f249..df831fe5a 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -12,7 +12,7 @@ + #define INCLUDED_GR_BLOCKS_BLOCKINTERLEAVING_H + + #include +- ++#include + + namespace gr { + namespace blocks { +diff --git a/gr-blocks/lib/blockinterleaving.cc b/gr-blocks/lib/blockinterleaving.cc +index fc5873e11..768ad9ea7 100644 +--- a/gr-blocks/lib/blockinterleaving.cc ++++ b/gr-blocks/lib/blockinterleaving.cc +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch b/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch deleted file mode 100644 index 532bebcf2e..0000000000 --- a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f643bc12100c67288adda3699a9e61d6a66fb529 Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Fri, 7 Feb 2020 16:49:30 +0100 -Subject: [PATCH] gr-digital:glfsr.h: drop boost/cstdint.hpp and use cstdint - -gr-digital/glfsr.h include boost/cstdint.hpp to have uintxx_t. -These types are in boost namespace but nor using namespace xxx, nor boost:: are used. -The result is : -In file included from /home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/glfsr.cc:23: -/home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/../include/gnuradio/digital/glfsr.h:42:5: error: 'uint32_t' does not name a type; did you mean 'u_int32_t'? -uint32_t d_shift_register; -^~~~~~~~ -u_int32_t - -Since Gnuradio policy is Less boost == better and C++11 is used, use cstdint -instead of boost/cstdint.hpp. - -[backported from 475e4a156b516c089175afb998acdc80b740b437] -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-digital/include/gnuradio/digital/glfsr.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gr-digital/include/gnuradio/digital/glfsr.h b/gr-digital/include/gnuradio/digital/glfsr.h -index 0b5141f1f..1003bcd01 100644 ---- a/gr-digital/include/gnuradio/digital/glfsr.h -+++ b/gr-digital/include/gnuradio/digital/glfsr.h -@@ -24,7 +24,7 @@ - #define INCLUDED_DIGITAL_GLFSR_H - - #include --#include -+#include - - namespace gr { - namespace digital { --- -2.24.1 - diff --git a/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch new file mode 100644 index 0000000000..d551793be5 --- /dev/null +++ b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch @@ -0,0 +1,33 @@ +From 901c2ad1ac88908a2e6db5615d5af39a218d826d Mon Sep 17 00:00:00 2001 +From: Gwenhael Goavec-Merou +Date: Fri, 23 Sep 2022 08:41:26 +0200 +Subject: [PATCH 2/2] blocks/blockinterleaving.h: add missing cstddef header + (required for size_t) + +Fix build failure like: + +gnuradio/gr-blocks/lib/../include/gnuradio/blocks/blockinterleaving.h:25:36: error: ???size_t??? was not declared in this scope + +This failure is due to the miss of cstddef include + +Signed-off-by: Gwenhael Goavec-Merou +[Upstream status: https://github.com/gnuradio/gnuradio/pull/6188] +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index df831fe5a..33c59e35b 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -13,6 +13,7 @@ + + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch b/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch deleted file mode 100644 index 431cc12522..0000000000 --- a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch +++ /dev/null @@ -1,1012 +0,0 @@ -From 5d4c317a372c77aa70df6ab3403d161cd41a7d17 Mon Sep 17 00:00:00 2001 -From: ponce -Date: Sun, 17 May 2020 14:02:57 +0200 -Subject: [PATCH] boost: qualify placeholders with their full namespace. - -This is needed with boost >= 1.73.0. - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3566] - -Signed-off-by: ponce -Signed-off-by: Gwenhael Goavec-Merou ---- - .../(exported from wiki) Message Passing.txt | 8 +++--- - gnuradio-runtime/lib/block.cc | 3 ++- - gr-blocks/lib/copy_impl.cc | 4 ++- - gr-blocks/lib/message_debug_impl.cc | 13 +++++++--- - gr-blocks/lib/message_strobe_impl.cc | 5 ++-- - gr-blocks/lib/message_strobe_random_impl.cc | 5 ++-- - gr-blocks/lib/multiply_matrix_impl.cc | 11 +++++--- - gr-blocks/lib/mute_impl.cc | 5 ++-- - gr-blocks/lib/nop_impl.cc | 5 ++-- - gr-blocks/lib/pdu_filter_impl.cc | 5 ++-- - gr-blocks/lib/pdu_remove_impl.cc | 5 ++-- - gr-blocks/lib/pdu_set_impl.cc | 4 ++- - gr-blocks/lib/random_pdu_impl.cc | 5 ++-- - gr-blocks/lib/repeat_impl.cc | 5 ++-- - gr-blocks/lib/socket_pdu_impl.cc | 18 ++++++++----- - .../lib/tagged_stream_multiply_length_impl.cc | 7 +++--- - gr-blocks/lib/tuntap_pdu_impl.cc | 3 ++- - gr-digital/lib/chunks_to_symbols_impl.cc | 5 ++-- - .../lib/constellation_receiver_cb_impl.cc | 14 ++++++----- - gr-digital/lib/costas_loop_cc_impl.cc | 4 ++- - gr-digital/lib/crc32_async_bb_impl.cc | 8 ++++-- - gr-digital/lib/header_payload_demux_impl.cc | 7 +++--- - .../lib/protocol_formatter_async_impl.cc | 4 ++- - gr-fec/lib/async_decoder_impl.cc | 8 ++++-- - gr-fec/lib/async_encoder_impl.cc | 8 ++++-- - gr-fec/lib/depuncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_ff_impl.cc | 4 ++- - gr-filter/lib/freq_xlating_fir_filter_impl.cc | 2 +- - gr-filter/lib/mmse_resampler_cc_impl.cc | 5 ++-- - gr-filter/lib/mmse_resampler_ff_impl.cc | 5 ++-- - gr-qtgui/lib/const_sink_c_impl.cc | 5 ++-- - gr-qtgui/lib/edit_box_msg_impl.cc | 4 ++- - gr-qtgui/lib/freq_sink_c_impl.cc | 12 ++++++--- - gr-qtgui/lib/freq_sink_f_impl.cc | 12 ++++++--- - gr-qtgui/lib/histogram_sink_f_impl.cc | 5 ++-- - gr-qtgui/lib/sink_c_impl.cc | 4 ++- - gr-qtgui/lib/sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_b_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_c_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/waterfall_sink_c_impl.cc | 13 +++++++--- - gr-qtgui/lib/waterfall_sink_f_impl.cc | 13 +++++++--- - gr-uhd/lib/usrp_block_impl.cc | 25 ++++++++++++------- - gr-uhd/lib/usrp_source_impl.cc | 5 ++-- - gr-zeromq/lib/pub_msg_sink_impl.cc | 4 ++- - gr-zeromq/lib/push_msg_sink_impl.cc | 4 ++- - 48 files changed, 213 insertions(+), 106 deletions(-) - -diff --git a/docs/usage-manual/(exported from wiki) Message Passing.txt b/docs/usage-manual/(exported from wiki) Message Passing.txt -index 4654bd5da..551e71022 100644 ---- a/docs/usage-manual/(exported from wiki) Message Passing.txt -+++ b/docs/usage-manual/(exported from wiki) Message Passing.txt -@@ -94,7 +94,7 @@ must then bind this port to the message handler. For this, we use - Boost's 'bind' function: - - set_msg_handler(pmt::pmt_t port_id, -- boost::bind(&block_class::message_handler_function, this, _1)); -+ boost::bind(&block_class::message_handler_function, this, boost::placeholders::_1)); - - In Python: - -@@ -241,15 +241,15 @@ The constructor of this block looks like this: - { - message_port_register_in(pmt::mp("print")); - set_msg_handler(pmt::mp("print"), -- boost::bind(&message_debug_impl::print, this, _1)); -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); - set_msg_handler(pmt::mp("store"), -- boost::bind(&message_debug_impl::store, this, _1)); -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); - set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - -diff --git a/gnuradio-runtime/lib/block.cc b/gnuradio-runtime/lib/block.cc -index 591428390..fca4cab97 100644 ---- a/gnuradio-runtime/lib/block.cc -+++ b/gnuradio-runtime/lib/block.cc -@@ -61,7 +61,8 @@ block::block(const std::string& name, - { - global_block_registry.register_primitive(alias(), this); - message_port_register_in(d_system_port); -- set_msg_handler(d_system_port, boost::bind(&block::system_handler, this, _1)); -+ set_msg_handler(d_system_port, -+ boost::bind(&block::system_handler, this, boost::placeholders::_1)); - - configure_default_loggers(d_logger, d_debug_logger, symbol_name()); - } -diff --git a/gr-blocks/lib/copy_impl.cc b/gr-blocks/lib/copy_impl.cc -index c377e57b1..b55196c24 100644 ---- a/gr-blocks/lib/copy_impl.cc -+++ b/gr-blocks/lib/copy_impl.cc -@@ -44,7 +44,9 @@ copy_impl::copy_impl(size_t itemsize) - d_enabled(true) - { - message_port_register_in(pmt::mp("en")); -- set_msg_handler(pmt::mp("en"), boost::bind(©_impl::handle_enable, this, _1)); -+ set_msg_handler( -+ pmt::mp("en"), -+ boost::bind(©_impl::handle_enable, this, boost::placeholders::_1)); - } - - copy_impl::~copy_impl() {} -diff --git a/gr-blocks/lib/message_debug_impl.cc b/gr-blocks/lib/message_debug_impl.cc -index a8c84aa50..916f97ca3 100644 ---- a/gr-blocks/lib/message_debug_impl.cc -+++ b/gr-blocks/lib/message_debug_impl.cc -@@ -90,14 +90,19 @@ message_debug_impl::message_debug_impl() - : block("message_debug", io_signature::make(0, 0, 0), io_signature::make(0, 0, 0)) - { - message_port_register_in(pmt::mp("print")); -- set_msg_handler(pmt::mp("print"), boost::bind(&message_debug_impl::print, this, _1)); -+ set_msg_handler( -+ pmt::mp("print"), -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); -- set_msg_handler(pmt::mp("store"), boost::bind(&message_debug_impl::store, this, _1)); -+ set_msg_handler( -+ pmt::mp("store"), -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); -- set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("print_pdu"), -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - message_debug_impl::~message_debug_impl() {} -diff --git a/gr-blocks/lib/message_strobe_impl.cc b/gr-blocks/lib/message_strobe_impl.cc -index 038eeae5a..d131b8166 100644 ---- a/gr-blocks/lib/message_strobe_impl.cc -+++ b/gr-blocks/lib/message_strobe_impl.cc -@@ -53,8 +53,9 @@ message_strobe_impl::message_strobe_impl(pmt::pmt_t msg, long period_ms) - message_port_register_out(d_port); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_impl::set_msg, this, boost::placeholders::_1)); - } - - message_strobe_impl::~message_strobe_impl() {} -diff --git a/gr-blocks/lib/message_strobe_random_impl.cc b/gr-blocks/lib/message_strobe_random_impl.cc -index 0ab5d6adc..53e641fba 100644 ---- a/gr-blocks/lib/message_strobe_random_impl.cc -+++ b/gr-blocks/lib/message_strobe_random_impl.cc -@@ -74,8 +74,9 @@ message_strobe_random_impl::message_strobe_random_impl( - new gr::thread::thread(boost::bind(&message_strobe_random_impl::run, this))); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_random_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_random_impl::set_msg, this, boost::placeholders::_1)); - } - - long message_strobe_random_impl::next_delay() -diff --git a/gr-blocks/lib/multiply_matrix_impl.cc b/gr-blocks/lib/multiply_matrix_impl.cc -index e1b9c746c..e38953bab 100644 ---- a/gr-blocks/lib/multiply_matrix_impl.cc -+++ b/gr-blocks/lib/multiply_matrix_impl.cc -@@ -235,9 +235,10 @@ multiply_matrix_impl::multiply_matrix_impl( - - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); -- set_msg_handler( -- port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ set_msg_handler(port_name, -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - template <> -@@ -257,7 +258,9 @@ multiply_matrix_impl::multiply_matrix_impl( - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); - set_msg_handler(port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - -diff --git a/gr-blocks/lib/mute_impl.cc b/gr-blocks/lib/mute_impl.cc -index bd65ce207..5c732f8f4 100644 ---- a/gr-blocks/lib/mute_impl.cc -+++ b/gr-blocks/lib/mute_impl.cc -@@ -47,8 +47,9 @@ mute_impl::mute_impl(bool mute) - d_mute(mute) - { - this->message_port_register_in(pmt::intern("set_mute")); -- this->set_msg_handler(pmt::intern("set_mute"), -- boost::bind(&mute_impl::set_mute_pmt, this, _1)); -+ this->set_msg_handler( -+ pmt::intern("set_mute"), -+ boost::bind(&mute_impl::set_mute_pmt, this, boost::placeholders::_1)); - } - - template -diff --git a/gr-blocks/lib/nop_impl.cc b/gr-blocks/lib/nop_impl.cc -index db216d97a..e9baee587 100644 ---- a/gr-blocks/lib/nop_impl.cc -+++ b/gr-blocks/lib/nop_impl.cc -@@ -44,8 +44,9 @@ nop_impl::nop_impl(size_t sizeof_stream_item) - { - // Arrange to have count_received_msgs called when messages are received. - message_port_register_in(pmt::mp("port")); -- set_msg_handler(pmt::mp("port"), -- boost::bind(&nop_impl::count_received_msgs, this, _1)); -+ set_msg_handler( -+ pmt::mp("port"), -+ boost::bind(&nop_impl::count_received_msgs, this, boost::placeholders::_1)); - } - - nop_impl::~nop_impl() {} -diff --git a/gr-blocks/lib/pdu_filter_impl.cc b/gr-blocks/lib/pdu_filter_impl.cc -index b0748eec0..63cfe47e4 100644 ---- a/gr-blocks/lib/pdu_filter_impl.cc -+++ b/gr-blocks/lib/pdu_filter_impl.cc -@@ -44,8 +44,9 @@ pdu_filter_impl::pdu_filter_impl(pmt::pmt_t k, pmt::pmt_t v, bool invert) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_filter_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_filter_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_filter_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_remove_impl.cc b/gr-blocks/lib/pdu_remove_impl.cc -index 19cc4dc76..2b97f827b 100644 ---- a/gr-blocks/lib/pdu_remove_impl.cc -+++ b/gr-blocks/lib/pdu_remove_impl.cc -@@ -42,8 +42,9 @@ pdu_remove_impl::pdu_remove_impl(pmt::pmt_t k) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_remove_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_remove_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_remove_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_set_impl.cc b/gr-blocks/lib/pdu_set_impl.cc -index 40fbc3cd8..af59ef70f 100644 ---- a/gr-blocks/lib/pdu_set_impl.cc -+++ b/gr-blocks/lib/pdu_set_impl.cc -@@ -43,7 +43,9 @@ pdu_set_impl::pdu_set_impl(pmt::pmt_t k, pmt::pmt_t v) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&pdu_set_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_set_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_set_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/random_pdu_impl.cc b/gr-blocks/lib/random_pdu_impl.cc -index 75d825aef..6c142c353 100644 ---- a/gr-blocks/lib/random_pdu_impl.cc -+++ b/gr-blocks/lib/random_pdu_impl.cc -@@ -52,8 +52,9 @@ random_pdu_impl::random_pdu_impl(int min_items, - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pmt::mp("generate")); -- set_msg_handler(pmt::mp("generate"), -- boost::bind(&random_pdu_impl::generate_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("generate"), -+ boost::bind(&random_pdu_impl::generate_pdu, this, boost::placeholders::_1)); - if (length_modulo < 1) - throw std::runtime_error("length_module must be >= 1"); - if (max_items < length_modulo) -diff --git a/gr-blocks/lib/repeat_impl.cc b/gr-blocks/lib/repeat_impl.cc -index 189fbc894..d6569625d 100644 ---- a/gr-blocks/lib/repeat_impl.cc -+++ b/gr-blocks/lib/repeat_impl.cc -@@ -44,8 +44,9 @@ repeat_impl::repeat_impl(size_t itemsize, int interp) - d_interp(interp) - { - message_port_register_in(pmt::mp("interpolation")); -- set_msg_handler(pmt::mp("interpolation"), -- boost::bind(&repeat_impl::msg_set_interpolation, this, _1)); -+ set_msg_handler( -+ pmt::mp("interpolation"), -+ boost::bind(&repeat_impl::msg_set_interpolation, this, boost::placeholders::_1)); - } - - void repeat_impl::msg_set_interpolation(pmt::pmt_t msg) -diff --git a/gr-blocks/lib/socket_pdu_impl.cc b/gr-blocks/lib/socket_pdu_impl.cc -index df69f07ad..163eec3a6 100644 ---- a/gr-blocks/lib/socket_pdu_impl.cc -+++ b/gr-blocks/lib/socket_pdu_impl.cc -@@ -101,7 +101,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - start_tcp_accept(); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_server_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_server_send, -+ this, -+ boost::placeholders::_1)); - } else if (type == "TCP_CLIENT") { - boost::system::error_code error = boost::asio::error::host_not_found; - d_tcp_socket.reset(new boost::asio::ip::tcp::socket(d_io_service)); -@@ -111,7 +113,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - d_tcp_socket->set_option(boost::asio::ip::tcp::no_delay(d_tcp_no_delay)); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_client_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_client_send, -+ this, -+ boost::placeholders::_1)); - - d_tcp_socket->async_read_some( - boost::asio::buffer(d_rxbuf), -@@ -130,8 +134,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else if (type == "UDP_CLIENT") { - d_udp_socket.reset( - new boost::asio::ip::udp::socket(d_io_service, d_udp_endpoint)); -@@ -143,8 +148,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else - throw std::runtime_error("gr::blocks:socket_pdu: unknown socket type"); - -diff --git a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -index 30f4c46dc..34b95d647 100644 ---- a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -+++ b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -@@ -49,9 +49,10 @@ tagged_stream_multiply_length_impl::tagged_stream_multiply_length_impl( - set_tag_propagation_policy(TPP_DONT); - set_relative_rate(1, 1); - message_port_register_in(pmt::intern("set_scalar")); -- set_msg_handler( -- pmt::intern("set_scalar"), -- boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, this, _1)); -+ set_msg_handler(pmt::intern("set_scalar"), -+ boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, -+ this, -+ boost::placeholders::_1)); - } - - tagged_stream_multiply_length_impl::~tagged_stream_multiply_length_impl() {} -diff --git a/gr-blocks/lib/tuntap_pdu_impl.cc b/gr-blocks/lib/tuntap_pdu_impl.cc -index 4343ae1dc..0d9d7e28c 100644 ---- a/gr-blocks/lib/tuntap_pdu_impl.cc -+++ b/gr-blocks/lib/tuntap_pdu_impl.cc -@@ -96,7 +96,8 @@ tuntap_pdu_impl::tuntap_pdu_impl(std::string dev, int MTU, bool istunflag) - - // set up input message port - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&tuntap_pdu_impl::send, this, _1)); -+ set_msg_handler(pdu::pdu_port_id(), -+ boost::bind(&tuntap_pdu_impl::send, this, boost::placeholders::_1)); - } - - int tuntap_pdu_impl::tun_alloc(char* dev, int flags) -diff --git a/gr-digital/lib/chunks_to_symbols_impl.cc b/gr-digital/lib/chunks_to_symbols_impl.cc -index 26d590a66..a6810a69e 100644 ---- a/gr-digital/lib/chunks_to_symbols_impl.cc -+++ b/gr-digital/lib/chunks_to_symbols_impl.cc -@@ -53,8 +53,9 @@ chunks_to_symbols_impl::chunks_to_symbols_impl( - this->message_port_register_in(pmt::mp("set_symbol_table")); - this->set_msg_handler( - pmt::mp("set_symbol_table"), -- boost::bind( -- &chunks_to_symbols_impl::handle_set_symbol_table, this, _1)); -+ boost::bind(&chunks_to_symbols_impl::handle_set_symbol_table, -+ this, -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-digital/lib/constellation_receiver_cb_impl.cc b/gr-digital/lib/constellation_receiver_cb_impl.cc -index 7fb7559d5..7e216ece5 100644 ---- a/gr-digital/lib/constellation_receiver_cb_impl.cc -+++ b/gr-digital/lib/constellation_receiver_cb_impl.cc -@@ -61,14 +61,16 @@ constellation_receiver_cb_impl::constellation_receiver_cb_impl( - "This receiver only works with constellations of dimension 1."); - - message_port_register_in(pmt::mp("set_constellation")); -- set_msg_handler( -- pmt::mp("set_constellation"), -- boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, this, _1)); -+ set_msg_handler(pmt::mp("set_constellation"), -+ boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, -+ this, -+ boost::placeholders::_1)); - - message_port_register_in(pmt::mp("rotate_phase")); -- set_msg_handler( -- pmt::mp("rotate_phase"), -- boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, this, _1)); -+ set_msg_handler(pmt::mp("rotate_phase"), -+ boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, -+ this, -+ boost::placeholders::_1)); - } - - constellation_receiver_cb_impl::~constellation_receiver_cb_impl() {} -diff --git a/gr-digital/lib/costas_loop_cc_impl.cc b/gr-digital/lib/costas_loop_cc_impl.cc -index c3b30834e..e1229e6f4 100644 ---- a/gr-digital/lib/costas_loop_cc_impl.cc -+++ b/gr-digital/lib/costas_loop_cc_impl.cc -@@ -82,7 +82,9 @@ costas_loop_cc_impl::costas_loop_cc_impl(float loop_bw, int order, bool use_snr) - - message_port_register_in(pmt::mp("noise")); - set_msg_handler(pmt::mp("noise"), -- boost::bind(&costas_loop_cc_impl::handle_set_noise, this, _1)); -+ boost::bind(&costas_loop_cc_impl::handle_set_noise, -+ this, -+ boost::placeholders::_1)); - } - - costas_loop_cc_impl::~costas_loop_cc_impl() {} -diff --git a/gr-digital/lib/crc32_async_bb_impl.cc b/gr-digital/lib/crc32_async_bb_impl.cc -index bffbb2a73..66143866c 100644 ---- a/gr-digital/lib/crc32_async_bb_impl.cc -+++ b/gr-digital/lib/crc32_async_bb_impl.cc -@@ -48,9 +48,13 @@ crc32_async_bb_impl::crc32_async_bb_impl(bool check) - message_port_register_out(d_out_port); - - if (check) -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::check, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::check, this, boost::placeholders::_1)); - else -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::calc, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::calc, this, boost::placeholders::_1)); - } - - crc32_async_bb_impl::~crc32_async_bb_impl() {} -diff --git a/gr-digital/lib/header_payload_demux_impl.cc b/gr-digital/lib/header_payload_demux_impl.cc -index 98c805fb2..7cc1e0a4e 100644 ---- a/gr-digital/lib/header_payload_demux_impl.cc -+++ b/gr-digital/lib/header_payload_demux_impl.cc -@@ -150,9 +150,10 @@ header_payload_demux_impl::header_payload_demux_impl( - } - set_tag_propagation_policy(TPP_DONT); - message_port_register_in(msg_port_id()); -- set_msg_handler( -- msg_port_id(), -- boost::bind(&header_payload_demux_impl::parse_header_data_msg, this, _1)); -+ set_msg_handler(msg_port_id(), -+ boost::bind(&header_payload_demux_impl::parse_header_data_msg, -+ this, -+ boost::placeholders::_1)); - for (size_t i = 0; i < special_tags.size(); i++) { - d_special_tags.push_back(pmt::string_to_symbol(special_tags[i])); - d_special_tags_last_value.push_back(pmt::PMT_NIL); -diff --git a/gr-digital/lib/protocol_formatter_async_impl.cc b/gr-digital/lib/protocol_formatter_async_impl.cc -index 84b693745..c08bbb9ae 100644 ---- a/gr-digital/lib/protocol_formatter_async_impl.cc -+++ b/gr-digital/lib/protocol_formatter_async_impl.cc -@@ -55,7 +55,9 @@ protocol_formatter_async_impl::protocol_formatter_async_impl( - message_port_register_out(d_pld_port); - - set_msg_handler(d_in_port, -- boost::bind(&protocol_formatter_async_impl::append, this, _1)); -+ boost::bind(&protocol_formatter_async_impl::append, -+ this, -+ boost::placeholders::_1)); - } - - protocol_formatter_async_impl::~protocol_formatter_async_impl() {} -diff --git a/gr-fec/lib/async_decoder_impl.cc b/gr-fec/lib/async_decoder_impl.cc -index e7a668c83..5d68d13ae 100644 ---- a/gr-fec/lib/async_decoder_impl.cc -+++ b/gr-fec/lib/async_decoder_impl.cc -@@ -65,10 +65,14 @@ async_decoder_impl::async_decoder_impl(generic_decoder::sptr my_decoder, - if (d_packed) { - d_pack = new blocks::kernel::pack_k_bits(8); - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_packed, this, _1)); -+ boost::bind(&async_decoder_impl::decode_packed, -+ this, -+ boost::placeholders::_1)); - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_unpacked, this, _1)); -+ boost::bind(&async_decoder_impl::decode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - // The maximum frame size is set by the initial frame size of the decoder. -diff --git a/gr-fec/lib/async_encoder_impl.cc b/gr-fec/lib/async_encoder_impl.cc -index 811d55601..506ae5c7e 100644 ---- a/gr-fec/lib/async_encoder_impl.cc -+++ b/gr-fec/lib/async_encoder_impl.cc -@@ -64,7 +64,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - if (d_packed) { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_packed, this, _1)); -+ boost::bind(&async_encoder_impl::encode_packed, -+ this, -+ boost::placeholders::_1)); - - d_unpack = new blocks::kernel::unpack_k_bits(8); - -@@ -74,7 +76,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_unpacked, this, _1)); -+ boost::bind(&async_encoder_impl::encode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - if (d_packed || (strncmp(d_encoder->get_input_conversion(), "pack", 4) == 0)) { -diff --git a/gr-fec/lib/depuncture_bb_impl.cc b/gr-fec/lib/depuncture_bb_impl.cc -index 27d00bb5b..f64dad45f 100644 ---- a/gr-fec/lib/depuncture_bb_impl.cc -+++ b/gr-fec/lib/depuncture_bb_impl.cc -@@ -74,7 +74,9 @@ depuncture_bb_impl::depuncture_bb_impl(int puncsize, int puncpat, int delay, cha - set_fixed_rate(true); - set_relative_rate((uint64_t)d_puncsize, (uint64_t)(d_puncsize - d_puncholes)); - set_output_multiple(d_puncsize); -- // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - depuncture_bb_impl::~depuncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_bb_impl.cc b/gr-fec/lib/puncture_bb_impl.cc -index a365d6a69..f2078d8c5 100644 ---- a/gr-fec/lib/puncture_bb_impl.cc -+++ b/gr-fec/lib/puncture_bb_impl.cc -@@ -72,7 +72,9 @@ puncture_bb_impl::puncture_bb_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_bb_impl::~puncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_ff_impl.cc b/gr-fec/lib/puncture_ff_impl.cc -index c95288d69..95fb649a8 100644 ---- a/gr-fec/lib/puncture_ff_impl.cc -+++ b/gr-fec/lib/puncture_ff_impl.cc -@@ -72,7 +72,9 @@ puncture_ff_impl::puncture_ff_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_ff_impl::~puncture_ff_impl() {} -diff --git a/gr-filter/lib/freq_xlating_fir_filter_impl.cc b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -index 8ddc967ba..50ec58947 100644 ---- a/gr-filter/lib/freq_xlating_fir_filter_impl.cc -+++ b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -@@ -72,7 +72,7 @@ freq_xlating_fir_filter_impl::freq_xlating_fir_filter_impl( - boost::bind( - &freq_xlating_fir_filter_impl::handle_set_center_freq, - this, -- _1)); -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-filter/lib/mmse_resampler_cc_impl.cc b/gr-filter/lib/mmse_resampler_cc_impl.cc -index 59f9eacfa..bdce51716 100644 ---- a/gr-filter/lib/mmse_resampler_cc_impl.cc -+++ b/gr-filter/lib/mmse_resampler_cc_impl.cc -@@ -52,8 +52,9 @@ mmse_resampler_cc_impl::mmse_resampler_cc_impl(float phase_shift, float resamp_r - - set_inverse_relative_rate(d_mu_inc); - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_cc_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_cc_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_cc_impl::~mmse_resampler_cc_impl() { delete d_resamp; } -diff --git a/gr-filter/lib/mmse_resampler_ff_impl.cc b/gr-filter/lib/mmse_resampler_ff_impl.cc -index 342d9f767..3d7272711 100644 ---- a/gr-filter/lib/mmse_resampler_ff_impl.cc -+++ b/gr-filter/lib/mmse_resampler_ff_impl.cc -@@ -53,8 +53,9 @@ mmse_resampler_ff_impl::mmse_resampler_ff_impl(float phase_shift, float resamp_r - set_inverse_relative_rate(d_mu_inc); - - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_ff_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_ff_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_ff_impl::~mmse_resampler_ff_impl() { delete d_resamp; } -diff --git a/gr-qtgui/lib/const_sink_c_impl.cc b/gr-qtgui/lib/const_sink_c_impl.cc -index 852f6ee10..04d421d03 100644 ---- a/gr-qtgui/lib/const_sink_c_impl.cc -+++ b/gr-qtgui/lib/const_sink_c_impl.cc -@@ -69,8 +69,9 @@ const_sink_c_impl::const_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&const_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&const_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - for (int i = 0; i < d_nconnections; i++) { - d_residbufs_real.push_back( -diff --git a/gr-qtgui/lib/edit_box_msg_impl.cc b/gr-qtgui/lib/edit_box_msg_impl.cc -index 8713aa820..39546cbf3 100644 ---- a/gr-qtgui/lib/edit_box_msg_impl.cc -+++ b/gr-qtgui/lib/edit_box_msg_impl.cc -@@ -158,7 +158,9 @@ edit_box_msg_impl::edit_box_msg_impl(data_type_t type, - message_port_register_out(d_port); - message_port_register_in(pmt::mp("val")); - -- set_msg_handler(pmt::mp("val"), boost::bind(&edit_box_msg_impl::set_value, this, _1)); -+ set_msg_handler( -+ pmt::mp("val"), -+ boost::bind(&edit_box_msg_impl::set_value, this, boost::placeholders::_1)); - } - - edit_box_msg_impl::~edit_box_msg_impl() -diff --git a/gr-qtgui/lib/freq_sink_c_impl.cc b/gr-qtgui/lib/freq_sink_c_impl.cc -index 3a34df6ec..fe231699f 100644 ---- a/gr-qtgui/lib/freq_sink_c_impl.cc -+++ b/gr-qtgui/lib/freq_sink_c_impl.cc -@@ -82,17 +82,23 @@ freq_sink_c_impl::freq_sink_c_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_c_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_c_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/freq_sink_f_impl.cc b/gr-qtgui/lib/freq_sink_f_impl.cc -index c14bfc31f..7090d8699 100644 ---- a/gr-qtgui/lib/freq_sink_f_impl.cc -+++ b/gr-qtgui/lib/freq_sink_f_impl.cc -@@ -82,17 +82,23 @@ freq_sink_f_impl::freq_sink_f_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_f_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_f_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/histogram_sink_f_impl.cc b/gr-qtgui/lib/histogram_sink_f_impl.cc -index d16de932c..1602d1896 100644 ---- a/gr-qtgui/lib/histogram_sink_f_impl.cc -+++ b/gr-qtgui/lib/histogram_sink_f_impl.cc -@@ -81,8 +81,9 @@ histogram_sink_f_impl::histogram_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&histogram_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&histogram_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (int i = 0; i < d_nconnections + 1; i++) { -diff --git a/gr-qtgui/lib/sink_c_impl.cc b/gr-qtgui/lib/sink_c_impl.cc -index d3feb9d16..73136e789 100644 ---- a/gr-qtgui/lib/sink_c_impl.cc -+++ b/gr-qtgui/lib/sink_c_impl.cc -@@ -96,7 +96,9 @@ sink_c_impl::sink_c_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/sink_f_impl.cc b/gr-qtgui/lib/sink_f_impl.cc -index 418b630b7..d31023a51 100644 ---- a/gr-qtgui/lib/sink_f_impl.cc -+++ b/gr-qtgui/lib/sink_f_impl.cc -@@ -95,7 +95,9 @@ sink_f_impl::sink_f_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/time_raster_sink_b_impl.cc b/gr-qtgui/lib/time_raster_sink_b_impl.cc -index 045c216b0..3aa503ccf 100644 ---- a/gr-qtgui/lib/time_raster_sink_b_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_b_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_b_impl::time_raster_sink_b_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_b_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_b_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_scale = 1.0f; - -diff --git a/gr-qtgui/lib/time_raster_sink_f_impl.cc b/gr-qtgui/lib/time_raster_sink_f_impl.cc -index d186f319d..b3516e5be 100644 ---- a/gr-qtgui/lib/time_raster_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_f_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_f_impl::time_raster_sink_f_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_f_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_f_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_icols = static_cast(ceil(d_cols)); - d_tmpflt = (float*)volk_malloc(d_icols * sizeof(float), volk_get_alignment()); -diff --git a/gr-qtgui/lib/time_sink_c_impl.cc b/gr-qtgui/lib/time_sink_c_impl.cc -index b73a1c1ad..83fbda298 100644 ---- a/gr-qtgui/lib/time_sink_c_impl.cc -+++ b/gr-qtgui/lib/time_sink_c_impl.cc -@@ -80,7 +80,9 @@ time_sink_c_impl::time_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - // +2 for the PDU message buffers - for (unsigned int n = 0; n < d_nconnections + 2; n++) { -diff --git a/gr-qtgui/lib/time_sink_f_impl.cc b/gr-qtgui/lib/time_sink_f_impl.cc -index df13998d7..dd5ed12c8 100644 ---- a/gr-qtgui/lib/time_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_sink_f_impl.cc -@@ -80,7 +80,9 @@ time_sink_f_impl::time_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (unsigned int n = 0; n < d_nconnections + 1; n++) { -diff --git a/gr-qtgui/lib/waterfall_sink_c_impl.cc b/gr-qtgui/lib/waterfall_sink_c_impl.cc -index fcf2ed98b..da38d32ba 100644 ---- a/gr-qtgui/lib/waterfall_sink_c_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_c_impl.cc -@@ -118,19 +118,24 @@ waterfall_sink_c_impl::waterfall_sink_c_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_c_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_c_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_c_impl::~waterfall_sink_c_impl() -diff --git a/gr-qtgui/lib/waterfall_sink_f_impl.cc b/gr-qtgui/lib/waterfall_sink_f_impl.cc -index aa1037a47..d4231a564 100644 ---- a/gr-qtgui/lib/waterfall_sink_f_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_f_impl.cc -@@ -116,19 +116,24 @@ waterfall_sink_f_impl::waterfall_sink_f_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_f_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_f_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_f_impl::~waterfall_sink_f_impl() -diff --git a/gr-uhd/lib/usrp_block_impl.cc b/gr-uhd/lib/usrp_block_impl.cc -index 4f030159f..697d633c1 100644 ---- a/gr-uhd/lib/usrp_block_impl.cc -+++ b/gr-uhd/lib/usrp_block_impl.cc -@@ -137,12 +137,18 @@ usrp_block_impl::usrp_block_impl(const ::uhd::device_addr_t& device_addr, - // Set up message ports: - message_port_register_in(pmt::mp("command")); - set_msg_handler(pmt::mp("command"), -- boost::bind(&usrp_block_impl::msg_handler_command, this, _1)); -+ boost::bind(&usrp_block_impl::msg_handler_command, -+ this, -+ boost::placeholders::_1)); - - // cuz we lazy: --#define REGISTER_CMD_HANDLER(key, _handler) \ -- register_msg_cmd_handler(key, \ -- boost::bind(&usrp_block_impl::_handler, this, _1, _2, _3)) -+#define REGISTER_CMD_HANDLER(key, _handler) \ -+ register_msg_cmd_handler(key, \ -+ boost::bind(&usrp_block_impl::_handler, \ -+ this, \ -+ boost::placeholders::_1, \ -+ boost::placeholders::_2, \ -+ boost::placeholders::_3)) - // Register default command handlers: - REGISTER_CMD_HANDLER(cmd_freq_key(), _cmd_handler_freq); - REGISTER_CMD_HANDLER(cmd_gain_key(), _cmd_handler_gain); -@@ -257,11 +263,12 @@ bool usrp_block_impl::_check_mboard_sensors_locked() - } else if (_dev->get_clock_source(mboard_index) == "mimo") { - sensor_name = "mimo_locked"; - } -- if (not _wait_for_locked_sensor( -- get_mboard_sensor_names(mboard_index), -- sensor_name, -- boost::bind( -- &usrp_block_impl::get_mboard_sensor, this, _1, mboard_index))) { -+ if (not _wait_for_locked_sensor(get_mboard_sensor_names(mboard_index), -+ sensor_name, -+ boost::bind(&usrp_block_impl::get_mboard_sensor, -+ this, -+ boost::placeholders::_1, -+ mboard_index))) { - GR_LOG_WARN( - d_logger, - boost::format( -diff --git a/gr-uhd/lib/usrp_source_impl.cc b/gr-uhd/lib/usrp_source_impl.cc -index a2ff0821b..5e6bd4328 100644 ---- a/gr-uhd/lib/usrp_source_impl.cc -+++ b/gr-uhd/lib/usrp_source_impl.cc -@@ -57,8 +57,9 @@ usrp_source_impl::usrp_source_impl(const ::uhd::device_addr_t& device_addr, - - _samp_rate = this->get_samp_rate(); - _samps_per_packet = 1; -- register_msg_cmd_handler(cmd_tag_key(), -- boost::bind(&usrp_source_impl::_cmd_handler_tag, this, _1)); -+ register_msg_cmd_handler( -+ cmd_tag_key(), -+ boost::bind(&usrp_source_impl::_cmd_handler_tag, this, boost::placeholders::_1)); - } - - usrp_source_impl::~usrp_source_impl() {} -diff --git a/gr-zeromq/lib/pub_msg_sink_impl.cc b/gr-zeromq/lib/pub_msg_sink_impl.cc -index b5da7421e..957cfa411 100644 ---- a/gr-zeromq/lib/pub_msg_sink_impl.cc -+++ b/gr-zeromq/lib/pub_msg_sink_impl.cc -@@ -62,7 +62,9 @@ pub_msg_sink_impl::pub_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&pub_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&pub_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - pub_msg_sink_impl::~pub_msg_sink_impl() -diff --git a/gr-zeromq/lib/push_msg_sink_impl.cc b/gr-zeromq/lib/push_msg_sink_impl.cc -index 4140781ab..7d07d3a30 100644 ---- a/gr-zeromq/lib/push_msg_sink_impl.cc -+++ b/gr-zeromq/lib/push_msg_sink_impl.cc -@@ -62,7 +62,9 @@ push_msg_sink_impl::push_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&push_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&push_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - push_msg_sink_impl::~push_msg_sink_impl() --- -2.26.2 - diff --git a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch b/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch deleted file mode 100644 index 6b8987fa5f..0000000000 --- a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 84dea8284c521f08508bb2dcbc99db3b5d3438fd Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Thu, 27 Aug 2020 17:32:09 +0200 -Subject: [PATCH] gnuradio-runtime_pmt: dont hardcode - INTERFACE_INCLUDE_DIRECTORIES - -gnuradio-runtimeTargets.cmake and gnuradio-pmtTargets.cmake are filled -using CMAKE_INSTALL_PREFIX for INSTALL_INTERFACE. - -Since CMAKE_INSTALL_PREFIX, in buildroot, is set to /usr, these files contains -path to host system. - -With BR2_COMPILER_PARANOID_UNSAFE_PATH package using gnuradio fails with: -arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-isystem' '/usr/include' - -By simply providing 'include', produced .cmake contains: -INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" -instead of -INTERFACE_INCLUDE_DIRECTORIES "/usr/include" - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3737] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gnuradio-runtime/lib/CMakeLists.txt | 2 +- - gnuradio-runtime/lib/pmt/CMakeLists.txt | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gnuradio-runtime/lib/CMakeLists.txt b/gnuradio-runtime/lib/CMakeLists.txt -index 5aa90a5e1..fc32f473b 100644 ---- a/gnuradio-runtime/lib/CMakeLists.txt -+++ b/gnuradio-runtime/lib/CMakeLists.txt -@@ -214,7 +214,7 @@ target_link_libraries(gnuradio-runtime PUBLIC - - target_include_directories(gnuradio-runtime - PUBLIC -- $ -+ $ - $ - $ - PRIVATE -diff --git a/gnuradio-runtime/lib/pmt/CMakeLists.txt b/gnuradio-runtime/lib/pmt/CMakeLists.txt -index 9fb98d0fc..6dfcd945c 100644 ---- a/gnuradio-runtime/lib/pmt/CMakeLists.txt -+++ b/gnuradio-runtime/lib/pmt/CMakeLists.txt -@@ -33,7 +33,7 @@ target_link_libraries(gnuradio-pmt - - target_include_directories(gnuradio-pmt - PUBLIC -- $ -+ $ - $ - PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/ - ) --- -2.26.2 - diff --git a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch b/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch deleted file mode 100644 index 034c10c5cc..0000000000 --- a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 268b1a599304f58bd56c86ff09041b5912c24a0c Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Sun, 1 Nov 2020 17:24:36 +0100 -Subject: [PATCH] gr-qtgui: dont't add examples/c++ subdirectory when gr-analog - is disabled - -gr-qtgui examples needs to have gr-analog enabled, without this dependency -compile crash with: - -In file included from -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.cc:22: -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. -make[3]: *** [gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/build.make:67: -gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/display_qt.cc.o] Error 1 -make[3]: *** Waiting for unfinished jobs.... -In file included from -/somewhere/gnuradio/build/gr-qtgui/examples/c++/moc_display_qt.cpp:10: -/somewhere/gnuradio/build/gr-qtgui/examples/c++/../../../../gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. - -GR_ANALOG is not an explicit dependency of GR_QTGUI, so disable c++ examples if -user has not selected this option. - -[backported from 7470a7a3771dd90defb826b464dfe62977cb1eb6] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-qtgui/CMakeLists.txt | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/gr-qtgui/CMakeLists.txt b/gr-qtgui/CMakeLists.txt -index 8831f3ad9..561186fbd 100644 ---- a/gr-qtgui/CMakeLists.txt -+++ b/gr-qtgui/CMakeLists.txt -@@ -68,7 +68,9 @@ if(ENABLE_GR_QTGUI) - add_subdirectory(include/gnuradio/qtgui) - add_subdirectory(lib) - add_subdirectory(docs) --add_subdirectory(examples/c++) -+if (ENABLE_GR_ANALOG) -+ add_subdirectory(examples/c++) -+endif(ENABLE_GR_ANALOG) - if(ENABLE_PYTHON) - add_subdirectory(swig) - add_subdirectory(python/qtgui) --- -2.26.2 - diff --git a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch b/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch deleted file mode 100644 index 0c282b7322..0000000000 --- a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 2c767bb260a25b415e8c9c4b3ea37280b2127cec Mon Sep 17 00:00:00 2001 -From: japm48 -Date: Fri, 10 Apr 2020 23:35:30 +0200 -Subject: [PATCH] boost: remove deprecated math/common_factor.hpp - -Remove deprecation warning and prefer using std::{lcm,gcd} to Boost. -Fixes #2712. - -[Retrieved from: -https://github.com/gnuradio/gnuradio/commit/2c767bb260a25b415e8c9c4b3ea37280b2127cec] -Signed-off-by: Fabrice Fontaine ---- - .../include/gnuradio/CMakeLists.txt | 1 + - .../include/gnuradio/integer_math.h | 35 +++++++++++++++++++ - gnuradio-runtime/lib/buffer.cc | 19 ++-------- - gr-digital/lib/symbol_sync_cc_impl.cc | 4 +-- - gr-digital/lib/symbol_sync_ff_impl.cc | 4 +-- - 5 files changed, 43 insertions(+), 20 deletions(-) - create mode 100644 gnuradio-runtime/include/gnuradio/integer_math.h - -diff --git a/gnuradio-runtime/include/gnuradio/CMakeLists.txt b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -index 8d718e87b5b..056af5d6f48 100644 ---- a/gnuradio-runtime/include/gnuradio/CMakeLists.txt -+++ b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -@@ -31,6 +31,7 @@ install(FILES - gr_complex.h - hier_block2.h - high_res_timer.h -+ integer_math.h - io_signature.h - logger.h - math.h -diff --git a/gnuradio-runtime/include/gnuradio/integer_math.h b/gnuradio-runtime/include/gnuradio/integer_math.h -new file mode 100644 -index 00000000000..15141049fa4 ---- /dev/null -+++ b/gnuradio-runtime/include/gnuradio/integer_math.h -@@ -0,0 +1,35 @@ -+/* -*- c++ -*- */ -+/* -+ * Copyright 2020 Free Software Foundation, Inc. -+ * -+ * This file is part of GNU Radio -+ * -+ * SPDX-License-Identifier: GPL-3.0-or-later -+ * -+ */ -+#ifndef INCLUDED_GR_INTEGER_MATH_H -+#define INCLUDED_GR_INTEGER_MATH_H -+ -+#if (__cplusplus >= 201703L) -+ -+// Prefer C++17 goodness. -+#include -+#define GR_GCD std::gcd -+#define GR_LCM std::lcm -+ -+#elif (BOOST_VERSION >= 105800) -+ -+// Fallback: newer boost API (introduced in Boost 1.58.0). -+#include -+#define GR_GCD boost::integer::gcd -+#define GR_LCM boost::integer::lcm -+ -+#else -+ -+// Last resort: old deprecated boost API. -+#include -+#define GR_GCD boost::math::gcd -+#define GR_LCM boost::math::lcm -+ -+#endif /* __cplusplus >= 201703L */ -+#endif /* INCLUDED_GR_INTEGER_MATH_H */ -diff --git a/gnuradio-runtime/lib/buffer.cc b/gnuradio-runtime/lib/buffer.cc -index 720c72c4ee8..46d704542b1 100644 ---- a/gnuradio-runtime/lib/buffer.cc -+++ b/gnuradio-runtime/lib/buffer.cc -@@ -13,22 +13,13 @@ - #endif - #include "vmcircbuf.h" - #include -+#include - #include - #include - #include - #include - #include - --// the following header is deprecated as of Boost 1.66.0, and the --// other API was introduced in Boost 1.58.0. Since we still support --// Boost back to 1.54.0, use the older API if pre-1.5.80 and otherwise --// use the newer API. --#if (BOOST_VERSION < 105800) --#include --#else --#include --#endif -- - namespace gr { - - static long s_buffer_count = 0; // counts for debugging storage mgmt -@@ -68,13 +59,9 @@ static long s_buffer_reader_count = 0; - * - * type_size * nitems == k * page_size - */ --static long minimum_buffer_items(long type_size, long page_size) -+static inline long minimum_buffer_items(long type_size, long page_size) - { --#if (BOOST_VERSION < 105800) -- return page_size / boost::math::gcd(type_size, page_size); --#else -- return page_size / boost::integer::gcd(type_size, page_size); --#endif -+ return page_size / GR_GCD(type_size, page_size); - } - - -diff --git a/gr-digital/lib/symbol_sync_cc_impl.cc b/gr-digital/lib/symbol_sync_cc_impl.cc -index 55f85e7c6a7..55f162dc727 100644 ---- a/gr-digital/lib/symbol_sync_cc_impl.cc -+++ b/gr-digital/lib/symbol_sync_cc_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_cc_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -95,7 +95,7 @@ symbol_sync_cc_impl::symbol_sync_cc_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_ccf"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - -diff --git a/gr-digital/lib/symbol_sync_ff_impl.cc b/gr-digital/lib/symbol_sync_ff_impl.cc -index d0ec32ab192..1172c1b4f8a 100644 ---- a/gr-digital/lib/symbol_sync_ff_impl.cc -+++ b/gr-digital/lib/symbol_sync_ff_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_ff_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -97,7 +97,7 @@ symbol_sync_ff_impl::symbol_sync_ff_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_fff"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - diff --git a/package/gnuradio/Config.in b/package/gnuradio/Config.in index 103175946c..2d17fc087f 100644 --- a/package/gnuradio/Config.in +++ b/package/gnuradio/Config.in @@ -15,19 +15,19 @@ config BR2_PACKAGE_GNURADIO depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-filesystem + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-thread depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # boost-thread select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_ATOMIC select BR2_PACKAGE_BOOST_DATE_TIME - select BR2_PACKAGE_BOOST_FILESYSTEM select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS select BR2_PACKAGE_BOOST_REGEX select BR2_PACKAGE_BOOST_SYSTEM select BR2_PACKAGE_BOOST_THREAD select BR2_PACKAGE_LOG4CPP select BR2_PACKAGE_GMP + select BR2_PACKAGE_SPDLOG select BR2_PACKAGE_VOLK help GNU Radio is a free & open-source software development diff --git a/package/gnuradio/gnuradio.hash b/package/gnuradio/gnuradio.hash index 90343cf385..efa0bb462b 100644 --- a/package/gnuradio/gnuradio.hash +++ b/package/gnuradio/gnuradio.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3e293541a9ac8d78660762bae8b80c0f6195b3494e1c50c01a9fd79cc60bb624 gnuradio-3.8.2.0.tar.gz +sha256 c6b9f59447a842559b00b3a67b4ca1186e9adb8db742b25400507fedc747f2bd gnuradio-3.10.4.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gnuradio/gnuradio.mk b/package/gnuradio/gnuradio.mk index e36dce081c..cc41f1e12b 100644 --- a/package/gnuradio/gnuradio.mk +++ b/package/gnuradio/gnuradio.mk @@ -4,22 +4,19 @@ # ################################################################################ -GNURADIO_VERSION = 3.8.2.0 -GNURADIO_SITE = https://github.com/gnuradio/gnuradio/releases/download/v$(GNURADIO_VERSION) +GNURADIO_VERSION = 3.10.4.0 +GNURADIO_SITE = $(call github,gnuradio,gnuradio,v$(GNURADIO_VERSION)) GNURADIO_LICENSE = GPL-3.0+ GNURADIO_LICENSE_FILES = COPYING GNURADIO_SUPPORTS_IN_SOURCE_BUILD = NO -# host-python-mako and host-python-six are needed for volk to compile GNURADIO_DEPENDENCIES = \ host-python3 \ - host-python-mako \ - host-python-six \ - host-swig \ boost \ log4cpp \ gmp \ + spdlog \ volk GNURADIO_CONF_OPTS = \ @@ -115,7 +112,8 @@ GNURADIO_CONF_OPTS += -DENABLE_GR_FILTER=OFF endif ifeq ($(BR2_PACKAGE_GNURADIO_PYTHON),y) -GNURADIO_DEPENDENCIES += python3 +GNURADIO_DEPENDENCIES += python3 python-pybind \ + host-python-numpy host-python-packaging GNURADIO_CONF_OPTS += -DENABLE_PYTHON=ON # mandatory to install python modules in site-packages and to use # correct path for python libraries -- 2.30.2 From aperez at igalia.com Thu Oct 6 09:58:28 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:28 +0300 Subject: [Buildroot] [PATCH v3 0/5] Update WPE WebKit to 2.36.8, and then 2.38.0 In-Reply-To: <20221004133057.2003750-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-1-aperez@igalia.com> This series bump wpewebkit to the 2.36.8 release first, which includes security updates. Then the set of packages needed to run WPE (libwpe, wpebackend-fdo, cog) are updated to the recommended versions for the 2.38.x series, as documented at: https://wpewebkit.org/release/schedule/#compatible-components The separate patch with the 2.36.8 update is intended to be cherry picked into stable branches, as it does not need newer tools (compiler, C++ standard library, CMake, etc.) =) Adrian Perez de Castro (5): package/wpewebkit: security bump to version 2.36.8 package/libwpe: bump to version 1.14.0 package/wpebackend-fdo: bump to version 1.14.0 package/wpewebkit: bump to version 2.38.0 package/cog: bump to version 0.16.0 ...m-dependency-when-protocols-are-used.patch | 36 ++ package/cog/cog.hash | 8 +- package/cog/cog.mk | 37 +- package/libwpe/libwpe.hash | 8 +- package/libwpe/libwpe.mk | 2 +- package/wpebackend-fdo/wpebackend-fdo.hash | 8 +- package/wpebackend-fdo/wpebackend-fdo.mk | 2 +- ...cpp-fails-to-build-NEON-fast-path-se.patch | 328 ++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 8 +- 10 files changed, 407 insertions(+), 38 deletions(-) create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch create mode 100644 package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch --- Changes v2 -> v3: - Fixed Cog build due to incorrect Meson option usage (pointed out by Gary Bisson). - Add Cog patch to fix picking libdrm headers correctly (also Gary Bisson). --- Changes v1 -> v2: - Added a first patch with a 2.36.8 update (suggested by Thomas Petazzoni). - Added a 2.36.x version of the ARM NEON build fix (suggested by Michael Nostoff). - Added one additional patch updating cog to 0.16.0, which has been released in the interim. -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:29 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:29 +0300 Subject: [Buildroot] [PATCH v3 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-2-aperez@igalia.com> Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro --- ...cpp-fails-to-build-NEON-fast-path-se.patch | 314 ++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) create mode 100644 package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:31 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:31 +0300 Subject: [Buildroot] [PATCH v3 3/5] package/wpebackend-fdo: bump to version 1.14.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-4-aperez@igalia.com> This new version contains only small fixes after 1.12.1. Release notes: https://wpewebkit.org/release/wpebackend-fdo-1.14.0.html Signed-off-by: Adrian Perez de Castro --- package/wpebackend-fdo/wpebackend-fdo.hash | 8 ++++---- package/wpebackend-fdo/wpebackend-fdo.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/wpebackend-fdo/wpebackend-fdo.hash b/package/wpebackend-fdo/wpebackend-fdo.hash index 49c60fce0f..e2f2c6c89f 100644 --- a/package/wpebackend-fdo/wpebackend-fdo.hash +++ b/package/wpebackend-fdo/wpebackend-fdo.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpebackend-fdo-1.12.1.tar.xz.sums -md5 494f4a5b2bd89dacef37b69534b2e1ce wpebackend-fdo-1.12.1.tar.xz -sha1 72a85e4615e085926f7ad8fc8414f9c6a878ef28 wpebackend-fdo-1.12.1.tar.xz -sha256 45aa833c44ec292f31fa943b01b8cc75e54eb623ad7ba6a66fc2f118fe69e629 wpebackend-fdo-1.12.1.tar.xz +# From https://wpewebkit.org/releases/wpebackend-fdo-1.14.0.tar.xz.sums +md5 ea62dfa9ecb366598a837d7446ed48ac wpebackend-fdo-1.14.0.tar.xz +sha1 1500be9212381a404f4a46b22b90a9880ba11c01 wpebackend-fdo-1.14.0.tar.xz +sha256 e75b0cb2c7145448416e8696013d8883f675c66c11ed750e06865efec5809155 wpebackend-fdo-1.14.0.tar.xz # Hashes for license files: sha256 c9f6803371047fad3e72200ec6cd226329a5ee08ac61104c8211c2761fb46825 COPYING diff --git a/package/wpebackend-fdo/wpebackend-fdo.mk b/package/wpebackend-fdo/wpebackend-fdo.mk index 2e2bdee94e..afe37b086e 100644 --- a/package/wpebackend-fdo/wpebackend-fdo.mk +++ b/package/wpebackend-fdo/wpebackend-fdo.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEBACKEND_FDO_VERSION = 1.12.1 +WPEBACKEND_FDO_VERSION = 1.14.0 WPEBACKEND_FDO_SITE = https://wpewebkit.org/releases WPEBACKEND_FDO_SOURCE = wpebackend-fdo-$(WPEBACKEND_FDO_VERSION).tar.xz WPEBACKEND_FDO_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:30 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:30 +0300 Subject: [Buildroot] [PATCH v3 2/5] package/libwpe: bump to version 1.14.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-3-aperez@igalia.com> This version is the first stable release with support for gamepad input events and configuring target frame rates. These will be used by a follow-up update of the wpewebkit package. Release notes: https://wpewebkit.org/release/libwpe-1.14.0.html Signed-off-by: Adrian Perez de Castro --- package/libwpe/libwpe.hash | 8 ++++---- package/libwpe/libwpe.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/libwpe/libwpe.hash b/package/libwpe/libwpe.hash index 2bbe1f0749..28b7685b93 100644 --- a/package/libwpe/libwpe.hash +++ b/package/libwpe/libwpe.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/libwpe-1.12.3.tar.xz.sums -md5 e538eb8e521d92f2bde3c4cd864abaa1 libwpe-1.12.3.tar.xz -sha1 9d94c411a502a10e68f69bd1fa273539cc6af2ca libwpe-1.12.3.tar.xz -sha256 b84fdbfbc849ce4fdf084bb28b58e5463b1b4b6cc8f200dc77b41f8545d5329d libwpe-1.12.3.tar.xz +# From https://wpewebkit.org/releases/libwpe-1.14.0.tar.xz.sums +md5 f9737912975f979f9e4e01eec174a271 libwpe-1.14.0.tar.xz +sha1 7a5d51c99254fc14ffcbcca9e8550cc7940fe871 libwpe-1.14.0.tar.xz +sha256 c073305bbac5f4402cc1c8a4753bfa3d63a408901f86182051eaa5a75dd89c00 libwpe-1.14.0.tar.xz # Hashes for license files: sha256 35bef295cedbbf179eaee14328002587a0e7dc08ebf3f15ea080a6f2815f0d7b COPYING diff --git a/package/libwpe/libwpe.mk b/package/libwpe/libwpe.mk index ac533642d9..e7b3ce9eaf 100644 --- a/package/libwpe/libwpe.mk +++ b/package/libwpe/libwpe.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBWPE_VERSION = 1.12.3 +LIBWPE_VERSION = 1.14.0 LIBWPE_SITE = https://wpewebkit.org/releases LIBWPE_SOURCE = libwpe-$(LIBWPE_VERSION).tar.xz LIBWPE_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:32 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:32 +0300 Subject: [Buildroot] [PATCH v3 4/5] package/wpewebkit: bump to version 2.38.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-5-aperez@igalia.com> Update to a new major release which brings in improvements and a few new features. Release notes: https://wpewebkit.org/release/wpewebkit-2.38.0.html This release also includes security fixes for CVE-2022-32886, CVE-2022-32891, and CVE-2022-32912. Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html Both building documentation and support for gobject-introspection have been added in this release. Version 2.38.0 also introduces a new WebRTC implementation based on GstWebRTC. Options for them are explicitly left disabled to keep the configuration as it was, and may be enabled in follow-up patches. Lastly, the SILENCE_CROSS_COMPILATION_NOTICES option removed because it no longer exists. The patch that fixes the build on 32-bit ARM targets is also updated for the 2.38 release series. Signed-off-by: Adrian Perez de Castro --- ...cpp-fails-to-build-NEON-fast-path-se.patch | 30 ++++++++++++++----- package/wpewebkit/wpewebkit.hash | 8 ++--- package/wpewebkit/wpewebkit.mk | 8 +++-- 3 files changed, 31 insertions(+), 15 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch index b61909b2ac..ea1676abb6 100644 --- a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -1,4 +1,4 @@ -From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From da159b0150cba0e5e5251e4cc6a090440f73cb7c Mon Sep 17 00:00:00 2001 From: Adrian Perez de Castro Date: Thu, 2 Jun 2022 11:19:06 +0300 Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems @@ -35,15 +35,28 @@ left for a follow-up fix. Signed-off-by: Adrian Perez de Castro [Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] --- + Source/WebCore/Sources.txt | 1 + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- - .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/cpu/arm/filters/FELightingNEON.h | 54 +++++++++---------- .../graphics/filters/DistantLightSource.h | 4 ++ .../platform/graphics/filters/FELighting.h | 7 --- .../graphics/filters/PointLightSource.h | 4 ++ .../graphics/filters/SpotLightSource.h | 4 ++ .../software/FELightingSoftwareApplier.h | 16 ++++++ - 7 files changed, 56 insertions(+), 35 deletions(-) + 8 files changed, 58 insertions(+), 36 deletions(-) +diff --git a/Source/WebCore/Sources.txt b/Source/WebCore/Sources.txt +index 8ce3510fe1a8..efd56bcb8746 100644 +--- a/Source/WebCore/Sources.txt ++++ b/Source/WebCore/Sources.txt +@@ -2136,6 +2136,7 @@ platform/graphics/WebMResourceClient.cpp + platform/graphics/WOFFFileFormat.cpp + platform/graphics/WidthIterator.cpp + platform/graphics/cpu/arm/filters/FEBlendNeonApplier.cpp ++platform/graphics/cpu/arm/filters/FELightingNEON.cpp + platform/graphics/displaylists/DisplayList.cpp + platform/graphics/displaylists/DisplayListDrawingContext.cpp + platform/graphics/displaylists/DisplayListItems.cpp diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp index f6ff8c20a5a8..42a97ffc5372 100644 --- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp @@ -67,7 +80,7 @@ index f6ff8c20a5a8..42a97ffc5372 100644 // Calling a powf function from the assembly code would require to save // and reload a lot of NEON registers. Since the base is in range [0..1] diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h -index b17c603d40d3..e4629cda0b7c 100644 +index b17c603d40d3..c6d17f573eca 100644 --- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h @@ -24,14 +24,15 @@ @@ -98,9 +111,10 @@ index b17c603d40d3..e4629cda0b7c 100644 { - alignas(16) FELightingFloatArgumentsForNeon floatArguments; - FELightingPaintingDataForNeon neonData = { +- data.pixels->data(), + WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; + WebCore::FELightingPaintingDataForNeon neonData = { - data.pixels->data(), ++ data.pixels->bytes(), 1, - data.widthDecreasedByOne - 1, - data.heightDecreasedByOne - 1, @@ -244,7 +258,7 @@ index 0c073bc13f8c..e0db00545c17 100644 float m_surfaceScale; float m_diffuseConstant; diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h -index 5c9c7fb783e6..e53aa012ac1c 100644 +index 126b3b2350f6..d906db21aa9c 100644 --- a/Source/WebCore/platform/graphics/filters/PointLightSource.h +++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h @@ -26,6 +26,10 @@ @@ -259,7 +273,7 @@ index 5c9c7fb783e6..e53aa012ac1c 100644 class PointLightSource : public LightSource { diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h -index 04e331ec4ec0..763c8d400b00 100644 +index 641b205f986d..64380d9b6eb8 100644 --- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h +++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h @@ -26,6 +26,10 @@ @@ -274,7 +288,7 @@ index 04e331ec4ec0..763c8d400b00 100644 class SpotLightSource : public LightSource { diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h -index 3875b0a4b5de..6d3864aafb9a 100644 +index c974d92115ff..e2896660cfbd 100644 --- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h @@ -36,6 +36,7 @@ diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 9c8beecf2e..5dd64b34b7 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums -md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz -sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz -sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.38.0.tar.xz.sums +md5 e0e6b98c86351c39e41da475afc50780 wpewebkit-2.38.0.tar.xz +sha1 66e6dd1c285a21ce50370fb4d60332838d801663 wpewebkit-2.38.0.tar.xz +sha256 e653e12eca63e6371c06d4cd9efcd5492db67f7d9ef324fd5d8668b1151e72b2 wpewebkit-2.38.0.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index 0ff8204519..001c701ee9 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.8 +WPEWEBKIT_VERSION = 2.38.0 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES @@ -22,9 +22,11 @@ WPEWEBKIT_CONF_OPTS = \ -DPORT=WPE \ -DENABLE_ACCESSIBILITY=OFF \ -DENABLE_API_TESTS=OFF \ + -DENABLE_DOCUMENTATION=OFF \ + -DENABLE_INTROSPECTION=OFF \ -DENABLE_MINIBROWSER=OFF \ - -DUSE_SOUP2=ON \ - -DSILENCE_CROSS_COMPILATION_NOTICES=ON + -DENABLE_WEB_RTC=OFF \ + -DUSE_SOUP2=ON ifeq ($(BR2_PACKAGE_WPEWEBKIT_SANDBOX),y) WPEWEBKIT_CONF_OPTS += \ -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:33 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:33 +0300 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-6-aperez@igalia.com> This new version includes support for setting proxy options and gamepad support. Release notes: https://wpewebkit.org/release/cog-0.16.0.html This imports a small patch to properly pick libdrm compiler flags, fetched from the upstream repository. Signed-off-by: Adrian Perez de Castro --- ...m-dependency-when-protocols-are-used.patch | 36 ++++++++++++++++++ package/cog/cog.hash | 8 ++-- package/cog/cog.mk | 37 ++++++++++--------- 3 files changed, 60 insertions(+), 21 deletions(-) create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch diff --git a/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch new file mode 100644 index 0000000000..44e555c121 --- /dev/null +++ b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch @@ -0,0 +1,36 @@ +From 9a1982c563e218b7695e6a174c8230d3b063eb27 Mon Sep 17 00:00:00 2001 +From: Gary Bisson +Date: Thu, 6 Oct 2022 09:04:22 +0200 +Subject: [PATCH] wl: Fix libdrm dependency when protocols are used + +As the comment says, cog-platform-wl.c needs drm_fourcc.h to build +properly when wayland_weston_direct_display is enabled. + +However, libdrm.pc doesn't specify "include/libdrm" as part of its +includedir but whether in its cflags. So use the compile_args dep +instead of includes to fix the build failure. + +Signed-off-by: Gary Bisson +(cherry picked from commit 32c1d9533bcdc22cbc01d02bf2e6ac0d4bda2dc2) +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://github.com/Igalia/cog/pull/501] +--- + platform/wayland/meson.build | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/platform/wayland/meson.build b/platform/wayland/meson.build +index f1e18ec..31e4460 100644 +--- a/platform/wayland/meson.build ++++ b/platform/wayland/meson.build +@@ -67,7 +67,7 @@ if wayland_platform_weston_protocols.length() > 0 + + # The code uses definitions from the drm_fourcc.h header, but does not + # need to link the library; libdrm here is only a build-time dependency. +- wayland_platform_dependencies += [dependency('libdrm').partial_dependency(includes: true)] ++ wayland_platform_dependencies += [dependency('libdrm').partial_dependency(compile_args: true)] + endif + + +-- +2.38.0 + diff --git a/package/cog/cog.hash b/package/cog/cog.hash index aa128d73d8..a2c55c4b94 100644 --- a/package/cog/cog.hash +++ b/package/cog/cog.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz # Hashes for license files: sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING diff --git a/package/cog/cog.mk b/package/cog/cog.mk index 1f24bebee4..241c4e309c 100644 --- a/package/cog/cog.mk +++ b/package/cog/cog.mk @@ -4,7 +4,7 @@ # ################################################################################ -COG_VERSION = 0.14.1 +COG_VERSION = 0.16.0 COG_SITE = https://wpewebkit.org/releases COG_SOURCE = cog-$(COG_VERSION).tar.xz COG_INSTALL_STAGING = YES @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland COG_LICENSE = MIT COG_LICENSE_FILES = COPYING COG_CONF_OPTS = \ - -DCOG_BUILD_PROGRAMS=ON \ - -DCOG_PLATFORM_HEADLESS=ON \ - -DINSTALL_MAN_PAGES=OFF \ - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ - -DUSE_SOUP2=ON + -Ddocumentation=false \ + -Dmanpages=false \ + -Dprograms=true \ + -Dsoup2=enabled \ + -Dcog_home_uri='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ + -Dplatforms='$(subst $(space),$(comma),$(strip $(COG_PLATFORMS_LIST)))' + +COG_PLATFORMS_LIST = headless ifeq ($(BR2_PACKAGE_WESTON),y) -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=ON +COG_CONF_OPTS += -Dwayland_weston_direct_display=true COG_DEPENDENCIES += weston else -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=OFF +COG_CONF_OPTS += -Dwayland_weston_direct_display=false endif ifeq ($(BR2_PACKAGE_COG_PLATFORM_FDO),y) -COG_CONF_OPTS += -DCOG_PLATFORM_WL=ON +COG_PLATFORMS_LIST += wayland COG_DEPENDENCIES += libxkbcommon wayland-protocols -else -COG_CONF_OPTS += -DCOG_PLATFORM_WL=OFF endif ifeq ($(BR2_PACKAGE_COG_PLATFORM_DRM),y) -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=ON +COG_PLATFORMS_LIST += drm COG_DEPENDENCIES += libdrm libinput libgbm libegl udev -else -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=OFF endif ifeq ($(BR2_PACKAGE_COG_USE_SYSTEM_DBUS),y) -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=ON +COG_CONF_OPTS += -Dcog_dbus_control=system else -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=OFF +COG_CONF_OPTS += -Dcog_dbus_control=user endif -$(eval $(cmake-package)) +ifeq ($(BR2_PACKAGE_LIBMANETTE),y) +COG_DEPENDENCIES += libmanette +endif + +$(eval $(meson-package)) -- 2.38.0 From quentin.schulz at theobroma-systems.com Thu Oct 6 13:18:17 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Thu, 6 Oct 2022 15:18:17 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patch files In-Reply-To: <20221003122421.39868-1-dumasv.dev@gmail.com> References: <20221003122421.39868-1-dumasv.dev@gmail.com> Message-ID: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> Hi Victor, On 10/3/22 14:24, Victor Dumas wrote: > From: vdumas > > Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine > That's the kind of numbers I like to read :) > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 60 ++++++++++++++++++++++----------------- > 1 file changed, 34 insertions(+), 26 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..c842da7013 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -125,32 +157,8 @@ main() { > > find_args+=( "-type" "f" "-print" ) > > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + export -f patch_file > + xargs -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} < <(find "${rootdir}" ${find_args[@]}) > find "${rootdir}" ${find_args[@]} -print0 | xargs -0 is probably more readable and the way it's intended to be used, c.f. second example in https://www.man7.org/linux/man-pages/man1/find.1.html#EXAMPLES Also, xargs manpage https://www.man7.org/linux/man-pages/man1/xargs.1.html#OPTIONS specifies that -P option should be used in conjunction with -L or -n to avoid spawning only one process (admittedly can't be worse than the current implementation but could be better than the suggested one). You probably also want xargs -r in the unlikely event there's no file found by find. Cheers, Quentin From tianyuanhao3 at 163.com Thu Oct 6 14:07:54 2022 From: tianyuanhao3 at 163.com (TIAN Yuanhao) Date: Thu, 6 Oct 2022 07:07:54 -0700 Subject: [Buildroot] [PATCH 1/1] package/crun: support crun as runtime in containerd Message-ID: <20221006140754.46144-1-tianyuanhao3@163.com> Create runc symlink to crun when runc is missing. See: https://github.com/containerd/containerd/discussions/6162 Signed-off-by: TIAN Yuanhao --- package/containerd/Config.in | 2 +- package/crun/crun.mk | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/package/containerd/Config.in b/package/containerd/Config.in index 0e3a55ef39..e69dd6768a 100644 --- a/package/containerd/Config.in +++ b/package/containerd/Config.in @@ -5,7 +5,7 @@ config BR2_PACKAGE_CONTAINERD depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC # runc depends on BR2_USE_MMU # util-linux - select BR2_PACKAGE_RUNC # runtime dependency + select BR2_PACKAGE_RUNC if !BR2_PACKAGE_CRUN # runtime dependency select BR2_PACKAGE_UTIL_LINUX # runtime dependency select BR2_PACKAGE_UTIL_LINUX_BINARIES select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT diff --git a/package/crun/crun.mk b/package/crun/crun.mk index 4a0c150594..19dda71a9f 100644 --- a/package/crun/crun.mk +++ b/package/crun/crun.mk @@ -36,4 +36,11 @@ else CRUN_CONF_OPTS += --disable-systemd endif +ifeq ($(BR2_PACKAGE_RUNC),) +define CRUN_CREATE_SYMLINK + ln -sf crun $(TARGET_DIR)/usr/bin/runc +endef +CRUN_POST_INSTALL_TARGET_HOOKS += CRUN_CREATE_SYMLINK +endif + $(eval $(autotools-package)) -- 2.25.1 From dumasv.dev at gmail.com Thu Oct 6 15:52:17 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 6 Oct 2022 17:52:17 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> References: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> Message-ID: <20221006155217.626248-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 26 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..c9d40e1cce 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -125,32 +159,8 @@ main() { find_args+=( "-type" "f" "-print" ) - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + export -f patch_file + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From peter at korsgaard.com Thu Oct 6 17:55:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:55:41 +0200 Subject: [Buildroot] [PATCH] linux: update cip/cip-rt kernels to version 5.10.145-cip17 In-Reply-To: <20221004153056.486957-1-angelo@amarulasolutions.com> (Angelo Compagnucci's message of "Tue, 4 Oct 2022 17:30:56 +0200") References: <20221004153056.486957-1-angelo@amarulasolutions.com> Message-ID: <87a668u99e.fsf@dell.be.48ers.dk> >>>>> "Angelo" == Angelo Compagnucci writes: > Signed-off-by: Angelo Compagnucci Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:55:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:55:52 +0200 Subject: [Buildroot] [PATCH 01/11] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 In-Reply-To: <20221004195039.931947-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 4 Oct 2022 21:50:29 +0200") References: <20221004195039.931947-1-peter@korsgaard.com> Message-ID: <875ygwu993.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for > 5.17.x headers). > Signed-off-by: Peter Korsgaard Committed series, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:57:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:57:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 In-Reply-To: <20221002211910.9526-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 2 Oct 2022 23:19:10 +0200") References: <20221002211910.9526-1-fontaine.fabrice@gmail.com> Message-ID: <871qrku969.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 > https://github.com/emikulic/darkhttpd/releases/tag/v1.14 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:58:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:58:06 +0200 Subject: [Buildroot] [PATCH] package/htpdate: bump to version 1.3.6 In-Reply-To: <20221003150939.3243425-1-angelo@amarulasolutions.com> (Angelo Compagnucci's message of "Mon, 3 Oct 2022 17:09:39 +0200") References: <20221003150939.3243425-1-angelo@amarulasolutions.com> Message-ID: <87wn9csukx.fsf@dell.be.48ers.dk> >>>>> "Angelo" == Angelo Compagnucci writes: > Signed-off-by: Angelo Compagnucci Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:59:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:59:18 +0200 Subject: [Buildroot] [PATCH] package/acpica: fix legal-info In-Reply-To: <20221004104056.1429815-1-nunes.erico@gmail.com> (Erico Nunes's message of "Tue, 4 Oct 2022 12:40:56 +0200") References: <20221004104056.1429815-1-nunes.erico@gmail.com> Message-ID: <87sfk0suix.fsf@dell.be.48ers.dk> >>>>> "Erico" == Erico Nunes writes: > Since the recent version bump, the license file is changed as it was > updated to the new release year. > Fixes: > http://autobuild.buildroot.net/results/93ad774a7f69e761952a3a6c92a24de7506e6312/ > Signed-off-by: Erico Nunes Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:53:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:24 +0200 Subject: [Buildroot] [git commit] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 Message-ID: <20221006175948.ED8CB86934@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=484b50507f31e90a3f955698ad10e7aad6f91b37 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for 5.17.x headers). Signed-off-by: Peter Korsgaard --- toolchain/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/toolchain/Config.in b/toolchain/Config.in index b48c69dc41..219578092b 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -580,6 +580,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 default "5.14" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 From peter at korsgaard.com Thu Oct 6 17:53:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:35 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 5.19 headers Message-ID: <20221006175949.1439886937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0551f23b05996d92c65c359ed6daa2cd15502aba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master And add (and default to) 5.19.13 to linux-headers. Signed-off-by: Peter Korsgaard --- linux/linux.hash | 1 + package/linux-headers/Config.in.host | 13 +++++++++++-- toolchain/Config.in | 5 +++++ .../toolchain-external-custom/Config.in.options | 6 +++++- 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index a1b7984489..9e75877be9 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,4 +1,5 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc +sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 9d993a2e99..856c7fd7b1 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_LINUX_HEADERS choice prompt "Kernel Headers" default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL - default BR2_KERNEL_HEADERS_5_17 + default BR2_KERNEL_HEADERS_5_19 help Select the kernel version to get headers from. @@ -56,6 +56,10 @@ config BR2_KERNEL_HEADERS_5_15 config BR2_KERNEL_HEADERS_5_17 bool "Linux 5.17.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 + +config BR2_KERNEL_HEADERS_5_19 + bool "Linux 5.19.x kernel headers" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 select BR2_KERNEL_HEADERS_LATEST config BR2_KERNEL_HEADERS_VERSION @@ -133,8 +137,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19 + bool "5.19.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 - bool "5.18.x or later" + bool "5.18.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17 @@ -387,6 +395,7 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.10.142" if BR2_KERNEL_HEADERS_5_10 default "5.15.67" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 + default "5.19.13" if BR2_KERNEL_HEADERS_5_19 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ diff --git a/toolchain/Config.in b/toolchain/Config.in index c49691cff2..0801a3c516 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -571,6 +571,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -584,6 +588,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 16f1ac0a5e..494e67516f 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_19 + bool "5.19.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 - bool "5.18.x or later" + bool "5.18.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_17 From peter at korsgaard.com Thu Oct 6 17:53:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:31 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 5.18 headers Message-ID: <20221006175949.0AA3486936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db678645eb1702e007414a9e9d5073d541a7c6d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Do not add a preconfigured 5.18.x version to linux-headers as 5.18.x is already EOL. Signed-off-by: Peter Korsgaard --- package/linux-headers/Config.in.host | 6 +++++- toolchain/Config.in | 5 +++++ .../toolchain-external/toolchain-external-custom/Config.in.options | 6 +++++- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index ab59bdd368..9d993a2e99 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -133,8 +133,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 + bool "5.18.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17 - bool "5.17.x or later" + bool "5.17.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16 diff --git a/toolchain/Config.in b/toolchain/Config.in index 219578092b..c49691cff2 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -567,6 +567,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -580,6 +584,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 6727778f42..16f1ac0a5e 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 + bool "5.18.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_17 - bool "5.17.x or later" + bool "5.17.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_16 From peter at korsgaard.com Thu Oct 6 17:53:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:40 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 6.0 headers Message-ID: <20221006175949.1DFDA86938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4613b7aaf023607e8a1f3957b78a816e2e3a5905 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master And add (and default to) 6.0 to linux-headers. Signed-off-by: Peter Korsgaard --- linux/linux.hash | 2 ++ package/linux-headers/Config.in.host | 13 +++++++++++-- toolchain/Config.in | 5 +++++ .../toolchain-external-custom/Config.in.options | 6 +++++- 4 files changed, 23 insertions(+), 3 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index 9e75877be9..dde8e5c54c 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,3 +1,5 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 856c7fd7b1..4847cd4c87 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_LINUX_HEADERS choice prompt "Kernel Headers" default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL - default BR2_KERNEL_HEADERS_5_19 + default BR2_KERNEL_HEADERS_6_0 help Select the kernel version to get headers from. @@ -60,6 +60,10 @@ config BR2_KERNEL_HEADERS_5_17 config BR2_KERNEL_HEADERS_5_19 bool "Linux 5.19.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + +config BR2_KERNEL_HEADERS_6_0 + bool "Linux 6.0.x kernel headers" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 select BR2_KERNEL_HEADERS_LATEST config BR2_KERNEL_HEADERS_VERSION @@ -137,8 +141,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0 + bool "6.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19 - bool "5.19.x or later" + bool "5.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 @@ -396,6 +404,7 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.15.67" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default "5.19.13" if BR2_KERNEL_HEADERS_5_19 + default "6.0" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ diff --git a/toolchain/Config.in b/toolchain/Config.in index 0801a3c516..23596d6c85 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -575,6 +575,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -588,6 +592,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.0" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 default "5.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 494e67516f..a9cb61365f 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_0 + bool "6.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_19 - bool "5.19.x or later" + bool "5.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 From peter at korsgaard.com Thu Oct 6 17:53:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:44 +0200 Subject: [Buildroot] [git commit] linux: bump _KERNEL_LATEST_VERSION to 6.0 Message-ID: <20221006175949.2700186934@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=374e39b6344246b94d58750bcf20f3f61f8e9078 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- linux/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index de9bf0ad7a..029976569e 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -28,8 +28,8 @@ choice prompt "Kernel version" config BR2_LINUX_KERNEL_LATEST_VERSION - bool "Latest version (5.17)" - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 if BR2_KERNEL_HEADERS_AS_KERNEL + bool "Latest version (6.0)" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION bool "Latest CIP SLTS version (5.10.115-cip7)" @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "5.17.15" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ From peter at korsgaard.com Thu Oct 6 17:55:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:55:21 +0200 Subject: [Buildroot] [git commit] linux: update cip/cip-rt kernels to version 5.10.145-cip17 Message-ID: <20221006175949.6AB3686936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=baca1e12baaf3ecd06dbfe3a74c8f2883099b955 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Peter Korsgaard --- linux/Config.in | 8 ++++---- linux/linux.hash | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index 029976569e..f9caa3c652 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -32,7 +32,7 @@ config BR2_LINUX_KERNEL_LATEST_VERSION select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION - bool "Latest CIP SLTS version (5.10.115-cip7)" + bool "Latest CIP SLTS version (5.10.145-cip17)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help CIP launched in the spring of 2016 to address the needs of @@ -52,7 +52,7 @@ config BR2_LINUX_KERNEL_LATEST_CIP_VERSION https://www.cip-project.org config BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION - bool "Latest CIP RT SLTS version (5.10.109-cip5-rt4)" + bool "Latest CIP RT SLTS version (5.10.145-cip17-rt7)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help Same as the CIP version, but this is the PREEMPT_RT realtime @@ -129,8 +129,8 @@ endif config BR2_LINUX_KERNEL_VERSION string default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION - default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION - default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION + default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION + default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ if BR2_LINUX_KERNEL_CUSTOM_VERSION default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL diff --git a/linux/linux.hash b/linux/linux.hash index dde8e5c54c..07963f185e 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -11,8 +11,8 @@ sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux- sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz # Locally computed -sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz -sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz +sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz +sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz # Licenses hashes sha256 fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0 COPYING From peter at korsgaard.com Thu Oct 6 17:54:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:00 +0200 Subject: [Buildroot] [git commit] mender_x86_64_efi_defconfig: specify 5.18 kernel headers Message-ID: <20221006175949.441A586937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b35597decbef4a26dcb662028357d2ac51b0978f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfig uses a 5.18.4 kernel, so specify 5.18 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/mender_x86_64_efi_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 6919a60c90..2ec6f6f76c 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -2,7 +2,7 @@ BR2_x86_64=y # Toolchain -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18=y # System BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" From peter at korsgaard.com Thu Oct 6 17:54:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:13 +0200 Subject: [Buildroot] [git commit] qemu_riscv64_nommu_virt_defconfig: specify kernel headers version Message-ID: <20221006175949.583588680C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=61c8dfe7d7090c004a3d766f8a2473141ce676f9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs uses a 5.19 kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/qemu_riscv64_nommu_virt_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/qemu_riscv64_nommu_virt_defconfig b/configs/qemu_riscv64_nommu_virt_defconfig index 5fab255d88..ee70beb208 100644 --- a/configs/qemu_riscv64_nommu_virt_defconfig +++ b/configs/qemu_riscv64_nommu_virt_defconfig @@ -3,6 +3,9 @@ BR2_riscv=y BR2_RISCV_64=y # BR2_RISCV_USE_MMU is not set +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Busybox with hush BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config" From peter at korsgaard.com Thu Oct 6 17:53:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:55 +0200 Subject: [Buildroot] [git commit] nezha_defconfig: specify 5.19 kernel headers Message-ID: <20221006175949.3B2C986936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aafab85b07bb2361e826119b11cd021d409d01e0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfig uses a 5.19-rc1 based kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/nezha_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/nezha_defconfig b/configs/nezha_defconfig index 2e2df3c09d..5d0948a013 100644 --- a/configs/nezha_defconfig +++ b/configs/nezha_defconfig @@ -1,6 +1,6 @@ BR2_riscv=y BR2_GLOBAL_PATCH_DIR="board/nezha/patches" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_OVERLAY="board/nezha/overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" From peter at korsgaard.com Thu Oct 6 17:54:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:19 +0200 Subject: [Buildroot] [git commit] friendlyarm_nanopi_r2s_defconfig: specify kernel headers version Message-ID: <20221006175949.600078693A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2a012d68972e6762cb0ab8be531d66657fe102a9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs uses a 5.16 kernel, so specify 5.16 kernel headers to match. Signed-off-by: Peter Korsgaard --- configs/friendlyarm_nanopi_r2s_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig index ce252a5d76..284b28ec31 100644 --- a/configs/friendlyarm_nanopi_r2s_defconfig +++ b/configs/friendlyarm_nanopi_r2s_defconfig @@ -1,6 +1,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" From peter at korsgaard.com Thu Oct 6 17:58:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:58:54 +0200 Subject: [Buildroot] [git commit] package/acpica: fix legal-info Message-ID: <20221006175949.851F68680C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1a2baba96255f73c1c87e2d59cfbb13d3203ee5c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since the bump to version 20220331, the license file is changed as it was updated to the new release year. Fixes: http://autobuild.buildroot.net/results/93ad774a7f69e761952a3a6c92a24de7506e6312/ Signed-off-by: Erico Nunes Signed-off-by: Peter Korsgaard --- package/acpica/acpica.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash index 4b6981c602..564e393cb4 100644 --- a/package/acpica/acpica.hash +++ b/package/acpica/acpica.hash @@ -1,3 +1,3 @@ # locally computed hash sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz -sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h +sha256 40d8e351f8dfdf5340ec76ac28f0c201b825077d7060bb3686ca1112cb26985d source/include/acpi.h From peter at korsgaard.com Thu Oct 6 17:58:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:58:03 +0200 Subject: [Buildroot] [git commit] package/htpdate: bump to version 1.3.6 Message-ID: <20221006175949.7C5A786938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=30d6b73271de85ba50a7f59fb2cb6c0c0d9f0057 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Peter Korsgaard --- package/htpdate/htpdate.hash | 2 +- package/htpdate/htpdate.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/htpdate/htpdate.hash b/package/htpdate/htpdate.hash index d5426c6d08..f572fb1e84 100644 --- a/package/htpdate/htpdate.hash +++ b/package/htpdate/htpdate.hash @@ -1,3 +1,3 @@ # Locally calculated: -sha256 a8734d4f1d84d0608d045508608f2d29d8b968da269f83120aaac67709b1bd03 htpdate-1.3.5.tar.gz +sha256 3cdc558ec8e53ef374a42490b2f28c0b23981fa8754a6d7182044707828ad1e9 htpdate-1.3.6.tar.gz sha256 7989949df09a0489434723c571541604cd3f2e0418c6a6aa9179bfaf8ec807cc LICENSE diff --git a/package/htpdate/htpdate.mk b/package/htpdate/htpdate.mk index cf47ee5451..2d4a11dd9d 100644 --- a/package/htpdate/htpdate.mk +++ b/package/htpdate/htpdate.mk @@ -4,7 +4,7 @@ # ################################################################################ -HTPDATE_VERSION = 1.3.5 +HTPDATE_VERSION = 1.3.6 HTPDATE_SITE = $(call github,twekkel,htpdate,v$(HTPDATE_VERSION)) HTPDATE_LICENSE = GPL-2.0+ HTPDATE_LICENSE_FILES = LICENSE From peter at korsgaard.com Thu Oct 6 17:57:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:57:02 +0200 Subject: [Buildroot] [git commit] package/darkhttpd: security bump to version 1.14 Message-ID: <20221006175949.73B0D86937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cced5b68acba02abfd72f66264faed60f4bfd65a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From peter at korsgaard.com Thu Oct 6 17:53:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:49 +0200 Subject: [Buildroot] [git commit] package/linux-headers: drop 5.17.x option Message-ID: <20221006175949.331908693A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9647bf80a9375f508cdc0f32307e64071b9e0b74 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The 5.17.x series is now EOL upstream, so drop the linux-headers option and add legacy handling for it. Signed-off-by: Peter Korsgaard --- Config.in.legacy | 7 +++++++ package/linux-headers/Config.in.host | 5 ----- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 93d921160a..0e63d59a98 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,13 @@ endif comment "Legacy options removed in 2022.11" +config BR2_KERNEL_HEADERS_5_17 + bool "kernel headers version 5.17.x are no longer supported" + select BR2_LEGACY + help + Version 5.17.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + config BR2_iwmmxt bool "ARM iwmmxt variant removed" select BR2_LEGACY diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 4847cd4c87..7aee67de56 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -53,10 +53,6 @@ config BR2_KERNEL_HEADERS_5_15 bool "Linux 5.15.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 -config BR2_KERNEL_HEADERS_5_17 - bool "Linux 5.17.x kernel headers" - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 - config BR2_KERNEL_HEADERS_5_19 bool "Linux 5.19.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 @@ -402,7 +398,6 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.4.212" if BR2_KERNEL_HEADERS_5_4 default "5.10.142" if BR2_KERNEL_HEADERS_5_10 default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default "5.19.13" if BR2_KERNEL_HEADERS_5_19 default "6.0" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION From peter at korsgaard.com Thu Oct 6 17:54:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:06 +0200 Subject: [Buildroot] [git commit] configs/{canaan, sipeed_maix}*: specify kernel headers version Message-ID: <20221006175949.4FEE086938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1bd8e718a683a4af5db7f3aedb66717b45cdf2fc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs use a 5.19 kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard Reviewed-by: Damien Le Moal Signed-off-by: Peter Korsgaard --- configs/canaan_kd233_defconfig | 3 +++ configs/sipeed_maix_bit_defconfig | 3 +++ configs/sipeed_maix_bit_sdcard_defconfig | 3 +++ configs/sipeed_maix_dock_defconfig | 3 +++ configs/sipeed_maix_dock_sdcard_defconfig | 3 +++ configs/sipeed_maix_go_defconfig | 3 +++ configs/sipeed_maix_go_sdcard_defconfig | 3 +++ configs/sipeed_maixduino_defconfig | 3 +++ configs/sipeed_maixduino_sdcard_defconfig | 3 +++ 9 files changed, 27 insertions(+) diff --git a/configs/canaan_kd233_defconfig b/configs/canaan_kd233_defconfig index 3aa5dccf08..77b8abf531 100644 --- a/configs/canaan_kd233_defconfig +++ b/configs/canaan_kd233_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_bit_defconfig b/configs/sipeed_maix_bit_defconfig index d2bac9e0b8..d73ba0266a 100644 --- a/configs/sipeed_maix_bit_defconfig +++ b/configs/sipeed_maix_bit_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index e1c9dc417e..8a19996090 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_dock_defconfig b/configs/sipeed_maix_dock_defconfig index a7f0441e53..ccb563310e 100644 --- a/configs/sipeed_maix_dock_defconfig +++ b/configs/sipeed_maix_dock_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index 6b7f8d9c68..d3d0f405e1 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_go_defconfig b/configs/sipeed_maix_go_defconfig index a68f9d3b72..c3bcf98f81 100644 --- a/configs/sipeed_maix_go_defconfig +++ b/configs/sipeed_maix_go_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index a127872cd8..75300997b8 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maixduino_defconfig b/configs/sipeed_maixduino_defconfig index c52adb5db7..a30596af92 100644 --- a/configs/sipeed_maixduino_defconfig +++ b/configs/sipeed_maixduino_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index baaa2bc7bb..add9369747 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y From peter at korsgaard.com Thu Oct 6 18:00:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:00:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/meson: bump to version 0.63.3 In-Reply-To: <20221005232257.2625525-1-james.hilliard1@gmail.com> (James Hilliard's message of "Wed, 5 Oct 2022 17:22:57 -0600") References: <20221005232257.2625525-1-james.hilliard1@gmail.com> Message-ID: <87o7uosuhr.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 18:00:28 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:00:28 +0200 Subject: [Buildroot] [PATCH] package/python-markdown: bump version to 3.4.1 In-Reply-To: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> (Gwenhael Goavec-Merou's message of "Thu, 6 Oct 2022 09:33:51 +0200") References: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> Message-ID: <87k05csugz.fsf@dell.be.48ers.dk> >>>>> "Gwenhael" == Gwenhael Goavec-Merou writes: > From: Gwenhael Goavec-Merou > Signed-off-by: Gwenhael Goavec-Merou Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:59:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:59:57 +0200 Subject: [Buildroot] [git commit] package/meson: bump to version 0.63.3 Message-ID: <20221006180142.E21EA86948@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ee62626e161298854e5cbebb02e07a59abee379a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING From peter at korsgaard.com Thu Oct 6 18:00:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 20:00:18 +0200 Subject: [Buildroot] [git commit] package/python-markdown: bump version to 3.4.1 Message-ID: <20221006180142.EB3ED8694A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=daa5ff9658055a38ee5e224d312d8be17ff82606 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Peter Korsgaard --- package/python-markdown/python-markdown.hash | 4 ++-- package/python-markdown/python-markdown.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-markdown/python-markdown.hash b/package/python-markdown/python-markdown.hash index b64ac77be0..66208067cc 100644 --- a/package/python-markdown/python-markdown.hash +++ b/package/python-markdown/python-markdown.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/markdown/json -md5 b6833c6326e9164ee0c662218a75e7f0 Markdown-3.3.4.tar.gz -sha256 31b5b491868dcc87d6c24b7e3d19a0d730d59d3e46f4eea6430a321bed387a49 Markdown-3.3.4.tar.gz +md5 597656cf4feadf1998b0511201620202 Markdown-3.4.1.tar.gz +sha256 3b809086bb6efad416156e00a0da66fe47618a5d6918dd688f53f40c8e4cfeff Markdown-3.4.1.tar.gz # Locally computed sha256 sha256 6f1193cb634718e65c3a537d6e25ebd614820ec0ef693cfc12248112638d64da LICENSE.md diff --git a/package/python-markdown/python-markdown.mk b/package/python-markdown/python-markdown.mk index 801360d778..1b9b556201 100644 --- a/package/python-markdown/python-markdown.mk +++ b/package/python-markdown/python-markdown.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MARKDOWN_VERSION = 3.3.4 +PYTHON_MARKDOWN_VERSION = 3.4.1 PYTHON_MARKDOWN_SOURCE = Markdown-$(PYTHON_MARKDOWN_VERSION).tar.gz -PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/49/02/37bd82ae255bb4dfef97a4b32d95906187b7a7a74970761fca1360c4ba22 +PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/85/7e/133e943e97a943d2f1d8bae0c5060f8ac50e6691754eb9dbe036b047a9bb PYTHON_MARKDOWN_LICENSE = BSD-3-Clause PYTHON_MARKDOWN_LICENSE_FILES = LICENSE.md PYTHON_MARKDOWN_SETUP_TYPE = setuptools From peter at korsgaard.com Thu Oct 6 18:02:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:02:06 +0200 Subject: [Buildroot] [PATCH 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221004133057.2003750-2-aperez@igalia.com> (Adrian Perez de Castro's message of "Tue, 4 Oct 2022 16:30:53 +0300") References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-2-aperez@igalia.com> Message-ID: <87fsg0sue9.fsf@dell.be.48ers.dk> >>>>> "Adrian" == Adrian Perez de Castro writes: > Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. > Release notes: > https://wpewebkit.org/release/wpewebkit-2.36.8.html > Accompanying security advisory: > https://wpewebkit.org/security/WSA-2022-0009.html > This also imports a build fix for ARM NEON targets. > Signed-off-by: Adrian Perez de Castro Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 18:00:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 20:00:58 +0200 Subject: [Buildroot] [git commit] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221006180323.722C986955@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fc523deaf9e2e83a69ef54a2eee965e3b618a758 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Thu Oct 6 18:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:45:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6: bump to version 6.4.0 In-Reply-To: <20221004093649.31017-1-jesseevg@gmail.com> References: <20221004093649.31017-1-jesseevg@gmail.com> Message-ID: <20221006204525.68e10713@windsurf> On Tue, 4 Oct 2022 11:36:49 +0200 Jesse Van Gavere wrote: > Drop the qsimd_p.h fix, this has been fixed upstream since 6.3.2/6.4.0 > > Signed-off-by: Jesse Van Gavere > --- > package/qt6/qt6.mk | 4 +- > ...al-qsimd_p.h-fix-build-on-ARM-v7-due.patch | 49 ------------------- > package/qt6/qt6base/qt6base.hash | 4 +- > package/qt6/qt6serialport/qt6serialport.hash | 4 +- > 4 files changed, 6 insertions(+), 55 deletions(-) > delete mode 100644 package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:46:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:46:12 +0200 Subject: [Buildroot] [git commit] support/testing/tests/package/test_zfs: increase timeout for the ZFS tests Message-ID: <20221006184636.034EE869A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1b77c2170d052e0b66ea132365c4c6747ca1cf7a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Newest versions requires a bit more time to finish. Signed-off-by: Jos?? Luis Salvador Rufo Signed-off-by: Thomas Petazzoni --- support/testing/tests/package/test_zfs.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_zfs.py b/support/testing/tests/package/test_zfs.py index 688b60d7c4..1f01ddd768 100644 --- a/support/testing/tests/package/test_zfs.py +++ b/support/testing/tests/package/test_zfs.py @@ -4,6 +4,7 @@ import infra.basetest class TestZfsBase(infra.basetest.BRTest): + timeout = 60 * 3 config = \ """ BR2_x86_64=y @@ -57,7 +58,7 @@ class TestZfsBase(infra.basetest.BRTest): "arc_summary", ] for cmd in cmds: - self.assertRunOk(cmd) + self.assertRunOk(cmd, timeout=self.timeout) class TestZfsGlibc(TestZfsBase): From thomas.petazzoni at bootlin.com Thu Oct 6 18:43:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:43:25 +0200 Subject: [Buildroot] [git commit] package/zfs: bump version to 2.1.6 Message-ID: <20221006184635.EE7DD869A5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9a0a0843e419a2842c1377217d7e2ac9c47d416 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Jos?? Luis Salvador Rufo Signed-off-by: Thomas Petazzoni --- package/zfs/zfs.hash | 4 ++-- package/zfs/zfs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/zfs/zfs.hash b/package/zfs/zfs.hash index 411af974c6..b73fc3b703 100644 --- a/package/zfs/zfs.hash +++ b/package/zfs/zfs.hash @@ -1,5 +1,5 @@ -# From https://github.com/openzfs/zfs/releases/download/zfs-2.1.4/zfs-2.1.4.sha256.asc -sha256 3b52c0d493f806f638dca87dde809f53861cd318c1ebb0e60daeaa061cf1acf6 zfs-2.1.4.tar.gz +# From https://github.com/openzfs/zfs/releases/download/zfs-2.1.6/zfs-2.1.6.sha256.asc +sha256 15339014f8d2131348eb937bf8893849806b6d2645ea607a18c7f117749dbd7a zfs-2.1.6.tar.gz sha256 96a27353fe717ff2c8b95deb8b009c4eb750303c6400e2d8a2582ab1ec12b25a bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch # Hash for license files: diff --git a/package/zfs/zfs.mk b/package/zfs/zfs.mk index 900a72f997..f7e673c23f 100644 --- a/package/zfs/zfs.mk +++ b/package/zfs/zfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZFS_VERSION = 2.1.4 +ZFS_VERSION = 2.1.6 ZFS_SITE = https://github.com/openzfs/zfs/releases/download/zfs-$(ZFS_VERSION) ZFS_PATCH = https://github.com/openzfs/zfs/commit/bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch ZFS_LICENSE = CDDL From thomas.petazzoni at bootlin.com Thu Oct 6 18:42:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:42:50 +0200 Subject: [Buildroot] [git commit] package/qt6: bump to version 6.4.0 Message-ID: <20221006184635.E47D6869A3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=343974b99528702842e8c1dad945fcd4f0defd6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop the qsimd_p.h fix, this has been fixed upstream since 6.3.2/6.4.0 Signed-off-by: Jesse Van Gavere Signed-off-by: Thomas Petazzoni --- package/qt6/qt6.mk | 4 +- ...-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch | 49 ---------------------- package/qt6/qt6base/qt6base.hash | 4 +- package/qt6/qt6serialport/qt6serialport.hash | 4 +- 4 files changed, 6 insertions(+), 55 deletions(-) diff --git a/package/qt6/qt6.mk b/package/qt6/qt6.mk index b609baf4c6..575b2f826c 100644 --- a/package/qt6/qt6.mk +++ b/package/qt6/qt6.mk @@ -4,8 +4,8 @@ # ################################################################################ -QT6_VERSION_MAJOR = 6.3 -QT6_VERSION = $(QT6_VERSION_MAJOR).2 +QT6_VERSION_MAJOR = 6.4 +QT6_VERSION = $(QT6_VERSION_MAJOR).0 QT6_SOURCE_TARBALL_PREFIX = everywhere-src QT6_SITE = https://download.qt.io/archive/qt/$(QT6_VERSION_MAJOR)/$(QT6_VERSION)/submodules diff --git a/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch b/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch deleted file mode 100644 index 1097a79922..0000000000 --- a/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch +++ /dev/null @@ -1,49 +0,0 @@ -From d69db2ba3ce47f6eded0a8843c413a67d26e6375 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 24 Jul 2022 20:37:51 +0200 -Subject: [PATCH] src/corelib/global/qsimd_p.h: fix build on ARM < v7 due to - yield instruction - -On ARM < v7 with gcc, the build fails with: - -/tmp/ccRlrCQi.s: Assembler messages: -/tmp/ccRlrCQi.s:3858: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:3875: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:4606: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:4853: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:5268: Error: selected processor does not support `yield' in ARM mode - -while building src/corelib/thread/qfutureinterface.cpp. - -This is due to the fact that the qYieldCpu() macro on ARM, assumes -that if the compiler is gcc, we can do asm volatile("yield"). However, -this instruction is only guaranteed to exist on ARMv7+ cores. It -doesn't exist on ARMv5, and only some (but not all) ARMv6 cores have -it. If it's not available, we just fallback to the default behavior of -qYieldCpu(), which is to do nothing. - -Signed-off-by: Thomas Petazzoni -Upstream bug: https://bugreports.qt.io/browse/QTBUG-105162 ---- - src/corelib/global/qsimd_p.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/corelib/global/qsimd_p.h b/src/corelib/global/qsimd_p.h -index d270d09f2f..b84b257e54 100644 ---- a/src/corelib/global/qsimd_p.h -+++ b/src/corelib/global/qsimd_p.h -@@ -428,7 +428,10 @@ static inline void qYieldCpu() - https://stackoverflow.com/a/70076751/134841 - https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105416 - */ -- asm volatile("yield"); /* this works everywhere */ -+# if defined(Q_PROCESSOR_ARM_V7) -+ /* The yield instruction appeared in ARMv7 */ -+ asm volatile("yield"); -+# endif - # else - __yield(); /* this is what should work everywhere */ - # endif --- -2.37.1 - diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index e43a6ff52d..5dd26973fa 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -1,5 +1,5 @@ -# Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.2/submodules/qtbase-everywhere-src-6.3.2.tar.xz.sha256 -sha256 7929ba4df870b6b30870bc0aed2525cfc606ed7091107b23cf7ed7e434caa9a6 qtbase-everywhere-src-6.3.2.tar.xz +# Hash from: https://download.qt.io/official_releases/qt/6.4/6.4.0/submodules/qtbase-everywhere-src-6.4.0.tar.xz.sha256 +sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index 50202a1e26..fb1b3dcf6b 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -1,5 +1,5 @@ -# Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.1/submodules/qtserialport-everywhere-src-6.3.1.tar.xz.sha256 -sha256 c7d207322367c63647edbd06ded9c76ba9071961daac1d1021b622b762c35e6f qtserialport-everywhere-src-6.3.2.tar.xz +# Hash from: https://download.qt.io/official_releases/qt/6.4/6.4.0/submodules/qtserialport-everywhere-src-6.4.0.tar.xz.sha256 +sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 From thomas.petazzoni at bootlin.com Thu Oct 6 18:46:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:46:55 +0200 Subject: [Buildroot] [PATCH 1/2] package/zfs: bump version to 2.1.6 In-Reply-To: <20221004011034.1283650-1-salvador.joseluis@gmail.com> References: <20221004011034.1283650-1-salvador.joseluis@gmail.com> Message-ID: <20221006204655.32feb76e@windsurf> On Tue, 4 Oct 2022 03:10:34 +0200 Jos? Luis Salvador Rufo wrote: > Signed-off-by: Jos? Luis Salvador Rufo > --- > package/zfs/zfs.hash | 2 +- > package/zfs/zfs.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Both applied to master, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:47:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:47:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnuplot: bump version to 5.4.5 In-Reply-To: <20221004073233.1665-1-mf@go-sys.de> References: <20221004073233.1665-1-mf@go-sys.de> Message-ID: <20221006204729.54665188@windsurf> On Tue, 4 Oct 2022 09:32:33 +0200 Michael Fischer wrote: > Signed-off-by: Michael Fischer > --- > package/gnuplot/gnuplot.hash | 8 ++++---- > package/gnuplot/gnuplot.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From bugzilla at busybox.net Thu Oct 6 18:48:09 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 06 Oct 2022 18:48:09 +0000 Subject: [Buildroot] [Bug 15026] package/udisks: install to staging In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15026 --- Comment #2 from Thomas Petazzoni --- If you post the patch to the mailing list, could you be a bit more specific in the commit log as to why installation to staging is useful for this package? Normally, installation to staging is relevant when the package installs a library. Thanks a lot! -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:26 +0200 Subject: [Buildroot] [PATCH] package/sysdig: bump to version 0.29.3 In-Reply-To: <20221003203104.3384703-1-angelo@amarulasolutions.com> References: <20221003203104.3384703-1-angelo@amarulasolutions.com> Message-ID: <20221006210426.1fc44cf9@windsurf> On Mon, 3 Oct 2022 22:31:04 +0200 Angelo Compagnucci wrote: > Signed-off-by: Angelo Compagnucci > --- > package/sysdig/sysdig.hash | 2 +- > package/sysdig/sysdig.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:33 +0200 Subject: [Buildroot] [PATCH] package/python-pydal: bump to version 20220814.1 In-Reply-To: <20221003151207.3250577-1-angelo@amarulasolutions.com> References: <20221003151207.3250577-1-angelo@amarulasolutions.com> Message-ID: <20221006210433.51ec7a62@windsurf> On Mon, 3 Oct 2022 17:12:07 +0200 Angelo Compagnucci wrote: > Signed-off-by: Angelo Compagnucci > --- > package/python-pydal/python-pydal.hash | 2 +- > package/python-pydal/python-pydal.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:40 +0200 Subject: [Buildroot] [PATCH] package/grep: bump to version 3.8 In-Reply-To: <20221003150609.3235085-1-angelo@amarulasolutions.com> References: <20221003150609.3235085-1-angelo@amarulasolutions.com> Message-ID: <20221006210440.1d3158a0@windsurf> On Mon, 3 Oct 2022 17:06:09 +0200 Angelo Compagnucci wrote: > * Updated to the new PCRE2 dependency > * Removed unneeded patches (file m4/stack-direction.m4 is not there) > * Removed autoreconf step because unnecessary after not patching m4 > anymore > > Signed-off-by: Angelo Compagnucci > --- > ...01-sigsegv-fix-build-on-microblazeel.patch | 32 ------------------- > .../grep/0002-sigsegv-fix-build-on-or1k.patch | 32 ------------------- > package/grep/grep.hash | 4 +-- > package/grep/grep.mk | 8 ++--- > 4 files changed, 5 insertions(+), 71 deletions(-) > delete mode 100644 package/grep/0001-sigsegv-fix-build-on-microblazeel.patch > delete mode 100644 package/grep/0002-sigsegv-fix-build-on-or1k.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:20 +0200 Subject: [Buildroot] [git commit] package/sysdig: bump to version 0.29.3 Message-ID: <20221006190452.33D48869ED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08792a60df80a1147ee78bb108f8186996bf0c77 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/sysdig/sysdig.hash | 2 +- package/sysdig/sysdig.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sysdig/sysdig.hash b/package/sysdig/sysdig.hash index c953421f27..cda3de5e7c 100644 --- a/package/sysdig/sysdig.hash +++ b/package/sysdig/sysdig.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 38ea602085f706af5d07630189216fa240064122650a81456cb092579313ae8e sysdig-0.29.2.tar.gz +sha256 6b96797859002ab69a2bed4fdba1c7fe8064ecf8661621ae7d8fbf8599ffa636 sysdig-0.29.3.tar.gz sha256 a88fbf820b38b1c7fabc6efe291b8259e02ae21326f56fe31c6c9adf374b2702 COPYING diff --git a/package/sysdig/sysdig.mk b/package/sysdig/sysdig.mk index e9968d9fde..bafe534a16 100644 --- a/package/sysdig/sysdig.mk +++ b/package/sysdig/sysdig.mk @@ -4,7 +4,7 @@ # ################################################################################ -SYSDIG_VERSION = 0.29.2 +SYSDIG_VERSION = 0.29.3 SYSDIG_SITE = $(call github,draios,sysdig,$(SYSDIG_VERSION)) SYSDIG_LICENSE = Apache-2.0 SYSDIG_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:25 +0200 Subject: [Buildroot] [git commit] package/python-pydal: bump to version 20220814.1 Message-ID: <20221006190452.3CC99869EF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d33c87b87372fc162c69be4fb96c4038dbc31c52 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/python-pydal/python-pydal.hash | 2 +- package/python-pydal/python-pydal.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/python-pydal/python-pydal.hash b/package/python-pydal/python-pydal.hash index 9366708a7d..2a712e26c9 100644 --- a/package/python-pydal/python-pydal.hash +++ b/package/python-pydal/python-pydal.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 7891bd35d57b850efdbbe1f2d46cb1daf8c991c912a99e211ab87a30e7685781 python-pydal-20220609.1.tar.gz +sha256 e4bde1955c2d15cae07349275cda48fa61a46dd51562717c2f0f1374dd459547 python-pydal-20220814.1.tar.gz sha256 1f711e93f1e0c2eec576e2e60597dc2ed6f0a661e4749c6b8a39f0d4a72be468 LICENSE.txt diff --git a/package/python-pydal/python-pydal.mk b/package/python-pydal/python-pydal.mk index 2990051351..89c3f14726 100644 --- a/package/python-pydal/python-pydal.mk +++ b/package/python-pydal/python-pydal.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_PYDAL_VERSION = 20220609.1 +PYTHON_PYDAL_VERSION = 20220814.1 PYTHON_PYDAL_SITE = $(call github,web2py,pydal,v$(PYTHON_PYDAL_VERSION)) PYTHON_PYDAL_LICENSE = BSD-3-Clause PYTHON_PYDAL_LICENSE_FILES = LICENSE.txt From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:51 +0200 Subject: [Buildroot] [git commit] package/grep: bump to version 3.8 Message-ID: <20221006190452.45FB18699F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d1ed333dfe9c859645a44a5d9c909a8692bb8015 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master * Updated to the new PCRE2 dependency * Removed unneeded patches (file m4/stack-direction.m4 is not there) * Removed autoreconf step because unnecessary after not patching m4 anymore Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- .../0001-sigsegv-fix-build-on-microblazeel.patch | 32 ---------------------- package/grep/0002-sigsegv-fix-build-on-or1k.patch | 32 ---------------------- package/grep/grep.hash | 4 +-- package/grep/grep.mk | 8 ++---- 4 files changed, 5 insertions(+), 71 deletions(-) diff --git a/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch b/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch deleted file mode 100644 index 06869b716e..0000000000 --- a/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 3079cea1b18fe72aa1da6b04e561abfb36f4f443 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 11 Nov 2021 09:57:23 +0100 -Subject: sigsegv: fix build on microblazeel - -Fix the following build failure on microblazeel with diffutils 3.8: -sigsegv.c:979:28: error: 'struct vma_struct' has no member named 'is_near_this' -http://autobuild.buildroot.org/results/5ecd55b7c72f9630a7acc72341ccb60e94ddb574 - -[Retrieved from: -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=3079cea1b18fe72aa1da6b04e561abfb36f4f443] -Signed-off-by: Fabrice Fontaine ---- - m4/stack-direction.m4 | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/m4/stack-direction.m4 b/m4/stack-direction.m4 -index c90d69733..70286c8f5 100644 ---- a/m4/stack-direction.m4 -+++ b/m4/stack-direction.m4 -@@ -37,7 +37,7 @@ AC_DEFUN([SV_STACK_DIRECTION], - m68* | \ - m88k | \ - mcore | \ -- microblaze | \ -+ microblaze* | \ - mips* | \ - mmix | \ - mn10200 | \ --- -cgit v1.2.1 - diff --git a/package/grep/0002-sigsegv-fix-build-on-or1k.patch b/package/grep/0002-sigsegv-fix-build-on-or1k.patch deleted file mode 100644 index 73385fe9f7..0000000000 --- a/package/grep/0002-sigsegv-fix-build-on-or1k.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 496c1740e5475be85b65fdb2b143771f09ed27cb Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 11 Nov 2021 10:06:31 +0100 -Subject: sigsegv: fix build on or1k - -Fix the following build failure on or1k with diffutils 3.8 -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=e54aa6196947ed22ff66bcd714e4fc7bd0c5c3b4 -sigsegv.c:979:28: error: 'struct vma_struct' has no member named 'is_near_this' -http://autobuild.buildroot.org/results/5427e52489d29ed4f18b4a70b3c36f0f7bb0ddd9 - -[Retrieved from: -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=496c1740e5475be85b65fdb2b143771f09ed27cb] -Signed-off-by: Fabrice Fontaine ---- - m4/stack-direction.m4 | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/m4/stack-direction.m4 b/m4/stack-direction.m4 -index 70286c8f5..29e398d77 100644 ---- a/m4/stack-direction.m4 -+++ b/m4/stack-direction.m4 -@@ -45,6 +45,7 @@ AC_DEFUN([SV_STACK_DIRECTION], - nios2 | \ - nds32* | \ - ns32k | \ -+ or1k | \ - pdp11 | \ - pj* | \ - powerpc* | rs6000 | \ --- -cgit v1.2.1 - diff --git a/package/grep/grep.hash b/package/grep/grep.hash index 29d9eb1cd6..6f3bca89ad 100644 --- a/package/grep/grep.hash +++ b/package/grep/grep.hash @@ -1,5 +1,5 @@ # Locally calculated after checking signature -# http://ftp.gnu.org/gnu/grep/grep-3.7.tar.xz.sig +# http://ftp.gnu.org/gnu/grep/grep-3.8.tar.xz.sig # using key 155D3FC500C834486D1EEA677FD9FCCB000BEEEE -sha256 5c10da312460aec721984d5d83246d24520ec438dd48d7ab5a05dbc0d6d6823c grep-3.7.tar.xz +sha256 498d7cc1b4fb081904d87343febb73475cf771e424fb7e6141aff66013abc382 grep-3.8.tar.xz sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/grep/grep.mk b/package/grep/grep.mk index a485f23dc7..318e00940d 100644 --- a/package/grep/grep.mk +++ b/package/grep/grep.mk @@ -4,14 +4,12 @@ # ################################################################################ -GREP_VERSION = 3.7 +GREP_VERSION = 3.8 GREP_SITE = $(BR2_GNU_MIRROR)/grep GREP_SOURCE = grep-$(GREP_VERSION).tar.xz GREP_LICENSE = GPL-3.0+ GREP_LICENSE_FILES = COPYING GREP_CPE_ID_VENDOR = gnu -# We're patching m4/stack-direction.m4 -GREP_AUTORECONF = YES GREP_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES) # install into /bin like busybox grep GREP_CONF_OPTS = --exec-prefix=/ @@ -40,9 +38,9 @@ GREP_DEPENDENCIES += libiconv endif # link with pcre if enabled -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) GREP_CONF_OPTS += --enable-perl-regexp -GREP_DEPENDENCIES += pcre +GREP_DEPENDENCIES += pcre2 else GREP_CONF_OPTS += --disable-perl-regexp endif From thomas.petazzoni at bootlin.com Thu Oct 6 18:47:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:47:01 +0200 Subject: [Buildroot] [git commit] package/gnuplot: bump version to 5.4.5 Message-ID: <20221006190452.2B1CE869EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=164bf2158ed97f09d932ae847ca3c7c25cf0f6d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Fischer Signed-off-by: Thomas Petazzoni --- package/gnuplot/gnuplot.hash | 8 ++++---- package/gnuplot/gnuplot.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/gnuplot/gnuplot.hash b/package/gnuplot/gnuplot.hash index 3b6412091a..1ee6b53694 100644 --- a/package/gnuplot/gnuplot.hash +++ b/package/gnuplot/gnuplot.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/gnuplot/files/gnuplot/5.4.4/ -md5 209c6da8693fa15ae1527c832075ef0f gnuplot-5.4.4.tar.gz -sha1 3305bb255d379eaf0b5181a01cb71119cf89c110 gnuplot-5.4.4.tar.gz +# From https://sourceforge.net/projects/gnuplot/files/gnuplot/5.4.5/ +md5 c10cf81faa69d77e255a1dcfc625ba78 gnuplot-5.4.5.tar.gz +sha1 1179a768fd5f585a5dcb6aedea76cfa7a8dd5dfe gnuplot-5.4.5.tar.gz # Locally computed -sha256 372300b7867f5b3538b25fc5d0ac7734af6e3fe0d202b6db926e4369913f0902 gnuplot-5.4.4.tar.gz +sha256 66f679115dd30559e110498fc94d926949d4d370b4999a042e724b8e910ee478 gnuplot-5.4.5.tar.gz sha256 895928ec0735cca1c8cec42656c7e314a065d0242813bb8693c0c1bf61fd4e4d Copyright diff --git a/package/gnuplot/gnuplot.mk b/package/gnuplot/gnuplot.mk index 18c13d5371..1ee49cb6ce 100644 --- a/package/gnuplot/gnuplot.mk +++ b/package/gnuplot/gnuplot.mk @@ -4,7 +4,7 @@ # ################################################################################ -GNUPLOT_VERSION = 5.4.4 +GNUPLOT_VERSION = 5.4.5 GNUPLOT_SITE = http://downloads.sourceforge.net/project/gnuplot/gnuplot/$(GNUPLOT_VERSION) GNUPLOT_LICENSE = gnuplot license (open source) GNUPLOT_LICENSE_FILES = Copyright From thomas.petazzoni at bootlin.com Thu Oct 6 19:36:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:36:56 +0200 Subject: [Buildroot] [PATCH] package/fail2ban: bump to version 1.0.1 In-Reply-To: <20221003144455.3173974-1-angelo@amarulasolutions.com> References: <20221003144455.3173974-1-angelo@amarulasolutions.com> Message-ID: <20221006213656.105db88e@windsurf> On Mon, 3 Oct 2022 16:44:55 +0200 Angelo Compagnucci wrote: > Removing also upstreamed patches. > > Signed-off-by: Angelo Compagnucci > --- > ...-vulnerability-unset-escape-variable.patch | 158 ------------------ > ...with-error-in-fail2ban-setup-command.patch | 67 -------- > package/fail2ban/fail2ban.hash | 2 +- > package/fail2ban/fail2ban.mk | 2 +- > 4 files changed, 2 insertions(+), 227 deletions(-) > delete mode 100644 package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch > delete mode 100644 package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:16 +0200 Subject: [Buildroot] [PATCH] package/cups-filters: bump to version 1.28.16 In-Reply-To: <20221003130331.3074242-1-angelo@amarulasolutions.com> References: <20221003130331.3074242-1-angelo@amarulasolutions.com> Message-ID: <20221006213716.2748d834@windsurf> On Mon, 3 Oct 2022 15:03:31 +0200 Angelo Compagnucci wrote: > Handling the newly added libexif configure option. > > Signed-off-by: Angelo Compagnucci > --- > package/cups-filters/cups-filters.hash | 2 +- > package/cups-filters/cups-filters.mk | 10 +++++++++- > 2 files changed, 10 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:34 +0200 Subject: [Buildroot] [git commit] package/liburiparser: bump to version 0.9.7 Message-ID: <20221006194115.9617F86A2B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4002e402d305176f443d3076f8802c7791992efb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/liburiparser/liburiparser.hash | 2 +- package/liburiparser/liburiparser.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/liburiparser/liburiparser.hash b/package/liburiparser/liburiparser.hash index 8b40807541..73b4ec6867 100644 --- a/package/liburiparser/liburiparser.hash +++ b/package/liburiparser/liburiparser.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a288a06668528c19e85e38c508335938e1de6fdd4b8f2072401b4533fcebf644 uriparser-0.9.6.tar.xz +sha256 1ddae35cb3cc2c36e8199829d46f1c7f8b222e74a723fdae67ec8561e1ac5a39 uriparser-0.9.7.tar.xz sha256 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3 COPYING diff --git a/package/liburiparser/liburiparser.mk b/package/liburiparser/liburiparser.mk index c9903bd74f..6d25b1d9bb 100644 --- a/package/liburiparser/liburiparser.mk +++ b/package/liburiparser/liburiparser.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBURIPARSER_VERSION = 0.9.6 +LIBURIPARSER_VERSION = 0.9.7 LIBURIPARSER_SOURCE = uriparser-$(LIBURIPARSER_VERSION).tar.xz LIBURIPARSER_SITE = https://github.com/uriparser/uriparser/releases/download/uriparser-$(LIBURIPARSER_VERSION) LIBURIPARSER_LICENSE = BSD-3-Clause From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:54 +0200 Subject: [Buildroot] [git commit] package/mender: bump version to 3.4.0 Message-ID: <20221006194115.9F7A786A2D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c6c8531a79908e79b78718bd1e0f683a33babafe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a year change. Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- package/mender/mender.hash | 6 +++--- package/mender/mender.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/mender/mender.hash b/package/mender/mender.hash index 7fee01cf1a..d563dc534b 100644 --- a/package/mender/mender.hash +++ b/package/mender/mender.hash @@ -1,12 +1,12 @@ # Locally computed: -sha256 9d8b2438e358dacde58c3692bd038ed9938392f1a526c49d919f73a2dff77eee mender-3.3.0.tar.gz +sha256 8a149b11b990beb7620b372023eec28df63cee6a1aa4132e88ecef554f080f72 mender-3.4.0.tar.gz # Vendor licenses # Generated with sed '/^[A-Za-z0-9_]/s/^/sha256 /' LIC_FILES_CHKSUM.sha256 # Apache-2.0 license. sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a vendor/github.com/mendersoftware/mender-artifact/LICENSE +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b vendor/github.com/mendersoftware/mender-artifact/LICENSE sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/github.com/minio/sha256-simd/LICENSE sha256 8f5d89b47d7a05a199b77b7e0f362dad391d451ebda4ef48ba11c50c071564c7 vendor/github.com/mendersoftware/progressbar/LICENSE @@ -42,4 +42,4 @@ sha256 08eab1118c80885fa1fa6a6dd7303f65a379fcb3733e063d20d1bbc2c76e6fa1 vendor sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 vendor/github.com/bmatsuo/lmdb-go/LICENSE.mdb.md # sha256 of all the vendor licenses combined -sha256 e6d8321e71be932e08b8923fe9e24e06a95c7e74a6b86e6f73696436ae0ea54f LIC_FILES_CHKSUM.sha256 +sha256 93d9db9b43097b174e362ac8f398aa9a37fcdde2974d0567b62bd6d1e0d22037 LIC_FILES_CHKSUM.sha256 diff --git a/package/mender/mender.mk b/package/mender/mender.mk index 5c3c593da6..724295f784 100644 --- a/package/mender/mender.mk +++ b/package/mender/mender.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_VERSION = 3.3.0 +MENDER_VERSION = 3.4.0 MENDER_SITE = $(call github,mendersoftware,mender,$(MENDER_VERSION)) MENDER_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, OLDAP-2.8 From thomas.petazzoni at bootlin.com Thu Oct 6 19:05:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:05:30 +0200 Subject: [Buildroot] [git commit] package/cups-filters: bump to version 1.28.16 Message-ID: <20221006194115.8D49586A29@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c90810abea1421c1a1bc8db362662a1e7174767c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Handling the newly added libexif configure option. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/cups-filters/cups-filters.hash | 2 +- package/cups-filters/cups-filters.mk | 10 +++++++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/package/cups-filters/cups-filters.hash b/package/cups-filters/cups-filters.hash index d05cce3734..b910cdce13 100644 --- a/package/cups-filters/cups-filters.hash +++ b/package/cups-filters/cups-filters.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 614e053404bb833f78e1edf077f7759d27e475a212eb9a3bd3eac2cfec8bb6c1 cups-filters-1.28.15.tar.gz +sha256 0ca77bb820719a040ff003ecb478d0c2ceffc94e8bd1cd03ddb5a199444127ba cups-filters-1.28.16.tar.gz sha256 38192ffdaca98b718f78b2d4abc38bb087f0bbcc9a16d212c98b903b985f900f COPYING diff --git a/package/cups-filters/cups-filters.mk b/package/cups-filters/cups-filters.mk index 976549e65e..7a3c894112 100644 --- a/package/cups-filters/cups-filters.mk +++ b/package/cups-filters/cups-filters.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_FILTERS_VERSION = 1.28.15 +CUPS_FILTERS_VERSION = 1.28.16 CUPS_FILTERS_SITE = http://openprinting.org/download/cups-filters CUPS_FILTERS_LICENSE = GPL-2.0, GPL-2.0+, GPL-3.0, GPL-3.0+, LGPL-2, LGPL-2.1+, MIT, BSD-4-Clause CUPS_FILTERS_LICENSE_FILES = COPYING @@ -73,6 +73,14 @@ else CUPS_FILTERS_CONF_OPTS += --disable-poppler endif +ifeq ($(BR2_PACKAGE_LIBEXIF),y) +CUPS_FILTERS_CONF_OPTS += --enable-exif +CUPS_FILTERS_DEPENDENCIES += libexif +else +CUPS_FILTERS_CONF_OPTS += --disable-exif +endif + + define CUPS_FILTERS_INSTALL_INIT_SYSV $(INSTALL) -D -m 0755 package/cups-filters/S82cups-browsed \ $(TARGET_DIR)/etc/init.d/S82cups-browsed From thomas.petazzoni at bootlin.com Thu Oct 6 19:38:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:38:04 +0200 Subject: [Buildroot] [git commit] package/mender-connect: bump version to 2.1.0 Message-ID: <20221006194115.ADED4869EA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b31acdccef583a3da1d538abc347a5c8467c2598 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- package/mender-connect/mender-connect.hash | 2 +- package/mender-connect/mender-connect.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mender-connect/mender-connect.hash b/package/mender-connect/mender-connect.hash index 46f37f954b..da4ec5fbbd 100644 --- a/package/mender-connect/mender-connect.hash +++ b/package/mender-connect/mender-connect.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 6410bcd76cebd21e9f18fe5768928d67163e4bb2b6ae76d0e20815400d907657 mender-connect-2.0.2.tar.gz +sha256 96b81bb4c72eb8c1756febb94101c0dea5a6d4884591824e61a5f2509cd9ca9b mender-connect-2.1.0.tar.gz sha256 78b3954421ec6499c3f9735b96d52288574ae80c747416a52548d7f526f26e8c LIC_FILES_CHKSUM.sha256 # Vendor licenses diff --git a/package/mender-connect/mender-connect.mk b/package/mender-connect/mender-connect.mk index 1b0285cffc..36ddd5f7db 100644 --- a/package/mender-connect/mender-connect.mk +++ b/package/mender-connect/mender-connect.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_CONNECT_VERSION = 2.0.2 +MENDER_CONNECT_VERSION = 2.1.0 MENDER_CONNECT_SITE = $(call github,mendersoftware,mender-connect,$(MENDER_CONNECT_VERSION)) MENDER_CONNECT_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT From thomas.petazzoni at bootlin.com Thu Oct 6 19:05:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:05:10 +0200 Subject: [Buildroot] [git commit] package/fail2ban: bump to version 1.0.1 Message-ID: <20221006194115.84A5A86A22@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=76853089d561c6d2517bfe87d81f7f1ff4b4b7c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Removing also upstreamed patches. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- ...e-RCE-vulnerability-unset-escape-variable.patch | 158 --------------------- ...ails-with-error-in-fail2ban-setup-command.patch | 67 --------- package/fail2ban/fail2ban.hash | 2 +- package/fail2ban/fail2ban.mk | 2 +- 4 files changed, 2 insertions(+), 227 deletions(-) diff --git a/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch b/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch deleted file mode 100644 index 6d44f41d85..0000000000 --- a/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch +++ /dev/null @@ -1,158 +0,0 @@ -From 410a6ce5c80dd981c22752da034f2529b5eee844 Mon Sep 17 00:00:00 2001 -From: sebres -Date: Mon, 21 Jun 2021 17:12:53 +0200 -Subject: [PATCH] fixed possible RCE vulnerability, unset escape variable - (default tilde) stops consider "~" char after new-line as composing escape - sequence - -[Retrieved from: -https://github.com/fail2ban/fail2ban/commit/410a6ce5c80dd981c22752da034f2529b5eee844] -Signed-off-by: Fabrice Fontaine ---- - config/action.d/complain.conf | 2 +- - config/action.d/dshield.conf | 2 +- - config/action.d/mail-buffered.conf | 8 ++++---- - config/action.d/mail-whois-lines.conf | 2 +- - config/action.d/mail-whois.conf | 6 +++--- - config/action.d/mail.conf | 6 +++--- - 6 files changed, 13 insertions(+), 13 deletions(-) - -diff --git a/config/action.d/complain.conf b/config/action.d/complain.conf -index 3a5f882c9f..4d73b05859 100644 ---- a/config/action.d/complain.conf -+++ b/config/action.d/complain.conf -@@ -102,7 +102,7 @@ logpath = /dev/null - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Option: mailargs - # Notes.: Additional arguments to mail command. e.g. for standard Unix mail: -diff --git a/config/action.d/dshield.conf b/config/action.d/dshield.conf -index c128bef348..3d5a7a53a9 100644 ---- a/config/action.d/dshield.conf -+++ b/config/action.d/dshield.conf -@@ -179,7 +179,7 @@ tcpflags = - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Option: mailargs - # Notes.: Additional arguments to mail command. e.g. for standard Unix mail: -diff --git a/config/action.d/mail-buffered.conf b/config/action.d/mail-buffered.conf -index 325f185b2f..79b841049c 100644 ---- a/config/action.d/mail-buffered.conf -+++ b/config/action.d/mail-buffered.conf -@@ -17,7 +17,7 @@ actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Output will be buffered until lines are available.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -28,13 +28,13 @@ actionstop = if [ -f ]; then - These hosts have been banned by Fail2Ban.\n - `cat ` - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : Summary from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : Summary from " - rm - fi - printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -55,7 +55,7 @@ actionban = printf %%b "`date`: ( failures)\n" >> - These hosts have been banned by Fail2Ban.\n - `cat ` - \nRegards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : Summary" -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : Summary" - rm - fi - -diff --git a/config/action.d/mail-whois-lines.conf b/config/action.d/mail-whois-lines.conf -index 3a3e56b2c7..d2818cb9b9 100644 ---- a/config/action.d/mail-whois-lines.conf -+++ b/config/action.d/mail-whois-lines.conf -@@ -72,7 +72,7 @@ actionunban = - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Default name of the chain - # -diff --git a/config/action.d/mail-whois.conf b/config/action.d/mail-whois.conf -index 7fea34c40d..ab33b616dc 100644 ---- a/config/action.d/mail-whois.conf -+++ b/config/action.d/mail-whois.conf -@@ -20,7 +20,7 @@ norestored = 1 - actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -29,7 +29,7 @@ actionstart = printf %%b "Hi,\n - actionstop = printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -49,7 +49,7 @@ actionban = printf %%b "Hi,\n - Here is more information about :\n - `%(_whois_command)s`\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : banned from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : banned from " - - # Option: actionunban - # Notes.: command executed when unbanning an IP. Take care that the -diff --git a/config/action.d/mail.conf b/config/action.d/mail.conf -index 5d8c0e154c..f4838ddcb6 100644 ---- a/config/action.d/mail.conf -+++ b/config/action.d/mail.conf -@@ -16,7 +16,7 @@ norestored = 1 - actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -25,7 +25,7 @@ actionstart = printf %%b "Hi,\n - actionstop = printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -43,7 +43,7 @@ actionban = printf %%b "Hi,\n - The IP has just been banned by Fail2Ban after - attempts against .\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : banned from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : banned from " - - # Option: actionunban - # Notes.: command executed when unbanning an IP. Take care that the diff --git a/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch b/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch deleted file mode 100644 index 8cb097dc38..0000000000 --- a/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 5ac303df8a171f748330d4c645ccbf1c2c7f3497 Mon Sep 17 00:00:00 2001 -From: sebres -Date: Sun, 19 Sep 2021 18:49:18 +0200 -Subject: [PATCH] fix gh-3098: build fails with error in fail2ban setup - command: use_2to3 is invalid (setuptools 58+) - -[Retrieved from: -https://github.com/fail2ban/fail2ban/commit/5ac303df8a171f748330d4c645ccbf1c2c7f3497] -Signed-off-by: Fabrice Fontaine ---- - setup.py | 16 +--------------- - 1 file changed, 1 insertion(+), 15 deletions(-) - -diff --git a/setup.py b/setup.py -index f4c2550f6..98413273c 100755 ---- a/setup.py -+++ b/setup.py -@@ -48,7 +48,7 @@ - from glob import glob - - from fail2ban.setup import updatePyExec -- -+from fail2ban.version import version - - source_dir = os.path.realpath(os.path.dirname( - # __file__ seems to be overwritten sometimes on some python versions (e.g. bug of 2.6 by running under cProfile, etc.): -@@ -112,22 +112,12 @@ def update_scripts(self, dry_run=False): - # Wrapper to specify fail2ban own options: - class install_command_f2b(install): - user_options = install.user_options + [ -- ('disable-2to3', None, 'Specify to deactivate 2to3, e.g. if the install runs from fail2ban test-cases.'), - ('without-tests', None, 'without tests files installation'), - ] - def initialize_options(self): -- self.disable_2to3 = None - self.without_tests = not with_tests - install.initialize_options(self) - def finalize_options(self): -- global _2to3 -- ## in the test cases 2to3 should be already done (fail2ban-2to3): -- if self.disable_2to3: -- _2to3 = False -- if _2to3: -- cmdclass = self.distribution.cmdclass -- cmdclass['build_py'] = build_py_2to3 -- cmdclass['build_scripts'] = build_scripts_2to3 - if self.without_tests: - self.distribution.scripts.remove('bin/fail2ban-testcases') - -@@ -178,7 +168,6 @@ def run(self): - if setuptools: - setup_extra = { - 'test_suite': "fail2ban.tests.utils.gatherTests", -- 'use_2to3': True, - } - else: - setup_extra = {} -@@ -202,9 +191,6 @@ def run(self): - ('/usr/share/doc/fail2ban', doc_files) - ) - --# Get version number, avoiding importing fail2ban. --# This is due to tests not functioning for python3 as 2to3 takes place later --exec(open(join("fail2ban", "version.py")).read()) - - setup( - name = "fail2ban", diff --git a/package/fail2ban/fail2ban.hash b/package/fail2ban/fail2ban.hash index 072f0ef961..4073efe4c7 100644 --- a/package/fail2ban/fail2ban.hash +++ b/package/fail2ban/fail2ban.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 383108e5f8644cefb288537950923b7520f642e7e114efb843f6e7ea9268b1e0 fail2ban-0.11.2.tar.gz +sha256 62b54679ebae81ac57f32c5e27aba9f2494ec5bafd45a0fd68e7a27fd448e5ac fail2ban-1.0.1.tar.gz sha256 a75fec0260742fe6275d63ff6a5d97b924b28766558306b3fa4069763096929b COPYING diff --git a/package/fail2ban/fail2ban.mk b/package/fail2ban/fail2ban.mk index 4a08981a97..288266c2c7 100644 --- a/package/fail2ban/fail2ban.mk +++ b/package/fail2ban/fail2ban.mk @@ -4,7 +4,7 @@ # ################################################################################ -FAIL2BAN_VERSION = 0.11.2 +FAIL2BAN_VERSION = 1.0.1 FAIL2BAN_SITE = $(call github,fail2ban,fail2ban,$(FAIL2BAN_VERSION)) FAIL2BAN_LICENSE = GPL-2.0+ FAIL2BAN_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:14 +0200 Subject: [Buildroot] [PATCH 1/4] package/mender: bump version to 3.4.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221006214114.003cd90f@windsurf> On Wed, 5 Oct 2022 14:21:47 -0700 Adam Duskett wrote: > Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a > year change. > > Signed-off-by: Adam Duskett > --- > package/mender/mender.hash | 6 +++--- > package/mender/mender.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:17 +0200 Subject: [Buildroot] [PATCH 2/4] package/mender-connect: bump version to 2.1.0 In-Reply-To: <20221005212150.1384370-2-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-2-aduskett@gmail.com> Message-ID: <20221006214117.1f218112@windsurf> On Wed, 5 Oct 2022 14:21:48 -0700 Adam Duskett wrote: > Signed-off-by: Adam Duskett > --- > package/mender-connect/mender-connect.hash | 2 +- > package/mender-connect/mender-connect.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/liburiparser: bump to version 0.9.7 In-Reply-To: <20221005200621.229757-1-fontaine.fabrice@gmail.com> References: <20221005200621.229757-1-fontaine.fabrice@gmail.com> Message-ID: <20221006214123.6901795e@windsurf> On Wed, 5 Oct 2022 22:06:21 +0200 Fabrice Fontaine wrote: > https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/liburiparser/liburiparser.hash | 2 +- > package/liburiparser/liburiparser.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:42:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:42:57 +0200 Subject: [Buildroot] [PATCH 3/4] package/mender-artifact: bump version to 3.9.0 In-Reply-To: <20221005212150.1384370-3-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-3-aduskett@gmail.com> Message-ID: <20221006214257.47c453f5@windsurf> On Wed, 5 Oct 2022 14:21:49 -0700 Adam Duskett wrote: > mender-artifact now requires OpenSSL, and is incompatible with OpenSSL3. > As such, the host-pkgconf and host-libopenssl packages are now dependencies to > prevent linking errors against OpenSSL3 on newer distributions such as > Fedora 35. Even if mender-artifact was compatible with OpenSSL3, it would be a bug to rely on the system-provided OpenSSL library. > +# Mender-artifact requires OpenSSL, and is not yet compatible with OpenSSL3. > +# Mender-artifact also uses pkgconf to find the OpenSSL library. > +# Use host-pkgconf to force mender-artifact to use Buildroots host-openssl, as > +# newer distributions, such as Fedora, are starting to use OpenSSL3. > +HOST_MENDER_ARTIFACT_GO_ENV = \ > + GOFLAGS="-mod=vendor" \ > + PKG_CONFIG_PATH="$(HOST_DIR)/lib/pkgconfig" Why is -mod=vendor needed here? Also for pkg-config, I would prefer if we were to use the same variables as defined in HOST_MAKE_ENV (in package/Makefile.in), i.e: HOST_MAKE_ENV = \ PATH=$(BR_PATH) \ PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \ PKG_CONFIG_SYSROOT_DIR="/" \ PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig" Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:45:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:45:39 +0200 Subject: [Buildroot] [git commit] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b Message-ID: <20221006194555.858A986A63@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9e698c552bab51703014788ac1d61893868ee316 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mender-grubenv no longer uses the mender_grubenv* directories, instead opting to put the mender_grubenv directories in a grub-mender-grubenv top-level directory. While there is a legacy install mode which keeps the two separate directories, it is better to move forward and rip the bandaid off before it becomes too painful to update in the future if the legacy option is removed entirely. - Update the license file sha256 sum due to a year change. - mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied manually to grub.cfg. - BOOT_DIR replaces ENV_DIR in the Makefile. - The sleep grub2 module is now a requirement. - /etc/mender_grubenv.config file must be present on the system for the grub-mender-grubenv-{print,set} scripts to work properly. In addition to the above changes, update the mender example board file to work with the updated mender-grubenv version. Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- board/mender/x86_64/genimage-efi.cfg | 3 +++ configs/mender_x86_64_efi_defconfig | 2 +- package/mender-grubenv/mender-grubenv.hash | 4 ++-- package/mender-grubenv/mender-grubenv.mk | 22 +++++++++++++++------- 4 files changed, 21 insertions(+), 10 deletions(-) diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg index 10cefe2380..9c2723d8fb 100644 --- a/board/mender/x86_64/genimage-efi.cfg +++ b/board/mender/x86_64/genimage-efi.cfg @@ -3,6 +3,9 @@ image efi-part.vfat { file EFI { image = "efi-part/EFI" } + file grub-mender-grubenv { + image = "efi-part/grub-mender-grubenv" + } file bzImage { image = "bzImage" } diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 2ec6f6f76c..25a463abb3 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -19,7 +19,7 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_X86_64_EFI=y # Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES -BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp" +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep" BR2_TARGET_GRUB2_INSTALL_TOOLS=y # Required tools to create a mender image diff --git a/package/mender-grubenv/mender-grubenv.hash b/package/mender-grubenv/mender-grubenv.hash index 3be5f51a9e..193bff073b 100644 --- a/package/mender-grubenv/mender-grubenv.hash +++ b/package/mender-grubenv/mender-grubenv.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00a574d2bed8d54ba6739700da789a420a02de900df56dd2cfbe0df460a98dca mender-grubenv-1a7db967495bbe8be53b7a69dcb42822f39d9a74.tar.gz -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a LICENSE +sha256 b7a08eb3d996afb38c1a4f7c51b7eb44aec6197ff713ce75e4f39d5b448cfc82 mender-grubenv-2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b.tar.gz +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE diff --git a/package/mender-grubenv/mender-grubenv.mk b/package/mender-grubenv/mender-grubenv.mk index 9d5be8d8f4..8679ad9236 100644 --- a/package/mender-grubenv/mender-grubenv.mk +++ b/package/mender-grubenv/mender-grubenv.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_GRUBENV_VERSION = 1a7db967495bbe8be53b7a69dcb42822f39d9a74 +MENDER_GRUBENV_VERSION = 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b MENDER_GRUBENV_SITE = $(call github,mendersoftware,grub-mender-grubenv,$(MENDER_GRUBENV_VERSION)) MENDER_GRUBENV_LICENSE = Apache-2.0 MENDER_GRUBENV_LICENSE_FILES = LICENSE @@ -30,13 +30,15 @@ MENDER_GRUBENV_MODULES_MISSING_PC = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_PC)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/grub +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/grub define MENDER_GRUBENV_INSTALL_I386_CFG mkdir -p $(BINARIES_DIR)/boot-part/grub + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/grub/grub.cfg cp -dpfr $(TARGET_DIR)/boot/grub/grub.cfg \ - $(TARGET_DIR)/boot/grub/mender_grubenv* \ - $(BINARIES_DIR)/boot-part/grub + $(TARGET_DIR)/boot/grub/grub-mender-grubenv \ + $(BINARIES_DIR)/boot-part/ endef endif # BR2_TARGET_GRUB2_HAS_LEGACY_BOOT @@ -45,13 +47,16 @@ MENDER_GRUBENV_MODULES_MISSING_EFI = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/EFI/BOOT +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/EFI/BOOT define MENDER_GRUBENV_INSTALL_EFI_CFG mkdir -p $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg \ - $(TARGET_DIR)/boot/EFI/BOOT/mender_grubenv* \ $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub-mender-grubenv \ + $(BINARIES_DIR)/efi-part/ endef endif # BR2_TARGET_GRUB2_HAS_EFI_BOOT @@ -75,7 +80,10 @@ define MENDER_GRUBENV_BUILD_CMDS endef define MENDER_GRUBENV_INSTALL_TARGET_CMDS - $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install + $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) \ + install install-boot-env + # The grub-mender-grubenv-* utilities use this file to function. + echo 'ENV_DIR=/boot/grub-mender-grubenv' > $(TARGET_DIR)/etc/mender_grubenv.config endef define MENDER_GRUBENV_INSTALL_IMAGES_CMDS From thomas.petazzoni at bootlin.com Thu Oct 6 19:46:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:46:18 +0200 Subject: [Buildroot] [PATCH 4/4] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b In-Reply-To: <20221005212150.1384370-4-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-4-aduskett@gmail.com> Message-ID: <20221006214618.5c2e8a00@windsurf> On Wed, 5 Oct 2022 14:21:50 -0700 Adam Duskett wrote: > diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg > index 10cefe2380..4ed064c498 100644 > --- a/board/mender/x86_64/genimage-efi.cfg > +++ b/board/mender/x86_64/genimage-efi.cfg > @@ -3,6 +3,9 @@ image efi-part.vfat { > file EFI { > image = "efi-part/EFI" > } > + file grub-mender-grubenv { > + image = "efi-part/grub-mender-grubenv" Indentation here was not correct. I fixed that small nit and applied to master. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:50:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:50:57 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221006215057.49eec773@windsurf> Hello, On Thu, 6 Oct 2022 10:27:57 +0200 Gwenhael Goavec-Merou wrote: > - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, > bindings and python wrappers are produces using pybind: this why python-pybind > is a buildtime dependency. This one is a stagging only package (nothing > installed into target directory -> no select BR2_PACKAGE_PYTHON_PYBIND > added to Config.in but GNURADIO_DEPENDENCIES is updated with python-pybind). I am sorry, but this still doesn't make any sense, and will in fact cause build failures. A package cannot have a target package in its _DEPENDENCIES variable without selecting it. If python-pybind is needed at build time on the host, then GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing needs to be done in Config.in. If python-pybind is needed on the target, then two options: (1) It's needed only at runtime => it should be selected in Config.in. (2) It's needed at build-time => it should be selected in Config.in *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd like to see a serious justification, because it is really uncommon to have target Python packages be build-time dependencies. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From wg at grandegger.com Thu Oct 6 19:52:11 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Thu, 6 Oct 2022 21:52:11 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging Message-ID: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> UDisks2 provides an Library API [1] for accessing the UDisks2 service via "libudisks2.so". For development of UDisks2 clients, install to staging as well! This issue has been reported as bug [2] as well. [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] [2] https://bugs.busybox.net/show_bug.cgi?id=15026 Signed-off-by: Wolfgang Grandegger --- package/udisks/udisks.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk index 2bf519a2cc..959333d01f 100644 --- a/package/udisks/udisks.mk +++ b/package/udisks/udisks.mk @@ -10,6 +10,7 @@ UDISKS_SITE = https://github.com/storaged-project/udisks/releases/download/udisk UDISKS_LICENSE = GPL-2.0+ UDISKS_LICENSE_FILES = COPYING UDISKS_CPE_ID_VENDOR = freedesktop +UDISKS_INSTALL_STAGING = YES UDISKS_DEPENDENCIES = \ host-pkgconf \ -- 2.34.1 From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:03 +0200 Subject: [Buildroot] [git commit] configs/octavo_osd32mp1_red: update BSP components Message-ID: <20221006200251.84FA186AC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f088e6841d2b338037d25e50aaf8fc28b8fb384 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update description: TF-A to v2.4-stm32mp-r1 U-boot to version v2020.10-stm32mp-r2.1 Linux to v5.10-stm32mp-r2.1 This patch also updates U-boot to to use FIP image. Reference: https://octavosystems.com/octavo_products/osd32mp1-red/ The device tree blobs, and the U-boot patches come from Octavo System: https://github.com/octavosystems/meta-octavo-osd32mp1 Signed-off-by: Kory Maincent Signed-off-by: Thomas Petazzoni --- board/octavo/osd32mp1-red/genimage.cfg | 8 +- ...d32mp1-red.dts => stm32mp157c-osd32mp1-red.dts} | 591 +++--- .../linux-dts/stm32mp157c-osd32mp1-red.dtsi | 2077 -------------------- .../overlay/boot/extlinux/extlinux.conf | 2 +- ...0001-Add-OSD32MP1-RED-Device-Tree-support.patch | 1180 ++++++----- ...32mp15_trusted_defconfig-disable-environm.patch | 47 +- ...x4Gb-1066-binG.dtsi => osd32mp1_ddr_1x4Gb.dtsi} | 12 +- .../tfa-dts/stm32mp157c-osd32mp1-red-fw-config.dts | 6 + ...d32mp1-red.dts => stm32mp157c-osd32mp1-red.dts} | 672 +++---- configs/octavo_osd32mp1_red_defconfig | 24 +- 10 files changed, 1308 insertions(+), 3311 deletions(-) Patch is too large, so refusing to show it From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:36 +0200 Subject: [Buildroot] [git commit] package/cups-filters: fix check-package warning Message-ID: <20221006200251.A78E686AC7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f76d177dacad9f9f56cfaa955f948398c230bc23 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: package/cups-filters/cups-filters.mk:83: consecutive empty lines Signed-off-by: Thomas Petazzoni --- package/cups-filters/cups-filters.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/cups-filters/cups-filters.mk b/package/cups-filters/cups-filters.mk index 7a3c894112..3250649e07 100644 --- a/package/cups-filters/cups-filters.mk +++ b/package/cups-filters/cups-filters.mk @@ -80,7 +80,6 @@ else CUPS_FILTERS_CONF_OPTS += --disable-exif endif - define CUPS_FILTERS_INSTALL_INIT_SYSV $(INSTALL) -D -m 0755 package/cups-filters/S82cups-browsed \ $(TARGET_DIR)/etc/init.d/S82cups-browsed From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:26 +0200 Subject: [Buildroot] [git commit] configs/octavo_osd32mp1_brk: update BSP components Message-ID: <20221006200251.9991086A62@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=04ae71b567587977be9d07ade764159b31f1f403 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update description: TF-A to v2.4-stm32mp-r1 U-boot to version v2020.10-stm32mp-r2.1 Linux to v5.10-stm32mp-r2.1 This patch also updates U-boot to to use FIP image. Reference: https://octavosystems.com/octavo_products/osd32mp1-brk/ The device tree blobs, and the U-boot patches come from Octavo System: https://github.com/octavosystems/meta-octavo-osd32mp1 Signed-off-by: Kory Maincent Signed-off-by: Thomas Petazzoni --- board/octavo/osd32mp1-brk/genimage.cfg | 4 +- .../linux-dts/stm32mp157c-osd32mp1-brk.dts | 809 ++++--- ...0001-Add-OSD32MP1-BRK-device-tree-support.patch | 1509 +++++++++++++ .../uboot/0001-osd32mp1-BRK-board-added.patch | 2349 -------------------- .../uboot/0002-Add-OSD32MP1-BRK-build-config.patch | 881 ++++++++ .../{osd32mp1_ddr.dtsi => osd32mp1_ddr_1x4Gb.dtsi} | 2 + .../tfa-dts/stm32mp157c-osd32mp1-brk-fw-config.dts | 6 + .../tfa-dts/stm32mp157c-osd32mp1-brk.dts | 502 ++--- configs/octavo_osd32mp1_brk_defconfig | 20 +- 9 files changed, 3027 insertions(+), 3055 deletions(-) Patch is too large, so refusing to show it From thomas.petazzoni at bootlin.com Thu Oct 6 20:03:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:03:35 +0200 Subject: [Buildroot] [PATCH 1/2] board/octavo/osd32mp1-red: update BSP components In-Reply-To: <20221005075815.305236-1-kory.maincent@bootlin.com> References: <20221005075815.305236-1-kory.maincent@bootlin.com> Message-ID: <20221006220335.22132976@windsurf> On Wed, 5 Oct 2022 09:58:13 +0200 K?ry Maincent via buildroot wrote: > From: Kory Maincent > > Update description: > TF-A to v2.4-stm32mp-r1 > U-boot to version v2020.10-stm32mp-r2.1 > Linux to v5.10-stm32mp-r2.1 > > This patch also updates U-boot to to use FIP image. > > Reference: > > https://octavosystems.com/octavo_products/osd32mp1-red/ > > The device tree blobs, and the U-boot patches come from Octavo System: > > https://github.com/octavosystems/meta-octavo-osd32mp1 > > Signed-off-by: Kory Maincent I've applied both patches, but to be honest, I hate having these huge Device Tree files in Buildroot... Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 20:09:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:09:35 +0200 Subject: [Buildroot] [git commit] package/efibootmgr: bump to version 18 Message-ID: <20221006200948.0D88386AD7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5d52814f60d5ed6b981dabf0cf6d439a203560e2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches which are already applied upstream. Signed-off-by: Erico Nunes Signed-off-by: Thomas Petazzoni --- .../efibootmgr/0001-Allow-build-with-uClibc.patch | 40 ---------------------- package/efibootmgr/0002-remove-extra-decl.patch | 28 --------------- package/efibootmgr/efibootmgr.hash | 2 +- package/efibootmgr/efibootmgr.mk | 2 +- 4 files changed, 2 insertions(+), 70 deletions(-) diff --git a/package/efibootmgr/0001-Allow-build-with-uClibc.patch b/package/efibootmgr/0001-Allow-build-with-uClibc.patch deleted file mode 100644 index fd29233dc3..0000000000 --- a/package/efibootmgr/0001-Allow-build-with-uClibc.patch +++ /dev/null @@ -1,40 +0,0 @@ -From bbfcc60497c326576bb23cb01d90115ef3cf6947 Mon Sep 17 00:00:00 2001 -From: Andy Shevchenko -Date: Fri, 25 Nov 2016 20:26:52 +0200 -Subject: [PATCH] Remove unneeded include - -This fixes the build with uClibc. - -Signed-off-by: Andy Shevchenko ---- - src/efibootdump.c | 1 - - src/eficonman.c | 1 - - 2 files changed, 2 deletions(-) - -diff --git a/src/efibootdump.c b/src/efibootdump.c -index 6ff8360..7c5a1c5 100644 ---- a/src/efibootdump.c -+++ b/src/efibootdump.c -@@ -19,7 +19,6 @@ - #include - #include - #include --#include - #include - - #include "error.h" -diff --git a/src/eficonman.c b/src/eficonman.c -index 2c2be38..9bfae79 100644 ---- a/src/eficonman.c -+++ b/src/eficonman.c -@@ -17,7 +17,6 @@ - #include - #include - #include --#include - #include - - #define _(String) gettext (String) --- -2.10.2 - diff --git a/package/efibootmgr/0002-remove-extra-decl.patch b/package/efibootmgr/0002-remove-extra-decl.patch deleted file mode 100644 index f838d50a20..0000000000 --- a/package/efibootmgr/0002-remove-extra-decl.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 99b578501643377e0b1994b2a068b790d189d5ad Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Wed, 13 Jun 2018 09:41:01 -0400 -Subject: [PATCH] remove extra decl - -Downloaded from upstream commit -https://github.com/rhboot/efibootmgr/commit/99b578501643377e0b1994b2a068b790d189d5ad - -Signed-off-by: Peter Jones -Signed-off-by: Bernd Kuhls ---- - src/efibootmgr.c | 3 --- - 1 file changed, 3 deletions(-) - -diff --git a/src/efibootmgr.c b/src/efibootmgr.c -index de38f01..4e1a680 100644 ---- a/src/efibootmgr.c -+++ b/src/efibootmgr.c -@@ -1536,9 +1536,6 @@ parse_opts(int argc, char **argv) - "invalid numeric value %s\n", - optarg); - } -- /* XXX efivar-36 accidentally doesn't have a public -- * header for this */ -- extern int efi_set_verbose(int verbosity, FILE *errlog); - efi_set_verbose(opts.verbose - 2, stderr); - break; - case 'V': diff --git a/package/efibootmgr/efibootmgr.hash b/package/efibootmgr/efibootmgr.hash index fdbc9a2732..71a9826331 100644 --- a/package/efibootmgr/efibootmgr.hash +++ b/package/efibootmgr/efibootmgr.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 22a95ebe0d5c9fb2915b3a100450f8f37484d1dbb8b296f55b343cc84f10397d efibootmgr-17.tar.gz +sha256 442867d12f8525034a404fc8af3036dba8e1fc970998af2486c3b940dfad0874 efibootmgr-18.tar.gz sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/efibootmgr/efibootmgr.mk b/package/efibootmgr/efibootmgr.mk index 7e09b5f659..672a93c282 100644 --- a/package/efibootmgr/efibootmgr.mk +++ b/package/efibootmgr/efibootmgr.mk @@ -4,7 +4,7 @@ # ################################################################################ -EFIBOOTMGR_VERSION = 17 +EFIBOOTMGR_VERSION = 18 EFIBOOTMGR_SITE = $(call github,rhboot,efibootmgr,$(EFIBOOTMGR_VERSION)) EFIBOOTMGR_LICENSE = GPL-2.0+ EFIBOOTMGR_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 20:09:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:09:32 +0200 Subject: [Buildroot] [git commit] package/efivar: bump to version 38 Message-ID: <20221006200948.03F8E86AD5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f24029b561fbda0953c7dbd93d2485b03873996d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop backported patches and rebase the ones that are still relevant. >From version 37 to 38, there is a new build system in place, which is still custom Makefiles. This introduces a host-efivar package to account for the 'makeguids' tool. Previously it was not too cumbersome to work around building that tool for the host, but with the new build system it is increasingly coupled with the target build that the least hacky way to work around it is with a host package and a Makefile patch. Signed-off-by: Erico Nunes Signed-off-by: Thomas Petazzoni --- package/efivar/0001-Allow-build-with-uClibc.patch | 12 +- ...ormat_guid-handle-misaligned-guid-pointer.patch | 62 -------- ...rror.patch => 0002-gcc.specs-drop-Werror.patch} | 34 ++-- ...-places-Werror-address-of-packed-member-c.patch | 174 --------------------- ...-efivar-isolate-makeguids-host-tool-build.patch | 48 ++++++ ...-error-of-Werror-address-of-packed-member.patch | 57 ------- .../0005-ucs2.h-remove-unused-variable.patch | 35 ----- ...logic-that-checks-for-UCS-2-string-termin.patch | 32 ---- package/efivar/efivar.hash | 2 +- package/efivar/efivar.mk | 24 ++- 10 files changed, 93 insertions(+), 387 deletions(-) diff --git a/package/efivar/0001-Allow-build-with-uClibc.patch b/package/efivar/0001-Allow-build-with-uClibc.patch index 0db9955760..0da80f26d2 100644 --- a/package/efivar/0001-Allow-build-with-uClibc.patch +++ b/package/efivar/0001-Allow-build-with-uClibc.patch @@ -1,4 +1,4 @@ -From f1f24eb486c4376066884bae3c31f1c455a79836 Mon Sep 17 00:00:00 2001 +From bfd9cd9e603ef0d0e593d4432048bffc2acfeb7c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 25 Nov 2016 19:42:27 +0200 Subject: [PATCH] Allow build with uClibc @@ -6,15 +6,17 @@ Subject: [PATCH] Allow build with uClibc Basically this replaces type definitions in . Signed-off-by: Andy Shevchenko +[Erico: rebase to 38] +Signed-off-by: Erico Nunes --- src/export.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/src/export.c b/src/export.c -index 8321bd3..ef36add 100644 +index db5e637..21c5617 100644 --- a/src/export.c +++ b/src/export.c -@@ -23,10 +23,16 @@ +@@ -9,10 +9,16 @@ #include #include #include @@ -29,9 +31,9 @@ index 8321bd3..ef36add 100644 +#include +#endif + - #define EFIVAR_MAGIC 0xf3df1597 + #define EFIVAR_MAGIC 0xf3df1597u #define ATTRS_UNSET 0xa5a5a5a5a5a5a5a5 -- -2.20.1 +2.37.3 diff --git a/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch b/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch deleted file mode 100644 index 37fd39a127..0000000000 --- a/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch +++ /dev/null @@ -1,62 +0,0 @@ -From b98ba8921010d03f46704a476c69861515deb1ca Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Mon, 7 Jan 2019 10:30:59 -0500 -Subject: [PATCH] dp.h: make format_guid() handle misaligned guid pointers - safely. - -GCC 9 adds -Werror=address-of-packed-member, which causes us to see the -build error reported at - https://bugzilla.opensuse.org/show_bug.cgi?id=1120862 . - -That bug report shows us the following: - -In file included from dp.c:26: -dp.h: In function 'format_vendor_helper': -dp.h:120:37: error: taking address of packed member of 'struct ' may result in an unaligned pointer value [-Werror=address-of-packed-member] - 120 | format_guid(buf, size, off, label, &dp->hw_vendor.vendor_guid); - | ^~~~~~~~~~~~~~~~~~~~~~~~~~ -dp.h:74:25: note: in definition of macro 'format_guid' - 74 | _rc = efi_guid_to_str(guid, &_guidstr); \ - | ^~~~ -cc1: all warnings being treated as errors - -This patch makes format_guid() use a local variable as a bounce buffer -in the case that the guid we're passed is aligned as chaotic neutral. - -Note that this only fixes this instance and there may be others that bz -didn't show because it exited too soon, and I don't have a gcc 9 build -in front of me right now. - -Signed-off-by: Peter Jones -[james.hilliard1 at gmail.com: backport from upstream commit -b98ba8921010d03f46704a476c69861515deb1ca] -Signed-off-by: James Hilliard ---- - src/dp.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/src/dp.h b/src/dp.h -index aa4e390..20cb608 100644 ---- a/src/dp.h -+++ b/src/dp.h -@@ -70,8 +70,15 @@ - #define format_guid(buf, size, off, dp_type, guid) ({ \ - int _rc; \ - char *_guidstr = NULL; \ -- \ -- _rc = efi_guid_to_str(guid, &_guidstr); \ -+ efi_guid_t _guid; \ -+ const efi_guid_t * const _guid_p = \ -+ likely(__alignof__(guid) == sizeof(guid)) \ -+ ? guid \ -+ : &_guid; \ -+ \ -+ if (unlikely(__alignof__(guid) == sizeof(guid))) \ -+ memmove(&_guid, guid, sizeof(_guid)); \ -+ _rc = efi_guid_to_str(_guid_p, &_guidstr); \ - if (_rc < 0) { \ - efi_error("could not build %s GUID DP string", \ - dp_type); \ --- -2.20.1 - diff --git a/package/efivar/0007-gcc.specs-drop-Werror.patch b/package/efivar/0002-gcc.specs-drop-Werror.patch similarity index 68% rename from package/efivar/0007-gcc.specs-drop-Werror.patch rename to package/efivar/0002-gcc.specs-drop-Werror.patch index aa717fedaf..a25b844906 100644 --- a/package/efivar/0007-gcc.specs-drop-Werror.patch +++ b/package/efivar/0002-gcc.specs-drop-Werror.patch @@ -1,4 +1,4 @@ -From 8d5cf3347cce9d644f670ffd1d48e71d74635481 Mon Sep 17 00:00:00 2001 +From a1d469753528a98aec971377a526619da5054b20 Mon Sep 17 00:00:00 2001 From: Fabrice Fontaine Date: Mon, 22 Mar 2021 07:52:34 +0100 Subject: [PATCH] gcc.specs: drop -Werror @@ -22,23 +22,25 @@ Signed-off-by: Fabrice Fontaine [Upstream status: not upstreamable as Makefiles were reworked and a new ERRORS parameter was added: https://github.com/rhboot/efivar/commit/998f617cec92d526e1fadb745673ceef63fa1483] +[Erico: rebase to 38] +Signed-off-by: Erico Nunes --- - gcc.specs | 2 +- + src/include/defaults.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/gcc.specs b/gcc.specs -index 45d43d1..1baf11a 100644 ---- a/gcc.specs -+++ b/gcc.specs -@@ -2,7 +2,7 @@ - + -D_GNU_SOURCE - - *efivar_cpp_options: -- -Werror -Wall -std=gnu11 -Wextra -+ -Wall -std=gnu11 -Wextra - - *cpp_options: - + %(efivar_cpp_options) +diff --git a/src/include/defaults.mk b/src/include/defaults.mk +index 632b155..2a9537a 100644 +--- a/src/include/defaults.mk ++++ b/src/include/defaults.mk +@@ -29,7 +29,7 @@ WARNINGS_GCC ?= + WARNINGS_CCC_ANALYZER ?= $(WARNINGS_GCC) + WARNINGS ?= -Wall -Wextra $(call family,WARNINGS) + ERRORS_GCC ?= +-ERRORS ?= -Werror $(call family,ERRORS) ++ERRORS ?= $(call family,ERRORS) + CPPFLAGS ?= + override _CPPFLAGS := $(CPPFLAGS) + override CPPFLAGS = $(_CPPFLAGS) -DLIBEFIVAR_VERSION=$(VERSION) \ -- -2.30.1 +2.37.3 diff --git a/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch b/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch deleted file mode 100644 index 52db443b7e..0000000000 --- a/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch +++ /dev/null @@ -1,174 +0,0 @@ -From c3c553db85ff10890209d0fe48fb4856ad68e4e0 Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Thu, 21 Feb 2019 15:20:12 -0500 -Subject: [PATCH] Fix all the places -Werror=address-of-packed-member catches. - -This gets rid of all the places GCC 9's -Werror=address-of-packed-member -flags as problematic. - -Fixes github issue #123 - -Signed-off-by: Peter Jones -[james.hilliard1 at gmail.com: backport from upstream commit -c3c553db85ff10890209d0fe48fb4856ad68e4e0] -Signed-off-by: James Hilliard ---- - src/dp-message.c | 6 ++++-- - src/dp.h | 12 ++++-------- - src/guid.c | 2 +- - src/include/efivar/efivar.h | 2 +- - src/ucs2.h | 27 +++++++++++++++++++-------- - 5 files changed, 29 insertions(+), 20 deletions(-) - -diff --git a/src/dp-message.c b/src/dp-message.c -index 3724e5f..9f96466 100644 ---- a/src/dp-message.c -+++ b/src/dp-message.c -@@ -620,11 +620,13 @@ _format_message_dn(char *buf, size_t size, const_efidp dp) - ) / sizeof(efi_ip_addr_t); - format(buf, size, off, "Dns", "Dns("); - for (int i=0; i < end; i++) { -- const efi_ip_addr_t *addr = &dp->dns.addrs[i]; -+ efi_ip_addr_t addr; -+ -+ memcpy(&addr, &dp->dns.addrs[i], sizeof(addr)); - if (i != 0) - format(buf, size, off, "Dns", ","); - format_ip_addr(buf, size, off, "Dns", -- dp->dns.is_ipv6, addr); -+ dp->dns.is_ipv6, &addr); - } - format(buf, size, off, "Dns", ")"); - break; -diff --git a/src/dp.h b/src/dp.h -index 20cb608..1f921d5 100644 ---- a/src/dp.h -+++ b/src/dp.h -@@ -71,13 +71,9 @@ - int _rc; \ - char *_guidstr = NULL; \ - efi_guid_t _guid; \ -- const efi_guid_t * const _guid_p = \ -- likely(__alignof__(guid) == sizeof(guid)) \ -- ? guid \ -- : &_guid; \ -- \ -- if (unlikely(__alignof__(guid) == sizeof(guid))) \ -- memmove(&_guid, guid, sizeof(_guid)); \ -+ const efi_guid_t * const _guid_p = &_guid; \ -+ \ -+ memmove(&_guid, guid, sizeof(_guid)); \ - _rc = efi_guid_to_str(_guid_p, &_guidstr); \ - if (_rc < 0) { \ - efi_error("could not build %s GUID DP string", \ -@@ -86,7 +82,7 @@ - _guidstr = onstack(_guidstr, \ - strlen(_guidstr)+1); \ - _rc = format(buf, size, off, dp_type, "%s", \ -- _guidstr); \ -+ _guidstr); \ - } \ - _rc; \ - }) -diff --git a/src/guid.c b/src/guid.c -index 306c9ff..3156b3b 100644 ---- a/src/guid.c -+++ b/src/guid.c -@@ -31,7 +31,7 @@ - extern const efi_guid_t efi_guid_zero; - - int NONNULL(1, 2) PUBLIC --efi_guid_cmp(const efi_guid_t *a, const efi_guid_t *b) -+efi_guid_cmp(const void * const a, const void * const b) - { - return memcmp(a, b, sizeof (efi_guid_t)); - } -diff --git a/src/include/efivar/efivar.h b/src/include/efivar/efivar.h -index 316891c..ad6449d 100644 ---- a/src/include/efivar/efivar.h -+++ b/src/include/efivar/efivar.h -@@ -128,7 +128,7 @@ extern int efi_symbol_to_guid(const char *symbol, efi_guid_t *guid) - - extern int efi_guid_is_zero(const efi_guid_t *guid); - extern int efi_guid_is_empty(const efi_guid_t *guid); --extern int efi_guid_cmp(const efi_guid_t *a, const efi_guid_t *b); -+extern int efi_guid_cmp(const void * const a, const void * const b); - - /* import / export functions */ - typedef struct efi_variable efi_variable_t; -diff --git a/src/ucs2.h b/src/ucs2.h -index dbb5900..edd8367 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -23,16 +23,21 @@ - (((val) & ((mask) << (shift))) >> (shift)) - - static inline size_t UNUSED --ucs2len(const uint16_t * const s, ssize_t limit) -+ucs2len(const void *vs, ssize_t limit) - { - ssize_t i; -- for (i = 0; i < (limit >= 0 ? limit : i+1) && s[i] != (uint16_t)0; i++) -+ const uint16_t *s = vs; -+ const uint8_t *s8 = vs; -+ -+ for (i = 0; -+ i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -+ i++, s8 += 2, s++) - ; - return i; - } - - static inline size_t UNUSED --ucs2size(const uint16_t * const s, ssize_t limit) -+ucs2size(const void *s, ssize_t limit) - { - size_t rc = ucs2len(s, limit); - rc *= sizeof (uint16_t); -@@ -69,10 +74,11 @@ utf8size(uint8_t *s, ssize_t limit) - } - - static inline unsigned char * UNUSED --ucs2_to_utf8(const uint16_t * const chars, ssize_t limit) -+ucs2_to_utf8(const void * const voidchars, ssize_t limit) - { - ssize_t i, j; - unsigned char *ret; -+ const uint16_t * const chars = voidchars; - - if (limit < 0) - limit = ucs2len(chars, -1); -@@ -124,10 +130,12 @@ ucs2_to_utf8(const uint16_t * const chars, ssize_t limit) - } - - static inline ssize_t UNUSED NONNULL(4) --utf8_to_ucs2(uint16_t *ucs2, ssize_t size, int terminate, uint8_t *utf8) -+utf8_to_ucs2(void *ucs2void, ssize_t size, int terminate, uint8_t *utf8) - { - ssize_t req; - ssize_t i, j; -+ uint16_t *ucs2 = ucs2void; -+ uint16_t val16; - - if (!ucs2 && size > 0) { - errno = EINVAL; -@@ -162,10 +170,13 @@ utf8_to_ucs2(uint16_t *ucs2, ssize_t size, int terminate, uint8_t *utf8) - val = utf8[i] & 0x7f; - i += 1; - } -- ucs2[j] = val; -+ val16 = val; -+ ucs2[j] = val16; -+ } -+ if (terminate) { -+ val16 = 0; -+ ucs2[j++] = val16; - } -- if (terminate) -- ucs2[j++] = (uint16_t)0; - return j; - }; - --- -2.20.1 - diff --git a/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch b/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch new file mode 100644 index 0000000000..f136bf2cd3 --- /dev/null +++ b/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch @@ -0,0 +1,48 @@ +From b069a48abd62a669851b9c3b501d579748dab0fd Mon Sep 17 00:00:00 2001 +From: Erico Nunes +Date: Mon, 3 Oct 2022 18:16:55 +0200 +Subject: [PATCH] efivar: isolate makeguids host tool build + +efivar build includes a 'makeguids' host tool which is normally built by +distributions during the package build step. This is unfortunately not +written with cross-compilation in mind, since it needs to build for the +host architecture, including the build of object files which it then +assumes can be linked into the target library. +To make the packaging process simpler for a cross-compilation system +like Buildroot, separate the 'makeguids' tool build to an explicit make +target and remove target build dependencies from it. +This way, Buildroot can build the tool separately in a host build step +and the target build step can then be straightforward. + +Signed-off-by: Erico Nunes +--- + src/Makefile | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +diff --git a/src/Makefile b/src/Makefile +index 0e423c4..82c59c2 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -68,7 +68,6 @@ makeguids : LDFLAGS=$(HOST_LDFLAGS) + makeguids : CCLDFLAGS=$(HOST_CCLDFLAGS) + makeguids : $(MAKEGUIDS_OBJECTS) + +-$(MAKEGUIDS_OUTPUT) : makeguids + $(MAKEGUIDS_OUTPUT) : guids.txt + @set -e ; \ + missing=no ; \ +@@ -81,9 +80,9 @@ $(MAKEGUIDS_OUTPUT) : guids.txt + if [ "$${missing}" != "no" ]; then \ + exit 1 ; \ + fi +- ./makeguids $(LD_DASH_T) guids.txt guid-symbols.c include/efivar/efivar-guids.h guids.lds ++ makeguids $(LD_DASH_T) guids.txt guid-symbols.c include/efivar/efivar-guids.h guids.lds + +-prep : makeguids $(GENERATED_SOURCES) ++prep : $(GENERATED_SOURCES) + + $(LIBEFIVAR_OBJECTS) $(LIBEFIBOOT_OBJECTS) : prep + +-- +2.37.3 + diff --git a/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch b/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch deleted file mode 100644 index b103e975a3..0000000000 --- a/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0dad6d78a7fb5f6c5fb4a1d646040539db6cf865 Mon Sep 17 00:00:00 2001 -From: Chih-Wei Huang -Date: Tue, 26 Feb 2019 18:42:20 +0800 -Subject: [PATCH] Fix another error of -Werror=address-of-packed-member - -Android 9 clang complains: - -external/efivar/src/dp-message.c:367:24: error: taking address of packed member '' of class or structure 'efidp_infiniband' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member] - (efi_guid_t *)&dp->infiniband.ioc_guid); - ^~~~~~~~~~~~~~~~~~~~~~~ -external/efivar/src/dp.h:76:19: note: expanded from macro 'format_guid' - memmove(&_guid, guid, sizeof(_guid)); \ - ^~~~ -1 error generated. - -Since commit c3c553d the fifth parameter of format_guid() is treated as -a const void *. The casting is unnecessary. - -Signed-off-by: Chih-Wei Huang -[james.hilliard1 at gmail.com: backport from upstream commit -0dad6d78a7fb5f6c5fb4a1d646040539db6cf865] -Signed-off-by: James Hilliard ---- - src/dp-media.c | 3 +-- - src/dp-message.c | 2 +- - 2 files changed, 2 insertions(+), 3 deletions(-) - -diff --git a/src/dp-media.c b/src/dp-media.c -index 96a576f..be691c4 100644 ---- a/src/dp-media.c -+++ b/src/dp-media.c -@@ -46,8 +46,7 @@ _format_media_dn(char *buf, size_t size, const_efidp dp) - break; - case EFIDP_HD_SIGNATURE_GUID: - format(buf, size, off, "HD", "GPT,"); -- format_guid(buf, size, off, "HD", -- (efi_guid_t *)dp->hd.signature); -+ format_guid(buf, size, off, "HD", dp->hd.signature); - format(buf, size, off, "HD", - ",0x%"PRIx64",0x%"PRIx64")", - dp->hd.start, dp->hd.size); -diff --git a/src/dp-message.c b/src/dp-message.c -index 9f96466..6b8e907 100644 ---- a/src/dp-message.c -+++ b/src/dp-message.c -@@ -364,7 +364,7 @@ _format_message_dn(char *buf, size_t size, const_efidp dp) - dp->infiniband.port_gid[1], - dp->infiniband.port_gid[0]); - format_guid(buf, size, off, "Infiniband", -- (efi_guid_t *)&dp->infiniband.ioc_guid); -+ &dp->infiniband.ioc_guid); - format(buf, size, off, "Infiniband", - ",%"PRIu64",%"PRIu64")", - dp->infiniband.target_port_id, --- -2.20.1 - diff --git a/package/efivar/0005-ucs2.h-remove-unused-variable.patch b/package/efivar/0005-ucs2.h-remove-unused-variable.patch deleted file mode 100644 index a814043ce8..0000000000 --- a/package/efivar/0005-ucs2.h-remove-unused-variable.patch +++ /dev/null @@ -1,35 +0,0 @@ -From fdb803402fb32fa6d020bac57a40c7efe4aabb7d Mon Sep 17 00:00:00 2001 -From: Javier Martinez Canillas -Date: Tue, 5 Mar 2019 17:23:24 +0100 -Subject: [PATCH] ucs2.h: remove unused variable - -The const uint16_t pointer is not used since now the two bytes of the -UCS-2 chars are checked to know if is the termination of the string. - -Signed-off-by: Javier Martinez Canillas -Signed-off-by: Peter Korsgaard ---- - src/ucs2.h | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/src/ucs2.h b/src/ucs2.h -index edd8367..e0390c3 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -26,12 +26,11 @@ static inline size_t UNUSED - ucs2len(const void *vs, ssize_t limit) - { - ssize_t i; -- const uint16_t *s = vs; - const uint8_t *s8 = vs; - - for (i = 0; - i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -- i++, s8 += 2, s++) -+ i++, s8 += 2) - ; - return i; - } --- -2.20.1 - diff --git a/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch b/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch deleted file mode 100644 index 00b20332ef..0000000000 --- a/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 4e04afc2df9bbc26e5ab524b53a6f4f1e61d7c9e Mon Sep 17 00:00:00 2001 -From: Javier Martinez Canillas -Date: Tue, 5 Mar 2019 17:23:32 +0100 -Subject: [PATCH] ucs2.h: fix logic that checks for UCS-2 string termination - -Currently the loop to count the lenght of the UCS-2 string ends if either -of the two bytes are 0, but 0 is a valid value for UCS-2 character codes. - -So only break the loop when 0 is the value for both UCS-2 char bytes. - -Signed-off-by: Javier Martinez Canillas -Signed-off-by: Peter Korsgaard ---- - src/ucs2.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/ucs2.h b/src/ucs2.h -index e0390c3..fd8b056 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -29,7 +29,7 @@ ucs2len(const void *vs, ssize_t limit) - const uint8_t *s8 = vs; - - for (i = 0; -- i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -+ i < (limit >= 0 ? limit : i+1) && !(s8[0] == 0 && s8[1] == 0); - i++, s8 += 2) - ; - return i; --- -2.20.1 - diff --git a/package/efivar/efivar.hash b/package/efivar/efivar.hash index 132022bf67..827b46baa4 100644 --- a/package/efivar/efivar.hash +++ b/package/efivar/efivar.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 74c52b4f479120fb6639e753e71163ba3f557a7a67c0be225593f9f05b253f36 efivar-37.tar.gz +sha256 e3bbde37238bd47af1fcf270dc0ef1f4be030d86364c917b93669222ec52bbea efivar-38.tar.gz sha256 91df770634adc2755e78cae33a0d01e702ce2f69046408ae93d0d934ff29691b COPYING diff --git a/package/efivar/efivar.mk b/package/efivar/efivar.mk index 8708057b18..8b1d338bec 100644 --- a/package/efivar/efivar.mk +++ b/package/efivar/efivar.mk @@ -4,31 +4,44 @@ # ################################################################################ -EFIVAR_VERSION = 37 +EFIVAR_VERSION = 38 EFIVAR_SITE = $(call github,rhboot,efivar,$(EFIVAR_VERSION)) EFIVAR_LICENSE = LGPL-2.1 EFIVAR_LICENSE_FILES = COPYING EFIVAR_INSTALL_STAGING = YES +EFIVAR_DEPENDENCIES = host-efivar # -fPIC is needed at least on MIPS, otherwise fails to build shared # -library. +# SUBDIRS is redefined so it skips building docs. +# LD_DASH_T is redefined as the linker detection does not seem to +# work properly for cross-compilation. EFIVAR_MAKE_OPTS = \ libdir=/usr/lib \ - LDFLAGS="$(TARGET_LDFLAGS) -fPIC" + LDFLAGS="$(TARGET_LDFLAGS) -fPIC" \ + TOPDIR=$(@D) \ + SUBDIRS=src \ + LD_DASH_T=-T -define EFIVAR_BUILD_CMDS +define HOST_EFIVAR_BUILD_CMDS # makeguids is an internal host tool and must be built separately with # $(HOST_CC), otherwise it gets cross-built. $(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) \ CFLAGS="$(HOST_CFLAGS) -std=gnu99" \ - $(MAKE) -C $(@D)/src gcc_cflags= makeguids + TOPDIR=$(@D) CFLAGS_GCC= \ + $(MAKE) -C $(@D)/src makeguids +endef +define EFIVAR_BUILD_CMDS $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ - AR=$(TARGET_AR) NM=$(TARGET_NM) RANLIB=$(TARGET_RANLIB) \ $(EFIVAR_MAKE_OPTS) \ all endef +define HOST_EFIVAR_INSTALL_CMDS + $(INSTALL) -D -m 0755 $(@D)/src/makeguids $(HOST_DIR)/usr/bin/makeguids +endef + define EFIVAR_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ $(EFIVAR_MAKE_OPTS) \ @@ -44,3 +57,4 @@ define EFIVAR_INSTALL_TARGET_CMDS endef $(eval $(generic-package)) +$(eval $(host-generic-package)) From thomas.petazzoni at bootlin.com Thu Oct 6 20:12:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:12:36 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: <20221004143943.1456694-1-nunes.erico@gmail.com> References: <20221004143943.1456694-1-nunes.erico@gmail.com> Message-ID: <20221006221236.7dd6580a@windsurf> On Tue, 4 Oct 2022 16:39:42 +0200 Erico Nunes wrote: > Drop backported patches and rebase the ones that are still relevant. > > From version 37 to 38, there is a new build system in place, which is > still custom Makefiles. > This introduces a host-efivar package to account for the 'makeguids' > tool. Previously it was not too cumbersome to work around building that > tool for the host, but with the new build system it is increasingly > coupled with the target build that the least hacky way to work around it > is with a host package and a Makefile patch. > > Signed-off-by: Erico Nunes I've applied both, but I'm not super fan of the Buildroot-specific patch in efivar to not build makeguids. Would it be possible to work with the upstream efivar community to find a suitable solution to this issue? Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From gwenj at trabucayre.com Thu Oct 6 20:13:40 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 22:13:40 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <20221006215057.49eec773@windsurf> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> Message-ID: <20221006221340.45c07636@x230_1.trabucayre.com> Hello, On Thu, 6 Oct 2022 21:50:57 +0200 Thomas Petazzoni wrote: > Hello, > > On Thu, 6 Oct 2022 10:27:57 +0200 > Gwenhael Goavec-Merou wrote: > > > - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, > > bindings and python wrappers are produces using pybind: this why > > python-pybind is a buildtime dependency. This one is a stagging only > > package (nothing installed into target directory -> no select > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES is > > updated with python-pybind). > > I am sorry, but this still doesn't make any sense, and will in fact > cause build failures. A package cannot have a target package in its > _DEPENDENCIES variable without selecting it. > > If python-pybind is needed at build time on the host, then > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > needs to be done in Config.in. > > If python-pybind is needed on the target, then two options: > > (1) It's needed only at runtime => it should be selected in Config.in. > > (2) It's needed at build-time => it should be selected in Config.in > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd > like to see a serious justification, because it is really uncommon to > have target Python packages be build-time dependencies. > I'm totally agree: gnuradio needs host-python-pybind. In fact pybind package is not really clear to me: - there is no host-python-pybind - python-pybind is used to populate staging (PYTHON_PYBIND_INSTALL_STAGING = YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET = NO) If I remember well (but unable to find thread) one of previous bump has required a long discussion with as result this status: maybe guillaume (in CC) could help to clarify situation. > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com Regards, Gwenhael From thomas.petazzoni at bootlin.com Thu Oct 6 20:13:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:13:36 +0200 Subject: [Buildroot] [git commit] package/python-remi: add license file and license hash Message-ID: <20221006201401.8E22D86ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66d29ddf531059aa0ae9e1f2c528e905d3f7168b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since the release 2021.3.2, a LICENSE file is shipped with the archive from pypi.org. Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Thomas Petazzoni --- package/python-remi/python-remi.hash | 2 ++ package/python-remi/python-remi.mk | 1 + 2 files changed, 3 insertions(+) diff --git a/package/python-remi/python-remi.hash b/package/python-remi/python-remi.hash index 82234bbe98..e7937c3914 100644 --- a/package/python-remi/python-remi.hash +++ b/package/python-remi/python-remi.hash @@ -1,2 +1,4 @@ # sha256 from https://pypi.org/pypi/remi/json sha256 542df88e174bbd58fe763c49e5c2116f2c8413c1a934731069ed8c17bb9cd64c remi-2022.7.27.tar.gz +# Locally computed sha256 +sha256 3df7d3ad8904d7e99fc0810366483a7cbe5a43c13f7f913f1d7e5023f2ff7657 LICENSE diff --git a/package/python-remi/python-remi.mk b/package/python-remi/python-remi.mk index 7e43c09b00..419a3441a7 100644 --- a/package/python-remi/python-remi.mk +++ b/package/python-remi/python-remi.mk @@ -9,6 +9,7 @@ PYTHON_REMI_SOURCE = remi-$(PYTHON_REMI_VERSION).tar.gz PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/b7/5c/fca9d9273fc9d5f4ca0bc2f387ca19f8ba9979dcb75617d094e575dc2337 PYTHON_REMI_LICENSE = Apache-2.0 +PYTHON_REMI_LICENSE_FILES = LICENSE PYTHON_REMI_SETUP_TYPE = setuptools $(eval $(python-package)) From thomas.petazzoni at bootlin.com Thu Oct 6 20:14:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:14:04 +0200 Subject: [Buildroot] [PATCH] package/python-remi: add license file and license hash In-Reply-To: <1664784963-61534-1-git-send-email-gwenj@trabucayre.com> References: <1664784963-61534-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221006221404.376031b4@windsurf> On Mon, 3 Oct 2022 10:16:03 +0200 Gwenhael Goavec-Merou wrote: > From: Gwenhael Goavec-Merou > > Since the release 2021.3.2, a LICENSE file is shipped with the archive from > pypi.org. > > Signed-off-by: Gwenhael Goavec-Merou > --- > package/python-remi/python-remi.hash | 2 ++ > package/python-remi/python-remi.mk | 1 + > 2 files changed, 3 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From giulio.benetti at benettiengineering.com Thu Oct 6 20:14:19 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 6 Oct 2022 22:14:19 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> Message-ID: Hi Wolgang, thanks for contributing! Something to deal with. Before 'git send-email...' do you use buildroot/get-developers script? I ask this because I'm not in Cc but I maintain this package as well as other 2 people. Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: > UDisks2 provides an Library API [1] for accessing the UDisks2 service via > "libudisks2.so". For development of UDisks2 clients, install to staging > as well! This issue has been reported as bug [2] as well. It doesn't make sense that this has been reported as a bug since it's not a bug but an adding. So please remove last sentence. > [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] > [2] https://bugs.busybox.net/show_bug.cgi?id=15026 And this line ^^^ too. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > > Signed-off-by: Wolfgang Grandegger > --- > ?package/udisks/udisks.mk | 1 + > ?1 file changed, 1 insertion(+) > > diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk > index 2bf519a2cc..959333d01f 100644 > --- a/package/udisks/udisks.mk > +++ b/package/udisks/udisks.mk > @@ -10,6 +10,7 @@ UDISKS_SITE = > https://github.com/storaged-project/udisks/releases/download/udisk > ?UDISKS_LICENSE = GPL-2.0+ > ?UDISKS_LICENSE_FILES = COPYING > ?UDISKS_CPE_ID_VENDOR = freedesktop > +UDISKS_INSTALL_STAGING = YES > > ?UDISKS_DEPENDENCIES = \ > ???? host-pkgconf \ From thomas.petazzoni at bootlin.com Fri Oct 7 06:33:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 07 Oct 2022 06:33:22 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-06 Message-ID: <20221007063329.78144417BE@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-06 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 1 | 0 | 4 | 2022.05.x | 10 | 15 | 0 | 25 | 2022.08.x | 13 | 14 | 1 | 28 | master | 179 | 381 | 2 | 562 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 27 igd2-for-linux-2.1 | 22 systemd-250.4 | 22 host-sentry-cli-1.59.0 | 21 crun-1.5 | 17 libarchive-3.6.1 | 16 sysvinit-2.99 | 15 host-f2fs-tools-1.15.0 | 13 host-go-1.19.1 | 13 host-binutils-2.38 | 10 linux-5.17.15 | 10 autofs-5.1.8 | 9 elfutils-0.186 | 8 package/acpica/acpica.mk:40... | 7 gensio-2.5.5 | 6 libglib2-2.72.3 | 6 btrfs-progs-5.16.2 | 5 lxc-4.0.12 | 5 perl-5.34.1 | 5 frr-8.3.1 | 4 gobject-introspection-1.72.0 | 4 hdparm-9.63 | 4 host-gcc-final-11.3.0 | 4 toolchain-external-codescap... | 4 dash-0.5.11.5 | 3 gerbera-1.10.0 | 3 libgpg-error-1.45 | 3 unknown | 3 acpica-legal-info | 2 brltty-6.4 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 dieharder-3.31.1 | 2 dropbear-2022.82 | 2 efivar-37 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 gobject-introspection | 2 gsl-2.6 | 2 host-gdb-arc-2020.09-releas... | 2 host-pahole-73383b3a39afe86... | 2 kvmtool-f77d646ba01d04be5aa... | 2 libp11-0.4.12 | 2 linux-5.10.109-cip5-rt4 | 2 package/acpica/acpica.mk:41... | 2 ulog-0389d243352255f6182326... | 2 yajl-2.1.0 | 2 acpitool-0.5.1 | 1 afboot-stm32-3566acd582e553... | 1 augeas-1.12.0 | 1 bat-0.19.0 | 1 bayer2rgb-neon-15feb1115b48... | 1 bitcoin-0.21.2 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 containerd-1.6.8 | 1 dahdi-linux-5c840cf43838e06... | 1 ding-libs-0.6.2 | 1 dmalloc-5.6.5 | 1 docker-proxy-f6ccccb1c082a4... | 1 e2fsprogs-1.46.5 | 1 edk2-edk2-stable202102 | 1 fftw-quad-3.3.8 | 1 file-5.41 | 1 flare-engine-1.12 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gocryptfs-2.2.1 | 1 google-breakpad-c85eb4a59b6... | 1 grep-3.7 | 1 grpc-1.49.1 | 1 host-binutils-2.39 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-10.4.0 | 1 host-runc-1.1.4 | 1 host-rust-1.64.0 | 1 igh-ethercat-1.5.2 | 1 jemalloc-5.3.0 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgeos-3.11.0 | 1 libmdbx-0.11.11 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 libsepol-3.3 | 1 linux-5.10.115-cip7 | 1 linux-5.10.145-cip17-rt7 | 1 linux-tools | 1 lpc32xxcdl-2.11 | 1 lshw-d76afbaaf40e953243da92... | 1 ltp-testsuite-20220930 | 1 lzo-2.10 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mender-3.3.0 | 1 mosquitto-2.0.15 | 1 mtd-2.1.3 | 1 mxs-bootlets-10.12.01 | 1 ndisc6-1.0.5 | 1 ocf-linux-20120127 | 1 openssh-9.0p1 | 1 openvmtools-11.3.5-18557794 | 1 perl-net-ssleay-1.85 | 1 php-8.1.9 | 1 procps-ng-3.3.17 | 1 python-numpy-1.21.2 | 1 qt5base-2ffb7ad8a1079a0444b... | 1 qt6base-6.3.2 | 1 sdl-1.2.15 | 1 skalibs-2.10.0.3 | 1 tcf-agent-1.7.0 | 1 tealdeer-1.5.0 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 wavemon-0.9.4 | 1 wtfutil-0.41.0 | 1 x264-baee400fa9ced6f5481a72... | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/bfaf1f3838a7ae2c572a02155f68a6dd1c07196c | mips64el | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/012c3c8f509b71c830366e31cb42bfedaabfd5e1 | mips64 | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/9a41cab40b211a3c6b554b71189b220eb6010e47 | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/ce93876f18030fc1d2337349e363f7b1905002ab | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/4b18e749216bc6308b6266caa33ce3e2e2ca8f15 | ORPH sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1cf0418e02f44e0b8e1f2fa3ffd452f0c12cfd4e | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4422d55fe870517a7b7d39c50d29890b8970591a | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9ed6db3ce3a87666a42c8b5cb86ee24f8dfa5ac5 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8abe03cc0c154e2fc5e883be35bebd852164b190 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e15e391668fd05e8b41a30b4bcbd6dab4ea6c26a | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/33b9433c918e77d2cfd28eee6b4ba91ad9e3c705 | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e198441f70ac759dde3a6eba3a5cc043731c71a5 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8db57f3efc0594718ff80aa42fd5bae5897d9c58 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/682e234b091a5d9f35b24125dbe6881e63c6eec8 | mips | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/be801748f3b81ca4e61fe52e0c149f70af7dcba8 | aarch64 | bayer2rgb-neon-15feb1115b48... | NOK | http://autobuild.buildroot.net/results/8f081876931a29b72720b3326ff07b5041792145 | microblazeel | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/113b12c5e82d91ca3c9d6512ae5f32e29f021e2f | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/295a169821997c7bf2666a432b13e048db2847d9 | powerpc64le | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/02109ec6ffbbc60823e7e5ed01fa514d5aa1da71 | ORPH mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/129caaf40c913a15f1dcb64ff25d41ea32c0816a | powerpc | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/2d91a9ae678a21f0c2a0e7040af3d151fef465a6 | microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cdc7eca962956805fb07544a58a02d36d435ac73 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd9b0460e7cb2bbf12b17908a1be586561aa7f23 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/3edab9d49ab0496716cf88ee2674b364ea666f50 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a635158433a174b2bbd1d0d8f30175104a1441e5 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0f3da0e37bc365a8bd302739a51829ce4d1b6e3e | ORPH i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5b69dc6ee12ae34f63db0689bffbfaef2c4e9032 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/87f13b3dd7999c4ff504409443ae36f7c159905e | powerpc64le | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/9c25cf1e85e87338da40f7b9234dfcc81f8c30e6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5ea8a1076e3bae9f3b26f9c6e5d62603bd063136 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/291be26b79c15f28a9e738bc3e9422c1a6c19bf9 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0699db007766e409f1401ce57e9785b8c5b1971 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5d05b2c884ce2b16a71284510251d32500193506 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c60893f4ca18a5d36e8103ef64392688c3b82be | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bb5fa6d5919f4e056b05b776f62286d4bed57619 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/55107d76cbb6f2ebdf7f4d82cd7768f98f549014 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/061b3e9ff2776dd639063c62ea11641f2c6fb0d1 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/75247fdeb61f37ce145e29e1edbe6a6a4ad5c00c | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/57a8549eca11de84c6028021d907ab8942da501c | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/950cf9a88b939859337fa75b139ad7afd675c364 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fd8c348a5d75ddd3072669cd01cbdc452bb3e2cf | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/94990c50f2f9d8237ec12bfa954f40eb3e349c9d | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7cdcfd61c77eafb49fc84ca720a533ab524f3f10 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05863675d545fb8fc0340e01e1d1653acb6facde | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d7de16ae5970b81374a4b658da8bb0271598d4b1 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6daa408df6beb586cf19316c463f2c8fba138d95 | arc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/0f084133619709b8220e46bc5364cc465b2bb98e | sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f63ad068952eca53cf0da7d1c6d0f784ce8f4f49 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/ad7a562abeb6946ca1bd74b86e7b4dbb35cfbd04 | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bc582e6eb6741a5c5bafd10a23c9953f25a8916e | ORPH microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/f037ad3945e41a4ad93cfb647fb3578f554cc96a | microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/17fddde63589db9d7cb467c504c6a40cb37543bf | arceb | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/dad204ab9357406b284cd53ab410a48199e787cf | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/77c2b2eb11f6e317f8c626dd844f419406c3680b | ORPH x86_64 | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/fd3d722a661b76cbec94d884440680fe09257f1e | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/25aace9ebf60a0c9087f137fcb1cf0f1c27129e5 | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/c3970e0fdb1c25c6519bb27c823c401b8e8b0c23 | or1k | e2fsprogs-1.46.5 | NOK | http://autobuild.buildroot.net/results/1fbfa7c07fe71bd6dcf29e4a726e774dc2071272 | ORPH i686 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/3b87af804c7aa66bf955c51ba1468cdc360d54ad | mips64el | efivar-37 | NOK | http://autobuild.buildroot.net/results/efc147212b08495f86aa8210f21278d661c008f4 | aarch64 | efivar-37 | NOK | http://autobuild.buildroot.net/results/7bef90817702e80f278394bf683c95e57475d7d6 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/061005b94d5d44299bd970d4b9037b478f49402e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/392e0a362105534a9ad1f6786ce12268e854e93e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/66729456c555f8119f5ebd36d12c8fd3d7eccff7 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6c3387c9216b0d8b9850bdf280ff077a0dd4e321 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fe79f88438d5b2f3f370d63af78fbd132c052136 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2b8088f8b9fe70ca7f8cffc21bfa654215d9822a | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/d8f6a0919142144a11bfb1143ac0f6c2d7043bad | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/1249756fb164b05d55fab700e6fc21858254ca87 | ORPH powerpc64 | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/de6631a3ef18a010217f489c5a7af8a7060396c0 | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/7be7d3a62b413eb0039b99f33e259ad4e908af24 | ORPH mips64 | flare-engine-1.12 | NOK | http://autobuild.buildroot.net/results/367686c5524708657e6711230ad0a4a2210d4a29 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/cf10d3934a3e7e557f83cbe7e3637abaf0cf413e | ORPH microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/f98fee83a9f9e1e9553036bed92d391c3afa5da6 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/c0b390b66776ab37a9eaebd5940ff8182631c8f5 | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/77ca91268bbb4e03faf4b1e58749edf64120c18c | arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/cf4a2b87004476f0f2bea05ca87c8253f2693233 | arceb | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/40213e526976a1febb64db8613b0f4d6ed031a25 | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/6cea99ec0153c425d2d840ae2a7d54e38d2e2105 | arm | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/5460241191798fccf876c2961345901ec3a53791 | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/d6b354ce5a6f9af13b95ed36b7efecc3822249ad | i586 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/210c2732131f63e4d9edcefadf89ed35a93012da | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fc3e072fa8fad694cc6006bd5ecc952b19aaf7be | xtensa | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/7b8f9d5c9de85a8fb90100267077ce499f1d0b4d | i686 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/cbedddc2147c0e4cd1243cb36ae9fbe706503254 | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/2c02b8f06eb45c315711c03c364bae0464a27993 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e7f1eb992fc9461f338b3ee9e4144ee083c99ca4 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/43f6b232cf5e3cf479b8bc83919b85ae460f3e35 | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/c0c11fc6409fd602b5f48491ececbaa8d7090316 | s390x | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a09e901365dc3affc69e57afbb202c058c288010 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d162b4586c76383eab2b7b5ba6b01993ac39daaa | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/861097e395bc6c36d1727560161bc33eca795e1b | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/da921a379427c3e2713e32881c32fe20964a6772 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b58dbc39b54985d4e9facdacb2d6aabc0019fe84 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2aa800295da24da65ded5d2fb4a4dd4d8f80b0 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8fbd019e1f7c4f12eda24ed886963514e86a350 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc824716d0a5ca70dca49865201bd9c01196acf3 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92f5f1436cf6d188d6b599a7b6983018d2fe517e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8de9fc43ee33658b5af91817925fc700259812d5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/790b699e704d03382d0fcacbf8d35e61384a24ea | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7d472691e7126ce523304f4b647c6fb79cb8ea9 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e52b0159e001585e76540515363fd31b00789021 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f232b398519c6e8a79b316efc1c8af88fc762b7f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/859799663c9fdc903590fd02031efdda6e50f100 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfd13a675eefc32ec799b6cd6a90e07df8dc4518 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1fe26adeb67bb9bcaf3553434a688e3461262ae | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/090b3febb43aa49644960920078010acf2191b3f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0f0c6b689e1b32818a1f4a70227b45e3b8d67f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a779bf694f31b4e7ee0a9a93881cd1b22f42a2b6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0eca37fc9594e7cc7e60ad7766e034b472f1fab6 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2713e3144daaf35de742e44cb45170d9096e36a7 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b40cecaeaf270eb7475470e7dac5c9f359417ce8 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a420d38fb14c61268b32f9a44eed3bcf07efb5c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/643c134f89bdea046d70d2d126d92265f7bb6570 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2aac745b4cdd4ed3699cba42cf08d3e86dc5b667 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b169c1af5428af3b38e2e89042fcdb45d03e3ed6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/917f33b0e6cde2a5b96fd3aa96704aa356fe924f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fd9c763558da852819159b0fab8653643ee66b9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/762cdb2231fd9b56b64fdf3d6d12b2a43f3da6fc | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/997cd7fd5ce1b968c7ffb3f3c56d71ec421d652a | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/90c49b8a0636cbbadea25a00d55b0d29a939fd01 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/790d9be7d0225f9a907bd16f63e56e29161b3802 | microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/b8b5a1e55116cfee6e84973721650241cb41d24f | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/70b2ed988bd83789da6359688f08713588faaf34 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/edc97ebd8b207e576ff78766516e17d36c7cdd19 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5836effc5b63e52da2ac67f62e3ae0dddb0a96fe | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/d41eb416660dc61ba8d80aae03f648775264b8da | ORPH i686 | gocryptfs-2.2.1 | NOK | http://autobuild.buildroot.net/results/53039497768789f9a142a3853acfb0bbdc84d67f | i686 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/78737d3c66ab05a2a80398c6b675e339d0a7408c | powerpc | grep-3.7 | NOK | http://autobuild.buildroot.net/results/3c381aa2a615d25343089ddd541f0b8227cc5695 | mips | grpc-1.49.1 | NOK | http://autobuild.buildroot.net/results/4cd084803cdf2b6470b15e34708094308250d857 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/63edaa4524fa30d8dad3beeb0518a47999436d3f | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/93bb95f1221af615563675be46b681b325a6d721 | ORPH s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/00550524dc9c85054a32cd5a52a54d746d6c9288 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/733a67f3f749771d687e598f117d29a5fc491d77 | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/48c5dcda9a02f2ad7a2ba34386441dde3fbdf4f8 | or1k | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/6528b8b59ea9e3a9785a143fa10e3b6d3a238730 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9e09150d5baa835ec18ef69b21f1d351c0ffdbb8 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b99d4b8467309c3449028a6aed3b8f661f1ac3ef | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a0b395176f76aa6f62648db02e8990d5a6191228 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a9c9f323ce8e2d1245f09d7c79f9ad940163ff0 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/22cd0559da19ff9ace77b4519405ea00d8a292d2 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/acd5f21c70874528738a54552dab06c1baf8450a | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/77987a06658f760e649a676ef57d09d5b41af213 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/29c9722fb92ce084c2f3fa2a6586eb66a90f0763 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fe75be51650d373a32cb0f5c661abec9fa926a74 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/dffe808722602f99cabf84ee9a128acf3dec33db | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/0c7594b382656519c90ca93044cfa49344e41979 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5e5ad45a330de2d58093b809ba0f7f543797af4c | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6f2ca63f4a92f63ddd75584b047e19fa6393bbc1 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/584e36561f64870b6a982e49e5069c207a96c773 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b77ee3baad939d88542f5fbb68c1aa4c59d48043 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ba0e8be5e1f5583faaab2c003be8cb5b37a11d04 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e1fa1e0bb91a0d84859888bcfe3252e60c46d519 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/758f1542331df4e47aff2d8b0b54b9f43899df3d | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19ff25a325564acaeaacb333af91f881b394e757 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2f3e9815f9ee6f4005656b62ca471ed41f0a5a5d | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/175dc19dd44c9419343bb356ba68b7c86da15e4e | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/407723771ec44b2429841ade8bb0f4368415c2b5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/25cd15c62710e01d39da8092f27b7217b1dff8a5 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9ce59a6d1daa08d309c3a231d0e081c21a1f9ef2 | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/898ddab7d69180bb35b019446508e807681499ce | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/edef72c79de37407167f6d04ef01383693476779 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/422ecdf1fb0e7c70c45ad6fed3000b4f5210d7fb | armeb | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/c332b8f815ec46860d34765f3fe2a2eccd6cffd2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d8d8ded19497984dfe776ecc1ff125c5ffae0183 | arc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/6f10e342881b4a11ac3a462eb79ea58de5e06865 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/b9a581cf2c5177e445a3f13b37f1a2f15dcfcdde | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/a5e6a7ee211ea1b3c46f659504959624c941e5ed | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e511041b80921ff733079413efaff30be4bc2d9d | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bbefb0aa6594614f8ddd1728de7ae5d1e8137a64 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7692411f77132c140678c45da71cad6b40180de5 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/113be27680b587fe6750328abb8797d118846ff5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0b7c3530097e41edb995775d54087c8d5494cfb9 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/117a6a721e00bc32942b5bcb10653ceea6ea5ab6 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/67c8e472bcecaaf3ca4fc15ff0824e06d9885198 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f3ad2f1b0d9a6f0648c86dfd8f71a206a349374c | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9206ea5c9ce4a4cad907dde671a581156f86c584 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0fec719ec8b283da2bbd1134701bcb502c1bddd1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3473a56ef4fba1b0f4be9a08581f9e7cb5b3d054 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1c2af3eda3537c6f674e76d2f6cb31c876603543 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/56ba71f7e7bc4b294997db712081c2522695e834 | i486 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7e15e65ac4dff2b8f59bb715b17db8c2b4cf138a | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2a86dce7741d28fda6956652bdbf0ec105b8a9f3 | arm | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/e38bcf4dd2bbb4234d78ae4f8a158d89358ea753 | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6a09d5dac9291b5218db7c1bb63e94b342c7e427 | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/226b8e8e6c28312851fa19bfd0d4aeadce1fe368 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4157cb724b48f420e52cfc98fde52be59ed8d096 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/90840716914760b9bef6e70f02d0997f5fff8e4e | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bb52f69115f75c3f26ef2cbeeb05811fb5ebd927 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/553ab800b0f9c0e155a7e6dd445d217d3a9b2d8f | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3b247d7b6d093b45168613eb40b0c3fc26e8f02 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e6424097dfd79b3b72552ae0709aa255cad82653 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c9a1d41b5e151687b5d6579b7b991f31ae095aba | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5db0c228495b12e243ef17662e21739ea4a7d2c3 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/65671334f9d98871a58bf136d5c9fc08aa4fb034 | sh4a | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e1cf5883ae7247788cb5d0d7fd8d5f3215d44df6 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/105a313796c8226c84ac2942822abd0513c84ca3 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fee3501165d11b58c86dab56c7da63dada842bf8 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/98a3ea40f58b6c300a831a9d46ccbd794b60eaac | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0cf7d6bace2431d416980040541b2f7d08239c43 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d650af6285e2a5b9234a3efd0b00f7396dfd3cf | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/61e79327e461e9b1bd86e9147d4fbf63f56ed718 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e95fa301631aa497b17c4d442b9432b2b0249568 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a9aa72b5d4ef9adf784a07451c510808f71d112e | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/048a95dd5c053270b81282ef1881c641a16ccfdb | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c6e5c309096a89654d8dd3f3626729260f3d384 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9beaaf3990be017255ba33a0f511c20c3bb9c9fd | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bcbc4b19744f26316a421701c2b6c097c7447f5 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2bee3e57965bd3b6dcf948512f170d411cc4c0b1 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a808bbf2f7df69b3e760d9e019cf068bff88a45f | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f9c7f84f53bdb7aa19b5b4f51f3eaf35939d57ce | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/34d8ecc798686544ccb7c7d8b1a0b5757cea30ea | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6c8115a9956aaa7a1a955a9b3f8b3f0c4801d917 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1e33e4c1c447dfda3b9fdc1ede39f182d7578bbb | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8a586057e9e23e7be16450797ab06aa30c8484dc | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9a35728af9e17686813e2fe5465202159c104b2a | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fcc28f05f1850f1c0b83e4799736679f6b46da0c | powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1402ab85a5dbd5c73ccaf22e5456e71719e401ac | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d227c39d66a33d16529d5ebef8838fbfb0ea7f | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7b05d76a715f111d3919874cbde99affef4db772 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b4b10e1cc120d1669890be52f6dd91b966380097 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bb9a280e756c4c356f93f0507d7de22f70c6f22 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dda95b3d0ef32795fa834d21d3cc52923d23e384 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/80581c9621adc2e2f3c52190e1429b9e95429991 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/daca821110ba55797a904d037df31db03adadde4 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9aac03c94b2ba7063e1f2fbd67d169b236a11370 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/01878f7fc0c016b719c5caee5d62e6e2f422cd45 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0280a7ede9c2ee624dd400d723680362bfeca659 | sparc | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/d80aaf72d1e75f2ca94dbaf7df4acf4892d2eb43 | sh4a | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/d3e60918726803351e2d1042e3f1acb122e18a92 | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/307b34df86ae28eabd000c1a9f5eac94f0761c26 | i686 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/ce72325cb1901d712ea11d6406a314ddc722de05 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/75563649280e90811d34bbb147241292f62a018f | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2c4aa106947741da681f73475c1ea5420edb888d | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2093918db19ce5c32d3b8b87353b28000aa07b52 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1caa7e45f2c3c7dcfaf841bf7e77d9d4448634eb | i686 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/56e3c1a102369693b0e4874653276400e581aa13 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/46a52bfaddc57df37d5726b439a11cd28f64677b | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/095bc31a3629e1c4b5ce1fb9e7f2f2fa69cb82d8 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1e8daecd24a0690fa37cd73840a5299325338dfa | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b6e3115c9d250c72fd6353cf4bf5a96643c1a9d9 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/de8e2a1612e851155f6c9f418529b3dfb0947265 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5c24b014e434a666ee7fb66ef10f6ce93bd5fea3 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a430e2a74458c638cf7671da33fa8b0f48ceade1 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1e81e274b29c675c41bef5500d0e7a19326d6700 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/af7444cefafc9c7f060709e065ec485aa7ea2f43 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aea7f9bc4a505eff78938446e48e0334a36595d2 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/90dccd352d865dfdf1b9b8ea2aeb734d6677d602 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6b48495df83e51454b0164bc0909f9526ae344ee | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/8adf9cf9c2ad970a968f674e40a7df30d8d538b7 | ORPH or1k | libgeos-3.11.0 | NOK | http://autobuild.buildroot.net/results/596852ad9c7c0376707184ad501fd8e3c51c3fd3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/69ab85d1acea51852543458cbb638a787612f44f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b97dba24b34c3e077a64ba2f8bdfeb4c122f67b3 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b529717f62f405b51de8100b7a5642a00d4a3261 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e827ff7a96b1b1fad8fca7d05b61bf1d195c878c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f834e6b8dbec8b7b062f863a9be9b6789f930d16 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9e373c251650e9f0906e6962ee0d59c62d918aa9 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/53223e787c99e2b61d809c03037fd8414cca6b3d | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/66a002853d3fbb9c04f4ab60d156dbf8cb0d84cc | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f35741f19022d5baf0c97cab4fc73d9832457f84 | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/17219033c5dda2d63f2078f7eed4dd84d29c82d3 | nios2 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/409de62450d59e523ee591bb9ffda31dae28e7dc | sparc | libp11-0.4.12 | NOK | http://autobuild.buildroot.net/results/c35e0f01651a0970f923cb9408a6e64a2b8b0610 | ORPH arc | libp11-0.4.12 | NOK | http://autobuild.buildroot.net/results/e16d6da2f70b306baa289062f266ee41ddfeafa0 | ORPH riscv64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/27bdcdbedfe12ea5386a1d2740687af340c6fd57 | mips64 | libsepol-3.3 | NOK | http://autobuild.buildroot.net/results/75f3e57025e11e93bf99bc548846307b545d0054 | microblaze | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/6dfe573de5c42abe1ad5ba5cd1e9107a0c2d437e | ORPH microblaze | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/7e642a8cc703f8a61f19b82b4c9a0bd985feab50 | ORPH armeb | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/7559f3fcb316808e146bb4bf639df74ebe29288b | ORPH arc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/9c87471758d7fe71be305a91cf599cf1f28898ca | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/f7945eee71d0e6004bfaadc722a04d18b034e3e4 | ORPH mips64 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/46bfa768268a1fa69803e0e322a89b4a75187512 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/931af925a916a11a6b45d43c362bdf916724318d | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/bdb2e684b3460840fc0227e4032e1abd8ee2eb61 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/6fa51623e8b00b25dc98cf40be3586f51cec8e49 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9bcd33bcf3caa0e16e1895df3f85be7c8e236a2d | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/2589d27dce810cfa59f6446ce63c0b5ff8044e85 | ORPH arc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9df1a946bd32f7324d7922da721b60a052373b8e | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/571c050861045654c3b6db12dfba40ebf8a32264 | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/d446ef5edb2f31991384dc800002528fc498a09c | ORPH mipsel | linux-tools | NOK | http://autobuild.buildroot.net/results/56b2ad62bae7b90b1c68da1ad671b0fd8f08c0aa | ORPH armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/7e8f86eada15e7f191fc557e4be4de048a120dcd | ORPH arceb | lshw-d76afbaaf40e953243da92... | NOK | http://autobuild.buildroot.net/results/a4ac79a786fb12242c449b21ed7bcab353e9ca13 | ORPH x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/bdba3d1cf9e61cd6117b833a6f0e4c52822bc3d4 | s390x | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1e231c50de9d785a423b55c5fe3eaffcadb95e3a | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d4c95f0e0be6da6ea34e2248f116e53c8489a6e0 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9071f63b5bc1be5ad473b74383ff397448e2a411 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b60f7f5a2e7a3716a1389bbfef1f37076d9bc781 | i686 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1a56bc1a61891c2054498a04a2cf1c0174848575 | riscv64 | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/9c8add7ca5114a8fe89e3bdef91aacdf3176415b | ORPH aarch64_be | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/6749dd56808bed00e7f00ae18324517adc2f45f9 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/05433a63a4804e16340eb22c5b4ddc61fb430b7b | ORPH aarch64 | mender-3.3.0 | NOK | http://autobuild.buildroot.net/results/bf42c8a3cbc7b332047b9a79e4267f0e2885bf91 | or1k | mosquitto-2.0.15 | NOK | http://autobuild.buildroot.net/results/9be953d7b93bf9137b8ba223ec2242ca1152bf4a | sparc64 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/647abece6b60d53d71b6f9acd0ff2dd84b3128d9 | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/2cbe1423eaafa3b57b2a3e5131b6759c22ec01bc | ORPH arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/a810b1f2a1d5f37183eac6c57ebee6dacd6d7ce2 | ORPH armeb | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/ea74d4dbaaf1c1ce07e1e5f905ed490a12ff2c99 | ORPH sparc64 | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/2123f1c9123e4ed63f71de206c0945685c0fa00a | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/dcd4fce40a03edcfe981ec79e15972dfe5ea74b1 | m68k | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/e7a126e09d1b73a13bb066449df83a7d087bceee | arceb | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/6fe97716418ffd844958c58355115e70de31fa0d | mipsel | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/1ba8ea24aa3410a295264e2de28a7dd7d962e641 | arceb | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/d8b853e740c0533aa620d0004602367f8e345a81 | microblaze | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/408850c953fab13ebad0b75697599af442128921 | sparc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/db35f52e8af5abdec868082186a51250783a0b60 | mips64el | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/b74b5651472fe8d43acb3b775044de641234c18c | i486 | package/acpica/acpica.mk:41... | NOK | http://autobuild.buildroot.net/results/904b893bbb2b4ab85b4408e36cbebf2b6c666550 | aarch64 | package/acpica/acpica.mk:41... | NOK | http://autobuild.buildroot.net/results/b322981c4acdade1eb61f9d9656dacc7ca697f97 | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/49dd3e37a153f1b1fb9364e6f593e3701e712719 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/43120d54bd8ca00f31052e4e24ee001552be099a | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/55ac24e70415bb06615638e385b47312f094ce95 | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/115c897ba2d1196a30262a5ac55e2ee0143368f6 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e880521252190411294a75eac996c0793469299e | arceb | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/b74159d225f807e5cf6b41656b40f86b0a77efc5 | arm | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/279477414d20ffb78ff46c08d89474dc95092436 | aarch64_be | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/07f424b16006dd1bee89a559de71abb573e6ab03 | ORPH armeb | python-numpy-1.21.2 | NOK | http://autobuild.buildroot.net/results/97f4f7b4f3c82e708baf09043a0a328598e67114 | powerpc64le | qt5base-2ffb7ad8a1079a0444b... | NOK | http://autobuild.buildroot.net/results/d246fc79a7e48a86669ce55cb864de118d736d81 | powerpc64le | qt6base-6.3.2 | NOK | http://autobuild.buildroot.net/results/a9ad1945724d450f8522eddf31fb79de0a78e71c | sh4aeb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/bf612d5075f1fa9f19f32506c397533fd10858ec | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/7ec7b580a551bf3812ea3784cdea776324a451cc | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0990caab3e6bb3fbc9f711a39b632ea08d21d88e | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ef14c5f3f1101d07f7984573b92fbf3baea36047 | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/25b34ebaaa87603b8b4f62ea6a1df4fb6b11fc17 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2a01bf99baed20629758bcddd3c09d2cc6685e19 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8ee6ff908e9447baec0692d1a3eef8bef010887d | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f071e7f0cf954d4e237d8b5fb7e91768e653cee1 | arceb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/413baab86c327550bc8ac7e3c2cb4581fb61a58b | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9e40df29b51cac353abcc101ffb0fed15a8604d9 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16af8322cbb8bb1bb6317f630d6c0676f814782f | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9f65e71254c94446648d94a03c66e69c341e035c | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b131b51f2b2d0f7503a3413e54c88700bfd3967 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/291c3dda493f4a1fd67e1dc950fa336d5ec3bfaf | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c38f2f3271568538795cd80d904c52a02ec6917e | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5b66073d9c8be56b9ec20365a3b7e82756c4a416 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/fb413bf075812e093a9eb0da55052c6fc13ba0c1 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd649711c086a1d589839da2e0c7d5acac550e2e | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/414f02cab8ff85eeef0f0364409a0296bfd3b139 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7a266111e8e00ebfd9387dfed7e06dd212dfc8bb | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5e9c7178ba1a7b10e2f756d8c1e7d517b91456e3 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/088c2682f15bb8107b45e672e371b1092a512e44 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f92fa10544e8dd585a1612968fcfad8eae654620 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/75428639d411ddc3f0b2c1dedd425f96fb6c13e8 | armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d52d3dcbad556ec23de5ee16450c402c008b93e | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/938093570e8def9f757653f55551afae4b185fae | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01ac60d7b95ba9ee85cd2688c96002176218d847 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/535a8b2d215471fca8577362ae09d2f0f609c672 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7451d97ec154aff7ee21501551b70cbfbeeb4e9f | ORPH riscv64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/00535c083fd12adaea2420b6e2039bc16bdc7551 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/be1810b1186b0ac9cf8ce0f8e4674a4d2af18818 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/05645f2eaf1299b9c7d31d5ce6439e4a916e9106 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ee5aa81a5728f5e0b5c60c8fe8579a3e7344bb31 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7980787465e4e1c4b0710cc4f8aea4aeb28d9541 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b94fd15b097a0c7be5edbc5ce06ac4835cefb2f3 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f32bc2d2240d2268d4514c940aa2a5d4fd25db22 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ffcf5180565245ee50b4a90cb3cf71d9fee55d10 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a205e87534d7d6b6b9e15e48744971268183011a | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a915519b5fbb24190b0c1b444709d618529a32ee | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/9ae779e7d7a8c403e9f79d44a161aaec5b2125ef | powerpc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d4d5404b87e762c9fb8af274c0b9ac629d51875d | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/04f8d1f94aabc49e148125cd9d61074a87c94fd1 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b3a6892865051f8f39b2ab897a0818c3c463fd43 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/6aeb323fca80e05bf0392cadcc22b9c0cfa14f16 | ORPH mips64el | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/604501e99095139bc40553b8e9410424a4e9f45a | ORPH xtensa | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7f382507c4ec2b2b51991ecfdbde9a01689cc99f | s390x | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/846a113e9194ad71f6e90c3fba7c2ed5cec409b9 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/24328d4e78807fa26e0e047258aacd6fd6fb52cf | or1k | unknown | NOK | http://autobuild.buildroot.net/results/95d6fcad67e0475f05427803486b4e7cb1466f0f | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/6c012d7862308168f00fdf00f966059627aa57d3 | i686 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/93badc1b50fd20e2c916cdcfc495b662215fe9a9 | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/04ad2a0e2734866bb5399543a0801645f983336a | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/e17bb5e205963c61ee129104f7a1785f7303e363 | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/8e35d3294a43b9de365f03efbea25dcaeb6bf13b | ORPH powerpc64le | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/5964284a39c62c2de6bb836d167751c5ff8f8535 | i486 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/fde6f68ebc152dce01479ecbfbbf7698fb061b60 | riscv64 | yajl-2.1.0 | NOK | http://autobuild.buildroot.net/results/f809986ff92b0fe84e697bb41d327f4bc2ef2112 | ORPH riscv64 | yajl-2.1.0 | NOK | http://autobuild.buildroot.net/results/82ac95352c1b01b7effa153dbcdaa88668457db9 | ORPH nios2 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/da86dbd0b2ebd6cb748f9ae2e4fcefa63edf51a1 | sparc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/bd6da2d4125e3cb13ff4520581e42178112ca7cb | riscv64 | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/0138021ad813213f904997afbd94cdd04b7a05d0 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/efa7d378f0721cf6d717ada9176729e8293986bd | Classification of failures by reason for 2022.02.x -------------------------------------------------- exempi-2.6.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/64d69fa1ffe0afc959045ac52202784153b20b3c | Classification of failures by reason for 2022.05.x -------------------------------------------------- unknown | 3 igd2-for-linux-2.1 | 2 pixman-0.40.0 | 2 /home/buildroot/autobuild/i... | 1 dahdi-linux-5c840cf43838e06... | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-gcc-final-9.4.0 | 1 host-pahole-73383b3a39afe86... | 1 libcamera-8a845ab078c3fe12a... | 1 libglib2-2.70.4 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/176838b6c7a74f2d82d14679499bba8eb37268cd | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/7b8dfe4c45c669689f8d422029b6449e3b8cdbc8 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/239736e92d7ed97a4fd058c28985b38cef0e9a11 | arm | host-gcc-final-9.4.0 | NOK | http://autobuild.buildroot.net/results/526545e32c0b2ad30a75d9495f8698d0bf2f097e | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d9eb4446ae5c9c6b425bc3ef15de746f3f0469b6 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/03ef95066476e821a7c416f8962716da7c29bdf3 | powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d6bd1fdbc311658f05e1b37a1cac0249c93acecb | riscv32 | libcamera-8a845ab078c3fe12a... | NOK | http://autobuild.buildroot.net/results/03f4dd4771e8f3c7b54f202b06f987578bf13167 | arc | libglib2-2.70.4 | NOK | http://autobuild.buildroot.net/results/9bf17c48561d4f10d42c30d7f2416798b26eeea3 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/5a82f6ccf1e04a98e3a12949344010bbd9fe9166 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/534d530fd8e19a759435584dfcaf42c1e4e7812c | or1k | unknown | NOK | http://autobuild.buildroot.net/results/e35440bcde84f817bd603ee1d2660768301729ab | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/11a603310146f4b808f1f52d700c0b1f4dc98461 | arc | unknown | NOK | http://autobuild.buildroot.net/results/3e5ad95e43a9fa2e24d9423e8f08ad97443356f1 | or1k | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/661495d8b934de39cf720b326ff8ba29e3f933e6 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- containerd-1.6.6 | 2 frr-8.2.2 | 2 igd2-for-linux-2.1 | 2 gummiboot-2bcd919c681c952eb... | 1 host-gcc-initial-11.3.0 | 1 host-moby-buildkit-0.10.0 | 1 host-pahole-73383b3a39afe86... | 1 libcap-ng-0.8.3 | 1 libgcrypt | 1 libglib2-2.72.3 | 1 libnss-3.81 | 1 ltp-testsuite-20220527 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/fec6412855d83d27c53de805449554f409c80799 | powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/0d6cafac0b8490955d02dcbe7f90d1e2a47a6a91 | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/b591be03f6aa34e90310b990e6a822292f22ede4 | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/3e3b2336366bec5c22f58bf8e236cd37bf2a0e61 | i686 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/f28c5d009fbbcdd341b5912e53dd686349a7264a | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f5adbd313b03c389e1be27ae23ca77d1abe652e2 | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/6fae4e9d2e8240c7621242f44aced404112f384b | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c7a4a4a38c1b8c4a19acbbee6c0124b206ad3708 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6637c5537f7927e1c6c992ccf57ca8077065a463 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2b6325cabf73e08f111a1829809ace268473ed92 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/004e3b056d027f670059bb775fbbfc816129ceac | arm | libgcrypt | TIM | http://autobuild.buildroot.net/results/7faae7c72d93b7c5de5f8dd585e403f9bb85805a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/638535d964a3e4bca206921a3514c55aca12f49e | powerpc64le | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/feb72930545280fe4fe038cb8f6cd3e27f79710d | x86_64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/3695a2396165392ec17343ce36c30c3084a0d12d | -- http://autobuild.buildroot.net From nunes.erico at gmail.com Fri Oct 7 06:46:10 2022 From: nunes.erico at gmail.com (Erico Nunes) Date: Fri, 7 Oct 2022 08:46:10 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: <20221006221236.7dd6580a@windsurf> References: <20221004143943.1456694-1-nunes.erico@gmail.com> <20221006221236.7dd6580a@windsurf> Message-ID: On Thu, Oct 6, 2022 at 10:12 PM Thomas Petazzoni wrote: > > On Tue, 4 Oct 2022 16:39:42 +0200 > Erico Nunes wrote: > > > Drop backported patches and rebase the ones that are still relevant. > > > > From version 37 to 38, there is a new build system in place, which is > > still custom Makefiles. > > This introduces a host-efivar package to account for the 'makeguids' > > tool. Previously it was not too cumbersome to work around building that > > tool for the host, but with the new build system it is increasingly > > coupled with the target build that the least hacky way to work around it > > is with a host package and a Makefile patch. > > > > Signed-off-by: Erico Nunes > > I've applied both, but I'm not super fan of the Buildroot-specific > patch in efivar to not build makeguids. Would it be possible to work > with the upstream efivar community to find a suitable solution to this > issue? Thanks. I did check for related work in upstream and there are two relevant reports: https://github.com/rhboot/efivar/issues/130 reports the makeguids issue in cross compilation. There is no solution proposal for it in its current state though. One potential solution is to change the build to something less custom, like meson, then in https://github.com/rhboot/efivar/pull/216 there is a draft pull request to actually move it to meson. Assuming that gets in for the next efivar release, the Buildroot specific patch could be dropped by then. I think what I can do at this point is test that locally to see if it addresses the major problem that we have with Buildroot for a future version bump and provide some feedback there. Erico From wg at grandegger.com Fri Oct 7 07:27:37 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 09:27:37 +0200 Subject: [Buildroot] [PATCH v2] package/udisks: install to staging Message-ID: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> UDisks2 provides a Library API [1] for accessing the UDisks2 service via "libudisks2.so". For development of UDisks2 clients, install to staging as well! [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html Signed-off-by: Wolfgang Grandegger --- -Changes since v1: Remove note about the reported bug and add authors listed by "utils/get-developers". package/udisks/udisks.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk index 2bf519a2cc..959333d01f 100644 --- a/package/udisks/udisks.mk +++ b/package/udisks/udisks.mk @@ -10,6 +10,7 @@ UDISKS_SITE = https://github.com/storaged-project/udisks/releases/download/udisk UDISKS_LICENSE = GPL-2.0+ UDISKS_LICENSE_FILES = COPYING UDISKS_CPE_ID_VENDOR = freedesktop +UDISKS_INSTALL_STAGING = YES UDISKS_DEPENDENCIES = \ host-pkgconf \ -- 2.30.2 From wg at grandegger.com Fri Oct 7 07:35:48 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 09:35:48 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> Message-ID: <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> Hello Giulio, I send trivial patches directly via email. Without "git send-email..." and I also didn't use "buildroot/get-developers". I just sent v2, hope it's fine now!? From my point of few it's a bug... but well, it doesn't really matter. Wolfgang On 06.10.22 22:14, Giulio Benetti wrote: > Hi Wolgang, > > thanks for contributing! > > Something to deal with. > Before 'git send-email...' do you use buildroot/get-developers script? > > I ask this because I'm not in Cc but I maintain this package as well as > other 2 people. > > Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: >> UDisks2 provides an Library API [1] for accessing the UDisks2 service >> via >> "libudisks2.so". For development of UDisks2 clients, install to staging >> as well! This issue has been reported as bug [2] as well. > > It doesn't make sense that this has been reported as a bug since it's > not a bug but an adding. So please remove last sentence. > >> [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] >> [2] https://bugs.busybox.net/show_bug.cgi?id=15026 > > And this line ^^^ too. > > Best regards From quentin.schulz at theobroma-systems.com Fri Oct 7 08:10:45 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Fri, 7 Oct 2022 10:10:45 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <9cd26511-ec08-cd3c-3083-cd6bb58e483d@theobroma-systems.com> Hi Victor, Please pass -v 2 to git format-patch so that the title of the mail is [PATCH v2] otherwise it gets difficult to know which version is the last one :) On 10/6/22 17:52, Victor Dumas wrote: > Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. > On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine > > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- > 1 file changed, 36 insertions(+), 26 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..c9d40e1cce 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + echo "patch file $file" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -125,32 +159,8 @@ main() { > > find_args+=( "-type" "f" "-print" ) > > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + export -f patch_file > + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} > -0 and -d '\n' are both changing the delimiter, I assume this actually does not work because -d '\n' will be parsed last (and thus used). Actually, I think my suggestion of find "${rootdir}" ${find_args[@]} -print0 is not good either (though probably working since -print0 will be parsed after -print), we should modify find_args above the git context here to use -print0 instead of -print. Cheers, Quentin From sebastien.szymanski at armadeus.com Fri Oct 7 09:23:00 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Fri, 7 Oct 2022 11:23:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/rt-tests: bump version to 2.4 Message-ID: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/rt-tests/rt-tests.hash | 2 +- package/rt-tests/rt-tests.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rt-tests/rt-tests.hash b/package/rt-tests/rt-tests.hash index 3adda60f42..49df8313f9 100644 --- a/package/rt-tests/rt-tests.hash +++ b/package/rt-tests/rt-tests.hash @@ -1,4 +1,4 @@ # From https://mirrors.edge.kernel.org/pub/linux/utils/rt-tests/sha256sums.asc -sha256 b5e7959bcb5c703b2743030751af975ea4e04962e29fc1118f4b605987585735 rt-tests-2.3.tar.xz +sha256 393457f0c91cce57e82b876ecb9b672871f898e6cecafc751548079512bcc808 rt-tests-2.4.tar.xz # locally computed hash sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/rt-tests/rt-tests.mk b/package/rt-tests/rt-tests.mk index 056a4a6723..74290211ce 100644 --- a/package/rt-tests/rt-tests.mk +++ b/package/rt-tests/rt-tests.mk @@ -6,7 +6,7 @@ RT_TESTS_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/rt-tests RT_TESTS_SOURCE = rt-tests-$(RT_TESTS_VERSION).tar.xz -RT_TESTS_VERSION = 2.3 +RT_TESTS_VERSION = 2.4 RT_TESTS_LICENSE = GPL-2.0+ RT_TESTS_LICENSE_FILES = COPYING -- 2.35.1 From giulio.benetti at benettiengineering.com Fri Oct 7 12:05:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Fri, 7 Oct 2022 14:05:33 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> Message-ID: <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> Hi Wolfgang, On 07/10/22 09:35, Wolfgang Grandegger wrote: > Hello Giulio, > > I send trivial patches directly via email. Without "git send-email..." > and I also didn't use "buildroot/get-developers". I just sent v2, hope > it's fine now!? Yes, now it looks ok. I ask you please to register to patchwork and set v1 patch to superseded: https://patchwork.ozlabs.org/project/buildroot/list/ Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > From my point of few it's a bug... but well, it doesn't really matter. > > Wolfgang > > On 06.10.22 22:14, Giulio Benetti wrote: >> Hi Wolgang, >> >> thanks for contributing! >> >> Something to deal with. >> Before 'git send-email...' do you use buildroot/get-developers script? >> >> I ask this because I'm not in Cc but I maintain this package as well as >> other 2 people. >> >> Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: >>> UDisks2 provides an Library API [1] for accessing the UDisks2 service >>> via >>> "libudisks2.so". For development of UDisks2 clients, install to staging >>> as well! This issue has been reported as bug [2] as well. >> >> It doesn't make sense that this has been reported as a bug since it's >> not a bug but an adding. So please remove last sentence. >> >>> [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] >>> [2] https://bugs.busybox.net/show_bug.cgi?id=15026 >> >> And this line ^^^ too. >> >> Best regards From james.hilliard1 at gmail.com Fri Oct 7 12:24:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:24:47 -0600 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: bump to version 20171122 Message-ID: <20221007122447.1048167-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/ocf-linux/ocf-linux.hash | 2 +- package/ocf-linux/ocf-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ocf-linux/ocf-linux.hash b/package/ocf-linux/ocf-linux.hash index 0bd0ea19df..747bbcab56 100644 --- a/package/ocf-linux/ocf-linux.hash +++ b/package/ocf-linux/ocf-linux.hash @@ -1,2 +1,2 @@ # Locally computed: -sha256 5113609d2c2c43fde962bec1238fe5a81211a751ebb0337b54a9804d40cfef53 ocf-linux-20120127.tar.gz +sha256 3d7984754d58ced5695889744caf1e18a53f5d2e35ed40cc04d3595e59b7431f ocf-linux-20171122.tar.gz diff --git a/package/ocf-linux/ocf-linux.mk b/package/ocf-linux/ocf-linux.mk index 01854fa73a..52169eda4f 100644 --- a/package/ocf-linux/ocf-linux.mk +++ b/package/ocf-linux/ocf-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -OCF_LINUX_VERSION = 20120127 +OCF_LINUX_VERSION = 20171122 OCF_LINUX_SITE = http://downloads.sourceforge.net/project/ocf-linux/ocf-linux/$(OCF_LINUX_VERSION) OCF_LINUX_INSTALL_STAGING = YES -- 2.34.1 From yann.morin at orange.com Fri Oct 7 12:40:43 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 7 Oct 2022 14:40:43 +0200 Subject: [Buildroot] [PATCH 1/1] package/mosquitto: add host variant Message-ID: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> mosquitto can be configured to use password files. Those have a very trivial layout, with one "username:password" tuple per line, not unlike Apache's htpasswd file format, but unlike htpasswd files, the password can be either in clear (boo!), or encrypted (by calling into openssl's libcrypto). Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, again very like Apache's htpasswd, but the encrypted form is different (of course). This encryption is handled by mosquitto_passwd, which can create, update, or delete users, all while storing their encrypted password, or it can also convert a password file with clear-text passwords into a password file with encrypted passwords, e.g. it turns each "foo:bar" entry to their corresponding encrypted form, like "foo:$7$101$yLPgk5fn46d....==". It can be very interesting to maintain a clear-text DB of users:passwords in configuration management [0], and only convert it to encrypted passwords when embedded on the target. Add a host variant for mosquitto, which only installs mosquitto_passwd. [0] ensuring safety, confidentiality, and integrity of that DB is left as an exercise to the user, and is clearly out of scope for Buildroot, like storing the root password in the .config is. Signed-off-by: Yann E. MORIN Cc: Peter Korsgaard Cc: Titouan Christophe Cc: Thomas Petazzoni --- package/Config.in.host | 1 + package/mosquitto/Config.in.host | 4 ++++ package/mosquitto/mosquitto.mk | 20 ++++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 package/mosquitto/Config.in.host diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..84517787cc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -57,6 +57,7 @@ menu "Host utilities" source "package/mfgtools/Config.in.host" source "package/mkpasswd/Config.in.host" source "package/moby-buildkit/Config.in.host" + source "package/mosquitto/Config.in.host" source "package/mtd/Config.in.host" source "package/mtools/Config.in.host" source "package/mxsldr/Config.in.host" diff --git a/package/mosquitto/Config.in.host b/package/mosquitto/Config.in.host new file mode 100644 index 0000000000..39e287ee89 --- /dev/null +++ b/package/mosquitto/Config.in.host @@ -0,0 +1,4 @@ +config BR2_PACKAGE_HOST_MOSQUITTO + bool "host mosquitto (mosquitto_passwd)" + help + Only installs mosquitto_passwd. diff --git a/package/mosquitto/mosquitto.mk b/package/mosquitto/mosquitto.mk index 12de2946b7..a95a2cac4d 100644 --- a/package/mosquitto/mosquitto.mk +++ b/package/mosquitto/mosquitto.mk @@ -128,4 +128,24 @@ define MOSQUITTO_USERS endef endif +HOST_MOSQUITTO_DEPENDENCIES = host-pkgconf host-openssl + +HOST_MOSQUITTO_MAKE_OPTS = \ + $(HOST_CONFIGURE_OPTS) \ + UNAME=Linux \ + STRIP=true \ + prefix=$(HOST_DIR) \ + WITH_WRAP=no \ + WITH_DOCS=no \ + WITH_TLS=yes + +define HOST_MOSQUITTO_BUILD_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) +endef + +define HOST_MOSQUITTO_INSTALL_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) install +endef + $(eval $(generic-package)) +$(eval $(host-generic-package)) -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From james.hilliard1 at gmail.com Fri Oct 7 12:47:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:47:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/assimp: bump to version 5.2.5 Message-ID: <20221007124703.2733559-1-james.hilliard1@gmail.com> Replace disable -Werror patch with new cmake option: -DASSIMP_WARNINGS_AS_ERRORS=OFF Signed-off-by: James Hilliard --- package/assimp/0001-code-disable-Werror.patch | 39 ------------------- package/assimp/assimp.hash | 2 +- package/assimp/assimp.mk | 3 +- 3 files changed, 3 insertions(+), 41 deletions(-) delete mode 100644 package/assimp/0001-code-disable-Werror.patch diff --git a/package/assimp/0001-code-disable-Werror.patch b/package/assimp/0001-code-disable-Werror.patch deleted file mode 100644 index 33867e61c3..0000000000 --- a/package/assimp/0001-code-disable-Werror.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 5146e1c4d58174e302dbdcf2a85c2023be1cffc6 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 10 Dec 2021 15:15:30 +0100 -Subject: [PATCH] code: disable -Werror -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Fixes: - - .../build/assimp-5.1.3/code/PostProcessing/TriangulateProcess.cpp:285:50: error: argument 1 value ?4294967294? exceeds maximum object size 2147483647 [-Werror=alloc-size-larger-than=] - 285 | std::unique_ptr done(new bool[max_out]); - | ^ - [...] - .../host/opt/ext-toolchain/powerpc-buildroot-linux-uclibc/include/c++/9.3.0/new:127:26: note: in a call to allocation function ?void* operator new [](std::size_t)? declared here - 127 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) - | ^~~~~~~~ - -Signed-off-by: Peter Seiderer ---- - code/CMakeLists.txt | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/code/CMakeLists.txt b/code/CMakeLists.txt -index e45bf8a2a..f71b6583d 100644 ---- a/code/CMakeLists.txt -+++ b/code/CMakeLists.txt -@@ -1167,8 +1167,6 @@ TARGET_USE_COMMON_OUTPUT_DIRECTORY(assimp) - # enable warnings as errors ######################################## - IF (MSVC) - TARGET_COMPILE_OPTIONS(assimp PRIVATE /WX) --ELSE() -- TARGET_COMPILE_OPTIONS(assimp PRIVATE -Werror) - ENDIF() - - # adds C_FLAGS required to compile zip.c on old GCC 4.x compiler --- -2.34.1 - diff --git a/package/assimp/assimp.hash b/package/assimp/assimp.hash index a778b79132..86a90927ed 100644 --- a/package/assimp/assimp.hash +++ b/package/assimp/assimp.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c9cbbc8589639cd8c13f65e94a90422a70454e8fa150cf899b6038ba86e9ecff assimp-5.2.1.tar.gz +sha256 b5219e63ae31d895d60d98001ee5bb809fb2c7b2de1e7f78ceeb600063641e1a assimp-5.2.5.tar.gz sha256 147874443d242b4e2bae97036e26ec9d6b37f706174c1bd5ecfcc8c1294cef51 LICENSE diff --git a/package/assimp/assimp.mk b/package/assimp/assimp.mk index 79865673ac..0b6034fb8e 100644 --- a/package/assimp/assimp.mk +++ b/package/assimp/assimp.mk @@ -4,7 +4,7 @@ # ################################################################################ -ASSIMP_VERSION = 5.2.1 +ASSIMP_VERSION = 5.2.5 ASSIMP_SITE = $(call github,assimp,assimp,v$(ASSIMP_VERSION)) ASSIMP_LICENSE = BSD-3-Clause ASSIMP_LICENSE_FILES = LICENSE @@ -39,6 +39,7 @@ ASSIMP_CXXFLAGS += -O0 endif ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \ + -DASSIMP_WARNINGS_AS_ERRORS=OFF \ -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)" $(eval $(cmake-package)) -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 12:52:50 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:52:50 -0600 Subject: [Buildroot] [PATCH 1/1] package/brltty: bump to version 6.5 Message-ID: <20221007125250.3259333-1-james.hilliard1@gmail.com> README hash changed due to version update: https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 Signed-off-by: James Hilliard --- package/brltty/brltty.hash | 4 ++-- package/brltty/brltty.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/brltty/brltty.hash b/package/brltty/brltty.hash index cec074d8ce..9fc63714bc 100644 --- a/package/brltty/brltty.hash +++ b/package/brltty/brltty.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 bc7573b0d0ab865c36607945b64c209312405571788f3b409397726f6143eaa6 brltty-6.4.tar.xz +sha256 2f173535291ba39b5a9fc8d80c349234333d92042d95d6dd88796c98a02f316b brltty-6.5.tar.xz sha256 d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f LICENSE-LGPL -sha256 429be921e6bf783303a1f94cbb7f29dc4f0839e47efe38150b808f886028f4df README +sha256 c00c876cb4581a6b54fcc176f7e694896e5b52c4b015615566a787e8bc89fe69 README diff --git a/package/brltty/brltty.mk b/package/brltty/brltty.mk index 600bf596df..dc5a38cddb 100644 --- a/package/brltty/brltty.mk +++ b/package/brltty/brltty.mk @@ -4,7 +4,7 @@ # ################################################################################ -BRLTTY_VERSION = 6.4 +BRLTTY_VERSION = 6.5 BRLTTY_SOURCE = brltty-$(BRLTTY_VERSION).tar.xz BRLTTY_SITE = http://brltty.com/archive BRLTTY_INSTALL_STAGING_OPTS = INSTALL_ROOT=$(STAGING_DIR) install -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 13:39:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 07:39:11 -0600 Subject: [Buildroot] [PATCH 1/2] package/libglib2: bump to version 2.74.0 Message-ID: <20221007133912.2869000-1-james.hilliard1@gmail.com> Drop patch which is now upstream. Replace pcre with pcre2 dependency. Drop no longer supported fam option. COPYING hash changed due to formatting changes. Signed-off-by: James Hilliard --- .../0002-remove-cpp-requirement.patch | 87 ------------------- package/libglib2/libglib2.hash | 6 +- package/libglib2/libglib2.mk | 9 +- 3 files changed, 7 insertions(+), 95 deletions(-) delete mode 100644 package/libglib2/0002-remove-cpp-requirement.patch diff --git a/package/libglib2/0002-remove-cpp-requirement.patch b/package/libglib2/0002-remove-cpp-requirement.patch deleted file mode 100644 index 84511dea32..0000000000 --- a/package/libglib2/0002-remove-cpp-requirement.patch +++ /dev/null @@ -1,87 +0,0 @@ -From dd65a8cfdeafeb18b72d8d1eb676c7ca43ae505f Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Mon, 16 Sep 2019 10:12:38 -0700 -Subject: [PATCH] remove cpp requirement - -The c++ test is necessary to ensure libglib doesn't accidentally use C++ -reserved keywords in public headers. Because this is just a test, it isn't -necessary to have a C++ compiler to build libglib2. - -Signed-off-by: Adam Duskett -Upstream status: Denied (Buildroot specific) -https://gitlab.gnome.org/GNOME/glib/issues/1748 ---- - glib/glibconfig.h.in | 1 - - meson.build | 19 +------------------ - 2 files changed, 1 insertion(+), 19 deletions(-) - -diff --git a/glib/glibconfig.h.in b/glib/glibconfig.h.in -index e66748d95..2173d8be6 100644 ---- a/glib/glibconfig.h.in -+++ b/glib/glibconfig.h.in -@@ -119,7 +119,6 @@ typedef unsigned @glib_intptr_type_define@ guintptr; - @glib_vacopy@ - - @g_have_iso_c_varargs@ -- at g_have_iso_cxx_varargs@ - - /* gcc-2.95.x supports both gnu style and ISO varargs, but if -ansi - * is passed ISO vararg support is turned off, and there is no work -diff --git a/meson.build b/meson.build -index 48fdfe864..5df242e39 100644 ---- a/meson.build -+++ b/meson.build -@@ -1,4 +1,4 @@ --project('glib', 'c', 'cpp', -+project('glib', 'c', - version : '2.72.3', - # NOTE: We keep this pinned at 0.52 because that's what Debian Stable ships - meson_version : '>= 0.52.0', -@@ -10,7 +10,6 @@ project('glib', 'c', 'cpp', - ) - - cc = meson.get_compiler('c') --cxx = meson.get_compiler('cpp') - - cc_can_run = not meson.is_cross_build() or meson.has_exe_wrapper() - -@@ -495,7 +494,6 @@ else - endif - - add_project_arguments(cc.get_supported_arguments(warning_c_args), language: 'c') --add_project_arguments(cxx.get_supported_arguments(warning_cxx_args), language: 'cpp') - - # FIXME: We cannot build some of the GResource tests with -z nodelete, which - # means we cannot use that flag in add_project_link_arguments(), and must add -@@ -1734,20 +1732,6 @@ if g_have_iso_c_varargs - #endif''') - endif - --g_have_iso_cxx_varargs = cxx.compiles(''' -- void some_func (void) { -- int a(int p1, int p2, int p3); -- #define call_a(...) a(1,__VA_ARGS__) -- call_a(2,3); -- }''', name : 'ISO C99 varargs macros in C++') -- --if g_have_iso_cxx_varargs -- glibconfig_conf.set('g_have_iso_cxx_varargs', ''' --#ifdef __cplusplus --# define G_HAVE_ISO_VARARGS 1 --#endif''') --endif -- - g_have_gnuc_varargs = cc.compiles(''' - void some_func (void) { - int a(int p1, int p2, int p3); -@@ -2381,7 +2365,6 @@ subdir('gobject') - subdir('gthread') - subdir('gmodule') - subdir('gio') --subdir('fuzzing') - if build_tests - subdir('tests') - endif --- -2.34.1 - diff --git a/package/libglib2/libglib2.hash b/package/libglib2/libglib2.hash index 0395ff234a..ccda94f7c1 100644 --- a/package/libglib2/libglib2.hash +++ b/package/libglib2/libglib2.hash @@ -1,4 +1,4 @@ -# https://download.gnome.org/sources/glib/2.72/glib-2.72.3.sha256sum -sha256 4a39a2f624b8512d500d5840173eda7fa85f51c109052eae806acece85d345f0 glib-2.72.3.tar.xz +# https://download.gnome.org/sources/glib/2.74/glib-2.74.0.sha256sum +sha256 3652c7f072d7b031a6b5edd623f77ebc5dcd2ae698598abcc89ff39ca75add30 glib-2.74.0.tar.xz # License files, locally calculated -sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING +sha256 fa6f36630bb1e0c571d34b2bbdf188d08495c9dbf58f28cac112f303fc1f58fb COPYING diff --git a/package/libglib2/libglib2.mk b/package/libglib2/libglib2.mk index 2970d5a7a9..a0dea81c3f 100644 --- a/package/libglib2/libglib2.mk +++ b/package/libglib2/libglib2.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBGLIB2_VERSION_MAJOR = 2.72 -LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).3 +LIBGLIB2_VERSION_MAJOR = 2.74 +LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).0 LIBGLIB2_SOURCE = glib-$(LIBGLIB2_VERSION).tar.xz LIBGLIB2_SITE = http://ftp.gnome.org/pub/gnome/sources/glib/$(LIBGLIB2_VERSION_MAJOR) LIBGLIB2_LICENSE = LGPL-2.1+ @@ -24,7 +24,6 @@ endif HOST_LIBGLIB2_CONF_OPTS = \ -Ddtrace=false \ - -Dfam=false \ -Dglib_debug=disabled \ -Dlibelf=disabled \ -Dselinux=disabled \ @@ -35,12 +34,12 @@ HOST_LIBGLIB2_CONF_OPTS = \ LIBGLIB2_DEPENDENCIES = \ host-pkgconf host-libglib2 \ - libffi pcre zlib $(TARGET_NLS_DEPENDENCIES) + libffi pcre2 zlib $(TARGET_NLS_DEPENDENCIES) HOST_LIBGLIB2_DEPENDENCIES = \ host-gettext \ host-libffi \ - host-pcre \ + host-pcre2 \ host-pkgconf \ host-util-linux \ host-zlib -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 13:39:12 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 07:39:12 -0600 Subject: [Buildroot] [PATCH 2/2] package/gobject-introspection: bump to version 1.74.0 In-Reply-To: <20221007133912.2869000-1-james.hilliard1@gmail.com> References: <20221007133912.2869000-1-james.hilliard1@gmail.com> Message-ID: <20221007133912.2869000-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gobject-introspection/gobject-introspection.hash | 4 ++-- package/gobject-introspection/gobject-introspection.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gobject-introspection/gobject-introspection.hash b/package/gobject-introspection/gobject-introspection.hash index 8f9d323d9a..c1a1363ddb 100644 --- a/package/gobject-introspection/gobject-introspection.hash +++ b/package/gobject-introspection/gobject-introspection.hash @@ -1,5 +1,5 @@ -#From http://ftp.gnome.org/pub/GNOME/sources/gobject-introspection/1.70/gobject-introspection-1.72.0.sha256sum -sha256 02fe8e590861d88f83060dd39cda5ccaa60b2da1d21d0f95499301b186beaabc gobject-introspection-1.72.0.tar.xz +#From https://download.gnome.org/sources/gobject-introspection/1.74/gobject-introspection-1.74.0.sha256sum +sha256 347b3a719e68ba4c69ff2d57ee2689233ea8c07fc492205e573386779e42d653 gobject-introspection-1.74.0.tar.xz sha256 faa2e414bd5f91d2d2c39e85c7cc3f2ccde05c3306f96b404f8ed8cf0266c279 COPYING.LGPL sha256 4c1cedcbb4a12ea964f1160dbbf36099e5a59b96129a99a1a1a61f2cb09271fb COPYING.GPL sha256 23f82cbc9808cdd8e902df38271434040ce0562ca382ac2a96f5e3bf807b6d31 giscanner/scannerlexer.l diff --git a/package/gobject-introspection/gobject-introspection.mk b/package/gobject-introspection/gobject-introspection.mk index c8ad9b3c72..436c12aa48 100644 --- a/package/gobject-introspection/gobject-introspection.mk +++ b/package/gobject-introspection/gobject-introspection.mk @@ -4,7 +4,7 @@ # ################################################################################ -GOBJECT_INTROSPECTION_VERSION_MAJOR = 1.72 +GOBJECT_INTROSPECTION_VERSION_MAJOR = 1.74 GOBJECT_INTROSPECTION_VERSION = $(GOBJECT_INTROSPECTION_VERSION_MAJOR).0 GOBJECT_INTROSPECTION_SITE = http://ftp.gnome.org/pub/GNOME/sources/gobject-introspection/$(GOBJECT_INTROSPECTION_VERSION_MAJOR) GOBJECT_INTROSPECTION_SOURCE = gobject-introspection-$(GOBJECT_INTROSPECTION_VERSION).tar.xz -- 2.34.1 From wg at grandegger.com Fri Oct 7 15:04:14 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 17:04:14 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> Message-ID: Done! Thx, Wolfgang On 07.10.22 14:05, Giulio Benetti wrote: > Hi Wolfgang, > > On 07/10/22 09:35, Wolfgang Grandegger wrote: >> Hello Giulio, >> >> I send trivial patches directly via email. Without "git send-email..." >> and I also didn't use "buildroot/get-developers". I just sent v2, hope >> it's fine now!? > > Yes, now it looks ok. I ask you please to register to patchwork and set > v1 patch to superseded: > https://patchwork.ozlabs.org/project/buildroot/list/ > > Thank you! > Best regards From peter at korsgaard.com Fri Oct 7 15:40:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:40:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/mosquitto: add host variant In-Reply-To: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> (yann morin's message of "Fri, 7 Oct 2022 14:40:43 +0200") References: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> Message-ID: <874jwfskvc.fsf@dell.be.48ers.dk> >>>>> writes: > mosquitto can be configured to use password files. Those have a very > trivial layout, with one "username:password" tuple per line, not unlike > Apache's htpasswd file format, but unlike htpasswd files, the password > can be either in clear (boo!), or encrypted (by calling into openssl's > libcrypto). > Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, > again very like Apache's htpasswd, but the encrypted form is different > (of course). This encryption is handled by mosquitto_passwd, which can > create, update, or delete users, all while storing their encrypted > password, or it can also convert a password file with clear-text > passwords into a password file with encrypted passwords, e.g. it turns > each "foo:bar" entry to their corresponding encrypted form, like > "foo:$7$101$yLPgk5fn46d....==". > It can be very interesting to maintain a clear-text DB of > users:passwords in configuration management [0], and only convert it to > encrypted passwords when embedded on the target. > Add a host variant for mosquitto, which only installs mosquitto_passwd. > [0] ensuring safety, confidentiality, and integrity of that DB is left > as an exercise to the user, and is clearly out of scope for Buildroot, > like storing the root password in the .config is. > Signed-off-by: Yann E. MORIN > Cc: Peter Korsgaard > Cc: Titouan Christophe > Cc: Thomas Petazzoni Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:40:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:40:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/assimp: bump to version 5.2.5 In-Reply-To: <20221007124703.2733559-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:47:03 -0600") References: <20221007124703.2733559-1-james.hilliard1@gmail.com> Message-ID: <87zge7r69y.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Replace disable -Werror patch with new cmake option: > -DASSIMP_WARNINGS_AS_ERRORS=OFF > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:41:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:41:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/brltty: bump to version 6.5 In-Reply-To: <20221007125250.3259333-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:52:50 -0600") References: <20221007125250.3259333-1-james.hilliard1@gmail.com> Message-ID: <87v8ovr695.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > README hash changed due to version update: > https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:41:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:41:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: bump to version 20171122 In-Reply-To: <20221007122447.1048167-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:24:47 -0600") References: <20221007122447.1048167-1-james.hilliard1@gmail.com> Message-ID: <87r0zjr686.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:38:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:38:53 +0200 Subject: [Buildroot] [git commit] package/mosquitto: add host variant Message-ID: <20221007154207.C93ED86B8D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd9f138b5a9419c5a251411e2abbdc4bbf3a43f7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mosquitto can be configured to use password files. Those have a very trivial layout, with one "username:password" tuple per line, not unlike Apache's htpasswd file format, but unlike htpasswd files, the password can be either in clear (boo!), or encrypted (by calling into openssl's libcrypto). Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, again very like Apache's htpasswd, but the encrypted form is different (of course). This encryption is handled by mosquitto_passwd, which can create, update, or delete users, all while storing their encrypted password, or it can also convert a password file with clear-text passwords into a password file with encrypted passwords, e.g. it turns each "foo:bar" entry to their corresponding encrypted form, like "foo:$7$101$yLPgk5fn46d....==". It can be very interesting to maintain a clear-text DB of users:passwords in configuration management [0], and only convert it to encrypted passwords when embedded on the target. Add a host variant for mosquitto, which only installs mosquitto_passwd. [0] ensuring safety, confidentiality, and integrity of that DB is left as an exercise to the user, and is clearly out of scope for Buildroot, like storing the root password in the .config is. Signed-off-by: Yann E. MORIN Cc: Peter Korsgaard Cc: Titouan Christophe Cc: Thomas Petazzoni Signed-off-by: Peter Korsgaard --- package/Config.in.host | 1 + package/mosquitto/Config.in.host | 4 ++++ package/mosquitto/mosquitto.mk | 20 ++++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..84517787cc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -57,6 +57,7 @@ menu "Host utilities" source "package/mfgtools/Config.in.host" source "package/mkpasswd/Config.in.host" source "package/moby-buildkit/Config.in.host" + source "package/mosquitto/Config.in.host" source "package/mtd/Config.in.host" source "package/mtools/Config.in.host" source "package/mxsldr/Config.in.host" diff --git a/package/mosquitto/Config.in.host b/package/mosquitto/Config.in.host new file mode 100644 index 0000000000..39e287ee89 --- /dev/null +++ b/package/mosquitto/Config.in.host @@ -0,0 +1,4 @@ +config BR2_PACKAGE_HOST_MOSQUITTO + bool "host mosquitto (mosquitto_passwd)" + help + Only installs mosquitto_passwd. diff --git a/package/mosquitto/mosquitto.mk b/package/mosquitto/mosquitto.mk index 12de2946b7..a95a2cac4d 100644 --- a/package/mosquitto/mosquitto.mk +++ b/package/mosquitto/mosquitto.mk @@ -128,4 +128,24 @@ define MOSQUITTO_USERS endef endif +HOST_MOSQUITTO_DEPENDENCIES = host-pkgconf host-openssl + +HOST_MOSQUITTO_MAKE_OPTS = \ + $(HOST_CONFIGURE_OPTS) \ + UNAME=Linux \ + STRIP=true \ + prefix=$(HOST_DIR) \ + WITH_WRAP=no \ + WITH_DOCS=no \ + WITH_TLS=yes + +define HOST_MOSQUITTO_BUILD_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) +endef + +define HOST_MOSQUITTO_INSTALL_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) install +endef + $(eval $(generic-package)) +$(eval $(host-generic-package)) From peter at korsgaard.com Fri Oct 7 15:39:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:39:48 +0200 Subject: [Buildroot] [git commit] package/assimp: bump to version 5.2.5 Message-ID: <20221007154207.D82F986B8E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7d843d9cc0064d6690cfc000e579f575e2c0cc4d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Replace disable -Werror patch with new cmake option: -DASSIMP_WARNINGS_AS_ERRORS=OFF Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/assimp/0001-code-disable-Werror.patch | 39 --------------------------- package/assimp/assimp.hash | 2 +- package/assimp/assimp.mk | 3 ++- 3 files changed, 3 insertions(+), 41 deletions(-) diff --git a/package/assimp/0001-code-disable-Werror.patch b/package/assimp/0001-code-disable-Werror.patch deleted file mode 100644 index 33867e61c3..0000000000 --- a/package/assimp/0001-code-disable-Werror.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 5146e1c4d58174e302dbdcf2a85c2023be1cffc6 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 10 Dec 2021 15:15:30 +0100 -Subject: [PATCH] code: disable -Werror -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Fixes: - - .../build/assimp-5.1.3/code/PostProcessing/TriangulateProcess.cpp:285:50: error: argument 1 value ???4294967294??? exceeds maximum object size 2147483647 [-Werror=alloc-size-larger-than=] - 285 | std::unique_ptr done(new bool[max_out]); - | ^ - [...] - .../host/opt/ext-toolchain/powerpc-buildroot-linux-uclibc/include/c++/9.3.0/new:127:26: note: in a call to allocation function ???void* operator new [](std::size_t)??? declared here - 127 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) - | ^~~~~~~~ - -Signed-off-by: Peter Seiderer ---- - code/CMakeLists.txt | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/code/CMakeLists.txt b/code/CMakeLists.txt -index e45bf8a2a..f71b6583d 100644 ---- a/code/CMakeLists.txt -+++ b/code/CMakeLists.txt -@@ -1167,8 +1167,6 @@ TARGET_USE_COMMON_OUTPUT_DIRECTORY(assimp) - # enable warnings as errors ######################################## - IF (MSVC) - TARGET_COMPILE_OPTIONS(assimp PRIVATE /WX) --ELSE() -- TARGET_COMPILE_OPTIONS(assimp PRIVATE -Werror) - ENDIF() - - # adds C_FLAGS required to compile zip.c on old GCC 4.x compiler --- -2.34.1 - diff --git a/package/assimp/assimp.hash b/package/assimp/assimp.hash index a778b79132..86a90927ed 100644 --- a/package/assimp/assimp.hash +++ b/package/assimp/assimp.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c9cbbc8589639cd8c13f65e94a90422a70454e8fa150cf899b6038ba86e9ecff assimp-5.2.1.tar.gz +sha256 b5219e63ae31d895d60d98001ee5bb809fb2c7b2de1e7f78ceeb600063641e1a assimp-5.2.5.tar.gz sha256 147874443d242b4e2bae97036e26ec9d6b37f706174c1bd5ecfcc8c1294cef51 LICENSE diff --git a/package/assimp/assimp.mk b/package/assimp/assimp.mk index 79865673ac..0b6034fb8e 100644 --- a/package/assimp/assimp.mk +++ b/package/assimp/assimp.mk @@ -4,7 +4,7 @@ # ################################################################################ -ASSIMP_VERSION = 5.2.1 +ASSIMP_VERSION = 5.2.5 ASSIMP_SITE = $(call github,assimp,assimp,v$(ASSIMP_VERSION)) ASSIMP_LICENSE = BSD-3-Clause ASSIMP_LICENSE_FILES = LICENSE @@ -39,6 +39,7 @@ ASSIMP_CXXFLAGS += -O0 endif ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \ + -DASSIMP_WARNINGS_AS_ERRORS=OFF \ -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)" $(eval $(cmake-package)) From peter at korsgaard.com Fri Oct 7 15:40:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:40:54 +0200 Subject: [Buildroot] [git commit] package/brltty: bump to version 6.5 Message-ID: <20221007154207.E592D86B90@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=82c6e87d5eaaf5b32aa340ab384f88539238cbe1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master README hash changed due to version update: https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/brltty/brltty.hash | 4 ++-- package/brltty/brltty.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/brltty/brltty.hash b/package/brltty/brltty.hash index cec074d8ce..9fc63714bc 100644 --- a/package/brltty/brltty.hash +++ b/package/brltty/brltty.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 bc7573b0d0ab865c36607945b64c209312405571788f3b409397726f6143eaa6 brltty-6.4.tar.xz +sha256 2f173535291ba39b5a9fc8d80c349234333d92042d95d6dd88796c98a02f316b brltty-6.5.tar.xz sha256 d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f LICENSE-LGPL -sha256 429be921e6bf783303a1f94cbb7f29dc4f0839e47efe38150b808f886028f4df README +sha256 c00c876cb4581a6b54fcc176f7e694896e5b52c4b015615566a787e8bc89fe69 README diff --git a/package/brltty/brltty.mk b/package/brltty/brltty.mk index 600bf596df..dc5a38cddb 100644 --- a/package/brltty/brltty.mk +++ b/package/brltty/brltty.mk @@ -4,7 +4,7 @@ # ################################################################################ -BRLTTY_VERSION = 6.4 +BRLTTY_VERSION = 6.5 BRLTTY_SOURCE = brltty-$(BRLTTY_VERSION).tar.xz BRLTTY_SITE = http://brltty.com/archive BRLTTY_INSTALL_STAGING_OPTS = INSTALL_ROOT=$(STAGING_DIR) install From peter at korsgaard.com Fri Oct 7 15:41:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:41:39 +0200 Subject: [Buildroot] [git commit] package/ocf-linux: bump to version 20171122 Message-ID: <20221007154207.F381786B91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4f00b909b9ee637c255a882fdda580fb1a66a014 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/ocf-linux/ocf-linux.hash | 2 +- package/ocf-linux/ocf-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ocf-linux/ocf-linux.hash b/package/ocf-linux/ocf-linux.hash index 0bd0ea19df..747bbcab56 100644 --- a/package/ocf-linux/ocf-linux.hash +++ b/package/ocf-linux/ocf-linux.hash @@ -1,2 +1,2 @@ # Locally computed: -sha256 5113609d2c2c43fde962bec1238fe5a81211a751ebb0337b54a9804d40cfef53 ocf-linux-20120127.tar.gz +sha256 3d7984754d58ced5695889744caf1e18a53f5d2e35ed40cc04d3595e59b7431f ocf-linux-20171122.tar.gz diff --git a/package/ocf-linux/ocf-linux.mk b/package/ocf-linux/ocf-linux.mk index 01854fa73a..52169eda4f 100644 --- a/package/ocf-linux/ocf-linux.mk +++ b/package/ocf-linux/ocf-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -OCF_LINUX_VERSION = 20120127 +OCF_LINUX_VERSION = 20171122 OCF_LINUX_SITE = http://downloads.sourceforge.net/project/ocf-linux/ocf-linux/$(OCF_LINUX_VERSION) OCF_LINUX_INSTALL_STAGING = YES From david.oberhollenzer at sigma-star.at Fri Oct 7 15:42:14 2022 From: david.oberhollenzer at sigma-star.at (David Oberhollenzer) Date: Fri, 7 Oct 2022 17:42:14 +0200 Subject: [Buildroot] [ANNOUNCE] mtd-utils-2.1.5 is released Message-ID: Hi, mtd-utils-2.1.5 is released. Tarball: ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2 Tarball gpg signature: ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc Signed git tag: git://git.infradead.org/mtd-utils.git v2.1.5 Alternatively also mirrored here: Tarball: https://infraroot.at/pub/mtd/mtd-utils-2.1.5.tar.bz2 Tarball gpg signature: https://infraroot.at/pub/mtd/mtd-utils-2.1.5.tar.bz2.asc Signed git tag: https://git.infraroot.at/mtd-utils.git v2.1.5 This is a smaller, patch level release that consists of a hand full of fixes that have accumulated since the last release in January. Raw short log since the 2.1.4 release: Alex Henrie (1): mkfs.jffs2: fix spelling of --compression-mode parameter in help text Andrew Mellor (1): ubinfo: Fix --vol_id return code for absent volume id Christophe Kerello (1): nandflipbits: fix corrupted oob David Oberhollenzer (1): Release mtd-utils-2.1.5 Enrico Jorns (1): libmtd: do not ignore non-zero eraseblock size when MTD_NO_ERASE is set Frederic Germain (2): .gitignore: add new ubiscan utility Fix warning about unaligned pointer in jffs2reader Khem Raj (1): tests: Remove unused linux/fs.h header from includes Michael Walle (1): mtd-utils: flash_otp_dump make offset optional Mike Frysinger (1): fix test bashism Rafa? Mi?ecki (1): nandwrite: warn about writing 0xff blocks Sascha Hauer (1): mtd-utils: nanddump: fix writing big images on 32bit machines liaohua (1): nor-utils: fix memory leak Regards, David -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_0xBCE5DC3C741A02D1.asc Type: application/pgp-keys Size: 1713 bytes Desc: OpenPGP public key URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 495 bytes Desc: OpenPGP digital signature URL: From dumasv.dev at gmail.com Fri Oct 7 15:50:20 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Fri, 7 Oct 2022 17:50:20 +0200 Subject: [Buildroot] [PATCH v2] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221007155020.177431-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 26 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..c9d40e1cce 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -125,32 +159,8 @@ main() { find_args+=( "-type" "f" "-print" ) - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + export -f patch_file + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Fri Oct 7 15:54:34 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Fri, 7 Oct 2022 17:54:34 +0200 Subject: [Buildroot] [PATCH v2] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221007155434.178261-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From wdouglass at carnegierobotics.com Fri Oct 7 16:27:32 2022 From: wdouglass at carnegierobotics.com (Woody Douglass) Date: Fri, 7 Oct 2022 16:27:32 +0000 Subject: [Buildroot] [PATCH 1/1] Force cmake packages to use makefiles Message-ID: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> Force cmake packages to use the "Unix Makefiles" generator in case CMAKE_GENERATOR is set in the host environment. This patch further isolates the buildroot build environment from the host. Signed-off-by: Woodrow Douglass --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..db9fdebb8d 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/to olchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ -- 2.20.1 From giulio.benetti at benettiengineering.com Fri Oct 7 16:28:17 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Fri, 7 Oct 2022 18:28:17 +0200 Subject: [Buildroot] [PATCH v2] package/udisks: install to staging In-Reply-To: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> References: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> Message-ID: Hi Wolfgang, On 07/10/22 09:27, Wolfgang Grandegger wrote: > UDisks2 provides a Library API [1] for accessing the UDisks2 service > via "libudisks2.so". For development of UDisks2 clients, install to > staging as well! > > [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html > > Signed-off-by: Wolfgang Grandegger Just checked with buildroot/test-pkg and it works correctly. Commit log looks ok to me so: Reviewed-by: Giulio Benetti Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > --- > > -Changes since v1: > ?Remove note about the reported bug and add authors listed by > ?"utils/get-developers". > > ?package/udisks/udisks.mk | 1 + > ?1 file changed, 1 insertion(+) > > diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk > index 2bf519a2cc..959333d01f 100644 > --- a/package/udisks/udisks.mk > +++ b/package/udisks/udisks.mk > @@ -10,6 +10,7 @@ UDISKS_SITE = > https://github.com/storaged-project/udisks/releases/download/udisk > ?UDISKS_LICENSE = GPL-2.0+ > ?UDISKS_LICENSE_FILES = COPYING > ?UDISKS_CPE_ID_VENDOR = freedesktop > +UDISKS_INSTALL_STAGING = YES > > ?UDISKS_DEPENDENCIES = \ > ???? host-pkgconf \ From gary.bisson at boundarydevices.com Fri Oct 7 19:10:21 2022 From: gary.bisson at boundarydevices.com (Gary Bisson) Date: Fri, 7 Oct 2022 21:10:21 +0200 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-6-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> <20221006095833.1116173-6-aperez@igalia.com> Message-ID: On Thu, Oct 06, 2022 at 12:58:33PM +0300, Adrian Perez de Castro wrote: > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > This imports a small patch to properly pick libdrm compiler flags, > fetched from the upstream repository. > > Signed-off-by: Adrian Perez de Castro Tested-by: Gary Bisson Actually applies to the whole series, tested on i.MX 8M Plus platform (Vivante GPU libs) and everything worked fine. Regards, Gary From prabhu.sannachi at collins.com Fri Oct 7 21:19:32 2022 From: prabhu.sannachi at collins.com (prabhu sannachi) Date: Fri, 7 Oct 2022 16:19:32 -0500 Subject: [Buildroot] [PATCH v1 1/1] package/redis-plus-plus: new package Message-ID: <20221007211932.481-1-prabhu.sannachi@collins.com> From: prabhusannachi Redis client written in C++ This is a C++ client library for Redis. It's based on hiredis, and is compatible with C++ 17, C++ 14, and C++ 11. https://github.com/sewenew/redis-plus-plus Signed-off-by: Prabhu Sannachi --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/redis-plus-plus/Config.in | 11 +++++++++++ package/redis-plus-plus/redis-plus-plus.hash | 3 +++ package/redis-plus-plus/redis-plus-plus.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 45 insertions(+) create mode 100644 package/redis-plus-plus/Config.in create mode 100644 package/redis-plus-plus/redis-plus-plus.hash create mode 100644 package/redis-plus-plus/redis-plus-plus.mk diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6..2f24fca 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2435,6 +2435,9 @@ F: package/libdvbpsi/ F: package/mraa/ F: package/synergy/ +N: Prabhu Sannachi +F: package/redis-plus-plus/ + N: Rafal Susz F: board/avnet/s6lx9_microboard/ F: configs/s6lx9_microboard_defconfig diff --git a/package/Config.in b/package/Config.in index e3a34d6..8235864 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1491,6 +1491,7 @@ if BR2_PACKAGE_POSTGRESQL source "package/postgis/Config.in" endif source "package/redis/Config.in" + source "package/redis-plus-plus/Config.in" source "package/rocksdb/Config.in" source "package/sqlcipher/Config.in" source "package/sqlite/Config.in" diff --git a/package/redis-plus-plus/Config.in b/package/redis-plus-plus/Config.in new file mode 100644 index 0000000..3c23dc5 --- /dev/null +++ b/package/redis-plus-plus/Config.in @@ -0,0 +1,11 @@ +config BR2_PACKAGE_REDIS_PLUS_PLUS + bool "redis-plus-plus" + select BR2_PACKAGE_HIREDIS + help + Redis client written in C++ + + This is a C++ client library for Redis. + It's based on hiredis, and is compatible + with C++ 17, C++ 14, and C++ 11. + + https://github.com/sewenew/redis-plus-plus diff --git a/package/redis-plus-plus/redis-plus-plus.hash b/package/redis-plus-plus/redis-plus-plus.hash new file mode 100644 index 0000000..93e58e2 --- /dev/null +++ b/package/redis-plus-plus/redis-plus-plus.hash @@ -0,0 +1,3 @@ +# Locally calculated: +sha256 a49a72fef26ed39d36a278fcc4e4d92822e111697b5992d8f26f70d16edc6c1f redis-plus-plus-1.3.5.tar.gz +sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE diff --git a/package/redis-plus-plus/redis-plus-plus.mk b/package/redis-plus-plus/redis-plus-plus.mk new file mode 100644 index 0000000..145fcbe --- /dev/null +++ b/package/redis-plus-plus/redis-plus-plus.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# redis-plus-plus +# +################################################################################ + +REDIS_PLUS_PLUS_VERSION = 1.3.5 +REDIS_PLUS_PLUS_SITE = $(call github,sewenew,redis-plus-plus,$(REDIS_PLUS_PLUS_VERSION)) +REDIS_PLUS_PLUS_LICENSE = Apache-2.0 license +REDIS_PLUS_PLUS_LICENSE_FILES = LICENSE +REDIS_PLUS_PLUS_INSTALL_STAGING = YES +REDIS_PLUS_PLUS_DEPENDENCIES += hiredis + +# since version 1.3.0, by default, redis-plus-plus is built with the -std=c++17 standard +ifneq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_8),y) + ifeq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_5),y) + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_CXX_STANDARD=14 + else + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_CXX_STANDARD=11 + endif +endif + +ifneq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_4_9),y) + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_BUILD_TEST=OFF +endif + +$(eval $(cmake-package)) -- 2.7.4 From vfazio at xes-inc.com Fri Oct 7 23:50:02 2022 From: vfazio at xes-inc.com (Vincent Fazio) Date: Fri, 7 Oct 2022 18:50:02 -0500 Subject: [Buildroot] [PATCH 2/2] package/busybox: redirect errors to /dev/null In-Reply-To: <20221007235002.79221-1-vfazio@xes-inc.com> References: <20221007235002.79221-1-vfazio@xes-inc.com> Message-ID: <20221007235002.79221-2-vfazio@xes-inc.com> When busybox.mk gets read, pkg-conf gets executed to determine the location of relevant libraries. When Busybox is built with per-package directories enabled, a number of errors related to executing pkg-conf occur because directories have not been synced to provide pkg-confg at the point when it executes. These errors occur in stages prior configuring the package and are of little consequence so redirect the errors to /dev/null. Signed-off-by: Vincent Fazio --- package/busybox/busybox.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/busybox/busybox.mk b/package/busybox/busybox.mk index ef628e90e9..0dec8d6d60 100644 --- a/package/busybox/busybox.mk +++ b/package/busybox/busybox.mk @@ -79,10 +79,10 @@ BUSYBOX_DEPENDENCIES = \ # support for NFS mounting with BusyBox ifeq ($(BR2_PACKAGE_LIBTIRPC),y) BUSYBOX_DEPENDENCIES += libtirpc host-pkgconf -BUSYBOX_CFLAGS += "`$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc`" +BUSYBOX_CFLAGS += "`$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc 2>/dev/null`" # Don't use LDFLAGS for -ltirpc, because LDFLAGS is used for # the non-final link of modules as well. -BUSYBOX_CFLAGS_busybox += "`$(PKG_CONFIG_HOST_BINARY) --libs libtirpc`" +BUSYBOX_CFLAGS_busybox += "`$(PKG_CONFIG_HOST_BINARY) --libs libtirpc 2>/dev/null`" endif # Allows the build system to tweak CFLAGS -- 2.25.1 From vfazio at xes-inc.com Fri Oct 7 23:50:01 2022 From: vfazio at xes-inc.com (Vincent Fazio) Date: Fri, 7 Oct 2022 18:50:01 -0500 Subject: [Buildroot] [PATCH 1/2] package/busybox: add patch to silence build errors Message-ID: <20221007235002.79221-1-vfazio@xes-inc.com> As part of pkg-kconfig, the .config file gets regenerated after fixups. When Busybox is built with per-package directories enabled, the toolchain is not available for Busybox's makefile to determine compiler capabilities so certain calls will fail and emit errors. For now, assume the following are true: Buildroot will not use GCC < 4 Skip a call to cc-ifversion to avoid the following error /buildroot/output/build/busybox-1.35.0/scripts/gcc-version.sh: line 11: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: No such file or directory Target system is linux Skip a call to -dumpmachine to avoid the following error make[2]: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: Command not found Signed-off-by: Vincent Fazio --- ...ags-assume-GCC-4-and-target-is-linux.patch | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch diff --git a/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch b/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch new file mode 100644 index 0000000000..567d46704f --- /dev/null +++ b/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch @@ -0,0 +1,50 @@ +From d384e999e1dff473f2bf084c6a9b9730ad39b878 Mon Sep 17 00:00:00 2001 +From: Vincent Fazio +Date: Thu, 6 Oct 2022 13:16:34 -0500 +Subject: [PATCH] Makefile.flags: assume GCC >= 4 and target is linux + +As part of pkg-kconfig, the .config file gets regenerated after fixups. + +When Busybox is built with per-package directories enabled, the +toolchain is not available for Busybox's makefile to determine compiler +capabilities so certain calls will fail and emit errors. + +For now, assume the following are true: + +Buildroot will not use GCC < 4 + Skip a call to cc-ifversion to avoid the following error + + /buildroot/output/build/busybox-1.35.0/scripts/gcc-version.sh: line 11: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: No such file or directory + +Target system is linux + Skip a call to -dumpmachine to avoid the following error + + make[2]: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: Command not found + +Signed-off-by: Vincent Fazio + +diff --git a/Makefile.flags b/Makefile.flags +index c34356230..274527954 100644 +--- a/Makefile.flags ++++ b/Makefile.flags +@@ -45,7 +45,7 @@ CFLAGS += $(call cc-option,-Werror,) + #CFLAGS += $(call cc-ifversion, -eq, 0404, -fno-strict-aliasing) + endif + # gcc 3.x emits bogus "old style proto" warning on find.c:alloc_action() +-CFLAGS += $(call cc-ifversion, -ge, 0400, -Wold-style-definition) ++CFLAGS += -Wold-style-definition + + ifneq ($(CC),clang) + # "clang-9: warning: optimization flag '-finline-limit=0' is not supported +@@ -184,7 +184,7 @@ LDLIBS += $(if $(SELINUX_LIBS),$(SELINUX_LIBS:-l%=%),$(SELINUX_PC_MODULES:lib%=% + endif + + ifeq ($(CONFIG_FEATURE_NSLOOKUP_BIG),y) +-ifneq (,$(findstring linux,$(shell $(CC) $(CFLAGS) -dumpmachine))) ++ifneq (,$(findstring linux,linux)) + LDLIBS += resolv + endif + endif +-- +2.25.1 + -- 2.25.1 From thomas.petazzoni at bootlin.com Sat Oct 8 06:34:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 08 Oct 2022 06:34:30 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-07 Message-ID: <20221008063436.C38E28258A@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-07 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 2 | 0 | 14 | 2022.05.x | 19 | 11 | 0 | 30 | 2022.08.x | 14 | 10 | 0 | 24 | master | 202 | 397 | 0 | 599 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 21 host-sentry-cli-1.59.0 | 20 sysvinit-2.99 | 18 crun-1.5 | 17 systemd-250.4 | 16 host-f2fs-tools-1.15.0 | 15 btrfs-progs-5.16.2 | 13 autofs-5.1.8 | 11 igd2-for-linux-2.1 | 11 linux-6.0 | 11 gobject-introspection-1.72.0 | 9 elfutils-0.186 | 8 libarchive-3.6.1 | 8 host-binutils-2.38 | 7 libglib2-2.72.3 | 7 ocf-linux-20120127 | 6 unknown | 6 dash-0.5.11.5 | 5 host-gcc-final-11.3.0 | 5 host-go-1.19.1 | 5 host-rust-1.64.0 | 5 linux-pam-1.5.2 | 5 ocf-linux-20171122 | 5 host-pahole-73383b3a39afe86... | 4 batman-adv-2021.4 | 3 casync-4ad9bcb94bc83ff36cfc... | 3 fftw-quad-3.3.8 | 3 fontconfig-2.13.1 | 3 gerbera-1.10.0 | 3 hdparm-9.63 | 3 libcap-ng-0.8.3 | 3 linux-5.10.145-cip17-rt7 | 3 memcached-1.6.16 | 3 open62541-v1.3.3 | 3 perl-5.34.1 | 3 toolchain-external-codescap... | 3 wtfutil-0.41.0 | 3 assimp-5.2.1 | 2 azure-iot-sdk-c-LTS_07_2022... | 2 brltty-6.4 | 2 dahdi-linux-5c840cf43838e06... | 2 efivar-38 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 gmp-6.2.1 | 2 host-gcc-final-10.4.0 | 2 libglvnd-1.4.0 | 2 libostree-2022.5 | 2 linux-5.10.145-cip17 | 2 musl-1.2.3 | 2 openpgm-5-3-128 | 2 tcf-agent-1.7.0 | 2 tealdeer-1.5.0 | 2 valgrind-3.19.0 | 2 wolfssl-5.5.1 | 2 zstd-1.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 acpica-20220331 | 1 acpid-2.0.33 | 1 android-tools-4.2.2+git2013... | 1 augeas-1.12.0 | 1 bcg729-1.1.1 | 1 boost-1.80.0 | 1 cjson-1.7.15 | 1 dhcp-4.4.3 | 1 dropbear-2022.82 | 1 dvdauthor-0.7.2 | 1 exempi-2.6.1 | 1 f2fs-tools-1.15.0 | 1 file-5.41 | 1 flann-1.9.1 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gensio-2.5.5 | 1 gitlab-runner-14.5.1 | 1 glibmm-2.68.2 | 1 google-breakpad-c85eb4a59b6... | 1 hawktracer-2ec19d7192334414... | 1 host-binutils-2.37 | 1 host-gcc-final-12.2.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-python3-3.10.7 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 host-util-linux-2.38 | 1 json-c-0.16 | 1 kvmtool-f77d646ba01d04be5aa... | 1 lapack-3.10.1 | 1 libcurl-7.84.0 | 1 libdill-32d0e8b733416208e04... | 1 libnss-3.83 | 1 libopenh264-2.2.0 | 1 libopenssl-1.1.1q | 1 libqb-2.0.6 | 1 libuhttpd-3.14.1 | 1 libvorbis-1.3.7 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 lttng-modules-2.13.1 | 1 lxc-4.0.12 | 1 matio-1.5.22 | 1 mesa3d-22.1.6 | 1 mongodb-4.2.18 | 1 mxs-bootlets-10.12.01 | 1 ndisc6-1.0.5 | 1 nodejs-16.17.1 | 1 ntp-4.2.8p15 | 1 openblas-0.3.21 | 1 openvmtools-11.3.5-18557794 | 1 package/qt6/qt6base/qt6base... | 1 php-8.1.9 | 1 python-ujson-5.2.0 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rauc-1.8 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 rtl8723ds-76146e85847beb242... | 1 sconeserver-8d1935919a20133... | 1 sqlite-3.39.2 | 1 stress-ng-0.13.05 | 1 sudo-1.9.11p2 | 1 uclibc-ng-test-0844445e7358... | 1 uqmi-0a19b5b77140465c29e2af... | 1 wavemon-0.9.4 | 1 xenomai-3.0.10 | 1 xfsprogs-5.14.2 | 1 xvisor-0.3.1 | 1 zabbix-5.4.9 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/bf5010120eac4c0f4702968ce637463cda643a73 | aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e1951ff6fb915f66283814c01831fd612e37211f | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/85f0e19d1fd3c0840a1c8dc291e503e5e9b546e4 | sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b5f0d5b3a7ea6503c5927453f38829005e82abe0 | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/421e971dcd40f5aa56910d46fb4f13f45e1c33c5 | mips64 | acpica-20220331 | NOK | http://autobuild.buildroot.net/results/550b4b9d4650a77d969413f3d83580978965c39b | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/3c88c9b4261a0d1484ae2fb7588bc508c852f4c7 | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/197999e8f63cfe79892153f69c8ebd48d1ac397b | sh4aeb | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/0d523af1fd58d09ed05cf6bdfbe6e0c5fea91b7b | ORPH mipsel | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/24bf4d156a8967bcc721be977a94a7ab74114b04 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/6d8bca700b32cef4f67a73f6b6b24e93967f2593 | ORPH mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/364cc88b98f913f6cf3f44dedbe5626da0970a35 | armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/afac24e4d3d2460684497a99e4cd6e99af4711f2 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5050a3e88d07f6c02c10d5874694bb7b924bdcfb | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2451c08a5636ea1bbd09df7571384d7fcbb62f7e | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a2cdab2993fae7466de1f084665fdcab3372197c | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d66ceec325fe87330835e23a67aee41b8e4a0720 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3d0601e71e7b70946ec50ce82148b67883b87e87 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ef69f4dad4815141dd3cc618c91a7eecb5de876e | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1d6cc97d21926fe7a979202e0b09295262f5f975 | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/aa2e8c97a39426fd4623b33902632af4f32d357f | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a6b5b3369d148bd05b37e840d0c4c3a8b4ae9487 | xtensa | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/be8ee4437c2dc498b56be7d6464cdd51ff8d77f0 | mipsel | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/f28f8754dcacd054ce99e27a7fd8bd19a68da3b6 | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/0fae9c64db49e0c269d810c0bbdb3e3620f9a7da | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/cd84ad47e85ff462b2b5dc4a76412bbbe2362725 | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/020f7b5b7658585c4593fd3928683a53a210436f | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/1dada1972554bf805c3756994b0d5671410d8618 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/589828f093fca8583d23e5664a54553a159a36dd | microblaze | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/e626c106bc0178f7ee7047fc97c25a6d08ee0710 | mips | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/b196f09b060a4841ae812d1ac31282657730455d | microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a5d8e2fa23c7c2b5cd686364e9b57ad0fc3c4508 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8bb2698bb972b609669873261f81696404f52620 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f799c0b446c8b84df3ee1778b9e6d5f75d8f85f1 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/986ccb1f141a38644788e8d53d5227fcff8cf4f9 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c5197477083427174f2d73ffcb3e068d8c12661f | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4bbfca89090528496ebd6edf8a5c15848457029c | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/544514c1e0becb6ca6292aa5524ea40394e1cdd7 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/557ad252b25fc4d0dcc45383dd52c316cce13dab | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1b9e96e06b2b798837b5448fc1d61d50ca494bc6 | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/3df8b483785c2b0dd00a23819bc3a3f04c8e373d | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c6fa0f340e5ba9bbc0b6be6334f8a711bd3ee2b7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0ba373aef2ebbd824c577c23543e0316460cdafd | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c308b73868999b4cc5d81b6389f13b42c9c49f11 | ORPH microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1b4b8235149c647b477f522c99738fe80981d33e | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/545b6a5c28488d15cee3e5abf06f9fa369a7ca6c | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/0a3ee6b02d0ba13230ee5ceee5fa4ed960d37d26 | riscv64 | cjson-1.7.15 | NOK | http://autobuild.buildroot.net/results/cd983f96f1e80d3461fc620314c9ece5e062f38d | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fad67739c18a3659df27ab778b90875d6a23516 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/611ca11ee4a7b86fcb76389fd3d9697dde8b5892 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c17f7c77afcefd04e53b965bf87629a590b10f8 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/01f4dc8770b6b8d0f9c209a58e884c6d16b647f5 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8add1c37a6094108f637506588b4a3a08996b5a3 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d448abb6f3e6b1dca22cdb0196e21efacb87da9f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c4bc8f9d6584f591854072bcbe07377f06f59ba | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5b5abae01ddd40df9b13119afc6c2e722986cf27 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dd56873131dc4a027be0a2739ff9c4b7ece16b75 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20f9836f6e9c26d79ebb66460a6cd3316ae4ca39 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9f92c0a13fc5d4b68b302ebde26eb526f0f4c1ef | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2d4abb4f3755404cba72d36606bcc0337078ec97 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8886d6bcc2782f1c9b7024f58678225c21627542 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a25c4d83f4b7e31e78596bc697bd5baa0e4f4c59 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7f452bfeef453b9f1138afda125a044ebd4f7e67 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a155dac73499f91d86fd1260790b46cc5b8a8d19 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7cb641997b291ceb24292e14c1de50f5a9d796b0 | microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cc57078f019771d816825dcebdbc9287175637ea | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3ca838db3a784026b8041ec9a5fc15b89cfd1b7e | m68k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0343fdebc6bc77272c6d5c51d4026a8e1e87ba53 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/4c02deea65c4aeab3ef1d7f887389789ae051b35 | ORPH aarch64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8509bd65ff728309a3c7d38e52f39a3ea97a0238 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/2908eb59dd283dfb198d6720f92459d392a7e2ff | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f788bb556b6f97c6141a7c7ce657316604f9ec84 | ORPH sh4aeb | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/4feddd2ed34f6e8c0c1a4832fbcbab347e437783 | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/ddd5e88f15d12a079a53b27891c1b2cdb20b3e8f | sparc | dvdauthor-0.7.2 | NOK | http://autobuild.buildroot.net/results/6bafca2f1903ba9c8e06a28213ed4b6434aa5069 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/79bd2ff1ede0ac545d439f0134fd03b6c884bfe3 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/e24079373d1cf27057e2c2264c5e88a642aa324b | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/31cee9d705cc5c7e89aac71c62b33eb07b9525ca | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/bf6c301571b4ec0c861cda70192c4cf3a69f6c21 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/70741d0e8e369ee6e4ebbe97e43dd21f07f3184c | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/34e620c15e19bda26d2ffc8aee420fcec2dc2bb0 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/7f3434fc41faa9c9ad7d2132324e8d5f4df5dc0d | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a7b1a906b25825049f33f06833b9d9c7cff4fc0a | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/51475f22ca39c9990eefc75d280622ba23a4922f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/06ff8e5ce8a8369c425bc3dce925ff49cba38b0c | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/e9d5e440102cf7aca3658fa62933f3acc3f31e45 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/34fd1d0a67ceef64fc51a06b03c768e6af1a23c4 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/a912e6a8e4f853e9d6b82203adbf809a32c7d059 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/53d0805a6cd431b90370d5eef5bc78c015f8c2c5 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/3b5e393133e5201e8a28fbd7b6edcd3f310582b2 | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/5873b40bbf1d31f63d45436117854df7b7d04046 | ORPH mips | flann-1.9.1 | NOK | http://autobuild.buildroot.net/results/cd5a4b1f8bf188dc797acbc25b28f0724e17f198 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/70e9c4ffef464e4c842a82677904719e423d3caa | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/3b98a0747c5e42774cc41f8c3ea44ecd84327a12 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/30814da3dda48fb042ebcfc013817c7d6f065ceb | ORPH microblaze | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/cd8f9c883f6810b9468707a33f7fd45f304ee4ca | powerpc64le | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/68169d9708e871d5c194ad817e788ec93435ddb1 | i686 | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/f2f7ef95c9841f738534dc2107f084f16dae5d5c | powerpc64le | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/87f27753bea1fd2f7483777331ed9fd7f716072e | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/7bcba81ae984ac0267950a951ec1386e7864220a | microblazeel | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/d8b0c5278dbee7e332c51887906a7b395c7a9862 | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/845af223698c0f4cee97d27d9519fd8daeb9bae1 | nios2 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/0b34c470db40b87318021303bf467e6f15787352 | sparc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/e7f8ccd7e1399f0f4e780ba7633964bb54cd492c | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/0cebcb314f2c04a83124255e560a9377227ed285 | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/74b8dea50d861717335052121078dea7553b0878 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/acc161ddfe1edc50ba50361be7427b48c6e72bdb | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b624bedfe83a74b37727b35164f53c1f29c72517 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cbc83e8fad4ddeba89b40f83845fdab34323a949 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c120b7181de47579aac512b9f7d2c3e5a86fb807 | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/50b159096aef8b9ccdb87e8e3f95bffc9b69db68 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00b702cbff8c9b094c9cb2a50c88048d2817c911 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef53b62b2d94248c73156f33a03e1cd92797c691 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2045fab4c2da7a9b42cca936bd4ea8a59d75f811 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51205f766deca4148bb5151554795a8e2db2a05c | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd508576297b7bae4e5c2ccfc7b01f53c831d950 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77247eff940e4dd4f0642c9d9dbc56eefb43df70 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1928e0642eedf01a5a709441e38880b4bed3504e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d12053c2a4db50ab5559d764dcc0dbe31862b7b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a7ad9772aaaaf4d044e3e2f28a6ea87a5a4a08f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32176c21d8faefa2824a2ee82569168fe2604c7e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b3004a700e0ab15a1f42074c3be64b63da7ec25d | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/644feb1bfad95d8bbb39bcaa1f6382f965e39fdd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95a19a1f03a0912ffb16557b66ac0126ed46e551 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d221fe173ee155743e32b98bf05f7aebf1e26fec | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10dcdb66e756fd4d8e7c77c504ae8357616c2c42 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a45c545789028cb13c7e27e6630daff3487c543 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c633bd7d3ef5a69927d3c93754cfe783d6d2181 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae1d98b803bc2890ed9e8feba741bb5e10bc3c36 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e897d293e53fb2aad5232cb236b547dd43924848 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9722a67511e895a74d78ee8db051af8b39945192 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc184ebe9d79f4ce7e1e47cccb62d6945b79381e | or1k | glibmm-2.68.2 | NOK | http://autobuild.buildroot.net/results/c6f22c12de8d08576f451d8951b385319b5040b8 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/6c24501f1fce84c6653855d392e682730888fc0f | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a57ccffcbfce43518dd3f7fcad96260d7134a56d | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/bf839cdb52fb36eb68c890e2127ef6d3052a4038 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/008b257738d8f97ddbc9948d5fe49c108aa0ea3d | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/64a54c4721d0553334b5e5fb84ed40b5059580c7 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/87a9fa520cc563a72aa0e58b5476dc8ca5063ef1 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/53ad6dc053dd8e50c4fe48b758e08c0e70048d37 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/2714e1a99f2b0f3d69132b61d9da696d1eee44ed | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8589b19056f3d3cc5be3d595099e8e769997b60d | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/ada53ddedb3949787d012d815fedf9b46b117f82 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/f33caa077069d245821d58fb30959d705f839189 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/838b0b9ca8bf526ecbf14a3edee6d43a7dc790ca | i686 | hawktracer-2ec19d7192334414... | NOK | http://autobuild.buildroot.net/results/c356073750963a5998c0419c258e1a8846a9d6f0 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d7df3789a9aec61d212144aad37271699426c0f4 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/23651f9197edc9bb08c054afdaf37385b934ca92 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/96d6f5f5bff6d9ee9600389c8f1c0348cd798bdd | x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bc9b1a6f0af7503857d50a94bd1c91f4a2d775be | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d197145164c41549feb5954556b213ac3dccc7d8 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6eb3df8ece964d52f4c31f528e9c392d6ffb0d09 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2b237ac6b776d22efbf2a8dc350ce70f59790216 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ee768e8cb250ba9eef50d90522f78ce310fcf087 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/062b9c142238de7f839664b0e5334abd50bf5aa9 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c1a81184abcb6d975304194e70503e45dc7d69f5 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/17cd61c1ef1edfa2fa4e383e5a27ad0372331373 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1da3bdde35ec869d1e7bb1e84571c9a2a8f550d4 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b8e8c8280cb9f78eb7e906fb83f50029c08ec16 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/45e319116161d933570f73048f725345b5e8c7ce | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/238dcff45bcb9ba41c48416c92ee6b89fce82663 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/84016a6ddea8082b3505118a7212a56617d4fefe | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1d8ef493e9e598d39768b19bca2ef639e6515015 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1acf3879bbc794153bb71ee05a60457e53d3cfe5 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bcadece65f023a7094b239158f64b6c8bde4e5ff | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1b8126de7e02f6bc22d08b4a778022e6ea73bb3a | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/98bcb8c41c0182776ee4d396f030b6bdfb4a3032 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/64579724bf961e758c3b16826a9bf1439c56c6fc | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89adc2fba42ce9adb6b8a3a6226c51e85d4c0b5a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/23d0d972ba480c97ff141ac0931b2f547a828283 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d6b0d69cc7a708f24f82290f82426fe7f7956b36 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a1e567c65ee7a39bc7b4039def94b5ae908b6d10 | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/a710d3d57aba2faf004db3dccde413356b762444 | riscv64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/269a5d402fa945cc9054a8d2c8bf8e2a92e16084 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a8c72e3d951258902c8e471be8fc107f57f1b724 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d0f89bf458e3d1bf93a60e1a8260c01c289fceb3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a38ca97af144e8f94f01aa1473524859a3e0ec5 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/be0f0173b7afcf0c6ef384dff0d0c5193f006710 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b306483aa4c71ea2cdd504070c041149b92e4e7a | armeb | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/d4b456eda263fba50bef9c9e84d0662eccadc11c | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/09bec822b03770327baed077c7cca15f6e430dbb | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/39558d541457f34775e19595eb689b1a0c138aaf | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1c0543df6eeeac8b897ffce5589eae47ca90a748 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/31f48f3a7f5448c9365679f08033124681b41fe8 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1b56337d3bc629c56df550c2edeffaa24ad96864 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f72b84aefe20c1a01b2a9e2307fd737a21b890fa | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/36cb60e5016cd40b685c2d5f51a003944bd2196b | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3c5f25bc848967297e2eb66b1539e5e0536bcb5b | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/501a6208580d1d7672ffbd060eb61fd20cd3084f | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a5b3b32a40a4f8135b620319ff63129430bda588 | aarch64 | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/8b7f5edbe96f1f41e7fe653e52ea8e0ad9045110 | mips64el | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/428b769b18e4b87e6d197709caf1a4f11ac686ae | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0d923a3312157070c117464adc56b15d23cf62f6 | powerpc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/63a8e34b44a830c4135052caa3b6e571adc8cea1 | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0fcaa47d16ff917b549ce6156db1ccb87b7d4e13 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/cd78f541564a119274b21e03ad7f5774e258b5e6 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a3394795ad5d56337e33e09f29cdec1ea7cd5cf2 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f730e10d15eab108c958d8cf36225725f83b45b1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/29727070465f44b1747d45915c45bcf91b71ba18 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/762f5b6b1244fd321133bee0e34deca53ef48d2a | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/81a2f8beca553f3fdab5cc7eba5e62440f92f641 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8b9bd74bfba81d3d0567dcb8cb136f03b64ca77e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7a1f661965c4268d502bbfd437891b6867a480fd | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2036c091f6bb6a072d2e8e9d42c796c3c9149758 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5f6ec8b594b03e8f1e3d398ebc2f08b32c19d89 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/56a2ade0fa9b05536279af4a548edb1740d47b15 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d469237d5108533c75594e8cfaf2a51d9559741c | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed502335322c61a138490de61ead0a39f369dbe7 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7f78ffb7a6731e976e826b996941d2fa18216547 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/94a6950cb659ba352ca4044d9f74639b1437b3ef | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/20007fdd7343c783eaed3574fad747e21164f34b | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7cc6112b92d1a6cf6424836c7be929e79730b9d5 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b0c1d3aad56e66eae71af22cf017f4c613bfba8 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6405f46818ae63054bec4cd245377064746e0e78 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1bd1994481b537415bf89dc42943b7067015cfac | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/12e91668e67334b13465b5baa46853bb096284fd | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7a9c8a914fd76cb52910171fdb1e75e1032350ed | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/8ba164e8253e6a688c7c102f758e00d96ec03c09 | ORPH riscv64 | host-util-linux-2.38 | NOK | http://autobuild.buildroot.net/results/52664bfde4b73fd6e6d56b19a5df916c91b0f359 | ORPH aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/adbc27305550e6fc2f2450cd630675d4eae24cfd | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0b7d87044d83e43e5b0e01f1f2b4f8d03d633b29 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a30aae483bebb12b15332fc5b42d53ea406892f4 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cddb4dfc1cae9101f1b54e09bfdf5053379ac46f | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/24443a24116bbaafa47dd8880951a1b8395c7b1f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/465c8648026545912e8b27d0ebdf2ec4b2fe5bb9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/eb697e8a8e15cf3553571e767996ce2e8ccd3496 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/489797c0c3f154456008b65a5418334d6a56f4d2 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c6168bf8d93661b693fcce0b9c57c83295ecb2f6 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8b12331319c2111718ca2a3e4eedab441310ca7d | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cf9fe32b2c368c2c3bb579b06cdc89b9e4bbe68 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/f44007acf4463b5b11a1358baffa8393464354ae | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/a40f5aafd3baf648cdb0a7347925356045631569 | riscv64 | lapack-3.10.1 | NOK | http://autobuild.buildroot.net/results/122ce02350406d8c6aa692d81bd16cf09508dd91 | armeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aa46c9135561375edfa9a067dcccbeee80eb9384 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4b06cdb299f55c7c3fcf31502ecd59e3c2a911c3 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dbaaf1d57f1bdc29bcc31b9ca184c69ea782b590 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e4fcc38eb122b63fcbe67d886e1d3ed2e8befa53 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dcb80bc9568b8f102726923c449088e5575383b7 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4be479f881fa28691393ca33ffb09cb92e83cb44 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/98948a0c73f755f6f1d5572b35eba60d6652395e | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1ac495dd97bd801da4640b36ddd4e1e6d0efed2d | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b251046479f64fdc74f7fdbfd09bec90610ae6a3 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/13653bb18b83dd37c2bf64dd8ef2c961f9f261a0 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4e14ecc579975b92a937bef6ed1c619a10fa4cbf | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/426031fa433bda4ee08f8cac71b3d8d4748b870f | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/98054853aeaf6205be9ce7a5b69461ee9ea8ca56 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/140f742613994672c369042cd64370018b70e454 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7e51509adc062c80121d36cbd040f7defd4ca772 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b40b53849a46d22a2fc57dcd1257065215d22cec | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b5bcfc440822d07b8cd11b30d5ad2f7c0be1c436 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9bcdceb572484f8a14ef50ad38f2a5b24f876fb6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b20db550f713968d403a2840683218542753a445 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b556a0b89199986778bf26438901b1ea640c3f45 | microblaze | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/960c98eba5606ba61f52477a6de1a266f037c020 | ORPH arm | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/f523dbdab67c1db33632c9fcced6302d0563b5a3 | ORPH armeb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/61e474d00a7de8fb1acff9ffdee768b7edba0925 | mips64el | libopenh264-2.2.0 | NOK | http://autobuild.buildroot.net/results/33e39b33ac1499e66b21e99785e0026a8eab58ed | or1k | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/8386318c1c20ad5066fe90cad384331fc1296d5c | aarch64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/31715bf0a3724d07a74c5ede5d91bc3dc13190d7 | mips64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/6ed8ef43a37906a4d1e3675fed2a4defbcba883a | arceb | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/48d69803ac3703898da5de0a27fb381b1c4ab7a4 | mips64el | libuhttpd-3.14.1 | NOK | http://autobuild.buildroot.net/results/f428fccbda0aad7e81a8f6a58f6deea04da68504 | powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/a5f040ce4fe5d0b1294e118bcae4e73418300cc6 | sh4eb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a3b162613c19e9f4a0a895b278e9c98233c30990 | ORPH mips64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3bf645a3cd198cfdd2657d2bb88e4f260dff5bcb | ORPH microblazeel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8ac169dfb36fbf62a86b00afba6bd265c55e42d2 | ORPH arceb | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/6a7ba136817b7e43dff944ed34433a8afd7f4626 | ORPH i586 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/27c33fd3b73b3e267793a598aee5a94f0f79bbd9 | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bdf60e92a0469f89bdb6a24db6ace43517a946d0 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/14f11c085ece2148de93bee5103c34decbd3028d | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bd1bed3fcc284b19a78dfc321c3ab1085961e55b | ORPH s390x | linux-6.0 | NOK | http://autobuild.buildroot.net/results/63dc74d21b1a7d14b520fc7ee50f6c7719136fbb | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/81bd3d3164bd32e8ba5cd0275cb0835b51f23f52 | ORPH i686 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/d7c2383515b0d9d45b3398e270da3ff2af922eb6 | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/a92e0d7fefbfc3f800d1ab711d7834096a6aec5f | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c7df19ad9104d7173a7171aeb38b13feeaa4ed3c | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/aeae7a6675e7877862a77412e7df8335b532d113 | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/151f1a4a7bb658a1b75251b1cd828d8fd78ec5bc | ORPH x86_64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c520606577bd7822ec733fdbd03b51a60d42ae2b | ORPH s390x | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/b4efabddcf8c4408c433b5cc043cbd3dcde92d28 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/80ca504ec55ae2f38303376ee99a5824e45dd8ed | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/568e34f2f696af9595cac358026cef399378dc8c | ORPH mips64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/9e304354471f866e8016d472ccc4aa95ad703905 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/2690b22bbf2a83025689094027814f1d0dbe98e7 | ORPH riscv64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b04cd2c0aeea419096ee233ae8568361d690230a | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/aa4daf3d6126570d2ec7cdd5fd3b5aac4bbbe55a | ORPH or1k | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/7645948fe9cec15b6f510b1521bdb3db2247a77b | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/2a6544a5d789fcf75a0c7a96f0cfa69760d0f1d6 | nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/53ba7a9fc655b135e33974f9a2dc0fd1ebfaca5d | aarch64 | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/5d24d2bfa7ede5a756ab6e0b9ceae59f9387f86a | ORPH microblazeel | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/fc55703a70be76c46800c1942028a292c9c30912 | ORPH or1k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/9f6e28cbc448a683e42869e10d6ea6679146d3ed | ORPH mips64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/56ce9ac1aabae2d15df1dd26dbcd2f4fb0c366ec | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/173ee60cee40a02f3ff8bc7f53d366d2a7555989 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/06217a1bae3893f16c210254be190d001b4cf1d1 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b03f52fb470511afab545848c042c8778672cd3f | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/4ba4bb3d671d5eeceef1299ceee91b8b51b5352f | ORPH arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/edad6a0f467a54c6bdb5da19c6deec69f10d974a | ORPH arm | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/168c5785f14a2f8777e79f1ab1b74a25fb48ddbf | sh4eb | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/66990d287d6c007b9961e1c2f673ef3e4969b3d0 | ORPH i686 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/115bcfd6d2dd8af8b872f9fb3406e393a13e6833 | ORPH riscv32 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/de7b6147fd6525d45234a84f16fac6997f91f322 | ORPH or1k | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/f644ae349ac7b9a87c6d6a23816da16124a84230 | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/0779b59e58aafd0e4f1a3a60d7e3f9941312a18a | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/5b541874d2536aab3d3f69774019b5e201470d57 | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/3233230c7154692c16ec19dd4435426ce30f1b0f | ORPH sh4eb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/0f40a7594320cc7c9a6613c10fe1b30f3558c816 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ac981fa73cf67c2fa5b3a47a29efada9687e4c9f | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ad9a2d27ae3b3658a38edf9f8af49f1385e16c6a | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/79ea197ba3c35c1a8e838bcbaa04e47ac67ee5ec | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/123a943ce6c8ff9bab1f79aca9830c1030d488d5 | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/8065094d6401fceb5154d3054a00a3a401c5b844 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/d4297cc16c65e789dec54cbef974821fda84a08e | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/43adb005f0c041a51ecd41d0de683f9880b93e82 | ORPH mips64 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/366c0b059c0ebec280cae2adaae4fb47279fe641 | ORPH sh4 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/7b060760505f529b3ba827cc314d1f7bf9e98fe3 | powerpc | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/775d5969082d8f3dfa6a5f8ed78691be00cc1485 | aarch64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/7ac6bba222f3170ea19948f1d13acd8c5dcee4e8 | mips | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/56f9d33deac3739447429d04a56e00a2a8192782 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/68efe540a54475c6e8054fa426b23553ecd39022 | armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/fee079dd938b17d13afba5a8b78d3c929a4861fd | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3bd6379618871c770eb1c2d91fbb1f10f8ecb7bc | microblazeel | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/099e5dc008a2505b71ce687459162065a51b590b | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/1ac7961cb00389dc9341d3ab3abfb6b482eb4428 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/feda937dbb1401355662a806299a4ff40c9dc93f | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/fc822694b5eb54c0ed181dd5dc0f93ab2286ac47 | i586 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/682ea68d426a05371cd48b9c5acfda1081d5f0d0 | powerpc64le | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/9e21bcaafe903391e6c0fe6f149e30f158620b9f | microblazeel | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/ab5134e68c1df0ebaca930860d21c1bd15d7e49f | sparc | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/e440b4b221d54a8bb536930927954711be4cffd0 | sh4a | sqlite-3.39.2 | NOK | http://autobuild.buildroot.net/results/999b4284a5a2652f77047aa91fef33afbd6a3325 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/e5278a93c47460cdf6f45d50305e4dd0dd4db65b | arceb | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/8bafd86876e4ea56dd9afbb02fc763261efb0c8c | ORPH aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9ee72675f9b9974d51da06b138b8265f904182b5 | riscv32 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/89424754af09047e3b45c7ae88f5b4568d7be3b7 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0f530490e8f211b6fd570a8468e1213a7098cb78 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5340cc36ad17cb3aa21fbab110e43e71108aa5d6 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6d21146f0a92c07436e1505dafbe906ceac21d5b | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/972ba5d706a38bbc602d1161b5e3d61cb4da0d23 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a4f952b22063de181aef6922ea21abd6d326c644 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4f10d9095eebd707f3b1c22eb9cb5d37dec05667 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/789090a8ef3689185446a3f7f5b74f55ecd9f7ec | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/75484f1334b91791e76a95b810fa2080957f52ea | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e666fbf866bef8251736c4a41f57382b4f52a0ec | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/37b96267ceff449780a17c6d580480b5c28d4151 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd4af665459a2d55dd8fdb9235773c25f8cb976d | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/108dddd015629cf7b03f434bf00fec52813c32d7 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/53161cde33cdc8c40a5d34e0b11724fee9889fd6 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f3de9fd9a53260c88b8a5deec5368692a462a23f | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/96b5581d8558753081d263f5c683bed211482587 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4372edb3be1850f955c84671724b6bb0a8951ef | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/24a65cdfefc71bce29a9dca32668de699489a80b | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8707cb8ebe3621f02bedfdac82565a2b216cc369 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/60c861f7a0afac1f51480812483faa0c7ae9a8b8 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8d76fce85c82407fa44a5c8860e1418ff5b380fc | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8584697c220502f74239094ffdc9912c45b2919c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f7eb722e54447c6a0b839efa29473caf1afed737 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f70f4ca90fe39fa1112348730766f9235fddb34e | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c24f3817cecf6281d537dd042233e37b620f7444 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9d0bf990f58245751113db49e4bfd4ce2cc38655 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a1c9ddf5ca27c6041719218ece5e483391ac7490 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8fe68bd01894e374ed93e743ec44964fd173b23a | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c338c46d376960bb0fb147800d2ef26ca3d28888 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9a0ca76a692ed2e3f3159ccb642e3c846551e69e | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b8d8b4fdb04ea2e5613afb43fce0538009842c69 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7de423c059664041f3db6027db67e766a239f583 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e5cd132db83172d1ab9d7b1cd7935f02a96e343 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/8ef48217ae8dbf486faf38101217bbd171d69425 | microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/f73bc79523fc1a51548719c6697bb43869f7a755 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/676dc2813f2e39572f496e2fb5a547d8a760a5e9 | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/4ce788068aa4a36cbedd6843b7c89abdf42c5d21 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b1f822fd1ea93b76850d42fc88477ad29bf6ffb4 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/67ea21b7d8e0977d5672e2f62c4875c628e0517f | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/8a81af234493985a84f811319aa3bfa3a6d0b8ad | ORPH mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/be8b917109601f4184cf2787dfc13282f336a174 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/51576c9463deade1debc123c786368c24750f01e | armeb | unknown | NOK | http://autobuild.buildroot.net/results/78ba9c4a4e524857834f463398371ba18fc49ee6 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/cc6e142b99bec1354f2ee4d4cd0a2c93d3ab7d59 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/bdd60233019fb6386f0608f7e893d69514385ae3 | mips | unknown | NOK | http://autobuild.buildroot.net/results/2ccbaa767c965b1a258af8f050075ba945edac83 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/6a4324ee25e235cc33149dd45d1e36113032f08b | sparc64 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/38126e3e76573791af11475b31faadac42d20dbd | ORPH mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/ee5846cd9673efb11a4eca9dfbc281ed648041f8 | ORPH mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/41bbcd61fcbce14cfbb27e530a19faa79a54a05c | ORPH microblazeel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/9098b6348b737248de96a1a5e9703a044b988fc0 | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/724bb26531263a2591f4af43d1039f342d37aaf9 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/85864e8b05551e6b2e7d5bbfa0b422ed2b52dcab | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/1cc77131f8b6f6651c43879e4385cd3ba272e9d8 | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/e295ae11d40974195f8e493414919de93b6f4d8c | powerpc64le | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/b312a91b70f25d40bf564bc7b20e777cd2f32a58 | mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/c756367c7db809df7f40fa1dda7fa3d557b276c2 | arm | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/cfc35a11c6ea28bc6ad75771f2b9be5c9811c821 | ORPH riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/6ab941b5a5d825ec0e6cb6dd6657d88bbb3563f5 | sh4a | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/d1eded87587f03c2ac591d80b278024b0cf49ca7 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/92d29db54940348a3f818712e3bd4097f6eb5a93 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/425c3364da33835c6c59f4a5efb923866fc4beec | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/aa09c810ff96df5513369af1ae9f98c2ba42b178 | Classification of failures by reason for 2022.02.x -------------------------------------------------- libcamera-1966b9a58436fab51... | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | libcamera-1966b9a58436fab51... | NOK | http://autobuild.buildroot.net/results/46254b0523fb8ae41462ae7327db844b414479f8 | riscv64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/056577b3a956fe8a9163eb65385ca9bb9116d697 | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-elf2flt-2021.08 | 2 host-rust-1.60.0 | 2 unknown | 2 xenomai-custom | 2 ffmpeg-4.4.2 | 1 host-pahole-73383b3a39afe86... | 1 igd2-for-linux-2.1 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arceb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/cfe9acb744b9ce1a2fd84e85a456c2fc812b7f0e | riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/29605a8e21437df8715330e9a382738f4ba7f355 | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/c096b276884826366f0da923134fa4b7b7138aa9 | ORPH armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9d94bb73102292cdbc6876f344d459c215cdfd27 | aarch64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/2e8a089b99280672ef6f1db7423359a6ccd44472 | sparc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/a77e5477b44d3421c2ba5346fd43b03671640be9 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/89732b432d7743adf158bf7a59b054176a7a70ec | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/90e5b7876c367f4e21671dc2bc1e4ed25b6ed032 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/84fc599197daf3e590bc2cd94eadc98b0ebfd4be | mips | xenomai-custom | NOK | http://autobuild.buildroot.net/results/116f995954cb2b543e73cb03896fa41628cfd7a1 | mips | xenomai-custom | NOK | http://autobuild.buildroot.net/results/ce47c34825decfa41ee63064c93f8e6b6f2f81f4 | Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 dc3dd-7.2.641 | 1 fontconfig-2.13.1 | 1 gerbera-1.10.0 | 1 host-go-1.18.6 | 1 host-pahole-73383b3a39afe86... | 1 ipmitool-1.8.18 | 1 pixman-0.40.0 | 1 vdr-2.6.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/a5f528301ac2d3e452b94a697786ab8c4477b74c | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/92e9a178fdde030f5f94099f8346e9e9ac2ae520 | ORPH aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ea013346ac183afd34f96aa010158c39245cac7d | aarch64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/6df50bf74e8c6442ca49db691b20c9fbe647ec02 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9207c2ed9871e5582e173165536d05e787d51daa | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/321ff3420cb464aecc419fd3d096e7756683e770 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b30d94c1eea3511d35128e460a2d7cdfecb883f | or1k | ipmitool-1.8.18 | NOK | http://autobuild.buildroot.net/results/30efa8281e802f3ebf53b41f6a7344afdfa7b4b3 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/f7ace0397d5f6132a4f63e11387c3db3d89d213a | arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/65c4f5f7149d403272bd91941ed6b4f39ed4b76a | Gitlab CI results for 2022-10-07 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229619 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229644 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229691 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229694 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229698 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229701 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229706 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229709 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229710 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229712 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229713 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229715 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229721 | freescale_imx6sxsabresd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229762 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229782 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229783 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229784 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229785 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229786 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229787 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229788 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229789 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229791 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229803 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229828 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229829 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229837 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229839 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229841 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229843 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229845 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229846 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229862 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229863 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229864 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229865 | octavo_osd32mp1_brk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229866 | octavo_osd32mp1_red | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229867 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229883 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229886 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229887 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229890 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229891 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229893 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229894 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229900 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229903 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229906 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229917 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229959 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229973 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229960 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229961 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229962 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229966 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229965 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229968 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229972 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229970 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229977 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229975 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229978 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229981 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229982 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229983 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229984 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229999 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230005 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230007 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230008 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230009 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230010 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230011 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230012 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230013 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230014 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230015 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230016 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230017 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230018 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230019 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230020 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230021 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230022 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230024 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230025 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230027 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230029 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230030 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230031 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230032 | -- http://autobuild.buildroot.net From james.hilliard1 at gmail.com Sat Oct 8 13:44:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 8 Oct 2022 07:44:14 -0600 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: fix build with kernels up to version 4.14 Message-ID: <20221008134414.1305025-1-james.hilliard1@gmail.com> Add patches fixing build on kernels up to version 4.14. Depend on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 as builds fail on 4.15 and newer currently. Signed-off-by: James Hilliard --- package/cryptodev/Config.in | 1 + ...gnal.h-include-on-linux-below-4.11.0.patch | 36 +++ ...functions-on-kernels-4.6.0-and-newer.patch | 222 ++++++++++++++++++ ...ssing-crypto_alloc_ablkcipher-symbol.patch | 35 +++ 4 files changed, 294 insertions(+) create mode 100644 package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch create mode 100644 package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch create mode 100644 package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch diff --git a/package/cryptodev/Config.in b/package/cryptodev/Config.in index d1e64498a8..e243cab6f0 100644 --- a/package/cryptodev/Config.in +++ b/package/cryptodev/Config.in @@ -28,6 +28,7 @@ config BR2_PACKAGE_CRYPTODEV_LINUX config BR2_PACKAGE_OCF_LINUX bool "ocf-linux" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 select BR2_PACKAGE_HAS_CRYPTODEV help OCF-Linux is a Linux port of the OpenBSD/FreeBSD Cryptographic diff --git a/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch b/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch new file mode 100644 index 0000000000..2517c19547 --- /dev/null +++ b/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch @@ -0,0 +1,36 @@ +From 9e361206c6f0c8e0f62449cdec3b277f96277cd6 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Fri, 7 Oct 2022 22:25:37 -0400 +Subject: [PATCH] Fix signal.h include on linux below 4.11.0 + +The linux/signal.h header was moved to linux/sched/signal.h as +of linux version 4.11.0. + +As such linux/sched/signal.h is not available on linux below 4.11.0. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718258/] +--- + ocf/crypto.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/ocf/crypto.c b/ocf/crypto.c +index 4e50328..5691b2a 100644 +--- a/ocf/crypto.c ++++ b/ocf/crypto.c +@@ -73,7 +73,11 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp E + #include + #include + #include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,11,0) ++#include ++#else + #include ++#endif + #include + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,4) + #include +-- +2.37.3 + diff --git a/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch b/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch new file mode 100644 index 0000000000..c82a878b21 --- /dev/null +++ b/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch @@ -0,0 +1,222 @@ +From 7dd718b7b6132c2e8e1e685b03c7b10c0658609e Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Sat, 8 Oct 2022 04:25:00 -0400 +Subject: [PATCH] Fix crypto_hash functions on kernels 4.6.0 and newer + +The legacy crypto_hash interface was removed as of kernel version +4.6.0, adapt this interface to be compatible with the replacement +crypto_shash interface. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718260/] +--- + ocf/cryptosoft.c | 185 +++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 185 insertions(+) + +diff --git a/ocf/cryptosoft.c b/ocf/cryptosoft.c +index caf9c06..d903b6e 100644 +--- a/ocf/cryptosoft.c ++++ b/ocf/cryptosoft.c +@@ -56,6 +56,9 @@ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29) + #include + #endif ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) ++#include ++#endif + + #include + #include +@@ -184,6 +187,188 @@ static struct kmem_cache *swcr_req_cache; + #define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode) + #define plain(X) #X , 0 + #else ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) ++ #define hash_desc shash_desc ++ #define crypto_free_hash crypto_free_shash ++ #define crypto_hash_tfm crypto_shash_tfm ++ #define crypto_alloc_hash crypto_alloc_shash ++ #define crypto_hash_digestsize crypto_shash_digestsize ++ #define crypto_hash_setkey crypto_shash_setkey ++ #define crypto_has_hash crypto_has_ahash ++ #define crypto_hash_cast(X) container_of(X, struct crypto_shash, base) ++ ++struct crypto_hash_walk { ++ char *data; ++ ++ unsigned int offset; ++ unsigned int alignmask; ++ ++ struct page *pg; ++ unsigned int entrylen; ++ ++ unsigned int total; ++ struct scatterlist *sg; ++ ++ unsigned int flags; ++}; ++ ++static int hash_walk_next(struct crypto_hash_walk *walk) ++{ ++ unsigned int alignmask = walk->alignmask; ++ unsigned int offset = walk->offset; ++ unsigned int nbytes = min(walk->entrylen, ++ ((unsigned int)(PAGE_SIZE)) - offset); ++ ++ if (walk->flags & CRYPTO_ALG_ASYNC) ++ walk->data = kmap(walk->pg); ++ else ++ walk->data = kmap_atomic(walk->pg); ++ walk->data += offset; ++ ++ if (offset & alignmask) { ++ unsigned int unaligned = alignmask + 1 - (offset & alignmask); ++ ++ if (nbytes > unaligned) ++ nbytes = unaligned; ++ } ++ ++ walk->entrylen -= nbytes; ++ return nbytes; ++} ++ ++static int hash_walk_new_entry(struct crypto_hash_walk *walk) ++{ ++ struct scatterlist *sg; ++ ++ sg = walk->sg; ++ walk->offset = sg->offset; ++ walk->pg = sg_page(walk->sg) + (walk->offset >> PAGE_SHIFT); ++ walk->offset = offset_in_page(walk->offset); ++ walk->entrylen = sg->length; ++ ++ if (walk->entrylen > walk->total) ++ walk->entrylen = walk->total; ++ walk->total -= walk->entrylen; ++ ++ return hash_walk_next(walk); ++} ++ ++static int crypto_hash_walk_first_compat(struct shash_desc *sdesc, ++ struct crypto_hash_walk *walk, ++ struct scatterlist *sg, unsigned int len) ++{ ++ walk->total = len; ++ ++ if (!walk->total) { ++ walk->entrylen = 0; ++ return 0; ++ } ++ ++ walk->alignmask = crypto_shash_alignmask(sdesc->tfm); ++ walk->sg = sg; ++ walk->flags = sdesc->flags & CRYPTO_TFM_REQ_MASK; ++ ++ return hash_walk_new_entry(walk); ++} ++ ++static inline void crypto_yield(u32 flags) ++{ ++ if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) ++ cond_resched(); ++} ++ ++static int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err) ++{ ++ unsigned int alignmask = walk->alignmask; ++ unsigned int nbytes = walk->entrylen; ++ ++ walk->data -= walk->offset; ++ ++ if (nbytes && walk->offset & alignmask && !err) { ++ walk->offset = ALIGN(walk->offset, alignmask + 1); ++ walk->data += walk->offset; ++ ++ nbytes = min(nbytes, ++ ((unsigned int)(PAGE_SIZE)) - walk->offset); ++ walk->entrylen -= nbytes; ++ ++ return nbytes; ++ } ++ ++ if (walk->flags & CRYPTO_ALG_ASYNC) ++ kunmap(walk->pg); ++ else { ++ kunmap_atomic(walk->data); ++ /* ++ * The may sleep test only makes sense for sync users. ++ * Async users don't need to sleep here anyway. ++ */ ++ crypto_yield(walk->flags); ++ } ++ ++ if (err) ++ return err; ++ ++ if (nbytes) { ++ walk->offset = 0; ++ walk->pg++; ++ return hash_walk_next(walk); ++ } ++ ++ if (!walk->total) ++ return 0; ++ ++ walk->sg = sg_next(walk->sg); ++ ++ return hash_walk_new_entry(walk); ++} ++ ++static int shash_compat_update(struct shash_desc *desc, struct scatterlist *sg, ++ unsigned int len) ++{ ++ struct crypto_hash_walk walk; ++ int nbytes; ++ ++ for (nbytes = crypto_hash_walk_first_compat(desc, &walk, sg, len); ++ nbytes > 0; nbytes = crypto_hash_walk_done(&walk, nbytes)) ++ nbytes = crypto_shash_update(desc, walk.data, nbytes); ++ ++ return nbytes; ++} ++ ++static int crypto_hash_digest(struct shash_desc *desc, struct scatterlist *sg, ++ unsigned int nbytes, u8 *out) ++{ ++ unsigned int offset = sg->offset; ++ int err; ++ ++ if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) { ++ void *data; ++ ++ desc->flags = desc->flags; ++ ++ data = kmap_atomic(sg_page(sg)); ++ err = crypto_shash_digest(desc, data + offset, nbytes, out); ++ kunmap_atomic(data); ++ crypto_yield(desc->flags); ++ goto out; ++ } ++ ++ err = crypto_shash_init(desc); ++ if (err) ++ goto out; ++ ++ err = shash_compat_update(desc, sg, nbytes); ++ if (err) ++ goto out; ++ ++ err = crypto_shash_final(desc, out); ++ ++out: ++ return err; ++} ++ ++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) */ + #define ecb(X) "ecb(" #X ")" , 0 + #define cbc(X) "cbc(" #X ")" , 0 + #define hmac(X) "hmac(" #X ")" , 0 +-- +2.37.3 + diff --git a/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch b/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch new file mode 100644 index 0000000000..7e420f6747 --- /dev/null +++ b/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch @@ -0,0 +1,35 @@ +From 3a847686f8a18a50149f2f3d4ed8a661ed507154 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Fri, 7 Oct 2022 22:44:58 -0400 +Subject: [PATCH] Fix missing crypto_alloc_ablkcipher symbol + +The crypto_alloc_ablkcipher symbol was removed as of linux +version 4.8.0. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718259/] +--- + ocf/cryptosoft.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/ocf/cryptosoft.c b/ocf/cryptosoft.c +index caf9c06..841d41e 100644 +--- a/ocf/cryptosoft.c ++++ b/ocf/cryptosoft.c +@@ -190,9 +190,11 @@ static struct kmem_cache *swcr_req_cache; + #define plain(X) #X , 0 + #endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ + ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) || LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0) ++#define crypto_alloc_ablkcipher(a,b,c) (NULL) ++#endif + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) + /* no ablkcipher in older kernels */ +-#define crypto_alloc_ablkcipher(a,b,c) (NULL) + #define crypto_ablkcipher_tfm(x) ((struct crypto_tfm *)(x)) + #define crypto_ablkcipher_set_flags(a, b) /* nop */ + #define crypto_ablkcipher_setkey(x, y, z) (-EINVAL) +-- +2.37.3 + -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 8 17:05:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 8 Oct 2022 19:05:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221008170508.62837-1-fontaine.fabrice@gmail.com> cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 8 17:36:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 8 Oct 2022 19:36:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221008173619.76606-1-fontaine.fabrice@gmail.com> cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 3454907bab..d9a7ed1519 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false -- 2.35.1 From peter at korsgaard.com Sat Oct 8 18:40:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 8 Oct 2022 20:40:16 +0200 Subject: [Buildroot] [PATCH] configs/visionfive_defconfig: new defconfig Message-ID: <20221008184016.2327196-1-peter@korsgaard.com> Add a defconfig for the Starfive VisionFive board, a board built around the Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (6.0 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3 and misses some variables, so we provide a uEnv.txt to fix that up, based on what is done in provided Fedora image. Signed-off-by: Peter Korsgaard --- DEVELOPERS | 2 ++ board/visionfive/genimage.cfg | 21 ++++++++++++ .../overlay/boot/extlinux/extlinux.conf | 4 +++ board/visionfive/overlay/boot/uEnv.txt | 15 +++++++++ board/visionfive/readme.txt | 32 +++++++++++++++++++ configs/visionfive_defconfig | 17 ++++++++++ 6 files changed, 91 insertions(+) create mode 100644 board/visionfive/genimage.cfg create mode 100644 board/visionfive/overlay/boot/extlinux/extlinux.conf create mode 100644 board/visionfive/overlay/boot/uEnv.txt create mode 100644 board/visionfive/readme.txt create mode 100644 configs/visionfive_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..bfde353c8a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2310,6 +2310,7 @@ F: board/openblocks/a6/ F: board/orangepi/ F: board/pandaboard/ F: board/roseapplepi/ +F: board/visionfive/ F: boot/shim/ F: boot/sun20i-d1-spl/ F: configs/avenger96_defconfig @@ -2324,6 +2325,7 @@ F: configs/orangepi_r1_defconfig F: configs/pandaboard_defconfig F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig +F: configs/visionfive_defconfig F: package/bats-core/ F: package/docker-compose/ F: package/dump1090/ diff --git a/board/visionfive/genimage.cfg b/board/visionfive/genimage.cfg new file mode 100644 index 0000000000..433387c901 --- /dev/null +++ b/board/visionfive/genimage.cfg @@ -0,0 +1,21 @@ +# Minimal SD card image for the Starfive VisionFive board + +image sdcard.img { + hdimage { + } + + # u-boot is hard coded to look at 3rd partition + partition dummy1 { + size = 512 + } + + partition dummy2 { + size = 512 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + } +} diff --git a/board/visionfive/overlay/boot/extlinux/extlinux.conf b/board/visionfive/overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..44ac6f7944 --- /dev/null +++ b/board/visionfive/overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label linux + kernel /boot/Image + devicetree /boot/jh7100-starfive-visionfive-v1.dtb + append console=ttyS0,115200 root=/dev/mmcblk0p3 diff --git a/board/visionfive/overlay/boot/uEnv.txt b/board/visionfive/overlay/boot/uEnv.txt new file mode 100644 index 0000000000..b831d2d230 --- /dev/null +++ b/board/visionfive/overlay/boot/uEnv.txt @@ -0,0 +1,15 @@ +fdt_high=0xffffffffffffffff +initrd_high=0xffffffffffffffff + +scriptaddr=0x88100000 +script_offset_f=0x1fff000 +script_size_f=0x1000 + +kernel_addr_r=0x84000000 +kernel_comp_addr_r=0x90000000 +kernel_comp_size=0x10000000 + +fdt_addr_r=0x88000000 +ramdisk_addr_r=0x88300000 + +bootcmd=devnum=0; run mmc_boot diff --git a/board/visionfive/readme.txt b/board/visionfive/readme.txt new file mode 100644 index 0000000000..7aefa24167 --- /dev/null +++ b/board/visionfive/readme.txt @@ -0,0 +1,32 @@ +Starfive VisionFive +=================== + +The VisionFive is a low-cost RISC-V 64-bit based platform, powered by a +Starfive JH7100 processor. + +https://doc-en.rvspace.org/Doc_Center/visionfive.html + +How to build +============ + +$ make visionfive_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Preparing the board +=================== + +Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). + +Insert your SD card. + +Power-up the board using an USB-C cable. diff --git a/configs/visionfive_defconfig b/configs/visionfive_defconfig new file mode 100644 index 0000000000..9f5fb03610 --- /dev/null +++ b/configs/visionfive_defconfig @@ -0,0 +1,17 @@ +BR2_riscv=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/visionfive/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/visionfive/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,cfcb617265422c0af0ae5bc9688dceba2d10b27a)/linux-cfcb617265422c0af0ae5bc9688dceba2d10b27a.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="visionfive" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-starfive-visionfive-v1" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.30.2 From fontaine.fabrice at gmail.com Sat Oct 8 22:07:16 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 00:07:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221008220716.150449-1-fontaine.fabrice@gmail.com> cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 00fb7d9842..12e5ca7af4 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.8.0 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 8 22:19:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 00:19:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables Message-ID: <20221008221908.156459-1-fontaine.fabrice@gmail.com> cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 9 06:39:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 09 Oct 2022 06:39:07 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-08 Message-ID: <20221009063914.A2232401FB@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-08 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 11 | 2 | 0 | 13 | 2022.05.x | 14 | 14 | 0 | 28 | 2022.08.x | 14 | 22 | 0 | 36 | master | 157 | 375 | 8 | 540 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 22 sysvinit-2.99 | 17 crun-1.5 | 15 host-sentry-cli-1.59.0 | 15 ocf-linux-20171122 | 14 libarchive-3.6.1 | 12 linux-6.0 | 12 igd2-for-linux-2.1 | 11 autofs-5.1.8 | 9 brltty | 8 host-f2fs-tools-1.15.0 | 8 libglib2-2.72.3 | 8 gensio-2.5.5 | 7 host-binutils-2.38 | 7 btrfs-progs-5.16.2 | 6 dash-0.5.11.5 | 6 gerbera-1.10.0 | 6 host-go-1.19.1 | 6 perl-5.34.1 | 6 batman-adv-2021.4 | 5 dahdi-linux-5c840cf43838e06... | 5 host-gcc-final-11.3.0 | 5 host-pahole-73383b3a39afe86... | 5 linux-pam-1.5.2 | 5 systemd-250.4 | 5 casync-4ad9bcb94bc83ff36cfc... | 4 efivar-38 | 4 elfutils-0.186 | 4 hdparm-9.63 | 4 php-8.1.9 | 4 unknown | 4 fdk-aac-2.0.2 | 3 file-5.41 | 3 gobject-introspection-1.72.0 | 3 host-binutils-2.37 | 3 host-rust-1.64.0 | 3 libgpg-error-1.45 | 3 linux-5.10.145-cip17 | 3 lxc-4.0.12 | 3 openpgm-5-3-128 | 3 python3-3.10.7 | 3 uqmi-0a19b5b77140465c29e2af... | 3 acpid-2.0.33 | 2 azure-iot-sdk-c-LTS_07_2022... | 2 bind-9.16.31 | 2 cryptodev-linux-1.12 | 2 dmalloc-5.6.5 | 2 host-binutils-2.39 | 2 host-gdb-arc-2020.09-releas... | 2 jack2-1.9.20 | 2 libcap-ng-0.8.3 | 2 libglvnd-1.4.0 | 2 mariadb-10.3.36 | 2 moby-buildkit-0.10.0 | 2 open62541-v1.3.3 | 2 s6-portable-utils-2.2.3.2 | 2 tealdeer-1.5.0 | 2 toolchain-external-codescap... | 2 uhd-4.3.0.0 | 2 xenomai-3.0.10 | 2 xfsprogs-5.14.2 | 2 zstd-1.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 4th-3.64.1 | 1 a10disp-0.6.1 | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 augeas-1.12.0 | 1 binutils-arc-2020.09-release | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 containerd-1.6.8 | 1 cppcms-2.0.0-beta2 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /tm... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fwts-22.09.00 | 1 gmp-6.2.1 | 1 host-gcc-initial-11.3.0 | 1 host-gcc-initial-12.2.0 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 ipmitool-1_8_19 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libcamera-ba6435930f08e802c... | 1 libnl-3.6.0 | 1 libnss-3.83 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 linux-5.10.145-cip17-rt7 | 1 ltp-testsuite-20220930 | 1 lttng-tools-2.13.2 | 1 make: *** Waiting for unfin... | 1 mesa3d-22.1.6 | 1 netsurf-3.10 | 1 openal-1.22.0 | 1 openblas-0.3.21 | 1 openssh-9.0p1 | 1 package/qt6/qt6base/qt6base... | 1 pv-1.6.20 | 1 python-orjson-3.7.11 | 1 qt-webkit-kiosk-a7720e50f2b... | 1 reaver-1.6.6 | 1 refpolicy-2.20220106 | 1 sconeserver-8d1935919a20133... | 1 uclibc-ng-test-0844445e7358... | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 x264-baee400fa9ced6f5481a72... | 1 xvisor-0.3.1 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 zip-3.0 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- i686 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e23e5ca46df6e138771b37a1c4a46216591d2887 | or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/c0ee998f550f90f0aba21eb7bfdfba60e4461814 | mips64 | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/74e26c8bd78be0ffdec814ee196856897c491326 | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/32c661b62b9a6341b8ae19876344194538237652 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/7a222291acdb03468af1948ddf7294a3389cb5d7 | ORPH mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/78dc0c70811dd9d1badd30a5b1659a18251c201e | ORPH mips64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/ca996ba7af04864b7af28dc94d18afde42d6d054 | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/c160845944ac1da0a8ccaac3930a2286283cf985 | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/e1b9825fc8c833cbc98d7f0080fc42ad9034a183 | ORPH sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9c5bc055ccd5b7cc0f3d6b048995bafda5aefca5 | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a75f5deb6419055d5fa6965ba8e09d63ff883b85 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d2e999d2a8856246f7a9f259535adf6204bab389 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/874340745f087eddb954d37109a3705e208522d7 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/75a7dfd2f2e0914c0d1bd6775b4dddc177a36628 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7653fe6a2619148a71dfe8602eb6de98c77845ec | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8c8d99d2298f85db200879850f8fc7fee540a7bf | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/90412a15eddf12f5ba67f4de7c9f6a8448c5d36c | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6a6da5d33903f6950c12709a12843aae2199eeba | sparc | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/5de776d70191e8cf9ce52614ada430a5507ea51e | riscv64 | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/1633276e5a89982ce89faeae311a60c1f461ab0a | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/bd553420e4eb0dbe7dd3be9c8c6923c45444d0fa | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/7a9ccf310b1b3ab54a2e12bf3a03c7e2a8a1a37b | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/38c0a90821f5fd06b3d6bb42ef46246a1362cf25 | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/054ba624e8805d01acc2ffbc25a35327d81b4a6e | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/7cc67db5fb8c965b6b2f3fc40aaeb9f08a376706 | or1k | bind-9.16.31 | NOK | http://autobuild.buildroot.net/results/b32930f9cefe101af3d51d5590ee2367b5881a1b | ORPH sh4 | bind-9.16.31 | NOK | http://autobuild.buildroot.net/results/80ce5f34cd246f081538bf89705ab606518c4e1b | ORPH arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/dfaa69d7da8385bf36a56e2ac36f13e3d766ebd2 | sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/7aa2b3ba85d48e17e5991dd978e796c176440db0 | aarch64_be | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/ad1e4b8208f70c4385d8f716aa7de631cbd55300 | ORPH mips | brltty | TIM | http://autobuild.buildroot.net/results/ca764fa1cc73d9a3bba7c5900235643fbc125a30 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/003d975fc80c289efe8ade781c1ee8f85c44ff33 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/1c4fba03f14ed9b54da965cb4a9922f33232f277 | arm | brltty | TIM | http://autobuild.buildroot.net/results/e2b091215f3d72e3cecc9f71abb3352ae02e1853 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/be8fdd45c19192c0f5c82dac648fd269300b7184 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/1af2ff23f97f014ca3b5493ba0ac8c29fc7877d2 | sh4eb | brltty | TIM | http://autobuild.buildroot.net/results/d47589e205bcbb6586580cfa5bef3da92b17c2b8 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/9b5d603de2a87e50ece439e8c025446fdd503c9e | aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e74337ed6ed3041edf1801dd5d9e4c98f316e2f6 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f07af17cbaaeae48094ed6664fce57200f37c650 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a99d7ca3388fdbaa3e30ec4e6fa52f0ac2379199 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4a03d07e5935dab19fa16ab217cd9865f5cb9abf | ORPH riscv64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/12552f380fc1369ef2b1b7b1cdd0493674c23913 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1b2dbb0253618356a41e37e8364091992f41d2f0 | ORPH nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5671fb27ab4c7a721a8d1e5043ede0d07ca25aa5 | mipsel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/403994094d7c97a6c70f9f096add534b4b698a54 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4a2782e89ff04a2e9f2b70b1be39ebc9915bc81e | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/31c4cb85403e09dc752c317a35f5ada0acd20c0c | x86_64 | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/05a81b3434d8897a6bf3ca4add6debe3f1ff103d | nios2 | cppcms-2.0.0-beta2 | NOK | http://autobuild.buildroot.net/results/1d8813f7cacc8e60fdea40c45c938f5fec201d40 | ORPH s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b72b1fd2cb02204e2cde26e93418fd7778d2eb8f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/be779b7fc656c8fa4805e8d7583446883527c847 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8b141b090ff140fe94e42cb351cae7efd203ef7b | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0d6a3e4df1a6a368a80033d9628aae2a1b2c7465 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eb0b78e97e974ddc3757d9e04029493d98209e9c | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/995eb512cbe702b98fa384a5aca883856c1375ec | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ddb0b41e9c1642a27afde88f05398840202cc272 | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0e9f2d27cef9ba7807ce7acbd9542897cc6c4229 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d8cf6c3da0082ba39b460ad15a4ce0b5923de186 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c90c0ba228dfdcd3d0014d99a65e3f3697a7230f | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6f0cfc6f2cad45e5c2209344b101c64f8bed7846 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/215370ff44d15de24240bfd6f7c221a5d237ac0c | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d2a1514ba40eaf2a0060f06953aad0de5d608823 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/90818c1a2e5383467154244e769d53ae2efe6607 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d26e1b92a62b8483b8d74bf47c3ffcffd79eaa69 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/ae42dc6623be223555034c58b5d3c315050d5186 | ORPH mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/5f6950fc8d9270cd33f4cac067657dd9b1fcd1c2 | ORPH aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/6dde82ecad14af1e16b590b65ccc8d63f4a507ec | x86_64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/168ffb9fa156176c1148ab5ea32e9a36df35b21b | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/45b7af4dd74708367519e036d27fe04191db0221 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3d7e654510d9f4aa748983696cbb707497ea8edd | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/293ed91950bca48c7a4886c2cf0741194ca97498 | sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/00a9e48244b202a8467410b9cfd031bf0710481c | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/ec3dd9830777f0fea984dea6a43dbe6e6be7d597 | ORPH armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7ad90e1c9b49a07ee1b559f8a543ef022d15e3f6 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7a9eb8cd67f1279a551bfe81c94d50999cbe9758 | ORPH powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8cff86cb9d1ba6f6d0f218f8b0f24ae8da514c14 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7d52cf5c864a9277e069c16b5cc1735861bac171 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/ac41425022d102698cbd5752751c0ca99b796bfd | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/3d252a4f2d155c29333e3564fb086bac6f8b14bf | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/cc3ee99bfdb4d52c028d50c1cb48dc009d6afeba | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/c49d894b109d68e2624074eab8b939fefa3b42ef | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/7c68aac0f18c8c3dfeba382018b05716cab91745 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d1fa1ddad9afec45b5f11b5e9a396c7a31307ec | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f3a17ab2c283989a12a50412dbd91d0f2fa407fc | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/479c752f0b018db22113802011da2751a1322aba | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3d04abae742acc850a67853b3eb3b2eb75ab95ac | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/9260d770544322994c116d90da4c3ff26b6ddbba | ORPH mips64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/262b1826a22127007d5e2c9ef95c84825aca5a6d | aarch64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/0e376b0e1c10ee19ef69860c51ffbafaabbcad6b | mips64el | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/063f57a58dbb1fca941d6e45dda970a714279d88 | mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/42ef768806ce6fdeb795e06cd8d1691b8c2b4a47 | ORPH i686 | file-5.41 | NOK | http://autobuild.buildroot.net/results/519575a4d39e1684f55f554fd9181aabfaf76acc | ORPH i686 | file-5.41 | NOK | http://autobuild.buildroot.net/results/5386cc99d8847763b730365f6e391209338cb669 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/52d42e3733c43d4dff7e9abff9ffd7895fc4f493 | mips64el | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/89393f7af8a56f2488d0183ca886e967757b0c5f | nios2 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/a95913663329c700aec3790b5d6e22455a5bc112 | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/15f2d04344d9e2defcf43f11afcfae5641cc1d03 | powerpc | fs/cramfs/cramfs.mk:46: /tm... | NOK | http://autobuild.buildroot.net/results/a00b5e8c34863ff817e47bb2d3b12bf3ddf5409a | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/9b8950e1eef9b4cf81265f332a4f3a006c9098a6 | sh4aeb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/cdf63cd17bb5701541dd8e87134e7d6919f555db | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/f7a5d0bbf64365a19006c6e7098fac0ebe8408a3 | riscv64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/3079212a710abc635556c6e1eb95c2dddf94d4ff | s390x | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/693a1e362c2bfc0d2d7be9afe36a6aa20924f6f7 | mipsel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/34a60b786f449e3baaa45812abbfdac2e76acb12 | nios2 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/cde4c9414d236bc77be4aed50c2dc93116d0d1b9 | i686 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/bfa53d7e4338985c0d0df4b48c73fbd4a108b323 | mipsel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1463bef671f7494e6bf528a4cade9117179bef5e | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1621a08d0652ee625e73d5da7f4dc18034df3a3c | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/786694e5eb5bfb7302ec2d70610981896327054c | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8d2844704cd4eebb4add21bcccb14207a360b3bf | armeb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/46d241cdc0157a6e2da65651511af49e6b079a8a | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/520df7caabc33b0da1ee7502b1e36064c024735b | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/37d3122b9cc11ac1cf5583bd0f6d26713c2ab376 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6674651f5b64c7dacb2957a8f533dc2104466f42 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5c0ec8e3e6a04b4facc3c2b3e44c643ca8724e8d | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fcb45e1eaa5d28c3747d3d6f76b5e6b74e94458d | s390x | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/560fcbae71a1aebc6e5faca983940be06d66c36a | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ffb5b1edaba146fcffe79fa569d0c6d8f488d8a7 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cfc8f7dcd68453a9950179c50d4dcfe732694167 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/879da7ff4415dd73650886a8daa0b9cbf19fec77 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c233f71ba54c822a5281cbf293acc5322ad9871 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0925f480614c9a6f6e35c29de501ff2b289da6dd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9b31f24aa37d180a135ae34517eb6e70873617d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edc4de2e9b99f90f1f6003763f48061d36ff8fd1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f0bd38866a778488094e9550142392fe0ea8110 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/35f6e0d412daf86e09a3abd987e7c570d9c2c23f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa7e13634a39b9f6566ec55b932b78e1fa03955b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20a751f0d703b46559d0f90e5af9fe1e654be345 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d0be152938da471baa69be765511a0c41f65412 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b269f466e2f04b540407eed374bb1d1532cb941 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/126f769cd3e1a051da1ace3da1f3230bbf546f71 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3101f0388f91d0044efaced6561f9b481066503 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7dcef902c4b6643c2dec0e82bb144dbd19494203 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a26cc349784f9d16be1276a25b86d12709aacc5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/24a5e23ed96089f0b5d69d429ad06e41aec0255b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9215b4e8ec73a438f4f0ec8dd38ef99fa2a09455 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0646d1107fe54948150fb9e8cf865801f6119eb | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/755baae6ad0775e7b139e667d2da391c902d3da8 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/acc608ee44da76caf6245af816dcd9d3d6ca025c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5655446e291a494894395ff9f51d2d6a77cc93e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f3ad2defd7e58ccaa73c0ae24d0bd1de15a4324 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/8def39661014e2033955516e3b44937719b8a63c | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6f727c9297ad73be8e22fbaab5151b3d3ba84b53 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/34690257caccca1ca15a8b1615a29d9ee3c48c9f | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e3e095af0ac42e7967e2f89e66d2727028109246 | ORPH mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/e057d923762adcbed9c7c78eeb9f9f77f0039b7c | aarch64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d231720e18fce19f11c4495e57efcaad9f72c57e | sh4a | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/83a3009c44caee5dc2ea6883b59ace5f3479c0e7 | mipsel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/babac8dd6ff964fced47c61ba171854c8c07f303 | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/706419004fc523b36f4f3b8fb2b1f32316ce0d0d | mips64el | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7527cd23b9593c7972d8148ccf526b6940532c87 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/2dae864520979ccca36ff89a6e840c6906fff26b | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/951e507b9e99cc07a86dcea581a90e12315f1ee5 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c8cbd2b75b83a5fe034206f6e8f88a38fad8e3d3 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7601282748aa16d7e1460bab0e75d3b5daf254be | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/80fece1c824848564f53f0a5616fb817e0fdc76a | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a59faef9ef3b2eac4da899721e0fe9ff3a98c35c | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/42844dd8c8c47252258c921406584910d59b2d41 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/90c5886858d8fdc52fa5b614db6e38363d8f48d2 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/620488080f70762cf46453d54562a1c53693d0f6 | mips | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b366a4e7676312a87af93f4be708c3ca16a3f1d0 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/29e2ce7c047fc0708803460234e38e4b96ee4dd0 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2718a3a1e18102e02601479ce4f2e7d260bff9a1 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/647e9c02d16e3c9b8c394f0151f6b99ec20e0f92 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/95934c04328b8fab54b928e93d1aad34b87dd940 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2ce864a5ab6822efca343a258df487e94702aef5 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0b1a920afbd5eb3eace292025d1580d6b9df497b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e8a9d4ddf5402e764862484c5d63737eab808b8a | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e8cdf4fbcefe04c20a751b218ed920ff620d9a99 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/21e4a24c0b9881c1f20708758292035b88e5ac66 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/204f251e742af44646bb24675e91b83c78c05923 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/12642723597fe941b620207c7f408001154cb21c | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6adc7908cebec0ef1ddaa723fd0d58b77eb097cf | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/668781586c9f9f41bae0c41f9464565e3a36f168 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b8da13212a1e5927594d0b09b3264b0752a7f605 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/7a51bac17002224b938950c512482131977b5ba6 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/be0ef1d40df290707589ab3bd8daf7fa125bf207 | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/01a42d8c29ac410f2231f5fc7c19610e7a804407 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/89558cb33f271205d38fc2393f9cb605d2a352bf | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2f7e161c6bbe1f546a1e5b537ee788d62dc72937 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/66754f41d9aca515135b9826da13e4f675090a33 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0784e2a2591489bcfa9d07dd720849f698f4530e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7b0f19a0170ab9121da283b82f459322fea3ad1f | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f7530dd65d648b06887c8d73d5f0530ad0f6ea10 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/13a476ac0fd9f596b413078a7fec58cd62417649 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/30bdd85584dd7b8aa78efcd20f84a750e69d563c | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2d2d29af6dda8e7b39b4bbbb248c322052913e58 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ddfc9627d2ba7b1a3f443e9eab528712fd57021d | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5c8cb78d9c18950602c6cba027068cb133a74032 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7962b875db59759c340bba87b01b0393fd62e239 | mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/752b0ee01cf1a0c0a9d5b11b8b11e4d242fa5139 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c0b215e6f63b737db945e2cbbb36aca2ce25727a | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b50f45d39eddbd214cc6fca247dd96ab94a6bd4f | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9fdd553007bdc5d56b307a1b7b59475a6111d4e6 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/604f364a677c3187f7da96ddb3317462017b1f92 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ee814e4022d2a690dd2409f81facca6e953e649c | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b7e88ada0e5020de5899a0ebe5f3b25b9db90359 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/65fae07b6462d540a32bb06de33c06b20d597d1e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d599204c7fd76eda4f8ba27bda2b3060f922c132 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/10f2789af75c0db28d746612ac4c2b3a26b644ff | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/580671ef1d37ebe67cdd16f4621a6b9523ec46ef | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2ba733cef6ec0db7fd8e034fa1a63089aba232d1 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c3a11c20bb0f99b258bdbaa9c150233d796fc353 | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f5379137626cd36c67e37a26b943b81d3856f557 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c8a225cb127031e66a171ed9cf96e64aa50d16bb | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cb55c6095c86a568d595a41a89f61b814f319255 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e28a7b5887fec9e56626063f3d0f9dbeedd75c9d | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fa4faf7e36a461336e2631a4da2933617afe5102 | ORPH or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/66d2a87fb90404b15de9320f2033c50d4e1a9ec4 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f1d488235f761013a35192b61606a18edcd0702e | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/49797c6a697167a15e3fb1922665e7ea804d89a6 | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cb54fd3ac6d735cf1404b75b4cf0b522cefacdc0 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3fb8f52f9ddf371e11424e3b1bf326ae2c453faf | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d10ee0f1f773738ebc824d2c723a90b5e29542ef | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/563252ffffaf725c104a341d99f30744e91d6d2e | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/671deffe99e040d0edc13e825952dfc42616ec2b | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b023510f9798eb0d881b18015e6ff3b5f2557faa | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0b5e5dc99bbbfc3f51cdfbe190dddc1815b96b2b | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/bec293cbe86cc1306410fe997e838767bcb41c9a | sparc64 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/00cdd54866b159f84f5d194fd8eb67b4364df003 | x86_64 | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/a1a6c0667f58b3113ecda380a4a08ba845afc99b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/3cf43c95b7a3db4295fd0397d18a4c4ab712bce4 | or1k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/1653a03d0c0ae355c1b6f7fc9ad36c552c656576 | i686 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/8fbfca82c891be9b20a19d90f501a86b8b45396d | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b73b2eb863788bda786620a3d9f004689b35604 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4fc45dbdde9bb7e09b64a19f1f33a5336f937a22 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5becd597c8f7f60afd885c7fbf86aa8e7fcd936f | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f37c54d45d51771452e22d985333bb2ef76a86a6 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/68e8b1d9a38aecaace9b8e17c33cd3c66ca7f62f | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/071bc880c1c80257ebfcb499f24168b6a7b1b68d | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/871d20ea5db393d9d7450e9f797f851e628d2c73 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/838abe3ad9122d33189900992ede400234d1904e | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/beb1403f5dd5d84eb9686232629fb2a6ca275bfe | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/28cda709008b394637cf1180c4ea3464d3312252 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5fdd487b1341e1cf9badfa856622985a21e42988 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/419b8d70fa370fc1c8128292aadb71bb800a8ac1 | or1k | libcamera-ba6435930f08e802c... | NOK | http://autobuild.buildroot.net/results/cd922dcced0d3a4076a42a0828fab2ca4c962f2c | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/6165ba057ee526446d91808451d5350a804390ad | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a6a2532e1c12d31a29a61e46064d8fc2fb524c92 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0271d41b953a43e27138a377f5da9c1cb19f99c5 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ff4dbe90965e060faff01863817b672e17a4fe81 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/63dd1fc2c99b172bc4b53b0036008802cb1f3c70 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4574ca78d4fe1f104e737489032ed023a541a243 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e5125e6bff5e9704dfac3b85fc1c05405db0ac19 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/66e93ade6d81c83ee2acffc96ce1232fd768eaeb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8ce241c5068fa23add9e48715cfd4fe38fd5b804 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ef5ccc5365de23ff33ccdf6ac392aebdaa4c42c9 | microblaze | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/4653dee2da4888a070557fa62b9b1a2cd88c0864 | ORPH mips | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/b2fdcf564427c118cb2b36d20fd4543c2f4796e0 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/e5b98df0f5de23117183c5842308e6dfd4b4ba9d | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/7dc9b9903b51cf4347078dac05dce3e59468958d | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/73e00c0872339d37fedd40012236f7080c85b81c | ORPH powerpc64le | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/aefc4fbd2676575d22b5f4209f89c4812eb3c45f | ORPH aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/db78751b5e6b863fde6eb7536db830a31510c18a | aarch64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/3cf19f5de18723c6726aa0b328196c1b4ef22bfb | powerpc | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/ae20eb328682ebe3826005254db280b266a4f678 | sh4a | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a2b733c7e23ec2000eeda802394566e03e4b74b0 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/f39e68ab56b17126caef7c0dabaca61488dfd1e6 | ORPH sh4a | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/ef7696512922e0aa1a9349772b01d1bb6b755817 | ORPH xtensa | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/a8da4f32b46e1ddf630cea9502760e0e8a3ecd68 | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/8ef3b61b94ed4fa150890c3db892abdbb9022a4a | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e7787cb0464317d7e99e505ac0622b7b36ede1de | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/03b62346e54a53dadd27c6e111ec837d3276aa25 | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/f1f2f877e7e6dfa1c54aef68ed85d19c722578fb | ORPH aarch64_be | linux-6.0 | NOK | http://autobuild.buildroot.net/results/8fa9a7ccbd248d289aa8036d681b369601e3d9e1 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/b4121c433e9dd87265730ed7006cfa3bf485ca78 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/126c90d9aa5cc8fdd007300ec14a285ae326296c | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/61caa406d79b1267ab820456fc8b1887c828a528 | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/eb9da90f90653474fe37ae616e88a634fddf8d36 | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bafaf328ab7b9263f4416d0a95e59463f87fd877 | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/eba3ec503148453df36bc710d28b1037d7d7ad67 | ORPH i686 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/1a2f834a16ef86737a06c3f2d1963430470cdec5 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/48a3daad4127c11d94c9055824b729f4d708c140 | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b20d5d1ec185dc319c4cf1fc49d4a456719e897d | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/829beb60761c6efe0aab3f10eb73dc2606e32cc6 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/382ea650da1892a3a20fb03fd088d993b99c8d04 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/f9da62dbdbd372d5bac9a4e56926dd44e68ca9a1 | ORPH powerpc64le | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/a52385af8ecacd58b6c22b1363f3a63f89dba2e1 | i686 | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/ca9b2d3742c57fcb15d44aaf692a5cf541f317b8 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1ca1c1c15284aaf3acdb7a7e7f0aa85133941703 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/16ecce59651108dd94d9a833d66aa69fc2dc38c6 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/29482c15cb84457a8aa484a20a0b775cd927f6f0 | xtensa | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/6c4a7f238983acb8560e016e421d2d4cd446be3e | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/1ea63fb2c0ede133788993cd05b3fd8d1b3fcfba | ORPH or1k | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/5571ec37446327a5b6afe92c344d7d34d0324476 | ORPH x86_64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/8f16ab8470f26ba432149f19ad197ab6be286edc | x86_64 | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/8ced3c5c51cdba810ff37be3a0f09921a65bc38b | x86_64 | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/6c451033c073d8808b8d5e0fc2eccb90e82e34c5 | x86_64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/bb1fa6bdf601c5e4f6b306111fb6ab14723d650f | mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ce6eb36649de8f7bff24c7ba0b570529eff1cd36 | ORPH mips | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/29306aa20d9ca22e7966f9ebb2b63835bf759d7a | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5cb2c974072a769e6df005f6435edb2f303c9c6d | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/817ea86be0c06c89db0343ed45b26794c6232da8 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/be07dd476768c084cfb27fb944d2de08aa11cdb7 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/8da701fd2d09032b78415f456493465ee40707c0 | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f6b6740644a76df5665cce475792f7eaa612e996 | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ca1975ce45e2bc9e6cfae0cf496a838142a453a2 | ORPH riscv64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/875c37817087095f256a3104d232ec75f5ac8b21 | ORPH microblaze | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/aa020ba74308ffde8c5834cbaa9cff5323fc5320 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/202cfd8d7ac8804e6ec48ec1f476b36ef307b6bf | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f95063402c99e45522cb1c9a09bd222e9ca26843 | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/d3ff2e23c31fd41db5ba8afabb5748fff7681022 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5cb99a0ec09a9f4627ea302877e903482fae3e5f | ORPH xtensa | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/43d42dfceed61a2b0e842edaa1d706cb9f028683 | ORPH i686 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/4ca9d0317e514fc9c19783aa83ce0226857fa8fd | ORPH mips64el | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/8b12d08cd861c7aed6cbd3f31db111c3bd7be7c4 | i686 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/716ec921f5f18666bbc32f98a5f4acb969719331 | ORPH or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/0db43bd4a87d17d3a667366b6e7d044ad24c08c7 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/4002e5a44e36cdd58c626b5b6357a51e2faf2e4b | riscv32 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/c480a7c05a406938f88071078a7aba18691fc235 | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/0384d9a5dc0e00542503d00b0d23178f56d108c4 | ORPH aarch64 | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/9d28efe7aac32c5d32d5192d583214ecf34b7427 | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/a54df4fe4b2e907f5b9561f98823e0e5930d84b9 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4f6764593c25e53f7e4c72849109d08acebf58b3 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/40725c9fe68ecb24699100a6127f3acf7c4e644f | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1fc839853e51b027b33ed4ff5fb0b4e86ea1e5c1 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/aa9cbd74b81607197eedd90e3d5c7dcbe2403d7a | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/48b7893c52301f1a8aef87954dd5e7ec23a24994 | sh4eb | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/523d0f63870085bc8e217cfe788a2d578bd4c7f5 | armeb | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/88a292911f5ec8b47a5f24a6aebc222fa2cfc685 | microblaze | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/0313a142494ff4a4d667738cac74e3aa39da9d0f | microblaze | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/a69a8f1399d2c57a5dd5b95ba23f5ff7bf191a6d | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/442cc0d85b29702886640c04d6aee788a0a1effe | ORPH mips | python-orjson-3.7.11 | NOK | http://autobuild.buildroot.net/results/ce7a99fb0df7cb24abb3a6279c4625ca7e65b322 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/286ca5cabfa21b97366e6111f5ecdb7b63188f9c | arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/b2f58d1302e78214f4b23b4169a039707b33a838 | x86_64 | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/a2471302bea28fe6992f3aba3bb699ef2dc3a3bc | aarch64 | qt-webkit-kiosk-a7720e50f2b... | NOK | http://autobuild.buildroot.net/results/121f373e37fc17965d990b2528f7830a0c2a025f | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/46ddb3ccbbb0260cd037354c47fd8d8c58538761 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/a9568b2fb4d7c505265c89f620e085031e01c005 | microblazeel | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/b78a882836abf03e9c2126bf81a23be72587a425 | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/5121a09736aa03552f55572ed9aef9b0912b3963 | powerpc | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/2120f1d0686ccb4f2b7a7d8f3963850b2c289ecb | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3da4424ee43a0d7d12276bcbef1dbff21ea184d8 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/130f3a59c51be1be23b9c4aef17bce7f4bdf34ec | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/528cf652e41a404c1f6f2c2be1ed2438559af894 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c6a6a68de7082c71f0edf409b1044352725d9dea | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3ce9a1ca79d909e936e06030e0c0e1366e0bdc6b | mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4f3cd17142407a4bc5551b06b554dd097a3eff2e | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/99cd421a27fec411ef2b711b3e8d5c7dd6676b94 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3a768ebaee21813b5053a1acc51f01b5d3a75299 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2ca8b593911eb2e00d9f09e65fdf7197cdc3e841 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f478436b5f21fae8ae34aa49130530f57dca8887 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7193c52f601f78ecbfaed07ef0790561d33784e1 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4a08b2d20b862fc30e447a29241ccbcd0d9b06f0 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f85e12194f3037187ff9693cdf5210ee25613136 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6f8f5372d210b60ead14957e63a7ef76ecaa0791 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f4d17e74f8673fe4814116bc3c03af81037775dd | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2a6d33853dcaf2917f27de787c273ce43de90e1 | ORPH i586 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f481d24bfb53eb9c8c711086da3c3ac088b0a11f | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2749b6b5434585c3d4dc331b40539de6d3d51db7 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3efc20d887a20fc22cd2cb6ee468befdfa0639a8 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7193020c9a5a0a90bc241b0c319129425beb9429 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/66da7486191350cdc13b4e468949a91dd99cf6b4 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0a9cdc352c67e1b39636b3e74359f07bcaafd9cf | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/e7087b49dd87e40472fed60beb9b2a0777b8a062 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/23dde1d453415f20531a436b49f2eba4df12cd26 | mips64el | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/bf7676888cbe759ed0eefb71d7a2d0c90a39e66b | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/60b239b7d997999b9fb1c9cc328c7d9381348f25 | ORPH armeb | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/2e630956b2438c9934e8982d1558959290b983fa | microblazeel | uhd-4.3.0.0 | NOK | http://autobuild.buildroot.net/results/c1ea9f387b5a450ac96e548be3545da6d58c0b00 | aarch64 | uhd-4.3.0.0 | NOK | http://autobuild.buildroot.net/results/c4d3b1296efe641fbbc78632d189583b0294131f | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/149d835dc3e4f1e9015567130ffb7bf4eeec6d49 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/8acdfa2abc02cbf10a0b439eabd734c38b50e52d | arceb | unknown | NOK | http://autobuild.buildroot.net/results/054cfda089e7819adeb3fe963ce68641d90b08a0 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/cbd4ca9376d21503e27869ee41b518c3424dc0da | m68k | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/2fe1b4ee2f99154f256d1d56b552016f7b700d3d | ORPH s390x | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/44f32435193a59ae4cd93ec90c26b8204af0bb51 | ORPH i686 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/399ca957c6309052cc8a06822601880ca1edd0a0 | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/dd9ef14b4da177bbbcc7cf0423f17fdf321e5f05 | ORPH sh4aeb | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/2a5521b2f957084266789d51803a9559c6382de9 | i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/42b7a13ec931fcd5dd9c35146a5ce2f2873a35e8 | powerpc64le | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/95c482f450d713a73d9ca434203dc71d8e7a5d3b | mips | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/79667bbe11c4018e09823f96f263c9bdecf7ee70 | mipsel | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/f9301581fb2bd475ee7facc5b357cbf4df6008e3 | ORPH arm | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/0b344cce93d5f708b1782409d08e8771828aab91 | ORPH x86_64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/53104caff2622f66911dae8734e6aad0b8cdb100 | i686 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/96bb9fbf75aaf2b72131c581b5389c39dd55f329 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/a9e1fde0a29741ea84059ef8deea4d671ba1ae6d | arm | zip-3.0 | NOK | http://autobuild.buildroot.net/results/766713ddd4e6e27e245d19d3398a84216f276f50 | microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/28a68af78889b14f7d6463886898099acef8dda0 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/32025bbdef9f2e0124f0a73b9ab52f7879a8dd4b | Classification of failures by reason for 2022.02.x -------------------------------------------------- host-delve-1.8.0 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/1a9d2535d0bb0c932f9605aff14012b5c8962527 | s390x | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/ec3f64fafa8808ab2298b0a3b0f69f2a5cfdcdab | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 host-rust-1.60.0 | 2 protobuf-3.20.1 | 2 dahdi-linux-5c840cf43838e06... | 1 docker-cli-20.10.18 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 mongodb-4.2.18 | 1 tbb-2021.5.0 | 1 xenomai | 1 zlib-ng-2.0.6 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/109796d8d99b1a862505dc3ee1362702e26b1d59 | i686 | docker-cli-20.10.18 | NOK | http://autobuild.buildroot.net/results/cb812916f70eecf307227bc7901f54d6fa521027 | aarch64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/2ce2bd4c0bcdaee6a85264ed204e9a99d2f2a4bc | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/59e71f37e74f06184ec31f9de54f757e1ce929a3 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9c84de01c1335153155c279fcb5d57edaf873674 | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/15618ca8c9b54941fc59617b69900cf47972997d | powerpc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/d856c74814c5e406c236bfb2658c400eb777df92 | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7d4f97e4628683f531e1598c6a57a53d1b8ff76d | x86_64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/9448e763f03046722eb00be296983b9343be8b91 | m68k | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/652d137b67b3e42fc609bdc88e1d4c6c57c241ab | arc | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/73bf83f30d9e4a4e6fa982ed072b42b7895937b8 | arm | tbb-2021.5.0 | NOK | http://autobuild.buildroot.net/results/82476601631d24764d4ac677c5f6096d8436a491 | microblazeel | xenomai | NOK | http://autobuild.buildroot.net/results/da2291dc662fd07f66930ff6a33ee6c03c41951b | aarch64 | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/9c68008d4003d2aaf206377e11d564e449ea26ce | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- exempi-2.6.1 | 2 gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 2 boost-1.79.0 | 1 docker-proxy-f6ccccb1c082a4... | 1 erlang-22.3.4.22 | 1 frr-8.2.2 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libdeflate-1.12 | 1 linux-5.17.15 | 1 nodejs-16.16.0 | 1 uclibc-1.0.42 | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 volk-2.5.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | boost-1.79.0 | NOK | http://autobuild.buildroot.net/results/5cd8c27853676dba1e4eb109cc2b5a03f03b7319 | x86_64 | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/68b79aa6a38289e048ae5677899c70e511ca6701 | x86_64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/6e650449c5603b1293be398c4342f464fc6121d6 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/963468cf6b2b6af086320787961caff9d42249be | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/fbd43e710a578cc886f71aaf111a2bcc241d317b | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/359295b21db137ea30f92dbd2b199f6e8f94e13e | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b48bbf3b2a73973c578db823e860dc8aa1329452 | i686 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c9d2961ff246be10b69ab8f4d5e1d168977c4504 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/0bc40328f4c41f3893d5e8c854e3970f669c356a | microblaze | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/69a6eb1efe0c8a0e3fe95901ff9f27f1c7c69e13 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/01a254a0f08002a48435f0ff71521220df1dda50 | i586 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/0f9bb6ca7b617e541ef2c0924d56230c76ac0047 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fe32b8535e47c25fa5d9e5d2f67e006ee2f28b49 | ORPH aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9f08153991882e2608df17ac5ecc58ae11ada52b | aarch64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/572ee10454eda32f979256cb11fc3856fd204ec4 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/06d63a53d80c7deb7007b7ea3faa0f42c0d47f47 | sh4 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/efb88e0886a6eda3ca93c9832ff0faf745fb3101 | ORPH aarch64 | nodejs-16.16.0 | NOK | http://autobuild.buildroot.net/results/00d97961a158bcd213e45ddb5f0206ba6e01d8ae | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ad615c522d463ea8da3e3c2da386cd468899de2c | mips | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/cc86dfa5f04872c82e95f850b80cc32cc5eab69a | ORPH nios2 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/636f084d3016e01f51eaea8800351997ab602ba8 | powerpc | volk-2.5.1 | NOK | http://autobuild.buildroot.net/results/bd72a5e888fbc30c172b1a06137ec43920d78ea4 | -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Sun Oct 9 08:41:23 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Sun, 9 Oct 2022 10:41:23 +0200 Subject: [Buildroot] [PATCH] package/libostree: bump to version 2022.6 Message-ID: <20221009084123.231395-1-marcus.folkesson@gmail.com> Signed-off-by: Marcus Folkesson --- package/libostree/libostree.hash | 2 +- package/libostree/libostree.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libostree/libostree.hash b/package/libostree/libostree.hash index 6839d5439c..582af4b7b9 100644 --- a/package/libostree/libostree.hash +++ b/package/libostree/libostree.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 914c4d993bc111d7dd30ae9721b6ffe8ab56eb1fd6e81b097b09f400cc1b053f libostree-2022.5.tar.xz +sha256 835ef47d9a0b35a10c77ffd7f0fbd2e2b87f7cccb588da27442a05ff71ffad8c libostree-2022.6.tar.xz sha256 b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c COPYING diff --git a/package/libostree/libostree.mk b/package/libostree/libostree.mk index e0c955bc9a..e99da9d2cb 100644 --- a/package/libostree/libostree.mk +++ b/package/libostree/libostree.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSTREE_VERSION = 2022.5 +LIBOSTREE_VERSION = 2022.6 LIBOSTREE_SOURCE = libostree-$(LIBOSTREE_VERSION).tar.xz LIBOSTREE_SITE = https://github.com/ostreedev/ostree/releases/download/v$(LIBOSTREE_VERSION) -- 2.37.1 From guillaume.bressaix at gmail.com Sun Oct 9 09:29:12 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 9 Oct 2022 11:29:12 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <20221006221340.45c07636@x230_1.trabucayre.com> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> <20221006221340.45c07636@x230_1.trabucayre.com> Message-ID: Hello guys, sorry for the delayed answer, no access to personal emails for a bit > I am sorry, but this still doesn't make any sense, and will in fact > cause build failures. A package cannot have a target package in its > _DEPENDENCIES variable without selecting it. I agree with Thomas. Basically "gnuradio" is now becoming similar to "scipy" which already exists. And we do select "python-pybind" when enabling "scipy". > If python-pybind is needed at build time on the host, then > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > needs to be done in Config.in. I disagree with Thomas on this and agree with the proposal. But that's only due to the weird nature of pybind. The current setup/description of pybind is a Header only package, it is not a host-package but the only difference *to me*, is where the headers are installed to. I scrolled the pybind emails history. The only justification for this, *to me*, is Yann's: "As I explained in my previous review, headers are supposed to be in $(STAGING_DIR)/usr/include/pybind11/. That's at least where they are in Debian-based distributions;" So pybind got reworked to match those expectations regarding how to properly manage a header only library. For us, this did not help because the pybind setup script is tedious. But we got it to work. On the other hand, there are plenty of header only packages existing in BR so we had examples to rely on. For information, "gnuradio" and "scipy" are now the only two packages relying on "pybind". But two other candidates would be "kmsxx" and "zeek"; my understanding is, these two currently have a build context that embeds a pybind itself. Maybe in a not so far future, they would get incremented to rely on the pybind we provide Guillaume W. Bres Software engineer Le jeu. 6 oct. 2022 ? 22:13, Gwenhael Goavec-Merou a ?crit : > Hello, > On Thu, 6 Oct 2022 21:50:57 +0200 > Thomas Petazzoni wrote: > > > Hello, > > > > On Thu, 6 Oct 2022 10:27:57 +0200 > > Gwenhael Goavec-Merou wrote: > > > > > - Since gnuradio 3.10 swig was replaced by pybind. Now python > libraries, > > > bindings and python wrappers are produces using pybind: this why > > > python-pybind is a buildtime dependency. This one is a stagging only > > > package (nothing installed into target directory -> no select > > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES > is > > > updated with python-pybind). > > > > I am sorry, but this still doesn't make any sense, and will in fact > > cause build failures. A package cannot have a target package in its > > _DEPENDENCIES variable without selecting it. > > > > If python-pybind is needed at build time on the host, then > > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > > needs to be done in Config.in. > > > > If python-pybind is needed on the target, then two options: > > > > (1) It's needed only at runtime => it should be selected in Config.in. > > > > (2) It's needed at build-time => it should be selected in Config.in > > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd > > like to see a serious justification, because it is really uncommon to > > have target Python packages be build-time dependencies. > > > I'm totally agree: gnuradio needs host-python-pybind. > In fact pybind package is not really clear to me: > - there is no host-python-pybind > - python-pybind is used to populate staging (PYTHON_PYBIND_INSTALL_STAGING > = > YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET > = NO) > > If I remember well (but unable to find thread) one of previous bump has > required a long discussion with as result this status: maybe guillaume (in > CC) > could help to clarify situation. > > Best regards, > > > > Thomas > > -- > > Thomas Petazzoni, co-owner and CEO, Bootlin > > Embedded Linux and Kernel engineering and training > > https://bootlin.com > Regards, > > Gwenhael > -------------- next part -------------- An HTML attachment was scrubbed... URL: From guillaume.bressaix at gmail.com Sun Oct 9 09:37:16 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 9 Oct 2022 11:37:16 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> <20221006221340.45c07636@x230_1.trabucayre.com> Message-ID: it makes sense when you think about the header only case. When a package like gnuradio or scipy (which is being cross-compiled) is trying to locate the headers it needs, the search pool is the sysroot naturally. Which only contains cross-compiled binaries. So basically, a header only package does not produce binaries but readable things. We "cross-compile" them (mostly producing nothing), but the install step points to the correction destination: the sysroot search pool. Guillaume W. Bres Software engineer Le dim. 9 oct. 2022 ? 11:29, Guillaume Bres a ?crit : > Hello guys, > > sorry for the delayed answer, no access to personal emails for a bit > > > I am sorry, but this still doesn't make any sense, and will in fact > > cause build failures. A package cannot have a target package in its > > _DEPENDENCIES variable without selecting it. > I agree with Thomas. Basically "gnuradio" is now becoming similar to > "scipy" which already exists. > And we do select "python-pybind" when enabling "scipy". > > > If python-pybind is needed at build time on the host, then > > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > > needs to be done in Config.in. > I disagree with Thomas on this and agree with the proposal. But that's > only due to the weird nature of pybind. > The current setup/description of pybind is a Header only package, it is > not a host-package but the only difference *to me*, is where the headers > are installed to. > I scrolled the pybind emails history. The only justification for this, *to > me*, is Yann's: > "As I explained in my previous review, headers are supposed to be in > $(STAGING_DIR)/usr/include/pybind11/. That's at least where they are in > Debian-based distributions;" > > So pybind got reworked to match those expectations regarding how to > properly manage a header only library. > For us, this did not help because the pybind setup script is tedious. But > we got it to work. > On the other hand, there are plenty of header only packages existing in BR > so we had examples to rely on. > > For information, "gnuradio" and "scipy" are now the only two packages > relying on "pybind". > But two other candidates would be "kmsxx" and "zeek"; my understanding is, > these two currently have a build context that embeds a pybind itself. > Maybe in a not so far future, they would get incremented to rely on the > pybind we provide > > > Guillaume W. Bres > Software engineer > > > > Le jeu. 6 oct. 2022 ? 22:13, Gwenhael Goavec-Merou > a ?crit : > >> Hello, >> On Thu, 6 Oct 2022 21:50:57 +0200 >> Thomas Petazzoni wrote: >> >> > Hello, >> > >> > On Thu, 6 Oct 2022 10:27:57 +0200 >> > Gwenhael Goavec-Merou wrote: >> > >> > > - Since gnuradio 3.10 swig was replaced by pybind. Now python >> libraries, >> > > bindings and python wrappers are produces using pybind: this why >> > > python-pybind is a buildtime dependency. This one is a stagging only >> > > package (nothing installed into target directory -> no select >> > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but >> GNURADIO_DEPENDENCIES is >> > > updated with python-pybind). >> > >> > I am sorry, but this still doesn't make any sense, and will in fact >> > cause build failures. A package cannot have a target package in its >> > _DEPENDENCIES variable without selecting it. >> > >> > If python-pybind is needed at build time on the host, then >> > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing >> > needs to be done in Config.in. >> > >> > If python-pybind is needed on the target, then two options: >> > >> > (1) It's needed only at runtime => it should be selected in Config.in. >> > >> > (2) It's needed at build-time => it should be selected in Config.in >> > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd >> > like to see a serious justification, because it is really uncommon to >> > have target Python packages be build-time dependencies. >> > >> I'm totally agree: gnuradio needs host-python-pybind. >> In fact pybind package is not really clear to me: >> - there is no host-python-pybind >> - python-pybind is used to populate staging >> (PYTHON_PYBIND_INSTALL_STAGING = >> YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET >> = NO) >> >> If I remember well (but unable to find thread) one of previous bump has >> required a long discussion with as result this status: maybe guillaume >> (in CC) >> could help to clarify situation. >> > Best regards, >> > >> > Thomas >> > -- >> > Thomas Petazzoni, co-owner and CEO, Bootlin >> > Embedded Linux and Kernel engineering and training >> > https://bootlin.com >> Regards, >> >> Gwenhael >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tianyuanhao3 at 163.com Sun Oct 9 11:14:23 2022 From: tianyuanhao3 at 163.com (TIAN Yuanhao) Date: Sun, 9 Oct 2022 04:14:23 -0700 Subject: [Buildroot] [PATCH v2 1/1] package/open-iscsi: new package In-Reply-To: <20220926154320.35494-1-tianyuanhao3@163.com> References: <20220926154320.35494-1-tianyuanhao3@163.com> Message-ID: <20221009111423.7654-1-tianyuanhao3@163.com> Signed-off-by: TIAN Yuanhao Cc: Thomas Petazzoni --- Changes in v2: - Remove installation logic (suggested by Thomas) While I think a lot of unnecessary stuff is installed, we still have a working iSCSI agent. --- DEVELOPERS | 1 + package/Config.in | 1 + package/open-iscsi/Config.in | 19 +++++++++++++++++++ package/open-iscsi/open-iscsi.hash | 3 +++ package/open-iscsi/open-iscsi.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 51 insertions(+) create mode 100644 package/open-iscsi/Config.in create mode 100644 package/open-iscsi/open-iscsi.hash create mode 100644 package/open-iscsi/open-iscsi.mk diff --git a/DEVELOPERS b/DEVELOPERS index 54216450f4..7a698c31c0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2791,6 +2791,7 @@ N: Sven Oliver Moll F: package/most/ N: TIAN Yuanhao +F: package/open-iscsi/ F: package/open-isns/ N: Theo Debrouwere diff --git a/package/Config.in b/package/Config.in index de51be400b..dacc317132 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2357,6 +2357,7 @@ endif source "package/odhcp6c/Config.in" source "package/odhcploc/Config.in" source "package/olsr/Config.in" + source "package/open-iscsi/Config.in" source "package/open-lldp/Config.in" source "package/open-plc-utils/Config.in" source "package/openntpd/Config.in" diff --git a/package/open-iscsi/Config.in b/package/open-iscsi/Config.in new file mode 100644 index 0000000000..04ec120e9a --- /dev/null +++ b/package/open-iscsi/Config.in @@ -0,0 +1,19 @@ +config BR2_PACKAGE_OPEN_ISCSI + bool "open-iscsi" + depends on BR2_USE_MMU # fork() + depends on BR2_TOOLCHAIN_HAS_THREADS # pthread + depends on !BR2_STATIC_LIBS # kmod + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_OPEN_ISNS + select BR2_PACKAGE_KMOD + select BR2_PACKAGE_UTIL_LINUX + select BR2_PACKAGE_UTIL_LINUX_LIBS + select BR2_PACKAGE_UTIL_LINUX_LIBMOUNT + help + iSCSI tools for Linux. + + https://www.open-iscsi.com + +comment "open-iscsi needs a toolchain w/ threads, dynamic library" + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/open-iscsi/open-iscsi.hash b/package/open-iscsi/open-iscsi.hash new file mode 100644 index 0000000000..9fd651cae8 --- /dev/null +++ b/package/open-iscsi/open-iscsi.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 9565bdf6b68b223e1e0d455d9a04d7536724a3f5b5a254e9398d06b2a0c6b6d2 open-iscsi-2.1.8.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/open-iscsi/open-iscsi.mk b/package/open-iscsi/open-iscsi.mk new file mode 100644 index 0000000000..4bbd96f591 --- /dev/null +++ b/package/open-iscsi/open-iscsi.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# open-iscsi +# +################################################################################ + +OPEN_ISCSI_VERSION = 2.1.8 +OPEN_ISCSI_SITE = $(call github,open-iscsi,open-iscsi,$(OPEN_ISCSI_VERSION)) +OPEN_ISCSI_LICENSE = GPL-2.0+ +OPEN_ISCSI_LICENSE_FILES = COPYING +OPEN_ISCSI_DEPENDENCIES = kmod open-isns openssl util-linux-libs + +OPEN_ISCSI_CONF_OPTS = -Ddbroot=/var/lib/iscsi + +ifeq ($(BR2_PACKAGE_SYSTEMD),y) +OPEN_ISCSI_DEPENDENCIES += systemd +OPEN_ISCSI_CONF_OPTS += -Dno_systemd=false +else +OPEN_ISCSI_CONF_OPTS += -Dno_systemd=true +endif + +define OPEN_ISCSI_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_SCSI_LOWLEVEL) + $(call KCONFIG_ENABLE_OPT,CONFIG_ISCSI_TCP) +endef + +$(eval $(meson-package)) -- 2.25.1 From romain.naour at gmail.com Sun Oct 9 15:35:21 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sun, 9 Oct 2022 17:35:21 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os Message-ID: <20221009153521.12444-1-romain.naour@gmail.com> Backport upstream commit for x86_64 builds with -Os reported by [1]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 Signed-off-by: Romain Naour --- .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch new file mode 100644 index 0000000000..4470324f1c --- /dev/null +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch @@ -0,0 +1,48 @@ +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 +From: Adhemerval Zanella Netto +Date: Wed, 21 Sep 2022 10:51:08 -0300 +Subject: [PATCH] x86: Fix -Os build (BZ #29576) + +The compiler might transform __stpcpy calls (which are routed to +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy +multiarch implementation does not build any working symbol due +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). + +Checked on x86_64-linux-gnu. +Reviewed-by: Carlos O'Donell +Tested-by: Carlos O'Donell + +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) +Signed-off-by: Romain Naour +--- + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S + +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S +new file mode 100644 +index 0000000000..19439c553d +--- /dev/null ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S +@@ -0,0 +1,18 @@ ++/* Copyright (C) 2022 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ . */ ++ ++#include "../strcpy.S" +-- +2.34.3 + -- 2.34.3 From troglobit at gmail.com Sun Oct 9 15:59:28 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:28 +0200 Subject: [Buildroot] [PATCH 0/9] bump skarnet software: s6, execline, mdevd, etc. Message-ID: <20221009155938.2041695-1-troglobit@gmail.com> This patch series bumps the version of several of Laurent Bercot's packages. The idea was to upgrade mdevd, which depends on skalibs, but it in turn is a dependency for the other packages upgraded here. Please note, I've only tested mdevd, the orther packages have only been test built using test-pkg. The following skarnet.config was used: BR2_PACKAGE_SKALIBS=y BR2_PACKAGE_EXECLINE=y BR2_PACKAGE_S6_DNS=y BR2_PACKAGE_S6_LINUX_UTILS=y BR2_PACKAGE_S6_PORTABLE_UTILS=y BR2_PACKAGE_S6=y BR2_PACKAGE_S6_RC=y BR2_PACKAGE_S6_NETWORKING=y BR2_PACKAGE_MDEVD=y $ ./utils/test-pkg -c skarnet.config -p mdevd bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: SKIPPED bootlin-x86-64-musl [4/6]: OK br-arm-full-static [5/6]: OK sourcery-arm [6/6]: OK 6 builds, 1 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed Best regards /Joachim Joachim Wiberg (9): package/skalibs: bump to v2.12.0.1 package/mdevd: bump to v0.1.6.0 package/execline: bump to v2.9.0.1 package/s6: bump to v2.11.1.2 package/s6-linux-utils: bump to v2.6.0.0 package/s6-portable-utils: bump to v2.2.5.0 package/s6-dns: bump to v2.3.5.4 package/s6-networking: bump to v2.5.1.1 package/s6-rc: bump to v0.5.3.2 package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 18 files changed, 27 insertions(+), 27 deletions(-) -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:29 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:29 +0200 Subject: [Buildroot] [PATCH 1/9] package/skalibs: bump to v2.12.0.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-2-troglobit@gmail.com> Summary of changes: New: - New djbunix functions: waitn_posix(), waitn_reap_posix() - New unix-transactional.h function: opendir_at. - New skalibs/posixplz.h function: munmap_void(). - random functions now have an early version, to use when randomness is required before the generator can be seeded (i.e. in programs running in the very early boot). - envdir_internal() now has a SKALIBS_ENVDIR_NOCLAMP option allowing reading of unlimited-size variables. - fd_close() now chooses to adapt to Linux's close() behaviour (closing the fd on EINTR) over the HP-UX one (not closing it). Destructors like close() being allowed to fail has always been a mistake in the specification and a programming nightmare, making it impossible to behave correctly on all systems, but apparently standardization efforts are on the way and the Linux behaviour seems to be the chosen one. Removed: - libbiguint removed. - Obsolete skalibs/environ.h and skalibs/getpeereid.h headers removed. - rc4 and md5 functions removed. - iobuffer removed. fd_cat() and fd_catn() changed signatures. - All signal functions entirely reworked; cruft removed. - The unsafe cdb_successor() API has been removed. - random_init() and random_finish() removed, as well as random_char(). Renamed APIs and type: - random_string() renamed to random_buf(). - All *_t types renamed without the _t suffix, to preserve POSIX namespace. - subgetopt() renamed to lgetopt(). - skalibs/cdb_make.h renamed to skalibs/cdbmake.h; cdbmake functions now return 1 on success and 0 on failure. - skalibs/cdb.h redesigned to remove reader state from the cdb structure. Signed-off-by: Joachim Wiberg --- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/skalibs/skalibs.hash b/package/skalibs/skalibs.hash index 48e4028edc..dd202b97fb 100644 --- a/package/skalibs/skalibs.hash +++ b/package/skalibs/skalibs.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 b780b0ae650dda0c3ec5f8975174998af2d24c2a2e2be669b1bab46e73b1464d skalibs-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 3e228f72f18d88c17f6c4e0a66881d6d3779427b7e7e889f3142b6f26da30285 skalibs-2.12.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/skalibs/skalibs.mk b/package/skalibs/skalibs.mk index 77db57de96..0ff449a5ba 100644 --- a/package/skalibs/skalibs.mk +++ b/package/skalibs/skalibs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SKALIBS_VERSION = 2.10.0.3 +SKALIBS_VERSION = 2.12.0.1 SKALIBS_SITE = http://skarnet.org/software/skalibs SKALIBS_LICENSE = ISC SKALIBS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:30 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:30 +0200 Subject: [Buildroot] [PATCH 2/9] package/mdevd: bump to v0.1.6.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-3-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.1. - execline optional dependency bumped to 2.9.0.1. - New -O nlgroups option to mdevd, rebroadcasting uevents to the netlink after handling them. - The * and & action directives are now triggered by all action types. Signed-off-by: Joachim Wiberg --- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mdevd/mdevd.hash b/package/mdevd/mdevd.hash index 93950304be..dea2f14978 100644 --- a/package/mdevd/mdevd.hash +++ b/package/mdevd/mdevd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 ffd3b223b4cf0e51253b4a8f09cb88d70bf22693228ab0818af174a3f099dcd2 mdevd-0.1.4.0.tar.gz -sha256 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995 COPYING +sha256 33cf2b118634538fd24f302b30f52cc8aa28ea68b414916ce482b54a4ee57283 mdevd-0.1.6.0.tar.gz +sha256 7fe938b5e0fec18848955ca8081c532e24ae77310beb730b301e1f77bad3d390 COPYING diff --git a/package/mdevd/mdevd.mk b/package/mdevd/mdevd.mk index a0cd71e76e..9997cb5275 100644 --- a/package/mdevd/mdevd.mk +++ b/package/mdevd/mdevd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MDEVD_VERSION = 0.1.4.0 +MDEVD_VERSION = 0.1.6.0 MDEVD_SITE = http://skarnet.org/software/mdevd MDEVD_LICENSE = ISC MDEVD_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:32 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:32 +0200 Subject: [Buildroot] [PATCH 4/9] package/s6: bump to v2.11.1.2 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-5-troglobit@gmail.com> Summary of changes: - execline optional dependency bumped to 2.9.0.1. - skalibs dependency bumped to 2.12.0.0. - nsss optional dependency bumped to 0.2.0.1. - s6-svwait now supports the -r and -R options, to wait for service restarts. - The s6/lock.h, s6/supervise.h and s6/fdholder.h headers replace their previous versions that had an extra s6 prefix. - New binaries: s6-svlink, s6-svunlink, and s6-socklog. Signed-off-by: Joachim Wiberg --- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6/s6.hash b/package/s6/s6.hash index a829700d97..3c5ce4265a 100644 --- a/package/s6/s6.hash +++ b/package/s6/s6.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d21373151704150df0e8ed199f097f6ee5d2befb9a68aca4f20f3862e5d8757 s6-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c1474be3e889dac392cee307abe015cd4be0c85c725c84ea7f184f0e34503a2 s6-2.11.1.2.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6/s6.mk b/package/s6/s6.mk index ead82d7eaf..78962ed159 100644 --- a/package/s6/s6.mk +++ b/package/s6/s6.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_VERSION = 2.10.0.3 +S6_VERSION = 2.11.1.2 S6_SITE = http://skarnet.org/software/s6 S6_LICENSE = ISC S6_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:31 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:31 +0200 Subject: [Buildroot] [PATCH 3/9] package/execline: bump to v2.9.0.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-4-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - New options to wait: -o to wait for one of the listed processes, and -a to get the default behaviour. - wait now exits 99 on timeout. Signed-off-by: Joachim Wiberg --- package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/execline/execline.hash b/package/execline/execline.hash index 706b131afd..1d72e2cb49 100644 --- a/package/execline/execline.hash +++ b/package/execline/execline.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a373f497d2335905d750e2f3be2ba47a028c11c4a7d5595dca9965c161e53aed execline-2.8.0.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 01260fcaf80ffbca2a94aa55ea474dfb9e39b3033b55c8af88126791879531f6 execline-2.9.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/execline/execline.mk b/package/execline/execline.mk index c348d924b7..38f4570ba4 100644 --- a/package/execline/execline.mk +++ b/package/execline/execline.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXECLINE_VERSION = 2.8.0.1 +EXECLINE_VERSION = 2.9.0.1 EXECLINE_SITE = http://skarnet.org/software/execline EXECLINE_LICENSE = ISC EXECLINE_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:33 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:33 +0200 Subject: [Buildroot] [PATCH 5/9] package/s6-linux-utils: bump to v2.6.0.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-6-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - s6-fillurandompool has been replaced with the new rngseed program. Signed-off-by: Joachim Wiberg --- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-linux-utils/s6-linux-utils.hash b/package/s6-linux-utils/s6-linux-utils.hash index 27e7eb7b7a..c932a4363a 100644 --- a/package/s6-linux-utils/s6-linux-utils.hash +++ b/package/s6-linux-utils/s6-linux-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 c300dbf36b533083f82c6827830c55ce34bfc6cd493c782f207d199669a345ba s6-linux-utils-2.5.1.5.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c7132734a0c8287002ee6910c469f175a97d766a8023c0c33af8ba92643ed59 s6-linux-utils-2.6.0.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-linux-utils/s6-linux-utils.mk b/package/s6-linux-utils/s6-linux-utils.mk index 995ff1b855..ffa3ffac5b 100644 --- a/package/s6-linux-utils/s6-linux-utils.mk +++ b/package/s6-linux-utils/s6-linux-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_LINUX_UTILS_VERSION = 2.5.1.5 +S6_LINUX_UTILS_VERSION = 2.6.0.0 S6_LINUX_UTILS_SITE = http://skarnet.org/software/s6-linux-utils S6_LINUX_UTILS_LICENSE = ISC S6_LINUX_UTILS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:34 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:34 +0200 Subject: [Buildroot] [PATCH 6/9] package/s6-portable-utils: bump to v2.2.5.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-7-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-portable-utils/s6-portable-utils.hash b/package/s6-portable-utils/s6-portable-utils.hash index dd9f7df4bd..aa38c8b5da 100644 --- a/package/s6-portable-utils/s6-portable-utils.hash +++ b/package/s6-portable-utils/s6-portable-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 6627a2d3ea263539e83512a36f10a587fa0dd5e899bc3612187e9e3b9faf769c s6-portable-utils-2.2.3.2.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 ebb39f8934fd36f25d31352e61bbd94dc02b1e9f04411850d2fd9658bd916e36 s6-portable-utils-2.2.5.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-portable-utils/s6-portable-utils.mk b/package/s6-portable-utils/s6-portable-utils.mk index fb910320ea..8cdb4fa965 100644 --- a/package/s6-portable-utils/s6-portable-utils.mk +++ b/package/s6-portable-utils/s6-portable-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_PORTABLE_UTILS_VERSION = 2.2.3.2 +S6_PORTABLE_UTILS_VERSION = 2.2.5.0 S6_PORTABLE_UTILS_SITE = http://skarnet.org/software/s6-portable-utils S6_PORTABLE_UTILS_LICENSE = ISC S6_PORTABLE_UTILS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:35 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:35 +0200 Subject: [Buildroot] [PATCH 7/9] package/s6-dns: bump to v2.3.5.4 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-8-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-dns/s6-dns.hash b/package/s6-dns/s6-dns.hash index c63e96e129..5083024520 100644 --- a/package/s6-dns/s6-dns.hash +++ b/package/s6-dns/s6-dns.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 0c1d50e5d7bc65cbf59b6f37fbd7f6f5645694224bb8c4dc1943d7921bc74f63 s6-dns-2.3.5.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 76af222472c4754f83cdc59ad354255ce1b1e6f6833a059328463f8e51f4db43 s6-dns-2.3.5.4.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-dns/s6-dns.mk b/package/s6-dns/s6-dns.mk index dfde2c29f1..1b7d65570f 100644 --- a/package/s6-dns/s6-dns.mk +++ b/package/s6-dns/s6-dns.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_DNS_VERSION = 2.3.5.1 +S6_DNS_VERSION = 2.3.5.4 S6_DNS_SITE = http://skarnet.org/software/s6-dns S6_DNS_LICENSE = ISC S6_DNS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:36 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:36 +0200 Subject: [Buildroot] [PATCH 8/9] package/s6-networking: bump to v2.5.1.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-9-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0 - s6-dns dependency bumped to 2.3.5.4 - skalibs dependency bumped to 2.11.1.0 - execline optional dependency bumped to 2.8.2.0 - s6 dependency bumped to 2.11.0.1 - The obsolete minidentd program has been removed. - LibreSSL optional dependency bumped to 3.3.4 - LibreTLS optional dependency bumped to 3.3.4 - Client certificates are now properly supported in s6-tlsd-io. Signed-off-by: Joachim Wiberg --- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-networking/s6-networking.hash b/package/s6-networking/s6-networking.hash index 9e333866d3..1890f95221 100644 --- a/package/s6-networking/s6-networking.hash +++ b/package/s6-networking/s6-networking.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a3fbca789dc5c82b3055fdbd2f55110902198f3136447617ce8f8b79fa8aa554 s6-networking-2.4.1.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 7ac79d4de3d9c13532e444ab7497c4e04ad0fa7229d502984d9dc7d48aa64418 s6-networking-2.5.1.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-networking/s6-networking.mk b/package/s6-networking/s6-networking.mk index 03807f0652..f740f22635 100644 --- a/package/s6-networking/s6-networking.mk +++ b/package/s6-networking/s6-networking.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_NETWORKING_VERSION = 2.4.1.1 +S6_NETWORKING_VERSION = 2.5.1.1 S6_NETWORKING_SITE = http://skarnet.org/software/s6-networking S6_NETWORKING_LICENSE = ISC S6_NETWORKING_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:37 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:37 +0200 Subject: [Buildroot] [PATCH 9/9] package/s6-rc: bump to v0.5.3.2 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-10-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - execline dependency bumped to 2.9.0.0. - s6 dependency bumped to 2.11.1.0. - s6-rc-compile now reads service dependency information from the dependencies.d directory and bundle information from the contents.d directory, instead of the dependencies and contents flat files. The old format is still supported, but deprecated. Signed-off-by: Joachim Wiberg --- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-rc/s6-rc.hash b/package/s6-rc/s6-rc.hash index 8978d68ba6..0a84345e36 100644 --- a/package/s6-rc/s6-rc.hash +++ b/package/s6-rc/s6-rc.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 2a8d1cd455c05c8502b34517cfe79841aa46d08ad969076b37a15d3910617f89 s6-rc-0.5.2.2.tar.gz -sha256 4a5e44a69d649f0c37b29d7f6e5df1bb292b09898247be07f0c97814dac4b15d COPYING +sha256 4f24a4966a4aa353d2bd1a8afca9b88c7b7bd29c46b3a1a7f5305686b9d6e038 s6-rc-0.5.3.2.tar.gz +sha256 1898df1e8703bd9c1350d2ec3397880b9b4c1451038a9ce5e1c4b2e58622da39 COPYING diff --git a/package/s6-rc/s6-rc.mk b/package/s6-rc/s6-rc.mk index 05d7989735..85b047883b 100644 --- a/package/s6-rc/s6-rc.mk +++ b/package/s6-rc/s6-rc.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_RC_VERSION = 0.5.2.2 +S6_RC_VERSION = 0.5.3.2 S6_RC_SITE = http://skarnet.org/software/s6-rc S6_RC_LICENSE = ISC S6_RC_LICENSE_FILES = COPYING -- 2.34.1 From peter at korsgaard.com Sun Oct 9 18:06:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR In-Reply-To: <20221008170508.62837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:05:08 +0200") References: <20221008170508.62837-1-fontaine.fabrice@gmail.com> Message-ID: <87ilksrhw8.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR In-Reply-To: <20221008173619.76606-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:36:19 +0200") References: <20221008173619.76606-1-fontaine.fabrice@gmail.com> Message-ID: <87edvgrhw3.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR In-Reply-To: <20221008220716.150449-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:07:16 +0200") References: <20221008220716.150449-1-fontaine.fabrice@gmail.com> Message-ID: <87a664rhvx.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables In-Reply-To: <20221008221908.156459-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:19:08 +0200") References: <20221008221908.156459-1-fontaine.fabrice@gmail.com> Message-ID: <875ygsrhvl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE > identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:07:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:07:21 +0200 Subject: [Buildroot] [PATCH] package/libostree: bump to version 2022.6 In-Reply-To: <20221009084123.231395-1-marcus.folkesson@gmail.com> (Marcus Folkesson's message of "Sun, 9 Oct 2022 10:41:23 +0200") References: <20221009084123.231395-1-marcus.folkesson@gmail.com> Message-ID: <871qrgrhuu.fsf@dell.be.48ers.dk> >>>>> "Marcus" == Marcus Folkesson writes: > Signed-off-by: Marcus Folkesson Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:07:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:07:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/rt-tests: bump version to 2.4 In-Reply-To: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> (=?utf-8?Q?=22S=C3=A9bastien?= Szymanski"'s message of "Fri, 7 Oct 2022 11:23:00 +0200") References: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> Message-ID: <87wn98q39c.fsf@dell.be.48ers.dk> >>>>> "S?bastien" == S?bastien Szymanski writes: > Signed-off-by: S?bastien Szymanski Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:05:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:25 +0200 Subject: [Buildroot] [git commit] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221009180918.E57C886ADC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d95faeea442796d0f79cae2bc666824955a668fe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 9 18:07:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:07:14 +0200 Subject: [Buildroot] [git commit] package/libostree: bump to version 2022.6 Message-ID: <20221009180919.16F6786B03@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=197489d89284e6d4e469f823e822c8e75a9b40b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Marcus Folkesson Signed-off-by: Peter Korsgaard --- package/libostree/libostree.hash | 2 +- package/libostree/libostree.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libostree/libostree.hash b/package/libostree/libostree.hash index 6839d5439c..582af4b7b9 100644 --- a/package/libostree/libostree.hash +++ b/package/libostree/libostree.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 914c4d993bc111d7dd30ae9721b6ffe8ab56eb1fd6e81b097b09f400cc1b053f libostree-2022.5.tar.xz +sha256 835ef47d9a0b35a10c77ffd7f0fbd2e2b87f7cccb588da27442a05ff71ffad8c libostree-2022.6.tar.xz sha256 b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c COPYING diff --git a/package/libostree/libostree.mk b/package/libostree/libostree.mk index e0c955bc9a..e99da9d2cb 100644 --- a/package/libostree/libostree.mk +++ b/package/libostree/libostree.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSTREE_VERSION = 2022.5 +LIBOSTREE_VERSION = 2022.6 LIBOSTREE_SOURCE = libostree-$(LIBOSTREE_VERSION).tar.xz LIBOSTREE_SITE = https://github.com/ostreedev/ostree/releases/download/v$(LIBOSTREE_VERSION) From peter at korsgaard.com Sun Oct 9 18:05:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:39 +0200 Subject: [Buildroot] [git commit] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221009180919.0396086AE0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6a184841bd293fd85c5691382da13cbd2068e798 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 00fb7d9842..12e5ca7af4 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.8.0 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sun Oct 9 18:05:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:47 +0200 Subject: [Buildroot] [git commit] package/lrzip: add CPE variables Message-ID: <20221009180919.0D58686AE6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sun Oct 9 18:05:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:32 +0200 Subject: [Buildroot] [git commit] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221009180918.EE35786ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db5c4a06a6da5e64268667c7c07aa4154fec6919 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 3454907bab..d9a7ed1519 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sun Oct 9 18:07:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:07:54 +0200 Subject: [Buildroot] [git commit] package/rt-tests: bump version to 2.4 Message-ID: <20221009180919.2071786ADC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e381fa9cf21f4384ffd6b305829417e9d2dd4d94 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: S??bastien Szymanski Signed-off-by: Peter Korsgaard --- package/rt-tests/rt-tests.hash | 2 +- package/rt-tests/rt-tests.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rt-tests/rt-tests.hash b/package/rt-tests/rt-tests.hash index 3adda60f42..49df8313f9 100644 --- a/package/rt-tests/rt-tests.hash +++ b/package/rt-tests/rt-tests.hash @@ -1,4 +1,4 @@ # From https://mirrors.edge.kernel.org/pub/linux/utils/rt-tests/sha256sums.asc -sha256 b5e7959bcb5c703b2743030751af975ea4e04962e29fc1118f4b605987585735 rt-tests-2.3.tar.xz +sha256 393457f0c91cce57e82b876ecb9b672871f898e6cecafc751548079512bcc808 rt-tests-2.4.tar.xz # locally computed hash sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/rt-tests/rt-tests.mk b/package/rt-tests/rt-tests.mk index 056a4a6723..74290211ce 100644 --- a/package/rt-tests/rt-tests.mk +++ b/package/rt-tests/rt-tests.mk @@ -6,7 +6,7 @@ RT_TESTS_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/rt-tests RT_TESTS_SOURCE = rt-tests-$(RT_TESTS_VERSION).tar.xz -RT_TESTS_VERSION = 2.3 +RT_TESTS_VERSION = 2.4 RT_TESTS_LICENSE = GPL-2.0+ RT_TESTS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 9 20:14:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 22:14:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/libmaxminddb: bump to version 1.7.1 Message-ID: <20221009201432.16067-1-fontaine.fabrice@gmail.com> https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md Signed-off-by: Fabrice Fontaine --- package/libmaxminddb/libmaxminddb.hash | 2 +- package/libmaxminddb/libmaxminddb.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmaxminddb/libmaxminddb.hash b/package/libmaxminddb/libmaxminddb.hash index cfe838f7e5..7e56351c0f 100644 --- a/package/libmaxminddb/libmaxminddb.hash +++ b/package/libmaxminddb/libmaxminddb.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 7620ac187c591ce21bcd7bf352376a3c56a933e684558a1f6bef4bd4f3f98267 libmaxminddb-1.6.0.tar.gz +sha256 e8414f0dedcecbc1f6c31cb65cd81650952ab0677a4d8c49cab603b3b8fb083e libmaxminddb-1.7.1.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/libmaxminddb/libmaxminddb.mk b/package/libmaxminddb/libmaxminddb.mk index 4037f89a15..993b4aec9d 100644 --- a/package/libmaxminddb/libmaxminddb.mk +++ b/package/libmaxminddb/libmaxminddb.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMAXMINDDB_VERSION = 1.6.0 +LIBMAXMINDDB_VERSION = 1.7.1 LIBMAXMINDDB_SITE = \ https://github.com/maxmind/libmaxminddb/releases/download/$(LIBMAXMINDDB_VERSION) LIBMAXMINDDB_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:06:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:06:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 Message-ID: <20221009210613.49541-1-fontaine.fabrice@gmail.com> This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:14:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:14:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/cppzmq: bump to version 4.9.0 Message-ID: <20221009211445.62107-1-fontaine.fabrice@gmail.com> https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 Signed-off-by: Fabrice Fontaine --- package/cppzmq/cppzmq.hash | 2 +- package/cppzmq/cppzmq.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/cppzmq/cppzmq.hash b/package/cppzmq/cppzmq.hash index 31b93275df..3fbee7af28 100644 --- a/package/cppzmq/cppzmq.hash +++ b/package/cppzmq/cppzmq.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7a23639a45f3a0049e11a188e29aaedd10b2f4845f0000cf3e22d6774ebde0af cppzmq-4.8.1.tar.gz +sha256 3fdf5b100206953f674c94d40599bdb3ea255244dcc42fab0d75855ee3645581 cppzmq-4.9.0.tar.gz sha256 7e6db90e2e805c72b3daa77849d1cb5f1f92da0e69750c8a4aa1d86d70704748 LICENSE diff --git a/package/cppzmq/cppzmq.mk b/package/cppzmq/cppzmq.mk index 570ad4e3a3..d702cc174e 100644 --- a/package/cppzmq/cppzmq.mk +++ b/package/cppzmq/cppzmq.mk @@ -4,7 +4,7 @@ # ################################################################################ -CPPZMQ_VERSION = 4.8.1 +CPPZMQ_VERSION = 4.9.0 CPPZMQ_SITE = $(call github,zeromq,cppzmq,v$(CPPZMQ_VERSION)) CPPZMQ_INSTALL_STAGING = YES CPPZMQ_DEPENDENCIES = host-pkgconf zeromq -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:23:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:23:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 Message-ID: <20221009212341.86425-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:32:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:32:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/checksec: bump to version 2.6.0 Message-ID: <20221009213212.92009-1-fontaine.fabrice@gmail.com> Update hash of LICENSE.txt (update in year with https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 Signed-off-by: Fabrice Fontaine --- package/checksec/checksec.hash | 4 ++-- package/checksec/checksec.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/checksec/checksec.hash b/package/checksec/checksec.hash index 41aae8188c..a29866ba07 100644 --- a/package/checksec/checksec.hash +++ b/package/checksec/checksec.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1034459d7cd2b0ee515c2b6b003375fec566fb59c838fc5e1961e1fcf76b54fa checksec-2.5.0.tar.gz -sha256 7888fee828bf56d547fc1f634e40638984148b4fc41373b7626eb465060640de LICENSE.txt +sha256 39d4158f96bdc7533ad6595703375c0046951fe4f6367b831ef92d9c66c1a307 checksec-2.6.0.tar.gz +sha256 55154b4be6dfcb3ff29d1e3648d0d07b3943a5fcc3af7c2e0e799b074734f722 LICENSE.txt diff --git a/package/checksec/checksec.mk b/package/checksec/checksec.mk index 61ef110f90..ed9846ac2d 100644 --- a/package/checksec/checksec.mk +++ b/package/checksec/checksec.mk @@ -4,7 +4,7 @@ # ################################################################################ -CHECKSEC_VERSION = 2.5.0 +CHECKSEC_VERSION = 2.6.0 CHECKSEC_SITE = $(call github,slimm609,checksec.sh,$(CHECKSEC_VERSION)) CHECKSEC_LICENSE = BSD-3-Clause CHECKSEC_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:38:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:38:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/freeipmi: bump to version 1.6.10 Message-ID: <20221009213823.116245-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS Signed-off-by: Fabrice Fontaine --- ...-rename-md2-and-md5-functions-macros.patch | 695 ------------------ package/freeipmi/freeipmi.hash | 2 +- package/freeipmi/freeipmi.mk | 2 +- 3 files changed, 2 insertions(+), 697 deletions(-) delete mode 100644 package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch diff --git a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch b/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch deleted file mode 100644 index 0de5b29c9c..0000000000 --- a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch +++ /dev/null @@ -1,695 +0,0 @@ -From 50eeda7f14c4eaa56aa86ba570a47557456544f2 Mon Sep 17 00:00:00 2001 -From: Albert Chu -Date: Wed, 19 Jan 2022 11:55:55 -0800 -Subject: [PATCH] libfreeipmi: rename md2 and md5 functions / macros - -Static compilation with libfreeipmi can lead to problems if -other software has similarly named md2/md5 functions -(such as md5_init()). Prefix all macros and functions with -'ipmi_' as needed. Update all callers accordingly. - -[Retrieved from: -https://github.com/chu11/freeipmi-mirror/commit/50eeda7f14c4eaa56aa86ba570a47557456544f2] -Signed-off-by: Fabrice Fontaine ---- - ChangeLog | 11 ++ - libfreeipmi/interface/ipmi-lan-interface.c | 48 +++---- - .../interface/ipmi-rmcpplus-interface.c | 2 +- - libfreeipmi/libcommon/ipmi-md2.c | 72 +++++------ - libfreeipmi/libcommon/ipmi-md2.h | 30 ++--- - libfreeipmi/libcommon/ipmi-md5.c | 64 +++++----- - libfreeipmi/libcommon/ipmi-md5.h | 18 +-- - libfreeipmi/util/ipmi-lan-util.c | 120 +++++++++--------- - 8 files changed, 188 insertions(+), 177 deletions(-) - -diff --git a/ChangeLog b/ChangeLog -index 883a195cf..60bf8c323 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,14 @@ -+2021-01-19 Albert Chu -+ -+ * libfreeipmi/libcommon/ipmi-md2.h, -+ libfreeipmi/libcommon/ipmi-md2.c, -+ libfreeipmi/libcommon/ipmi-md5.h, -+ libfreeipmi/libcommon/ipmi-md5.c: Static compilation with -+ libfreeipmi can lead to problems if other software has similarly -+ named md2/md5 functions (such as md5_init()). Prefix all macros -+ and functions with 'ipmi_' as needed. Update all callers -+ accordingly. -+ - 2022-01-18 Fabrice Fontaine - - * configure.ac: use pkg-config to find gcrypt -diff --git a/libfreeipmi/interface/ipmi-lan-interface.c b/libfreeipmi/interface/ipmi-lan-interface.c -index 20099d770..658be53e1 100644 ---- a/libfreeipmi/interface/ipmi-lan-interface.c -+++ b/libfreeipmi/interface/ipmi-lan-interface.c -@@ -533,37 +533,37 @@ assemble_ipmi_lan_pkt (fiid_obj_t obj_rmcp_hdr, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- uint8_t digest[MD2_DIGEST_LENGTH]; -+ ipmi_md2_t ctx; -+ uint8_t digest[IPMI_MD2_DIGEST_LENGTH]; - -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); - -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, msg_data_ptr, msg_data_count); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, digest, MD2_DIGEST_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, digest, IPMI_MD2_DIGEST_LENGTH); -+ ipmi_md2_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- uint8_t digest[MD5_DIGEST_LENGTH]; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, msg_data_ptr, msg_data_count); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, digest, MD5_DIGEST_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ uint8_t digest[IPMI_MD5_DIGEST_LENGTH]; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, digest, IPMI_MD5_DIGEST_LENGTH); -+ ipmi_md5_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } -diff --git a/libfreeipmi/interface/ipmi-rmcpplus-interface.c b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -index 1f462da7e..d1fd0753a 100644 ---- a/libfreeipmi/interface/ipmi-rmcpplus-interface.c -+++ b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -@@ -1134,7 +1134,7 @@ _construct_session_trlr_authentication_code (uint8_t integrity_algorithm, - { - hash_algorithm = IPMI_CRYPT_HASH_MD5; - hash_flags = 0; -- expected_digest_len = MD5_DIGEST_LENGTH; -+ expected_digest_len = IPMI_MD5_DIGEST_LENGTH; - copy_digest_len = IPMI_MD5_128_AUTHENTICATION_CODE_LENGTH; - } - else /* IPMI_INTEGRITY_ALGORITHM_HMAC_SHA256_128 */ -diff --git a/libfreeipmi/libcommon/ipmi-md2.c b/libfreeipmi/libcommon/ipmi-md2.c -index 6e9386be7..076b555bd 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.c -+++ b/libfreeipmi/libcommon/ipmi-md2.c -@@ -101,15 +101,15 @@ static unsigned char S[256] = - 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14 - }; - --#define L ctx->l --#define X ctx->x --#define C ctx->c --#define M ctx->m --#define Mlen ctx->mlen --#define MD2_MAGIC 0xf00fd00d -+#define L ctx->l -+#define X ctx->x -+#define C ctx->c -+#define M ctx->m -+#define Mlen ctx->mlen -+#define IPMI_MD2_MAGIC 0xf00fd00d - - int --md2_init (md2_t *ctx) -+ipmi_md2_init (ipmi_md2_t *ctx) - { - - if (ctx == NULL) -@@ -118,26 +118,26 @@ md2_init (md2_t *ctx) - return (-1); - } - -- ctx->magic = MD2_MAGIC; -+ ctx->magic = IPMI_MD2_MAGIC; - - L = 0; - Mlen = 0; -- memset (X, '\0', MD2_BUFFER_LENGTH); -- memset (C, '\0', MD2_CHKSUM_LENGTH); -- memset (M, '\0', MD2_BLOCK_LENGTH); -+ memset (X, '\0', IPMI_MD2_BUFFER_LENGTH); -+ memset (C, '\0', IPMI_MD2_CHKSUM_LENGTH); -+ memset (M, '\0', IPMI_MD2_BLOCK_LENGTH); - - return (0); - } - - static void --_md2_update_digest_and_checksum (md2_t *ctx) -+_ipmi_md2_update_digest_and_checksum (ipmi_md2_t *ctx) - { - unsigned int j, k; - uint8_t c, t; - - /* Update X */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - X[16+j] = M[j]; - X[32+j] = (X[16+j] ^ X[j]); -@@ -145,9 +145,9 @@ _md2_update_digest_and_checksum (md2_t *ctx) - - t = 0; - -- for (j = 0; j < MD2_ROUNDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_ROUNDS_LENGTH; j++) - { -- for (k = 0; k < MD2_BUFFER_LENGTH; k++) -+ for (k = 0; k < IPMI_MD2_BUFFER_LENGTH; k++) - { - t = X[k] = (X[k] ^ S[t]); - } -@@ -166,7 +166,7 @@ _md2_update_digest_and_checksum (md2_t *ctx) - * Set C[j] to C[j] xor S[c xor L]. - */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - c = M[j]; - C[j] = C[j] ^ S[c ^ L]; -@@ -175,10 +175,10 @@ _md2_update_digest_and_checksum (md2_t *ctx) - } - - int --md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD2_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -187,19 +187,19 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD2_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD2_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD2_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD2_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md2_update_digest_and_checksum (ctx); -+ _ipmi_md2_update_digest_and_checksum (ctx); - -- while ((buflen - bufcount) >= MD2_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD2_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD2_BLOCK_LENGTH); -- bufcount += MD2_BLOCK_LENGTH; -- _md2_update_digest_and_checksum (ctx); -+ memcpy (M, buf + bufcount, IPMI_MD2_BLOCK_LENGTH); -+ bufcount += IPMI_MD2_BLOCK_LENGTH; -+ _ipmi_md2_update_digest_and_checksum (ctx); - } - - Mlen = buflen - bufcount; -@@ -217,33 +217,33 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - } - - static void --_md2_append_padding_and_checksum (md2_t *ctx) -+_ipmi_md2_append_padding_and_checksum (ipmi_md2_t *ctx) - { - unsigned int padlen; - int padindex; - -- padlen = MD2_PADDING_LENGTH - Mlen; -+ padlen = IPMI_MD2_PADDING_LENGTH - Mlen; - padindex = padlen - 1; - -- md2_update_data (ctx, padding[padindex], padlen); -+ ipmi_md2_update_data (ctx, padding[padindex], padlen); - -- md2_update_data (ctx, C, MD2_CHKSUM_LENGTH); -+ ipmi_md2_update_data (ctx, C, IPMI_MD2_CHKSUM_LENGTH); - } - - int --md2_finish (md2_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen) - { -- if (ctx == NULL || ctx->magic != MD2_MAGIC -- || digest == NULL || digestlen < MD2_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC -+ || digest == NULL || digestlen < IPMI_MD2_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md2_append_padding_and_checksum (ctx); -- memcpy (digest, X, MD2_DIGEST_LENGTH); -+ _ipmi_md2_append_padding_and_checksum (ctx); -+ memcpy (digest, X, IPMI_MD2_DIGEST_LENGTH); - -- ctx->magic = ~MD2_MAGIC; -- return (MD2_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD2_MAGIC; -+ return (IPMI_MD2_DIGEST_LENGTH); - } - -diff --git a/libfreeipmi/libcommon/ipmi-md2.h b/libfreeipmi/libcommon/ipmi-md2.h -index c102fce2c..05328e85e 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.h -+++ b/libfreeipmi/libcommon/ipmi-md2.h -@@ -34,26 +34,26 @@ - - #include - --#define MD2_BLOCK_LENGTH 16 --#define MD2_BUFFER_LENGTH 48 --#define MD2_CHKSUM_LENGTH 16 --#define MD2_DIGEST_LENGTH 16 --#define MD2_PADDING_LENGTH 16 --#define MD2_ROUNDS_LENGTH 18 -- --typedef struct __md2 { -+#define IPMI_MD2_BLOCK_LENGTH 16 -+#define IPMI_MD2_BUFFER_LENGTH 48 -+#define IPMI_MD2_CHKSUM_LENGTH 16 -+#define IPMI_MD2_DIGEST_LENGTH 16 -+#define IPMI_MD2_PADDING_LENGTH 16 -+#define IPMI_MD2_ROUNDS_LENGTH 18 -+ -+typedef struct __ipmi_md2 { - uint32_t magic; - uint8_t l; - unsigned int mlen; -- uint8_t x[MD2_BUFFER_LENGTH]; -- uint8_t c[MD2_CHKSUM_LENGTH]; -- uint8_t m[MD2_BLOCK_LENGTH]; --} md2_t; -+ uint8_t x[IPMI_MD2_BUFFER_LENGTH]; -+ uint8_t c[IPMI_MD2_CHKSUM_LENGTH]; -+ uint8_t m[IPMI_MD2_BLOCK_LENGTH]; -+} ipmi_md2_t; - --int md2_init (md2_t *ctx); -+int ipmi_md2_init (ipmi_md2_t *ctx); - --int md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen); - --int md2_finish (md2_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD2_H */ -diff --git a/libfreeipmi/libcommon/ipmi-md5.c b/libfreeipmi/libcommon/ipmi-md5.c -index 17073b85f..c84e350a6 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.c -+++ b/libfreeipmi/libcommon/ipmi-md5.c -@@ -92,7 +92,7 @@ static uint32_t T[64] = - #define D ctx->d - #define M ctx->m - #define Mlen ctx->mlen --#define MD5_MAGIC 0xfb0fdb0d -+#define IPMI_MD5_MAGIC 0xfb0fdb0d - - #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) - #define G(x,y,z) (((x) & (z)) | ((y) & (~(z)))) -@@ -126,7 +126,7 @@ static uint32_t T[64] = - } while (0) - - int --md5_init (md5_t *ctx) -+ipmi_md5_init (ipmi_md5_t *ctx) - { - if (ctx == NULL) - { -@@ -134,13 +134,13 @@ md5_init (md5_t *ctx) - return (-1); - } - -- ctx->magic = MD5_MAGIC; -+ ctx->magic = IPMI_MD5_MAGIC; - - Mlen = 0; - ctx->bytes_mod_64 = 0; - ctx->bit_count[0] = 0; - ctx->bit_count[1] = 0; -- memset (M, '\0', MD5_BLOCK_LENGTH); -+ memset (M, '\0', IPMI_MD5_BLOCK_LENGTH); - - /* initial values are listed low-order byte first */ - A = 0x67452301; -@@ -152,16 +152,16 @@ md5_init (md5_t *ctx) - } - - static void --_md5_update_digest (md5_t *ctx) -+_ipmi_md5_update_digest (ipmi_md5_t *ctx) - { - uint32_t AA, BB, CC, DD; -- uint32_t X[MD5_BLOCK_WORDS_LENGTH]; -+ uint32_t X[IPMI_MD5_BLOCK_WORDS_LENGTH]; - unsigned int j; - - /* Note there are no endian issues here, compiler is required to - * handle shifts correctly - */ -- for (j = 0; j < MD5_BLOCK_WORDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD5_BLOCK_WORDS_LENGTH; j++) - X[j] = ((uint32_t)M[j*4] - | ((uint32_t)M[j*4+1] << 8) - | ((uint32_t)M[j*4+2] << 16) -@@ -251,7 +251,7 @@ _md5_update_digest (md5_t *ctx) - } - - static void --_md5_update_count (md5_t *ctx, unsigned int buflen) -+_ipmi_md5_update_count (ipmi_md5_t *ctx, unsigned int buflen) - { - - /* Use two uint32_t integers to hold our 64 bit count. -@@ -272,10 +272,10 @@ _md5_update_count (md5_t *ctx, unsigned int buflen) - } - - int --md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD5_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -284,28 +284,28 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD5_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD5_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD5_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD5_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md5_update_digest (ctx); -- _md5_update_count (ctx, bufcount); -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, bufcount); - -- while ((buflen - bufcount) >= MD5_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD5_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD5_BLOCK_LENGTH); -- bufcount += MD5_BLOCK_LENGTH; -- _md5_update_digest (ctx); -- _md5_update_count (ctx, MD5_BLOCK_LENGTH); -+ memcpy (M, buf + bufcount, IPMI_MD5_BLOCK_LENGTH); -+ bufcount += IPMI_MD5_BLOCK_LENGTH; -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, IPMI_MD5_BLOCK_LENGTH); - } - - Mlen = buflen - bufcount; - if (Mlen > 0) - { - memcpy (M, buf + bufcount, Mlen); -- _md5_update_count (ctx, Mlen); -+ _ipmi_md5_update_count (ctx, Mlen); - } - } - else -@@ -313,14 +313,14 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - /* Not enough data to update digest, just copy in data */ - memcpy (M + Mlen, buf, buflen); - Mlen += buflen; -- _md5_update_count (ctx, buflen); -+ _ipmi_md5_update_count (ctx, buflen); - } - - return (buflen); - } - - static void --_md5_append_padding_and_length (md5_t *ctx) -+_ipmi_md5_append_padding_and_length (ipmi_md5_t *ctx) - { - unsigned int padlen; - char length[8]; -@@ -348,23 +348,23 @@ _md5_append_padding_and_length (md5_t *ctx) - length[6] = (ctx->bit_count[0] & 0x00ff0000) >> 16; - length[7] = (ctx->bit_count[0] & 0xff000000) >> 24; - -- md5_update_data (ctx, padding, padlen); -- md5_update_data (ctx, length, 8); -+ ipmi_md5_update_data (ctx, padding, padlen); -+ ipmi_md5_update_data (ctx, length, 8); - } - - int --md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen) - { -- uint8_t buf[MD5_DIGEST_LENGTH]; -+ uint8_t buf[IPMI_MD5_DIGEST_LENGTH]; - -- if (ctx == NULL || ctx->magic != MD5_MAGIC -- || digest == NULL || digestlen < MD5_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC -+ || digest == NULL || digestlen < IPMI_MD5_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md5_append_padding_and_length (ctx); -+ _ipmi_md5_append_padding_and_length (ctx); - - /* Note there are no endian issues here, compiler is required to - * handle bitmasks and shifts correctly -@@ -387,7 +387,7 @@ md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) - buf[14] = (D & 0x00ff0000) >> 16; - buf[15] = (D & 0xff000000) >> 24; - -- memcpy (digest, buf, MD5_DIGEST_LENGTH); -- ctx->magic = ~MD5_MAGIC; -- return (MD5_DIGEST_LENGTH); -+ memcpy (digest, buf, IPMI_MD5_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD5_MAGIC; -+ return (IPMI_MD5_DIGEST_LENGTH); - } -diff --git a/libfreeipmi/libcommon/ipmi-md5.h b/libfreeipmi/libcommon/ipmi-md5.h -index 0f86f1754..6b863ef36 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.h -+++ b/libfreeipmi/libcommon/ipmi-md5.h -@@ -34,11 +34,11 @@ - - #include - --#define MD5_BLOCK_LENGTH 64 --#define MD5_BLOCK_WORDS_LENGTH (MD5_BLOCK_LENGTH/4) --#define MD5_DIGEST_LENGTH 16 -+#define IPMI_MD5_BLOCK_LENGTH 64 -+#define IPMI_MD5_BLOCK_WORDS_LENGTH (IPMI_MD5_BLOCK_LENGTH/4) -+#define IPMI_MD5_DIGEST_LENGTH 16 - --typedef struct __md5 { -+typedef struct __ipmi_md5 { - uint32_t magic; - unsigned int mlen; - unsigned int bytes_mod_64; -@@ -47,13 +47,13 @@ typedef struct __md5 { - uint32_t b; - uint32_t c; - uint32_t d; -- uint8_t m[MD5_BLOCK_LENGTH]; --} md5_t; -+ uint8_t m[IPMI_MD5_BLOCK_LENGTH]; -+} ipmi_md5_t; - --int md5_init (md5_t *ctx); -+int ipmi_md5_init (ipmi_md5_t *ctx); - --int md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen); - --int md5_finish (md5_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD5_H */ -diff --git a/libfreeipmi/util/ipmi-lan-util.c b/libfreeipmi/util/ipmi-lan-util.c -index cd269fcb9..a374acc8d 100644 ---- a/libfreeipmi/util/ipmi-lan-util.c -+++ b/libfreeipmi/util/ipmi-lan-util.c -@@ -281,33 +281,33 @@ ipmi_lan_check_session_authentication_code (fiid_obj_t obj_lan_session_hdr_rs, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, buf, len); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, buf, len); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, buf, len); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, buf, len); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - -@@ -451,45 +451,45 @@ ipmi_lan_check_packet_session_authentication_code (const void *pkt, - memcpy (pwbuf, authentication_code_data, authentication_code_data_len); - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md2_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md2_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md2_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md5_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md5_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md5_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - else /* authentication_type == IPMI_AUTHENTICATION_TYPE_STRAIGHT_PASSWORD_KEY diff --git a/package/freeipmi/freeipmi.hash b/package/freeipmi/freeipmi.hash index 05fb50bd4c..bc22d2ff6b 100644 --- a/package/freeipmi/freeipmi.hash +++ b/package/freeipmi/freeipmi.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 f25e1c35f3d0f1b5a99cc31ecc2353ca83ed46a15163842fba870127dc9c8206 freeipmi-1.6.9.tar.gz +sha256 fce4a1e401b6189c103d2b1203261d0bfbf45985c6f3fa44c51b186b13fe7a7d freeipmi-1.6.10.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.bmc-watchdog sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.ipmiconsole diff --git a/package/freeipmi/freeipmi.mk b/package/freeipmi/freeipmi.mk index b26ed0c0bf..916f2eb68a 100644 --- a/package/freeipmi/freeipmi.mk +++ b/package/freeipmi/freeipmi.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREEIPMI_VERSION = 1.6.9 +FREEIPMI_VERSION = 1.6.10 FREEIPMI_SITE = https://ftp.gnu.org/gnu/freeipmi FREEIPMI_LICENSE = GPL-3.0+, BSD-like (sunbmc) FREEIPMI_LICENSE_FILES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:49:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:49:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: bump to version 2 Message-ID: <20221009214945.128155-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Replace rjk_cv_python24 by rjk_cv_python3 due to https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md Signed-off-by: Fabrice Fontaine --- ...v3-attributes-according-to-draft-iet.patch | 30 ------------------- package/gesftpserver/gesftpserver.hash | 2 +- package/gesftpserver/gesftpserver.mk | 4 +-- 3 files changed, 3 insertions(+), 33 deletions(-) delete mode 100644 package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch diff --git a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch b/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch deleted file mode 100644 index 3697d0e525..0000000000 --- a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4b5c7eb63894bd2b1fedeb2a8e9bd16bf3c8c555 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Bernd=20Holzm=C3=BCller?= - -Date: Mon, 11 Feb 2019 23:57:01 +0100 -Subject: [PATCH] Change order of v3-attributes according to - draft-ietf-secsh-filexfer-00/02 - -[yann.morin.1998 at free.fr: backport from upstream] -Signed-off-by: "Yann E. MORIN" ---- - v3.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/v3.c b/v3.c -index 57cc31e..1fd86ad 100644 ---- a/v3.c -+++ b/v3.c -@@ -121,8 +121,8 @@ static void v3_sendattrs(struct sftpjob *job, const struct sftpattr *attrs) { - fatal("sending out-of-range mtime"); - if(a != attrs->atime.seconds) - fatal("sending out-of-range mtime"); -- sftp_send_uint32(job->worker, m); - sftp_send_uint32(job->worker, a); -+ sftp_send_uint32(job->worker, m); - } - /* Note that we just discard unknown bits rather than reporting errors. */ - } --- -2.14.1 - diff --git a/package/gesftpserver/gesftpserver.hash b/package/gesftpserver/gesftpserver.hash index 790cbe97c2..6d910a84dd 100644 --- a/package/gesftpserver/gesftpserver.hash +++ b/package/gesftpserver/gesftpserver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4963b85787de3485085a5356c671c58b8b33125f528ff1b2fe8b534ed8a0c1bd sftpserver-1.tar.gz +sha256 b18b10405ef2b05c45450aafd6803f69efb4d2138e4e07fd186c1618027ee169 sftpserver-2.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index 20ad92d25a..b47ec1c5d3 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -4,7 +4,7 @@ # ################################################################################ -GESFTPSERVER_VERSION = 1 +GESFTPSERVER_VERSION = 2 GESFTPSERVER_SOURCE = sftpserver-$(GESFTPSERVER_VERSION).tar.gz GESFTPSERVER_SITE = http://www.greenend.org.uk/rjk/sftpserver GESFTPSERVER_LICENSE = GPL-2.0+ @@ -25,7 +25,7 @@ GESFTPSERVER_DEPENDENCIES += \ # Python on the host is only used for tests, which we don't use in # Buildroot -GESFTPSERVER_CONF_ENV += rjk_cv_python24=false +GESFTPSERVER_CONF_ENV += rjk_cv_python3=false # openssh/dropbear looks here define GESFTPSERVER_ADD_SYMLINK -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:58:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:58:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/gmrender-resurrect: bump to version 0.1 Message-ID: <20221009215801.227838-1-fontaine.fabrice@gmail.com> gmrender-resurrect uses threads since https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 Signed-off-by: Fabrice Fontaine --- package/gmrender-resurrect/Config.in | 2 +- package/gmrender-resurrect/gmrender-resurrect.hash | 2 +- package/gmrender-resurrect/gmrender-resurrect.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gmrender-resurrect/Config.in b/package/gmrender-resurrect/Config.in index db655ad7f4..de52410a73 100644 --- a/package/gmrender-resurrect/Config.in +++ b/package/gmrender-resurrect/Config.in @@ -1,7 +1,7 @@ config BR2_PACKAGE_GMRENDER_RESURRECT bool "gmrender-resurrect" depends on BR2_USE_WCHAR # gstreamer1 -> libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer1 -> libglib2, libupnp + depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_MMU # gstreamer1 select BR2_PACKAGE_GSTREAMER1 select BR2_PACKAGE_GST1_PLUGINS_BASE # run-time only diff --git a/package/gmrender-resurrect/gmrender-resurrect.hash b/package/gmrender-resurrect/gmrender-resurrect.hash index 526b2b6c34..f14abffc3b 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.hash +++ b/package/gmrender-resurrect/gmrender-resurrect.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c3a9c80c7058a9a1f32175da25a564fb3021a7055c2df3941e8da8860a509009 gmrender-resurrect-0.0.9.tar.gz +sha256 550b07bc6a073176ad7de0efd603663c9875311dfb81ae1075263e3fd6974335 gmrender-resurrect-0.1.tar.gz sha256 c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42 COPYING diff --git a/package/gmrender-resurrect/gmrender-resurrect.mk b/package/gmrender-resurrect/gmrender-resurrect.mk index 4a7efd71ab..77ac83ca41 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.mk +++ b/package/gmrender-resurrect/gmrender-resurrect.mk @@ -4,7 +4,7 @@ # ################################################################################ -GMRENDER_RESURRECT_VERSION = 0.0.9 +GMRENDER_RESURRECT_VERSION = 0.1 GMRENDER_RESURRECT_SITE = $(call github,hzeller,gmrender-resurrect,v$(GMRENDER_RESURRECT_VERSION)) # Original distribution does not have default configure, # so we need to autoreconf: -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 22:02:50 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 10 Oct 2022 00:02:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 Message-ID: <20221009220250.310026-1-fontaine.fabrice@gmail.com> This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 22:06:38 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 10 Oct 2022 00:06:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/isl: bump to version 0.25 Message-ID: <20221009220638.319188-1-fontaine.fabrice@gmail.com> https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 Signed-off-by: Fabrice Fontaine --- package/isl/isl.hash | 2 +- package/isl/isl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/isl/isl.hash b/package/isl/isl.hash index 001fc9d115..46d8e920f3 100644 --- a/package/isl/isl.hash +++ b/package/isl/isl.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 043105cc544f416b48736fff8caf077fb0663a717d06b1113f16e391ac99ebad isl-0.24.tar.xz +sha256 be7b210647ccadf90a2f0b000fca11a4d40546374a850db67adb32fad4b230d9 isl-0.25.tar.xz sha256 3a2c398103f6bca0f50a9a9465deca9230b370b0212af5fdf31ed88a36215c30 LICENSE diff --git a/package/isl/isl.mk b/package/isl/isl.mk index 51e608b304..ce9aaecebc 100644 --- a/package/isl/isl.mk +++ b/package/isl/isl.mk @@ -4,7 +4,7 @@ # ################################################################################ -ISL_VERSION = 0.24 +ISL_VERSION = 0.25 ISL_SOURCE = isl-$(ISL_VERSION).tar.xz ISL_SITE = https://libisl.sourceforge.io ISL_LICENSE = MIT -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 9 23:37:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 9 Oct 2022 19:37:47 -0400 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <20221009153521.12444-1-romain.naour@gmail.com> References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: > > Backport upstream commit for x86_64 builds with -Os reported by [1]. > > [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 I think this also fixes an issue in autobuilders, see: https://patchwork.ozlabs.org/project/buildroot/patch/20220927031702.2918414-1-james.hilliard1 at gmail.com/ http://autobuild.buildroot.net/results/5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > > Signed-off-by: Romain Naour Reviewed-by: James Hilliard > --- > .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > > diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > new file mode 100644 > index 0000000000..4470324f1c > --- /dev/null > +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > @@ -0,0 +1,48 @@ > +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 > +From: Adhemerval Zanella Netto > +Date: Wed, 21 Sep 2022 10:51:08 -0300 > +Subject: [PATCH] x86: Fix -Os build (BZ #29576) > + > +The compiler might transform __stpcpy calls (which are routed to > +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy > +multiarch implementation does not build any working symbol due > +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). > + > +Checked on x86_64-linux-gnu. > +Reviewed-by: Carlos O'Donell > +Tested-by: Carlos O'Donell > + > +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) This is probably better than mine since I had applied from patchwork before it was applied upstream. > +Signed-off-by: Romain Naour > +--- > + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ > + 1 file changed, 18 insertions(+) > + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S > + > +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S > +new file mode 100644 > +index 0000000000..19439c553d > +--- /dev/null > ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S > +@@ -0,0 +1,18 @@ > ++/* Copyright (C) 2022 Free Software Foundation, Inc. > ++ This file is part of the GNU C Library. > ++ > ++ The GNU C Library is free software; you can redistribute it and/or > ++ modify it under the terms of the GNU Lesser General Public > ++ License as published by the Free Software Foundation; either > ++ version 2.1 of the License, or (at your option) any later version. > ++ > ++ The GNU C Library is distributed in the hope that it will be useful, > ++ but WITHOUT ANY WARRANTY; without even the implied warranty of > ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > ++ Lesser General Public License for more details. > ++ > ++ You should have received a copy of the GNU Lesser General Public > ++ License along with the GNU C Library; if not, see > ++ . */ > ++ > ++#include "../strcpy.S" > +-- > +2.34.3 > + > -- > 2.34.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Mon Oct 10 00:35:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 9 Oct 2022 18:35:15 -0600 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility Message-ID: <20221010003515.796446-1-james.hilliard1@gmail.com> Backport a patch fixing compatibility with upcoming make 4.4. Fixes: - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 Signed-off-by: James Hilliard --- ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 100644 index 0000000000..0c82d7abbe --- /dev/null +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1,117 @@ +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 +From: Sergei Trofimovich +Date: Tue, 13 Sep 2022 13:39:13 -0400 +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 + [BZ# 29564] + +make-4.4 will add long flags to MAKEFLAGS variable: + + * WARNING: Backward-incompatibility! + Previously only simple (one-letter) options were added to the MAKEFLAGS + variable that was visible while parsing makefiles. Now, all options + are available in MAKEFLAGS. + +This causes locale builds to fail when long options are used: + + $ make --shuffle + ... + make -C localedata install-locales + make: invalid shuffle mode: '1662724426r' + +The change fixes it by passing eash option via whitespace and dashes. +That way option is appended to both single-word form and whitespace +separated form. + +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering +out --long-options. Otherwise options like --shuffle flag enable silent +mode unintentionally. $(silent-make) variable consolidates the checks. + +Resolves: BZ# 29564 + +CC: Paul Smith +CC: Siddhesh Poyarekar +Signed-off-by: Sergei Trofimovich +Reviewed-by: Siddhesh Poyarekar +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +2d7ed98add14f75041499ac189696c9bd3d757fe] +--- + Makeconfig | 18 +++++++++++++++++- + Makerules | 4 ++-- + elf/rtld-Rules | 2 +- + 3 files changed, 20 insertions(+), 4 deletions(-) + +diff --git a/Makeconfig b/Makeconfig +index f8164a0025..842f49eb58 100644 +--- a/Makeconfig ++++ b/Makeconfig +@@ -43,6 +43,22 @@ else + $(error objdir must be defined by the build-directory Makefile) + endif + ++# Did we request 'make -s' run? "yes" or "no". ++# Starting from make-4.4 MAKEFLAGS now contains long ++# options like '--shuffle'. To detect presence of 's' ++# we pick first word with short options. Long options ++# are guaranteed to come after whitespace. We use '-' ++# prefix to always have a word before long options ++# even if no short options were passed. ++# Typical MAKEFLAGS values to watch for: ++# "rs --shuffle=42" (silent) ++# " --shuffle" (not silent) ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) ++silent-make := no ++else ++silent-make := yes ++endif ++ + # Root of the sysdeps tree. + sysdep_dir := $(..)sysdeps + export sysdep_dir := $(sysdep_dir) +@@ -917,7 +933,7 @@ endif + # umpteen zillion filenames along with it (we use `...' instead) + # but we don't want this echoing done when the user has said + # he doesn't want to see commands echoed by using -s. +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s ++ifeq ($(silent-make),yes) # if -s + +cmdecho := echo >/dev/null + else # not -s + +cmdecho := echo +diff --git a/Makerules b/Makerules +index d1e139d03c..09c0cf8357 100644 +--- a/Makerules ++++ b/Makerules +@@ -794,7 +794,7 @@ endif + # Maximize efficiency by minimizing the number of rules. + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. + # Don't define any builtin rules. +-MAKEFLAGS := $(MAKEFLAGS)r ++MAKEFLAGS := $(MAKEFLAGS) -r + + # Generic rule for making directories. + %/: +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +diff --git a/elf/rtld-Rules b/elf/rtld-Rules +index ca00dd1fe2..3c5e273f2b 100644 +--- a/elf/rtld-Rules ++++ b/elf/rtld-Rules +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ + mv -f $@T $@ + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +-- +2.34.1 + -- 2.34.1 From ju.o at free.fr Mon Oct 10 03:09:37 2022 From: ju.o at free.fr (Julien Olivain) Date: Sun, 9 Oct 2022 23:09:37 -0400 Subject: [Buildroot] [PATCH 1/1] support/config-fragments/autobuild: fix bootlin-xtensa-uclibc.config Message-ID: <20221010030937.6432-1-ju.o@free.fr> Commit 4cbf7336914f25478aea943456ba7dc3c892c21a "arch/xtensa: custom configuration requires an overlay" added an error message if BR2_XTENSA_CUSTOM is set and BR_ARCH_XTENSA_OVERLAY_FILE is unset. When testing a package with the command: ./utils/test-pkg --all --package somepackage bootlin-xtensa-uclibc toolchain is always failing with error in the logfile: arch/arch.mk.xtensa:4: *** No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting. Stop. This commit fixes the toolchain config fragment by adding the same overlay file found in qemu_xtensa_lx60_defconfig. Signed-off-by: Julien Olivain --- support/config-fragments/autobuild/bootlin-xtensa-uclibc.config | 1 + 1 file changed, 1 insertion(+) diff --git a/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config b/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config index c44525b203..780a41df47 100644 --- a/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config +++ b/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config @@ -1,5 +1,6 @@ BR2_xtensa=y BR2_XTENSA_CUSTOM=y BR2_XTENSA_LITTLE_ENDIAN=y +BR2_XTENSA_OVERLAY_FILE="https://github.com/jcmvbkbc/xtensa-toolchain-build/raw/95291b7c39e6f790d0b2f062c945a630290f2c81/overlays/xtensa_dc233c.tar.gz" BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE=y -- 2.37.3 From romain.naour at smile.fr Mon Oct 10 07:34:51 2022 From: romain.naour at smile.fr (Romain Naour) Date: Mon, 10 Oct 2022 09:34:51 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> Hello James, Le 10/10/2022 ? 01:37, James Hilliard a ?crit?: > On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: >> >> Backport upstream commit for x86_64 builds with -Os reported by [1]. >> >> [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 >> >> Fixes: >> https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 >> https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 > > I think this also fixes an issue in autobuilders, see: > https://patchwork.ozlabs.org/project/buildroot/patch/20220927031702.2918414-1-james.hilliard1 at gmail.com/ Sorry I missed it in the patchwork it was on the second page already... > > http://autobuild.buildroot.net/results/5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > >> >> Signed-off-by: Romain Naour > > Reviewed-by: James Hilliard > >> --- >> .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ >> 1 file changed, 48 insertions(+) >> create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> >> diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> new file mode 100644 >> index 0000000000..4470324f1c >> --- /dev/null >> +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> @@ -0,0 +1,48 @@ >> +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 >> +From: Adhemerval Zanella Netto >> +Date: Wed, 21 Sep 2022 10:51:08 -0300 >> +Subject: [PATCH] x86: Fix -Os build (BZ #29576) >> + >> +The compiler might transform __stpcpy calls (which are routed to >> +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy >> +multiarch implementation does not build any working symbol due >> +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). >> + >> +Checked on x86_64-linux-gnu. >> +Reviewed-by: Carlos O'Donell >> +Tested-by: Carlos O'Donell >> + >> +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) > > This is probably better than mine since I had applied from patchwork before > it was applied upstream. Yes maybe... even it doesn't come from the 2.36 stable branch. I replied on the bug report, so the commit may be backported soon. Best regards, Romain > >> +Signed-off-by: Romain Naour >> +--- >> + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ >> + 1 file changed, 18 insertions(+) >> + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S >> + >> +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S >> +new file mode 100644 >> +index 0000000000..19439c553d >> +--- /dev/null >> ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S >> +@@ -0,0 +1,18 @@ >> ++/* Copyright (C) 2022 Free Software Foundation, Inc. >> ++ This file is part of the GNU C Library. >> ++ >> ++ The GNU C Library is free software; you can redistribute it and/or >> ++ modify it under the terms of the GNU Lesser General Public >> ++ License as published by the Free Software Foundation; either >> ++ version 2.1 of the License, or (at your option) any later version. >> ++ >> ++ The GNU C Library is distributed in the hope that it will be useful, >> ++ but WITHOUT ANY WARRANTY; without even the implied warranty of >> ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >> ++ Lesser General Public License for more details. >> ++ >> ++ You should have received a copy of the GNU Lesser General Public >> ++ License along with the GNU C Library; if not, see >> ++ . */ >> ++ >> ++#include "../strcpy.S" >> +-- >> +2.34.3 >> + >> -- >> 2.34.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mf at go-sys.de Mon Oct 10 07:56:24 2022 From: mf at go-sys.de (Michael Fischer) Date: Mon, 10 Oct 2022 09:56:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/sdl2: bump version to 2.24.1 Message-ID: <20221010075624.8662-1-mf@go-sys.de> Signed-off-by: Michael Fischer --- package/sdl2/sdl2.hash | 4 ++-- package/sdl2/sdl2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sdl2/sdl2.hash b/package/sdl2/sdl2.hash index 981c98531e..782c552c52 100644 --- a/package/sdl2/sdl2.hash +++ b/package/sdl2/sdl2.hash @@ -1,4 +1,4 @@ -# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.0.tar.gz.sig -sha256 91e4c34b1768f92d399b078e171448c6af18cafda743987ed2064a28954d6d97 SDL2-2.24.0.tar.gz +# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.1.tar.gz.sig +sha256 bc121588b1105065598ce38078026a414c28ea95e66ed2adab4c44d80b309e1b SDL2-2.24.1.tar.gz # Locally calculated sha256 fcb07e07ac6bc8b2fcf047b50431ef4ebe5b619d7ca7c82212018309a9067426 LICENSE.txt diff --git a/package/sdl2/sdl2.mk b/package/sdl2/sdl2.mk index 4585c33c9b..28e2c5cb36 100644 --- a/package/sdl2/sdl2.mk +++ b/package/sdl2/sdl2.mk @@ -4,7 +4,7 @@ # ################################################################################ -SDL2_VERSION = 2.24.0 +SDL2_VERSION = 2.24.1 SDL2_SOURCE = SDL2-$(SDL2_VERSION).tar.gz SDL2_SITE = http://www.libsdl.org/release SDL2_LICENSE = Zlib -- 2.20.1 From james.hilliard1 at gmail.com Mon Oct 10 08:49:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 02:49:43 -0600 Subject: [Buildroot] [PATCH 1/2] package/ell: bump to version 0.53 Message-ID: <20221010084944.685684-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/ell/ell.hash | 2 +- package/ell/ell.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ell/ell.hash b/package/ell/ell.hash index 9affa390b8..68832c3201 100644 --- a/package/ell/ell.hash +++ b/package/ell/ell.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/libs/ell/sha256sums.asc -sha256 a7ff8ecbc76b187d942dd22b61cb489711400897c790319ffb7e944791687c3f ell-0.49.tar.xz +sha256 a7d0df846af839bbea1b80f292166371070328854b3fa785b5c607fe600552ad ell-0.53.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/ell/ell.mk b/package/ell/ell.mk index 9735865eae..b27d6feb65 100644 --- a/package/ell/ell.mk +++ b/package/ell/ell.mk @@ -4,7 +4,7 @@ # ################################################################################ -ELL_VERSION = 0.49 +ELL_VERSION = 0.53 ELL_SOURCE = ell-$(ELL_VERSION).tar.xz ELL_SITE = $(BR2_KERNEL_MIRROR)/linux/libs/ell ELL_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 10 08:49:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 02:49:44 -0600 Subject: [Buildroot] [PATCH 2/2] package/iwd: bump to version 1.30 In-Reply-To: <20221010084944.685684-1-james.hilliard1@gmail.com> References: <20221010084944.685684-1-james.hilliard1@gmail.com> Message-ID: <20221010084944.685684-2-james.hilliard1@gmail.com> Drop patch which is now upstream. Signed-off-by: James Hilliard --- ...-src-storage.c-fix-build-with-uclibc.patch | 37 ------------------- package/iwd/iwd.hash | 2 +- package/iwd/iwd.mk | 2 +- 3 files changed, 2 insertions(+), 39 deletions(-) delete mode 100644 package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch diff --git a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch b/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch deleted file mode 100644 index 55fdaa86fd..0000000000 --- a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 99e74ade2ea892e6d0b070bec1df6a135ce2c8b3 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Mar 2022 16:35:49 +0100 -Subject: [PATCH] src/storage.c: fix build with uclibc - -explicit_bzero is used in src/storage.c since commit -01cd8587606bf2da1af245163150589834126c1c but src/missing.h is not -included, as a result build with uclibc fails on: - -/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init': -storage.c:(.text+0x13a4): undefined reference to `explicit_bzero' - -Fixes: - - http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1 - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://lists.01.org/hyperkitty/list/iwd at lists.01.org/thread/WB2XXRBUDHC5IVFDEOJBK23JHPURL427] ---- - src/storage.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/storage.c b/src/storage.c -index 82a72443..aa8066b1 100644 ---- a/src/storage.c -+++ b/src/storage.c -@@ -44,6 +44,7 @@ - #include - #include "ell/useful.h" - -+#include "src/missing.h" - #include "src/common.h" - #include "src/storage.h" - #include "src/crypto.h" --- -2.35.1 - diff --git a/package/iwd/iwd.hash b/package/iwd/iwd.hash index 1c34aa0a90..e7971cd637 100644 --- a/package/iwd/iwd.hash +++ b/package/iwd/iwd.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/network/wireless/sha256sums.asc -sha256 3f138e03301beb2afc7b385a62f56db17059137857ab579f269c4e441783e760 iwd-1.25.tar.xz +sha256 9fd13512dc27d83efb8d341f7df98f5488f70131686021fcd0d93fc97af013b8 iwd-1.30.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..4a818f0b82 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -4,7 +4,7 @@ # ################################################################################ -IWD_VERSION = 1.25 +IWD_VERSION = 1.30 IWD_SOURCE = iwd-$(IWD_VERSION).tar.xz IWD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/wireless IWD_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 10 09:04:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 03:04:18 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.6 Message-ID: <20221010090418.1604258-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..f69bbf7fb8 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 ed3aa1e217ade804e76651fe8e7803becc0b7831c42d6f31b8636f07f9b2260b maturin-0.13.6.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..8204a8354f 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.6 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/78/25/c418cf59a7735a065405d9ab63423603c38bd55712ce0f5e11f2ae248cf9 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 10 15:12:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 10 Oct 2022 17:12:57 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: References: <20221004143943.1456694-1-nunes.erico@gmail.com> <20221006221236.7dd6580a@windsurf> Message-ID: <20221010171257.6076a845@windsurf> Hello Erico, On Fri, 7 Oct 2022 08:46:10 +0200 Erico Nunes wrote: > I did check for related work in upstream and there are two relevant reports: > https://github.com/rhboot/efivar/issues/130 reports the makeguids > issue in cross compilation. There is no solution proposal for it in > its current state though. > One potential solution is to change the build to something less > custom, like meson, then in https://github.com/rhboot/efivar/pull/216 > there is a draft pull request to actually move it to meson. > Assuming that gets in for the next efivar release, the Buildroot > specific patch could be dropped by then. > I think what I can do at this point is test that locally to see if it > addresses the major problem that we have with Buildroot for a future > version bump and provide some feedback there. Thanks for this work! Indeed, if a meson-based build system is in progress, it doesn't make sense to work on a better patch/solution for the existing hand-written build system. Let's wait for the meson-based build system to arrive. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 10 06:46:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 10 Oct 2022 06:46:03 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 Message-ID: <20221010064610.388468291C@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-09 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 4 | 0 | 10 | 2022.05.x | 13 | 16 | 0 | 29 | 2022.08.x | 12 | 12 | 0 | 24 | master | 144 | 690 | 7 | 841 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 226 berkeleydb-5.3.28 | 21 host-binutils-2.38 | 19 host-gcc-initial-11.3.0 | 19 bearssl-0.6 | 17 linux-6.0 | 15 gpm-1.20.7 | 14 ocf-linux-20171122 | 14 host-f2fs-tools-1.15.0 | 13 ca-certificates-20211016 | 12 igd2-for-linux-2.1 | 12 crun-1.5 | 11 slang-2.3.2 | 11 host-sentry-cli-1.59.0 | 10 libnss-3.83 | 8 sysvinit-2.99 | 8 btrfs-progs-5.16.2 | 7 coremark-pro-1.1.2743 | 7 host-gcc-final-11.3.0 | 7 host-go-1.19.1 | 7 perl-5.34.1 | 7 autofs-5.1.8 | 6 brltty | 5 fbset-2.1 | 5 host-gcc-initial-10.4.0 | 5 libglib2-2.72.3 | 5 batman-adv-2021.4 | 4 efivar-38 | 4 elfutils-0.186 | 4 sdl-1.2.15 | 4 toolchain-external-codescap... | 4 unknown | 4 cryptodev-linux-1.12 | 3 dieharder-3.31.1 | 3 exempi-2.6.1 | 3 file-5.41 | 3 frotz-2.54 | 3 gerbera-1.10.0 | 3 hdparm-9.63 | 3 host-binutils-2.37 | 3 host-gcc-initial-12.2.0 | 3 host-pahole-73383b3a39afe86... | 3 host-rust-1.64.0 | 3 host-spirv-llvm-translator-... | 3 libarchive-3.6.1 | 3 libdeflate-1.12 | 3 libee-0.4.1 | 3 linux-5.10.145-cip17 | 3 lxc-4.0.12 | 3 mmc-utils-d40ec535b9d4e4c97... | 3 musepack-r475 | 3 ntp-4.2.8p15 | 3 systemd-250.4 | 3 zeek-4.1.1 | 3 zlib-ng-2.0.6 | 3 cryptopp-8.6.0 | 2 dahdi-linux-5c840cf43838e06... | 2 dash-0.5.11.5 | 2 dmraid-1.0.0.rc16-3 | 2 dropbear-2022.82 | 2 frr-8.3.1 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 gobject-introspection | 2 host-berkeleydb-5.3.28 | 2 host-binutils-2.39 | 2 libcap-ng-0.8.3 | 2 linux-5.10.145-cip17-rt7 | 2 ltp-testsuite-20220930 | 2 mongodb-4.2.18 | 2 musl-1.2.3 | 2 netsurf-3.10 | 2 wolfssl-5.5.1 | 2 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 android-tools-4.2.2+git2013... | 1 apcupsd-3.14.14 | 1 apparmor-3.0.4 | 1 assimp-5.2.5 | 1 augeas-1.12.0 | 1 azure-iot-sdk-c-LTS_07_2022... | 1 binutils-arc-2020.09-release | 1 boost-1.80.0 | 1 brotli-1.0.9 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dhcp-4.4.3 | 1 duma-2.5.15 | 1 erlang-22.3.4.22 | 1 expat-2.4.9 | 1 f2fs-tools-1.15.0 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fwts-22.09.00 | 1 gdb-11.2 | 1 gobject-introspection-1.72.0 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-riscv-isa-sim-1.1.0 | 1 igh-ethercat-1.5.2 | 1 lcdproc-0.5.9 | 1 lcms2-2.13.1 | 1 libblockdev-2.26 | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libgpg-error-1.45 | 1 liblog4c-localtime-1.0 | 1 libmdbx-0.11.11 | 1 libunwind-1.6.2 | 1 libusb-1.0.26 | 1 linux-pam-1.5.2 | 1 linuxptp-3.1.1 | 1 liquid-dsp-1.4.0 | 1 lpc32xxcdl-2.11 | 1 lttng-modules-2.13.1 | 1 luaossl-20220711-0 | 1 lz4-1.9.3 | 1 make: *** wait: No child pr... | 1 mariadb-10.3.36 | 1 memcached-1.6.16 | 1 mender-3.4.0 | 1 mesa3d-22.1.6 | 1 mimic-1.1.0 | 1 mpv-0.33.1 | 1 nanocom-1.0 | 1 netsniff-ng-0.6.8 | 1 olsr-0.9.8 | 1 open62541-v1.3.3 | 1 opensbi-0.9 | 1 pcsc-lite-1.9.8 | 1 python-pycryptodomex-3.15.0 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 sudo-1.9.11p2 | 1 trinity-1.9 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 unrar-6.1.7 | 1 v4l2loopback-0.12.7 | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 xenomai-3.0.10 | 1 xserver_xorg-server-21.1.4 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f4f416d13adea49b9a5fd38e1fcf98a1d0c5dfec | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/145e6ec60cced2902abda0a5cc08545fee4da3cd | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/36bfcd092d37bf4c2b9a32094df9b0e3183b39ed | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/1430dd87c785759e62ce102b214b70e20684bd31 | arc | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/2459caab7dd7d790f7013eb0ad25403bfe6c6f68 | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/04c2e80af39a306c7e9daa5826dbe14256515097 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/c5f28cea83b7f614255899a859c4dc9d223bc6f8 | ORPH arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8a2775ea1cd197ac2687c31560af19b5071e6052 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e32aa8c4e61c82b2af8f57eefd79b7d938aed8e3 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4dca9872cbd6d40717aa77801e7c1de8790db01e | arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3ad563da5beb7d53562ca042f6157c1b4b36675 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f995af5982d421635aa2a6991a6d04d498267f26 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/adbe13a38a7e597c6f820dca492246075f5e0622 | sparc | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/15022948993f52493678f373f9f5a8543ca912b2 | nios2 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/3057ef4d6b461ab95a49c860bb054e898a219dea | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/9b9b89c2f26ac12f505cfa4ec71d1e8c63e95db5 | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/59f43b7fac8e68e6888769be72788f00156a1d90 | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b5361b930815c9d6c8b7c1b03056dcde050cb7ca | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1bf55b598ecf14187a0348f3640a7f08fd24783c | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/31d72dfff9afc7db4d4709bc3f798b85b25bbb52 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9783777a72d6709bffdf1bd9f5a8bb0421fbeb6a | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/47a6ec18589e2a60b1362697cfc64d4fe2875dfa | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/61a7c7a1281fd7ec9eedcca65b5241f424f4428b | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/96d0c516415e16a3ad0c01dcf41050c528ef488c | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a4b2e962208c6c5f0bf67726ed303492c6807d75 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/356c813fa794ff68055360e9e00fe0d70fd0b9a4 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f80a3d7394867d68907903286902c9fc22c235be | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6052c6621de7509a61f79a8ac11c71993c988621 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b359231acd377acee995cb8903b135fba2b991d6 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/30e6da89801925621fc36dafa8b241925988497d | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6c428aa8f842abe5d8754f8a1b50d71f98980249 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/24e9b3e56e7f316e91cbd1444db8bf79dd7b480c | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/43b4614295bc29786565efaf3a607aeb4d64f646 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7a32a8016d468a554f921638be224ff6deae1e01 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c60720076dc081ae642a09e5091ed6ed6185f84a | s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/55d0b8aa9ae64654cc1ce0d1791ee4365a701498 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d34e3907aeedf11e48d07ad007c54398e971b27 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f21022c3fac3374581298bee4d74fe2ab357942d | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/922a3f360e5b53d25ddd5f7d478b6df7253e234b | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/22db780eff0e4bdeeb31913eea7637e58b519ecb | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fa35250157b30b992237dc00cd23c9c6389f6aac | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5a9657d738e3bd4d60693dfdbdeae5eed5abbbee | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0f9a4fe6ac0e3397cab23f28aaa9b5e6c03924dd | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/81a6cfc33e11e08639a5fd2d109e778221ffafd4 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a66129733bfd32181310981e3226bd663ec7386f | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/62f9e11656ef9915e89715a55fb300aadbb578b0 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9d422a435a6187686867a8a469d88e4d5e35ca61 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/29fbdfec9b5faf6549364985d75cb66dbcc1e7e5 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e73045557c30073c70da358cf2268d2b0b18bbfa | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/01c7231690011661e9d4f1ca7be93061fb5b515e | ORPH riscv32 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e71c03786361a94d377ca5ecf68bbd8e64809994 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/88dad0f4ee0afe589e53cc79d98c871ed942f886 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6caae728345e965867ecbf8a785b87b8f38cd3dd | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3bd41aae76b5becb185ef6fb32ab38c988e067b1 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/895cb37b2b685ba380fe695e088e8526615e6ea1 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/dead4d4c5735f5298077d63b1b9b961fdd7b36df | ORPH arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/90223169d187e221d6346a77ae45d910f23d97e8 | aarch64_be | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/261a852bae6fc2559bd592f9ef1ba906eec6406a | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/5a4c200ca80b7f98b3a66ce9e37f3572c7f0a51f | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/79de315a0c158206dfabaf8c644c6f577d3f34d3 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/992d5ab6beeceb906e4845795a94b061df98a8d7 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/6c02a5a1ffe17aa45834cacbf2d4426676fd6647 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/0649269321244881e86e1b9e5ca0457e7bc8b532 | arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/36e6ad28cfdb93cc722f9cf6cfd1b9e951b6c7b7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/06c2f46cb9647a61392db3f1992dafe367368a66 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/925dc1a34402be362944905194d88eaa806d5e2f | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ff5595db0ee366211733f357dc8551a99c40114 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1f6e5022b90771afeb86ac4780cab571d475a6c9 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/625e48964b1efa9615da73e5b3209eaad387d935 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f46984da82a74eb9b5448efa98c6559548f50d59 | ORPH sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7896d9bfd70c58fe405ce8f7af3a53e2e9b9da63 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bf6a39603150d14f804fc848c70023daa4f0381f | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/010b4f278cae625faa118a7d8ff744e129fe8bca | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e0446d34e90da0d806ca55b33b0b1a71c6ac4b7c | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ff4039d777ebd2c4771a52ffbf5958ffc96c41b7 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b7fa27065b84c580dd84a68ea092a794d175a38b | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8f97adcc3fec27a845515c1c3c21511151340a98 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6183830d0f7acef9d1797687def6a6759b703125 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/acb61d2f81e472f1efdf1253d6b2f2a7acfbc143 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/13e8489040bf8058569649d7c970e766a9a4e32a | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7d53d6fce55b92b7f2d0f2b48d269474bb18cf33 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/de4b3331effec0487737108abf3bcbda1042207a | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/127bbcabf6188b2d9b7e591dc16501c6728e9315 | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/cb1bdd3fa361d1163382694ae5fcffa4619fbf08 | ORPH sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/be8e9e1d680150c389c655497de0438bef3d4673 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7aeca0f4bf23dc17fc1b196b9b56a88040c53ed4 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/658ceb82ff78e38eede744ecfa388259174cd360 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f432eda14dae23c074a1976b389e5c56d207ba06 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b01493236b92462a6385c4280bf1940b5cc73ad | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f7b7fd63bf1bd7e42bdc6394459e5df4af8eb18e | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fc190f9c52417092b86244f28c1571953591130a | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/163d8c80a8271a035fe76972e0acb4222389b4ff | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/89754b06e28918ae86726af5028050e5e20e9ae3 | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/be3fed4884b20bb9398632f3fd31c9b16b7a4333 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b5c0c282a7cf7ea893ca35838ca6df12cae5f9c8 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4044b1aa94120035ef985bb9715ffdc82d949268 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/260096c8c6d9c2739e0223580e34c7ad3dcb89fe | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2c7fd3e20e5898fa5d99a36d461c7ca7402de729 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9dd05c5f0a46a6dcfeb2d30c9223751121a87bde | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/90ea95c5a74d030fd0d259ee011b93ed35ef6070 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d9a52d88d8d09fb45e5fbf045c07ee716894feef | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f539ea31ff794422f525c9fa9b9b1b3b55056224 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/9803fb398c80b6f65d00f278a0accfa9266f4397 | ORPH mips64el | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/e37972f5f6611fdfce1cc4640297237361c98d72 | ORPH mips | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/23e5f1f60aa41f0ff7489d20a80fd4e15a01d13c | ORPH powerpc64le | cryptopp-8.6.0 | NOK | http://autobuild.buildroot.net/results/fd67ae1297be8ceac03e28121626fda61ccbdc00 | sh4aeb | cryptopp-8.6.0 | NOK | http://autobuild.buildroot.net/results/7e429b39e7e1d37c9123213352a5f1c8e1e29bb8 | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a86cf24f38c2c77e551ce3c259ac0e09b26ced49 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/008482a781f782b4165a0eab3c123b0da549372e | xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/faf1311bf2c3c41c2e91515b551676b70ee88a66 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0938e85c3311533b649aecfb6c94df1a4677b99b | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/9711767d21511487f5c00a1bb3ae451f26d4b0c6 | ORPH m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/28b155a43382975ba388db8e80e56360c0595ffe | xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/25ff3c73915d372c90a106e4ee8633c49a36069c | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/13e06a96ba768cbd6b2e38b870cc9800b31f33df | arceb | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/352884d6af1c2569b990465f75c73fd38ffeaf01 | ORPH arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/3799a3a5dba8d0112b24434787f1152a4e2a2320 | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/7c5c667405cc302a1ca5b3dc7f1f7e0e696bc97a | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/d5a08fb40b41f0907b5d97795988d77c92df43b2 | x86_64 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/a4aaeefa91856b9b5060a071523b994c9134d2b1 | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d04f4f2eda0a3d71b70c5213a363eb867e449f6 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/f8c43c3340262c9bb22fa636183dc25c87823c11 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d0bf49ac6232f01d7e73570363d6b9e7e23b0f40 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/fd72bbd20b0471cb2d287d463efa6aa8e0fb2aa1 | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/65a4646cef30523f45b704ef25a85addb96d7bb6 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2a0f682ee37d4b59c898067857f8fccda32ac551 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3121637a5882167afedea7beb05406baff9f9de7 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b6541e3e8e0fa843f1de4a8e7b1c8f657b1db5b1 | ORPH powerpc | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/26be00f3414a8f923131657e267a137f12339edd | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/e697b160b8261ea8d892c08bd3f592c811a33c09 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/32f2a17a244e7a7a5ade6b05257093858d9d47e5 | mips64el | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/528f989ccc2fa70175993ee50f568baa14381222 | powerpc64le | expat-2.4.9 | NOK | http://autobuild.buildroot.net/results/3a373c6ed00590bdea2ec06acf38b393be76bb06 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6290855744d8f2e9c8e9cdc42f3dbf950c2c9c14 | mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/e81b0dd7f4d4ae2fa501a94b5585e30b4948e2f1 | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/69fad545ed8343f847f1df1547f086f5214f70ff | ORPH arc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/9302180c0777871f777fc2c3c09960f74f0e491e | ORPH mipsel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/0ff5185a98218c3c16ddb75ffbed2aa9980a1121 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/c62238f10a6e2fb1d7068c963898fb5f14569b25 | ORPH armeb | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/17781b5a2d8b551b1b4d09def8dd03d74bba5550 | mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/e554a9c5a21205fd15eb55dbe6979e1ccc7a380c | ORPH mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/d23773e811b5697ce92740313023153c3130ef06 | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/f109eae21aae888d6699d3bb6c5a180f500df9fb | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/6ea9cb5f4a3735c538de4c2480a54ee109d5a4ec | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/3d94b4b34335b76355f79706c91090b4fe701f99 | aarch64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/e5eaa48ace88af1605b1a460aed418f49e61d4ed | microblazeel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/e3dd3a941e39f730634be1b1e36c9f1fa0c149f8 | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/69468621c859336289f8be8d376d9d67bf686e86 | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/fa81560b72c119f70809459a9b4e927a89bba93e | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/6064181ef324a051cc75a3677392bb0b1708ab22 | arceb | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/30965a22882ff01c1a96d11952df329a9e66791a | aarch64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/e5303f962be0f380110a0bec7ab8e8e98d808e74 | microblaze | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/684c264701b4bd29f29749d3d14934ffdbdc16e6 | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/27cc153fb97be4d71d6f423706de58f5b9016e7e | i686 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/8837217bc75714669596cc2073782ea6c5aecb2a | arm | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/6f3b6a9fa83463a8b095146aacbd4975d29144d6 | ORPH arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a448580d6ccf6722c5f1860bfb76ab6a6d24de7f | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d290399849ee3258752747bdeb14ae63485476cc | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1b5a2fb467d6206069e88544eed9ab63a6b60b72 | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1139e91b5262e7c6bb52c0db0114b8c6f00b87f2 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ec917c20e59691e3743932c0ce85f1350ee5a223 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2b3205d7718f7b7043ae63885d71ba9d9274e7d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33cea25cdca33f5a9e601f6ae37e1c54d25bc93b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc7d0e9daf01980f99cda87e74b06aba53e5f684 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/849e0d4a3324f5bdc421f82eeb796e357029670e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6ff43f7de8382ecd68266e4d9eadac13871d25e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29ca1f280f1a6a37722039291bfb871bc8d126de | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd01db4555343e4478d47c1bcde3bbc4d61477e8 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cd95f941ce8d330414c12ff797949709aee2153 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae289a79d63e8c31b6b2b7b7804264b738e059db | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3434fa29eda37d4a588b20a7a875b1a0c04b1952 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83eb07ee998e5761782db1ecda70a1eb45418011 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7381ec0fd82fe7ec0f90b9ac8f3baad3cefb06cc | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/503beff0501f0979ef090b874e1ab78ca3b6ce40 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8a83e0cb169c866bc1dbdde5fb6a608b93c795f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9eaba9a2d270bcbafb00564e4934f6c3bdb1019a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ddb6c2d31806b484e14d4f8d0d118976a13eaf4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99221b02c015b31a5f5cb3185068b8985b3fb0c4 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70c8d5d65033b8e64f98d0c9676078987eac6d0a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b2d84c2ffc232db280113e344f31e639b3bc183 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ff26e6fdca2a3594b9ea765c47b05cf02c104e6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea48c92df6a491e100eab3c27399a18bd1a8f019 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77fe222871923ba1178ec9fa3b499336c085b6f2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f73d040b10e9939e0aec9942d61506cb00a1bcc7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07d4396a988e34b0006cb8806663098000d918ca | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d0301b9ea0205bd5eca7f371470256bbd13fc44 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f59ad252a30fe3ef21b14bf39cebdc1d86962d8 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1f7692551684554fad768fa42636c6eb088a72c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5704facab2919b76ce60b028fd62ea9846b87c72 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1acbc0e59c7449ac317ad3fcf2166a8c9fce51e7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fcc5933229767628a1325d3be4227901fe7d1db | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/450809380be168c9ad81b237290c094afceb9320 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb3beae7188ca2746d98a8628e6b11e833f6e8eb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2fb9df6f3fd64598bb0140ed4390f3f97c30c28 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd21258fd01382930d88f195ea6c09b85a4391c4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a741fdf49f4494d19763c6da8e24dc45531ae755 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/363948dc41e9c193860bd084c8301a3f35ef23a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4433bd0ed2a2161c71a65e0c5dbe33f080fa2d69 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa734ac04c104fef457cda1ab3c16281bad80208 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f27ed0639c40941097b0b44bcc8ee3208ad3a69f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/691f24d9a37a35cf815c1073299d9f38c1ac5069 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/001695610aa5cb1ee07e9b70554349ae82764c54 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96b4c2c0691387e39ed16766785354fcea4c3e46 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ef8fe92bac0dc91fe5e369ca02e9f76351273d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e26d14895459757001bb3a33451172d59ccfc7f1 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14f85dde1ffae1a774e7809fa47d2de975f9a852 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41a3a830635414680648edda2e123b2e561da7b5 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c10e112f9b0831634362e1f3ae556e69250a640 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1694160f82f12bdd7c892b0d1380ae879eedfac | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d55200c36dab13a550b6505289dfc7ffb74b989 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82f2041a99fb0a25297ed2c82742cb7e5d1cd77c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bef72771bb2928514646a122180ad7d19eba67bb | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7508cd4aebdbff8f840836b64846a77ac896f3c6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a10528f5578f80b75e8739c27ea16f5bf0e1de03 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/463e0f96ff780596bcf882940748dca19621711e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f62105eb5ad970891b7f19218bbba570d87a7e2b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61bc22449a6d03a8beb550e03587d474f3deb3fd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8f2b9c5892d0e7fd1ca8ab4f86f8c5a1711d2b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/744c55f73d6f65186ab43854da356979a847e4c0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/710f3e92d0afc907baa171d835b1a37616096631 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc470f76b33fa0bd1894c4817698319fc4eb41bf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bb28b8ed3be630834664ff06b43446bfe389680 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98f6791b4a8df7c7d45b003893a8b90d4f31213e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647063e7bcc478ab073fe5497162b55247570b25 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6883f74ba6c7868973f40e7d13b42cb4ebbd653b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/87cc07b81ecab1370205448ae51a848a9481580c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8772d9b31eaae97b2a402b23f91a3d941b4808f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4a31c57fdebadcc40bb9df5111edbecbbf77b89 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/659203ba2000069cfd58594276fd6b3ff3b629ce | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb7050d434b4f260c9f8b9daec69fdfd37739c3b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffd538cf5b3e8e08b8e4036514688237f400c7b4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd282c9fb96330c341211877875279b250f3d1a7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a14a3c8a51eb509ac02e9926397fdc7ebd2acf8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ae110092e80552de52189fe647d4a6252a8efee | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cb3c8636a41e1f6913e63c453ca48bed81369fe8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3a902b6f79becd70f08e870e140b6959549f08e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4742c63a904f4225195d524d660be81684ce089b | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e05d52006ddc934822baf4f2fe1c9366931e0996 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39cd6c0bc90f81cd67aa519d0327ec4b72826592 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7625733943436d48b486f382ae2415dd6f15a28e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/615d750043bfb831357c7ec69522e416365c40e1 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d02ad8666c47efdd6793c166f7b06f011d44f41 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b82c2291c99d76208cbb7d5410cf6a5cd05932c7 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2af984445bbe02a9239396a03e94f749b5a6bf3c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a883187b3c07c5c0f9d6c9277de7453483f9e33e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c9eff6a5e0bdd42575983a81250f997a887f22a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b222387746dc55810969d0eae948c86e53446b3a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aadfb899fe876451aa7acd3bc08e7708c8faae1 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57eee3c4a9a9f17b48637d43c1bb46d61d518c66 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4e138686886148b8a231f9cd2f6f28319e5d966 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d66c6175817557a3f540309a6e78285dd47695a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cda5694b2254ce2330bcc3115af8f1391c33dbb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/11007473ed07d006f3759640bad6f1cf55e07187 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76629659078a6352c4b7d1b14dcb4b35dd7e761c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7af9661274e208157c51d2edc7da394541d42fad | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a95ff5972f6fb4f0fb327af685620e8d0a5eb1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/428c1d9f47af158340dbc1f0749e5e1aa6417398 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df2a6adf0ea609648a40d276a36fbab430604dea | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60998785e2ea569ed2379222fac0f3d8653ea4b0 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4a9336b4e34cc90e7da63e139c352b77f98b0f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf659e5027e06c51efa7ba04e5386f53e5cc07c2 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/848d9d616f8b694748defe4d46eaefc6498718d5 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a2278f0d5bfdb6bbe5485e090377e6c9e7e223b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09b7d24cc11d2523cb16d4ef4e7883a8dcf913b4 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf5a5a91c39b8192d1f30e13d3ce0d2ef8f42337 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/680408a9c54c44a8e4ed57df656c6c6ebad8bcbe | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f5f371e107cefa50a4d93bdb1afb512b07bfb40 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/84aa596e2d2df82cc3620b0319eccd5a9994fcbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/483bd7222df9d351a7181d0a7798a09ed3ac3fd5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2370c57796a9207e52810365ba9a8430353a11a4 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9a81b529fd8b87caef54c8622e76da208bed643 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3ed8d715df3f1c5380876ae239ab7a70ee0a6f7 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b25024ba75111b2084b90cfb0995721e7d541826 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2224e7a9b8606131f9e9b32b9ee5ec5a88e910ad | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b6b2fb0f7af80533d79ff8171c8e240fe3be83c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5de2c24bb150f4e48776d11603efd6d04ff850aa | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9678ceb39618c1b6cc93c287c74d8b2bbcf4b08a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba9bf9bd0c2f7155ac59aa2ebff3c9939ac6642e | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/adc2fedfc991870126aa3ce13260721bd9772fe2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46184b1ef7b43d56ed6142b495060fde4cb24de8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc3654593c08b9e4c60710720c6c3d0c9bc5e07a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f270ed442986554a369eee3d644c65f6d92812a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9166a616b4e05a897683a9ab1f08e9cdacdaf055 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6555e3bd4d1c0a7fd7463e91bde3f3f5489574d1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e5d1be49659d46bbbfb2cc4b23e1c5481168e76 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80e08fae6293595bdc257601a33d7177799c9152 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc963e3df83e91847460b69e1a2f7c395a7f18d1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8838ee5f0293e82543466a42f39855c31a94c83a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8282977ae72fd6e444edb0396b9f1db5c5daaca4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/737a2c10335ee5d799796e99ed5779f85c4f331d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1fcf617cd014a98f4f759c96d7a71247dedab7f0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36a565e4d230213fb227a7b6a4d2e638dfdb3b82 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b4921097f04fe445724c2353e6b9bcff1723a0 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/561c0d4d36d5358d7ffdc51283b53aebd8911a24 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e17fd9683c45821d971ee23b774f89a9bd2674a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2bb99c91ed0b987ddb3a90c3e50d7213a0ce987 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfd4d86b7de2bec7b346e06c4d30a782a9f062cd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40c939bd4065bb7cec1c28cecda9f5c102583de7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b6b281d76a3d8577603bf0cc7a1b3f9d9afd19d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d1001ffd2568feaafe71c6680a182c2545cadc97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9027422785510fe0bc76c0837efee5eb5a682c29 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/222e8e33812053ddbf9b89361b85095679d2ca6d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85e65f66219dd1392350737a2fa7ba8df6b6a157 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fef7944f9579f2d0cf1d7c3a6bfdf0950ff933a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0eaee9e098fb37974f2da4b5a72f6064f4ffe051 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7b4c871007c73117c713dffbe509c2ba7b375a7 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/94d36855b6b1253c00a1293667d36da32ef6fed9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1101e9804baa973aeb701f9c40cce8a9fd4971c3 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/764fdd8e09ac3413604b02179b2b3ee692173aad | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c472024a04c63e36da74fcf52c0989971724fc05 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0889142fa7df106bbbf4bfc60fda81ae7c8bb85a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c99b4772997b0dc0b2c6ad7cee5c0ed06b75799 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec16173d93fecc2be526f3abf6b1d9dc5bf5eaa2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9cdec64a260686901df4f2be2c1f7a329e1d3407 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e43399dcae900ea2776a0ad726a01c93b20dbe18 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44c1d7e262f9b14a32e65e7f43b80c6a65426448 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13fdfee7e9cc11e4b58c060d9c10acdd0cf2737a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85ee627eb09055b58ab944a212215c7ccb7388ad | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd7c94eb37366fab77855e321456f03e30da5901 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eaf392ab4b33d99897ebfccf27bcc84ba7213eaf | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4288e7ba9b08552e6a7492d32e325aa03d32189f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95f2f9d19566c6f77d790fdcddce9cdadacbf3cc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5604ad863af974f5a73a24a0fb4df5f18f69a490 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320e559bff6f55eb56c20a5d6ca1eebc894d176e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a44b047a6f2d4596f566cc9a6bc9c794c50a13ec | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1805020d18166780601e0dcdad085aa1d38d148c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ac7816e06f74fce84e5dfee0cc5069d20499c61 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbee2d55b0d8d15bc354350b88fe4827e0ce8dac | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/826c804cf49263a9ed96d8f1fc3b48bd944e3d5e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b3880c20b1fc48c080b1b502fdf9329050274e78 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4b07c1bb9673d97b7b5d7b5a274e74ef7141ffef | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70844491cc9bd2743b5d9f33e18a6e8fde784868 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faa79fcc1557579ec052641f991e924dea0d92cc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2f8b36f351a51bbbca5afde14a5cef049b8247b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b4742fdc211816568be25dcbfc15e32648d194c7 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38c52b5540b35a99d7fdeff7dd3cb6c9569751ed | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ba51b48c72aeb22e91dfc470acf3878866799d4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/797519811278ab462c8658c9e8dbbc69ab35dbcb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2278839acbfab149ae482869a807916b1481a5c7 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e69e234d05b575bf8ff2efa91b69f65c2eecf4aa | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95fe195818397b9347bdfacbdfdadd30f6f5f19d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8312e4803bac04a736e63e633239b504cb9b7f2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db9b02ecfcc009ae5018cc768d13680ccb29997e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8c308ccbdbe3db2b53f22ff8c5323fd76258c7f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79f71ec31e02e8d7c6ef8475bd0dd8d2cd92a73e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66f422cfaafe69dedd980c523fa94e016cd13cd2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a179a4fcd638af506b96f6beb7dc8855681d435 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfed0b2156a178a21a3de5a9b12b17e14fb64d0c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2653fa4b0f1385c5c951dc5ddd52830abc7a2278 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db327045d60a9c8385649036a35da5c2a06bd9ef | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c8890ae39663dba16c15b03cb6fe33c8ddc06e4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d34a9ef56633cc7d7f569f25b9750f10e338349e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b70e0e5eb959b1f61594f108f1f5f26e9b2b1d1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e176dbd40c954513da822e35fed87d995385ee6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59b8e002fdab86af6b89d987301a11d0cb234f6b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c4730d9572eca11d000edd7f28bdef888e8ebbf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e3c4fe36d09bb822f3225dbb7ef5973fa77b6c0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78c311c85affdc6d4eadcb28b0199cec29844dc2 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a8d3cbc87394bfb2ee8a4999b366a9feba2f3a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eedb5603f2b727b8b1f8ce12d86df6775ffbbea6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6275cac149dd37fdc286fda294b1196d6438dc39 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c021e1d95b68731d2ea185a820963d40ea300755 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8afcdcf923ea1dd2f646017da19afb84dd9da21 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f867d576451d28a7641fcb48165ac37bcda12bcd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b763095c4b12ff63295f8475f180d5e8621e16e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/374e374b7c0aeb9fbea324255e19960aebc4d577 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e35d3df02de4b97b983d43a72a0a04bf49e450c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df09b0a166a77f5529d01e8da806cbbc4e394908 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b31cf19a8f9719e23fbfac3bd5613e96c73fc5b1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/826a40d75af95e9550198c4d9b080b64fdadcf8f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/21d26d31de91fdc1ad2b3d5e11420d403449dec8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a06462c58f98d58642378baeb44b55ce6bd4b59 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/617ff21bc9970c1a0d976b543a0e41285712980e | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30fca71a3fced4bc096b25b66eeb47622062cbf0 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/692b76c563df02a11502c0179bf8ccf7899dac24 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e68cb4dc4aefb1c41a665a0c89347ab921b77e13 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/218f0cdeeb8ba5a94f98373db3e995564196e300 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97a0524578278b2cb82dbfcd37bd569f65d91751 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e841df7c3fe15a419138140403264e32a29336c9 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d4e7d85c5ba0c9ccf3bab09f0fcce84c6256bd1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e9f3e445c0a70411d77d823b5119f82e864e918a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bbcf7b0f7324c7d0794b37983c1cdf9362e9019a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b989820e6c63e89305349eb446f79f7bcccda86e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6cadacd38dcac83a5a20e401136494d41582e081 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3efee6a90abdbaef9b4c5e624421bd8c1115fe8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/948175dc456c133f3f3b6342fde8a28249ae3355 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/544827d7bf1f476116037b03c672e8ea63838f0e | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9d750569d4e4f3084ffb475e389a11982acac17a | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/c3e44d1534aaef01bd7294d662121b8e658af7e6 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/951bb898894b9d25115e548c8db49661d803c2ea | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/0c05ea692a5ee969c8cf064a78158074c9945358 | powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6c3515f03de87a2daa0e63c52f93fac0b7dc982d | ORPH nios2 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/17be39d75eb23f084d1fa352e7a691642c19bf14 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/00ce82391fb9a99c0af5ecc829f340407fefffab | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/1f56b234f41d04e4a76e46fde7c28f03376d743b | m68k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/78d4d59d86a9e8288d751a6e491b983d4c8bb6ed | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/d63ae78a881b1b1ad0457f09525e11bc0abd8375 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/dd6bba1fe0294809a42204f2e4ef4917c64ef2e3 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b9055bf98222c04b00aee95e42c9edb1b25bfd67 | arceb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b2579c840218c575735a41ee8e646a9edc2efd08 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/992a363e66861443bc0d2298b3353996f3bd7d10 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7470e8613d338fb8677b58ea21a132fc79506ea7 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/48b18980d65bf2b465bf4a806b86549e043cbf92 | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/6fce8da5de4bd50cf6dd5493a3e294bc00f71379 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/99c3422d96919085ab33322b55a6b868a53edbfd | arceb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/22ed235d2095ba8bcec78a9959e479332d5258ca | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/19d5f8dc8ecb17d145ba8cf0450162ee49afb785 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/f9c28d90705b9c37dae5bba183058ae66114a054 | sh4 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/ddf6f0e862c8fb194733990187c38d2443f5670f | microblaze | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1bc77a6003128ff0d8e9602e6ae410c962e1b40e | ORPH mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1a625dc7f526743cf47fd2d21ceb648ed46dab25 | ORPH nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1792361072a6bebe36104ec33bb0800d21357773 | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/5e3213cae364b885a0cf292f10d6eaecd3016f1d | arc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d6e6816964f1e1c4af67805f9c6d0ebcd186dcf2 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b9ec30ca0c4cb53c82a366981c174c4ac66c1af6 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/dd849bb57a93eddcf2918415e362137ccc9591ab | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1e3c709345fcaf3ac042b58247e792714ebc97a1 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d3be15c230bd513ffd295c9d62d33f75673d981d | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3d2cf564cbe2a82207f54119d6efaeed2f844044 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b429b83a034ccb36bbc15460c9c790ed69598edd | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e7bcd099b3b22b5d8af528d6d7959f4bf73df3d2 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b81c2103cf3716a038acee1413f2be7b791e0cc7 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/63ea7e85de39393de93df2fa7af3fd15eff4d429 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0eb176fd19987719f9c4b541e3e9e2a0fc5f8094 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c4825d8f7f3648e740ea9720f70e7df98f1836d3 | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/becb5f326630cd38b777ae6168e090a534eb0b79 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c29c0852bb378a31691c765d9fb47b41782c1d9 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8bd70fc19709cedcab8fbaee53226bffdd242e58 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/679655c91ff98bcac5f5d95f0bb2a8a84e0062ab | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2ee1f1057c852e97c8bab157612bbd5ef2e2c5f8 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f915907e3e46e351116396a137416a6a6a312402 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f8d265c034b64211b9e42daffee5dc61873e2ba5 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3934065db4383493dda05388c9bffc24ea99f726 | aarch64_be | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/170377910ff0f2c0839222f47658477b0b8d09bd | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/dc62b4208dccadb0accb37cd5cb1eb7a07f6d8a7 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8ee2a4a0a7b85b74ca6abd5ba6b0a7d2d9befb0a | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/429bf0bfe138a2b82fc05438def3841160c7a57f | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/55503a7ecc586f8685dc7b70d9431bbf2649a5a4 | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f54be1dfa5e125a68d59e1404857f76cbf8f6c98 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cf04a8b5f8ffe05fc6b8c33c37723322d624353a | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7a1259f72a9ecd9c472fce38763f8da35fdb5d78 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/068bb0d70bf69c5d1ae4a125b6f28824f9244004 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/49d3f4d47987c0b30879ae6c7c89dce77dff385e | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3814f7aad7f88ba2b10d3d5c1a3f40e387adf21e | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/476b54da5651ff5e2707d8aec341991a206e1df5 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/65c3eee250dfe96a63399b80740b6029e336fb19 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/84d5c89b9273158d4a2d2af5a1de4b393c220484 | sh4a | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d4f11e2a3e2b6f33488ea7868fe3c3a44d2e0161 | arm | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/350633fd6dacac94626dcc02f3d02bc857bcc492 | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/fea8acb6b91b75fdbfdb3b8f89131f2a8e08e421 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/1f0dff590ab8a74afb01a5d47fe9af8ca2b5d3fa | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/99a3de307b5f2ad17a90f2c6190506d318022aa3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0c71bbefa6ae6dab0368a212832d9e87f90d7838 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b999320784a887cf5b6eeeec304f3dbfeb081350 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b28ba8cee8f34c01449b8aae928ba8f2a8dbdc32 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/163dce29c4c36845f653511fcc56e870157a0fdd | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/31643a70fceb56ccc1f61882fdb495cdc0bb4d64 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/974c261d9cbc89c0ca0efdf384b0d6f3fb645dad | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/5d1358dfc6104c879f795fadd4b0072f45d28b46 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/fa4074531d80f481c17a660ec7b5cea8c9fceaae | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8bb07dfc4c8eecced8d5a324df78c90a30be2ce3 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/aabbfa9b87fe2e1bc6973b9e9ab45690bf58e78e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7de7d03c85f9d8bba9ae8989be85077418027b33 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2fc1c0b36b9a85325ccc34f25818f1fc09604802 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8b2541f441cb0b8145d343baeb68a88dc973d0a1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1d92365f32236c87510f7b2229b09bb91a36faab | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c58ce9aa08c0d6e73b4e0e0ef76ca90587f513a3 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f34d0b2ba916bbecc403e071b05a65610df56d0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/169285fa486f738caa99c5410ad88e46976b43a6 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30f9f2c97af7602e02e1e02d949bd09ade5e6999 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/33d04009087a19c691874b822380d29ca00dafca | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/97e0690d39ff26e9e5f1dbb7b98ac26a6ac7e926 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4834321a1a76668b72fdec9e2365c2eab3445e94 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/79667071e8e70a7301711b2b719c52572efcef9c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/103792787193df757f8ef26e368e6daebce4bb08 | microblazeel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c5575a8d1737797e40d5ebe4abe9778fd2295a39 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/963c93c2b2722b1787db153789e12c40768ea5e4 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e15e1116cdd9b2984557a46719060edeee196437 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d547f4a56adea235996fbfa8e5e169fecd888dde | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/11362eab42b287b15ac58ca49d403a0f77143d37 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/afd19d3bca199897f3718608d41917fb505d2db6 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/56d31062437807212378c59d6ac2bb2e38834c07 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/895eff27f0cca5f0750ec5105b8a50012a856a67 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/85870fd9c229997ea0ea15cb4d55e0eaa84979e4 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f094fdb4d52092c1e8bf4cb86d4e7a872a7b04b4 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/63d51256849a77aa558a90086d6b6b758becbe3e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c4e208526ed8293e53924b25fa9568fddb91122d | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b3ac0e5144f842e2c87e36d082b81d217bab3f32 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1fa5369b7e00696f5f0fc2aa1e3bab4f2bd648cc | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b3e6c70ed23bd0b25cc8ade866486e5a15b2012b | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f5980b31d7ffe34bbb4b7958988e5fffeb1243ef | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7fff97a51c235190346e3dda1cfc8a1931dc7771 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4353470bc355cdebc41929d6cc59ee0f4531a4a7 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0ae1269d5898b935822d9e0e472bb83df87ce873 | arceb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/8571af18dbd20ab11078f6c011f62a0f3fbbecab | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a70916f2ed1c3b17585020e95c7a756e8e794306 | powerpc | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6c3fd65e3f6203124ab65e74dfbcb981ac2eb46b | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6b8f35408c0fad9340ed977d844dabcceed3fe6e | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68c4b650abafe0745cb11033d2fcb683b7f1b90e | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3485ea66b8593d9288a655bea3216999ff79412b | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5f62cc39ac2229d9483c301a2551eb1ea78b6a8a | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ca89f2a60ab530d7c1d7b1f4f5b5caf82657b353 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/73a13a6d05b5062aaa499aaaec1993bdd1b01c89 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8091f11699a15e1a887faf45213bc33d1980bbe5 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1d00e2325bec9921b2c56bc6c802b9cff68954a9 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/115170a6e2372ae855626ee92c70cbefc7fce560 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f0dc9d0ea0db1a53c3033ea14be01f4acc7dc0e6 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1b19f4c2fa1e638314c43b9ec7fa109afab08263 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/b514cc7a35fd123d9ae0ec19540a9815293239e9 | ORPH i686 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/9d5dcf294bbb2fd77697abcafeaf703d8150e068 | ORPH x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/a81f0307166ee059806759a7a5d2160474ac1999 | ORPH powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a74254b833031d04268bb721a094237da002c493 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ac38635042367dfa0151ce6eb95bafc99a20fae9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fabea6656d939062f20e91f65db5a23a5e5e93d3 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/58c2d8c87c7af26660002db0d5a4049c57f9adf2 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/033bc1a31d61c811c1ce874c8e8b595e354a28c4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ab13d6d321e0d8a6defc1db66d6b1484aa6a0b64 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b0473b420085cb78930acf9842d7501775e119f3 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/548950cf220c872ae909239173837fc6f1e5d0b6 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/47843698a4fc274ce85bed881496363371d68c31 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/56a3aa30a7dec82aa76fbdb5e00eaec3d6c29db2 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cc3257984dd2e78b20bc4c667be8974d28f1b20 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/46dc621574b4f587a9f084511ab7010250e16081 | xtensa | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/f744b2c23b7199545c9ac40d3ba9b44fe074d36e | aarch64_be | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/aa925e9f747e0b750ede385fab21cb2fc67dd35e | xtensa | lcms2-2.13.1 | NOK | http://autobuild.buildroot.net/results/57a6c80642613e8a87a49340b96124ae3f803ab5 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5088a06433feab53f6b176d4eb8a160f93cb0cb4 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4ef2065ac93b8aab6228553020bbef8f9e5b73bd | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b75b9781364800bb8d4f5176d6bf26c22e15b769 | arc | libblockdev-2.26 | NOK | http://autobuild.buildroot.net/results/35d9f147c2674c1997b8b7c3897406a432e9dbac | ORPH or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4e8a6f7d894583d99fcd77db8f315355052a779c | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/c3113bbb00ab42736fae4b4d2301e23d3e1730c0 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/7156fc7ccf781583d44998f5bca42f25ba146cba | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/4509adef9b8149eed8835c834ee3a522a2ad40b0 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/9a7b45941af6b09b77b5b22f3ec38c2e6fb0aca1 | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/ecbea4a0f053625c5c6a911b6d443e735cd32cb6 | arceb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/1381b1d04ddbd9e6af839bd25b1df87765442510 | or1k | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/4906827e9a1547c1b87ef60c5d9843b63488a2c7 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/02fccd2e4ceddb68873867d87c4076517cc44f5d | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/72d0a31f1047d19c39e0abfff30c4a5313c90150 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5569d69f4afeaa565b6e0010d3b565f80aff58bb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/216d79fcf3140bf468e87319ef41988b0b48c7cf | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cf8a88c0abfc048b3832f90231e05520c7a3e012 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0316b22587de8e3c0fc95b0259c56c53bd43c529 | mips | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/62fdc524e310a039c7f07fd518207a1ab79ee6a2 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2867263c7d1089045f06366f12ec36d067a88b91 | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/6670eaa3d78afa0ee130dad0096ad7089a9bef22 | microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/6a91c474dd9f14b7f2e8fc0324687a0af5a1e5e4 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d32e2b39f3d1d50b9ee0a14f9ec21e3eb518b083 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3ebee4e9bc5236479efd30f2933acf074f095e3d | mips64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/254c5d927b5978a432c4dbb6377dbb79e8eaa27f | nios2 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/63aa843844bb798934582e041e37dac411f40cc3 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/2607800b5afb950e319a0bacf3f013540e751e6f | sparc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/dafd433ae91d709dfebbee08cb73a2cae8e10f61 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d26145ce9418aecbe6795859d3d62dea77893497 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/7b8db14f997d7e079472258235098ad39aab0deb | armeb | libunwind-1.6.2 | NOK | http://autobuild.buildroot.net/results/7463c551f6b0a4569fe9583a19f19cc78646b423 | ORPH aarch64 | libusb-1.0.26 | NOK | http://autobuild.buildroot.net/results/7da1c277331ce6713e49e1f823c5436d09dfcc43 | powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/e84806615e2034d66c27884dd1cc4a129565faba | ORPH riscv32 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/f2b315a0a8cb0024ec36ca4cf807740e1b72cdd1 | ORPH arm | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a3fd29582a7dba804bb87616439a376ca02ffcd2 | ORPH microblaze | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3cb2f96086ea52721b4dea49bca937eaf46d1888 | ORPH mips64el | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/5ade8ce9fbd24e03657ca86c6e8e314366240e3b | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bfe6a9cc14fc306ca3755521a45904f548aa01a0 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/9d9002be2939f5c9eea0827667c10bf758cbceb6 | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e505e73249163c58ce51fad04acbc5720649bc95 | ORPH s390x | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e06763109d78afe53f8dbf601f7259de4474e94a | ORPH microblazeel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/54817f8698a1c414dd9fd3a1925cc4c86c63c180 | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/6ae052ad5c39c5dea312d71844e065bc217726b6 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/fc3c14578067c558c899aa2a89122d4697c3abff | ORPH mips64el | linux-6.0 | NOK | http://autobuild.buildroot.net/results/ff117758d41b5d6c71afe5feb8c26610f838b1ef | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/0b5a520db98d231fd6512224ad5e094e750c9440 | ORPH arc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/99c233d13838c8319116837f180494b815684563 | ORPH m68k | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cd7b16b7e2a66ec2fda581ac215c9d778e3aaeb | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bc057b8b4591eb2d9f6b6c55c49edcab7a3facad | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7de742aa9716c6c12f49df47885cb8cc30556599 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e2cb14643e60f7049af520216167f1cdd74b3887 | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c89ff6d4e12ae067b2ef9a6413cb1e68b1f72483 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/ffa007ac704c4eb1bbbee603dd484550c7be5be3 | ORPH microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/36d90ef4f78d0d2e54882238f062bf7dc208130f | arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/2da71961d10d7de8d7ae0cb4c7aec0d1dd804792 | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/a030b169ac419186353eff2ee342c0a4b56dff8a | ORPH sparc64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/dd2e5033c3eb466927ca5646fda548c7edc70951 | i686 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/85a465434a7d26e520fbffaf140c2ce83bdc145f | armeb | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/b28fabc701516a6623e80950fdbb8a0036d4877b | armeb | luaossl-20220711-0 | NOK | http://autobuild.buildroot.net/results/63c71b8013701ada706e85fbfc7992eac206871c | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/18521c51cfd8bcec6f2991fba28f88b8e74fb662 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/c86492d5ae8a7e37620b113b007864153a1972ab | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/08d0009332a3de44821db523d27cd376b2a84572 | microblazeel | lz4-1.9.3 | NOK | http://autobuild.buildroot.net/results/588c740a2343631fbbeb7ecdf9177816cece3d33 | ORPH x86_64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/ad03a76cfce107306822514d4b3e6fe7e378db3f | powerpc64le | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/51610bf7d656e110d438b770c09ee65698c45586 | ORPH s390x | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/c010faa04a32e009973c62a0ed793694f4a4d29f | ORPH arm | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/e072d325555934860d154e1ad07b28ad4b9f78ce | sparc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/ee3b6f08cb431d708dd09084528721cae3e84ae7 | sh4 | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/c64ea869dd9513ea9694c480bd21e9bcc1c94790 | mipsel | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/a61e7a958330985f4d76b119d0cb4014cdfb1e47 | i686 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/93832e815be755c4640b871455817b9ba7693c5f | mips64el | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/36f37b7655099cec379004b30b0e09bce5cc0ed1 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/ae676eed49e2defd45577aeff3af2a88c0ac00a3 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/45882b967fb664f27e71b0c604a2c7ce6d0be853 | m68k | mpv-0.33.1 | NOK | http://autobuild.buildroot.net/results/fc45b97769b68ed46b29932586008b9ff6703983 | microblazeel | musepack-r475 | NOK | http://autobuild.buildroot.net/results/09bddab8959b787e8a6832bbddf882ea66e7c55f | ORPH sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/dea3cfd1237d2e27c623d0a1f3049e734cc85a3c | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5a666d0a3159c7806e237f2cd47fe743a832c01b | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/be40cb1003e90c9dfd0d2e20880c12ef4a5480d4 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/acec234955d06ed6492ef6aeb50a94f69431019e | or1k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/a569b1cbf955ea59fc3694a07f3fff5ff0f1f82d | aarch64 | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/1a993980d35d542e216484792a700c7e70e80a1b | riscv64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/e9c1372b6cbfbead15784ba4c4ea57c84a4b1ee4 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/bc9b745fe4cfdf7a802dce2001d5e6b0746c8b0e | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/2a3f2a17b8ef244c4f22beb2130102d2486f7a40 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/85ad4df1dfc89df2e6a14d9c972b54d0706e63e8 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/a55c891fea888b11be00000b4aca4320579337c3 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/14200f15d35ebbba1f3bd92465a360a16603394a | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1e08bc66b9dc04538f739e7c268124250b210164 | ORPH x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/18880b7608f521d0c2f4976ec40cf8e0fe36a2f0 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4074429b0bb76e981dd24c6f761a5b6d3270fa0d | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/62882f72d5eb0c4bc9dc72a72f6e40fd1749ab32 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/98016e2d037fad0c12ed30a5408553aa11c6ecf3 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/733a5d63ccec65f134cc411f017bff8cd24b78f6 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/d4496e69deb01fd89d927525f9ba100be520bed8 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/fa795afadc91e31aff04595f6c42542e36c5878a | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5ea0155f055639ab334e0ad3733091e43e79f7ba | ORPH mipsel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/cb5ff1ce454c9e64f0648c5ae4bfa8e1bdd9822f | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c1d904dc8b82f20ebbc6bbedf8bd7089b703983a | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/b38441875e524e56fa5b0de0871d0f0d77eb8cfd | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/0e8d6cd228650a9ce31f505c55a21b72fb45b53b | ORPH powerpc64le | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/9eb7db8f566600737029da29efd81c8b1c139539 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/0a806139e0d9d9e99e1d2e8fd4024dc1dced1eb6 | ORPH riscv32 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/7b86aedbd2cbfe3fca800db52d26a396ea4ea205 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/aa47d0cb1eaeef66bece6a969c5abce44a6c7197 | ORPH mips64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/0ea38f80961ca0380eb8257cf395050b02bca707 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4125ee91030495c808a251cd0dd2734956e69055 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/01e8ee531ce7e1c904abefc39f0b32d12c674a87 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/860f9e74ae35abec9bdf1047174376c69e303f5a | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/774020388252834e97c62171f7bc2de062ad022c | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/401061f9b9a0ae792d9c3e053b9f8303f82ae343 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c413142bd1e7c15c47ee82ebf1f5a67835c5e174 | arm | python-pycryptodomex-3.15.0 | NOK | http://autobuild.buildroot.net/results/3c5b09967f6fd2e46370f32ed96684f65448315e | sh4eb | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/5339b043db8d9c58e95df8445e66246ddb7a2789 | microblaze | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5 | microblaze | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/74c561c2c7acf1780ce408de6d3c7575672b95b7 | ORPH riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/7f6377934022e9a9935a783584b121b7462a60cc | ORPH arceb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d537a74269132868034beef59995ee5fe90a315c | ORPH arm | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/750f279dec4b00705e6ffe403b846fb91824f440 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/91d4cde241cc6ba20a47f32b01dbcaa682006753 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/546b0560cd759b137d6a9228cc95acb7756efd29 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8d60e592184c73307ddb26793f05638d242760b7 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f29807f5757cea192914ff1a5e9d9defa61b4ddd | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6d75b3249e7df1ac6b891a6aa0126973f52869dd | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/15644ebb1a0007ff963e0de02fb87a4d5a26c5b0 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022e51a0054993f79b8d588f5ae4a70d6e84aca8 | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6e1cb720e1083459354a02d7800f5ad4778d838a | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0c256070bd92e43f8c97728d18c0f2d4c855a825 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6028caaa0ecc5a67dd6bd1d6754d9d205976d33a | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8c3683e2232afdfb95e9fed97b8463b8fd003eee | ORPH arc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/f5af842495d6001e82265f8d51b818d7e8a889d8 | ORPH armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cd7386ad261a751df1f7b7bf75b2442e9576f817 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/515b2540cde05e9cb8ab168983ac11a90d700921 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/70877b55aacbdb0a09db2a56b0965179a2315157 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/af69d430c1a696d7f954441c384479e2ebc22add | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/34619f5bbab6edbaf7099f2bdc6fa68b1f800372 | ORPH sh4eb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/16848baf9b2f41aa684c663ea4332036db6c8c52 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c6b2a57af44a9eb0a4d51794b9bcf7af785b294f | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/72911e1f77ce154aa345d467520d0b33fa020628 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7c0edbb0eed1d95d11667a51c3b8e35d982e546c | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e02c7ff7fd40c841f69dfa1b279b882cfff8a365 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9d34f45817f997ddb9aeec2425fe11e8f3380c46 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/88bdffc6a4adf8d6ca93d7f2d71aec0c179512f7 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a4d09910e0d21dd6a5f0cebe9e53968ecc78023e | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/2a5a4f843e2bd72ace6288f909e95a2996d1446a | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5ba1a68cb3594fe8069166024c9d3891672a02f2 | ORPH x86_64 | trinity-1.9 | NOK | http://autobuild.buildroot.net/results/04d0f5b9fc40b4850a7b438152caa90bfb62e661 | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/306c18ded68950b97656283f4fcb5ace633e2a9c | powerpc | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/52270c52561dfc343e3dd428cc1228de9292c0b3 | mips64el | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/45de34e241694439ff66328ec1b2b98f6ad4e1c3 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/e80f3ee1540f4291db7fcd21d1d737a551bcc91b | arceb | unknown | NOK | http://autobuild.buildroot.net/results/70bb84515cbabfb85834111db75fceea8e592ea8 | sh4aeb | unknown | NOK | http://autobuild.buildroot.net/results/740915478f5141aed766417dcb8219a9f95d48de | sparc | unrar-6.1.7 | NOK | http://autobuild.buildroot.net/results/9da55491d984eeebe9ecc8ad117b03afd3058d80 | ORPH sparc | v4l2loopback-0.12.7 | NOK | http://autobuild.buildroot.net/results/c8787e4eb75b818f40c7ca756ece0367e2aea101 | powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/7f288236588bec42e2fac5e60a02e844eadbbd89 | ORPH riscv64 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/ee4e06291eb3161371be363f18f7a7593fd6ca40 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/5aa7f58c681bfdd9d774f759b4f166a52fe74ea5 | mips64el | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/f482d03db20d746d3563ccc4ec7cd99d67b8d4ce | powerpc64le | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/e58cb3eee21a7e3b1380022627bea3d6062a77e5 | powerpc64le | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/e541354db0f6cc626aee09658e6b12a1066bc4a0 | aarch64_be | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/1a994992d202cf698e52d94e148dc340e994b8a0 | powerpc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/4c2a368e8d706031866b5d1d1417b482500b9804 | microblazeel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/40160215d1c57dffb2f3b91c24f0f0969800dfcf | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/8fb753f7491b9c8a03ae76cfa493131bf0577ae8 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/77bf9aeb25d8d6f29dd4997119474ab02aee75db | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/8e76830007922dfad1b6bee3ead14235f25211b1 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/6df1760b70faa9b163d458866efb876771031c20 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 3 rabbitmq-server-3.8.2 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0881ba59289dabb3bb9df7c7e4e6da65b6485e64 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/53e8a60f3f5bcba2d49e94dfbba1e0c23bc6891b | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/471bbaff87b31a40e0324038caf76a11822dcaa7 | aarch64 | rabbitmq-server-3.8.2 | NOK | http://autobuild.buildroot.net/results/31354e0cb9891144f882fa2cd5df10ed20e924ab | Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 3 igd2-for-linux-2.1 | 2 dash-0.5.11.5 | 1 erofs-utils-1.4 | 1 libgcrypt-1.10.1 | 1 libmad-0.15.1b | 1 libvorbis-1.3.7 | 1 lpc32xxcdl-2.11 | 1 perl-5.34.1 | 1 protobuf-3.20.1 | 1 tinifier-3.4.0 | 1 unknown | 1 xenomai | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e7af5d38c4343ba403c3982e7b489a18273deb5 | ORPH or1k | erofs-utils-1.4 | NOK | http://autobuild.buildroot.net/results/384ea9c1450656e8a029592f814f6e02d3e2cf5b | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/eccc1c0f3ccc19fb806d2ea8f41f58a3c6422f19 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/575bdf2f48db9ce25aa3e6bca07aebf34830b8d8 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2f7ca6bf32f204a0a37a9b6068d26c5a5286b9de | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/786ee85f0b439473d6bd3880e00e5d96a7998f23 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6ddd2e94cc2cde1af29e5f40f6df583e1efce074 | i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/2c1bdb615306c66b2cde5a1eae71143fc98774cc | ORPH armeb | libmad-0.15.1b | NOK | http://autobuild.buildroot.net/results/1dd7d897b6e802dbfc2f37232a9f8f4558b0f6aa | ORPH powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/b287e339821589ec41cc960f064c05af9097c20b | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/4821b8600c6be7bebf5e4d5f413e7a013f04c4e5 | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4daa082141c94b6a6e4ff3abd132f58bc8de9459 | nios2 | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/7158b73e168c1a7d8eb0a12be78f2b421904f9f8 | powerpc64le | tinifier-3.4.0 | NOK | http://autobuild.buildroot.net/results/f60a0b562dde9320efe97e75ba0226a55f24fb73 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/73f4619ec0575eda767f68bd18949dd328357e59 | sparc64 | xenomai | NOK | http://autobuild.buildroot.net/results/9b5faab1d091a9a991741cc272b131062ce126ab | Classification of failures by reason for 2022.08.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 gerbera-1.10.0 | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 linux-5.10.109-cip5-rt4 | 1 linux-5.17.15 | 1 toolchain-external-codescap... | 1 unknown | 1 wavemon-0.9.4 | 1 wolfssl-5.5.0 | 1 xvisor-0.3.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/546987f4970b8fd58d22ac97c765a3793a4bed6e | s390x | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cfa418652a857c4f541c9cbdbc14b6a49667f56c | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1effbcfbcf7b1b089614dd8b09e50b475763f80a | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/80c474debe0b3dc652c68e82b94ca5a05d7671ab | ORPH arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7fab0d4f9dabba28828b052127642ec230601d9c | mips | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/2ad23a2939fb8225b48e36d789bdaf8f99854e8d | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/d672ea875fd1054c0e2daaa8015d033012d252d4 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c1c1e6ef6693e1381e01e28df678079f570ce519 | ORPH aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/d68d5a9c78a01ba37559a8999f11f8a53f092225 | aarch64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/8720b1ea254ea92b846b4bf0452bc1bcc6dd8d43 | ORPH riscv32 | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/ee6ad1a96fecbd30cea1870635c7e483fc24fc1c | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/cf9d2dd70c42fe32a22345a0485b3e37dd62558e | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r8 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.0 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.31 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 5.19.1 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | checksec | DISTRO | https://release-monitoring.org/project/17677 | 2.5.0 | 2.6.0 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.2 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.5.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.22 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.0 | ell | DISTRO | https://release-monitoring.org/project/17781 | 0.49 | 0.53 | ORPH empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.19 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.28 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.5 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.15 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.5.8 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.33 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.13 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.33 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fluidsynth | DISTRO | https://release-monitoring.org/project/10437 | 2.2.9 | 2.3.0 | fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeipmi | DISTRO | https://release-monitoring.org/project/00848 | 1.6.9 | 1.6.10 | freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 3.92.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gesftpserver | DISTRO | https://release-monitoring.org/project/59393 | 1 | 2 | ORPH gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.0 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gmrender-resurrect | DISTRO | https://release-monitoring.org/project/21445 | 0.0.9 | 0.1 | gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gnutls | DISTRO | https://release-monitoring.org/project/01221 | 3.7.7 | 3.7.8 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.0.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.3 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.3 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.3 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.3 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.3 | 1.21.1 | ORPH gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.3 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.3 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.3 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hdparm | DISTRO | https://release-monitoring.org/project/01304 | 9.63 | 9.65 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-50 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | isl | DISTRO | https://release-monitoring.org/project/13286 | 0.24 | 0.25 | ORPH iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | iwd | DISTRO | https://release-monitoring.org/project/18380 | 1.25 | 1.30 | ORPH jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.24.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdnet | DISTRO | https://release-monitoring.org/project/06308 | 1.14 | 1.16.1 | ORPH libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.15 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmaxminddb | DISTRO | https://release-monitoring.org/project/07470 | 1.6.0 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.11 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.0 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libva | DISTRO | https://release-monitoring.org/project/01752 | 2.15.0 | 2.16.0 | libva-utils | DISTRO | https://release-monitoring.org/project/16334 | 2.15.0 | 2.16.0 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20220913 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lrzip | DISTRO | https://release-monitoring.org/project/01842 | 0.641 | 0.651 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | micropython | DISTRO | https://release-monitoring.org/project/10539 | 1.19 | 1.19.1 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.185 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.10.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 515.76 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+18 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openssh | DISTRO | https://release-monitoring.org/project/02565 | 9.0p1 | 9.1p1 | ORPH openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.30 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004003 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.78 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.39 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.27 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.13 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.0.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.18.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.89 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.89 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.0a2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.28 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.14.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 2.8.7 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.2.2 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 2.5.3 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 24.0.1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.2 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.10 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.4.1 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 1.4.41 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.0 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.2 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2 | DISTRO | https://release-monitoring.org/project/04779 | 2.24.0 | 2.24.1 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | syslog-ng | DISTRO | https://release-monitoring.org/project/04930 | 3.37.1 | 3.38.1 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.0 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0453 | 9.0.0701 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.40 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.230 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.18 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 373 | ORPH xz | DISTRO | https://release-monitoring.org/project/05277 | 5.2.5 | 5.2.7 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.05.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From giulio.benetti at benettiengineering.com Mon Oct 10 18:11:48 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 10 Oct 2022 20:11:48 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.0 Message-ID: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..3582de2f30 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 a05e19e3f52da24ed071522f0fddf872157d7d25e869cfd156cd6f1e81c42152 harfbuzz-5.3.0.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..8ef41d3952 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.0 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 10 18:13:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 10 Oct 2022 20:13:25 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.2.0 In-Reply-To: <20220918000859.837023-1-giulio.benetti@benettiengineering.com> References: <20220918000859.837023-1-giulio.benetti@benettiengineering.com> Message-ID: <120fd0f6-2ea1-d80a-1126-d1498ef9d35d@benettiengineering.com> Hi All, please drop this patch in favor of this: https://patchwork.ozlabs.org/project/buildroot/patch/20221010181148.18858-1-giulio.benetti at benettiengineering.com/ that bumps to version 5.3.0 that's been released in the meanwhile. Best regards -- Giulio Benetti Benetti Engineering sas On 18/09/22 02:08, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash > index 9ec5c63f55..0d55c15f79 100644 > --- a/package/harfbuzz/harfbuzz.hash > +++ b/package/harfbuzz/harfbuzz.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz > +sha256 735a94917b47936575acb4d4fa7e7986522f8a89527e4635721474dee2bc942c harfbuzz-5.2.0.tar.xz > sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING > diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk > index 75d55106ea..15a58c4bf4 100644 > --- a/package/harfbuzz/harfbuzz.mk > +++ b/package/harfbuzz/harfbuzz.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -HARFBUZZ_VERSION = 5.1.0 > +HARFBUZZ_VERSION = 5.2.0 > HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) > HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz > HARFBUZZ_LICENSE = MIT, ISC (ucdn library) From thomas.petazzoni at bootlin.com Tue Oct 11 05:45:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 11 Oct 2022 05:45:43 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-10 Message-ID: <20221011054550.0723E409E7@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-10 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 1 | 0 | 7 | 2022.08.x | 14 | 13 | 0 | 27 | master | 109 | 819 | 8 | 936 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 371 host-gcc-initial-11.3.0 | 47 berkeleydb-5.3.28 | 24 ca-certificates-20211016 | 23 host-f2fs-tools-1.15.0 | 21 slang-2.3.2 | 20 bearssl-0.6 | 18 host-binutils-2.38 | 11 host-sentry-cli-1.59.0 | 11 igd2-for-linux-2.1 | 11 coremark-pro-1.1.2743 | 10 host-gcc-final-11.3.0 | 10 libnss-3.83 | 9 crun-1.5 | 8 fbset-2.1 | 8 brltty | 7 gpm-1.20.7 | 7 host-gcc-initial-10.4.0 | 7 btrfs-progs-5.16.2 | 6 dieharder-3.31.1 | 6 host-binutils-2.37 | 6 systemd-250.4 | 6 autofs-5.1.8 | 5 frotz-2.54 | 5 host-gcc-initial-12.2.0 | 5 host-riscv-isa-sim-1.1.0 | 5 libarchive-3.6.1 | 5 libglib2-2.72.3 | 5 efivar-38 | 4 gerbera-1.10.0 | 4 host-binutils-2.39 | 4 host-go-1.19.1 | 4 linux-6.0 | 4 ocf-linux-20171122 | 4 unknown | 4 apcupsd-3.14.14 | 3 dahdi-linux-5c840cf43838e06... | 3 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 host-pahole-73383b3a39afe86... | 3 host-rust-1.64.0 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musl-1.2.3 | 3 sdl-1.2.15 | 3 gobject-introspection-1.72.0 | 2 hans-1.0 | 2 host-berkeleydb-5.3.28 | 2 host-delve-1.8.0 | 2 host-vde2-2.3.2 | 2 jhead-3.06.0.1 | 2 libcap-ng-0.8.3 | 2 libee-0.4.1 | 2 lxc-4.0.12 | 2 memcached-1.6.16 | 2 musepack-r475 | 2 netsurf-3.10 | 2 open62541-v1.3.3 | 2 openpgm-5-3-128 | 2 perl-5.34.1 | 2 toolchain-external-codescap... | 2 tstools-08f6be304040e7b8476... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.5 | 1 asterisk-16.25.2 | 1 bluez5_utils-5.65 | 1 bullet-3.21 | 1 coremark-1.01 | 1 cryptodev-linux-1.12 | 1 dash-0.5.11.5 | 1 dtbocfg-0.0.9 | 1 f2fs-tools-1.15.0 | 1 flite-2.2 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gdb-11.2 | 1 gensio-2.5.5 | 1 gmrender-resurrect-0.0.9 | 1 gobject-introspection | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 kexec-2.0.25 | 1 lcdproc-0.5.9 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libmdbx-0.11.11 | 1 libostree-2022.6 | 1 libuci-4b3db1179747b6a67790... | 1 linux-5.10.145-cip17-rt7 | 1 mesa3d-22.1.6 | 1 nanocom-1.0 | 1 netsniff-ng-0.6.8 | 1 ntp-4.2.8p15 | 1 olsr-0.9.8 | 1 openssh-9.0p1 | 1 openvmtools-11.3.5-18557794 | 1 perl-net-ssleay-1.85 | 1 python3-3.10.7 | 1 qt5base-2ffb7ad8a1079a0444b... | 1 rauc-1.8 | 1 s6-portable-utils-2.2.3.2 | 1 sconeserver-8d1935919a20133... | 1 scrypt-1.3.1 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 skalibs-2.10.0.3 | 1 sslh-1.22c | 1 stress-ng-0.13.05 | 1 sysvinit-2.99 | 1 tealdeer-1.5.0 | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 valgrind-3.19.0 | 1 vde2-2.3.2 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/570c68fc8406c34277b9f5d387d98fc7fd35e5c4 | powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/381b632efdeb7158edddbf0e1ff436ddae452dff | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/e7353a7688bce016b5c1faec2e28ceea9f4fe77e | ORPH arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/f214a4b71c44bec8e772bc8863fde2d7d51658eb | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/3ff3ed4dcbcf2d5be8e984730610c03056d70208 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/8087848f97cbfff8f29dfbf7b8f32a73e32b1cec | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/263ebbbb9d165fc64527989c2f8876150087e218 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/00d353cb8a1af5d78e3e11d6fd051c95a1688d1d | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/51944714e39f42b053a014d230744ab75594ed88 | ORPH x86_64 | asterisk-16.25.2 | NOK | http://autobuild.buildroot.net/results/4c2dbfef776d17a13216e6a7bfdea64fa65afc09 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e1f4a35c3c020dc0c7546fda599ba1677805d589 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cc8c02d55a34b652a8a705500ec8c8098ccbb2c2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3f8f802803452c7003af5aa07697f973107ead50 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/632801349c8105fe5cf915d7a40b0c98eeed1b04 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/77210a433cca40fdcc52133602d6147263e47dc3 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3ceb7feda0013376d255e104656a80ec3372bbc0 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/064a814466a3ae23b07f99972110425dbbc20b3f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/10343f0b0ad22478d0f8bd5215409607eb3d8f25 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c3ecde2e89269a621bf5be1579d5a460c0f5174e | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a462cddf584968e9f85f9f28dbef206a2cb425a5 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1789e2eaa07b89eb9a182c7ddbe0cf9ec009dd7f | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5d78e32a52d5faf32933d47f3d905730d7a43d88 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f7652244ea5dfd523e481c699f6d9ce14d95985 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/caf348adcbb545ac1d479311f205340017ae83b5 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f715d1a284ccc641c7a4d7f61a619a700f10c6fc | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8d874c911f485d882c40930e4beb427f5e538cd0 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/739d1566e1e5033b852c6c776772c782e4d841b0 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/397756e22de2a53a878ca785893e44f9e3492c03 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ba32a356977c776bc0dc0cc029ed5e56aac912f | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9c5e775bccdf7ec38badc34b09660d47d0ef7ca6 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/27fdfa322dd639216421c807ac0ef8fe06ec65e8 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2c1e7f458d71557912719e5a78d667d42120ac27 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6142d05563eea08dee880e6ee1385324955d4e4e | sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e3c4b17a0d9d8a0fc356515cf2d62f43e4555476 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d8490d35cf6f8d26d891e289c470a5c4620754f3 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f206a49e88e63ca9c997cfd5dd468dfd820ad44b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/51e1d32fc8a34605e8aab24bc92e21b95b609a4d | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/41c8c162439c7ea5aeaa897780045089e4e37a7b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/af674f42e51a050ae8b4c6bd4a85b7632eba5012 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f2fa34ebb1c31c3dd87dd6aed121ab6091d46f56 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e1a2a1b913d7669d15d01adaa762c6027220ee6c | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3668a78565cf3c4b29589b7148b1c833e8d52744 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9a3008a5eaf92f9f764ba5e35cc0278ff87f58ec | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f4fe7651f9d17ddf36ef262f5d4a5b62fe3e0efe | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b8511d78da06c6529ba8037730e7296da54770b1 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4e38a59c1af2579ed57cbbbc072b3ffdf961bf56 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/397c4c672adc70401158c408b8902ee4cd5eae0e | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9986fc168345ee6bf8e2f605c4a7fd4cb033d28d | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a3a2ab8e21bcecc922f03aeeb4dd9c1b32ce3d9f | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4dc72999c0371b4dc96ebaaed50f6459cad12d2f | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/61b0eb59c731ff0ba3bb2e48a38b3956a97d72dd | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f97f47d5633758e5be97982e53c288386f63a4cc | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/32cf75e615a03677de0dc533735edbaab4662ac6 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6a74f6765801a9a75ccc312d634f6dec96f13ff1 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8c56e6e11d6eaefb4df33f84ff6b4a537d4c729b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a0d93ffec9500066fe373d5acab401a7fb26fddb | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fdf02ec42c3030054d5e1d4318673dd902d64824 | ORPH sh4 | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/2bdcee47f9bf66fa27a54e7d1db025ba62a94655 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/fc0008b4ca36be6fde4e87e0499d465598f53f3f | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/5faa6b857dea70f7d1b69bab6d96860631c86cc7 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/96964810631bc24bf80ab4480c77a07a30f32704 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/7a85208a485971659939f919c676483db291c03a | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/ac6b6102e62935ca11437fd633c8a0039f0d2eb3 | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/f5b46344217a389b8a13d31ff403460fe46b6a2b | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/8f25d204f3234c632d74183837ec5443419f6b80 | or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/36a94c0f4572e2fb353ba3527c653509e63e1b10 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0a554292a3fa5b7d86c1eb5945422621bc231933 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f041a29fbd9d792b47eea5ab20056281f9f31c3d | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/38667bf6441df96259ac1bc660393f538e5b7c7a | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/32b103990ed5ab7725f73c810cabf380698a6e33 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/218f2a14ede960b0308446d97b08df7a57bdad8f | ORPH mips64 | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/3ed3aa67ca2fd2a9d6e452d9ac84f5ba2f17b626 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c5c275cc392d0974d06e38cbade2fcd6108251a | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0b0f92acaf0cde1356020700e477510a53fa5601 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/cc3db5505ba27cef6f3acf36a6d9de67cfc55625 | x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1cd870b651e00802cb52671e54a0b4e995bd86de | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d79d745b1dcac868559fc5fac4bb9cd24d14b08c | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9ebc803bab004184c4477540546448e212766443 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2562859e08fbc39dad83a87ef609b976be93fda0 | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/20fed817b805b31d4ed0f7063dbc1051d0ffa2b5 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1db2b7b1d81802d343c35de6ef103a9dca113e33 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/49b4a55e41a11cb281da07622566a45082725158 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3a6be339282ff47d4b8b716b44d8042d5147cf3e | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5f8d43e364f706165da146b25191d26117679f97 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f8f48479532492508d535469f939248cbb9b5f6d | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/177269a8f55259e4e2c9dc69711505f863effd8a | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a3ea3db2ba4a0ecae1666513ad9de94474f8eeba | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f2ce1e6552383b5d1d59ed8415adf8d5f02affa5 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22f69a960a2af1139bf6a90ba6d14a1fae6987a5 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ba7db5c11a13198f9705f74c614354bee14d56ce | i686 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/16f101b411e52e61e7484162e2367750d002db3e | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f405352f7dcfa56480300567ec69d4382b013632 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/672dfcbed7d7cf68cc33ba2beacd2ef68fc6f3b4 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5783f372b67f4fbaf436c64fb342931105928471 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7f828486a52a4ca6fda5320f92f752478c6de177 | arm | coremark-1.01 | NOK | http://autobuild.buildroot.net/results/bafb30199ea58a22b9b7ce8d01e51eb43c54d0ab | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cc2d0aff82b35ce906bf718ea0d9734d3a5c2083 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d2e572c12458730a2a053269d1d076790be6ca94 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b3174e3c6e1a8ad4f70ce1ca7f82fcea23ab5d47 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5ba0821bd8742b805f134d8df6b16f9f2107785f | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d5ceb88c4d48f4474f4458ad5f69d2329fa76301 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c170ca0cd47fe91150a74891283999599791e1d6 | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a073c30f418f5a1f5f4ddebac4c222f4299297fe | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/57c771499768be9715734c66ac400517830b782f | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8f516da3185c51377e7226bce0bb996592172368 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e66b18864be835e656594857a70e2970fe9c053d | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fa12d773a05c0172ca5cbba51f7cd61d2bb7f6fe | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/deb33579d1012f0112fecba03bb799ec87eb7609 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3c1721a45135ebcde712649d757c07106c9e1a0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/60c95d20d0c9d87449bc9ee7557f770d1d3f49d1 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/37af3b4a41f37075ef3c6d12bea9afd29f7f90f0 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07c22135e724a950c4bafd72d8be2ec0d8175501 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9d4ff6bc6c2529c474dcd1277a9e4a7d489fc7a8 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/adbb5e20305e08e948482ab5e66226b2c6208df8 | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/8ba19b1032baf8340633ced9ec9f10f9559bc1e6 | ORPH riscv32 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f77bd5978467d85f3bd8740e61fe3d8963c3881b | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/1e8a70371ed54abb88de588673c1ce418f171804 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5fec1e3b172c380fb5c5950aa0c8857f3647796e | mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/196ebfffff849d478033b704b73a2edb8a17ec4d | ORPH or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5092ae82574fbd6e15db7989a1b7c290006bf532 | riscv64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/c0d6122a77e38d6ed1524ed28db2f948afdd7ac3 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/b4b89920bc99bbf6cfaaf2df2e4b9659ca796cdc | riscv64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/31d90386f0d9b43381db3ac286bd12caf7273fef | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/435d082c53b4be0cc02ad0fbd835b66c03680588 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5000ad32e22e3f8842c462380bfb3506453a98c7 | sh4 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/d50ddb9d3275d7c0d5cdd384432fc2391d721f48 | ORPH arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99ff56377b4f129427e7b4057479a1711ecce475 | ORPH microblaze | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/b7f79b79add34250f778f0a64d05928a12eb926c | ORPH mips | dtbocfg-0.0.9 | NOK | http://autobuild.buildroot.net/results/9fd2144909dc5afadf86021b23e9ee5131e0c30a | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/ffeb07b7f2d82bf3337ef097180c63c4ebefddac | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/4e3d9e9b94bc6423259763be6015e9dd4df32dc5 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/f1fd0c2b21b325260f7a6685bc8aa84b96d8294a | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/48457b9eb48b6b25d95eee664b7f808ba5565d36 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e77150428a8b05283094c1bb14b1f0f6eda4aa3d | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/641c18be10bded2407e7e9a01266eca7815d3a72 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fb7a361ec586b9433bbed45f49a620d476b28284 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b9e522280bc5afc9eff351d8d35d90f19f87dceb | powerpc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/551107a72c23e36d8cfb51c485f9c68794eabc1a | ORPH mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/fefdda58e7b30b18a311e314755bcf6fe9313138 | ORPH armeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/adb15e2c489e44320f9f042df342bd9258f156ac | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/db62e9c35ec508fe80708721741498243f13db9e | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5e451e771cc6eac0158d9748d3615641f85e67a4 | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b325604a888ccee75188d9ef35efbaba762479c6 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/a4f8f8a1d5130baf6d5d901bcb8a0bdab6bffbd9 | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/747dd692497aee009bcfd338924ef3065a125e4b | ORPH aarch64_be | flite-2.2 | NOK | http://autobuild.buildroot.net/results/d8d74e51ad5355a3f57e4d2dea0df5d7fed2006b | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/089c5d4d209436a79f508b2cf836ef9eed8190d1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/5cdb8ebd95ecfb7fbb8596b5e68f25a3027c1588 | mips64el | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/29d4b50ef039c3b2ec8305b7e32ec73e81ee2c66 | sh4eb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/2e105f9e4ffef4690fe6999f32e773d7e57d3900 | m68k | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/785f487a83739d65da294f68de066056c84a83ec | aarch64_be | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/1c7beebaafe008dd6fd70de8a13e26061b996c23 | arc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/645f4e5e9aa3d175890d5d7154d6788ca4ff4dc4 | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/45b07964429b6d78204b1c49ffc050ce41a78f36 | arm | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/f6488b6af975248f36876bbdec87b3e3d5f3026f | ORPH sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4de9cafd1a3d090ff2c670a25de06cc05829ac83 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f5d6d25032e92014102349601b6c125f328190a5 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0d1d0d0678d80362dda01887f479d51c3c44f23b | mips64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/579fcfa8a0ee7c13cd3479c5054ac7e192d318d9 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/13d44c59fa3d2c9aa70fc1e1144cdcc40dc06f18 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1447c70ad234cab2545e62be9af9cceb59230ca | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3747125f27b5a56598d2465d82034b45c517be85 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68393a26d7ed67f6a2c04ed9b885c395a54a37cd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/034fd9713203b6ec6dd62e740f86d8be8d271775 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b7cacc28721a46bcfc4f1231396bf4679753446 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b24b75a97b071674646add7f901792fc4d2c80b3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ce3fbc77347dc9c7b64e9830e7bcbd543efdfd7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaaeba9611d962ae36d1b2d32186a6ff999bda50 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cdc7946b36094527a2cc953d7ee4810546b086c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da5672a229a65b6d44d255c7d883a88e704106ed | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3596f36ce06f88bd2a4beb9d875a724e72e0cc50 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57163bf8a67d09921510c3a31d0206584adda6b1 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c1846ed762d8055e69027ad7f230ef9252877e8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d12f7ca83a6ad051fc2143781a080ee3c1ffcb9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0cfd892f798d2ab1e9244cf53e8512b8ef655713 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60b4cd6c7479e76d0b5b5c2c8966d3b9cc445d31 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13dff001c70ebb08b7bdb2b90e2d9ae4fb9af568 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c55c907b73aea1ba7421e016804c20f10c5e065c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25482d4d1a1e3591b8fdb22d17db2102fef0d38c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5991088b4955ee2923e1306ffa8c06f55d90357c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5524def580205a0b5a962cfbf614d35a6421e133 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d31d4916f623f42809342e2d04bedfa46cec0bc8 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91c9699cd214c18fd1b69747d2b8c1f9ed7e0cdf | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6a5426b4250e2f75025876bda0e16ebc7831ef4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3934666b916452e60e88ebdd320fed8a637e20cc | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c2756bf91e77caded5cdf8e51fed996ebaf703c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bcd546c1ed2e0c90716bdcdcb7b2755cbe6c3de6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65295bd31bc19f12571b66c2b462856b71e5bb3d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6eab2c65dd4a99cb6cae69127b15bfd8d3e794cf | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b68916d5df4b09219b7ece2af3ec9bec0e6a03f5 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96a9d0f14bced89cca5346b0969fc6603514c821 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e1c0fcfbfaf3d48fec3dcef55e1dfe611bcfbc1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b62ce0b5e164de1d201f75fbfec5bd997efab7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3528c3d232dba4133ed0ba344db3a1d44e7c7e66 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a8c2aa1673a13b5b958bd99ea6afd016f479fbc | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f17466336966f9be3804d17cd5a1a6d2a09bc65 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91a1d26e21fa4b2c4c69e1bd9ff04ede4080f489 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b18f7a3dde5c30365ef998e6fc2ed6a5ae5360e | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d18f23f2c2cb76c32399e5cff4d3cfd3f57a92a9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1376ac8133a35d7901beae38c6f79440c319d42 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9db290e383c0b7982f4d0c7e662474b7e1eada74 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/727c82281c10be94c0e3883c64220590ce39b2cb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed955a54a499148e64d5969bb6cfaa20b6da56fd | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eba8e466ae228a984c3727d0e6a0300d1b2799d | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10de4bd35566e2ab63366daeb0764f481fd13969 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9aa9628642744d6c1ed157944331fe14dc22fbe6 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b45c41a27a41ff1790fc004d707823f327249131 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4bd16cab099a2c0d2faee4166f4e224bff39b8d0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/beb7f3fa6b5c2df124be39eb737d90c7f8ce426e | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af50d69c6d2ac8e5e4514022a1c65ecf226e4a2e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f82f876cfcd98e648e9650a88d248361f55d1bb0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76abb1fc99d3a744320be891801d62792888e8e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/108191d15186266fe0b8d019b92735748e50d363 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e78bb2ec7411dac5ebba01b8cd0d591a5c93c18 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ebffb3d78373ae4d9d9ec4a7cbbdb91b81311eb1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b4ea44fd6ff8803d3d7b4b8372a43c24d63e9e0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92d84f9ec79085cbf25ee02b1662aa7d304f5b92 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/099fcfb556ec8a0c692d21258d0f641c6ba459a5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cb9b01eaf83015a9b8f4d962f4585c1530310e6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0461a6a5bcf34bc3cc1e1495b5e0d94d49b9d969 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d46a7d4f6d246d638b2ffa1fe829ffad2bcf7439 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2311293d835f9c20820f853397038615065018 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/476ee5d30aa1c199052d00f05410a9a98363b2b4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e9a83adf2ec3c4e8ccefd8fd0e82c78cef73547 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbd33274df368ceeafadd9845c2899c5947835a8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75002eaac22413096b3d40be279ecad780eb4cf5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a39c8c291f677f565ab31e8ac39d0bed8d9bc7dd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d555b16e96b0419b02d66f43362c30733da6519d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f2a5a9021ba0f3343e60f57cdc502e68ab28883 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56c81aff546b90362af6c92a9a23a095b790aad8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44a530add1a0f0c05b8cb9c4824e6f0335181a1d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9941ea8ce6ad5a3340376a540cf799a0b483d28 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f20db02e565ea7beba401419424cafb5e98b54b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e18761fca14fe7f368b2fa3761f8164774f4c09 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20b346be193838dee700a671b8a96872bc010914 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40660c2914ca93a600b5e670c5079792a566a0c9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6947832016168924487b1c9beea340f649da7247 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bffb3dd2d77076bc71fcd2522183f8ff486f2d6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f70b7f3f6118224af4c0e6fe0e5627df1bd2922d | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/654a3e8ef138f40754fea12c7554f3099017fb79 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04c8d05ea6522cfc6b97d24f63a1a5ed3d0a1bd8 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/112f92c8f54d0c10d1418a33c4eda5d79919618a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/024b334623a536b3024e4cf436071cfe648d10fc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/293a1f20a9124395b4998d23a1daa2cb77e83663 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9d15884e889ec327b9f7d31f53c53f2697109ee | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c99dc6fe2150352671e4078c4a951b14e6b9efb | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0fda11b2948e08d7f742bf80675c383d4b7d6100 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2885654648d7fa7fe083a1380cfd632be5fdb83 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef15ab63bd976cdb1487e62a551e00b4adb91a6e | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d355821a0036f793ae03e1f23af86584b76b85c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2add144ffc83e064a1417e4e07444c77381988dd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac52ad7233a7dcca5b209d709c68338f80fd184a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13586983515416813ffd0c9777e9881c82415461 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57b326e8713b0a87310b6d3acd6c6baaec0eb51d | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049942c346e2095dc7855da9ec860f26a3ff49b2 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/487f4699456fc52b229468f9687a8357b277ff20 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15e91b0ab4b8c715446988d17355f39d7bd1f777 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/468fa00010b147ee0bf88c3bac789e0d8c995598 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/224e8604e9a576cece0c064c42cefa24e1eeb343 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e738fcc1cdd718d51422f6c793d082d0b552e0e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f8e6e625f73a90ba8056caf10819f3574302c2d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfaee1c02c84e3a8770350e32ad0c639eeb2329e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f361b013b397d5b5560d55a4e543258807ae0f34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6b3766a1723fbb22ce88ed92678ad53841fe084 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2163da2eb2eaa86aa0b6a693488bcc9790f476 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1966045f16a2c02c0154e532d6a9ab87c7fb3321 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e905b4c8b828ea2b9baea7dceb7300a262276342 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/531818a31b550be667096e4aa374d3d0ffef2c95 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c101f370ab49a776553de3da1651c29890974dd5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf622cd470ab525d4e834531628509e095048814 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67dc1d251e50844715910c5080375ddfabc60969 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/21f3fd9fb89ae1f90ee14bb302b420f2d7fac9d6 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fdf7d711c88cfd891b697b6c1e616ed3f8e0a0b9 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e130f535c216979fd01803ac88d29b5ef1a16ad | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7dca2ce13e2bdc2d9da7708d8e9c5f49124aecb | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2085fd59bb11e2481672d72836cde0414224cd5c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae04803d5e9f9c1b3b3eaa84aa7f227dabf764f8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9c3fa57ebff1c93bf412cae0e38abebe0a18a94 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/033cffbb9432d6232e96137f2dc2d7c0bf13d0e9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18400cb867bfe208f7888e950c5112265efc3262 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e945fd58a1ef316050c0d812c028e312736f280 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6df1b20c5a69c4bbdb7d226c6fbe98d8005ea114 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/723b5b17cfdf936e4a41cb9f43720f289f2c11d6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e1dbc860efce5541621e4a7f69bef41a6b7e452 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26662c0b6f562a4a1174a716a5cd76b2636ca1a8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fa2fedc1d96ede15c3bcb29ea242f7b706a3977 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/19305f6a94657c77559d4ec4e93ca6fd6ab405b1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25b8a5f8f99b09903da26b4007eb649fe5cd50c7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bbc700c0d55b954da75f89783e27f08119a863a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4b5669e1e32c74fa14cf26d5f7d138092c3880a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a075791316260896bb8fe522da77034eba8a442 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2e95531a4e938f149964298def7ab1ae92a7e85 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e4e1120961bc34c239b07650d595b026761a1fc | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d871e5142c79c2d97d46cef150d78e2e3c30bf1 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aee20d44072f2bfafa1893061c7c0c8f536cda7a | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfe83f4172ec4f5053d3dbf27c8f3e86ed9f93c2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58214f26f7b98d5d6d3c5066ab175136dbe469e4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8efd12d9b9dc09a916f2b89f3b8e55197e22dd7 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3631142ed1c9d3f3df1f9cd8c837daf750117a15 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff09c0375d4b5210b25e7c3983494e1370c1e16d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9382270bbcecf98647857cdfa255c7329f4dffdc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/525c0d1056663849659a1e29661a026a0e8b13b3 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3513705bd4ee19bb3e4ebf088f2da2bb2877f596 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7c332732860395f668f10229ff9cad2be8bfd56 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b33b300e7d45d94eaa3b5b9167792b6dd9fc97cb | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b16c6201a8afcef54fcb38d2689a806b0676ad51 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aca6414e68e91806a8a42fe7f04336ece6a49ea9 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c575a077e1ca7d1c20e6ded7dea224a3ab9a9f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/859afcdd722ba4294770615c892fc7e42a338570 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7b3822e293a29978c44055983168f06561592a2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8138ddc9db453f687e3434e74d7142f3fdd09e15 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab74ed0ce42bf20429294d5df162e77c7332a627 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fafeddcd92be8f226ade2ad7677699c64216ee43 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cd3409694f4eaba68aa01da48d2147dc0f23197 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f926c960a2788b8911a7f58ae50b2d320a2cfeba | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c6b921949847bbf920759d7658f9961c784cbba | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/662d78b8e2c4e43b8e050c721e4500698ca520ed | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/793557413cab80142ad5908d7b8cf568c65159e0 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70c5ff8e380bcffd310ea67946bf8c5ca06cf5b0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1403ec0bd8a27142bc79afbd1f732459410095b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/398a6b6621807e4255251004b0521e818183182c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0246bc157158f24ece04ea38adcb1d73f063c08 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92139b2d1262e3171b42a7a0a87a65d5cacea4c1 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e9440d8c1c0971f228f39e07a6947d7b1fb00ee | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99faa45b892a622374980585a759c700b1284054 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3052f95f242775edfd6e81a89dd310a0961398ae | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/648108276b12836e1007fdb389daccb38dbda154 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50cc1a401e0460c18f9a741354789d3bf83f7bb9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/481c4617813da031beddaf00b97440071f646809 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d018007362db76f75201e91a9ff987797c76ff6e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa31a0fcc007c1f929400f6567e24688b6c1a07 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d2f9738deb31c84de9e2505cce98eab4f8800c7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/125aaeedef13bf47571d7a3def224aa4f20f49dd | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753977a39fb730804f72588576f0ac531f50f17d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f441cd27a15925adc46040f3ac42dc1cd1272a23 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c878436f6c13a1a79b0dffcf812cd587b5cf2c3d | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3abec1a8ccadaafc9bf1b4c137daa59324163f55 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0df148f6880b56032eee2e2077ce2790b08cad7f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6240fa8bedabb45dcaa3b6602bec9dcc3b4ba1d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/856e4591a3efaa6fdc6ec6d58f153f8a2622ae11 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea5ddc415b7e899a9ab6dc863a630a42338c9c64 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7395971eaefb834a970bf856e35734a12d144ab2 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3501d11ae1563425c8394835b91b02e10bb1b67e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c39df85743e90453152038e644d99443d9839c0 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d0d38691e249bb643204c84962479ae1a7b8e03 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57a3c6bc4b7a1280b7bcd63b5023108a4b55e19c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eff367aa8553e76c7a3ae073c0e00a32cf575a10 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6445b80d4a036a6881e3898ca0ad2847dd800fce | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51a1083b3b698b3e7fafe973b87800ece6f65016 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29c8217bde09b4f69faac8ac1581e5076298f334 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b53c5330e77313f26275ab7ee1bb58a9005048a4 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da0e0133c8820db9ba8839f995ec29bdbfe79a9a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/280384acae952f6b95d9b3eda6b0e05e75815aac | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/389d8cced7ebaaced7a737696ac9682f2bd81e47 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f20364f6762afbbe2fbe9dad16e7eb3f5297be7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3131142080dfd9eab1d97e9b38b5e500ca13c863 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1990d3f25d266dc2ca547600982d6b5ae35fce4f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e056378d9e4dd72bba41778617fb9aa8036ed416 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae61f18652d936759ac061367871f11e102b6715 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce7b455b58bcf792463301522b43958dcb50f1cf | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2f05c368e6fc165ef3224465b2aa2d6805074e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa2d4115e3c9c3cca1cc6c9142764f3d7fd056d4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4285f61869ec9a77cf28e7a0259572826fb46f70 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4af6c38457f130e59f7eb3072fab0867e18ffb1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0341630913b3d8742693163f64959a0ab6fae953 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b23d2582c938e70603b97b363b017a3c8310af46 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04cca64d2d3f29a70ca029746947ab5433ed6536 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8eb4968c98b15535a0180c2bf34c1bd8b367c34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b8903ffa28314646c176fbfd5bdbf5bb5212f2f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f72e9457cc7367d4cbbe81db39123587842d631 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b487194ab30dd2f7fafd5249edfc0ed5419779fc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b20b882c350cf51d90dbee9e3b4f16a60a25cedd | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a57cdea432f78003d9fe2beaf9b67ef9455f206 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8847f49cce9b5cc973876ca6c3be9c8c54433ff | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eadf67c705782e3ad95e14786c788d01beb22338 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b7fc60412fd6079f0398d667f076e23a5b84709 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6b4123d5fa2ec8df981e2dceb396242698e8b25 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a8da0e1363bcde90bb7e7b7c6de909f9788ea1 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecd1082635f21c693b4f5896bcc675ace02cea21 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ef5844277efe3cd525637c1d606be8dd55cc44b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de6060b0525beb3b96da0f587d3bcd441201e30d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2bdc01ad5b444e104dad3d6d549874878f5b59f7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66da542cade33a7952f6bedb3cea015381357df0 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8deab2bca3c73c2caef7ac7258426335ae7f3a0d | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecedc13d35677e39d78e8c8dba3e2634c5fb79c6 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5b5895afdda250d3adcd3c627b6527c916ba26a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47360710bb59e9a185bcf2cbc667f47c06a68f2c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88e4fdd914fac80716f3592e4e6f144ef006ffef | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1189c06ef6d5338405c16940a56d381582febe02 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/362211e4cde23569b093f5764713e84f2cc5ea7b | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/095f1d64ec43514fa33f2bd6cfdb5a00e6f9fa78 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/912a3b98a2ff3a1e489368e1eef0eb0166ee69e0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13f45c7bc963c136ef792a7a0dee23771e96ef0f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/17bda642770aa49a9a69458d64f7b1bb2a749279 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bcd4b86aa18033d0f187db96e2e37de57a2fc080 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/102cf43148529ded3e7eb81c412641c0f1591e68 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d998ad78a13faf2e365d612d3bb69c1097981f36 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab0b1cadbeec1e9fd72299259535f8adebba669f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20393c48c11298e7533c71b8de75d729549cee23 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d7dc5407a0f75245f0ca415a4b38e2b6fe7ce80 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9f395d70474baf768f60e0fa182a59653d5455 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770e7189f750f875cce41a667e97958d6be55bb0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c160f9198fa34826751e00acc7300e11d85f20d1 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2139c83b05c3b27deaf5d4444cc5d856b741b3 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9eed1273d9b16cdc5bd02930461a87f2e16db1bf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d77ead032cbd2afad2299b57731e65719ecf7f2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4550df77c21643b384ef7cf547489331326db229 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2ad7c04585d0465292e7c0feaa511db05223d5f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c12df81968415f3a262edbaead313007c482481 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99384c3c4af05fcf6a95e9a55282060213300e91 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c772ece1133b21ac7446594c9c7631ac702981b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0589d71465be945f59e94aa6def120bff951931b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d8f080d9473cdcc7456ffd263bb66ebacf57b2b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/052870eb8f49346999499de3a867e6d1c3a51184 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69fd8313995b288285a678f40e08469a610f47be | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14becc73bd24cb99dec61bed140608e1536fd4f6 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/336a54d90ba96d7625945b6017fb99b50d738f63 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05478b283ea00591fad1eec35b2547b819c70bc6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba0128fcad9638b1540823349156ae0d3e16e8b5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a37f99a0efb0c81e53f8665d28048e6539aefbe8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48fa6245728913ff6f17808cb1aecd7f2ec3f285 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a536bda1bb52b164e7676abd6717ae63b5b19f79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ab083287e77aac1fe7fb355aa05ab4a9d14e06e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9b500c16af76b6d527776439e4bf591834ba782 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d103f8bfce10689d4d5cf814fa76f55d07cb4c6b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4eb559ac4269422971992755aa3c14692dafb79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6d39fb4a892716e1961bdd9bcc8ea2654244b78 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd370c518ace5614b69226ba12559f601951c9c9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43660463c9c0fbfefdf488410d1a8a5bbdf00de | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cdd41b5b6ce10b8c7c5c4d2f17bbd3196796c2cc | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8800b3c6d67b1b97987d1e8de92c635c390a09a2 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb25f327f4ebc55df024b625b5f4fbb02c9b7a95 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3046362cfdbf8c4f5cf65e8da7b2500a9aa41ea | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a4c665283f114b1e84a1ae3b5d293ce5805d01d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8feefbd5da4664755dafb0e79bf6de97673c4148 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eab9aecc2d29af271f3b2b75c5a7323b4b9ff | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c49a03aaa69c9db808655bc3d47c5834c7579bf | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07656fe853536e07d9746e6bc27667812c5e095 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95bf0c07fce9fff942d587197fa50bc70ae5ac20 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a5010e099c23db1689abaa8609d62208c5201ea | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f906cae1ffae6bc1bcfe93a6fb9163a0a052e187 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67406289b02f7d79e45f535b80d41585f8147e2d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b86202c610673e3b74e91b40878735691147c89d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3688c83a489c3ea9073b1ce6b10ab0b60829cbde | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9237f3d954a74af2319f3b4d8e51419d1e1a112 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86018b0667de52c37737c7281acd3b55467407bc | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e35b2ea834a7b11a9e67c09cea08f51193b2c973 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/035c6d866f3e28efd8c85c26e25eaf18de234c43 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0437b3f8c63e19cb739aabb44c2ab58c6b78bc4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c461e23956fc987a84a3ffa1d14b48e7a54a9ce4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f6128822abdc9def14ab3804450201e4520290c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7536f313c89df0196050fa12f2852f141eab6387 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7dc6ad1c4004fd2dbef4a253c3a3bb18ef76fbc | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be47783ff628e88d0f74068bdbb78e15f471b011 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/217846fa3d889f88f8c62eb2867be4e69f65e138 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0160b6ab56b2498bcfde5131f719f6270a1dfe80 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91aa0225f8e7724d40fbd8fc818c0472f604d92d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d6430eb9158325675212c4694fa897e20dea0772 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e6ab62ccc196fdd43b24143e91e9f8ecbdf88f1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/467b402183e56fed65fcb28fd5020aad3378029d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e623f6f19a8c36a984b063993451dc766ed0071 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b79c2ed3744e816c1e538d67e03760af822e8e71 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5d91e78f9c9815ad9b2e75e586379afc4463b83 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/722d29b185d8359a8ed398fa3af97cc0257fd06e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5f10456bc2647827b2ceef40467b08798e29c17 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4986ccb894f1b647105de401fe38c567cfd3be39 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff83b2a4a0bff61f4eadab67def47c6857c7e7e7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0285f9b5cf4b6b955692885038c51db6ef247616 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bea860e80c9cf225b0cc2e582adaf7cb4dd7eb3 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0ab6aadf77cc5497bb0b38c26824c2797e70e10 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c61087df941d619dd0c28b0e1e6344db704d3e5b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/593b3f0420c966d4c06057c04305a456c9f4dc23 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39ad3a5eca12772934a581f525fbe9ffadab0029 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75eaeb46f58c61aa19801abdf166789ccc0e7541 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ce04f414545fcf055dead857db45030b984770 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/577ffabe13af99bfa782b43dfc51681d2edd6e5f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ac6aea3fca0d0690c9e576bc9f346280a39dceb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6b31a8ab96144e8f44f70b11305bc7c353e1ff | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9008fbbb4dfbed85bfb47a8fb19769f928b808a7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95754801600419bf104cb8f052c2d4151cf15f80 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60990a5a205a13b57e382104a9beae81f9e7da5b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d07b5ed1693f19606e1ec396ba4ef1247881115a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b20c2fd6a0b42bc9d10e44c50dc754cb07e557c0 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/639a80ee19f9af150768fcdd29ed9030c9bd42e9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05fb0639c15da71a58ed35ead144c8614505b432 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/605e8178b936a933a880c7e70c8f997ec83b4153 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ba2ed0c5a330f7e2273ec10a71c68478dfac22f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8d0487e7c29ce6a0de60029a58bc4fa34d1ce2b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30673975c609ff9945a637ff4e5b103e73df8cb2 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/313a1ff0ef1ab3ac16fe7970a11301e8411242a3 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da8ae8305313c5250e164f2950b4363206fadc79 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/daccdb96bfe96ba8ae0398b7a9de29587da9284b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7ff3947043080e9b3b110512d26919adb74e021 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/866884501f385bf63255204ff2077ab9368ac441 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8abc3ecfe1d248e7a86036171676807abd0e8e4d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/469767145c26531b04ae4ed28f82eb78c4f431a0 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae6083d0681fb44f79d44dea8c2162df155d2c40 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b9bf32bd0c3e351cd95408229bc4aa3c1659e8e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70b1b41c82d93aaeb5dc4a82968cedab1cac3f17 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e721fb2e3d7344480a0de6b406d450f36623b27 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1515d5b20f37fe3c33809b306869410c1edd5cd | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6008380eff951a31c79431f63c653d14b2486f6f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a191f65a2b5ad06bb04940eddfb546d3161e471c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76a92e03c1b083ac8c42581172b086202d541329 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f546b2b6b734d0c0a655a430921f6c8a51396e34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f229e74679dfb28069866f6a5144e96cd9cabeab | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c227bd1dedda679f0ce310b19f48bb999ce2c423 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaeb186ba72c1bb3d3453200b2243aeed4993364 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c56988ccd43603d7b3290ab5cfa6ca44e1686d6c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c551a712d01f6bf790bb9616fd438cbfd90b81ae | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02c8311151b020a25b5d4d4a38bf8c4e9c6e4f03 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f9e85c1cef7faaa93e220e849f1074dfa1f8e4a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/768a920b9aeea134e4cb6b9fc1134acba3b5cecb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be97387dfb41358136a58e60435673d784b17ad0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18e4c00980a82c14f67b29ffdef507d652fbe3ae | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b4c8ad037eb9373d149c3f5fe626a4927436934 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20bf360b52c315f8724d95c0c28e04785b9149e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f034acc6e6c9be65fa64d9f0794709b363f42473 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59d2488d6846be206ce1545156bca059e3e4225a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93f3face642ebfeec8b238294c69351b5cd15eb5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15def9beaaa35f0b9bf096f761437b659565e672 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eac3bcef4330f951cd3baeade8821500edae5254 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53910cd2f938f602c028e4f594d9d32fa22c444 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01200ed27548614d0e3a9aa50fdf4b7b1bd4ecf5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49188c549eb37dae26719d7e8f952a0eb921295a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e98fdb82fb2f5e6ce082ae037faed771b8b32aa | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/689b3f2708c7841b412a3684553a95b7dde75ebc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12afdc74d00103eb872c70fd2c93f3e2bde3fc70 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38cbf2ec29b03c4a8c2c3389fdf8328af1048159 | sh4 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/dddfebc5dd8f0ae0d12f0fcdc64556f25c7d5480 | microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/2573ceec25ea5930a4cbd8421dfaed8440f89a6f | x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/f582c8ce5229ba1dcdeca631e95e9aed05fd356f | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/398c06fa7b2df182ae1f091c755410e2f8029715 | ORPH mipsel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c1fb95e5bc69f7222de06ad78e372568415cd9d5 | or1k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/3139288d750a68c523d00fa51ac0e3f3b8998b14 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/1c0efcd2c921979aad7a4b44c5f0f7be41bf4168 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9d1e511f3ce60fabe5aec21b5717020710eb49ba | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/e656e719ae6ed88bf3961fde95e005bc22879a1d | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c16ce296b4feed455828930ffd3ef3a327d1452d | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/25b0060529341dada621de678e8e41e080dc01f9 | or1k | hans-1.0 | NOK | http://autobuild.buildroot.net/results/56e6d8cdb73e5dfd2749f3f577cee565328ce799 | ORPH mipsel | hans-1.0 | NOK | http://autobuild.buildroot.net/results/27a111cb9c436f84dc92971d9e2498139f6a2e4b | ORPH microblazeel | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/edd82e0ffe72072ec71359229d374f5b96b6616d | ORPH mips64el | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8eb17e93f4d86c6ade6986ca1bb8b19bbeb789a8 | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/cf7bbcaa00946f1ee9742705b3ed1a0a13c05124 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a7e25f75c803ef912063306ea2d15a187804f8aa | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d506046a0b76b926750e6527c137a913ddba0fb0 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/eeb7586fd778dd66efa45bdf75af8e37ad236853 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/be57eb9050f80fd34af8977052beaf4927e19bba | xtensa | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4c3066ddcf2e799cf6ddd6db5de39d8267aea55c | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/67a7166ae71522dce1edf2dbfa207d7289ddad99 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8c58041312b4a7030d3fc16fbe36b6148f04acc2 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2601cc177743799d16f6b02bc7d32468ee0b4888 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/424dca5af2726cc23770ff4884c07423e746daed | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3067d8332677e33b3dffaa01222c88431ee5d55c | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc802009223d43ba9e18ba3e5da4f605933c54d5 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/54f26df18b8daea718fc4d0b2ab6c126bccf31c7 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/98d5aea4595c7f1fd11da8fb2a871b421dbac7cb | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fec296de25fddb227874860a81341f890ed0eedd | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/40251ff2986a2a0397436aba201ea5aaeffd0dfe | i486 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/58407bb58b4b7ebcda5e2bb4c531ab2fbc608e51 | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/922e6aeb9cc59850b66365b8ff44bd5e5050ec69 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/43fadbcd518e524b38f039cafd2226eedc51cdc5 | sh4a | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/17da3b1da2d4a469af034864102a1b2039c44f56 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fdb9590c12ebf1b983e4a3c5c9ee353a0daeaa80 | i686 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/781b68aa11caae24551412da7835a28b7357dfa8 | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/8c7317d7e5d2759c66ab896bd56f0be28bf495ce | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/59686f03a288c98e86157ac7e31ce563284f79c9 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd0385b69810d7e4620a45a02cd61a7902391308 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f731a96a903e23f54c17bd276a09df7d81c810e5 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2cd30bf2e5b145203967b896863c3304fe496d44 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d8779ac11b993afb33316312459d85358c740b8 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/876f7d71ab184ba105d6ecf601ebcc1f7421c6ee | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/925fa3fce9fecb03568ff27d6ebf561f424b65fc | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0a10c63d0a45834e783213a88eda6019a60f369 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e0880b325730750148aee00b4bcab085e60ac7d9 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b690daa7c7ab647f10db0ed5d5bd201261b989c2 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5c3eb1884e7b1c8c9459c62e69ef9b3046d597c | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8fb2cae15f096ed0ac2ef1350f59d81339b32d26 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0f13901a1afbb2997ab955056b25596e3b41b846 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3c3551281ddda4c0815c8713ed879f725ad9528d | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c548b5768621a3590d6d4b4159c0cf8794d63d31 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/afcaf0e5a8ee19990af9744fed9ba005d0e72328 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e72361a8a5406d8a3b336632bda0d387cce9480 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bbd9559983f02aa436286cb5bd9f0783c01372fc | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a413d2387f8f1e995ac5be4f73bac51bf501e717 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1a90d3793f0a38acd70a5fd5bc1af30bd90963f3 | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5bebd8cee85a1ccda37eaa13b6dc67b7f1316f13 | x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/c72958ad9ef91bb61e2aea82c448fb421b713d00 | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/01b5b3699b44f06105d832b4f9072787807fee96 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/16f5ec074a929a7182e47e4e5731aadddf866ffa | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/19f5fa807190191b65724df6654aa13df7c1da39 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/34c6ee81ffcdf5f03f0941999d8e80f9b58131af | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ea2a851207433848f763dac15bca49106cd8a21c | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a418f561f2297a813e4a21294e1501e2fc77ee7e | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/58f8911e56ab3c4062ba179345105ece04f3f3e1 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d5a49cbed0061e070eaf3d3ac9319b0c40dfa033 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e33526e8689c012832c900afb098d2c3488c4f48 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/12a7ed73ca5f6bc9319f38b2f2adc5a393fb5c58 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/0da57fa67f8ec594359c9a5f3883a7b2262d2fcd | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/7d0fd06332d3e5fd3cb731318f99b26fe3adcd66 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/f5584c2ea8609a433189c85d77c20a15615d9a1c | microblazeel | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b40bde07b27bf198a8cc4477522ef40b39d37d1e | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/04fc338a4fa050192b44ea0f963865febc6bfc33 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c2ae9f3c6c4fcadd3d0805c3aab96729007a931c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9ab008e97a0573871e669e925646c4cb4da79a98 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/db9fc53ec1f4d3dd844d008c3e8dbfae6240e64c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/61096b1d810305113d99c1e4d55726c8f3ac0476 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6bcd26ddf560b8ba9ae9488446f1bbbdfe17264e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ab5c1db79c8c86be7b710edfcec59605a8c209d8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b6dc33b629136ba6ef068b6bb16918ab86838594 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/128275f68d91d31b3a3756e0b25d097685c26f46 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/222a77110502d0106ef2bd1454e8bdd2e843f4f1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fb815a48d985cc5d5781a591f49534373f0acc8f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d4cb867b5abe193af2bd0ff1040e941d6a4ecd44 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/eb144a0c1637026f338607a105efa048fd9a829d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/78c09583f5b72157a7155aabe1375616c51b8496 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dbad924ab1dbb98fa639ecbf3a1d2b1ad1d6de85 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dd60a7a6b44daad9ca7be78e7f52e083318ef8ab | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/03e02f22b5a938cd04f41e3b4a875dfc87df41f3 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5982f9ac2677cd56fd19fd263eb942c3709cf3ba | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ddd76c17074d95382a1bc5e43452b4de972c2436 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4faf6e38f0fdc7f81d96c7f25aba7c70a2b87498 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3c1900c0a3be12fa179e02b221410f4d0dfeda38 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1a2caba49c8b4e97ec703131acab904932b54023 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/238764ab72c771b1df4ecbce4bf377b2c46c4b6b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b99cf0eeb66dfd3f378fd95cd9c4c9411c172891 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6ace6eede4947025982438a9d51c9ca7d3560b71 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5bbd73a60d8565a1ac6807c76a2f26b5bc52e345 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec9b7cfca974a220c5856a8f11719e6a2e3b5344 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef405cf95723c9b8ff8399586587d61c528220b4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/04f31b57045317947be6098e245a4866e1267fdb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c47f6c86bf8d9aa930af21fce8e5507f7cfd9aea | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/48fb3104f14d2dcfdd257ea0797a8cf543f8e63d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2371b6c6f3d6d4c24544ce4c9e052937515803d0 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a4e9f49d4b1d23ccc802599cc2ff2533086bbc4e | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce83e4021105c7e9f720d214a90bee4023acbab9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec546514fc97a87efcadc1dfbb534bcc7146438f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c1d992f6f7610c6cb6ccc2f201484c674fd5497 | powerpc64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/07d030414b3d8a7c5cfd978bf6d1e5cfb1b10bff | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/71160e561ed1ef847c2d7147d1325702ae5eae57 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd2a1f035ba4d5738890061006925de4289d4a4f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d47b321c4eb70fbb757a6d42c1d11e044e2700b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/afac1e13c892a26fe3411ef196d87326b44b3b41 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f944e2907bb7368b7aae50918bb48251c60761b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f36f11ba116ca39fa3d87b511360673ac49bf4d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8ff8ecd57d157abb6ac272a7ec2f4fc69bc13ca0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1a4a00389bcbde6d6e6f3dc663c2e4a6a4921ce8 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/418d43b831fe6745f0f4aa4621d34370f296e7a4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/65e73146c9a7317759324b8d609240a472900a1d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f9f44543b8edc59e5df9676aabcd075273e7c35 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e291c2f3ea33aeca8300f1eb932c38bd73029f8c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec9beda9bc89455eb98f22b91a69147aded49024 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/811b802ece04e1a853ad52249d079b72e8ec0904 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/6f42661607ccb1c2ef0b720e57b84e6270662aac | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/79694c853e91811a3280cdda63cbb2f58c96c838 | mips | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/22f3ed9662571bd63218e782eb444a0498367e20 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/3d912222e2448518e893e46ebe5ab7a442654c0f | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/57a73a63d425710d3a9fd5cbda135b22c7969ed5 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/465b07e7688fc645b24e74558c3e04333bbe6cce | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/661266820547ef1864873481fd6738a2dba5a8f1 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d9846b17d766c8075494916c95eb4ada4788af3f | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5864ed773c7095dd591fe5e112fadb15547cf726 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3e1cf94671b96f798fa28507de9e2322fa68398e | sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c25e1c3270e9cd45a019a17780dc3d301b31bf1f | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/000d04262e52c42017c1cb388199a8542372eb1c | powerpc64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/bb76812a0b6b4bd69eee0ba93f39ca7bd95a9ccc | armeb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9c248c4fed03b8bbcbf1e93a6f3f89dc4d404dbc | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/b92ea9e4d2783711fa584e4bfb8b1d8a54e61947 | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/92587aa55cbad1a4e45fa8ba0c02d5094ab687e0 | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/69a17ab1ba240c46d75d18b402d5f43f9168fd83 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f592ad603ec47a6b3c9471ee571a298a9d1f00e3 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a14d3bbd172e7a4238ba6ea594d6ed9d3019593c | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/425593307f6682cd71a638e03189996c92dfeb4d | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5be0d99f6e444ce1569f920f381f9fa9b83058b2 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0153714771e9f74240e00a47842d93d167ec659f | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/04797bbf00e47cb88b1ad03c87c6f3a74c35a79e | i586 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5ea89f6d6abbcb15913cc8081b789ed35a03149 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a5637ec30e169179a68a0a989dd8c5e9255e01a1 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b393bdab3f154f6ae0109edf93bb263ce4067e13 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cac24d780e7c776ca6720e608a5af9711f4bec | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b0fdb34ef20aa3f99231fe0c38b185c11592debc | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6a2f738bbea7e7a4b775310a0cbe0887966882e5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3a3913c365dccc1d0e618e9bbf442bde84005f04 | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/254c76223ef0db1cc11e621e2414b41d4c13a295 | mipsel | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/5dd44072f04898f328e6241e6bc21102f891c819 | arm | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/bc5580b84260903615b8650ca53511a51d8b4941 | arceb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40e25e396e2fd1d05851e700583c1df7c0fc398c | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cdb789199bee01e318cce23c4f5289dd7ee88e94 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/26ad11b20114a38a73b0633409ae5da3baf2c011 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b0456d5f2aa674ab70cd107d5e9e94484f01976f | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fdc538d7c5265ace18f427a582a3ac2dc9919cfa | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/bf42e2b5788e33024483ec87ccdbf333a40c4ef7 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/72d43fc2cd756eff7ff9355d64d7a45d31110a4f | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/260661e31b2df08ed3bfab561a3fad394f899a21 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9f6f6f4cf56e230530256c7d752c084b0a1178d3 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/72c0e6d538166d6234e055c97ded326205f027d3 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8e3d3ae7416e20a2e03eb1e08df77a6f303d024e | powerpc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/7003399a38ffaed5a17efd783276b650d153cfd1 | ORPH mips | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/b7162337d7ccd032cc59784b55d10921410eb7ee | ORPH armeb | kexec-2.0.25 | NOK | http://autobuild.buildroot.net/results/8441a392c52b812b0b8f2b3a44a6d6ed1e4da6b3 | ORPH arceb | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/dc56a69627bb2007f30f5d740e490a0e5b99345c | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f9baee7da8cab72583bfbcfa189465bbf41b77d8 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/01d9881bebf7ad56bcd0e2a0128ef0d63005108a | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/ad86634115155bb515acb90f6b53ebcb41bb60d9 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a4f0e1e02540ac591b7f04542017e27c8575f3be | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1eef05c7b38520ddc5966a2fecf188eab902f09d | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/896919e82e698531af68a946d67dda6701201628 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a038209c3580f8eab743db8ddb4a777f0a82e4e5 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/85519741c23bdadf39a78f4b120c8d086cdc595c | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f87eb71ba9cec7c4bf37c20f40a57ff622fc5a6c | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/df7c4f2a69e185ff9f91f0e0f759febca9583efb | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/3960c55e90f5cd2b09fe7dcc58d0f627bd148940 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e0b1b33ba72787490bd2f071bb7bfc904b629fd6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f4c6df198c2a3db1381a79f4f3b9e148db6ca6c9 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0253b05955d729738072d7d70d1295d6a182e2a7 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e0d8af6933dc932c648fe6866a9e7744a1968f07 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2c3eadfa5aba8965afca5174044615e28d828b64 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2e3f739729ffa4c71e8669cbb22cba26e4eb9a0f | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/7259eb7ef9eae5702eb17ec228f4312c534981a7 | sparc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e9ca7bab606b5abd576a2d4ac183cef158f226a7 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/842760619da7357ab9cc9eb632222f83edcf5bd1 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/c5783644d812b7e5612d82edd8887ad4341f03af | sh4 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5b10a0af5b1eb0501b0ac31b2db9a1af72a899cd | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/2fe8e6f16dd04813f564b1c0fae3e5bd8bca99a2 | arceb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/395f6ee40ede21fd3ab3ccc9a94f676154449be7 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/fb5d19d44206fb3913833699d8c41dabc5773ad3 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a614fdcd33e70592ab1591a19eccbc1e21115aa7 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/83e3590752788c8d285e2cece38dff30c9ff61e1 | s390x | libostree-2022.6 | NOK | http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0 | armeb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/447b25720db1661e3a84202f333d139020b4964b | ORPH m68k | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/0dce5065479003ef68f74df8f8465640b1ba08b5 | ORPH riscv64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/be5c44b05b4cc597722a924b40effc30d7b293f7 | ORPH mips | libuci-4b3db1179747b6a67790... | NOK | http://autobuild.buildroot.net/results/9158ca7e6f8b053a04d6faa2d0cd4ed15cdef4ac | i686 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/d73b5aa2bc413ee7bddd4da8b71ccf6a8c272356 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/dcc526114a2f2ce1aa7ed33cdc2384e7be8dd6ac | ORPH sparc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/ed5603feb43c3f85ece05fb8de7a759c85b1172f | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/69bbb9058914463f48e2ad4b23b12f1ae2e3e95a | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/0a98b2704d5e77070d0cb999e748cabc0dd796ba | ORPH nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9b17cb0955d58b621697fa7a56776fa09c14da05 | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/71f57dae23cb1dcc84bc403726cabc98c3a872b0 | armeb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/d31b48a102fbdf2e24ed908139d584794e0f7ca3 | ORPH sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/2efce22efdbda7f0e796dc9c3d270deaf80908b2 | ORPH mips64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/bec76520bf9020b494db93a90d5d74489df1e928 | powerpc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/498572f7abc1dbae252ff7c459f80ea8986edc8d | ORPH microblazeel | musepack-r475 | NOK | http://autobuild.buildroot.net/results/632a86e4e471a58e518ce55669e7b4d0b35703d9 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/ea296af38e0473d17da3f0d8080e074aebe90ef6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/7619319958cce7c7197cb6bdf0cc4a2e4f0a5221 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/7db2305156bae5d8e012d7d3fee0efbc6982cf75 | sparc | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/43f1295a1634804a4fa577fb9f8a8a28723f83de | mipsel | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/4e4fbf8423faa29ee62c5189c5b0a562998cf687 | m68k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/a3de8db161d71261dbeef02d0a959fe2d51eedf3 | arc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/eef13dd87ccf488948f448cf53b9951c3ba3fc90 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/a8c07e4458f6426dfb6626679e9b27d141adaad8 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/34cfa0d6df7a0e182a62b8039ee45c99b4e3ada7 | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/83691c2c05436d5b15955297ca7a341a58c7a88d | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/8aa144acf1566a932ab1dbf13f689474c40a5d3c | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1bc4d3cccedaffd410c040a6abb15afa722d52ed | ORPH microblazeel | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/6c29ca77ee776897d8c41e6d529fa6ba9e102cc7 | ORPH arc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/03c5a53f90c6e220bbfaa6e0fd6003722b2dc0a4 | ORPH xtensa | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/02966b70723d46cf3ee62c5b4d97359aa5b3db02 | ORPH or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/f9e7900d501ebff948ec7308ac7799e07d586936 | sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/45a57f169631b1317e6e9eb0938719078786a67f | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/810e955c26ea8f6c0627d50cc23e9e8378d51b80 | ORPH i686 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/7bcf5a314c636d380222bd954b3decf0f9f8fb82 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ee0fad6e5711f201b3601b08b3ef4902cd430453 | sh4 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7c3d7954aa9628e7ae25943c8f4265b8a7ff7c9b | microblaze | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/a52b279b2431807fb4e2a6f996ab54a85911ce92 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/c8850a579a83be6d693a15e2ab914549dbe901bd | aarch64 | qt5base-2ffb7ad8a1079a0444b... | NOK | http://autobuild.buildroot.net/results/48a99ad1c80f914020640e4465bc4722ae988931 | riscv64 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/cd9812aaaad1bef79f6916051145e9814c1c93ee | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/2600d8e8d301df6c49bced9aefb33a90cbfbf101 | mipsel | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/c48ccb2547d0370439571cb7c5794a6385489e83 | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/64df0c9f5dca57714e506455c96b6263bea57471 | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/749a8e4989ca7c9df1c78a95cfd55faf8715763a | ORPH mips | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0536730c18546b817a882dc3b655bd5efac9385c | ORPH mipsel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/02bfebecd1cc56fa65029b1624b5eff64cc81d2f | ORPH arm | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/a5238d4ebf8bf381ff5266ec94e107d29e988146 | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/16abd495f900f0ccc959f75897d212bf3bd61557 | sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/83791d2e4bef81bc74bc5259a46c5b4964b9772a | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a90ce64e8be9fcf1ba720f0a7d49c7354a5b8a95 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e737c0cf7b25e429c74f22bc35169d770fd914e3 | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a61e0e7b0eca6702905f2bf092f2fda0dc7d5308 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/937969677a707d04b7cb84378194b3c80613c465 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6a93fde13ab42715752ddeec12d31cd1257dced4 | ORPH arm | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9109d8a6dfb0f79188c63d05e684b7d6ba14af54 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1051e9683ed327db1ffc4054ab4593c4f1998be1 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/677d7e1bf02006d4559e3f6320615828ad8344ce | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/af8e0c0e878dce0e37b19821871200f8bea7f390 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/31b56ab5789551e29f217b09a969b597650f0af2 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/41d560caf65b049a076c59ac3fa81dfb40acba04 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/dafefedb7bd73025fd0e7e3bfa3bcaee4fef4c03 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e8ac6c0210cf7e367f67d89992c8003a1cebb0bd | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a44ba737dba79064098326e7a18790d99b69dfe3 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/95f7c354f530e8e7629e012330be57553b10f725 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/970dd5b1509f89914597b4b516df46ead9e18eea | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/32143d94241025d5def9f2120609f941ddac11c9 | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0955943d4c4e0c298484da13f22e6e7511302768 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fac211c158f3460427c6366ab788474d53ebac94 | ORPH aarch64 | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/6a8e5b4eb2f0fe6f6ed5f08774006a1c25a823e5 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/f788035e0748c06cf46671d200b19dc0e3d9e0af | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0c0c165fb073235ba0d711cbc7115d3d034d8d34 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/385923d51ba704f44afb3b74a9df7ea79b0ea36a | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9b134dab0c09ebba516f2a27da42a887aa87016a | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8543720b3da981ddd57f855251fbff2534f6bdd5 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5058089923f4bbed11f1d6a8a21f72981b0baaf7 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cc06ddf8c4387fdbd5390d09263c88655a496c61 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9b245bc9e999f16ec50af7dddd399493a7e29d62 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d07cebae2d5b0354e691c686dfcdfa7222ce1f97 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/ebf1e6d4a6e335b347100d59dae717b7c48e3835 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/eec65adda926aa9dca86319fc348a5d73db5483d | ORPH powerpc64le | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/226d3826c4d845dccb1092da88d2882db98b009b | aarch64_be | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/2d81499251623a55878167d64383c6f610514d53 | xtensa | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/bfe3b131934fd2a3ca88ef75ed1fadfbd426713a | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0348066e22012a229c94ae703cab8a8c631b1225 | aarch64_be | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/a3c57997f4bc2675a40980ee7207949e7d59a57a | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/874cf2f0927325df1d08e96bc4ee1e837ff579ae | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/09cc99aca93dc4e83db1db5aefdc0ddadd4d79a9 | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/288634c00e8338224206e37bbc59a9b009c4482e | arc | unknown | NOK | http://autobuild.buildroot.net/results/c8cdc22a6f05b8e2bd26a0352c6b7553e0dd05a0 | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/f0fbd99bbc12f1d229dccf43bec4cdb581c1e1c1 | ORPH or1k | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/b1fe1e4a8e6c98d76f5d8ec4de7e50dee34b5511 | microblazeel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/f9ac0a5cb43fef9578154aca5ea91eb8a3964d28 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/607596d4ec68af11786b43ea1074dbc62e347bd8 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/31880dd0cfa331c5652b64c86c7ba5823b2afe47 | Classification of failures by reason for 2022.02.x -------------------------------------------------- host-go-1.17.13 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | host-go-1.17.13 | NOK | http://autobuild.buildroot.net/results/69455bf4f986a45ae55175adfb20d29e13a8555e | Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 dropbear-2022.82 | 1 frr-8.2.2 | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-gcc-final-11.3.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-go-1.18.6 | 1 linux-5.17.15 | 1 perl-5.34.1 | 1 tealdeer-1.5.0 | 1 unknown | 1 xvisor-0.3.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/8d7bebb9c1c483d137c9c9c82d1ecccbf0257773 | arc | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/792fa0e37d020806baaadf76bac8c138b115938b | nios2 | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/e147a37feec830966bcdad0cdade270a3a5ff0b6 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a1211339484e092d9e3c83f45128c7411ad7add3 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/f9f73d9da7709f16c674460fe6880b5f392725cc | ORPH powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/826d262ac23863c8452b0ba6713a2c57fb9fade5 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/87b6081af9cb348385e74bef9fa04a9ee2c209e4 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/75ba643f56afabf1c9b419438855d231f1e5dcab | mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/898ea46c022be026b43214e77e91f560a4317918 | ORPH aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ba9ec4a3ad2847c97098c7c4f1ea188774520934 | mips | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/591136f6547f29e842a23d95f257deae6d3a5742 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/7e11b8615cbf01c79ec31bb0662f4b7d1e02d650 | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/22aedcd4bddd0ef9f9275107e7af2c37ce2fe212 | Gitlab CI results for 2022-10-10 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422047 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422048 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422049 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422051 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422055 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422056 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422104 | ORPH ...c440fpMuslBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422662 | ORPH ...86i686MuslBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422826 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422836 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422841 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422111 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422113 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422115 | ORPH ...InitSystemBusyboxRoNet | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422080 | ORPH TestLuaLuaGD | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422144 | ORPH TestOci | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422073 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422444 | ORPH -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Tue Oct 11 06:26:47 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Tue, 11 Oct 2022 08:26:47 +0200 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture Message-ID: <20221011062647.741292-1-marcus.folkesson@gmail.com> libarchive is needed when building for s390x. Introduced in this patch: c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case Fixes: http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ Signed-off-by: Marcus Folkesson --- package/libostree/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libostree/Config.in b/package/libostree/Config.in index 14ae4da4c8..a36e12ddde 100644 --- a/package/libostree/Config.in +++ b/package/libostree/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() depends on !BR2_TOOLCHAIN_USES_MUSL select BR2_PACKAGE_E2FSPROGS + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBGPG_ERROR select BR2_PACKAGE_LIBGPGME -- 2.37.1 From nunes.erico at gmail.com Tue Oct 11 08:49:46 2022 From: nunes.erico at gmail.com (Erico Nunes) Date: Tue, 11 Oct 2022 10:49:46 +0200 Subject: [Buildroot] [PATCH] package/efivar: fix build with musl libc Message-ID: <20221011084946.2276735-1-nunes.erico@gmail.com> Backport upstream patch to fix build with musl libc. This patch is only a requirement since efivar 38 and was applied upstream shortly after the 38 version tag. Fixes: http://autobuild.buildroot.net/results/c49d894b109d68e2624074eab8b939fefa3b42ef/ Signed-off-by: Erico Nunes --- ...04-efisecdb-fix-build-with-musl-libc.patch | 185 ++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100644 package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch diff --git a/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch b/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch new file mode 100644 index 0000000000..9815a9d0cf --- /dev/null +++ b/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch @@ -0,0 +1,185 @@ +From cece3ffd5be2f8641eb694513f2b73e5eb97ffd3 Mon Sep 17 00:00:00 2001 +From: Natanael Copa +Date: Fri, 28 Jan 2022 12:13:30 +0100 +Subject: [PATCH] efisecdb: fix build with musl libc + +Refactor code to use POSIX atexit(3) instead of the GNU specific +on_exit(3). + +Resolves: #197 +Resolves: #202 +Signed-off-by: Natanael Copa +[Erico: backport from upstream commit +cece3ffd5be2f8641eb694513f2b73e5eb97ffd3] +Signed-off-by: Erico Nunes +--- + src/compiler.h | 2 -- + src/efisecdb.c | 68 +++++++++++++++++++------------------------------- + 2 files changed, 26 insertions(+), 44 deletions(-) + +diff --git a/src/compiler.h b/src/compiler.h +index e2f18f0..d95fb01 100644 +--- a/src/compiler.h ++++ b/src/compiler.h +@@ -7,8 +7,6 @@ + #ifndef COMPILER_H_ + #define COMPILER_H_ + +-#include +- + /* GCC version checking borrowed from glibc. */ + #if defined(__GNUC__) && defined(__GNUC_MINOR__) + # define GNUC_PREREQ(maj,min) \ +diff --git a/src/efisecdb.c b/src/efisecdb.c +index f882373..6bd5ad9 100644 +--- a/src/efisecdb.c ++++ b/src/efisecdb.c +@@ -25,6 +25,10 @@ + extern char *optarg; + extern int optind, opterr, optopt; + ++static efi_secdb_t *secdb = NULL; ++static list_t infiles; ++static list_t actions; ++ + struct hash_param { + char *name; + efi_secdb_type_t algorithm; +@@ -187,12 +191,11 @@ add_action(list_t *list, action_type_t action_type, const efi_guid_t *owner, + } + + static void +-free_actions(int status UNUSED, void *actionsp) ++free_actions(void) + { +- list_t *actions = (list_t *)actionsp; + list_t *pos, *tmp; + +- for_each_action_safe(pos, tmp, actions) { ++ for_each_action_safe(pos, tmp, &actions) { + action_t *action = list_entry(pos, action_t, list); + + list_del(&action->list); +@@ -202,12 +205,11 @@ free_actions(int status UNUSED, void *actionsp) + } + + static void +-free_infiles(int status UNUSED, void *infilesp) ++free_infiles(void) + { +- list_t *infiles = (list_t *)infilesp; + list_t *pos, *tmp; + +- for_each_ptr_safe(pos, tmp, infiles) { ++ for_each_ptr_safe(pos, tmp, &infiles) { + ptrlist_t *entry = list_entry(pos, ptrlist_t, list); + + list_del(&entry->list); +@@ -216,27 +218,12 @@ free_infiles(int status UNUSED, void *infilesp) + } + + static void +-maybe_free_secdb(int status UNUSED, void *voidp) ++maybe_free_secdb(void) + { +- efi_secdb_t **secdbp = (efi_secdb_t **)voidp; +- +- if (secdbp == NULL || *secdbp == NULL) ++ if (secdb == NULL) + return; + +- efi_secdb_free(*secdbp); +-} +- +-static void +-maybe_do_unlink(int status, void *filep) +-{ +- char **file = (char **)filep; +- +- if (status == 0) +- return; +- if (file == NULL || *file == NULL) +- return; +- +- unlink(*file); ++ efi_secdb_free(secdb); + } + + static void +@@ -323,15 +310,6 @@ parse_input_files(list_t *infiles, char **outfile, efi_secdb_t **secdb, + return status; + } + +-/* +- * These need to be static globals so that they're not on main's stack when +- * on_exit() fires. +- */ +-static efi_secdb_t *secdb = NULL; +-static list_t infiles; +-static list_t actions; +-static char *outfile = NULL; +- + int + main(int argc, char *argv[]) + { +@@ -351,6 +329,7 @@ main(int argc, char *argv[]) + bool do_sort_data = false; + bool sort_descending = false; + int status = 0; ++ char *outfile = NULL; + + const char sopts[] = ":aAc:dfg:h:i:Lo:rs:t:v?"; + const struct option lopts[] = { +@@ -376,10 +355,9 @@ main(int argc, char *argv[]) + INIT_LIST_HEAD(&infiles); + INIT_LIST_HEAD(&actions); + +- on_exit(free_actions, &actions); +- on_exit(free_infiles, &infiles); +- on_exit(maybe_free_secdb, &secdb); +- on_exit(maybe_do_unlink, &outfile); ++ atexit(free_actions); ++ atexit(free_infiles); ++ atexit(maybe_free_secdb); + + /* + * parse the command line. +@@ -587,24 +565,30 @@ sort_err: + outfd = open(outfile, flags, 0600); + if (outfd < 0) { + char *tmpoutfile = outfile; +- if (errno == EEXIST) +- outfile = NULL; ++ if (errno != EEXIST) ++ unlink(outfile); + err(1, "could not open \"%s\"", tmpoutfile); + } + + rc = ftruncate(outfd, 0); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + err(1, "could not truncate output file \"%s\"", outfile); ++ } + + void *output; + size_t size = 0; + rc = efi_secdb_realize(secdb, &output, &size); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + secdb_err(1, "could not realize signature list"); ++ } + + rc = write(outfd, output, size); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + err(1, "could not write signature list"); ++ } + + close(outfd); + xfree(output); +-- +2.37.3 + -- 2.37.3 From leo at yuriev.ru Tue Oct 11 11:11:10 2022 From: leo at yuriev.ru (Leonid Yuriev) Date: Tue, 11 Oct 2022 14:11:10 +0300 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-10 In-Reply-To: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> References: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> Message-ID: <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> Hi, Please fix the configuration error of toolchain for microblaze arch. I already wrote about this problem at the beginning of the summer, and then changed the diagnostic message to make the error more obvious. Basically, the failed assertion (see below) checks that the width of l_start end l_len fields of the struct flock are enough to hold values of off_t type. So, the libc in the toolchain is misconfigured or/and has wrong layout of headers, etc. In file included from /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:181: /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c: In function 'lck_op': /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:818:38: error: static assertion failed: "Support for large/64-bit-sized files is misconfigured for the target system and/or toolchain. Please fix it or at least disable it completely." ? 818 | #define STATIC_ASSERT_MSG(expr, msg) static_assert(expr, msg) ????? |????????????????????????????????????? ^~~~~~~~~~~~~ /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:30482:5: note: in expansion of macro 'STATIC_ASSERT_MSG' 30482 |???? STATIC_ASSERT_MSG(sizeof(off_t) <= sizeof(lock_op.l_start) && ????? |???? ^~~~~~~~~~~~~~~~~ Regards. Leonid. 11.10.2022 08:45, Thomas Petazzoni ?????: > Hello, > > Autobuilder failures > ==================== > > Below is a list of build failures reported by the Buildroot autobuilders > in relation to packages or CPU architectures you are in charge of. > Please help us improving the quality of Buildroot by investigating those > build failures and sending patches to fix them. > > Results for the 'master' branch > ------------------------------- > > Build failures related to your packages: > > arch | reason | url > -------------+--------------------------------+--------------------------------------------------------------------------------- > microblaze | libmdbx-0.11.11 | http://autobuild.buildroot.net/results/7259eb7ef9eae5702eb17ec228f4312c534981a7 > > > Thanks for your contribution to Buildroot! > From baruch at tkos.co.il Tue Oct 11 14:02:10 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:10 +0300 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> The Armada target does not provide platform level support for SSP. Fixes link failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' This error does not should up on CI jobs because SSP was effectively always disabled until the previous commit. Signed-off-by: Baruch Siach --- configs/solidrun_clearfog_gt_8k_defconfig | 1 + configs/solidrun_macchiatobin_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/solidrun_clearfog_gt_8k_defconfig b/configs/solidrun_clearfog_gt_8k_defconfig index bec4a7daccc6..30b1e17925d6 100644 --- a/configs/solidrun_clearfog_gt_8k_defconfig +++ b/configs/solidrun_clearfog_gt_8k_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y diff --git a/configs/solidrun_macchiatobin_defconfig b/configs/solidrun_macchiatobin_defconfig index 7d06313b03db..f388e37163aa 100644 --- a/configs/solidrun_macchiatobin_defconfig +++ b/configs/solidrun_macchiatobin_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y -- 2.35.1 From baruch at tkos.co.il Tue Oct 11 14:02:11 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:11 +0300 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: Add a patch to disable SSP. The toolchain enables SSP by default when one of BR2_SSP_ options is enabled. But ATF code for the Marvell platform does not provide the required low level routines. This leads to link time failure. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 Signed-off-by: Baruch Siach --- ...01-Makefile-disable-stack-protection.patch | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch diff --git a/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch new file mode 100644 index 000000000000..62b1000727f8 --- /dev/null +++ b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch @@ -0,0 +1,34 @@ +From 53e34e3bff26fcbb7cc14178fa9fc80e7a73d556 Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 11 Oct 2022 16:34:44 +0300 +Subject: [PATCH] Makefile: disable stack protection + +The Buildroot toolchain might enable stack protection by default. That +breaks linking because ATF does not provide the required __stack_chk +routines. + +The mv-ddr-marvell Makefile provides no way to add custom CFLAGS. Patch +Makefile to disable stack protection. + +Signed-off-by: Baruch Siach +--- +Upstream status: not applicable; Buildroot specific +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index 3f0dd89a7381..feae75cc16e4 100644 +--- a/Makefile ++++ b/Makefile +@@ -331,6 +331,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT) + CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4 + CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc + CFLAGS += -march=armv8-a -fpie ++CFLAGS += -fno-stack-protector + + # PLATFORM is set in ble/ble.mk + ifneq ($(findstring a80x0,$(PLATFORM)),) +-- +2.35.1 + -- 2.35.1 From baruch at tkos.co.il Tue Oct 11 14:02:09 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:09 +0300 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support Message-ID: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is set to 0 unconditionally in make_helpers/defaults.mk, overwriting any environment set value. So we must pass ENABLE_STACK_PROTECTOR in MAKE_OPTS for it to be effective. But to avoid said build failure we can't pass ENABLE_STACK_PROTECTOR=0. Only pass ENABLE_STACK_PROTECTOR when BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. Cc: Dick Olsson Cc: Sergey Matyukevich Signed-off-by: Baruch Siach --- boot/arm-trusted-firmware/Config.in | 4 ---- boot/arm-trusted-firmware/arm-trusted-firmware.mk | 8 ++++++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index aa571502b345..5070849d9b43 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -226,10 +226,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL string - # While newer versions of TF-A support "none" as - # ENABLE_STACK_PROTECTOR value, older versions (e.g 2.0) only - # supported "0" to disable SSP. - default "0" if !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP default "default" if BR2_SSP_REGULAR default "strong" if BR2_SSP_STRONG default "all" if BR2_SSP_ALL diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 246c0699bb4a..34d7d80243d4 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -64,10 +64,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM) \ TARGET_BOARD=$(ARM_TRUSTED_FIRMWARE_TARGET_BOARD) +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ + ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) +endif + ARM_TRUSTED_FIRMWARE_MAKE_ENV += \ $(TARGET_MAKE_ENV) \ - $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") \ - ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) + $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") ifeq ($(BR2_ARM_CPU_ARMV7A),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ARM_ARCH_MAJOR=7 -- 2.35.1 From peter at korsgaard.com Tue Oct 11 18:43:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:43:37 +0200 Subject: [Buildroot] [git commit] package/nodejs: renumber patch 0001 to 0002 In-Reply-To: <20220925082044.312FD85FCB@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:18:48 +0200") References: <20220925082044.312FD85FCB@busybox.osuosl.org> Message-ID: <87sfjup5eu.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=f85e2cfc6e587d50b86f49b28469eae58a2ea2c7 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > There is already another 0001 patch. > Signed-off-by: Thomas Petazzoni Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:45:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:45:47 +0200 Subject: [Buildroot] [git commit] package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error In-Reply-To: <20220925082044.3B03185FCC@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:18:48 +0200") References: <20220925082044.3B03185FCC@busybox.osuosl.org> Message-ID: <87o7uip5b8.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Reported also via: > https://github.com/nodejs/node/issues/37441 > Patched in: > https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d > The error is: > ``` > ninja: Entering directory `out/Release' > ninja: error: obj.host/tools/v8_gypfiles/run_torque.ninja:1356: multiple rules generate gen/torque-generated/bit-fields.h [-w dupbuild=err] > make[2]: *** [Makefile:127: node] Error 1 > make[1]: *** [package/pkg-generic.mk:293: /output/build/nodejs-16.15.0/.stamp_built] Error 2 > make: *** [Makefile:84: _all] Error 2 > ``` > Fixes: > http://autobuild.buildroot.net/results/7fe9132236ee8e3a86dd97fe96ffee42990c2d19/ > Signed-off-by: Alexandru Ardelean > [Thomas: > - regenerate patch as a git formatted patch, add a link to the > original location, add my own SoB to it > - improve commit log] > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:48:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:48:04 +0200 Subject: [Buildroot] [git commit] package/nodejs: don't install nodejs host-tools In-Reply-To: <20220925082044.4E0E885FCE@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:38 +0200") References: <20220925082044.4E0E885FCE@busybox.osuosl.org> Message-ID: <87k056p57f.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=ec5589611ad79664bc5bf238cc786a65458f3c93 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > The target nodejs package is building those tools, and running them > under Qemu, so it is not necessary for the host variant to install > them. > Signed-off-by: Alexandru Ardelean > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:48:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:48:13 +0200 Subject: [Buildroot] [git commit] package/nodejs: improve 0001-add-qemu-wrapper-support.patch to fix build issue In-Reply-To: <20220925082044.445AB85FCD@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:12 +0200") References: <20220925082044.445AB85FCD@busybox.osuosl.org> Message-ID: <87fsfup576.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=cf0ddc89705af989393b1601bbf57d567a9a1b13 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since upstream commit 79da2534737bd090b7000beed68d225618606e53, > present since NodeJS 16.0.0, another call to the torque tool is done > in tools/v8_gypfiles/v8.gyp, but our patch to wrap calls to such tools > under Qemu forgot this addition. Due to this, the build of NodeJS is > broken since the bump to v16 in Buildroot commit > 07408779cc068041a2da6838fe077d1a679f1736 ("package/nodejs: bump to > 16.15.0"). This issue is not visible in the autobuilders as it was > hidden by a previous build issue, itself fixed by "package/nodejs: fix > 'Duplicate v8 target errors when cross-compiling' error". > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:34:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:34:23 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/nodejs: renumber patch 0001 to 0002 Message-ID: <20221011184828.AB2B486B93@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0172690bcd7213624b639c5d7f6e1faeb7c76bbc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x There is already another 0001 patch. Signed-off-by: Thomas Petazzoni (cherry picked from commit f85e2cfc6e587d50b86f49b28469eae58a2ea2c7) Signed-off-by: Peter Korsgaard --- ...ace-support.patch => 0002-check-if-uclibc-has-backtrace-support.patch} | 0 1 file changed, 0 insertions(+), 0 deletions(-) diff --git a/package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch similarity index 100% rename from package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch rename to package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch From peter at korsgaard.com Tue Oct 11 18:53:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:23 +0200 Subject: [Buildroot] [git commit] package/nodejs: build host-nodejs only if we're installing modules with NPM In-Reply-To: <20220925082044.5702885FCF@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:49 +0200") References: <20220925082044.5702885FCF@busybox.osuosl.org> Message-ID: <87bkqip4yk.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=1facb09b94bf806b301868539185c0ff9ddffee2 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Building host-nodejs is no longer needed to build the target nodejs, > unless npm is needed during the build, which happens when > BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL is used. > We need to make that host-python3 is built with bz2 and ssl > support. Until now, it was done by the BR2_PACKAGE_HOST_NODEJS option, > but now that the target nodejs no longer depends on host-nodejs, we > are no longer guaranteed to have a host-python3 with bz2/ssl. To make > sure it is the case, we select the relevant options from > BR2_PACKAGE_NODEJS. > Signed-off-by: Alexandru Ardelean > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:53:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:46 +0200 Subject: [Buildroot] [PATCH 1/4] package/nodejs: fixup qemu dependencies In-Reply-To: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 19:19:29 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> Message-ID: <877d16p4xx.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > Commit 1facb09b94bf806b301868539185c0ff9ddffee2 ("package/nodejs: > build host-nodejs only if we're installing modules with NPM") forgot > to account for the dependency on Qemu. Now that nodejs no longer > depends on host-nodejs, but needs host-qemu, we need to make sure that > nodejs selects the relevant BR2_PACKAGE_HOST_QEMU options. > So this patch: > - Drops the dependency of BR2_PACKAGE_NODEJS_ARCH_SUPPORTS on > BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET, which was incorrect: we > don't care about running Qemu on the target. We care about > host-qemu supporting the emulation of the target architecture, > which is what BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS is for. > - Adds the dependency to the relevant BR2_PACKAGE_HOST_QEMU options > to BR2_PACKAGE_NODEJS, so that host-qemu is built with the > appropriate features needed to build the target nodejs. > - Removes the qemu related dependencies from host-nodejs, which does > not need Qemu at all. > Without this change the build of nodejs without npm enabled is broken > as the host-qemu that gets built does not have all the features that > are needed. There are no autobuild failures at this point, however. > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:18:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:18:41 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: don't install nodejs host-tools Message-ID: <20221011185356.57D8386BD3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a0771a6b36aeb6f4d9d3b4d7d13377e47728c9b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x The target nodejs package is building those tools, and running them under Qemu, so it is not necessary for the host variant to install them. Signed-off-by: Alexandru Ardelean Signed-off-by: Thomas Petazzoni (cherry picked from commit ec5589611ad79664bc5bf238cc786a65458f3c93) Signed-off-by: Peter Korsgaard --- package/nodejs/nodejs.mk | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 3154dcd7ec..92a9493e25 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -102,13 +102,6 @@ define HOST_NODEJS_CONFIGURE_CMDS --ninja endef -NODEJS_HOST_TOOLS_V8 = \ - torque \ - gen-regexp-special-case \ - bytecode_builtins_list_generator -NODEJS_HOST_TOOLS_NODE = mkcodecache -NODEJS_HOST_TOOLS = $(NODEJS_HOST_TOOLS_V8) $(NODEJS_HOST_TOOLS_NODE) - HOST_NODEJS_CXXFLAGS = $(HOST_CXXFLAGS) define HOST_NODEJS_BUILD_CMDS @@ -121,10 +114,6 @@ define HOST_NODEJS_INSTALL_CMDS $(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \ $(MAKE) -C $(@D) install \ $(HOST_NODEJS_MAKE_OPTS) - - $(foreach f,$(NODEJS_HOST_TOOLS), \ - $(INSTALL) -m755 -D $(@D)/out/Release/$(f) $(HOST_DIR)/bin/$(f) - ) endef ifeq ($(BR2_i386),y) From peter at korsgaard.com Tue Oct 11 18:15:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:15:36 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error Message-ID: <20221011185356.4320D86BD1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a712b5f61b54a72d5bdc4076a85f76011fd8a50f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Reported also via: https://github.com/nodejs/node/issues/37441 Patched in: https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d The error is: ``` ninja: Entering directory `out/Release' ninja: error: obj.host/tools/v8_gypfiles/run_torque.ninja:1356: multiple rules generate gen/torque-generated/bit-fields.h [-w dupbuild=err] make[2]: *** [Makefile:127: node] Error 1 make[1]: *** [package/pkg-generic.mk:293: /output/build/nodejs-16.15.0/.stamp_built] Error 2 make: *** [Makefile:84: _all] Error 2 ``` Fixes: http://autobuild.buildroot.net/results/7fe9132236ee8e3a86dd97fe96ffee42990c2d19/ Signed-off-by: Alexandru Ardelean [Thomas: - regenerate patch as a git formatted patch, add a link to the original location, add my own SoB to it - improve commit log] Signed-off-by: Thomas Petazzoni (cherry picked from commit 5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7) Signed-off-by: Peter Korsgaard --- ...3-include-obj-name-in-shared-intermediate.patch | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch new file mode 100644 index 0000000000..b439c66a0c --- /dev/null +++ b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch @@ -0,0 +1,42 @@ +From e6e691d093de440e0f408d48971e2b7332a07d58 Mon Sep 17 00:00:00 2001 +From: Min RK +Date: Fri, 19 Feb 2021 11:57:04 +0100 +Subject: [PATCH] include obj name in shared intermediate + +avoids duplicate ninja rules for v8 used in host and target + +From: https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d +Signed-off-by: Thomas Petazzoni +--- + tools/gyp/pylib/gyp/generator/ninja.py | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +diff --git a/tools/gyp/pylib/gyp/generator/ninja.py b/tools/gyp/pylib/gyp/generator/ninja.py +index d173bf2299..efaeee53ef 100644 +--- a/tools/gyp/pylib/gyp/generator/ninja.py ++++ b/tools/gyp/pylib/gyp/generator/ninja.py +@@ -42,7 +42,7 @@ generator_default_variables = { + # the start of a string, while $| is used for variables that can appear + # anywhere in a string. + "INTERMEDIATE_DIR": "$!INTERMEDIATE_DIR", +- "SHARED_INTERMEDIATE_DIR": "$!PRODUCT_DIR/gen", ++ "SHARED_INTERMEDIATE_DIR": "$!PRODUCT_DIR/$|OBJ/gen", + "PRODUCT_DIR": "$!PRODUCT_DIR", + "CONFIGURATION_NAME": "$|CONFIGURATION_NAME", + # Special variables that may be used by gyp 'rule' targets. +@@ -285,6 +285,12 @@ class NinjaWriter: + CONFIGURATION_NAME = "$|CONFIGURATION_NAME" + path = path.replace(CONFIGURATION_NAME, self.config_name) + ++ obj = "obj" ++ if self.toolset != "target": ++ obj += "." + self.toolset ++ ++ path = path.replace("$|OBJ", obj) ++ + return path + + def ExpandRuleVariables(self, path, root, dirname, source, ext, name): +-- +2.37.3 + From peter at korsgaard.com Tue Oct 11 18:11:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:11:52 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: renumber patch 0001 to 0002 Message-ID: <20221011185356.392AE86BCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b0700755ae1d564581f6e224dca6f9dc1c0a496c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x There is already another 0001 patch. Signed-off-by: Thomas Petazzoni (cherry picked from commit f85e2cfc6e587d50b86f49b28469eae58a2ea2c7) Signed-off-by: Peter Korsgaard --- ...ace-support.patch => 0002-check-if-uclibc-has-backtrace-support.patch} | 0 1 file changed, 0 insertions(+), 0 deletions(-) diff --git a/package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch similarity index 100% rename from package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch rename to package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch From peter at korsgaard.com Tue Oct 11 18:15:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:15:49 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: improve 0001-add-qemu-wrapper-support.patch to fix build issue Message-ID: <20221011185356.4D83286BD2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3a3521a38060070b25f5e1af849d8c2a76c4c512 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since upstream commit 79da2534737bd090b7000beed68d225618606e53, present since NodeJS 16.0.0, another call to the torque tool is done in tools/v8_gypfiles/v8.gyp, but our patch to wrap calls to such tools under Qemu forgot this addition. Due to this, the build of NodeJS is broken since the bump to v16 in Buildroot commit 07408779cc068041a2da6838fe077d1a679f1736 ("package/nodejs: bump to 16.15.0"). This issue is not visible in the autobuilders as it was hidden by a previous build issue, itself fixed by "package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error". Signed-off-by: Thomas Petazzoni (cherry picked from commit cf0ddc89705af989393b1601bbf57d567a9a1b13) Signed-off-by: Peter Korsgaard --- package/nodejs/0001-add-qemu-wrapper-support.patch | 37 ++++++++++++++-------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/package/nodejs/0001-add-qemu-wrapper-support.patch b/package/nodejs/0001-add-qemu-wrapper-support.patch index 1368ca5a38..8d09601158 100644 --- a/package/nodejs/0001-add-qemu-wrapper-support.patch +++ b/package/nodejs/0001-add-qemu-wrapper-support.patch @@ -1,4 +1,4 @@ -From fa09fa3ad6a21ae0b35fb860f76d1762e5f29972 Mon Sep 17 00:00:00 2001 +From c6103ceab64b73c1a25ece3315ea8f52507c2bfe Mon Sep 17 00:00:00 2001 From: Adam Duskett Date: Mon, 27 Sep 2021 12:55:09 -0700 Subject: [PATCH] add qemu-wrapper support @@ -17,15 +17,15 @@ host-builds. Signed-off-by: Adam Duskett --- - node.gyp | 4 ++-- - tools/v8_gypfiles/v8.gyp | 8 ++++---- - 2 files changed, 6 insertions(+), 6 deletions(-) + node.gyp | 4 ++-- + tools/v8_gypfiles/v8.gyp | 10 +++++----- + 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/node.gyp b/node.gyp -index 8ba0dfeb..c77f6f7d 100644 +index 74e9f9cc2e..c3eaab6c92 100644 --- a/node.gyp +++ b/node.gyp -@@ -491,7 +491,7 @@ +@@ -295,7 +295,7 @@ 'action_name': 'run_mkcodecache', 'process_outputs_as_sources': 1, 'inputs': [ @@ -34,7 +34,7 @@ index 8ba0dfeb..c77f6f7d 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_code_cache.cc', -@@ -516,7 +516,7 @@ +@@ -320,7 +320,7 @@ 'action_name': 'node_mksnapshot', 'process_outputs_as_sources': 1, 'inputs': [ @@ -44,10 +44,10 @@ index 8ba0dfeb..c77f6f7d 100644 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_snapshot.cc', diff --git a/tools/v8_gypfiles/v8.gyp b/tools/v8_gypfiles/v8.gyp -index 48ec392b..f9bb0fbe 100644 +index 39b96803c7..9321982ea4 100644 --- a/tools/v8_gypfiles/v8.gyp +++ b/tools/v8_gypfiles/v8.gyp -@@ -220,7 +220,7 @@ +@@ -68,7 +68,7 @@ { 'action_name': 'run_torque_action', 'inputs': [ # Order matters. @@ -56,7 +56,16 @@ index 48ec392b..f9bb0fbe 100644 '<@(torque_files)', ], 'outputs': [ -@@ -351,7 +351,7 @@ +@@ -99,7 +99,7 @@ + '<@(torque_outputs_inc)', + ], + 'action': [ +- '<(PRODUCT_DIR)/<(EXECUTABLE_PREFIX)torque<(EXECUTABLE_SUFFIX)', ++ @MAYBE_WRAPPER@ '<(PRODUCT_DIR)/<(EXECUTABLE_PREFIX)torque<(EXECUTABLE_SUFFIX)', + '-o', '<(SHARED_INTERMEDIATE_DIR)/torque-generated', + '-v8-root', '<(V8_ROOT)', + '<@(torque_files_without_v8_root)', +@@ -211,7 +211,7 @@ { 'action_name': 'generate_bytecode_builtins_list_action', 'inputs': [ @@ -65,7 +74,7 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(generate_bytecode_builtins_list_output)', -@@ -533,7 +533,7 @@ +@@ -395,7 +395,7 @@ ], }, 'inputs': [ @@ -74,7 +83,7 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(INTERMEDIATE_DIR)/snapshot.cc', -@@ -1448,7 +1448,7 @@ +@@ -1503,7 +1503,7 @@ { 'action_name': 'run_gen-regexp-special-case_action', 'inputs': [ @@ -83,6 +92,6 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/src/regexp/special-case.cc', --- -2.31.1 +-- +2.37.3 From peter at korsgaard.com Tue Oct 11 18:53:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:10 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: fixup qemu dependencies Message-ID: <20221011185356.6D78086BCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=72c6d2f54acc60d597b602d8dd3d650fc49848ba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Commit 1facb09b94bf806b301868539185c0ff9ddffee2 ("package/nodejs: build host-nodejs only if we're installing modules with NPM") forgot to account for the dependency on Qemu. Now that nodejs no longer depends on host-nodejs, but needs host-qemu, we need to make sure that nodejs selects the relevant BR2_PACKAGE_HOST_QEMU options. So this patch: - Drops the dependency of BR2_PACKAGE_NODEJS_ARCH_SUPPORTS on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET, which was incorrect: we don't care about running Qemu on the target. We care about host-qemu supporting the emulation of the target architecture, which is what BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS is for. - Adds the dependency to the relevant BR2_PACKAGE_HOST_QEMU options to BR2_PACKAGE_NODEJS, so that host-qemu is built with the appropriate features needed to build the target nodejs. - Removes the qemu related dependencies from host-nodejs, which does not need Qemu at all. Without this change the build of nodejs without npm enabled is broken as the host-qemu that gets built does not have all the features that are needed. There are no autobuild failures at this point, however. Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit a88ba1548a50d5599e0156d66063dd71545f910b) Signed-off-by: Peter Korsgaard --- package/nodejs/Config.in | 4 +++- package/nodejs/Config.in.host | 4 ---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 8d0bd8fd60..5375dfeacd 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -6,7 +6,7 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 - depends on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET + depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS comment "nodejs needs a toolchain w/ C++, dynamic library, NPTL, gcc >= 7, wchar, host gcc >= 8" depends on BR2_USE_MMU @@ -31,6 +31,8 @@ config BR2_PACKAGE_NODEJS select BR2_PACKAGE_HOST_PYTHON3 select BR2_PACKAGE_HOST_PYTHON3_BZIP2 select BR2_PACKAGE_HOST_PYTHON3_SSL + select BR2_PACKAGE_HOST_QEMU + select BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE select BR2_PACKAGE_C_ARES select BR2_PACKAGE_LIBUV select BR2_PACKAGE_ZLIB diff --git a/package/nodejs/Config.in.host b/package/nodejs/Config.in.host index 4ceaf0c73e..f7f2b80a9b 100644 --- a/package/nodejs/Config.in.host +++ b/package/nodejs/Config.in.host @@ -1,12 +1,9 @@ config BR2_PACKAGE_HOST_NODEJS bool "host nodejs" - depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS depends on BR2_HOST_GCC_AT_LEAST_8 select BR2_PACKAGE_HOST_PYTHON3 select BR2_PACKAGE_HOST_PYTHON3_BZIP2 select BR2_PACKAGE_HOST_PYTHON3_SSL - select BR2_PACKAGE_HOST_QEMU - select BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE help Event-driven I/O server-side JavaScript environment based on V8. @@ -14,5 +11,4 @@ config BR2_PACKAGE_HOST_NODEJS http://nodejs.org/ comment "host nodejs needs a host gcc >= 8" - depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS depends on !BR2_HOST_GCC_AT_LEAST_8 From peter at korsgaard.com Tue Oct 11 18:18:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:18:58 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: build host-nodejs only if we're installing modules with NPM Message-ID: <20221011185356.6315186BD4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b2c7ad1fc25ddf430ddf38aa75039bf7b211ab4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Building host-nodejs is no longer needed to build the target nodejs, unless npm is needed during the build, which happens when BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL is used. We need to make that host-python3 is built with bz2 and ssl support. Until now, it was done by the BR2_PACKAGE_HOST_NODEJS option, but now that the target nodejs no longer depends on host-nodejs, we are no longer guaranteed to have a host-python3 with bz2/ssl. To make sure it is the case, we select the relevant options from BR2_PACKAGE_NODEJS. Signed-off-by: Alexandru Ardelean Signed-off-by: Thomas Petazzoni (cherry picked from commit 1facb09b94bf806b301868539185c0ff9ddffee2) Signed-off-by: Peter Korsgaard --- package/nodejs/Config.in | 5 ++++- package/nodejs/nodejs.mk | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 016aeb4e1a..8d0bd8fd60 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -27,7 +27,10 @@ config BR2_PACKAGE_NODEJS # uses dlopen(). On ARMv5, we could technically support static # linking, but that's too much of a corner case to support it. depends on !BR2_STATIC_LIBS - select BR2_PACKAGE_HOST_NODEJS + select BR2_PACKAGE_HOST_NODEJS if BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL != "" + select BR2_PACKAGE_HOST_PYTHON3 + select BR2_PACKAGE_HOST_PYTHON3_BZIP2 + select BR2_PACKAGE_HOST_PYTHON3_SSL select BR2_PACKAGE_C_ARES select BR2_PACKAGE_LIBUV select BR2_PACKAGE_ZLIB diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 92a9493e25..e9fe96812f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -8,7 +8,6 @@ NODEJS_VERSION = 16.16.0 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ - host-nodejs \ host-ninja \ host-pkgconf \ host-python3 \ @@ -240,6 +239,7 @@ NPM = $(TARGET_CONFIGURE_OPTS) \ # We can only call NPM if there's something to install. # ifneq ($(NODEJS_MODULES_LIST),) +NODEJS_DEPENDENCIES += host-nodejs define NODEJS_INSTALL_MODULES # If you're having trouble with module installation, adding -d to the # npm install call below and setting npm_config_rollback=false can both From peter at korsgaard.com Tue Oct 11 19:19:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:19:53 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> (Thomas Petazzoni via buildroot's message of "Sun, 25 Sep 2022 19:19:30 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> Message-ID: <8735bup3qe.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > This is currently the latest version in the v16.x branch. > Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations > to resolve conflicts with other unrelated upstream changes. The other > patches are simply refreshed. > The license file is updates due to: > - Reformatting changes > - Addition of the mention of some files being under GPLv3, but it's > only the autoconf machinery: aclocal.m4 and config.guess, so it's > not relevant to add in our LICENSE variable. > - Addition of the mention of another file being under the MIT > license (install-sh), and MIT is already listed, and this file is > anyway only part of the autoconf machinery. > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 19:23:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:23:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/redis: security bump to v7.0.5 In-Reply-To: <20220926140252.2f775240@windsurf> (Thomas Petazzoni's message of "Mon, 26 Sep 2022 14:02:52 +0200") References: <20220926101724.1989377-1-titouanchristophe@gmail.com> <20220926140252.2f775240@windsurf> Message-ID: <87y1tmnp0k.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > On Mon, 26 Sep 2022 12:17:24 +0200 > Titouan Christophe wrote: >> From the release notes: >> (https://github.com/redis/redis/blob/7.0.5/00-RELEASENOTES) >> >> ================================================================================ >> Redis 7.0.5 Released Wed Sep 21 20:00:00 IST 2022 >> ================================================================================ >> >> Upgrade urgency: SECURITY, contains fixes to security issues. >> >> Security Fixes: >> * (CVE-2022-35951) Executing a XAUTOCLAIM command on a stream key in a specific >> state, with a specially crafted COUNT argument, may cause an integer overflow, >> a subsequent heap overflow, and potentially lead to remote code execution. >> The problem affects Redis versions 7.0.0 or newer >> [reported by Xion (SeungHyun Lee) of KAIST GoN]. >> >> Signed-off-by: Titouan Christophe >> --- >> package/redis/redis.hash | 2 +- >> package/redis/redis.mk | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) > Applied to master, thanks. Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 19:17:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:17:39 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: bump to v16.17.1 Message-ID: <20221011192552.9109086BD8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0c058e99320ef50390144140122d47225499a972 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is currently the latest version in the v16.x branch. Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations to resolve conflicts with other unrelated upstream changes. The other patches are simply refreshed. The license file is updates due to: - Reformatting changes - Addition of the mention of some files being under GPLv3, but it's only the autoconf machinery: aclocal.m4 and config.guess, so it's not relevant to add in our LICENSE variable. - Addition of the mention of another file being under the MIT license (install-sh), and MIT is already listed, and this file is anyway only part of the autoconf machinery. Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit a8a65d0951e4c93fbba8041ce8e7db1ba8809edc) Signed-off-by: Peter Korsgaard --- package/nodejs/0001-add-qemu-wrapper-support.patch | 28 +++++++++++----------- ...002-check-if-uclibc-has-backtrace-support.patch | 6 ++--- ...3-include-obj-name-in-shared-intermediate.patch | 4 ++-- package/nodejs/nodejs.hash | 6 ++--- package/nodejs/nodejs.mk | 2 +- 5 files changed, 23 insertions(+), 23 deletions(-) diff --git a/package/nodejs/0001-add-qemu-wrapper-support.patch b/package/nodejs/0001-add-qemu-wrapper-support.patch index 8d09601158..184f3d19b7 100644 --- a/package/nodejs/0001-add-qemu-wrapper-support.patch +++ b/package/nodejs/0001-add-qemu-wrapper-support.patch @@ -1,4 +1,4 @@ -From c6103ceab64b73c1a25ece3315ea8f52507c2bfe Mon Sep 17 00:00:00 2001 +From 1f6c55d7318e7075169004b4314708f4766ec193 Mon Sep 17 00:00:00 2001 From: Adam Duskett Date: Mon, 27 Sep 2021 12:55:09 -0700 Subject: [PATCH] add qemu-wrapper support @@ -22,10 +22,10 @@ Signed-off-by: Adam Duskett 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/node.gyp b/node.gyp -index 74e9f9cc2e..c3eaab6c92 100644 +index 97cdbb531d..db5cf51ce6 100644 --- a/node.gyp +++ b/node.gyp -@@ -295,7 +295,7 @@ +@@ -319,7 +319,7 @@ 'action_name': 'run_mkcodecache', 'process_outputs_as_sources': 1, 'inputs': [ @@ -34,17 +34,17 @@ index 74e9f9cc2e..c3eaab6c92 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_code_cache.cc', -@@ -320,7 +320,7 @@ - 'action_name': 'node_mksnapshot', - 'process_outputs_as_sources': 1, - 'inputs': [ -- '<(node_mksnapshot_exec)', -+ @MAYBE_WRAPPER@ '<(node_mksnapshot_exec)', - ], - 'outputs': [ - '<(SHARED_INTERMEDIATE_DIR)/node_snapshot.cc', +@@ -346,7 +346,7 @@ + 'action_name': 'node_mksnapshot', + 'process_outputs_as_sources': 1, + 'inputs': [ +- '<(node_mksnapshot_exec)', ++ @MAYBE_WRAPPER@ '<(node_mksnapshot_exec)', + '<(node_snapshot_main)', + ], + 'outputs': [ diff --git a/tools/v8_gypfiles/v8.gyp b/tools/v8_gypfiles/v8.gyp -index 39b96803c7..9321982ea4 100644 +index 73099a03e4..88ca91efb4 100644 --- a/tools/v8_gypfiles/v8.gyp +++ b/tools/v8_gypfiles/v8.gyp @@ -68,7 +68,7 @@ @@ -83,7 +83,7 @@ index 39b96803c7..9321982ea4 100644 ], 'outputs': [ '<(INTERMEDIATE_DIR)/snapshot.cc', -@@ -1503,7 +1503,7 @@ +@@ -1505,7 +1505,7 @@ { 'action_name': 'run_gen-regexp-special-case_action', 'inputs': [ diff --git a/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch index 079bbb4366..367b9fb8d5 100644 --- a/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch +++ b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch @@ -1,4 +1,4 @@ -From 7c69553d7275bbcaa88fada8ccd0d2d9f787e1ad Mon Sep 17 00:00:00 2001 +From f1a15cea9a47d0a9b0ae78fb22fef3a268e355ad Mon Sep 17 00:00:00 2001 From: Martin Bark Date: Sat, 4 Mar 2017 20:41:40 +0000 Subject: [PATCH] check if uclibc has backtrace support @@ -9,7 +9,7 @@ Signed-off-by: Martin Bark 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/deps/v8/src/base/debug/stack_trace_posix.cc b/deps/v8/src/base/debug/stack_trace_posix.cc -index 87c0a73..d2c182a 100644 +index 270f1ca4e0..5227e88671 100644 --- a/deps/v8/src/base/debug/stack_trace_posix.cc +++ b/deps/v8/src/base/debug/stack_trace_posix.cc @@ -25,7 +25,7 @@ @@ -22,5 +22,5 @@ index 87c0a73..d2c182a 100644 #endif -- -2.7.4 +2.37.3 diff --git a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch index b439c66a0c..5b44e6c400 100644 --- a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch +++ b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch @@ -1,4 +1,4 @@ -From e6e691d093de440e0f408d48971e2b7332a07d58 Mon Sep 17 00:00:00 2001 +From af47d317e5ae12978c1cdc40627008ada144f98b Mon Sep 17 00:00:00 2001 From: Min RK Date: Fri, 19 Feb 2021 11:57:04 +0100 Subject: [PATCH] include obj name in shared intermediate @@ -12,7 +12,7 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/gyp/pylib/gyp/generator/ninja.py b/tools/gyp/pylib/gyp/generator/ninja.py -index d173bf2299..efaeee53ef 100644 +index 3db3771ac9..2e0a021703 100644 --- a/tools/gyp/pylib/gyp/generator/ninja.py +++ b/tools/gyp/pylib/gyp/generator/ninja.py @@ -42,7 +42,7 @@ generator_default_variables = { diff --git a/package/nodejs/nodejs.hash b/package/nodejs/nodejs.hash index 12ae449ab4..83e4c271ce 100644 --- a/package/nodejs/nodejs.hash +++ b/package/nodejs/nodejs.hash @@ -1,5 +1,5 @@ -# From https://nodejs.org/dist/v16.16.0/SHASUMS256.txt -sha256 145151eff3b2aa5ebe73384009c52271a83740ae687a93c98c628cd7d52736eb node-v16.16.0.tar.xz +# From https://nodejs.org/dist/v16.17.1/SHASUMS256.txt +sha256 6721feb4152d56d2c6b358ce397abd5a7f1daf09ee2e25c5021b9b4d3f86a330 node-v16.17.1.tar.xz # Hash for license file -sha256 6211cc77f9ceaf365db12faf050775b3a1e6da7a1eff3577ba006c4918103c33 LICENSE +sha256 69090e865afa7c62715b97f0712632d2923bd7a5faba91f94e4e75a2f9219d5e LICENSE diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index e9fe96812f..05456e3443 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -4,7 +4,7 @@ # ################################################################################ -NODEJS_VERSION = 16.16.0 +NODEJS_VERSION = 16.17.1 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ From peter at korsgaard.com Tue Oct 11 19:22:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:22:42 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/redis: security bump to v7.0.5 Message-ID: <20221011192552.9BA7986BD9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e665d20f7afaf531d9de1334884879caaa84a76b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x >From the release notes: (https://github.com/redis/redis/blob/7.0.5/00-RELEASENOTES) ================================================================================ Redis 7.0.5 Released Wed Sep 21 20:00:00 IST 2022 ================================================================================ Upgrade urgency: SECURITY, contains fixes to security issues. Security Fixes: * (CVE-2022-35951) Executing a XAUTOCLAIM command on a stream key in a specific state, with a specially crafted COUNT argument, may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. The problem affects Redis versions 7.0.0 or newer [reported by Xion (SeungHyun Lee) of KAIST GoN]. Signed-off-by: Titouan Christophe Signed-off-by: Thomas Petazzoni (cherry picked from commit af56cfe372a064a3de2e3baf446cdc59f81cdfd7) Signed-off-by: Peter Korsgaard --- package/redis/redis.hash | 2 +- package/redis/redis.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/redis/redis.hash b/package/redis/redis.hash index d9b6ebea54..a10df46031 100644 --- a/package/redis/redis.hash +++ b/package/redis/redis.hash @@ -1,5 +1,5 @@ # From https://github.com/redis/redis-hashes/blob/master/README -sha256 f0e65fda74c44a3dd4fa9d512d4d4d833dd0939c934e946a5c622a630d057f2f redis-7.0.4.tar.gz +sha256 67054cc37b58c125df93bd78000261ec0ef4436a26b40f38262c780e56315cc3 redis-7.0.5.tar.gz # Locally calculated sha256 97f0a15b7bbae580d2609dad2e11f1956ae167be296ab60f4691ab9c30ee9828 COPYING diff --git a/package/redis/redis.mk b/package/redis/redis.mk index 245e9b4d1f..7a637c106c 100644 --- a/package/redis/redis.mk +++ b/package/redis/redis.mk @@ -4,7 +4,7 @@ # ################################################################################ -REDIS_VERSION = 7.0.4 +REDIS_VERSION = 7.0.5 REDIS_SITE = http://download.redis.io/releases REDIS_LICENSE = BSD-3-Clause (core); MIT and BSD family licenses (Bundled components) REDIS_LICENSE_FILES = COPYING From mail at dbrgn.ch Tue Oct 11 22:21:01 2022 From: mail at dbrgn.ch (Danilo Bargen) Date: Wed, 12 Oct 2022 00:21:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.0 Message-ID: <20221012002101.02c1f4bf@c3po> Signed-off-by: Danilo Bargen --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..b8c9278405 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 9b2e9c2d8cbdcf50b3b7865b27a535815874c8d6066f9b7e1ca4d88941065401 tealdeer-1.6.0.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..18b5c35351 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.0 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT -- 2.38.0 From me at linux.beauty Wed Oct 12 01:34:39 2022 From: me at linux.beauty (Li Chen) Date: Wed, 12 Oct 2022 09:34:39 +0800 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod Message-ID: <87edvdeseo.wl-me@linux.beauty> Content-Transfer-Encoding: 8bit kmod install path is always /usr/bin/kmod instead of /bin/kmod. So if we link modprobe/lsmod/... to /bin/kmod We will get error like: > # modprobe > -sh: modprobe: not found because it points to: > # ls -liah /sbin/modprobe > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod and kmod is under /usr/bin/kmod instead of /bin/kmod. Signed-off-by: Li Chen --- package/kmod/kmod.mk | 5 ----- 1 file changed, 5 deletions(-) diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..cfb4a27cf3 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -73,12 +73,7 @@ ifeq ($(BR2_PACKAGE_KMOD_TOOLS),y) KMOD_LICENSE += , GPL-2.0+ (tools) KMOD_LICENSE_FILES += COPYING -# /sbin is really /usr/sbin with merged /usr, so adjust relative symlink -ifeq ($(BR2_ROOTFS_MERGED_USR),y) -KMOD_BIN_PATH = ../bin/kmod -else KMOD_BIN_PATH = ../usr/bin/kmod -endif define KMOD_INSTALL_TOOLS for i in depmod insmod lsmod modinfo modprobe rmmod; do \ -- 2.37.2 From thomas.petazzoni at bootlin.com Wed Oct 12 05:36:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 05:36:42 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-11 Message-ID: <20221012053648.B5A9540519@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-11 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 10 | 3 | 0 | 13 | 2022.08.x | 12 | 13 | 0 | 25 | master | 100 | 752 | 9 | 861 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 375 host-gcc-initial-11.3.0 | 32 bearssl-0.6 | 30 host-binutils-2.38 | 23 ca-certificates-20211016 | 20 crun-1.5 | 14 coremark-pro-1.1.2743 | 13 host-f2fs-tools-1.15.0 | 13 host-sentry-cli-1.59.0 | 12 berkeleydb-5.3.28 | 11 brltty | 8 libglib2-2.72.3 | 7 dieharder-3.31.1 | 6 flite-2.2 | 6 host-gcc-initial-10.4.0 | 6 host-gcc-initial-12.2.0 | 6 slang-2.3.2 | 6 efivar-38 | 5 host-binutils-2.37 | 5 host-gcc-final-11.3.0 | 5 igd2-for-linux-2.1 | 5 libnss-3.83 | 5 sdl-1.2.15 | 5 sysvinit-2.99 | 5 autofs-5.1.8 | 4 btrfs-progs-5.16.2 | 4 gerbera-1.10.0 | 4 dash-0.5.11.5 | 3 fbset-2.1 | 3 gensio-2.5.5 | 3 host-binutils-2.39 | 3 host-pahole-73383b3a39afe86... | 3 host-riscv-isa-sim-1.1.0 | 3 host-rust-1.64.0 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 linux-6.0 | 3 musepack-r475 | 3 ocf-linux-20171122 | 3 dahdi-linux-5c840cf43838e06... | 2 dmraid-1.0.0.rc16-3 | 2 duma-2.5.15 | 2 elfutils-0.186 | 2 gitlab-runner-14.5.1 | 2 gmrender-resurrect-0.0.9 | 2 host-go-1.19.1 | 2 host-protobuf-c-1.4.1 | 2 libarchive-3.6.1 | 2 libcurl-7.84.0 | 2 libgpg-error-1.45 | 2 nanocom-1.0 | 2 perl-5.34.1 | 2 pistache-3ec9d7c4f8b828fdd3... | 2 refpolicy-2.20220106 | 2 toolchain-external-codescap... | 2 traceroute-2.1.0 | 2 uclibc-1.0.42 | 2 unknown | 2 xenomai-3.0.10 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 4th-3.64.1 | 1 ace-7.0.6 | 1 apcupsd-3.14.14 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dropbear-2022.82 | 1 erlang-22.3.4.22 | 1 exempi-2.6.1 | 1 fdk-aac-2.0.2 | 1 ffmpeg-4.4.2 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 frotz-2.54 | 1 frr-8.3.1 | 1 gpm-1.20.7 | 1 hdparm-9.63 | 1 host-delve-1.8.0 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-final-arc-2020.09-... | 1 host-gdb-arc-2020.09-releas... | 1 jhead-3.06.0.1 | 1 libmdbx-0.11.11 | 1 libopenssl-1.1.1q | 1 linux-5.10.145-cip17 | 1 liquid-dsp-1.4.0 | 1 memcached-1.6.16 | 1 micropython-1.19 | 1 mmc-utils-d40ec535b9d4e4c97... | 1 musl-1.2.3 | 1 php-8.1.9 | 1 pimd-2.3.2 | 1 poppler-21.12.0 | 1 procps-ng-3.3.17 | 1 quickjs-2021-03-27 | 1 rauc-1.8 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 systemd-250.4 | 1 tealdeer-1.5.0 | 1 uclibc-ng-test-0844445e7358... | 1 wampcc-1.6 | 1 wavemon-0.9.4 | 1 znc-1.8.2 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/790fd9637c8bbd353e6d859db64c854fe2a4fad9 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/84d2518c75cbb6a617eadfc40f9ffa042aec0989 | aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/143430b6f17256fce77453ba6e24c7d26517cb11 | mips64el | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/ca03fa3bb1cf32ff8154b382d5c4dd5f9bd71939 | mips | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9b7d88d647c151df2c8888ccef4c2681d9540534 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/562031e3a06287ed544072b3b40e1e98460ea53c | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad184e25dee469d5573b0fa208da3fa888100e27 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/151970c0dd2b244a1983dc08033581342c787e9e | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3203ad10ddc5a382590635e005401f54469f0c4 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/17ffbb1cc5b104c9a090e999cbb91b2648b60369 | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c539423c3f79298e0ccd32f6d0dda7ebad376638 | powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/de42234cdcfc5310bffdbc9c46d05f6a3e5586a3 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/99205c6394261837a42dc30c488a3b25c4d0a44a | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/921a75548209405ac869c600fb5afa67968cac47 | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f41594b362de9d1c51534c91ba8b9d60703c5d6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6bf0f2c716091e3503200a2d4ba7475b021a58f | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1831be6c2a55e4ec9ed0cfda464f9ccfbeb96e53 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/85fe224a559e9cca3abcbeb018988d342183f8ac | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/295ecd7d8630bf4ee77814873f0cd413bc4b77d8 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6d9dac7e28093a40596baef54de42eb770e1ea3 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ee2e174a7635d90395603289675432df00b5075 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0d9a69a014a3deb4e6caa879d2b0224f100b6414 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/703d2dba1767f94150bb36333adaaba2cefec1c6 | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ab5fe6b3fd7cfe71e961b330b027995d834a5ea1 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a08032c678483768ab0839c176134c29838052fb | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b354baad99fda87f88318abed8cfe93435f8c2b5 | i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/389a7e8dd448e01c5088793e59be1354864a3a8d | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ae510ca630a71b9f459783ea0901c8bbe9efddef | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6b8cfcb36bc32e39fa9f6ee539915e3fb430cd2e | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f1f1810cca2f7deb5b311bb19668adcc301c8e1 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/317820f04974e3a712808385c18a82c15af36431 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e79e9ad340a043f09f9e0c891250bbe04ca343dd | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/34a33d647e7e23d8640368fa20a87d5d318e5f9e | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a4ac22c7fe2377a338b4a5e0e607f4ee9dc7067 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8cea6e3c052768f2a58baf1a389d9b1cc3430943 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c786e3a89b930480e60b14377b2a01261604dccd | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a597c19fb8cdb2acaaa9cf0721741ada3e874e12 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/35d0f632942150edd040e17389199ba04d92beed | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56bb0b11b0c18c2f6cd93f5714db69098532dff5 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dfd85db7add2ae8f5568b8c5eb96c7d5ebefcb99 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/23fbed310b2e18db46677c919f37a4f980410ff9 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56be9856023e6526c33cfc8244c91cec8de7ce41 | mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/feb913606e115edb5031619d3c419e2d4a379961 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1006246752ac677682c2438c506854aa64db5a10 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/99928f58d16b54b42f3f6bd5280d0e43e6359cc5 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/19679a8648dff153b728df3936bd0dccad376c5c | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/921a0fa9b981e74c658f5e1f48fe5ac31e57a0e7 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/780c30d345a0540c4cf473bc9b17f3844530d23d | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/13df746762d022684d37bfddb4114dee3bdc1987 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f63738733d11095a358d63567299827c08662083 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b7c6b02b1afdf2b9f4c4182bee9d17cca8a6c775 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fb9310781efa54fefbc55b1a62e0aac606047869 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e4a5e4b469fa0086e57f0cc9add62c77e147e3eb | ORPH sh4aeb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/deb27089f2c94969383d3acddb6e4d8e5e66c16a | aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/1d886c3089d67e8907dcd61075c0904e93e55f01 | ORPH sparc | brltty | TIM | http://autobuild.buildroot.net/results/cc51db61d23c5553ab8489c241154ef4dbffdc3d | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/f37b7d3826505699989f833e08494e5e5ff8e834 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0346a2fa4ecf51196b2c3570362affa30f1f2b24 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/4dd2d28f946cdaa83d0d5acb4795f260424a578b | i686 | brltty | TIM | http://autobuild.buildroot.net/results/0d810013e82d88e7e052a913103462aa7b9a3388 | armeb | brltty | TIM | http://autobuild.buildroot.net/results/3a7fcc06550a3bdf902d0aeafcc7de93d50f358a | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/329e426588507e977a329ab9013d8cc1268dbeac | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/261ffa03a739ce689fff825b355a36b20a2f0145 | aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1ba1c19c2e5e8630c8633f326073eef8b6ede5e8 | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/97f96b4e026c6165cb41238a5d5f92fc70020ecf | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/24ce03d937582846b93500a86baa10e6e1aa8e25 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b7f2827712a35b78039bf556aeded9f6dabaa796 | ORPH microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bac3dccfbc9bf3048e7c551b30a0e1a4302e8152 | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97701df77fc1dbc7ab7dba521a76ca3e38dd8912 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/93767e568b51622ea3d4a95afb411384a578a5f2 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a2f5f4d7bd6cdff954672c79a1611edf15265a0f | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a72f7e0dccbd469fd51d377f645efe366e5a3df0 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9fc3111c5ef6d606c14c109d82a845cf51d5965 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e79f9b6d2a4a94ef933c77abf781a0a31ae46813 | x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/edefc59ddb4cd65509f6ae2cb9f6fee5ba6837ef | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/537da7f95f7b37031d7143d13b36fbd3a4f97acd | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4e717e47839dfb34487c7b186636e03efb1544de | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9b7935e00f3494cd16bbf6461a4f87eb0b27ce59 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae35248b608d6ca5ddec053090eba4d61813cc78 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bdd3bfe442562c59c7ef9792715fa6d1b4017f66 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b1b1a3f32ccb4bbad188034142b10bfb73bfe18 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a06264c8fd1cc718ea0e4fe9f876f27831d8c765 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fd8aff30a8e5d726b6d2d2ef532bf412df8f58e5 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d7206649f7beef443c5c063e76d1d9aa07420ad8 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c9fab74d89d42e448f4a047d5e485533bf32cb0d | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2ac539fec76900f7e1bd3bbc7ecd04348cbaf309 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1c68f8e1067f90ca9f44788f6d5c701d298010c3 | i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2aa328c22ea6ef21a8f8a6716bf92c47b49fa685 | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/3272f3c49d9d078c9e9ad4ae3c57476fde30d52b | ORPH powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a4ce2bf5da54beb72064b143a75050a439208d33 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a393838e5bde026441d3283c1463dade0983e56b | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6112a60828ac6c8765f9f93603ee30c928c2037 | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e7583a8e6feb62737b229ad5a09e2c1baee01baa | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a1b0462bc20f791245d0b47051a9a478b94455e3 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2b8e33beead0c006b3d2b2264fe125d6ae670940 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/62ccf8eb674edd2bdd5e39f37bc7c17cc94e3ab6 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d67adb8ae6b8696173544d9bea097013951c3cc6 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/69b525ffbbbfefc6d5f8b51bc1e5cff64e99e7f7 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d55fa9f049882c33c2bbb977b919c3ea70f33a91 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/01c3cffa50d7ab7cb6dfe4480a921785a021e7f7 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7e4c74c23cc44326e817aa49591158edb0ae09f3 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cb071dc01a3013177f61d42df091c989d1bdb60f | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/839a08988aad929fdc913372eda4cb87b4835ace | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de4548e9f67521282fd613fdc03ffd3b3ae6a8 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20e2e5527bcb40f3abda961c66a0061ef3c4e82 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d865eaea5fd7065770edc925e96c825538fb5ef8 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2f3adef20f6e97ce847b89341a4072d054287c75 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aa6a1b08eabdbb785ecda23b835c27d5ddd6a696 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb51bd98aada4fa235509f0cb01a53db24860fb | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29a152c67e14984621088524ba3bbdfa7ccfeb76 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/18fcc3777a162bc13e296b5dba76288b084ebfca | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb53c8cb6ad0143acc60ab67d4f42410f0ad27c4 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b51c6e7b1c07129ec291a90b6414b640a3243a77 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cf4eb323c8898426b209b638fd9a16799cf9579 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/484127fdc4bc9a83456e72a88fdabb89454b919c | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3a8f09086d881d6462b8ca2746a502d6bc1846e2 | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5c2d0b6493ffbf52e9627e5d65f7b80681d5869a | riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8a957e8aeef0400a49f057d0587d3d5fdb771849 | powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a2bcaf4556ed797dd8c5b622bb0c33c17da4afe9 | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e4c6830e947fc9a01bf03fcc85490e15864bb0a1 | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/045a4049ae7bb2e7000feda1a3afb17b69f0d2e8 | ORPH arceb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ea7b9e130c7c82933365e66ba7a511731b71beff | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7be8b87cae2f75f5fe836a04df54b72a95be780a | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d8a62b292b68076f4ee1032d6ff58ff5b6fe1013 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/2df0e815574d5b1e228a4854d502599a5523c757 | arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e832f4c0e39fb879d243a908630af9ec6d6eae4a | xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3170cf77eed465ed6078be52b08e2c90bc326732 | arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99522bdfcc195585aafb40d738b95d1e5c9e5980 | ORPH mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0ef821cc9f725d0812bb08f5c28a5c486688cd02 | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/50a6580fa85f87ddc6b4ba69dde0c7ced2ce6d71 | aarch64_be | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e9527fda55c5aede1a998f87077314f5436793b9 | ORPH arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4504eb874b6327efc587b0ccab9ea9a0b3baa34 | ORPH mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/afb2d3014e60410a5c08cf02ff1a959bc8ff4ef3 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9ff45e12e4be0f4254aa7034ddfbc2ca0cc91956 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a9e8b584fb65ac475db9ccd362323ac74b49e1f4 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/b45c7b3c6d15a37846165f14a14ae95e8ba1bc25 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/72004e0791681dc8beacf60cde1056a1a83af177 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6f440ca4d36579026ea8d1fd45d8f80dd17f093e | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2582d40ccefd446fc347bd1388ce92c99a0f82ac | ORPH mipsel | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/b227bf90f6b7c9fe3c779045f8cefcaf3c152fb2 | mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/53d17d65c80dfcc1799592de7aca618cca2c3e20 | arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3f5d5e7fbc07e534918d0109953ed7a9c458243a | ORPH mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/993a2397c4ec92d2c751efa9d115dd9b2c43fe19 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/709e7c4025d027766bf65d1195baf49072a87750 | ORPH x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/11a56833280bb781a175746977a1fc5ab59d5499 | aarch64 | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/789215d1a24ee66cd8ec1e74eafe155838b668e1 | nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a5069e0c7dbf4d74d8c2395ce874bbb5e106eb25 | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/ed0a326f68c429ea95da0b8b0376454b7e39947d | or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a17130de81e242eb9fd34a95b5e27b834021da6f | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4e3962cbcd7ccb22f8b6093ce6ed7fc7e0c2f139 | or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/c06b42efcd0da915da740fef3fce0fea1f05aef2 | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/eeeae56a9723bef13b397167ca433cdd2cf933bf | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/16f0f845d3f84823c0e7e9fa9743f0f3d8a97adc | ORPH powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a24f98091db6bb0e890feb72638b96d3c32cda07 | arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d0332c6b8d3253214e0c912a36dc68d56d0b5eb0 | arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/d30d43a9cb694555e79f8bc646ea8dc9ea2851dd | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8ed57e6ba7354cb8dc2ef9bacc81f82ffd0dc59c | mips64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/afb47a30e019eb171851ece2c2c1b4cdfd96cf33 | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d0f1bf9784436978f0fc3abe30ba43f6cccafc30 | powerpc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/96e40521e06da675e1b3bcd8452d169b6f5309bd | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/926a4ee20ea69e45156c78a7f78bac962ef9d55b | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cd7b1f3b5fb868a85dbcf8af0ffdd75674bb5f2a | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/252716069f100a0e8161beb909ea303d47526b73 | x86_64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/aec701e2328411817b19b6c85c2e04f5bf0e9cc4 | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/a5f06c86470af298491e359a1c667a8677dd2e54 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b8449ce4a0701d6b6853f0a684985d4c6abfa97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d3ab471b470540dfb0055f3942002bcf697624f | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bab8058e8a6ad545e0a85f19a6521287b3b6eda8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e79a959c4c81dd0cc660d3c82f36fd84003e1c1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be0f3a99ca1135d1d64971b71051e7c686866497 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6100b93bd310d24df7b9f5f1091a767ae666f427 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d14af6bf6cc3cf219fcdce86e19d92cb4a757e50 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6bc19f452dc73039467420ac47c01b776fdd36e1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ec083468463bc4fc50a21066018cbc73fd54503 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f41e97f808785401b708e795b8423b21d19991f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7994d0025251175e4243701171a6b7210b8dbc16 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/197760dbbe212de2206e842c152a3eae100611ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/579408bf8be26c705ee623603f4cdfd650286957 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5426e18f67c88eb70fb3d1188c876a9c28da995 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/227b55f86346bb802e07be5f3be1f3a4060481b6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7e191fd726ab704cb572a9aa235aa93eb87403f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/824fd54cb9fd6809164860da9838a86389283e5b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc0cd8fd99099e557ef941d0b62b890d99cb073b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a755d5edbb57adb4bfe390bb2d18b10fe910ea | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/869daf57e80d3d3cde4b8696e7b6e63f635dc06b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce5a7463d1b835868a3dbad0e41069afc3f9ba79 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0043357ab7ac15e35f70613f7cd0229e472023b7 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09e49a679e03b5ab3bf1ed01fe4780854ef84bc8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fbcdb0dcf52094181b1d69be7735b04e3d30d3c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f1f1f080ac92b67dac4265121a702bf01d606f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d10d8baf5ba6599fa65f1811d832519336e91bcc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97eca688cd177f750c3cadca2ad1a0dacd41d80a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f46d1496ae8da5f85c4fcaf1b4e41a0fa58387cb | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea2409526df5c15a6c13158bd0f5babcaec9f0be | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca0eb3c2dd1b12fab4f584b082013cb907f056 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e03d82c56e8c43448290aa15df69dce3453aec41 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a0eb08a321860784e995c5fb2909cc3def409d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18f58b9f6a351519c81d2c3c774f6bba7ab7c981 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6877a9cb7e989ac24c771e21e13afb26bb1410f1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5bffb780721763b384e84538c436d3f68e61c2c | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e67f1a5c5afe559d43686b9005158d5d5bbb30c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6544f70979d3e542eff1e34c33e41c5c80c3231c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fbd5d5877126e102098247265e05901b8ec8fdf4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/132a75774fe8cf15a94861da3ecdd2d3909d13dc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37e17c3af02d4f6bec452cdb9a783d54178fd983 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a8a904b51b5537f3ee6d94905bbc81a6638e6f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ac8095e3a920e561ae71513fabda6766546065b | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7ee3b7a9aab40f8c26042879524b52facc49437 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b2cf8bb94cedc078c482e7fb711bae8a9e3c60a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9fc0da2baa6227b56e1577df80222bcbaecdf95 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72efc20d3df70bb90aa2a7d1502309162211f692 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a984cca0c7633d6240e5385236298a06d56ce636 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1132401325aea012031c704cfb125140881817c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e061bb7a5a013c12491375ec0f47c8824d5ba8ce | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92cc31862fdb127a2e037bd57f0b8980d4dfbcc9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9c676aaa7b32c3373e52fea0f81d5b5c42e6eb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b7ca2e836f7f735af00da34ec556948e9754ee4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753d83439e284aee147f43ce65ef36a9789c5fce | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/169c25f3d5c72ab53e50ba874ceb10807eb63771 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb5dd02f46fb07aff26abc50bd3f59dedf5fefc | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bdb0dd286fab729e28658222330f8a06df2ddbe | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f099f608ef9e9fd42fe528baacafac72218b50b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d0d3ab0b8ea3b79f5bdddc9fd1aeca5482f2662 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e517fff50e0402309f8b143991f972bc41b9a26a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/844c28be7f81cec0288242efdf66b7feb3b10934 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4357f40408a1efe90f126a7f4784af1c153629ca | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2592df306b91d3e1115efd026cd32173bcc20413 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92adf732c43cb97b96ba7a4bf383a3fcc4d83a2f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9657daa044fd9404e4067e1419d6f5b68153d1f5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15402c37f18d5283676b77b085489ddde6d6017b | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18062b80dfd9d3822e3ba2c440d2fc87b22d9ba4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32071db54d552586b87b340af2083ad884429553 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b792116457696a4ba6ffd2b461cc3b81af991e6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13c87c2db1cfcd46fdbb364eb3ed1bb053d783a8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca918494d0ce5445f41f7f51f9bea31a5e81b2da | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b4346a4f91849f6599ee531fe789dedf88bdce0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93da532f18bfe66025ea12e7aa225a347c43d790 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae14c6e7ae9bbb495ac4f58abfd1e76236d85b3 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0d865c91be2760b3de130790c9a03003e3444d6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/290aa1bb2d3ff882ed7b673d559a2fbe3f99dec4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3a5db26357700cae260639c6a6d018d8a513f0 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5175dc0c2476bc3505b9d2c36150c319b49d9c84 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/811a77851fc77577c8b64a3aa383833ff23006dc | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8556b25bb120790eaf470826b74f155d80468bf7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e8b67631dad47bceb27980653d9aa6cd33756e5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa641b1f45cd45893b0237ee8d7acac530155a4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a5b6e22f567f2652fe12c667c1458d907dca008 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd197803491828ecd255f178ab359dc758b6d551 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90f7fbc896d78e5db954be1a0662eec9f94efaff | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2eb56b509940eb2db2084a597cc4b3a7b889ddc | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62ff8be7c0942dce808bc3d8911b589930d62003 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/932b53100fb00ca419512b1a527d52c1a97d4060 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6556d0e82f8a07867624c7492e94608c6338927 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59e2cc31fa7583f5a88637a1b55894387a14aff2 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1e63364e83486dfa37fc53fec2ae1365b6df821 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93012f360497d909f401972dcbcd7373ef956650 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9dfaa1ef64cd1b35f469c76b91c701a2f640d42d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ea7803178d80cf14d6d54944e2e01727434f5cb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4aba9ea2ab12569869179cd24ada8bba3c509b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e2498666801200e7b614250e8077afc3aca86b3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ea1e8ae07860af9af27797d0dad07a3718101af | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320d81f4e574af1fc3d2ca03e1fd013f946cd8fb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed4163fff6eecf41f2adb67ebbb0ff46c4ee067 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/abbc4e64ba2a3dd11a9712bc42d17067bfd09bec | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34084d48682ba7b3ffe3795eb7d9c9d6021d2106 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80346009ac641bfbb1b3b84a9dbd673e77f43aa7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a5982e523d3ab1b594692d1b90ab45b5499e1b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/638c11b8feb97b4a848591f01d441e1bc77320fb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fed2af45405686f7a1d916c4a468e8dd934c0559 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fadf874a3b909dbda16e5a5ef9e740b6c841e06e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69dbc2472d1265ba8757310766f5cc505ed10a7a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5e8b7a6bb748491716a8239fdfe20d28732ca0c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769b94b93bd26d200ab5a2dd0294c1592dabbb00 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e2119de0ef22de0c8294b7e3a2d9e58f8d76db1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647d5376a2b18bb0cd7b0f22d4f9b496c13cd2be | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2695ca219a4cec71b520959ee970cfd187fe2cd5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9679b9f2c651365426d6a3caec76ba537b42dbc1 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25f62bc40d7ada1032992878696519e515bfe9f2 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9696e19fcb9d238dadea69c807d66bc8b18ebf3 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fc22e5fb104308ab032b921b41a6bbbe7429cb4 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1e3f063015514b2e47745be6977a07e67475bc1 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0851e64d360ba5d17d328dcbf228e92d5e1dc306 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/243f0a394df612342146b23c70dcab33f31c1d24 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2209845634d2f0c5a1531cf4a259edfe04409633 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa211a6540003c246f5e21da5f1506021e0ba8c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0ae2ecbd536714a38d60407085d28c2b4f16fb6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8997c4b28c37f81d6c88f1ef7d71af6e1621e94f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b35b50e5d333e926122b42affc57ada1f444ce53 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e5c04cd297638fce8d0c8c23f28f6e204f096e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cfa28ba84a15f414799c14e0a885cb1eeb03bb2e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9617020b9699f196d5bba18b195fef6978a30220 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97d2f1349e8e9575c1c71c9b6932960fb88d88a6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b9252a98271edc5aeb33d8f0fb6f780f40bfff1 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72280c51159770f90830d9c0ed5816dd6a35c386 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a327039176014894f7eb5dfd3788750b3fe7c502 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc418cdd590dd65dbeb201acd9f71cc0fcd24c5f | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdeea5facf85e2c5923760599aa64233ef9eaf70 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61629cabf7625216807d74b7bf514dc6a0d47baa | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d544107673411caf20dd11e43126d2ac07a322b0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d2166a12faee9992cb28207b03660d614a49bf6 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216b43be158a798ec5b42c7c0a0ebfd29a0c384a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e7bd38d61b830b8e213e399e28175dd00c5d3a6 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f6a5f97f1001706eb7062f2fd57a3e57a6ba57 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d11cbb2353d750e1b864d02b74df278382edb64 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e73d84ade8030478428277c4b97aecfc2522fa8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca018cdc7e4523788ac0aa01233c09543ebde770 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b215925e91813db68fa600bf1d6896e55b02dbf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd82425aa0f9b0e25cf4425e08401a905311e8fa | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5406b5d32a64ee82a4db1e884553e08727dd98a0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4930f9145d6f393ac9bead727aaa9bf2a8d167d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ccf0903e529fd2820f00376ae136c60cf4ca523 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f8f7cd96ce9cf39e344deb178dee02d062f0ca4 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3db806c0cf126018292d3d83d81410cee6379f59 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45bbe47d649018f8f156ae46d2092c4c090072a4 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/253c6b5bb66f54d5707f9a39ec3ca589d27aaab1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3760520241b05c858c6a31c7bfc08d6f700eec4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28897f3ada83ec56b8780a5b3fcb158968421075 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62e35a296840d2ddba7fdcabb16672b0d823e458 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/990f379b53c1166e158db161b7b13104378104b1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0357b9f08e50108cb61b9189df77e649ba0c846d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dcdb2193cb5aa9cb7ba8edce0e3b1fd2de32eec | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/875e7b7b234f232d02188582db5566722b7be80a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c690cfb07c2ef73880b558524d4a9280869eab26 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ad59c3202f95607e0621ed8d88d4ce212a207c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10e1aa871ced8acc2075b2df25d4f5f6a2d10156 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75fd8a9234691dd1d44bbfa0042313f1b68b8936 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/89ac8837710a4df60c222509fb423f4458efba54 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e6bfd5ec65df0286efe0c89dc703431b558bfae | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbd98e2fe401c1337fd9c0754b7dabdd220d36c1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0c775a5a6ffbfe083974d2d3a31b8bafe2868af | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86545991d4f7d82948e21c5873b10704c3012a20 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b99875abadc907ba1d41991a423549627304a2fe | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec93abd1ef29c281ccc75e177be6740134359708 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33ac614be44a5f65bd7b9f879104991dd3e5544f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4849fa1599c1ab0fa3886c0a4af57708ff4fa081 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8508fd20d6119c62a6bb8cdf24a927e63d31629 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c305439077dd6aa173b5ceb7b6286112284b825e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbfc701cd352f1e8c98d92575d38f4307259f44a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd335c2c6e7bf83de0ad36896189be0738b45a13 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10be76c03ceafd9413395ef5f82ab1828788df5a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7c14e01ac5dba53ca4599549547a07b63806fe3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eee1f579ee3f28c54c10c20d5f7b5818a391fba9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344c0c2fd584c7c1a2a0a14eaf443d2e7d2289af | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f553f2232214162253c5895e56dae90f30767c4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc54dbe6567c1a723babffa7a19f4a62edb8a28 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4333ec208784c95d2006ddf58d67395d0f357b03 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9b5b424506bc24b47add6c8b6a9f4297c9f5f7 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/180a9eac416b5f7042c62e6c69aaebb356895a07 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b8b8f7de679bc5f38472a43bdd6ea2e2360e63a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d2395eee36661fc62d46d98404469feaaca0b2b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f33acbbdf0661e4e559a2e4f8d89ed7f4234d473 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e92cb0a382e6152ea0fb259031c9855061da07f4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58bb073af3dd7d00dd379139b4f76d9904c3ca8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d47d8caaea168256e17c104acbbaa33da0932331 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48ee582a4fb7b6a4cd5fa66460c689d2aa25c23b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a36467004d2b4795851ccb306f28a3f532c3039f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b9c8c6f2c250a892468c03be626336b635e52bf | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c64cf6c663371a28b6b11596ed6603ad870fa387 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63e7b35aef8f9d982a5c64d384582655cc9773fb | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d457f6bef1d38038a30a034416f40a68a18c695e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016bc1e129b882999032e88b738dd93a3b29af8c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09d96d593a6d19b751c89dc150e98f41bda0dbf7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc78641f5f48c6b4924102ff65863a98f8f0a75a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6c247bc4b76e28067e215f2aa79be3fa805db6 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a454eda7bcec41f6f3622b9a0abc30c7130daff | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec9680834ee7249d7d67f195d7fb6907b8576a31 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6fc663bb77eec235d82269591bf8f22ba681011 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8433a6dd64879a71d995099674da505fe5db5a5f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/026144a41cc5311b462465d3fe7f89a797206ef5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2697b36c09706721c3e8d2fa3da87177c50b64a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd4d671d859f1f342c9baaabd998a384471b29aa | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7639c854910f1c93b65d1eaeb73860daae29d1 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5f0dc13b581916b7c8170324e61a38994ac4bc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb53571923f4c519b0a55166d626468a03d1f368 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770d7b4de2eceefd95da021ae216fe09aee75c92 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/808a818ad85830e76846db03c5bedd7e726921b9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d7a2d30030198d9d78482fd6542d0bd6146b22e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffb78b9a703d40f6d10ffeee5a8dfae55607200a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/884df5432d1b1d06eb3f9be1b0450a169d94c6af | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/459d0fbe4dabcbf94e321e3c28c3969d4f4d7769 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b3d7c46fdf2b2809be1a2bb622ac374d84b5938 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43193f19fe9d155f60edf3aac8ae269cf7d3fbb | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75c6c863c607ac4590f760ec7f98e15bc11184cb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bed79811171c010dc2994550cb0405f6f92e2ead | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2b1f509a2c2dd6ced12f81a46e1c2bead590e24 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/032166dc4714176a69fe15b63155fa42b1dbff34 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58e92c248e7bb244b4328b7b82452066ca12f62c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e5b04a4214f7ac3603b293cf0c0a04abf426b5d | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1f81af6151a2049217a088be007c28457df4733 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9847d269914997664cba94a4c636cac44fb3a7e6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ceede7520e8df238c9c34a8243afcce4120971cf | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee725f47ba28f49fbab234c7d6227d00159b32a1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b903e5647accb5432c0a494107698c10c9e62f28 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f75b58b0a2e40e8c47c6e21355173b4930291d57 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d4eea76d6ffd50e3f7f38e91b85e7c1fc449304 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41d076a6fad75a9d698ba334af1e8feb3899a9c6 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca61886ee747878071aed7fe6a55200bae382e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c09d6aa6b5c594f264d35f0565441555916061 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14e66b7039afa6229f4af7da10fcbb4f9e4a954f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ced681a6e4ddd0a7720926241aa8906cabeb0616 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e518a42495d23caf8af81461dd51915a8a26d1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e609064e0cef578ea9571ec64861e1c2fc28d8e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0445b79cf03d39a85251cbd152656f1a9baafc8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43970fc116801205e40f1fccace2651689baf222 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/882984b7dac01d31179bd5af3365a16ea3486101 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31c55f997dab1c58caf32729b2c97ff19bdf2f5b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5117b26637e191f7ba23dd8d9c01e6732ec937c | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049c92068485afc0c7d248a798931f52e6e401a8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769f694603c1cf80dcb6b1302624982a8c1adf0e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/888d2bab0c2e352f04ee76e7f12f4632ca07cb1f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdff0db6c799e5b079e6414d86dd95b767442176 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da2830c648efb5fd6e3871c5be4a1a72d90008e5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8716d1e50c828494ec37e6a2ad0a038fda2cbb48 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb5ca785b41c04f0d210d51f36b587db867bdc71 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ef65ff32b03c12a80c3abe4559afe354ca0b070 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9b789130b3bccf2d95b7131ebdba0c30a6ed6a9 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4a198d9ec80370fbe1f64d079942166fee04708 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f7f177b633a021cf7d3054f3f6f5bead0a0ce43 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/157af5e6b5ae30f1f5d1e1302d3e3932968e1321 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3feb51541fb82204300fbe4971ed08757d54866e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d0483b954f75c4212149101fef44ca0a4148351 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95aab551f66289e146c034f878145bc4b83fdfc6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d73c08783b507e3934363782b8d17bcbd17246d | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/675857450f360a598570b1485c944ae1e5acb5dc | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e30934fa0bc715641967c0d799eb2a5b09e67ec | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dafde5108a995e51f9d4fb735599a5f46803db27 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/558e564f0716183d79140f0fc35075f4b422923b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f7194bc7d23fc87d49e7108ee130471a3a737d7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61c3a8cd16b83af35d0e06fbb339c116614ad888 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4d336a1b1847ee9188c2f8d1871f7e130baa4e6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a45ec466ee0217b92b6d2d32ad64584683b0630 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f121fdc4ad9f4c1e192eec23cd385a7dee0cce | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa3704162680d5f2fdc1130027f0935d0c6a983d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07e52aad6282c35a38add0a1cb9009b4d634abe | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/714f7a6eb03169893f4bf6adda8ef80f6b493868 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f901a2098a63a0e3a7e580c963f219637d2db680 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a92243bf390f9beb2e23a8408971313e039a0cf | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c77abf4034eb74e99e0e7ba8fe86e3fc797aadd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4e19e5f83e4cd990ca49dc0e5b5675f34414c5 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31f6c9ed0070a156050af4e7bae6997378ca5132 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07751664b5050850e248a1519c91b4d443dcca2a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827680dbadaac87c79d4144b7e3ed886cf46da44 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a44d30ac31f8ec2862d1da45d0b3efd6f79042 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39525562eecc21bb1da2ec0aa596cd52207d66a5 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c33315d339a7e97e86d7384df6c4478d4b4426c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed521f1aad450c0b85cdabf51f4ec3e52738981f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad30eed7f49d40cea72987db017a09258fe1f0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa305b931f8800253625a24461a9459764bff625 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b313d509ae32a8920f7dbbd69110d1811d9d2bc | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecae3edcc38b4d2465d71234eb067d27eb90b7b6 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/070f992e4adaa7f6e65c6cd3498137616f9ce398 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/044a809a02b8168ba379e0b658894003d7f524ac | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/890d413e7b788725e72a8bfbdb020f76410d05d1 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4b4fe4945c7dbb3d174897d73c9036d40011d6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e11e849f245a968825dc755989ecea621f4c0df | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c8ea6f531626f9fef4a56fb88626900edd69070 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea928938fc6c43aa16a86b41dd7c7026a8313f45 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c88c32c98a2d839eccbe05fc509e31f0e7295e19 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e90e9e7612fc5964737a39dcfa3133ba3ad2a70 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad1b4736eb8f6d23b094534100a65b3f16242953 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478b24fd23d07f835fd70f199dadd7cbd15aac00 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/000979ccc0f49698558facf6d771bdef3f07a32f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86e2e58b20f60476e5f37a35d3e5be1b426b643 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9550f5080c0bae5d4dc2f2aa41aa716748bf5e41 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85a45a1026d97c9ab54ca4fefc6effb3ebbbbb07 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b0b6257786142166a8837fdac3660c63b506395 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de125da38e98d14e68ae60e05addcac2e073971c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e41bbb45e47515e730439088e773202dc17d322 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a3a0d1ab972bb4adbba53d043267888012d829a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5580aa0fab057a92144b7ca6b22efe4d808e2536 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25c231d153641761b25aeb85200c0d184dbb64cb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2083b4dcc07b1584b65f825130b1b4c722069f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8977b2abd8aa97143f5da28a3565f16af0043c6f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6433ed6c9a856dec041b11b90db0c237b2b0cd | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/150aabc1234a501ef9840f4c18f5ebc61885ba77 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d0f143af5b865adaf60260ed21f799ad3139dee | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4e815076f74fd69b1db896bd670e269ad64d7ec | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2658fd9e7e6d359cbd5fa9f3c40496ff4bc7be7 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be8c682951058e53a2826e338818832978d645a9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0905bfac7d59a07c9196a990114d20f657d547bb | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cef718e3b6eb91a22c78c0acb9646ffc7812c36 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fb207fb56d53c0719ee2016482eee1aa17d4beb | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01acde1187f04be43d0f328f1d4c4bc670d3afac | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/306c87695db5dc7c3d99851992ec6c56f4094938 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db654ed3d59e36ca82b21372ac6da1aa8afc4b1b | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/791b9a3367973bc8cf1cc059704710cbd2bf7495 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a69d9c406159f4b4ad083233963ceb24c30a28c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb42d2c661dd11ae04b8484f50f20deda00da41a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e374d405a76fca8534c62c9214116ac6279feb6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82b87c55f1b8c8df513b88de60915f319f5fd837 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45dabf7f9510d2cea58c4bb45a9c0625c054f003 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1806f7367e1fb1a0bd6b808802aabcca60b14229 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6f36f0e9c2925d31c75b61ea4bb16a7bc6cc5e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d388416f8a02c02ee3328801feb154b9a234b123 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d30bcaf6aa45faed866aa6cb3c4d25082d303d2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5d4af272395720bf08eef90b314676c378cc1ae | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8561ad167e708ebb61648c6dbd311682f1f457a4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe1df7b41183eb76c1a38625582063c96c8b6428 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb7f3f978e2bd08bcc64b7369ef9d5d6f88be16a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ca3d0897a99842dc46b58421b5de2653da902b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cecdaa9328caa22fa8dec1c8921503ca2b759c9 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6497e333090c48555d60f0a14c59fd9ba3190dce | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9227e1c5f45ff53568c02aa17a924bc88e50cd7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce814cac8e6a203c6e05982f854bc97162a5dd14 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8690bc4baccce8ed6ff5ebe842dc469aac331ba | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/777dad3e3fbbfae93157211293554ee197ef2839 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a5a1c4be8dc4368c4e57d437587be361fe55f8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d42345fcfd6199cfe2ed76e14497fa7756bbb44f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff47e341aca679752ced8e9d643f57c9b92c21d3 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a72ad4af3ade0a5e72d711ddbf985ccbf5c4d02 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ecb835113576e2794e325b6797c13fcac4e234d | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c44408801a75967c190372a8847a92198fd2de1 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71b63b7a8a1da178c39875fa93c7f06ac0ab0bb | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/598f356442d08d7c00a4acd24e68db0b673883e4 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eeca97ab6c488e945317a13dc9589ae61f9f5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0c4bda25d3fd6bec0d4c5f88d03a461885f7f89 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/490e14ecdcf2d78ab6451d9183a13de2879e31fe | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27cd6ff074cc441db880d2bdc1332a564bd71fc8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53c48337f4e38e8beea0eff924fb45b3e75cd19 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e8c9b49b3f76d9949aaac9fda6eec915f61801 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79dec87fc8d6129679b2c96eb4fa503c7aeeb42f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf7f0dd0f6edc6f976a439637c863582f87bfe7b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f28baba18fa9c4307c9e864a22a913bbc11ac840 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f12084e6d631d3786a99e7e098f608502c2307 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ca20ca94a7aea072b283e85cb313d9de86f1ea2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b81f44065baf9f52d3502767bf1cca97f3907861 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9505b3633819fc03924ea82a6fadbd23d8b5095 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6f898e4cee21a4033557e562a553286c8bae791 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4ecf06d27ebb1f17076204649d176aff2a7f5e6 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b609e4f8922abe5adef2898b48ceb72629d0c021 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22ccfb7dccae7e74c9ae79e54ba35ef1666352f6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8552d71670019ba7490da0ccfe793f476e6e137 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23716cf9f9c0d7b569237f6d245fbfd0ec033a21 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38ce1bf94b51f6fda0423d175fe591166e606b8c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0e0fd407e7045e396cd2cdf13d05c27dc39658f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eee1b3d8454bf051090afb94df0923938afe287 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fe42fc166006b2f4d12430b27f6bfdd223ed305 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95ff358906ade7aff787d9db6f4e701e09763457 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d41946f2997e7e81032dc9c8f74fd7ce4e9b4b0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd59fe8f9a9a7f6a19abe0863dd380a3bcee70d5 | aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/748303e81411ce4dcc7ef9b42ed8c76f346494fe | arc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/d6a0bc684f72414b62cb0cf40c2cb8598b47ebb2 | sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7dc350d1c2f1857d27be59183b8bf37177f88dd6 | microblazeel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/0ee89d616333ceeda4f82c262c57ddcf6b0bc8c0 | powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/388a2cc92398a09a6b720dba89fe9c394cef8023 | microblazeel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c7d6dffe47e0cd162492db9b7564b303f8949f50 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/dd62aa0dda0be9bfd846de98df99d8fefdb75e7f | mipsel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8d8410044fef08b253c92716c7f0bf0058fd380c | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcc5369e90f371550ecf823acddc3dce1604616d | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a72c5e5b2de0278f697de2e665a6c7a0a4523f9 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bd70f21e42ff392d3b7e0f7a4b803c9b8cf2ec33 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3733d0ed2a2f424fdb28550c11dc010022d845a1 | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f188862d6c9c118bd0561902a217179c2d559744 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6d9b67a6f3b0317db346ba6cd2879c8f4fd72853 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1ad6890cebeea960e7477f7ea22974a4704270b5 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2d6cf40e8bfaeb8d394ade22fb5a48689419a208 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/56c021dd6259d89b8dd0e3fcb51e8a091dbc8447 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1fb290058831b2db96375c738b935f83f5d65b0b | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e23c72590aefc67aefa317f840e2f9d4ede025bd | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/486188cba4946c091f8af46f2acf0ad57c852fe2 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f34336f467aaa7a0e660e5f513b8fa563eb7437e | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f6321d542aa92d4485d715ba2fb5c4b5c2874d89 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d5ce458e8757364d779539ea7389ab47b967b913 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7458482d1f6c8e6bb870d9e0ebaa16fc18fdaf60 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a0c42592fca2dc183ec4285cc55eb5726a08057 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cdd651addad4b7ca4a27be3d3a2fb1aadc845008 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/172d8471e1da235d5ca30994319fb39fb356ffe3 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/21cff6b9fb25ddbeed4629758697ef4be9ad97bf | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea370641200774482e29558fe5f63e3dc979091e | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b017d50007c7503eb7e1faed639a226ec27f1aa5 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b989f6ae80ddcf75940d468af1dfbe40cc55e310 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4316df7c08f041bcb736f017af05441f5a4f5106 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fac2d1e88c1f8a5078281233c80f03caa294e9e5 | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/5c2b113b82394b670e018d32a4c115fe82aea319 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b946c368514012026ed82ce10e1d2c86a576a1dd | arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f6067a50340b7ced67cdb67de9125c8a4e20bfd2 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc425437fd4c832ab30a37b2b42a297ca01ac219 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9eb9521c037cc5034c1eb1a3c6b0a45f7257b83 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a34c1636d93198a38209a87d026f992abc60d05b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b7ee5e650269fe32c9b6eee2bcc43bf70f03fdd | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/50a2f9c10e3e25f84c2c46fec9436553369c39a1 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b2d5978befa17d782267407ee699387204dbdaf | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d7e834f031eb30389a8984ada51f91b84635b043 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/676a4a02be934202b3928bf1671c5d131ed1da04 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b0f4c776b4d9eae0913d404c0eeec874fdb1701 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/632cbdde3987e23d5665fdc1c8dfb06a5eb74474 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1731e7da6dab2932efb0daba345f3e7e140980bc | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b826d612a32280256c5998275f31287de2fdf87a | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b833b5200dff6377ccde9fecb87cffb9f371a9c0 | x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/fb73187885a1cbda134ad4e6e7dab434d2b797a0 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08172ba68beee0c92e93149910f6c90bd552fe37 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d90f695b2ecef59f6829e5ad0cf0978f8c86b33 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1bba6be441eb028bbc2b997b5caf52b13b1e582 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a63ce609ecc0d0812cbf2e3126fb3aeb3c30506 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1e3c89f8c5b23c9600f3695c4287783f0d0949f | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/fd7503469bb31b03dfe24f9c117d03969d8e7475 | arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/096e12e3247538ce451cc933494de27a66bc3989 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9f64f9495878521f957769de4626bbd60f955e1e | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e1100dcbecf3b1cb1e55a5433deb7387dca1264 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/093a7d7a619f53c0bc7c9dac0bd3fecccd513559 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d48c50d5ea0ab438840724982e58f50ce4abb83c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/81903f96e5f480b742587bd7426f028d37f13819 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/e08feceabc2795819d666596de0bce1e11aa64b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5c51d014cdc6178371cdffab2d962bdfea85064 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6e2b88661bf06ccc907113bba2adc32c19e71b4c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a2562f5fa404e6a2970c57458eace161f775010b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aabd863c02f16e5b7255856c4649cd2033fb77c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f1e3d34926d4ecbfd5a972d193e50cefbff44d7 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d377427b65236cd08a7e86efead21dc0510cfabf | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ca13f99e08e4c2903e29371e550356b443e84f8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaa2b845b252ad746d28c22c326b70723568df31 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9c27f2146e4adee4fd1d8a18402e8dce47742e1e | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/76f66889efc8f88728d060d949293b18fde16e3d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a6b475a351da1de294958d9da5f65f13430b541c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef94c214e5e78f43ad1b68d7743ce3fd9d8c1c85 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c186cadf6d7590c38ad581e317523368b8687e25 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed928c3ece5c03d912871ec83ec2d7619b2b995 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/25b9da3e15e3cf076376f297d266dcb0fbb60c95 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/35b73bfbea83de50f87abeb9dc650252b8568e33 | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dc9c8df47ec2d772d48319fd105281578e3d5356 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/13801a386bffad30948a822dfb7699f29ccb3e75 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ad18af624123050ec81be35e18378d6e9419a9ba | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8c4ee5d40cd2cf5b842d630a278402dbc1ed8ffb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc0f9741aebc71446c969a94bb59d31bd8d2917d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9bb4ea4fbc658153329aebfd9e3eb458f84b1f13 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d680b706839365738d04b6bd2347f68b6a2d5561 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/42a27598d9269c97a332988d86a90eddb70c3904 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1eb8a2c09992f7c2fc2462fae78cb4603fa7b0c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9ea243d4ff5f8bc329fde80c10ef3aedf2f4746e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2c11b6afe3ab2613d384480652d64f11e513ff44 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95cd84fae3d2c0e8b843cee38d0c816e7b9c620f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0459a388204c3740499bdca526136c4ee2a0272b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce8ab4721766b1b304449e77fac273019daf1368 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b2aac6306692bdc81736ff181c3b82b51d22741b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b379a3db0367552b8e3a48edb66cc18ebd3a87b5 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/163fccbd172ea444d949603f932e343a65e3fdb1 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/64960f055177b1758581a84bbe1a16b3d0ae3c44 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/ea30a9e1a82916667ff5ed36bfad749d8f899db9 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/1e17607b4d7b87130147380b9871f208c3022d71 | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f122e4d4d22b8baaec09ed80e869b7a4310d37d | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4a043f2ffeb3a73270f1d01e0d1ba4f0cfde167f | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/e7055723d25ed69dd99e925a89245a1b813d1278 | ORPH mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e05f664a29362616f9627dd68546761697072cfa | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/382003ef07a97aeb0bb7d7ef121a75d4d2c2cec5 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ab3057ed2e04810f7dd39fc7bd93ab394c81e2 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d8f16746519e9cd8d7f78ee1ae349d708cfb7ca7 | sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8b04e4bb08458f011581e5b8bd762d82dfa2502e | mips | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/9e4cfcf9bc9060dc75928ef3d05b0618763bd9f6 | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6b11a0c296b322478379b6429ee8cec11365278e | mipsel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/465ad5639207eea66d34d54c9e784107ebfa15ef | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/cf1f26cbcda0cc4eb77841be2bd2c6e5e457411b | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/313106b9deabb7e022452611c1668a037f19d1ed | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f91d910fd96a904c319dfd10001bdba4df7786e1 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/003b1d284a677cb048909eeee840065b3f5a87da | mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29dbc9b703e4d260676a7d0133a8ee0055dc2279 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d1e0b1c31d04d195b96259c0f00ca3baa9211f0 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fa37ef3155d81a4e0143354fcb977fd3517e409b | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cba89d4b9653330204e3ad62457a8ef255204b | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/717da370cbf802e64500834c98c40a963823198e | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/960d3ab3b9fd6dd5f296290c96e7e1a4e1237031 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b74a446feb70cd317e3436adf27c081c8c01baca | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3661325262b9ef47c6987d6a157b9411c46be73d | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd4604b79cdc41c25275fd69308ad3d5a65d5ae5 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e8e4a30dc307b4e39f1eccf6eacd53d499384ba | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/365bc57a3c005e9ef95941bdbee536c90351037c | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c54ba9526ecf692c0b4211d1333e38b0be0235e | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3f9a2e51c3490d2af17a45382e7a0b2700078b7 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/347c2ead3bc4c65bace3d24a78be0418ee9c6fc4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d5768ee6ed410a52eeb31109d6c951bca75e24 | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/790c56ba756f7b2727dc42cbefdc4ce1ad73aff7 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/70b8d82e70a7189a371b61c2e5b004a3eb90bc3b | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/634cdfe13c3732cd50fdbf6da77e64f42eeb3d80 | sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/0d0bc6318ba9bc7effabdb7297f3e8023b3d3806 | ORPH sh4eb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/539f930a2b118b6ebd278b1012b39b8efaacffed | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc116876aef07804bfa0d080cc834ecf605de191 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f2e80095a7897cbc77fcf4158744dfcd58a0f40a | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/d2d9b9f2d5f54bf6c8efc472c1ecf5528248a3a4 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/bd2985ff1abd7c2e87901eb3ae48a3cd55a753e6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/49d337e820aec5753b8354ddc311ad36679140fb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9b4fc62db244d5e5717b3c0ceb5f08dd65a43255 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ec2d5cc354c78d44b3d54258a38f73cbe23342e3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cd5b18af08d3904c48b70c27978cb14fc0cfb457 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/578a8ec0c70d9bfa6e55ab30bac97ef9e9b47483 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/3f4ce666e21572b9be30b274db062488f9598d21 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2507575c2748dc37bf93f050e6538cd10b8ac8a5 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5037854bcbc6bb911746497fc425a9fd60413da3 | ORPH sh4 | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/84ae0e835458b620061480a1cee6d7073662fd3e | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3d6268c1f192b1c77032a668083f59e05f8913d0 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/82f93f6c46d80ae83f3b6b8c8d619f66287a7db6 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27165bbd6f26db75f81bf8bb503acb49b8886c91 | mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d81739b9a6dcbfab1a6b8d9ca53cf1b01e9804fe | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5cf6ec0a439e24a6233243571b5e5be8ffe78725 | powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d81e1a753bd5f58ca5bc13e4e98494bf60f08ba3 | powerpc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/79b4abda6f11028dfdc98aa75ccf45cf0f2dbc16 | ORPH arc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/ced239a117dde440a860a810bb41711cbe0f6aec | ORPH mips64el | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/48627c5f6c60270c397e475147c492575ea2a355 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/6ab211eda5c44f8874d5dcf870dc3aa84d7f3522 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/92c5bcd037e2db08f4235efe32b81ca19f1f717a | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/91bd438628c90501ae09620a11e94023f2b310d3 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cc4bf8840065d44d17cb5d839b3755002ac53e3 | ORPH arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/82ae6de2b3bc229842f6e0a2998c898e089220fb | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/66df85003589bcd46a02114796b1e2379df3ff18 | ORPH aarch64_be | micropython-1.19 | NOK | http://autobuild.buildroot.net/results/268774989beaca5743def80ce537e78d541bfcda | riscv32 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 | sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d5393ebd89661d828e4b49419dc3243fea942dd1 | ORPH sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5e73f06d67648d4509f360f9d554d7c8a8a9c06c | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/98792a0d9c7bdee7cf69496a72c0755163ea672d | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/4a463c951a104bad8713300fd194241e7ab0400c | xtensa | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/b39191876e8ea0871c811e3124c02f2c8fa93d50 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/485de47b0b5705fd536e41ef39cac1ea0cc580c5 | sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4f8b3e84866682b55de9158da0fee181f8f7bd8e | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4cd768ae7816f0f013a52b5e767b51bd96128953 | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/39bd45498d0f77ace2051e7e8efd31dded8483df | ORPH x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cf1eeccf63591e723967dbc559fa803b24087520 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2bc4a5cce9ff3c648a2869639cc9bc1ac4bedfd0 | or1k | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/ec4ea4cd308ec0c7b255f82139d98dc8881b04b0 | powerpc64le | pimd-2.3.2 | NOK | http://autobuild.buildroot.net/results/3718e26cfdeccd5944ad597317410670b9d06906 | m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/70fa54bfd4f3fed1c81f975b1ba096f9801f2841 | ORPH m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/16cf60497350567e6ee572351ad7873420b5dfb5 | ORPH riscv32 | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/01802ca182687fb2bb543872780672fe64dc93dd | sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/d72a9529429e83f69d8c7764865b989216f82b74 | ORPH microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/8a904d8a2fe4dfd2c5ed05a56d6b02a287b0a0ca | arc | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/f605a8f96e0ed6a012334fd1bc670be66f7c5ce3 | arc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/56a699cb30d8e5e289458941fa31cc005b0a2a71 | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c813606c590d73d2129a8b646e4b939bd9dd9660 | arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/134087dbff1b34db48ab750143b525d9a0383eee | ORPH powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d17d696d92876910d10785bbc10ead714d9800e0 | ORPH or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9b4a6d7473f9e66d93451cdc957ed9d21a759dd7 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3dc8eb0cbf842b57acac32a6903db67d19be7f41 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/4ae8c2b6fb85ede0441f26060b41e2e165c9c229 | ORPH mips64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/32d32af179bb65d5b1e6a0ffe10b424766201147 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8f497a06ce2f0490a0392ecc61241f16f8ca25b2 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6aaf002b7ae46f34bdbef2ac270abc3498c54164 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/59febc8843f821d9ef05ebb9d0d73d8a8fd47f7f | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8fca67980583f55333c451b2649141c5501cb7dd | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/88c9fa4a638eb68b3532b60fac8a8131da0a417f | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022c5748bf45d8d0b7bb3989b10582cc466f5af5 | ORPH aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a665c3ffc25ed125bc3ce945a66ba0ce89a87290 | mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7a258b4c8833bbd824d51bf3142ca93413677b53 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bd26fdf3163cc517c5e1b577a69d236eb21509ec | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44004a01a7f51b923ad43aa4dafbfc0ab2403e67 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e75c0a861c1573213f02f32a151772e60cf88db | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1ef855350a6fee35517e945efdda30746da690 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/76047421e7d9c79b02586b7d045a8e2eb747c9de | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5d67dcb26bebd0b0feedd9b676d005a25a3b7476 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a3eb12f4658027f54b8d8a725319241cc8252e2c | ORPH mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/cfbf5165e398749ad8d1fd458aae0f7c69d28a50 | mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b20980176ad32312a9655f9929bc0d720d3591c4 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/47cc493eb1421a4de6dfff7dfb7dfb3f30a0e702 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/d543de55a4fabdf59497b293dee2f6d22084fe85 | mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/94c25fcd43176197cc30b2a9a513598fe19da472 | mipsel | unknown | TIM | http://autobuild.buildroot.net/results/6945d36c9d3cf73a011e8cf6f96153ff8d847f53 | sparc | unknown | NOK | http://autobuild.buildroot.net/results/09ea50a1ef10edb8a5e6a6890e9945e81b1aff7e | or1k | wampcc-1.6 | NOK | http://autobuild.buildroot.net/results/83efdd2c0b14d89e6304986cd26716be680723a0 | ORPH mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c9aabe19e7c3f048f4a11cdffd6a44d24f444c05 | ORPH mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/281e35a765b87334d51e268a2b9a475ba134de68 | i686 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/614ccdd145a34245b4709fd123275de7a4469c5d | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/886953ea2c98983b9a46660e4975b1837b18804b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/68c23c82c647e333df9fbdcc762158454cf052ef | ORPH aarch64_be | znc-1.8.2 | NOK | http://autobuild.buildroot.net/results/5f4569df073779ebf8e975a45db1dc36f20742f5 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/09d720ffc4f204a28f0f8f9bdaaaefebfd15a07e | Classification of failures by reason for 2022.02.x -------------------------------------------------- bat-0.19.0 | 1 igd2-for-linux-2.1 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/cb9acba896fa13752389d12f19cbb66f0a02ecb6 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/30881ec6d4fc9f89085322b48da8e5a0da0073ff | arm | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/db0ec450302f68c9296df20413199aa67a7f040e | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-rust-1.62.0 | 3 dash-0.5.11.5 | 1 host-gcc-initial-12.1.0 | 1 host-pahole-73383b3a39afe86... | 1 memcached-1.6.16 | 1 open62541-v1.3.2 | 1 pcsc-lite-1.9.8 | 1 python-sip-4.19.25 | 1 toolchain-external-codescap... | 1 unknown | 1 xxhash-0.8.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d665ea8ab6268e005771265c2624c4043904db02 | ORPH x86_64 | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/4348a0689297f08acb892fb2f2a08e8ed5e63498 | i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/895f6959611517f8d99ee65f7e3ecc4ba7517402 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a2b720a935fafc7ad1b8489b5eddf167f73e7e62 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/98ff904509a1ba8b798a528a98ba927a9a377efc | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/67ca94f3febfb66f70638878e0d9f5f0c56de08c | m68k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ddbd4c53aaa695c29803da1ac139d780bf2819a5 | ORPH sparc64 | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/c90412a1debbaa80dc57054f30b1768d48e14412 | ORPH arm | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/bb5e7d4021c58d7a357ce39338ba317ab893f3a9 | ORPH riscv32 | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/521e5f6becebf76d5319125ae674c11d19c27636 | mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/891c0be7bb164c0f03ef0b6bf59300293d5ec3de | ORPH sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/07a9b305257eb99fb60538a74134927d36ad7356 | powerpc64le | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/475d838916ea743f390f365e13acb87d1a27eefd | ORPH -- http://autobuild.buildroot.net From jesseevg at gmail.com Wed Oct 12 06:43:53 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Wed, 12 Oct 2022 08:43:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6: Change license hashes Message-ID: <20221012064353.454369-1-jesseevg@gmail.com> There was a major rework of how licenses are used in the Qt codebase along with a new location for all licenses, so change the hash file to reflect these changes https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 Signed-off-by: Jesse Van Gavere --- package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index 5dd26973fa..b004347a5a 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -2,8 +2,13 @@ sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSE.FDL +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb LICENSES/Apache-2.0.txt +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 LICENSES/BSL-1.0.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc LICENSES/MIT.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index fb1b3dcf6b..887f67b2ae 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -2,8 +2,10 @@ sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d LICENSE.FDL +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt -- 2.34.1 From dimi at tpm.dev Wed Oct 12 07:54:22 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Wed, 12 Oct 2022 10:54:22 +0300 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 Message-ID: <20221012075423.14729-1-dimi@tpm.dev> From: Dimitar Tomov This patch series bumps the wolftpm version to the latest available and adds one new config option for controlling debug messages in wolftpm. Signed-off-by: Dimitar Tomov --- package/wolftpm/wolftpm.hash | 2 +- package/wolftpm/wolftpm.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash index d24df58eaa..e256967a01 100644 --- a/package/wolftpm/wolftpm.hash +++ b/package/wolftpm/wolftpm.hash @@ -1,4 +1,4 @@ # Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolfTPM-2.6.0.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index 7e8a108585..f217322545 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFTPM_VERSION = 2.4.0 +WOLFTPM_VERSION = 2.6.0 WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) WOLFTPM_INSTALL_STAGING = YES WOLFTPM_LICENSE = GPL-2.0+ -- 2.27.0 From dimi at tpm.dev Wed Oct 12 07:54:23 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Wed, 12 Oct 2022 10:54:23 +0300 Subject: [Buildroot] [PATCH 2/2] package/wolftpm: Add new config option to enable debug output In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: <20221012075423.14729-2-dimi@tpm.dev> From: Dimitar Tomov Signed-off-by: Dimitar Tomov --- package/wolftpm/Config.in | 5 +++++ package/wolftpm/wolftpm.mk | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 7ebb253857..4e712d0afb 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -35,6 +35,11 @@ config BR2_PACKAGE_WOLFTPM_NUVOTON Enable support of TPM 2.0 extra functionality offered by the Nuvoton NPCT750 chip. +config BR2_PACKAGE_WOLFTPM_DEBUG + bool "Debug output" + help + Enable debug messages in wolfTPM. + comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index f217322545..398fa668af 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -47,4 +47,10 @@ else WOLFTPM_CONF_OPTS += --disable-nuvoton endif +ifeq ($(BR2_PACKAGE_WOLFTPM_DEBUG),y) +WOLFTPM_CONF_OPTS += --enable-debug +else +WOLFTPM_CONF_OPTS += --disable-debug +endif + $(eval $(autotools-package)) -- 2.27.0 From peter at korsgaard.com Wed Oct 12 08:26:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 10:26:45 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <8735bup3qe.fsf@dell.be.48ers.dk> (Peter Korsgaard's message of "Tue, 11 Oct 2022 21:19:53 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> <8735bup3qe.fsf@dell.be.48ers.dk> Message-ID: <87tu49o3ay.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: >> This is currently the latest version in the v16.x branch. >> Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations >> to resolve conflicts with other unrelated upstream changes. The other >> patches are simply refreshed. >> The license file is updates due to: >> - Reformatting changes >> - Addition of the mention of some files being under GPLv3, but it's >> only the autoconf machinery: aclocal.m4 and config.guess, so it's >> not relevant to add in our LICENSE variable. >> - Addition of the mention of another file being under the MIT >> license (install-sh), and MIT is already listed, and this file is >> anyway only part of the autoconf machinery. >> Signed-off-by: Thomas Petazzoni > Committed to 2022.08.x, thanks. I forgot to mention that this should have been marked as a security bump given the security fixes it contains: https://github.com/nodejs/node/blob/main/doc/changelogs/CHANGELOG_V16.md#16.17.1 -- Bye, Peter Korsgaard From thomas.petazzoni at bootlin.com Wed Oct 12 09:36:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 11:36:34 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-10 In-Reply-To: <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> References: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> Message-ID: <20221012113634.1ae5d496@windsurf> Hello Leonid, On Tue, 11 Oct 2022 14:11:10 +0300 Leonid Yuriev wrote: > Please fix the configuration error of toolchain for microblaze arch. > > I already wrote about this problem at the beginning of the summer, and > then changed the diagnostic message to make the error more obvious. > > Basically, the failed assertion (see below) checks that the width of > l_start end l_len fields of the struct flock are enough to hold values > of off_t type. > So, the libc in the toolchain is misconfigured or/and has wrong layout > of headers, etc. This particular configuration was built using the glibc C library. If you believe there is a bug in glibc, I would suggest to fill in a bug report at https://sourceware.org/bugzilla/. Thanks for your help with this! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From neal.frager at amd.com Wed Oct 12 12:36:51 2022 From: neal.frager at amd.com (Neal Frager) Date: Wed, 12 Oct 2022 06:36:51 -0600 Subject: [Buildroot] [PATCH v1 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221012123651.4218-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware It will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch enables a pmufw binary built by petalinux to solve the issue. Signed-off-by: Neal Frager --- boot/uboot/uboot.mk | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..136cd9e306 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -392,8 +392,17 @@ else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) + +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) +UBOOT_ZYNQMP_PMUFW_CONVERT=y +endif + define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), + $(CROSS_COMPILE)objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From aperez at igalia.com Wed Oct 12 13:05:46 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Wed, 12 Oct 2022 16:05:46 +0300 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 In-Reply-To: <20221010064610.388468291C@smtp1.osuosl.org> References: <20221010064610.388468291C@smtp1.osuosl.org> Message-ID: <20221012160546.GC2476394@igalia.com> Hello, On Mon, 10 Oct 2022 06:46:03 +0000 Thomas Petazzoni via buildroot wrote: > Autobuild statistics for 2022-10-09 > =================================== > > [...] > > arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | This build failure is due to an internal compiler error issue which I have seen reported elsewhere [1], and the fix has made it into upstream GCC: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9bb20299ba1d1cc3bbd83a07a777fcc5a93cfeb0 GCC 12 should be unaffected. What is the best way to fix this? Should we disable the brotli package when GCC 11 is in use, import a backported fix to GCC 11, or...? Cheers, ?Adri?n --- [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/398 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: not available URL: From giulio.benetti at benettiengineering.com Wed Oct 12 13:17:14 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 15:17:14 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 In-Reply-To: <20221012160546.GC2476394@igalia.com> References: <20221010064610.388468291C@smtp1.osuosl.org> <20221012160546.GC2476394@igalia.com> Message-ID: <57364e0f-3e7d-d056-60f0-f935395d82ca@benettiengineering.com> Hi Adrian, On 12/10/22 15:05, Adrian Perez de Castro wrote: > Hello, > > On Mon, 10 Oct 2022 06:46:03 +0000 Thomas Petazzoni via buildroot wrote: > >> Autobuild statistics for 2022-10-09 >> =================================== >> >> [...] >> >> arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | > > This build failure is due to an internal compiler error issue which I have > seen reported elsewhere [1], and the fix has made it into upstream GCC: > > https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9bb20299ba1d1cc3bbd83a07a777fcc5a93cfeb0 > > GCC 12 should be unaffected. What is the best way to fix this? Should we > disable the brotli package when GCC 11 is in use, import a backported fix > to GCC 11, or...? You can try to work-around it by disabling the optimization, check here as a reference: https://git.busybox.net/buildroot/tree/package/brotli/brotli.mk#n20 and to do this as you can see you have to add a gcc bug like: BR2_TOOLCHAIN_HAS_GCC_BUG_68485 Then, since there is a fix you could backport it, but the problem is that external toolchain won't have it so it will fail anyway. Is this gcc bug present only on gcc 11.x? If yes I would only add the workaround. Also you need to check if gcc 12.x is not affected anymore by building brotli package with different Buildroot Toolchains with different gcc versions, like gcc 10.x, 11.x, 12.x and see the result. This is at least what I usually do. Best regards -- Giulio Benetti Benetti Engineering sas > Cheers, > ?Adri?n > > --- > [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/398 > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Wed Oct 12 13:40:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 12 Oct 2022 09:40:05 -0400 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-11 In-Reply-To: <20221012053648.B5A9540519@smtp2.osuosl.org> References: <20221012053648.B5A9540519@smtp2.osuosl.org> Message-ID: On Wed, Oct 12, 2022 at 1:37 AM Thomas Petazzoni via buildroot wrote: > > Hello, > > Autobuild statistics for 2022-10-11 > =================================== > > branch | OK | NOK | TIM | TOT | > 2022.02.x | 10 | 3 | 0 | 13 | > 2022.08.x | 12 | 13 | 0 | 25 | > master | 100 | 752 | 9 | 861 | > > Classification of failures by reason for master > ----------------------------------------------- > > glibc-2.36-44-g2628500f5dff... | 375 Most of these are due to a glibc make 4.4 compatibility bug, started showing up after I updated make on my autobuilders, it should be fixed by: https://patchwork.ozlabs.org/project/buildroot/patch/20221010003515.796446-1-james.hilliard1 at gmail.com/ > host-gcc-initial-11.3.0 | 32 > bearssl-0.6 | 30 > host-binutils-2.38 | 23 > ca-certificates-20211016 | 20 > crun-1.5 | 14 > coremark-pro-1.1.2743 | 13 > host-f2fs-tools-1.15.0 | 13 > host-sentry-cli-1.59.0 | 12 > berkeleydb-5.3.28 | 11 > brltty | 8 > libglib2-2.72.3 | 7 > dieharder-3.31.1 | 6 > flite-2.2 | 6 > host-gcc-initial-10.4.0 | 6 > host-gcc-initial-12.2.0 | 6 > slang-2.3.2 | 6 > efivar-38 | 5 > host-binutils-2.37 | 5 > host-gcc-final-11.3.0 | 5 > igd2-for-linux-2.1 | 5 > libnss-3.83 | 5 > sdl-1.2.15 | 5 > sysvinit-2.99 | 5 > autofs-5.1.8 | 4 > btrfs-progs-5.16.2 | 4 > gerbera-1.10.0 | 4 > dash-0.5.11.5 | 3 > fbset-2.1 | 3 > gensio-2.5.5 | 3 > host-binutils-2.39 | 3 > host-pahole-73383b3a39afe86... | 3 > host-riscv-isa-sim-1.1.0 | 3 > host-rust-1.64.0 | 3 > libsvgtiny-ea9d99fc8b231c22... | 3 > linux-6.0 | 3 > musepack-r475 | 3 > ocf-linux-20171122 | 3 > dahdi-linux-5c840cf43838e06... | 2 > dmraid-1.0.0.rc16-3 | 2 > duma-2.5.15 | 2 > elfutils-0.186 | 2 > gitlab-runner-14.5.1 | 2 > gmrender-resurrect-0.0.9 | 2 > host-go-1.19.1 | 2 > host-protobuf-c-1.4.1 | 2 > libarchive-3.6.1 | 2 > libcurl-7.84.0 | 2 > libgpg-error-1.45 | 2 > nanocom-1.0 | 2 > perl-5.34.1 | 2 > pistache-3ec9d7c4f8b828fdd3... | 2 > refpolicy-2.20220106 | 2 > toolchain-external-codescap... | 2 > traceroute-2.1.0 | 2 > uclibc-1.0.42 | 2 > unknown | 2 > xenomai-3.0.10 | 2 > zlib-ng-2.0.6 | 2 > /home/buildroot/autobuild/i... | 1 > /home/buildroot/autobuild/i... | 1 > /home/buildroot/autobuild/i... | 1 > 4th-3.64.1 | 1 > ace-7.0.6 | 1 > apcupsd-3.14.14 | 1 > bat-0.19.0 | 1 > batman-adv-2021.4 | 1 > bluez5_utils-5.65 | 1 > botan-2.19.2 | 1 > casync-4ad9bcb94bc83ff36cfc... | 1 > check-0.15.2 | 1 > dropbear-2022.82 | 1 > erlang-22.3.4.22 | 1 > exempi-2.6.1 | 1 > fdk-aac-2.0.2 | 1 > ffmpeg-4.4.2 | 1 > fontconfig-2.13.1 | 1 > freeradius-server-3.2.0 | 1 > frotz-2.54 | 1 > frr-8.3.1 | 1 > gpm-1.20.7 | 1 > hdparm-9.63 | 1 > host-delve-1.8.0 | 1 > host-gcc-final-10.4.0 | 1 > host-gcc-final-12.2.0 | 1 > host-gcc-final-arc-2020.09-... | 1 > host-gdb-arc-2020.09-releas... | 1 > jhead-3.06.0.1 | 1 > libmdbx-0.11.11 | 1 > libopenssl-1.1.1q | 1 > linux-5.10.145-cip17 | 1 > liquid-dsp-1.4.0 | 1 > memcached-1.6.16 | 1 > micropython-1.19 | 1 > mmc-utils-d40ec535b9d4e4c97... | 1 > musl-1.2.3 | 1 > php-8.1.9 | 1 > pimd-2.3.2 | 1 > poppler-21.12.0 | 1 > procps-ng-3.3.17 | 1 > quickjs-2021-03-27 | 1 > rauc-1.8 | 1 > sdl_mixer-d1725fcb7c4e987ae... | 1 > systemd-250.4 | 1 > tealdeer-1.5.0 | 1 > uclibc-ng-test-0844445e7358... | 1 > wampcc-1.6 | 1 > wavemon-0.9.4 | 1 > znc-1.8.2 | 1 > zstd-1.5.2 | 1 > > > Detail of failures for master > ----------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/790fd9637c8bbd353e6d859db64c854fe2a4fad9 | > arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/84d2518c75cbb6a617eadfc40f9ffa042aec0989 | > aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/143430b6f17256fce77453ba6e24c7d26517cb11 | > mips64el | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/ca03fa3bb1cf32ff8154b382d5c4dd5f9bd71939 | > mips | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9b7d88d647c151df2c8888ccef4c2681d9540534 | > sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/562031e3a06287ed544072b3b40e1e98460ea53c | > microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad184e25dee469d5573b0fa208da3fa888100e27 | > arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/151970c0dd2b244a1983dc08033581342c787e9e | > sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3203ad10ddc5a382590635e005401f54469f0c4 | > microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/17ffbb1cc5b104c9a090e999cbb91b2648b60369 | > arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c539423c3f79298e0ccd32f6d0dda7ebad376638 | > powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/de42234cdcfc5310bffdbc9c46d05f6a3e5586a3 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/99205c6394261837a42dc30c488a3b25c4d0a44a | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/921a75548209405ac869c600fb5afa67968cac47 | > sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f41594b362de9d1c51534c91ba8b9d60703c5d6 | > microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6bf0f2c716091e3503200a2d4ba7475b021a58f | > armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1831be6c2a55e4ec9ed0cfda464f9ccfbeb96e53 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/85fe224a559e9cca3abcbeb018988d342183f8ac | > powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/295ecd7d8630bf4ee77814873f0cd413bc4b77d8 | > sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6d9dac7e28093a40596baef54de42eb770e1ea3 | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ee2e174a7635d90395603289675432df00b5075 | > riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0d9a69a014a3deb4e6caa879d2b0224f100b6414 | > powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/703d2dba1767f94150bb36333adaaba2cefec1c6 | > powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ab5fe6b3fd7cfe71e961b330b027995d834a5ea1 | > nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a08032c678483768ab0839c176134c29838052fb | > xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b354baad99fda87f88318abed8cfe93435f8c2b5 | > i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/389a7e8dd448e01c5088793e59be1354864a3a8d | > sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ae510ca630a71b9f459783ea0901c8bbe9efddef | > arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6b8cfcb36bc32e39fa9f6ee539915e3fb430cd2e | > microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f1f1810cca2f7deb5b311bb19668adcc301c8e1 | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/317820f04974e3a712808385c18a82c15af36431 | > aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e79e9ad340a043f09f9e0c891250bbe04ca343dd | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/34a33d647e7e23d8640368fa20a87d5d318e5f9e | > or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a4ac22c7fe2377a338b4a5e0e607f4ee9dc7067 | > mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8cea6e3c052768f2a58baf1a389d9b1cc3430943 | > sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c786e3a89b930480e60b14377b2a01261604dccd | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a597c19fb8cdb2acaaa9cf0721741ada3e874e12 | > mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/35d0f632942150edd040e17389199ba04d92beed | > or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56bb0b11b0c18c2f6cd93f5714db69098532dff5 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dfd85db7add2ae8f5568b8c5eb96c7d5ebefcb99 | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/23fbed310b2e18db46677c919f37a4f980410ff9 | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56be9856023e6526c33cfc8244c91cec8de7ce41 | > mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/feb913606e115edb5031619d3c419e2d4a379961 | ORPH > arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1006246752ac677682c2438c506854aa64db5a10 | ORPH > mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/99928f58d16b54b42f3f6bd5280d0e43e6359cc5 | ORPH > mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/19679a8648dff153b728df3936bd0dccad376c5c | ORPH > aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/921a0fa9b981e74c658f5e1f48fe5ac31e57a0e7 | ORPH > sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/780c30d345a0540c4cf473bc9b17f3844530d23d | ORPH > arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/13df746762d022684d37bfddb4114dee3bdc1987 | ORPH > m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f63738733d11095a358d63567299827c08662083 | ORPH > or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b7c6b02b1afdf2b9f4c4182bee9d17cca8a6c775 | ORPH > powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fb9310781efa54fefbc55b1a62e0aac606047869 | ORPH > powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e4a5e4b469fa0086e57f0cc9add62c77e147e3eb | ORPH > sh4aeb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/deb27089f2c94969383d3acddb6e4d8e5e66c16a | > aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/1d886c3089d67e8907dcd61075c0904e93e55f01 | ORPH > sparc | brltty | TIM | http://autobuild.buildroot.net/results/cc51db61d23c5553ab8489c241154ef4dbffdc3d | > mips64el | brltty | TIM | http://autobuild.buildroot.net/results/f37b7d3826505699989f833e08494e5e5ff8e834 | > powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0346a2fa4ecf51196b2c3570362affa30f1f2b24 | > aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/4dd2d28f946cdaa83d0d5acb4795f260424a578b | > i686 | brltty | TIM | http://autobuild.buildroot.net/results/0d810013e82d88e7e052a913103462aa7b9a3388 | > armeb | brltty | TIM | http://autobuild.buildroot.net/results/3a7fcc06550a3bdf902d0aeafcc7de93d50f358a | > powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/329e426588507e977a329ab9013d8cc1268dbeac | > x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/261ffa03a739ce689fff825b355a36b20a2f0145 | > aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1ba1c19c2e5e8630c8633f326073eef8b6ede5e8 | ORPH > x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/97f96b4e026c6165cb41238a5d5f92fc70020ecf | ORPH > arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/24ce03d937582846b93500a86baa10e6e1aa8e25 | ORPH > aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b7f2827712a35b78039bf556aeded9f6dabaa796 | ORPH > microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bac3dccfbc9bf3048e7c551b30a0e1a4302e8152 | > sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97701df77fc1dbc7ab7dba521a76ca3e38dd8912 | > mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/93767e568b51622ea3d4a95afb411384a578a5f2 | > aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a2f5f4d7bd6cdff954672c79a1611edf15265a0f | > arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a72f7e0dccbd469fd51d377f645efe366e5a3df0 | > arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9fc3111c5ef6d606c14c109d82a845cf51d5965 | > m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e79f9b6d2a4a94ef933c77abf781a0a31ae46813 | > x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/edefc59ddb4cd65509f6ae2cb9f6fee5ba6837ef | > aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/537da7f95f7b37031d7143d13b36fbd3a4f97acd | > arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4e717e47839dfb34487c7b186636e03efb1544de | > xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9b7935e00f3494cd16bbf6461a4f87eb0b27ce59 | > mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae35248b608d6ca5ddec053090eba4d61813cc78 | > arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bdd3bfe442562c59c7ef9792715fa6d1b4017f66 | > powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b1b1a3f32ccb4bbad188034142b10bfb73bfe18 | > or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a06264c8fd1cc718ea0e4fe9f876f27831d8c765 | > aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fd8aff30a8e5d726b6d2d2ef532bf412df8f58e5 | > mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d7206649f7beef443c5c063e76d1d9aa07420ad8 | > powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c9fab74d89d42e448f4a047d5e485533bf32cb0d | > mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2ac539fec76900f7e1bd3bbc7ecd04348cbaf309 | > riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1c68f8e1067f90ca9f44788f6d5c701d298010c3 | > i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2aa328c22ea6ef21a8f8a6716bf92c47b49fa685 | > powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/3272f3c49d9d078c9e9ad4ae3c57476fde30d52b | ORPH > powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a4ce2bf5da54beb72064b143a75050a439208d33 | > sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a393838e5bde026441d3283c1463dade0983e56b | > sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6112a60828ac6c8765f9f93603ee30c928c2037 | > s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e7583a8e6feb62737b229ad5a09e2c1baee01baa | > aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a1b0462bc20f791245d0b47051a9a478b94455e3 | > arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2b8e33beead0c006b3d2b2264fe125d6ae670940 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/62ccf8eb674edd2bdd5e39f37bc7c17cc94e3ab6 | > arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d67adb8ae6b8696173544d9bea097013951c3cc6 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/69b525ffbbbfefc6d5f8b51bc1e5cff64e99e7f7 | > sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d55fa9f049882c33c2bbb977b919c3ea70f33a91 | > m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/01c3cffa50d7ab7cb6dfe4480a921785a021e7f7 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7e4c74c23cc44326e817aa49591158edb0ae09f3 | > powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cb071dc01a3013177f61d42df091c989d1bdb60f | > armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/839a08988aad929fdc913372eda4cb87b4835ace | > mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de4548e9f67521282fd613fdc03ffd3b3ae6a8 | > microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20e2e5527bcb40f3abda961c66a0061ef3c4e82 | > arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d865eaea5fd7065770edc925e96c825538fb5ef8 | > powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2f3adef20f6e97ce847b89341a4072d054287c75 | > sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aa6a1b08eabdbb785ecda23b835c27d5ddd6a696 | > arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb51bd98aada4fa235509f0cb01a53db24860fb | > xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29a152c67e14984621088524ba3bbdfa7ccfeb76 | > xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/18fcc3777a162bc13e296b5dba76288b084ebfca | > armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb53c8cb6ad0143acc60ab67d4f42410f0ad27c4 | > mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b51c6e7b1c07129ec291a90b6414b640a3243a77 | > riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cf4eb323c8898426b209b638fd9a16799cf9579 | > or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/484127fdc4bc9a83456e72a88fdabb89454b919c | > s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3a8f09086d881d6462b8ca2746a502d6bc1846e2 | > xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5c2d0b6493ffbf52e9627e5d65f7b80681d5869a | > riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8a957e8aeef0400a49f057d0587d3d5fdb771849 | > powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a2bcaf4556ed797dd8c5b622bb0c33c17da4afe9 | ORPH > x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e4c6830e947fc9a01bf03fcc85490e15864bb0a1 | ORPH > mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/045a4049ae7bb2e7000feda1a3afb17b69f0d2e8 | ORPH > arceb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ea7b9e130c7c82933365e66ba7a511731b71beff | > m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7be8b87cae2f75f5fe836a04df54b72a95be780a | > microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d8a62b292b68076f4ee1032d6ff58ff5b6fe1013 | > arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/2df0e815574d5b1e228a4854d502599a5523c757 | > arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e832f4c0e39fb879d243a908630af9ec6d6eae4a | > xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3170cf77eed465ed6078be52b08e2c90bc326732 | > arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99522bdfcc195585aafb40d738b95d1e5c9e5980 | ORPH > mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0ef821cc9f725d0812bb08f5c28a5c486688cd02 | ORPH > riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/50a6580fa85f87ddc6b4ba69dde0c7ced2ce6d71 | > aarch64_be | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e9527fda55c5aede1a998f87077314f5436793b9 | ORPH > arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4504eb874b6327efc587b0ccab9ea9a0b3baa34 | ORPH > mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/afb2d3014e60410a5c08cf02ff1a959bc8ff4ef3 | > x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9ff45e12e4be0f4254aa7034ddfbc2ca0cc91956 | > i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a9e8b584fb65ac475db9ccd362323ac74b49e1f4 | > arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/b45c7b3c6d15a37846165f14a14ae95e8ba1bc25 | > aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/72004e0791681dc8beacf60cde1056a1a83af177 | > microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6f440ca4d36579026ea8d1fd45d8f80dd17f093e | ORPH > microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2582d40ccefd446fc347bd1388ce92c99a0f82ac | ORPH > mipsel | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/b227bf90f6b7c9fe3c779045f8cefcaf3c152fb2 | > mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/53d17d65c80dfcc1799592de7aca618cca2c3e20 | > arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3f5d5e7fbc07e534918d0109953ed7a9c458243a | ORPH > mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/993a2397c4ec92d2c751efa9d115dd9b2c43fe19 | ORPH > or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/709e7c4025d027766bf65d1195baf49072a87750 | ORPH > x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/11a56833280bb781a175746977a1fc5ab59d5499 | > aarch64 | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/789215d1a24ee66cd8ec1e74eafe155838b668e1 | > nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a5069e0c7dbf4d74d8c2395ce874bbb5e106eb25 | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/ed0a326f68c429ea95da0b8b0376454b7e39947d | > or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a17130de81e242eb9fd34a95b5e27b834021da6f | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4e3962cbcd7ccb22f8b6093ce6ed7fc7e0c2f139 | > or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/c06b42efcd0da915da740fef3fce0fea1f05aef2 | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/eeeae56a9723bef13b397167ca433cdd2cf933bf | > riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/16f0f845d3f84823c0e7e9fa9743f0f3d8a97adc | ORPH > powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a24f98091db6bb0e890feb72638b96d3c32cda07 | > arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d0332c6b8d3253214e0c912a36dc68d56d0b5eb0 | > arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/d30d43a9cb694555e79f8bc646ea8dc9ea2851dd | > microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8ed57e6ba7354cb8dc2ef9bacc81f82ffd0dc59c | > mips64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/afb47a30e019eb171851ece2c2c1b4cdfd96cf33 | > aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d0f1bf9784436978f0fc3abe30ba43f6cccafc30 | > powerpc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/96e40521e06da675e1b3bcd8452d169b6f5309bd | > aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/926a4ee20ea69e45156c78a7f78bac962ef9d55b | > sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cd7b1f3b5fb868a85dbcf8af0ffdd75674bb5f2a | > sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/252716069f100a0e8161beb909ea303d47526b73 | > x86_64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/aec701e2328411817b19b6c85c2e04f5bf0e9cc4 | > riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/a5f06c86470af298491e359a1c667a8677dd2e54 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b8449ce4a0701d6b6853f0a684985d4c6abfa97 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d3ab471b470540dfb0055f3942002bcf697624f | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bab8058e8a6ad545e0a85f19a6521287b3b6eda8 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e79a959c4c81dd0cc660d3c82f36fd84003e1c1 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be0f3a99ca1135d1d64971b71051e7c686866497 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6100b93bd310d24df7b9f5f1091a767ae666f427 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d14af6bf6cc3cf219fcdce86e19d92cb4a757e50 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6bc19f452dc73039467420ac47c01b776fdd36e1 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ec083468463bc4fc50a21066018cbc73fd54503 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f41e97f808785401b708e795b8423b21d19991f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7994d0025251175e4243701171a6b7210b8dbc16 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/197760dbbe212de2206e842c152a3eae100611ef | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/579408bf8be26c705ee623603f4cdfd650286957 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5426e18f67c88eb70fb3d1188c876a9c28da995 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/227b55f86346bb802e07be5f3be1f3a4060481b6 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7e191fd726ab704cb572a9aa235aa93eb87403f | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/824fd54cb9fd6809164860da9838a86389283e5b | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc0cd8fd99099e557ef941d0b62b890d99cb073b | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a755d5edbb57adb4bfe390bb2d18b10fe910ea | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/869daf57e80d3d3cde4b8696e7b6e63f635dc06b | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce5a7463d1b835868a3dbad0e41069afc3f9ba79 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0043357ab7ac15e35f70613f7cd0229e472023b7 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09e49a679e03b5ab3bf1ed01fe4780854ef84bc8 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fbcdb0dcf52094181b1d69be7735b04e3d30d3c | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f1f1f080ac92b67dac4265121a702bf01d606f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d10d8baf5ba6599fa65f1811d832519336e91bcc | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97eca688cd177f750c3cadca2ad1a0dacd41d80a | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f46d1496ae8da5f85c4fcaf1b4e41a0fa58387cb | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea2409526df5c15a6c13158bd0f5babcaec9f0be | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca0eb3c2dd1b12fab4f584b082013cb907f056 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e03d82c56e8c43448290aa15df69dce3453aec41 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a0eb08a321860784e995c5fb2909cc3def409d | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18f58b9f6a351519c81d2c3c774f6bba7ab7c981 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6877a9cb7e989ac24c771e21e13afb26bb1410f1 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5bffb780721763b384e84538c436d3f68e61c2c | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e67f1a5c5afe559d43686b9005158d5d5bbb30c | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6544f70979d3e542eff1e34c33e41c5c80c3231c | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fbd5d5877126e102098247265e05901b8ec8fdf4 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/132a75774fe8cf15a94861da3ecdd2d3909d13dc | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37e17c3af02d4f6bec452cdb9a783d54178fd983 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a8a904b51b5537f3ee6d94905bbc81a6638e6f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ac8095e3a920e561ae71513fabda6766546065b | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7ee3b7a9aab40f8c26042879524b52facc49437 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b2cf8bb94cedc078c482e7fb711bae8a9e3c60a | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9fc0da2baa6227b56e1577df80222bcbaecdf95 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72efc20d3df70bb90aa2a7d1502309162211f692 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a984cca0c7633d6240e5385236298a06d56ce636 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1132401325aea012031c704cfb125140881817c | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e061bb7a5a013c12491375ec0f47c8824d5ba8ce | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92cc31862fdb127a2e037bd57f0b8980d4dfbcc9 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9c676aaa7b32c3373e52fea0f81d5b5c42e6eb | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b7ca2e836f7f735af00da34ec556948e9754ee4 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753d83439e284aee147f43ce65ef36a9789c5fce | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/169c25f3d5c72ab53e50ba874ceb10807eb63771 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb5dd02f46fb07aff26abc50bd3f59dedf5fefc | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bdb0dd286fab729e28658222330f8a06df2ddbe | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f099f608ef9e9fd42fe528baacafac72218b50b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d0d3ab0b8ea3b79f5bdddc9fd1aeca5482f2662 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e517fff50e0402309f8b143991f972bc41b9a26a | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/844c28be7f81cec0288242efdf66b7feb3b10934 | > arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4357f40408a1efe90f126a7f4784af1c153629ca | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2592df306b91d3e1115efd026cd32173bcc20413 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92adf732c43cb97b96ba7a4bf383a3fcc4d83a2f | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9657daa044fd9404e4067e1419d6f5b68153d1f5 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15402c37f18d5283676b77b085489ddde6d6017b | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18062b80dfd9d3822e3ba2c440d2fc87b22d9ba4 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32071db54d552586b87b340af2083ad884429553 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b792116457696a4ba6ffd2b461cc3b81af991e6 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13c87c2db1cfcd46fdbb364eb3ed1bb053d783a8 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca918494d0ce5445f41f7f51f9bea31a5e81b2da | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b4346a4f91849f6599ee531fe789dedf88bdce0 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93da532f18bfe66025ea12e7aa225a347c43d790 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae14c6e7ae9bbb495ac4f58abfd1e76236d85b3 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0d865c91be2760b3de130790c9a03003e3444d6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/290aa1bb2d3ff882ed7b673d559a2fbe3f99dec4 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3a5db26357700cae260639c6a6d018d8a513f0 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5175dc0c2476bc3505b9d2c36150c319b49d9c84 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/811a77851fc77577c8b64a3aa383833ff23006dc | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8556b25bb120790eaf470826b74f155d80468bf7 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e8b67631dad47bceb27980653d9aa6cd33756e5 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa641b1f45cd45893b0237ee8d7acac530155a4 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a5b6e22f567f2652fe12c667c1458d907dca008 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd197803491828ecd255f178ab359dc758b6d551 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90f7fbc896d78e5db954be1a0662eec9f94efaff | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2eb56b509940eb2db2084a597cc4b3a7b889ddc | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62ff8be7c0942dce808bc3d8911b589930d62003 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/932b53100fb00ca419512b1a527d52c1a97d4060 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6556d0e82f8a07867624c7492e94608c6338927 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59e2cc31fa7583f5a88637a1b55894387a14aff2 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1e63364e83486dfa37fc53fec2ae1365b6df821 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93012f360497d909f401972dcbcd7373ef956650 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9dfaa1ef64cd1b35f469c76b91c701a2f640d42d | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ea7803178d80cf14d6d54944e2e01727434f5cb | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4aba9ea2ab12569869179cd24ada8bba3c509b | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e2498666801200e7b614250e8077afc3aca86b3 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ea1e8ae07860af9af27797d0dad07a3718101af | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320d81f4e574af1fc3d2ca03e1fd013f946cd8fb | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed4163fff6eecf41f2adb67ebbb0ff46c4ee067 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/abbc4e64ba2a3dd11a9712bc42d17067bfd09bec | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34084d48682ba7b3ffe3795eb7d9c9d6021d2106 | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80346009ac641bfbb1b3b84a9dbd673e77f43aa7 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a5982e523d3ab1b594692d1b90ab45b5499e1b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/638c11b8feb97b4a848591f01d441e1bc77320fb | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fed2af45405686f7a1d916c4a468e8dd934c0559 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fadf874a3b909dbda16e5a5ef9e740b6c841e06e | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69dbc2472d1265ba8757310766f5cc505ed10a7a | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5e8b7a6bb748491716a8239fdfe20d28732ca0c | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769b94b93bd26d200ab5a2dd0294c1592dabbb00 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e2119de0ef22de0c8294b7e3a2d9e58f8d76db1 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647d5376a2b18bb0cd7b0f22d4f9b496c13cd2be | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2695ca219a4cec71b520959ee970cfd187fe2cd5 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9679b9f2c651365426d6a3caec76ba537b42dbc1 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25f62bc40d7ada1032992878696519e515bfe9f2 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9696e19fcb9d238dadea69c807d66bc8b18ebf3 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fc22e5fb104308ab032b921b41a6bbbe7429cb4 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1e3f063015514b2e47745be6977a07e67475bc1 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0851e64d360ba5d17d328dcbf228e92d5e1dc306 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/243f0a394df612342146b23c70dcab33f31c1d24 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2209845634d2f0c5a1531cf4a259edfe04409633 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa211a6540003c246f5e21da5f1506021e0ba8c | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0ae2ecbd536714a38d60407085d28c2b4f16fb6 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8997c4b28c37f81d6c88f1ef7d71af6e1621e94f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b35b50e5d333e926122b42affc57ada1f444ce53 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e5c04cd297638fce8d0c8c23f28f6e204f096e | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cfa28ba84a15f414799c14e0a885cb1eeb03bb2e | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9617020b9699f196d5bba18b195fef6978a30220 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97d2f1349e8e9575c1c71c9b6932960fb88d88a6 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b9252a98271edc5aeb33d8f0fb6f780f40bfff1 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72280c51159770f90830d9c0ed5816dd6a35c386 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a327039176014894f7eb5dfd3788750b3fe7c502 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc418cdd590dd65dbeb201acd9f71cc0fcd24c5f | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdeea5facf85e2c5923760599aa64233ef9eaf70 | > arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61629cabf7625216807d74b7bf514dc6a0d47baa | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d544107673411caf20dd11e43126d2ac07a322b0 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d2166a12faee9992cb28207b03660d614a49bf6 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216b43be158a798ec5b42c7c0a0ebfd29a0c384a | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e7bd38d61b830b8e213e399e28175dd00c5d3a6 | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f6a5f97f1001706eb7062f2fd57a3e57a6ba57 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d11cbb2353d750e1b864d02b74df278382edb64 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e73d84ade8030478428277c4b97aecfc2522fa8 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca018cdc7e4523788ac0aa01233c09543ebde770 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b215925e91813db68fa600bf1d6896e55b02dbf | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd82425aa0f9b0e25cf4425e08401a905311e8fa | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5406b5d32a64ee82a4db1e884553e08727dd98a0 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4930f9145d6f393ac9bead727aaa9bf2a8d167d | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ccf0903e529fd2820f00376ae136c60cf4ca523 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f8f7cd96ce9cf39e344deb178dee02d062f0ca4 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3db806c0cf126018292d3d83d81410cee6379f59 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45bbe47d649018f8f156ae46d2092c4c090072a4 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/253c6b5bb66f54d5707f9a39ec3ca589d27aaab1 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3760520241b05c858c6a31c7bfc08d6f700eec4 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28897f3ada83ec56b8780a5b3fcb158968421075 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62e35a296840d2ddba7fdcabb16672b0d823e458 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/990f379b53c1166e158db161b7b13104378104b1 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0357b9f08e50108cb61b9189df77e649ba0c846d | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dcdb2193cb5aa9cb7ba8edce0e3b1fd2de32eec | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/875e7b7b234f232d02188582db5566722b7be80a | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c690cfb07c2ef73880b558524d4a9280869eab26 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ad59c3202f95607e0621ed8d88d4ce212a207c | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10e1aa871ced8acc2075b2df25d4f5f6a2d10156 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75fd8a9234691dd1d44bbfa0042313f1b68b8936 | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/89ac8837710a4df60c222509fb423f4458efba54 | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e6bfd5ec65df0286efe0c89dc703431b558bfae | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbd98e2fe401c1337fd9c0754b7dabdd220d36c1 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0c775a5a6ffbfe083974d2d3a31b8bafe2868af | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86545991d4f7d82948e21c5873b10704c3012a20 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b99875abadc907ba1d41991a423549627304a2fe | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec93abd1ef29c281ccc75e177be6740134359708 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33ac614be44a5f65bd7b9f879104991dd3e5544f | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4849fa1599c1ab0fa3886c0a4af57708ff4fa081 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8508fd20d6119c62a6bb8cdf24a927e63d31629 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c305439077dd6aa173b5ceb7b6286112284b825e | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbfc701cd352f1e8c98d92575d38f4307259f44a | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd335c2c6e7bf83de0ad36896189be0738b45a13 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10be76c03ceafd9413395ef5f82ab1828788df5a | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7c14e01ac5dba53ca4599549547a07b63806fe3 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eee1f579ee3f28c54c10c20d5f7b5818a391fba9 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344c0c2fd584c7c1a2a0a14eaf443d2e7d2289af | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f553f2232214162253c5895e56dae90f30767c4 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc54dbe6567c1a723babffa7a19f4a62edb8a28 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4333ec208784c95d2006ddf58d67395d0f357b03 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9b5b424506bc24b47add6c8b6a9f4297c9f5f7 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/180a9eac416b5f7042c62e6c69aaebb356895a07 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b8b8f7de679bc5f38472a43bdd6ea2e2360e63a | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d2395eee36661fc62d46d98404469feaaca0b2b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f33acbbdf0661e4e559a2e4f8d89ed7f4234d473 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e92cb0a382e6152ea0fb259031c9855061da07f4 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58bb073af3dd7d00dd379139b4f76d9904c3ca8 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d47d8caaea168256e17c104acbbaa33da0932331 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48ee582a4fb7b6a4cd5fa66460c689d2aa25c23b | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a36467004d2b4795851ccb306f28a3f532c3039f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b9c8c6f2c250a892468c03be626336b635e52bf | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c64cf6c663371a28b6b11596ed6603ad870fa387 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63e7b35aef8f9d982a5c64d384582655cc9773fb | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d457f6bef1d38038a30a034416f40a68a18c695e | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016bc1e129b882999032e88b738dd93a3b29af8c | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09d96d593a6d19b751c89dc150e98f41bda0dbf7 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc78641f5f48c6b4924102ff65863a98f8f0a75a | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6c247bc4b76e28067e215f2aa79be3fa805db6 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a454eda7bcec41f6f3622b9a0abc30c7130daff | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec9680834ee7249d7d67f195d7fb6907b8576a31 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6fc663bb77eec235d82269591bf8f22ba681011 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8433a6dd64879a71d995099674da505fe5db5a5f | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/026144a41cc5311b462465d3fe7f89a797206ef5 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2697b36c09706721c3e8d2fa3da87177c50b64a | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd4d671d859f1f342c9baaabd998a384471b29aa | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7639c854910f1c93b65d1eaeb73860daae29d1 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5f0dc13b581916b7c8170324e61a38994ac4bc | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb53571923f4c519b0a55166d626468a03d1f368 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770d7b4de2eceefd95da021ae216fe09aee75c92 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/808a818ad85830e76846db03c5bedd7e726921b9 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d7a2d30030198d9d78482fd6542d0bd6146b22e | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffb78b9a703d40f6d10ffeee5a8dfae55607200a | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/884df5432d1b1d06eb3f9be1b0450a169d94c6af | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/459d0fbe4dabcbf94e321e3c28c3969d4f4d7769 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b3d7c46fdf2b2809be1a2bb622ac374d84b5938 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43193f19fe9d155f60edf3aac8ae269cf7d3fbb | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75c6c863c607ac4590f760ec7f98e15bc11184cb | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bed79811171c010dc2994550cb0405f6f92e2ead | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2b1f509a2c2dd6ced12f81a46e1c2bead590e24 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/032166dc4714176a69fe15b63155fa42b1dbff34 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58e92c248e7bb244b4328b7b82452066ca12f62c | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e5b04a4214f7ac3603b293cf0c0a04abf426b5d | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1f81af6151a2049217a088be007c28457df4733 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9847d269914997664cba94a4c636cac44fb3a7e6 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ceede7520e8df238c9c34a8243afcce4120971cf | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee725f47ba28f49fbab234c7d6227d00159b32a1 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b903e5647accb5432c0a494107698c10c9e62f28 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f75b58b0a2e40e8c47c6e21355173b4930291d57 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d4eea76d6ffd50e3f7f38e91b85e7c1fc449304 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41d076a6fad75a9d698ba334af1e8feb3899a9c6 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca61886ee747878071aed7fe6a55200bae382e | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c09d6aa6b5c594f264d35f0565441555916061 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14e66b7039afa6229f4af7da10fcbb4f9e4a954f | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ced681a6e4ddd0a7720926241aa8906cabeb0616 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e518a42495d23caf8af81461dd51915a8a26d1 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e609064e0cef578ea9571ec64861e1c2fc28d8e | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0445b79cf03d39a85251cbd152656f1a9baafc8 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43970fc116801205e40f1fccace2651689baf222 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/882984b7dac01d31179bd5af3365a16ea3486101 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31c55f997dab1c58caf32729b2c97ff19bdf2f5b | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5117b26637e191f7ba23dd8d9c01e6732ec937c | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049c92068485afc0c7d248a798931f52e6e401a8 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769f694603c1cf80dcb6b1302624982a8c1adf0e | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/888d2bab0c2e352f04ee76e7f12f4632ca07cb1f | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdff0db6c799e5b079e6414d86dd95b767442176 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da2830c648efb5fd6e3871c5be4a1a72d90008e5 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8716d1e50c828494ec37e6a2ad0a038fda2cbb48 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb5ca785b41c04f0d210d51f36b587db867bdc71 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ef65ff32b03c12a80c3abe4559afe354ca0b070 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9b789130b3bccf2d95b7131ebdba0c30a6ed6a9 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4a198d9ec80370fbe1f64d079942166fee04708 | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f7f177b633a021cf7d3054f3f6f5bead0a0ce43 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/157af5e6b5ae30f1f5d1e1302d3e3932968e1321 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3feb51541fb82204300fbe4971ed08757d54866e | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d0483b954f75c4212149101fef44ca0a4148351 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95aab551f66289e146c034f878145bc4b83fdfc6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d73c08783b507e3934363782b8d17bcbd17246d | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/675857450f360a598570b1485c944ae1e5acb5dc | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e30934fa0bc715641967c0d799eb2a5b09e67ec | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dafde5108a995e51f9d4fb735599a5f46803db27 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/558e564f0716183d79140f0fc35075f4b422923b | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f7194bc7d23fc87d49e7108ee130471a3a737d7 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61c3a8cd16b83af35d0e06fbb339c116614ad888 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4d336a1b1847ee9188c2f8d1871f7e130baa4e6 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a45ec466ee0217b92b6d2d32ad64584683b0630 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f121fdc4ad9f4c1e192eec23cd385a7dee0cce | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa3704162680d5f2fdc1130027f0935d0c6a983d | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07e52aad6282c35a38add0a1cb9009b4d634abe | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/714f7a6eb03169893f4bf6adda8ef80f6b493868 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f901a2098a63a0e3a7e580c963f219637d2db680 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a92243bf390f9beb2e23a8408971313e039a0cf | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c77abf4034eb74e99e0e7ba8fe86e3fc797aadd | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4e19e5f83e4cd990ca49dc0e5b5675f34414c5 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31f6c9ed0070a156050af4e7bae6997378ca5132 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07751664b5050850e248a1519c91b4d443dcca2a | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827680dbadaac87c79d4144b7e3ed886cf46da44 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a44d30ac31f8ec2862d1da45d0b3efd6f79042 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39525562eecc21bb1da2ec0aa596cd52207d66a5 | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c33315d339a7e97e86d7384df6c4478d4b4426c | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed521f1aad450c0b85cdabf51f4ec3e52738981f | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad30eed7f49d40cea72987db017a09258fe1f0 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa305b931f8800253625a24461a9459764bff625 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b313d509ae32a8920f7dbbd69110d1811d9d2bc | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecae3edcc38b4d2465d71234eb067d27eb90b7b6 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/070f992e4adaa7f6e65c6cd3498137616f9ce398 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/044a809a02b8168ba379e0b658894003d7f524ac | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/890d413e7b788725e72a8bfbdb020f76410d05d1 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4b4fe4945c7dbb3d174897d73c9036d40011d6 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e11e849f245a968825dc755989ecea621f4c0df | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c8ea6f531626f9fef4a56fb88626900edd69070 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea928938fc6c43aa16a86b41dd7c7026a8313f45 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c88c32c98a2d839eccbe05fc509e31f0e7295e19 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e90e9e7612fc5964737a39dcfa3133ba3ad2a70 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad1b4736eb8f6d23b094534100a65b3f16242953 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478b24fd23d07f835fd70f199dadd7cbd15aac00 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/000979ccc0f49698558facf6d771bdef3f07a32f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86e2e58b20f60476e5f37a35d3e5be1b426b643 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9550f5080c0bae5d4dc2f2aa41aa716748bf5e41 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85a45a1026d97c9ab54ca4fefc6effb3ebbbbb07 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b0b6257786142166a8837fdac3660c63b506395 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de125da38e98d14e68ae60e05addcac2e073971c | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e41bbb45e47515e730439088e773202dc17d322 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a3a0d1ab972bb4adbba53d043267888012d829a | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5580aa0fab057a92144b7ca6b22efe4d808e2536 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25c231d153641761b25aeb85200c0d184dbb64cb | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2083b4dcc07b1584b65f825130b1b4c722069f | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8977b2abd8aa97143f5da28a3565f16af0043c6f | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6433ed6c9a856dec041b11b90db0c237b2b0cd | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/150aabc1234a501ef9840f4c18f5ebc61885ba77 | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d0f143af5b865adaf60260ed21f799ad3139dee | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4e815076f74fd69b1db896bd670e269ad64d7ec | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2658fd9e7e6d359cbd5fa9f3c40496ff4bc7be7 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be8c682951058e53a2826e338818832978d645a9 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0905bfac7d59a07c9196a990114d20f657d547bb | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cef718e3b6eb91a22c78c0acb9646ffc7812c36 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fb207fb56d53c0719ee2016482eee1aa17d4beb | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01acde1187f04be43d0f328f1d4c4bc670d3afac | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/306c87695db5dc7c3d99851992ec6c56f4094938 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db654ed3d59e36ca82b21372ac6da1aa8afc4b1b | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/791b9a3367973bc8cf1cc059704710cbd2bf7495 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a69d9c406159f4b4ad083233963ceb24c30a28c | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb42d2c661dd11ae04b8484f50f20deda00da41a | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e374d405a76fca8534c62c9214116ac6279feb6 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82b87c55f1b8c8df513b88de60915f319f5fd837 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45dabf7f9510d2cea58c4bb45a9c0625c054f003 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1806f7367e1fb1a0bd6b808802aabcca60b14229 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6f36f0e9c2925d31c75b61ea4bb16a7bc6cc5e | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d388416f8a02c02ee3328801feb154b9a234b123 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d30bcaf6aa45faed866aa6cb3c4d25082d303d2 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5d4af272395720bf08eef90b314676c378cc1ae | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8561ad167e708ebb61648c6dbd311682f1f457a4 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe1df7b41183eb76c1a38625582063c96c8b6428 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb7f3f978e2bd08bcc64b7369ef9d5d6f88be16a | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ca3d0897a99842dc46b58421b5de2653da902b | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cecdaa9328caa22fa8dec1c8921503ca2b759c9 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6497e333090c48555d60f0a14c59fd9ba3190dce | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9227e1c5f45ff53568c02aa17a924bc88e50cd7 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce814cac8e6a203c6e05982f854bc97162a5dd14 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8690bc4baccce8ed6ff5ebe842dc469aac331ba | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/777dad3e3fbbfae93157211293554ee197ef2839 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a5a1c4be8dc4368c4e57d437587be361fe55f8 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d42345fcfd6199cfe2ed76e14497fa7756bbb44f | > sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff47e341aca679752ced8e9d643f57c9b92c21d3 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a72ad4af3ade0a5e72d711ddbf985ccbf5c4d02 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ecb835113576e2794e325b6797c13fcac4e234d | > sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c44408801a75967c190372a8847a92198fd2de1 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71b63b7a8a1da178c39875fa93c7f06ac0ab0bb | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/598f356442d08d7c00a4acd24e68db0b673883e4 | > riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eeca97ab6c488e945317a13dc9589ae61f9f5 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0c4bda25d3fd6bec0d4c5f88d03a461885f7f89 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/490e14ecdcf2d78ab6451d9183a13de2879e31fe | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27cd6ff074cc441db880d2bdc1332a564bd71fc8 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53c48337f4e38e8beea0eff924fb45b3e75cd19 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e8c9b49b3f76d9949aaac9fda6eec915f61801 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79dec87fc8d6129679b2c96eb4fa503c7aeeb42f | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf7f0dd0f6edc6f976a439637c863582f87bfe7b | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f28baba18fa9c4307c9e864a22a913bbc11ac840 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f12084e6d631d3786a99e7e098f608502c2307 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ca20ca94a7aea072b283e85cb313d9de86f1ea2 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b81f44065baf9f52d3502767bf1cca97f3907861 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9505b3633819fc03924ea82a6fadbd23d8b5095 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6f898e4cee21a4033557e562a553286c8bae791 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4ecf06d27ebb1f17076204649d176aff2a7f5e6 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b609e4f8922abe5adef2898b48ceb72629d0c021 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22ccfb7dccae7e74c9ae79e54ba35ef1666352f6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8552d71670019ba7490da0ccfe793f476e6e137 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23716cf9f9c0d7b569237f6d245fbfd0ec033a21 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38ce1bf94b51f6fda0423d175fe591166e606b8c | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0e0fd407e7045e396cd2cdf13d05c27dc39658f | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eee1b3d8454bf051090afb94df0923938afe287 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fe42fc166006b2f4d12430b27f6bfdd223ed305 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95ff358906ade7aff787d9db6f4e701e09763457 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d41946f2997e7e81032dc9c8f74fd7ce4e9b4b0 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd59fe8f9a9a7f6a19abe0863dd380a3bcee70d5 | > aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/748303e81411ce4dcc7ef9b42ed8c76f346494fe | > arc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/d6a0bc684f72414b62cb0cf40c2cb8598b47ebb2 | > sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7dc350d1c2f1857d27be59183b8bf37177f88dd6 | > microblazeel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/0ee89d616333ceeda4f82c262c57ddcf6b0bc8c0 | > powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/388a2cc92398a09a6b720dba89fe9c394cef8023 | > microblazeel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c7d6dffe47e0cd162492db9b7564b303f8949f50 | > nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/dd62aa0dda0be9bfd846de98df99d8fefdb75e7f | > mipsel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8d8410044fef08b253c92716c7f0bf0058fd380c | > arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcc5369e90f371550ecf823acddc3dce1604616d | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a72c5e5b2de0278f697de2e665a6c7a0a4523f9 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bd70f21e42ff392d3b7e0f7a4b803c9b8cf2ec33 | > sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3733d0ed2a2f424fdb28550c11dc010022d845a1 | > aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f188862d6c9c118bd0561902a217179c2d559744 | > or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6d9b67a6f3b0317db346ba6cd2879c8f4fd72853 | > arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1ad6890cebeea960e7477f7ea22974a4704270b5 | > powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2d6cf40e8bfaeb8d394ade22fb5a48689419a208 | > powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/56c021dd6259d89b8dd0e3fcb51e8a091dbc8447 | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1fb290058831b2db96375c738b935f83f5d65b0b | > armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e23c72590aefc67aefa317f840e2f9d4ede025bd | > microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/486188cba4946c091f8af46f2acf0ad57c852fe2 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f34336f467aaa7a0e660e5f513b8fa563eb7437e | > x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f6321d542aa92d4485d715ba2fb5c4b5c2874d89 | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d5ce458e8757364d779539ea7389ab47b967b913 | > mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7458482d1f6c8e6bb870d9e0ebaa16fc18fdaf60 | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a0c42592fca2dc183ec4285cc55eb5726a08057 | > powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cdd651addad4b7ca4a27be3d3a2fb1aadc845008 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/172d8471e1da235d5ca30994319fb39fb356ffe3 | > s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/21cff6b9fb25ddbeed4629758697ef4be9ad97bf | > mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea370641200774482e29558fe5f63e3dc979091e | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b017d50007c7503eb7e1faed639a226ec27f1aa5 | > s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b989f6ae80ddcf75940d468af1dfbe40cc55e310 | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4316df7c08f041bcb736f017af05441f5a4f5106 | > arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fac2d1e88c1f8a5078281233c80f03caa294e9e5 | > armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/5c2b113b82394b670e018d32a4c115fe82aea319 | > i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b946c368514012026ed82ce10e1d2c86a576a1dd | > arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f6067a50340b7ced67cdb67de9125c8a4e20bfd2 | > microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc425437fd4c832ab30a37b2b42a297ca01ac219 | > sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9eb9521c037cc5034c1eb1a3c6b0a45f7257b83 | > or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a34c1636d93198a38209a87d026f992abc60d05b | > aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b7ee5e650269fe32c9b6eee2bcc43bf70f03fdd | > s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/50a2f9c10e3e25f84c2c46fec9436553369c39a1 | > aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b2d5978befa17d782267407ee699387204dbdaf | > arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d7e834f031eb30389a8984ada51f91b84635b043 | > arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/676a4a02be934202b3928bf1671c5d131ed1da04 | > or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b0f4c776b4d9eae0913d404c0eeec874fdb1701 | > mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/632cbdde3987e23d5665fdc1c8dfb06a5eb74474 | > armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1731e7da6dab2932efb0daba345f3e7e140980bc | > arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b826d612a32280256c5998275f31287de2fdf87a | > riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b833b5200dff6377ccde9fecb87cffb9f371a9c0 | > x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/fb73187885a1cbda134ad4e6e7dab434d2b797a0 | > i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08172ba68beee0c92e93149910f6c90bd552fe37 | > x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d90f695b2ecef59f6829e5ad0cf0978f8c86b33 | > s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1bba6be441eb028bbc2b997b5caf52b13b1e582 | > x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a63ce609ecc0d0812cbf2e3126fb3aeb3c30506 | > i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1e3c89f8c5b23c9600f3695c4287783f0d0949f | > i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/fd7503469bb31b03dfe24f9c117d03969d8e7475 | > arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/096e12e3247538ce451cc933494de27a66bc3989 | > x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9f64f9495878521f957769de4626bbd60f955e1e | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e1100dcbecf3b1cb1e55a5433deb7387dca1264 | > x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/093a7d7a619f53c0bc7c9dac0bd3fecccd513559 | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d48c50d5ea0ab438840724982e58f50ce4abb83c | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/81903f96e5f480b742587bd7426f028d37f13819 | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/e08feceabc2795819d666596de0bce1e11aa64b7 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5c51d014cdc6178371cdffab2d962bdfea85064 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6e2b88661bf06ccc907113bba2adc32c19e71b4c | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a2562f5fa404e6a2970c57458eace161f775010b | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aabd863c02f16e5b7255856c4649cd2033fb77c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f1e3d34926d4ecbfd5a972d193e50cefbff44d7 | > i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d377427b65236cd08a7e86efead21dc0510cfabf | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ca13f99e08e4c2903e29371e550356b443e84f8 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaa2b845b252ad746d28c22c326b70723568df31 | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9c27f2146e4adee4fd1d8a18402e8dce47742e1e | > powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/76f66889efc8f88728d060d949293b18fde16e3d | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a6b475a351da1de294958d9da5f65f13430b541c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef94c214e5e78f43ad1b68d7743ce3fd9d8c1c85 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c186cadf6d7590c38ad581e317523368b8687e25 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed928c3ece5c03d912871ec83ec2d7619b2b995 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/25b9da3e15e3cf076376f297d266dcb0fbb60c95 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/35b73bfbea83de50f87abeb9dc650252b8568e33 | > powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dc9c8df47ec2d772d48319fd105281578e3d5356 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/13801a386bffad30948a822dfb7699f29ccb3e75 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ad18af624123050ec81be35e18378d6e9419a9ba | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8c4ee5d40cd2cf5b842d630a278402dbc1ed8ffb | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc0f9741aebc71446c969a94bb59d31bd8d2917d | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9bb4ea4fbc658153329aebfd9e3eb458f84b1f13 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d680b706839365738d04b6bd2347f68b6a2d5561 | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/42a27598d9269c97a332988d86a90eddb70c3904 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1eb8a2c09992f7c2fc2462fae78cb4603fa7b0c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9ea243d4ff5f8bc329fde80c10ef3aedf2f4746e | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2c11b6afe3ab2613d384480652d64f11e513ff44 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95cd84fae3d2c0e8b843cee38d0c816e7b9c620f | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0459a388204c3740499bdca526136c4ee2a0272b | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce8ab4721766b1b304449e77fac273019daf1368 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b2aac6306692bdc81736ff181c3b82b51d22741b | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b379a3db0367552b8e3a48edb66cc18ebd3a87b5 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/163fccbd172ea444d949603f932e343a65e3fdb1 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/64960f055177b1758581a84bbe1a16b3d0ae3c44 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/ea30a9e1a82916667ff5ed36bfad749d8f899db9 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/1e17607b4d7b87130147380b9871f208c3022d71 | > i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f122e4d4d22b8baaec09ed80e869b7a4310d37d | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4a043f2ffeb3a73270f1d01e0d1ba4f0cfde167f | > arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/e7055723d25ed69dd99e925a89245a1b813d1278 | ORPH > mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e05f664a29362616f9627dd68546761697072cfa | > powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/382003ef07a97aeb0bb7d7ef121a75d4d2c2cec5 | > mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ab3057ed2e04810f7dd39fc7bd93ab394c81e2 | > x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d8f16746519e9cd8d7f78ee1ae349d708cfb7ca7 | > sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8b04e4bb08458f011581e5b8bd762d82dfa2502e | > mips | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/9e4cfcf9bc9060dc75928ef3d05b0618763bd9f6 | > aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6b11a0c296b322478379b6429ee8cec11365278e | > mipsel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/465ad5639207eea66d34d54c9e784107ebfa15ef | > sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/cf1f26cbcda0cc4eb77841be2bd2c6e5e457411b | > microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/313106b9deabb7e022452611c1668a037f19d1ed | > aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f91d910fd96a904c319dfd10001bdba4df7786e1 | > mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/003b1d284a677cb048909eeee840065b3f5a87da | > mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29dbc9b703e4d260676a7d0133a8ee0055dc2279 | > arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d1e0b1c31d04d195b96259c0f00ca3baa9211f0 | > mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fa37ef3155d81a4e0143354fcb977fd3517e409b | > m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cba89d4b9653330204e3ad62457a8ef255204b | > powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/717da370cbf802e64500834c98c40a963823198e | > sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/960d3ab3b9fd6dd5f296290c96e7e1a4e1237031 | > mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b74a446feb70cd317e3436adf27c081c8c01baca | > microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3661325262b9ef47c6987d6a157b9411c46be73d | > mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd4604b79cdc41c25275fd69308ad3d5a65d5ae5 | > arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e8e4a30dc307b4e39f1eccf6eacd53d499384ba | > powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/365bc57a3c005e9ef95941bdbee536c90351037c | > arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c54ba9526ecf692c0b4211d1333e38b0be0235e | > arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3f9a2e51c3490d2af17a45382e7a0b2700078b7 | > x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/347c2ead3bc4c65bace3d24a78be0418ee9c6fc4 | > arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d5768ee6ed410a52eeb31109d6c951bca75e24 | > xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/790c56ba756f7b2727dc42cbefdc4ce1ad73aff7 | > aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/70b8d82e70a7189a371b61c2e5b004a3eb90bc3b | > arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/634cdfe13c3732cd50fdbf6da77e64f42eeb3d80 | > sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/0d0bc6318ba9bc7effabdb7297f3e8023b3d3806 | ORPH > sh4eb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/539f930a2b118b6ebd278b1012b39b8efaacffed | > arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc116876aef07804bfa0d080cc834ecf605de191 | > riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f2e80095a7897cbc77fcf4158744dfcd58a0f40a | > riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/d2d9b9f2d5f54bf6c8efc472c1ecf5528248a3a4 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/bd2985ff1abd7c2e87901eb3ae48a3cd55a753e6 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/49d337e820aec5753b8354ddc311ad36679140fb | > arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9b4fc62db244d5e5717b3c0ceb5f08dd65a43255 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ec2d5cc354c78d44b3d54258a38f73cbe23342e3 | > arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cd5b18af08d3904c48b70c27978cb14fc0cfb457 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/578a8ec0c70d9bfa6e55ab30bac97ef9e9b47483 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/3f4ce666e21572b9be30b274db062488f9598d21 | > aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2507575c2748dc37bf93f050e6538cd10b8ac8a5 | ORPH > aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5037854bcbc6bb911746497fc425a9fd60413da3 | ORPH > sh4 | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/84ae0e835458b620061480a1cee6d7073662fd3e | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3d6268c1f192b1c77032a668083f59e05f8913d0 | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/82f93f6c46d80ae83f3b6b8c8d619f66287a7db6 | > or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27165bbd6f26db75f81bf8bb503acb49b8886c91 | > mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d81739b9a6dcbfab1a6b8d9ca53cf1b01e9804fe | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5cf6ec0a439e24a6233243571b5e5be8ffe78725 | > powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d81e1a753bd5f58ca5bc13e4e98494bf60f08ba3 | > powerpc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/79b4abda6f11028dfdc98aa75ccf45cf0f2dbc16 | ORPH > arc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/ced239a117dde440a860a810bb41711cbe0f6aec | ORPH > mips64el | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/48627c5f6c60270c397e475147c492575ea2a355 | ORPH > m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/6ab211eda5c44f8874d5dcf870dc3aa84d7f3522 | ORPH > powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/92c5bcd037e2db08f4235efe32b81ca19f1f717a | ORPH > mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/91bd438628c90501ae09620a11e94023f2b310d3 | ORPH > arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cc4bf8840065d44d17cb5d839b3755002ac53e3 | ORPH > arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/82ae6de2b3bc229842f6e0a2998c898e089220fb | > sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/66df85003589bcd46a02114796b1e2379df3ff18 | ORPH > aarch64_be | micropython-1.19 | NOK | http://autobuild.buildroot.net/results/268774989beaca5743def80ce537e78d541bfcda | > riscv32 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 | > sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d5393ebd89661d828e4b49419dc3243fea942dd1 | ORPH > sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5e73f06d67648d4509f360f9d554d7c8a8a9c06c | ORPH > arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/98792a0d9c7bdee7cf69496a72c0755163ea672d | ORPH > powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/4a463c951a104bad8713300fd194241e7ab0400c | > xtensa | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/b39191876e8ea0871c811e3124c02f2c8fa93d50 | > microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/485de47b0b5705fd536e41ef39cac1ea0cc580c5 | > sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4f8b3e84866682b55de9158da0fee181f8f7bd8e | ORPH > xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4cd768ae7816f0f013a52b5e767b51bd96128953 | ORPH > arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/39bd45498d0f77ace2051e7e8efd31dded8483df | ORPH > x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cf1eeccf63591e723967dbc559fa803b24087520 | > m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2bc4a5cce9ff3c648a2869639cc9bc1ac4bedfd0 | > or1k | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/ec4ea4cd308ec0c7b255f82139d98dc8881b04b0 | > powerpc64le | pimd-2.3.2 | NOK | http://autobuild.buildroot.net/results/3718e26cfdeccd5944ad597317410670b9d06906 | > m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/70fa54bfd4f3fed1c81f975b1ba096f9801f2841 | ORPH > m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/16cf60497350567e6ee572351ad7873420b5dfb5 | ORPH > riscv32 | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/01802ca182687fb2bb543872780672fe64dc93dd | > sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/d72a9529429e83f69d8c7764865b989216f82b74 | ORPH > microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/8a904d8a2fe4dfd2c5ed05a56d6b02a287b0a0ca | > arc | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/f605a8f96e0ed6a012334fd1bc670be66f7c5ce3 | > arc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/56a699cb30d8e5e289458941fa31cc005b0a2a71 | > or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c813606c590d73d2129a8b646e4b939bd9dd9660 | > arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/134087dbff1b34db48ab750143b525d9a0383eee | ORPH > powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d17d696d92876910d10785bbc10ead714d9800e0 | ORPH > or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9b4a6d7473f9e66d93451cdc957ed9d21a759dd7 | ORPH > xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3dc8eb0cbf842b57acac32a6903db67d19be7f41 | ORPH > xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/4ae8c2b6fb85ede0441f26060b41e2e165c9c229 | ORPH > mips64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/32d32af179bb65d5b1e6a0ffe10b424766201147 | ORPH > armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8f497a06ce2f0490a0392ecc61241f16f8ca25b2 | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6aaf002b7ae46f34bdbef2ac270abc3498c54164 | ORPH > arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/59febc8843f821d9ef05ebb9d0d73d8a8fd47f7f | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8fca67980583f55333c451b2649141c5501cb7dd | ORPH > mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/88c9fa4a638eb68b3532b60fac8a8131da0a417f | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022c5748bf45d8d0b7bb3989b10582cc466f5af5 | ORPH > aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a665c3ffc25ed125bc3ce945a66ba0ce89a87290 | > mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7a258b4c8833bbd824d51bf3142ca93413677b53 | ORPH > nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bd26fdf3163cc517c5e1b577a69d236eb21509ec | ORPH > armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44004a01a7f51b923ad43aa4dafbfc0ab2403e67 | ORPH > sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e75c0a861c1573213f02f32a151772e60cf88db | ORPH > or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1ef855350a6fee35517e945efdda30746da690 | ORPH > sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/76047421e7d9c79b02586b7d045a8e2eb747c9de | > mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5d67dcb26bebd0b0feedd9b676d005a25a3b7476 | ORPH > mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a3eb12f4658027f54b8d8a725319241cc8252e2c | ORPH > mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/cfbf5165e398749ad8d1fd458aae0f7c69d28a50 | > mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b20980176ad32312a9655f9929bc0d720d3591c4 | > powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/47cc493eb1421a4de6dfff7dfb7dfb3f30a0e702 | > powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/d543de55a4fabdf59497b293dee2f6d22084fe85 | > mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/94c25fcd43176197cc30b2a9a513598fe19da472 | > mipsel | unknown | TIM | http://autobuild.buildroot.net/results/6945d36c9d3cf73a011e8cf6f96153ff8d847f53 | > sparc | unknown | NOK | http://autobuild.buildroot.net/results/09ea50a1ef10edb8a5e6a6890e9945e81b1aff7e | > or1k | wampcc-1.6 | NOK | http://autobuild.buildroot.net/results/83efdd2c0b14d89e6304986cd26716be680723a0 | ORPH > mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c9aabe19e7c3f048f4a11cdffd6a44d24f444c05 | ORPH > mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/281e35a765b87334d51e268a2b9a475ba134de68 | > i686 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/614ccdd145a34245b4709fd123275de7a4469c5d | > arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/886953ea2c98983b9a46660e4975b1837b18804b | ORPH > arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/68c23c82c647e333df9fbdcc762158454cf052ef | ORPH > aarch64_be | znc-1.8.2 | NOK | http://autobuild.buildroot.net/results/5f4569df073779ebf8e975a45db1dc36f20742f5 | > microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/09d720ffc4f204a28f0f8f9bdaaaefebfd15a07e | > > > Classification of failures by reason for 2022.02.x > -------------------------------------------------- > > bat-0.19.0 | 1 > igd2-for-linux-2.1 | 1 > wavemon-0.9.4 | 1 > > > Detail of failures for 2022.02.x > -------------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/cb9acba896fa13752389d12f19cbb66f0a02ecb6 | > arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/30881ec6d4fc9f89085322b48da8e5a0da0073ff | > arm | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/db0ec450302f68c9296df20413199aa67a7f040e | ORPH > > > Classification of failures by reason for 2022.08.x > -------------------------------------------------- > > host-rust-1.62.0 | 3 > dash-0.5.11.5 | 1 > host-gcc-initial-12.1.0 | 1 > host-pahole-73383b3a39afe86... | 1 > memcached-1.6.16 | 1 > open62541-v1.3.2 | 1 > pcsc-lite-1.9.8 | 1 > python-sip-4.19.25 | 1 > toolchain-external-codescap... | 1 > unknown | 1 > xxhash-0.8.1 | 1 > > > Detail of failures for 2022.08.x > -------------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d665ea8ab6268e005771265c2624c4043904db02 | ORPH > x86_64 | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/4348a0689297f08acb892fb2f2a08e8ed5e63498 | > i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/895f6959611517f8d99ee65f7e3ecc4ba7517402 | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a2b720a935fafc7ad1b8489b5eddf167f73e7e62 | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/98ff904509a1ba8b798a528a98ba927a9a377efc | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/67ca94f3febfb66f70638878e0d9f5f0c56de08c | > m68k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ddbd4c53aaa695c29803da1ac139d780bf2819a5 | ORPH > sparc64 | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/c90412a1debbaa80dc57054f30b1768d48e14412 | ORPH > arm | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/bb5e7d4021c58d7a357ce39338ba317ab893f3a9 | ORPH > riscv32 | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/521e5f6becebf76d5319125ae674c11d19c27636 | > mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/891c0be7bb164c0f03ef0b6bf59300293d5ec3de | ORPH > sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/07a9b305257eb99fb60538a74134927d36ad7356 | > powerpc64le | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/475d838916ea743f390f365e13acb87d1a27eefd | ORPH > > > > -- > http://autobuild.buildroot.net > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From giulio.benetti at benettiengineering.com Wed Oct 12 15:38:39 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 17:38:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> References: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Message-ID: Hi S?bastien, On 12/10/22 16:43, S?bastien Szymanski wrote: > Drop first patch, upstreamed: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f > > Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 With this bump my patch becomes useless since my patch has been upstreamed too: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=5086e7c0de4d0094f8674368a88d931b27589d53 and so we can drop it: https://patchwork.ozlabs.org/project/buildroot/patch/20220918163147.1133842-1-giulio.benetti at benettiengineering.com/ But there is an error arising while building with sourcery-arm using $ buildroot/utils/test-pkg -p mmc-utils ``` mmc_cmds.c: In function 'erase': mmc_cmds.c:2633:31: error: invalid application of 'sizeof' to incomplete type 'struct mmc_ioc_multi_c multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + ^ mmc_cmds.c:2640:11: error: dereferencing pointer to incomplete type multi_cmd->num_of_cmds = 3; ^ mmc_cmds.c:2642:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START; ^ mmc_cmds.c:2643:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].arg = start; ^ mmc_cmds.c:2644:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; ^ ... ``` Have you given a try with that script? Could you please provide a patch to fix that bug too? Or I can provide it later. Thank you Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > > Signed-off-by: S?bastien Szymanski > --- > ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- > package/mmc-utils/mmc-utils.hash | 4 +- > package/mmc-utils/mmc-utils.mk | 2 +- > 3 files changed, 3 insertions(+), 40 deletions(-) > delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > > diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > deleted file mode 100644 > index 7725f9ca5e..0000000000 > --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sat, 28 Sep 2019 20:44:52 +0200 > -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 > - > -Fix following error with gcc 4.9: > - > -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] > - struct rpmb_frame frame_status = {0}; > - > -Fixes: > - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: sent to linux-mmc at vger.kernel.org] > ---- > - mmc_cmds.c | 4 +++- > - 1 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/mmc_cmds.c b/mmc_cmds.c > -index fb37189..6b09f26 100644 > ---- a/mmc_cmds.c > -+++ b/mmc_cmds.c > -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, > - u_int16_t rpmb_type; > - struct mmc_ioc_multi_cmd *mioc; > - struct mmc_ioc_cmd *ioc; > -- struct rpmb_frame frame_status = {0}; > -+ struct rpmb_frame frame_status; > -+ > -+ memset(&frame_status, 0, sizeof(frame_status)); > - > - if (!frame_in || !frame_out || !out_cnt) > - return -EINVAL; > --- > -2.23.0 > - > diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash > index e8b2826612..1256f63487 100644 > --- a/package/mmc-utils/mmc-utils.hash > +++ b/package/mmc-utils/mmc-utils.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz > -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h > +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz > +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c847378692..bf940967ef 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 > +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 > MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git > MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 From peter at korsgaard.com Wed Oct 12 15:41:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:41:25 +0200 Subject: [Buildroot] [PATCH] configs/aspeed_ast2600evb: Set BR2_ARM_FPU_VFPV4D16 In-Reply-To: <20220925132218.3848758-1-clg@kaod.org> (=?utf-8?Q?=22C=C3=A9?= =?utf-8?Q?dric?= Le Goater"'s message of "Sun, 25 Sep 2022 15:22:18 +0200") References: <20220925132218.3848758-1-clg@kaod.org> Message-ID: <87pmexnj6i.fsf@dell.be.48ers.dk> >>>>> "C?dric" == C?dric Le Goater writes: > The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are : > half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm > the vfpv3d16 feature bit is common to both vfpv3 and vfpv4. > Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks > user space). Set BR2_ARM_FPU_VFPV4D16 instead. > Signed-off-by: C?dric Le Goater Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 12 15:40:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:40:21 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] configs/aspeed_ast2600evb: set BR2_ARM_FPU_VFPV4D16 Message-ID: <20221012154141.423B186BE5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=23fbc414296c27f5200d21ce5a9ff53f80e5af0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are : half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm the vfpv3d16 feature bit is common to both vfpv3 and vfpv4. Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks user space). Set BR2_ARM_FPU_VFPV4D16 instead. Signed-off-by: C??dric Le Goater Signed-off-by: Thomas Petazzoni (cherry picked from commit 7ccb318d80f0d09e22f944ac9fc618f9abedbe43) Signed-off-by: Peter Korsgaard --- configs/aspeed_ast2600evb_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/aspeed_ast2600evb_defconfig b/configs/aspeed_ast2600evb_defconfig index cd058ad0ac..04239566c8 100644 --- a/configs/aspeed_ast2600evb_defconfig +++ b/configs/aspeed_ast2600evb_defconfig @@ -1,7 +1,7 @@ # Architecture BR2_arm=y BR2_cortex_a7=y -BR2_ARM_FPU_VFPV4=y +BR2_ARM_FPU_VFPV4D16=y # System BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb" From peter at korsgaard.com Wed Oct 12 15:44:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:44:26 +0200 Subject: [Buildroot] [PATCH] package/collectd: work around gcc bug 68485 In-Reply-To: <20220924230826.283565-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Sun, 25 Sep 2022 01:08:26 +0200") References: <20220924230826.283565-1-giulio.benetti@benettiengineering.com> Message-ID: <87leplnj1h.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > collectd is impacted by the microblaze-specific gcc bug #68485 [0]. > As for all other impacted packages, force no optimisation when using a > toolchain riddled with that bug. > Fixes: > http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ > [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 > Signed-off-by: Giulio Benetti Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 12 15:44:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:44:07 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/collectd: work around gcc bug 68485 Message-ID: <20221012154439.6636A86BF5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aa47ae19ed5c763fb74c1d5787e868756ece6dd8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x collectd is impacted by the microblaze-specific gcc bug #68485 [0]. As for all other impacted packages, force no optimisation when using a toolchain riddled with that bug. Fixes: http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 15f48d57f73da375ed28e582ab68740704b499fd) Signed-off-by: Peter Korsgaard --- package/collectd/collectd.mk | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/package/collectd/collectd.mk b/package/collectd/collectd.mk index 5751757040..5510c265e8 100644 --- a/package/collectd/collectd.mk +++ b/package/collectd/collectd.mk @@ -27,6 +27,14 @@ COLLECTD_PLUGINS_DISABLE = \ COLLECTD_CONF_ENV += LIBS="-lm" +COLLECTD_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y) +COLLECTD_CFLAGS += -O0 +endif + +COLLECTD_CONF_ENV += CFLAGS="$(COLLECTD_CFLAGS)" + # # NOTE: There's also a third availible setting "intswap", which might # be needed on some old ARM hardware (see [2]), but is not being From peter at korsgaard.com Wed Oct 12 15:43:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:43:43 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/collectd: work around gcc bug 68485 Message-ID: <20221012154543.95AD086BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c52157f6aabd1cc92026610efa48aae4fe1053dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x collectd is impacted by the microblaze-specific gcc bug #68485 [0]. As for all other impacted packages, force no optimisation when using a toolchain riddled with that bug. Fixes: http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 15f48d57f73da375ed28e582ab68740704b499fd) Signed-off-by: Peter Korsgaard --- package/collectd/collectd.mk | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/package/collectd/collectd.mk b/package/collectd/collectd.mk index 5751757040..5510c265e8 100644 --- a/package/collectd/collectd.mk +++ b/package/collectd/collectd.mk @@ -27,6 +27,14 @@ COLLECTD_PLUGINS_DISABLE = \ COLLECTD_CONF_ENV += LIBS="-lm" +COLLECTD_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y) +COLLECTD_CFLAGS += -O0 +endif + +COLLECTD_CONF_ENV += CFLAGS="$(COLLECTD_CFLAGS)" + # # NOTE: There's also a third availible setting "intswap", which might # be needed on some old ARM hardware (see [2]), but is not being From giulio.benetti at benettiengineering.com Wed Oct 12 16:00:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 18:00:25 +0200 Subject: [Buildroot] [PATCH] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 Message-ID: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash index ac6587b27a..fd874f1f0a 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 64f15a8c7d383ac92230ef82711507a7f3a309462999f6694863fbbb4f12e0be sunxi-mali-utgard-driver-c4cf7aabed25e0fd27159564caf588a37016870d.tar.gz +sha256 4b66f20272c63ce8ea769bf1c95f9923ed6facabe0c14a8c7644b302b9f23b58 sunxi-mali-utgard-driver-73a80d550f2f181b5fc7fc2d859e15d077d845e4.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk index 594a770e61..15d660e49d 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk @@ -4,7 +4,7 @@ # ################################################################################ -SUNXI_MALI_UTGARD_DRIVER_VERSION = c4cf7aabed25e0fd27159564caf588a37016870d +SUNXI_MALI_UTGARD_DRIVER_VERSION = 73a80d550f2f181b5fc7fc2d859e15d077d845e4 SUNXI_MALI_UTGARD_DRIVER_SITE = $(call github,giuliobenetti,sunxi-mali,$(SUNXI_MALI_UTGARD_DRIVER_VERSION)) SUNXI_MALI_UTGARD_DRIVER_DEPENDENCIES = linux SUNXI_MALI_UTGARD_DRIVER_LICENSE = GPL-2.0 -- 2.34.1 From sebastien.szymanski at armadeus.com Wed Oct 12 16:11:32 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?Q?S=c3=a9bastien_Szymanski?=) Date: Wed, 12 Oct 2022 18:11:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: References: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Message-ID: <0f695802-d4d9-fba5-f87a-e036ff1c6253@armadeus.com> Hi Guilio, On 10/12/22 17:38, Giulio Benetti wrote: > Hi S?bastien, > > On 12/10/22 16:43, S?bastien Szymanski wrote: >> Drop first patch, upstreamed: >> https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f >> >> Fixes: >> http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 > > With this bump my patch becomes useless since my patch has been > upstreamed too: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=5086e7c0de4d0094f8674368a88d931b27589d53 > and so we can drop it: > https://patchwork.ozlabs.org/project/buildroot/patch/20220918163147.1133842-1-giulio.benetti at benettiengineering.com/ > Your patch has never been merged into Buildroot. (Otherwise there would be no build failure ;)) > But there is an error arising while building with sourcery-arm using > $ buildroot/utils/test-pkg -p mmc-utils > ``` > mmc_cmds.c: In function 'erase': > mmc_cmds.c:2633:31: error: invalid application of 'sizeof' to incomplete > type 'struct mmc_ioc_multi_c > ? multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + > ?????????????????????????????? ^ > mmc_cmds.c:2640:11: error: dereferencing pointer to incomplete type > ? multi_cmd->num_of_cmds = 3; > ?????????? ^ > mmc_cmds.c:2642:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START; > ?????????? ^ > mmc_cmds.c:2643:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].arg = start; > ?????????? ^ > mmc_cmds.c:2644:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; > ?????????? ^ > ... > ``` > > Have you given a try with that script? Could you please provide a patch > to fix that bug too? Or I can provide it later. I did now (and just found a bug in it ;)) The fix is that we need to have mmc-utils depend on the right linux-headers (>= 4.4), isn't it ? Best regards, > > Thank you > > Best regards -- S?bastien Szymanski, Armadeus Systems Software engineer From sebastien.szymanski at armadeus.com Wed Oct 12 16:48:31 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Wed, 12 Oct 2022 18:48:31 +0200 Subject: [Buildroot] [PATCH 1/1] utils/test-pkg: proper output on host without jq installed Message-ID: <20221012164831.10476-1-sebastien.szymanski@armadeus.com> On host without jq installed, test-pkg's output is as following: $ ./utils/test-pkg -p mmc-utils bootlin-armv5-uclibc [1/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) JQ IS OK bootlin-armv7-glibc [2/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) JQ IS OK bootlin-armv7m-uclibc [3/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) ... Since test-pkg handles this case we can hide this error message and have proper output: $ ./utils/test-pkg -p mmc-utils bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: OK Signed-off-by: S?bastien Szymanski --- utils/test-pkg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/utils/test-pkg b/utils/test-pkg index 4ebfd9af66..e7f5464817 100755 --- a/utils/test-pkg +++ b/utils/test-pkg @@ -201,7 +201,7 @@ build_one() { # Validate that we generate proper json as show-info { tput smso; printf '>>> Running show-info\n'; tput rmso; } >> "${dir}/logfile" 2> /dev/null; - JQ="$(which jq)" + JQ="$(which jq 2> /dev/null)" if [ -z "${JQ}" ]; then make O="${dir}" host-jq >> "${dir}/logfile" 2>&1 JQ="${dir}/host/bin/jq" -- 2.37.3 From neal.frager at amd.com Wed Oct 12 17:54:26 2022 From: neal.frager at amd.com (Neal Frager) Date: Wed, 12 Oct 2022 11:54:26 -0600 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221012175426.32367-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware It will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch enables a pmufw binary built by petalinux to solve the issue. Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin --- boot/uboot/uboot.mk | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..ab7dedb4b6 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -392,8 +392,17 @@ else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) + +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) +UBOOT_ZYNQMP_PMUFW_CONVERT=y +endif + define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From sebastien.szymanski at armadeus.com Wed Oct 12 14:43:10 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Wed, 12 Oct 2022 16:43:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 Message-ID: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Drop first patch, upstreamed: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 Signed-off-by: S?bastien Szymanski --- ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- package/mmc-utils/mmc-utils.hash | 4 +- package/mmc-utils/mmc-utils.mk | 2 +- 3 files changed, 3 insertions(+), 40 deletions(-) delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch deleted file mode 100644 index 7725f9ca5e..0000000000 --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 28 Sep 2019 20:44:52 +0200 -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 - -Fix following error with gcc 4.9: - -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] - struct rpmb_frame frame_status = {0}; - -Fixes: - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 - -Signed-off-by: Fabrice Fontaine -[Upstream status: sent to linux-mmc at vger.kernel.org] ---- - mmc_cmds.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/mmc_cmds.c b/mmc_cmds.c -index fb37189..6b09f26 100644 ---- a/mmc_cmds.c -+++ b/mmc_cmds.c -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, - u_int16_t rpmb_type; - struct mmc_ioc_multi_cmd *mioc; - struct mmc_ioc_cmd *ioc; -- struct rpmb_frame frame_status = {0}; -+ struct rpmb_frame frame_status; -+ -+ memset(&frame_status, 0, sizeof(frame_status)); - - if (!frame_in || !frame_out || !out_cnt) - return -EINVAL; --- -2.23.0 - diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash index e8b2826612..1256f63487 100644 --- a/package/mmc-utils/mmc-utils.hash +++ b/package/mmc-utils/mmc-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..bf940967ef 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 -- 2.37.3 From james.hilliard1 at gmail.com Wed Oct 12 18:39:07 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 12 Oct 2022 12:39:07 -0600 Subject: [Buildroot] [PATCH 1/1] package/linux-firmware: bump to version 20221012 Message-ID: <20221012183907.1651460-1-james.hilliard1@gmail.com> Update brcmfmac4356-sdio.vamrs,rock960.txt filename to brcmfmac4356-sdio.AP6356S.txt due to rename: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/brcm?id=4ffcf980a535c1f26aa994ecf64a1b9d1ed6216e Update WHENCE file hash due to date/firmware file updates. Add missing LICENSE.ice_enhanced and LICENCE.moxa hashes. Signed-off-by: James Hilliard --- package/linux-firmware/linux-firmware.hash | 6 ++++-- package/linux-firmware/linux-firmware.mk | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/linux-firmware/linux-firmware.hash b/package/linux-firmware/linux-firmware.hash index 382e9cb2ba..d81223e311 100644 --- a/package/linux-firmware/linux-firmware.hash +++ b/package/linux-firmware/linux-firmware.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/sha256sums.asc -sha256 5938ee717b2023b48f6bfcf344b40ddc947e3e22c0bc36d4c3418f90fea68182 linux-firmware-20220310.tar.xz +sha256 e9d174af729511c8cccb60ec4e0b223b3c44b67d813b42d1ab9813acfa667fa5 linux-firmware-20221012.tar.xz # Hash for license files sha256 8116433f4004fc0c24d72b3d9e497808b724aa0e5e1cd63fc1bf66b715b1e2e9 LICENCE.Abilis @@ -14,9 +14,11 @@ sha256 a5777f9e80aca0603b0648454de996168b1c530322550ccda94d6d78bcf6c061 LICENC sha256 ae0db6cc4db33941148df0f67de53e76a77b1b5a46b3165edb7040aa2750015f LICENCE.cypress sha256 60fbc9cccb455e1a3306c97db942d6f24fa93664be61d54c497637e6d0e2ae83 LICENCE.fw_sst_0f28 sha256 5181b0b51efc79d5acb2c9bb92042878fdbad97a92114d4ab5e32e2b5b52fce4 LICENCE.ibt_firmware +sha256 8c45a83562a69f7ac4207e4cb5c0063af2e545791b3947bc81dc82305481c15c LICENSE.ice_enhanced sha256 0e0c11073ba3c832097da38e0905da36b8a3526f219407977b13b71c6675be7d LICENCE.it913x sha256 16d5040c7cf851fc693b7542e20870935b99802533ea1bfd231c377a2305e5c5 LICENCE.iwlwifi_firmware sha256 0fc67bd715b3395f3f2af464781910e9e69c4ba23da304352229b42dc9e986c3 LICENCE.microchip +sha256 59ae206c89108905ebdc9ad4c9336526bd2c0d50fbf988c21e8c2a82719d42a4 LICENCE.moxa sha256 2051d5bf0755a0668f8c3d9a0d1c41d4b8cc411aba70f720fda71ae9e3b4d25c LICENCE.qat_firmware sha256 4071a11d878dbc0ac6d9e71203d03b151638f9d7a8bc47a54c3cb964100d5822 LICENCE.qla2xxx sha256 d7bec70668ddd4aae8fb4aa32870e54b49fcdb0b9b007aa9f54b53a1ac7461bd LICENCE.ralink-firmware.txt @@ -33,6 +35,6 @@ sha256 8542aeabf2761935122d693561e16766ce1bcc2b0d003204f9040b7d6d929f2e LICENS sha256 be904cd28cb292b80cdb6cf412ab0d9159d431671e987ad433c1f62e0988a9bc LICENSE.qcom sha256 fc6223d4bfe9f2f9e2eddc44b9fe5721d0caf49f01cb08d602906add686d8c6f LICENSE.radeon sha256 2bdd2e716f05d9737d3f9a20f9a3a3c0caee0e866100ddb0673f1178e42f92b9 LICENSE.sdma_firmware -sha256 75afdb5d45a21ff95ff7aa82d67bc42a83830f2def98ea937c01d6e7603d76f9 WHENCE +sha256 6857749e23d6a2853e5d33f6d6012a60d5baa2b4d51b5f8c6799d00d68733841 WHENCE sha256 fa43e1b9a13b341a07adca9dbe73d0f9072d7966fdfe811c01f0dd2872d7309a qcom/NOTICE.txt sha256 bef9c828e84f21e7835b4de7daf954a327e1ff777871b58e116039b684c0d604 LICENCE.e100 diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk index 64d096df14..ea97166d93 100644 --- a/package/linux-firmware/linux-firmware.mk +++ b/package/linux-firmware/linux-firmware.mk @@ -4,7 +4,7 @@ # ################################################################################ -LINUX_FIRMWARE_VERSION = 20220310 +LINUX_FIRMWARE_VERSION = 20221012 LINUX_FIRMWARE_SOURCE = linux-firmware-$(LINUX_FIRMWARE_VERSION).tar.xz LINUX_FIRMWARE_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/firmware LINUX_FIRMWARE_INSTALL_IMAGES = YES @@ -643,7 +643,7 @@ LINUX_FIRMWARE_FILES += \ brcm/brcmfmac4373.bin \ brcm/brcmfmac4330-sdio.Prowise-PT301.txt \ brcm/brcmfmac4356-pcie.gpd-win-pocket.txt \ - brcm/brcmfmac4356-sdio.vamrs,rock960.txt + brcm/brcmfmac4356-sdio.AP6356S.txt LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.broadcom_bcm43xx endif -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 12 19:05:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 21:05:34 +0200 Subject: [Buildroot] [PATCH] package/qt5: bump packages to latest kde submodule versions Message-ID: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> Bump qt5 packages to latest submodule versions from: https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15 Drop a qt5wayland patch which is now upstream. Signed-off-by: Giulio Benetti --- package/qt5/qt5.mk | 2 +- package/qt5/qt5base/qt5base.hash | 2 +- package/qt5/qt5base/qt5base.mk | 2 +- package/qt5/qt5charts/qt5charts.hash | 2 +- package/qt5/qt5charts/qt5charts.mk | 2 +- .../qt5/qt5declarative/qt5declarative.hash | 2 +- package/qt5/qt5declarative/qt5declarative.mk | 2 +- .../qt5graphicaleffects.hash | 2 +- .../qt5graphicaleffects.mk | 2 +- .../qt5/qt5imageformats/qt5imageformats.hash | 2 +- .../qt5/qt5imageformats/qt5imageformats.mk | 2 +- package/qt5/qt5location/qt5location.hash | 2 +- package/qt5/qt5location/qt5location.mk | 2 +- package/qt5/qt5lottie/qt5lottie.hash | 2 +- package/qt5/qt5lottie/qt5lottie.mk | 2 +- package/qt5/qt5multimedia/qt5multimedia.hash | 2 +- package/qt5/qt5multimedia/qt5multimedia.mk | 2 +- .../qt5quickcontrols/qt5quickcontrols.hash | 2 +- .../qt5/qt5quickcontrols/qt5quickcontrols.mk | 2 +- .../qt5quickcontrols2/qt5quickcontrols2.hash | 2 +- .../qt5quickcontrols2/qt5quickcontrols2.mk | 2 +- .../qt5quicktimeline/qt5quicktimeline.hash | 2 +- .../qt5/qt5quicktimeline/qt5quicktimeline.mk | 2 +- .../qt5remoteobjects/qt5remoteobjects.hash | 2 +- .../qt5/qt5remoteobjects/qt5remoteobjects.mk | 2 +- package/qt5/qt5script/qt5script.hash | 2 +- package/qt5/qt5script/qt5script.mk | 2 +- package/qt5/qt5scxml/qt5scxml.hash | 2 +- package/qt5/qt5scxml/qt5scxml.mk | 2 +- package/qt5/qt5sensors/qt5sensors.hash | 2 +- package/qt5/qt5sensors/qt5sensors.mk | 2 +- package/qt5/qt5serialbus/qt5serialbus.hash | 2 +- package/qt5/qt5serialbus/qt5serialbus.mk | 2 +- package/qt5/qt5serialport/qt5serialport.hash | 2 +- package/qt5/qt5serialport/qt5serialport.mk | 2 +- package/qt5/qt5svg/qt5svg.hash | 2 +- package/qt5/qt5svg/qt5svg.mk | 2 +- package/qt5/qt5tools/qt5tools.hash | 2 +- package/qt5/qt5tools/qt5tools.mk | 2 +- .../qt5virtualkeyboard.hash | 2 +- .../qt5virtualkeyboard/qt5virtualkeyboard.mk | 2 +- .../0001-Add-missing-define-guards.patch | 35 ------------------- package/qt5/qt5wayland/qt5wayland.hash | 2 +- package/qt5/qt5wayland/qt5wayland.mk | 2 +- ...ro-don-t-link-statically-with-libstc.patch | 15 ++++---- package/qt5/qt5webengine/qt5webengine.hash | 2 +- package/qt5/qt5webview/qt5webview.mk | 2 +- package/qt5/qt5x11extras/qt5x11extras.mk | 2 +- .../qt5/qt5xmlpatterns/qt5xmlpatterns.hash | 2 +- package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk | 2 +- 50 files changed, 56 insertions(+), 90 deletions(-) delete mode 100644 package/qt5/qt5wayland/0001-Add-missing-define-guards.patch diff --git a/package/qt5/qt5.mk b/package/qt5/qt5.mk index 0706c3548d..b55accacf1 100644 --- a/package/qt5/qt5.mk +++ b/package/qt5/qt5.mk @@ -5,7 +5,7 @@ ################################################################################ QT5_VERSION_MAJOR = 5.15 -QT5_VERSION = $(QT5_VERSION_MAJOR).8 +QT5_VERSION = $(QT5_VERSION_MAJOR).10 QT5_SITE = https://invent.kde.org/qt/qt include $(sort $(wildcard package/qt5/*/*.mk)) diff --git a/package/qt5/qt5base/qt5base.hash b/package/qt5/qt5base/qt5base.hash index 27d2b99c34..4efc8fa172 100644 --- a/package/qt5/qt5base/qt5base.hash +++ b/package/qt5/qt5base/qt5base.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 ecff8cf42af98c2294f7c99eb8c41564892f470382adaf8f4048c85252849808 qtbase-2ffb7ad8a1079a0444b9c72affe3d19b089b60de.tar.bz2 +sha256 5622a9053154af9a353b8e8be217104c6af068b5b5aba8b07ef4fea2dc79fded qtbase-e44097b63d17ba3178a637df7fac51ddc51cb48b.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5base/qt5base.mk b/package/qt5/qt5base/qt5base.mk index efa0e16e9a..028236d2ed 100644 --- a/package/qt5/qt5base/qt5base.mk +++ b/package/qt5/qt5base/qt5base.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5BASE_VERSION = 2ffb7ad8a1079a0444b9c72affe3d19b089b60de +QT5BASE_VERSION = e44097b63d17ba3178a637df7fac51ddc51cb48b QT5BASE_SITE = $(QT5_SITE)/qtbase/-/archive/$(QT5BASE_VERSION) QT5BASE_SOURCE = qtbase-$(QT5BASE_VERSION).tar.bz2 diff --git a/package/qt5/qt5charts/qt5charts.hash b/package/qt5/qt5charts/qt5charts.hash index ba22e29996..0688f64615 100644 --- a/package/qt5/qt5charts/qt5charts.hash +++ b/package/qt5/qt5charts/qt5charts.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 32119f7ac88c250b24835b91a71510bf673f1cede6e572fd1059debf8325d7ff qtcharts-16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5.tar.bz2 +sha256 9d2ad94a054bd7df08e5d11bc77b6422ccecbf99ea8dd6f06908bafc72ea869d qtcharts-841083c263f16f8acb81e4915bf24bbed0461c9a.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5charts/qt5charts.mk b/package/qt5/qt5charts/qt5charts.mk index 0028c9f8cb..fa69263be4 100644 --- a/package/qt5/qt5charts/qt5charts.mk +++ b/package/qt5/qt5charts/qt5charts.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5CHARTS_VERSION = 16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5 +QT5CHARTS_VERSION = 841083c263f16f8acb81e4915bf24bbed0461c9a QT5CHARTS_SITE = $(QT5_SITE)/qtcharts/-/archive/$(QT5CHARTS_VERSION) QT5CHARTS_SOURCE = qtcharts-$(QT5CHARTS_VERSION).tar.bz2 QT5CHARTS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5declarative/qt5declarative.hash b/package/qt5/qt5declarative/qt5declarative.hash index 00c9a04432..0e7978dc58 100644 --- a/package/qt5/qt5declarative/qt5declarative.hash +++ b/package/qt5/qt5declarative/qt5declarative.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0dd6b29bb19ad419d47d1fb612b39b1834d675fd1c58b80cd85c7d3da98b40bf qtdeclarative-51efb2ed2f071beda188270a23ac450fe4b318f7.tar.bz2 +sha256 dbe0cdf84767564a56abf9d0d867c9cfcc754827169357a0f8162309c11882b5 qtdeclarative-b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5declarative/qt5declarative.mk b/package/qt5/qt5declarative/qt5declarative.mk index cece8e476b..18c1608fca 100644 --- a/package/qt5/qt5declarative/qt5declarative.mk +++ b/package/qt5/qt5declarative/qt5declarative.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5DECLARATIVE_VERSION = 51efb2ed2f071beda188270a23ac450fe4b318f7 +QT5DECLARATIVE_VERSION = b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a QT5DECLARATIVE_SITE = $(QT5_SITE)/qtdeclarative/-/archive/$(QT5DECLARATIVE_VERSION) QT5DECLARATIVE_SOURCE = qtdeclarative-$(QT5DECLARATIVE_VERSION).tar.bz2 QT5DECLARATIVE_INSTALL_STAGING = YES diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash index 5de13a176d..95567b2476 100644 --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 83ee3888473fb786c1615c4b98320a9b1eeeb66dbc1ef9743b8339718594e48e qtgraphicaleffects-4c6ec38635aa22cf0854df8e710733c529f4ec02.tar.bz2 +sha256 de41af344889d35252fec9a6b6c78e1f67b7a7be15a5d3986b2ec20e2fcafadc qtgraphicaleffects-e6e1e58ec28fd0f2e6426e6962cc4ccddb493349.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk index e4c464b8c7..f829c67122 100644 --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5GRAPHICALEFFECTS_VERSION = 4c6ec38635aa22cf0854df8e710733c529f4ec02 +QT5GRAPHICALEFFECTS_VERSION = e6e1e58ec28fd0f2e6426e6962cc4ccddb493349 QT5GRAPHICALEFFECTS_SITE = $(QT5_SITE)/qtgraphicaleffects/-/archive/$(QT5GRAPHICALEFFECTS_VERSION) QT5GRAPHICALEFFECTS_SOURCE = qtgraphicaleffects-$(QT5GRAPHICALEFFECTS_VERSION).tar.bz2 QT5GRAPHICALEFFECTS_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5imageformats/qt5imageformats.hash b/package/qt5/qt5imageformats/qt5imageformats.hash index 9b8a788cae..9d821672b3 100644 --- a/package/qt5/qt5imageformats/qt5imageformats.hash +++ b/package/qt5/qt5imageformats/qt5imageformats.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 4ce1982ccf3232d25187286ca4893bcf00b149cf9f6706f06f60d908fab480a0 qtimageformats-b43e31b9f31ec482ddea2066fda7ca9315512815.tar.bz2 +sha256 8bf646d4db7d0099dd49b7c049a64fb585a3e180d73fc2b6edf22a1384529d1d qtimageformats-9044695f4b1acdd7ec24e7b01f6a6ca61f982a75.tar.bz2 # Hashes for license files: sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 diff --git a/package/qt5/qt5imageformats/qt5imageformats.mk b/package/qt5/qt5imageformats/qt5imageformats.mk index 2cc8e0f17b..0ce6e4ffb4 100644 --- a/package/qt5/qt5imageformats/qt5imageformats.mk +++ b/package/qt5/qt5imageformats/qt5imageformats.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5IMAGEFORMATS_VERSION = b43e31b9f31ec482ddea2066fda7ca9315512815 +QT5IMAGEFORMATS_VERSION = 9044695f4b1acdd7ec24e7b01f6a6ca61f982a75 QT5IMAGEFORMATS_SITE = $(QT5_SITE)/qtimageformats/-/archive/$(QT5IMAGEFORMATS_VERSION) QT5IMAGEFORMATS_SOURCE = qtimageformats-$(QT5IMAGEFORMATS_VERSION).tar.bz2 QT5IMAGEFORMATS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5location/qt5location.hash b/package/qt5/qt5location/qt5location.hash index e41b20fd9b..f73053f388 100644 --- a/package/qt5/qt5location/qt5location.hash +++ b/package/qt5/qt5location/qt5location.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f9673cb1e5b88b4c43d663d7b9b666ff82d6843bf2b445805367cf537839a782 qt5location-db3b6bc6afed6477e6ab2d8465e41efee30fb6d5-br1.tar.gz +sha256 90b57a335d8c7311a86865a56b2b9cd944a8a1cafa6a7499de5b35a105c5b247 qt5location-ebdf5b38da6e3fe0a183702bcca395c589c459ed-br1.tar.gz # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5location/qt5location.mk b/package/qt5/qt5location/qt5location.mk index a61994fa53..904d31a983 100644 --- a/package/qt5/qt5location/qt5location.mk +++ b/package/qt5/qt5location/qt5location.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5LOCATION_VERSION = db3b6bc6afed6477e6ab2d8465e41efee30fb6d5 +QT5LOCATION_VERSION = ebdf5b38da6e3fe0a183702bcca395c589c459ed QT5LOCATION_SITE = $(QT5_SITE)/qtlocation QT5LOCATION_SITE_METHOD = git QT5LOCATION_GIT_SUBMODULES = YES diff --git a/package/qt5/qt5lottie/qt5lottie.hash b/package/qt5/qt5lottie/qt5lottie.hash index c5c71ddf6c..cbd94fd111 100644 --- a/package/qt5/qt5lottie/qt5lottie.hash +++ b/package/qt5/qt5lottie/qt5lottie.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 7e006b7a3608f0737f41682352819c404db4c1506d9ebe82eb4af7b1ae652d14 qtlottie-ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac.tar.bz2 +sha256 82336dd063f8bedc28e9545cc8c0123053434d6c681e470434c80ad3908ca4b0 qtlottie-d40b67401afe7156b03c62c9a4d517b07555fe64.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5lottie/qt5lottie.mk b/package/qt5/qt5lottie/qt5lottie.mk index d02d693401..42a920582a 100644 --- a/package/qt5/qt5lottie/qt5lottie.mk +++ b/package/qt5/qt5lottie/qt5lottie.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5LOTTIE_VERSION = ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac +QT5LOTTIE_VERSION = d40b67401afe7156b03c62c9a4d517b07555fe64 QT5LOTTIE_SITE = $(QT5_SITE)/qtlottie/-/archive/$(QT5LOTTIE_VERSION) QT5LOTTIE_SOURCE = qtlottie-$(QT5LOTTIE_VERSION).tar.bz2 QT5LOTTIE_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5multimedia/qt5multimedia.hash b/package/qt5/qt5multimedia/qt5multimedia.hash index 527e3948b8..4803ef9230 100644 --- a/package/qt5/qt5multimedia/qt5multimedia.hash +++ b/package/qt5/qt5multimedia/qt5multimedia.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 b6a17deafe7ea7ad44e2852a92ea73b0089beaf9f24cb3434d018db9b8170ee6 qtmultimedia-dc0ee181d4c56ff66c989bd3292dad7cc35e234b.tar.bz2 +sha256 842c5be64dafe7a68d2b120e24faffd14af6e4d9d8e9c0aa8bbf4330b3491aa3 qtmultimedia-76f84c545429a1b988b79f971734ef4bc3e6643f.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5multimedia/qt5multimedia.mk b/package/qt5/qt5multimedia/qt5multimedia.mk index bf2126b285..0d0f5dd53d 100644 --- a/package/qt5/qt5multimedia/qt5multimedia.mk +++ b/package/qt5/qt5multimedia/qt5multimedia.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5MULTIMEDIA_VERSION = dc0ee181d4c56ff66c989bd3292dad7cc35e234b +QT5MULTIMEDIA_VERSION = 76f84c545429a1b988b79f971734ef4bc3e6643f QT5MULTIMEDIA_SITE = $(QT5_SITE)/qtmultimedia/-/archive/$(QT5MULTIMEDIA_VERSION) QT5MULTIMEDIA_SOURCE = qtmultimedia-$(QT5MULTIMEDIA_VERSION).tar.bz2 QT5MULTIMEDIA_INSTALL_STAGING = YES diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash index 45af81c99f..05a021e8b2 100644 --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c2ddcf9c524ef12a0786c410ac4b3c6d4be9aa17db71f2ea8c57ff615fda62dd qtquickcontrols-d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b.tar.bz2 +sha256 e2c7bc6346a8eb4c21510f8fbf7e752648f68a0c5af8525a784e64503570f72c qtquickcontrols-e62b8b6d2f45a79652238b33f4bbe23023004ae7.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk index 5903e6d69c..25c1a74f5c 100644 --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKCONTROLS_VERSION = d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b +QT5QUICKCONTROLS_VERSION = e62b8b6d2f45a79652238b33f4bbe23023004ae7 QT5QUICKCONTROLS_SITE = $(QT5_SITE)/qtquickcontrols/-/archive/$(QT5QUICKCONTROLS_VERSION) QT5QUICKCONTROLS_SOURCE = qtquickcontrols-$(QT5QUICKCONTROLS_VERSION).tar.bz2 QT5QUICKCONTROLS_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash index 7d81b61407..88777a5cc3 100644 --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0c4204257be906c13f863b9481bb20ad616c9a80a074b6f160f863ac046dad27 qtquickcontrols2-0d3d39e821ea7634c174a29910c18d7101bce6f7.tar.bz2 +sha256 53caea73e6bdf234cb445067be3bc4e07ed59af7da967638ac598188b719958e qtquickcontrols2-74e8db97fdb9b55c4b4614b83f4bf17e00df55e9.tar.bz2 # Hashes for license files: sha256 d2cfc059acb4abd8e513cd0a73cd8489f34cbafa7bc34d5d31fb3210821cf8ca LICENSE.GPLv3 diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk index f847ec95ab..1732921203 100644 --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKCONTROLS2_VERSION = 0d3d39e821ea7634c174a29910c18d7101bce6f7 +QT5QUICKCONTROLS2_VERSION = 74e8db97fdb9b55c4b4614b83f4bf17e00df55e9 QT5QUICKCONTROLS2_SITE = $(QT5_SITE)/qtquickcontrols2/-/archive/$(QT5QUICKCONTROLS2_VERSION) QT5QUICKCONTROLS2_SOURCE = qtquickcontrols2-$(QT5QUICKCONTROLS2_VERSION).tar.bz2 QT5QUICKCONTROLS2_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash index e68f66edd8..a8acf3c5a2 100644 --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 ab113ead993206de4025c78fd2babea69824f52ff88fa78451b6bbcb932a6ab6 qtquicktimeline-2ce816fa5822bcc1c47678447405b2e5dc1312c1.tar.bz2 +sha256 d22637609c4afcc7560d92c894eb55d4afa01706bb5c86499bf56f7c8723a605 qtquicktimeline-87ad61716a7cba5a070d8a7b1756c8b2b48d5d53.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk index 70cca38ff4..de94bd0375 100644 --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKTIMELINE_VERSION = 2ce816fa5822bcc1c47678447405b2e5dc1312c1 +QT5QUICKTIMELINE_VERSION = 87ad61716a7cba5a070d8a7b1756c8b2b48d5d53 QT5QUICKTIMELINE_SITE = $(QT5_SITE)/qtquicktimeline/-/archive/$(QT5QUICKTIMELINE_VERSION) QT5QUICKTIMELINE_SOURCE = qtquicktimeline-$(QT5QUICKTIMELINE_VERSION).tar.bz2 QT5QUICKTIMELINE_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash index 980101c7fb..1b41ab675f 100644 --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f51631a142ac47a03266496dae9d07c734f092a0afe8c4e18cd78b7cf9c17b38 qtremoteobjects-809412e1cc2151c21f843796ef67705600f6aafb.tar.bz2 +sha256 ef8e1f64911f7e03da6306693031fdf953af00d453ec154497178bb7ceab1aa2 qtremoteobjects-aa705010da0f658b78c1155babce7091ae44529a.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk index 984f392dda..3160d37ad7 100644 --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5REMOTEOBJECTS_VERSION = 809412e1cc2151c21f843796ef67705600f6aafb +QT5REMOTEOBJECTS_VERSION = aa705010da0f658b78c1155babce7091ae44529a QT5REMOTEOBJECTS_SITE = $(QT5_SITE)/qtremoteobjects/-/archive/$(QT5REMOTEOBJECTS_VERSION) QT5REMOTEOBJECTS_SOURCE = qtremoteobjects-$(QT5REMOTEOBJECTS_VERSION).tar.bz2 QT5REMOTEOBJECTS_DEPENDENCIES = qt5base diff --git a/package/qt5/qt5script/qt5script.hash b/package/qt5/qt5script/qt5script.hash index b3e10491fd..d6572be818 100644 --- a/package/qt5/qt5script/qt5script.hash +++ b/package/qt5/qt5script/qt5script.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fc625c1682d7ee5d1092255408cbaf08d5cac52eb45bacd3ab52937dc84d91f2 qtscript-5cec94b2c1503f106f4ef4778d016410ebb86211.tar.bz2 +sha256 7731d8c85636d039a2b35a9ee0de7b5ebb0c3900a9b4845676041ce91f56f01f qtscript-f237e324508dcf0dbabde9dd498eda9fa61c4ff0.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5script/qt5script.mk b/package/qt5/qt5script/qt5script.mk index 313895f11b..96cbbfbbad 100644 --- a/package/qt5/qt5script/qt5script.mk +++ b/package/qt5/qt5script/qt5script.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SCRIPT_VERSION = 5cec94b2c1503f106f4ef4778d016410ebb86211 +QT5SCRIPT_VERSION = f237e324508dcf0dbabde9dd498eda9fa61c4ff0 QT5SCRIPT_SITE = $(QT5_SITE)/qtscript/-/archive/$(QT5SCRIPT_VERSION) QT5SCRIPT_SOURCE = qtscript-$(QT5SCRIPT_VERSION).tar.bz2 QT5SCRIPT_INSTALL_STAGING = YES diff --git a/package/qt5/qt5scxml/qt5scxml.hash b/package/qt5/qt5scxml/qt5scxml.hash index 1c11ae5853..f4d52b8a52 100644 --- a/package/qt5/qt5scxml/qt5scxml.hash +++ b/package/qt5/qt5scxml/qt5scxml.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 5fc3e6166ab3588242864c5d8f18235a45f5c3396482ccfeb8590fe67d0cd549 qtscxml-dcbd73cf3e8a07dbfa249d7db2257caafa83781b.tar.bz2 +sha256 a0113f54d9df14ebae15dd85530f87f093a284372ee8237d1ccceb02e6a4607b qtscxml-631fd7bcc34802b7650c2b1dc73691463954d982.tar.bz2 # Hashes for license files: sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT diff --git a/package/qt5/qt5scxml/qt5scxml.mk b/package/qt5/qt5scxml/qt5scxml.mk index af18b84e9d..f6ccb9298e 100644 --- a/package/qt5/qt5scxml/qt5scxml.mk +++ b/package/qt5/qt5scxml/qt5scxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SCXML_VERSION = dcbd73cf3e8a07dbfa249d7db2257caafa83781b +QT5SCXML_VERSION = 631fd7bcc34802b7650c2b1dc73691463954d982 QT5SCXML_SITE = $(QT5_SITE)/qtscxml/-/archive/$(QT5SCXML_VERSION) QT5SCXML_SOURCE = qtscxml-$(QT5SCXML_VERSION).tar.bz2 QT5SCXML_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5sensors/qt5sensors.hash b/package/qt5/qt5sensors/qt5sensors.hash index 559f02e7f6..d43fa8ba65 100644 --- a/package/qt5/qt5sensors/qt5sensors.hash +++ b/package/qt5/qt5sensors/qt5sensors.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fa0ffba89fed2086d06dab84074cdd789acbfb89da6f64c40a64fc3bc067832e qtsensors-1ab8d6c7257f9ec060739b648704be1cf1c16b05.tar.bz2 +sha256 8325826a259189fc7dea66651df4022a92a73664e953f86bce5bf5946ebacdf5 qtsensors-35eb5ac7eaef4745a38958c3ca780d7baa2e4f30.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5sensors/qt5sensors.mk b/package/qt5/qt5sensors/qt5sensors.mk index 299fab3db0..40bb72e038 100644 --- a/package/qt5/qt5sensors/qt5sensors.mk +++ b/package/qt5/qt5sensors/qt5sensors.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SENSORS_VERSION = 1ab8d6c7257f9ec060739b648704be1cf1c16b05 +QT5SENSORS_VERSION = 35eb5ac7eaef4745a38958c3ca780d7baa2e4f30 QT5SENSORS_SITE = $(QT5_SITE)/qtsensors/-/archive/$(QT5SENSORS_VERSION) QT5SENSORS_SOURCE = qtsensors-$(QT5SENSORS_VERSION).tar.bz2 QT5SENSORS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5serialbus/qt5serialbus.hash b/package/qt5/qt5serialbus/qt5serialbus.hash index b8f96cf0c0..01ffd7c215 100644 --- a/package/qt5/qt5serialbus/qt5serialbus.hash +++ b/package/qt5/qt5serialbus/qt5serialbus.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 caaccfdabdf502c3aacf9fa842ed31ed7682cab6ada69b06be1ba49273fb1f1c qtserialbus-e34053fbda8d687e3dc294fbd5e3a88bf94a7a66.tar.bz2 +sha256 fe08415d2348797429dc09722478630ceee3d7477652a2712460e79127b7291b qtserialbus-f9f7eee60adac72fcf6617d164e3bf61222bb5c5.tar.bz2 # Hashes for license files: sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 diff --git a/package/qt5/qt5serialbus/qt5serialbus.mk b/package/qt5/qt5serialbus/qt5serialbus.mk index 70f23ce407..c718414932 100644 --- a/package/qt5/qt5serialbus/qt5serialbus.mk +++ b/package/qt5/qt5serialbus/qt5serialbus.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SERIALBUS_VERSION = e34053fbda8d687e3dc294fbd5e3a88bf94a7a66 +QT5SERIALBUS_VERSION = f9f7eee60adac72fcf6617d164e3bf61222bb5c5 QT5SERIALBUS_SITE = $(QT5_SITE)/qtserialbus/-/archive/$(QT5SERIALBUS_VERSION) QT5SERIALBUS_SOURCE = qtserialbus-$(QT5SERIALBUS_VERSION).tar.bz2 QT5SERIALBUS_DEPENDENCIES = qt5serialport diff --git a/package/qt5/qt5serialport/qt5serialport.hash b/package/qt5/qt5serialport/qt5serialport.hash index d25b2193e7..58461430c7 100644 --- a/package/qt5/qt5serialport/qt5serialport.hash +++ b/package/qt5/qt5serialport/qt5serialport.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 83abb0c5b9c435a031abf1a36d6d44f8e3f5e2fc16150bdc78c6d33b25386bb6 qtserialport-191e67e428522a0e2e1e8d2f3440607a9760d441.tar.bz2 +sha256 6d49d0da174632f51291b0190f6f1db2397a3b339cf293514252766f8a20c63b qtserialport-c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5serialport/qt5serialport.mk b/package/qt5/qt5serialport/qt5serialport.mk index cd96df2007..7d00bd2ab7 100644 --- a/package/qt5/qt5serialport/qt5serialport.mk +++ b/package/qt5/qt5serialport/qt5serialport.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SERIALPORT_VERSION = 191e67e428522a0e2e1e8d2f3440607a9760d441 +QT5SERIALPORT_VERSION = c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694 QT5SERIALPORT_SITE = $(QT5_SITE)/qtserialport/-/archive/$(QT5SERIALPORT_VERSION) QT5SERIALPORT_SOURCE = qtserialport-$(QT5SERIALPORT_VERSION).tar.bz2 QT5SERIALPORT_INSTALL_STAGING = YES diff --git a/package/qt5/qt5svg/qt5svg.hash b/package/qt5/qt5svg/qt5svg.hash index 424891ac2c..4816206d64 100644 --- a/package/qt5/qt5svg/qt5svg.hash +++ b/package/qt5/qt5svg/qt5svg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 eeb4175f0b2c3299abf0ca9d751886612dad5ecd212c954f9801b28b4696f4f7 qtsvg-23b8cf7d833c335d7735855570c05e9e0893a9b7.tar.bz2 +sha256 063ee53515b934c00a65838fe8521142e4a9161b07c8e19b5bb0ea26a0ce9ab3 qtsvg-a9752b00a03438de8e5b080073816e12409404b7.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5svg/qt5svg.mk b/package/qt5/qt5svg/qt5svg.mk index 3072fd7a18..2a39ed18fe 100644 --- a/package/qt5/qt5svg/qt5svg.mk +++ b/package/qt5/qt5svg/qt5svg.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SVG_VERSION = 23b8cf7d833c335d7735855570c05e9e0893a9b7 +QT5SVG_VERSION = a9752b00a03438de8e5b080073816e12409404b7 QT5SVG_SITE = $(QT5_SITE)/qtsvg/-/archive/$(QT5SVG_VERSION) QT5SVG_SOURCE = qtsvg-$(QT5SVG_VERSION).tar.bz2 QT5SVG_INSTALL_STAGING = YES diff --git a/package/qt5/qt5tools/qt5tools.hash b/package/qt5/qt5tools/qt5tools.hash index 58ed752b9b..d603598257 100644 --- a/package/qt5/qt5tools/qt5tools.hash +++ b/package/qt5/qt5tools/qt5tools.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 76052a183a41fcddfd4446ffba6a99c3e77a21453fe629cf67379ffa617a0d53 qttools-53ee43a51b5a3de2877dafffc78e71ff55926708.tar.bz2 +sha256 b6eebbd61dcde981d63ce6de39b3c957bad8f11b0140585ba4d57d166c4dd79d qttools-32912a06aadfc3dcbc34e0a668ce2c78351eee6e.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5tools/qt5tools.mk b/package/qt5/qt5tools/qt5tools.mk index e87c9b50a5..a01a336584 100644 --- a/package/qt5/qt5tools/qt5tools.mk +++ b/package/qt5/qt5tools/qt5tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5TOOLS_VERSION = 53ee43a51b5a3de2877dafffc78e71ff55926708 +QT5TOOLS_VERSION = 32912a06aadfc3dcbc34e0a668ce2c78351eee6e QT5TOOLS_SITE = $(QT5_SITE)/qttools/-/archive/$(QT5TOOLS_VERSION) QT5TOOLS_SOURCE = qttools-$(QT5TOOLS_VERSION).tar.bz2 diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash index 1cdd8f0386..60d51fa5fe 100644 --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 6ef14ba8bb5eb287320b6c0d6e61c5c2916a94ef754bb8a2d89c123043485d67 qtvirtualkeyboard-e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db.tar.bz2 +sha256 e1e356e81f3a3fb5da6f6739aa475c15aab15090e202de6704441a3bf41c335b qtvirtualkeyboard-9fbb837b55887bec5d73fad142c853ef68db35b3.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk index c31d455c4e..067db80330 100644 --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5VIRTUALKEYBOARD_VERSION = e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db +QT5VIRTUALKEYBOARD_VERSION = 9fbb837b55887bec5d73fad142c853ef68db35b3 QT5VIRTUALKEYBOARD_SITE = $(QT5_SITE)/qtvirtualkeyboard/-/archive/$(QT5VIRTUALKEYBOARD_VERSION) QT5VIRTUALKEYBOARD_SOURCE = qtvirtualkeyboard-$(QT5VIRTUALKEYBOARD_VERSION).tar.bz2 QT5VIRTUALKEYBOARD_DEPENDENCIES = qt5declarative qt5svg diff --git a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch b/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch deleted file mode 100644 index adad3768b2..0000000000 --- a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 05658e127dedfff65789860415537c6920ec574d Mon Sep 17 00:00:00 2001 -From: Samuli Piippo -Date: Thu, 22 Apr 2021 15:29:56 +0300 -Subject: [PATCH] Add missing define guards - -Ammend cca1b94190a094b5d1d7ce492b6533e2d330c5e8 to use m_composeState -only if xcbcommon is available. - -Pick-to: 5.15 -Change-Id: I48332b15def3282c5bda3e1c7c393ea7e9849cbe -Reviewed-by: Aleix Pol Gonzalez -[Backported from: 05658e127dedfff65789860415537c6920ec574d] -Signed-off-by: Quentin Schulz ---- - src/client/qwaylandinputcontext.cpp | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/src/client/qwaylandinputcontext.cpp b/src/client/qwaylandinputcontext.cpp -index 16e03ea1..cbf63cde 100644 ---- a/src/client/qwaylandinputcontext.cpp -+++ b/src/client/qwaylandinputcontext.cpp -@@ -408,8 +408,10 @@ bool QWaylandInputContext::isValid() const - void QWaylandInputContext::reset() - { - qCDebug(qLcQpaInputMethods) << Q_FUNC_INFO; -+#if QT_CONFIG(xkbcommon) - if (m_composeState) - xkb_compose_state_reset(m_composeState); -+#endif - - QPlatformInputContext::reset(); - --- -2.35.1 - diff --git a/package/qt5/qt5wayland/qt5wayland.hash b/package/qt5/qt5wayland/qt5wayland.hash index 58935ceadc..c9d7f3434c 100644 --- a/package/qt5/qt5wayland/qt5wayland.hash +++ b/package/qt5/qt5wayland/qt5wayland.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 bfe9bce353c036356dc7bca04e634f03c7c924381062ce89627a88df0ae7484e qtwayland-36659e6130ed3fc2b3f0c91423408ef5ecb7b991.tar.bz2 +sha256 c881745403a7c3639ee928f64ac9e7252d7a941cb62ef682a7ee83ccf3ae0a60 qtwayland-8faf74a7966b520f0ac3eb4d88235f8ec63b31b8.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5wayland/qt5wayland.mk b/package/qt5/qt5wayland/qt5wayland.mk index 63fa1f21c0..aeca1b0381 100644 --- a/package/qt5/qt5wayland/qt5wayland.mk +++ b/package/qt5/qt5wayland/qt5wayland.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5WAYLAND_VERSION = 36659e6130ed3fc2b3f0c91423408ef5ecb7b991 +QT5WAYLAND_VERSION = 8faf74a7966b520f0ac3eb4d88235f8ec63b31b8 QT5WAYLAND_SITE = $(QT5_SITE)/qtwayland/-/archive/$(QT5WAYLAND_VERSION) QT5WAYLAND_SOURCE = qtwayland-$(QT5WAYLAND_VERSION).tar.bz2 QT5WAYLAND_DEPENDENCIES = wayland diff --git a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch index dff3e6c849..aeec4c58b1 100644 --- a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch +++ b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch @@ -28,24 +28,25 @@ linking statically by default. [1] https://github.com/qt/qtwebengine-chromium/commit/cfab9198a9917f42cf08b1caf84ab9b71aac1911#diff-905c8f054808213577c0a92d1b704615 Signed-off-by: Romain Naour +Signed-off-by: Giulio Benetti +[Giulio: rebased to qt5.15.10] --- src/buildtools/gn.pro | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/buildtools/gn.pro b/src/buildtools/gn.pro -index 033202e6..5dd8e241 100644 +index f94694da0..19079a5b3 100644 --- a/src/buildtools/gn.pro +++ b/src/buildtools/gn.pro @@ -20,7 +20,8 @@ build_pass|!debug_and_release { - + gn_gen_args = --no-last-commit-position --out-path $$out_path \ --cc \"$$which($$QMAKE_CC)\" --cxx \"$$which($$QMAKE_CXX)\" \ - --ld \"$$which($$QMAKE_LINK)\" + --ld \"$$which($$QMAKE_LINK)\" \ + --no-static-libstdc++ - - msvc:!clang_cl: gn_gen_args += --use-lto - --- -2.25.4 + !isEmpty(QMAKE_AR): gn_gen_args += --ar \"$$which($$first(QMAKE_AR))\" + msvc:!clang_cl: gn_gen_args += --use-lto +-- +2.34.1 diff --git a/package/qt5/qt5webengine/qt5webengine.hash b/package/qt5/qt5webengine/qt5webengine.hash index 1d2b70c4f6..038446a9f4 100644 --- a/package/qt5/qt5webengine/qt5webengine.hash +++ b/package/qt5/qt5webengine/qt5webengine.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fb7abcf88d4336d55565627e18b33df1855fefb0f12e24931b6a7decbe60913b qtwebengine-v5.15.8-lts.tar.bz2 +sha256 4a3456df42e1c1b859232b3ee1d58360e629d55daf6e5ad308871142c1b0c2fa qtwebengine-v5.15.10-lts.tar.bz2 # Locally calculated sha256 f34787ef0342c614b667186a6ec2f5d6b9d650e30142a2788a589a89743e88e9 LICENSE.Chromium diff --git a/package/qt5/qt5webview/qt5webview.mk b/package/qt5/qt5webview/qt5webview.mk index 54da733e7b..a55fd8ae74 100644 --- a/package/qt5/qt5webview/qt5webview.mk +++ b/package/qt5/qt5webview/qt5webview.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5WEBVIEW_VERSION = 826d2a33929c69807917536d48b7861e7682001e +QT5WEBVIEW_VERSION = 87577dde04ed219bda776dabca86176149736331 QT5WEBVIEW_SITE = $(QT5_SITE)/qtwebview/-/archive/$(QT5WEBVIEW_VERSION) QT5WEBVIEW_SOURCE = qtwebview-$(QT5WEBVIEW_VERSION).tar.bz2 QT5WEBVIEW_DEPENDENCIES = qt5webengine diff --git a/package/qt5/qt5x11extras/qt5x11extras.mk b/package/qt5/qt5x11extras/qt5x11extras.mk index fb6650e84a..80c5498518 100644 --- a/package/qt5/qt5x11extras/qt5x11extras.mk +++ b/package/qt5/qt5x11extras/qt5x11extras.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5X11EXTRAS_VERSION = 51b0a5a2e3e35f4cb17da1e7cb4babef6294bfb4 +QT5X11EXTRAS_VERSION = 982f20eb585d77e5b5c721e05a466d7161f7f2d1 QT5X11EXTRAS_SITE = $(QT5_SITE)/qtx11extras/-/archive/$(QT5X11EXTRAS_VERSION) QT5X11EXTRAS_SOURCE = qtx11extras-$(QT5X11EXTRAS_VERSION).tar.bz2 QT5X11EXTRAS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash index a1dbb40154..353dfc8485 100644 --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 6243e6334c0d1467e3e5bdecd981d7e673f4cc99cf2cee3b99597be4218a4bd2 qtxmlpatterns-dfcae10dec8c1c2c544ad0cd303cea113b0af51d.tar.bz2 +sha256 067b801049f6fada8e7ebcfbce0530db6217a1a94b8ed34c99c530be4129889d qtxmlpatterns-30e6c84fe2752cde8b53aff9d38c2095cd7c8761.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk index 6711e9bf70..803c36cf04 100644 --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5XMLPATTERNS_VERSION = dfcae10dec8c1c2c544ad0cd303cea113b0af51d +QT5XMLPATTERNS_VERSION = 30e6c84fe2752cde8b53aff9d38c2095cd7c8761 QT5XMLPATTERNS_SITE = $(QT5_SITE)/qtxmlpatterns/-/archive/$(QT5XMLPATTERNS_VERSION) QT5XMLPATTERNS_SOURCE = qtxmlpatterns-$(QT5XMLPATTERNS_VERSION).tar.bz2 QT5XMLPATTERNS_INSTALL_STAGING = YES -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 12 19:18:21 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 21:18:21 +0200 Subject: [Buildroot] [PATCH] package/qt5: bump packages to latest kde submodule versions In-Reply-To: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> References: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> Message-ID: <0700d1b5-83e3-961d-f3d8-17a1a56f1d92@benettiengineering.com> Sorry I've forgotten: On 12/10/22 21:05, Giulio Benetti wrote: > Bump qt5 packages to latest submodule versions from: > https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15 > > Drop a qt5wayland patch which is now upstream. Drop a qt5wayland and a qt5virtualkeyboard local patches that are now upstream. Best regards -- Giulio Benetti Benetti Engineering sas > > Signed-off-by: Giulio Benetti > --- > package/qt5/qt5.mk | 2 +- > package/qt5/qt5base/qt5base.hash | 2 +- > package/qt5/qt5base/qt5base.mk | 2 +- > package/qt5/qt5charts/qt5charts.hash | 2 +- > package/qt5/qt5charts/qt5charts.mk | 2 +- > .../qt5/qt5declarative/qt5declarative.hash | 2 +- > package/qt5/qt5declarative/qt5declarative.mk | 2 +- > .../qt5graphicaleffects.hash | 2 +- > .../qt5graphicaleffects.mk | 2 +- > .../qt5/qt5imageformats/qt5imageformats.hash | 2 +- > .../qt5/qt5imageformats/qt5imageformats.mk | 2 +- > package/qt5/qt5location/qt5location.hash | 2 +- > package/qt5/qt5location/qt5location.mk | 2 +- > package/qt5/qt5lottie/qt5lottie.hash | 2 +- > package/qt5/qt5lottie/qt5lottie.mk | 2 +- > package/qt5/qt5multimedia/qt5multimedia.hash | 2 +- > package/qt5/qt5multimedia/qt5multimedia.mk | 2 +- > .../qt5quickcontrols/qt5quickcontrols.hash | 2 +- > .../qt5/qt5quickcontrols/qt5quickcontrols.mk | 2 +- > .../qt5quickcontrols2/qt5quickcontrols2.hash | 2 +- > .../qt5quickcontrols2/qt5quickcontrols2.mk | 2 +- > .../qt5quicktimeline/qt5quicktimeline.hash | 2 +- > .../qt5/qt5quicktimeline/qt5quicktimeline.mk | 2 +- > .../qt5remoteobjects/qt5remoteobjects.hash | 2 +- > .../qt5/qt5remoteobjects/qt5remoteobjects.mk | 2 +- > package/qt5/qt5script/qt5script.hash | 2 +- > package/qt5/qt5script/qt5script.mk | 2 +- > package/qt5/qt5scxml/qt5scxml.hash | 2 +- > package/qt5/qt5scxml/qt5scxml.mk | 2 +- > package/qt5/qt5sensors/qt5sensors.hash | 2 +- > package/qt5/qt5sensors/qt5sensors.mk | 2 +- > package/qt5/qt5serialbus/qt5serialbus.hash | 2 +- > package/qt5/qt5serialbus/qt5serialbus.mk | 2 +- > package/qt5/qt5serialport/qt5serialport.hash | 2 +- > package/qt5/qt5serialport/qt5serialport.mk | 2 +- > package/qt5/qt5svg/qt5svg.hash | 2 +- > package/qt5/qt5svg/qt5svg.mk | 2 +- > package/qt5/qt5tools/qt5tools.hash | 2 +- > package/qt5/qt5tools/qt5tools.mk | 2 +- > .../qt5virtualkeyboard.hash | 2 +- > .../qt5virtualkeyboard/qt5virtualkeyboard.mk | 2 +- > .../0001-Add-missing-define-guards.patch | 35 ------------------- > package/qt5/qt5wayland/qt5wayland.hash | 2 +- > package/qt5/qt5wayland/qt5wayland.mk | 2 +- > ...ro-don-t-link-statically-with-libstc.patch | 15 ++++---- > package/qt5/qt5webengine/qt5webengine.hash | 2 +- > package/qt5/qt5webview/qt5webview.mk | 2 +- > package/qt5/qt5x11extras/qt5x11extras.mk | 2 +- > .../qt5/qt5xmlpatterns/qt5xmlpatterns.hash | 2 +- > package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk | 2 +- > 50 files changed, 56 insertions(+), 90 deletions(-) > delete mode 100644 package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > > diff --git a/package/qt5/qt5.mk b/package/qt5/qt5.mk > index 0706c3548d..b55accacf1 100644 > --- a/package/qt5/qt5.mk > +++ b/package/qt5/qt5.mk > @@ -5,7 +5,7 @@ > ################################################################################ > > QT5_VERSION_MAJOR = 5.15 > -QT5_VERSION = $(QT5_VERSION_MAJOR).8 > +QT5_VERSION = $(QT5_VERSION_MAJOR).10 > QT5_SITE = https://invent.kde.org/qt/qt > > include $(sort $(wildcard package/qt5/*/*.mk)) > diff --git a/package/qt5/qt5base/qt5base.hash b/package/qt5/qt5base/qt5base.hash > index 27d2b99c34..4efc8fa172 100644 > --- a/package/qt5/qt5base/qt5base.hash > +++ b/package/qt5/qt5base/qt5base.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 ecff8cf42af98c2294f7c99eb8c41564892f470382adaf8f4048c85252849808 qtbase-2ffb7ad8a1079a0444b9c72affe3d19b089b60de.tar.bz2 > +sha256 5622a9053154af9a353b8e8be217104c6af068b5b5aba8b07ef4fea2dc79fded qtbase-e44097b63d17ba3178a637df7fac51ddc51cb48b.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5base/qt5base.mk b/package/qt5/qt5base/qt5base.mk > index efa0e16e9a..028236d2ed 100644 > --- a/package/qt5/qt5base/qt5base.mk > +++ b/package/qt5/qt5base/qt5base.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5BASE_VERSION = 2ffb7ad8a1079a0444b9c72affe3d19b089b60de > +QT5BASE_VERSION = e44097b63d17ba3178a637df7fac51ddc51cb48b > QT5BASE_SITE = $(QT5_SITE)/qtbase/-/archive/$(QT5BASE_VERSION) > QT5BASE_SOURCE = qtbase-$(QT5BASE_VERSION).tar.bz2 > > diff --git a/package/qt5/qt5charts/qt5charts.hash b/package/qt5/qt5charts/qt5charts.hash > index ba22e29996..0688f64615 100644 > --- a/package/qt5/qt5charts/qt5charts.hash > +++ b/package/qt5/qt5charts/qt5charts.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 32119f7ac88c250b24835b91a71510bf673f1cede6e572fd1059debf8325d7ff qtcharts-16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5.tar.bz2 > +sha256 9d2ad94a054bd7df08e5d11bc77b6422ccecbf99ea8dd6f06908bafc72ea869d qtcharts-841083c263f16f8acb81e4915bf24bbed0461c9a.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5charts/qt5charts.mk b/package/qt5/qt5charts/qt5charts.mk > index 0028c9f8cb..fa69263be4 100644 > --- a/package/qt5/qt5charts/qt5charts.mk > +++ b/package/qt5/qt5charts/qt5charts.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5CHARTS_VERSION = 16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5 > +QT5CHARTS_VERSION = 841083c263f16f8acb81e4915bf24bbed0461c9a > QT5CHARTS_SITE = $(QT5_SITE)/qtcharts/-/archive/$(QT5CHARTS_VERSION) > QT5CHARTS_SOURCE = qtcharts-$(QT5CHARTS_VERSION).tar.bz2 > QT5CHARTS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5declarative/qt5declarative.hash b/package/qt5/qt5declarative/qt5declarative.hash > index 00c9a04432..0e7978dc58 100644 > --- a/package/qt5/qt5declarative/qt5declarative.hash > +++ b/package/qt5/qt5declarative/qt5declarative.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 0dd6b29bb19ad419d47d1fb612b39b1834d675fd1c58b80cd85c7d3da98b40bf qtdeclarative-51efb2ed2f071beda188270a23ac450fe4b318f7.tar.bz2 > +sha256 dbe0cdf84767564a56abf9d0d867c9cfcc754827169357a0f8162309c11882b5 qtdeclarative-b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5declarative/qt5declarative.mk b/package/qt5/qt5declarative/qt5declarative.mk > index cece8e476b..18c1608fca 100644 > --- a/package/qt5/qt5declarative/qt5declarative.mk > +++ b/package/qt5/qt5declarative/qt5declarative.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5DECLARATIVE_VERSION = 51efb2ed2f071beda188270a23ac450fe4b318f7 > +QT5DECLARATIVE_VERSION = b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a > QT5DECLARATIVE_SITE = $(QT5_SITE)/qtdeclarative/-/archive/$(QT5DECLARATIVE_VERSION) > QT5DECLARATIVE_SOURCE = qtdeclarative-$(QT5DECLARATIVE_VERSION).tar.bz2 > QT5DECLARATIVE_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > index 5de13a176d..95567b2476 100644 > --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 83ee3888473fb786c1615c4b98320a9b1eeeb66dbc1ef9743b8339718594e48e qtgraphicaleffects-4c6ec38635aa22cf0854df8e710733c529f4ec02.tar.bz2 > +sha256 de41af344889d35252fec9a6b6c78e1f67b7a7be15a5d3986b2ec20e2fcafadc qtgraphicaleffects-e6e1e58ec28fd0f2e6426e6962cc4ccddb493349.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > index e4c464b8c7..f829c67122 100644 > --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5GRAPHICALEFFECTS_VERSION = 4c6ec38635aa22cf0854df8e710733c529f4ec02 > +QT5GRAPHICALEFFECTS_VERSION = e6e1e58ec28fd0f2e6426e6962cc4ccddb493349 > QT5GRAPHICALEFFECTS_SITE = $(QT5_SITE)/qtgraphicaleffects/-/archive/$(QT5GRAPHICALEFFECTS_VERSION) > QT5GRAPHICALEFFECTS_SOURCE = qtgraphicaleffects-$(QT5GRAPHICALEFFECTS_VERSION).tar.bz2 > QT5GRAPHICALEFFECTS_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5imageformats/qt5imageformats.hash b/package/qt5/qt5imageformats/qt5imageformats.hash > index 9b8a788cae..9d821672b3 100644 > --- a/package/qt5/qt5imageformats/qt5imageformats.hash > +++ b/package/qt5/qt5imageformats/qt5imageformats.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 4ce1982ccf3232d25187286ca4893bcf00b149cf9f6706f06f60d908fab480a0 qtimageformats-b43e31b9f31ec482ddea2066fda7ca9315512815.tar.bz2 > +sha256 8bf646d4db7d0099dd49b7c049a64fb585a3e180d73fc2b6edf22a1384529d1d qtimageformats-9044695f4b1acdd7ec24e7b01f6a6ca61f982a75.tar.bz2 > > # Hashes for license files: > sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 > diff --git a/package/qt5/qt5imageformats/qt5imageformats.mk b/package/qt5/qt5imageformats/qt5imageformats.mk > index 2cc8e0f17b..0ce6e4ffb4 100644 > --- a/package/qt5/qt5imageformats/qt5imageformats.mk > +++ b/package/qt5/qt5imageformats/qt5imageformats.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5IMAGEFORMATS_VERSION = b43e31b9f31ec482ddea2066fda7ca9315512815 > +QT5IMAGEFORMATS_VERSION = 9044695f4b1acdd7ec24e7b01f6a6ca61f982a75 > QT5IMAGEFORMATS_SITE = $(QT5_SITE)/qtimageformats/-/archive/$(QT5IMAGEFORMATS_VERSION) > QT5IMAGEFORMATS_SOURCE = qtimageformats-$(QT5IMAGEFORMATS_VERSION).tar.bz2 > QT5IMAGEFORMATS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5location/qt5location.hash b/package/qt5/qt5location/qt5location.hash > index e41b20fd9b..f73053f388 100644 > --- a/package/qt5/qt5location/qt5location.hash > +++ b/package/qt5/qt5location/qt5location.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f9673cb1e5b88b4c43d663d7b9b666ff82d6843bf2b445805367cf537839a782 qt5location-db3b6bc6afed6477e6ab2d8465e41efee30fb6d5-br1.tar.gz > +sha256 90b57a335d8c7311a86865a56b2b9cd944a8a1cafa6a7499de5b35a105c5b247 qt5location-ebdf5b38da6e3fe0a183702bcca395c589c459ed-br1.tar.gz > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5location/qt5location.mk b/package/qt5/qt5location/qt5location.mk > index a61994fa53..904d31a983 100644 > --- a/package/qt5/qt5location/qt5location.mk > +++ b/package/qt5/qt5location/qt5location.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5LOCATION_VERSION = db3b6bc6afed6477e6ab2d8465e41efee30fb6d5 > +QT5LOCATION_VERSION = ebdf5b38da6e3fe0a183702bcca395c589c459ed > QT5LOCATION_SITE = $(QT5_SITE)/qtlocation > QT5LOCATION_SITE_METHOD = git > QT5LOCATION_GIT_SUBMODULES = YES > diff --git a/package/qt5/qt5lottie/qt5lottie.hash b/package/qt5/qt5lottie/qt5lottie.hash > index c5c71ddf6c..cbd94fd111 100644 > --- a/package/qt5/qt5lottie/qt5lottie.hash > +++ b/package/qt5/qt5lottie/qt5lottie.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 7e006b7a3608f0737f41682352819c404db4c1506d9ebe82eb4af7b1ae652d14 qtlottie-ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac.tar.bz2 > +sha256 82336dd063f8bedc28e9545cc8c0123053434d6c681e470434c80ad3908ca4b0 qtlottie-d40b67401afe7156b03c62c9a4d517b07555fe64.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5lottie/qt5lottie.mk b/package/qt5/qt5lottie/qt5lottie.mk > index d02d693401..42a920582a 100644 > --- a/package/qt5/qt5lottie/qt5lottie.mk > +++ b/package/qt5/qt5lottie/qt5lottie.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5LOTTIE_VERSION = ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac > +QT5LOTTIE_VERSION = d40b67401afe7156b03c62c9a4d517b07555fe64 > QT5LOTTIE_SITE = $(QT5_SITE)/qtlottie/-/archive/$(QT5LOTTIE_VERSION) > QT5LOTTIE_SOURCE = qtlottie-$(QT5LOTTIE_VERSION).tar.bz2 > QT5LOTTIE_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5multimedia/qt5multimedia.hash b/package/qt5/qt5multimedia/qt5multimedia.hash > index 527e3948b8..4803ef9230 100644 > --- a/package/qt5/qt5multimedia/qt5multimedia.hash > +++ b/package/qt5/qt5multimedia/qt5multimedia.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 b6a17deafe7ea7ad44e2852a92ea73b0089beaf9f24cb3434d018db9b8170ee6 qtmultimedia-dc0ee181d4c56ff66c989bd3292dad7cc35e234b.tar.bz2 > +sha256 842c5be64dafe7a68d2b120e24faffd14af6e4d9d8e9c0aa8bbf4330b3491aa3 qtmultimedia-76f84c545429a1b988b79f971734ef4bc3e6643f.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5multimedia/qt5multimedia.mk b/package/qt5/qt5multimedia/qt5multimedia.mk > index bf2126b285..0d0f5dd53d 100644 > --- a/package/qt5/qt5multimedia/qt5multimedia.mk > +++ b/package/qt5/qt5multimedia/qt5multimedia.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5MULTIMEDIA_VERSION = dc0ee181d4c56ff66c989bd3292dad7cc35e234b > +QT5MULTIMEDIA_VERSION = 76f84c545429a1b988b79f971734ef4bc3e6643f > QT5MULTIMEDIA_SITE = $(QT5_SITE)/qtmultimedia/-/archive/$(QT5MULTIMEDIA_VERSION) > QT5MULTIMEDIA_SOURCE = qtmultimedia-$(QT5MULTIMEDIA_VERSION).tar.bz2 > QT5MULTIMEDIA_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > index 45af81c99f..05a021e8b2 100644 > --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 c2ddcf9c524ef12a0786c410ac4b3c6d4be9aa17db71f2ea8c57ff615fda62dd qtquickcontrols-d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b.tar.bz2 > +sha256 e2c7bc6346a8eb4c21510f8fbf7e752648f68a0c5af8525a784e64503570f72c qtquickcontrols-e62b8b6d2f45a79652238b33f4bbe23023004ae7.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > index 5903e6d69c..25c1a74f5c 100644 > --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKCONTROLS_VERSION = d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b > +QT5QUICKCONTROLS_VERSION = e62b8b6d2f45a79652238b33f4bbe23023004ae7 > QT5QUICKCONTROLS_SITE = $(QT5_SITE)/qtquickcontrols/-/archive/$(QT5QUICKCONTROLS_VERSION) > QT5QUICKCONTROLS_SOURCE = qtquickcontrols-$(QT5QUICKCONTROLS_VERSION).tar.bz2 > QT5QUICKCONTROLS_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > index 7d81b61407..88777a5cc3 100644 > --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 0c4204257be906c13f863b9481bb20ad616c9a80a074b6f160f863ac046dad27 qtquickcontrols2-0d3d39e821ea7634c174a29910c18d7101bce6f7.tar.bz2 > +sha256 53caea73e6bdf234cb445067be3bc4e07ed59af7da967638ac598188b719958e qtquickcontrols2-74e8db97fdb9b55c4b4614b83f4bf17e00df55e9.tar.bz2 > > # Hashes for license files: > sha256 d2cfc059acb4abd8e513cd0a73cd8489f34cbafa7bc34d5d31fb3210821cf8ca LICENSE.GPLv3 > diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > index f847ec95ab..1732921203 100644 > --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKCONTROLS2_VERSION = 0d3d39e821ea7634c174a29910c18d7101bce6f7 > +QT5QUICKCONTROLS2_VERSION = 74e8db97fdb9b55c4b4614b83f4bf17e00df55e9 > QT5QUICKCONTROLS2_SITE = $(QT5_SITE)/qtquickcontrols2/-/archive/$(QT5QUICKCONTROLS2_VERSION) > QT5QUICKCONTROLS2_SOURCE = qtquickcontrols2-$(QT5QUICKCONTROLS2_VERSION).tar.bz2 > QT5QUICKCONTROLS2_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > index e68f66edd8..a8acf3c5a2 100644 > --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 ab113ead993206de4025c78fd2babea69824f52ff88fa78451b6bbcb932a6ab6 qtquicktimeline-2ce816fa5822bcc1c47678447405b2e5dc1312c1.tar.bz2 > +sha256 d22637609c4afcc7560d92c894eb55d4afa01706bb5c86499bf56f7c8723a605 qtquicktimeline-87ad61716a7cba5a070d8a7b1756c8b2b48d5d53.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > index 70cca38ff4..de94bd0375 100644 > --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKTIMELINE_VERSION = 2ce816fa5822bcc1c47678447405b2e5dc1312c1 > +QT5QUICKTIMELINE_VERSION = 87ad61716a7cba5a070d8a7b1756c8b2b48d5d53 > QT5QUICKTIMELINE_SITE = $(QT5_SITE)/qtquicktimeline/-/archive/$(QT5QUICKTIMELINE_VERSION) > QT5QUICKTIMELINE_SOURCE = qtquicktimeline-$(QT5QUICKTIMELINE_VERSION).tar.bz2 > QT5QUICKTIMELINE_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > index 980101c7fb..1b41ab675f 100644 > --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f51631a142ac47a03266496dae9d07c734f092a0afe8c4e18cd78b7cf9c17b38 qtremoteobjects-809412e1cc2151c21f843796ef67705600f6aafb.tar.bz2 > +sha256 ef8e1f64911f7e03da6306693031fdf953af00d453ec154497178bb7ceab1aa2 qtremoteobjects-aa705010da0f658b78c1155babce7091ae44529a.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > index 984f392dda..3160d37ad7 100644 > --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5REMOTEOBJECTS_VERSION = 809412e1cc2151c21f843796ef67705600f6aafb > +QT5REMOTEOBJECTS_VERSION = aa705010da0f658b78c1155babce7091ae44529a > QT5REMOTEOBJECTS_SITE = $(QT5_SITE)/qtremoteobjects/-/archive/$(QT5REMOTEOBJECTS_VERSION) > QT5REMOTEOBJECTS_SOURCE = qtremoteobjects-$(QT5REMOTEOBJECTS_VERSION).tar.bz2 > QT5REMOTEOBJECTS_DEPENDENCIES = qt5base > diff --git a/package/qt5/qt5script/qt5script.hash b/package/qt5/qt5script/qt5script.hash > index b3e10491fd..d6572be818 100644 > --- a/package/qt5/qt5script/qt5script.hash > +++ b/package/qt5/qt5script/qt5script.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fc625c1682d7ee5d1092255408cbaf08d5cac52eb45bacd3ab52937dc84d91f2 qtscript-5cec94b2c1503f106f4ef4778d016410ebb86211.tar.bz2 > +sha256 7731d8c85636d039a2b35a9ee0de7b5ebb0c3900a9b4845676041ce91f56f01f qtscript-f237e324508dcf0dbabde9dd498eda9fa61c4ff0.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5script/qt5script.mk b/package/qt5/qt5script/qt5script.mk > index 313895f11b..96cbbfbbad 100644 > --- a/package/qt5/qt5script/qt5script.mk > +++ b/package/qt5/qt5script/qt5script.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SCRIPT_VERSION = 5cec94b2c1503f106f4ef4778d016410ebb86211 > +QT5SCRIPT_VERSION = f237e324508dcf0dbabde9dd498eda9fa61c4ff0 > QT5SCRIPT_SITE = $(QT5_SITE)/qtscript/-/archive/$(QT5SCRIPT_VERSION) > QT5SCRIPT_SOURCE = qtscript-$(QT5SCRIPT_VERSION).tar.bz2 > QT5SCRIPT_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5scxml/qt5scxml.hash b/package/qt5/qt5scxml/qt5scxml.hash > index 1c11ae5853..f4d52b8a52 100644 > --- a/package/qt5/qt5scxml/qt5scxml.hash > +++ b/package/qt5/qt5scxml/qt5scxml.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 5fc3e6166ab3588242864c5d8f18235a45f5c3396482ccfeb8590fe67d0cd549 qtscxml-dcbd73cf3e8a07dbfa249d7db2257caafa83781b.tar.bz2 > +sha256 a0113f54d9df14ebae15dd85530f87f093a284372ee8237d1ccceb02e6a4607b qtscxml-631fd7bcc34802b7650c2b1dc73691463954d982.tar.bz2 > > # Hashes for license files: > sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT > diff --git a/package/qt5/qt5scxml/qt5scxml.mk b/package/qt5/qt5scxml/qt5scxml.mk > index af18b84e9d..f6ccb9298e 100644 > --- a/package/qt5/qt5scxml/qt5scxml.mk > +++ b/package/qt5/qt5scxml/qt5scxml.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SCXML_VERSION = dcbd73cf3e8a07dbfa249d7db2257caafa83781b > +QT5SCXML_VERSION = 631fd7bcc34802b7650c2b1dc73691463954d982 > QT5SCXML_SITE = $(QT5_SITE)/qtscxml/-/archive/$(QT5SCXML_VERSION) > QT5SCXML_SOURCE = qtscxml-$(QT5SCXML_VERSION).tar.bz2 > QT5SCXML_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5sensors/qt5sensors.hash b/package/qt5/qt5sensors/qt5sensors.hash > index 559f02e7f6..d43fa8ba65 100644 > --- a/package/qt5/qt5sensors/qt5sensors.hash > +++ b/package/qt5/qt5sensors/qt5sensors.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fa0ffba89fed2086d06dab84074cdd789acbfb89da6f64c40a64fc3bc067832e qtsensors-1ab8d6c7257f9ec060739b648704be1cf1c16b05.tar.bz2 > +sha256 8325826a259189fc7dea66651df4022a92a73664e953f86bce5bf5946ebacdf5 qtsensors-35eb5ac7eaef4745a38958c3ca780d7baa2e4f30.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5sensors/qt5sensors.mk b/package/qt5/qt5sensors/qt5sensors.mk > index 299fab3db0..40bb72e038 100644 > --- a/package/qt5/qt5sensors/qt5sensors.mk > +++ b/package/qt5/qt5sensors/qt5sensors.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SENSORS_VERSION = 1ab8d6c7257f9ec060739b648704be1cf1c16b05 > +QT5SENSORS_VERSION = 35eb5ac7eaef4745a38958c3ca780d7baa2e4f30 > QT5SENSORS_SITE = $(QT5_SITE)/qtsensors/-/archive/$(QT5SENSORS_VERSION) > QT5SENSORS_SOURCE = qtsensors-$(QT5SENSORS_VERSION).tar.bz2 > QT5SENSORS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5serialbus/qt5serialbus.hash b/package/qt5/qt5serialbus/qt5serialbus.hash > index b8f96cf0c0..01ffd7c215 100644 > --- a/package/qt5/qt5serialbus/qt5serialbus.hash > +++ b/package/qt5/qt5serialbus/qt5serialbus.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 caaccfdabdf502c3aacf9fa842ed31ed7682cab6ada69b06be1ba49273fb1f1c qtserialbus-e34053fbda8d687e3dc294fbd5e3a88bf94a7a66.tar.bz2 > +sha256 fe08415d2348797429dc09722478630ceee3d7477652a2712460e79127b7291b qtserialbus-f9f7eee60adac72fcf6617d164e3bf61222bb5c5.tar.bz2 > > # Hashes for license files: > sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 > diff --git a/package/qt5/qt5serialbus/qt5serialbus.mk b/package/qt5/qt5serialbus/qt5serialbus.mk > index 70f23ce407..c718414932 100644 > --- a/package/qt5/qt5serialbus/qt5serialbus.mk > +++ b/package/qt5/qt5serialbus/qt5serialbus.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SERIALBUS_VERSION = e34053fbda8d687e3dc294fbd5e3a88bf94a7a66 > +QT5SERIALBUS_VERSION = f9f7eee60adac72fcf6617d164e3bf61222bb5c5 > QT5SERIALBUS_SITE = $(QT5_SITE)/qtserialbus/-/archive/$(QT5SERIALBUS_VERSION) > QT5SERIALBUS_SOURCE = qtserialbus-$(QT5SERIALBUS_VERSION).tar.bz2 > QT5SERIALBUS_DEPENDENCIES = qt5serialport > diff --git a/package/qt5/qt5serialport/qt5serialport.hash b/package/qt5/qt5serialport/qt5serialport.hash > index d25b2193e7..58461430c7 100644 > --- a/package/qt5/qt5serialport/qt5serialport.hash > +++ b/package/qt5/qt5serialport/qt5serialport.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 83abb0c5b9c435a031abf1a36d6d44f8e3f5e2fc16150bdc78c6d33b25386bb6 qtserialport-191e67e428522a0e2e1e8d2f3440607a9760d441.tar.bz2 > +sha256 6d49d0da174632f51291b0190f6f1db2397a3b339cf293514252766f8a20c63b qtserialport-c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5serialport/qt5serialport.mk b/package/qt5/qt5serialport/qt5serialport.mk > index cd96df2007..7d00bd2ab7 100644 > --- a/package/qt5/qt5serialport/qt5serialport.mk > +++ b/package/qt5/qt5serialport/qt5serialport.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SERIALPORT_VERSION = 191e67e428522a0e2e1e8d2f3440607a9760d441 > +QT5SERIALPORT_VERSION = c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694 > QT5SERIALPORT_SITE = $(QT5_SITE)/qtserialport/-/archive/$(QT5SERIALPORT_VERSION) > QT5SERIALPORT_SOURCE = qtserialport-$(QT5SERIALPORT_VERSION).tar.bz2 > QT5SERIALPORT_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5svg/qt5svg.hash b/package/qt5/qt5svg/qt5svg.hash > index 424891ac2c..4816206d64 100644 > --- a/package/qt5/qt5svg/qt5svg.hash > +++ b/package/qt5/qt5svg/qt5svg.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 eeb4175f0b2c3299abf0ca9d751886612dad5ecd212c954f9801b28b4696f4f7 qtsvg-23b8cf7d833c335d7735855570c05e9e0893a9b7.tar.bz2 > +sha256 063ee53515b934c00a65838fe8521142e4a9161b07c8e19b5bb0ea26a0ce9ab3 qtsvg-a9752b00a03438de8e5b080073816e12409404b7.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5svg/qt5svg.mk b/package/qt5/qt5svg/qt5svg.mk > index 3072fd7a18..2a39ed18fe 100644 > --- a/package/qt5/qt5svg/qt5svg.mk > +++ b/package/qt5/qt5svg/qt5svg.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SVG_VERSION = 23b8cf7d833c335d7735855570c05e9e0893a9b7 > +QT5SVG_VERSION = a9752b00a03438de8e5b080073816e12409404b7 > QT5SVG_SITE = $(QT5_SITE)/qtsvg/-/archive/$(QT5SVG_VERSION) > QT5SVG_SOURCE = qtsvg-$(QT5SVG_VERSION).tar.bz2 > QT5SVG_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5tools/qt5tools.hash b/package/qt5/qt5tools/qt5tools.hash > index 58ed752b9b..d603598257 100644 > --- a/package/qt5/qt5tools/qt5tools.hash > +++ b/package/qt5/qt5tools/qt5tools.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 76052a183a41fcddfd4446ffba6a99c3e77a21453fe629cf67379ffa617a0d53 qttools-53ee43a51b5a3de2877dafffc78e71ff55926708.tar.bz2 > +sha256 b6eebbd61dcde981d63ce6de39b3c957bad8f11b0140585ba4d57d166c4dd79d qttools-32912a06aadfc3dcbc34e0a668ce2c78351eee6e.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5tools/qt5tools.mk b/package/qt5/qt5tools/qt5tools.mk > index e87c9b50a5..a01a336584 100644 > --- a/package/qt5/qt5tools/qt5tools.mk > +++ b/package/qt5/qt5tools/qt5tools.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5TOOLS_VERSION = 53ee43a51b5a3de2877dafffc78e71ff55926708 > +QT5TOOLS_VERSION = 32912a06aadfc3dcbc34e0a668ce2c78351eee6e > QT5TOOLS_SITE = $(QT5_SITE)/qttools/-/archive/$(QT5TOOLS_VERSION) > QT5TOOLS_SOURCE = qttools-$(QT5TOOLS_VERSION).tar.bz2 > > diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > index 1cdd8f0386..60d51fa5fe 100644 > --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 6ef14ba8bb5eb287320b6c0d6e61c5c2916a94ef754bb8a2d89c123043485d67 qtvirtualkeyboard-e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db.tar.bz2 > +sha256 e1e356e81f3a3fb5da6f6739aa475c15aab15090e202de6704441a3bf41c335b qtvirtualkeyboard-9fbb837b55887bec5d73fad142c853ef68db35b3.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > index c31d455c4e..067db80330 100644 > --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5VIRTUALKEYBOARD_VERSION = e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db > +QT5VIRTUALKEYBOARD_VERSION = 9fbb837b55887bec5d73fad142c853ef68db35b3 > QT5VIRTUALKEYBOARD_SITE = $(QT5_SITE)/qtvirtualkeyboard/-/archive/$(QT5VIRTUALKEYBOARD_VERSION) > QT5VIRTUALKEYBOARD_SOURCE = qtvirtualkeyboard-$(QT5VIRTUALKEYBOARD_VERSION).tar.bz2 > QT5VIRTUALKEYBOARD_DEPENDENCIES = qt5declarative qt5svg > diff --git a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch b/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > deleted file mode 100644 > index adad3768b2..0000000000 > --- a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > +++ /dev/null > @@ -1,35 +0,0 @@ > -From 05658e127dedfff65789860415537c6920ec574d Mon Sep 17 00:00:00 2001 > -From: Samuli Piippo > -Date: Thu, 22 Apr 2021 15:29:56 +0300 > -Subject: [PATCH] Add missing define guards > - > -Ammend cca1b94190a094b5d1d7ce492b6533e2d330c5e8 to use m_composeState > -only if xcbcommon is available. > - > -Pick-to: 5.15 > -Change-Id: I48332b15def3282c5bda3e1c7c393ea7e9849cbe > -Reviewed-by: Aleix Pol Gonzalez > -[Backported from: 05658e127dedfff65789860415537c6920ec574d] > -Signed-off-by: Quentin Schulz > ---- > - src/client/qwaylandinputcontext.cpp | 2 ++ > - 1 file changed, 2 insertions(+) > - > -diff --git a/src/client/qwaylandinputcontext.cpp b/src/client/qwaylandinputcontext.cpp > -index 16e03ea1..cbf63cde 100644 > ---- a/src/client/qwaylandinputcontext.cpp > -+++ b/src/client/qwaylandinputcontext.cpp > -@@ -408,8 +408,10 @@ bool QWaylandInputContext::isValid() const > - void QWaylandInputContext::reset() > - { > - qCDebug(qLcQpaInputMethods) << Q_FUNC_INFO; > -+#if QT_CONFIG(xkbcommon) > - if (m_composeState) > - xkb_compose_state_reset(m_composeState); > -+#endif > - > - QPlatformInputContext::reset(); > - > --- > -2.35.1 > - > diff --git a/package/qt5/qt5wayland/qt5wayland.hash b/package/qt5/qt5wayland/qt5wayland.hash > index 58935ceadc..c9d7f3434c 100644 > --- a/package/qt5/qt5wayland/qt5wayland.hash > +++ b/package/qt5/qt5wayland/qt5wayland.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 bfe9bce353c036356dc7bca04e634f03c7c924381062ce89627a88df0ae7484e qtwayland-36659e6130ed3fc2b3f0c91423408ef5ecb7b991.tar.bz2 > +sha256 c881745403a7c3639ee928f64ac9e7252d7a941cb62ef682a7ee83ccf3ae0a60 qtwayland-8faf74a7966b520f0ac3eb4d88235f8ec63b31b8.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5wayland/qt5wayland.mk b/package/qt5/qt5wayland/qt5wayland.mk > index 63fa1f21c0..aeca1b0381 100644 > --- a/package/qt5/qt5wayland/qt5wayland.mk > +++ b/package/qt5/qt5wayland/qt5wayland.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5WAYLAND_VERSION = 36659e6130ed3fc2b3f0c91423408ef5ecb7b991 > +QT5WAYLAND_VERSION = 8faf74a7966b520f0ac3eb4d88235f8ec63b31b8 > QT5WAYLAND_SITE = $(QT5_SITE)/qtwayland/-/archive/$(QT5WAYLAND_VERSION) > QT5WAYLAND_SOURCE = qtwayland-$(QT5WAYLAND_VERSION).tar.bz2 > QT5WAYLAND_DEPENDENCIES = wayland > diff --git a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > index dff3e6c849..aeec4c58b1 100644 > --- a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > +++ b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > @@ -28,24 +28,25 @@ linking statically by default. > [1] https://github.com/qt/qtwebengine-chromium/commit/cfab9198a9917f42cf08b1caf84ab9b71aac1911#diff-905c8f054808213577c0a92d1b704615 > > Signed-off-by: Romain Naour > +Signed-off-by: Giulio Benetti > +[Giulio: rebased to qt5.15.10] > --- > src/buildtools/gn.pro | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/src/buildtools/gn.pro b/src/buildtools/gn.pro > -index 033202e6..5dd8e241 100644 > +index f94694da0..19079a5b3 100644 > --- a/src/buildtools/gn.pro > +++ b/src/buildtools/gn.pro > @@ -20,7 +20,8 @@ build_pass|!debug_and_release { > - > + > gn_gen_args = --no-last-commit-position --out-path $$out_path \ > --cc \"$$which($$QMAKE_CC)\" --cxx \"$$which($$QMAKE_CXX)\" \ > - --ld \"$$which($$QMAKE_LINK)\" > + --ld \"$$which($$QMAKE_LINK)\" \ > + --no-static-libstdc++ > - > - msvc:!clang_cl: gn_gen_args += --use-lto > - > --- > -2.25.4 > + !isEmpty(QMAKE_AR): gn_gen_args += --ar \"$$which($$first(QMAKE_AR))\" > > + msvc:!clang_cl: gn_gen_args += --use-lto > +-- > +2.34.1 > diff --git a/package/qt5/qt5webengine/qt5webengine.hash b/package/qt5/qt5webengine/qt5webengine.hash > index 1d2b70c4f6..038446a9f4 100644 > --- a/package/qt5/qt5webengine/qt5webengine.hash > +++ b/package/qt5/qt5webengine/qt5webengine.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fb7abcf88d4336d55565627e18b33df1855fefb0f12e24931b6a7decbe60913b qtwebengine-v5.15.8-lts.tar.bz2 > +sha256 4a3456df42e1c1b859232b3ee1d58360e629d55daf6e5ad308871142c1b0c2fa qtwebengine-v5.15.10-lts.tar.bz2 > > # Locally calculated > sha256 f34787ef0342c614b667186a6ec2f5d6b9d650e30142a2788a589a89743e88e9 LICENSE.Chromium > diff --git a/package/qt5/qt5webview/qt5webview.mk b/package/qt5/qt5webview/qt5webview.mk > index 54da733e7b..a55fd8ae74 100644 > --- a/package/qt5/qt5webview/qt5webview.mk > +++ b/package/qt5/qt5webview/qt5webview.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5WEBVIEW_VERSION = 826d2a33929c69807917536d48b7861e7682001e > +QT5WEBVIEW_VERSION = 87577dde04ed219bda776dabca86176149736331 > QT5WEBVIEW_SITE = $(QT5_SITE)/qtwebview/-/archive/$(QT5WEBVIEW_VERSION) > QT5WEBVIEW_SOURCE = qtwebview-$(QT5WEBVIEW_VERSION).tar.bz2 > QT5WEBVIEW_DEPENDENCIES = qt5webengine > diff --git a/package/qt5/qt5x11extras/qt5x11extras.mk b/package/qt5/qt5x11extras/qt5x11extras.mk > index fb6650e84a..80c5498518 100644 > --- a/package/qt5/qt5x11extras/qt5x11extras.mk > +++ b/package/qt5/qt5x11extras/qt5x11extras.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5X11EXTRAS_VERSION = 51b0a5a2e3e35f4cb17da1e7cb4babef6294bfb4 > +QT5X11EXTRAS_VERSION = 982f20eb585d77e5b5c721e05a466d7161f7f2d1 > QT5X11EXTRAS_SITE = $(QT5_SITE)/qtx11extras/-/archive/$(QT5X11EXTRAS_VERSION) > QT5X11EXTRAS_SOURCE = qtx11extras-$(QT5X11EXTRAS_VERSION).tar.bz2 > QT5X11EXTRAS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > index a1dbb40154..353dfc8485 100644 > --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 6243e6334c0d1467e3e5bdecd981d7e673f4cc99cf2cee3b99597be4218a4bd2 qtxmlpatterns-dfcae10dec8c1c2c544ad0cd303cea113b0af51d.tar.bz2 > +sha256 067b801049f6fada8e7ebcfbce0530db6217a1a94b8ed34c99c530be4129889d qtxmlpatterns-30e6c84fe2752cde8b53aff9d38c2095cd7c8761.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > index 6711e9bf70..803c36cf04 100644 > --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5XMLPATTERNS_VERSION = dfcae10dec8c1c2c544ad0cd303cea113b0af51d > +QT5XMLPATTERNS_VERSION = 30e6c84fe2752cde8b53aff9d38c2095cd7c8761 > QT5XMLPATTERNS_SITE = $(QT5_SITE)/qtxmlpatterns/-/archive/$(QT5XMLPATTERNS_VERSION) > QT5XMLPATTERNS_SOURCE = qtxmlpatterns-$(QT5XMLPATTERNS_VERSION).tar.bz2 > QT5XMLPATTERNS_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Wed Oct 12 20:23:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:23:16 +0200 Subject: [Buildroot] [PATCH 1/2] package/lttng-modules: enable CONFIG_FTRACE in kernel configuration Message-ID: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> The build of lttng-modules will fail if the kernel does not have CONFIG_TRACEPOINTS enabled. However, CONFIG_TRACEPOINTS is a prompt-less option, and the most generic option that does enable CONFIG_TRACEPOINTS is CONFIG_FTRACE. In addition, CONFIG_FTRACE will also enable CONFIG_STACKTRACE, which is needed on CPU architectures that don't provide the STACKWALK mechanism in the kernel, as is the case on ARM 32-bit for example. Therefore, let's enable CONFIG_FTRACE when building lttng-modules. Cc: Cl?ment L?ger Reported-by: Cl?ment L?ger Signed-off-by: Thomas Petazzoni --- package/lttng-modules/lttng-modules.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/lttng-modules/lttng-modules.mk b/package/lttng-modules/lttng-modules.mk index d527bc19ef..97cda53f08 100644 --- a/package/lttng-modules/lttng-modules.mk +++ b/package/lttng-modules/lttng-modules.mk @@ -14,6 +14,7 @@ LTTNG_MODULES_MODULE_MAKE_OPTS = CONFIG_LTTNG=m CONFIG_LTTNG_CLOCK_PLUGIN_TEST=m define LTTNG_MODULES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) endef $(eval $(kernel-module)) -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 12 20:23:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:23:17 +0200 Subject: [Buildroot] [PATCH 2/2] package/lttng-modules: bump to 2.13.7 In-Reply-To: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> References: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> Message-ID: <20221012202317.2898868-2-thomas.petazzoni@bootlin.com> This is the latest point release in the stable 2.13 branch (currently the latest stable branch available). Cc: Cl?ment L?ger Reported-by: Cl?ment L?ger Signed-off-by: Thomas Petazzoni --- package/lttng-modules/lttng-modules.hash | 4 ++-- package/lttng-modules/lttng-modules.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lttng-modules/lttng-modules.hash b/package/lttng-modules/lttng-modules.hash index fb253c9bf6..e685cc3367 100644 --- a/package/lttng-modules/lttng-modules.hash +++ b/package/lttng-modules/lttng-modules.hash @@ -1,5 +1,5 @@ -# From https://lttng.org/files/lttng-modules/lttng-modules-2.13.1.tar.bz2.sha256 -sha256 a7c86d91c9bbe66d27f025aa04b8cfc6d7785ed2fc7ef774930800ee44d7f343 lttng-modules-2.13.1.tar.bz2 +# From https://lttng.org/files/lttng-modules/lttng-modules-2.13.7.tar.bz2.sha256 +sha256 5a99679df7903160cbde3918fee5af90ffafc90fc96ccdefaa57cf230492b234 lttng-modules-2.13.7.tar.bz2 # Hash for license files sha256 d72921266bc8452a8789f8a04a82755373990d00b7e0b0f1a8edb8f854e94d1c LICENSES/LGPL-2.1 diff --git a/package/lttng-modules/lttng-modules.mk b/package/lttng-modules/lttng-modules.mk index 97cda53f08..416833f4ef 100644 --- a/package/lttng-modules/lttng-modules.mk +++ b/package/lttng-modules/lttng-modules.mk @@ -4,7 +4,7 @@ # ################################################################################ -LTTNG_MODULES_VERSION = 2.13.1 +LTTNG_MODULES_VERSION = 2.13.7 LTTNG_MODULES_SITE = http://lttng.org/files/lttng-modules LTTNG_MODULES_SOURCE = lttng-modules-$(LTTNG_MODULES_VERSION).tar.bz2 LTTNG_MODULES_LICENSE = LGPL-2.1/GPL-2.0 (kernel modules), MIT (lib/bitfield.h, lib/prio_heap/*) -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 12 20:33:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:33:15 +0200 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221012175426.32367-1-neal.frager@amd.com> References: <20221012175426.32367-1-neal.frager@amd.com> Message-ID: <20221012223315.68f43720@windsurf> Hello, On Wed, 12 Oct 2022 11:54:26 -0600 Neal Frager via buildroot wrote: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > > It will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash. Details of the issue > can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch > enables a pmufw binary built by petalinux to solve the issue. > > Signed-off-by: Neal Frager I think the whole commit log is a bit confusing. What this commit allows is to use a PMU FW as an ELF binary in addition to allowing to use a PMU FW provided as a raw binary. And indeed, this will allow using the PMU FW provided by Petalinux in addition to the ones of zynqmp-pmufw-builder, which is the motivation for the change. > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) Spaces around = sign. > + > +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) > +UBOOT_ZYNQMP_PMUFW_CONVERT=y Ditto. > +endif > + > define UBOOT_ZYNQMP_KCONFIG_PMUFW > - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") > + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), > + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) You could also write this like this: $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) and get rid of UBOOT_ZYNQMP_PMUFW_CONVERT entirely. I was wondering if the usage of objcopy was correct or whether $(TARGET_OBJCOPY) would be more correct. But in fact none of them is perfect I guess: the PMU FW is a Microblaze ELF binary, while $(TARGET_OBJCOPY) will be an ARM64 objcopy, and plain objcopy will be the machine native objcopy, very unlikely to be a Microblaze one :-) So overall, I guess using objcopy is fine here. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 12 20:40:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:40:08 +0200 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod In-Reply-To: <87edvdeseo.wl-me@linux.beauty> References: <87edvdeseo.wl-me@linux.beauty> Message-ID: <20221012224008.5dc7c7b6@windsurf> Hello, On Wed, 12 Oct 2022 09:34:39 +0800 Li Chen wrote: > Content-Transfer-Encoding: 8bit > > kmod install path is always /usr/bin/kmod instead > of /bin/kmod. > > So if we link modprobe/lsmod/... to /bin/kmod > > We will get error like: > > # modprobe > > -sh: modprobe: not found > > because it points to: > > # ls -liah /sbin/modprobe > > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod > > and kmod is under /usr/bin/kmod instead of /bin/kmod. > > Signed-off-by: Li Chen Are you testing a BR2_ROOTFS_MERGED_USR enabled or a BR2_ROOTFS_MERGED_USR disabled configuration? If you're testing a BR2_ROOTFS_MERGED_USR enabled configuration, then the "modprobe" symlink, even if created in /sbin is in fact in /usr/sbin, because /sbin is a symlink to /usr/sbin. So actually the symlink is /usr/sbin/modprobe -> ../bin/kmod, which is correct as kmod is indeed in /usr/bin/kmod. If you're testing a BR2_ROOTFS_MERGED_USR disabled configuration, then the "modprobe" symlink is really in /sbin, and /sbin/modprobe is a symlink to ../usr/bin/kmod, which is correct. (Of course, I didn't do a test, so maybe my reasoning is wrong, but the current logic appears correct at first sight). Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From leo at yuriev.ru Wed Oct 12 20:42:46 2022 From: leo at yuriev.ru (=?UTF-8?q?=D0=9B=D0=B5=D0=BE=D0=BD=D0=B8=D0=B4=20=D0=AE=D1=80=D1=8C=D0=B5=D0=B2=20=28Leonid=20Yuriev=29?=) Date: Wed, 12 Oct 2022 23:42:46 +0300 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 Message-ID: <20221012204246.904703-1-leo@yuriev.ru> This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ?????? ????? (Leonid Yuriev) --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 12 21:50:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 23:50:08 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility Message-ID: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Y2038 is now almost only 15 years away, and embedded systems built today are potentially going to still be operational in 15 years, and even though they are supposed to receive updates by then, we all know how things go, and potentially some of these embedded systems will not receive any update. In 2038, the signed 32-bit representation of time_t used on 32-bit architectures will overflow, causing all time-related functions to go back in time in a surprising way. The Linux kernel has already been modified to support a 64-bit representation of time_t on 32-bit architectures, but from a C library perspective, the situation varies: - glibc uses this 64-bit time_t representation on 32-bit systems since glibc 2.34, but only if -D_TIME_BITS=64 is specified. Therefore, this commit adds an option to add this flag globally to the build, when glibc is the C library and the architecture is not 64-bit. - musl uses unconditionally a 64-bit time_t representation on 32-bit systems since musl 1.2.0. So there is nothing to do here since Buildroot has been using a musl >= 1.2.0, used since Buildroot 2020.05. No Buildroot option is needed here. - uClibc-ng does not support a 64-bit time_t representation on 32-bit systems, so systems using uClibc-ng will not be Y2038 compliant, at least for now. No Buildroot option is needed here. It should be noted that being Y2038-compliant will only work if all application/library code is correct. For example if an application/library stores a timestamp in an "int" instead of using the proper time_t type, then the mechanisms described above will not fix this, and the application/library will continue to be broken in terms of Y2038 support. Possible discussions points about this patch: - Should we have an option at all, or should we unconditionally pass -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 for quite some time. The reasoning for having an option is that the mechanism is itself opt-in in glibc, and generally relatively new, so it seemed logical for now to make it optional as well in Buildroot. - Should we show something (a Config.in comment?) in the musl and uClibc-ng case to let the user know that the code is Y2038 compliant (musl) or not Y2038 compliant (uClibc-ng). Or should this discussion be part of the Buildroot documentation? Signed-off-by: Thomas Petazzoni --- Config.in | 16 ++++++++++++++++ package/Makefile.in | 3 +++ 2 files changed, 19 insertions(+) diff --git a/Config.in b/Config.in index 3c57c591a8..46c80fe2f0 100644 --- a/Config.in +++ b/Config.in @@ -753,6 +753,22 @@ config BR2_PER_PACKAGE_DIRECTORIES endmenu +config BR2_TIME_BITS_64 + bool "Build Y2038-ready code" + depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64 + help + This option will pass -D_TIME_BITS=64 in the compiler flags + to ensure the glibc C library uses a 64-bit representation + for time_t and other time types, which ensures that + programs/libraries will correctly handle time past year + 2038. + + Notes: + - This option only has an effect with glibc >= 2.34. + - The musl C library since its version 1.20 is + unconditionally Y2038 compliant. + - The uClibc-ng library is not Y2038 compliant. + comment "Security Hardening Options" config BR2_PIC_PIE_ARCH_SUPPORTS diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..59d88bb97e 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -163,6 +163,9 @@ TARGET_HARDENED += -D_FORTIFY_SOURCE=2 endif TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 +ifeq ($(BR2_TIME_BITS_64),y) +TARGET_CPPFLAGS += -D_TIME_BITS=64 +endif TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED) TARGET_CXXFLAGS = $(TARGET_CFLAGS) TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) -- 2.37.3 From robert.hancock at calian.com Wed Oct 12 23:49:37 2022 From: robert.hancock at calian.com (Robert Hancock) Date: Wed, 12 Oct 2022 23:49:37 +0000 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Message-ID: <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> On Wed, 2022-10-12 at 23:50 +0200, Thomas Petazzoni via buildroot wrote: > Y2038 is now almost only 15 years away, and embedded systems built > today are potentially going to still be operational in 15 years, and > even though they are supposed to receive updates by then, we all know > how things go, and potentially some of these embedded systems will > not > receive any update. > > In 2038, the signed 32-bit representation of time_t used on 32-bit > architectures will overflow, causing all time-related functions to go > back in time in a surprising way. > > The Linux kernel has already been modified to support a 64-bit > representation of time_t on 32-bit architectures, but from a C > library > perspective, the situation varies: > > ?- glibc uses this 64-bit time_t representation on 32-bit systems > ?? since glibc 2.34, but only if -D_TIME_BITS=64 is > ?? specified. Therefore, this commit adds an option to add this flag > ?? globally to the build, when glibc is the C library and the > ?? architecture is not 64-bit. > > ?- musl uses unconditionally a 64-bit time_t representation on 32-bit > ?? systems since musl 1.2.0. So there is nothing to do here since > ?? Buildroot has been using a musl >= 1.2.0, used since Buildroot > ?? 2020.05. No Buildroot option is needed here. > > ?- uClibc-ng does not support a 64-bit time_t representation on 32- > bit > ?? systems, so systems using uClibc-ng will not be Y2038 compliant, > at > ?? least for now. No Buildroot option is needed here. > > It should be noted that being Y2038-compliant will only work if all > application/library code is correct. For example if an > application/library stores a timestamp in an "int" instead of using > the proper time_t type, then the mechanisms described above will not > fix this, and the application/library will continue to be broken in > terms of Y2038 support. > > Possible discussions points about this patch: > > ?- Should we have an option at all, or should we unconditionally pass > ?? -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 > ?? for quite some time. The reasoning for having an option is that > ?? the mechanism is itself opt-in in glibc, and generally relatively > ?? new, so it seemed logical for now to make it optional as well in > ?? Buildroot. There's some chance of software being broken by enabling this, with either a compile or runtime failure. For example, applications that assume sizeof(time_t) == sizeof(long) would work on 32-bit platforms with a 32-bit time and 64-bit platforms with a 64-bit time, but fail with a 64-bit time on 32-bit. I believe I've seen this when trying to build software with that option, so turning this on unconditionally might be unwise, unless some build tests of the supported packages have been done.. > > ?- Should we show something (a Config.in comment?) in the musl and > ?? uClibc-ng case to let the user know that the code is Y2038 > ?? compliant (musl) or not Y2038 compliant (uClibc-ng). Or should > this > ?? discussion be part of the Buildroot documentation? > > Signed-off-by: Thomas Petazzoni > --- > ?Config.in?????????? | 16 ++++++++++++++++ > ?package/Makefile.in |? 3 +++ > ?2 files changed, 19 insertions(+) > > diff --git a/Config.in b/Config.in > index 3c57c591a8..46c80fe2f0 100644 > --- a/Config.in > +++ b/Config.in > @@ -753,6 +753,22 @@ config BR2_PER_PACKAGE_DIRECTORIES > ? > ?endmenu > ? > +config BR2_TIME_BITS_64 > +???????bool "Build Y2038-ready code" > +???????depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64 > +???????help > +???????? This option will pass -D_TIME_BITS=64 in the compiler flags > +???????? to ensure the glibc C library uses a 64-bit representation > +???????? for time_t and other time types, which ensures that > +???????? programs/libraries will correctly handle time past year > +???????? 2038. > + > +???????? Notes: > +?????????? - This option only has an effect with glibc >= 2.34. > +?????????? - The musl C library since its version 1.20 is > +???????????? unconditionally Y2038 compliant. > +?????????? - The uClibc-ng library is not Y2038 compliant. > + > ?comment "Security Hardening Options" > ? > ?config BR2_PIC_PIE_ARCH_SUPPORTS > diff --git a/package/Makefile.in b/package/Makefile.in > index 43d214bcbe..59d88bb97e 100644 > --- a/package/Makefile.in > +++ b/package/Makefile.in > @@ -163,6 +163,9 @@ TARGET_HARDENED += -D_FORTIFY_SOURCE=2 > ?endif > ? > ?TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE - > D_FILE_OFFSET_BITS=64 > +ifeq ($(BR2_TIME_BITS_64),y) > +TARGET_CPPFLAGS += -D_TIME_BITS=64 > +endif > ?TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) > $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED) > ?TARGET_CXXFLAGS = $(TARGET_CFLAGS) > ?TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) > $(TARGET_DEBUGGING) -- Robert Hancock Senior Hardware Designer, Calian Advanced Technologies www.calian.com From damien.lemoal at opensource.wdc.com Thu Oct 13 04:16:16 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 13:16:16 +0900 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y -- 2.37.3 From thomas.petazzoni at bootlin.com Thu Oct 13 05:43:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 05:43:20 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-12 Message-ID: <20221013054327.8FBA140C3D@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-12 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 2 | 0 | 6 | 2022.08.x | 21 | 15 | 0 | 36 | master | 92 | 812 | 7 | 911 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 351 ca-certificates-20211016 | 36 host-gcc-initial-11.3.0 | 29 berkeleydb-5.3.28 | 26 bearssl-0.6 | 23 crun-1.5 | 19 host-f2fs-tools-1.15.0 | 19 host-binutils-2.38 | 15 slang-2.3.2 | 13 libnss-3.83 | 10 libglib2-2.72.3 | 9 autofs-5.1.8 | 8 coremark-pro-1.1.2743 | 8 host-gcc-final-11.3.0 | 8 brltty | 7 host-sentry-cli-1.59.0 | 7 sdl-1.2.15 | 7 dieharder-3.31.1 | 6 fbset-2.1 | 6 host-rust-1.64.0 | 6 sysvinit-2.99 | 6 efivar-38 | 5 gerbera-1.10.0 | 5 host-gcc-initial-12.2.0 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 5 linux-6.0 | 5 systemd-250.4 | 5 btrfs-progs-5.16.2 | 4 duma-2.5.15 | 4 host-gauche-0.9.12 | 4 libee-0.4.1 | 4 linux-5.10.145-cip17-rt7 | 4 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 flite-2.2 | 3 frotz-2.54 | 3 gensio-2.5.5 | 3 host-berkeleydb-5.3.28 | 3 host-binutils-2.37 | 3 host-gcc-initial-10.4.0 | 3 host-riscv-isa-sim-1.1.0 | 3 igd2-for-linux-2.1 | 3 libarchive-3.6.1 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musepack-r475 | 3 perl-5.34.1 | 3 bat-0.19.0 | 2 dahdi-linux-5c840cf43838e06... | 2 exempi-2.6.1 | 2 f2fs-tools-1.15.0 | 2 fontconfig-2.13.1 | 2 gpm-1.20.7 | 2 hdparm-9.63 | 2 host-binutils-2.39 | 2 host-gcc-final-12.2.0 | 2 host-gdb-arc-2020.09-releas... | 2 host-protobuf-c-1.4.1 | 2 lcdproc-0.5.9 | 2 libcap-ng-0.8.3 | 2 libcurl-7.84.0 | 2 netsurf-3.10 | 2 openpgm-5-3-128 | 2 toolchain-external-codescap... | 2 tstools-08f6be304040e7b8476... | 2 uclibc-1.0.42 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 ace-7.0.6 | 1 alsa-lib-1.2.7.2 | 1 assimp-5.2.5 | 1 asterisk-16.25.2 | 1 boost-1.80.0 | 1 brltty-6.5 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 dash-0.5.11.5 | 1 dhcp-4.4.3 | 1 edk2-edk2-stable202102 | 1 freeradius-server-3.2.0 | 1 freeswitch-1.10.7 | 1 frr-8.3.1 | 1 gauche-0.9.12 | 1 gdal-3.5.1 | 1 gitlab-runner-14.5.1 | 1 gmp-6.2.1 | 1 gmrender-resurrect-0.0.9 | 1 gobject-introspection-1.72.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-vde2-2.3.2 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libqb-2.0.6 | 1 libsodium-1.0.18 | 1 lighttpd-1.4.67 | 1 lttng-modules-2.13.1 | 1 lxc-4.0.12 | 1 make: *** Waiting for unfin... | 1 mariadb-10.3.36 | 1 mimic-1.1.0 | 1 mongodb-4.2.18 | 1 musl-1.2.3 | 1 ncurses-6.1 | 1 openssh-9.0p1 | 1 openswan-3.0.0 | 1 openvmtools-11.3.5-18557794 | 1 package/qt6/qt6base/qt6base... | 1 pcsc-lite-1.9.8 | 1 perl-net-ssleay-1.85 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 poppler-21.12.0 | 1 python-pycryptodomex-3.15.0 | 1 qt6base-6.4.0 | 1 refpolicy-2.20220106 | 1 sconeserver-8d1935919a20133... | 1 toolchain-external-codescap... | 1 trace-cmd-2.9.7 | 1 traceroute-2.1.0 | 1 uccp420wlan-6.9.1 | 1 ulog-0389d243352255f6182326... | 1 valgrind-3.19.0 | 1 vde2-2.3.2 | 1 whois-5.5.13 | 1 wolfssl-5.5.1 | 1 xxhash-0.8.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b9a1754350d6a738926dfaeb862beb93e53f6662 | powerpc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f83d2788d4bb451b457e59cf9f26d6c24b3b4433 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/8e4090aaf1073a0766606f81c640cb2ac2b09948 | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/0cd387ddf55758990205aa9fea8b20a863a4687a | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1295f55793ae44741470872e198e6e93b630f287 | microblazeel | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/2e2b956867490b5c038bf605173c753c0158cc14 | aarch64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4d8b76708edb914c12907d8b54c953460635671d | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/8527f91a437981f9ed49060a0f6f2ae20cde533e | ORPH aarch64 | asterisk-16.25.2 | NOK | http://autobuild.buildroot.net/results/e577f3d8290a1d621ee554b04826cb37e7b3251f | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f0f2eceafbf2f443f04c3c4d47bc2aa5493f2d4a | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e4ec9277f523b3985ae5c6f70555a8636d9ddc38 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/87291d9281a1325367b35429607369807c93c264 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/55317448ce7118165857a0ee313cb1ba3660f14d | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6e782eb963e25f0d20900c515d1664bfe856c9a7 | or1k | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7eab6dc45363aa082bb8e0b39bbb7daa7b131158 | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3ad63f86158f5f843ed77c7ef685c438fdcdb7d3 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2b950f446a02f7099f5dfa73a6fa3a39f2b7a936 | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/ba64511dc3593e2004b87d3ca079486c3bd5ff4e | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/a1a35c4de40372af536102b3aa6b8b1ddd5c7920 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7e2b0f354b980cc3444a37f50540966ff1bf70db | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ec12e9a0df4fba650269c2fd6a6c631a871b6830 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/80a2e29f7e411fda47a43ab50e3b33b60c9a7743 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a01a89c438373a1d2fd5da6d92d2ce9ef1cd551c | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f3283bf971f6c48ec40f31b37822090dcf222cfd | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/daaaeacfc56a48b1acd8f0b76bf890ccd58190ce | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3618fc4d77f23b42d38113a5b6664ee0a96ac6da | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8b079261f7e9aa5f9b80fab17cabbad0fceed0d5 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8aff1a14ed7549bca53341001b9355b5aeae2cff | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/36f1189a75145e51ad26aa2b0d93f5ae28dc5b46 | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2516faf3417b1a529d5a5fb11b96e0b6d14c34a2 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c1f0d7eeb746900e405f2ce5d57863fbec214567 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2f2eb2ae63d99b19a250cbd695be845a9af91c1 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/20d3ddf8a6d04a5b6d2ae1d54525bedaa0ad56e3 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/45b58059fc3252ba4d22977c9eeaccd6dbf3eeba | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2786e933828485542750b77ae1277c1d5e36a51d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/cc798773bbb93dd3f857e197e8c336056621638b | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3568faffc603427bddbef71625a7037257878edf | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a35712d16b59b9eba8787b851a9092938e21d780 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e07d9cd42f151405899ffe3b88f06b9f3ec5377c | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2dbf0bedc1c68c24957c41834214f875389b8f5 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e5d97fb61d7137b4f138820126c878928e89ab3f | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bd2e7e6f65bf42138ec60e29f2a2479b67b7c267 | mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6078922654675d401d986e565de6ac42938de0e9 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d099fb78365ae848d2deea4d391be7d094902624 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3e8f431ac6946169916e5934071857c434687851 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fc6b9c0113a103eaae664516abdee8bc81c54706 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d307eb51035e4b2e4d7dffb6407120f3c68db58c | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/71c276f41f88eadbc0a0936a8c76bf01a6e51930 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d715da011e743d4b05eee28187c430a849106169 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/42c36bcf5fca2adfcaa48defd540470969786dd4 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d6ca22e78ef43a1ef96de19927258eb8b18eb787 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/319fe08256cd8623330b3bb6db918dc89dfb47b0 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cc4722a8d745b495a0d2609df92fc9a36e9b6534 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/39c08b37c1c7c54a776917df9007dedaf2b82248 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/efaeafb26cd86a4eab4c0af7583e6afdadbba311 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e5ca0812314f95518d7cc75636e2b16166b26f30 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6b3158f72dbe9e4c2f632c6687d7bd033b08ab6 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bedc1b7bf74f26b24018f3bc2dfaa3a850f9c50e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f9e62a40777b9bb1e38c9ba1e00903106106284b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/66fca6008604fa2ecff75ff955ae91b51efe0382 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6330e0e05ec987aed3f1d27414e819914d5556f | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3c49afcf04a2f07963b59c525628138afb147fc4 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e646f50b6a23692754508f0d4b1d82c397857b84 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/709e60cb973c42bd6da5df956fdcab6cc01b54c7 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6b8ee347ba537af3029bd04c590f62d90722cb81 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3dc67e4cf54e1f76c23dd6adcf09ec36da1ee760 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8c1b557f99720f95619f5fb45c982b2df73239de | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0941e976ab9ca8bd8d811f1ad8b252567e92bed7 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/77cba08e807c7d66882af23afddf19ce87b9025a | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/44f5f216f8428c0d346941fc751214fe2d9bbae6 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/2064a3987ecae989849e3bbc0f1fd8d9d4d598a4 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/3ecc7bb3ecdd2e65d62a14a2196d078262336de1 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/a1e89c6522f91b1abc761f085f3a2bbddbd660cf | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/6783fe6c9ba9ba23962b2d955419d8592a3297b3 | arm | brltty | TIM | http://autobuild.buildroot.net/results/b5671c1017a93fb2334d9e0564730af11408033d | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/c6c399629d690b3e4401d4a498591be1082bc892 | mipsel | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/07dc6309ae292ccff07f44b1013cd6af95582234 | sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a2ace987fc1440f67085f728e4923410e7dab968 | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ef85f9e4fcb4739e7b829c3d3d1dcc2cbbaccf4b | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/23eaeafb50c7bb36c48dc4dcefb6b539e9af1de6 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c85d8324d7ccdc98444c304a68aab5fc741aa742 | ORPH xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a0b552d30dd69d42e5518e34546c2e78fbd405a1 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/89b3b8d9610cd7f466ff0448eea2f3ea81bd1384 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e20228aed185021581e3b989ce21912e9d437543 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c2eeffa3ecb59a5d73e58462aa11d68842111867 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/74b507c0f29dfb48d565fb76fe23749ec3dc7fff | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/88dcb9eb12d291642964a71665cf6c05ae0dd1df | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae48771dfef08dc6b5d401e1a9bf3417cf003cad | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c2e1faeb33ef0f18937994b543f0eb3e1d663dad | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aaef99c2d4108f00b1a4181ad07bb64a46a6e3e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b7e7b4e619585c75b87468f5371e31c45eea971 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8f54c27c0c843711b0150626ff0b79637b261856 | sh4 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ba0d06fb0a2fef3c1621fc66222dc377604975f9 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9f2a1afe6e00cb9fb5c3f869bdf4e9e50e1231a | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9bb756d31e24800e991f8dd53adf8f8909f991aa | sh4 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bd347a234e11797e5f1df8af979f92c5025a653f | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9e6ff5dd2ccd510254af3ba2a91e0a74880e1c60 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d6a908a6bca10b370b5c33ea871070efd36647db | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6341cf285b385a0490855e8612ee9ecb33942f5f | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/73ae9841ecf3a33928dc41d9feb25746017907b4 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22c4468fb03ef59766a3e44e4920f848de210a35 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e157391c57510bd3220492032ce88e86789a5712 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/10baf76634e0d7cded6e34b5947eeac05c66c8bd | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a222fd4dd4cc7e17fb0642098ebc48838d1557f3 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61930569f380d53635d7bfc9baa530372e0c9677 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c895c7d64d5209de48c3bb594ecb19070a8fab46 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3ad1d25aa1a4bf61da24426cd3a2b98c2f3a5be1 | i586 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/91900dad1f91b856ff1ed6864008c5ffe99c9c70 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ca9702467a51ae4c1791071fe2447b8d4655766f | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8976671e382866e956732a1322cfb912dde26f70 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d8473e4cfdacebc05f446040a174c834eeefc992 | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b2412604c7eb2115bf75ad35217fdbac504e22ad | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b45eb0c20f0b4f8a815b0034cb7a18c92635c4a2 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3feac65a2eaf46c628b75384ea35b568b1d43ea2 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0453bcbb055a8c026d958847c206ac6b0a755c20 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61e3023abbb708ebd8b69e60110fc5874fa333ae | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5236cd24b3776330853a132653aa95899ad1a737 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4e46ece0df42dd981d7590ebcf516964536c31e7 | sh4aeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1c61a91993bab4cd4e5fb8d59d9d82d1c785ffa9 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/73113d96aa53cfc36ff34233dd46f5a2f0feb195 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b237e1ef3fb41cb6bb4844a95d72f4ddc3353a94 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6dbcb307674984dc15d295cceac1c9fb37c5945e | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/73dc27aa1ec7d2b7abf270f98ef1b852b83275fd | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b265933d99ec48fc5d7246998c8cbbde335a63a | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2797efa8dbf2faa27b0ac53399cd5703dd9cfc85 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3646e95ae46fb71608353f8512f212195a245e2f | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3d76c0e067a78b04cbea8ca26097ad2db4297e4 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/21e762b2490bc143118bd8d6d7c417b714d2d9b6 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f1cc917cec3cf4102d89ea954abc56ddfdc4f593 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4fd5d2cdbd376d27fd2202a864e28c327f0b2920 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8a8a3e6bcd469c2e9b0f6747dcd5878df22f1177 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/19b972adaa3f49a957c04baa221be204c34efaf5 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/03eaf053e26d096d8a89998efe497ab17d486ca0 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/327faa77b787bb677b62cfe01040b4311b4190e7 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/36e8793f49ed6a028204635c4e62b0ab05d30396 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a3f196f0e0adff3d5bf9214f44f4e63b87b0aff | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9cfd7f6221fa8d2a8e1438b34341cccff7ac45cb | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/889776fdde4535f3c4fdef63b199ea4b6684df29 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0921a7fc5db266b90c8831bcb9d87cb111d03c7c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/799c2913497eb1266aaa2edab2e6751b6cc77be3 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9493aefda7edffbc94ab5c9f7e1b4058ce1d5753 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/970bf45ed705cef33570021c37d003a54b423dc4 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fbf3ed135e3231f09807b30133298f93a0a164ed | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a01da0f669599f22c0b6ee8f0c438de471550e9b | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/16c74337703fc08fd2a8c34e13acf96eab9ba7f2 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3e4d5adb4fba997cc5d5a1770ffe9c2107e24db2 | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/50067d9c5a2ccfa41d716ad97915081e9b77fbaa | m68k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8ce2099dc051418693af1446d0de2315bda1a545 | ORPH sh4 | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/094e11a1052f02c889c7f1bc700efec5ff4cc7a9 | ORPH arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/6f57fc5c99c02559af7ab807fbddb4356038cf14 | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e86d11aaec2cf1292c7876aee666843e80a9f3ef | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/eb8a0dc5ea835e668ff9011f2a3f3e651691ce7e | arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/df9fd443de77c61181d7789c7d1cb38d1d66240d | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0b19a1e6e55fcd6fc3be3ec7e2b910aff01429b3 | mips64el | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/bb294762171a1bfeff26e5f0486532eeaedd5d33 | microblaze | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/e0e5544bf7955c63545d929e3016af3f79d1e095 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/f8ff4bc5c543ee8de4bcd31080b3ec2dc981c462 | ORPH powerpc64le | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/2f73a51517fbed1019c1f11b486f042c195fb4d0 | ORPH m68k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/c5bf69fca64456f731dd62f84b5b609c16583730 | ORPH sh4 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/bf6317e53f70477c36c1148c781fcd228123f1e0 | ORPH or1k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/2dace93c1c61901f2caa9a9995f766f62c4f6e52 | ORPH aarch64 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/050773e3be4dd6ca66599bb1bf870966588a7951 | ORPH aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/91fddff5c670f262e2aee8814d5ae8e53cce2a1b | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/e7945222a2ef5e631417eba879e0036b45d6f821 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/379a9245699fb37e216557b2051fe3d8ddffe7a6 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/803fc58b7cfe69423c4bc5eaf4bff93cae9a1100 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/d7c1a3785d1b867b87e7cb6938c7a8b3b1ce4fda | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/263bf66b68f5f56b7dccec86074ec12bdb8f516d | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8545de71d30d338988739fa1bc39649c2befe9fa | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fc4382b7dcc8cd3b4a32ebccb9ab78539e3517b0 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/dcfdc79eab9e39405aa224498432e87e2340e594 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/ba2e5bb7106cd453cb5108f643fca909f8c7cd01 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/97ce169d33bc90befeebb5b6b29921c44d923d55 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/efaf0b70a101a7ed1af1dc13bb0a474e93ab9271 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2f66cfab4ac40c0e9822be1cbce230586e3c634a | arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b5e2a7318aa868b0a5e19b987c16bf93285fb377 | ORPH sh4eb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/6b165317069397a50d87b77afcd974775027de2e | ORPH m68k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/977448db4133b23c3ffd6b19a4c84f609242f332 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/28ded714119f94452f0ac33365a936baca77a5c1 | ORPH mipsel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/ffcacc171505c639e24692c39b383564b6f5d027 | ORPH arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/05084b3a50f91af4f0b4da92bba767f500aba315 | ORPH powerpc | flite-2.2 | NOK | http://autobuild.buildroot.net/results/89fe02f2c3c741dcb686fb91cf59a09bafb5d5ab | mips64el | flite-2.2 | NOK | http://autobuild.buildroot.net/results/103d2b8dc9a39895fbff6038533565aa002ae4f8 | powerpc64 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/14829c9002520eec33470bde6354637684f3a856 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/fd35e01d92cc0d69616ff5fb4285fd2b3b73148b | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/1eedffb8123623d68dabe775c8f704226d2151ca | ORPH armeb | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/6c20d612923f2279b03144cba9f6c7284aff8d73 | arm | freeswitch-1.10.7 | NOK | http://autobuild.buildroot.net/results/db9a070067c39539bb1ca7e8bba95e7243df6fd5 | arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6c6008596a24fd604336a9adcf57203d32f8bf8f | riscv64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/870382aaa79664e68d4bb28d286dd703e0cd6087 | arc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/363fd33d567c62a0a4f31993837005e66771c26c | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/17728056188e5b0aa899af1e454859f40ebd0cf4 | x86_64 | gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/cbc0fa0a6e0cf3e14c5850d952be8c9e02135010 | sh4 | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/b56ee248b203ca44ca9632848e36506214e98ddc | arm | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/93d3758557338c76f1d86b4736b75e1310f56119 | mipsel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/7e426fa020058eee87374acf9be4439ccc8527eb | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/988f7369716e97f842009872bf423709cec1fb9b | armeb | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/51105936c2e6eed5b347340e897f99d98cfe829b | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/75b54919436655a6f68c0aceb4748b5438b5bcf2 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dc74cc78ae70ae2c71bf3d6f9bb98352c6a0400a | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/21f288af128fd84338647124a8b821412dcdee92 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c92282948c88cc1181797f61f5805f57e716929b | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/b7154799443e478a01224acbf37393adaf5eee3d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92967e637918011c10a933083c4655f17919b750 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/606be58195ded7814eecf1e6bba2cdd6d6829333 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7db3e8cc4b3dd3da7b55a949584fa09ff2f7d05 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/382981fab3beed73ea9c01ac1982b6d03e5e5372 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f79e913994f3160ca40a484d49a32ed6037cf1aa | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cda702b917f862d0c2aefcb5922173917695950e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ed0ce746c403635aa6040f78ba75a85131db1ee | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/381fc2a51b08c6ac567e962ab69f3c8a57750e0e | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0c616900a840a41180651384872c8a46289c4f8 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e943ebad75c2df1ef3179adbcf3e41b57b5c347 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/924c34433751edf23a8504f7e4638fe86f8c8673 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3f798a02207c7d7977704cb2a479ee670b5fc91 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62691b056997eccfb7a04508a9b4d476590c640e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5b7450d5ede291e6911f0e48da4eddf436fa322 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dce8ce6758b275e6cef63e0227e8c7400dc6a54f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0fe88e4e9ab10ec4422e2b3926d5eba3884e7fd6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9961df5f640dcedb6ac5f4f2354b907fa7a44580 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec26e7d2ac55a1aa372adf59cf31f4a65efd71ee | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/001c41746ef525ec3cac8f3e4df55123c0a6f35e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07cec08db6305e5255ecbee7ef8bf6b0a8be2c05 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82434e27796eda91a2f0a2b8dc16b704ace14272 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f30becc5316c26616fa650280c8a2c1beec881c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e326189bebaca6610c2b648067c7dd2787daf622 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c2cb5d86d640729aaf8b227c26a93e9f61430a2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db5a4f6891022253d1047b1ce61a92580f79281c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d4f7bbdb3fa369e713356a6b7ce273b0015c3c0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de2b0d161ed73ad4b3962a370b590c6c50c2599e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/822a2d9c383e30db9c6b2d71c50a72d0fdf73a05 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36e5c59002da51428244e5f8b4fb4dfc72a2645f | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9510956aa19a5d131761794a841389da14a301d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7475f1e7a6e1355391c6c1d36bb51f2ebcb0e7b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a352ea3441846d9ea0649eaa3ba0628f6de7567 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f1c468053584ce02aa6eef75f26680ad607143e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/655c68d779dfb0ed7931a8dc35d94b06fe5acfcd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4971cdc3f99a3ccaca12a80e64c95d4eb3922cb6 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c5f90646969d64746d943c1cf6b1ebb6480cbee | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fdbab65f356a40a76bfc3dfc62ad02ee53cd0eed | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b85421272f391f893dc3c06c4c93e76bda4e0421 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34288057bfc286ac064945c0b5205947e2163f7d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b01e170b4a1dba558c31cd86b3257a23d760d7d0 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68e49cf24a839c2ad171b3835c114f35d4fb1ddf | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee21157b2a6c44c0171d68dbfc49974e7a763a11 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c318e70f7750f0428f99628282b445c6f3b1a3d4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d20b16242a0e2de2bf34459a7935e7954b57574 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3acf5b22339b08286308fa19fbc201a092c6cc2a | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee4eb46b83b52ac6065a138dd993db672b21d157 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0064a6c7086840a791770162844a0e3d280cf2d8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38fdf2a94ee908868b04838c30dab88e9eded44f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f16a7b71d5758152cecd5fa807626cf1e969c718 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/251f1af05c3c443f958091b5adf8cdb89926fbc9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e772ecb56c2715efb930e486ce436eca7af3d6d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2663af8cab8bb3164f097bcd90b9c1ee937c1481 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95d9a3ffac098623ee8cbacd72d99e7e246a0b49 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26cc3bed992aeaa48fe80ba596bd9d6a7c7cd227 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2196072f28a9b782ec0fa98ab7b6cdbdfb32d6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7f78f1cab3934196a391d0fa420b68a6781252f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2aef2de5bf964e4c9793bd49ed2aa6848460572c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9fcf93a51aa21937a80054ff9db700fe7e4a991 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d7e557a5b12fa20530d9f4a9c8ad27dd2a3604d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d551ed63949822976a314015f71f768c9725d3a3 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a446b26b3401b5ac71c08227b7c7ca3fdcd3109 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0049bb80bf0d523b29d9a72c8c17583fd1e05f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/314cc85c21076978cf16a316f6ae00bc3a357f76 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec25318f08631206f66f0e6abcdd519474fbaa17 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0d33f44ad861b980a204a85caf4de78e54f0dfa | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d51a36f01b7d80d6ed508b49d14df63ec4935cf | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14892dae2574e326640af8c63773f2c29fb17d09 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a7006fef918d65861427b119009d2024961d6e7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97752c23b5f8d313449def06f81b64c861cfc5e8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33496ff19b606f939f1a8069b73083c935b59b85 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/501e8b005b079b0e97a9e4aa7efe83313308cb33 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2d91a6a0913715ff250ddbb3ea946fed3189243 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7d1b1a39d2fe117f541d04b6261473ec3b97532 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0fbb140d5fcb56be867a54a8ca6b01ff20ac886 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cbb215fb5e9846be0060d344153f5c1600fcdc2 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e1b94fd989209ca48eb5dcad9b852e5093f0d7f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c700f33a758e41c63440ceb2065929b2ca71bd57 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74c6a7a8eb68b6b0bff5ab53e72ef563d3238e48 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f0d6d4471680690002141716619d73cdae13b36 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a482315402d9740004918258e3379b30b485aa1d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ea485e74229e630ee2269416e78081d3e752734 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7e681218f87d24e95055d895f6d6bd2042fa7c0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90e2d0f534b684aaa91215349ac874fbcbb8fc5c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05caa742c8d57e3a21be90a6e01956b3ccb2a465 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed01b04676c1be5074ddec7d064ec12f5f0ba4f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e3bf149abee1a5a0b57add75be7c6a4995e8956 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0030b07006449236b2c9a645d9b7077da8d2e022 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c787df861fe10a48cd5ff68dc6eb069d3ccae2b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8a45b83766b90d68dbc8b69ca30631dc353cae2 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e89fe98d1aa9ab7d5dc26edf3b00123e3cc7756 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc1ffa9f0f44130884ab5b770e8dffcfec5cd0e3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f83ce6ffee96358d238ed11dab0752dfdac13e7f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad25646606b4ce93d829d537f72232e9c02a7b9a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7bc623920bc9789d6d837e1e0010e7eaaab586ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dd9fb4e422102c492ec46088eb731f183673d2a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de46c5803d285d3469cd5b5255bc8157d863f85f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43a619831b7201378f7cd24368dd8b8235a8878a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15e453ea21dd38fce0899382c6a42ffc0e6c4194 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/84090c7b58a76a60862adfb6a1c216e377133d15 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6abee43483e295b55ac3bac5a384cd76dbbbdac8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1aff306cc70621ed9ce50f34faa8117ee0613f80 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ef6c53bfbaca309b2ea49bdb25ffe02a2914a68 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0efbbf183c933d6d145496cd123a05045c8af32b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4c6594b36e626c7372546faf3ae13a0a6862871 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7bb306fcef31aaf0ebd0b9bbf7ba9b1a9b972518 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8afdfa22027487de475276f07acb39b8443f15 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2e8adefe245c311593494ec08dc063b0cc935ab | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fef4bc18ec68c813972b4cc0d61a7a56dbab4fdd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/213f601a5dba8d63fdf6b93a0201dfb8e4b744dd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18ef9c53f84261caa6896bdbb921551f7aea1450 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62220612c279ba4e3293f476bdac7a59f79e4582 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7dfddd4d069a3b759bd6f9ea7da4287387f9bc90 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a05613802f2b03409c08445ce543c107e56642d | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6babaa1e7704c6da9aa43a3e4d02e64d66f3e9d2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/559687da2510ce21ac5d08975ee9145fa92ed938 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c6d995895d87832a8a7ca01db61206f780b2dbf | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29540f58c3900d8ff80490cc608c2cb8901faee3 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86c9d806828ee444aedf6b5cf8ea5e6fe3b7caa | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0780f2fefe951e2841a09d2bf717fe77efdbf1d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9530afa328b67dca2a9653fad620e27b693adb7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6770a4320d91fe840e879eafcfde5cbf26eff4f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80b60b15fda956dc352429d817ea288abd0c0a6b | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/330522bfc31b3acb2be5264c83b640e9bd002722 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59822375fbcdef644dce5098deaaa37b570badf7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54232650831e86b69d1d8605babbebb880a14710 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed0f9fce859a3c5a3b8e476c2f2a4b1599c0cb0a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b994f53763020dfae41ee60fc83a402a3e138d73 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/977603ece717851bd1e2b63b4bb68ad856067447 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc5ba96dcaf4a25e7818fbf70a8db71c975bb370 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8f94ccfa896d8ce60b5c390ddbf1a26fe338706 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3cce6cd80cea71fb7076dddd5eaf0a56240f7a4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fbef0659cde72169b0b2981d0e228dc4e05ef7e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a021fbc5e3e1cc824e947cd334837c76da93dba0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88019cfe2ffc4009c7d1707556b9118799b5997f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b49aa6d8ec685df7eeee2d8b6df5e593c9e20412 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d655b35eabc18ccd9048be9fd1bafc5c233f494d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bd09388d6df9ab9f44ccf4655d84b6a05b4a115 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1875ecf67a8b17edd8e8fd1f97ebd97a14f82cf0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7bbcf5fa2bcf677c7107b4ee862031bb27bc0a4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/815a04bf0a0464305e4064581ed97d847c35fd45 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60f85e8ae7c1a4d75c3ed9028d881648b1be8aec | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b58a7c2161a6854e30c99934fc88fe5b501e830c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29f71e4b2666926ec14a7eaeabcde7004236853f | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/098c04879afc7bd91b56ce516d81a73a4905e437 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d23f3dc6c05ef43ec7fcb0a8dffbd04fd312e292 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a89cd9f2a53859498c04c443ec94438752dca3c | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/656256a7a874edf1e9600a442feba41bbc1ea46a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb354369e1c3219887f656378213fe5925e08a4c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/892c38d043c39d8bedb76f93e165dad341cb0f27 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51931c669cac7b968ab10baa96c1b46ba527701a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0f4a3ab228715dbf1929be94bd4f0cb0a9bfcb5 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f63fad0d0b8edce5ad1fc880fcffec2038f2c649 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f95f03309ad360ea64eef69c50588ad1a38522d2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/964a6143439d3312007e9b2eae88b43dee4f8ba8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc88bcf26d0cbd9f579f10fc9fc4bbfa342baa1d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e64f1aecbfd85eff00bfb82305f7537e245e0a16 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/81eadfa570edba05223ac85af94fc3fdf05187e1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea621c61559d2e11e1dd30f9ff71d658bb80874a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd6883049d2f44da1435a0e3f6854a32834edb6a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7243a8700218bab88082e1327a71219a18617490 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cd00000f3645644fe73ecc33069cb608969a2ca | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fce6b6e2ea580a695f43581722691bb07dd21551 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c31c422699b4332dd4ba45631bcf0fe5aed19a3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1394889c4243ca816ca75a42a9c9091b9d24f399 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6405315d3d3edbf9bd1a1dcdadbacf14d876fd76 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a220b1b251e4852edd6f620a04611f32b8c3d649 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b653bea00cd6267234f83fd231a74483ffd21ad5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61e83e6cc88841700ea595873f43352288a79079 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bee1d025193b2afe10f4be620de96fcbfeee038b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e539d2751bd3e212c473d659361f74f459483c4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99e446ee132dea8edf5cf025ab2fa2c3b4ced21a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d580bc3e7d5ae101c94d9d54bdbbb32f805e07fa | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25a0441eab275bcb0956d33a3b90e8dfdb89bab8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b46b70174e97fbb16cef9c73546b1c73a491bad7 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5338f7e0991dc2e5de471248fa4ae4d3be4041c7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c82860a64d4ad92b8b962c19d04699b2a920566 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a16aed3a9eb766c3a559a05a84bac76f83091ae | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/143a3232a7f42f40ff15aca903d6366e7c8c2b39 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4190226ffaccbdee496b62b8010a0a62d5159902 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bb519bf3179634846b1d0f08f4c3600b21aa915 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c08d9668cb721118f7c3b8d230ee92e5e8985e5f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e362931c9a4bc61e191589b5ba759bb39a28d951 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d67eac8f378869fffbd0104d32542ffbeb4b481 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46a6122efa7ffbf9e9de2d5f63ccc631b3c7e522 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/072b04d0bfc5f3d5370fddfc195d323d8988dc20 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/08a39d599bebb173993dad2f9c3264b9c2ef630e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d79e2cd591d557bdfcd80bb21659aebf60845e4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/946c5727f04a27390c229381b42725e4cc063955 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33f3ef8dfc5b26aaef028758af9dd7f9cf2b21ec | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/476c60b37d6a14f01801505566c06ba1a182d97d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344ff801f6a7d21ef912fedfe2c3c16b66446114 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b02bf93cfc8afa39f49b7b7de757136f4515c5e1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddde47eb7d4f86b294def5b00ae4ec7cb082c112 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fcaa13d84fa9ff67a9aacf929ada8be4cc7f15ea | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71e3bd8274d67565b9c76a89d2ca1c5f708a6f78 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a76dc0e143d64434beceaaa19f42d91a5fa0f4c7 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f4ff5f51d18e89edce1339486b56f57f41c8ef7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/524ceb9f49cfac2340e56d4c0ab3e7e7b3bd850f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0864cd77bc54be1fe6e7230dea4017b5a34c8f7e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/195f9d7deb3b81127c76c5c88f0d65c522d4b20e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dd1e9fa9e4655eebd5729d755cb23863d43bf25 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e5db38ff1188bc5e14372dab68be3725b7d056 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1afbccdd57584334bb64b164bdb2bd4815580a26 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/161a41580776f453ac3e14bf45e4d7bbc5e7b50e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e82d1f2d1baf32a91a72d6485c46eed183051df4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6061b80164d1ef66774b59ad3e1aed0764113260 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f9ec4ae5b162d11f64ac3be4080b29a180612a5 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f49ddbe19bf9f73f3cd7e88a6248d94c02d5f6e3 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba7f0037b4439469b4ba166ea23e7d53c7773b11 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/336d26dad4a959a2b862e30d6469d65ad942cb8d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c004df65d512baa1930e2a362729ee8cb60fb504 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef7c3a8b0063aea6d20c18924522919419cd2ba9 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa54d4727fdcac5c8392ebaeb7a8d0211eaeefb4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efc397e6f11b29cb0662f9b1f8694c952a6e55ff | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2828ebe340f135351670c8c5ede7e5f2e4959b0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/957b5c66449eec817371c298c5b1e30ff91471b6 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827eee639ce08f54bc268fd6026454195fd63172 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f1c8d3562f247c9be62aa59f814b55e1e9759a7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1b6164d2edf057feac45f2a5c0b97a8630bbe29e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc984ff89f2c00b351bbfb917c339e2933761be2 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0800dcda8faebc70330e17015ccc2d378de827fa | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9948d06272039285f518486c54923e5e53ae48ac | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e93e0535e87f38795ee54553e317e43e961a6f05 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3dad7c942c12f2515d1a391d3e9748ef452e9e5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a388ed008a79793b7c11a126f1c44212e6debf6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/096d40e88ee2c939131d9275a5dc0a5d4073b8fe | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0491516d1320bf496c9740c582012ddc2a21ed3c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f2f9db6a5646c0c2463ccec38f3b078d8d7b3e3 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf65bfb295648288ba25a9e712b830aee3cd420f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e168c89211be564be01e23aaa48455db6eecc9a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/185da74206d667e55c945be3278bd934dbec588b | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a5f787f2e5f699910c09fb7d844ff25b3ed762 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3cbe6679bd87295552b54eab7e019327b7e81b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aa34f83efb110f75c359c87729d07fad819ba70 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e995c2adf60ee86ef305e5349ad562083fd04c3b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d5bc0e2f88e72858e79b7589918fa7e00f747b8 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5eac92fae57940ae64651eb9a0aa435b04113b2 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/942a59850526d2c027632b72f0e8502b9e15022a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16f93c8cd72143ea1630ba269a8ac6eb39dadf8f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/127b2f0b697139c37c61d461e12cba52f067f4be | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad8256c5423c91d762093797e7111474896795e8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85063acf49726c5a6d88ecc2218f11bf4e82489c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49027d9c4de7dfd15b24692216bea72a48333f97 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c785077ddf61f1379f87acdf276eb94d8d89185 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b745eff3f0c0c1c0b4934ac51ce733a4515113b8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c66b3965c8ce805e4548b0469a1f4b2a62419fc8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac55522f0fbe31743989a0116ae08b04e72b0763 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/539fcae412041ecd14585df110bda97d9f96dd4d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e69ece5266854c3dddbec2202fbb9bbfa729efb2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16097197a248529f54d708b52e60ddfa7f6e6c71 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7fbb2a39aedba0b66cdfa3c3751a998680f8cbbf | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4fbce5a03f6977e4b9ae345b6a986546f834d89 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58034c97610c16391a46520662c2e285eb9ca73 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37da3a5176c6022412138aa4cb45821155b2742b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab5e0f91a9206ff4834e4e01003cd357448d8c36 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d518f5b541a11fe0ec47db226f5d5958d8bcf45a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3dba10c065a1c40eecd5c2b25be51101ff32b41a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/154b8491f485639c9d46750926e9d354494a9c19 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3e13e5f8a37cac26b9b4b445d5dcbe3f9b64f6 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54df6bf6ced93e3c69cf50e28bdd01824d53073d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ff113f7c2930a2c29396ef04e48cc776227a085 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/664e69be9f56d3e9518c88e3999c9778746ea277 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c3ed252737f64522064a9f403250530c5c18174 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cb27113937de0fd06ae581fb3bdef0fd0fab78fc | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e6a876088905b96868fb5c0ff8c32d41977e436 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a890a762aad3a3068a31c7a614591858729277cd | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2cb2377f5e08afcb77eae02fa8ee0f03a68e494 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec64363a6a5f304abd98a3e4b2491ed7afd3cfed | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65cba3c8414454c0e50295c3f859e26007cea2e0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/886acba998a208335595d57cd3479d0ba20828d2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc3193731ec79c51e7c1c8d205adf35410519767 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/485fcaf470ace76c2daf08a5f5a35c9b6641c893 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/94cd543dfadec0bd531553c2a88667280866dacd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c782e1270ef8c79677a7c5b02bfcc2d29c48e62 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fe65514371703146089100ca519e328e6a47cc6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddd6d71fcb0544cff6d13a3632578514d91bb8c4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88526bdacacb342b3e1abf72fffb8e9e8ebc5033 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/039ce035798817eef59bcfac4c35521a76d7efb4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30422d520d433e1261e50b8c562eb93bd0e13a95 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c429c7b187bd4f44bcb6b5b0ea478abc46023934 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20f87098b7c1baa63894533aaa0731cb1bc969a2 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/42a5f3f2cce954e775bc54dacae0c6e734c4b25d | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd7b25b32c3bc09e09258fd8ad8fb56e867309d5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4fb1e54634198d92eb492a12e97cc00d7f2b7b20 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d86b253720e0029ab56eef19200ab337cbe8d9c8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a41cf5f2bcec81052f31336e56d099c9c905590a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bf89ca5e2812cb2c29f050d6c22b13313c64135 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e48b2bf1608e72abfb8f9edc0c07cde547283336 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1b0104da14c4074c4a2f88d66ae9bcd3913fa91 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e8efedfe7380a99733206500625681c647969b9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a28220b8bc3d2917f1d6a6a202e67cb37074d79 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/662c81ea38d754ce383dd6aa326f5bf70f5e8f2d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c29045cf0d6872b0b882cafbe3734f15f5d7c389 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0edd07ef2b32196bafc84a7cbd5314be81ecb47d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7900247d479a1c90ddb209d00325c2b90aadfa7 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9611ad7fe4e9551b9a6e326fbaff81e83e120db7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f400b68070b7ab1d9ac179dde48ca40836201ced | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c37cf3781c68c41cbab0aa50e96950caa8fa4a91 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55c6033f11da1205b9aae338e8ca6360712b4a3c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a7e3e40d0b3320622e9b1e2d37abdd9755184a5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4fbfdd9df006fb9373a72947bfa6b1bb5dce45e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddb5a4ec6add453607a0119782e0315f84e081bf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d3705e7c2b886f4ede586128e020bada6356cce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/03f720b42fc1ace098fa5cf1f262685e00b42d8a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47e7877d79e6461b3dab6b7f6c3912bed027485e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e552999108aebe40649d433469b9c9cc9a5d4fc | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/796a67994a929391c865069ae639ae13d61e85bd | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00845feab35436b351ae91f43ec8cccff6a677bd | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4c34989303ab51344c53ebb7a500814b1b501fe | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/266cdb47cec19e577b7a684ee39dbcc19e92d8d0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a7e30463062f1ffc2c49cff0dfcc553e726e352 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edc2e5f9d033ad218d51145ae01cab7c53928eb5 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc3a452cc41d52349deb7f304891e28f5f763271 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c1880094a69bcc780221b1bed3c2395abf8a3af | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c58cd96c34566c82fc284b5f2258c1a7867c299b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/189ee218ab34a8e217648c5b1d5cfb5aa1cd30b1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e42c8369e85a23c713fe3dca83773c343a4b892 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54480158d75ab735524037fbe35b37c3e5195986 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5bad56a62ee49f00c0875e18117d14e743a3b5 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5f26c9cda3fdc4b5a8843284dd15a62e915b916 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54e290c86fa4b8e02dd16f727476e00853f73a0c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fba9257645be8475cf0f8ebc801a09eb256e01b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91bc7234901cf76c700e237964fa2b3269ae27ff | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3153e9646d0a3b0634dbfd16fcd1bc30c8c254d6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e1f392056ed9dcf54a238d26b526a74d48b8b43 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/724430dcf8524c18d1fa0400b9609db8da243b88 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9632b82f532105649f236b896abf10d7187e18e | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e496e944bfba79364a1fe1b34bc8fe77f5381c0b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1baf629f3802b2c3bf31a11bc2ac84e23fd9d42 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9de7c03d754555314813d0094f49de2060787932 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2be567fa9cb62cb871074e16f0b5bd68119df9c7 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b51365a77d28f679b57213b2ec03184b9c25963d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/718fecd697ea585756257d9230715978a7ec55d8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80bb5edfc0119fdadb5c9e847b95604e192a70de | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8a3c6ea4a66e51ad494328f7bbc20f3b04047de | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a29b7a7f00dc7f05ec6e0effa2aff2c62addc8eb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bcc2879d6791b7a1ce6f157b99e2611569cf5b2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee9e78759a0c663382165c210ed9cc85088de35d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4458f4dbacf9765ce3035c866fd19275f8ce833e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aeeaf38170a0806447d386cb09d11304888886a6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ee0ad3e28e2870d654208a958adc66bcc7c6c2b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5babcc1acc706d92f582c61b7316b11f30f2d3ec | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c16eee633cc6b7370fab97bcd4800054306f385d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1db540d716c497785d1748a8ac4f965637246ac8 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9cb9706a4cde2fad896190843e8fe78a03353231 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04b9b9dd754bf98e46eafa45d4a64998c179e217 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a27371e80122f8f466ababf35f4801b3663c81f | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/179ff2e5e6d7f22df850e3ab6396361b8729c266 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82c122cef266a825ac8c993fd6df17704481c3e5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8104624e204485eb790397de30c2a4718f09fdea | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/464542199b31f546d963efdd43c9041463641402 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/30c31b95429b52bda2cae39382c115f235fdeedf | ORPH powerpc64le | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/91ae63685841d4c385a89e76114e875b1f4d1942 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6a44a5259bd5ddd7712644090133532b296bcc52 | ORPH i686 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/cb62ab5da51bb4270f10973f5ebecb3ee1f42643 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a4387ad5da94ec113c3edb718c9907b945d1cef5 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a24d76f73cbab80a47620f3c3fb6bc9315177869 | arm | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/237dac7049fbbf0e303a12a9038536f9b4856301 | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/3aade88e217f0aeeccd83c11ed1e662ca8004de4 | powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f1c0405bcad70799c4e8268bf29f16910fd641fe | ORPH arceb | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6249939bd0d59b8279199eb128a5cff362eaf8b9 | ORPH aarch64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/82b19d4fa45001a0662f398deac9a55ba67b8953 | ORPH s390x | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c108e7b27ceaa70d226e5d4729ac03973d6e235a | armeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a39bd802fb5010e66237be3188ec7b971a081e85 | arc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1b76303bbd65f30b172ce9597911a4606044516c | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bab272e183b16d7dbd443e139fb0c4ba112a8ca7 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a8b0a92f5b90f97fb092b11fb5fc4243ae1fb3ed | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4b3c0d3b34747824219f69888e2aa02cb874dfb7 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2946ca3dad37a6d691855d9f9ccda8801eab0d4 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b9da3f789fa99a56a1eee481db9efc2cc0b27d3f | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/33b821d5446afe0e0ce120383ceca05c160abd1d | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/414cf38e2a8cfc66cf0028a37d995a6d49e14c62 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b3c0847b264586562462568e923e84fbe2a312f8 | i586 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e4c890b6ce6c0165637465175af75c7e67b62e35 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/918b0dd1f146f6cbdf236de89abc87a6b1f07cda | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7e130b48f6c9a5a882de3c0406b3f0fb1cffed96 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/041696626e1ae703d455228022c18080039d7fea | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9258ed51929cd8cef2ddc03f3f9fe4c4fc010215 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7e637d2d1b9d4748a91bc84c697e0a80f9e54969 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/eb3798c7ccd13bed02be7d59e565b1c9ed1d53a0 | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/679cca546e438e2245e4e9a3a2d53e3cacb08f54 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/8de0ae839b9f28e0f2960564d57c7a30c7a4892f | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5fd1f393ede2c541b0bde7201249eec45beb8318 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9542ed571ece82c4dc3a00767097f30d9568911e | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d8706731c5529c11a5dfcf5dceec707c0efbeac8 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1144b847ea0d4f8a7c4852675b343d8f1521fa06 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/13dd578515270d251a49edc0fbaf4f8aff2c8e3e | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d97df9946146849141479e336f4f2fa287e949d2 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4c6e903ff4a6319971d9b3b07cd4b569682cd01b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc257c615d578b0a8927d614185f674ce60390f6 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fd1f5fd111336e9b1696faa4bb627aa1b2ddb190 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1e1f99861f41a980edc3b41c6ae9db72be6f9fb8 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ee4d25f22176642c10ccbaa79affddade485077d | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e1460c3b1902ef85ef33a1fa8678ec11dc054223 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5398c1fecaf00d83359a2f0fdaa525cf9440d17a | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d1e8a194ae04252dbdf2e7988ff0a44c566b4eb5 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/be5e57bd5b54ee52f854e053baec87e785fd2e04 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ad6c29fc35c05d7cf91a1301973638223c272509 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9ba4e6d8c5099780465d40609c9e653cc5e6451 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/65bc4fa2e50c83ebf247323cd4e8e20322dbc3d9 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/64b25cf5ebfb2b572ab8f06a7062b777eb69389b | powerpc64 | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/624164e8f3f45cbbfe6cc8add2b4990ac3eab9a3 | sh4eb | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/6bf9cc5ff7b1b8c0cbcc3a9df9ab4faa35876c27 | mipsel | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/bff8bb4a7b457bb25af6f99e14f9b6d81e08605c | arm | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/c58042b240fecd7d747e4ff96a25e4bd9679e8c2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/01bc419bf0107cc06a9d7a3d05a4f803825ddc59 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef7b5b83bebadde15110d202e1eadcce29ab50da | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b40d7045b339fa2584a39c87fc57da6056dd81f | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d626b2edda9df2fb91c5c27d1a34064c15fb23ce | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eefe5d2103b17ba0740d008f885b14025c909e46 | mipsel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/813cbb0bbd63a2f6ff360dfab389d4faa9e20878 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a199a12395b3055d21e85361c6c4bf0cc3b60e60 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/64526010ca66b7fe548a8a51564734138d61c990 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/1f1d8420de31e7c20bf38db81f2100d18987b3af | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/1c0efb41b23576c73af9a9fc726ab8b4bdc0d518 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/ac6d021ea0adc263b9612926f05c3e17da7c009a | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b8bc53be9d2fbc0754bacd865c18b1054ed8819b | microblazeel | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/df935fce3610adbeddb4a08decb9d390ddffb72e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/650bb4ee3dac54914ddcf4be5c82f2edb0bab31d | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5722e4a1d746f22cdc15e0df847341b84dd3ccbd | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c875e6cde769e416bd2fe7bb058b5e771d679e01 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/788e5da3583733517d0bf1da27a67d74546b7a38 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e256871951c740573eb1ff7ee91ae89079510152 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1cf8896febac7e411d4cd5eada17c7c0566f823e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/601c072354b07d3f2965d7fc91c2e998d9e07e14 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9e45236f904df8305b4effbfbd871e36cfad91dc | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/70c92d9969d7451987169c10b75eb183392a0653 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/798f9ee4016c7ee2f2d45cd0f093b2cc6aa33b28 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/28fb5894526afdcc76fd4d9af5df950a69603e79 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/26ec2e00722ea6f24aaa666309c55663edfbe058 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e039ed3492d5d2d3411f5f3cb86972a5fabfe0e6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6141a408c59636b396bbc571fe8df27ccc3d5e80 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9382a762afae45c71b3c12fc99257f09b78005a5 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1301ddd7092d2f969494bfaaa4c2639a1be8b7a2 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1cd20e6e20181f378304d5222d3b833619d057a | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/98ee7ac394e210259bc96089a59b69d96d0ad698 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bf8e87cda21e0061a8bdd55fa8e2340e492ee73e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7c56a1d8029597348b9f9fa874258e46874736aa | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5ea573da48524e57342a283c2143515cf5f07df3 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b5fdd9796eebd8651811660b113c8b397c708a98 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/22ba92bafa28eeb80de55ed5893dcbb72cd2523f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b9cadfea141e6b6c9b6707b367e84b641b9c30a1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/34b8a46c0cad8ca1d77e80266aaf1b43da92c2f6 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/013f9db7c6eed2ee84315a11b85b2c5fc702ee62 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/937d39a6569aedd301c67e0575e07e3fafa2795b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fdbb6731b0301f57e12032978127e27ae0ceaf84 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4783ff2933897097572e9a8c213aafd7f28f61fe | nios2 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/992ddf300da2087f0f67f45a5c1a62040530109e | microblazeel | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/dee7415920b099871b24108d8c75385bddf7b417 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/393daca4960dc05364c768bb5f24c288b31cbcd3 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/b8a9dde0c34c944398dcccab2fb4827b9ff436dd | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/d57f860ba928f86f37e2ddad3b559e3db64aa7ee | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/1b73e72875b295272075d7fe7d8da2c917916fda | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/4e51d0531ed46d812ca037370469a8ece268bd75 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e43d1a82ae785ede6d8c0fefa598749b4cf3d5a | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e1cac018f8ddcc48ed6c3d3debb8c1dccd40291b | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9e5c426a075e16d67858522653574d0de93dd4b3 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c5e4ec18608e261439a91dd5e1ca2963e905f24d | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1ddce861ff5816a16f54ca341d0356cb8a131643 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ce9ecc3ac3261e12a0eacaa3e879fd7b36dd1ae6 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/96c8049c7f780b158bee82c872f9b0946b62abc8 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7b10b917ce0366e15b1e537d42b3488df24176ad | i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/66ac66aa0fc2b66dcfed84f7edda3bcc4eaac38c | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e6a20699d5f1d42bc79f26e879386e7c88a05187 | microblazeel | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/de52f39be358f786e68b69636447186c1aadc9fc | arceb | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/f4b2cc931b291797906b0b7a64f39205528cab51 | xtensa | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/288685d037f47e9726e92b53540a48ab294cf224 | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/f2268ad9734a018ffbd6219c1f2b0c119629224b | arm | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/14ba6b581ec22b800a80d3d51ce33e796fbb708c | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4927346428d6bd16120f39c9962c8fb1dad2fbf8 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/736dc5da697a354cd6a58a94598be141ab5ab0d2 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/5c942339e6e6342de903f620c90da4e8710f6341 | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/753660e7a57e00b034a0989176d3cdca5ff1fba3 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bd07d1b02dc2d3eb06135bfe739df9fc3d965f87 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/e8b9c762c62f31ea429d6b39653e6b4b99aa84dc | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5a9a6e06f081486bde1ad9b5d2074626c4b0e9ec | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e1c59743ceb7b91e9bb68182486bc5e3d9d57c84 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a881f562fdfd300567ef51b2700291e1bdbfb094 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/627f7240095264cfeb6e91c6e4d657e363893a8a | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4fac90367a5b385aa02996f2ee38e75021000909 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e38f00a1edc15cef8cbbb5a0f4a521bdc941e13e | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8749da3e12830c3549097fe423498e56f34fc240 | mips64 | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/6ea39a2c0f4341fd8c52d5058ac9c035b2d63935 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/21f2e328a5993016866c42ae701d156186a23b36 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e73756060dc3919a84d0d43379a6cdb1beed6ac8 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5e8d8e8c8752d7627635a6ba462df2a7322fe90a | arceb | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/8061018dcce6759785ce040bcac57b1cb21fbf5a | sparc | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/e7d07d8cda8a9bf3a2c0f59102a7b07d490d050e | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/23d8e4a69886bd09bf35f08624a2f42420410048 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/46bdd574238dfff75f0f1060bc915d4389a6186d | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c2839a190f41b5d44ad08ff2070dc74147f3dfc0 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b48caa9c5d1738824645991b7b0ebf760bf8ed7a | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/71539cf685b35b72c8d9cd105c6e6a7539806468 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/8fc724654729930fd02f79dec74162a841fe16ef | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f68ef83b5edc5a1fb75a84fcf30b9beb4e969e11 | xtensa | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/958643368a933a86a0b4262dc4c6cb5e99b12dd2 | sparc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/9160847c67d8d7490bb31ff1e9a14fac16f20df9 | arc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/8ac19dc8f393d5c7075b2742949d45b513cc42db | mips64el | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/eae68dbdf96b990d00e516310cf04777740c204d | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/218ac4413549104f7b6b3311abd0c2bf3f1120c2 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d9974bbb1f41943d6c971c4b4afb482487c9da3b | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a6c7302a4e08b56c9dc547ce5cfc4d1801609157 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7a2e64905e85897ff575fa98b7f3ab0c287e2b0b | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ab08700ba883e4c46bbf0a73a635901f456f9736 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/84ca0e2d0ed29deb857ed360bbd311670d2b9a87 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5b504a5b413881ab2c22d5c93b1b91439e5c7f6c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5a86ae574a5178a3dda88c0286f57edb8f450ed5 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a313d414e4d1e44e95b07929a24f1edb029e3d1a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/6d5ebd6ea8a11d94ba01efbbcba2f7791fab970c | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/61e58b4aec16fcca90fe42ecbe33574f4dff4b1b | ORPH arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/78ea2d623e899879b309373d1c97e70377b69ee3 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ee9f8a4a7c16f8c133736e56fb44b28f3bc0e307 | microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/18b7469f80d35aea3033ee3a9ad0894c71e84731 | mips64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/394df79a079f4dc2182719f9e4fcbe45ed09299c | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ee872c5f652ef4e5e9d1e3212f8818ecfd6a5c5d | xtensa | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/23840143c63724059ae8573e6ec1d3c1dad34a99 | microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/56d889b515f1f963a68d9779f8cd1c011a59d723 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/86058063275b6806ebfc0e16cc793e943681d180 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27ae94c7386260ffc0cd6ba98fb7a13ba72e0a16 | powerpc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d0b7feb5ce50e0d0712608a7a93181f24881332a | x86_64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/c135de188466368489ffb4d979a67861802c85b0 | arceb | libsodium-1.0.18 | NOK | http://autobuild.buildroot.net/results/0be1b19028eb2a67ae5279eb9b52ddbd523c38fc | microblazeel | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/4d855c06e6549f01169d48b23bd4f8ae44164bcf | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/2515a9e108bbdbbddaadffb096bf921010943b50 | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/08fb023c339e632fd4da7a801df155785583b841 | ORPH arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/4a49f34f3cab4ae1c619f82b673db5a508118ec6 | m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/32cc6ae069b38c496eb91763cb08fe432986f3cc | ORPH nios2 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8b23a989f881c4600aa8dbd7ad0c777852b8f233 | ORPH m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c57c122a7f0e1a037d356ef10c76c94009c64ff1 | ORPH microblaze | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3221a0baf1694081843f64dc56fe27c9a8fb31d9 | ORPH m68k | linux-6.0 | NOK | http://autobuild.buildroot.net/results/102ef4f864a61c30fb1fe7d0682a01cb3951b03d | ORPH sh4eb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/3cd0ddf1199539f4d9b1af84e0552390e5ff8deb | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/fd6083c961e2d92fab3be241e77dda630169639c | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/4ed011efd9ddabbdae5c044b37d301831e053ede | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/16a77c9f8d5e576df3792673a7f1177a45ed2609 | ORPH arc | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/d05431609b28abaa5f8d7ca1250c552ee9217faf | microblazeel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/5781611516e01dfe93dc126f8d0d5ce823ec794f | microblazeel | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/b515410f7f5ce09f2c1a0a33b1074a866c200d8f | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/613373a78b51865bc1b16b526886da8838ac3dcd | ORPH sh4aeb | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/4c37d1a573073148bb8595e53e235fc9a5b96b86 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/ca003c8dde67101696d37aee83eb659b61be12ed | xtensa | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8a776fc2bbe8d5b498d3198bbca12b1ec1283015 | ORPH mips64el | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a1ec22aa8870bc99c1823f4eb5db20436601c6b0 | ORPH mips64el | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d0defd5bb9db08dcc8e716aa4bb0460d41b48be6 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/52eb2a5a05d2a5a370565feb806447cbe38e40ed | mips64 | ncurses-6.1 | NOK | http://autobuild.buildroot.net/results/0b1df05feb7e76dab92e8f557fcbbc71d0962df3 | ORPH aarch64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/83134a6b2442a8253ea35460851a34c08b4af19d | or1k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/a7e8c90d7ee6aea1d83192624770ac57810ea795 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/111de411b453620c9ea288b133adea88459ec57a | mips64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/6ad906749e0e949046e4cc721c94bdaa8f145e23 | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/a192a2e7f7ebe964b4df9fa8b587cb023d7d9bb1 | ORPH aarch64 | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/1feb9e404bdb4296aa444052a456885e28479aff | ORPH i586 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/c9b63855a90530ded549473d6190ce4c23cf09f5 | aarch64_be | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/1f51287fd4de387a155991727aaa8e14fd358049 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/7ba3f6da3079489b74b39457256616c317f92cf2 | ORPH arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c6479517e5ee98a7a8953fd096559d8bead598a7 | mips | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/629c1c5036de21f10c86519cc7eaae050c4b4ae8 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/50379d582726c92be522ca33b56fb5ab32059ac1 | mips64 | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/d7762d17b1ba9c151e66ce67a41fecb53f3546cb | microblaze | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/2f82fd9a98da78deae83a4c15dab096398ed2f1d | ORPH xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/bfe9e6410a16d3b74e886195034a90bd55e4ca33 | arm | python-pycryptodomex-3.15.0 | NOK | http://autobuild.buildroot.net/results/bde442f4fd25009a3443d2f9ec2ff683124271be | arm | qt6base-6.4.0 | NOK | http://autobuild.buildroot.net/results/cdb23094d7f27c51ab82f7c72bb91d0a838c2649 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c0ec443037064015fd4f71383da2b746cdb4de9e | microblazeel | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/dcb31ec8f4d07d0ce76ec38ca7c993cc11e0d51a | powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/fa50faa426185652eeb489b4e260ec22929d0b42 | ORPH microblazeel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/c1bdfc87426a59ed04366e3c0d9c024860819acb | ORPH aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d07f8dd1cb824ad1b19a6eef9f9fe0f4273afff3 | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/642bd6df0ca171916f561a84c3a2dc652d4b5f52 | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6af423281aa59d9ce41ffa24bbcdb8770a570585 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/fbe1103f2f4f766f39d3708bb4fc1dd80306f8f8 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9ae1ae8088f2e6f5b4af8cc7f0a39c6ccd8e363b | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/32e3cbd0386ac9da32ad61c823cfe5c9ff8c1e7c | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b49c757de1dfb5d4e1402e77023a4d9cf1b054c5 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2bf99aba6769a328b081f0f03c291829df63cea1 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3cb1f46816dd5b5da1745b15b256cc790fdeaf20 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/53acf9a2c89100a19c977b389f861738899935df | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/533eb346ccbe2b27b0aea8c58d4c6db9185293d7 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0fef1550dd7c8c42efd499f7baf9af1539cf2e86 | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e24342bfb48a7b9ba0caccfd6ba7c3b5ee552c65 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ed6bceec818095e36324744eb51c420f38f83bd3 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/130e7d637bf8e64e9507a918f789f8df0a2fc498 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8b3edee414c679f9fb1a51a16602aefed25fb54a | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/433bf62be5a73436f4f22eced24a8e4903cbe4bd | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/aef29c8898ae9b8349c334d17f0924243cabf77a | ORPH mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/36333ccc6e27c8e46eecdb275ea3db8cfc1f6230 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7f8b65d5ca7f55349470f43794be220b2e19a579 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/88fd2b79a6767464ad62cb99c831903999793d3e | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d840044a2fff4437f51d7afd1e7614f3fab68c15 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a70eb8f59653946e88fba6effd9fa329884db89a | x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cea77c022eafab388084daddaf33ab9bd5efc361 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ed2b4a3926f945cea6c53a5250fa6b67dcfd87bc | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dd2216a7b1cd14a9d7e154bd969c2dc5df3b4c83 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9991a22980c6e49c7cc119370f2d530d70b7d402 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4fc494a10d89324277b29e19f531f7ba997ad518 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e5e1f160f3df784f0129066a9e32be784605cd1 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/2f8f58282e3ae423e4f793c274726c1203c08ec5 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/e968473de74c6ee91064331370c2025944734046 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/cdec55588089445c2288dc360d2fd86315843812 | ORPH x86_64 | trace-cmd-2.9.7 | NOK | http://autobuild.buildroot.net/results/6330ad2aecd919de3a1e34bfcd7dc96a4640154a | mips | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/88b0993e2139859974be8175e09b80d4504d982a | mips64el | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/2ee713610c330bd234fad5872ae18e0d83ce7e5e | microblaze | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/61117f4682410d2a9b1cb1a2a69257967fd63c86 | arceb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/57a9e2a40fa250d24bbb15e4d57eed5d264778e3 | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/6325f4a14888cfe56af4277f902499c2c125833a | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/104a943cfab7ef9671bee3d46d678493f4060db7 | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/8147b779bcac9f5d548068fae45f7b44a1f576b5 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/c6a707a9cbd630939dc971c41805c94de24a2854 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/7fe215104b9a22ee7be03a8db64281e03c02859d | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/522d13a6f2ddb38689ebd5dc764fc7a8ec73e05f | ORPH arceb | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/314c2ad51762184d2dee7c9a5bd8d9c3e05a2d78 | arceb | whois-5.5.13 | NOK | http://autobuild.buildroot.net/results/896ee456c7e12413a4c32c17c2747ef21190a201 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/dd21f47b89ce8fe7597105c3685fdc3da9700961 | or1k | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/e9e88e7c11750065faf4c9d7955a43fb31f15df1 | ORPH sh4 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/1ed80a485d97965cb8691d2751c1b145c97e77d9 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/13f3dbbe7d3413d05d95e05379b9bb3cb13f8aff | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6bcd5a3f2d6ca576831c0d5b4c90e98b17443dcb | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/28f889889ce7a7056a1cb60ce45c22934ee47514 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 igh-ethercat-1.5.2 | 1 ltp-testsuite-20220527 | 1 nut-2.8.0 | 1 perl-5.34.1 | 1 pixman-0.40.0 | 1 python-ujson-5.2.0 | 1 tealdeer-1.5.0 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/887717cb761dfce9c13746edef036ce86597d1a1 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/37406aa7057fcda3184ac593519a336692918800 | ORPH arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f73db0333438a1b6ae4377d37f8b0e7b4c3a8c5b | sh4 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1bef06960d8c9c03d8fe895f5f8c18b561c58d8d | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e469cb121a4ed77d530657e879137f5ab587b8c8 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f82f0fc6b2e0728d1606e87383fd87b5d8f6a4ad | sparc | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/7d9513fe87ae9da2b2ed53ffaf7313a1b7e708eb | mips64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/0f769795228daae309f8a1174b19ba7b351974ac | arm | nut-2.8.0 | NOK | http://autobuild.buildroot.net/results/adedf3d150a44b9564f053cf8b6f68b687127adf | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2e15d9f788b1a63e9957a4f1258e76cd0a786d75 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/1bbf6ce396f6d40001ca5f98c0c6e2231b876cae | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/2cd86d759f5c25836577926e721a8376d14c73e7 | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/096d80974260e1e40d126b2700c30d65ed2e3b99 | sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/18d846d3dc6e28932bc35e0f9edb502fd66ce9af | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/0a585149a5a493c405fee58443091823464fad36 | -- http://autobuild.buildroot.net From neal.frager at amd.com Thu Oct 13 05:57:23 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 05:57:23 +0000 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221012223315.68f43720@windsurf> References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> Message-ID: Hi Thomas, Thank you for the review. > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly from the > Xilinx git repository built by petalinux. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-fi > rmware > > It will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash. Details of the issue > can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Instead of using a pmufw binary built by the zynqmp-pmufw-builder, > this patch enables a pmufw binary built by petalinux to solve the issue. > > Signed-off-by: Neal Frager > I think the whole commit log is a bit confusing. What this commit allows is to use a PMU FW as an ELF binary in addition to allowing to use a PMU FW provided as a raw binary. > And indeed, this will allow using the PMU FW provided by Petalinux in addition to the ones of zynqmp-pmufw-builder, which is the motivation for the change. I will simplify the commit log. No problem. > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > Spaces around = sign. I will take out the unnecessary spaces. > + > +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) > +UBOOT_ZYNQMP_PMUFW_CONVERT=y > Ditto. > +endif > + > define UBOOT_ZYNQMP_KCONFIG_PMUFW > - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") > + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), > + objcopy -O binary -I elf32-little > +$(UBOOT_ZYNQMP_PMUFW_BASENAME).elf > +$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) > You could also write this like this: > $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), > objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) > and get rid of UBOOT_ZYNQMP_PMUFW_CONVERT entirely. Thank you for this! I was trying to find a simpler solution, but when I could not think of one, I figured someone from the community would help. > I was wondering if the usage of objcopy was correct or whether > $(TARGET_OBJCOPY) would be more correct. But in fact none of them is perfect I guess: the PMU FW is a Microblaze ELF binary, while > $(TARGET_OBJCOPY) will be an ARM64 objcopy, and plain objcopy will be the machine native objcopy, very unlikely to be a Microblaze one :-) > So overall, I guess using objcopy is fine here. I ultimately chose the host objcopy because you are right, the pmufw is not an ARM64 binary. I think using $(TARGET_OBJCOPY) is a bit misleading. > Best regards, > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com Thank you for your support! Best regards, Neal Frager AMD From neal.frager at amd.com Thu Oct 13 06:08:41 2022 From: neal.frager at amd.com (Neal Frager) Date: Thu, 13 Oct 2022 00:08:41 -0600 Subject: [Buildroot] [PATCH v3 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221013060841.2766-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin V2->V3: - removed unnecessary spaces - simplified if statement to check for a pmufw.elf file --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..931a574f0f 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From thomas.petazzoni at bootlin.com Thu Oct 13 06:38:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 08:38:56 +0200 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> Message-ID: <20221013083856.4624e7c6@windsurf> On Thu, 13 Oct 2022 05:57:23 +0000 "Frager, Neal" wrote: > > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > > > Spaces around = sign. > > I will take out the unnecessary spaces. It is the opposite: you need to add spaces around the = signs. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 13 06:39:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 08:39:52 +0200 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> Message-ID: <20221013083952.145dbb8f@windsurf> On Thu, 13 Oct 2022 13:16:16 +0900 Damien Le Moal wrote: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Thanks for the patch. Could you provide the links to the Gitlab CI failures that are being fixed by this, so that we can add them to the commit log when applying? Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From neal.frager at amd.com Thu Oct 13 06:41:44 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 06:41:44 +0000 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013083856.4624e7c6@windsurf> References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> <20221013083856.4624e7c6@windsurf> Message-ID: Hi Thomas, > > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > > > Spaces around = sign. > > I will take out the unnecessary spaces. > It is the opposite: you need to add spaces around the = signs. Thank you for clarifying. I will fix that. Best regards, Neal Frager AMD From neal.frager at amd.com Thu Oct 13 06:49:31 2022 From: neal.frager at amd.com (Neal Frager) Date: Thu, 13 Oct 2022 00:49:31 -0600 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221013064931.60174-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin V2->V3: - removed unnecessary spaces - simplified if statement to check for a pmufw.elf file V3->V4: - added spaces around = sign of UBOOT_ZYNQMP_PMUFW_BASENAME definition --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..0439ec5e4b 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME = $(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From damien.lemoal at opensource.wdc.com Thu Oct 13 07:56:46 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 16:56:46 +0900 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y -- 2.37.3 From damien.lemoal at opensource.wdc.com Thu Oct 13 07:57:58 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 16:57:58 +0900 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013083952.145dbb8f@windsurf> References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> <20221013083952.145dbb8f@windsurf> Message-ID: On 2022/10/13 15:39, Thomas Petazzoni wrote: > On Thu, 13 Oct 2022 13:16:16 +0900 > Damien Le Moal wrote: > >> Gitlab CI reported build failures for the sipeed RISC-V nommu boards >> with the u-boot/sdcard enabled default configuration. The compilation >> errors are related to the openssl/evp.h header file missing, e.g.: >> >> In file included from tools/imagetool.h:24, >> from tools/fit_common.c:20: >> include/image.h:1166:12: fatal error: openssl/evp.h: No such file or >> directory >> 1166 | # include >> | ^~~~~~~~~~~~~~~ >> >> Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config >> files so that host-openssl gets built as a dependency of U-Boot. >> >> Suggested-by: Thomas Petazzoni >> Signed-off-by: Damien Le Moal > > Thanks for the patch. Could you provide the links to the Gitlab CI > failures that are being fixed by this, so that we can add them to the > commit log when applying? Done. I am not sure about the proper format though. I copied similar references I saw in git log. Please let me know if this needs a special format. Thanks ! > > Thanks a lot! > > Thomas -- Damien Le Moal Western Digital Research From peter at korsgaard.com Thu Oct 13 08:27:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 13 Oct 2022 10:27:47 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> (Thomas Petazzoni's message of "Wed, 12 Oct 2022 23:50:08 +0200") References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Message-ID: <87h708nn5o.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > Y2038 is now almost only 15 years away, and embedded systems built > today are potentially going to still be operational in 15 years, and > even though they are supposed to receive updates by then, we all know > how things go, and potentially some of these embedded systems will not > receive any update. Thanks for picking this up! This has been on my todo list for a while as well!. > In 2038, the signed 32-bit representation of time_t used on 32-bit > architectures will overflow, causing all time-related functions to go > back in time in a surprising way. > The Linux kernel has already been modified to support a 64-bit > representation of time_t on 32-bit architectures, but from a C library > perspective, the situation varies: > - glibc uses this 64-bit time_t representation on 32-bit systems > since glibc 2.34, but only if -D_TIME_BITS=64 is > specified. Therefore, this commit adds an option to add this flag > globally to the build, when glibc is the C library and the > architecture is not 64-bit. > - musl uses unconditionally a 64-bit time_t representation on 32-bit > systems since musl 1.2.0. So there is nothing to do here since > Buildroot has been using a musl >= 1.2.0, used since Buildroot > 2020.05. No Buildroot option is needed here. > - uClibc-ng does not support a 64-bit time_t representation on 32-bit > systems, so systems using uClibc-ng will not be Y2038 compliant, at > least for now. No Buildroot option is needed here. > It should be noted that being Y2038-compliant will only work if all > application/library code is correct. For example if an > application/library stores a timestamp in an "int" instead of using > the proper time_t type, then the mechanisms described above will not > fix this, and the application/library will continue to be broken in > terms of Y2038 support. > Possible discussions points about this patch: > - Should we have an option at all, or should we unconditionally pass > -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 > for quite some time. The reasoning for having an option is that > the mechanism is itself opt-in in glibc, and generally relatively > new, so it seemed logical for now to make it optional as well in > Buildroot. I was hoping we could just do it unconditionally, given that musl does it already. Failing that, I would think we could at least make it default y. > - Should we show something (a Config.in comment?) in the musl and > uClibc-ng case to let the user know that the code is Y2038 > compliant (musl) or not Y2038 compliant (uClibc-ng). Or should this > discussion be part of the Buildroot documentation? Having a notice about this in the documentation certainly cannot harm. I'm not sure it makes sense to have it in Config.in. -- Bye, Peter Korsgaard From sebastien.szymanski at armadeus.com Thu Oct 13 08:57:33 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Thu, 13 Oct 2022 10:57:33 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 Message-ID: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> Drop first patch, upstreamed: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f Depends on kernel headers >= 4.4 for struct mmc_ioc_multi_cmd Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 Signed-off-by: S?bastien Szymanski --- Changes for v2: - needs kernel headers >= 4.4 ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- package/mmc-utils/Config.in | 6 +-- package/mmc-utils/mmc-utils.hash | 4 +- package/mmc-utils/mmc-utils.mk | 2 +- 4 files changed, 6 insertions(+), 43 deletions(-) delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch deleted file mode 100644 index 7725f9ca5e..0000000000 --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 28 Sep 2019 20:44:52 +0200 -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 - -Fix following error with gcc 4.9: - -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] - struct rpmb_frame frame_status = {0}; - -Fixes: - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 - -Signed-off-by: Fabrice Fontaine -[Upstream status: sent to linux-mmc at vger.kernel.org] ---- - mmc_cmds.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/mmc_cmds.c b/mmc_cmds.c -index fb37189..6b09f26 100644 ---- a/mmc_cmds.c -+++ b/mmc_cmds.c -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, - u_int16_t rpmb_type; - struct mmc_ioc_multi_cmd *mioc; - struct mmc_ioc_cmd *ioc; -- struct rpmb_frame frame_status = {0}; -+ struct rpmb_frame frame_status; -+ -+ memset(&frame_status, 0, sizeof(frame_status)); - - if (!frame_in || !frame_out || !out_cnt) - return -EINVAL; --- -2.23.0 - diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac445..ac32ae68bf 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -1,10 +1,10 @@ config BR2_PACKAGE_MMC_UTILS bool "mmc-utils" - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 help MMC utils https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git -comment "mmc-utils needs a toolchain w/ headers >= 3.0" - depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 +comment "mmc-utils needs a toolchain w/ headers >= 4.4" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash index e8b2826612..1256f63487 100644 --- a/package/mmc-utils/mmc-utils.hash +++ b/package/mmc-utils/mmc-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..bf940967ef 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 -- 2.37.3 From thomas.petazzoni at bootlin.com Thu Oct 13 12:05:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 14:05:14 +0200 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> <20221013083952.145dbb8f@windsurf> Message-ID: <20221013140514.7d88a068@windsurf> On Thu, 13 Oct 2022 16:57:58 +0900 Damien Le Moal wrote: > Done. I am not sure about the proper format though. I copied similar references > I saw in git log. Please let me know if this needs a special format. The format you have used is perfect, it follows what we normally do. Thanks for the v2! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From jesseevg at gmail.com Thu Oct 13 12:10:40 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Thu, 13 Oct 2022 14:10:40 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/qt6: Change license hashes Message-ID: <20221013121041.1398841-1-jesseevg@gmail.com> There was a major rework of how licenses are used in the Qt codebase along with a new location for all licenses, so change the hash file to reflect these changes https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 Changes for v2: - Also adjust the makefiles to refer to these new license file names - Added myself to the developers for the qt6 package for good measure Signed-off-by: Jesse Van Gavere --- DEVELOPERS | 1 + package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- package/qt6/qt6base/qt6base.mk | 4 ++-- package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- package/qt6/qt6serialport/qt6serialport.mk | 4 ++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..6cb8d0fc54 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1478,6 +1478,7 @@ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ N: Jesse Van Gavere +F: package/qt6/ F: package/qt6/qt6serialport/ N: Jianhui Zhao diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index 5dd26973fa..b004347a5a 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -2,8 +2,13 @@ sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSE.FDL +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb LICENSES/Apache-2.0.txt +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 LICENSES/BSL-1.0.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc LICENSES/MIT.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6base/qt6base.mk b/package/qt6/qt6base/qt6base.mk index b7ee6037f3..b53d53c653 100644 --- a/package/qt6/qt6base/qt6base.mk +++ b/package/qt6/qt6base/qt6base.mk @@ -7,8 +7,8 @@ QT6BASE_VERSION = $(QT6_VERSION) QT6BASE_SITE = $(QT6_SITE) QT6BASE_SOURCE = qtbase-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6BASE_VERSION).tar.xz -QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 (docs) -QT6BASE_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL +QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 no invariants (docs) +QT6BASE_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt QT6BASE_DEPENDENCIES = \ host-ninja \ host-qt6base \ diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index fb1b3dcf6b..887f67b2ae 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -2,8 +2,10 @@ sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d LICENSE.FDL +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialport/qt6serialport.mk b/package/qt6/qt6serialport/qt6serialport.mk index 01763657b8..03197fd60d 100644 --- a/package/qt6/qt6serialport/qt6serialport.mk +++ b/package/qt6/qt6serialport/qt6serialport.mk @@ -9,8 +9,8 @@ QT6SERIALPORT_SITE = $(QT6_SITE) QT6SERIALPORT_SOURCE = qtserialport-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALPORT_VERSION).tar.xz QT6SERIALPORT_INSTALL_STAGING = YES QT6SERIALPORT_SUPPORTS_IN_SOURCE_BUILD = NO -QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 (docs) -QT6SERIALPORT_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL +QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 no invariants (docs) +QT6SERIALPORT_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt QT6SERIALPORT_CONF_OPTS = \ -GNinja \ -DQT_HOST_PATH=$(HOST_DIR) \ -- 2.34.1 From dimi at tpm.dev Thu Oct 13 12:17:25 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Thu, 13 Oct 2022 15:17:25 +0300 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: Hi Arnout, Please review this version bump. Thanks, Dimi On 2022-10-12 10:54 AM, Dimi Tomov wrote: > From: Dimitar Tomov > > This patch series bumps the wolftpm version to the latest available and > adds one new config option for controlling debug messages in wolftpm. > > Signed-off-by: Dimitar Tomov > --- > package/wolftpm/wolftpm.hash | 2 +- > package/wolftpm/wolftpm.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolftpm/wolftpm.hash > b/package/wolftpm/wolftpm.hash > index d24df58eaa..e256967a01 100644 > --- a/package/wolftpm/wolftpm.hash > +++ b/package/wolftpm/wolftpm.hash > @@ -1,4 +1,4 @@ > # Hash from > https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz > -sha256 > 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b > wolftpm-2.4.0.tar.gz > +sha256 > 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b > wolfTPM-2.6.0.tar.gz > # Locally calculated > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE > diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk > index 7e8a108585..f217322545 100644 > --- a/package/wolftpm/wolftpm.mk > +++ b/package/wolftpm/wolftpm.mk > @@ -4,7 +4,7 @@ > # > > ################################################################################ > > -WOLFTPM_VERSION = 2.4.0 > +WOLFTPM_VERSION = 2.6.0 > WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) > WOLFTPM_INSTALL_STAGING = YES > WOLFTPM_LICENSE = GPL-2.0+ -- Founder of TPM.dev From peter at korsgaard.com Thu Oct 13 12:56:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 13 Oct 2022 14:56:27 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/nodejs: security bump to version 14.20.1 Message-ID: <20221013130136.1D18F86BFE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d805244ed2bc014ed2d170a4c3e31e3836fc722b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes the following security issues: - CVE-2022-32212: DNS rebinding in --inspect on macOS (High) - CVE-2022-32213: bypass via obs-fold mechanic (Medium) - CVE-2022-35256: HTTP Request Smuggling Due to Incorrect Parsing of Header Fields (Medium) https://nodejs.org/en/blog/vulnerability/september-2022-security-releases/ Signed-off-by: Peter Korsgaard --- package/nodejs/nodejs.hash | 4 ++-- package/nodejs/nodejs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/nodejs/nodejs.hash b/package/nodejs/nodejs.hash index ab79787e45..769fddae3b 100644 --- a/package/nodejs/nodejs.hash +++ b/package/nodejs/nodejs.hash @@ -1,5 +1,5 @@ -# From https://nodejs.org/dist/v14.20.0/SHASUMS256.txt -sha256 2b5098498889d1e6a9709d63f3d6f94e696a5ad8221618c5d51159cee363996a node-v14.20.0.tar.xz +# From https://nodejs.org/dist/v14.20.1/SHASUMS256.txt +sha256 365057ea661923cbfa71bdd7a8d0ace9ddff8d22d431ad92355f8433cecff14d node-v14.20.1.tar.xz # Hash for license file sha256 d05c4319d4955d6b3c7beab2711ff61448b31889560d4b125bfbd35f16d3d3af LICENSE diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 262d60e86b..5bee082f14 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -4,7 +4,7 @@ # ################################################################################ -NODEJS_VERSION = 14.20.0 +NODEJS_VERSION = 14.20.1 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ From jesseevg at gmail.com Thu Oct 13 13:06:07 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Thu, 13 Oct 2022 15:06:07 +0200 Subject: [Buildroot] Changing configuration options of package in another one Message-ID: Hello, I'm in a bit of a peculiar situation for which I'm not sure what the correct solution is. I'm trying to implement the qt6 remote objects package, this has a dependency on host-qt6remoteobjects because it needs a host tool from it to build the target package, however, to build the host package it needs qt6base network enabled in the host qt6 build, this is by default turned off as it's not a necessity for the host tools needed to build the target package. So to make it work I've added an enable for the network module to HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, what should I do here? Manipulate the qt6 host build it in the remote objects package? Or maybe turn on the network module for the qt6 host build whenever the target qt6 network module gets enabled? Best regards, Jesse From luca.ceresoli at bootlin.com Thu Oct 13 13:18:34 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Thu, 13 Oct 2022 15:18:34 +0200 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013064931.60174-1-neal.frager@amd.com> References: <20221013064931.60174-1-neal.frager@amd.com> Message-ID: <20221013151834.60d4a353@booty> Hello Neal, On Thu, 13 Oct 2022 00:49:31 -0600 Neal Frager wrote: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux in > addition to still supporting pmufw.bin binaries built > by the zynqmp-pmufw-builder. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > > Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Thank you very much for working on a solution to this unpleasant situation. I still would like to address it, but spare time is not easily available... however I'm always happy to received patches for zynqmp-pmufw-builder! ;-) -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From neal.frager at amd.com Thu Oct 13 13:54:41 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 13:54:41 +0000 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013151834.60d4a353@booty> References: <20221013064931.60174-1-neal.frager@amd.com> <20221013151834.60d4a353@booty> Message-ID: Hello Luca, > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly from the > Xilinx git repository built by petalinux in addition to still > supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-fi > rmware > > Signed-off-by: Neal Frager > Reviewed-by: Luca Ceresoli > Thank you very much for working on a solution to this unpleasant situation. I still would like to address it, but spare time is not easily available... however I'm always happy to received patches for zynqmp-pmufw-builder! ;-) Thank you for your understanding. As you can see with this patch, pmufw.bin files are still accepted. The moment zynqmp-pmufw-builder is fixed, developers can use it with buildroot again. I understand the lack of spare time. If I ever get some, I will take a closer look at how to patch the zynqmp-pmufw-builder microblaze compiler. Best regards, Neal Frager AMD From thomas.petazzoni at bootlin.com Thu Oct 13 14:39:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 16:39:10 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> Message-ID: <20221013163910.3c6d9c8f@windsurf> On Wed, 12 Oct 2022 23:49:37 +0000 Robert Hancock wrote: > There's some chance of software being broken by enabling this, with > either a compile or runtime failure. For example, applications that > assume sizeof(time_t) == sizeof(long) would work on 32-bit platforms > with a 32-bit time and 64-bit platforms with a 64-bit time, but fail > with a 64-bit time on 32-bit. I believe I've seen this when trying to > build software with that option, so turning this on unconditionally > might be unwise, unless some build tests of the supported packages > have been done.. There will definitely be build testing: our autobuilders are testing 24/7 random configurations of Buildroot. So as soon as we introduce this option, there would be builds with BR2_TIME_BITS_64=y enabled, which would raise build issues if there's any. Of course, the more tricky part are runtime issues, which are essentially impossible to detect until someone runs into the problem. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From d.lang at abatec.at Thu Oct 13 15:01:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Thu, 13 Oct 2022 15:01:54 +0000 Subject: [Buildroot] [PATCH 1/2] package/iwd: drop dbus check Message-ID: Since 6f5f6bcd8 dbus is selected when iwd is selected. Signed-off-by: Daniel Lang --- package/iwd/iwd.mk | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..8497fd1141 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -17,15 +17,10 @@ IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell -IWD_DEPENDENCIES = ell - -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share +IWD_DEPENDENCIES = ell dbus ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) -- 2.25.1 From d.lang at abatec.at Thu Oct 13 15:03:08 2022 From: d.lang at abatec.at (Lang Daniel) Date: Thu, 13 Oct 2022 15:03:08 +0000 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure Message-ID: configure.ac is no longer patched, autoreconfigure isn't needed. Signed-off-by: Daniel Lang --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 8497fd1141..fe79704641 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ -- 2.25.1 From raphael.pavlidis at gmail.com Thu Oct 13 16:34:32 2022 From: raphael.pavlidis at gmail.com (Raphael Pavlidis) Date: Thu, 13 Oct 2022 18:34:32 +0200 Subject: [Buildroot] [PATCH v3 1/1] package/shadow: new package In-Reply-To: <20220904124315.12728-1-raphael.pavlidis@gmail.com> References: <20220904124315.12728-1-raphael.pavlidis@gmail.com> Message-ID: <20221013163432.18545-1-raphael.pavlidis@gmail.com> shadow provides utilities to deal with user accounts. The shadow package includes the necessary programs for converting UNIX password files to the shadow password format, plus programs for managing user and group accounts. Especially it is useful if rootless podman container should be used, which requires newuidmap and newgidmap. Signed-off-by: Raphael Pavlidis --- Changes v2 -> v3: - remove nscd support - remove sssd support - remove group name max length parameter - remove su build - improve help text of subordinate-ids - use a define instead of variable for SHADOW_ACCOUNT_TOOLS_SETUID SHADOW_SUBORDINATE_IDS_PERMISSIONS and Changes v1 -> v2: - DEVELOPERS: add Raphael Pavlids for shadow DEVELOPERS | 3 +- package/Config.in | 1 + package/shadow/Config.in | 61 +++++++++++++++++ package/shadow/shadow.hash | 3 + package/shadow/shadow.mk | 133 +++++++++++++++++++++++++++++++++++++ 5 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 package/shadow/Config.in create mode 100644 package/shadow/shadow.hash create mode 100644 package/shadow/shadow.mk diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..0dad0ba0ba 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2474,7 +2474,8 @@ F: support/testing/tests/package/test_python_jmespath.py F: support/testing/tests/package/test_python_rsa.py F: support/testing/tests/package/test_python_s3transfer.py -N: Raphael Pavlidis +N: Raphael Pavlidis +F: package/shadow/ F: package/slirp4netns/ N: Refik Tuzakli diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..d9ead48647 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2642,6 +2642,7 @@ menu "System tools" source "package/sdbus-cpp/Config.in" source "package/sdbusplus/Config.in" source "package/seatd/Config.in" + source "package/shadow/Config.in" source "package/smack/Config.in" source "package/start-stop-daemon/Config.in" source "package/supervisor/Config.in" diff --git a/package/shadow/Config.in b/package/shadow/Config.in new file mode 100644 index 0000000000..6b1fe0a61f --- /dev/null +++ b/package/shadow/Config.in @@ -0,0 +1,61 @@ +menuconfig BR2_PACKAGE_SHADOW + bool "shadow" + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14 + help + Utilities to deal with user accounts. + + https://github.com/shadow-maint/shadow + +if BR2_PACKAGE_SHADOW + +config BR2_PACKAGE_SHADOW_SHADOWGRP + bool "shadowgrp" + help + Enable shadow group support. + +config BR2_PACKAGE_SHADOW_ACCOUNT_TOOLS_SETUID + bool "account-tools-setuid" + depends on BR2_USE_MMU # linux-pam + depends on BR2_ENABLE_LOCALE # linux-pam + depends on BR2_USE_WCHAR # linux-pam + depends on !BR2_STATIC_LIBS # linux-pam + select BR2_PACKAGE_LINUX_PAM + help + Install the user and group management tools (e.g. groupadd) with setuid and + authenticate the callers via PAM. + +comment "account-tools-setuid needs a toolchain w/ shared libs, wchar, locale" + depends on BR2_USE_MMU + depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR || !BR2_ENABLE_LOCALE + +config BR2_PACKAGE_SHADOW_UTMPX + bool "utmpx" + help + Enable loggin in utmpx / wtmpx. + +config BR2_PACKAGE_SHADOW_SUBORDINATE_IDS + bool "subordinate-ids" + help + Support subordinate ids. Helpful to use container solution like podman + without root. + +config BR2_PACKAGE_SHADOW_SHA_CRYPT + bool "sha-crypt" + default y + help + Allow the SHA256 and SHA512 password encryption algorithms. + +config BR2_PACKAGE_SHADOW_BCRYPT + bool "bcrypt" + help + Allow the bcrypt password encryption algorithm. + +config BR2_PACKAGE_SHADOW_YESCRYPT + bool "yescrypt" + help + Allow the yescrypt password encryption algorithm. + +endif # BR2_PACKAGE_SHADOW + +comment "shadow needs a toolchain w/ headers >= 4.14" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14 diff --git a/package/shadow/shadow.hash b/package/shadow/shadow.hash new file mode 100644 index 0000000000..6b9faac10f --- /dev/null +++ b/package/shadow/shadow.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 41f093ce58b2ae5f389a1c5553e0c18bc73e6fe27f66273891991198a7707c95 shadow-4.11.1.tar.xz +sha256 3d25ab8f43fdc14624296a56ff8dc3e72e499ad35f32ae0c803f4959cfe17c0a COPYING diff --git a/package/shadow/shadow.mk b/package/shadow/shadow.mk new file mode 100644 index 0000000000..261f28dd28 --- /dev/null +++ b/package/shadow/shadow.mk @@ -0,0 +1,133 @@ +################################################################################ +# +# shadow +# +################################################################################ + +SHADOW_VERSION = 4.11.1 +SHADOW_SITE = https://github.com/shadow-maint/shadow/releases/download/v$(SHADOW_VERSION) +SHADOW_SOURCE = shadow-$(SHADOW_VERSION).tar.xz +SHADOW_LICENSE = BSD-3-Clause +SHADOW_LICENSE_FILES = COPYING + +SHADOW_CONF_OPTS = \ + --disable-man \ + --without-btrfs \ + --without-nscd \ + --without-skey \ + --without-sssd \ + --without-su \ + --without-tcb + +ifeq ($(BR2_PACKAGE_SHADOW_SHADOWGRP),y) +SHADOW_CONF_OPTS += --enable-shadowgrp +else +SHADOW_CONF_OPTS += --disable-shadowgrp +endif + +ifeq ($(BR2_PACKAGE_SHADOW_ACCOUNT_TOOLS_SETUID),y) +SHADOW_CONF_OPTS += --enable-account-tools-setuid +define SHADOW_ACCOUNT_TOOLS_SETUID_PERMISSIONS + /usr/sbin/chgpasswd f 4755 0 0 - - - - - + /usr/sbin/chpasswd f 4755 0 0 - - - - - + /usr/sbin/groupadd f 4755 0 0 - - - - - + /usr/sbin/groupdel f 4755 0 0 - - - - - + /usr/sbin/groupmod f 4755 0 0 - - - - - + /usr/sbin/newusers f 4755 0 0 - - - - - + /usr/sbin/useradd f 4755 0 0 - - - - - + /usr/sbin/usermod f 4755 0 0 - - - - - +endef +else +SHADOW_CONF_OPTS += --disable-account-tools-setuid +endif + +ifeq ($(BR2_PACKAGE_SHADOW_UTMPX),y) +SHADOW_CONF_OPTS += --enable-utmpx +else +SHADOW_CONF_OPTS += --disable-utmpx +endif + +ifeq ($(BR2_PACKAGE_SHADOW_SUBORDINATE_IDS),y) +SHADOW_CONF_OPTS += --enable-subordinate-ids +define SHADOW_SUBORDINATE_IDS_PERMISSIONS + /usr/bin/newuidmap f 4755 0 0 - - - - - + /usr/bin/newgidmap f 4755 0 0 - - - - - +endef +else +SHADOW_CONF_OPTS += --disable-subordinate-ids +endif + +ifeq ($(BR2_PACKAGE_ACL),y) +SHADOW_CONF_OPTS += --with-acl +SHADOW_DEPENDENCIES += acl +else +SHADOW_CONF_OPTS += --without-acl +endif + +ifeq ($(BR2_PACKAGE_ATTR),y) +SHADOW_CONF_OPTS += --with-attr +SHADOW_DEPENDENCIES += attr +else +SHADOW_CONF_OPTS += --without-attr +endif + +ifeq ($(BR2_PACKAGE_AUDIT),y) +SHADOW_CONF_OPTS += --with-audit +SHADOW_DEPENDENCIES += audit +else +SHADOW_CONF_OPTS += --without-audit +endif + +ifeq ($(BR2_PACKAGE_CRACKLIB),y) +SHADOW_CONF_OPTS += --with-libcrack +SHADOW_DEPENDENCIES += cracklib +else +SHADOW_CONF_OPTS += --without-libcrack +endif + +ifeq ($(BR2_PACKAGE_LIBSELINUX),y) +SHADOW_CONF_OPTS += --with-selinux +SHADOW_DEPENDENCIES += libselinux libsemanage +else +SHADOW_CONF_OPTS += --without-selinux +endif + +# linux-pam is also used without account-tools-setuid enabled +ifeq ($(BR2_PACKAGE_LINUX_PAM),y) +SHADOW_CONF_OPTS += --with-libpam +SHADOW_DEPENDENCIES += linux-pam +else +SHADOW_CONF_OPTS += --without-libpam +endif + +ifeq ($(BR2_PACKAGE_SHADOW_SHA_CRYPT),y) +SHADOW_CONF_OPTS += --with-sha-crypt +else +SHADOW_CONF_OPTS += --without-sha-crypt +endif + +ifeq ($(BR2_PACKAGE_SHADOW_BCRYPT),y) +SHADOW_CONF_OPTS += --with-bcrypt +else +SHADOW_CONF_OPTS += --without-bcrypt +endif + +ifeq ($(BR2_PACKAGE_SHADOW_YESCRYPT),y) +SHADOW_CONF_OPTS += --with-yescrypt +else +SHADOW_CONF_OPTS += --without-yescrypt +endif + +define SHADOW_PERMISSIONS + /usr/bin/chage f 4755 0 0 - - - - - + /usr/bin/chfn f 4755 0 0 - - - - - + /usr/bin/chsh f 4755 0 0 - - - - - + /usr/bin/expiry f 4755 0 0 - - - - - + /usr/bin/gpasswd f 4755 0 0 - - - - - + /usr/bin/newgrp f 4755 0 0 - - - - - + /usr/bin/passwd f 4755 0 0 - - - - - + $(SHADOW_ACCOUNT_TOOLS_SETUID) + $(SHADOW_SUBORDINATE_IDS_PERMISSIONS) +endef + +$(eval $(autotools-package)) -- 2.35.1 From kyle at balena.io Thu Oct 13 16:42:44 2022 From: kyle at balena.io (Kyle Harding) Date: Thu, 13 Oct 2022 12:42:44 -0400 Subject: [Buildroot] [PATCH 1/1] package/unbound: bump version to 1.17.0 Message-ID: <20221013164244.150039-1-kyle@balena.io> Signed-off-by: Kyle Harding --- package/unbound/unbound.hash | 4 ++-- package/unbound/unbound.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/unbound/unbound.hash b/package/unbound/unbound.hash index cef8edc4a2..147ac7b13a 100644 --- a/package/unbound/unbound.hash +++ b/package/unbound/unbound.hash @@ -1,5 +1,5 @@ -# From https://nlnetlabs.nl/downloads/unbound/unbound-1.16.3.tar.gz.sha256 -sha256 ea0c6665e2c3325b769eac1dfccd60fe1828d5fcf662650039eccb3f67edb28e unbound-1.16.3.tar.gz +# From https://nlnetlabs.nl/downloads/unbound/unbound-1.17.0.tar.gz.sha256 +sha256 dcbc95d7891d9f910c66e4edc9f1f2fde4dea2eec18e3af9f75aed44a02f1341 unbound-1.17.0.tar.gz # Locally calculated sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSE diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index 73a460d103..d86d9c2067 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -4,7 +4,7 @@ # ################################################################################ -UNBOUND_VERSION = 1.16.3 +UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause -- 2.36.2 From giulio.benetti at benettiengineering.com Thu Oct 13 17:10:53 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 13 Oct 2022 19:10:53 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> References: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> Message-ID: <8c244426-0886-42a3-6d09-c9798a517a00@benettiengineering.com> Hi S?bastien, On 13/10/22 10:57, S?bastien Szymanski wrote: > Drop first patch, upstreamed: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f > > Depends on kernel headers >= 4.4 for struct mmc_ioc_multi_cmd > > Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 > > Signed-off-by: S?bastien Szymanski Reviewed-by: Giulio Benetti Thank you Best regards -- Giulio Benetti Benetti Engineering sas > --- > > Changes for v2: > - needs kernel headers >= 4.4 > > ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- > package/mmc-utils/Config.in | 6 +-- > package/mmc-utils/mmc-utils.hash | 4 +- > package/mmc-utils/mmc-utils.mk | 2 +- > 4 files changed, 6 insertions(+), 43 deletions(-) > delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > > diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > deleted file mode 100644 > index 7725f9ca5e..0000000000 > --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sat, 28 Sep 2019 20:44:52 +0200 > -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 > - > -Fix following error with gcc 4.9: > - > -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] > - struct rpmb_frame frame_status = {0}; > - > -Fixes: > - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: sent to linux-mmc at vger.kernel.org] > ---- > - mmc_cmds.c | 4 +++- > - 1 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/mmc_cmds.c b/mmc_cmds.c > -index fb37189..6b09f26 100644 > ---- a/mmc_cmds.c > -+++ b/mmc_cmds.c > -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, > - u_int16_t rpmb_type; > - struct mmc_ioc_multi_cmd *mioc; > - struct mmc_ioc_cmd *ioc; > -- struct rpmb_frame frame_status = {0}; > -+ struct rpmb_frame frame_status; > -+ > -+ memset(&frame_status, 0, sizeof(frame_status)); > - > - if (!frame_in || !frame_out || !out_cnt) > - return -EINVAL; > --- > -2.23.0 > - > diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in > index 850aeac445..ac32ae68bf 100644 > --- a/package/mmc-utils/Config.in > +++ b/package/mmc-utils/Config.in > @@ -1,10 +1,10 @@ > config BR2_PACKAGE_MMC_UTILS > bool "mmc-utils" > - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 > help > MMC utils > > https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git > > -comment "mmc-utils needs a toolchain w/ headers >= 3.0" > - depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > +comment "mmc-utils needs a toolchain w/ headers >= 4.4" > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 > diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash > index e8b2826612..1256f63487 100644 > --- a/package/mmc-utils/mmc-utils.hash > +++ b/package/mmc-utils/mmc-utils.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz > -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h > +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz > +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c847378692..bf940967ef 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 > +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 > MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git > MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 From giulio.benetti at benettiengineering.com Thu Oct 13 17:24:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 13 Oct 2022 19:24:33 +0200 Subject: [Buildroot] [PATCH] package/libnss: bump version to 3.84 Message-ID: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/libnss/libnss.hash | 4 ++-- package/libnss/libnss.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnss/libnss.hash b/package/libnss/libnss.hash index 026344668f..2b34cc1a77 100644 --- a/package/libnss/libnss.hash +++ b/package/libnss/libnss.hash @@ -1,4 +1,4 @@ -# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_83_RTM/src/SHA256SUMS -sha256 ab23ea67f964090b8b73c80a674082571c36e5f4eba92057ac648c9c1def0128 nss-3.83.tar.gz +# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_84_RTM/src/SHA256SUMS +sha256 9a387ffe350ff14f001d943f96cc0c064891551d71e1a97a5ddbffe7f1207a25 nss-3.84.tar.gz # Locally calculated sha256 a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4 nss/COPYING diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 1099ae199c..041b2cfc56 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNSS_VERSION = 3.83 +LIBNSS_VERSION = 3.84 LIBNSS_SOURCE = nss-$(LIBNSS_VERSION).tar.gz LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(subst .,_,$(LIBNSS_VERSION))_RTM/src LIBNSS_DISTDIR = dist -- 2.34.1 From mmayer at broadcom.com Fri Oct 14 00:50:55 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Thu, 13 Oct 2022 17:50:55 -0700 Subject: [Buildroot] [PATCH] mmc-utils: allow enabling of "dangerous commands" Message-ID: <20221014005055.746362-1-mmayer@broadcom.com> Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer --- package/mmc-utils/Config.in | 8 ++++++++ package/mmc-utils/mmc-utils.mk | 9 ++++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac44571..0283658a7a57 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + depends on BR2_PACKAGE_MMC_UTILS + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c84737869264..a176cb94ae43 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,19 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) CFLAGS=$(MMC_UTILS_CFLAGS) \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS -- 2.34.1 From thomas.petazzoni at bootlin.com Fri Oct 14 05:44:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 05:44:51 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-13 Message-ID: <20221014054456.C12B360888@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-13 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 9 | 2 | 0 | 11 | 2022.08.x | 17 | 11 | 0 | 28 | master | 98 | 744 | 9 | 851 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 313 host-gcc-initial-11.3.0 | 49 bearssl-0.6 | 26 berkeleydb-5.3.28 | 25 coremark-pro-1.1.2743 | 23 slang-2.3.2 | 22 ca-certificates-20211016 | 18 host-f2fs-tools-1.15.0 | 11 libnss-3.83 | 11 crun-1.5 | 10 host-binutils-2.38 | 9 brltty | 8 elfutils-0.186 | 7 dahdi-linux-5c840cf43838e06... | 6 gmrender-resurrect-0.0.9 | 6 libglib2-2.72.3 | 6 sdl-1.2.15 | 6 unknown | 6 dmraid-1.0.0.rc16-3 | 5 efivar-38 | 5 host-binutils-2.39 | 5 igd2-for-linux-2.1 | 5 musepack-r475 | 5 fbset-2.1 | 4 frotz-2.54 | 4 host-gcc-final-11.3.0 | 4 host-go-1.19.1 | 4 host-rust-1.64.0 | 4 host-sentry-cli-1.59.0 | 4 libsvgtiny-ea9d99fc8b231c22... | 4 zstd-1.5.2 | 4 boost-1.80.0 | 3 btrfs-progs-5.16.2 | 3 dash-0.5.11.5 | 3 freeradius-server-3.2.0 | 3 host-protobuf-c-1.4.1 | 3 jhead-3.06.0.1 | 3 libcap-ng-0.8.3 | 3 linuxptp-3.1.1 | 3 openswan-3.0.0 | 3 refpolicy-2.20220106 | 3 umtprd-1.6.2 | 3 zeek-4.1.1 | 3 alsa-lib-1.2.7.2 | 2 autofs-5.1.8 | 2 batman-adv-2021.4 | 2 botan-2.19.2 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 flite-2.2 | 2 gensio-2.5.5 | 2 gerbera-1.10.0 | 2 hdparm-9.63 | 2 host-binutils-2.37 | 2 host-gcc-initial-12.2.0 | 2 host-pahole-73383b3a39afe86... | 2 host-riscv-isa-sim-1.1.0 | 2 libgpg-error-1.45 | 2 libmdbx-0.11.11 | 2 linux-6.0 | 2 musl-1.2.3 | 2 nanocom-1.0 | 2 ntp-4.2.8p15 | 2 systemd-250.4 | 2 sysvinit-2.99 | 2 tcf-agent-1.7.0 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 apcupsd-3.14.14 | 1 attr-2.5.1 | 1 brltty-6.5 | 1 crucible-2022.05.25 | 1 dieharder-3.31.1 | 1 ding-libs-0.6.2 | 1 duma-2.5.15 | 1 file-5.41 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 gdal-3.5.1 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 gpm-1.20.7 | 1 gsl-2.6 | 1 hans-1.0 | 1 host-berkeleydb-5.3.28 | 1 host-delve-1.8.0 | 1 host-gauche-0.9.12 | 1 host-gcc-initial-10.4.0 | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 lcdproc-0.5.9 | 1 libarchive-3.6.1 | 1 libee-0.4.1 | 1 linux-5.10.145-cip17 | 1 linux-5.10.145-cip17-rt7 | 1 lshw-d76afbaaf40e953243da92... | 1 mariadb-10.3.36 | 1 neard-0.18 | 1 netsurf-3.10 | 1 nodejs-16.17.1 | 1 numactl-2.0.14 | 1 olsr-0.9.8 | 1 openssh-9.0p1 | 1 procps-ng-3.3.17 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rtl8821au-4235b0ec7d7220a63... | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 sslh-1.22c | 1 tekui-1.12 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 usbguard-1.1.1 | 1 volk-2.5.2 | 1 wine-7.0 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/33d771d402add372fa78d91d09e19e1744f0a7c8 | mips64el | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/c6f1e0d42b9ef2b26ae89069af709e3b4f398f72 | microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/82b5c7b3f0f2b704eaaeda53fd157bcca998740b | microblaze | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/47e87bceaf6b74a01b3f41767a34bdc46c3140fc | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/88d8f8e061b99363998853fd90e53e91f01f4c12 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/aa92b469680e6b7f03d3dbf6e041a75e7096842b | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/078a2e33cea57a9354b3342c9c86450886c7bb5e | mips64el | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/8190c8f6f79c20d0763e71727fc6660e2389a9fb | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f47bc37ed9a386b7ed469a3d74c9a77046be8c43 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d0d931896bebbbaa8eb80659822d54a3cfdfb5ef | microblazeel | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/16036c1695d8d0face76c9f023447a3e2d958054 | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/a083f9503a8d364609d690b058b9e0c0450b0ddf | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c67f8a0a877524e108aedbce03dfd5f1c11afc98 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1d2f5ea7a40f7724f12a48ae4a1aebe82a738b90 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6d563719735eadfef0f03565d46f62658f6cda24 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9d5d7f9ccd2086d238b16baa6b5c8fa525a6d4fa | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6f5774c5eb3ec8dee354d4ed7de98f9e951e2c82 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c1530a6a3c6873b73f1dcdf8b79ad46e59b1f9a6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ee9cf727ef8029de46f73e4da15ae7dde520e918 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4ee63da4339714bba6775a0d85277f94c69e640e | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/122aa4495dab770ce5f76b9402906e703c937f7d | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/af62d5f0292118082e4571f48835d92e9829845d | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/87229dc740a137cc3d41ef603ce832ec68acedcb | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e6926f6a0aa07f8bc7f7ac587326cc92a8fb5902 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/14e3b942bde1ba6670493a9bc657cc3ee96e72dc | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/30c5827ac06bceb0d1abe2009a4e106cf349d82d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/46ce671d6c6c5361925392b651a2525972c10b23 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1cfbe1960af15feef9346ae4c6dac1a8f34b5a7a | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a11aef4f57989f11cc651370b1821bfe0e20eb2f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a295af5439dcb777353900f2676b04ccb1b39972 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dccec4d5f0e2ae5b797758140be220948a963893 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e300d0bdb8a636a247c9dbbe78d6527443bf4ca7 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/331f8dcbcf702828bb37d7da276f272a87357d8c | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bcb73e3bcf4beccdc6e7051e01d2fdc2699695ba | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9c195ba659b8b357e2b116526e4380d57b365e9c | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1cb15babf50a93d741af9118c450c59fb2ce3a3b | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/93f1966976915f298acbbbd8d0b39c93dcda756e | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2edd82ab1707172bc51d78c81e6088df5024f56 | s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d35c7e5cb2cdacd677f3a406be7029f026614ba2 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6baef6d4925b7d408bf17aa6072231390ce73e76 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d2bb3d33d7c00ba230ef0621b35f3a4f78da1cb1 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e9c127691cf82af06504592230a9731b909923fb | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4aacee5341235370d64192c9ffdefb510bff9099 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/705e6a64c79635b518941945b6681aeb44c46eb1 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9513acea48c1f26d83674a546ffb67d415ac39c8 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f831ca3322530d1553f549740df414fbbd3b64c7 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6d0ed7206f71fdeb6151559555432ea30118133b | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/aed565eabd8ab97d85f2990260a1fe867bcb7a84 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/85a04498d9aa8a2c48063c9b243dbd3365c404b1 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/df6487401f4b4d4f4e6d292480118f0dac41b46b | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ef57528692bed235f8d36cb84c46c77b9e4664e8 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a91182b332d961cdca57d3dc8eedf1de9a7cfd57 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/09fa739aad53f0f9c7fcbfec436f0d8f4d715266 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/261756ae7e7c3a8da1ad5b9b2d90def88aace671 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8e995503ca11a58303d7727a9f3e1e5892bcec47 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d2de4656673d1f69991dcd4d1cabe69ab03f6a22 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f0e018705be832eff59c4b9fcd567453f9211bcd | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/64eee73e9611bf1814a2fb240997e544172b7c50 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/98a6a8a4c9ba66ad8b7b1950f266418ef0840b16 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8968fbcecb8e848b27786360893b04d11640d7f6 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f2c388852262822429aa80a99428fdf767b33401 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a75669b8f8aec47333bcd91ee838b4db0a7fc57b | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/280a57d15dfa9c1da93dbfe34b7db1c376133690 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/78747d2db8b0b2a4a4d7da4144173a073e4afdb6 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/43e17b874053df59f1f6291d641f9efa891a7fb0 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/39177eadf9cdbcc72b3246fca15ae4ed6a0d8e76 | mips64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8cd95854f98b9e5cb428ba51beca6c909e4463fc | ORPH arm | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8f1964a2e2968337d8d766940506f88904104f1c | ORPH sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/8eb2a23d0ec82c7d9fc3b423c66bba268a4543cb | i686 | brltty | TIM | http://autobuild.buildroot.net/results/efc40d989552a507d122c1c36d38b0798e44af42 | sparc | brltty | TIM | http://autobuild.buildroot.net/results/cfdb2a8fa683275a7a13f1aae6dcfef61fb8f31e | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/a0879fbe10e70033729a5f231f8e83df16f5ef80 | arceb | brltty | TIM | http://autobuild.buildroot.net/results/393bb6806ead71c79a479b9d89e1bcc93d4788d8 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/c7cd908f20b6a1b067c383e99ace02753c47770a | s390x | brltty | TIM | http://autobuild.buildroot.net/results/f17f57fda0e2b4fdf47a7c60ad58b26392a0392a | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/2545d294a70ccb280975ac997deb0664a829a935 | microblaze | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/9147f892f7cd32df933135254ab76a4da9ac3d09 | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/7d62214d64f69fcb8d393dfa1e6c47d40c3a95d8 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4c6ba2b7d29ed4021377a9539eca53b0dd36de50 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd969d98dcb472ab0872457b26a27051b432d537 | ORPH sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6801a81ab45abb654f484817b254451b9558d46b | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/df1069c739cff57099f0b6c50ae97552bcb2f2e9 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fbc9a26c23fe7781ae8d296414eb65b300e7883a | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2df02911c6a9ce542ec42e8fef5f2100d5c738bb | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f7ded22869f638f40ac481d8b3487034cf0e941e | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6dc1345379c6051d00d244d065c7e9f836368dd2 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ea4a2fb566005f77e50b19cc08975ae8320116c8 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c7a658131829c4a01229b3fad0ad3f56921e8df | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bbabaf34a6dae76d9fdf9bd1c34046cd0a84c69a | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/83fa408f4fb54ba42556c8a9a0debafd3599c240 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/71b25990d72a64eff78752212cd871102537f40d | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7d254a5a69e85f9b60406f44aa5bacdd054a72c3 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ebe6e66dabcfb12c2305bc8252a8f30d239c1f52 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8c8a3266a68783a28e63382ab8814081f8d62d1d | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a878fb2910ba2a248edefd674766c8be370dd713 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/440f53d1b34cf4ef78a5cc4fcee668da47cfe99f | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f0bee5220d1de2c4801a89c7c32d8f1e738e4042 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8658063ebcd006a8dfbd0bedf31c828a9c2c4538 | sh4aeb | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/7e03c9a1f15aa0be276d50d61db541e9a68427b7 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/3b53cd611bbed9dcfaf5b5b8e645355fc6c2ec8a | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6c766225fac53369b49aadde71e1f482cf983d8 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5d1f799ad2c3d98716c9d248eac83c69b247eab4 | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/15e5b1cd2056302870351cb4f21daa86eaa6a7a0 | x86_64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7eb2833ee4d20a8e9abb14146ef0364107069915 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0669be1f629679a106abc8cf5baad4ad1a86653d | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6e2058a194e5ac77b90c989b1ddb30d4fae99d6b | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d6bb5314642503226ae262c0d33401a94308bea8 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/de052551ad7358846e10b83dd2a27835f7657a02 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/480d1ec63610edbd8f40630a10926f58702e033b | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/076e164d5b985ce5b1e1e6584718b057ba44cea7 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/25c4cb0b921d485388b228ffc7bedee130d01e76 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/20258df5abf4d41ebc62ce8c33e5de4b10d651f3 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2ad992b01d932be36539619173d973d703cd4f69 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b68f5ea5ed255b72de5017edc32136eb5601cd8 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5bd052dab21ca5898703e5d820fc5a010051950d | nios2 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c13b4b0c321967900f8463448833be18412bc250 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cc64c6336172682e88c049e6ca7e3826d18f6275 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/dab763c96f764a5e5d398529df4ddc0f2992d085 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1dfab53fe2bc7ade6fa5a77fc88ff153d860214b | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7ccf59f09efb9c25ce32ce0dbd61b94abe524ce8 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e482b8945eb937ec16d72d65fc1c136522319ad0 | sh4a | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a0623aaa662425231ba3805ddd65d77e90ed4458 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ab0747f75106d69bde0826dad4e20892a592536b | x86_64 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/057bb053ac6a51d8f925c6e6802b9c0a421719ef | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6a90da696f7da7eabbf7d7760bd4615861fad293 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3dd1ec54168ff36e30f619b12d08553c40641b95 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2024f7dad7b3f54243ae532680eb10b1fd326066 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4b45a2262732b26f64cfccc007b7fb8e2acf62f1 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/09ca853ae7b78c43a12814a483ef16f0b9a7c87d | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/325094a53ab2d7fe53f373337e5532c7ad9d7f2d | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2928094a901a75424ccc3395ab63f947959211b6 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a415d355046a24baff0fe942d8f597161a8e5e15 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/25e27098800541bb232715b24de46976a68153b8 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d15c3d5415818470820fd46edf1fb0be4043dd33 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4b549a61d739fe53453d31554dbc8b94cc62e350 | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/08d13af02df9832badb5b9a723f3d34a9c204c30 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/327650a90cf97544d2f2e5871e603148c78dcc29 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f936b3f272cc0b3e4e04229a1f0d45327472d94a | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/074d5a6e2f762498fceea2f2142f61f7a262f48b | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4b46d424cca097ab8ccbe92d3f1f19f4b03d6e87 | mips64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/93f65abc83be9ec2f872f6c5b9f9c82c2b3cfc83 | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f5d492998305eef42bb50841ba43a3dcb4ef8e5a | ORPH or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/43606a9b49b069e14d3ab24bfbba856e3db53043 | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ecde38f7c2ba05106c551594f3c208af7b5001be | arc | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/98b2be5b09d36a7e4b9d1f95c48b75c597a6903f | or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/62319c1aa3ab05c3ee346b6257374677463e2223 | ORPH s390x | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/3457636f3233ab76e2410a822fe418f430647494 | ORPH sparc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/8710f9d41aea0d4d52150d8c684c27f57af0b577 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/10930fca3df331a2d779e8d912ee98cb3adf88de | ORPH mips | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/d64bfc8bbeca9c3a3c39c3d55755656115df3245 | ORPH m68k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4831157dfc524673978e9b6a1f5ee0c7c86b822 | ORPH powerpc64le | efivar-38 | NOK | http://autobuild.buildroot.net/results/7fb33da8756fbae83979412dbad857a2f2c5745a | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/94262a58e17385a314821974ca2c4c56d6ebfd65 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/2ce7ba02bff63429d9b1bd68dfbb6c7a46ffe039 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/5a5d9ce6daa122618a754605104016ee0474c516 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/47090601f2d6da3bfaab8cf568091394f33e373c | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/16aa524b2eee7c7dafef8b4907d83d616e9e92c9 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e8445985ff2d4d98158471e705c3ffeba29b8275 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3fadde7a092302a98f914f5b267620a49c4b63ed | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5aa11c934a8024af4c49f855584e648b00ce6d40 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/21bd48e22c0a0b3f42a41c457df8755e2ac633f8 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/cc24782bcf146469bdd2c6ad284f45ee85314031 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/48cbc73f7377ee2ce222d2845778d1db489b9484 | ORPH arc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/45b027cff4ca87970eac5e232a75938c486110b6 | ORPH armeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/c0c5441a87473be1ac4c846890d71d7cfec3fe5b | ORPH s390x | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/8072df924f87fa0c989b4612ca38c1ccd259e8e9 | ORPH mips | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/f9d67d78b9dc6ddc0dcab3597a0553dbe6d4052b | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/854b9cb1d35ec9654a082c54ce55bd791ce13115 | ORPH powerpc | flite-2.2 | NOK | http://autobuild.buildroot.net/results/242d09acbf0d0cbe86ddd536f59151aa85047f7a | armeb | flite-2.2 | NOK | http://autobuild.buildroot.net/results/786997633f31999869b860a1bf82bad988bcfa3e | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/2d3b783b0b18a169c64e159435842f2daaaa38c1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/e7ad081098fb5fd33515d86d1eee74ae285cd163 | x86_64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/00c06413ed7b77ad90ff548946b8a3b44c35bbd6 | sh4 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1bb5855159d80efadd738215b4e2b097168d98f1 | mips | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0acdf45e89a02ecd9fe85618d62f0c73d6ce3ee7 | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b62e794841adfc49116e6827fb31227d1ee53a24 | aarch64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/9cd213ce2d36f797041c7b21044c2b2c223dd546 | mipsel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b088e9649d5d4c54678b9efbda49d45048cc15be | arceb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6f46ca23da2175f6cf4f1fad466418fa157baf4d | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/03c8d726ee27e49c7d8c917bde328d5623aa9dee | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4ccda309d4d720315f0ba91e36bd7d4530af494f | xtensa | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9c3e501c567d2062bb3f11347a35e34db1932ee3 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/691f2e37fe84d34d41cc5ccdd4205615b4b88800 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/946578880b61227d6e878a98698eb4b350f0ece0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5ffcfd92ac94c4a29dd42b0b786be09439e6618 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/900475bb58dee4d82a5a6951167083b68461782f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88af5266ac66ab356072a063021b5994138f8d97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/52f69f36e2032f99c03be80c065d2b9dd58d6ef5 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66cf7d339d2398578c90f14fe15fb34b7d6259a6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a28ccfb5d8c86de96e1b1d0e547ef3b2be711704 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ecc27e68baf1a8debe432cffb921bd2222743c9 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f07f6b9413595fba708f68592279716a7db90ab | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4b4ec598ca24149930863c07499af79a3ab2c79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f47860f8c30f19c3b1ef9f8ff6242c47ff17682e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/186f3a87c06ba2d94080cfddbbd03a6d6d3b51b6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a61eda1edb8988f92a25974120ddc500e953746 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8989a375365c0c6c0f43c1347dd79f62f782fbac | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a75786b22a495a6f33bf2cd476049f1be644600 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e669a2a16014bacdf8cfc0b4661455623eba1266 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f295ea5edfd660888e885a3bb69d2c5f656e7fc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/552f14324b4ee8357d786f37a0bd74b687e09961 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb7e4f47cebfd2be4804785720126919848c228 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/affd5713ed13fb589b4b86d1af8e9b00007e9634 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bba239aee3cc98e8b7627779b63bbb6386f5155 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4787ed65c06251d8c38cffa0efb9e394ffdfb123 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc7e72a6fd36c9638daadc876c7126a56ea1736 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2bc2d71dccd2216b2cdc16b1ba187880e0689eaf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfc4697e8c1b50217e3f79de9be6b945f6780191 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55bd4220677f0949eb44f919fc80a778d23073e7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b70dc200405304fd1e30f5e118c843f35b882d0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14de80715ad90335cfd8050c52a13b95ce1f0580 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c6c650e764ebb23821ac2e07a5a5a578a5dfbdd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c1ff0816c2ce75e84b6e453695d59dc8ce1e8ae | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d22830030c0c5760077dff4bb8e780f89537166 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f16073bbc5a90e8e8ac0d3b2211b66415b70e130 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a8e45d8212fcac92fece0e785350da4d489ae86 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4863b9928bbe1d481ba3f8f505f660c489a1487d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d617f367713d730038b74f2a6559b2260941964 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b36e7e652de51f456b79f6464f6381aa50ba38b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d01e82d37cf9d5ab6bafae5a1f3a11c42d7870c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15174f9f1cd7b687b25097b804e767916ac27833 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a26700fd586ac4e21de5677d4ddeb38f37db0415 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e9c8dfac3bb7598b4ce259239b1ad2d8cd6b763 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c2ce20864ecc3548382a4eb034498b48b892b6a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1305d777c1fe2cf04a3664a0011717141f2a2573 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2480f49fff76f1fbf7b3e18bf22f35593565297c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1aab1fe90fa290834f03b29fa19057d35415cdb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/435bd1863ce87162e2a7045791f6be68bb2271c8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c5e0d92883b8a4c3d48241fc38975ceb8af9cac | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efe503e720ce321574f1c71545b5251a4961a220 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c0be4168a6b58f47d0791970b83f8e4b180dbdb | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8bd37422a6c4f37df5d19190c7d8d3e49b1556b | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78868cce91304b6f7673b5b13b51558f42a5ece8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c574590dea2bfac143445b5bb563435a294cd15 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18ccad863ddb7b436be5f44e42a24c4caaea72e3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216cb83906ce1940a0ad02613c42b9cef9f9bbdb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/81b5ed81be62af07e26fbbb1602af031d98eb247 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7986f65d73d678f26e8c92e7e593b3a322e96079 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2608846534ba6248039bee386ddadeedd4f03cd2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d60bb62267b76909feff42c92f9cabd0598fcc62 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/790c41a7015cc420dc4393456df7d93fda047efd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b02b86cfe28b3ca0db016b4bac690d4b0a505065 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a417b920ca7e76eefaa55a97e501c64e3933069 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/895df69366faa4d4f9f3a85b08555ee99f979423 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99047866cdc2ff5a2207d7a4358021ea2a0f468b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5a9f1b86db3f54235a4cea315f8cf8d33e49f96 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8100ed5f38990f19e7878c8f196e380f5c90b70 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a8137f5f44519ae54e7f08f87b4cb2ae7062402 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efe3fbafc4f376f8f3bd23013dea8321e8c91809 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72e85a7dde9e9520291f4b90100611a8d7b207e9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/789d13bf60aab6d3d157ff7075c7eca13fd9835b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b30540296151d91f6b371acd675b8583e85de79b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce4e7f1bcc0fa0ee20e55485fd95def43d2f3abf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2dad048942b8b2ce34b9cad7c9dc422c882830e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b910063e4fc01451a9f11eee333f9899ada7a88a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/631e41a892d3fba0bf61ecfeed0866e3aa7559f4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8e14138df0dd3c5a01d7435a35936a1b4b83ddf | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28b87000e4c2ce157319ebbccfaa887f3d9f2197 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f91f5d0278d3c5163d1a9ad04fba9f36ad9e8d83 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f01e70f6ca2306a6717604dec0256849cebf9b76 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cce8a4e7ea76a9359da5d7dee0369c9a552357c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/64ccd27b243efed942ca5e2da25c47fe8cc1b662 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d34cf0b6fe3907548b04f6832bd1bc16b92b6824 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65bf9352f1aed1fa9209434d2747c2ea6acc9ea7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0065e53ca8527a1baf9adffbf1a9b034aeb3947 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95f280bf4822d488650163c4e508b2252b8b050f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/665cef8731e0366a908b0ee2e417762ed6aed905 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30a0810784794be028024655ebc8b8260ff40828 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc00974a94dec96f1eede245fac5451594a8c64e | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/834d83dd3b59e11a40c9948279af8ada46598503 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/addf9ae9f90da5d3e5e1c08b7bf27bb147c31ed1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e9fb859a794a36b7ecca0f73d9d19044d8aff46 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc4ab010e5997b5d11de2c1d16141b81974c670d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5c02a3cf462b8e690d96e3dc40c486d9049d6ee | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae0ad877fa16ac78bf5f6831a1ebd2ca0c8a1e7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9df932805ab630af570aa6bdc19b0052ff789c9 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63deb3e9037e715fcfb8a66119a3be627d154ed2 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb8e44e13c8eb80459ce27b35e0fe023d7078a03 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c54ea602ec6529ebbb9de64b39138f0d2ab7d07 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cf0574ebf50040488466ffe4e7030a10fd26f0e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82ead78c47abbb1cafa36ed9bb8afdb9c9731f0d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1a13f734855ab40b6183b7a9f0fa16f3c7e1599 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33bda0dd4dc8a98e67fcc433d4d36ce12f2ef343 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0af4b9aecaf4ad19eb0be6c531c7f9c883adc417 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1090443c507cab9bef533d807dae3888916c545f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09dc2994294b1d981206790d41637a4a5dab621e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aa35cc7c11de9027ade28c8b7e34a3aef711357 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13ca47bf4d70df260c11ee9593ded203490f46ea | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bbce549454293a5724ec9412ae801a8a76e280d9 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4fd18c8f1c4d9f523e08569638f2a1aaee0b3e0e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2e0b900c39ffc36cef536ebd76431f9026ec5f3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5886296a0ea81592ebc3e548ce78ee279ca1184 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29125e66aeda8d11186211c634d2a03933f27746 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1542c2e99154702745fb89853c2e654c0d45a23b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1698e11220abf9546c496fa609f03faeb75f41c1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/348a4c414d8482079232fa4d2af56164f032676f | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0094526f16be2bc56fcd90efdf0ec127607be6d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a24081b68af4d90c93527b8700bbc07a32df19d9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5441dfb60250509671f07d50aee45757ca479075 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/daf6cec4e531a2ab1b9ec9584a8f9dda08ccd5dc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8639637dc0c92bc9150fe96ab73f57f88f7f315 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c87349cd47747c2fea76e4f829d959bb3686f92 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1783576b75eca525eec28337a3764323cf3bdc84 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/029b81a025515ec0fd8593217eab5c30cc8a1418 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d61a6a532172d1686a385ef98a0165c0438212af | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c2d5eab422dcc464c23942be6bbd01e273fc705 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d321bb0a2888f8bd371f8f9fbd25ddcb7f41af5e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68ffd836216b5a075be4e4daad44fa7aaf558c84 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96046aeaee44c786f8cfe1ea96beaaf1e56d2992 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/692c6d2f4e848674715d32b4f4c9f9fd9a95a70a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56f50e005fa61fc5c72020febcd174d49737dcb8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e64b4126d25f78a693de35da8ef9ff514f4d79a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a47635da259e94d671cb09c91dbe6c186e76d7a5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cb839d81acf484ffdaab5d6bf6cc385affb4ff0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d285374b22b437206d4197cffb1f626867ede96e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90ca5936d188aa47d2ad887d8c99ecf9db4c866e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8db33b97e915a6516ecda7cda9c85c0cc64f779 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/06ba33b806a08dcc1106c7c8b0b79b540aab6e2c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afe23afe44df97fd3e180dcda367e59c1c71ca47 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d7c8c0255bdd7f1c113cbb92dccaeec0e961597 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80d6067e7b1f01cbbf2243b866837a4c9ca39cc8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c52260564da3182fcd45e00dbe8f27fa29f4c42 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74703b06993022b9af568dc9f2b41536e4852ecc | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d03f67334d3deac593510f432a6f4173538657f9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8cf32618b89764317887b7a6696db3b44d98005 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c80dfa0b17af620150bde305bd8ca996164ea6b7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a495bc54db19f6cb9efc0a60153a64cb69c69550 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/805c24cbdfc1381fb196816123ca932837ede238 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26c06c477aecd1f4cccbe43679ef8b26ead3e6cc | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3f2913e080e71ac86f03c0621ce5cdc2494db3f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/589647a33dba41904d4180c9af347092bc6d4104 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e43b0c1f7e134f5dc1f02e4614e566e1f15ab1d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3760a3f32b677feed08b475db3e8331d3974008 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e2c03a40148e88621dd785dc9bcb2b8ab7e642e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b09e25b9f6d6073a134eed29ae219d0890e1dfe3 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68a0492451544a59d04763496f7c74cbb9cc2bd9 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9b5b9e9f0aa76e703c7171bd3b9a30c57a65de1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36d90fd29e9c47db25493c06a3adb371461b940a | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/928993285f67c883f54ad35237a725464dd8e25e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ec10be3b1dfb831c4e4cd6b641f81554d7446f8 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97a6b40aca6c1c42360d661bb752989df8d23496 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56fb651fe09cc78458227508631fa92e8c0edb80 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/127fdefa1aa58217013c305105e23981255e6dca | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4725919c17dffb2d26b5b70b5145699966a2ad54 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85058058f9ea743d724ec44cc5e5cfafb1d7970b | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/301f4119334e227336f0d407c0941ff189eaede4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ba740b01358e570ddd83c5e4777beb57e507e81 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce17f98f0c3f0696e296e7f2e1c315ed6ea48102 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67e8839e524195ee14f22a36a5f40fee54ad0fed | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/590e68e6796685830829ff91a4ceb3e3d276953d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5467f8b0feb3571b1761913dcfa3670a4a708df | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bce50b2b10097d3d00b698314c198200e7fae05f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/247946af28501d77a6c132483bc4539a83048d50 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d32fcea904abffd5194e4a60450be5ca535cf9a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c08783851952206b437529801f21c4ca8e89a92 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58b15d41fdd3a5cc4982b0b202175103b7210c6f | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/118832aa57a8e3eec2f7c22bce5c6e4becfe00c2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ea28684c9bd9bbaaeb53aceca105bc687cc32a3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c688c88782fcbd93a1135785b486b3daf22f34d4 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95577d270c1366d7cd68c999a2f5aed5e812374d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/981b762fcc961b2019984f03db8a3befa5be0bd0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/832757551d55f6d73574b4969c6b6c0f1761c8ff | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f502f27b91dd3a8e4967305ea704e0a76c925f87 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e424f9d5e9c69c645086ef9915c6d626ce76174d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/35f5682e96a1ff3febafa4ca098269254361bf2d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12a399d2d39f9ce1cec3cb52e0b9645a09b368b6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f1d8411c315474c17ae290c3ef9f67c5dd349f5 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c386b01cb5657eb28127d2273bf6f7d3c6e7faf | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c14ecf525f93b6bf18207bbfdb1e94f79a981760 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/195c23d952d4f59de723386213be811eb733c4e2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2f7792e861d349c51a4ed314034a542aa4a614c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b9e9ec2cceec3db7ae24123c29f075033325f16 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3b0b0cf1ac319c8ddca97b96249651feaf2e3bf | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e40ad503dde1264114442b1c57a0703a908f9e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d111368e1b5a58be095db5321c4c696cd9eed864 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e336e662442e7526c1b2a4bad54a50248db690e7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4d8dd0211972ab11b887f895aafd73a35b936c4 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea9bae5d05ce4a31f18388980a0a016b4e2f21bb | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edcd3a7e03f3bb63aadf29070616633ae0eaad59 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/830856ae5286ce793f085eb97ce3b6ef3cd3c62e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d00d73466fa05f1dd3eb7da990f62b65830b02a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf4f2cdb0eba9f32cd3875f6736596f53a0f887e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2cf5b1f6ac510dcae7b95ef23be1745e2e1cd44 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/740e458804a33749d68b78be6b1918ac35306ecb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/801e77d4c76bf18f51b1c2d6edfc6ddcc31ae7fd | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b69af8db0700c31cc3de440db3ea613b7998786b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/683db75fb70ed480bab61754ad3fe364a90aed87 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c9db593e4344e4117ba80d562469a93244fe04b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/214fc96a516a415685176ece0e63e029c902ba1f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f31f963b279bb42226869fda8b4b3bb106785a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f9ab2961b315cf48fb8c9b87fa99731e2702a5e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7de7235d2a7dd1b5d67373e5902cab8d6b93207 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50568d030d6354f4c130785b6d3a0e5ae98c8f1f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cbaa4000c529cd909448e7d0b6a681bc13c97c0 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf8150e302745f5ca1710f53e9dceec6a4e97b75 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80715a3ec26ac3cea7d49a081d7457e69067b4da | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b03843f57f2d7d5388cdc23e12e8c14d8af6301 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e9233a79b06de7311f48fd6918a40466b58dc92 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ac27121bd4e8c343f72360ca6b5abb89f9e9276 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48480fa206eb9574f0b7760928bdc33e5052f6b0 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c7f5576a47e15352d15a20369c38c4392ade954 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ffe14686d85cb746a3deab279319c31207a70ce | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fbad6a58691427f3fb7856f2fb1f3e43f34d985 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72ec9cbbc8288b26d4ad771e7c38656ef49f0f7c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d9e5088f54936f04a270a4aba6c0ffd86bae9d8 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98933660f7f0cc43a2dc19346fca6d7733085e5e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/814cd98fea0cc361165cdf916329d91c7086180c | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa985cbbb0d841f15d83937b593884c45dcd12c8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3bc5838e97909414fb735eedf6b0d826212a06ec | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a91823b650d6b1078eb7b3711bbe9939163f4c4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2f4a7837ba38542eb019cb353bab55e9846dd2c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58f043b4c1c67731469af5c3f7bf8f77c3d99c5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4a2ae71da6caed80b15578dd065a5b122af8db4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a70d8d19be69dd3e30421cda6f4a5a7b47482451 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9370b0e954d1b075f9f711d09752204f63d30501 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0390d178166af6553ffca5cf7ee8d9a4d41c7922 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/743481099de202fd011cf6ef93882fcbb40de2f0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27eb48f3efbe418dbdbcc6d1176fdd95dc9b6f47 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69b181730b7128b6bc594653c2edd54c92e0bba0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/124c7058282eff97413a52151cb33b3a7ab1533b | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5de6900e0bed5dffccb379c51066621bd4638294 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7813c501dbcc759d1cec81052ba81f9c3ea98be | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68528b02434df7c24f22c9c130d62062e6b3ac0e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34f62aff693cbd496b4621e7b53dd9cec91b6f32 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36d08e2c4e84b9e53ceb786396334a9d24ab9415 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a562904d7ccf3f8c9f9d93cea6660a2a94842a19 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/956b0116f0984e9a7eeeb0c84dfbdfdb49396cb4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/707d8be35162cb3fa2b74a3a1ba8be607a9f9d63 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9313a17c965bab88eba741cb9d04271f959360e5 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4799e3056a6df82af3e229171f12b6ac768d82 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b350683de515b4b664d6db0a6f4128a63757dd12 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faea1a09f1a270e92069a3e61cb20198010e85d7 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cc73409feebae5f6bc1aa0aeebe4e32021e07ea | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a28dbd84c454dba6be1ce642cc11e97db49536e0 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8f71b3855254ad08e0ca3e282b0e53b61caf819 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/404053ca46ad750e061ad2c987601c10ec83e983 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e131a63d299bf8bc89d7044faed4c317592403f8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29a6c6599020b8696889cab87ca7280a9f96532c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e41ff352fc5cdbee07d839b986641f0024a51778 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dad1b7746e0681bec7f9cd56d5a037a50977c459 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8625559d4a0468dfe88054be638b543a2c69d546 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02957234ad46aeb1a236b17df15627ebb92af2e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e28d94113add5c6458bdc8a0a1187a90340ed9af | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd3f8ab88b19b0804552aea040ca1457e780ef28 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7dc74e94bc88f61ef171939b639323c86aa95b4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de687e6aae58a9abb2a58d3a7fe770eb201e7da8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d81f828370f6585c11993c564e355118447351c7 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd6cdffa2ac15f68fc44ebe07638f81ff6803705 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/413e58755f6d90f2220bd81469a9a2c8902d2af6 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/017bf741160e520733b77095bbc1656d2a133462 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0be1a32ec9bfcc174797be332d80f7138fcac3a3 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e69fe7fa963d6ffe52429167277e3a8919c0870 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6ab328a61afe514f2eb73cc3c970f424e9aa338 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27d336a6d24e172b5915a5031ecde1af26f88f0f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97630c91e3c9aa2f7a094de3a6b0d794b77126bf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6d8fa6c1dadd8fbba984552648aabd695844e22 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91adc1a4fa1b27445747e7ee428c8073f5a1c176 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61bf941dee47b8d5504683b6178728f99a9f73c9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6aa4575fcdf400b5a38e883fc8f05442d9a041a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2eaa12413b5fe361383d99e906709d4aa7a1e0da | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82e846bc8ad4b71a2260103b9e9d3322c9f3d5a0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29143bcd61859b14dea5686a65d4ea6f63ae8936 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80da72a6139f5e743927301a1dad6599d227db12 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2da9608d7ea86875c813cb3ef67921f2ff008fcd | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91e232b0c4b376f8e976976886521dff3febd455 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12a9b2693b79c3470faa3dabc11ea1eafbb5f058 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0ce7cb066bedcd3e9ee8a51ca0716c8dd6903ac | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f43a12759cdc14db24a8e8892ad65c16cd680766 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016abe55dab2a7dcb36ccbc91ea9177c87eeec5b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5d893217782ddfd689821cd912f449d7ee95cfd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/511aef5c4499272fbc858bb383de963c72708b26 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90fed584e6ad23471a38f2ec034bd9cb1e9dc3e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3b3c88113cd2e0c916de2694855f0f1b67e7cc9 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db262d8cf044957e9f2836c8370d5704b80af73f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71e57b701d170ba151c06af72feefd73dfbd513 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65a41e92c01327bb18d80ef61ae7e70c7fa4a0ca | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d016d9d1168596fb8506a309bfda9d3861e08bbd | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/218c59b5963f16cd87ee3e84e30a3e4c627f132d | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ff05806d960b6266d66239f3dc37daa84adcf35 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae1e2bb335ffd05210d3e770fd13b33f98376785 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8cc4c3ced75bfa336a1b31dca804aae5fdd3a85 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8d612357fc51b7530dff16735fd4b2134a9024d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/742fadd4b813346911d5a234d5170d33776ac05e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d197c450053a868208abbd7adb0f31b6d1c2b1b5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e89e5dbb2c42a5970abfec4c68fa5e72a13afd10 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18fb21817e5fc8e4de5c05bbf50b29acd4bf3848 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d493cbaf9b3b3a8d0153aa1c057c7e0c3b41c54 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7640549f5c24633fe1c06d9e0548bbf4a616cc2d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4559fc7821e418503d40de8707a59a2c5cb3366d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d8f9de61c831e47e06bf43bf648cd3886d4f6f8 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26f1fba17068681b11960e4f558c1612b244fa53 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/651dd4f417889409c927f3636363b77337949587 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76760462839ca9fc946bf24fbf838af6520700c2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6065f04afc8e76708c80e9556bbd49631a6b681 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91927aaf429bc4db4468949bc3697107032e8360 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71c253d9155bc9a07bf4d46a8b2e282f184a3f23 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/162f0b662fb90239a39b1169e9ad002ee950907a | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9c0d7a86d8c5a48083a7427f605a2d02414ce693 | ORPH or1k | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/ae31c80bdfc42b8939ad8d0693a866209d048ec5 | aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/09f14b8af5e1a911f270b90403d1a331df1aea71 | mipsel | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/fc5be395d653272a79e2bfc736ab386edda5a5b2 | sh4aeb | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/8ecd65e3804c121b106f3b60f9c2cde4ed4213be | sparc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/0833b42f2a3cbda96de49169bfd6a2901f7cc715 | sh4 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/324b9f948256def60c5d2a3a124f8fc69fc79edd | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d6dba84dc392b03c9325af0ace68b171603a305e | aarch64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b7addca60d0fcb6e73bf7f840d6a6290f38739f7 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/fc0223529c1007e09211938e9af6c5151ab0b81f | ORPH sparc | hans-1.0 | NOK | http://autobuild.buildroot.net/results/942caeb90486cb634cc6d71cfe08e98dbbd8229d | ORPH microblaze | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/de591f7738b5b72c8f882cb1634aaf463d48e9eb | nios2 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/7423eccf35618a096735ee446ca0c41d6cd84571 | mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1fe7ad524fa1bf98fca69ed79efcd3d566331745 | ORPH sparc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/67b9f433b72991268e89bc6a449ca1d294b94189 | riscv32 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/ed009a84cd192ea8d5a7c6c4ce75dfe9ff94005a | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/77edfd2bad36e88c7d532e11094ea4bdb9bf0554 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea4c8a0d40ed8489817dbf2e3ff7abc909bc1531 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4ef0dd691e72a6060b5c58a1904fa2e63928505d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0d3b37d25837dbc2527b403676cf9e9bd503ae53 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1446fac68520eb7680d2585eb3a8132e8b8f0a45 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9c3963f2546ea274d0b75d47b93fa4f08a056592 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fd754273b3b401a6dba0ac99c5157d086e98aba9 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/686ad4c025763392897e26af16304e5894dba503 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4906b891f956d2370b96e8659e60a48196799b83 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/86001c1c8c28d761d9ec218914f71fa91916a7d1 | microblaze | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/aa191b98bd886305d0d2bf3f7d5effc8dbf4069a | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/866e0a490af143970ec4424249e17e8856d0a797 | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c6bf26d0ea46da84b683ab519c4c1ac6fb7cdbee | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c5da7ff4dbe1f2d970cd29c4782ee20d8cc2dc24 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/08c43d57dd91e292c9828a8b504501575c10352c | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/45cdaad1ac490e7108f83ab24798737b25898520 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f1cd4b2383f3c68f107ff3fb8fdb234ab8a7de6 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f953f82ee8c04617abf8048325e0a7c4709da20 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb246f44cb14968db9f375dcf5d63ca0e2598d52 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f6ac9f06de1f4ced978d0fac0ea38fbaf6f9df9f | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4145323f3d7b70bcc5623bdee7f5c2647f12a9e0 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6f7f84e9844f70e069fabb0b5f05e31a2243b5e5 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b96fbc4a901d78777538ad48b92e413201eda99b | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6ccd6e43b955f6bfe1dfee8d0ea8d8896164d9a1 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9ec33e94b5bb242d7daea6823cd9a77036044b7d | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5dea92f82e1a6300b6976fa695205b40b1253398 | mips | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/9095d277ad323ed98b56d7efc9fac146b0b140e5 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/44d3f8b1e4ecfe36879b3ab990e63882b7fe9d0e | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/157b5603e4d35c6a0ad67cd7376e7e6ad907baf9 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/efccc21980cb37abde5a387c367f46092214665a | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f675b3930e8d3dc3d5d7f3b26b1769c40d0914c4 | i486 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/70b52a7607461a9dbd741e9df12d27149d60ef50 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc7e980e48b7359433ef0ab75005b217dbc00339 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f3f6f47072d1b7ebeaa559fbe9ea1167b09b5fb2 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e30e90b01e1b9202078f2e30ddf7159a01c1a0fa | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e919e670bc6e85166cc084450cefb4f759ded515 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fa42e562fda1a3a67cd54ae84e7832c76de08fb0 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/23e73d985f613c4e5181ee1f1cb774b5f237de73 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/af71d081ecefce8dc35c2c41930539c6ca8fbd9e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9e6c71fd5c521604d2b3d7627d4e3d39af354362 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd90ea3f444f9049fc7a494f448a069217601413 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/69b7b5c7888d297bb8b1b3a490ab4a303ba02302 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/53bf2b51ed6d07d3fca296dcca2c36dd38bb410b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4bbb0768666036bb7b17e795080cba6a526f227d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aec48c2aa80e6e8d468cbf0be82696a06ac8342 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/efc72ce2ce6e06f8c11a71938707a4fd4d347c93 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/201a457f67453fc8b24f1e2b976727a82b16f494 | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/59adab99f193e6472de6638c151a7a498d2631cc | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/420fcd99ee52ed17654d10b7c41139cece73da80 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9dd11338502d6f5e286ddd2c34d19df8318265d5 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae976d444cfaba70c170076ae4307f0c949407cf | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3dc9ae93019fc35866ad5fcfbae41f7f99853764 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7fdb099da98a876dd4847f8a267f90f6ec1a541f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4ca5118fb5fffbe344ee188553bc9c9e1d7db935 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30a4718159ba3d6966998aefd1067592a8b0c37a | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7e587bdc4cead59551bbf109f30f659b5b5bbe4d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/982b610f1f22a9d924d8bae4bfd6b104ba3adce1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/559e746c19667c3c72a444886c87fe68504f7c62 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a672321c74f197ca76c47667de53417265b11418 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/723f1c3e20cdc9d0132cefb4e10586cbb1a6bb85 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/91a706bfea50783256299543398c0b191f56e320 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/328f814726bbf904b8eac1758f681221430152bd | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f2214db252433b722719223f3893be3f3a6bbad9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/769f0cce9bc2acd7850778f0b1e607b93cbd0598 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/79db83759e2cdd47f84c41ac05e429e1003e3d4e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a364a91481ef42068470ecf34f6ddf4cfd1c460d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bfc3284e44c875508048a23791d653adc2aafc72 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/29181a1a01435053a8d198f8756ba53259bf53e7 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/46607874864faa0c86cc7861825919e3288a7fa2 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/545d7029f6d0edbac596b69b48995facdec060be | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aa1dcf3a4c8ca01939340de7aa2e356c78f41987 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/11909b0d26e32a0cb4895562194ceb023e320120 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e0725040008f94f28129c11e55ed9657fe1813c9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3085143c5817047cce7b7142fbe62d8f96d03e01 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/302e26dd3554502d88f9c71afed9c24a16fe03c4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3ad95d402b4f3b6eb04e3696dae4c2703ebe7b4b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/14c3e6554d2f9361f2b5361c3744d1b3969e378f | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ace6aee97cc190e5bdb4a0c61ba5c1b1119f36f0 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/14e7f2caec142c4017ad2ff38ea159cbece8d6b6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3871e11dcc26b18e6160c3278691a832220b472b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f934dedaefef0c16534acfe834b6b78fe0419b01 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/2274f3c5fa8b7f633b70f37052876bbf1ab27df8 | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9cb2bc38976705efd9c9b5c5eedbf7fbe7c85ad8 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c07a3897c3597ed70b6b9b3c6243e65dac573436 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e1789dda3c95e8ce7fa5400c9a08ce11abd5afdd | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0f6b06dade601cdbdebd9f6ff073ae248731967b | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ce3c1ae248c915faa2befb0cfef8dc2e421f0609 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/cee218ac8305e5b6c45230bc42c26fa0a198eb26 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c74c0fc845d43d4a52a2f0b23a4cad4d4cdc53f | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/8bbfa605d9258db6eebaefd61015d1c0990a04fd | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6e8f56c4dd7b32ea4d4f36398f709ff93a5192ca | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/74b878513ccee451987e2ad9b7a3341902eed0aa | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/474a834f3fa1b315d3920a259308b923e39a7018 | armeb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/ce451042e581f1641ba006045406297bef211dce | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/19d06325af16086897266415f23233d12233c3f0 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0aea0475ca9da95eb531bf4044ad965d1e9d8c6b | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f0d3f236fc4f45157006046e15fc9c633e4f79a | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29fc1fb722d10e4f8795c02dbe778ce6305c3653 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d7fdef5152c2c0ec341b6f4e4fd1d3357b96d44 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8db74a250bdd797a5f117342b817504a8b0ccdb8 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/09963436566fd825528246307eb5c45520e7503d | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53353a844905df5f781a8e01dc28a3c09e69ac6c | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/31541b4a4cb02c0e0ca598f48d6deb926f2b3bad | ORPH xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/97dc16b25fa6a37d05f00960a4616b48f40e37f0 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4f0986ebd0a0c5d9cd8ec51cd153be27989b8996 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/61c2933bfee5baff524b0f13f01a734380d2b147 | riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2fc7c885e7752a88b410169e345db5de0d239d74 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ee7b57c37d6a2ab859f35f28d314aee638ffb392 | mips64el | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/8193b853e37e09280ae182e0ecdb1b9a660f6c9b | ORPH mips64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/8e9678e983b4540c0c8ad00046a85ea3de70fc07 | ORPH mipsel | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/85bf24a5381289878277ce6a6224a4b6859f729c | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/9148892239fe49fd7805b3afea0514c4d719d968 | microblaze | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/5170076f04b40770bcc471a82952e2dcf00e9695 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a87907a5e55c5a52d7dc88338271db41ffa11728 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/bf063e08610a327f59917079dfb504a3277affd8 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/9f89bc5a1bf5ba12a0a053a6f534f032f022d4ce | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/834eb85a3cd1eb9bc34cf8300643082d89256fce | riscv32 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f5071fd40e9aaed1b7f8a942be546e01dee96612 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e98e888d4b81909007860645970096bb182694e9 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/aba8617710bf592605c0eef84262b62f48d5e2dc | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f018e5278aa265e8d1c1214928a2c5ef841e81f3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/380e1b30edddea22b2bbacfd9c043c1bf5ca5d58 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5e4175f757a3671b22a6f24f8c8bd0aa55176690 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/96f93af644fecce31325a00cec1a780b57c09839 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ed32065339dc8ac8820f42df3a7d0ca863183a19 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4d69d1505259f70602a6dd56f96d0a414853a698 | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/89631cb4c458d38251ab5b6726b7bb13ce1667f2 | microblazeel | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/d0be375c992e84d6ab913e07edc3cd6f1a5c4d87 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/cd5e657a900b6bb17f7e101dbbc861d13ab92f39 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a13ee5d7f051b1550b702f9e756a545403cbb0d0 | x86_64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e96d092c8b3a4fc0e09f24169f526f5fee55f7d7 | i686 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e17a65bd445df9a9b84fee8e5d815acccf947b7e | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/9ccd7b2df4b5c17917713561d31c05c443d134a5 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d8b9e88c300ae6df9c3c7e523f38af0de44a4961 | m68k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d23642433e20f6e3d6bbffd6c92e29ba67e1aa84 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/65205130fe67635134a7c4d05ff20d220f2e3052 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ce8811063b425e2c0b6d8149df51201dcca59c15 | x86_64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/1aec101a7b3020eecda2fbf335bb6e407217755f | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d54c7551ff95d60c9e8c7ff80d8528cccf87a492 | armeb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/465acb0a276c8c46f1f570eabc284ba585818d0a | ORPH mips64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/9d4c63cc8916c93c87c3ad4ae910fb66258ce64d | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/5d4a306cf31698e833bb8f5f0b407e87fe62af32 | ORPH s390x | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/f4ea02e5e520f7cd5229386ca8a9fde25a68bc1b | ORPH s390x | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3fadba08f3813552faded0497b586d81acdd0247 | ORPH arceb | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c32667719a928ec94ba2c1121987692f616ec73c | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/18d5c45b3266149d6dacd3bf6a86d5a4c7e4194e | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/070810e79c4a182be06673ead833532c585a92f6 | ORPH arc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/57b44ce9f11a809c253171ed401422e7bc1fd921 | mips64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/af6e78b628b76f1f0456305a83f48de50b02dd94 | or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/0160a895771f7501667ba1acf3700556daef8681 | arceb | lshw-d76afbaaf40e953243da92... | NOK | http://autobuild.buildroot.net/results/ff8638819ef3df5911c7555d039954a9f9f5fa42 | ORPH microblaze | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/afe5006bce0b467f21ad72e131543ff68212240e | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fff8495fdd2e5ff66348185e889a24b7a3e60034 | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fcbf61ac312839f01555054df5f8a4426b821dc0 | ORPH m68k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8e9974f96a6d8de62be13c018e6b037df0d746b5 | ORPH sparc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/ded8602221c38b51960988740f78ec58879921e1 | ORPH arceb | musepack-r475 | NOK | http://autobuild.buildroot.net/results/1b029b9165a33a6eb2f072b6e2f7375cc24bc841 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/e72c38a7de649c7e2639cfc7476a0a283dc3372a | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/c3b0d48fd0a49949f1e7c17e8b4582f06217fbd1 | m68k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/22353483c06e5efaf9da8b1ddd2a4000ce6fcac3 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/1296f37e8f693e2fcd32766d5f8b8d69a6dd7931 | mips64 | neard-0.18 | NOK | http://autobuild.buildroot.net/results/f8944800b886d09c8398e55add0235642e4dce97 | mips64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/670b184b84a01b07e9092a71d644186516ab97bf | arm | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63 | sh4 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/225525fb80b8fda1547ba9e4fe2e33e81f62114c | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/0d2b1d9ecfd99327324d1300ee3f23c6a45dbae1 | ORPH or1k | numactl-2.0.14 | NOK | http://autobuild.buildroot.net/results/73dc2ec714f3e97614f84f4d040f6a8404664e61 | powerpc | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/86605b2c026bad66dde75d6273040388facd95b7 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/be8ca7ee002d4495514d769524f0b59beb457853 | ORPH microblaze | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/094afb87ef38366fd7bd96225037700ed3b8c194 | ORPH sparc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/37a7d276777a37e38ae201b5e33d070c6126c01c | ORPH aarch64_be | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/b0549df6462dc050355be3a4f615b14a1e89a4ab | ORPH arm | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/ab8fc76bb03b83222916db88bf4dede470e43cb0 | ORPH arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/a51aa6abe34809f516b24d8727b64aa41155c754 | sh4a | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/2f33160839ba8de770156037d10c1bb4c8276e2a | sparc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/303c667c0e8038af6b9dbc8fb6caaf25a8f48065 | m68k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/fe785de902219b36f1469f243b3a9c9ff44baf29 | sh4 | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/7d028d6b50c35462b6c9b6031d27c80794c696bb | or1k | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/e5403483e5cd7cec55d7d56e57130a40303ec1b0 | riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/94d4f2e3ddcd1f94d312a212f63061e01d8f62a1 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/a14abb7233ed21b202126de3b2795a0b4030b1e7 | ORPH mips | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/a459c0c18991434cc5664c5e82eff4843d25546f | ORPH or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3aa1c14c50275f7a4413fab3df0e18de67f87673 | ORPH powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/66982096d07af327f6c49470c727ee3aa2f36c56 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3c7fbabb35d4d17169821bbc3c7dd850cc240be1 | ORPH riscv64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/1e5e50fe0a2af98995cb304ef802cfbbf8918500 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/5ebe6583a6c0203b21c848dddf63da07e6ab8699 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/908bfaee6ef517a4d92591b12466cc03b9d69432 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f15843581c276b6f34a59865b56707f746c899ba | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9322debca099e143054f7a0e19ac61d174ed64c0 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0f75673fe969a6fc6eccd46756a797a623b55271 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/95c39b42f6a56017270a4e2e7a4439045ad6dfb5 | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d6d1133257d0714991ee8a42d7cfdd5f99a7a5c5 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4b8b40fb24b7f45f14d3635f14920dfd77b27731 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/459df0d5dcb3ce09ced593e872ef0655cd2ca7f5 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f4eb2e3c023003e2bd2ab09bde295f55c2835bbb | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/82703cc5d66b2cf9f6b73c1877078c64a919db90 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0f35760c383bddf2b865102bbe1dd547008c8f00 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a95d1f533c314c55587d49a313503b50c1d09828 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d0ac3758308b7f9cfd2193d67489788ea9acfc7d | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3a64fb0ad5c4098b023af10c45eb93a90e606707 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d46fe6d6b8038cb583323c7a22fd17a89ca8a88e | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0019bd3c5e72663415ab9b3b006a1ddc0c7d6bee | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c2c59c3b3398e543b472861f5d5befae832be3b1 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/599ae18c14efdcf4b0b7cea17d6020f85cbfd6fa | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/683223c064b87db43c2fcaa720c76b01a043f40b | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d0a423fd07fb9d96be8b60598aab931ae708346e | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6722e216d7f4be13f4136a2950ffa8c5929e1b37 | ORPH armeb | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/d17eb5f567115d5c1a6c871384922acb3a0cf6f2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae225f12df15f656fc2c924ac4989ddd7e9f79b5 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3fdcfde720220410759c4b7c23877eb1e3b0364f | sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01aa822b523f6be32e387b14cd10bbceeb00f0e6 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e6b79ad2b24c0b5bf3536f74a786272c99d2b0d0 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/b84a746612d10b2fec966b7b137bcc0ac5c6828d | microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/3f91fda936aea5f5fa048a4728cfa972e9063649 | aarch64_be | tekui-1.12 | NOK | http://autobuild.buildroot.net/results/c6cd0d488581013a8b215b0ee2fd8f549a868d4b | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/520e50cd5b22875514e48e1b3e7bc87f20dfe760 | ORPH microblazeel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/0708e82daa19a9d0b8f517e5b61f6908bc9039c3 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/1480acf997b6c567d4044f8c29b981195be14019 | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/bbe9e46d69b2c37913dbd37191780874d8fe7e06 | x86_64 | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9 | mips64el | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640 | m68k | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/a7498dc8cc26db3bfc1a2629a9d247fe177ed5a3 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/589b16eca9ea2b15a3feda3b078bd428b0c54f44 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/87ec35952ab6d0df53d0d8aadd4ccb1fa12c91dc | arc | unknown | NOK | http://autobuild.buildroot.net/results/ef6f7678012287f8f3dddacee2e2665f4d1f4db5 | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/2be7430cbf583ee5e91b12a5313d7c2086ed9aff | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/21dc838c51760a9eff10b058cd60f89c139ddf3c | arc | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/0f533f0442fe5ae876ea4f7fe7dfdba619aea94b | mips64el | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/36937983c8e9ff08cae1502717f9b4a260639592 | i586 | wine-7.0 | NOK | http://autobuild.buildroot.net/results/61f31182099d71189091d237887eb0c2df8880a6 | mips64el | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/7bb9fa6788bbbeab5ac0355e92780ac417ed7b06 | arm | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/8b7e57d70f145804df9cc6f8cc7d30dbb2102963 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/b2aa356c21784ce47cbc3f67783cc0453cec665e | m68k | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/e491d5811937a8c68175984d83f39afbeb898314 | microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/4d9baaf58c9059a79d8cb51c810eb1eb1ecb8c6e | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/c92cbeafd1637c5ce77c378b1c2c776a26ecaa92 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/70a2e6fef040d5e391e80043dc8e3ba074205d4c | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/8628f94851ba50e356ea5f03285058baa4d66303 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 perl-5.34.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8b4069306024df930a8827aefd1054cda9ee78fb | powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/a9fdd07354246d8cada2a928f8202c9281e9fe7d | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-go-1.18.6 | 2 gerbera-1.10.0 | 1 grep-3.7 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 linux-5.17.15 | 1 sdl-1.2.15 | 1 sudo-1.9.11p2 | 1 unknown | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1eb3d7cea3510eb469760ca65c66ddee3603727e | arceb | grep-3.7 | NOK | http://autobuild.buildroot.net/results/fb7b57e3432468420877092365bd5d1a435e9d78 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/b114e6e61179acf71cb0d778558c21e98d34b35d | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/0504bcc6f8782b53e2fb27580aca257b8b887f35 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/1466ef7769ccdf55a26fc2f364da60173c1da846 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/67db6665a58434f036cabfe097db100f99cd1ac7 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/4cc7613dc062ce8676f554038610a0defab1504f | ORPH sh4 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/ba6dad05e8fa3c4b88842d7c432571a08bf2a83c | ORPH sparc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/474d76d113169f73fc8085f6bf381cea5bd3a06b | ORPH m68k | unknown | NOK | http://autobuild.buildroot.net/results/af6638e99ca058b8a5258b512908907f6f2798f8 | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/9cf621bf2a89c40276913d3630c0775951bca128 | -- http://autobuild.buildroot.net From angelo at amarulasolutions.com Fri Oct 14 06:58:55 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:55 +0200 Subject: [Buildroot] [PATCH v2 0/5] Lichee RV and Lichee RV dock support Message-ID: <20221014065900.3311604-1-angelo@amarulasolutions.com> In order to support bluetooth on the dock, I had to fully enable the CONFIG_EXTRA_FIRMWARE mechanism: indeed the bluetooth driver requires a firmware which is not available at the moment of loading if not embedded in the kernel image. I choose to install the extra firmware files in staging, so there is no need to clean the target filesystem for those files after building the kernel. The macro KCONFIG_APPEND_OPT was needed so each one of the packages willing to have a firmware embedded can simply have a $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,firmware.bin) Changelog: v2: * Renamed the configs from lichee_rv_* to sipeed_lichee_rv_* * Moved the boards directories intoboard/sipeed * Added bluetooth support for lichee_rv_dock * Updated the opensbi, uboot, linux version to the same as nezha Angelo Compagnucci (5): linux: enable CONFIG_EXTRA_FIRMWARE_DIR package/pkg-utils: add KCONFIG_APPEND_OPT ackage/rtl8723ds-bt: new package configs/lichee_rv: new defconfig configs/lichee_rv_dock: new defconfig board/sipeed/lichee_rv/genimage.cfg | 37 +++++++++++++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ board/sipeed/lichee_rv/readme.txt | 26 +++++++++ board/sipeed/lichee_rv_dock/genimage.cfg | 37 +++++++++++++ .../overlay/etc/network/interfaces | 7 +++ .../overlay/etc/wpa_supplicant.conf | 8 +++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ ...-d1-lichee-rv-dock-add-bluetooth-bin.patch | 33 ++++++++++++ board/sipeed/lichee_rv_dock/readme.txt | 45 ++++++++++++++++ configs/sipeed_lichee_rv_defconfig | 34 ++++++++++++ configs/sipeed_lichee_rv_dock_defconfig | 40 ++++++++++++++ linux/linux.mk | 6 ++- package/Config.in | 1 + package/pkg-utils.mk | 10 ++++ package/rtl8723ds-bt/Config.in | 6 +++ package/rtl8723ds-bt/rtl8723ds-bt.hash | 2 + package/rtl8723ds-bt/rtl8723ds-bt.mk | 28 ++++++++++ 17 files changed, 427 insertions(+), 1 deletion(-) create mode 100644 board/sipeed/lichee_rv/genimage.cfg create mode 100644 board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv/readme.txt create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch create mode 100644 board/sipeed/lichee_rv_dock/readme.txt create mode 100644 configs/sipeed_lichee_rv_defconfig create mode 100644 configs/sipeed_lichee_rv_dock_defconfig create mode 100644 package/rtl8723ds-bt/Config.in create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:56 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:56 +0200 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-2-angelo@amarulasolutions.com> CONFIG_EXTRA_FIRMWARE_DIR must point to the directory where firmware file from CONFIG_EXTRA_FIRMWARE will be taken to be embedded to the kernel. The option is removed if CONFIG_EXTRA_FIRMWARE is not used, but it defaults to a sensible value when used. Signed-off-by: Angelo Compagnucci --- linux/linux.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/linux/linux.mk b/linux/linux.mk index efdc21eff2..9a909c7d7b 100644 --- a/linux/linux.mk +++ b/linux/linux.mk @@ -408,6 +408,9 @@ define LINUX_KCONFIG_FIXUP_CMDS $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO) $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO_LINUX_CLUT224)) $(call KCONFIG_DISABLE_OPT,CONFIG_GCC_PLUGINS) + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full + # path for locating firmware file. + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") $(PACKAGES_LINUX_CONFIG_FIXUPS) endef -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:57 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:57 +0200 Subject: [Buildroot] [PATCH v2 2/5] package/pkg-utils: add KCONFIG_APPEND_OPT In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-3-angelo@amarulasolutions.com> This macro can be used to append a value to a previously configured option where the intent is to join the old value with the new one. Signed-off-by: Angelo Compagnucci --- package/pkg-utils.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk index 0945e6ed31..d812946934 100644 --- a/package/pkg-utils.mk +++ b/package/pkg-utils.mk @@ -33,6 +33,16 @@ define KCONFIG_ENABLE_OPT $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=y, $(2)); \ fi endef +# KCONFIG_APPEND_OPT (option, value, [, file]) +# If the option is already set append, else add new. +define KCONFIG_APPEND_OPT + $(Q)if ! grep -q '^$(strip $(1))' $(call KCONFIG_DOT_CONFIG,$(3)); then \ + $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=$(2), $(3)); \ + else \ + grep -E '$(strip $(1)).*$(strip $(2))' $(call KCONFIG_DOT_CONFIG,$(3)) || \ + $(SED) 's|$(1)="\(.*\)"|$(1)="\1 $(2)"|g' $(call KCONFIG_DOT_CONFIG,$(3)); \ + fi +endef # KCONFIG_SET_OPT (option, value [, file]) KCONFIG_SET_OPT = $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=$(2), $(3)) # KCONFIG_DISABLE_OPT (option [, file]) -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:58 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:58 +0200 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-4-angelo@amarulasolutions.com> This package enables the Bluetooth device embedded in the RTL8723DS chip. Signed-off-by: Angelo Compagnucci --- linux/linux.mk | 3 ++- package/Config.in | 1 + package/rtl8723ds-bt/Config.in | 6 ++++++ package/rtl8723ds-bt/rtl8723ds-bt.hash | 2 ++ package/rtl8723ds-bt/rtl8723ds-bt.mk | 28 ++++++++++++++++++++++++++ 5 files changed, 39 insertions(+), 1 deletion(-) create mode 100644 package/rtl8723ds-bt/Config.in create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk diff --git a/linux/linux.mk b/linux/linux.mk index 9a909c7d7b..8ae5a97a80 100644 --- a/linux/linux.mk +++ b/linux/linux.mk @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) # Starting with 4.16, the generated kconfig paser code is no longer # shipped with the kernel sources, so we need flex and bison, but diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..4f6e508106 100644 --- a/package/Config.in +++ b/package/Config.in @@ -578,6 +578,7 @@ endmenu source "package/rtl8189fs/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" + source "package/rtl8723ds-bt/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" source "package/rtl8821au/Config.in" source "package/sane-backends/Config.in" diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in new file mode 100644 index 0000000000..ab4ba0bf11 --- /dev/null +++ b/package/rtl8723ds-bt/Config.in @@ -0,0 +1,6 @@ +config BR2_PACKAGE_RTL8723DS_BT + bool "rtl8723ds-bt" + help + rtl8723ds UART attached Bluetooth driver + + https://github.com/wsyco/RTL8723DS_BT_Linux diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.hash b/package/rtl8723ds-bt/rtl8723ds-bt.hash new file mode 100644 index 0000000000..1ec4e350f9 --- /dev/null +++ b/package/rtl8723ds-bt/rtl8723ds-bt.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4 rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.mk b/package/rtl8723ds-bt/rtl8723ds-bt.mk new file mode 100644 index 0000000000..be1b9a9cc2 --- /dev/null +++ b/package/rtl8723ds-bt/rtl8723ds-bt.mk @@ -0,0 +1,28 @@ +################################################################################ +# +# rtl8723ds-bt +# +################################################################################ + +RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08 +RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION)) +RTL8723DS_BT_LICENSE = PROPRIETARY +RTL8723DS_BT_INSTALL_STAGING = YES + +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) + $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) +endef + +define RTL8723DS_BT_INSTALL_STAGING_CMDS + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ + cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin + cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin +endef + +$(eval $(generic-package)) -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:59 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:59 +0200 Subject: [Buildroot] [PATCH v2 4/5] configs/lichee_rv: new defconfig In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-5-angelo@amarulasolutions.com> Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. Board support is based on the nezha defconfig already available in buildroot. https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html https://linux-sunxi.org/Sipeed_Lichee_RV Signed-off-by: Angelo Compagnucci --- board/sipeed/lichee_rv/genimage.cfg | 37 +++++++++++++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ board/sipeed/lichee_rv/readme.txt | 26 +++++++++ configs/sipeed_lichee_rv_defconfig | 34 ++++++++++++ 4 files changed, 151 insertions(+) create mode 100644 board/sipeed/lichee_rv/genimage.cfg create mode 100644 board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv/readme.txt create mode 100644 configs/sipeed_lichee_rv_defconfig diff --git a/board/sipeed/lichee_rv/genimage.cfg b/board/sipeed/lichee_rv/genimage.cfg new file mode 100644 index 0000000000..52603c3f70 --- /dev/null +++ b/board/sipeed/lichee_rv/genimage.cfg @@ -0,0 +1,37 @@ +# Minimal SD card image for the sipeed Lichee RV + +image sdcard.img { + hdimage { + } + + partition boot0-1 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 8K + } + + partition boot0-2 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 128K + } + + partition u-boot-1 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 12M + } + + partition u-boot-2 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 16400K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + offset = 18M + } +} diff --git a/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch b/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch new file mode 100644 index 0000000000..69ebe3b21d --- /dev/null +++ b/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch @@ -0,0 +1,54 @@ +From 4a923e0e4ef6d2b41cb89d658e269adada847573 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Thu, 4 Nov 2021 22:32:04 +0100 +Subject: [PATCH] Makefile: HACK: Support building u-boot.toc1 for nezda board + +For easier integration into Buildroot. The boot0 / toc1 logic is WIP until +U-Boot gains SPL support for the D1, so add a hack to make it easier to +integrate in Buildroot as-is. + +Signed-off-by: Peter Korsgaard +--- + Makefile | 9 +++++++++ + nezha.cfg | 9 +++++++++ + 2 files changed, 18 insertions(+) + create mode 100644 nezha.cfg + +diff --git a/Makefile b/Makefile +index f911f70344..259d93bf80 100644 +--- a/Makefile ++++ b/Makefile +@@ -1084,6 +1084,15 @@ endif + .binman_stamp: FORCE + @touch $@ + ++fw_dynamic.bin: $(OPENSBI) ++ $(call if_changed,copy) ++ ++MKIMAGEFLAGS_u-boot.toc1 = -T sunxi_toc1 ++u-boot.toc1: lichee-rv.cfg fw_dynamic.bin inputs ++ $(call if_changed,mkimage) ++ ++all: u-boot.toc1 ++ + ifeq ($(CONFIG_DEPRECATED),y) + $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") + endif +diff --git a/lichee-rv.cfg b/lichee-rv.cfg +new file mode 100644 +index 0000000000..2d23b9b388 +--- /dev/null ++++ b/lichee-rv.cfg +@@ -0,0 +1,9 @@ ++[opensbi] ++file = fw_dynamic.bin ++addr = 0x40000000 ++[dtb] ++file = arch/riscv/dts/sun20i-d1-lichee-rv.dtb ++addr = 0x44000000 ++[u-boot] ++file = u-boot-nodtb.bin ++addr = 0x4a000000 +-- +2.20.1 + diff --git a/board/sipeed/lichee_rv/readme.txt b/board/sipeed/lichee_rv/readme.txt new file mode 100644 index 0000000000..008be3a3bc --- /dev/null +++ b/board/sipeed/lichee_rv/readme.txt @@ -0,0 +1,26 @@ +Lichee RV +=============== + +Lichee RV - Nezha CM is a compute module with modular design, equipped +with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. +It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin +connectors to route all IO, making it convient for wide use and easy to replace. + +How to build +============ + +$ make lichee_rv_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Connect a TTL UART to the debug connector, insert the microSD card and +plug in a USB-C cable to the PWR connector to boot the system. diff --git a/configs/sipeed_lichee_rv_defconfig b/configs/sipeed_lichee_rv_defconfig new file mode 100644 index 0000000000..355d5caa70 --- /dev/null +++ b/configs/sipeed_lichee_rv_defconfig @@ -0,0 +1,34 @@ +BR2_riscv=y +BR2_GLOBAL_PATCH_DIR="board/sipeed/lichee_rv/patches" +BR2_ROOTFS_OVERLAY="board/nezha/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,fe178cf0153d98b71cb01a46c8cc050826a17e77)/linux-fe178cf0153d98b71cb01a46c8cc050826a17e77.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="nezha" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_OPENSBI=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,opensbi,e6793dc36a71537023f078034fe795c64a9992a3)/opensbi-e6793dc36a71537023f078034fe795c64a9992a3.tar.gz" +BR2_TARGET_OPENSBI_PLAT="generic" +# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set +BR2_TARGET_SUN20I_D1_SPL=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,d1-2022-05-26)/uboot-d1-2022-05-26.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.toc1" +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:59:00 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:59:00 +0200 Subject: [Buildroot] [PATCH v2 5/5] configs/lichee_rv_dock: new defconfig In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-6-angelo@amarulasolutions.com> Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer. https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html Signed-off-by: Angelo Compagnucci --- board/sipeed/lichee_rv_dock/genimage.cfg | 37 +++++++++++++ .../overlay/etc/network/interfaces | 7 +++ .../overlay/etc/wpa_supplicant.conf | 8 +++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ ...-d1-lichee-rv-dock-add-bluetooth-bin.patch | 33 ++++++++++++ board/sipeed/lichee_rv_dock/readme.txt | 45 ++++++++++++++++ configs/sipeed_lichee_rv_dock_defconfig | 40 ++++++++++++++ 7 files changed, 224 insertions(+) create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch create mode 100644 board/sipeed/lichee_rv_dock/readme.txt create mode 100644 configs/sipeed_lichee_rv_dock_defconfig diff --git a/board/sipeed/lichee_rv_dock/genimage.cfg b/board/sipeed/lichee_rv_dock/genimage.cfg new file mode 100644 index 0000000000..016acc3611 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/genimage.cfg @@ -0,0 +1,37 @@ +# Minimal SD card image for the sipeed Lichee RV dock + +image sdcard.img { + hdimage { + } + + partition boot0-1 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 8K + } + + partition boot0-2 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 128K + } + + partition u-boot-1 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 12M + } + + partition u-boot-2 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 16400K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + offset = 18M + } +} diff --git a/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces b/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file mode 100644 index 0000000000..62153aabd1 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces @@ -0,0 +1,7 @@ +auto lo +iface lo inet loopback + +auto wlan0 +iface wlan0 inet dhcp +pre-up modprobe 8723ds +wpa-conf /etc/wpa_supplicant.conf diff --git a/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf b/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file mode 100644 index 0000000000..b43292b0a7 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf @@ -0,0 +1,8 @@ +ap_scan=1 + +network={ + ssid="YOURSSID" + scan_ssid=1 + key_mgmt=WPA-PSK + psk="YOURPASSWD" +} diff --git a/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch b/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch new file mode 100644 index 0000000000..396d928b85 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch @@ -0,0 +1,54 @@ +From 4a923e0e4ef6d2b41cb89d658e269adada847573 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Thu, 4 Nov 2021 22:32:04 +0100 +Subject: [PATCH] Makefile: HACK: Support building u-boot.toc1 for nezda board + +For easier integration into Buildroot. The boot0 / toc1 logic is WIP until +U-Boot gains SPL support for the D1, so add a hack to make it easier to +integrate in Buildroot as-is. + +Signed-off-by: Peter Korsgaard +--- + Makefile | 9 +++++++++ + nezha.cfg | 9 +++++++++ + 2 files changed, 18 insertions(+) + create mode 100644 nezha.cfg + +diff --git a/Makefile b/Makefile +index f911f70344..259d93bf80 100644 +--- a/Makefile ++++ b/Makefile +@@ -1084,6 +1084,15 @@ endif + .binman_stamp: FORCE + @touch $@ + ++fw_dynamic.bin: $(OPENSBI) ++ $(call if_changed,copy) ++ ++MKIMAGEFLAGS_u-boot.toc1 = -T sunxi_toc1 ++u-boot.toc1: lichee-rv-dock.cfg fw_dynamic.bin inputs ++ $(call if_changed,mkimage) ++ ++all: u-boot.toc1 ++ + ifeq ($(CONFIG_DEPRECATED),y) + $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") + endif +diff --git a/lichee-rv-dock.cfg b/lichee-rv-dock.cfg +new file mode 100644 +index 0000000000..2d23b9b388 +--- /dev/null ++++ b/lichee-rv-dock.cfg +@@ -0,0 +1,9 @@ ++[opensbi] ++file = fw_dynamic.bin ++addr = 0x40000000 ++[dtb] ++file = arch/riscv/dts/sun20i-d1-lichee-rv-dock.dtb ++addr = 0x44000000 ++[u-boot] ++file = u-boot-nodtb.bin ++addr = 0x4a000000 +-- +2.20.1 + diff --git a/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch b/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch new file mode 100644 index 0000000000..091afeacdc --- /dev/null +++ b/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch @@ -0,0 +1,33 @@ +From add5f78e04e22f12da309f11122c1a9133b09d0b Mon Sep 17 00:00:00 2001 +From: Angelo Compagnucci +Date: Thu, 13 Oct 2022 22:37:29 +0200 +Subject: [PATCH] RISCV: dts: sun20i: d1: lichee-rv-dock: add bluetooth binding + +UART1 is attached to a rtl8723ds bluetooth module + +Signed-off-by: Angelo Compagnucci +--- + arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts b/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts +index 0b0f356e2e..c27e682c5e 100644 +--- a/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts ++++ b/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts +@@ -158,6 +158,13 @@ + pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; + pinctrl-names = "default"; + status = "okay"; ++ ++ bluetooth { ++ compatible = "realtek,rtl8723ds-bt"; ++ device-wake-gpios = <&gpio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */ ++ enable-gpios = <&gpio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */ ++ host-wake-gpios = <&gpio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ ++ }; + }; + + &usbphy { +-- +2.25.1 + diff --git a/board/sipeed/lichee_rv_dock/readme.txt b/board/sipeed/lichee_rv_dock/readme.txt new file mode 100644 index 0000000000..34478cafcc --- /dev/null +++ b/board/sipeed/lichee_rv_dock/readme.txt @@ -0,0 +1,45 @@ +Lichee RV dock +=============== + +Lichee RV Dock is a RISC-V Linux development kits with high integration, small +size and affordable price designed for opensource developer. It's equipped with +HDMI interface and it supports many screen by its screen convert board. It's +also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module, +an analog microphone and a speaker jack interface. + +How to build +============ + +$ make lichee_rv_dock_defconfig +$ make + +Wifi +========== + +Edit board/lichee_rv/overlay_dock/etc/wpa_supplicant.conf or +/etc/wpa_supplicant.conf once connected to the board: + +* Replace YOURSSID with your AP ssid +* Replace YOURPASSWD with your AP password + +Bluetooth +========== + +To make the device discoverable and pairable, once connected to the board: + +* bluetoothctl power on +* bluetoothctl discoverable yes +* bluetoothctl pairable yes + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Connect a TTL UART to the debug connector, insert the microSD card and +plug in a USB-C cable to the PWR connector to boot the system. diff --git a/configs/sipeed_lichee_rv_dock_defconfig b/configs/sipeed_lichee_rv_dock_defconfig new file mode 100644 index 0000000000..6da3ae24e4 --- /dev/null +++ b/configs/sipeed_lichee_rv_dock_defconfig @@ -0,0 +1,40 @@ +BR2_riscv=y +BR2_GLOBAL_PATCH_DIR="board/sipeed/lichee_rv_dock/patches" +BR2_ROOTFS_OVERLAY="board/nezha/overlay board/sipeed/lichee_rv_dock/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv_dock/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,fe178cf0153d98b71cb01a46c8cc050826a17e77)/linux-fe178cf0153d98b71cb01a46c8cc050826a17e77.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="nezha" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv-dock" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_PACKAGE_BLUEZ5_UTILS=y +BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y +BR2_PACKAGE_RTL8723DS=y +BR2_PACKAGE_RTL8723DS_BT=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_OPENSBI=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,opensbi,e6793dc36a71537023f078034fe795c64a9992a3)/opensbi-e6793dc36a71537023f078034fe795c64a9992a3.tar.gz" +BR2_TARGET_OPENSBI_PLAT="generic" +# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set +BR2_TARGET_SUN20I_D1_SPL=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,d1-2022-05-26)/uboot-d1-2022-05-26.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.toc1" +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.25.1 From buildroot at busybox.net Fri Oct 14 08:25:46 2022 From: buildroot at busybox.net (busybox.net) Date: 14 Oct 2022 10:25:46 +0200 Subject: [Buildroot] ACTION REQUIRED Message-ID: <20221014102546.A559E46121730E57@busybox.net> An HTML attachment was scrubbed... URL: From feedback at dallmeier.com Fri Oct 14 09:10:17 2022 From: feedback at dallmeier.com (feedback at dallmeier.com) Date: Fri, 14 Oct 2022 11:10:17 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation Message-ID: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> An HTML attachment was scrubbed... URL: From yann.morin at orange.com Fri Oct 14 11:18:25 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:25 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel Message-ID: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> To generate the glibc locale data, we call into a recursive Makefile, so as to generate locales in parallel. This is done as part of a target-fialize hook. However, that hook is registered after all packages have been parsed, and as such, it maye be registered after hooks defined in packages. Furthermore, the expansion of target-finalize hooks is done in a recipe, so it is not easy to understand whether this generates a "simple" rule or not. As a consequence, despite the use of $(MAKE), make may not notice that the command is a recursive call, and will decide to close the jobserver file-descriptors, yieldiong warnings like: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. This causes the lcoale data to not be generated in parallel, which is initially all the fuss about using a sub-makefile... So, do as suggested, and prepend the hook with a '+', so that it isexplicit to make that it should not close its jobserver fds. Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) Signed-off-by: Yann E. MORIN Cc: Gleb Mazovetskiy --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..ededfa491d 100644 --- a/Makefile +++ b/Makefile @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) PACKAGES += host-localedef define GENERATE_GLIBC_LOCALES - $(MAKE) -f support/misc/gen-glibc-locales.mk \ + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ LOCALES="$(GLIBC_GENERATE_LOCALES)" \ Q=$(Q) -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Fri Oct 14 11:18:26 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:26 +0200 Subject: [Buildroot] [PATCH 2/3] support/scripts: don't require gawk to generate glibc gconv modules In-Reply-To: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> When a subset of the glibc gconv modules installed, we eed to generate a trimmed-down list of available modules. We currently use gawk for that. However, we are not using any GNU extension in that awk script, and it happens to work as expected when using mawk (which has no GNU extension). Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) did not explain why it used gawk explicitly, and given the age for that commit, we doubt we'd be able to have the involved participants recall anything from that period... Besides, gawk is not a requirement for Buildroot. Switch over to using plain awk. Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index 03012c1ce3..bc60fc0ce4 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -19,7 +19,7 @@ # we handle each with slightly different code, since the second never has # associated aliases. -gawk -v files="${1}" ' +awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Fri Oct 14 11:18:27 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:27 +0200 Subject: [Buildroot] [PATCH 3/3] toolchain: suppot gconv modules fro mglibc >= 2.34 In-Reply-To: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> Startig with glibc 2.34, the gconv modules description has been split in two: - a common definition in the old location, /usr/lib/gconv/gconv-modules - specific defitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ This is done so as to simplify the handling of glibc gconv modules, and eventually to segregate those outside of glibc, and so that third-parties may also provide their own gconv converters and their definitions. And starting with that same glibc version, most of the gconv modules definition is moved to an extra configuration file in that sub-directory. It is thus no longer possible to use special code pages, like cp850, which are very usefull to access FAT-formatted devices. Add suppot for this new gconv layout, while keeping support for older glibc versions. Note that the modules themselves are not moved or renaed, just the definition files have changed. Instead of passing the one old gonv modules definitions file on stdin, we pass the base directory to that file, and move into the script the responsibility to find all the gconv definition files. Signed-off-by: Yann E. MORIN Cc: Thomas Petazzoni Cc: Romain Naour Cc: Thomas De Schampheleire Cc: Giulio Benetti --- support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ toolchain/toolchain.mk | 9 +++++++-- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index bc60fc0ce4..e9ac48ca3f 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -1,11 +1,17 @@ #!/usr/bin/env bash # This script is used to generate a gconv-modules file that takes into -# account only the gconv modules installed by Buildroot. It receives -# on its standard input the original complete gconv-modules file from -# the toolchain, and as arguments the list of gconv modules that were -# actually installed, and writes on its standard output the new -# gconv-modules file. +# account only the gconv modules installed by Buildroot, and generates +# a stripped-down gconv-moduels file on its stdout. +# It takes two arguments: +# $1: the directory where to look for gconv modules definitions +# $2: a space-separated list of gconv modules that were actually +# installed + +# Starting with glibc-2.34, modules definitions are located in multiple +# files: +# ${1}/gconv-modules +# ${1}/gconv-modules.d/*.conf # The format of gconv-modules is precisely documented in the # file itself. It consists of two different directives: @@ -19,7 +25,11 @@ # we handle each with slightly different code, since the second never has # associated aliases. -awk -v files="${2}" ' +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do + [ -e "${f}" ] || continue + cat "${f}" +done \ +|awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk index 08d1649603..fe87a72ed4 100644 --- a/toolchain/toolchain.mk +++ b/toolchain/toolchain.mk @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ $(TARGET_DIR)/usr/lib/gconv \ || exit 1; \ + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ + fi; \ else \ for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS || exit 1; \ done; \ done; \ - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ + ./support/scripts/expunge-gconv-modules \ + $(STAGING_DIR)/usr/lib/$${d}/gconv \ + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ fi endef -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From quentin.schulz at theobroma-systems.com Fri Oct 14 12:48:35 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Fri, 14 Oct 2022 14:48:35 +0200 Subject: [Buildroot] Changing configuration options of package in another one In-Reply-To: References: Message-ID: Hi Jesse, On 10/13/22 15:06, Jesse Van Gavere wrote: > Hello, > > I'm in a bit of a peculiar situation for which I'm not sure what the > correct solution is. > I'm trying to implement the qt6 remote objects package, this has a > dependency on host-qt6remoteobjects because it needs a host tool from > it to build the target package, however, to build the host package it > needs qt6base network enabled in the host qt6 build, this is by > default turned off as it's not a necessity for the host tools needed > to build the target package. > > So to make it work I've added an enable for the network module to > HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, > what should I do here? Manipulate the qt6 host build it in the remote > objects package? Or maybe turn on the network module for the qt6 host > build whenever the target qt6 network module gets enabled? > Not sure I have entirely understood the issue but here's a try anyways :) I would add a build option to the host qt6 for network support in Kconfig, then have your remote objects package depends on this option being selected. If it's not selected, your package won't be selected either, which is what is desired I think? Cheers, Quentin From peter at korsgaard.com Fri Oct 14 13:48:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:18 +0200 Subject: [Buildroot] [PATCH] configs/visionfive_defconfig: new defconfig In-Reply-To: <20221008184016.2327196-1-peter@korsgaard.com> (Peter Korsgaard's message of "Sat, 8 Oct 2022 20:40:16 +0200") References: <20221008184016.2327196-1-peter@korsgaard.com> Message-ID: <87bkqeo6sd.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Add a defconfig for the Starfive VisionFive board, a board built around the > Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). > This board comes with functional lowlevel and U-Boot bootloaders in SPI > flash. The defconfig reuses these and only builds a (6.0 based) kernel and > rootfs. > The factory shipped U-Boot is hard coded to look at MMC partition 3 and > misses some variables, so we provide a uEnv.txt to fix that up, based on > what is done in provided Fedora image. > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/libmaxminddb: bump to version 1.7.1 In-Reply-To: <20221009201432.16067-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 22:14:32 +0200") References: <20221009201432.16067-1-fontaine.fabrice@gmail.com> Message-ID: <877d12o6ry.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 In-Reply-To: <20221009210613.49541-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:06:13 +0200") References: <20221009210613.49541-1-fontaine.fabrice@gmail.com> Message-ID: <8735bqo6rt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This release contains fixes for three minor memory safety problems. > None are believed to be exploitable, but we report most memory safety > problems as potential security vulnerabilities out of caution. > * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. > Reported by Qualys > * ssh-keygen(1): double free() in error path of file hashing step in > signing/verify code; GHPR333 > * ssh-keysign(8): double-free in error path introduced in openssh-8.9 > https://www.openssh.com/txt/release-9.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/cppzmq: bump to version 4.9.0 In-Reply-To: <20221009211445.62107-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:14:45 +0200") References: <20221009211445.62107-1-fontaine.fabrice@gmail.com> Message-ID: <87y1tims6z.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 In-Reply-To: <20221009212341.86425-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:23:41 +0200") References: <20221009212341.86425-1-fontaine.fabrice@gmail.com> Message-ID: <87tu46ms6u.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, > CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 > - Update hash of README.txt (Windows XP dropped with > https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:49:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/checksec: bump to version 2.6.0 In-Reply-To: <20221009213212.92009-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:32:12 +0200") References: <20221009213212.92009-1-fontaine.fabrice@gmail.com> Message-ID: <87pmeums5v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Update hash of LICENSE.txt (update in year with > https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) > https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:49:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/freeipmi: bump to version 1.6.10 In-Reply-To: <20221009213823.116245-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:38:23 +0200") References: <20221009213823.116245-1-fontaine.fabrice@gmail.com> Message-ID: <87lepims58.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:50:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:50:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: bump to version 2 In-Reply-To: <20221009214945.128155-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:49:45 +0200") References: <20221009214945.128155-1-fontaine.fabrice@gmail.com> Message-ID: <87h706ms3v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Replace rjk_cv_python24 by rjk_cv_python3 due to > https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca > http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html > https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/gmrender-resurrect: bump to version 0.1 In-Reply-To: <20221009215801.227838-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:58:01 +0200") References: <20221009215801.227838-1-fontaine.fabrice@gmail.com> Message-ID: <87czaums30.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > gmrender-resurrect uses threads since > https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de > https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 In-Reply-To: <20221009220250.310026-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:02:50 +0200") References: <20221009220250.310026-1-fontaine.fabrice@gmail.com> Message-ID: <878rlims2k.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This is a bug fix and enhancement release on the 3.7.x branch. > https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/isl: bump to version 0.25 In-Reply-To: <20221009220638.319188-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:06:38 +0200") References: <20221009220638.319188-1-fontaine.fabrice@gmail.com> Message-ID: <874jw6ms27.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:47:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:37 +0200 Subject: [Buildroot] [git commit] package/libmaxminddb: bump to version 1.7.1 Message-ID: <20221014135306.765EC86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=78aa8141aaef8a8dc05d5385694b795100373c24 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libmaxminddb/libmaxminddb.hash | 2 +- package/libmaxminddb/libmaxminddb.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmaxminddb/libmaxminddb.hash b/package/libmaxminddb/libmaxminddb.hash index cfe838f7e5..7e56351c0f 100644 --- a/package/libmaxminddb/libmaxminddb.hash +++ b/package/libmaxminddb/libmaxminddb.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 7620ac187c591ce21bcd7bf352376a3c56a933e684558a1f6bef4bd4f3f98267 libmaxminddb-1.6.0.tar.gz +sha256 e8414f0dedcecbc1f6c31cb65cd81650952ab0677a4d8c49cab603b3b8fb083e libmaxminddb-1.7.1.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/libmaxminddb/libmaxminddb.mk b/package/libmaxminddb/libmaxminddb.mk index 4037f89a15..993b4aec9d 100644 --- a/package/libmaxminddb/libmaxminddb.mk +++ b/package/libmaxminddb/libmaxminddb.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMAXMINDDB_VERSION = 1.6.0 +LIBMAXMINDDB_VERSION = 1.7.1 LIBMAXMINDDB_SITE = \ https://github.com/maxmind/libmaxminddb/releases/download/$(LIBMAXMINDDB_VERSION) LIBMAXMINDDB_INSTALL_STAGING = YES From peter at korsgaard.com Fri Oct 14 13:47:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:21 +0200 Subject: [Buildroot] [git commit] configs/visionfive_defconfig: new defconfig Message-ID: <20221014135306.64CE286CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3cc157e2e3c80027c69819f82d8bfe37bfb04049 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a defconfig for the Starfive VisionFive board, a board built around the Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (6.0 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3 and misses some variables, so we provide a uEnv.txt to fix that up, based on what is done in provided Fedora image. Signed-off-by: Peter Korsgaard --- DEVELOPERS | 2 ++ board/visionfive/genimage.cfg | 21 ++++++++++++++ .../visionfive/overlay/boot/extlinux/extlinux.conf | 4 +++ board/visionfive/overlay/boot/uEnv.txt | 15 ++++++++++ board/visionfive/readme.txt | 32 ++++++++++++++++++++++ configs/visionfive_defconfig | 17 ++++++++++++ 6 files changed, 91 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..bfde353c8a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2310,6 +2310,7 @@ F: board/openblocks/a6/ F: board/orangepi/ F: board/pandaboard/ F: board/roseapplepi/ +F: board/visionfive/ F: boot/shim/ F: boot/sun20i-d1-spl/ F: configs/avenger96_defconfig @@ -2324,6 +2325,7 @@ F: configs/orangepi_r1_defconfig F: configs/pandaboard_defconfig F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig +F: configs/visionfive_defconfig F: package/bats-core/ F: package/docker-compose/ F: package/dump1090/ diff --git a/board/visionfive/genimage.cfg b/board/visionfive/genimage.cfg new file mode 100644 index 0000000000..433387c901 --- /dev/null +++ b/board/visionfive/genimage.cfg @@ -0,0 +1,21 @@ +# Minimal SD card image for the Starfive VisionFive board + +image sdcard.img { + hdimage { + } + + # u-boot is hard coded to look at 3rd partition + partition dummy1 { + size = 512 + } + + partition dummy2 { + size = 512 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + } +} diff --git a/board/visionfive/overlay/boot/extlinux/extlinux.conf b/board/visionfive/overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..44ac6f7944 --- /dev/null +++ b/board/visionfive/overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label linux + kernel /boot/Image + devicetree /boot/jh7100-starfive-visionfive-v1.dtb + append console=ttyS0,115200 root=/dev/mmcblk0p3 diff --git a/board/visionfive/overlay/boot/uEnv.txt b/board/visionfive/overlay/boot/uEnv.txt new file mode 100644 index 0000000000..b831d2d230 --- /dev/null +++ b/board/visionfive/overlay/boot/uEnv.txt @@ -0,0 +1,15 @@ +fdt_high=0xffffffffffffffff +initrd_high=0xffffffffffffffff + +scriptaddr=0x88100000 +script_offset_f=0x1fff000 +script_size_f=0x1000 + +kernel_addr_r=0x84000000 +kernel_comp_addr_r=0x90000000 +kernel_comp_size=0x10000000 + +fdt_addr_r=0x88000000 +ramdisk_addr_r=0x88300000 + +bootcmd=devnum=0; run mmc_boot diff --git a/board/visionfive/readme.txt b/board/visionfive/readme.txt new file mode 100644 index 0000000000..7aefa24167 --- /dev/null +++ b/board/visionfive/readme.txt @@ -0,0 +1,32 @@ +Starfive VisionFive +=================== + +The VisionFive is a low-cost RISC-V 64-bit based platform, powered by a +Starfive JH7100 processor. + +https://doc-en.rvspace.org/Doc_Center/visionfive.html + +How to build +============ + +$ make visionfive_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Preparing the board +=================== + +Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). + +Insert your SD card. + +Power-up the board using an USB-C cable. diff --git a/configs/visionfive_defconfig b/configs/visionfive_defconfig new file mode 100644 index 0000000000..9f5fb03610 --- /dev/null +++ b/configs/visionfive_defconfig @@ -0,0 +1,17 @@ +BR2_riscv=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/visionfive/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/visionfive/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,cfcb617265422c0af0ae5bc9688dceba2d10b27a)/linux-cfcb617265422c0af0ae5bc9688dceba2d10b27a.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="visionfive" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-starfive-visionfive-v1" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_GENIMAGE=y From peter at korsgaard.com Fri Oct 14 13:48:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:02 +0200 Subject: [Buildroot] [git commit] package/cppzmq: bump to version 4.9.0 Message-ID: <20221014135306.951EB86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6b1efb7bd547f6b48c89db08ff19fa55bd07a1cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/cppzmq/cppzmq.hash | 2 +- package/cppzmq/cppzmq.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/cppzmq/cppzmq.hash b/package/cppzmq/cppzmq.hash index 31b93275df..3fbee7af28 100644 --- a/package/cppzmq/cppzmq.hash +++ b/package/cppzmq/cppzmq.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7a23639a45f3a0049e11a188e29aaedd10b2f4845f0000cf3e22d6774ebde0af cppzmq-4.8.1.tar.gz +sha256 3fdf5b100206953f674c94d40599bdb3ea255244dcc42fab0d75855ee3645581 cppzmq-4.9.0.tar.gz sha256 7e6db90e2e805c72b3daa77849d1cb5f1f92da0e69750c8a4aa1d86d70704748 LICENSE diff --git a/package/cppzmq/cppzmq.mk b/package/cppzmq/cppzmq.mk index 570ad4e3a3..d702cc174e 100644 --- a/package/cppzmq/cppzmq.mk +++ b/package/cppzmq/cppzmq.mk @@ -4,7 +4,7 @@ # ################################################################################ -CPPZMQ_VERSION = 4.8.1 +CPPZMQ_VERSION = 4.9.0 CPPZMQ_SITE = $(call github,zeromq,cppzmq,v$(CPPZMQ_VERSION)) CPPZMQ_INSTALL_STAGING = YES CPPZMQ_DEPENDENCIES = host-pkgconf zeromq From peter at korsgaard.com Fri Oct 14 13:47:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:46 +0200 Subject: [Buildroot] [git commit] package/openssh: security bump to version 9.1p1 Message-ID: <20221014135306.8752886CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) From peter at korsgaard.com Fri Oct 14 13:51:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:05 +0200 Subject: [Buildroot] [git commit] package/gmrender-resurrect: bump to version 0.1 Message-ID: <20221014135306.E8A7A86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=771e92d01d81fc983c4d3cce5f2de2b419b56114 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master gmrender-resurrect uses threads since https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gmrender-resurrect/Config.in | 2 +- package/gmrender-resurrect/gmrender-resurrect.hash | 2 +- package/gmrender-resurrect/gmrender-resurrect.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gmrender-resurrect/Config.in b/package/gmrender-resurrect/Config.in index db655ad7f4..de52410a73 100644 --- a/package/gmrender-resurrect/Config.in +++ b/package/gmrender-resurrect/Config.in @@ -1,7 +1,7 @@ config BR2_PACKAGE_GMRENDER_RESURRECT bool "gmrender-resurrect" depends on BR2_USE_WCHAR # gstreamer1 -> libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer1 -> libglib2, libupnp + depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_MMU # gstreamer1 select BR2_PACKAGE_GSTREAMER1 select BR2_PACKAGE_GST1_PLUGINS_BASE # run-time only diff --git a/package/gmrender-resurrect/gmrender-resurrect.hash b/package/gmrender-resurrect/gmrender-resurrect.hash index 526b2b6c34..f14abffc3b 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.hash +++ b/package/gmrender-resurrect/gmrender-resurrect.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c3a9c80c7058a9a1f32175da25a564fb3021a7055c2df3941e8da8860a509009 gmrender-resurrect-0.0.9.tar.gz +sha256 550b07bc6a073176ad7de0efd603663c9875311dfb81ae1075263e3fd6974335 gmrender-resurrect-0.1.tar.gz sha256 c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42 COPYING diff --git a/package/gmrender-resurrect/gmrender-resurrect.mk b/package/gmrender-resurrect/gmrender-resurrect.mk index 4a7efd71ab..77ac83ca41 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.mk +++ b/package/gmrender-resurrect/gmrender-resurrect.mk @@ -4,7 +4,7 @@ # ################################################################################ -GMRENDER_RESURRECT_VERSION = 0.0.9 +GMRENDER_RESURRECT_VERSION = 0.1 GMRENDER_RESURRECT_SITE = $(call github,hzeller,gmrender-resurrect,v$(GMRENDER_RESURRECT_VERSION)) # Original distribution does not have default configure, # so we need to autoreconf: From peter at korsgaard.com Fri Oct 14 13:49:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:09 +0200 Subject: [Buildroot] [git commit] package/checksec: bump to version 2.6.0 Message-ID: <20221014135306.B5C1786CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d5dc2bdf5895770a26617e58f1e61668ee564261 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE.txt (update in year with https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/checksec/checksec.hash | 4 ++-- package/checksec/checksec.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/checksec/checksec.hash b/package/checksec/checksec.hash index 41aae8188c..a29866ba07 100644 --- a/package/checksec/checksec.hash +++ b/package/checksec/checksec.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1034459d7cd2b0ee515c2b6b003375fec566fb59c838fc5e1961e1fcf76b54fa checksec-2.5.0.tar.gz -sha256 7888fee828bf56d547fc1f634e40638984148b4fc41373b7626eb465060640de LICENSE.txt +sha256 39d4158f96bdc7533ad6595703375c0046951fe4f6367b831ef92d9c66c1a307 checksec-2.6.0.tar.gz +sha256 55154b4be6dfcb3ff29d1e3648d0d07b3943a5fcc3af7c2e0e799b074734f722 LICENSE.txt diff --git a/package/checksec/checksec.mk b/package/checksec/checksec.mk index 61ef110f90..ed9846ac2d 100644 --- a/package/checksec/checksec.mk +++ b/package/checksec/checksec.mk @@ -4,7 +4,7 @@ # ################################################################################ -CHECKSEC_VERSION = 2.5.0 +CHECKSEC_VERSION = 2.6.0 CHECKSEC_SITE = $(call github,slimm609,checksec.sh,$(CHECKSEC_VERSION)) CHECKSEC_LICENSE = BSD-3-Clause CHECKSEC_LICENSE_FILES = LICENSE.txt From peter at korsgaard.com Fri Oct 14 13:49:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:44 +0200 Subject: [Buildroot] [git commit] package/freeipmi: bump to version 1.6.10 Message-ID: <20221014135306.C904A86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f0faa3b71c585cb70bcd6fa4bafb756b98130bd5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...eipmi-rename-md2-and-md5-functions-macros.patch | 695 --------------------- package/freeipmi/freeipmi.hash | 2 +- package/freeipmi/freeipmi.mk | 2 +- 3 files changed, 2 insertions(+), 697 deletions(-) diff --git a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch b/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch deleted file mode 100644 index 0de5b29c9c..0000000000 --- a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch +++ /dev/null @@ -1,695 +0,0 @@ -From 50eeda7f14c4eaa56aa86ba570a47557456544f2 Mon Sep 17 00:00:00 2001 -From: Albert Chu -Date: Wed, 19 Jan 2022 11:55:55 -0800 -Subject: [PATCH] libfreeipmi: rename md2 and md5 functions / macros - -Static compilation with libfreeipmi can lead to problems if -other software has similarly named md2/md5 functions -(such as md5_init()). Prefix all macros and functions with -'ipmi_' as needed. Update all callers accordingly. - -[Retrieved from: -https://github.com/chu11/freeipmi-mirror/commit/50eeda7f14c4eaa56aa86ba570a47557456544f2] -Signed-off-by: Fabrice Fontaine ---- - ChangeLog | 11 ++ - libfreeipmi/interface/ipmi-lan-interface.c | 48 +++---- - .../interface/ipmi-rmcpplus-interface.c | 2 +- - libfreeipmi/libcommon/ipmi-md2.c | 72 +++++------ - libfreeipmi/libcommon/ipmi-md2.h | 30 ++--- - libfreeipmi/libcommon/ipmi-md5.c | 64 +++++----- - libfreeipmi/libcommon/ipmi-md5.h | 18 +-- - libfreeipmi/util/ipmi-lan-util.c | 120 +++++++++--------- - 8 files changed, 188 insertions(+), 177 deletions(-) - -diff --git a/ChangeLog b/ChangeLog -index 883a195cf..60bf8c323 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,14 @@ -+2021-01-19 Albert Chu -+ -+ * libfreeipmi/libcommon/ipmi-md2.h, -+ libfreeipmi/libcommon/ipmi-md2.c, -+ libfreeipmi/libcommon/ipmi-md5.h, -+ libfreeipmi/libcommon/ipmi-md5.c: Static compilation with -+ libfreeipmi can lead to problems if other software has similarly -+ named md2/md5 functions (such as md5_init()). Prefix all macros -+ and functions with 'ipmi_' as needed. Update all callers -+ accordingly. -+ - 2022-01-18 Fabrice Fontaine - - * configure.ac: use pkg-config to find gcrypt -diff --git a/libfreeipmi/interface/ipmi-lan-interface.c b/libfreeipmi/interface/ipmi-lan-interface.c -index 20099d770..658be53e1 100644 ---- a/libfreeipmi/interface/ipmi-lan-interface.c -+++ b/libfreeipmi/interface/ipmi-lan-interface.c -@@ -533,37 +533,37 @@ assemble_ipmi_lan_pkt (fiid_obj_t obj_rmcp_hdr, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- uint8_t digest[MD2_DIGEST_LENGTH]; -+ ipmi_md2_t ctx; -+ uint8_t digest[IPMI_MD2_DIGEST_LENGTH]; - -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); - -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, msg_data_ptr, msg_data_count); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, digest, MD2_DIGEST_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, digest, IPMI_MD2_DIGEST_LENGTH); -+ ipmi_md2_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- uint8_t digest[MD5_DIGEST_LENGTH]; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, msg_data_ptr, msg_data_count); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, digest, MD5_DIGEST_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ uint8_t digest[IPMI_MD5_DIGEST_LENGTH]; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, digest, IPMI_MD5_DIGEST_LENGTH); -+ ipmi_md5_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } -diff --git a/libfreeipmi/interface/ipmi-rmcpplus-interface.c b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -index 1f462da7e..d1fd0753a 100644 ---- a/libfreeipmi/interface/ipmi-rmcpplus-interface.c -+++ b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -@@ -1134,7 +1134,7 @@ _construct_session_trlr_authentication_code (uint8_t integrity_algorithm, - { - hash_algorithm = IPMI_CRYPT_HASH_MD5; - hash_flags = 0; -- expected_digest_len = MD5_DIGEST_LENGTH; -+ expected_digest_len = IPMI_MD5_DIGEST_LENGTH; - copy_digest_len = IPMI_MD5_128_AUTHENTICATION_CODE_LENGTH; - } - else /* IPMI_INTEGRITY_ALGORITHM_HMAC_SHA256_128 */ -diff --git a/libfreeipmi/libcommon/ipmi-md2.c b/libfreeipmi/libcommon/ipmi-md2.c -index 6e9386be7..076b555bd 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.c -+++ b/libfreeipmi/libcommon/ipmi-md2.c -@@ -101,15 +101,15 @@ static unsigned char S[256] = - 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14 - }; - --#define L ctx->l --#define X ctx->x --#define C ctx->c --#define M ctx->m --#define Mlen ctx->mlen --#define MD2_MAGIC 0xf00fd00d -+#define L ctx->l -+#define X ctx->x -+#define C ctx->c -+#define M ctx->m -+#define Mlen ctx->mlen -+#define IPMI_MD2_MAGIC 0xf00fd00d - - int --md2_init (md2_t *ctx) -+ipmi_md2_init (ipmi_md2_t *ctx) - { - - if (ctx == NULL) -@@ -118,26 +118,26 @@ md2_init (md2_t *ctx) - return (-1); - } - -- ctx->magic = MD2_MAGIC; -+ ctx->magic = IPMI_MD2_MAGIC; - - L = 0; - Mlen = 0; -- memset (X, '\0', MD2_BUFFER_LENGTH); -- memset (C, '\0', MD2_CHKSUM_LENGTH); -- memset (M, '\0', MD2_BLOCK_LENGTH); -+ memset (X, '\0', IPMI_MD2_BUFFER_LENGTH); -+ memset (C, '\0', IPMI_MD2_CHKSUM_LENGTH); -+ memset (M, '\0', IPMI_MD2_BLOCK_LENGTH); - - return (0); - } - - static void --_md2_update_digest_and_checksum (md2_t *ctx) -+_ipmi_md2_update_digest_and_checksum (ipmi_md2_t *ctx) - { - unsigned int j, k; - uint8_t c, t; - - /* Update X */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - X[16+j] = M[j]; - X[32+j] = (X[16+j] ^ X[j]); -@@ -145,9 +145,9 @@ _md2_update_digest_and_checksum (md2_t *ctx) - - t = 0; - -- for (j = 0; j < MD2_ROUNDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_ROUNDS_LENGTH; j++) - { -- for (k = 0; k < MD2_BUFFER_LENGTH; k++) -+ for (k = 0; k < IPMI_MD2_BUFFER_LENGTH; k++) - { - t = X[k] = (X[k] ^ S[t]); - } -@@ -166,7 +166,7 @@ _md2_update_digest_and_checksum (md2_t *ctx) - * Set C[j] to C[j] xor S[c xor L]. - */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - c = M[j]; - C[j] = C[j] ^ S[c ^ L]; -@@ -175,10 +175,10 @@ _md2_update_digest_and_checksum (md2_t *ctx) - } - - int --md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD2_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -187,19 +187,19 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD2_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD2_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD2_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD2_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md2_update_digest_and_checksum (ctx); -+ _ipmi_md2_update_digest_and_checksum (ctx); - -- while ((buflen - bufcount) >= MD2_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD2_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD2_BLOCK_LENGTH); -- bufcount += MD2_BLOCK_LENGTH; -- _md2_update_digest_and_checksum (ctx); -+ memcpy (M, buf + bufcount, IPMI_MD2_BLOCK_LENGTH); -+ bufcount += IPMI_MD2_BLOCK_LENGTH; -+ _ipmi_md2_update_digest_and_checksum (ctx); - } - - Mlen = buflen - bufcount; -@@ -217,33 +217,33 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - } - - static void --_md2_append_padding_and_checksum (md2_t *ctx) -+_ipmi_md2_append_padding_and_checksum (ipmi_md2_t *ctx) - { - unsigned int padlen; - int padindex; - -- padlen = MD2_PADDING_LENGTH - Mlen; -+ padlen = IPMI_MD2_PADDING_LENGTH - Mlen; - padindex = padlen - 1; - -- md2_update_data (ctx, padding[padindex], padlen); -+ ipmi_md2_update_data (ctx, padding[padindex], padlen); - -- md2_update_data (ctx, C, MD2_CHKSUM_LENGTH); -+ ipmi_md2_update_data (ctx, C, IPMI_MD2_CHKSUM_LENGTH); - } - - int --md2_finish (md2_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen) - { -- if (ctx == NULL || ctx->magic != MD2_MAGIC -- || digest == NULL || digestlen < MD2_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC -+ || digest == NULL || digestlen < IPMI_MD2_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md2_append_padding_and_checksum (ctx); -- memcpy (digest, X, MD2_DIGEST_LENGTH); -+ _ipmi_md2_append_padding_and_checksum (ctx); -+ memcpy (digest, X, IPMI_MD2_DIGEST_LENGTH); - -- ctx->magic = ~MD2_MAGIC; -- return (MD2_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD2_MAGIC; -+ return (IPMI_MD2_DIGEST_LENGTH); - } - -diff --git a/libfreeipmi/libcommon/ipmi-md2.h b/libfreeipmi/libcommon/ipmi-md2.h -index c102fce2c..05328e85e 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.h -+++ b/libfreeipmi/libcommon/ipmi-md2.h -@@ -34,26 +34,26 @@ - - #include - --#define MD2_BLOCK_LENGTH 16 --#define MD2_BUFFER_LENGTH 48 --#define MD2_CHKSUM_LENGTH 16 --#define MD2_DIGEST_LENGTH 16 --#define MD2_PADDING_LENGTH 16 --#define MD2_ROUNDS_LENGTH 18 -- --typedef struct __md2 { -+#define IPMI_MD2_BLOCK_LENGTH 16 -+#define IPMI_MD2_BUFFER_LENGTH 48 -+#define IPMI_MD2_CHKSUM_LENGTH 16 -+#define IPMI_MD2_DIGEST_LENGTH 16 -+#define IPMI_MD2_PADDING_LENGTH 16 -+#define IPMI_MD2_ROUNDS_LENGTH 18 -+ -+typedef struct __ipmi_md2 { - uint32_t magic; - uint8_t l; - unsigned int mlen; -- uint8_t x[MD2_BUFFER_LENGTH]; -- uint8_t c[MD2_CHKSUM_LENGTH]; -- uint8_t m[MD2_BLOCK_LENGTH]; --} md2_t; -+ uint8_t x[IPMI_MD2_BUFFER_LENGTH]; -+ uint8_t c[IPMI_MD2_CHKSUM_LENGTH]; -+ uint8_t m[IPMI_MD2_BLOCK_LENGTH]; -+} ipmi_md2_t; - --int md2_init (md2_t *ctx); -+int ipmi_md2_init (ipmi_md2_t *ctx); - --int md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen); - --int md2_finish (md2_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD2_H */ -diff --git a/libfreeipmi/libcommon/ipmi-md5.c b/libfreeipmi/libcommon/ipmi-md5.c -index 17073b85f..c84e350a6 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.c -+++ b/libfreeipmi/libcommon/ipmi-md5.c -@@ -92,7 +92,7 @@ static uint32_t T[64] = - #define D ctx->d - #define M ctx->m - #define Mlen ctx->mlen --#define MD5_MAGIC 0xfb0fdb0d -+#define IPMI_MD5_MAGIC 0xfb0fdb0d - - #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) - #define G(x,y,z) (((x) & (z)) | ((y) & (~(z)))) -@@ -126,7 +126,7 @@ static uint32_t T[64] = - } while (0) - - int --md5_init (md5_t *ctx) -+ipmi_md5_init (ipmi_md5_t *ctx) - { - if (ctx == NULL) - { -@@ -134,13 +134,13 @@ md5_init (md5_t *ctx) - return (-1); - } - -- ctx->magic = MD5_MAGIC; -+ ctx->magic = IPMI_MD5_MAGIC; - - Mlen = 0; - ctx->bytes_mod_64 = 0; - ctx->bit_count[0] = 0; - ctx->bit_count[1] = 0; -- memset (M, '\0', MD5_BLOCK_LENGTH); -+ memset (M, '\0', IPMI_MD5_BLOCK_LENGTH); - - /* initial values are listed low-order byte first */ - A = 0x67452301; -@@ -152,16 +152,16 @@ md5_init (md5_t *ctx) - } - - static void --_md5_update_digest (md5_t *ctx) -+_ipmi_md5_update_digest (ipmi_md5_t *ctx) - { - uint32_t AA, BB, CC, DD; -- uint32_t X[MD5_BLOCK_WORDS_LENGTH]; -+ uint32_t X[IPMI_MD5_BLOCK_WORDS_LENGTH]; - unsigned int j; - - /* Note there are no endian issues here, compiler is required to - * handle shifts correctly - */ -- for (j = 0; j < MD5_BLOCK_WORDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD5_BLOCK_WORDS_LENGTH; j++) - X[j] = ((uint32_t)M[j*4] - | ((uint32_t)M[j*4+1] << 8) - | ((uint32_t)M[j*4+2] << 16) -@@ -251,7 +251,7 @@ _md5_update_digest (md5_t *ctx) - } - - static void --_md5_update_count (md5_t *ctx, unsigned int buflen) -+_ipmi_md5_update_count (ipmi_md5_t *ctx, unsigned int buflen) - { - - /* Use two uint32_t integers to hold our 64 bit count. -@@ -272,10 +272,10 @@ _md5_update_count (md5_t *ctx, unsigned int buflen) - } - - int --md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD5_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -284,28 +284,28 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD5_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD5_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD5_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD5_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md5_update_digest (ctx); -- _md5_update_count (ctx, bufcount); -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, bufcount); - -- while ((buflen - bufcount) >= MD5_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD5_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD5_BLOCK_LENGTH); -- bufcount += MD5_BLOCK_LENGTH; -- _md5_update_digest (ctx); -- _md5_update_count (ctx, MD5_BLOCK_LENGTH); -+ memcpy (M, buf + bufcount, IPMI_MD5_BLOCK_LENGTH); -+ bufcount += IPMI_MD5_BLOCK_LENGTH; -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, IPMI_MD5_BLOCK_LENGTH); - } - - Mlen = buflen - bufcount; - if (Mlen > 0) - { - memcpy (M, buf + bufcount, Mlen); -- _md5_update_count (ctx, Mlen); -+ _ipmi_md5_update_count (ctx, Mlen); - } - } - else -@@ -313,14 +313,14 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - /* Not enough data to update digest, just copy in data */ - memcpy (M + Mlen, buf, buflen); - Mlen += buflen; -- _md5_update_count (ctx, buflen); -+ _ipmi_md5_update_count (ctx, buflen); - } - - return (buflen); - } - - static void --_md5_append_padding_and_length (md5_t *ctx) -+_ipmi_md5_append_padding_and_length (ipmi_md5_t *ctx) - { - unsigned int padlen; - char length[8]; -@@ -348,23 +348,23 @@ _md5_append_padding_and_length (md5_t *ctx) - length[6] = (ctx->bit_count[0] & 0x00ff0000) >> 16; - length[7] = (ctx->bit_count[0] & 0xff000000) >> 24; - -- md5_update_data (ctx, padding, padlen); -- md5_update_data (ctx, length, 8); -+ ipmi_md5_update_data (ctx, padding, padlen); -+ ipmi_md5_update_data (ctx, length, 8); - } - - int --md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen) - { -- uint8_t buf[MD5_DIGEST_LENGTH]; -+ uint8_t buf[IPMI_MD5_DIGEST_LENGTH]; - -- if (ctx == NULL || ctx->magic != MD5_MAGIC -- || digest == NULL || digestlen < MD5_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC -+ || digest == NULL || digestlen < IPMI_MD5_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md5_append_padding_and_length (ctx); -+ _ipmi_md5_append_padding_and_length (ctx); - - /* Note there are no endian issues here, compiler is required to - * handle bitmasks and shifts correctly -@@ -387,7 +387,7 @@ md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) - buf[14] = (D & 0x00ff0000) >> 16; - buf[15] = (D & 0xff000000) >> 24; - -- memcpy (digest, buf, MD5_DIGEST_LENGTH); -- ctx->magic = ~MD5_MAGIC; -- return (MD5_DIGEST_LENGTH); -+ memcpy (digest, buf, IPMI_MD5_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD5_MAGIC; -+ return (IPMI_MD5_DIGEST_LENGTH); - } -diff --git a/libfreeipmi/libcommon/ipmi-md5.h b/libfreeipmi/libcommon/ipmi-md5.h -index 0f86f1754..6b863ef36 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.h -+++ b/libfreeipmi/libcommon/ipmi-md5.h -@@ -34,11 +34,11 @@ - - #include - --#define MD5_BLOCK_LENGTH 64 --#define MD5_BLOCK_WORDS_LENGTH (MD5_BLOCK_LENGTH/4) --#define MD5_DIGEST_LENGTH 16 -+#define IPMI_MD5_BLOCK_LENGTH 64 -+#define IPMI_MD5_BLOCK_WORDS_LENGTH (IPMI_MD5_BLOCK_LENGTH/4) -+#define IPMI_MD5_DIGEST_LENGTH 16 - --typedef struct __md5 { -+typedef struct __ipmi_md5 { - uint32_t magic; - unsigned int mlen; - unsigned int bytes_mod_64; -@@ -47,13 +47,13 @@ typedef struct __md5 { - uint32_t b; - uint32_t c; - uint32_t d; -- uint8_t m[MD5_BLOCK_LENGTH]; --} md5_t; -+ uint8_t m[IPMI_MD5_BLOCK_LENGTH]; -+} ipmi_md5_t; - --int md5_init (md5_t *ctx); -+int ipmi_md5_init (ipmi_md5_t *ctx); - --int md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen); - --int md5_finish (md5_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD5_H */ -diff --git a/libfreeipmi/util/ipmi-lan-util.c b/libfreeipmi/util/ipmi-lan-util.c -index cd269fcb9..a374acc8d 100644 ---- a/libfreeipmi/util/ipmi-lan-util.c -+++ b/libfreeipmi/util/ipmi-lan-util.c -@@ -281,33 +281,33 @@ ipmi_lan_check_session_authentication_code (fiid_obj_t obj_lan_session_hdr_rs, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, buf, len); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, buf, len); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, buf, len); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, buf, len); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - -@@ -451,45 +451,45 @@ ipmi_lan_check_packet_session_authentication_code (const void *pkt, - memcpy (pwbuf, authentication_code_data, authentication_code_data_len); - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md2_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md2_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md2_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md5_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md5_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md5_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - else /* authentication_type == IPMI_AUTHENTICATION_TYPE_STRAIGHT_PASSWORD_KEY diff --git a/package/freeipmi/freeipmi.hash b/package/freeipmi/freeipmi.hash index 05fb50bd4c..bc22d2ff6b 100644 --- a/package/freeipmi/freeipmi.hash +++ b/package/freeipmi/freeipmi.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 f25e1c35f3d0f1b5a99cc31ecc2353ca83ed46a15163842fba870127dc9c8206 freeipmi-1.6.9.tar.gz +sha256 fce4a1e401b6189c103d2b1203261d0bfbf45985c6f3fa44c51b186b13fe7a7d freeipmi-1.6.10.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.bmc-watchdog sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.ipmiconsole diff --git a/package/freeipmi/freeipmi.mk b/package/freeipmi/freeipmi.mk index b26ed0c0bf..916f2eb68a 100644 --- a/package/freeipmi/freeipmi.mk +++ b/package/freeipmi/freeipmi.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREEIPMI_VERSION = 1.6.9 +FREEIPMI_VERSION = 1.6.10 FREEIPMI_SITE = https://ftp.gnu.org/gnu/freeipmi FREEIPMI_LICENSE = GPL-3.0+, BSD-like (sunbmc) FREEIPMI_LICENSE_FILES = \ From peter at korsgaard.com Fri Oct 14 13:48:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:49 +0200 Subject: [Buildroot] [git commit] package/vim: security bump to version 9.0.0709 Message-ID: <20221014135306.A460A86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c2940513298fdb5a6e582916128e914243c784f5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Fri Oct 14 13:51:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:41 +0200 Subject: [Buildroot] [git commit] package/isl: bump to version 0.25 Message-ID: <20221014135307.1423886CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7b04fcea33a809dfd60bf60c5df1fc6f89555e74 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/isl/isl.hash | 2 +- package/isl/isl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/isl/isl.hash b/package/isl/isl.hash index 001fc9d115..46d8e920f3 100644 --- a/package/isl/isl.hash +++ b/package/isl/isl.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 043105cc544f416b48736fff8caf077fb0663a717d06b1113f16e391ac99ebad isl-0.24.tar.xz +sha256 be7b210647ccadf90a2f0b000fca11a4d40546374a850db67adb32fad4b230d9 isl-0.25.tar.xz sha256 3a2c398103f6bca0f50a9a9465deca9230b370b0212af5fdf31ed88a36215c30 LICENSE diff --git a/package/isl/isl.mk b/package/isl/isl.mk index 51e608b304..ce9aaecebc 100644 --- a/package/isl/isl.mk +++ b/package/isl/isl.mk @@ -4,7 +4,7 @@ # ################################################################################ -ISL_VERSION = 0.24 +ISL_VERSION = 0.25 ISL_SOURCE = isl-$(ISL_VERSION).tar.xz ISL_SITE = https://libisl.sourceforge.io ISL_LICENSE = MIT From peter at korsgaard.com Fri Oct 14 13:50:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:50:18 +0200 Subject: [Buildroot] [git commit] package/gesftpserver: bump to version 2 Message-ID: <20221014135306.D97EE86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=026265bf7e09e0348aefa79e7a1f32add925f23b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Replace rjk_cv_python24 by rjk_cv_python3 due to https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...r-of-v3-attributes-according-to-draft-iet.patch | 30 ---------------------- package/gesftpserver/gesftpserver.hash | 2 +- package/gesftpserver/gesftpserver.mk | 4 +-- 3 files changed, 3 insertions(+), 33 deletions(-) diff --git a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch b/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch deleted file mode 100644 index 3697d0e525..0000000000 --- a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4b5c7eb63894bd2b1fedeb2a8e9bd16bf3c8c555 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Bernd=20Holzm=C3=BCller?= - -Date: Mon, 11 Feb 2019 23:57:01 +0100 -Subject: [PATCH] Change order of v3-attributes according to - draft-ietf-secsh-filexfer-00/02 - -[yann.morin.1998 at free.fr: backport from upstream] -Signed-off-by: "Yann E. MORIN" ---- - v3.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/v3.c b/v3.c -index 57cc31e..1fd86ad 100644 ---- a/v3.c -+++ b/v3.c -@@ -121,8 +121,8 @@ static void v3_sendattrs(struct sftpjob *job, const struct sftpattr *attrs) { - fatal("sending out-of-range mtime"); - if(a != attrs->atime.seconds) - fatal("sending out-of-range mtime"); -- sftp_send_uint32(job->worker, m); - sftp_send_uint32(job->worker, a); -+ sftp_send_uint32(job->worker, m); - } - /* Note that we just discard unknown bits rather than reporting errors. */ - } --- -2.14.1 - diff --git a/package/gesftpserver/gesftpserver.hash b/package/gesftpserver/gesftpserver.hash index 790cbe97c2..6d910a84dd 100644 --- a/package/gesftpserver/gesftpserver.hash +++ b/package/gesftpserver/gesftpserver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4963b85787de3485085a5356c671c58b8b33125f528ff1b2fe8b534ed8a0c1bd sftpserver-1.tar.gz +sha256 b18b10405ef2b05c45450aafd6803f69efb4d2138e4e07fd186c1618027ee169 sftpserver-2.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index 20ad92d25a..b47ec1c5d3 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -4,7 +4,7 @@ # ################################################################################ -GESFTPSERVER_VERSION = 1 +GESFTPSERVER_VERSION = 2 GESFTPSERVER_SOURCE = sftpserver-$(GESFTPSERVER_VERSION).tar.gz GESFTPSERVER_SITE = http://www.greenend.org.uk/rjk/sftpserver GESFTPSERVER_LICENSE = GPL-2.0+ @@ -25,7 +25,7 @@ GESFTPSERVER_DEPENDENCIES += \ # Python on the host is only used for tests, which we don't use in # Buildroot -GESFTPSERVER_CONF_ENV += rjk_cv_python24=false +GESFTPSERVER_CONF_ENV += rjk_cv_python3=false # openssh/dropbear looks here define GESFTPSERVER_ADD_SYMLINK From peter at korsgaard.com Fri Oct 14 13:51:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:27 +0200 Subject: [Buildroot] [git commit] package/gnutls: bump to version 3.7.8 Message-ID: <20221014135307.045F786CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2acba99893cbe76926229f00e333b444a5570c6d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Fri Oct 14 14:07:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/sdl2: bump version to 2.24.1 In-Reply-To: <20221010075624.8662-1-mf@go-sys.de> (Michael Fischer's message of "Mon, 10 Oct 2022 09:56:24 +0200") References: <20221010075624.8662-1-mf@go-sys.de> Message-ID: <87zgdylcrc.fsf@dell.be.48ers.dk> >>>>> "Michael" == Michael Fischer writes: > Signed-off-by: Michael Fischer Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:07:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:42 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: bump to version 1.30 In-Reply-To: <20221010084944.685684-2-james.hilliard1@gmail.com> (James Hilliard's message of "Mon, 10 Oct 2022 02:49:44 -0600") References: <20221010084944.685684-1-james.hilliard1@gmail.com> <20221010084944.685684-2-james.hilliard1@gmail.com> Message-ID: <87r0zalcr5.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Drop patch which is now upstream. > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:07:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:39 +0200 Subject: [Buildroot] [PATCH 1/2] package/ell: bump to version 0.53 In-Reply-To: <20221010084944.685684-1-james.hilliard1@gmail.com> (James Hilliard's message of "Mon, 10 Oct 2022 02:49:43 -0600") References: <20221010084944.685684-1-james.hilliard1@gmail.com> Message-ID: <87v8omlcr8.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:08:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:32 +0200 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 In-Reply-To: <20221012204246.904703-1-leo@yuriev.ru> (=?utf-8?B?ItCb0LU=?= =?utf-8?B?0L7QvdC40LQg0K7RgNGM0LXQsg==?= (Leonid Yuriev)"'s message of "Wed, 12 Oct 2022 23:42:46 +0300") References: <20221012204246.904703-1-leo@yuriev.ru> Message-ID: <87mt9ylcpr.fsf@dell.be.48ers.dk> >>>>> "??????" == ?????? ????? (Leonid Yuriev) writes: > This is stable bugfix release of libmdbx. So it is reasonable to backport > this patch to all applicable releases/branches of Buildroot. > Release notes for v0.11.12 > -------------------------- > Fixes: > - Fixed static assertion failure on platforms where the `off_t` type is wider > than corresponding fields of `struct flock` used for file locking (backport). > Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. > - Fixed assertion check inside `page_retire_ex()` (backport). > Minors: > - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). > - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). > The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md > Signed-off-by: ?????? ????? (Leonid Yuriev) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:08:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:57 +0200 Subject: [Buildroot] [PATCH] package/libnss: bump version to 3.84 In-Reply-To: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Thu, 13 Oct 2022 19:24:33 +0200") References: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> Message-ID: <87ilkmlcp2.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > Signed-off-by: Giulio Benetti Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:06:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:16 +0200 Subject: [Buildroot] [git commit] package/sdl2: bump version to 2.24.1 Message-ID: <20221014140932.F086D86CE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17a0980bc50c3bc3daec00cf57b7c00e2a71a60a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Fischer Signed-off-by: Peter Korsgaard --- package/sdl2/sdl2.hash | 4 ++-- package/sdl2/sdl2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sdl2/sdl2.hash b/package/sdl2/sdl2.hash index 981c98531e..782c552c52 100644 --- a/package/sdl2/sdl2.hash +++ b/package/sdl2/sdl2.hash @@ -1,4 +1,4 @@ -# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.0.tar.gz.sig -sha256 91e4c34b1768f92d399b078e171448c6af18cafda743987ed2064a28954d6d97 SDL2-2.24.0.tar.gz +# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.1.tar.gz.sig +sha256 bc121588b1105065598ce38078026a414c28ea95e66ed2adab4c44d80b309e1b SDL2-2.24.1.tar.gz # Locally calculated sha256 fcb07e07ac6bc8b2fcf047b50431ef4ebe5b619d7ca7c82212018309a9067426 LICENSE.txt diff --git a/package/sdl2/sdl2.mk b/package/sdl2/sdl2.mk index 4585c33c9b..28e2c5cb36 100644 --- a/package/sdl2/sdl2.mk +++ b/package/sdl2/sdl2.mk @@ -4,7 +4,7 @@ # ################################################################################ -SDL2_VERSION = 2.24.0 +SDL2_VERSION = 2.24.1 SDL2_SOURCE = SDL2-$(SDL2_VERSION).tar.gz SDL2_SITE = http://www.libsdl.org/release SDL2_LICENSE = Zlib From peter at korsgaard.com Fri Oct 14 14:08:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:51 +0200 Subject: [Buildroot] [git commit] package/libnss: bump version to 3.84 Message-ID: <20221014140933.29ABD86CE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bcdf2fc0e41832147d3fc398070074be29c159d4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Peter Korsgaard --- package/libnss/libnss.hash | 4 ++-- package/libnss/libnss.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnss/libnss.hash b/package/libnss/libnss.hash index 026344668f..2b34cc1a77 100644 --- a/package/libnss/libnss.hash +++ b/package/libnss/libnss.hash @@ -1,4 +1,4 @@ -# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_83_RTM/src/SHA256SUMS -sha256 ab23ea67f964090b8b73c80a674082571c36e5f4eba92057ac648c9c1def0128 nss-3.83.tar.gz +# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_84_RTM/src/SHA256SUMS +sha256 9a387ffe350ff14f001d943f96cc0c064891551d71e1a97a5ddbffe7f1207a25 nss-3.84.tar.gz # Locally calculated sha256 a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4 nss/COPYING diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 88097c8db5..415ca900df 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNSS_VERSION = 3.83 +LIBNSS_VERSION = 3.84 LIBNSS_SOURCE = nss-$(LIBNSS_VERSION).tar.gz LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(subst .,_,$(LIBNSS_VERSION))_RTM/src LIBNSS_DISTDIR = dist From peter at korsgaard.com Fri Oct 14 14:06:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:50 +0200 Subject: [Buildroot] [git commit] package/iwd: bump to version 1.30 Message-ID: <20221014140933.1031186CED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b790f6e494e65b4704c1e6c5cd38c38fc0bd7719 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which is now upstream. Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- .../0001-src-storage.c-fix-build-with-uclibc.patch | 37 ---------------------- package/iwd/iwd.hash | 2 +- package/iwd/iwd.mk | 2 +- 3 files changed, 2 insertions(+), 39 deletions(-) diff --git a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch b/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch deleted file mode 100644 index 55fdaa86fd..0000000000 --- a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 99e74ade2ea892e6d0b070bec1df6a135ce2c8b3 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Mar 2022 16:35:49 +0100 -Subject: [PATCH] src/storage.c: fix build with uclibc - -explicit_bzero is used in src/storage.c since commit -01cd8587606bf2da1af245163150589834126c1c but src/missing.h is not -included, as a result build with uclibc fails on: - -/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init': -storage.c:(.text+0x13a4): undefined reference to `explicit_bzero' - -Fixes: - - http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1 - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://lists.01.org/hyperkitty/list/iwd at lists.01.org/thread/WB2XXRBUDHC5IVFDEOJBK23JHPURL427] ---- - src/storage.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/storage.c b/src/storage.c -index 82a72443..aa8066b1 100644 ---- a/src/storage.c -+++ b/src/storage.c -@@ -44,6 +44,7 @@ - #include - #include "ell/useful.h" - -+#include "src/missing.h" - #include "src/common.h" - #include "src/storage.h" - #include "src/crypto.h" --- -2.35.1 - diff --git a/package/iwd/iwd.hash b/package/iwd/iwd.hash index 1c34aa0a90..e7971cd637 100644 --- a/package/iwd/iwd.hash +++ b/package/iwd/iwd.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/network/wireless/sha256sums.asc -sha256 3f138e03301beb2afc7b385a62f56db17059137857ab579f269c4e441783e760 iwd-1.25.tar.xz +sha256 9fd13512dc27d83efb8d341f7df98f5488f70131686021fcd0d93fc97af013b8 iwd-1.30.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..4a818f0b82 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -4,7 +4,7 @@ # ################################################################################ -IWD_VERSION = 1.25 +IWD_VERSION = 1.30 IWD_SOURCE = iwd-$(IWD_VERSION).tar.xz IWD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/wireless IWD_LICENSE = LGPL-2.1+ From peter at korsgaard.com Fri Oct 14 14:07:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:06 +0200 Subject: [Buildroot] [git commit] package/libmdbx: bump version to 0.11.12 Message-ID: <20221014140933.1E33C86CEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=dd2ded3355c01f333c18dc16e7d9a3c496007960 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Fri Oct 14 14:06:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:40 +0200 Subject: [Buildroot] [git commit] package/ell: bump to version 0.53 Message-ID: <20221014140933.0635386CA6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=63ee0e8b35e556e34e724b74b951e80d3f571f3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/ell/ell.hash | 2 +- package/ell/ell.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ell/ell.hash b/package/ell/ell.hash index 9affa390b8..68832c3201 100644 --- a/package/ell/ell.hash +++ b/package/ell/ell.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/libs/ell/sha256sums.asc -sha256 a7ff8ecbc76b187d942dd22b61cb489711400897c790319ffb7e944791687c3f ell-0.49.tar.xz +sha256 a7d0df846af839bbea1b80f292166371070328854b3fa785b5c607fe600552ad ell-0.53.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/ell/ell.mk b/package/ell/ell.mk index 9735865eae..b27d6feb65 100644 --- a/package/ell/ell.mk +++ b/package/ell/ell.mk @@ -4,7 +4,7 @@ # ################################################################################ -ELL_VERSION = 0.49 +ELL_VERSION = 0.53 ELL_SOURCE = ell-$(ELL_VERSION).tar.xz ELL_SITE = $(BR2_KERNEL_MIRROR)/linux/libs/ell ELL_LICENSE = LGPL-2.1+ From peter at korsgaard.com Fri Oct 14 14:09:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:09:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 In-Reply-To: <20221001212114.11912-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:21:14 +0200") References: <20221001212114.11912-1-fontaine.fabrice@gmail.com> Message-ID: <87edvalcnh.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) > - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) > - Fix serve-stale crash that could happen when > stale-answer-client-timeout was set to 0 and there was a stale CNAME > in the cache for an incoming query. (CVE-2022-3080) > - Prevent excessive resource use while processing large delegations. > (CVE-2022-2795) > https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:10:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:18 +0200 Subject: [Buildroot] [PATCH 1/1] package/xz: bump to version 5.2.7 In-Reply-To: <20221001212938.25577-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:29:37 +0200") References: <20221001212938.25577-1-fontaine.fabrice@gmail.com> Message-ID: <87a65ylcmt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:11:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:11:40 +0200 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 In-Reply-To: <20221002004931.1805825-1-judge.packham@gmail.com> (Chris Packham's message of "Sun, 2 Oct 2022 13:49:30 +1300") References: <20221002004931.1805825-1-judge.packham@gmail.com> Message-ID: <875ygmlckj.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > This is a bug fix release. The changes are: > - extmod/machine_i2c: only use WRITE1 option if transfer supports it > This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it > writes the address to read from. > Signed-off-by: Chris Packham Committed, thanks. Does this mean that it also needs to be backported to 2022.08.x? If this is an esp32-only issue then presumably not? -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:12:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:12:36 +0200 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221002004931.1805825-2-judge.packham@gmail.com> (Chris Packham's message of "Sun, 2 Oct 2022 13:49:31 +1300") References: <20221002004931.1805825-1-judge.packham@gmail.com> <20221002004931.1805825-2-judge.packham@gmail.com> Message-ID: <871qralciz.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > Add new version. Remove patch that has been applied upstream. Update > hash for COPYING as it's text has changed to clarify some details but > the license remains LGP-2.0+L/GPL-2.0+. > Signed-off-by: Chris Packham > --- > ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- > package/syslog-ng/syslog-ng.hash | 4 +- > package/syslog-ng/syslog-ng.mk | 2 +- Don't you need to update the version in syslog-ng.conf as well? -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:09:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:09:43 +0200 Subject: [Buildroot] [git commit] package/bind: security bump to version 9.16.33 Message-ID: <20221014141258.1A5BB86D0A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index e5bf2be318..2f83a6276e 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Fri Oct 14 14:10:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:12 +0200 Subject: [Buildroot] [git commit] package/xz: bump to version 5.2.7 Message-ID: <20221014141258.2397186D0B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3ac7d91c874ae9212ae8aee400a194356e301169 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/xz/xz.hash | 3 +-- package/xz/xz.mk | 6 +----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/package/xz/xz.hash b/package/xz/xz.hash index 9577e98e80..3aa68791fd 100644 --- a/package/xz/xz.hash +++ b/package/xz/xz.hash @@ -1,6 +1,5 @@ # Locally calculated after checking pgp signature -sha256 5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df xz-5.2.5.tar.bz2 -sha256 98c6cb1042284fe704ec30083f3fc87364ce9ed2ea51f62bbb0ee9d3448717ec xzgrep-ZDI-CAN-16587.patch +sha256 b65f1d0c2708e57716f4dd2216989a73847ac6fdb4168ffceb155767e22b834b xz-5.2.7.tar.bz2 # Hash for license files sha256 bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c COPYING diff --git a/package/xz/xz.mk b/package/xz/xz.mk index cdb01e06a9..004eea94b2 100644 --- a/package/xz/xz.mk +++ b/package/xz/xz.mk @@ -4,7 +4,7 @@ # ################################################################################ -XZ_VERSION = 5.2.5 +XZ_VERSION = 5.2.7 XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2 XZ_SITE = https://tukaani.org/xz XZ_INSTALL_STAGING = YES @@ -13,10 +13,6 @@ XZ_LICENSE = Public Domain, GPL-2.0+, GPL-3.0+, LGPL-2.1+ XZ_LICENSE_FILES = COPYING COPYING.GPLv2 COPYING.GPLv3 COPYING.LGPLv2.1 XZ_CPE_ID_VENDOR = tukaani -XZ_PATCH = xzgrep-ZDI-CAN-16587.patch -# xzgrep-ZDI-CAN-16587.patch -XZ_IGNORE_CVES += CVE-2022-1271 - ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) XZ_CONF_OPTS += --enable-threads else From peter at korsgaard.com Fri Oct 14 14:10:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:54 +0200 Subject: [Buildroot] [git commit] package/micropython: Bug fix release 1.19.1 Message-ID: <20221014141258.2D42286D0D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=199f8fe65623cf5d547505c12edfb88d518f40a9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a bug fix release. The changes are: - extmod/machine_i2c: only use WRITE1 option if transfer supports it This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it writes the address to read from. Signed-off-by: Chris Packham Signed-off-by: Peter Korsgaard --- package/micropython/micropython.hash | 2 +- package/micropython/micropython.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/micropython/micropython.hash b/package/micropython/micropython.hash index 09bc574ebc..7bff7de4e2 100644 --- a/package/micropython/micropython.hash +++ b/package/micropython/micropython.hash @@ -1,3 +1,3 @@ #locally computed -sha256 128b6fb13b518b4d3e75b4f0c04f175dc336c762d8c6360f647e91dc4d25e5d0 micropython-1.19.tar.gz +sha256 c980ad7e742491df0dc10db2958137dbbf9aa7a8009e102fc75f4c0cac2d6b5e micropython-1.19.1.tar.gz sha256 0f678c2abd7fe2cfca36693630506bbcbdfc219bd04bf4a02fe3b094ae4c666f LICENSE diff --git a/package/micropython/micropython.mk b/package/micropython/micropython.mk index f7af9bfc32..51b45e5e99 100644 --- a/package/micropython/micropython.mk +++ b/package/micropython/micropython.mk @@ -4,7 +4,7 @@ # ################################################################################ -MICROPYTHON_VERSION = 1.19 +MICROPYTHON_VERSION = 1.19.1 MICROPYTHON_SITE = $(call github,micropython,micropython,v$(MICROPYTHON_VERSION)) # Micropython has a lot of code copied from other projects, and also a number # of submodules for various libs. However, we don't even clone the submodules, From peter at korsgaard.com Fri Oct 14 14:44:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:44:03 +0200 Subject: [Buildroot] [PATCH 1/1] package/unbound: bump version to 1.17.0 In-Reply-To: <20221013164244.150039-1-kyle@balena.io> (Kyle Harding via buildroot's message of "Thu, 13 Oct 2022 12:42:44 -0400") References: <20221013164244.150039-1-kyle@balena.io> Message-ID: <87wn92jwi4.fsf@dell.be.48ers.dk> >>>>> "Kyle" == Kyle Harding via buildroot writes: > Signed-off-by: Kyle Harding Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:43:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:43:37 +0200 Subject: [Buildroot] [git commit] package/unbound: bump version to 1.17.0 Message-ID: <20221014144442.1FBFE86D16@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eeeaa801f38e20b421b798c8e937e79cbd1d7cfa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Kyle Harding Signed-off-by: Peter Korsgaard --- package/unbound/unbound.hash | 4 ++-- package/unbound/unbound.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/unbound/unbound.hash b/package/unbound/unbound.hash index cef8edc4a2..147ac7b13a 100644 --- a/package/unbound/unbound.hash +++ b/package/unbound/unbound.hash @@ -1,5 +1,5 @@ -# From https://nlnetlabs.nl/downloads/unbound/unbound-1.16.3.tar.gz.sha256 -sha256 ea0c6665e2c3325b769eac1dfccd60fe1828d5fcf662650039eccb3f67edb28e unbound-1.16.3.tar.gz +# From https://nlnetlabs.nl/downloads/unbound/unbound-1.17.0.tar.gz.sha256 +sha256 dcbc95d7891d9f910c66e4edc9f1f2fde4dea2eec18e3af9f75aed44a02f1341 unbound-1.17.0.tar.gz # Locally calculated sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSE diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index 73a460d103..d86d9c2067 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -4,7 +4,7 @@ # ################################################################################ -UNBOUND_VERSION = 1.16.3 +UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause From james.hilliard1 at gmail.com Fri Oct 14 15:06:51 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 09:06:51 -0600 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package Message-ID: <20221014150651.2527997-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/rtl8192eu/Config.in create mode 100644 package/rtl8192eu/rtl8192eu.hash create mode 100644 package/rtl8192eu/rtl8192eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..0a3ecee2eb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1404,6 +1404,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..e2ea999d60 100644 --- a/package/Config.in +++ b/package/Config.in @@ -576,6 +576,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..167864c35d --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 b2b363b8dc27c658cbfd5be32a65d0876cfd7c723ac6f72fdefeb6e44a9b1c9e rtl8192eu-7b17d51543859e23d845d473806347db3415e8e4.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..cb612a4c15 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 7b17d51543859e23d845d473806347db3415e8e4 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) -- 2.34.1 From peter at korsgaard.com Fri Oct 14 15:10:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 17:10:27 +0200 Subject: [Buildroot] [PATCH] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221014151028.3843939-1-peter@korsgaard.com> Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 15 +++++++-------- package/linux-headers/Config.in.host | 16 ++++++++-------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index f9caa3c652..ee59761f33 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 07963f185e..e1fd0feb44 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,15 +1,14 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 7aee67de56..8679241a2c 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -392,14 +392,14 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.19.13" if BR2_KERNEL_HEADERS_5_19 - default "6.0" if BR2_KERNEL_HEADERS_6_0 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 + default "5.19.15" if BR2_KERNEL_HEADERS_5_19 + default "6.0.1" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ -- 2.30.2 From mmayer at broadcom.com Fri Oct 14 17:20:12 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 10:20:12 -0700 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" Message-ID: <20221014172013.758628-1-mmayer@broadcom.com> Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer --- package/mmc-utils/Config.in | 8 ++++++++ package/mmc-utils/mmc-utils.mk | 10 +++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac44571..0283658a7a57 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + depends on BR2_PACKAGE_MMC_UTILS + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c84737869264..14e2bee58736 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(MMC_UTILS_CFLAGS)" \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS -- 2.34.1 From mmayer at broadcom.com Fri Oct 14 17:20:37 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 10:20:37 -0700 Subject: [Buildroot] [PATCH] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014005055.746362-1-mmayer@broadcom.com> References: <20221014005055.746362-1-mmayer@broadcom.com> Message-ID: On Thu, 13 Oct 2022 at 17:51, Markus Mayer wrote: > # override AM_CFLAGS as the project Makefile uses it to pass > # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts > # with the _FORTIFY_SOURCE that we pass when hardening options are > # enabled. > define MMC_UTILS_BUILD_CMDS > - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= > + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) CFLAGS=$(MMC_UTILS_CFLAGS) \ > + AM_CFLAGS= > endef Sorry, there are some quotes missing. v2 submitted. Regards, -Markus From yann.morin.1998 at free.fr Fri Oct 14 19:16:35 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:16:35 +0200 Subject: [Buildroot] [git commit] mmc-utils: allow enabling of dangerous commands Message-ID: <20221014191709.3132A86D23@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4c7f1a439ad44c8c7bd56a9e550fc059a14aeaa6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer [yann.morin.1998 at free.fr: - use if-endif block - move closer to main option for proper indentation ] Signed-off-by: Yann E. MORIN --- package/mmc-utils/Config.in | 11 +++++++++++ package/mmc-utils/mmc-utils.mk | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac445..953afec588 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -6,5 +6,16 @@ config BR2_PACKAGE_MMC_UTILS https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git +if BR2_PACKAGE_MMC_UTILS + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. + +endif + comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..14e2bee587 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(MMC_UTILS_CFLAGS)" \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS From yann.morin.1998 at free.fr Fri Oct 14 19:18:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:18:46 +0200 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014172013.758628-1-mmayer@broadcom.com> References: <20221014172013.758628-1-mmayer@broadcom.com> Message-ID: <20221014191846.GC2503@scaer> Markus, All, On 2022-10-14 10:20 -0700, Markus Mayer via buildroot spake thusly: > Provide a config option that allows the user to enable mmc's "dangerous > commands" if so desired. mmc-utils considers turning on permanent write > protection on a device a "dangerous command" and doesn't offer it by > default. > > Signed-off-by: Markus Mayer > --- > package/mmc-utils/Config.in | 8 ++++++++ > package/mmc-utils/mmc-utils.mk | 10 +++++++++- > 2 files changed, 17 insertions(+), 1 deletion(-) > > diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in > index 850aeac44571..0283658a7a57 100644 > --- a/package/mmc-utils/Config.in > +++ b/package/mmc-utils/Config.in > @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS > > comment "mmc-utils needs a toolchain w/ headers >= 3.0" > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > + > +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS > + bool "Enable dangerous commands" > + depends on BR2_PACKAGE_MMC_UTILS > + help > + Enable support for dangerous commands in mmc-utils. mmc-utils > + considers turning on permanent write protection on a device a > + "dangerous command" and doesn't offer it by default. Sub-options must immediately follow the main option, or the indentation is not correct. We also prefer if-endif blocks when introducing new sub-options, for consistency across the code base. Applied to master with the above two changes, thanks. Regards, Yann E. MORIN. > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c84737869264..14e2bee58736 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 > MMC_UTILS_LICENSE_FILES = mmc.h > > +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) > + > +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) > +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED > +endif > + > # override AM_CFLAGS as the project Makefile uses it to pass > # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts > # with the _FORTIFY_SOURCE that we pass when hardening options are > # enabled. > define MMC_UTILS_BUILD_CMDS > - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= > + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ > + CFLAGS="$(MMC_UTILS_CFLAGS)" \ > + AM_CFLAGS= > endef > > define MMC_UTILS_INSTALL_TARGET_CMDS > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 19:30:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:30:21 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation In-Reply-To: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> References: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> Message-ID: <20221014193021.GD2503@scaer> Andreas, All, On 2022-10-14 11:10 +0200, feedback--- via buildroot spake thusly: > Hi all, > > we are not sure if this is even a bug, but BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via 'menuconfig' without setting a > string for the bool value. Thanks for the suggestion. That was on purpose that this was not selectable, see the commit log that introduced the option, 20dd9453f32c (package/dhcpcd: add BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP), which referred to: https://patchwork.ozlabs.org/project/buildroot/patch/20210303091904.467706-1-fontaine.fabrice at gmail.com which basically said (paraphrasing): For such complex conditions, it is easier to introduce a Kconfig symbol, rather than write complex Makefile code in the .mk file. Indeed, before 20dd9453f32c, there were quite a few repetitive code blocks to handle each of them, see commit d412539dbca2 (package/dhcpcd: disable privsep on older kernels). Can you explain why you'd want to explicitly disable privilege separation in dhcpcd? > --- a/package/dhcpcd/Config.in > +++ b/package/dhcpcd/Config.in > @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD > ?if BR2_PACKAGE_DHCPCD > ? > ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP > -?????? bool > +?????? bool "enable privilege separation" > ??????? default y > ??????? depends on BR2_USE_MMU > ??????? # Audit headers were only added in recent kernels for some arches > > Best regards, > Andreas > Please, avoid html mail; our patchwork did not even catch it: https://patchwork.ozlabs.org/project/buildroot/list/ Next time, please use "git send-email", which sends patches in a format ready to be digested to be applied easily. Regards, Yann E. MORIN. > > > > > Hi all,
    >
    > we are not sure if this is even a bug, but > BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via > 'menuconfig' without setting a string for the bool value.
    >
    > --- a/package/dhcpcd/Config.in
    > +++ b/package/dhcpcd/Config.in
    > @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD
    > ?if BR2_PACKAGE_DHCPCD
    > ?
    > ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP
    > -?????? bool
    > +?????? bool "enable privilege separation"
    > ??????? default y
    > ??????? depends on BR2_USE_MMU
    > ??????? # Audit headers were only added in recent kernels for some > arches
    >
    > Best regards,
    > Andreas
    >
    >     > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 19:33:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:33:21 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <87tu49o3ay.fsf@dell.be.48ers.dk> References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> <8735bup3qe.fsf@dell.be.48ers.dk> <87tu49o3ay.fsf@dell.be.48ers.dk> Message-ID: <20221014193321.GE2503@scaer> Peter, All, On 2022-10-12 10:26 +0200, Peter Korsgaard spake thusly: > >>>>> "Peter" == Peter Korsgaard writes: > >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > >> This is currently the latest version in the v16.x branch. > > Committed to 2022.08.x, thanks. > I forgot to mention that this should have been marked as a security bump > given the security fixes it contains: Hrm... Aren't all nodejs version bumps security fixes? ;-] Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From mmayer at broadcom.com Fri Oct 14 19:54:43 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 12:54:43 -0700 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014191846.GC2503@scaer> References: <20221014172013.758628-1-mmayer@broadcom.com> <20221014191846.GC2503@scaer> Message-ID: On Fri, 14 Oct 2022 at 12:18, Yann E. MORIN wrote: > > @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS > > > > comment "mmc-utils needs a toolchain w/ headers >= 3.0" > > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > > + > > +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS > > + bool "Enable dangerous commands" > > + depends on BR2_PACKAGE_MMC_UTILS > > + help > > + Enable support for dangerous commands in mmc-utils. mmc-utils > > + considers turning on permanent write protection on a device a > > + "dangerous command" and doesn't offer it by default. > > Sub-options must immediately follow the main option, or the indentation > is not correct. > > We also prefer if-endif blocks when introducing new sub-options, for > consistency across the code base. Gotcha. > Applied to master with the above two changes, thanks. Thanks for the fixup. Regards, -Markus From yann.morin.1998 at free.fr Fri Oct 14 20:06:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:06:38 +0200 Subject: [Buildroot] [git commit] package/iwd: no autoreconfigure Message-ID: <20221014200810.8465186D2E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1db79dffcae63dbed021143203f1908f3f7db33f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 4a818f0b82..297e1fabe9 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From yann.morin.1998 at free.fr Fri Oct 14 20:08:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:08:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure In-Reply-To: References: Message-ID: <20221014200848.GF2503@scaer> Daniel, All, On 2022-10-13 15:03 +0000, Lang Daniel via buildroot spake thusly: > configure.ac is no longer patched, autoreconfigure isn't needed. I've reworded to reference ff0d53405157, when we dropped the configure.ac patch. > Signed-off-by: Daniel Lang Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/iwd/iwd.mk | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 8497fd1141..fe79704641 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING > IWD_CPE_ID_VENDOR = intel > IWD_CPE_ID_PRODUCT = inet_wireless_daemon > IWD_SELINUX_MODULES = networkmanager > -# We're patching configure.ac > -IWD_AUTORECONF = YES > > IWD_CONF_OPTS = \ > --disable-manual-pages \ > -- > 2.25.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 14 20:09:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 14:09:18 -0600 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package Message-ID: <20221014200918.2816609-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- Changes v1 -> v2: - update to latest 5.11.2.1 version fixing issues on latest kernel --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/rtl8192eu/Config.in create mode 100644 package/rtl8192eu/rtl8192eu.hash create mode 100644 package/rtl8192eu/rtl8192eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..0a3ecee2eb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1404,6 +1404,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..e2ea999d60 100644 --- a/package/Config.in +++ b/package/Config.in @@ -576,6 +576,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..f616def194 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 75b523ff1cda54d7cd8734a043b2d145231ab81fcc13d3edcd80e00d59201409 rtl8192eu-1e15b6d451731bc4d3ffd587194dc4bd0f286ac0.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..0e8ffea5cb --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 1e15b6d451731bc4d3ffd587194dc4bd0f286ac0 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) -- 2.34.1 From yann.morin.1998 at free.fr Fri Oct 14 20:10:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:10:50 +0200 Subject: [Buildroot] [PATCH 1/2] package/iwd: drop dbus check In-Reply-To: References: Message-ID: <20221014201050.GG2503@scaer> Daniel, All, On 2022-10-13 15:01 +0000, Lang Daniel via buildroot spake thusly: > Since 6f5f6bcd8 dbus is selected when iwd is selected. > > Signed-off-by: Daniel Lang > --- > package/iwd/iwd.mk | 13 ++++--------- > 1 file changed, 4 insertions(+), 9 deletions(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index fc10c5f1d4..8497fd1141 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -17,15 +17,10 @@ IWD_AUTORECONF = YES > > IWD_CONF_OPTS = \ > --disable-manual-pages \ > - --enable-external-ell > -IWD_DEPENDENCIES = ell > - > -ifeq ($(BR2_PACKAGE_DBUS),y) > -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share > -IWD_DEPENDENCIES += dbus > -else > -IWD_CONF_OPTS += --disable-dbus-policy > -endif > + --enable-external-ell \ > + --enable-dbus-policy \ > + --with-dbus-datadir=/usr/share > +IWD_DEPENDENCIES = ell dbus Why keep a build-time dependency on dbus, if it really is a runtime dependency as noted in Config.in ? Can you double-check that iwd does not end up linked to libdbus? Then, send an update: either drop the build dependency if it really is a runtiem one, or fix the Config.in comment if it is still needed at build time. Regards, Yann E. MORIN. > ifeq ($(BR2_PACKAGE_READLINE),y) > # iwd client depends on readline (GPL-3.0+) > -- > 2.25.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 20:18:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:18:40 +0200 Subject: [Buildroot] [git commit] package/glibc: fix make-4.4 compatibility Message-ID: <20221014202025.A4EE986D37@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b749d6dd7b5fc6cc8b85a316878721d42654759c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport a patch fixing compatibility with upcoming make 4.4. Fixes: - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...ix-MAKEFLAGS-assignment-for-upcoming-make.patch | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 100644 index 0000000000..0c82d7abbe --- /dev/null +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1,117 @@ +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 +From: Sergei Trofimovich +Date: Tue, 13 Sep 2022 13:39:13 -0400 +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 + [BZ# 29564] + +make-4.4 will add long flags to MAKEFLAGS variable: + + * WARNING: Backward-incompatibility! + Previously only simple (one-letter) options were added to the MAKEFLAGS + variable that was visible while parsing makefiles. Now, all options + are available in MAKEFLAGS. + +This causes locale builds to fail when long options are used: + + $ make --shuffle + ... + make -C localedata install-locales + make: invalid shuffle mode: '1662724426r' + +The change fixes it by passing eash option via whitespace and dashes. +That way option is appended to both single-word form and whitespace +separated form. + +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering +out --long-options. Otherwise options like --shuffle flag enable silent +mode unintentionally. $(silent-make) variable consolidates the checks. + +Resolves: BZ# 29564 + +CC: Paul Smith +CC: Siddhesh Poyarekar +Signed-off-by: Sergei Trofimovich +Reviewed-by: Siddhesh Poyarekar +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +2d7ed98add14f75041499ac189696c9bd3d757fe] +--- + Makeconfig | 18 +++++++++++++++++- + Makerules | 4 ++-- + elf/rtld-Rules | 2 +- + 3 files changed, 20 insertions(+), 4 deletions(-) + +diff --git a/Makeconfig b/Makeconfig +index f8164a0025..842f49eb58 100644 +--- a/Makeconfig ++++ b/Makeconfig +@@ -43,6 +43,22 @@ else + $(error objdir must be defined by the build-directory Makefile) + endif + ++# Did we request 'make -s' run? "yes" or "no". ++# Starting from make-4.4 MAKEFLAGS now contains long ++# options like '--shuffle'. To detect presence of 's' ++# we pick first word with short options. Long options ++# are guaranteed to come after whitespace. We use '-' ++# prefix to always have a word before long options ++# even if no short options were passed. ++# Typical MAKEFLAGS values to watch for: ++# "rs --shuffle=42" (silent) ++# " --shuffle" (not silent) ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) ++silent-make := no ++else ++silent-make := yes ++endif ++ + # Root of the sysdeps tree. + sysdep_dir := $(..)sysdeps + export sysdep_dir := $(sysdep_dir) +@@ -917,7 +933,7 @@ endif + # umpteen zillion filenames along with it (we use `...' instead) + # but we don't want this echoing done when the user has said + # he doesn't want to see commands echoed by using -s. +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s ++ifeq ($(silent-make),yes) # if -s + +cmdecho := echo >/dev/null + else # not -s + +cmdecho := echo +diff --git a/Makerules b/Makerules +index d1e139d03c..09c0cf8357 100644 +--- a/Makerules ++++ b/Makerules +@@ -794,7 +794,7 @@ endif + # Maximize efficiency by minimizing the number of rules. + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. + # Don't define any builtin rules. +-MAKEFLAGS := $(MAKEFLAGS)r ++MAKEFLAGS := $(MAKEFLAGS) -r + + # Generic rule for making directories. + %/: +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +diff --git a/elf/rtld-Rules b/elf/rtld-Rules +index ca00dd1fe2..3c5e273f2b 100644 +--- a/elf/rtld-Rules ++++ b/elf/rtld-Rules +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ + mv -f $@T $@ + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +-- +2.34.1 + From yann.morin.1998 at free.fr Fri Oct 14 20:26:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:26:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility In-Reply-To: <20221010003515.796446-1-james.hilliard1@gmail.com> References: <20221010003515.796446-1-james.hilliard1@gmail.com> Message-ID: <20221014202611.GH2503@scaer> James, All, On 2022-10-09 18:35 -0600, James Hilliard spake thusly: > Backport a patch fixing compatibility with upcoming make 4.4. > > Fixes: > - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 > - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 > - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 > > Signed-off-by: James Hilliard Applied to master, thanks. I'm afraid we'll get more packages that will suffer from that, but it at least looks like our own Makefile is immune to it: QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) which seems to be the only place we act on MAKEFLAGS. Hmm Or maybe not, after all. Can we have somthing like: --some-option=some-string which can be written as: --some-option some-string in which case our code would hit the "some-string" and interpret it as silent... Regards, Yann E. MORIN. > --- > ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ > 1 file changed, 117 insertions(+) > create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > new file mode 100644 > index 0000000000..0c82d7abbe > --- /dev/null > +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > @@ -0,0 +1,117 @@ > +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 > +From: Sergei Trofimovich > +Date: Tue, 13 Sep 2022 13:39:13 -0400 > +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 > + [BZ# 29564] > + > +make-4.4 will add long flags to MAKEFLAGS variable: > + > + * WARNING: Backward-incompatibility! > + Previously only simple (one-letter) options were added to the MAKEFLAGS > + variable that was visible while parsing makefiles. Now, all options > + are available in MAKEFLAGS. > + > +This causes locale builds to fail when long options are used: > + > + $ make --shuffle > + ... > + make -C localedata install-locales > + make: invalid shuffle mode: '1662724426r' > + > +The change fixes it by passing eash option via whitespace and dashes. > +That way option is appended to both single-word form and whitespace > +separated form. > + > +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering > +out --long-options. Otherwise options like --shuffle flag enable silent > +mode unintentionally. $(silent-make) variable consolidates the checks. > + > +Resolves: BZ# 29564 > + > +CC: Paul Smith > +CC: Siddhesh Poyarekar > +Signed-off-by: Sergei Trofimovich > +Reviewed-by: Siddhesh Poyarekar > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +2d7ed98add14f75041499ac189696c9bd3d757fe] > +--- > + Makeconfig | 18 +++++++++++++++++- > + Makerules | 4 ++-- > + elf/rtld-Rules | 2 +- > + 3 files changed, 20 insertions(+), 4 deletions(-) > + > +diff --git a/Makeconfig b/Makeconfig > +index f8164a0025..842f49eb58 100644 > +--- a/Makeconfig > ++++ b/Makeconfig > +@@ -43,6 +43,22 @@ else > + $(error objdir must be defined by the build-directory Makefile) > + endif > + > ++# Did we request 'make -s' run? "yes" or "no". > ++# Starting from make-4.4 MAKEFLAGS now contains long > ++# options like '--shuffle'. To detect presence of 's' > ++# we pick first word with short options. Long options > ++# are guaranteed to come after whitespace. We use '-' > ++# prefix to always have a word before long options > ++# even if no short options were passed. > ++# Typical MAKEFLAGS values to watch for: > ++# "rs --shuffle=42" (silent) > ++# " --shuffle" (not silent) > ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) > ++silent-make := no > ++else > ++silent-make := yes > ++endif > ++ > + # Root of the sysdeps tree. > + sysdep_dir := $(..)sysdeps > + export sysdep_dir := $(sysdep_dir) > +@@ -917,7 +933,7 @@ endif > + # umpteen zillion filenames along with it (we use `...' instead) > + # but we don't want this echoing done when the user has said > + # he doesn't want to see commands echoed by using -s. > +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s > ++ifeq ($(silent-make),yes) # if -s > + +cmdecho := echo >/dev/null > + else # not -s > + +cmdecho := echo > +diff --git a/Makerules b/Makerules > +index d1e139d03c..09c0cf8357 100644 > +--- a/Makerules > ++++ b/Makerules > +@@ -794,7 +794,7 @@ endif > + # Maximize efficiency by minimizing the number of rules. > + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. > + # Don't define any builtin rules. > +-MAKEFLAGS := $(MAKEFLAGS)r > ++MAKEFLAGS := $(MAKEFLAGS) -r > + > + # Generic rule for making directories. > + %/: > +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r > + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) > + > + # Use the verbose option of ar and tar when not running silently. > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > ++ifeq ($(silent-make),no) # if not -s > + verbose := v > + else # -s > + verbose := > +diff --git a/elf/rtld-Rules b/elf/rtld-Rules > +index ca00dd1fe2..3c5e273f2b 100644 > +--- a/elf/rtld-Rules > ++++ b/elf/rtld-Rules > +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ > + mv -f $@T $@ > + > + # Use the verbose option of ar and tar when not running silently. > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > ++ifeq ($(silent-make),no) # if not -s > + verbose := v > + else # -s > + verbose := > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Fri Oct 14 21:07:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:07:03 +0200 Subject: [Buildroot] [git commit] package/agent-proxy: new package Message-ID: <20221014210818.985F186D4E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b69fe70c264fc2eda79b36a5d96e5cb1b900ad7b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Rufus Segar Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in.host | 1 + package/agent-proxy/Config.in.host | 11 +++++++++++ package/agent-proxy/agent-proxy.hash | 3 +++ package/agent-proxy/agent-proxy.mk | 20 ++++++++++++++++++++ 5 files changed, 38 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..c0e6f8bbef 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2569,6 +2569,9 @@ F: support/testing/tests/package/test_glxinfo.py F: support/testing/tests/package/test_openssh.py F: toolchain/ +N: Rufus Segar +F: package/agent-proxy/ + N: Ryan Wilkins F: package/biosdevname/ diff --git a/package/Config.in.host b/package/Config.in.host index 84517787cc..d6b9ee0e2d 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -2,6 +2,7 @@ menu "Host utilities" source "package/abootimg/Config.in.host" source "package/aespipe/Config.in.host" + source "package/agent-proxy/Config.in.host" source "package/android-tools/Config.in.host" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" diff --git a/package/agent-proxy/Config.in.host b/package/agent-proxy/Config.in.host new file mode 100644 index 0000000000..80328790ad --- /dev/null +++ b/package/agent-proxy/Config.in.host @@ -0,0 +1,11 @@ +config BR2_PACKAGE_HOST_AGENT_PROXY + bool "host agent-proxy" + help + This is a simple, small proxy which was intended for use + with kgdb, or gdbserver type connections where you want to + share a text console and a debug session. + + The idea is that you use the agent-proxy to connect to a + serial port directly or to a remote terminal server. + + git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash new file mode 100644 index 0000000000..bd0e814d20 --- /dev/null +++ b/package/agent-proxy/agent-proxy.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk new file mode 100644 index 0000000000..46108aef02 --- /dev/null +++ b/package/agent-proxy/agent-proxy.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# agent-proxy +# +################################################################################ + +AGENT_PROXY_VERSION = agent-proxy-1.97 +AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_LICENSE = GPL-2.0 +AGENT_PROXY_LICENSE_FILES = COPYING + +define HOST_AGENT_PROXY_BUILD_CMDS + $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) +endef + +define HOST_AGENT_PROXY_INSTALL_CMDS + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(HOST_DIR)/bin/agent-proxy +endef + +$(eval $(host-generic-package)) From thomas.petazzoni at bootlin.com Fri Oct 14 21:11:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:11:47 +0200 Subject: [Buildroot] [PATCH 1/1] package: add agent-proxy target and host packages In-Reply-To: <20220507161338.2125859-1-rhs@riseup.net> References: <20220507161338.2125859-1-rhs@riseup.net> Message-ID: <20221014231147.05459ac1@windsurf> Hello Rugus, On Sat, 7 May 2022 17:13:37 +0100 Rufus Segar wrote: > Signed-off-by: Rufus Segar Thanks a lot for your contribution. Believe it or not, but after some many months, I finally took the time to review and apply your patch. However, I did quite a few changes: - I kept only the host variant of the package. Indeed, my understanding is that agent-proxy is meant to be executed on the developer workstation to de-multiplex the kgdb traffic from the console traffic. Therefore it was not clear why a target variant was needed. Of course, if additional justification/explanation is given, the target variant can be re-added via a follow-up patch. - Addition of an entry in the DEVELOPERS file - Addition of a .hash file with the hash of the tarball and hash of the COPYING file. See below for some other comments. > +AGENT_PROXY_VERSION = agent-proxy-1.97 > +AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git > +AGENT_PROXY_LICENSE = GPL-2.0+ This was not correct: the license is GPL-2.0 only. > +AGENT_PROXY_LICENSE_FILES = COPYING > + > +define AGENT_PROXY_BUILD_CMDS > + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all > +endef > + > +define AGENT_PROXY_INSTALL_STAGING_CMDS > + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(STAGING_DIR)/usr/bin This had not effect since AGENT_PROXY_INSTALL_STAGING is not set to YES. But anyway, I dropped this since I dropped the target variant; > +endef > + > +define AGENT_PROXY_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(TARGET_DIR)/usr/bin > +endef > + > +define HOST_AGENT_PROXY_BUILD_CMDS > + $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) > +endef > + > +define HOST_AGENT_PROXY_INSTALL_CMDS > + $(HOST_CONFIGURE_OPTS) $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(HOST_DIR)/bin $(HOST_CONFIGURE_OPTS) not needed here, and we want the full destination path as the last argument, i.e $(HOST_DIR)/bin/agent-proxy. Once again, thanks a lot for this contribution! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 14 21:14:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:14:22 +0200 Subject: [Buildroot] [PATCH 1/1] package: add kdmx target and host packages In-Reply-To: <20220507161338.2125859-2-rhs@riseup.net> References: <20220507161338.2125859-1-rhs@riseup.net> <20220507161338.2125859-2-rhs@riseup.net> Message-ID: <20221014231422.652a2ef6@windsurf> Hello Rufus, On Sat, 7 May 2022 17:13:38 +0100 Rufus Segar wrote: > Signed-off-by: Rufus Segar > --- > package/Config.in | 1 + > package/Config.in.host | 1 + > package/kdmx/Config.in | 12 ++++++++++++ > package/kdmx/Config.in.host | 12 ++++++++++++ > package/kdmx/kdmx.mk | 33 +++++++++++++++++++++++++++++++++ > 5 files changed, 59 insertions(+) > create mode 100644 package/kdmx/Config.in > create mode 100644 package/kdmx/Config.in.host > create mode 100644 package/kdmx/kdmx.mk Thanks a lot for your proposal! I'm a bit confused by the difference between agent-proxy and kdmx. Could you clarify? Also, kdmx is part of the agent-proxy code-base. So instead of being a separate package in Buildroot, the existing agent-proxy package should be extended to allow the build/installation or either agent-proxy or kdmx, or both. Could you have a look into this? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From judge.packham at gmail.com Fri Oct 14 21:17:25 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sat, 15 Oct 2022 10:17:25 +1300 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 In-Reply-To: <875ygmlckj.fsf@dell.be.48ers.dk> References: <20221002004931.1805825-1-judge.packham@gmail.com> <875ygmlckj.fsf@dell.be.48ers.dk> Message-ID: On Sat, 15 Oct 2022, 3:11 AM Peter Korsgaard, wrote: > >>>>> "Chris" == Chris Packham writes: > > > This is a bug fix release. The changes are: > > - extmod/machine_i2c: only use WRITE1 option if transfer supports it > > > This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it > > writes the address to read from. > > > Signed-off-by: Chris Packham > > Committed, thanks. > > Does this mean that it also needs to be backported to 2022.08.x? If this > is an esp32-only issue then presumably not? > No I don't think it needs to be backported. > > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: From judge.packham at gmail.com Fri Oct 14 21:18:29 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sat, 15 Oct 2022 10:18:29 +1300 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <871qralciz.fsf@dell.be.48ers.dk> References: <20221002004931.1805825-1-judge.packham@gmail.com> <20221002004931.1805825-2-judge.packham@gmail.com> <871qralciz.fsf@dell.be.48ers.dk> Message-ID: On Sat, 15 Oct 2022, 3:12 AM Peter Korsgaard, wrote: > >>>>> "Chris" == Chris Packham writes: > > > Add new version. Remove patch that has been applied upstream. Update > > hash for COPYING as it's text has changed to clarify some details but > > the license remains LGP-2.0+L/GPL-2.0+. > > > Signed-off-by: Chris Packham > > --- > > ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- > > package/syslog-ng/syslog-ng.hash | 4 +- > > package/syslog-ng/syslog-ng.mk | 2 +- > > Don't you need to update the version in syslog-ng.conf as well? > Oh yes of course. I'll submit a v2 soon. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Fri Oct 14 22:04:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:04:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/agent-proxy: fix AGENT_PROXY_VERSION Message-ID: <20221014220417.7167-1-fontaine.fabrice@gmail.com> Make AGENT_PROXY_VERSION compliant with release-monitoring.org Signed-off-by: Fabrice Fontaine --- package/agent-proxy/agent-proxy.hash | 2 +- package/agent-proxy/agent-proxy.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash index bd0e814d20..685dd4fbaf 100644 --- a/package/agent-proxy/agent-proxy.hash +++ b/package/agent-proxy/agent-proxy.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 b1667b36074c10ebd6dd1f89eda75d5877bc8e06ecf2919f18e75a7a5a9de19b agent-proxy-1.97.tar.gz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk index 46108aef02..c8844ccbf1 100644 --- a/package/agent-proxy/agent-proxy.mk +++ b/package/agent-proxy/agent-proxy.mk @@ -4,8 +4,8 @@ # ################################################################################ -AGENT_PROXY_VERSION = agent-proxy-1.97 -AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_VERSION = 1.97 +AGENT_PROXY_SITE = https://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git/snapshot AGENT_PROXY_LICENSE = GPL-2.0 AGENT_PROXY_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 14 22:07:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:07:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 Message-ID: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 14 22:20:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:20:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 Message-ID: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 14 23:09:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 17:09:05 -0600 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring Message-ID: <20221014230905.3091021-1-james.hilliard1@gmail.com> Make recommends using this technique for identifying short options. >From make NEWS for upcoming version 4.4: Previously only simple (one-letter) options were added to the MAKEFLAGS variable that was visible while parsing makefiles. Now, all options are available in MAKEFLAGS. If you want to check MAKEFLAGS for a one-letter option, expanding "$(firstword -$(MAKEFLAGS))" is a reliable way to return the set of one-letter options which can be examined via findstring, etc. Signed-off-by: James Hilliard --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..2d31fd45fa 100644 --- a/Makefile +++ b/Makefile @@ -434,7 +434,7 @@ PACKAGES := PACKAGES_ALL := # silent mode requested? -QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) # Strip off the annoying quoting ARCH := $(call qstrip,$(BR2_ARCH)) -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 00:56:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 18:56:11 -0600 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 Message-ID: <20221015005611.4054933-1-james.hilliard1@gmail.com> Make 4.4 introduces a shuffle mode which randomizes prerequisites in order to better flush out issues with parallel builds, as this mode randomizes prerequisites even when using -j1 builds we must instead explicitely mark parallel incompatible builds using the .NOTPARALLEL special target which disables prerequisites randomization when running in shuffle mode. Signed-off-by: James Hilliard --- package/Makefile.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..2327849a1f 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -17,7 +17,7 @@ else PARALLEL_JOBS := $(BR2_JLEVEL) endif -MAKE1 := $(HOSTMAKE) -j1 +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: override MAKE = $(HOSTMAKE) \ $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 00:58:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 18:58:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build Message-ID: <20221015005813.4055238-1-james.hilliard1@gmail.com> The bearssl package is not compatible with parallel builds. Fixes: - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 Signed-off-by: James Hilliard --- package/bearssl/bearssl.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk index ff5f4e87b7..c2a5760af5 100644 --- a/package/bearssl/bearssl.mk +++ b/package/bearssl/bearssl.mk @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib endif define BEARSSL_BUILD_CMDS - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ $(BEARSSL_TARGETS) endef -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 01:16:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 21:16:14 -0400 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility In-Reply-To: <20221014202611.GH2503@scaer> References: <20221010003515.796446-1-james.hilliard1@gmail.com> <20221014202611.GH2503@scaer> Message-ID: On Fri, Oct 14, 2022 at 4:26 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-09 18:35 -0600, James Hilliard spake thusly: > > Backport a patch fixing compatibility with upcoming make 4.4. > > > > Fixes: > > - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 > > - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 > > - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 > > > > Signed-off-by: James Hilliard > > Applied to master, thanks. > > I'm afraid we'll get more packages that will suffer from that, but it > at least looks like our own Makefile is immune to it: > > QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) > > which seems to be the only place we act on MAKEFLAGS. > > Hmm Or maybe not, after all. Can we have somthing like: > > --some-option=some-string > which can be written as: > --some-option some-string > > in which case our code would hit the "some-string" and interpret it as > silent... This should fix any issues with QUIET: https://patchwork.ozlabs.org/project/buildroot/patch/20221014230905.3091021-1-james.hilliard1 at gmail.com/ Also MAKE1 is broken, this should fix it: https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > > --- > > ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ > > 1 file changed, 117 insertions(+) > > create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > > > diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > new file mode 100644 > > index 0000000000..0c82d7abbe > > --- /dev/null > > +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > @@ -0,0 +1,117 @@ > > +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 > > +From: Sergei Trofimovich > > +Date: Tue, 13 Sep 2022 13:39:13 -0400 > > +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 > > + [BZ# 29564] > > + > > +make-4.4 will add long flags to MAKEFLAGS variable: > > + > > + * WARNING: Backward-incompatibility! > > + Previously only simple (one-letter) options were added to the MAKEFLAGS > > + variable that was visible while parsing makefiles. Now, all options > > + are available in MAKEFLAGS. > > + > > +This causes locale builds to fail when long options are used: > > + > > + $ make --shuffle > > + ... > > + make -C localedata install-locales > > + make: invalid shuffle mode: '1662724426r' > > + > > +The change fixes it by passing eash option via whitespace and dashes. > > +That way option is appended to both single-word form and whitespace > > +separated form. > > + > > +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering > > +out --long-options. Otherwise options like --shuffle flag enable silent > > +mode unintentionally. $(silent-make) variable consolidates the checks. > > + > > +Resolves: BZ# 29564 > > + > > +CC: Paul Smith > > +CC: Siddhesh Poyarekar > > +Signed-off-by: Sergei Trofimovich > > +Reviewed-by: Siddhesh Poyarekar > > +Signed-off-by: James Hilliard > > +[james.hilliard1 at gmail.com: backport from upstream commit > > +2d7ed98add14f75041499ac189696c9bd3d757fe] > > +--- > > + Makeconfig | 18 +++++++++++++++++- > > + Makerules | 4 ++-- > > + elf/rtld-Rules | 2 +- > > + 3 files changed, 20 insertions(+), 4 deletions(-) > > + > > +diff --git a/Makeconfig b/Makeconfig > > +index f8164a0025..842f49eb58 100644 > > +--- a/Makeconfig > > ++++ b/Makeconfig > > +@@ -43,6 +43,22 @@ else > > + $(error objdir must be defined by the build-directory Makefile) > > + endif > > + > > ++# Did we request 'make -s' run? "yes" or "no". > > ++# Starting from make-4.4 MAKEFLAGS now contains long > > ++# options like '--shuffle'. To detect presence of 's' > > ++# we pick first word with short options. Long options > > ++# are guaranteed to come after whitespace. We use '-' > > ++# prefix to always have a word before long options > > ++# even if no short options were passed. > > ++# Typical MAKEFLAGS values to watch for: > > ++# "rs --shuffle=42" (silent) > > ++# " --shuffle" (not silent) > > ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) > > ++silent-make := no > > ++else > > ++silent-make := yes > > ++endif > > ++ > > + # Root of the sysdeps tree. > > + sysdep_dir := $(..)sysdeps > > + export sysdep_dir := $(sysdep_dir) > > +@@ -917,7 +933,7 @@ endif > > + # umpteen zillion filenames along with it (we use `...' instead) > > + # but we don't want this echoing done when the user has said > > + # he doesn't want to see commands echoed by using -s. > > +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s > > ++ifeq ($(silent-make),yes) # if -s > > + +cmdecho := echo >/dev/null > > + else # not -s > > + +cmdecho := echo > > +diff --git a/Makerules b/Makerules > > +index d1e139d03c..09c0cf8357 100644 > > +--- a/Makerules > > ++++ b/Makerules > > +@@ -794,7 +794,7 @@ endif > > + # Maximize efficiency by minimizing the number of rules. > > + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. > > + # Don't define any builtin rules. > > +-MAKEFLAGS := $(MAKEFLAGS)r > > ++MAKEFLAGS := $(MAKEFLAGS) -r > > + > > + # Generic rule for making directories. > > + %/: > > +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r > > + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) > > + > > + # Use the verbose option of ar and tar when not running silently. > > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > > ++ifeq ($(silent-make),no) # if not -s > > + verbose := v > > + else # -s > > + verbose := > > +diff --git a/elf/rtld-Rules b/elf/rtld-Rules > > +index ca00dd1fe2..3c5e273f2b 100644 > > +--- a/elf/rtld-Rules > > ++++ b/elf/rtld-Rules > > +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ > > + mv -f $@T $@ > > + > > + # Use the verbose option of ar and tar when not running silently. > > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > > ++ifeq ($(silent-make),no) # if not -s > > + verbose := v > > + else # -s > > + verbose := > > +-- > > +2.34.1 > > + > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sat Oct 15 05:42:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 15 Oct 2022 05:42:16 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-14 Message-ID: <20221015054224.82EF44014C@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-14 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 5 | 0 | 17 | 2022.08.x | 12 | 11 | 0 | 23 | master | 83 | 654 | 18 | 755 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 273 host-gcc-initial-11.3.0 | 29 bearssl-0.6 | 20 ca-certificates-20211016 | 20 slang-2.3.2 | 19 brltty | 18 host-binutils-2.38 | 17 coremark-pro-1.1.2743 | 16 berkeleydb-5.3.28 | 15 libnss-3.83 | 13 host-f2fs-tools-1.15.0 | 11 igd2-for-linux-2.1 | 11 dieharder-3.31.1 | 7 host-gcc-initial-12.2.0 | 7 host-go-1.19.1 | 7 host-sentry-cli-1.59.0 | 6 libee-0.4.1 | 6 sdl-1.2.15 | 6 host-gcc-initial-10.4.0 | 5 libglib2-2.72.3 | 5 crun-1.5 | 4 dmraid-1.0.0.rc16-3 | 4 host-binutils-2.37 | 4 host-pahole-73383b3a39afe86... | 4 systemd-250.4 | 4 autofs-5.1.8 | 3 dahdi-linux-5c840cf43838e06... | 3 efivar-38 | 3 fbset-2.1 | 3 gensio-2.5.5 | 3 gmp-6.2.1 | 3 host-binutils-2.39 | 3 host-gcc-final-11.3.0 | 3 libcurl-7.84.0 | 3 linux-6.0 | 3 netsurf-3.10 | 3 openssh-legal-info | 3 sysvinit-2.99 | 3 toolchain-external-codescap... | 3 traceroute-2.1.0 | 3 vde2-2.3.2 | 3 batman-adv-2021.4 | 2 boost-1.80.0 | 2 dhcp-4.4.3 | 2 elfutils-0.186 | 2 fontconfig-2.13.1 | 2 frotz-2.54 | 2 host-berkeleydb-5.3.28 | 2 host-riscv-isa-sim-1.1.0 | 2 host-rust-1.64.0 | 2 libarchive-3.6.1 | 2 libnss-3.84 | 2 linuxptp-3.1.1 | 2 lxc-4.0.12 | 2 musepack-r475 | 2 nanocom-1.0 | 2 openswan-3.0.0 | 2 reaver-1.6.6 | 2 refpolicy-2.20220106 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 acpica-20220331 | 1 acpid-2.0.33 | 1 augeas-1.12.0 | 1 botan-2.19.2 | 1 btrfs-progs-5.16.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 collectd-5.12.0 | 1 crucible-2022.05.25 | 1 dash-0.5.11.5 | 1 dropbear-2022.82 | 1 expat-2.4.9 | 1 f2fs-tools-1.15.0 | 1 ffmpeg-4.4.2 | 1 file-5.41 | 1 freeradius-server-3.2.0 | 1 gdb-11.2 | 1 gerbera-1.10.0 | 1 gmrender-resurrect-0.0.9 | 1 google-breakpad-c85eb4a59b6... | 1 gpm-1.20.7 | 1 gsl-2.6 | 1 heirloom-mailx-12.5 | 1 host-gauche-0.9.12 | 1 host-gcc-final-10.4.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-protobuf-c-1.4.1 | 1 jack2-1.9.20 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libglvnd-1.4.0 | 1 libqb-2.0.6 | 1 libsvgtiny-ea9d99fc8b231c22... | 1 lighttpd-1.4.67 | 1 linux-5.10.145-cip17 | 1 ltp-testsuite-20220930 | 1 make: *** wait: No child pr... | 1 mariadb-10.3.36 | 1 mender-3.4.0 | 1 mimic-1.1.0 | 1 musl-1.2.3 | 1 netsniff-ng-0.6.8 | 1 olsr-0.9.8 | 1 open62541-v1.3.3 | 1 openblas-0.3.21 | 1 openssh-9.0p1 | 1 quickjs-2021-03-27 | 1 snmppp-3.4.10 | 1 uclibc-1.0.42 | 1 umtprd-1.6.2 | 1 volk-2.5.2 | 1 wolfssl-5.5.1 | 1 xz-5.2.7 | 1 zabbix-5.4.9 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f1baec73a949864679703688a42fd7e05ff42e1e | mips64el | acpica-20220331 | NOK | http://autobuild.buildroot.net/results/ca0b40fc483015afd27827d60d904dfd6a0d8e80 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/918b883f334b24031f5253bcae2d82b34ab743c7 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/abdd41a13912708d212203361b09164fe322054f | ORPH armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f278d849fd2acef373d5774543f94a4a3a5fb593 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/69343902c4b129451073287f09d75c4f52770ccb | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/faf95b325436430290de3202f2c72bb2aaf90a86 | aarch64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/f01073614b3786fd9fc719462daf188e81ab5d8b | aarch64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4023f7a2b046a1b4f5a29951b1fe6f201518cf4a | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6d9d7f1e7da819e60899bfb454cf8853cbf02d20 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0607156477da188aded3bc4afe1a2f8d2fd33c62 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2e8098a988b8bb774bc1771ec3baff5a68833c01 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f6d5b819ac0d1e13e054242c11262e95add6750 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/323ef854838e1ddf80974d1b9547426e4f987e06 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e532b99dba5a09418b19ed020b769f706a4c082c | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1f9a726d54f685218b3187787e53b804160b0589 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f99a94978e3d22cad5e5fb34fccca49a9ff6058 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4a6b262a7b710106e1f43980bfa1aa04221c6fbc | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b23eb4d079bd63fc108ccac862d20b93052312e3 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/267e9e6a22da9c71bc69161f586ff7d8ba52d2e1 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/400d1b709342998b1d3454fa16bd0b871f46dbd7 | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/068eb5555e15e0a029270c9a527bbd8b2f357a90 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/08142b13ad6f087d67a2b757ffeccaae14393e97 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/acc832abcf3cba12954d2a73b208702600bcbca5 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c75c528849520d903fc6271751e553ca289f3b9f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3a81a5b2a02bdaa724778d6cf69e56e38413b159 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1db027dbca40c35581c07812180c365246ab4879 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ccd637c672febb89ad15547a96d612636c9d5ad4 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b7ec6564ef86e87c7de78b8731b2d879f176e0c7 | sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d1865d66f2e97400d2b596c9eee2c26db1ad26a4 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c154f6dbc42bdba46fc33653258f6100e0769494 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4424f11d02e166ba0b77d40850b384ba978b9458 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a6168d801f66b5637f3dc6700ce93e4e649dd944 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1b50e186a10b3400c417616b337fa96853b68310 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e96f52579212e442536b235dca23a4ed53b884d4 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4fa3155643f274899627125e45ca1818c3ae070b | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/36c793bda3851827abb7d399d6c708737ed8c07a | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f3b476ccbf936de74149758b7baca6870a607fc7 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d991f69b47e4b05f57de586666c20ceac890f70 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/442aa2f13a3a8d3ec48ceac5214a3852667546ed | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2c8faa8b3a21b9a2d748360521bc3f77f2dbf179 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c26fd3dd1a41537b43f61d78344b93f83ea99805 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9b5ee356ca059e6b4b5cd8c574257f6aa88ab3e1 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d7ae9ad4d0ebf22a5d39f61903a75e9c45666d6 | ORPH arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/496c46ebc71aab3c205ba7e5a6e5680a3eb32019 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/7108f71915831b941f9ad953d09e83385c49d137 | aarch64_be | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/bb0a1c72e25a05fc5c23eed5d2823f5eb00e1ac7 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/8d97a937c64aae35c75b91c352d384d5557f4987 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/509138f7ba5f248ecf33ba47c17e17a209f19761 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/bafec897850252e0136e367f1936be99cf999783 | mips | brltty | TIM | http://autobuild.buildroot.net/results/2e4cc76aae638b328b90c1223876253eac3f554a | arceb | brltty | TIM | http://autobuild.buildroot.net/results/61c00f8b0d06d3397f8035edf9b75a600ecab5bb | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/58aaacbc802873d6e55f95cb55c9961b13e9e3a9 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/1097ec96cbca07ee746e97df4a62bc599348299f | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/b1f2367086f1c11800e087c52a95ab0a46b5a36f | or1k | brltty | TIM | http://autobuild.buildroot.net/results/4b2a4e9655d8c01599828d60eda5dbceb3100a02 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/1a47154e694a9aa16a6e04b1ca6dca2bb1830cf2 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/4633d8e656c6df3a89bd3b14b4de66a4ec9a2df8 | mips | brltty | TIM | http://autobuild.buildroot.net/results/49f27fe555e20009777aa574b77bcb89976a1752 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/a05c11583907836f96558639ac53a098fd96df85 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/bc642846946eca70cc59b3709d434fbcfb31cf5e | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/891364f3c5422f18054aff8616217faf60ba0977 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/f791ccc43d4cde458a0c61f4272e25a91b33aa59 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/a0a0cb2c6b29e667e07bb2b3c52c49a0d11c2a77 | m68k | brltty | TIM | http://autobuild.buildroot.net/results/08bfc6e78b1affa3ced485ec652392986e234916 | mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fa2d78216037128fe61e7db192f7e97bc308706e | ORPH aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/45248be80cfa2b16c822055a729094a56b548491 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9933a82308edc23823059ef1eb81213128b8b1c5 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/380dc5525cf27d9129b410652c4d3bd2b354274a | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8c153497afb1637e08d62d5c125d902ea48b00ba | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e70322928313c18d304349e6b93d2c7276f017af | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/675267f6502efd357f28e143a628e3b281a34bc4 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/326c572684edf521fd7d56025ef8e42e917b32bc | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5fb22a6d3316f5a538da3662c8c8a57053ce37c4 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/773d9e3ef65bc16923e3a481dad0dc793ffb4b15 | i686 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/58a7c72391b09bdc8b5c70f5f7eed62be57a0a9d | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c1d40ec663e5e5f9b58b5df22fa1eed00cca1025 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2a2103ea188990b525fb20ed4081631f6925b2d8 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/696efe4b0138936f8f45c73e3c008141ed49458a | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/577a919b4e137d3266fd3175bdca31293a5cc747 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/355f734cdc7bf401284090777d7e358a09b4f4fd | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0a15a45567ad9a4868d7df9085c8b29787d87a0c | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/64cf1f776ac02f88e16e8c34cbc387133630b7fe | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/84ebd29d7971ceea574f535e584afba4429999d3 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f0d255181aa081f3c2b20e42ac55c2dab1970ea0 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aed56dc53cf8327fc16bc34e2dc440ea2b7709b | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/177f38b48e1c0c590b7c2d017a776bc664a15507 | aarch64_be | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/1b0f0fe48b3ba348a248c40345b24a153c3ba79d | ORPH arm | collectd-5.12.0 | NOK | http://autobuild.buildroot.net/results/3b57c968dd2fa8d99bcba28e1baf8b519b800738 | i686 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4ffe46abed939a0cae82f43e07fb7bfc2ccdc348 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7302f102d4e3ca634b0266d8f9548b48028ee1bd | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3eb7393d8ff36a8890c8fbefe3b37881ec59c5db | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2754fac3c0b8208b12fb9f4f47b2973a5ff8dc23 | i686 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3518529f8933ff3048b3bd48b12a672b081f6ba9 | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fd3ee9666ddb3b10d6614bd45622ec8ff8b1935f | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5ed686457696d14ff68fbfc39e9e797734a757a5 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9ba639477b19f036efdd2e890408223e8f54030c | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f4da94659a221d6d9ae784c9a8d524cb0278cb4a | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/77a034bad922f90b70ece473a6d81e99b26af2cc | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b41fca485d82daefa813b29868605da6b9d61d20 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8ad3f8adb5c39e5c61c2b3fef94526e78afcde0f | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b5ded96bb44a96f6d3ef915f63395e1859358b62 | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/63ff2b88d3ce5c8a423f9eb3bab2ecd578d9cd71 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2095657d2a1e1c78bb0362d907df6d551f5f69f8 | powerpc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4743894bf68738fbcb978329e6863a6b6bb7512a | s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/3883dfaefd8bd05b082bd7a2c3af716b795642ca | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e0e73499ceef874ec28a635fe5bbb15628114add | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1defcea890fed1d531d16302551bad0627e19ace | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ee82df01b4b91ae66e08bcce9ced6a936e2f3ee8 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c86d9b09aa595498bbe7a5cfe7f05aa2364ce49b | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cb49eb413ad607db471b67ab70b3976c5d378a0b | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ce4fdfda2349c349cd71fda336ee8a475f8b6a3c | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/fd1221aa18ab1e883e0af5dd200ae24106f605f2 | xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/87c2e682f7083d20e3cb2454d7ed5dbb09e55566 | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/8367bebfe7e453f5c9c8f046b5885a675c210303 | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/e5241ef01392c127b3efb556c36e55bebb85901d | ORPH m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/fa33f1b68e4a9ed796d69230a7842ad86423aa9a | sparc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/537a63e6473c0692073ca6f0561e924016f9d9f8 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d749db0ee3a71b6c6a6b3644509e7e2f29e5b654 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/8d50baacd5cd95673c542e11de0930d66c35bfc0 | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e690516e4d73fcfd1306d9cc719f9b198d4090bc | nios2 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a6e088b0636512f62c1e1a9ed1b3d9f7dac2f127 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/1d92237afb3ae344c941b833b0bcc141ecdfe99c | microblazeel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/40467e1b5f956a45a973f3a3842e425a223aa4fa | ORPH or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/ef82f825d48909105b90a244a2cc4ece866192c6 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0327b7e3bcb956b75cd40a72b2000847f0bf6558 | ORPH mips | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/b876ba6a82904e0347e1b8f68584c3c99548e6e7 | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/edae8ab42443d4672d6e2774c9e8fb4b236e44b0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/8d8dd64adf0c2feaa69c461c4f4714fd528571c0 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/67731f24bf5a552523b675ebaa127e1f6c92e305 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/7c94ab97246f350cf6e53e08f5d4d67c718f1137 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/0a14e14391b7171adead1c7d3fcc77e57b676085 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4295369dff3c02c152050dcd0394bebc15772a77 | ORPH powerpc64le | expat-2.4.9 | NOK | http://autobuild.buildroot.net/results/85cb9b0c0ac0326e71f12f756325486c94bf8173 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0f724815dbd87cfb4839e102c0ba1f2752086d3 | m68k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b1fd47e37292e9ef03b19768b233326b45e1dc8b | ORPH microblazeel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/43768879fd125c4aad4321e9fe5707f2bc72d632 | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3ba836f81d11e59a107cc4d5e0068dc9aa9dd0dd | ORPH armeb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/190a5d9f7bbadf27fcd2f849a1e1b3819ec6b334 | arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/25adb49f552f156a5a58b028172741445e50d3fd | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/7a8004eb22b7da43348ad355c8ad55e4f743901a | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/e4ce3862481573b51d1ef53cceb2cfd60518642e | ORPH aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/9c7634c703917877faa530d094be1fc48695675c | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/00127456af2481ca58ce11672271bcfb50715c36 | armeb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/3a8994e7138660fa87281fbebb32712abc2350dc | mipsel | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/a94dea645cb65780196fc5ccf4b26df8befd1c64 | ORPH arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/eaf5599ded83d1f12a890387fabde174e795c527 | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e43a0fb738b98590549ba9e678278dfe477aa1dd | m68k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/168733747431233ea3036239cf67ff926a72a9a3 | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/7dd547a88ad5bd266038614e1fa8bd76355f10b6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad54da221e0bbad20d36b6f2a8488152ea240e2c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79b8e4a11902f60d7de39e4827e6de99ed3e5c1f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fcff5314d14297e0b3bd75e4672788502726842e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/73a51b00b3e71840084bd6386dc5843ba22c8bf7 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cbb3faca07a16007482bec40013ff9d144135d3 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7de7f7886b938dcdee7a5420d361969c813885ca | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1117d8d9d24f165412786ee226e8bb3971c0aef | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0549ea3731a3ac25eab2ce01b961cdbadbaf3a5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58af588a961ca584d2144067fcf24995a201691c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50d31527e5f72663a82d336c413a89de8cb6e499 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cb18a135dbccfa1411aabb130e8395f1e82b81a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe075d64a0213d0b10a8635d9014be5067deaf33 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8bbed46516e063e3f677f5c11971b6b7960ba8b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd576395bca9ae9d93e59517c878e57794046a2c | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33142db66ebe9a30759f0161bc9b9d77934c8b87 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0113088d5234346a569765b21b0d152716ac0de1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/098c82d8e8641b9ba1e02a25be94cbd80e289e92 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e46dd6091cd4ed9b7f02c590c85c8319aae3379d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe58169a0e8a9e66df20be6855b1ed6dc6332142 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1d9bca75c699bbd4093cea8535bd3a064381275 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c197409a9bb92454810fda29087c37d8d837ceab | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3eec57d4d6d77fa026492b723e44f119eb43299e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76083fc6a9312f39ee8de8ff012140b1ba5a0118 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e403cf3229e426c08e5dcb7c5ae7d89d8a349ad6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f74e91df35ff5ef603498693da3d390ba8ac5f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57b4b4fa6feb74cbe82c153e6b3f18cbb33836b5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d485dab5f5dea7d94ee35aa80a42a626cd5fe0eb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bf86aef75d39ddf0c6b99ecd06b75930ad0621a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecee4f2881c6a26122d0ef7d7fa3af173de73e2a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4677e333eb9c5625efa47621845cc4c2c23a17be | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5347bc313eb48b7973550e2c6c84c35d48365c68 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab6b70bf05d5348df9f5a2c06d360434eafaa47b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8f2af22807cb9ed725c536fe6d5a077d69c464c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/312c54e07dd7b42b2b88e01fa626cd87b17d77a2 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da87736e6ab9720cc55988122f0475115c519158 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9689e94f9c6874b8fbe43c7c07afbb4e0451792e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4809d6a86cf512a7864f0fe1461ba9c647dc9a06 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c6806646c0886baaaa4e8c58d9ce7b74b9660ae | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29ed89b94d33badad46257afc5f7c624b74be2ac | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab15f57d4c2b246e481fe16079870f6c999a783e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f0f77eefbeb3e919ee3f19daf67c87ec3028bdd | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54d06259cdc86a8bdfb9494c99d5903fb7244775 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaea4b844624b5afc68c8170e2f1fa4d6632bc3a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3a02865a17906ba79f2b687ac07b5ddc4bdef6f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bd4b91de1dc139394559aba0c08e37a3ed4c27b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/210f907633eb31371ead59f1ce0fff55b0920da3 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d895fcca19059742e0773a9e53b4df14067b4966 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b363be00a86e56fb7145b93d7f9d6d42f735c71 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46229caf79ad4f1ec5f774e4a60304f2f22830e2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0553adf6a88d02585e40e8f77d24a379e3b9b1a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/899e69c29e91e59fbcdf9e5adc84d7ca6e7a7e18 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3723577c8f5a1e21368f7958ab1889d5eb790141 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc1b5a1c4b44122ab19fbb5f65beba2787189aae | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/294c2cd71ae6d10333f53056d3b8f487e0b5d3af | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/533ed47246e4c196467b849430c3fac88ea54750 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe5f85c446193111d4f4ff7cbf09ae37081ac139 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a782ac9d17aca9d9bfa55c0ba1a721d1997ef283 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ac501611ed8ed97d153b41679375a2d89141d63 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27e9a3fa57528c1a5a4a87d62b30ef8f0cea25c8 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4f89380b9cf8edf49cb2c8578590557a4928b4b9 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cd0267c581c6c206f27d3071c46c16fba17ed9b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2414e4644656db22df8ba9e64a2d1009b975ab3 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10b961235784b0c2d0bd8d1cfd83d64f319a147d | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9f54e7f4f23400ab77d2f8946854345e8691a31 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61f740c9bbbe6cbfaa432c946ad3df21f2d0d9a0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a9c4f6ef656771e142da1d18b6e95278e6e739b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/427710e610b8e2a7ce801a6e63be2c22ce015e90 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c108a2e5d1f56429ed372fa2da8201267af70dd6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/328a0058da14f47852e331d59ad115fe0305c411 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cc6b53b20a0980387360221f779d2e082622140 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2004c361c9246162301ddd8902305fdfd832d18 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d03ff6b39aec683352ad787b37e2f8fc2205ab5 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac0960ca1f03e72e19482ad408d20c3f23464210 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/795408dafae9239ce36b83f35f9a29ad30df89d9 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4d9bb89088bbb57c75405e1ba2cd5f0ec58937a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d64b2e1b33343d413eb9af829586e2cff67bbdf8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fec196cb3eb0990ac7852e034b2b6a6ff317252 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/682be6c26dd865758603937b4dfd1ff4901c7b76 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9eec06d0b459735f7b5d0a7714f4852d0271956 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da0504080f2617c87be7d930a4d4b9e9fe88417b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6e0a10d53c46a659271784623a97c53ae194292 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f089089a9408ffd70c6900dbbfecd182d411b586 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1c19e0babf82483c7884ab12bebbee2e06a04b4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58122f9dd255aa0a0e7cff54c36fdfc4d3ece6be | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3924345804ce12929c29b46afea989e4368cda88 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f68e88a50339014a7aca6179b0a72d75da98643b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/11e077035b75aa7fc21312b357f18e70c09343df | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fc3e9a8ce120948c4067fa32b3fa29f310dd064 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5bd4afb9b21648fa661cbd983b86775465a344b | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95755152915a67fb4ce0d35ec38ca50d8cfa22c0 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d411f3a21885eb75cfa93cc9e6ee395e36061d4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37d7c78e90a4b03b017a498f54f261a282530ad3 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0c9c122a70043bc92cd84670e3ead3626cffc8d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9d03380a8a93191ea224da8bed4668954123f6d | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4d236bd4ce7d6d9ec234309ff14c9806041c754 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/948c897b3ccede2e6d17dfc4e68bf90c90544821 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d3ce43e5f17129ac02fc54383f378120086ed9ff | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/784cd7a0bca8c65794c42839ede1a27af29c3fbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d8a9b5fa05f38ffc9f9dcaeded0b21a9d9740cf | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28a8e95ef0cb0674878a29c07f537b6fc503bf0c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/982df47ad335aaaabce9c9d3038ec0ad9264d2af | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4914b2d89075727d3a109de47564fca9e88d5e5e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5151f7352b7addaf351b480b1b884d8deb4388f4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/807c94d6bdef86ebbde0d5b6d5c05bedfe36e980 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96116f815666e6a230d4350076acf599ee8bd16a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae80904b8dc19a3c21860ec357e50da98ff6ec6b | i586 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99b859c2b70c9cfdb2231ca72d3ac2f83d35d28b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4383d64f38b4b12f7d7745ee6be66b1df891afd2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afd328233efdc6af203dcf22193f7b7a77cb9175 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78e76b71114d2982a8fb7dea5f340253552d44b5 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86d1300eeedb9522abc2315dd5324003a37d5629 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09370ef3cc4f0670da7888610d29b826032f7149 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/342f4549204175ea9b4e95b7b76418d5c596c68c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8a9316053652cf6f3c218689ec37401c87aa199 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a499b37fba59bc4a279a3a61fb68df3308a8884 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ffe485a44a7fb7290a26118a7c1fd025e99590f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0195aa14dfa628f224e47e421b01e229dd72ea47 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3899a579a4abfae5dd1a683cc868ca29316b46d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25326e537d08f0ff5b353318a936394ee520c711 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80c05be80d43b322eb095ad5e1aeeaea9b2dd3ce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/595a445ffc363bc15f19b350419978f569875d1f | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31ac4521c9a41c8b38a26b7f78ff8787bc6eec67 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e7710628a9b43c462e909a40602be48455c7c65 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3ad50fd19c423a87124d3fb9011db01e629964 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61063214d0b62c4078f894d5d844ef3357435e8a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c27dd84acd8683ad292f1ebc6bee63095b42964a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df7d6200203c26fc6adaa5ddd18241d0668171ff | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba6e9fb36c8fc30f16c14329fc16b697e40220a2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98266d9450d25b9b81784b5203588af4fbe02fe1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ad761ac13da0f46d264ad3040d06472c01fbf0e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfacdf6530fecbf93a8b20c2f5e965c69d627f36 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad29b3a6359c916cbf98f1681333d83476c5cb2f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9266f68731aa5925323223286d6b48a4f3a5a6f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc75549c23ef515787e3b20e9e60e779586cbdc9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b6cfa7d8a8f34e8c00bb874b5cf3fd3c1bb8c2c | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eefe3cc74fa2d4b9883b97c64bf9f3bf87aa2bbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ec96dba6c172091a3c6bff41c8f4af631d60fbc | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0675ed3dc4fecd9eec68e199a98b8c1f62ef30fd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b1098e665903f6cef132e1b6065b851d002732 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b51825182aa17c4d2df22bcf392f28e3afff9a52 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7343c623bdc2f3d1f67ac9b9563fa7285f55d901 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/866c2446ad4d21d0769add58bd9b527560781236 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/507a9685f2a27e51ca84d33f23f2cb035f53950d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33dfc6ba47525319343aacb1308498324c729ef3 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d4aa08b3d050b4e8a4c2c7163c2b8996cad767e | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc4aa6c612cbeade7973049bd2b03dddcbccf806 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6341c76628983f78f40830f8548aecdb5283b7a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c35cb4849f6f3a8b8377bdf09406274880a8da52 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc3083873a8a657650ec2d8853f881ee9c020837 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37600ccbb8f3f81ca8bbfe1fc62b43ebd79133c7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ef7278e0afb3401f481f1dc2471f9dd0a48bf72 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8404160f030acdd09133060d804b876b6f09df87 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf054572f910224f522de1720dfce8b3f233e480 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/051290519862a60b1313c9e81e4b63c0b2b595c9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f626e8549550d6aca51c2e6f6095c9ec32a7fddb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d84af8e9a86ff4798bd981d66be694c9efe17dcb | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da4087a0ff3b582da02aeaa0af13b44e4b65857e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25776745560936d56cfb6f30d6a798df9875e36f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c82e6a7683389fdd4e1c16b5844e66958454f8d9 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8454a1ba0d9b3dfaff1b5dd8d60410c2473fcfd3 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d586d3e9394d294bc543ffb76ea1fed9c8ae2de8 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a83cde970273659ab53947ed3c420aceb3729f1c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6052c4c5cdfba53ba75dddeba8b5c044616d044f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b05bdda6130ad09113696ff8fe6a80e3c576ff7c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cf418d7a5dfc2a149460ec5ab27f641f5a5f393 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bfc8b0fca3fe2831c4831c35161bfe94e46cf6d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d8ff99ab14076adf8f73ee254d3a1e274208c23 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e6c2438a50b72621244dc23af3458efb33d059f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afbc71617c8bb8a66e5ebe4b43803c52221df672 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f0c0cc3e6570060a73a226bd77f6fff89e220de | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4b8fa8db4222589ec09f80bef1f33b987cddf622 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fdd5d5da16ff5af1143b03b29f311d91582fb98 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16f4641740915120a1cca9820d47786e23aa1577 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a8b7501e8b8bf0d6a3849a8191a48301d042784 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5bc4a8cc62b3502b86e702efaa039de88cf95c6 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1ccfabb41477e3edde4ffdd7371f269242d54fa | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e9172592b472c8b2ac8805cb3a24e198a4ccb87a | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b51807a1a4358d62d647c5d4e3df8a5dcbe812f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2052c420aa048035c4d70872287649e10780d35 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad453f0b5abf4afe2e98e04250584e1ba0b23acd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee43bbc20a45bc589edaaac2cb008443d3a663de | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef0bc5bbfdff32e1e1e074f0d6317c3f45214de1 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9baeb2a99f6e2a4c1eb8aae3afb74469024d5bab | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a465aa7ad69714cab23dede4ee6002339bcb034 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01202907683f0da60c1ae6990e0f2973152a32f2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fddc46a146f9a2c4a4ea9e5385cb1fc1cc2debff | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa3c889952994576fb49e5b1072e3ab029ebf73d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55f24397e1414c3eaabed01fcca4ec53688ac3e6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad21f3a22d969be56a512b0acc12d677268451 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/734e5b6ded24b86ae0fb2672932cc9a1ead0154d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e91b2428dc18fbcaf43b7ba533f6cca51c1bd2d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0221ecdf190c156e5bbc27d501c56a187aec2c8b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1bce902b2acea62defa218ad41105d960146f00 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00f1e2e4f9e732b87a2dc945a47393678fc36c9c | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee784d1cca31ea8d1a0336a8f348bfa863eddac8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c648b103268dea45739ad31c2631f393010b2739 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec82c3c2688048225626faff5f0877ba3b6f7561 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/120ea3ab64ea22c6c2239d40cc51a3876e4f7718 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5539daa3aaaea46e028075a0fef6f86d41218831 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a494c982712a2abb969b9f179be1282fd25b9553 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc20ed5856ca7720fd6d22b3b4965aa758cc13a2 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83f10648ae0e1843da46763a96efefe1fd10b609 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/17b7d1f0223787ba0c5d4b5209c9d8dddce28862 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6638522f4905af128210cfc12fb2ec8576a64438 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/055433a2fe91112bded485c29ac8eae25a823661 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1471b9213821af142b77f4f0d0558cf720b348a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76b3ab9142f6654d9c06ff07c3de7bcabc4bf816 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a0601f61bf25f48549af02eaa523664e788338 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a56b1c17151f3220dbdee0c741ab12057af04991 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6952292ffbf11b43e5f3c05b5ef2501cec0c5efa | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69833e8e8d3d409424bd9b15cc164229137c843a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8def78b3dcebd287cb8004f632263314a0e6bf5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a29d95fafda61208fdcc2758ffd68a274a17e739 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/281280d59e2f935e41afa84a045f171d9b7efcd4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/215f311de24ca3e0ed257954db5ff6e9bedf62f2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0059a31244e44b4f9aa4b5a4cf32dc53b5a69a50 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30992dd8857353424178020ec84f5da218062138 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40d6255e049dc0d4725aec659d4aa46145c8a8d7 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e77ee1de2eb5c0faf30026aa9371f62d36da2eda | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ebf020223706117ee93284eaa6543bf9218174ba | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7b5f4ccf64c6353f8f530f558c5e561d7de4e3f | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/471c58bca3eb132c46db94f7411b0010e59dba41 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6af6624543ae2ae4c934d4bb1a0b57334ca2f56b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac9e51c5faeb81d16c9f3565c0ee6ca3f511e69b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/52564cfb16645bb6833ba9ac358caa6c07920ba4 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f19ba5a85c52002aaa1ac602b10f5a34e32a1084 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e32cd221204fd92d1901c564ed026229b21e824 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d7aea365da1b7a5026c1faa34ca5682e5e78ae4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b484327d8ed9a1fa37373fb8b2325843b9057ae | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c10a14ee0fa3bc5b9e03b7286b254a561a380afd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/072381653b80df24897cdc36efc730b1ddf8fbbe | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99d10cfe2021f4b74f621e16ae2b2a967a35423a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6d41fa979bddfbe434e07876be4bd77a12e1c56 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ddfc4f181c3213deddb4c62534c89591e63091a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c5d25490182a49abbf99d0b61a3327e364f2169 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/839a746e6b7ef5a5a68e4389222daf00e41984f0 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd1700e5e607d23c1d678eb835dbdde69bd1fdc9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47148e63380a6d6e8a457f836ea466efec87d1ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5c6c55b5404707f527c0792b736fcc7c73b16e2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd847ee7f5e903f0ee8ae92b348a8678533533c0 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07e769fe945ea4bd1200509de46b209fc0125e28 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67746eeac5399ff970cd2c3723b209e3e9bff7fe | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c033b9a22d392dc5bd4de828d17b04d6419d5829 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e9e4122c569f33a3285e1dccab168c510d216dd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8ab1aba060cf5002020e137aac84d1c7f1e22aa | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c8a57fe0c896b09ef632037d5be6f0f59430042 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93799257349ac1f3dbf66a0f87326820475d8b17 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6423d4f42f4efa3dd2a5943836d57d74c3e113d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30aea8ca3d52368df8a1a2a0b5e46a1f62f31eca | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28ff8a7f1b4d688ec22de988e3195ca31166fa79 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/469f8007c35a87e800afe78a9bd79b56a758c02a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c08c76e1c12ff217de90492af75980c3c9ed16e8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bbec84cd2a5003ef14c8b135ce0109978f49ba0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1400f26ff1cb937d804c568ea86c266695e10c05 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efcdea39f3fd8e9258d940fb1a275ebf9ecbf5c0 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61346220493308eb838feda760d4d6204a07e732 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69651c266cee83b04a897a0fec4ab98bc2f98b45 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b4ac9d6ffe79e593a15d3be91c1e22ec505e9d5a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d291c25c67b738c93cc66f063f962b682c7adac3 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2a8e86e26659e9e242bcc0d1776c0bdc0e2f73e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1369ac07d8c423a316b09e735af3cdbe094324f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d222e6a284b7a4f5a63251f0f453e8bce0c56617 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa54d3f43aefc3a50db5fefaf94274eb37e3047 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6b122494cd7e5e5f549ed8cc6625201feeaad71 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c5b78c23ba9014c4be9c132114705db9fb8216b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55c5906fe603fb705b223db9ef5c02d1d79d6f94 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6757f1969458b2da9ab05e96fdd5bed9780771c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/468633cdbf0c5acc56af333c1c18d32330f19a04 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed3b6b9007b1321cfd78e668e6b3c6508acb421d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dcaf90529bdb6cab453badb99b23e12648b14023 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4769cc0cf1fc8f42669417d6e816d8ba22809941 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5827df1ba85d170c3d220bb93f424d051c25a19b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0ba98f2a431ac45b31b69acdb0e2db0b237c14c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/b286ac0f87e9f17f9881739972c20ed931971f7a | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/04d34db3ec9f055ba3e1fa10994b1d36aeea0767 | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/5d4487cd551573c65f3efa79dfd1363659ae3103 | ORPH mips64 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/0634c0df56dbfe8f0dc9c95ce736bdc4bca156c0 | mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/575f30ff4b9ffd578a1caea71b1d37912b17a4b3 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/133c03179d9a15fdcf50e42c34363996604db838 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/c1ec76746dc3083ec0ad9e152b3fbd76d4a8e0c9 | ORPH sh4eb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/c4af2457dbbca3de200f4561b75de80a4319367c | mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/058dd8cdb6f7cf35185b50634d6c01cda6c2d376 | ORPH mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b873074330c5fb6d9a3edb6ac9f4cb11f58cd66a | ORPH sparc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c6a77d8250c8563eef3287752177552394c75b24 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d6d7346cf533257b60c1da99027a2a3f86b23a58 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e4c29a8e8a5e0b60acddeec6fc6c36162edcc35a | riscv64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/381dd7d3993b2ffe2a6a7de9e357357bfd3a69ff | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/76edfd8c73e22fdeaf038875cd051d472ac9f3c0 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc598d466a7deb5253af06ec57b641e0c28e2e94 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ca202cee08181ef3641fc71784a888654a57d364 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bf2855780649cc4554605fc179564b13f3351b63 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/240cfde7d58797d237c2f0660f4722556118dce0 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4b47f6b2785c3a1b7459253e7995464c99594a26 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f9e06e753ddc11eff69e9a4ee9a213533b2f961a | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bafac12da293cb6a795239c01712e609c46384aa | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/24834ea8dded38d520c5154d4d2a6ee3f01acd6c | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/78c83599e05197e8db0d9c6ac3817f9074a34165 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d6fe2b7050ae557351d3ca16bddbdeae9fe038cf | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b4d837d1bd98fc317130eec6059d4b515ae7d067 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f712af13bb3c21c54c38275df2e955fbe460beb8 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/175272180ced3b38d886ed1406132d7cbe5a5fcf | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/171c10eeb6c50aa2f180433f3715bc8b9d40100d | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b9f23e9b54f111a578bf98d2f053594e2b14f3b | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/55b313e225df00433d0603b153b78a9e4ca9880f | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/d7054ff4a23573a91c84c070499badc292b4eb41 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c170e21954b65df0967787c41109c443c1f12ef8 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/2e430152f1b4d808a70574ad7064d725273c4f89 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5a0fe4715bb42c2ccc75afc22b378e6ed67455a | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/545e080d33c7f57fdbc36f05491927fc1826b426 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/321e3722ae5042e46f6ea0b8b8e9f5c3db9439df | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb62bca2903346bae2a69f51fc4ec3565377b4ec | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19517b07a21db4ec645d4f062a6a5e7d1a7075b9 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cac0325c6e30857d8c79b0e6cba125c1c5e6149 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6366f60bdb4ba9ec18cb02b3e95a304e88475c07 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4479c05ef126fa0d6c716a9df616143ab1ffca91 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/626418d95c0721b8571b11402fdb2d2379240b73 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6caa203d714fb0f39e317e36ac70c3987f469f08 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f3d7f60a7ed87cd0f9c19e11f2bdd40edd172af3 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/ee0d6098f02f84045ea5a1c67267db028a9ab413 | i686 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/c9c0528162002eeaa2c243337dc500681bff8234 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ebe7249d0c751444e78e71c6a8e1d0683e1ed4c0 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/5efebb541aceb22269aa1c3d59d7805fe4e451d0 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e880cb53abf65d13d8571156d3d5be1762df05a5 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/746e86387b2b71c552e302d6c6aae4fab9161bc5 | powerpc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/3e0b395770e40104d9c46e3fa2bc019d22df5d71 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/3dc1ae1db09629b0ca3dc09ba6c5b32d0ae8abce | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/2aabd652fb3244dd7d1129f80ed699a52c578bd4 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/340765438eecb11579da1e2edf3bc445a0406b73 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30a17c4e27353929ef0773b91f8e257b914b837b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ba59dda6738b2a8a845f47decd4fac9a4d998ccb | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bfc29eeb3424aeb2c3d38316fd84b1475fdaa3fe | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e51d26c4f08a715ee7e918f33d069aced20e7e65 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9fff992240e6e1217941e61ab5768fc5bca7e225 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ac2ac0e5519e24a4ba7a9b0fb47f938654e71f8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d1409562358304e86c0b5ee1b5c1c762d5236f30 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/974e18c2064cc7f77892da27d6f5ba9bb20ea4a0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec17a81ca4ae90617dd5d20c1f216a97778109d6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/96c60f688ec9178da4bb5e4e9be542f5fa19e30f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c544902297a51633a10f3e7b7a4406642e775dc | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d306a367ac81c1328d869d596d4074ad7fe37984 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/474c07c63cd90fb8721b6d6584a9381e699b96b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95d3e1d31c2dd9f5be41c9615faeb96908877eeb | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ac43255f429a51e93b1e1a187d86132f1764a429 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd6c8f13b8ab0cbcaff9cec9e0b0523959035bc7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae090dec7f267ecab407866f5c838ae5bccf9d32 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5c5324a205daf927a7410d993ccf64c09e1be1a3 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/12bd2bdd82384a42569dad9cfa735fa42b84468e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e55b48d6967544004b0876ae928b443fdcf6602c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3e28fc0da11db6699ac25f5e55385cdb2b88abec | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7cc1c2ad6dd98eb329f7687da0299cd0d86c2188 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d4d344e06b146a9dc9ec2f6d227e3300283266ba | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b9f51b2232997d5be2ae8a0198da8d5663894131 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ebf466007116590b5e31d145ad2821f0b6f3731b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/09e57ceac020a2ce530fb97707255dd928c42727 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ed75ce3de394452496b015df9a6ccba7300935e | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a93d6743779f3120ac88e6c05a321705831e6c7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7c496c9b559609b2caa584149503fe9237505d9e | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/97b63508d2f18b93c267f0865ad8fd42d7233879 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/eb694f9012e211d845d50d337c528bcd31c5b004 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9c2c25c1bcc3c341d0eaffdb85585596995e09f7 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/c3b00d10955e0c2e292c952ea16aab982ebb2b8a | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/290b45ad453e49e3fee90c25aa8e277de7e04e05 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/20cc724e35483d50828218b0369b74733fd0c8c7 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/df136319d51c6b855b34601f3bb9273ffbb86417 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/2a60470204cf0a2a9bf379f948adfd3856c68698 | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5477bd8970ad78ff7ed6ff58a30f64a3d643e3fb | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b2733ca1c7408218f81a3c30bbd027c09a890eb1 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f0489e602bd87acf463628cc7f7081ef1d055f98 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/49a37a12a9deec9ed7141997090ef840723e3a33 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7cbb3624f3e170a6c119e2ad73fd72fd2f9f28ef | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fa4cf5c8746090480ea409897dce154149572fac | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/eca49aae26193cd9e5a6d5fb479a73618ee7dcc0 | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1c81febc933aba6cbffbea526f9e9876014e7d18 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/257116be97b8dac3cb79fdaad5cd1784925cac47 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/da5a0dbb7eb5b901d6d9ca7cc426befd460b1426 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/282adde74d24b1ab02e85b12a4ace52f5ac7c62f | powerpc64le | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3627729af5e4faa87a0aaae9dbfaf77e2b6a122e | m68k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/bb96eb9296e229416b87ce2db77fc7af613f1275 | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/643f0684418fd69517f1ec097b8cdaaba9173103 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c35ac51f99bbbe65d02f6076a4ea3bfe56bff2de | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/93a99c11ac76d7df3c6d8742f94ca34193ff2c40 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53d01391359b946b8f8cfb2f0652ce02c8b84b0f | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4db6faf8da1857d0da05d0d1acfe3acca53d615f | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/529af12d514dcbf338d606ef3112d6e3646061ca | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c15ddd875c3ad5ce7941089a03a5c6fb8d9a0478 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2c0c3ed98a4bf6f5c4353d127a57e8adcf3d7028 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/360111206fb0d7215fdc2c89198a2722b4643801 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7ddadb06419b6dd8b04655c610e0b77c47ee795e | i586 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c4ef9a2bd6c0414fa1ce2c75eae93dfc09e4be85 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/917904a7729dac096ec37b58423dbe9c1b3d0828 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d80e576ea2c5acf8039d9446f3457a916328bcd4 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5af2f99a4a40e888c0b1b42499cb248078fbea6a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ec82176b6362ed13995f3144d28fa8fb59d0d5a6 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a0008c9603a9dd894ae84b3ce4c78fe77587653f | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/61c610a15ef600bcf31f6326fab7497e7f89c3b6 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c6055b073f1704a9539d7a9742e0a8f9b151fdaf | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/25bbc289c827b12049e8ecee6dcf3e9ec1eb90f1 | riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2e5cda9918b823a1d1e3dfdae34744f515ddd4b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/342d5e82181a482209e81f4b601d1f68e7aea778 | aarch64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/48cc6b53ab0c0c8ab1097e1260c1d8a3b1d7faab | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c698561ea9cac15526b8a7e76afd0d1b650ed597 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/85bfef1c9d665588df346367d1151565c7d49369 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/0537362ea0a47c68040f5852d2a1a4a3c58b463c | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/456cfda8cc28364315f67e7d8ddee81fc5ea3341 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/965cbc45a8fb719d00b4fbc9153d01dab0db7e1f | mips64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/5a3e4fc002371204664d5ea758a23233093e1ca6 | sparc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e33eab30bf375240edb43063d97942ca290d31bd | aarch64_be | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/91a47bb1b1dfeeca79a99192904ce5532c56a366 | mips | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/55e614d35d46a24867fe42508bc07e0c02b13c59 | or1k | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e9f81842c91ca5b12fe38140dee00bec8c0985ea | microblazeel | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/d2c1875c8434d277456da98c634acfd69340ce4f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/aa18f906ca667027089524e1087c95c13e9521fc | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4ef6e1e1f662f278939ea7a98db04d1a60bc6bc8 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ff96cca0027804fb4e439ed9674386440a074292 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a21d00e78fef9e78fd092dfda2b60d52444e44b8 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d80543725e62d8e3c14baa7ded39de5189cbb8f9 | mips64el | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/d2b3b6cd80b4e25967025e365936dde99a5647fc | ORPH arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/176b7e180a1b12a8259154a1c55fd54666aaa810 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a2fe13249697590e3de73092e5922b2ba19f30e2 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/6addbe4f34e20e6b95eef6ac0f07e53b79281444 | sh4eb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/fe4f148de42aa7146b1acca5f36e89b0f8e3e200 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/c48d79ccb10c2970b0100ec900d60c28313cf121 | mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/aa0edee22f6837e89678fc055a5684ca56aae36e | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e4f42836aeea477d3449b8685d65058f6df25558 | mipsel | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3e17119046bd277df6944b336af424622847c854 | xtensa | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/f9be31c2ae9668a86670c38135d0f84dfc0c3bb9 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/9dab0094098bf2ec36753fa13db9020318421673 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/833a27281ae98d9279f4bdbd8bcf7affdc53016d | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ac3ad38f9208a9897f3f23e455fdd5cc2e109696 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/621c8f22953db1a00f009b629a43e837ed4463ea | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d2a19e9eda42e99bd8b978f5a521ed3593735d0b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4649b2c7c5494e0d998cc757f72b2e192d4a66a8 | or1k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/56d8e97be92512892783f5bca7a80ee8af0859eb | mips | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/8e3dac5b15fdbab3d2cfe3bc6c399333e540c306 | ORPH arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/1e4b7a429ff690ec5d222ba121c31f96c99c8a3d | mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/d42b8bbc0f6bafdf35e1e2e7b6f1258dcec620fa | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/715c28beb4faabfb174ba002c5dd72ee066f5464 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/364f6884b9a534b5d9d1e4d41672468f46e499b8 | ORPH arc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/53e0c05fab60155bc6934f8449e8aa2f30727458 | ORPH sparc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/a15a6240172549d2965d68f4abb9cff56d81a8a2 | microblazeel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/9c638ac4ff5e3db198a410f368729ac361007ce4 | x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/b06e108781d82d71b139e56611f89446867673de | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9797c46d9d3c1588530523c9c8142a0d508ebf83 | aarch64_be | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/5a0adf76c869091090fdfe6ff185809471664f5d | arm | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/fe9c758ad40994841145c33ef787eb1d0a7e6640 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/e925aaab09e86f42e9ad8bf02a2fc29e89e5ec15 | ORPH x86_64 | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/9c61fc0f946dbb580d55ec9737c7ff48a9d765b4 | or1k | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/28bceb69cf1825662885325736ead1242f37870a | sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fb8474776624af4d30200756f1ddb9666610d1c2 | ORPH sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/669c93ef033bd1b4d82014bca159a92dd7a9b3e4 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/2ba40235d3eb992483b139921c747bf7a9c66afb | m68k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/ee2bdde7540afec6ec5c9d7440cf6801e2d93772 | arc | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/dd15981834c16d3eb3964a9d602c5f3d0fe1b5de | arm | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/31fe26870d0f54ef3a51ecdfde822625317f36b6 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/5169f8b89d20bef8d5b6c55364b25d065d53bb11 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/1113e978d47958d2bb70a404d64b0bedf4b36060 | sh4aeb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/268d13d6afd4f802105d37561e3849834c3d737c | sparc | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/d32e533755e727f33cf88094238f7c21fa25a6f6 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/cd065800b2a48e70b534fe280ea5c8ff37051c19 | ORPH mips64 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/a18061de5e37a2847b54564166ad223493766405 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/cd9a1c2d6b9fdb0e3407713d474d2d70150af53a | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/c6407cdd0e3c9db04154433da992a7f28a1967aa | ORPH riscv64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f49920cb3cbd3c59d46c735829dda9f70da9a4cb | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/244e50b7bbe46f794aa1c9c2636bc1652df5d6c7 | ORPH aarch64 | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/a84d5915d68da7b121337f2a48de93e91ccefe30 | ORPH aarch64_be | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/49d009f6c9a0302245112aed7e4a0a450a2213c9 | ORPH microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/39b9b251af52d3cfa1a3a0b4e21dbacc901f4f2e | arceb | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/df7edeacf34240a7720227e51768c5b21ee17200 | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/8df68addb47312f52b77f12aa78c64b09bfe3e3a | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/bb54b049e6e32308af1af0d3703216063b7c3ae8 | arceb | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/d9470b23f3a0114219d53e6fd054bce8bf7f371c | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/1acd9f2a69c28ec0e057820fa8012d520f9ad72b | ORPH microblazeel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/aa660503c5c96cbc2cb9bffbda02ea2a18fcc032 | ORPH aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/eef39a39593d61462f7d5694c55eb6b33fc0d115 | ORPH arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3e52f67ae2c91d80c54323a394114df8c8dc1748 | ORPH mipsel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/8717b403fbd33c6b94791412da37731aa7e6a58c | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0db271dbc220bea72e9b71746b00bc53ad2e2801 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/66a6d57ec41ee374a8bd8107bc323ba21f18bd43 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c8291834c2b65be331f84ada14320411cfb6bffd | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/192605cd5f711903d1ccaf7fef0be81abdf96041 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8a4f1ca1008f28c6abbbb3eb1fb4586eeb1eb9ff | ORPH sh4 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fc6879b975c8d61dc4e7604465bd01edf19e0469 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b155cc847b1f1de8b131421fd4313fee61591e93 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3e32408af2ae113fb138a6b1a1460c823ab6fb73 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/be1cc2bd1902e83b335b5dc839e77f634616f6e0 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c503d6a583adb52df08e9cf7bc6e76e6bb57c3a7 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9791781958b6fda79dc8125a7be709cf3dc326dc | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3160daa03a5d6d22f73aacc5e5a3bcb8c106db96 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/016f8abde2f45c8906f48c73280ead854a18870b | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/51820d61b5d09d6ea53026b921dbb0735f211033 | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c322e9d20a3b903155484c14e3ca88c030b2d865 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/98fdd7a9214f5f3d8e4a8aa5a1329a210c90d620 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d8ee1f40f16afc6469d62c7d763ab1bb6ceb3411 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fa2f1e928109d724fce6733b7ebef9ff81f51eec | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fb9ce0ea8a1f6af993ad53419b5e651da829f95b | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3eec63ffec93b8975cb666076c3eb83bea608710 | ORPH mips64el | snmppp-3.4.10 | NOK | http://autobuild.buildroot.net/results/36b08dba6a07a2d19bf5342488693926e6f98298 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e63421b88e9f87790e33b463ba7e1eb6b2ba4580 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/77680bfbe4ef98747ca7cb7c5ae905c047ab2b25 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/34f8d3051fce3c7f1f28a8581d27dcf497f56343 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/18ec1545dbf0a1f51dd461c6f87c9ca9c0e5a082 | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cb69c1798eb918b9aa416f8d91e592e75a3683f8 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8458751076b39a082553f327ab8cac46dd114fc5 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/abb58e710e1d0c5e4d5685fa9d40469472511b84 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/198212e1a7eac34b0b13d8e3e5b71f216fa0a4c3 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/6e84dde8f2a722d8ff7ef9b05db16553fcf7b90e | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/d39155496a6987f4ecebbc0d8311620e3572cd03 | ORPH or1k | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b01f7783d1dd8183c366a3a82c29aeb2cf495bf7 | sh4 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/02910480e5d77e41fc52ff5187330d3b433643b2 | mipsel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/76d84a872763bec1b22f53edf313c1d4ca6d4aa1 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/f539a054cd3185b0dd317385b953e99773304f88 | m68k | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/ee9e41badcf38ce27a6faa03e887c195deb93105 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/6896eefe0969f9d6c86a67aa4c71226169ced990 | microblaze | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/74086b201fb37ea0fe02e55a591186958788090e | sparc | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/e8b7df25a4e2fead771589a2debb103f2acbda41 | xtensa | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/aa1ac30dd2e251dc2b8026673bad2eb7e029de06 | mips64el | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/263021ac00e642282f9e52938c30d301d42de875 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/e3b6677f597f3c26444877809423aa3ff4f3d63f | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/41c19f599afd7bb0136c17af245afcaa59e333d1 | ORPH mips | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/307faeb443c32458958d80ff61d8d81f86a5707d | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/a70941a903123bb25fed5ca03cf0d6ecdc21d0ba | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 2 libcamera-1966b9a58436fab51... | 1 wavemon-0.9.4 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3c2e02d880ab7281f4c6d8aa085a216f802847ff | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/75b8d182b6d3b76bc42a062af546201304d4021e | riscv64 | libcamera-1966b9a58436fab51... | NOK | http://autobuild.buildroot.net/results/8bfe32a0eb2f259b3db95b5296403c76c2982013 | mips | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/44ca9ef3fa90b80ff092075038d3ba61f2f10a91 | ORPH mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/57991d6cd1356e3b96aacbb88c3e3a3200c7964f | Classification of failures by reason for 2022.08.x -------------------------------------------------- acpid-2.0.33 | 1 dieharder-3.31.1 | 1 gmp-6.2.1 | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 libcurl-7.84.0 | 1 make: *** wait: No child pr... | 1 unknown | 1 vdr-2.6.1 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/2b6115c6d6992d250042b0f1f8d2defa02436c0c | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5602ccafa1c1e4077cc6298b425d83449cd03920 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/aae7d44f7f591ab419eded5856982d5b7ec80a03 | ORPH mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/88a95af1f6ff81c574d1809ad3f90502320bab33 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/82fadcdf2724e330dfe12a8528411b66155d1f3b | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/331e1b69412b2e553a43f19c0852a458065f03d1 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/99e9dc159ea2d093341f48c027b1d1ebd95ce088 | mips64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/1b44fa52b1dd77d9930c09ddbbe87fcc89b1d0fb | arm | unknown | NOK | http://autobuild.buildroot.net/results/eb3a48d1d13df10e5cf6bba75416b3939dbbbdba | arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/9bace99025e77d88d47b9f43d0d54f64226ed4cf | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/9fec4c6a918a590ac02781d60873f1dc73fbc04f | Gitlab CI results for 2022-10-14 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035122 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035129 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035151 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035153 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035155 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035158 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035161 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035163 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035164 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035165 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035166 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035167 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035171 | freescale_imx8mnevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035204 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035212 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035213 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035214 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035215 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035217 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035219 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035220 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035222 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035223 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035242 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035274 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035279 | ls1028ardb | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035296 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035298 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035301 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035304 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035307 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035310 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035312 | nezha | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035324 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035328 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035330 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035331 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035332 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035358 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035363 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035366 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035372 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035374 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035377 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035379 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035389 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035391 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035392 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035393 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035400 | qemu_riscv64_nommu_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035431 | qemu_riscv64_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035432 | qemu_s390x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035433 | qemu_sh4_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035434 | qemu_sh4eb_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035435 | qemu_sparc64_sun4u | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035437 | qemu_sparc_ss10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035439 | qemu_x86 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035442 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035441 | qemu_xtensa_lx60 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035444 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035445 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035458 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035446 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035448 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035451 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035453 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035452 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035454 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035456 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035455 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035460 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035459 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035462 | riotboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035463 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035465 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035467 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035468 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035469 | rock_pi_n8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035470 | rockpro64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035471 | roseapplepi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035473 | s6lx9_microboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035474 | sheevaplug | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035475 | sipeed_maix_bit | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035477 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035478 | sipeed_maix_dock | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035481 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035482 | sipeed_maix_go | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035483 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035485 | sipeed_maixduino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035486 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035487 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035488 | snps_archs38_axs103 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035489 | snps_archs38_haps | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035490 | snps_archs38_hsdk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035491 | socrates_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035492 | solidrun_clearfog | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035493 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035494 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035496 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035497 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035498 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035499 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035500 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035503 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035504 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035505 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035507 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035508 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035509 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035510 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035512 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035513 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035515 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035516 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035518 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035522 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035523 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035525 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035529 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035531 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035534 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035535 | -- http://autobuild.buildroot.net From huth at tuxfamily.org Sat Oct 15 06:04:11 2022 From: huth at tuxfamily.org (Thomas Huth) Date: Sat, 15 Oct 2022 08:04:11 +0200 Subject: [Buildroot] [PATCH] package/frotz: Add a missing dependency to the Makefile to fix build problems Message-ID: <20221015060411.326933-1-huth@tuxfamily.org> There are currently some build jobs failing where blorblib is built before hash.h has been created. This patch should hopefully fix these issues. Signed-off-by: Thomas Huth --- See e.g. here for a failed build: http://autobuild.buildroot.net/results/9cd213ce2d36f797041c7b21044c2b2c223dd546/build-end.log ...0001-Makefile-blorb-lib-needs-hash.h.patch | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch diff --git a/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch b/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch new file mode 100644 index 0000000000..3bde10b6ba --- /dev/null +++ b/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch @@ -0,0 +1,40 @@ +From cdf0ad4aff2d8937034e02e41a5aadcca320ea18 Mon Sep 17 00:00:00 2001 +From: Thomas Huth +Date: Fri, 14 Oct 2022 20:29:41 +0200 +Subject: [PATCH] Makefile: blorb-lib needs hash.h + +If running "make blorb-lib" on a vanilla source directory, the +compilation fails with: + + make -C src/blorb + make[1]: Entering directory '/home/thomas/src/frotz/src/blorb' + cc -Wall -std=c99 -O3 -g -D_POSIX_C_SOURCE=200809L -I../common -fPIC + -fpic -o blorblib.o -c blorblib.c + In file included from blorblib.c:11: + ../common/frotz.h:74:10: fatal error: hash.h: No such file or directory + 74 | #include "hash.h" + | ^~~~~~~~ + compilation terminated. + +Looks like we also have to make sure that hash.h is in place before +compiling the blorb target, thus add the dependency to the Makefile. +--- + Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 1d27b09..3d2bc45 100644 +--- a/Makefile ++++ b/Makefile +@@ -461,7 +461,7 @@ $(SDL_LIB): $(COMMON_DEFINES) $(HASH) $(SDL_DIR) + $(DUMB_LIB): $(COMMON_DEFINES) $(HASH) + $(MAKE) -C $(DUMB_DIR) + +-$(BLORB_LIB): $(COMMON_DEFINES) ++$(BLORB_LIB): $(COMMON_DEFINES) $(HASH) + $(MAKE) -C $(BLORB_DIR) + + $(SUB_CLEAN): +-- +2.37.3 + -- 2.37.3 From jesseevg at gmail.com Sat Oct 15 08:11:22 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Sat, 15 Oct 2022 10:11:22 +0200 Subject: [Buildroot] Changing configuration options of package in another one In-Reply-To: References: Message-ID: On Fri, Oct 14, 2022, 14:48 Quentin Schulz < quentin.schulz at theobroma-systems.com> wrote: > Hi Jesse, > > On 10/13/22 15:06, Jesse Van Gavere wrote: > > Hello, > > > > I'm in a bit of a peculiar situation for which I'm not sure what the > > correct solution is. > > I'm trying to implement the qt6 remote objects package, this has a > > dependency on host-qt6remoteobjects because it needs a host tool from > > it to build the target package, however, to build the host package it > > needs qt6base network enabled in the host qt6 build, this is by > > default turned off as it's not a necessity for the host tools needed > > to build the target package. > > > > So to make it work I've added an enable for the network module to > > HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, > > what should I do here? Manipulate the qt6 host build it in the remote > > objects package? Or maybe turn on the network module for the qt6 host > > build whenever the target qt6 network module gets enabled? > > > > Not sure I have entirely understood the issue but here's a try anyways :) > > I would add a build option to the host qt6 for network support in > Kconfig, then have your remote objects package depends on this option > being selected. If it's not selected, your package won't be selected > either, which is what is desired I think? > > Cheers, > Quentin Hello Quentin, Thank you, that might work yes, I think I could make it a "hidden" kconfig option in the qt6 package which is then selected by the remote objects package, I'll implement it that way and see how the reception to it is. Thanks! Regards, Jesse -------------- next part -------------- An HTML attachment was scrubbed... URL: From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:54 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:54 +0800 Subject: [Buildroot] [0/3] package/libkcapi: bump version to 1.4.0 and add Kconfigs Message-ID: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> This series is to: - bump version to latest version 1.4.0 - add Kconfig option for building kcapi-dgst - add Kconfig options for enabling lib-asym and lib-kpp Tan En De (3): package/libkcapi: bump version to 1.4.0 package/libkcapi: support building kcapi-dgst application package/libkcapi: support enabling lib-asym and lib-kpp ...f-__NR_io_getevents-when-not-defined.patch | 42 ------------------- package/libkcapi/Config.in | 9 ++++ package/libkcapi/libkcapi.hash | 4 +- package/libkcapi/libkcapi.mk | 20 ++++++++- 4 files changed, 30 insertions(+), 45 deletions(-) delete mode 100644 package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:56 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:56 +0800 Subject: [Buildroot] [2/3] package/libkcapi: support building kcapi-dgst application In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-3-ende.tan@linux.starfivetech.com> Just add a new Kconfig option in order to support building kcapi-dgst application. Signed-off-by: Tan En De --- package/libkcapi/Config.in | 3 +++ package/libkcapi/libkcapi.mk | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8243f6b738..176767e338 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -28,4 +28,7 @@ config BR2_PACKAGE_LIBKCAPI_TEST bool "build test program" depends on BR2_USE_MMU # fork() +config BR2_PACKAGE_LIBKCAPI_DGSTAPP + bool "build dgst application" + endif diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 30d500696b..214999ddd2 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -47,4 +47,10 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-test endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) +LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp +else +LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp +endif + $(eval $(autotools-package)) -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:57 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:57 +0800 Subject: [Buildroot] [3/3] package/libkcapi: support enabling lib-asym and lib-kpp In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-4-ende.tan@linux.starfivetech.com> Add Kconfig options to allow enabling asymmetric cipher support (--enable-lib-asym) and key protocol primitives support (--enable-lib-kpp) in library. Signed-off-by: Tan En De --- package/libkcapi/Config.in | 6 ++++++ package/libkcapi/libkcapi.mk | 12 ++++++++++++ 2 files changed, 18 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 176767e338..97eda31a4e 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -31,4 +31,10 @@ config BR2_PACKAGE_LIBKCAPI_TEST config BR2_PACKAGE_LIBKCAPI_DGSTAPP bool "build dgst application" +config BR2_PACKAGE_LIBKCAPI_ASYM + bool "enable asymmetric ciphers library functions (kernel patching required)" + +config BR2_PACKAGE_LIBKCAPI_KPP + bool "enable KPP library functions (kernel patching required)" + endif diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 214999ddd2..c3b655bb35 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -53,4 +53,16 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_ASYM),y) +LIBKCAPI_CONF_OPTS += --enable-lib-asym +else +LIBKCAPI_CONF_OPTS += --disable-lib-asym +endif + +ifeq ($(BR2_PACKAGE_LIBKCAPI_KPP),y) +LIBKCAPI_CONF_OPTS += --enable-lib-kpp +else +LIBKCAPI_CONF_OPTS += --disable-lib-kpp +endif + $(eval $(autotools-package)) -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:55 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:55 +0800 Subject: [Buildroot] [1/3] package/libkcapi: bump version to 1.4.0 In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-2-ende.tan@linux.starfivetech.com> Removed patch applied upstream: https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923 Signed-off-by: Tan En De --- ...f-__NR_io_getevents-when-not-defined.patch | 42 ------------------- package/libkcapi/libkcapi.hash | 4 +- package/libkcapi/libkcapi.mk | 2 +- 3 files changed, 3 insertions(+), 45 deletions(-) delete mode 100644 package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch diff --git a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch b/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch deleted file mode 100644 index 20aa75b741..0000000000 --- a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 455c4938f5822c017c7ff79dd2dca638b6410923 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Sun, 15 Nov 2020 18:05:48 -0800 -Subject: [PATCH] Disable use of __NR_io_getevents when not defined - -Architectures like riscv32 do not define this syscall, therefore return -ENOSYS on such architectures - -Upstream-Status: Pending -Signed-off-by: Khem Raj -Signed-off-by: Stephan Mueller -[Retrieved from: -https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923] -Signed-off-by: Fabrice Fontaine ---- - lib/internal.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/lib/internal.h b/lib/internal.h -index 1237827..f765461 100644 ---- a/lib/internal.h -+++ b/lib/internal.h -@@ -325,10 +325,17 @@ static inline int io_submit(aio_context_t ctx, long n, struct iocb **iocb) - return syscall(__NR_io_submit, ctx, n, iocb); - } - --static inline int io_getevents(aio_context_t ctx, long min, long max, -- struct io_event *events, struct timespec *timeout) -+static inline int io_getevents(__attribute__((unused)) aio_context_t ctx, -+ __attribute__((unused)) long min, -+ __attribute__((unused)) long max, -+ __attribute__((unused)) struct io_event *events, -+ __attribute__((unused)) struct timespec *timeout) - { -+#ifdef __NR_io_getevents - return syscall(__NR_io_getevents, ctx, min, max, events, timeout); -+#else -+ return -ENOSYS; -+#endif - } - - /************************************************************ diff --git a/package/libkcapi/libkcapi.hash b/package/libkcapi/libkcapi.hash index 49b0880211..d858086408 100644 --- a/package/libkcapi/libkcapi.hash +++ b/package/libkcapi/libkcapi.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 8a08dcbb4d05ede4357cdc9d61c7f2a7f2cd96b7ce2eb41b28e45b2e378267ad libkcapi-1.1.5.tar.xz -sha256 c6b8402a68999b0f84560ab43cdf60f9ff33c4a9a8ced6a40db9d3b787ba5b4a COPYING +sha256 644b47593b3f27f08add7a8808ccdbe569a2f331d70fb8b52551e57379b917fa libkcapi-1.4.0.tar.xz +sha256 9765fad61726afb2b253db2c68153672e4178d6809667ae98141f3e90fe8645b COPYING sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING.gplv2 sha256 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239 COPYING.bsd diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 09c5c028bc..30d500696b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBKCAPI_VERSION = 1.1.5 +LIBKCAPI_VERSION = 1.4.0 LIBKCAPI_SOURCE = libkcapi-$(LIBKCAPI_VERSION).tar.xz LIBKCAPI_SITE = http://www.chronox.de/libkcapi LIBKCAPI_AUTORECONF = YES -- 2.34.1 From peter at korsgaard.com Sat Oct 15 12:44:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:44:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/uhd: drop have_mfpu_neon In-Reply-To: <20220925123948.264951-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 25 Sep 2022 14:39:48 +0200") References: <20220925123948.264951-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjpjlxl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop have_mfpu_neon which has been added by commit > b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: > CMake Warning: > Manually-specified variables were not used by the project: > BUILD_DOC > BUILD_DOCS > BUILD_EXAMPLE > BUILD_EXAMPLES > BUILD_TEST > BUILD_TESTING > BUILD_TESTS > CMAKE_INSTALL_RUNSTATEDIR > have_mfpu_neon > Signed-off-by: Fabrice Fontaine Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:46:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:46:42 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: remove Joerg Krause In-Reply-To: <20220928070417.3C6D386402@busybox.osuosl.org> (Thomas Petazzoni's message of "Wed, 28 Sep 2022 09:03:57 +0200") References: <20220928070417.3C6D386402@busybox.osuosl.org> Message-ID: <87o7udjlu5.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=c6b987f39ddd2abbce526021ccb39bd42e50fa23 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > His e-mail server is no longer responsive. Every single day, we get: > : connect to embedded.rocks[99.83.154.118]:25: > Connection timed out > when sending the daily autobuilder report. > Signed-off-by: Thomas Petazzoni > --- Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:49:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:49:05 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: remove Nicolas Tran In-Reply-To: <20220928070417.46BB486409@busybox.osuosl.org> (Thomas Petazzoni via buildroot's message of "Wed, 28 Sep 2022 09:04:00 +0200") References: <20220928070417.46BB486409@busybox.osuosl.org> Message-ID: <87k051jlq6.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > commit: https://git.buildroot.net/buildroot/commit/?id=e4ecf82f99f53e55d51e6f74ae5021473aa2bb1d > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Nicolas Tran is apparently no longer at Smile: > The response from the remote server was: > 450 4.1.1 : Recipient address rejected: User unknown in virtual mailbox table > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:45:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:45:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] DEVELOPERS: remove Joerg Krause Message-ID: <20221015124918.1CDB8864DF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a6e5b67d7c46325ea14447e3f9237514386a345e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x His e-mail server is no longer responsive. Every single day, we get: : connect to embedded.rocks[99.83.154.118]:25: Connection timed out when sending the daily autobuilder report. Signed-off-by: Thomas Petazzoni (cherry picked from commit c6b987f39ddd2abbce526021ccb39bd42e50fa23) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index af21b8bdd0..c7d408dab7 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1567,23 +1567,6 @@ N: Joris Offouga F: package/python-colorlog/ F: package/python-simplelogging/ -N: J??rg Krause -F: board/lemaker/bananapro/ -F: configs/bananapro_defconfig -F: package/augeas/ -F: package/bluez-alsa/ -F: package/caps/ -F: package/freescale-imx/imx-alsa-plugins/ -F: package/libopusenc/ -F: package/libupnpp/ -F: package/luv/ -F: package/luvi/ -F: package/mpd/ -F: package/shairport-sync/ -F: package/swupdate/ -F: package/upmpdcli/ -F: package/wavemon/ - N: Joris Lijssens F: package/emlog/ F: package/libcoap/ From peter at korsgaard.com Sat Oct 15 12:48:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:48:55 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] DEVELOPERS: remove Nicolas Tran Message-ID: <20221015124918.27949864E0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c45cbea560280327a4667d166e8f0cd709a4c55d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Nicolas Tran is apparently no longer at Smile: The response from the remote server was: 450 4.1.1 : Recipient address rejected: User unknown in virtual mailbox table Signed-off-by: Thomas Petazzoni (cherry picked from commit e4ecf82f99f53e55d51e6f74ae5021473aa2bb1d) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 4 ---- 1 file changed, 4 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index c7d408dab7..81f33fe117 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2210,10 +2210,6 @@ N: Nicolas Serafini F: package/exiv2/ F: package/ofono/ -N: Nicolas Tran -F: package/dust/ -F: package/hyperfine/ - N: Niklas Cassel F: configs/qemu_riscv64_nommu_virt_defconfig From peter at korsgaard.com Sat Oct 15 12:44:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:44:06 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/uhd: drop have_mfpu_neon Message-ID: <20221015124918.12165864DA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=678bf71778b102bcb88a5d2802ad8bf43d16fe16 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Drop have_mfpu_neon which has been added by commit b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR have_mfpu_neon Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit 27f6c1ab383ce27236d75526ea881d7c789331a4) Signed-off-by: Peter Korsgaard --- package/uhd/uhd.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/uhd/uhd.mk b/package/uhd/uhd.mk index e8f197f9dd..2a5b69cefb 100644 --- a/package/uhd/uhd.mk +++ b/package/uhd/uhd.mk @@ -36,7 +36,6 @@ ifeq ($(BR2_ARM_CPU_HAS_NEON),y) UHD_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) -mfpu=neon" UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=ON else -UHD_CONF_OPTS += -Dhave_mfpu_neon=0 UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=OFF endif From peter at korsgaard.com Sat Oct 15 12:43:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:43:57 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/uhd: drop have_mfpu_neon Message-ID: <20221015125023.33DF286631@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0fed79d6c7f3d1027da7801926758b4ba57b693e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Drop have_mfpu_neon which has been added by commit b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR have_mfpu_neon Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit 27f6c1ab383ce27236d75526ea881d7c789331a4) Signed-off-by: Peter Korsgaard --- package/uhd/uhd.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/uhd/uhd.mk b/package/uhd/uhd.mk index e8f197f9dd..2a5b69cefb 100644 --- a/package/uhd/uhd.mk +++ b/package/uhd/uhd.mk @@ -36,7 +36,6 @@ ifeq ($(BR2_ARM_CPU_HAS_NEON),y) UHD_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) -mfpu=neon" UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=ON else -UHD_CONF_OPTS += -Dhave_mfpu_neon=0 UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=OFF endif From peter at korsgaard.com Sat Oct 15 12:46:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:46:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] DEVELOPERS: remove Joerg Krause Message-ID: <20221015125023.496008669C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=75368d47446534a1cd8f0d932882f61df9d35eb3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x His e-mail server is no longer responsive. Every single day, we get: : connect to embedded.rocks[99.83.154.118]:25: Connection timed out when sending the daily autobuilder report. Signed-off-by: Thomas Petazzoni (cherry picked from commit c6b987f39ddd2abbce526021ccb39bd42e50fa23) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index 55e81be072..91707bbc4a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1502,23 +1502,6 @@ N: Joris Offouga F: package/python-colorlog/ F: package/python-simplelogging/ -N: J??rg Krause -F: board/lemaker/bananapro/ -F: configs/bananapro_defconfig -F: package/augeas/ -F: package/bluez-alsa/ -F: package/caps/ -F: package/freescale-imx/imx-alsa-plugins/ -F: package/libopusenc/ -F: package/libupnpp/ -F: package/luv/ -F: package/luvi/ -F: package/mpd/ -F: package/shairport-sync/ -F: package/swupdate/ -F: package/upmpdcli/ -F: package/wavemon/ - N: Joris Lijssens F: package/emlog/ F: package/libcoap/ From peter at korsgaard.com Sat Oct 15 13:01:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:01:21 +0200 Subject: [Buildroot] [PATCH] package/rtl8189es: fix build failure due to wrong endianness In-Reply-To: <20220928192802.437811-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Wed, 28 Sep 2022 21:28:02 +0200") References: <20220928192802.437811-1-giulio.benetti@benettiengineering.com> Message-ID: <87fsfpjl5q.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and > there is no way to override it. So to do this let's add a patch that is > pending upstream[1] to allow to override CFLAGS and then let's undefine > CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk > Fixes: > http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ > [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 > Signed-off-by: Giulio Benetti Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 13:05:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:05:27 +0200 Subject: [Buildroot] [git commit] package/gitlab-runner: fix forcing openssl In-Reply-To: <20221001162812.C44078640A@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 18:27:24 +0200") References: <20221001162812.C44078640A@busybox.osuosl.org> Message-ID: <87bkqdjkyw.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=60f97ad95ad2ec93effed8a41e7d2e6101cd6917 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as > it is part of a choice. Instead, we have a symbol explicitly to force > libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. > Use that. > Reported-by: Yann E. MORIN > Signed-off-by: Giulio Benetti > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 13:04:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:04:27 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/gitlab-runner: fix forcing openssl Message-ID: <20221015130603.11BD5866F7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9c214f41cc34276e1eac35153be539614d0b938 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as it is part of a choice. Instead, we have a symbol explicitly to force libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. Use that. Reported-by: Yann E. MORIN Signed-off-by: Giulio Benetti Signed-off-by: Yann E. MORIN (cherry picked from commit 60f97ad95ad2ec93effed8a41e7d2e6101cd6917) Signed-off-by: Peter Korsgaard --- package/gitlab-runner/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 72c2742562..89e3e87b5c 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_LIBCURL_CURL # runtime select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. select BR2_PACKAGE_OPENSSL # runtime - select BR2_PACKAGE_LIBOPENSSL # runtime + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime help From peter at korsgaard.com Sat Oct 15 12:56:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:56:19 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/rtl8189es: fix build failure due to wrong endianness Message-ID: <20221015130603.07032866F5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c7531673a0f8026574e797cd6d43251bca48dfa8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and there is no way to override it. So to do this let's add a patch that is pending upstream[1] to allow to override CFLAGS and then let's undefine CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk Fixes: http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 79a1c5dcadc97f3dad6d95bea2184a92f991bb04) Signed-off-by: Peter Korsgaard --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ package/rtl8189es/rtl8189es.mk | 8 ++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189es/rtl8189es.mk b/package/rtl8189es/rtl8189es.mk index 2fa6a3a483..cddcb195f9 100644 --- a/package/rtl8189es/rtl8189es.mk +++ b/package/rtl8189es/rtl8189es.mk @@ -8,10 +8,16 @@ RTL8189ES_VERSION = 39c17661136da48f8e9c644194dce6a7f5076896 RTL8189ES_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189ES_VERSION)) RTL8189ES_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189ES_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189ES_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189ES_MODULE_MAKE_OPTS = \ CONFIG_RTL8189ES=m \ KVER=$(LINUX_VERSION_PROBED) \ - KSRC=$(LINUX_DIR) + KSRC=$(LINUX_DIR) \ + USER_EXTRA_CFLAGS="$(RTL8189ES_USER_EXTRA_CLAGS)" define RTL8189ES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_NET) From peter at korsgaard.com Sat Oct 15 13:01:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:01:09 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/rtl8189es: fix build failure due to wrong endianness Message-ID: <20221015130708.ACFAC866FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b8b8214f262d218d219e6bb190c45fb669fbe00 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and there is no way to override it. So to do this let's add a patch that is pending upstream[1] to allow to override CFLAGS and then let's undefine CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk Fixes: http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 79a1c5dcadc97f3dad6d95bea2184a92f991bb04) Signed-off-by: Peter Korsgaard --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ package/rtl8189es/rtl8189es.mk | 8 ++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189es/rtl8189es.mk b/package/rtl8189es/rtl8189es.mk index 2fa6a3a483..cddcb195f9 100644 --- a/package/rtl8189es/rtl8189es.mk +++ b/package/rtl8189es/rtl8189es.mk @@ -8,10 +8,16 @@ RTL8189ES_VERSION = 39c17661136da48f8e9c644194dce6a7f5076896 RTL8189ES_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189ES_VERSION)) RTL8189ES_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189ES_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189ES_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189ES_MODULE_MAKE_OPTS = \ CONFIG_RTL8189ES=m \ KVER=$(LINUX_VERSION_PROBED) \ - KSRC=$(LINUX_DIR) + KSRC=$(LINUX_DIR) \ + USER_EXTRA_CFLAGS="$(RTL8189ES_USER_EXTRA_CLAGS)" define RTL8189ES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_NET) From angelo at amarulasolutions.com Sat Oct 15 14:26:01 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sat, 15 Oct 2022 16:26:01 +0200 Subject: [Buildroot] [PATCH] package/cutekeyboard: new package Message-ID: <20221015142601.4155681-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 40 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..3c5621f76a --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..3d3ec2f858 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 8cbaddc5fbf479d5e20fc88228e9af5928fa5e588052ee496c2f2efbe2afc510 cutekeyboard-afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..3e4c08f44e --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# qt5virtualkeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.25.1 From peter at korsgaard.com Sat Oct 15 14:27:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:27:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20220928213631.14450-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 28 Sep 2022 23:36:31 +0200") References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> Message-ID: <877d11jh5y.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service attack and buffer overflow against TLS 1.3 > servers using session ticket resumption. When built with > --enable-session-ticket and making use of TLS 1.3 server code in > wolfSSL, there is the possibility of a malicious client to craft a > malformed second ClientHello packet that causes the server to crash. > This issue is limited to when using both --enable-session-ticket and TLS > 1.3 on the server side. Users with TLS 1.3 servers, and having > --enable-session-ticket, should update to the latest version of wolfSSL. > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:28:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/dnsmasq: security bump to version 2.87 In-Reply-To: <20220927184401.12423-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Tue, 27 Sep 2022 20:44:01 +0200") References: <20220927184401.12423-1-fontaine.fabrice@gmail.com> Message-ID: <8735bpjh3v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-0934: > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html > - Drop patches (already in version) > - Update hash of COPYING, slight updates: > https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:26:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:26:27 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221015142902.29F4C867FF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4cd106188a876163d5c056ec3c6e9bae0df8e0bb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 2e4c0e722f4d9494c2451458a42d4c4f8ef006ab) Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 14:28:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:33 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/dnsmasq: security bump to version 2.87 Message-ID: <20221015142902.33EC686808@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=47572329d8156ffbd9fffba7c446b577ffb9dfff branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 22d6788619b17ebbe90eeccf7d754a45ab10c05a) Signed-off-by: Peter Korsgaard --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From peter at korsgaard.com Sat Oct 15 14:26:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:26:40 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221015143014.C7CF286ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7e4e084ad663d179d5d48141f01d5579dde16a0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 2e4c0e722f4d9494c2451458a42d4c4f8ef006ab) Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 14:28:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:29 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/dnsmasq: security bump to version 2.87 Message-ID: <20221015143014.D5377866F8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=52340cee491ad5996411a557e9e2f8acd7f83b0d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 22d6788619b17ebbe90eeccf7d754a45ab10c05a) Signed-off-by: Peter Korsgaard --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From peter at korsgaard.com Sat Oct 15 14:32:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:03 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221001213928.6B43A86743@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 23:35:46 +0200") References: <20221001213928.6B43A86743@busybox.osuosl.org> Message-ID: <87y1thi2e4.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=0a397fa6381a4115be22ee9637746bf8c8e1194e > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the > LGPL-3.0+, which is still not completely done 5by some large margin), so > it is still covered by the GPL-3.0+, but has parts already covered by > the LGPL-3.0+. > We so far only listed GPL-3.0+, but we also had the license file for the > LGPL-3.0+. > Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of > the GPL-3.0+, so we already had it listed (note: the package has a > COPYING-GPL, but i's a symlink to COPYING). > Signed-off-by: Gwenhael Goavec-Merou > [yann.morin.1998 at free.fr: > - split out to its own patch > - explain why we don't add COPYING-GPL > ] > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:32:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:42 +0200 Subject: [Buildroot] [git commit] package/volk: needs C++17, not boost In-Reply-To: <20221001213928.61BF486741@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 23:15:58 +0200") References: <20221001213928.61BF486741@busybox.osuosl.org> Message-ID: <87tu45i2d1.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=66215faa5237e3704d55ff171537468079dda9c4 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since volk 2.5.1, C++17 is required, and no Boost component is used > anymore. > Signed-off-by: Gwenhael Goavec-Merou > [yann.morin.1998 at free.fr: split out to its own patch] > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:33:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error In-Reply-To: <20221001222254.142279-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 1 Oct 2022 16:22:54 -0600") References: <20221001222254.142279-1-james.hilliard1@gmail.com> Message-ID: <87pmeti2c6.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Fixes: > package/volk/Config.in:4: syntax error > package/volk/Config.in:3: invalid option > Signed-off-by: James Hilliard Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:33:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:24 +0200 Subject: [Buildroot] [git commit] package/volk: license list is comma-separated In-Reply-To: <20221002113701.4B6648677D@busybox.osuosl.org> (Yann E. MORIN's message of "Sun, 2 Oct 2022 13:35:59 +0200") References: <20221002113701.4B6648677D@busybox.osuosl.org> Message-ID: <87lephi2bv.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Reported-by: Thomas Petazzoni > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:32:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:53 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: fix Config.in syntax error Message-ID: <20221015143434.9BF2D86BF7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5db6d5f143b989495b54c0b5fb751fa355c0c300 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN (cherry picked from commit d395f49acf5222558601eb6d8300248bf7931051) Signed-off-by: Peter Korsgaard --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK From peter at korsgaard.com Sat Oct 15 14:32:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: license list is comma-separated Message-ID: <20221015143434.A9DE386BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=886f8df73158eaf71e55c9a10be7dec1f912419d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Reported-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70) Signed-off-by: Peter Korsgaard --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 038b85ee86..ef18b69b3b 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ +VOLK_LICENSE = GPL-3.0+, LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 14:31:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:31:31 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: fix licensing information Message-ID: <20221015143434.8E1AE86BEA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=881d97d3e60773ad054f58847081e5bc5d2ad65e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the LGPL-3.0+, which is still not completely done by some large margin), so it is still covered by the GPL-3.0+, but has parts already covered by the LGPL-3.0+. We so far only listed GPL-3.0+, but we also had the license file for the LGPL-3.0+. Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of the GPL-3.0+, so we already had it listed (note: the package has a COPYING-GPL, but i's a symlink to COPYING). Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: - split out to its own patch - explain why we don't add COPYING-GPL ] Signed-off-by: Yann E. MORIN (cherry picked from commit 0a397fa6381a4115be22ee9637746bf8c8e1194e) Signed-off-by: Peter Korsgaard --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 1b36ea69c8..038b85ee86 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 14:31:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:31:02 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: needs C++17, not boost Message-ID: <20221015143434.8094486BE3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=207ffb044339bf063e2bd15c6863deb5c0edb2fa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since volk 2.5.1, C++17 is required, and no Boost component is used anymore. Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN (cherry picked from commit 66215faa5237e3704d55ff171537468079dda9c4) Signed-off-by: Peter Korsgaard --- package/volk/Config.in | 9 ++------- package/volk/volk.mk | 2 +- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 95b4a8bdb5..83d58d64ab 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,20 +1,15 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK bool "volk" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() - depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem - select BR2_PACKAGE_BOOST - select BR2_PACKAGE_BOOST_FILESYSTEM - select BR2_PACKAGE_BOOST_SYSTEM help VOLK is the Vector-Optimized Library of Kernels. It is a library that contains kernels of hand-written SIMD code diff --git a/package/volk/volk.mk b/package/volk/volk.mk index e7b004b87f..1b36ea69c8 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -15,7 +15,7 @@ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO # host-python-mako are needed for volk to compile -VOLK_DEPENDENCIES = host-python3 host-python-mako boost +VOLK_DEPENDENCIES = host-python3 host-python-mako VOLK_CONF_OPTS = \ -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ From peter at korsgaard.com Sat Oct 15 14:33:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:56 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 Message-ID: <20221015143434.B659486BE3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5c6d67cfe144e7ee4f2f3fb3a311d67e0b6b7935 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for 5.17.x headers). Signed-off-by: Peter Korsgaard (cherry picked from commit 484b50507f31e90a3f955698ad10e7aad6f91b37) Signed-off-by: Peter Korsgaard --- toolchain/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/toolchain/Config.in b/toolchain/Config.in index b48c69dc41..219578092b 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -580,6 +580,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 default "5.14" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 From peter at korsgaard.com Sat Oct 15 15:03:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:03:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 In-Reply-To: <20221002211910.9526-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 2 Oct 2022 23:19:10 +0200") References: <20221002211910.9526-1-fontaine.fabrice@gmail.com> Message-ID: <87h705i0xl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 > https://github.com/emikulic/darkhttpd/releases/tag/v1.14 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:03:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:03:00 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/darkhttpd: security bump to version 1.14 Message-ID: <20221015150406.6DB2686BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb4607da1f23ba3d447122d156c3abb39982a70e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit cced5b68acba02abfd72f66264faed60f4bfd65a) Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From dario.binacchi at amarulasolutions.com Sat Oct 15 15:07:02 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:07:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/uuu: bump to version 1.5.4 Message-ID: <20221015150702.3645905-1-dario.binacchi@amarulasolutions.com> - Fix memory leak cause by getaddrinfo - Fix crash when last block actual size < m_output_size - Add -dm to disable small memory for debug purpose - Fix a dead lock when reset stream - Stop http download when error happen - Add error check for all request_data - Fix linux build warning - Add gzip stream support - Rework buffer management to support small memory version - Fix support of empty environment variables in Windows OS - Fix crash when environment variable is last word in script - Fix update libusb path - Update libusb submodule - Drop vs2017 support. - Use $(DefaultPlatformToolset) - Try remove PlatformToolset and set WindowsTargetPlatformVersion to 10.0 Signed-off-by: Dario Binacchi --- package/uuu/uuu.hash | 2 +- package/uuu/uuu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uuu/uuu.hash b/package/uuu/uuu.hash index de00c649b12b..50da0f9bf3d9 100644 --- a/package/uuu/uuu.hash +++ b/package/uuu/uuu.hash @@ -1,4 +1,4 @@ # locally computed -sha256 9fcfe317c379be1e274aae34c19e1fd57188107f8fd0cdd379fe4473aacc92b1 uuu_source-1.4.243.tar.gz +sha256 baaf3e031958075b96530d43d7435f19cb428088894066e0b02349a3b9666666 uuu_source-1.5.4.tar.gz sha256 cc8d47f7b9260f6669ecd41c24554c552f17581d81ee8fc602c6d23edb8bf495 LICENSE sha256 584bfbb18b4c08b872d48b80419dd453307212a144134fb516bd6ddc0700c2e8 README.md diff --git a/package/uuu/uuu.mk b/package/uuu/uuu.mk index 7ed2599598c0..681c1fbc44e5 100644 --- a/package/uuu/uuu.mk +++ b/package/uuu/uuu.mk @@ -4,7 +4,7 @@ # ################################################################################ -UUU_VERSION = 1.4.243 +UUU_VERSION = 1.5.4 UUU_SOURCE = uuu_source-$(UUU_VERSION).tar.gz UUU_SITE = https://github.com/NXPmicro/mfgtools/releases/download/uuu_$(UUU_VERSION) UUU_LICENSE = BSD 3-Clause "New" or "Revised" License -- 2.32.0 From peter at korsgaard.com Sat Oct 15 15:08:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:08:32 +0200 Subject: [Buildroot] [PATCH 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221004133057.2003750-2-aperez@igalia.com> (Adrian Perez de Castro's message of "Tue, 4 Oct 2022 16:30:53 +0300") References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-2-aperez@igalia.com> Message-ID: <87czati0pb.fsf@dell.be.48ers.dk> >>>>> "Adrian" == Adrian Perez de Castro writes: > Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. > Release notes: > https://wpewebkit.org/release/wpewebkit-2.36.8.html > Accompanying security advisory: > https://wpewebkit.org/security/WSA-2022-0009.html > This also imports a build fix for ARM NEON targets. > Signed-off-by: Adrian Perez de Castro Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:04:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:42 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221015150850.8866A86BFF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=403b05553911374f537781adb0c977c93bc6f61e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard (cherry picked from commit fc523deaf9e2e83a69ef54a2eee965e3b618a758) Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:04:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:16 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/meson: bump to version 0.63.3 Message-ID: <20221015151003.7709E86D0D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f6aa94404a360c56985646630be26fca273f252 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard (cherry picked from commit ee62626e161298854e5cbebb02e07a59abee379a) Signed-off-by: Peter Korsgaard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING From peter at korsgaard.com Sat Oct 15 14:35:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:35:04 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/darkhttpd: security bump to version 1.14 Message-ID: <20221015151003.682F986D0A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=97ed4863da04e271f45db6715db975642c34bc04 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit cced5b68acba02abfd72f66264faed60f4bfd65a) Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From peter at korsgaard.com Sat Oct 15 15:04:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:37 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221015151003.85F9586D13@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=281f923449594506058e7e418fd3a5d5a49579cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard (cherry picked from commit fc523deaf9e2e83a69ef54a2eee965e3b618a758) Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:13 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:13 +0200 Subject: [Buildroot] [RESEND PATCH v7 0/2] Add support for BSH smm s2 [pro] boards Message-ID: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> The series adds support to BSH smm s2 [pro] boards. Changes in v7: - Add Giulio Benetti Reviewed-by tag. - Add Heiko Thiery Reviewed-by tag. Changes in v6: - Change offset in imx-boot partition of genimage.cfg from 33k to 32k. Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. - Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch. - Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering. - Add patchwork link to U-boot patch. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. - Shrink the Linux configuration. - Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log. - Add lore.kernel.org links to the submitted patches. - Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. - Remove U-Boot patches merged in version 2022-07. - Update the Linux patches. Changes in v2: - Drop the patch that added the 'uuu' package. It has been merged. - Patch 1/2: "configs/imx8mn_bsh_smm_s2_defconfig: new defconfig": - Change commit subject and description. - Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version. - Replace `Co-developed-by:' tag with `Co-authored-by'. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. - Remove useless and deprecated statements in nand-full.lst. - Remove the buildroot configurations for ext2/ext4 filesystem creation. - Patch 2/2: "configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig": - Change commit subject line. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. Dario Binacchi (1): configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Michael Trimarchi (1): configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig DEVELOPERS | 8 + .../common/imx8mn-bsh-smm-s2/linux.fragment | 895 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 + board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 + board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 + board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 ++ board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 45 + ...2-dmaengine-mxs-fix-section-mismatch.patch | 39 + ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 + 17 files changed, 1489 insertions(+) create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig -- 2.32.0 From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:15 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:15 +0200 Subject: [Buildroot] [RESEND PATCH v7 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig In-Reply-To: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> References: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> Message-ID: <20221015152015.3647735-3-dario.binacchi@amarulasolutions.com> From: Michael Trimarchi BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance. Board support package includes the following components: - mainline Linux kernel 5.19.7 - mainline U-Boot 2022-07 - Default packages from buildroot https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/ Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline Build and tested using: docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314 Cc: Ariel D'Alessandro Cc: Jagan Teki Cc: Heiko Thiery Cc: Giulio Benetti Reviewed-by: Giulio Benetti Reviewed-by: Heiko Thiery Signed-off-by: Michael Trimarchi Tested-by: Ariel D'Alessandro Signed-off-by: Dario Binacchi --- Changes in v7: - Add Heiko Thiery Reviewed-by tag. Changes in v6: - Change offset in imx-boot partition of genimage.cfg from 33k to 32k. Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. Changes in v2: - Change commit subject line. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. Signed-off-by: Dario Binacchi --- DEVELOPERS | 4 + .../imx8mn-bsh-smm-s2/linux.fragment | 0 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++ board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++ board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++ configs/imx8mn_bsh_smm_s2_defconfig | 2 +- configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++ 10 files changed, 173 insertions(+), 1 deletion(-) rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%) create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index d63cb22cce1d..cb2c10d322fb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -216,6 +216,8 @@ F: configs/snps_archs38_haps_defconfig F: configs/snps_archs38_hsdk_defconfig N: Ariel D'Alessandro +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/axfsutils/ F: package/mali-t76x/ @@ -675,6 +677,7 @@ F: package/xinetd/ N: Dario Binacchi F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/uuu/ N: Dario Binacchi @@ -2108,6 +2111,7 @@ F: package/python-pyzmq/ N: Michael Trimarchi F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/python-spidev/ N: Michael Vetter diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment similarity index 100% rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file mode 100644 index 000000000000..911135474253 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf @@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb + append root=PARTUUID=%PARTUUID% rootwait rw diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file mode 100755 index 000000000000..17b20f009771 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh @@ -0,0 +1,23 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/sdcard.img + diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file mode 100644 index 000000000000..10c52548cdfa --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg @@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 32K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +} diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file mode 100755 index 000000000000..bf8861f6a914 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh @@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" +PARTUUID="$($HOST_DIR/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg" diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file mode 100755 index 000000000000..3452fd4501f8 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file mode 100644 index 000000000000..5763f164fe13 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt @@ -0,0 +1,73 @@ +i.MX8MN BSH SMM S2 PRO +====================== + +How to build it +--------------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_pro_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ??? bl31.bin + ??? Image + ??? flash.bin + ??? ddr3* + ??? rootfs.ext2 + ??? rootfs.ext4 -> rootfs.ext2 + ??? rootfs.tar + ??? sdcard.img + ??? u-boot.bin + ??? u-boot-nodtb.bin + ??? u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing the emmc card image +---------------------------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ fastboot usb 0 + +Flash the images on eMMC. On your computer, run: + + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/ + + +Booting the board +----------------- + +By default the bootloader will search for the first valid image, +starting with the internal eMMC. diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 7f6023c64b45..298eba2c25f0 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig new file mode 100644 index 000000000000..97796dd01277 --- /dev/null +++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig @@ -0,0 +1,41 @@ +BR2_aarch64=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UUU=y -- 2.32.0 From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:14 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:14 +0200 Subject: [Buildroot] [RESEND PATCH v7 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig In-Reply-To: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> References: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> Message-ID: <20221015152015.3647735-2-dario.binacchi@amarulasolutions.com> BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance. Board support package includes the following components: - mainline Linux kernel 5.19.7 - mainline U-Boot 2022-07 - default packages from buildroot Patches applied to the Linux kernel and U-Boot have been submitted but not merged yet. https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/ The smm s2 board is basically the same as the pro except it boots from NAND instead of eMMC. Co-authored-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Reviewed-by: Giulio Benetti --- Changes in v7: - Add Giulio Benetti Reviewed-by tag. (no changes since v5) Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. - Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch. - Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering. - Add patchwork link to U-boot patch. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. - Shrink the Linux configuration. - Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log. - Add lore.kernel.org links to the submitted patches. - Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. - Remove U-Boot patches merged in version 2022-07. - Update the Linux patches. Changes in v2: - Change commit subject and description. - Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version. - Replace `Co-developed-by:' tag with `Co-authored-by'. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. - Remove useless and deprecated statements in nand-full.lst. - Remove the buildroot configurations for ext2/ext4 filesystem creation. Signed-off-by: Dario Binacchi --- DEVELOPERS | 4 + board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 895 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 45 + ...2-dmaengine-mxs-fix-section-mismatch.patch | 39 + ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + 10 files changed, 1317 insertions(+) create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index d2bd0d809a6a..d63cb22cce1d 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -673,6 +673,8 @@ F: package/luaexpat/ F: package/xinetd/ N: Dario Binacchi +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/uuu/ N: Dario Binacchi @@ -2104,6 +2106,8 @@ F: package/python-crc16/ F: package/python-pyzmq/ N: Michael Trimarchi +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/python-spidev/ N: Michael Vetter diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh new file mode 100755 index 000000000000..1f343d516dcf --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh @@ -0,0 +1,26 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/rootfs.ubifs \ + ${IMAGES_DIR}/Image \ + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb + diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file mode 100644 index 000000000000..80803ab08886 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment @@ -0,0 +1,895 @@ +# CONFIG_BPF_SYSCALL is not set +CONFIG_TASK_DELAY_ACCT=y +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_BPF is not set +CONFIG_RELAY=y +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_APPLE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM4908 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_INTEL_SOCFPGA is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_TESLA_FSD is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_KEXEC is not set +# CONFIG_KEXEC_FILE is not set +# CONFIG_XEN is not set +# CONFIG_ARM64_PTR_AUTH is not set +# CONFIG_ARM64_TLB_RANGE is not set +# CONFIG_ARM64_MTE is not set +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +# CONFIG_HIBERNATION is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set +CONFIG_ARM_IMX_CPUFREQ_DT=y +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set +# CONFIG_ARM_SCMI_CPUFREQ is not set +# CONFIG_ARM_TEGRA186_CPUFREQ is not set +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_ACPI_APEI_PCIEAER is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_GCC_PLUGINS is not set +CONFIG_IPV6=y +CONFIG_MODVERSIONS=y +CONFIG_IPV6_SIT=m +CONFIG_NET_DSA_TAG_OCELOT=m +CONFIG_VLAN_8021Q=y +CONFIG_LLC2=y +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_PKTGEN=m +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +# CONFIG_CAN_RCAR is not set +# CONFIG_CAN_RCAR_CANFD is not set +# CONFIG_CAN_MCP251XFD is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIVHCI=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_MRVL_SDIO is not set +# CONFIG_BT_QCOMSMD is not set +# CONFIG_RFKILL is not set +# CONFIG_PCI is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIEAER is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PASID is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_PCI_AARDVARK is not set +# CONFIG_PCI_TEGRA is not set +# CONFIG_PCIE_RCAR_HOST is not set +# CONFIG_PCIE_RCAR_EP is not set +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_XGENE is not set +# CONFIG_PCIE_ALTERA is not set +# CONFIG_PCIE_ALTERA_MSI is not set +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +# CONFIG_PCIE_ROCKCHIP_HOST is not set +# CONFIG_PCIE_BRCMSTB is not set +# CONFIG_PCI_IMX6 is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCI_HISI is not set +# CONFIG_PCIE_QCOM is not set +# CONFIG_PCIE_ARMADA_8K is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_HISI_STB is not set +# CONFIG_PCIE_TEGRA194_HOST is not set +# CONFIG_PCIE_VISCONTI_HOST is not set +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set +# CONFIG_PCI_ENDPOINT is not set +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set +# CONFIG_PCI_EPF_TEST is not set +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +CONFIG_BRCMSTB_GISB_ARB=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_HISILICON_LPC is not set +# CONFIG_TEGRA_ACONNECT is not set +# CONFIG_RASPBERRYPI_FIRMWARE is not set +# CONFIG_INTEL_STRATIX10_SERVICE is not set +# CONFIG_INTEL_STRATIX10_RSU is not set +CONFIG_IMX_DSP=y +# CONFIG_GNSS is not set +# CONFIG_GNSS_MTK_SERIAL is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_NAND_BRCMNAND is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_MARVELL is not set +# CONFIG_MTD_NAND_FSL_IFC is not set +# CONFIG_MTD_NAND_QCOM is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_MTD_UBI=y +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_RAID_ATTRS=m +# CONFIG_SCSI_HISI_SAS_PCI is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_UFS_QCOM is not set +# CONFIG_SCSI_UFS_HISI is not set +# CONFIG_SCSI_UFS_EXYNOS is not set +# CONFIG_SATA_AHCI is not set +CONFIG_AHCI_IMX=y +# CONFIG_AHCI_BRCM is not set +# CONFIG_AHCI_MVEBU is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_RCAR is not set +CONFIG_DM_CRYPT=m +# CONFIG_NET_DSA_BCM_SF2 is not set +# CONFIG_NET_DSA_MSCC_FELIX is not set +# CONFIG_NET_XGENE is not set +# CONFIG_ATL1C is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNX2X is not set +# CONFIG_THUNDER_NIC_PF is not set +CONFIG_FSL_XGMAC_MDIO=y +CONFIG_FSL_ENETC_IERB=y +# CONFIG_FSL_FMAN is not set +# CONFIG_FSL_DPAA_ETH is not set +# CONFIG_FSL_DPAA2_ETH is not set +# CONFIG_FSL_ENETC is not set +# CONFIG_FSL_ENETC_VF is not set +# CONFIG_FSL_ENETC_QOS is not set +CONFIG_MVMDIO=y +CONFIG_MSCC_OCELOT_SWITCH=m +# CONFIG_HNS3 is not set +# CONFIG_HNS3_HCLGE is not set +# CONFIG_HNS3_ENET is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_MVNETA is not set +# CONFIG_MVPP2 is not set +# CONFIG_SKY2 is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLX5_CORE_EN is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +# CONFIG_RAVB is not set +CONFIG_STMMAC_ETH=y +CONFIG_DWMAC_GENERIC=m +CONFIG_MICROCHIP_PHY=y +CONFIG_NXP_TJA11XX_PHY=y +CONFIG_MDIO_BITBANG=y +# CONFIG_SNI_AVE is not set +# CONFIG_SNI_NETSEC is not set +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set +# CONFIG_QCOM_IPA is not set +# CONFIG_MESON_GXL_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_BCM54140_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MARVELL_10G_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_ROCKCHIP_PHY is not set +# CONFIG_DP83867_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_USB_BRCMSTB is not set +CONFIG_USB_RTL8152=y +CONFIG_USB_USBNET=y +CONFIG_BRCMFMAC=y +CONFIG_HOSTAP=y +# CONFIG_ATH10K is not set +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_SNOC is not set +# CONFIG_WCN36XX is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWIFIEX_SDIO is not set +# CONFIG_MWIFIEX_PCIE is not set +CONFIG_KEYBOARD_SNVS_PWRKEY=y +# CONFIG_KEYBOARD_IMX_SC_KEY is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_INPUT_PM8941_PWRKEY is not set +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_HISI_POWERKEY is not set +# CONFIG_SERIAL_8250_BCM2835AUX is not set +# CONFIG_SERIAL_8250_OMAP is not set +# CONFIG_SERIAL_8250_MT6577 is not set +# CONFIG_SERIAL_8250_UNIPHIER is not set +# CONFIG_SERIAL_MESON is not set +# CONFIG_SERIAL_MESON_CONSOLE is not set +# CONFIG_SERIAL_SAMSUNG is not set +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set +# CONFIG_SERIAL_TEGRA is not set +# CONFIG_SERIAL_TEGRA_TCU is not set +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_MSM is not set +# CONFIG_SERIAL_MSM_CONSOLE is not set +# CONFIG_SERIAL_QCOM_GENI is not set +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set +# CONFIG_SERIAL_MVEBU_UART is not set +# CONFIG_SERIAL_OWL is not set +# CONFIG_I2C_MUX is not set +# CONFIG_I2C_BCM2835 is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_MT65XX is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_OWL is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_QCOM_CCI is not set +# CONFIG_I2C_QCOM_GENI is not set +# CONFIG_I2C_QUP is not set +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_S3C2410 is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_TEGRA is not set +# CONFIG_I2C_UNIPHIER_F is not set +# CONFIG_I2C_RCAR is not set +# CONFIG_SPI_ARMADA_3700 is not set +# CONFIG_SPI_BCM2835 is not set +# CONFIG_SPI_BCM2835AUX is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_DW_DMA is not set +# CONFIG_SPI_DW_MMIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_ORION is not set +CONFIG_SPI_SPIDEV=y +CONFIG_SPI_SLAVE=y +CONFIG_SPI_SLAVE_TIME=y +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y +CONFIG_PINCTRL=y +# CONFIG_SPI_RPCIF is not set +# CONFIG_SPI_RSPI is not set +# CONFIG_SPI_QCOM_QSPI is not set +# CONFIG_SPI_QUP is not set +# CONFIG_SPI_QCOM_GENI is not set +# CONFIG_SPI_S3C64XX is not set +# CONFIG_SPI_SH_MSIOF is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPMI is not set +# CONFIG_PINCTRL_OWL is not set +# CONFIG_PINCTRL_S700 is not set +# CONFIG_PINCTRL_S900 is not set +CONFIG_GPIOLIB=y +# CONFIG_PINCTRL_MSM is not set +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_QDF2XXX is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SC7280 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +# CONFIG_PINCTRL_SM8350 is not set +# CONFIG_PINCTRL_SM8450 is not set +# CONFIG_PINCTRL_LPASS_LPI is not set +# CONFIG_GPIO_DAVINCI is not set +# CONFIG_GPIO_MPC8XXX is not set +# CONFIG_GPIO_RCAR is not set +# CONFIG_GPIO_UNIPHIER is not set +# CONFIG_GPIO_VISCONTI is not set +# CONFIG_GPIO_XGENE_SB is not set +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_GPIO_MAX77620 is not set +# CONFIG_GPIO_SL28CPLD is not set +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_BQ25980 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set +# CONFIG_SENSORS_SL28CPLD is not set +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_IMX_SC_THERMAL=y +CONFIG_IMX8MM_THERMAL=y +CONFIG_QORIQ_THERMAL=y +# CONFIG_SUN8I_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +# CONFIG_RCAR_GEN3_THERMAL is not set +# CONFIG_RZG2L_THERMAL is not set +# CONFIG_ARMADA_THERMAL is not set +# CONFIG_BCM2711_THERMAL is not set +# CONFIG_BCM2835_THERMAL is not set +# CONFIG_BRCMSTB_THERMAL is not set +# CONFIG_EXYNOS_THERMAL is not set +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_TEGRA_BPMP_THERMAL is not set +# CONFIG_QCOM_TSENS is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_QCOM_LMH is not set +# CONFIG_UNIPHIER_THERMAL is not set +# CONFIG_SL28CPLD_WATCHDOG is not set +# CONFIG_S3C2410_WATCHDOG is not set +# CONFIG_BCM7038_WDT is not set +# CONFIG_SUNXI_WATCHDOG is not set +CONFIG_IMX_SC_WDT=y +CONFIG_IMX7ULP_WDT=y +# CONFIG_QCOM_WDT is not set +# CONFIG_MESON_GXBB_WATCHDOG is not set +# CONFIG_MESON_WATCHDOG is not set +# CONFIG_RENESAS_WDT is not set +# CONFIG_RENESAS_RZG2LWDT is not set +# CONFIG_UNIPHIER_WATCHDOG is not set +# CONFIG_BCM2835_WDT is not set +# CONFIG_MFD_ALTERA_SYSMGR is not set +# CONFIG_MFD_AXP20X_RSB is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_HI655X_PMIC is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_SPMI_PMIC is not set +# CONFIG_MFD_SL28CPLD is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_HI655X is not set +# CONFIG_REGULATOR_MP8859 is not set +# CONFIG_REGULATOR_MT6358 is not set +# CONFIG_REGULATOR_MT6397 is not set +# CONFIG_REGULATOR_PF8X00 is not set +# CONFIG_REGULATOR_QCOM_RPMH is not set +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set +# CONFIG_REGULATOR_QCOM_SPMI is not set +# CONFIG_REGULATOR_TPS65132 is not set +CONFIG_MEDIA_SUPPORT=y +# CONFIG_RC_CORE is not set +# CONFIG_RC_DECODERS is not set +# CONFIG_RC_DEVICES is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_SUNXI is not set +CONFIG_SDR_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_QCOM_CAMSS is not set +# CONFIG_VIDEO_RCAR_CSI2 is not set +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SUN6I_CSI is not set +# CONFIG_VIDEO_RCAR_ISP is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set +# CONFIG_VIDEO_RENESAS_FDP1 is not set +# CONFIG_VIDEO_RENESAS_FCP is not set +# CONFIG_VIDEO_RENESAS_VSP1 is not set +# CONFIG_VIDEO_QCOM_VENUS is not set +# CONFIG_VIDEO_RCAR_DRIF is not set +CONFIG_VIDEO_OV5640=y +CONFIG_DRM=y +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_EXYNOS5433_DECON is not set +# CONFIG_DRM_EXYNOS7_DECON is not set +# CONFIG_DRM_EXYNOS_DSI is not set +# CONFIG_DRM_EXYNOS_DP is not set +# CONFIG_DRM_EXYNOS_HDMI is not set +# CONFIG_DRM_EXYNOS_MIC is not set +# CONFIG_DRM_ROCKCHIP is not set +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set +# CONFIG_ROCKCHIP_CDN_DP is not set +# CONFIG_ROCKCHIP_DW_HDMI is not set +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set +# CONFIG_ROCKCHIP_INNO_HDMI is not set +# CONFIG_ROCKCHIP_LVDS is not set +# CONFIG_DRM_RCAR_DU is not set +# CONFIG_DRM_RCAR_MIPI_DSI is not set +# CONFIG_DRM_SUN4I is not set +# CONFIG_DRM_SUN6I_DSI is not set +# CONFIG_DRM_SUN8I_DW_HDMI is not set +# CONFIG_DRM_SUN8I_MIXER is not set +# CONFIG_DRM_MSM is not set +# CONFIG_DRM_TEGRA is not set +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_EDP is not set +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set +CONFIG_DRM_DISPLAY_CONNECTOR=m +# CONFIG_DRM_LONTIUM_LT8912B is not set +CONFIG_DRM_NWL_MIPI_DSI=y +# CONFIG_DRM_LONTIUM_LT9611UXC is not set +# CONFIG_DRM_PARADE_PS8640 is not set +CONFIG_DRM_I2C_ADV7511=y +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +CONFIG_DRM_IMX_DCSS=y +# CONFIG_DRM_VC4 is not set +# CONFIG_DRM_HISI_HIBMC is not set +CONFIG_DRM_MXSFB=y +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_MEDIATEK_HDMI is not set +# CONFIG_DRM_MESON is not set +CONFIG_DRM_LEGACY=y +# CONFIG_FB is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_EFI is not set +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_LOGO is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_HDA_TEGRA is not set +# CONFIG_SND_HDA_CODEC_HDMI is not set +CONFIG_SND_SOC_FSL_ASRC=y +CONFIG_SND_SOC_FSL_EASRC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_FSL_ASOC_CARD=y +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_OF=m +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y +CONFIG_SND_SOC_AK4458=y +CONFIG_SND_SOC_AK5558=y +CONFIG_SND_SOC_PCM512x_I2C=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_SND_AUDIO_GRAPH_CARD=y +CONFIG_USB_CONN_GPIO=y +# CONFIG_SND_BCM2835_SOC_I2S is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_SGTL5000 is not set +# CONFIG_SND_SOC_IMX_SPDIF is not set +# CONFIG_SND_SOC_IMX_AUDMIX is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_GX_SOUND_CARD is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_APQ8016_SBC is not set +# CONFIG_SND_SOC_MSM8996 is not set +# CONFIG_SND_SOC_SDM845 is not set +# CONFIG_SND_SOC_SM8250 is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set +# CONFIG_SND_SOC_SAMSUNG is not set +# CONFIG_SND_SOC_RCAR is not set +# CONFIG_SND_SOC_RZ is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_TEGRA210_AHUB is not set +# CONFIG_SND_SOC_TEGRA210_DMIC is not set +# CONFIG_SND_SOC_TEGRA210_I2S is not set +# CONFIG_SND_SOC_TEGRA186_DSPK is not set +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set +# CONFIG_SND_SOC_TEGRA210_MVC is not set +# CONFIG_SND_SOC_TEGRA210_SFC is not set +# CONFIG_SND_SOC_TEGRA210_AMX is not set +# CONFIG_SND_SOC_TEGRA210_ADX is not set +# CONFIG_SND_SOC_TEGRA210_MIXER is not set +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_RT5659 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIMPLE_MUX is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_WCD934X is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WSA881X is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_I2C_HID_ACPI is not set +# CONFIG_I2C_HID_OF is not set +# CONFIG_USB_XHCI_PCI_RENESAS is not set +# CONFIG_USB_XHCI_TEGRA is not set +# CONFIG_USB_EHCI_EXYNOS is not set +# CONFIG_USB_OHCI_EXYNOS is not set +CONFIG_USB_HCD_TEST_MODE=y +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_RENESAS_USBHS is not set +CONFIG_USB_UAS=y +# CONFIG_USB_CDNS_SUPPORT is not set +# CONFIG_USB_CDNS3 is not set +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +# CONFIG_USB_MTU3 is not set +# CONFIG_USB_MUSB_SUNXI is not set +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=y +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_MXS_PHY=y +CONFIG_USB_ULPI=y +CONFIG_USB_SNP_UDC_PLAT=y +CONFIG_USB_BDC_UDC=y +CONFIG_USB_CONFIGFS=y +# CONFIG_USB_RENESAS_USBHS_UDC is not set +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_TEGRA_XUDC is not set +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_UVC=y +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +# CONFIG_TYPEC_TPS6598X is not set +# CONFIG_MMC_SDHCI_ACPI is not set +# CONFIG_MMC_SDHCI_TEGRA is not set +# CONFIG_MMC_MESON_GX is not set +# CONFIG_MMC_SDHCI_MSM is not set +# CONFIG_MMC_SDHI is not set +# CONFIG_MMC_UNIPHIER is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SUNXI is not set +# CONFIG_MMC_BCM2835 is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_OWL is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_EDAC_LAYERSCAPE is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set +# CONFIG_RTC_DRV_S3C is not set +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_IMX_SC=y +# CONFIG_RTC_DRV_SUN6I is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +# CONFIG_RTC_DRV_TEGRA is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_MT6397 is not set +CONFIG_BCM_SBA_RAID=m +# CONFIG_DMA_BCM2835 is not set +# CONFIG_DMA_SUN6I is not set +CONFIG_FSL_QDMA=m +CONFIG_IMX_SDMA=y +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +CONFIG_MXS_DMA=y +# CONFIG_OWL_DMA is not set +# CONFIG_TEGRA186_GPC_DMA is not set +# CONFIG_TEGRA20_APB_DMA is not set +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_QCOM_BAM_DMA is not set +CONFIG_DMATEST=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y +# CONFIG_RCAR_DMAC is not set +# CONFIG_RENESAS_USB_DMAC is not set +# CONFIG_RZ_DMAC is not set +# CONFIG_TI_K3_UDMA is not set +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set +# CONFIG_VFIO_PCI is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_VIDEO_HANTRO is not set +# CONFIG_VIDEO_IMX_MEDIA is not set +# CONFIG_COMMON_CLK_SCMI is not set +# CONFIG_COMMON_CLK_FSL_SAI is not set +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_CLK_RASPBERRYPI is not set +# CONFIG_CLK_IMX8MM is not set +# CONFIG_CLK_IMX8MP is not set +# CONFIG_CLK_IMX8MQ is not set +# CONFIG_CLK_IMX8QXP is not set +# CONFIG_CLK_IMX8ULP is not set +# CONFIG_TI_SCI_CLK is not set +# CONFIG_COMMON_CLK_QCOM is not set +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_SMD_RPM is not set +# CONFIG_QCOM_CLK_RPMH is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_QCS_GCC_404 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GCC_7280 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SM_GCC_8350 is not set +# CONFIG_SM_GCC_8450 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_CLK_GFM_LPASS_SM8250 is not set +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set +# CONFIG_HWSPINLOCK_QCOM is not set +# CONFIG_RENESAS_OSTM is not set +# CONFIG_BCM2835_MBOX is not set +# CONFIG_QCOM_APCS_IPC is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_ROCKCHIP_IOMMU is not set +# CONFIG_TEGRA_IOMMU_SMMU is not set +# CONFIG_MTK_IOMMU is not set +# CONFIG_QCOM_IOMMU is not set +CONFIG_IMX_REMOTEPROC=y +CONFIG_IMX_DSP_REMOTEPROC=y +CONFIG_RPMSG_CHAR=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +# CONFIG_QCOM_SYSMON is not set +# CONFIG_QCOM_WCNSS_PIL is not set +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set +# CONFIG_RPMSG_QCOM_SMD is not set +CONFIG_SOC_BRCMSTB=y +# CONFIG_OWL_PM_DOMAINS is not set +# CONFIG_RASPBERRYPI_POWER is not set +# CONFIG_FSL_DPAA is not set +# CONFIG_FSL_MC_DPIO is not set +CONFIG_SOC_TI=y +# CONFIG_MTK_DEVAPC is not set +# CONFIG_MTK_PMIC_WRAP is not set +# CONFIG_QCOM_AOSS_QMP is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +# CONFIG_QCOM_RPMHPD is not set +# CONFIG_QCOM_RPMPD is not set +# CONFIG_QCOM_SMEM is not set +# CONFIG_QCOM_SMD_RPM is not set +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_SOCINFO is not set +# CONFIG_QCOM_STATS is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_APR is not set +# CONFIG_ARCH_R8A77995 is not set +# CONFIG_ARCH_R8A77990 is not set +# CONFIG_ARCH_R8A77950 is not set +# CONFIG_ARCH_R8A77951 is not set +# CONFIG_ARCH_R8A77965 is not set +# CONFIG_ARCH_R8A77960 is not set +# CONFIG_ARCH_R8A77961 is not set +# CONFIG_ARCH_R8A779F0 is not set +# CONFIG_ARCH_R8A77980 is not set +# CONFIG_ARCH_R8A77970 is not set +# CONFIG_ARCH_R8A779A0 is not set +# CONFIG_ARCH_R8A774C0 is not set +# CONFIG_ARCH_R8A774E1 is not set +# CONFIG_ARCH_R8A774A1 is not set +# CONFIG_ARCH_R8A774B1 is not set +# CONFIG_ARCH_R9A07G044 is not set +# CONFIG_ROCKCHIP_IODOMAIN is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +# CONFIG_ARCH_TEGRA_132_SOC is not set +# CONFIG_ARCH_TEGRA_210_SOC is not set +# CONFIG_ARCH_TEGRA_186_SOC is not set +# CONFIG_ARCH_TEGRA_194_SOC is not set +# CONFIG_ARCH_TEGRA_234_SOC is not set +# CONFIG_TI_SCI_PM_DOMAINS is not set +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set +CONFIG_MEMORY=y +# CONFIG_RENESAS_RPCIF is not set +CONFIG_IMX8QXP_ADC=y +# CONFIG_EXYNOS_ADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_RZG2L_ADC is not set +# CONFIG_TI_ADS1015 is not set +CONFIG_IIO_ST_LSM6DSX=y +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_VCNL4000 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_MPL3115 is not set +# CONFIG_PWM_BCM2835 is not set +# CONFIG_PWM_BRCMSTB is not set +CONFIG_PWM_FSL_FTM=m +CONFIG_PWM_IMX27=y +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_MEDIATEK is not set +# CONFIG_PWM_RCAR is not set +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +# CONFIG_PWM_SAMSUNG is not set +# CONFIG_PWM_SL28CPLD is not set +# CONFIG_PWM_SUN4I is not set +# CONFIG_PWM_TEGRA is not set +# CONFIG_PWM_VISCONTI is not set +# CONFIG_SL28CPLD_INTC is not set +# CONFIG_QCOM_PDC is not set +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set +# CONFIG_RESET_TI_SCI is not set +CONFIG_PHY_CADENCE_SALVO=y +CONFIG_PHY_MIXEL_MIPI_DPHY=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +# CONFIG_PHY_FSL_IMX8M_PCIE is not set +# CONFIG_PHY_HI6220_USB is not set +# CONFIG_PHY_HISTB_COMBPHY is not set +# CONFIG_PHY_HISI_INNO_USB2 is not set +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +# CONFIG_PHY_MTK_TPHY is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_RCAR_GEN3_PCIE is not set +# CONFIG_PHY_RCAR_GEN3_USB2 is not set +# CONFIG_PHY_RCAR_GEN3_USB3 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +# CONFIG_PHY_SAMSUNG_UFS is not set +# CONFIG_PHY_UNIPHIER_USB2 is not set +# CONFIG_PHY_UNIPHIER_USB3 is not set +# CONFIG_PHY_TEGRA_XUSB is not set +# CONFIG_PHY_AM654_SERDES is not set +# CONFIG_PHY_J721E_WIZ is not set +CONFIG_FSL_IMX8_DDR_PMU=y +# CONFIG_QCOM_L2_PMU is not set +# CONFIG_QCOM_L3_PMU is not set +# CONFIG_MTK_EFUSE is not set +# CONFIG_QCOM_QFPROM is not set +# CONFIG_ROCKCHIP_EFUSE is not set +# CONFIG_NVMEM_SUNXI_SID is not set +# CONFIG_UNIPHIER_EFUSE is not set +# CONFIG_MESON_EFUSE is not set +# CONFIG_NVMEM_RMEM is not set +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set +# CONFIG_SLIMBUS is not set +# CONFIG_SLIM_QCOM_NGD_CTRL is not set +# CONFIG_INTERCONNECT_IMX is not set +# CONFIG_INTERCONNECT_IMX8MM is not set +# CONFIG_INTERCONNECT_IMX8MN is not set +# CONFIG_INTERCONNECT_IMX8MQ is not set +# CONFIG_INTERCONNECT_QCOM is not set +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_STREEBOG=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_CCITT=m +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set +CONFIG_IRQ_POLL=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_INFO_REDUCED is not set +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SOURCE_ETM4X=y diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file mode 100644 index 000000000000..c01d2d6c1dac --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst @@ -0,0 +1,29 @@ +# @_flash.bin | bootloader +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader +# @_filesystem | filesystem to burn +# @_kernel | kernel image +# @_dtb | dtb image + +# This command will be run when ROM support stream mode +# i.MX8QXP, i.MX8QM +SDPS: boot -f _flash.bin + +FB: ucmd setenv fastboot_buffer ${loadaddr} +FB: download -f _image +# Burn image to nandfit partition if needed +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} + +FB[-t 10000]: ucmd ubi part nandrootfs +FB[-t 10000]: ucmd ubi create root - +FB: download -f _filesystem +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} + +FB: download -f _kernel +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} + +FB: download -f _dtb +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} + +FB: reboot +FB: done diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file mode 100644 index 000000000000..9293058ef0e1 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch @@ -0,0 +1,45 @@ +From d4872d93ba5f7111562b0ac1cab356f56d01c1b4 Mon Sep 17 00:00:00 2001 +From: Dario Binacchi +Date: Sun, 22 May 2022 17:40:15 +0200 +Subject: [PATCH] dmaengine: mxs: use platform_driver_register + +Driver registration fails on SOC imx8mn as its supplier, the clock +control module, is probed later than subsys initcall level. This driver +uses platform_driver_probe which is not compatible with deferred probing +and won't be probed again later if probe function fails due to clock not +being available at that time. + +This patch replaces the use of platform_driver_probe with +platform_driver_register which will allow probing the driver later again +when the clock control module will be available. + +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") +Co-developed-by: Michael Trimarchi +Signed-off-by: Michael Trimarchi +Signed-off-by: Dario Binacchi +Cc: stable at vger.kernel.org +Link: https://lore.kernel.org/lkml/20220712160909.2054141-1-dario.binacchi at amarulasolutions.com +--- + drivers/dma/mxs-dma.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 994fc4d2aca4..18f8154b859b 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, + }, ++ .probe = mxs_dma_probe, + }; +- +-static int __init mxs_dma_module_init(void) +-{ +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe); +-} +-subsys_initcall(mxs_dma_module_init); ++builtin_platform_driver(mxs_dma_driver); +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file mode 100644 index 000000000000..faf3b7290e68 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch @@ -0,0 +1,39 @@ +From 1322ec115e91419a8f7b7d6d5e36e68316908b5a Mon Sep 17 00:00:00 2001 +From: Dario Binacchi +Date: Tue, 12 Jul 2022 15:15:19 +0200 +Subject: [PATCH] dmaengine: mxs: fix section mismatch + +The patch was suggested by the following modpost warning: + +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe() +The variable mxs_dma_driver references +the function __init mxs_dma_probe() +If the reference is valid then annotate the +variable with __init* or __refdata (see linux/init.h) or name the variable: +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console + +Co-developed-by: Michael Trimarchi +Signed-off-by: Michael Trimarchi +Signed-off-by: Dario Binacchi +Cc: stable at vger.kernel.org +Link: https://lore.kernel.org/linux-arm-kernel/20220712160909.2054141-2-dario.binacchi at amarulasolutions.com/ +--- + drivers/dma/mxs-dma.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 18f8154b859b..a01953e06048 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) + return 0; + } + +-static struct platform_driver mxs_dma_driver = { ++static struct platform_driver mxs_dma_driver __initdata = { + .driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file mode 100644 index 000000000000..59db559b9301 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch @@ -0,0 +1,160 @@ +From 3878b941c6bde84e29b2725e4261d85bea828752 Mon Sep 17 00:00:00 2001 +From: Michael Trimarchi +Date: Sun, 22 May 2022 15:22:08 +0200 +Subject: [PATCH] include/configs: Remove rootwait=1 to all the affected boards + +rootwait=1 is not a valid kernel boot parameters. According +to the documenation is only rootwait + +rootwait [KNL] Wait (indefinitely) for root device to show up. + Useful for devices that are detected asynchronously + (e.g. USB and MMC devices). + +Fix: +Unknown kernel command line parameters "rootwait=1", will be passed to user space. + +Signed-off-by: Michael Trimarchi +Reviewed-by: Heiko Schocher +Link: https://patchwork.ozlabs.org/project/uboot/patch/20220520110013.32811-1-michael at amarulasolutions.com/ +Signed-off-by: Dario Binacchi +--- + include/configs/am335x_evm.h | 2 +- + include/configs/am43xx_evm.h | 2 +- + include/configs/baltos.h | 2 +- + include/configs/chiliboard.h | 2 +- + include/configs/etamin.h | 2 +- + include/configs/imx8mn_bsh_smm_s2.h | 2 +- + include/configs/siemens-am33x-common.h | 4 ++-- + include/configs/ti_armv7_keystone2.h | 2 +- + include/environment/ti/nand.h | 2 +- + 9 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index fd5b209a52db..f301a6dc835b 100644 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -34,7 +34,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h +index 5057441f7506..1f5c3cd04e88 100644 +--- a/include/configs/am43xx_evm.h ++++ b/include/configs/am43xx_evm.h +@@ -166,7 +166,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/baltos.h b/include/configs/baltos.h +index b881d8c03fd7..7b43741fde7c 100644 +--- a/include/configs/baltos.h ++++ b/include/configs/baltos.h +@@ -37,7 +37,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "setenv loadaddr 0x84000000; " \ +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +index 82acda595f09..8bad0f9ac4b6 100644 +--- a/include/configs/chiliboard.h ++++ b/include/configs/chiliboard.h +@@ -20,7 +20,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/etamin.h b/include/configs/etamin.h +index 9cf93924df93..1c0a86d1ed10 100644 +--- a/include/configs/etamin.h ++++ b/include/configs/etamin.h +@@ -113,7 +113,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h +index d09c2ab01610..0dc514f00684 100644 +--- a/include/configs/imx8mn_bsh_smm_s2.h ++++ b/include/configs/imx8mn_bsh_smm_s2.h +@@ -22,7 +22,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr_r} nanddtb; " \ +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h +index 08c4d52d658f..9f1a6cd51b40 100644 +--- a/include/configs/siemens-am33x-common.h ++++ b/include/configs/siemens-am33x-common.h +@@ -237,7 +237,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_active_ubi_vol_A=rootfs_a\0" \ + "nand_active_ubi_vol_B=rootfs_b\0" \ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_A=0x280000\0" \ + "nand_src_addr_B=0x780000\0" \ +@@ -314,7 +314,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h +index 57f013cbf846..133daecf7164 100644 +--- a/include/configs/ti_armv7_keystone2.h ++++ b/include/configs/ti_armv7_keystone2.h +@@ -180,7 +180,7 @@ + "sf write ${loadaddr} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${loadaddr} 0 ${filesize}\0" \ +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \ + KERNEL_MTD_PARTS \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h +index 11dcefcc41ca..7d00afa2b10f 100644 +--- a/include/environment/ti/nand.h ++++ b/include/environment/ti/nand.h +@@ -14,7 +14,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file mode 100755 index 000000000000..49df4cd6fb10 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh @@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR} diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt new file mode 100644 index 000000000000..37081091e849 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt @@ -0,0 +1,75 @@ +i.MX8MN BSH SMM S2 +================== + +This tutorial describes how to use the predefined Buildroot +configuration for the i.MX8MN BSH SMM S2 PRO board. + +Building +-------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ??? bl31.bin + ??? ddr3* + ??? flash.bin + ??? freescale/imx8mn-bsh-smm-s2.dtb + ??? Image + ??? nand-full.lst + ??? rootfs.ext2 + ??? rootfs.ext4 -> rootfs.ext2 + ??? rootfs.tar + ??? rootfs.ubifs + ??? u-boot.bin + ??? u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing +-------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ nand erase.chip + $ reset + +Flash the built images directly to board?s memory. On your computer, +run: + + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/ + +It will flash the bootloader, the Device Tree Blob, the kernel image +and the UBI root file system. diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig new file mode 100644 index 000000000000..7f6023c64b45 --- /dev/null +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches" +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_UUU=y -- 2.32.0 From peter at korsgaard.com Sat Oct 15 15:23:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR In-Reply-To: <20221008170508.62837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:05:08 +0200") References: <20221008170508.62837-1-fontaine.fabrice@gmail.com> Message-ID: <878rlhi006.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:24:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR In-Reply-To: <20221008173619.76606-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:36:19 +0200") References: <20221008173619.76606-1-fontaine.fabrice@gmail.com> Message-ID: <874jw5hzz7.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:24:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR In-Reply-To: <20221008220716.150449-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:07:16 +0200") References: <20221008220716.150449-1-fontaine.fabrice@gmail.com> Message-ID: <87zgdxglem.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:25:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:25:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables In-Reply-To: <20221008221908.156459-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:19:08 +0200") References: <20221008221908.156459-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjpglbu.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE > identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:23:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:15 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221015152619.EEA3B86D80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=03d8b05c12642368c4b0f9241882e2c536799a06 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d95faeea442796d0f79cae2bc666824955a668fe) Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:23:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221015152620.1A0AD86D82@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=616b1d017a5347b32e421d4e76ae8a2b14877000 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 6a184841bd293fd85c5691382da13cbd2068e798) Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 0268712399..02f7602b4c 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.7.2 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sat Oct 15 15:24:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:34 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/lrzip: add CPE variables Message-ID: <20221015152620.2EA8B86D80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e468e372f997d1ba3320e7f00a95199c466123f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400) Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sat Oct 15 15:23:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:54 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221015152620.096D186D81@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=15547176843494c60abb0cbb60000cda3f52ba77 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit db5c4a06a6da5e64268667c7c07aa4154fec6919) Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 1529411355..6cd298f3b3 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sat Oct 15 15:23:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:19 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221015152740.89FD786D90@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3c6d0889d18cad3db1bf39d41a18d9c2b76d1da4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d95faeea442796d0f79cae2bc666824955a668fe) Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:23:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:50 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221015152740.953AF86D91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d2f7482db76ebd432c30cbc5f0a712aa11e2d63 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit db5c4a06a6da5e64268667c7c07aa4154fec6919) Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 1529411355..6cd298f3b3 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sat Oct 15 15:24:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:30 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/lrzip: add CPE variables Message-ID: <20221015152740.ADA3486D94@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7abdabe0efc2a8797dbc6f6db011f6977e89bfe1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400) Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sat Oct 15 15:24:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221015152740.A0E1B86D93@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=df640c3461b3dfc517ea56a08ad848b7808210e3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 6a184841bd293fd85c5691382da13cbd2068e798) Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 1d8b2a69a7..cfad6b47f8 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.5.2 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sat Oct 15 15:28:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 In-Reply-To: <20221009210613.49541-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:06:13 +0200") References: <20221009210613.49541-1-fontaine.fabrice@gmail.com> Message-ID: <87o7udgl6w.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This release contains fixes for three minor memory safety problems. > None are believed to be exploitable, but we report most memory safety > problems as potential security vulnerabilities out of caution. > * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. > Reported by Qualys > * ssh-keygen(1): double free() in error path of file hashing step in > signing/verify code; GHPR333 > * ssh-keysign(8): double-free in error path introduced in openssh-8.9 > https://www.openssh.com/txt/release-9.1 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:29:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 In-Reply-To: <20221009212341.86425-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:23:41 +0200") References: <20221009212341.86425-1-fontaine.fabrice@gmail.com> Message-ID: <87k051gl6q.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, > CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 > - Update hash of README.txt (Windows XP dropped with > https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:29:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 In-Reply-To: <20221009220250.310026-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:02:50 +0200") References: <20221009220250.310026-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfpgl5g.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This is a bug fix and enhancement release on the 3.7.x branch. > https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:30:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:46 +0200 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 In-Reply-To: <20221012204246.904703-1-leo@yuriev.ru> (=?utf-8?B?ItCb0LU=?= =?utf-8?B?0L7QvdC40LQg0K7RgNGM0LXQsg==?= (Leonid Yuriev)"'s message of "Wed, 12 Oct 2022 23:42:46 +0300") References: <20221012204246.904703-1-leo@yuriev.ru> Message-ID: <87bkqdgl3t.fsf@dell.be.48ers.dk> >>>>> "??????" == ?????? ????? (Leonid Yuriev) writes: > This is stable bugfix release of libmdbx. So it is reasonable to backport > this patch to all applicable releases/branches of Buildroot. > Release notes for v0.11.12 > -------------------------- > Fixes: > - Fixed static assertion failure on platforms where the `off_t` type is wider > than corresponding fields of `struct flock` used for file locking (backport). > Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. > - Fixed assertion check inside `page_retire_ex()` (backport). > Minors: > - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). > - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). > The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md > Signed-off-by: ?????? ????? (Leonid Yuriev) Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:32:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:32:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 In-Reply-To: <20221001212114.11912-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:21:14 +0200") References: <20221001212114.11912-1-fontaine.fabrice@gmail.com> Message-ID: <877d11gl1a.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) > - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) > - Fix serve-stale crash that could happen when > stale-answer-client-timeout was set to 0 and there was a stale CNAME > in the cache for an incoming query. (CVE-2022-3080) > - Prevent excessive resource use while processing large delegations. > (CVE-2022-2795) > https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:36:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:41 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure In-Reply-To: (Lang Daniel via buildroot's message of "Thu, 13 Oct 2022 15:03:08 +0000") References: Message-ID: <8735bpgkty.fsf@dell.be.48ers.dk> >>>>> "Lang" == Lang Daniel via buildroot writes: > configure.ac is no longer patched, autoreconfigure isn't needed. > Signed-off-by: Daniel Lang Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:28:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:41 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/vim: security bump to version 9.0.0709 Message-ID: <20221015153717.B564B86DB5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7e444acba528201d04e6532d31b633d79b6371a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit c2940513298fdb5a6e582916128e914243c784f5) Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Sat Oct 15 15:29:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:39 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/gnutls: bump to version 3.7.8 Message-ID: <20221015153717.BFB6486DB6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=180f2cdffce411a3c84888d667b514739e8fbcbd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 2acba99893cbe76926229f00e333b444a5570c6d) Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index dece16140d..0010f91fca 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Sat Oct 15 15:30:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:14 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/libmdbx: bump version to 0.11.12 Message-ID: <20221015153717.CAE3F86DB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=956de5414111988fb2ea6ade373022b5a83baca7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard (cherry picked from commit dd2ded3355c01f333c18dc16e7d9a3c496007960) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 15:31:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:31:59 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/bind: bump version to 9.16.31 Message-ID: <20221015153717.D5D4086DB9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3223b8f5c1285516f088371888ed0315e3da52ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Petr Vorel Signed-off-by: Thomas Petazzoni (cherry picked from commit 8d11c2dbb8fc1899571d6c8991b22b3ca1539c78) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 2c10a0429b..171edc8806 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.27/bind-9.16.27.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 90902aaf104c81019d75d6f8b2f7ec40fcd249406f894b44e4a9c6b5e08bf566 bind-9.16.27.tar.xz +sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index bd12f7ad31..5e8d9d5033 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.27 +BIND_VERSION = 9.16.31 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:36:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:23 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/iwd: no autoreconfigure Message-ID: <20221015153717.ECD9A86DB6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=447c0aba40120f75e001b0e0608ecdae1533ecf7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN (cherry picked from commit 1db79dffcae63dbed021143203f1908f3f7db33f) Signed-off-by: Peter Korsgaard --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 548b508edb..6814a04bf8 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From peter at korsgaard.com Sat Oct 15 15:32:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:32:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/bind: security bump to version 9.16.33 Message-ID: <20221015153717.E193486DB5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66a3f84b573a710ba9384121812f14091e01ca08 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index 5e8d9d5033..cfacf0e56b 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:29:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:31 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/gnutls: bump to version 3.7.8 Message-ID: <20221015153823.658BF86DD0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0777bd794d6dac764e5f0fe6b49dc5f6bd4850f0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 2acba99893cbe76926229f00e333b444a5570c6d) Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Sat Oct 15 15:28:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:46 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/vim: security bump to version 9.0.0709 Message-ID: <20221015153823.5A10386DCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=406d740c8a1e87eec8badbc0c60d7fac0d61ef93 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit c2940513298fdb5a6e582916128e914243c784f5) Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Sat Oct 15 15:27:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:27:52 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/openssh: security bump to version 9.1p1 Message-ID: <20221015153823.4F72586DCE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ef0daa817d93903379eb544d21704b8cffb31b60 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa) Signed-off-by: Peter Korsgaard --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) From peter at korsgaard.com Sat Oct 15 15:36:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:14 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/iwd: no autoreconfigure Message-ID: <20221015153823.878DE86DCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=444611a9a12dd81635a635a994b4718afcc3cfdd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN (cherry picked from commit 1db79dffcae63dbed021143203f1908f3f7db33f) Signed-off-by: Peter Korsgaard --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..d179e46ebf 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From peter at korsgaard.com Sat Oct 15 15:31:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:31:02 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/bind: security bump to version 9.16.33 Message-ID: <20221015153823.7A76386DD2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0b74bc5ead7844b639d383a804c6793e1dd48613 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index e5bf2be318..2f83a6276e 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:30:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:17 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/libmdbx: bump version to 0.11.12 Message-ID: <20221015153823.7040686DD1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6112142aa044cc1648ec32665ca2fafad0a84702 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard (cherry picked from commit dd2ded3355c01f333c18dc16e7d9a3c496007960) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 15:40:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:40:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 In-Reply-To: <20221014220748.14254-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:07:48 +0200") References: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Message-ID: <87y1thf63u.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-39282 and CVE-2022-39283 > https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:40:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:40:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 In-Reply-To: <20221014222051.48942-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:20:51 +0200") References: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Message-ID: <87tu45f63o.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service fixes: > Evgeny Vereshchagin discovered several ways in which an authenticated > local attacker could cause a crash (denial of service) in > dbus-daemon --system or a custom DBusServer. In uncommon configurations > these could potentially be carried out by an authenticated remote > attacker. > ? An invalid array of fixed-length elements where the length of the > array is not a multiple of the length of the element would cause an > assertion failure in debug builds or an out-of-bounds read in > production builds. This was a regression in version 1.3.0. > (dbus#413, CVE-2022-42011; Simon McVittie) > ? A syntactically invalid type signature with incorrectly nested > parentheses and curly brackets would cause an assertion failure in > debug builds. Similar messages could potentially result in a crash or > incorrect message processing in a production build, although we are > not aware of a practical example. (dbus#418, CVE-2022-42010; > Simon McVittie) > ? A message in non-native endianness with out-of-band Unix file > descriptors would cause a use-after-free and possible memory > corruption in production builds, or an assertion failure in debug > builds. This was a regression in version 1.3.0. (dbus#417, > CVE-2022-42012; Simon McVittie) > https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:39:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:39:49 +0200 Subject: [Buildroot] [git commit] package/dbus: security bump to version 1.12.24 Message-ID: <20221015154123.6A18086DE1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=29586aed965844ffb35b4d859e02f6973a67f33c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From peter at korsgaard.com Sat Oct 15 15:39:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:39:22 +0200 Subject: [Buildroot] [git commit] package/freerdp: security bump to version 2.8.1 Message-ID: <20221015154123.60B0186DE0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1e37cfd2dcc867e71519439e3cd9c630866b6140 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Sat Oct 15 15:42:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:42:50 +0200 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> (Damien Le Moal via buildroot's message of "Thu, 13 Oct 2022 16:56:46 +0900") References: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Message-ID: <87pmetf5z9.fsf@dell.be.48ers.dk> >>>>> "Damien" == Damien Le Moal via buildroot writes: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:42:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:42:39 +0200 Subject: [Buildroot] [git commit] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221015154300.63F5986DE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=959e9f7fdef4d8b602740312649016245209ce73 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal Signed-off-by: Peter Korsgaard --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y From peter at korsgaard.com Sat Oct 15 15:43:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:43:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/fluidsynth: bump to version 2.3.0 In-Reply-To: <20220926195340.583318-1-ju.o@free.fr> (Julien Olivain's message of "Mon, 26 Sep 2022 21:53:40 +0200") References: <20220926195340.583318-1-ju.o@free.fr> Message-ID: <87lephf5xq.fsf@dell.be.48ers.dk> >>>>> "Julien" == Julien Olivain writes: > For change log since v2.2.9, see: > - https://github.com/FluidSynth/fluidsynth/releases/tag/v2.3.0 > Signed-off-by: Julien Olivain > --- > Tested commit 358f4a0 with commands: > make check-package > ... > 0 warnings generated > ./utils/test-pkg -p fluidsynth > ... > 6 builds, 2 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:43:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:43:29 +0200 Subject: [Buildroot] [git commit] package/fluidsynth: bump to version 2.3.0 Message-ID: <20221015154401.79B8486DF0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9c4d4f4ac076df7e3453fb14721fdc00fb722b66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For change log since v2.2.9, see: - https://github.com/FluidSynth/fluidsynth/releases/tag/v2.3.0 Signed-off-by: Julien Olivain Signed-off-by: Peter Korsgaard --- package/fluidsynth/fluidsynth.hash | 2 +- package/fluidsynth/fluidsynth.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/fluidsynth/fluidsynth.hash b/package/fluidsynth/fluidsynth.hash index b1e9f08bbf..fdb0cf4117 100644 --- a/package/fluidsynth/fluidsynth.hash +++ b/package/fluidsynth/fluidsynth.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 bc62494ec2554fdcfc01512a2580f12fc1e1b01ce37a18b370dd7902af7a8159 fluidsynth-2.2.9.tar.gz +sha256 1df5a1afb91acf3b945b7fdb89ac0d99877622161d9b5155533da59113eaaa20 fluidsynth-2.3.0.tar.gz sha256 9b872a8a070b8ad329c4bd380fb1bf0000f564c75023ec8e1e6803f15364b9e9 LICENSE diff --git a/package/fluidsynth/fluidsynth.mk b/package/fluidsynth/fluidsynth.mk index 32fb88144e..20fbb644f5 100644 --- a/package/fluidsynth/fluidsynth.mk +++ b/package/fluidsynth/fluidsynth.mk @@ -4,7 +4,7 @@ # ################################################################################ -FLUIDSYNTH_VERSION = 2.2.9 +FLUIDSYNTH_VERSION = 2.3.0 FLUIDSYNTH_SITE = $(call github,FluidSynth,fluidsynth,v$(FLUIDSYNTH_VERSION)) FLUIDSYNTH_LICENSE = LGPL-2.1+ FLUIDSYNTH_LICENSE_FILES = LICENSE From peter at korsgaard.com Sat Oct 15 15:44:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:44:58 +0200 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git In-Reply-To: (Waldemar Brodkorb's message of "Sun, 2 Oct 2022 13:59:59 +0200") References: Message-ID: <87h705f5vp.fsf@dell.be.48ers.dk> >>>>> "Waldemar" == Waldemar Brodkorb writes: > Fixes a musl autobuild compile error, see > http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ > Signed-off-by: Waldemar Brodkorb Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:44:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:44:53 +0200 Subject: [Buildroot] [git commit] package/uclibc-ng-test: update to latest git Message-ID: <20221015154510.97D9686DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=616347a163a940f78300d980353e831a39095f3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Sat Oct 15 15:45:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:45:56 +0200 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:53 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <87czatf5u3.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:46:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:14 +0200 Subject: [Buildroot] [PATCH 2/2] package/hdparm: bump version to 9.65 In-Reply-To: <20221002143354.1909295-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:54 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> <20221002143354.1909295-2-bernd.kuhls@t-online.de> Message-ID: <878rlhf5tl.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://sourceforge.net/p/hdparm/news/ > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:45:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:45:46 +0200 Subject: [Buildroot] [git commit] package/hdparm: Fix sha256 tarball hash Message-ID: <20221015154645.4450D86E09@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=25f45d54aa0936bac685cb96bf81165d461284f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Sat Oct 15 15:46:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:05 +0200 Subject: [Buildroot] [git commit] package/hdparm: bump version to 9.65 Message-ID: <20221015154645.4E54086DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7131dee4b6d73c434b328b3b6b0e95d3f21ae956 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://sourceforge.net/p/hdparm/news/ Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 4 ++-- package/hdparm/hdparm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index b86afc7cfe..1d73585232 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ -sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz +sha1 3bc0916493f2f485c6371ec0fd16418d0e1fa636 hdparm-9.65.tar.gz # Locally computed -sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz +sha256 d14929f910d060932e717e9382425d47c2e7144235a53713d55a94f7de535a4b hdparm-9.65.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT diff --git a/package/hdparm/hdparm.mk b/package/hdparm/hdparm.mk index 2c3b372deb..3c8b77e5eb 100644 --- a/package/hdparm/hdparm.mk +++ b/package/hdparm/hdparm.mk @@ -4,7 +4,7 @@ # ################################################################################ -HDPARM_VERSION = 9.63 +HDPARM_VERSION = 9.65 HDPARM_SITE = https://downloads.sourceforge.net/project/hdparm/hdparm HDPARM_LICENSE = BSD-Style HDPARM_LICENSE_FILES = LICENSE.TXT From peter at korsgaard.com Sat Oct 15 15:47:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:47:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: bump to version 1.16.1 In-Reply-To: <20221001214156.37988-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:41:56 +0200") References: <20221001214156.37988-1-fontaine.fabrice@gmail.com> Message-ID: <874jw5f5s7.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Refresh patch > https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 > https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:46:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:53 +0200 Subject: [Buildroot] [git commit] package/libdnet: bump to version 1.16.1 Message-ID: <20221015154840.809C786E14@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c8ed72c15d39cc6c676485bff8955ac5f4258138 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Refresh patch https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdnet/0001-python-makefile.patch | 6 ++++-- package/libdnet/libdnet.hash | 2 +- package/libdnet/libdnet.mk | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/libdnet/0001-python-makefile.patch b/package/libdnet/0001-python-makefile.patch index eae22b2f14..e5526482ed 100644 --- a/package/libdnet/0001-python-makefile.patch +++ b/package/libdnet/0001-python-makefile.patch @@ -6,6 +6,8 @@ Subject: [PATCH] python makefile Signed-off-by: Peter Korsgaard [adam: refresh for 1.14; make it git-formatted] Signed-off-by: Adam Duskett +[Fabrice: updated for 1.16.1] +Signed-off-by: Fabrice Fontaine --- python/Makefile.am | 1 + 1 file changed, 1 insertion(+) @@ -15,9 +17,9 @@ index 1a74ef2..59fe0f3 100644 --- a/python/Makefile.am +++ b/python/Makefile.am @@ -11,6 +11,7 @@ $(srcdir)/dnet.c: $(srcdir)/dnet.pyx - pyrexc $(srcdir)/dnet.pyx - python-build: $(srcdir)/dnet.c + + python-build: + CC="$(CC)" LDSHARED="$(CC) -shared" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" $(PYTHON) setup.py build_ext -I$(PYINCDIR) -L$(PYLIBDIR) $(PYTHON) setup.py build touch python-build diff --git a/package/libdnet/libdnet.hash b/package/libdnet/libdnet.hash index d322a1cc29..c31ec90596 100644 --- a/package/libdnet/libdnet.hash +++ b/package/libdnet/libdnet.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 592599c54a57102a177270f3a2caabda2c2ac7768b977d7458feba97da923dfe libdnet-1.14.tar.gz +sha256 b151c4913758ef80daf4558361b4f2680a37b01d59272625bb78c77183062c63 libdnet-1.16.1.tar.gz sha256 6b46ec86e290066c47b6607d322135b3c473566e7225ac23d35a7c0588a82da6 LICENSE diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 4c58ea20a5..1e75dae323 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDNET_VERSION = 1.14 +LIBDNET_VERSION = 1.16.1 LIBDNET_SITE = $(call github,ofalk,libdnet,libdnet-$(LIBDNET_VERSION)) LIBDNET_LICENSE = BSD-3-Clause LIBDNET_LICENSE_FILES = LICENSE From peter at korsgaard.com Sat Oct 15 16:41:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:41:36 +0200 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013064931.60174-1-neal.frager@amd.com> (Neal Frager's message of "Thu, 13 Oct 2022 00:49:31 -0600") References: <20221013064931.60174-1-neal.frager@amd.com> Message-ID: <87zgdxdoov.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux in > addition to still supporting pmufw.bin binaries built > by the zynqmp-pmufw-builder. > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > Signed-off-by: Neal Frager > --- V1-> V2: > - corrected objcopy instruction for converting elf to bin V2-> V3: > - removed unnecessary spaces > - simplified if statement to check for a pmufw.elf file V3-> V4: > - added spaces around = sign of UBOOT_ZYNQMP_PMUFW_BASENAME definition Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 16:39:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:39:24 +0200 Subject: [Buildroot] [git commit] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221015164658.F1ECD81E67@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d07e6b7071cf9496aa67b2459d0574bc5ffd9c46 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..0439ec5e4b 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME = $(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) From peter at korsgaard.com Sat Oct 15 16:49:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:49:57 +0200 Subject: [Buildroot] [PATCH] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series In-Reply-To: <20221014151028.3843939-1-peter@korsgaard.com> (Peter Korsgaard's message of "Fri, 14 Oct 2022 17:10:27 +0200") References: <20221014151028.3843939-1-peter@korsgaard.com> Message-ID: <87v8oldoay.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Signed-off-by: Peter Korsgaard > --- > linux/Config.in | 2 +- > linux/linux.hash | 15 +++++++-------- > package/linux-headers/Config.in.host | 16 ++++++++-------- > 3 files changed, 16 insertions(+), 17 deletions(-) > diff --git a/linux/Config.in b/linux/Config.in > index f9caa3c652..ee59761f33 100644 > --- a/linux/Config.in > +++ b/linux/Config.in > @@ -128,7 +128,7 @@ endif > config BR2_LINUX_KERNEL_VERSION > string > - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION > + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION > default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION > default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION > default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ > diff --git a/linux/linux.hash b/linux/linux.hash > index 07963f185e..e1fd0feb44 100644 > --- a/linux/linux.hash > +++ b/linux/linux.hash > @@ -1,15 +1,14 @@ > # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc > -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz > +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz > # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc > -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz > -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz > +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz > sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz Committed after fixing the hash for 5.15.73, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 16:49:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:49:27 +0200 Subject: [Buildroot] [git commit] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221015165016.1CD1C82A98@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 17 ++++++++--------- package/linux-headers/Config.in.host | 16 ++++++++-------- 3 files changed, 17 insertions(+), 18 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index f9caa3c652..ee59761f33 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 07963f185e..c4ee15c37b 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,15 +1,14 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 7aee67de56..8679241a2c 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -392,14 +392,14 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.19.13" if BR2_KERNEL_HEADERS_5_19 - default "6.0" if BR2_KERNEL_HEADERS_6_0 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 + default "5.19.15" if BR2_KERNEL_HEADERS_5_19 + default "6.0.1" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ From james.hilliard1 at gmail.com Sat Oct 15 17:09:08 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 11:09:08 -0600 Subject: [Buildroot] [PATCH 1/1] package/brltty: fix infinite loop in configure Message-ID: <20221015170908.1494436-1-james.hilliard1@gmail.com> Revert a broken commit that introduced an infinite loop during configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard --- ...ushProgramTerminationCommand-shell-f.patch | 107 ++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch diff --git a/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch b/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch new file mode 100644 index 0000000000..f5653342e2 --- /dev/null +++ b/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch @@ -0,0 +1,107 @@ +From 941acbb1caa8a85454a491364e74fb273223b7fb Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Sat, 15 Oct 2022 10:54:57 -0600 +Subject: [PATCH] Revert "Add the pushProgramTerminationCommand shell function. + (dm)" + +Fixes infinite loop during configure: + +config.status: executing build-configure commands +configure: WARNING: libudev support not available +configure: WARNING: Human Interface Device I/O support not available on this platform +./mk4build: 104: let: not found +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF + +This reverts commit df1e070d30f583381b48fddd829bdde8efcdd16a. + +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/brltty/brltty/pull/393] +--- + brltty-prologue.sh | 48 +++++++++++++--------------------------------- + 1 file changed, 13 insertions(+), 35 deletions(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..a4fa34053 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -94,41 +94,6 @@ logDetail() { + logMessage detail "${@}" + } + +-programTerminationCommandCount=0 +- +-runProgramTerminationCommands() { +- set +e +- +- while [ "${programTerminationCommandCount}" -gt 0 ] +- do +- set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" +- +- local process="${1}" +- local directory="${2}" +- shift 2 +- +- [ "${process}" = "${$}" ] && { +- cd "${directory}" +- "${@}" +- } +- done +-} +- +-pushProgramTerminationCommand() { +- [ "${programTerminationCommandCount}" -gt 0 ] || trap runProgramTerminationCommands exit +- setVariable "programTerminationCommand$((programTerminationCommandCount += 1))" "${$} $(pwd) ${*}" +-} +- +-needTemporaryDirectory() { +- [ -n "${temporaryDirectory}" ] || { +- umask 022 +- [ -n "${TMPDIR}" -a -d "${TMPDIR}" -a -r "${TMPDIR}" -a -w "${TMPDIR}" -a -x "${TMPDIR}" ] || export TMPDIR="/tmp" +- temporaryDirectory="$(mktemp -d "${TMPDIR}/${programName}.$(date +"%Y%m%d-%H%M%S").XXXXXX")" && cd "${temporaryDirectory}" || exit "${?}" +- pushProgramTerminationCommand rm -f -r -- "${temporaryDirectory}" +- } +-} +- + resolveDirectory() { + local path="${1}" + local variable="${2}" +@@ -512,6 +477,19 @@ verifyOutputDirectory() { + fi + } + ++needTemporaryDirectory() { ++ cleanup() { ++ set +e ++ cd / ++ [ -z "${temporaryDirectory}" ] || rm -f -r -- "${temporaryDirectory}" ++ } ++ trap "cleanup" 0 ++ ++ umask 022 ++ [ -n "${TMPDIR}" -a -d "${TMPDIR}" -a -r "${TMPDIR}" -a -w "${TMPDIR}" -a -x "${TMPDIR}" ] || export TMPDIR="/tmp" ++ temporaryDirectory="$(mktemp -d "${TMPDIR}/${programName}.XXXXXX")" && cd "${temporaryDirectory}" || exit "${?}" ++} ++ + programParameterCount=0 + programParameterCountMinimum=-1 + programParameterLabelWidth=0 +-- +2.34.1 + -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 19:14:33 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 13:14:33 -0600 Subject: [Buildroot] [PATCH 1/1] package/wayland-protocols: bump to version 1.27 Message-ID: <20221015191433.1504189-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/wayland-protocols/wayland-protocols.hash | 7 +++---- package/wayland-protocols/wayland-protocols.mk | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/package/wayland-protocols/wayland-protocols.hash b/package/wayland-protocols/wayland-protocols.hash index 2d98c47c6f..4717523dc2 100644 --- a/package/wayland-protocols/wayland-protocols.hash +++ b/package/wayland-protocols/wayland-protocols.hash @@ -1,5 +1,4 @@ -# From https://lists.freedesktop.org/archives/wayland-devel/2022-July/042270.html -md5 0c6b3e037f3881650d9a53610dd235c7 wayland-protocols-1.26.tar.xz -sha1 8aeb1a629d847ec26e26d5a59c150add41e482bd wayland-protocols-1.26.tar.xz -sha256 c553384c1c68afd762fa537a2569cc9074fe7600da12d3472761e77a2ba56f13 wayland-protocols-1.26.tar.xz +# From https://lists.freedesktop.org/archives/wayland-devel/2022-October/042466.html +sha256 9046f10a425d4e2a00965a03acfb6b3fb575a56503ac72c2b86821c69653375c wayland-protocols-1.27.tar.xz +sha512 c0a49bc46c663c9f602998dfe2e184c09756790fbcc7acbc2bf9d9cf8f7d6dcdd00259b768222a30e5d134e6f97f7f4faf252947b544e8b32f53278b70da0390 wayland-protocols-1.27.tar.xz sha256 f1a2b233e8a9a71c40f4aa885be08a0842ac85bb8588703c1dd7e6e6502e3124 COPYING diff --git a/package/wayland-protocols/wayland-protocols.mk b/package/wayland-protocols/wayland-protocols.mk index 8e6d72480f..2510d7c04e 100644 --- a/package/wayland-protocols/wayland-protocols.mk +++ b/package/wayland-protocols/wayland-protocols.mk @@ -4,8 +4,8 @@ # ################################################################################ -WAYLAND_PROTOCOLS_VERSION = 1.26 -WAYLAND_PROTOCOLS_SITE = https://wayland.freedesktop.org/releases +WAYLAND_PROTOCOLS_VERSION = 1.27 +WAYLAND_PROTOCOLS_SITE = https://gitlab.freedesktop.org/wayland/wayland-protocols/-/releases/$(WAYLAND_PROTOCOLS_VERSION)/downloads WAYLAND_PROTOCOLS_SOURCE = wayland-protocols-$(WAYLAND_PROTOCOLS_VERSION).tar.xz WAYLAND_PROTOCOLS_LICENSE = MIT WAYLAND_PROTOCOLS_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 20:55:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 14:55:06 -0600 Subject: [Buildroot] [PATCH 1/1] package/weston: bump to version 11.0.0 Message-ID: <20221015205506.3903346-1-james.hilliard1@gmail.com> Drop patch which is now upstream. Drop no longer supported weston-launch. Drop no longer supported color-management-colord config option. Remove duplicate backend-headless config option. Add new libgbm requirement for renderer-gl. Add new freerdp server requirement for backend-rdp. Add support for new screenshare feature. Add support for new rdp as backend default feature. Signed-off-by: James Hilliard --- ...ncy-on-screenshooter-client-protocol.patch | 38 ------------------- package/weston/Config.in | 14 +++++++ package/weston/weston.hash | 6 +-- package/weston/weston.mk | 28 +++++--------- 4 files changed, 26 insertions(+), 60 deletions(-) delete mode 100644 package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch diff --git a/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch b/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch deleted file mode 100644 index 927215380e..0000000000 --- a/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 2ac6b6b084a877adde64db7faff2ed22eb3ea97a Mon Sep 17 00:00:00 2001 -From: Daniel Stone -Date: Tue, 8 Feb 2022 22:39:42 +0000 -Subject: [PATCH] tests: Add dependency on screenshooter client protocol - -Given that the test-helper code relies on the screenshooter protocol, -make sure it's available for us to build, and the dependency ensures we -build in order. - -Fixes: #588 - -Signed-off-by: Daniel Stone - -[Retrieved from: -https://gitlab.freedesktop.org/wayland/weston/-/commit/2ac6b6b084a877adde64db7faff2ed22eb3ea97a] -Signed-off-by: Fabrice Fontaine ---- - tests/meson.build | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/tests/meson.build b/tests/meson.build -index 2d464ddcc..222091cd1 100644 ---- a/tests/meson.build -+++ b/tests/meson.build -@@ -29,8 +29,9 @@ lib_test_client = static_library( - 'weston-test-client-helper.c', - 'weston-test-fixture-compositor.c', - weston_test_client_protocol_h, -- weston_screenshooter_protocol_c, - weston_test_protocol_c, -+ weston_screenshooter_client_protocol_h, -+ weston_screenshooter_protocol_c, - viewporter_client_protocol_h, - viewporter_protocol_c, - 'color_util.h', --- -GitLab - diff --git a/package/weston/Config.in b/package/weston/Config.in index 3b4e932b7d..20ca826324 100644 --- a/package/weston/Config.in +++ b/package/weston/Config.in @@ -42,6 +42,14 @@ config BR2_PACKAGE_WESTON_DEFAULT_HEADLESS bool "headless" select BR2_PACKAGE_WESTON_HEADLESS +config BR2_PACKAGE_WESTON_DEFAULT_RDP + bool "rdp" + depends on BR2_USE_MMU # freerdp, libglib2 + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_WCHAR # freerdp + depends on BR2_INSTALL_LIBSTDCPP # freerdp + select BR2_PACKAGE_WESTON_RDP + config BR2_PACKAGE_WESTON_DEFAULT_WAYLAND bool "wayland (nested)" select BR2_PACKAGE_WESTON_WAYLAND @@ -60,6 +68,7 @@ config BR2_PACKAGE_WESTON_DEFAULT_COMPOSITOR string default "drm" if BR2_PACKAGE_WESTON_DEFAULT_DRM default "headless" if BR2_PACKAGE_WESTON_DEFAULT_HEADLESS + default "rdp" if BR2_PACKAGE_WESTON_DEFAULT_RDP default "wayland" if BR2_PACKAGE_WESTON_DEFAULT_WAYLAND default "x11" if BR2_PACKAGE_WESTON_DEFAULT_X11 @@ -74,6 +83,7 @@ config BR2_PACKAGE_WESTON_RDP depends on BR2_USE_WCHAR # freerdp depends on BR2_INSTALL_LIBSTDCPP # freerdp select BR2_PACKAGE_FREERDP + select BR2_PACKAGE_FREERDP_SERVER help This enables the RDP backend, which allows accessing weston through the network with any RDP-compliant client. @@ -143,6 +153,10 @@ config BR2_PACKAGE_WESTON_SHELL_KIOSK default y select BR2_PACKAGE_WESTON_HAS_SHELL +config BR2_PACKAGE_WESTON_SCREENSHARE + bool "screenshare" + default y + config BR2_PACKAGE_WESTON_DEMO_CLIENTS bool "demo clients" depends on BR2_USE_MMU # pango diff --git a/package/weston/weston.hash b/package/weston/weston.hash index d58ca1ef70..88061c2bca 100644 --- a/package/weston/weston.hash +++ b/package/weston/weston.hash @@ -1,4 +1,4 @@ -# From https://lists.freedesktop.org/archives/wayland-devel/2022-June/042260.html -sha256 8a9e52506a865a7410981b04f8341b89b84106db8531ab1f9fdd37b5dc034115 weston-10.0.1.tar.xz -sha512 688d843096a95b463161b98e85ca3443b31ba2ee49fc8d456a2780cc96f576e9d097054e9f361997a66e9cc8373cf29e406a742dae3884b3b50b26acf1710c8c weston-10.0.1.tar.xz +# From https://lists.freedesktop.org/archives/wayland-devel/2022-September/042410.html +sha256 a6138d4dc9554560ac304312df456019f4be025ec79130f05fb5f2e41c091e1d weston-11.0.0.tar.xz +sha512 71554dc870e9c6832fdfb8f0e8dbcd7ad01c3827041c2f7fe4b7679df33b242fd00e7f0c8728d1aeecc648f8296a9d3fc502a66c91ec662f03086d9a28aab3ea weston-11.0.0.tar.xz sha256 fdb65868f65d0fbdb05c2d3b779e10ce9969fa0c4b9262ba4f260e87086ab860 COPYING diff --git a/package/weston/weston.mk b/package/weston/weston.mk index 5e71473640..59b977721a 100644 --- a/package/weston/weston.mk +++ b/package/weston/weston.mk @@ -4,7 +4,7 @@ # ################################################################################ -WESTON_VERSION = 10.0.1 +WESTON_VERSION = 11.0.0 WESTON_SITE = https://gitlab.freedesktop.org/wayland/weston/-/releases/$(WESTON_VERSION)/downloads WESTON_SOURCE = weston-$(WESTON_VERSION).tar.xz WESTON_LICENSE = MIT @@ -16,8 +16,6 @@ WESTON_DEPENDENCIES = host-pkgconf wayland wayland-protocols \ libxkbcommon pixman libpng udev cairo libinput libdrm WESTON_CONF_OPTS = \ - -Dbackend-headless=false \ - -Dcolor-management-colord=false \ -Ddoc=false \ -Dremoting=false \ -Dtools=calibrator,debug,info,terminal,touch-calibrator @@ -57,23 +55,9 @@ else WESTON_CONF_OPTS += -Dimage-webp=false endif -# weston-launch must be u+s root in order to work properly -ifeq ($(BR2_PACKAGE_LINUX_PAM),y) -define WESTON_PERMISSIONS - /usr/bin/weston-launch f 4755 0 0 - - - - - -endef -define WESTON_USERS - - - weston-launch -1 - - - - Weston launcher group -endef -WESTON_CONF_OPTS += -Ddeprecated-weston-launch=true -WESTON_DEPENDENCIES += linux-pam -else -WESTON_CONF_OPTS += -Ddeprecated-weston-launch=false -endif - -ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGLES),yy) +ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGBM)$(BR2_PACKAGE_HAS_LIBGLES),yyy) WESTON_CONF_OPTS += -Drenderer-gl=true -WESTON_DEPENDENCIES += libegl libgles +WESTON_DEPENDENCIES += libegl libgbm libgles ifeq ($(BR2_PACKAGE_PIPEWIRE)$(BR2_PACKAGE_WESTON_DRM),yy) WESTON_CONF_OPTS += -Dpipewire=true WESTON_DEPENDENCIES += pipewire @@ -180,6 +164,12 @@ else WESTON_CONF_OPTS += -Dshell-kiosk=false endif +ifeq ($(BR2_PACKAGE_WESTON_SCREENSHARE),y) +WESTON_CONF_OPTS += -Dscreenshare=true +else +WESTON_CONF_OPTS += -Dscreenshare=false +endif + ifeq ($(BR2_PACKAGE_WESTON_DEMO_CLIENTS),y) WESTON_CONF_OPTS += -Ddemo-clients=true WESTON_DEPENDENCIES += pango -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 21:09:40 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 15:09:40 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/brltty: fix infinite loop in configure Message-ID: <20221015210940.4002212-1-james.hilliard1@gmail.com> Backport a patch to fix an infinite loop bug in configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard --- Changes v1 -> v2: - backport patch instead of revert --- ...unProgramTerminationCommands-used-a-.patch | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch new file mode 100644 index 0000000000..0f81254e08 --- /dev/null +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch @@ -0,0 +1,29 @@ +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 +From: Dave Mielke +Date: Sat, 15 Oct 2022 15:20:38 -0400 +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash + command. (dm) + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] +--- + brltty-prologue.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..6d1faf983 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { + while [ "${programTerminationCommandCount}" -gt 0 ] + do + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) + + local process="${1}" + local directory="${2}" +-- +2.34.1 + -- 2.34.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:09 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) Message-ID: Hello All! This small four-patch series touches on the delicate intricacies of the systemd package and how we integrate it in Buildroot, especially with regard to read-only filesystems. The underlying issue is that systemd wants a writable /var filesystem (it will store a bunch of things at runtime in there). A lot of packages also expect a writable /var. After all, var stands for variadic, so it is not supposed to be set in stone and read-only. The solution we implemented in Buildroot is to generate a factory for /var, and register that as tmpfiles, at build time, and mount a tmpfs on the then-empty /var at runtime, so that systemd-tmpfiles populates /var on boot. Having a tmpfs means /var is repopulated from a clean state at each boot, and people who want a persistent /var have to provide their own mechanism to mount their actual filesystem instead. However, for some people, this does not seem to work as expected, so we introduced a call to systemd-tmpfiles at build time, to pre-populate the rootfs from all the tmpfiles, of which our var factory, at build time. These two mechanism clash with each others, and are mostly incompatible, and causes files to be duplicated. To solve the issue, this series introduces new options, so the user can elect to use either, none, or both mechanisms, as they see fit. The first steps are borrowed from Yann at work, where we make it easier to change the location where /var is nounted from, by making it a systemd mount unit, rather than use the legacy fstab, and move the factory to /usr/share as it is a system factory (/etc is for the administartor to provide overrides). Note that those two are not strictly required for the following, but since that makes it easier to change the /var filesystem in a systemd-compliant manner, they are a nice addition to the series. Then we move together the two mechanisms under the auspices of a common package, to make it easier to later make them conditional. Finally, we introduce those two new options, that drive each mechanism. Eventally, we want to highlight that, by default, the behaviour has not changed, since the two new options default to y, so as to explicitly keep the behaviour from nefore this patchset. Regards, Yann E. MORIN. ---------------------------------------------------------------- Yann E. MORIN (4): package/skeleton-systemd: move /var factory out of /etc package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs package/skeleton-systemd: host the tmpfiles preparation script system: add options for var factory and tmpfiles pre-seed .../fakeroot_tmpfiles.sh | 0 .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- package/skeleton-init-systemd/var.mount | 18 ++++++++++ package/systemd/systemd.mk | 6 ---- system/Config.in | 38 +++++++++++++++++++++- 5 files changed, 69 insertions(+), 11 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) create mode 100644 package/skeleton-init-systemd/var.mount -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 15 21:23:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/skeleton-systemd: move /var factory out of /etc In-Reply-To: References: Message-ID: <642fc3070362553483dd284d81df6949b3d7a682.1665868987.git.yann.morin.1998@free.fr> From: "Yann E. MORIN" When the rootfs is not remounted read-write (thus assuming a read-only rootfs like squashfs), we create a tmpfiles.d factory for /var. However, we register those in /etc/tmpfiles.d/, but /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we move our var factory to /usr/lib/tmpfiles.d/, which is also the location where systemd itself places its own tmpfiles, and where we already put all our other tmpfiles (see audit, avahi, cryptsetup, dhcp, lighttpd, nfs-utils, quagga, samba4, swupdate) and our handling of systemd's catalog files too. We also rename the file to a better name, so that it is obvious it is generated by us (systemd already installs a var.conf of its own, so we want to avoid name clashing). Last little detail: there is no need or reason to create .../tmpfiles.d/ at install time; it is only needed in the rootfs-pre-cmd hook, so we only create it just before we need it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only moves out of /etc and into /usr/lib - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- package/skeleton-init-systemd/skeleton-init-systemd.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 795a171809..7b66732ef4 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -29,7 +29,6 @@ else # a real (but empty) directory, and the "factory files" will be copied # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW - mkdir -p $(TARGET_DIR)/etc/systemd/tmpfiles.d echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef @@ -38,6 +37,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var + mkdir -p $(TARGET_DIR)/usr/lib/tmpfiles.d for i in $(TARGET_DIR)/usr/share/factory/var/* \ $(TARGET_DIR)/usr/share/factory/var/lib/* \ $(TARGET_DIR)/usr/share/factory/var/lib/systemd/*; do \ @@ -51,7 +51,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR printf "C! %s - - - -\n" "$${j}" \ || exit 1; \ fi; \ - done >$(TARGET_DIR)/etc/tmpfiles.d/var-factory.conf + done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:10 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:10 +0200 Subject: [Buildroot] [PATCH 2/4] package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs In-Reply-To: References: Message-ID: <116d929d3e556155552784dd7792afad72cd3125.1665868987.git.yann.morin.1998@free.fr> To mount our /var tmpfs when the rootfs is mounted read-only (really, not remounted reqd-write), we use an entry in fstab. However, /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we register /var as a systemd mount unit, so that we can also have the /var factory populated and functional even when /etc is empty. The var.mount unit is heavily modelled after systemd's own tmp.mount one, so we carry the same license for that file (in case that may apply). We add an explicit reverse dependency to systemd-tmpfiles-setup.service, to ensure /var is mounted before we try to populate it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only handles converting /var mounting into a systemd unit - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- .../skeleton-init-systemd.mk | 3 ++- package/skeleton-init-systemd/var.mount | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 package/skeleton-init-systemd/var.mount diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 7b66732ef4..970951d553 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -30,7 +30,6 @@ else # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab - echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR @@ -52,6 +51,8 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/var.mount new file mode 100644 index 0000000000..6b165dff6d --- /dev/null +++ b/package/skeleton-init-systemd/var.mount @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: LGPL-2.1-or-later +# Modelled after systemd's tmp.mount + +[Unit] +Description=Buildroot /var tmpfs +DefaultDependencies=no +Conflicts=umount.target +Before=basic.target local-fs.target umount.target systemd-tmpfiles-setup.service +After=swap.target + +[Mount] +What=tmpfs +Where=/var +Type=tmpfs +Options=mode=1777,strictatime,nosuid,nodev,size=50%%,nr_inodes=1m + +[Install] +WantedBy=basic.target -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/skeleton-systemd: host the tmpfiles preparation script In-Reply-To: References: Message-ID: <16a20e2a0d976faf2aee7ab8ebb6cfe0e9d8422d.1665868987.git.yann.morin.1998@free.fr> Commit 0d9b84b7a83f (package/systemd: invoke systemd-tmpfilesd on final image) forcefully introduced a call to systemd-tmpfiles as a per-rootfs hook, on the premise that would help with read-only rootfs. However, that did not account for the then-pre-existing handling of /var as a factory when the user opted not to remount / read-write (by not setting BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW). This means that, for users who want to use a factory for /var, the generated filesystem contains the factory files twice: once as stored in the factory, and once as populated by systemd-tmpefilesd. In the hope to reconcile the two solutions, we move the handling of calling systemd-tmpfilesd to the skeleton-init-systemd package, where we already handle the /var factory. Having the two in the same package will make it easier, in the future, to provide the user with a choice whether to use one of the other. Note that it is very important to keep the order of the hooks as they are. Indeed, skeleton-init-systemd sorts before systemd, so its hooks were registered before systemd's hooks; now that we move the CREATE_TMPFILES hook, we must ensure it is called after the PRE_ROOTFS_VAR one, so that the behaviour of acting on the var factory remains. As a final note: we chose the move this way, rather than move the var factory into the systemd package, because it is more related to the system integration on the Buildroot side, rather than the integration of the systemd package in Buildroot. Similarly, the other four rootfs hooks, SYSTEMD_LOCALE_PURGE_CATALOGS, SYSTEMD_UPDATE_CATALOGS, SYSTEMD_RM_CATALOG_UPDATE_SERVICE, and specially SYSTEMD_PRESET_ALL, should also be moved out of the systemd package, because they too are more related to the Buildroot system, rather than to the systemd package itself; but the frontier is very porous is either way, for such a package as special as systemd. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh | 0 package/skeleton-init-systemd/skeleton-init-systemd.mk | 6 ++++++ package/systemd/systemd.mk | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) diff --git a/package/systemd/fakeroot_tmpfiles.sh b/package/skeleton-init-systemd/fakeroot_tmpfiles.sh similarity index 100% rename from package/systemd/fakeroot_tmpfiles.sh rename to package/skeleton-init-systemd/fakeroot_tmpfiles.sh diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 970951d553..89a28d1780 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -58,6 +58,12 @@ SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_V endif +define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ + $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home mkdir -p $(TARGET_DIR)/srv diff --git a/package/systemd/systemd.mk b/package/systemd/systemd.mk index 1d7452de19..e4a8114221 100644 --- a/package/systemd/systemd.mk +++ b/package/systemd/systemd.mk @@ -739,12 +739,6 @@ define SYSTEMD_RM_CATALOG_UPDATE_SERVICE endef SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_RM_CATALOG_UPDATE_SERVICE -define SYSTEMD_CREATE_TMPFILES_HOOK - HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ - $(SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) -endef -SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK - define SYSTEMD_PRESET_ALL $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all endef -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:12 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:12 +0200 Subject: [Buildroot] [PATCH 4/4] system: add options for var factory and tmpfiles pre-seed In-Reply-To: References: Message-ID: <94bc8ca32665535f3e99f3e30c8e78f243df1695.1665868987.git.yann.morin.1998@free.fr> Currently, when one does not enable remounting the rootfs read-write, i.e. keep it read-only, for example because the filesystem is actualyl read-only by design, like squashfs, then two things happen: - we create a factory from the content of /var at build time, register tmpfiles entries for it, and mount a tmpfs on /var at runtime, so that systemd-tmpfiles does populate /var from the factory; this is only done when the rootfs is not remounted r/w; - we trigger systemd-tmpfiles at build time, which uses the tmpfiles db, of which our /var entries, to pre-populate the filesystem; this is always done, whether the rootfs is remounted r/w or not. Note that Buildroot mounts a tmpfs on /var, and leaves to the integrator to care for providing an actual filesystem, as there are too many variants and is very specific to each use-case. These two mechanisms are conflicting, semantically, bit also technically: the files from the factory will be duplicated, but that may help in some situations when the actual /var filesystem is not mountable. In some cases, it might be preferable to have none, either, or both mechanisms enabled; it highly depends on the ultimate integration scheme chosen for a device. For example, some people will be very happy with a /var that is actually on a tmpfs and that it gets reseeded form scratch at every boot, while others may want to ensure that their system continue to work even when they can't mount something that makes /var writable. YMMV, as they used to say back in the day... So, we introduce two new options, in the system sub-menu, each to drive each mechanism. We default those options to y, to keep the previous behaviour by default, except the var factory is only available when the rootfs is not remounted r/w, as it were so far. We still hint in the help text that there might be some conflict between the two mechanisms, bt since it has been that way for some time, it does not look too broken for most people. Since that introduces more options related to systemd being chosen as an init system, we gather those two options and the existing one inside a if-endif block, rather than adding more 'depends on' on each options. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../skeleton-init-systemd.mk | 7 +++- system/Config.in | 38 ++++++++++++++++++- 2 files changed, 42 insertions(+), 3 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 89a28d1780..69991265a5 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -32,6 +32,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab endef +ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var @@ -55,14 +56,16 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +endif # BR2_INIT_SYSTEMD_VAR_FACTORY +endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW -endif - +ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK +endif # BR2_INIT_SYSTEMD_POPULATE_TMPFILES define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home diff --git a/system/Config.in b/system/Config.in index 888c24ce81..84c1b048cd 100644 --- a/system/Config.in +++ b/system/Config.in @@ -154,10 +154,44 @@ source "$BR2_BASE_DIR/.br2-external.in.init" endchoice +if BR2_INIT_SYSTEMD + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs on /var" + default y # legacy + depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Build a factory of the content of /var as installed by + packages, mount a tmpfs on /var at runtime, so that + systemd-tmpfiles can populate it from the factory. + + This may help on a read-only rootfs. + + It probably does not play very well with triggering a call + to systemd-tmpfiles at build time (below). + + Note: Buildroot mounts a tmpfs on /var to at least make the + system bootable out of the box; mounting a filesystem from + actual storage is left to the integration, as it is too + specific and may need preparatory work like partitionning a + device and/or formatting a filesystem first, so that falls + out of the scope of Buildroot. + +config BR2_INIT_SYSTEMD_POPULATE_TMPFILES + bool "trigger systemd-tmpfiles during build" + default y # legacy + help + Act on the systemd-tmpfiles.d database at build time, when + assembling the root filesystems. + + This may help on a read-only filesystem. + + It probably does not play very well with the /var factory + (above). + config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET string "The default unit systemd starts at bootup" default "multi-user.target" - depends on BR2_INIT_SYSTEMD help Specify the name of the unit configuration file to be started at bootup by systemd. Should end in ".target". @@ -165,6 +199,8 @@ config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET https://www.freedesktop.org/software/systemd/man/systemd.special.html#default.target +endif # BR2_INIT_SYSTEMD + choice prompt "/dev management" if !BR2_INIT_SYSTEMD default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:27:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:27:46 +0200 Subject: [Buildroot] [PATCH] package/skeleton-systemd: systemd-ify /var on a read-only rootfs In-Reply-To: <30214_1656937450_62C2DBEA_30214_425_1_ebc1b4a9ba79f014485eb6c21d96956d9ebc3f5d.1656937448.git.yann.morin@orange.com> References: <30214_1656937450_62C2DBEA_30214_425_1_ebc1b4a9ba79f014485eb6c21d96956d9ebc3f5d.1656937448.git.yann.morin@orange.com> Message-ID: <20221015212746.GA3666@scaer> Yann, All, On 2022-07-04 14:24 +0200, yann.morin at orange.com spake thusly: > From: "Yann E. MORIN" [--SNIP--] > Even though we could have split the two changes in two patches, one for > moving the tmpfiles unit away from /etc, and one for adding a systemd > mount unit, the two really make sense together as part of having an > empty /etc, so we made that a single change. Yet, you should have known it would been a bit more easier to review the two as separate changes, so this is eaxactly what I did in that series: https://lore.kernel.org/buildroot/cover.1665868987.git.yann.morin.1998 at free.fr/T/#mea2407e6384ddf35d618c720ed9c6bf8462fcfd2 Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sat Oct 15 21:58:29 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 23:58:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/igd2-for-linux: bump to version 2.2 Message-ID: <20221015215829.116064-1-fontaine.fabrice@gmail.com> This bump will fix the build with pupnp >= 1.14.13 raised since commit a9ee25b01b741ad4f68575974c89c65146ab87f2 and https://github.com/pupnp/pupnp/commit/2f99af26731ec7d5677e5576c006a35128b59d55: In file included from src/threadutil/FreeList.h:43, from src/threadutil/TimerThread.h:39, from src/gatedevice.h:32, from src/gatedevice.c:38: src/threadutil/ithread.h:917:12: error: expected ';' before 'int' 917 | EXPORT_SPEC int pthread_mutexattr_setkind_np( | ^~~~ | ; Fixes: - http://autobuild.buildroot.org/results/2eebf8264327bd492ee8cadc0c539d42c4f2e252 Signed-off-by: Fabrice Fontaine --- package/igd2-for-linux/igd2-for-linux.hash | 2 +- package/igd2-for-linux/igd2-for-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igd2-for-linux/igd2-for-linux.hash b/package/igd2-for-linux/igd2-for-linux.hash index fe1272338a..3b4fd4f5c9 100644 --- a/package/igd2-for-linux/igd2-for-linux.hash +++ b/package/igd2-for-linux/igd2-for-linux.hash @@ -1,4 +1,4 @@ # Locally computed: -sha256 843f2b0a7597e6cc7af85da099a7cce3401a334cbb4a6ae9d38ce252311db9b9 igd2-for-linux-2.1.tar.gz +sha256 68ee10bf02b18890af8bf9e38be377f038627cd16fce54200fc1b26fd83e4375 igd2-for-linux-2.2.tar.gz sha256 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994 linuxigd2/doc/LICENSE sha256 c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3 linuxigd2/src/threadutil/COPYING diff --git a/package/igd2-for-linux/igd2-for-linux.mk b/package/igd2-for-linux/igd2-for-linux.mk index 8cc3c6ae18..c646c6bf92 100644 --- a/package/igd2-for-linux/igd2-for-linux.mk +++ b/package/igd2-for-linux/igd2-for-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGD2_FOR_LINUX_VERSION = 2.1 +IGD2_FOR_LINUX_VERSION = 2.2 IGD2_FOR_LINUX_SITE = \ $(call github,Orange-OpenSource,igd2-for-linux,v$(IGD2_FOR_LINUX_VERSION)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:09:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:09:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: needs host-pkgconf Message-ID: <20221015220913.151173-1-fontaine.fabrice@gmail.com> host-pkgconf is needed since bump to version 1.16.1 in commit c8ed72c15d39cc6c676485bff8955ac5f4258138 and https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' Fixes: - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e Signed-off-by: Fabrice Fontaine --- package/libdnet/libdnet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 1e75dae323..dc56b892b4 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -14,6 +14,7 @@ LIBDNET_CONF_OPTS = \ --with-gnu-ld \ --with-check=no LIBDNET_CONFIG_SCRIPTS = dnet-config +LIBDNET_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_LIBDNET_PYTHON),y) LIBDNET_DEPENDENCIES += host-python-cython python3 -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:14:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:14:28 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221015005813.4055238-1-james.hilliard1@gmail.com> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: Hi James, Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > The bearssl package is not compatible with parallel builds. > bearssl was building perfectly fine up until now and it seems there are a lot of packages that are affected by parallel build issues (e.g. dmraid, musepack, slang, etc). Did we change something recently on the autobuilders? > > Fixes: > - > http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > Signed-off-by: James Hilliard > --- > package/bearssl/bearssl.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > index ff5f4e87b7..c2a5760af5 100644 > --- a/package/bearssl/bearssl.mk > +++ b/package/bearssl/bearssl.mk > @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > endif > > define BEARSSL_BUILD_CMDS > - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > $(BEARSSL_TARGETS) > endef > > -- > 2.34.1 > > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 15 22:24:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:24:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: security bump to version 0.651 Message-ID: <20221015222420.165934-1-fontaine.fabrice@gmail.com> Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine --- package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..55f28e3212 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,8 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:26:05 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:26:05 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/lrzip: security bump to version 0.651 Message-ID: <20221015222605.171104-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. - Use official tarball and so drop autoreconf https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Drop autoreconf package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..0375696414 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,9 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) -LRZIP_AUTORECONF = YES +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING LRZIP_CPE_ID_VENDOR = long_range_zip_project -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:34:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:34:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 Message-ID: <20221015223439.202348-1-fontaine.fabrice@gmail.com> - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:23 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:23 -0600 Subject: [Buildroot] [PATCH 01/12] package/gstreamer1: bump to version 1.20.4 Message-ID: <20221015230534.4016536-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gstreamer1/gstreamer1.hash | 4 ++-- package/gstreamer1/gstreamer1/gstreamer1.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1/gstreamer1.hash b/package/gstreamer1/gstreamer1/gstreamer1.hash index 5daadfae74..5fb52606fe 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.hash +++ b/package/gstreamer1/gstreamer1/gstreamer1.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.3.tar.xz.sha256sum -sha256 607daf64bbbd5fb18af9d17e21c0d22c4d702fffe83b23cb22d1b1af2ca23a2a gstreamer-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.4.tar.xz.sha256sum +sha256 67c1edf8c3c339cda5dde85f4f7b953bb9607c2d13ae970e2491c5c4c055ef5f gstreamer-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gstreamer1/gstreamer1.mk b/package/gstreamer1/gstreamer1/gstreamer1.mk index 89d5f93d43..16c016b145 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.mk +++ b/package/gstreamer1/gstreamer1/gstreamer1.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_VERSION = 1.20.3 +GSTREAMER1_VERSION = 1.20.4 GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz GSTREAMER1_SITE = https://gstreamer.freedesktop.org/src/gstreamer GSTREAMER1_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:24 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:24 -0600 Subject: [Buildroot] [PATCH 02/12] package/gst1-plugins-base: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash | 4 ++-- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash index 105708f1da..5c729d832f 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.3.tar.xz.sha256sum -sha256 7e30b3dd81a70380ff7554f998471d6996ff76bbe6fc5447096f851e24473c9f gst-plugins-base-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.4.tar.xz.sha256sum +sha256 8d181b7abe4caf23ee9f9ec5b4d3e232640452464e39495bfffb6d776fc97225 gst-plugins-base-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk index c244a0c621..d225cdf910 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BASE_VERSION = 1.20.3 +GST1_PLUGINS_BASE_VERSION = 1.20.4 GST1_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST1_PLUGINS_BASE_VERSION).tar.xz GST1_PLUGINS_BASE_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-base GST1_PLUGINS_BASE_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:25 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:25 -0600 Subject: [Buildroot] [PATCH 03/12] package/gst1-plugins-good: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-3-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash | 4 ++-- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash index 81da41388f..b30c512878 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.3.tar.xz.sha256sum -sha256 f8f3c206bf5cdabc00953920b47b3575af0ef15e9f871c0b6966f6d0aa5868b7 gst-plugins-good-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.4.tar.xz.sha256sum +sha256 b16130fbe632fa8547c2147a0ef575b0140fb521065c5cb121c72ddbd23b64da gst-plugins-good-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk index de7dcb985d..cc7bab5824 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_GOOD_VERSION = 1.20.3 +GST1_PLUGINS_GOOD_VERSION = 1.20.4 GST1_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST1_PLUGINS_GOOD_VERSION).tar.xz GST1_PLUGINS_GOOD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-good GST1_PLUGINS_GOOD_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:26 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:26 -0600 Subject: [Buildroot] [PATCH 04/12] package/gst1-plugins-bad: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-4-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash | 4 ++-- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash index 5a413cd350..c8789a707d 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.3.tar.xz.sha256sum -sha256 7a11c13b55dd1d2386dd902219e41cbfcdda8e1e0aa3e738186c95074b35da4f gst-plugins-bad-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.4.tar.xz.sha256sum +sha256 a1a3f53b3604d9a04fdd0bf9a1a616c3d2dab5320489e9ecee1178e81e33a16a gst-plugins-bad-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk index 57974d723a..14710a2501 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BAD_VERSION = 1.20.3 +GST1_PLUGINS_BAD_VERSION = 1.20.4 GST1_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST1_PLUGINS_BAD_VERSION).tar.xz GST1_PLUGINS_BAD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-bad GST1_PLUGINS_BAD_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:27 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:27 -0600 Subject: [Buildroot] [PATCH 05/12] package/gst1-plugins-ugly: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-5-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash | 4 ++-- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash index ffd060f465..4ec29e6894 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.3.tar.xz.sha256sum -sha256 8caa20789a09c304b49cf563d33cca9421b1875b84fcc187e4a385fa01d6aefd gst-plugins-ugly-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.4.tar.xz.sha256sum +sha256 5c9ec6bab96517e438b3f9bae0ceb84d3436f3da9bbe180cf4d28e32a7251b59 gst-plugins-ugly-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk index 131163e20a..20382719c3 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_UGLY_VERSION = 1.20.3 +GST1_PLUGINS_UGLY_VERSION = 1.20.4 GST1_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST1_PLUGINS_UGLY_VERSION).tar.xz GST1_PLUGINS_UGLY_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-ugly GST1_PLUGINS_UGLY_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:28 -0600 Subject: [Buildroot] [PATCH 06/12] package/gst1-devtools: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-6-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-devtools/gst1-devtools.hash | 4 ++-- package/gstreamer1/gst1-devtools/gst1-devtools.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.hash b/package/gstreamer1/gst1-devtools/gst1-devtools.hash index bed13db295..fc504a2c12 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.hash +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.3.tar.xz.sha256sum -sha256 bbbd45ead703367ea8f4be9b3c082d7b62bef47b240a39083f27844e28758c47 gst-devtools-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.4.tar.xz.sha256sum +sha256 82a293600273f4dd3eed567aae510ca0c7d629c3807788b00e6cdbd1d2459a84 gst-devtools-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 validate/COPYING diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.mk b/package/gstreamer1/gst1-devtools/gst1-devtools.mk index 14f665a408..fbb04c92ef 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.mk +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_DEVTOOLS_VERSION = 1.20.3 +GST1_DEVTOOLS_VERSION = 1.20.4 GST1_DEVTOOLS_SOURCE = gst-devtools-$(GST1_DEVTOOLS_VERSION).tar.xz GST1_DEVTOOLS_SITE = https://gstreamer.freedesktop.org/src/gst-devtools GST1_DEVTOOLS_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:29 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:29 -0600 Subject: [Buildroot] [PATCH 07/12] package/gst1-libav: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-7-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-libav/gst1-libav.hash | 4 ++-- package/gstreamer1/gst1-libav/gst1-libav.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-libav/gst1-libav.hash b/package/gstreamer1/gst1-libav/gst1-libav.hash index 1b86e82b93..78f5b5bb07 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.hash +++ b/package/gstreamer1/gst1-libav/gst1-libav.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.3.tar.xz.sha256sum -sha256 3fedd10560fcdfaa1b6462cbf79a38c4e7b57d7f390359393fc0cef6dbf27dfe gst-libav-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.4.tar.xz.sha256sum +sha256 04ccbdd58fb31dd94098da599209834a0e7661638c5703381dd0a862c56fc532 gst-libav-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-libav/gst1-libav.mk b/package/gstreamer1/gst1-libav/gst1-libav.mk index 80545fdd4c..a867af5147 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.mk +++ b/package/gstreamer1/gst1-libav/gst1-libav.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_LIBAV_VERSION = 1.20.3 +GST1_LIBAV_VERSION = 1.20.4 GST1_LIBAV_SOURCE = gst-libav-$(GST1_LIBAV_VERSION).tar.xz GST1_LIBAV_SITE = https://gstreamer.freedesktop.org/src/gst-libav GST1_LIBAV_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:30 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:30 -0600 Subject: [Buildroot] [PATCH 08/12] package/gst1-vaapi: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-8-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-vaapi/gst1-vaapi.hash | 4 ++-- package/gstreamer1/gst1-vaapi/gst1-vaapi.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash index fce687774a..5baaa4dfb7 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.3.tar.xz.sha256sum -sha256 6ee99eb316abdde9ad37002915bd8c3867918f6fdc74b7cf2ac4c1ae0d690b45 gstreamer-vaapi-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.4.tar.xz.sha256sum +sha256 ab12596144c05506e9782374c5d2cdfb3069fca89908d6de360d947bb77fd06a gstreamer-vaapi-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LIB diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk index 8b137c37ec..bd6c16be3e 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_VAAPI_VERSION = 1.20.3 +GST1_VAAPI_VERSION = 1.20.4 GST1_VAAPI_SITE = https://gstreamer.freedesktop.org/src/gstreamer-vaapi GST1_VAAPI_SOURCE = gstreamer-vaapi-$(GST1_VAAPI_VERSION).tar.xz GST1_VAAPI_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:31 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:31 -0600 Subject: [Buildroot] [PATCH 09/12] package/gst1-rtsp-server: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-9-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash | 4 ++-- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash index 13dcb764d8..b6a31f8796 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash @@ -1,4 +1,4 @@ -# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.3.tar.xz.sha256sum -sha256 ee402718be9b127f0e5e66ca4c1b4f42e4926ec93ba307b7ccca5dc6cc9794ca gst-rtsp-server-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.4.tar.xz.sha256sum +sha256 88d9ef634e59aeb8cc183ad5ae444557c5a88dd49d833b9072bc6e1fae6a3d7d gst-rtsp-server-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING.LIB diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk index 02cf9e5eb1..0b18c1fcf8 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_RTSP_SERVER_VERSION = 1.20.3 +GST1_RTSP_SERVER_VERSION = 1.20.4 GST1_RTSP_SERVER_SOURCE = gst-rtsp-server-$(GST1_RTSP_SERVER_VERSION).tar.xz GST1_RTSP_SERVER_SITE = http://gstreamer.freedesktop.org/src/gst-rtsp-server GST1_RTSP_SERVER_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:32 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:32 -0600 Subject: [Buildroot] [PATCH 10/12] package/gstreamer1-editing-services: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-10-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- .../gstreamer1-editing-services.hash | 4 ++-- .../gstreamer1-editing-services.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash index 18dd1a79b3..308596d7cd 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash @@ -1,5 +1,5 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.3.tar.xz.sha256sum -sha256 5fd896de69fbe24421eb6b0ff8d2f8b4c3cba3f3025ceacd302172f39a8abaa2 gst-editing-services-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.4.tar.xz.sha256sum +sha256 aa03e983af5d79c1befffe3575b034e60960619a96bf877447cb73c28016fc41 gst-editing-services-1.20.4.tar.xz # Hashes for license files: sha256 f445dc78b88496f7e20c7a2a461b95baba5865c8919b8289ac24ac0a80c6ce7a COPYING diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk index 417aaf2a45..77feb15991 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.3 +GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.4 GSTREAMER1_EDITING_SERVICES_SOURCE = gst-editing-services-$(GSTREAMER1_EDITING_SERVICES_VERSION).tar.xz GSTREAMER1_EDITING_SERVICES_SITE = https://gstreamer.freedesktop.org/src/gstreamer-editing-services GSTREAMER1_EDITING_SERVICES_LICENSE = LGPL-2.0+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:33 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:33 -0600 Subject: [Buildroot] [PATCH 11/12] package/gst-omx: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-11-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst-omx/gst-omx.hash | 4 ++-- package/gstreamer1/gst-omx/gst-omx.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst-omx/gst-omx.hash b/package/gstreamer1/gst-omx/gst-omx.hash index 8abf4a27e8..140ad626f7 100644 --- a/package/gstreamer1/gst-omx/gst-omx.hash +++ b/package/gstreamer1/gst-omx/gst-omx.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.3.tar.xz.sha256sum -sha256 8db48040bb41f09edf8d17ff6d16c54888d7777ba4501c2c69f0083350ea9a15 gst-omx-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.4.tar.xz.sha256sum +sha256 70ddd485e2dcab79070164d61ad2ff3a63e15a1d7abf9075d86eb77762b0edfd gst-omx-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst-omx/gst-omx.mk b/package/gstreamer1/gst-omx/gst-omx.mk index 085bff87ad..d644c44995 100644 --- a/package/gstreamer1/gst-omx/gst-omx.mk +++ b/package/gstreamer1/gst-omx/gst-omx.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST_OMX_VERSION = 1.20.3 +GST_OMX_VERSION = 1.20.4 GST_OMX_SOURCE = gst-omx-$(GST_OMX_VERSION).tar.xz GST_OMX_SITE = https://gstreamer.freedesktop.org/src/gst-omx -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:34 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:34 -0600 Subject: [Buildroot] [PATCH 12/12] package/gst1-python: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-12-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-python/gst1-python.hash | 4 ++-- package/gstreamer1/gst1-python/gst1-python.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-python/gst1-python.hash b/package/gstreamer1/gst1-python/gst1-python.hash index 9501d94a97..adb116ac4c 100644 --- a/package/gstreamer1/gst1-python/gst1-python.hash +++ b/package/gstreamer1/gst1-python/gst1-python.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.3.tar.xz.sha256sum -sha256 db348120eae955b8cc4de3560a7ea06e36d6e1ddbaa99a7ad96b59846601cfdc gst-python-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.4.tar.xz.sha256sum +sha256 5eb4136d03e2a495f4499c8b2e6d9d3e7b5e73c5a8b8acf9213d57bc6a7bd3c1 gst-python-1.20.4.tar.xz sha256 ea3ad127610e5ded2210b3a86a46314f2b3b28e438eccffdae19a4d6fbcdb0c2 COPYING diff --git a/package/gstreamer1/gst1-python/gst1-python.mk b/package/gstreamer1/gst1-python/gst1-python.mk index 0fa1f661b8..feb2de718a 100644 --- a/package/gstreamer1/gst1-python/gst1-python.mk +++ b/package/gstreamer1/gst1-python/gst1-python.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PYTHON_VERSION = 1.20.3 +GST1_PYTHON_VERSION = 1.20.4 GST1_PYTHON_SOURCE = gst-python-$(GST1_PYTHON_VERSION).tar.xz GST1_PYTHON_SITE = https://gstreamer.freedesktop.org/src/gst-python GST1_PYTHON_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:21:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 19:21:15 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine wrote: > > Hi James, > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : >> >> The bearssl package is not compatible with parallel builds. > > > bearssl was building perfectly fine up until now and it seems there are a lot of packages that are affected by parallel build issues (e.g. dmraid, musepack, slang, etc). Some parallel build bugs don't reproduce reliably due to timing, I made a change to my autobuilders which massively increases the chance of triggering build failures in packages which have dependency graph bugs. This triggers build build failures in -j1 builds which would otherwise only appear when running parallel builds(my autobuilders are generally running with -j1 to make the logs more readable). > Did we change something recently on the autobuilders? Yes, all my autobuilders were recently changed to use make master(will be make version 4.4 once released) with top level --shuffle=random. Details: https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 https://trofi.github.io/posts/238-new-make-shuffle-mode.html http://trofi.github.io/posts/249-an-update-on-make-shuffle.html Note that MAKE1 is currently broken itself without this when using shuffle mode: https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > >> >> >> Fixes: >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 >> >> Signed-off-by: James Hilliard >> --- >> package/bearssl/bearssl.mk | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk >> index ff5f4e87b7..c2a5760af5 100644 >> --- a/package/bearssl/bearssl.mk >> +++ b/package/bearssl/bearssl.mk >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib >> endif >> >> define BEARSSL_BUILD_CMDS >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ >> $(BEARSSL_TARGETS) >> endef >> >> -- >> 2.34.1 >> > Best Regards, > > Fabrice From judge.packham at gmail.com Sun Oct 16 02:20:51 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 16 Oct 2022 15:20:51 +1300 Subject: [Buildroot] [PATCH v2] package/syslog-ng: Bump version to 3.38.1 Message-ID: <20221016022051.3870975-1-judge.packham@gmail.com> Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham --- Notes: Changes in v2: - update version in syslog-ng.conf ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- package/syslog-ng/syslog-ng.conf | 2 +- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 4 files changed, 4 insertions(+), 89 deletions(-) delete mode 100644 package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.conf b/package/syslog-ng/syslog-ng.conf index 45b94facf9..69db9b4b78 100644 --- a/package/syslog-ng/syslog-ng.conf +++ b/package/syslog-ng/syslog-ng.conf @@ -1,4 +1,4 @@ - at version: 3.37 + at version: 3.38 source s_sys { file("/proc/kmsg" program_override("kernel")); diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt -- 2.38.0 From me at linux.beauty Sun Oct 16 04:08:44 2022 From: me at linux.beauty (Li Chen) Date: Sun, 16 Oct 2022 12:08:44 +0800 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod In-Reply-To: <20221012224008.5dc7c7b6@windsurf> References: <87edvdeseo.wl-me@linux.beauty> <20221012224008.5dc7c7b6@windsurf> Message-ID: <183defad72f.103c9b752645508.6184936701214911726@linux.beauty> Hi Thomas, ---- On Thu, 13 Oct 2022 04:40:08 +0800 Thomas Petazzoni wrote --- > Hello, > > On Wed, 12 Oct 2022 09:34:39 +0800 > Li Chenme at linux.beauty> wrote: > > > Content-Transfer-Encoding: 8bit > > > > kmod install path is always /usr/bin/kmod instead > > of /bin/kmod. > > > > So if we link modprobe/lsmod/... to /bin/kmod > > > > We will get error like: > > > # modprobe > > > -sh: modprobe: not found > > > > because it points to: > > > # ls -liah /sbin/modprobe > > > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod > > > > and kmod is under /usr/bin/kmod instead of /bin/kmod. > > > > Signed-off-by: Li Chen me at linux.beauty> > > Are you testing a BR2_ROOTFS_MERGED_USR enabled or a > BR2_ROOTFS_MERGED_USR disabled configuration? > > If you're testing a BR2_ROOTFS_MERGED_USR enabled configuration, then > the "modprobe" symlink, even if created in /sbin is in fact in > /usr/sbin, because /sbin is a symlink to /usr/sbin. So actually the > symlink is /usr/sbin/modprobe -> ../bin/kmod, which is correct as kmod > is indeed in /usr/bin/kmod. > > If you're testing a BR2_ROOTFS_MERGED_USR disabled configuration, then > the "modprobe" symlink is really in /sbin, and /sbin/modprobe is a > symlink to ../usr/bin/kmod, which is correct. > > (Of course, I didn't do a test, so maybe my reasoning is wrong, but the > current logic appears correct at first sight). Thanks for your reply, I cannot reproduce this issue now somehow. I will update this thread if I come across it again someday. Regards, Li From joel at jms.id.au Sun Oct 16 04:50:06 2022 From: joel at jms.id.au (Joel Stanley) Date: Sun, 16 Oct 2022 04:50:06 +0000 Subject: [Buildroot] [PATCH] package/coremark: Set cflags In-Reply-To: References: <20220913072303.1698887-1-joel@jms.id.au> Message-ID: On Fri, 16 Sept 2022 at 05:03, Chris Packham wrote: > > On Tue, Sep 13, 2022 at 7:23 PM Joel Stanley wrote: > > > > The coremark build needs to set PORT_CFLAGS explicitly in order to pick > > up the configured optmisation level, and other flags. > > > > Signed-off-by: Joel Stanley > > Acked-by: Chris Packham ping > > > --- > > package/coremark/coremark.mk | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/package/coremark/coremark.mk b/package/coremark/coremark.mk > > index 418fd5c8d39b..9ea8693e7189 100644 > > --- a/package/coremark/coremark.mk > > +++ b/package/coremark/coremark.mk > > @@ -11,6 +11,7 @@ COREMARK_LICENSE_FILES = LICENSE.md > > > > define COREMARK_BUILD_CMDS > > $(TARGET_MAKE_ENV) $(MAKE) CC="$(TARGET_CC)" -C $(@D) \ > > + PORT_CFLAGS="$(TARGET_CFLAGS)" \ > > PORT_DIR=linux$(if $(BR2_ARCH_IS_64),64) EXE= link > > endef > > > > -- > > 2.35.1 > > From thomas.petazzoni at bootlin.com Sun Oct 16 05:38:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 16 Oct 2022 05:38:20 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-15 Message-ID: <20221016053828.119BB41601@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-15 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 7 | 4 | 0 | 11 | 2022.08.x | 14 | 9 | 0 | 23 | master | 126 | 588 | 4 | 718 | Classification of failures by reason for master ----------------------------------------------- ca-certificates-20211016 | 32 bearssl-0.6 | 30 berkeleydb-5.3.28 | 30 host-gcc-initial-11.3.0 | 29 systemd-250.4 | 25 xz-5.2.7 | 24 coremark-pro-1.1.2743 | 21 host-gcc-final-11.3.0 | 19 glibc-2.36-44-g2628500f5dff... | 18 gpm-1.20.7 | 16 libnss-3.84 | 15 sysvinit-2.99 | 15 crun-1.5 | 13 host-f2fs-tools-1.15.0 | 12 slang-2.3.2 | 12 host-go-1.19.1 | 11 linux-6.0 | 11 autofs-5.1.8 | 10 host-binutils-2.38 | 10 host-sentry-cli-1.59.0 | 10 dieharder-3.31.1 | 9 igd2-for-linux-2.1 | 8 package/openssh/openssh.mk:... | 8 libglib2-2.72.3 | 7 ocf-linux-20171122 | 7 efivar-38 | 6 host-gcc-initial-10.4.0 | 6 musepack-r475 | 5 brltty | 4 btrfs-progs-5.16.2 | 4 dash-0.5.11.5 | 4 dmraid-1.0.0.rc16-3 | 4 fbset-2.1 | 4 frotz-2.54 | 4 gerbera-1.10.0 | 4 host-berkeleydb-5.3.28 | 4 host-pahole-73383b3a39afe86... | 4 libee-0.4.1 | 4 unknown | 4 duma-2.5.15 | 3 gobject-introspection-1.72.0 | 3 hdparm-9.63 | 3 host-binutils-2.37 | 3 host-binutils-2.39 | 3 host-protobuf-c-1.4.1 | 3 libgcrypt-1.10.1 | 3 nanocom-1.0 | 3 procps-ng-3.3.17 | 3 tstools-08f6be304040e7b8476... | 3 elfutils-0.186 | 2 freeradius-server-3.2.0 | 2 gensio-2.5.5 | 2 host-riscv-isa-sim-1.1.0 | 2 libarchive-3.6.1 | 2 libsvgtiny-ea9d99fc8b231c22... | 2 linux-5.10.145-cip17 | 2 linux-5.10.145-cip17-rt7 | 2 linux-pam-1.5.2 | 2 mimic-1.1.0 | 2 mongodb-4.2.18 | 2 netsurf-3.10 | 2 ntp-4.2.8p15 | 2 open62541-v1.3.3 | 2 openssh-legal-info | 2 openswan-3.0.0 | 2 perl-5.34.1 | 2 portaudio-190700_20210406 | 2 sdl-1.2.15 | 2 toolchain-external-codescap... | 2 vde2-2.3.2 | 2 wavemon-0.9.4 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.5 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 check-0.15.2 | 1 dahdi-linux-5c840cf43838e06... | 1 f2fs-tools-1.15.0 | 1 fftw-quad-3.3.8 | 1 file-5.41 | 1 fontconfig-2.13.1 | 1 freeipmi-1.6.10 | 1 freeradius-client-1.1.7 | 1 frr-8.3.1 | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 gauche-0.9.12 | 1 gmrender-resurrect-0.1 | 1 heirloom-mailx-12.5 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-12.2.0 | 1 host-gdb-11.2 | 1 host-gdb-arc-2020.09-releas... | 1 host-moby-buildkit-0.10.0 | 1 host-rust-1.64.0 | 1 host-vde2-2.3.2 | 1 jhead-3.06.0.1 | 1 lcdproc-0.5.9 | 1 libcap-ng-0.8.3 | 1 libcurl-7.84.0 | 1 libdnet-1.16.1 | 1 libopenssl-1.1.1q | 1 libxml2-2.10.2 | 1 lxc-4.0.12 | 1 openal-1.22.0 | 1 openpgm-5-3-128 | 1 openvmtools-11.3.5-18557794 | 1 quickjs-2021-03-27 | 1 reaver-1.6.6 | 1 refpolicy-2.20220106 | 1 tcf-agent-1.7.0 | 1 tiff-4.4.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 wolfssl-5.5.1 | 1 xvisor-0.3.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/78e5c6b9d42790e6184bb471fa1e4a892631574b | nios2 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/1dd3cf6031ca6737ccfc2bdbe8fb66a79d858764 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/afc7e0e5c47a9c5578903812f9a81a02db5cfdf0 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/8ab7968bf61156fdfca4838df9a832b6df30b3bc | ORPH arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/09efd495b2577dd423b0090c04c6ce53aa198550 | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/b55bf719c2a55e92a4ae7d6f559858579e1d34da | arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/23b32d7669b0dd83ad632034bc27003246d23163 | ORPH arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6b58cb73a392e8b9bfb89e416776ab8a09c0c07d | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3c762ca824d41f6ddbd91332e9cc6bb967e72bba | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/eef5e85ef0981ddc1f71a8901b37195011c87dcc | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e0c7d6d50f1627666fce8958b411db7ba0637a2b | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e5f79f5939c7f0f05ee6d03e9fd2b6fe45e38609 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/bd23a70abccd6bd71f047a963ba4475a784afc28 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/926660edf31425cd7e8155a0321a083fc50f2280 | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ffe774ed0133dc3bb1df9fa79ec28593f5326ed6 | armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/0e8445ed3d46beddde5b25b7c2aa9217a8fd683e | sh4 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2f71f2e79a72a2d630b123d5cfafa6d3a03d1a03 | mipsel | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/30c2294b496bb91a1f2bebd9720fd0df7780b0be | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/63e1b29c5b17b82c1deef95eb8a747eb77ce70df | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/068409ef889eae1e52b0566f6fa2d7a0a0f01d9a | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0ef5aeaf18dced230c6a3895aa3d074daabcc1a5 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/93e4d14330745ceb1f54f9ede5d3d6a2678b0db5 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2f221edec5b16e0615e9cd48962d1d395ff8ba1d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0603a942ad1187582464d68b0fafb56eca749aa8 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7ff9898a7d5082bac85631e39acc9c87bc800f05 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/178fea79449624c283727d3976d2b15e14189f87 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8f54df01ac78ab9e33470252f2c39ff0d5e4c6d1 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e33875d7c519b9dc2d2121cf0c7612e4eb4b158d | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/74a9e6c2fd5a0898b57afbf9334392e098dc079a | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/83489d54300ed6be277298f1b2c900ea4e518d0b | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c9c7dc9c4973065307a318df9751f4681682c1d8 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ec976cf62d9c49385b8e9eba9c61a1b25f691c17 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/84abc46cd1abfedfc4016dd5d11beb36a00fa864 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5449099214ac680e61e6a9ec5107b20b511fa60a | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d9da269bcd1a5553235bec81a7239f26de1853ce | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f6ac71759aa3eff78846f62fe02128ecad46a6f0 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7d9b195b36cf8697ae73011c201dc956fca38e6c | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d212dd048bf266dbba9f92bde7b5db46e04a1747 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/645fdfa563379c64a88b2de9ba28983dd9deb7c2 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bb6751f24236c47a019854a9c0178693600f20c2 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ca420d17f61e80b2be38b40232ffa15ed1a9b912 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8e2d08162bac46eb6ed577233717d0bb12c42b0e | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8b3381c4128efc13a7adf16ad906bed561e0dc6e | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f6c02050b1f7627ec8f17a693442872146091f4 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2c51052fbaa2d5135a1e05177b9691f909585d01 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/80cad60b5a6440fbe8b67a07268e2731e3dffb1b | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c913e2f8fea075a13342d3db22ab82f5d488ed4b | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a3ea6d0800d2f298ce00a4b3889315e9819ea49d | sh4aeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/46e28a38c0d409c04b2fa97f03c87741821358dd | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/90911dfdada2f9cdcedfe590647c2729dfb9e1cc | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3fbf52f1dd3972b1c5590f6f55738bc4823fc080 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/590d2f1ab4e42be14a45ee6d8b28571ab13b3779 | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5a71b119c375a181ff540b6c3b8ba78a8c642354 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/db2eeaf26265721ab743ae3df172215fd31c70d6 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bf181685c40005a63d1784ed6b4a24cee01dac90 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/757d609444d8e513320aa0258ac689bcf8722f4d | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ddbc84120414c01796f774d8b8b8094e1e3c7b35 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/16c0070af89964cfa0157523e4f3a1244bd942e8 | ORPH riscv64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cf444d8d732593f4d3e968c610b900422bf96e76 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3ca4efe71d8a1446d2907dee7c52b81ff34a743a | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/778adc699f78cc97721909e08874ce7ac89dc661 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/82d7ae5b32b96caf7f0473e694107117bb7c5d0e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/24296610d584088e656f5c802e82726d73114335 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3ceab8bfc2a11462175137af9b2418b32abf9b7f | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0167835d718a8e976f182abd345f9b9134117fae | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d698c62776f9d3f89a9779aeb0e534d359e80150 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ba45e27c8b1828d504563e307f7bffabe58bbc4c | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0aa5f338b963f5608b3d5f7efaf893a0e1bf960f | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/00052a9592b3ba89b27328d84fb54bcdf7e62164 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a9c4781f974205a17a2e49340014cd03fffff1ae | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3f2892fddfe72db77dbf7c678f33ac4e89227588 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/603e90f860bf732764fa69b28fdb8c0fc2418b79 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/86143582c1f11ae5e5f9c3a338bef5fd8412c377 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/072244a06f468bda666551755026ade06e8f3622 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a79b9abe877137eba32c3cdd030a982017cb4d25 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d459e85cda0ba4139839a56139578a84d52cc73e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ce15c48adf23abeed846351941ac457e4e4f2197 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/442d558f09c49309be37e18fe627e64994bb710b | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/cbae8dd7cd12cda767ced93fb158c16745484ae1 | sparc | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/38bf76e4618047f310e208f4372b92a05eb3d6f7 | ORPH arc | brltty | TIM | http://autobuild.buildroot.net/results/59e36093f7e437a5a37037f7fa50ce2443c47fd3 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/06c9414a1ecbc1a147bc8dfddced03fc659af694 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/82af705f7ca282495461cb3994f5a7e6f64273e1 | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/59ab880f8c3474a3cfe765205787e0e83cb0f03f | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/bed253d3b198fa6a9aa86467662d4b1093f69db5 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5d9f5469ec1db831c6797f8289178750f1eb4d10 | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/54ab55ec099d80f9a646dd13b61b9982ca03b73f | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/7286047c3aeedd7e7f44f30fded6f46b59c28c10 | ORPH microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/19208bf56df573a1506a634aef1215ded926c06d | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/563464518c5a6df7d912078b3c7118898570d4c8 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bebae5bf40cf95710ed1d91b9104f67aa121d3ab | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97bb3ff45d54770a885a2eb2a3997b1eea857de7 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fa21f3f19623e15e784f6c01447e66ab2a488353 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/77f5b78eb111d935ae35bafa4e36b5424cb2992d | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b378af0b6fda6e2937e742169394fd1fb4884f75 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ac594c757bb6233775c19addeb00a3bd959ea89d | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d16b333563474828d253830e2a873103a19ccab0 | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f7c0b1b98c33e91cc5ff43e42b33cf63a777bcab | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d8b1e6156c43813fed9f6fb833d174aee77fd199 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c3998478fee13a1a41cd15ebcd7e6e534de63572 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9417220aaa2123c7f81a57109af2317ecfa9a59e | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e4955db53ca59e5ae84fbf38c3d30e6ad568bb55 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f5f9d622641c65d381ac5dc4cb2fa8c2129ab4bb | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3a21b1f2b7a82b7badef1cbee8314354ded75d5d | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c835ae6a6b050da353d40f528c880e9c544f5e7e | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/572c91e52639d20395ead73abadd80c196bb82e4 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/132665ee26a9e94f9b9c95a130d9a9183231a75e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/286f5948c19def197919026ae9a5e7b1c50b85e3 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/17178648f1571ecd779f67a4a2e25bef103b729d | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/128c5e769dd76371d00cd3baad3278b2929a4587 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1bc83af821b80cb6074aea74047f098ed0a88e4f | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/50ca2c7fa6e8b20bde584750311b928b5ad59233 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f3da84d29bebe843c89834ba4f992e693e9dc15b | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/70a984f08145e90ad5aec9c8d01e81fc5a1a641e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/185247fbe882649dbfd2d4e2f080ad395e087718 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ec19cec6d404628c99ba25f70d709324e1cbb0ed | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/004e912d57a16df3ed3a46e01731cbf6f13b0093 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4cb46ebb8cf3818fc05926b75d7569a772f6bb1a | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/49c2421c7cdd43ca62b38fa58bf12af2d0d832b6 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6baf9ef738633cc20af4e850781875df003c8ee8 | riscv32 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/a0aca02432b01acb88ab924724a60fba3bba4a07 | ORPH sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bf5d9d56ffa7ecf6f3af7b8a5441d4138059efc7 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e520c59f39c9bb847bb179ac8bc16f699cdc8036 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0a10a078af47b8e48458e9cf2627c37bb1501baf | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/53a4c6c8202fb43f0f1908370a05895ef26c5424 | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1a3e2cbcfedf1a74e087cac36ca438cba045da5e | mipsel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bd32f578319d7a1319545a27e3eaaab3f302b39b | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ed2887c90ec0b20aae6f4633cd5eac1e5b99cfe0 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0da2526c9e476fd0e91435345e1f51320d509f42 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/697f3ed518e985f0ea02e80a4aa0461f642055c8 | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8d3dc215c8c501614109e13bd6c9f2bc022810f4 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1ead1f59417b599f76d4ccbee2134a57ea22c272 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/940cbfd7af03b66e927b5cccce2fccedf5810a54 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/95085a7d8d794fdfceafb77ae9ad55f374584d2b | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/29834403e4132d9d219438772aa886b5867b292e | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fe887b4b9bda0afd49953409a42cf1be7d79865f | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c971d4f9de029ecfd5659c71d840185dc86d3f47 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7fbbb42063bcfa1610276820f274a27a74e77d4b | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7fc70bdbaea6bf7872c0572c905372f71fff73ce | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/35bcae6f1dbafd48b80123536ff175e74147daf5 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/589b74f70162f4d8ce1c1eb8428403863d5fc60d | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9f2299a313378593888cb790ec4c46a9e5f5b2c3 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f2dff27f5a7b6f30986395d9e44f3701d311f214 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9bfc19943fc46ba6e0e00181c198cb0055596c21 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5274b83dd13870190926cd3c967bada1ae69f09c | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ebff03eaef78613d377e49f0c5399efd62d7ad22 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/abcd4302483709b7f40214c516807dd153952d0c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aca662d7eebc4ea4861f64b54202285e2a62c30a | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d996fdb506f815c0fb5cfc010589e56eb68df215 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2b2014fdbdca9f6792db144bf819d38b0052adc0 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2ef99748525be63a572f1ad468cdb409e195b880 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/25f230eb2ba0ec383d0b2101f99611dcb1808925 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/74c2f4dec127d245263ce748feced5db79c9fa4d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8c5cbbb5c609687cb1ad7c67ec1fc1fca0fcf65d | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ae3d36b65eb79be5187910ec81c5ed007f18a6c0 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e82ffc0f35ed3e3e5ded16fbb9d9c1066b7b7932 | nios2 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8296612503f0f929e39c567d70a078bc058aef98 | ORPH microblazeel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/352e5f98eeae63f936a87a8a0da67309920edb39 | ORPH aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e03490d7bf8a346d4f9093875c94a5b8729863be | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/3370bf13eb13fc696fa1d99b684384dfa0f31459 | ORPH mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0f9309f5f703306e5573891028501ffe1d334953 | mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5fecde1d02216a2302d9e0f632bdd80caeb50fb1 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/1617f29dbcdbc454002c90500d3bc888ecea26c7 | or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7b154103320a6679c85e74c7c0233719d1107e24 | mips64el | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d2fd4772fc996b0fb761090eca1a20afb9abc762 | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a3c80d00cfb24017fe6649f874ce2c0f01067627 | mips64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3706e11f1e7183ef428c0b3472cad1aa8d2270d9 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5f1be17ae48d3dab39bc2ed2b6b7eb34a1fb7ebb | mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a0b69b5a7b76f61a02463309bf264b104cc78227 | nios2 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/4ab2bf58fba6f9ba32be81b1ac8d26ad9eb33092 | ORPH mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/2b6a29f15be8566efeeb3b53e4b0710aad17b535 | ORPH sparc64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/202a9fec3bb4d69e149a064e86b26730063b3656 | ORPH powerpc64le | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/80f594831240f6a22d2ca13f0b8a7819fc2116fd | ORPH sh4aeb | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/759f5e0bed3f4724422398b70335955251be43e5 | ORPH mips | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/87faa5a09d6312ee64bbd94cc1f6f0713a8a453d | ORPH microblaze | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/a16e78f93bf2bfa11a41f397942de613769eabff | ORPH arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/797b12ec99147efc89f5f9d3fb59d936a5716370 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/2730af17b6e49ed8e3834697115792f7483f19a9 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/8a02c5ce5186b6ede7cda3ed61930b096046dde0 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/020077023334692a3589930f27d080f7becf386d | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/48ca9534fcf07ae2e05689a4888f8b5b8780ced9 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/c7cbbf39eb4de5ac67aa6d847e9317c10c8d07a2 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/613abc1571c89c86ed18fb1c54134447c2284d60 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/eb8974c208bf7402cd008e5f180dd250877cd379 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/421dcc9da8c0fe5d9a88d27ec81c6e1b39fd1daf | powerpc64le | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5bbec969edacfcdb9cf2dbfaf063bf89797f8360 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/bc9139c497d2dec281a3d6abb1dc3681469a6bbb | ORPH x86_64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/531e3e00192b782c8f8957bf863bf012598f9571 | ORPH mips | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/75114d76d260114b88b1d12ea32883b2bd133896 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/537cef486e9f8e6880c5f61e645d4ee6f64cd10c | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/76c788e6177b4a70bfd54a094903806c44948f99 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/399c8f192e2fab672625c9e26e4818f780b6331f | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/91350d1be1db52b832544413da240c7ee74bafb1 | riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/7ee7e33c8580c9c45cc90e657ac00e85d98c50cb | sparc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0b45c42dc998492bb8d2efedd747c88624642eee | sh4a | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b65e89597303185021673d174b00ac28e3c99ab7 | mips | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d05f9d9af6570d9c4aeda993d9a067eeab83e567 | microblazeel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/7b27c31ff298055c85a717b2c9daabfcb17b7868 | m68k | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/06653ef4cf8f83fdd7cdfbaa2ff05b09975b87ed | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6335f232656af01582ce60537e54c220a973a77c | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/f8809667bb1762685a7d244fc170b2d317d1280d | arc | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/82415f025bfe3af6de0d7765275611f4192d841b | mips64 | gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/91a05522442792f0ffbc676084c59710cb344590 | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/54fe829c281a6c93ab7ce069458019eba96a97bc | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d370110cfa5a77b9671ed21a39d345258aea0e1e | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/2c1fd7de926b9fec0d783c959bfe7e23b1205eda | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d1398abc85174f0cb609d7e651b9d5a41617193f | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/688a13a7bf628168f5437bd582b74caacff8842e | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ce3df1c4a8b28d9c7f1a51980a8666f73042ed29 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c007889f11c4fde45c624ee8afcfcda23e8f58f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c90b79ed301b8977124462e942d6f93200c4273 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b22c3846d6d5929e34bf8a336739dddf6d2cff68 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6abd82fd747efe7b107bee30d86bd1e53c4d53ac | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3b1a190376fe9bf5733d60c4052931891695e0c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55d83f253b54248cd86bce101fa6bdb8e633ff56 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4d94f8c71e89e068563d7efdcad4eb0f50eeca1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8d843d3fc8b75bbb6eaad1fce935997ac22991 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/015cf6357d621af1d266d58870bed58a6527f8c4 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cf7b738e537c92c3d6d74c73672d9a9cde170ed | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc8f67b9f5533633f841473db471fce033bf27c8 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2ef0acb598537285a2d4e8b018eb92c60109d90 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76bcc3d7644185c4ab2f2480d78c9954e1389ce8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e21787e85f430a4f27e973aa8168db78219c4cc8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/610d1e0f9a63ca93fdad4b7698bb3d2d20729ca9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da087bb72c749950b4450e7cebb5b270167ca7fe | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbfd89462cbf3c3e98c9cf8caac42396cc4aa2b5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c69b46ce7dbdf7c1339c58f39e46b047cda0054 | nios2 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/8abf87e06166767db9650ce101d4ae01804faef1 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/37b48eed11191805fb0860b0534a55cca73c621d | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/b2889696cea9962a933a1122d23a4ab2b4beb415 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1e4a55cedbe399d388ac82793a2d97be04fed540 | ORPH s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9b0181b70d98bee7befc310b6b6b50d41e27a383 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9a8fe328e4d4ffae00ba43b796956b243c273942 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/de486e6d20c48d0bbfcc4bbf68a0e6a4860cdfd8 | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0568f6d22a10cc95e5aef21cbba46b7f73b52c2c | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ade6a67df692aa4b2583f410d70d4e6c6f3ed113 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/08a52595fbc668acd2596b668d27e1eeb019c1a9 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/db7dc919c3c2caf65c1f1b29f6f311413b513df0 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/64f4ce11c905bebd815e1a98eb792d576b440a34 | sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/314a46834235a7a7e77847510b0a4f73c41f3c60 | armeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ee64267b4e179dcc042f91a36410e47810cd05d4 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/11381004064d809a303a2c869b371d330dbdc14e | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/cb710ef7dad654ff18854e4b960d83785377a22c | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ab19ec2e051ab4cc1de8bb10bde545cd56dd4d8e | sh4aeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c5b99ad98f9797ecbf9bb3fa26227c7b0352f0db | or1k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2abe63ef2f9bab5fffe77b5d6579540f64818930 | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/3f53d4b3f04eec5f844b52c0d4395d506608c848 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b04848888ad264241f6fe4d440820783a5eaae45 | aarch64_be | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b147c786ec35947b4f5ffdf5d7f4a0614bc2589c | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/68c1a17ed436a9e0fdffa130677a622e9259b979 | sh4aeb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/4f2afbb9fb7a532aab327d9109e7c9d0c1f73ab0 | armeb | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7d264d104dfe085ee928726dcd98c502cc825089 | ORPH powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e55119bfe427e35ee093f7836a4f1b40e3c2136e | ORPH nios2 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b94e28c50edf9b46c47387a56f361cd1984701d4 | ORPH microblaze | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c1c819f7c00b759e0394b0430c0fb5a9a50968aa | ORPH arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/0edab6a5d32ec9ae427f48cd0fc83a9fbc9a6bc7 | x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8b28120e3c53b2170125434bb4acfd47f5b8074f | sh4aeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7211aa4bf56ffd7a4ef8ec4f726b1d021e00fe31 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ecba04a1bb7d0fce799d868fcbfb46ad0b95b6c7 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6f71690e97e3006c743f0519c2d353a89d68bfb8 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e0254558e91cf9d693fb1b107de88eb5f8d0d458 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8cea6f16017dde0ee7501c32a6f3072c13646398 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/39c1caec4df1aa3c005b05d5d035a34be2990c78 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e97e61cb73b03da14ff08166e27437669a75a62e | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b24bd663cab7c2c14b95edef20f92dd4bdccaabb | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2e584e8e5a4c640f32a8549906dea84a8ae24de7 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f1ef96ae66ac583083cde885901a75dd66255b28 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/979eb3bd538076c717630c877f90ccdceeaa9530 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/4811cabbe31c11ce87f676bd0a9dddd674c203f8 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/0d9446e12ee4d9b24fcd8a408cd313bc076d9deb | nios2 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/68d901755c92d1936d04183875569c8c64bc9d95 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7fd7c5a42f9a31430af9d91ad121cb3abc1d8734 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68ca56c72d18e9dbc0d61a90af1a525a353a920d | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3d0cab0d2b785cf3a3e455f400bf8f3860eb40a | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f22ed6476d8c380a38d03e833f965b51c0b8107c | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e27e4caf78111ffb6c80af9b02fea2c3bd36d0a3 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dde86f0b503558054a50f900d54dffc2ed9ac628 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bb6765deb7c128abd07d5f25471132f6b95ef10c | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1d081977dc48b85147fae629cf8fc1b14c5ea16a | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9c4ef67bae024ec33798fc288cbfb2e4bae215f | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8558ead1f8d6cb8658f10695bf50c6edab8776ef | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b89554090a78ba207d14580f52addf36130e3df9 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ba2c1a6a4db7417caab14a599d9a8adcd811f7e3 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/d1578c5ff400e597faed6d092357fc25ce503e29 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/93946c4ec0de12574f69afa143bba32b5cec2335 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d7e1436dbcc54c18a802697b5722939f66d4c2f1 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eb1c49f96000838802ba02096240acdd63615cb4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0c3d47a936b49153c0afd91abfbc69c5d963dbd9 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cc2de22d7a36b510cba0c30439306727fa50d086 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f2e31585c9c1a75b60f3f62ffd98f89c6ee7372c | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a618505e2967afab0fec7c3d8ce3d600ad87a636 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/96f62ed375163e65e3ce396dee0e62436fe59339 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d9df79239f4affbc1ac99e426bc2f404deb1a235 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaaf1d508ffaca02820596cd15d8ef86bd1318cd | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/314e8d81e4eb6b5f99975e9dc5266afe0fda9ba4 | armeb | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a80325d27492d4cf0c6fcded80dac7ec7f84c1c | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f079c83087481787acce80b953179fc9ae60e064 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/90928cc9fe43e665cfa4d8acd5ff68549d85dd59 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/78c103b8ba1085e90fc48526cea4383151f75024 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae8b8a9422deb6b1cd167267c2854d01124c8f6b | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cf929ba91fc9330111201d0150d1140e7c14bab8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b962555bc949275718222db4f4c4aa5e0bc26ec | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/8ae4b1e53207dd9287a91423a64be40431616946 | armeb | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b6ed4c5e765cff88dbf2cc174c455e0aed285fca | i486 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d6868e37bde13e4571acee1a6856fb059583276a | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/775049bece0056908161192773f6d5277f3afae3 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/526c5dc463cbf84c9f6d9868c195e11ebd90d13e | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/915ae90691b9df8caf25fc02862f754498d760ac | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8e70e0a35ae5c8bc78ec1d0905ffe30093cde907 | mipsel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/84d6e965d749a2a472e600a6e6041f250df24aaf | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/23e0cd08237883181e4b71cfd0ff4c50462b6117 | mipsel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/365c466ac58c6701cad3b2cc7dea2df521e8c9db | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77ccbcf82eff8cfc23fead1b03fef12ca231451c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e2fa9a8c3e9dfc760dc8421b820a5dc02796454d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4c98e2d31379a3735085988426ac655816d89abd | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/182f00bf74b381dffe44b3273ac82ddce2a44e63 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bbc807e7f87e36ca1acce5f9f6073aa4d72a90b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/02f3c125095941672acdfa8e04cf8e49efaf2cef | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/70db99f0d2f2cff4539aa1c71302c4027ff62231 | xtensa | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b3dab8fd429a7435f9fadd2822a6a1d078aa889 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d1c930bf4a81f3328a7f69635b2959867ae3208c | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/29906b1f11be0ad1586604b7f012442c9aac24c9 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5f0152315c529d83b4db3607349e01702c793c42 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ece8fb406b5a5c96e61a7a400f517c4f76739eb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c73d43a11f3a9cee6848c2241bc9b870c28ed2e1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/092d9f7096a2dfbbdb027f04bbe9441ca72d8edd | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ab58ed5de10314590fe77029bffe1ee069fcde61 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/cd52a80ab6dba05bde55799f4ba4abf123166f99 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/cafa50416b5d4f7c4c867703ced0abb0750b40d1 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ff39e16376b753401f5b52ff00044501abe931a3 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fcc573e6d6d2374151f21b261b10b018d107eb18 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc93b398ceb0019eaa55315d919b3de1bf599bde | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed9c7377f831989aa2e3e5fec4e1eb5d1076b8f | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/027739a3658cc2c3068fbb2b9e42dd650241129b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77e91d226015c0138d50aa5d039a6774e110f90b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/704e80dd2f92bc4df95c3b7818a96286c77709cf | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5a264fc24774cf5138251ea3188506696d21d9d9 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d63f9fc6e1f025c481acbc39c0beb80ff5ad54c4 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/98bee4f45c09341ee88f36aed452520121261f6d | powerpc64 | host-gdb-11.2 | NOK | http://autobuild.buildroot.net/results/0bb5868be418ca5097f6e115348cecb5d7179fa8 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/c70fda6bcaa0c5693cbdcb1b46efbaf783b7d24e | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6141f75964ae1934aee5062d688fd0a398797e45 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/32e1d9b41e3aab396924b4b909e13ff647eb8c01 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e14007675306590f82f265eee2e02fb485b4d44 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/de00115d79d4f56f7f34320ee09bec6d189788e7 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/026afda547d8ad9921a7fe3a1e0a59c3dbe069d1 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/527e888f443397d13979586d8457f1054903c803 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2756798fa6ddf3df90a36c823053197a6635bef1 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a86c33fc570edb8ee5b95dd6ac552d55e7ba5234 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e440caba82e6480cb3c4198c553901e59f74598e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2793f6812928a120cca0f51ee685b43798071154 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/51119682fd942643277bd26bf1753f22443133f8 | riscv64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/1963e2a20e5f4a070141da7ccab30d9ddaf4bb9c | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ac2976e47e8e75351ab396d303216d694863828c | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/aaffec93e42ae90b726b197d9fd9bea36d38cb47 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/039a7163f1986c6936a48e24d2577b3677205ac1 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c4e46675060666e94663fed3db112b8e12581c4e | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/7422f83b06bd5af56ac74e2406d6c1bb050616c0 | powerpc64le | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/1b43c88f7530ca3e0bddc03ce3fd25a8ea703a6a | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3db83fde52b27472c4114dbbc947090ff286437e | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/69d43511d4c991fa14f17bd60b69c4ebda141d21 | powerpc64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9b32a1a00efc989ff06821a8c09f85361a7b6f74 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/edeaf7c54c7f77fc64c9513f85e9f11769e1b929 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c675ced0f5a5511c530f4e83fc73458a24b5bf47 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5e91f0d853b098d00491078fbb40721d3ade4acf | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6d7e9ec764081d4986dc096f281bec1950fe9e9f | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c5c1ca0df53381ee1a4dca1a6f17cf4ed65d152b | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cc2e65c4d514152b68588de11b88fe415a5964ec | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fd7699c3db7018a9f0500c785a115419783295b6 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f42a5800c535f2c1d656fc0c6ff01d613d411b9b | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08c0f743f20104f6071b360c4445418bc23ce0b0 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/dc9b292d8c3a0ad2f7257592d50baa7792da17f5 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/733112350785f6ff7124f22869efa85c8c86c137 | arm | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/e4fe1aac841d449425c84612fc3c39f072d7c6ae | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/99bf338bfbe4646c0e50bcf6724a9bece1a0efcd | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/372574ed58139636184209f3102565baf475fd1d | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/068f3cbb308a23cd8167da6220e1bca5e6acec8a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7ab1cb09e7620b69172d23411fb7af33cbea8c72 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2f2cdb840672e44f60dd7a695c8de7973871f727 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aeff18b9c1c44beffe8fee5c90fcede67ad9cdbc | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1a008e5db397161936784c94f75099093a3ddeb4 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2eebf8264327bd492ee8cadc0c539d42c4f2e252 | powerpc64le | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/b9980d150e61052802fcf5a26d36ccdf00410fb2 | ORPH powerpc | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/4e06cf71faff1e3e89f7e04169ce6882cceb169c | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/11ec3edb8790f602a93a9d2d353442dad94b2da6 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8fcbf3eedf789b725c7d6dca8af5aefce4c212b9 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/11a9c6e4ab1a0ed56b3d8b221be6d517f9126a38 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/76122eec98ef56001435cea154fb1acad015caab | nios2 | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e | ORPH nios2 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e49b9b5a0e05b7ec69965c4a3c4cc924372cf94e | sparc64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f6b6eea17d48570f8046d0a9baa6758f4e32c46c | arm | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f19e054ed34a87ee0603c6907a907e7ad5aa8a5f | powerpc64le | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/44a40ca5ee4b8c2bff09d896cffe14d42529894a | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c11545e65bfddfbc8fe016125d1cf740fda8f847 | ORPH armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/720b3c849383b027cd011c15b00bf2dd918f4dc0 | ORPH arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/61e5f0079f77aae29c6fa2101b2c40e841cf3b6f | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7a13eff0b168a6a0e768fde2f8fbc2785ef340d0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/01f6b24a5925e4716287f0215677fe13d807439c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ad69d1bc76780d5596a554e8ca17369b914298eb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ad0be4f4e7ec3e34542d2510129143ca7143b40c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d4ca489209d0e4710cebfa03926cfcb27981b0f2 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/57145e43fd6566710cdca38f830a95ec72d31d95 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/528c458037ccd82fa15aadb54dcb49198e7e6d6d | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/507fb53e8b52f80fe1b46d22dbb7046c2124cf6c | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/119156f54a8f8d87aba13bad65441cbae2d7443c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1e02b0ab2de70263c4fcfa8a15a8b3a787583453 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/433658eb347cde1d69802befcd34bf348b0ee17d | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/351b6c2ab7cdf11fd7859bda6b95445ff858db77 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2e11e06ca2bf7953aae1af01bb1b3063e8f1327f | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/acdd05b84fdfa2f552e8420a00992e93da4e0deb | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/94a313647b23c1476af956563e5efd2c2dc5d2de | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87a958d3ba36fb693335cd5971f152cf1f3910cf | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/56e99855a2bde09b0ef0c3573c986aa5255e0098 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/26290b38331045d91ae5613ce1bbcd7724cee321 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d948669c7764c280117779ae22586f458ccaf1d | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1abc0412bf530c0d61ffe79a30bd6d6bd8250f49 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e7fd5ac451fd717138b0b3fc3181ab814e49b0fb | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9c240092023059db9ce3315daefec8548b1cad0d | powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d1ab3d5f93476afcbde79d8802fc0fef27b94664 | microblaze | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/498b411f61c39dc322468028fe2ecaec8ae74105 | ORPH mips64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/abed41281bd2f0d21ea5a985dc329f9f253860f7 | ORPH xtensa | libxml2-2.10.2 | NOK | http://autobuild.buildroot.net/results/18f5d9360bb6464713ea6be0b15b8ebeb24caea2 | x86_64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3f3a539658c9c49ef0409a0aa6fb3f5fe95b6f7b | ORPH sh4eb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/297a98fd1d280444218203d582eeeca9c4d73452 | ORPH m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/eb36f9ec365e66bee649b88cf273a66a72b4d592 | ORPH arc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/f8ee607bf748f93558ee9fad45363e49c8102505 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7716fbd44a8820139c8dece0f01acc015ec89b78 | ORPH sh4a | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c4d4d559af8accc217b4cd5333e355cffbb9376f | ORPH x86_64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bddffff9d19ec1afb0f872bbc3982eaa63f712a0 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/031c90b637145931482457001dad14d75978f88f | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7f5d6ea3b0a5a8e9c770e1f9ed1e979c6b26535c | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/648af2f0604b2613bfec91123181290c0c7b86d4 | ORPH sh4a | linux-6.0 | NOK | http://autobuild.buildroot.net/results/a985cd7c65744002e38ebd063471d1d2dd3b2cfc | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/605ada98751cafe95d20eeb2ba7d0486241e9a72 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e3c117ed82bf7384d4df6d1f2926186500df11c2 | ORPH mips64el | linux-6.0 | NOK | http://autobuild.buildroot.net/results/35fc352b4ff8497ed8d9adc0cc1b612928d77c46 | ORPH riscv64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/da7334f8233c1043577adbb65cb4a5ff0940c7c4 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/f9e1df50ac4473c6da4e359c0e76747ce632bf0c | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/e062e16a296f8dac44e7c9d5e39f7d7421dc6084 | ORPH sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d50e74b8233904126badfd3196d80a90c3808a50 | sparc64 | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/3600a4abc96e25315f2a6c810e2dcc06878709f8 | s390x | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/e320013c7b46fa918368cbaabe0630bd1745aaff | x86_64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/73f96d31b3026027bbf9ce4b594cff4e0b258101 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/12fca8fb2e7dee5168b6048537109630114a3778 | powerpc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/3328a4fb317ddfcbcf8b101d9a8525a8ec09cf72 | ORPH microblaze | musepack-r475 | NOK | http://autobuild.buildroot.net/results/f9b249a380da4b1e0dea90e0e5e91aba3acfe192 | ORPH s390x | musepack-r475 | NOK | http://autobuild.buildroot.net/results/c7a1d0a9b386e1889e1f4060905be2aef3f30552 | ORPH sh4a | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d622b49271a1d9e4b3c25d52823c7b43bb20f5a1 | ORPH aarch64_be | musepack-r475 | NOK | http://autobuild.buildroot.net/results/305b82f567e4b555a87ec38d21ff987fb19bec42 | ORPH mips64el | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/867c7aded9c1c22ed2b2d4fcfdb4edddf6f7ddd3 | s390x | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/15a11beaf098574ddcbe96e61f3d429b7d21b50d | nios2 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/9da2cc167febc8b71faf1ab1a3e762a84ed0eb1b | arc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/dd59745d3ca5392ca52dd95a921e083e8a29aa14 | m68k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/b86d2ff346d837f71a7081520c036f22eec38332 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/147344ff0506f171c3bf9619d171e3e91d95f56a | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c58ed84b136231dbe1615f55341c8cbafc8d79a2 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/9dc991f88ed76f128f7329e8fac496c73cf724f2 | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/35b27b8633b1b5f1e2a1cc26ac93fe1482d8a4da | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5bdfd605ca8f2045450f1bef3e82e4375f27fc49 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/fd84803a0354cb27ea7b8f7c53b1759d98f5be61 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/91db0745d7c260260def085819a3ae12ad683a06 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e35514d57c843f2cdbd3669926c795a4de18f09a | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5c83cca0b67606e7f156a81ed0d997844e6e77be | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/ca9b1beb4a23cc2a97f9817e198d23ad550687e4 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/c9bb2f747ad186f10005bf8a3f16798c16f98921 | ORPH arm | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/8ef6b5c476c747020f3f51027e6614eeef1683d8 | sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/c3885e38714b562057a0317195592750e699466e | aarch64_be | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f6242bd5dfc3b4c841affc1cc31ac7c72bdd381a | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1333413453092506b684d52603019c31f74f9508 | ORPH m68k | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/149174e4c3fd9a2416039f81531be62c64f71415 | ORPH arc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/21ca84da0d3de0f3c95fd9ac81e9d1ffbcecadb7 | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/4013efa753638c5871b123f04c333e2a3976f6cc | powerpc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/1b2d287b563afa4fcb06fe6ecf37df59977038bb | microblazeel | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/14caf1a54f3712567aa267960f8c91892dbddaaa | armeb | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/8d2f41575c184e87645ebe1add0aa49e26b66668 | sh4a | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/133f95b7ef6bd4cd02c06233c4d1e0cd35bdfb9c | mips64el | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/d0992216d4088b3d075571ee30d50e7beb1b0875 | powerpc64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/84834395918de48f5b528d4959005ce39d6ddcbf | arc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/436483e8b2bcee488d90ca03bab34409c849a4a5 | riscv64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/f0cec18fd74fff5b2b91ec85b8e9b8e5f23c693b | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/06844aad9dc4174790da5678854166e0a1c3a001 | powerpc64le | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/5206fe7c08bfc1ef40696b3c9891596035bc88b6 | powerpc64le | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/e61c20a73cfedbec25be0aa72ca12e1c81b447e3 | ORPH mipsel | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/ba5768afd72420f756a9c8601755aceb3df79124 | ORPH sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/3c7557f030308c599c6c8b0f991319e96713e1ab | ORPH powerpc | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/78681675f647e5fc022f9d1969a864f1a07a6598 | ORPH powerpc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/fb12ad987b8e1c0f8c86b5b723ef1801b06f567b | ORPH microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/921826f6cf0dcb3d00cf0b9e65bae72cad6f07e4 | arceb | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/31e6a6be3404add38fe890549c09bfccf4af33c8 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/0aacdf29e1c0cb4cf9c14a674da5dc7da7db149d | aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9d524de9a2228c625f37e75d447ee45fe7e74e72 | ORPH arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6570c0e2f3bc59658c36c1fce3e50d6c8334fb4c | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0d6499f7e318ebc73466847e65680381b2857751 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2b1e6cf1fd1f200305bd7420b065d87b8583975b | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1c82c276f6f7d9e05d2bbcb05d47244b31dd829e | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1937e17df21c1d81b1bcc1756a98632d443f93fe | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c1ab1167208a8883097c23b046d900754daefa4e | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/829fd0a4e957750baca58a57bbc09d5e05753b70 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b060b49ab597b4ab80c16f683fbbb88a586c51b7 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7753e0ca864b0f625ab70532354afad05ba84cd4 | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4bd9f930d56a884e9dac9402c687484684656a9d | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b83754005952287b6988fd6292afdb5e50650f6b | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0799c44cd783bb30d99497a8e0916a9c34fc4d3d | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b774271fe8c3f2f59a2cc18d06d45ac806ce935a | ORPH s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/300d7fe6820f90d30a8819eb656d827e3848fee1 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4a798d8a3dcc7adaf390536c597fea3fc6c126f6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/631127bf2d0d0e1b1075d591d80e20233616c0c0 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f33da6c9fa8c4c8dbf8fb7a4ceba1fff25b987ae | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1ce8dd5008995631d7d86d638db86472d884cd88 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0c62b45ec8a545ebd0caef55774d49ece01b0815 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b0b84c0fca3c2cc7c8b7f838dec5c592cd523ba | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c7175756cefc951e036f52ec235ba42d516547e6 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1c3c48b8df8292090be61bcae8eba068489b747a | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ceb58d7fe50f56a8b8b38b9652cef0bf8ae48fa4 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f5a09339a05446f28d40e0e1f4f64d4454063279 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f8d8c4ef4e4733bc4f336809a3314202be7e045a | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f7ef7cafbbdffc9a71550426b0232e562ddf5ec6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7a6be774b6afe318543481623f6b299d66ad33fe | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/b0bfae798f9872ecc2fb9a1be8a3b266f5c4e5bd | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/14713962ba365916fce0e8a4ebec469be0559876 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/08f506147e69e3f86e15262a724116b4c7fbcfc2 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/56b10b629b2efabf112ab2593e22b050c6dba6b0 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9b471a5b640ad90832788d55be532a545c56e92b | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/72172f241868c3a3ef716396783c0f7a6dfaad96 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/de0b90fbe73c2b911bcce49369524846d25a59c1 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/733a8f18dd53452b2c65bc4c7e8c28b564c2a61f | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/89e968c76baae1c4cf908217b60c907725161aa7 | arceb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ca02f50ca5a6b5f8438ee051a8b7a7a5a6f71958 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/77fe0b68e4d7176bc275bb62f18794c4255c9681 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e1381c9fc1a90955ec305635b060b22807daf4b4 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0fd978c088a6e795dfb1c6465218767b728f0174 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c31d593f180dac5eb2ca0763204f26d84d4522c7 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bc4504723e84c3dd96fd3b25039645512b8a2dd0 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/88f37f362cbd67fc0a65f014a8343356e8653acd | ORPH sh4eb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0d88953ac5097b1e15f064a93dd9ab135ce37990 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6e67bca6800f8732fde34992da8fbf6b274acceb | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ab836555bf1322c04c8843aa3d9c5a90c385bc63 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/59d75a2fd966bc5120e171d8033af15f8a414eae | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e2583f9206ab877085570e320041205ae7b2419 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/af49de68427fe32d7e9f0bae0d77c114301e7f66 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4de89daa362136d5fdfbeb580be354bbb8715c84 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/838020eab3f34c5aaa50ddde805564d2364386a3 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bb41841826596d0b49f0d84f465fc556c9969d4e | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0d972307ad2d5459be9866eaedf465646f03e449 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/0ed18b82fd23cf6ad4452f99b3e7757f854732df | armeb | tiff-4.4.0 | NOK | http://autobuild.buildroot.net/results/c2ab5318eb0fc97b1f949e82549d46e91959503d | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c880702bbcca8d95a2ed814f53be4e06e6c55041 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/9670f8e5b1f65299f1146dceca217b84be7c53e9 | ORPH armeb | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/a028fac2d625b0d61be3f7dc307765f1de91b5c9 | powerpc | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/074837f0a6b3f6ac4615db868b01f8a480c6969c | powerpc64 | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/f13273cb65f80c681cec136986f12c659cfa5368 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/24cae7e26564467f215cb26bb0f4aa7443c9699c | mips64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/80c258c8e157d516c8314de3a6922ed7e06d2b7f | arm | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/ae7ece09646536cdc248f640f190cd85c9df27db | sh4aeb | unknown | NOK | http://autobuild.buildroot.net/results/d170ac638637edfcfab9d45c7793edfb519217e2 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/e85af8698b0f08b40e1b23e0a81542b068f928a4 | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/faaaf52b3813bff8f7e5a4a73b207dab8d072ab1 | aarch64_be | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/c9403e8fd3bdd9d3ff41b974fd8afd4430f00c15 | arc | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/468aa35c79cc8cbb34d86325c0b544a4841d14d3 | mips64el | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/6591d57726620d18987167f08317dc1679cacf26 | ORPH nios2 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/343fea7d2c348de1d46260462f425e657d74a2c6 | ORPH mipsel | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/7ce3854e28065a8d9ba4f65c7c9c601df3418d91 | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/eb27618ea7ab6ebea09610d28056e07fed623c08 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/150cbaa9850b79757f8ae9fe967a07b996fee5a5 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/be82e2e8419ff49980bef552a59365c5b8db5b50 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/07e5b452acf8d767735edbdcb39cefa9fedeb126 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d7c790bee5a478790d18c4b8b6383a9e7d7ebd59 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f70438a8d4edd462bbe77de5ce5a116c72864b9f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b8933c0cbd1efe942887321a3585a80ff99d5923 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c8773bf236dc9ff347365c284f40a09f44839183 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8ea278c370dabc9c96614e1c066d9e83e7c3ed27 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/080da78bd9c29b032909b146044001e02197b837 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/77d6716def26ba2717c0733ae6b0a8b5669af273 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4853ce0a3b2a02a41ff128ddad7afd571b6be6ae | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/43bc52343a1c314eb7ecadd7726cd03bea7aaa9f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/cbcdab2493d225e247a08c03b74ec237cf526f79 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4beb3584984b9d93b47ec376458fb18d8e4c6eab | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/ef2a94d3065f064df6232e3f5ca48d66378f1957 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9574e517d040dd1d574413a0aa940a7fc6b7146f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0d8ac9f2f37d668ed67f76c84ecf80a596e8c432 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9d3d864895a8a6f4f623ff5a7d10a48ffb6ae9f4 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/04d4c7ff7c32ea7b2b556a41ed658b123b545eac | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c03a658666752d3cb96f2c7aa7cf1c91c587035b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f724601c55d0be83669828099502c9f63944156b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f079952d89ac5ad7e5a4cd4283f4217f5c13fcfd | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/263a3fa63a6b86abceb1d4d0e74af51813e1f3e4 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/dfb05df16f580e67cc94baff7a055228f8f4bc0a | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/774ab1c33474820284b61280a6776648cc97372d | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/f084a5df6f3a04fdbb67615dbe2fe9a2d7f948e4 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/4f03b881ef0589672b482442f37d6255a40069d2 | Classification of failures by reason for 2022.02.x -------------------------------------------------- bat-0.19.0 | 1 exempi-2.6.1 | 1 igd2-for-linux-2.1 | 1 mongodb-4.2.18 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/bf5af5b3756f78258183aea401eff9f8bb5dec27 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/99206d8634a049a44fecc48fc3fb84c8ea284204 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/abd602630a6c0c82da64f0d92a1476af7f414629 | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/4a26c9c37818d24c30f67cf8af42b6ea04e43cb8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- fontconfig-2.13.1 | 1 host-gcc-initial-12.1.0 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 libcap-ng-0.8.3 | 1 libglib2-2.72.3 | 1 libnss-3.81 | 1 linux-5.10.109-cip5-rt4 | 1 vlc-3.0.17.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/f363e709c411c068702113318ed9873e480972ed | ORPH armeb | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/27bf6c66fb28ed4f1d04008d3ac4a7a784894fda | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/64c4731a2f99b53c0327e847e383170f15c2adf4 | s390x | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/bf53633a5d11f4ec2d33886deac639edf9e1bd6b | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/6a55c18203e90c016eba1be8a6581fbe8ccdabc6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/23aad28d266ee4c8d86e6773aa41dc960ebf66c2 | sh4a | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/ec5c9e489f7919c0d5d27ca130a6e78257097b90 | mips | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/82661b426b63c64b27cab5cf2260b2b40356c59a | ORPH s390x | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/646d73d0806bd17ccf5a9fbec69558d746405f44 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 16 07:50:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 09:50:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: <20221016075056.GI2503@scaer> James, All, On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine > wrote: > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > >> The bearssl package is not compatible with parallel builds. > > bearssl was building perfectly fine up until now and it seems there > > are a lot of packages that are affected by parallel build issues > > (e.g. dmraid, musepack, slang, etc). > > Some parallel build bugs don't reproduce reliably due to timing, I made a change > to my autobuilders which massively increases the chance of triggering > build failures > in packages which have dependency graph bugs. This triggers build build failures > in -j1 builds which would otherwise only appear when running parallel builds(my > autobuilders are generally running with -j1 to make the logs more readable). > > > Did we change something recently on the autobuilders? > > Yes, all my autobuilders were recently changed to use make master(will be > make version 4.4 once released) with top level --shuffle=random. By disabling parallel build because you are using ana as yet unreleased version, we remove the parallel build for everyone, which is not very nice at all. Instead, we should really try and fix the packages rather than papering over the issue. Notes: - it *is* interesting to find those bugs; - it is sad that the default mode for --shuffle will be random, not none. Regards, Yann E. MORIN. > Details: > https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 > https://trofi.github.io/posts/238-new-make-shuffle-mode.html > http://trofi.github.io/posts/249-an-update-on-make-shuffle.html > > Note that MAKE1 is currently broken itself without this when using shuffle mode: > https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > > > >> > >> > >> Fixes: > >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > >> > >> Signed-off-by: James Hilliard > >> --- > >> package/bearssl/bearssl.mk | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > >> index ff5f4e87b7..c2a5760af5 100644 > >> --- a/package/bearssl/bearssl.mk > >> +++ b/package/bearssl/bearssl.mk > >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > >> endif > >> > >> define BEARSSL_BUILD_CMDS > >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > >> $(BEARSSL_TARGETS) > >> endef > >> > >> -- > >> 2.34.1 > >> > > Best Regards, > > > > Fabrice > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From clabbe at baylibre.com Sun Oct 16 08:06:29 2022 From: clabbe at baylibre.com (Corentin Labbe) Date: Sun, 16 Oct 2022 08:06:29 +0000 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme Message-ID: <20221016080629.3354482-1-clabbe@baylibre.com> Current ffmpeg package does not install ffplay. The root cause is that ffmpeg configure does not detect SDL2 due to version mismatch. The patch fixing that is taken from gentoo portage tree. Signed-off-by: Corentin Labbe --- ...peg-4.4.2-libsdl2-new-version-scheme.patch | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch diff --git a/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch b/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch new file mode 100644 index 0000000000..b592c2f9b7 --- /dev/null +++ b/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch @@ -0,0 +1,25 @@ +https://git.ffmpeg.org/gitweb/ffmpeg.git/commitdiff/839f98ff6719cf2db0cbd88cd787a1b19b9cbf47 + +From: Christopher Degawa +Date: Wed, 11 May 2022 15:11:04 -0500 +Subject: [PATCH] configure: extend SDL check to accept all 2.x versions + +sdl2 recently changed their versioning, moving the patch level to minor level +https://github.com/libsdl-org/SDL/commit/cd7c2f1de7d9e418bb554047d714dd7cacc020ff +and have said that they will instead ship sdl3.pc for 3.0.0 + +Fixes ticket 9768 + +Signed-off-by: Christopher Degawa +Signed-off-by: Gyan Doshi +--- a/configure ++++ b/configure +@@ -6383,7 +6383,7 @@ fi + + if enabled sdl2; then + SDL2_CONFIG="${cross_prefix}sdl2-config" +- test_pkg_config sdl2 "sdl2 >= 2.0.1 sdl2 < 2.1.0" SDL_events.h SDL_PollEvent ++ test_pkg_config sdl2 "sdl2 >= 2.0.1 sdl2 < 3.0.0" SDL_events.h SDL_PollEvent + if disabled sdl2 && "${SDL2_CONFIG}" --version > /dev/null 2>&1; then + sdl2_cflags=$("${SDL2_CONFIG}" --cflags) + sdl2_extralibs=$("${SDL2_CONFIG}" --libs) -- 2.25.1 From troglobit at gmail.com Sun Oct 16 10:43:45 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 16 Oct 2022 12:43:45 +0200 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme In-Reply-To: <20221016080629.3354482-1-clabbe@baylibre.com> References: <20221016080629.3354482-1-clabbe@baylibre.com> Message-ID: <86ilkkcala.fsf@gmail.com> On Sun, Oct 16, 2022 at 08:06, Corentin Labbe wrote: > Current ffmpeg package does not install ffplay. The root cause is > that ffmpeg configure does not detect SDL2 due to version mismatch. > The patch fixing that is taken from gentoo portage tree. > > Signed-off-by: Corentin Labbe Reviewed-by: Joachim Wiberg From fperrad at gmail.com Sun Oct 16 11:33:41 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 16 Oct 2022 13:33:41 +0200 Subject: [Buildroot] [PATCH] package/lualogging: bump to version 1.7.0 Message-ID: <20221016113341.3759990-1-francois.perrad@gadz.org> diff COPYRIGHT: -Copyright (c) 2004-2021 Kepler Project. +Copyright (c) 2004-2022 Kepler Project. Signed-off-by: Francois Perrad --- package/lualogging/lualogging.hash | 4 ++-- package/lualogging/lualogging.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lualogging/lualogging.hash b/package/lualogging/lualogging.hash index 1fc8694e8..a9eadab4d 100644 --- a/package/lualogging/lualogging.hash +++ b/package/lualogging/lualogging.hash @@ -1,3 +1,3 @@ # computed by luarocks/buildroot -sha256 d29c9c78e4266d9390069b2a5f7afacfcf9189dea12ce3774a5aa4e3cdbcd89f lualogging-1.6.0-1.src.rock -sha256 4d95b123e667a13615f567a829aa39211dd55b0b48c9f247bf3fcc5c0b485da7 lualogging/COPYRIGHT +sha256 d4a8791e9b24840c4a4c0366399f55b6deb060fc3947f3a9aae9ced0334160c1 lualogging-1.7.0-1.src.rock +sha256 d900082cb26f8cf4a491ca51c00241f2c2e9cd9ae3531c62234017a360706adb lualogging/COPYRIGHT diff --git a/package/lualogging/lualogging.mk b/package/lualogging/lualogging.mk index 4d01f546e..78197f6be 100644 --- a/package/lualogging/lualogging.mk +++ b/package/lualogging/lualogging.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUALOGGING_VERSION = 1.6.0-1 +LUALOGGING_VERSION = 1.7.0-1 LUALOGGING_SUBDIR = lualogging LUALOGGING_LICENSE = MIT LUALOGGING_LICENSE_FILES = $(LUALOGGING_SUBDIR)/COPYRIGHT -- 2.34.1 From peter at korsgaard.com Sun Oct 16 14:58:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 In-Reply-To: <20221015223439.202348-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:34:39 +0200") References: <20221015223439.202348-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfnerxu.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles > - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE > - Fix overflow check in SAX2.c > https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:29 +0200 Subject: [Buildroot] [PATCH 01/12] package/gstreamer1: bump to version 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:23 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <87bkqberxm.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:32 +0200 Subject: [Buildroot] [PATCH 02/12] package/gst1-plugins-base: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-2-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:24 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-2-james.hilliard1@gmail.com> Message-ID: <877d0zerxj.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:43 +0200 Subject: [Buildroot] [PATCH 03/12] package/gst1-plugins-good: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-3-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:25 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-3-james.hilliard1@gmail.com> Message-ID: <8735bnerx8.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:46 +0200 Subject: [Buildroot] [PATCH 04/12] package/gst1-plugins-bad: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-4-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:26 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-4-james.hilliard1@gmail.com> Message-ID: <87y1tfddcp.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:50 +0200 Subject: [Buildroot] [PATCH 05/12] package/gst1-plugins-ugly: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-5-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:27 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-5-james.hilliard1@gmail.com> Message-ID: <87tu43ddcl.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:55 +0200 Subject: [Buildroot] [PATCH 06/12] package/gst1-devtools: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-6-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:28 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-6-james.hilliard1@gmail.com> Message-ID: <87pmerddcg.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:06 +0200 Subject: [Buildroot] [PATCH 07/12] package/gst1-libav: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-7-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:29 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-7-james.hilliard1@gmail.com> Message-ID: <87lepfddc5.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:11 +0200 Subject: [Buildroot] [PATCH 08/12] package/gst1-vaapi: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-8-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:30 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-8-james.hilliard1@gmail.com> Message-ID: <87h703ddc0.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:17 +0200 Subject: [Buildroot] [PATCH 09/12] package/gst1-rtsp-server: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-9-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:31 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-9-james.hilliard1@gmail.com> Message-ID: <87czarddbu.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:01 +0200 Subject: [Buildroot] [PATCH 10/12] package/gstreamer1-editing-services: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-10-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:32 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-10-james.hilliard1@gmail.com> Message-ID: <878rlfddam.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:11 +0200 Subject: [Buildroot] [PATCH 11/12] package/gst-omx: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-11-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:33 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-11-james.hilliard1@gmail.com> Message-ID: <874jw3ddac.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:16 +0200 Subject: [Buildroot] [PATCH 12/12] package/gst1-python: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-12-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:34 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-12-james.hilliard1@gmail.com> Message-ID: <87zgdvbypr.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:52 +0200 Subject: [Buildroot] [PATCH v2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221016022051.3870975-1-judge.packham@gmail.com> (Chris Packham's message of "Sun, 16 Oct 2022 15:20:51 +1300") References: <20221016022051.3870975-1-judge.packham@gmail.com> Message-ID: <87v8ojbyor.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > Add new version. Remove patch that has been applied upstream. Update > hash for COPYING as it's text has changed to clarify some details but > the license remains LGP-2.0+L/GPL-2.0+. > Signed-off-by: Chris Packham > --- > Notes: > Changes in v2: > - update version in syslog-ng.conf Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:01:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:19 +0200 Subject: [Buildroot] [PATCH] package/lualogging: bump to version 1.7.0 In-Reply-To: <20221016113341.3759990-1-francois.perrad@gadz.org> (Francois Perrad's message of "Sun, 16 Oct 2022 13:33:41 +0200") References: <20221016113341.3759990-1-francois.perrad@gadz.org> Message-ID: <87r0z7byo0.fsf@dell.be.48ers.dk> >>>>> "Francois" == Francois Perrad writes: > diff COPYRIGHT: > -Copyright (c) 2004-2021 Kepler Project. > +Copyright (c) 2004-2022 Kepler Project. > Signed-off-by: Francois Perrad Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:02:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:10 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/lrzip: security bump to version 0.651 In-Reply-To: <20221015222605.171104-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:26:05 +0200") References: <20221015222605.171104-1-fontaine.fabrice@gmail.com> Message-ID: <87mt9vbyml.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple > concurrency use-after-free between the functions zpaq_decompress_buf() > and clear_rulist(). This vulnerability allows attackers to cause a > Denial of Service (DoS) via a crafted Irz file. > - Use official tarball and so drop autoreconf > https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Drop autoreconf Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:02:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:40 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: needs host-pkgconf In-Reply-To: <20221015220913.151173-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:09:13 +0200") References: <20221015220913.151173-1-fontaine.fabrice@gmail.com> Message-ID: <87ilkjbylr.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > host-pkgconf is needed since bump to version 1.16.1 in commit > c8ed72c15d39cc6c676485bff8955ac5f4258138 and > https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: > checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' > ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' > Fixes: > - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:56:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:56:58 +0200 Subject: [Buildroot] [git commit] package/libxml2: security bump to version 2.10.3 Message-ID: <20221016150424.88C2C86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=df77618b12bfd442e5efd39abd013c3ba88481b8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From peter at korsgaard.com Sun Oct 16 14:57:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:41 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-good: bump version to 1.20.4 Message-ID: <20221016150424.AB31E86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b0696cb6786c20f732dc7bd6a443c8d3b9f50e1e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash | 4 ++-- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash index 81da41388f..b30c512878 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.3.tar.xz.sha256sum -sha256 f8f3c206bf5cdabc00953920b47b3575af0ef15e9f871c0b6966f6d0aa5868b7 gst-plugins-good-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.4.tar.xz.sha256sum +sha256 b16130fbe632fa8547c2147a0ef575b0140fb521065c5cb121c72ddbd23b64da gst-plugins-good-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk index de7dcb985d..cc7bab5824 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_GOOD_VERSION = 1.20.3 +GST1_PLUGINS_GOOD_VERSION = 1.20.4 GST1_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST1_PLUGINS_GOOD_VERSION).tar.xz GST1_PLUGINS_GOOD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-good GST1_PLUGINS_GOOD_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 16 14:59:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:03 +0200 Subject: [Buildroot] [git commit] package/gst1-libav: bump version to 1.20.4 Message-ID: <20221016150424.D742D86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ad104d1c63c0be58610c090b3ce7cb5907b72ba4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-libav/gst1-libav.hash | 4 ++-- package/gstreamer1/gst1-libav/gst1-libav.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-libav/gst1-libav.hash b/package/gstreamer1/gst1-libav/gst1-libav.hash index 1b86e82b93..78f5b5bb07 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.hash +++ b/package/gstreamer1/gst1-libav/gst1-libav.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.3.tar.xz.sha256sum -sha256 3fedd10560fcdfaa1b6462cbf79a38c4e7b57d7f390359393fc0cef6dbf27dfe gst-libav-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.4.tar.xz.sha256sum +sha256 04ccbdd58fb31dd94098da599209834a0e7661638c5703381dd0a862c56fc532 gst-libav-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-libav/gst1-libav.mk b/package/gstreamer1/gst1-libav/gst1-libav.mk index 80545fdd4c..a867af5147 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.mk +++ b/package/gstreamer1/gst1-libav/gst1-libav.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_LIBAV_VERSION = 1.20.3 +GST1_LIBAV_VERSION = 1.20.4 GST1_LIBAV_SOURCE = gst-libav-$(GST1_LIBAV_VERSION).tar.xz GST1_LIBAV_SITE = https://gstreamer.freedesktop.org/src/gst-libav GST1_LIBAV_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:57:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:48 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-bad: bump version to 1.20.4 Message-ID: <20221016150424.B5D6586766@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f6158c37f2d5dbe98932a98d4a0393a7bb730d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash | 4 ++-- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash index 5a413cd350..c8789a707d 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.3.tar.xz.sha256sum -sha256 7a11c13b55dd1d2386dd902219e41cbfcdda8e1e0aa3e738186c95074b35da4f gst-plugins-bad-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.4.tar.xz.sha256sum +sha256 a1a3f53b3604d9a04fdd0bf9a1a616c3d2dab5320489e9ecee1178e81e33a16a gst-plugins-bad-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk index 57974d723a..14710a2501 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BAD_VERSION = 1.20.3 +GST1_PLUGINS_BAD_VERSION = 1.20.4 GST1_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST1_PLUGINS_BAD_VERSION).tar.xz GST1_PLUGINS_BAD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-bad GST1_PLUGINS_BAD_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 14:57:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:21 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-base: bump version to 1.20.4 Message-ID: <20221016150424.9F1E886755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c81289645f8cf2160bd029e1eec15229c6e13ebd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash | 4 ++-- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash index 105708f1da..5c729d832f 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.3.tar.xz.sha256sum -sha256 7e30b3dd81a70380ff7554f998471d6996ff76bbe6fc5447096f851e24473c9f gst-plugins-base-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.4.tar.xz.sha256sum +sha256 8d181b7abe4caf23ee9f9ec5b4d3e232640452464e39495bfffb6d776fc97225 gst-plugins-base-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk index c244a0c621..d225cdf910 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BASE_VERSION = 1.20.3 +GST1_PLUGINS_BASE_VERSION = 1.20.4 GST1_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST1_PLUGINS_BASE_VERSION).tar.xz GST1_PLUGINS_BASE_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-base GST1_PLUGINS_BASE_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 14:57:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:55 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-ugly: bump version to 1.20.4 Message-ID: <20221016150424.C246286709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c29f2bff5254f3fc46044fcc5a45a99fc88b8e80 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash | 4 ++-- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash index ffd060f465..4ec29e6894 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.3.tar.xz.sha256sum -sha256 8caa20789a09c304b49cf563d33cca9421b1875b84fcc187e4a385fa01d6aefd gst-plugins-ugly-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.4.tar.xz.sha256sum +sha256 5c9ec6bab96517e438b3f9bae0ceb84d3436f3da9bbe180cf4d28e32a7251b59 gst-plugins-ugly-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk index 131163e20a..20382719c3 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_UGLY_VERSION = 1.20.3 +GST1_PLUGINS_UGLY_VERSION = 1.20.4 GST1_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST1_PLUGINS_UGLY_VERSION).tar.xz GST1_PLUGINS_UGLY_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-ugly GST1_PLUGINS_UGLY_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 16 14:59:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:30 +0200 Subject: [Buildroot] [git commit] package/gst1-rtsp-server: bump version to 1.20.4 Message-ID: <20221016150424.ED91E86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=076bf46d33ce8e5c55b88dea68bf4fc703c7791c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash | 4 ++-- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash index 13dcb764d8..b6a31f8796 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash @@ -1,4 +1,4 @@ -# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.3.tar.xz.sha256sum -sha256 ee402718be9b127f0e5e66ca4c1b4f42e4926ec93ba307b7ccca5dc6cc9794ca gst-rtsp-server-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.4.tar.xz.sha256sum +sha256 88d9ef634e59aeb8cc183ad5ae444557c5a88dd49d833b9072bc6e1fae6a3d7d gst-rtsp-server-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING.LIB diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk index 02cf9e5eb1..0b18c1fcf8 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_RTSP_SERVER_VERSION = 1.20.3 +GST1_RTSP_SERVER_VERSION = 1.20.4 GST1_RTSP_SERVER_SOURCE = gst-rtsp-server-$(GST1_RTSP_SERVER_VERSION).tar.xz GST1_RTSP_SERVER_SITE = http://gstreamer.freedesktop.org/src/gst-rtsp-server GST1_RTSP_SERVER_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:58:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:40 +0200 Subject: [Buildroot] [git commit] package/gst1-devtools: bump version to 1.20.4 Message-ID: <20221016150424.CC42D86751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bc5ab96f7c76d0c5c2a064c661616187d9a76af3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-devtools/gst1-devtools.hash | 4 ++-- package/gstreamer1/gst1-devtools/gst1-devtools.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.hash b/package/gstreamer1/gst1-devtools/gst1-devtools.hash index bed13db295..fc504a2c12 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.hash +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.3.tar.xz.sha256sum -sha256 bbbd45ead703367ea8f4be9b3c082d7b62bef47b240a39083f27844e28758c47 gst-devtools-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.4.tar.xz.sha256sum +sha256 82a293600273f4dd3eed567aae510ca0c7d629c3807788b00e6cdbd1d2459a84 gst-devtools-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 validate/COPYING diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.mk b/package/gstreamer1/gst1-devtools/gst1-devtools.mk index 14f665a408..fbb04c92ef 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.mk +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_DEVTOOLS_VERSION = 1.20.3 +GST1_DEVTOOLS_VERSION = 1.20.4 GST1_DEVTOOLS_SOURCE = gst-devtools-$(GST1_DEVTOOLS_VERSION).tar.xz GST1_DEVTOOLS_SITE = https://gstreamer.freedesktop.org/src/gst-devtools GST1_DEVTOOLS_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 15:00:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:09 +0200 Subject: [Buildroot] [git commit] package/gst-omx: bump version to 1.20.4 Message-ID: <20221016150425.1144E86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8513099bc2315047629907f8457a94987e4df47a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst-omx/gst-omx.hash | 4 ++-- package/gstreamer1/gst-omx/gst-omx.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst-omx/gst-omx.hash b/package/gstreamer1/gst-omx/gst-omx.hash index 8abf4a27e8..140ad626f7 100644 --- a/package/gstreamer1/gst-omx/gst-omx.hash +++ b/package/gstreamer1/gst-omx/gst-omx.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.3.tar.xz.sha256sum -sha256 8db48040bb41f09edf8d17ff6d16c54888d7777ba4501c2c69f0083350ea9a15 gst-omx-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.4.tar.xz.sha256sum +sha256 70ddd485e2dcab79070164d61ad2ff3a63e15a1d7abf9075d86eb77762b0edfd gst-omx-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst-omx/gst-omx.mk b/package/gstreamer1/gst-omx/gst-omx.mk index 085bff87ad..d644c44995 100644 --- a/package/gstreamer1/gst-omx/gst-omx.mk +++ b/package/gstreamer1/gst-omx/gst-omx.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST_OMX_VERSION = 1.20.3 +GST_OMX_VERSION = 1.20.4 GST_OMX_SOURCE = gst-omx-$(GST_OMX_VERSION).tar.xz GST_OMX_SITE = https://gstreamer.freedesktop.org/src/gst-omx From peter at korsgaard.com Sun Oct 16 14:59:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:57 +0200 Subject: [Buildroot] [git commit] package/gstreamer1-editing-services: bump version to 1.20.4 Message-ID: <20221016150425.0337E86751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=86a6d5ad118a2afc52809ea18e4864050de2127d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- .../gstreamer1-editing-services/gstreamer1-editing-services.hash | 4 ++-- .../gstreamer1-editing-services/gstreamer1-editing-services.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash index 18dd1a79b3..308596d7cd 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash @@ -1,5 +1,5 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.3.tar.xz.sha256sum -sha256 5fd896de69fbe24421eb6b0ff8d2f8b4c3cba3f3025ceacd302172f39a8abaa2 gst-editing-services-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.4.tar.xz.sha256sum +sha256 aa03e983af5d79c1befffe3575b034e60960619a96bf877447cb73c28016fc41 gst-editing-services-1.20.4.tar.xz # Hashes for license files: sha256 f445dc78b88496f7e20c7a2a461b95baba5865c8919b8289ac24ac0a80c6ce7a COPYING diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk index 417aaf2a45..77feb15991 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.3 +GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.4 GSTREAMER1_EDITING_SERVICES_SOURCE = gst-editing-services-$(GSTREAMER1_EDITING_SERVICES_VERSION).tar.xz GSTREAMER1_EDITING_SERVICES_SITE = https://gstreamer.freedesktop.org/src/gstreamer-editing-services GSTREAMER1_EDITING_SERVICES_LICENSE = LGPL-2.0+ From peter at korsgaard.com Sun Oct 16 15:00:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:29 +0200 Subject: [Buildroot] [git commit] package/syslog-ng: Bump version to 3.38.1 Message-ID: <20221016150425.2691C86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db63f65945527527f90b58113d9a56fbcd49c275 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham Signed-off-by: Peter Korsgaard --- .../0002-lib-tlscontext.c-fix-libressl-build.patch | 85 ---------------------- package/syslog-ng/syslog-ng.conf | 2 +- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 4 files changed, 4 insertions(+), 89 deletions(-) diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.conf b/package/syslog-ng/syslog-ng.conf index 45b94facf9..69db9b4b78 100644 --- a/package/syslog-ng/syslog-ng.conf +++ b/package/syslog-ng/syslog-ng.conf @@ -1,4 +1,4 @@ - at version: 3.37 + at version: 3.38 source s_sys { file("/proc/kmsg" program_override("kernel")); diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt From peter at korsgaard.com Sun Oct 16 14:59:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:24 +0200 Subject: [Buildroot] [git commit] package/gst1-vaapi: bump version to 1.20.4 Message-ID: <20221016150424.E3F6D86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=004129e259d44bd453d546a0acdc718ca71d8c1d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-vaapi/gst1-vaapi.hash | 4 ++-- package/gstreamer1/gst1-vaapi/gst1-vaapi.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash index fce687774a..5baaa4dfb7 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.3.tar.xz.sha256sum -sha256 6ee99eb316abdde9ad37002915bd8c3867918f6fdc74b7cf2ac4c1ae0d690b45 gstreamer-vaapi-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.4.tar.xz.sha256sum +sha256 ab12596144c05506e9782374c5d2cdfb3069fca89908d6de360d947bb77fd06a gstreamer-vaapi-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LIB diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk index 8b137c37ec..bd6c16be3e 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_VAAPI_VERSION = 1.20.3 +GST1_VAAPI_VERSION = 1.20.4 GST1_VAAPI_SITE = https://gstreamer.freedesktop.org/src/gstreamer-vaapi GST1_VAAPI_SOURCE = gstreamer-vaapi-$(GST1_VAAPI_VERSION).tar.xz GST1_VAAPI_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:57:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:05 +0200 Subject: [Buildroot] [git commit] package/gstreamer1: bump to version 1.20.4 Message-ID: <20221016150424.9410C82A70@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08a6aab0f0ecd12b96e6977c7ec4d4e9d84ac26e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gstreamer1/gstreamer1.hash | 4 ++-- package/gstreamer1/gstreamer1/gstreamer1.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1/gstreamer1.hash b/package/gstreamer1/gstreamer1/gstreamer1.hash index 5daadfae74..5fb52606fe 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.hash +++ b/package/gstreamer1/gstreamer1/gstreamer1.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.3.tar.xz.sha256sum -sha256 607daf64bbbd5fb18af9d17e21c0d22c4d702fffe83b23cb22d1b1af2ca23a2a gstreamer-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.4.tar.xz.sha256sum +sha256 67c1edf8c3c339cda5dde85f4f7b953bb9607c2d13ae970e2491c5c4c055ef5f gstreamer-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gstreamer1/gstreamer1.mk b/package/gstreamer1/gstreamer1/gstreamer1.mk index 89d5f93d43..16c016b145 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.mk +++ b/package/gstreamer1/gstreamer1/gstreamer1.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_VERSION = 1.20.3 +GSTREAMER1_VERSION = 1.20.4 GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz GSTREAMER1_SITE = https://gstreamer.freedesktop.org/src/gstreamer GSTREAMER1_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 15:02:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:36 +0200 Subject: [Buildroot] [git commit] package/libdnet: needs host-pkgconf Message-ID: <20221016150425.465FF86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e7c5529e9c080e4f860ef3276aa9ed9e01b3fa42 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master host-pkgconf is needed since bump to version 1.16.1 in commit c8ed72c15d39cc6c676485bff8955ac5f4258138 and https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' Fixes: - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdnet/libdnet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 1e75dae323..dc56b892b4 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -14,6 +14,7 @@ LIBDNET_CONF_OPTS = \ --with-gnu-ld \ --with-check=no LIBDNET_CONFIG_SCRIPTS = dnet-config +LIBDNET_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_LIBDNET_PYTHON),y) LIBDNET_DEPENDENCIES += host-python-cython python3 From peter at korsgaard.com Sun Oct 16 15:01:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:11 +0200 Subject: [Buildroot] [git commit] package/lualogging: bump to version 1.7.0 Message-ID: <20221016150425.31E1686751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51812c339078e5db20ef8dec06b24c36a0d22208 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master diff COPYRIGHT: -Copyright (c) 2004-2021 Kepler Project. +Copyright (c) 2004-2022 Kepler Project. Signed-off-by: Francois Perrad Signed-off-by: Peter Korsgaard --- package/lualogging/lualogging.hash | 4 ++-- package/lualogging/lualogging.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lualogging/lualogging.hash b/package/lualogging/lualogging.hash index 1fc8694e84..a9eadab4d1 100644 --- a/package/lualogging/lualogging.hash +++ b/package/lualogging/lualogging.hash @@ -1,3 +1,3 @@ # computed by luarocks/buildroot -sha256 d29c9c78e4266d9390069b2a5f7afacfcf9189dea12ce3774a5aa4e3cdbcd89f lualogging-1.6.0-1.src.rock -sha256 4d95b123e667a13615f567a829aa39211dd55b0b48c9f247bf3fcc5c0b485da7 lualogging/COPYRIGHT +sha256 d4a8791e9b24840c4a4c0366399f55b6deb060fc3947f3a9aae9ced0334160c1 lualogging-1.7.0-1.src.rock +sha256 d900082cb26f8cf4a491ca51c00241f2c2e9cd9ae3531c62234017a360706adb lualogging/COPYRIGHT diff --git a/package/lualogging/lualogging.mk b/package/lualogging/lualogging.mk index 4d01f546e9..78197f6be6 100644 --- a/package/lualogging/lualogging.mk +++ b/package/lualogging/lualogging.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUALOGGING_VERSION = 1.6.0-1 +LUALOGGING_VERSION = 1.7.0-1 LUALOGGING_SUBDIR = lualogging LUALOGGING_LICENSE = MIT LUALOGGING_LICENSE_FILES = $(LUALOGGING_SUBDIR)/COPYRIGHT From peter at korsgaard.com Sun Oct 16 15:01:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:53 +0200 Subject: [Buildroot] [git commit] package/lrzip: security bump to version 0.651 Message-ID: <20221016150425.3C9FD86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=edbdad93979ce8521653b4031235fd0fa9d438c9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. - Use official tarball and so drop autoreconf https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..0375696414 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,9 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) -LRZIP_AUTORECONF = YES +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING LRZIP_CPE_ID_VENDOR = long_range_zip_project From peter at korsgaard.com Sun Oct 16 15:00:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:23 +0200 Subject: [Buildroot] [git commit] package/gst1-python: bump version to 1.20.4 Message-ID: <20221016150425.1C6A986709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b7bd4cabed37d3ea827e7b8aabe0fa50a8effd4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-python/gst1-python.hash | 4 ++-- package/gstreamer1/gst1-python/gst1-python.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-python/gst1-python.hash b/package/gstreamer1/gst1-python/gst1-python.hash index 9501d94a97..adb116ac4c 100644 --- a/package/gstreamer1/gst1-python/gst1-python.hash +++ b/package/gstreamer1/gst1-python/gst1-python.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.3.tar.xz.sha256sum -sha256 db348120eae955b8cc4de3560a7ea06e36d6e1ddbaa99a7ad96b59846601cfdc gst-python-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.4.tar.xz.sha256sum +sha256 5eb4136d03e2a495f4499c8b2e6d9d3e7b5e73c5a8b8acf9213d57bc6a7bd3c1 gst-python-1.20.4.tar.xz sha256 ea3ad127610e5ded2210b3a86a46314f2b3b28e438eccffdae19a4d6fbcdb0c2 COPYING diff --git a/package/gstreamer1/gst1-python/gst1-python.mk b/package/gstreamer1/gst1-python/gst1-python.mk index 0fa1f661b8..feb2de718a 100644 --- a/package/gstreamer1/gst1-python/gst1-python.mk +++ b/package/gstreamer1/gst1-python/gst1-python.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PYTHON_VERSION = 1.20.3 +GST1_PYTHON_VERSION = 1.20.4 GST1_PYTHON_SOURCE = gst-python-$(GST1_PYTHON_VERSION).tar.xz GST1_PYTHON_SITE = https://gstreamer.freedesktop.org/src/gst-python GST1_PYTHON_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 15:06:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:06:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/agent-proxy: fix AGENT_PROXY_VERSION In-Reply-To: <20221014220417.7167-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:04:17 +0200") References: <20221014220417.7167-1-fontaine.fabrice@gmail.com> Message-ID: <87edv7byex.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Make AGENT_PROXY_VERSION compliant with release-monitoring.org > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:05:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:05:21 +0200 Subject: [Buildroot] [git commit] package/agent-proxy: fix AGENT_PROXY_VERSION Message-ID: <20221016150659.68BA686785@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e451f1a578d1629ac1e6cf1e61bc8fcead0910d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Make AGENT_PROXY_VERSION compliant with release-monitoring.org Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/agent-proxy/agent-proxy.hash | 2 +- package/agent-proxy/agent-proxy.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash index bd0e814d20..685dd4fbaf 100644 --- a/package/agent-proxy/agent-proxy.hash +++ b/package/agent-proxy/agent-proxy.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 b1667b36074c10ebd6dd1f89eda75d5877bc8e06ecf2919f18e75a7a5a9de19b agent-proxy-1.97.tar.gz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk index 46108aef02..c8844ccbf1 100644 --- a/package/agent-proxy/agent-proxy.mk +++ b/package/agent-proxy/agent-proxy.mk @@ -4,8 +4,8 @@ # ################################################################################ -AGENT_PROXY_VERSION = agent-proxy-1.97 -AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_VERSION = 1.97 +AGENT_PROXY_SITE = https://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git/snapshot AGENT_PROXY_LICENSE = GPL-2.0 AGENT_PROXY_LICENSE_FILES = COPYING From bernd.kuhls at t-online.de Sun Oct 16 15:20:34 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:20:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/ffmpeg: bump version to 4.4.3 Message-ID: <20221016152034.1161161-1-bernd.kuhls@t-online.de> Changelog: http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 Signed-off-by: Bernd Kuhls --- package/ffmpeg/ffmpeg.hash | 2 +- package/ffmpeg/ffmpeg.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ffmpeg/ffmpeg.hash b/package/ffmpeg/ffmpeg.hash index 8669a060d0..c9d7ea7c41 100644 --- a/package/ffmpeg/ffmpeg.hash +++ b/package/ffmpeg/ffmpeg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 af419a7f88adbc56c758ab19b4c708afbcae15ef09606b82b855291f6a6faa93 ffmpeg-4.4.2.tar.xz +sha256 6c5b6c195e61534766a0b5fe16acc919170c883362612816d0a1c7f4f947006e ffmpeg-4.4.3.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPLv2 sha256 b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe COPYING.LGPLv2.1 sha256 cb48bf09a11f5fb576cddb0431c8f5ed0a60157a9ec942adffc13907cbe083f2 LICENSE.md diff --git a/package/ffmpeg/ffmpeg.mk b/package/ffmpeg/ffmpeg.mk index ced5ce598f..136e3e24ca 100644 --- a/package/ffmpeg/ffmpeg.mk +++ b/package/ffmpeg/ffmpeg.mk @@ -4,7 +4,7 @@ # ################################################################################ -FFMPEG_VERSION = 4.4.2 +FFMPEG_VERSION = 4.4.3 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.xz FFMPEG_SITE = http://ffmpeg.org/releases FFMPEG_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:21:52 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:21:52 +0200 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme References: <20221016080629.3354482-1-clabbe__38958.9544081659$1665907620$gmane$org@baylibre.com> Message-ID: Am Sun, 16 Oct 2022 08:06:29 +0000 schrieb Corentin Labbe: > Current ffmpeg package does not install ffplay. > The root cause is that ffmpeg configure does not detect SDL2 due to > version mismatch. > The patch fixing that is taken from gentoo portage tree. Hi, this patch is also included in the new version: http://patchwork.ozlabs.org/project/buildroot/patch/ 20221016152034.1161161-1-bernd.kuhls at t-online.de/ Regards, Bernd From bernd.kuhls at t-online.de Sun Oct 16 15:29:38 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:29:38 +0200 Subject: [Buildroot] [PATCH 1/2] package/sofia-sip: bump version to 1.13.9 Message-ID: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/sofia-sip/sofia-sip.hash | 2 +- package/sofia-sip/sofia-sip.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sofia-sip/sofia-sip.hash b/package/sofia-sip/sofia-sip.hash index ae2b3e725c..776136bb15 100644 --- a/package/sofia-sip/sofia-sip.hash +++ b/package/sofia-sip/sofia-sip.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 ebd006a98a7dff6e7f4d8357c5ebeee1d3bee3ac29ff213a4909e845f230fcbe sofia-sip-1.13.8-756ab9b5c9.tar.gz +sha256 daf75c41408c559c2d58a8fd4d39be4a8ff5144bc1db220d4dbc28deeed6670a sofia-sip-1.13.9-f6ee306084.tar.gz sha256 e1c0890440efe31b6cd2ee2abf895eb917c787799f079133f5809414d90d5d60 COPYING sha256 b402ae58cf355b33be8fa023f704a039e3d41ecaccd2bbcda43ca31d703e4556 COPYRIGHTS diff --git a/package/sofia-sip/sofia-sip.mk b/package/sofia-sip/sofia-sip.mk index 80e59057c4..9071d964e4 100644 --- a/package/sofia-sip/sofia-sip.mk +++ b/package/sofia-sip/sofia-sip.mk @@ -4,8 +4,8 @@ # ################################################################################ -SOFIA_SIP_VERSION = 1.13.8 -SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-756ab9b5c9.tar.gz +SOFIA_SIP_VERSION = 1.13.9 +SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-f6ee306084.tar.gz SOFIA_SIP_SITE = https://files.freeswitch.org/downloads/libs/sofia-sip SOFIA_SIP_INSTALL_STAGING = YES SOFIA_SIP_DEPENDENCIES = host-pkgconf -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:29:39 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:29:39 +0200 Subject: [Buildroot] [PATCH 2/2] package/freeswitch: bump version to 1.10.8 In-Reply-To: <20221016152939.1162118-1-bernd.kuhls@t-online.de> References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Message-ID: <20221016152939.1162118-2-bernd.kuhls@t-online.de> Release notes: https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 Removed two patches which are included in upstream release, renumbered remaining patch. Removed libs/apr-util/LICENSE due to upstream removal of bundled apr-util package. Added fix to disable pcap detection, otherwise /usr/bin/pcap-config can be picked-up which breaks building freeswitch. Signed-off-by: Bernd Kuhls --- ...build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch | 26 ---- ...hash-hmac_ossl.c-fix-build-with-lib.patch} | 0 .../0002-core-fix--disable-libyuv.patch | 129 ------------------ package/freeswitch/freeswitch.hash | 5 +- package/freeswitch/freeswitch.mk | 9 +- 5 files changed, 8 insertions(+), 161 deletions(-) delete mode 100644 package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch rename package/freeswitch/{0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch => 0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch} (100%) delete mode 100644 package/freeswitch/0002-core-fix--disable-libyuv.patch diff --git a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch b/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch deleted file mode 100644 index 57f6e660c1..0000000000 --- a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 68039d344d8e826e8b403c9cd0284fd07b4495ac Mon Sep 17 00:00:00 2001 -From: Dragos Oancea -Date: Tue, 26 Oct 2021 08:42:58 +0000 -Subject: [PATCH] [core] fix build SWITCH_BYTE_ORDER == __BIG_ENDIAN - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/68039d344d8e826e8b403c9cd0284fd07b4495ac - -Signed-off-by: Bernd Kuhls ---- - src/switch_rtp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/switch_rtp.c b/src/switch_rtp.c -index 1880bbb19c..843ee81381 100644 ---- a/src/switch_rtp.c -+++ b/src/switch_rtp.c -@@ -2155,7 +2155,7 @@ static void switch_send_rtcp_event(switch_rtp_t *rtp_session ,struct switch_rtcp - switch_event_add_header_string(event, SWITCH_STACK_BOTTOM, header, value); - snprintf(header, sizeof(header), "Source-Lost"); - #if SWITCH_BYTE_ORDER == __BIG_ENDIAN -- tmpLost = report->lost; /* signed 24bit will extended signess to int32_t automatically */ -+ tmpLost = rtcp_report_block->lost; /* signed 24bit will extended signess to int32_t automatically */ - #else - tmpLost = ntohl(rtcp_report_block->lost)>>8; - tmpLost = tmpLost | ((tmpLost & 0x00800000) ? 0xff000000 : 0x00000000); /* ...and signess compensation */ diff --git a/package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch b/package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch similarity index 100% rename from package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch rename to package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch diff --git a/package/freeswitch/0002-core-fix--disable-libyuv.patch b/package/freeswitch/0002-core-fix--disable-libyuv.patch deleted file mode 100644 index 137cb27cf8..0000000000 --- a/package/freeswitch/0002-core-fix--disable-libyuv.patch +++ /dev/null @@ -1,129 +0,0 @@ -From a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 Mon Sep 17 00:00:00 2001 -From: Sebastian Kemper -Date: Mon, 1 Nov 2021 09:59:09 +0100 -Subject: [PATCH] [core] fix "--disable-libyuv" - -Recent changes made it impossible to compile freeswitch without libyuv -support. - -src/switch_core_video.c: In function 'switch_img_read_from_file': -src/switch_core_video.c:3139:4: error: implicit declaration of function 'RAWToI420' [-Werror=implicit-function-declaration] -RAWToI420(data, width * 3, -^ -src/switch_core_video.c:3148:4: error: implicit declaration of function 'ABGRToARGB' [-Werror=implicit-function-declaration] -ABGRToARGB(data, width * 4, img->planes[SWITCH_PLANE_PACKED], img->stride[SWITCH_PLANE_PACKED], width, height); -^ - -Fix this my adding/moving the checks for "SWITCH_HAVE_YUV". - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 - -Signed-off-by: Bernd Kuhls -Signed-off-by: Sebastian Kemper ---- - src/switch_core_video.c | 12 ++++++++++++ - tests/unit/switch_core_video.c | 4 ++++ - 2 files changed, 16 insertions(+) - -diff --git a/src/switch_core_video.c b/src/switch_core_video.c -index 7dbd685d6ee..0d377f9c3e4 100644 ---- a/src/switch_core_video.c -+++ b/src/switch_core_video.c -@@ -3116,6 +3116,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url_png(switch_image_t *img, cha - - SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name, switch_img_fmt_t img_fmt) - { -+#ifdef SWITCH_HAVE_YUV - int width = 0, height = 0, channels = 0; - int comp = STBI_rgb; - unsigned char *data = NULL; -@@ -3155,12 +3156,16 @@ SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name - } else if (data) { - stbi_image_free(data); - } -+#endif - - return NULL; - } - - SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, const char* file_name, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - const char *ext = strrchr(file_name, '.'); -@@ -3217,6 +3222,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, co - free(data); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif - } - - typedef struct data_url_context_s { -@@ -3224,14 +3230,19 @@ typedef struct data_url_context_s { - char **urlP; - } data_url_context_t; - -+#ifdef SWITCH_HAVE_YUV - static void data_url_write_func(void *context, void *data, int size) - { - switch_buffer_t *buffer = (switch_buffer_t *)context; - switch_buffer_write(buffer, data, size); - } -+#endif - - SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char **urlP, const char *type, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - int stride_in_bytes = 0; -@@ -3300,6 +3311,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char ** - switch_buffer_destroy(&buffer); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif /* SWITCH_HAVE_YUV */ - } - - -diff --git a/tests/unit/switch_core_video.c b/tests/unit/switch_core_video.c -index 27c96102929..e395db474d5 100644 ---- a/tests/unit/switch_core_video.c -+++ b/tests/unit/switch_core_video.c -@@ -48,6 +48,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEARDOWN_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(data_url_test) - { - char *data_url = NULL; -@@ -88,6 +89,7 @@ FST_CORE_BEGIN("./conf") - unlink(argb_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - - FST_TEST_BEGIN(img_patch) - { -@@ -239,6 +241,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEST_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(stb_data_url) - { - switch_image_t *img = switch_img_alloc(NULL, SWITCH_IMG_FMT_I420, 120, 60, 1); -@@ -321,6 +324,7 @@ FST_CORE_BEGIN("./conf") - unlink(jpg_write_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - } - FST_SUITE_END() - } diff --git a/package/freeswitch/freeswitch.hash b/package/freeswitch/freeswitch.hash index 8066c620c4..18a36ff23c 100644 --- a/package/freeswitch/freeswitch.hash +++ b/package/freeswitch/freeswitch.hash @@ -1,10 +1,9 @@ -# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.7.-release.tar.xz.sha256 -sha256 0919bddc2ea9cab2e4944314e71637bea9dd4f40d510722a74ea032104594c41 freeswitch-1.10.7.-release.tar.xz +# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.8.-release.tar.xz.sha256 +sha256 1176b26b2f463de2980e5be953f81ced94d23c784452bd41e086d3933a88be5f freeswitch-1.10.8.-release.tar.xz # Locally computed sha256 75c933202f40939cdc3827fce20a1efdaa38291e2b5a65d234eb16e2cffda66a COPYING sha256 c3e3388768dae8bf4edcc4108f95be815b8a05c0b0aef6e4c3d8df81affdfa34 docs/OPENH264_BINARY_LICENSE.txt sha256 e8e26b16da14aa3e6ed5c22c705fdc1f45d6225fca461ea9f7314bcdfdc414c4 libs/apr/LICENSE -sha256 1eefb2ea1db0af7729a9d8a27d7c65d8a37ab185393f935b029aac6828ce315a libs/apr-util/LICENSE sha256 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615 libs/libvpx/LICENSE sha256 2b2cc1180c7e6988328ad2033b04b80117419db9c4c584918bbb3cfec7e9364f libs/libyuv/LICENSE sha256 7d72a8aee2c4b1a084200487992a5d86f5df6b535727a14c1874918e99d24600 libs/libzrtp/src/zrtp_legal.c diff --git a/package/freeswitch/freeswitch.mk b/package/freeswitch/freeswitch.mk index 24c1ee4dd4..6234dd8e97 100644 --- a/package/freeswitch/freeswitch.mk +++ b/package/freeswitch/freeswitch.mk @@ -4,20 +4,19 @@ # ################################################################################ -FREESWITCH_VERSION = 1.10.7 +FREESWITCH_VERSION = 1.10.8 FREESWITCH_SOURCE = freeswitch-$(FREESWITCH_VERSION).-release.tar.xz FREESWITCH_SITE = https://files.freeswitch.org/freeswitch-releases # External modules need headers/libs from staging FREESWITCH_INSTALL_STAGING = YES FREESWITCH_LICENSE = MPL-1.1, \ GPL-3.0+ with font exception (fonts), \ - Apache-2.0 (apr, apr-util), \ + Apache-2.0 (apr), \ BSD-3-Clause (libsrtp) FREESWITCH_LICENSE_FILES = \ COPYING \ libs/apr/LICENSE \ - libs/apr-util/LICENSE \ libs/srtp/LICENSE FREESWITCH_CPE_ID_VENDOR = freeswitch @@ -50,6 +49,10 @@ FREESWITCH_CONF_ENV += \ ac_cv_prog_PHP_CONFIG=false \ ac_cv_have_php_config=no +# disable pcap detection, pcap is an optional dependency for unit tests +FREESWITCH_CONF_ENV += \ + ac_cv_prog_HAVE_PCAP_CONFIG=false + # copied from freeswitch/configure.ac, line 258+ FREESWITCH_CONF_ENV += \ ac_cv_file__dev_ptmx=yes \ -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:30:50 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:30:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix Message-ID: <20221016153050.1163862-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash | 2 +- package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash index a24a7abcd8..c1d3b476b9 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3126ce811e03ac92363a4e399b908336bb54328b7fa0d42c25ac85b2fe5aa7d4 kodi-pvr-zattoo-19.7.15-Matrix.tar.gz +sha256 ac09db721e51b47f1ca7f4c2201833dbcd69040fd19b09c194fa7491ff4dad41 kodi-pvr-zattoo-19.7.16-Matrix.tar.gz sha256 310782e1abd43c4de6217c513e328bddf999d39302d67c6e05b10a59959827af LICENSE.md diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk index 559dbf884b..49b33916ee 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk @@ -4,7 +4,7 @@ # ################################################################################ -KODI_PVR_ZATTOO_VERSION = 19.7.15-Matrix +KODI_PVR_ZATTOO_VERSION = 19.7.16-Matrix KODI_PVR_ZATTOO_SITE = $(call github,rbuehlma,pvr.zattoo,$(KODI_PVR_ZATTOO_VERSION)) KODI_PVR_ZATTOO_LICENSE = GPL-2.0+ KODI_PVR_ZATTOO_LICENSE_FILES = LICENSE.md -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:41:47 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:41:47 +0200 Subject: [Buildroot] [PATCH 1/2] package/libva: bump version to 2.16.0 Message-ID: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d Signed-off-by: Bernd Kuhls --- package/libva/libva.hash | 6 +++--- package/libva/libva.mk | 3 +-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/package/libva/libva.hash b/package/libva/libva.hash index ecca9271cc..2916898c31 100644 --- a/package/libva/libva.hash +++ b/package/libva/libva.hash @@ -1,5 +1,5 @@ -# From https://github.com/intel/libva/releases/download/2.15.0/libva-2.15.0.tar.bz2.sha1sum -sha1 b4fca8600961336b246e80552f9b0278c187051b libva-2.15.0.tar.bz2 +# From https://github.com/intel/libva/releases/download/2.16.0/libva-2.16.0.tar.bz2.sha1sum +sha1 ba1c0e196d69a26e54b065dc0f645bdf3be147a7 libva-2.16.0.tar.bz2 # Locally computed -sha256 258ed409458d3e7a000e1908bc852619615ee6a933359c745fcd93eb3e461eca libva-2.15.0.tar.bz2 +sha256 115faca0db2c417a37da49830870e260450fa13066f5e24e252a20c36d920a1c libva-2.16.0.tar.bz2 sha256 c86a782ee845b52472dae9b9d79fb915d333628ac0efe49cdce63644814931de COPYING diff --git a/package/libva/libva.mk b/package/libva/libva.mk index 4138daf8b4..3b6e9580d3 100644 --- a/package/libva/libva.mk +++ b/package/libva/libva.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_VERSION = 2.15.0 +LIBVA_VERSION = 2.16.0 LIBVA_SOURCE = libva-$(LIBVA_VERSION).tar.bz2 LIBVA_SITE = https://github.com/intel/libva/releases/download/$(LIBVA_VERSION) LIBVA_LICENSE = MIT @@ -30,7 +30,6 @@ endif ifeq ($(BR2_PACKAGE_WAYLAND),y) LIBVA_DEPENDENCIES += wayland -LIBVA_CONF_ENV += ac_cv_path_WAYLAND_SCANNER=$(HOST_DIR)/bin/wayland-scanner LIBVA_CONF_OPTS += --enable-wayland else LIBVA_CONF_OPTS += --disable-wayland -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:41:48 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:41:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/libva-utils: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-1-bernd.kuhls@t-online.de> References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Message-ID: <20221016154148.1254457-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/libva-utils/libva-utils.hash | 2 +- package/libva-utils/libva-utils.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libva-utils/libva-utils.hash b/package/libva-utils/libva-utils.hash index 3ff6a488fb..95bcee782b 100644 --- a/package/libva-utils/libva-utils.hash +++ b/package/libva-utils/libva-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 73609a24fe1dbf99e1472e20af1398d910f64c88b8615272f9f3539ffc5d2efc libva-utils-2.15.0.tar.gz +sha256 646c9bfff6a83504c48de2c786c9514ca30c5e916127faf00f143ef8147ee950 libva-utils-2.16.0.tar.gz sha256 c6220c9f87832c27abcb8a32eafdd2823e13ce146b3ea63d5deae2a76798ef50 COPYING diff --git a/package/libva-utils/libva-utils.mk b/package/libva-utils/libva-utils.mk index 0d6a3c062e..5feaa36995 100644 --- a/package/libva-utils/libva-utils.mk +++ b/package/libva-utils/libva-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_UTILS_VERSION = 2.15.0 +LIBVA_UTILS_VERSION = 2.16.0 LIBVA_UTILS_SITE = $(call github,intel,libva-utils,$(LIBVA_UTILS_VERSION)) LIBVA_UTILS_LICENSE = MIT LIBVA_UTILS_LICENSE_FILES = COPYING -- 2.30.2 From james.hilliard1 at gmail.com Sun Oct 16 15:44:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 11:44:19 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221016075056.GI2503@scaer> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > James, All, > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > > On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine > > wrote: > > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > > >> The bearssl package is not compatible with parallel builds. > > > bearssl was building perfectly fine up until now and it seems there > > > are a lot of packages that are affected by parallel build issues > > > (e.g. dmraid, musepack, slang, etc). > > > > Some parallel build bugs don't reproduce reliably due to timing, I made a change > > to my autobuilders which massively increases the chance of triggering > > build failures > > in packages which have dependency graph bugs. This triggers build build failures > > in -j1 builds which would otherwise only appear when running parallel builds(my > > autobuilders are generally running with -j1 to make the logs more readable). > > > > > Did we change something recently on the autobuilders? > > > > Yes, all my autobuilders were recently changed to use make master(will be > > make version 4.4 once released) with top level --shuffle=random. > > By disabling parallel build because you are using ana as yet unreleased > version, we remove the parallel build for everyone, which is not very > nice at all. Failures with shuffle mode indicate that the package is not parallel compatible on existing make releases as well, it just makes those bugs more visible. I'm running shuffle with -j1 because that way it's obvious in the logs where the failure is getting hit, otherwise these bugs tend to be transient and difficult to trace as they otherwise are timing dependent. > > Instead, we should really try and fix the packages rather than papering > over the issue. > > Notes: > - it *is* interesting to find those bugs; > - it is sad that the default mode for --shuffle will be random, not > none. Default is equivalent to none, I modified my autobuilder runner to pass --shuffle=random. > > Regards, > Yann E. MORIN. > > > Details: > > https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 > > https://trofi.github.io/posts/238-new-make-shuffle-mode.html > > http://trofi.github.io/posts/249-an-update-on-make-shuffle.html > > > > Note that MAKE1 is currently broken itself without this when using shuffle mode: > > https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > > > > > > >> > > >> > > >> Fixes: > > >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > >> > > >> Signed-off-by: James Hilliard > > >> --- > > >> package/bearssl/bearssl.mk | 2 +- > > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > >> > > >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > > >> index ff5f4e87b7..c2a5760af5 100644 > > >> --- a/package/bearssl/bearssl.mk > > >> +++ b/package/bearssl/bearssl.mk > > >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > > >> endif > > >> > > >> define BEARSSL_BUILD_CMDS > > >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > > >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > > >> $(BEARSSL_TARGETS) > > >> endef > > >> > > >> -- > > >> 2.34.1 > > >> > > > Best Regards, > > > > > > Fabrice > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 16 15:46:46 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:46 +0200 Subject: [Buildroot] [PATCH 3/3] package/intel-mediasdk: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <20221016154646.1257569-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index a770551875..25894aea63 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 078fc882d97273754cee9bf9cab6b4d4fb3bb087765867a76f2f2b2817e3d747 intel-mediasdk-22.5.3.tar.gz +sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index aea0cac014..4080188dc5 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.3 +INTEL_MEDIASDK_VERSION = 22.5.4 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:46:45 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:45 +0200 Subject: [Buildroot] [PATCH 2/3] package/intel-mediadriver: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <20221016154646.1257569-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 949c9d5f66..35e4c97c7c 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 65652b365d48be3c9f0b3c561502952b92ee5fcc587520b88d0d752cf2a6a3b5 intel-media-22.5.3.tar.gz +sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index d6bb8bc9a6..c2d480fa21 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.3 +INTEL_MEDIADRIVER_VERSION = 22.5.4 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:46:44 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:44 +0200 Subject: [Buildroot] [PATCH 1/3] package/intel-gmmlib: bump version to 22.2.1 Message-ID: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-gmmlib/intel-gmmlib.hash | 2 +- package/intel-gmmlib/intel-gmmlib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-gmmlib/intel-gmmlib.hash b/package/intel-gmmlib/intel-gmmlib.hash index 9509796850..bfff5e4b82 100644 --- a/package/intel-gmmlib/intel-gmmlib.hash +++ b/package/intel-gmmlib/intel-gmmlib.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0b2253894c6fc8455b6d7c5e87e6504a76d6f60ea192e1445c2f93164bf529c0 intel-gmmlib-22.2.0.tar.gz +sha256 363084a52db1557f6e7409278c8ce46a66fcafa2b4672e399c452501a60b4437 intel-gmmlib-22.2.1.tar.gz sha256 8b7446825df3f8b0268307e272aa6aaaf78351c83161d860d02c913c22666c48 LICENSE.md diff --git a/package/intel-gmmlib/intel-gmmlib.mk b/package/intel-gmmlib/intel-gmmlib.mk index 6fec276205..e949176cf7 100644 --- a/package/intel-gmmlib/intel-gmmlib.mk +++ b/package/intel-gmmlib/intel-gmmlib.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_GMMLIB_VERSION = 22.2.0 +INTEL_GMMLIB_VERSION = 22.2.1 INTEL_GMMLIB_SITE = https://github.com/intel/gmmlib/archive INTEL_GMMLIB_LICENSE = MIT INTEL_GMMLIB_LICENSE_FILES = LICENSE.md -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:52:52 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:52:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 Message-ID: <20221016155252.1723048-1-bernd.kuhls@t-online.de> Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: http://bugs.php.net/81727 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 5fb373ec11..c4c42a2c7d 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 53477e73e6254dc942b68913a58d815ffdbf6946baf61a1f8ef854de524c27bf php-8.1.9.tar.xz +sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 77584813c3..7136fd9744 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.9 +PHP_VERSION = 8.1.11 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:55:26 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:55:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.1 Message-ID: <20221016155526.1724052-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- package/mesa3d/mesa3d.hash | 6 +++--- package/mesa3d/mesa3d.mk | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index bf72937a66..78341e52f8 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.2.0 +MESA3D_HEADERS_VERSION = 22.2.1 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index 449fc58818..2800a46fb9 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html -sha256 b1f9c8fd08f2cae3adf83355bef4d2398e8025f44947332880f2d0066bdafa8c mesa-22.2.0.tar.xz -sha512 13a21b9ed6b0a5dfd0293b73df271a929c3155d83e8beb3d958fe18d79277f3611bf5b26a1186d446f4e1479a36bb13d0a13d6ac68937989fe7a0d917e12171e mesa-22.2.0.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html +sha256 0079beac0a33f45e7e0aec59e6913eafbc4268a3f1e2e330017440494f91b13c mesa-22.2.1.tar.xz +sha512 cb69c808453474f77aad68afae7cdb427e6720e1d2259f7b911a5476a03144bbe8adfbe040f9bed3954d92805eea302757b76fd29f03f692f725c0fd2295df7e mesa-22.2.1.tar.xz # License sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 69ddcc38ea..352fd1fc4b 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.2.0 +MESA3D_VERSION = 22.2.1 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From yann.morin.1998 at free.fr Sun Oct 16 16:05:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:05:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> Message-ID: <20221016160505.GK2503@scaer> James, All, +Thomas, Peter, Arnout On 2022-10-16 11:44 -0400, James Hilliard spake thusly: > On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: [--SNIP--] > > > Yes, all my autobuilders were recently changed to use make master(will be > > > make version 4.4 once released) with top level --shuffle=random. > > By disabling parallel build because you are using ana as yet unreleased > > version, we remove the parallel build for everyone, which is not very > > nice at all. > Failures with shuffle mode indicate that the package is not parallel compatible > on existing make releases as well, it just makes those bugs more visible. I never said they were not, and I even said (further on) that it *is* interesting to find such bugs. However, the behaviour so far has been ordering of prerequisites (and goals!), and for some packages, that ordering was enough to work in a parallel make. For example, the bearsll parallel issue is caused by the ordering so the mkdir is very early. Yes, it is incorrect, but it happens to always work in practice. And yes it is easy to fix, here's a patch: diff -durN a/mk/mkrules.sh b/mk/mkrules.sh --- a/mk/mkrules.sh 2018-08-14 22:41:54.000000000 +0200 +++ b/mk/mkrules.sh 2022-10-16 17:54:22.282069851 +0200 @@ -531,23 +531,23 @@ (for f in $coresrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $toolssrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $testcryptosrc $testspeedsrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $testx509src ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done) >> Rules.mk Binary files a/mk/.mkrules.sh.swp and b/mk/.mkrules.sh.swp differ And then adding a CONFIGURE_CMDS that runs mk/mkrules.sh to regenerate the Makefile. > I'm running shuffle with -j1 because that way it's obvious in the logs where the > failure is getting hit, otherwise these bugs tend to be transient and > difficult to > trace as they otherwise are timing dependent. Yes, this is very interesting to find such bugs, but disabling parallel build in packages is not nice when they can be (easily) fixed. > > Notes: > > - it *is* interesting to find those bugs; > > - it is sad that the default mode for --shuffle will be random, not > > none. > Default is equivalent to none, Yeah, I noticed the hard way after having my patch rejected in makem as you may have noticed. :-/ > I modified my autobuilder runner to pass > --shuffle=random. Again, that is very interesting, but please, please, conordinate with the rest of us when you do such changes, because that is very weird, as Fabrice noted, to suddenly get build failures out of the blue when nothing seemed to have otherwise changed. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 16 16:26:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:26:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221015005611.4054933-1-james.hilliard1@gmail.com> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> Message-ID: <20221016162654.GL2503@scaer> James, All, On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > Make 4.4 introduces a shuffle mode which randomizes prerequisites > in order to better flush out issues with parallel builds, as this > mode randomizes prerequisites even when using -j1 builds we must > instead explicitely mark parallel incompatible builds using the > .NOTPARALLEL special target which disables prerequisites > randomization when running in shuffle mode. > > Signed-off-by: James Hilliard > --- > package/Makefile.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/Makefile.in b/package/Makefile.in > index 43d214bcbe..2327849a1f 100644 > --- a/package/Makefile.in > +++ b/package/Makefile.in > @@ -17,7 +17,7 @@ else > PARALLEL_JOBS := $(BR2_JLEVEL) > endif > > -MAKE1 := $(HOSTMAKE) -j1 > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: Packages that do not build in parallel do not because their rules assume the ordering is kept. I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the ordering to be restored. Instead, I would have expected we do something like: # Only build one job at a time, *and* to not randomise goals and # prerequisites ordering in make 4.4+ MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) Regards, Yann E. MORIN. > override MAKE = $(HOSTMAKE) \ > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 16 16:35:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:35:43 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016162654.GL2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> Message-ID: <20221016163543.GM2503@scaer> On 2022-10-16 18:26 +0200, Yann E. MORIN spake thusly: > James, All, > > On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > > Make 4.4 introduces a shuffle mode which randomizes prerequisites > > in order to better flush out issues with parallel builds, as this > > mode randomizes prerequisites even when using -j1 builds we must > > instead explicitely mark parallel incompatible builds using the > > .NOTPARALLEL special target which disables prerequisites > > randomization when running in shuffle mode. > > > > Signed-off-by: James Hilliard > > --- > > package/Makefile.in | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/package/Makefile.in b/package/Makefile.in > > index 43d214bcbe..2327849a1f 100644 > > --- a/package/Makefile.in > > +++ b/package/Makefile.in > > @@ -17,7 +17,7 @@ else > > PARALLEL_JOBS := $(BR2_JLEVEL) > > endif > > > > -MAKE1 := $(HOSTMAKE) -j1 > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > Packages that do not build in parallel do not because their rules assume > the ordering is kept. > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > ordering to be restored. Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and reading .texi source is not my main ability). Still, I think my proposal is better, because it is more explicit. Regards, Yann E. MORIN. > Instead, I would have expected we do something like: > > # Only build one job at a time, *and* to not randomise goals and > # prerequisites ordering in make 4.4+ > MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) > > Regards, > Yann E. MORIN. > > > override MAKE = $(HOSTMAKE) \ > > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 16:45:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 12:45:06 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221016160505.GK2503@scaer> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 12:05 PM Yann E. MORIN wrote: > > James, All, > > +Thomas, Peter, Arnout > > On 2022-10-16 11:44 -0400, James Hilliard spake thusly: > > On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > [--SNIP--] > > > > Yes, all my autobuilders were recently changed to use make master(will be > > > > make version 4.4 once released) with top level --shuffle=random. > > > By disabling parallel build because you are using ana as yet unreleased > > > version, we remove the parallel build for everyone, which is not very > > > nice at all. > > Failures with shuffle mode indicate that the package is not parallel compatible > > on existing make releases as well, it just makes those bugs more visible. > > I never said they were not, and I even said (further on) that it *is* > interesting to find such bugs. > > However, the behaviour so far has been ordering of prerequisites (and > goals!), and for some packages, that ordering was enough to work in a > parallel make. > > For example, the bearsll parallel issue is caused by the ordering so > the mkdir is very early. Yes, it is incorrect, but it happens to always > work in practice. And yes it is easy to fix, here's a patch: Yeah, I think a lot of these are bugs that usually don't appear most of the time but may randomly pop up under high load highly parallel conditions. Randomly failing parallel builds has been an issue I've seen pop up a good bit for my project builds so I wanted to try and find a way to make them more visible. > > diff -durN a/mk/mkrules.sh b/mk/mkrules.sh > --- a/mk/mkrules.sh 2018-08-14 22:41:54.000000000 +0200 > +++ b/mk/mkrules.sh 2022-10-16 17:54:22.282069851 +0200 > @@ -531,23 +531,23 @@ > (for f in $coresrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $toolssrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $testcryptosrc $testspeedsrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $testx509src ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done) >> Rules.mk > Binary files a/mk/.mkrules.sh.swp and b/mk/.mkrules.sh.swp differ > > And then adding a CONFIGURE_CMDS that runs mk/mkrules.sh to regenerate > the Makefile. > > > I'm running shuffle with -j1 because that way it's obvious in the logs where the > > failure is getting hit, otherwise these bugs tend to be transient and > > difficult to > > trace as they otherwise are timing dependent. > > Yes, this is very interesting to find such bugs, but disabling parallel > build in packages is not nice when they can be (easily) fixed. Yeah, I hadn't investigated the root cause in detail as bearssl didn't appear to be very widely used. At least with per-package directories disabling parallel build for an individual package shouldn't meaningfully slow down the build in most cases AFAIU. I agree fixing the root cause is ideal, I thought our typical approach was to just mark parallel incompatible stuff with MAKE1 and then fix things later on as needed. If a lot of packages have dependency ordering issues I assume we would want to prioritise fixing popular packages that have long build times first. What do you think the best strategy there would be? > > > > Notes: > > > - it *is* interesting to find those bugs; > > > - it is sad that the default mode for --shuffle will be random, not > > > none. > > Default is equivalent to none, > > Yeah, I noticed the hard way after having my patch rejected in makem as > you may have noticed. :-/ > > > I modified my autobuilder runner to pass > > --shuffle=random. > > Again, that is very interesting, but please, please, conordinate with > the rest of us when you do such changes, because that is very weird, as > Fabrice noted, to suddenly get build failures out of the blue when > nothing seemed to have otherwise changed. I've been experimenting a bit in general with autobuilder settings to try and fix some issues with poor coverage. One other reason for testing with shuffle=random is to make higher kconfig probability values more useful(as otherwise build failures will be concentrated in packages early in the dependency ordering) : https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 16:53:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 12:53:06 -0400 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016163543.GM2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: > > On 2022-10-16 18:26 +0200, Yann E. MORIN spake thusly: > > James, All, > > > > On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > > > Make 4.4 introduces a shuffle mode which randomizes prerequisites > > > in order to better flush out issues with parallel builds, as this > > > mode randomizes prerequisites even when using -j1 builds we must > > > instead explicitely mark parallel incompatible builds using the > > > .NOTPARALLEL special target which disables prerequisites > > > randomization when running in shuffle mode. > > > > > > Signed-off-by: James Hilliard > > > --- > > > package/Makefile.in | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/package/Makefile.in b/package/Makefile.in > > > index 43d214bcbe..2327849a1f 100644 > > > --- a/package/Makefile.in > > > +++ b/package/Makefile.in > > > @@ -17,7 +17,7 @@ else > > > PARALLEL_JOBS := $(BR2_JLEVEL) > > > endif > > > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > Packages that do not build in parallel do not because their rules assume > > the ordering is kept. > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > ordering to be restored. > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > reading .texi source is not my main ability). > > Still, I think my proposal is better, because it is more explicit. We don't want to modify the shuffle value as it's useful for reproducing failures, although there's currently a bug which doesn't set the seed correctly: https://savannah.gnu.org/bugs/index.php?63215 Using .NOTPARALLEL should ensure the shuffle value is still passed down so that it appears in the failure message(once that bug is fixed) while still disabling parallel build for the parallel incompatible package. We want to be able to reproduce failures by passing the shuffle seed to the top level make invocation. > > Regards, > Yann E. MORIN. > > > Instead, I would have expected we do something like: > > > > # Only build one job at a time, *and* to not randomise goals and > > # prerequisites ordering in make 4.4+ > > MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) > > > > Regards, > > Yann E. MORIN. > > > > > override MAKE = $(HOSTMAKE) \ > > > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > > > > > -- > > > 2.34.1 > > > > > > _______________________________________________ > > > buildroot mailing list > > > buildroot at buildroot.org > > > https://lists.buildroot.org/mailman/listinfo/buildroot > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > '------------------------------^-------^------------------^--------------------' > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 17:12:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 11:12:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/pipewire: bump to version 0.3.59 Message-ID: <20221016171257.1278757-1-james.hilliard1@gmail.com> Disable new unsupported bluez5-codec-lc3 feature. Signed-off-by: James Hilliard --- package/pipewire/pipewire.hash | 2 +- package/pipewire/pipewire.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/pipewire/pipewire.hash b/package/pipewire/pipewire.hash index 21c3119945..9bead47bd9 100644 --- a/package/pipewire/pipewire.hash +++ b/package/pipewire/pipewire.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 da1fd2e6ee088aa22f5398caca76ff879e398ec9216fb6b9400c1177b8c68115 pipewire-0.3.57.tar.bz2 +sha256 32a6db3f42f00eb95a07369160a614420443ca4f4e90ac628db8ca508e08538e pipewire-0.3.59.tar.bz2 sha256 8909c319a7e27dbb33a15b9035f89ab3b7b2f6a12f8bcddc755206a8db1ada44 COPYING sha256 be4be5d77424833edf31f53fc1f1cecb6996b9e2d747d9e6fb8f878362ebc92b LICENSE diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk index 1aad4a3c5c..d7ae07170d 100644 --- a/package/pipewire/pipewire.mk +++ b/package/pipewire/pipewire.mk @@ -4,7 +4,7 @@ # ################################################################################ -PIPEWIRE_VERSION = 0.3.57 +PIPEWIRE_VERSION = 0.3.59 PIPEWIRE_SOURCE = pipewire-$(PIPEWIRE_VERSION).tar.bz2 PIPEWIRE_SITE = https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION) PIPEWIRE_LICENSE = MIT, LGPL-2.1+ (libspa-alsa), GPL-2.0 (libjackserver) @@ -20,6 +20,7 @@ PIPEWIRE_CONF_OPTS += \ -Dspa-plugins=enabled \ -Daudiomixer=enabled \ -Daudioconvert=enabled \ + -Dbluez5-codec-lc3=disabled \ -Dbluez5-codec-lc3plus=disabled \ -Dcontrol=enabled \ -Daudiotestsrc=enabled \ -- 2.34.1 From angelo at amarulasolutions.com Sun Oct 16 17:22:41 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 16 Oct 2022 19:22:41 +0200 Subject: [Buildroot] [PATCH v2] package/cutekeyboard: new package Message-ID: <20221016172241.17083-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 40 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..389c583313 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..4720d7ec40 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f cutekeyboard-v1.0.1.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..b43595075a --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# cutekeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = v1.0.1 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.34.1 From angelo at amarulasolutions.com Sun Oct 16 17:50:25 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 16 Oct 2022 19:50:25 +0200 Subject: [Buildroot] [PATCH v3] package/cutekeyboard: new package Message-ID: <20221016175025.22545-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- v2: * bump to verison v1.0.1 v3: * Adding me to developers file DEVELOPERS | 1 + package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 5 files changed, 41 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..4640abe3b2 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -158,6 +158,7 @@ F: package/apparmor/ F: package/corkscrew/ F: package/cups/ F: package/cups-filters/ +F: package/cutekeyboard/ F: package/fail2ban/ F: package/grep/ F: package/htpdate/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..389c583313 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..4720d7ec40 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f cutekeyboard-v1.0.1.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..b43595075a --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# cutekeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = v1.0.1 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 16 18:46:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 20:46:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> Message-ID: <20221016184607.GN2503@scaer> James, All, On 2022-10-16 12:53 -0400, James Hilliard spake thusly: > On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: [--SNIP--] > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > > > Packages that do not build in parallel do not because their rules assume > > > the ordering is kept. > > > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > > ordering to be restored. > > > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > > reading .texi source is not my main ability). > > > > Still, I think my proposal is better, because it is more explicit. > > We don't want to modify the shuffle value In this case, yes, we do want to disable shuffling. Packages that do not build in parallel, do not exactly because of the build ordering. So far, we resorted to just forcing -j1 for those packages, because -j1 hid away the build order issue. So, shuffling them even in -j1, would cause build failures. And as you said, and as the make manual states, .NOTPARALLEL disables shuffling. I.e., technically, those two lines are equivalent (assuming make 4.4): MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: MAKE1 := $(HOSTMAKE) -j1 --shuffle=none Except the latter is explicit about its goals: single job and no shuffling, while the former is only explicit about not parallel (also I do not like that --eval, it feels horribly weird, especially with the trailing colon). What I am saying, is that I prefer we explicitly disable shuffling, rather than rely on the implicit behaviour of .NOTPARALLEL. Finally, my proposal only appends --shuffle=none if it finds --shuffle in MAKEFLAGS. If it is not present, we do not need it, either because we are make 4.3-or-earlier, or we are make 4.4 without shuffling. > as it's useful for > reproducing failures, This is irrelevant to set MAKE1, because with MAKE1 we know the build ordering matters, and that we explicitly state that we do not want to be bothered by it. > although there's currently a bug which doesn't set the seed correctly: > https://savannah.gnu.org/bugs/index.php?63215 > > Using .NOTPARALLEL should ensure the shuffle value is still passed down Sorry, but .NOTPARALLEL disables shuffling, so I am lost: why would it matter to have the seed passed down? > so that it appears in the failure message(once that bug is fixed) while > still disabling parallel build for the parallel incompatible package. Parallel-incompatible packages are incompatible exactly because the build ordering does matter to them, so we do not want to shuffle them. > We want to be able to reproduce failures by passing the shuffle seed to the > top level make invocation. This is about debugging our dependency issues, not about the packages' Makefiles. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 19:18:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 15:18:52 -0400 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016184607.GN2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> <20221016184607.GN2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 2:46 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-16 12:53 -0400, James Hilliard spake thusly: > > On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: > [--SNIP--] > > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > > > > > Packages that do not build in parallel do not because their rules assume > > > > the ordering is kept. > > > > > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > > > ordering to be restored. > > > > > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > > > reading .texi source is not my main ability). > > > > > > Still, I think my proposal is better, because it is more explicit. > > > > We don't want to modify the shuffle value > > In this case, yes, we do want to disable shuffling. > > Packages that do not build in parallel, do not exactly because of the > build ordering. So far, we resorted to just forcing -j1 for those > packages, because -j1 hid away the build order issue. > > So, shuffling them even in -j1, would cause build failures. > > And as you said, and as the make manual states, .NOTPARALLEL disables > shuffling. > > I.e., technically, those two lines are equivalent (assuming make 4.4): > > MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > MAKE1 := $(HOSTMAKE) -j1 --shuffle=none > > Except the latter is explicit about its goals: single job and no > shuffling, while the former is only explicit about not parallel (also I > do not like that --eval, it feels horribly weird, especially with the > trailing colon). > > What I am saying, is that I prefer we explicitly disable shuffling, > rather than rely on the implicit behaviour of .NOTPARALLEL. > > Finally, my proposal only appends --shuffle=none if it finds --shuffle > in MAKEFLAGS. If it is not present, we do not need it, either because > we are make 4.3-or-earlier, or we are make 4.4 without shuffling. I'll test a little more and send a patch based on that. > > > as it's useful for > > reproducing failures, > > This is irrelevant to set MAKE1, because with MAKE1 we know the build > ordering matters, and that we explicitly state that we do not want to > be bothered by it. > > > although there's currently a bug which doesn't set the seed correctly: > > https://savannah.gnu.org/bugs/index.php?63215 > > > > Using .NOTPARALLEL should ensure the shuffle value is still passed down > > Sorry, but .NOTPARALLEL disables shuffling, so I am lost: why would it > matter to have the seed passed down? Nevermind, it seems --shuffle=none works the same, I assumed it would cause the submake to drop the initial seed value(for printing in the event of an error) but it apparently doesn't at least with this patch: https://savannah.gnu.org/bugs/index.php?63215#comment0 > > > so that it appears in the failure message(once that bug is fixed) while > > still disabling parallel build for the parallel incompatible package. > > Parallel-incompatible packages are incompatible exactly because the > build ordering does matter to them, so we do not want to shuffle them. Right, but we still want to see the seed value on error, even if the package is using MAKE1, seems to work fine with --shuffle=none though. > > > We want to be able to reproduce failures by passing the shuffle seed to the > > top level make invocation. > > This is about debugging our dependency issues, not about the packages' > Makefiles. Well seed is supposed to get passed down all the way, otherwise it wouldn't properly test parallel issues as those can affect both cases. > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 19:30:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 13:30:14 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/Makefile.in: set --shuffle=none for MAKE1 Message-ID: <20221016193014.3384022-1-james.hilliard1@gmail.com> Make 4.4 introduces a shuffle mode which randomizes prerequisites in order to better flush out issues with parallel builds, as this mode randomizes prerequisites even when using -j1 builds we must also explicitely mark parallel incompatible builds by setting --shuffle=none which disables goals prerequisites randomization for the parallel incompatible package when running in shuffle mode. Signed-off-by: James Hilliard --- Changes v1 -> v2: - use --shuffle=none to disable shuffle for MAKE1 --- package/Makefile.in | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..c69c201c46 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -17,7 +17,9 @@ else PARALLEL_JOBS := $(BR2_JLEVEL) endif -MAKE1 := $(HOSTMAKE) -j1 +# Only build one job at a time, *and* to not randomise goals and +# prerequisites ordering in make 4.4+ +MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) override MAKE = $(HOSTMAKE) \ $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) -- 2.34.1 From sfammonius at gmail.com Sun Oct 16 20:45:36 2022 From: sfammonius at gmail.com (samuel ammonius) Date: Sun, 16 Oct 2022 18:15:36 -0230 Subject: [Buildroot] Help with isolinux: "No DEFAULT or UI configuration directive found!" Message-ID: Hello everybody, I don't know anything about embedded systems or bootloaders or most of the stuff involved with buildroot. I wanted to make an installer that could be burned to a USB to run a graphical app that depends on Qt. I have the dependencies and filesystem all set up, but booting the generated iso9660 image gives me this message: Booting from DVD/CD... ISOLINUX 6.03 ETCD Copyright (C) 1994-2014 H. Peter Anvin et al No DFEAULT or UI configuration directive found! boot: _ Typing anything into the "boot" prompt just repeats the same error message. Does anyone know how this problem could be fixed? --- Thanks, Sam -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sun Oct 16 20:52:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 22:52:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/libosip2: security bump to version 5.3.1 Message-ID: <20221016205254.13656-1-fontaine.fabrice@gmail.com> Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer overflow via the component osip_body_parse_header. Signed-off-by: Fabrice Fontaine --- package/libosip2/libosip2.hash | 2 +- package/libosip2/libosip2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libosip2/libosip2.hash b/package/libosip2/libosip2.hash index 071ad7e61a..a563f0c4cd 100644 --- a/package/libosip2/libosip2.hash +++ b/package/libosip2/libosip2.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -sha256 f4725916c22cf514969efb15c3c207233d64739383f7d42956038b78f6cae8c8 libosip2-5.3.0.tar.gz +sha256 fe82fe841608266ac15a5c1118216da00c554d5006e2875a8ac3752b1e6adc79 libosip2-5.3.1.tar.gz # Hash for license file: sha256 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de COPYING diff --git a/package/libosip2/libosip2.mk b/package/libosip2/libosip2.mk index 2f9b7a9242..618d98a85c 100644 --- a/package/libosip2/libosip2.mk +++ b/package/libosip2/libosip2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSIP2_VERSION = 5.3.0 +LIBOSIP2_VERSION = 5.3.1 LIBOSIP2_SITE = $(BR2_GNU_MIRROR)/osip LIBOSIP2_INSTALL_STAGING = YES LIBOSIP2_LICENSE = LGPL-2.1+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:09:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:09:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/dhcp: security bump to version 4.4.3-P1 Message-ID: <20221016210931.54469-1-fontaine.fabrice@gmail.com> - Corrected a reference count leak that occurs when the server builds responses to leasequery packets. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #253] CVE: CVE-2022-2928 - Corrected a memory leak that occurs when unpacking a packet that has an FQDN option (81) that contains a label with length greater than 63 bytes. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #254] CVE: CVE-2022-2929 https://kb.isc.org/docs/cve-2022-2928 https://kb.isc.org/docs/cve-2022-2929 https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES Signed-off-by: Fabrice Fontaine --- package/dhcp/dhcp.hash | 4 ++-- package/dhcp/dhcp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dhcp/dhcp.hash b/package/dhcp/dhcp.hash index be03423db8..7dd80a7acc 100644 --- a/package/dhcp/dhcp.hash +++ b/package/dhcp/dhcp.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/dhcp/4.4.3/dhcp-4.4.3.tar.gz.sha256.asc -sha256 0e3ec6b4c2a05ec0148874bcd999a66d05518378d77421f607fb0bc9d0135818 dhcp-4.4.3.tar.gz +# Verified from https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1.tar.gz.sha256.asc +sha256 0ac416bb55997ca8632174fd10737fd61cdb8dba2752160a335775bc21dc73c7 dhcp-4.4.3-P1.tar.gz # Locally calculated sha256 45a39c430be0920cb9570f34b32d2378fe6048c034f2f3265b9326d64ada73df LICENSE diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk index 183c8322d6..7be40191c8 100644 --- a/package/dhcp/dhcp.mk +++ b/package/dhcp/dhcp.mk @@ -4,7 +4,7 @@ # ################################################################################ -DHCP_VERSION = 4.4.3 +DHCP_VERSION = 4.4.3-P1 DHCP_SITE = https://ftp.isc.org/isc/dhcp/$(DHCP_VERSION) DHCP_INSTALL_STAGING = YES DHCP_LICENSE = MPL-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:15:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:15:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpfm4: bump to version 4.12.0 Message-ID: <20221016211517.58308-1-fontaine.fabrice@gmail.com> Major updates: - Add IBM Power10 core PMU support - Add Intel IcelakeX core PMU support - Add Intel SapphireRapid core PMU support - Add Intel SapphireRapid RAPL PMU support - Update Intel Icelake RAPL PMU support - Add support HiSilicon Kunpeng uncore PMUs - Add support HiSilicon Kunpeng core PMU - Remove arm_fujitsu_a64fx_support for ARM(32 bit) - Update Intel Skylake event table - Add Intel PERF_METRICS event support for Icelake - Add support for ARM Neoverse N2 core PMU - Add ARM SPE events for Neoverse N1 core PMU - Add cgroup-switches software event - Add Intel Tigerlake and Rocketlake core PMU support - Add AMD64 Fam19h Zen3 L3 PMU support - Add AMD64 Fam17h Zen2 RAPL support - Add AMD64 Fam19h Zen3 core PMU support - Add RAPL for AMD64 Fam19h Zen3 processor - Update ARM N1 event table - Update AMD Fam17h Zen2 event table - s390: Update counter definition for IBM z16 https://perfmon2.sourceforge.net/ Signed-off-by: Fabrice Fontaine --- package/libpfm4/libpfm4.hash | 6 +++--- package/libpfm4/libpfm4.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libpfm4/libpfm4.hash b/package/libpfm4/libpfm4.hash index bdc7806a7c..42740adb1e 100644 --- a/package/libpfm4/libpfm4.hash +++ b/package/libpfm4/libpfm4.hash @@ -1,6 +1,6 @@ # From http://sourceforge.net/projects/perfmon2/files/libpfm4/: -sha1 112bced9a67d565ff0ce6c2bb90452516d1183e5 libpfm-4.11.0.tar.gz -md5 4811c1d99b95752b4ba53b89a9389ec3 libpfm-4.11.0.tar.gz +sha1 4c61cfb489426d9fff15428cb8536ba0e391c8ac libpfm-4.12.0.tar.gz +md5 9e4f9b89d23171eb9314a948a51b4284 libpfm-4.12.0.tar.gz # Locally calculated -sha256 5da5f8872bde14b3634c9688d980f68bda28b510268723cc12973eedbab9fecc libpfm-4.11.0.tar.gz +sha256 4b0c1f53f39a61525b69bebf532c68040c1b984d7544a8ae0844b13cd91e1ee4 libpfm-4.12.0.tar.gz sha256 beef323d68fc5db9c67b20e8e9de7ccde371d20cdbcdd686804055b18b926d90 COPYING diff --git a/package/libpfm4/libpfm4.mk b/package/libpfm4/libpfm4.mk index 2144766d96..7165d78cd9 100644 --- a/package/libpfm4/libpfm4.mk +++ b/package/libpfm4/libpfm4.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPFM4_VERSION = 4.11.0 +LIBPFM4_VERSION = 4.12.0 LIBPFM4_SOURCE = libpfm-$(LIBPFM4_VERSION).tar.gz LIBPFM4_SITE = http://downloads.sourceforge.net/project/perfmon2/libpfm4 LIBPFM4_LICENSE = libpfm4 license -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:27:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:27:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/ksmbd-tools: bump to version 3.4.6 Message-ID: <20221016212707.315323-1-fontaine.fabrice@gmail.com> https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 Signed-off-by: Fabrice Fontaine --- package/ksmbd-tools/ksmbd-tools.hash | 2 +- package/ksmbd-tools/ksmbd-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ksmbd-tools/ksmbd-tools.hash b/package/ksmbd-tools/ksmbd-tools.hash index 589128c189..b31c66bbe7 100644 --- a/package/ksmbd-tools/ksmbd-tools.hash +++ b/package/ksmbd-tools/ksmbd-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c1b9096f37eddaced055dfc90a9ed06ceb9e8ceb608ed46c51ed5a2c901ddc81 ksmbd-tools-3.4.5.tar.gz +sha256 09ab343e9bf10ddfdd3216f400b19740a391645bf3645fa6f136b8da36306559 ksmbd-tools-3.4.6.tar.gz sha256 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de COPYING diff --git a/package/ksmbd-tools/ksmbd-tools.mk b/package/ksmbd-tools/ksmbd-tools.mk index e7f2bf91bc..c4f9c503e6 100644 --- a/package/ksmbd-tools/ksmbd-tools.mk +++ b/package/ksmbd-tools/ksmbd-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -KSMBD_TOOLS_VERSION = 3.4.5 +KSMBD_TOOLS_VERSION = 3.4.6 KSMBD_TOOLS_SITE = https://github.com/cifsd-team/ksmbd-tools/releases/download/$(KSMBD_TOOLS_VERSION) KSMBD_TOOLS_LICENSE = GPL-2.0+ KSMBD_TOOLS_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:27:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:27:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libgee: bump to version 0.20.6 Message-ID: <20221016212744.315519-1-fontaine.fabrice@gmail.com> https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS Signed-off-by: Fabrice Fontaine --- package/libgee/libgee.hash | 4 ++-- package/libgee/libgee.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libgee/libgee.hash b/package/libgee/libgee.hash index 54a46f954c..ea723481e4 100644 --- a/package/libgee/libgee.hash +++ b/package/libgee/libgee.hash @@ -1,5 +1,5 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.5.sha256sum -sha256 31863a8957d5a727f9067495cabf0a0889fa5d3d44626e54094331188d5c1518 libgee-0.20.5.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.6.sha256sum +sha256 1bf834f5e10d60cc6124d74ed3c1dd38da646787fbf7872220b8b4068e476d4d libgee-0.20.6.tar.xz # Hash for license file: sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING diff --git a/package/libgee/libgee.mk b/package/libgee/libgee.mk index 7d8d3d4863..5ce56a2b3b 100644 --- a/package/libgee/libgee.mk +++ b/package/libgee/libgee.mk @@ -5,7 +5,7 @@ ################################################################################ LIBGEE_VERSION_MAJOR = 0.20 -LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).5 +LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).6 LIBGEE_SITE = http://ftp.gnome.org/pub/gnome/sources/libgee/$(LIBGEE_VERSION_MAJOR) LIBGEE_SOURCE = libgee-$(LIBGEE_VERSION).tar.xz LIBGEE_DEPENDENCIES = host-pkgconf host-vala libglib2 -- 2.35.1 From cpanel at busybox.net Sun Oct 16 22:09:38 2022 From: cpanel at busybox.net (cPanel on busybox.net) Date: 17 Oct 2022 00:09:38 +0200 Subject: [Buildroot] busybox.net WARNING: The email account "buildroot@busybox.net" storage is almost full. Message-ID: <20221017000937.42DB86937BF44605@busybox.net> The email account " buildroot at busybox.net " is almost full. The email account currently uses 91.68% (229.19 MB / 250 MB) of its capacity. You should remove some emails from the mailbox as soon as possible in order to prevent the loss of any future email. Use the Email Disk Usage tool at https://busybox.net:2096/?goto_app=Email_DiskUsage , or ask the system administrator to upgrade your account to a larger quota. The system generated this warning on Friday, September 21, 2018 at 6:27:01 (UTC). You can disable the ?Quota :: MailboxWarning? notice type through the cPanel interface: https://busybox.net:2083/?goto_app=ContactInfo_Change Do not reply to this automated message. -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Sun Oct 16 22:42:32 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 15:42:32 -0700 Subject: [Buildroot] [PATCH 1/2] package/docker-cli: bump to version 20.10.19 Message-ID: <20221016224233.237038-1-christian@paral.in> This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart --- package/docker-cli/docker-cli.hash | 2 +- package/docker-cli/docker-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-cli/docker-cli.hash b/package/docker-cli/docker-cli.hash index 8af47adc63..153e0e5d00 100644 --- a/package/docker-cli/docker-cli.hash +++ b/package/docker-cli/docker-cli.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 87ba64f76d3bb98666fa44552c3eb0b1c10e5e9c43010e8dbc180ba22690413a docker-cli-20.10.18.tar.gz +sha256 f4398ad858274605f8e4e55d4618b2f5bdff6969a4afa232842bb2417d8a98db docker-cli-20.10.19.tar.gz sha256 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0 LICENSE diff --git a/package/docker-cli/docker-cli.mk b/package/docker-cli/docker-cli.mk index 707069512e..1fac21790b 100644 --- a/package/docker-cli/docker-cli.mk +++ b/package/docker-cli/docker-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_CLI_VERSION = 20.10.18 +DOCKER_CLI_VERSION = 20.10.19 DOCKER_CLI_SITE = $(call github,docker,cli,v$(DOCKER_CLI_VERSION)) DOCKER_CLI_LICENSE = Apache-2.0 -- 2.38.0 From christian at paral.in Sun Oct 16 22:42:33 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 15:42:33 -0700 Subject: [Buildroot] [PATCH 2/2] package/docker-engine: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-1-christian@paral.in> References: <20221016224233.237038-1-christian@paral.in> Message-ID: <20221016224233.237038-2-christian@paral.in> This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart --- package/docker-engine/docker-engine.hash | 2 +- package/docker-engine/docker-engine.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-engine/docker-engine.hash b/package/docker-engine/docker-engine.hash index e1c29f0926..dfd4f4e365 100644 --- a/package/docker-engine/docker-engine.hash +++ b/package/docker-engine/docker-engine.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9907aaaf39fb1c2c3fd427192e4a63d7adf8ddc9fb0e29c692a6ca10de9c34f6 docker-engine-20.10.18.tar.gz +sha256 228caadac1b37a5ba310eb25418cf1fdd8878336f1d8faf0a2daa87fcc577577 docker-engine-20.10.19.tar.gz sha256 7c87873291f289713ac5df48b1f2010eb6963752bbd6b530416ab99fc37914a8 LICENSE diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk index 246419ec4f..dc45baf055 100644 --- a/package/docker-engine/docker-engine.mk +++ b/package/docker-engine/docker-engine.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_ENGINE_VERSION = 20.10.18 +DOCKER_ENGINE_VERSION = 20.10.19 DOCKER_ENGINE_SITE = $(call github,moby,moby,v$(DOCKER_ENGINE_VERSION)) DOCKER_ENGINE_LICENSE = Apache-2.0 -- 2.38.0 From christian at paral.in Sun Oct 16 23:00:46 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 16:00:46 -0700 Subject: [Buildroot] [PATCH 1/1] package/docker-compose: bump to version v2.11.2 Message-ID: <20221016230046.451093-1-christian@paral.in> https://github.com/docker/compose/releases/tag/v2.11.2 Signed-off-by: Christian Stewart --- package/docker-compose/docker-compose.hash | 2 +- package/docker-compose/docker-compose.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-compose/docker-compose.hash b/package/docker-compose/docker-compose.hash index 46a8c59d55..39f98523b8 100644 --- a/package/docker-compose/docker-compose.hash +++ b/package/docker-compose/docker-compose.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7f051283dc2c047a40604c52dffa579a079bdf54eca742da54f8352dcffc3549 docker-compose-2.10.0.tar.gz +sha256 69d7d0311ac34ed4543f9a694995fbc4e2b785976a5a710015c20f0d04c204cb docker-compose-2.11.2.tar.gz sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd LICENSE diff --git a/package/docker-compose/docker-compose.mk b/package/docker-compose/docker-compose.mk index 1d071cc423..bc88d8df88 100644 --- a/package/docker-compose/docker-compose.mk +++ b/package/docker-compose/docker-compose.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_COMPOSE_VERSION = 2.10.0 +DOCKER_COMPOSE_VERSION = 2.11.2 DOCKER_COMPOSE_SITE = $(call github,docker,compose,v$(DOCKER_COMPOSE_VERSION)) DOCKER_COMPOSE_LICENSE = Apache-2.0 DOCKER_COMPOSE_LICENSE_FILES = LICENSE -- 2.38.0 From d.lang at abatec.at Mon Oct 17 06:21:18 2022 From: d.lang at abatec.at (Lang Daniel) Date: Mon, 17 Oct 2022 06:21:18 +0000 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: drop dbus check Message-ID: Since 6f5f6bc dbus is selected when iwd is selected. It is only a runtime dependency, so drop the build dependency. Signed-off-by: Daniel Lang --- Changed v1 -> v2: - dbus is only a runtime dependency, drop the build dependency (thanks Yann). package/iwd/iwd.mk | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 297e1fabe9..002988cf33 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -15,16 +15,11 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share IWD_DEPENDENCIES = ell -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif - ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) IWD_LICENSE += , GPL-3.0+ (client) -- 2.25.1 From jesseevg at gmail.com Mon Oct 17 06:39:31 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Mon, 17 Oct 2022 08:39:31 +0200 Subject: [Buildroot] CMake compilation database with BR wrapper Message-ID: Hello, Has anyone had any experience with getting the cmake EXPORT_COMPILE_COMMANDS functionality working in a clean way with projects built through the BR compiler wrapper? I've got it working to satisfy my clang-tidy by either passing additional args in cmake that are normally behind the compiler wrapper, or running make through bear and using a config file that passes the same extra args, but I was wondering if there's a "clean" solution that would allow me to feed this into the compilation database that does not depend on a config file or some fixed value in my cmakelists? Thanks! Best regards, Jesse From neal.frager at amd.com Mon Oct 17 07:10:01 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 01:10:01 -0600 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset Message-ID: <20221017071002.48266-1-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu102. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager --- configs/zynqmp_zcu102_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig index 217fa0814b..66c24c4b64 100644 --- a/configs/zynqmp_zcu102_defconfig +++ b/configs/zynqmp_zcu102_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From neal.frager at amd.com Mon Oct 17 07:10:02 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 01:10:02 -0600 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <20221017071002.48266-2-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu106. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager --- configs/zynqmp_zcu106_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig index 3d98dffe01..896fea0ab2 100644 --- a/configs/zynqmp_zcu106_defconfig +++ b/configs/zynqmp_zcu106_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu106/zcu106_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From thomas.petazzoni at bootlin.com Mon Oct 17 07:16:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 09:16:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> Message-ID: <20221017091644.1104527b@windsurf> Hello James, On Sun, 16 Oct 2022 12:45:06 -0400 James Hilliard wrote: > > Again, that is very interesting, but please, please, conordinate with > > the rest of us when you do such changes, because that is very weird, as > > Fabrice noted, to suddenly get build failures out of the blue when > > nothing seemed to have otherwise changed. > > I've been experimenting a bit in general with autobuilder settings to try > and fix some issues with poor coverage. > > One other reason for testing with shuffle=random is to make higher kconfig > probability values more useful(as otherwise build failures will be concentrated > in packages early in the dependency ordering) : > https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ Thanks a lot for all this work, which I find really useful. However, like Yann said I believe we need to coordinate better. I think we would prefer to see build results submitted on autobuild.buildroot.org to only be generated by the official/upstream autobuild-run script. Otherwise, it's super confusing as we get results that corresponding to variations of build configurations/build logic that we are not even aware they exist. Another concern is that the autobuilder results are already extremely bad these days, and therefore the priority is more on addressing/fixing the existing issues rather than adding more. It's a lot easier/practical to fix new problems when they are not mixed together with zillions of old problems. Again, thanks a lot for your work on this! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 05:37:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 05:37:07 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-16 Message-ID: <20221017053714.E48DD40482@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-16 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 5 | 3 | 0 | 8 | 2022.08.x | 10 | 13 | 0 | 23 | master | 109 | 577 | 12 | 698 | Classification of failures by reason for master ----------------------------------------------- berkeleydb-5.3.28 | 35 bearssl-0.6 | 32 ca-certificates-20211016 | 32 glibc-2.36-44-g2628500f5dff... | 25 gpm-1.20.7 | 23 libnss-3.84 | 21 slang-2.3.2 | 20 coremark-pro-1.1.2743 | 19 host-gcc-initial-11.3.0 | 19 host-gcc-final-11.3.0 | 17 host-f2fs-tools-1.15.0 | 14 crun-1.5 | 13 host-binutils-2.38 | 13 brltty | 11 linux-6.0.1 | 11 sysvinit-2.99 | 11 autofs-5.1.8 | 9 dieharder-3.31.1 | 9 systemd-250.4 | 9 xz-5.2.7 | 8 btrfs-progs-5.16.2 | 7 host-gcc-initial-10.4.0 | 7 host-riscv-isa-sim-1.1.0 | 7 package/openssh/openssh.mk:... | 7 gmrender-resurrect-0.1 | 6 igd2-for-linux-2.1 | 6 libarchive-3.6.1 | 6 ocf-linux-20171122 | 6 fbset-2.1 | 5 libgpg-error-1.45 | 5 dash-0.5.11.5 | 4 efivar-38 | 4 gerbera-1.10.0 | 4 host-gcc-initial-12.2.0 | 4 libdnet-1.16.1 | 4 libglib2-2.72.3 | 4 musepack-r475 | 4 cryptodev-linux-1.12 | 3 dmraid-1.0.0.rc16-3 | 3 freeradius-server-3.2.0 | 3 frotz-2.54 | 3 gobject-introspection-1.72.0 | 3 host-delve-1.8.0 | 3 host-gauche-0.9.12 | 3 host-go-1.19.1 | 3 libee-0.4.1 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 linux-5.10.145-cip17 | 3 refpolicy-2.20220106 | 3 sslh-1.22c | 3 unknown | 3 binutils-arc-2020.09-release | 2 duma-2.5.15 | 2 host-berkeleydb-5.3.28 | 2 host-binutils-2.37 | 2 host-binutils-2.39 | 2 host-gcc-final-12.2.0 | 2 host-moby-buildkit-0.10.0 | 2 host-protobuf-c-1.4.1 | 2 host-rust-1.64.0 | 2 host-vde2-2.3.2 | 2 jhead-3.06.0.1 | 2 linux-pam-1.5.2 | 2 lttng-modules-2.13.1 | 2 mimic-1.1.0 | 2 musl-1.2.3 | 2 nanocom-1.0 | 2 netsurf-3.10 | 2 open62541-v1.3.3 | 2 openssh-9.1p1 | 2 openssh-legal-info | 2 perl-5.34.1 | 2 portaudio-190700_20210406 | 2 pv-1.6.20 | 2 sdl-1.2.15 | 2 zeek-4.1.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dahdi-linux-5c840cf43838e06... | 1 dawgdic-16ac537ba9883ff01b6... | 1 dmalloc-5.6.5 | 1 elfutils-0.186 | 1 exempi-2.6.1 | 1 file-5.41 | 1 flite-2.2 | 1 fontconfig-2.13.1 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/squashfs/squashfs.mk:56:... | 1 gensio-2.5.5 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-gcc-final-10.4.0 | 1 host-gdb-11.2 | 1 host-gdb-arc-2020.09-releas... | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 libabseil-cpp-20220623.1 | 1 libcap-ng-0.8.3 | 1 libdcadec-0.2.0 | 1 libgcrypt-1.10.1 | 1 libgeos-3.11.0 | 1 libnl-3.6.0 | 1 libostree-2022.6 | 1 libxml2-2.10.2 | 1 linux-5.10.145-cip17-rt7 | 1 moarvm-2022.06 | 1 mtd-2.1.3 | 1 mxs-bootlets-10.12.01 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.2 | 1 python-ujson-5.2.0 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8723ds-76146e85847beb242... | 1 spice-0.15.0 | 1 stress-ng-0.13.05 | 1 tealdeer-1.5.0 | 1 tstools-08f6be304040e7b8476... | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 xserver_xorg-server-21.1.4 | 1 zeromq-4.3.4 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5a52cbc34caf1cd92943a57218ec5bae5a543339 | sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5d3497192a7a41a7cc66b7abc7fa38e6fbffe408 | aarch64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4f1029fd46d2a6348317329679e1b7ece58ca5fe | arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/bbaf19c0de5d97aa4885985b2ab885c7713ab693 | ORPH mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/190abe408e3e8d8484b241be821a1ac3dcc580c3 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/31faa9e66d8708a18a88ee9071272938eb961a46 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/37d7e57494f323693b33e546cb9298c713ae5252 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/85cbc365394674c8c5b7dad98238a251707f2d45 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7595002a3232201b68b751c0177290484ca6be28 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/865b42ecba3dd617189db5e3825aa843de6c815e | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/c363392721ab4f51f201962b1bd0beb9a49d26dd | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/53dadb83229ac08197b8777e11b05fe0bbb68f4e | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a8a7f53aeb2e7b7b8a2f1d44b3876a416351322d | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/d9f7cdc15d5035259ee8e2b2c2f705e9b7fc4aea | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a344b1cbd15e9e2a29c7bba7fb30a4da7e163009 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f98b7373227b19f298c79ffc0faf8c35d1462d9b | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8441906b91f0090f27743b9132a311f2d6212e08 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f85adeeba7558449239e89b47360a1e797fa8694 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a7b6b75dfa84f306ef86be41135b11c209ce683a | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/cd483c5a1569ea03c8c014ecbbaa55c9b1f045b7 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/392eb25bbb6131b687088ca39826ad10845add87 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a62bbbad1e149a98b17345296df2e5dd7db1eef7 | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d0e6269043b6c0c10e8e3e428ca427ccd149fd05 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3341556eaaa8b35971409a8a109f87fcae202220 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/550b50b820678731bccdcc7440df6b000740dce6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a77800cfb486ef59b7164205dcfc11429969212c | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/206da97c9460408257d268acc04e285910aaa2c2 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a88dbead5622aadd1230a4d25129f16b08c4567 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c62eb9cc26e98c56a985e297c541003792fdc99a | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ffcc891015349e66c09ed46a01733835484ff693 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6242112c75c76e85b207ae72fdede5717f07903d | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ce957809e083f84241f4f06e3781031cb90f29a8 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6bb298d5137f3b27ef4eec7766ab9989b1032965 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6e15584544a56fbef4aba831eb77acd4c7034e23 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2ea5debf640de75e9f9618c541271463f19825f4 | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/07fa1f80b7a0f5177e4ae372afdd8308da90612a | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/466ebeef6f728b8683e97074b0f876feac6abfd5 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/60dd6aa468d529f103161590ac87fe4b681c3138 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8ac030ebbe944e6714c789c03e2cede3503c713f | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b5d6c0ca5aa4ac4fd31efd7666fed21614bb645a | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/150fc609cf25b357aaf224bfc6d56eb0eac4f659 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dd6a492ccd9e34c4b56ac9942fae563202bf4c88 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5882d2810d3f0b510e1f24529b11679d369e0f9c | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/586d8dda030b8c56ae4de3addca07524bc14bc99 | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1bc07c2a7e7cabbb5f4e8c5adc3cfb8ce30b0273 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2bd8abf64d8ba675a7563d3f85cc8bbda38a4438 | powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4de27634ec1e47584fac581f1bd7c7c04562a8b9 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d52f7e0489541554ea2bc21eb275a8eb2b7ba4f1 | ORPH sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c02ef451d836cc6f8853b9d11964f07907ce5566 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b335d1b8d6c92d51044b459dead01630395abc50 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/535909d4fe7645ff6c845a9d40218835c68656a7 | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cc111ad3a6cf604a00523a8724dd9cfb443eee32 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/aa3ef68f35de57393f9da7ee4a1a551b96959614 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f3657f7c6fdbfcaec5110265d33a710046b40b9a | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6951c4d92dd6475a127bc339a55bc36d209ea177 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/252021bd795fae17ff412e73300d106ea568ffd1 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2b0339a3bd02e8f9ff6bf68631ca72ec7b4a23c0 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ba70a48fc2adae040296d4ae2cc39926f02b103b | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c9fa04b02d5b62fc70cadf85a25001880c9494b9 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7f75f83f68cfce39d0df68d9bfb6090113482959 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/81ca3362b5b69b34f9e44c545d7c1f9d8e933626 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e5376ae72061ab805279c9180bae70684e3e8dfb | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4c5479b14cb55f7790904727ac281089f1f697d4 | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4a7fadb67f5f491c60d32c4b7167c7758b8952f9 | ORPH x86_64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/36fe9e94c3c2353a95afe106f903fdce929f0185 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/72f3793655ff542807b3e0e5f0f6ee5a06f95fdb | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5248798f1eb2fb1d9a95df5f276d36336beba01b | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1c24aa1bcdac1c6c1f30c0941dcfe80c8be845e4 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cd02c8b8b0c9e31a0dbccbb11cf50f01e9cee319 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cf192f03a8ff3fb0a65320aa59f426f99a06f577 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1815484aef016109cd7203d09c6e14d10bf7a0c7 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6578a04a926efa05965313398243710ab83fc92 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0ae4d371eb4c9156905593a7a9c6f7aa55a9eeae | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a4cdfc8cd9a0961f591871fec860e722041185da | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7b0f84e2a90e3acd4c4224a324cee56ff22627a8 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b076316ab93a8fe685265b56ae228347ea417bd1 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7ee066dce50cb77b47870cc9f2b575aeeb7068bc | ORPH sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/88ad7f9b8fa333c0150a6d11fe66d11e9517b36a | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/63be92bc0472d0a2ff2fd94c73f4707687c3b971 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/27555ee67e61b1d7839926908faf4a4f3948e72f | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fd86e270db65f9dd501d7e1b2a39d53d15e6f093 | ORPH arc | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/2b4dc4143a478f106397e279b86372825dd1f488 | arc | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/1df94f7b1030150dec442bc91a98d0654582f7fe | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/44d56870a4e310621ee2a5597b0432ba4a805b09 | sh4aeb | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/e9c7e1b03290873c630f665a6398c6ee790786b7 | ORPH microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f1b7344ad5809336c6af2e015ee1ac21fb70b940 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/8d4cc2c82b36fd9c0916ae6fa4d6842cc6939ceb | or1k | brltty | TIM | http://autobuild.buildroot.net/results/55666f77b10537d2099523c146e756c01e9f7f95 | mips | brltty | TIM | http://autobuild.buildroot.net/results/250d530c76294d8dbb912de910a2f5a7a9d3e84b | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/a4cb6ce519db0c60c1a69c9800b2de42f5cb3801 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/171043e4a70fcc42058a5ed5d68962ceb23dc004 | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/8ea088c2d59af9b712f692263552c97e3575bc01 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/96a9a0bc04171f8adfd7f0a6d694ac2d19b5de85 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/babf2a4c2f23a843f59615d3079851d2faba23ac | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/4ed527dbfb4d18052e651c7a08834b1860bd4267 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/477c0339e004a3a78267a35b54a7c261e02574e2 | aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/70e6ceb54adf80cce4d70047638417db707c6dc8 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6c7132023aab50c61ef3c808e180a5476c5b42f1 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/73972826b16eab0da5a667301d716eff9a31af06 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0f08c678e660affb71a57b135bb773093c789acf | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/932d61e3d486a49b55c7dcd2936146253db2e6c7 | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5465f6e5051d3a1180f35eca2459b38f40ee2fc1 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/34aa5b04bae683c6a08a6f6b87490ee0d0ef4f9a | ORPH powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c903018c748109a299af8e40db4cafd7b4824319 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/31c71a9f3f07520659a9ef04ee79b04c1584faba | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d654d5d22de2f66ce3fdfb44e2a15d2c42f0d08c | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b21ce0902e8c7549dd144455e6b239c365175901 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0464207ecdc189cda4f8cc8f3bdc135a2b729a60 | sh4eb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4bfa3c221cb691b463d75343b7767dd1815a51ff | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aba216a21fa69851774d02ed8d333e949f39502 | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c3929f49f3616e49d3e6e784657302c2dcf14107 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a3ef9097da9da50a2a5cc1add2986242cfb4fe4f | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/11be16bd2c829534917e8b68f78a274a978a6780 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/cbfa75709ab1266b048a03ca5cb5cfafb804a1c8 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7793af50cf2865905b817059a225e59d56ffd6d8 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/af682ad20a044ab010d274971da686171c58bf38 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ceda33923ac69e15c0a832aac121789bf24fef8b | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61ecf82cf4129650d32b97e5b549c7433c966466 | sh4a | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d14816191561e40e97c3983ad3450fc46faa722f | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7bbbc6a9698423aaa616bb75ffbb2951f3b6450e | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6d845a24aa8e489675af9d25557f738d80e22720 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/181efe03de57f502647672084ed389a7d2a34f56 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/eebd29ecdc78af3a185dc1781dafac3280fa31e9 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e442ba9c9961a16177a0ae4b81d69ed26c15a87f | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0610527ebad2d6cc688e8fcaba03d7900d32c9f4 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/46e6094644b12e3cf24cfe4709b35bac116e6d01 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2fcf84ba162c9e88254a29c8eea3ba090723546c | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22acde26d6cd44cf1888fdeb5902c9eec314dd11 | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/21635bde0576abda263c84cd8aa635ab7f7823fb | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5c8bde63aa4110109611397b8824b4b4cbbd669a | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d17b776b47b195a1d6c0364ac6d714d00ab46f49 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/81905f969931317a7667b474b38ce19696bb753d | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ecd11bb80b21b3c8bd860ce127ddc671869d10d7 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b356c1bd90fb07c799c727ae667c2b19df560fb4 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9e4261d779684db137ea96b5d806eee4498ee800 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/62bb1da627189b5a72b0dea92cbc7b8f695abfa2 | mipsel | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/00042bec42276e687688386063bdb20762d522e7 | ORPH powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/df43bd014ca6893a7eb169e9b4d2e502ec5e1d00 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b0f61e016c8cf02aa40340a29058597144d4666f | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3e53eaa43bf91ff7d72062b571122860dc04e622 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9b796a28caf30829305664da5aadb3e8384ae4c9 | riscv64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e4a83bc116adf90c82072f4d853263bbc0bb8488 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ef6312f90575873475189e718355bf40b9d1735c | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fb6aaa0cbc9d429273c932dc380b75930aba0668 | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ca5a2eefb7100a1cebabac749ad26392e61e3d21 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a0dd0070940f5475f24c691e298b5b77b4429337 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e01e869ddbcfd8e16612e06085ffb81320435d92 | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2ccb37373c29012660825a2a652b076eeeaf279c | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a3a9f7c4c75148e7ca262352d2f6bba4887d5dfb | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/498899ce0cec996fb28dcc6f85961c3e4026691e | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/166ce4fd830cdff9d80c6020b5075aeaf01bf463 | nios2 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/261ca3400284a9f7d72cb0811508e996ff80ba86 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/549f9e10b062adbc2dfb42aa08ccd64bcc3decca | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bb105728edb41e45b3a046c1f23f0a9e6a692401 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2f65baf8a05655c85b4f1791e30f786e2b34f4b3 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6ff34ec32984884494827f3a23aa4a2152428c43 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07eee5783dffa09a1b74ca99f06cb28fecf2edf0 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/634cd2c73d1947068d8b816bd487b9531b24fa5b | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/057be8fe620761c452515c268a2542a17324a7f0 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8444bb6307ca3729f0e8e967de8f74506aa34f21 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9edfd0509c6a83b4d7706deb52a1bd1adc91a8b4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05bf7ff82030fe5fc5b49d03348ea85030eb3026 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c7d506b1bb0e4cd291e9fe4b544985a90a89625 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f6247464c13964d1013310b69008ee7e363e548f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0f7d0bacfd62007ffe542492f4872b2c6859003a | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6206f632566ba43f38568fa82ebac1ad8edf4946 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bd0b03c5e1a3895bca1da03171128d86d66f0084 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0ff4bb003f48526c1abddc1be56add18cdc969af | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/533dd000b4aca920e6d814f591d7ae41d15fbf36 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/1376166f93459d280d0c9298e4ef82a62b5045eb | ORPH mips64el | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/3caf837b8dcb2b0a34381eb0b789b980cb902e90 | ORPH mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/be36ffb6a449103e3386d811d6b4909ec1f1b592 | ORPH sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/2fd9e5a30fdb6f9518d0c6ae20ad5c17b8dea360 | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/89109a89c25a7b857c8e52344938e015e12d852e | ORPH arc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5b328e0d95a95847d7425f6ffdf2366795e76e89 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d5e414d4b7b19e0cd2e6c8f7f9de624fb13df934 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e7cba0eda02dd1bf756a6de35c8d68068d03c933 | ORPH riscv64 | dawgdic-16ac537ba9883ff01b6... | NOK | http://autobuild.buildroot.net/results/0a140421fe9d0e2a8e45a48a212d0b30839a4058 | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/adaa1549034c2a0f2eba3279ca8999dd9e982210 | powerpc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/41880549f60d549294a4865af8bfe73e80d6ef3e | armeb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0bc6697f9427f1a7c17b39c8f7e04a6d5e6fed36 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ab1d3ee87c979bbeaff48f0ae7d92ed8f3d504b3 | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/517f7bfec5df0fc6746844529c2dd095d805052a | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/c12c192c8807d9bc580d47033184f2434c5d9fe6 | or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/71622d71e98dea61de87c42f3f551da54acaa18c | sh4eb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ac5f6e63d6c91dc0b0850ebdd6c05ed32eb5ae01 | powerpc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/63e2b5b49f5b7261064844e2f4e690b4a56560d7 | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/e69cce746ac3147380676c051100941b0d8c3d8e | ORPH or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/291f23347b990c975755d984fdcbb1d3f8fe9a51 | ORPH sparc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/4e3ce1ea440d4916db50c37e54ba9ac816af7c32 | ORPH mipsel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/81e002a615d1e1abc5b4201b5a4e7c4fa4c052a9 | ORPH powerpc64le | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/32ec270839979e2e49dc3ea5270711a17dad94c9 | ORPH arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/0638b7f99bc3b36766e2d6d8d054b8098bbb369b | ORPH mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/a1818b88ea2587573f9f5f8f2ebcf1ba41e413e9 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/099297cc13d62758b619b1481b1693ad89749442 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9d0c35ee6686d0a74fa7d40542abdcd4b9366afc | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/2e15d3f412deaf0491c521cf3e31b5ebce1b2d5d | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a131d999a478a265e775f998956053510da5ef69 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/f226ae8bd8c6b6fe433faf472f04d3ca37474dd4 | nios2 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/ece79d65cbfbb92e1b8ac06612197455ef342207 | ORPH s390x | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/33cbe08278a3c08e43583bad5381b12e93b4dc63 | ORPH sh4aeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/551ca765a698db848ab75cf3ce30003f17d31f6f | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5a20cf8199b71a4e642307751e06a4c6beccfdf4 | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/90ff418d2d1df8808fe5695e38ea59206e73ac8b | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/8cdce6634f956366b5e386a0f9cc1086d87216e2 | ORPH mips64el | flite-2.2 | NOK | http://autobuild.buildroot.net/results/302e5afc852d2ef1f712a7c96dac7acb38c2014c | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/9ce697be04647cdcffe2cbd4687d597fd6800ef3 | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/dea62647204f639b32a21570579875fd38f325de | riscv32 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/62ae9b8e9af1674cf44f7506c964508978831399 | aarch64_be | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/c4dc6c8ee78b2855494949322d9a1f6652f41854 | microblaze | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1edfa340d105c1f60c74f388a75a8624cfe6effa | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/a004b6fff75f0bfe9a8b5edc275c75aa8ee91004 | xtensa | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/4edbd30f0dc87da491a6f5df22034481d33ba71b | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/cc22c958b97aa3cdc0853afd97ce78fca8e9047a | powerpc64le | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/04a4a0b762ce013cd81c4a58aa4522b3d7c9ac17 | aarch64 | fs/squashfs/squashfs.mk:56:... | NOK | http://autobuild.buildroot.net/results/5ff5bdf5733e2e65febecf7698299367b672dbd6 | mips | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/46f2d2d66e73e02c522ae51fbf832edda636ad9a | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/426b8fe9f8487bc1e467939d6de22af304ae5ae9 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dea58aed92a88d40849ba10a000e8cad818d09c1 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8088df80958b9e9bed960aa1d242f91f24848e3f | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/330cefbf740ddbc839a882e7ae806307d1e7a093 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63b05ba4f573c0ba9cdbdddd1657adb8de98e1b9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ace71289a94ee53aef39107c746c01ea9467889 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0b16b463bcec649abb69faca2a0b36b0b95fc6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd4816bd8422653fdb3bf55542bfd5a1713fec63 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee96854cbf7960d83b660343c3298a84dae5c0c4 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97b40943842d50253b6d799a7f4b5931b03b5b25 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/728e8627c2eb6b0ddd95e54532fa153545fafa35 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d09c5cf84ac861e3bfab91194cc28992f3fab97f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dea4b0d5f0af254d375028cf38cda0f8734376ad | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d427910d65e6ee0c74112840a958555da55884cb | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaa376ad555413184bf373641d1769eeb97dff14 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f21f236e9c81448709753fe7252b3e2cea1b2472 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db9ce3d59577ec9692f8192a0ca52d81fb70b15a | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/249006c33434a40a50875b21f3157c615119cdfb | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/803dead9199202b16a443379ef3f2d7c802a22ed | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2fa90cf0eadf5c3ecaa7a850f6cc7b9190e0ce2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c60ec9632ddeee3316854685d6ac05dc295df53 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ac4a31dfda493c745a9bc3db9d09767724858ca | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/177df4950770473f3401e130a9fa992e06c05f38 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7b0c801fc323572ffd9f9abf187f1dc93776e8f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d429cbaff65b90225f985db7e73d296776efdf0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba0bb5c7b5d8eb537f2f6fce0bf19bde7906077c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d153a59bc0e54e2e091ebbdaffdbe9d01e17b9f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07ae38d9ba027f4bb40fef993cf63b29799bc704 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d9e8b95d59a217df639072376ee18bfad6579ef | m68k | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/0a9414447d7e58a63168fdc73379f056c84932f4 | sparc64 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/73f17229b7765e0b8b7b9d4b99d5c8a4f472eeed | aarch64 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/d70ce151a6968d577f98d77b4b8f943bdbf299be | mipsel | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/3f068c241a4606a4c5176a4db0fe0abc0840425f | xtensa | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/4c24ebb0bc70cac2819da350b8b3e622f18afd04 | powerpc64le | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/054e58944a43d4307e5094b77d848d5c0054d302 | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/040cba4b97331ddff8f430cf4fc5aad17e8e96b2 | powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/87a8c1f08eade887ff89ac4fd931eac6494e09d4 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/94c6f79d50795b5f8fa116e982327d766a042190 | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1145e5c4151e12e1230129c5aad3a2a372a18b62 | ORPH x86_64 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/6731463b23097d63889142c915ccd5eb87e322e8 | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2c231d37df37b7c45b443ee5a88d8d609f774560 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0ef9d224dfdbb8b6efbed29619b01eb60fc834ed | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/5d1132f93bd8b397b2cf2e1baec51a792fee0b86 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/18835a1d813552039ca9379f6d65fdbcc17072af | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0ae91e82194d01b8dd577baa7b18b855ad91e487 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0bee985f9257065ef54b9aac6c1e2555eae5228e | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/061bb4d1b97085947f64735ca9e85e8494bcd682 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/26638bd29540a905f35d6dc0124d7ec7500a8065 | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ab78b4da019dda39696ccf792cc4a7c50c5ecaa | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/d6e995d6fe07dda452671f12fd21dac089900e29 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a2256bd694de7cc585595c7477761a7d8ac51db0 | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/029a2e62b7fa177a4abff1f7e662d7305d65b0e1 | m68k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ae848b7eea1e50b528981aa5f7226ae4aaecd16 | mipsel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/db22b1e21f9577afbf2fe660d1a60f3dff83ef53 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/065f753371b4374e0c28d62378d95b5c89c3542a | microblazeel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ef175fb9e6511a7f3c2199fd55536875d6ae687 | riscv64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/40e84957189a3bfc508c28e4a17b7e45c4c30aa0 | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/822dbaac138799cf6476c88fe3b90cc1e5fc342a | nios2 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/4a7e98a687c5c90a39fa625e441dc8911555b601 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/288dac574f72efde40700ce5c21896c05ef90fb9 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/4cf2f9603219429f72e372c9e38818b6e1aaef46 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/efe6f32dd3f76ef32e01455e68d68bba2d0e02f4 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/8da169a967703b516eaf5ec69a8c5f34ffb81669 | m68k | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8066e1e5858b0b48013e67d4fae414837659cff2 | ORPH mips | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d3ba80bd7a604a50148f35748bd6ab4a6f8c50ae | ORPH x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a26271ad14eec5d473477a8e601a0884e2adb47e | mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/f22517ed81964376060c3998537a7a1a8b872427 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/32af7ff0a7c640ac027317ec17571c922dc95b02 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/23271735473e6bfe15054c7b777da96341e7b967 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2010aa592a6a798d4d54a4df8a6bbb9c04a5412 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/059c7415b385a7efc495183b1595b3ff5897c4d4 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/79d8fc2c2a2ccbcd36294bfa1559328d02a612d2 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cb2f591169ce83a686880edfc38573021e69fe0d | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/616b343c6f1444a14e03839e223c38763fed15e3 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5dfbad5135545da511233506be36d5dbf89fed9b | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/023a2d658a955b23669c4400d1cc4e6812a2acef | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e83592f802ebe0da262635c4ba8c82fc86f0c84e | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/97893329dad001553fcd0f8d5c4857edad681514 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ce247478fb57897820f57a36396939811d2c834d | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1a49f2bb728136fb40383171d8bed79319ac06a4 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/429f96573606a1b1baec4ec8f2b6732c90e46415 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/37e5cbcdecccefe35dae36c3901cc0b8a8e84baf | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/019d46271678c6027f950165657fe556dfdc1032 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/0c5c88a5fe2a3ad35fbae3e0fbd79a4022a999ac | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f407bcb88e7e99abff60de4816db48336071b48d | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/82d73864652f86d157b32da959a06215194223da | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3fb36969e277a4c999725db8100972eb54616d81 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0734e1bea7e3e4864b2b3cb1bbd2bb7529499fcd | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/04d1b5642b6f8128acd07eb9f38c939235f7531a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d55691d475db8d8e7272e5fb40d9e928829e46fa | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bc0599e659ffe38aeb151e0aa2bdc642f4879531 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0a461b362fbac19a21293efb89836d4b4414302 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/708cb50f9968a6bc365263b58bdfd0f5fa1b2290 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ef319c1353d951fff15c8bb81c2775476158ab9c | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb14227f9d32da638be653e36f0d6eacfff32354 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0653c12561ca3b54f2778c164e5baf6e83212cad | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/11c647b62200349a6200a46809f5ef14359be869 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ae171f97b88e1998e6ac0fd776024e73a733ae7b | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/95207cd6f6c44e4e7663b2887dc610db31412da3 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/893f4a9229fcf4ab9b0238a15a67b23487db5bc7 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/7e941e7938cb8577867f07eac6106bb35db99cf7 | powerpc | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/5c266344a524222e561f79cb8fc25e9a1734afc8 | armeb | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/a61dc7d217cbd382bf381f818755e5c9fc8d6709 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/dcee1304f497f8ebc346cb1deb415ca0666e68ae | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a5b0c8581a05d4ff6044feddef2414766ad7ba7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/34731d961899a17ba75873d982943466974a2367 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/028c34b0f780867ccc569800ed550e9cbcf800b4 | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a0d1f917785f383508bd5c7007c8450c54ae3803 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/1adb3303ac36fd8f7b5d07f766dd286744237307 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f846f77b6ad70f7921e4ca4f4b69a9c09d37d67 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e7b2eef6a9dac294a26f147ea9a32f0150480148 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4b0a9eb126d10bb80f7473de96ac66394db4c4ea | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6d62d8b978e53aa38e303928058694e9187a1b95 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/52ae4ee1180b4060a823f15a61eab0c664d9a142 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/077791bc4c92148c0407808574997b1e88da2fff | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/590c993f24d4dc1c59e88e33d781e864d9e3c9df | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/99b3625d0b67004f13742c68e8753fdd8155b973 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08c84f0fd867157c4398e45b4863d995f9f489e8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/82b2f6dbcf997d64c6cc650b38534b22292fdc4d | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/76a2cf0b6d4a999a930d245f88d5daf52c7725b9 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/85df4ee78aea9f14b03aeca54598f581e480bb76 | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/6bca5dbdad5735ea2e704fcbda3289cd5d8d3802 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/bc7486df309175230ed43f321ed40bd1d6912155 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/a50b39978236b8588c31c75840ddf4a0c9667c4f | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8c0fb570519df8a8af115d0797a688629417b160 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/45f652838c1de8b1cad7217a5783b03197b857ef | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8108187ff009f615820830e35cdb356dbe93bbe4 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c6a8faec7b59ecfeeacff801d0c4691d1bf97eed | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/a4a24306e93f9c8d6654e38d202b66f72a4d8e09 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3646102b8094669c9305b2338bbfdf436f028033 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6fdb549741222afa4f4b087f087253a56a2e2c96 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0907fe371efa7572b66a29d2b8293a0b6d869994 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6b40c68f63e2688a3730301201ab208df1687f84 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4fb65a4b44f23bca3eea6c1b73818786493c4fd9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ac3888d5e9f205541ee87f42b55189c420d3c031 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4fcbed6379204d3c87e423787b4358b0f9c26d8a | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/430134dd47351f6894328484f94f5e4e3e55a886 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/06d485a6bc88d88feef3baebed769fb12c606365 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e868f4161f49f0b50fb76495518067f6ad99cefa | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/303f18d126f4bf7138ba087cba2e2100c0a1f061 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c028a39a42d6971157bcae5ca906d9a9dd8b1066 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/419d2b7139fde8dc23b97cc35587c7b1a908ea22 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a4553de37421a74eb09d13cc8018b739e2b0522 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e980f26e1b4393292d29ffc9f99d3f73e8e06ad4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b427c953f40a0469463eb61a1ce16f82393638a | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d5f78c4883114474498cd9bc405798d1f0a37a38 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e2542e702cce1edc8e9f44902ac2d8c9b769b386 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/05ed7648480add94c831c315b7c04de46cff8468 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/5724b27d7287b0ab45bf761827d28b9fb09d0507 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/3b4b47c6e7b14117045a219ffb55ff760f1d3158 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/7dbdbfea8c6fecd384f6649372fb238d31b8f965 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/faa840690060f3ac79b424497e4db9fd37e3a75d | powerpc64 | host-gdb-11.2 | NOK | http://autobuild.buildroot.net/results/0565e2e83765fe3f46e33d27a1a901252c5e8f0b | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/88f7c23c5158c6a86c680be19179f1d5eb4411e0 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/36f2cf3408937a4e99bad839dfc0d735773787f5 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/19f51b9e0a2cd2621231b9bf036a7396e8e51de1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6bee4746b469506cf535c76599beb31309a88062 | x86_64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/fa6e8c237c64b05cb5be5dff190afa2998a58d74 | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/0884a5fb3d82f827213de77bf456b2ff5cf14497 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c743ca4421f377018782b6163dc2304d7eabde76 | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/07cd0a5e8f2e83c5942d6cc3a1d0fa360f00810a | mips64 | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3e489377da8be9d8068bf05d0469264f780d45bf | or1k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9ef8e840b02a608f8433e08e723aef7bb0080228 | arceb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/8dfbcd6b80240b00fc5d44d01a19bddd89afd778 | m68k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/35d625b4c966dc9ed3946dada1f379b8175494f5 | mips64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/31043a781b85068d6d2f3c729c6504e5cf35ad32 | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/6580d2523420b6e5b25a716a0c268ffdf976b66c | powerpc64le | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/4a2a780bc0b38b272b1e3ae1cf08e0cceeae9dc4 | mips64el | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/22215a2beb0f99bb1b4d759299c4c98e6dd86ba3 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/8eda7f975b303326eaf0c9fb3e27f6237da57caa | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/8c2bca10e06aa84d268ce71333ab6ad1c1442fea | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/e86ef41b4cb381d0d296716e94fed0884f5976b5 | ORPH microblazeel | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/89377908f0cfc83462daabd944e79ebce5a68bd1 | s390x | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/45bebe20265f5fb6f84c3c8bfedb2e13617a77a2 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/97468cd4e682f8ccded7e026b8823fe57232e3d3 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e55bb7db9a1d13fecfa28a9c789dfaf26c44011a | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7608a05d969f0775e05466264e8b7f60548240d2 | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b63f811bb9c071ccbac1b9143694b732742ac94a | sh4a | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ae8134fc8179d078850464c77293ebaf00bd1c2c | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d940df1c4b4ee469752a7e6a8088ef980547bb8c | or1k | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/2f7ab080a4bb514f89193b81f390ad1c73d391bf | ORPH sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/3178de2f73c58b5e5c33eca0727702b7dad7e69a | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/4adf3c105dbeb0644326d15225e3d94c217f0bf4 | mips64 | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/f4f65dbd210ca05bb4f5380e3f3c61359821e6c8 | riscv64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8cc34926c6266d94234c60149ca0c0678223245f | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0a14e7920b9c377d8dea48893186a71d3f57b9f4 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/385d320965431aaf11ce564e517435c5696d57c9 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d10b280cdd27a453294e5382afeafc1542fa2838 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1050f9bd33ed688c8b88f8e30aebce9e9c89ed99 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/13a958ffe26c4de0f3c913a3d425e0409cea0575 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4495b8d430c085a238b2d026ba705c02b589e564 | arm | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/6e7b3d1eaba53d86102be03f0e387e1a3b2b581e | mips64 | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/d5df5440ee47e9cf1a252493aa05ca0514bcef53 | ORPH sparc | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/aea45077c408a776fa56614535b597457862fabd | ORPH aarch64_be | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/343eeaa56842598c133fac5d239b2ec3a5a2a820 | ORPH m68k | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/e0d4bf9598f99f2be49716a5ca6bc8140507dbe8 | ORPH microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/2559a2408b1d7667ba4a1f7e5c7b59b67c0621d9 | sparc64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/2f93976bac947d2aadf742ff98dead5fbcbb7250 | armeb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/793e0c9c45935b238f022cacf319e7568b934a59 | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/0e479f90648f8527c65565fce83fd015d7c5d642 | ORPH or1k | libgeos-3.11.0 | NOK | http://autobuild.buildroot.net/results/4effc1ece7fad93f877da57fc5465b4e4aae8d2a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1792f96288c90804446195805558bf712d1e4a30 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c802f43f1ad119a40fea941962a08bf2ab01cd69 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/daed23ea431589544f80212b546b8a97fd95ec34 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b7ec3bd46706348d9b5cf6711d880a77246ce5df | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6956aac37ea6e541a4ae10e3ceb2311cfe7e6e56 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/21de4a1e3807d10a7acfa0d78a8a20f2c8fad726 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/d05817086837a831f4c145221c6932dac40ace4d | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f2bf51938dcaa4d666053a4ec1e03ee6ef58d63e | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/3efb63819fe2a06d6ee6ca2516f7520f0ff486e9 | ORPH powerpc64le | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/d11924517ebf5e1321c25b087744392f4f08221a | ORPH microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c760eef1f27c79f14256f16c1df561585db7f81b | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b8e1f86197363231cd6152c88bacf97b10caa105 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1a6faa5b68e25b7e567581e06a25c1d1f7a2e064 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c8208cf000d530f0c112c2dd9ac2331aa47d96a0 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6425a34d7448a181a33672895496af4129c1905c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/94252cc588c0450408a7dde38dee7a835673bc84 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a615fe8dbabf631d0246401c85e9ea748a62944c | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d937ca56b04dc4a94c5dc0912f8132cd12b8616 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/93564ac1a44a556fed87e2e49e6da3b9d1e892ac | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/207dda914235ff80528b89589bbf1dc2387a024d | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/836a74b128cefb66158b99c23e9ff2bb0215531b | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8e8821555dbcb043f20a087d32a501df69d32e1e | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/adcc15f6f63985485f575460b56d2bbae6012a8e | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/dfb95cc5ea231650ff8a9b6feace9c4a213d0e16 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1068abc701bdabfe1ed1a2a995401cb5f7e9c80b | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7f8f0a45983416e5f2be04996df1d15af448cc98 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0fab09b8bd174a431fda0119e1f69134ce6ac287 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/744f0efbbd719aebc28dec352f1458f7fd69d538 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a7d1a8124512439254fabe9c7cfeaebf74bb92af | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5fc27b7396682853dff568ef13c33eebf76b7c2b | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3edd92edfa5abc0d6e094fd97df67d9d472c131d | s390x | libostree-2022.6 | NOK | http://autobuild.buildroot.net/results/5d95e1f7b61deef2d2b11a2005256b93aa1ced3f | powerpc64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/16b12ac139f04afd95b9e291f5d183da668cbfbe | ORPH or1k | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/14ed49d25575f6b18ef55fba585d3094910a76f5 | ORPH arceb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/33b3da8a2eb9d44a98f94a164a1c532c972ffddb | ORPH armeb | libxml2-2.10.2 | NOK | http://autobuild.buildroot.net/results/7f8afa1e12a1fbe53d945ae3ab3774281a491c5a | powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/284db159cdec75d5f36f1d5b3c9675a7a0525f06 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/478e807a667367b8d39f1aade09d963117593f8d | ORPH xtensa | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/85282c977b3034df8bf3a6f2cc98f93765772640 | ORPH microblazeel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/b90a180c2c8704dd9c69d47e09916061ebace6dd | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a69e94bef4cd044835d1cb9a5a4e8cf99e6916ae | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3f6678a942a32a033c2b257536b4e7bb3063ef1e | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bcbcd82623d496a3790c0b7f5c53f8ea93a64b94 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d53586179b98aa4b867f53259fe6791eac4bb8d4 | ORPH sparc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/534792f273a8092d8028ebe3c27be03c0218aa4d | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/175bd208fca11463ab725a2f93dc648d7c41fd0c | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f8441f070e49091c07d342f536d6837a42eb7510 | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/54a7f6ef2f2c074ca5b2481ec1ce0d8aedc1ac60 | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/20d26a5cbd3c602bb003aad32c941ec477fb703a | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d6876cce1cbe16d2822a64b02d7b6bf7fa940620 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/88680de17ae5607562503e894eb8b381185b255e | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/83bb72afb0eb07484ac7189cf644fa82cb144e67 | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/94be962ffe5ee0f282f12d06d1ecadc217724813 | ORPH xtensa | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/d52367f55d19c3b50844ab07f19b2024d4d21a8e | arceb | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/4351a58bb1b6ca428aff56b10ef7cc663fc51852 | or1k | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/5eab737e19d2a238de82d61e770407b061fd10ab | mips64el | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/f88f3818f7eb345f870744e1f7f54da165c1298e | mips64el | moarvm-2022.06 | NOK | http://autobuild.buildroot.net/results/fadf7afdf7928ae7da702b1d1eb60dd358637a02 | sh4a | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/a186488ecd046cab3ba587ff4a12ce8ff983c809 | xtensa | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a33bc0a3f360714c820446480fd74cf861b7554e | ORPH sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/dd873dae8ad6e04ea522643d6af8aaa404838d58 | ORPH or1k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/660554c5466c74efb5efcc4de17e5af31c9def9d | ORPH arceb | musepack-r475 | NOK | http://autobuild.buildroot.net/results/f36e5ccc3309ba45e8b326ae54f7bbfe41ac1adb | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a83b1a14a32b8afa4191de954da36db3b6f489e7 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/823d1a683b7509226ab1a6a2457696a23ea8438d | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/0c91ac6a30b5114553820988b5d852769d7138b7 | ORPH powerpc64 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/ee67bba638858cf090aac0b295cb89e236b8645b | s390x | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/965e4f9e99f525669d8684c5aa75c013f0814200 | sparc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/4bc065c9f83c5305232c99ced142ca906fe021fc | arm | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/709ab9d18cbbe7af81aac18c6e2dc01b430c25ed | sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4b91941c505ae9296f80e010ea9597b5be5bc4aa | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c52034d854b7fa4bf611ec975bb71128745612a9 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e67d91dcd40af15642d83da853e916f450cef68b | ORPH riscv64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/a33e37386d227777f69f3fb9d99fa988cf608798 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ba8f3082e074a91703802568f992e863e9743967 | ORPH mipsel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/14c42121577bd188831e8fe8d3d86ae25ce8e8d4 | ORPH arm | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/59902e15207a5051d6ce8a3b865f4ab4b3fc696c | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/179fcf524cb1a679b278d01e4bae8dc1368dc831 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/25dc120adbab159ea9d421b79ae78d5669d99bf4 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/2d2990c93cabe9e36bb09f26dfad74aa2c659b2f | ORPH or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/3359e67d345ac608b8e344b730eb96924b058ebb | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/0cf3ffbecedc452f8d6dad51d85093926ab91d69 | ORPH aarch64_be | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/806b3b4368ae51d5a8e193a36102c2d4fcdc8e2f | aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/60bdecd0f3759c2e4cc391347c6423f13e2af89f | sparc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/b2ce3088e1aa2a2fc7b760e3042f60b31afd69a9 | arceb | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/b07996dc095e012de819d6768b91468f2d03b68a | riscv64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/af92f15f61f03b5c934eac6bd97d03dbffa60532 | arm | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/3265b665e22883c95d1071c568f8bc0600328e2d | powerpc64le | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/8694cce57cf2f8dcced580ffe52111573e9a71c4 | sparc64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/5e5da157df8531e37827536e832fd98de26fa6a4 | nios2 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/58990fbb7cfe25a56abbe6fabf43c062b31decf7 | sparc64 | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/71d032e02970cfbed7eee1d8c4aac4b2ce77460f | ORPH i686 | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/f4f79953d10ed127820003fdf4e0b064ead906ab | ORPH sh4eb | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/1be5f018082b1442876e053fdbbedd53833fcb64 | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/825f99fc51d1d8dc18af735e75d8a4606a2fca38 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/1a54538df3b2b36defa878f42d801873ea8d9cf8 | ORPH powerpc64 | python-greenlet-1.1.2 | NOK | http://autobuild.buildroot.net/results/b4287b4590a62d7dcbd23f48414ffd51c5fa1bcf | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/b5bc0644e132040cc9c374f6ec4a1f20d2fcfc2e | x86_64 | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/b02651bcc1ffd01e1dc118775eff70547245abcc | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/39cf727e1f6b93d2e0a3e46b37a30fb95778ad78 | mipsel | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/75c3eee4da408e202b99b479009c2f33bd5ff8dc | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/141ca9a77d5acd92b8cbe0ca84a811dde73e7335 | mips64el | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/13f15f229b1bca684c84755d7e0501c68dd2c0b6 | sparc | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/550640296a92826f6f04d2344adde75c3025ea35 | mipsel | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/c617ae1c5f2f0754e77a4d2575138b3102df4268 | riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/2e09eaaff9c9fbf26e9f7d77b04c978fb6691e58 | ORPH mips64el | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/aa7cd8f1de98b0b203a98ee0db922d28bc2c9e39 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f070e85ab15343a56306ca294b9f591d113c3f3e | ORPH x86_64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/df70eeb89ba25dc975d928035c151ceb90ee8248 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ebf4c4bdb3c1bfabf8d3e9ceaa34f2b666d5a028 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/10cd40618e4e41ea45a2e9abba56e2a1b0145ade | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/eef4af5f346261d9089c4b8047b76fe69222adc7 | ORPH arm | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/abf42d5afe25fb2ec967d0ff2c4b0d5a2f8f6bc9 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2d9c6836699f2ea40f069cb2d316ebf3bb252ac4 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/70ace42f0f74d0d582b057954332b5764d53db3f | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ab0582e5c2c1fab9bbe506145fed689167f1d710 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7f88f4b70cd1bedb217eeff41aadc4205c55f6d4 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/711d56560225d86fa253722ad40efa50da307d1b | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/465fd5a87e01a7db391fc42e58606a8a7e9fed17 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a019ed89d80cf6965b01bb6ab90fd1474d2aca87 | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/087d973909653860f1e3f64bbe0fadceb19cb171 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4fed79016e15cc80fdfc7b25c10355b987ac8ec3 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f9cb464d4cd1a9aa1af906c3cbb1cba7b8909063 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/331c311b35f4bc3a9a974e6c0fc1287c71b6923e | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7f0abfcc4370f84cc507f341646a8db1996299de | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3cab2b2e0c694a43b960c7e6b05f046e5af25db0 | ORPH sh4 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/86258830ae0ebacd40cce88b480da382d496e93b | ORPH x86_64 | spice-0.15.0 | NOK | http://autobuild.buildroot.net/results/273eadf9e49af55e0932a8293ca65762fb43114f | armeb | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/bd2d6413904a8be1085a165f092cbaabf6c0f0b8 | sparc64 | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/0bb069685d1d1f3604c07023f35c64b8adbc0e85 | mips64el | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/e745a2f2dfd8d06df5a0dcc4c6c69534f67c4989 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/042b9933baec07475124e2e103d83ad69b245fd2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1434682911f27fca4ba77bf8a91630d392a7ab27 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9a22059ebd2a89a103ef2c960353f80dbe5ad3f6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/49c945a24b90f1b04a24b2b0d342ebef36f48041 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/840fc22d0a3073cfa23c7d1596bb80fdd8f6e747 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b885410e7f663bd92e5cc6116edf8f352e2ad2c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/507c617c54b3aaa28ed4fb3135eae647dd52f2d6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/54b78b6baf8f1692f5b3e45b2445c1098e8af9a2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/835cc6facebee721cff05c8e570b992924bd56e7 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4fafacc9312ac4546f3536af46f12fdc559f7729 | mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/425a8df3a8d83dc24f9f0906cabda68864eb1aeb | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cde5936275788113d3b12817f192b2b5e6aeba98 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c9c30183eb762966e4c1a1d03a7c2bc799bfc083 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a6bcb4308f18dc8272aa9087843cdfb5c1131016 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/84541dbdbe7dd0f082ff31f62f5f9172d0b01b16 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2554c34e8e3e94636e2285a3a2f784101c38fc5e | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/00ce3ebd308f48da4372b7f664a28de7d06489c7 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/98be4625075fa205ed6c28c9bdac4d39fb4da70a | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/50d277575b7047ac09d60305460a4ae47fddeeae | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fd9c7f52ea23bf362831d8bcddd846c28c398c2c | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3acf0bdf979ccbcdd5bb17e905fa76969801789b | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/e0941302b7b6d2bfc19c55097e8db5e033a7d808 | powerpc64le | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/87cfb25dacc68532dc1d542d33b654462a45c0c4 | mipsel | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7d13ee95a8ea0b8130769b8d5d74444360beff6b | sh4a | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/b65e2f76840b1ef7b1398b0e1e1e728ea657adf7 | mips | unknown | NOK | http://autobuild.buildroot.net/results/90505d075baafc3b57fb6a6a7bd26ff98f6d1969 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/b2559aeecc8add076dbfa6bb321c9d6437dcc410 | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/45f7b431a038c065850495cd5012d209eba8f1eb | mips64 | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/6c60ce857d54e326ee2ffcf67ee176fc102b2d00 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4575498d4108cd2256ed798ddc7527d2c10d445f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/33823e6f9cd3c1466302f16a5b45fc3683b05560 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7a1836c5a13d3e5e317593c52de4bad974f16f79 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6f1a2f25cb8223c0faec228a160663fd5083896e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/14c3ed64bfbb1e96d0298ca2ae9f2e3d07c3c596 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/399a237d06e01c9332bd7e06612aa07aba7f534a | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/44ce7c0b0bf9b8dad435cf206b7dbe405dd9c968 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/5995456a1f4e0a303f4a10fa85de078ae479912d | ORPH mips64el | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/a2c066a4dc2c8b54ab0e17aac39bf1f2c957fc40 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/fbf194c242a648949c9043aed998d1387cd23c4e | aarch64 | zeromq-4.3.4 | NOK | http://autobuild.buildroot.net/results/df46cd40b3e30808ffc0bc4464c1d13c5fb079cb | Classification of failures by reason for 2022.02.x -------------------------------------------------- frr-8.1 | 1 igd2-for-linux-2.1 | 1 poppler-21.12.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | frr-8.1 | NOK | http://autobuild.buildroot.net/results/6f4f89587266afc8d90fd2c1b58a9f6017e00ad0 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bf1724ee2537928bc24d3e4ef2f7e5d528bfeb3 | xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/c55dc9daa4ed9137e544a3f2373e2441f5c643b8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 3 host-rust-1.62.0 | 3 ding-libs-0.6.2 | 1 dmalloc-5.6.5 | 1 host-go-1.18.6 | 1 ntpsec-1_2_1 | 1 openssh-legal-info | 1 unknown | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/98b4167a46c405b2988b20f37646d8d45c45850d | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/0b3be2087b4e6a77407ca662b6cca013800a41e6 | ORPH aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ae54578edd76c3ee9b1d623b0edc5eac4e0824d1 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dd62547108b292e8fad7712d95edd99b6ca8b487 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/018d74a5eaf825e2030b1bc7c331a5e3f75052a9 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/f0f412509d7d09d770f6dfcaa26107f0bf4a6ed1 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/aededc7ca86c01d8edc7ef5162c4b0c5820e515b | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a5657f692ed9b7308750b243f438a2ce5d24295e | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/b0015fc36797537af87d0eb01b6c5f47cc53a727 | microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/3a57d5ea32901832bb1ccaf78a72e4daed0a1ef1 | ORPH arc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4443ae93a17a38917d458e1d2ca56213ee4515d3 | ORPH microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/dbcf96949f641b97d3965d3b2963fecdee14d43b | mips64el | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/af2ad48c96aa5ecd9fe8d97c18466a288a203a8c | ORPH Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.1 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.2 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.18 | 20.10.19 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.18 | 20.10.19 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH easy-rsa | DISTRO | https://release-monitoring.org/project/17770 | 3.1.0 | 3.1.1 | edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.34 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | freeswitch | DISTRO | https://release-monitoring.org/project/21436 | 1.10.7 | 1.10.8 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.0 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.49.1 | 1.50.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-50 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-gmmlib | DISTRO | https://release-monitoring.org/project/20342 | 22.2.0 | 22.2.1 | intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.25.0 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.15 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libosip2 | DISTRO | https://release-monitoring.org/project/15135 | 5.3.0 | 5.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libunistring | DISTRO | https://release-monitoring.org/project/01747 | 1.0 | 1.1 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libva | DISTRO | https://release-monitoring.org/project/01752 | 2.15.0 | 2.16.0 | libva-utils | DISTRO | https://release-monitoring.org/project/16334 | 2.15.0 | 2.16.0 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | libzlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | ORPH lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.1 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.1 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | minizip-zlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.11.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+19 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.41 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.1.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.0 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.91 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.91 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-distro | DISTRO | https://release-monitoring.org/project/12202 | 1.7.0 | 1.8.0 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3.post0 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.14.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pydyf | DISTRO | https://release-monitoring.org/project/179112 | 0.3.0 | 0.5.0 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.2 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.10 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b1 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | python3 | DISTRO | https://release-monitoring.org/project/13254 | 3.10.7 | 3.10.8 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.1 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.1 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0709 | 9.0.0771 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.231 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 374 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus | CVE-2022-42010 | https://security-tracker.debian.org/tracker/CVE-2022-42010 dbus | CVE-2022-42011 | https://security-tracker.debian.org/tracker/CVE-2022-42011 dbus | CVE-2022-42012 | https://security-tracker.debian.org/tracker/CVE-2022-42012 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freerdp | CVE-2022-39282 | https://security-tracker.debian.org/tracker/CVE-2022-39282 freerdp | CVE-2022-39283 | https://security-tracker.debian.org/tracker/CVE-2022-39283 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus | CVE-2022-42010 | https://security-tracker.debian.org/tracker/CVE-2022-42010 dbus | CVE-2022-42011 | https://security-tracker.debian.org/tracker/CVE-2022-42011 dbus | CVE-2022-42012 | https://security-tracker.debian.org/tracker/CVE-2022-42012 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 freerdp | CVE-2022-39282 | https://security-tracker.debian.org/tracker/CVE-2022-39282 freerdp | CVE-2022-39283 | https://security-tracker.debian.org/tracker/CVE-2022-39283 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From luca.ceresoli at bootlin.com Mon Oct 17 07:39:53 2022 From: luca.ceresoli at bootlin.com (luca.ceresoli at bootlin.com) Date: Mon, 17 Oct 2022 09:39:53 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package Message-ID: <20221017073953.510219-1-luca.ceresoli@bootlin.com> From: Luca Ceresoli This package fails building with a kernel >= 6.0 [0] due to internal API changes [1]: .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? 709 | roam_info.channel = notify_channel; | ^ ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? 710 | roam_info.bssid = cur_network->network.MacAddress; | ^ There is currently no fix in the github repository, and it's probably not worth fixing because, as the Config.in help text states: This is needed only for Linux kernels before 3.12. Since 3.12, there is a (staging) driver in mainline, with a similar codebase. Kernel 3.12 is 9 years old now, and the oldest kernel currently supported is 4.9. [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d Cc: TIAN Yuanhao Cc: Petr Vorel Cc: Peter Seiderer Cc: Heiko Thiery Cc: William Wennerstr?m Cc: Ezequiel Garcia Cc: Bernd Kuhls Signed-off-by: Luca Ceresoli --- DEVELOPERS | 1 - package/Config.in | 1 - package/rtl8188eu/Config.in | 21 --------------------- package/rtl8188eu/rtl8188eu.hash | 3 --- package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- 5 files changed, 54 deletions(-) delete mode 100644 package/rtl8188eu/Config.in delete mode 100644 package/rtl8188eu/rtl8188eu.hash delete mode 100644 package/rtl8188eu/rtl8188eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef3d..b1e84edd5e9a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1810,7 +1810,6 @@ F: package/agentpp/ F: package/exim/ F: package/libpjsip/ F: package/qpid-proton/ -F: package/rtl8188eu/ F: package/snmppp/ F: package/stm32flash/ F: package/unzip/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97d3..d95a6ac4e3fb 100644 --- a/package/Config.in +++ b/package/Config.in @@ -573,7 +573,6 @@ endmenu source "package/rpi-userland/Config.in" source "package/rs485conf/Config.in" source "package/rtc-tools/Config.in" - source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" source "package/rtl8723bu/Config.in" diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in deleted file mode 100644 index 76d90852976a..000000000000 --- a/package/rtl8188eu/Config.in +++ /dev/null @@ -1,21 +0,0 @@ -config BR2_PACKAGE_RTL8188EU - bool "rtl8188eu" - depends on !BR2_s390x - depends on BR2_LINUX_KERNEL - help - A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. - - Make sure your target kernel has the CONFIG_WIRELESS_EXT - config option enabled. - - Note: this package needs a firmware loading mechanism to load - the binary blob for the chip to work. - - https://github.com/lwfinger/rtl8188eu - -comment "rtl8188eu needs a Linux kernel to be built" - depends on !BR2_s390x - depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash deleted file mode 100644 index 9c7f2de4b61e..000000000000 --- a/package/rtl8188eu/rtl8188eu.hash +++ /dev/null @@ -1,3 +0,0 @@ -# Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk deleted file mode 100644 index ebce4617ac5c..000000000000 --- a/package/rtl8188eu/rtl8188eu.mk +++ /dev/null @@ -1,28 +0,0 @@ -################################################################################ -# -# rtl8188eu -# -################################################################################ - -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) -RTL8188EU_LICENSE_FILES = COPYING -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m - -define RTL8188EU_LINUX_CONFIG_FIXUPS - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) -endef - -define RTL8188EU_INSTALL_FIRMWARE - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin -endef -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE - -$(eval $(kernel-module)) -$(eval $(generic-package)) -- 2.34.1 From bugzilla at busybox.net Mon Oct 17 07:43:39 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 17 Oct 2022 07:43:39 +0000 Subject: [Buildroot] [Bug 15061] New: Node.js Package fails to build against musl i386 Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 Bug ID: 15061 Summary: Node.js Package fails to build against musl i386 Product: buildroot Version: 2022.08 Hardware: All OS: Linux Status: NEW Severity: normal Priority: P5 Component: Other Assignee: unassigned at buildroot.uclibc.org Reporter: hello.skyclo at gmail.com CC: buildroot at uclibc.org Target Milestone: --- Hello, I have been trying to build the Nodejs package against musl for a i386 Pentium3 target. Nodejs has an unofficial build for musl (x64) and for x86 (gcc), however there is no unofficial build for x86 musl. I assume it's possible to build against musl-i386. I built nodejs against uClibc-ng i386 on the exact same machine months ago, however now that doesn't work either. For reference, my system uses glibc x64 and does not contain a musl i386 linker (since Ubuntu no longer supports i386). The full output of make is attached here along with the defconfig (for reprod.): https://gist.github.com/Skyclo/4168deaa1a73be8574d43eb70a4d9de1 The ninja build seems to fail consistently when doing anything related to "obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h". It produces the following output before eventually crashing the make job queue: >> [218/2653] ACTION generate_bytecode_builtins_list: generate_bytecode_builtins_list_action_3931b343a4cb0bd98da4e581f6ce90fe >> FAILED: obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h >> cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h >> qemu-i386: Could not open '/lib/ld-musl-i386.so.1': No such file or directory Return code is 255 Getting the file info from "./output/target/lib/ld-musl-i386.so.1" returns the following: >> ./output/target/lib/ld-musl-i386.so.1: broken symbolic link to /lib/libc.so I'm unsure if that is what is causing my issues. From what I can tell, the qemu wrapper should be able to resolve that symlink to the one found under the target's lib. I do not believe that my issue is related to Bug 14936 nor Bug 14366. I have not had time to see if the patch available at https://patchwork.ozlabs.org/project/buildroot/patch/20220809075704.86472-4-ardeleanalex at gmail.com/ works for my specific case. Thanks for any help in advance! -- You are receiving this mail because: You are on the CC list for the bug. From andrea.ricchi at amarulasolutions.com Mon Oct 17 07:43:51 2022 From: andrea.ricchi at amarulasolutions.com (Andrea Ricchi) Date: Mon, 17 Oct 2022 09:43:51 +0200 Subject: [Buildroot] [PATCH v3] package/cutekeyboard: new package In-Reply-To: <20221016175025.22545-1-angelo@amarulasolutions.com> References: <20221016175025.22545-1-angelo@amarulasolutions.com> Message-ID: Acked-by: Andrea Ricchi On Sun, Oct 16, 2022 at 7:50 PM Angelo Compagnucci < angelo at amarulasolutions.com> wrote: > CuteKeyboard is a Qt virtual keyboard plugin for embedded applications > > Signed-off-by: Angelo Compagnucci > --- > v2: > * bump to verison v1.0.1 > v3: > * Adding me to developers file > > DEVELOPERS | 1 + > package/Config.in | 1 + > package/cutekeyboard/Config.in | 18 ++++++++++++++++++ > package/cutekeyboard/cutekeyboard.hash | 3 +++ > package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ > 5 files changed, 41 insertions(+) > create mode 100644 package/cutekeyboard/Config.in > create mode 100644 package/cutekeyboard/cutekeyboard.hash > create mode 100644 package/cutekeyboard/cutekeyboard.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..4640abe3b2 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -158,6 +158,7 @@ F: package/apparmor/ > F: package/corkscrew/ > F: package/cups/ > F: package/cups-filters/ > +F: package/cutekeyboard/ > F: package/fail2ban/ > F: package/grep/ > F: package/htpdate/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..f11210d313 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1522,6 +1522,7 @@ menu "Graphics" > source "package/cairo/Config.in" > source "package/cairomm/Config.in" > source "package/chipmunk/Config.in" > + source "package/cutekeyboard/Config.in" > source "package/exempi/Config.in" > source "package/exiv2/Config.in" > source "package/fltk/Config.in" > diff --git a/package/cutekeyboard/Config.in > b/package/cutekeyboard/Config.in > new file mode 100644 > index 0000000000..389c583313 > --- /dev/null > +++ b/package/cutekeyboard/Config.in > @@ -0,0 +1,18 @@ > +config BR2_PACKAGE_CUTEKEYBOARD > + bool "cutekeyboard" > + depends on BR2_PACKAGE_QT5DECLARATIVE > + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK > + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 > + help > + CuteKeyboard is a Qt virtual keyboard plugin for embedded > applications. > + > + https://amarula.github.io/cutekeyboard/ > + > +if BR2_PACKAGE_CUTEKEYBOARD > + > +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES > + bool "cutekeyboard example" > + help > + Compile also application example > + > +endif > diff --git a/package/cutekeyboard/cutekeyboard.hash > b/package/cutekeyboard/cutekeyboard.hash > new file mode 100644 > index 0000000000..4720d7ec40 > --- /dev/null > +++ b/package/cutekeyboard/cutekeyboard.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f > cutekeyboard-v1.0.1.tar.gz > +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d > LICENSE > diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/ > cutekeyboard.mk > new file mode 100644 > index 0000000000..b43595075a > --- /dev/null > +++ b/package/cutekeyboard/cutekeyboard.mk > @@ -0,0 +1,18 @@ > > +################################################################################ > +# > +# cutekeyboard > +# > > +################################################################################ > + > +CUTEKEYBOARD_VERSION = v1.0.1 > +CUTEKEYBOARD_SITE = $(call > github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) > +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 > +CUTEKEYBOARD_INSTALL_STAGING = YES > +CUTEKEYBOARD_LICENSE = MIT > +CUTEKEYBOARD_LICENSE_FILES = LICENSE > + > +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) > +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES > +endif > + > +$(eval $(qmake-package)) > -- > 2.34.1 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jesseevg at gmail.com Mon Oct 17 07:48:04 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Mon, 17 Oct 2022 09:48:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6/qt6serialbus: new package Message-ID: <20221017074804.717851-1-jesseevg@gmail.com> The min. header check for canfd was also ported but to me it does not seems necessary anymore, though I can't say this for this sure, please feel free to drop these lines from this patch if that is the case. Signed-off-by: Jesse Van Gavere --- package/qt6/Config.in | 1 + package/qt6/qt6serialbus/Config.in | 14 ++++++++ package/qt6/qt6serialbus/qt6serialbus.hash | 11 +++++++ package/qt6/qt6serialbus/qt6serialbus.mk | 37 ++++++++++++++++++++++ 4 files changed, 63 insertions(+) create mode 100644 package/qt6/qt6serialbus/Config.in create mode 100644 package/qt6/qt6serialbus/qt6serialbus.hash create mode 100644 package/qt6/qt6serialbus/qt6serialbus.mk diff --git a/package/qt6/Config.in b/package/qt6/Config.in index 4b2b9a1174..b0cc008df5 100644 --- a/package/qt6/Config.in +++ b/package/qt6/Config.in @@ -39,6 +39,7 @@ menuconfig BR2_PACKAGE_QT6 if BR2_PACKAGE_QT6 source "package/qt6/qt6base/Config.in" +source "package/qt6/qt6serialbus/Config.in" source "package/qt6/qt6serialport/Config.in" endif diff --git a/package/qt6/qt6serialbus/Config.in b/package/qt6/qt6serialbus/Config.in new file mode 100644 index 0000000000..e0b2b937b3 --- /dev/null +++ b/package/qt6/qt6serialbus/Config.in @@ -0,0 +1,14 @@ +config BR2_PACKAGE_QT6SERIALBUS + bool "qt6serialbus" + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6 # CAN FD + select BR2_PACKAGE_QT6SERIALPORT + help + Qt is a cross-platform application and UI framework for + developers using C++. + + This package corresponds to the qt6serialbus module. + + https://doc.qt.io/qt-6/qtserialbus-index.html + +comment "qt6serialbus needs headers >= 3.6" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6 diff --git a/package/qt6/qt6serialbus/qt6serialbus.hash b/package/qt6/qt6serialbus/qt6serialbus.hash new file mode 100644 index 0000000000..57b68f47e8 --- /dev/null +++ b/package/qt6/qt6serialbus/qt6serialbus.hash @@ -0,0 +1,11 @@ +# Downloaded from https://download.qt.io/archive/qt/6.4/6.4.0/submodules/qtserialbus-everywhere-src-6.4.0.tar.xz.sha256 +sha256 efca55677c12085a85b6c0e0f401332922ebc8226b18b7fc9bb9c0d48549ea91 qtserialbus-everywhere-src-6.4.0.tar.xz + +# Hashes for license files: +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialbus/qt6serialbus.mk b/package/qt6/qt6serialbus/qt6serialbus.mk new file mode 100644 index 0000000000..e7cd5b764a --- /dev/null +++ b/package/qt6/qt6serialbus/qt6serialbus.mk @@ -0,0 +1,37 @@ +################################################################################ +# +# qt6serialbus +# +################################################################################ + +QT6SERIALBUS_VERSION = $(QT6_VERSION) +QT6SERIALBUS_SITE = $(QT6_SITE) +QT6SERIALBUS_SOURCE = qtserialbus-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALBUS_VERSION).tar.xz +QT6SERIALBUS_INSTALL_STAGING = YES +QT6SERIALBUS_SUPPORTS_IN_SOURCE_BUILD = NO +QT6SERIALBUS_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0, GFDL-1.3 no invariants (docs) +QT6SERIALBUS_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt + +QT6SERIALBUS_CONF_OPTS = \ + -GNinja \ + -DQT_HOST_PATH=$(HOST_DIR) \ + -DBUILD_WITH_PCH=OFF \ + -DQT_BUILD_EXAMPLES=OFF \ + -DQT_BUILD_TESTS=OFF + +QT6SERIALBUS_DEPENDENCIES = \ + qt6serialport + +define QT6SERIALBUS_BUILD_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --build $(QT6SERIALBUS_BUILDDIR) +endef + +define QT6SERIALBUS_INSTALL_STAGING_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --install $(QT6SERIALBUS_BUILDDIR) --prefix $(STAGING_DIR)/usr +endef + +define QT6SERIALBUS_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --install $(QT6SERIALBUS_BUILDDIR) --prefix $(TARGET_DIR)/usr +endef + +$(eval $(cmake-package)) -- 2.34.1 From br015 at umbiko.net Mon Oct 17 08:20:41 2022 From: br015 at umbiko.net (Andreas Ziegler) Date: Mon, 17 Oct 2022 08:20:41 +0000 Subject: [Buildroot] Help with isolinux: "No DEFAULT or UI configuration directive found!" In-Reply-To: References: Message-ID: <001c74b1a3b54786f3d62bc18d53af5a@umbiko.net> Hello Sam, On 2022-10-17 18:15, samuel ammonius wrote: > Hello everybody, > > I don't know anything about embedded systems or bootloaders or most of > the > stuff involved with buildroot. I wanted to make an installer that could > be > burned to a USB to run a graphical app that depends on Qt. I have the > dependencies and filesystem all set up, but booting the generated > iso9660 > image gives me this message: > > Booting from DVD/CD... > > ISOLINUX 6.03 ETCD Copyright (C) 1994-2014 H. Peter Anvin et al > > No DFEAULT or UI configuration directive found! Check if you have a syslinux.cfg file where isolinux can find it. The root of the ISO image would be a possible location. This file contains the boot configuration: DEFAULT linux SAY Booting from DVD/CD... LABEL linux KERNEL bzImage APPEND quiet See [1] for detailed information. This config file is system specific and not supplied by Buildroot. It would be part of your BR2_ROOTFS_OVERLAY or generated from a BR2_ROOTFS_POST_BUILD_SCRIPT. You may also need the ldlinux.c32 module (BR2_TARGET_SYSLINUX_C32). > boot: _ > > > Typing anything into the "boot" prompt just repeats the same error > message. > Does anyone know how this problem could be fixed? Try entering 'KERNEL ' (relative to root of boot device) here. > --- > Thanks, > Sam Kind regards, Andreas [1] https://wiki.syslinux.org/wiki/index.php?title=Config From peter at korsgaard.com Mon Oct 17 08:34:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:14 +0200 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:09 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <87a65uc0hl.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force > ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively > disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is > set to 0 unconditionally in make_helpers/defaults.mk, overwriting any > environment set value. So we must pass ENABLE_STACK_PROTECTOR in > MAKE_OPTS for it to be effective. But to avoid said build failure we > can't pass ENABLE_STACK_PROTECTOR=0. > Only pass ENABLE_STACK_PROTECTOR when > BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for > the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. > Cc: Dick Olsson > Cc: Sergey Matyukevich > Signed-off-by: Baruch Siach Heh, I just spent some time investigating some ATF link failures for avenger96_defconfig after we moved to glibc by default (which enables SSP support) and got to the same conclusion ;) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:14 +0200 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:09 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <87a65uc0hl.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force > ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively > disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is > set to 0 unconditionally in make_helpers/defaults.mk, overwriting any > environment set value. So we must pass ENABLE_STACK_PROTECTOR in > MAKE_OPTS for it to be effective. But to avoid said build failure we > can't pass ENABLE_STACK_PROTECTOR=0. > Only pass ENABLE_STACK_PROTECTOR when > BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for > the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. > Cc: Dick Olsson > Cc: Sergey Matyukevich > Signed-off-by: Baruch Siach Heh, I just spent some time investigating some ATF link failures for avenger96_defconfig after we moved to glibc by default (which enables SSP support) and got to the same conclusion ;) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:20 +0200 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:10 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> Message-ID: <875ygic0hf.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > The Armada target does not provide platform level support for SSP. > Fixes link failure: > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > This error does not should up on CI jobs because SSP was effectively > always disabled until the previous commit. > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:20 +0200 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:10 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> Message-ID: <875ygic0hf.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > The Armada target does not provide platform level support for SSP. > Fixes link failure: > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > This error does not should up on CI jobs because SSP was effectively > always disabled until the previous commit. > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:25 +0200 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:11 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <871qr6c0ha.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Add a patch to disable SSP. The toolchain enables SSP by default when > one of BR2_SSP_ options is enabled. But ATF code for the Marvell > platform does not provide the required low level routines. This leads to > link time failure. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:25 +0200 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:11 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <871qr6c0ha.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Add a patch to disable SSP. The toolchain enables SSP by default when > one of BR2_SSP_ options is enabled. But ATF code for the Marvell > platform does not provide the required low level routines. This leads to > link time failure. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:35:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/ffmpeg: bump version to 4.4.3 In-Reply-To: <20221016152034.1161161-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:20:34 +0200") References: <20221016152034.1161161-1-bernd.kuhls@t-online.de> Message-ID: <87wn8yalve.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Changelog: > http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:35:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:47 +0200 Subject: [Buildroot] [PATCH 1/2] package/sofia-sip: bump version to 1.13.9 In-Reply-To: <20221016152939.1162118-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:29:38 +0200") References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Message-ID: <87sfjmaluk.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:37:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:18 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 In-Reply-To: <20221016155252.1723048-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:52:52 +0200") References: <20221016155252.1723048-1-bernd.kuhls@t-online.de> Message-ID: <87k04yals1.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Fixes > - CVE-2022-31628: http://bugs.php.net/81726 > - CVE-2022-31629: http://bugs.php.net/81727 > Signed-off-by: Bernd Kuhls Committed, thanks. Is there a similar fix for the 8.0.x branch for 2022.02.x? -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:36:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:36:27 +0200 Subject: [Buildroot] [PATCH 2/2] package/freeswitch: bump version to 1.10.8 In-Reply-To: <20221016152939.1162118-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:29:39 +0200") References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> <20221016152939.1162118-2-bernd.kuhls@t-online.de> Message-ID: <87o7uaaltg.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: > https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 > Removed two patches which are included in upstream release, > renumbered remaining patch. > Removed libs/apr-util/LICENSE due to upstream removal of bundled > apr-util package. > Added fix to disable pcap detection, otherwise /usr/bin/pcap-config > can be picked-up which breaks building freeswitch. > Signed-off-by: Bernd Kuhls > --- Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:37:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/dhcp: security bump to version 4.4.3-P1 In-Reply-To: <20221016210931.54469-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 23:09:31 +0200") References: <20221016210931.54469-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfmalqw.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Corrected a reference count leak that occurs when the server builds > responses to leasequery packets. Thanks to VictorV of Cyber Kunlun > Lab for reporting the issue. > [Gitlab #253] > CVE: CVE-2022-2928 > - Corrected a memory leak that occurs when unpacking a packet that has an > FQDN option (81) that contains a label with length greater than 63 bytes. > Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. > [Gitlab #254] > CVE: CVE-2022-2929 > https://kb.isc.org/docs/cve-2022-2928 > https://kb.isc.org/docs/cve-2022-2929 > https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:38:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:38:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/libosip2: security bump to version 5.3.1 In-Reply-To: <20221016205254.13656-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 22:52:54 +0200") References: <20221016205254.13656-1-fontaine.fabrice@gmail.com> Message-ID: <87bkqaalqf.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer > overflow via the component osip_body_parse_header. > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:30:08 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:30:08 +0200 Subject: [Buildroot] [git commit] boot/arm-trusted-firmware: fix SSP support Message-ID: <20221017083837.84E3586DEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=09acc7cbc91f50305730ca0690a58fb93529034b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is set to 0 unconditionally in make_helpers/defaults.mk, overwriting any environment set value. So we must pass ENABLE_STACK_PROTECTOR in MAKE_OPTS for it to be effective. But to avoid said build failure we can't pass ENABLE_STACK_PROTECTOR=0. Only pass ENABLE_STACK_PROTECTOR when BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. Cc: Dick Olsson Cc: Sergey Matyukevich Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- boot/arm-trusted-firmware/Config.in | 4 ---- boot/arm-trusted-firmware/arm-trusted-firmware.mk | 8 ++++++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index aa571502b3..5070849d9b 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -226,10 +226,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL string - # While newer versions of TF-A support "none" as - # ENABLE_STACK_PROTECTOR value, older versions (e.g 2.0) only - # supported "0" to disable SSP. - default "0" if !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP default "default" if BR2_SSP_REGULAR default "strong" if BR2_SSP_STRONG default "all" if BR2_SSP_ALL diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 246c0699bb..34d7d80243 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -64,10 +64,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM) \ TARGET_BOARD=$(ARM_TRUSTED_FIRMWARE_TARGET_BOARD) +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ + ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) +endif + ARM_TRUSTED_FIRMWARE_MAKE_ENV += \ $(TARGET_MAKE_ENV) \ - $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") \ - ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) + $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") ifeq ($(BR2_ARM_CPU_ARMV7A),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ARM_ARCH_MAJOR=7 From peter at korsgaard.com Mon Oct 17 08:31:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:31:55 +0200 Subject: [Buildroot] [git commit] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP Message-ID: <20221017083837.8DA0B86DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9883ff708e300b93247b4463dc7dcf1681c32354 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The Armada target does not provide platform level support for SSP. Fixes link failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' This error does not show up on CI jobs because SSP was effectively always disabled until the previous commit. Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- configs/solidrun_clearfog_gt_8k_defconfig | 1 + configs/solidrun_macchiatobin_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/solidrun_clearfog_gt_8k_defconfig b/configs/solidrun_clearfog_gt_8k_defconfig index bec4a7dacc..30b1e17925 100644 --- a/configs/solidrun_clearfog_gt_8k_defconfig +++ b/configs/solidrun_clearfog_gt_8k_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y diff --git a/configs/solidrun_macchiatobin_defconfig b/configs/solidrun_macchiatobin_defconfig index 7d06313b03..f388e37163 100644 --- a/configs/solidrun_macchiatobin_defconfig +++ b/configs/solidrun_macchiatobin_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y From peter at korsgaard.com Mon Oct 17 08:35:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:37 +0200 Subject: [Buildroot] [git commit] package/sofia-sip: bump version to 1.13.9 Message-ID: <20221017083837.AC17886E13@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c33056fff080dd1795bcfb543b87e7b70ac455c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/sofia-sip/sofia-sip.hash | 2 +- package/sofia-sip/sofia-sip.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sofia-sip/sofia-sip.hash b/package/sofia-sip/sofia-sip.hash index ae2b3e725c..776136bb15 100644 --- a/package/sofia-sip/sofia-sip.hash +++ b/package/sofia-sip/sofia-sip.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 ebd006a98a7dff6e7f4d8357c5ebeee1d3bee3ac29ff213a4909e845f230fcbe sofia-sip-1.13.8-756ab9b5c9.tar.gz +sha256 daf75c41408c559c2d58a8fd4d39be4a8ff5144bc1db220d4dbc28deeed6670a sofia-sip-1.13.9-f6ee306084.tar.gz sha256 e1c0890440efe31b6cd2ee2abf895eb917c787799f079133f5809414d90d5d60 COPYING sha256 b402ae58cf355b33be8fa023f704a039e3d41ecaccd2bbcda43ca31d703e4556 COPYRIGHTS diff --git a/package/sofia-sip/sofia-sip.mk b/package/sofia-sip/sofia-sip.mk index 80e59057c4..9071d964e4 100644 --- a/package/sofia-sip/sofia-sip.mk +++ b/package/sofia-sip/sofia-sip.mk @@ -4,8 +4,8 @@ # ################################################################################ -SOFIA_SIP_VERSION = 1.13.8 -SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-756ab9b5c9.tar.gz +SOFIA_SIP_VERSION = 1.13.9 +SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-f6ee306084.tar.gz SOFIA_SIP_SITE = https://files.freeswitch.org/downloads/libs/sofia-sip SOFIA_SIP_INSTALL_STAGING = YES SOFIA_SIP_DEPENDENCIES = host-pkgconf From peter at korsgaard.com Mon Oct 17 08:32:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:32:18 +0200 Subject: [Buildroot] [git commit] boot/mv-ddr-marvell: disable SSP Message-ID: <20221017083837.996DF86DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=42d66f8fc6d4836dc08f0c75c93ce4ed35b13eee branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch to disable SSP. The toolchain enables SSP by default when one of BR2_SSP_ options is enabled. But ATF code for the Marvell platform does not provide the required low level routines. This leads to link time failure. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- .../0001-Makefile-disable-stack-protection.patch | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch new file mode 100644 index 0000000000..62b1000727 --- /dev/null +++ b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch @@ -0,0 +1,34 @@ +From 53e34e3bff26fcbb7cc14178fa9fc80e7a73d556 Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 11 Oct 2022 16:34:44 +0300 +Subject: [PATCH] Makefile: disable stack protection + +The Buildroot toolchain might enable stack protection by default. That +breaks linking because ATF does not provide the required __stack_chk +routines. + +The mv-ddr-marvell Makefile provides no way to add custom CFLAGS. Patch +Makefile to disable stack protection. + +Signed-off-by: Baruch Siach +--- +Upstream status: not applicable; Buildroot specific +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index 3f0dd89a7381..feae75cc16e4 100644 +--- a/Makefile ++++ b/Makefile +@@ -331,6 +331,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT) + CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4 + CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc + CFLAGS += -march=armv8-a -fpie ++CFLAGS += -fno-stack-protector + + # PLATFORM is set in ble/ble.mk + ifneq ($(findstring a80x0,$(PLATFORM)),) +-- +2.35.1 + From peter at korsgaard.com Mon Oct 17 08:38:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:38:11 +0200 Subject: [Buildroot] [git commit] package/libosip2: security bump to version 5.3.1 Message-ID: <20221017083837.F14DD86E08@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4e6cede090f0ad129469d9cd621cdf74d578712d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer overflow via the component osip_body_parse_header. Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libosip2/libosip2.hash | 2 +- package/libosip2/libosip2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libosip2/libosip2.hash b/package/libosip2/libosip2.hash index 071ad7e61a..a563f0c4cd 100644 --- a/package/libosip2/libosip2.hash +++ b/package/libosip2/libosip2.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -sha256 f4725916c22cf514969efb15c3c207233d64739383f7d42956038b78f6cae8c8 libosip2-5.3.0.tar.gz +sha256 fe82fe841608266ac15a5c1118216da00c554d5006e2875a8ac3752b1e6adc79 libosip2-5.3.1.tar.gz # Hash for license file: sha256 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de COPYING diff --git a/package/libosip2/libosip2.mk b/package/libosip2/libosip2.mk index 2f9b7a9242..618d98a85c 100644 --- a/package/libosip2/libosip2.mk +++ b/package/libosip2/libosip2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSIP2_VERSION = 5.3.0 +LIBOSIP2_VERSION = 5.3.1 LIBOSIP2_SITE = $(BR2_GNU_MIRROR)/osip LIBOSIP2_INSTALL_STAGING = YES LIBOSIP2_LICENSE = LGPL-2.1+ From peter at korsgaard.com Mon Oct 17 08:37:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:50 +0200 Subject: [Buildroot] [git commit] package/dhcp: security bump to version 4.4.3-P1 Message-ID: <20221017083837.E89C086DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=99a570ee2b1368ca8b2be36c496bbe71224679ad branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Corrected a reference count leak that occurs when the server builds responses to leasequery packets. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #253] CVE: CVE-2022-2928 - Corrected a memory leak that occurs when unpacking a packet that has an FQDN option (81) that contains a label with length greater than 63 bytes. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #254] CVE: CVE-2022-2929 https://kb.isc.org/docs/cve-2022-2928 https://kb.isc.org/docs/cve-2022-2929 https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dhcp/dhcp.hash | 4 ++-- package/dhcp/dhcp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dhcp/dhcp.hash b/package/dhcp/dhcp.hash index be03423db8..7dd80a7acc 100644 --- a/package/dhcp/dhcp.hash +++ b/package/dhcp/dhcp.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/dhcp/4.4.3/dhcp-4.4.3.tar.gz.sha256.asc -sha256 0e3ec6b4c2a05ec0148874bcd999a66d05518378d77421f607fb0bc9d0135818 dhcp-4.4.3.tar.gz +# Verified from https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1.tar.gz.sha256.asc +sha256 0ac416bb55997ca8632174fd10737fd61cdb8dba2752160a335775bc21dc73c7 dhcp-4.4.3-P1.tar.gz # Locally calculated sha256 45a39c430be0920cb9570f34b32d2378fe6048c034f2f3265b9326d64ada73df LICENSE diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk index 183c8322d6..7be40191c8 100644 --- a/package/dhcp/dhcp.mk +++ b/package/dhcp/dhcp.mk @@ -4,7 +4,7 @@ # ################################################################################ -DHCP_VERSION = 4.4.3 +DHCP_VERSION = 4.4.3-P1 DHCP_SITE = https://ftp.isc.org/isc/dhcp/$(DHCP_VERSION) DHCP_INSTALL_STAGING = YES DHCP_LICENSE = MPL-2.0 From peter at korsgaard.com Mon Oct 17 08:36:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:36:58 +0200 Subject: [Buildroot] [git commit] package/php: security bump version to 8.1.11 Message-ID: <20221017083837.DD6C186DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1684cd72b0557444ee80195b60c5ab57ff6b1313 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: http://bugs.php.net/81727 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 5fb373ec11..c4c42a2c7d 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 53477e73e6254dc942b68913a58d815ffdbf6946baf61a1f8ef854de524c27bf php-8.1.9.tar.xz +sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 77584813c3..7136fd9744 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.9 +PHP_VERSION = 8.1.11 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From peter at korsgaard.com Mon Oct 17 08:35:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:11 +0200 Subject: [Buildroot] [git commit] package/ffmpeg: bump version to 4.4.3 Message-ID: <20221017083837.A34EE86E08@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=529203635159f224a0de1a5f3a9fb11bbba46644 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/ffmpeg/ffmpeg.hash | 2 +- package/ffmpeg/ffmpeg.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ffmpeg/ffmpeg.hash b/package/ffmpeg/ffmpeg.hash index 8669a060d0..c9d7ea7c41 100644 --- a/package/ffmpeg/ffmpeg.hash +++ b/package/ffmpeg/ffmpeg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 af419a7f88adbc56c758ab19b4c708afbcae15ef09606b82b855291f6a6faa93 ffmpeg-4.4.2.tar.xz +sha256 6c5b6c195e61534766a0b5fe16acc919170c883362612816d0a1c7f4f947006e ffmpeg-4.4.3.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPLv2 sha256 b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe COPYING.LGPLv2.1 sha256 cb48bf09a11f5fb576cddb0431c8f5ed0a60157a9ec942adffc13907cbe083f2 LICENSE.md diff --git a/package/ffmpeg/ffmpeg.mk b/package/ffmpeg/ffmpeg.mk index ced5ce598f..136e3e24ca 100644 --- a/package/ffmpeg/ffmpeg.mk +++ b/package/ffmpeg/ffmpeg.mk @@ -4,7 +4,7 @@ # ################################################################################ -FFMPEG_VERSION = 4.4.2 +FFMPEG_VERSION = 4.4.3 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.xz FFMPEG_SITE = http://ffmpeg.org/releases FFMPEG_INSTALL_STAGING = YES From peter at korsgaard.com Mon Oct 17 08:35:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:44 +0200 Subject: [Buildroot] [git commit] package/freeswitch: bump version to 1.10.8 Message-ID: <20221017083837.D26BC86DEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1b8230ab648ec33b93ff29a6c1ed5b327d36c7dd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 Removed two patches which are included in upstream release, renumbered remaining patch. Removed libs/apr-util/LICENSE due to upstream removal of bundled apr-util package. Added fix to disable pcap detection, otherwise /usr/bin/pcap-config can be picked-up which breaks building freeswitch. Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch | 26 ----- ...ypto-hash-hmac_ossl.c-fix-build-with-lib.patch} | 0 .../freeswitch/0002-core-fix--disable-libyuv.patch | 129 --------------------- package/freeswitch/freeswitch.hash | 5 +- package/freeswitch/freeswitch.mk | 9 +- 5 files changed, 8 insertions(+), 161 deletions(-) diff --git a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch b/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch deleted file mode 100644 index 57f6e660c1..0000000000 --- a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 68039d344d8e826e8b403c9cd0284fd07b4495ac Mon Sep 17 00:00:00 2001 -From: Dragos Oancea -Date: Tue, 26 Oct 2021 08:42:58 +0000 -Subject: [PATCH] [core] fix build SWITCH_BYTE_ORDER == __BIG_ENDIAN - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/68039d344d8e826e8b403c9cd0284fd07b4495ac - -Signed-off-by: Bernd Kuhls ---- - src/switch_rtp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/switch_rtp.c b/src/switch_rtp.c -index 1880bbb19c..843ee81381 100644 ---- a/src/switch_rtp.c -+++ b/src/switch_rtp.c -@@ -2155,7 +2155,7 @@ static void switch_send_rtcp_event(switch_rtp_t *rtp_session ,struct switch_rtcp - switch_event_add_header_string(event, SWITCH_STACK_BOTTOM, header, value); - snprintf(header, sizeof(header), "Source-Lost"); - #if SWITCH_BYTE_ORDER == __BIG_ENDIAN -- tmpLost = report->lost; /* signed 24bit will extended signess to int32_t automatically */ -+ tmpLost = rtcp_report_block->lost; /* signed 24bit will extended signess to int32_t automatically */ - #else - tmpLost = ntohl(rtcp_report_block->lost)>>8; - tmpLost = tmpLost | ((tmpLost & 0x00800000) ? 0xff000000 : 0x00000000); /* ...and signess compensation */ diff --git a/package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch b/package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch similarity index 100% rename from package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch rename to package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch diff --git a/package/freeswitch/0002-core-fix--disable-libyuv.patch b/package/freeswitch/0002-core-fix--disable-libyuv.patch deleted file mode 100644 index 137cb27cf8..0000000000 --- a/package/freeswitch/0002-core-fix--disable-libyuv.patch +++ /dev/null @@ -1,129 +0,0 @@ -From a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 Mon Sep 17 00:00:00 2001 -From: Sebastian Kemper -Date: Mon, 1 Nov 2021 09:59:09 +0100 -Subject: [PATCH] [core] fix "--disable-libyuv" - -Recent changes made it impossible to compile freeswitch without libyuv -support. - -src/switch_core_video.c: In function 'switch_img_read_from_file': -src/switch_core_video.c:3139:4: error: implicit declaration of function 'RAWToI420' [-Werror=implicit-function-declaration] -RAWToI420(data, width * 3, -^ -src/switch_core_video.c:3148:4: error: implicit declaration of function 'ABGRToARGB' [-Werror=implicit-function-declaration] -ABGRToARGB(data, width * 4, img->planes[SWITCH_PLANE_PACKED], img->stride[SWITCH_PLANE_PACKED], width, height); -^ - -Fix this my adding/moving the checks for "SWITCH_HAVE_YUV". - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 - -Signed-off-by: Bernd Kuhls -Signed-off-by: Sebastian Kemper ---- - src/switch_core_video.c | 12 ++++++++++++ - tests/unit/switch_core_video.c | 4 ++++ - 2 files changed, 16 insertions(+) - -diff --git a/src/switch_core_video.c b/src/switch_core_video.c -index 7dbd685d6ee..0d377f9c3e4 100644 ---- a/src/switch_core_video.c -+++ b/src/switch_core_video.c -@@ -3116,6 +3116,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url_png(switch_image_t *img, cha - - SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name, switch_img_fmt_t img_fmt) - { -+#ifdef SWITCH_HAVE_YUV - int width = 0, height = 0, channels = 0; - int comp = STBI_rgb; - unsigned char *data = NULL; -@@ -3155,12 +3156,16 @@ SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name - } else if (data) { - stbi_image_free(data); - } -+#endif - - return NULL; - } - - SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, const char* file_name, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - const char *ext = strrchr(file_name, '.'); -@@ -3217,6 +3222,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, co - free(data); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif - } - - typedef struct data_url_context_s { -@@ -3224,14 +3230,19 @@ typedef struct data_url_context_s { - char **urlP; - } data_url_context_t; - -+#ifdef SWITCH_HAVE_YUV - static void data_url_write_func(void *context, void *data, int size) - { - switch_buffer_t *buffer = (switch_buffer_t *)context; - switch_buffer_write(buffer, data, size); - } -+#endif - - SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char **urlP, const char *type, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - int stride_in_bytes = 0; -@@ -3300,6 +3311,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char ** - switch_buffer_destroy(&buffer); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif /* SWITCH_HAVE_YUV */ - } - - -diff --git a/tests/unit/switch_core_video.c b/tests/unit/switch_core_video.c -index 27c96102929..e395db474d5 100644 ---- a/tests/unit/switch_core_video.c -+++ b/tests/unit/switch_core_video.c -@@ -48,6 +48,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEARDOWN_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(data_url_test) - { - char *data_url = NULL; -@@ -88,6 +89,7 @@ FST_CORE_BEGIN("./conf") - unlink(argb_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - - FST_TEST_BEGIN(img_patch) - { -@@ -239,6 +241,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEST_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(stb_data_url) - { - switch_image_t *img = switch_img_alloc(NULL, SWITCH_IMG_FMT_I420, 120, 60, 1); -@@ -321,6 +324,7 @@ FST_CORE_BEGIN("./conf") - unlink(jpg_write_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - } - FST_SUITE_END() - } diff --git a/package/freeswitch/freeswitch.hash b/package/freeswitch/freeswitch.hash index 8066c620c4..18a36ff23c 100644 --- a/package/freeswitch/freeswitch.hash +++ b/package/freeswitch/freeswitch.hash @@ -1,10 +1,9 @@ -# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.7.-release.tar.xz.sha256 -sha256 0919bddc2ea9cab2e4944314e71637bea9dd4f40d510722a74ea032104594c41 freeswitch-1.10.7.-release.tar.xz +# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.8.-release.tar.xz.sha256 +sha256 1176b26b2f463de2980e5be953f81ced94d23c784452bd41e086d3933a88be5f freeswitch-1.10.8.-release.tar.xz # Locally computed sha256 75c933202f40939cdc3827fce20a1efdaa38291e2b5a65d234eb16e2cffda66a COPYING sha256 c3e3388768dae8bf4edcc4108f95be815b8a05c0b0aef6e4c3d8df81affdfa34 docs/OPENH264_BINARY_LICENSE.txt sha256 e8e26b16da14aa3e6ed5c22c705fdc1f45d6225fca461ea9f7314bcdfdc414c4 libs/apr/LICENSE -sha256 1eefb2ea1db0af7729a9d8a27d7c65d8a37ab185393f935b029aac6828ce315a libs/apr-util/LICENSE sha256 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615 libs/libvpx/LICENSE sha256 2b2cc1180c7e6988328ad2033b04b80117419db9c4c584918bbb3cfec7e9364f libs/libyuv/LICENSE sha256 7d72a8aee2c4b1a084200487992a5d86f5df6b535727a14c1874918e99d24600 libs/libzrtp/src/zrtp_legal.c diff --git a/package/freeswitch/freeswitch.mk b/package/freeswitch/freeswitch.mk index 24c1ee4dd4..6234dd8e97 100644 --- a/package/freeswitch/freeswitch.mk +++ b/package/freeswitch/freeswitch.mk @@ -4,20 +4,19 @@ # ################################################################################ -FREESWITCH_VERSION = 1.10.7 +FREESWITCH_VERSION = 1.10.8 FREESWITCH_SOURCE = freeswitch-$(FREESWITCH_VERSION).-release.tar.xz FREESWITCH_SITE = https://files.freeswitch.org/freeswitch-releases # External modules need headers/libs from staging FREESWITCH_INSTALL_STAGING = YES FREESWITCH_LICENSE = MPL-1.1, \ GPL-3.0+ with font exception (fonts), \ - Apache-2.0 (apr, apr-util), \ + Apache-2.0 (apr), \ BSD-3-Clause (libsrtp) FREESWITCH_LICENSE_FILES = \ COPYING \ libs/apr/LICENSE \ - libs/apr-util/LICENSE \ libs/srtp/LICENSE FREESWITCH_CPE_ID_VENDOR = freeswitch @@ -50,6 +49,10 @@ FREESWITCH_CONF_ENV += \ ac_cv_prog_PHP_CONFIG=false \ ac_cv_have_php_config=no +# disable pcap detection, pcap is an optional dependency for unit tests +FREESWITCH_CONF_ENV += \ + ac_cv_prog_HAVE_PCAP_CONFIG=false + # copied from freeswitch/configure.ac, line 258+ FREESWITCH_CONF_ENV += \ ac_cv_file__dev_ptmx=yes \ From sebastien.szymanski at armadeus.com Mon Oct 17 09:05:04 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Mon, 17 Oct 2022 11:05:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-login: bump to version 0.6.2 Message-ID: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/python-flask-login/python-flask-login.hash | 4 ++-- package/python-flask-login/python-flask-login.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-login/python-flask-login.hash b/package/python-flask-login/python-flask-login.hash index d11e37cce8..c88b70f2d5 100644 --- a/package/python-flask-login/python-flask-login.hash +++ b/package/python-flask-login/python-flask-login.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/flask-login/json -md5 0a1576eab473c2a8bb576348333d5ef5 Flask-Login-0.6.1.tar.gz -sha256 1306d474a270a036d6fd14f45640c4d77355e4f1c67ca4331b372d3448997b8c Flask-Login-0.6.1.tar.gz +md5 8020b22ad7ec6f17034f90117a520633 Flask-Login-0.6.2.tar.gz +sha256 c0a7baa9fdc448cdd3dd6f0939df72eec5177b2f7abe6cb82fc934d29caac9c3 Flask-Login-0.6.2.tar.gz # Locally computed sha256 checksums sha256 7a9dfb9c5da204ed1370f3b62c13e2992a12da1da707f47e156897eeb4344e5b LICENSE diff --git a/package/python-flask-login/python-flask-login.mk b/package/python-flask-login/python-flask-login.mk index 9a11fde542..394fe197e3 100644 --- a/package/python-flask-login/python-flask-login.mk +++ b/package/python-flask-login/python-flask-login.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_LOGIN_VERSION = 0.6.1 +PYTHON_FLASK_LOGIN_VERSION = 0.6.2 PYTHON_FLASK_LOGIN_SOURCE = Flask-Login-$(PYTHON_FLASK_LOGIN_VERSION).tar.gz -PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/3c/0a/e376d599eb6a8999b803a8d390e32451e43a346dbe540350dad48be0069c +PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/cc/da/eae45ba9ec58af45b46ef94c6ca04fb211ee57c06421b696e894eb11b064 PYTHON_FLASK_LOGIN_LICENSE = MIT PYTHON_FLASK_LOGIN_LICENSE_FILES = LICENSE PYTHON_FLASK_LOGIN_SETUP_TYPE = setuptools -- 2.37.3 From neal.frager at amd.com Mon Oct 17 09:44:29 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 03:44:29 -0600 Subject: [Buildroot] [PATCH v1 1/1] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset Message-ID: <20221017094429.4752-1-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the kv260. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Please note that this is a temporary solution as the kv260 pmufw is not yet available on the Xilinx github. This is expected in the coming months. The nealfrager github uses the same licensing terms as the Xilinx github regarding the distribution of zynqmp pmufw binary files. https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE Signed-off-by: Neal Frager --- configs/zynqmp_kria_kv260_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig index 4700e651dc..25bab4cbb4 100644 --- a/configs/zynqmp_kria_kv260_defconfig +++ b/configs/zynqmp_kria_kv260_defconfig @@ -30,7 +30,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/nealfrager/buildroot-firmware/raw/v2022.1/kv260/kv260_pmufw.bin" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From james.hilliard1 at gmail.com Mon Oct 17 11:29:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 07:29:52 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221017091644.1104527b@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> Message-ID: On Mon, Oct 17, 2022 at 3:16 AM Thomas Petazzoni wrote: > > Hello James, > > On Sun, 16 Oct 2022 12:45:06 -0400 > James Hilliard wrote: > > > > Again, that is very interesting, but please, please, conordinate with > > > the rest of us when you do such changes, because that is very weird, as > > > Fabrice noted, to suddenly get build failures out of the blue when > > > nothing seemed to have otherwise changed. > > > > I've been experimenting a bit in general with autobuilder settings to try > > and fix some issues with poor coverage. > > > > One other reason for testing with shuffle=random is to make higher kconfig > > probability values more useful(as otherwise build failures will be concentrated > > in packages early in the dependency ordering) : > > https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ > > Thanks a lot for all this work, which I find really useful. However, > like Yann said I believe we need to coordinate better. I think we would > prefer to see build results submitted on autobuild.buildroot.org to > only be generated by the official/upstream autobuild-run script. > Otherwise, it's super confusing as we get results that corresponding to > variations of build configurations/build logic that we are not even > aware they exist. The shuffle=random changes don't require modifying autobuild-run, I'm just tweaking the path to make in my autobuild service environment and then passing an additional config flag to autobuild-run like this: --make-opts="--shuffle=random" > > Another concern is that the autobuilder results are already extremely > bad these days, and therefore the priority is more on addressing/fixing > the existing issues rather than adding more. It's a lot > easier/practical to fix new problems when they are not mixed together > with zillions of old problems. Well builds were mostly failing in the same place due to deterministic build ordering, I was trying to make it so that we would see failures in different places as that's more useful compared with always seeing the same errors. To me seeing the same errors most of the time indicates there's some major coverage issues with the autobuilders which need fixing. > > Again, thanks a lot for your work on this! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From nolange79 at gmail.com Mon Oct 17 12:12:02 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 14:12:02 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: Message-ID: Hi, Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN : > > Hello All! > > This small four-patch series touches on the delicate intricacies of the > systemd package and how we integrate it in Buildroot, especially with > regard to read-only filesystems. > > The underlying issue is that systemd wants a writable /var filesystem > (it will store a bunch of things at runtime in there). A lot of packages > also expect a writable /var. After all, var stands for variadic, so it > is not supposed to be set in stone and read-only. Nobody says var should be read-only, the argument is about doing work up-front. Which is enough to get alot things running even *if* its read-only. > The solution we implemented in Buildroot is to generate a factory for > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > on boot. Having a tmpfs means /var is repopulated from a clean state at > each boot, and people who want a persistent /var have to provide their > own mechanism to mount their actual filesystem instead. Here the issue is, that the logic will never be complete, I will have to dig up old threads, but it fails with various combinations of symlinks. Its an inherently fragile approach, and I would question the solution as whole. > However, for some people, this does not seem to work as expected, so we > introduced a call to systemd-tmpfiles at build time, to pre-populate the > rootfs from all the tmpfiles, of which our var factory, at build time. There are several usecases where this is atleast non-optimal, and for a default to mess with the filesystem in such a way is not a good foundation. I am not sure if I am up-to-date, but the original call during the fakeroot stage you just do the work that wouldve been done on first boot. > > These two mechanism clash with each others, and are mostly incompatible, > and causes files to be duplicated. One of them doesn't do anything than a regular system start, the other is likely to cause trouble, trying to fix packages that wont work with an empty var in an automatic way. > > To solve the issue, this series introduces new options, so the user can > elect to use either, none, or both mechanisms, as they see fit. > > The first steps are borrowed from Yann at work, where we make it easier to > change the location where /var is nounted from, by making it a systemd > mount unit, rather than use the legacy fstab, and move the factory to > /usr/share as it is a system factory (/etc is for the administartor to > provide overrides). Note that those two are not strictly required for > the following, but since that makes it easier to change the /var > filesystem in a systemd-compliant manner, they are a nice addition to > the series. > > Then we move together the two mechanisms under the auspices of a common > package, to make it easier to later make them conditional. > > Finally, we introduce those two new options, that drive each mechanism. > > Eventally, we want to highlight that, by default, the behaviour has not > changed, since the two new options default to y, so as to explicitly > keep the behaviour from nefore this patchset. I would prefer a robust solution that provides a filesystem image that is compatible with further tinkering, particularly mounting /var in the initramfs. I attacked a drop-in solution, that has none of the drawbacks, correctly works with mounting stuff in /var, and only requires overlayfs to be available in the kernel. Funny detail: together with the upfront creation of some directories in /var via the systemd-tmpfiles build-time call, a basic usable system is available even if the overlay fails. The recurring attempts to discuss this ended in [1]. Short on time nowadays so I can hardly pull together all relevant parts again. regards, Norbert > > Regards, > Yann E. MORIN. > > > ---------------------------------------------------------------- > Yann E. MORIN (4): > package/skeleton-systemd: move /var factory out of /etc > package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs > package/skeleton-systemd: host the tmpfiles preparation script > system: add options for var factory and tmpfiles pre-seed > > .../fakeroot_tmpfiles.sh | 0 > .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- > package/skeleton-init-systemd/var.mount | 18 ++++++++++ > package/systemd/systemd.mk | 6 ---- > system/Config.in | 38 +++++++++++++++++++++- > 5 files changed, 69 insertions(+), 11 deletions(-) > rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) > create mode 100644 package/skeleton-init-systemd/var.mount > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' [1] - https://lists.buildroot.org/pipermail/buildroot/2022-July/645680.html -------------- next part -------------- A non-text attachment was scrubbed... Name: overlay_var.tar.xz Type: application/x-xz Size: 692 bytes Desc: not available URL: From thomas.petazzoni at bootlin.com Mon Oct 17 12:18:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 14:18:43 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-15 In-Reply-To: References: Message-ID: <20221017141843.0d7d2963@windsurf> Hello Paul, This is happening on James autobuilder, who has introduced some special randomization stuff that would only appear with make 4.4. I have added James in Cc so that he can comment and see if he can reproduce and provide more details. Best regards, Thomas On Mon, 17 Oct 2022 12:18:20 +0100 Paul Cercueil wrote: > Hi Thomas, > > I can't reproduce, with this build's defconfig on latest master. It > just builds fine here. > > Cheers, > -Paul > > > Le dim., oct. 16 2022 at 05:38:19 -0000, Thomas Petazzoni > a ?crit : > > Hello, > > > > Autobuilder failures > > ==================== > > > > Below is a list of build failures reported by the Buildroot > > autobuilders > > in relation to packages or CPU architectures you are in charge of. > > Please help us improving the quality of Buildroot by investigating > > those > > build failures and sending patches to fix them. > > > > Results for the 'master' branch > > ------------------------------- > > > > Build failures related to your packages: > > > > arch | reason | > > url > > -------------+--------------------------------+--------------------------------------------------------------------------------- > > arm | umtprd-1.6.2 | > > http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d > > > > > > Thanks for your contribution to Buildroot! > > > > -- > > http://autobuild.buildroot.net > > -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 12:21:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 14:21:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> Message-ID: <20221017142109.424863e1@windsurf> On Mon, 17 Oct 2022 07:29:52 -0400 James Hilliard wrote: > The shuffle=random changes don't require modifying autobuild-run, I'm > just tweaking the path to make in my autobuild service environment and > then passing an additional config flag to autobuild-run like this: > --make-opts="--shuffle=random" Right, but my point stands: it's custom usage/configuration of autobuild-run that we would prefer to discuss on the mailing list first before deploying/enabling. > Well builds were mostly failing in the same place due to deterministic > build ordering, I was trying to make it so that we would see failures > in different places as that's more useful compared with always seeing > the same errors. > > To me seeing the same errors most of the time indicates there's some > major coverage issues with the autobuilders which need fixing. I think you're missing a point here: many of the builds today are failing due to the glibc 2.36 bump. So pretty much every single build that is glibc based will indeed fail with some error related to this glibc bump. Your additional randomization will not change anything to this. It's just that we now have the glibc bump issues + the newly discovered issues related to the extra randomization + the usual amount of build issues. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From peter at korsgaard.com Mon Oct 17 14:08:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:11 +0200 Subject: [Buildroot] [PATCH 1/2] package/docker-cli: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-1-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 15:42:32 -0700") References: <20221016224233.237038-1-christian@paral.in> Message-ID: <875ygia6gk.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > This release of Docker Engine comes with some bug-fixes, and an updated version > of Docker Compose. > Builder > Fix an issue that could result in a panic during docker builder prune or > docker system prune moby/moby#44122. > Daemon > Fix a bug where using docker volume prune would remove volumes that were > still in use if the daemon was running with "live restore" and was restarted > moby/moby#44238. > Packaging > Update Docker Compose to v2.11.2. > https://github.com/moby/moby/releases/tag/v20.10.19 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From luca.ceresoli at bootlin.com Mon Oct 17 13:58:54 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Mon, 17 Oct 2022 15:58:54 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <20221017155854.48220785@booty> On Mon, 17 Oct 2022 01:10:01 -0600 Neal Frager wrote: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu102. > Details of the issue can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Signed-off-by: Neal Frager > --- > configs/zynqmp_zcu102_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig > index 217fa0814b..66c24c4b64 100644 > --- a/configs/zynqmp_zcu102_defconfig > +++ b/configs/zynqmp_zcu102_defconfig > @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > BR2_TARGET_UBOOT_SPL=y > BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" > BR2_TARGET_UBOOT_ZYNQMP=y > -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" > +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" Why are these binaries board-specific? I thought this used to be only needed for the "community workflow" before U-Boot SPL was able to load a pmufw cfg object. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From peter at korsgaard.com Mon Oct 17 14:08:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:17 +0200 Subject: [Buildroot] [PATCH 2/2] package/docker-engine: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-2-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 15:42:33 -0700") References: <20221016224233.237038-1-christian@paral.in> <20221016224233.237038-2-christian@paral.in> Message-ID: <871qr6a6ge.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > This release of Docker Engine comes with some bug-fixes, and an updated version > of Docker Compose. > Builder > Fix an issue that could result in a panic during docker builder prune or > docker system prune moby/moby#44122. > Daemon > Fix a bug where using docker volume prune would remove volumes that were > still in use if the daemon was running with "live restore" and was restarted > moby/moby#44238. > Packaging > Update Docker Compose to v2.11.2. > https://github.com/moby/moby/releases/tag/v20.10.19 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 14:08:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/docker-compose: bump to version v2.11.2 In-Reply-To: <20221016230046.451093-1-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 16:00:46 -0700") References: <20221016230046.451093-1-christian@paral.in> Message-ID: <87wn8y8rvt.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > https://github.com/docker/compose/releases/tag/v2.11.2 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 14:06:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:06:58 +0200 Subject: [Buildroot] [git commit] package/docker-cli: bump to version 20.10.19 Message-ID: <20221017140840.482E386E39@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=231e4922173ea55032b91b2d068610fd380afb78 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-cli/docker-cli.hash | 2 +- package/docker-cli/docker-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-cli/docker-cli.hash b/package/docker-cli/docker-cli.hash index 8af47adc63..153e0e5d00 100644 --- a/package/docker-cli/docker-cli.hash +++ b/package/docker-cli/docker-cli.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 87ba64f76d3bb98666fa44552c3eb0b1c10e5e9c43010e8dbc180ba22690413a docker-cli-20.10.18.tar.gz +sha256 f4398ad858274605f8e4e55d4618b2f5bdff6969a4afa232842bb2417d8a98db docker-cli-20.10.19.tar.gz sha256 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0 LICENSE diff --git a/package/docker-cli/docker-cli.mk b/package/docker-cli/docker-cli.mk index 707069512e..1fac21790b 100644 --- a/package/docker-cli/docker-cli.mk +++ b/package/docker-cli/docker-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_CLI_VERSION = 20.10.18 +DOCKER_CLI_VERSION = 20.10.19 DOCKER_CLI_SITE = $(call github,docker,cli,v$(DOCKER_CLI_VERSION)) DOCKER_CLI_LICENSE = Apache-2.0 From peter at korsgaard.com Mon Oct 17 14:07:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:07:15 +0200 Subject: [Buildroot] [git commit] package/docker-engine: bump to version 20.10.19 Message-ID: <20221017140840.5239186E3D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0a1195186fa64f6c9db05bc90f2a16cd10f449a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-engine/docker-engine.hash | 2 +- package/docker-engine/docker-engine.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-engine/docker-engine.hash b/package/docker-engine/docker-engine.hash index e1c29f0926..dfd4f4e365 100644 --- a/package/docker-engine/docker-engine.hash +++ b/package/docker-engine/docker-engine.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9907aaaf39fb1c2c3fd427192e4a63d7adf8ddc9fb0e29c692a6ca10de9c34f6 docker-engine-20.10.18.tar.gz +sha256 228caadac1b37a5ba310eb25418cf1fdd8878336f1d8faf0a2daa87fcc577577 docker-engine-20.10.19.tar.gz sha256 7c87873291f289713ac5df48b1f2010eb6963752bbd6b530416ab99fc37914a8 LICENSE diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk index 246419ec4f..dc45baf055 100644 --- a/package/docker-engine/docker-engine.mk +++ b/package/docker-engine/docker-engine.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_ENGINE_VERSION = 20.10.18 +DOCKER_ENGINE_VERSION = 20.10.19 DOCKER_ENGINE_SITE = $(call github,moby,moby,v$(DOCKER_ENGINE_VERSION)) DOCKER_ENGINE_LICENSE = Apache-2.0 From peter at korsgaard.com Mon Oct 17 14:07:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:07:26 +0200 Subject: [Buildroot] [git commit] package/docker-compose: bump to version v2.11.2 Message-ID: <20221017140840.5C01386E3E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5af2679ddaaa887aa58eb841d37afcecddb73d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/docker/compose/releases/tag/v2.11.2 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-compose/docker-compose.hash | 2 +- package/docker-compose/docker-compose.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-compose/docker-compose.hash b/package/docker-compose/docker-compose.hash index 46a8c59d55..39f98523b8 100644 --- a/package/docker-compose/docker-compose.hash +++ b/package/docker-compose/docker-compose.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7f051283dc2c047a40604c52dffa579a079bdf54eca742da54f8352dcffc3549 docker-compose-2.10.0.tar.gz +sha256 69d7d0311ac34ed4543f9a694995fbc4e2b785976a5a710015c20f0d04c204cb docker-compose-2.11.2.tar.gz sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd LICENSE diff --git a/package/docker-compose/docker-compose.mk b/package/docker-compose/docker-compose.mk index 1d071cc423..bc88d8df88 100644 --- a/package/docker-compose/docker-compose.mk +++ b/package/docker-compose/docker-compose.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_COMPOSE_VERSION = 2.10.0 +DOCKER_COMPOSE_VERSION = 2.11.2 DOCKER_COMPOSE_SITE = $(call github,docker,compose,v$(DOCKER_COMPOSE_VERSION)) DOCKER_COMPOSE_LICENSE = Apache-2.0 DOCKER_COMPOSE_LICENSE_FILES = LICENSE From yann.morin at orange.com Mon Oct 17 14:11:54 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Mon, 17 Oct 2022 16:11:54 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: Message-ID: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Norbert, All, On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > : [--SNIP--] > > The solution we implemented in Buildroot is to generate a factory for > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > each boot, and people who want a persistent /var have to provide their > > own mechanism to mount their actual filesystem instead. > > Here the issue is, that the logic will never be complete, I will > have to dig up old threads, but it fails with various combinations > of symlinks. Then we should fix it up and make the procedure more robust, when you can point to actual issues so that we know how it is broken and how to fix it. I (see the post-scriptum) would be happy to help look into that. > Its an inherently fragile approach, and I would question the solution as whole. The thing is, out of the box, Buildroot needs a working situation. Providing an overlay (see below) requires a setup by the user, setup That is highly dependent on the actual target: does it need to be partitioned and formatted on first boot? If so, how? Should it be mounted on the whole of / or just /var? Those are not something that falls in the scope of Buildroot. Providing a var factory and a tmpfs on /var is the only solution that can be (rather easily) implemented. > > However, for some people, this does not seem to work as expected, so we > > introduced a call to systemd-tmpfiles at build time, to pre-populate the > > rootfs from all the tmpfiles, of which our var factory, at build time. > > There are several usecases where this is atleast non-optimal, > and for a default to mess with the filesystem in such a way is > not a good foundation. > > I am not sure if I am up-to-date, but the original call during > the fakeroot stage you just do the work that wouldve been > done on first boot. > > > > > These two mechanism clash with each others, and are mostly incompatible, > > and causes files to be duplicated. > > One of them doesn't do anything than a regular system start, > the other is likely to cause trouble, trying to fix packages > that wont work with an empty var in an automatic way. Look, I do understand that you do not want to be using the var factory, and I do appreciate your arguments. Now, please understand that some people are very happy with using a /var factory, and some are even happy that /var is being mounted as a tmpfs too. All this series does, is make the two mechanisms optional, so that people with different expectations can still have a functional systm in either case, without an overshoot in the filesystem size due to the duplication of files caused by unconditionally calling systemd-tmpfiles at build time. It even keeps the curent behaviour by default. > > To solve the issue, this series introduces new options, so the user can > > elect to use either, none, or both mechanisms, as they see fit. [--SNIP--] > I would prefer a robust solution that provides a filesystem image > that is compatible with further tinkering, particularly mounting /var > in the initramfs. That is assuming that one will use an initramfs. For example, in my systems, I do not use one, and I do not want to use one. > I attacked a drop-in solution, that has none of the drawbacks, > correctly works with mounting stuff in /var, > and only requires overlayfs to be available in the kernel. That is assuming two things: - that an initramfs be used - that an overlay be mounted However, in my case I expressely do not want to use an initramfs: my rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on /var, as I am very happy that /var gets factory value at boot (my resilient data is accessed in some other ways). > Funny detail: together with the upfront creation > of some directories in /var via the systemd-tmpfiles build-time call, > a basic usable system is available even if the overlay fails. That is not true. Anything that expects /var to be writable will fail to start. > The recurring attempts to discuss this ended in [1]. And this series addresses the fact that, for some people, the var factory is not a good solution, so that they can disable it. It also addresses the case of those people for whom the var factory actually works, and want to keep using it, can disable the systemd-tmpfiles buildtime call. And finally, I believe it may even address more complex situations, where people will provide their own fakeroot-script to do the preparatory works. Regards, Yann E. MORIN. PS. Please note that there are two different Yann in this thread: me at work using Buildroot, and Yann at home, one of the maintainers. Look at the email to be sure who's talking (not that I-at-work talk in the name of my employer either). I try to segregate the two identities as much as I can, but sometime there is some overlap, like here. YEM. > Short on time nowadays so I can hardly pull together all relevant parts again. > > regards, Norbert > > > > > Regards, > > Yann E. MORIN. > > > > > > ---------------------------------------------------------------- > > Yann E. MORIN (4): > > package/skeleton-systemd: move /var factory out of /etc > > package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs > > package/skeleton-systemd: host the tmpfiles preparation script > > system: add options for var factory and tmpfiles pre-seed > > > > .../fakeroot_tmpfiles.sh | 0 > > .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- > > package/skeleton-init-systemd/var.mount | 18 ++++++++++ > > package/systemd/systemd.mk | 6 ---- > > system/Config.in | 38 +++++++++++++++++++++- > > 5 files changed, 69 insertions(+), 11 deletions(-) > > rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) > > create mode 100644 package/skeleton-init-systemd/var.mount > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > '------------------------------^-------^------------------^--------------------' > > [1] - https://lists.buildroot.org/pipermail/buildroot/2022-July/645680.html > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From neal.frager at amd.com Mon Oct 17 14:15:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Mon, 17 Oct 2022 14:15:16 +0000 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017155854.48220785@booty> References: <20221017071002.48266-1-neal.frager@amd.com> <20221017155854.48220785@booty> Message-ID: Hi Luca, > Why are these binaries board-specific? I thought this used to be only > needed for the "community workflow" before U-Boot SPL was able to load > a pmufw cfg object. Good question! I had a feeling you would ask this. In the case of the zcu102, zcu104 and zcu106, the pmufw binary is not board specific. The same pmufw binary will work on all 3 boards and even custom hardware, if a developer wants to use it unchanged. But since the pmu reset gpios are customisable among other things, the kria kv260 actually uses a different pmufw configuration. And developers may wish to modify the pmufw for their target as well. Since the Xilinx firmware repository is created using the petalinux prebuilt images for each target hardware, we chose to have a pmufw.elf in each board directory to match what comes from the petalinux builds. That said, since the Xilinx repository has a pmufw.elf in each individual board directory, I thought it would be cleaner for buildroot to use the pmufw.elf for each specific target. Even if the zcu102 and zcu106 pmufw.elf binaries are really interchangeable. What do you think? Best regards, Neal Frager AMD From cps at microplex.com Mon Oct 17 14:40:53 2022 From: cps at microplex.com (Cem Sezer) Date: Mon, 17 Oct 2022 07:40:53 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed In-Reply-To: References: Message-ID: Hello, The issue was solved and I figured I'd reply here in case someone has this happen to them. My bad certificate was due to my board not having a battery to keep the clock going when it was powered off, and therefore the date was 1970. Changing the date to the current fixed this. I also added NTP from buildroot later. Cem On Wed, Oct 5, 2022 at 6:11 PM Cem Sezer wrote: > Hello, > > I updated to the newly released buildroot-2022.08.01 released a few days > ago and it fixed the TLSv1.0 issue and it started using TLSv1.2. However, > now I get the error "EAP-PEAP: TLS processing failed". Additionally, my > radius server outputs "eap_peap: ERROR: TLS Alert read:fatal:bad > certificate".Not sure how to proceed here. > > Thanks, > > Cem > > On Wed, Oct 5, 2022 at 4:28 PM Cem Sezer wrote: > >> Hello, >> >> On a new build, when I run wpa_supplicant, it seems to only allow >> TLSv1.0. When I specify the supplicant to use a newer version of TLS in >> wpa_supplicant.conf under phase1, it fails and the debug output says >> "TLSv1: No TLS version allowed". Am I missing something? When I don't >> specify, it defaults to using TLSv1.0. I included all parts of >> wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using >> buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl >> version 1.1.1.q >> >> Thanks in advance, >> >> Cem >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nolange79 at gmail.com Mon Oct 17 14:50:34 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 16:50:34 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Message-ID: Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > Norbert, All, > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > : > [--SNIP--] > > > The solution we implemented in Buildroot is to generate a factory for > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > each boot, and people who want a persistent /var have to provide their > > > own mechanism to mount their actual filesystem instead. > > > > Here the issue is, that the logic will never be complete, I will > > have to dig up old threads, but it fails with various combinations > > of symlinks. > > Then we should fix it up and make the procedure more robust, when you > can point to actual issues so that we know how it is broken and how to > fix it. I (see the post-scriptum) would be happy to help look into that. > > > Its an inherently fragile approach, and I would question the solution as whole. > > The thing is, out of the box, Buildroot needs a working situation. Yes, my argument would be a technical better solution. > > Providing an overlay (see below) requires a setup by the user, setup > That is highly dependent on the actual target: does it need to be > partitioned and formatted on first boot? If so, how? Should it be > mounted on the whole of / or just /var? > > Those are not something that falls in the scope of Buildroot. Providing > a var factory and a tmpfs on /var is the only solution that can be > (rather easily) implemented. Not sure you understand my appoach, more below. > > > > However, for some people, this does not seem to work as expected, so we > > > introduced a call to systemd-tmpfiles at build time, to pre-populate the > > > rootfs from all the tmpfiles, of which our var factory, at build time. > > > > There are several usecases where this is atleast non-optimal, > > and for a default to mess with the filesystem in such a way is > > not a good foundation. > > > > I am not sure if I am up-to-date, but the original call during > > the fakeroot stage you just do the work that wouldve been > > done on first boot. > > > > > > > > These two mechanism clash with each others, and are mostly incompatible, > > > and causes files to be duplicated. > > > > One of them doesn't do anything than a regular system start, > > the other is likely to cause trouble, trying to fix packages > > that wont work with an empty var in an automatic way. > > Look, I do understand that you do not want to be using the var factory, > and I do appreciate your arguments. > > Now, please understand that some people are very happy with using a /var > factory, and some are even happy that /var is being mounted as a tmpfs > too. Would they be unhappy if everything works as it did before? > > All this series does, is make the two mechanisms optional, so that people > with different expectations can still have a functional systm in either > case, without an overshoot in the filesystem size due to the duplication > of files caused by unconditionally calling systemd-tmpfiles at build > time. > > It even keeps the curent behaviour by default. I understand that, yes. > > > > To solve the issue, this series introduces new options, so the user can > > > elect to use either, none, or both mechanisms, as they see fit. > [--SNIP--] > > I would prefer a robust solution that provides a filesystem image > > that is compatible with further tinkering, particularly mounting /var > > in the initramfs. > > That is assuming that one will use an initramfs. For example, in my > systems, I do not use one, and I do not want to use one. No, initramfs is optional > > > I attacked a drop-in solution, that has none of the drawbacks, > > correctly works with mounting stuff in /var, > > and only requires overlayfs to be available in the kernel. > > That is assuming two things: > - that an initramfs be used > - that an overlay be mounted > > However, in my case I expressely do not want to use an initramfs: my > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > /var, as I am very happy that /var gets factory value at boot (my > resilient data is accessed in some other ways). I am not sure if initrd/initramfs means something different here. > > > Funny detail: together with the upfront creation > > of some directories in /var via the systemd-tmpfiles build-time call, > > a basic usable system is available even if the overlay fails. > > That is not true. Anything that expects /var to be writable will fail to > start. That's why I said basic usable system, more concrete: the services with systemd will work, and stuff like networking + openssh. > > > The recurring attempts to discuss this ended in [1]. > > And this series addresses the fact that, for some people, the var > factory is not a good solution, so that they can disable it. > > It also addresses the case of those people for whom the var factory > actually works, and want to keep using it, can disable the > systemd-tmpfiles buildtime call. > > And finally, I believe it may even address more complex situations, > where people will provide their own fakeroot-script to do the > preparatory works. My own usecase is that use the buildroot as pristine rootfs and then slice it up as necessary. But just to get this out of the way. More importantly, I would propose a simpler, yet more robust solution than the var factory. For this, the files in the attached archive have to end up in /lib/systemd/system. What this does: Before the time /var is supposed to be accessed, an tmpfs will be mounted in /run, and the /var folder will be shifted around to end up in an overlayfs *below* this tmpfs. The bind-mount is done with a systemd mount unit, means if you have mounts *in /var or below* those will be correctly ordered. - No initramfs necessary - No duplicate files in the var factory and tmpfs (unless they are modified of course). So your suashed files stay compressed. - No tricky autogenerated tmpfiles - Would be possible to do something similar in other init systems The only downside would be the reliance on overlayfs - technically you could also adopt that solution to copy stuff into the tmpfs. Besides my obvious biases there are technical arguments to be had. > > Regards, > Yann E. MORIN. > > PS. Please note that there are two different Yann in this thread: me at > work using Buildroot, and Yann at home, one of the maintainers. Look at > the email to be sure who's talking (not that I-at-work talk in the name > of my employer either). > I try to segregate the two identities as much as I can, but sometime > there is some overlap, like here. > YEM. Not making things much clearer ;) regards, Norbert From peter at korsgaard.com Mon Oct 17 15:05:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix In-Reply-To: <20221016153050.1163862-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:30:50 +0200") References: <20221016153050.1163862-1-bernd.kuhls@t-online.de> Message-ID: <87r0z68p8c.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:44 +0200 Subject: [Buildroot] [PATCH 1/2] package/libva: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:41:47 +0200") References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Message-ID: <87mt9u8p87.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS > Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit > https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/libva-utils: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:41:48 +0200") References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> <20221016154148.1254457-2-bernd.kuhls@t-online.de> Message-ID: <87ilki8p83.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:53 +0200 Subject: [Buildroot] [PATCH 1/3] package/intel-gmmlib: bump version to 22.2.1 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:44 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <87edv68p7y.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:58 +0200 Subject: [Buildroot] [PATCH 3/3] package/intel-mediasdk: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-3-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:46 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> <20221016154646.1257569-3-bernd.kuhls@t-online.de> Message-ID: <87a65u8p7t.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:06:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:06:27 +0200 Subject: [Buildroot] [PATCH 2/3] package/intel-mediadriver: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:45 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> <20221016154646.1257569-2-bernd.kuhls@t-online.de> Message-ID: <875ygi8p70.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:04:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:45 +0200 Subject: [Buildroot] [git commit] package/libva: bump version to 2.16.0 Message-ID: <20221017150655.6ECC686E38@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=998bf9206461855fc13e7a338abffdad2a1d0610 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/libva/libva.hash | 6 +++--- package/libva/libva.mk | 3 +-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/package/libva/libva.hash b/package/libva/libva.hash index ecca9271cc..2916898c31 100644 --- a/package/libva/libva.hash +++ b/package/libva/libva.hash @@ -1,5 +1,5 @@ -# From https://github.com/intel/libva/releases/download/2.15.0/libva-2.15.0.tar.bz2.sha1sum -sha1 b4fca8600961336b246e80552f9b0278c187051b libva-2.15.0.tar.bz2 +# From https://github.com/intel/libva/releases/download/2.16.0/libva-2.16.0.tar.bz2.sha1sum +sha1 ba1c0e196d69a26e54b065dc0f645bdf3be147a7 libva-2.16.0.tar.bz2 # Locally computed -sha256 258ed409458d3e7a000e1908bc852619615ee6a933359c745fcd93eb3e461eca libva-2.15.0.tar.bz2 +sha256 115faca0db2c417a37da49830870e260450fa13066f5e24e252a20c36d920a1c libva-2.16.0.tar.bz2 sha256 c86a782ee845b52472dae9b9d79fb915d333628ac0efe49cdce63644814931de COPYING diff --git a/package/libva/libva.mk b/package/libva/libva.mk index 4138daf8b4..3b6e9580d3 100644 --- a/package/libva/libva.mk +++ b/package/libva/libva.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_VERSION = 2.15.0 +LIBVA_VERSION = 2.16.0 LIBVA_SOURCE = libva-$(LIBVA_VERSION).tar.bz2 LIBVA_SITE = https://github.com/intel/libva/releases/download/$(LIBVA_VERSION) LIBVA_LICENSE = MIT @@ -30,7 +30,6 @@ endif ifeq ($(BR2_PACKAGE_WAYLAND),y) LIBVA_DEPENDENCIES += wayland -LIBVA_CONF_ENV += ac_cv_path_WAYLAND_SCANNER=$(HOST_DIR)/bin/wayland-scanner LIBVA_CONF_OPTS += --enable-wayland else LIBVA_CONF_OPTS += --disable-wayland From peter at korsgaard.com Mon Oct 17 15:05:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:07 +0200 Subject: [Buildroot] [git commit] package/intel-gmmlib: bump version to 22.2.1 Message-ID: <20221017150655.827CE86E72@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d6e72d04d5b8c8ee8e6af21decc12e4c6570f583 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-gmmlib/intel-gmmlib.hash | 2 +- package/intel-gmmlib/intel-gmmlib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-gmmlib/intel-gmmlib.hash b/package/intel-gmmlib/intel-gmmlib.hash index 9509796850..bfff5e4b82 100644 --- a/package/intel-gmmlib/intel-gmmlib.hash +++ b/package/intel-gmmlib/intel-gmmlib.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0b2253894c6fc8455b6d7c5e87e6504a76d6f60ea192e1445c2f93164bf529c0 intel-gmmlib-22.2.0.tar.gz +sha256 363084a52db1557f6e7409278c8ce46a66fcafa2b4672e399c452501a60b4437 intel-gmmlib-22.2.1.tar.gz sha256 8b7446825df3f8b0268307e272aa6aaaf78351c83161d860d02c913c22666c48 LICENSE.md diff --git a/package/intel-gmmlib/intel-gmmlib.mk b/package/intel-gmmlib/intel-gmmlib.mk index 6fec276205..e949176cf7 100644 --- a/package/intel-gmmlib/intel-gmmlib.mk +++ b/package/intel-gmmlib/intel-gmmlib.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_GMMLIB_VERSION = 22.2.0 +INTEL_GMMLIB_VERSION = 22.2.1 INTEL_GMMLIB_SITE = https://github.com/intel/gmmlib/archive INTEL_GMMLIB_LICENSE = MIT INTEL_GMMLIB_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Mon Oct 17 15:04:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:58 +0200 Subject: [Buildroot] [git commit] package/libva-utils: bump version to 2.16.0 Message-ID: <20221017150655.789B686E71@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d8bad2880dc5826043bf7c257c78c5ca2cd13e33 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/libva-utils/libva-utils.hash | 2 +- package/libva-utils/libva-utils.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libva-utils/libva-utils.hash b/package/libva-utils/libva-utils.hash index 3ff6a488fb..95bcee782b 100644 --- a/package/libva-utils/libva-utils.hash +++ b/package/libva-utils/libva-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 73609a24fe1dbf99e1472e20af1398d910f64c88b8615272f9f3539ffc5d2efc libva-utils-2.15.0.tar.gz +sha256 646c9bfff6a83504c48de2c786c9514ca30c5e916127faf00f143ef8147ee950 libva-utils-2.16.0.tar.gz sha256 c6220c9f87832c27abcb8a32eafdd2823e13ce146b3ea63d5deae2a76798ef50 COPYING diff --git a/package/libva-utils/libva-utils.mk b/package/libva-utils/libva-utils.mk index 0d6a3c062e..5feaa36995 100644 --- a/package/libva-utils/libva-utils.mk +++ b/package/libva-utils/libva-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_UTILS_VERSION = 2.15.0 +LIBVA_UTILS_VERSION = 2.16.0 LIBVA_UTILS_SITE = $(call github,intel,libva-utils,$(LIBVA_UTILS_VERSION)) LIBVA_UTILS_LICENSE = MIT LIBVA_UTILS_LICENSE_FILES = COPYING From peter at korsgaard.com Mon Oct 17 15:04:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:30 +0200 Subject: [Buildroot] [git commit] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix Message-ID: <20221017150655.65A5486E6E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2ebdd163c0d7bbf77bbe61a71a4d0fb13d9d9796 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash | 2 +- package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash index a24a7abcd8..c1d3b476b9 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3126ce811e03ac92363a4e399b908336bb54328b7fa0d42c25ac85b2fe5aa7d4 kodi-pvr-zattoo-19.7.15-Matrix.tar.gz +sha256 ac09db721e51b47f1ca7f4c2201833dbcd69040fd19b09c194fa7491ff4dad41 kodi-pvr-zattoo-19.7.16-Matrix.tar.gz sha256 310782e1abd43c4de6217c513e328bddf999d39302d67c6e05b10a59959827af LICENSE.md diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk index 559dbf884b..49b33916ee 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk @@ -4,7 +4,7 @@ # ################################################################################ -KODI_PVR_ZATTOO_VERSION = 19.7.15-Matrix +KODI_PVR_ZATTOO_VERSION = 19.7.16-Matrix KODI_PVR_ZATTOO_SITE = $(call github,rbuehlma,pvr.zattoo,$(KODI_PVR_ZATTOO_VERSION)) KODI_PVR_ZATTOO_LICENSE = GPL-2.0+ KODI_PVR_ZATTOO_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Mon Oct 17 15:05:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:15 +0200 Subject: [Buildroot] [git commit] package/intel-mediadriver: bump version to 22.5.4 Message-ID: <20221017150655.8C86586E74@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=31c0e8b86ee2ec812f34ab621b676ea774c83499 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 949c9d5f66..35e4c97c7c 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 65652b365d48be3c9f0b3c561502952b92ee5fcc587520b88d0d752cf2a6a3b5 intel-media-22.5.3.tar.gz +sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index 91c93fdcf3..d0c1213965 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.3 +INTEL_MEDIADRIVER_VERSION = 22.5.4 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause From peter at korsgaard.com Mon Oct 17 15:05:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:23 +0200 Subject: [Buildroot] [git commit] package/intel-mediasdk: bump version to 22.5.4 Message-ID: <20221017150655.970A986E38@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7ec976e9de03516690ba9ea9bb68c62ad042f09f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index a770551875..25894aea63 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 078fc882d97273754cee9bf9cab6b4d4fb3bb087765867a76f2f2b2817e3d747 intel-mediasdk-22.5.3.tar.gz +sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index aea0cac014..4080188dc5 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.3 +INTEL_MEDIASDK_VERSION = 22.5.4 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE From peter at korsgaard.com Mon Oct 17 15:07:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/pipewire: bump to version 0.3.59 In-Reply-To: <20221016171257.1278757-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sun, 16 Oct 2022 11:12:57 -0600") References: <20221016171257.1278757-1-james.hilliard1@gmail.com> Message-ID: <871qr68p5q.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Disable new unsupported bluez5-codec-lc3 feature. > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:08:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:08:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-login: bump to version 0.6.2 In-Reply-To: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> (=?utf-8?Q?=22S=C3=A9bastien?= Szymanski"'s message of "Mon, 17 Oct 2022 11:05:04 +0200") References: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> Message-ID: <87wn8y7ajz.fsf@dell.be.48ers.dk> >>>>> "S?bastien" == S?bastien Szymanski writes: > Signed-off-by: S?bastien Szymanski Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:07:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:00 +0200 Subject: [Buildroot] [git commit] package/pipewire: bump to version 0.3.59 Message-ID: <20221017150813.CD48D86E7E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c5428d8b7b83622578b2c75fc73691cbd0871d7d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Disable new unsupported bluez5-codec-lc3 feature. Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/pipewire/pipewire.hash | 2 +- package/pipewire/pipewire.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/pipewire/pipewire.hash b/package/pipewire/pipewire.hash index 21c3119945..9bead47bd9 100644 --- a/package/pipewire/pipewire.hash +++ b/package/pipewire/pipewire.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 da1fd2e6ee088aa22f5398caca76ff879e398ec9216fb6b9400c1177b8c68115 pipewire-0.3.57.tar.bz2 +sha256 32a6db3f42f00eb95a07369160a614420443ca4f4e90ac628db8ca508e08538e pipewire-0.3.59.tar.bz2 sha256 8909c319a7e27dbb33a15b9035f89ab3b7b2f6a12f8bcddc755206a8db1ada44 COPYING sha256 be4be5d77424833edf31f53fc1f1cecb6996b9e2d747d9e6fb8f878362ebc92b LICENSE diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk index 1aad4a3c5c..d7ae07170d 100644 --- a/package/pipewire/pipewire.mk +++ b/package/pipewire/pipewire.mk @@ -4,7 +4,7 @@ # ################################################################################ -PIPEWIRE_VERSION = 0.3.57 +PIPEWIRE_VERSION = 0.3.59 PIPEWIRE_SOURCE = pipewire-$(PIPEWIRE_VERSION).tar.bz2 PIPEWIRE_SITE = https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION) PIPEWIRE_LICENSE = MIT, LGPL-2.1+ (libspa-alsa), GPL-2.0 (libjackserver) @@ -20,6 +20,7 @@ PIPEWIRE_CONF_OPTS += \ -Dspa-plugins=enabled \ -Daudiomixer=enabled \ -Daudioconvert=enabled \ + -Dbluez5-codec-lc3=disabled \ -Dbluez5-codec-lc3plus=disabled \ -Dcontrol=enabled \ -Daudiotestsrc=enabled \ From peter at korsgaard.com Mon Oct 17 15:07:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:45 +0200 Subject: [Buildroot] [git commit] package/python-flask-login: bump to version 0.6.2 Message-ID: <20221017150813.D928786E80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e02e0f6a3b0799027aa70aa5ecfbc634732c6077 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: S??bastien Szymanski Signed-off-by: Peter Korsgaard --- package/python-flask-login/python-flask-login.hash | 4 ++-- package/python-flask-login/python-flask-login.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-login/python-flask-login.hash b/package/python-flask-login/python-flask-login.hash index d11e37cce8..c88b70f2d5 100644 --- a/package/python-flask-login/python-flask-login.hash +++ b/package/python-flask-login/python-flask-login.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/flask-login/json -md5 0a1576eab473c2a8bb576348333d5ef5 Flask-Login-0.6.1.tar.gz -sha256 1306d474a270a036d6fd14f45640c4d77355e4f1c67ca4331b372d3448997b8c Flask-Login-0.6.1.tar.gz +md5 8020b22ad7ec6f17034f90117a520633 Flask-Login-0.6.2.tar.gz +sha256 c0a7baa9fdc448cdd3dd6f0939df72eec5177b2f7abe6cb82fc934d29caac9c3 Flask-Login-0.6.2.tar.gz # Locally computed sha256 checksums sha256 7a9dfb9c5da204ed1370f3b62c13e2992a12da1da707f47e156897eeb4344e5b LICENSE diff --git a/package/python-flask-login/python-flask-login.mk b/package/python-flask-login/python-flask-login.mk index 9a11fde542..394fe197e3 100644 --- a/package/python-flask-login/python-flask-login.mk +++ b/package/python-flask-login/python-flask-login.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_LOGIN_VERSION = 0.6.1 +PYTHON_FLASK_LOGIN_VERSION = 0.6.2 PYTHON_FLASK_LOGIN_SOURCE = Flask-Login-$(PYTHON_FLASK_LOGIN_VERSION).tar.gz -PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/3c/0a/e376d599eb6a8999b803a8d390e32451e43a346dbe540350dad48be0069c +PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/cc/da/eae45ba9ec58af45b46ef94c6ca04fb211ee57c06421b696e894eb11b064 PYTHON_FLASK_LOGIN_LICENSE = MIT PYTHON_FLASK_LOGIN_LICENSE_FILES = LICENSE PYTHON_FLASK_LOGIN_SETUP_TYPE = setuptools From thomas.perale at essensium.com Mon Oct 17 15:17:22 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:22 +0200 Subject: [Buildroot] [PATCH 0/4] Add support for using a pre-compiled Go compiler Message-ID: <20221017151726.44005-1-thomas.perale@mind.be> Improvement from the buildroot TODO list. This patch add supports for pre-built version of the Go compiler. Right now this patch introduce a new virtual package called 'goc' to do the selection between two provider: - go - go-bin Right now there is some variable from the 'go' package are used in multiple go provider packages. In an upcoming patch all the go related packages will move to a 'go' subfolder that will hold all the common variables. Thomas Perale (4): package/goc: new virtual package package/pkg-golang: set dependencies to host-goc package/go-bin: new package support/testing: add tests for Go fs/oci/Config.in | 1 + package/Config.in.host | 2 ++ package/balena-engine/Config.in | 1 + package/containerd/Config.in | 1 + package/crucible/Config.in | 1 + package/delve/Config.in | 1 + package/docker-cli/Config.in | 1 + package/docker-compose/Config.in | 1 + package/docker-engine/Config.in | 1 + package/docker-proxy/Config.in | 1 + package/embiggen-disk/Config.in | 1 + package/flannel/Config.in | 1 + package/gitlab-runner/Config.in | 1 + package/go-bin/Config.in.host | 5 +++ package/go-bin/go-bin.hash | 4 +++ package/go-bin/go-bin.mk | 20 ++++++++++++ package/go/go.mk | 2 ++ package/goc/Config.in.host | 39 +++++++++++++++++++++++ package/goc/goc.mk | 7 +++++ package/gocryptfs/Config.in | 1 + package/mender-artifact/Config.in.host | 1 + package/mender-connect/Config.in | 1 + package/mender/Config.in | 1 + package/moby-buildkit/Config.in | 1 + package/moby-buildkit/Config.in.host | 1 + package/nerdctl/Config.in | 1 + package/pkg-golang.mk | 4 +-- package/runc/Config.in | 1 + package/tinifier/Config.in | 1 + package/wtfutil/Config.in | 1 + support/testing/tests/package/test_go.py | 40 ++++++++++++++++++++++++ 31 files changed, 143 insertions(+), 2 deletions(-) create mode 100644 package/go-bin/Config.in.host create mode 100644 package/go-bin/go-bin.hash create mode 100644 package/go-bin/go-bin.mk create mode 100644 package/goc/Config.in.host create mode 100644 package/goc/goc.mk create mode 100644 support/testing/tests/package/test_go.py -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:23 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:23 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-2-thomas.perale@mind.be> This virtual package implement the already existing go compiler compiled from source and shows it on the host package menu. The usage of a virtual package on top of the go compiler enable the supports of for multiple providers for the Go compiler. Similarly to the rust compiler, a pre-built go compiler package will be available in parallel to the current compiled go compiler package. Signed-off-by: Thomas Perale --- package/Config.in.host | 1 + package/go/go.mk | 2 ++ package/goc/Config.in.host | 15 +++++++++++++++ package/goc/goc.mk | 7 +++++++ 4 files changed, 25 insertions(+) create mode 100644 package/goc/Config.in.host create mode 100644 package/goc/goc.mk diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..8c44ff0cb4 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -38,6 +38,7 @@ menu "Host utilities" source "package/gnupg/Config.in.host" source "package/go/Config.in.host" source "package/go-bootstrap/Config.in.host" + source "package/goc/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" source "package/imagemagick/Config.in.host" diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..96c756cb11 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -12,6 +12,8 @@ GO_LICENSE = BSD-3-Clause GO_LICENSE_FILES = LICENSE GO_CPE_ID_VENDOR = golang +HOST_GO_PROVIDES = host-goc + HOST_GO_DEPENDENCIES = host-go-bootstrap HOST_GO_GOPATH = $(HOST_DIR)/share/go-path HOST_GO_HOST_CACHE = $(HOST_DIR)/share/host-go-cache diff --git a/package/goc/Config.in.host b/package/goc/Config.in.host new file mode 100644 index 0000000000..b0266b50ea --- /dev/null +++ b/package/goc/Config.in.host @@ -0,0 +1,15 @@ +config BR2_PACKAGE_HOST_GOC + bool "host go compiler" + depends on BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS + help + Compiler for the Go language + + https://go.dev + +if BR2_PACKAGE_HOST_GOC + +config BR2_PACKAGE_PROVIDES_HOST_GOC + string + default "host-go" + +endif diff --git a/package/goc/goc.mk b/package/goc/goc.mk new file mode 100644 index 0000000000..3259618989 --- /dev/null +++ b/package/goc/goc.mk @@ -0,0 +1,7 @@ +################################################################################ +# +# goc +# +################################################################################ + +$(eval $(host-virtual-package)) -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:24 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:24 +0200 Subject: [Buildroot] [PATCH 2/4] package/pkg-golang: set dependencies to host-goc In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-3-thomas.perale@mind.be> Use 'host-goc' instead of 'host-go' to build one of the implementation of the 'goc' package instead of building the 'go' package by default. Also select 'goc' in every package that are built by the go compiler to keep the dependencies in the 'menuconfig' corrects. Signed-off-by: Thomas Perale --- fs/oci/Config.in | 1 + package/balena-engine/Config.in | 1 + package/containerd/Config.in | 1 + package/crucible/Config.in | 1 + package/delve/Config.in | 1 + package/docker-cli/Config.in | 1 + package/docker-compose/Config.in | 1 + package/docker-engine/Config.in | 1 + package/docker-proxy/Config.in | 1 + package/embiggen-disk/Config.in | 1 + package/flannel/Config.in | 1 + package/gitlab-runner/Config.in | 1 + package/gocryptfs/Config.in | 1 + package/mender-artifact/Config.in.host | 1 + package/mender-connect/Config.in | 1 + package/mender/Config.in | 1 + package/moby-buildkit/Config.in | 1 + package/moby-buildkit/Config.in.host | 1 + package/nerdctl/Config.in | 1 + package/pkg-golang.mk | 4 ++-- package/runc/Config.in | 1 + package/tinifier/Config.in | 1 + package/wtfutil/Config.in | 1 + 23 files changed, 24 insertions(+), 2 deletions(-) diff --git a/fs/oci/Config.in b/fs/oci/Config.in index 5e7aff282f..a7c20fa60f 100644 --- a/fs/oci/Config.in +++ b/fs/oci/Config.in @@ -1,6 +1,7 @@ config BR2_TARGET_ROOTFS_OCI bool "oci image" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help Build an OCI (Open Container Initiative) image. diff --git a/package/balena-engine/Config.in b/package/balena-engine/Config.in index 02f694515e..64ff17752e 100644 --- a/package/balena-engine/Config.in +++ b/package/balena-engine/Config.in @@ -11,6 +11,7 @@ config BR2_PACKAGE_BALENA_ENGINE select BR2_PACKAGE_UTIL_LINUX_MOUNT # runtime select BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT # runtime select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT # runtime + select BR2_PACKAGE_HOST_GOC help balenaEngine is a new container engine purpose-built for embedded and IoT use cases and compatible with Docker diff --git a/package/containerd/Config.in b/package/containerd/Config.in index 0e3a55ef39..c07ee08d38 100644 --- a/package/containerd/Config.in +++ b/package/containerd/Config.in @@ -11,6 +11,7 @@ config BR2_PACKAGE_CONTAINERD select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT select BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT select BR2_PACKAGE_UTIL_LINUX_MOUNT + select BR2_PACKAGE_HOST_GOC help containerd is a daemon to control runC. diff --git a/package/crucible/Config.in b/package/crucible/Config.in index b27eb31ae5..c15a335b49 100644 --- a/package/crucible/Config.in +++ b/package/crucible/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_CRUCIBLE bool "crucible" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help Crucible is a One-Time-Programmable (OTP) fusing tool for the i.MX family. diff --git a/package/delve/Config.in b/package/delve/Config.in index 9428e4016a..c1db230c4d 100644 --- a/package/delve/Config.in +++ b/package/delve/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_DELVE_ARCH_SUPPORTS default y if BR2_x86_64 depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + select BR2_PACKAGE_HOST_GOC config BR2_PACKAGE_DELVE bool "delve" diff --git a/package/docker-cli/Config.in b/package/docker-cli/Config.in index 6f187c9d22..ae57d57e39 100644 --- a/package/docker-cli/Config.in +++ b/package/docker-cli/Config.in @@ -3,6 +3,7 @@ config BR2_PACKAGE_DOCKER_CLI depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Docker is a platform to build, ship, and run applications as lightweight containers. diff --git a/package/docker-compose/Config.in b/package/docker-compose/Config.in index 59128f7a19..ca037f710e 100644 --- a/package/docker-compose/Config.in +++ b/package/docker-compose/Config.in @@ -4,6 +4,7 @@ config BR2_PACKAGE_DOCKER_COMPOSE depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_PACKAGE_DOCKER_CLI + select BR2_PACKAGE_HOST_GOC help Multi-container applications with the Docker CLI. diff --git a/package/docker-engine/Config.in b/package/docker-engine/Config.in index 1f0efb8fcc..25df1f5819 100644 --- a/package/docker-engine/Config.in +++ b/package/docker-engine/Config.in @@ -9,6 +9,7 @@ config BR2_PACKAGE_DOCKER_ENGINE select BR2_PACKAGE_CONTAINERD # runtime dependency select BR2_PACKAGE_DOCKER_PROXY # runtime dependency select BR2_PACKAGE_IPTABLES # runtime dependency + select BR2_PACKAGE_HOST_GOC help Docker is a platform to build, ship, and run applications as lightweight containers. diff --git a/package/docker-proxy/Config.in b/package/docker-proxy/Config.in index 7e40536537..09597b0b53 100644 --- a/package/docker-proxy/Config.in +++ b/package/docker-proxy/Config.in @@ -3,6 +3,7 @@ config BR2_PACKAGE_DOCKER_PROXY depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Libnetwork is a Container Network Model that provides a consistent programming interface and the required network diff --git a/package/embiggen-disk/Config.in b/package/embiggen-disk/Config.in index 667d71c86e..19d8696a67 100644 --- a/package/embiggen-disk/Config.in +++ b/package/embiggen-disk/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_EMBIGGEN_DISK depends on BR2_USE_MMU # util-linux select BR2_PACKAGE_UTIL_LINUX # sfdisk select BR2_PACKAGE_UTIL_LINUX_BINARIES # sfdisk + select BR2_PACKAGE_HOST_GOC help embiggen-disk is a tool to resize disk partitions at runtime. diff --git a/package/flannel/Config.in b/package/flannel/Config.in index eb8d798f48..800746f9c6 100644 --- a/package/flannel/Config.in +++ b/package/flannel/Config.in @@ -8,6 +8,7 @@ config BR2_PACKAGE_FLANNEL depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Flannel is a virtual network that gives a subnet to each host for use with container runtimes. diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 89e3e87b5c..b21763309b 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -16,6 +16,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime + select BR2_PACKAGE_HOST_GOC help GitLab Runner is the open source project that is used to run your jobs and send the results back to GitLab. It is used in diff --git a/package/gocryptfs/Config.in b/package/gocryptfs/Config.in index 2630cafdcf..4cd8b368ea 100644 --- a/package/gocryptfs/Config.in +++ b/package/gocryptfs/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_GOCRYPTFS bool "gocryptfs" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help gocryptfs is an encrypted FUSE overlay filesystem. diff --git a/package/mender-artifact/Config.in.host b/package/mender-artifact/Config.in.host index c7be0ed261..761dc0e022 100644 --- a/package/mender-artifact/Config.in.host +++ b/package/mender-artifact/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MENDER_ARTIFACT bool "host mender-artifact" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help The mender-artifact tool is a CLI implementation of the Mender artifacts library. diff --git a/package/mender-connect/Config.in b/package/mender-connect/Config.in index 0845910880..a91021f1f9 100644 --- a/package/mender-connect/Config.in +++ b/package/mender-connect/Config.in @@ -9,6 +9,7 @@ config BR2_PACKAGE_MENDER_CONNECT select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_MENDER # runtime select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_HOST_GOC help mender-connect is a daemon responsible for handling bidirectional (websocket) communication with the Mender diff --git a/package/mender/Config.in b/package/mender/Config.in index cccb46361b..b6fe196f86 100644 --- a/package/mender/Config.in +++ b/package/mender/Config.in @@ -6,6 +6,7 @@ config BR2_PACKAGE_MENDER select BR2_PACKAGE_OPENSSL select BR2_PACKAGE_LIBOPENSSL_ENABLE_MD4 if BR2_PACKAGE_LIBOPENSSL select BR2_PACKAGE_LIBOPENSSL_ENABLE_RMD160 if BR2_PACKAGE_LIBOPENSSL + select BR2_PACKAGE_HOST_GOC help Mender is an open source over-the-air (OTA) software updater for embedded Linux devices. Mender comprises a client diff --git a/package/moby-buildkit/Config.in b/package/moby-buildkit/Config.in index 93c852bcdb..27496b5647 100644 --- a/package/moby-buildkit/Config.in +++ b/package/moby-buildkit/Config.in @@ -5,6 +5,7 @@ config BR2_PACKAGE_MOBY_BUILDKIT depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC depends on BR2_USE_MMU + select BR2_PACKAGE_HOST_GOC select BR2_PACKAGE_CGROUPFS_MOUNT if !BR2_PACKAGE_SYSTEMD # runtime dependency help BuildKit is a toolkit for converting source code to build diff --git a/package/moby-buildkit/Config.in.host b/package/moby-buildkit/Config.in.host index a3b18548f8..335153e7fc 100644 --- a/package/moby-buildkit/Config.in.host +++ b/package/moby-buildkit/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MOBY_BUILDKIT bool "host moby-buildkit" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help BuildKit is a toolkit for converting source code to build artifacts in an efficient expressive and repeatable manner. diff --git a/package/nerdctl/Config.in b/package/nerdctl/Config.in index 969b9bb40e..472f7b9559 100644 --- a/package/nerdctl/Config.in +++ b/package/nerdctl/Config.in @@ -6,6 +6,7 @@ config BR2_PACKAGE_NERDCTL depends on !BR2_TOOLCHAIN_USES_UCLIBC # containerd depends on BR2_USE_MMU # util-linux select BR2_PACKAGE_CONTAINERD # runtime + select BR2_PACKAGE_HOST_GOC help Docker-compatible CLI for containerd, controlling runc. diff --git a/package/pkg-golang.mk b/package/pkg-golang.mk index 0b3dc3d32f..8c9e645a9c 100644 --- a/package/pkg-golang.mk +++ b/package/pkg-golang.mk @@ -49,8 +49,8 @@ $(2)_BUILD_OPTS += \ # Target packages need the Go compiler on the host at download time (for # vendoring), and at build and install time. -$(2)_DOWNLOAD_DEPENDENCIES += host-go -$(2)_DEPENDENCIES += host-go +$(2)_DOWNLOAD_DEPENDENCIES += host-goc +$(2)_DEPENDENCIES += host-goc $(2)_BUILD_TARGETS ?= . diff --git a/package/runc/Config.in b/package/runc/Config.in index fe527b1954..297aea8d64 100644 --- a/package/runc/Config.in +++ b/package/runc/Config.in @@ -4,6 +4,7 @@ config BR2_PACKAGE_RUNC depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve + select BR2_PACKAGE_HOST_GOC help runC is a CLI tool for spawning and running containers according to the OCI specification. diff --git a/package/tinifier/Config.in b/package/tinifier/Config.in index fbadfe6bd9..89718e3a37 100644 --- a/package/tinifier/Config.in +++ b/package/tinifier/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_TINIFIER bool "tinifier" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help CLI tool for images compressing diff --git a/package/wtfutil/Config.in b/package/wtfutil/Config.in index 8c3efcea5d..475e6d91df 100644 --- a/package/wtfutil/Config.in +++ b/package/wtfutil/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_WTFUTIL bool "wtfutil" depends on BR2_USE_MMU # fork() depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help WTF is the personal information dashboard for your terminal. -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:25 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:25 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-4-thomas.perale@mind.be> This package provides a pre-built version of the go compiler for the host target. This enable the user to select between the pre-built and the compiled version of the go compiler. The pre-built version will be used by default when a go compiler is required. The virtual package 'goc' creates a menu that let the user select which variant of the go compiler to use. The supported host platform for the pre-built compiler are actually the same as the one for 'go-bootstrap' no further verification are required than the one already in place. For now GO_BIN_VERSION and GO_VERSION are set the same by hand but in next version this variable should be in common. Because the order of the '.mk' file is not guaranteed this will be investigated in a next patch. Signed-off-by: Thomas Perale --- package/Config.in.host | 1 + package/go-bin/Config.in.host | 5 +++++ package/go-bin/go-bin.hash | 4 ++++ package/go-bin/go-bin.mk | 20 ++++++++++++++++++++ package/goc/Config.in.host | 26 +++++++++++++++++++++++++- 5 files changed, 55 insertions(+), 1 deletion(-) create mode 100644 package/go-bin/Config.in.host create mode 100644 package/go-bin/go-bin.hash create mode 100644 package/go-bin/go-bin.mk diff --git a/package/Config.in.host b/package/Config.in.host index 8c44ff0cb4..95b59bdacc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -37,6 +37,7 @@ menu "Host utilities" source "package/genpart/Config.in.host" source "package/gnupg/Config.in.host" source "package/go/Config.in.host" + source "package/go-bin/Config.in.host" source "package/go-bootstrap/Config.in.host" source "package/goc/Config.in.host" source "package/google-breakpad/Config.in.host" diff --git a/package/go-bin/Config.in.host b/package/go-bin/Config.in.host new file mode 100644 index 0000000000..392060584f --- /dev/null +++ b/package/go-bin/Config.in.host @@ -0,0 +1,5 @@ +config BR2_PACKAGE_HOST_GO_BIN_HOST_ARCH + string + default 386 if BR2_HOSTARCH = "x86" + default amd64 if BR2_HOSTARCH = "x86_64" + default arm64 if BR2_HOSTARCH = "arm" diff --git a/package/go-bin/go-bin.hash b/package/go-bin/go-bin.hash new file mode 100644 index 0000000000..91456d3e9a --- /dev/null +++ b/package/go-bin/go-bin.hash @@ -0,0 +1,4 @@ +# sha256 checksum from https://go.dev/dl/ +sha256 9acc57342400c5b0c2da07b5b01b50da239dd4a7fad41a1fb56af8363ef4133f go1.19.1.linux-386.tar.gz +sha256 acc512fbab4f716a8f97a8b3fbaa9ddd39606a28be6c2515ef7c6c6311acffde go1.19.1.linux-amd64.tar.gz +sha256 49960821948b9c6b14041430890eccee58c76b52e2dbaafce971c3c38d43df9f go1.19.1.linux-arm64.tar.gz diff --git a/package/go-bin/go-bin.mk b/package/go-bin/go-bin.mk new file mode 100644 index 0000000000..cf2db90532 --- /dev/null +++ b/package/go-bin/go-bin.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# go-bin +# +################################################################################ + +GO_BIN_VERSION = 1.19.1 +GO_BIN_SITE = https://go.dev/dl +GO_BIN_LICENSE = BSD-3-Clause +GO_BIN_LICENSE_FILES = LICENSE + +HOST_GO_BIN_PROVIDES = host-goc + +HOST_GO_BIN_SOURCE = go$(GO_BIN_VERSION).linux-$(call qstrip, $(BR2_PACKAGE_HOST_GO_BIN_HOST_ARCH)).tar.gz + +define HOST_GO_BIN_INSTALL_CMDS + $(HOST_GO_INSTALL_CMDS) +endef + +$(eval $(host-generic-package)) diff --git a/package/goc/Config.in.host b/package/goc/Config.in.host index b0266b50ea..0bde50982f 100644 --- a/package/goc/Config.in.host +++ b/package/goc/Config.in.host @@ -8,8 +8,32 @@ config BR2_PACKAGE_HOST_GOC if BR2_PACKAGE_HOST_GOC +choice + prompt "Go compiler variant" + default BR2_PACKAGE_HOST_GO_BIN + help + Select a Go compiler variant. + + Default to 'host-go-bin'. + +config BR2_PACKAGE_HOST_GO + bool "host go" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + help + This package will build the go compiler for the host. + +config BR2_PACKAGE_HOST_GO_BIN + bool "host go (pre-built)" + help + This package will install pre-built versions of the compiler + for the host. + +endchoice + config BR2_PACKAGE_PROVIDES_HOST_GOC string - default "host-go" + # Default to host-go-bin + default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN + default "host-go" if BR2_PACKAGE_HOST_GO endif -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:26 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:26 +0200 Subject: [Buildroot] [PATCH 4/4] support/testing: add tests for Go In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-5-thomas.perale@mind.be> Test the support of both the pre-built Go compiler and the Go compiler built from source. The test consists of compiling and installing in the root file system of a ARM vexpress QEMU system. The tests pass if the program can be ran correctly on the target. Signed-off-by: Thomas Perale --- support/testing/tests/package/test_go.py | 40 ++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 support/testing/tests/package/test_go.py diff --git a/support/testing/tests/package/test_go.py b/support/testing/tests/package/test_go.py new file mode 100644 index 0000000000..746aa28fc4 --- /dev/null +++ b/support/testing/tests/package/test_go.py @@ -0,0 +1,40 @@ +import os + +import infra.basetest + + +class TestGoBase(infra.basetest.BRTest): + + def login(self): + cpio_file = os.path.join(self.builddir, "images", "rootfs.cpio") + self.emulator.boot(arch="armv5", + kernel="builtin", + options=["-initrd", cpio_file]) + self.emulator.login() + + +class TestGoBin(TestGoBase): + config = infra.basetest.BASIC_TOOLCHAIN_CONFIG + \ + """ + BR2_TARGET_ROOTFS_CPIO=y + BR2_PACKAGE_HOST_GOC=y + BR2_PACKAGE_TINIFIER=y + """ + + def test_run(self): + self.login() + self.assertRunOk("tinifier -h") + + +class TestGo(TestGoBase): + config = infra.basetest.BASIC_TOOLCHAIN_CONFIG + \ + """ + BR2_TARGET_ROOTFS_CPIO=y + BR2_PACKAGE_HOST_GOC=y + BR2_PACKAGE_HOST_GO=y + BR2_PACKAGE_TINIFIER=y + """ + + def test_run(self): + self.login() + self.assertRunOk("tinifier -h") -- 2.37.0 From yann.morin at orange.com Mon Oct 17 16:00:44 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Mon, 17 Oct 2022 18:00:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Message-ID: <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Norert, All, On 2022-10-17 16:50 +0200, Norbert Lange spake thusly: > Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > > : > > [--SNIP--] > > > > The solution we implemented in Buildroot is to generate a factory for > > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > > each boot, and people who want a persistent /var have to provide their > > > > own mechanism to mount their actual filesystem instead. > > > Here the issue is, that the logic will never be complete, I will > > > have to dig up old threads, but it fails with various combinations > > > of symlinks. > > The thing is, out of the box, Buildroot needs a working situation. > Yes, my argument would be a technical better solution. But so far, we do not have that technically better solution, so we need to fix things that are arctually broken. [--SNIP--] [--SNIP--] > > Now, please understand that some people are very happy with using a /var > > factory, and some are even happy that /var is being mounted as a tmpfs > > too. > Would they be unhappy if everything works as it did before? By "works as it did before", do you mean "using a var factory that was not broken for them"? Yes, I am being teasing. We'd have to evaluate the alternative proposal when we see it, if that can replace the existing solution. > > That is assuming that one will use an initramfs. For example, in my > > systems, I do not use one, and I do not want to use one. > No, initramfs is optional Ah, but you had so far only talked about using an initramfs to prepare an overlay, so I assumed your solution was tied to using an initramfs. If it's not, then let's see it. [--SNIP--] > > However, in my case I expressely do not want to use an initramfs: my > > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > > /var, as I am very happy that /var gets factory value at boot (my > > resilient data is accessed in some other ways). > I am not sure if initrd/initramfs means something different here. initrd is a blockdevice in memory. The filesystem one puts in there can be any filesystem that could be otherwise stored on another blockdevice. initramfs is a filesystem in memory, like a tmpfs. The initramfs is read-write. > > > The recurring attempts to discuss this ended in [1]. [--SNIP--] > > And finally, I believe it may even address more complex situations, > > where people will provide their own fakeroot-script to do the > > preparatory works. > > My own usecase is that use the buildroot as pristine rootfs and then > slice it up as > necessary. But just to get this out of the way. > > More importantly, I would propose a simpler, yet more robust solution > than the var factory. > > For this, the files in the attached archive have to end up in > /lib/systemd/system. Did you forget to attach something, by chance? > What this does: > Before the time /var is supposed to be accessed, an tmpfs will be > mounted in /run, We already have that: /run is automatically mounted by systemd, no? > and the /var folder will be shifted around to end up in an overlayfs > *below* this tmpfs. What do you mean by "shifted"? > The bind-mount is done with a systemd mount unit, means if you have mounts > *in /var or below* those will be correctly ordered. Yeah, switching away from the fstab is good. > - No initramfs necessary > - No duplicate files in the var factory and tmpfs (unless they are > modified of course). So your suashed files stay compressed. > - No tricky autogenerated tmpfiles > - Would be possible to do something similar in other init systems > > The only downside would be the reliance on overlayfs - technically you > could also > adopt that solution to copy stuff into the tmpfs. > > Besides my obvious biases there are technical arguments to be had. We all have biases, me ot the last. :-) My technical arguments for this series are: - it is currently kinda-broken - var factory works until proven otherwise - so we need to fix them I'll be sure to do as unbiased a review as possible for your proposal when I see it. ;-) > > PS. Please note that there are two different Yann in this thread: me at > > work using Buildroot, and Yann at home, one of the maintainers. Look at > > the email to be sure who's talking (not that I-at-work talk in the name > > of my employer either). > > I try to segregate the two identities as much as I can, but sometime > > there is some overlap, like here. > > YEM. > > Not making things much clearer ;) If it can comfort you, it is not much clearer in my own head either! ;-) Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From christian at paral.in Mon Oct 17 16:05:00 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:05:00 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017142849.41399-4-thomas.perale@mind.be> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> Message-ID: Hi all, This looks interesting, one request though... On Mon, Oct 17, 2022, 7:29 AM Thomas Perale wrote: > + # Default to host-go-bin > + default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN > + default "host-go" if BR2_PACKAGE_HOST_GO Please don't default to downloading something predompiled. Especially when the behavior currently defaults to compiling everything from source. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:06:51 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:06:51 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017142849.41399-2-thomas.perale@mind.be> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:29 AM Thomas Perale wrote: > This virtual package implement the already existing go compiler compiled > from source and shows it on the host package menu. > > The usage of a virtual package on top of the go compiler enable the > supports of for multiple providers for the Go compiler. Is it not possible to continue using the existing host-go target and simply add a parameter which enables downloading the precompiled version instead? Rather than add a new package. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:10:22 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:10:22 -0700 Subject: [Buildroot] [PATCH 2/4] package/pkg-golang: set dependencies to host-goc In-Reply-To: <20221017143125.41622-3-thomas.perale@mind.be> References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-3-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:31 AM Thomas Perale wrote: > Use 'host-goc' instead of 'host-go' to build one of the implementation > of the 'goc' package instead of building the 'go' package by default. > > Also select 'goc' in every package that are built by the go compiler > to keep the dependencies in the 'menuconfig' corrects. > Similar to my other email about this - why can't we keep using host-go and avoid changing everything across the tree? It should be possible to instead have a parameter for host go which changes the current default of compile from source to downloading the prebuilt. Also, nowhere in the Go ecosystem is it called 'goc' - this would add significant confusion, in my opinion. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:13:54 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:13:54 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017143125.41622-4-thomas.perale@mind.be> References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-4-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:31 AM Thomas Perale wrote: > This package provides a pre-built version of the go compiler for the > host target. > This enable the user to select between the pre-built and the compiled > version of the go compiler. The pre-built version will be used by > default when a go compiler is required. > > The virtual package 'goc' creates a menu that let the user select which > variant of the go compiler to use. > > The supported host platform for the pre-built compiler are actually the > same as the one for 'go-bootstrap' no further verification are required > than the one already in place. > > For now GO_BIN_VERSION and GO_VERSION are set the same by hand but in > next version this variable should be in common. Because the order of the > '.mk' file is not guaranteed this will be investigated in a next patch. > Instead of adding new packages... Continue using "host-go" and add parameters under a menu config for it. Then you can simply use a single variable - GO_VERSION - rather than 2 new packages. I'm happy to send a prototype of this if you need. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From nolange79 at gmail.com Mon Oct 17 16:49:43 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 18:49:43 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Message-ID: Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > Norert, All, > > On 2022-10-17 16:50 +0200, Norbert Lange spake thusly: > > Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > > > : > > > [--SNIP--] > > > > > The solution we implemented in Buildroot is to generate a factory for > > > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > > > each boot, and people who want a persistent /var have to provide their > > > > > own mechanism to mount their actual filesystem instead. > > > > Here the issue is, that the logic will never be complete, I will > > > > have to dig up old threads, but it fails with various combinations > > > > of symlinks. > > > The thing is, out of the box, Buildroot needs a working situation. > > Yes, my argument would be a technical better solution. > > But so far, we do not have that technically better solution, so we need > to fix things that are arctually broken. I tried to bring that in for ages. Probably just have cooked up a patch instead. > > [--SNIP--] > [--SNIP--] > > > Now, please understand that some people are very happy with using a /var > > > factory, and some are even happy that /var is being mounted as a tmpfs > > > too. > > Would they be unhappy if everything works as it did before? > > By "works as it did before", do you mean "using a var factory that was > not broken for them"? Yes, I am being teasing. > > We'd have to evaluate the alternative proposal when we see it, if that > can replace the existing solution. > > > > That is assuming that one will use an initramfs. For example, in my > > > systems, I do not use one, and I do not want to use one. > > No, initramfs is optional > > Ah, but you had so far only talked about using an initramfs to prepare > an overlay, so I assumed your solution was tied to using an initramfs. > If it's not, then let's see it. Nah, it was always in respect of not messing around to much with the filesystem itself. I consider managing patch-series time consuming, so I'd like to discuss the way this should be structured before. This could be one completely separate package for example, allowing different solutions. > > [--SNIP--] > > > However, in my case I expressely do not want to use an initramfs: my > > > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > > > /var, as I am very happy that /var gets factory value at boot (my > > > resilient data is accessed in some other ways). > > I am not sure if initrd/initramfs means something different here. > > initrd is a blockdevice in memory. The filesystem one puts in there can > be any filesystem that could be otherwise stored on another blockdevice. > > initramfs is a filesystem in memory, like a tmpfs. The initramfs is > read-write. Ok, I am using those pretty much interchangeable, just some block you tell the bootloader to load, either cpio or filesystem. > > > > > The recurring attempts to discuss this ended in [1]. > [--SNIP--] > > > And finally, I believe it may even address more complex situations, > > > where people will provide their own fakeroot-script to do the > > > preparatory works. > > > > My own usecase is that use the buildroot as pristine rootfs and then > > slice it up as > > necessary. But just to get this out of the way. > > > > More importantly, I would propose a simpler, yet more robust solution > > than the var factory. > > > > For this, the files in the attached archive have to end up in > > /lib/systemd/system. > > Did you forget to attach something, by chance? Was attached in my post before - now 2 mails back. gonna add it again for convienience. > > > What this does: > > Before the time /var is supposed to be accessed, an tmpfs will be > > mounted in /run, > > We already have that: /run is automatically mounted by systemd, no? mounts a tmpfs in /run/varoverlay, own directory. /run is guaranteed to be writable and available before any systemd unit is started. > > > and the /var folder will be shifted around to end up in an overlayfs > > *below* this tmpfs. > > What do you mean by "shifted"? you have to bind-mount /var to another directory, so you can use it as lower fs. /run/varoverlay/lower <- /var then.. you mount an overlayfs *at* /var where you need to reference the original folder with /run/varoverlay/lower /var <- overlay of /run/varoverlay/upper (tmpfs) and /run/varoverlay/lower( orignal /var ) > > > The bind-mount is done with a systemd mount unit, means if you have mounts > > *in /var or below* those will be correctly ordered. > > Yeah, switching away from the fstab is good. fstab wouldnt allow for the needed dependencies. > > > - No initramfs necessary > > - No duplicate files in the var factory and tmpfs (unless they are > > modified of course). So your suashed files stay compressed. > > - No tricky autogenerated tmpfiles > > - Would be possible to do something similar in other init systems > > > > The only downside would be the reliance on overlayfs - technically you > > could also > > adopt that solution to copy stuff into the tmpfs. > > > > Besides my obvious biases there are technical arguments to be had. > > We all have biases, me ot the last. :-) > > My technical arguments for this series are: > - it is currently kinda-broken > - var factory works until proven otherwise > - so we need to fix them > > I'll be sure to do as unbiased a review as possible for your proposal > when I see it. ;-) Gonna take me few days. should be easy to test tough with the provided files, just throw them into the buildroot filesystem overlay. Helps if you make some assessment where they should fit. the systemd package is already bloated enough. > > > > PS. Please note that there are two different Yann in this thread: me at > > > work using Buildroot, and Yann at home, one of the maintainers. Look at > > > the email to be sure who's talking (not that I-at-work talk in the name > > > of my employer either). > > > I try to segregate the two identities as much as I can, but sometime > > > there is some overlap, like here. > > > YEM. > > > > Not making things much clearer ;) > > If it can comfort you, it is not much clearer in my own head either! ;-) Good to know, so we can discuss on even terms. regards, Norbert -------------- next part -------------- A non-text attachment was scrubbed... Name: overlay_var.tar.xz Type: application/x-xz Size: 692 bytes Desc: not available URL: From peter at korsgaard.com Mon Oct 17 17:29:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 19:29:17 +0200 Subject: [Buildroot] [PATCH] package/python-django: security bump to version 4.0.8 Message-ID: <20221017172918.1737004-1-peter@korsgaard.com> Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ - CVE-2022-41323: Potential denial-of-service vulnerability in internationalized URLs (4.0.8) https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ Signed-off-by: Peter Korsgaard --- package/python-django/python-django.hash | 4 ++-- package/python-django/python-django.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-django/python-django.hash b/package/python-django/python-django.hash index bfc9219c7e..72adc30bb1 100644 --- a/package/python-django/python-django.hash +++ b/package/python-django/python-django.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/django/json -md5 ad4e850c7110a45a6c7778d5bd01b85e Django-4.0.6.tar.gz -sha256 a67a793ff6827fd373555537dca0da293a63a316fe34cb7f367f898ccca3c3ae Django-4.0.6.tar.gz +md5 75ec07b3e00c79fd6e67fbee53786b7a Django-4.0.8.tar.gz +sha256 07e6433f263c3839939cfabeb6d7557841e0419e47759a7b7d37f6d44d40adcb Django-4.0.8.tar.gz # Locally computed sha256 checksums sha256 b846415d1b514e9c1dff14a22deb906d794bc546ca6129f950a18cd091e2a669 LICENSE diff --git a/package/python-django/python-django.mk b/package/python-django/python-django.mk index d49c845d54..567d590f77 100644 --- a/package/python-django/python-django.mk +++ b/package/python-django/python-django.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_DJANGO_VERSION = 4.0.6 +PYTHON_DJANGO_VERSION = 4.0.8 PYTHON_DJANGO_SOURCE = Django-$(PYTHON_DJANGO_VERSION).tar.gz # The official Django site has an unpractical URL -PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/a4/17/b10aa26d7a566a3c19e9d29fac39c8643cbceb6cd7649a378d676839b5db +PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/1a/de/08d8a349ed0e3e1999eb86ae0347cc9eaf634cd65f1eb80b9387ac1dbe3c PYTHON_DJANGO_LICENSE = BSD-3-Clause PYTHON_DJANGO_LICENSE_FILES = LICENSE -- 2.30.2 From yann.morin.1998 at free.fr Mon Oct 17 17:55:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 19:55:00 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> Message-ID: <20221017175500.GB3666@scaer> Christian, All, On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > This virtual package implement the already existing go compiler compiled > from source and shows it on the host package menu. > The usage of a virtual package on top of the go compiler enable the > supports of for multiple providers for the Go compiler. > Is it not possible to continue using the existing host-go target and > simply add a parameter which enables downloading the precompiled > version instead? > Rather than add a new package. In fact, we want to have a similar implementation for rust, go, nodejs, so (without looking at the details of this series), I guess Thomas Perale took the same approach as the existing rust situation, like Thomas Petazzoni did in the recent host-nodejs series: https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 17 18:03:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 20:03:50 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> Message-ID: <20221017180350.GC3666@scaer> Christian, All, On 2022-10-17 09:05 -0700, Christian Stewart via buildroot spake thusly: > Hi all, > This looks interesting, one request though... > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > +? ? ? ?# Default to host-go-bin > > +? ? ? ?default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN > +? ? ? ?default "host-go" if BR2_PACKAGE_HOST_GO > > Please don't default to downloading something predompiled. Especially when the behavior currently defaults to compiling everything > from source. Agreed. The default should be to build everything from source when sources are available. The pre-built packages are only a fallback as a convenience for those that are too much in a hurry. Regards, Yann E. MORIN. > Thanks, > Christian Stewart > > Links: > 1. mailto:thomas.perale at essensium.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From christian at paral.in Mon Oct 17 18:10:22 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:10:22 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017175500.GB3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: Yann, On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: > > Christian, All, > > On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > This virtual package implement the already existing go compiler compiled > > from source and shows it on the host package menu. > > The usage of a virtual package on top of the go compiler enable the > > supports of for multiple providers for the Go compiler. > > Is it not possible to continue using the existing host-go target and > > simply add a parameter which enables downloading the precompiled > > version instead? > > Rather than add a new package. > > In fact, we want to have a similar implementation for rust, go, nodejs, > so (without looking at the details of this series), I guess Thomas > Perale took the same approach as the existing rust situation, like > Thomas Petazzoni did in the recent host-nodejs series: > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Thomas changed host-nodejs to be a metapackage: https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ This is not what this series does, which is to add a new host-goc package and refactor all Go packages to point to this new one. Sidenote: having a rust-bin and nodejs-bin makes sense, as those take a /very long/ time to compile. Having a go-bin on the other hand does not make as much sense, because compiling the Go compiler is fast (about 1 minute vs. Rust's 1 hour). In my opinion: - Do not add a new host-goc package. - Add parameter to host-go to select which compiler to use: - bin - src - host go compiler (see patch linked below) - If src is buildable: default to it - If src is not buildable: default to host Go compiler - Or if the parameter is set: use bin download This patch already solves the issue of selecting when to use the host go compiler or not: https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ ... it would be straightforward to add the Config parameter + binary download to host-go after applying that commit. My reasoning for why: - Avoid refactoring all Go packages across the tree. - Avoid confusing "goc" name (not used in Go ecosystem) - Backwards compatible with existing configs. - Fewer packages to maintain, easier to understand structure. I'll have a look at submitting a RFC series adjusting this one to the above structure. Thanks, Christian Stewart From bernd.kuhls at t-online.de Mon Oct 17 18:15:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 17 Oct 2022 20:15:23 +0200 Subject: [Buildroot] [PATCH 2022.02.x] package/php: security bump version to 8.0.24 Message-ID: <20221017181523.95205-1-bernd.kuhls@t-online.de> Fixes - CVE-2022-31629: http://bugs.php.net/81727 - CVE-2022-31628: http://bugs.php.net/81726 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 2e9aa6880b..55a92c6c36 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 973fec765336ee01f47536a5db1c2eee98df9d34a41522b7b6c760159bf0a77b php-8.0.20.tar.xz +sha256 8e6a63ac9cdabe4c345b32a54b18f348d9e50a1decda217faf2d61278d22f08b php-8.0.24.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index d9c2edd839..facc2f5634 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.0.20 +PHP_VERSION = 8.0.24 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Mon Oct 17 18:16:27 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 17 Oct 2022 20:16:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 References: <20221016155252.1723048-1-bernd.kuhls@t-online.de> <87k04yals1.fsf__18092.1028529823$1665995868$gmane$org@dell.be.48ers.dk> Message-ID: Am Mon, 17 Oct 2022 10:37:18 +0200 schrieb Peter Korsgaard: >>>>>> "Bernd" == Bernd Kuhls >>>>>> writes: > > > Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: > > http://bugs.php.net/81727 > > > Signed-off-by: Bernd Kuhls > > > > Committed, thanks. > > Is there a similar fix for the 8.0.x branch for 2022.02.x? Hi Peter, yes, sent http://patchwork.ozlabs.org/project/buildroot/patch/ 20221017181523.95205-1-bernd.kuhls at t-online.de/ Regards, Bernd From thomas.perale at essensium.com Mon Oct 17 18:30:27 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 20:30:27 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <42635550-c5eb-fcc9-dfc2-18c2776111ca@essensium.com> Dear Christian, Yann, Thank you for responses. As Yann said my idea behing "goc" was to keep the structure the same as the already existing case of 'rustc'. But I do agree with you Christian the 'goc' name is confusing and don't make much sense. Right now I'm already working on a second patch that will put every "go" related packages in a sub-directory: > package/ > ?? go/ > ? ?? go/ > ? ?? go-bin/ > ? ?? go-bootstrap/ > ? ?? go.mk > ? ?? Config.in This will remove the dependency to 'goc' virtual package because I will move it to 'package/go/go.mk' with the common variable between every 'go*' package. I just want to keep the same structure as Rust from now and if I do the modification of moving it to a subdir I also want to do the modification for rust packages. PERALE Thomas On 10/17/22 20:10, Christian Stewart wrote: > Yann, > > On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: >> Christian, All, >> >> On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: >>> On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: >>> This virtual package implement the already existing go compiler compiled >>> from source and shows it on the host package menu. >>> The usage of a virtual package on top of the go compiler enable the >>> supports of for multiple providers for the Go compiler. >>> Is it not possible to continue using the existing host-go target and >>> simply add a parameter which enables downloading the precompiled >>> version instead? >>> Rather than add a new package. >> In fact, we want to have a similar implementation for rust, go, nodejs, >> so (without looking at the details of this series), I guess Thomas >> Perale took the same approach as the existing rust situation, like >> Thomas Petazzoni did in the recent host-nodejs series: >> >> https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 > Thomas changed host-nodejs to be a metapackage: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ > > This is not what this series does, which is to add a new host-goc > package and refactor all Go packages to point to this new one. > > Sidenote: having a rust-bin and nodejs-bin makes sense, as those take > a /very long/ time to compile. Having a go-bin on the other hand does > not make as much sense, because compiling the Go compiler is fast > (about 1 minute vs. Rust's 1 hour). > > In my opinion: > > - Do not add a new host-goc package. > - Add parameter to host-go to select which compiler to use: > - bin > - src > - host go compiler (see patch linked below) > - If src is buildable: default to it > - If src is not buildable: default to host Go compiler > - Or if the parameter is set: use bin download > > This patch already solves the issue of selecting when to use the host > go compiler or not: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ > > ... it would be straightforward to add the Config parameter + binary > download to host-go after applying that commit. > > My reasoning for why: > > - Avoid refactoring all Go packages across the tree. > - Avoid confusing "goc" name (not used in Go ecosystem) > - Backwards compatible with existing configs. > - Fewer packages to maintain, easier to understand structure. > > I'll have a look at submitting a RFC series adjusting this one to the > above structure. > > Thanks, > Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Mon Oct 17 18:42:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 20:42:32 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017180350.GC3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> <20221017180350.GC3666@scaer> Message-ID: <20221017204232.652f8e89@windsurf> On Mon, 17 Oct 2022 20:03:50 +0200 "Yann E. MORIN" wrote: > Agreed. The default should be to build everything from source when > sources are available. The pre-built packages are only a fallback as > a convenience for those that are too much in a hurry. Except we do exactly the opposite for Rust, and I'm not sure for the host compiler of those languages it is a good idea to cause such a major impact on the default build time faced by our users. I clearly understand the need to be able from source and appreciate how important it is, but I'm not so sure the default should be to build all those compilers from source. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 17 18:44:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 20:44:42 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <20221017184442.GD3666@scaer> Christian, All, On 2022-10-17 11:10 -0700, Christian Stewart spake thusly: > On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: > > On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > > This virtual package implement the already existing go compiler compiled > > > from source and shows it on the host package menu. > > > The usage of a virtual package on top of the go compiler enable the > > > supports of for multiple providers for the Go compiler. > > > Is it not possible to continue using the existing host-go target and > > > simply add a parameter which enables downloading the precompiled > > > version instead? > > > Rather than add a new package. > > In fact, we want to have a similar implementation for rust, go, nodejs, > > so (without looking at the details of this series), I guess Thomas > > Perale took the same approach as the existing rust situation, like > > Thomas Petazzoni did in the recent host-nodejs series: > > > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 > > Thomas changed host-nodejs to be a metapackage: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ That patch does: - move the current host-nodejs package to host-nodejs-src as a host-generic-pacakge, - changes the existing host-nodejs from a host-generic-package to a host-virtual-package (there is no such notion as a meta-package in Buildroot) > This is not what this series does, which is to add a new host-goc > package and refactor all Go packages to point to this new one. I had a quick look, and it is indeed not what I expected it to be. > Sidenote: having a rust-bin and nodejs-bin makes sense, as those take > a /very long/ time to compile. Having a go-bin on the other hand does > not make as much sense, because compiling the Go compiler is fast > (about 1 minute vs. Rust's 1 hour). It takes a bit longer here, as host-go-bootstrap depends on the toolchain. So, running "make foo-legal-info" to check a go package, does take ages. > In my opinion: > - Do not add a new host-goc package. > - Add parameter to host-go to select which compiler to use: > - bin > - src I am not sure I follow what you are saying. If you are sayng that it should be as rust currently is, and as the nodejs proposal is, then I agree. ;-) > - host go compiler (see patch linked below) If we have a pre-built host-go in the tree, thetre is then no reason to be able to use the host system go compiler, is there? > - If src is buildable: default to it > - If src is not buildable: default to host Go compiler > - Or if the parameter is set: use bin download > > This patch already solves the issue of selecting when to use the host > go compiler or not: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ > > ... it would be straightforward to add the Config parameter + binary > download to host-go after applying that commit. > > My reasoning for why: > > - Avoid refactoring all Go packages across the tree. Agreed. This should be transparent to packages. > - Avoid confusing "goc" name (not used in Go ecosystem) Agreed. > - Backwards compatible with existing configs. If that is possible, then agreed; if it is not, then use sensible defaults (like build from source by default). > - Fewer packages to maintain, Not too much of a headache... > easier to understand structure. I am afraid I have to agree on that part, as the existing host-rust strucutre bit me not too long ago... > I'll have a look at submitting a RFC series adjusting this one to the > above structure. I would emphasize that we do want to have an similar implementation for go that we have for rust, and as was proposed for node. Regards, Yann E. MORIN. > Thanks, > Christian Stewart -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 17 18:48:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 20:48:19 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017175500.GB3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <20221017204819.47cb4078@windsurf> On Mon, 17 Oct 2022 19:55:00 +0200 "Yann E. MORIN" wrote: > In fact, we want to have a similar implementation for rust, go, nodejs, > so (without looking at the details of this series), I guess Thomas > Perale took the same approach as the existing rust situation, like > Thomas Petazzoni did in the recent host-nodejs series: > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Yes and no, because Thomas Perale changed all packages using Go to use host-goc instead of host-go, while my series keeps host-nodejs but changes it from host-generic-package to host-virtual-package. Also, I'd like to recap the naming we have: - Rust (existing) virtual package: host-rustc pre-compiled package: host-rust-bin from source package: host-rust - NodeJS (proposed by me) virtual package: host-nodejs pre-compiled package: host-nodejs-bin from source package: host-nodejs-src The odd thing here being that host-nodejs is a virtual package, but nodejs is a regular package building NodeJS from source for the target. - Go (proposed by Thomas Perale) virtual package: host-goc pre-compiled package: host-go-bin from source package: host-go So Thomas aligned on the naming used in the Rust world. I must say I do have a preference for the naming I have chosen for NodeJS, which IMO is clearer. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Mon Oct 17 18:51:00 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:51:00 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017184442.GD3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> <20221017184442.GD3666@scaer> Message-ID: Hi Yann, Just to reply to that one question on why a host go compiler is useful- On Mon, Oct 17, 2022 at 11:45 AM Yann E. MORIN wrote: > > - host go compiler (see patch linked below) > > If we have a pre-built host-go in the tree, thetre is then no reason to > be able to use the host system go compiler, is there? The host Go compiler may be compiled from source (i.e. Gentoo) and the user (me) wants to trust the gentoo binary for Go over downloading another precompiled bin from the internet. Thomas - On Mon, Oct 17, 2022 at 11:48 AM Thomas Petazzoni wrote: > - NodeJS (proposed by me) > virtual package: host-nodejs > pre-compiled package: host-nodejs-bin > from source package: host-nodejs-src > > The odd thing here being that host-nodejs is a virtual package, but > nodejs is a regular package building NodeJS from source for the > target. > > - Go (proposed by Thomas Perale) > virtual package: host-goc > pre-compiled package: host-go-bin > from source package: host-go > > So Thomas aligned on the naming used in the Rust world. I must say I do > have a preference for the naming I have chosen for NodeJS, which IMO is > clearer. I agree that the following would be preferable: virtual package: host-go pre-compiled package: host-go-bin from source package: host-go-src ... although I would submit that all 3 could live in a single host-go package. Best, Christian Stewart From christian at paral.in Mon Oct 17 18:52:43 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:52:43 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017204232.652f8e89@windsurf> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> <20221017180350.GC3666@scaer> <20221017204232.652f8e89@windsurf> Message-ID: Thomas, On Mon, Oct 17, 2022 at 11:42 AM Thomas Petazzoni wrote: > > On Mon, 17 Oct 2022 20:03:50 +0200 > "Yann E. MORIN" wrote: > > > Agreed. The default should be to build everything from source when > > sources are available. The pre-built packages are only a fallback as > > a convenience for those that are too much in a hurry. > > Except we do exactly the opposite for Rust, and I'm not sure for the > host compiler of those languages it is a good idea to cause such a > major impact on the default build time faced by our users. I clearly > understand the need to be able from source and appreciate how important > it is, but I'm not so sure the default should be to build all those > compilers from source. As you mentioned in a reply on the other email thread- The main thing that takes time with host-go from source is building the C toolchain. Provided that the C toolchain is pre-compiled, building host-go doesn't take long (~1-2 mins). Best regards, Christian Stewart From james.hilliard1 at gmail.com Mon Oct 17 19:02:32 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 15:02:32 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221017142109.424863e1@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> <20221017142109.424863e1@windsurf> Message-ID: On Mon, Oct 17, 2022 at 8:21 AM Thomas Petazzoni wrote: > > On Mon, 17 Oct 2022 07:29:52 -0400 > James Hilliard wrote: > > > The shuffle=random changes don't require modifying autobuild-run, I'm > > just tweaking the path to make in my autobuild service environment and > > then passing an additional config flag to autobuild-run like this: > > --make-opts="--shuffle=random" > > Right, but my point stands: it's custom usage/configuration of > autobuild-run that we would prefer to discuss on the mailing list first > before deploying/enabling. I've generally been deploying autobuild-run tweaks after initial local testing. Typically I send them to the mailing list after running them deployed for a little to clean them up and make sure they work as expected and verify the builds that are failing are not due to bugs in the autobuild-run tweaks themselves. They don't usually get looked at for a while in patchwork so I haven't really been bringing them up on the mailing list until after I've tested/deployed them myself for a little, I have a couple pending in patchwork at the moment for autobuild-run for example: https://patchwork.ozlabs.org/project/buildroot/patch/20220607231211.533086-1-james.hilliard1 at gmail.com/ https://patchwork.ozlabs.org/project/buildroot/patch/20220718043901.873466-1-james.hilliard1 at gmail.com/ Sometimes I override genrandconfig as well to test patches such as: https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ I have a local patch to autobuild-run that redirects to an out of tree genrandconfig so that I can test tweaks there. I also have it validating that the in tree version of genrandconfig hasn't changed by comparing against a known sha256 hash before using the out of tree tweaked version to ensure that autobuild-run automatically falls back to using the in-tree genrandconfig if genrandconfig gets changed/fixes in upstream buildroot. For autobuild-run changes that increase error rates significantly due to higher rates of bugs which need fixes in buildroot I sometimes have held off on sending them as patches until the rates of errors triggered get low enough that it would make sense for others to use those changes as well. In this case I was also holding off on a patch automatically enabling shuffle mode to autobuild-run as using that feature currently requires running a yet to be released version of make and was triggering a few issues in buildroot that needed fixing on the buildroot side. I also figured that by testing master make using the autobuilders we can get make issues fixed upstream before the next make release, such as this shuffle mode bug so far: https://savannah.gnu.org/bugs/index.php?63215 What sort of autobuilder changes would you like me to discuss on the mailing list before deploying? I tend to experiment a bit but am usually pretty careful to make sure that my autobuilder tweaks only cause build failures due to real bugs that need fixing in buildroot/buildroot packages. > > > Well builds were mostly failing in the same place due to deterministic > > build ordering, I was trying to make it so that we would see failures > > in different places as that's more useful compared with always seeing > > the same errors. > > > > To me seeing the same errors most of the time indicates there's some > > major coverage issues with the autobuilders which need fixing. > > I think you're missing a point here: many of the builds today are > failing due to the glibc 2.36 bump. So pretty much every single build > that is glibc based will indeed fail with some error related to this > glibc bump. Probably a lot were failing for a couple days due to this glibc bug: https://github.com/buildroot/buildroot/commit/b749d6dd7b5fc6cc8b85a316878721d42654759c There's probably some failures still due to this issue but most of the others seem to be dependency bugs in package makefiles: https://patchwork.ozlabs.org/project/buildroot/patch/20221016193014.3384022-1-james.hilliard1 at gmail.com/ However I'm actually referring to a separate issue with test coverage that has always been present. > > Your additional randomization will not change anything to this. It's > just that we now have the glibc bump issues + the newly discovered > issues related to the extra randomization + the usual amount of build > issues. When I brought patch up this on irc: https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ arnout mentioned: 2022-07-25.log-[03:28:02] Lightsword: about the build time: I think the issue is that if you increase the number of selected packages, you also reduce the number of successful builds (because it fails as soon as one failing package is selected) - and that way, packages that get built late (i.e. that come late in the alphabet and have no reverse dependencies) don't get built. This is indeed the case when I tested increasing the probability further, however by randomizing the dependency ordering using make 4.4's new shuffle mode we should be able to mitigate the alphabetical ordering bias issue and thus get better test coverage of packages with larger dependency trees by increasing the number of selected packages while using shuffle mode. Looking at the current autobuilder failure logs I'm seeing that most autobuilders other than my own have much lower build failure rates and not much variety in terms of failure reasons due to poor coverage of packages with larger dependency trees. For my own autobuilders running with shuffle mode I'm seeing much higher failure rates for different reasons so these changes do appear to be increasing out test coverage overall, there's a lot of issues with makefile dependency ordering that are new and I suspect once those are fixed we'll be able to get much better overall coverage of more common issues, especially issues hit when running parallel builds. > > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 19:01:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 21:01:42 +0200 Subject: [Buildroot] [git commit] package/openssh: fix hash of LICENSE file Message-ID: <20221017190300.6A2B186E83@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=291c6c27adaf75ffd1d84b920e1ed79c3f84cc13 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The bump from 9.0p1 to 9.1p1 in commit bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa forgot to update the hash of the license file. The license file change (detailed below) does not change the license terms of OpenSSH: --- output/build/openssh-9.0p1/LICENCE 2022-04-06 02:47:48.000000000 +0200 +++ output/build/openssh-9.1p1/LICENCE 2022-10-03 16:51:42.000000000 +0200 @@ -231,6 +231,7 @@ Eric P. Allman The Regents of the University of California Constantin S. Svintsoff + Kungliga Tekniska H??gskolan * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions Fixes: http://autobuild.buildroot.net/results/697cdcea128c3716c9ae81be6c97937ebd80a5da/ Signed-off-by: Thomas Petazzoni --- package/openssh/openssh.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 81cea32d2c..eefb11ec15 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ # From https://www.openssh.com/txt/release-9.1 (base64 encoded) sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated -sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE +sha256 05c30446ba738934b3f1efa965b454c122ca26cc4b268e5ae6843f58ccd1b16d LICENCE From ps.report at gmx.net Mon Oct 17 19:10:48 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Mon, 17 Oct 2022 21:10:48 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017073953.510219-1-luca.ceresoli@bootlin.com> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> Message-ID: <20221017211048.43d2394c@gmx.net> Hello Luca, *, On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > From: Luca Ceresoli > > This package fails building with a kernel >= 6.0 [0] due to internal API > changes [1]: > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > 709 | roam_info.channel = notify_channel; > | ^ > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > 710 | roam_info.bssid = cur_network->network.MacAddress; > | ^ > > There is currently no fix in the github repository, and it's probably not > worth fixing because, as the Config.in help text states: > > This is needed only for Linux kernels before 3.12. > Since 3.12, there is a (staging) driver in mainline, with a > similar codebase. Despite the buildroot help text the rtl8188eu code base is still maintained see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream versions tend to support different feature sets regarding IBSS and/or monitor mode etc. - not sure about this one but valid for some other rtlxxxx ones), Regards, Peter [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > is 4.9. > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > Cc: TIAN Yuanhao > Cc: Petr Vorel > Cc: Peter Seiderer > Cc: Heiko Thiery > Cc: William Wennerstr?m > Cc: Ezequiel Garcia > Cc: Bernd Kuhls > Signed-off-by: Luca Ceresoli > --- > DEVELOPERS | 1 - > package/Config.in | 1 - > package/rtl8188eu/Config.in | 21 --------------------- > package/rtl8188eu/rtl8188eu.hash | 3 --- > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > 5 files changed, 54 deletions(-) > delete mode 100644 package/rtl8188eu/Config.in > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef3d..b1e84edd5e9a 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > F: package/exim/ > F: package/libpjsip/ > F: package/qpid-proton/ > -F: package/rtl8188eu/ > F: package/snmppp/ > F: package/stm32flash/ > F: package/unzip/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97d3..d95a6ac4e3fb 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -573,7 +573,6 @@ endmenu > source "package/rpi-userland/Config.in" > source "package/rs485conf/Config.in" > source "package/rtc-tools/Config.in" > - source "package/rtl8188eu/Config.in" > source "package/rtl8189es/Config.in" > source "package/rtl8189fs/Config.in" > source "package/rtl8723bu/Config.in" > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > deleted file mode 100644 > index 76d90852976a..000000000000 > --- a/package/rtl8188eu/Config.in > +++ /dev/null > @@ -1,21 +0,0 @@ > -config BR2_PACKAGE_RTL8188EU > - bool "rtl8188eu" > - depends on !BR2_s390x > - depends on BR2_LINUX_KERNEL > - help > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. > - > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > - config option enabled. > - > - Note: this package needs a firmware loading mechanism to load > - the binary blob for the chip to work. > - > - https://github.com/lwfinger/rtl8188eu > - > -comment "rtl8188eu needs a Linux kernel to be built" > - depends on !BR2_s390x > - depends on !BR2_LINUX_KERNEL > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > deleted file mode 100644 > index 9c7f2de4b61e..000000000000 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ /dev/null > @@ -1,3 +0,0 @@ > -# Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > deleted file mode 100644 > index ebce4617ac5c..000000000000 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ /dev/null > @@ -1,28 +0,0 @@ > -################################################################################ > -# > -# rtl8188eu > -# > -################################################################################ > - > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > -RTL8188EU_LICENSE_FILES = COPYING > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > - > -define RTL8188EU_LINUX_CONFIG_FIXUPS > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > -endef > - > -define RTL8188EU_INSTALL_FIRMWARE > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > -endef > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > - > -$(eval $(kernel-module)) > -$(eval $(generic-package)) From yann.morin.1998 at free.fr Mon Oct 17 20:14:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 22:14:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Message-ID: <20221017201444.GE3666@scaer> Norbert, All, On 2022-10-17 18:49 +0200, Norbert Lange spake thusly: > Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > But so far, we do not have that technically better solution, so we need > > to fix things that are arctually broken. > I tried to bring that in for ages. Probably just have cooked up a patch instead. Indeed, with a patch to look at, it is easier to discuss. I've seen the files now, and indeed I remember I already saw something like that some time ago... I'll test it in our use-case @work tomorrow. Ultimately, I wonder if your solution could be an alternative to the var factory, rather than replace it. > I consider managing patch-series time consuming, so I'd like to discuss > the way this should be structured before. > This could be one completely separate package for example, allowing > different solutions. I am not sure separate packages in the way to go. If we were to do those various solutions in different pacakges, then we'd have to make it easy for users to use a package from their br2-external trees, which is not so nice. Also, see below: we already have a package where it is interesting to implement the systemd integration in Buildroot: skeleton-init-systemd. > > initrd is a blockdevice in memory. The filesystem one puts in there can > > be any filesystem that could be otherwise stored on another blockdevice. > > initramfs is a filesystem in memory, like a tmpfs. The initramfs is > > read-write. > Ok, I am using those pretty much interchangeable, > just some block you tell the bootloader to load, either cpio or filesystem. They are not the same thing at all, and they are not interchangeable; the underlying code is totally different. [--SNIP--] > > I'll be sure to do as unbiased a review as possible for your proposal > > when I see it. ;-) > Gonna take me few days. should be easy to test tough with the provided files, > just throw them into the buildroot filesystem overlay. > Helps if you make some assessment where they should fit. the > systemd package is already bloated enough. Yes, our systemd.mk is a bit bloated. What I'd like to do, is that the systemd integration at the package level is done in package/systemd/, while the choices we do in Buildroot, like using a var factory, calling systemd-tmpfiles, or using an overlayfs, etc... be done somewhere else. We have the merged-usr at the init level, and that is handled in the skeleton-init-systemd package, and the var factory is also handled there, so I started moving more stuff in there, like the systemd-tmpfiles call, because I don't see a better place. So, if you don't have a better idea, skeleton-init-systemd would be where we handle that. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From giulio.benetti at benettiengineering.com Mon Oct 17 20:18:04 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:18:04 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Message-ID: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1b60dbc11d..c102ddc911 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1154,6 +1154,7 @@ F: package/nfs-utils/ F: package/python-uvloop/ F: package/qt5/ F: package/rockchip-mali/ +F: package/rtl8188eu/ F: package/rtl8189es/ F: package/rtl8723bu/ F: package/rtl8723ds/ -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:18:03 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:18:03 +0200 Subject: [Buildroot] [PATCH 1/2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..1cad263ee3 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 2f333604b39745a003b4a3c87bda3adcc0efd68100dff4aa3b54ae7992fc0143 rtl8188eu-77c1b083c5eb8336a2381aee20add496d1c96b51.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..460bcba460 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = 77c1b083c5eb8336a2381aee20add496d1c96b51 RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:19:07 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:19:07 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: <1c48aafc-8a01-77d1-7728-db80e7acdfb3@benettiengineering.com> Hi Luca, Peter, All, On 17/10/22 21:10, Peter Seiderer wrote: > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > >> From: Luca Ceresoli >> >> This package fails building with a kernel >= 6.0 [0] due to internal API >> changes [1]: >> >> .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: >> ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? >> 709 | roam_info.channel = notify_channel; >> | ^ >> ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? >> 710 | roam_info.bssid = cur_network->network.MacAddress; >> | ^ >> >> There is currently no fix in the github repository, and it's probably not >> worth fixing because, as the Config.in help text states: >> >> This is needed only for Linux kernels before 3.12. >> Since 3.12, there is a (staging) driver in mainline, with a >> similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), I agree with Peter. There are other rtl* drivers that I've recently fixed by bumping or adding local patches that now are pending upstream: https://patchwork.ozlabs.org/project/buildroot/list/?series=&submitter=77479&state=*&q=rtl&archive=both&delegate= and I've also added myself to maintain them in Buildroot. I've just sent the patch for bumping it to latest version and another to add myself to the DEVELOPERS file as co-maintainer. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > Regards, > Peter > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > >> >> Kernel 3.12 is 9 years old now, and the oldest kernel currently supported >> is 4.9. >> >> [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ >> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d >> >> Cc: TIAN Yuanhao >> Cc: Petr Vorel >> Cc: Peter Seiderer >> Cc: Heiko Thiery >> Cc: William Wennerstr?m >> Cc: Ezequiel Garcia >> Cc: Bernd Kuhls >> Signed-off-by: Luca Ceresoli >> --- >> DEVELOPERS | 1 - >> package/Config.in | 1 - >> package/rtl8188eu/Config.in | 21 --------------------- >> package/rtl8188eu/rtl8188eu.hash | 3 --- >> package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- >> 5 files changed, 54 deletions(-) >> delete mode 100644 package/rtl8188eu/Config.in >> delete mode 100644 package/rtl8188eu/rtl8188eu.hash >> delete mode 100644 package/rtl8188eu/rtl8188eu.mk >> >> diff --git a/DEVELOPERS b/DEVELOPERS >> index c0e6f8bbef3d..b1e84edd5e9a 100644 >> --- a/DEVELOPERS >> +++ b/DEVELOPERS >> @@ -1810,7 +1810,6 @@ F: package/agentpp/ >> F: package/exim/ >> F: package/libpjsip/ >> F: package/qpid-proton/ >> -F: package/rtl8188eu/ >> F: package/snmppp/ >> F: package/stm32flash/ >> F: package/unzip/ >> diff --git a/package/Config.in b/package/Config.in >> index e3a34d6e97d3..d95a6ac4e3fb 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -573,7 +573,6 @@ endmenu >> source "package/rpi-userland/Config.in" >> source "package/rs485conf/Config.in" >> source "package/rtc-tools/Config.in" >> - source "package/rtl8188eu/Config.in" >> source "package/rtl8189es/Config.in" >> source "package/rtl8189fs/Config.in" >> source "package/rtl8723bu/Config.in" >> diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in >> deleted file mode 100644 >> index 76d90852976a..000000000000 >> --- a/package/rtl8188eu/Config.in >> +++ /dev/null >> @@ -1,21 +0,0 @@ >> -config BR2_PACKAGE_RTL8188EU >> - bool "rtl8188eu" >> - depends on !BR2_s390x >> - depends on BR2_LINUX_KERNEL >> - help >> - A standalone driver for the RTL8188EU USB Wi-Fi adapter. >> - This is needed only for Linux kernels before 3.12. >> - Since 3.12, there is a (staging) driver in mainline, with a >> - similar codebase. >> - >> - Make sure your target kernel has the CONFIG_WIRELESS_EXT >> - config option enabled. >> - >> - Note: this package needs a firmware loading mechanism to load >> - the binary blob for the chip to work. >> - >> - https://github.com/lwfinger/rtl8188eu >> - >> -comment "rtl8188eu needs a Linux kernel to be built" >> - depends on !BR2_s390x >> - depends on !BR2_LINUX_KERNEL >> diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash >> deleted file mode 100644 >> index 9c7f2de4b61e..000000000000 >> --- a/package/rtl8188eu/rtl8188eu.hash >> +++ /dev/null >> @@ -1,3 +0,0 @@ >> -# Locally computed >> -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz >> -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING >> diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk >> deleted file mode 100644 >> index ebce4617ac5c..000000000000 >> --- a/package/rtl8188eu/rtl8188eu.mk >> +++ /dev/null >> @@ -1,28 +0,0 @@ >> -################################################################################ >> -# >> -# rtl8188eu >> -# >> -################################################################################ >> - >> -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 >> -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) >> -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) >> -RTL8188EU_LICENSE_FILES = COPYING >> -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m >> - >> -define RTL8188EU_LINUX_CONFIG_FIXUPS >> - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) >> -endef >> - >> -define RTL8188EU_INSTALL_FIRMWARE >> - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ >> - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin >> -endef >> -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE >> - >> -$(eval $(kernel-module)) >> -$(eval $(generic-package)) > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Mon Oct 17 20:37:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 22:37:25 +0200 Subject: [Buildroot] [git commit] package/python-django: security bump to version 4.0.8 Message-ID: <20221017203747.E1B6586E92@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5b5d3befef9c92a7485c1c68989d95749882ee2a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ - CVE-2022-41323: Potential denial-of-service vulnerability in internationalized URLs (4.0.8) https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ Signed-off-by: Peter Korsgaard Signed-off-by: Thomas Petazzoni --- package/python-django/python-django.hash | 4 ++-- package/python-django/python-django.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-django/python-django.hash b/package/python-django/python-django.hash index bfc9219c7e..72adc30bb1 100644 --- a/package/python-django/python-django.hash +++ b/package/python-django/python-django.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/django/json -md5 ad4e850c7110a45a6c7778d5bd01b85e Django-4.0.6.tar.gz -sha256 a67a793ff6827fd373555537dca0da293a63a316fe34cb7f367f898ccca3c3ae Django-4.0.6.tar.gz +md5 75ec07b3e00c79fd6e67fbee53786b7a Django-4.0.8.tar.gz +sha256 07e6433f263c3839939cfabeb6d7557841e0419e47759a7b7d37f6d44d40adcb Django-4.0.8.tar.gz # Locally computed sha256 checksums sha256 b846415d1b514e9c1dff14a22deb906d794bc546ca6129f950a18cd091e2a669 LICENSE diff --git a/package/python-django/python-django.mk b/package/python-django/python-django.mk index d49c845d54..567d590f77 100644 --- a/package/python-django/python-django.mk +++ b/package/python-django/python-django.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_DJANGO_VERSION = 4.0.6 +PYTHON_DJANGO_VERSION = 4.0.8 PYTHON_DJANGO_SOURCE = Django-$(PYTHON_DJANGO_VERSION).tar.gz # The official Django site has an unpractical URL -PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/a4/17/b10aa26d7a566a3c19e9d29fac39c8643cbceb6cd7649a378d676839b5db +PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/1a/de/08d8a349ed0e3e1999eb86ae0347cc9eaf634cd65f1eb80b9387ac1dbe3c PYTHON_DJANGO_LICENSE = BSD-3-Clause PYTHON_DJANGO_LICENSE_FILES = LICENSE From giulio.benetti at benettiengineering.com Mon Oct 17 20:38:28 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:38:28 +0200 Subject: [Buildroot] [PATCH] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 Message-ID: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> Let's also drop local patch in favor of the upstream pending patch we already use for package rtl8189es to deal with endianness. Fixes: http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ Signed-off-by: Giulio Benetti --- ...TRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 +++++++++++++++++++ ...1-Makefile-remove-default-endianness.patch | 30 -------------- package/rtl8189fs/rtl8189fs.hash | 2 +- package/rtl8189fs/rtl8189fs.mk | 9 ++++- 4 files changed, 48 insertions(+), 33 deletions(-) create mode 100644 package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch delete mode 100644 package/rtl8189fs/0001-Makefile-remove-default-endianness.patch diff --git a/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch b/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch deleted file mode 100644 index 47e42415eb..0000000000 --- a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 480d9da302885d9e8b3d1f9c68def569e3c8a8c0 Mon Sep 17 00:00:00 2001 -From: Sergey Matyukevich -Date: Mon, 9 May 2022 00:17:21 +0300 -Subject: [PATCH] Makefile: remove default endianness - -There is no way to remove configuration options from EXTRA_CFLAGS -without editing Makefile. So default LE configuration can not be -conveniently replaced by BE. Remove default endianness from the -Makefile to enable its configuration via USER_EXTRA_CFLAGS. - -Signed-off-by: Sergey Matyukevich ---- - Makefile | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/Makefile b/Makefile -index dfca305..fde4e6b 100644 ---- a/Makefile -+++ b/Makefile -@@ -22,7 +22,6 @@ endif - - EXTRA_CFLAGS += -I$(src)/include - --EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN - EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT - - EXTRA_LDFLAGS += --strip-debug --- -2.35.1 - diff --git a/package/rtl8189fs/rtl8189fs.hash b/package/rtl8189fs/rtl8189fs.hash index d5d18a8ba8..1ab41db553 100644 --- a/package/rtl8189fs/rtl8189fs.hash +++ b/package/rtl8189fs/rtl8189fs.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 41eee18d8a4289c2eac07af3224c62214a9b694a717bf497cd34a95b955f3d49 rtl8189fs-94a61cbf46ce87b7c9b8aa53123aeb142133a3c9.tar.gz +sha256 7cc80cb85ed6e7f7d5480e6094c377d3dbcd18a57b58cfba43a7e42ea59fc8d3 rtl8189fs-c93cfd712a3acd2ecdeda19a66d269c20f8803f1.tar.gz diff --git a/package/rtl8189fs/rtl8189fs.mk b/package/rtl8189fs/rtl8189fs.mk index 1c398919ba..8b7618fcc8 100644 --- a/package/rtl8189fs/rtl8189fs.mk +++ b/package/rtl8189fs/rtl8189fs.mk @@ -4,15 +4,20 @@ # ################################################################################ -RTL8189FS_VERSION = 94a61cbf46ce87b7c9b8aa53123aeb142133a3c9 +RTL8189FS_VERSION = c93cfd712a3acd2ecdeda19a66d269c20f8803f1 RTL8189FS_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189FS_VERSION)) RTL8189FS_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189FS_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189FS_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189FS_MODULE_MAKE_OPTS = \ CONFIG_RTL8189FS=m \ KVER=$(LINUX_VERSION_PROBED) \ KSRC=$(LINUX_DIR) \ - USER_EXTRA_CFLAGS="-DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN" + USER_EXTRA_CFLAGS="$(RTL8189FS_USER_EXTRA_CLAGS)" define RTL8189FS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:55:45 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:55:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Message-ID: Pardon, I've checked better the commits and this version fixes build failure with Linux 6.0.0+ but it introduces a runtime bug by removing code for Linux versions < 6.0.0. So I need to send another patch with a previous commit SHA1 and create and send upstream a patch to fix the bug. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas On 17/10/22 22:18, Giulio Benetti wrote: > Fixes: > http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > Signed-off-by: Giulio Benetti > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > index 9c7f2de4b6..1cad263ee3 100644 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ b/package/rtl8188eu/rtl8188eu.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > +sha256 2f333604b39745a003b4a3c87bda3adcc0efd68100dff4aa3b54ae7992fc0143 rtl8188eu-77c1b083c5eb8336a2381aee20add496d1c96b51.tar.gz > sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > index ebce4617ac..460bcba460 100644 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ b/package/rtl8188eu/rtl8188eu.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > +RTL8188EU_VERSION = 77c1b083c5eb8336a2381aee20add496d1c96b51 > RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > RTL8188EU_LICENSE_FILES = COPYING From giulio.benetti at benettiengineering.com Mon Oct 17 21:12:39 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 23:12:39 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: References: Message-ID: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- V1->V2: * use specific upstream commit SHA1 since the latest is buggy --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..ff8c0a3418 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..99f8248c05 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 17 21:13:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 23:13:08 +0200 Subject: [Buildroot] [PATCH] package/python-django: security bump to version 4.0.8 In-Reply-To: <20221017172918.1737004-1-peter@korsgaard.com> References: <20221017172918.1737004-1-peter@korsgaard.com> Message-ID: <20221017231308.04f97bda@windsurf> On Mon, 17 Oct 2022 19:29:17 +0200 Peter Korsgaard wrote: > Fixes the following security issues: > > - CVE-2022-36359: Potential reflected file download vulnerability in > FileResponse (4.0.7) > https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ > > - CVE-2022-41323: Potential denial-of-service vulnerability in > internationalized URLs (4.0.8) > https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ > > Signed-off-by: Peter Korsgaard > --- > package/python-django/python-django.hash | 4 ++-- > package/python-django/python-django.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From petr.vorel at gmail.com Mon Oct 17 22:21:59 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:21:59 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: Hi all, [ Cc Larry, the maintainer of the downstream module fork ] On Mon, 17 Oct 2022 at 21:11, Peter Seiderer wrote: > > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > From: Luca Ceresoli > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > changes [1]: > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > 709 | roam_info.channel = notify_channel; > > | ^ > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > | ^ > > > > There is currently no fix in the github repository, and it's probably not > > worth fixing because, as the Config.in help text states: > > > > This is needed only for Linux kernels before 3.12. > > Since 3.12, there is a (staging) driver in mainline, with a > > similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), This downstream code also supports AP mode, which module in staging does not support. Given that Larry supports 6.0, I don't ack this change. I'll try to send update to 0a5e81555c5e9dc16030598d4e11f8f1dad541be soon. Kind regards, Petr > > Regards, > Peter > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > > > > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > > is 4.9. > > > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > > > Cc: TIAN Yuanhao > > Cc: Petr Vorel > > Cc: Peter Seiderer > > Cc: Heiko Thiery > > Cc: William Wennerstr?m > > Cc: Ezequiel Garcia > > Cc: Bernd Kuhls > > Signed-off-by: Luca Ceresoli > > --- > > DEVELOPERS | 1 - > > package/Config.in | 1 - > > package/rtl8188eu/Config.in | 21 --------------------- > > package/rtl8188eu/rtl8188eu.hash | 3 --- > > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > > 5 files changed, 54 deletions(-) > > delete mode 100644 package/rtl8188eu/Config.in > > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > index c0e6f8bbef3d..b1e84edd5e9a 100644 > > --- a/DEVELOPERS > > +++ b/DEVELOPERS > > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > > F: package/exim/ > > F: package/libpjsip/ > > F: package/qpid-proton/ > > -F: package/rtl8188eu/ > > F: package/snmppp/ > > F: package/stm32flash/ > > F: package/unzip/ > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97d3..d95a6ac4e3fb 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -573,7 +573,6 @@ endmenu > > source "package/rpi-userland/Config.in" > > source "package/rs485conf/Config.in" > > source "package/rtc-tools/Config.in" > > - source "package/rtl8188eu/Config.in" > > source "package/rtl8189es/Config.in" > > source "package/rtl8189fs/Config.in" > > source "package/rtl8723bu/Config.in" > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > > deleted file mode 100644 > > index 76d90852976a..000000000000 > > --- a/package/rtl8188eu/Config.in > > +++ /dev/null > > @@ -1,21 +0,0 @@ > > -config BR2_PACKAGE_RTL8188EU > > - bool "rtl8188eu" > > - depends on !BR2_s390x > > - depends on BR2_LINUX_KERNEL > > - help > > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > > - This is needed only for Linux kernels before 3.12. > > - Since 3.12, there is a (staging) driver in mainline, with a > > - similar codebase. > > - > > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > > - config option enabled. > > - > > - Note: this package needs a firmware loading mechanism to load > > - the binary blob for the chip to work. > > - > > - https://github.com/lwfinger/rtl8188eu > > - > > -comment "rtl8188eu needs a Linux kernel to be built" > > - depends on !BR2_s390x > > - depends on !BR2_LINUX_KERNEL > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > > deleted file mode 100644 > > index 9c7f2de4b61e..000000000000 > > --- a/package/rtl8188eu/rtl8188eu.hash > > +++ /dev/null > > @@ -1,3 +0,0 @@ > > -# Locally computed > > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > > deleted file mode 100644 > > index ebce4617ac5c..000000000000 > > --- a/package/rtl8188eu/rtl8188eu.mk > > +++ /dev/null > > @@ -1,28 +0,0 @@ > > -################################################################################ > > -# > > -# rtl8188eu > > -# > > -################################################################################ > > - > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > > -RTL8188EU_LICENSE_FILES = COPYING > > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > > - > > -define RTL8188EU_LINUX_CONFIG_FIXUPS > > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > > -endef > > - > > -define RTL8188EU_INSTALL_FIRMWARE > > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > > -endef > > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > > - > > -$(eval $(kernel-module)) > > -$(eval $(generic-package)) > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From petr.vorel at gmail.com Mon Oct 17 22:34:31 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:34:31 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: On Tue, 18 Oct 2022 at 00:21, Petr Vorel wrote: > > Hi all, > > [ Cc Larry, the maintainer of the downstream module fork ] > > On Mon, 17 Oct 2022 at 21:11, Peter Seiderer wrote: > > > > Hello Luca, *, > > > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > > > From: Luca Ceresoli > > > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > > changes [1]: > > > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > > 709 | roam_info.channel = notify_channel; > > > | ^ > > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > > | ^ > > > > > > There is currently no fix in the github repository, and it's probably not > > > worth fixing because, as the Config.in help text states: > > > > > > This is needed only for Linux kernels before 3.12. > > > Since 3.12, there is a (staging) driver in mainline, with a > > > similar codebase. > > > > Despite the buildroot help text the rtl8188eu code base is still maintained > > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > > versions tend to support different feature sets regarding IBSS and/or monitor > > mode etc. - not sure about this one but valid for some other rtlxxxx ones), > > This downstream code also supports AP mode, which module in staging > does not support. > Given that Larry supports 6.0, I don't ack this change. I'll try to > send update to 0a5e81555c5e9dc16030598d4e11f8f1dad541be soon. I see Giulio has reported the problem in upstream and send v2 patch to Buildroot => solved. Kind regards, Petr > > Kind regards, > Petr > > > > > Regards, > > Peter > > > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > > > > > > > > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > > > is 4.9. > > > > > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > > > > > Cc: TIAN Yuanhao > > > Cc: Petr Vorel > > > Cc: Peter Seiderer > > > Cc: Heiko Thiery > > > Cc: William Wennerstr?m > > > Cc: Ezequiel Garcia > > > Cc: Bernd Kuhls > > > Signed-off-by: Luca Ceresoli > > > --- > > > DEVELOPERS | 1 - > > > package/Config.in | 1 - > > > package/rtl8188eu/Config.in | 21 --------------------- > > > package/rtl8188eu/rtl8188eu.hash | 3 --- > > > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > > > 5 files changed, 54 deletions(-) > > > delete mode 100644 package/rtl8188eu/Config.in > > > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > > > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > > index c0e6f8bbef3d..b1e84edd5e9a 100644 > > > --- a/DEVELOPERS > > > +++ b/DEVELOPERS > > > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > > > F: package/exim/ > > > F: package/libpjsip/ > > > F: package/qpid-proton/ > > > -F: package/rtl8188eu/ > > > F: package/snmppp/ > > > F: package/stm32flash/ > > > F: package/unzip/ > > > diff --git a/package/Config.in b/package/Config.in > > > index e3a34d6e97d3..d95a6ac4e3fb 100644 > > > --- a/package/Config.in > > > +++ b/package/Config.in > > > @@ -573,7 +573,6 @@ endmenu > > > source "package/rpi-userland/Config.in" > > > source "package/rs485conf/Config.in" > > > source "package/rtc-tools/Config.in" > > > - source "package/rtl8188eu/Config.in" > > > source "package/rtl8189es/Config.in" > > > source "package/rtl8189fs/Config.in" > > > source "package/rtl8723bu/Config.in" > > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > > > deleted file mode 100644 > > > index 76d90852976a..000000000000 > > > --- a/package/rtl8188eu/Config.in > > > +++ /dev/null > > > @@ -1,21 +0,0 @@ > > > -config BR2_PACKAGE_RTL8188EU > > > - bool "rtl8188eu" > > > - depends on !BR2_s390x > > > - depends on BR2_LINUX_KERNEL > > > - help > > > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > > > - This is needed only for Linux kernels before 3.12. > > > - Since 3.12, there is a (staging) driver in mainline, with a > > > - similar codebase. > > > - > > > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > > > - config option enabled. > > > - > > > - Note: this package needs a firmware loading mechanism to load > > > - the binary blob for the chip to work. > > > - > > > - https://github.com/lwfinger/rtl8188eu > > > - > > > -comment "rtl8188eu needs a Linux kernel to be built" > > > - depends on !BR2_s390x > > > - depends on !BR2_LINUX_KERNEL > > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > > > deleted file mode 100644 > > > index 9c7f2de4b61e..000000000000 > > > --- a/package/rtl8188eu/rtl8188eu.hash > > > +++ /dev/null > > > @@ -1,3 +0,0 @@ > > > -# Locally computed > > > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > > > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > > > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > > > deleted file mode 100644 > > > index ebce4617ac5c..000000000000 > > > --- a/package/rtl8188eu/rtl8188eu.mk > > > +++ /dev/null > > > @@ -1,28 +0,0 @@ > > > -################################################################################ > > > -# > > > -# rtl8188eu > > > -# > > > -################################################################################ > > > - > > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > > > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > > > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > > > -RTL8188EU_LICENSE_FILES = COPYING > > > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > > > - > > > -define RTL8188EU_LINUX_CONFIG_FIXUPS > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > > > -endef > > > - > > > -define RTL8188EU_INSTALL_FIRMWARE > > > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > > > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > > > -endef > > > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > > > - > > > -$(eval $(kernel-module)) > > > -$(eval $(generic-package)) > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From petr.vorel at gmail.com Mon Oct 17 22:36:43 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:36:43 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: Hi Giulio, all, Reviewed-by: Petr Vorel Kind regards, Petr From petr.vorel at gmail.com Mon Oct 17 22:39:04 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:39:04 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: Hi Giulio, Thank you! Kind regards, Petr From james.hilliard1 at gmail.com Mon Oct 17 22:45:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 18:45:39 -0400 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-15 In-Reply-To: <20221017141843.0d7d2963@windsurf> References: <20221017141843.0d7d2963@windsurf> Message-ID: On Mon, Oct 17, 2022 at 8:18 AM Thomas Petazzoni wrote: > > Hello Paul, > > This is happening on James autobuilder, who has introduced some special > randomization stuff that would only appear with make 4.4. I have added > James in Cc so that he can comment and see if he can reproduce and > provide more details. This should fix it: https://github.com/viveris/uMTP-Responder/pull/85 > > Best regards, > > Thomas > > On Mon, 17 Oct 2022 12:18:20 +0100 > Paul Cercueil wrote: > > > Hi Thomas, > > > > I can't reproduce, with this build's defconfig on latest master. It > > just builds fine here. > > > > Cheers, > > -Paul > > > > > > Le dim., oct. 16 2022 at 05:38:19 -0000, Thomas Petazzoni > > a ?crit : > > > Hello, > > > > > > Autobuilder failures > > > ==================== > > > > > > Below is a list of build failures reported by the Buildroot > > > autobuilders > > > in relation to packages or CPU architectures you are in charge of. > > > Please help us improving the quality of Buildroot by investigating > > > those > > > build failures and sending patches to fix them. > > > > > > Results for the 'master' branch > > > ------------------------------- > > > > > > Build failures related to your packages: > > > > > > arch | reason | > > > url > > > -------------+--------------------------------+--------------------------------------------------------------------------------- > > > arm | umtprd-1.6.2 | > > > http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d > > > > > > > > > Thanks for your contribution to Buildroot! > > > > > > -- > > > http://autobuild.buildroot.net > > > > > > > > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From james.hilliard1 at gmail.com Tue Oct 18 03:46:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 21:46:05 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-generic.mk: fix rule order for re{install, build, configure} Message-ID: <20221018034605.800593-1-james.hilliard1@gmail.com> These command rely on the clean operations being first so that the stamp files being deleted will rebuild the targets. The execution ordering of the clean and rebuild operations may change, for example if --shuffle=reversed is set. To ensure the evaluation order is always correct use double colon rules to make the evaluation order explicit as per make docs: The double-colon rules for a target are executed in the order they appear in the makefile. Signed-off-by: James Hilliard --- package/pkg-generic.mk | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk index f24e03a325..6cb461af90 100644 --- a/package/pkg-generic.mk +++ b/package/pkg-generic.mk @@ -1057,17 +1057,20 @@ endif rm -f $$($(2)_TARGET_INSTALL_IMAGES) rm -f $$($(2)_TARGET_INSTALL_HOST) -$(1)-reinstall: $(1)-clean-for-reinstall $(1) +$(1)-reinstall:: $(1)-clean-for-reinstall +$(1)-reinstall:: $(1) $(1)-clean-for-rebuild: $(1)-clean-for-reinstall rm -f $$($(2)_TARGET_BUILD) -$(1)-rebuild: $(1)-clean-for-rebuild $(1) +$(1)-rebuild:: $(1)-clean-for-rebuild +$(1)-rebuild:: $(1) $(1)-clean-for-reconfigure: $(1)-clean-for-rebuild rm -f $$($(2)_TARGET_CONFIGURE) -$(1)-reconfigure: $(1)-clean-for-reconfigure $(1) +$(1)-reconfigure:: $(1)-clean-for-reconfigure +$(1)-reconfigure:: $(1) # define the PKG variable for all targets, containing the # uppercase package variable prefix -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 18 05:43:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 18 Oct 2022 05:43:02 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-17 Message-ID: <20221018054308.D5A2F82F37@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-17 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 13 | 1 | 0 | 14 | 2022.08.x | 11 | 11 | 0 | 22 | master | 101 | 491 | 7 | 599 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 29 bearssl-0.6 | 27 berkeleydb-5.3.28 | 26 ca-certificates-20211016 | 24 host-gcc-initial-11.3.0 | 20 crun-1.5 | 19 libnss-3.84 | 17 coremark-pro-1.1.2743 | 16 host-f2fs-tools-1.15.0 | 15 sysvinit-2.99 | 13 slang-2.3.2 | 11 host-binutils-2.38 | 10 xz-5.2.7 | 10 autofs-5.1.8 | 8 host-gcc-final-11.3.0 | 8 libarchive-3.6.1 | 7 linux-6.0.1 | 7 fbset-2.1 | 6 brltty | 5 btrfs-progs-5.16.2 | 5 efivar-38 | 5 freeradius-server-3.2.0 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 5 host-sentry-cli-1.59.0 | 5 libee-0.4.1 | 5 casync-4ad9bcb94bc83ff36cfc... | 4 dash-0.5.11.5 | 4 frotz-2.54 | 4 gpm-1.20.7 | 4 host-binutils-2.37 | 4 host-gcc-initial-12.2.0 | 4 host-rust-1.64.0 | 4 igd2-for-linux-2.1 | 4 musepack-r475 | 4 openssh-legal-info | 4 systemd-250.4 | 4 unknown | 4 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 flite-2.2 | 3 gerbera-1.10.0 | 3 host-riscv-isa-sim-1.1.0 | 3 libglib2-2.72.3 | 3 libgpg-error-1.45 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musl-1.2.3 | 3 python3-3.10.7 | 3 a10disp-0.6.1 | 2 batman-adv-2021.4 | 2 dieharder-3.31.1 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 gmrender-resurrect-0.1 | 2 gobject-introspection | 2 gobject-introspection-1.72.0 | 2 host-gauche-0.9.12 | 2 host-gcc-final-12.2.0 | 2 host-gcc-initial-10.4.0 | 2 host-vde2-2.3.2 | 2 libcurl-7.84.0 | 2 linux-5.10.145-cip17-rt7 | 2 linuxptp-3.1.1 | 2 mariadb-10.3.36 | 2 nanocom-1.0 | 2 ocf-linux-20171122 | 2 openswan-3.0.0 | 2 python-cryptography-38.0.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 aespipe-2.4f | 1 assimp-5.2.5 | 1 bat-0.19.0 | 1 botan-2.19.2 | 1 bullet-3.21 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 cryptodev-linux-1.12 | 1 dahdi-linux-5c840cf43838e06... | 1 edid-decode-188950472c19492... | 1 exempi-2.6.1 | 1 fftw-quad-3.3.8 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /tm... | 1 gitlab-runner-14.5.1 | 1 google-breakpad-c85eb4a59b6... | 1 gsl-2.6 | 1 host-berkeleydb-5.3.28 | 1 host-delve-1.8.0 | 1 host-gcc-final-10.4.0 | 1 host-gdb-arc-2020.09-releas... | 1 igh-ethercat-1.5.2 | 1 ipmitool-1_8_19 | 1 kexec-2.0.25 | 1 kmod-29 | 1 lcdproc-0.5.9 | 1 libgcrypt-1.10.1 | 1 libmdbx-0.11.12 | 1 libselinux-3.3 | 1 libuhttpd-3.14.1 | 1 lighttpd-1.4.67 | 1 linux-5.10.145-cip17 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 memcached-1.6.16 | 1 micropython-1.19.1 | 1 neard-0.18 | 1 ntpsec-1_2_1 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 opensbi-0.9 | 1 package/openssh/openssh.mk:... | 1 pcsc-lite-1.9.8 | 1 perl-5.34.1 | 1 postgresql-14.5 | 1 proxychains-ng-4.16 | 1 pv-1.6.20 | 1 reaver-1.6.6 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8821au-4235b0ec7d7220a63... | 1 sdl-1.2.15 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 sslh-1.22c | 1 sudo-1.9.11p2 | 1 trace-cmd-2.9.7 | 1 traceroute-2.1.0 | 1 tstools-08f6be304040e7b8476... | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 xfsprogs-5.14.2 | 1 xserver_xorg-server-21.1.4 | 1 xxhash-0.8.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ccde8b572665b7706609de31f59b52bd76fda85f | sh4aeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/2aba72407c72d8b3542edc4197ac4dcf7715172c | sh4aeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/15076cf6f0398300c4d61a999df5d865a9d4b39c | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1c7a230bbf49619a61e9ce5e48e5b88ccace61da | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1432838e844f3f0138a22ab45c45db2b160cac80 | mipsel | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/a11147ca0c84658eaf7b7dadd5bf09755b31637e | mips64el | aespipe-2.4f | NOK | http://autobuild.buildroot.net/results/05854c018585f4e862ab4bd242e7ab8cef38fb27 | ORPH arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/6346b41000582126cfca9521b58930ae46544f1b | ORPH sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/dbd94b000ba0fdcd5ad659124e12c1ee7a26a68b | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b72b9b5edba27f4ef6b691d38dc8bb46860bce4d | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/31989a46d9b7d535000901fa7e420f5246647584 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/322421d68a57a6d2e485f090bd14616eb1e8d958 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d94ff1d28ed7d3d6395e3c00dad9a571f722b2f4 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/49cd6d3183b76c11241150144ee933b5c8aa3448 | arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/397c6a9a7b7919e14a4f4be4c75562533f987473 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d8925a2be31c64d2d07f1c32a831f7f13457fc89 | aarch64 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/e5c6bf2e05c5371fb3e33cbe9c258538873373fd | arm | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/35f2c14365d089611e0e279e55caa01493976ad9 | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/c2446ff26fb4322f95aa0df19aef98dbf60d78bf | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2ca4372000b8eaf73eee268f0016b460b64e0e76 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d7952b5e3ca7b4d42fa6bd0d1aed7cfe571e21d4 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/09d7d7ec6e5104e2c16c60df4268cf282fd77054 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6bd8121e109e04a2e7f306c4ccfeff2296251caf | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/73e33d68167e0a356e2859905354f92a051b3e1f | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0b5eedd43458e50c4cc5b9a9128c0a448150cce3 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/59e6d74b6c1464a10f14ce1fa095ea90aff6f912 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8880f768a79e5dccc9725ee03e9478340d02bddf | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b795e04e4551b4c3078fb239d3122be93b379110 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/aa1d507ffd97c588bad145b9c476ca0de5a1efdf | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9d3f41c29c5a02d103fc9d8b3169f359cf40ad5b | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e3f812c0fd943ca98901001958f9351b36c75b28 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/90bb166570be3520f103347ef08998d2aad2973e | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b59214833cd729ba3465caebab09323b4c8d0497 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/976fb63452021267bcb5f4aba45d4659abe079b2 | i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/50a4012050344df0533bc706a3d2132bec8d60b9 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/04d01772dcdce014b5901740e890532f50911fd1 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c84ef183be5d3b7468f9fc37e74bdebea177ca12 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/88550b540e087b6d36c9656696253d4cadd79866 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/96b45bd89bbbb10b925db1d292c690c8cc7c57c9 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ad29e53e02cf2c3ff3ca6d2459f214895915e565 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/adf3e9419d027c5eb11a30cc6e886c92aa58ea1d | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9b7a06eecea0856fd211c30c4b8bea40d315f5cb | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a1ef42018e817d1c96d294bab145b60f491fe0b7 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/86e40f65b3c2d4c4b019e8320f0c5117847e256f | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d0568e07d19f3ccb31329ab12d260b096e6f776d | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0bde18b907511bf08b5f023f5e37fd3b98e7daed | aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6e81a79739cd4dabaf82efa7e09594f0585ca5a8 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/784b7b4961057a57e1d1a7f83f8e546cb3d11fca | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/838398252d70c29dc7976783f81c7d1f6bec1e56 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f7ac9e2de616da98ad6a1ab32ca4adc9c2cc7976 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2700ca6862d431e8ef5970a09c459569cb2d68a8 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2548d4d63fee0489916fd25ae4aabdaa243c0a81 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7cd30625555a2cf7ed9a0eebee51d2cbf78efc8d | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/01aace8f3d420392b14f416227558466fa4a0dc0 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/91a74eaf16e085c9e2a31c1b17db8010f0bc2520 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/460438a98eaadfb49de4dd0d2e2b4ee1fc536de7 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/da15b83bd23715670e3e2436d8b99f9a4621b066 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d1b98fc17fbdf91e81bee445dafa2fc73435384f | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/158e62067f51bab374264a3f45069db99a053755 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7d7015a51d7d49f8941c10c7c1cca371868b0ccd | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c57b8b6bea92def75e3684d4f08191376f457f17 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/119a571dead6d51f9d073a37f533a4e099ddab69 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5e34f072da78bc4406be617d56d5d9f5a3f89a9f | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0dd5e0cef4e0b6c6fa4bc11d633c384bdc333be6 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/83185e407dec41e75cba9ed05474c45652736209 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a74620095658e27cba8ac5ba82e95e67181a0d4b | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6aa53cc38c2a7bcb1389697bd19c22285a44225c | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a4b2117b5060137680e2898d4820b2cace480be6 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3d199c1e104408ed82749def2acfa6ae136a28e4 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c3586f81409b3ffbc270937273930c4cf65f1d6a | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/729121352d2207d769dc47eef8570703cd397a46 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8e1105ef45ad848b20c5bddd78b6168ecd46f62e | ORPH i686 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8f46b301d0403fc4d1e5e2707254f37229492b9c | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/ccde49c55331dad1b4d7b3bc61997385662b1417 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/2d9e2bfa9eb727c77d3234873867eb13deffee62 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/327c191aeaa39452daf602c4ff07c923d5c58e5e | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/76c712692f79cf78ccc8a984674c5bce0b43bea4 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/df55617b51c206030d2b259353ac02e57c7b2a31 | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/de1dbb02b5e2dbd6e5a2fbe959f3868be264dd30 | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/68a9bc79ee6cab9830003bb1c9bd03a4f5148c77 | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/56470e894fe8bd43c4aacbabef31929f61653b64 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/27e4b79a21c13c07139ae79ebe3212d74e5ba499 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dc1e6019ae96e20a9e2df46b90fd1122a622be32 | ORPH arm | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/654cf31016d9bdd6cf40c882494fd56f2a1a9c8a | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/764983ca58cf57acf551c09f16773f6a7deb988a | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/646add5c8c5c3f423567f094403e3b2c21b59b28 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b1568e10ce5dc994065e7b7c2ca0bf2f39134982 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/765dafc414910ffca88d52b794d0b7ee72126c13 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2627cddf6323010d5a67d533583e9ab4bb2817c0 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/913bf43bb055101abee7b4b3e6a41233427bbdcd | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c28c916109d0d7e75ffd26da2396c9c9aef13d1 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5f5ef166df1094dafa8116403f9219e2c4516719 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/89b5217070ac8fad3a8b6b650106c4f4e186359f | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9dfa3a69a175fe11763827287aadb81d0c243fc9 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ff971a0420357035b2f1d7c295c79393a6939dad | riscv32 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3284017d23814bbe2ff2b6fcf4e498213ec49395 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/43959de9bc152da4871e80db4000271e3336a3d0 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/186536583c6e9d80cdf29e70a779188482e6331c | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/eb07de9f285816b91cd1d81fede736579dc87240 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fc524dc2dce2eddf29fba1325025fae320013ddf | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6ace158836455f9d83f0369ee83713b1f179d3b1 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3654ce570db6fad2b3ef37ba768e824137abff76 | riscv32 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c7651be55ea276fbaf6d950f478ca6d5fb881724 | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/12ceddf332b88af50cfacb648f63dc5d008931cb | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b215ce31bf281d3cc38dc5e6266c8b97f5a8c8f3 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a60925489dd4f6586740282d671da6a2f0991b5c | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/30ca9037014f83a39120639897d014ce471a6842 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/db747fc2af7999fd724d0a4bdb0135d766d15451 | or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/adbe409bb7be953be0dc1d7f92ddc6476f4dac87 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/20da34e901aa48be326e048f862e25f2dc04fdfc | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/eb216af55e4c123f77e13ab41174d2f5b7a90668 | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/02c643bcded168e46363681279250853b4960105 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/7d10b124a6348b88eb37679be2d55f4a90577cd4 | sh4a | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/caee1ee0625c9aa691edb97c03e50123eb4611e7 | ORPH xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5dcf26c4f5b5af20667b632c06fba5ae8ac30ff1 | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/572b727121e3d3bba7905d7babaee6e72997ec5c | sh4 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e00b09c80ebd05c75908dfe2126612fedbea0227 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0ef82a3e69821751df51cf56e0dae3819244b7ef | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4ab521ac4cb2c9316826e999e977841e4b6f0c45 | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8205454645cd291cfa10a69fa624638a5d0cf040 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a5aa7e5df05a5ad57955cfdca25903944eef6d52 | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2bae52d42b8fd6b57ac7772e4068591068c8acc0 | sh4aeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f8c58b3d68e2ba161a9485201fe723b73d776fe4 | sh4a | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/647eec840e2e9afdb6ac3e2907a0b5c081cabbbb | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/38c816bd9944de1a39e3e1723219e4c87b5cf617 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1756b7bfcabfdfa5ba54e165f7d956ac414d9f77 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/44741c0ea5a98c8e00aa9e0141b1145c21887575 | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f4b093bf99dfd732f2400b0cbf9bf1ea38ec82fb | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7b46923272bbccf21c530041c78c6d8469271bf3 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f669b69cc9ec9262e611b40d78423df4d512627d | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bc4f4688c5c39288443c5048f9ebb893477ecb30 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9d1794ec2aefc0f3129aaad016e0813ee8c3e9e1 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/79fd95e17abde9522c9693351023708235796a51 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5248df36f96c177e52586757b1a2af22f5d0c716 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c295f18720129e04878f63f1f1e7c77f82075c11 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/680fcf46a4b1d41050d28c5caf0097d988d21435 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/26ed2a35d789e9024e52b600e4f37bc02424f8d1 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/08ed63c69a1e9090b7ec5413254b2c281da6d02e | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0570c10c25c015ebceacbf81ffc72a6894a9aa4 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b1be0d6082ef3561cf7eeffb045504f3299edad1 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a024920a63fa182dbde0ee6a0cabdc8c3c68c49 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d6a090998a52b9e0c9607d1cd037fa28bb471348 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/40673369babb97d9254b59ef0c90c198bfad57ab | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ccaaae720829342bdaab00e4c6fdb81aa9c8eede | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b75e9a00e37339bab4e78b7fbbc77e0d34e6ff6c | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/084063429080229f466b78c77cb42c1c6c924b06 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8f98716d9c61dc91cf0fd61eb7c9a3f734aa812b | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cd39689beb38203c1fd76aba847ae76fe3ccac57 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d3ecdd1b92a7042a9b275d02e9d337b92eab2764 | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/dec4d7e1748ee62f2c11df2f3f5cf404ed315502 | ORPH powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5a586b13a086f03e0c43f738ea1d0240ff544457 | or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/9b1c5b96c1da8c7a2f91913f1db406c1222bc108 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e4336a800e700f090049042f39dfd46ff417b6d | ORPH microblazeel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d94b04dae7e087c11b30fef8e5f77d42dc2f3ac5 | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/61c8a6afce5d7662cf512072fb897d540e176fbf | ORPH powerpc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/4381fa03d0812bbc12c5b00d411016cc069540a8 | riscv32 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/be8273de61f05b0d03737345a3d4f818417c01d5 | mipsel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/970fe77f299a6f1ab43601cb9f814a76df586407 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/089748114d0fff3f2ccf04451a89d1af33c4a883 | ORPH arceb | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/5564b40d0fef4cb10a7c9283796233322e8e160c | ORPH riscv64 | edid-decode-188950472c19492... | NOK | http://autobuild.buildroot.net/results/1691e2b6f2c813acd30d2f7bd0390ba57e1ec388 | ORPH x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/00f675184b2ff44f98e5c9c43a077e6802f04cd4 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/aeead2e53a7908124e6e65ccaa03c4b7bad99cc1 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/560053295dcb29177ac904e14d6511f7cd67e02e | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/117c95e7fb4919902ba3c97bd1cfd6428d10f879 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/03dc08172077d66feb57231a77d69e10f5153620 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/c23f14e967752a598caadc269b8acbd99d97df3b | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e78a7a8dbd55d1701152349cf15a753b58556049 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2ff3047d4f0d5418d85a344b1cea186a200e9f6a | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3cad876bc64afd7cd3d497dfdc0499e05ad6f76b | nios2 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/caf8cc20cc3d702ce12e45a85dd9b92d811fd146 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/7ffbfc40c55a32f699ba1574cfb987a73022220d | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5c18b2b3c876879bbdfb737c107482b85dfd7543 | ORPH arm | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/8abeca7a81aa536e4797f369e1efe5ebaf7aeb03 | ORPH arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/45d03a7f2065212cd939a52074f139230d803002 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/54f0ea2264264eb98b8bfd7e8549c938feb928e6 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/aae47543c3683fa4d491f61e1756b0ed8f6cdfef | ORPH aarch64_be | flite-2.2 | NOK | http://autobuild.buildroot.net/results/6c8b17887e1f067a69ef06ec413be5ab2b581211 | mips64 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4db00cfd5fd29d57a755ce8ec064124df55fb0e1 | nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/e4e47a55293e26812d0cd582d11ca5abb7767dbc | aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/eafc7b5556d9c24957cadbfc2b7554f2f924798e | powerpc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b2c5f723047d8d7d4ed8cade3c57860b0a270c91 | mips64el | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/18bbe5b17004db7109c66944866060a70fb515b9 | powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1af82902387d96cbbffa55d5be78b237a197944f | aarch64_be | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/acb42b2e673e7c590b5d97cd9c5dc31ac897097e | s390x | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b1c140c9d61f707fc36c2cbbe8e741c58753e836 | xtensa | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/9c17eab18085fcf30fa2ec3e9afff059af46c865 | riscv32 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/76896ac2e4f0e1001705836d0bf00debe5894e14 | mipsel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/ba20a37bb001045d1df647ef7e0904f4aafc7752 | powerpc | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/19b34a119d05ea851470d7440205c3cc0936b9aa | arc | fs/cramfs/cramfs.mk:46: /tm... | NOK | http://autobuild.buildroot.net/results/034b43b07b0f28648d785fc21554b786a2424b55 | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1a61540725a26b62c81a79e03f75237b334b92a1 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4625d56a9e20b1cd7f11b7bb6b0c6a239669effa | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0f8c05661f3f27351a1ea28eebdee7242e7a44e6 | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/721a0d8f534c63d4211e53afe261a7984ed9f511 | mips64el | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/292b926b2ac46507fd1f4b9158c6f7939dd4e712 | i686 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/99996e8e685a965002076296ef727c107d09fbca | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f0743377f0bc52d88af6c62ecef622bfff44e48 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d75fec6fb7c83be84275c785c03b1cf59a5c981 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96716ce0d2ca5b1543bd1539ec2e726e837389a1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1680631301fcc0a94a3f1e29c40982c140e7865 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98c0a0ad5c0e850eba958cf0752b8474894a8ab9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8a047e5de255dce193d9ba6f41caf016480c524 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/080b4ce2bcfb0434dc5ebdf0cbd77f58b855f573 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5deaa7ba3ee50034e4e574d4be35dd3546f53df4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8de14be47f388934c1712b343a1631b69899ba2 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c1b6303b3a92291e16a446f992428cd149d2de2 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b642d6ec95de3e9499c5305873c844715bee2f8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23f623f5fafbba5fb3d5129d9e3cd8c409f9547a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca7fd069a67097e456257e91ec08bb9c1e8b049a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ab8ec24e1ac36b4511906ff9295a429ef115e5e | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e84a51bf559ece8ed9f26e2114be6149eefe4ee | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7aa8c9a8596afcbee8a4a0f63137410b85ef0e5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac4e5aee75ccd1ed63912aa9bc4071edca5cb5f9 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/444d9b174fc9041fdeda460bd075c7a268c48444 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70efa1adb476228715577a3f7ac95b661c1f8fa1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34c9ef1ad7cff93881dcf3a796f05f27ec7806ff | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9113039dcc63ad938f0f5a8ddedc996606f47229 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0522c67f9dcd9f6b11ce1ef9562a10ba251a196 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/809a80a459799b42ad3a9d6dcbdb6e7b381fe387 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f03b3be4ee989446e91376487b6b1408ac7c7f5 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b637f9bb6785eeb9be24f8326ff4e88a7766b3be | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5e08309300dd2d18a061e768f540c27a6cb7687 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5a9b7dba2671de705f678d6251675f1b2ca49c2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc723732fc974a71da0afab281d186410e8ca137 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7fa06ec2052baf392bd06e389ab75a54a65656 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9c1715e186676d5e29b771c6b7b7cb91a7b89eba | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/8397b7229c7dad785f92a4f7d07666cde873fefd | ORPH arm | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/2c4c967a5bf06203a5a872381133a9edaf33c495 | microblazeel | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/f1468e2f3fb183b8ba72cc0cd7b5b87877c98a15 | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/5bbb9b03ceb450d5d19202d4a0087213894ff8e2 | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d77850839d22477c1f36c70a91f271345743cc97 | nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/bc19f818197c25de6a127fbd948fd5c4bcc8031d | ORPH mipsel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c1ca46c66d24f021ceb601a04f2bb151339356fb | ORPH mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/dcfaa5ac532a96a02f5471f02ad8e44b2a67f2a8 | armeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/08dc3658254b1f367b0d84ef48d8eac461ca93d8 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/319c7d97c5f6b86d8bd4cd03087a429c1f40576d | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/347e509cd70438113dd636d9294a9263c7e5a1f2 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/6dba98ea2c24827992bce41427cb6f327acb90c9 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/5dbfc34299c8c87af56d390ba2c130cb378f5ee2 | ORPH powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bfac7a59c50d74f9f69ab11392bd2b1fddf03cef | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/89458004a87d1ea543c9329d4e524bc684cfb0ca | mips64el | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/6adfa63b0b1a3f04741ab0e024b961bc73b89566 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e862073cb7af1023a3e01fea4a23b6bfba61b6b8 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/9a4c7232a9c3e98dff62d1a0a21b98302f76d559 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7f7c37cd8babfa8e8dbed5ae82c79f52fae2f4f1 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/747d885fe8652ef59f0f051e8a6fdc907f7e7a1d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/90ee1cf2b90c2e94ac2e5f0f412c12da20dfccf7 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc299d29a628c0ea97a095af3115e1a3e5c32206 | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b5cdde4c913fc904b88175dd80d9e14201d2599 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cf66d4924ffc2402e5bdbbcd39ce0f6582d2d4f7 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ebe966b557ac3a73076666e5bfad396065700140 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/691febc93c5e906fbdb106142c9fdb851554e2e0 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e6902c1a17f88c7b9f00caa6a0f6466bc00d646a | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2ca48d0eb17e6aa7be090a4f9afe69066c5f073a | mips64el | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/9a15100cdb71e99d46975ef4c0aba0e285b96d5c | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ae67954a79fe2e247b7633d86ec37d5b172ae010 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8f3f545dab08571b0c42986ddef8732222603fd4 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2c011e3a951d26fd3e188f3b55daac4c6105750d | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cbbb7d06a47030d536cc8c3a0346f0b75925d0b9 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/72d1ae56b67a32accfb9b70ad62b6703fb52ff65 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4bc6cbfab7ac8f5c757386554a0a4e0edd28397e | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a43224b9e9f0c80cbe48ccef8ae9c620f6844a65 | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cee8284496acd2a9d1809a7e82ca946795e6ad7c | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f22fd4d967bb4c52adf94564da3809495d7ac5c5 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f117dcf5d83c7f120aa97affbbdcebda577b7492 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f2aca8ac27aaf55f69cfd0ea7ca74453645148ac | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b990fd917da900e98d77debf16f9cc6de779f313 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b34f6a12cac944da7cd2e59a4c2d5179c77f7392 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6bee7e8318aef6147456062731a7221d173d5bd4 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/06fb6322af092438022be829bd06cb2684d7f1fb | mips64 | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/25f601a2eb6486ce824a5a4d7d739a4fe328d03b | powerpc | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/ac1b850f3aff9e6e247901f0719052d37ba7ba98 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/611c0038673fe8ed274c007e7cca955431bc3594 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eaba79a273834b7d7833d64b829ed47b55eb5b8a | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ede2a763def116ec39a55e280bbc3191fed14567 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e9c49426cbdfd9d048490374ab44919d8a6d671e | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/254b98e459d5043a859982b171d378182c139f59 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f32d8a65c8e001c0af61dd31ab984c4b1fc8f25 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6ceeec25350bdd7386f47519a7449ff3612698e8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/701cc3a3613c2c1785862903747dd49cc0c3b0d3 | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/52480cff54459df6b20d9329012047b9d4ea3480 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/2a2534fc99bfc641ef53df5a27d0e39590ecd732 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f4ebd14d8c297fbdbff3fb8485172711bcde56d | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/31f11b497ad0d329db9ce51074afdc3a9320e93c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9daa82e084433fe71a10d8bb528e681bcb08b4fe | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/931a567a44a12eda2a49ab0e3bad899bf46dbc3d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/520087dfeaf68bc178ec01f59f96298733c23e67 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6cfc84d81e46765970f29116d81ea1500000079d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1fed9ab739e67007c663b795b48c3a8b13a14ae8 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a20b5b57d64ff944ae80a57ba68c9c0414fbbdf6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/50dbcb381975b6ed80e96ae552a0039e5fc36632 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c2917c027ed2ba16fd77278757981452cfafad5e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/03cb39500d5f94f7bd22ebb86c9ff748ca54653a | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c072d9951f60761239ab0e91f9fffa9c74c04a47 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/90b0d41707409cb261b280e66460895b625485c5 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ee92f15208d040e0e3a6d595646eba2f886cb4d1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3fdc604b906ef4b30d2a3eb7193c031e47eb529c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f61011e273b5bbf84d57867b9f6be2958b583814 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/faeb0bfe9a59007a5b691817ad6038d3d8e59057 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b55a2bc7cfbb50cb33c2d0f4ee83882ac67e9365 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0fabc060e2902e1661f354e24364b90deaa33025 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/24fe9aa5521646649dc2c4a08a7b744c4a3e9ef9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c0862cad1f0dfa85267128283e44d85cb05aab1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/50202e5e1ca2c09be1257682d6e3656371885480 | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c1c7a9f153c4e0edc41acf4e8947544fd2f64a1a | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/a482398dbdfda6ac62e651d1953ca19e86b062c2 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/53797681f1a77d640c7b1eab68566a1b5100bd27 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/0a13b252c667b6008e50a978e9cbd526ca6988b1 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/e96445404d27d7b2288d16121252e0e836b6eb54 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/95f45e1da4cb57945b79d14817ff6b159f2026c6 | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/be1f025a22d253f6afcdc6c74d9b531a0ee1d048 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/feaa4fc4b3b5086a5c36ade49a9a7636acc6010b | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a6f2a3c68a4d78abe6b9fb3a92f63a6bdcf21258 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/15739067ba9cc8fa7fe6374ea5521e37468059d8 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a3fc00d2b82e4c0d598afb4010726d024f475113 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f14a82ffe106b2822957a8ddb8db76802a3a7959 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ff369eef7cd30d9865e19cc62fa66279fd9e40e1 | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c382e745dca8c96d846f1cc6fcbafbf005c8254d | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5dce7d57c113ef4926e8577180875e5f1dbb901e | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ad7ec5a4ec612868958d22e889f4a9d037bcf87c | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/f3cd2d4da199475f2d7922ffece36b1021509bfd | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/c95c27a8d6868f6eff61d2b31afa0e5261303de6 | riscv32 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/4ae8eba3d06cd8ba7705bddd3c44facbfe58f273 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/78ab32fcd16bc41d5d029404f9a5713567513d7d | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/b681bf164f440e5ddc9c59a152eff0aabbc70365 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9b11784506dfb6337d09f7fab5726ecf8a8d28c1 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f51380cfba08462a7b50542e08c7f78b9f47805c | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b57d2e98cbd5ea112cd58d0cd7cd3b1b9054e5af | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6a713c772580952ea1a96cd3b449a9675892d699 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/466af2806bbc3394ccd2ad566e1142dc367520c7 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e7ee3d3db08dd315fe16bf6759e03b1d97f27193 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9c00b055f388d0eabc7231994103e0d7f10f132e | xtensa | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/23e0698570bcf23d8dad1780eea766c7d854c55a | sparc64 | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/cdda25021ff5d3660d5742d6c3ece5883b66835c | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c416a6f700d72a023c13e0aefb9a7765acb4f063 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/83491dc6df40aa77332c52e457c5aabfac4d7104 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2393b07bd5c5f03451c4d064e0faa3f007e1762b | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2ec380a0fe4fc0d1d8f6fe5bfd9b689b5340815 | riscv64 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/c842aa11250870eab55543faf3cf166d7dd66186 | sparc | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/da0ba97e91a426637a429c07110c1a78b47f550a | arm | kexec-2.0.25 | NOK | http://autobuild.buildroot.net/results/7311d7959209078b719375ae05da98311d05ff42 | ORPH xtensa | kmod-29 | NOK | http://autobuild.buildroot.net/results/ee0586b02d0669fedd65df5e8faea5b9261dbf26 | sparc64 | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/588fb82780e918724ba8fe561965ac9539058ee3 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5223e7326b6a967c8dbc4d266372e437f2c58c69 | riscv32 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9f1bd06d80ddebcd5445905bfe648057bb639573 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/89f0f7e29686f301c5f48d84ebfc2fd1bf12d501 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/be2db5a6fc2cc674b7942d5ea410fc01fff36172 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5a18b5a12cba34a7b92c0c48e5c388925a2324db | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a3262669f0c1b9d2233f3453153460229363809e | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/772d90a11b593c157073469361cfe2342b9186b7 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/9c22decedccb1e5afc2941a9f2ad60b00b3881da | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6e03ec16cb42b85a9bb0cbde36242cf39d68de02 | powerpc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/17b1a72840f6faee07f6cf60aa0dce0891c0d0b4 | arceb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/d8ac678d2705f81e8afa574dfdcfa36f0d643402 | microblazeel | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/ed64629e4a84540a3bbb499de588a335a58d2ccf | riscv32 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/18fa55ed3ab5c0105a7a5f3423b493498af67a45 | aarch64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/324ce32bbadccd79ebbb91f018960ec3b0395c1b | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/960938d34d7c652998d59c3abd68462be05b850f | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9469b32858e5dd0621ab9562887115a423d3d2c0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/07ea9e984e0cb6c41f29d11e5d12126b362cce93 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4ca44ce6e8399ae49a5f591c282d5aa4ba911bb1 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/b303d596a87bc981a7d238bc319cdd799e1243f9 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/456696ed86adaec34aa3020d0dbf22c9c6d8aa74 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6be838ae5482cd70dd0a2f6991a2dd9c58985c42 | ORPH or1k | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/5b7fa9f5c1e2db0c1de9669d4c675201776d8d53 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8110ef20f2800b52bf38725e8163763c6e33b322 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87f76a410407b3d390e00bf56cf278c645099464 | xtensa | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/515ad0923b61ac1d31fe94d8b1df57cfd81d514e | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f881de15fdb3791da15d49acbd83626a0937e606 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4335d0d8454035a8f74645ba8d6c2329ab2e5480 | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c5b029195de2422d1b1ab54613f7ee57ee49debc | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3288e2795e1ef06bf3294ab14e3cf8ca2a019240 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5263940f97f91cc0ba043c6e0eec4dc66a72309f | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c2c3f09e89c95ea47a1d975723247dcb58b5b3cc | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/52f04375b6e0f6a5e5743ff6b688942f343bb503 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/450d7a0278394dbf61454d15fb622265ee7c0177 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/53133870543b7727c4e5814773e42b49d53d5edf | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/db9a85f8f902aac41c27303506e0529e59d1a391 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/35bde8bc36ebfdc45ddb218f654178ddad8330d1 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/245ef91350180f3a89125c4c8dd19d8fc535379b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/46547379ada30a74694d2b100b790714ac9d5361 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3b1305c39910e7d55c02a9f249a5eed0d5a0848d | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/1ee6d81286ab91c97d39e9ddbd0c5af7180b6527 | sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/82422df9f99e0604474e35dada2f8937066f5f5d | ORPH riscv32 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/fb4add9ab9a8d508e8a66e29a1b424e97becaaf2 | ORPH sh4 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/3f6b4e2d796c3181e3fd795f77bb0829bbcc9202 | ORPH powerpc64 | libuhttpd-3.14.1 | NOK | http://autobuild.buildroot.net/results/e448ca55eba195cfd54f1bebdb92bebc6078d525 | arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/777ab55a58c92005e43177d5f76b39a3c0c75cd6 | aarch64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/c57005cf8d1ce7fcaea927e8365da3993231089b | ORPH powerpc64le | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/cab10c07ecaad69b939182c0659b1b9b8b517856 | ORPH riscv64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/7a96737e37c0e9d5c38bf98a395606563b35730c | ORPH sparc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/be3749f6f8a66e10672765b4dcb757bc9f0a2e2d | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e41c0fc65e1bdcf6edfeeef49dd790cbc862b49a | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7c3356ae2a6546d87fd3bc95ac77632b4bee2c07 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/62e517581cc723d087a8ac98481b95304256f51c | ORPH arceb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f7cd4a117435f3cd3fbf0d011678171cfcc54f43 | ORPH aarch64_be | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/18297ae062ed5084327def6dcfed4856d5fa6c4b | ORPH arceb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d630c31c33b4e58c0ab4d1e19728f069c697dd68 | ORPH s390x | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/1d678e28059511c7b69a0922f22ed887f2a1a3a1 | ORPH mips64 | linux-tools | NOK | http://autobuild.buildroot.net/results/5d9fcff561f0c87b9c3052f3386092d7e670c06e | ORPH sh4a | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/743711bfddd3dacc0838fa0a8a89bc46d1a3911a | powerpc64le | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3d0b104088dc3cad55d345afc849c255678dad56 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/8671796a15e44a1090ad56d4b4254cea732ec8ec | ORPH sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/90a9bcba061b095a99eaa920c250e1973daf8b21 | ORPH s390x | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/154c0c760e9ae6e6144beef01ac50403ea65501a | ORPH aarch64_be | micropython-1.19.1 | NOK | http://autobuild.buildroot.net/results/d0611850c01940a1c225800feb27b539273fcc15 | or1k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a0164709cf385c6a761d00dac5733515274ec8ce | ORPH aarch64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/2837a96b6ca32bde4c17fcfa557bd4f65fd9a91e | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/138e5c18f69fd860a91d9a9dd7e85d0af0d9b86f | ORPH mips64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8a9bfa03d25dc1c79a05eb2dacc37368401883ae | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/f1e0c9138fd0d82172910e897b2f09c2da0d7a10 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/1c27d53e8bc344b34068cfdc3bd8186d22410616 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/988e9bb4bbdb01011f120f13dd453c1475d57c19 | nios2 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/4159d13ba1bf0af3f401ba62dfc87cb33988eff7 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/7023f3966e6121e96674b0dbdb2608ea78652293 | powerpc64le | neard-0.18 | NOK | http://autobuild.buildroot.net/results/ce19e02de84c5212d9d2d012ac939c8053c01508 | xtensa | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/d4872de407e3cee040831a665bfebfb91c002c74 | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/a5f04ad0b1b477d0bfaef4dfa14729e4b1b5cd7c | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/7ec7e3f7db32f340e144c9189351cb4bb7bb42d5 | ORPH powerpc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/f864eaed3dfce7b930b26d26da713f4f1ddcda94 | ORPH powerpc64le | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/4cf2eb3124509c8e07ee971659b4d1c320feb07e | riscv64 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/3cdee9dc4285a68d1af4030d4c0edfc2679874f6 | arc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/2a9d62d2f3ee00bb1a60658fe805eb075ed73d11 | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1a18781edf3922b5cda03734f081396d7d725100 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fe8c05833908372507d6a048293ed633261532f6 | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/697cdcea128c3716c9ae81be6c97937ebd80a5da | ORPH armeb | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/f3d86c0ca8493e1e7bf6153e95bbf75c5beabc30 | ORPH powerpc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/a6db918be120274cf321835f22776cc06a991673 | ORPH riscv32 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/51afe46e4aa14b8a60b27a2c43ec4ac12cbd7265 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/d42ca52cb55bbba1b88d0eefe568e51c00287424 | ORPH aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1f572b125ca771588d14bf14dd5c1a1c6ee10010 | arceb | postgresql-14.5 | NOK | http://autobuild.buildroot.net/results/a0a5d81aab60857011fc05a8e9abbed1edeaa934 | ORPH mipsel | proxychains-ng-4.16 | NOK | http://autobuild.buildroot.net/results/d7c50976c5b4514fa8a19c57509804767dd7610c | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/cc85ecb8432af1e67a041d06da710fdb77793007 | ORPH armeb | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/dec977009cdcd57f90e60d2a95509b0fae89160b | mipsel | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/325e206d83a4952ccc7148d1574e4d4103791b34 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/80206151b94a0dcc94138cee6f5bc0c9ef4ac578 | powerpc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/fd28805e4a72f750be50e9f8ef97f4d4532c3c50 | arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/0b7d52f98fd0ce9e8114f50b020c28905b4bd14b | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/0567c061175054554df1da7b3d23340df0758dde | powerpc64 | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/a26c4a1b71a7709f61b6e56a2265de80a9bdda67 | riscv32 | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/8424fb8a4db2afb98d057e0a8c26856168a84c8a | sh4aeb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d5dfec2ff1f9992545a402655600fcf4b758804f | ORPH microblaze | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/8ee67d743ad838229f856a46623742fba5e37a41 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/acb4a376a95de5560b1dbd630810f254f5277f10 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2e6e6e98fee6a00b3a95fa2278e74de4930d3cfd | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a9c26d9f11a8ccb00a12acb2ca5c41a8b6e7b0c9 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2b33425b673e45fa1780cf6d883b56eba473da74 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d380a693fa121d3230a379571fad3c2047ea5c0b | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c0abd26b8e709e68e6a761f3582dbf478c6cc6ad | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/74dfb81886a36279be7ab5c7abae61475d3830e3 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f47b0fb4a3e545860ccdb29f8450583fbf3a4e5b | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4dcb2a5ee47c08141175badbae6c1d30c6badc6c | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/34eb008322fe58c3be2a0830427e18f962e11b1f | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9a4dabff2292c532093802b997da40f15062cc97 | ORPH arm | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/6949d74ae207d7b60a2b9258ce385451d5396374 | powerpc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/bf16a81a113c143029ae24cf1b18a20883af9bd3 | ORPH s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7ddc967bd567666b0114db5ca1646444725da870 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/404ca85df92ecfdaf63859a01b99ae84b315cc67 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ea54efdc1c46ba0432c8b23b184f1e675ffecab3 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8414f09b7f5d67b2666e6fd68169986fd7d644d9 | mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e4743b288a311843d37d2bdd1c4950c356756325 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e2585502c4c6f033b7e00d682c57ae39022629d | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d8a50b06b9f56a01a68e17806d25c4e6e7a2a8a9 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/61f80df2f53722cf1632abff7604e3206337c80d | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a674b9ffb937ad94410e922873d101d8b3ba4f24 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8019c11782a6eaa0117f012f4f6ebe3d92a9097f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2ab8682247eab887b082cbe6fbe3b4c3647b05fc | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5d3f8b257546cc9a54e1ca72b4f5b7e2bd6bad60 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ea13027f05556c4cc72b3beb24d00c2131cb769f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c4b0fa8eb0e54a7161bd94f66b84055c5e0efb47 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a587de9e3f9925e8edab81400d35f9d91af4e028 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/33d502e8567323e42c08c152c4a83d0e84a7c7a8 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b7a7023d791396b09d897f5bead84758bf70ae3a | ORPH x86_64 | trace-cmd-2.9.7 | NOK | http://autobuild.buildroot.net/results/2563145366829525e224f0f81d0a1487560737b0 | mips | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/c7ba9fa3c160ab3473e0b0c91578123fd218ff3f | mipsel | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/64bcb232a04264969b7ac7f08b04f1f74f22c7aa | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/2a3769de75af4b176d3409e456d64500439f2def | sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/5f3f541d6db08d21c9798cd5d6cb9938d5fa048d | m68k | unknown | NOK | http://autobuild.buildroot.net/results/776a7167a00fed9e75490ee12ecef16d7cc528a4 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/db28a85bc6442ae2fc4631b40dc3c7032253c1fc | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/55e992d23131604504d2b7b2613acdbd6f627727 | mips | unknown | NOK | http://autobuild.buildroot.net/results/967776321f07ba5f28f71db79f3345e294355692 | mips64 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/743dd69be7b938a09a13d918765bb0824ba1ac21 | ORPH nios2 | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/50248dde36688832735a84f4a3eb11359f4f130a | nios2 | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/5e2e3a601aaacda50552dce05ea939d0c51ece80 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9a8e867641a6eadccf6d7ae7ed8f64d331708843 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2abf2bb11aa18582eed9d85ddfc1852e091b9ac6 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/cfecb14cd1e919a8e8271937a17548ae48dcf4e5 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8c30b20da1f3514ff4d2a34ad53e30386f68b54e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0f89be309f023fdbbdffeb1e109d8eb380675ae4 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/5f61c3a2368b602bba45eaee534cd8ee8f0f80bc | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f05ceacc5c59a2f842a6ba164a115c46222e8b8f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fc013e3291c6b85d8c6cf2b74672a2476acc82de | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7c42b5a046ed0c37a5ee7210a1069e43fbfe87c6 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8b0384eb57f23cb03bdb616c761c6cd2d4afeb18 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/d2e00bac317089990286e040b953efcaf245f661 | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- nginx-1.20.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- riscv32 | nginx-1.20.1 | NOK | http://autobuild.buildroot.net/results/2da3d372a49f074597c8265ef227ca9967af94eb | Classification of failures by reason for 2022.08.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 frr-8.2.2 | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 host-rust-1.62.0 | 1 ipmiutil-3.1.8 | 1 package/openssh/openssh.mk:... | 1 qt5location-db3b6bc6afed647... | 1 quickjs-2021-03-27 | 1 rtl8812au-aircrack-ng-4ab07... | 1 tealdeer-1.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/64bdda8458f80f30078e7fb9a8ae1ae104f5fb48 | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/f771a0c85e009d568836ec254e4d2441c1d9bd5a | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/874a88d9645efef9eaf2efbbf50c489d8e96604c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/cde9efa9c157fd9deff66c18a8a3385acb9444de | ORPH arm | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/b9a1123618683786d6885a71849e4a72fa9f6bfa | x86_64 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/95ccad4a8e32489eb2906ff232d19582ee97132a | x86_64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/00c87faa3b17f19793c94611f82f59b188a697b5 | microblazeel | qt5location-db3b6bc6afed647... | NOK | http://autobuild.buildroot.net/results/591ffbf101f4063dd95f476030ac43fd79a677ff | sh4 | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/c71453ec602a921995876b48958185c612302106 | s390x | rtl8812au-aircrack-ng-4ab07... | NOK | http://autobuild.buildroot.net/results/0b90061cea7ee22d5822214f081d14304ee5fcc4 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/44396f4433eb3ba07d212f0763cab396a4c7128f | Gitlab CI results for 2022-10-17 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908499 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908500 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908501 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908502 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908503 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908504 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908604 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180909384 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180909385 | ORPH TestGdbArc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908612 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908620 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908624 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908626 | ORPH TestInitSystemNone | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908556 | ORPH ...IfupdownDbusbrokerDbus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908581 | ORPH TestLuajitRings | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908928 | ORPH ...honPy3FlaskExpectsJson | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908867 | ORPH TestS6Networking | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908938 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908952 | ORPH -- http://autobuild.buildroot.net From thomas.petazzoni at bootlin.com Tue Oct 18 06:36:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 18 Oct 2022 08:36:32 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-4-thomas.perale@mind.be> Message-ID: <20221018083632.6f336ec6@windsurf> On Mon, 17 Oct 2022 09:13:54 -0700 Christian Stewart wrote: > Instead of adding new packages... > > Continue using "host-go" and add parameters under a menu config for it. > Then you can simply use a single variable - GO_VERSION - rather than 2 new > packages. > > I'm happy to send a prototype of this if you need. I also thought of doing this for the NodeJS package, instead of separating host-nodejs-bin and host-nodejs-src. I went for the virtual-package + 2 providers solution as this is what we had done with Rust. The main advantage I see with the single package solution is that the version of NodeJS would be located at only one place. Although this could also be solved by: package/ nodejs/ nodejs.mk <= contains the version nodejs/ <= virtual package nodejs-bin/ <= pre-compiled provider nodejs-src/ <= source-based provider In my proposal I solved this duplicated version by simply having a comment above the _VERSION field to remind people that the other package supporting NodeJS should be bumped at the same time. The advantage of the 2 packages solution is obviously that each package is simpler. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:43 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:43 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: <20221018085943.104f227f@booty> Hi Peter, Giulio, Petr, Thank you all for the feedback -- I see my patch worked effectively :) You all seem to know way more than I do, which is not surprising as I'm not actively using this package anymore. On Mon, 17 Oct 2022 21:10:48 +0200 Peter Seiderer wrote: > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > From: Luca Ceresoli > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > changes [1]: > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > 709 | roam_info.channel = notify_channel; > > | ^ > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > | ^ > > > > There is currently no fix in the github repository, and it's probably not > > worth fixing because, as the Config.in help text states: > > > > This is needed only for Linux kernels before 3.12. > > Since 3.12, there is a (staging) driver in mainline, with a > > similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), Good to know! Why not adding this info to Config.in too? It would avoid others trying to remove the package again. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:51 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:51 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: <20221018085951.5570b633@booty> Hi Giulio, On Mon, 17 Oct 2022 23:12:39 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 07:04:42 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 09:04:42 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: References: <20221017071002.48266-1-neal.frager@amd.com> <20221017155854.48220785@booty> Message-ID: <20221018090442.2cb7fda8@booty> Hi Neal, Michal, On Mon, 17 Oct 2022 14:15:16 +0000 "Frager, Neal" wrote: > Hi Luca, > > > Why are these binaries board-specific? I thought this used to be only > > needed for the "community workflow" before U-Boot SPL was able to load > > a pmufw cfg object. > > Good question! I had a feeling you would ask this. ;-) > In the case of the zcu102, zcu104 and zcu106, the pmufw binary is not board specific. The same pmufw binary will work on all 3 boards and even custom hardware, if a developer wants to use it unchanged. OK, I see. (@Michal) I compared the zcu102 and zcu106 binaries and they are different, thus I wondered. > But since the pmu reset gpios are customisable among other things, the kria kv260 actually uses a different pmufw configuration. And developers may wish to modify the pmufw for their target as well. > > Since the Xilinx firmware repository is created using the petalinux prebuilt images for each target hardware, we chose to have a pmufw.elf in each board directory to match what comes from the petalinux builds. Sure, knowing the process clarifies the reason for having different places for firmwares that are equivalent. > That said, since the Xilinx repository has a pmufw.elf in each individual board directory, I thought it would be cleaner for buildroot to use the pmufw.elf for each specific target. Even if the zcu102 and zcu106 pmufw.elf binaries are really interchangeable. Sure it is. Thank you both for the clarifications! Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 07:05:05 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 09:05:05 +0200 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-2-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> <20221017071002.48266-2-neal.frager@amd.com> Message-ID: <20221018090505.6bd09c80@booty> On Mon, 17 Oct 2022 01:10:02 -0600 Neal Frager wrote: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu106. > Details of the issue can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:53 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:53 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: <20221018085953.1c4d07a0@booty> Hi Giulio, On Mon, 17 Oct 2022 22:18:04 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti Thank you! Not sure it makes sense for this kind of patch, but since I discovered Giulio knows much better than me this package: Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.perale at essensium.com Tue Oct 18 08:03:30 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Tue, 18 Oct 2022 10:03:30 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> <20221017184442.GD3666@scaer> Message-ID: Dear Christian, Thomas, I also do agree renaming the 'go' package to 'go-src' is clearer. But then to not modify the content of `package/pkg-golang.mk` I will also need to move the variable used by `package/pkg-golang.mk` aswell as `package/go-src/ go-src.mk` to `package/go/go.mk` (for instance `HOST_GO_COMMON_ENV`, `HOST_GO_TARGET_ENV`, ...) or they will be renamed to `HOST_GO_SRC_*`. Correct me if I'm wrong but there is no way to predict the order of inclusion of '.mk' files, so `package/go-src/go-src.mk` might access to undefined variable. This is why I think a next patch should propose the same structure for `nodejs`, `rust`, `go` using subdirectories: package/ ?? go/ ? ?? go-src/ ? ?? go-bin/ ? ?? go-bootstrap/ ? ?? go.mk (<---- Contain the 'global' variable used by `pkg-golang.mk`, `go-src/go-src.mk`, `go-bin/go-bin.mk`) ? ?? Config.in Where `package/go/go.mk` is a virtual package that include the go variants: ``` HOST_GO_TARGET_ENV = \ ... HOST_GO_HOST_ENV = \ ... $(eval $(host-virtual-package)) include $(sort $(wildcard package/go/*/*.mk)) ``` This solution won't change `pkg-golang.mk` but since it introduce a new way to handle package variant I prefer to keep it for a next patch. PERALE Thomas On Mon, Oct 17, 2022 at 8:51 PM Christian Stewart wrote: > Hi Yann, > > Just to reply to that one question on why a host go compiler is useful- > > On Mon, Oct 17, 2022 at 11:45 AM Yann E. MORIN > wrote: > > > - host go compiler (see patch linked below) > > > > If we have a pre-built host-go in the tree, thetre is then no reason to > > be able to use the host system go compiler, is there? > > The host Go compiler may be compiled from source (i.e. Gentoo) and the > user (me) wants to trust the gentoo binary for Go over downloading > another precompiled bin from the internet. > > Thomas - > > On Mon, Oct 17, 2022 at 11:48 AM Thomas Petazzoni > wrote: > > - NodeJS (proposed by me) > > virtual package: host-nodejs > > pre-compiled package: host-nodejs-bin > > from source package: host-nodejs-src > > > > The odd thing here being that host-nodejs is a virtual package, but > > nodejs is a regular package building NodeJS from source for the > > target. > > > > - Go (proposed by Thomas Perale) > > virtual package: host-goc > > pre-compiled package: host-go-bin > > from source package: host-go > > > > So Thomas aligned on the naming used in the Rust world. I must say I do > > have a preference for the naming I have chosen for NodeJS, which IMO is > > clearer. > > I agree that the following would be preferable: > > virtual package: host-go > pre-compiled package: host-go-bin > from source package: host-go-src > > ... although I would submit that all 3 could live in a single host-go > package. > > Best, > Christian Stewart > -------------- next part -------------- An HTML attachment was scrubbed... URL: From heiko.thiery at gmail.com Tue Oct 18 08:06:53 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 10:06:53 +0200 Subject: [Buildroot] [PATCH 1/2] configs/kontron_smarc_sal28: use U-Boot 2022.10 Message-ID: <20221018080653.1586970-1-heiko.thiery@gmail.com> Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y since this are dependencies for building mkeficapsule u-boot tool. Cc: Michael Walle Signed-off-by: Heiko Thiery --- configs/kontron_smarc_sal28_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 877903a1fe..25846c8cbd 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" -- 2.30.2 From heiko.thiery at gmail.com Tue Oct 18 08:06:55 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 10:06:55 +0200 Subject: [Buildroot] [PATCH 2/2] configs/kontron_smarc_sal28: use linux kernel 5.19.16 In-Reply-To: <20221018080653.1586970-1-heiko.thiery@gmail.com> References: <20221018080653.1586970-1-heiko.thiery@gmail.com> Message-ID: <20221018080653.1586970-2-heiko.thiery@gmail.com> Cc: Michael Walle Signed-off-by: Heiko Thiery --- configs/kontron_smarc_sal28_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 25846c8cbd..e502b2b67b 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_ROOTFS_OVERLAY="board/kontron/smarc-sal28/rootfs_overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/smarc-sal28/post-build.sh" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.16" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var3-ads2 freescale/fsl-ls1028a-kontron-sl28-var4 freescale/fsl-ls1028a-kontron-kbox-a-230-ls" -- 2.30.2 From peter at korsgaard.com Tue Oct 18 08:25:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 10:25:48 +0200 Subject: [Buildroot] [PATCH] package/squid: security bump to version 5.7 Message-ID: <20221018082548.1987175-1-peter@korsgaard.com> Fixes the following security issues: - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager https://www.openwall.com/lists/oss-security/2022/09/23/1 - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication https://www.openwall.com/lists/oss-security/2022/09/23/2 Signed-off-by: Peter Korsgaard --- package/squid/squid.hash | 8 ++++---- package/squid/squid.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/squid/squid.hash b/package/squid/squid.hash index 22c6db8c70..b00d14011e 100644 --- a/package/squid/squid.hash +++ b/package/squid/squid.hash @@ -1,6 +1,6 @@ -# From http://www.squid-cache.org/Versions/v5/squid-5.6.tar.xz.asc -md5 2f2201a18a0a727ab589d951ebe4f815 squid-5.6.tar.xz -sha1 a01f47b3e9ff06245c894773de30bfd88ab14f65 squid-5.6.tar.xz +# From http://www.squid-cache.org/Versions/v5/squid-5.7.tar.xz.asc +md5 7a3764a3c5833631a779d7827901cda7 squid-5.7.tar.xz +sha1 141e8007d6b1cfee34654127a9ca025125b37b58 squid-5.7.tar.xz # Locally calculated -sha256 38d27338a347597ce0e93d0c3be6e5f66b6750417c474ca87ee0d61bb6d148db squid-5.6.tar.xz +sha256 6b0753aaba4c9c4efd333e67124caecf7ad6cc2d38581f19d2f0321f5b7ecd81 squid-5.7.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squid/squid.mk b/package/squid/squid.mk index 86a0c714c6..355af0b902 100644 --- a/package/squid/squid.mk +++ b/package/squid/squid.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUID_VERSION = 5.6 +SQUID_VERSION = 5.7 SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz SQUID_SITE = http://www.squid-cache.org/Versions/v5 SQUID_LICENSE = GPL-2.0+ -- 2.30.2 From yann.morin at orange.com Tue Oct 18 08:40:44 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 10:40:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <20221017201444.GE3666@scaer> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> <20221017201444.GE3666@scaer> Message-ID: <17222_1666082446_634E668E_17222_61_1_20221018084044.GG2064029@tl-lnx-nyma7486> Norbert, All, On 2022-10-17 22:14 +0200, Yann E. MORIN spake thusly: > On 2022-10-17 18:49 +0200, Norbert Lange spake thusly: > > Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > > But so far, we do not have that technically better solution, so we need > > > to fix things that are arctually broken. > > I tried to bring that in for ages. Probably just have cooked up a patch instead. > I'll test it in our use-case @work tomorrow. I did preliminray tsts, and it works, that's great! :-) I'll be cleaning up my series and repost something real quick I hope. Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From heiko.thiery at gmail.com Tue Oct 18 09:59:59 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 11:59:59 +0200 Subject: [Buildroot] [PATCH 1/2] configs/kontron_smarc_sal28: use U-Boot 2022.10 In-Reply-To: <20221018080653.1586970-1-heiko.thiery@gmail.com> References: <20221018080653.1586970-1-heiko.thiery@gmail.com> Message-ID: Hi, Am Di., 18. Okt. 2022 um 10:07 Uhr schrieb Heiko Thiery : > > Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y > since this are dependencies for building mkeficapsule u-boot tool. please ignore it and the one for the kernel update.. it does not fit in the image. Damn (@michael ;-/) -- Heiko > Cc: Michael Walle > Signed-off-by: Heiko Thiery > --- > configs/kontron_smarc_sal28_defconfig | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig > index 877903a1fe..25846c8cbd 100644 > --- a/configs/kontron_smarc_sal28_defconfig > +++ b/configs/kontron_smarc_sal28_defconfig > @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_VERSION=y > -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" > BR2_TARGET_UBOOT_NEEDS_DTC=y > BR2_TARGET_UBOOT_NEEDS_PYTHON3=y > BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y > +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y > # BR2_TARGET_UBOOT_FORMAT_BIN is not set > BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" > -- > 2.30.2 > From paul at crapouillou.net Tue Oct 18 11:01:57 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Tue, 18 Oct 2022 12:01:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/umtprd: add patch to fix output_dir make dependency Message-ID: <20221018110157.35331-1-paul@crapouillou.net> Object file targets need to depend on the output_dir target. Upstream commit: https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ Signed-off-by: Paul Cercueil --- .../0001-Fix-output_dir-make-dependency.patch | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..fcbca6b000 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,46 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +[paul at crapouillou.net: Backport from upstream commit d84216a] +Signed-off-by: Paul Cercueil +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.35.1 + -- 2.35.1 From feedback at dallmeier.com Tue Oct 18 11:49:45 2022 From: feedback at dallmeier.com (feedback at dallmeier.com) Date: Tue, 18 Oct 2022 13:49:45 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation In-Reply-To: <20221014193021.GD2503@scaer> References: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> <20221014193021.GD2503@scaer> Message-ID: On 2022-10-14 21:30, Yann E. MORIN wrote: > Andreas, All, > > On 2022-10-14 11:10 +0200, feedback--- via buildroot spake thusly: >> Hi all, >> >> we are not sure if this is even a bug, but BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via 'menuconfig' without setting a >> string for the bool value. > > Thanks for the suggestion. > > That was on purpose that this was not selectable, see the commit log > that introduced the option, 20dd9453f32c (package/dhcpcd: add > BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP), which referred to: > > https://patchwork.ozlabs.org/project/buildroot/patch/20210303091904.467706-1-fontaine.fabrice at gmail.com > > which basically said (paraphrasing): > > For such complex conditions, it is easier to introduce a Kconfig > symbol, rather than write complex Makefile code in the .mk file. > > Indeed, before 20dd9453f32c, there were quite a few repetitive code > blocks to handle each of them, see commit d412539dbca2 (package/dhcpcd: > disable privsep on older kernels). > > Can you explain why you'd want to explicitly disable privilege > separation in dhcpcd? Thank you for the explanation. I didn't know that you use the kconfig values also for other purposes sometimes. First we thought the kernel version from one of our systems is too old because of some strange error messages during startup of dhcpcd, but it seems that there was another problem involved which has been fixed. I have turned privilege separation back on for now. >> --- a/package/dhcpcd/Config.in >> +++ b/package/dhcpcd/Config.in >> @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD >> ?if BR2_PACKAGE_DHCPCD >> >> ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP >> -?????? bool >> +?????? bool "enable privilege separation" >> ??????? default y >> ??????? depends on BR2_USE_MMU >> ??????? # Audit headers were only added in recent kernels for some arches >> >> Best regards, >> Andreas > >> > > Please, avoid html mail; our patchwork did not even catch it: > https://patchwork.ozlabs.org/project/buildroot/list/ > > Next time, please use "git send-email", which sends patches in a format > ready to be digested to be applied easily. Sorry for the HTML mail, this one is text hopefully. > Regards, > Yann E. MORIN. > >> >> >> >> >> Hi all,
    >>
    >> we are not sure if this is even a bug, but >> BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via >> 'menuconfig' without setting a string for the bool value.
    >>
    >> --- a/package/dhcpcd/Config.in
    >> +++ b/package/dhcpcd/Config.in
    >> @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD
    >> ?if BR2_PACKAGE_DHCPCD
    >> ?
    >> ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP
    >> -?????? bool
    >> +?????? bool "enable privilege separation"
    >> ??????? default y
    >> ??????? depends on BR2_USE_MMU
    >> ??????? # Audit headers were only added in recent kernels for some >> arches
    >>
    >> Best regards,
    >> Andreas
    >>
    >>     >> >> > >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > > From ps.report at gmx.net Tue Oct 18 13:14:45 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Tue, 18 Oct 2022 15:14:45 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: <20221018151445.42d376ff@gmx.net> Hello Giulio, On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy Please mention this in the commit message (including the breaking upstream commit) and additional mention that the used commit is from the branch(?) not master..., will save some research time for later updates... Regards, Peter > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > index 9c7f2de4b6..ff8c0a3418 100644 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ b/package/rtl8188eu/rtl8188eu.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz > sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > index ebce4617ac..99f8248c05 100644 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ b/package/rtl8188eu/rtl8188eu.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa > RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > RTL8188EU_LICENSE_FILES = COPYING From giulio.benetti at benettiengineering.com Tue Oct 18 13:15:06 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:15:06 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in Message-ID: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO specifically: * Switch to use LIB80211. * Switch to use MAC80211. * Switch to use CFG80211. So let's remove the description that is not valid anymore. Suggested-by: Luca Ceresoli Signed-off-by: Giulio Benetti --- package/rtl8188eu/Config.in | 3 --- 1 file changed, 3 deletions(-) diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in index 76d9085297..8d68d104c8 100644 --- a/package/rtl8188eu/Config.in +++ b/package/rtl8188eu/Config.in @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU depends on BR2_LINUX_KERNEL help A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. Make sure your target kernel has the CONFIG_WIRELESS_EXT config option enabled. -- 2.34.1 From giulio.benetti at benettiengineering.com Tue Oct 18 13:15:41 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:15:41 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221018085943.104f227f@booty> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> <20221018085943.104f227f@booty> Message-ID: <121f1b7b-457c-0c19-f94b-2f2decca0a29@benettiengineering.com> Hi Luca, All, On 18/10/22 08:59, Luca Ceresoli via buildroot wrote: [ SNIP ] >>> There is currently no fix in the github repository, and it's probably not >>> worth fixing because, as the Config.in help text states: >>> >>> This is needed only for Linux kernels before 3.12. >>> Since 3.12, there is a (staging) driver in mainline, with a >>> similar codebase. >> >> Despite the buildroot help text the rtl8188eu code base is still maintained >> see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream >> versions tend to support different feature sets regarding IBSS and/or monitor >> mode etc. - not sure about this one but valid for some other rtlxxxx ones), > > Good to know! Why not adding this info to Config.in too? It would avoid > others trying to remove the package again. > Good idea, I've just sent a patch for this: https://patchwork.ozlabs.org/project/buildroot/patch/20221018131506.123350-1-giulio.benetti at benettiengineering.com/ Kind regards -- Giulio Benetti Benetti Engineering sas From giulio.benetti at benettiengineering.com Tue Oct 18 13:17:58 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:17:58 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221018151445.42d376ff@gmx.net> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> <20221018151445.42d376ff@gmx.net> Message-ID: Hi Peter, On 18/10/22 15:14, Peter Seiderer wrote: > Hello Giulio, > > On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti wrote: > >> Signed-off-by: Giulio Benetti >> --- >> V1->V2: >> * use specific upstream commit SHA1 since the latest is buggy > > Please mention this in the commit message (including the breaking upstream > commit) and additional mention that the used commit is from the > branch(?) not master..., will save some research time for later updates... Ok. My patch to fix the build with Linux < 6.0 has been already committed, so I send a V3 using the latest commit and I point the branch in the commit log. To be honest it wasn't easy for me too :-) Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > Regards, > Peter > >> --- >> package/rtl8188eu/rtl8188eu.hash | 2 +- >> package/rtl8188eu/rtl8188eu.mk | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash >> index 9c7f2de4b6..ff8c0a3418 100644 >> --- a/package/rtl8188eu/rtl8188eu.hash >> +++ b/package/rtl8188eu/rtl8188eu.hash >> @@ -1,3 +1,3 @@ >> # Locally computed >> -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz >> +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz >> sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING >> diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk >> index ebce4617ac..99f8248c05 100644 >> --- a/package/rtl8188eu/rtl8188eu.mk >> +++ b/package/rtl8188eu/rtl8188eu.mk >> @@ -4,7 +4,7 @@ >> # >> ################################################################################ >> >> -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 >> +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa >> RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) >> RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) >> RTL8188EU_LICENSE_FILES = COPYING > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From giulio.benetti at benettiengineering.com Tue Oct 18 13:19:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:19:34 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> <20221018151445.42d376ff@gmx.net> Message-ID: <6ae4b9c9-ab3c-b77d-1220-c62fd12dd8ee@benettiengineering.com> And I've also forgotten the Fixes: On 18/10/22 15:17, Giulio Benetti wrote: > Hi Peter, > > On 18/10/22 15:14, Peter Seiderer wrote: >> Hello Giulio, >> >> On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti >> wrote: >> >>> Signed-off-by: Giulio Benetti >>> --- >>> V1->V2: >>> * use specific upstream commit SHA1 since the latest is buggy >> >> Please mention this in the commit message (including the breaking >> upstream >> commit) and additional mention that the used commit is from the >> branch(?) not master..., will save some research time for later >> updates... > > Ok. My patch to fix the build with Linux < 6.0 has been already > committed, so I send a V3 using the latest commit and I point the branch > in the commit log. To be honest it wasn't easy for me too :-) > > Thank you! > Best regards -- Giulio Benetti Benetti Engineering sas From giulio.benetti at benettiengineering.com Tue Oct 18 13:39:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:39:36 +0200 Subject: [Buildroot] [PATCH v3] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> Note that we use latest commit from branch v5.2.2.4 instead of branch master. Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti Reviewed-by: Petr Vorel Reviewed-by: Luca Ceresoli --- V1->V2: * use specific upstream commit SHA1 since the latest is buggy V2->V3: * use latest commit since it's been fixed and improve commit log as pointed by Peter Seiderer --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..0ad7786328 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 50529c110e0a45fbe3169d0e237c4d0959300840f5e162c24256452976fb2670 rtl8188eu-c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..199362d7ae 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From peter at korsgaard.com Tue Oct 18 13:50:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 15:50:39 +0200 Subject: [Buildroot] [PATCH 2022.02.x] package/php: security bump version to 8.0.24 In-Reply-To: <20221017181523.95205-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Mon, 17 Oct 2022 20:15:23 +0200") References: <20221017181523.95205-1-bernd.kuhls@t-online.de> Message-ID: <87pmep6y1c.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Fixes > - CVE-2022-31629: http://bugs.php.net/81727 > - CVE-2022-31628: http://bugs.php.net/81726 > Signed-off-by: Bernd Kuhls Committed to 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 13:48:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 15:48:44 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/php: security bump version to 8.0.24 Message-ID: <20221018135055.9F8E786E97@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ec14fbf8ecb600274c7431d4992b50adcc1c8bee branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes - CVE-2022-31629: http://bugs.php.net/81727 - CVE-2022-31628: http://bugs.php.net/81726 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 2e9aa6880b..55a92c6c36 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 973fec765336ee01f47536a5db1c2eee98df9d34a41522b7b6c760159bf0a77b php-8.0.20.tar.xz +sha256 8e6a63ac9cdabe4c345b32a54b18f348d9e50a1decda217faf2d61278d22f08b php-8.0.24.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index d9c2edd839..facc2f5634 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.0.20 +PHP_VERSION = 8.0.24 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From james.hilliard1 at gmail.com Tue Oct 18 15:01:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 18 Oct 2022 09:01:19 -0600 Subject: [Buildroot] [PATCH 1/1] package/umtprd: fix make shuffle build Message-ID: <20221018150119.2305656-1-james.hilliard1@gmail.com> Backport a patch fixing a makefile dependency issue that breaks when using make 4.4's shuffle mode. Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d Signed-off-by: James Hilliard --- .../0001-Fix-output_dir-make-dependency.patch | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..2d4d6980f4 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,47 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +d84216a678edaca81c0899318231cdcca2100d38] +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.34.1 + -- 2.34.1 From angelo at amarulasolutions.com Tue Oct 18 15:16:24 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 18 Oct 2022 17:16:24 +0200 Subject: [Buildroot] [PATCH v4] package/cutekeyboard: new package Message-ID: <20221018151624.882453-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci Acked-by: Andrea Ricchi --- v2: * bump to verison v1.0.1 v3: * Adding me to developers file v4: * Fixing typo in Config.in package/Config.in | 1 + package/cutekeyboard/Config.in | 19 +++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 41 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..59362f0648 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,19 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for + embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard examples" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..3d3ec2f858 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 8cbaddc5fbf479d5e20fc88228e9af5928fa5e588052ee496c2f2efbe2afc510 cutekeyboard-afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..3e4c08f44e --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# qt5virtualkeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.25.1 From angelo at amarulasolutions.com Tue Oct 18 16:14:13 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 18 Oct 2022 18:14:13 +0200 Subject: [Buildroot] [PATCH] package/python-minimalmodbus: new package Message-ID: <20221018161413.1237297-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 4 files changed, 26 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..56af3d426b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 locally computed +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..e4e93b4c31 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From fontaine.fabrice at gmail.com Tue Oct 18 17:05:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 18 Oct 2022 19:05:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: fix build with gcc 4.8 Message-ID: <20221018170531.190643-1-fontaine.fabrice@gmail.com> Fix the following build failure with gcc 4.8 raised since bump to version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: In file included from alloc.c:25:0: utils.h:204:48: error: expected ';', ',' or ')' before 'dest' static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, ^ Fixes: - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e Signed-off-by: Fabrice Fontaine --- package/gesftpserver/gesftpserver.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index b47ec1c5d3..5a3ab0536c 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -16,7 +16,9 @@ GESFTPSERVER_CPE_ID_VENDOR = green_end GESFTPSERVER_CPE_ID_PRODUCT = sftpserver # forgets to link against pthread when cross compiling -GESFTPSERVER_CONF_ENV = LIBS=-lpthread +GESFTPSERVER_CONF_ENV = \ + CFLAGS="$(TARGET_CFLAGS) -std=c99" \ + LIBS=-lpthread # overwrite openssh version if enabled GESFTPSERVER_DEPENDENCIES += \ -- 2.35.1 From heiko.thiery at gmail.com Tue Oct 18 18:37:24 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 20:37:24 +0200 Subject: [Buildroot] [PATCH v2] configs/kontron_smarc_sal28: use U-Boot 2022.10 Message-ID: <20221018183724.2377-1-heiko.thiery@gmail.com> Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y since this are dependencies for building mkeficapsule u-boot tool. Change the offset of the rootfs to left enough space for the U-Boot that has increased. Cc: Michael Walle Signed-off-by: Heiko Thiery --- board/kontron/smarc-sal28/genimage.cfg | 2 +- configs/kontron_smarc_sal28_defconfig | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/board/kontron/smarc-sal28/genimage.cfg b/board/kontron/smarc-sal28/genimage.cfg index c885cd51a6..82bab26fec 100644 --- a/board/kontron/smarc-sal28/genimage.cfg +++ b/board/kontron/smarc-sal28/genimage.cfg @@ -17,7 +17,7 @@ image sdcard-emmc.img { } partition rootfs { - offset = 2M + offset = 4M image = rootfs.ext4 partition-uuid = %PARTUUID% } diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 877903a1fe..25846c8cbd 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" -- 2.20.1 From peter at korsgaard.com Tue Oct 18 19:41:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:41:53 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 01:10:01 -0600") References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <87ilkg7wce.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu102. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:42:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:42:18 +0200 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-2-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 01:10:02 -0600") References: <20221017071002.48266-1-neal.frager@amd.com> <20221017071002.48266-2-neal.frager@amd.com> Message-ID: <87bkq87wbp.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu106. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From yann.morin at orange.com Tue Oct 18 19:43:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:06 +0200 Subject: [Buildroot] [PATCH 0/6 v3] systemd: sort out the conflict between var factory and tmpfiles Message-ID: <10881_1666122188_634F01CC_10881_33_1_cover.1666122184.git.yann.morin@orange.com> Hello All! This six-patch series touches on the delicate intricacies of the systemd package and how we integrate it in Buildroot, especially with regard to read-only filesystems. The underlying issue is that systemd wants a writable /var filesystem (it will store a bunch of things at runtime in there). A lot of packages also expect a writable /var. The solution we implemented in Buildroot is to generate a factory for /var, and register that as tmpfiles, at build time, and mount a tmpfs on the then-empty /var at runtime, so that systemd-tmpfiles populates /var on boot. Having a tmpfs means /var is repopulated from a clean state at each boot, and people who want a persistent /var have to provide their own mechanism to mount their actual filesystem instead. However, for some people, this does not seem to work as expected, so we introduced a call to systemd-tmpfiles at build time, to pre-populate the rootfs from all the tmpfiles, of which our var factory, at build time, entirely leaving them the reponsibility to make /var read-write. These two mechanisms clash with each others; they do not prevent a system from booting, but they cause files to be duplicated between the factory and the pre-populated /var. To solve the issue, this series introduces new options, so the user can elect to use either, none, or both mechanisms, as they see fit. The first two patches make it easier to change the location where /var is nounted from, by making it a systemd mount unit, rather than use the legacy fstab, and move the factory to /usr/share as it is a system factory (/etc is for the administartor to provide overrides). Then we move together the two mechanisms under the auspices of a common package, to make it easier to later make them conditional. Then we introduce those two new options, that drive each mechanism. We make sure the behaviour so far is kept, for those who have setups that are functional as is. Eventually, we add a new way to provide a writable /var, which uses a pre-populated /var on which an tmpfs is overlayed with an overlayfs. This new feature still uses a tmpfs as the writable part, and like for the factory case, leaves to the user the responsiility to provide for a persitent filesystem should they need one. This series would not have been entirely possible without the input from Norbert, who provided the basis for the overlayfs-based solution. Thanks! Changes v2 -> v3: - introduce the overlayfs-based proposal from Norbert - some rewording - some typo fixes (yah, Yann being Yann being me...) Changes v1 -> v2: - split Yann at work initial patch into the first two patch - move the systemd-tmpfile handling to the skeleton - introduce options to enable/disable factory or systemd-tmpfiles Regards, Yann E. MORIN. The following changes since commit 5b5d3befef9c92a7485c1c68989d95749882ee2a package/python-django: security bump to version 4.0.8 (2022-10-17 22:37:25 +0200) are available as patches in this mail series, for you to apply patches up to b3efa290e26b85b54ab27728bf190316cf2ab1ee system: add option to use an overlayfs on /var on a r/o root w/ systemd (2022-10-18 21:37:43 +0200) ---------------------------------------------------------------- Yann E. MORIN (6): package/skeleton-systemd: move /var factory tmpfiles out of /etc package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs package/skeleton-systemd: host the tmpfiles preparation script system: add options for /var factory and tmpfiles pre-seed system: introduce a choice for /var management system: add option to use an overlayfs on /var on a r/o root w/ systemd package/skeleton-init-systemd/factory/var.mount | 18 ++++++ .../fakeroot_tmpfiles.sh | 0 .../overlayfs/rootfs-bindmount-var.service | 21 +++++++ package/skeleton-init-systemd/overlayfs/var.mount | 15 +++++ .../skeleton-init-systemd/skeleton-init-systemd.mk | 36 ++++++++++-- package/systemd/systemd.mk | 6 -- system/Config.in | 67 +++++++++++++++++++++- 7 files changed, 150 insertions(+), 13 deletions(-) create mode 100644 package/skeleton-init-systemd/factory/var.mount rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:04 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:04 +0200 Subject: [Buildroot] [PATCH 1/6 v3] package/skeleton-systemd: move /var factory tmpfiles out of /etc In-Reply-To: References: Message-ID: <18712_1666122192_634F01D0_18712_304_1_aadcab6f9e8f71b5581c8a15b2773a431bb29ca0.1666122184.git.yann.morin@orange.com> When the rootfs is not remounted read-write (thus assuming a read-only rootfs like squashfs), we create a tmpfiles.d factory for /var. However, we register those in /etc/tmpfiles.d/, but /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we move our var factory to /usr/lib/tmpfiles.d/, which is also the location where systemd itself places its own tmpfiles, and where we already put all our other tmpfiles (see audit, avahi, cryptsetup, dhcp, lighttpd, nfs-utils, quagga, samba4, swupdate) and our handling of systemd's catalog files too. We also rename the file to a better name, so that it is obvious it is generated by us (systemd already installs a var.conf of its own, so we want to avoid name clashing). Last little detail: there is no need or reason to create .../tmpfiles.d/ at install time; it is only needed in the rootfs-pre-cmd hook, so we only create it just before we need it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only moves out of /etc and into /usr/lib - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- package/skeleton-init-systemd/skeleton-init-systemd.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 795a171809..7b66732ef4 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -29,7 +29,6 @@ else # a real (but empty) directory, and the "factory files" will be copied # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW - mkdir -p $(TARGET_DIR)/etc/systemd/tmpfiles.d echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef @@ -38,6 +37,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var + mkdir -p $(TARGET_DIR)/usr/lib/tmpfiles.d for i in $(TARGET_DIR)/usr/share/factory/var/* \ $(TARGET_DIR)/usr/share/factory/var/lib/* \ $(TARGET_DIR)/usr/share/factory/var/lib/systemd/*; do \ @@ -51,7 +51,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR printf "C! %s - - - -\n" "$${j}" \ || exit 1; \ fi; \ - done >$(TARGET_DIR)/etc/tmpfiles.d/var-factory.conf + done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:05 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:05 +0200 Subject: [Buildroot] [PATCH 2/6 v3] package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs In-Reply-To: References: Message-ID: <27491_1666122194_634F01D2_27491_495_1_cf89a104edc507c063e6f4716cc859891b489d27.1666122184.git.yann.morin@orange.com> To mount our /var tmpfs when the rootfs is mounted read-only (really, not remounted reqd-write), we use an entry in fstab. However, /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). It also prevents easily ordeting other systemd units until after /var is mounted 5not impossible, but less easy). So, we register /var as a systemd mount unit, so that we can also have the /var factory populated and functional even when /etc is empty. The var.mount unit is heavily modelled after systemd's own tmp.mount one, so we carry the same license for that file (in case that may apply). We add an explicit reverse dependency to systemd-tmpfiles-setup.service, to ensure /var is mounted before we try to populate it. This has two side effects: - as hinted previously, it simplifies writing other systemd units to order them after /var is mounted - replace it with their own, which mounts an actual filesystem [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only handles converting /var mounting into a systemd unit - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- .../skeleton-init-systemd.mk | 3 ++- package/skeleton-init-systemd/var.mount | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 package/skeleton-init-systemd/var.mount diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 7b66732ef4..970951d553 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -30,7 +30,6 @@ else # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab - echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR @@ -52,6 +51,8 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/var.mount new file mode 100644 index 0000000000..6b165dff6d --- /dev/null +++ b/package/skeleton-init-systemd/var.mount @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: LGPL-2.1-or-later +# Modelled after systemd's tmp.mount + +[Unit] +Description=Buildroot /var tmpfs +DefaultDependencies=no +Conflicts=umount.target +Before=basic.target local-fs.target umount.target systemd-tmpfiles-setup.service +After=swap.target + +[Mount] +What=tmpfs +Where=/var +Type=tmpfs +Options=mode=1777,strictatime,nosuid,nodev,size=50%%,nr_inodes=1m + +[Install] +WantedBy=basic.target -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:06 +0200 Subject: [Buildroot] [PATCH 3/6 v3] package/skeleton-systemd: host the tmpfiles preparation script In-Reply-To: References: Message-ID: <14736_1666122197_634F01D5_14736_488_1_88b7ddd5c7fe78927e68e2f29ea9c9e61e0a782f.1666122184.git.yann.morin@orange.com> From: "Yann E. MORIN" Commit 0d9b84b7a83f (package/systemd: invoke systemd-tmpfilesd on final image) forcefully introduced a call to systemd-tmpfiles as a per-rootfs hook, on the premise that would help with read-only rootfs. However, that did not account for the then-pre-existing handling of /var as a factory when the user opted not to remount / read-write (by not setting BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW). This means that, for users who want to use a factory for /var, the generated filesystem contains the factory files twice: once as stored in the factory, and once as populated by systemd-tmpefilesd. In the hope to reconcile the two solutions, we move the handling of calling systemd-tmpfilesd to the skeleton-init-systemd package, where we already handle the /var factory. Having the two in the same package will make it easier, in the future, to provide the user with a choice whether to use one of the other. Note that it is very important to keep the order of the hooks as they are. Indeed, skeleton-init-systemd sorts before systemd, so its hooks were registered before systemd's hooks; now that we move the CREATE_TMPFILES hook, we must ensure it is called after the PRE_ROOTFS_VAR one, so that the behaviour of acting on the var factory remains. As a final note: we chose the move this way, rather than move the var factory into the systemd package, because it is more related to the system integration on the Buildroot side, rather than the integration of the systemd package in Buildroot. Similarly, the other four rootfs hooks, SYSTEMD_LOCALE_PURGE_CATALOGS, SYSTEMD_UPDATE_CATALOGS, SYSTEMD_RM_CATALOG_UPDATE_SERVICE, and specially SYSTEMD_PRESET_ALL, should also be moved out of the systemd package, because they too are more related to the Buildroot system, rather than to the systemd package itself; but the frontier is very porous is either way, for such a package as special as systemd. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh | 0 package/skeleton-init-systemd/skeleton-init-systemd.mk | 6 ++++++ package/systemd/systemd.mk | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) diff --git a/package/systemd/fakeroot_tmpfiles.sh b/package/skeleton-init-systemd/fakeroot_tmpfiles.sh similarity index 100% rename from package/systemd/fakeroot_tmpfiles.sh rename to package/skeleton-init-systemd/fakeroot_tmpfiles.sh diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 970951d553..89a28d1780 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -58,6 +58,12 @@ SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_V endif +define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ + $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home mkdir -p $(TARGET_DIR)/srv diff --git a/package/systemd/systemd.mk b/package/systemd/systemd.mk index 1d7452de19..e4a8114221 100644 --- a/package/systemd/systemd.mk +++ b/package/systemd/systemd.mk @@ -739,12 +739,6 @@ define SYSTEMD_RM_CATALOG_UPDATE_SERVICE endef SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_RM_CATALOG_UPDATE_SERVICE -define SYSTEMD_CREATE_TMPFILES_HOOK - HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ - $(SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) -endef -SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK - define SYSTEMD_PRESET_ALL $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all endef -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:07 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:07 +0200 Subject: [Buildroot] [PATCH 4/6 v3] system: add options for /var factory and tmpfiles pre-seed In-Reply-To: References: Message-ID: <30918_1666122199_634F01D7_30918_364_1_3fe68afdbb79505161ac76e31e6054dc44dd340d.1666122184.git.yann.morin@orange.com> From: "Yann E. MORIN" Currently, when one does not enable remounting the rootfs read-write, i.e. keep it read-only, for example because the filesystem is actualyl read-only by design, like squashfs, then two things happen: - we create a factory from the content of /var at build time, register tmpfiles entries for it, and mount a tmpfs on /var at runtime, so that systemd-tmpfiles does populate /var from the factory; this is only done when the rootfs is not remounted r/w; - we trigger systemd-tmpfiles at build time, which uses the tmpfiles db, of which our /var entries, to pre-populate the filesystem; this is always done, whether the rootfs is remounted r/w or not. Note that Buildroot mounts a tmpfs on /var, and leaves to the integrator to care for providing an actual filesystem, as there are too many variants and is very specific to each use-case. These two mechanisms are conflicting, semantically, bit also technically: the files from the factory will be duplicated, but that may help in some situations when the actual /var filesystem is not mountable. In some cases, it might be preferable to have none, either, or both mechanisms enabled; it highly depends on the ultimate integration scheme chosen for a device. For example, some people will be very happy with a /var that is actually on a tmpfs and that it gets reseeded form scratch at every boot, while others may want to ensure that their system continue to work even when they can't mount something that makes /var writable. YMMV, as they used to say back in the day... So, we introduce two new options, in the system sub-menu, each to drive each mechanism. We default those options to y, to keep the previous behaviour by default, except the var factory is only available when the rootfs is not remounted r/w, as it were so far. We still hint in the help text that there might be some conflict between the two mechanisms, bt since it has been that way for some time, it does not look too broken for most people. Since that introduces more options related to systemd being chosen as an init system, we gather those two options and the existing one inside a if-endif block, rather than adding more 'depends on' on each options. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../skeleton-init-systemd.mk | 7 +++- system/Config.in | 42 ++++++++++++++++++- 2 files changed, 46 insertions(+), 3 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 89a28d1780..69991265a5 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -32,6 +32,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab endef +ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var @@ -55,14 +56,16 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +endif # BR2_INIT_SYSTEMD_VAR_FACTORY +endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW -endif - +ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK +endif # BR2_INIT_SYSTEMD_POPULATE_TMPFILES define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home diff --git a/system/Config.in b/system/Config.in index 888c24ce81..806a747315 100644 --- a/system/Config.in +++ b/system/Config.in @@ -154,10 +154,48 @@ source "$BR2_BASE_DIR/.br2-external.in.init" endchoice +if BR2_INIT_SYSTEMD + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs on /var" + default y # legacy + depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Build a factory of the content of /var as installed by + packages, mount a tmpfs on /var at runtime, so that + systemd-tmpfiles can populate it from the factory. + + This may help on a read-only rootfs. + + It probably does not play very well with triggering a call + to systemd-tmpfiles at build time (below). + + Note: Buildroot mounts a tmpfs on /var to at least make the + system bootable out of the box; mounting a filesystem from + actual storage is left to the integration, as it is too + specific and may need preparatory work like partitionning a + device and/or formatting a filesystem first, so that falls + out of the scope of Buildroot. + + To use persistent storage, provide a systemd dropin for the + var.mount unit, that overrides the What and Type, and possibly + the Options and After, fields. + +config BR2_INIT_SYSTEMD_POPULATE_TMPFILES + bool "trigger systemd-tmpfiles during build" + default y # legacy + help + Act on the systemd-tmpfiles.d database at build time, when + assembling the root filesystems. + + This may help on a read-only filesystem. + + It probably does not play very well with the /var factory + (above). + config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET string "The default unit systemd starts at bootup" default "multi-user.target" - depends on BR2_INIT_SYSTEMD help Specify the name of the unit configuration file to be started at bootup by systemd. Should end in ".target". @@ -165,6 +203,8 @@ config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET https://www.freedesktop.org/software/systemd/man/systemd.special.html#default.target +endif # BR2_INIT_SYSTEMD + choice prompt "/dev management" if !BR2_INIT_SYSTEMD default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:08 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:08 +0200 Subject: [Buildroot] [PATCH 5/6 v3] system: introduce a choice for /var management In-Reply-To: References: Message-ID: <4895_1666122201_634F01D9_4895_296_1_acafcb63e0879326a88681d7f3d27afeb31ccd51.1666122184.git.yann.morin@orange.com> Currently, we have a single solution to handle the /var content on a read-only root filesystem, and users can opt out of using it. We're going to introduce another solution (based on an overlayfs), which is incompatible with using the factory, so we'll have a choice of three mutually exclusive options. Introduce that choice now with just the existing /var factory, and a new option to opt out of it. Signed-off-by: Yann E. MORIN --- system/Config.in | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/system/Config.in b/system/Config.in index 806a747315..074fda509c 100644 --- a/system/Config.in +++ b/system/Config.in @@ -156,10 +156,16 @@ endchoice if BR2_INIT_SYSTEMD -config BR2_INIT_SYSTEMD_VAR_FACTORY - bool "build a factory to populate a tmpfs on /var" - default y # legacy +choice + bool "/var management" + default BR2_INIT_SYSTEMD_VAR_FACTORY # legacy depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Select how Buildroot provides a read-write /var when the + rootfs is not remounted read-write. + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs" help Build a factory of the content of /var as installed by packages, mount a tmpfs on /var at runtime, so that @@ -181,6 +187,15 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY var.mount unit, that overrides the What and Type, and possibly the Options and After, fields. +config BR2_INIT_SYSTEMD_VAR_CUSTOM + bool "something else" + help + Choose this if you have custom dispositions (like a + post-build, fakeroot script, systemd units, or initramfs) + that prepare /var to be writable on a read-only rootfs. + +endchoice + config BR2_INIT_SYSTEMD_POPULATE_TMPFILES bool "trigger systemd-tmpfiles during build" default y # legacy -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:09 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:09 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: References: Message-ID: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> While the /var factory seems to be working in most cases, there have been suggestions that it may be slightly and subtely borken in some (rare? edge?) cases, especially about symlinks. An other solution is to pre-populate /var at build time, by way of calling systemd-tmpfiles, and mounting an overlayfs on-top of it at runtime. This is slightly accrobatic, though, and requires a few hoops: - first, we create a tmpfs - there, we create three directories: - the first to bind-mount /var as it is, i.e. read-only - the second as the read-write upper for the overlayfs - the third as the "working area" for the overlays This is done with two systemd units: - rootfs-bindmount-var.service: prepares up to bind-mounting /var into the tmpfs - var.mount: a mount unit which actually mounts the overlayfs. Users who want to provide an actual storage to keep /var across reboots, will have to provide their own mount units and make it RequiredBy and BoundBy our var.mount unit. Systemd units courtesy Norbert, with slight tweaks and cleanups. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen --- .../{ => factory}/var.mount | 0 .../overlayfs/rootfs-bindmount-var.service | 21 ++++++++++++++++ .../skeleton-init-systemd/overlayfs/var.mount | 15 ++++++++++++ .../skeleton-init-systemd.mk | 20 +++++++++++++--- system/Config.in | 24 +++++++++++++------ 5 files changed, 70 insertions(+), 10 deletions(-) rename package/skeleton-init-systemd/{ => factory}/var.mount (100%) create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/factory/var.mount similarity index 100% rename from package/skeleton-init-systemd/var.mount rename to package/skeleton-init-systemd/factory/var.mount diff --git a/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service new file mode 100644 index 0000000000..e412a56c49 --- /dev/null +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service @@ -0,0 +1,21 @@ +[Unit] +Description=Bind-mount variable storage (/var) +Documentation=man:file-hierarchy(7) +ConditionPathIsSymbolicLink=!/var +# ConditionPathIsReadWrite=!/var +DefaultDependencies=no +Conflicts=umount.target +Before=local-fs.target umount.target +After=local-fs-pre.target + +[Service] +Type=oneshot +RemainAfterExit=yes +ExecStartPre=-/bin/mkdir /run/varoverlay +ExecStartPre=/bin/mount --make-private -n -t tmpfs tmpfs_root_ovl /run/varoverlay +ExecStartPre=/bin/mkdir /run/varoverlay/lower /run/varoverlay/upper /run/varoverlay/work +ExecStart=/bin/mount --make-private -n --bind /var /run/varoverlay/lower + +ExecStop=/bin/umount -n /run/varoverlay/lower +ExecStopPost=/bin/umount -n /run/varoverlay +ExecStopPost=/bin/rmdir /run/varoverlay diff --git a/package/skeleton-init-systemd/overlayfs/var.mount b/package/skeleton-init-systemd/overlayfs/var.mount new file mode 100644 index 0000000000..fab223c27b --- /dev/null +++ b/package/skeleton-init-systemd/overlayfs/var.mount @@ -0,0 +1,15 @@ +[Unit] +Description=variable storage (/var) +Documentation=man:file-hierarchy(7) +ConditionPathIsSymbolicLink=!/var +After=rootfs-bindmount-var.service +BindsTo=rootfs-bindmount-var.service + +[Mount] +What=overlay_var +Where=/var +Type=overlay +Options=lowerdir=/run/varoverlay/lower,upperdir=/run/varoverlay/upper,workdir=/run/varoverlay/work,redirect_dir=on,index=on,xino=on + +[Install] +WantedBy=local-fs.target diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 69991265a5..07a4180db0 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -33,7 +33,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW endef ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) -define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var @@ -52,11 +52,25 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf - $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/factory/var.mount \ $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef -SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY endif # BR2_INIT_SYSTEMD_VAR_FACTORY + +ifeq ($(BR2_INIT_SYSTEMD_VAR_OVERLAYFS),y) +define SKELETON_INIT_SYSTEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_OVERLAY_FS) +endef +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/rootfs-bindmount-var.service \ + $(TARGET_DIR)/usr/lib/systemd/system/rootfs-bindmount-var.service +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS +endif # BR2_INIT_SYSTEMD_VAR_OVERLAYFS + endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) diff --git a/system/Config.in b/system/Config.in index 074fda509c..0c064b8211 100644 --- a/system/Config.in +++ b/system/Config.in @@ -164,6 +164,14 @@ choice Select how Buildroot provides a read-write /var when the rootfs is not remounted read-write. + Note: Buildroot uses a tmpfs, either as a mount point or as + the upper of an overlayfs, so as to at least make the system + bootable out of the box; mounting a filesystem from actual + storage is left to the integration, as it is too specific and + may need preparatory work like partitionning a device and/or + formatting a filesystem first, which falls out of the scope + of Buildroot. + config BR2_INIT_SYSTEMD_VAR_FACTORY bool "build a factory to populate a tmpfs" help @@ -176,17 +184,19 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY It probably does not play very well with triggering a call to systemd-tmpfiles at build time (below). - Note: Buildroot mounts a tmpfs on /var to at least make the - system bootable out of the box; mounting a filesystem from - actual storage is left to the integration, as it is too - specific and may need preparatory work like partitionning a - device and/or formatting a filesystem first, so that falls - out of the scope of Buildroot. - To use persistent storage, provide a systemd dropin for the var.mount unit, that overrides the What and Type, and possibly the Options and After, fields. +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS + bool "mount an overlayfs backed by a tmpfs" + help + Mount an overlayfs on /var, with the upper as a tmpfs. + + To use a persistent storage, provide your own systemd unit(s) + that eventually mount that persistent storage on + /run/varoverlay/upper/ + config BR2_INIT_SYSTEMD_VAR_CUSTOM bool "something else" help -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From peter at korsgaard.com Tue Oct 18 19:43:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:43:39 +0200 Subject: [Buildroot] [PATCH v1 1/1] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset In-Reply-To: <20221017094429.4752-1-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 03:44:29 -0600") References: <20221017094429.4752-1-neal.frager@amd.com> Message-ID: <877d0w7w9g.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the kv260. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Please note that this is a temporary solution as the kv260 > pmufw is not yet available on the Xilinx github. This is expected > in the coming months. The nealfrager github uses the same > licensing terms as the Xilinx github regarding the distribution of > zynqmp pmufw binary files. > https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE > https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:40:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:40:21 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset Message-ID: <20221018194406.2782B86E91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=894753ee47596200104d4ba57cf29eed45aef2c8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu106. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- configs/zynqmp_zcu106_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig index 3d98dffe01..896fea0ab2 100644 --- a/configs/zynqmp_zcu106_defconfig +++ b/configs/zynqmp_zcu106_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu106/zcu106_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:43:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:43:05 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset Message-ID: <20221018194406.3238586EBB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b564a8ccf8016d4c3c285702b37192abe0852e4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the kv260. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Please note that this is a temporary solution as the kv260 pmufw is not yet available on the Xilinx github. This is expected in the coming months. The nealfrager github uses the same licensing terms as the Xilinx github regarding the distribution of zynqmp pmufw binary files. https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE Signed-off-by: Neal Frager Signed-off-by: Peter Korsgaard --- configs/zynqmp_kria_kv260_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig index 4700e651dc..25bab4cbb4 100644 --- a/configs/zynqmp_kria_kv260_defconfig +++ b/configs/zynqmp_kria_kv260_defconfig @@ -30,7 +30,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/nealfrager/buildroot-firmware/raw/v2022.1/kv260/kv260_pmufw.bin" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:39:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:39:06 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset Message-ID: <20221018194406.1CD0786EB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27481c91131d19d5a4a673449fec4c312af6bae1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu102. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- configs/zynqmp_zcu102_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig index 217fa0814b..66c24c4b64 100644 --- a/configs/zynqmp_zcu102_defconfig +++ b/configs/zynqmp_zcu102_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:49:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:49:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: fix build with gcc 4.8 In-Reply-To: <20221018170531.190643-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Tue, 18 Oct 2022 19:05:31 +0200") References: <20221018170531.190643-1-fontaine.fabrice@gmail.com> Message-ID: <8735bk7vzq.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix the following build failure with gcc 4.8 raised since bump to > version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and > https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: > In file included from alloc.c:25:0: > utils.h:204:48: error: expected ';', ',' or ')' before 'dest' > static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, > ^ > Fixes: > - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:47:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:47:03 +0200 Subject: [Buildroot] [git commit] package/gesftpserver: fix build with gcc 4.8 Message-ID: <20221018194944.B10A486EBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=85a9a3f0e644556b0cd8f2126c6efa5d32695704 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure with gcc 4.8 raised since bump to version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: In file included from alloc.c:25:0: utils.h:204:48: error: expected ';', ',' or ')' before 'dest' static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, ^ Fixes: - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gesftpserver/gesftpserver.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index b47ec1c5d3..5a3ab0536c 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -16,7 +16,9 @@ GESFTPSERVER_CPE_ID_VENDOR = green_end GESFTPSERVER_CPE_ID_PRODUCT = sftpserver # forgets to link against pthread when cross compiling -GESFTPSERVER_CONF_ENV = LIBS=-lpthread +GESFTPSERVER_CONF_ENV = \ + CFLAGS="$(TARGET_CFLAGS) -std=c99" \ + LIBS=-lpthread # overwrite openssh version if enabled GESFTPSERVER_DEPENDENCIES += \ From fontaine.fabrice at gmail.com Tue Oct 18 21:37:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 18 Oct 2022 23:37:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/oracle-mysql: add CPE variables Message-ID: <20221018213756.268341-1-fontaine.fabrice@gmail.com> cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql Signed-off-by: Fabrice Fontaine --- package/oracle-mysql/oracle-mysql.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/oracle-mysql/oracle-mysql.mk b/package/oracle-mysql/oracle-mysql.mk index f1f16abbb4..1086e4125f 100644 --- a/package/oracle-mysql/oracle-mysql.mk +++ b/package/oracle-mysql/oracle-mysql.mk @@ -13,6 +13,8 @@ ORACLE_MYSQL_DEPENDENCIES = ncurses ORACLE_MYSQL_AUTORECONF = YES ORACLE_MYSQL_LICENSE = GPL-2.0 ORACLE_MYSQL_LICENSE_FILES = README COPYING +ORACLE_MYSQL_CPE_ID_VENDOR = oracle +ORACLE_MYSQL_CPE_ID_PRODUCT = mysql ORACLE_MYSQL_SELINUX_MODULES = mysql ORACLE_MYSQL_PROVIDES = mysql ORACLE_MYSQL_CONFIG_SCRIPTS = mysql_config -- 2.35.1 From giulio.benetti at benettiengineering.com Tue Oct 18 23:46:17 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 01:46:17 +0200 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target Message-ID: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> At the moment all APIs folders are copied to target increasing the size of rootfs of ~190MB. Allow to select which API folders we want to copy to target to shrink rootfs down. Signed-off-by: Giulio Benetti --- package/mono/Config.in | 16 ++++++++++++++++ package/mono/mono.mk | 12 ++++++++++++ 2 files changed, 28 insertions(+) diff --git a/package/mono/Config.in b/package/mono/Config.in index 76178bcf9b..8690ee68ef 100644 --- a/package/mono/Config.in +++ b/package/mono/Config.in @@ -23,6 +23,22 @@ config BR2_PACKAGE_MONO http://download.mono-project.com/sources/mono/ +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL + bool "Specify folders to install to target" + help + Allow to specify which Mono folder to install to target + +if BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL + +config BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL + string "Mono folders to install to target" + help + Paths to Mono folders to install to target /usr/lib/mono/. + Only these folders will be copied to the target and not all + the built ones. You can provide a list of folders separated by + by spaces. + +endif comment "mono needs a toolchain w/ C++, NPTL, dynamic library" depends on BR2_PACKAGE_MONO_ARCH_SUPPORTS depends on !BR2_INSTALL_LIBSTDCPP || \ diff --git a/package/mono/mono.mk b/package/mono/mono.mk index 219effc5d3..8036d23205 100644 --- a/package/mono/mono.mk +++ b/package/mono/mono.mk @@ -30,10 +30,22 @@ MONO_CONF_OPTS = $(MONO_COMMON_CONF_OPTS) --disable-mcs-build # The libraries have been built by the host-mono build. Since they are # architecture-independent, we simply copy them to the target. +ifeq ($(BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL),y) +# Copy only selected folders +define MONO_INSTALL_LIBS + mkdir -p $(TARGET_DIR)/usr/lib/mono + (for dir in $(call qstrip,$(BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL)); do \ + rsync -av --exclude=*.so --exclude=*.mdb \ + $(HOST_DIR)/lib/mono/$${dir} $(TARGET_DIR)/usr/lib/mono; \ + done) +endef +else +# Copy all folders define MONO_INSTALL_LIBS rsync -av --exclude=*.so --exclude=*.mdb \ $(HOST_DIR)/lib/mono $(TARGET_DIR)/usr/lib/ endef +endif MONO_POST_INSTALL_TARGET_HOOKS += MONO_INSTALL_LIBS -- 2.34.1 From neal.frager at amd.com Wed Oct 19 05:18:21 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:21 -0600 Subject: [Buildroot] [PATCH v1 1/3] configs/zynq_zc706_defconfig: bump to Xilinx 2022.2 Message-ID: <20221019051823.26706-1-neal.frager@amd.com> This patch bumps the zc706 to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_zc706_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 82c47be7a5..e9b9e0264c 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/zc706/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From neal.frager at amd.com Wed Oct 19 05:18:22 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:22 -0600 Subject: [Buildroot] [PATCH v1 2/3] configs/zynq_microzed_defconfig: bump to Xilinx 2022.2 In-Reply-To: <20221019051823.26706-1-neal.frager@amd.com> References: <20221019051823.26706-1-neal.frager@amd.com> Message-ID: <20221019051823.26706-2-neal.frager@amd.com> This patch bumps the microzed to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_microzed_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 10a4f4095f..8115a34ab2 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/microzed/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From neal.frager at amd.com Wed Oct 19 05:18:23 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:23 -0600 Subject: [Buildroot] [PATCH v1 3/3] configs/zynq_zed_defconfig: bump to Xilinx 2022.2 In-Reply-To: <20221019051823.26706-1-neal.frager@amd.com> References: <20221019051823.26706-1-neal.frager@amd.com> Message-ID: <20221019051823.26706-3-neal.frager@amd.com> This patch bumps the zed to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_zed_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 34e1b67184..26109b7b7d 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/zed/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From thomas.petazzoni at bootlin.com Wed Oct 19 05:41:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 19 Oct 2022 05:41:10 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-18 Message-ID: <20221019054117.D129F41BB4@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-18 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 7 | 0 | 0 | 7 | 2022.08.x | 14 | 19 | 1 | 34 | master | 151 | 341 | 12 | 504 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 18 glibc-2.36-44-g2628500f5dff... | 17 host-sentry-cli-1.59.0 | 16 host-f2fs-tools-1.15.0 | 15 linux-6.0.1 | 14 brltty | 12 sysvinit-2.99 | 11 autofs-5.1.8 | 10 crun-1.5 | 10 host-gcc-final-11.3.0 | 10 host-pahole-73383b3a39afe86... | 10 systemd-250.4 | 10 xz-5.2.7 | 10 igd2-for-linux-2.1 | 9 btrfs-progs-5.16.2 | 8 libglib2-2.72.3 | 8 casync-4ad9bcb94bc83ff36cfc... | 6 efivar-38 | 6 dash-0.5.11.5 | 5 host-binutils-2.38 | 5 libarchive-3.6.1 | 5 assimp-5.2.5 | 4 gerbera-1.10.0 | 4 host-go-1.19.1 | 4 linuxptp-3.1.1 | 4 unknown | 4 batman-adv-2021.4 | 3 elfutils-0.186 | 3 host-binutils-2.37 | 3 host-binutils-2.39 | 3 libgpg-error-1.45 | 3 linux-5.10.145-cip17 | 3 ocf-linux-20171122 | 3 perl-5.34.1 | 3 xenomai-3.0.10 | 3 cairo-1.16.0 | 2 gobject-introspection-1.72.0 | 2 host-gcc-final-10.4.0 | 2 host-gcc-initial-12.2.0 | 2 libcap-ng-0.8.3 | 2 libmdbx-0.11.12 | 2 linux-pam-1.5.2 | 2 lxc-4.0.12 | 2 mesa3d-22.1.6 | 2 usbguard-1.1.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 acpid-2.0.33 | 1 alsa-lib-1.2.7.2 | 1 apparmor-3.0.4 | 1 attr-2.5.1 | 1 augeas-1.12.0 | 1 brltty-6.5 | 1 cppcms-2.0.0-beta2 | 1 cryptodev-linux-1.12 | 1 e2fsprogs-1.46.5 | 1 exim-4.96 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gensio-2.5.5 | 1 gesftpserver-2 | 1 gsl-2.6 | 1 gst1-plugins-bad-1.20.4 | 1 gummiboot-2bcd919c681c952eb... | 1 host-delve-1.8.0 | 1 host-gcc-initial-10.4.0 | 1 host-gcc-initial-11.3.0 | 1 host-rust-1.64.0 | 1 jack2-1.9.20 | 1 kmod-29 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libcurl-7.84.0 | 1 libdcadec-0.2.0 | 1 libdill-32d0e8b733416208e04... | 1 libgcrypt-1.10.1 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 memcached-1.6.16 | 1 mongodb-4.2.18 | 1 mtd-2.1.3 | 1 musl-1.2.3 | 1 netsurf-3.10 | 1 ntp-4.2.8p15 | 1 ocrad-0.28 | 1 openvmtools-11.3.5-18557794 | 1 package/openssh/openssh.mk:... | 1 pango-1.50.10 | 1 perl-net-ssleay-1.85 | 1 php-8.1.11 | 1 procps-ng-3.3.17 | 1 pv-1.6.20 | 1 python3-3.10.7 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 reaver-1.6.6 | 1 scrypt-1.3.1 | 1 sysklogd-2.4.4 | 1 tealdeer-1.5.0 | 1 toolchain-external-codesour... | 1 traceroute-2.1.0 | 1 uboot-tools-2021.07 | 1 valgrind-3.19.0 | 1 wolfssl-5.5.1 | 1 x264-baee400fa9ced6f5481a72... | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/34d18fd284627bdb593fb7d833be0666f0520800 | arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/14315c1045e8779cff10a004eb72acf3d5d14e0d | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/700177e585c52ab85ce1f2d3fb28b015f91a9d7c | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/0d3657f11b6f8997d9feccfc9d6c28a9c445a0bc | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/418bf0b1e012208f6838767d4b2becd51b86e8a9 | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/f57f70122535f725c66a835abb6925665e444797 | arceb | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/a0569f11c31642625edf56856ca4a473183c63bb | sh4a | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/90acbc0ac1704b7f51dbdbd7061201a85537c8ba | ORPH nios2 | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/9f77387212f680bbd826cf7985f41c3d16bc56c4 | ORPH arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/785376f863ecd19e622cac5e2f5dbc60cb38a807 | ORPH mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/04f402f29b94a6e30b17956950fb4794151ab5cd | ORPH mips64 | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/b4e2146a1b5adfb87094565779c1a9692becd129 | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/b870bc8c6093aeff98579b3a62139c131da2ab94 | ORPH sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/28336bf79f5191fc78f67a59311024838df3c853 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/188fbddffc6802c445e2a4eae9e83b0b5a40db06 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/be60a4d35b35307e67ef8a0c0421b3fe196e3e97 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6c7d3f65e798787c858851fd3d4037ef707aa92b | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3550c4a4cb3a86ee823c8b95b3e7152d82f66ae7 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a630be428abcef270b4a59a9bb6994ca29d6b670 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2b8639ad906b5c6078efb3fa6d908cc9775d1ef2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ea885421a5a03acb9a1f62b545b8cb654c659e27 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/623b2c63466c8485e9f0d2e0a8e77ef50f0692b3 | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cfd4229c3ea6397c395d86961e47ccce1f602f59 | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/93fc048c8f2ba1c78dcfcef89d2c0940fc0dd19f | mips64el | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4ebe1c17d8284237a26370b0593be0dbbfeae14c | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4fc407e56c99b23225cf4fe5f9c21913c51f3072 | mips | brltty | TIM | http://autobuild.buildroot.net/results/2302771d580a2ae1965993b000504dac2a33db13 | arm | brltty | TIM | http://autobuild.buildroot.net/results/32829a4ee398444a414b72f11daeaf585e638e62 | arc | brltty | TIM | http://autobuild.buildroot.net/results/44df7848aacf43e9da7337f73ccfcf5ae0b79e67 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/f042cc115659339bda2da446def7d1e8c6ca7257 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/d3190ac8d39ea0f1a7ef3cfbc5a237430ee194c8 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/6116b05c4f27399fb491abe5c06ef77a414cce57 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/2ca9de7e1d36457d6a05357120ba356684e1245b | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/b02b45dd7a6c7a47a2246fcf0b257b618cb30424 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/5a69b8562fca8227e77dc0d4ca4fc8ee9537f658 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/a3c3f42b72b540920873cf233b5adfdd5f965059 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/0b0a1cc22051abf1e577e8710bd6d4bdb2decee6 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/c9df3f49688b2034e8f63cbfbed25f45b302d06e | powerpc64le | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/45eb39e88798ca297aaa41dd9cb09afa6e7a201a | mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e9662b9d3f7918c29201bd6006095e0003769e93 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6e3f58188333677918ff23fa26950203bcbcf17b | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/097fb3c82be2817a6f128986cf86004d2ab1bcd6 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6697e5b21801d197ddcfbcb5cdb42cb62ac57608 | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2af4e5cd527d7deb0d03a59973571f0247db8bdf | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/42cb775a9f921091b11dbac3bd8d1e525da700ac | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ff9576129b0acc3b1a6a13ad8d599c83998a1912 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e8c0441d28478c613f3cd2a856098fa96f813945 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/bb0827eda406cf973a6c2c17669813285407b667 | aarch64 | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/57bf6a6f92f28d54e0c71d0353526e7533a58d4f | arc | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5521e13b3dee3f16d5ab64a658616ee69f002635 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/15dde583da654f38ab24bdc0f2364ec546365574 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/8671225998ba47f90ea3e01a10830c61bdbf5d9e | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4c0a4a4cfb576448463795fd8f60739ceceefe11 | arc | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/ce8b6b89781196c89eaf5c9014157240558c6e88 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/e69c9b374203f375226ab719bc9f3e5642f1bd29 | or1k | cppcms-2.0.0-beta2 | NOK | http://autobuild.buildroot.net/results/00bc902f9e93dcd94d7f4b0573ec41da132835ba | ORPH arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/72d35382b9af437f63f9b22a42b31aa20b0016a4 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4b1ac8aec00c044d1ecba1795edca94a97519197 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/65ad72518ff469a9b0a939f1d68f7aa43def0ccf | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c17d2a21a05517036be3197be8e6574ebc323b5d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ee79feb6ec4564b91880c91eaa77c194ed001c2e | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e228bdc8c275403bcf1c404f6c27808615cec27e | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/81f9e76fadc44596d37f9b8e109989336d98c3ba | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a789b3ffa7f90fa24695015317562695acad5d29 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/88adfc26d948bdea3997125e31d7bd65eec5e3c3 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ba610af39eec8067aa17abf7ea983099d68c4a54 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/bb73a973a03348644cd847aef9d0137e8c065baf | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/66cca6852e924dfe4138997271b5663ef2457051 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/938a1e425d91ab69e1b1ff69fb15a2776959e07e | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/40b905955e7548f43dc61e09972a44cdc5d28084 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/85e072c4f105a25d987e874286bbf0139a163004 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/eefbc09173d8363a4fea289d12e4f4e89cd2a47a | ORPH or1k | e2fsprogs-1.46.5 | NOK | http://autobuild.buildroot.net/results/69168ddfa9edd3ef78c74ced61940e6b79e9ec78 | ORPH x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/856d2ef018090c564b53b79e14e3b0a74492a6b2 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/177797c29829b63b0ea33591850c4f2cf3e47fa9 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/b826a0c7815b4589780659251f83a507da491c06 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/ce31ea71f04fef3f263e72e7b1cac86367b2b248 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/900eabc70a88ef0514917b9c91c9e06436e22250 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/8a4113ec94301dcdf6654b9a9ea7c21229c48df1 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8f0356f82a27c78e7eefd9775648e04d245e6518 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/534825288c912dc8aeaac3310c86819a5e3a67da | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/55c1aeb20ef60910db0818abdff122c7966d1c76 | ORPH arm | exim-4.96 | NOK | http://autobuild.buildroot.net/results/31af7179d01f68888e75b92fae359fc7d8cc5afe | arm | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/8df59c82591412248da2596ce51b1b852c24d588 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/bc8770486dcd560a56abfaf2f19770eed1dc2823 | ORPH microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0330d42bab234ff613a85df7e3747844d10708c2 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/ed053af5e995c2ce2ca34a172d939abc63caece0 | mips64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/3776adfeef0a721d7e7dda954fdd5369b68ffab5 | mips64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/2af6801cd9610d8f9a47852348970ef3b8fbe7ca | x86_64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/28e95f5c537f561337bf7f22fa45fab239ccb776 | xtensa | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/217c042c9e08bbf9ce714a6f19895b5552742632 | or1k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/5f43787e45216b4950e3e3e197ffdc05a47f6a75 | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/8ac7be703435af21e9c0e4f9410d79d7ca3a1820 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/d16a735c77fa23e5dc59bc2b2b0ed669a78caae1 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/0501474851f011d18dcfd92ab9895ba247418572 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9eb3ad8c04b77b6d5e48b03649d84b1df990639b | riscv32 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/aa941983a7ffc240b219d20622c6a1442a227171 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/57c5db58acfffaef3a3b9bcc2b780bcedb1988e2 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/e454a30a607322c706a8218bbb1a544972f2c6cf | arm | gesftpserver-2 | NOK | http://autobuild.buildroot.net/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e | ORPH x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee3337566150f1d3d90f011bf0a5e0db9eb75637 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77d47a0c2ba7e91508fb9945328f68b4d61b8374 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02cb1cd2683f2bbdcd37cac98bae2493b3211d11 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/08ced72efcaccefc68b7c34bdd52f43e490ee12a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd06577e10e1d0d2a9017335f1f97437252b4ab1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39de331cfc3338feda5234b706b359cbc06c917b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de1f7c94466c06e56ca902bccc42e310377e2ad9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a144107556d784fc9f6cde29c1631db5cec15fb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af6373b9d2f3230ef5042241a533903e293bb3e6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ba9ad9a31c42a179ad7551e17aab5c9db2c95b0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/519d616b18b2c111efb0d6c33544dcd667f6076b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38954f19fed10838b9f0f5c638d94f2f6cd1b6ba | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c598c81a366135f0fa6bff97e3c601769861de51 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/200cf19cfbb125bd46c2433a72e6c335a073daea | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cafa792a55f794713ae011f2b5c009b82de6dc8 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f2e464ccb8b329bef5449ec0d4ca1fee3e2fcb7 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbf6a71d9d5c0ba164b78300edf4f9fe608e03ee | or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/671a7f791f81bec7338453e15b7af04d80a0648c | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4a524f21898ce0ed4f54f55454581535353cd718 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/1427fc76926c65a92d135f246eb3116f7801be96 | ORPH riscv32 | gst1-plugins-bad-1.20.4 | NOK | http://autobuild.buildroot.net/results/9db614deede389c49f66c742e60c5a04b90d304e | ORPH i686 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/ce0dadc77c874ad4de64c7b71fc9a668c3c226b1 | powerpc64le | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/084ace7677d7ab3abe17f3fe0819449d42ee8a79 | or1k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/9ffdef1beed12e9baa383918bb5eb220cbc6e2aa | mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7f720f946137277ccbb18833c31b8f33126c0c1d | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3e865de7f17a4833915b8231cc7fea6fd26f8218 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5207eb10cca89ba5752f5d4b846bf93a7d67fee6 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b4dfa1b5802940fb410900a2200509528e20e57 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5dd829f9e387943254773d5fb75c2ce8c629717f | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/05d599d76829a25ee7aea0793fa1cca2740b2a9c | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/d054b1bc46eb11fb92d9578846e2db8dfadf5adc | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/e66505dba84125f164dbac59c93846857216e983 | riscv32 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/daaca7d2ba559a5b4a51e9f273ff4cb45670ca78 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/b42ed204b10cdfa5ecbafe661426d22e6adaacba | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/17437dc7c33d4a52579f8841f9e713aff62573b9 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/73553950eae577e084a9ccccbf21afce480a9c2d | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a4932e0cc67a685af1a37030666f8ecbe7785566 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9fd668afd97b8394160f9199e5cb63b05bdf757 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d8804e1dd9d3f873b8a8efbd9784c75c45d91de7 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a91534ac3e06f02cb88d61395464df2510267db5 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/757e1026faf6a5d96e9f495c75b4f8f19775d2ba | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c902b83facef09442d9cb058a744753c2b5801b5 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/304c1e5196e175ecc09924e6893c17cc1d96ec8a | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e3c4932a7f84a593274df3fed2e09b06657215b6 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d408b4171c0f9a056aa2d38c97563e7e25b44d00 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68bb66d124dab3ebc8c1649c699357821d414c86 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd90ed14eae2500b9bc769e883f5c15734072111 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0e55f4b07bf2ebc0eeeddb68bb9b0a345b9b1660 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bec76a3d8ac9441f5c40f420eb8ddfd08ad6031b | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/5bcefdb6bcd96a602337255c4b0dfc5dd14e4ad3 | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/1fbd39a9f6437c7f00da0e5b934cdd9a8990701d | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/7bf503151fb21a2e6e7d0996e946fd3744cd64b7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3046afe05bdfdc8d110f63d107803850a8a4a8bb | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/866318b01ddc0c3cc9201465bfff5c7955b3970a | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cab5d67ddf92938e1cd14145b1222f346381aab8 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eba6ec4b46ec1e185b914076d9aae5a20cfbfc93 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f673d94fe9e29cf0bcf720f8cc62385c56a78e7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d9d79e05693318cf1a20543a9c4dbc4dcc09b8b | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d700648dc17e3f47463303eb330dbf93a7f4a70a | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eaa9bdb72dfaa43453f98993dedb8f2abad44cfc | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0900ff5784f411113372fe5304dbc00d70ee4446 | powerpc64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/451ef03151fafc330bf1afd62ca004f9f72ef19f | powerpc | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b357f5365c5c7e11ff0d2f47a03d01135852576 | microblazeel | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9422578eb1d86d0371dbff26f3ca2d42d6333bbf | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/8bd14cc5499fcabd81d11fb0ed8833759b78bc52 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/10359024f706e2d3ec0de20bdeca504cc8c71698 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e07ab8806658601f51d25544e285222174e23e9 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2656fa69c5a2a3e2995121a1d429ee655e0cb4ee | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5c3508aa93391370b02dc17a1e0aef941aff2c43 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/33bb157d1b43406c23cda0fed32376013b7ab64c | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/568e749d5ad7086751ac4d1275ebd2bb9a851480 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1dc88850c6bd6593a79b5694f874111a30d1586a | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/87a7260ac018e193fa81c2bc61d5224eadd0439b | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ee4e5e8d3f2e1cbccccb9e8b09ba7407de6dfe82 | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0bf0728816cb16e25ab156b7e29ec535acd1a3c8 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/333ea21884198910c3933dd90520190daec8af9b | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b265101ef8758b92e6821821617373726258627a | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/124739328dd6fdc48b73c1e40415ddc29b3be752 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c8f6a09d463363691b5db5ae611cc65ff2e2f36 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/883dac69ab52b8d49936695fd047ad600db3f5c1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/946db68ca1d8c01e5fb2f15eec6dc485983daafb | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/367d79436b9563d92d96bd8703d5615c3c329cd1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed2522fc550ae808512d10592d857bee91b0c14e | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bc0f71895fa40b690f4a4ff55b8bd5a98c664ad5 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f1e09fa6b67f4b4ca0ae24da5f2966ce03151562 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0b3b908c7fe4e86e2f9e710f71bf3067102f61a4 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0ff07390d80e492470c7b75bf4c640c2f7a8c436 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e03becdd7b7b778188d0234852a6ad6522d413d7 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/782c7b234c56672c1d87d546362bf6d4565d1187 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d3481e67abb0bf29284369ef9db5104895e63525 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e2a71dd615190358ae043f06800f0e9c0940b8b8 | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/043c43c06d29c33cf8c589877df180a0831197ea | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ead3f0afdfdd2abf3c4c2ecedc00c85d497afffb | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/510df43fb8657b5d67a43f34b04fae6dd44ebc1b | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/41dc09051a370205bc51a5525e1d3d413aaf6335 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/97bb174f7a594a516aa55b5d56a8092ed9085b66 | sh4a | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6e61163a5d98103b60827be328a3cb374d315d5b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5e8d215b4b2faed55f72aa796a7439bed1a60153 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aecab3caa6633e38a746375be453e48b88c5d1b8 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b922a96cd8a2bf16916230fce78c8273ba8396d5 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/be9a73ceb229fc46ae15dfb7a0dd1a900b0bc9b2 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a6ad4adab849b26b94a2a835dffed162706e592f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d1f771613f55c14bdcfe44a9c8445b6882d1a65c | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8ba49861848d548640374985103e4da77a8a5e51 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/144531410b4a8e08f25d5fee18f4223fe4339a20 | or1k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/cd98dba9b023b5a77de3f5a331cefaeae73116ab | mips64 | kmod-29 | NOK | http://autobuild.buildroot.net/results/d56205797a77af668574c143394f470e100f8b5a | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/0aec0f4a8c755506b8a196701018b23b52361299 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7d5ff16630923a261ffecbaba23c149b1651816e | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7095a304b6f489ea526ca7c1fbc16742ec36d70b | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8e05a591b21d723437ea565e684e2d6949216681 | riscv64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/584f1ced58ea77896713abbb56d9426a5a031690 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d1d1368db8472d01423e92a0b083e043c5b72b27 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/80d0bb5ba9313f3892c98582478849d32724908a | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/c1bc63decbf82b4df4108410b959e215052b6178 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/3a2a613fcdc8e47c77f524e7b0034052aabfdd8a | arm | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/ddb6da55c417ffa3892b6b0f4dc0eefb796f964a | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/7c4b1c42ea71141a5e4a39d05899da372793eb34 | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/56a77d1bdda169d2b57f3d3a1dfa34f6a80dc776 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4e979fc7f04a6b883acb6c36d9b4f1819543aeec | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e07fa45d86a0be05c4000a3aa3efca142786b382 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e07e704c8439a9e47423de0c3919adb6ac7b2b46 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e315dff0e99bdced3c2438efded6735d17754e90 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/58c24e82f79129081cf6ce1a4616ff37116029d0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4f8d9bce83c83268352f06002fb37223ef593b97 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8391bf2242c2941208b94588ac72c03c79763436 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/098a30553d9c7cb34aafe04e05f284cbb1cbe577 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ddd23fd9846a40ac3838c497f04f8bd3b6261144 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c32b65655415a353c4b5e9abcf19cb16e7875546 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/485d6e6b83c938cbb078dad06450d431ff373c7d | ORPH microblaze | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/d85d1cc22198f1c070fddf8ccd0afabc92ad51be | mips64el | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/1d8f5c13af8308a2b03e63037bbbc3a4e4aa9d4d | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6a267022b08ac756edab2f5ea44cdf69293471ff | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f27b2acad774a07bbb43521fb48065bbd8c377af | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0442abf8cac36d0c6d541a30fd52a1d9813e8f96 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/637cc53f5b49f5aa8bebdaa67e6e70db24298e82 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d0cab4303cd198686e4ff1b4642018f0f0fda435 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ae6ebe942b57d70e044bd969e0095927827c3538 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5d15bd85f0ed426ba344aa96b9c6599408118cc1 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c15ce5d526a88e55f7afd380eeac975c3504625c | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c41fd7d77cd72c3644c9c5d17e20320f72e24be3 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/61c69ca25cea151f48c2a89111ea8f5ea06710e1 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d61ef100e56d98bece62aca0e3ac29dbc08eb164 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/936245aa3f382dada6a3b86552bafb53f88c5687 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1b53d80ab3a44658b59029de04e1f9be84601983 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2de081ee64c5ab9ebb79d4a58beeda0bee9deb27 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5f5ce7dca30d171b69028b30f396ddbd81e45950 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ffcc34eb2d8b48b683e67a105fcf817477747719 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/85f254cb6c2d2b33842dafdad9291ee0bef3c43d | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6df9d84d31c8f865cd62b6f4da340331193fbf4a | i586 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/79410509ef985f72ce2213a179f42bd3ffed5ca0 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/127d8847607eead74938e87691193408e57274d3 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/31f29406ef0810faf0f56c528591934c92ce80de | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b569f70f9cc4fcd7e8c0788e3103e2404884dcb9 | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/89862aeb0864027c95f5cbf95c2d92e6da6a3a10 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7f850823d88a435495017906dcaaa233fde5221c | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4297563694f9b4360e61d09ff0b7d87a35015db1 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4fad9041b1a0a7d5ebeacb33113dad5146b477c8 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ffd39687c2888c8735f8146a6eb2381633737f6f | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7581a3c3e15507b1ea2db9ea46537df2c28fef1e | ORPH sh4eb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/20555660a089fe5300cfda2eaa034a87966e86bf | ORPH armeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/0882f8af1f82e571074fba9c6bac6e17c4cdf42f | ORPH riscv64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d216f65caabefe9e736b133b999e71fe3b07a291 | ORPH aarch64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b88deebd1196dddc15dadbb501945ab778784a4b | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b78c743a9458a7d2d36780b8d110c14740a80087 | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/be0958c97c94379260eb4ed1355bcac68a9abfdf | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/657dff29f456cd65b731d9815f6237981f2fa9fa | ORPH powerpc64 | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/0a20ef40a34efa00978fac27eb4123f657c062be | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/081700482007df4e538ef56a57e14d4c27d09abb | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/098c9ff57e1a968caa78e80cb24941cbc901c92d | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/09aa73a0f13337dc80788ac5362b4d8aa056ba10 | ORPH or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3d18f0a979638cb0ccd8379273dc1f24bf0beaba | or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/b1188e7741dd0cce71189d4129330cdd8cd9ca94 | arm | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f1938d4dce340ac75e6d2f582048d11c42c362db | mipsel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/86d767036402e0a97a695c403f0200ceebde4092 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/37084a9e56687919d67b5b329f5e3d400862b7db | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/f0bc5051676711ecea609b217f3c8398806ed8c3 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/580be0d45e5bc241ee9c9d27c48acab416ef4ad4 | ORPH or1k | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/edf3700b281a450e82a259a79613749f6a559cdd | powerpc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/cc5bdca284e118b28d89b7d3812b230397f27434 | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/cab2919965d9b6e00dc1abd3aea5b310b398e961 | s390x | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/1b347e11d21343a948f2ccd7f2c59318c3b8e011 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a0f6a43ff86c5276d78d4285dfb293f5315ba51c | arceb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/3c413978d830f3b7d3e5fadd08ae86a8ff821500 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c0688481f48356cf50197fc0d566fc3535ed165d | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f308c3f0b9e7f9e69f3b29d699b0f37379e4f10c | ORPH sh4 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/28b7b4850fe7c6fa8480a246553e7ee62d0b724f | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/497023cf0881c73b4bef5552808273fd0013e6c9 | ORPH riscv64 | ocrad-0.28 | NOK | http://autobuild.buildroot.net/results/efd3f3f843dee8c22c7360dbbdbce54756d87e3d | x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/dd20080b3a4343d3443df825456bfa5dcb4a3c96 | or1k | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/9f1ac31bb5563046757d282179e2af6877916e63 | x86_64 | pango-1.50.10 | NOK | http://autobuild.buildroot.net/results/d488649ddd0b3cf0ea1fad34f05117994c26e9e0 | ORPH sh4 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/d0c4b04c5b4c3215d11d9c90faf8b4830eee710f | aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7280e4c40eebae171325316b1a0c12d5734e81c4 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7d5dba211c6a23c04260bf346d0b1d2ddde00653 | or1k | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/12764dca40f7c8d4c8fbda98b6c7b68806bd9e03 | microblazeel | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/a3c20e9ae226a8e0c9ca4bb85f3bc4d9487f5cef | s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/022492f792a77428a28d8b79346bbc95c64ba9c7 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/e986c4701df0f387037bb5b6594b6df0cdd7f7b6 | ORPH arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/46da889f314ba007a77798276a7c59be46fdebe6 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/e8683aa24fd7d2addeff1afd530dc3d30994f8f7 | sh4eb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/2888b4699cfb555c7618c41b0b4ace56c1196e11 | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/d5dc63afcbaba25e175a29f36e4b046edd79dcaf | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/de7f03abfde0602249d6f2d012c2b202d2a14658 | xtensa | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/477fdd82ef1f1d900aac6fba41471338a99dd30b | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3c071dab091d0996232c07169bd11e454a7a414f | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/46d3f73cd451e10c935790eeea17eaa0fe52d3a4 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a6d5faa0bb86007ecfd442ba36fbdc32b10f4e22 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/655abaee1501ea98c41dedc12acfb734c0f3b82b | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7d4a1bf54903d158fac5671d56b34d337beb144c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1285ca1528f16dece64ee04495bdc7f8848a4323 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/065b213dc4074614890c0eb59b95dea9ae75177f | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cf4a285bfcdd4d00a17faab8b8fd908552faf286 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16b6b753871ccd47a883d8700cf6a85a06b01c01 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/048cba6cb795fa0d31d3f29caefdbdc8fb835a08 | sh4aeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/de61fdb89083173fdaae82b603a287713434400d | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a02b4545cb0865a98403adef86a219a3c8ed62cb | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44027f46165c3224d550527b999e8ef1674236bf | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/99d79e36eb04df73d33eb62df901d2ee2acfa117 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1d81cede31ccb30f1df14ddf8799b8a9278c363e | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/048b26cd5403fc189b62ec20a014ded65eb795d6 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/971f12e4f770a3c5195a1b5a03238f4cf2a57e9c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/55dfc37fb703fcbc559d294f6bd88ae6fe157b2b | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/322c00d563da18a60b5711a8f170642d79c28b2c | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1ed6322f444aa5b903c69e5ef02895d7560bd5f4 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f41469b610a9e3d396aac402750a6dd830eb1212 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/9eb128b57b5a9f658cfaca2d3c3774d6aa38b5f3 | arm | toolchain-external-codesour... | NOK | http://autobuild.buildroot.net/results/2cddaa30895583d963be931b4e7c3f6e06faab5e | ORPH arm | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/f274dd2db445a04fc098b51ac327d1d2b61eefab | aarch64_be | uboot-tools-2021.07 | NOK | http://autobuild.buildroot.net/results/96206a6910fb267b22b0da8b8b0e5c185885c3bf | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/b5b698701f00de42aea9f15b1ce5f00eebe0cd51 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/9599892eb328bb989fa37487e9ab96a50141c487 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/0cd180cf4546fc6ade4bc1dadd0622ca06ca0709 | m68k | unknown | NOK | http://autobuild.buildroot.net/results/3134f0a93b22781d0b02151053ad24f4c8fdd0bb | sh4eb | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/28cdd80137f495d2243ed171e307f86025e2b5f4 | sparc64 | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/411bf698a838e847aad40901433c224464093894 | powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/0d7e0b77b264bf61f8fad55e406152fb93a45b01 | ORPH mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/cc2bb23abc306f140728a325e6766ee2a99eafd3 | i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/e3f7275e458db1e8725ca2356fd0d48782d4b7dd | sparc64 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/fe2be0125d0ea4b6d50ee3637102f741225975c5 | i586 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/98a82742bd341e727e776f558e66ff628fef6265 | powerpc | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/85dfe2c54f9e99502306e8c19301ae93e64886a8 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/760a6ec8d28da2dcc8dfbc553cfb8b3d4cf0265b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4ef269fe078b3943b325c185873a010363f6f781 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/695cd46547965b0ae0a90c9a5b28aa537dcc66a1 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c3ef90f8fb91fd75b6d96ca41a32267f721c0fb3 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c56d5cc9ab845beb0fbc92d7b805f0920b6e54b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f2351aa970d67df19bf7e3e6e8455901819d9afa | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/65ee32dc9e124bb5cc9c816ea5b2398344691c76 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7067657c3c20e3116cbfdb029d33bce1e79f34fe | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2e47cc62d9bc1d826a74490a80924775387b3f14 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f7851622c5280fd9e219b827abd63bda756e748c | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/1641d915bbfce043eb82e2c50d8b34b975c32f94 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 2 igd2-for-linux-2.1 | 2 linux-5.17.15 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 erlang-22.3.4.22 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 openssh-legal-info | 1 package/openssh/openssh.mk:... | 1 sudo-1.9.11p2 | 1 unknown | 1 wpewebkit | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/75666e33f18a966451adb9ae88e2e84a1a961d84 | microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/bff98d772d24dcbd0ed6203bc764c47c1e6be3e3 | powerpc | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/d4ea60a504890776fdadb7d95ad8965f90a82242 | m68k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a411c934ed7494469c64f10faf33611d267f7da3 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8fa2baf3c0ed11b1b2a76bdc9ed1261d324b7a7a | mips | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/e4bdbed052d89c2aa80869b861b6f7f553f6e089 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/3b7571dd73a220e941744f7dbc8dc08b88dac591 | sh4 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/941273859f8062353c0b8b64f09ba28354f556c7 | mipsel | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/afd71a8219e90a86deb922da64759f9c9bdb14fa | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/075ccac45aded28fd805d31626addb12d7f14d3e | ORPH armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0fcb3e53553c84f544361502b20463339a3dc1e3 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/558dd625cf56a14758244b1939df577649addc23 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/d38d52501da858716fe98089d5965059e08ccfb3 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/5dbf9b7fd20b15ca984b24a0b64b3a1b69a2f97a | ORPH i686 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/c848d3130b49a03621a69b9c834a994913cc5c74 | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/cc0f81fb7b7d7c97b864f1931b3ea1529a308861 | ORPH mipsel | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/00d94124de3d1e91ee44de3b86c44263f1e7d3ba | sparc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/602d67cf4fae4473a1ca1040d2bfef051618420a | ORPH powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/c84de89b6b90fcf64700ba6031f4a2f329b19f63 | i586 | wpewebkit | TIM | http://autobuild.buildroot.net/results/90223b33d3bf7a6fefd5a04674afdcb1e818045e | -- http://autobuild.buildroot.net From luca.ceresoli at bootlin.com Wed Oct 19 07:15:12 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Wed, 19 Oct 2022 09:15:12 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> References: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> Message-ID: <20221019091512.77a48aa8@booty> Hi Giulio, On Tue, 18 Oct 2022 15:15:06 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. A lot of this text would be useful in the help text below. The help text is visible in any moment in later releases, the commit log needs to be searched. > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti > --- > package/rtl8188eu/Config.in | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > index 76d9085297..8d68d104c8 100644 > --- a/package/rtl8188eu/Config.in > +++ b/package/rtl8188eu/Config.in > @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU > depends on BR2_LINUX_KERNEL > help > A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. For the above reasons, I'd add here: This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO I'd not add the todo list, as it will (hopefully) change in the future in the kernel and we don't want to keep updating our own copy. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From peter at korsgaard.com Wed Oct 19 08:02:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:02:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 In-Reply-To: <20221014220748.14254-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:07:48 +0200") References: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Message-ID: <87wn8w5jho.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-39282 and CVE-2022-39283 > https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:02:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:02:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 In-Reply-To: <20221014222051.48942-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:20:51 +0200") References: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjk5jhi.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service fixes: > Evgeny Vereshchagin discovered several ways in which an authenticated > local attacker could cause a crash (denial of service) in > dbus-daemon --system or a custom DBusServer. In uncommon configurations > these could potentially be carried out by an authenticated remote > attacker. > ? An invalid array of fixed-length elements where the length of the > array is not a multiple of the length of the element would cause an > assertion failure in debug builds or an out-of-bounds read in > production builds. This was a regression in version 1.3.0. > (dbus#413, CVE-2022-42011; Simon McVittie) > ? A syntactically invalid type signature with incorrectly nested > parentheses and curly brackets would cause an assertion failure in > debug builds. Similar messages could potentially result in a crash or > incorrect message processing in a production build, although we are > not aware of a practical example. (dbus#418, CVE-2022-42010; > Simon McVittie) > ? A message in non-native endianness with out-of-band Unix file > descriptors would cause a use-after-free and possible memory > corruption in production builds, or an assertion failure in debug > builds. This was a regression in version 1.3.0. (dbus#417, > CVE-2022-42012; Simon McVittie) > https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:03:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:03:00 +0200 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> (Damien Le Moal via buildroot's message of "Thu, 13 Oct 2022 16:56:46 +0900") References: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Message-ID: <87o7u85jgr.fsf@dell.be.48ers.dk> >>>>> "Damien" == Damien Le Moal via buildroot writes: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:01:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:01:01 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/dbus: security bump to version 1.12.24 Message-ID: <20221019080332.0C21186EDF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b1a75fac5ee41c4cded27e71b2e05d197df871dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 29586aed965844ffb35b4d859e02f6973a67f33c) Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From peter at korsgaard.com Wed Oct 19 07:58:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:58:32 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/freerdp: security bump to version 2.8.1 Message-ID: <20221019080332.01E4E86EDE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=062ab53211eb8ff43d7ae4b6621625fb6834b689 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 1e37cfd2dcc867e71519439e3cd9c630866b6140) Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 08:01:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:01:40 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221019080332.15C6986EE1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b44e2cf19a1f8f19e228019f320921fd06834f01 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal Signed-off-by: Peter Korsgaard (cherry picked from commit 959e9f7fdef4d8b602740312649016245209ce73) Signed-off-by: Peter Korsgaard --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index e1c9dc417e..456b40dfe4 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index 6b7f8d9c68..66e72bdc50 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index a127872cd8..a914f5f483 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index baaa2bc7bb..b91588b336 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y From robimarko at gmail.com Wed Oct 19 08:03:42 2022 From: robimarko at gmail.com (Robert Marko) Date: Wed, 19 Oct 2022 10:03:42 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: <20221002150443.159058-1-robimarko@gmail.com> References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Sun, 2 Oct 2022 at 17:04, Robert Marko wrote: > > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- > Changes in v2: > * Correct license > * Add host-pkgconf to DEPENDENCIES > * Add minimal required kernel config options Anything I can do to help get this reviewed? Regards, Robert > --- > package/Config.in | 1 + > package/mdio-tools/Config.in | 9 +++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 33 insertions(+) > create mode 100644 package/mdio-tools/Config.in > create mode 100644 package/mdio-tools/mdio-tools.hash > create mode 100644 package/mdio-tools/mdio-tools.mk > > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..ed41e8bdd4 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -536,6 +536,7 @@ endmenu > source "package/mbpfan/Config.in" > source "package/mdadm/Config.in" > source "package/mdevd/Config.in" > + source "package/mdio-tools/Config.in" > source "package/memtest86/Config.in" > source "package/memtester/Config.in" > source "package/memtool/Config.in" > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..feb1e825ac > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,9 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > + select BR2_PACKAGE_LIBMNL > + help > + Low-level debug tools for MDIO devices > diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash > new file mode 100644 > index 0000000000..0111165f27 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > new file mode 100644 > index 0000000000..308a23824b > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,20 @@ > +################################################################################ > +# > +# mdio-tools > +# > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0 > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl > + > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) > +endef > + > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > From peter at korsgaard.com Wed Oct 19 07:59:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:59:20 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/freerdp: bump to version 2.8.0 Message-ID: <20221019080510.635CF86EEF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9dbeb7d0d9a70d30677ff49eb0b80f0cf19f7cec branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Drop fourth patch (already in version) https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit a223802adb2c6d0aca45de78ce246421a270044e) Signed-off-by: Peter Korsgaard --- ...Fix-building-with-LibreSSL-2.7.0-or-newer.patch | 126 --------------------- package/freerdp/freerdp.hash | 4 +- package/freerdp/freerdp.mk | 2 +- 3 files changed, 3 insertions(+), 129 deletions(-) diff --git a/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch b/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch deleted file mode 100644 index 3edf1ff3b3..0000000000 --- a/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 55a5a0a14ecef81c8ece1fea4a5a6004aebfeaff Mon Sep 17 00:00:00 2001 -From: Adrian Perez de Castro -Date: Mon, 27 Jun 2022 11:45:44 +0200 -Subject: [PATCH] Fix building with LibreSSL 2.7.0 or newer - -With LibreSSL 2.7.0 (or newer versions) some more structs have made -opaque, which requires a few changes: - -- BIO_meth_new() and related functions are now defined by LibreSSL, the - versions from opensslcompat.{h,c} does not need to be used anymore. -- HMAC_CTX is now opaque, HMAC_CTX_new(), EVP_MD_CTX_new, and related - functions should be used instead in winpr's hash.c. - -Signed-off-by: Adrian Perez de Castro -[Upstream status: https://github.com/FreeRDP/FreeRDP/commit/436f212be3950917e4bb209aa5064e423f0dd882] ---- - libfreerdp/crypto/opensslcompat.c | 3 ++- - libfreerdp/crypto/opensslcompat.h | 3 ++- - winpr/libwinpr/crypto/hash.c | 21 ++++++++++++++------- - 3 files changed, 18 insertions(+), 9 deletions(-) - -diff --git a/libfreerdp/crypto/opensslcompat.c b/libfreerdp/crypto/opensslcompat.c -index 701902dc2..314d6b51f 100644 ---- a/libfreerdp/crypto/opensslcompat.c -+++ b/libfreerdp/crypto/opensslcompat.c -@@ -19,7 +19,8 @@ - - #include "opensslcompat.h" - --#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) -+#if OPENSSL_VERSION_NUMBER < 0x10100000L || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - BIO_METHOD* BIO_meth_new(int type, const char* name) - { -diff --git a/libfreerdp/crypto/opensslcompat.h b/libfreerdp/crypto/opensslcompat.h -index 169e8e4c2..3ad5b6bd4 100644 ---- a/libfreerdp/crypto/opensslcompat.h -+++ b/libfreerdp/crypto/opensslcompat.h -@@ -30,7 +30,8 @@ - - #include - --#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) -+#if OPENSSL_VERSION_NUMBER < 0x10100000L || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - #include - #include -diff --git a/winpr/libwinpr/crypto/hash.c b/winpr/libwinpr/crypto/hash.c -index 8265b2e90..5e94039e7 100644 ---- a/winpr/libwinpr/crypto/hash.c -+++ b/winpr/libwinpr/crypto/hash.c -@@ -151,7 +151,8 @@ WINPR_HMAC_CTX* winpr_HMAC_New(void) - WINPR_HMAC_CTX* ctx = NULL; - #if defined(WITH_OPENSSL) - HMAC_CTX* hmac = NULL; --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - if (!(hmac = (HMAC_CTX*)calloc(1, sizeof(HMAC_CTX)))) - return NULL; -@@ -185,7 +186,8 @@ BOOL winpr_HMAC_Init(WINPR_HMAC_CTX* ctx, WINPR_MD_TYPE md, const BYTE* key, siz - if (!evp || !hmac) - return FALSE; - --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Init_ex(hmac, key, keylen, evp, NULL); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -221,7 +223,8 @@ BOOL winpr_HMAC_Update(WINPR_HMAC_CTX* ctx, const BYTE* input, size_t ilen) - { - #if defined(WITH_OPENSSL) - HMAC_CTX* hmac = (HMAC_CTX*)ctx; --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Update(hmac, input, ilen); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -253,7 +256,8 @@ BOOL winpr_HMAC_Final(WINPR_HMAC_CTX* ctx, BYTE* output, size_t olen) - - #if defined(WITH_OPENSSL) - hmac = (HMAC_CTX*)ctx; --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Final(hmac, output, NULL); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -279,7 +283,8 @@ void winpr_HMAC_Free(WINPR_HMAC_CTX* ctx) - - if (hmac) - { --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_CTX_cleanup(hmac); - free(hmac); - #else -@@ -332,7 +337,8 @@ WINPR_DIGEST_CTX* winpr_Digest_New(void) - WINPR_DIGEST_CTX* ctx = NULL; - #if defined(WITH_OPENSSL) - EVP_MD_CTX* mdctx; --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - mdctx = EVP_MD_CTX_create(); - #else - mdctx = EVP_MD_CTX_new(); -@@ -464,7 +470,8 @@ void winpr_Digest_Free(WINPR_DIGEST_CTX* ctx) - - if (mdctx) - { --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - EVP_MD_CTX_destroy(mdctx); - #else - EVP_MD_CTX_free(mdctx); --- -2.36.1 - diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index 2b7aa25999..a600a96172 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.7.0.tar.gz.sha256 -sha256 89000728b6e66ac37db018d6dc5f0981b530fd550ab748877ff42892dd0c166b freerdp-2.7.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 +sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index f4636724d3..c7e01fa541 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.7.0 +FREERDP_VERSION = 2.8.0 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 07:59:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:59:27 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/freerdp: security bump to version 2.8.1 Message-ID: <20221019080510.6E46686EF1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3f796a6864a265ed6c90245576c5b2a419022d10 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 1e37cfd2dcc867e71519439e3cd9c630866b6140) Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 08:00:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:00:35 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/dbus: security bump to version 1.12.24 Message-ID: <20221019080510.7CD0086EF2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c4521ae2f11ef8283f160357ce9bd4dbe8a9292 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 29586aed965844ffb35b4d859e02f6973a67f33c) Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index de447d8680..9b008394b9 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -4,7 +4,7 @@ # ################################################################################ -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From stefan at agner.ch Wed Oct 19 08:44:43 2022 From: stefan at agner.ch (Stefan Agner) Date: Wed, 19 Oct 2022 10:44:43 +0200 Subject: [Buildroot] [PATCH] package/openvmtools: fix local privilege escalation vulnerability Message-ID: Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner --- ...uthorization-on-incoming-guestOps-re.patch | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..cae2e82f08 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,36 @@ +From 4f5cfc23dd3357bafc8b699dd5c558f000a534c3 Mon Sep 17 00:00:00 2001 +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. +--- + open-vm-tools/vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/open-vm-tools/vgauth/serviceImpl/proto.c b/open-vm-tools/vgauth/serviceImpl/proto.c +index dc1dfd7..9e04991 100644 +--- a/open-vm-tools/vgauth/serviceImpl/proto.c ++++ b/open-vm-tools/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.6.2 + -- 2.38.0 From stefan at agner.ch Wed Oct 19 08:56:16 2022 From: stefan at agner.ch (Stefan Agner) Date: Wed, 19 Oct 2022 10:56:16 +0200 Subject: [Buildroot] [PATCH v2] package/openvmtools: fix local privilege escalation vulnerability Message-ID: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner --- v2: Actually make the patch apply ...uthorization-on-incoming-guestOps-re.patch | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..b2c8995c53 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,37 @@ +From bb9f9ffbb151397545f921cee5b6a4933c6eea80 Mon Sep 17 00:00:00 2001 +Message-Id: +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. +--- + vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/vgauth/serviceImpl/proto.c b/vgauth/serviceImpl/proto.c +index db7159ee..c4f85b02 100644 +--- a/vgauth/serviceImpl/proto.c ++++ b/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019-2021 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.38.0 + -- 2.38.0 From angelo at amarulasolutions.com Wed Oct 19 09:03:09 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 11:03:09 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package Message-ID: <20221019090309.1410432-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- V2: * Adding me to DEVELOPERS DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..9eb5400999 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..56af3d426b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 locally computed +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..e4e93b4c31 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From moritz at h6t.eu Wed Oct 19 08:53:53 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Wed, 19 Oct 2022 10:53:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds Message-ID: <20221019085353.8864-1-moritz@h6t.eu> From: Moritz Bitsch * when not supplying --release to cargo various optimizations get disabled, resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG * Debug symbol generation can be controlled with the RUSTFLAGS variable: add -g to RUSTFLAGS for debug symbols Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..7ce7867f67 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ # and should be removed when fixed upstream # ifeq ($(NORMALIZED_ARCH),arm) - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition endif +ifeq ($(BR2_ENABLE_DEBUG),y) + PKG_CARGO_RUSTFLAGS += -g +endif + +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) + HOST_PKG_CARGO_ENV = \ $(PKG_COMMON_CARGO_ENV) @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS $$($(2)_CARGO_ENV) \ cargo build \ --offline \ - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ --manifest-path Cargo.toml \ --locked \ $$($(2)_CARGO_BUILD_OPTS) -- 2.37.3 From d.lang at abatec.at Wed Oct 19 09:14:20 2022 From: d.lang at abatec.at (Lang Daniel) Date: Wed, 19 Oct 2022 09:14:20 +0000 Subject: [Buildroot] [PATCH 1/1] package/paho-mqtt-c: bump to version 1.3.11 Message-ID: Service release. Issues resolved: https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 Signed-off-by: Daniel Lang --- package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/paho-mqtt-c/paho-mqtt-c.hash b/package/paho-mqtt-c/paho-mqtt-c.hash index 931bf5b9c8..1949abdf1a 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.hash +++ b/package/paho-mqtt-c/paho-mqtt-c.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c70db96e66adacae411d5d875fbb08bca6ff9945de3d215b3af93cbd22792db5 paho-mqtt-c-1.3.10.tar.gz +sha256 d7bba3f8b8978802e11e2b1f28e96e6b7f4ed5d8a268af52a4d3b1bcbd1db16b paho-mqtt-c-1.3.11.tar.gz sha256 83bbba033dc985487e321b6dfde111772affb73460be48726299fed3da684b1c edl-v10 sha256 0becf16567beb77fa252b7664631dd177c8f9a1889e48995b45379c7130e5303 epl-v20 sha256 bc0f3f447097eb82a29ad6c2f4929572bb548b6bd4c9e38fde1bf131a771b7a0 LICENSE diff --git a/package/paho-mqtt-c/paho-mqtt-c.mk b/package/paho-mqtt-c/paho-mqtt-c.mk index 1b6fc5785c..30daf863ad 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.mk +++ b/package/paho-mqtt-c/paho-mqtt-c.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHO_MQTT_C_VERSION = 1.3.10 +PAHO_MQTT_C_VERSION = 1.3.11 PAHO_MQTT_C_SITE = $(call github,eclipse,paho.mqtt.c,v$(PAHO_MQTT_C_VERSION)) PAHO_MQTT_C_LICENSE = EPL-2.0 or BSD-3-Clause PAHO_MQTT_C_LICENSE_FILES = epl-v20 edl-v10 LICENSE -- 2.25.1 From dumasv.dev at gmail.com Wed Oct 19 12:40:16 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Wed, 19 Oct 2022 14:40:16 +0200 Subject: [Buildroot] [PATCH v3] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221019124017.427199-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From marcus.hoffmann at othermo.de Wed Oct 19 12:56:50 2022 From: marcus.hoffmann at othermo.de (Marcus Hoffmann) Date: Wed, 19 Oct 2022 14:56:50 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package In-Reply-To: <20221019090309.1410432-1-angelo@amarulasolutions.com> References: <20221019090309.1410432-1-angelo@amarulasolutions.com> Message-ID: <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> Thanks, I've been meaning to submit this as well but didn't get around to it yet. On 19.10.22 11:03, Angelo Compagnucci wrote: > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > Signed-off-by: Angelo Compagnucci One somewhat general question below, but otherwise this looks all good. Reviewed-by: Marcus Hoffmann > --- > V2: > * Adding me to DEVELOPERS > > DEVELOPERS | 1 + > package/Config.in | 1 + > package/python-minimalmodbus/Config.in | 7 +++++++ > .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ > .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ > 5 files changed, 27 insertions(+) > create mode 100644 package/python-minimalmodbus/Config.in > create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash > create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..9eb5400999 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ > F: package/monolite/ > F: package/openjpeg/ > F: package/python-can/ > +F: package/python-minimalmodbus/ > F: package/python-pillow/ > F: package/python-pydal/ > F: package/python-spidev/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..08574931f8 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1112,6 +1112,7 @@ menu "External python modules" > source "package/python-mbstrdecoder/Config.in" > source "package/python-memory-profiler/Config.in" > source "package/python-mimeparse/Config.in" > + source "package/python-minimalmodbus/Config.in" > source "package/python-mistune/Config.in" > source "package/python-modbus-tk/Config.in" > source "package/python-more-itertools/Config.in" > diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in > new file mode 100644 > index 0000000000..fd0f33e0d4 > --- /dev/null > +++ b/package/python-minimalmodbus/Config.in > @@ -0,0 +1,7 @@ > +config BR2_PACKAGE_PYTHON_MINIMALMODBUS > + bool "python-minimalmodbus" > + select BR2_PACKAGE_PYTHON_SERIAL # runtime > + help > + Easy-to-use Modbus RTU and Modbus ASCII implementation. > + > + https://minimalmodbus.readthedocs.io/ > diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash > new file mode 100644 > index 0000000000..56af3d426b > --- /dev/null > +++ b/package/python-minimalmodbus/python-minimalmodbus.hash > @@ -0,0 +1,4 @@ > +# sha256 locally computed > +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz > +# Hash for license file > +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE > diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk > new file mode 100644 > index 0000000000..e4e93b4c31 > --- /dev/null > +++ b/package/python-minimalmodbus/python-minimalmodbus.mk > @@ -0,0 +1,14 @@ > +################################################################################ > +# > +# python-minimalmodbus > +# > +################################################################################ > + > +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 > +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz > +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) I used ./utils/scanpypi and thus have https://files.pythonhosted.org as a site. Does buildroot have any preference for which upstream version of python packages to prefer if both work? > +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 > +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE > + > +$(eval $(python-package)) Best, Marcus From angelo at amarulasolutions.com Wed Oct 19 13:27:13 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:27:13 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package In-Reply-To: <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> References: <20221019090309.1410432-1-angelo@amarulasolutions.com> <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> Message-ID: On Wed, Oct 19, 2022 at 2:56 PM Marcus Hoffmann wrote: > Thanks, > > I've been meaning to submit this as well but didn't get around to it yet. > > On 19.10.22 11:03, Angelo Compagnucci wrote: > > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > > > Signed-off-by: Angelo Compagnucci > > One somewhat general question below, but otherwise this looks all good. > > Reviewed-by: Marcus Hoffmann > > > --- > > V2: > > * Adding me to DEVELOPERS > > > > DEVELOPERS | 1 + > > package/Config.in | 1 + > > package/python-minimalmodbus/Config.in | 7 +++++++ > > .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ > > .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ > > 5 files changed, 27 insertions(+) > > create mode 100644 package/python-minimalmodbus/Config.in > > create mode 100644 > package/python-minimalmodbus/python-minimalmodbus.hash > > create mode 100644 package/python-minimalmodbus/ > python-minimalmodbus.mk > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > index c0e6f8bbef..9eb5400999 100644 > > --- a/DEVELOPERS > > +++ b/DEVELOPERS > > @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ > > F: package/monolite/ > > F: package/openjpeg/ > > F: package/python-can/ > > +F: package/python-minimalmodbus/ > > F: package/python-pillow/ > > F: package/python-pydal/ > > F: package/python-spidev/ > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..08574931f8 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -1112,6 +1112,7 @@ menu "External python modules" > > source "package/python-mbstrdecoder/Config.in" > > source "package/python-memory-profiler/Config.in" > > source "package/python-mimeparse/Config.in" > > + source "package/python-minimalmodbus/Config.in" > > source "package/python-mistune/Config.in" > > source "package/python-modbus-tk/Config.in" > > source "package/python-more-itertools/Config.in" > > diff --git a/package/python-minimalmodbus/Config.in > b/package/python-minimalmodbus/Config.in > > new file mode 100644 > > index 0000000000..fd0f33e0d4 > > --- /dev/null > > +++ b/package/python-minimalmodbus/Config.in > > @@ -0,0 +1,7 @@ > > +config BR2_PACKAGE_PYTHON_MINIMALMODBUS > > + bool "python-minimalmodbus" > > + select BR2_PACKAGE_PYTHON_SERIAL # runtime > > + help > > + Easy-to-use Modbus RTU and Modbus ASCII implementation. > > + > > + https://minimalmodbus.readthedocs.io/ > > diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash > b/package/python-minimalmodbus/python-minimalmodbus.hash > > new file mode 100644 > > index 0000000000..56af3d426b > > --- /dev/null > > +++ b/package/python-minimalmodbus/python-minimalmodbus.hash > > @@ -0,0 +1,4 @@ > > +# sha256 locally computed > > +sha256 > aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 > minimalmodbus-2.0.1.tar.gz > > +# Hash for license file > > +sha256 > abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE > > diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk > b/package/python-minimalmodbus/python-minimalmodbus.mk > > new file mode 100644 > > index 0000000000..e4e93b4c31 > > --- /dev/null > > +++ b/package/python-minimalmodbus/python-minimalmodbus.mk > > @@ -0,0 +1,14 @@ > > > +################################################################################ > > +# > > +# python-minimalmodbus > > +# > > > +################################################################################ > > + > > +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 > > +PYTHON_MINIMALMODBUS_SOURCE = > minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz > > +PYTHON_MINIMALMODBUS_SITE = $(call > github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) > > I used ./utils/scanpypi and thus have https://files.pythonhosted.org as > a site. Does buildroot have any preference for which upstream version of > python packages to prefer if both work? > I don't know, honestly. I was using it from git, and it appeared natural to me to submit that way. Anyway, it is probably better to have it from pypi. Let me spin around another revision. > > +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools > > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 > > +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE > > + > +$(eval $(python-package)) > > Best, > Marcus > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 13:35:11 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:35:11 +0200 Subject: [Buildroot] [PATCH v3] package/python-minimalmodbus: new package Message-ID: <20221019133511.1717939-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- V2: * Adding me to DEVELOPERS V3: * Move to pypi (Marcus Hoffmann) DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..9eb5400999 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..b29e83773b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 from https://pypi.org/project/minimalmodbus +sha256 cf873a2530be3f4b86467c3e4d47b5f69fd345d47451baca4adbf59e2ac36d00 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..434323ccf8 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = https://files.pythonhosted.org/packages/78/99/8cd22b4465e697bae2b02fd06aaccd4c5cdfbb18945d728db99f23d71df9 +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From angelo at amarulasolutions.com Wed Oct 19 13:42:21 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:42:21 +0200 Subject: [Buildroot] [PATCH v3] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: Hi Victor, On Wed, Oct 19, 2022 at 2:40 PM Victor Dumas wrote: > Using "xargs" instead of "while read" loop allows for the patching of > files to be parallelized, significantly reducing the amount of time it > takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 > minutes, it now only takes about 30s on a 12 core machine > I think you should split the commit message, it looks to me single really long line. > > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- > 1 file changed, 38 insertions(+), 28 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..7ed1851aac 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@ > ${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" > ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -123,34 +157,10 @@ main() { > ;; > esac > > - find_args+=( "-type" "f" "-print" ) > - > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@ > ${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" > ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + find_args+=( "-type" "f" "-print0" ) > + > + export -f patch_file > + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} > bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" > _ {} > I'm seeing here you capped the xargs with nproc, but that couldn't be always the optimal solution. On lesser powerful machines, that could suck all the core for a very long time (experimenting here on my machine ;) ) . Probably you should cap to nproc-2 for example or look for the BR2_JLEVEL or something similar. _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From giulio.benetti at benettiengineering.com Wed Oct 19 13:48:23 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 15:48:23 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in Message-ID: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO specifically: * Switch to use LIB80211. * Switch to use MAC80211. * Switch to use CFG80211. So let's remove the description that is not valid anymore. Suggested-by: Luca Ceresoli Signed-off-by: Giulio Benetti --- V1->V2: * improve Config.in description as pointed by Luca Ceresoli --- package/rtl8188eu/Config.in | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in index 76d9085297..2fab1fd5c0 100644 --- a/package/rtl8188eu/Config.in +++ b/package/rtl8188eu/Config.in @@ -4,9 +4,10 @@ config BR2_PACKAGE_RTL8188EU depends on BR2_LINUX_KERNEL help A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. + This rtl8188eu driver is not the same as the one in mainline + Linux that still has pending work to be done that in this + driver is done, check: + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO Make sure your target kernel has the CONFIG_WIRELESS_EXT config option enabled. -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 19 13:49:20 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 15:49:20 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019091512.77a48aa8@booty> References: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> <20221019091512.77a48aa8@booty> Message-ID: Hi Luca, On 19/10/22 09:15, Luca Ceresoli via buildroot wrote: > Hi Giulio, > > On Tue, 18 Oct 2022 15:15:06 +0200 > Giulio Benetti wrote: > >> This rtl8188eu driver is not the same as the one in mainline Linux that >> still has pending work to be done that in this driver is done, check: >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO >> specifically: >> * Switch to use LIB80211. >> * Switch to use MAC80211. >> * Switch to use CFG80211. >> So let's remove the description that is not valid anymore. > > A lot of this text would be useful in the help text below. The help > text is visible in any moment in later releases, the commit log needs > to be searched. > >> Suggested-by: Luca Ceresoli >> Signed-off-by: Giulio Benetti >> --- >> package/rtl8188eu/Config.in | 3 --- >> 1 file changed, 3 deletions(-) >> >> diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in >> index 76d9085297..8d68d104c8 100644 >> --- a/package/rtl8188eu/Config.in >> +++ b/package/rtl8188eu/Config.in >> @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU >> depends on BR2_LINUX_KERNEL >> help >> A standalone driver for the RTL8188EU USB Wi-Fi adapter. >> - This is needed only for Linux kernels before 3.12. >> - Since 3.12, there is a (staging) driver in mainline, with a >> - similar codebase. > > For the above reasons, I'd add here: > > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > > I'd not add the todo list, as it will (hopefully) change in the future > in the kernel and we don't want to keep updating our own copy. Good idea. Thank you for taking care. I've just sent v2 patch: https://patchwork.ozlabs.org/project/buildroot/patch/20221019134823.12594-1-giulio.benetti at benettiengineering.com/ Kind regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas From gwenj at trabucayre.com Wed Oct 19 13:43:28 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Wed, 19 Oct 2022 15:43:28 +0200 Subject: [Buildroot] [PATCH v5] package/gnuradio: bump version to 3.10.4.0 Message-ID: <1666187008-64454-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou - remove all no more required patches - backport 2 patches to fix failures induces by missing headers - add dependency to SPDLOG - add pybind dependency where python is set Note: - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, bindings and python wrappers are produces using pybind: this why python-pybind is a buildtime dependency. As mentionned in [1], this one is a stagging only package: headers must be into staging directory, so it can't be host and at the same time since this package provides only headers and .cmake files nothing has to be installed into the target directory. A select is required because it's not an host package and GNURADIO_DEPENDENCIES is updated with python-pybind to have pybind present before gnuradio's build. - host-python-numpy is now required since some cpp bindings uses numpy's functions directly. python-numpy (target package) is left required because python blocks and wrappers needs this library at runtime. [1] http://lists.busybox.net/pipermail/buildroot/2022-October/653030.html Signed-off-by: Gwenhael Goavec-Merou --- Changes v4 -> v5: - re-add python-pybind select Changes v3 -> v4: - re-add runtime comment for numpy - remove python-pybind select - rework commit message Changes v2 -> v3: - update gnuradio version 3.10.3.0 -> 3.10.4.0 - remove patch to fix libfmt9 (now applied) - backport two patch to fix failures due to missing header - explain in commit message why pybind and numpy are now required at buildtime (Thomas) Changes v1 -> v2: - remove #runtime comment for PYTHON_NUMPY and PYTHON_PYBIND (Thomas) - remove host-python-mako to the dependencies list (now useless) (Thomas) - backport patch to fix build failure with libfmt > 9 --- ...g-missing-vector-in-blockinterleaver.patch | 42 + ....h-drop-boost-cstdint.hpp-and-use-cs.patch | 39 - ...rleaving.h-add-missing-cstddef-heade.patch | 33 + ...aceholders_with_their_full_namespace.patch | 1012 ----------------- ...rdcode-INTERFACE_INCLUDE_DIRECTORIES.patch | 57 - ...add-examples-c-subdirectory-when-gr-.patch | 55 - ...ve-deprecated-math-common_factor.hpp.patch | 165 --- package/gnuradio/Config.in | 5 +- package/gnuradio/gnuradio.hash | 2 +- package/gnuradio/gnuradio.mk | 12 +- 10 files changed, 84 insertions(+), 1338 deletions(-) create mode 100644 package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch delete mode 100644 package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch create mode 100644 package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch delete mode 100644 package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch delete mode 100644 package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch delete mode 100644 package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch delete mode 100644 package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch diff --git a/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch new file mode 100644 index 0000000000..f805e300af --- /dev/null +++ b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch @@ -0,0 +1,42 @@ +From 45fe4ac55ad88b6793d225e676205c30388ec138 Mon Sep 17 00:00:00 2001 +From: Ryan Volz +Date: Fri, 16 Sep 2022 21:05:51 -0400 +Subject: [PATCH 1/2] blocks: Including missing in blockinterleaver. + +Signed-off-by: Ryan Volz +[Retrieved (and backported) from: +https://github.com/gnuradio/gnuradio/commit/463c3477549b26b32d9b73eef30044e97c4eee64] +Signed-off-by: Gwenhael Goavec-Merou +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 2 +- + gr-blocks/lib/blockinterleaving.cc | 1 + + 2 files changed, 2 insertions(+), 1 deletion(-) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index 9d4e0f249..df831fe5a 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -12,7 +12,7 @@ + #define INCLUDED_GR_BLOCKS_BLOCKINTERLEAVING_H + + #include +- ++#include + + namespace gr { + namespace blocks { +diff --git a/gr-blocks/lib/blockinterleaving.cc b/gr-blocks/lib/blockinterleaving.cc +index fc5873e11..768ad9ea7 100644 +--- a/gr-blocks/lib/blockinterleaving.cc ++++ b/gr-blocks/lib/blockinterleaving.cc +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch b/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch deleted file mode 100644 index 532bebcf2e..0000000000 --- a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f643bc12100c67288adda3699a9e61d6a66fb529 Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Fri, 7 Feb 2020 16:49:30 +0100 -Subject: [PATCH] gr-digital:glfsr.h: drop boost/cstdint.hpp and use cstdint - -gr-digital/glfsr.h include boost/cstdint.hpp to have uintxx_t. -These types are in boost namespace but nor using namespace xxx, nor boost:: are used. -The result is : -In file included from /home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/glfsr.cc:23: -/home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/../include/gnuradio/digital/glfsr.h:42:5: error: 'uint32_t' does not name a type; did you mean 'u_int32_t'? -uint32_t d_shift_register; -^~~~~~~~ -u_int32_t - -Since Gnuradio policy is Less boost == better and C++11 is used, use cstdint -instead of boost/cstdint.hpp. - -[backported from 475e4a156b516c089175afb998acdc80b740b437] -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-digital/include/gnuradio/digital/glfsr.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gr-digital/include/gnuradio/digital/glfsr.h b/gr-digital/include/gnuradio/digital/glfsr.h -index 0b5141f1f..1003bcd01 100644 ---- a/gr-digital/include/gnuradio/digital/glfsr.h -+++ b/gr-digital/include/gnuradio/digital/glfsr.h -@@ -24,7 +24,7 @@ - #define INCLUDED_DIGITAL_GLFSR_H - - #include --#include -+#include - - namespace gr { - namespace digital { --- -2.24.1 - diff --git a/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch new file mode 100644 index 0000000000..d551793be5 --- /dev/null +++ b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch @@ -0,0 +1,33 @@ +From 901c2ad1ac88908a2e6db5615d5af39a218d826d Mon Sep 17 00:00:00 2001 +From: Gwenhael Goavec-Merou +Date: Fri, 23 Sep 2022 08:41:26 +0200 +Subject: [PATCH 2/2] blocks/blockinterleaving.h: add missing cstddef header + (required for size_t) + +Fix build failure like: + +gnuradio/gr-blocks/lib/../include/gnuradio/blocks/blockinterleaving.h:25:36: error: ???size_t??? was not declared in this scope + +This failure is due to the miss of cstddef include + +Signed-off-by: Gwenhael Goavec-Merou +[Upstream status: https://github.com/gnuradio/gnuradio/pull/6188] +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index df831fe5a..33c59e35b 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -13,6 +13,7 @@ + + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch b/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch deleted file mode 100644 index 431cc12522..0000000000 --- a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch +++ /dev/null @@ -1,1012 +0,0 @@ -From 5d4c317a372c77aa70df6ab3403d161cd41a7d17 Mon Sep 17 00:00:00 2001 -From: ponce -Date: Sun, 17 May 2020 14:02:57 +0200 -Subject: [PATCH] boost: qualify placeholders with their full namespace. - -This is needed with boost >= 1.73.0. - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3566] - -Signed-off-by: ponce -Signed-off-by: Gwenhael Goavec-Merou ---- - .../(exported from wiki) Message Passing.txt | 8 +++--- - gnuradio-runtime/lib/block.cc | 3 ++- - gr-blocks/lib/copy_impl.cc | 4 ++- - gr-blocks/lib/message_debug_impl.cc | 13 +++++++--- - gr-blocks/lib/message_strobe_impl.cc | 5 ++-- - gr-blocks/lib/message_strobe_random_impl.cc | 5 ++-- - gr-blocks/lib/multiply_matrix_impl.cc | 11 +++++--- - gr-blocks/lib/mute_impl.cc | 5 ++-- - gr-blocks/lib/nop_impl.cc | 5 ++-- - gr-blocks/lib/pdu_filter_impl.cc | 5 ++-- - gr-blocks/lib/pdu_remove_impl.cc | 5 ++-- - gr-blocks/lib/pdu_set_impl.cc | 4 ++- - gr-blocks/lib/random_pdu_impl.cc | 5 ++-- - gr-blocks/lib/repeat_impl.cc | 5 ++-- - gr-blocks/lib/socket_pdu_impl.cc | 18 ++++++++----- - .../lib/tagged_stream_multiply_length_impl.cc | 7 +++--- - gr-blocks/lib/tuntap_pdu_impl.cc | 3 ++- - gr-digital/lib/chunks_to_symbols_impl.cc | 5 ++-- - .../lib/constellation_receiver_cb_impl.cc | 14 ++++++----- - gr-digital/lib/costas_loop_cc_impl.cc | 4 ++- - gr-digital/lib/crc32_async_bb_impl.cc | 8 ++++-- - gr-digital/lib/header_payload_demux_impl.cc | 7 +++--- - .../lib/protocol_formatter_async_impl.cc | 4 ++- - gr-fec/lib/async_decoder_impl.cc | 8 ++++-- - gr-fec/lib/async_encoder_impl.cc | 8 ++++-- - gr-fec/lib/depuncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_ff_impl.cc | 4 ++- - gr-filter/lib/freq_xlating_fir_filter_impl.cc | 2 +- - gr-filter/lib/mmse_resampler_cc_impl.cc | 5 ++-- - gr-filter/lib/mmse_resampler_ff_impl.cc | 5 ++-- - gr-qtgui/lib/const_sink_c_impl.cc | 5 ++-- - gr-qtgui/lib/edit_box_msg_impl.cc | 4 ++- - gr-qtgui/lib/freq_sink_c_impl.cc | 12 ++++++--- - gr-qtgui/lib/freq_sink_f_impl.cc | 12 ++++++--- - gr-qtgui/lib/histogram_sink_f_impl.cc | 5 ++-- - gr-qtgui/lib/sink_c_impl.cc | 4 ++- - gr-qtgui/lib/sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_b_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_c_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/waterfall_sink_c_impl.cc | 13 +++++++--- - gr-qtgui/lib/waterfall_sink_f_impl.cc | 13 +++++++--- - gr-uhd/lib/usrp_block_impl.cc | 25 ++++++++++++------- - gr-uhd/lib/usrp_source_impl.cc | 5 ++-- - gr-zeromq/lib/pub_msg_sink_impl.cc | 4 ++- - gr-zeromq/lib/push_msg_sink_impl.cc | 4 ++- - 48 files changed, 213 insertions(+), 106 deletions(-) - -diff --git a/docs/usage-manual/(exported from wiki) Message Passing.txt b/docs/usage-manual/(exported from wiki) Message Passing.txt -index 4654bd5da..551e71022 100644 ---- a/docs/usage-manual/(exported from wiki) Message Passing.txt -+++ b/docs/usage-manual/(exported from wiki) Message Passing.txt -@@ -94,7 +94,7 @@ must then bind this port to the message handler. For this, we use - Boost's 'bind' function: - - set_msg_handler(pmt::pmt_t port_id, -- boost::bind(&block_class::message_handler_function, this, _1)); -+ boost::bind(&block_class::message_handler_function, this, boost::placeholders::_1)); - - In Python: - -@@ -241,15 +241,15 @@ The constructor of this block looks like this: - { - message_port_register_in(pmt::mp("print")); - set_msg_handler(pmt::mp("print"), -- boost::bind(&message_debug_impl::print, this, _1)); -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); - set_msg_handler(pmt::mp("store"), -- boost::bind(&message_debug_impl::store, this, _1)); -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); - set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - -diff --git a/gnuradio-runtime/lib/block.cc b/gnuradio-runtime/lib/block.cc -index 591428390..fca4cab97 100644 ---- a/gnuradio-runtime/lib/block.cc -+++ b/gnuradio-runtime/lib/block.cc -@@ -61,7 +61,8 @@ block::block(const std::string& name, - { - global_block_registry.register_primitive(alias(), this); - message_port_register_in(d_system_port); -- set_msg_handler(d_system_port, boost::bind(&block::system_handler, this, _1)); -+ set_msg_handler(d_system_port, -+ boost::bind(&block::system_handler, this, boost::placeholders::_1)); - - configure_default_loggers(d_logger, d_debug_logger, symbol_name()); - } -diff --git a/gr-blocks/lib/copy_impl.cc b/gr-blocks/lib/copy_impl.cc -index c377e57b1..b55196c24 100644 ---- a/gr-blocks/lib/copy_impl.cc -+++ b/gr-blocks/lib/copy_impl.cc -@@ -44,7 +44,9 @@ copy_impl::copy_impl(size_t itemsize) - d_enabled(true) - { - message_port_register_in(pmt::mp("en")); -- set_msg_handler(pmt::mp("en"), boost::bind(©_impl::handle_enable, this, _1)); -+ set_msg_handler( -+ pmt::mp("en"), -+ boost::bind(©_impl::handle_enable, this, boost::placeholders::_1)); - } - - copy_impl::~copy_impl() {} -diff --git a/gr-blocks/lib/message_debug_impl.cc b/gr-blocks/lib/message_debug_impl.cc -index a8c84aa50..916f97ca3 100644 ---- a/gr-blocks/lib/message_debug_impl.cc -+++ b/gr-blocks/lib/message_debug_impl.cc -@@ -90,14 +90,19 @@ message_debug_impl::message_debug_impl() - : block("message_debug", io_signature::make(0, 0, 0), io_signature::make(0, 0, 0)) - { - message_port_register_in(pmt::mp("print")); -- set_msg_handler(pmt::mp("print"), boost::bind(&message_debug_impl::print, this, _1)); -+ set_msg_handler( -+ pmt::mp("print"), -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); -- set_msg_handler(pmt::mp("store"), boost::bind(&message_debug_impl::store, this, _1)); -+ set_msg_handler( -+ pmt::mp("store"), -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); -- set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("print_pdu"), -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - message_debug_impl::~message_debug_impl() {} -diff --git a/gr-blocks/lib/message_strobe_impl.cc b/gr-blocks/lib/message_strobe_impl.cc -index 038eeae5a..d131b8166 100644 ---- a/gr-blocks/lib/message_strobe_impl.cc -+++ b/gr-blocks/lib/message_strobe_impl.cc -@@ -53,8 +53,9 @@ message_strobe_impl::message_strobe_impl(pmt::pmt_t msg, long period_ms) - message_port_register_out(d_port); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_impl::set_msg, this, boost::placeholders::_1)); - } - - message_strobe_impl::~message_strobe_impl() {} -diff --git a/gr-blocks/lib/message_strobe_random_impl.cc b/gr-blocks/lib/message_strobe_random_impl.cc -index 0ab5d6adc..53e641fba 100644 ---- a/gr-blocks/lib/message_strobe_random_impl.cc -+++ b/gr-blocks/lib/message_strobe_random_impl.cc -@@ -74,8 +74,9 @@ message_strobe_random_impl::message_strobe_random_impl( - new gr::thread::thread(boost::bind(&message_strobe_random_impl::run, this))); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_random_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_random_impl::set_msg, this, boost::placeholders::_1)); - } - - long message_strobe_random_impl::next_delay() -diff --git a/gr-blocks/lib/multiply_matrix_impl.cc b/gr-blocks/lib/multiply_matrix_impl.cc -index e1b9c746c..e38953bab 100644 ---- a/gr-blocks/lib/multiply_matrix_impl.cc -+++ b/gr-blocks/lib/multiply_matrix_impl.cc -@@ -235,9 +235,10 @@ multiply_matrix_impl::multiply_matrix_impl( - - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); -- set_msg_handler( -- port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ set_msg_handler(port_name, -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - template <> -@@ -257,7 +258,9 @@ multiply_matrix_impl::multiply_matrix_impl( - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); - set_msg_handler(port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - -diff --git a/gr-blocks/lib/mute_impl.cc b/gr-blocks/lib/mute_impl.cc -index bd65ce207..5c732f8f4 100644 ---- a/gr-blocks/lib/mute_impl.cc -+++ b/gr-blocks/lib/mute_impl.cc -@@ -47,8 +47,9 @@ mute_impl::mute_impl(bool mute) - d_mute(mute) - { - this->message_port_register_in(pmt::intern("set_mute")); -- this->set_msg_handler(pmt::intern("set_mute"), -- boost::bind(&mute_impl::set_mute_pmt, this, _1)); -+ this->set_msg_handler( -+ pmt::intern("set_mute"), -+ boost::bind(&mute_impl::set_mute_pmt, this, boost::placeholders::_1)); - } - - template -diff --git a/gr-blocks/lib/nop_impl.cc b/gr-blocks/lib/nop_impl.cc -index db216d97a..e9baee587 100644 ---- a/gr-blocks/lib/nop_impl.cc -+++ b/gr-blocks/lib/nop_impl.cc -@@ -44,8 +44,9 @@ nop_impl::nop_impl(size_t sizeof_stream_item) - { - // Arrange to have count_received_msgs called when messages are received. - message_port_register_in(pmt::mp("port")); -- set_msg_handler(pmt::mp("port"), -- boost::bind(&nop_impl::count_received_msgs, this, _1)); -+ set_msg_handler( -+ pmt::mp("port"), -+ boost::bind(&nop_impl::count_received_msgs, this, boost::placeholders::_1)); - } - - nop_impl::~nop_impl() {} -diff --git a/gr-blocks/lib/pdu_filter_impl.cc b/gr-blocks/lib/pdu_filter_impl.cc -index b0748eec0..63cfe47e4 100644 ---- a/gr-blocks/lib/pdu_filter_impl.cc -+++ b/gr-blocks/lib/pdu_filter_impl.cc -@@ -44,8 +44,9 @@ pdu_filter_impl::pdu_filter_impl(pmt::pmt_t k, pmt::pmt_t v, bool invert) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_filter_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_filter_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_filter_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_remove_impl.cc b/gr-blocks/lib/pdu_remove_impl.cc -index 19cc4dc76..2b97f827b 100644 ---- a/gr-blocks/lib/pdu_remove_impl.cc -+++ b/gr-blocks/lib/pdu_remove_impl.cc -@@ -42,8 +42,9 @@ pdu_remove_impl::pdu_remove_impl(pmt::pmt_t k) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_remove_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_remove_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_remove_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_set_impl.cc b/gr-blocks/lib/pdu_set_impl.cc -index 40fbc3cd8..af59ef70f 100644 ---- a/gr-blocks/lib/pdu_set_impl.cc -+++ b/gr-blocks/lib/pdu_set_impl.cc -@@ -43,7 +43,9 @@ pdu_set_impl::pdu_set_impl(pmt::pmt_t k, pmt::pmt_t v) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&pdu_set_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_set_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_set_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/random_pdu_impl.cc b/gr-blocks/lib/random_pdu_impl.cc -index 75d825aef..6c142c353 100644 ---- a/gr-blocks/lib/random_pdu_impl.cc -+++ b/gr-blocks/lib/random_pdu_impl.cc -@@ -52,8 +52,9 @@ random_pdu_impl::random_pdu_impl(int min_items, - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pmt::mp("generate")); -- set_msg_handler(pmt::mp("generate"), -- boost::bind(&random_pdu_impl::generate_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("generate"), -+ boost::bind(&random_pdu_impl::generate_pdu, this, boost::placeholders::_1)); - if (length_modulo < 1) - throw std::runtime_error("length_module must be >= 1"); - if (max_items < length_modulo) -diff --git a/gr-blocks/lib/repeat_impl.cc b/gr-blocks/lib/repeat_impl.cc -index 189fbc894..d6569625d 100644 ---- a/gr-blocks/lib/repeat_impl.cc -+++ b/gr-blocks/lib/repeat_impl.cc -@@ -44,8 +44,9 @@ repeat_impl::repeat_impl(size_t itemsize, int interp) - d_interp(interp) - { - message_port_register_in(pmt::mp("interpolation")); -- set_msg_handler(pmt::mp("interpolation"), -- boost::bind(&repeat_impl::msg_set_interpolation, this, _1)); -+ set_msg_handler( -+ pmt::mp("interpolation"), -+ boost::bind(&repeat_impl::msg_set_interpolation, this, boost::placeholders::_1)); - } - - void repeat_impl::msg_set_interpolation(pmt::pmt_t msg) -diff --git a/gr-blocks/lib/socket_pdu_impl.cc b/gr-blocks/lib/socket_pdu_impl.cc -index df69f07ad..163eec3a6 100644 ---- a/gr-blocks/lib/socket_pdu_impl.cc -+++ b/gr-blocks/lib/socket_pdu_impl.cc -@@ -101,7 +101,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - start_tcp_accept(); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_server_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_server_send, -+ this, -+ boost::placeholders::_1)); - } else if (type == "TCP_CLIENT") { - boost::system::error_code error = boost::asio::error::host_not_found; - d_tcp_socket.reset(new boost::asio::ip::tcp::socket(d_io_service)); -@@ -111,7 +113,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - d_tcp_socket->set_option(boost::asio::ip::tcp::no_delay(d_tcp_no_delay)); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_client_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_client_send, -+ this, -+ boost::placeholders::_1)); - - d_tcp_socket->async_read_some( - boost::asio::buffer(d_rxbuf), -@@ -130,8 +134,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else if (type == "UDP_CLIENT") { - d_udp_socket.reset( - new boost::asio::ip::udp::socket(d_io_service, d_udp_endpoint)); -@@ -143,8 +148,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else - throw std::runtime_error("gr::blocks:socket_pdu: unknown socket type"); - -diff --git a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -index 30f4c46dc..34b95d647 100644 ---- a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -+++ b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -@@ -49,9 +49,10 @@ tagged_stream_multiply_length_impl::tagged_stream_multiply_length_impl( - set_tag_propagation_policy(TPP_DONT); - set_relative_rate(1, 1); - message_port_register_in(pmt::intern("set_scalar")); -- set_msg_handler( -- pmt::intern("set_scalar"), -- boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, this, _1)); -+ set_msg_handler(pmt::intern("set_scalar"), -+ boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, -+ this, -+ boost::placeholders::_1)); - } - - tagged_stream_multiply_length_impl::~tagged_stream_multiply_length_impl() {} -diff --git a/gr-blocks/lib/tuntap_pdu_impl.cc b/gr-blocks/lib/tuntap_pdu_impl.cc -index 4343ae1dc..0d9d7e28c 100644 ---- a/gr-blocks/lib/tuntap_pdu_impl.cc -+++ b/gr-blocks/lib/tuntap_pdu_impl.cc -@@ -96,7 +96,8 @@ tuntap_pdu_impl::tuntap_pdu_impl(std::string dev, int MTU, bool istunflag) - - // set up input message port - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&tuntap_pdu_impl::send, this, _1)); -+ set_msg_handler(pdu::pdu_port_id(), -+ boost::bind(&tuntap_pdu_impl::send, this, boost::placeholders::_1)); - } - - int tuntap_pdu_impl::tun_alloc(char* dev, int flags) -diff --git a/gr-digital/lib/chunks_to_symbols_impl.cc b/gr-digital/lib/chunks_to_symbols_impl.cc -index 26d590a66..a6810a69e 100644 ---- a/gr-digital/lib/chunks_to_symbols_impl.cc -+++ b/gr-digital/lib/chunks_to_symbols_impl.cc -@@ -53,8 +53,9 @@ chunks_to_symbols_impl::chunks_to_symbols_impl( - this->message_port_register_in(pmt::mp("set_symbol_table")); - this->set_msg_handler( - pmt::mp("set_symbol_table"), -- boost::bind( -- &chunks_to_symbols_impl::handle_set_symbol_table, this, _1)); -+ boost::bind(&chunks_to_symbols_impl::handle_set_symbol_table, -+ this, -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-digital/lib/constellation_receiver_cb_impl.cc b/gr-digital/lib/constellation_receiver_cb_impl.cc -index 7fb7559d5..7e216ece5 100644 ---- a/gr-digital/lib/constellation_receiver_cb_impl.cc -+++ b/gr-digital/lib/constellation_receiver_cb_impl.cc -@@ -61,14 +61,16 @@ constellation_receiver_cb_impl::constellation_receiver_cb_impl( - "This receiver only works with constellations of dimension 1."); - - message_port_register_in(pmt::mp("set_constellation")); -- set_msg_handler( -- pmt::mp("set_constellation"), -- boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, this, _1)); -+ set_msg_handler(pmt::mp("set_constellation"), -+ boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, -+ this, -+ boost::placeholders::_1)); - - message_port_register_in(pmt::mp("rotate_phase")); -- set_msg_handler( -- pmt::mp("rotate_phase"), -- boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, this, _1)); -+ set_msg_handler(pmt::mp("rotate_phase"), -+ boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, -+ this, -+ boost::placeholders::_1)); - } - - constellation_receiver_cb_impl::~constellation_receiver_cb_impl() {} -diff --git a/gr-digital/lib/costas_loop_cc_impl.cc b/gr-digital/lib/costas_loop_cc_impl.cc -index c3b30834e..e1229e6f4 100644 ---- a/gr-digital/lib/costas_loop_cc_impl.cc -+++ b/gr-digital/lib/costas_loop_cc_impl.cc -@@ -82,7 +82,9 @@ costas_loop_cc_impl::costas_loop_cc_impl(float loop_bw, int order, bool use_snr) - - message_port_register_in(pmt::mp("noise")); - set_msg_handler(pmt::mp("noise"), -- boost::bind(&costas_loop_cc_impl::handle_set_noise, this, _1)); -+ boost::bind(&costas_loop_cc_impl::handle_set_noise, -+ this, -+ boost::placeholders::_1)); - } - - costas_loop_cc_impl::~costas_loop_cc_impl() {} -diff --git a/gr-digital/lib/crc32_async_bb_impl.cc b/gr-digital/lib/crc32_async_bb_impl.cc -index bffbb2a73..66143866c 100644 ---- a/gr-digital/lib/crc32_async_bb_impl.cc -+++ b/gr-digital/lib/crc32_async_bb_impl.cc -@@ -48,9 +48,13 @@ crc32_async_bb_impl::crc32_async_bb_impl(bool check) - message_port_register_out(d_out_port); - - if (check) -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::check, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::check, this, boost::placeholders::_1)); - else -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::calc, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::calc, this, boost::placeholders::_1)); - } - - crc32_async_bb_impl::~crc32_async_bb_impl() {} -diff --git a/gr-digital/lib/header_payload_demux_impl.cc b/gr-digital/lib/header_payload_demux_impl.cc -index 98c805fb2..7cc1e0a4e 100644 ---- a/gr-digital/lib/header_payload_demux_impl.cc -+++ b/gr-digital/lib/header_payload_demux_impl.cc -@@ -150,9 +150,10 @@ header_payload_demux_impl::header_payload_demux_impl( - } - set_tag_propagation_policy(TPP_DONT); - message_port_register_in(msg_port_id()); -- set_msg_handler( -- msg_port_id(), -- boost::bind(&header_payload_demux_impl::parse_header_data_msg, this, _1)); -+ set_msg_handler(msg_port_id(), -+ boost::bind(&header_payload_demux_impl::parse_header_data_msg, -+ this, -+ boost::placeholders::_1)); - for (size_t i = 0; i < special_tags.size(); i++) { - d_special_tags.push_back(pmt::string_to_symbol(special_tags[i])); - d_special_tags_last_value.push_back(pmt::PMT_NIL); -diff --git a/gr-digital/lib/protocol_formatter_async_impl.cc b/gr-digital/lib/protocol_formatter_async_impl.cc -index 84b693745..c08bbb9ae 100644 ---- a/gr-digital/lib/protocol_formatter_async_impl.cc -+++ b/gr-digital/lib/protocol_formatter_async_impl.cc -@@ -55,7 +55,9 @@ protocol_formatter_async_impl::protocol_formatter_async_impl( - message_port_register_out(d_pld_port); - - set_msg_handler(d_in_port, -- boost::bind(&protocol_formatter_async_impl::append, this, _1)); -+ boost::bind(&protocol_formatter_async_impl::append, -+ this, -+ boost::placeholders::_1)); - } - - protocol_formatter_async_impl::~protocol_formatter_async_impl() {} -diff --git a/gr-fec/lib/async_decoder_impl.cc b/gr-fec/lib/async_decoder_impl.cc -index e7a668c83..5d68d13ae 100644 ---- a/gr-fec/lib/async_decoder_impl.cc -+++ b/gr-fec/lib/async_decoder_impl.cc -@@ -65,10 +65,14 @@ async_decoder_impl::async_decoder_impl(generic_decoder::sptr my_decoder, - if (d_packed) { - d_pack = new blocks::kernel::pack_k_bits(8); - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_packed, this, _1)); -+ boost::bind(&async_decoder_impl::decode_packed, -+ this, -+ boost::placeholders::_1)); - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_unpacked, this, _1)); -+ boost::bind(&async_decoder_impl::decode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - // The maximum frame size is set by the initial frame size of the decoder. -diff --git a/gr-fec/lib/async_encoder_impl.cc b/gr-fec/lib/async_encoder_impl.cc -index 811d55601..506ae5c7e 100644 ---- a/gr-fec/lib/async_encoder_impl.cc -+++ b/gr-fec/lib/async_encoder_impl.cc -@@ -64,7 +64,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - if (d_packed) { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_packed, this, _1)); -+ boost::bind(&async_encoder_impl::encode_packed, -+ this, -+ boost::placeholders::_1)); - - d_unpack = new blocks::kernel::unpack_k_bits(8); - -@@ -74,7 +76,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_unpacked, this, _1)); -+ boost::bind(&async_encoder_impl::encode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - if (d_packed || (strncmp(d_encoder->get_input_conversion(), "pack", 4) == 0)) { -diff --git a/gr-fec/lib/depuncture_bb_impl.cc b/gr-fec/lib/depuncture_bb_impl.cc -index 27d00bb5b..f64dad45f 100644 ---- a/gr-fec/lib/depuncture_bb_impl.cc -+++ b/gr-fec/lib/depuncture_bb_impl.cc -@@ -74,7 +74,9 @@ depuncture_bb_impl::depuncture_bb_impl(int puncsize, int puncpat, int delay, cha - set_fixed_rate(true); - set_relative_rate((uint64_t)d_puncsize, (uint64_t)(d_puncsize - d_puncholes)); - set_output_multiple(d_puncsize); -- // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - depuncture_bb_impl::~depuncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_bb_impl.cc b/gr-fec/lib/puncture_bb_impl.cc -index a365d6a69..f2078d8c5 100644 ---- a/gr-fec/lib/puncture_bb_impl.cc -+++ b/gr-fec/lib/puncture_bb_impl.cc -@@ -72,7 +72,9 @@ puncture_bb_impl::puncture_bb_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_bb_impl::~puncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_ff_impl.cc b/gr-fec/lib/puncture_ff_impl.cc -index c95288d69..95fb649a8 100644 ---- a/gr-fec/lib/puncture_ff_impl.cc -+++ b/gr-fec/lib/puncture_ff_impl.cc -@@ -72,7 +72,9 @@ puncture_ff_impl::puncture_ff_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_ff_impl::~puncture_ff_impl() {} -diff --git a/gr-filter/lib/freq_xlating_fir_filter_impl.cc b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -index 8ddc967ba..50ec58947 100644 ---- a/gr-filter/lib/freq_xlating_fir_filter_impl.cc -+++ b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -@@ -72,7 +72,7 @@ freq_xlating_fir_filter_impl::freq_xlating_fir_filter_impl( - boost::bind( - &freq_xlating_fir_filter_impl::handle_set_center_freq, - this, -- _1)); -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-filter/lib/mmse_resampler_cc_impl.cc b/gr-filter/lib/mmse_resampler_cc_impl.cc -index 59f9eacfa..bdce51716 100644 ---- a/gr-filter/lib/mmse_resampler_cc_impl.cc -+++ b/gr-filter/lib/mmse_resampler_cc_impl.cc -@@ -52,8 +52,9 @@ mmse_resampler_cc_impl::mmse_resampler_cc_impl(float phase_shift, float resamp_r - - set_inverse_relative_rate(d_mu_inc); - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_cc_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_cc_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_cc_impl::~mmse_resampler_cc_impl() { delete d_resamp; } -diff --git a/gr-filter/lib/mmse_resampler_ff_impl.cc b/gr-filter/lib/mmse_resampler_ff_impl.cc -index 342d9f767..3d7272711 100644 ---- a/gr-filter/lib/mmse_resampler_ff_impl.cc -+++ b/gr-filter/lib/mmse_resampler_ff_impl.cc -@@ -53,8 +53,9 @@ mmse_resampler_ff_impl::mmse_resampler_ff_impl(float phase_shift, float resamp_r - set_inverse_relative_rate(d_mu_inc); - - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_ff_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_ff_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_ff_impl::~mmse_resampler_ff_impl() { delete d_resamp; } -diff --git a/gr-qtgui/lib/const_sink_c_impl.cc b/gr-qtgui/lib/const_sink_c_impl.cc -index 852f6ee10..04d421d03 100644 ---- a/gr-qtgui/lib/const_sink_c_impl.cc -+++ b/gr-qtgui/lib/const_sink_c_impl.cc -@@ -69,8 +69,9 @@ const_sink_c_impl::const_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&const_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&const_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - for (int i = 0; i < d_nconnections; i++) { - d_residbufs_real.push_back( -diff --git a/gr-qtgui/lib/edit_box_msg_impl.cc b/gr-qtgui/lib/edit_box_msg_impl.cc -index 8713aa820..39546cbf3 100644 ---- a/gr-qtgui/lib/edit_box_msg_impl.cc -+++ b/gr-qtgui/lib/edit_box_msg_impl.cc -@@ -158,7 +158,9 @@ edit_box_msg_impl::edit_box_msg_impl(data_type_t type, - message_port_register_out(d_port); - message_port_register_in(pmt::mp("val")); - -- set_msg_handler(pmt::mp("val"), boost::bind(&edit_box_msg_impl::set_value, this, _1)); -+ set_msg_handler( -+ pmt::mp("val"), -+ boost::bind(&edit_box_msg_impl::set_value, this, boost::placeholders::_1)); - } - - edit_box_msg_impl::~edit_box_msg_impl() -diff --git a/gr-qtgui/lib/freq_sink_c_impl.cc b/gr-qtgui/lib/freq_sink_c_impl.cc -index 3a34df6ec..fe231699f 100644 ---- a/gr-qtgui/lib/freq_sink_c_impl.cc -+++ b/gr-qtgui/lib/freq_sink_c_impl.cc -@@ -82,17 +82,23 @@ freq_sink_c_impl::freq_sink_c_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_c_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_c_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/freq_sink_f_impl.cc b/gr-qtgui/lib/freq_sink_f_impl.cc -index c14bfc31f..7090d8699 100644 ---- a/gr-qtgui/lib/freq_sink_f_impl.cc -+++ b/gr-qtgui/lib/freq_sink_f_impl.cc -@@ -82,17 +82,23 @@ freq_sink_f_impl::freq_sink_f_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_f_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_f_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/histogram_sink_f_impl.cc b/gr-qtgui/lib/histogram_sink_f_impl.cc -index d16de932c..1602d1896 100644 ---- a/gr-qtgui/lib/histogram_sink_f_impl.cc -+++ b/gr-qtgui/lib/histogram_sink_f_impl.cc -@@ -81,8 +81,9 @@ histogram_sink_f_impl::histogram_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&histogram_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&histogram_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (int i = 0; i < d_nconnections + 1; i++) { -diff --git a/gr-qtgui/lib/sink_c_impl.cc b/gr-qtgui/lib/sink_c_impl.cc -index d3feb9d16..73136e789 100644 ---- a/gr-qtgui/lib/sink_c_impl.cc -+++ b/gr-qtgui/lib/sink_c_impl.cc -@@ -96,7 +96,9 @@ sink_c_impl::sink_c_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/sink_f_impl.cc b/gr-qtgui/lib/sink_f_impl.cc -index 418b630b7..d31023a51 100644 ---- a/gr-qtgui/lib/sink_f_impl.cc -+++ b/gr-qtgui/lib/sink_f_impl.cc -@@ -95,7 +95,9 @@ sink_f_impl::sink_f_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/time_raster_sink_b_impl.cc b/gr-qtgui/lib/time_raster_sink_b_impl.cc -index 045c216b0..3aa503ccf 100644 ---- a/gr-qtgui/lib/time_raster_sink_b_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_b_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_b_impl::time_raster_sink_b_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_b_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_b_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_scale = 1.0f; - -diff --git a/gr-qtgui/lib/time_raster_sink_f_impl.cc b/gr-qtgui/lib/time_raster_sink_f_impl.cc -index d186f319d..b3516e5be 100644 ---- a/gr-qtgui/lib/time_raster_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_f_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_f_impl::time_raster_sink_f_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_f_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_f_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_icols = static_cast(ceil(d_cols)); - d_tmpflt = (float*)volk_malloc(d_icols * sizeof(float), volk_get_alignment()); -diff --git a/gr-qtgui/lib/time_sink_c_impl.cc b/gr-qtgui/lib/time_sink_c_impl.cc -index b73a1c1ad..83fbda298 100644 ---- a/gr-qtgui/lib/time_sink_c_impl.cc -+++ b/gr-qtgui/lib/time_sink_c_impl.cc -@@ -80,7 +80,9 @@ time_sink_c_impl::time_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - // +2 for the PDU message buffers - for (unsigned int n = 0; n < d_nconnections + 2; n++) { -diff --git a/gr-qtgui/lib/time_sink_f_impl.cc b/gr-qtgui/lib/time_sink_f_impl.cc -index df13998d7..dd5ed12c8 100644 ---- a/gr-qtgui/lib/time_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_sink_f_impl.cc -@@ -80,7 +80,9 @@ time_sink_f_impl::time_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (unsigned int n = 0; n < d_nconnections + 1; n++) { -diff --git a/gr-qtgui/lib/waterfall_sink_c_impl.cc b/gr-qtgui/lib/waterfall_sink_c_impl.cc -index fcf2ed98b..da38d32ba 100644 ---- a/gr-qtgui/lib/waterfall_sink_c_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_c_impl.cc -@@ -118,19 +118,24 @@ waterfall_sink_c_impl::waterfall_sink_c_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_c_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_c_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_c_impl::~waterfall_sink_c_impl() -diff --git a/gr-qtgui/lib/waterfall_sink_f_impl.cc b/gr-qtgui/lib/waterfall_sink_f_impl.cc -index aa1037a47..d4231a564 100644 ---- a/gr-qtgui/lib/waterfall_sink_f_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_f_impl.cc -@@ -116,19 +116,24 @@ waterfall_sink_f_impl::waterfall_sink_f_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_f_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_f_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_f_impl::~waterfall_sink_f_impl() -diff --git a/gr-uhd/lib/usrp_block_impl.cc b/gr-uhd/lib/usrp_block_impl.cc -index 4f030159f..697d633c1 100644 ---- a/gr-uhd/lib/usrp_block_impl.cc -+++ b/gr-uhd/lib/usrp_block_impl.cc -@@ -137,12 +137,18 @@ usrp_block_impl::usrp_block_impl(const ::uhd::device_addr_t& device_addr, - // Set up message ports: - message_port_register_in(pmt::mp("command")); - set_msg_handler(pmt::mp("command"), -- boost::bind(&usrp_block_impl::msg_handler_command, this, _1)); -+ boost::bind(&usrp_block_impl::msg_handler_command, -+ this, -+ boost::placeholders::_1)); - - // cuz we lazy: --#define REGISTER_CMD_HANDLER(key, _handler) \ -- register_msg_cmd_handler(key, \ -- boost::bind(&usrp_block_impl::_handler, this, _1, _2, _3)) -+#define REGISTER_CMD_HANDLER(key, _handler) \ -+ register_msg_cmd_handler(key, \ -+ boost::bind(&usrp_block_impl::_handler, \ -+ this, \ -+ boost::placeholders::_1, \ -+ boost::placeholders::_2, \ -+ boost::placeholders::_3)) - // Register default command handlers: - REGISTER_CMD_HANDLER(cmd_freq_key(), _cmd_handler_freq); - REGISTER_CMD_HANDLER(cmd_gain_key(), _cmd_handler_gain); -@@ -257,11 +263,12 @@ bool usrp_block_impl::_check_mboard_sensors_locked() - } else if (_dev->get_clock_source(mboard_index) == "mimo") { - sensor_name = "mimo_locked"; - } -- if (not _wait_for_locked_sensor( -- get_mboard_sensor_names(mboard_index), -- sensor_name, -- boost::bind( -- &usrp_block_impl::get_mboard_sensor, this, _1, mboard_index))) { -+ if (not _wait_for_locked_sensor(get_mboard_sensor_names(mboard_index), -+ sensor_name, -+ boost::bind(&usrp_block_impl::get_mboard_sensor, -+ this, -+ boost::placeholders::_1, -+ mboard_index))) { - GR_LOG_WARN( - d_logger, - boost::format( -diff --git a/gr-uhd/lib/usrp_source_impl.cc b/gr-uhd/lib/usrp_source_impl.cc -index a2ff0821b..5e6bd4328 100644 ---- a/gr-uhd/lib/usrp_source_impl.cc -+++ b/gr-uhd/lib/usrp_source_impl.cc -@@ -57,8 +57,9 @@ usrp_source_impl::usrp_source_impl(const ::uhd::device_addr_t& device_addr, - - _samp_rate = this->get_samp_rate(); - _samps_per_packet = 1; -- register_msg_cmd_handler(cmd_tag_key(), -- boost::bind(&usrp_source_impl::_cmd_handler_tag, this, _1)); -+ register_msg_cmd_handler( -+ cmd_tag_key(), -+ boost::bind(&usrp_source_impl::_cmd_handler_tag, this, boost::placeholders::_1)); - } - - usrp_source_impl::~usrp_source_impl() {} -diff --git a/gr-zeromq/lib/pub_msg_sink_impl.cc b/gr-zeromq/lib/pub_msg_sink_impl.cc -index b5da7421e..957cfa411 100644 ---- a/gr-zeromq/lib/pub_msg_sink_impl.cc -+++ b/gr-zeromq/lib/pub_msg_sink_impl.cc -@@ -62,7 +62,9 @@ pub_msg_sink_impl::pub_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&pub_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&pub_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - pub_msg_sink_impl::~pub_msg_sink_impl() -diff --git a/gr-zeromq/lib/push_msg_sink_impl.cc b/gr-zeromq/lib/push_msg_sink_impl.cc -index 4140781ab..7d07d3a30 100644 ---- a/gr-zeromq/lib/push_msg_sink_impl.cc -+++ b/gr-zeromq/lib/push_msg_sink_impl.cc -@@ -62,7 +62,9 @@ push_msg_sink_impl::push_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&push_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&push_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - push_msg_sink_impl::~push_msg_sink_impl() --- -2.26.2 - diff --git a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch b/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch deleted file mode 100644 index 6b8987fa5f..0000000000 --- a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 84dea8284c521f08508bb2dcbc99db3b5d3438fd Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Thu, 27 Aug 2020 17:32:09 +0200 -Subject: [PATCH] gnuradio-runtime_pmt: dont hardcode - INTERFACE_INCLUDE_DIRECTORIES - -gnuradio-runtimeTargets.cmake and gnuradio-pmtTargets.cmake are filled -using CMAKE_INSTALL_PREFIX for INSTALL_INTERFACE. - -Since CMAKE_INSTALL_PREFIX, in buildroot, is set to /usr, these files contains -path to host system. - -With BR2_COMPILER_PARANOID_UNSAFE_PATH package using gnuradio fails with: -arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-isystem' '/usr/include' - -By simply providing 'include', produced .cmake contains: -INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" -instead of -INTERFACE_INCLUDE_DIRECTORIES "/usr/include" - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3737] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gnuradio-runtime/lib/CMakeLists.txt | 2 +- - gnuradio-runtime/lib/pmt/CMakeLists.txt | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gnuradio-runtime/lib/CMakeLists.txt b/gnuradio-runtime/lib/CMakeLists.txt -index 5aa90a5e1..fc32f473b 100644 ---- a/gnuradio-runtime/lib/CMakeLists.txt -+++ b/gnuradio-runtime/lib/CMakeLists.txt -@@ -214,7 +214,7 @@ target_link_libraries(gnuradio-runtime PUBLIC - - target_include_directories(gnuradio-runtime - PUBLIC -- $ -+ $ - $ - $ - PRIVATE -diff --git a/gnuradio-runtime/lib/pmt/CMakeLists.txt b/gnuradio-runtime/lib/pmt/CMakeLists.txt -index 9fb98d0fc..6dfcd945c 100644 ---- a/gnuradio-runtime/lib/pmt/CMakeLists.txt -+++ b/gnuradio-runtime/lib/pmt/CMakeLists.txt -@@ -33,7 +33,7 @@ target_link_libraries(gnuradio-pmt - - target_include_directories(gnuradio-pmt - PUBLIC -- $ -+ $ - $ - PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/ - ) --- -2.26.2 - diff --git a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch b/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch deleted file mode 100644 index 034c10c5cc..0000000000 --- a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 268b1a599304f58bd56c86ff09041b5912c24a0c Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Sun, 1 Nov 2020 17:24:36 +0100 -Subject: [PATCH] gr-qtgui: dont't add examples/c++ subdirectory when gr-analog - is disabled - -gr-qtgui examples needs to have gr-analog enabled, without this dependency -compile crash with: - -In file included from -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.cc:22: -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. -make[3]: *** [gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/build.make:67: -gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/display_qt.cc.o] Error 1 -make[3]: *** Waiting for unfinished jobs.... -In file included from -/somewhere/gnuradio/build/gr-qtgui/examples/c++/moc_display_qt.cpp:10: -/somewhere/gnuradio/build/gr-qtgui/examples/c++/../../../../gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. - -GR_ANALOG is not an explicit dependency of GR_QTGUI, so disable c++ examples if -user has not selected this option. - -[backported from 7470a7a3771dd90defb826b464dfe62977cb1eb6] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-qtgui/CMakeLists.txt | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/gr-qtgui/CMakeLists.txt b/gr-qtgui/CMakeLists.txt -index 8831f3ad9..561186fbd 100644 ---- a/gr-qtgui/CMakeLists.txt -+++ b/gr-qtgui/CMakeLists.txt -@@ -68,7 +68,9 @@ if(ENABLE_GR_QTGUI) - add_subdirectory(include/gnuradio/qtgui) - add_subdirectory(lib) - add_subdirectory(docs) --add_subdirectory(examples/c++) -+if (ENABLE_GR_ANALOG) -+ add_subdirectory(examples/c++) -+endif(ENABLE_GR_ANALOG) - if(ENABLE_PYTHON) - add_subdirectory(swig) - add_subdirectory(python/qtgui) --- -2.26.2 - diff --git a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch b/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch deleted file mode 100644 index 0c282b7322..0000000000 --- a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 2c767bb260a25b415e8c9c4b3ea37280b2127cec Mon Sep 17 00:00:00 2001 -From: japm48 -Date: Fri, 10 Apr 2020 23:35:30 +0200 -Subject: [PATCH] boost: remove deprecated math/common_factor.hpp - -Remove deprecation warning and prefer using std::{lcm,gcd} to Boost. -Fixes #2712. - -[Retrieved from: -https://github.com/gnuradio/gnuradio/commit/2c767bb260a25b415e8c9c4b3ea37280b2127cec] -Signed-off-by: Fabrice Fontaine ---- - .../include/gnuradio/CMakeLists.txt | 1 + - .../include/gnuradio/integer_math.h | 35 +++++++++++++++++++ - gnuradio-runtime/lib/buffer.cc | 19 ++-------- - gr-digital/lib/symbol_sync_cc_impl.cc | 4 +-- - gr-digital/lib/symbol_sync_ff_impl.cc | 4 +-- - 5 files changed, 43 insertions(+), 20 deletions(-) - create mode 100644 gnuradio-runtime/include/gnuradio/integer_math.h - -diff --git a/gnuradio-runtime/include/gnuradio/CMakeLists.txt b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -index 8d718e87b5b..056af5d6f48 100644 ---- a/gnuradio-runtime/include/gnuradio/CMakeLists.txt -+++ b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -@@ -31,6 +31,7 @@ install(FILES - gr_complex.h - hier_block2.h - high_res_timer.h -+ integer_math.h - io_signature.h - logger.h - math.h -diff --git a/gnuradio-runtime/include/gnuradio/integer_math.h b/gnuradio-runtime/include/gnuradio/integer_math.h -new file mode 100644 -index 00000000000..15141049fa4 ---- /dev/null -+++ b/gnuradio-runtime/include/gnuradio/integer_math.h -@@ -0,0 +1,35 @@ -+/* -*- c++ -*- */ -+/* -+ * Copyright 2020 Free Software Foundation, Inc. -+ * -+ * This file is part of GNU Radio -+ * -+ * SPDX-License-Identifier: GPL-3.0-or-later -+ * -+ */ -+#ifndef INCLUDED_GR_INTEGER_MATH_H -+#define INCLUDED_GR_INTEGER_MATH_H -+ -+#if (__cplusplus >= 201703L) -+ -+// Prefer C++17 goodness. -+#include -+#define GR_GCD std::gcd -+#define GR_LCM std::lcm -+ -+#elif (BOOST_VERSION >= 105800) -+ -+// Fallback: newer boost API (introduced in Boost 1.58.0). -+#include -+#define GR_GCD boost::integer::gcd -+#define GR_LCM boost::integer::lcm -+ -+#else -+ -+// Last resort: old deprecated boost API. -+#include -+#define GR_GCD boost::math::gcd -+#define GR_LCM boost::math::lcm -+ -+#endif /* __cplusplus >= 201703L */ -+#endif /* INCLUDED_GR_INTEGER_MATH_H */ -diff --git a/gnuradio-runtime/lib/buffer.cc b/gnuradio-runtime/lib/buffer.cc -index 720c72c4ee8..46d704542b1 100644 ---- a/gnuradio-runtime/lib/buffer.cc -+++ b/gnuradio-runtime/lib/buffer.cc -@@ -13,22 +13,13 @@ - #endif - #include "vmcircbuf.h" - #include -+#include - #include - #include - #include - #include - #include - --// the following header is deprecated as of Boost 1.66.0, and the --// other API was introduced in Boost 1.58.0. Since we still support --// Boost back to 1.54.0, use the older API if pre-1.5.80 and otherwise --// use the newer API. --#if (BOOST_VERSION < 105800) --#include --#else --#include --#endif -- - namespace gr { - - static long s_buffer_count = 0; // counts for debugging storage mgmt -@@ -68,13 +59,9 @@ static long s_buffer_reader_count = 0; - * - * type_size * nitems == k * page_size - */ --static long minimum_buffer_items(long type_size, long page_size) -+static inline long minimum_buffer_items(long type_size, long page_size) - { --#if (BOOST_VERSION < 105800) -- return page_size / boost::math::gcd(type_size, page_size); --#else -- return page_size / boost::integer::gcd(type_size, page_size); --#endif -+ return page_size / GR_GCD(type_size, page_size); - } - - -diff --git a/gr-digital/lib/symbol_sync_cc_impl.cc b/gr-digital/lib/symbol_sync_cc_impl.cc -index 55f85e7c6a7..55f162dc727 100644 ---- a/gr-digital/lib/symbol_sync_cc_impl.cc -+++ b/gr-digital/lib/symbol_sync_cc_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_cc_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -95,7 +95,7 @@ symbol_sync_cc_impl::symbol_sync_cc_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_ccf"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - -diff --git a/gr-digital/lib/symbol_sync_ff_impl.cc b/gr-digital/lib/symbol_sync_ff_impl.cc -index d0ec32ab192..1172c1b4f8a 100644 ---- a/gr-digital/lib/symbol_sync_ff_impl.cc -+++ b/gr-digital/lib/symbol_sync_ff_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_ff_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -97,7 +97,7 @@ symbol_sync_ff_impl::symbol_sync_ff_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_fff"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - diff --git a/package/gnuradio/Config.in b/package/gnuradio/Config.in index 103175946c..de19732cfb 100644 --- a/package/gnuradio/Config.in +++ b/package/gnuradio/Config.in @@ -15,19 +15,19 @@ config BR2_PACKAGE_GNURADIO depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-filesystem + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-thread depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # boost-thread select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_ATOMIC select BR2_PACKAGE_BOOST_DATE_TIME - select BR2_PACKAGE_BOOST_FILESYSTEM select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS select BR2_PACKAGE_BOOST_REGEX select BR2_PACKAGE_BOOST_SYSTEM select BR2_PACKAGE_BOOST_THREAD select BR2_PACKAGE_LOG4CPP select BR2_PACKAGE_GMP + select BR2_PACKAGE_SPDLOG select BR2_PACKAGE_VOLK help GNU Radio is a free & open-source software development @@ -81,6 +81,7 @@ config BR2_PACKAGE_GNURADIO_PYTHON depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL # python-numpy select BR2_PACKAGE_BOOST_PYTHON select BR2_PACKAGE_PYTHON_NUMPY # runtime + select BR2_PACKAGE_PYTHON_PYBIND select BR2_PACKAGE_PYTHON_SIX # runtime help Enable python component diff --git a/package/gnuradio/gnuradio.hash b/package/gnuradio/gnuradio.hash index 90343cf385..efa0bb462b 100644 --- a/package/gnuradio/gnuradio.hash +++ b/package/gnuradio/gnuradio.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3e293541a9ac8d78660762bae8b80c0f6195b3494e1c50c01a9fd79cc60bb624 gnuradio-3.8.2.0.tar.gz +sha256 c6b9f59447a842559b00b3a67b4ca1186e9adb8db742b25400507fedc747f2bd gnuradio-3.10.4.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gnuradio/gnuradio.mk b/package/gnuradio/gnuradio.mk index e36dce081c..cc41f1e12b 100644 --- a/package/gnuradio/gnuradio.mk +++ b/package/gnuradio/gnuradio.mk @@ -4,22 +4,19 @@ # ################################################################################ -GNURADIO_VERSION = 3.8.2.0 -GNURADIO_SITE = https://github.com/gnuradio/gnuradio/releases/download/v$(GNURADIO_VERSION) +GNURADIO_VERSION = 3.10.4.0 +GNURADIO_SITE = $(call github,gnuradio,gnuradio,v$(GNURADIO_VERSION)) GNURADIO_LICENSE = GPL-3.0+ GNURADIO_LICENSE_FILES = COPYING GNURADIO_SUPPORTS_IN_SOURCE_BUILD = NO -# host-python-mako and host-python-six are needed for volk to compile GNURADIO_DEPENDENCIES = \ host-python3 \ - host-python-mako \ - host-python-six \ - host-swig \ boost \ log4cpp \ gmp \ + spdlog \ volk GNURADIO_CONF_OPTS = \ @@ -115,7 +112,8 @@ GNURADIO_CONF_OPTS += -DENABLE_GR_FILTER=OFF endif ifeq ($(BR2_PACKAGE_GNURADIO_PYTHON),y) -GNURADIO_DEPENDENCIES += python3 +GNURADIO_DEPENDENCIES += python3 python-pybind \ + host-python-numpy host-python-packaging GNURADIO_CONF_OPTS += -DENABLE_PYTHON=ON # mandatory to install python modules in site-packages and to use # correct path for python libraries -- 2.30.2 From eero.aaltonen at vaisala.com Wed Oct 19 14:32:19 2022 From: eero.aaltonen at vaisala.com (Eero Aaltonen) Date: Wed, 19 Oct 2022 17:32:19 +0300 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package Message-ID: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Add docopt.cpp library that can be used to create intuitive command line interfaces with very little code by describing the valid calls using the (POSIX.1-2017) command line utility argument syntax. Signed-off-by: Eero Aaltonen --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/docopt.cpp/Config.in | 15 +++++++++++++++ package/docopt.cpp/docopt.cpp.hash | 6 ++++++ package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ 5 files changed, 38 insertions(+) create mode 100644 package/docopt.cpp/Config.in create mode 100644 package/docopt.cpp/docopt.cpp.hash create mode 100644 package/docopt.cpp/docopt.cpp.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..8972bab2d1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -777,6 +777,9 @@ F: board/acmesystems/acqua-a5/ F: configs/acmesystems_acqua_a5_256mb_defconfig F: configs/acmesystems_acqua_a5_512mb_defconfig +N: Eero Aaltonen +F: package/docopt.cpp/ + N: Eloi Bail F: package/bayer2rgb-neon/ F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..77f86328ce 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2113,6 +2113,7 @@ endmenu menu "Text and terminal handling" source "package/augeas/Config.in" + source "package/docopt.cpp/Config.in" source "package/enchant/Config.in" source "package/fmt/Config.in" source "package/fstrcmp/Config.in" diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in new file mode 100644 index 0000000000..655a656398 --- /dev/null +++ b/package/docopt.cpp/Config.in @@ -0,0 +1,15 @@ +config BR2_PACKAGE_DOCOPT_CPP + bool "docopt.cpp" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 + help + docopt is a library that lets you define a command line + interface with the utility argument syntax that has been + used by command line utilities for decades (POSIX.1-2017). + From the description, docopt automatically generates a parser + for the command line arguments. + + docopt Command-line interface description language + http://docopt.org/ + + docopt C++ port https://github.com/docopt/docopt.cpp diff --git a/package/docopt.cpp/docopt.cpp.hash b/package/docopt.cpp/docopt.cpp.hash new file mode 100644 index 0000000000..f8a7f8d97b --- /dev/null +++ b/package/docopt.cpp/docopt.cpp.hash @@ -0,0 +1,6 @@ +# Locally computed: +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 v0.6.3.tar.gz + +# Hash for license files: +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE-Boost-1.0 +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 LICENSE-MIT diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/docopt.cpp.mk new file mode 100644 index 0000000000..647071243a --- /dev/null +++ b/package/docopt.cpp/docopt.cpp.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# docopt.cpp +# +################################################################################ + +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags +DOCOPT_CPP_INSTALL_STAGING = YES +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT + +$(eval $(cmake-package)) -- 2.25.1 From angelo at amarulasolutions.com Wed Oct 19 14:55:36 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 16:55:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package In-Reply-To: <20221019143219.329504-1-eero.aaltonen@vaisala.com> References: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Message-ID: On Wed, Oct 19, 2022 at 4:33 PM Eero Aaltonen via buildroot < buildroot at buildroot.org> wrote: > Add docopt.cpp library that can be used to create intuitive command > line interfaces with very little code by describing the valid calls > using the (POSIX.1-2017) command line utility argument syntax. > > Signed-off-by: Eero Aaltonen > Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci --- > Good to me. Testing: * check-package * legal-info * compiling from source for an architecture > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/docopt.cpp/Config.in | 15 +++++++++++++++ > package/docopt.cpp/docopt.cpp.hash | 6 ++++++ > package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ > 5 files changed, 38 insertions(+) > create mode 100644 package/docopt.cpp/Config.in > create mode 100644 package/docopt.cpp/docopt.cpp.hash > create mode 100644 package/docopt.cpp/docopt.cpp.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..8972bab2d1 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -777,6 +777,9 @@ F: board/acmesystems/acqua-a5/ > F: configs/acmesystems_acqua_a5_256mb_defconfig > F: configs/acmesystems_acqua_a5_512mb_defconfig > > +N: Eero Aaltonen > +F: package/docopt.cpp/ > + > N: Eloi Bail > F: package/bayer2rgb-neon/ > F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..77f86328ce 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -2113,6 +2113,7 @@ endmenu > > menu "Text and terminal handling" > source "package/augeas/Config.in" > + source "package/docopt.cpp/Config.in" > source "package/enchant/Config.in" > source "package/fmt/Config.in" > source "package/fstrcmp/Config.in" > diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in > new file mode 100644 > index 0000000000..655a656398 > --- /dev/null > +++ b/package/docopt.cpp/Config.in > @@ -0,0 +1,15 @@ > +config BR2_PACKAGE_DOCOPT_CPP > + bool "docopt.cpp" > + depends on BR2_INSTALL_LIBSTDCPP > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 > + help > + docopt is a library that lets you define a command line > + interface with the utility argument syntax that has been > + used by command line utilities for decades (POSIX.1-2017). > + From the description, docopt automatically generates a parser > + for the command line arguments. > + > + docopt Command-line interface description language > + http://docopt.org/ > + > + docopt C++ port https://github.com/docopt/docopt.cpp > diff --git a/package/docopt.cpp/docopt.cpp.hash > b/package/docopt.cpp/docopt.cpp.hash > new file mode 100644 > index 0000000000..f8a7f8d97b > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.hash > @@ -0,0 +1,6 @@ > +# Locally computed: > +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 > v0.6.3.tar.gz > + > +# Hash for license files: > +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 > LICENSE-Boost-1.0 > +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 > LICENSE-MIT > diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/ > docopt.cpp.mk > new file mode 100644 > index 0000000000..647071243a > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.mk > @@ -0,0 +1,13 @@ > > +################################################################################ > +# > +# docopt.cpp > +# > > +################################################################################ > + > +DOCOPT_CPP_VERSION = 0.6.3 > +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz > +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags > +DOCOPT_CPP_INSTALL_STAGING = YES > +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT > + > +$(eval $(cmake-package)) > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 15:18:52 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 17:18:52 +0200 Subject: [Buildroot] [PATCH] package/openvmtools: fix local privilege escalation vulnerability In-Reply-To: References: Message-ID: On Wed, Oct 19, 2022 at 10:45 AM Stefan Agner wrote: > Add a patch for CVE-2022-31676 (local privilege escalation > vulnerability). > It would be nice if you could add a more complete description like this: Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ > > Signed-off-by: Stefan Agner > --- > ...uthorization-on-incoming-guestOps-re.patch | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 > package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > > diff --git > a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > new file mode 100644 > index 0000000000..cae2e82f08 > --- /dev/null > +++ > b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > @@ -0,0 +1,36 @@ > +From 4f5cfc23dd3357bafc8b699dd5c558f000a534c3 Mon Sep 17 00:00:00 2001 > +From: John Wolfe > +Date: Wed, 10 Aug 2022 06:12:02 -0700 > +Subject: [PATCH] Properly check authorization on incoming guestOps > requests > + > +Fix public pipe request checks. Only a SessionRequest type should > +be accepted on the public pipe. > +--- > + open-vm-tools/vgauth/serviceImpl/proto.c | 6 +++++- > + 1 file changed, 5 insertions(+), 1 deletion(-) > + > +diff --git a/open-vm-tools/vgauth/serviceImpl/proto.c > b/open-vm-tools/vgauth/serviceImpl/proto.c > +index dc1dfd7..9e04991 100644 > +--- a/open-vm-tools/vgauth/serviceImpl/proto.c > ++++ b/open-vm-tools/vgauth/serviceImpl/proto.c > +@@ -1,5 +1,5 @@ > + /********************************************************* > +- * Copyright (C) 2011-2016,2019 VMware, Inc. All rights reserved. > ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > it > + * under the terms of the GNU Lesser General Public License as published > +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, > + VGAuthError err; > + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); > + > ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { > ++ return VGAUTH_E_PERMISSION_DENIED; > ++ } > ++ > + switch (req->reqType) { > + /* > + * This comes over the public connection; alwsys let it through. > +-- > +2.6.2 > + > -- > 2.38.0 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From luca.ceresoli at bootlin.com Wed Oct 19 16:15:05 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Wed, 19 Oct 2022 18:15:05 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> References: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> Message-ID: <20221019181505.37f9c2b8@booty> Hi Giulio, On Wed, 19 Oct 2022 15:48:23 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. > > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti Reviewed-by: Luca Ceresoli Thanks! -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From angelo at amarulasolutions.com Wed Oct 19 16:14:37 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 18:14:37 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: <20221002150443.159058-1-robimarko@gmail.com> References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Sun, Oct 2, 2022 at 5:05 PM Robert Marko wrote: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- > Changes in v2: > * Correct license > * Add host-pkgconf to DEPENDENCIES > * Add minimal required kernel config options > --- > package/Config.in | 1 + > package/mdio-tools/Config.in | 9 +++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 33 insertions(+) > create mode 100644 package/mdio-tools/Config.in > create mode 100644 package/mdio-tools/mdio-tools.hash > create mode 100644 package/mdio-tools/mdio-tools.mk > > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..ed41e8bdd4 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -536,6 +536,7 @@ endmenu > source "package/mbpfan/Config.in" > source "package/mdadm/Config.in" > source "package/mdevd/Config.in" > + source "package/mdio-tools/Config.in" > source "package/memtest86/Config.in" > source "package/memtester/Config.in" > source "package/memtool/Config.in" > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..feb1e825ac > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,9 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 I think you miss this here > + select BR2_PACKAGE_LIBMNL > + help > + Low-level debug tools for MDIO devices > diff --git a/package/mdio-tools/mdio-tools.hash > b/package/mdio-tools/mdio-tools.hash > new file mode 100644 > index 0000000000..0111165f27 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 > mdio-tools-1.2.0.tar.gz > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > COPYING > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/ > mdio-tools.mk > new file mode 100644 > index 0000000000..308a23824b > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,20 @@ > > +################################################################################ > +# > +# mdio-tools > +# > > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = > https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0 > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl > + > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) > +endef > + > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 16:16:31 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 18:16:31 +0200 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 1:46 AM Giulio Benetti < giulio.benetti at benettiengineering.com> wrote: > At the moment all APIs folders are copied to target increasing the size of > rootfs of ~190MB. Allow to select which API folders we want to copy to > target to shrink rootfs down. > > Signed-off-by: Giulio Benetti > Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci > --- > Looks good to me, even if I'm not sure how much this will be used. Mono is usually run on beefy hardware where you have plenty of space. It's a nice addition anyway. package/mono/Config.in | 16 ++++++++++++++++ > package/mono/mono.mk | 12 ++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/package/mono/Config.in b/package/mono/Config.in > index 76178bcf9b..8690ee68ef 100644 > --- a/package/mono/Config.in > +++ b/package/mono/Config.in > @@ -23,6 +23,22 @@ config BR2_PACKAGE_MONO > > http://download.mono-project.com/sources/mono/ > > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + bool "Specify folders to install to target" > + help > + Allow to specify which Mono folder to install to target > + > +if BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + > +config BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL > + string "Mono folders to install to target" > + help > + Paths to Mono folders to install to target /usr/lib/mono/. > + Only these folders will be copied to the target and not all > + the built ones. You can provide a list of folders separated by > + by spaces. > + > +endif > comment "mono needs a toolchain w/ C++, NPTL, dynamic library" > depends on BR2_PACKAGE_MONO_ARCH_SUPPORTS > depends on !BR2_INSTALL_LIBSTDCPP || \ > diff --git a/package/mono/mono.mk b/package/mono/mono.mk > index 219effc5d3..8036d23205 100644 > --- a/package/mono/mono.mk > +++ b/package/mono/mono.mk > @@ -30,10 +30,22 @@ MONO_CONF_OPTS = $(MONO_COMMON_CONF_OPTS) > --disable-mcs-build > > # The libraries have been built by the host-mono build. Since they are > # architecture-independent, we simply copy them to the target. > +ifeq ($(BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL),y) > +# Copy only selected folders > +define MONO_INSTALL_LIBS > + mkdir -p $(TARGET_DIR)/usr/lib/mono > + (for dir in $(call qstrip,$(BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL)); > do \ > + rsync -av --exclude=*.so --exclude=*.mdb \ > + $(HOST_DIR)/lib/mono/$${dir} $(TARGET_DIR)/usr/lib/mono; \ > + done) > +endef > +else > +# Copy all folders > define MONO_INSTALL_LIBS > rsync -av --exclude=*.so --exclude=*.mdb \ > $(HOST_DIR)/lib/mono $(TARGET_DIR)/usr/lib/ > endef > +endif > > MONO_POST_INSTALL_TARGET_HOOKS += MONO_INSTALL_LIBS > > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From nhed+buildroot at starry.com Wed Oct 19 17:51:51 2022 From: nhed+buildroot at starry.com (Nevo Hed) Date: Wed, 19 Oct 2022 13:51:51 -0400 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance Message-ID: <20221019175151.1030079-1-nhed+buildroot@starry.com> Noticed a significant slowdown with rise of number of external trees in our env. This slowdown seemed to be related to invocations if the percent_defconfig function (GNU Make 4.3). While I have not do a deep dive in analyzing the performance issue, it felt like redefining the %_defconfig rule N times impact performance. This patch makes %_defconfig a single rule which combines uses the first return of a wildcard expression. Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external trees: #Trees Before After 1 0.38 0.37 2 0.32 0.31 3 0.31 0.33 4 0.36 0.32 5 0.45 0.35 6 1.26 0.36 7 9.10 0.36 8 85.93 0.42 Signed-off-by: Nevo Hed --- Makefile | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/Makefile b/Makefile index ec7c034ac1..a8298dd5fd 100644 --- a/Makefile +++ b/Makefile @@ -1010,13 +1010,12 @@ oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmake defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN) -define percent_defconfig -# Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig -%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig outputmakefile - @$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \ - $$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN) -endef -$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep))) +%_defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile + @defconfig=$(firstword $(foreach d,\ + $(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(wildcard $(d)/configs/$@))); \ + if [ -z "$${defconfig}" ]; then echo "Can't find $@" >&2; exit 1; fi; \ + $(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$${defconfig} \ + $< --defconfig=$${defconfig} $(CONFIG_CONFIG_IN) update-defconfig: savedefconfig -- 2.37.3 From fontaine.fabrice at gmail.com Wed Oct 19 18:23:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 20:23:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/imagemagick: security bump to version 7.1.0-51 Message-ID: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> Fix CVE-2022-3213: A heap buffer overflow issue was found in ImageMagick. When an application processes a malformed TIFF file, it could lead to undefined behavior or a crash causing a denial of service. https://github.com/ImageMagick/Website/blob/main/ChangeLog.md Signed-off-by: Fabrice Fontaine --- package/imagemagick/imagemagick.hash | 2 +- package/imagemagick/imagemagick.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/imagemagick/imagemagick.hash b/package/imagemagick/imagemagick.hash index ff0f3e26c6..8988dad5da 100644 --- a/package/imagemagick/imagemagick.hash +++ b/package/imagemagick/imagemagick.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3df6ca6dff15a4e8a20b4593c60285a59e38890440494d91a344e5c0e2bb3eec imagemagick-7.1.0-45.tar.gz +sha256 4333ef2fe63f2510988af82b726f5b1919ebd54037ea6674566c69fcceb67e11 imagemagick-7.1.0-51.tar.gz sha256 8cceeb67d4e783cb63075c7311fdb990fa0369ee80fbd0f481064cd02386ca2d LICENSE diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk index 893606ff01..6bdf24c1e8 100644 --- a/package/imagemagick/imagemagick.mk +++ b/package/imagemagick/imagemagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMAGEMAGICK_VERSION = 7.1.0-45 +IMAGEMAGICK_VERSION = 7.1.0-51 IMAGEMAGICK_SITE = $(call github,ImageMagick,ImageMagick,$(IMAGEMAGICK_VERSION)) IMAGEMAGICK_LICENSE = Apache-2.0 IMAGEMAGICK_LICENSE_FILES = LICENSE -- 2.35.1 From yann.morin.1998 at free.fr Wed Oct 19 18:25:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 20:25:21 +0200 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance In-Reply-To: <20221019175151.1030079-1-nhed+buildroot@starry.com> References: <20221019175151.1030079-1-nhed+buildroot@starry.com> Message-ID: <20221019182521.GF3666@scaer> Nevo, All, On 2022-10-19 13:51 -0400, Nevo Hed spake thusly: > Noticed a significant slowdown with rise of number of external trees > in our env. This slowdown seemed to be related to invocations if the > percent_defconfig function (GNU Make 4.3). We already have a pending patch to address this issue: https://patchwork.ozlabs.org/project/buildroot/patch/20220920194645.670432-1-yann.morin.1998 at free.fr/ > While I have not do a deep dive in analyzing the performance issue, it > felt like redefining the %_defconfig rule N times impact performance. Please, no first-person sentences in commit log (i.e., no "I"). > This patch makes %_defconfig a single rule which combines uses the > first return of a wildcard expression. I can certainly see that this looks a bit simpler than my proposal. Hoever, I am not too fond of it, because it defers the test that the defconfig exists into the shell rather than the Makefile. I don't know, maybe it is in fact better because we can print a more user-friendly error message... > Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external > trees: > > #Trees Before After > 1 0.38 0.37 > 2 0.32 0.31 > 3 0.31 0.33 > 4 0.36 0.32 > 5 0.45 0.35 > 6 1.26 0.36 > 7 9.10 0.36 > 8 85.93 0.42 Weird. For me, starting at 6 external trees, the time to completion directly exploded above the hour. One interesting point, though is that the duration does not seem to be much impacted by the number of br?external trees. Could you test with up to 1000 trees, like I did? Regards, Yann E. MORIN. > Signed-off-by: Nevo Hed > --- > Makefile | 13 ++++++------- > 1 file changed, 6 insertions(+), 7 deletions(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..a8298dd5fd 100644 > --- a/Makefile > +++ b/Makefile > @@ -1010,13 +1010,12 @@ oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmake > defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile > @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN) > > -define percent_defconfig > -# Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig > -%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig outputmakefile > - @$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \ > - $$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN) > -endef > -$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep))) > +%_defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile > + @defconfig=$(firstword $(foreach d,\ > + $(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(wildcard $(d)/configs/$@))); \ > + if [ -z "$${defconfig}" ]; then echo "Can't find $@" >&2; exit 1; fi; \ > + $(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$${defconfig} \ > + $< --defconfig=$${defconfig} $(CONFIG_CONFIG_IN) > > update-defconfig: savedefconfig > > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Wed Oct 19 19:46:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 13:46:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-setuptools: bump to version 65.5.0 Message-ID: <20221019194613.145290-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-setuptools/python-setuptools.hash | 4 ++-- package/python-setuptools/python-setuptools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-setuptools/python-setuptools.hash b/package/python-setuptools/python-setuptools.hash index 3f68084068..2592fc201c 100644 --- a/package/python-setuptools/python-setuptools.hash +++ b/package/python-setuptools/python-setuptools.hash @@ -1,4 +1,4 @@ # From https://pypi.org/pypi/setuptools/json -md5 66c6b8819c5306c12c38d7fad41b7f99 setuptools-65.3.0.tar.gz -sha256 7732871f4f7fa58fb6bdcaeadb0161b2bd046c85905dbaa066bdcbcc81953b57 setuptools-65.3.0.tar.gz +md5 9018a18990e7c16159ec3972affba76c setuptools-65.5.0.tar.gz +sha256 512e5536220e38146176efb833d4a62aa726b7bbff82cfbc8ba9eaa3996e0b17 setuptools-65.5.0.tar.gz sha256 db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8 LICENSE diff --git a/package/python-setuptools/python-setuptools.mk b/package/python-setuptools/python-setuptools.mk index b7483c6347..9dc0a6a38b 100644 --- a/package/python-setuptools/python-setuptools.mk +++ b/package/python-setuptools/python-setuptools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_SETUPTOOLS_VERSION = 65.3.0 +PYTHON_SETUPTOOLS_VERSION = 65.5.0 PYTHON_SETUPTOOLS_SOURCE = setuptools-$(PYTHON_SETUPTOOLS_VERSION).tar.gz -PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/cc/83/7ea9d9b3a6ff3225aca2fce5e4df373bee7e0a74c539711a4fbfda53374f +PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/c5/41/247814d8b7a044717164c74080725a6c8f3d2b5fc82b34bd825b617df663 PYTHON_SETUPTOOLS_LICENSE = MIT PYTHON_SETUPTOOLS_LICENSE_FILES = LICENSE PYTHON_SETUPTOOLS_CPE_ID_VENDOR = python -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 19 19:55:19 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 21:55:19 +0200 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 Message-ID: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Fixes: http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ Signed-off-by: Giulio Benetti --- package/libnss/libnss.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 041b2cfc56..a613006f70 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING LIBNSS_CPE_ID_VENDOR = mozilla LIBNSS_CPE_ID_PRODUCT = nss -# Don't parallel build if make version = 4.3 -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) +# Don't parallel build if make version = 4.3 or 4.4 +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) LIBNSS_MAKE = $(MAKE1) else LIBNSS_MAKE = $(MAKE) -- 2.34.1 From fontaine.fabrice at gmail.com Wed Oct 19 20:00:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 22:00:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/poppler: security bump to version 22.10.0 Message-ID: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an integer overflow in the JBIG2 decoder (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a specially crafted PDF file or JBIG2 image could lead to a crash or the execution of arbitrary code. This is similar to the vulnerability described by CVE-2022-38171 in Xpdf. - Drop patch (already in version) https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS Signed-off-by: Fabrice Fontaine --- ...h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch | 27 ------------------- package/poppler/poppler.hash | 2 +- package/poppler/poppler.mk | 2 +- 3 files changed, 2 insertions(+), 29 deletions(-) delete mode 100644 package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch diff --git a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch b/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch deleted file mode 100644 index 40af6a2e00..0000000000 --- a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3ea6bca90d87d3f91556205c4e58ca425c6ac437 Mon Sep 17 00:00:00 2001 -From: Marco Genasci -Date: Sun, 12 Dec 2021 10:23:37 +0100 -Subject: [PATCH] Include setjmp.h when WITH_JPEG=yes and WITH_PNG=no - -[Retrieved from: -https://gitlab.freedesktop.org/poppler/poppler/-/commit/3ea6bca90d87d3f91556205c4e58ca425c6ac437] -Signed-off-by: Fabrice Fontaine ---- - poppler/ImageEmbeddingUtils.cc | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/poppler/ImageEmbeddingUtils.cc b/poppler/ImageEmbeddingUtils.cc -index 5c50f1269..c26b9eb2a 100644 ---- a/poppler/ImageEmbeddingUtils.cc -+++ b/poppler/ImageEmbeddingUtils.cc -@@ -16,6 +16,7 @@ - extern "C" { - # include - } -+# include - #endif - #ifdef ENABLE_LIBPNG - # include --- -GitLab - diff --git a/package/poppler/poppler.hash b/package/poppler/poppler.hash index cf6c537063..93681e04af 100644 --- a/package/poppler/poppler.hash +++ b/package/poppler/poppler.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 acb840c2c1ec07d07e53c57c4b3a1ff3e3ee2d888d44e1e9f2f01aaf16814de7 poppler-21.12.0.tar.xz +sha256 04e40fad924a6de62e63017a6fd4c04696c1f526dedc2ba5ef275cedf646292a poppler-22.10.0.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/poppler/poppler.mk b/package/poppler/poppler.mk index db6da25d39..5524bfc420 100644 --- a/package/poppler/poppler.mk +++ b/package/poppler/poppler.mk @@ -4,7 +4,7 @@ # ################################################################################ -POPPLER_VERSION = 21.12.0 +POPPLER_VERSION = 22.10.0 POPPLER_SOURCE = poppler-$(POPPLER_VERSION).tar.xz POPPLER_SITE = https://poppler.freedesktop.org POPPLER_DEPENDENCIES = fontconfig host-pkgconf -- 2.35.1 From yann.morin.1998 at free.fr Wed Oct 19 20:52:36 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 22:52:36 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> Message-ID: <20221019205236.GG3666@scaer> Simon, All, On 2022-10-19 18:15 +0200, Simon Richter spake thusly: > Use the `cargo vendor` output to generate the vendor configuration. > > Fixes the need to patch the configuration if there are > dependencies that do not come from crates.io. Could you provide a bit more details on how this works? For example, we create a config file with: [source.crates-io] replace-with = "vendored-sources" [source.vendored-sources] directory = "VENDOR" What would a similar config be like when using dependencies not coming from crates.io? Also, can we have a package that uses non-crates.io dependencies, so that we have a test-case to ensure we have no regression? > Signed-off-by: Simon Richter > --- > support/download/cargo-post-process | 11 ++++------- > 1 file changed, 4 insertions(+), 7 deletions(-) > > diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process > index a4a4718a2a..7d6ecdb030 100755 > --- a/support/download/cargo-post-process > +++ b/support/download/cargo-post-process > @@ -22,17 +22,14 @@ post_process_unpack "${base_name}" "${output}" > > # Do the Cargo vendoring > pushd "${base_name}" > /dev/null > -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > > # Create the local .cargo/config with vendor info > mkdir -p .cargo/ > -cat <.cargo/config > -[source.crates-io] > -replace-with = "vendored-sources" > +cargo vendor \ > + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > + --locked VENDOR 2>&1 \ > + | sed -ne '1,/To use vendored sources, add/!p' > .cargo/config This means that vendoring step is then entirely silent, and there is no progress report. Since the download during the vendoring can be quite big, that means a long pause without any feedback to the user that something is going on. Also, if there is a download issue, there is no way to find what happened. Can we keep the vendoring to stdout as it currently is, and re-run it right after, just to generate the config.toml file? I.e. something like: cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR 2>&1 \ |sed -ne '1,/To use vendored sources, add/!p' > .cargo/config I've quickly hacked the existing script to run it twice, and it looks like the second call generates the exact same output, so we should be covered. Finally, unrelated to your change: if the package already has a .cargo/config.toml, then we irremediably override it. Is there something in that file that would otherwise be required to do the build? Can we simply append to the file rather than overwrite it, i.e.: .... >> .cargo/config.toml Note that if we want to change that, this should be a different patch, of course. Regards, Yann E. MORIN. > -[source.vendored-sources] > -directory = "VENDOR" > -EOF > popd > /dev/null > > post_process_repack "$(pwd)" "${base_name}" "${output}" > -- > 2.38.0 > -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Wed Oct 19 21:05:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 23:05:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds In-Reply-To: <20221019085353.8864-1-moritz@h6t.eu> References: <20221019085353.8864-1-moritz@h6t.eu> Message-ID: <20221019210519.GH3666@scaer> Moritz, All, On 2022-10-19 10:53 +0200, Moritz Bitsch via buildroot spake thusly: > From: Moritz Bitsch > > * when not supplying --release to cargo various optimizations get disabled, > resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG > > * Debug symbol generation can be controlled with the RUSTFLAGS variable: > add -g to RUSTFLAGS for debug symbols Two changes, two patches, please. Yes, they are very related, but the second one is a new feature, so should be a separate patch. > Signed-off-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..7ce7867f67 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ > # and should be removed when fixed upstream > # > ifeq ($(NORMALIZED_ARCH),arm) > - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" > + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition > endif > > +ifeq ($(BR2_ENABLE_DEBUG),y) > + PKG_CARGO_RUSTFLAGS += -g > +endif > + > +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) I was about to say that we had the make-comma-list macro for that, and that's too bad I badly named it, because it also introduces a space after the comma, so it is not fitted here... We could tweak it not to introduce the space, but it is also used to create meson lists, and I'm not sure the space is required there or not. If it's not, then we can tweak it (and introduce make-comma-sp-list if needed elsewhere). Meh, forget it... Regards, Yann E. MORIN. > HOST_PKG_CARGO_ENV = \ > $(PKG_COMMON_CARGO_ENV) > > @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS > $$($(2)_CARGO_ENV) \ > cargo build \ > --offline \ > - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > --manifest-path Cargo.toml \ > --locked \ > $$($(2)_CARGO_BUILD_OPTS) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From moritz at h6t.eu Wed Oct 19 21:29:44 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Wed, 19 Oct 2022 23:29:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds In-Reply-To: <20221019210519.GH3666@scaer> References: <20221019085353.8864-1-moritz@h6t.eu> <20221019210519.GH3666@scaer> Message-ID: <38052548-1bbc-ea4e-de3b-88875218b812@h6t.eu> Hi Yann, Am 19.10.22 um 23:05 schrieb Yann E. MORIN: > Moritz, All, > > On 2022-10-19 10:53 +0200, Moritz Bitsch via buildroot spake thusly: >> From: Moritz Bitsch >> >> * when not supplying --release to cargo various optimizations get disabled, >> resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG >> >> * Debug symbol generation can be controlled with the RUSTFLAGS variable: >> add -g to RUSTFLAGS for debug symbols > Two changes, two patches, please. Yes, they are very related, but the > second one is a new feature, so should be a separate patch. Sure, I'm going to split the commit and re submit the patch. Sorry for the noise. Regards, Moritz Bitsch >> Signed-off-by: Moritz Bitsch >> --- >> package/pkg-cargo.mk | 10 ++++++++-- >> 1 file changed, 8 insertions(+), 2 deletions(-) >> >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >> index f7e3f39503..7ce7867f67 100644 >> --- a/package/pkg-cargo.mk >> +++ b/package/pkg-cargo.mk >> @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ >> # and should be removed when fixed upstream >> # >> ifeq ($(NORMALIZED_ARCH),arm) >> - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" >> + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition >> endif >> >> +ifeq ($(BR2_ENABLE_DEBUG),y) >> + PKG_CARGO_RUSTFLAGS += -g >> +endif >> + >> +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) > I was about to say that we had the make-comma-list macro for that, and > that's too bad I badly named it, because it also introduces a space > after the comma, so it is not fitted here... > > We could tweak it not to introduce the space, but it is also used to > create meson lists, and I'm not sure the space is required there or not. > If it's not, then we can tweak it (and introduce make-comma-sp-list if > needed elsewhere). > > Meh, forget it... > > Regards, > Yann E. MORIN. > >> HOST_PKG_CARGO_ENV = \ >> $(PKG_COMMON_CARGO_ENV) >> >> @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS >> $$($(2)_CARGO_ENV) \ >> cargo build \ >> --offline \ >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >> --manifest-path Cargo.toml \ >> --locked \ >> $$($(2)_CARGO_BUILD_OPTS) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Wed Oct 19 21:52:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 23:52:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/acpid: bump to version 2.0.34 Message-ID: <20221019215201.21248-1-fontaine.fabrice@gmail.com> Drop second patch (source code was merged with https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 and moved with https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog Signed-off-by: Fabrice Fontaine --- package/acpid/0002-add-missing-defines.patch | 40 -------------------- package/acpid/acpid.hash | 6 +-- package/acpid/acpid.mk | 2 +- 3 files changed, 4 insertions(+), 44 deletions(-) delete mode 100644 package/acpid/0002-add-missing-defines.patch diff --git a/package/acpid/0002-add-missing-defines.patch b/package/acpid/0002-add-missing-defines.patch deleted file mode 100644 index a85315911f..0000000000 --- a/package/acpid/0002-add-missing-defines.patch +++ /dev/null @@ -1,40 +0,0 @@ -Add missing MSG_CMSG_CLOEXEC - -Unpatched uClibc toolchains, even using the latest 0.9.33.2, do not -have the MSG_CMSG_CLOEXEC definition. Even though the Buildroot -internal toolchain backend has a uClibc patch to provide it, it -doesn't apply to external toolchains. This patch provides the -definition of MSG_CMSG_CLOEXEC. - -Signed-off-by: Thomas Petazzoni - -Index: b/libnetlink.h -=================================================================== ---- a/libnetlink.h -+++ b/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; -Index: b/kacpimon/libnetlink.h -=================================================================== ---- a/kacpimon/libnetlink.h -+++ b/kacpimon/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; diff --git a/package/acpid/acpid.hash b/package/acpid/acpid.hash index d5e5bcc14b..8da0101264 100644 --- a/package/acpid/acpid.hash +++ b/package/acpid/acpid.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/acpid2/files/ -md5 b2f2ca633b30ae893c47981fa4d3b258 acpid-2.0.33.tar.xz -sha1 b3e06c3f2213db8ee1a9024cf372fb30e2fab637 acpid-2.0.33.tar.xz +md5 988c2e3fd5ba0ea4492d3ba7273af295 acpid-2.0.34.tar.xz +sha1 9322112027e4aa5a8d1b97ec64ef1d150ff0f4fc acpid-2.0.34.tar.xz # Locally computed -sha256 0856f71b3eb34a1b663d0a8e6363dfcbc519e63d847330498898658e2972dbe8 acpid-2.0.33.tar.xz +sha256 2d095c8cfcbc847caec746d62cdc8d0bff1ec1bc72ef7c674c721e04da6ab333 acpid-2.0.34.tar.xz sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/acpid/acpid.mk b/package/acpid/acpid.mk index 5d5138baa3..4bd93068ad 100644 --- a/package/acpid/acpid.mk +++ b/package/acpid/acpid.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPID_VERSION = 2.0.33 +ACPID_VERSION = 2.0.34 ACPID_SOURCE = acpid-$(ACPID_VERSION).tar.xz ACPID_SITE = http://downloads.sourceforge.net/project/acpid2 ACPID_LICENSE = GPL-2.0+ -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:42 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:42 -0600 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build Message-ID: <20221019215348.3262192-1-james.hilliard1@gmail.com> This will be needed for the upcoming host-python-hatchling. Signed-off-by: James Hilliard --- package/python-pluggy/python-pluggy.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk index 59382518ed..6dc6f970ea 100644 --- a/package/python-pluggy/python-pluggy.mk +++ b/package/python-pluggy/python-pluggy.mk @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools PYTHON_PLUGGY_LICENSE = MIT PYTHON_PLUGGY_LICENSE_FILES = LICENSE PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm $(eval $(python-package)) +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:43 -0600 Subject: [Buildroot] [PATCH 2/7] package/python-editables: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-editables/python-editables.hash | 5 +++++ package/python-editables/python-editables.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) create mode 100644 package/python-editables/python-editables.hash create mode 100644 package/python-editables/python-editables.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..5784c4bca2 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1378,6 +1378,7 @@ F: package/python-cbor2/ F: package/python-cchardet/ F: package/python-charset-normalizer/ F: package/python-cssselect2/ +F: package/python-editables/ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ diff --git a/package/python-editables/python-editables.hash b/package/python-editables/python-editables.hash new file mode 100644 index 0000000000..3c28c44cc3 --- /dev/null +++ b/package/python-editables/python-editables.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/editables/json +md5 e91709fbb0ef586cb7b785042068ab67 editables-0.3.tar.gz +sha256 167524e377358ed1f1374e61c268f0d7a4bf7dbd046c656f7b410cde16161b1a editables-0.3.tar.gz +# Locally computed sha256 checksums +sha256 c73e08a04e1557fdb49525fb7a579f73bcab84a254910b9350ee56daf143932d LICENSE.txt diff --git a/package/python-editables/python-editables.mk b/package/python-editables/python-editables.mk new file mode 100644 index 0000000000..db67e7a16d --- /dev/null +++ b/package/python-editables/python-editables.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-editables +# +################################################################################ + +PYTHON_EDITABLES_VERSION = 0.3 +PYTHON_EDITABLES_SOURCE = editables-$(PYTHON_EDITABLES_VERSION).tar.gz +PYTHON_EDITABLES_SITE = https://files.pythonhosted.org/packages/01/b0/a2a87db4b6cb8e7d57004b6836faa634e0747e3e39ded126cdbe5a33ba36 +PYTHON_EDITABLES_LICENSE = MIT +PYTHON_EDITABLES_LICENSE_FILES = LICENSE.txt +PYTHON_EDITABLES_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:44 -0600 Subject: [Buildroot] [PATCH 3/7] package/python-pathspec: new packages In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-3-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-pathspec/python-pathspec.hash | 5 +++++ package/python-pathspec/python-pathspec.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) create mode 100644 package/python-pathspec/python-pathspec.hash create mode 100644 package/python-pathspec/python-pathspec.mk diff --git a/DEVELOPERS b/DEVELOPERS index 5784c4bca2..48d2193db6 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1389,6 +1389,7 @@ F: package/python-logstash/ F: package/python-maturin/ F: package/python-multidict/ F: package/python-mypy-extensions/ +F: package/python-pathspec/ F: package/python-pep517/ F: package/python-pycares/ F: package/python-pydyf/ diff --git a/package/python-pathspec/python-pathspec.hash b/package/python-pathspec/python-pathspec.hash new file mode 100644 index 0000000000..91e4fb85b7 --- /dev/null +++ b/package/python-pathspec/python-pathspec.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/pathspec/json +md5 6f4fde5e701d328a2846d206edb63aa9 pathspec-0.10.1.tar.gz +sha256 7ace6161b621d31e7902eb6b5ae148d12cfd23f4a249b9ffb6b9fee12084323d pathspec-0.10.1.tar.gz +# Locally computed sha256 checksums +sha256 fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85 LICENSE diff --git a/package/python-pathspec/python-pathspec.mk b/package/python-pathspec/python-pathspec.mk new file mode 100644 index 0000000000..ccb794cce9 --- /dev/null +++ b/package/python-pathspec/python-pathspec.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pathspec +# +################################################################################ + +PYTHON_PATHSPEC_VERSION = 0.10.1 +PYTHON_PATHSPEC_SOURCE = pathspec-$(PYTHON_PATHSPEC_VERSION).tar.gz +PYTHON_PATHSPEC_SITE = https://files.pythonhosted.org/packages/24/9f/a9ae1e6efa11992dba2c4727d94602bd2f6ee5f0dedc29ee2d5d572c20f7 +PYTHON_PATHSPEC_LICENSE = MPL-2.0 +PYTHON_PATHSPEC_LICENSE_FILES = LICENSE +PYTHON_PATHSPEC_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:45 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:45 -0600 Subject: [Buildroot] [PATCH 4/7] package/python-hatchling: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-4-james.hilliard1@gmail.com> This is a new pep517 based build backend. Signed-off-by: James Hilliard --- DEVELOPERS | 1 + .../python-hatchling/python-hatchling.hash | 5 +++++ package/python-hatchling/python-hatchling.mk | 19 +++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 package/python-hatchling/python-hatchling.hash create mode 100644 package/python-hatchling/python-hatchling.mk diff --git a/DEVELOPERS b/DEVELOPERS index 48d2193db6..9e2e7a2b87 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1383,6 +1383,7 @@ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ +F: package/python-hatchling/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatchling/python-hatchling.hash b/package/python-hatchling/python-hatchling.hash new file mode 100644 index 0000000000..41d7be977e --- /dev/null +++ b/package/python-hatchling/python-hatchling.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatchling/json +md5 e06cc65ac646f9b01df5406aa1f97022 hatchling-1.11.1.tar.gz +sha256 9f84361f70cf3a7ab9543b0c3ecc64211ed2ba8a606a71eb6a473c1c9b08e1d0 hatchling-1.11.1.tar.gz +# Locally computed sha256 checksums +sha256 7f143a8127ad4873862d70854b5bd2abd0085aa73e64fd2b08704a3b9f5c07fc LICENSE.txt diff --git a/package/python-hatchling/python-hatchling.mk b/package/python-hatchling/python-hatchling.mk new file mode 100644 index 0000000000..13155a20a4 --- /dev/null +++ b/package/python-hatchling/python-hatchling.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# python-hatchling +# +################################################################################ + +PYTHON_HATCHLING_VERSION = 1.11.1 +PYTHON_HATCHLING_SOURCE = hatchling-$(PYTHON_HATCHLING_VERSION).tar.gz +PYTHON_HATCHLING_SITE = https://files.pythonhosted.org/packages/24/20/3e21d2bc57229822ac9fb9b314d7892c16f829f34a0eb247c55fc11e09a8 +PYTHON_HATCHLING_LICENSE = MIT +PYTHON_HATCHLING_LICENSE_FILES = LICENSE.txt +PYTHON_HATCHLING_SETUP_TYPE = pep517 +HOST_PYTHON_HATCHLING_DEPENDENCIES = \ + host-python-editables \ + host-python-packaging \ + host-python-pathspec \ + host-python-pluggy + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:46 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:46 -0600 Subject: [Buildroot] [PATCH 5/7] package/python-hatch-fancy-pypi-readme: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-5-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + .../python-hatch-fancy-pypi-readme.hash | 5 +++++ .../python-hatch-fancy-pypi-readme.mk | 15 +++++++++++++++ 3 files changed, 21 insertions(+) create mode 100644 package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash create mode 100644 package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk diff --git a/DEVELOPERS b/DEVELOPERS index 9e2e7a2b87..df61582cd4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1384,6 +1384,7 @@ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ +F: package/python-hatch-fancy-pypi-readme/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash new file mode 100644 index 0000000000..1b287072b7 --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_fancy_pypi_readme/json +md5 588776ea8e3608714d4cbba16dffa92b hatch_fancy_pypi_readme-22.8.0.tar.gz +sha256 da91282ca09601c18aded8e378daf8b578c70214866f0971156ee9bb9ce6c26a hatch_fancy_pypi_readme-22.8.0.tar.gz +# Locally computed sha256 checksums +sha256 e69ea57f96e599e617f61af3e85bf326b87e833994709fb5e5908a81197730a2 LICENSE.txt diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk new file mode 100644 index 0000000000..f28721181a --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk @@ -0,0 +1,15 @@ +################################################################################ +# +# python-hatch-fancy-pypi-readme +# +################################################################################ + +PYTHON_HATCH_FANCY_PYPI_README_VERSION = 22.8.0 +PYTHON_HATCH_FANCY_PYPI_README_SOURCE = hatch_fancy_pypi_readme-$(PYTHON_HATCH_FANCY_PYPI_README_VERSION).tar.gz +PYTHON_HATCH_FANCY_PYPI_README_SITE = https://files.pythonhosted.org/packages/4e/ab/9b48589d6e3a2f72cc1e8f5221c28ff28fcdf116dbbd6e9beb946054212d +PYTHON_HATCH_FANCY_PYPI_README_LICENSE = MIT +PYTHON_HATCH_FANCY_PYPI_README_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_FANCY_PYPI_README_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_FANCY_PYPI_README_DEPENDENCIES = host-python-hatchling + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:47 -0600 Subject: [Buildroot] [PATCH 6/7] package/python-hatch-vcs: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-6-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-hatch-vcs/python-hatch-vcs.hash | 5 +++++ package/python-hatch-vcs/python-hatch-vcs.mk | 17 +++++++++++++++++ 3 files changed, 23 insertions(+) create mode 100644 package/python-hatch-vcs/python-hatch-vcs.hash create mode 100644 package/python-hatch-vcs/python-hatch-vcs.mk diff --git a/DEVELOPERS b/DEVELOPERS index df61582cd4..c917cbe12a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1385,6 +1385,7 @@ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ F: package/python-hatch-fancy-pypi-readme/ +F: package/python-hatch-vcs/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-vcs/python-hatch-vcs.hash b/package/python-hatch-vcs/python-hatch-vcs.hash new file mode 100644 index 0000000000..e57eeddd2f --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_vcs/json +md5 e56b6d0c05cfb9b59d493c67f94d6e48 hatch_vcs-0.2.0.tar.gz +sha256 9913d733b34eec9bb0345d0626ca32165a4ad2de15d1ce643c36d09ca908abff hatch_vcs-0.2.0.tar.gz +# Locally computed sha256 checksums +sha256 117aa5006d8475562f04442ab06dd2a4c501af3a77255eae0deef1f0c2499a1a LICENSE.txt diff --git a/package/python-hatch-vcs/python-hatch-vcs.mk b/package/python-hatch-vcs/python-hatch-vcs.mk new file mode 100644 index 0000000000..55c6461751 --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.mk @@ -0,0 +1,17 @@ +################################################################################ +# +# python-hatch-vcs +# +################################################################################ + +PYTHON_HATCH_VCS_VERSION = 0.2.0 +PYTHON_HATCH_VCS_SOURCE = hatch_vcs-$(PYTHON_HATCH_VCS_VERSION).tar.gz +PYTHON_HATCH_VCS_SITE = https://files.pythonhosted.org/packages/ac/13/b3d83564c0cc0f1d45b4ea2a78b87b383a8165797613fedf11f1a7e49b48 +PYTHON_HATCH_VCS_LICENSE = MIT +PYTHON_HATCH_VCS_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_VCS_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_VCS_DEPENDENCIES = \ + host-python-hatchling \ + host-python-setuptools-scm + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:48 -0600 Subject: [Buildroot] [PATCH 7/7] package/python-jsonschema: bump to version 4.16.0 In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-7-james.hilliard1@gmail.com> Migrate to new pep517 based hatchling build system. Signed-off-by: James Hilliard --- package/python-jsonschema/python-jsonschema.hash | 4 ++-- package/python-jsonschema/python-jsonschema.mk | 10 +++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/package/python-jsonschema/python-jsonschema.hash b/package/python-jsonschema/python-jsonschema.hash index a2766f78cc..d4c2759811 100644 --- a/package/python-jsonschema/python-jsonschema.hash +++ b/package/python-jsonschema/python-jsonschema.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/jsonschema/json -md5 c3f7a29c187bf1d038c66a5d5763eab1 jsonschema-4.5.1.tar.gz -sha256 7c6d882619340c3347a1bf7315e147e6d3dae439033ae6383d6acb908c101dfc jsonschema-4.5.1.tar.gz +md5 3bc1f63a74fc61bf2847f22cadb0dfff jsonschema-4.16.0.tar.gz +sha256 165059f076eff6971bae5b742fc029a7b4ef3f9bcf04c14e4776a7605de14b23 jsonschema-4.16.0.tar.gz # Locally computed sha256 checksums sha256 4f92a015a13c4d1a040bef018aa13430b4f1bc73b41b16bb846c346766de7439 COPYING sha256 837402bd25fad9b704265801ca3f92566a98157c1f9a7acd6f446299ba1c305a json/LICENSE diff --git a/package/python-jsonschema/python-jsonschema.mk b/package/python-jsonschema/python-jsonschema.mk index 013a5c1293..68a25aed58 100644 --- a/package/python-jsonschema/python-jsonschema.mk +++ b/package/python-jsonschema/python-jsonschema.mk @@ -4,11 +4,15 @@ # ################################################################################ -PYTHON_JSONSCHEMA_VERSION = 4.5.1 +PYTHON_JSONSCHEMA_VERSION = 4.16.0 PYTHON_JSONSCHEMA_SOURCE = jsonschema-$(PYTHON_JSONSCHEMA_VERSION).tar.gz -PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/9e/62/93a54db0e44c4de57868a7d638d7a8abce113c8bc43a20b10b1109b2a517 -PYTHON_JSONSCHEMA_SETUP_TYPE = setuptools +PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/cf/54/8923ba38b5145f2359d57e5516715392491d674c83f446cd4cd133eeb4d6 +PYTHON_JSONSCHEMA_SETUP_TYPE = pep517 PYTHON_JSONSCHEMA_LICENSE = MIT PYTHON_JSONSCHEMA_LICENSE_FILES = COPYING json/LICENSE +PYTHON_JSONSCHEMA_DEPENDENCIES = \ + host-python-hatchling \ + host-python-hatch-fancy-pypi-readme \ + host-python-hatch-vcs $(eval $(python-package)) -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:39 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:39 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile Message-ID: <20221019215741.2854410-1-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/docker/Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile index f54c31b54a..fd1527b1f9 100644 --- a/support/docker/Dockerfile +++ b/support/docker/Dockerfile @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ mercurial \ openssh-server \ python3 \ + python3-pip \ python3-flake8 \ - python3-nose2 \ python3-pexpect \ python3-pytest \ qemu-system-arm \ @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ apt-get -y autoremove && \ apt-get -y clean +# To be able to run tests in parallel +RUN pip install pytest-parallel + # To be able to generate a toolchain with locales, enable one UTF-8 locale RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ /usr/sbin/locale-gen -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:41 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:41 +0200 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221019215741.2854410-3-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/scripts/generate-gitlab-ci-yml | 2 -- 1 file changed, 2 deletions(-) diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml index aa43aac019..bb4dcbbb22 100755 --- a/support/scripts/generate-gitlab-ci-yml +++ b/support/scripts/generate-gitlab-ci-yml @@ -31,7 +31,6 @@ gen_tests() { defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort) ) @@ -80,7 +79,6 @@ gen_tests() { ;; (*-tests.*) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort \ | grep "^${CI_COMMIT_REF_NAME##*-}") ) -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:40 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:40 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221019215741.2854410-2-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/testing/conf/unittest.cfg | 3 -- support/testing/run-tests | 28 ++++++++++------- support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ 3 files changed, 36 insertions(+), 35 deletions(-) diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg index 4f516fb80a..0dfffcfbda 100644 --- a/support/testing/conf/unittest.cfg +++ b/support/testing/conf/unittest.cfg @@ -1,5 +1,2 @@ -[unittest] -plugins = nose2.plugins.mp - [multiprocess] always-on = True diff --git a/support/testing/run-tests b/support/testing/run-tests index bf40019362..f887bc6715 100755 --- a/support/testing/run-tests +++ b/support/testing/run-tests @@ -4,10 +4,16 @@ import multiprocessing import os import sys -import nose2 +import pytest from infra.basetest import BRConfigTest +class PyTestCollector: + def __init__(self): + self.collected = [] + def pytest_collection_modifyitems(self, items): + for item in items: + self.collected.append(item.nodeid) def main(): parser = argparse.ArgumentParser(description='Run Buildroot tests') @@ -42,12 +48,10 @@ def main(): BRConfigTest.logtofile = False if args.list: - print("List of tests") - nose2.discover(argv=[script_path, - "-s", test_dir, - "-v", - "--collect-only"], - plugins=["nose2.plugins.collect"]) + collect_plugin = PyTestCollector() + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) + for nodeid in collect_plugin.collected: + print(nodeid) return 0 if args.download is None: @@ -106,15 +110,15 @@ def main(): return 1 BRConfigTest.timeout_multiplier = args.timeout_multiplier - nose2_args = ["-v", - "-N", str(args.testcases), - "-s", test_dir, + pytest_args = ["--workers", str(args.testcases), + "--rootdir", test_dir, "-c", os.path.join(test_dir, "conf/unittest.cfg")] if args.testname: - nose2_args += args.testname + pytest_args += args.testname + + pytest.main(pytest_args) - nose2.discover(argv=nose2_args) if __name__ == "__main__": diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py index 692291267e..d2390cccf1 100644 --- a/support/testing/tests/fs/test_iso9660.py +++ b/support/testing/tests/fs/test_iso9660.py @@ -25,7 +25,7 @@ BASIC_CONFIG = \ """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): img = os.path.join(builddir, "images", "rootfs.iso9660") if efi: efi_img = os.path.join(builddir, "images", "OVMF.fd") @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): return exit_code -def test_touch_file(emulator): +def do_test_touch_file(emulator): _, exit_code = emulator.run("touch test") return exit_code @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) self.emulator.stop() - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) -- 2.34.1 From moritz at h6t.eu Wed Oct 19 22:00:17 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:17 +0200 Subject: [Buildroot] [PATCH 0/2] Improve handling of debug builds in cargo packages Message-ID: <20221019220019.8418-1-moritz@h6t.eu> From: Moritz Bitsch Cargo supports two build modes: debug and release, where debug is the default. In debug build mode most optimizations are disabled, resulting in slow runtime. It is also possible to instruct rustc to generate debug symbols independent of build mode, using RUSTFLAGS. Moritz Bitsch (2): package/pkg-cargo.mk: fix handling of runtime debug builds package/pkg-cargo.mk: generate debug symbols when BR2_ENABLE_DEBUG is set package/pkg-cargo.mk | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) -- 2.37.3 From moritz at h6t.eu Wed Oct 19 22:00:18 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:18 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <20221019220019.8418-1-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> Message-ID: <20221019220019.8418-2-moritz@h6t.eu> From: Moritz Bitsch The cargo --release flag is used to create optimized builds, not supplying --release has major performance implications. Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..e0556252fa 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS $$($(2)_CARGO_ENV) \ cargo build \ --offline \ - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ --manifest-path Cargo.toml \ --locked \ $$($(2)_CARGO_BUILD_OPTS) -- 2.37.3 From moritz at h6t.eu Wed Oct 19 22:00:19 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:19 +0200 Subject: [Buildroot] [PATCH 2/2] package/pkg-cargo.mk: generate debug symbols when BR2_ENABLE_DEBUG is set In-Reply-To: <20221019220019.8418-1-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> Message-ID: <20221019220019.8418-3-moritz@h6t.eu> From: Moritz Bitsch Adding -g to RUSTFLAGS enables debug symbol generation in rustc Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index e0556252fa..7ce7867f67 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ # and should be removed when fixed upstream # ifeq ($(NORMALIZED_ARCH),arm) - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition endif +ifeq ($(BR2_ENABLE_DEBUG),y) + PKG_CARGO_RUSTFLAGS += -g +endif + +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) + HOST_PKG_CARGO_ENV = \ $(PKG_COMMON_CARGO_ENV) -- 2.37.3 From nhed+buildroot at starry.com Wed Oct 19 22:11:52 2022 From: nhed+buildroot at starry.com (Nevo Hed) Date: Wed, 19 Oct 2022 18:11:52 -0400 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance In-Reply-To: <20221019182521.GF3666@scaer> References: <20221019175151.1030079-1-nhed+buildroot@starry.com> <20221019182521.GF3666@scaer> Message-ID: Yann, All On Wed, Oct 19, 2022 at 2:25 PM Yann E. MORIN wrote: > > Nevo, All, > > On 2022-10-19 13:51 -0400, Nevo Hed spake thusly: > > Noticed a significant slowdown with rise of number of external trees > > in our env. This slowdown seemed to be related to invocations if the > > percent_defconfig function (GNU Make 4.3). > > We already have a pending patch to address this issue: > https://patchwork.ozlabs.org/project/buildroot/patch/20220920194645.670432-1-yann.morin.1998 at free.fr/ Sorry, I forgot to look in patchwork and just saw that it is still not addressed in master (my actual project uses the 2022.02 tag) > > This patch makes %_defconfig a single rule which combines uses the > > first return of a wildcard expression. > > I can certainly see that this looks a bit simpler than my proposal. > > Hoever, I am not too fond of it, because it defers the test that the > defconfig exists into the shell rather than the Makefile. I don't know, > maybe it is in fact better because we can print a more user-friendly > error message... Agreed on that front - I was even toying using `vpath` but it didn't pan out (probably because I have not used that feature in a long time). > > Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external > > trees: > > > > #Trees Before After > > 1 0.38 0.37 > > 2 0.32 0.31 > > 3 0.31 0.33 > > 4 0.36 0.32 > > 5 0.45 0.35 > > 6 1.26 0.36 > > 7 9.10 0.36 > > 8 85.93 0.42 > > Weird. For me, starting at 6 external trees, the time to completion > directly exploded above the hour. > > One interesting point, though is that the duration does not seem to be > much impacted by the number of br?external trees. Could you test with up > to 1000 trees, like I did? For 1000, I got 15.68 - so the same neighborhood as yours. Maybe deltas in the 6-7 trees might be hardware related (cache sizes, FS types etc - strace-ing the make in the many-trees case is a wild spam storm) Addendum: I originally prepared a cover letter but am not a frequent user of git-send-email and it didn't send. I'll paste it below - please note the option of some implicit rule resets. =========================================================== >From 6a2fa74edf5bd3b254fc7c49ebe465280e8e8902 Mon Sep 17 00:00:00 2001 From: Nevo Hed Date: Wed, 19 Oct 2022 13:32:14 -0400 Subject: [PATCH 0/1] core: Use of percent_defconfig seems to impact performance Noticing serious perforate issues on `make X_defconfig` with growth of number of external trees. At 7 trees it is somewhat tolerable but at 8 trees we have seen it take 80-110 seconds. Numbers for before and after the change in commit itself. I do not know for sure what the underlying issue is but looking at some `strace` and `make -d` output it feels like an implosion of implicit rules being evaluated. Adding the resets as suggested here https://lists.gnu.org/archive/html/help-make/2002-11/msg00062.html seems to help a lot but not as much as the attached patch. --8<------------ %: %,v %: RCS/%,v %: RCS/% %: s.% %: SCCS/s.% --8<------------ Inlined below a script to repro this issue, not sure if this functionality should be integrated anywhere or just left in the mailing list. By default the script runs the scenario from 1 tree to 8 trees. Running with param (1-10) will allow a single run with that many trees. --8<------------ #!/usr/bin/env bash declare treedirs=() declare -r cfg="pc_x86_64_bios_defconfig" function setup_dir { for tree in tree{1..10}; do local treedir="defconf_test/${tree}" mkdir -p "${treedir}/configs" touch "${treedir}/Config.in" touch "${treedir}/external.mk" echo -e "name: ${tree^^}\ndesc: ${tree^}" > "${treedir}/external.desc" cp "./configs/${cfg}" "${treedir}/configs/${tree}_${cfg}" treedirs+=( "${treedir}" ) done } function run_one { local count="${1}" local br2_external=$(IFS=':'; echo "${treedirs[*]:0:count}") echo "Defconfig with ${count} trees (BR2_EXTERNAL=\"${br2_external}\")" /usr/bin/time -f "${count},%e" /bin/make BR2_EXTERNAL="${br2_external}" "${cfg}" } # Main setup_dir if [ -n "${1}" ]; then run_one "${1}" else for i in {1..8}; do run_one $i done fi --8<------------ From james.hilliard1 at gmail.com Wed Oct 19 22:12:10 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 18:12:10 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <20221019220019.8418-2-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> Message-ID: On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot wrote: > > From: Moritz Bitsch > > The cargo --release flag is used to create optimized builds, not supplying > --release has major performance implications. Is there an env variable we can use to set this instead? Some packages use cargo without the cargo infrastructure, for example we have a number of pyo3(https://pyo3.rs/) based packages that use the cargo env but not the cargo build commands from here. > > Signed-off-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..e0556252fa 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > $$($(2)_CARGO_ENV) \ > cargo build \ > --offline \ > - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > --manifest-path Cargo.toml \ > --locked \ > $$($(2)_CARGO_BUILD_OPTS) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mmayer at broadcom.com Wed Oct 19 23:34:14 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Wed, 19 Oct 2022 16:34:14 -0700 Subject: [Buildroot] [PATCH] package/rsync: force HAVE_C99_VSNPRINTF to "yes" Message-ID: <20221019233414.868133-1-mmayer@broadcom.com> We know the system will have a modern-enough C library that implements the required snprintf() functionality. Since the configure stage can't detect the system's capabilities (because it is cross-compiling), let's hard-code the decision. As a result, rsync won't be linking in its own copy of snprintf(). Signed-off-by: Markus Mayer --- package/rsync/rsync.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b9819..0d311aa1673c 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -11,6 +11,9 @@ RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba RSYNC_SELINUX_MODULES = rsync RSYNC_DEPENDENCIES = zlib popt +# We know that our C library is modern enough for C99 vsnprintf(). Since +# configure can't detect this, we tell configure that vsnprintf() is safe. +RSYNC_CONF_ENV = rsync_cv_HAVE_C99_VSNPRINTF=yes RSYNC_CONF_OPTS = \ --with-included-zlib=no \ --with-included-popt=no \ -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 23:36:22 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 19:36:22 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> References: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti wrote: > > Fixes: > http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ Hmm, this looks like a bug in the libnss makefile, what was the failure seen with make 4.3 here: https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > Signed-off-by: Giulio Benetti > --- > package/libnss/libnss.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > index 041b2cfc56..a613006f70 100644 > --- a/package/libnss/libnss.mk > +++ b/package/libnss/libnss.mk > @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > LIBNSS_CPE_ID_VENDOR = mozilla > LIBNSS_CPE_ID_PRODUCT = nss > > -# Don't parallel build if make version = 4.3 > -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > +# Don't parallel build if make version = 4.3 or 4.4 > +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > LIBNSS_MAKE = $(MAKE1) > else > LIBNSS_MAKE = $(MAKE) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Wed Oct 19 23:46:55 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 17:46:55 -0600 Subject: [Buildroot] [PATCH 1/1] package/localedef: add MAKEFLAGS fix to localedef as well Message-ID: <20221019234655.1097686-1-james.hilliard1@gmail.com> This was fixed in glibc but also needs to be fixed in localedef. Signed-off-by: James Hilliard --- ...03-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch | 1 + 1 file changed, 1 insertion(+) create mode 120000 package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch diff --git a/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 120000 index 0000000000..1e41bc4e12 --- /dev/null +++ b/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1 @@ +../glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch \ No newline at end of file -- 2.34.1 From james.hilliard1 at gmail.com Thu Oct 20 00:23:08 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 20:23:08 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 7:36 PM James Hilliard wrote: > > On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti > wrote: > > > > Fixes: > > http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ > > Hmm, this looks like a bug in the libnss makefile, what was the failure > seen with make 4.3 here: > https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ This patch also does not fix the build with make 4.4(make from master branch) from my testing. Even without shuffle mode enabled the build appears to always fail. > > > > > Signed-off-by: Giulio Benetti > > --- > > package/libnss/libnss.mk | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > > index 041b2cfc56..a613006f70 100644 > > --- a/package/libnss/libnss.mk > > +++ b/package/libnss/libnss.mk > > @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > > LIBNSS_CPE_ID_VENDOR = mozilla > > LIBNSS_CPE_ID_PRODUCT = nss > > > > -# Don't parallel build if make version = 4.3 > > -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > > +# Don't parallel build if make version = 4.3 or 4.4 > > +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > > LIBNSS_MAKE = $(MAKE1) > > else > > LIBNSS_MAKE = $(MAKE) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Thu Oct 20 05:41:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 20 Oct 2022 05:41:57 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-19 Message-ID: <20221020054203.9477F60C21@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-19 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 2 | 0 | 4 | 2022.08.x | 8 | 11 | 0 | 19 | master | 152 | 358 | 12 | 522 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 23 crun-1.5 | 17 autofs-5.1.8 | 15 glibc-2.36-44-g2628500f5dff... | 15 ocf-linux-20171122 | 14 brltty | 12 host-sentry-cli-1.59.0 | 12 systemd-250.4 | 12 sysvinit-2.99 | 11 host-f2fs-tools-1.15.0 | 10 xz-5.2.7 | 10 linux-6.0.1 | 9 igd2-for-linux-2.1 | 8 batman-adv-2021.4 | 6 btrfs-progs-5.16.2 | 6 casync-4ad9bcb94bc83ff36cfc... | 6 gobject-introspection-1.72.0 | 6 host-binutils-2.38 | 6 linux-pam-1.5.2 | 6 file-5.41 | 5 gerbera-1.10.0 | 5 host-go-1.19.1 | 5 libgpg-error-1.45 | 5 elfutils-0.186 | 4 host-gcc-final-11.3.0 | 4 libcap-ng-0.8.3 | 4 libglib2-2.72.3 | 4 unknown | 4 android-tools-4.2.2+git2013... | 3 dahdi-linux-5c840cf43838e06... | 3 dash-0.5.11.5 | 3 dmalloc-5.6.5 | 3 efivar-38 | 3 gsl-2.6 | 3 host-binutils-2.39 | 3 host-rust-1.64.0 | 3 host-spirv-llvm-translator-... | 3 libarchive-3.6.1 | 3 linux-5.10.145-cip17 | 3 linux-5.10.145-cip17-rt7 | 3 linuxptp-3.1.1 | 3 lxc-4.0.12 | 3 mesa3d-22.1.6 | 3 perl-5.34.1 | 3 fdk-aac-2.0.2 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 host-pahole-73383b3a39afe86... | 2 libgcrypt-1.10.1 | 2 libqb-2.0.6 | 2 mtd-2.1.3 | 2 musl-1.2.3 | 2 ntp-4.2.8p15 | 2 openpgm-5-3-128 | 2 sdl-1.2.15 | 2 skalibs-2.10.0.3 | 2 xenomai-3.0.10 | 2 assimp-5.2.5 | 1 bat-0.19.0 | 1 botan-2.19.2 | 1 brltty-6.5 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 dc3dd-7.2.641 | 1 edk2-edk2-stable202102 | 1 exempi-2.6.1 | 1 ffmpeg-4.4.3 | 1 frr-8.3.1 | 1 fs/axfs/axfs.mk:32: /home/a... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 host-binutils-2.37 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-initial-10.4.0 | 1 hostapd-2.10 | 1 igh-ethercat-1.5.2 | 1 imx-usb-loader-30b43d69770c... | 1 kmod-29 | 1 libglvnd-1.4.0 | 1 libsepol-3.3 | 1 liquid-dsp-1.4.0 | 1 lttng-babeltrace-1.5.7 | 1 numactl-2.0.14 | 1 opencv3-3.4.17 | 1 php-8.1.11 | 1 proftpd-1.3.6e | 1 protobuf-21.6 | 1 python-cryptography-38.0.1 | 1 python-pyqt5-5.15.6 | 1 python-ujson-5.2.0 | 1 qt5webkit-5.212.0-alpha4 | 1 quickjs-2021-03-27 | 1 tcf-agent-1.7.0 | 1 tinymembench-0.4 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 xvisor-0.3.1 | 1 xxhash-0.8.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/4a11b41ac097454ced5bfed4b93c2cf228b818eb | powerpc64 | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/fbaf2814553ac6844b1b12043cef4a8af74741a2 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/e054f275e07698632edb5ef48af7091a685812bb | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/92e113771b5a1b80fe78a07c80a447021e586e0c | ORPH armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/37bd95f169551f49a46c3dc445a3504bfbed2b9f | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d3faeb2dd796ef05b3efca52c806dbeccefde046 | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3d2819a5e9ffc1857f8d9fff0e3615d39d1c65e7 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ff0d22c056159ea51b0fb868be809dec4cfef30f | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2adf4c5061422b8758f9b2f65416a9e0a3f95e53 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9f8e8c7f971714f00aee960a962fe3e72c65ee3f | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/48311a912039de443aea0b2d67dfb0a8b5abff04 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/412781a4c6aabbca0441d52f049ea4acd33dbacb | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5fcf404f270451c11aecf72261e47ca56c8de708 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/36ed9293ef1d4414c80047e14562766dd4775284 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/765d90b6736e5724d387fc530f4dc76c982f7bb8 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e8e252cf5d9cb3e01ad93feab5a09ec53b3e9c85 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/62d6d641934eebb4098ef1c50912f06af552c2f4 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cce473d371fde10d4de3bf77e12bee6972889f6d | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f32f595bba34e8d4023998d5ec91eaf40f342794 | i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/ae07a66c7835d1885266cd38a69ba58a5c09d68f | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/421550c768a4492e01f6c500990f07ccf5490ab9 | arceb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/fa85017d4f0b8b94c155c56d94b4bfa742741ad5 | mips | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2881ecfa1bca5cdc34b3b076cfda2ac36a02cce1 | or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/113c71333b7fb94fefc7112747b73b0c92271825 | xtensa | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/33f70224be5e1a93bdff8fff709dfc927fd775f3 | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b21441e67e2d7d83e9c7b173bb11bbe97ba057fe | mips | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/318956ea8e52e1399553590d8f078c3f79aea824 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/6f0b660645d3e7f4fdd51cb1f90d8f465590419c | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/dfeac5e875a488c8fa22b24aca307d5500774a56 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/13215721fab687b04dbc6702537ebc39f9594805 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/549f38bf8be08161e64f699897d28c3724f1dcdf | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/ee53045533a251b05bdce7afb12c48844e462b11 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/782c47f8fe46ee06e38b198563bc498987b2bade | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/3d01e60acc09b23b779ae33a4049c5cb92b5112d | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d21a867dde6818af074c605c1378df60c6174cba | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/bd1f86ada702f981fcf037fbda8bc4f834184abd | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/8190d672d5a5e269c8c7446c464e9c28c5935503 | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/769889a2d3854253af28e5a185117bb29d42731d | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/2ccce94d44a01ec1eb9b9204b681d6583b96da39 | powerpc64le | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/1e15d17c24934d3b15188f3dbfd168ebc5238f7a | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dd255297533964616abf4b63a48e3fbacae21681 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c5f43bbc69c8d5ec4a8e03f3df734c49be5a34ba | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/662058374cdd5ff8c0f68400bce1675eb0583bdb | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f0c923a9378090891bd6a712b6f9cb245bb3f16c | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/de6bec1f85103725bc2227eb19c62132e98aafa3 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c9e713af5f4b478108cb19ad050c2c5823796f12 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/f7760b2fe8fbadf08cf57924fbbfe42f58b785fb | aarch64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/86c927fb296b7e7a5d63c28124229c85a6d35dd3 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2ec48e270cf1feef4631129bf10c185f7f23a153 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2a342b83e74c286c123b9dc5155ee1fb578719a6 | i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/79c0b77870694fcc0da5cd34e525dd2df2267453 | x86_64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/45b25ad1b6ea71255b8201a7a931849c56147a81 | aarch64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/62694be0ba16d26bdd1b06e9178ad04fb084325d | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/f1988aed0b9cdb8357c1da7b8b9e96a9560e6c0a | ORPH x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4e9158a5cf2e19de0f825ff46b5fa518d8111d71 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/83b94d14883ffa8d4736af40df56b0cb18704256 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/78d500c3c64aac8a6316b3ae2ffd9ff06587d9fd | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e7d5295814745553a36ecc883d0f34b4a01c51bd | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cb31c04e5566f6f2bc944b86b5513e2d0b88098 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e4e8b469554e573463ed37b76a1de81d2f74098b | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05bf95901ef9478b83a10b88e0ab23de4247ea6c | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5e0a55071c2fe4f76aa836c66c3b78f63a91a568 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1786b321e1f0578198938f56bab02f67f09422e1 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bed74dc968b9de8ab3a067b901fb45ee37cad634 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e87d56d3095d33cc55d96190a1e347a09a6b9b6e | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/896fc1a4753bb66b35da45070038b772cc34382b | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eed90ebbb5d02e2d604dd9367b340d1afab2f4a0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a1c31054cd684f440850b84035c0e63168761b16 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1daa77e95bee8b58345bff3eef594a62b7825db7 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9f621cbe2d0c0b523675ad6373abda7be042df09 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/41108fe5135aac33acad80a6ff6a14fd9a5c78b5 | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/6aa9404bb38813f9e6dc81ec1670156ebdda840c | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/17474acdd9c57de7bff5996b525cfbd05c621eab | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/983db8350ee015af9268cd6b5069633f97711519 | powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/18b40d13a2b085560c6f3b74fb1d16ded972bfd5 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e317e562158bbf2fa1f81408dc3bc11737e9d6b8 | ORPH mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/44dbf5da89b0d6e89782ea34a393462b1a2e02af | ORPH or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/75551f61ddb47b3af5f71344dc7d887aee2538e2 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/739ed97487b531c1ee8237479a4d3c99cd570550 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/110a79954de26ba6f7804c3c8b77995a4d3d78ec | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/c3f91d57612510dc740e347c8a085b6b306d528c | ORPH aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/671f30a2eb0d4a1dcf001308a2f0c1fa98325ef0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/0d3aadfd013c0b13c92390837861d1cc14b62c87 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/55d584ba7a435abdc5f728282815c88de83b6be0 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d1ff546372b268f035e7cf6b0bd3550735d28238 | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/62753da2956ab1c636029572511dc0b1ec62bf2e | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4f4f58e6e4d0fe51d1a884d2310e1b498c1884f6 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/073dd09a2880f4272c78bfb25e57ab1cbad7e072 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/954384bc1586dedaf5aee4fd2b8c705a17259822 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3d6ba6a133b68c117b9dc410a5e20005d4ebb59d | mips64el | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/1bdddb2e1856719234b0d1b6e503c4d78995eb3d | powerpc | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/cfebec63f96ae482ea2229f43d114d9917353941 | arc | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/30f62594d9ddb08804096840b51af457d2dcefd0 | armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/21f180fd5375724a3ff16ed5e53c33713e8578fc | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/0675dc14089e511eab207e3199d00a57ea5c6467 | ORPH xtensa | file-5.41 | NOK | http://autobuild.buildroot.net/results/900f497dafc73eda2e435cb879b45610fcc71ad8 | ORPH mips64el | file-5.41 | NOK | http://autobuild.buildroot.net/results/2dbb592db1b48d96d073349578214e6312a955a6 | ORPH x86_64 | file-5.41 | NOK | http://autobuild.buildroot.net/results/5da673c1f5c3e7eb72afeca622534e4b47dbfcb7 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/5e1644ae3918a38b7c470c435aa24b8be492b812 | mips64el | fs/axfs/axfs.mk:32: /home/a... | NOK | http://autobuild.buildroot.net/results/a7e3a874e1b84f61e6f4700aba385bfff6f93e6b | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/d7d8871d1e94a18f5f99e0650d3e1ae348262fb3 | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/14b96bce717c4e265343c038140c575ada9db58c | microblaze | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/748c863915fc60ad1fa1a77b3b89b3fc3959888c | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/357987b6d31b14648f74d08443abb5819616fb33 | arceb | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/b666fa63795e4649429a24c92d445c409496a419 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/fb30074418663243986f649f2db48c503a4d44bb | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/39116036672cb3dd4373b97a9838f0abf6ee8dec | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/413446b13e8d36965effbc6180e01f16693af032 | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/f19604c8805e17418b3137ca5b25562102d3fcbf | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9f8bc57ec3ba6078c9001148d772d88d58384b2a | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8fa75fa041ad3a8e0d5eab203c2ec54ff3c29b57 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0ac19064e46eb2d2ebccd6155fcde076c0643c02 | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5f3043c2c978e041d5b3a6fb4d5d1fcf05cf0407 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a42ff368863ffa9cd7a750acab91c13fef428b86 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61ba7f22ea7ef8f88a69ca75dd191f076ce1e462 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5815bb03c23c910f6477e3dbfa8afc34c3a0e45e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8543e8a1461baafd3c9e24d5493536649c12c8e6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6d2604467a492da5964a772bfb368bbde1baedd | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a6592a500021e118792af92b193b217eb74ca06 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f11847f3d9009767601da9cb73db888cad99c7ba | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da8ab8c68950f153165a05032fac5f4e2d4938db | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83339736d35d4e833460df9597e9807044f846e1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71da25323c2487142ff845d56641d9e99b03448f | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6174cba06943c6d36173a6e85add6b32358d8261 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdbf5fdf373edbabf98ccd89de0c324c149763c8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2765ab2c6a68abef5db3151ae1450dd88840cbbf | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d721bc46c18b899eec4111ad67b4dcab1edf73a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c8cad096e85f7d16d4773782c6fa5a8cb4202de | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d1e2b48ee68755bb01d5f134c286c7273c54dc2c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/2467bae7c6abbeabc7573150f794315daeb78652 | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/b110b0c7e89589d82f72c0930d2a4de8df49db82 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c7b0ed42ef86f94f9114ff352fe55867b13bf29e | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0eebbcd5519ccc06f167b8ed8b2af12f5487f8b9 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4f02f7e18ac2fca682cc03134c24df115bc519a3 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e0e8fb301d61d91b609a7b79cea0a3e21d683aea | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/55ff2b6832d38b8ab5947d6135ee89b14c7a603c | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/328312053808e3e144af61cea81c64af8aa6e333 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/b08c35feeaea9e28373bcd6c7871449ccc6652f2 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/95ed2eb218d12740fc3b5aaa41a47f6e455e96e2 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/92aa845462606b5fa40e764f7c6b7438e9fe3a69 | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bd6f3c9cf1eb4c6d1b9a2d5340928c6e61852729 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2277d43beef37a3a5beadf8647b62638c8a2a27 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/20006cdd56a49bb5cf5f46ea1f1b0b78d8bb0145 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0abf680303125dee0dcad067f2c4888bb0b8d14b | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c7ade9d4e0f08dea1baffb9469daf9f2c6409a74 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fe3595dc36fa008d120c3118219d8059a7342117 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e9946f1a86860a367364d4b4643efca4a0753f9a | riscv64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/394ade72945f66d3c2932513e976dbc6954eb35b | microblaze | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b9eab680916103372be57b9eb6e568d5e6db8d89 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/bf083c608cafa36ea77588637ad027ea6f272575 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8a80d972453cd9adfd8c42a1fd248c97fc27cef5 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/319a832125df11e26eb432067af929e56feef132 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b587d41eaeece0de0297ea58d46d4f0d9090e40e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/aff2c9f613bca4c6c791d4fcba98f450e3c0bd2f | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c259d2cdb4d362a780068ef5e10c5aa0334a9509 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e2715bfc5dde8cf69a6e825d10ce387a061bf104 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4761230b3a77dc79afb7661edc305dff6aac1e14 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b7abc383ee6614384a6210445a31eb1e016f7247 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/43f53c5b47a09c257eca5b0506a4e346acc7dfe6 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/903d7ce02765a5703543e33037683ddaa4749835 | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/4470a319f3286d6e834af7bcaad8f1fcf91d92b8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a9f4fb42700805938d180f4555450df494547b0 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b3aa3b904d3830b864ae6a74609809bcd60df66c | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f788cf9e11ce848c00034061106db58b0a6d59b1 | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f8faa5357f52a79ef94ac19473be8a3873bd6f6 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/f1f7604b032e8f950b9114ce7de7da91bc285c48 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c3a7bd063bf9d0f6597d111ac5d45486e8ca61ff | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9ba02da2b7ab14cf6b7d761edab21cc60cfd0144 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/857fc94446363aecf96346354ca1aa2f20dc589c | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ca2a6754c224012412ca7d3d22659f69019950d6 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/33eeaf18bad628fd7017f02e961575d83a94d59b | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fa61188d35f41daf7cd9164ceafe4684fe5c08cc | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5095ff0f2d4042fbf50fa2f97b2498534282c646 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/51643b4f0875563af1da8ad16e4235dd910c8b6f | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/3f5aa26c9d17d994dd371a4b298033900f939045 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/e39058b6823795fa16de6487e57b05586ceb2645 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/d51f3405670139a6776f12faef3e872c304b1399 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/01ba7a775400b5fa2a0293a4567d826cb8687aae | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/300c38b60b610cd9e3951f21ddef57151e52bf4a | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bdbce15e30447054494075245f5968d85f2b3d72 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0ed64f6dc430ecd67dc9b0b9b03b450ff32296c6 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9a16e31b1b49ba45fbef1a8a9b0ef6d8c3ee85db | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/900840c239b0d91edc0a95a302709399fcad5031 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9ce2372c5687d39e242f1ac1326adebcf80e5974 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87ba17dc66b50191c1f79fc5c79521e497d5db1b | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bf58ed50d9352efefecb25c2cdd904a876d4328c | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3b634d665ccdc828dfd1a99d7cab08e65ec3c7c | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/477dbf161dee7c3cba225a86035da5cb0f2e4e96 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3576edc8a27d1ce89902dc5e70e4fb92756d7c2d | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2320411ae15e0c27c002e92c84cedd090d22d388 | ORPH armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/6b302d32ec0d377d3c4eaa1c4c25d8a26d241803 | ORPH aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/9812b259abf4e8c0957741ddd16b9ad4bf034b4a | ORPH aarch64 | hostapd-2.10 | NOK | http://autobuild.buildroot.net/results/67f5896a90cd6b3e497f1ba8fc8eeb381ceff499 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c57d1eddd89b5c5d1b23e40130dc96197ece5e7f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/25fd4abb66d762199624c630c4ee1c96123156e2 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7f21cc319fdb43f5393588008c8ccc48e2b41ef4 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/844dde054acdf32a316f76de318160c4e7381215 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9d20a4f9b4885d86e3733517e0a963999ddcd3ff | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8c6c2cae3da4788f3907a928a25d7d9d1bd4044f | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/10f7f642a4202ebb7c542cb97c24e38a713f8c6e | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/32529307a19e94518cec841ffab7af35f6a784ba | mipsel | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/064b61ff692421cf1c206b54c20017c4801ac8ab | or1k | imx-usb-loader-30b43d69770c... | NOK | http://autobuild.buildroot.net/results/ca1f740d844cd8cd1c8999f1447259cb4b02d4ea | ORPH x86_64 | kmod-29 | NOK | http://autobuild.buildroot.net/results/7f4628ce3bb96505c99edfb2d04f99e92638e1cf | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2a62c597130cf382f64cf5f4dce87fd070af152b | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cff2d2ca1156326aa9afa7bd6d943ec5efb9ec84 | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b29ff7ebbf8c12f667096eda9187d7322198990 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/36d2917455f18218648ad5a64b9a67cddeeaf510 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/7512e3f765a24572433db3ebe4aa77419b489eeb | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/14cda905550aefac1cf3199283f18b22eacdfa7a | mips64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/685bd3daed60f0439f34e200c5b2561e5fb70ad9 | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dc696d66b4db52300e4916820ee31ec5ace9dea0 | ORPH armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/89268ef3021c0f760c77ad1c4407523d56aa1771 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4fc9d1d4885c27cada2da5e643640deb6ba317ae | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/76594fcdf4d4245c4e94652d7d3692fa46ab41d4 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c5d2ed1b26a9e1bf11babc81f927120b27b81cbb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c2e91fd8ff80b72f524f2d8fc84a26835dcf530b | mips64 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/fe2042622141305c9b8d7e654080483140a8f9c9 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c3195b011a5e49049ef459ad262ee2002edf2fbe | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/11804108045d1b1f8b8107e1044a283b83bcc7d9 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f395d7f718e69a4971ec5be2775fbc53a0f3590e | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4ace9ef9dd6daa4033ccde29ccb81216104c8042 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5c00a103a5b94e9683c53cf468b77817a1d7c1c9 | ORPH powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9a174459b7fa6ff5c3474251f9891e52f5f125ab | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7c0ee1ef546758a44e92284ccd7ed54ddc0dd441 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/76528c63f0e041eee314329f4ad7d7a21bd25e3c | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c738a370271b098f262e4758e600cb79ddd4e1bb | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2386227b2c59cac4ac0cc7a4f96b1d4160b0419c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4a99989d5b54428286426d2fab846b7214ec067c | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/81944839fb883301d9a89d7e0ce837044867bcc2 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/65de55706c547373c177b4f8f3b11ec72d43c388 | powerpc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c4639c944a054c6b9d4488108478d46fe912a9e | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3dea917cc4d2c064f9478d095f48bcf4c68e539f | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/23cee4db30539cbeb2258d534ac639a179697177 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/085c4cbbcfaf2a218bd90cad377a803617cce557 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ddfd742faccc2d9a8036e0efbb1206deff38a416 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/34197473a31b52725cd50734e8bd74538c475115 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3349b1b993cd6378c7d1679026164b9c43b445f1 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/df7c3e215019154226d804e8489c50279dff8da7 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1ea2c89a3f584ee759623414944bc99bb92d8ff0 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ef2c0c71774beb5938bd0fec2fac5614380aea46 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8bffb177c665599de778be32e301f0dc0b63016f | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5bd00c22dcfea959f23406b30fb0be400619866d | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/757a6f14306badafb453cc3780fe062586c2b1e6 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/33e0c151d8ce99b5bc0ee4111ffdefa8e2dca300 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7aff30ab3d72b594117c300144faf673f8386de7 | m68k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/832012b1dfb6d64a03e58571645700b78a533627 | mips64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/1d5af2b455faa56677261096f43ed06c7ebdeac2 | mips64el | libsepol-3.3 | NOK | http://autobuild.buildroot.net/results/e956588c5a7723ca94bc8bb72776af4f1d1b0363 | x86_64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/207dc8976deae08cfbf0108f59d49a222bc60005 | ORPH arc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/4301733f400bd136268fa4320e905cbc7103147c | ORPH riscv32 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/402a1680c21690a653d07b92445549590211d1f4 | ORPH sh4a | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/912dc3eab87132bddd72f9a4703f6ae28f2a145a | ORPH arm | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/23ae7a94f35f4940e6893afcf3aa915d35841dc7 | ORPH aarch64_be | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3e3fdd346d5d9918684f4ff43a92ddc92eb78d5b | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/70ff43d39f88c50e937112701055e4b520fd5ed5 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7a4dd5a180323d8ae18d749d28ba2b96473ea986 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bb1cba858db7d9bd557635f4634991b2d149e59e | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d96fc8fbbb444cfd6c0ad9ca2c291f37c16e78ef | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/48bed0d207a328e58ac797aebce1c47cc747b930 | ORPH i586 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/14f65003074ccde76c9185be9e11363e95ba6e3d | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/31a843f18832a0daf10a0c0b5077520774e72730 | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a1b9b7b5709bbadb64277e13c0b406a94f77286c | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/5a5d0ab12796038e1833212cccae6274c974bf8f | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/a57ca0f45556a05d1384e6e18d925128401f66a6 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/032e9a2d69f3286948755e6edf92429ae5c75688 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b0919104f9346185d97ab998d4518c1ccaabf6be | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b78c76d671cd1eb71fd6a21603d8b3f1c4f250a7 | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/c6b46073a4ec0419e2e2e9b0f5877a4ba4645118 | ORPH sh4 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/bb01a5f7faea8ac375031bf7d221c00df76c3e01 | ORPH mips | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/11b969aa97dc06ec7932a4a79f00c6721e9356b8 | aarch64_be | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/61d6835372ce12932e0215d24d237846e8b86655 | aarch64_be | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/94f3f6f798a501668944d77412ee3e98a15cf1b6 | arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/cb6f9192e7acc08d51cfcc6641e57e9a79a7d8c5 | mips64 | lttng-babeltrace-1.5.7 | NOK | http://autobuild.buildroot.net/results/dbd68ce26423f4ff0a56f8075664bbc8ce9b5534 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/420dff9e081be3f46c0cf971b0f1359bd4467448 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/8bbed37e1443ebc48d814ead4b15bbc1b2dac500 | arm | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b52205898dcad4ab5717a6dbe57c9d356b33518a | sh4 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/3dd22b1deba18939e8817423a541190889b1b0fe | or1k | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/76050d07a4989400d4a6cefc8b0b59c767b01450 | sparc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/ff98389a47aa06e2740afd8eeb5f2ac17ee8670c | armeb | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/e60f8a11db830f77135dc9433ed15f8dc212590a | i686 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/b3ac995e7a6535eb227ff99d226eec74d943f6c5 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/29c4158361ae65738aa23e33448dcab67401213c | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/e011ef6cebadec443b2b4425ca65be04907c6c59 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c0100d4171bed8f2546c951a808b5271d3f904a0 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/6d9f97ed138378d6338a5710cd24cc19299ad860 | ORPH or1k | numactl-2.0.14 | NOK | http://autobuild.buildroot.net/results/05a36b46fe0d9befc99714cd60a29d2affd3c271 | mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/9c35d0e92d9b7afe383f7c997948b722fba5de37 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/06ec0e688e4894bb213f4bb22f532ab7dd0b06f9 | ORPH powerpc64le | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/55c279534853bbd5319e003742e3865ff8663c14 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6184133576407e91aed6a1ece107dba1ad9d07b5 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/463e20a20ea3613580db6046f45760ce4c26785f | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6a72a8c689a11f915e2f96ddf8165b209769b729 | ORPH x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e392fd20e2875b60427139ce8464c5963ca55cfa | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6b8e0736416bb38f045465b47680f2666d759060 | ORPH aarch64_be | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5b0083b2dd7ad6a2bf6f4351ecb0b6c489014f56 | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ccbef6f5a077e89c9ddb19fa84d775bc2ddf29ae | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/cb2dffbe25ab4fa20650c0582b64e4eeb34c013c | ORPH nios2 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6e0b7a838884d1c73073966ae89f92a3a2bae5c5 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f0d2702be334c37083ac523c48c33ea56923da6e | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/b9e25f7fa363ea4d338a62f7616158a324a163f1 | ORPH riscv32 | opencv3-3.4.17 | NOK | http://autobuild.buildroot.net/results/e6b02cbb847ad0e0e75cf1aac410ef9d951ee39a | powerpc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/46b7723fce29938cdf656c011b24e11adf032d07 | arc | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/ec0f86e8666ed49ad6b91427c6e05d75dc248028 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/6bc47cb51024d3644cf03a640248a37618c47f16 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/b734d395caeec5be10a57217db196f35a55e2057 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/fd0587ef3340193d7f5d2ab2a8ff59dbe48b018f | microblaze | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/e7399ff7296ca898f7d1c5a7e8eef45af02e7afd | m68k | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/a5b7dfc739e4b28cfdae15734f4d2c10a995c260 | m68k | protobuf-21.6 | NOK | http://autobuild.buildroot.net/results/755d9df18af870d26bf398b22c6f75e525a4b9d9 | mipsel | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/c7ff8dc92f7aeb0c7f72c3279020059657500d2c | mipsel | python-pyqt5-5.15.6 | NOK | http://autobuild.buildroot.net/results/d9cac2df4e4ea06d74a1e858efec8c68c23cd81b | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/8c8d50bfc15c6045fa459a86860a372a81bcb864 | arc | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/d4f4d23c586ed69c7ebc96ce717d0d4c6d429933 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/5b320e76528ac0b5d76c6950d9d370fc531dee3a | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/35d9e72e4ec3ce9ddccc8bee9f372040540ccf7c | ORPH sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/f6dfea186c830c04b87466cb6e86fdf72b9fda7d | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/cc48c402acb0cb20965dde7e36bc686bf13b8296 | or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/e44a7d66dbd22732269a74d18c783b4b6160d348 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/903c64b78b24ce5cd56b439a7e4faa7c78e09b7d | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5c13df2abb5117373156315dc8307e03ccf38495 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/942e961f2848bc26215c99d4979d33cbe7a41b51 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c2269164d5e9fcf9d34356fc3e394a105771d45a | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f6dbde29a50cebed497b1338b28851de1bc3e29b | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6ac259fb5662a998246c09ac8d63f651354f4669 | riscv64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1e06684254d0072c6684460a398a54de899777bf | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d387c9a2eadc4f568c156351629606743ae3a9cc | arc | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/66f337c1ec7c06eb786f4c68286d98a77e22c5c1 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/712c2b789bfc1e4002868cfeed11c2306e38207e | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8a8c44258c482ec6fd295c5ff86cc41095d7ef98 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a29c6ae512a13b1d628011ef54fc93c77f4e1d5e | sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/76b9c8d4110bce29df5de58a5ef8946fd61ad3e0 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2f7e6d9cd28ca9fb955442cc92e2227513f7dead | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d0c9980345be2df048cb2a06c990746fdd1bc85 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fea204d2bdec217f845913cb5ac70892eb80a01b | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c342951842b7bd0585465bb67c1cd2d235555039 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3650c2360e59d6040275917441167f077b9f6d05 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44cbdcf9c60c4bbebfe3aa49dde18ae43529ea2b | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/10bb774224a7728d11b55b622d18dfa250807f77 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/446bc0cca9335b41ec811cfdcf498aea3b2b515d | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9b72d789a6f8354543ad32581980e8a286922499 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/47bd2072c29cc95c8bd663e0fe352ea5da5d8788 | ORPH microblaze | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/866bf58a6cc13d2ea7b9ca5e3aa23ec2d711ac72 | armeb | tinymembench-0.4 | NOK | http://autobuild.buildroot.net/results/4769b87b4bf98150bfccdbf8300ad3478f7fe634 | mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c456216a2bcc762700b2aa3560b6bdf79a2010e6 | ORPH aarch64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/dcc8f864b025a838337487e51dee7f190692159e | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/eeb289c0606270f7769f435e1c1ee9b3c136bab8 | arm | unknown | NOK | http://autobuild.buildroot.net/results/3ac465887fbff95ff2274040323607e3ef0cfd86 | aarch64_be | unknown | NOK | http://autobuild.buildroot.net/results/b18e34c6f119b99a42a027b7ac6b2bb6cba4cd0e | m68k | unknown | NOK | http://autobuild.buildroot.net/results/77eb9989329355ba3bd8a456f67bedf066c6496d | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/aeb606c9e74d43467562d357592c26eb786302a3 | armeb | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/df2bbbbe7dadbb40b04064464d7436e6ab092d3c | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/a7b6ba51a73385015592ed3d35b7dcb3de186e7b | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/7c955e9fa5493228632d63474945618568603bb2 | aarch64_be | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/0c986f3e755dcdaa616ec12ebd7265cc74922c09 | mips | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/a155b33dd7845890a8a96b0fe84b65d8274b9762 | aarch64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/9bf99ff1f91f1852c34be32fe056dc259024d109 | s390x | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/5dc510c6d3588db0db604517a5881ac7565fa249 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/3cf2e4cd06ff07747f82d76415350c443cbc2090 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6e4689e491502aa0c99d7b75d54292a2d511235b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4fe01bc6379bef710308205196c33284fee99073 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bc1fad293e53af8a5518d0583d031347256d63ba | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4aef168dd2ccdefced0c752c16b0ec74d54ac707 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/58b3e9687dbae9dff00b7d6ee20d64fc21da0ce0 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/18f141befaf054261488328491a82e3ed8b79437 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7366bde38545f53d22641cc25902c58695360a91 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0d8a23e5ebada15750e47f2f0d8a6b4d03fa3d1f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c25a0b48de43b341bf36dbda27198a584438e370 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/717e5a44238d9495468f9862b9368489482135fa | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 rsync-3.2.5 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d81d45617212dda52e12cf246d4759fb42d90a68 | x86_64 | rsync-3.2.5 | NOK | http://autobuild.buildroot.net/results/aa61b0479809c09b981db4a48b28aef5d895fced | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 openssh-legal-info | 2 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 ipmiutil-3.1.8 | 1 ndisc6-1.0.5 | 1 openvmtools-11.3.5-18557794 | 1 package/openssh/openssh.mk:... | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/474193ca12c396f66e392c0f79ec08b42e398202 | powerpc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/07c463064c894b752d2b6bc75f8fbc0602ae645e | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/caf8dd10305e9c6036d7901fb0ebf40ee0d0572e | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dee79943c4d6f6dafb74af23012fa6be3b9d4d42 | i586 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/215feec403a6ec28120c62c95b7a731552e13b97 | arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/42f31eb4285ab9791a6ea4b9f97ab0327e006d5c | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/a908392732e7b95f2d681988ce23626e26720835 | ORPH sparc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/ca64f55666708c8e5d848f3602bc5a9329948bc2 | ORPH aarch64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/0b2e01043aec8b0d736434554b78acd96b845d61 | aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/4baff817e811a2c0b93f28843ad18a3bc5e48f3f | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/e683b8662d1f169d1b6f35380a6fff3663aead2f | -- http://autobuild.buildroot.net From giulio.benetti at benettiengineering.com Thu Oct 20 06:53:40 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 08:53:40 +0200 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: Message-ID: Hi James, > Il giorno 20 ott 2022, alle ore 02:23, James Hilliard ha scritto: > > ?On Wed, Oct 19, 2022 at 7:36 PM James Hilliard > wrote: >> >>> On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti >>> wrote: >>> >>> Fixes: >>> http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ >> >> Hmm, this looks like a bug in the libnss makefile, what was the failure >> seen with make 4.3 here: >> https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > This patch also does not fix the build with make 4.4(make from master branch) > from my testing. > > Even without shuffle mode enabled the build appears to always fail. Thank you for testing, I have forgotten exactly to ask you to do it :-) since almost all the failures comes from your asahi-mini that I remember to have Make 4.4. So I try to reproduce the bug here at me and find out a fix. Thanks again Best regards Giulio > >> >>> >>> Signed-off-by: Giulio Benetti >>> --- >>> package/libnss/libnss.mk | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk >>> index 041b2cfc56..a613006f70 100644 >>> --- a/package/libnss/libnss.mk >>> +++ b/package/libnss/libnss.mk >>> @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING >>> LIBNSS_CPE_ID_VENDOR = mozilla >>> LIBNSS_CPE_ID_PRODUCT = nss >>> >>> -# Don't parallel build if make version = 4.3 >>> -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) >>> +# Don't parallel build if make version = 4.3 or 4.4 >>> +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) >>> LIBNSS_MAKE = $(MAKE1) >>> else >>> LIBNSS_MAKE = $(MAKE) >>> -- >>> 2.34.1 >>> >>> _______________________________________________ >>> buildroot mailing list >>> buildroot at buildroot.org >>> https://lists.buildroot.org/mailman/listinfo/buildroot From angelo at amarulasolutions.com Thu Oct 20 09:18:15 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Thu, 20 Oct 2022 11:18:15 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/qt6: Change license hashes In-Reply-To: <20221013121041.1398841-1-jesseevg@gmail.com> References: <20221013121041.1398841-1-jesseevg@gmail.com> Message-ID: On Thu, Oct 13, 2022 at 2:11 PM Jesse Van Gavere wrote: > There was a major rework of how licenses are used in the Qt codebase > along with a new location for all licenses, so change the hash file to > reflect these changes > > https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 > > Changes for v2: > - Also adjust the makefiles to refer to these new license file names > - Added myself to the developers for the qt6 package for good measure > > Signed-off-by: Jesse Van Gavere > --- > Tested-by: Angelo Compagnucci > DEVELOPERS | 1 + > package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- > package/qt6/qt6base/qt6base.mk | 4 ++-- > package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- > package/qt6/qt6serialport/qt6serialport.mk | 4 ++-- > 5 files changed, 22 insertions(+), 14 deletions(-) > > diff --git a/DEVELOPERS b/DEVELOPERS > index 59121c6a54..6cb8d0fc54 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1478,6 +1478,7 @@ F: package/x11r7/xdriver_xf86-video-imx/ > F: package/x11r7/xdriver_xf86-video-imx-viv/ > > N: Jesse Van Gavere > +F: package/qt6/ > F: package/qt6/qt6serialport/ > > N: Jianhui Zhao > diff --git a/package/qt6/qt6base/qt6base.hash > b/package/qt6/qt6base/qt6base.hash > index 5dd26973fa..b004347a5a 100644 > --- a/package/qt6/qt6base/qt6base.hash > +++ b/package/qt6/qt6base/qt6base.hash > @@ -2,8 +2,13 @@ > sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d > qtbase-everywhere-src-6.4.0.tar.xz > > # Hashes for license files > -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE.GPL2 > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSE.GPL3 > -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 > LICENSE.GPL3-EXCEPT > -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSE.LGPL3 > -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSE.FDL > +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb > LICENSES/Apache-2.0.txt > +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce > LICENSES/BSD-3-Clause.txt > +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 > LICENSES/BSL-1.0.txt > +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSES/GFDL-1.3-no-invariants-only.txt > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSES/GPL-2.0-only.txt > +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSES/GPL-3.0-only.txt > +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSES/LGPL-3.0-only.txt > +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 > LICENSES/LicenseRef-Qt-Commercial.txt > +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc > LICENSES/MIT.txt > +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 > LICENSES/Qt-GPL-exception-1.0.txt > diff --git a/package/qt6/qt6base/qt6base.mk b/package/qt6/qt6base/ > qt6base.mk > index b7ee6037f3..b53d53c653 100644 > --- a/package/qt6/qt6base/qt6base.mk > +++ b/package/qt6/qt6base/qt6base.mk > @@ -7,8 +7,8 @@ > QT6BASE_VERSION = $(QT6_VERSION) > QT6BASE_SITE = $(QT6_SITE) > QT6BASE_SOURCE = > qtbase-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6BASE_VERSION).tar.xz > -QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), > GFDL-1.3 (docs) > -QT6BASE_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT > LICENSE.LGPL3 LICENSE.FDL > +QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), > GFDL-1.3 no invariants (docs) > +QT6BASE_LICENSE_FILES = LICENSES/GPL-2.0-only.txt > LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt > LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt > QT6BASE_DEPENDENCIES = \ > host-ninja \ > host-qt6base \ > diff --git a/package/qt6/qt6serialport/qt6serialport.hash > b/package/qt6/qt6serialport/qt6serialport.hash > index fb1b3dcf6b..887f67b2ae 100644 > --- a/package/qt6/qt6serialport/qt6serialport.hash > +++ b/package/qt6/qt6serialport/qt6serialport.hash > @@ -2,8 +2,10 @@ > sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 > qtserialport-everywhere-src-6.4.0.tar.xz > > # Hashes for license files: > -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE.GPL2 > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSE.GPL3 > -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 > LICENSE.GPL3-EXCEPT > -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSE.LGPL3 > -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d > LICENSE.FDL > +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce > LICENSES/BSD-3-Clause.txt > +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSES/GFDL-1.3-no-invariants-only.txt > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSES/GPL-2.0-only.txt > +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSES/GPL-3.0-only.txt > +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSES/LGPL-3.0-only.txt > +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 > LICENSES/LicenseRef-Qt-Commercial.txt > +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 > LICENSES/Qt-GPL-exception-1.0.txt > diff --git a/package/qt6/qt6serialport/qt6serialport.mk > b/package/qt6/qt6serialport/qt6serialport.mk > index 01763657b8..03197fd60d 100644 > --- a/package/qt6/qt6serialport/qt6serialport.mk > +++ b/package/qt6/qt6serialport/qt6serialport.mk > @@ -9,8 +9,8 @@ QT6SERIALPORT_SITE = $(QT6_SITE) > QT6SERIALPORT_SOURCE = > qtserialport-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALPORT_VERSION).tar.xz > QT6SERIALPORT_INSTALL_STAGING = YES > QT6SERIALPORT_SUPPORTS_IN_SOURCE_BUILD = NO > -QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception > (tools), GFDL-1.3 (docs) > -QT6SERIALPORT_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 > LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL > +QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception > (tools), GFDL-1.3 no invariants (docs) > +QT6SERIALPORT_LICENSE_FILES = LICENSES/GPL-2.0-only.txt > LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt > LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt > QT6SERIALPORT_CONF_OPTS = \ > -GNinja \ > -DQT_HOST_PATH=$(HOST_DIR) \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From bugzilla at busybox.net Thu Oct 20 10:27:23 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:27:23 +0000 Subject: [Buildroot] [Bug 15071] New: RTL8723BS library is outdated Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 Bug ID: 15071 Summary: RTL8723BS library is outdated Product: buildroot Version: 2022.02.6 Hardware: Other OS: Linux Status: NEW Severity: normal Priority: P5 Component: Outdated package Assignee: unassigned at buildroot.uclibc.org Reporter: alirezatm at ymail.com CC: buildroot at uclibc.org Target Milestone: --- Good day, It seems that the RTL8723BS library in the buildroot settings accessible by "make menuconfig" and "make linux-menunconfig" is outdated and hasn't been updated for a long time In the "~/buildroot-2022.02.6/package/rtl8723bs/rtl8723bs.mk" file, I saw this line: RTL8723BS_SITE = $(call github,hadess,rtl8723bs,$(RTL8723BS_VERSION)) which means that it's fetching the library from https://github.com/hadess/rtl8723bs which as you can see is not being updated anymore and is extremely outdated. For example it doesn't respect the changes to the timer done in the 4.15 kernel I tried lowering my linux kernel version in the "make menuconfig" settings as a compromise but this library still won't compile. Tried and failed with kernel versions 4.11, 4.12 and 4.14 The kernel itself seems to have an up-to-date driver for it (https://github.com/torvalds/linux/tree/master/drivers/staging/rtl8723bs) but I don't think we can access it via buildroot Is there any chance to fix this library? Thanks I've attached my .config file if it helps -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 10:30:41 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:30:41 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 alirezatm at ymail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|normal |major --- Comment #1 from alirezatm at ymail.com --- Sorry, seems that this website has a 75kB limit, so I've uploaded my .config file here: https://anonymfile.com/pZKO/.config -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 10:57:38 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:57:38 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 --- Comment #2 from Giulio Benetti --- (In reply to alirezatm from comment #0) Hi, it's true, package rtl8723bs is outdated and indeed has been dropped with this commit: https://git.busybox.net/buildroot/commit/?id=7763ba7007172ceb5e928ae5902735d727aaa90d As pointed by: https://github.com/hadess/rtl8723bs/commit/3bb1d33ad98c1d77b5e17a1b707e137b35e6d0a5 now the driver has made it into staging Linux driver folder. So you can access and configure Linux by issuing: $ make linux-menuconfig and then you can find RTL8723BS driver. But take care because it needs some CONFIG_ to be enabled: CONFIG_STAGING=y CONFIG_WLAN=y CONFIG_MMC=y CONFIG_CFG80211=y CONFIG_MODULES=y To find these informations you can search "rtl8723bs" in linux-menuconfig(as well as in Buildroot menuconfig) by typing "/" and there it will be shown the "depends on" and what it "Selects". This way you should be able to have the driver built. Best regards -- You are receiving this mail because: You are on the CC list for the bug. From dumasv.dev at gmail.com Thu Oct 20 11:46:41 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:46:41 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221020114641.481922-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized. This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:50:30 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:50:30 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221020115030.483083-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized. This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:52:39 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:52:39 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: <20221020115239.483333-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..cef7a48e76 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:55:12 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:55:12 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: <20221020115512.483686-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..cef7a48e76 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From john at metanate.com Thu Oct 20 12:15:21 2022 From: john at metanate.com (John Keeping) Date: Thu, 20 Oct 2022 13:15:21 +0100 Subject: [Buildroot] [PATCH v2] package/sbc: add config option to control tools build Message-ID: <20221020121521.2041129-1-john@metanate.com> libsndfile is only needed by the sbctester utility and the library can be built without this dependency. Add a config option to cover not just sbctester but the command-line utilities as well. While the utilities may be useful for debugging, normal usage will only need libsbc and these applications can be omitted. Signed-off-by: John Keeping --- v2: - Fix autocomplete error in select BR2_PACKAGE_LIBSNDFILE package/sbc/Config.in | 8 +++++++- package/sbc/sbc.mk | 9 ++++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/sbc/Config.in b/package/sbc/Config.in index f1dbc0ec2c..565e3e6596 100644 --- a/package/sbc/Config.in +++ b/package/sbc/Config.in @@ -1,8 +1,14 @@ config BR2_PACKAGE_SBC bool "sbc" - select BR2_PACKAGE_LIBSNDFILE help An audio codec to connect bluetooth high quality audio devices like headphones or loudspeakers. http://www.bluez.org/ + +config BR2_PACKAGE_SBC_TOOLS + bool "tools" + depends on BR2_PACKAGE_SBC + select BR2_PACKAGE_LIBSNDFILE + help + Build the command-line SBC tools as well as the library. diff --git a/package/sbc/sbc.mk b/package/sbc/sbc.mk index 744ce5f895..245ff11ced 100644 --- a/package/sbc/sbc.mk +++ b/package/sbc/sbc.mk @@ -8,8 +8,15 @@ SBC_VERSION = 2.0 SBC_SOURCE = sbc-$(SBC_VERSION).tar.xz SBC_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth SBC_INSTALL_STAGING = YES -SBC_DEPENDENCIES = libsndfile host-pkgconf +SBC_DEPENDENCIES = host-pkgconf SBC_LICENSE = GPL-2.0+ (programs), LGPL-2.1+ (library) SBC_LICENSE_FILES = COPYING COPYING.LIB +ifeq ($(BR2_PACKAGE_SBC_TOOLS),y) +SBC_DEPENDENCIES += libsndfile +SBC_CONF_OPTS += --enable-tools --enable-tester +else +SBC_CONF_OPTS += --disable-tools --disable-tester +endif + $(eval $(autotools-package)) -- 2.38.1 From john at metanate.com Thu Oct 20 12:07:39 2022 From: john at metanate.com (John Keeping) Date: Thu, 20 Oct 2022 13:07:39 +0100 Subject: [Buildroot] [PATCH] package/sbc: add config option to control tools build Message-ID: <20221020120739.1929645-1-john@metanate.com> libsndfile is only needed by the sbctester utility and the library can be built without this dependency. Add a config option to cover not just sbctester but the command-line utilities as well. While the utilities may be useful for debugging, normal usage will only need libsbc and these applications can be omitted. Signed-off-by: John Keeping --- package/sbc/Config.in | 8 +++++++- package/sbc/sbc.mk | 9 ++++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/sbc/Config.in b/package/sbc/Config.in index f1dbc0ec2c..7e832b1e87 100644 --- a/package/sbc/Config.in +++ b/package/sbc/Config.in @@ -1,8 +1,14 @@ config BR2_PACKAGE_SBC bool "sbc" - select BR2_PACKAGE_LIBSNDFILE help An audio codec to connect bluetooth high quality audio devices like headphones or loudspeakers. http://www.bluez.org/ + +config BR2_PACKAGE_SBC_TOOLS + bool "tools" + depends on BR2_PACKAGE_SBC + select BR2_PACKAGE_SBC_TOOLS + help + Build the command-line SBC tools as well as the library. diff --git a/package/sbc/sbc.mk b/package/sbc/sbc.mk index 744ce5f895..245ff11ced 100644 --- a/package/sbc/sbc.mk +++ b/package/sbc/sbc.mk @@ -8,8 +8,15 @@ SBC_VERSION = 2.0 SBC_SOURCE = sbc-$(SBC_VERSION).tar.xz SBC_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth SBC_INSTALL_STAGING = YES -SBC_DEPENDENCIES = libsndfile host-pkgconf +SBC_DEPENDENCIES = host-pkgconf SBC_LICENSE = GPL-2.0+ (programs), LGPL-2.1+ (library) SBC_LICENSE_FILES = COPYING COPYING.LIB +ifeq ($(BR2_PACKAGE_SBC_TOOLS),y) +SBC_DEPENDENCIES += libsndfile +SBC_CONF_OPTS += --enable-tools --enable-tester +else +SBC_CONF_OPTS += --disable-tools --disable-tester +endif + $(eval $(autotools-package)) -- 2.38.1 From james.hilliard1 at gmail.com Thu Oct 20 13:29:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Thu, 20 Oct 2022 09:29:18 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: Message-ID: On Thu, Oct 20, 2022 at 2:53 AM Giulio Benetti wrote: > > Hi James, > > > Il giorno 20 ott 2022, alle ore 02:23, James Hilliard ha scritto: > > > > ?On Wed, Oct 19, 2022 at 7:36 PM James Hilliard > > wrote: > >> > >>> On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti > >>> wrote: > >>> > >>> Fixes: > >>> http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ > >> > >> Hmm, this looks like a bug in the libnss makefile, what was the failure > >> seen with make 4.3 here: > >> https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > > > This patch also does not fix the build with make 4.4(make from master branch) > > from my testing. > > > > Even without shuffle mode enabled the build appears to always fail. > > Thank you for testing, I have forgotten exactly to ask you to do it :-) since almost all the failures comes from your asahi-mini that I remember to have Make 4.4. I'm running make master branch on all my autobuilders at the moment, the failures aren't limited to asahi-mini: http://autobuild.buildroot.net/?reason=libnss-3.84 > > So I try to reproduce the bug here at me and find out a fix. Use make master branch from here for testing: git clone https://git.savannah.gnu.org/git/make.git > > Thanks again > > Best regards > Giulio > > > > >> > >>> > >>> Signed-off-by: Giulio Benetti > >>> --- > >>> package/libnss/libnss.mk | 4 ++-- > >>> 1 file changed, 2 insertions(+), 2 deletions(-) > >>> > >>> diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > >>> index 041b2cfc56..a613006f70 100644 > >>> --- a/package/libnss/libnss.mk > >>> +++ b/package/libnss/libnss.mk > >>> @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > >>> LIBNSS_CPE_ID_VENDOR = mozilla > >>> LIBNSS_CPE_ID_PRODUCT = nss > >>> > >>> -# Don't parallel build if make version = 4.3 > >>> -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > >>> +# Don't parallel build if make version = 4.3 or 4.4 > >>> +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > >>> LIBNSS_MAKE = $(MAKE1) > >>> else > >>> LIBNSS_MAKE = $(MAKE) > >>> -- > >>> 2.34.1 > >>> > >>> _______________________________________________ > >>> buildroot mailing list > >>> buildroot at buildroot.org > >>> https://lists.buildroot.org/mailman/listinfo/buildroot > From tobias at waldekranz.com Thu Oct 20 14:14:08 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:08 +0200 Subject: [Buildroot] [PATCH 0/4] package/kmemd: new package Message-ID: <20221020141412.346992-1-tobias@waldekranz.com> kmemd implements a GDB stub that let's you access a running kernel's memory. There's no way to control the flow of execution in any way, but you can inspect internal data structures with all the DWARF parsing and scripting power of GDB - without the need for any hardware debugger or a dedicated KGDB serial port. I've chosen not to install any startup scripts for it, since it effectively provides the same service as Heartbleed, but with a much better UX :) The expectation is that the user will start it manually when needed. Before adding kmemd, 1-3/4 fixes some issues around libbpf. The cross-compilation fix for 32-bit targets (1/4) has been accepted upstream[1]. [1]: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Tobias Waldekranz (4): package/libbpf: fix cross compilation for 32-bit targets package/libbpf: remove architecture restrictions package/libbpf: extract dependencies to separate kconfig symbol package/kmemd: new package package/Config.in | 1 + package/kmemd/Config.in | 11 ++++++ package/kmemd/kmemd.hash | 5 +++ package/kmemd/kmemd.mk | 20 ++++++++++ ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ package/libbpf/Config.in | 24 ++++-------- 6 files changed, 81 insertions(+), 17 deletions(-) create mode 100644 package/kmemd/Config.in create mode 100644 package/kmemd/kmemd.hash create mode 100644 package/kmemd/kmemd.mk create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:09 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-2-tobias@waldekranz.com> Add upstream patch that sources the library path (lib vs. lib64) from the compiler rather than from uname(1). Signed-off-by: Tobias Waldekranz --- ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch new file mode 100644 index 0000000000..3730b2fa41 --- /dev/null +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch @@ -0,0 +1,37 @@ +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Fri, 14 Oct 2022 21:14:14 +0200 +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets + +Determining the correct library installation path (lib vs. lib64) +using uname(1) breaks in cross compilation scenarios where word widths +differ between the host and target system. + +Instead, source the information from the compilers '-dumpmachine' +option (supported by both GCC and Clang). + +We call this the "host" architecture, using the same nomenclature as +Autotools (--host configure option). + +Signed-off-by: Tobias Waldekranz +--- + src/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index 3cd0854..d535f81 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -77,7 +77,8 @@ INSTALL = install + + DESTDIR ?= + +-ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(shell uname -m)),) ++HOSTARCH = $(firstword $(subst -, ,$(shell $(CC) -dumpmachine))) ++ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(HOSTARCH)),) + LIBSUBDIR := lib64 + else + LIBSUBDIR := lib +-- +2.34.1 + -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:11 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-4-tobias@waldekranz.com> This makes it obvious that the comment is just the negation of the dependency requirements. It also makes it easier for other packages to depend on libbpf. Signed-off-by: Tobias Waldekranz --- package/libbpf/Config.in | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index 1465366c9e..7e816c193d 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,11 +1,16 @@ -config BR2_PACKAGE_LIBBPF - bool "libbpf" +config BR2_PACKAGE_LIBBPF_SUPPORTED + bool depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils + default y + +config BR2_PACKAGE_LIBBPF + bool "libbpf" + depends on BR2_PACKAGE_LIBBPF_SUPPORTED select BR2_PACKAGE_ELFUTILS select BR2_PACKAGE_ZLIB help @@ -17,8 +22,4 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_TOOLCHAIN_HAS_SYNC_4 - depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ - || !BR2_TOOLCHAIN_HAS_THREADS \ - || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 \ - || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC) + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:10 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:10 +0200 Subject: [Buildroot] [PATCH 2/4] package/libbpf: remove architecture restrictions In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-3-tobias@waldekranz.com> Since 3145adfb69ba, libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. f693354c30bd was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM. Signed-off-by: Tobias Waldekranz --- package/libbpf/Config.in | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index b3d6e44c6a..1465366c9e 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,15 +1,5 @@ -config BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS - bool - # see src/bpf.c - default y if BR2_arc - default y if BR2_aarch64 || BR2_aarch64_be - default y if BR2_i386 || BR2_x86_64 - default y if BR2_sparc || BR2_sparc64 - default y if BR2_s390x - config BR2_PACKAGE_LIBBPF bool "libbpf" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils @@ -27,7 +17,6 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:12 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:12 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-5-tobias@waldekranz.com> kmemd let's you inspect a live Linux kernel's memory using GDB. Signed-off-by: Tobias Waldekranz --- package/Config.in | 1 + package/kmemd/Config.in | 11 +++++++++++ package/kmemd/kmemd.hash | 5 +++++ package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ 4 files changed, 37 insertions(+) create mode 100644 package/kmemd/Config.in create mode 100644 package/kmemd/kmemd.hash create mode 100644 package/kmemd/kmemd.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ebafe11dea 100644 --- a/package/Config.in +++ b/package/Config.in @@ -111,6 +111,7 @@ menu "Debugging, profiling and benchmark" source "package/iozone/Config.in" source "package/kexec/Config.in" source "package/kexec-lite/Config.in" + source "package/kmemd/Config.in" source "package/kvm-unit-tests/Config.in" source "package/kyua/Config.in" source "package/latencytop/Config.in" diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in new file mode 100644 index 0000000000..2190488b0f --- /dev/null +++ b/package/kmemd/Config.in @@ -0,0 +1,11 @@ +config BR2_PACKAGE_KMEMD + bool "kmemd" + depends on BR2_PACKAGE_LIBBPF_SUPPORTED + select BR2_PACKAGE_LIBBPF + help + Explore a live Linux kernel's memory using GDB + + https://github.com/wkz/kmemd + +comment "kmemd needs libbpf" + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash new file mode 100644 index 0000000000..60b8589dd2 --- /dev/null +++ b/package/kmemd/kmemd.hash @@ -0,0 +1,5 @@ +# Locally calculated +md5 9954bf82279eeb0da016654689f69ac2 kmemd-1.0.0.tar.gz +sha1 3ae3bdceb70d674f41f56cd489c7497944b9b0f0 kmemd-1.0.0.tar.gz +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/kmemd/kmemd.mk b/package/kmemd/kmemd.mk new file mode 100644 index 0000000000..902941b981 --- /dev/null +++ b/package/kmemd/kmemd.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# kmemd +# +################################################################################ + +KMEMD_VERSION = 1.0.0 +KMEMD_SITE = https://github.com/wkz/kmemd/releases/download/$(KMEMD_VERSION) +KMEMD_LICENSE = GPL-2.0 +KMEMD_LICENSE_FILES = COPYING +KMEMD_DEPENDENCIES = libbpf + +define KMEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_BPF_SYSCALL) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) + $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS) +endef + +$(eval $(autotools-package)) -- 2.34.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:28:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:28:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/rtl_433: add RTL_433_CPE_ID_VENDOR Message-ID: <20221020162856.201351-1-fontaine.fabrice@gmail.com> cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 Signed-off-by: Fabrice Fontaine --- package/rtl_433/rtl_433.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rtl_433/rtl_433.mk b/package/rtl_433/rtl_433.mk index 8326caedb2..74a0b54a3d 100644 --- a/package/rtl_433/rtl_433.mk +++ b/package/rtl_433/rtl_433.mk @@ -8,6 +8,7 @@ RTL_433_VERSION = 21.12 RTL_433_SITE = $(call github,merbanan,rtl_433,$(RTL_433_VERSION)) RTL_433_LICENSE = GPL-2.0+ RTL_433_LICENSE_FILES = COPYING +RTL_433_CPE_ID_VENDOR = rtl_433_project # Force Release build to remove ASAN. RTL_433_CONF_OPTS = \ -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:29:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:29:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/zlog: bump to version 1.2.16 Message-ID: <20221020162948.201798-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine --- ...verflow-at-zlog_conf_build_with_file.patch | 25 ------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 2 +- 3 files changed, 2 insertions(+), 27 deletions(-) delete mode 100644 package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..6e85cf409b 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:33:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:33:12 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/zlog: bump to version 1.2.16 Message-ID: <20221020163312.203021-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Drop ZLOG_IGNORE_CVES ...verflow-at-zlog_conf_build_with_file.patch | 25 ------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 5 +--- 3 files changed, 2 insertions(+), 30 deletions(-) delete mode 100644 package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..329f2cfe2c 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,16 +4,13 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING ZLOG_CPE_ID_VENDOR = zlog_project ZLOG_INSTALL_STAGING = YES -# 0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch -ZLOG_IGNORE_CVES += CVE-2021-43521 - define ZLOG_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE1) CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" \ -C $(@D) all -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 17:02:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 19:02:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/squashfs: security bump to version 4.5.1 Message-ID: <20221020170233.230696-1-fontaine.fabrice@gmail.com> - Fix CVE-2021-40153 - CVE-2021-41072 which is a writing outside of destination exploit, has been fixed. - Drop patch (already in version) - Set INSTALL_MANPAGES_DIR to an empty value to disable build and install of man pages which were added with https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 Signed-off-by: Fabrice Fontaine --- ...e-of-INSTALL_DIR-for-symlink-targets.patch | 37 ------------------- package/squashfs/squashfs.hash | 2 +- package/squashfs/squashfs.mk | 8 ++-- 3 files changed, 6 insertions(+), 41 deletions(-) delete mode 100644 package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch diff --git a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch b/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch deleted file mode 100644 index 997719e63a..0000000000 --- a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch +++ /dev/null @@ -1,37 +0,0 @@ -From f5c908e92d4c055859be2fddbda266d9e3bfd415 Mon Sep 17 00:00:00 2001 -From: Patrick McCarty -Date: Mon, 26 Jul 2021 11:38:43 -0700 -Subject: [PATCH] Avoid use of INSTALL_DIR for symlink targets - -In case INSTALL_DIR is overridden with a staged install location, using -INSTALL_DIR for the symlink target path prefix will yield an incorrect location -for the final installation. - -Because the symlink itself is already installed to INSTALL_DIR, simply removing -the INSTALL_DIR prefix suffices as a fix. - -Note that using $DESTDIR/$INSTALL_DIR where appropriate can avoid this type of -issue, but that can be considered a future enhancement. - -Signed-off-by: Patrick McCarty -Upstream: f5c908e92d4c055859be2fddbda266d9e3bfd415 -Signed-off-by: Thomas Petazzoni ---- - squashfs-tools/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/squashfs-tools/Makefile b/squashfs-tools/Makefile -index f5a55f1..7262a2e 100755 ---- a/squashfs-tools/Makefile -+++ b/squashfs-tools/Makefile -@@ -406,5 +406,5 @@ install: mksquashfs unsquashfs - mkdir -p $(INSTALL_DIR) - cp mksquashfs $(INSTALL_DIR) - cp unsquashfs $(INSTALL_DIR) -- ln -fs $(INSTALL_DIR)/unsquashfs $(INSTALL_DIR)/sqfscat -- ln -fs $(INSTALL_DIR)/mksquashfs $(INSTALL_DIR)/sqfstar -+ ln -fs unsquashfs $(INSTALL_DIR)/sqfscat -+ ln -fs mksquashfs $(INSTALL_DIR)/sqfstar --- -2.31.1 - diff --git a/package/squashfs/squashfs.hash b/package/squashfs/squashfs.hash index 09a2bae364..13d5aed71f 100644 --- a/package/squashfs/squashfs.hash +++ b/package/squashfs/squashfs.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 b9e16188e6dc1857fe312633920f7d71cc36b0162eb50f3ecb1f0040f02edddd squashfs-4.5.tar.gz +sha256 277b6e7f75a4a57f72191295ae62766a10d627a4f5e5f19eadfbc861378deea7 squashfs-4.5.1.tar.gz # License files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squashfs/squashfs.mk b/package/squashfs/squashfs.mk index f64d441c9b..323908d94e 100644 --- a/package/squashfs/squashfs.mk +++ b/package/squashfs/squashfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUASHFS_VERSION = 4.5 +SQUASHFS_VERSION = 4.5.1 SQUASHFS_SITE = $(call github,plougher,squashfs-tools,$(SQUASHFS_VERSION)) SQUASHFS_LICENSE = GPL-2.0+ SQUASHFS_LICENSE_FILES = COPYING @@ -75,7 +75,8 @@ endef define SQUASHFS_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) $(SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin \ + INSTALL_MANPAGES_DIR="" install endef define HOST_SQUASHFS_BUILD_CMDS @@ -89,7 +90,8 @@ endef define HOST_SQUASHFS_INSTALL_CMDS $(HOST_MAKE_ENV) $(MAKE) $(HOST_SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin \ + INSTALL_MANPAGES_DIR="" install endef $(eval $(generic-package)) -- 2.35.1 From bugzilla at busybox.net Thu Oct 20 17:13:12 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 17:13:12 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 --- Comment #1 from hello.skyclo at gmail.com --- I downgraded to the 2022.08.1 release from the master branch and nodejs builds. I think there is a regression somewhere between the 08 release and the current commit, but I'm not sure where. The overall build still fails, however, it is due to Bug 14936 (nodejs/node#37441). I'll try to look into it more. -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 17:14:13 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 17:14:13 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 hello.skyclo at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Host| |x86_64 Target| |i386 -- You are receiving this mail because: You are on the CC list for the bug. From giulio.benetti at benettiengineering.com Thu Oct 20 17:40:31 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 19:40:31 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.1 Message-ID: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..9489f25c6a 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 4a6ce097b75a8121facc4ba83b5b083bfec657f45b003cd5a3424f2ae6b4434d harfbuzz-5.3.1.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..b0112168e1 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.1 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) -- 2.34.1 From giulio.benetti at benettiengineering.com Thu Oct 20 17:41:48 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 19:41:48 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.0 In-Reply-To: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> References: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> Message-ID: <5715fff8-3bee-58ac-4b1c-0a902a3bc64a@benettiengineering.com> Hi All, On 10/10/22 20:11, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash > index 9ec5c63f55..3582de2f30 100644 > --- a/package/harfbuzz/harfbuzz.hash > +++ b/package/harfbuzz/harfbuzz.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz > +sha256 a05e19e3f52da24ed071522f0fddf872157d7d25e869cfd156cd6f1e81c42152 harfbuzz-5.3.0.tar.xz > sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING > diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk > index 75d55106ea..8ef41d3952 100644 > --- a/package/harfbuzz/harfbuzz.mk > +++ b/package/harfbuzz/harfbuzz.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -HARFBUZZ_VERSION = 5.1.0 > +HARFBUZZ_VERSION = 5.3.0 > HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) > HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz > HARFBUZZ_LICENSE = MIT, ISC (ucdn library) This is superseded by: https://patchwork.ozlabs.org/project/buildroot/patch/20221020174031.335520-1-giulio.benetti at benettiengineering.com/ Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas From simon.richter at ptwdosimetry.com Thu Oct 20 18:16:38 2022 From: simon.richter at ptwdosimetry.com (Richter Simon) Date: Thu, 20 Oct 2022 18:16:38 +0000 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221019205236.GG3666@scaer> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> Message-ID: Hi Yann, Am 19.10.22 um 22:52 schrieb Yann E. MORIN: > Could you provide a bit more details on how this works? Sure. Currently the script generates a config file containing: [source.crates-io] replace-with = "vendored-sources" [source.vendored-sources] directory = "VENDOR" This works for most projects since they do not use dependencies from other sources besides crates.io. But if a project needs dependencies from other sources, say github, there needs to be an extra entry for each non-crates.io dependency. As an example, here is the needed vendor config for conduit - a matrix homeserver. (https://gitlab.com/famedly/conduit rev cb2b5beea8a3fb27ed514ee9e46b5729aa272179) [source.crates-io] replace-with = "vendored-sources" [source."https://github.com/ruma/ruma"] git = "https://github.com/ruma/ruma" rev = "fba6f70c2df8294f96567f56464a46e3d237a8e9" replace-with = "vendored-sources" [source."https://github.com/timokoesters/heed.git"] git = "https://github.com/timokoesters/heed.git" rev = "f6f825da7fb2c758867e05ad973ef800a6fe1d5d" replace-with = "vendored-sources" [source."https://github.com/timokoesters/reqwest"] git = "https://github.com/timokoesters/reqwest" rev = "57b7cf4feb921573dfafad7d34b9ac6e44ead0bd" replace-with = "vendored-sources" [source.vendored-sources] directory = "vendor" For the current script this means one has to create a patch for the generated .cargo/config to contain the missing lines. That is not nice for two reasons: 1. the corresponding package must contain a patch that patches a file that is not part of the original sources of the package. 2. every time one or more dependencies are updated, the patch has to be changed. > Also, can we have a package that uses non-crates.io dependencies, so > that we have a test-case to ensure we have no regression? I'm not sure if i understood that correctly. Do you mean bringing a package into buildroot or if we already have a package that can be used for a test? If the second, no, i did not find any package that has non-crates.io dependencies. > This means that vendoring step is then entirely silent, and there is no > progress report. > > Since the download during the vendoring can be quite big, that means a > long pause without any feedback to the user that something is going on. > > Also, if there is a download issue, there is no way to find what > happened. That's correct, did not think about that. > Can we keep the vendoring to stdout as it currently is, and re-run it > right after, just to generate the config.toml file? I.e. something like: > > cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR 2>&1 \ > |sed -ne '1,/To use vendored sources, add/!p' > .cargo/config While digging around i found the following solution: cargo vendor \ --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ --locked VENDOR \ | tee .cargo/config Cargo seems to print all progress output to stderr but not the needed output for the config. This goes to stdout. So we only have to tee stdout to the .cargo/config file. I will update the patch accordingly. > Finally, unrelated to your change: if the package already has a > .cargo/config.toml, then we irremediably override it. Is there something > in that file that would otherwise be required to do the build? Yes, i noticed that too. Overwriting a possibly existing project specific configuration is not good. I think this also should be changed (in a different patch, as mentioned). > Can we simply append to the file rather than overwrite it, i.e.: > .... >> .cargo/config.toml Unfortunately it is not that simple because of two reasons: 1. cargo looks for a .cargo/config or (up from cargo 1.39) a .cargo/config.toml file for configuration. If both files exist, cargo uses .cargo/config and ignores the .cargo/config.toml file. 2. if configuration entries for vendoring already exist in a configuration, it is not allowed to add them again. Cargo will not build the project if a corresponding entry exists more than once. The first case would be quiet easy to address but the second one would need some sort of merging. > Note that if we want to change that, this should be a different patch, > of course. Absolutely. So, speaking for this patch, i would keep the current behavior "overwrite every possibly existing config with the vendoring information". Regards, Simon From bernd.kuhls at t-online.de Thu Oct 20 18:54:59 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Thu, 20 Oct 2022 20:54:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 Message-ID: <20221020185459.28407-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...ion-to-disable-optional-neon-suppor.patch} | 0 ...-Include-stddef.h-to-fix-build-erro.patch} | 0 ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ .../0007-include-drop-c11-compat-h.patch | 100 -------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..3712c79db0 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.2 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..f10f8fe112 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html +sha256 2de11fb74fc5cc671b818e49fe203cea0cd1d8b69756e97cdb06a2f4e78948f9 mesa-22.2.2.tar.xz +sha512 a1eb67e1ae4880c79b1fdc570f4389baba0b8ba796da7e695c9af19a7d92b6c06b95570e6c796548b61355989025fb7efbf9acac74cbd695f7e297dc913b933c mesa-22.2.2.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index daefd6f6d5..bac071ecb3 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.2 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From yann.morin.1998 at free.fr Thu Oct 20 20:25:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Thu, 20 Oct 2022 22:25:57 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> Message-ID: <20221020202557.GA2992523@scaer> Simon, All, On 2022-10-20 18:16 +0000, Richter Simon spake thusly: > Am 19.10.22 um 22:52 schrieb Yann E. MORIN: > > Could you provide a bit more details on how this works? [--SNIP--] > But if a project needs dependencies from other sources, say github, > there needs to be an extra entry for each non-crates.io dependency. > As an example, here is the needed vendor config for conduit - a > matrix homeserver. > (https://gitlab.com/famedly/conduit > rev cb2b5beea8a3fb27ed514ee9e46b5729aa272179) > > [source.crates-io] > replace-with = "vendored-sources" > > [source."https://github.com/ruma/ruma"] > git = "https://github.com/ruma/ruma" > rev = "fba6f70c2df8294f96567f56464a46e3d237a8e9" > replace-with = "vendored-sources" > > [source."https://github.com/timokoesters/heed.git"] > git = "https://github.com/timokoesters/heed.git" > rev = "f6f825da7fb2c758867e05ad973ef800a6fe1d5d" > replace-with = "vendored-sources" > > [source."https://github.com/timokoesters/reqwest"] > git = "https://github.com/timokoesters/reqwest" > rev = "57b7cf4feb921573dfafad7d34b9ac6e44ead0bd" > replace-with = "vendored-sources" > > [source.vendored-sources] > directory = "vendor" Ok, thanks, that helps see the overal concept. I see all the above use git repositories directly, so I suspect this is going to cause explicit git-clone + build (that's OK). However, I was also wondering if one could have a "registry" like crates.io, either internal to a company, or another public resource elsewhere, and how that would work... > > Also, can we have a package that uses non-crates.io dependencies, so > > that we have a test-case to ensure we have no regression? > I'm not sure if i understood that correctly. Do you mean bringing a > package into buildroot Yes, I was wondering if there was a publicly visible package that we could cary in Buildroot, so that we know the feature would be regularly exercised. You pointed to conduit: it wouldbe good to have it packaged in Buildrooot. [--SNIP--] > > Can we keep the vendoring to stdout as it currently is, and re-run it > > right after, just to generate the config.toml file? I.e. something like: [--SNIP--] > While digging around i found the following solution: > cargo vendor \ > --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > --locked VENDOR \ > | tee .cargo/config > > Cargo seems to print all progress output to stderr but not the needed > output for the config. This goes to stdout. So we only have to tee stdout > to the .cargo/config file. I will update the patch accordingly. Great! :-) Please, also note that this has the potential to generate different hashes, so please check existing cargo packages to see what breaks. If we can't keep generating the same archives, then we must find a way to dfferentiate the newer archives so they do not clash with the older ones. Something like: diff --git a/package/pkg-download.mk b/package/pkg-download.mk index 0718f21aad..e247fd38c5 100644 --- a/package/pkg-download.mk +++ b/package/pkg-download.mk @@ -22,6 +22,7 @@ export LOCALFILES := $(call qstrip,$(BR2_LOCALFILES)) # download backend: BR_FMT_VERSION_git = -br1 BR_FMT_VERSION_svn = -br2 +BR_FMT_VERSION_cargp = -cargo1 DL_WRAPPER = support/download/dl-wrapper diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk index 0945e6ed31..7486d12499 100644 --- a/package/pkg-utils.mk +++ b/package/pkg-utils.mk @@ -48,7 +48,7 @@ pkgname = $(lastword $(subst /, ,$(pkgdir))) # Helper to build the extension for a package archive, based on various # conditions. # $(1): upper-case package name -pkg_source_ext = $(BR_FMT_VERSION_$($(1)_SITE_METHOD)).tar.gz +pkg_source_ext = $(BR_FMT_VERSION_$($(1)_SITE_METHOD))$(BR_FMT_VERSION_$($(1)_DOWNLOAD_POST_PROCESS)).tar.gz # Define extractors for different archive suffixes INFLATE.bz2 = $(BZCAT) Note: this is probably not sufficient, but that gives you a lead if needed. Also, we'd need a comment at the top of the cargo-post-process helper, like we have at the top of the git helper for example. > > Finally, unrelated to your change: if the package already has a > > .cargo/config.toml, then we irremediably override it. Is there something > > in that file that would otherwise be required to do the build? > > Yes, i noticed that too. Overwriting a possibly existing project specific > configuration is not good. > I think this also should be changed (in a different patch, as mentioned). Or we can wait for until something actually needs it, so that we do have an actual case to look at. > > Can we simply append to the file rather than overwrite it, i.e.: > > .... >> .cargo/config.toml > > Unfortunately it is not that simple because of two reasons: > > 1. cargo looks for a .cargo/config or (up from cargo 1.39) a > .cargo/config.toml file for configuration. If both files exist, cargo uses > .cargo/config and ignores the .cargo/config.toml file. > > 2. if configuration entries for vendoring already exist in a configuration, > it is not allowed to add them again. Cargo will not build the project if a > corresponding entry exists more than once. > > The first case would be quiet easy to address but the second one would > need some sort of merging. Yes, so that all calls for waiting until we do have an actual issue. > So, speaking for this patch, i would keep the current behavior "overwrite > every possibly existing config with the vendoring information". Yes, because that has so far not caused an issue (at least that we noticed), so this means it is not an actual problem. Thanks! Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From b.bilas at grinn-global.com Thu Oct 20 21:13:13 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Thu, 20 Oct 2022 23:13:13 +0200 Subject: [Buildroot] [PATCH] package/ttyd: bump to version 1.7.2 In-Reply-To: <20221020211313.874624-1-b.bilas@grinn-global.com> References: <20221020211313.874624-1-b.bilas@grinn-global.com> Message-ID: <20221020211313.874624-2-b.bilas@grinn-global.com> Signed-off-by: Bartosz Bilas --- package/ttyd/ttyd.hash | 2 +- package/ttyd/ttyd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ttyd/ttyd.hash b/package/ttyd/ttyd.hash index 283288febf..a2a933b63a 100644 --- a/package/ttyd/ttyd.hash +++ b/package/ttyd/ttyd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 47bc98d43cf2060af06378a2113605b229c46895a391613bdaa5a1197bfe5d47 ttyd-1.7.0.tar.gz +sha256 edc44cd5319c0c9d0858081496cae36fc5c54ee7722e0a547dde39537dfb63de ttyd-1.7.2.tar.gz sha256 8b7e100f8311cb428c57609164d93099bada2599f948359045d1ac876a7a625b LICENSE diff --git a/package/ttyd/ttyd.mk b/package/ttyd/ttyd.mk index 7b582a696c..085511b5fd 100644 --- a/package/ttyd/ttyd.mk +++ b/package/ttyd/ttyd.mk @@ -4,7 +4,7 @@ # ################################################################################ -TTYD_VERSION = 1.7.0 +TTYD_VERSION = 1.7.2 TTYD_SITE = $(call github,tsl0922,ttyd,$(TTYD_VERSION)) TTYD_LICENSE = MIT TTYD_LICENSE_FILES = LICENSE -- 2.38.0 From b.bilas at grinn-global.com Thu Oct 20 21:13:12 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Thu, 20 Oct 2022 23:13:12 +0200 Subject: [Buildroot] [PATCH] package/python-esptool: bump version to 4.3 Message-ID: <20221020211313.874624-1-b.bilas@grinn-global.com> Signed-off-by: Bartosz Bilas --- package/python-esptool/python-esptool.hash | 4 ++-- package/python-esptool/python-esptool.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-esptool/python-esptool.hash b/package/python-esptool/python-esptool.hash index 4f19fbde41..7e523a7027 100644 --- a/package/python-esptool/python-esptool.hash +++ b/package/python-esptool/python-esptool.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/esptool/json -md5 60bf3a49a794ff5627552f642f28ea3d esptool-4.1.tar.gz -sha256 51a41655187780cb802a5827fab68a3db0d6206330560459c55fcf0e222f277f esptool-4.1.tar.gz +md5 973b63eac1391d3491846d8676c783e7 esptool-4.3.tar.gz +sha256 03d00312eef258baf83faefd0b912b2251dd0440242da9dcb1b18fe75ed614c3 esptool-4.3.tar.gz # Locally computed sha256 checksums sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/python-esptool/python-esptool.mk b/package/python-esptool/python-esptool.mk index 51bc563c5c..3f33fd7865 100644 --- a/package/python-esptool/python-esptool.mk +++ b/package/python-esptool/python-esptool.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ESPTOOL_VERSION = 4.1 +PYTHON_ESPTOOL_VERSION = 4.3 PYTHON_ESPTOOL_SOURCE = esptool-$(PYTHON_ESPTOOL_VERSION).tar.gz -PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/bb/d5/9d000803520b68fd9f6447cd7c15352a79984196f57f0519839b0f80fb8f +PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/5b/d7/0dae311a94a490d7b7af2f4fab079b34f6244c6129017997bc994f7b360b PYTHON_ESPTOOL_SETUP_TYPE = setuptools PYTHON_ESPTOOL_LICENSE = GPL-2.0+ PYTHON_ESPTOOL_LICENSE_FILES = LICENSE -- 2.38.0 From thomas.petazzoni at bootlin.com Fri Oct 21 05:48:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 21 Oct 2022 05:48:52 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-20 Message-ID: <20221021054900.8640783EAA@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-20 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 8 | 1 | 0 | 9 | 2022.08.x | 8 | 13 | 0 | 21 | master | 142 | 251 | 15 | 408 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 17 host-f2fs-tools-1.15.0 | 17 glibc-2.36-44-g2628500f5dff... | 16 libnss-3.84 | 15 brltty | 14 host-sentry-cli-1.59.0 | 14 efivar-38 | 8 igd2-for-linux-2.1 | 8 libarchive-3.6.1 | 8 btrfs-progs-5.16.2 | 7 host-go-1.19.1 | 7 systemd-250.4 | 7 dash-0.5.11.5 | 6 host-pahole-73383b3a39afe86... | 5 libgpg-error-1.45 | 5 sysvinit-2.99 | 5 gensio-2.5.5 | 4 host-binutils-2.38 | 4 perl-5.34.1 | 4 xz-5.2.7 | 4 autofs-5.1.8 | 3 dahdi-linux-5c840cf43838e06... | 3 file-5.41 | 3 host-binutils-2.37 | 3 linux-6.0.1 | 3 lxc-4.0.12 | 3 fs/cpio/cpio.mk:117: /tmp/i... | 2 host-gcc-final-10.4.0 | 2 host-gdb-arc-2020.09-releas... | 2 host-rust-1.64.0 | 2 libabseil-cpp-20220623.1 | 2 linux-pam-1.5.2 | 2 linuxptp-3.1.1 | 2 open62541-v1.3.3 | 2 openpgm-5-3-128 | 2 traceroute-2.1.0 | 2 ulog-0389d243352255f6182326... | 2 unknown | 2 ace-7.0.6 | 1 afboot-stm32-3566acd582e553... | 1 apcupsd-3.14.14 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 cryptodev-linux-1.12 | 1 dhcp-4.4.3-P1 | 1 dmalloc-5.6.5 | 1 elfutils-0.186 | 1 exempi-2.6.1 | 1 fontconfig-2.13.1 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 gobject-introspection-1.72.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.39 | 1 host-gcc-initial-11.3.0 | 1 host-runc-1.1.4 | 1 kmod-29 | 1 libdeflate-1.12 | 1 libg7221-dbfc29d4806ecdace5... | 1 libglib2-2.72.3 | 1 linux-5.10.145-cip17 | 1 log4cplus-2.0.8 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 nodejs-16.17.1 | 1 pcre2-10.40 | 1 perl-net-ssleay-1.85 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 poppler-21.12.0 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 stress-ng-0.13.05 | 1 tcf-agent-1.7.0 | 1 tealdeer-1.5.0 | 1 uccp420wlan-6.9.1 | 1 uqmi-0a19b5b77140465c29e2af... | 1 vlc-3.0.17.4 | 1 wolfssl-5.5.1 | 1 xenomai-3.0.10 | 1 xfsprogs-5.14.2 | 1 xxhash-0.8.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/bbb8ece5f48ce299d523e1fb2a1b13cac1876080 | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/e9d07d3f53bae1a40faf0d8d65edacd87abc66d4 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/18f11a29b8bdd6f1e09124b72e003df9ca292b65 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4c3edf71897b4786c7cbe35e7c2857f38869df6a | i586 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/aa29f52145e9554ee82915b83785677ee4565777 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/16b6dff41f9103c70cdbed4e200f31f730803716 | mips | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/a03d142b78e2dcb23cf64aab1364a4b80baeb046 | sh4eb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2a643ecde68ea487203aa7e18c2bfe785bfd8e83 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/77e615ce20ad8878147dc7f3a5ef0122561aee21 | arm | brltty | TIM | http://autobuild.buildroot.net/results/b12e6f29fea51d26be649d505414d4c0530a93fd | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f5a3fb0555ca3771dd6436f47f91ce8c97d63f06 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/54fe1df4700a5ab7fc3ba2b39d42da32142a76d0 | arceb | brltty | TIM | http://autobuild.buildroot.net/results/8d8fcb7d4f36e2c78c3427e1b3c603b7263dc499 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/85f189edfd372fa7d00aced5151ff1ce543ce211 | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/871103e26ef4b64793b910757d4b1026d485e5b8 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/c6825b654d8996793a1db3a90ad4c7f038b06f2d | s390x | brltty | TIM | http://autobuild.buildroot.net/results/90b06d662d5837a552a0c50aa144adddd416470c | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/c8340dcbf684f0784352729d2fe9acdeaae3cd33 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/950c284b3cff4d6dd3e03ac851286af2df20c1c7 | arm | brltty | TIM | http://autobuild.buildroot.net/results/f5aa923c4aa07ebd16e61e6cd481d4aea8867126 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/ce367e70d8f2410ea693c54842a872e9a53e0dfe | or1k | brltty | TIM | http://autobuild.buildroot.net/results/337a7d66744b911941577bac8787a28a77d27924 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/092b5be3b452333a7ef84d4b203919b25d4b62d7 | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/807bb336cba53aac33ab650d9725704c2f4ace3f | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f7df0be03f4a0c4d8d73a586aad9cfdd95176a8e | ORPH sh4a | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1a57344b588e5dba4fcf3c6e5e1896fe87e9bee0 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ee57bc714abc76f559cdb9af5896e3c24d01bca3 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c60e7876565a617d3cbcdc4fd18228f4c6d4c92c | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8abccb416d2280f87e6d8b4a3e5d8a0e687fa9a5 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4db8d0353d285dec7db3106a73883f10d6b9dfe1 | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3192a4c06caff2d8644ef68a515132ef46d5b7b6 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d322853f628fbe1058756863151dc797f49d549e | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/55ab224e934d6e945b43541b4d2d2ab0cc916a40 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8d58b09928f130880f46caa01df577f948196451 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c83918c20b648f5e86435560c8072925149a7e7 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e0d4748f048b79c1eefcce2822ddd2ca11a379be | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/33ad5c2ea1625e35149f62efec7fa10831aef44f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/967b0a9d56f7a3052d5b0e45ce5533800e2acff8 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0a1ce9544231776ba5060fd09e947ce155dc8d0d | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/683d4caa58f7134c131bf830278d7b06c014c942 | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8f1739a5ed3891067dbce8cc6b8ce9a204eb3d7a | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4346ea316ab6a49a8a916109369e227dc3d7f5a4 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/71f83e3f271336a30fc1ec4586fa2af09b8c8cc9 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e21d8db473f5f07445352947401dde1f1e93bc89 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ffd46761a9385b21cbf0c27462a77caac44789a2 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b4c4e4f0556eda282de3d92776dbd4cf6cb1bd6f | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f10b4444cc78e740427aa0dc56ef851a9c43c490 | mips | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/1d996fa82b113754651b645ad0f0667c653350a5 | ORPH microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a0047f623bca65d3cf0e3babb4e11c0bc91bc77a | riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/540f72f17727f219ac3d63c5a004638eae9f69c6 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/b025f40e9d3828166c3c377e614a279ee6716914 | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/3612b02787897bcd45e5662077eaee6e2ae7566d | ORPH armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7466fc00e13fdeeee0fb66f196a4b74a17d57a40 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f464fb53cc908631ef36d512f14398424bdf7376 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0b889dd99e3f63b2d671af3afdff623e1822e697 | ORPH s390x | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/2e12568c73a7b8a48837efd3dccd89dc53f07ff7 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0ce57951d120d4c53fc920528d5cfcfade288744 | ORPH sh4aeb | dhcp-4.4.3-P1 | NOK | http://autobuild.buildroot.net/results/7170d7345ff87a22d023e1c78a464f9883275e47 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/7f7e4a3a82056b369721674a496a6b7585da167c | ORPH mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/3f55304506c335ccb7caba22f9a476a78919e761 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/da98cd951e3feb4a7f877aebb5aaec19663cbbd6 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/662527c274eabcabcc572e4f51ca22f8a465ab2d | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/3de0b0524a99e2b98c1905d32e4630000d3b4128 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/20b4c88a131a848bc7ee06fa63f7edb7b1255b69 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/ef732debf1178beda3ca167da94e98194ffe7672 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/99f91a750869c98adb02020cb1c716e1d390e2e0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/711828b511cd726513206e3054f8d79ec2cfd465 | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5d3e2119589245262e64b90e72970aeeee0a29f6 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/c4eb7aa001ce2efbb184876692b1b869797e29ee | mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/0967265f5c9f112c42a55e7291bc6f7e0b49df7d | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/e43625faa5183b885fc9f3da3a3e38533611ba92 | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/5d592702b1282961945953cc03c5e12cb47c2e10 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/d55e15065b5cc5c11dec8bd79cdc2d7268744eff | ORPH arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/b3d9de3c964d9462c2c3d18363802496004826ea | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/6dbaaf76c0469d70881e97c03b5afc1d93a49583 | riscv32 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/397d7d1cd5cac563417b537b92bb26ed7390399a | xtensa | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/9b7517f5efd527cc2396c634cbc86698e413933b | arc | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/3fbf2c4d0e778f8b38710f2d5f6480020d9bdbee | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fe6327b0275fc6ca35ea6a73051cd9e5c6783887 | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fba1de3529e70e85d44935f4f96123bf081955a8 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/2c9f9cd066f21b9dc18b3af309fef9060a12960e | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ecd1be0af19fb595a3d34c8b4f9b1a1667068d9a | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/12127d54384ac65b0f2757e56ef861af734b9806 | mips | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ff774b108d7d671504b05caa5d8f83255c20fdab | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b07ef13606c198455563d9a7e13677af6b4c2684 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71aa55a4c820e23136dc25cb887683cba7a3759 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478e31d69232ed136293dcd5eabbba890a6a1614 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00345f218ef90fcef86c7ec5b7ad8666d3fd1d1d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dca0e02616865ef5eea6d824b8eccba943547933 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c4d825353994e091c220576ce3ce997d81b9754 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4de103b3eaf05cffa2befb7fe3b7f37088d19c39 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3dbe56462e308dec5305e8fcd5805676f5f4e3c3 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d44e2132b1ad62dc105921b2bd21a28f3e78d03c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc0f9424db1e70bea76deaf6f9990efb2849900c | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2d8b40a37efed240bdaf43e427ad609ed779118 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/672265c96ca499187c8b6adb98015d0453a4f45c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eb3f90c9292c9a2ed8956068b8be37191c648227 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6cf5d3ff88b1cd7572b87fda2216f2edf65ede89 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18c334e25afd59259318819fcf89572955594b17 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c720fe83335b01c29ede4da05c5e6ba856220319 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d94fec13b4d861d208fdd52e04720e5b56bebef4 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/c8caec2370d3d3cd90682659118a799596e025a8 | ORPH microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/40481abc54f021cf28242623d86ffebb3fbe81df | microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/64b8ed9bd4f31a964f2b4e6f2835ef0a56e004e6 | ORPH mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/d422bf0ea065e0b1053f6e50b665f53e7851297e | powerpc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4a214ac239f1dbfd904d5abc9e33e5dbc5479fce | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/3b9aa02532f942683cd669d98442250c27406bf3 | sh4aeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/71fa2e167b33eecb1dba5933f7a52cb89cbda65e | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a69ecd473c32f3fdfc6d8f8f48d34411b99354a7 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12d96e3ef902ff89d815d43df93ee089a605bb19 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/505fa4a3086e4d6acc01a64eda7570a915b661ff | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c979e1c39d01152ae0776ea4d0ac4ce2e2ff877c | arc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/25b9dc0212d07eac2adc6e8d0156dfa1a9f88c61 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/91ea9a771e91b409ed7e2a17979ef842a8acf56a | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d41171a4446c3ccae8cd88c36abfc1f3f771eb21 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/da79f6433242e1f643f90aae20360621e74090c2 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3feb3ec722703e50d7dbc42bcc893b9cf5ab2f7c | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4ec263f33faebf74348e8418b082fc25ad524246 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e96672e638003f0bea2651c79388e9915389abf | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/266f90c7c77ef6994e0921fffcf3cb4990bae67b | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d55106f7b03c59d6354db20ab30339b30d24ff01 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/aeb53a2c4c1ac608e10c905a53ee4ad008501060 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cad92dcfb31567ed8e2f1fa981ea9f6e6ab1786 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f8f2f9ff0b89905864de91cbbaee521ca2534245 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a473b8fc19c38b72accf64dddbd4e78a4858083a | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/21b7a7ac397f1cb19fe653db0ccd496726c470a5 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b41567cb3418103197dc4789d4ce0145aa5fa5f0 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/184739d4eeb66ec6f9da0e8a09ec54a551c51bd0 | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/60f684137aa6031f10a84a45d28340a63943f793 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eba2e3b8a8e815ef69e651fc6b19ee32093b9bea | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/98138a46c3b618385c702f9bb5faa6418ca61631 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/161aa81ec178493a7cd5b650dadacb58c50d98bd | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77fc2075ac5094f023100b3c648d624550619167 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/a10a4bae87df204401431a4a075c55721c1533a6 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/5ff119f89d0592eaee5f3034700d722609bd00df | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9dae5bab40474d62a39983bbc132f0f279449bb1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6c70a5dfc2909322f759ecde39a63d4dd2f2b4c0 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/127f6ed56523af84d85151b72d99d2587a44faa3 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/68cc9b15f3594acb7ea117617ba63f77de4f7fb5 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3377ac72a40a1fdc0d7e84d4d30382f6fb3dfbc8 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dfc6398e21543ba37341989b2844abdac88ca487 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5b6de0a073c076cfd54444c259e2796ca88814e1 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/88fcc4d7e54eb81943df67dde330b3bd42fc66ff | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/fa3efa1bba478f1cb91f884fa42af0d335920d07 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ed6a011f0e185bdf970282a4e9d9151ca88efc88 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8dc39b231738028e22673e53960986e0e4796cd8 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2191c341b01b01438fdbaf92f6ecbae4f7eb7d9a | arm | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/25ad35dd4a295b333ac5bfe19230a5651c604abc | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/5d64ab1333074ec773b0ac157d0fc5b8dbce2e66 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/77e43b58640f9e7360710bd04b0eeb9dd22d8fea | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/020d6a3f9df653c8ab67003c5ff5b19c059e2fda | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c2ebaeda26680473956ae7b1775106686e351c1 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a3124ef89bf1c213d242704ce0ebe1cd61960cb2 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8a2357fd1e9563c1e55067ee3f01bd15939f4b6d | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/88ac753c406a46e684600d584d74da5afdd0ba2c | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b50cbd5d145ff54c7fe21413514a144b06b32247 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/39d2d7404ad079930c98aaab6330188151c09926 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3c9c8cd695492205873c0a71dc7a931c08c3f0eb | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d77870dc81fe8977b02caa911d0f875cfe0704b | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5c60aebc29f95aad7e5d5eae235069054633e083 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a1fde91481f1db2b20c3adaa883251b18811a2f5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/686d21a51593d54cfbedb5b1e3f803301c8c9fff | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b8aacfa03c18c7164cc5200cccc6f0d92ef129ba | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8bb899ca3cfa31bceab45e7d5b71d960bfba6235 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/23b19f55bde324cfc4a73c77059fb6006e7c85bd | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ffc5e6bf1b83ac8c36efdffc528b04bcad41d383 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/54ad3ffa307b969a16b662bb4ce68b1edf30fe4d | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/13052a52aa3d251aa7cbe76cafb5ae30466fe2b7 | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fec563e51b09edebf21d1cc8d4865873272a93cc | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c1eb89d07d76e896b7dea6078a5ad707b63d7ef6 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b17f73c98fcaf7e6db4146237f759cde47bfb66 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c7a9e793e07c32678e7240700f2c289563d97b93 | armeb | kmod-29 | NOK | http://autobuild.buildroot.net/results/e5bdd8a04d845667f4234867625c3d8e482b3e21 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/54ba419e9a395b3397a31dbac624686ed8c23c97 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/3a2088e6a9511437696aaf604e9e7a0480941885 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/496f1455eca76e3c25ab40f05f82cf7f3930f41c | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/ff3adde0bc617a5e0c709eaba6f904f61c384487 | sh4aeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/35293170afdad574fdbabf4ca317826643aabd0a | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cd727150088b801ea630c5db65b918266690eddc | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d001c552082b5cea1d58da24b2d6fad676b8f73b | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/24ad8dbdae9e58016f0cd849d56004abb79b0446 | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9dd8462de339ba04cc5b7828b3501de533ae55d0 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/eea02541c36f9f342a640808c4dd434aff945c20 | microblaze | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/658207f906337f1b2acf1e77403263a1d3639de1 | powerpc | libg7221-dbfc29d4806ecdace5... | NOK | http://autobuild.buildroot.net/results/39fb17691dcbdd34f6850451c29c3ba0d2385ef3 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/544730b0c72f398f81e69a74c8441777d181e0a5 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6de051b3f1a48e2bad89d058707e2f3f213f81b8 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/a41f670ac2f569e004996f6a1f9b4665bfca09df | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2b9d050129d792c5ac302b4b676db95d23a35b48 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/d50ba2058d4deb3cd10ba9d8a0b9c6effc862a5a | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5cb557517567723dcd3401470b96d58935886cda | ORPH arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87017ffc3d8830895bb711dc571e3f25bac60ab2 | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/cd40d43ec039a92b9ec78fe5a4470a4f710315ab | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e584fa108007f02a91c7e98bd2ec626f647db86d | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2344c8ff628044bf59d1383927dc71df924a5739 | sh4aeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8624e353ba197666dbd1126b95bd8615e6ca0c52 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ce9484c822024aaadd4a04d2819bf75a0c12c8b | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2b3e86e9bf1b834adc1853cd45d07549e10ebf33 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/71b01cdba5987edfeebb5d51d01621b8d1532307 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e0d87bf16ff35d534e178f645483e7af89328b55 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e0c78e59eab0d253cc3b417d7a0dce5f697a8b98 | sh4a | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/812e9effda1c64c6be3d0e22bf122f7304fb468b | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7dbbed8c14a8bc9f3fa80d7b0d984bb1750f10a5 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/84978fee7bdebd660fa3c664067585833a72f3d5 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b91dd6d2c3fe8a32ad33e9f4d2b75e47ab799ece | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2c8f4713e3c22d6b4538b8babc3b9f1702821610 | arceb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/0ec73f00c3eef70817e9974523eecdf43baa1bb3 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/94e42938a868b9c02fd25af1a326681ef4c9eff3 | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/801caa443816428d779cd715c3b3868db8e09bf7 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e3bb2c9b8c8f96b4b6e1d2c17db598ffcb57e222 | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/e106515860eaa89f2d8296bcc703a4b37c87c90b | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d4adb2f659085c329e948fee4c12475b42984ac | ORPH mipsel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/bfc525e6f5dcdabe003c6f7d0223b5f89eed8c02 | sparc64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/50516b95f5a9d90d26f1ce022d25349ccd3fa796 | or1k | log4cplus-2.0.8 | NOK | http://autobuild.buildroot.net/results/01bdb21462d315229cc0a1529a1d207eeda6f262 | ORPH sh4 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/02cec4c9a33f29ac584653b856f3569da0269309 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/626da8961851e08f0721237428541a5735f80dfa | microblaze | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/da203deb2617e2d32a4f3b0c433c55bab9f94469 | x86_64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/084c50eb26dc09213c28134a98a25e5d4c2c0fc6 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/1adc41e2aa9e8902f871f83fb46097b7759c6bed | ORPH x86_64 | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/4f29c5e663b5d01af20d671baf6504332b8c1f7b | m68k | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/8ce521a3020268fb780e079147d60ab9b364e96e | ORPH sparc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/55c6109a553a7adc1843c89cec8f015e02d085f9 | ORPH mips | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/144659a7f6678fca543d017e1595897c91379374 | aarch64_be | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/46f76d1893d42d74443d5b7b0145566d6b271a6b | powerpc64le | pcre2-10.40 | NOK | http://autobuild.buildroot.net/results/50b0f8bd22853c1852ed718328606addf7753134 | ORPH arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7b4dc1a5c14073bf683e24bfeb2510f76b33864c | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/54360d104bcfa5bbeaa2fbba0a52c4bf61251dce | aarch64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e45ee1d38d1f72b2200b35bda0f69dbe25e1b3e2 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/456c0d26f539a676221868058689c920b04a1e5c | mips64 | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/fe94e967da34c7e88c3426647b1730c675b34d70 | sparc | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/14264013b74ee6161ae27189adb2894c7e326fea | ORPH xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/cb32cd5232cb8e2632854af79a5252c5977ba214 | riscv32 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/40779f5abb10d0f59a919d6207918714131cdb71 | sh4aeb | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/c7b08c10b407b12183d3366a6047a401ad7f5c9a | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/380a64dfa48b020dbc3d3c1be111a5d5afedde15 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/347af4dd30f61835f1cfb04a4ade9b937e40ee43 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c79ffe229b5d7c60f368d30e4c95dac4153d4ec6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6e442d500e6bd38c69a74b6264a51842fe01d756 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a375d27e5fe965a1ad7730f51eb10f5cea9a31b5 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0d529cc2277e93db15e51b97d0e843dd11d63b27 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/07565092a360991f88e4e68d0291f4e7ad561165 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6e7ce6e307ca36f93021944b4d2354318e83eedf | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9082b9e79667e4ecc9140a81566fbc05f869a13d | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/910462427aa30ab7fa52dc84cd7763d064596bf9 | ORPH sh4aeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/31fae9c858be2beb69d0bf534dc88cf6ff58b48b | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/961028e5cc3db24c1ca954ce0507683bcd11d24e | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/731aaed149d9ab334e5603c831daffffd49b57ae | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/890f650043d0e911c4042bc6d7625a4d4db8bbee | microblazeel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b692cd361263c3b9797ee6e1d0d17c3360a4da10 | aarch64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/189c7b7ad74cf35f11ad65684c3705b24a04163a | arceb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/dcc8f9dfcf65cd93f328a101e47424e34ea920df | ORPH sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/c35d6f05fcd60f0aefe2f98c72c6054ee68e6e9c | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/4c15633dbee2100f3266b95144284560502e935f | or1k | unknown | NOK | http://autobuild.buildroot.net/results/c92f79f51381b116b7cc77c946795e9057e3ac1c | arceb | unknown | NOK | http://autobuild.buildroot.net/results/e2c5d53ecd9025a93c097fb13dc7d3479f41c7d4 | sh4a | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/3054a7f70ab8903403592a842fa4155f005484bb | ORPH arm | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/40cb178ae900aefe755b0a40ba258f939d526e0e | mips64el | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/b2aa8d5204b5295dc123657e11ed559e3a5a8d5c | or1k | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/819dc71268ea0344e527ecc2c26c12154f40486e | armeb | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/15fe86d5bc253f206aa54e0ce3f4cc6f0f540dfe | ORPH microblaze | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/d480378bfc172c7196e2980b3921420036391364 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e2029d5adbc676209c2ed15dc796234eb4a9266f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/811e8348f42c86777e92805b0092c383ab5f3aa0 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f2e6cbf56dfea8b07b7c4fe6073035649eac8b5a | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/444fbb51d19c75ff6607d401ebade9d60d9aaabb | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- ndisc6-1.0.5 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/7ad5dc9e0d517cfd13cdd52976451ca74c03759a | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-go-1.18.6 | 2 openssh-legal-info | 2 /home/buildroot/autobuild/i... | 1 host-rust-1.62.0 | 1 libglib2-2.72.3 | 1 luvi-2.13.0 | 1 mpir-3.0.0 | 1 open62541-v1.3.2 | 1 quickjs-2021-03-27 | 1 unknown | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblazeel | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b8538bf4bc3ba2632ba62f7735272d789cb7fb4f | i686 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/767ea17e4a10dc3e6e3b857713ce8faaddbabe84 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/e555b15b9c672211bea97c1b57d088995a9246d1 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a082c2fecf9ecf161015910fe7bab110df239762 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/06674219e8c4143fa7455be08842585c5493d40d | mips | luvi-2.13.0 | NOK | http://autobuild.buildroot.net/results/fa4f31d728cab8b5234ecdb86dbd0612baa390d2 | ORPH arm | mpir-3.0.0 | NOK | http://autobuild.buildroot.net/results/4c89e81b6439e62925424c31368c88049be5f7b1 | microblaze | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/b9cfafdd59d5dc63d1ac231813d174120a4c6e19 | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/39ddcfd5b7f6565854a1dfbd10f62d00ac00fa54 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/e470d130353dd183a7315660c2f3e816e8dd2561 | ORPH microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/21b2bc43c3711e792ff9201ebe4bec1175f54b9b | arc | unknown | NOK | http://autobuild.buildroot.net/results/4ce3459bb64d906928b56c37ca6bff9777b674d8 | s390x | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c4fcdb0f753150c30e50a316bc51e4a76a1021fa | ORPH -- http://autobuild.buildroot.net From moritz at h6t.eu Fri Oct 21 06:48:18 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Fri, 21 Oct 2022 08:48:18 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> Message-ID: <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Am 20.10.22 um 00:12 schrieb James Hilliard: > On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > wrote: >> From: Moritz Bitsch >> >> The cargo --release flag is used to create optimized builds, not supplying >> --release has major performance implications. > Is there an env variable we can use to set this instead? > > Some packages use cargo without the cargo infrastructure, for example > we have a number of pyo3(https://pyo3.rs/) based packages that use the > cargo env but not the cargo build commands from here. I could not find any env variable for switching profiles. I had a look at python-rtoml, and the used setuptools-rust: supplying --debug to the "setup.py build" removes the --release flag from the cargo invocation. >> Signed-off-by: Moritz Bitsch >> --- >> package/pkg-cargo.mk | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >> index f7e3f39503..e0556252fa 100644 >> --- a/package/pkg-cargo.mk >> +++ b/package/pkg-cargo.mk >> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >> $$($(2)_CARGO_ENV) \ >> cargo build \ >> --offline \ >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >> --manifest-path Cargo.toml \ >> --locked \ >> $$($(2)_CARGO_BUILD_OPTS) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Fri Oct 21 07:44:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 21 Oct 2022 09:44:18 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221021094418.2f6ecae1@windsurf> Hello Oguz, On Wed, 19 Oct 2022 23:57:39 +0200 Oguz Ozhan wrote: > Signed-off-by: Oguz Ozhan Thanks a lot for your patch series. However, all commit logs are empty. What is the rationale/motivation for the changes in this patch series? Why is pytest better than nose2? Could you send a new iteration with a detailed commit log for each commit that explains the motivation for the change, and also describes the change itself, especially in PATCH 2/3, where test cases see changes. BTW, these changes in test cases could be done in a separate preparation commit, as they would still work with nose2 I believe. Also another concern is that the series is not really bisectable, but admittedly I'm not sure it's easy to achieve without doing all the changes in one single patch. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From b.bilas at grinn-global.com Fri Oct 21 08:58:58 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Fri, 21 Oct 2022 10:58:58 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-16 In-Reply-To: <20221017053654.7D60A1BBFC4@server220076.nazwa.pl> References: <20221017053654.7D60A1BBFC4@server220076.nazwa.pl> Message-ID: <51bbccf8-bbc4-91d5-95eb-56ce8b077d65@grinn-global.com> Hello Thomas, On 17.10.2022 07:36, Thomas Petazzoni wrote: > Hello, > > Outdated packages > ================= > > This is the list of packages for which a new version has been detected > and for which you are a registered developer. Please help us improving > the quality of Buildroot by bumping these packages to their latest > version. > > name | found by | link to release-monitoring.org | version | upstream > -------------------------------+----------+----------------------------------------------+--------------+-------------- > python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 > ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 here you go: https://patchwork.ozlabs.org/project/buildroot/patch/20221020211313.874624-2-b.bilas at grinn-global.com/ https://patchwork.ozlabs.org/project/buildroot/patch/20221020211313.874624-1-b.bilas at grinn-global.com/ Best Bartek > > Thanks for your contribution to Buildroot! > From oguz.ozhan at mind.be Fri Oct 21 09:15:29 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:29 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile Message-ID: <20221021091531.2989489-1-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 Signed-off-by: Oguz Ozhan --- support/docker/Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile index f54c31b54a..fd1527b1f9 100644 --- a/support/docker/Dockerfile +++ b/support/docker/Dockerfile @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ mercurial \ openssh-server \ python3 \ + python3-pip \ python3-flake8 \ - python3-nose2 \ python3-pexpect \ python3-pytest \ qemu-system-arm \ @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ apt-get -y autoremove && \ apt-get -y clean +# To be able to run tests in parallel +RUN pip install pytest-parallel + # To be able to generate a toolchain with locales, enable one UTF-8 locale RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ /usr/sbin/locale-gen -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:15:31 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:31 +0200 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221021091531.2989489-3-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 - Changes in this patch: - the sed command was fine filtering the tests list with nose2 output but removing all operating on pytest output. With pytest no fine filtering is required to get the test names in correct format. Signed-off-by: Oguz Ozhan --- support/scripts/generate-gitlab-ci-yml | 2 -- 1 file changed, 2 deletions(-) diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml index aa43aac019..bb4dcbbb22 100755 --- a/support/scripts/generate-gitlab-ci-yml +++ b/support/scripts/generate-gitlab-ci-yml @@ -31,7 +31,6 @@ gen_tests() { defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort) ) @@ -80,7 +79,6 @@ gen_tests() { ;; (*-tests.*) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort \ | grep "^${CI_COMMIT_REF_NAME##*-}") ) -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:15:30 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:30 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221021091531.2989489-2-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 - Changes in this patch: - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests - nose2 plugins removed which are not required anymore - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest Signed-off-by: Oguz Ozhan --- support/testing/conf/unittest.cfg | 3 -- support/testing/run-tests | 28 ++++++++++------- support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ 3 files changed, 36 insertions(+), 35 deletions(-) diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg index 4f516fb80a..0dfffcfbda 100644 --- a/support/testing/conf/unittest.cfg +++ b/support/testing/conf/unittest.cfg @@ -1,5 +1,2 @@ -[unittest] -plugins = nose2.plugins.mp - [multiprocess] always-on = True diff --git a/support/testing/run-tests b/support/testing/run-tests index bf40019362..f887bc6715 100755 --- a/support/testing/run-tests +++ b/support/testing/run-tests @@ -4,10 +4,16 @@ import multiprocessing import os import sys -import nose2 +import pytest from infra.basetest import BRConfigTest +class PyTestCollector: + def __init__(self): + self.collected = [] + def pytest_collection_modifyitems(self, items): + for item in items: + self.collected.append(item.nodeid) def main(): parser = argparse.ArgumentParser(description='Run Buildroot tests') @@ -42,12 +48,10 @@ def main(): BRConfigTest.logtofile = False if args.list: - print("List of tests") - nose2.discover(argv=[script_path, - "-s", test_dir, - "-v", - "--collect-only"], - plugins=["nose2.plugins.collect"]) + collect_plugin = PyTestCollector() + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) + for nodeid in collect_plugin.collected: + print(nodeid) return 0 if args.download is None: @@ -106,15 +110,15 @@ def main(): return 1 BRConfigTest.timeout_multiplier = args.timeout_multiplier - nose2_args = ["-v", - "-N", str(args.testcases), - "-s", test_dir, + pytest_args = ["--workers", str(args.testcases), + "--rootdir", test_dir, "-c", os.path.join(test_dir, "conf/unittest.cfg")] if args.testname: - nose2_args += args.testname + pytest_args += args.testname + + pytest.main(pytest_args) - nose2.discover(argv=nose2_args) if __name__ == "__main__": diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py index 692291267e..d2390cccf1 100644 --- a/support/testing/tests/fs/test_iso9660.py +++ b/support/testing/tests/fs/test_iso9660.py @@ -25,7 +25,7 @@ BASIC_CONFIG = \ """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): img = os.path.join(builddir, "images", "rootfs.iso9660") if efi: efi_img = os.path.join(builddir, "images", "OVMF.fd") @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): return exit_code -def test_touch_file(emulator): +def do_test_touch_file(emulator): _, exit_code = emulator.run("touch test") return exit_code @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) self.emulator.stop() - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:18:06 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:18:06 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221021094418.2f6ecae1@windsurf> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> <20221021094418.2f6ecae1@windsurf> Message-ID: Hi Thomas. Thanks a lot for your comments. I inserted more information in the commit logs and re-sent the patches. KR. Oguz On Fri, Oct 21, 2022 at 9:44 AM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > Hello Oguz, > > On Wed, 19 Oct 2022 23:57:39 +0200 > Oguz Ozhan wrote: > > > Signed-off-by: Oguz Ozhan > > Thanks a lot for your patch series. However, all commit logs are empty. > What is the rationale/motivation for the changes in this patch series? > Why is pytest better than nose2? Could you send a new iteration with a > detailed commit log for each commit that explains the motivation for > the change, and also describes the change itself, especially in PATCH > 2/3, where test cases see changes. BTW, these changes in test cases > could be done in a separate preparation commit, as they would still > work with nose2 I believe. > > Also another concern is that the series is not really bisectable, but > admittedly I'm not sure it's easy to achieve without doing all the > changes in one single patch. > > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.richter at ptwdosimetry.com Fri Oct 21 12:10:58 2022 From: simon.richter at ptwdosimetry.com (Richter Simon) Date: Fri, 21 Oct 2022 12:10:58 +0000 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221020202557.GA2992523@scaer> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> <20221020202557.GA2992523@scaer> Message-ID: Hi Yann, Am 20.10.22 um 22:25 schrieb Yann E. MORIN: > I see all the above use git repositories directly, so I suspect this is > going to cause explicit git-clone + build (that's OK). However, I was > also wondering if one could have a "registry" like crates.io, either > internal to a company, or another public resource elsewhere, and how > that would work... It is possible to use an own registry, yes, but i did not use that yet. However, i checked the code of cargo vendor and have seen that alternative registries are handeled. That means that `cargo vendor` should print the needed config and we would use it with this patch. As i have understood it so far, a corresponding entry would look like this: [crates-io] replace-with = "vendored-sources" [my-own-registry] replace-with = "vendored-sources" [vendored-sources] directory = "vendor" > Yes, I was wondering if there was a publicly visible package that we > could cary in Buildroot, so that we know the feature would be regularly > exercised. You pointed to conduit: it wouldbe good to have it packaged > in Buildrooot. I can try to do that. But that should be done in a different patch i think? > Please, also note that this has the potential to generate different > hashes, so please check existing cargo packages to see what breaks. I did, and with my last suggestion (using cargo and tee) those packages broke. The problem is that `cargo vendor` outputs a preceding newline that must be removed. I came up with this: cargo vendor \ --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ --locked VENDOR \ | tail --lines=+2 | tee .cargo/config This removes the first (and empty) line. With this, all packages i checked were fine. These were: - bat - dust - hyperfine - ripgrep - tealdeer - python-rtoml - python-orjson - python-cryptography - host-python-maturin I hope i've got all. > Or we can wait for until something actually needs it, so that we do have > an actual case to look at. > >>> Can we simply append to the file rather than overwrite it, i.e.: >>> .... >> .cargo/config.toml >> >> Unfortunately it is not that simple because of two reasons: >> >> 1. cargo looks for a .cargo/config or (up from cargo 1.39) a >> .cargo/config.toml file for configuration. If both files exist, cargo uses >> .cargo/config and ignores the .cargo/config.toml file. >> >> 2. if configuration entries for vendoring already exist in a configuration, >> it is not allowed to add them again. Cargo will not build the project if a >> corresponding entry exists more than once. >> >> The first case would be quiet easy to address but the second one would >> need some sort of merging. > > Yes, so that all calls for waiting until we do have an actual issue. > >> So, speaking for this patch, i would keep the current behavior "overwrite >> every possibly existing config with the vendoring information". > > Yes, because that has so far not caused an issue (at least that we > noticed), so this means it is not an actual problem. Agreed. If you agree so far, I would send the new version of the patch. Regards, Simon From davidh at netacquire.com Fri Oct 21 15:29:00 2022 From: davidh at netacquire.com (David Hauck) Date: Fri, 21 Oct 2022 15:29:00 +0000 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> References: <20221009153521.12444-1-romain.naour@gmail.com> <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> Message-ID: Hi there, Not sure if this is the correct place to follow-up but I'm wondering why this patch/backport hasn't yet been committed to 'master' (these x86_64 'glibc' autobuild failures appear to still be occurring)? Regards, -David On Monday, October 10, 2022 12:35 AM, buildroot On Behalf Of Romain Naour wrote: > Hello James, > > Le 10/10/2022 ? 01:37, James Hilliard a ?crit : >> On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: >>> >>> Backport upstream commit for x86_64 builds with -Os reported by [1]. >>> >>> [1] >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fso >>> urceware.org%2Fbugzilla%2Fshow_bug.cgi%3Fid%3D29576&data=05%7C01% >>> 7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e1 >>> 8eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CT >>> WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC >>> I6Mn0%3D%7C3000%7C%7C%7C&sdata=kM71qKfb2s%2FJpdiq7raXX5QGiCZSgYG5 >>> %2BF7sDJsivHs%3D&reserved=0 >>> >>> Fixes: >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fgi >>> tlab.com%2Fbuildroot.org%2Fbuildroot%2F-%2Fjobs%2F3134229902&data >>> =05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777 >>> %7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn >>> known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha >>> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=nLa36c%2FtkIs3S6dkSlmJ2QA >>> 6C4sHpmeg5ZxrXheTjes%3D&reserved=0 >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fgi >>> tlab.com%2Fbuildroot.org%2Fbuildroot%2F-%2Fjobs%2F3134229956&data >>> =05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777 >>> %7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn >>> known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha >>> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=z7VVflV9eoBkHtPjL6DF8qQnC >>> %2FyBUmXxARjDgo6DErA%3D&reserved=0 >> >> I think this also fixes an issue in autobuilders, see: >> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fpat >> chwork.ozlabs.org%2Fproject%2Fbuildroot%2Fpatch%2F20220927031702.29184 >> 14-1-james.hilliard1%40gmail.com%2F&data=05%7C01%7Cdavidh%40netacq >> uire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eede24cedbdab4935 >> 5e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi >> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7 >> C%7C&sdata=%2Fk1U8hJG0c8ms2%2F0zEeQu2Z8PQA%2BvSVoGTjO50qMfIo%3D&am >> p;reserved=0 > > Sorry I missed it in the patchwork it was on the second page already... > >> >> https://usg02.safelinks.protection.office365.us/?url=http%3A%2F%2Fauto >> build.buildroot.net%2Fresults%2F5b4%2F5b442f95587ddc65a995bbd9e310c88a >> 66c55b1f&data=05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434e >> b90108daaa91f777%7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C63800984 >> 1155558315%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzI >> iLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=rn7GhsxgoxAG >> Qofv375ApEGTHMKtCiAz4s6e10yLe9A%3D&reserved=0 >> >>> >>> Signed-off-by: Romain Naour >> >> Reviewed-by: James Hilliard >> >>> --- >>> .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ >>> 1 file changed, 48 insertions(+) >>> create mode 100644 >>> package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> >>> diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> new file mode 100644 >>> index 0000000000..4470324f1c >>> --- /dev/null >>> +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> @@ -0,0 +1,48 @@ >>> +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 >>> +2001 >>> +From: Adhemerval Zanella Netto >>> +Date: Wed, 21 Sep 2022 10:51:08 -0300 >>> +Subject: [PATCH] x86: Fix -Os build (BZ #29576) >>> + >>> +The compiler might transform __stpcpy calls (which are routed to >>> +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy >>> +multiarch implementation does not build any working symbol due >>> +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). >>> + >>> +Checked on x86_64-linux-gnu. >>> +Reviewed-by: Carlos O'Donell >>> +Tested-by: Carlos O'Donell >>> + >>> +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) >> >> This is probably better than mine since I had applied from patchwork >> before it was applied upstream. > > Yes maybe... even it doesn't come from the 2.36 stable branch. > I replied on the bug report, so the commit may be backported soon. > > Best regards, > Romain > >> >>> +Signed-off-by: Romain Naour >>> +--- >>> + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ >>> + 1 file changed, 18 insertions(+) >>> + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S >>> + >>> +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +b/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +new file mode 100644 >>> +index 0000000000..19439c553d >>> +--- /dev/null >>> ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +@@ -0,0 +1,18 @@ >>> ++/* Copyright (C) 2022 Free Software Foundation, Inc. >>> ++ This file is part of the GNU C Library. >>> ++ >>> ++ The GNU C Library is free software; you can redistribute it and/or >>> ++ modify it under the terms of the GNU Lesser General Public >>> ++ License as published by the Free Software Foundation; either >>> ++ version 2.1 of the License, or (at your option) any later version. >>> ++ >>> ++ The GNU C Library is distributed in the hope that it will be useful, >>> ++ but WITHOUT ANY WARRANTY; without even the implied warranty of >>> ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >>> ++ Lesser General Public License for more details. >>> ++ >>> ++ You should have received a copy of the GNU Lesser General Public >>> ++ License along with the GNU C Library; if not, see >>> ++ >>> ++ >> ++ 2Fwww.gnu.org%2Flicenses%2F&data=05%7C01%7Cdavidh%40netacquire >>> ++ .com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eede24cedbdab4935 >>> ++ 5e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbGZsb3d8eyJW >>> ++ IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3 >>> ++ 000%7C%7C%7C&sdata=HK7%2FnPI%2Fo9tp%2FG2N3gDgo%2BIo5vMUfQdrh7d >>> ++ 1JIPRYgU%3D&reserved=0>. */ >>> ++ >>> ++#include "../strcpy.S" >>> +-- >>> +2.34.3 >>> + >>> -- >>> 2.34.3 >>> >>> _______________________________________________ >>> buildroot mailing list >>> buildroot at buildroot.org >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fli >>> sts.buildroot.org%2Fmailman%2Flistinfo%2Fbuildroot&data=05%7C01%7 >>> Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18 >>> eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTW >>> FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI >>> 6Mn0%3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2 >>> B6mrl0m6txsY5g%3D&reserved=0 >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Flis >> ts.buildroot.org%2Fmailman%2Flistinfo%2Fbuildroot&data=05%7C01%7Cd >> avidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eed >> e24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbG >> Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% >> 3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2B6mrl0 >> m6txsY5g%3D&reserved=0 > _______________________________________________ buildroot mailing list buildroot at buildroot.org https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Flists.buildroot.org%2Fmailman %2Flistinfo%2Fbuildroot&data=05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb9 0108daaa91f777%7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% 3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2B6mrl0m6txsY5g%3 D&reserved=0 External Email Warning! Use caution before clicking links or opening attachments. From yann.morin.1998 at free.fr Fri Oct 21 16:31:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 18:31:33 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> <20221020202557.GA2992523@scaer> Message-ID: <20221021163133.GO2503@scaer> Simon, All, On 2022-10-21 12:10 +0000, Richter Simon spake thusly: > Am 20.10.22 um 22:25 schrieb Yann E. MORIN: > > I see all the above use git repositories directly, so I suspect this is > > going to cause explicit git-clone + build (that's OK). However, I was > > also wondering if one could have a "registry" like crates.io, either > > internal to a company, or another public resource elsewhere, and how > > that would work... > > It is possible to use an own registry, yes, but i did not use that yet. OK, that's fine! > > Yes, I was wondering if there was a publicly visible package that we > > could cary in Buildroot, so that we know the feature would be regularly > > exercised. You pointed to conduit: it wouldbe good to have it packaged > > in Buildrooot. > I can try to do that. But that should be done in a different patch i think? Yes, as a followup patch, that way you provide the new feature, and you show how it is used. And we get a new interesting package! :-) > > Please, also note that this has the potential to generate different > > hashes, so please check existing cargo packages to see what breaks. > I did, and with my last suggestion (using cargo and tee) those packages > broke. The problem is that `cargo vendor` outputs a preceding newline > that must be removed. > I came up with this: > > cargo vendor \ > --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > --locked VENDOR \ > | tail --lines=+2 | tee .cargo/config Now, one last issue: if the 'cargo' call fails, the script won't fail, because cargo is part of a pipe. The script is already "set -e", but we also need "set -o pipefail". > This removes the first (and empty) line. > > With this, all packages i checked were fine. OK, so don't forget to mention that in your new commit log. Also, the rationale that we can change it, is that it produces the exact same output that we do, and if for some package it would not generate the same output, that package was not working anyway because it was missing parts of its vendored sources anyway. So, that can't regress. > These were: > - bat > - dust > - hyperfine > - ripgrep > - tealdeer > - python-rtoml > - python-orjson > - python-cryptography > - host-python-maturin > > I hope i've got all. You missed: host-sentry-cli (is a host-cargo-package). > If you agree so far, I would send the new version of the patch. Yes, with all we discussed, it looks in good way. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 21 16:41:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 12:41:48 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Message-ID: On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > > Am 20.10.22 um 00:12 schrieb James Hilliard: > > > On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > > wrote: > >> From: Moritz Bitsch > >> > >> The cargo --release flag is used to create optimized builds, not supplying > >> --release has major performance implications. > > Is there an env variable we can use to set this instead? > > > > Some packages use cargo without the cargo infrastructure, for example > > we have a number of pyo3(https://pyo3.rs/) based packages that use the > > cargo env but not the cargo build commands from here. > I could not find any env variable for switching profiles. > > I had a look at python-rtoml, and the used setuptools-rust: supplying > --debug to > the "setup.py build" removes the --release flag from the cargo invocation. Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, we also have maturin which is pep517 based. > >> Signed-off-by: Moritz Bitsch > >> --- > >> package/pkg-cargo.mk | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >> index f7e3f39503..e0556252fa 100644 > >> --- a/package/pkg-cargo.mk > >> +++ b/package/pkg-cargo.mk > >> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >> $$($(2)_CARGO_ENV) \ > >> cargo build \ > >> --offline \ > >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >> --manifest-path Cargo.toml \ > >> --locked \ > >> $$($(2)_CARGO_BUILD_OPTS) > >> -- > >> 2.37.3 > >> > >> _______________________________________________ > >> buildroot mailing list > >> buildroot at buildroot.org > >> https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Fri Oct 21 17:05:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 11:05:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.10.8 Message-ID: <20221021170536.3408570-1-james.hilliard1@gmail.com> License hash changed due to links in license text being changed from http to https: https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 Signed-off-by: James Hilliard --- package/python3/python3.hash | 4 ++-- package/python3/python3.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python3/python3.hash b/package/python3/python3.hash index c625e7a8ea..f9b8e2ec8d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6eed8415b7516fb2f260906db5d48dd4c06acc0cb24a7d6cc15296a604dcdc48 Python-3.10.7.tar.xz -sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE +sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz +sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index b7df26781a..4131941e11 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -5,7 +5,7 @@ ################################################################################ PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).7 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others -- 2.34.1 From peter at korsgaard.com Fri Oct 21 18:47:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/rtl_433: add RTL_433_CPE_ID_VENDOR In-Reply-To: <20221020162856.201351-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 18:28:56 +0200") References: <20221020162856.201351-1-fontaine.fabrice@gmail.com> Message-ID: <8735bh57zt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:47:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/squashfs: security bump to version 4.5.1 In-Reply-To: <20221020170233.230696-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 19:02:33 +0200") References: <20221020170233.230696-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t93tf3.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2021-40153 > - CVE-2021-41072 which is a writing outside of destination exploit, has > been fixed. > - Drop patch (already in version) > - Set INSTALL_MANPAGES_DIR to an empty value to disable build and > install of man pages which were added with > https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b > https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:48:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:11 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/zlog: bump to version 1.2.16 In-Reply-To: <20221020163312.203021-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 18:33:12 +0200") References: <20221020163312.203021-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3x3tec.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://github.com/HardySimpson/zlog/releases/tag/1.2.16 > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Drop ZLOG_IGNORE_CVES Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:49:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:49:01 +0200 Subject: [Buildroot] [PATCH] package/python-esptool: bump version to 4.3 In-Reply-To: <20221020211313.874624-1-b.bilas@grinn-global.com> (Bartosz Bilas's message of "Thu, 20 Oct 2022 23:13:12 +0200") References: <20221020211313.874624-1-b.bilas@grinn-global.com> Message-ID: <87pmel3tcy.fsf@dell.be.48ers.dk> >>>>> "Bartosz" == Bartosz Bilas writes: > Signed-off-by: Bartosz Bilas Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:49:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:49:05 +0200 Subject: [Buildroot] [PATCH] package/ttyd: bump to version 1.7.2 In-Reply-To: <20221020211313.874624-2-b.bilas@grinn-global.com> (Bartosz Bilas's message of "Thu, 20 Oct 2022 23:13:13 +0200") References: <20221020211313.874624-1-b.bilas@grinn-global.com> <20221020211313.874624-2-b.bilas@grinn-global.com> Message-ID: <87lep93tcu.fsf@dell.be.48ers.dk> >>>>> "Bartosz" == Bartosz Bilas writes: > Signed-off-by: Bartosz Bilas Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:51:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:51:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.10.8 In-Reply-To: <20221021170536.3408570-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 21 Oct 2022 11:05:36 -0600") References: <20221021170536.3408570-1-james.hilliard1@gmail.com> Message-ID: <87h6zx3t81.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > License hash changed due to links in license text being changed from > http to https: > https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 > Signed-off-by: James Hilliard The announcement mentions a number of security fixes, so I've marked it as a security bump and committed, thanks. https://blog.python.org/2022/10/python-versions-3108-3915-3815-3715-now.html -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:47:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:57 +0200 Subject: [Buildroot] [git commit] package/zlog: bump to version 1.2.16 Message-ID: <20221021185221.4DA3E86F48@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aee1cc302f6da050b198ea63a7c78e62579aed97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...fer-overflow-at-zlog_conf_build_with_file.patch | 25 ---------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 5 +---- 3 files changed, 2 insertions(+), 30 deletions(-) diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..329f2cfe2c 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,16 +4,13 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING ZLOG_CPE_ID_VENDOR = zlog_project ZLOG_INSTALL_STAGING = YES -# 0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch -ZLOG_IGNORE_CVES += CVE-2021-43521 - define ZLOG_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE1) CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" \ -C $(@D) all From peter at korsgaard.com Fri Oct 21 18:46:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:46:11 +0200 Subject: [Buildroot] [git commit] package/rtl_433: add RTL_433_CPE_ID_VENDOR Message-ID: <20221021185221.3953786F46@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69a2a96b53f7d7552e9dd021ddd748bad74768c2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/rtl_433/rtl_433.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rtl_433/rtl_433.mk b/package/rtl_433/rtl_433.mk index 8326caedb2..74a0b54a3d 100644 --- a/package/rtl_433/rtl_433.mk +++ b/package/rtl_433/rtl_433.mk @@ -8,6 +8,7 @@ RTL_433_VERSION = 21.12 RTL_433_SITE = $(call github,merbanan,rtl_433,$(RTL_433_VERSION)) RTL_433_LICENSE = GPL-2.0+ RTL_433_LICENSE_FILES = COPYING +RTL_433_CPE_ID_VENDOR = rtl_433_project # Force Release build to remove ASAN. RTL_433_CONF_OPTS = \ From peter at korsgaard.com Fri Oct 21 18:48:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:42 +0200 Subject: [Buildroot] [git commit] package/python-esptool: bump version to 4.3 Message-ID: <20221021185221.56E5A86F49@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9454960cd11ca728ab148551064b32f45aa54d9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bartosz Bilas Signed-off-by: Peter Korsgaard --- package/python-esptool/python-esptool.hash | 4 ++-- package/python-esptool/python-esptool.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-esptool/python-esptool.hash b/package/python-esptool/python-esptool.hash index 4f19fbde41..7e523a7027 100644 --- a/package/python-esptool/python-esptool.hash +++ b/package/python-esptool/python-esptool.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/esptool/json -md5 60bf3a49a794ff5627552f642f28ea3d esptool-4.1.tar.gz -sha256 51a41655187780cb802a5827fab68a3db0d6206330560459c55fcf0e222f277f esptool-4.1.tar.gz +md5 973b63eac1391d3491846d8676c783e7 esptool-4.3.tar.gz +sha256 03d00312eef258baf83faefd0b912b2251dd0440242da9dcb1b18fe75ed614c3 esptool-4.3.tar.gz # Locally computed sha256 checksums sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/python-esptool/python-esptool.mk b/package/python-esptool/python-esptool.mk index 51bc563c5c..3f33fd7865 100644 --- a/package/python-esptool/python-esptool.mk +++ b/package/python-esptool/python-esptool.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ESPTOOL_VERSION = 4.1 +PYTHON_ESPTOOL_VERSION = 4.3 PYTHON_ESPTOOL_SOURCE = esptool-$(PYTHON_ESPTOOL_VERSION).tar.gz -PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/bb/d5/9d000803520b68fd9f6447cd7c15352a79984196f57f0519839b0f80fb8f +PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/5b/d7/0dae311a94a490d7b7af2f4fab079b34f6244c6129017997bc994f7b360b PYTHON_ESPTOOL_SETUP_TYPE = setuptools PYTHON_ESPTOOL_LICENSE = GPL-2.0+ PYTHON_ESPTOOL_LICENSE_FILES = LICENSE From peter at korsgaard.com Fri Oct 21 18:48:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:50 +0200 Subject: [Buildroot] [git commit] package/ttyd: bump to version 1.7.2 Message-ID: <20221021185221.600F786F4A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=86de66e444cda40e8d65cc401229628b48fe410a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bartosz Bilas Signed-off-by: Peter Korsgaard --- package/ttyd/ttyd.hash | 2 +- package/ttyd/ttyd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ttyd/ttyd.hash b/package/ttyd/ttyd.hash index 283288febf..a2a933b63a 100644 --- a/package/ttyd/ttyd.hash +++ b/package/ttyd/ttyd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 47bc98d43cf2060af06378a2113605b229c46895a391613bdaa5a1197bfe5d47 ttyd-1.7.0.tar.gz +sha256 edc44cd5319c0c9d0858081496cae36fc5c54ee7722e0a547dde39537dfb63de ttyd-1.7.2.tar.gz sha256 8b7e100f8311cb428c57609164d93099bada2599f948359045d1ac876a7a625b LICENSE diff --git a/package/ttyd/ttyd.mk b/package/ttyd/ttyd.mk index 7b582a696c..085511b5fd 100644 --- a/package/ttyd/ttyd.mk +++ b/package/ttyd/ttyd.mk @@ -4,7 +4,7 @@ # ################################################################################ -TTYD_VERSION = 1.7.0 +TTYD_VERSION = 1.7.2 TTYD_SITE = $(call github,tsl0922,ttyd,$(TTYD_VERSION)) TTYD_LICENSE = MIT TTYD_LICENSE_FILES = LICENSE From peter at korsgaard.com Fri Oct 21 18:46:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:46:22 +0200 Subject: [Buildroot] [git commit] package/squashfs: security bump to version 4.5.1 Message-ID: <20221021185221.438D886F47@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=49b11f5e787f68cc310e97a539ad7ed29b041919 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2021-40153 - CVE-2021-41072 which is a writing outside of destination exploit, has been fixed. - Drop patch (already in version) - Set INSTALL_MANPAGES_DIR to an empty value to disable build and install of man pages which were added with https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...id-use-of-INSTALL_DIR-for-symlink-targets.patch | 37 ---------------------- package/squashfs/squashfs.hash | 2 +- package/squashfs/squashfs.mk | 8 +++-- 3 files changed, 6 insertions(+), 41 deletions(-) diff --git a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch b/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch deleted file mode 100644 index 997719e63a..0000000000 --- a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch +++ /dev/null @@ -1,37 +0,0 @@ -From f5c908e92d4c055859be2fddbda266d9e3bfd415 Mon Sep 17 00:00:00 2001 -From: Patrick McCarty -Date: Mon, 26 Jul 2021 11:38:43 -0700 -Subject: [PATCH] Avoid use of INSTALL_DIR for symlink targets - -In case INSTALL_DIR is overridden with a staged install location, using -INSTALL_DIR for the symlink target path prefix will yield an incorrect location -for the final installation. - -Because the symlink itself is already installed to INSTALL_DIR, simply removing -the INSTALL_DIR prefix suffices as a fix. - -Note that using $DESTDIR/$INSTALL_DIR where appropriate can avoid this type of -issue, but that can be considered a future enhancement. - -Signed-off-by: Patrick McCarty -Upstream: f5c908e92d4c055859be2fddbda266d9e3bfd415 -Signed-off-by: Thomas Petazzoni ---- - squashfs-tools/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/squashfs-tools/Makefile b/squashfs-tools/Makefile -index f5a55f1..7262a2e 100755 ---- a/squashfs-tools/Makefile -+++ b/squashfs-tools/Makefile -@@ -406,5 +406,5 @@ install: mksquashfs unsquashfs - mkdir -p $(INSTALL_DIR) - cp mksquashfs $(INSTALL_DIR) - cp unsquashfs $(INSTALL_DIR) -- ln -fs $(INSTALL_DIR)/unsquashfs $(INSTALL_DIR)/sqfscat -- ln -fs $(INSTALL_DIR)/mksquashfs $(INSTALL_DIR)/sqfstar -+ ln -fs unsquashfs $(INSTALL_DIR)/sqfscat -+ ln -fs mksquashfs $(INSTALL_DIR)/sqfstar --- -2.31.1 - diff --git a/package/squashfs/squashfs.hash b/package/squashfs/squashfs.hash index 09a2bae364..13d5aed71f 100644 --- a/package/squashfs/squashfs.hash +++ b/package/squashfs/squashfs.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 b9e16188e6dc1857fe312633920f7d71cc36b0162eb50f3ecb1f0040f02edddd squashfs-4.5.tar.gz +sha256 277b6e7f75a4a57f72191295ae62766a10d627a4f5e5f19eadfbc861378deea7 squashfs-4.5.1.tar.gz # License files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squashfs/squashfs.mk b/package/squashfs/squashfs.mk index f64d441c9b..323908d94e 100644 --- a/package/squashfs/squashfs.mk +++ b/package/squashfs/squashfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUASHFS_VERSION = 4.5 +SQUASHFS_VERSION = 4.5.1 SQUASHFS_SITE = $(call github,plougher,squashfs-tools,$(SQUASHFS_VERSION)) SQUASHFS_LICENSE = GPL-2.0+ SQUASHFS_LICENSE_FILES = COPYING @@ -75,7 +75,8 @@ endef define SQUASHFS_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) $(SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin \ + INSTALL_MANPAGES_DIR="" install endef define HOST_SQUASHFS_BUILD_CMDS @@ -89,7 +90,8 @@ endef define HOST_SQUASHFS_INSTALL_CMDS $(HOST_MAKE_ENV) $(MAKE) $(HOST_SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin \ + INSTALL_MANPAGES_DIR="" install endef $(eval $(generic-package)) From peter at korsgaard.com Fri Oct 21 18:50:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:50:05 +0200 Subject: [Buildroot] [git commit] package/python3: security bump to version 3.10.8 Message-ID: <20221021185221.6958D86F46@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=72e8471b5cf4a011cd87692719bd4f69d9cc526c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-40674: bundled libexpat was upgraded from 2.4.7 to 2.4.9 which fixes a heap use-after-free vulnerability in function doContent - gh-97616: a fix for a possible buffer overflow in list *= int - gh-97612: a fix for possible shell injection in the example script get-remote-certificate.py(this issue originally had a CVE assigned to it, which its author withdrew) - gh-96577: a fix for a potential buffer overrun in msilib License hash changed due to links in license text being changed from http to https: https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 Signed-off-by: James Hilliard [Peter: mark as security bump] Signed-off-by: Peter Korsgaard --- package/python3/python3.hash | 4 ++-- package/python3/python3.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python3/python3.hash b/package/python3/python3.hash index c625e7a8ea..f9b8e2ec8d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6eed8415b7516fb2f260906db5d48dd4c06acc0cb24a7d6cc15296a604dcdc48 Python-3.10.7.tar.xz -sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE +sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz +sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index b7df26781a..4131941e11 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -5,7 +5,7 @@ ################################################################################ PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).7 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others From yann.morin.1998 at free.fr Fri Oct 21 18:58:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:58:22 +0200 Subject: [Buildroot] [git commit] package/gpsd: drop legacy cleanup Message-ID: <20221021185834.CC94886F52@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b3b962c93579f02775fbf057f317bcd58772131e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since gpsd-3.22, the systemd service files no longer contain hard-coded paths to /usr/local/, but use @SBINDIR@ which is replaced appropriately at build time, and contains the correct path. Drop the legacy fixup now. Signed-off-by: Yann E. MORIN Cc: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/gpsd/gpsd.mk | 8 -------- 1 file changed, 8 deletions(-) diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk index 0c7018f26d..b8526c0260 100644 --- a/package/gpsd/gpsd.mk +++ b/package/gpsd/gpsd.mk @@ -213,14 +213,6 @@ define GPSD_INSTALL_INIT_SYSV $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd endef -# systemd unit files are installed automatically, but need to update the -# /usr/local path references in the provided files to /usr. -define GPSD_INSTALL_INIT_SYSTEMD - $(SED) 's%/usr/local%/usr%' \ - $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service \ - $(TARGET_DIR)/usr/lib/systemd/system/gpsdctl at .service -endef - define GPSD_INSTALL_STAGING_CMDS (cd $(@D); \ $(GPSD_SCONS_ENV) \ From yann.morin.1998 at free.fr Fri Oct 21 18:58:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:58:22 +0200 Subject: [Buildroot] [git commit] package/gpsd: actually wait for after chrony Message-ID: <20221021185834.DE3DF86F53@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2c9ef36242341b5f8db171251d737d29fc376e0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We use gpsd's upstream systemd service unit files, which define a dependency on chronyd.service. And indeed, upstream chrony does provide an example service unit file chronyd.service. However, in Buildroot, we are not using chrony's upstream unit, we are providing our own, much simplified as compared to upstream. We install that unit file as chrony.service. Notice that subtle difference in the name: upstream's is chronyd, with a trailing 'd', while ours just chrony, without the trailing 'd'. As a consequence, in a Buildroot-built system, gpsd does not wait for after chrony is started, which causes all kind of mayhem when gpsd actually needs to talk to chrony. We have multiple options: 1. use chrony's upstream unit file; 2 rename the chrony service file as installed by Buildroot, to match what chrony would actually do; 3. tweak gpsd's unit file to refer to chrony.service, not chronyd.service; 4. leverage systemd's flexibility in how units are defined, and provide a drop-in to complement gpsd's unit to also wait for chrony.service. For 1. it is totally unknown why we do have our unit file to begin with, rather than use upstream's. Since upstream's is much more complex than ours, using it might have unforetold consequences. Going with 2. seems the easiest at first sight, but then it would break systems where users provide their own drop-ins for chrony, as they would no longer match. 3. is relatively easy, but running sed is not entirely nice. Besides, it semantically should be a post-install hook, rather than a systemd-init command, but again that makes things a bit more ugly. Also, some people may have their own gpsd.service in an overlay or whatever, which would break our fixup. Solution 4. is pretty straightforward, although it is not ideal either. To be noted: some distributions, like Ubuntu 20.04 at least, do install the chrony unit file as chrony.service, like Buildroot does. However, there does not appear to be any fixup in gpsd for this discrepancy, as their gpsd install still refers to chronyd.service. So that does not help us decide what to do. So, eventually, we decided to go with solution 4, which has the least impact on the system, and keeps the status-quo for all other use-cases. Signed-off-by: Yann E. MORIN Cc: Bernd Kuhls Cc: Alex Suykov Signed-off-by: Yann E. MORIN --- package/gpsd/br-chrony.conf | 2 ++ package/gpsd/gpsd.mk | 8 ++++++++ 2 files changed, 10 insertions(+) diff --git a/package/gpsd/br-chrony.conf b/package/gpsd/br-chrony.conf new file mode 100644 index 0000000000..67a79e5f65 --- /dev/null +++ b/package/gpsd/br-chrony.conf @@ -0,0 +1,2 @@ +[Unit] +After=chrony.service diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk index b8526c0260..961ebde649 100644 --- a/package/gpsd/gpsd.mk +++ b/package/gpsd/gpsd.mk @@ -213,6 +213,14 @@ define GPSD_INSTALL_INIT_SYSV $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd endef +# When using chrony, wait for after Buildroot's chrony.service +ifeq ($(BR2_PACKAGE_CHRONY),y) +define GPSD_INSTALL_INIT_SYSTEMD + $(INSTALL) -D -m 0644 $(GPSD_PKGDIR)/br-chrony.conf \ + $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service.d/br-chrony.conf +endef +endif + define GPSD_INSTALL_STAGING_CMDS (cd $(@D); \ $(GPSD_SCONS_ENV) \ From yann.morin.1998 at free.fr Fri Oct 21 18:59:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:59:17 +0200 Subject: [Buildroot] [PATCH 1/2] package/gpsd: drop legacy cleanup In-Reply-To: <27279_1663677903_6329B5CF_27279_384_1_a0ff8f4ff44501c533f2779965524fc93294a825.1663677504.git.yann.morin@orange.com> References: <27279_1663677903_6329B5CF_27279_384_1_a0ff8f4ff44501c533f2779965524fc93294a825.1663677504.git.yann.morin@orange.com> Message-ID: <20221021185917.GB2992523@scaer> Yann, All, On 2022-09-20 14:45 +0200, yann.morin at orange.com spake thusly: > From: "Yann E. MORIN" > > Since gpsd-3.22, the systemd service files no longer contain hard-coded > paths to /usr/local/, but use @SBINDIR@ which is replaced appropriately > at build time, and contains the correct path. > > Drop the legacy fixup now. > > Signed-off-by: Yann E. MORIN > Cc: Bernd Kuhls Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/gpsd/gpsd.mk | 8 -------- > 1 file changed, 8 deletions(-) > > diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk > index 0c7018f26d..b8526c0260 100644 > --- a/package/gpsd/gpsd.mk > +++ b/package/gpsd/gpsd.mk > @@ -213,14 +213,6 @@ define GPSD_INSTALL_INIT_SYSV > $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd > endef > > -# systemd unit files are installed automatically, but need to update the > -# /usr/local path references in the provided files to /usr. > -define GPSD_INSTALL_INIT_SYSTEMD > - $(SED) 's%/usr/local%/usr%' \ > - $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service \ > - $(TARGET_DIR)/usr/lib/systemd/system/gpsdctl at .service > -endef > - > define GPSD_INSTALL_STAGING_CMDS > (cd $(@D); \ > $(GPSD_SCONS_ENV) \ > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 21 19:01:09 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 13:01:09 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiojobs: bump to version 1.1.0 Message-ID: <20221021190109.3411635-1-james.hilliard1@gmail.com> Add new python-async-timeout runtime dependency. License hash changed due to removal of full license text: https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 Signed-off-by: James Hilliard --- package/python-aiojobs/Config.in | 1 + package/python-aiojobs/python-aiojobs.hash | 6 +++--- package/python-aiojobs/python-aiojobs.mk | 6 +++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/package/python-aiojobs/Config.in b/package/python-aiojobs/Config.in index 0cdd1c106f..2dc4f3f955 100644 --- a/package/python-aiojobs/Config.in +++ b/package/python-aiojobs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_PYTHON_AIOJOBS bool "python-aiojobs" + select BR2_PACKAGE_PYTHON_ASYNC_TIMEOUT # runtime help Jobs scheduler for managing background task (asyncio). diff --git a/package/python-aiojobs/python-aiojobs.hash b/package/python-aiojobs/python-aiojobs.hash index 44bf20c428..511953713b 100644 --- a/package/python-aiojobs/python-aiojobs.hash +++ b/package/python-aiojobs/python-aiojobs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiojobs/json -md5 d537fefca047067255758d7cb9e39db8 aiojobs-0.3.0.tar.gz -sha256 f6631d42dc4308f7d883abbd70d4e976f3fcc35a3ba1e8eae5d4af4940a1e0c3 aiojobs-0.3.0.tar.gz +md5 18a5b38cc13b2d59a91fdfec64588b4c aiojobs-1.1.0.tar.gz +sha256 f0c43dfc4de359052a67df309b593732c32028deef1bb787c7a363da29accde3 aiojobs-1.1.0.tar.gz # Locally computed sha256 checksums -sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE +sha256 1803dc89455114eefad3b827543343edc2452432fdac29b5edc66c8b66d4cbf3 LICENSE diff --git a/package/python-aiojobs/python-aiojobs.mk b/package/python-aiojobs/python-aiojobs.mk index 5d9a19eb8c..075d807d8b 100644 --- a/package/python-aiojobs/python-aiojobs.mk +++ b/package/python-aiojobs/python-aiojobs.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_AIOJOBS_VERSION = 0.3.0 +PYTHON_AIOJOBS_VERSION = 1.1.0 PYTHON_AIOJOBS_SOURCE = aiojobs-$(PYTHON_AIOJOBS_VERSION).tar.gz -PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/da/09/76d9c0d66d2fd1333835f110cd85f7456de7cf3f60425e3b283fba562731 -PYTHON_AIOJOBS_SETUP_TYPE = distutils +PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/99/75/b6d3678d804fffda81ebbac6214c35a4417d5ddbd70ffe7958ad951e64d2 +PYTHON_AIOJOBS_SETUP_TYPE = setuptools PYTHON_AIOJOBS_LICENSE = Apache-2.0 PYTHON_AIOJOBS_LICENSE_FILES = LICENSE -- 2.34.1 From yann.morin.1998 at free.fr Fri Oct 21 19:07:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:07:31 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel In-Reply-To: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <20221021190731.GC2992523@scaer> Yann, All, On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > To generate the glibc locale data, we call into a recursive Makefile, > so as to generate locales in parallel. This is done as part of a > target-fialize hook. *finalize > However, that hook is registered after all packages have been parsed, > and as such, it maye be registered after hooks defined in packages. > > Furthermore, the expansion of target-finalize hooks is done in a recipe, > so it is not easy to understand whether this generates a "simple" rule > or not. > > As a consequence, despite the use of $(MAKE), make may not notice that > the command is a recursive call, and will decide to close the jobserver > file-descriptors, yieldiong warnings like: *yielding > make[2]: warning: jobserver unavailable: using -j1. Add '+' to > parent make rule. > > This causes the lcoale data to not be generated in parallel, which is *locale (damn, I forgot to fix that one when applying) > initially all the fuss about using a sub-makefile... > > So, do as suggested, and prepend the hook with a '+', so that it > isexplicit to make that it should not close its jobserver fds. *is explicit > Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) > > Signed-off-by: Yann E. MORIN > Cc: Gleb Mazovetskiy Applied to master with the typoes fixed, thanks. Regards, Yann E. MORIN. > --- > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..ededfa491d 100644 > --- a/Makefile > +++ b/Makefile > @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) > PACKAGES += host-localedef > > define GENERATE_GLIBC_LOCALES > - $(MAKE) -f support/misc/gen-glibc-locales.mk \ > + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ > ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ > LOCALES="$(GLIBC_GENERATE_LOCALES)" \ > Q=$(Q) > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:08:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:08:41 +0200 Subject: [Buildroot] [PATCH 2/3] support/scripts: don't require gawk to generate glibc gconv modules In-Reply-To: <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> Message-ID: <20221021190841.GD2992523@scaer> Yann, All, On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > When a subset of the glibc gconv modules installed, we eed to generate a *are installed, we need > trimmed-down list of available modules. We currently use gawk for that. > > However, we are not using any GNU extension in that awk script, and it > happens to work as expected when using mawk (which has no GNU > extension). > > Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) > did not explain why it used gawk explicitly, and given the age for that > commit, we doubt we'd be able to have the involved participants recall > anything from that period... > > Besides, gawk is not a requirement for Buildroot. > > Switch over to using plain awk. > > Signed-off-by: Yann E. MORIN Applied to master with the typoes fixed, thanks. Regards, Yann E. MORIN. > --- > support/scripts/expunge-gconv-modules | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules > index 03012c1ce3..bc60fc0ce4 100755 > --- a/support/scripts/expunge-gconv-modules > +++ b/support/scripts/expunge-gconv-modules > @@ -19,7 +19,7 @@ > # we handle each with slightly different code, since the second never has > # associated aliases. > > -gawk -v files="${1}" ' > +awk -v files="${2}" ' > $1 == "alias" { > aliases[$3] = aliases[$3] " " $2; > } > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:10:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:10:05 +0200 Subject: [Buildroot] [PATCH 3/3] toolchain: suppot gconv modules fro mglibc >= 2.34 In-Reply-To: <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> Message-ID: <20221021191005.GE2992523@scaer> Yann, All, In the title: *support, from glibc Also, many typoes in the commit log... On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > Startig with glibc 2.34, the gconv modules description has been split in > two: > - a common definition in the old location, /usr/lib/gconv/gconv-modules > - specific defitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ > > This is done so as to simplify the handling of glibc gconv modules, and > eventually to segregate those outside of glibc, and so that third-parties > may also provide their own gconv converters and their definitions. > > And starting with that same glibc version, most of the gconv modules > definition is moved to an extra configuration file in that > sub-directory. > > It is thus no longer possible to use special code pages, like cp850, > which are very usefull to access FAT-formatted devices. > > Add suppot for this new gconv layout, while keeping support for older > glibc versions. Note that the modules themselves are not moved or > renaed, just the definition files have changed. > > Instead of passing the one old gonv modules definitions file on stdin, > we pass the base directory to that file, and move into the script the > responsibility to find all the gconv definition files. > > Signed-off-by: Yann E. MORIN > Cc: Thomas Petazzoni > Cc: Romain Naour > Cc: Thomas De Schampheleire > Cc: Giulio Benetti Applied to master with the many typoes fixed, thanks. Regards, Yann E. MORIN. > --- > support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ > toolchain/toolchain.mk | 9 +++++++-- > 2 files changed, 23 insertions(+), 8 deletions(-) > > diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules > index bc60fc0ce4..e9ac48ca3f 100755 > --- a/support/scripts/expunge-gconv-modules > +++ b/support/scripts/expunge-gconv-modules > @@ -1,11 +1,17 @@ > #!/usr/bin/env bash > > # This script is used to generate a gconv-modules file that takes into > -# account only the gconv modules installed by Buildroot. It receives > -# on its standard input the original complete gconv-modules file from > -# the toolchain, and as arguments the list of gconv modules that were > -# actually installed, and writes on its standard output the new > -# gconv-modules file. > +# account only the gconv modules installed by Buildroot, and generates > +# a stripped-down gconv-moduels file on its stdout. > +# It takes two arguments: > +# $1: the directory where to look for gconv modules definitions > +# $2: a space-separated list of gconv modules that were actually > +# installed > + > +# Starting with glibc-2.34, modules definitions are located in multiple > +# files: > +# ${1}/gconv-modules > +# ${1}/gconv-modules.d/*.conf > > # The format of gconv-modules is precisely documented in the > # file itself. It consists of two different directives: > @@ -19,7 +25,11 @@ > # we handle each with slightly different code, since the second never has > # associated aliases. > > -awk -v files="${2}" ' > +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do > + [ -e "${f}" ] || continue > + cat "${f}" > +done \ > +|awk -v files="${2}" ' > $1 == "alias" { > aliases[$3] = aliases[$3] " " $2; > } > diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk > index 08d1649603..fe87a72ed4 100644 > --- a/toolchain/toolchain.mk > +++ b/toolchain/toolchain.mk > @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS > $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ > $(TARGET_DIR)/usr/lib/gconv \ > || exit 1; \ > + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ > + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ > + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ > + fi; \ > else \ > for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ > $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ > @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS > || exit 1; \ > done; \ > done; \ > - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ > - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ > + ./support/scripts/expunge-gconv-modules \ > + $(STAGING_DIR)/usr/lib/$${d}/gconv \ > + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ > >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ > fi > endef > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:46:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:46:06 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel In-Reply-To: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <20221021194606.GF2992523@scaer> Yann, All, Your git send-email setup is incorrect: the From field is missing the realname part (which is weird, as it was not missing in the previous gpsd patches)... Regards, Yann E. MORIN. On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > To generate the glibc locale data, we call into a recursive Makefile, > so as to generate locales in parallel. This is done as part of a > target-fialize hook. > > However, that hook is registered after all packages have been parsed, > and as such, it maye be registered after hooks defined in packages. > > Furthermore, the expansion of target-finalize hooks is done in a recipe, > so it is not easy to understand whether this generates a "simple" rule > or not. > > As a consequence, despite the use of $(MAKE), make may not notice that > the command is a recursive call, and will decide to close the jobserver > file-descriptors, yieldiong warnings like: > make[2]: warning: jobserver unavailable: using -j1. Add '+' to > parent make rule. > > This causes the lcoale data to not be generated in parallel, which is > initially all the fuss about using a sub-makefile... > > So, do as suggested, and prepend the hook with a '+', so that it > isexplicit to make that it should not close its jobserver fds. > > Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) > > Signed-off-by: Yann E. MORIN > Cc: Gleb Mazovetskiy > --- > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..ededfa491d 100644 > --- a/Makefile > +++ b/Makefile > @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) > PACKAGES += host-localedef > > define GENERATE_GLIBC_LOCALES > - $(MAKE) -f support/misc/gen-glibc-locales.mk \ > + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ > ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ > LOCALES="$(GLIBC_GENERATE_LOCALES)" \ > Q=$(Q) > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:01:25 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:01:25 +0200 Subject: [Buildroot] [git commit] support/scripts: don't require gawk to generate glibc gconv modules Message-ID: <20221021195123.819B686F77@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=822cc1ebc42cc43877a20ca51d94689aed3e4424 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master When only a subset of the glibc gconv modules are installed, we need to generate a trimmed-down list of available modules. We currently use gawk for that. However, we are not using any GNU extension in that awk script, and it happens to work as expected when using mawk (which has no GNU extension). Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) did not explain why it used gawk explicitly, and given the age for that commit, we doubt we'd be able to have the involved participants recall anything from that period... Besides, gawk is not a requirement for Buildroot. Switch over to using plain awk. Signed-off-by: Yann E. MORIN Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index 03012c1ce3..bc60fc0ce4 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -19,7 +19,7 @@ # we handle each with slightly different code, since the second never has # associated aliases. -gawk -v files="${1}" ' +awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } From yann.morin.1998 at free.fr Fri Oct 21 18:59:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:59:54 +0200 Subject: [Buildroot] [git commit] Makefile: really generate glibc locales in parallel Message-ID: <20221021195123.77ACB86F75@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4164ed24f277b24096ab065aa85b7de9d0c80c02 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master To generate the glibc locale data, we call into a recursive Makefile, so as to generate locales in parallel. This is done as part of a target-finalize hook. However, that hook is registered after all packages have been parsed, and as such, it maye be registered after hooks defined in packages. Furthermore, the expansion of target-finalize hooks is done in a recipe, so it is not easy to understand whether this generates a "simple" rule or not. As a consequence, despite the use of $(MAKE), make may not notice that the command is a recursive call, and will decide to close the jobserver file-descriptors, yielding warnings like: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. This causes the lcoale data to not be generated in parallel, which is initially all the fuss about using a sub-makefile... So, do as suggested, and prepend the hook with a '+', so that it is explicit to make that it should not close its jobserver fds. Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) Signed-off-by: Yann E. MORIN Cc: Gleb Mazovetskiy Signed-off-by: Yann E. MORIN --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..ededfa491d 100644 --- a/Makefile +++ b/Makefile @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) PACKAGES += host-localedef define GENERATE_GLIBC_LOCALES - $(MAKE) -f support/misc/gen-glibc-locales.mk \ + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ LOCALES="$(GLIBC_GENERATE_LOCALES)" \ Q=$(Q) From yann.morin.1998 at free.fr Fri Oct 21 19:02:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:02:40 +0200 Subject: [Buildroot] [git commit] toolchain: support gconv modules from glibc >= 2.34 Message-ID: <20221021195123.8CB5D86F78@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d948e1b34e4e6e199111feb29803d14dbfc120b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Startig with glibc 2.34, the gconv modules description has been split in two: - a common definition in the old location, /usr/lib/gconv/gconv-modules - specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ This is done so as to simplify the handling of glibc gconv modules, and eventually to segregate those outside of glibc, and so that third-parties may also provide their own gconv converters and their definitions. And starting with that same glibc version, most of the gconv modules definitions are moved to an extra configuration file in that sub-directory. It is thus no longer possible to use special code pages, like cp850, which are very useful to access FAT-formatted devices. Add support for this new gconv layout, while keeping support for older glibc versions. Note that the modules themselves are not moved or renamed, just the definition files have changed. Instead of passing the one old gonv modules definitions file on stdin, we pass the base directory to that file, and move into the script the responsibility to find all the gconv definition files. Signed-off-by: Yann E. MORIN Cc: Thomas Petazzoni Cc: Romain Naour Cc: Thomas De Schampheleire Cc: Giulio Benetti Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ toolchain/toolchain.mk | 9 +++++++-- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index bc60fc0ce4..e9ac48ca3f 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -1,11 +1,17 @@ #!/usr/bin/env bash # This script is used to generate a gconv-modules file that takes into -# account only the gconv modules installed by Buildroot. It receives -# on its standard input the original complete gconv-modules file from -# the toolchain, and as arguments the list of gconv modules that were -# actually installed, and writes on its standard output the new -# gconv-modules file. +# account only the gconv modules installed by Buildroot, and generates +# a stripped-down gconv-moduels file on its stdout. +# It takes two arguments: +# $1: the directory where to look for gconv modules definitions +# $2: a space-separated list of gconv modules that were actually +# installed + +# Starting with glibc-2.34, modules definitions are located in multiple +# files: +# ${1}/gconv-modules +# ${1}/gconv-modules.d/*.conf # The format of gconv-modules is precisely documented in the # file itself. It consists of two different directives: @@ -19,7 +25,11 @@ # we handle each with slightly different code, since the second never has # associated aliases. -awk -v files="${2}" ' +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do + [ -e "${f}" ] || continue + cat "${f}" +done \ +|awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk index 08d1649603..fe87a72ed4 100644 --- a/toolchain/toolchain.mk +++ b/toolchain/toolchain.mk @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ $(TARGET_DIR)/usr/lib/gconv \ || exit 1; \ + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ + fi; \ else \ for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS || exit 1; \ done; \ done; \ - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ + ./support/scripts/expunge-gconv-modules \ + $(STAGING_DIR)/usr/lib/$${d}/gconv \ + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ fi endef From moritz at h6t.eu Fri Oct 21 21:04:07 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Fri, 21 Oct 2022 23:04:07 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Message-ID: <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Am 21.10.22 um 18:41 schrieb James Hilliard: > On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: >> >> Am 20.10.22 um 00:12 schrieb James Hilliard: >> >>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot >>> wrote: >>>> From: Moritz Bitsch >>>> >>>> The cargo --release flag is used to create optimized builds, not supplying >>>> --release has major performance implications. >>> Is there an env variable we can use to set this instead? >>> >>> Some packages use cargo without the cargo infrastructure, for example >>> we have a number of pyo3(https://pyo3.rs/) based packages that use the >>> cargo env but not the cargo build commands from here. >> I could not find any env variable for switching profiles. >> >> I had a look at python-rtoml, and the used setuptools-rust: supplying >> --debug to >> the "setup.py build" removes the --release flag from the cargo invocation. > > Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > we also have maturin which is pep517 based. I'm in no way a a python expert, so take my words with a grain of salt. I could not find a way to specify what build profile is used by maturin when in a pep517 build. Even if maturin supports the -r flag for release builds when called directly. > >>>> Signed-off-by: Moritz Bitsch >>>> --- >>>> package/pkg-cargo.mk | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >>>> index f7e3f39503..e0556252fa 100644 >>>> --- a/package/pkg-cargo.mk >>>> +++ b/package/pkg-cargo.mk >>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >>>> $$($(2)_CARGO_ENV) \ >>>> cargo build \ >>>> --offline \ >>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >>>> --manifest-path Cargo.toml \ >>>> --locked \ >>>> $$($(2)_CARGO_BUILD_OPTS) >>>> -- >>>> 2.37.3 >>>> >>>> _______________________________________________ >>>> buildroot mailing list >>>> buildroot at buildroot.org >>>> https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Fri Oct 21 22:08:00 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:08:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/empty: bump to version 0.6.22b Message-ID: <20221021220800.10420-1-fontaine.fabrice@gmail.com> - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) - Update hash of COPYRIGHT (update in year with https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) 10.08.2022 0.6.22b -------------------------------------------------------------------------------- * Man pages directory parameterization * Tarball clenup, repacking https://sourceforge.net/p/empty/code/ci/master/tree/CHANGELOG Signed-off-by: Fabrice Fontaine --- package/empty/empty.hash | 4 ++-- package/empty/empty.mk | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/empty/empty.hash b/package/empty/empty.hash index c5fbc2b4ac..cc74254a7a 100644 --- a/package/empty/empty.hash +++ b/package/empty/empty.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 2fccd0faa1b3deaec1add679cbde3f34250e45872ad5df463badd4bb4edeb797 empty-0.6.21b.tgz -sha256 f01dbe3c624084900b9df1393d9062518b2bc0487acd6a3300ebd6e71352d112 COPYRIGHT +sha256 f581d560e1fa857f5304586e3c2107b5838bcf11dedcccec4a7191fa9e261b69 empty-0.6.22b.tgz +sha256 db6b65f5eaf782a92715887ac107f3477d64016301a66194a92312b13ff89be1 COPYRIGHT diff --git a/package/empty/empty.mk b/package/empty/empty.mk index a9b8080a8e..91d9476445 100644 --- a/package/empty/empty.mk +++ b/package/empty/empty.mk @@ -4,12 +4,11 @@ # ################################################################################ -EMPTY_VERSION = 0.6.21b +EMPTY_VERSION = 0.6.22b EMPTY_SOURCE = empty-$(EMPTY_VERSION).tgz EMPTY_SITE = http://downloads.sourceforge.net/project/empty/empty/empty-$(EMPTY_VERSION) EMPTY_LICENSE = BSD-3-Clause EMPTY_LICENSE_FILES = COPYRIGHT -EMPTY_STRIP_COMPONENTS = 0 define EMPTY_BUILD_CMDS $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:11:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:11:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/easy-rsa: bump to version 3.1.1 Message-ID: <20221021221133.13293-1-fontaine.fabrice@gmail.com> https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 Signed-off-by: Fabrice Fontaine --- package/easy-rsa/easy-rsa.hash | 2 +- package/easy-rsa/easy-rsa.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/easy-rsa/easy-rsa.hash b/package/easy-rsa/easy-rsa.hash index e304c367fa..5be651bde0 100644 --- a/package/easy-rsa/easy-rsa.hash +++ b/package/easy-rsa/easy-rsa.hash @@ -1,5 +1,5 @@ # Locally computed: (after verifying gpg sig) -sha512 be2dedde19eaf923622da61db34ecb2e926b3f15a60a0c3d9858d3126dbe3b4af9c0f6674f964516572b50611ffd1d254952f27dc5de867bd7a67474c89be5f0 EasyRSA-3.1.0.tgz +sha512 8c8d1f4baf90475d4cce334d116b7f12b82687157796b25560600b5098769226ae2f60f02982c75266b625d66b465360ffa815260ad44850923e3fbc9ba8540a EasyRSA-3.1.1.tgz # Hash for license files sha256 7c4a4fc71745d93a87278801f1bca555562ca23f21e18293add64b9e6f6b7bf1 COPYING.md diff --git a/package/easy-rsa/easy-rsa.mk b/package/easy-rsa/easy-rsa.mk index 7c32c1d83d..4ea45506dd 100644 --- a/package/easy-rsa/easy-rsa.mk +++ b/package/easy-rsa/easy-rsa.mk @@ -4,7 +4,7 @@ # ################################################################################ -EASY_RSA_VERSION = 3.1.0 +EASY_RSA_VERSION = 3.1.1 EASY_RSA_SOURCE = EasyRSA-$(EASY_RSA_VERSION).tgz EASY_RSA_SITE = https://github.com/OpenVPN/easy-rsa/releases/download/v$(EASY_RSA_VERSION) EASY_RSA_LICENSE = GPL-2.0 -- 2.35.1 From paguilar at paguilar.org Fri Oct 21 22:09:56 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sat, 22 Oct 2022 00:09:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/libunistring: bump to version 1.1 Message-ID: <20221021220956.699772-1-paguilar@paguilar.org> https://savannah.gnu.org/projects/libunistring/ Signed-off-by: Pedro Aguilar --- package/libunistring/libunistring.hash | 2 +- package/libunistring/libunistring.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libunistring/libunistring.hash b/package/libunistring/libunistring.hash index 81ffd4fb0c..8267d56327 100644 --- a/package/libunistring/libunistring.hash +++ b/package/libunistring/libunistring.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature # https://ftp.gnu.org/gnu/libunistring/libunistring-0.9.10.tar.xz.sig -sha256 5bab55b49f75d77ed26b257997e919b693f29fd4a1bc22e0e6e024c246c72741 libunistring-1.0.tar.xz +sha256 827c1eb9cb6e7c738b171745dac0888aa58c5924df2e59239318383de0729b98 libunistring-1.1.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c COPYING.LIB diff --git a/package/libunistring/libunistring.mk b/package/libunistring/libunistring.mk index a69eacd676..8d5b6f54ec 100644 --- a/package/libunistring/libunistring.mk +++ b/package/libunistring/libunistring.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBUNISTRING_VERSION = 1.0 +LIBUNISTRING_VERSION = 1.1 LIBUNISTRING_SITE = $(BR2_GNU_MIRROR)/libunistring LIBUNISTRING_SOURCE = libunistring-$(LIBUNISTRING_VERSION).tar.xz LIBUNISTRING_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:24:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:24:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/irssi: bump to version 1.4.2 Message-ID: <20221021222412.109567-1-fontaine.fabrice@gmail.com> Use offical tarball link (from https://irssi.org/download) https://irssi.org/2022/07/17/irssi-1.4.2-released/ https://irssi.org/2022/06/12/irssi-1.4.1-released/ Signed-off-by: Fabrice Fontaine --- package/irssi/irssi.hash | 2 +- package/irssi/irssi.mk | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/irssi/irssi.hash b/package/irssi/irssi.hash index 05555250a7..ecd339d83d 100644 --- a/package/irssi/irssi.hash +++ b/package/irssi/irssi.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 a647bfefed14d2221fa77b6edac594934dc672c4a560417b1abcbbc6b88d769f irssi-1.2.3.tar.xz +sha256 79a4765d2dfe153c440a1775b074d5d0682b96814c7cf92325b5e15ce50e26a8 irssi-1.4.2.tar.xz # Locally calculated sha256 a1a27cb2ecee8d5378fbb3562f577104a445d6d66fee89286e16758305e63e2b COPYING diff --git a/package/irssi/irssi.mk b/package/irssi/irssi.mk index da71622a04..c2d02289ad 100644 --- a/package/irssi/irssi.mk +++ b/package/irssi/irssi.mk @@ -4,11 +4,9 @@ # ################################################################################ -IRSSI_VERSION = 1.2.3 +IRSSI_VERSION = 1.4.2 IRSSI_SOURCE = irssi-$(IRSSI_VERSION).tar.xz -# Do not use the github helper here. The generated tarball is *NOT* the -# same as the one uploaded by upstream for the release. -IRSSI_SITE = https://github.com/irssi/irssi/releases/download/$(IRSSI_VERSION) +IRSSI_SITE = https://codeberg.org/irssi/irssi/releases/download/$(IRSSI_VERSION) IRSSI_LICENSE = GPL-2.0+ IRSSI_LICENSE_FILES = COPYING IRSSI_CPE_ID_VENDOR = irssi -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:31:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:31:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 Message-ID: <20221021223144.116049-1-fontaine.fabrice@gmail.com> https://github.com/drowe67/codec2/releases/tag/v1.0.3 https://github.com/drowe67/codec2/releases/tag/v1.0.4 https://github.com/drowe67/codec2/releases/tag/v1.0.5 Signed-off-by: Fabrice Fontaine --- package/libcodec2/libcodec2.hash | 2 +- package/libcodec2/libcodec2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libcodec2/libcodec2.hash b/package/libcodec2/libcodec2.hash index 795ca37006..ba44aa015c 100644 --- a/package/libcodec2/libcodec2.hash +++ b/package/libcodec2/libcodec2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 14227963940d79e0ec5af810f37101b30e1c7e8555abd96c56b3c0473abac8ef libcodec2-1.0.1.tar.gz +sha256 cd9a065dd1c3477f6172a0156294f767688847e4d170103d1f08b3a075f82826 libcodec2-1.0.5.tar.gz sha256 9ebb6f82b7380a62ac74c5f0322c88e6744dedf2ebe1f54d6f088282b39844bf COPYING diff --git a/package/libcodec2/libcodec2.mk b/package/libcodec2/libcodec2.mk index b4f08a496e..b97db8ff59 100644 --- a/package/libcodec2/libcodec2.mk +++ b/package/libcodec2/libcodec2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCODEC2_VERSION = 1.0.1 +LIBCODEC2_VERSION = 1.0.5 LIBCODEC2_SITE = $(call github,drowe67,codec2,v$(LIBCODEC2_VERSION)) LIBCODEC2_LICENSE = LGPL-2.1 LIBCODEC2_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:36:30 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:36:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdmtx: bump to version 0.7.7 Message-ID: <20221021223630.122214-1-fontaine.fabrice@gmail.com> https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 Signed-off-by: Fabrice Fontaine --- package/libdmtx/libdmtx.hash | 2 +- package/libdmtx/libdmtx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libdmtx/libdmtx.hash b/package/libdmtx/libdmtx.hash index 98eef9aeeb..8b176d737a 100644 --- a/package/libdmtx/libdmtx.hash +++ b/package/libdmtx/libdmtx.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 be0c5275695a732a5f434ded1fcc232aa63b1a6015c00044fe87f3a689b75f2e libdmtx-0.7.5.tar.gz +sha256 7aa62adcefdd6e24bdabeb82b3ce41a8d35f4a0c95ab0c4438206aecafd6e1a1 libdmtx-0.7.7.tar.gz sha256 fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79 LICENSE diff --git a/package/libdmtx/libdmtx.mk b/package/libdmtx/libdmtx.mk index 04e089f1f7..00d37fb94e 100644 --- a/package/libdmtx/libdmtx.mk +++ b/package/libdmtx/libdmtx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDMTX_VERSION = 0.7.5 +LIBDMTX_VERSION = 0.7.7 LIBDMTX_SITE = $(call github,dmtx,libdmtx,v$(LIBDMTX_VERSION)) LIBDMTX_LICENSE = BSD-2-Clause or Special Permission LIBDMTX_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:43:57 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:43:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: bump to version 0.17 Message-ID: <20221021224357.129675-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://lists.x.org/archives/xorg-announce/2022-October/003226.html Signed-off-by: Fabrice Fontaine --- ...001-pciaccess.pc.in-add-Libs.Private.patch | 28 ------------------- package/libpciaccess/libpciaccess.hash | 7 ++--- package/libpciaccess/libpciaccess.mk | 4 +-- 3 files changed, 4 insertions(+), 35 deletions(-) delete mode 100644 package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch diff --git a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch b/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch deleted file mode 100644 index e520dd03d8..0000000000 --- a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch +++ /dev/null @@ -1,28 +0,0 @@ -From e1f9fc0a11559c1200005c4bfe34cd217ec117b4 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Oct 2019 19:03:32 +0200 -Subject: [PATCH] pciaccess.pc.in: add Libs.Private - -Add Libs.Private in pciaccess.pc.in so applications that wants to link -statically with pciaccess will know that they have to link with its -dependencies such as -lz - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/xorg/lib/libpciaccess/merge_requests/10] ---- - pciaccess.pc.in | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/pciaccess.pc.in b/pciaccess.pc.in -index 706c5f7..c2da3d9 100644 ---- a/pciaccess.pc.in -+++ b/pciaccess.pc.in -@@ -8,3 +8,4 @@ Description: Library providing generic access to the PCI bus and devices. - Version: @PACKAGE_VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lpciaccess -+Libs.Private: @PCIACCESS_LIBS@ --- -2.23.0 - diff --git a/package/libpciaccess/libpciaccess.hash b/package/libpciaccess/libpciaccess.hash index 2082be7d04..27ec59a452 100644 --- a/package/libpciaccess/libpciaccess.hash +++ b/package/libpciaccess/libpciaccess.hash @@ -1,7 +1,4 @@ -# From https://lists.x.org/archives/xorg-announce/2019-July/003014.html -md5 b34e2cbdd6aa8f9cc3fa613fd401a6d6 libpciaccess-0.16.tar.bz2 -sha1 ffaa13f2df5f822da1089b55223b217c142ef919 libpciaccess-0.16.tar.bz2 -sha256 214c9d0d884fdd7375ec8da8dcb91a8d3169f263294c9a90c575bf1938b9f489 libpciaccess-0.16.tar.bz2 -sha512 2f250048a270dfc0823d4bdd613aa272c58a80eaafd922850f56c4b6f7a45a263ed4cf521b52b49f04484ea44ebefb7407d079aa058318a5751ffb181e38fed1 libpciaccess-0.16.tar.bz2 +# From https://lists.x.org/archives/xorg-announce/2022-October/003226.html +sha512 8484605c66ef18c8d8a3e029a6d33e26fcaa450c1263790d89ac8b0a160ffb2dfceaa6140ac9ad7d8087283ecbec8ac801f757e44890d547c3cbecd2c922ca47 libpciaccess-0.17.tar.xz # Hash for license file: sha256 47012fd746980d1712ac4f3841ab6164bda1d2b84880760e45dbe1e1dc07f608 COPYING diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index d9a3a4e481..68d46b7f50 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBPCIACCESS_VERSION = 0.16 -LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.bz2 +LIBPCIACCESS_VERSION = 0.17 +LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.xz LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 21 22:44:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 16:44:48 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo: configure cargo profiles Message-ID: <20221021224448.3502942-1-james.hilliard1@gmail.com> The cargo profile flags currently only select a cargo build flag which does not accurately reflect the configured build settings, setting the cargo build flag also only works for packages using the cargo infrastructure directly and not with other packages using the cargo environment such as pyo3 based python packages(which indirectly invoke cargo build via the setuptools-rust and maturn python build backends). To ensure that cargo uses the correct profile settings for the build we need to set env variables for the two root profiles(dev/release) based on the buildroot build settings. For reference the default cargo root profile settings are: https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles As applications not using cargo infrastructure do not have a standard way of configuring a specific build profile due to the selected profile being determined by the cargo command line flags, the only reliable way to configure profile settings is to set both root profiles in the environment as this will ensure that they are used regardless of which cargo build flag(such as --debug or --release) is used. Cc: Moritz Bitsch Signed-off-by: James Hilliard --- package/pkg-cargo.mk | 100 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..4945770079 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -46,6 +46,106 @@ PKG_CARGO_ENV = \ CARGO_BUILD_TARGET="$(RUSTC_TARGET_NAME)" \ CARGO_TARGET_$(call UPPERCASE,$(RUSTC_TARGET_NAME))_LINKER=$(notdir $(TARGET_CROSS))gcc +# We always set both CARGO_PROFILE_DEV and CARGO_PROFILE_RELEASE +# as we are unable to select a build profile using the environment. +# +# Other cargo profiles generally derive from these two profiles. + +# Disable incremental compilation to match release default. +# +# Set codegen-units to release default. +# +# Set split-debuginfo to default off for ELF platforms. +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_INCREMENTAL="false" \ + CARGO_PROFILE_RELEASE_INCREMENTAL="false" \ + CARGO_PROFILE_DEV_CODEGEN_UNITS="16" \ + CARGO_PROFILE_RELEASE_CODEGEN_UNITS="16" \ + CARGO_PROFILE_DEV_SPLIT_DEBUGINFO="off" \ + CARGO_PROFILE_RELEASE_SPLIT_DEBUGINFO="off" + +# Set the optimization level with the release default as fallback. +ifeq ($(BR2_OPTIMIZE_0),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" +else ifeq ($(BR2_OPTIMIZE_1),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="1" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="1" +else ifeq ($(BR2_OPTIMIZE_2),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="2" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="2" +else ifeq ($(BR2_OPTIMIZE_3),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +else ifeq ($(BR2_OPTIMIZE_G),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" +else ifeq ($(BR2_OPTIMIZE_S),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="s" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="s" +else ifeq ($(BR2_OPTIMIZE_FAST),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +endif + +ifeq ($(BR2_ENABLE_LTO),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_LTO="true" \ + CARGO_PROFILE_RELEASE_LTO="true" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_LTO="false" \ + CARGO_PROFILE_RELEASE_LTO="false" +endif + + +ifeq ($(BR2_ENABLE_DEBUG),y) +ifeq ($(BR2_DEBUG_3),y) +# full debug info +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="2" \ + CARGO_PROFILE_RELEASE_DEBUG="2" +else +# line tables only +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="1" \ + CARGO_PROFILE_RELEASE_DEBUG="1" +endif +else +# no debug info +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="0" \ + CARGO_PROFILE_RELEASE_DEBUG="0" +endif + +# Enabling debug-assertions enables the runtime debug_assert! macro. +# +# Enabling overflow-checks enables runtime panic on integer overflow. +ifeq ($(BR2_ENABLE_RUNTIME_DEBUG),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="true" \ + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="true" \ + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="true" \ + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="true" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="false" \ + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="false" \ + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="false" \ + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="false" +endif + # # This is a workaround for https://github.com/rust-lang/compiler-builtins/issues/420 # and should be removed when fixed upstream -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 21 22:57:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 18:57:28 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: > > Am 21.10.22 um 18:41 schrieb James Hilliard: > > On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > >> > >> Am 20.10.22 um 00:12 schrieb James Hilliard: > >> > >>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > >>> wrote: > >>>> From: Moritz Bitsch > >>>> > >>>> The cargo --release flag is used to create optimized builds, not supplying > >>>> --release has major performance implications. Looking at this further the cargo --release flag merely tells cargo to use the release profile rather than the dev profile, however the issue of optimizations being enabled or not is really a matter of what the profile configuration is, right now we are effectively choosing between the default release or default dev profile configuration which does not properly match the build settings. Instead what we really want to do is configure all cargo profiles based on the selected buildroot build settings. Unfortunately cargo doesn't have any env variable that selects a profile, but we can sidestep this simply by configuring both root profiles(which other profiles inherit from). I think the existing cargo build flags are fine, I sent a patch which should fix the profile configurations so that they match the buildroot build settings, let me know if this fixes the optimization issue for you: https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ > >>> Is there an env variable we can use to set this instead? > >>> > >>> Some packages use cargo without the cargo infrastructure, for example > >>> we have a number of pyo3(https://pyo3.rs/) based packages that use the > >>> cargo env but not the cargo build commands from here. > >> I could not find any env variable for switching profiles. > >> > >> I had a look at python-rtoml, and the used setuptools-rust: supplying > >> --debug to > >> the "setup.py build" removes the --release flag from the cargo invocation. > > > > Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > > we also have maturin which is pep517 based. > > I'm in no way a a python expert, so take my words with a grain of salt. > > I could not find a way to specify what build profile is used by maturin > when in a pep517 build. Even if maturin supports the -r flag for release > builds when called directly. I think the real issue is actually not that the wrong build profile is being used so much as the build profile configuration itself is wrong. > > > > >>>> Signed-off-by: Moritz Bitsch > >>>> --- > >>>> package/pkg-cargo.mk | 2 +- > >>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>> > >>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >>>> index f7e3f39503..e0556252fa 100644 > >>>> --- a/package/pkg-cargo.mk > >>>> +++ b/package/pkg-cargo.mk > >>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >>>> $$($(2)_CARGO_ENV) \ > >>>> cargo build \ > >>>> --offline \ > >>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >>>> --manifest-path Cargo.toml \ > >>>> --locked \ > >>>> $$($(2)_CARGO_BUILD_OPTS) > >>>> -- > >>>> 2.37.3 > >>>> > >>>> _______________________________________________ > >>>> buildroot mailing list > >>>> buildroot at buildroot.org > >>>> https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Sat Oct 22 05:34:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 22 Oct 2022 05:34:47 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-21 Message-ID: <20221022053453.AB4EB40194@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-21 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 1 | 0 | 4 | 2022.08.x | 13 | 13 | 0 | 26 | master | 112 | 231 | 10 | 353 | Classification of failures by reason for master ----------------------------------------------- sysvinit-2.99 | 19 crun-1.5 | 15 host-sentry-cli-1.59.0 | 15 libnss-3.84 | 13 glibc-2.36-44-g2628500f5dff... | 12 host-f2fs-tools-1.15.0 | 12 brltty | 9 host-pahole-73383b3a39afe86... | 7 host-rust-1.64.0 | 6 libarchive-3.6.1 | 6 systemd-250.4 | 6 xz-5.2.7 | 6 btrfs-progs-5.16.2 | 5 efivar-38 | 5 linux-6.0.1 | 5 gerbera-1.10.0 | 4 linuxptp-3.1.1 | 4 perl-5.34.1 | 4 unknown | 4 batman-adv-2021.4 | 3 dahdi-linux-5c840cf43838e06... | 3 elfutils-0.186 | 3 gensio-2.5.5 | 3 host-binutils-2.38 | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 igd2-for-linux-2.1 | 3 libglib2-2.72.3 | 3 libgpg-error-1.45 | 3 dash-0.5.11.5 | 2 gobject-introspection-1.72.0 | 2 libcap-ng-0.8.3 | 2 ocf-linux-20171122 | 2 quickjs-2021-03-27 | 2 uclibc-1.0.42 | 2 acpid-2.0.33 | 1 alsa-lib-1.2.7.2 | 1 autofs-5.1.8 | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 exempi-2.6.1 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.39 | 1 jemalloc-5.3.0 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 liblog4c-localtime-1.0 | 1 libqb-2.0.6 | 1 libvorbis-1.3.7 | 1 linux-tools | 1 liquid-dsp-1.4.0 | 1 lpc32xxcdl-2.11 | 1 luaossl-20220711-0 | 1 mariadb-10.3.36 | 1 mtd-2.1.3 | 1 openal-1.22.0 | 1 openssh-9.1p1 | 1 openvmtools-11.3.5-18557794 | 1 opus-1.3.1 | 1 procps-ng-3.3.17 | 1 proxychains-ng-4.16 | 1 putty-0.76 | 1 pv-1.6.20 | 1 rauc-1.8 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 usbguard-1.1.1 | 1 wolfssl-5.5.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/a4428059ca2001ef0ec8b233a03853a30588b70d | ORPH mips64el | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/e7b8a80a9c03644e6099fa8d6eee0df959e50f0f | or1k | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a199fe0aa457668e91e1d4dcfaa73be00ce316e5 | powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b3528c5886bcf8e6db5e279764542c03a874586d | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/f61646ed8d4ddc520723287dd98af21e8d0c6a26 | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b28048cd57746d75f9a664ded8b9267a7d17f2bd | sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/89e6f012971698e0f365ce2886488dd3268c0790 | mipsel | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/b27f53884fc41fd802eb61b4a0d5e58dd5db5727 | ORPH arc | brltty | TIM | http://autobuild.buildroot.net/results/dd08c305437a04cac3a349ceeaa394282fd01164 | mips | brltty | TIM | http://autobuild.buildroot.net/results/4790214bbe0f932c02beaa8884af0fb68338aacf | riscv32 | brltty | TIM | http://autobuild.buildroot.net/results/1c7fbec2bb4d444f4fe5b98b328873aae84c9399 | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/98cc654fe7a9bad2e0afc1d92a2bf83b581e5227 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/5fba1da10b888becd251bf7da383ce11f6d328cb | s390x | brltty | TIM | http://autobuild.buildroot.net/results/489f0b1e6d531a0c3d5f05ef30d071bed9067e86 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/87f2eed7462b8ca57cc191fce0c08177ea498167 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/db0eaa716729d8f51cb0efff3f4865d2c68a0d79 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/dca4b18cfe5fedf768b719c5c1e83ca7a4bc60ec | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a2936ba90866bf5a781a620f8aa8617bb7bc5b2a | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b72e31d86c882dc8f7363fbc27efa4ea5fe564e1 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e55e59d715775317b78ee601a55f6382af7b1d07 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9a8157a9fc68443267260eb11be401de9cd4b6c3 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6429c983c9c571db4504dc8f1faddc8d97eb101e | ORPH nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/faaa5eb138afa382ef16e9366d4690809975fe87 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/762bcbbea2d101097f8534bbd608b63732b45968 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/22d214c665292baf9026433e97f8245b02ded0c0 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/112c01ada3023b2529c788e6a3f2e3bcd3316f60 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/71e79a12be2a38dc9ebe580ebe5a46b23016c739 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f079d1d180e45e2f9c2f05de71f436ba17611668 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c8decbf5e3fc47ef66edc4a0ac1a61b20aedd0a6 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3ea798054ab31245498572aa98161fedaa0c062f | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9102ff9206815f3600a851e1486d2e15cb1f8ab0 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c640227aa7a32528b6bc8b947fdadf8d553c26ac | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/811f7fc7112e3b575120ff4406e74fccd2434a3c | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/242674282ae8c0473e4206af6c5c3d6562a2eab6 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0f262000d19963af671539d6bcb6dd6b25449cf | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0b2b27b82d2ed049accfbc4a28e89d8233b99475 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cd382dd1b57e2264d28cdacf3f00ed204b3622ca | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/463b7ac2da7fc2b43290e2f6060dd320559344d1 | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3372b25762b00eeb7230c70952e493456b3b2670 | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/dc7f0f56e01fb4ae5b993aada6e57c5a4d419d87 | powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5d70e90aff7d7affce049f0fb50f846ac4911d13 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/85dce21ba7d94d5d7ab3a077f4fcf98f6e3f64fe | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/96c158d39512fa9dffff3a5ce7522cb8a6433063 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d097a86fa24f812f4b18c379e5dbc94a6ccd057 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/44c46de36d46d832ab7eefef848163dd792d6b08 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/5f0b7346ed62746469a432ec24032d63520ab16a | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/f8fcb093ce6c68230c9467a2a20ae3d447f7010f | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/1a6f31415db678b76bc866f994d8e64b2e91c285 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f921b000edab30ed09965575cc0725ddaac266c6 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/378305066f1e2404e336ea542414869399b3bc42 | ORPH mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/264ba84fbe53388d5047c5fd318dd45469ff5731 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/415560ee93e56166f197ddbcee4bdecf45561f6b | aarch64_be | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/419f17150bd48fadce1627e30d06c8171351edaf | mips64el | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/23f564e3eac6e936309d146d5c23165a8d5de236 | mipsel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/69b5d9aa8b366dae9789d338afdf1d8c7bb214b0 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/b8043621f941269efc839ed5c48b80bbda1fd3de | arm | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/ef81f63df0e414eaf3d8a4398a0b28e321c94554 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/98c91570d5a9cf8e6b8e3cb1c1a2d558fa87bced | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/7e5bd50835fdd07a3edf33adbd04a17e94325893 | s390x | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5e101bb2deef369038066acec3001b75d2930f25 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/da304f4353aee0b736b4e567243050452a2a32aa | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fe57ac66f15cfbf784a637c444546b62aaadadb5 | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/55d044fb750e8c125b0aed7f349ea9c6357fd1b5 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/acdfa6e8f083d44d4345c660991c17923c42f9a8 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cb9e4ed65ee0f0e85e432906ec0b0d4014578cb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9d249534b17cb292bdda3ba9c0fc7e1cefeea2d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bc7c8a685c62d5ad590aa5bbf2983c69a935347 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af1fb36f7d972b6fd26b628f00d4f2a50db4f609 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46d7934778c71842900256d969c0dd909179b886 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a75837b10e81d998d774db1299d45ddd814ab14 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d2c446f623c5e21889ed3202842f145959aee25 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00d692b9b850ef22ca852e417bedab78adfe2e2c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71773b014233101be286f161ff8cf790b77f32e7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69047305cd9fc8b6ad9194dfa425883bf637c0b5 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13cbbb1200092a4b9f0521b968eb2ba0467322a9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/265073aa19e5b620ec8deb89af43350af223505d | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/4894b162f97e369d2f179975562894cba28a8a55 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/689dfa172beaf4d4d22830ad95ef2b0b884080af | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/93700865cea12b293e382a934e74529b6b624591 | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8001ae95b618c4a80fca4aa28590e545d62dbe08 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/78c8880e032d2ae525f16afee4beef9cb6f3e5a3 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/531b945ad24ecd8aac2f59cf8f5a24d52dba323c | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/168f4cb76be3a1564dc9e84cabe152a8132326c4 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea0513d72aab0ec9b16448c5389c864fcb3251e5 | m68k | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f2c07067d573870f85ff05e7ab8e53ac76c4105f | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89bbdf6098803fb927036bb8f253b658dccf6e41 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3292e29f47adc2a642f981bfd9b29de0440c770f | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dfad7f18b06ce2d3a400746f9c590762b0acf209 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/37724bce05dabb55694984357858fa95e144610d | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cd66f9c99ce3f3c27727d02589ded96c4faf3b8d | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b739e5cf6d97e99b571e4678730ee31606db51bb | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/27c7345a3bac3ba2a4acad46d919f0843a74c083 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/96c71d86657e99e297442016653e6c36fb65dd53 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0bb06d325d4d976e7b9ded4e85a3165b70ad051c | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5802784f6616c3be4835f2cb4080dbbc8d678037 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/99f6cddfadcee94e117775dbedcf476c997a1678 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d84e831eef749f79eecfb5e4b84ba5424e69402b | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b82aa041534288528a20b4955cabe118eea2e0f1 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/07dce54f02a7569aa8dc7b00b590cf80c183f2d4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a34289d87231f652ecf235d79991c2592e07ab48 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b770124ec8d0dbf47dc03415c67bce694310ffe3 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e8734352b93bff900af9ea1d32d2c60d5382a225 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7e9a976e0714c3282804fadd9d1b11da4981cbed | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/670c687ea8620f957b32a37a03dc1b80f0debaa7 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5f6ad76cd8a506b67a578b28051ea51c40c9d17f | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/63b707c985095134f5501404134714363fb2082e | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/21eca8bc9bb03523a4b73c66c38c4aaf4b6036af | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b67c62b0c1201691c4bdd5eac762c2e875790003 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b26915ccd827e217ea8ccd8373bc39d02b5f7b40 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/df3ce57b09f7cbea87115a32e854e8579f0201f7 | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4f2c090e7377ee6574dc8ff31c434509059a6345 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29e0bd7b85cc504617fba80733b5b749346a2a93 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4e3b8eb552c70f4db377111414d343c551d04806 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6f4182da6074a42cfbe6b61a8e2a08b823ccd04a | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bdc75181a445e89dad114ae3f6f1fe11a58d5d4b | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f6dc8a12388eeb8f0242433255ee6cdad03b1ee | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/beb74e934a679901d46214857bd858c656c69370 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ba7294ecdd7a29adc6a7be551816a97ec796a01e | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/86f3e2db7bd740fc9696a08c325af76af8b7edac | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/754c296230e41d44cecb3e80fbc6757350c12240 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4065c94664504e8576c928fc895e0c290a8b3125 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4472b25933650b6f518008cf01c2a29e0e5f7c11 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/74affbd4cc393de33490149f8dec58b936921d36 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b861d55bc5f06dd322d08b6d56bea329f9f3842f | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53ade4317a0dd8a61ef51aad6fea93bbc3f836c1 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d6517e84309d54349d1fbb8f7a73f1c929b3c4c9 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/020fe2fca315aea01a7d7928173dd1d2b6c42198 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/be5e28681407273781ac8a77588c49334f2f7f6b | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b7be5f601e338d4130dc4bd6c248a7bfda24ee72 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/81a5021a4468f87742cf676ae19f731773e6f4b1 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/97567fd063d1492504ecc9976b6078dd890b6ff3 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/92288db9f0c81e116e3f452a8afa0a5b55f4942b | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e6112f514808a72285dca09bfb3268cab0a06e8c | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ad8e7be15146127c86f79d14fde6fe2cceff2d36 | sh4a | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/b5fe739cb5f347aa8ea4b5b094075d92a8dd9b53 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b9db26e7905ba1a59ea175851a6f4a692eecb7ec | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aeac3dc8106a4cdfe3e417fa66e902b60cb3d519 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1def3966dc8161399f6e85a81b14aa182f83d3f1 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b4cff1684a16297d7d9e58baf415baeb02f054e4 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/feffa4ed1087d39cbf738ef6d35f794d2e168504 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bc279853f60b97fbbda9c1b3dc8e974a07659aab | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/9733477141a9a43bdd2bbb429ec6c172e813fbf2 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/87f5c52675bb10fd0abad41ff1b11a601296d920 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6f635af6bcbe2a00967dd8dc92811b37658b8cc3 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/1b533bd5883d861bf52fc148d1ff4ad5cb169789 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/691f146e2e69c73244a25a99647fbfc1830401e9 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2e9a7228f845f5fd1d701a7f0076a7c1c0957295 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8b45d1917c155c553c1fee96de41bc4b8c1e9808 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2d0b03132fc429e965dcbc9f3eaf441c63e7f039 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/80f0e44c9eefa197d5a004d9551f59851f78dde1 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/94dbfcf7165a8c9290637717ff89df5de53cabbe | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/576a3fdb2092d620dec0f53414bbc0347d3b1ef6 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0e1be660fc206b2501ebc18424db3c3f1c936612 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1efed21659fe2b4331dfa2d0cb834853e0de8668 | sh4eb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/73f8c653c319b65e5e81484d52fa66cd9126ddd9 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ce8d3291c51f59a6bc3ba9fa08239fcbe432b993 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8af849b00cde45a1a12e9456cf542c39ef6d3c66 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/fbe66901b4ed1fda6b5080e66a80476e35668609 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d22d36a1633404f449a0cfc4d2a199be9a46c8d0 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/acefcd37eef5b10715bffc05833be12a8eba8924 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b91934f3decf5890d9ebe9d49ec04c14c2f8e86c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/25cf95b3fd94ce27d5a9c04fb68b56cec90dc221 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b39c957b6aadbf5349808fc651aa4d1bce28d8a7 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d51e0007327ce0dabe731511e580792bb0f52b46 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ea97128ffda6369235251827eed009b24b012d8 | mips64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/55b4acda3555c1e0134a3a8967849da1d9e50032 | powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/54ad7a600488c6dfa06371a489837feda90661a1 | s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/85b57b7896acbfc261533d510e277918bb7935aa | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/aae94d4680c08140f509c86eea837ee43e781830 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e0c5b7aca1feda5759c4e69a0989c06289a4fd6b | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/903ade5ff0053ecf0487b5b19f14413e1762e9e0 | ORPH microblaze | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1374cb97ee73997695cd583396b2b13713d29d05 | ORPH m68k | linux-tools | NOK | http://autobuild.buildroot.net/results/cdedaa1eb7c2e744fb3b127cf03e8e580146ac6c | ORPH mips64el | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/8c7ea4eba7e26a2f0b2b1b57ae0b4d8e557a1f4e | xtensa | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/c5600b603cecd4df8b3b7f043738f305688349e8 | sparc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3f570165eb0a70f8f32b8ee97bc39baede047ad4 | mips64el | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/ee39e8052fc5b693a645aa070244c3d4da91aad3 | sh4aeb | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/ac1a37d1c87739718cffad42f2bfb49adce4c028 | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/2ef74e295913d81393e8d586243255933cbcd7a5 | ORPH arc | luaossl-20220711-0 | NOK | http://autobuild.buildroot.net/results/343b57d4eec4b28841023dabed5f92ee9fccecfe | or1k | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/8cbe531f77d64b011d88620805622a90b37508d1 | ORPH arc | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/a903c4cda2f62fd53bfd836a1e47123f869c413e | x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4e32f701a36b9c33fe0119e2cdc529625ba9bae6 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/89ded53cad7dd6a52f5e58e0cac58e6fdd1ddf7a | ORPH mips64el | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/7030667369c5852bb935dc5922a49f743ab07c04 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/7e0174f98f280a36c0172c8aaf1e02e425f2ca6a | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/eb277fb780fc4d9ff3a0791910ecd3274d61cd5d | armeb | opus-1.3.1 | NOK | http://autobuild.buildroot.net/results/0a7d524511aaca6eba479938bfd948cfd5f62021 | ORPH powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7eb04a16d8c880e9e645843bb197795fbb617deb | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/25edfe1ccfc0ec4d6d98479db41808d296e54fe0 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3fa631d5c8722772dcb00fe62dc50e6b68ba45b9 | x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/73da13f2d05a58aa8ccdfb17d17b7da1038646c6 | armeb | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/0dc6601189c9e087f821a82ee98709044e9ea0e3 | ORPH mips64 | proxychains-ng-4.16 | NOK | http://autobuild.buildroot.net/results/b696abb67595b4e4a3c40b2380691aebbc261550 | ORPH aarch64 | putty-0.76 | NOK | http://autobuild.buildroot.net/results/6f73a3b4841a958dd95b1651a6213ae5b9a033ca | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/7f8641566dd9b175e6a669e1f85340d1d81e97e5 | ORPH arm | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/191ca86f080406b5b236ae2b8316c48fbb671b9d | sh4 | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/94fe498f2403fd249087e7241dbf870076d62e1b | or1k | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/b6df9ba1d2a32fb5014f15cf5641b230a1c8867b | powerpc64le | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6d3d8f16688c340c4bf4690016b8cb9a2b7a857c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd2f476a13f62e48c0650ce02d309bfff40ddfb2 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae97cbc97be84e74d1e21a5aa69e2465808b3c38 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7ffed8c2731ab278702eb25a78e8d56a248c04b9 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d3035d56d532ead4d2cae24e66bfc9ceceb8b35a | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0ab38e9c2f608a08b7d5ae955cc2152ddf437b67 | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b888bbdc4d4b6c6f24c279879b52187a334d11ee | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c140eb2ff9ae243d21b4dfe88629ae1d234e2af1 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dfd5e2f2dad9f36c85b22d503b70b5d4923eaed7 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bf6843b11f127dd451e30f98dafc640e3f1c2882 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d199d6d83997092416a9a216406d4666c1e4ac66 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5a42c22f66d141dfecf1ed5878ceca66254a3f7e | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/191b3c05300b072b7d1f2679fa3fa72a1a128e94 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f04f6a8effe17880300bd387678408b9127a1fb5 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1523d4ae276630dc9d7730a9bcb31e9a2211e0 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/442d6c0be9aedbdcccff888e997f43f91f068726 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/941c5fdc711e64f420d091078c3401117627e217 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/59ae9f665a669ef1100944bb98d195b80e46c952 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b7873bbc278471d086c7a6d6ab0bdca387ec2f83 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/05f0ca8d22480df8a351e0ced43e20190934fa54 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/41dfb90ea473ecaa43965a6ab19409923a826cea | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e8ca89853f72be68a40cbef6e420f4233020fae0 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cfdec513ebfd6a216e9119412d47d7acc7a4eda3 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e23c4393e5bd18589f20ccd5233c3ca01408a0c1 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/42f9ed68b6a5f0ae6af51c1a01fc1e4f0dac9a4d | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/c23483e8b98aa63414fe78708f53df230f68452c | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/b535155f3529584d4b75206d88f9a1ad5ed91761 | arc | unknown | NOK | http://autobuild.buildroot.net/results/c6fa79f2f86a246f115831a7b2d9f7d6d1ba823f | armeb | unknown | NOK | http://autobuild.buildroot.net/results/d9e7ba23d385830cb2756b6b7b9791f8cb88ed64 | m68k | unknown | NOK | http://autobuild.buildroot.net/results/0c9432638f9e0f5343cd6b08e87abeae44fa1657 | arceb | unknown | NOK | http://autobuild.buildroot.net/results/55ae6d63e40516df1abb6ef37a705f2604c17d14 | arceb | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/8ac76c18c2fc4f3e2263b8fbe0e99075f7f8b7a6 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/732c1baa0f0a31c420231676e5ad44591494b7c7 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/10174ec91734c78a74907b015cd52568ec36b6f8 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/67cf195dfa937d89e0f489d06bfd468414384f6f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fa4aed94e94f48f1ae6de9cc1c66f60bb2e47a22 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bc5a3d085b3bd2cc3bfa607677cb6cd5ea7e7966 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4eeed19efdddb24eddc8b407ef0c470724e24795 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b5edb59bc87e7ceb019d422c63961129f30fca2d | ORPH xtensa | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/ef525951cd10ab587e0fbf240e03330d8bddad18 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/591a8cfa28b1c9bf4c409297ccdae7210de0a013 | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- frr-8.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | frr-8.1 | NOK | http://autobuild.buildroot.net/results/1675a5d749a8cbb199adc3128ca914996351051d | Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 1 host-pahole-73383b3a39afe86... | 1 igd2-for-linux-2.1 | 1 libglib2-2.72.3 | 1 open62541-v1.3.2 | 1 openssh-legal-info | 1 pistache-3ec9d7c4f8b828fdd3... | 1 python-sip-4.19.25 | 1 unknown | 1 volk-2.5.1 | 1 waffle-1.7.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/80f8939e67f72b780ae98733dafcb216826301aa | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1b98b6757b2d78b636fa07ac7253625986bf260a | sh4aeb | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/53df0773ece9005faea74c4f2c70b21548ba2929 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/217258f3ec31452cc101fe9d28237d409b674b04 | arceb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3fec2f94179c88c7181b2fb69236ffc08ccb86da | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/449945b46fae4338051366cdfe26ba8ae88d9b39 | armeb | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/6703faac5b9894f3a545241ff5ca119d7ba12181 | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/49fce75e077d926422242e622f7b5e63a8ed9c49 | ORPH arm | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/3fd0c2fd050c0a91d4f755151b68fc9f4811ce41 | ORPH arc | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/a9c0866b218817f315b3b2f490878c9ede19448b | arceb | unknown | NOK | http://autobuild.buildroot.net/results/aa431496a75cf7167faf064aab89085805ec1dd5 | arm | volk-2.5.1 | NOK | http://autobuild.buildroot.net/results/32ba29e7383f6b7c22ee99627d4e38b2367014c2 | riscv64 | waffle-1.7.0 | NOK | http://autobuild.buildroot.net/results/b8acabd3fa0c67d71b526b34e8f2a463d1bc0e4b | Gitlab CI results for 2022-10-21 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497934 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497944 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497964 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497967 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497969 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497974 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497977 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497982 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497987 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497990 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497992 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498000 | beelink_gs1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498032 | freescale_imx6dlsabresd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498071 | freescale_imx8mmevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498078 | freescale_imx8mnevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498079 | freescale_imx8mpevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498080 | freescale_imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498082 | freescale_imx8qmmek | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498084 | freescale_imx8qxpmek | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498085 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498090 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498091 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498092 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498093 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498094 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498095 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498097 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498098 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498099 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498109 | imx8mmpico | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 | imx8mpico | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498121 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498124 | kontron_pitx_imx8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498126 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498137 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498140 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498142 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498144 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498147 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498149 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498170 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498172 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498173 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498176 | olimex_a64_olinuxino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498195 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498205 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498209 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498210 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498215 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498216 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498219 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498220 | orangepi_zero_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498224 | orangepi_zero_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498222 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498226 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498229 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498232 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498234 | pine64_sopine | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498236 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498249 | qemu_ppc64_e5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498274 | qemu_ppc64_pseries | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498278 | qemu_ppc64le_powernv8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498280 | qemu_ppc64le_pseries | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498284 | qemu_ppc_bamboo | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498286 | qemu_ppc_e500mc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498287 | qemu_ppc_g3beige | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498291 | qemu_ppc_mac99 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498293 | qemu_ppc_mpc8544ds | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498294 | qemu_riscv32_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498296 | qemu_riscv64_nommu_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498297 | qemu_riscv64_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498298 | qemu_s390x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498301 | qemu_sh4_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498304 | qemu_sh4eb_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498307 | qemu_sparc64_sun4u | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498309 | qemu_sparc_ss10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498311 | qemu_x86 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498314 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498313 | qemu_xtensa_lx60 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498316 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498317 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498332 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498320 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498321 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498323 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498326 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498325 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498327 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498330 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498329 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498334 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498333 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498336 | riotboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498337 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498339 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498340 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498341 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498342 | rock_pi_n8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498343 | rockpro64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498345 | roseapplepi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498346 | s6lx9_microboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498347 | sheevaplug | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498349 | sipeed_maix_bit | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498350 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498352 | sipeed_maix_dock | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498353 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498354 | sipeed_maix_go | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498356 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498357 | sipeed_maixduino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498361 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498362 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498363 | snps_archs38_axs103 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498364 | snps_archs38_haps | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498365 | snps_archs38_hsdk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498366 | socrates_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498368 | solidrun_clearfog | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498369 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498370 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498371 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498372 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498373 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498375 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498376 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498377 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498379 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498380 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498382 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498383 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498384 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498385 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498387 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498388 | visionfive | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498389 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498390 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498391 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498392 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498394 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498395 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498396 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498398 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498399 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498400 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498401 | -- http://autobuild.buildroot.net From neal.frager at amd.com Sat Oct 22 08:26:45 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 02:26:45 -0600 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package Message-ID: <20221022082645.20505-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.mk | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..8ba91918f7 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" + +define HOST_BOOTGEN_BUILD_CMDS + $(HOST_MAKE_ENV) $(MAKE) $(BOOTGEN_EXTRA_CFLAGS) -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From neal.frager at amd.com Sat Oct 22 08:28:24 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 02:28:24 -0600 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package Message-ID: <20221022082824.35440-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.mk | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..8ba91918f7 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" + +define HOST_BOOTGEN_BUILD_CMDS + $(HOST_MAKE_ENV) $(MAKE) $(BOOTGEN_EXTRA_CFLAGS) -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From peter at korsgaard.com Sat Oct 22 09:09:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 22 Oct 2022 11:09:05 +0200 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022082824.35440-1-neal.frager@amd.com> (Neal Frager's message of "Sat, 22 Oct 2022 02:28:24 -0600") References: <20221022082824.35440-1-neal.frager@amd.com> Message-ID: <87a65o443y.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: Hi, > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > +################################################################################ > +# > +# bootgen > +# > +################################################################################ > + > +BOOTGEN_VERSION = xilinx_v2022.2 > +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) > +HOST_BOOTGEN_DEPENDENCIES = host-openssl > +BOOTGEN_LICENSE = Apache-2.0 > +BOOTGEN_LICENSE_FILES = LICENSE > + > +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" > +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" I have a package for bootgen as well at $WORK, where I instead use host-pkgcon which is a bit nicer than these hard coded values, E.G.: HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf define HOST_BOOTGEN_BUILD_CMDS $(MAKE) $(HOST_CONFIGURE_OPTS) \ LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ -C $(@D) endef Bootgen also use modern C++ features, so we need to pass -std=c++0x to fix building on older host machines, E.G.: CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" I also had issues with linking with the embedded copy of flex if the build host has the flex development package installed unless I add the following patch, which unfortunately is still not merged: https://github.com/Xilinx/bootgen/pull/20 Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. -- Bye, Peter Korsgaard From neal.frager at amd.com Sat Oct 22 09:22:39 2022 From: neal.frager at amd.com (Frager, Neal) Date: Sat, 22 Oct 2022 09:22:39 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <87a65o443y.fsf@dell.be.48ers.dk> References: <20221022082824.35440-1-neal.frager@amd.com> <87a65o443y.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, Thank you for the quick feedback. > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > +################################################################################ > +# > +# bootgen > +# > +################################################################################ > + > +BOOTGEN_VERSION = xilinx_v2022.2 > +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) > +HOST_BOOTGEN_DEPENDENCIES = host-openssl > +BOOTGEN_LICENSE = Apache-2.0 > +BOOTGEN_LICENSE_FILES = LICENSE > + > +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" > +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" > I have a package for bootgen as well at $WORK, where I instead use host-pkgcon which is a bit nicer than these hard coded values, E.G.: What do you mean by $WORK? > HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf > define HOST_BOOTGEN_BUILD_CMDS > $(MAKE) $(HOST_CONFIGURE_OPTS) \ > LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ > INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ > -C $(@D) > endef Ok. I will update this for v2. > Bootgen also use modern C++ features, so we need to pass -std=c++0x to fix building on older host machines, E.G.: > CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" Ok. I will update this for v2. > I also had issues with linking with the embedded copy of flex if the build host has the flex development package installed unless I add the following patch, which unfortunately is still not merged: > https://github.com/Xilinx/bootgen/pull/20 Thank you for sharing. I will push this internally to see if we can get this prioritized. > Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. Would you mind giving me instructions for generating the bootgen.hash, so I do not need to search for it? Thank you for your help! Best regards, Neal Frager AMD From peter at korsgaard.com Sat Oct 22 09:52:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 22 Oct 2022 11:52:01 +0200 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: (Neal Frager's message of "Sat, 22 Oct 2022 09:22:39 +0000") References: <20221022082824.35440-1-neal.frager@amd.com> <87a65o443y.fsf@dell.be.48ers.dk> Message-ID: <875ygc424e.fsf@dell.be.48ers.dk> >>>>> "Frager," == Frager, Neal writes: Hi, >> I have a package for bootgen as well at $WORK, where I instead use >> host-pkgcon which is a bit nicer than these hard coded values, E.G.: > What do you mean by $WORK? Simply that I have done it for an internal Buildroot external tree that I use at work. >> I also had issues with linking with the embedded copy of flex if the >> build host has the flex development package installed unless I add >> the following patch, which unfortunately is still not merged: >> https://github.com/Xilinx/bootgen/pull/20 > Thank you for sharing. I will push this internally to see if we can get this prioritized. Thanks! >> Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. > Would you mind giving me instructions for generating the bootgen.hash, so I do not need to search for it? It is simply a question of running sha256sum on the tarball and LICENSE files. See https://buildroot.org/downloads/manual/manual.html#adding-packages-hash for details. -- Bye, Peter Korsgaard From neal.frager at amd.com Sat Oct 22 11:22:43 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 05:22:43 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package Message-ID: <20221022112243.31889-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- V1->V2: - improved build statement to support older hosts - added bootgen.hash --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.hash | 3 +++ package/bootgen/bootgen.mk | 25 +++++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.hash create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.hash b/package/bootgen/bootgen.hash new file mode 100644 index 0000000000..5d77c164f3 --- /dev/null +++ b/package/bootgen/bootgen.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 7e07c75aa3e3965c8e33faefde037877f78130451cebc2056b096db9c66acbb3 bootgen-xilinx_v2022.2.tar.gz +sha256 4da5f5eff0592e5d275f1871faf9e9a4fc0f6346027bfb777fa59d0aa6a59aa3 LICENSE diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..4589bf019f --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,25 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +define HOST_BOOTGEN_BUILD_CMDS + $(MAKE) $(HOST_CONFIGURE_OPTS) \ + LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ + INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ + CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" \ + -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From ju.o at free.fr Sat Oct 22 14:20:40 2022 From: ju.o at free.fr (Julien Olivain) Date: Sat, 22 Oct 2022 16:20:40 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m,mm}pico: disable ATF SSP Message-ID: <20221022142040.625468-1-ju.o@free.fr> imx8{m,mm}pico configs are currently failing at ATF link with output: aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' The ATF version in those configs does not provide platform level support for SSP. This build failure was introduced by commit 09acc7cbc91f50305730ca0690a58fb93529034b "boot/arm-trusted-firmware: fix SSP support". Before this commit, ATF SSP was globally disabled, by default. This commit fixes those build issues by disabling the ATF SSP in the defconfigs. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 Signed-off-by: Julien Olivain --- configs/imx8mmpico_defconfig | 1 + configs/imx8mpico_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/imx8mmpico_defconfig b/configs/imx8mmpico_defconfig index 7c19c8c81b..55fd2d01c1 100644 --- a/configs/imx8mmpico_defconfig +++ b/configs/imx8mmpico_defconfig @@ -22,6 +22,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/e BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="lf-5.10.72-2.2.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y diff --git a/configs/imx8mpico_defconfig b/configs/imx8mpico_defconfig index 55746fb67e..d7e5b6273a 100644 --- a/configs/imx8mpico_defconfig +++ b/configs/imx8mpico_defconfig @@ -22,6 +22,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/e BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="lf-5.10.72-2.2.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -- 2.38.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:10:52 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:10:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221022201052.28903-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Config.in.legacy | 7 +++++++ package/usbredir/Config.in | 12 ------------ package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 16 +--------------- 4 files changed, 10 insertions(+), 29 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..39b00547c8 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,13 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + help + usbredirserver has been dropped by upstream since version + 0.13.0 + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..2190cb88ac 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR 'y' below if you want the server too. http://www.spice-space.org/page/UsbRedir - -if BR2_PACKAGE_USBREDIR - -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" - help - If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. - - Note: the server is not required to use the library. - -endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..6d5a80cbf9 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ -Dtests=disabled \ -Dtools=disabled -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) - -USBREDIR_LICENSE += , GPL-2.0+ (program) -USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER - $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:28:57 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:28:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: bump to version 1.1.2 Message-ID: <20221022202857.128289-1-fontaine.fabrice@gmail.com> https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md Signed-off-by: Fabrice Fontaine --- package/usbguard/usbguard.hash | 4 ++-- package/usbguard/usbguard.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/usbguard/usbguard.hash b/package/usbguard/usbguard.hash index a69240b3f9..6c10dc9d3e 100644 --- a/package/usbguard/usbguard.hash +++ b/package/usbguard/usbguard.hash @@ -1,5 +1,5 @@ -# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.1/usbguard-1.1.1.tar.gz.sum -sha256 460ebfb4ffc5609739a202a3a1d9fda1c30de033b634845b8baa136352bfb432 usbguard-1.1.1.tar.gz +# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.2/usbguard-1.1.2.tar.gz.sum +sha256 dcf5c90f3f93030e04df1baeb8d388b678c40dd48b135ea12a7be7dee8944934 usbguard-1.1.2.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index 614b7d655d..ca539a55f5 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBGUARD_VERSION = 1.1.1 +USBGUARD_VERSION = 1.1.2 USBGUARD_SITE = https://github.com/USBGuard/usbguard/releases/download/usbguard-$(USBGUARD_VERSION) USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:30:52 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:30:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/uftp: bump to version 5.0.1 Message-ID: <20221022203052.129715-1-fontaine.fabrice@gmail.com> Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine --- package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..774981d162 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:33:35 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:33:35 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/uftp: bump to version 5.0.1 Message-ID: <20221022203335.131939-1-fontaine.fabrice@gmail.com> Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Update tarball hash package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..e47cba9394 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 f0435fbc8e9ffa125e05600cb6c7fc933d7d587f5bae41b257267be4f2ce0e61 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:41:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:41:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/valijson: bump to version 0.7 Message-ID: <20221022204144.137169-1-fontaine.fabrice@gmail.com> https://github.com/tristanpenman/valijson/releases/tag/v0.7 Signed-off-by: Fabrice Fontaine --- package/valijson/valijson.hash | 2 +- package/valijson/valijson.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/valijson/valijson.hash b/package/valijson/valijson.hash index 0aab93dd2a..aacdf7dedc 100644 --- a/package/valijson/valijson.hash +++ b/package/valijson/valijson.hash @@ -1,3 +1,3 @@ # Locally Computed: -sha256 e06bf78fc1d26d4956fabc182408ebbbc47e3a6699778cda4aa439c2a6110b09 valijson-0.6.tar.gz +sha256 bc24736709acfb252a5fdcb5145f1f2670c7aecaba3356f6f8ba54903800fa5c valijson-0.7.tar.gz sha256 1a0f99926a2dbec30eba3db820236d9953fbe3048976923ac24980e655fbe991 LICENSE diff --git a/package/valijson/valijson.mk b/package/valijson/valijson.mk index 4b1f722f77..51a9353960 100644 --- a/package/valijson/valijson.mk +++ b/package/valijson/valijson.mk @@ -4,7 +4,7 @@ # ################################################################################ -VALIJSON_VERSION = 0.6 +VALIJSON_VERSION = 0.7 VALIJSON_SITE = $(call github,tristanpenman,valijson,v$(VALIJSON_VERSION)) VALIJSON_LICENSE = BSD-2-Clause VALIJSON_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:46:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:46:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/vnstat: bump to version 2.10 Message-ID: <20221022204631.147518-1-fontaine.fabrice@gmail.com> https://github.com/vergoh/vnstat/blob/v2.10/CHANGES Signed-off-by: Fabrice Fontaine --- package/vnstat/vnstat.hash | 2 +- package/vnstat/vnstat.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/vnstat/vnstat.hash b/package/vnstat/vnstat.hash index 191dc4ec0b..bad4325d90 100644 --- a/package/vnstat/vnstat.hash +++ b/package/vnstat/vnstat.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 03f858a7abf6bd85bb8cd595f3541fc3bd31f8f400ec092ef3034825ccb77c25 vnstat-2.8.tar.gz +sha256 a9c61744e5cd8c366e2db4d282badc74021ddb614bd65b41240937997e457d25 vnstat-2.10.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/vnstat/vnstat.mk b/package/vnstat/vnstat.mk index 91f0233f56..3b2951b8c9 100644 --- a/package/vnstat/vnstat.mk +++ b/package/vnstat/vnstat.mk @@ -4,7 +4,7 @@ # ################################################################################ -VNSTAT_VERSION = 2.8 +VNSTAT_VERSION = 2.10 VNSTAT_SITE = http://humdi.net/vnstat VNSTAT_LICENSE = GPL-2.0 VNSTAT_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:53:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:53:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/whois: bump to version 5.5.14 Message-ID: <20221022205311.152019-1-fontaine.fabrice@gmail.com> Signed-off-by: Fabrice Fontaine --- package/whois/whois.hash | 4 ++-- package/whois/whois.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/whois/whois.hash b/package/whois/whois.hash index 3b5bbee23d..fb140fa198 100644 --- a/package/whois/whois.hash +++ b/package/whois/whois.hash @@ -1,5 +1,5 @@ -# From http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois/whois_5.5.13.dsc -sha256 62e613f116d5635aea6684238db00b030a6602ffc79462e4a0a8e62cb184b5d7 whois_5.5.13.tar.xz +# From http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois/whois_5.5.14.dsc +sha256 bf9c2cb307d5419b34ad401eecf2820b8f69660db41cf0762e5da71fa2df68e8 whois_5.5.14.tar.xz # Hash for license file: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/whois/whois.mk b/package/whois/whois.mk index 42a9e83954..5a85bea358 100644 --- a/package/whois/whois.mk +++ b/package/whois/whois.mk @@ -4,8 +4,8 @@ # ################################################################################ -WHOIS_VERSION = 5.5.13 -WHOIS_SITE = http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois +WHOIS_VERSION = 5.5.14 +WHOIS_SITE = http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz WHOIS_DEPENDENCIES = \ host-pkgconf \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:59:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:59:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinyssh: bump to version 20220801 Message-ID: <20221022205934.156714-1-fontaine.fabrice@gmail.com> https://github.com/janmojzis/tinyssh/releases/tag/20220101 https://github.com/janmojzis/tinyssh/releases/tag/20220222 https://github.com/janmojzis/tinyssh/releases/tag/20220305 https://github.com/janmojzis/tinyssh/releases/tag/20220311 https://github.com/janmojzis/tinyssh/releases/tag/20220801 Signed-off-by: Fabrice Fontaine --- package/tinyssh/tinyssh.hash | 2 +- package/tinyssh/tinyssh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tinyssh/tinyssh.hash b/package/tinyssh/tinyssh.hash index 30b5d13419..462ffb9002 100644 --- a/package/tinyssh/tinyssh.hash +++ b/package/tinyssh/tinyssh.hash @@ -1,3 +1,3 @@ # locally computed -sha256 2a051437878998c7782d9d38ef13e5e7a76435ae6b9c3e9ec492c3a567bd6314 tinyssh-20210601.tar.gz +sha256 234656fc8d369608eb5d0f3a26280e0e38e2e6b134cfc610b6e24bce176acd4f tinyssh-20220801.tar.gz sha256 b5dc19477e29f4111e1c16cd89ec0782f5a07b1a30e3bdb7c155425b81b12c46 LICENCE diff --git a/package/tinyssh/tinyssh.mk b/package/tinyssh/tinyssh.mk index 05716bcfe1..1472f7ead1 100644 --- a/package/tinyssh/tinyssh.mk +++ b/package/tinyssh/tinyssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -TINYSSH_VERSION = 20210601 +TINYSSH_VERSION = 20220801 TINYSSH_SITE = $(call github,janmojzis,tinyssh,$(TINYSSH_VERSION)) TINYSSH_LICENSE = Public Domain, CC0-1.0 TINYSSH_LICENSE_FILES = LICENCE -- 2.35.1 From ps.report at gmx.net Sat Oct 22 21:15:22 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Sat, 22 Oct 2022 23:15:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022201052.28903-1-fontaine.fabrice@gmail.com> References: <20221022201052.28903-1-fontaine.fabrice@gmail.com> Message-ID: <20221022231522.1d63bec4@gmx.net> Hello Fabrice, On Sat, 22 Oct 2022 22:10:52 +0200, Fabrice Fontaine wrote: > usbredirserver was dropped by > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Time to enable tools/usbredirect as it seems to be the replacement for usbredirserver (according to [1])? Regards, Peter [1] https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/2 > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > Signed-off-by: Fabrice Fontaine > --- > Config.in.legacy | 7 +++++++ > package/usbredir/Config.in | 12 ------------ > package/usbredir/usbredir.hash | 4 ++-- > package/usbredir/usbredir.mk | 16 +--------------- > 4 files changed, 10 insertions(+), 29 deletions(-) > > diff --git a/Config.in.legacy b/Config.in.legacy > index 0e63d59a98..39b00547c8 100644 > --- a/Config.in.legacy > +++ b/Config.in.legacy > @@ -146,6 +146,13 @@ endif > > comment "Legacy options removed in 2022.11" > > +config BR2_PACKAGE_USBREDIR_SERVER > + bool "usbredirserver removed" > + select BR2_LEGACY > + help > + usbredirserver has been dropped by upstream since version > + 0.13.0 > + > config BR2_KERNEL_HEADERS_5_17 > bool "kernel headers version 5.17.x are no longer supported" > select BR2_LEGACY > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > index 8ce180a884..2190cb88ac 100644 > --- a/package/usbredir/Config.in > +++ b/package/usbredir/Config.in > @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR > 'y' below if you want the server too. > > http://www.spice-space.org/page/UsbRedir > - > -if BR2_PACKAGE_USBREDIR > - > -config BR2_PACKAGE_USBREDIR_SERVER > - bool "usbredirserver on target" > - help > - If you want to serve usbredir requests on your target, say > - 'y' here to have the usbredir server on the target. > - > - Note: the server is not required to use the library. > - > -endif > diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash > index f738c36690..577e08efba 100644 > --- a/package/usbredir/usbredir.hash > +++ b/package/usbredir/usbredir.hash > @@ -1,5 +1,5 @@ > -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz > +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz > > # Hash for license files > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > index 6792a3e758..6d5a80cbf9 100644 > --- a/package/usbredir/usbredir.mk > +++ b/package/usbredir/usbredir.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -USBREDIR_VERSION = 0.12.0 > +USBREDIR_VERSION = 0.13.0 > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > USBREDIR_SITE = http://spice-space.org/download/usbredir > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ > -Dtests=disabled \ > -Dtools=disabled > > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > - > -USBREDIR_LICENSE += , GPL-2.0+ (program) > -USBREDIR_LICENSE_FILES += COPYING > - > -else # BR2_PACKAGE_USBREDIR_SERVER != y > - > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > -endef > -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - > -endif # BR2_PACKAGE_USBREDIR_SERVER > - > $(eval $(meson-package)) From fontaine.fabrice at gmail.com Sat Oct 22 21:18:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:18:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/stress: bump to version 1.0.5 Message-ID: <20221022211858.166130-1-fontaine.fabrice@gmail.com> Switch to an active fork: "The original stress went unmaintained; the source of the last version, 1.0.4, was imported from Debian. After, patches from Debian and other changes were applied to create the 1.0.5 release. The details of each release are registered in the ChangeLog file. Now, stress is maintained by volunteers under Resurrecting Open Source Projects." https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog Signed-off-by: Fabrice Fontaine --- package/stress/Config.in | 2 +- package/stress/stress.hash | 3 +-- package/stress/stress.mk | 6 ++++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/package/stress/Config.in b/package/stress/Config.in index b22c3f19bb..32a3e264bc 100644 --- a/package/stress/Config.in +++ b/package/stress/Config.in @@ -6,4 +6,4 @@ config BR2_PACKAGE_STRESS It imposes a configurable amount of CPU, memory, I/O, and disk stress on the system. - http://people.seas.harvard.edu/~apw/stress/ + https://github.com/resurrecting-open-source-projects/stress/ diff --git a/package/stress/stress.hash b/package/stress/stress.hash index 8d14d053fb..dc1785b6c7 100644 --- a/package/stress/stress.hash +++ b/package/stress/stress.hash @@ -1,4 +1,3 @@ -# Locally calculated after checking pgp signature -sha256 057e4fc2a7706411e1014bf172e4f94b63a12f18412378fca8684ca92408825b stress-1.0.4.tar.gz # Locally computed +sha256 1798e49ca365d928fb194ba1b8e8d1e09963b49e9edb0a78bcbba15750bb5027 stress-1.0.5.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/stress/stress.mk b/package/stress/stress.mk index 4d2d4cb838..99a50f349e 100644 --- a/package/stress/stress.mk +++ b/package/stress/stress.mk @@ -4,10 +4,12 @@ # ################################################################################ -STRESS_VERSION = 1.0.4 -STRESS_SITE = http://people.seas.harvard.edu/~apw/stress +STRESS_VERSION = 1.0.5 +STRESS_SITE = $(call github,resurrecting-open-source-projects,stress,$(STRESS_VERSION)) STRESS_LICENSE = GPL-2.0+ STRESS_LICENSE_FILES = COPYING +# From git +STRESS_AUTORECONF = YES # Stress is linked statically if the --enable-static is specified. # However, this option is always specified in the global -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 21:24:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:24:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022231522.1d63bec4@gmx.net> References: <20221022201052.28903-1-fontaine.fabrice@gmail.com> <20221022231522.1d63bec4@gmx.net> Message-ID: Hello Peter, Le sam. 22 oct. 2022 ? 23:15, Peter Seiderer a ?crit : > Hello Fabrice, > > On Sat, 22 Oct 2022 22:10:52 +0200, Fabrice Fontaine < > fontaine.fabrice at gmail.com> wrote: > > > usbredirserver was dropped by > > > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 > > Time to enable tools/usbredirect as it seems to be the replacement for > usbredirserver > (according to [1])? > Indeed, I'll send a v2. > > Regards, > Peter > > [1] https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/2 > > > > > > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > > > Signed-off-by: Fabrice Fontaine > > --- > > Config.in.legacy | 7 +++++++ > > package/usbredir/Config.in | 12 ------------ > > package/usbredir/usbredir.hash | 4 ++-- > > package/usbredir/usbredir.mk | 16 +--------------- > > 4 files changed, 10 insertions(+), 29 deletions(-) > > > > diff --git a/Config.in.legacy b/Config.in.legacy > > index 0e63d59a98..39b00547c8 100644 > > --- a/Config.in.legacy > > +++ b/Config.in.legacy > > @@ -146,6 +146,13 @@ endif > > > > comment "Legacy options removed in 2022.11" > > > > +config BR2_PACKAGE_USBREDIR_SERVER > > + bool "usbredirserver removed" > > + select BR2_LEGACY > > + help > > + usbredirserver has been dropped by upstream since version > > + 0.13.0 > > + > > config BR2_KERNEL_HEADERS_5_17 > > bool "kernel headers version 5.17.x are no longer supported" > > select BR2_LEGACY > > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > > index 8ce180a884..2190cb88ac 100644 > > --- a/package/usbredir/Config.in > > +++ b/package/usbredir/Config.in > > @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR > > 'y' below if you want the server too. > > > > http://www.spice-space.org/page/UsbRedir > > - > > -if BR2_PACKAGE_USBREDIR > > - > > -config BR2_PACKAGE_USBREDIR_SERVER > > - bool "usbredirserver on target" > > - help > > - If you want to serve usbredir requests on your target, say > > - 'y' here to have the usbredir server on the target. > > - > > - Note: the server is not required to use the library. > > - > > -endif > > diff --git a/package/usbredir/usbredir.hash > b/package/usbredir/usbredir.hash > > index f738c36690..577e08efba 100644 > > --- a/package/usbredir/usbredir.hash > > +++ b/package/usbredir/usbredir.hash > > @@ -1,5 +1,5 @@ > > -# > https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > > -sha256 > fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d > usbredir-0.12.0.tar.xz > > +# > https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > > +sha256 > 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e > usbredir-0.13.0.tar.xz > > > > # Hash for license files > > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > > index 6792a3e758..6d5a80cbf9 100644 > > --- a/package/usbredir/usbredir.mk > > +++ b/package/usbredir/usbredir.mk > > @@ -4,7 +4,7 @@ > > # > > > ################################################################################ > > > > -USBREDIR_VERSION = 0.12.0 > > +USBREDIR_VERSION = 0.13.0 > > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > > USBREDIR_SITE = http://spice-space.org/download/usbredir > > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > > @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ > > -Dtests=disabled \ > > -Dtools=disabled > > > > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > > - > > -USBREDIR_LICENSE += , GPL-2.0+ (program) > > -USBREDIR_LICENSE_FILES += COPYING > > - > > -else # BR2_PACKAGE_USBREDIR_SERVER != y > > - > > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > > -endef > > -USBREDIR_POST_INSTALL_TARGET_HOOKS += > USBREDIR_POST_INSTALL_TARGET_RM_SERVER > > - > > -endif # BR2_PACKAGE_USBREDIR_SERVER > > - > > $(eval $(meson-package)) > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 22 21:44:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:44:39 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221022214439.174830-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Add an option to enable tools (and usbredirect binary) as a replacement to usbredirserver https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2 (after review of Peter Seiderer): - Add an option to enable tools Config.in.legacy | 9 +++++++++ package/usbredir/Config.in | 11 ++++++----- package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 21 +++++++-------------- 4 files changed, 24 insertions(+), 21 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..efe35fde36 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,15 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + select BR2_PACKAGE_USBREDIR_TOOLS + help + usbredirserver has been dropped by upstream since version + 0.13.0. usbredir tools (which include usbredirect binary) has + been selected instead. + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..d546ac1025 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -15,18 +15,19 @@ config BR2_PACKAGE_USBREDIR protocol. Note: only the library is installed, not the utilities. Say - 'y' below if you want the server too. + 'y' below if you want the tools too. http://www.spice-space.org/page/UsbRedir if BR2_PACKAGE_USBREDIR -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" +config BR2_PACKAGE_USBREDIR_TOOLS + bool "Enable tools" help If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. + 'y' here to have the tools built and installed on the target + (including usbredirect binary). - Note: the server is not required to use the library. + Note: the tools are not required to use the library. endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..172f0d52a0 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -14,21 +14,14 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb USBREDIR_CONF_OPTS = \ -Dgit_werror=disabled \ -Dstack_protector=disabled \ - -Dtests=disabled \ - -Dtools=disabled - -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) + -Dtests=disabled +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) USBREDIR_LICENSE += , GPL-2.0+ (program) USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER +USBREDIR_CONF_OPTS += -Dtools=enabled +else +USBREDIR_CONF_OPTS += -Dtools=disabled +endif $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 22:08:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 00:08:07 +0200 Subject: [Buildroot] [PATCH 1/2] package/lv2: bump to version 1.18.10 Message-ID: <20221022220808.191363-1-fontaine.fabrice@gmail.com> - Update hash of COPYING (standard ISC text used since https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) - meson must be used since https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab https://github.com/lv2/lv2/blob/v1.18.10/NEWS Signed-off-by: Fabrice Fontaine --- package/lv2/lv2.hash | 6 +++--- package/lv2/lv2.mk | 13 ++++++------- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/package/lv2/lv2.hash b/package/lv2/lv2.hash index ed21620bee..0814958887 100644 --- a/package/lv2/lv2.hash +++ b/package/lv2/lv2.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://lv2plug.in/spec/lv2-1.18.2.tar.bz2.asc -sha256 4e891fbc744c05855beb5dfa82e822b14917dd66e98f82b8230dbd1c7ab2e05e lv2-1.18.2.tar.bz2 -sha256 0b0b07d852e3ce7fa04986e141f73001bd7f260683968f0a19e02dbcc4131aa6 COPYING +# https://lv2plug.in/spec/lv2-1.18.10.tar.xz.sig +sha256 78c51bcf21b54e58bb6329accbb4dae03b2ed79b520f9a01e734bd9de530953f lv2-1.18.10.tar.xz +sha256 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841 COPYING diff --git a/package/lv2/lv2.mk b/package/lv2/lv2.mk index 13ffaa34b0..2dde9b907c 100644 --- a/package/lv2/lv2.mk +++ b/package/lv2/lv2.mk @@ -4,18 +4,17 @@ # ################################################################################ -LV2_VERSION = 1.18.2 +LV2_VERSION = 1.18.10 LV2_SITE = https://lv2plug.in/spec -LV2_SOURCE = lv2-$(LV2_VERSION).tar.bz2 +LV2_SOURCE = lv2-$(LV2_VERSION).tar.xz LV2_LICENSE = ISC LV2_LICENSE_FILES = COPYING LV2_DEPENDENCIES = host-pkgconf LV2_INSTALL_STAGING = YES LV2_CONF_OPTS += \ - --no-coverage \ - --no-check-links \ - --copy-headers + -Ddocs=disabled \ + -Dtests=disabled ifeq ($(BR2_PACKAGE_CAIRO),y) LV2_DEPENDENCIES += cairo @@ -30,7 +29,7 @@ LV2_DEPENDENCIES += libgtk2 endif ifeq ($(BR2_STATIC_LIBS),y) -LV2_CONF_OPTS += --no-plugins +LV2_CONF_OPTS += -Dplugins=disabled endif -$(eval $(waf-package)) +$(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 22:08:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 00:08:08 +0200 Subject: [Buildroot] [PATCH 2/2] package/sratom: bump to version 0.6.14 In-Reply-To: <20221022220808.191363-1-fontaine.fabrice@gmail.com> References: <20221022220808.191363-1-fontaine.fabrice@gmail.com> Message-ID: <20221022220808.191363-2-fontaine.fabrice@gmail.com> - Update hash of COPYING (standard ISC licence used since https://github.com/lv2/sratom/commit/145ed2fe9756f707d9fd5f03ada5327d04e1b972) - meson must be used since https://github.com/lv2/sratom/commit/75e647def0f67647ec7ba1405e26d809a87c62fc https://github.com/lv2/sratom/blob/v0.6.14/NEWS Signed-off-by: Fabrice Fontaine --- package/sratom/sratom.hash | 6 +++--- package/sratom/sratom.mk | 12 ++++-------- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/package/sratom/sratom.hash b/package/sratom/sratom.hash index 64d460b2ea..3b8fa65300 100644 --- a/package/sratom/sratom.hash +++ b/package/sratom/sratom.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://download.drobilla.net/sratom-0.6.8.tar.bz2.asc -sha256 3acb32b1adc5a2b7facdade2e0818bcd6c71f23f84a1ebc17815bb7a0d2d02df sratom-0.6.8.tar.bz2 -sha256 3fc429d6b944fa20306357196a28bb4dd7c25e2d67edebec771f44de5bd7f9e8 COPYING +# https://download.drobilla.net/sratom-0.6.14.tar.xz.sig +sha256 9982faf40db83aedd9b3850e499fecd6852b8b4ba6dede514013655cffaca1e6 sratom-0.6.14.tar.xz +sha256 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597 COPYING diff --git a/package/sratom/sratom.mk b/package/sratom/sratom.mk index e1e0f4e033..25e7a091b3 100644 --- a/package/sratom/sratom.mk +++ b/package/sratom/sratom.mk @@ -4,18 +4,14 @@ # ################################################################################ -SRATOM_VERSION = 0.6.8 +SRATOM_VERSION = 0.6.14 SRATOM_SITE = https://download.drobilla.net -SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.bz2 +SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.xz SRATOM_LICENSE = ISC SRATOM_LICENSE_FILES = COPYING SRATOM_DEPENDENCIES = host-pkgconf lv2 serd sord SRATOM_INSTALL_STAGING = YES -SRATOM_CONF_OPTS += --no-coverage +SRATOM_CONF_OPTS += -Ddocs=disabled -Dtests=disabled -ifeq ($(BR2_STATIC_LIBS),y) -SRATOM_CONF_OPTS += --static --no-shared -endif - -$(eval $(waf-package)) +$(eval $(meson-package)) -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 23 05:34:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 23 Oct 2022 05:34:52 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-22 Message-ID: <20221023053459.0254A60BB9@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-22 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 3 | 0 | 6 | 2022.08.x | 7 | 16 | 0 | 23 | master | 115 | 227 | 7 | 349 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 13 libnss-3.84 | 11 host-sentry-cli-1.59.0 | 10 host-f2fs-tools-1.15.0 | 9 systemd-250.4 | 9 sysvinit-2.99 | 9 brltty | 7 igd2-for-linux-2.1 | 7 btrfs-progs-5.16.2 | 6 gerbera-1.10.0 | 6 glibc-2.36-44-g2628500f5dff... | 6 dahdi-linux-5c840cf43838e06... | 5 host-binutils-2.38 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 4 host-rust-1.64.0 | 4 linux-6.0.1 | 4 perl-5.34.1 | 4 unknown | 4 autofs-5.1.8 | 3 batman-adv-2021.4 | 3 efivar-38 | 3 gensio-2.5.5 | 3 libgpg-error-1.45 | 3 lxc-4.0.12 | 3 procps-ng-3.3.17 | 3 wolfssl-5.5.1 | 3 xz-5.2.7 | 3 botan-2.19.2 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 fs/cpio/cpio.mk:117: /tmp/i... | 2 fs/cpio/cpio.mk:117: /tmp/i... | 2 host-binutils-2.37 | 2 libarchive-3.6.1 | 2 libglib2-2.72.3 | 2 linux-5.10.145-cip17-rt7 | 2 ntp-4.2.8p15 | 2 sdl-1.2.15 | 2 volk-2.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 boost-1.80.0 | 1 bullet-3.21 | 1 check-0.15.2 | 1 collectd-5.12.0 | 1 containerd-1.6.8 | 1 dash-0.5.11.5 | 1 dawgdic-16ac537ba9883ff01b6... | 1 dieharder-3.31.1 | 1 elfutils-0.186 | 1 erlang-22.3.4.22 | 1 fdk-aac-2.0.2 | 1 file-5.41 | 1 flannel-0.14.0 | 1 freeradius-client-1.1.7 | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gnu-efi-3.0.15 | 1 gobject-introspection-1.72.0 | 1 host-gcc-final-11.3.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 libcap-ng-0.8.3 | 1 libcpprestsdk-2.10.18 | 1 libcurl-7.84.0 | 1 libdcadec-0.2.0 | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libmdbx-0.11.12 | 1 libsigc-3.2.0 | 1 libvorbis-1.3.7 | 1 lttng-babeltrace-1.5.7 | 1 lttng-tools-2.13.2 | 1 luvi-2.13.0 | 1 makedumpfile-1.7.0 | 1 mariadb-10.3.36 | 1 matio-1.5.22 | 1 mender-3.4.0 | 1 ne10-1.2.1 | 1 nodejs-16.17.1 | 1 ntpsec-1_2_1 | 1 ocf-linux-20171122 | 1 openal-1.22.0 | 1 php-8.1.11 | 1 pixz-1.0.7 | 1 poppler-21.12.0 | 1 pv-1.6.20 | 1 rtl8821au-4235b0ec7d7220a63... | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/97b8a22267c5f5937e9b70beff19ddb3d19b672d | riscv32 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/d0455bd72accea4bb1ec36b96008ed5c7965631f | mips64el | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/a03c7c4cf7b92c5a836be9c6e1e9c99bd7951657 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6f42eeabc6c78a6ff5e02466f0c105512b19354c | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/212049ce3068eec03c1552e0475df91769b07a2e | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/710fb00e0067a03a9406a9fbab0ab0c10c7b8cce | microblaze | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/d0a7fa247b1b5d8d615143808b06b97af5ec88aa | or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/945ef6fe73e29d12412d7c7536d3d77f60f9883f | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/538e1f2ffff989105ef404994e13cc71b0a1e81a | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/6d05efc42e9be3afecc20325b4858055a732fde6 | mipsel | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/cdc7ff2a17f2e9b0daaf2081c46746d8b5110c64 | ORPH mips | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/e02648e66e5ef1a82e781997d60bc24bc0b069e5 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/e50235040f5b62a79588229a64c0d789411f0c8b | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d001edfc3f70d1efd506bba91c304b3f77a5dd62 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/2e9850c766ec06d26607e9bf30b8abd5f7523160 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/ee325a61a0dd0b6564a219093c0c4f1f7345ec38 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/81ee6368e90e86f16d2c2db34a82ea60566c5e72 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/2d06828b3df51b4e18d7a422174f4ffd4c8f0c0c | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/4a52b2eaf2354feee49604b42d9440c67757e20e | sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5db6f81c741a1fb8a1b2f8651beeea28aded17a0 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e49c8795cb956f32705fbc6535b4d4c107621104 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ea16778b993f85450d8cf06da249d7930bb831e | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5c7ea6f7d1790a7140b59ef75c20a6c5a66687b9 | ORPH riscv32 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/89dacc23bf62f569b24fbc95b0104bb5039d205a | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ad27ea177ac34a95916671eede6227aba5137efd | ORPH powerpc64 | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/b3a6fbb6be6ccdbb2e3847608c7317f581be1069 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/bb2f0a10eeffc99900bfbaaa6cedd8eccea57b62 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/f96b8e3472c40da3ef09b064372370f6fa91b92e | sh4aeb | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/18bba18baac8621e1d1463b13755aa3fe21b2257 | ORPH or1k | collectd-5.12.0 | NOK | http://autobuild.buildroot.net/results/fbfa60672ff03fed148956d52a985aa4b12c9454 | x86_64 | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/a76c7280798855f638336524bd5bc392659b4ba7 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/85d93ed6fcc3dfabded76c8d3740a058d4350d2b | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6ef0e324ac7afda61fc43ac355841c210c4f41a7 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4bbc5ab949fd4a69b90086e07c1029d4c82cda07 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4cc41728b3d640d6f122984708622d6dcf790fbd | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2a6eb0bbe94332ec8d1b91fb68c3928057b3c308 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f661f320fbf812503747257b88fa051410087abf | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/70604ba9bc2dc5905860cfa8b63a4538051ca44d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c5fd5b2f7198d041d4baf1957fda19988e864f92 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/69fa7b34c1f2e2f5fea3c93c1703c8331b4c67fa | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0babc4832984b554ae98037cd19bbd49122f0d0 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7331d71e2a23b1dad10e4cf2966608383dc39b9d | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dbe0ac17f2186f47b854e90c92eb13f1131c2bb5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5188fbbdab2a14de3b8e11e43c7a2e8ebaad85b7 | mipsel | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c3508cdf7df2845d4bad866b7d1c06c8dd855d0c | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f92e16818e1d01f0479df8a96962a357f3ef9425 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8f4c913a3ab059c541d7976a211cf86cb4601c23 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5eb06f2930c5350a8c17605a16c8a57efee50c24 | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ab5a35c211a91b23cbd56df110c52227a84b5987 | microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e7db6d74424845ba9d41b95b1d6c1952ce062a6 | ORPH riscv64 | dawgdic-16ac537ba9883ff01b6... | NOK | http://autobuild.buildroot.net/results/1ee035de3d3218f521c2fe11bf797317e87fb738 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/28ec2bf5be1623bdc7805a6e35e4f7062671f34f | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d428b124ec2701802ac2f56ab35d9cfd12e16d2d | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/dfd02f6a97777872d10dfe7cb983b9e1f9edd8d2 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/4fa13dd076001eddd163436642d1ff487c91d4a8 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8b25874278e4d7073085d6a41a95a02301603741 | ORPH sparc64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/c6d9a89e5f550310c672a621ca8e8d63575dda87 | mips | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/1ca8e68b27bc58dca94b7a7af02a306497be7a02 | mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/461b1b46310e2df7e2d153e8116ead4793f68088 | ORPH aarch64 | flannel-0.14.0 | NOK | http://autobuild.buildroot.net/results/f3e40ca88f7c314822e26dce95e3ce8b68a624e5 | riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/0bc09dc6406fa152955ba7f8d62218e758b4d2ad | mips | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/18f707a01908a77d9e4c6edf581e8768be466c19 | riscv32 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/5a61d06fb52ed6225e9d62c6a20e573fc374fb3f | powerpc64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/2ce976eb4ad7bc1ef1c34d66617ef4d99583c48c | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/0405d9b4c423e83c4d053e9650e897b2eaddcf35 | mipsel | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/7dfc85f8bd9cfc9a3617b5b2956c5861e05dc40e | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/4065137cc3c7226ad2b255c661ef15ff4f458396 | sparc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/2cef12f539d923c66eb861dd4d642800efd025be | powerpc64le | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/bef57d887c148841a437e2c07db4bc8f40ea6248 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/dbf46cefcf8cb2d9aed032044b716b0d276a0347 | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/085a0788854305d6c5124012b95ea6eedcb00686 | sh4eb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/28b4ac92ee13fdf2c96f6b3fd093fc72286f83db | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fc0b43dc5da16e0ae9bfd8189fe28e8ed5466f6d | i686 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/84b92eedd79d07e70b4b54248d2e6a775a57c308 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/88b00fa24365eeabdfe4e15e1a705c082aff134d | sh4 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c1beb326b8e26343e6a7949bc3e61faaa4d3a854 | xtensa | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cbcfe1ac85b2a761489c8b2d4cf434a5b6fc96b8 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b9ec03ccdf32f150e68914dfa0ffbbb06b33a795 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/076e25d8e5e8bd902511b1bc0c492fb6c9405696 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8148a7cbcc61d6bbf5d35cd713444222d1c9fe5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/546b8bf086fefc0b195817cadd725769e5237ce7 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2156387319e067925518c0d4155466d03a1be55b | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d23e0fca8c0bb8dcd4c5e6da2b18e8943fa73df | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4be90eb9e22a92f14ecc56cf3cbc084fbe68767d | mips64el | gnu-efi-3.0.15 | NOK | http://autobuild.buildroot.net/results/108130430ba379d0c791a7637b07439859e528a1 | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/111ea2e51b060a816343d663b8bc0ac52f0c4efa | ORPH arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/f3da7d48240b46592c1e833b46b95ca5bd29072b | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/0ff0183f99f3cb0077254611e8fe8c9dcdcc4239 | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/db0c1a961721b08b933e451fbd1e815f2a6ecc79 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9987bb20ef729f1961359fd814c5fe8cfa20e87f | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/82c19e57717fd592fc5b8ac28c5ea54c90142034 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fc3003f4d041d991df62f982012af8e5d6806f8b | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d7071b7bb51f837058e2f270a70ef775fabf3567 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b4868b17c10ac7414b4f19223d1abc08345b4f11 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a9c365182b262a4c304499d8162c17b0e6246d4f | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/48a27896f7a6682fdc973b041b8f455fa0c9122d | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8ce8fb5950b50ca53a3e89baa4423d8131c534a2 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c0b38d2a099b52b90ea074ddf800f63dd6e57e8e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7898672ee5e1e08c783716df8864ad27be47865c | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7e6b02a11fde037a47eaf1483c0bb723bd210afa | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/63d55a79e9fa5887ab2cf21bae9442f669b2b980 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/abbd49f42afb6ff3d7ec8cc4493ec07e6e6a70a8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/77e5da7f47199d04aafb32b16321e1d07c57faae | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1ee0499a2f66b4a7ab32fd06d7bbbe751e57cba0 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bbb3d3c27c4cc8c2df8e12b7674432977be75d00 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ff6a0da387e33ba384fe7b4e8d32cece2c7f64e4 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1468570ca5158d9d52ed6657b351564d448099bb | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6b3a182b3ef26a9926c0b538fdb20431a9282a3a | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0916fa0b6ff6710b1c2831847564bd41c039c9c8 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/920ba99a550cd2a263dddb8247a5c3a045ac3608 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4d9caf8405ecd7b55233a6c49d9b5940b115330 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/84da2747f1eda7c6803eaccdef7ac2b28c32b1db | x86_64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/462b9427a1d2702d5e4a67bb5cc2d4355eaf92dc | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/72f067fd226d70a448f2542358fb27f7a2aad111 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ffc24194cc11985edeff1d9af8c546910c118343 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/150cb36e233739fecfce8c49bae3fe61e2b551e5 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/847205190d689fd10ff4813365ffadc24c2176d7 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d8a7d731607651db06846cee614fc35a8595a5f3 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8ace710890307da277c62185a588a698ab3719d7 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08ab9a4737faedc824fb4b11af4e98c8e109a9ca | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd1272cf5f1a7a43df6ba579c635f40d30548b2d | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/17cf8726e2bd785f133c05a567db42dbff33037e | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/55eadd1d3ff53f0618b623df70645942b1c899ad | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8f6153271027aae6786ef9c1e1314777566e2def | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/110fa547341d074c5b218d25a5de47a1312d00f5 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed36c83e9a3c281c7982078d6ec2b4693d27bf01 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d58719f648a6468ff55a8422e482d1df965abb1f | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/092df43a8a280988e6608b7ac74b33b40f100dac | ORPH sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9cdb0761d3ef3d7d2301a2a0210a599cb2e13cf1 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c3c592fd6439fb099ad34c824c9e206a233cfa4f | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/961e26d839d0ec77ceb123e2c03103ffa34f634b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4b8674d9c8f64dfe89aa64cbc9ae614eaff0e81e | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/00063882e86f5e16d8914750491760c2c8b53c7f | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9d828251e5c7e7136da08be9f498f75b8255cca4 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c3ee5a906e4c9ef2f808386f53565031d359845b | powerpc64le | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/0010268524cf25a4b38dff1cc6154872cd0c8482 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/23d50b241271c8a8fdd9671705064267ab0ca9ed | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d73477b293a6b789b29cd3d1a7b43517b898cda0 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b4ce34cc926f509cce2dbd5b8bd27679f188e93d | sh4eb | libcpprestsdk-2.10.18 | NOK | http://autobuild.buildroot.net/results/c1c262c1387a0088c919280c30767a7c6412fcc0 | ORPH riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/757da8be50d8d6fc29106b5831356d131fff5f4f | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/973d55b9070895d94e76ae4988cc137396c31725 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dfceabb8b52649122759a85bce1031f304315e62 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2c9d1d8b7663ae9e9590646165af4885d3f42f63 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5aae5fa14ba55ac096d9dbf1ae551afee75db2ab | x86_64 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/3381151b3efd2d2498a38d2579b017238bc5b744 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/23d5016df79d770a5414125d31bed20030f53153 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c5fcf97392e30c2ab4ee180e80404ced531bf399 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4b9f5cac4349067523dc973b767e2cc3c9809a2e | ORPH microblaze | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/35468575bf2865dbfdd648694ad62a20ab52d83a | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/90071f7f6ef2705589c62f77cf01ddb4d08b2e88 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/43c7a58b787e947c2ef7393b04401585aff093c4 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/46737758f7644eea3cbd061209f203399bc966fe | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2d2e70b307d1b80288f203fac03c3976032b3987 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/da6273feaeec84112a9c2d4ae0da6278ec92ff6d | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ba33fed7b78aae49fd9124282b4f626f6a830b7d | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ce4f88059132bca1129b2aa0cc0ac0bad37ea67 | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f1e311f60c1ed03397b5d3bfb8d98f50e90c760c | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e882ea33d1e7fcb61c1a15f9de331e4ba26f7a7e | powerpc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0b00c5d2a62038f7d728c6b9fe694241c1b7fd0b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/11f0237bb3f31cd8804cb4a855b1665046671e1f | i686 | libsigc-3.2.0 | NOK | http://autobuild.buildroot.net/results/3342af733950b9e83c8e241b35ba8e575f338a3d | ORPH powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/942532328dfe37ddba1f364230672510e9f7c28f | powerpc64le | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/539d82daae77e097bf914d33c93c899c6ad23515 | ORPH mipsel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/032ecc729f64f74fe656e21523391507fc3834c5 | ORPH microblaze | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/483dd42f320933eb2a5202984d19a522f8c6343a | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/9239a88f12bf9ec240ca6f34c8e5243f87681be1 | ORPH sh4eb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/394c3b5a11cd6315ef5f58c11b88dce49ff296c8 | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b9da14feb9cb59e1f357b4a86d52f1ef51c26131 | ORPH arc | lttng-babeltrace-1.5.7 | NOK | http://autobuild.buildroot.net/results/aa717921f3b93ae9d0880497153546729d0e999c | powerpc | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/b80e41376f9ad40c1e6fc088980097298de633ea | aarch64_be | luvi-2.13.0 | NOK | http://autobuild.buildroot.net/results/4ee8bb7b8d69e1b102fe3ed89cc813585d5ea9c5 | ORPH or1k | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/56bf348b16e2de0c0f905ba506efc8d90e37a6a2 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/805543ae55950de68b734004d6dddc36a6a7660f | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/155f0810c9cd8acbfc76a14976b962c1ed296646 | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/7de26c873b325b4b0b25e70ac7d42f5e9c914b5d | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/50750370b59d3fcde621688babf467d7e73c9900 | ORPH nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/21bd18ce879d8bcc75345b78ce13a29d2185d9c3 | s390x | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/c6e70bd975f56d225a1e7774923395d9c4bca6b1 | aarch64 | ne10-1.2.1 | NOK | http://autobuild.buildroot.net/results/a339b4a3927379b2e30d1e83f481b7cc8c5ce7d5 | mipsel | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/79a507e35e1f4eb0f563772171dfab4ca1c1878c | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/1c61d4b0fd6ebb4a92c30c8e2ea216dbe0353786 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/00a76566a0de7622bd8005d69d6f83d44c3e5301 | ORPH microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/42fd7fa4e1d0e2736f1cb9f1ada3cd33e99a802f | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/7406486c275c8766ed2a2bb0278fd0d290f4c8ff | ORPH mips | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/e8ae47ac732936d4411ff2e669fccbb9ac2b5a1a | i686 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/20a5a3e9149990b1088162b76bbee0e80a915c7b | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/192fef81677d37c9c05232bccd3a9d50baabe365 | aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/439d82e92fe4d5268c3f902a659eddcf0ddd106f | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/363db5621fe14acb4c23a77bcffd6c19f72c98ae | sh4 | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/97910f245c6d59f6b5f53471486b64fccd583292 | armeb | pixz-1.0.7 | NOK | http://autobuild.buildroot.net/results/080174fe65f5e109ba8b331cea972f19ccfe5e05 | xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/d8dc2113bb676791f224cd36852318e31ca1c1f8 | nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/25a1a88b3e6b3000e995778d0a34b0836d3403eb | ORPH powerpc64le | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/8871c6a4acba52961d73abaea5aee1ae6896ed30 | ORPH s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/615f896569fef6171b78a0882f75d63ef0332f3a | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/fa1c2a2f2345129a6cc53096baa259b59a04c57c | ORPH powerpc64 | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/287f2fad8355577f03aea259b62cb0bcaee88219 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3df1e7312f144be1092bbd132d58c01f3183d0a3 | ORPH sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6d03a37f3f73b9174d80a2c545ba72ec07c762e6 | ORPH nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/30005ff176ddbac7280cbe0eadff394151a4f56f | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c0c5be5dc7b108dadbcda38b699837436a01d9e9 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/44c012032a7bb959520c3f23a668997c1a833a89 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/62ed0c2a3349bc14e89b851fe9d2f9f39593c443 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5477bd1d37f0bff7bb35a8d703a49ffea32324ef | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/836bdd1c81b8b2c4b9e317e3eb000f39a45f1bf3 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/268bf7906a29604b131f858ee6100912c0343332 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e5aa762ed3a412e88a20d8cb0bf2ae3c72d7bd5d | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d25a439bdd692844c2862c82055ac0c97e98917c | mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0b57597bebf43d98b3c5ee39a68ee7162c53ad7f | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5246d96fdfc7b83868ee78643b9912d3f695f9be | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4a0967124d2fd98669beb2cf3fc5560cca3a618 | ORPH riscv64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/62c8561d33394c26a0693e93f391625cdcc291f5 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cc62d6d858164f73e1952be8bff8ef5ca2c12d3e | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/630dd0d55369995102052284f934522a96bfb5bb | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a08164170a36a54a046df181f1680769695a42de | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/262f87c077c0cd5183d5e47c876a07cb9d813aaf | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bc8fedcf14afadd5eaccf53e19b0f4220c53ca7e | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/a6996bb8eb6a732fcfcb6480a32766df42c56bd6 | arc | unknown | NOK | http://autobuild.buildroot.net/results/f9abb09630b4357bbace52cade30d10b99fb16e2 | arm | unknown | NOK | http://autobuild.buildroot.net/results/37f63fe3c40357b63222e1e12867434b7f94e4d1 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/42a43ccd387d4c49b97dff58969e28468d128704 | sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/812dbd853e5b6716c2ed5fb7dfa22b0e61e21de4 | mips | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/2d6537663dc9fd86db9db917728da0a0d646a916 | ORPH mipsel | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/35b8f43552d6fed770f1f0b2c54103b65d0edb9b | ORPH i586 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/d8e923c973ad94d43de4d0370ff608e07272d587 | mips | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/3930efffb2686381f372a824f894530112410547 | powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/02353aaa647812041240cbf651a840ca65b4f908 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/9e48dcfd9a3c6d418901afbfb35a08cd5f33aee5 | mipsel | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/655fc4da4aa5538e98e1dc45c58074a7ddc65f5f | arm | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3a0cd1fdcf9b47ee6d66cfa39edc1bd0953e0d71 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c3748f575d7c9c972d95067cb21e2c931760a3a8 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/50c5f4582252ea2c40142fb14c7288f58680e807 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2c6ad6acbf9382d7df8a8114f4d067cb12670d7e | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 qt5webkit-5.212.0-alpha4 | 1 vlc-3.0.16 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d2a0585030277a51bee5cda39b5cee01b3323a49 | mipsel | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/49c9f8e4d234ebb615f796e1ce50a76b82be399a | x86_64 | vlc-3.0.16 | NOK | http://autobuild.buildroot.net/results/3838dc3444188c44904528992a4b41ee8e2ace88 | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-spirv-llvm-translator-... | 3 openssh-legal-info | 2 unknown | 2 acpica-20200717 | 1 gnu-efi-3.0.14 | 1 host-rust-1.62.0 | 1 igd2-for-linux-2.1 | 1 igh-ethercat-1.5.2 | 1 libgcrypt-1.10.1 | 1 mongodb-4.2.18 | 1 perl-5.34.1 | 1 systemd-250.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpica-20200717 | NOK | http://autobuild.buildroot.net/results/92cb8ec6fbd9e485f88dfaefda531712310189a8 | mips64el | gnu-efi-3.0.14 | NOK | http://autobuild.buildroot.net/results/ecdb5299588ae1de2d6a184e6b7b6d3df9249db7 | i686 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/e5d45c8a2192e380805e8f64852bcf6a08bc6a99 | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fe5e15282913d1898ed7795d2ac6c2b868b11852 | ORPH x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/f4c01905adcc3c40b9c3fefa1b570246b251e94c | ORPH i686 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/b8633932159364822904ec10a189127e6f98a7e4 | ORPH aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/245b3bcd99d09f7b1eb0d60520922345220b73af | riscv32 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/0f73a76df0aa6e39786527b7f854fd434f918b8b | i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/e459a4745d2128142f42e20817e388a01f941e67 | ORPH aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/3dfc010b35a0e0d06a18af1b1d4354c1d5fb0c0d | or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/ea03740ba6f639b64c71ae5899342f92afb34b39 | ORPH sparc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/651ba52c5bc7ea5380147113de6e5c4e9407c911 | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ebf0e0fd9d7712e47515ee676d109b9bfd98aeb6 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/34235256236802d76b827baf26b679b07f3a4a25 | powerpc | unknown | NOK | http://autobuild.buildroot.net/results/cd91107c69194a5219abf0168d4a8d535877b08a | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/ca6dca94384cb2299fb12035b2a44b2ffcd7a62a | -- http://autobuild.buildroot.net From yairba at protonmail.com Sun Oct 23 07:04:28 2022 From: yairba at protonmail.com (Yair Ben-Avraham) Date: Sun, 23 Oct 2022 07:04:28 +0000 Subject: [Buildroot] [PATCH 1/1] package/casync: bump to latest git commit (0efa7abffe5f) Message-ID: Drop patches (merged to main) Signed-off-by: Yair Ben-Avraham --- ...castore-fix-build-without-lzma-or-xz.patch | 35 ------------ ...tall-udev-rules-without-udev-support.patch | 53 ------------------- package/casync/casync.hash | 2 +- package/casync/casync.mk | 2 +- 4 files changed, 2 insertions(+), 90 deletions(-) delete mode 100644 package/casync/0001-castore-fix-build-without-lzma-or-xz.patch delete mode 100644 package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch diff --git a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch b/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch deleted file mode 100644 index a528b1244c..0000000000 --- a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 06b667de02df34e3efa1864b4031853bd4ee010d Mon Sep 17 00:00:00 2001 -From: Yair Ben-Avraham -Date: Sun, 10 Jan 2021 06:34:58 +0100 -Subject: [PATCH] castore: fix build without lzma or xz - -castore.c unconditioanlly includes lzma.h, but lzma support if optional. -Furthermore, castore.c does not need anything from lzma.h. - -Drop the include altogether. - -Signed-off-by: Yair Ben-Avraham -[yann.morin.1998 at free.fr: - - lzma.h is not needed at all - - rewrite commit log accordingly -] -Signed-off-by: Yann E. MORIN ---- - src/castore.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/src/castore.c b/src/castore.c -index c290dfd..b2e5320 100644 ---- a/src/castore.c -+++ b/src/castore.c -@@ -2,7 +2,6 @@ - - #include - #include --#include - #include - #include - --- -2.25.1 - diff --git a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch b/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch deleted file mode 100644 index 838b065571..0000000000 --- a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e3f683dc3013d14bddb9f9ec5bdc31367dc51a1c Mon Sep 17 00:00:00 2001 -From: "Yann E. MORIN" -Date: Sun, 10 Jan 2021 10:44:39 +0100 -Subject: [PATCH] build: don't install udev rules without udev support - -Signed-off-by: Yann E. MORIN ---- - meson.build | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -diff --git a/meson.build b/meson.build -index aac7727..92be1ea 100644 ---- a/meson.build -+++ b/meson.build -@@ -151,6 +151,11 @@ conf.set10('HAVE_SELINUX', get_option('selinux')) - - if get_option('udev') - libudev = dependency('libudev') -+ udevrulesdir = get_option('udevrulesdir') -+ if udevrulesdir == '' -+ udev = dependency('udev', required : false) -+ udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') -+ endif - else - libudev = [] - endif -@@ -175,12 +180,6 @@ subdir('test') - - includes = include_directories('src') - --udevrulesdir = get_option('udevrulesdir') --if udevrulesdir == '' -- udev = dependency('udev', required : false) -- udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') --endif -- - subdir('shell-completion/bash') - subdir('doc') - -@@ -318,7 +317,9 @@ udev_rule = configure_file( - input : 'src/75-casync.rules.in', - configuration : substs) - --install_data(udev_rule, install_dir : udevrulesdir) -+if get_option('udev') -+ install_data(udev_rule, install_dir : udevrulesdir) -+endif - - ############################################################ - --- -2.25.1 - diff --git a/package/casync/casync.hash b/package/casync/casync.hash index dbb85520de..469beb5b6c 100644 --- a/package/casync/casync.hash +++ b/package/casync/casync.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 d07f43e70e3c466152033da4c55c065f815d3025234a046c2bce1cfe4ac7d273 casync-4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc.tar.gz +sha256 5d58def4c5ca902b35a97178d4619b9298a35b27d5748a2cc346bd36c2e38e9c casync-0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/casync/casync.mk b/package/casync/casync.mk index bb9bd8ccac..af010a7ece 100644 --- a/package/casync/casync.mk +++ b/package/casync/casync.mk @@ -4,7 +4,7 @@ # ################################################################################ -CASYNC_VERSION = 4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc +CASYNC_VERSION = 0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f CASYNC_SITE = $(call github,systemd,casync,$(CASYNC_VERSION)) CASYNC_LICENSE = LGPL-2.1+ CASYNC_LICENSE_FILES = LICENSE.LGPL2.1 -- 2.30.2 From fperrad at gmail.com Sun Oct 23 07:19:46 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 09:19:46 +0200 Subject: [Buildroot] [PATCH] package/lua-lyaml: bump to version 6.2.8 Message-ID: <20221023071946.433502-1-francois.perrad@gadz.org> diff LICENCE: -Copyright (C) 2013-2020 Gary V. Vaughan +Copyright (C) 2013-2022 Gary V. Vaughan Signed-off-by: Francois Perrad --- package/lua-lyaml/lua-lyaml.hash | 4 ++-- package/lua-lyaml/lua-lyaml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lua-lyaml/lua-lyaml.hash b/package/lua-lyaml/lua-lyaml.hash index af3d0ae6d..a8599bc3d 100644 --- a/package/lua-lyaml/lua-lyaml.hash +++ b/package/lua-lyaml/lua-lyaml.hash @@ -1,3 +1,3 @@ # locally computed -sha256 9bb489cefae48b150d66f6bab4141d8d5831fcb7465bfc52a9845fa01efc63b0 lua-lyaml-6.2.7.tar.gz -sha256 81e4ea1d897e259b31111adc2d3c185fe23e435942ff3e9de8c8c9c5d01247d0 LICENSE +sha256 c6169f516ff2a8da96d55aa3a087e718edf7bceb2f1cae2def4e65cd2b41ac2d lua-lyaml-6.2.8.tar.gz +sha256 796d267e51d61652c55694d21108e7352e98b1ed489ab7516acc07102157e08d LICENSE diff --git a/package/lua-lyaml/lua-lyaml.mk b/package/lua-lyaml/lua-lyaml.mk index 77980f531..00a868ec2 100644 --- a/package/lua-lyaml/lua-lyaml.mk +++ b/package/lua-lyaml/lua-lyaml.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUA_LYAML_VERSION = 6.2.7 +LUA_LYAML_VERSION = 6.2.8 LUA_LYAML_NAME_UPSTREAM = lyaml LUA_LYAML_SITE = $(call github,gvvaughan,$(LUA_LYAML_NAME_UPSTREAM),v$(LUA_LYAML_VERSION)) LUA_LYAML_LICENSE = MIT -- 2.37.2 From t_fahmy_bassem at hotmail.com Sun Oct 23 08:04:01 2022 From: t_fahmy_bassem at hotmail.com (Bassem Fahmy) Date: Sun, 23 Oct 2022 08:04:01 +0000 Subject: [Buildroot] defconfig fragments Message-ID: Hello, I understand that buildroot supports config fragments for packages (that support defconfig). But to patch the buildroot defconfig itself, the only way I could do it, is by calling > support/kconfig/merge_config.h xxxx_defconfig xxxx.config Is this the correct way? Is there a more standard way to patch a buildroot defconfig? Regards, Bassem? From ps.report at gmx.net Sun Oct 23 08:37:03 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Sun, 23 Oct 2022 10:37:03 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022214439.174830-1-fontaine.fabrice@gmail.com> References: <20221022214439.174830-1-fontaine.fabrice@gmail.com> Message-ID: <20221023103703.0f0335bc@gmx.net> Hello Fabrice, On Sat, 22 Oct 2022 23:44:39 +0200, Fabrice Fontaine wrote: > usbredirserver was dropped by > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 > > Add an option to enable tools (and usbredirect binary) as a replacement > to usbredirserver > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2 (after review of Peter Seiderer): > - Add an option to enable tools > > Config.in.legacy | 9 +++++++++ > package/usbredir/Config.in | 11 ++++++----- > package/usbredir/usbredir.hash | 4 ++-- > package/usbredir/usbredir.mk | 21 +++++++-------------- > 4 files changed, 24 insertions(+), 21 deletions(-) > > diff --git a/Config.in.legacy b/Config.in.legacy > index 0e63d59a98..efe35fde36 100644 > --- a/Config.in.legacy > +++ b/Config.in.legacy > @@ -146,6 +146,15 @@ endif > > comment "Legacy options removed in 2022.11" > > +config BR2_PACKAGE_USBREDIR_SERVER > + bool "usbredirserver removed" > + select BR2_LEGACY > + select BR2_PACKAGE_USBREDIR_TOOLS > + help > + usbredirserver has been dropped by upstream since version > + 0.13.0. usbredir tools (which include usbredirect binary) has > + been selected instead. > + > config BR2_KERNEL_HEADERS_5_17 > bool "kernel headers version 5.17.x are no longer supported" > select BR2_LEGACY > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > index 8ce180a884..d546ac1025 100644 > --- a/package/usbredir/Config.in > +++ b/package/usbredir/Config.in > @@ -15,18 +15,19 @@ config BR2_PACKAGE_USBREDIR > protocol. > > Note: only the library is installed, not the utilities. Say > - 'y' below if you want the server too. > + 'y' below if you want the tools too. > > http://www.spice-space.org/page/UsbRedir > > if BR2_PACKAGE_USBREDIR > > -config BR2_PACKAGE_USBREDIR_SERVER > - bool "usbredirserver on target" > +config BR2_PACKAGE_USBREDIR_TOOLS > + bool "Enable tools" > help > If you want to serve usbredir requests on your target, say > - 'y' here to have the usbredir server on the target. > + 'y' here to have the tools built and installed on the target > + (including usbredirect binary). > > - Note: the server is not required to use the library. > + Note: the tools are not required to use the library. > > endif > diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash > index f738c36690..577e08efba 100644 > --- a/package/usbredir/usbredir.hash > +++ b/package/usbredir/usbredir.hash > @@ -1,5 +1,5 @@ > -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz > +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz > > # Hash for license files > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > index 6792a3e758..172f0d52a0 100644 > --- a/package/usbredir/usbredir.mk > +++ b/package/usbredir/usbredir.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -USBREDIR_VERSION = 0.12.0 > +USBREDIR_VERSION = 0.13.0 > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > USBREDIR_SITE = http://spice-space.org/download/usbredir > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > @@ -14,21 +14,14 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb > USBREDIR_CONF_OPTS = \ > -Dgit_werror=disabled \ > -Dstack_protector=disabled \ > - -Dtests=disabled \ > - -Dtools=disabled > - > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > + -Dtests=disabled > > +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) > USBREDIR_LICENSE += , GPL-2.0+ (program) > USBREDIR_LICENSE_FILES += COPYING > - > -else # BR2_PACKAGE_USBREDIR_SERVER != y > - > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > -endef > -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - > -endif # BR2_PACKAGE_USBREDIR_SERVER > +USBREDIR_CONF_OPTS += -Dtools=enabled Build failed with: Found pkg-config: .../host/bin/pkgconf (1.6.3) Run-time dependency libusb-1.0 found: YES 1.0.26 Found CMake: /usr/bin/cmake (3.24.2) Run-time dependency glib-2.0 found: NO (tried pkgconfig and cmake) .../build/usbredir-0.13.0/tools/meson.build:17:4: ERROR: Dependency "glib-2.0" not found, tried pkgconfig and cmake Regards, Peter > +else > +USBREDIR_CONF_OPTS += -Dtools=disabled > +endif > > $(eval $(meson-package)) From fontaine.fabrice at gmail.com Sun Oct 23 08:52:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 10:52:51 +0200 Subject: [Buildroot] [PATCH v3, 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221023085251.8723-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Add an option to enable tools (and usbredirect binary) as a replacement to usbredirserver https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Changes v2 -> v3 (after review of Peter Seiderer): - Add libglib2 dependency Changes v1 -> v2 (after review of Peter Seiderer): - Add an option to enable tools Config.in.legacy | 8 ++++++++ package/usbredir/Config.in | 18 +++++++++++++----- package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 22 ++++++++-------------- 4 files changed, 31 insertions(+), 21 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..17f0858e70 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,14 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + help + usbredirserver has been dropped by upstream since version + 0.13.0. usbredir tools (which include usbredirect binary) can + be used as a replacement. + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..3e2e32568d 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -15,18 +15,26 @@ config BR2_PACKAGE_USBREDIR protocol. Note: only the library is installed, not the utilities. Say - 'y' below if you want the server too. + 'y' below if you want the tools too. http://www.spice-space.org/page/UsbRedir if BR2_PACKAGE_USBREDIR -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" +config BR2_PACKAGE_USBREDIR_TOOLS + bool "Enable tools" + depends on BR2_USE_MMU # libglib2 + depends on BR2_USE_WCHAR # libglib2 + select BR2_PACKAGE_LIBGLIB2 help If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. + 'y' here to have the tools built and installed on the target + (including usbredirect binary). - Note: the server is not required to use the library. + Note: the tools are not required to use the library. + +comment "tools needs a toolchain w/ wchar" + depends on BR2_USE_MMU + depends on !BR2_USE_WCHAR endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..325e7313aa 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -14,21 +14,15 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb USBREDIR_CONF_OPTS = \ -Dgit_werror=disabled \ -Dstack_protector=disabled \ - -Dtests=disabled \ - -Dtools=disabled - -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) + -Dtests=disabled +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) USBREDIR_LICENSE += , GPL-2.0+ (program) USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER +USBREDIR_DEPENDENCIES += libglib2 +USBREDIR_CONF_OPTS += -Dtools=enabled +else +USBREDIR_CONF_OPTS += -Dtools=disabled +endif $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 09:10:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 11:10:08 +0200 Subject: [Buildroot] [PATCH 1/2] package/lz4: fix LZ4_CPE_ID_VENDOR Message-ID: <20221023091009.18544-1-fontaine.fabrice@gmail.com> cpe:2.3:a:yann_collet:lz4, which was added by commit 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 While at it, also drop the note added by commit 45db4bb08e3e550db483d8745fe8aaede2fa7e98 Signed-off-by: Fabrice Fontaine --- package/lz4/lz4.mk | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 9b9b6198c3..541a03473a 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -9,13 +9,7 @@ LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING -LZ4_CPE_ID_VENDOR = yann_collet - -# CVE-2014-4715 is misclassified (by our CVE tracker) as affecting version -# 1.9.2, while in fact this issue has been fixed since lz4-r130: -# https://github.com/lz4/lz4/commit/140e6e72ddb6fc5f7cd28ce0c8ec3812ef4a9c08 -# See https://github.com/lz4/lz4/issues/818 -LZ4_IGNORE_CVES += CVE-2014-4715 +LZ4_CPE_ID_VENDOR = lz4_project # 0001-Fix-potential-memory-corruption-with-negative-memmov.patch LZ4_IGNORE_CVES += CVE-2021-3520 -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 09:10:09 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 11:10:09 +0200 Subject: [Buildroot] [PATCH 2/2] package/lz4: bump to version 1.9.4 In-Reply-To: <20221023091009.18544-1-fontaine.fabrice@gmail.com> References: <20221023091009.18544-1-fontaine.fabrice@gmail.com> Message-ID: <20221023091009.18544-2-fontaine.fabrice@gmail.com> LZ4 v1.9.4 is a maintenance release, featuring a substantial amount (~350 commits) of minor fixes and improvements, making it a recommended upgrade. The stable portion of liblz4 API is unmodified, making this release a drop-in replacement for existing features. - Drop patch (already in version) - Update hash of lib/LICENSE (update in year with https://github.com/lz4/lz4/commit/87a80acbe7872b9da7d56f7005ffd1b715e87c93) https://github.com/lz4/lz4/releases/tag/v1.9.4 Signed-off-by: Fabrice Fontaine --- ...mory-corruption-with-negative-memmov.patch | 26 ------------------- package/lz4/lz4.hash | 4 +-- package/lz4/lz4.mk | 5 +--- 3 files changed, 3 insertions(+), 32 deletions(-) delete mode 100644 package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch diff --git a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch b/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch deleted file mode 100644 index 57e4e38f84..0000000000 --- a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8301a21773ef61656225e264f4f06ae14462bca7 Mon Sep 17 00:00:00 2001 -From: Jasper Lievisse Adriaanse -Date: Fri, 26 Feb 2021 15:21:20 +0100 -Subject: [PATCH] Fix potential memory corruption with negative memmove() size - -Signed-off-by: Peter Korsgaard ---- - lib/lz4.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/lib/lz4.c b/lib/lz4.c -index 5f524d0..c2f504e 100644 ---- a/lib/lz4.c -+++ b/lib/lz4.c -@@ -1749,7 +1749,7 @@ LZ4_decompress_generic( - const size_t dictSize /* note : = 0 if noDict */ - ) - { -- if (src == NULL) { return -1; } -+ if ((src == NULL) || (outputSize < 0)) { return -1; } - - { const BYTE* ip = (const BYTE*) src; - const BYTE* const iend = ip + srcSize; --- -2.20.1 - diff --git a/package/lz4/lz4.hash b/package/lz4/lz4.hash index 0b03089ecd..04bd118cfe 100644 --- a/package/lz4/lz4.hash +++ b/package/lz4/lz4.hash @@ -1,4 +1,4 @@ # sha256 locally computed -sha256 030644df4611007ff7dc962d981f390361e6c97a34e5cbc393ddfbe019ffe2c1 lz4-1.9.3.tar.gz -sha256 d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71 lib/LICENSE +sha256 0b0e3aa07c8c063ddf40b082bdf7e37a1562bda40a0ff5272957f3e987e0e54b lz4-1.9.4.tar.gz +sha256 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c lib/LICENSE sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 programs/COPYING diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 541a03473a..5da1ae2703 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -4,16 +4,13 @@ # ################################################################################ -LZ4_VERSION = 1.9.3 +LZ4_VERSION = 1.9.4 LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING LZ4_CPE_ID_VENDOR = lz4_project -# 0001-Fix-potential-memory-corruption-with-negative-memmov.patch -LZ4_IGNORE_CVES += CVE-2021-3520 - ifeq ($(BR2_STATIC_LIBS),y) LZ4_MAKE_OPTS += BUILD_SHARED=no else ifeq ($(BR2_SHARED_LIBS),y) -- 2.35.1 From fperrad at gmail.com Sun Oct 23 11:48:41 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 13:48:41 +0200 Subject: [Buildroot] [PATCH] package/janet: bump to version 1.25.0 Message-ID: <20221023114841.505480-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/janet/janet.hash | 2 +- package/janet/janet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/janet/janet.hash b/package/janet/janet.hash index 473955e39..5cd3db1c2 100644 --- a/package/janet/janet.hash +++ b/package/janet/janet.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0b4d5d3632e0d376d9512ea8ea262f31f75c132b488dd7870f472acae709a865 janet-1.23.0.tar.gz +sha256 5bf9b680adbc5511835aec3787117df37032eef796e1664edbbcfd540b6acaf3 janet-1.25.0.tar.gz # Locally calculated sha256 e2d2ae8360d95386af751ac7d1a3da36ea8ceb230e5f0eba7eb762547b1c58c9 LICENSE diff --git a/package/janet/janet.mk b/package/janet/janet.mk index 070eae1cf..284e6c264 100644 --- a/package/janet/janet.mk +++ b/package/janet/janet.mk @@ -4,7 +4,7 @@ # ################################################################################ -JANET_VERSION = 1.23.0 +JANET_VERSION = 1.25.0 JANET_SITE = $(call github,janet-lang,janet,v$(JANET_VERSION)) JANET_LICENSE = MIT JANET_LICENSE_FILES = LICENSE -- 2.37.2 From fperrad at gmail.com Sun Oct 23 11:49:08 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 13:49:08 +0200 Subject: [Buildroot] [PATCH] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 Message-ID: <20221023114908.505511-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/luajit/0001-no-bin-symlink.patch | 4 ++-- package/luajit/0002-install-inc.patch | 6 +++--- package/luajit/luajit.hash | 2 +- package/luajit/luajit.mk | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/package/luajit/0001-no-bin-symlink.patch b/package/luajit/0001-no-bin-symlink.patch index d32ec5ad6..dc36fa58d 100644 --- a/package/luajit/0001-no-bin-symlink.patch +++ b/package/luajit/0001-no-bin-symlink.patch @@ -6,7 +6,7 @@ Index: b/Makefile =================================================================== --- a/Makefile +++ b/Makefile -@@ -44,8 +44,7 @@ +@@ -45,8 +45,7 @@ INSTALL_MAN= $(INSTALL_SHARE)/man/man1 INSTALL_PKGCONFIG= $(INSTALL_LIB)/pkgconfig @@ -16,7 +16,7 @@ Index: b/Makefile INSTALL_ANAME= libluajit-$(ABIVER).a INSTALL_SOSHORT1= libluajit-$(ABIVER).so INSTALL_SOSHORT2= libluajit-$(ABIVER).so.$(MAJVER) -@@ -60,7 +59,6 @@ +@@ -61,7 +60,6 @@ INSTALL_SHORT1= $(INSTALL_LIB)/$(INSTALL_SOSHORT1) INSTALL_SHORT2= $(INSTALL_LIB)/$(INSTALL_SOSHORT2) INSTALL_T= $(INSTALL_BIN)/$(INSTALL_TNAME) diff --git a/package/luajit/0002-install-inc.patch b/package/luajit/0002-install-inc.patch index 5f6547fc3..8de777dce 100644 --- a/package/luajit/0002-install-inc.patch +++ b/package/luajit/0002-install-inc.patch @@ -10,8 +10,8 @@ Index: b/Makefile INSTALL_BIN= $(DPREFIX)/bin INSTALL_LIB= $(DPREFIX)/$(MULTILIB) INSTALL_SHARE= $(DPREFIX)/share --INSTALL_INC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) -+INSTALL_INC= $(DPREFIX)/include +-INSTALL_DEFINC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) ++INSTALL_DEFINC= $(DPREFIX)/include + INSTALL_INC= $(INSTALL_DEFINC) INSTALL_LJLIBD= $(INSTALL_SHARE)/luajit-$(VERSION) - INSTALL_JITLIB= $(INSTALL_LJLIBD)/jit diff --git a/package/luajit/luajit.hash b/package/luajit/luajit.hash index 648d6eb18..d00cea4ee 100644 --- a/package/luajit/luajit.hash +++ b/package/luajit/luajit.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 e0389c7669f8e455383d8f0c9d9354d44cdd1885bbf8fd0d4bcdb8fc6f794063 luajit-5677985dc1f19cf0a67112f4365c7fb79237fa16.tar.gz +sha256 19a911fdd77af69e48fa50749606a9009696f543cc88e898b4480d8d3c8828f5 luajit-6c4826f12c4d33b8b978004bc681eb1eef2be977.tar.gz # Locally calculated sha256 52fc5b15ac968ed81aabb4c1e23ab3bce50f57a5764e9cdca86b463a11072921 COPYRIGHT diff --git a/package/luajit/luajit.mk b/package/luajit/luajit.mk index 2c1e3216e..c79f18bf6 100644 --- a/package/luajit/luajit.mk +++ b/package/luajit/luajit.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUAJIT_VERSION = 5677985dc1f19cf0a67112f4365c7fb79237fa16 +LUAJIT_VERSION = 6c4826f12c4d33b8b978004bc681eb1eef2be977 LUAJIT_SITE = $(call github,LuaJIT,LuaJIT,$(LUAJIT_VERSION)) LUAJIT_LICENSE = MIT LUAJIT_LICENSE_FILES = COPYRIGHT -- 2.37.2 From fontaine.fabrice at gmail.com Sun Oct 23 14:17:06 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 16:17:06 +0200 Subject: [Buildroot] [PATCH 1/1] package/lirc-tools: bump to version 0.10.2 Message-ID: <20221023141706.197964-1-fontaine.fabrice@gmail.com> - Drop first to third patches (already in version) - Add a patch to disable documentation and avoid a build failure without doxygen https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS Signed-off-by: Fabrice Fontaine --- .../0001-Fix-build-without-Python.patch | 63 ------------------- ...evinput.c-fix-build-with-musl-1.2.0.patch} | 0 ...0002-Fix-python-client-cross-compile.patch | 47 -------------- ...002-configure-add-disable-doc-option.patch | 52 +++++++++++++++ ...irc-version-detection-when-cross-com.patch | 51 --------------- package/lirc-tools/lirc-tools.hash | 8 +-- package/lirc-tools/lirc-tools.mk | 2 +- 7 files changed, 57 insertions(+), 166 deletions(-) delete mode 100644 package/lirc-tools/0001-Fix-build-without-Python.patch rename package/lirc-tools/{0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch => 0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch} (100%) delete mode 100644 package/lirc-tools/0002-Fix-python-client-cross-compile.patch create mode 100644 package/lirc-tools/0002-configure-add-disable-doc-option.patch delete mode 100644 package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch diff --git a/package/lirc-tools/0001-Fix-build-without-Python.patch b/package/lirc-tools/0001-Fix-build-without-Python.patch deleted file mode 100644 index b1940eac0d..0000000000 --- a/package/lirc-tools/0001-Fix-build-without-Python.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 71f329d997d949d3c12d62d2f1473a1c99ee49b0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Sun, 27 Aug 2017 21:30:37 +0300 -Subject: [PATCH] Fix build without Python - -Don't define HAVE_PYTHON35 when PYTHON_LIBS is empty. - -Also, don't build Python dependent code when HAVE_PYTHON35 is not -defined. - -This fixes build failures like: - -Makefile:1616: recipe for target 'python-pkg/dist/lirc-0.10.0.tar.gz' failed -make[3]: *** [python-pkg/dist/lirc-0.10.0.tar.gz] Error 1 -python-pkg/lirc/_client.c:1:20: fatal error: Python.h: No such file or directory - #include - ^ - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 74a2bcab6b - - Makefile.am | 2 ++ - configure.ac | 3 ++- - 2 files changed, 4 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index 9f3dd14340cc..d8164fcd44cf 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -104,6 +104,7 @@ dist_py_pkg_doc_DATA = python-pkg/doc/Doxyfile \ - - libpython = $(libdir)/python$(PYTHON_VERSION) - pydir = $(libpython)/site-packages/lirc -+if HAVE_PYTHON35 - py_LTLIBRARIES = python-pkg/lib/_client.la - python_pkg_lib__client_la_SOURCES = \ - python-pkg/lirc/_client.c -@@ -116,6 +117,7 @@ python_pkg_lib__client_la_LDFLAGS = \ - $(PYTHON_LIBS) - python_pkg_lib__client_la_LIBADD = \ - lib/liblirc_client.la -+endif - - pylint: .phony - $(MAKE) -C tools pylint -diff --git a/configure.ac b/configure.ac -index 4108688433f8..07d901deafdf 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -50,7 +50,8 @@ test -z "$PYTHON_LIBS" && \ - test -n "$PYTHON_LIBS" || \ - AC_MSG_WARN([No python package found (missing devel package?)]) - python_version_nodots=$(echo $PYTHON_VERSION | tr -d '.') --AM_CONDITIONAL(HAVE_PYTHON35, [test $python_version_nodots -ge 35]) -+AM_CONDITIONAL(HAVE_PYTHON35, [test -n "$PYTHON_LIBS" && \ -+ test $python_version_nodots -ge 35]) - CFLAGS="$CFLAGS $PYTHON_CFLAGS" - - --- -2.14.1 - diff --git a/package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch b/package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch similarity index 100% rename from package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch rename to package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch diff --git a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch b/package/lirc-tools/0002-Fix-python-client-cross-compile.patch deleted file mode 100644 index 02deefaf98..0000000000 --- a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 13c4ffcfde07f659a836fba4a604dc1c5024bb90 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 29 Aug 2017 11:37:36 +0300 -Subject: [PATCH] Fix python client cross compile - -The setup.py setuptools wrapper needs to use a version of python built -specifically for cross compiling to cross compile successfully. Allow -setting that in the environment using the SETUPTOOLS_ENV variable. - -Fixes the following build failure: - -/usr/bin/ld: skipping incompatible .../lirc-tools-0.10.0/lib/.libs/liblirc_client.so when searching for -llirc_client -/usr/bin/ld: cannot find -llirc_client -collect2: error: ld returned 1 exit status -error: command '/usr/bin/gcc' failed with exit status 1 -Makefile:1578: recipe for target 'all-local' failed - -Signed-off-by: Baruch Siach ---- -Upstream status: https://sourceforge.net/p/lirc/tickets/308/ - - Makefile.am | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index d8164fcd44cf..a16be4278ae2 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -131,6 +131,7 @@ pep8: $(py_PYTHON) - if HAVE_PYTHON35 - all-local: - cd python-pkg; \ -+ $(SETUPTOOLS_ENV) \ - CFLAGS="-I$(abs_top_srcdir)/lib -I$(abs_builddir)/lib" \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py \ - $(if $(VERBOSE),,-q) build -@@ -179,6 +180,7 @@ $(abs_builddir)/python-pkg/setup.py: - $(PYTHON_TARBALL): $(abs_builddir)/python-pkg/setup.py - cp $(top_builddir)/VERSION $(abs_builddir)/python-pkg - cd $(abs_builddir)/python-pkg; CFLAGS=-I$(abs_top_srcdir)/lib \ -+ $(SETUPTOOLS_ENV) \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py -q sdist - - $(top_builddir)/python-pkg/VERSION: VERSION --- -2.14.1 - diff --git a/package/lirc-tools/0002-configure-add-disable-doc-option.patch b/package/lirc-tools/0002-configure-add-disable-doc-option.patch new file mode 100644 index 0000000000..fab485ffef --- /dev/null +++ b/package/lirc-tools/0002-configure-add-disable-doc-option.patch @@ -0,0 +1,52 @@ +From e9d5cbc01e3c0d6a31e2dba2f224b7f3dd21db37 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Sun, 23 Oct 2022 16:10:50 +0200 +Subject: [PATCH] configure: add --disable-doc option + +Allow the user to disable documentation through --disable-doc + +Signed-off-by: Fabrice Fontaine +--- + Makefile.am | 6 +++++- + configure.ac | 8 ++++++++ + 2 files changed, 13 insertions(+), 1 deletion(-) + +diff --git a/Makefile.am b/Makefile.am +index 6718af13..58a321d8 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -45,7 +45,11 @@ if WITH_SYSTEMDSYSTEMUNITDIR + SYSTEMD_DIR = systemd + endif + +-SUBDIRS = lib daemons tools plugins configs doc $(SYSTEMD_DIR) ++if HAVE_DOC ++ DOC_DIR = doc ++endif ++ ++SUBDIRS = lib daemons tools plugins configs $(DOC_DIR) $(SYSTEMD_DIR) + + if INSTALL_ETC + +diff --git a/configure.ac b/configure.ac +index d28c6732..f3384c95 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -486,6 +486,14 @@ AC_ARG_VAR(SETUPTOOLS_ENV, + ) + + ++AC_ARG_ENABLE(doc, ++ [ --enable-doc Build and install documentation (default=yes)], ++ [ enable_doc="${enableval}" ], ++ [ enable_doc=yes] ++) ++AM_CONDITIONAL([HAVE_DOC], [test x$enable_doc = xyes]) ++ ++ + suffix=$(echo "$VERSION" | sed 's/.*-//') + AM_CONDITIONAL(DEVEL, [test x$suffix = xdevel]) + +-- +2.35.1 + diff --git a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch b/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch deleted file mode 100644 index 04fbfe6ea2..0000000000 --- a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 732fd31610a6790a927ea9ed6d660796a1641254 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 7 Sep 2017 08:12:01 +0200 -Subject: [PATCH] build: Fix lirc version detection when cross compiling. - -The setup.py script that runs on the host can't use the client library -built for target. So setup.py falls back to a wrong hard-coded VERSION -value. - -Instead of importing the target library, use exec() to read -lirc/config.py directly for its VERSION value. - -Fixes build failure: - -/usr/bin/install -c -m 644 ./python-pkg/dist/lirc-0.10.0.tar.gz \ - '.../output/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/lirc' -/usr/bin/install: cannot stat './python-pkg/dist/lirc-0.10.0.tar.gz': \ - No such file or directory - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 732fd31610a6 - - python-pkg/setup.py | 9 +++------ - 1 file changed, 3 insertions(+), 6 deletions(-) - -diff --git a/python-pkg/setup.py b/python-pkg/setup.py -index e9b33690f828..a2d92e0432aa 100644 ---- a/python-pkg/setup.py -+++ b/python-pkg/setup.py -@@ -6,14 +6,11 @@ import subprocess - import os.path - import os - --try: -- import lirc.config -- VERSION = lirc.config.VERSION.replace('-devel','') --except ImportError: -- VERSION='0.0.0' -- - from setuptools import setup, Extension - -+exec(open("lirc/config.py").read()) -+VERSION = VERSION.replace('-devel','') -+ - if 'CFLAGS' in os.environ: - cflags = os.environ['CFLAGS'].split() - if 'LDFLAGS' in os.environ: --- -2.14.1 - diff --git a/package/lirc-tools/lirc-tools.hash b/package/lirc-tools/lirc-tools.hash index 187768db47..4808508cca 100644 --- a/package/lirc-tools/lirc-tools.hash +++ b/package/lirc-tools/lirc-tools.hash @@ -1,6 +1,6 @@ -# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.1/ -sha1 9d6f6d18ac566a96ef4ca1d6909a4e8bc517d48a lirc-0.10.1.tar.bz2 -md5 86c3f8e4efaba10571addb8313d1e040 lirc-0.10.1.tar.bz2 +# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.2/ +sha1 02092890205891b6de5a699294485a1eedba46c5 lirc-0.10.2.tar.bz2 +md5 cb96cfb0af8067c0062e2f5a100f426a lirc-0.10.2.tar.bz2 # Locally computed -sha256 8b753c60df2a7f5dcda2db72c38e448ca300c3b4f6000c1501fcb0bd5df414f2 lirc-0.10.1.tar.bz2 +sha256 3d44ec8274881cf262f160805641f0827ffcc20ade0d85e7e6f3b90e0d3d222a lirc-0.10.2.tar.bz2 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lirc-tools/lirc-tools.mk b/package/lirc-tools/lirc-tools.mk index 05f20f5726..5263330741 100644 --- a/package/lirc-tools/lirc-tools.mk +++ b/package/lirc-tools/lirc-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIRC_TOOLS_VERSION = 0.10.1 +LIRC_TOOLS_VERSION = 0.10.2 LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION) LIRC_TOOLS_LICENSE = GPL-2.0+ -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 23 16:44:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 23 Oct 2022 18:44:44 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221023164444.GA1058960@scaer> Oguz, All, On 2022-10-21 11:15 +0200, Oguz Ozhan spake thusly: > From: Oguz Ozhan > > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. This clearly states "for new projects", but we are not new! ;-) Why do we need to switch to pytest, and what does that bring us? (see below too) > - pytest is more robust and has more ability compared to nose2 You provide robustness and more abilities to advocate for switching to pytest, however, you do not explain what is currently broken that would be fixed by the pytest robustness, or what new features from pytest we could leverage, and how. Note that I am not opposed to switching, but we need a good rationale for switching. This commit should also come after we actually did the switch, i.e. we should first convert support/testing/ over to pytest, then modify the dockerfile accordingly, which allows to write a better coomit log. Also, please organise your commit logs as (first line is the title): support/docker: install pytest instead of nose2 Now that the tuntime test infra has switched to using pytest instead of nose2, install the appropriate packages in the Dockerfile for our reference build environment. Note that pytest-parallel is not available i Debian Bullseye, so we install it (and its depenencies) from Pypi instead. Signed-off-by: You See more below... > Signed-off-by: Oguz Ozhan > --- > support/docker/Dockerfile | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile > index f54c31b54a..fd1527b1f9 100644 > --- a/support/docker/Dockerfile > +++ b/support/docker/Dockerfile > @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ > mercurial \ > openssh-server \ > python3 \ > + python3-pip \ > python3-flake8 \ > - python3-nose2 \ > python3-pexpect \ > python3-pytest \ > qemu-system-arm \ > @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ > apt-get -y autoremove && \ > apt-get -y clean > > +# To be able to run tests in parallel > +RUN pip install pytest-parallel Please, pin the version so that the image is reproducible. Also, if pytest-parallel has dependencies, explicitly install those at pinned versions too. Also note in the commit log that pytest-parallel is not available in bullseye, so we need to get it from Pypi instead (as in my suggestion). Regards, Yann E. MORIN. > # To be able to generate a toolchain with locales, enable one UTF-8 locale > RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ > /usr/sbin/locale-gen > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 23 16:50:26 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 18:50:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 Message-ID: <20221023165026.13707-1-fontaine.fabrice@gmail.com> - Drop all patches (already in version) - Replace README by LICENSE file added with https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/releases/tag/v1.2.13 Signed-off-by: Fabrice Fontaine --- ...hat-discarded-provided-CC-definition.patch | 28 --------------- package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ------------------- .../0003-fix-CVE-2022-37434-regression.patch | 32 ----------------- package/libzlib/libzlib.hash | 4 +-- package/libzlib/libzlib.mk | 7 ++-- 5 files changed, 4 insertions(+), 102 deletions(-) delete mode 100644 package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch delete mode 100644 package/libzlib/0002-fix-CVE-2022-37434.patch delete mode 100644 package/libzlib/0003-fix-CVE-2022-37434-regression.patch diff --git a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch b/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch deleted file mode 100644 index 398e1c9481..0000000000 --- a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 05796d3d8d5546cf1b4dfe2cd72ab746afae505d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 28 Mar 2022 18:34:10 -0700 -Subject: [PATCH] Fix configure issue that discarded provided CC definition. - -Downloaded from upstream commit: -https://github.com/madler/zlib/commit/05796d3d8d5546cf1b4dfe2cd72ab746afae505d - -Signed-off-by: Bernd Kuhls ---- - configure | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/configure b/configure -index 52ff4a04e..3fa3e8618 100755 ---- a/configure -+++ b/configure -@@ -174,7 +174,10 @@ if test -z "$CC"; then - else - cc=${CROSS_PREFIX}cc - fi -+else -+ cc=${CC} - fi -+ - cflags=${CFLAGS-"-O3"} - # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure - case "$cc" in diff --git a/package/libzlib/0002-fix-CVE-2022-37434.patch b/package/libzlib/0002-fix-CVE-2022-37434.patch deleted file mode 100644 index a61be48536..0000000000 --- a/package/libzlib/0002-fix-CVE-2022-37434.patch +++ /dev/null @@ -1,35 +0,0 @@ -From eff308af425b67093bab25f80f1ae950166bece1 Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Sat, 30 Jul 2022 15:51:11 -0700 -Subject: [PATCH] Fix a bug when getting a gzip header extra field with - inflate(). - -If the extra field was larger than the space the user provided with -inflateGetHeader(), and if multiple calls of inflate() delivered -the extra header data, then there could be a buffer overflow of the -provided space. This commit assures that provided space is not -exceeded. - -Backported from: eff308af425b67093bab25f80f1ae950166bece1 -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7be8c6366..7a7289749 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,9 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -+ len = state->head->extra_len - state->length; - if (state->head != Z_NULL && -- state->head->extra != Z_NULL) { -- len = state->head->extra_len - state->length; -+ state->head->extra != Z_NULL && -+ len < state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch b/package/libzlib/0003-fix-CVE-2022-37434-regression.patch deleted file mode 100644 index 46a58710d2..0000000000 --- a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 8 Aug 2022 10:50:09 -0700 -Subject: [PATCH] Fix extra field processing bug that dereferences NULL - state->head. - -The recent commit to fix a gzip header extra field processing bug -introduced the new bug fixed here. - -Backported from: 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7a7289749..2a3c4fe98 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,10 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -- len = state->head->extra_len - state->length; - if (state->head != Z_NULL && - state->head->extra != Z_NULL && -- len < state->head->extra_max) { -+ (len = state->head->extra_len - state->length) < -+ state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/libzlib.hash b/package/libzlib/libzlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/libzlib/libzlib.hash +++ b/package/libzlib/libzlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/libzlib/libzlib.mk b/package/libzlib/libzlib.mk index f75502326b..e344cc7ad9 100644 --- a/package/libzlib/libzlib.mk +++ b/package/libzlib/libzlib.mk @@ -4,19 +4,16 @@ # ################################################################################ -LIBZLIB_VERSION = 1.2.12 +LIBZLIB_VERSION = 1.2.13 LIBZLIB_SOURCE = zlib-$(LIBZLIB_VERSION).tar.xz LIBZLIB_SITE = http://www.zlib.net LIBZLIB_LICENSE = Zlib -LIBZLIB_LICENSE_FILES = README +LIBZLIB_LICENSE_FILES = LICENSE LIBZLIB_INSTALL_STAGING = YES LIBZLIB_PROVIDES = zlib LIBZLIB_CPE_ID_VENDOR = zlib LIBZLIB_CPE_ID_PRODUCT = zlib -# 0002-fix-CVE-2022-37434.patch -LIBZLIB_IGNORE_CVES = CVE-2022-37434 - # It is not possible to build only a shared version of zlib, so we build both # shared and static, unless we only want the static libs, and we eventually # selectively remove what we do not want -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 23 16:51:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 23 Oct 2022 18:51:00 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221021091531.2989489-2-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> <20221021091531.2989489-2-oguz.ozhan@mind.be> Message-ID: <20221023165100.GB1058960@scaer> Oguz, All, On 2022-10-21 11:15 +0200, Oguz Ozhan spake thusly: > From: Oguz Ozhan > > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 Please see my comment in patch 1 about providing a rationale for the switch. Please fold your commit logs at 72 chars. > - Changes in this patch: > - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests > - nose2 plugins removed which are not required anymore Don't describe the changes, explain them. E.g. "nose2 plugins removed which are not required anymore" we can see they get removed, and since the change is about switching away from nose2, it is obvious they get removed because they are not used anymore. > - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest This last part should be a patch by itself, coming first in the series, as it can be applied without doing the conversion yet. I have only had a cursory look at the changes, they look quite OK. Be sure to run "make check-flake8", I think I could spot too many lines at one place... Regards, Yann E. MORIN. > Signed-off-by: Oguz Ozhan > --- > support/testing/conf/unittest.cfg | 3 -- > support/testing/run-tests | 28 ++++++++++------- > support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ > 3 files changed, 36 insertions(+), 35 deletions(-) > > diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg > index 4f516fb80a..0dfffcfbda 100644 > --- a/support/testing/conf/unittest.cfg > +++ b/support/testing/conf/unittest.cfg > @@ -1,5 +1,2 @@ > -[unittest] > -plugins = nose2.plugins.mp > - > [multiprocess] > always-on = True > diff --git a/support/testing/run-tests b/support/testing/run-tests > index bf40019362..f887bc6715 100755 > --- a/support/testing/run-tests > +++ b/support/testing/run-tests > @@ -4,10 +4,16 @@ import multiprocessing > import os > import sys > > -import nose2 > +import pytest > > from infra.basetest import BRConfigTest > > +class PyTestCollector: > + def __init__(self): > + self.collected = [] > + def pytest_collection_modifyitems(self, items): > + for item in items: > + self.collected.append(item.nodeid) > > def main(): > parser = argparse.ArgumentParser(description='Run Buildroot tests') > @@ -42,12 +48,10 @@ def main(): > BRConfigTest.logtofile = False > > if args.list: > - print("List of tests") > - nose2.discover(argv=[script_path, > - "-s", test_dir, > - "-v", > - "--collect-only"], > - plugins=["nose2.plugins.collect"]) > + collect_plugin = PyTestCollector() > + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) > + for nodeid in collect_plugin.collected: > + print(nodeid) > return 0 > > if args.download is None: > @@ -106,15 +110,15 @@ def main(): > return 1 > BRConfigTest.timeout_multiplier = args.timeout_multiplier > > - nose2_args = ["-v", > - "-N", str(args.testcases), > - "-s", test_dir, > + pytest_args = ["--workers", str(args.testcases), > + "--rootdir", test_dir, > "-c", os.path.join(test_dir, "conf/unittest.cfg")] > > if args.testname: > - nose2_args += args.testname > + pytest_args += args.testname > + > + pytest.main(pytest_args) > > - nose2.discover(argv=nose2_args) > > > if __name__ == "__main__": > diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py > index 692291267e..d2390cccf1 100644 > --- a/support/testing/tests/fs/test_iso9660.py > +++ b/support/testing/tests/fs/test_iso9660.py > @@ -25,7 +25,7 @@ BASIC_CONFIG = \ > """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) > > > -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): > +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): > img = os.path.join(builddir, "images", "rootfs.iso9660") > if efi: > efi_img = os.path.join(builddir, "images", "OVMF.fd") > @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): > return exit_code > > > -def test_touch_file(emulator): > +def do_test_touch_file(emulator): > _, exit_code = emulator.run("touch test") > return exit_code > > @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): > infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): > infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > self.emulator.stop() > > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 23 16:57:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 18:57:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxmlpp: bump to version 5.0.2 Message-ID: <20221023165758.24401-1-fontaine.fabrice@gmail.com> https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS Signed-off-by: Fabrice Fontaine --- package/libxmlpp/libxmlpp.hash | 4 ++-- package/libxmlpp/libxmlpp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxmlpp/libxmlpp.hash b/package/libxmlpp/libxmlpp.hash index 50238eff00..a974de57e3 100644 --- a/package/libxmlpp/libxmlpp.hash +++ b/package/libxmlpp/libxmlpp.hash @@ -1,5 +1,5 @@ -# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.1.sha256sum -sha256 15c38307a964fa6199f4da6683a599eb7e63cc89198545b36349b87cf9aa0098 libxml++-5.0.1.tar.xz +# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.2.sha256sum +sha256 7c17cc3e5a2214314dee5a1354f4b436f266ded6185232a0534f352a76240d5a libxml++-5.0.2.tar.xz # Hash for license file sha256 a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7 COPYING diff --git a/package/libxmlpp/libxmlpp.mk b/package/libxmlpp/libxmlpp.mk index 874577eb1f..3db711826e 100644 --- a/package/libxmlpp/libxmlpp.mk +++ b/package/libxmlpp/libxmlpp.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXMLPP_VERSION_MAJOR = 5.0 -LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).1 +LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).2 LIBXMLPP_LICENSE = LGPL-2.1 (library), LGPL-2.0+ (examples) LIBXMLPP_LICENSE_FILES = COPYING LIBXMLPP_SOURCE = libxml++-$(LIBXMLPP_VERSION).tar.xz -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 17:04:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 19:04:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/libssh: bump to version 0.10.4 Message-ID: <20221023170441.30650-1-fontaine.fabrice@gmail.com> https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 Signed-off-by: Fabrice Fontaine --- package/libssh/libssh.hash | 4 ++-- package/libssh/libssh.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libssh/libssh.hash b/package/libssh/libssh.hash index 4dbab11374..90bc4c82d8 100644 --- a/package/libssh/libssh.hash +++ b/package/libssh/libssh.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://www.libssh.org/files/0.9/libssh-0.9.6.tar.xz.asc +# https://www.libssh.org/files/0.10/libssh-0.10.4.tar.xz.asc # with key 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D -sha256 86bcf885bd9b80466fe0e05453c58b877df61afa8ba947a58c356d7f0fab829b libssh-0.9.6.tar.xz +sha256 07392c54ab61476288d1c1f0a7c557b50211797ad00c34c3af2bbc4dbc4bd97d libssh-0.10.4.tar.xz sha256 1656186e951db1c010a8485481fa94587f7e53a26d24976bef97945ad0c4df5a COPYING diff --git a/package/libssh/libssh.mk b/package/libssh/libssh.mk index 4cadf83aee..5deb64b82e 100644 --- a/package/libssh/libssh.mk +++ b/package/libssh/libssh.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBSSH_VERSION_MAJOR = 0.9 -LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).6 +LIBSSH_VERSION_MAJOR = 0.10 +LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).4 LIBSSH_SOURCE = libssh-$(LIBSSH_VERSION).tar.xz LIBSSH_SITE = https://www.libssh.org/files/$(LIBSSH_VERSION_MAJOR) LIBSSH_LICENSE = LGPL-2.1 -- 2.35.1 From peter at korsgaard.com Sun Oct 23 17:23:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:23:49 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022112243.31889-1-neal.frager@amd.com> (Neal Frager's message of "Sat, 22 Oct 2022 05:22:43 -0600") References: <20221022112243.31889-1-neal.frager@amd.com> Message-ID: <871qqy4foa.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > --- > V1-> V2: > - improved build statement to support older hosts > - added bootgen.hash Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:24:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/irssi: bump to version 1.4.2 In-Reply-To: <20221021222412.109567-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:24:12 +0200") References: <20221021222412.109567-1-fontaine.fabrice@gmail.com> Message-ID: <87wn8q312w.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Use offical tarball link (from https://irssi.org/download) s/offical/official/ > https://irssi.org/2022/07/17/irssi-1.4.2-released/ > https://irssi.org/2022/06/12/irssi-1.4.1-released/ > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:24:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 In-Reply-To: <20221021223144.116049-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:31:44 +0200") References: <20221021223144.116049-1-fontaine.fabrice@gmail.com> Message-ID: <87sfje312q.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/drowe67/codec2/releases/tag/v1.0.3 > https://github.com/drowe67/codec2/releases/tag/v1.0.4 > https://github.com/drowe67/codec2/releases/tag/v1.0.5 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/whois: bump to version 5.5.14 In-Reply-To: <20221022205311.152019-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:53:11 +0200") References: <20221022205311.152019-1-fontaine.fabrice@gmail.com> Message-ID: <87o7u2311o.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/vnstat: bump to version 2.10 In-Reply-To: <20221022204631.147518-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:46:31 +0200") References: <20221022204631.147518-1-fontaine.fabrice@gmail.com> Message-ID: <87k04q3114.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/vergoh/vnstat/blob/v2.10/CHANGES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:46 +0200 Subject: [Buildroot] [PATCH] package/janet: bump to version 1.25.0 In-Reply-To: <20221023114841.505480-1-francois.perrad@gadz.org> (Francois Perrad's message of "Sun, 23 Oct 2022 13:48:41 +0200") References: <20221023114841.505480-1-francois.perrad@gadz.org> Message-ID: <87fsfe310l.fsf@dell.be.48ers.dk> >>>>> "Francois" == Francois Perrad writes: > Signed-off-by: Francois Perrad Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:20:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:20:53 +0200 Subject: [Buildroot] [git commit] package/libcodec2: bump to version 1.0.5 Message-ID: <20221023172606.A28B886EC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a380244766342aa7172dc7b572c99db322f74c38 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/drowe67/codec2/releases/tag/v1.0.3 https://github.com/drowe67/codec2/releases/tag/v1.0.4 https://github.com/drowe67/codec2/releases/tag/v1.0.5 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libcodec2/libcodec2.hash | 2 +- package/libcodec2/libcodec2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libcodec2/libcodec2.hash b/package/libcodec2/libcodec2.hash index 795ca37006..ba44aa015c 100644 --- a/package/libcodec2/libcodec2.hash +++ b/package/libcodec2/libcodec2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 14227963940d79e0ec5af810f37101b30e1c7e8555abd96c56b3c0473abac8ef libcodec2-1.0.1.tar.gz +sha256 cd9a065dd1c3477f6172a0156294f767688847e4d170103d1f08b3a075f82826 libcodec2-1.0.5.tar.gz sha256 9ebb6f82b7380a62ac74c5f0322c88e6744dedf2ebe1f54d6f088282b39844bf COPYING diff --git a/package/libcodec2/libcodec2.mk b/package/libcodec2/libcodec2.mk index b4f08a496e..b97db8ff59 100644 --- a/package/libcodec2/libcodec2.mk +++ b/package/libcodec2/libcodec2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCODEC2_VERSION = 1.0.1 +LIBCODEC2_VERSION = 1.0.5 LIBCODEC2_SITE = $(call github,drowe67,codec2,v$(LIBCODEC2_VERSION)) LIBCODEC2_LICENSE = LGPL-2.1 LIBCODEC2_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 23 17:20:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:20:29 +0200 Subject: [Buildroot] [git commit] package/irssi: bump to version 1.4.2 Message-ID: <20221023172606.9973786EC4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68e1b602dab1e08dc7c494cfdfeece5139796f4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official tarball link (from https://irssi.org/download) https://irssi.org/2022/07/17/irssi-1.4.2-released/ https://irssi.org/2022/06/12/irssi-1.4.1-released/ Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/irssi/irssi.hash | 2 +- package/irssi/irssi.mk | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/irssi/irssi.hash b/package/irssi/irssi.hash index 05555250a7..ecd339d83d 100644 --- a/package/irssi/irssi.hash +++ b/package/irssi/irssi.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 a647bfefed14d2221fa77b6edac594934dc672c4a560417b1abcbbc6b88d769f irssi-1.2.3.tar.xz +sha256 79a4765d2dfe153c440a1775b074d5d0682b96814c7cf92325b5e15ce50e26a8 irssi-1.4.2.tar.xz # Locally calculated sha256 a1a27cb2ecee8d5378fbb3562f577104a445d6d66fee89286e16758305e63e2b COPYING diff --git a/package/irssi/irssi.mk b/package/irssi/irssi.mk index da71622a04..c2d02289ad 100644 --- a/package/irssi/irssi.mk +++ b/package/irssi/irssi.mk @@ -4,11 +4,9 @@ # ################################################################################ -IRSSI_VERSION = 1.2.3 +IRSSI_VERSION = 1.4.2 IRSSI_SOURCE = irssi-$(IRSSI_VERSION).tar.xz -# Do not use the github helper here. The generated tarball is *NOT* the -# same as the one uploaded by upstream for the release. -IRSSI_SITE = https://github.com/irssi/irssi/releases/download/$(IRSSI_VERSION) +IRSSI_SITE = https://codeberg.org/irssi/irssi/releases/download/$(IRSSI_VERSION) IRSSI_LICENSE = GPL-2.0+ IRSSI_LICENSE_FILES = COPYING IRSSI_CPE_ID_VENDOR = irssi From peter at korsgaard.com Sun Oct 23 17:25:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:22 +0200 Subject: [Buildroot] [git commit] package/vnstat: bump to version 2.10 Message-ID: <20221023172606.C46CE86EC4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c78c6f23c543525f352924544fb299784e0838c8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/vergoh/vnstat/blob/v2.10/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/vnstat/vnstat.hash | 2 +- package/vnstat/vnstat.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/vnstat/vnstat.hash b/package/vnstat/vnstat.hash index 191dc4ec0b..bad4325d90 100644 --- a/package/vnstat/vnstat.hash +++ b/package/vnstat/vnstat.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 03f858a7abf6bd85bb8cd595f3541fc3bd31f8f400ec092ef3034825ccb77c25 vnstat-2.8.tar.gz +sha256 a9c61744e5cd8c366e2db4d282badc74021ddb614bd65b41240937997e457d25 vnstat-2.10.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/vnstat/vnstat.mk b/package/vnstat/vnstat.mk index 91f0233f56..3b2951b8c9 100644 --- a/package/vnstat/vnstat.mk +++ b/package/vnstat/vnstat.mk @@ -4,7 +4,7 @@ # ################################################################################ -VNSTAT_VERSION = 2.8 +VNSTAT_VERSION = 2.10 VNSTAT_SITE = http://humdi.net/vnstat VNSTAT_LICENSE = GPL-2.0 VNSTAT_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 23 17:21:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:21:12 +0200 Subject: [Buildroot] [git commit] package/bootgen: add bootgen host package Message-ID: <20221023172606.AE4CF86EC9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08a0dea25f4e92ac5aa474876f706ddb9452fe2b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager Signed-off-by: Peter Korsgaard --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.hash | 3 +++ package/bootgen/bootgen.mk | 25 +++++++++++++++++++++++++ 5 files changed, 40 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.hash b/package/bootgen/bootgen.hash new file mode 100644 index 0000000000..5d77c164f3 --- /dev/null +++ b/package/bootgen/bootgen.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 7e07c75aa3e3965c8e33faefde037877f78130451cebc2056b096db9c66acbb3 bootgen-xilinx_v2022.2.tar.gz +sha256 4da5f5eff0592e5d275f1871faf9e9a4fc0f6346027bfb777fa59d0aa6a59aa3 LICENSE diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..88bc73b604 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,25 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +define HOST_BOOTGEN_BUILD_CMDS + $(MAKE) $(HOST_CONFIGURE_OPTS) \ + LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ + INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ + CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" \ + -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) From peter at korsgaard.com Sun Oct 23 17:24:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:42 +0200 Subject: [Buildroot] [git commit] package/whois: bump to version 5.5.14 Message-ID: <20221023172606.B91F186ECD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6024f64a7d0513398e2040a58ffcd9f2dbaeb566 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/whois/whois.hash | 4 ++-- package/whois/whois.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/whois/whois.hash b/package/whois/whois.hash index 3b5bbee23d..fb140fa198 100644 --- a/package/whois/whois.hash +++ b/package/whois/whois.hash @@ -1,5 +1,5 @@ -# From http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois/whois_5.5.13.dsc -sha256 62e613f116d5635aea6684238db00b030a6602ffc79462e4a0a8e62cb184b5d7 whois_5.5.13.tar.xz +# From http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois/whois_5.5.14.dsc +sha256 bf9c2cb307d5419b34ad401eecf2820b8f69660db41cf0762e5da71fa2df68e8 whois_5.5.14.tar.xz # Hash for license file: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/whois/whois.mk b/package/whois/whois.mk index 42a9e83954..5a85bea358 100644 --- a/package/whois/whois.mk +++ b/package/whois/whois.mk @@ -4,8 +4,8 @@ # ################################################################################ -WHOIS_VERSION = 5.5.13 -WHOIS_SITE = http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois +WHOIS_VERSION = 5.5.14 +WHOIS_SITE = http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz WHOIS_DEPENDENCIES = \ host-pkgconf \ From peter at korsgaard.com Sun Oct 23 17:25:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:40 +0200 Subject: [Buildroot] [git commit] package/janet: bump to version 1.25.0 Message-ID: <20221023172606.CF82F86EC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ae39821e26e28c2e24d54fcaf66824fc02f3f240 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Peter Korsgaard --- package/janet/janet.hash | 2 +- package/janet/janet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/janet/janet.hash b/package/janet/janet.hash index 473955e391..5cd3db1c29 100644 --- a/package/janet/janet.hash +++ b/package/janet/janet.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0b4d5d3632e0d376d9512ea8ea262f31f75c132b488dd7870f472acae709a865 janet-1.23.0.tar.gz +sha256 5bf9b680adbc5511835aec3787117df37032eef796e1664edbbcfd540b6acaf3 janet-1.25.0.tar.gz # Locally calculated sha256 e2d2ae8360d95386af751ac7d1a3da36ea8ceb230e5f0eba7eb762547b1c58c9 LICENSE diff --git a/package/janet/janet.mk b/package/janet/janet.mk index 070eae1cf0..284e6c2642 100644 --- a/package/janet/janet.mk +++ b/package/janet/janet.mk @@ -4,7 +4,7 @@ # ################################################################################ -JANET_VERSION = 1.23.0 +JANET_VERSION = 1.25.0 JANET_SITE = $(call github,janet-lang,janet,v$(JANET_VERSION)) JANET_LICENSE = MIT JANET_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 18:54:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinyssh: bump to version 20220801 In-Reply-To: <20221022205934.156714-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:59:34 +0200") References: <20221022205934.156714-1-fontaine.fabrice@gmail.com> Message-ID: <87bkq22wwm.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/janmojzis/tinyssh/releases/tag/20220101 > https://github.com/janmojzis/tinyssh/releases/tag/20220222 > https://github.com/janmojzis/tinyssh/releases/tag/20220305 > https://github.com/janmojzis/tinyssh/releases/tag/20220311 > https://github.com/janmojzis/tinyssh/releases/tag/20220801 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:54:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:21 +0200 Subject: [Buildroot] [git commit] package/tinyssh: bump to version 20220801 Message-ID: <20221023185437.B344D86EF5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=88661b8aa11ac0a6770e809fbc87f2dfec506fcc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/janmojzis/tinyssh/releases/tag/20220101 https://github.com/janmojzis/tinyssh/releases/tag/20220222 https://github.com/janmojzis/tinyssh/releases/tag/20220305 https://github.com/janmojzis/tinyssh/releases/tag/20220311 https://github.com/janmojzis/tinyssh/releases/tag/20220801 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/tinyssh/tinyssh.hash | 2 +- package/tinyssh/tinyssh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tinyssh/tinyssh.hash b/package/tinyssh/tinyssh.hash index 30b5d13419..462ffb9002 100644 --- a/package/tinyssh/tinyssh.hash +++ b/package/tinyssh/tinyssh.hash @@ -1,3 +1,3 @@ # locally computed -sha256 2a051437878998c7782d9d38ef13e5e7a76435ae6b9c3e9ec492c3a567bd6314 tinyssh-20210601.tar.gz +sha256 234656fc8d369608eb5d0f3a26280e0e38e2e6b134cfc610b6e24bce176acd4f tinyssh-20220801.tar.gz sha256 b5dc19477e29f4111e1c16cd89ec0782f5a07b1a30e3bdb7c155425b81b12c46 LICENCE diff --git a/package/tinyssh/tinyssh.mk b/package/tinyssh/tinyssh.mk index 05716bcfe1..1472f7ead1 100644 --- a/package/tinyssh/tinyssh.mk +++ b/package/tinyssh/tinyssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -TINYSSH_VERSION = 20210601 +TINYSSH_VERSION = 20220801 TINYSSH_SITE = $(call github,janmojzis,tinyssh,$(TINYSSH_VERSION)) TINYSSH_LICENSE = Public Domain, CC0-1.0 TINYSSH_LICENSE_FILES = LICENCE From peter at korsgaard.com Sun Oct 23 18:55:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: bump to version 1.1.2 In-Reply-To: <20221022202857.128289-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:28:57 +0200") References: <20221022202857.128289-1-fontaine.fabrice@gmail.com> Message-ID: <877d0q2wvj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:55:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:48 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/uftp: bump to version 5.0.1 In-Reply-To: <20221022203335.131939-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:33:35 +0200") References: <20221022203335.131939-1-fontaine.fabrice@gmail.com> Message-ID: <8735be2wuj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Version 5.0.1 - 8/2/2022 > - On very low speed transfers (<10Kbps) sessions would time out due to > a very large interpacket transmission interval. Fixed by putting a > lower limit on the advertised GRTT of of the interpacket transmission > interval. > - Sending of ABORT messages on early shutdown would sometimes fail due > to OpenSSL cleanup functions running before application cleanup. > Changed the ordering of atexit() handlers to ensure OpenSSL cleanup > happens last. > - Fixed missing timestamp update when clients read CONG_CTRL messages > - Fix to GRTT handling on server to ensure it doesn't fall below minumim. > - Fixed bypassed checking of existing files on client for backup > - Various logging fixes > https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Update tarball hash Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:55:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:33 +0200 Subject: [Buildroot] [git commit] package/uftp: bump to version 5.0.1 Message-ID: <20221023185600.C2BEA86F41@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=744607a5cb966e3100494d9fb7f40172336c5605 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..e47cba9394 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 f0435fbc8e9ffa125e05600cb6c7fc933d7d587f5bae41b257267be4f2ce0e61 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt From peter at korsgaard.com Sun Oct 23 18:54:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:52 +0200 Subject: [Buildroot] [git commit] package/usbguard: bump to version 1.1.2 Message-ID: <20221023185600.B9B3986F1F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=343b049007a6dd4283d871b51475ce5d2484bf0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/usbguard/usbguard.hash | 4 ++-- package/usbguard/usbguard.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/usbguard/usbguard.hash b/package/usbguard/usbguard.hash index a69240b3f9..6c10dc9d3e 100644 --- a/package/usbguard/usbguard.hash +++ b/package/usbguard/usbguard.hash @@ -1,5 +1,5 @@ -# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.1/usbguard-1.1.1.tar.gz.sum -sha256 460ebfb4ffc5609739a202a3a1d9fda1c30de033b634845b8baa136352bfb432 usbguard-1.1.1.tar.gz +# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.2/usbguard-1.1.2.tar.gz.sum +sha256 dcf5c90f3f93030e04df1baeb8d388b678c40dd48b135ea12a7be7dee8944934 usbguard-1.1.2.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index 26dc40d15b..e0c9b58221 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBGUARD_VERSION = 1.1.1 +USBGUARD_VERSION = 1.1.2 USBGUARD_SITE = https://github.com/USBGuard/usbguard/releases/download/usbguard-$(USBGUARD_VERSION) USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 19:01:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 21:01:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/easy-rsa: bump to version 3.1.1 In-Reply-To: <20221021221133.13293-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:11:33 +0200") References: <20221021221133.13293-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t61hzv.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 19:01:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 21:01:49 +0200 Subject: [Buildroot] [git commit] package/easy-rsa: bump to version 3.1.1 Message-ID: <20221023190201.7F17786F74@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cd0916bf80b7e4a5369354c1e428bf78937d64f8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/easy-rsa/easy-rsa.hash | 2 +- package/easy-rsa/easy-rsa.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/easy-rsa/easy-rsa.hash b/package/easy-rsa/easy-rsa.hash index e304c367fa..5be651bde0 100644 --- a/package/easy-rsa/easy-rsa.hash +++ b/package/easy-rsa/easy-rsa.hash @@ -1,5 +1,5 @@ # Locally computed: (after verifying gpg sig) -sha512 be2dedde19eaf923622da61db34ecb2e926b3f15a60a0c3d9858d3126dbe3b4af9c0f6674f964516572b50611ffd1d254952f27dc5de867bd7a67474c89be5f0 EasyRSA-3.1.0.tgz +sha512 8c8d1f4baf90475d4cce334d116b7f12b82687157796b25560600b5098769226ae2f60f02982c75266b625d66b465360ffa815260ad44850923e3fbc9ba8540a EasyRSA-3.1.1.tgz # Hash for license files sha256 7c4a4fc71745d93a87278801f1bca555562ca23f21e18293add64b9e6f6b7bf1 COPYING.md diff --git a/package/easy-rsa/easy-rsa.mk b/package/easy-rsa/easy-rsa.mk index 7c32c1d83d..4ea45506dd 100644 --- a/package/easy-rsa/easy-rsa.mk +++ b/package/easy-rsa/easy-rsa.mk @@ -4,7 +4,7 @@ # ################################################################################ -EASY_RSA_VERSION = 3.1.0 +EASY_RSA_VERSION = 3.1.1 EASY_RSA_SOURCE = EasyRSA-$(EASY_RSA_VERSION).tgz EASY_RSA_SITE = https://github.com/OpenVPN/easy-rsa/releases/download/v$(EASY_RSA_VERSION) EASY_RSA_LICENSE = GPL-2.0 From peter at korsgaard.com Sun Oct 23 20:28:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/libunistring: bump to version 1.1 In-Reply-To: <20221021220956.699772-1-paguilar@paguilar.org> (Pedro Aguilar's message of "Sat, 22 Oct 2022 00:09:56 +0200") References: <20221021220956.699772-1-paguilar@paguilar.org> Message-ID: <87r0yy1dz6.fsf@dell.be.48ers.dk> >>>>> "Pedro" == Pedro Aguilar writes: > https://savannah.gnu.org/projects/libunistring/ > Signed-off-by: Pedro Aguilar Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:28:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdmtx: bump to version 0.7.7 In-Reply-To: <20221021223630.122214-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:36:30 +0200") References: <20221021223630.122214-1-fontaine.fabrice@gmail.com> Message-ID: <87mt9m1dyy.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:29:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:29:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: bump to version 0.17 In-Reply-To: <20221021224357.129675-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:43:57 +0200") References: <20221021224357.129675-1-fontaine.fabrice@gmail.com> Message-ID: <87ilka1dyk.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://lists.x.org/archives/xorg-announce/2022-October/003226.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:28:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:23 +0200 Subject: [Buildroot] [git commit] package/libdmtx: bump to version 0.7.7 Message-ID: <20221023202923.E31AC86F54@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8a08b862c6c22e7a7323efb82c8f3b3a662498f6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdmtx/libdmtx.hash | 2 +- package/libdmtx/libdmtx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libdmtx/libdmtx.hash b/package/libdmtx/libdmtx.hash index 98eef9aeeb..8b176d737a 100644 --- a/package/libdmtx/libdmtx.hash +++ b/package/libdmtx/libdmtx.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 be0c5275695a732a5f434ded1fcc232aa63b1a6015c00044fe87f3a689b75f2e libdmtx-0.7.5.tar.gz +sha256 7aa62adcefdd6e24bdabeb82b3ce41a8d35f4a0c95ab0c4438206aecafd6e1a1 libdmtx-0.7.7.tar.gz sha256 fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79 LICENSE diff --git a/package/libdmtx/libdmtx.mk b/package/libdmtx/libdmtx.mk index 04e089f1f7..00d37fb94e 100644 --- a/package/libdmtx/libdmtx.mk +++ b/package/libdmtx/libdmtx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDMTX_VERSION = 0.7.5 +LIBDMTX_VERSION = 0.7.7 LIBDMTX_SITE = $(call github,dmtx,libdmtx,v$(LIBDMTX_VERSION)) LIBDMTX_LICENSE = BSD-2-Clause or Special Permission LIBDMTX_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 20:28:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:15 +0200 Subject: [Buildroot] [git commit] package/libunistring: bump to version 1.1 Message-ID: <20221023202923.D759386FA4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e78c580e2361f1d1055bc81e1a822d29c021b1b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://savannah.gnu.org/projects/libunistring/ Signed-off-by: Pedro Aguilar Signed-off-by: Peter Korsgaard --- package/libunistring/libunistring.hash | 2 +- package/libunistring/libunistring.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libunistring/libunistring.hash b/package/libunistring/libunistring.hash index 81ffd4fb0c..8267d56327 100644 --- a/package/libunistring/libunistring.hash +++ b/package/libunistring/libunistring.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature # https://ftp.gnu.org/gnu/libunistring/libunistring-0.9.10.tar.xz.sig -sha256 5bab55b49f75d77ed26b257997e919b693f29fd4a1bc22e0e6e024c246c72741 libunistring-1.0.tar.xz +sha256 827c1eb9cb6e7c738b171745dac0888aa58c5924df2e59239318383de0729b98 libunistring-1.1.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c COPYING.LIB diff --git a/package/libunistring/libunistring.mk b/package/libunistring/libunistring.mk index a69eacd676..8d5b6f54ec 100644 --- a/package/libunistring/libunistring.mk +++ b/package/libunistring/libunistring.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBUNISTRING_VERSION = 1.0 +LIBUNISTRING_VERSION = 1.1 LIBUNISTRING_SITE = $(BR2_GNU_MIRROR)/libunistring LIBUNISTRING_SOURCE = libunistring-$(LIBUNISTRING_VERSION).tar.xz LIBUNISTRING_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 23 20:28:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:32 +0200 Subject: [Buildroot] [git commit] package/libpciaccess: bump to version 0.17 Message-ID: <20221023202923.F0FA386FA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd6e79299fa480ceb8a6942898a45efaa4999f2e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://lists.x.org/archives/xorg-announce/2022-October/003226.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- .../0001-pciaccess.pc.in-add-Libs.Private.patch | 28 ---------------------- package/libpciaccess/libpciaccess.hash | 7 ++---- package/libpciaccess/libpciaccess.mk | 4 ++-- 3 files changed, 4 insertions(+), 35 deletions(-) diff --git a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch b/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch deleted file mode 100644 index e520dd03d8..0000000000 --- a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch +++ /dev/null @@ -1,28 +0,0 @@ -From e1f9fc0a11559c1200005c4bfe34cd217ec117b4 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Oct 2019 19:03:32 +0200 -Subject: [PATCH] pciaccess.pc.in: add Libs.Private - -Add Libs.Private in pciaccess.pc.in so applications that wants to link -statically with pciaccess will know that they have to link with its -dependencies such as -lz - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/xorg/lib/libpciaccess/merge_requests/10] ---- - pciaccess.pc.in | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/pciaccess.pc.in b/pciaccess.pc.in -index 706c5f7..c2da3d9 100644 ---- a/pciaccess.pc.in -+++ b/pciaccess.pc.in -@@ -8,3 +8,4 @@ Description: Library providing generic access to the PCI bus and devices. - Version: @PACKAGE_VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lpciaccess -+Libs.Private: @PCIACCESS_LIBS@ --- -2.23.0 - diff --git a/package/libpciaccess/libpciaccess.hash b/package/libpciaccess/libpciaccess.hash index 2082be7d04..27ec59a452 100644 --- a/package/libpciaccess/libpciaccess.hash +++ b/package/libpciaccess/libpciaccess.hash @@ -1,7 +1,4 @@ -# From https://lists.x.org/archives/xorg-announce/2019-July/003014.html -md5 b34e2cbdd6aa8f9cc3fa613fd401a6d6 libpciaccess-0.16.tar.bz2 -sha1 ffaa13f2df5f822da1089b55223b217c142ef919 libpciaccess-0.16.tar.bz2 -sha256 214c9d0d884fdd7375ec8da8dcb91a8d3169f263294c9a90c575bf1938b9f489 libpciaccess-0.16.tar.bz2 -sha512 2f250048a270dfc0823d4bdd613aa272c58a80eaafd922850f56c4b6f7a45a263ed4cf521b52b49f04484ea44ebefb7407d079aa058318a5751ffb181e38fed1 libpciaccess-0.16.tar.bz2 +# From https://lists.x.org/archives/xorg-announce/2022-October/003226.html +sha512 8484605c66ef18c8d8a3e029a6d33e26fcaa450c1263790d89ac8b0a160ffb2dfceaa6140ac9ad7d8087283ecbec8ac801f757e44890d547c3cbecd2c922ca47 libpciaccess-0.17.tar.xz # Hash for license file: sha256 47012fd746980d1712ac4f3841ab6164bda1d2b84880760e45dbe1e1dc07f608 COPYING diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index d9a3a4e481..68d46b7f50 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBPCIACCESS_VERSION = 0.16 -LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.bz2 +LIBPCIACCESS_VERSION = 0.17 +LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.xz LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 23 20:40:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:40:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libshout: bump to version 2.4.6 Message-ID: <20221023204044.23467-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) and so autoreconf - libvorbis is optional since https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS Signed-off-by: Fabrice Fontaine --- ...re.ac-add-an-option-to-disable-tools.patch | 51 ------------------- package/libshout/Config.in | 1 - package/libshout/libshout.hash | 4 +- package/libshout/libshout.mk | 13 +++-- 4 files changed, 11 insertions(+), 58 deletions(-) delete mode 100644 package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch diff --git a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch b/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch deleted file mode 100644 index 5c20db72e9..0000000000 --- a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 148b56bf894192cef6dd133715e295260b934a71 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 5 Mar 2021 15:50:32 +0100 -Subject: [PATCH] configure.ac: add an option to disable tools - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.xiph.org/xiph/icecast-libshout/-/issues/2331] ---- - Makefile.am | 5 ++++- - configure.ac | 5 +++++ - 2 files changed, 9 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index ea855cf..79241f1 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -3,10 +3,13 @@ - AUTOMAKE_OPTIONS = 1.6 foreign - ACLOCAL_AMFLAGS = -I m4 - --SUBDIRS = include src doc win32 tools -+SUBDIRS = include src doc win32 - if HAVE_EXAMPLES - SUBDIRS += examples - endif -+if HAVE_TOOLS -+SUBDIRS += tools -+endif - - EXTRA_DIST = INSTALL m4/shout.m4 m4/acx_pthread.m4 \ - m4/ogg.m4 m4/vorbis.m4 m4/xiph_compiler.m4 m4/xiph_net.m4 \ -diff --git a/configure.ac b/configure.ac -index 264b9b0..34f971c 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -100,6 +100,11 @@ AC_ARG_ENABLE([examples], - AS_HELP_STRING([--disable-examples],[Do not build example code])) - AM_CONDITIONAL([HAVE_EXAMPLES],[test "${enable_examples}" != "no"]) - -+dnl Allow tools not to be build -+AC_ARG_ENABLE([tools], -+ AS_HELP_STRING([--disable-tools],[Do not build tools])) -+AM_CONDITIONAL([HAVE_TOOLS],[test "${enable_tools}" != "no"]) -+ - dnl Module checks - XIPH_NET - --- -2.30.0 - diff --git a/package/libshout/Config.in b/package/libshout/Config.in index f8749b9183..6a7560b349 100644 --- a/package/libshout/Config.in +++ b/package/libshout/Config.in @@ -1,7 +1,6 @@ config BR2_PACKAGE_LIBSHOUT bool "libshout" select BR2_PACKAGE_LIBOGG - select BR2_PACKAGE_LIBVORBIS help Libshout is a library for communicating with and sending data to an icecast server. It handles the socket connection, the diff --git a/package/libshout/libshout.hash b/package/libshout/libshout.hash index ae43e0a9c8..d562b5231b 100644 --- a/package/libshout/libshout.hash +++ b/package/libshout/libshout.hash @@ -1,8 +1,8 @@ # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA512SUMS -sha512 290844185da16961f03434d3e341573dd6cb0139e5fa81902903021b641382d2629302d7c356bc591b35656754e07f4e44a8d9e782e092b17a051b9ae8f54341 libshout-2.4.5.tar.gz +sha512 e8478cdbf9a27674c16a7b620d1576f2e31a47262b8e29b314d0f46d4e5be24b9a29790b7b226f48939bc34cacf5734fae0aa5686c7ed5879cdbd827ff8e0339 libshout-2.4.6.tar.gz # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA256SUMS -sha256 d9e568668a673994ebe3f1eb5f2bee06e3236a5db92b8d0c487e1c0f886a6890 libshout-2.4.5.tar.gz +sha256 39cbd4f0efdfddc9755d88217e47f8f2d7108fa767f9d58a2ba26a16d8f7c910 libshout-2.4.6.tar.gz # Hash for license file sha256 7a4436f9ec37603356791c87de3bc444989befd2682d29efb3d97604e04c1852 COPYING diff --git a/package/libshout/libshout.mk b/package/libshout/libshout.mk index 4afb762de6..be63786795 100644 --- a/package/libshout/libshout.mk +++ b/package/libshout/libshout.mk @@ -4,14 +4,12 @@ # ################################################################################ -LIBSHOUT_VERSION = 2.4.5 +LIBSHOUT_VERSION = 2.4.6 LIBSHOUT_SITE = https://downloads.xiph.org/releases/libshout LIBSHOUT_LICENSE = LGPL-2.0+ LIBSHOUT_LICENSE_FILES = COPYING LIBSHOUT_INSTALL_STAGING = YES -LIBSHOUT_DEPENDENCIES = host-pkgconf libogg libvorbis -# We're patching configure.ac -LIBSHOUT_AUTORECONF = YES +LIBSHOUT_DEPENDENCIES = host-pkgconf libogg LIBSHOUT_CONF_OPTS = \ --disable-examples \ --disable-tools @@ -23,6 +21,13 @@ else LIBSHOUT_CONF_OPTS += --disable-theora endif +ifeq ($(BR2_PACKAGE_LIBVORBIS),y) +LIBSHOUT_CONF_OPTS += --enable-vorbis +LIBSHOUT_DEPENDENCIES += libvorbis +else +LIBSHOUT_CONF_OPTS += --disable-vorbis +endif + ifeq ($(BR2_PACKAGE_SPEEX),y) LIBSHOUT_CONF_OPTS += --enable-speex LIBSHOUT_DEPENDENCIES += speex -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 20:47:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:47:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpng: bump to version 1.6.38 Message-ID: <20221023204719.31316-1-fontaine.fabrice@gmail.com> Version 1.6.38 [September 14, 2022] Added configurations and scripts for continuous integration. Fixed various errors in the handling of tRNS, hIST and eXIf. Implemented many stability improvements across all platforms. Updated the internal documentation. Update hash of LICENSE file (update in year with https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES Signed-off-by: Fabrice Fontaine --- package/libpng/libpng.hash | 10 +++++----- package/libpng/libpng.mk | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libpng/libpng.hash b/package/libpng/libpng.hash index b57b1251a0..34b0a8a8b6 100644 --- a/package/libpng/libpng.hash +++ b/package/libpng/libpng.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.37/ -md5 015e8e15db1eecde5f2eb9eb5b6e59e9 libpng-1.6.37.tar.xz -sha1 3ab93fabbf4c27e1c4724371df408d9a1bd3f656 libpng-1.6.37.tar.xz +# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.38/ +md5 122e6b7837811698563083b352bc8ca2 libpng-1.6.38.tar.xz +sha1 60960ed110094843e5efa221df6a7d21614a4dba libpng-1.6.38.tar.xz # Locally computed: -sha256 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca libpng-1.6.37.tar.xz -sha256 bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b LICENSE +sha256 b3683e8b8111ebf6f1ac004ebb6b0c975cd310ec469d98364388e9cedbfa68be libpng-1.6.38.tar.xz +sha256 dfe5a536b0e5a531f844fb9c101a3089aca60772a503893b8e15f9457e369960 LICENSE diff --git a/package/libpng/libpng.mk b/package/libpng/libpng.mk index e4e629bbb5..43b4f373f1 100644 --- a/package/libpng/libpng.mk +++ b/package/libpng/libpng.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPNG_VERSION = 1.6.37 +LIBPNG_VERSION = 1.6.38 LIBPNG_SERIES = 16 LIBPNG_SOURCE = libpng-$(LIBPNG_VERSION).tar.xz LIBPNG_SITE = http://downloads.sourceforge.net/project/libpng/libpng$(LIBPNG_SERIES)/$(LIBPNG_VERSION) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 20:54:40 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:54:40 +0200 Subject: [Buildroot] [PATCH 1/1] package/libminiupnpc: bump to version 2.2.4 Message-ID: <20221023205440.36753-1-fontaine.fabrice@gmail.com> 2022/02/20: upnpc: use of @ to replace local lan address 2021/11/09: python module : Allow to specify the root description url - Drop patch (already in version) - Update hash of LICENSE file (license "refined" for github with https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz Signed-off-by: Fabrice Fontaine --- ...akeLists-txt-fix-install-for-headers.patch | 43 ------------------- package/libminiupnpc/libminiupnpc.hash | 4 +- package/libminiupnpc/libminiupnpc.mk | 2 +- 3 files changed, 3 insertions(+), 46 deletions(-) delete mode 100644 package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch diff --git a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch b/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch deleted file mode 100644 index 2e4c8a69e6..0000000000 --- a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f82b0563a72e33800f5918ead68c41bcda1fd4c1 Mon Sep 17 00:00:00 2001 -From: heitbaum -Date: Fri, 1 Oct 2021 00:00:27 +1000 -Subject: [PATCH] miniupnpc/CMakeLists.txt: fix install for headers - -[Retrieved from: -https://github.com/miniupnp/miniupnp/commit/f82b0563a72e33800f5918ead68c41bcda1fd4c1] -Signed-off-by: Fabrice Fontaine ---- - miniupnpc/CMakeLists.txt | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 0553eeb3..6b0904c0 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -221,16 +221,16 @@ endif () - - if (NOT UPNPC_NO_INSTALL) - install (FILES -- miniupnpc.h -- miniwget.h -- upnpcommands.h -- igd_desc_parse.h -- upnpreplyparse.h -- upnperrors.h -- upnpdev.h -- miniupnpctypes.h -- portlistingparse.h -- miniupnpc_declspec.h -+ include/miniupnpc.h -+ include/miniwget.h -+ include/upnpcommands.h -+ include/igd_desc_parse.h -+ include/upnpreplyparse.h -+ include/upnperrors.h -+ include/upnpdev.h -+ include/miniupnpctypes.h -+ include/portlistingparse.h -+ include/miniupnpc_declspec.h - DESTINATION include/miniupnpc - ) - diff --git a/package/libminiupnpc/libminiupnpc.hash b/package/libminiupnpc/libminiupnpc.hash index 4714dd6f48..5dca8dd6cf 100644 --- a/package/libminiupnpc/libminiupnpc.hash +++ b/package/libminiupnpc/libminiupnpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 dce41b4a4f08521c53a0ab163ad2007d18b5e1aa173ea5803bd47a1be3159c24 miniupnpc-2.2.3.tar.gz -sha256 90bb92bf524970569296022fea562c85a4ec4d99a16f3aef2144d13d7087b631 LICENSE +sha256 481a5e4aede64e9ef29895b218836c3608d973e77a35b4f228ab1f3629412c4b miniupnpc-2.2.4.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/libminiupnpc/libminiupnpc.mk b/package/libminiupnpc/libminiupnpc.mk index f3661396ca..9dc5c719a9 100644 --- a/package/libminiupnpc/libminiupnpc.mk +++ b/package/libminiupnpc/libminiupnpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMINIUPNPC_VERSION = 2.2.3 +LIBMINIUPNPC_VERSION = 2.2.4 LIBMINIUPNPC_SOURCE = miniupnpc-$(LIBMINIUPNPC_VERSION).tar.gz LIBMINIUPNPC_SITE = http://miniupnp.free.fr/files LIBMINIUPNPC_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:09:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:09:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/lensfun: bump to version 0.3.3 Message-ID: <20221023210951.48256-1-fontaine.fabrice@gmail.com> Switch to new upstream site to get latest release https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ Signed-off-by: Fabrice Fontaine --- package/lensfun/Config.in | 2 +- package/lensfun/lensfun.hash | 5 +---- package/lensfun/lensfun.mk | 4 ++-- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/package/lensfun/Config.in b/package/lensfun/Config.in index 7ec49020ee..7c424f5351 100644 --- a/package/lensfun/Config.in +++ b/package/lensfun/Config.in @@ -11,7 +11,7 @@ config BR2_PACKAGE_LENSFUN actually use Lensfun to process your images you need an image editing application with Lensfun support. - http://lensfun.sourceforge.net + https://lensfun.github.io if BR2_PACKAGE_LENSFUN diff --git a/package/lensfun/lensfun.hash b/package/lensfun/lensfun.hash index cb56f32b56..f03d0b54ae 100644 --- a/package/lensfun/lensfun.hash +++ b/package/lensfun/lensfun.hash @@ -1,7 +1,4 @@ -# From https://sourceforge.net/projects/lensfun/files/0.3.2 -sha1 1d978b15aa7304d66a4931fa37ca9f8f89396c16 lensfun-0.3.2.tar.gz -md5 247e59a0812ec451f6cd0d20b3379cb5 lensfun-0.3.2.tar.gz # Locally calculated -sha256 ae8bcad46614ca47f5bda65b00af4a257a9564a61725df9c74cb260da544d331 lensfun-0.3.2.tar.gz +sha256 57ba5a0377f24948972339e18be946af12eda22b7c707eb0ddd26586370f6765 lensfun-0.3.3.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 docs/gpl-3.0.txt sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c docs/lgpl-3.0.txt diff --git a/package/lensfun/lensfun.mk b/package/lensfun/lensfun.mk index 9258409f57..f82ed44495 100644 --- a/package/lensfun/lensfun.mk +++ b/package/lensfun/lensfun.mk @@ -4,8 +4,8 @@ # ################################################################################ -LENSFUN_VERSION = 0.3.2 -LENSFUN_SITE = https://sourceforge.net/projects/lensfun/files/$(LENSFUN_VERSION) +LENSFUN_VERSION = 0.3.3 +LENSFUN_SITE = $(call github,lensfun,lensfun,v$(LENSFUN_VERSION)) LENSFUN_LICENSE = LGPL-3.0+ (libraries), GPL-3.0+ (programs) LENSFUN_LICENSE_FILES = docs/gpl-3.0.txt docs/lgpl-3.0.txt LENSFUN_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:29:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:29:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: bump to version 2.1.8 Message-ID: <20221023212956.60845-1-fontaine.fabrice@gmail.com> 2.1.8 (as of August 5th, 2022) ------------------------------ - Add support for --bounceback to perform a repsonsiveness test (see man page for other options) - add support for working loads with --bounceback - Fix to wait_tick with Mac OS X - Various python pyflows commits - add support for client side tcp-write-time histograms and mean/min/max - add support for human readable dscp or -T values (see man page) - udp_accept no longer accepts packets from a previous run as a new connection, this can occur with long network delays - multiple isoch bug fixes for both UDP and TCP - isoch server provides mean/min/max/stdev for both frames and packets - UDP max MTU discovery, requires configure.ac will support --enable-discover-defaultlen prior to compile - Drop first patch (already in version) - Drop second patch (not needed since https://sourceforge.net/p/iperf2/code/ci/de5cb9954617309eecb8ae7d24b14e6b1e0c11eb) https://sourceforge.net/projects/iperf2/files/ Signed-off-by: Fabrice Fontaine --- .../iperf/0001-Fix-build-with-musl-libc.patch | 67 ------------------- .../0002-compat-gettcpinfo.c-fix-build.patch | 34 ---------- package/iperf/iperf.hash | 4 +- package/iperf/iperf.mk | 2 +- 4 files changed, 3 insertions(+), 104 deletions(-) delete mode 100644 package/iperf/0001-Fix-build-with-musl-libc.patch delete mode 100644 package/iperf/0002-compat-gettcpinfo.c-fix-build.patch diff --git a/package/iperf/0001-Fix-build-with-musl-libc.patch b/package/iperf/0001-Fix-build-with-musl-libc.patch deleted file mode 100644 index 269079ee1e..0000000000 --- a/package/iperf/0001-Fix-build-with-musl-libc.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 6766ab322a9eb8c73f8276be9cdea356eb124de0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 11 Nov 2021 07:58:10 +0200 -Subject: [PATCH] Fix build with musl libc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -musl libc defines its own struct ethhdr that conflicts with the kernel -define one. The kernel headers provide a way to suppress its struct -ethhdr. For that to work the libc headers must precede the kernel. Move -the kernel linux/if_tun.h include below libc net/ethernet.h. That fixes -the following build failure: - -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/net/ethernet.h:10, - from ../include/headers.h:117, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/netinet/if_ether.h:116:8: error: redefinition of ?struct ethhdr? - 116 | struct ethhdr { - | ^~~~~~ -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_tun.h:20, - from ../include/headers.h:110, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_ether.h:148:8: note: originally defined here - 148 | struct ethhdr { - | ^~~~~~ - -Fixes bug #157. - -Signed-off-by: Baruch Siach ---- -Upstream status: sent to Robert McMahon - - include/headers.h | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/include/headers.h b/include/headers.h -index 00e0ea0dba42..887490475381 100644 ---- a/include/headers.h -+++ b/include/headers.h -@@ -106,11 +106,6 @@ typedef bool _Bool; - #include - #endif - --#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) --#include --#include --#endif -- - - // AF_PACKET HEADERS - #if defined(HAVE_LINUX_FILTER_H) && defined(HAVE_AF_PACKET) -@@ -146,6 +141,11 @@ typedef bool _Bool; - #define IPV6HDRLEN 40 - #endif // HAVE_AF_PACKET - -+#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) -+#include -+#include -+#endif -+ - #ifdef WIN32 - - /* Windows config file */ --- -2.33.0 - diff --git a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch b/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch deleted file mode 100644 index 786c7d1873..0000000000 --- a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a3339604bafa99f66e12687efc2c50d2e2df1276 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 12 Dec 2021 20:03:04 +0100 -Subject: [PATCH] compat/gettcpinfo.c: fix build - -Fix the following build failure raised since commit -c8f861a0a07b0606a581f2658c71959ad9417923: - -gettcpinfo.c: In function 'gettcpinfo': -gettcpinfo.c:101:42: error: expected declaration or statement at end of input - 101 | inline void gettcpinfo (int sock, struct ReportStruct *sample) { - | ^~~~~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/073e070478f0cda34784af96bb3a802c3aac8f72 - -Signed-off-by: Fabrice Fontaine ---- - compat/gettcpinfo.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/compat/gettcpinfo.c b/compat/gettcpinfo.c -index 4e11e2a..1d3791a 100644 ---- a/compat/gettcpinfo.c -+++ b/compat/gettcpinfo.c -@@ -99,4 +99,5 @@ inline void gettcpinfo (SOCKET sock, struct ReportStruct *sample) { - }; - #else - inline void gettcpinfo (int sock, struct ReportStruct *sample) { -+}; - #endif --- -2.33.0 - diff --git a/package/iperf/iperf.hash b/package/iperf/iperf.hash index 2e1f433dc7..34218bcf3b 100644 --- a/package/iperf/iperf.hash +++ b/package/iperf/iperf.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/iperf2/files/ -sha1 41bd049625cbecda2bf5b6a6cc12a6c5baec549b iperf-2.1.6.tar.gz +sha1 7725efffc6ef46fe5247ee326c39e5fa2eadf1eb iperf-2.1.8.tar.gz # Locally computed: -sha256 4a43e44439b95622aebeee55754a17d1c94076032e90620dfc1ab9908cb9e080 iperf-2.1.6.tar.gz +sha256 8e2cf2fbc9d0d4d1cf9d109b1e328459f9622993dc9a4c5a7dc8a2088fb7beaf iperf-2.1.8.tar.gz sha256 5f9f5c4feca3347c3b3c0ada8b16b4e6b698aac4e6f016a24adf61a5915336d1 COPYING diff --git a/package/iperf/iperf.mk b/package/iperf/iperf.mk index f999ff4ac2..47944880a3 100644 --- a/package/iperf/iperf.mk +++ b/package/iperf/iperf.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF_VERSION = 2.1.6 +IPERF_VERSION = 2.1.8 IPERF_SITE = http://downloads.sourceforge.net/project/iperf2 IPERF_LICENSE = MIT-like IPERF_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:42:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:42:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf3: bump to version 3.12 Message-ID: <20221023214220.70941-1-fontaine.fabrice@gmail.com> Update hash of LICENSE file (update in year with https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) https://github.com/esnet/iperf/blob/3.12/RELNOTES.md Signed-off-by: Fabrice Fontaine --- package/iperf3/iperf3.hash | 6 +++--- package/iperf3/iperf3.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/iperf3/iperf3.hash b/package/iperf3/iperf3.hash index c96d68cd99..15c75b6dac 100644 --- a/package/iperf3/iperf3.hash +++ b/package/iperf3/iperf3.hash @@ -1,4 +1,4 @@ -# From https://downloads.es.net/pub/iperf/iperf-3.10.1.tar.gz.sha256 -sha256 03bc9760cc54a245191d46bfc8edaf8a4750f0e87abca6764486972044d6715a iperf-3.10.1.tar.gz +# From https://downloads.es.net/pub/iperf/iperf-3.12.tar.gz.sha256 +sha256 72034ecfb6a7d6d67e384e19fb6efff3236ca4f7ed4c518d7db649c447e1ffd6 iperf-3.12.tar.gz # Locally computed -sha256 0e1cb1921904626f0d3e86cacc0e28333140f0f9957267cff0b9d185645743ed LICENSE +sha256 a5c2e3d799f2835156e565a3de4fad33d32ed289cdc9e414dfaf75719fd12ef9 LICENSE diff --git a/package/iperf3/iperf3.mk b/package/iperf3/iperf3.mk index 8c57c61fce..9041c86575 100644 --- a/package/iperf3/iperf3.mk +++ b/package/iperf3/iperf3.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF3_VERSION = 3.10.1 +IPERF3_VERSION = 3.12 IPERF3_SITE = https://downloads.es.net/pub/iperf IPERF3_SOURCE = iperf-$(IPERF3_VERSION).tar.gz IPERF3_LICENSE = BSD-3-Clause, BSD-2-Clause, MIT -- 2.35.1 From nolange79 at gmail.com Sun Oct 23 21:47:22 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Sun, 23 Oct 2022 23:47:22 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> Message-ID: Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > While the /var factory seems to be working in most cases, there have > been suggestions that it may be slightly and subtely borken in some > (rare? edge?) cases, especially about symlinks. Had to dig up an old post of mine (not the only one touching on that), some issues are: - it kills previous files in /usr/share/factory/var - it doesn't handle symlinks (just think of /var already containing a symlink into that factory), especially relative ones. - it has sideeffects with tmpfile .confs that are ordered before and touch /var - it has sideeffects with other PRE_CMD_HOOKS touching /var (Post is from mid 2020, so forgive me if my memory is fuzzy, but I had already practical problems with atleast the last 2 of those). To me this is just not a robust solution > > An other solution is to pre-populate /var at build time, by way of > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > runtime. > > This is slightly accrobatic, though, and requires a few hoops: > - first, we create a tmpfs > - there, we create three directories: > - the first to bind-mount /var as it is, i.e. read-only > - the second as the read-write upper for the overlayfs > - the third as the "working area" for the overlays ..and we depend on overlayfs > > This is done with two systemd units: > - rootfs-bindmount-var.service: prepares up to bind-mounting /var into > the tmpfs > - var.mount: a mount unit which actually mounts the overlayfs. > > Users who want to provide an actual storage to keep /var across reboots, > will have to provide their own mount units and make it RequiredBy and > BoundBy our var.mount unit. > > Systemd units courtesy Norbert, with slight tweaks and cleanups. Yeah, Im not fine with the tweaks to drop the symlink /usr/lib/systemd/system/var.mount -> ../var.mount (and the added intstall section) First in the same local-fs "target" you could mount /etc, making this a complicated hidden issue, I don't know when systemd reloads, I believe only after that target. Second, this should be enabled by default, and in a way even when /etc is borked/not ready. If a user really wants to disable the mount, he can mask it. > > Signed-off-by: Yann E. MORIN > Cc: Norbert Lange > Cc: Romain Naour > Cc: Je?re?my Rosen > --- > .../{ => factory}/var.mount | 0 > .../overlayfs/rootfs-bindmount-var.service | 21 ++++++++++++++++ > .../skeleton-init-systemd/overlayfs/var.mount | 15 ++++++++++++ > .../skeleton-init-systemd.mk | 20 +++++++++++++--- > system/Config.in | 24 +++++++++++++------ > 5 files changed, 70 insertions(+), 10 deletions(-) > rename package/skeleton-init-systemd/{ => factory}/var.mount (100%) > create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount > > diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/factory/var.mount > similarity index 100% > rename from package/skeleton-init-systemd/var.mount > rename to package/skeleton-init-systemd/factory/var.mount > diff --git a/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > new file mode 100644 > index 0000000000..e412a56c49 > --- /dev/null > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > @@ -0,0 +1,21 @@ > +[Unit] > +Description=Bind-mount variable storage (/var) > +Documentation=man:file-hierarchy(7) > +ConditionPathIsSymbolicLink=!/var > +# ConditionPathIsReadWrite=!/var > +DefaultDependencies=no > +Conflicts=umount.target > +Before=local-fs.target umount.target > +After=local-fs-pre.target A am actually considering changing that to: Before=local-fs-pre.target umount.target # After=local-fs-pre.target It does not depend an anything, so no technical reason to order it after anything. And it is technically a preparation for the actual local-fs.target. > + > +[Service] > +Type=oneshot > +RemainAfterExit=yes > +ExecStartPre=-/bin/mkdir /run/varoverlay > +ExecStartPre=/bin/mount --make-private -n -t tmpfs tmpfs_root_ovl /run/varoverlay > +ExecStartPre=/bin/mkdir /run/varoverlay/lower /run/varoverlay/upper /run/varoverlay/work > +ExecStart=/bin/mount --make-private -n --bind /var /run/varoverlay/lower > + > +ExecStop=/bin/umount -n /run/varoverlay/lower > +ExecStopPost=/bin/umount -n /run/varoverlay > +ExecStopPost=/bin/rmdir /run/varoverlay > diff --git a/package/skeleton-init-systemd/overlayfs/var.mount b/package/skeleton-init-systemd/overlayfs/var.mount > new file mode 100644 > index 0000000000..fab223c27b > --- /dev/null > +++ b/package/skeleton-init-systemd/overlayfs/var.mount > @@ -0,0 +1,15 @@ > +[Unit] > +Description=variable storage (/var) > +Documentation=man:file-hierarchy(7) > +ConditionPathIsSymbolicLink=!/var > +After=rootfs-bindmount-var.service > +BindsTo=rootfs-bindmount-var.service > + > +[Mount] > +What=overlay_var > +Where=/var > +Type=overlay > +Options=lowerdir=/run/varoverlay/lower,upperdir=/run/varoverlay/upper,workdir=/run/varoverlay/work,redirect_dir=on,index=on,xino=on > + > +[Install] > +WantedBy=local-fs.target See above. > diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk > index 69991265a5..07a4180db0 100644 > --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk > +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk > @@ -33,7 +33,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW > endef > > ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) > -define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY > rm -rf $(TARGET_DIR)/usr/share/factory/var > mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var > mkdir -p $(TARGET_DIR)/var > @@ -52,11 +52,25 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > || exit 1; \ > fi; \ > done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf > - $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/factory/var.mount \ > $(TARGET_DIR)/usr/lib/systemd/system/var.mount > endef > -SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY > endif # BR2_INIT_SYSTEMD_VAR_FACTORY > + > +ifeq ($(BR2_INIT_SYSTEMD_VAR_OVERLAYFS),y) > +define SKELETON_INIT_SYSTEMD_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_OVERLAY_FS) > +endef > +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/var.mount \ > + $(TARGET_DIR)/usr/lib/systemd/system/var.mount > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/rootfs-bindmount-var.service \ > + $(TARGET_DIR)/usr/lib/systemd/system/rootfs-bindmount-var.service > +endef > +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS > +endif # BR2_INIT_SYSTEMD_VAR_OVERLAYFS > + > endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW > > ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) > diff --git a/system/Config.in b/system/Config.in > index 074fda509c..0c064b8211 100644 > --- a/system/Config.in > +++ b/system/Config.in > @@ -164,6 +164,14 @@ choice > Select how Buildroot provides a read-write /var when the > rootfs is not remounted read-write. > > + Note: Buildroot uses a tmpfs, either as a mount point or as > + the upper of an overlayfs, so as to at least make the system > + bootable out of the box; mounting a filesystem from actual > + storage is left to the integration, as it is too specific and > + may need preparatory work like partitionning a device and/or > + formatting a filesystem first, which falls out of the scope > + of Buildroot. > + > config BR2_INIT_SYSTEMD_VAR_FACTORY > bool "build a factory to populate a tmpfs" > help > @@ -176,17 +184,19 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY > It probably does not play very well with triggering a call > to systemd-tmpfiles at build time (below). > > - Note: Buildroot mounts a tmpfs on /var to at least make the > - system bootable out of the box; mounting a filesystem from > - actual storage is left to the integration, as it is too > - specific and may need preparatory work like partitionning a > - device and/or formatting a filesystem first, so that falls > - out of the scope of Buildroot. > - > To use persistent storage, provide a systemd dropin for the > var.mount unit, that overrides the What and Type, and possibly > the Options and After, fields. > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > + bool "mount an overlayfs backed by a tmpfs" > + help > + Mount an overlayfs on /var, with the upper as a tmpfs. > + > + To use a persistent storage, provide your own systemd unit(s) > + that eventually mount that persistent storage on > + /run/varoverlay/upper/ perhaps pull in or depend on overlayfs here > + > config BR2_INIT_SYSTEMD_VAR_CUSTOM > bool "something else" > help > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > Generally the unit and directory names could be more logical, and for allowing the user to specify a custom mount by reading an EnvironmentFile in the rootfs-bindmount-var unit. Regards, Norbert [1] http://lists.busybox.net/pipermail/buildroot/2020-July/287016.html PS. Planning to add some more comments next week, should find dome time here, huge commit msgs to get through. From fontaine.fabrice at gmail.com Sun Oct 23 21:49:02 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:49:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: bump to version 5.43 Message-ID: <20221023214902.85185-1-fontaine.fabrice@gmail.com> Update hash of src/vasprintf.c (typo fixed with https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) https://github.com/file/file/blob/FILE5_43/ChangeLog Signed-off-by: Fabrice Fontaine --- package/file/file.hash | 6 +++--- package/file/file.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/file/file.hash b/package/file/file.hash index 33875776eb..49fa9e1e1b 100644 --- a/package/file/file.hash +++ b/package/file/file.hash @@ -1,7 +1,7 @@ # Locally calculated after verifying signature -# ftp://ftp.astron.com/pub/file/file-5.41.tar.gz.asc +# ftp://ftp.astron.com/pub/file/file-5.43.tar.gz.asc # using key BE04995BA8F90ED0C0C176C471112AB16CB33B3A -sha256 13e532c7b364f7d57e23dfeea3147103150cb90593a57af86c10e4f6e411603f file-5.41.tar.gz +sha256 8c8015e91ae0e8d0321d94c78239892ef9dbc70c4ade0008c0e95894abfb1991 file-5.43.tar.gz sha256 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274 COPYING sha256 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462 src/mygetopt.h -sha256 c4fa92d6504b88484a12140fe3e24b9b29b0112717f94b1ff4205d54828b1c70 src/vasprintf.c +sha256 cc3d8704489d08eaefcaee8c639cc6436c6f0f6b2b03986d3ba7521a1a1d2fc9 src/vasprintf.c diff --git a/package/file/file.mk b/package/file/file.mk index c06975460f..9b751e2696 100644 --- a/package/file/file.mk +++ b/package/file/file.mk @@ -4,7 +4,7 @@ # ################################################################################ -FILE_VERSION = 5.41 +FILE_VERSION = 5.43 FILE_SITE = ftp://ftp.astron.com/pub/file FILE_LICENSE = BSD-2-Clause, BSD-4-Clause (one file), BSD-3-Clause (one file) FILE_LICENSE_FILES = COPYING src/mygetopt.h src/vasprintf.c -- 2.35.1 From giulio.benetti at benettiengineering.com Sun Oct 23 22:14:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 24 Oct 2022 00:14:25 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc Message-ID: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> Add local patch(pending upstream[0]) to fix build failure with PowerPc due to a package re-defition of get_ra() that is only defined in Linux PowerPc implementation. [0]: https://github.com/lwfinger/rtl8723bu/pull/192 Fixes: http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ Signed-off-by: Giulio Benetti --- ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch diff --git a/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch new file mode 100644 index 0000000000..2665a6d031 --- /dev/null +++ b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch @@ -0,0 +1,46 @@ +From dde7bddfddddb7212f2d9671391e2096d770c449 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Sun, 23 Oct 2022 22:57:41 +0200 +Subject: [PATCH] Fix build failure on PowerPc architecture + +In PowerPc Linux only get_ra() exists[0] and conflicts with local get_ra() +that has a completely different purpose. So let's rename local get_ra() +to wifi_get_ra() to make it different from Linux's get_ra(). + +[0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/include/asm/disassemble.h#n49 + +Signed-off-by: Giulio Benetti +--- + hal/rtl8723bu_recv.c | 2 +- + include/wifi.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/hal/rtl8723bu_recv.c b/hal/rtl8723bu_recv.c +index a2fc82b..39e5044 100644 +--- a/hal/rtl8723bu_recv.c ++++ b/hal/rtl8723bu_recv.c +@@ -288,7 +288,7 @@ void update_recvframe_phyinfo( + !pattrib->icv_err && !pattrib->crc_err && + _rtw_memcmp(get_hdr_bssid(wlanhdr), get_bssid(&padapter->mlmepriv), ETH_ALEN)); + +- pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); ++ pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(wifi_get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); + + pkt_info.bPacketBeacon = pkt_info.bPacketMatchBSSID && (GetFrameSubType(wlanhdr) == WIFI_BEACON); + sa = get_ta(wlanhdr); +diff --git a/include/wifi.h b/include/wifi.h +index 5dc32eb..23578cc 100644 +--- a/include/wifi.h ++++ b/include/wifi.h +@@ -373,7 +373,7 @@ __inline static int IS_MCAST(unsigned char *da) + return _FALSE; + } + +-__inline static unsigned char * get_ra(unsigned char *pframe) ++__inline static unsigned char * wifi_get_ra(unsigned char *pframe) + { + unsigned char *ra; + ra = GetAddr1Ptr(pframe); +-- +2.34.1 + -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 23 22:54:02 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 23 Oct 2022 18:54:02 -0400 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-6-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> <20221006095833.1116173-6-aperez@igalia.com> Message-ID: On Thu, Oct 6, 2022 at 6:00 AM Adrian Perez de Castro wrote: > > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > This imports a small patch to properly pick libdrm compiler flags, > fetched from the upstream repository. > > Signed-off-by: Adrian Perez de Castro Tested-by: James Hilliard > --- > ...m-dependency-when-protocols-are-used.patch | 36 ++++++++++++++++++ > package/cog/cog.hash | 8 ++-- > package/cog/cog.mk | 37 ++++++++++--------- > 3 files changed, 60 insertions(+), 21 deletions(-) > create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > > diff --git a/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > new file mode 100644 > index 0000000000..44e555c121 > --- /dev/null > +++ b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > @@ -0,0 +1,36 @@ > +From 9a1982c563e218b7695e6a174c8230d3b063eb27 Mon Sep 17 00:00:00 2001 > +From: Gary Bisson > +Date: Thu, 6 Oct 2022 09:04:22 +0200 > +Subject: [PATCH] wl: Fix libdrm dependency when protocols are used > + > +As the comment says, cog-platform-wl.c needs drm_fourcc.h to build > +properly when wayland_weston_direct_display is enabled. > + > +However, libdrm.pc doesn't specify "include/libdrm" as part of its > +includedir but whether in its cflags. So use the compile_args dep > +instead of includes to fix the build failure. > + > +Signed-off-by: Gary Bisson > +(cherry picked from commit 32c1d9533bcdc22cbc01d02bf2e6ac0d4bda2dc2) > +Signed-off-by: Adrian Perez de Castro > +[Upstream status: https://github.com/Igalia/cog/pull/501] > +--- > + platform/wayland/meson.build | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/platform/wayland/meson.build b/platform/wayland/meson.build > +index f1e18ec..31e4460 100644 > +--- a/platform/wayland/meson.build > ++++ b/platform/wayland/meson.build > +@@ -67,7 +67,7 @@ if wayland_platform_weston_protocols.length() > 0 > + > + # The code uses definitions from the drm_fourcc.h header, but does not > + # need to link the library; libdrm here is only a build-time dependency. > +- wayland_platform_dependencies += [dependency('libdrm').partial_dependency(includes: true)] > ++ wayland_platform_dependencies += [dependency('libdrm').partial_dependency(compile_args: true)] > + endif > + > + > +-- > +2.38.0 > + > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > index aa128d73d8..a2c55c4b94 100644 > --- a/package/cog/cog.hash > +++ b/package/cog/cog.hash > @@ -1,7 +1,7 @@ > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > # Hashes for license files: > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > index 1f24bebee4..241c4e309c 100644 > --- a/package/cog/cog.mk > +++ b/package/cog/cog.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -COG_VERSION = 0.14.1 > +COG_VERSION = 0.16.0 > COG_SITE = https://wpewebkit.org/releases > COG_SOURCE = cog-$(COG_VERSION).tar.xz > COG_INSTALL_STAGING = YES > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > COG_LICENSE = MIT > COG_LICENSE_FILES = COPYING > COG_CONF_OPTS = \ > - -DCOG_BUILD_PROGRAMS=ON \ > - -DCOG_PLATFORM_HEADLESS=ON \ > - -DINSTALL_MAN_PAGES=OFF \ > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > - -DUSE_SOUP2=ON > + -Ddocumentation=false \ > + -Dmanpages=false \ > + -Dprograms=true \ > + -Dsoup2=enabled \ > + -Dcog_home_uri='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > + -Dplatforms='$(subst $(space),$(comma),$(strip $(COG_PLATFORMS_LIST)))' > + > +COG_PLATFORMS_LIST = headless > > ifeq ($(BR2_PACKAGE_WESTON),y) > -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=ON > +COG_CONF_OPTS += -Dwayland_weston_direct_display=true > COG_DEPENDENCIES += weston > else > -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=OFF > +COG_CONF_OPTS += -Dwayland_weston_direct_display=false > endif > > ifeq ($(BR2_PACKAGE_COG_PLATFORM_FDO),y) > -COG_CONF_OPTS += -DCOG_PLATFORM_WL=ON > +COG_PLATFORMS_LIST += wayland > COG_DEPENDENCIES += libxkbcommon wayland-protocols > -else > -COG_CONF_OPTS += -DCOG_PLATFORM_WL=OFF > endif > > ifeq ($(BR2_PACKAGE_COG_PLATFORM_DRM),y) > -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=ON > +COG_PLATFORMS_LIST += drm > COG_DEPENDENCIES += libdrm libinput libgbm libegl udev > -else > -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=OFF > endif > > ifeq ($(BR2_PACKAGE_COG_USE_SYSTEM_DBUS),y) > -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=ON > +COG_CONF_OPTS += -Dcog_dbus_control=system > else > -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=OFF > +COG_CONF_OPTS += -Dcog_dbus_control=user > endif > > -$(eval $(cmake-package)) > +ifeq ($(BR2_PACKAGE_LIBMANETTE),y) > +COG_DEPENDENCIES += libmanette > +endif > + > +$(eval $(meson-package)) > -- > 2.38.0 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From t_fahmy_bassem at hotmail.com Mon Oct 24 04:56:56 2022 From: t_fahmy_bassem at hotmail.com (Bassem Fahmy) Date: Mon, 24 Oct 2022 04:56:56 +0000 Subject: [Buildroot] buildroot defconfig fragments Message-ID: Hello, Can buildroot defconfig take .config fragments? something like what is suggested here: https://stackoverflow.com/questions/44078245/is-it-possible-to-use-config-fragments-with-buildroots-config Thanks, Bassem Sent from Outlook From thomas.petazzoni at bootlin.com Mon Oct 24 05:43:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 05:43:44 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-23 Message-ID: <20221024054351.A7A414023F@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-23 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 5 | 1 | 0 | 6 | 2022.08.x | 15 | 17 | 0 | 32 | master | 146 | 290 | 13 | 449 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 18 crun-1.5 | 17 glibc-2.36-44-g2628500f5dff... | 15 sysvinit-2.99 | 14 brltty | 11 host-sentry-cli-1.59.0 | 11 xz-5.2.7 | 10 autofs-5.1.8 | 9 libarchive-3.6.1 | 9 btrfs-progs-5.16.2 | 8 host-f2fs-tools-1.15.0 | 8 linux-6.0.1 | 7 efivar-38 | 6 host-binutils-2.38 | 6 host-pahole-73383b3a39afe86... | 6 systemd-250.4 | 6 unknown | 6 igd2-for-linux-2.1 | 5 libglib2-2.72.3 | 5 linuxptp-3.1.1 | 5 file-5.41 | 4 gobject-introspection-1.72.0 | 4 lxc-4.0.12 | 4 ocf-linux-20171122 | 4 casync-4ad9bcb94bc83ff36cfc... | 3 check-0.15.2 | 3 dahdi-linux-5c840cf43838e06... | 3 gerbera-1.10.0 | 3 host-binutils-2.37 | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 host-rust-1.64.0 | 3 linux-pam-1.5.2 | 3 gensio-2.5.5 | 2 host-bootgen-xilinx_v2022.2 | 2 host-gcc-final-12.2.0 | 2 libcap-ng-0.8.3 | 2 libcodec2-1.0.5 | 2 linux-5.10.145-cip17 | 2 open62541-v1.3.3 | 2 perl-5.34.1 | 2 php-8.1.11 | 2 qemu-7.1.0 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 acpitool-0.5.1 | 1 afboot-stm32-3566acd582e553... | 1 bat-0.19.0 | 1 berkeleydb-5.3.28 | 1 boost-1.80.0 | 1 cairo-1.16.0 | 1 cryptodev-linux-1.12 | 1 docker-proxy-f6ccccb1c082a4... | 1 dust-0.8.1 | 1 elfutils-0.186 | 1 f2fs-tools-1.15.0 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-moby-buildkit-0.10.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 ipmitool-1_8_19 | 1 kmod-29 | 1 lapack-3.10.1 | 1 libabseil-cpp-20220623.1 | 1 libgcrypt | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libgpg-error-1.45 | 1 libmad-0.15.1b | 1 libmdbx-0.11.12 | 1 libtorrent-rasterbar-1.2.15 | 1 linux-5.10.145-cip17-rt7 | 1 lttng-modules-2.13.1 | 1 makedumpfile-1.7.0 | 1 memcached-1.6.16 | 1 mtd-2.1.3 | 1 musl-1.2.3 | 1 netsniff-ng-0.6.8 | 1 openpgm-5-3-128 | 1 opensbi-0.9 | 1 rsync-3.2.5 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 scrypt-1.3.1 | 1 stress-ng-0.13.05 | 1 sysklogd-2.4.4 | 1 usbguard-1.1.1 | 1 xfsprogs-5.14.2 | 1 xxhash-0.8.1 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b42c522c36c82775db295b76cbe200d4d858fcc6 | i686 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/63321cac0ca778792f216e6def6410bd69194d20 | aarch64_be | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/ba94788cadbf08fa8fb6f5130dd81401a92b1744 | ORPH powerpc64le | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/40b888ac633c3ccd0b21b58847a6d9c1b90e6b8c | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/552369988be9691080f30bac6d2a9521f312fabf | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f60929222aa300a41bd0e37a2f923edb54e25d3e | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad4b77419b637e392abf247aae0bf70c512f3a92 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/12e5d2913cdc7cfb9cbc74be3848d8e15aaa370f | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/40d14b3276dac432b9b822fa6d9672a4cf67bab1 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a36a039c73d87191aa625a94105b0aed7c9c4132 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3c70d49a56919324118026baa96c7980c335a175 | arceb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b3cf807bbc1b249fa384779e9f40b3c42a9c1069 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4ecc7893ace4d0df13e498abf96ee8a0b540b21d | sh4 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/916e61d2c8d77c82452b76d7fb79a62a412aebc4 | x86_64 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c43dd19364a6f5b5c88ec6cf102ca8f08fa05118 | sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d7bca45e21413503bf05ba7d960034dab36e9ce3 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/eec0f014c35a979a2093ae774ae0c06824298b5b | sh4a | brltty | TIM | http://autobuild.buildroot.net/results/30e0e17c18625be3cd0dbeff0f944fdb8017f87b | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0c4b7ac99e3487562186489ab9146d3ee622b9d0 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/7642546d19f6c797762d251003e43c3884d42403 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/5f7733176c71d45f1d45d23234ded6070b43cce3 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f59507cf4ea86156db0a0ebcb1f8adb32503b71c | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/1048ea11d2f88d23a9ed3e205b0b2be5e771f914 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/7aea549f3c94ec87c331b90f9af47c25130e3f3c | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/702e38f7ad9459a7d2239b059a7c9dac043deac5 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/6eca433e6d726621f7105a89ec5b8683b63e3a6a | i686 | brltty | TIM | http://autobuild.buildroot.net/results/382a1f08f8a3a0f14f0d4b825cb52fd537e139e0 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/af56b53bef9de7aa73919371e08a5ef6c32ffad5 | mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8dbe943828f5c5e2be5c762be34e80470ba26cb1 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c16077ad34663513bc27a686d3c92c6fd18db3d2 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cd9dc3bd988d2333584ff2a73909afed2fcdee96 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/eae0f617c1b95316badaf532acd1f37222c802fb | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9d8a4ccd57a9aaf3124c42c3f039d953689eddbd | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/bef1f6fea6f806467c7a9805cf538f908ce402b4 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9eb5a4d2248f930286098385c6e36311169195db | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/51aa36ba72b39e969e6e4e8741452feb06bd19aa | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/36bef4bcd8dc710c25a0008f4f3abff5f7dd7cb9 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/40b6310897b3ceaa510d22bb351bd4075efbe867 | x86_64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1cb60274ba252e2d730a23825c610fa6511ebb5b | arceb | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1eb00289ee6b9121e44c9e6e8a4851eec4a5d1d0 | mips64el | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/167857619d6d0352bde53b3c980c650dda5c3e83 | ORPH s390x | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/cf0374b90004afa8892ca65d3da9a906653a2afb | ORPH powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/c628e5a3254227ab317c3c53d71b8f4a2cb01e69 | ORPH mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4a01771dc39bd846b977d51d0d2bcd3a83b59ce3 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ce62622db2c80e3b3514848dfe84cbaa4ed73589 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b94f25b08507a4f8f6f68b6d0ae107add7bf0ebc | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/754fc5d6c65639c914a6663b642be6211a7ca379 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8ede7a25ca3557853c343d35435734bc6982414f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3209d5d8005eb3aa58591f705a0963b8a614358a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d0c08367604714c80fe1304bba50a6e6b0533580 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b7db29b71113358f5459872d3fcb487b2748e967 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/110c6c805ed8b0437fe923513c2c099e6edfd5c5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/61c29ce6d978506de4dbbd6f1fe5289ec65b034c | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a905d611c04a4322a64aad6b5117de3497804d7b | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6f9a7365c3d3a5ef34da3f93adf6675a77144dc6 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6e92eebf56237f24bf79260bd372201a23febdce | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7e97d0c5047e0687777e388af413f4b4dea341fe | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7bddd2fa5c743032e9c0d7c0eeafe450b7b7e683 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/348624f02b80119a1cdb24a4dcf47fb9274adbd4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de3f5fac766e1d7928f0009dcc957ee3bfa77b | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/07ce1e1f85567311caf1e279fe7920749466d81d | ORPH sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/2a8dfed68c57d515bdee2609d0f8a69763b1ec0e | x86_64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ff912172a9b28286faa5cec3a95080add93718e5 | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/721a6a939b04b89611e4c71a09b0997a87e9b938 | arm | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/78cb7fd7ee323c27d677847d3b7b5449ef77ca29 | mipsel | dust-0.8.1 | NOK | http://autobuild.buildroot.net/results/348c074d94f03c8c1adde8394d5b8c1c272a8af6 | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/335fe474e0e9cf367f71a5dac0cfe435823f1f4c | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/313a8bb1b62bb0b21bf4d4d4cb2a6e8200922b63 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/9cdd78a8e27757d3fe440728cfdd0290c13390ce | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/4a7eda370abd78e66a207547cb225882f6395585 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/279b8898bd863be04ccf8e4b0fe74c4060460ab1 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/46dd8c7c5f391426d60f9ad22fa6bc078ec35b16 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a3f0044be07694b8e565f6796f3483dcc23c3700 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4c33bb623413d165babe08fc75723780bb22c0fa | x86_64 | file-5.41 | NOK | http://autobuild.buildroot.net/results/e9df7ce1c6f2c647577ed71cabc455e834d53eee | ORPH mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/8b15d8869590df76dc9f5ca54ac17a0246a534b0 | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/ba3b2040cf4706539d05ca948fb68b3140e7ec18 | ORPH powerpc | file-5.41 | NOK | http://autobuild.buildroot.net/results/4f03255bb6869b741c952c8ae0ae92e50e055db0 | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/949165f4cc1fc4e0ab3414bf2106e3c878463ccb | microblazeel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/1ac24641338a39a1d8bb467549fb061d4d50f76d | arc | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/dbb9d18074c7fb6fbf0f5417a09a06ff80c28728 | mipsel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/9f182ce53790079f2a2190438d7f906219150442 | or1k | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/f2db6855b19cbdcfc08c053f66dac115c927fb59 | xtensa | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/e9a3b52ef3dbe3fc34bb1d86eb15d01f9d0fc3f6 | mips64 | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/d3179d776c6592e8769aae5da3114d10236aa9db | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/ca41cde80a05d129c34dfddc948392febfb044ca | sparc64 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/382358c8b75dae31bea84bc26e2fa3f9e5d8b28e | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e9ee230a353353f327849d4623b25b4419711189 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/3068e221db92591a30b5ab2e9cb7fe4fd8e7e91d | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a1805e7f39d24d90128a936ef1088c3538746f7c | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/00d7fe77e4633a8bf3c55aca3e4448a43ccc679a | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f3a3a95082eaa9e7229ff19e54f26cbb696e8b2d | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16017208af2fa299c72a5243f621624f0e0c1022 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b58412465e0bef9b55fb6599d2b80a0a0edcb1e | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd462518160685c087349bc9b0d9585477a57070 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/860857d954eb7e7c4e7323641cd36bbf63cab6ee | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eb46556ebea4640ce5b2d5f13c48a7382bb54aca | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c5dbb3613d688879392da3aa5ccfcf5b8c87c32 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97373fd7e72dc83d465ce40e8d01a55079da8b31 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a80f253236c6ef7d9d7664704e1302881a6e11bc | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68b6818134906c39a8d8eff38851c20fca50a828 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6136bc8dedf80f8d3a4618897d32c1654d8d8d1d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a02e35fba0d8b6fc8507abfa6c6f2968f49d435 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6ba98660efa1c5a9192d130e3b9c608d8e566b17 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7796972d9a3d14cadb4297708a31d76888e2894 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4f981567334056eb45dc367767d85c7410fdf4ce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9692a9b510552ea69291722d7b64af76cd2b3cba | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/33241039319f9657f5591a5bc8ea9820260bbc0d | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e28ecc44a6ba5217d5b16c9f0e33fc7de84a83bd | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5267324b46e492f9a450996e5f461ac18dc10000 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/319fc544fc8061706ddab7e60920f3f62a57636e | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/16507741b4397d1ec76ee2afb67f782284057206 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/24f73b0be150d0582127c41223d75a17e266dd6f | armeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7a2efa520b5dafebaf5794cebf73dbd9cb286945 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/adbd85513e1e60dd7d8f04e074050146d04dd847 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bf263e4435e44b527f17cc643660ebfd25b3d4db | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9ccc5b1f41d3d2b1780c681a5e2841966d90ac74 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e09ed2d14e85dd8cc9395e071cce03de4a3e4757 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7a02428e280b88e6878df7d571044fed13586443 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12b5ae9cd7e8f6492f08f19e2e4d9e641b453162 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4a97fc4e098823b72a47d04711c7c1da9ab2f416 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ef3cdcc4752764789680f42c2122fbedb467e2f0 | mipsel | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/53e02d0b9e1f618844c92ec8d91b496c1687a134 | aarch64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/d6dd08e7e31ca4cb2254b61b60e474da1267ec6a | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c421aa32a989a6966836fbb3bfa9e2262a4d3c9b | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bead4eac6fb89b8e3e089a8ed6a86aa2573c258d | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3bda66355d76fc0e3ab173bc3d38c2f5f58d467f | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ea1cc47809954149c93a654d53249d3e8a351475 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/de3de41b2752f7225e9452f9e228965285373163 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cea5845a01220ca9be28195024d904a2a34633e | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e90b0412f30acb13fc8adc3107036b9d73e1fd22 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/363c2289f3e90d43f3de59c6607d2ee1058b508b | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e48486923d567b5142fc6c309cadb3166baf7ae1 | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/11e53148c82853d2b267957f94be0636fe5f347f | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/da2d68b112151251a847a9d5c078f9f370c43690 | microblazeel | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/571a6d4a034edec36c782bf7760b1a67020fa0e0 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/5b4ddb2b9d46914fa82b82ad09ee462cd86e6dd1 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1d69cbd70b2a0d6753ea9bbe3ebcc54e24fb11bb | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/8cb6fc3d0649a2ab8ff6af1d893a9db6e19496b4 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dee970ea342aaefadb9269bba95fe996c094e982 | x86_64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/23151232f4549e450adf408db0b06ef08f65423c | arc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/546f6b68dfe29892a2a2d16a4ca3196dcc79e535 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e45ba0c8fa179908359f82e3cf8cd0ec11dc0465 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8a203093638a1a23d9086b8a2ed1210e52b3b8e4 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/62e65bc2217398b6adab8b660f0c6ab7fde3489d | mips | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/85d400ffcff0f4dd32cdb3e052e11f16292d35b7 | arc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f511f98752da5c41104ec5ab9862861bad5aead3 | mips64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/3859c3fa3c6e0bc1394f510577b0340c81d5293e | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/da885d19e03298765f2e25898ccb62594f6862c5 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9e3e00194a2bbed54dbadd7183309828055edf38 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/274e1b6beb34d55ecf9d33134079e64cb4893a83 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cc7a89b67636c6105095f0b799d6e80447fe548b | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a66450f5e85dd3e6cddd65f1519b8f56cb7f4fb6 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ac2ab923e626ed51d489fcfbc3fc5c039fc32047 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/78071e629ecf793b2adf985d7b75d9bd168c8cef | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/df4c82a85508554e6b55a8c00863e73335075beb | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b00265219d49fbde77d4c74e351ff0313f4c55cb | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6221555ed2a15eee8658739d94bf323ba8a7906d | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a4f3f72ff2cdf4bd443e1a88c2861d66d3c3c1ee | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7eddea8181225408b1caab6cf0634025e500c47a | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/38b34c48f8fbc95f99bc9228e69362cd1d206ca9 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4ebd96a34888eb81c6b2ddb66284e9efacb77db0 | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2873934d8f1c36deac29504227edb9cda3c6e0f5 | ORPH mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7c92165b20847df534e41a569e4ef0d22854f11d | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/54f7f11ebfa6c83805194ac9dee20c65c941c847 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3010bdbd4b9ebcd312ed6aa30194138ad79bb7f2 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/53677095092355d9d7efd0b725e3fd376b4480fb | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/86c086f3f7590a8a3e4910ad0155e67929382cae | arc | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/d1a11e0dc63147fa1cc758c869a01e157ccfd014 | xtensa | kmod-29 | NOK | http://autobuild.buildroot.net/results/4b93d86e1f0304fe1a1165ca53d64fe00490213a | riscv64 | lapack-3.10.1 | NOK | http://autobuild.buildroot.net/results/b5e0068f8f63a22f024b1291fbac8d70f56c72db | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/4940c23d57ee0c8f0d0ee95fa6720bc4e05f97fa | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7a6fbe5590d375d0693865643c372a78922a0899 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a53e54b1d57d1fbb4f54920b32a4317c17d0552f | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3c0dbc048c3e77fa4204d060bc41d8b216986457 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f74081b84c1bd8ba72eeb9af612ba38303866448 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7f36a5be735f07921df4fd69201c02449edc592f | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5af203362c0befd72bcccba3d0344979ce661d4c | riscv32 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f21c99adf66c009255998b0edfae93715ccbdbf1 | sh4aeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8f7823fb13111c0ab79766445868e78cf2b8f429 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aeabff7a45ae55c52d3d4ab75e83b9078d7b91dd | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/8b6bc7c43aa626c9316566878ee5189c386edafb | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/7cd436023ed41e0f875433bed7c6eddfd3b30198 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/1f1693ab2763c5fef87d87dde2c41f477f59c352 | aarch64_be | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/783796bff28f92bf62ad80a72c1508dcd41611ed | arm | libgcrypt | TIM | http://autobuild.buildroot.net/results/70d57d1cab507ef17a0ef252b6a58bec7d0dbd05 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c13258ed09a5421437cb07ba50a04af41add17d7 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/fada00f14b03b899c473b5432d5a25436894bec6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b3998c92bed90d8dffcf832bd4de3460d4136c11 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d1e9afb13d96f679c4ed6a41e4496f3fbf9fb768 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0ebc1ae900ece7f797cf4622c95d82d90ced5b99 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a5844c479ad13b404383ca05318b5a23658398c2 | i686 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/369d5956f628fd89ceebb10c2391350d83ffb6bb | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/fc20ac64786179db1de61feb4a66af4ceff758ee | ORPH armeb | libmad-0.15.1b | NOK | http://autobuild.buildroot.net/results/98f93f2adf38428ac7d1f7c878f7de728da3afe1 | ORPH mipsel | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/663312a17a584ffb217ff8bb2330ed18e45ac218 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/300d3c5470999b3a23a7d52ab31ab2df06a1db83 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/958c94fd7ebd6b6384b52f2099d0d49885ae07ac | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c7e95e1987cb01f8b99ed4dc1c590291e4dee77d | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9f184a5dafa126508e3be5919155c117ef48a269 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a0a29443ee5d675875ce0f858464f085f330a3f6 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d46e93185da8ee00a4f78d7fd696d3a0cc08c8fe | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c8da3a0bca6d3e297f1f955d613547eb12de6c4f | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f0570078d0d60eec11677737ed87d027c1e1df7e | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/193b097c0c62f5cec269540c3693207df8f1a038 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/071be1b7bf7c0b1fbda0645ba1870d976a999e0a | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b2f4d24a7d0e606a1414f5d42680a6e5321562e3 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d0cd13fc9a0c2c79d53768841e6fd620a14b46b | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4e3dea3f3e6af5eb59c8747b144cf0039e040e31 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b8eec21e1f3c6c14f0e93325f9ab21bf5d51f798 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1ed284d10347c4d6063680623129f1fb2af17f4a | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1aa674cfe942ef3a1fb879d02d9505b9cc72a71a | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/216ca5ba3fba818f29d0efcb8945d4e052b4c05c | riscv64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1842058f5e98fce860be6922726d03cc50c543a7 | x86_64 | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/b77d52c8533b2c0cf172dcc6cb3fb7b36930c656 | i686 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/2a09958334e2dd16e22d3c659bfc37cbbf073c36 | ORPH arm | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/4d5bfba05afbb6ebad42ceb9b710a182a801e94c | ORPH aarch64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/343e7df635d7093fcf6fda06e4a6c8d7f20d5be3 | ORPH i586 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e9c001923975f10574880e5d36324f8e53e967a0 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/2e95dce5e7731fff57bb9ea12a4e894bbd17cf17 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/659ee776088da5f74a19cc9f1a559a04c0777bf1 | ORPH x86_64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6119ea5334d78adc6f6c85dd43f48caa09a91c9e | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a2b225d44c7326c412a333994ee48003c6b6f2a2 | ORPH armeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/166fb5d8206604bc0ad8b7513e6426f2efa2fdd7 | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/35955eaae3c562fe064405330e187c15e55e3b7d | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d8312c75d6f4ec97da24198bf3c3e152fee452e | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b885b29fb5672232a0e7451ebaf8d7f508eec093 | ORPH mipsel | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/be2f9568ac465df2a584496fcd92a1c8cc3216c6 | ORPH m68k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/d08042cdcdbe93855501d2ccb5c4e5987c9acec8 | m68k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/bf10c24553263dca2cb02695fc829f721dd0691a | arceb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/1936113ccc64eb92d71946e3e5afd8daa060acc5 | nios2 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/4c351e8f85d6ac1c8ff8746f616ce78f67a64670 | microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/11f071cd7dd443d7f6a6a3e9dca43fa078891bc0 | arm | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/e67808071b3855473cf6e5bc42b30d98f66d2786 | aarch64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4bf3049d0f3f7644c204e527f0ba2cba91b5e413 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/e63a7b7ea7ea6bb7632dc73691d97a3ccb08733f | aarch64_be | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/ef6aa8c6c5310ed8d5c0f3d76d2bc19bafdc37b9 | mipsel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/cc70f8164144f6a5375cfbfa1aa034d5f658de8c | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/2de3402f738c7cc0d37a5052bbaccc591ca0d0f3 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/d825843fb9e1763ad313cfa6442f1246be75c6d5 | ORPH sh4aeb | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/1ed8975f45b82457377e054e58f8876e265ae1df | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a193b91e5ceb106e78cb4778c2182b149b4aaefb | powerpc64le | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/0afa69c636ec2a568fe6b8a2715eea01b60752b3 | sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1afc5fab1f4ce58497cf538af61c72572b50a7bc | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/238ad270c610bd3a07858cde1cdf5fe5e99e9f9a | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/62b1f8dd7fcb7767ef6b20c1002581a47cd7349c | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c76f3cc4fb579182db0f687b2acc5a001b71322d | ORPH powerpc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/2cfb9dab7db36718d13bcdc2d478d7d8c1841d2e | ORPH microblazeel | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/325eaf50aa31b009c4b55542b742f611f8e8dc0e | ORPH aarch64_be | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/5cb7f85c1a8b7a2bad7b2ed6b6ecf2125df6c8b0 | riscv32 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/f561ac104fa3491fdfd9a597954cf5f0a191b5c2 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/8067e7870b1d8eb8640d09c4f5eadcb4d01fe21e | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c1bc731b9aac3fcdd58df163c261bff891717909 | arm | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/3992a1faa671492a3c64629f4352b1f2c9cc126a | microblaze | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/94d6df4cef7d5d01bfbe29ec12134790cfc9c8b9 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/052c4a07372e0018d42fd0b6b0e31bc196a8e918 | powerpc64le | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/1eeb096b0ae1092aa231655cd6cbf9b661551e2d | x86_64 | rsync-3.2.5 | NOK | http://autobuild.buildroot.net/results/9e6b69e146ef4ba6ec5ea93354f30dad01535605 | ORPH powerpc64 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/83153ed38a583ce2712df9b142ac3fc55a8413e3 | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/60ff1c7da93176ffc3de5878c104e35bda57c0a5 | or1k | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/5c80a688822f3098fcc06baa0dd5e45e6f745c44 | arceb | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/d547411c8d1e5ddaf964a05ee25752c48ef7a9a6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/792301e1858281d40b6822854b812a4e7146e0d1 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c178c8cc219da0ad5f090be0701ff76b3396af67 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/da969aae64993d6449ab5e3c0895ed58bf804739 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f257fed3cffd825c55c327c97c0f5c65f312b6d6 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e6b3534c65d5913b9c96a83e9e9c2b37742a3af6 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0699eb212420ecae0660cafe2d26f76dd997a4db | aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1f9b391906774c893574e68d2ddd5f0f3c0fbce2 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/19c6f9f833f71935b6691922ce94dc3ca8f05339 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/33c9cef36c033f7f5468326952639cde8b5fd848 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8d59beed1410bed08568b5fb520de2ae90b85c11 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4b8acf056ba1c57d6a160701a46e25578362275 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/eb01fd43c48de025b94f0715f9825b5ee2e9223f | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2ba7820aa8cf3407d51040e65dc635d7e5e778f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cd2620d687acee217d0e9f331b3faf6bf4e08ea9 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f0925a24b8edf501d432cf1de8bfb6de544d9d0b | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/567fa27ec558b65f3ff26616d5bb7ea1f111285f | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2fab4a9a9c4302c581481c57b44c2b9a03c87c42 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c40a211d81c70245fe276f752bd9cb4a698c4a9b | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d456e5ea98f870049529924aa65e74cb513d29df | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a9d96446362a8e3368a4ad366b3d55fc4fb7c353 | ORPH sparc | unknown | NOK | http://autobuild.buildroot.net/results/1e5bfbe5ac65087dd04666b103188bbdf508291f | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/218173e49f4b13ccaffd4197606c997a8964b2be | arm | unknown | NOK | http://autobuild.buildroot.net/results/4c27f228c5f533c231f82ebfa196184ed88118c7 | sparc | unknown | NOK | http://autobuild.buildroot.net/results/7e4fb7051500243d5e2d69cd1e23c66fb03f6b4c | arc | unknown | NOK | http://autobuild.buildroot.net/results/c5c51fdd93a7f6ae896a35560f7549700d649a91 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/3a5013ef3f43dc01d8f6a4dd89f764f6819839d0 | sparc | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/a84a46fff2ff0a09bce07b116e0db4d28a69e7af | mips64 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/e79dd4096b0778ba58228ad99733e6984b8ffd98 | ORPH nios2 | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/cab96ca279dc04677232acedc1dccd6519a10e60 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fd5943ec0dfd32f675d7f082f04b6bdf5307d913 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9e862761ceb8d20b32a3fa700ead9b6a8dcf51df | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bed7008ec341e6cf03af818e83b0cc89afe473d7 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b2a440198bed7b3be0c2e141911183dc19ebd514 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e9e8f9543f9416de5ccc4d4be384bce32a0191dc | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c25aaa34b341c999a7d3e79c59da8a2324f194c | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/37ad8bf425a4eb776933a3a4dcdf74e2e4a88a07 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/67cd92debed9ea17bd58ae675ef41ad190b1206d | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/452405c704cf3cd7de46602dbd67f3c9661b2c18 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c895415de2aece276e1252a48468e3f9eda8c59a | ORPH mips64el | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/ece3a94772f222f4c0fb8ae7fe80b7427df8058b | mipsel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/35a4a5728c25dc8d9b7a1915e6bb8a50f4501daf | Classification of failures by reason for 2022.02.x -------------------------------------------------- ulog-0389d243352255f6182326... | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/2b29be83ccd59fd0cc3f5ed89a0890cce729e650 | Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 4 igd2-for-linux-2.1 | 3 containerd-1.6.6 | 1 edk2-edk2-stable202102 | 1 gerbera-1.10.0 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 libnss-3.81 | 1 linux-5.10.109-cip5-rt4 | 1 s6-portable-utils-2.2.3.2 | 1 uclibc-1.0.42 | 1 wolfssl-5.5.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/e6a6c1059e06fd9262454afbe34e7d393b216cb3 | aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/a89b52ded8d0a3833639decc5a1cdda0ccc7e6ec | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/42b1892cb58ac63d15dc4fe0a69eb3be7affad5f | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ee28d0e2b48f21dd2b9878d7c4b17762be19c5 | x86_64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/755dd6404574ae12603dc21d832cf311addf5ff7 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e31694e75fe26b40d12199e42a5bcb852f2d5400 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5b019016e65b7af7f866325d0d1c11802b2ff89a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b629a4c781e80dd05655aab62f603ade8c5b7744 | aarch64 | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/5f9789ad3c8a8af2fdae3f0e7922d939e25847e1 | sparc64 | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/1bede0b3726bba251fe26ee44c062af11dd97c7b | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/230f11ef40d47732632aa0c8c4764e36efeb5a6b | ORPH riscv64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/6e23262199b227944a89140fdf3682ff9453ddda | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4d573fba08d62a22db92018e866af6054a124fad | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fcd4c25dc56d437fbc04cec7a830c2cba58b2291 | ORPH microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/9683911baa799c4bece351413d5512a51b8538fa | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/26719bf4a2a97932e723299fc4f3835f63a227f5 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3cc134d7ed1001454298e14c2fa0b8f512c519fb | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.2 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 20.0.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.2 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.66 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.66 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.66 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.8 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.7 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.2 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.3 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.1 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.19 | 20.10.20 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.11.2 | 2.12.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.19 | 20.10.20 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.34 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.3 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.2 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.20.0 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.1 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.1 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.5.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3.0 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.49.1 | 1.50.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-shark | DISTRO | https://release-monitoring.org/project/21854 | v0.7.5 | 0.8.0 | gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.1 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 72-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH igd2-for-linux | DISTRO | https://release-monitoring.org/project/21356 | 2.1 | 2.2 | imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-51 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.4 | 22.6.0 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.4 | 22.6.0 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.16-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.5 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.16 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libidn2 | DISTRO | https://release-monitoring.org/project/05597 | 2.3.3 | 2.3.4 | libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libminiupnpc | DISTRO | https://release-monitoring.org/project/01986 | 2.2.3 | 2.2.4 | libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | libzlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | ORPH lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lsof | DISTRO | https://release-monitoring.org/project/01844 | 4.96.3 | 4.96.4 | ORPH ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-lyaml | DISTRO | https://release-monitoring.org/project/11733 | 6.2.7 | 6.2.8 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.2 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.66 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.2 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.2 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minissdpd | DISTRO | https://release-monitoring.org/project/57838 | 1.5.20211105 | 1.6.0 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | minizip-zlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.5 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.42 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 1.0.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.219 | ORPH netcat-openbsd | DISTRO | https://release-monitoring.org/project/21534 | 1.218 | 1.219 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.2 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.2 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 19.0.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+20 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.66 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202210 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.43 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-path-tiny | DISTRO | https://release-monitoring.org/project/11962 | 0.124 | 0.130 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pixman | DISTRO | https://release-monitoring.org/project/03648 | 0.40.0 | 0.42.0 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.1 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.8 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.1.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.0 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.96 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.96 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-charset-normalizer | DISTRO | https://release-monitoring.org/project/55366 | 2.1.1 | 3.0.0 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.2 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-distro | DISTRO | https://release-monitoring.org/project/12202 | 1.7.0 | 1.8.0 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.8 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-jsonrpc | DISTRO | https://release-monitoring.org/project/21698 | 2.2.1 | 2.2.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.38.0 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3.post0 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.6 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 9.0.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.2 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.11.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.8 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.3 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220814.1 | 20220916.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pydyf | DISTRO | https://release-monitoring.org/project/179112 | 0.3.0 | 0.5.0 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.10 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.6.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytest-asyncio | DISTRO | https://release-monitoring.org/project/07273 | 0.19.0 | 0.20.1 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.5 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.3 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.10.1 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.2 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b2 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tinycss2 | DISTRO | https://release-monitoring.org/project/16655 | 1.1.1 | 1.2.1 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.5.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.2 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.2 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.7 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2210.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.1 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.2 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | sqlite | DISTRO | https://release-monitoring.org/project/04877 | 3.39.2 | 3.39.4 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.3 | 0.30.0 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.2 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0709 | 9.0.0814 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.1 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.231 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webkitgtk | DISTRO | https://release-monitoring.org/project/05355 | 2.38.0 | 2.38.1 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xfsinfo | DISTRO | https://release-monitoring.org/project/17158 | 1.0.6 | 1.0.7 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xcb-util-cursor | DISTRO | https://release-monitoring.org/project/05166 | 0.1.3 | 0.1.4 | xcb-util-image | DISTRO | https://release-monitoring.org/project/05167 | 0.4.0 | 0.4.1 | xcb-util-keysyms | DISTRO | https://release-monitoring.org/project/05168 | 0.4.0 | 0.4.1 | xcb-util-renderutil | DISTRO | https://release-monitoring.org/project/05169 | 0.3.9 | 0.3.10 | xcb-util-wm | DISTRO | https://release-monitoring.org/project/05170 | 0.4.1 | 0.4.2 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xerces | DISTRO | https://release-monitoring.org/project/05182 | 3.2.3 | 3.2.4 | ORPH xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXmu | DISTRO | https://release-monitoring.org/project/01785 | 1.1.3 | 1.1.4 | xlib_libXrender | DISTRO | https://release-monitoring.org/project/01789 | 0.9.10 | 0.9.11 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xlib_libxkbfile | DISTRO | https://release-monitoring.org/project/01781 | 1.1.0 | 1.1.1 | xlib_libxshmfence | DISTRO | https://release-monitoring.org/project/01792 | 1.3 | 1.3.1 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 374 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Mon Oct 24 05:47:40 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Mon, 24 Oct 2022 07:47:40 +0200 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture In-Reply-To: <20221011062647.741292-1-marcus.folkesson@gmail.com> References: <20221011062647.741292-1-marcus.folkesson@gmail.com> Message-ID: Bump Med v?nliga h?lsningar / Best regards Marcus Folkesson Den tis 11 okt. 2022 kl 08:26 skrev Marcus Folkesson < marcus.folkesson at gmail.com>: > libarchive is needed when building for s390x. > > Introduced in this patch: > c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify > initrd in SE case > > Fixes: > > http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ > > Signed-off-by: Marcus Folkesson > --- > package/libostree/Config.in | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/libostree/Config.in b/package/libostree/Config.in > index 14ae4da4c8..a36e12ddde 100644 > --- a/package/libostree/Config.in > +++ b/package/libostree/Config.in > @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE > # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() > depends on !BR2_TOOLCHAIN_USES_MUSL > select BR2_PACKAGE_E2FSPROGS > + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x > select BR2_PACKAGE_LIBGLIB2 > select BR2_PACKAGE_LIBGPG_ERROR > select BR2_PACKAGE_LIBGPGME > -- > 2.37.1 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at korsgaard.com Mon Oct 24 07:52:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 24 Oct 2022 09:52:53 +0200 Subject: [Buildroot] [PATCH] package/wireguard-linux-compat: bump version to 1.0.20220627 Message-ID: <20221024075253.3228016-1-peter@korsgaard.com> For details, see the announcement: https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html Signed-off-by: Peter Korsgaard --- package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.hash b/package/wireguard-linux-compat/wireguard-linux-compat.hash index 3072b66e92..0f5713fc34 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.hash +++ b/package/wireguard-linux-compat/wireguard-linux-compat.hash @@ -1,4 +1,4 @@ -# https://lists.zx2c4.com/pipermail/wireguard/2021-December/007369.html -sha256 c0e607138a17daac656f508d8e63ea3737b5221fa5d9288191ddeb099f5a3b92 wireguard-linux-compat-1.0.20211208.tar.xz +# https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html +sha256 362d412693c8fe82de00283435818d5c5def7f15e2433a07a9fe99d0518f63c0 wireguard-linux-compat-1.0.20220627.tar.xz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.mk b/package/wireguard-linux-compat/wireguard-linux-compat.mk index 44cc30f36e..258e184765 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.mk +++ b/package/wireguard-linux-compat/wireguard-linux-compat.mk @@ -4,7 +4,7 @@ # ################################################################################ -WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20211208 +WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20220627 WIREGUARD_LINUX_COMPAT_SITE = https://git.zx2c4.com/wireguard-linux-compat/snapshot WIREGUARD_LINUX_COMPAT_SOURCE = wireguard-linux-compat-$(WIREGUARD_LINUX_COMPAT_VERSION).tar.xz WIREGUARD_LINUX_COMPAT_LICENSE = GPL-2.0 -- 2.30.2 From sebastien.szymanski at armadeus.com Mon Oct 24 08:27:19 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Mon, 24 Oct 2022 10:27:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools -- 2.37.4 From moritz at h6t.eu Mon Oct 24 09:15:12 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Mon, 24 Oct 2022 11:15:12 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: Am 22.10.22 um 00:57 schrieb James Hilliard: > On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: >> >> Am 21.10.22 um 18:41 schrieb James Hilliard: >>> On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: >>>> >>>> Am 20.10.22 um 00:12 schrieb James Hilliard: >>>> >>>>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot >>>>> wrote: >>>>>> From: Moritz Bitsch >>>>>> >>>>>> The cargo --release flag is used to create optimized builds, not supplying >>>>>> --release has major performance implications. > > Looking at this further the cargo --release flag merely tells cargo to use the > release profile rather than the dev profile, however the issue of optimizations > being enabled or not is really a matter of what the profile configuration is, > right now we are effectively choosing between the default release or default > dev profile configuration which does not properly match the build settings. > > Instead what we really want to do is configure all cargo profiles based on the > selected buildroot build settings. > > Unfortunately cargo doesn't have any env variable that selects a profile, but > we can sidestep this simply by configuring both root profiles(which other > profiles inherit from). > > I think the existing cargo build flags are fine, I sent a patch which should fix > the profile configurations so that they match the buildroot build settings, let > me know if this fixes the optimization issue for you: > https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ Thanks, for the detailed response. The mentioned patch works fine for my use case. I can reproduce the performance issue/improvement when switching between different optimization levels. >>>>> Is there an env variable we can use to set this instead? >>>>> >>>>> Some packages use cargo without the cargo infrastructure, for example >>>>> we have a number of pyo3(https://pyo3.rs/) based packages that use the >>>>> cargo env but not the cargo build commands from here. >>>> I could not find any env variable for switching profiles. >>>> >>>> I had a look at python-rtoml, and the used setuptools-rust: supplying >>>> --debug to >>>> the "setup.py build" removes the --release flag from the cargo invocation. >>> >>> Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, >>> we also have maturin which is pep517 based. >> >> I'm in no way a a python expert, so take my words with a grain of salt. >> >> I could not find a way to specify what build profile is used by maturin >> when in a pep517 build. Even if maturin supports the -r flag for release >> builds when called directly. > > I think the real issue is actually not that the wrong build profile is > being used > so much as the build profile configuration itself is wrong. After looking into some crates with different behavior when built in debug or release mode (for example rust-embed) I think that most of them check for enabled debug_assertions, which you handle in your patch. I think the conditional --release switch should be removed. Your patch is by far the more precise solution. >> >>> >>>>>> Signed-off-by: Moritz Bitsch >>>>>> --- >>>>>> package/pkg-cargo.mk | 2 +- >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >>>>>> index f7e3f39503..e0556252fa 100644 >>>>>> --- a/package/pkg-cargo.mk >>>>>> +++ b/package/pkg-cargo.mk >>>>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >>>>>> $$($(2)_CARGO_ENV) \ >>>>>> cargo build \ >>>>>> --offline \ >>>>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >>>>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >>>>>> --manifest-path Cargo.toml \ >>>>>> --locked \ >>>>>> $$($(2)_CARGO_BUILD_OPTS) >>>>>> -- >>>>>> 2.37.3 >>>>>> >>>>>> _______________________________________________ >>>>>> buildroot mailing list >>>>>> buildroot at buildroot.org >>>>>> https://lists.buildroot.org/mailman/listinfo/buildroot From fperrad at gmail.com Mon Oct 24 10:41:33 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:33 +0200 Subject: [Buildroot] [PATCH] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Message-ID: <20221024104133.1470655-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig index e325184e9..1bb628b56 100644 --- a/configs/olimex_a20_olinuxino_lime2_defconfig +++ b/configs/olimex_a20_olinuxino_lime2_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig index ba814b98b..7105ea996 100644 --- a/configs/olimex_a20_olinuxino_lime_defconfig +++ b/configs/olimex_a20_olinuxino_lime_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y -- 2.37.2 From fperrad at gmail.com Mon Oct 24 10:41:42 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:42 +0200 Subject: [Buildroot] [PATCH] configs/mx6cubox: bump Linux and U-Boot versions Message-ID: <20221024104142.1470677-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- configs/mx6cubox_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig index 86f506ef0..cbd937806 100644 --- a/configs/mx6cubox_defconfig +++ b/configs/mx6cubox_defconfig @@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15" @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi" BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y -- 2.37.2 From fperrad at gmail.com Mon Oct 24 10:41:50 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:50 +0200 Subject: [Buildroot] [PATCH] package/sqlite: bump to version 3.39.4 Message-ID: <20221024104150.1470698-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/sqlite/sqlite.hash | 2 +- package/sqlite/sqlite.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sqlite/sqlite.hash b/package/sqlite/sqlite.hash index d5af2297f..936f42e8e 100644 --- a/package/sqlite/sqlite.hash +++ b/package/sqlite/sqlite.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 852be8a6183a17ba47cee0bbff7400b7aa5affd283bf3beefc34fcd088a239de sqlite-autoconf-3390200.tar.gz +sha256 f31d445b48e67e284cf206717cc170ab63cbe4fd7f79a82793b772285e78fdbb sqlite-autoconf-3390400.tar.gz sha256 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9 tea/license.terms diff --git a/package/sqlite/sqlite.mk b/package/sqlite/sqlite.mk index 01dbb153b..4f4164c37 100644 --- a/package/sqlite/sqlite.mk +++ b/package/sqlite/sqlite.mk @@ -4,8 +4,8 @@ # ################################################################################ -SQLITE_VERSION = 3.39.2 -SQLITE_TAR_VERSION = 3390200 +SQLITE_VERSION = 3.39.4 +SQLITE_TAR_VERSION = 3390400 SQLITE_SOURCE = sqlite-autoconf-$(SQLITE_TAR_VERSION).tar.gz SQLITE_SITE = https://www.sqlite.org/2022 SQLITE_LICENSE = Public domain -- 2.37.2 From neal.frager at amd.com Mon Oct 24 14:22:14 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:14 -0600 Subject: [Buildroot] [PATCH v1 1/3] add package/versal-firmware Message-ID: <20221024142216.31273-1-neal.frager@amd.com> This patch adds support for downloading versal microblaze firmware binaries. These are necessary for booting Xilinx versal devices. The location of these binaries is temporary, and will soon be added to the Xilinx firmware repository. The temporary location is using the same free distribution license as the Xilinx firmware repository. Once these files are available on the Xilinx repository, this package will be updated to the new location. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in | 1 + package/versal-firmware/Config.in | 22 ++++++++++++++++++ package/versal-firmware/versal-firmware.hash | 3 +++ package/versal-firmware/versal-firmware.mk | 24 ++++++++++++++++++++ 5 files changed, 51 insertions(+) create mode 100644 package/versal-firmware/Config.in create mode 100644 package/versal-firmware/versal-firmware.hash create mode 100644 package/versal-firmware/versal-firmware.mk diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..ed696f4cd0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2176,6 +2176,7 @@ F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig F: package/bootgen +F: package/versal-firmware N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..0abf233940 100644 --- a/package/Config.in +++ b/package/Config.in @@ -441,6 +441,7 @@ menu "Firmware" source "package/sunxi-boards/Config.in" source "package/ts4900-fpga/Config.in" source "package/ux500-firmware/Config.in" + source "package/versal-firmware/Config.in" source "package/wilc-firmware/Config.in" source "package/wilink-bt-firmware/Config.in" source "package/zd1211-firmware/Config.in" diff --git a/package/versal-firmware/Config.in b/package/versal-firmware/Config.in new file mode 100644 index 0000000000..e184ba1925 --- /dev/null +++ b/package/versal-firmware/Config.in @@ -0,0 +1,22 @@ +config BR2_PACKAGE_VERSAL_FIRMWARE + bool "versal-firmware" + depends on BR2_aarch64 + help + Pre-built firmware files for Xilinx Versal boards. + + https://github.com/nealfrager/buildroot-firmware + +if BR2_PACKAGE_VERSAL_FIRMWARE + +config BR2_PACKAGE_VERSAL_FIRMWARE_VERSION + string "versal firmware version" + help + Release version of Versal firmware. + +config BR2_PACKAGE_VERSAL_FIRMWARE_BOARD + string "versal board name" + help + Name of Versal target board. + Used for installing the appropriate firmware boot.bin. + +endif # BR2_PACKAGE_VERSAL_FIRMWARE diff --git a/package/versal-firmware/versal-firmware.hash b/package/versal-firmware/versal-firmware.hash new file mode 100644 index 0000000000..7a8ea04c91 --- /dev/null +++ b/package/versal-firmware/versal-firmware.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 14c505cac0216637ab2d08590acffb4861446e480bdbf7417e699816048ab39b versal-firmware-v2022.2.tar.gz +sha256 f9796efcd98f47fb3e1d5d4c23e224613e91c70207b759a2087de368be50c315 LICENSE diff --git a/package/versal-firmware/versal-firmware.mk b/package/versal-firmware/versal-firmware.mk new file mode 100644 index 0000000000..35dfbaa512 --- /dev/null +++ b/package/versal-firmware/versal-firmware.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# versal-firmware +# +################################################################################ + +VERSAL_FIRMWARE_VERSION = $(call qstrip,$(BR2_PACKAGE_VERSAL_FIRMWARE_VERSION)) +VERSAL_FIRMWARE_SITE = $(call github,nealfrager,buildroot-firmware,$(BR2_PACKAGE_VERSAL_FIRMWARE_VERSION)) +VERSAL_FIRMWARE_LICENSE = Xilinx-Binary-Only +VERSAL_FIRMWARE_LICENSE_FILES = LICENSE + +VERSAL_FIRMWARE_INSTALL_TARGET = NO +VERSAL_FIRMWARE_INSTALL_IMAGES = YES + +define VERSAL_FIRMWARE_INSTALL_IMAGES_CMDS + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_plm.elf \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_plm.elf + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_psmfw.elf \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_psmfw.elf + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_vpl_gen_fixed.pdi \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_vpl_gen_fixed.pdi +endef + +$(eval $(generic-package)) -- 2.17.1 From neal.frager at amd.com Mon Oct 24 14:22:15 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:15 -0600 Subject: [Buildroot] [PATCH v1 2/3] add board/versal In-Reply-To: <20221024142216.31273-1-neal.frager@amd.com> References: <20221024142216.31273-1-neal.frager@amd.com> Message-ID: <20221024142216.31273-2-neal.frager@amd.com> This patch adds board support for generating images for versal boards. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + board/versal/genimage.cfg | 30 +++++++++++++++++ board/versal/post-build.sh | 16 +++++++++ board/versal/post-image.sh | 35 +++++++++++++++++++ board/versal/readme.txt | 54 ++++++++++++++++++++++++++++++ board/versal/vck190/uboot.fragment | 1 + 6 files changed, 137 insertions(+) create mode 100644 board/versal/genimage.cfg create mode 100755 board/versal/post-build.sh create mode 100755 board/versal/post-image.sh create mode 100644 board/versal/readme.txt create mode 100644 board/versal/vck190/uboot.fragment diff --git a/DEVELOPERS b/DEVELOPERS index ed696f4cd0..08095c9702 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2168,6 +2168,7 @@ F: package/pkg-qmake.mk F: package/qt5/qt5opcua/ N: Neal Frager +F: board/versal/ F: board/zynq/ F: board/zynqmp/ F: board/zynqmp/kria/ diff --git a/board/versal/genimage.cfg b/board/versal/genimage.cfg new file mode 100644 index 0000000000..d994d3a2bf --- /dev/null +++ b/board/versal/genimage.cfg @@ -0,0 +1,30 @@ +image boot.vfat { + vfat { + files = { + "boot.bin", + "system.dtb", + "Image" + } + file extlinux/extlinux.conf { + image = extlinux.conf + } + } + + size = 32M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/versal/post-build.sh b/board/versal/post-build.sh new file mode 100755 index 0000000000..0713bd1b05 --- /dev/null +++ b/board/versal/post-build.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +# genimage will need to find the extlinux.conf +# in the binaries directory + +BOARD_DIR="$(dirname $0)" +CONSOLE=$2 +ROOT=$3 + +mkdir -p "${BINARIES_DIR}" +cat <<-__HEADER_EOF > "${BINARIES_DIR}/extlinux.conf" + label linux + kernel /Image + devicetree /system.dtb + append console=${CONSOLE} root=/dev/${ROOT} rw rootwait + __HEADER_EOF diff --git a/board/versal/post-image.sh b/board/versal/post-image.sh new file mode 100755 index 0000000000..aad6813052 --- /dev/null +++ b/board/versal/post-image.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +# By default U-Boot loads DTB from a file named "system.dtb", so +# let's use a symlink with that name that points to the *first* +# devicetree listed in the config. + +FIRST_DT=$(sed -nr \ + -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/([-_/[:alnum:]\\.]*).*"$|\1|p' \ + ${BR2_CONFIG}) + +[ -z "${FIRST_DT}" ] || ln -fs ${FIRST_DT}.dtb ${BINARIES_DIR}/system.dtb + +BOARD_DIR="$(dirname $0)" +BOARD_NAME=$4 + +mkdir -p "${BINARIES_DIR}" +cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif" + the_ROM_image: + { + image { + { type=bootimage, file=${BINARIES_DIR}/${BOARD_NAME}_vpl_gen_fixed.pdi } + { type=bootloader, file=${BINARIES_DIR}/${BOARD_NAME}_plm.elf } + { core=psm, file=${BINARIES_DIR}/${BOARD_NAME}_psmfw.elf } + } + image { + id = 0x1c000000, name=apu_subsystem + { type=raw, load=0x00001000, file=${BINARIES_DIR}/system.dtb } + { core=a72-0, exception_level=el-3, trustzone, file=${BINARIES_DIR}/bl31.elf } + { core=a72-0, exception_level=el-2, file=${BINARIES_DIR}/u-boot } + } + } + __HEADER_EOF + +${HOST_DIR}/bin/bootgen -arch versal -image ${BINARIES_DIR}/bootgen.bif -o ${BINARIES_DIR}/boot.bin -w on +support/scripts/genimage.sh -c ${BOARD_DIR}/genimage.cfg diff --git a/board/versal/readme.txt b/board/versal/readme.txt new file mode 100644 index 0000000000..9f234be620 --- /dev/null +++ b/board/versal/readme.txt @@ -0,0 +1,54 @@ +****************************************** +Xilinx VCK190 board - Versal +****************************************** + +This document describes the Buildroot support for the VCK190 +board by Xilinx, based on Versal. It has been tested with the +VCK190 production board. + +Evaluation board features can be found here with the link below. + +VCK190: +https://www.xilinx.com/products/boards-and-kits/vck190.html + + +How to build it +=============== + +Configure Buildroot: + + $ make versal_vck190_defconfig + +Compile everything and build the rootfs image: + + $ make + +Result of the build +------------------- + +After building, you should get a tree like this: + + output/images/ + +-- boot.bin + +-- boot.vfat + +-- Image + +-- rootfs.ext2 + +-- rootfs.ext4 -> rootfs.ext2 + +-- sdcard.img + +-- system.dtb -> versal-vck190-rev1.1.dtb + `-- versal-vck190-rev1.1.dtb + +How to write the SD card +======================== + +WARNING! This will destroy all the card content. Use with care! + +The sdcard.img file is a complete bootable image ready to be written +on the boot medium. To install it, simply copy the image to an SD +card: + + # dd if=output/images/sdcard.img of=/dev/sdX + +Where 'sdX' is the device node of the SD. + +Eject the SD card, insert it in the board, and power it up. diff --git a/board/versal/vck190/uboot.fragment b/board/versal/vck190/uboot.fragment new file mode 100644 index 0000000000..961c4239bd --- /dev/null +++ b/board/versal/vck190/uboot.fragment @@ -0,0 +1 @@ +CONFIG_DEFAULT_DEVICE_TREE="versal-vck190-rev1.1" -- 2.17.1 From neal.frager at amd.com Mon Oct 24 14:22:16 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:16 -0600 Subject: [Buildroot] [PATCH v1 3/3] add configs/versal_vck190_defconfig In-Reply-To: <20221024142216.31273-1-neal.frager@amd.com> References: <20221024142216.31273-1-neal.frager@amd.com> Message-ID: <20221024142216.31273-3-neal.frager@amd.com> This patch adds support for Xilinx Versal VCK190 evaluation board. VCK190 features can be found here: https://www.xilinx.com/products/boards-and-kits/vck190.html The VCK190 is based on the Xilinx Versal family: https://www.xilinx.com/products/silicon-devices/acap/versal.html The VC1902 included with the VCK190 evaluation board has Xilinx AI Engine acclerators designed for accelerating machine learning applications. Also included is an upgrade from prior Zynq and ZynqMP families to ARM Cortex-A72 cores. While the Linux kernel for Versal is quite similar to ZynqMP, the boot process has significantly changed. Triple-redundant MicroBlaze cores are used to boot and setup Versal devices. For this reason, current buildroot support will download pre-built firmware images and use Xilinx bootgen to generate the boot.bin for the vck190. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + configs/versal_vck190_defconfig | 37 +++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 configs/versal_vck190_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 08095c9702..4634a957ae 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2172,6 +2172,7 @@ F: board/versal/ F: board/zynq/ F: board/zynqmp/ F: board/zynqmp/kria/ +F: configs/versal_vck190_defconfig F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig new file mode 100644 index 0000000000..d80dac8f4f --- /dev/null +++ b/configs/versal_vck190_defconfig @@ -0,0 +1,37 @@ +BR2_aarch64=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2 vck190" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx_versal" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vck190-rev1.1" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.6_2022.2)/xlnx_rebase_v2.6_2022.2.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/versal/vck190/uboot.fragment" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_ELF=y +BR2_PACKAGE_VERSAL_FIRMWARE=y +BR2_PACKAGE_VERSAL_FIRMWARE_VERSION="v2022.2" +BR2_PACKAGE_VERSAL_FIRMWARE_BOARD="vck190" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_BOOTGEN=y -- 2.17.1 From james.hilliard1 at gmail.com Mon Oct 24 16:38:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 24 Oct 2022 12:38:13 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: On Mon, Oct 24, 2022 at 5:15 AM Moritz Bitsch wrote: > > Am 22.10.22 um 00:57 schrieb James Hilliard: > > On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: > >> > >> Am 21.10.22 um 18:41 schrieb James Hilliard: > >>> On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > >>>> > >>>> Am 20.10.22 um 00:12 schrieb James Hilliard: > >>>> > >>>>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > >>>>> wrote: > >>>>>> From: Moritz Bitsch > >>>>>> > >>>>>> The cargo --release flag is used to create optimized builds, not supplying > >>>>>> --release has major performance implications. > > > > Looking at this further the cargo --release flag merely tells cargo to use the > > release profile rather than the dev profile, however the issue of optimizations > > being enabled or not is really a matter of what the profile configuration is, > > right now we are effectively choosing between the default release or default > > dev profile configuration which does not properly match the build settings. > > > > Instead what we really want to do is configure all cargo profiles based on the > > selected buildroot build settings. > > > > Unfortunately cargo doesn't have any env variable that selects a profile, but > > we can sidestep this simply by configuring both root profiles(which other > > profiles inherit from). > > > > I think the existing cargo build flags are fine, I sent a patch which should fix > > the profile configurations so that they match the buildroot build settings, let > > me know if this fixes the optimization issue for you: > > https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ > > Thanks, for the detailed response. The mentioned patch works fine for my > use case. I can reproduce the performance issue/improvement when > switching between different optimization levels. Great, can you reply to that patch with a "Tested-by:" so that patchwork picks it up? > > >>>>> Is there an env variable we can use to set this instead? > >>>>> > >>>>> Some packages use cargo without the cargo infrastructure, for example > >>>>> we have a number of pyo3(https://pyo3.rs/) based packages that use the > >>>>> cargo env but not the cargo build commands from here. > >>>> I could not find any env variable for switching profiles. > >>>> > >>>> I had a look at python-rtoml, and the used setuptools-rust: supplying > >>>> --debug to > >>>> the "setup.py build" removes the --release flag from the cargo invocation. > >>> > >>> Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > >>> we also have maturin which is pep517 based. > >> > >> I'm in no way a a python expert, so take my words with a grain of salt. > >> > >> I could not find a way to specify what build profile is used by maturin > >> when in a pep517 build. Even if maturin supports the -r flag for release > >> builds when called directly. > > > > I think the real issue is actually not that the wrong build profile is > > being used > > so much as the build profile configuration itself is wrong. > > After looking into some crates with different behavior when built in > debug or release mode (for example rust-embed) I think that most of them > check for enabled debug_assertions, which you handle in your patch. There are still ways for cargo packages to potentially change behavior based on the selected profile even when the profile configurations are otherwise identical. > > I think the conditional --release switch should be removed. Your patch > is by far the more precise solution. I think we should probably still leave the --release switch as it's possible for cargo package build scripts to detect the configured profile using the PROFILE build script env variable which gets set by cargo: https://doc.rust-lang.org/cargo/reference/environment-variables.html#environment-variables-cargo-sets-for-build-scripts There's probably not many cases where this will matter but it does appear to be more correct to set the --release switch as well when possible. > > >> > >>> > >>>>>> Signed-off-by: Moritz Bitsch > >>>>>> --- > >>>>>> package/pkg-cargo.mk | 2 +- > >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>>>> > >>>>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >>>>>> index f7e3f39503..e0556252fa 100644 > >>>>>> --- a/package/pkg-cargo.mk > >>>>>> +++ b/package/pkg-cargo.mk > >>>>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >>>>>> $$($(2)_CARGO_ENV) \ > >>>>>> cargo build \ > >>>>>> --offline \ > >>>>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >>>>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >>>>>> --manifest-path Cargo.toml \ > >>>>>> --locked \ > >>>>>> $$($(2)_CARGO_BUILD_OPTS) > >>>>>> -- > >>>>>> 2.37.3 > >>>>>> > >>>>>> _______________________________________________ > >>>>>> buildroot mailing list > >>>>>> buildroot at buildroot.org > >>>>>> https://lists.buildroot.org/mailman/listinfo/buildroot From moritz at h6t.eu Mon Oct 24 17:43:09 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Mon, 24 Oct 2022 19:43:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo: configure cargo profiles In-Reply-To: <20221021224448.3502942-1-james.hilliard1@gmail.com> References: <20221021224448.3502942-1-james.hilliard1@gmail.com> Message-ID: <4441102a-7b71-a4cf-9a9f-8122ebeaeb9b@h6t.eu> Am 22.10.22 um 00:44 schrieb James Hilliard: > The cargo profile flags currently only select a cargo build flag which > does not accurately reflect the configured build settings, setting the > cargo build flag also only works for packages using the cargo > infrastructure directly and not with other packages using the cargo > environment such as pyo3 based python packages(which indirectly invoke > cargo build via the setuptools-rust and maturn python build backends). > > To ensure that cargo uses the correct profile settings for the build > we need to set env variables for the two root profiles(dev/release) > based on the buildroot build settings. > > For reference the default cargo root profile settings are: > https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles > > As applications not using cargo infrastructure do not have a standard > way of configuring a specific build profile due to the selected > profile being determined by the cargo command line flags, the only > reliable way to configure profile settings is to set both root > profiles in the environment as this will ensure that they are used > regardless of which cargo build flag(such as --debug or --release) is > used. > > Cc: Moritz Bitsch > Signed-off-by: James Hilliard Tested-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 100 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..4945770079 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -46,6 +46,106 @@ PKG_CARGO_ENV = \ > CARGO_BUILD_TARGET="$(RUSTC_TARGET_NAME)" \ > CARGO_TARGET_$(call UPPERCASE,$(RUSTC_TARGET_NAME))_LINKER=$(notdir $(TARGET_CROSS))gcc > > +# We always set both CARGO_PROFILE_DEV and CARGO_PROFILE_RELEASE > +# as we are unable to select a build profile using the environment. > +# > +# Other cargo profiles generally derive from these two profiles. > + > +# Disable incremental compilation to match release default. > +# > +# Set codegen-units to release default. > +# > +# Set split-debuginfo to default off for ELF platforms. > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_INCREMENTAL="false" \ > + CARGO_PROFILE_RELEASE_INCREMENTAL="false" \ > + CARGO_PROFILE_DEV_CODEGEN_UNITS="16" \ > + CARGO_PROFILE_RELEASE_CODEGEN_UNITS="16" \ > + CARGO_PROFILE_DEV_SPLIT_DEBUGINFO="off" \ > + CARGO_PROFILE_RELEASE_SPLIT_DEBUGINFO="off" > + > +# Set the optimization level with the release default as fallback. > +ifeq ($(BR2_OPTIMIZE_0),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" > +else ifeq ($(BR2_OPTIMIZE_1),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="1" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="1" > +else ifeq ($(BR2_OPTIMIZE_2),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="2" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="2" > +else ifeq ($(BR2_OPTIMIZE_3),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +else ifeq ($(BR2_OPTIMIZE_G),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" > +else ifeq ($(BR2_OPTIMIZE_S),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="s" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="s" > +else ifeq ($(BR2_OPTIMIZE_FAST),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +endif > + > +ifeq ($(BR2_ENABLE_LTO),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_LTO="true" \ > + CARGO_PROFILE_RELEASE_LTO="true" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_LTO="false" \ > + CARGO_PROFILE_RELEASE_LTO="false" > +endif > + > + > +ifeq ($(BR2_ENABLE_DEBUG),y) > +ifeq ($(BR2_DEBUG_3),y) > +# full debug info > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="2" \ > + CARGO_PROFILE_RELEASE_DEBUG="2" > +else > +# line tables only > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="1" \ > + CARGO_PROFILE_RELEASE_DEBUG="1" > +endif > +else > +# no debug info > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="0" \ > + CARGO_PROFILE_RELEASE_DEBUG="0" > +endif > + > +# Enabling debug-assertions enables the runtime debug_assert! macro. > +# > +# Enabling overflow-checks enables runtime panic on integer overflow. > +ifeq ($(BR2_ENABLE_RUNTIME_DEBUG),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="true" \ > + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="true" \ > + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="true" \ > + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="true" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="false" \ > + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="false" \ > + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="false" \ > + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="false" > +endif > + > # > # This is a workaround for https://github.com/rust-lang/compiler-builtins/issues/420 > # and should be removed when fixed upstream From Alexey.Brodkin at synopsys.com Mon Oct 24 17:49:11 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Mon, 24 Oct 2022 19:49:11 +0200 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS Message-ID: <20221024174911.75444-1-abrodkin@synopsys.com> In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") we opted-out from unconditional linking with "-latomic" and made it a conditional based on real availability of __atomic_fetch_and_1() in the toolchain. I.e. for many targets "-latomic" was not used any longer. And in those supposedly rare cases when libatomic was required it was all OK until there's a LD_LIBRARY_PATH set with something where yet another libatomic.so instance exists, especially if that's the one from host (in my case I used a separately built host toolchain). Then we see: ---------------------->8----------------------- /bin/sh ./libtool --tag=CC --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o -latomic libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format collect2: error: ld returned 1 exit status ---------------------->8----------------------- That happens because libtool of numactl adds contents of the aforementioned LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it finds becomes the one used for linking. What's more our precios cross-built libatomic.so never even gets considered because that first found libatomic.so is used with full path, not as "-latomic" as otherwise it would have been used without helpful libtool. But with paths pointing to the staging location, these paths get added to "$searchdirs" and so the right libatomic.so gets found, which solves our problem. Signed-off-by: Alexey Brodkin --- package/numactl/numactl.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..58b304d6e1 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -10,6 +10,7 @@ NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = README.md NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES -NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ + LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" $(eval $(autotools-package)) -- 2.16.2 From ju.o at free.fr Mon Oct 24 19:54:36 2022 From: ju.o at free.fr (Julien Olivain) Date: Mon, 24 Oct 2022 21:54:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-distro: bump to version 1.8.0 Message-ID: <20221024195436.409490-1-ju.o@free.fr> Also adds md5 file hash published on: https://pypi.org/pypi/distro/json For change log since 1.7.0, see: https://github.com/python-distro/distro/releases/tag/v1.8.0 Most notable change is the upstream support for Buildroot (included in python module docs and tests). Signed-off-by: Julien Olivain --- Tested on commit bd6e792 with commands: make check-package ... 0 warnings generated support/testing/run-tests \ -d dl \ -o output_folder \ tests.package.test_python_distro.TestPythonPy3Distro ... OK --- package/python-distro/python-distro.hash | 4 +++- package/python-distro/python-distro.mk | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/package/python-distro/python-distro.hash b/package/python-distro/python-distro.hash index 8f09197156..3d3e4258de 100644 --- a/package/python-distro/python-distro.hash +++ b/package/python-distro/python-distro.hash @@ -1,3 +1,5 @@ +# From https://pypi.org/pypi/distro/json +md5 a1e81972bbcfc0dc77dd0cde590c22a6 distro-1.8.0.tar.gz +sha256 02e111d1dc6a50abb8eed6bf31c3e48ed8b0830d1ea2a1b78c61765c2513fdd8 distro-1.8.0.tar.gz # Locally computed -sha256 151aeccf60c216402932b52e40ee477a939f8d58898927378a02abbe852c1c39 distro-1.7.0.tar.gz sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-distro/python-distro.mk b/package/python-distro/python-distro.mk index c69849b7ac..e079d8e265 100644 --- a/package/python-distro/python-distro.mk +++ b/package/python-distro/python-distro.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DISTRO_VERSION = 1.7.0 -PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/b5/7e/ddfbd640ac9a82e60718558a3de7d5988a7d4648385cf00318f60a8b073a +PYTHON_DISTRO_VERSION = 1.8.0 +PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/4b/89/eaa3a3587ebf8bed93e45aa79be8c2af77d50790d15b53f6dfc85b57f398 PYTHON_DISTRO_SOURCE = distro-$(PYTHON_DISTRO_VERSION).tar.gz PYTHON_DISTRO_LICENSE = Apache-2.0 PYTHON_DISTRO_LICENSE_FILES = LICENSE -- 2.38.1 From james.hilliard1 at gmail.com Mon Oct 24 20:04:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 24 Oct 2022 14:04:06 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-daemon: bump to version 2.3.2 Message-ID: <20221024200406.2266871-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-daemon/python-daemon.hash | 4 ++-- package/python-daemon/python-daemon.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-daemon/python-daemon.hash b/package/python-daemon/python-daemon.hash index 4f53902d3f..005a969207 100644 --- a/package/python-daemon/python-daemon.hash +++ b/package/python-daemon/python-daemon.hash @@ -1,6 +1,6 @@ # md5, sha256 https://pypi.org/pypi/python-daemon/json -md5 3ab10a93472201214cd95c05f1923af6 python-daemon-2.2.3.tar.gz -sha256 affeca9e5adfce2666a63890af9d6aff79f670f7511899edaddca7f96593cc25 python-daemon-2.2.3.tar.gz +md5 b7397fe73d516dc14921500a1245b41c python-daemon-2.3.2.tar.gz +sha256 3deeb808e72b6b89f98611889e11cc33754f5b2c1517ecfa1aaf25f402051fb5 python-daemon-2.3.2.tar.gz # Locally computed sha256 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE.ASF-2 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL-3 diff --git a/package/python-daemon/python-daemon.mk b/package/python-daemon/python-daemon.mk index 600ccf5bf1..aa8019f4be 100644 --- a/package/python-daemon/python-daemon.mk +++ b/package/python-daemon/python-daemon.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DAEMON_VERSION = 2.2.3 -PYTHON_DAEMON_SITE = https://pypi.python.org/packages/source/p/python-daemon +PYTHON_DAEMON_VERSION = 2.3.2 +PYTHON_DAEMON_SITE = https://files.pythonhosted.org/packages/d9/3c/727b06abb46fead341a2bdad04ba4a4db5395c44c45d8ba0aa82b517e462 PYTHON_DAEMON_LICENSE = Apache-2.0 (library), GPL-3.0+ (test, build) PYTHON_DAEMON_LICENSE_FILES = LICENSE.ASF-2 LICENSE.GPL-3 PYTHON_DAEMON_SETUP_TYPE = setuptools -- 2.34.1 From bugzilla at busybox.net Mon Oct 24 20:09:42 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 24 Oct 2022 20:09:42 +0000 Subject: [Buildroot] [Bug 14841] support/download/git fails with "fatal: No such remote 'origin'" due to incorrect check for origin remote In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14841 --- Comment #4 from Emil Medve --- Newer versions of `git` will expose this issue: ```bash $ git --version git version 2.37.2 $ git init Initialized empty Git repository in .../.git/ $ cat .git/config [core] repositoryformatversion = 0 filemode = true bare = false logallrefupdates = true $ git remote -v origin ``` -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Mon Oct 24 20:10:22 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 24 Oct 2022 20:10:22 +0000 Subject: [Buildroot] [Bug 14841] support/download/git fails with "fatal: No such remote 'origin'" due to incorrect check for origin remote In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14841 Emil Medve changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WORKSFORME |--- -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Mon Oct 24 20:14:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:14:28 +0200 Subject: [Buildroot] [git commit] package/sqlite: bump to version 3.39.4 Message-ID: <20221024204141.DB03886FB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c6f17bf1bf8d7bae46b997cc1cc1f21fdf6eb5fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/sqlite/sqlite.hash | 2 +- package/sqlite/sqlite.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sqlite/sqlite.hash b/package/sqlite/sqlite.hash index d5af2297f4..936f42e8e9 100644 --- a/package/sqlite/sqlite.hash +++ b/package/sqlite/sqlite.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 852be8a6183a17ba47cee0bbff7400b7aa5affd283bf3beefc34fcd088a239de sqlite-autoconf-3390200.tar.gz +sha256 f31d445b48e67e284cf206717cc170ab63cbe4fd7f79a82793b772285e78fdbb sqlite-autoconf-3390400.tar.gz sha256 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9 tea/license.terms diff --git a/package/sqlite/sqlite.mk b/package/sqlite/sqlite.mk index 01dbb153bc..4f4164c374 100644 --- a/package/sqlite/sqlite.mk +++ b/package/sqlite/sqlite.mk @@ -4,8 +4,8 @@ # ################################################################################ -SQLITE_VERSION = 3.39.2 -SQLITE_TAR_VERSION = 3390200 +SQLITE_VERSION = 3.39.4 +SQLITE_TAR_VERSION = 3390400 SQLITE_SOURCE = sqlite-autoconf-$(SQLITE_TAR_VERSION).tar.gz SQLITE_SITE = https://www.sqlite.org/2022 SQLITE_LICENSE = Public domain From thomas.petazzoni at bootlin.com Mon Oct 24 20:55:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:55:34 +0200 Subject: [Buildroot] [PATCH] package/sqlite: bump to version 3.39.4 In-Reply-To: <20221024104150.1470698-1-francois.perrad@gadz.org> References: <20221024104150.1470698-1-francois.perrad@gadz.org> Message-ID: <20221024225534.53c42f53@windsurf> On Mon, 24 Oct 2022 12:41:50 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > package/sqlite/sqlite.hash | 2 +- > package/sqlite/sqlite.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:56:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:56:39 +0200 Subject: [Buildroot] [git commit] configs/mx6cubox: bump Linux and U-Boot versions Message-ID: <20221024205654.9D2C786FC9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=21c4dd227040718013818a5fef6cb4de9e9ced6b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- configs/mx6cubox_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig index 86f506ef0a..cbd9378064 100644 --- a/configs/mx6cubox_defconfig +++ b/configs/mx6cubox_defconfig @@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15" @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi" BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:00 +0200 Subject: [Buildroot] [PATCH] configs/mx6cubox: bump Linux and U-Boot versions In-Reply-To: <20221024104142.1470677-1-francois.perrad@gadz.org> References: <20221024104142.1470677-1-francois.perrad@gadz.org> Message-ID: <20221024225700.5e711e67@windsurf> On Mon, 24 Oct 2022 12:41:42 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > configs/mx6cubox_defconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:19 +0200 Subject: [Buildroot] [PATCH] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot In-Reply-To: <20221024104133.1470655-1-francois.perrad@gadz.org> References: <20221024104133.1470655-1-francois.perrad@gadz.org> Message-ID: <20221024225719.1e2ba639@windsurf> On Mon, 24 Oct 2022 12:41:33 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- > configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:10 +0200 Subject: [Buildroot] [git commit] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Message-ID: <20221024205823.B6F8586FCE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0465ad54f290635f599361d00a9f601ace19416e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig index e325184e9e..1bb628b56b 100644 --- a/configs/olimex_a20_olinuxino_lime2_defconfig +++ b/configs/olimex_a20_olinuxino_lime2_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig index ba814b98b8..7105ea9962 100644 --- a/configs/olimex_a20_olinuxino_lime_defconfig +++ b/configs/olimex_a20_olinuxino_lime_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y From thomas.petazzoni at bootlin.com Mon Oct 24 21:00:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:00:29 +0200 Subject: [Buildroot] [git commit] package/python-distro: bump to version 1.8.0 Message-ID: <20221024210131.949BF86FD5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=325a354234594fdcf557c6fa3db75976acfde4bd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Also adds md5 file hash published on: https://pypi.org/pypi/distro/json For change log since 1.7.0, see: https://github.com/python-distro/distro/releases/tag/v1.8.0 Most notable change is the upstream support for Buildroot (included in python module docs and tests). Signed-off-by: Julien Olivain Signed-off-by: Thomas Petazzoni --- package/python-distro/python-distro.hash | 4 +++- package/python-distro/python-distro.mk | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/package/python-distro/python-distro.hash b/package/python-distro/python-distro.hash index 8f09197156..3d3e4258de 100644 --- a/package/python-distro/python-distro.hash +++ b/package/python-distro/python-distro.hash @@ -1,3 +1,5 @@ +# From https://pypi.org/pypi/distro/json +md5 a1e81972bbcfc0dc77dd0cde590c22a6 distro-1.8.0.tar.gz +sha256 02e111d1dc6a50abb8eed6bf31c3e48ed8b0830d1ea2a1b78c61765c2513fdd8 distro-1.8.0.tar.gz # Locally computed -sha256 151aeccf60c216402932b52e40ee477a939f8d58898927378a02abbe852c1c39 distro-1.7.0.tar.gz sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-distro/python-distro.mk b/package/python-distro/python-distro.mk index c69849b7ac..e079d8e265 100644 --- a/package/python-distro/python-distro.mk +++ b/package/python-distro/python-distro.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DISTRO_VERSION = 1.7.0 -PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/b5/7e/ddfbd640ac9a82e60718558a3de7d5988a7d4648385cf00318f60a8b073a +PYTHON_DISTRO_VERSION = 1.8.0 +PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/4b/89/eaa3a3587ebf8bed93e45aa79be8c2af77d50790d15b53f6dfc85b57f398 PYTHON_DISTRO_SOURCE = distro-$(PYTHON_DISTRO_VERSION).tar.gz PYTHON_DISTRO_LICENSE = Apache-2.0 PYTHON_DISTRO_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Mon Oct 24 21:01:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:01:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-distro: bump to version 1.8.0 In-Reply-To: <20221024195436.409490-1-ju.o@free.fr> References: <20221024195436.409490-1-ju.o@free.fr> Message-ID: <20221024230135.2df13e3d@windsurf> On Mon, 24 Oct 2022 21:54:36 +0200 Julien Olivain wrote: > Also adds md5 file hash published on: > https://pypi.org/pypi/distro/json > > For change log since 1.7.0, see: > https://github.com/python-distro/distro/releases/tag/v1.8.0 > > Most notable change is the upstream support for Buildroot > (included in python module docs and tests). > > Signed-off-by: Julien Olivain > --- > Tested on commit bd6e792 with commands: Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:02:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:02:06 +0200 Subject: [Buildroot] [git commit] package/python-daemon: bump to version 2.3.2 Message-ID: <20221024210245.C1ABA86FDD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=232ebbe3ab35861d8170ee11bc178338b6931132 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-daemon/python-daemon.hash | 4 ++-- package/python-daemon/python-daemon.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-daemon/python-daemon.hash b/package/python-daemon/python-daemon.hash index 4f53902d3f..005a969207 100644 --- a/package/python-daemon/python-daemon.hash +++ b/package/python-daemon/python-daemon.hash @@ -1,6 +1,6 @@ # md5, sha256 https://pypi.org/pypi/python-daemon/json -md5 3ab10a93472201214cd95c05f1923af6 python-daemon-2.2.3.tar.gz -sha256 affeca9e5adfce2666a63890af9d6aff79f670f7511899edaddca7f96593cc25 python-daemon-2.2.3.tar.gz +md5 b7397fe73d516dc14921500a1245b41c python-daemon-2.3.2.tar.gz +sha256 3deeb808e72b6b89f98611889e11cc33754f5b2c1517ecfa1aaf25f402051fb5 python-daemon-2.3.2.tar.gz # Locally computed sha256 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE.ASF-2 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL-3 diff --git a/package/python-daemon/python-daemon.mk b/package/python-daemon/python-daemon.mk index 600ccf5bf1..aa8019f4be 100644 --- a/package/python-daemon/python-daemon.mk +++ b/package/python-daemon/python-daemon.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DAEMON_VERSION = 2.2.3 -PYTHON_DAEMON_SITE = https://pypi.python.org/packages/source/p/python-daemon +PYTHON_DAEMON_VERSION = 2.3.2 +PYTHON_DAEMON_SITE = https://files.pythonhosted.org/packages/d9/3c/727b06abb46fead341a2bdad04ba4a4db5395c44c45d8ba0aa82b517e462 PYTHON_DAEMON_LICENSE = Apache-2.0 (library), GPL-3.0+ (test, build) PYTHON_DAEMON_LICENSE_FILES = LICENSE.ASF-2 LICENSE.GPL-3 PYTHON_DAEMON_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Mon Oct 24 21:02:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:02:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-daemon: bump to version 2.3.2 In-Reply-To: <20221024200406.2266871-1-james.hilliard1@gmail.com> References: <20221024200406.2266871-1-james.hilliard1@gmail.com> Message-ID: <20221024230242.7939ed77@windsurf> On Mon, 24 Oct 2022 14:04:06 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-daemon/python-daemon.hash | 4 ++-- > package/python-daemon/python-daemon.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:03:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:03:29 +0200 Subject: [Buildroot] [git commit] package/wireguard-linux-compat: bump version to 1.0.20220627 Message-ID: <20221024210410.AAFB086FE4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fe56cf24b649b5e87d7a9e5a1c3c23d7740fa3f6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For details, see the announcement: https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html Signed-off-by: Peter Korsgaard Signed-off-by: Thomas Petazzoni --- package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.hash b/package/wireguard-linux-compat/wireguard-linux-compat.hash index 3072b66e92..0f5713fc34 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.hash +++ b/package/wireguard-linux-compat/wireguard-linux-compat.hash @@ -1,4 +1,4 @@ -# https://lists.zx2c4.com/pipermail/wireguard/2021-December/007369.html -sha256 c0e607138a17daac656f508d8e63ea3737b5221fa5d9288191ddeb099f5a3b92 wireguard-linux-compat-1.0.20211208.tar.xz +# https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html +sha256 362d412693c8fe82de00283435818d5c5def7f15e2433a07a9fe99d0518f63c0 wireguard-linux-compat-1.0.20220627.tar.xz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.mk b/package/wireguard-linux-compat/wireguard-linux-compat.mk index 44cc30f36e..258e184765 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.mk +++ b/package/wireguard-linux-compat/wireguard-linux-compat.mk @@ -4,7 +4,7 @@ # ################################################################################ -WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20211208 +WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20220627 WIREGUARD_LINUX_COMPAT_SITE = https://git.zx2c4.com/wireguard-linux-compat/snapshot WIREGUARD_LINUX_COMPAT_SOURCE = wireguard-linux-compat-$(WIREGUARD_LINUX_COMPAT_VERSION).tar.xz WIREGUARD_LINUX_COMPAT_LICENSE = GPL-2.0 From thomas.petazzoni at bootlin.com Mon Oct 24 21:04:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:04:11 +0200 Subject: [Buildroot] [PATCH] package/wireguard-linux-compat: bump version to 1.0.20220627 In-Reply-To: <20221024075253.3228016-1-peter@korsgaard.com> References: <20221024075253.3228016-1-peter@korsgaard.com> Message-ID: <20221024230411.5430f6c0@windsurf> On Mon, 24 Oct 2022 09:52:53 +0200 Peter Korsgaard wrote: > For details, see the announcement: > https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html > > Signed-off-by: Peter Korsgaard > --- > package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- > package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:05:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:05:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 In-Reply-To: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> References: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> Message-ID: <20221024230532.438bb514@windsurf> On Mon, 24 Oct 2022 10:27:19 +0200 S?bastien Szymanski wrote: > Signed-off-by: S?bastien Szymanski > --- > package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- > package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Thanks for the patch, but did you test it? The 0001-Move-pytest-runner-to-tests_require.patch patch no longer applies: >>> python-flask-jsonrpc 2.2.2 Extracting gzip -d -c /home/thomas/dl/python-flask-jsonrpc/Flask-JSONRPC-2.2.2.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2 -xf - >>> python-flask-jsonrpc 2.2.2 Patching Applying 0001-Move-pytest-runner-to-tests_require.patch using patch: patching file setup.py Hunk #1 FAILED at 42. 1 out of 1 hunk FAILED -- saving rejects to file setup.py.rej make: *** [package/pkg-generic.mk:251: /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2/.stamp_patched] Error 1 Could you have a look? Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:11:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:11:04 +0200 Subject: [Buildroot] [git commit] package/rtl8723bu: fix build failure on PowerPC Message-ID: <20221024211145.AF28886FEB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9833f110bb7e2b85a362f8c49246ea7349a36bcb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add local patch(pending upstream[0]) to fix build failure with PowerPC due to a package re-defition of get_ra() that is only defined in Linux PowerPC implementation. [0]: https://github.com/lwfinger/rtl8723bu/pull/192 Fixes: http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- ...Fix-build-failure-on-PowerPc-architecture.patch | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch new file mode 100644 index 0000000000..06cf2d64c1 --- /dev/null +++ b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch @@ -0,0 +1,47 @@ +From dde7bddfddddb7212f2d9671391e2096d770c449 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Sun, 23 Oct 2022 22:57:41 +0200 +Subject: [PATCH] Fix build failure on PowerPc architecture + +In PowerPc Linux only get_ra() exists[0] and conflicts with local get_ra() +that has a completely different purpose. So let's rename local get_ra() +to wifi_get_ra() to make it different from Linux's get_ra(). + +[0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/include/asm/disassemble.h#n49 + +Upstream: https://github.com/lwfinger/rtl8723bu/pull/192 +Signed-off-by: Giulio Benetti +--- + hal/rtl8723bu_recv.c | 2 +- + include/wifi.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/hal/rtl8723bu_recv.c b/hal/rtl8723bu_recv.c +index a2fc82b..39e5044 100644 +--- a/hal/rtl8723bu_recv.c ++++ b/hal/rtl8723bu_recv.c +@@ -288,7 +288,7 @@ void update_recvframe_phyinfo( + !pattrib->icv_err && !pattrib->crc_err && + _rtw_memcmp(get_hdr_bssid(wlanhdr), get_bssid(&padapter->mlmepriv), ETH_ALEN)); + +- pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); ++ pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(wifi_get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); + + pkt_info.bPacketBeacon = pkt_info.bPacketMatchBSSID && (GetFrameSubType(wlanhdr) == WIFI_BEACON); + sa = get_ta(wlanhdr); +diff --git a/include/wifi.h b/include/wifi.h +index 5dc32eb..23578cc 100644 +--- a/include/wifi.h ++++ b/include/wifi.h +@@ -373,7 +373,7 @@ __inline static int IS_MCAST(unsigned char *da) + return _FALSE; + } + +-__inline static unsigned char * get_ra(unsigned char *pframe) ++__inline static unsigned char * wifi_get_ra(unsigned char *pframe) + { + unsigned char *ra; + ra = GetAddr1Ptr(pframe); +-- +2.34.1 + From thomas.petazzoni at bootlin.com Mon Oct 24 21:12:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:12:13 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc In-Reply-To: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> References: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> Message-ID: <20221024231213.41deaa35@windsurf> Hello Giulio, On Mon, 24 Oct 2022 00:14:25 +0200 Giulio Benetti wrote: > Add local patch(pending upstream[0]) to fix build failure with PowerPc due > to a package re-defition of get_ra() that is only defined in Linux PowerPc > implementation. > > [0]: https://github.com/lwfinger/rtl8723bu/pull/192 > > Fixes: > http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ > > Signed-off-by: Giulio Benetti > --- > ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch You forgot a reference to the upstream status of the patch in the patch itself, so I've added that when committing. Thanks a lot for looking into and fixing this build failure! Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:14:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:14:23 +0200 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS In-Reply-To: <20221024174911.75444-1-abrodkin@synopsys.com> References: <20221024174911.75444-1-abrodkin@synopsys.com> Message-ID: <20221024231423.24f384e3@windsurf> Hello Alexey, On Mon, 24 Oct 2022 19:49:11 +0200 Alexey Brodkin via buildroot wrote: > In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") > we opted-out from unconditional linking with "-latomic" and made it > a conditional based on real availability of __atomic_fetch_and_1() > in the toolchain. I.e. for many targets "-latomic" was not used > any longer. > > And in those supposedly rare cases when libatomic was required it was > all OK until there's a LD_LIBRARY_PATH set with something where yet > another libatomic.so instance exists, especially if that's the one from > host (in my case I used a separately built host toolchain). Then we see: > ---------------------->8----------------------- > /bin/sh ./libtool --tag=CC --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o -latomic > > libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 > .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format > collect2: error: ld returned 1 exit status > ---------------------->8----------------------- > > That happens because libtool of numactl adds contents of the aforementioned > LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it > finds becomes the one used for linking. What's more our precios cross-built > libatomic.so never even gets considered because that first found libatomic.so > is used with full path, not as "-latomic" as otherwise it would have been used > without helpful libtool. Thanks for the patch. However, I don't get it. Where is LD_LIBRARY_PATH defined? Do you have a reproducer for this issue? > +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ > + LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" This is really a red flag, $(STAGING_DIR)/lib is already in the default search path of the compiler, so that should never be needed. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:14:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:14:46 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: add missing ending slash Message-ID: <20221024211520.9C75F86FEF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3583e3f4013aca98e6360749c9d2154f6d699639 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This was missing in commit 08a0dea25f4e92ac5aa474876f706ddb9452fe2b ("package/bootgen: add bootgen host package") Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..6e0b765ba1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,7 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig -F: package/bootgen +F: package/bootgen/ N: Nicola Di Lieto F: package/uacme/ From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:27 +0200 Subject: [Buildroot] [git commit] package/libxmlpp: bump to version 5.0.2 Message-ID: <20221024214302.936288704A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=07197baadb40303afd543a0ed915cbdfb87e9e08 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libxmlpp/libxmlpp.hash | 4 ++-- package/libxmlpp/libxmlpp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxmlpp/libxmlpp.hash b/package/libxmlpp/libxmlpp.hash index 50238eff00..a974de57e3 100644 --- a/package/libxmlpp/libxmlpp.hash +++ b/package/libxmlpp/libxmlpp.hash @@ -1,5 +1,5 @@ -# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.1.sha256sum -sha256 15c38307a964fa6199f4da6683a599eb7e63cc89198545b36349b87cf9aa0098 libxml++-5.0.1.tar.xz +# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.2.sha256sum +sha256 7c17cc3e5a2214314dee5a1354f4b436f266ded6185232a0534f352a76240d5a libxml++-5.0.2.tar.xz # Hash for license file sha256 a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7 COPYING diff --git a/package/libxmlpp/libxmlpp.mk b/package/libxmlpp/libxmlpp.mk index 874577eb1f..3db711826e 100644 --- a/package/libxmlpp/libxmlpp.mk +++ b/package/libxmlpp/libxmlpp.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXMLPP_VERSION_MAJOR = 5.0 -LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).1 +LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).2 LIBXMLPP_LICENSE = LGPL-2.1 (library), LGPL-2.0+ (examples) LIBXMLPP_LICENSE_FILES = COPYING LIBXMLPP_SOURCE = libxml++-$(LIBXMLPP_VERSION).tar.xz From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:28 +0200 Subject: [Buildroot] [git commit] package/libssh: bump to version 0.10.4 Message-ID: <20221024214302.9D2828704B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13596db789ead1ae68d3d53c298cbdb73e55cdfc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libssh/libssh.hash | 4 ++-- package/libssh/libssh.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libssh/libssh.hash b/package/libssh/libssh.hash index 4dbab11374..90bc4c82d8 100644 --- a/package/libssh/libssh.hash +++ b/package/libssh/libssh.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://www.libssh.org/files/0.9/libssh-0.9.6.tar.xz.asc +# https://www.libssh.org/files/0.10/libssh-0.10.4.tar.xz.asc # with key 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D -sha256 86bcf885bd9b80466fe0e05453c58b877df61afa8ba947a58c356d7f0fab829b libssh-0.9.6.tar.xz +sha256 07392c54ab61476288d1c1f0a7c557b50211797ad00c34c3af2bbc4dbc4bd97d libssh-0.10.4.tar.xz sha256 1656186e951db1c010a8485481fa94587f7e53a26d24976bef97945ad0c4df5a COPYING diff --git a/package/libssh/libssh.mk b/package/libssh/libssh.mk index 4cadf83aee..5deb64b82e 100644 --- a/package/libssh/libssh.mk +++ b/package/libssh/libssh.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBSSH_VERSION_MAJOR = 0.9 -LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).6 +LIBSSH_VERSION_MAJOR = 0.10 +LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).4 LIBSSH_SOURCE = libssh-$(LIBSSH_VERSION).tar.xz LIBSSH_SITE = https://www.libssh.org/files/$(LIBSSH_VERSION_MAJOR) LIBSSH_LICENSE = LGPL-2.1 From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:31 +0200 Subject: [Buildroot] [git commit] package/libpng: bump to version 1.6.38 Message-ID: <20221024214302.B013987048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6fa63bce3f95105220474c1bc6b940e8f2340546 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 1.6.38 [September 14, 2022] Added configurations and scripts for continuous integration. Fixed various errors in the handling of tRNS, hIST and eXIf. Implemented many stability improvements across all platforms. Updated the internal documentation. Update hash of LICENSE file (update in year with https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpng/libpng.hash | 10 +++++----- package/libpng/libpng.mk | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libpng/libpng.hash b/package/libpng/libpng.hash index b57b1251a0..34b0a8a8b6 100644 --- a/package/libpng/libpng.hash +++ b/package/libpng/libpng.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.37/ -md5 015e8e15db1eecde5f2eb9eb5b6e59e9 libpng-1.6.37.tar.xz -sha1 3ab93fabbf4c27e1c4724371df408d9a1bd3f656 libpng-1.6.37.tar.xz +# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.38/ +md5 122e6b7837811698563083b352bc8ca2 libpng-1.6.38.tar.xz +sha1 60960ed110094843e5efa221df6a7d21614a4dba libpng-1.6.38.tar.xz # Locally computed: -sha256 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca libpng-1.6.37.tar.xz -sha256 bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b LICENSE +sha256 b3683e8b8111ebf6f1ac004ebb6b0c975cd310ec469d98364388e9cedbfa68be libpng-1.6.38.tar.xz +sha256 dfe5a536b0e5a531f844fb9c101a3089aca60772a503893b8e15f9457e369960 LICENSE diff --git a/package/libpng/libpng.mk b/package/libpng/libpng.mk index e4e629bbb5..43b4f373f1 100644 --- a/package/libpng/libpng.mk +++ b/package/libpng/libpng.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPNG_VERSION = 1.6.37 +LIBPNG_VERSION = 1.6.38 LIBPNG_SERIES = 16 LIBPNG_SOURCE = libpng-$(LIBPNG_VERSION).tar.xz LIBPNG_SITE = http://downloads.sourceforge.net/project/libpng/libpng$(LIBPNG_SERIES)/$(LIBPNG_VERSION) From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:25 +0200 Subject: [Buildroot] [git commit] package/libzlib: bump to version 1.2.13 Message-ID: <20221024214302.89D6487049@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5a948e32fece110c6208c1b0fa1a05d55037a7e7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop all patches (already in version) - Replace README by LICENSE file added with https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/releases/tag/v1.2.13 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...sue-that-discarded-provided-CC-definition.patch | 28 ----------------- package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ---------------------- .../0003-fix-CVE-2022-37434-regression.patch | 32 -------------------- package/libzlib/libzlib.hash | 4 +-- package/libzlib/libzlib.mk | 7 ++--- 5 files changed, 4 insertions(+), 102 deletions(-) diff --git a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch b/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch deleted file mode 100644 index 398e1c9481..0000000000 --- a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 05796d3d8d5546cf1b4dfe2cd72ab746afae505d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 28 Mar 2022 18:34:10 -0700 -Subject: [PATCH] Fix configure issue that discarded provided CC definition. - -Downloaded from upstream commit: -https://github.com/madler/zlib/commit/05796d3d8d5546cf1b4dfe2cd72ab746afae505d - -Signed-off-by: Bernd Kuhls ---- - configure | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/configure b/configure -index 52ff4a04e..3fa3e8618 100755 ---- a/configure -+++ b/configure -@@ -174,7 +174,10 @@ if test -z "$CC"; then - else - cc=${CROSS_PREFIX}cc - fi -+else -+ cc=${CC} - fi -+ - cflags=${CFLAGS-"-O3"} - # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure - case "$cc" in diff --git a/package/libzlib/0002-fix-CVE-2022-37434.patch b/package/libzlib/0002-fix-CVE-2022-37434.patch deleted file mode 100644 index a61be48536..0000000000 --- a/package/libzlib/0002-fix-CVE-2022-37434.patch +++ /dev/null @@ -1,35 +0,0 @@ -From eff308af425b67093bab25f80f1ae950166bece1 Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Sat, 30 Jul 2022 15:51:11 -0700 -Subject: [PATCH] Fix a bug when getting a gzip header extra field with - inflate(). - -If the extra field was larger than the space the user provided with -inflateGetHeader(), and if multiple calls of inflate() delivered -the extra header data, then there could be a buffer overflow of the -provided space. This commit assures that provided space is not -exceeded. - -Backported from: eff308af425b67093bab25f80f1ae950166bece1 -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7be8c6366..7a7289749 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,9 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -+ len = state->head->extra_len - state->length; - if (state->head != Z_NULL && -- state->head->extra != Z_NULL) { -- len = state->head->extra_len - state->length; -+ state->head->extra != Z_NULL && -+ len < state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch b/package/libzlib/0003-fix-CVE-2022-37434-regression.patch deleted file mode 100644 index 46a58710d2..0000000000 --- a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 8 Aug 2022 10:50:09 -0700 -Subject: [PATCH] Fix extra field processing bug that dereferences NULL - state->head. - -The recent commit to fix a gzip header extra field processing bug -introduced the new bug fixed here. - -Backported from: 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7a7289749..2a3c4fe98 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,10 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -- len = state->head->extra_len - state->length; - if (state->head != Z_NULL && - state->head->extra != Z_NULL && -- len < state->head->extra_max) { -+ (len = state->head->extra_len - state->length) < -+ state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/libzlib.hash b/package/libzlib/libzlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/libzlib/libzlib.hash +++ b/package/libzlib/libzlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/libzlib/libzlib.mk b/package/libzlib/libzlib.mk index f75502326b..e344cc7ad9 100644 --- a/package/libzlib/libzlib.mk +++ b/package/libzlib/libzlib.mk @@ -4,19 +4,16 @@ # ################################################################################ -LIBZLIB_VERSION = 1.2.12 +LIBZLIB_VERSION = 1.2.13 LIBZLIB_SOURCE = zlib-$(LIBZLIB_VERSION).tar.xz LIBZLIB_SITE = http://www.zlib.net LIBZLIB_LICENSE = Zlib -LIBZLIB_LICENSE_FILES = README +LIBZLIB_LICENSE_FILES = LICENSE LIBZLIB_INSTALL_STAGING = YES LIBZLIB_PROVIDES = zlib LIBZLIB_CPE_ID_VENDOR = zlib LIBZLIB_CPE_ID_PRODUCT = zlib -# 0002-fix-CVE-2022-37434.patch -LIBZLIB_IGNORE_CVES = CVE-2022-37434 - # It is not possible to build only a shared version of zlib, so we build both # shared and static, unless we only want the static libs, and we eventually # selectively remove what we do not want From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:38 +0200 Subject: [Buildroot] [git commit] package/iperf3: bump to version 3.12 Message-ID: <20221024214302.D559B8704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=225c0a9c0a7e790e92ee41d094932ce851b7dfcc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE file (update in year with https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) https://github.com/esnet/iperf/blob/3.12/RELNOTES.md Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/iperf3/iperf3.hash | 6 +++--- package/iperf3/iperf3.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/iperf3/iperf3.hash b/package/iperf3/iperf3.hash index c96d68cd99..15c75b6dac 100644 --- a/package/iperf3/iperf3.hash +++ b/package/iperf3/iperf3.hash @@ -1,4 +1,4 @@ -# From https://downloads.es.net/pub/iperf/iperf-3.10.1.tar.gz.sha256 -sha256 03bc9760cc54a245191d46bfc8edaf8a4750f0e87abca6764486972044d6715a iperf-3.10.1.tar.gz +# From https://downloads.es.net/pub/iperf/iperf-3.12.tar.gz.sha256 +sha256 72034ecfb6a7d6d67e384e19fb6efff3236ca4f7ed4c518d7db649c447e1ffd6 iperf-3.12.tar.gz # Locally computed -sha256 0e1cb1921904626f0d3e86cacc0e28333140f0f9957267cff0b9d185645743ed LICENSE +sha256 a5c2e3d799f2835156e565a3de4fad33d32ed289cdc9e414dfaf75719fd12ef9 LICENSE diff --git a/package/iperf3/iperf3.mk b/package/iperf3/iperf3.mk index 8c57c61fce..9041c86575 100644 --- a/package/iperf3/iperf3.mk +++ b/package/iperf3/iperf3.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF3_VERSION = 3.10.1 +IPERF3_VERSION = 3.12 IPERF3_SITE = https://downloads.es.net/pub/iperf IPERF3_SOURCE = iperf-$(IPERF3_VERSION).tar.gz IPERF3_LICENSE = BSD-3-Clause, BSD-2-Clause, MIT From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:30 +0200 Subject: [Buildroot] [git commit] package/libshout: bump to version 2.4.6 Message-ID: <20221024214302.A6C968704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=54a8261e6f0f80fe8eaa3ad48e0f3936015466e1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) and so autoreconf - libvorbis is optional since https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...nfigure.ac-add-an-option-to-disable-tools.patch | 51 ---------------------- package/libshout/Config.in | 1 - package/libshout/libshout.hash | 4 +- package/libshout/libshout.mk | 13 ++++-- 4 files changed, 11 insertions(+), 58 deletions(-) diff --git a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch b/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch deleted file mode 100644 index 5c20db72e9..0000000000 --- a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 148b56bf894192cef6dd133715e295260b934a71 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 5 Mar 2021 15:50:32 +0100 -Subject: [PATCH] configure.ac: add an option to disable tools - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.xiph.org/xiph/icecast-libshout/-/issues/2331] ---- - Makefile.am | 5 ++++- - configure.ac | 5 +++++ - 2 files changed, 9 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index ea855cf..79241f1 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -3,10 +3,13 @@ - AUTOMAKE_OPTIONS = 1.6 foreign - ACLOCAL_AMFLAGS = -I m4 - --SUBDIRS = include src doc win32 tools -+SUBDIRS = include src doc win32 - if HAVE_EXAMPLES - SUBDIRS += examples - endif -+if HAVE_TOOLS -+SUBDIRS += tools -+endif - - EXTRA_DIST = INSTALL m4/shout.m4 m4/acx_pthread.m4 \ - m4/ogg.m4 m4/vorbis.m4 m4/xiph_compiler.m4 m4/xiph_net.m4 \ -diff --git a/configure.ac b/configure.ac -index 264b9b0..34f971c 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -100,6 +100,11 @@ AC_ARG_ENABLE([examples], - AS_HELP_STRING([--disable-examples],[Do not build example code])) - AM_CONDITIONAL([HAVE_EXAMPLES],[test "${enable_examples}" != "no"]) - -+dnl Allow tools not to be build -+AC_ARG_ENABLE([tools], -+ AS_HELP_STRING([--disable-tools],[Do not build tools])) -+AM_CONDITIONAL([HAVE_TOOLS],[test "${enable_tools}" != "no"]) -+ - dnl Module checks - XIPH_NET - --- -2.30.0 - diff --git a/package/libshout/Config.in b/package/libshout/Config.in index f8749b9183..6a7560b349 100644 --- a/package/libshout/Config.in +++ b/package/libshout/Config.in @@ -1,7 +1,6 @@ config BR2_PACKAGE_LIBSHOUT bool "libshout" select BR2_PACKAGE_LIBOGG - select BR2_PACKAGE_LIBVORBIS help Libshout is a library for communicating with and sending data to an icecast server. It handles the socket connection, the diff --git a/package/libshout/libshout.hash b/package/libshout/libshout.hash index ae43e0a9c8..d562b5231b 100644 --- a/package/libshout/libshout.hash +++ b/package/libshout/libshout.hash @@ -1,8 +1,8 @@ # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA512SUMS -sha512 290844185da16961f03434d3e341573dd6cb0139e5fa81902903021b641382d2629302d7c356bc591b35656754e07f4e44a8d9e782e092b17a051b9ae8f54341 libshout-2.4.5.tar.gz +sha512 e8478cdbf9a27674c16a7b620d1576f2e31a47262b8e29b314d0f46d4e5be24b9a29790b7b226f48939bc34cacf5734fae0aa5686c7ed5879cdbd827ff8e0339 libshout-2.4.6.tar.gz # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA256SUMS -sha256 d9e568668a673994ebe3f1eb5f2bee06e3236a5db92b8d0c487e1c0f886a6890 libshout-2.4.5.tar.gz +sha256 39cbd4f0efdfddc9755d88217e47f8f2d7108fa767f9d58a2ba26a16d8f7c910 libshout-2.4.6.tar.gz # Hash for license file sha256 7a4436f9ec37603356791c87de3bc444989befd2682d29efb3d97604e04c1852 COPYING diff --git a/package/libshout/libshout.mk b/package/libshout/libshout.mk index 4afb762de6..be63786795 100644 --- a/package/libshout/libshout.mk +++ b/package/libshout/libshout.mk @@ -4,14 +4,12 @@ # ################################################################################ -LIBSHOUT_VERSION = 2.4.5 +LIBSHOUT_VERSION = 2.4.6 LIBSHOUT_SITE = https://downloads.xiph.org/releases/libshout LIBSHOUT_LICENSE = LGPL-2.0+ LIBSHOUT_LICENSE_FILES = COPYING LIBSHOUT_INSTALL_STAGING = YES -LIBSHOUT_DEPENDENCIES = host-pkgconf libogg libvorbis -# We're patching configure.ac -LIBSHOUT_AUTORECONF = YES +LIBSHOUT_DEPENDENCIES = host-pkgconf libogg LIBSHOUT_CONF_OPTS = \ --disable-examples \ --disable-tools @@ -23,6 +21,13 @@ else LIBSHOUT_CONF_OPTS += --disable-theora endif +ifeq ($(BR2_PACKAGE_LIBVORBIS),y) +LIBSHOUT_CONF_OPTS += --enable-vorbis +LIBSHOUT_DEPENDENCIES += libvorbis +else +LIBSHOUT_CONF_OPTS += --disable-vorbis +endif + ifeq ($(BR2_PACKAGE_SPEEX),y) LIBSHOUT_CONF_OPTS += --enable-speex LIBSHOUT_DEPENDENCIES += speex From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:36 +0200 Subject: [Buildroot] [git commit] package/iperf: bump to version 2.1.8 Message-ID: <20221024214302.CC6FF8704B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ede944f53509f825aa983de19d34fc30259b812c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 2.1.8 (as of August 5th, 2022) ------------------------------ - Add support for --bounceback to perform a repsonsiveness test (see man page for other options) - add support for working loads with --bounceback - Fix to wait_tick with Mac OS X - Various python pyflows commits - add support for client side tcp-write-time histograms and mean/min/max - add support for human readable dscp or -T values (see man page) - udp_accept no longer accepts packets from a previous run as a new connection, this can occur with long network delays - multiple isoch bug fixes for both UDP and TCP - isoch server provides mean/min/max/stdev for both frames and packets - UDP max MTU discovery, requires configure.ac will support --enable-discover-defaultlen prior to compile - Drop first patch (already in version) - Drop second patch (not needed since https://sourceforge.net/p/iperf2/code/ci/de5cb9954617309eecb8ae7d24b14e6b1e0c11eb) https://sourceforge.net/projects/iperf2/files/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/iperf/0001-Fix-build-with-musl-libc.patch | 67 ---------------------- .../iperf/0002-compat-gettcpinfo.c-fix-build.patch | 34 ----------- package/iperf/iperf.hash | 4 +- package/iperf/iperf.mk | 2 +- 4 files changed, 3 insertions(+), 104 deletions(-) diff --git a/package/iperf/0001-Fix-build-with-musl-libc.patch b/package/iperf/0001-Fix-build-with-musl-libc.patch deleted file mode 100644 index 269079ee1e..0000000000 --- a/package/iperf/0001-Fix-build-with-musl-libc.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 6766ab322a9eb8c73f8276be9cdea356eb124de0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 11 Nov 2021 07:58:10 +0200 -Subject: [PATCH] Fix build with musl libc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -musl libc defines its own struct ethhdr that conflicts with the kernel -define one. The kernel headers provide a way to suppress its struct -ethhdr. For that to work the libc headers must precede the kernel. Move -the kernel linux/if_tun.h include below libc net/ethernet.h. That fixes -the following build failure: - -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/net/ethernet.h:10, - from ../include/headers.h:117, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/netinet/if_ether.h:116:8: error: redefinition of ???struct ethhdr??? - 116 | struct ethhdr { - | ^~~~~~ -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_tun.h:20, - from ../include/headers.h:110, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_ether.h:148:8: note: originally defined here - 148 | struct ethhdr { - | ^~~~~~ - -Fixes bug #157. - -Signed-off-by: Baruch Siach ---- -Upstream status: sent to Robert McMahon - - include/headers.h | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/include/headers.h b/include/headers.h -index 00e0ea0dba42..887490475381 100644 ---- a/include/headers.h -+++ b/include/headers.h -@@ -106,11 +106,6 @@ typedef bool _Bool; - #include - #endif - --#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) --#include --#include --#endif -- - - // AF_PACKET HEADERS - #if defined(HAVE_LINUX_FILTER_H) && defined(HAVE_AF_PACKET) -@@ -146,6 +141,11 @@ typedef bool _Bool; - #define IPV6HDRLEN 40 - #endif // HAVE_AF_PACKET - -+#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) -+#include -+#include -+#endif -+ - #ifdef WIN32 - - /* Windows config file */ --- -2.33.0 - diff --git a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch b/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch deleted file mode 100644 index 786c7d1873..0000000000 --- a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a3339604bafa99f66e12687efc2c50d2e2df1276 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 12 Dec 2021 20:03:04 +0100 -Subject: [PATCH] compat/gettcpinfo.c: fix build - -Fix the following build failure raised since commit -c8f861a0a07b0606a581f2658c71959ad9417923: - -gettcpinfo.c: In function 'gettcpinfo': -gettcpinfo.c:101:42: error: expected declaration or statement at end of input - 101 | inline void gettcpinfo (int sock, struct ReportStruct *sample) { - | ^~~~~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/073e070478f0cda34784af96bb3a802c3aac8f72 - -Signed-off-by: Fabrice Fontaine ---- - compat/gettcpinfo.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/compat/gettcpinfo.c b/compat/gettcpinfo.c -index 4e11e2a..1d3791a 100644 ---- a/compat/gettcpinfo.c -+++ b/compat/gettcpinfo.c -@@ -99,4 +99,5 @@ inline void gettcpinfo (SOCKET sock, struct ReportStruct *sample) { - }; - #else - inline void gettcpinfo (int sock, struct ReportStruct *sample) { -+}; - #endif --- -2.33.0 - diff --git a/package/iperf/iperf.hash b/package/iperf/iperf.hash index 2e1f433dc7..34218bcf3b 100644 --- a/package/iperf/iperf.hash +++ b/package/iperf/iperf.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/iperf2/files/ -sha1 41bd049625cbecda2bf5b6a6cc12a6c5baec549b iperf-2.1.6.tar.gz +sha1 7725efffc6ef46fe5247ee326c39e5fa2eadf1eb iperf-2.1.8.tar.gz # Locally computed: -sha256 4a43e44439b95622aebeee55754a17d1c94076032e90620dfc1ab9908cb9e080 iperf-2.1.6.tar.gz +sha256 8e2cf2fbc9d0d4d1cf9d109b1e328459f9622993dc9a4c5a7dc8a2088fb7beaf iperf-2.1.8.tar.gz sha256 5f9f5c4feca3347c3b3c0ada8b16b4e6b698aac4e6f016a24adf61a5915336d1 COPYING diff --git a/package/iperf/iperf.mk b/package/iperf/iperf.mk index f999ff4ac2..47944880a3 100644 --- a/package/iperf/iperf.mk +++ b/package/iperf/iperf.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF_VERSION = 2.1.6 +IPERF_VERSION = 2.1.8 IPERF_SITE = http://downloads.sourceforge.net/project/iperf2 IPERF_LICENSE = MIT-like IPERF_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:23 +0200 Subject: [Buildroot] [git commit] package/lirc-tools: bump to version 0.10.2 Message-ID: <20221024214302.807C887048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=58cc3977e83487bdaa1df232cf7adf6383d49cd7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop first to third patches (already in version) - Add a patch to disable documentation and avoid a build failure without doxygen https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../lirc-tools/0001-Fix-build-without-Python.patch | 63 ---------------------- ...ins-devinput.c-fix-build-with-musl-1.2.0.patch} | 0 .../0002-Fix-python-client-cross-compile.patch | 47 ---------------- .../0002-configure-add-disable-doc-option.patch | 52 ++++++++++++++++++ ...Fix-lirc-version-detection-when-cross-com.patch | 51 ------------------ package/lirc-tools/lirc-tools.hash | 8 +-- package/lirc-tools/lirc-tools.mk | 2 +- 7 files changed, 57 insertions(+), 166 deletions(-) diff --git a/package/lirc-tools/0001-Fix-build-without-Python.patch b/package/lirc-tools/0001-Fix-build-without-Python.patch deleted file mode 100644 index b1940eac0d..0000000000 --- a/package/lirc-tools/0001-Fix-build-without-Python.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 71f329d997d949d3c12d62d2f1473a1c99ee49b0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Sun, 27 Aug 2017 21:30:37 +0300 -Subject: [PATCH] Fix build without Python - -Don't define HAVE_PYTHON35 when PYTHON_LIBS is empty. - -Also, don't build Python dependent code when HAVE_PYTHON35 is not -defined. - -This fixes build failures like: - -Makefile:1616: recipe for target 'python-pkg/dist/lirc-0.10.0.tar.gz' failed -make[3]: *** [python-pkg/dist/lirc-0.10.0.tar.gz] Error 1 -python-pkg/lirc/_client.c:1:20: fatal error: Python.h: No such file or directory - #include - ^ - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 74a2bcab6b - - Makefile.am | 2 ++ - configure.ac | 3 ++- - 2 files changed, 4 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index 9f3dd14340cc..d8164fcd44cf 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -104,6 +104,7 @@ dist_py_pkg_doc_DATA = python-pkg/doc/Doxyfile \ - - libpython = $(libdir)/python$(PYTHON_VERSION) - pydir = $(libpython)/site-packages/lirc -+if HAVE_PYTHON35 - py_LTLIBRARIES = python-pkg/lib/_client.la - python_pkg_lib__client_la_SOURCES = \ - python-pkg/lirc/_client.c -@@ -116,6 +117,7 @@ python_pkg_lib__client_la_LDFLAGS = \ - $(PYTHON_LIBS) - python_pkg_lib__client_la_LIBADD = \ - lib/liblirc_client.la -+endif - - pylint: .phony - $(MAKE) -C tools pylint -diff --git a/configure.ac b/configure.ac -index 4108688433f8..07d901deafdf 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -50,7 +50,8 @@ test -z "$PYTHON_LIBS" && \ - test -n "$PYTHON_LIBS" || \ - AC_MSG_WARN([No python package found (missing devel package?)]) - python_version_nodots=$(echo $PYTHON_VERSION | tr -d '.') --AM_CONDITIONAL(HAVE_PYTHON35, [test $python_version_nodots -ge 35]) -+AM_CONDITIONAL(HAVE_PYTHON35, [test -n "$PYTHON_LIBS" && \ -+ test $python_version_nodots -ge 35]) - CFLAGS="$CFLAGS $PYTHON_CFLAGS" - - --- -2.14.1 - diff --git a/package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch b/package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch similarity index 100% rename from package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch rename to package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch diff --git a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch b/package/lirc-tools/0002-Fix-python-client-cross-compile.patch deleted file mode 100644 index 02deefaf98..0000000000 --- a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 13c4ffcfde07f659a836fba4a604dc1c5024bb90 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 29 Aug 2017 11:37:36 +0300 -Subject: [PATCH] Fix python client cross compile - -The setup.py setuptools wrapper needs to use a version of python built -specifically for cross compiling to cross compile successfully. Allow -setting that in the environment using the SETUPTOOLS_ENV variable. - -Fixes the following build failure: - -/usr/bin/ld: skipping incompatible .../lirc-tools-0.10.0/lib/.libs/liblirc_client.so when searching for -llirc_client -/usr/bin/ld: cannot find -llirc_client -collect2: error: ld returned 1 exit status -error: command '/usr/bin/gcc' failed with exit status 1 -Makefile:1578: recipe for target 'all-local' failed - -Signed-off-by: Baruch Siach ---- -Upstream status: https://sourceforge.net/p/lirc/tickets/308/ - - Makefile.am | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index d8164fcd44cf..a16be4278ae2 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -131,6 +131,7 @@ pep8: $(py_PYTHON) - if HAVE_PYTHON35 - all-local: - cd python-pkg; \ -+ $(SETUPTOOLS_ENV) \ - CFLAGS="-I$(abs_top_srcdir)/lib -I$(abs_builddir)/lib" \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py \ - $(if $(VERBOSE),,-q) build -@@ -179,6 +180,7 @@ $(abs_builddir)/python-pkg/setup.py: - $(PYTHON_TARBALL): $(abs_builddir)/python-pkg/setup.py - cp $(top_builddir)/VERSION $(abs_builddir)/python-pkg - cd $(abs_builddir)/python-pkg; CFLAGS=-I$(abs_top_srcdir)/lib \ -+ $(SETUPTOOLS_ENV) \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py -q sdist - - $(top_builddir)/python-pkg/VERSION: VERSION --- -2.14.1 - diff --git a/package/lirc-tools/0002-configure-add-disable-doc-option.patch b/package/lirc-tools/0002-configure-add-disable-doc-option.patch new file mode 100644 index 0000000000..fab485ffef --- /dev/null +++ b/package/lirc-tools/0002-configure-add-disable-doc-option.patch @@ -0,0 +1,52 @@ +From e9d5cbc01e3c0d6a31e2dba2f224b7f3dd21db37 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Sun, 23 Oct 2022 16:10:50 +0200 +Subject: [PATCH] configure: add --disable-doc option + +Allow the user to disable documentation through --disable-doc + +Signed-off-by: Fabrice Fontaine +--- + Makefile.am | 6 +++++- + configure.ac | 8 ++++++++ + 2 files changed, 13 insertions(+), 1 deletion(-) + +diff --git a/Makefile.am b/Makefile.am +index 6718af13..58a321d8 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -45,7 +45,11 @@ if WITH_SYSTEMDSYSTEMUNITDIR + SYSTEMD_DIR = systemd + endif + +-SUBDIRS = lib daemons tools plugins configs doc $(SYSTEMD_DIR) ++if HAVE_DOC ++ DOC_DIR = doc ++endif ++ ++SUBDIRS = lib daemons tools plugins configs $(DOC_DIR) $(SYSTEMD_DIR) + + if INSTALL_ETC + +diff --git a/configure.ac b/configure.ac +index d28c6732..f3384c95 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -486,6 +486,14 @@ AC_ARG_VAR(SETUPTOOLS_ENV, + ) + + ++AC_ARG_ENABLE(doc, ++ [ --enable-doc Build and install documentation (default=yes)], ++ [ enable_doc="${enableval}" ], ++ [ enable_doc=yes] ++) ++AM_CONDITIONAL([HAVE_DOC], [test x$enable_doc = xyes]) ++ ++ + suffix=$(echo "$VERSION" | sed 's/.*-//') + AM_CONDITIONAL(DEVEL, [test x$suffix = xdevel]) + +-- +2.35.1 + diff --git a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch b/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch deleted file mode 100644 index 04fbfe6ea2..0000000000 --- a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 732fd31610a6790a927ea9ed6d660796a1641254 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 7 Sep 2017 08:12:01 +0200 -Subject: [PATCH] build: Fix lirc version detection when cross compiling. - -The setup.py script that runs on the host can't use the client library -built for target. So setup.py falls back to a wrong hard-coded VERSION -value. - -Instead of importing the target library, use exec() to read -lirc/config.py directly for its VERSION value. - -Fixes build failure: - -/usr/bin/install -c -m 644 ./python-pkg/dist/lirc-0.10.0.tar.gz \ - '.../output/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/lirc' -/usr/bin/install: cannot stat './python-pkg/dist/lirc-0.10.0.tar.gz': \ - No such file or directory - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 732fd31610a6 - - python-pkg/setup.py | 9 +++------ - 1 file changed, 3 insertions(+), 6 deletions(-) - -diff --git a/python-pkg/setup.py b/python-pkg/setup.py -index e9b33690f828..a2d92e0432aa 100644 ---- a/python-pkg/setup.py -+++ b/python-pkg/setup.py -@@ -6,14 +6,11 @@ import subprocess - import os.path - import os - --try: -- import lirc.config -- VERSION = lirc.config.VERSION.replace('-devel','') --except ImportError: -- VERSION='0.0.0' -- - from setuptools import setup, Extension - -+exec(open("lirc/config.py").read()) -+VERSION = VERSION.replace('-devel','') -+ - if 'CFLAGS' in os.environ: - cflags = os.environ['CFLAGS'].split() - if 'LDFLAGS' in os.environ: --- -2.14.1 - diff --git a/package/lirc-tools/lirc-tools.hash b/package/lirc-tools/lirc-tools.hash index 187768db47..4808508cca 100644 --- a/package/lirc-tools/lirc-tools.hash +++ b/package/lirc-tools/lirc-tools.hash @@ -1,6 +1,6 @@ -# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.1/ -sha1 9d6f6d18ac566a96ef4ca1d6909a4e8bc517d48a lirc-0.10.1.tar.bz2 -md5 86c3f8e4efaba10571addb8313d1e040 lirc-0.10.1.tar.bz2 +# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.2/ +sha1 02092890205891b6de5a699294485a1eedba46c5 lirc-0.10.2.tar.bz2 +md5 cb96cfb0af8067c0062e2f5a100f426a lirc-0.10.2.tar.bz2 # Locally computed -sha256 8b753c60df2a7f5dcda2db72c38e448ca300c3b4f6000c1501fcb0bd5df414f2 lirc-0.10.1.tar.bz2 +sha256 3d44ec8274881cf262f160805641f0827ffcc20ade0d85e7e6f3b90e0d3d222a lirc-0.10.2.tar.bz2 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lirc-tools/lirc-tools.mk b/package/lirc-tools/lirc-tools.mk index 05f20f5726..5263330741 100644 --- a/package/lirc-tools/lirc-tools.mk +++ b/package/lirc-tools/lirc-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIRC_TOOLS_VERSION = 0.10.1 +LIRC_TOOLS_VERSION = 0.10.2 LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION) LIRC_TOOLS_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:35 +0200 Subject: [Buildroot] [git commit] package/lensfun: bump to version 0.3.3 Message-ID: <20221024214302.C31728704A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cf8e0288c003b39ebc852cb3876c3b78608296ff branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to new upstream site to get latest release https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lensfun/Config.in | 2 +- package/lensfun/lensfun.hash | 5 +---- package/lensfun/lensfun.mk | 4 ++-- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/package/lensfun/Config.in b/package/lensfun/Config.in index 7ec49020ee..7c424f5351 100644 --- a/package/lensfun/Config.in +++ b/package/lensfun/Config.in @@ -11,7 +11,7 @@ config BR2_PACKAGE_LENSFUN actually use Lensfun to process your images you need an image editing application with Lensfun support. - http://lensfun.sourceforge.net + https://lensfun.github.io if BR2_PACKAGE_LENSFUN diff --git a/package/lensfun/lensfun.hash b/package/lensfun/lensfun.hash index cb56f32b56..f03d0b54ae 100644 --- a/package/lensfun/lensfun.hash +++ b/package/lensfun/lensfun.hash @@ -1,7 +1,4 @@ -# From https://sourceforge.net/projects/lensfun/files/0.3.2 -sha1 1d978b15aa7304d66a4931fa37ca9f8f89396c16 lensfun-0.3.2.tar.gz -md5 247e59a0812ec451f6cd0d20b3379cb5 lensfun-0.3.2.tar.gz # Locally calculated -sha256 ae8bcad46614ca47f5bda65b00af4a257a9564a61725df9c74cb260da544d331 lensfun-0.3.2.tar.gz +sha256 57ba5a0377f24948972339e18be946af12eda22b7c707eb0ddd26586370f6765 lensfun-0.3.3.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 docs/gpl-3.0.txt sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c docs/lgpl-3.0.txt diff --git a/package/lensfun/lensfun.mk b/package/lensfun/lensfun.mk index 9258409f57..f82ed44495 100644 --- a/package/lensfun/lensfun.mk +++ b/package/lensfun/lensfun.mk @@ -4,8 +4,8 @@ # ################################################################################ -LENSFUN_VERSION = 0.3.2 -LENSFUN_SITE = https://sourceforge.net/projects/lensfun/files/$(LENSFUN_VERSION) +LENSFUN_VERSION = 0.3.3 +LENSFUN_SITE = $(call github,lensfun,lensfun,v$(LENSFUN_VERSION)) LENSFUN_LICENSE = LGPL-3.0+ (libraries), GPL-3.0+ (programs) LENSFUN_LICENSE_FILES = docs/gpl-3.0.txt docs/lgpl-3.0.txt LENSFUN_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:39 +0200 Subject: [Buildroot] [git commit] package/file: bump to version 5.43 Message-ID: <20221024214302.DE93F87048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f17b56f1aa43361eff4a81538a61e34c509ebb70 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of src/vasprintf.c (typo fixed with https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) https://github.com/file/file/blob/FILE5_43/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/file/file.hash | 6 +++--- package/file/file.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/file/file.hash b/package/file/file.hash index 33875776eb..49fa9e1e1b 100644 --- a/package/file/file.hash +++ b/package/file/file.hash @@ -1,7 +1,7 @@ # Locally calculated after verifying signature -# ftp://ftp.astron.com/pub/file/file-5.41.tar.gz.asc +# ftp://ftp.astron.com/pub/file/file-5.43.tar.gz.asc # using key BE04995BA8F90ED0C0C176C471112AB16CB33B3A -sha256 13e532c7b364f7d57e23dfeea3147103150cb90593a57af86c10e4f6e411603f file-5.41.tar.gz +sha256 8c8015e91ae0e8d0321d94c78239892ef9dbc70c4ade0008c0e95894abfb1991 file-5.43.tar.gz sha256 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274 COPYING sha256 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462 src/mygetopt.h -sha256 c4fa92d6504b88484a12140fe3e24b9b29b0112717f94b1ff4205d54828b1c70 src/vasprintf.c +sha256 cc3d8704489d08eaefcaee8c639cc6436c6f0f6b2b03986d3ba7521a1a1d2fc9 src/vasprintf.c diff --git a/package/file/file.mk b/package/file/file.mk index c06975460f..9b751e2696 100644 --- a/package/file/file.mk +++ b/package/file/file.mk @@ -4,7 +4,7 @@ # ################################################################################ -FILE_VERSION = 5.41 +FILE_VERSION = 5.43 FILE_SITE = ftp://ftp.astron.com/pub/file FILE_LICENSE = BSD-2-Clause, BSD-4-Clause (one file), BSD-3-Clause (one file) FILE_LICENSE_FILES = COPYING src/mygetopt.h src/vasprintf.c From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:33 +0200 Subject: [Buildroot] [git commit] package/libminiupnpc: bump to version 2.2.4 Message-ID: <20221024214302.BA34487049@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aa371ee5341b8a3e445d83557a413c821fd0309d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 2022/02/20: upnpc: use of @ to replace local lan address 2021/11/09: python module : Allow to specify the root description url - Drop patch (already in version) - Update hash of LICENSE file (license "refined" for github with https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...pc-CMakeLists-txt-fix-install-for-headers.patch | 43 ---------------------- package/libminiupnpc/libminiupnpc.hash | 4 +- package/libminiupnpc/libminiupnpc.mk | 2 +- 3 files changed, 3 insertions(+), 46 deletions(-) diff --git a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch b/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch deleted file mode 100644 index 2e4c8a69e6..0000000000 --- a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f82b0563a72e33800f5918ead68c41bcda1fd4c1 Mon Sep 17 00:00:00 2001 -From: heitbaum -Date: Fri, 1 Oct 2021 00:00:27 +1000 -Subject: [PATCH] miniupnpc/CMakeLists.txt: fix install for headers - -[Retrieved from: -https://github.com/miniupnp/miniupnp/commit/f82b0563a72e33800f5918ead68c41bcda1fd4c1] -Signed-off-by: Fabrice Fontaine ---- - miniupnpc/CMakeLists.txt | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 0553eeb3..6b0904c0 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -221,16 +221,16 @@ endif () - - if (NOT UPNPC_NO_INSTALL) - install (FILES -- miniupnpc.h -- miniwget.h -- upnpcommands.h -- igd_desc_parse.h -- upnpreplyparse.h -- upnperrors.h -- upnpdev.h -- miniupnpctypes.h -- portlistingparse.h -- miniupnpc_declspec.h -+ include/miniupnpc.h -+ include/miniwget.h -+ include/upnpcommands.h -+ include/igd_desc_parse.h -+ include/upnpreplyparse.h -+ include/upnperrors.h -+ include/upnpdev.h -+ include/miniupnpctypes.h -+ include/portlistingparse.h -+ include/miniupnpc_declspec.h - DESTINATION include/miniupnpc - ) - diff --git a/package/libminiupnpc/libminiupnpc.hash b/package/libminiupnpc/libminiupnpc.hash index 4714dd6f48..5dca8dd6cf 100644 --- a/package/libminiupnpc/libminiupnpc.hash +++ b/package/libminiupnpc/libminiupnpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 dce41b4a4f08521c53a0ab163ad2007d18b5e1aa173ea5803bd47a1be3159c24 miniupnpc-2.2.3.tar.gz -sha256 90bb92bf524970569296022fea562c85a4ec4d99a16f3aef2144d13d7087b631 LICENSE +sha256 481a5e4aede64e9ef29895b218836c3608d973e77a35b4f228ab1f3629412c4b miniupnpc-2.2.4.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/libminiupnpc/libminiupnpc.mk b/package/libminiupnpc/libminiupnpc.mk index f3661396ca..9dc5c719a9 100644 --- a/package/libminiupnpc/libminiupnpc.mk +++ b/package/libminiupnpc/libminiupnpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMINIUPNPC_VERSION = 2.2.3 +LIBMINIUPNPC_VERSION = 2.2.4 LIBMINIUPNPC_SOURCE = miniupnpc-$(LIBMINIUPNPC_VERSION).tar.gz LIBMINIUPNPC_SITE = http://miniupnp.free.fr/files LIBMINIUPNPC_INSTALL_STAGING = YES From giulio.benetti at benettiengineering.com Mon Oct 24 21:53:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 24 Oct 2022 23:53:36 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc In-Reply-To: <20221024231213.41deaa35@windsurf> References: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> <20221024231213.41deaa35@windsurf> Message-ID: On 24/10/22 23:12, Thomas Petazzoni wrote: > Hello Giulio, > > On Mon, 24 Oct 2022 00:14:25 +0200 > Giulio Benetti wrote: > >> Add local patch(pending upstream[0]) to fix build failure with PowerPc due >> to a package re-defition of get_ra() that is only defined in Linux PowerPc >> implementation. >> >> [0]: https://github.com/lwfinger/rtl8723bu/pull/192 >> >> Fixes: >> http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ >> >> Signed-off-by: Giulio Benetti >> --- >> ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch > > You forgot a reference to the upstream status of the patch in the patch > itself, so I've added that when committing. Thank you, every time I keep forgetting... -- Giulio Benetti CEO/CTO at Benetti Engineering sas > Thanks a lot for looking > into and fixing this build failure! > > Best regards, > > Thomas From thomas.petazzoni at bootlin.com Tue Oct 25 05:40:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 05:40:01 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-24 Message-ID: <20221025054008.81E3F401E8@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-24 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 0 | 1 | 13 | 2022.08.x | 17 | 22 | 0 | 39 | master | 132 | 265 | 8 | 405 | Classification of failures by reason for master ----------------------------------------------- host-bootgen-xilinx_v2022.2 | 21 libnss-3.84 | 13 crun-1.5 | 11 igd2-for-linux-2.1 | 11 systemd-250.4 | 11 glibc-2.36-44-g2628500f5dff... | 10 host-binutils-2.38 | 10 host-f2fs-tools-1.15.0 | 10 host-sentry-cli-1.59.0 | 9 sysvinit-2.99 | 9 brltty | 8 xz-5.2.7 | 7 host-go-1.19.1 | 6 libcodec2-1.0.5 | 6 btrfs-progs-5.16.2 | 5 host-rust-1.64.0 | 5 libarchive-3.6.1 | 5 unknown | 5 dash-0.5.11.5 | 4 host-pahole-73383b3a39afe86... | 4 linux-6.0.1 | 4 dahdi-linux-5c840cf43838e06... | 3 gensio-2.5.5 | 3 libgcrypt-1.10.1 | 3 libpciaccess-0.17 | 3 linuxptp-3.1.1 | 3 autofs-5.1.8 | 2 elfutils-0.186 | 2 gerbera-1.10.0 | 2 host-binutils-2.39 | 2 libcap-ng-0.8.3 | 2 libglvnd-1.4.0 | 2 libgpg-error-1.45 | 2 mtd-2.1.3 | 2 toolchain-external-codescap... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 acpid-2.0.33 | 1 acpitool-0.5.1 | 1 apparmor-3.0.4 | 1 batman-adv-2021.4 | 1 binutils-arc-2020.09-release | 1 boost-1.80.0 | 1 cairo-1.16.0 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 coreutils-9.1 | 1 dmalloc-5.6.5 | 1 docker-cli-20.10.19 | 1 dropbear-2022.82 | 1 edk2-edk2-stable202102 | 1 efivar-38 | 1 ffmpeg-4.4.3 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gobject-introspection-1.72.0 | 1 host-binutils-2.37 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-11.3.0 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 jack2-1.9.20 | 1 libabseil-cpp-20220623.1 | 1 libcamera-ba6435930f08e802c... | 1 libdcadec-0.2.0 | 1 libglib2-2.72.3 | 1 libqb-2.0.6 | 1 libzlib-1.2.12 | 1 lightning-2.1.3 | 1 linux-tools | 1 ltp-testsuite-20220930 | 1 lxc-4.0.12 | 1 mariadb-10.3.36 | 1 mesa3d-22.1.6 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 opencv3-3.4.17 | 1 openpgm-5-3-128 | 1 openssh-9.1p1 | 1 perl-5.34.1 | 1 php-8.1.11 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 procps-ng-3.3.17 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.2 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 s6-portable-utils-2.2.3.2 | 1 sdl-1.2.15 | 1 stress-ng-0.13.05 | 1 uccp420wlan-6.9.1 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 wolfssl-5.5.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/4b1867d9912af2b5f5132352efa6e5d86ff62fda | m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/23eb733c9212149715c4f022045735b5ccbb3455 | x86_64 | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9027735ccc3ecc9bd9b084d284dcf18f19fc5900 | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/6f2cd92b9a4bd0fdbc62c29a80fa13743e1fec46 | ORPH powerpc64le | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/1b74f37533b253c0d7e6e471825de8b44770134c | arceb | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/ca71539b6c5989d71975f09f45bd34118c23ac26 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4aa59f961081cf65331baca7c132923000d3c7b1 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/51965b6ae0e956bd53bf8785ecc1529d59a9b332 | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/174bddb2b4b5aba1d23b9fcd5dfbec57c2cee271 | arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/351723ea2ef57da67404dcbd54c754d4b85a1cf8 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/35494960c1dfc3385b92c1d17630d6b4f115a0a5 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/7aa10ee3b1a70b74bfa3db88bc441a02634d0094 | m68k | brltty | TIM | http://autobuild.buildroot.net/results/d24dd9da1d82eaf2256ac3cd2e1eff02dc86f519 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d740119cf7483532c6183f2b64e57b28f21e08fe | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/7554066df42f4c20efaf64ee709fc47e6647b2c2 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d90e449e44e6f1e57331db753bc8281a6655db47 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/d9ea1e55697063e212d406af172759b336e095ed | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/685d2ce53d25c7771eafaf7293e8c7389241c12e | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/88ddc90d6134f64bc4f036bac68fa08576a353c9 | or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b9d67bb2c639096fa005bc09f48fba4f9e74d7af | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/d0f0dea2138371c13e4e2b1ce39beef1a2f7375c | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1c5ab8a4e2f719aa843390020ad19df62567c4c3 | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4ab0773e5235141aa9527cebb3d1d041f15d3fa6 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0eafc50e756610186c06c8c4d4989f46fb2574b4 | ORPH or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/e783332cd955b4133c1550ed8a3db5fba021a89d | mipsel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/55388bffd0eef1fd2661d22ef383a9947f6d2816 | sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/a07f2f34359b2c24a2e7ea0bbbdf2edfd429dbfc | ORPH microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2aac3c26f7141f8e4f8ca7456fb136ac13389d63 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/27b08e3904e0249bad7ce05a191fbea4e3fd62d4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1af5bd7324755d49ca7e01f1923eda5a77e0d7da | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c987304527650f7aaf32b76046634b0b5e3f8e75 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2db14c0c83873d29c418af1a2462faba57dfb220 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f9a9e613966ce90cc755cd34158c63ec641ee364 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9888958eeb75352a80b27866a4da9bd1530a48f3 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aed876e9c62ed12eeedcc6473fc02a06353528a6 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b34fb6d70c583885f243436a3965b855785acbb4 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d2a309a4e3b28c2f75b15b59b86b2238065a0fd7 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fd1b41edb32536905611688de611ecad92b5855a | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4f959766f8f202821a1ee5e33bb801b6b922f41d | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c0efc57acbf11b473086c492e4c7666ba2de2e17 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a39db8c6c8a8f2d7fc46abf31c85dc1293fb6755 | i686 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/330e4ea817fcc4a3fc2cde8d9b753ad4eefe0e82 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b895476fa94f5e7f92aaef94093ea16c6a535cc6 | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7cc108963022f14c23b993414a8e5b19dbe34489 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/9f8e826227031d8a3a0771586db86d879aabb96c | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/2cfd0a2103e7a302d0369e5cd83f8da18f1b1b9d | ORPH x86_64 | docker-cli-20.10.19 | NOK | http://autobuild.buildroot.net/results/54847564cf80771268189c13d9385692a7c2d45f | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/ecb444fcb3f457319a4aee90b851638c4be17771 | x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/4ce6ebce82a5058790bccbf9e8e92ce2c36bda58 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a8c5d9cb30b4df1f90d46d886cb1d095daa8517b | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/9d43aaaeec92b6cf12b62b415b882f22649bc69b | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/92e41240564e5f2dd8418a28bb6018356b8f0a9c | ORPH sparc64 | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/5708e820dbc95b212261e44a013725339da88913 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/b726d3ceea6180748d75bf467b4542f509862057 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/b342ced57101b8e39063f5d3dc193cbf1ccd6cd4 | powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a3f562f237a74093bd59f00dcb48514b4f3ff5f9 | m68k | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/7c35af274ac5c35c9d453a607d79bea8abcbc680 | s390x | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/0e4890f585236099b1e69f349d06aca399554dec | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/b087c5fb20434f7b372a7176bf7591f8a543da1d | m68k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/c932385c9de760d2fcaed072bb244ae1d4ded09f | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/b1f603733b63e505e859311beb66be644dee6fb7 | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/83721b2d66739ca0b62e71854960ea7aea68f5d2 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8fa9a466f2fde9b659a97932100920f4156fc8e6 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5971a925a661974720e343bdf87f25bea600fa28 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/363914df8a1962217cbb503255dd725787f73393 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74f37d64d24a61ab2c1f2b75df783676cfde0f71 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15a1c54b919ec7f23a1f734f6673b9376aae6ac5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2eb295fe84b9a9758c0f2f7731205fd2cc40830 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4d5671b256f0148454215e2679cfdc4efc14eb5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b47fb6908e6cc83464bd8696786b7d51b4c3d25d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44a751037c840ae53f12f4550ca4955bdb47488a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/889d956f0c8d2b392a2220834e5e2070a9e8c72e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/229914e2c78f247dccd6e98dabd446cc85a5dded | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/019123e25a7e0de62e34dac5f47e602c3b28225d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3b4a5ea19e13c39c0726fc277d36c77d38e2de | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/9ad60bcd2351b5fd8d5df0de30300847b6f377f5 | ORPH mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/2875216e8fb92d01e48acbf181bb9c1514ded713 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4d426459bf121befd75f7845927fea7aab04cfe6 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1608af0ee967ceef9a802d8e56765d755663ff9a | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c541f9a55c6defb02bb6d951702b851256405c0f | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/287374b57e301c751f5ff963f5880e723e3df20a | i486 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bf5c7c933698d213a9dda0aab4026897e92a4dc1 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c28cbb9af212bde7df1157415c22f0dfe4eb2c2d | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7ed05682a699380c405a923a934445de35165735 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/829ba5bb9263ced2081ab467a0be2c09a1a0e36c | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3d1cac0c8b9e607b8314561e3c8d256fad334d1d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c976e60db81a29206cfabf7818c9a2eb7ecd071 | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b82527fed7f18931060bd12253e4bbcabbfc2ab1 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f31a87f1ec6f103eeadec6789ece3517f64121fb | powerpc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/0e4db35e2af74da72a9c3d326ee37c984eaff03b | mips | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/dd0b0c562cab2815f13da90fa71ab8e1707424cd | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/c30e851f3185b373febb6e5429432e86eba1ba8b | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/797139d4bb2c28c691cf6ed65fe222490fce49db | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/41b3d6cd51d2c015f0d5fc935385b9237f526e01 | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4866e57e2c06446faee71747c3773622b035e7d9 | sparc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/dcb4ae27f2977505dc1558e109d5b132e7d78f78 | x86_64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/0e8dd39145cd4e09282e4349221f9d9e82a4406f | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/7eaaf1d633e9f98370afc1d3635c29e76785be63 | m68k | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4c5aae92b3c5352d0faebcaf9163781778bb185f | mipsel | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/08cdbca41a03cf87d240f90286fa79541c1fd654 | xtensa | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3380fb29450e10839df77f357056789baa8c4974 | sparc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/44398e17f0b7f81893130c62618895e882aa7e16 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/de4a80951d485066ed846daa07b1d1cdc7bf667f | arceb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/759f66dcc7041132c60491a15bee4f986c0fdb01 | riscv32 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/24686d256784bad7b85a14a1630e7ef020e1b914 | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/f0022becdaf028f3e90d6f4533c148da9d9c2086 | s390x | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/b19198b02cdabd3c1e74c955d3a01595bccb03c6 | powerpc64le | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3db2992c7ad005f6061dc71d5de0b2f6257d71ba | powerpc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/8ed08cd95101f945721ee346a0a4435efe66abc7 | aarch64_be | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/a568d8653b7e4b63f3398eeeaa56819c37a0cd6a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4e5a0a4ab583dca5c37a0b7e331127e424ce2562 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fa2fa8b5d3fa2931cc3367d46f5135ea02fd47b1 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dc8a8552440c60a27031f26c123760f0a7b7238f | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/93495599068e5116cc5557adbe6ddacac7975422 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a6d812846727c794aee9f262eb4d049db93f2ccf | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cd8864d5f8dcb5637b4e47ada4f7d9520f226b4 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cb440fee7d39d31696de0b87ef4c78d533c316a2 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/065cdfacb0a9f8a11dc250a5b58e4180989d7957 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d0b4a79ca5ab34af9b0bf783f4c3757150f62bd | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/296ca4bc2e786301b75704484acfa5bd30a41656 | mipsel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/35b220314754ae7ef9c9055c2518a5637c0035b8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2fd87a1f760d32ad7a9de04253abd0659e43f7c5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f7f423ae1b7772b01da86a2491052324bdd76692 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9034a76ee59141ac22924f7267a34946ead0171a | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/429eaa7be5171fecffd35d49f3e54a0842edda35 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ebfd51c8cee8a02f31d6a9235e9335684abab211 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0e78500e9efedc490f6ee1c4ee8cea2f98ab3039 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5837eb9d4d6a9a6b883552eaa0b4424dc04ee6d0 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d2984117affdc3d9eaf4d9a05a1be0e0f44167d1 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f00b33a8c236983b2f50593fb4f7c12564016930 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d5c317f61f4000ad726b5f1ebbfa3454921deb64 | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/32af62492de4b8751e7d0956ae1ba32b9360dee5 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/2a7f0adbce46629bde631ba74bb28adeee0c1351 | arm | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a5979d1127879f6fd5c0e74fae4c85bfcdcf6fb2 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/eb434afd826e48f76f18f54b821b0a883a01ada7 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bf3990d76834551f42a8623458564cee4b9956c0 | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bd472ce0aa085f757fb3619b403fe195e13a87a7 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b1c7dfecfebcf7192776380280a4c1e8a7b586c | sh4a | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1f4d84e8aed2c653900d4468b41d767714174f55 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9e2987f98db50e3115d298ec48e191905f548645 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b13974e3697310e386d579af22809fc2ee61e09f | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68723c3da50c18105a1ea526516d1b2cb10e8a3d | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87a0a9cdc52ecc74b80bab68721b5d0b06d2fe54 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a6c6af7ed9b378d6726209a26e8d94aecc3186d7 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a5c0787c81e1a51a79cd60bb66bc5bf5a2b4b74a | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a44249757668827d49980cdbd1b6a5b34744d59b | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/364449429e91c2cd93feaf5d8832554fd18b1d2b | ORPH riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a6f381137e6e35459c352ed598821610f8531252 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/141d14efc2b097ef40a1f913b694cce7fda63901 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e336116c073dfa6f2294b5c7096bcb661168395f | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0473b16b78eeabbc0e5a1681a5dcfb432a5460b5 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ac053992977bc449e1529bcbdcc5bc5572e441b6 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c943b9609ef3bb1a310bbf8a22bd5b995fc94353 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1aba121e41d432277a52815030bc6ab9666d56d4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/caeb4b79db2ce29779308c526af20ac7c4fb6ada | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ca16a3daab3ece0374030e5a0386c51a8bb707c9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/88b63734e5065524568b285c4f721ec2796457ca | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cb42ced664bef29321c48d7f3a4a0e435b4f04e | aarch64_be | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/5614ed4132684dcbd35cf09385c267417a5f471b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/68ad7668716388ed5c48a67db6e0ef23ef83e116 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/f8c1af24d59fad49d018c2137524f38d38ff967b | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/75b6a996c49a38b71aa3695dc5bfeec12f1197ba | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b492799c9db98e6f47d04efb6127ea7112d8c49 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3e439548155e83d1a345a4425334a140f23c04e8 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c806a48d476cf706ca1895a10bb796185e8ec750 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bbb3908599feb8dc907c9c2f7240d4222067c87b | sparc | libcamera-ba6435930f08e802c... | NOK | http://autobuild.buildroot.net/results/fad0e82946a236b2c5f14bb06f9eced93e0a0299 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a63d1fd00e62b067d31fe56a2ef32b0b48740234 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/f08a7f2e318804317476cf688b1c386e7b24cab6 | microblazeel | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3e8880bbff7d42985d4c4d86d49dd5e6b9020050 | m68k | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/95016bfec95d40f72eab2e92fba9853f665d13fb | arceb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/d6cad256f5a9b726ec18fa09b809f40906855ad2 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/02975a99e68e55472dbb10ff00be16ccbe5d1f29 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/0c11c5ade6117ec5b1f1d53fac1925b095ba4052 | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/d9a23dd8e01d141217d884617b8a0bab5cea3262 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/1c09c64ba1951a33dc92b49c86c955437cc0c41b | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/47cee2ea21bbf2117e30b2a7dacc4f2674e134a0 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/6658af360cffb28652ddb93362d368d02e36c662 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/fe622168cbb73cddb73aec1bb5893018045b5850 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b9338c4b72012f67df0d412b75c051113e4c9358 | arm | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/2e6c5a7b1239e81c36fcdec94dbe4eabb3187202 | ORPH m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/b422e3610c76b7ea1e2061fe9ac57dee55f6dc54 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/cfc9584ee06f18bf91ff3dd5406d711fa21fe702 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/897e975312929172443132b472110b9148dc4cae | ORPH aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2c3e7b0d08cbb3ec062cc4c852fc54759952c65a | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5d84c74cc399c2c08481d2ebf982161cb459b254 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/338940364d5085eb8eed8d26fe63ba071717d198 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5e8e8f4e7c0f90ee7137183b1eb0b873ac09586c | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c2571b602a7b9b836faeef237dd182b88bb2915 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/434c58eed5eb80dd75b465c75d586d9b61297a76 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6517f518d887921f5eebeb2b087c56363cec5222 | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ad895b98f132bd7c8bc06866a6a3c3d60add920a | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/441a5d95cda42a7e3e9227eb70a27a2a3852d02e | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/75141ef352d42d22a4f09ab3190ad22a301cd7f5 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e9163f9d3776fc7fe9aa2324471773d1b2145a20 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c628ae62b900172c26839ff80be50d293a1ac0bd | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/922101a2b5626810b197d656446a0b3257d1ab3c | s390x | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/30d7c3522ee6883568d8b68b81ad77a1d95b61d3 | arceb | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/d681b61f60f77d61aa54c2470dcf512499f79ab9 | xtensa | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/ea72df7f71d15ae7ead41f038a1c3cf0b53854a1 | powerpc | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/b91de249553053f33b9bed77ee0cd340f720f41e | mips64 | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/96ab21bfe7a61fb1658d8d117501b2ce328b5b84 | ORPH x86_64 | lightning-2.1.3 | NOK | http://autobuild.buildroot.net/results/72a977275c00c184e1d5e6ac35f50faf0d159476 | mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/58ecbfb1374f0f14f83d153af4c29ab7d0dde8e8 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6bc5d11c10825ec1b6902a316ccb171b1b52c34d | ORPH riscv64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/059145c8b651b0f93db8235c88ac2cd19aae362c | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e517bcb0a90d6603f824a2e6c4a89440dcb00224 | ORPH nios2 | linux-tools | NOK | http://autobuild.buildroot.net/results/74ff4beaa1a6faf59b622846bffd69482d45b84c | ORPH armeb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/0b799b5d44c410b9ac6fd073edb89c77369dda55 | microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/32d0a02ac4f01046ab4bb72c7705728f0499e044 | powerpc64le | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f23b60ee02a942d1db02c58af90d6549334c2dcb | sparc64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/1b7af48c1e4c3753edd9c86b41f119054750e34d | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d4ee8e839f9473787675bf190a60360e6ec03904 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/6012c0045938d8c69eeeaeb6c5dc8c0bff6a7356 | ORPH xtensa | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/7c5259c365f958b6850345d7c5b8a4b20449e8bc | riscv32 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/d74a430daa787685f19cdb8ee86a5c7414b78d86 | mips64el | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/4d4861310b4253bf6c770ac186a2f6f67838dd5c | powerpc64le | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/769a513983beb6fa4cf322e9ac62172329b83e80 | nios2 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/c20d359de137f9d2ca25d4a9303c0cd8413a3d22 | ORPH sparc64 | opencv3-3.4.17 | NOK | http://autobuild.buildroot.net/results/288372dba2046535fb17c2277170712600094ca7 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/69527235ac234fbe4fc8586792148c57c8163989 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/73a6ba0b1f28fd8bdb0d3da83172dbe20764f00a | ORPH armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ffdce0e57b7472488e8c76ee92d1b89fe10091f5 | sh4aeb | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/56b537e9a56a0c6bae6da36e2ff2a6497bc2bc6a | arm | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/f26badb344ee9188b3c51fbaeb5e8adb9d339136 | ORPH microblaze | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/9b6bd17d67d29c334af98a37fcb48d52a07d2107 | ORPH sparc | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/8a2057f8bb607d1aaefc9ef063e960aecfd7a360 | mips64el | python-greenlet-1.1.2 | NOK | http://autobuild.buildroot.net/results/a3a12e54be72bcce060722dfe1f2c9eb593199ab | powerpc64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/20ba5c8832b9263d9857e101b5e6bcaac6ba3135 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/33a5d63634e1989572d137ad6e23b6192489345e | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/81423069ba732cee18948612d75e0e7b2ca54621 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/abfec3a7faec737272ec843fe853e1d22e3700ea | ORPH sparc64 | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/ba6e5d9c70d05168b681bb98c937f8882a8c9578 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ad70d923fcb71cd15fc7edc2c51f7e19a9bc66a6 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d912439be25859b22c63d2512d17aa480640c239 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ff5df966f0ea7d2c3d1eba1c397df7c51a2701fa | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a26381a8da49ce1e3fe471e72c6f8fb8955e8b30 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e5f14a8a61f5e8e88e94c0d0e5d441b5430836f1 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6c8a68d29038bfad94191a73dcb8bcafc0a2cf9b | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ddd4141e690aa165a9768b15d6571d1623cafd3d | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6a4221c9ce9b88b21c56eb81edf10737ffe33608 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4b34698b596c2b5d65903088ae1e7f4ae019b465 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cef59241d8586cca2b88c95ffc42c67b6bf9bcbb | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/b809788e1f8feffdf0778a1576efd07b7d0b08f0 | arceb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/61fe8e63577f2201dedc59192786c6a8438ac084 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6075e5b722aa3cf02c8ff3c2124ea09a333d4fb0 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/62800b8386f20ee17301d96748d738c1fc93185e | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d2bcc2eabd52a8cf5e4b28a3ba8187ba8f23aae | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/18478399be1619fe857387ea4fcc853674d18cde | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/63da902d42e2851e5860047eaf542eaa66a2b17a | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a3bbb57630f5f6cda42fd30a4abc849785d94691 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0dbfde06dfd01efa33584cfdd7f056e17db651f1 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0e1471a4509a55b2418b9fab994a3eee673b0ae0 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/f7283b24335f6873ee4584bd134bd034cafcd9ae | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/50f92affe157af7261a1e425d526be64ea22fa94 | ORPH sh4eb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/333aef73b5990b47e6c9c1b3e170e7c76302c5ae | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5271753fcc0269d22a0b11f89cf1b1da040f937f | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/2eda57d62a6cfcf4a1efc4410ebbbd93e4e99b07 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/febd86b73ee319caf40bf98a52ed953e35d642e4 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/e5f2753f002425de96f40821bc90e967bef020ff | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/10bbbcdf1b40898140ed6db567cf7e5b2baba4a5 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/139d393db5e4d5bf9db8e2a25a145e3e5c53c52e | arc | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/57218d72118b6331e99735596831e1671dfe6227 | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3c0325fe9a2007cb53ad553ed0743d003bb550b6 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/090c70758f090bdf3206af31f8c1974b9cfd2f93 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/36661d7f3853dec651b6ac99642afce200b9361e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d65f9f6706fe396367addbbc57ef0181456061b8 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f1a6be4a2936b67415817d37fa80d9b45680a23b | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/79bad7156a0f11d1f534d192616a85b8197b968e | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/ce848de38fdff7911788bf9232e409eb2ba64c86 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/46895fb6636372b23f968967041824323a185501 | ORPH mips64el | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/908073808920d9c7f4f5b9dc56ebddf01d1c0f7b | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/46a97e5ebc5218f8d7decaaa67b53acf3f18516e | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- libuwsc | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- nios2 | libuwsc | TIM | http://autobuild.buildroot.net/results/c6ed54be2e8b3298927a7f431fe246656d58441b | Classification of failures by reason for 2022.08.x -------------------------------------------------- linux-5.17.15 | 4 host-pahole-73383b3a39afe86... | 2 dc3dd-7.2.641 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 gerbera-1.10.0 | 1 host-go-1.18.6 | 1 host-rust-1.62.0 | 1 igd2-for-linux-2.1 | 1 libdeflate-1.12 | 1 libnss-3.81 | 1 linux-5.10.115-cip7 | 1 nodejs-16.17.1 | 1 openssh-legal-info | 1 package/openssh/openssh.mk:... | 1 perl-5.34.1 | 1 php-8.1.9 | 1 xfsprogs-5.14.2 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/53a61cf4406570d23e10bc9b8fc43c2ce973a468 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/4b32cc37bf8095d365836ae7eaf0279b37bfed34 | ORPH x86_64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/0f1d6aca5b0327815d3f1e08f0e4e8dd61efd08b | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5ca8fc75181b1da347b601665443ad1505a05985 | mips64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/d0f0235848188c95198b45b53f644fb4bb7c6936 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b18f05020bf9af82b142d00207a6243e9a8e94cb | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f83062230c2fa148e82e1bf4980f5928e11aed1a | powerpc | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/c1fd0cf15cb4e793be737e27a8e3d7f0472e783e | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ff5c2e909d7d2d17bf569f3c95eab4f9adfe91eb | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/48175110072d8bde2a5ac70649ea453ef4f4ee2e | powerpc64le | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/a4d4243be5e1a78e14d30ea1eb4d049e96c509b8 | powerpc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/447d8fc83ef5d01ff306cf3fea9527b2212aeded | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/02928452171be3332a42f59d27f0e4fbe6e04734 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/73289305bdf9feb20310aa707c22b3ff8afe2fa5 | ORPH armeb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/c92d9e8714b89cfb4c898a802a9ae9422fff60d3 | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/88a324848838af4e2c2c9f4b3775a9daf49dc728 | ORPH mipsel | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4 | powerpc64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fbdfe4565fa34d62d9ceb30d330178370f78127c | ORPH aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/a9614a88f246deeb6680899e38b0257b5b878ee5 | mips | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4aa7b516e7b211ed88ee277b55a5bff952e3371e | aarch64 | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/4ba838bb2fc711e7aed06a319bb151066945b41a | nios2 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/b0b2784325d5550a13ff4e099525411b17984643 | ORPH Gitlab CI results for 2022-10-24 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestAarch64Pages64kGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701180 | ORPH TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700904 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700906 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700909 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700911 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700914 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700916 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700986 | ORPH TestExecline | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700989 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701459 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701460 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700993 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700995 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700997 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701175 | ORPH -- http://autobuild.buildroot.net From d.lang at abatec.at Tue Oct 25 06:02:08 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:02:08 +0000 Subject: [Buildroot] [PATCH v2 00/11] group llvm projects and bump to version 15.0.3 Message-ID: This series attempts two things: - Move the different llvm subprojects into one folder and share version and site information. - Bump the version to the latest 15.0.3 Starting with version 12 different subprojects added dependencies or sources that would be available when building from the "monorepo". These have been added as new host packages. Changes v1 -> v2: - Rebased onto current master - Bump to 15.0.3 instead of 15.0.1 - llvm: use CMAKE_HOST_C_COMPILER instead of HOSTCC - libclc: Add missing change to package/Config.in Daniel Lang (11): package/llvm-project: new group for llvm packages package/llvm: move to llvm-project folder package/lld: move to llvm-project subfolder package/clang: move to llvm-project subfolder package/compiler-rt: move to llvm-project subfolder package/llvm-project/llvm-cmake: new package package/llvm-project/llvm-libunwind: new package package/llvm-project: bump to version 15.0.3 package/spirv-llvm-translator: bump to version 15.0.0-2 package/libclc: move to llvm-project subfolder and bump to 15.0.3 DEVELOPERS: add Daniel Lang for llvm-project DEVELOPERS | 21 ++++++++------- package/Config.in | 8 +++--- package/Config.in.host | 2 +- ...hains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch | 0 package/{ => llvm-project}/clang/Config.in | 0 package/{ => llvm-project}/clang/clang.hash | 2 +- package/{ => llvm-project}/clang/clang.mk | 15 +++-------- .../{ => llvm-project}/compiler-rt/Config.in | 0 .../compiler-rt/compiler-rt.hash | 2 +- .../compiler-rt/compiler-rt.mk | 9 +++---- .../0001-support-out-of-tree-build.patch | 0 package/{ => llvm-project}/libclc/Config.in | 0 package/{ => llvm-project}/libclc/libclc.hash | 2 +- package/{ => llvm-project}/libclc/libclc.mk | 4 +-- package/{ => llvm-project}/lld/Config.in.host | 0 package/{ => llvm-project}/lld/lld.hash | 2 +- package/{ => llvm-project}/lld/lld.mk | 13 +++------- .../llvm-project/llvm-cmake/llvm-cmake.hash | 2 ++ package/llvm-project/llvm-cmake/llvm-cmake.mk | 16 ++++++++++++ .../llvm-libunwind/llvm-libunwind.hash | 3 +++ .../llvm-libunwind/llvm-libunwind.mk | 18 +++++++++++++ package/llvm-project/llvm-project.mk | 11 ++++++++ package/{ => llvm-project}/llvm/Config.in | 0 package/{ => llvm-project}/llvm/llvm.hash | 2 +- package/{ => llvm-project}/llvm/llvm.mk | 26 ++++++++++--------- .../llvm/0001-nfc-Fix-missing-include.patch | 24 ----------------- .../spirv-llvm-translator.hash | 2 +- .../spirv-llvm-translator.mk | 4 +-- 28 files changed, 101 insertions(+), 87 deletions(-) rename package/{ => llvm-project}/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch (100%) rename package/{ => llvm-project}/clang/Config.in (100%) rename package/{ => llvm-project}/clang/clang.hash (52%) rename package/{ => llvm-project}/clang/clang.mk (89%) rename package/{ => llvm-project}/compiler-rt/Config.in (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.hash (50%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.mk (82%) rename package/{ => llvm-project}/libclc/0001-support-out-of-tree-build.patch (100%) rename package/{ => llvm-project}/libclc/Config.in (100%) rename package/{ => llvm-project}/libclc/libclc.hash (51%) rename package/{ => llvm-project}/libclc/libclc.mk (92%) rename package/{ => llvm-project}/lld/Config.in.host (100%) rename package/{ => llvm-project}/lld/lld.hash (52%) rename package/{ => llvm-project}/lld/lld.mk (61%) create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.hash create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.mk create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.hash create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.mk create mode 100644 package/llvm-project/llvm-project.mk rename package/{ => llvm-project}/llvm/Config.in (100%) rename package/{ => llvm-project}/llvm/llvm.hash (52%) rename package/{ => llvm-project}/llvm/llvm.mk (94%) delete mode 100644 package/llvm/0001-nfc-Fix-missing-include.patch -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:02:52 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:02:52 +0000 Subject: [Buildroot] [PATCH v2 01/11] package/llvm-project: new group for llvm packages Message-ID: To make updating easier in the future, group all llvm projects in one subfolder and define some variables for all of them. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- package/llvm-project/llvm-project.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 package/llvm-project/llvm-project.mk diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk new file mode 100644 index 0000000000..7ba89bb605 --- /dev/null +++ b/package/llvm-project/llvm-project.mk @@ -0,0 +1,10 @@ +################################################################################ +# +# llvm-project +# +################################################################################ + +LLVM_PROJECT_VERSION = 11.1.0 +LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) + +include $(sort $(wildcard package/llvm-project/*/*.mk)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:04:05 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:04:05 +0000 Subject: [Buildroot] [PATCH v2 02/11] package/llvm: move to llvm-project folder Message-ID: To make updating easier, move llvm into the llvm-project folder and use the defined information. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 6 +++--- package/Config.in | 2 +- .../llvm/0001-nfc-Fix-missing-include.patch | 0 package/{ => llvm-project}/llvm/Config.in | 0 package/{ => llvm-project}/llvm/llvm.hash | 0 package/{ => llvm-project}/llvm/llvm.mk | 5 ++--- 6 files changed, 6 insertions(+), 7 deletions(-) rename package/{ => llvm-project}/llvm/0001-nfc-Fix-missing-include.patch (100%) rename package/{ => llvm-project}/llvm/Config.in (100%) rename package/{ => llvm-project}/llvm/llvm.hash (100%) rename package/{ => llvm-project}/llvm/llvm.mk (98%) diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..8763fde182 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1610,7 +1610,7 @@ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ F: package/lld/ -F: package/llvm/ +F: package/llvm-project/llvm/ F: package/python-cython/ F: package/python-pycups/ F: package/python-raven/ @@ -2544,7 +2544,7 @@ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ -F: package/llvm/ +F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ F: package/mesa3d/ @@ -2956,7 +2956,7 @@ N: Valentin Korenblit F: package/clang/ F: package/clinfo/ F: package/libclc/ -F: package/llvm/ +F: package/llvm-project/llvm/ N: Vanya Sergeev F: package/lua-periphery/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..3b7d4a9448 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2069,7 +2069,7 @@ comment "linux-pam plugins" source "package/libpam-tacplus/Config.in" endif source "package/liquid-dsp/Config.in" - source "package/llvm/Config.in" + source "package/llvm-project/llvm/Config.in" source "package/lttng-libust/Config.in" source "package/matio/Config.in" source "package/mpc/Config.in" diff --git a/package/llvm/0001-nfc-Fix-missing-include.patch b/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch similarity index 100% rename from package/llvm/0001-nfc-Fix-missing-include.patch rename to package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch diff --git a/package/llvm/Config.in b/package/llvm-project/llvm/Config.in similarity index 100% rename from package/llvm/Config.in rename to package/llvm-project/llvm/Config.in diff --git a/package/llvm/llvm.hash b/package/llvm-project/llvm/llvm.hash similarity index 100% rename from package/llvm/llvm.hash rename to package/llvm-project/llvm/llvm.hash diff --git a/package/llvm/llvm.mk b/package/llvm-project/llvm/llvm.mk similarity index 98% rename from package/llvm/llvm.mk rename to package/llvm-project/llvm/llvm.mk index 977c0a08c2..1adad17b16 100644 --- a/package/llvm/llvm.mk +++ b/package/llvm-project/llvm/llvm.mk @@ -4,9 +4,8 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -LLVM_VERSION = 11.1.0 -LLVM_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_VERSION) +LLVM_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_SITE = $(LLVM_PROJECT_SITE) LLVM_SOURCE = llvm-$(LLVM_VERSION).src.tar.xz LLVM_LICENSE = Apache-2.0 with exceptions LLVM_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:07:02 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:07:02 +0000 Subject: [Buildroot] [PATCH v2 03/11] package/lld: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 2 +- package/Config.in.host | 2 +- package/{ => llvm-project}/lld/Config.in.host | 0 package/{ => llvm-project}/lld/lld.hash | 0 package/{ => llvm-project}/lld/lld.mk | 5 ++--- 5 files changed, 4 insertions(+), 5 deletions(-) rename package/{ => llvm-project}/lld/Config.in.host (100%) rename package/{ => llvm-project}/lld/lld.hash (100%) rename package/{ => llvm-project}/lld/lld.mk (87%) diff --git a/DEVELOPERS b/DEVELOPERS index 8763fde182..d4bab1aa36 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1609,7 +1609,7 @@ F: package/clang/ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ -F: package/lld/ +F: package/llvm-project/lld/ F: package/llvm-project/llvm/ F: package/python-cython/ F: package/python-pycups/ diff --git a/package/Config.in.host b/package/Config.in.host index 8ccbf40a84..60ec97a39c 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -50,7 +50,7 @@ menu "Host utilities" source "package/jsmin/Config.in.host" source "package/kmod/Config.in.host" source "package/libp11/Config.in.host" - source "package/lld/Config.in.host" + source "package/llvm-project/lld/Config.in.host" source "package/lpc3250loader/Config.in.host" source "package/lttng-babeltrace/Config.in.host" source "package/lzma-alone/Config.in.host" diff --git a/package/lld/Config.in.host b/package/llvm-project/lld/Config.in.host similarity index 100% rename from package/lld/Config.in.host rename to package/llvm-project/lld/Config.in.host diff --git a/package/lld/lld.hash b/package/llvm-project/lld/lld.hash similarity index 100% rename from package/lld/lld.hash rename to package/llvm-project/lld/lld.hash diff --git a/package/lld/lld.mk b/package/llvm-project/lld/lld.mk similarity index 87% rename from package/lld/lld.mk rename to package/llvm-project/lld/lld.mk index 4bf903cda0..46ec3b13ff 100644 --- a/package/lld/lld.mk +++ b/package/llvm-project/lld/lld.mk @@ -4,9 +4,8 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -LLD_VERSION = 11.1.0 -LLD_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLD_VERSION) +LLD_VERSION = $(LLVM_PROJECT_VERSION) +LLD_SITE = $(LLVM_PROJECT_SITE) LLD_SOURCE = lld-$(LLD_VERSION).src.tar.xz LLD_LICENSE = Apache-2.0 with exceptions LLD_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:07:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:07:54 +0000 Subject: [Buildroot] [PATCH v2 04/11] package/clang: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 6 +++--- package/Config.in | 2 +- ...-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch | 0 package/{ => llvm-project}/clang/Config.in | 0 package/{ => llvm-project}/clang/clang.hash | 0 package/{ => llvm-project}/clang/clang.mk | 7 +++---- package/llvm-project/llvm-project.mk | 3 ++- 7 files changed, 9 insertions(+), 9 deletions(-) rename package/{ => llvm-project}/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch (100%) rename package/{ => llvm-project}/clang/Config.in (100%) rename package/{ => llvm-project}/clang/clang.hash (100%) rename package/{ => llvm-project}/clang/clang.mk (96%) diff --git a/DEVELOPERS b/DEVELOPERS index d4bab1aa36..d516f585d8 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1605,10 +1605,10 @@ F: support/testing/tests/package/test_python_aexpect.py N: Joseph Kogut F: package/at-spi2-atk/ F: package/at-spi2-core/ -F: package/clang/ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ +F: package/llvm-project/clang/ F: package/llvm-project/lld/ F: package/llvm-project/llvm/ F: package/python-cython/ @@ -2525,7 +2525,6 @@ F: package/alure/ F: package/aubio/ F: package/binutils/ F: package/bullet/ -F: package/clang/ F: package/clinfo/ F: package/efl/ F: package/enet/ @@ -2544,6 +2543,7 @@ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ +F: package/llvm-project/clang/ F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ @@ -2953,9 +2953,9 @@ F: package/gettext-tiny/ F: package/tinyssh/ N: Valentin Korenblit -F: package/clang/ F: package/clinfo/ F: package/libclc/ +F: package/llvm-project/clang/ F: package/llvm-project/llvm/ N: Vanya Sergeev diff --git a/package/Config.in b/package/Config.in index 3b7d4a9448..15dd27796f 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1970,7 +1970,7 @@ menu "Other" source "package/capnproto/Config.in" source "package/cctz/Config.in" source "package/cereal/Config.in" - source "package/clang/Config.in" + source "package/llvm-project/clang/Config.in" source "package/cmocka/Config.in" source "package/compiler-rt/Config.in" source "package/cppcms/Config.in" diff --git a/package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch b/package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch similarity index 100% rename from package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch rename to package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch diff --git a/package/clang/Config.in b/package/llvm-project/clang/Config.in similarity index 100% rename from package/clang/Config.in rename to package/llvm-project/clang/Config.in diff --git a/package/clang/clang.hash b/package/llvm-project/clang/clang.hash similarity index 100% rename from package/clang/clang.hash rename to package/llvm-project/clang/clang.hash diff --git a/package/clang/clang.mk b/package/llvm-project/clang/clang.mk similarity index 96% rename from package/clang/clang.mk rename to package/llvm-project/clang/clang.mk index 3c75f8d6b1..0943e21a8c 100644 --- a/package/clang/clang.mk +++ b/package/llvm-project/clang/clang.mk @@ -4,10 +4,9 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -CLANG_VERSION_MAJOR = 11 -CLANG_VERSION = $(CLANG_VERSION_MAJOR).1.0 -CLANG_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(CLANG_VERSION) +CLANG_VERSION_MAJOR = $(LLVM_PROJECT_VERSION_MAJOR) +CLANG_VERSION = $(LLVM_PROJECT_VERSION) +CLANG_SITE = $(LLVM_PROJECT_SITE) CLANG_SOURCE = clang-$(CLANG_VERSION).src.tar.xz CLANG_LICENSE = Apache-2.0 with exceptions CLANG_LICENSE_FILES = LICENSE.TXT diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk index 7ba89bb605..747a6f5647 100644 --- a/package/llvm-project/llvm-project.mk +++ b/package/llvm-project/llvm-project.mk @@ -4,7 +4,8 @@ # ################################################################################ -LLVM_PROJECT_VERSION = 11.1.0 +LLVM_PROJECT_VERSION_MAJOR = 11 +LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).1.0 LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) include $(sort $(wildcard package/llvm-project/*/*.mk)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:08:34 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:08:34 +0000 Subject: [Buildroot] [PATCH v2 05/11] package/compiler-rt: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 2 +- package/Config.in | 2 +- package/{ => llvm-project}/compiler-rt/Config.in | 0 package/{ => llvm-project}/compiler-rt/compiler-rt.hash | 0 package/{ => llvm-project}/compiler-rt/compiler-rt.mk | 6 ++---- 5 files changed, 4 insertions(+), 6 deletions(-) rename package/{ => llvm-project}/compiler-rt/Config.in (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.hash (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.mk (85%) diff --git a/DEVELOPERS b/DEVELOPERS index d516f585d8..e6606408c0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1966,7 +1966,6 @@ F: package/bridge-utils/ F: package/checkpolicy/ F: package/checksec/ F: package/cgroupfs-mount/ -F: package/compiler-rt/ F: package/crda/ F: package/cunit/ F: package/dacapo/ @@ -2004,6 +2003,7 @@ F: package/libssh2/ F: package/libtalloc/ F: package/libqmi/ F: package/lighttpd/ +F: package/llvm-project/compiler-rt/ F: package/logrotate/ F: package/makedevs/ F: package/memtester/ diff --git a/package/Config.in b/package/Config.in index 15dd27796f..1d48b1448b 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1972,7 +1972,7 @@ menu "Other" source "package/cereal/Config.in" source "package/llvm-project/clang/Config.in" source "package/cmocka/Config.in" - source "package/compiler-rt/Config.in" + source "package/llvm-project/compiler-rt/Config.in" source "package/cppcms/Config.in" source "package/cracklib/Config.in" source "package/dawgdic/Config.in" diff --git a/package/compiler-rt/Config.in b/package/llvm-project/compiler-rt/Config.in similarity index 100% rename from package/compiler-rt/Config.in rename to package/llvm-project/compiler-rt/Config.in diff --git a/package/compiler-rt/compiler-rt.hash b/package/llvm-project/compiler-rt/compiler-rt.hash similarity index 100% rename from package/compiler-rt/compiler-rt.hash rename to package/llvm-project/compiler-rt/compiler-rt.hash diff --git a/package/compiler-rt/compiler-rt.mk b/package/llvm-project/compiler-rt/compiler-rt.mk similarity index 85% rename from package/compiler-rt/compiler-rt.mk rename to package/llvm-project/compiler-rt/compiler-rt.mk index c8ea86e899..84add60801 100644 --- a/package/compiler-rt/compiler-rt.mk +++ b/package/llvm-project/compiler-rt/compiler-rt.mk @@ -4,11 +4,9 @@ # ################################################################################ -# Compiler-RT should be bumped together with LLVM and Clang as the run-time is -# tied to the version of those tools -COMPILER_RT_VERSION = 11.1.0 +COMPILER_RT_VERSION = $(LLVM_PROJECT_VERSION) COMPILER_RT_SOURCE = compiler-rt-$(COMPILER_RT_VERSION).src.tar.xz -COMPILER_RT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(COMPILER_RT_VERSION) +COMPILER_RT_SITE = $(LLVM_PROJECT_SITE) COMPILER_RT_LICENSE = NCSA MIT COMPILER_RT_LICENSE_FILES = LICENSE.TXT COMPILER_RT_DEPENDENCIES = host-clang llvm -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:09:17 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:09:17 +0000 Subject: [Buildroot] [PATCH v2 06/11] package/llvm-project/llvm-cmake: new package Message-ID: This is a small host package containing shared cmake modules that are needed by various projects during configuration. For example llvm 15 needs it. Signed-off-by: Daniel Lang --- package/llvm-project/llvm-cmake/llvm-cmake.hash | 2 ++ package/llvm-project/llvm-cmake/llvm-cmake.mk | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.hash create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.mk diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.hash b/package/llvm-project/llvm-cmake/llvm-cmake.hash new file mode 100644 index 0000000000..b76013e810 --- /dev/null +++ b/package/llvm-project/llvm-cmake/llvm-cmake.hash @@ -0,0 +1,2 @@ +# locally calculated +sha256 21cf3f52c53dc8b8972122ae35a5c18de09c7df693b48b5cd8553c3e3fed090d cmake-15.0.3.src.tar.xz diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.mk b/package/llvm-project/llvm-cmake/llvm-cmake.mk new file mode 100644 index 0000000000..2527b95063 --- /dev/null +++ b/package/llvm-project/llvm-cmake/llvm-cmake.mk @@ -0,0 +1,16 @@ +################################################################################ +# +# llvm-cmake +# +################################################################################ + +LLVM_CMAKE_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_CMAKE_SITE = $(LLVM_PROJECT_SITE) +LLVM_CMAKE_SOURCE = cmake-$(LLVM_CMAKE_VERSION).src.tar.xz + +define HOST_LLVM_CMAKE_INSTALL_CMDS + mkdir -p $(HOST_DIR)/lib/cmake/llvm + cp -Rv $(@D)/Modules/* $(HOST_DIR)/lib/cmake/llvm +endef + +$(eval $(host-generic-package)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:10:16 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:10:16 +0000 Subject: [Buildroot] [PATCH v2 07/11] package/llvm-project/llvm-libunwind: new package Message-ID: Starting with version 15, lld needs the llvm implementation of libunwind, therefore it is added as a host package. Signed-off-by: Daniel Lang --- .../llvm-libunwind/llvm-libunwind.hash | 3 +++ .../llvm-libunwind/llvm-libunwind.mk | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.hash create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.mk diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash new file mode 100644 index 0000000000..2d6286a40e --- /dev/null +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash @@ -0,0 +1,3 @@ +# locally computed +sha256 0ab6e07bf05359e242e9ea80e4089b819914867fa997a715e324e584bcfdf114 libunwind-15.0.3.src.tar.xz +sha256 b5efebcaca80879234098e52d1725e6d9eb8fb96a19fce625d39184b705f7b6d LICENSE.TXT diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.mk b/package/llvm-project/llvm-libunwind/llvm-libunwind.mk new file mode 100644 index 0000000000..be9965a49a --- /dev/null +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# llvm-libunwind +# +################################################################################ + +LLVM_LIBUNWIND_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_LIBUNWIND_SITE = $(LLVM_PROJECT_SITE) +LLVM_LIBUNWIND_SOURCE = libunwind-$(LLVM_LIBUNWIND_VERSION).src.tar.xz +LLVM_LIBUNWIND_LICENSE = Apache-2.0 with exceptions +LLVM_LIBUNWIND_LICENSE_FILES = LICENSE.TXT +LLVM_LIBUNWIND_SUPPORTS_IN_SOURCE_BUILD = NO + +HOST_LLVM_LIBUNWIND_CONF_OPTS += \ + -DCMAKE_MODULE_PATH="$(HOST_DIR)/lib/cmake/llvm" \ + -DLIBUNWIND_INSTALL_HEADERS=ON + +$(eval $(host-cmake-package)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:12:02 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:12:02 +0000 Subject: [Buildroot] [PATCH v2 08/11] package/llvm-project: bump to version 15.0.3 Message-ID: - Add new build dependencies to lld and llvm - Drop old config options Signed-off-by: Daniel Lang --- Changes v1 -> v2: - Bump to 15.0.3 instead of 15.0.1 - llvm: use CMAKE_HOST_C_COMPILER instead of HOSTCC --- package/llvm-project/clang/clang.hash | 2 +- package/llvm-project/clang/clang.mk | 8 +------ .../llvm-project/compiler-rt/compiler-rt.hash | 2 +- .../llvm-project/compiler-rt/compiler-rt.mk | 3 ++- package/llvm-project/lld/lld.hash | 2 +- package/llvm-project/lld/lld.mk | 8 +------ .../llvm-project/llvm-cmake/llvm-cmake.hash | 2 +- .../llvm-libunwind/llvm-libunwind.hash | 2 +- package/llvm-project/llvm-project.mk | 4 ++-- .../llvm/0001-nfc-Fix-missing-include.patch | 24 ------------------- package/llvm-project/llvm/llvm.hash | 2 +- package/llvm-project/llvm/llvm.mk | 21 +++++++++------- 12 files changed, 24 insertions(+), 56 deletions(-) delete mode 100644 package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch diff --git a/package/llvm-project/clang/clang.hash b/package/llvm-project/clang/clang.hash index 0136b80664..52c755cfb3 100644 --- a/package/llvm-project/clang/clang.hash +++ b/package/llvm-project/clang/clang.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 0a8288f065d1f57cb6d96da4d2965cbea32edc572aa972e466e954d17148558b clang-11.1.0.src.tar.xz +sha256 96036052694e703d159c995bda203b59d1ff185c6879189b9eba837726e1738c clang-15.0.3.src.tar.xz sha256 ebcd9bbf783a73d05c53ba4d586b8d5813dcdf3bbec50265860ccc885e606f47 LICENSE.TXT diff --git a/package/llvm-project/clang/clang.mk b/package/llvm-project/clang/clang.mk index 0943e21a8c..0bafd6461b 100644 --- a/package/llvm-project/clang/clang.mk +++ b/package/llvm-project/clang/clang.mk @@ -17,13 +17,6 @@ CLANG_INSTALL_STAGING = YES HOST_CLANG_DEPENDENCIES = host-llvm host-libxml2 CLANG_DEPENDENCIES = llvm host-clang -# LLVM >= 9.0 will soon require C++14 support, building llvm 8.x using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_CLANG_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON -CLANG_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON - # This option is needed, otherwise multiple shared libs # (libclangAST.so, libclangBasic.so, libclangFrontend.so, etc.) will # be generated. As a final shared lib containing all these components @@ -62,6 +55,7 @@ CLANG_CONF_OPTS += \ HOST_CLANG_CONF_OPTS += -DLLVM_DIR=$(HOST_DIR)/lib/cmake/llvm \ -DCLANG_DEFAULT_LINKER=$(TARGET_LD) CLANG_CONF_OPTS += -DLLVM_DIR=$(STAGING_DIR)/usr/lib/cmake/llvm \ + -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm \ -DCLANG_TABLEGEN:FILEPATH=$(HOST_DIR)/bin/clang-tblgen \ -DLLVM_TABLEGEN_EXE:FILEPATH=$(HOST_DIR)/bin/llvm-tblgen diff --git a/package/llvm-project/compiler-rt/compiler-rt.hash b/package/llvm-project/compiler-rt/compiler-rt.hash index 8ee010ac5a..fe4e98164b 100644 --- a/package/llvm-project/compiler-rt/compiler-rt.hash +++ b/package/llvm-project/compiler-rt/compiler-rt.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 def1fc00c764cd3abbba925c712ac38860a756a43b696b291f46fee09e453274 compiler-rt-11.1.0.src.tar.xz +sha256 db958eee92d1571d8b7f76c1be8513817f1a888dcf6ced88aca871acfb0eeddd compiler-rt-15.0.3.src.tar.xz sha256 1a8f1058753f1ba890de984e48f0242a3a5c29a6a8f2ed9fd813f36985387e8d LICENSE.TXT diff --git a/package/llvm-project/compiler-rt/compiler-rt.mk b/package/llvm-project/compiler-rt/compiler-rt.mk index 84add60801..026650c7c8 100644 --- a/package/llvm-project/compiler-rt/compiler-rt.mk +++ b/package/llvm-project/compiler-rt/compiler-rt.mk @@ -17,7 +17,8 @@ COMPILER_RT_INSTALL_TARGET = NO COMPILER_RT_CONF_OPTS=-DCOMPILER_RT_STANDALONE_BUILD=OFF \ -DCOMPILER_RT_STANDALONE_BUILD=ON \ -DCOMPILER_RT_DEFAULT_TARGET_TRIPLE=$(GNU_TARGET_NAME) \ - -DLLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config + -DLLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config \ + -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm # The installation of the target runtime libraries defaults to DESTDIR, however # host-clang resources directory needs a link so Clang can find the runtime diff --git a/package/llvm-project/lld/lld.hash b/package/llvm-project/lld/lld.hash index 6d56ffcaab..2d2598dbeb 100644 --- a/package/llvm-project/lld/lld.hash +++ b/package/llvm-project/lld/lld.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 017a788cbe1ecc4a949abf10755870519086d058a2e99f438829aef24f0c66ce lld-11.1.0.src.tar.xz +sha256 cd5d0894a74b957ce78d62212c1df0b3876a7297593aaece6b0512285e3b8732 lld-15.0.3.src.tar.xz sha256 f7891568956e34643eb6a0db1462db30820d40d7266e2a78063f2fe233ece5a0 LICENSE.TXT diff --git a/package/llvm-project/lld/lld.mk b/package/llvm-project/lld/lld.mk index 46ec3b13ff..539dd0bd71 100644 --- a/package/llvm-project/lld/lld.mk +++ b/package/llvm-project/lld/lld.mk @@ -10,13 +10,7 @@ LLD_SOURCE = lld-$(LLD_VERSION).src.tar.xz LLD_LICENSE = Apache-2.0 with exceptions LLD_LICENSE_FILES = LICENSE.TXT LLD_SUPPORTS_IN_SOURCE_BUILD = NO -HOST_LLD_DEPENDENCIES = host-llvm - -# LLVM > 9.0 will soon require C++14 support, building llvm <= 9.0 using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_LLD_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON +HOST_LLD_DEPENDENCIES = host-llvm host-llvm-libunwind # build as static libs as is done in llvm & clang HOST_LLD_CONF_OPTS += -DBUILD_SHARED_LIBS=OFF diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.hash b/package/llvm-project/llvm-cmake/llvm-cmake.hash index b76013e810..862c5d92e8 100644 --- a/package/llvm-project/llvm-cmake/llvm-cmake.hash +++ b/package/llvm-project/llvm-cmake/llvm-cmake.hash @@ -1,2 +1,2 @@ # locally calculated -sha256 a660d1b7d4d2ef9759de6ad360d5fa9eed3625a6548068a97df2dd706edf2dd0 cmake-15.0.1.src.tar.xz +sha256 21cf3f52c53dc8b8972122ae35a5c18de09c7df693b48b5cd8553c3e3fed090d cmake-15.0.3.src.tar.xz diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash index 2d6286a40e..86775f5dba 100644 --- a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash @@ -1,3 +1,3 @@ # locally computed -sha256 65af59d7cd4672e2c1793402968f803beb3f91a92ad95f8702610a9a07a5ca10 libunwind-15.0.1.src.tar.xz +sha256 0ab6e07bf05359e242e9ea80e4089b819914867fa997a715e324e584bcfdf114 libunwind-15.0.3.src.tar.xz sha256 b5efebcaca80879234098e52d1725e6d9eb8fb96a19fce625d39184b705f7b6d LICENSE.TXT diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk index 747a6f5647..5859ff7cfc 100644 --- a/package/llvm-project/llvm-project.mk +++ b/package/llvm-project/llvm-project.mk @@ -4,8 +4,8 @@ # ################################################################################ -LLVM_PROJECT_VERSION_MAJOR = 11 -LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).1.0 +LLVM_PROJECT_VERSION_MAJOR = 15 +LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).0.3 LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) include $(sort $(wildcard package/llvm-project/*/*.mk)) diff --git a/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch b/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch deleted file mode 100644 index 62111ca138..0000000000 --- a/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch +++ /dev/null @@ -1,24 +0,0 @@ -From b498303066a63a203d24f739b2d2e0e56dca70d1 Mon Sep 17 00:00:00 2001 -From: serge-sans-paille -Date: Tue, 10 Nov 2020 14:55:25 +0100 -Subject: [PATCH] [nfc] Fix missing include - -[Retrieved (and backported) from: -https://github.com/llvm/llvm-project/commit/b498303066a63a203d24f739b2d2e0e56dca70d1] -Signed-off-by: Fabrice Fontaine ---- - llvm/utils/benchmark/src/benchmark_register.h | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/utils/benchmark/src/benchmark_register.h b/utils/benchmark/src/benchmark_register.h -index 0705e219f2fa2..4caa5ad4da079 100644 ---- a/utils/benchmark/src/benchmark_register.h -+++ b/utils/benchmark/src/benchmark_register.h -@@ -1,6 +1,7 @@ - #ifndef BENCHMARK_REGISTER_H - #define BENCHMARK_REGISTER_H - -+#include - #include - - #include "check.h" diff --git a/package/llvm-project/llvm/llvm.hash b/package/llvm-project/llvm/llvm.hash index e7f79492de..df9aa88411 100644 --- a/package/llvm-project/llvm/llvm.hash +++ b/package/llvm-project/llvm/llvm.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 ce8508e318a01a63d4e8b3090ab2ded3c598a50258cc49e2625b9120d4c03ea5 llvm-11.1.0.src.tar.xz +sha256 c39aec729662416dcbf0bfe53a9786b34e7d93d02908a0779a2f6d83ad0a4a27 llvm-15.0.3.src.tar.xz sha256 8d85c1057d742e597985c7d4e6320b015a9139385cff4cbae06ffc0ebe89afee LICENSE.TXT diff --git a/package/llvm-project/llvm/llvm.mk b/package/llvm-project/llvm/llvm.mk index 1adad17b16..5751ba4f7f 100644 --- a/package/llvm-project/llvm/llvm.mk +++ b/package/llvm-project/llvm/llvm.mk @@ -14,15 +14,16 @@ LLVM_SUPPORTS_IN_SOURCE_BUILD = NO LLVM_INSTALL_STAGING = YES # LLVM >= 9.0 can use python3 to build. -HOST_LLVM_DEPENDENCIES = host-python3 +HOST_LLVM_DEPENDENCIES = host-python3 host-llvm-cmake LLVM_DEPENDENCIES = host-llvm -# LLVM >= 9.0 will soon require C++14 support, building llvm 8.x using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_LLVM_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON -LLVM_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON +# Path to cmake modules from host-llvm-cmake +HOST_LLVM_CONF_OPTS += -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm +LLVM_CONF_OPTS += -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm + +# Assembly files for x64 in lib/Support/BLAKE3 need to be compiled +# by a C compiler +HOST_LLVM_CONF_OPTS += -DCMAKE_ASM_COMPILER="$(CMAKE_HOST_C_COMPILER)" # Don't build clang libcxx libcxxabi lldb compiler-rt lld polly as llvm subprojects # This flag assumes that projects are checked out side-by-side and not nested @@ -259,7 +260,8 @@ HOST_LLVM_CONF_OPTS += \ -DLLVM_INCLUDE_EXAMPLES=OFF \ -DLLVM_INCLUDE_DOCS=OFF \ -DLLVM_INCLUDE_GO_TESTS=OFF \ - -DLLVM_INCLUDE_TESTS=OFF + -DLLVM_INCLUDE_TESTS=OFF \ + -DLLVM_INCLUDE_BENCHMARKS=OFF LLVM_CONF_OPTS += \ -DLLVM_BUILD_EXAMPLES=OFF \ -DLLVM_BUILD_DOCS=OFF \ @@ -270,7 +272,8 @@ LLVM_CONF_OPTS += \ -DLLVM_INCLUDE_EXAMPLES=OFF \ -DLLVM_INCLUDE_DOCS=OFF \ -DLLVM_INCLUDE_GO_TESTS=OFF \ - -DLLVM_INCLUDE_TESTS=OFF + -DLLVM_INCLUDE_TESTS=OFF \ + -DLLVM_INCLUDE_BENCHMARKS=OFF # Copy llvm-config (host variant) to STAGING_DIR # llvm-config (host variant) returns include and lib directories -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:13:19 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:13:19 +0000 Subject: [Buildroot] [PATCH v2 09/11] package/spirv-llvm-translator: bump to version 15.0.0-2 Message-ID: Signed-off-by: Daniel Lang --- Changes v1 -> v2: - Bump to latest commit that supports llvm15 --- package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- package/spirv-llvm-translator/spirv-llvm-translator.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash index edfca1ea02..0e06d36de1 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz +sha256 c2b29bc495fe14a21e871481b5a25d7abed93df8fa3fc22e996e39d9c1373280 spirv-llvm-translator-v15.0.0-2-g2478920a91bff5c59ca65ea9bce8ffaa5af8fa88.tar.gz sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk index 159f7d3b52..d920999b28 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk @@ -5,8 +5,8 @@ ################################################################################ # Generate version string using: -# git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 +# git describe --tags --match 'v15*' --abbrev=40 origin/llvm_release_150 +SPIRV_LLVM_TRANSLATOR_VERSION = v15.0.0-2-g2478920a91bff5c59ca65ea9bce8ffaa5af8fa88 SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:13:56 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:13:56 +0000 Subject: [Buildroot] [PATCH v2 10/11] package/libclc: move to llvm-project subfolder and bump to 15.0.3 Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - libclc: Add missing change to package/Config.in - Bump to 15.0.3 instead of 15.0.1 --- DEVELOPERS | 4 ++-- package/Config.in | 2 +- .../libclc/0001-support-out-of-tree-build.patch | 0 package/{ => llvm-project}/libclc/Config.in | 0 package/{ => llvm-project}/libclc/libclc.hash | 2 +- package/{ => llvm-project}/libclc/libclc.mk | 4 ++-- 6 files changed, 6 insertions(+), 6 deletions(-) rename package/{ => llvm-project}/libclc/0001-support-out-of-tree-build.patch (100%) rename package/{ => llvm-project}/libclc/Config.in (100%) rename package/{ => llvm-project}/libclc/libclc.hash (51%) rename package/{ => llvm-project}/libclc/libclc.mk (92%) diff --git a/DEVELOPERS b/DEVELOPERS index e6606408c0..6dbf4fe7a5 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2538,12 +2538,12 @@ F: package/irrlicht/ F: package/liblinear/ F: package/lensfun/ F: package/libbpf/ -F: package/libclc/ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ F: package/llvm-project/clang/ +F: package/llvm-project/libclc/ F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ @@ -2954,8 +2954,8 @@ F: package/tinyssh/ N: Valentin Korenblit F: package/clinfo/ -F: package/libclc/ F: package/llvm-project/clang/ +F: package/llvm-project/libclc/ F: package/llvm-project/llvm/ N: Vanya Sergeev diff --git a/package/Config.in b/package/Config.in index 1d48b1448b..882e296533 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2010,7 +2010,7 @@ menu "Other" source "package/libcap/Config.in" source "package/libcap-ng/Config.in" source "package/libcgroup/Config.in" - source "package/libclc/Config.in" + source "package/llvm-project/libclc/Config.in" source "package/libcofi/Config.in" source "package/libcorrect/Config.in" source "package/libcrossguid/Config.in" diff --git a/package/libclc/0001-support-out-of-tree-build.patch b/package/llvm-project/libclc/0001-support-out-of-tree-build.patch similarity index 100% rename from package/libclc/0001-support-out-of-tree-build.patch rename to package/llvm-project/libclc/0001-support-out-of-tree-build.patch diff --git a/package/libclc/Config.in b/package/llvm-project/libclc/Config.in similarity index 100% rename from package/libclc/Config.in rename to package/llvm-project/libclc/Config.in diff --git a/package/libclc/libclc.hash b/package/llvm-project/libclc/libclc.hash similarity index 51% rename from package/libclc/libclc.hash rename to package/llvm-project/libclc/libclc.hash index c496291d81..7140884f6c 100644 --- a/package/libclc/libclc.hash +++ b/package/llvm-project/libclc/libclc.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 8f0213e52e2fcaca3dfcc438f05d0e15e9b3c96fd6b0994a802b267dc1047a1d libclc-13.0.1.src.tar.xz +sha256 07e8a2b31e07a8cc8a976a6bfd87797d2543d5a9530f449755bf5119acbdbe8e libclc-15.0.3.src.tar.xz sha256 3c536c052db9afd997809e38785c9f2a9e54e2892330fa7c5b438e18a7413479 LICENSE.TXT diff --git a/package/libclc/libclc.mk b/package/llvm-project/libclc/libclc.mk similarity index 92% rename from package/libclc/libclc.mk rename to package/llvm-project/libclc/libclc.mk index 5d246cf4f8..9f303d6d2f 100644 --- a/package/libclc/libclc.mk +++ b/package/llvm-project/libclc/libclc.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBCLC_VERSION = 13.0.1 -LIBCLC_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LIBCLC_VERSION) +LIBCLC_VERSION = $(LLVM_PROJECT_VERSION) +LIBCLC_SITE = $(LLVM_PROJECT_SITE) LIBCLC_SOURCE = libclc-$(LIBCLC_VERSION).src.tar.xz LIBCLC_LICENSE = Apache-2.0 with exceptions or MIT LIBCLC_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:14:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:14:54 +0000 Subject: [Buildroot] [PATCH v2 11/11] DEVELOPERS: add Daniel Lang for llvm-project Message-ID: >From 709898d42f115a5403f54d3fb0dd04e1d5ee087d Mon Sep 17 00:00:00 2001 From: Daniel Lang Date: Wed, 28 Sep 2022 16:02:38 +0200 Subject: [PATCH v2 11/11] DEVELOPERS: add Daniel Lang for llvm-project Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 6dbf4fe7a5..19d584015f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -633,6 +633,7 @@ F: package/dacapo/ N: Daniel Lang F: package/dbus-cxx/ F: package/paho-mqtt-cpp/ +F: package/llvm-project/ N: Damien Lanson F: package/libvdpau/ -- 2.25.1 From afshin.nasser at gmail.com Tue Oct 25 06:53:56 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Tue, 25 Oct 2022 10:23:56 +0330 Subject: [Buildroot] [PATCH] python-wheel: new package Message-ID: <20221025065356.1838-1-afshin.nasser@gmail.com> Signed-off-by: Nasser Afshin --- package/Config.in | 1 + package/python-wheel/Config.in | 15 +++++++++++++++ package/python-wheel/python-wheel.hash | 5 +++++ package/python-wheel/python-wheel.mk | 14 ++++++++++++++ 4 files changed, 35 insertions(+) create mode 100644 package/python-wheel/Config.in create mode 100644 package/python-wheel/python-wheel.hash create mode 100644 package/python-wheel/python-wheel.mk diff --git a/package/Config.in b/package/Config.in index b60e7700ad..56b1a08d8b 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1062,6 +1062,7 @@ menu "External python modules" source "package/python-websocket-client/Config.in" source "package/python-websockets/Config.in" source "package/python-werkzeug/Config.in" + source "package/python-wheel/Config.in" source "package/python-whoosh/Config.in" source "package/python-wrapt/Config.in" source "package/python-ws4py/Config.in" diff --git a/package/python-wheel/Config.in b/package/python-wheel/Config.in new file mode 100644 index 0000000000..225d7529a4 --- /dev/null +++ b/package/python-wheel/Config.in @@ -0,0 +1,15 @@ +config BR2_PACKAGE_PYTHON_WHEEL + bool "python-wheel" + help + This library is the reference implementation of the Python wheel + packaging standard, as defined in PEP 427. + + It has two different roles: + 1. A setuptools extension for building wheels that provides the bdist_wheel + setuptools command + 2. A command line tool for working with wheel files + + It should be noted that wheel is not intended to be used as a library, and as + such there is no stable, public API. + + https://github.com/pypa/wheel diff --git a/package/python-wheel/python-wheel.hash b/package/python-wheel/python-wheel.hash new file mode 100644 index 0000000000..be82f63a30 --- /dev/null +++ b/package/python-wheel/python-wheel.hash @@ -0,0 +1,5 @@ +# md5 from https://pypi.python.org/pypi/wheel/json +md5 f490f1399e5903706cb1d4fbed9ecb28 wheel-0.37.1.tar.gz +# Locally computed +sha256 e9a504e793efbca1b8e0e9cb979a249cf4a0a7b5b8c9e8b65a5e39d49529c1c4 wheel-0.37.1.tar.gz +sha256 cca9e20c6af1fcfbf69408f377769286cbeebcded336100c9b4a3f35fbe635e4 LICENSE.txt diff --git a/package/python-wheel/python-wheel.mk b/package/python-wheel/python-wheel.mk new file mode 100644 index 0000000000..d8fab54867 --- /dev/null +++ b/package/python-wheel/python-wheel.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-wheel +# +################################################################################ + +PYTHON_WHEEL_VERSION = 0.37.1 +PYTHON_WHEEL_SOURCE = wheel-$(PYTHON_WHEEL_VERSION).tar.gz +PYTHON_WHEEL_SITE = https://files.pythonhosted.org/packages/c0/6c/9f840c2e55b67b90745af06a540964b73589256cb10cc10057c87ac78fc2 +PYTHON_WHEEL_SETUP_TYPE = distutils +PYTHON_WHEEL_LICENSE = MIT +PYTHON_WHEEL_LICENSE_FILES = LICENSE.txt + +$(eval $(python-package)) -- 2.17.1 From afshin.nasser at gmail.com Tue Oct 25 06:55:39 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Tue, 25 Oct 2022 10:25:39 +0330 Subject: [Buildroot] [PATCH] python-pycrate: new package Message-ID: <20221025065539.4646-1-afshin.nasser@gmail.com> Signed-off-by: Nasser Afshin --- package/Config.in | 1 + package/python-pycrate/Config.in | 8 ++++++++ package/python-pycrate/python-pycrate.hash | 4 ++++ package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ 4 files changed, 26 insertions(+) create mode 100644 package/python-pycrate/Config.in create mode 100644 package/python-pycrate/python-pycrate.hash create mode 100644 package/python-pycrate/python-pycrate.mk diff --git a/package/Config.in b/package/Config.in index 56b1a08d8b..2443b7bb27 100644 --- a/package/Config.in +++ b/package/Config.in @@ -951,6 +951,7 @@ menu "External python modules" source "package/python-pyasn1-modules/Config.in" source "package/python-pycli/Config.in" source "package/python-pycparser/Config.in" + source "package/python-pycrate/Config.in" source "package/python-pycrypto/Config.in" source "package/python-pycryptodomex/Config.in" source "package/python-pydal/Config.in" diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in new file mode 100644 index 0000000000..9e2123d4dd --- /dev/null +++ b/package/python-pycrate/Config.in @@ -0,0 +1,8 @@ +config BR2_PACKAGE_PYTHON_PYCRATE + bool "python-pycrate" + help + It provides basically a runtime for encoding and decoding data structures, + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core + network. + + https://github.com/P1sec/pycrate/ diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash new file mode 100644 index 0000000000..24aa51d8e4 --- /dev/null +++ b/package/python-pycrate/python-pycrate.hash @@ -0,0 +1,4 @@ +# md5 from https://pypi.python.org/pypi/pycrate/json +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz +# Locally computed +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk new file mode 100644 index 0000000000..41ce6c18f2 --- /dev/null +++ b/package/python-pycrate/python-pycrate.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# python-pycrate +# +################################################################################ + +PYTHON_PYCRATE_VERSION = 0.5.5 +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df +PYTHON_PYCRATE_SETUP_TYPE = distutils +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later + +$(eval $(python-package)) -- 2.17.1 From sebastien.szymanski at armadeus.com Tue Oct 25 07:16:34 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Tue, 25 Oct 2022 09:16:34 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221025071634.8563-1-sebastien.szymanski@armadeus.com> Drop patch 0001 as it is not needed anymore: https://github.com/cenobites/flask-jsonrpc/commit/2426b7f6fabeef9eb3a8dc6570e2fce33a30f98e Signed-off-by: S?bastien Szymanski --- ...-Move-pytest-runner-to-tests_require.patch | 32 ------------------- .../python-flask-jsonrpc.hash | 4 +-- .../python-flask-jsonrpc.mk | 4 +-- 3 files changed, 4 insertions(+), 36 deletions(-) delete mode 100644 package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch diff --git a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch b/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch deleted file mode 100644 index 8b6712e601..0000000000 --- a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 8f07768085fa4c8d21dbe27805b7238e67d3aea5 Mon Sep 17 00:00:00 2001 -From: James Hilliard -Date: Tue, 17 May 2022 15:52:58 -0600 -Subject: [PATCH] Move pytest-runner to tests_require - -This isn't a build requirement so it shouldn't be under -setup_requires. - -Signed-off-by: James Hilliard -[Upstream status: -https://github.com/cenobites/flask-jsonrpc/pull/227] ---- - setup.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 197d6c9..f23c472 100755 ---- a/setup.py -+++ b/setup.py -@@ -42,8 +42,8 @@ setuptools.setup( - 'async': ['Flask[async]>=1.0.0,<3.0'], - 'dotenv': ['Flask[dotenv]>=1.0.0,<3.0'], - }, -- setup_requires=['pytest-runner'], - tests_require=[ -+ 'pytest-runner', - 'mock==4.0.3', - 'coverage==6.3.2;python_version>"3.6"', - 'coverage<6.2;python_version<="3.6"', --- -2.36.0 - diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools -- 2.37.4 From angelo at amarulasolutions.com Tue Oct 25 07:33:06 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 25 Oct 2022 09:33:06 +0200 Subject: [Buildroot] QT6 Qmake Message-ID: Hello Jesse, I was trying to port qt6knx to qt6, the project is not converted to cmake but still based on qmake. I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is somewhat broken, the following snip shows the differences between qmake for QT5 and QT6: angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake -query QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_PREFIX/raw:/usr QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_ARCHDATA/raw:/usr QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_DATA/raw:/usr QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc QT_INSTALL_DOCS/raw:/usr/doc QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 QT_INSTALL_HEADERS/raw:/usr/include/qt5 QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib QT_INSTALL_LIBS/raw:/usr/lib QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec QT_INSTALL_LIBEXECS/raw:/usr/libexec QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin QT_INSTALL_BINS/raw:/usr/bin QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests QT_INSTALL_TESTS/raw:/usr/tests QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports QT_INSTALL_IMPORTS/raw:/usr/imports QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml QT_INSTALL_QML/raw:/usr/qml QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations QT_INSTALL_TRANSLATIONS/raw:/usr/translations QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_CONFIGURATION/raw:/usr QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib QMAKE_SPEC:linux-g++ QMAKE_XSPEC:devices/linux-buildroot-g++ QMAKE_VERSION:3.1 QT_VERSION:5.15.8 angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake -query QT_SYSROOT: QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations QT_INSTALL_CONFIGURATION: QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib QMAKE_SPEC:linux-g++ QMAKE_XSPEC:linux-g++ QMAKE_VERSION:3.1 QT_VERSION:6.4.0 Any clue? I'm looking into fixing qmake for QT6 anyway Thanks! -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From sebastien.szymanski at armadeus.com Tue Oct 25 07:11:08 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?Q?S=c3=a9bastien_Szymanski?=) Date: Tue, 25 Oct 2022 09:11:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 In-Reply-To: <20221024230532.438bb514@windsurf> References: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> <20221024230532.438bb514@windsurf> Message-ID: Hello Thomas, On 10/24/22 23:05, Thomas Petazzoni wrote: > On Mon, 24 Oct 2022 10:27:19 +0200 > S?bastien Szymanski wrote: > >> Signed-off-by: S?bastien Szymanski >> --- >> package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- >> package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- >> 2 files changed, 4 insertions(+), 4 deletions(-) > > Thanks for the patch, but did you test it? The > 0001-Move-pytest-runner-to-tests_require.patch patch no longer applies: > >>>> python-flask-jsonrpc 2.2.2 Extracting > gzip -d -c /home/thomas/dl/python-flask-jsonrpc/Flask-JSONRPC-2.2.2.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2 -xf - >>>> python-flask-jsonrpc 2.2.2 Patching > > Applying 0001-Move-pytest-runner-to-tests_require.patch using patch: > patching file setup.py > Hunk #1 FAILED at 42. > 1 out of 1 hunk FAILED -- saving rejects to file setup.py.rej > make: *** [package/pkg-generic.mk:251: /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2/.stamp_patched] Error 1 > > Could you have a look? Oops, sorry... Sure! I will send a v2! Regards, > > Thanks! > > Thomas -- S?bastien Szymanski, Armadeus Systems Software engineer From yann.morin at orange.com Tue Oct 25 08:08:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 25 Oct 2022 10:08:06 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> Message-ID: <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> Norbert, All, Thank you for your feedback! :-) On 2022-10-23 23:47 +0200, Norbert Lange spake thusly: > Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > While the /var factory seems to be working in most cases, there have > > been suggestions that it may be slightly and subtely borken in some > > (rare? edge?) cases, especially about symlinks. > > Had to dig up an old post of mine (not the only one touching on that), > some issues are: > > - it kills previous files in /usr/share/factory/var > - it doesn't handle symlinks (just think of /var already containing > a symlink into that factory), > especially relative ones. > - it has sideeffects with tmpfile .confs that are ordered before and > touch /var > - it has sideeffects with other PRE_CMD_HOOKS touching /var > > (Post is from mid 2020, so forgive me if my memory is fuzzy, > but I had already practical problems with atleast the last 2 of those). Forgive me if my memory is fuzzy, but I don't recall seeing any patch to fix those issues with the factory... ;-) > To me this is just not a robust solution Yet, there are some people for whom the factory does work just fine (first-hand experience here, and besides your comments, we have had noone reporting actual issues in the 5+ years we've implemented the factory, AFAICR). So, we do not want to break the situation for them. Once the overlayfs scheme has been in place for some time and it got exercised, we can consider switching the default, and eventualy we can get rid of the factory if it proves to be unfixable (again, without concrete examples that do break it, we can devise a fix). If we can't yet agree on how to integrate the overlayfs based scheme, we need a way to sort out the conflict between the factory and running tmpfiles at build time, which is what patches 1-4 are for, since they do not change the current behaviour, but clarifies the current situation. So, those are the patches where we should concentrate for now. Patches 5-6 introduce the new overlayfs scheme as an alternative to the factory, a new feature, so they can go in later... And yes, I did test the overlayfs scheme in our use-case here, and yes it does work as advertised, so yes, this is a good feature! > > An other solution is to pre-populate /var at build time, by way of > > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > > runtime. > > > > This is slightly accrobatic, though, and requires a few hoops: > > - first, we create a tmpfs > > - there, we create three directories: > > - the first to bind-mount /var as it is, i.e. read-only > > - the second as the read-write upper for the overlayfs > > - the third as the "working area" for the overlays > ..and we depend on overlayfs I just had to enable overlayfs in the kernel, and it worked without any other package. FTR, I have added new runtime tests to validate both the factory and the overlayfs scenarii. I will post them in the coming days when I've cleaned them up (have to run locally, as my gtilab free minutes are exhausted): https://gitlab.com/ymorin/buildroot/-/tree/systemdify-var [--SNIP--] > > Systemd units courtesy Norbert, with slight tweaks and cleanups. > > Yeah, Im not fine with the tweaks to drop the symlink > /usr/lib/systemd/system/var.mount -> ../var.mount > (and the added intstall section) > > First in the same local-fs "target" you could mount /etc, > making this a complicated hidden issue, I don't know > when systemd reloads, I believe only after that target. > > Second, this should be enabled by default, and > in a way even when /etc is borked/not ready. So, currently, Buildroot does not work (does nothing to officialy work) seemlessly with an empty /etc, because we explicitly run "systemctl preset-all" at the end of the build (as a prefs_cmd), and that fills in /etc/systemd/system/. As you said, supporting an empty /etc will require *way* more explicit support in Buildroot > If a user really wants to disable the mount, he can mask it. That is true if using either the symlink or the install section, no? I.e. they'd just provide a preset that reads: disable rootfs-bindount-var.service disable var.mount > > Signed-off-by: Yann E. MORIN > > Cc: Norbert Lange > > Cc: Romain Naour > > Cc: Je?re?my Rosen [--SNIP--] > > --- /dev/null > > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > > @@ -0,0 +1,21 @@ > > +[Unit] > > +Description=Bind-mount variable storage (/var) > > +Documentation=man:file-hierarchy(7) > > +ConditionPathIsSymbolicLink=!/var > > +# ConditionPathIsReadWrite=!/var > > +DefaultDependencies=no > > +Conflicts=umount.target > > +Before=local-fs.target umount.target > > +After=local-fs-pre.target > > A am actually considering changing that to: > > Before=local-fs-pre.target umount.target > # After=local-fs-pre.target No reason to keep comment in units. > It does not depend an anything, It does depend on /run being mounted. > so no technical reason to order > it after anything. And it is technically a preparation for the > actual local-fs.target. This. We do not have a vision of the grand scheme of how systemd organises stuff, what each .target means and how they depend on each others. Maybe my search skills are getting rusted as time passes, but I could never find such a design doc, and it lacks sorely. Manpages are only so good as to explain each details, but they do not provide a global overview... [--SNIP--] > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > > + bool "mount an overlayfs backed by a tmpfs" > > + help > > + Mount an overlayfs on /var, with the upper as a tmpfs. > > + > > + To use a persistent storage, provide your own systemd unit(s) > > + that eventually mount that persistent storage on > > + /run/varoverlay/upper/ > perhaps pull in or depend on overlayfs here I did not need anything beside enabling overlayfs in the kernel (see the runtime tests branch I pointed to above). > Generally the unit and directory names could be more logical, Yes, I agree that we should have a kind of naming scheme for this. But I have no good idea... What I was thinking, though, is that we maybe should make dotted directories, i.e. /run/.varoverlay/{lower,upper,work} > and for allowing the user to specify a custom mount > by reading an EnvironmentFile in the rootfs-bindmount-var unit. It was my understanding that users could provide their own unit(s), something that would ultimately end up with a mount unit like: # cat run_varoverlay_upper.mount [Unit] After=rootfs-bindmount-var.service BindsTo=rootfs-bindmount-var.service [Mount] What=/dev/something Where=/run/varoverlay/upper Type=ext4-or-whatever [Install] BoundBy=var.mount WantedBy=var.mount That way, they do not have to override any of our units; they would just intersperse their unit in the existing dependency graph, between the rootfs-bindmount-var.service and the var.mount. And the content of the filesystem on /dev/something would only get the content of /var, not the {lower,upper,work} directories, which could be a bit confusing. > Planning to add some more comments next week, should find dome time here, > huge commit msgs to get through. Commit messages are important, because they do provide all the rationale and reasoning behind a change. They will be there forever, and in the future, we can refer to them to understand why the code eneded up like it is, and with new insight then, we can understand where our reasoning was flawed, or if it was correct, how the environment around has changed. I consider a good commit log more important than the actual change. Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From jesseevg at gmail.com Tue Oct 25 08:14:01 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Tue, 25 Oct 2022 10:14:01 +0200 Subject: [Buildroot] QT6 Qmake In-Reply-To: References: Message-ID: Op di 25 okt. 2022 om 09:33 schreef Angelo Compagnucci < angelo at amarulasolutions.com>: > > Hello Jesse, > > I was trying to port qt6knx to qt6, the project is not converted to cmake but still based on qmake. > I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is somewhat broken, the following snip shows the differences between qmake for QT5 and QT6: > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake -query > QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_PREFIX/raw:/usr > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_ARCHDATA/raw:/usr > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_DATA/raw:/usr > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc > QT_INSTALL_DOCS/raw:/usr/doc > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 > QT_INSTALL_HEADERS/raw:/usr/include/qt5 > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib > QT_INSTALL_LIBS/raw:/usr/lib > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec > QT_INSTALL_LIBEXECS/raw:/usr/libexec > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin > QT_INSTALL_BINS/raw:/usr/bin > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests > QT_INSTALL_TESTS/raw:/usr/tests > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins > QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins > QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports > QT_INSTALL_IMPORTS/raw:/usr/imports > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml > QT_INSTALL_QML/raw:/usr/qml > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations > QT_INSTALL_TRANSLATIONS/raw:/usr/translations > QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_CONFIGURATION/raw:/usr > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib > QMAKE_SPEC:linux-g++ > QMAKE_XSPEC:devices/linux-buildroot-g++ > QMAKE_VERSION:3.1 > QT_VERSION:5.15.8 > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake -query > QT_SYSROOT: > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations > QT_INSTALL_CONFIGURATION: > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > QMAKE_SPEC:linux-g++ > QMAKE_XSPEC:linux-g++ > QMAKE_VERSION:3.1 > QT_VERSION:6.4.0 > > > Any clue? > > I'm looking into fixing qmake for QT6 anyway > > Thanks! > -- > > Angelo Compagnucci > > Software Engineer > > angelo at amarulasolutions.com > __________________________________ > Amarula Solutions SRL > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 (0)42 243 5310 > info at amarulasolutions.com > > www.amarulasolutions.com > > [`as] https://www.amarulasolutions.com| Hello Angelo, Yes this was one of the parts I couldn't get working initially for which I opted to set it aside for the time being, I dreaded the day this would come as it was a bit of a PITA! As for why it doesn't work, you'll see that the qmake_xspec is linux-g++ in qt6 and devices/linux-buildroot-g++ in your qt5 build, what was done in qt5 was that our own qmake device spec was made to work with the BR compiler/flags, you'll see this in qt5.mk where the qmake command is defined as QT5_QMAKE = $(HOST_DIR)/bin/qmake -spec devices/linux-buildroot-g++ As for how to do it properly, some good reference here is https://wiki.qt.io/Cross-Compile_Qt_6_for_Raspberry_Pi as this shows how cross-compiling is now generally done and how they pass the device spec during building for the target. You can also look under the qt5base folder for qt.conf.in, qmake.conf.in qplatformdefs.h, that together with QT5_INSTALL_QT_CONF in qt5.mk and QT5BASE_CONFIGURE_CMDS in qt5base.mk (more specifically line 335-345) This from what I remember is most if not all that is involved in building the buildroot specific device spec to get qmake working, I hope that at least gives you somewhere to start looking. As for why I couldn't get it working myself at the time, I tried to implement all of the things mentioned above, I had a device spec and the files looked good, I passed it to the qt6 target building with -DQT_QMAKE_TARGET_MKSPEC=devices/linux-buildroot-g++ and everything done in qt5 to get it working was there (or so I thought at least), but in the end there seemed to be some path issues where qmake was looking at the host qt6 instead of the target qt6 and I never really figured it out, the whole host/target building of qt6 was quite the PITA in and of itself, but I'll give it another crack since there's some interest, good to see someone wants to pick it up too! I do think I have some work related to this from previous attempts on one of my dev branches, I'll keep in touch if I find something to send your way, maybe it helps you to have some starting point. Best regards, Jesse -------------- next part -------------- An HTML attachment was scrubbed... URL: From yegorslists at googlemail.com Tue Oct 25 08:33:19 2022 From: yegorslists at googlemail.com (Yegor Yefremov) Date: Tue, 25 Oct 2022 10:33:19 +0200 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: <20221025065539.4646-1-afshin.nasser@gmail.com> References: <20221025065539.4646-1-afshin.nasser@gmail.com> Message-ID: Hi Nasser, On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > Signed-off-by: Nasser Afshin > --- > package/Config.in | 1 + > package/python-pycrate/Config.in | 8 ++++++++ > package/python-pycrate/python-pycrate.hash | 4 ++++ > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ An entry to the DEVELOPERS file is missing. > 4 files changed, 26 insertions(+) > create mode 100644 package/python-pycrate/Config.in > create mode 100644 package/python-pycrate/python-pycrate.hash > create mode 100644 package/python-pycrate/python-pycrate.mk > > diff --git a/package/Config.in b/package/Config.in > index 56b1a08d8b..2443b7bb27 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -951,6 +951,7 @@ menu "External python modules" > source "package/python-pyasn1-modules/Config.in" > source "package/python-pycli/Config.in" > source "package/python-pycparser/Config.in" > + source "package/python-pycrate/Config.in" > source "package/python-pycrypto/Config.in" > source "package/python-pycryptodomex/Config.in" > source "package/python-pydal/Config.in" > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > new file mode 100644 > index 0000000000..9e2123d4dd > --- /dev/null > +++ b/package/python-pycrate/Config.in > @@ -0,0 +1,8 @@ > +config BR2_PACKAGE_PYTHON_PYCRATE > + bool "python-pycrate" > + help > + It provides basically a runtime for encoding and decoding data structures, > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > + network. > + > + https://github.com/P1sec/pycrate/ > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > new file mode 100644 > index 0000000000..24aa51d8e4 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.hash > @@ -0,0 +1,4 @@ > +# md5 from https://pypi.python.org/pypi/pycrate/json > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > +# Locally computed > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > new file mode 100644 > index 0000000000..41ce6c18f2 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# python-pycrate > +# > +################################################################################ > + > +PYTHON_PYCRATE_VERSION = 0.5.5 > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > +PYTHON_PYCRATE_SETUP_TYPE = distutils SETUP_TYPE is setuptools. Have you tried this command? ./utils/scanpypi pycrate It will do almost everything you need. The thing that is missing is licensing info because there is no license file in the source archive. Best regards, Yegor > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > + > +$(eval $(python-package)) > -- > 2.17.1 > From angelo at amarulasolutions.com Tue Oct 25 08:36:22 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 25 Oct 2022 10:36:22 +0200 Subject: [Buildroot] QT6 Qmake In-Reply-To: References: Message-ID: On Tue, Oct 25, 2022 at 10:14 AM Jesse Van Gavere wrote: > Op di 25 okt. 2022 om 09:33 schreef Angelo Compagnucci < > angelo at amarulasolutions.com>: > > > > Hello Jesse, > > > > I was trying to port qt6knx to qt6, the project is not converted to > cmake but still based on qmake. > > I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is > somewhat broken, the following snip shows the differences between qmake for > QT5 and QT6: > > > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake > -query > > > QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot > > > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_PREFIX/raw:/usr > > > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_ARCHDATA/raw:/usr > > > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_DATA/raw:/usr > > > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc > > QT_INSTALL_DOCS/raw:/usr/doc > > > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 > > QT_INSTALL_HEADERS/raw:/usr/include/qt5 > > > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib > > QT_INSTALL_LIBS/raw:/usr/lib > > > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec > > QT_INSTALL_LIBEXECS/raw:/usr/libexec > > > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin > > QT_INSTALL_BINS/raw:/usr/bin > > > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests > > QT_INSTALL_TESTS/raw:/usr/tests > > > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins > > QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins > > > QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports > > QT_INSTALL_IMPORTS/raw:/usr/imports > > > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml > > QT_INSTALL_QML/raw:/usr/qml > > > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations > > QT_INSTALL_TRANSLATIONS/raw:/usr/translations > > > QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_CONFIGURATION/raw:/usr > > > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > > QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples > > > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > > QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples > > > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > > > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > > > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin > > > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib > > QMAKE_SPEC:linux-g++ > > QMAKE_XSPEC:devices/linux-buildroot-g++ > > QMAKE_VERSION:3.1 > > QT_VERSION:5.15.8 > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake > -query > > QT_SYSROOT: > > > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc > > > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include > > > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > > > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > > > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > > > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests > > > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins > > > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml > > > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations > > QT_INSTALL_CONFIGURATION: > > > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > > > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > > > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > > > QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > > > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > > QMAKE_SPEC:linux-g++ > > QMAKE_XSPEC:linux-g++ > > QMAKE_VERSION:3.1 > > QT_VERSION:6.4.0 > > > > > > Any clue? > > > > I'm looking into fixing qmake for QT6 anyway > > > > Thanks! > > -- > > > > Angelo Compagnucci > > > > Software Engineer > > > > angelo at amarulasolutions.com > > __________________________________ > > Amarula Solutions SRL > > > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > > > T. +39 (0)42 243 5310 > > info at amarulasolutions.com > > > > www.amarulasolutions.com > > > > [`as] https://www.amarulasolutions.com| > Hello Angelo, > > Yes this was one of the parts I couldn't get working initially for which I > opted to set it aside for the time being, I dreaded the day this would come > as it was a bit of a PITA! > As for why it doesn't work, you'll see that the qmake_xspec is linux-g++ > in qt6 and devices/linux-buildroot-g++ in your qt5 build, what was done in > qt5 was that our own qmake device spec was made to work with the BR > compiler/flags, you'll see this in qt5.mk where the qmake command is > defined as > > QT5_QMAKE = $(HOST_DIR)/bin/qmake -spec devices/linux-buildroot-g++ > > As for how to do it properly, some good reference here is > https://wiki.qt.io/Cross-Compile_Qt_6_for_Raspberry_Pi as this shows how > cross-compiling is now generally done and how they pass the device spec > during building for the target. > You can also look under the qt5base folder for qt.conf.in, qmake.conf.in > qplatformdefs.h, that together with QT5_INSTALL_QT_CONF in qt5.mk and > QT5BASE_CONFIGURE_CMDS in qt5base.mk (more specifically line 335-345) > This from what I remember is most if not all that is involved in building > the buildroot specific device spec to get qmake working, I hope that at > least gives you somewhere to start looking. > > As for why I couldn't get it working myself at the time, I tried to > implement all of the things mentioned above, I had a device spec and the > files looked good, I passed it to the qt6 target building with > -DQT_QMAKE_TARGET_MKSPEC=devices/linux-buildroot-g++ and everything done in > qt5 to get it working was there (or so I thought at least), but in the end > there seemed to be some path issues where qmake was looking at the host qt6 > instead of the target qt6 and I never really figured it out, the whole > host/target building of qt6 was quite the PITA in and of itself, but I'll > give it another crack since there's some interest, good to see someone > wants to pick it up too! > > I do think I have some work related to this from previous attempts on one > of my dev branches, I'll keep in touch if I find something to send your > way, maybe it helps you to have some starting point. > So we share the very same frustration I guess! I did exactly all the things you mentioned, and I couldn't make it working. Let's try harder, then! Thanks for your quick reply! > > Best regards, > Jesse > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at korsgaard.com Tue Oct 25 09:38:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 11:38:50 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <871qqy4foa.fsf@dell.be.48ers.dk> (Peter Korsgaard's message of "Sun, 23 Oct 2022 19:23:49 +0200") References: <20221022112243.31889-1-neal.frager@amd.com> <871qqy4foa.fsf@dell.be.48ers.dk> Message-ID: <87eduw1bv9.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Neal" == Neal Frager writes: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. >> https://github.com/Xilinx/bootgen >> Signed-off-by: Neal Frager >> --- V1-> V2: >> - improved build statement to support older hosts >> - added bootgen.hash > Committed, thanks. As expected, this fails to build on setups with modern flex / configs where host-flex is built, so I've sent a patch with the fix from the PR: https://github.com/Xilinx/bootgen/pull/20 -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 25 09:37:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 11:37:51 +0200 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex Message-ID: <20221025093752.3520434-1-peter@korsgaard.com> Fixes: http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) Fix it by using normal local #include statements by: sed -i 's//"FlexLexer.h"/g' * Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 Signed-off-by: Peter Korsgaard --- ...x-build-on-machines-with-modern-flex.patch | 133 ++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch diff --git a/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch new file mode 100644 index 0000000000..ea82f5e70c --- /dev/null +++ b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch @@ -0,0 +1,133 @@ +From 7251dce3dc974c7372e7024ade3e8a455266cfd2 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Fri, 18 Mar 2022 09:02:31 +0100 +Subject: [PATCH] Fix build on machines with modern flex + +Bootgen embeds an old version of flex, but uses the system include syntax +(#include <>) to reference it, causing conflicts on systems with the +development headers for a modern flex version installed, leading to build +issues like: + +../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': +../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) + +Fix it by using normal local #include statements by: + +sed -i 's//"FlexLexer.h"/g' * + +Signed-off-by: Peter Korsgaard +[Submitted upstream: https://github.com/Xilinx/bootgen/pull/20] +--- + FlexLexer.h | 6 +++--- + bif.yy.cpp | 2 +- + bifscanner.h | 2 +- + cmdoptions.yy.cpp | 2 +- + cmdoptionsscanner.h | 2 +- + reginit.yy.cpp | 2 +- + reginitscanner.h | 2 +- + 7 files changed, 9 insertions(+), 9 deletions(-) + +diff --git a/FlexLexer.h b/FlexLexer.h +index b115b5d..1c0386f 100755 +--- a/FlexLexer.h ++++ b/FlexLexer.h +@@ -33,15 +33,15 @@ + // + // If you want to create multiple lexer classes, you use the -P flag + // to rename each yyFlexLexer to some other xxFlexLexer. You then +-// include in your other sources once per lexer class: ++// include "FlexLexer.h" in your other sources once per lexer class: + // + // #undef yyFlexLexer + // #define yyFlexLexer xxFlexLexer +-// #include ++// #include "FlexLexer.h" + // + // #undef yyFlexLexer + // #define yyFlexLexer zzFlexLexer +-// #include ++// #include "FlexLexer.h" + // ... + + #ifndef __FLEX_LEXER_H +diff --git a/bif.yy.cpp b/bif.yy.cpp +index 7dd0841..9e09267 100644 +--- a/bif.yy.cpp ++++ b/bif.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/bifscanner.h b/bifscanner.h +index a6ec9e4..ded78da 100755 +--- a/bifscanner.h ++++ b/bifscanner.h +@@ -28,7 +28,7 @@ + #if ! defined(yyFlexLexerOnce) + #undef yyFlexLexer + #define yyFlexLexer bifFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/cmdoptions.yy.cpp b/cmdoptions.yy.cpp +index 6ee80de..1acfcce 100644 +--- a/cmdoptions.yy.cpp ++++ b/cmdoptions.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/cmdoptionsscanner.h b/cmdoptionsscanner.h +index a48af09..e02c1f1 100755 +--- a/cmdoptionsscanner.h ++++ b/cmdoptionsscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/reginit.yy.cpp b/reginit.yy.cpp +index 8422867..ff088f9 100644 +--- a/reginit.yy.cpp ++++ b/reginit.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/reginitscanner.h b/reginitscanner.h +index 4e78af9..23177be 100755 +--- a/reginitscanner.h ++++ b/reginitscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +-- +2.30.2 + -- 2.30.2 From neal.frager at amd.com Tue Oct 25 09:50:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 09:50:16 +0000 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex In-Reply-To: <20221025093752.3520434-1-peter@korsgaard.com> References: <20221025093752.3520434-1-peter@korsgaard.com> Message-ID: > Fixes: > http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ > Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: > ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': > ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) > Fix it by using normal local #include statements by: > sed -i 's//"FlexLexer.h"/g' * > Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 > Signed-off-by: Peter Korsgaard Reviewed-by: Neal Frager Thank you Peter! Best regards, Neal Frager AMD From neal.frager at amd.com Tue Oct 25 09:51:19 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 09:51:19 +0000 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <87eduw1bv9.fsf@dell.be.48ers.dk> References: <20221022112243.31889-1-neal.frager@amd.com> <871qqy4foa.fsf@dell.be.48ers.dk> <87eduw1bv9.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Neal" == Neal Frager writes: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. >> https://github.com/Xilinx/bootgen >> Signed-off-by: Neal Frager >> --- V1-> V2: >> - improved build statement to support older hosts >> - added bootgen.hash > Committed, thanks. > As expected, this fails to build on setups with modern flex / configs where host-flex is built, so I've sent a patch with the fix from the PR: > https://github.com/Xilinx/bootgen/pull/20 > -- > Bye, Peter Korsgaard Thank you Peter. I will confirm once this is committed in the bootgen master branch. Best regards, Neal Frager AMD From simon.richter at ptwdosimetry.com Tue Oct 25 10:02:00 2022 From: simon.richter at ptwdosimetry.com (Simon Richter) Date: Tue, 25 Oct 2022 12:02:00 +0200 Subject: [Buildroot] [PATCH v2] support/download/cargo-post-process: cargo output for vendor config In-Reply-To: <20221021163133.GO2503@scaer> References: <20221021163133.GO2503@scaer> Message-ID: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> Use the output of `cargo vendor` to generate the vendor configuration. Fixes the need to patch the generated configuration if there are non-crates.io dependencies. Note: `cargo vendor` currently prints a newline before it prints the needed configuration. This is fixed in +nightly, will end up in +stable soon and must be considered when updating cargo. See: https://github.com/rust-lang/cargo/pull/11273 Until then it is needed to remove this first line to make sure that the contents of .cargo/config will be the same as they were generated with the earlier version of the script. Thus, the hashes of the packages that use this script remain the same. Signed-off-by: Simon Richter --- support/download/cargo-post-process | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process index a4a4718a2a..186e9eb69b 100755 --- a/support/download/cargo-post-process +++ b/support/download/cargo-post-process @@ -1,6 +1,7 @@ #!/usr/bin/env bash set -e +set -o pipefail . "${0%/*}/helpers" @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" # Do the Cargo vendoring pushd "${base_name}" > /dev/null -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR # Create the local .cargo/config with vendor info +# +# The first line of the output to stdout is empty. +# So skip it to have the file start with the vendoring +# configuration (`tail --lines=+2`). +# +# NOTE: +# There is a patch for cargo to remove the first empty line: +# See: https://github.com/rust-lang/cargo/pull/11273 +# +# The patch already landed in +nightly and will end up +# in +stable soon. +# +# -> When updating rust/cargo, the call to `tail` must be removed. +# mkdir -p .cargo/ -cat <.cargo/config -[source.crates-io] -replace-with = "vendored-sources" +cargo vendor \ + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ + --locked VENDOR \ + | tail --lines=+2 | tee .cargo/config -[source.vendored-sources] -directory = "VENDOR" -EOF popd > /dev/null post_process_repack "$(pwd)" "${base_name}" "${output}" -- 2.38.1 From nolange79 at gmail.com Tue Oct 25 12:12:09 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Tue, 25 Oct 2022 14:12:09 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> Message-ID: Am Di., 25. Okt. 2022 um 10:08 Uhr schrieb : > > Norbert, All, > > Thank you for your feedback! :-) > > On 2022-10-23 23:47 +0200, Norbert Lange spake thusly: > > Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > > While the /var factory seems to be working in most cases, there have > > > been suggestions that it may be slightly and subtely borken in some > > > (rare? edge?) cases, especially about symlinks. > > > > Had to dig up an old post of mine (not the only one touching on that), > > some issues are: > > > > - it kills previous files in /usr/share/factory/var > > - it doesn't handle symlinks (just think of /var already containing > > a symlink into that factory), > > especially relative ones. > > - it has sideeffects with tmpfile .confs that are ordered before and > > touch /var > > - it has sideeffects with other PRE_CMD_HOOKS touching /var > > > > (Post is from mid 2020, so forgive me if my memory is fuzzy, > > but I had already practical problems with atleast the last 2 of those). > > Forgive me if my memory is fuzzy, but I don't recall seeing any patch to > fix those issues with the factory... ;-) I am not sure a complete fix for the factory would be a computable problem, know the implementation then you can "break it". there are way simpler solutions for "make a copy of that stuff". > > > To me this is just not a robust solution > > Yet, there are some people for whom the factory does work just fine > (first-hand experience here, and besides your comments, we have had > noone reporting actual issues in the 5+ years we've implemented the > factory, AFAICR). So, we do not want to break the situation for them. > > Once the overlayfs scheme has been in place for some time and it got > exercised, we can consider switching the default, and eventualy we can > get rid of the factory if it proves to be unfixable (again, without > concrete examples that do break it, we can devise a fix). Thats a sunken cost fallacy ;) > > If we can't yet agree on how to integrate the overlayfs based scheme, we > need a way to sort out the conflict between the factory and running > tmpfiles at build time, which is what patches 1-4 are for, since they do > not change the current behaviour, but clarifies the current situation. > > So, those are the patches where we should concentrate for now. > > Patches 5-6 introduce the new overlayfs scheme as an alternative to the > factory, a new feature, so they can go in later... > > And yes, I did test the overlayfs scheme in our use-case here, and yes > it does work as advertised, so yes, this is a good feature! Glad to hear, I am going to clean it up a bit > > > > An other solution is to pre-populate /var at build time, by way of > > > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > > > runtime. > > > > > > This is slightly accrobatic, though, and requires a few hoops: > > > - first, we create a tmpfs > > > - there, we create three directories: > > > - the first to bind-mount /var as it is, i.e. read-only > > > - the second as the read-write upper for the overlayfs > > > - the third as the "working area" for the overlays > > ..and we depend on overlayfs > > I just had to enable overlayfs in the kernel, and it worked without any > other package. I meant its no option if the kernel does not provide the overlayfs, which would be an argument against it. > > FTR, I have added new runtime tests to validate both the factory and > the overlayfs scenarii. I will post them in the coming days when I've > cleaned them up (have to run locally, as my gtilab free minutes are > exhausted): > > https://gitlab.com/ymorin/buildroot/-/tree/systemdify-var > > [--SNIP--] > > > Systemd units courtesy Norbert, with slight tweaks and cleanups. > > > > Yeah, Im not fine with the tweaks to drop the symlink > > /usr/lib/systemd/system/var.mount -> ../var.mount > > (and the added intstall section) > > > > First in the same local-fs "target" you could mount /etc, > > making this a complicated hidden issue, I don't know > > when systemd reloads, I believe only after that target. > > > > Second, this should be enabled by default, and > > in a way even when /etc is borked/not ready. > > So, currently, Buildroot does not work (does nothing to officialy work) > seemlessly with an empty /etc, because we explicitly run "systemctl > preset-all" at the end of the build (as a prefs_cmd), and that fills in > /etc/systemd/system/. > > As you said, supporting an empty /etc will require *way* more explicit > support in Buildroot It helps if there arent any additional blocks in the way, systemd envisions your rootfs "master" to live under /usr. Key services should be statically linked (like for ex. the dbus.socket). > > If a user really wants to disable the mount, he can mask it. > > That is true if using either the symlink or the install section, no? > I.e. they'd just provide a preset that reads: > > disable rootfs-bindount-var.service > disable var.mount Yeah, it should be a "hard" default. And not affected by the usuall en/disable/preset operations. the mask/unmask operations are the "hard" stuff. Lets turn it around: what arguments can you muster for using the install functionality? > > > > Signed-off-by: Yann E. MORIN > > > Cc: Norbert Lange > > > Cc: Romain Naour > > > Cc: Je?re?my Rosen > [--SNIP--] > > > --- /dev/null > > > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > > > @@ -0,0 +1,21 @@ > > > +[Unit] > > > +Description=Bind-mount variable storage (/var) > > > +Documentation=man:file-hierarchy(7) > > > +ConditionPathIsSymbolicLink=!/var > > > +# ConditionPathIsReadWrite=!/var > > > +DefaultDependencies=no > > > +Conflicts=umount.target > > > +Before=local-fs.target umount.target > > > +After=local-fs-pre.target > > > > A am actually considering changing that to: > > > > Before=local-fs-pre.target umount.target > > # After=local-fs-pre.target > > No reason to keep comment in units. For displaying the change, expect a series from me later. > > > It does not depend an anything, > > It does depend on /run being mounted. Which is a *given invariant* with systemd, one of the first things that happen. > > > so no technical reason to order > > it after anything. And it is technically a preparation for the > > actual local-fs.target. > > This. > > We do not have a vision of the grand scheme of how systemd organises > stuff, what each .target means and how they depend on each others. Maybe > my search skills are getting rusted as time passes, but I could never > find such a design doc, and it lacks sorely. Manpages are only so good > as to explain each details, but they do not provide a global overview... Like that? : https://www.freedesktop.org/software/systemd/man/bootup.html > > [--SNIP--] > > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > > > + bool "mount an overlayfs backed by a tmpfs" > > > + help > > > + Mount an overlayfs on /var, with the upper as a tmpfs. > > > + > > > + To use a persistent storage, provide your own systemd unit(s) > > > + that eventually mount that persistent storage on > > > + /run/varoverlay/upper/ > > perhaps pull in or depend on overlayfs here > > I did not need anything beside enabling overlayfs in the kernel (see the > runtime tests branch I pointed to above). > > > Generally the unit and directory names could be more logical, > > Yes, I agree that we should have a kind of naming scheme for this. But I > have no good idea... > > What I was thinking, though, is that we maybe should make dotted > directories, i.e. /run/.varoverlay/{lower,upper,work} id namespace it like /run/.buildroot/overlay_var_{lower,upper,work}. > > > and for allowing the user to specify a custom mount > > by reading an EnvironmentFile in the rootfs-bindmount-var unit. > > It was my understanding that users could provide their own unit(s), > something that would ultimately end up with a mount unit like: > > # cat run_varoverlay_upper.mount > [Unit] > After=rootfs-bindmount-var.service > BindsTo=rootfs-bindmount-var.service > > [Mount] > What=/dev/something > Where=/run/varoverlay/upper > Type=ext4-or-whatever > > [Install] > BoundBy=var.mount > WantedBy=var.mount > > That way, they do not have to override any of our units; they would just > intersperse their unit in the existing dependency graph, between the > rootfs-bindmount-var.service and the var.mount. > > And the content of the filesystem on /dev/something would only get the > content of /var, not the {lower,upper,work} directories, which could be > a bit confusing. Yeah, I havent thought about a customizing. Not sure if it wouldnt be better to provide a simple one and a customizable one. ie. the simple one doesnt have to wait for udev, loaded kernel modules for blockdevices or network connections to do its job. > > > Planning to add some more comments next week, should find dome time here, > > huge commit msgs to get through. > > Commit messages are important, because they do provide all the rationale > and reasoning behind a change. They will be there forever, and in the > future, we can refer to them to understand why the code eneded up like > it is, and with new insight then, we can understand where our reasoning > was flawed, or if it was correct, how the environment around has > changed. > > I consider a good commit log more important than the actual change. Wasnt meant as complaint. Regards, Norbert From peter at korsgaard.com Tue Oct 25 13:33:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 15:33:04 +0200 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex In-Reply-To: <20221025093752.3520434-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 25 Oct 2022 11:37:51 +0200") References: <20221025093752.3520434-1-peter@korsgaard.com> Message-ID: <87a65k110v.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Fixes: > http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ > Bootgen embeds an old version of flex, but uses the system include syntax > (#include <>) to reference it, causing conflicts on systems with the > development headers for a modern flex version installed, leading to build > issues like: > ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': > ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' > (operand types are 'std::istream' {aka 'std::basic_istream'} and > 'std::istream*' {aka 'std::basic_istream*'}) > Fix it by using normal local #include statements by: > sed -i 's//"FlexLexer.h"/g' * > Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 25 13:32:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 15:32:57 +0200 Subject: [Buildroot] [git commit] package/booten: Fix build on machines with modern flex / host-flex Message-ID: <20221025133322.AAF1A87047@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6381ae865fb2ed8d7f840925610ded76774e25e7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) Fix it by using normal local #include statements by: sed -i 's//"FlexLexer.h"/g' * Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 Signed-off-by: Peter Korsgaard Reviewed-by: Neal Frager Signed-off-by: Peter Korsgaard --- ...01-Fix-build-on-machines-with-modern-flex.patch | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) diff --git a/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch new file mode 100644 index 0000000000..ea82f5e70c --- /dev/null +++ b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch @@ -0,0 +1,133 @@ +From 7251dce3dc974c7372e7024ade3e8a455266cfd2 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Fri, 18 Mar 2022 09:02:31 +0100 +Subject: [PATCH] Fix build on machines with modern flex + +Bootgen embeds an old version of flex, but uses the system include syntax +(#include <>) to reference it, causing conflicts on systems with the +development headers for a modern flex version installed, leading to build +issues like: + +../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': +../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) + +Fix it by using normal local #include statements by: + +sed -i 's//"FlexLexer.h"/g' * + +Signed-off-by: Peter Korsgaard +[Submitted upstream: https://github.com/Xilinx/bootgen/pull/20] +--- + FlexLexer.h | 6 +++--- + bif.yy.cpp | 2 +- + bifscanner.h | 2 +- + cmdoptions.yy.cpp | 2 +- + cmdoptionsscanner.h | 2 +- + reginit.yy.cpp | 2 +- + reginitscanner.h | 2 +- + 7 files changed, 9 insertions(+), 9 deletions(-) + +diff --git a/FlexLexer.h b/FlexLexer.h +index b115b5d..1c0386f 100755 +--- a/FlexLexer.h ++++ b/FlexLexer.h +@@ -33,15 +33,15 @@ + // + // If you want to create multiple lexer classes, you use the -P flag + // to rename each yyFlexLexer to some other xxFlexLexer. You then +-// include in your other sources once per lexer class: ++// include "FlexLexer.h" in your other sources once per lexer class: + // + // #undef yyFlexLexer + // #define yyFlexLexer xxFlexLexer +-// #include ++// #include "FlexLexer.h" + // + // #undef yyFlexLexer + // #define yyFlexLexer zzFlexLexer +-// #include ++// #include "FlexLexer.h" + // ... + + #ifndef __FLEX_LEXER_H +diff --git a/bif.yy.cpp b/bif.yy.cpp +index 7dd0841..9e09267 100644 +--- a/bif.yy.cpp ++++ b/bif.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/bifscanner.h b/bifscanner.h +index a6ec9e4..ded78da 100755 +--- a/bifscanner.h ++++ b/bifscanner.h +@@ -28,7 +28,7 @@ + #if ! defined(yyFlexLexerOnce) + #undef yyFlexLexer + #define yyFlexLexer bifFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/cmdoptions.yy.cpp b/cmdoptions.yy.cpp +index 6ee80de..1acfcce 100644 +--- a/cmdoptions.yy.cpp ++++ b/cmdoptions.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/cmdoptionsscanner.h b/cmdoptionsscanner.h +index a48af09..e02c1f1 100755 +--- a/cmdoptionsscanner.h ++++ b/cmdoptionsscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/reginit.yy.cpp b/reginit.yy.cpp +index 8422867..ff088f9 100644 +--- a/reginit.yy.cpp ++++ b/reginit.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/reginitscanner.h b/reginitscanner.h +index 4e78af9..23177be 100755 +--- a/reginitscanner.h ++++ b/reginitscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +-- +2.30.2 + From james.hilliard1 at gmail.com Tue Oct 25 13:58:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 07:58:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.11.0 Message-ID: <20221025135813.2387865-1-james.hilliard1@gmail.com> Add new host-pkgconf host python3 dependency. Set new --with-build-python conf options for target python build. Drop Fix cross compiling the uuid module patch which is no longer required as pkgconfig is now used for include directory detection. Refresh patches. License hash changed due to year update: https://github.com/python/cpython/commit/ba00f0d93a4aea85ae8089f139856a7c450584d7 Signed-off-by: James Hilliard --- ...e-the-build-of-pyc-files-conditional.patch | 14 +++--- ...taddrinfo-configure-test-when-cross-.patch | 20 ++++---- ...re-to-disable-the-build-of-certain-e.patch | 32 ++++++------ ...y-header-paths-for-cross-compilation.patch | 12 ++--- ...ook-in-usr-lib-termcap-for-libraries.patch | 10 ++-- .../0006-Don-t-add-multiarch-paths.patch | 8 +-- .../0007-Abort-on-failed-module-build.patch | 8 +-- .../0008-Serial-ioctl-workaround.patch | 6 +-- ...e-shebang-of-Python-scripts-for-cros.patch | 6 +-- ...ig.sh.in-ensure-sed-invocations-only.patch | 4 +- .../0011-Add-an-option-to-disable-pydoc.patch | 32 ++++++------ ...012-Add-an-option-to-disable-lib2to3.patch | 43 ++++++++-------- ...option-to-disable-the-sqlite3-module.patch | 37 ++++++-------- ...d-an-option-to-disable-the-tk-module.patch | 24 ++++----- ...-option-to-disable-the-curses-module.patch | 18 +++---- .../0016-Add-an-option-to-disable-expat.patch | 49 +++++++------------ ...-Add-an-option-to-disable-CJK-codecs.patch | 8 +-- .../0018-Add-an-option-to-disable-NIS.patch | 8 +-- ...Add-an-option-to-disable-unicodedata.patch | 8 +-- .../0020-Add-an-option-to-disable-IDLE.patch | 26 +++++----- ...021-Add-an-option-to-disable-decimal.patch | 36 +++++--------- ...on-to-disable-the-ossaudiodev-module.patch | 14 +++--- ...an-option-to-disable-openssl-support.patch | 8 +-- ...ption-to-disable-the-readline-module.patch | 8 +-- ...to-disable-zlib-bzip2-and-xz-modules.patch | 8 +-- ...thon-config.sh-don-t-reassign-prefix.patch | 6 +-- ...dd-an-option-to-disable-uuid-module.patch} | 8 +-- ...-Fix-cross-compiling-the-uuid-module.patch | 43 ---------------- ...-fix-building-on-older-distributions.patch | 47 ++++++++++++++++++ ...p-CC-print-multiarch-output-for-mus.patch} | 8 +-- ...-fix-building-on-older-distributions.patch | 38 -------------- ...on-to-disable-the-berkeleydb-module.patch} | 8 +-- ...ng-doesn-t-set-errno-when-encryptio.patch} | 8 +-- package/python3/python3.hash | 4 +- package/python3/python3.mk | 12 +++-- 35 files changed, 285 insertions(+), 344 deletions(-) rename package/python3/{0028-Add-an-option-to-disable-uuid-module.patch => 0027-Add-an-option-to-disable-uuid-module.patch} (81%) delete mode 100644 package/python3/0027-Fix-cross-compiling-the-uuid-module.patch create mode 100644 package/python3/0028-fix-building-on-older-distributions.patch rename package/python3/{0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch => 0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch} (91%) delete mode 100644 package/python3/0029-fix-building-on-older-distributions.patch rename package/python3/{0031-Add-an-option-to-disable-the-berkeleydb-module.patch => 0030-Add-an-option-to-disable-the-berkeleydb-module.patch} (80%) rename package/python3/{0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch => 0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch} (89%) diff --git a/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch b/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch index d3b5368903..92aa7274ba 100644 --- a/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch +++ b/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch @@ -1,4 +1,4 @@ -From 322724e166d7ec0393aec577c12fdf6ef2b61e1d Mon Sep 17 00:00:00 2001 +From 51ed7f93cc0333efa8fccd9b88db713c48993df9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 16:21:31 -0800 Subject: [PATCH] Make the build of pyc files conditional @@ -15,10 +15,10 @@ Signed-off-by: Andrey Smirnov 2 files changed, 8 insertions(+) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 77f91e72b1..0c809f3d8a 100644 +index 8fbcd7ac17..2957c8e5a1 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1600,6 +1600,7 @@ libinstall: build_all $(srcdir)/Modules/xxmodule.c +@@ -2078,6 +2078,7 @@ libinstall: all $(srcdir)/Modules/xxmodule.c $(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \ $(DESTDIR)$(LIBDEST)/distutils/tests ; \ fi @@ -26,7 +26,7 @@ index 77f91e72b1..0c809f3d8a 100644 -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ -j0 -d $(LIBDEST) -f \ -@@ -1627,6 +1628,7 @@ libinstall: build_all $(srcdir)/Modules/xxmodule.c +@@ -2105,6 +2106,7 @@ libinstall: all $(srcdir)/Modules/xxmodule.c $(PYTHON_FOR_BUILD) -Wi -OO $(DESTDIR)$(LIBDEST)/compileall.py \ -j0 -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages @@ -35,10 +35,10 @@ index 77f91e72b1..0c809f3d8a 100644 $(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/Grammar.txt -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ diff --git a/configure.ac b/configure.ac -index d60f05251a..1ee5a09588 100644 +index ab5e1de6fa..0cf89ed641 100644 --- a/configure.ac +++ b/configure.ac -@@ -1110,6 +1110,12 @@ fi +@@ -1441,6 +1441,12 @@ fi AC_MSG_CHECKING(LDLIBRARY) @@ -52,5 +52,5 @@ index d60f05251a..1ee5a09588 100644 # library that we build, but we do not want to link against it (we # will find it with a -framework option). For this reason there is an -- -2.25.1 +2.34.1 diff --git a/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch b/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch index 411b8dae4e..5389cb5d15 100644 --- a/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch +++ b/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch @@ -1,4 +1,4 @@ -From 72e20220f3a592b3ab9f440fbe74efa9f9e82d49 Mon Sep 17 00:00:00 2001 +From b180ab302e2a82be239af334382436628b81381e Mon Sep 17 00:00:00 2001 From: Vanya Sergeev Date: Wed, 23 Dec 2015 11:30:33 +0100 Subject: [PATCH] Disable buggy_getaddrinfo configure test when cross-compiling @@ -10,18 +10,18 @@ Signed-off-by: Vanya Sergeev 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac -index 1ee5a09588..c2445edc88 100644 +index 0cf89ed641..830885fcb3 100644 --- a/configure.ac +++ b/configure.ac -@@ -4230,7 +4230,7 @@ fi +@@ -5086,7 +5086,7 @@ fi])) + dnl if ac_cv_func_getaddrinfo + ]) - AC_MSG_RESULT($ac_cv_buggy_getaddrinfo) - --if test $have_getaddrinfo = no || test "$ac_cv_buggy_getaddrinfo" = yes -+if test $have_getaddrinfo = no || test "$cross_compiling" != "yes" -a "$ac_cv_buggy_getaddrinfo" = yes +-if test "$ac_cv_func_getaddrinfo" = no -o "$ac_cv_buggy_getaddrinfo" = yes ++if test "$ac_cv_func_getaddrinfo" = no || test "$cross_compiling" != "yes" -a "$ac_cv_buggy_getaddrinfo" = yes then - if test $ipv6 = yes - then + AS_VAR_IF([ipv6], [yes], [ + AC_MSG_ERROR([m4_normalize([ -- -2.25.1 +2.34.1 diff --git a/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch b/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch index 7ac0f39d06..5b3911374e 100644 --- a/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch +++ b/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch @@ -1,4 +1,4 @@ -From df7c95b4ceecf390b961d843a556c470ac9080b2 Mon Sep 17 00:00:00 2001 +From 8e02cebdac536dfb6748da2c50656a26f70d9da7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 16:33:22 -0800 Subject: [PATCH] Add infrastructure to disable the build of certain extensions @@ -44,10 +44,10 @@ Signed-off-by: Andrey Smirnov 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 0c809f3d8a..7c3dde8dd4 100644 +index 2957c8e5a1..c1cfb96767 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -218,6 +218,8 @@ FILEMODE= 644 +@@ -239,6 +239,8 @@ FILEMODE= 644 # configure script arguments CONFIG_ARGS= @CONFIG_ARGS@ @@ -56,18 +56,18 @@ index 0c809f3d8a..7c3dde8dd4 100644 # Subdirectories with code SRCDIRS= @SRCDIRS@ -@@ -628,6 +630,7 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o +@@ -739,6 +741,7 @@ sharedmods: $(PYTHON_FOR_BUILD_DEPS) pybuilddir.txt @LIBMPDEC_INTERNAL@ @LIBEXPA + *) quiet="";; \ esac; \ echo "$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ - _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ + DISABLED_EXTENSIONS="$(DISABLED_EXTENSIONS)" \ $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build"; \ $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ - _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ -@@ -1748,7 +1751,8 @@ libainstall: @DEF_MAKE_RULE@ python-config + $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build +@@ -2228,7 +2231,8 @@ libainstall: all python-config # Install the dynamically loadable modules # This goes into $(exec_prefix) - sharedinstall: sharedmods + sharedinstall: all - $(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \ + $(RUNSHARED) DISABLED_EXTENSIONS="$(DISABLED_EXTENSIONS)" \ + $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \ @@ -75,12 +75,12 @@ index 0c809f3d8a..7c3dde8dd4 100644 --install-scripts=$(BINDIR) \ --install-platlib=$(DESTSHARED) \ diff --git a/configure.ac b/configure.ac -index c2445edc88..73d66167de 100644 +index 830885fcb3..5a6a1fe608 100644 --- a/configure.ac +++ b/configure.ac -@@ -3091,6 +3091,8 @@ LIBS="$withval $LIBS" - - PKG_PROG_PKG_CONFIG +@@ -3562,6 +3562,8 @@ LIBS="$withval $LIBS" + ], + [AC_MSG_RESULT(no)]) +AC_SUBST(DISABLED_EXTENSIONS) + @@ -88,11 +88,11 @@ index c2445edc88..73d66167de 100644 AC_MSG_CHECKING(for --with-system-expat) AC_ARG_WITH(system_expat, diff --git a/setup.py b/setup.py -index 770866bca7..b6c829b3a5 100644 +index 15d0d4576a..e496ee34c2 100644 --- a/setup.py +++ b/setup.py -@@ -58,7 +58,10 @@ with warnings.catch_warnings(): - TEST_EXTENSIONS = (sysconfig.get_config_var('TEST_MODULES') == 'yes') +@@ -56,7 +56,10 @@ + # This global variable is used to hold the list of modules to be disabled. -DISABLED_MODULE_LIST = [] @@ -104,5 +104,5 @@ index 770866bca7..b6c829b3a5 100644 # --list-module-names option used by Tools/scripts/generate_module_names.py LIST_MODULE_NAMES = False -- -2.25.1 +2.34.1 diff --git a/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch b/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch index 0311348405..9a55d2582d 100644 --- a/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch +++ b/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch @@ -1,4 +1,4 @@ -From 61af65485f1dade4aa08d0cf2b24082aeda24c51 Mon Sep 17 00:00:00 2001 +From 132b9dca3bb4d4682f7e318648ce11e1abb31b62 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:33:14 +0100 Subject: [PATCH] Adjust library/header paths for cross-compilation @@ -23,10 +23,10 @@ Refresh for 3.10.0 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/Lib/distutils/command/build_ext.py b/Lib/distutils/command/build_ext.py -index 1a9bd12..3cf7d67 100644 +index f287b34998..298234d6a1 100644 --- a/Lib/distutils/command/build_ext.py +++ b/Lib/distutils/command/build_ext.py -@@ -234,7 +234,10 @@ class build_ext(Command): +@@ -234,7 +234,10 @@ def finalize_options(self): if (sysconfig.get_config_var('Py_ENABLE_SHARED')): if not sysconfig.python_build: # building third party extensions @@ -39,10 +39,10 @@ index 1a9bd12..3cf7d67 100644 # building python standard extensions self.library_dirs.append('.') diff --git a/Lib/sysconfig.py b/Lib/sysconfig.py -index 95b48f6..9fb1956 100644 +index ebe3711827..6328ec41af 100644 --- a/Lib/sysconfig.py +++ b/Lib/sysconfig.py -@@ -123,10 +123,17 @@ _SCHEME_KEYS = ('stdlib', 'platstdlib', 'purelib', 'platlib', 'include', +@@ -168,10 +168,17 @@ def joinuser(*args): _PY_VERSION = sys.version.split()[0] _PY_VERSION_SHORT = f'{sys.version_info[0]}.{sys.version_info[1]}' _PY_VERSION_SHORT_NO_DOT = f'{sys.version_info[0]}{sys.version_info[1]}' @@ -65,5 +65,5 @@ index 95b48f6..9fb1956 100644 _USER_BASE = None -- -2.30.2 +2.34.1 diff --git a/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch b/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch index 3e224995a5..78b3ae596d 100644 --- a/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch +++ b/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch @@ -1,4 +1,4 @@ -From 60d71e37d167ea89445250be436170a6cfee84e7 Mon Sep 17 00:00:00 2001 +From 5d13e384b30a2c0b1c7b65718590b7fb0c3ba55e Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:36:00 +0100 Subject: [PATCH] Don't look in /usr/lib/termcap for libraries @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/setup.py b/setup.py -index 66d372a..e632b6f 100644 +index e496ee34c2..1904898165 100644 --- a/setup.py +++ b/setup.py -@@ -1147,12 +1147,9 @@ class PyBuildExt(build_ext): +@@ -1107,12 +1107,9 @@ def detect_readline_curses(self): pass # Issue 7384: Already linked against curses or tinfo. elif curses_library: readline_libs.append(curses_library) @@ -23,9 +23,9 @@ index 66d372a..e632b6f 100644 readline_libs.append('termcap') self.add(Extension('readline', ['readline.c'], - library_dirs=['/usr/lib/termcap'], - extra_link_args=readline_extra_link_args, libraries=readline_libs)) else: + self.missing.append('readline') -- -2.25.1 +2.34.1 diff --git a/package/python3/0006-Don-t-add-multiarch-paths.patch b/package/python3/0006-Don-t-add-multiarch-paths.patch index 48d8cc790e..749e295df1 100644 --- a/package/python3/0006-Don-t-add-multiarch-paths.patch +++ b/package/python3/0006-Don-t-add-multiarch-paths.patch @@ -1,4 +1,4 @@ -From f5933b8f973cd11698b52d535a10d0474e49f5a5 Mon Sep 17 00:00:00 2001 +From ad463b5d58ae79f69b011fb048861bd874d34369 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:36:27 +0100 Subject: [PATCH] Don't add multiarch paths @@ -17,10 +17,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/setup.py b/setup.py -index ec3ba60607..e27620035c 100644 +index 1904898165..32294546b6 100644 --- a/setup.py +++ b/setup.py -@@ -830,10 +830,10 @@ class PyBuildExt(build_ext): +@@ -852,10 +852,10 @@ def configure_compiler(self): if not CROSS_COMPILING: add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib') add_dir_to_list(self.compiler.include_dirs, '/usr/local/include') @@ -33,5 +33,5 @@ index ec3ba60607..e27620035c 100644 def init_inc_lib_dirs(self): -- -2.25.1 +2.34.1 diff --git a/package/python3/0007-Abort-on-failed-module-build.patch b/package/python3/0007-Abort-on-failed-module-build.patch index 32e2261a05..a473896127 100644 --- a/package/python3/0007-Abort-on-failed-module-build.patch +++ b/package/python3/0007-Abort-on-failed-module-build.patch @@ -1,4 +1,4 @@ -From 188c0ebfdb71f5252fa7701013b8d1209f28aef7 Mon Sep 17 00:00:00 2001 +From 60b1664a7acebadb1a3d6df871145147f33b5afe Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:43:24 +0100 Subject: [PATCH] Abort on failed module build @@ -14,10 +14,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+) diff --git a/setup.py b/setup.py -index e27620035c..d3f0e663f2 100644 +index 32294546b6..0e04944ce0 100644 --- a/setup.py +++ b/setup.py -@@ -561,6 +561,7 @@ class PyBuildExt(build_ext): +@@ -579,6 +579,7 @@ def print_three_column(lst): print("Failed to build these modules:") print_three_column(failed) print() @@ -26,5 +26,5 @@ index e27620035c..d3f0e663f2 100644 if self.failed_on_import: failed = self.failed_on_import[:] -- -2.25.1 +2.34.1 diff --git a/package/python3/0008-Serial-ioctl-workaround.patch b/package/python3/0008-Serial-ioctl-workaround.patch index df31cd6220..7722a04f38 100644 --- a/package/python3/0008-Serial-ioctl-workaround.patch +++ b/package/python3/0008-Serial-ioctl-workaround.patch @@ -1,4 +1,4 @@ -From 9e6211b0d6d4610e5fb7d2c7e1152eb7c64d968b Mon Sep 17 00:00:00 2001 +From 90f3075b629d90d942da1d22ef7563f7149f4f6c Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 23 Dec 2015 11:44:02 +0100 Subject: [PATCH] Serial ioctl() workaround @@ -15,7 +15,7 @@ Signed-off-by: Baruch Siach 1 file changed, 2 insertions(+) diff --git a/Modules/termios.c b/Modules/termios.c -index 75e5e52320..eefbddfe69 100644 +index 354e5ca18d..c08957c500 100644 --- a/Modules/termios.c +++ b/Modules/termios.c @@ -15,7 +15,9 @@ @@ -29,5 +29,5 @@ index 75e5e52320..eefbddfe69 100644 /* HP-UX requires that this be included to pick up MDCD, MCTS, MDSR, * MDTR, MRI, and MRTS (apparently used internally by some things -- -2.25.1 +2.34.1 diff --git a/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch b/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch index 8a77fe3708..eff8fc7694 100644 --- a/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch +++ b/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch @@ -1,4 +1,4 @@ -From cb595a591c71e0bf7c63a3706b0be45ac6a642e3 Mon Sep 17 00:00:00 2001 +From 2439bd2ed5dbdd7e5fda15adefd0f6f1b047ec1b Mon Sep 17 00:00:00 2001 From: Christophe Vu-Brugier Date: Wed, 23 Dec 2015 11:44:30 +0100 Subject: [PATCH] Do not adjust the shebang of Python scripts for @@ -21,7 +21,7 @@ diff --git a/Lib/distutils/command/build_scripts.py b/Lib/distutils/command/buil index ccc70e6465..d6d54195c1 100644 --- a/Lib/distutils/command/build_scripts.py +++ b/Lib/distutils/command/build_scripts.py -@@ -91,7 +91,7 @@ class build_scripts(Command): +@@ -91,7 +91,7 @@ def copy_scripts(self): adjust = True post_interp = match.group(1) or b'' @@ -31,5 +31,5 @@ index ccc70e6465..d6d54195c1 100644 self.build_dir) updated_files.append(outfile) -- -2.25.1 +2.34.1 diff --git a/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch b/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch index a1f9ab6cd9..f26ee85b61 100644 --- a/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch +++ b/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch @@ -1,4 +1,4 @@ -From eb51497e4b5799f8ab0277426d3e54414acb9d4b Mon Sep 17 00:00:00 2001 +From 55ef5552e4ee60266e3299f253bec3b13785e585 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 20 Nov 2014 13:24:59 +0100 Subject: [PATCH] Misc/python-config.sh.in: ensure sed invocations only match @@ -63,5 +63,5 @@ index 2602fe24c0..a1bc3cd5f7 100644 PYTHONFRAMEWORK="@PYTHONFRAMEWORK@" INCDIR="-I$includedir/python${VERSION}${ABIFLAGS}" -- -2.25.1 +2.34.1 diff --git a/package/python3/0011-Add-an-option-to-disable-pydoc.patch b/package/python3/0011-Add-an-option-to-disable-pydoc.patch index a843c8c126..f7bfd437bb 100644 --- a/package/python3/0011-Add-an-option-to-disable-pydoc.patch +++ b/package/python3/0011-Add-an-option-to-disable-pydoc.patch @@ -1,4 +1,4 @@ -From a65e5d3caf8e076d531191164c23c6240461f675 Mon Sep 17 00:00:00 2001 +From 38b7f7949258aeadf8bc45525be91340bb732a2a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:07:56 -0800 Subject: [PATCH] Add an option to disable pydoc @@ -19,10 +19,10 @@ Signed-off-by: Adam Duskett 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index c0d5511..32b3df7 100644 +index c1cfb96767..403380e181 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1391,7 +1391,9 @@ bininstall: altbininstall +@@ -1864,7 +1864,9 @@ bininstall: altbininstall -rm -f $(DESTDIR)$(BINDIR)/idle3 (cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3) -rm -f $(DESTDIR)$(BINDIR)/pydoc3 @@ -32,15 +32,15 @@ index c0d5511..32b3df7 100644 -rm -f $(DESTDIR)$(BINDIR)/2to3 (cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3) if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ -@@ -1442,7 +1444,6 @@ LIBSUBDIRS= asyncio \ +@@ -1915,7 +1917,6 @@ LIBSUBDIRS= asyncio \ lib2to3 lib2to3/fixes lib2to3/pgen2 \ logging \ multiprocessing multiprocessing/dummy \ - pydoc_data \ + re \ site-packages \ sqlite3 \ - tkinter \ -@@ -1530,6 +1531,10 @@ TESTSUBDIRS= ctypes/test \ +@@ -2008,6 +2009,10 @@ TESTSUBDIRS= ctypes/test \ tkinter/test/test_ttk \ unittest/test unittest/test/testmock @@ -49,15 +49,15 @@ index c0d5511..32b3df7 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 083a12d..9079531 100644 +index 5a6a1fe608..f68ea72321 100644 --- a/configure.ac +++ b/configure.ac -@@ -3373,6 +3373,12 @@ if test "$posix_threads" = "yes"; then - AC_CHECK_FUNCS(pthread_getcpuclockid) - fi +@@ -4171,6 +4171,12 @@ AS_VAR_IF([posix_threads], [stub], [ + AC_DEFINE([HAVE_PTHREAD_STUBS], [1], [Define if platform requires stubbed pthreads support]) + ]) +AC_SUBST(PYDOC) + @@ -65,14 +65,14 @@ index 083a12d..9079531 100644 + AS_HELP_STRING([--disable-pydoc], [disable pydoc]), + [ PYDOC="${enableval}" ], [ PYDOC=yes ]) + - # Check for enable-ipv6 AH_TEMPLATE(ENABLE_IPV6, [Define if --enable-ipv6 is specified]) + AC_MSG_CHECKING([if --enable-ipv6 is specified]) diff --git a/setup.py b/setup.py -index d00d389..d23f148 100644 +index 0e04944ce0..3e55f5b2e0 100644 --- a/setup.py +++ b/setup.py -@@ -2721,6 +2721,12 @@ def main(): +@@ -1593,6 +1593,12 @@ class DummyProcess: # turn off warnings when deprecated modules are imported import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -85,7 +85,7 @@ index d00d389..d23f148 100644 setup(# PyPI Metadata (PEP 301) name = "Python", version = sys.version.split()[0], -@@ -2746,8 +2752,7 @@ def main(): +@@ -1617,8 +1623,7 @@ class DummyProcess: # If you change the scripts installed here, you also need to # check the PyBuildScripts command above, and change the links # created by the bininstall target in Makefile.pre.in @@ -96,5 +96,5 @@ index d00d389..d23f148 100644 # --install-platlib -- -2.30.2 +2.34.1 diff --git a/package/python3/0012-Add-an-option-to-disable-lib2to3.patch b/package/python3/0012-Add-an-option-to-disable-lib2to3.patch index c8f2e528bf..0085d5a63f 100644 --- a/package/python3/0012-Add-an-option-to-disable-lib2to3.patch +++ b/package/python3/0012-Add-an-option-to-disable-lib2to3.patch @@ -1,4 +1,4 @@ -From f034b1b0f33a7bd4dde23f0bc1fa8e00e3518c9d Mon Sep 17 00:00:00 2001 +From 0e4f0a525ea0a68f6d4c5349c301da2e9b0c8ac9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:15:31 -0800 Subject: [PATCH] Add an option to disable lib2to3 @@ -14,15 +14,15 @@ Signed-off-by: Andrey Smirnov Signed-off-by: Adam Duskett --- Makefile.pre.in | 17 ++++++++++++----- - configure.ac | 5 +++++ + configure.ac | 6 ++++++ setup.py | 6 +++--- - 3 files changed, 20 insertions(+), 8 deletions(-) + 3 files changed, 21 insertions(+), 8 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 28cf88e..63fa9fb 100644 +index 403380e181..f5d0573067 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1395,7 +1395,9 @@ ifeq (@PYDOC@,yes) +@@ -1868,7 +1868,9 @@ ifeq (@PYDOC@,yes) (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) endif -rm -f $(DESTDIR)$(BINDIR)/2to3 @@ -32,15 +32,15 @@ index 28cf88e..63fa9fb 100644 if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ rm -f $(DESTDIR)$(BINDIR)/python3-32$(EXE); \ (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-32$(EXE) python3-32$(EXE)) \ -@@ -1441,7 +1443,6 @@ LIBSUBDIRS= asyncio \ +@@ -1914,7 +1916,6 @@ LIBSUBDIRS= asyncio \ idlelib idlelib/Icons \ - importlib importlib/metadata \ + importlib importlib/resources importlib/metadata \ json \ - lib2to3 lib2to3/fixes lib2to3/pgen2 \ logging \ multiprocessing multiprocessing/dummy \ - site-packages \ -@@ -1458,10 +1459,6 @@ LIBSUBDIRS= asyncio \ + re \ +@@ -1934,10 +1935,6 @@ LIBSUBDIRS= asyncio \ TESTSUBDIRS= ctypes/test \ distutils/tests \ idlelib/idle_test \ @@ -48,10 +48,10 @@ index 28cf88e..63fa9fb 100644 - lib2to3/tests/data \ - lib2to3/tests/data/fixers \ - lib2to3/tests/data/fixers/myfixes \ - sqlite3/test \ test test/audiodata \ test/capath test/cjkencodings \ -@@ -1535,6 +1532,14 @@ ifeq (@PYDOC@,yes) + test/data test/decimaltestdata \ +@@ -2013,6 +2010,14 @@ ifeq (@PYDOC@,yes) LIBSUBDIRS += pydoc_data endif @@ -64,9 +64,9 @@ index 28cf88e..63fa9fb 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ -@@ -1637,10 +1642,12 @@ ifeq (@PYC_BUILD@,yes) +@@ -2115,10 +2120,12 @@ ifeq (@PYC_BUILD@,yes) -j0 -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages endif @@ -80,26 +80,27 @@ index 28cf88e..63fa9fb 100644 # bpo-21536: Misc/python-config.sh is generated in the build directory # from $(srcdir)Misc/python-config.sh.in. diff --git a/configure.ac b/configure.ac -index 9079531..34c2ba9 100644 +index f68ea72321..d8e10cf2b2 100644 --- a/configure.ac +++ b/configure.ac -@@ -6014,6 +6014,11 @@ else - fi - AC_SUBST(TEST_MODULES) +@@ -7078,6 +7078,12 @@ PY_STDLIB_MOD([xxlimited_35], [test "$with_trace_refs" = "no"], [test "$ac_cv_fu + # substitute multiline block, must come after last PY_STDLIB_MOD() + AC_SUBST([MODULE_BLOCK]) +AC_SUBST(LIB2TO3) + +AC_ARG_ENABLE(lib2to3, + AS_HELP_STRING([--disable-lib2to3], [disable lib2to3]), + [ LIB2TO3="${enableval}" ], [ LIB2TO3=yes ]) - ++ # generate output files AC_CONFIG_FILES(Makefile.pre Misc/python.pc Misc/python-embed.pc Misc/python-config.sh) + AC_CONFIG_FILES([Modules/Setup.bootstrap Modules/Setup.stdlib]) diff --git a/setup.py b/setup.py -index d23f148..663fd44 100644 +index 3e55f5b2e0..c490b0b08f 100644 --- a/setup.py +++ b/setup.py -@@ -2722,11 +2722,11 @@ def main(): +@@ -1594,11 +1594,11 @@ class DummyProcess: import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -115,5 +116,5 @@ index d23f148..663fd44 100644 name = "Python", version = sys.version.split()[0], -- -2.30.2 +2.34.1 diff --git a/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch b/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch index 81fa52bb73..795ea3b898 100644 --- a/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch +++ b/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch @@ -1,4 +1,4 @@ -From dd2722dec08eb9c72c36313e93661eeca3ad64d8 Mon Sep 17 00:00:00 2001 +From ef8c030e01b1be8be582e90c31298a5863094858 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:20:45 -0800 Subject: [PATCH] Add option to disable the sqlite3 module @@ -10,49 +10,40 @@ Signed-off-by: Andrey Smirnov [ Adam Duskett: ported to Python 3.10.0 ] Signed-off-by: Adam Duskett --- - Makefile.pre.in | 7 +++++-- + Makefile.pre.in | 5 ++++- configure.ac | 9 +++++++++ - 2 files changed, 14 insertions(+), 2 deletions(-) + 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 5847029..5628860 100644 +index f5d0573067..9f4cdf14cf 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1446,7 +1446,6 @@ LIBSUBDIRS= asyncio \ - logging \ +@@ -1920,7 +1920,6 @@ LIBSUBDIRS= asyncio \ multiprocessing multiprocessing/dummy \ + re \ site-packages \ - sqlite3 \ tkinter \ + tomllib \ turtledemo \ - unittest \ -@@ -1459,7 +1458,6 @@ LIBSUBDIRS= asyncio \ - TESTSUBDIRS= ctypes/test \ - distutils/tests \ - idlelib/idle_test \ -- sqlite3/test \ - test test/audiodata \ - test/capath test/cjkencodings \ - test/data test/decimaltestdata \ -@@ -1540,6 +1538,11 @@ TESTSUBDIRS += lib2to3/tests \ +@@ -2018,6 +2017,10 @@ TESTSUBDIRS += lib2to3/tests \ lib2to3/tests/data/fixers/myfixes endif +ifeq (@SQLITE3@,yes) +LIBSUBDIRS += sqlite3 -+TESTSUBDIRS += sqlite3/test +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 34c2ba9..dfee472 100644 +index d8e10cf2b2..4cc0951ab9 100644 --- a/configure.ac +++ b/configure.ac -@@ -3373,6 +3373,15 @@ if test "$posix_threads" = "yes"; then - AC_CHECK_FUNCS(pthread_getcpuclockid) - fi +@@ -4171,6 +4171,15 @@ AS_VAR_IF([posix_threads], [stub], [ + AC_DEFINE([HAVE_PTHREAD_STUBS], [1], [Define if platform requires stubbed pthreads support]) + ]) +AC_SUBST(SQLITE3) +AC_ARG_ENABLE(sqlite3, @@ -67,5 +58,5 @@ index 34c2ba9..dfee472 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch b/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch index db79f5691f..04f7e34435 100644 --- a/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch +++ b/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch @@ -1,4 +1,4 @@ -From ad6b66b34f71ff6b60b3be5f6fd3e781cdeecd59 Mon Sep 17 00:00:00 2001 +From bbbfe699d648a5cb191203b16e1786e8cf4ea908 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:23:42 -0800 Subject: [PATCH] Add an option to disable the tk module @@ -15,18 +15,18 @@ Signed-off-by: Adam Duskett 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 5628860..c968113 100644 +index 9f4cdf14cf..4f83911200 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1446,7 +1446,6 @@ LIBSUBDIRS= asyncio \ - logging \ +@@ -1920,7 +1920,6 @@ LIBSUBDIRS= asyncio \ multiprocessing multiprocessing/dummy \ + re \ site-packages \ - tkinter \ + tomllib \ turtledemo \ unittest \ - urllib \ -@@ -1522,8 +1521,6 @@ TESTSUBDIRS= ctypes/test \ +@@ -2001,8 +2000,6 @@ TESTSUBDIRS= ctypes/test \ test/tracedmodules \ test/xmltestdata test/xmltestdata/c14n-20 \ test/ziptestdata \ @@ -35,8 +35,8 @@ index 5628860..c968113 100644 unittest/test unittest/test/testmock ifeq (@PYDOC@,yes) -@@ -1543,6 +1540,13 @@ LIBSUBDIRS += sqlite3 - TESTSUBDIRS += sqlite3/test +@@ -2021,6 +2018,13 @@ ifeq (@SQLITE3@,yes) + LIBSUBDIRS += sqlite3 endif +ifeq (@TK@,yes) @@ -47,13 +47,13 @@ index 5628860..c968113 100644 + + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index dfee472..dc76dff 100644 +index 4cc0951ab9..f4ce506801 100644 --- a/configure.ac +++ b/configure.ac -@@ -3382,6 +3382,15 @@ if test "$SQLITE3" = "no" ; then +@@ -4180,6 +4180,15 @@ if test "$SQLITE3" = "no" ; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _sqlite3" fi @@ -70,5 +70,5 @@ index dfee472..dc76dff 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch b/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch index 35d92fb7d1..da6f891104 100644 --- a/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch +++ b/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch @@ -1,4 +1,4 @@ -From 962deb43f5f340a8472d432ae8e6d61186f9040e Mon Sep 17 00:00:00 2001 +From 03e28cdd46dac1b7e4e9c8bbd2ea44b09e514205 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:31:51 -0800 Subject: [PATCH] Add an option to disable the curses module @@ -10,15 +10,15 @@ Signed-off-by: Andrey Smirnov [ Adam Duskett: ported to Python 3.10.0 ] Signed-off-by: Adam Duskett --- - Makefile.pre.in | 4 +++- + Makefile.pre.in | 4 +++- configure.ac | 9 +++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index c968113..f89f155 100644 +index 4f83911200..8e879b35c6 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1432,7 +1432,6 @@ LIBSUBDIRS= asyncio \ +@@ -1905,7 +1905,6 @@ LIBSUBDIRS= asyncio \ concurrent concurrent/futures \ csv \ ctypes ctypes/macholib \ @@ -26,7 +26,7 @@ index c968113..f89f155 100644 dbm \ distutils distutils/command \ email email/mime \ -@@ -1546,6 +1545,9 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \ +@@ -2024,6 +2023,9 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \ tkinter/test/test_ttk endif @@ -35,12 +35,12 @@ index c968113..f89f155 100644 +endif TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c diff --git a/configure.ac b/configure.ac -index dc76dff..4f1cda5 100644 +index f4ce506801..0ae9863cd6 100644 --- a/configure.ac +++ b/configure.ac -@@ -3391,6 +3391,15 @@ if test "$TK" = "no"; then +@@ -4189,6 +4189,15 @@ if test "$TK" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _tkinter" fi @@ -57,5 +57,5 @@ index dc76dff..4f1cda5 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0016-Add-an-option-to-disable-expat.patch b/package/python3/0016-Add-an-option-to-disable-expat.patch index 83c89e1f68..c30740762a 100644 --- a/package/python3/0016-Add-an-option-to-disable-expat.patch +++ b/package/python3/0016-Add-an-option-to-disable-expat.patch @@ -1,4 +1,4 @@ -From 7e0e7dc25f50acd6922493ae620ee5cbf107a79a Mon Sep 17 00:00:00 2001 +From c9a2ea3edacf57746517600ccc11c254a9fd6c48 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:40:45 -0800 Subject: [PATCH] Add an option to disable expat @@ -17,23 +17,22 @@ Signed-off-by: Andrey Smirnov Signed-off-by: Adam Duskett --- Makefile.pre.in | 5 ++++- - configure.ac | 18 +++++++++++++----- - setup.py | 2 +- - 3 files changed, 18 insertions(+), 7 deletions(-) + configure.ac | 20 ++++++++++++++------ + 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index f89f155..08c5e8a 100644 +index 8e879b35c6..80d617cf7f 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1450,7 +1450,6 @@ LIBSUBDIRS= asyncio \ +@@ -1925,7 +1925,6 @@ LIBSUBDIRS= asyncio \ urllib \ venv venv/scripts venv/scripts/common venv/scripts/posix \ wsgiref \ - $(XMLLIBSUBDIRS) \ xmlrpc \ - zoneinfo - TESTSUBDIRS= ctypes/test \ -@@ -1549,6 +1548,10 @@ ifeq (@CURSES@,yes) + zoneinfo \ + __phello__ +@@ -2027,6 +2026,10 @@ ifeq (@CURSES@,yes) LIBSUBDIRS += curses endif @@ -42,13 +41,13 @@ index f89f155..08c5e8a 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 4f1cda5..e99a174 100644 +index 0ae9863cd6..201cad0bfc 100644 --- a/configure.ac +++ b/configure.ac -@@ -3094,13 +3094,21 @@ PKG_PROG_PKG_CONFIG +@@ -3565,15 +3565,23 @@ LIBS="$withval $LIBS" AC_SUBST(DISABLED_EXTENSIONS) # Check for use of the system expat library @@ -64,7 +63,8 @@ index 4f1cda5..e99a174 100644 -AC_MSG_RESULT($with_system_expat) +AC_MSG_RESULT($with_expat) -+ + +-AS_VAR_IF([with_system_expat], [yes], [ +if test "$with_expat" != "none"; then + EXPAT=yes +else @@ -72,22 +72,11 @@ index 4f1cda5..e99a174 100644 + EXPAT=no +fi +AC_SUBST(EXPAT) - - # Check for use of the system libffi library - AC_MSG_CHECKING(for --with-system-ffi) -diff --git a/setup.py b/setup.py -index 663fd44..e30ed52 100644 ---- a/setup.py -+++ b/setup.py -@@ -1764,7 +1764,7 @@ class PyBuildExt(build_ext): - # - # More information on Expat can be found at www.libexpat.org. - # -- if '--with-system-expat' in sysconfig.get_config_var("CONFIG_ARGS"): -+ if '--with-expat=system' in sysconfig.get_config_var("CONFIG_ARGS"): - expat_inc = [] - define_macros = [] - extra_compile_args = [] ++ ++AS_VAR_IF([with_expat], [system], [ + LIBEXPAT_CFLAGS=${LIBEXPAT_CFLAGS-""} + LIBEXPAT_LDFLAGS=${LIBEXPAT_LDFLAGS-"-lexpat"} + LIBEXPAT_INTERNAL= -- -2.30.2 +2.34.1 diff --git a/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch b/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch index 2afcf4526d..63a07fb514 100644 --- a/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch +++ b/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch @@ -1,4 +1,4 @@ -From 2c0d31bb91fc7f94283c3ab632925fbbe24e94d6 Mon Sep 17 00:00:00 2001 +From d8ef6a7a9f2b954cf1c1e37fc3c35055b42af0f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:49:55 +0100 Subject: [PATCH] Add an option to disable CJK codecs @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 9ef0ecd42f..18e6fd70a0 100644 +index 201cad0bfc..ecdd7dbc07 100644 --- a/configure.ac +++ b/configure.ac -@@ -3390,6 +3390,12 @@ if test "$SQLITE3" = "no" ; then +@@ -4188,6 +4188,12 @@ if test "$SQLITE3" = "no" ; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _sqlite3" fi @@ -26,5 +26,5 @@ index 9ef0ecd42f..18e6fd70a0 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0018-Add-an-option-to-disable-NIS.patch b/package/python3/0018-Add-an-option-to-disable-NIS.patch index d8fe3616c0..977955d1cb 100644 --- a/package/python3/0018-Add-an-option-to-disable-NIS.patch +++ b/package/python3/0018-Add-an-option-to-disable-NIS.patch @@ -1,4 +1,4 @@ -From 2041d0c8dba87991edaf088b16e37b5189a3466d Mon Sep 17 00:00:00 2001 +From 09fc9f72ebe60bb65e80732a6bd4f12a84159f6d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:50:11 +0100 Subject: [PATCH] Add an option to disable NIS @@ -12,10 +12,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 18e6fd70a0..46d2a8131e 100644 +index ecdd7dbc07..1bdde7f69d 100644 --- a/configure.ac +++ b/configure.ac -@@ -3396,6 +3396,12 @@ AC_ARG_ENABLE(codecs-cjk, +@@ -4194,6 +4194,12 @@ AC_ARG_ENABLE(codecs-cjk, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _codecs_kr _codecs_jp _codecs_cn _codecs_tw _codecs_hk _codecs_iso2022" fi]) @@ -29,5 +29,5 @@ index 18e6fd70a0..46d2a8131e 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0019-Add-an-option-to-disable-unicodedata.patch b/package/python3/0019-Add-an-option-to-disable-unicodedata.patch index 3519377b5e..74702b67a5 100644 --- a/package/python3/0019-Add-an-option-to-disable-unicodedata.patch +++ b/package/python3/0019-Add-an-option-to-disable-unicodedata.patch @@ -1,4 +1,4 @@ -From dd82a401ff6ba4ba116bf4d520e981a1808ed443 Mon Sep 17 00:00:00 2001 +From 4fe7f375a3d171d294caebdd7b7ce49bbc9ad9f3 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:50:27 +0100 Subject: [PATCH] Add an option to disable unicodedata @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 46d2a8131e..5844e3b73f 100644 +index 1bdde7f69d..ba4b0e0c1c 100644 --- a/configure.ac +++ b/configure.ac -@@ -3402,6 +3402,12 @@ AC_ARG_ENABLE(nis, +@@ -4200,6 +4200,12 @@ AC_ARG_ENABLE(nis, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} nis" fi]) @@ -26,5 +26,5 @@ index 46d2a8131e..5844e3b73f 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0020-Add-an-option-to-disable-IDLE.patch b/package/python3/0020-Add-an-option-to-disable-IDLE.patch index f09037f7db..09b5f13cdb 100644 --- a/package/python3/0020-Add-an-option-to-disable-IDLE.patch +++ b/package/python3/0020-Add-an-option-to-disable-IDLE.patch @@ -1,4 +1,4 @@ -From f1b15834045d0641c43014b970721df066fa71f7 Mon Sep 17 00:00:00 2001 +From 2c9dbd6d49744aa8da8ebf8d0187d6b06f93c2b5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 22 Feb 2017 17:45:14 -0800 Subject: [PATCH] Add an option to disable IDLE @@ -18,10 +18,10 @@ Signed-off-by: Adam Duskett 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 08c5e8a..461c5e3 100644 +index 80d617cf7f..8d1ba1356c 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1389,7 +1389,9 @@ bininstall: altbininstall +@@ -1862,7 +1862,9 @@ bininstall: altbininstall -rm -f $(DESTDIR)$(LIBPC)/python3-embed.pc (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION)-embed.pc python3-embed.pc) -rm -f $(DESTDIR)$(BINDIR)/idle3 @@ -31,15 +31,15 @@ index 08c5e8a..461c5e3 100644 -rm -f $(DESTDIR)$(BINDIR)/pydoc3 ifeq (@PYDOC@,yes) (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) -@@ -1439,7 +1441,6 @@ LIBSUBDIRS= asyncio \ +@@ -1912,7 +1914,6 @@ LIBSUBDIRS= asyncio \ ensurepip ensurepip/_bundled \ html \ http \ - idlelib idlelib/Icons \ - importlib importlib/metadata \ + importlib importlib/resources importlib/metadata \ json \ logging \ -@@ -1552,6 +1553,10 @@ ifeq (@EXPAT@,yes) +@@ -2030,6 +2031,10 @@ ifeq (@EXPAT@,yes) LIBSUBDIRS += $(XMLLIBSUBDIRS) endif @@ -48,13 +48,13 @@ index 08c5e8a..461c5e3 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index e99a174..baaa743 100644 +index ba4b0e0c1c..5e6d72f7db 100644 --- a/configure.ac +++ b/configure.ac -@@ -6073,6 +6073,12 @@ AC_ARG_ENABLE(lib2to3, +@@ -7137,6 +7137,12 @@ AC_ARG_ENABLE(lib2to3, AS_HELP_STRING([--disable-lib2to3], [disable lib2to3]), [ LIB2TO3="${enableval}" ], [ LIB2TO3=yes ]) @@ -66,12 +66,12 @@ index e99a174..baaa743 100644 + # generate output files AC_CONFIG_FILES(Makefile.pre Misc/python.pc Misc/python-embed.pc Misc/python-config.sh) - AC_CONFIG_FILES([Modules/ld_so_aix], [chmod +x Modules/ld_so_aix]) + AC_CONFIG_FILES([Modules/Setup.bootstrap Modules/Setup.stdlib]) diff --git a/setup.py b/setup.py -index e30ed52..4dff249 100644 +index c490b0b08f..4d49a792f7 100644 --- a/setup.py +++ b/setup.py -@@ -2722,11 +2722,14 @@ def main(): +@@ -1594,11 +1594,14 @@ class DummyProcess: import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -88,5 +88,5 @@ index e30ed52..4dff249 100644 name = "Python", version = sys.version.split()[0], -- -2.30.2 +2.34.1 diff --git a/package/python3/0021-Add-an-option-to-disable-decimal.patch b/package/python3/0021-Add-an-option-to-disable-decimal.patch index fd1887d603..d683565f94 100644 --- a/package/python3/0021-Add-an-option-to-disable-decimal.patch +++ b/package/python3/0021-Add-an-option-to-disable-decimal.patch @@ -1,4 +1,4 @@ -From d5fe81cbd51da2a84ed89d1e4c80d921d4efce26 Mon Sep 17 00:00:00 2001 +From 7091fdf77f612425c178a75148560f9c3514e8b8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:51:31 +0100 Subject: [PATCH] Add an option to disable decimal @@ -14,15 +14,14 @@ Signed-off-by: Adam Duskett [james.hilliard1 at gmail.com: adapt to python 3.9] Signed-off-by: James Hilliard --- - configure.ac | 17 ++++++++++++----- - setup.py | 2 +- - 2 files changed, 13 insertions(+), 6 deletions(-) + configure.ac | 19 +++++++++++++------ + 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/configure.ac b/configure.ac -index 7bd4623ccd..e513ef6a20 100644 +index 5e6d72f7db..e6b1f1e9de 100644 --- a/configure.ac +++ b/configure.ac -@@ -3145,13 +3145,20 @@ fi +@@ -3630,14 +3630,21 @@ fi AC_SUBST(LIBFFI_INCLUDEDIR) # Check for use of the system libmpdec library @@ -34,9 +33,8 @@ index 7bd4623ccd..e513ef6a20 100644 + AS_HELP_STRING([--with-libmpdec], [select which libmpdec version to use: system, builtin, none]), [], - [with_system_libmpdec="no"]) -+ [with_libmpdec="builtin"]) - -AC_MSG_RESULT($with_system_libmpdec) ++ [with_libmpdec="builtin"]) +AC_MSG_RESULT($with_libmpdec) +if test "$with_libmpdec" != "none"; then + MPDEC=yes @@ -46,21 +44,11 @@ index 7bd4623ccd..e513ef6a20 100644 +fi +AC_SUBST(MPDEC) - # Check whether _decimal should use a coroutine-local or thread-local context - AC_MSG_CHECKING(for --with-decimal-contextvar) -diff --git a/setup.py b/setup.py -index c4ee989ba3..3d0c74bb7f 100644 ---- a/setup.py -+++ b/setup.py -@@ -2321,7 +2321,7 @@ class PyBuildExt(build_ext): - # Stefan Krah's _decimal module - extra_compile_args = [] - undef_macros = [] -- if '--with-system-libmpdec' in sysconfig.get_config_var("CONFIG_ARGS"): -+ if '--with-libmpdec=system' in sysconfig.get_config_var("CONFIG_ARGS"): - include_dirs = [] - libraries = ['mpdec'] - sources = ['_decimal/_decimal.c'] +-AS_VAR_IF([with_system_libmpdec], [yes], [ ++AS_VAR_IF([with_libmpdec], [system], [ + LIBMPDEC_CFLAGS=${LIBMPDEC_CFLAGS-""} + LIBMPDEC_LDFLAGS=${LIBMPDEC_LDFLAGS-"-lmpdec"} + LIBMPDEC_INTERNAL= -- -2.25.1 +2.34.1 diff --git a/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch b/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch index 0459b5a14d..56713a7f8f 100644 --- a/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch +++ b/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch @@ -1,4 +1,4 @@ -From 9bedc56d2a4b8856162650a11c1fcb6ec38f160b Mon Sep 17 00:00:00 2001 +From d48d9da534cec7891ae444b4ab94a76ac67f5daa Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:51:58 +0100 Subject: [PATCH] Add an option to disable the ossaudiodev module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index e513ef6a20..c07505e89e 100644 +index e6b1f1e9de..db33d567ad 100644 --- a/configure.ac +++ b/configure.ac -@@ -3175,6 +3175,12 @@ fi +@@ -3678,6 +3678,12 @@ fi AC_MSG_RESULT($with_decimal_contextvar) @@ -22,9 +22,9 @@ index e513ef6a20..c07505e89e 100644 + DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} ossaudiodev" + fi]) + - # Check for support for loadable sqlite extensions - AC_MSG_CHECKING(for --enable-loadable-sqlite-extensions) - AC_ARG_ENABLE(loadable-sqlite-extensions, + # Check for libmpdec machine flavor + AC_MSG_CHECKING(for decimal libmpdec machine) + AS_CASE([$ac_sys_system], -- -2.25.1 +2.34.1 diff --git a/package/python3/0023-Add-an-option-to-disable-openssl-support.patch b/package/python3/0023-Add-an-option-to-disable-openssl-support.patch index 4801a27300..d4c9fd43be 100644 --- a/package/python3/0023-Add-an-option-to-disable-openssl-support.patch +++ b/package/python3/0023-Add-an-option-to-disable-openssl-support.patch @@ -1,4 +1,4 @@ -From 90ed5c692b8b5596ca0b3ae1436276c8181251d8 Mon Sep 17 00:00:00 2001 +From 25c900e81a2fc0bbe35e7c94e2e5028cfbf6582a Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Wed, 22 Feb 2017 17:55:59 -0800 Subject: [PATCH] Add an option to disable openssl support. @@ -9,10 +9,10 @@ Signed-off-by: Nicolas Cavallari 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 08c148c..a81a24c 100644 +index db33d567ad..42fe6c8f5a 100644 --- a/configure.ac +++ b/configure.ac -@@ -3421,6 +3421,12 @@ AC_ARG_ENABLE(unicodedata, +@@ -4219,6 +4219,12 @@ AC_ARG_ENABLE(unicodedata, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} unicodedata" fi]) @@ -26,5 +26,5 @@ index 08c148c..a81a24c 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch b/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch index adb04d69ea..9250007dae 100644 --- a/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch +++ b/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch @@ -1,4 +1,4 @@ -From 049e7a51e1ffd0d28d6608c707ab4b54e816d338 Mon Sep 17 00:00:00 2001 +From 9082468ca620db77b670ccf568a96bbabb865f80 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 7 Mar 2017 23:29:05 +0100 Subject: [PATCH] Add an option to disable the readline module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index a81a24c..41a21ff 100644 +index 42fe6c8f5a..19875d7d30 100644 --- a/configure.ac +++ b/configure.ac -@@ -3427,6 +3427,12 @@ AC_ARG_ENABLE(openssl, +@@ -4225,6 +4225,12 @@ AC_ARG_ENABLE(openssl, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} ssl _ssl _hashlib" fi]) @@ -26,5 +26,5 @@ index a81a24c..41a21ff 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch b/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch index d466bc3a76..70a0d6cd15 100644 --- a/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch +++ b/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch @@ -1,4 +1,4 @@ -From 146730a04dfe98e3d7971ebf5410801ceae88e11 Mon Sep 17 00:00:00 2001 +From 988a335cb34b5fc25ea345ba04ff5ddffe2e946c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 7 Mar 2017 23:31:11 +0100 Subject: [PATCH] Add options to disable zlib, bzip2 and xz modules @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 18 insertions(+) diff --git a/configure.ac b/configure.ac -index 41a21ff..fa81bc7 100644 +index 19875d7d30..ca6c16491a 100644 --- a/configure.ac +++ b/configure.ac -@@ -3433,6 +3433,24 @@ AC_ARG_ENABLE(readline, +@@ -4231,6 +4231,24 @@ AC_ARG_ENABLE(readline, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} readline" fi]) @@ -38,5 +38,5 @@ index 41a21ff..fa81bc7 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch b/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch index 814a9d42e5..b6bfb010a0 100644 --- a/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch +++ b/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch @@ -1,4 +1,4 @@ -From 106d9378c61e7fa9cad0a63ba068668d54cd11b8 Mon Sep 17 00:00:00 2001 +From 755fb526a62df2a73560f42184db8aadb6899bb0 Mon Sep 17 00:00:00 2001 From: Matt Weber Date: Fri, 6 Oct 2017 09:54:15 -0500 Subject: [PATCH] python-config.sh: don't reassign ${prefix} @@ -27,7 +27,7 @@ Signed-off-by: Matthew Weber 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Misc/python-config.sh.in b/Misc/python-config.sh.in -index a1bc3cd..164d2d3 100644 +index a1bc3cd5f7..164d2d3603 100644 --- a/Misc/python-config.sh.in +++ b/Misc/python-config.sh.in @@ -31,7 +31,7 @@ prefix_real=$(installed_prefix "$0") @@ -49,5 +49,5 @@ index a1bc3cd..164d2d3 100644 SO="@EXT_SUFFIX@" PYTHONFRAMEWORK="@PYTHONFRAMEWORK@" -- -2.30.2 +2.34.1 diff --git a/package/python3/0028-Add-an-option-to-disable-uuid-module.patch b/package/python3/0027-Add-an-option-to-disable-uuid-module.patch similarity index 81% rename from package/python3/0028-Add-an-option-to-disable-uuid-module.patch rename to package/python3/0027-Add-an-option-to-disable-uuid-module.patch index fc4b64dc64..a9501ec189 100644 --- a/package/python3/0028-Add-an-option-to-disable-uuid-module.patch +++ b/package/python3/0027-Add-an-option-to-disable-uuid-module.patch @@ -1,4 +1,4 @@ -From 3bb693408eda77dda145ec5fecee56ea73031e9f Mon Sep 17 00:00:00 2001 +From 58027d25c3cabcf654cb0b31a61d7cbd53dc68c0 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 18 Aug 2018 10:54:56 +0200 Subject: [PATCH] Add an option to disable uuid module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 9 insertions(+) diff --git a/configure.ac b/configure.ac -index fa81bc7..4e733f6 100644 +index ca6c16491a..ed03b27fb1 100644 --- a/configure.ac +++ b/configure.ac -@@ -3469,6 +3469,15 @@ if test "$CURSES" = "no"; then +@@ -4267,6 +4267,15 @@ if test "$CURSES" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _curses _curses_panel" fi @@ -29,5 +29,5 @@ index fa81bc7..4e733f6 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch b/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch deleted file mode 100644 index d19aedb6c1..0000000000 --- a/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch +++ /dev/null @@ -1,43 +0,0 @@ -From d7b90b157eddefbd0ed59e35c90b083c0c03b644 Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Fri, 20 Jul 2018 10:17:39 -0400 -Subject: [PATCH] Fix cross compiling the uuid module - -Python 3.7 has a new _uuid module, however, the include directory -search path for uuid.h is hardcoded to /usr/include/uuid, which should -not be used when cross-compiling. - -To fix this, use the same solution as the one used by the NIS -detection: append "uuid" to each of the include directories in -"inc_dirs", instead of hardcoding /usr/include/uuid. - -Signed-off-by: Adam Duskett -[Thomas: drop STAGING_DIR based solution, use a solution similar to -the one used for the NIS detection.] -Signed-off-by: Thomas Petazzoni ---- - setup.py | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 3d0c74bb7f..c7be85f352 100644 ---- a/setup.py -+++ b/setup.py -@@ -1866,10 +1866,10 @@ class PyBuildExt(build_ext): - - def detect_uuid(self): - # Build the _uuid module if possible -- uuid_h = sysconfig.get_config_var("HAVE_UUID_H") -- uuid_uuid_h = sysconfig.get_config_var("HAVE_UUID_UUID_H") -- if uuid_h or uuid_uuid_h: -- if sysconfig.get_config_var("HAVE_LIBUUID"): -+ uuid_h = find_file("uuid.h", self.inc_dirs, -+ [os.path.join(inc_dir, 'uuid') for inc_dir in self.inc_dirs]) -+ if uuid_h is not None: -+ if self.compiler.find_library_file(self.lib_dirs, 'uuid'): - uuid_libs = ["uuid"] - else: - uuid_libs = [] --- -2.25.1 - diff --git a/package/python3/0028-fix-building-on-older-distributions.patch b/package/python3/0028-fix-building-on-older-distributions.patch new file mode 100644 index 0000000000..4541b31c5f --- /dev/null +++ b/package/python3/0028-fix-building-on-older-distributions.patch @@ -0,0 +1,47 @@ +From e52e2c5e3df4bc3d2ff07ecb3b8e2a9099ea1631 Mon Sep 17 00:00:00 2001 +From: Adam Duskett +Date: Thu, 16 Aug 2018 14:52:37 -0700 +Subject: [PATCH] fix building on older distributions + +Python > 3.6.3 calls os.replace in the update_file.py script, during the +regen-importlib phase of the build process. + +According to Doc/whatsnew/3.3.rst line 1631, os.replace acts in the same +way as os.rename, however, it is now cross-platform compatible for Windows. + +Because BuildRoot is guaranteed only to be built in POSIX environment, it is +safe to change os.replace back to os.rename. + +This change fixes building on older systems such as CentOS7, that only come +with python 2. + +Signed-off-by: Adam Duskett +--- + Tools/scripts/update_file.py | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/Tools/scripts/update_file.py b/Tools/scripts/update_file.py +index b4182c1d0c..ab443cb1a6 100644 +--- a/Tools/scripts/update_file.py ++++ b/Tools/scripts/update_file.py +@@ -53,7 +53,7 @@ def update_file_with_tmpfile(filename, tmpfile, *, create=False): + if not create: + raise # re-raise + outcome = 'created' +- os.replace(tmpfile, filename) ++ os.rename(tmpfile, filename) + else: + with targetfile: + old_contents = targetfile.read() +@@ -62,7 +62,7 @@ def update_file_with_tmpfile(filename, tmpfile, *, create=False): + # Now compare! + if old_contents != new_contents: + outcome = 'updated' +- os.replace(tmpfile, filename) ++ os.rename(tmpfile, filename) + else: + outcome = 'same' + os.unlink(tmpfile) +-- +2.34.1 + diff --git a/package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch b/package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch similarity index 91% rename from package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch rename to package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch index eff010fa22..5253076d90 100644 --- a/package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch +++ b/package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch @@ -1,4 +1,4 @@ -From d009b0142f77881dd75ff760fec728dbc8581a03 Mon Sep 17 00:00:00 2001 +From 07b950aadd570b9f96a1f128505a959b32f40962 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Fri, 2 Aug 2019 15:53:16 +0200 Subject: [PATCH] configure.ac: fixup $CC --print-multiarch output for @@ -30,10 +30,10 @@ Signed-off-by: Peter Korsgaard 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac -index 913051c276..aba03f3779 100644 +index ed03b27fb1..841fd6732c 100644 --- a/configure.ac +++ b/configure.ac -@@ -876,7 +876,11 @@ AC_MSG_CHECKING([for multiarch]) +@@ -1086,7 +1086,11 @@ AC_MSG_CHECKING([for multiarch]) AS_CASE([$ac_sys_system], [Darwin*], [MULTIARCH=""], [FreeBSD*], [MULTIARCH=""], @@ -47,5 +47,5 @@ index 913051c276..aba03f3779 100644 AC_SUBST([MULTIARCH]) AC_MSG_RESULT([$MULTIARCH]) -- -2.20.1 +2.34.1 diff --git a/package/python3/0029-fix-building-on-older-distributions.patch b/package/python3/0029-fix-building-on-older-distributions.patch deleted file mode 100644 index fb59e593f4..0000000000 --- a/package/python3/0029-fix-building-on-older-distributions.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 94c62f96ca61f1a28124c837d7ec5ed0b9ae8786 Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Thu, 16 Aug 2018 14:52:37 -0700 -Subject: [PATCH] fix building on older distributions - -Python > 3.6.3 calls os.replace in the update_file.py script, during the -regen-importlib phase of the build process. - -According to Doc/whatsnew/3.3.rst line 1631, os.replace acts in the same -way as os.rename, however, it is now cross-platform compatible for Windows. - -Because BuildRoot is guaranteed only to be built in POSIX environment, it is -safe to change os.replace back to os.rename. - -This change fixes building on older systems such as CentOS7, that only come -with python 2. - -Signed-off-by: Adam Duskett ---- - Tools/scripts/update_file.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/Tools/scripts/update_file.py b/Tools/scripts/update_file.py -index 224585c69b..ef458c0c63 100644 ---- a/Tools/scripts/update_file.py -+++ b/Tools/scripts/update_file.py -@@ -16,7 +16,7 @@ def main(old_path, new_path): - with open(new_path, 'rb') as f: - new_contents = f.read() - if old_contents != new_contents: -- os.replace(new_path, old_path) -+ os.rename(new_path, old_path) - else: - os.unlink(new_path) - --- -2.25.1 - diff --git a/package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch b/package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch similarity index 80% rename from package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch rename to package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch index 0c0d51a7eb..5fb436db59 100644 --- a/package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch +++ b/package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch @@ -1,4 +1,4 @@ -From cf4d7fd9f7cb6c1ced32ee323b2b5755640051b7 Mon Sep 17 00:00:00 2001 +From 67e9793d070ac5c8e83abbe95b9208533ffeadd0 Mon Sep 17 00:00:00 2001 From: Bernd Kuhls Date: Sat, 11 Apr 2020 22:01:40 +0200 Subject: [PATCH] Add an option to disable the berkeleydb module @@ -9,10 +9,10 @@ Signed-off-by: Bernd Kuhls 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 4e733f6..1e52f30 100644 +index 841fd6732c..06c9a81f95 100644 --- a/configure.ac +++ b/configure.ac -@@ -3480,6 +3480,12 @@ if test "$UUID" = "no"; then +@@ -4280,6 +4280,12 @@ if test "$UUID" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _uuid" fi @@ -26,5 +26,5 @@ index 4e733f6..1e52f30 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch b/package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch similarity index 89% rename from package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch rename to package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch index 0458283c18..712fd08fb1 100644 --- a/package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch +++ b/package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch @@ -1,4 +1,4 @@ -From 3c83eedcc2df3ecf6c4a17953ca24dff60c1378e Mon Sep 17 00:00:00 2001 +From 3edeed879871a10acbe802f4a68cff3d4869dbde Mon Sep 17 00:00:00 2001 From: Romain Naour Date: Thu, 12 Nov 2020 00:16:18 +0100 Subject: [PATCH] lib/crypt: uClibc-ng doesn't set errno when encryption method @@ -23,10 +23,10 @@ Signed-off-by: Daniel Lang 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Lib/crypt.py b/Lib/crypt.py -index 33dbc46bb3..4692a5270c 100644 +index de4a14a388..ba482487a7 100644 --- a/Lib/crypt.py +++ b/Lib/crypt.py -@@ -94,7 +94,9 @@ def _add_method(name, *args, rounds=None): +@@ -98,7 +98,9 @@ def _add_method(name, *args, rounds=None): result = crypt('', salt) except OSError as e: # Not all libc libraries support all encryption methods. @@ -38,5 +38,5 @@ index 33dbc46bb3..4692a5270c 100644 raise if result and len(result) == method.total_size: -- -2.25.4 +2.34.1 diff --git a/package/python3/python3.hash b/package/python3/python3.hash index f9b8e2ec8d..c4ee79305d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz -sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE +sha256 a57dc82d77358617ba65b9841cee1e3b441f386c3789ddc0676eca077f2951c3 Python-3.11.0.tar.xz +sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index 4131941e11..50d125ba16 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 +PYTHON3_VERSION_MAJOR = 3.11 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).0 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others @@ -41,7 +41,12 @@ HOST_PYTHON3_CONF_ENV += \ PYTHON3_DEPENDENCIES = host-python3 libffi -HOST_PYTHON3_DEPENDENCIES = host-autoconf-archive host-expat host-zlib host-libffi +HOST_PYTHON3_DEPENDENCIES = \ + host-autoconf-archive \ + host-expat \ + host-libffi \ + host-pkgconf \ + host-zlib ifeq ($(BR2_PACKAGE_HOST_PYTHON3_BZIP2),y) HOST_PYTHON3_DEPENDENCIES += host-bzip2 @@ -174,6 +179,7 @@ endif PYTHON3_CONF_OPTS += \ --without-ensurepip \ --without-cxx-main \ + --with-build-python=$(HOST_DIR)/bin/python3 \ --with-system-ffi \ --disable-pydoc \ --disable-test-modules \ -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 14:29:29 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 08:29:29 -0600 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 Message-ID: <20221025142929.3089316-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/kmod/kmod.hash | 2 +- package/kmod/kmod.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmod/kmod.hash b/package/kmod/kmod.hash index c68e41f1b6..b181f73e9b 100644 --- a/package/kmod/kmod.hash +++ b/package/kmod/kmod.hash @@ -1,5 +1,5 @@ # From https://www.kernel.org/pub/linux/utils/kernel/kmod/sha256sums.asc -sha256 0b80eea7aa184ac6fd20cafa2a1fdf290ffecc70869a797079e2cc5c6225a52a kmod-29.tar.xz +sha256 f897dd72698dc6ac1ef03255cd0a5734ad932318e4adbaebc7338ef2f5202f9f kmod-30.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 libkmod/COPYING diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..5d6d4408f9 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -4,7 +4,7 @@ # ################################################################################ -KMOD_VERSION = 29 +KMOD_VERSION = 30 KMOD_SOURCE = kmod-$(KMOD_VERSION).tar.xz KMOD_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/kmod KMOD_INSTALL_STAGING = YES -- 2.34.1 From eero.aaltonen at vaisala.com Tue Oct 25 14:57:27 2022 From: eero.aaltonen at vaisala.com (Aaltonen Eero) Date: Tue, 25 Oct 2022 14:57:27 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022082645.20505-1-neal.frager@amd.com> References: <20221022082645.20505-1-neal.frager@amd.com> Message-ID: <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> On Sat, 2022-10-22 at 02:26 -0600, Neal Frager via buildroot wrote: > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. AFAIU, this should also have a bootgen.hash file https://nightly.buildroot.org/#adding-packages-hash -- Regards, Eero From neal.frager at amd.com Tue Oct 25 15:00:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 15:00:16 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> References: <20221022082645.20505-1-neal.frager@amd.com> <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> Message-ID: <458C9F7A-80E7-4D46-95AF-8953F724EEBC@amd.com> Hi Eero, > Le 25 oct. 2022 ? 16:57, Aaltonen Eero a ?crit : > > ?On Sat, 2022-10-22 at 02:26 -0600, Neal Frager via buildroot wrote: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. > > AFAIU, this should also have a bootgen.hash file > https://nightly.buildroot.org/#adding-packages-hash > > -- > Regards, > Eero Yes, this is superseded with v2 of the patch which has a hash file. Thank you for your feedback. Best regards, Neal Frager AMD From james.hilliard1 at gmail.com Tue Oct 25 15:00:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 09:00:48 -0600 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: add new host-pkgconf dependency Message-ID: <20221025150048.3640674-1-james.hilliard1@gmail.com> After updating to version 0.17 we need host-pkgconf. Fixes: - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 Signed-off-by: James Hilliard --- package/libpciaccess/libpciaccess.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index 68d46b7f50..525a3bcd02 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -10,6 +10,7 @@ LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING LIBPCIACCESS_INSTALL_STAGING = YES +LIBPCIACCESS_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_ZLIB),y) LIBPCIACCESS_CONF_OPTS += --with-zlib -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 18:06:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 12:06:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/zbar: fix python 3.11 compatibility Message-ID: <20221025180603.886122-1-james.hilliard1@gmail.com> Add a patch from upstream pull request to fix build with python 3.11. Fixes: python/enum.c: In function ?enumitem_new?: python/enum.c:55:25: error: lvalue required as left operand of assignment 55 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ python/enum.c: In function ?zbarEnumItem_New?: python/enum.c:146:25: error: lvalue required as left operand of assignment 146 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ Signed-off-by: James Hilliard --- ...ython-enum-fix-build-for-Python-3.11.patch | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch diff --git a/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch new file mode 100644 index 0000000000..f525b62184 --- /dev/null +++ b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch @@ -0,0 +1,62 @@ +From fbaec4b4e6fe735efe6916fe5b92805a0d96bf8a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?= + +Date: Wed, 21 Sep 2022 10:32:11 +0700 +Subject: [PATCH] python: enum: fix build for Python 3.11 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Python 3.9 introduced Py_SET_SIZE function to set size instead of +relying on Py_SIZE() as a macro [3.9]. + +Python 3.10 started to encourage to use Py_SET_SIZE instead of +assigning into return value of Py_SIZE [3.10]. + +Python 3.11 flips the switch, turn Py_SIZE into a function [3.11], +thus Py_SIZE(obj) will be a rvalue. We need to use Py_SET_SIZE +to set size now. + +[3.9]: https://docs.python.org/3.9/c-api/structures.html#c.Py_SET_SIZE +[3.10]: https://docs.python.org/3.10/c-api/structures.html#c.Py_SIZE +[3.11]: https://docs.python.org/3.11/c-api/structures.html#c.Py_SIZE + +Signed-off-by: ?o?n Tr?n C?ng Danh +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/mchehab/zbar/pull/231] +--- + python/enum.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/python/enum.c b/python/enum.c +index dfe1b1e..946344f 100644 +--- a/python/enum.c ++++ b/python/enum.c +@@ -52,7 +52,11 @@ enumitem_new (PyTypeObject *type, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + #else +@@ -143,7 +147,11 @@ zbarEnumItem_New (PyObject *byname, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + +-- +2.34.1 + -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/lirc-tools: bump to version 0.10.2 In-Reply-To: <20221023141706.197964-1-fontaine.fabrice@gmail.com> References: <20221023141706.197964-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202244.70c4556f@windsurf> On Sun, 23 Oct 2022 16:17:06 +0200 Fabrice Fontaine wrote: > - Drop first to third patches (already in version) > - Add a patch to disable documentation and avoid a build failure without > doxygen > > https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS > > Signed-off-by: Fabrice Fontaine > --- > .../0001-Fix-build-without-Python.patch | 63 ------------------- > ...evinput.c-fix-build-with-musl-1.2.0.patch} | 0 > ...0002-Fix-python-client-cross-compile.patch | 47 -------------- > ...002-configure-add-disable-doc-option.patch | 52 +++++++++++++++ > ...irc-version-detection-when-cross-com.patch | 51 --------------- > package/lirc-tools/lirc-tools.hash | 8 +-- > package/lirc-tools/lirc-tools.mk | 2 +- > 7 files changed, 57 insertions(+), 166 deletions(-) > delete mode 100644 package/lirc-tools/0001-Fix-build-without-Python.patch > rename package/lirc-tools/{0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch => 0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch} (100%) > delete mode 100644 package/lirc-tools/0002-Fix-python-client-cross-compile.patch > create mode 100644 package/lirc-tools/0002-configure-add-disable-doc-option.patch > delete mode 100644 package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 In-Reply-To: <20221023165026.13707-1-fontaine.fabrice@gmail.com> References: <20221023165026.13707-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202250.656b2750@windsurf> On Sun, 23 Oct 2022 18:50:26 +0200 Fabrice Fontaine wrote: > - Drop all patches (already in version) > - Replace README by LICENSE file added with > https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/releases/tag/v1.2.13 > > Signed-off-by: Fabrice Fontaine > --- > ...hat-discarded-provided-CC-definition.patch | 28 --------------- > package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ------------------- > .../0003-fix-CVE-2022-37434-regression.patch | 32 ----------------- > package/libzlib/libzlib.hash | 4 +-- > package/libzlib/libzlib.mk | 7 ++-- > 5 files changed, 4 insertions(+), 102 deletions(-) > delete mode 100644 package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch > delete mode 100644 package/libzlib/0002-fix-CVE-2022-37434.patch > delete mode 100644 package/libzlib/0003-fix-CVE-2022-37434-regression.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxmlpp: bump to version 5.0.2 In-Reply-To: <20221023165758.24401-1-fontaine.fabrice@gmail.com> References: <20221023165758.24401-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202255.3177ab1d@windsurf> On Sun, 23 Oct 2022 18:57:58 +0200 Fabrice Fontaine wrote: > https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libxmlpp/libxmlpp.hash | 4 ++-- > package/libxmlpp/libxmlpp.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/libssh: bump to version 0.10.4 In-Reply-To: <20221023170441.30650-1-fontaine.fabrice@gmail.com> References: <20221023170441.30650-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202300.3258e142@windsurf> On Sun, 23 Oct 2022 19:04:41 +0200 Fabrice Fontaine wrote: > https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 > > Signed-off-by: Fabrice Fontaine > --- > package/libssh/libssh.hash | 4 ++-- > package/libssh/libssh.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/libshout: bump to version 2.4.6 In-Reply-To: <20221023204044.23467-1-fontaine.fabrice@gmail.com> References: <20221023204044.23467-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202305.4429d5ef@windsurf> On Sun, 23 Oct 2022 22:40:44 +0200 Fabrice Fontaine wrote: > - Drop patch (already in version) and so autoreconf > - libvorbis is optional since > https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f > > https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS > > Signed-off-by: Fabrice Fontaine > --- > ...re.ac-add-an-option-to-disable-tools.patch | 51 ------------------- > package/libshout/Config.in | 1 - > package/libshout/libshout.hash | 4 +- > package/libshout/libshout.mk | 13 +++-- > 4 files changed, 11 insertions(+), 58 deletions(-) > delete mode 100644 package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpng: bump to version 1.6.38 In-Reply-To: <20221023204719.31316-1-fontaine.fabrice@gmail.com> References: <20221023204719.31316-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202309.506460be@windsurf> On Sun, 23 Oct 2022 22:47:19 +0200 Fabrice Fontaine wrote: > Version 1.6.38 [September 14, 2022] > Added configurations and scripts for continuous integration. > Fixed various errors in the handling of tRNS, hIST and eXIf. > Implemented many stability improvements across all platforms. > Updated the internal documentation. > > Update hash of LICENSE file (update in year with > https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) > > https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES > > Signed-off-by: Fabrice Fontaine > --- > package/libpng/libpng.hash | 10 +++++----- > package/libpng/libpng.mk | 2 +- > 2 files changed, 6 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/libminiupnpc: bump to version 2.2.4 In-Reply-To: <20221023205440.36753-1-fontaine.fabrice@gmail.com> References: <20221023205440.36753-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202315.1372ec80@windsurf> On Sun, 23 Oct 2022 22:54:40 +0200 Fabrice Fontaine wrote: > 2022/02/20: > upnpc: use of @ to replace local lan address > > 2021/11/09: > python module : Allow to specify the root description url > > - Drop patch (already in version) > - Update hash of LICENSE file (license "refined" for github with > https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) > > http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz > > Signed-off-by: Fabrice Fontaine > --- > ...akeLists-txt-fix-install-for-headers.patch | 43 ------------------- > package/libminiupnpc/libminiupnpc.hash | 4 +- > package/libminiupnpc/libminiupnpc.mk | 2 +- > 3 files changed, 3 insertions(+), 46 deletions(-) > delete mode 100644 package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/lensfun: bump to version 0.3.3 In-Reply-To: <20221023210951.48256-1-fontaine.fabrice@gmail.com> References: <20221023210951.48256-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202320.1dffc4a8@windsurf> On Sun, 23 Oct 2022 23:09:51 +0200 Fabrice Fontaine wrote: > Switch to new upstream site to get latest release > > https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ > > Signed-off-by: Fabrice Fontaine > --- > package/lensfun/Config.in | 2 +- > package/lensfun/lensfun.hash | 5 +---- > package/lensfun/lensfun.mk | 4 ++-- > 3 files changed, 4 insertions(+), 7 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: bump to version 2.1.8 In-Reply-To: <20221023212956.60845-1-fontaine.fabrice@gmail.com> References: <20221023212956.60845-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202326.30dd4283@windsurf> On Sun, 23 Oct 2022 23:29:56 +0200 Fabrice Fontaine wrote: > 2.1.8 (as of August 5th, 2022) > ------------------------------ > - Add support for --bounceback to perform a repsonsiveness test (see man > page for other options) > - add support for working loads with --bounceback > - Fix to wait_tick with Mac OS X > - Various python pyflows commits > - add support for client side tcp-write-time histograms and mean/min/max > - add support for human readable dscp or -T values (see man page) > - udp_accept no longer accepts packets from a previous run as a new > connection, this can occur with long network delays > - multiple isoch bug fixes for both UDP and TCP > - isoch server provides mean/min/max/stdev for both frames and packets > - UDP max MTU discovery, requires configure.ac will support > --enable-discover-defaultlen prior to compile Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf3: bump to version 3.12 In-Reply-To: <20221023214220.70941-1-fontaine.fabrice@gmail.com> References: <20221023214220.70941-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202330.64f8e443@windsurf> On Sun, 23 Oct 2022 23:42:20 +0200 Fabrice Fontaine wrote: > Update hash of LICENSE file (update in year with > https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) > > https://github.com/esnet/iperf/blob/3.12/RELNOTES.md > > Signed-off-by: Fabrice Fontaine > --- > package/iperf3/iperf3.hash | 6 +++--- > package/iperf3/iperf3.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: bump to version 5.43 In-Reply-To: <20221023214902.85185-1-fontaine.fabrice@gmail.com> References: <20221023214902.85185-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202335.4f4dcb67@windsurf> On Sun, 23 Oct 2022 23:49:02 +0200 Fabrice Fontaine wrote: > Update hash of src/vasprintf.c (typo fixed with > https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) > > https://github.com/file/file/blob/FILE5_43/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/file/file.hash | 6 +++--- > package/file/file.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From buildroot at heine.tech Tue Oct 25 18:24:11 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 20:24:11 +0200 Subject: [Buildroot] [PATCH] package/grpc: bump to version 1.50.0 Message-ID: <20221025182419.250668-1-buildroot@heine.tech> drop cross-compile patch which is now upstream (again). Signed-off-by: Michael Nosthoff --- ...conditionally-downloading-api-repos.patch} | 0 .../0004-fix-grpc-plugin-cross-compile.patch | 43 ------------------- package/grpc/grpc.hash | 2 +- package/grpc/grpc.mk | 2 +- 4 files changed, 2 insertions(+), 45 deletions(-) rename package/grpc/{0005-disable-unconditionally-downloading-api-repos.patch => 0004-disable-unconditionally-downloading-api-repos.patch} (100%) delete mode 100644 package/grpc/0004-fix-grpc-plugin-cross-compile.patch diff --git a/package/grpc/0005-disable-unconditionally-downloading-api-repos.patch b/package/grpc/0004-disable-unconditionally-downloading-api-repos.patch similarity index 100% rename from package/grpc/0005-disable-unconditionally-downloading-api-repos.patch rename to package/grpc/0004-disable-unconditionally-downloading-api-repos.patch diff --git a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch b/package/grpc/0004-fix-grpc-plugin-cross-compile.patch deleted file mode 100644 index d4e18a7853..0000000000 --- a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 6798193f062676fddf7fee6d0c928f8ce6d92894 Mon Sep 17 00:00:00 2001 -From: Michael Nosthoff -Date: Thu, 21 Jul 2022 22:14:32 +0200 -Subject: [PATCH] cmake: fix cross-compilation with - gRPC_BUILD_GRPC_CPP_PLUGIN=OFF - -commit 99752b173cfa reintroduced the cross-compilation issue which was fixed by da10b795e177 - -upstream PR: https://github.com/grpc/grpc/pull/30378 - -Signed-off-by: Michael Nosthoff - ---- - CMakeLists.txt | 2 +- - templates/CMakeLists.txt.template | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 9cad96a12f95..11e7ae2b67df 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -514,7 +514,7 @@ function(protobuf_generate_grpc_cpp_with_import_path_correction FILE_LOCATION IM - --plugin=protoc-gen-grpc=${_gRPC_CPP_PLUGIN} - ${_protobuf_include_path} - ${REL_FIL} -- DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} ${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY ${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for ${IMPORT_PATH}" - VERBATIM) -diff --git a/templates/CMakeLists.txt.template b/templates/CMakeLists.txt.template -index 161cf46798f1..82fe4217913a 100644 ---- a/templates/CMakeLists.txt.template -+++ b/templates/CMakeLists.txt.template -@@ -498,7 +498,7 @@ - --plugin=protoc-gen-grpc=<%text>${_gRPC_CPP_PLUGIN} - <%text>${_protobuf_include_path} - <%text>${REL_FIL} -- DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} <%text>${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY <%text>${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for <%text>${IMPORT_PATH}" - VERBATIM) diff --git a/package/grpc/grpc.hash b/package/grpc/grpc.hash index 9ef976a60a..4d838703cc 100644 --- a/package/grpc/grpc.hash +++ b/package/grpc/grpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 5071b630e2a14707ad060636990f1b25b0984bd168c7ea1ab95e48a3bdc0081f grpc-1.49.1.tar.gz +sha256 76900ab068da86378395a8e125b5cc43dfae671e09ff6462ddfef18676e2165a grpc-1.50.0.tar.gz sha256 590198e3f305f2c347fde64d637c65492bbef554db6c8364e149cd375e3797ee LICENSE diff --git a/package/grpc/grpc.mk b/package/grpc/grpc.mk index 5f28e86113..9aac241e47 100644 --- a/package/grpc/grpc.mk +++ b/package/grpc/grpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRPC_VERSION = 1.49.1 +GRPC_VERSION = 1.50.0 GRPC_SITE = $(call github,grpc,grpc,v$(GRPC_VERSION)) GRPC_LICENSE = Apache-2.0, BSD-3-Clause (third_party code), MPL-2.0 (etc/roots.pem) GRPC_LICENSE_FILES = LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:39:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:39:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 In-Reply-To: <20221021223144.116049-1-fontaine.fabrice@gmail.com> References: <20221021223144.116049-1-fontaine.fabrice@gmail.com> Message-ID: <20221025203913.5d74f83d@windsurf> On Sat, 22 Oct 2022 00:31:44 +0200 Fabrice Fontaine wrote: > https://github.com/drowe67/codec2/releases/tag/v1.0.3 > https://github.com/drowe67/codec2/releases/tag/v1.0.4 > https://github.com/drowe67/codec2/releases/tag/v1.0.5 > > Signed-off-by: Fabrice Fontaine > --- > package/libcodec2/libcodec2.hash | 2 +- > package/libcodec2/libcodec2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) This update is apparently causing quite some breakage: http://autobuild.buildroot.net/?reason=libcodec2-1.0.5 Could you have a look perhaps? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From buildroot at heine.tech Tue Oct 25 18:50:39 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 20:50:39 +0200 Subject: [Buildroot] [PATCH] package/{python-}protobuf: bump to version 21.8 Message-ID: <20221025185040.317759-1-buildroot@heine.tech> Signed-off-by: Michael Nosthoff --- package/protobuf/protobuf.hash | 2 +- package/protobuf/protobuf.mk | 2 +- package/python-protobuf/python-protobuf.hash | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/protobuf/protobuf.hash b/package/protobuf/protobuf.hash index 03138a59e7..24dbc0f1a1 100644 --- a/package/protobuf/protobuf.hash +++ b/package/protobuf/protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -sha256 a3c4c104b98a21a577ce5ecc0d9b9f43a359b917d0bcf69467b70dc27416dfdc protobuf-cpp-3.21.6.tar.gz +sha256 f6251f2d00aad41b34c1dfa3d752713cb1bb1b7020108168a4deaa206ba8ed42 protobuf-cpp-3.21.8.tar.gz diff --git a/package/protobuf/protobuf.mk b/package/protobuf/protobuf.mk index fbc495c438..88f359f24c 100644 --- a/package/protobuf/protobuf.mk +++ b/package/protobuf/protobuf.mk @@ -7,7 +7,7 @@ # When bumping this package, make sure to also verify if the # python-protobuf package still works and to update its hash, # as they share the same version/site variables. -PROTOBUF_VERSION = 21.6 +PROTOBUF_VERSION = 21.8 PROTOBUF_SOURCE = protobuf-cpp-3.$(PROTOBUF_VERSION).tar.gz PROTOBUF_SITE = https://github.com/protocolbuffers/protobuf/releases/download/v$(PROTOBUF_VERSION) PROTOBUF_LICENSE = BSD-3-Clause diff --git a/package/python-protobuf/python-protobuf.hash b/package/python-protobuf/python-protobuf.hash index b0662124a9..a12c199663 100644 --- a/package/python-protobuf/python-protobuf.hash +++ b/package/python-protobuf/python-protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a014a0108e18c06a0c0308d92cdcae6ee106e4b02dd2ab1ff7073c4c80153aea protobuf-python-4.21.6.tar.gz +sha256 d81ebc20030fe8d03bceb38f06aba2797c40852e5aab6819481ce808fb305fae protobuf-python-4.21.8.tar.gz sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:54:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:54:12 +0200 Subject: [Buildroot] [git commit] package/harfbuzz: bump version to 5.3.1 Message-ID: <20221025185424.741B787069@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eab2203476a9d57ef647ebaba360b50d6718d73e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..9489f25c6a 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 4a6ce097b75a8121facc4ba83b5b083bfec657f45b003cd5a3424f2ae6b4434d harfbuzz-5.3.1.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..b0112168e1 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.1 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) From buildroot at heine.tech Tue Oct 25 19:01:09 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 21:01:09 +0200 Subject: [Buildroot] [PATCH v3] package/catch2: new package Message-ID: <20221025190109.320525-1-buildroot@heine.tech> Catch2 is a modern C++ unit testing framework which is increasing in popularity. This package is staging only and allows to build tests to be run on the target. - https://github.com/catchorg/Catch2 Signed-off-by: Michael Nosthoff -- v2: - fix name in Config.in comment v3: - bump to version 3.1.1 - build as static lib as shared lib is not really supported [0] - drop host package [0] https://github.com/catchorg/Catch2/blob/devel/docs/faq.md --- DEVELOPERS | 1 + package/Config.in | 1 + package/catch2/Config.in | 28 ++++++++++++++++++++++++++++ package/catch2/catch2.hash | 3 +++ package/catch2/catch2.mk | 19 +++++++++++++++++++ 5 files changed, 52 insertions(+) create mode 100644 package/catch2/Config.in create mode 100644 package/catch2/catch2.hash create mode 100644 package/catch2/catch2.mk diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..7da9dc48c9 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2098,6 +2098,7 @@ F: package/gnuplot/ F: package/sdl2/ N: Michael Nosthoff +F: package/catch2/ F: package/grpc/ F: package/gtest/ F: package/libabseil-cpp/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..9e7a68d8e9 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1968,6 +1968,7 @@ menu "Other" source "package/boost/Config.in" source "package/c-capnproto/Config.in" source "package/capnproto/Config.in" + source "package/catch2/Config.in" source "package/cctz/Config.in" source "package/cereal/Config.in" source "package/clang/Config.in" diff --git a/package/catch2/Config.in b/package/catch2/Config.in new file mode 100644 index 0000000000..2f53d197b2 --- /dev/null +++ b/package/catch2/Config.in @@ -0,0 +1,28 @@ +config BR2_PACKAGE_CATCH2 + bool "catch2" + depends on BR2_USE_WCHAR + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # C++14 + depends on BR2_USE_MMU # fork() + help + Catch2 is mainly a unit testing framework for C++, but it + also provides basic micro-benchmarking features, and simple + BDD macros. + + Catch2's main advantage is that using it is both simple and + natural. Tests autoregister themselves and do not have to + be named with valid identifiers, assertions look like + normal C++ code, and sections provide a nice way to share + set-up and tear-down code in tests. + + This package allows running testsuites on the target which + might be advantageous in certain cases. + + https://github.com/catchorg/Catch2 + +comment "catch2 needs a toolchain w/ C++, wchar, threads, gcc >= 4.9" + depends on BR2_USE_MMU + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 diff --git a/package/catch2/catch2.hash b/package/catch2/catch2.hash new file mode 100644 index 0000000000..76f6aea150 --- /dev/null +++ b/package/catch2/catch2.hash @@ -0,0 +1,3 @@ +# Locally computed: +sha256 2106bccfec18c8ce673623d56780220e38527dd8f283ccba26aa4b8758737d0e v3.1.1.tar.gz +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE.txt diff --git a/package/catch2/catch2.mk b/package/catch2/catch2.mk new file mode 100644 index 0000000000..b38f88e4da --- /dev/null +++ b/package/catch2/catch2.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# catch2 +# +################################################################################ + +CATCH2_VERSION = 3.1.1 +CATCH2_SOURCE = v$(CATCH2_VERSION).tar.gz +CATCH2_SITE = https://github.com/catchorg/Catch2/archive +CATCH2_INSTALL_STAGING = YES +CATCH2_INSTALL_TARGET = NO +CATCH2_LICENSE = BSL-1.0 +CATCH2_LICENSE_FILES = LICENSE.txt +CATCH2_SUPPORTS_IN_SOURCE_BUILD = NO + +CATCH2_CONF_OPTS = -DCATCH_INSTALL_DOCS=OFF \ + -DBUILD_SHARED_LIBS=OFF + +$(eval $(cmake-package)) -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 19:02:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 13:02:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/nodejs: bypass configure shell wrapper Message-ID: <20221025190236.1190494-1-james.hilliard1@gmail.com> The configure file is a shell script which searches for a predefined python binary and then calls configure.py with that. As we already call configure with the desired python binary we should call configure.py directly so that the expected python binary is used and so that the shell wrapper doesn't throw spurious interpreter validation errors. This also avoid spurious errors due to the configure shell wrapper missing supported python versions, for example this fixes: Node.js configure: Found Python 3.11.0... Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. /usr/bin/python3.10 ./configure Signed-off-by: James Hilliard --- package/nodejs/nodejs.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 05456e3443..29a10b900f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -88,7 +88,7 @@ define HOST_NODEJS_CONFIGURE_CMDS $(HOST_CONFIGURE_OPTS) \ PATH=$(@D)/bin:$(BR_PATH) \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=$(HOST_DIR) \ --without-dtrace \ --without-etw \ @@ -200,7 +200,7 @@ define NODEJS_CONFIGURE_CMDS LDFLAGS="$(NODEJS_LDFLAGS)" \ LD="$(TARGET_CXX)" \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=/usr \ --dest-cpu=$(NODEJS_CPU) \ $(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \ -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 19:22:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 13:22:19 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-cchardet: fix python 3.11 compatibility Message-ID: <20221025192219.1296974-1-james.hilliard1@gmail.com> Add host-python-cython so that cython will generate python 3.11 compatible sources instead of using the python 3.11 incompatible pre-built sources. Signed-off-by: James Hilliard --- package/python-cchardet/python-cchardet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/python-cchardet/python-cchardet.mk b/package/python-cchardet/python-cchardet.mk index 396e9d6c53..53a17f6732 100644 --- a/package/python-cchardet/python-cchardet.mk +++ b/package/python-cchardet/python-cchardet.mk @@ -10,5 +10,6 @@ PYTHON_CCHARDET_SITE = https://files.pythonhosted.org/packages/a8/5d/090c9f0312b PYTHON_CCHARDET_SETUP_TYPE = setuptools PYTHON_CCHARDET_LICENSE = MPL-1.1 PYTHON_CCHARDET_LICENSE_FILES = COPYING +PYTHON_CCHARDET_DEPENDENCIES = host-python-cython $(eval $(python-package)) -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 20:06:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:06:02 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.1 In-Reply-To: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> References: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> Message-ID: <20221025220602.154d1807@windsurf> On Thu, 20 Oct 2022 19:40:31 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From bugzilla at busybox.net Tue Oct 25 20:13:21 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:13:21 +0000 Subject: [Buildroot] [Bug 15006] toolchain Arm AArch64 toolchain 11.2-2022.02 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15006 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #2 from Thomas Petazzoni --- Fixed by https://gitlab.com/buildroot.org/buildroot/-/commit/ab828e25fb3ea640cfa7e85a5dd765db208db80a. -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Tue Oct 25 20:13:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:13:59 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict Message-ID: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> This commit backports the patch "fixinc: don't "fix" machine names in __has_include(...)" from upstream GCC, which is needed to resolve a header conflict between glibc headers and kernel headers, which has appeared since we bumped glibc to version 2.36 in commit 80c8c15c8534a24382b900a07082a289a368f736. The problem comes from the "fixinc" logic used by gcc to fixup some headers files, generated inside an include-fixed/ folder. This logic ended up replacing "linux/mount.h" by "__linux__/mount.h" in __has_include() invocation, like this: #ifdef __has_include # if __has_include ("__linux__/mount.h") # include "linux/mount.h" # endif #endif in build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With this fix in place, this "include-fixed" header is no longer generated, avoiding the problem. This issue was visible in two different ways in glibc configurations: - As a build failure during the gcc build itself, for architectures that support libsanitizer, as libsanitizer includes mount.h, and would therefore encounter the header conflict. - As a build failure during another user-space package (such as sysvinit for example), on architectures when libsanitizer isn't used, and therefore for which the gcc build was successful, but the header conflict shows up when building some "random" user-space package. The problem is already fixed in GCC 12.2.0, so no patch is required. The problem did not exist back in GCC 8.4.0, so this version does not need patching. Consequently, the patch is only needed for GCC 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. Fixes: (gcc build issue, on architecture that supports libsanitizer) http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ (sysvinit build issue, on architecture that does not support libsanitizer) http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ (crun) http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ (libarchive) http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. Fixes: https://bugs.busybox.net/show_bug.cgi?id=15021 Signed-off-by: Thomas Petazzoni --- ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ 3 files changed, 372 insertions(+) create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8614537794 --- /dev/null +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..4e93f6ab96 --- /dev/null +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 5b23a8b640d..404b420f302 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index 066bef99162..b7ad6982e96 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3154,7 +3154,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8b6be49e68 --- /dev/null +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + -- 2.37.3 From bugzilla at busybox.net Tue Oct 25 20:20:44 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:20:44 +0000 Subject: [Buildroot] [Bug 14936] nodejs does not build In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14936 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Status|NEW |RESOLVED --- Comment #5 from Thomas Petazzoni --- This has been fixed in commit https://gitlab.com/buildroot.org/buildroot/-/commit/5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7. -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Tue Oct 25 20:22:57 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:22:57 +0000 Subject: [Buildroot] [Bug 14916] build buildroot with glibc and linux kernel 5.4, start with qemu will cause error: "FATAL: kernel too old" In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14916 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |NEEDINFO Status|NEW |RESOLVED --- Comment #5 from Thomas Petazzoni --- No feedback from the contributor, insufficient information to reproduce, so closing the bug. -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Tue Oct 25 20:38:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:38:57 +0200 Subject: [Buildroot] [git commit] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 Message-ID: <20221025205532.41CFC87076@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=196cbd98010ae0145cfe555fa835e761b40b23fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls Signed-off-by: Thomas Petazzoni --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...-import-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...n-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...n-option-to-disable-optional-neon-suppor.patch} | 0 ...d_xor-Include-stddef.h-to-fix-build-erro.patch} | 0 ...ibc-build.patch => 0004-Fix-uClibc-build.patch} | 0 ...tex.h-fix-build-on-32-bit-architectures-u.patch | 43 ------- ...til-remove-needless-c99-compat-h-includes.patch | 126 --------------------- .../mesa3d/0007-include-drop-c11-compat-h.patch | 100 ---------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..3712c79db0 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.2 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..f10f8fe112 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html +sha256 2de11fb74fc5cc671b818e49fe203cea0cd1d8b69756e97cdb06a2f4e78948f9 mesa-22.2.2.tar.xz +sha512 a1eb67e1ae4880c79b1fdc570f4389baba0b8ba796da7e695c9af19a7d92b6c06b95570e6c796548b61355989025fb7efbf9acac74cbd695f7e297dc913b933c mesa-22.2.2.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index daefd6f6d5..bac071ecb3 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.2 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos From thomas.petazzoni at bootlin.com Tue Oct 25 20:55:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:55:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 In-Reply-To: <20221020185459.28407-1-bernd.kuhls@t-online.de> References: <20221020185459.28407-1-bernd.kuhls@t-online.de> Message-ID: <20221025225533.3aa6c869@windsurf> On Thu, 20 Oct 2022 20:54:59 +0200 Bernd Kuhls wrote: > Release notes: > https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html > https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html > https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html > https://www.phoronix.com/news/Mesa-22.2-Released > > Removed patches included in upstream release, renumbered remaining > patches. > > Signed-off-by: Bernd Kuhls > --- > package/mesa3d-headers/mesa3d-headers.mk | 2 +- > ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- > ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 > ...ion-to-disable-optional-neon-suppor.patch} | 0 > ...-Include-stddef.h-to-fix-build-erro.patch} | 0 > ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 > ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ > ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ > .../0007-include-drop-c11-compat-h.patch | 100 -------------- > package/mesa3d/mesa3d.hash | 8 +- > package/mesa3d/mesa3d.mk | 2 +- > 11 files changed, 6 insertions(+), 305 deletions(-) > delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch > rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) > rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) > rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) > rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) > delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch > delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch > delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/nodejs: bypass configure shell wrapper In-Reply-To: <20221025190236.1190494-1-james.hilliard1@gmail.com> References: <20221025190236.1190494-1-james.hilliard1@gmail.com> Message-ID: <20221025225705.31a1975c@windsurf> On Tue, 25 Oct 2022 13:02:36 -0600 James Hilliard wrote: > The configure file is a shell script which searches for a predefined > python binary and then calls configure.py with that. > > As we already call configure with the desired python binary we should > call configure.py directly so that the expected python binary is used > and so that the shell wrapper doesn't throw spurious interpreter > validation errors. > > This also avoid spurious errors due to the configure shell wrapper > missing supported python versions, for example this fixes: > Node.js configure: Found Python 3.11.0... > Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. > /usr/bin/python3.10 ./configure > > Signed-off-by: James Hilliard > --- > package/nodejs/nodejs.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:30 +0200 Subject: [Buildroot] [git commit] package/python-cchardet: fix python 3.11 compatibility Message-ID: <20221025205740.9280587086@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6833dd5079b8017bde37b7d3ef201d35450a12e6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add host-python-cython so that cython will generate python 3.11 compatible sources instead of using the python 3.11 incompatible pre-built sources. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-cchardet/python-cchardet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/python-cchardet/python-cchardet.mk b/package/python-cchardet/python-cchardet.mk index 396e9d6c53..53a17f6732 100644 --- a/package/python-cchardet/python-cchardet.mk +++ b/package/python-cchardet/python-cchardet.mk @@ -10,5 +10,6 @@ PYTHON_CCHARDET_SITE = https://files.pythonhosted.org/packages/a8/5d/090c9f0312b PYTHON_CCHARDET_SETUP_TYPE = setuptools PYTHON_CCHARDET_LICENSE = MPL-1.1 PYTHON_CCHARDET_LICENSE_FILES = COPYING +PYTHON_CCHARDET_DEPENDENCIES = host-python-cython $(eval $(python-package)) From thomas.petazzoni at bootlin.com Tue Oct 25 20:56:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:56:58 +0200 Subject: [Buildroot] [git commit] package/nodejs: bypass configure shell wrapper Message-ID: <20221025205740.8758D87084@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f073cf7547e6bef74768aee1aef67f3b28bee8c0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The configure file is a shell script which searches for a predefined python binary and then calls configure.py with that. As we already call configure with the desired python binary we should call configure.py directly so that the expected python binary is used and so that the shell wrapper doesn't throw spurious interpreter validation errors. This also avoid spurious errors due to the configure shell wrapper missing supported python versions, for example this fixes: Node.js configure: Found Python 3.11.0... Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. /usr/bin/python3.10 ./configure Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/nodejs/nodejs.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 05456e3443..29a10b900f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -88,7 +88,7 @@ define HOST_NODEJS_CONFIGURE_CMDS $(HOST_CONFIGURE_OPTS) \ PATH=$(@D)/bin:$(BR_PATH) \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=$(HOST_DIR) \ --without-dtrace \ --without-etw \ @@ -200,7 +200,7 @@ define NODEJS_CONFIGURE_CMDS LDFLAGS="$(NODEJS_LDFLAGS)" \ LD="$(TARGET_CXX)" \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=/usr \ --dest-cpu=$(NODEJS_CPU) \ $(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \ From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-cchardet: fix python 3.11 compatibility In-Reply-To: <20221025192219.1296974-1-james.hilliard1@gmail.com> References: <20221025192219.1296974-1-james.hilliard1@gmail.com> Message-ID: <20221025225742.52be95f2@windsurf> On Tue, 25 Oct 2022 13:22:19 -0600 James Hilliard wrote: > Add host-python-cython so that cython will generate python 3.11 > compatible sources instead of using the python 3.11 incompatible > pre-built sources. > > Signed-off-by: James Hilliard > --- > package/python-cchardet/python-cchardet.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:39 +0200 Subject: [Buildroot] [PATCH] package/grpc: bump to version 1.50.0 In-Reply-To: <20221025182419.250668-1-buildroot@heine.tech> References: <20221025182419.250668-1-buildroot@heine.tech> Message-ID: <20221025225839.713862d5@windsurf> On Tue, 25 Oct 2022 20:24:11 +0200 Michael Nosthoff via buildroot wrote: > drop cross-compile patch which is now upstream (again). > > Signed-off-by: Michael Nosthoff > --- > ...conditionally-downloading-api-repos.patch} | 0 > .../0004-fix-grpc-plugin-cross-compile.patch | 43 ------------------- > package/grpc/grpc.hash | 2 +- > package/grpc/grpc.mk | 2 +- > 4 files changed, 2 insertions(+), 45 deletions(-) > rename package/grpc/{0005-disable-unconditionally-downloading-api-repos.patch => 0004-disable-unconditionally-downloading-api-repos.patch} (100%) > delete mode 100644 package/grpc/0004-fix-grpc-plugin-cross-compile.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:00 +0200 Subject: [Buildroot] [git commit] package/grpc: bump to version 1.50.0 Message-ID: <20221025205852.AC28487093@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9f5a9926f089bf0c7943049751fefa6035ce469 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master drop cross-compile patch which is now upstream (again). Signed-off-by: Michael Nosthoff Signed-off-by: Thomas Petazzoni --- ...le-unconditionally-downloading-api-repos.patch} | 0 .../grpc/0004-fix-grpc-plugin-cross-compile.patch | 43 ---------------------- package/grpc/grpc.hash | 2 +- package/grpc/grpc.mk | 2 +- 4 files changed, 2 insertions(+), 45 deletions(-) diff --git a/package/grpc/0005-disable-unconditionally-downloading-api-repos.patch b/package/grpc/0004-disable-unconditionally-downloading-api-repos.patch similarity index 100% rename from package/grpc/0005-disable-unconditionally-downloading-api-repos.patch rename to package/grpc/0004-disable-unconditionally-downloading-api-repos.patch diff --git a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch b/package/grpc/0004-fix-grpc-plugin-cross-compile.patch deleted file mode 100644 index d4e18a7853..0000000000 --- a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 6798193f062676fddf7fee6d0c928f8ce6d92894 Mon Sep 17 00:00:00 2001 -From: Michael Nosthoff -Date: Thu, 21 Jul 2022 22:14:32 +0200 -Subject: [PATCH] cmake: fix cross-compilation with - gRPC_BUILD_GRPC_CPP_PLUGIN=OFF - -commit 99752b173cfa reintroduced the cross-compilation issue which was fixed by da10b795e177 - -upstream PR: https://github.com/grpc/grpc/pull/30378 - -Signed-off-by: Michael Nosthoff - ---- - CMakeLists.txt | 2 +- - templates/CMakeLists.txt.template | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 9cad96a12f95..11e7ae2b67df 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -514,7 +514,7 @@ function(protobuf_generate_grpc_cpp_with_import_path_correction FILE_LOCATION IM - --plugin=protoc-gen-grpc=${_gRPC_CPP_PLUGIN} - ${_protobuf_include_path} - ${REL_FIL} -- DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} ${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY ${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for ${IMPORT_PATH}" - VERBATIM) -diff --git a/templates/CMakeLists.txt.template b/templates/CMakeLists.txt.template -index 161cf46798f1..82fe4217913a 100644 ---- a/templates/CMakeLists.txt.template -+++ b/templates/CMakeLists.txt.template -@@ -498,7 +498,7 @@ - --plugin=protoc-gen-grpc=<%text>${_gRPC_CPP_PLUGIN} - <%text>${_protobuf_include_path} - <%text>${REL_FIL} -- DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} <%text>${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY <%text>${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for <%text>${IMPORT_PATH}" - VERBATIM) diff --git a/package/grpc/grpc.hash b/package/grpc/grpc.hash index 9ef976a60a..4d838703cc 100644 --- a/package/grpc/grpc.hash +++ b/package/grpc/grpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 5071b630e2a14707ad060636990f1b25b0984bd168c7ea1ab95e48a3bdc0081f grpc-1.49.1.tar.gz +sha256 76900ab068da86378395a8e125b5cc43dfae671e09ff6462ddfef18676e2165a grpc-1.50.0.tar.gz sha256 590198e3f305f2c347fde64d637c65492bbef554db6c8364e149cd375e3797ee LICENSE diff --git a/package/grpc/grpc.mk b/package/grpc/grpc.mk index 5f28e86113..9aac241e47 100644 --- a/package/grpc/grpc.mk +++ b/package/grpc/grpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRPC_VERSION = 1.49.1 +GRPC_VERSION = 1.50.0 GRPC_SITE = $(call github,grpc,grpc,v$(GRPC_VERSION)) GRPC_LICENSE = Apache-2.0, BSD-3-Clause (third_party code), MPL-2.0 (etc/roots.pem) GRPC_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:28 +0200 Subject: [Buildroot] [git commit] package/{python-}protobuf: bump to version 21.8 Message-ID: <20221025205852.B5DB687094@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13a8417f0de1649ebb51fcd2e02862310b7b3d43 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Nosthoff Signed-off-by: Thomas Petazzoni --- package/protobuf/protobuf.hash | 2 +- package/protobuf/protobuf.mk | 2 +- package/python-protobuf/python-protobuf.hash | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/protobuf/protobuf.hash b/package/protobuf/protobuf.hash index 03138a59e7..24dbc0f1a1 100644 --- a/package/protobuf/protobuf.hash +++ b/package/protobuf/protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -sha256 a3c4c104b98a21a577ce5ecc0d9b9f43a359b917d0bcf69467b70dc27416dfdc protobuf-cpp-3.21.6.tar.gz +sha256 f6251f2d00aad41b34c1dfa3d752713cb1bb1b7020108168a4deaa206ba8ed42 protobuf-cpp-3.21.8.tar.gz diff --git a/package/protobuf/protobuf.mk b/package/protobuf/protobuf.mk index fbc495c438..88f359f24c 100644 --- a/package/protobuf/protobuf.mk +++ b/package/protobuf/protobuf.mk @@ -7,7 +7,7 @@ # When bumping this package, make sure to also verify if the # python-protobuf package still works and to update its hash, # as they share the same version/site variables. -PROTOBUF_VERSION = 21.6 +PROTOBUF_VERSION = 21.8 PROTOBUF_SOURCE = protobuf-cpp-3.$(PROTOBUF_VERSION).tar.gz PROTOBUF_SITE = https://github.com/protocolbuffers/protobuf/releases/download/v$(PROTOBUF_VERSION) PROTOBUF_LICENSE = BSD-3-Clause diff --git a/package/python-protobuf/python-protobuf.hash b/package/python-protobuf/python-protobuf.hash index b0662124a9..a12c199663 100644 --- a/package/python-protobuf/python-protobuf.hash +++ b/package/python-protobuf/python-protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a014a0108e18c06a0c0308d92cdcae6ee106e4b02dd2ab1ff7073c4c80153aea protobuf-python-4.21.6.tar.gz +sha256 d81ebc20030fe8d03bceb38f06aba2797c40852e5aab6819481ce808fb305fae protobuf-python-4.21.8.tar.gz sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:55 +0200 Subject: [Buildroot] [PATCH] package/{python-}protobuf: bump to version 21.8 In-Reply-To: <20221025185040.317759-1-buildroot@heine.tech> References: <20221025185040.317759-1-buildroot@heine.tech> Message-ID: <20221025225855.3cdfc398@windsurf> On Tue, 25 Oct 2022 20:50:39 +0200 Michael Nosthoff via buildroot wrote: > Signed-off-by: Michael Nosthoff > --- > package/protobuf/protobuf.hash | 2 +- > package/protobuf/protobuf.mk | 2 +- > package/python-protobuf/python-protobuf.hash | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221025142929.3089316-1-james.hilliard1@gmail.com> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> Message-ID: <20221025225930.051d1f9b@windsurf> On Tue, 25 Oct 2022 08:29:29 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/kmod/kmod.hash | 2 +- > package/kmod/kmod.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: add new host-pkgconf dependency In-Reply-To: <20221025150048.3640674-1-james.hilliard1@gmail.com> References: <20221025150048.3640674-1-james.hilliard1@gmail.com> Message-ID: <20221025225951.5efe7b3e@windsurf> On Tue, 25 Oct 2022 09:00:48 -0600 James Hilliard wrote: > After updating to version 0.17 we need host-pkgconf. > > Fixes: > - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 > > Signed-off-by: James Hilliard > --- > package/libpciaccess/libpciaccess.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:43 +0200 Subject: [Buildroot] [git commit] package/libpciaccess: add new host-pkgconf dependency Message-ID: <20221025210022.C1DFF870A7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17065693f23996097d46e350b40c46795b7ffeac branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master After updating to version 0.17 we need host-pkgconf. Fixes: - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/libpciaccess/libpciaccess.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index 68d46b7f50..525a3bcd02 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -10,6 +10,7 @@ LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING LIBPCIACCESS_INSTALL_STAGING = YES +LIBPCIACCESS_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_ZLIB),y) LIBPCIACCESS_CONF_OPTS += --with-zlib From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:15 +0200 Subject: [Buildroot] [git commit] package/kmod: bump to version 30 Message-ID: <20221025210022.B761B870A6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0861fed2f0ede61f45c7279028f7341519343913 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/kmod/kmod.hash | 2 +- package/kmod/kmod.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmod/kmod.hash b/package/kmod/kmod.hash index c68e41f1b6..b181f73e9b 100644 --- a/package/kmod/kmod.hash +++ b/package/kmod/kmod.hash @@ -1,5 +1,5 @@ # From https://www.kernel.org/pub/linux/utils/kernel/kmod/sha256sums.asc -sha256 0b80eea7aa184ac6fd20cafa2a1fdf290ffecc70869a797079e2cc5c6225a52a kmod-29.tar.xz +sha256 f897dd72698dc6ac1ef03255cd0a5734ad932318e4adbaebc7338ef2f5202f9f kmod-30.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 libkmod/COPYING diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..5d6d4408f9 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -4,7 +4,7 @@ # ################################################################################ -KMOD_VERSION = 29 +KMOD_VERSION = 30 KMOD_SOURCE = kmod-$(KMOD_VERSION).tar.xz KMOD_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/kmod KMOD_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:00:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:00:14 +0200 Subject: [Buildroot] [git commit] package/zbar: fix python 3.11 compatibility Message-ID: <20221025210022.CEB28870A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e3f25de3e81341de041879fb3dd458d8484c9d61 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch from upstream pull request to fix build with python 3.11. Fixes: python/enum.c: In function ???enumitem_new???: python/enum.c:55:25: error: lvalue required as left operand of assignment 55 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ python/enum.c: In function ???zbarEnumItem_New???: python/enum.c:146:25: error: lvalue required as left operand of assignment 146 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- ...001-python-enum-fix-build-for-Python-3.11.patch | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch new file mode 100644 index 0000000000..f525b62184 --- /dev/null +++ b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch @@ -0,0 +1,62 @@ +From fbaec4b4e6fe735efe6916fe5b92805a0d96bf8a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?= + +Date: Wed, 21 Sep 2022 10:32:11 +0700 +Subject: [PATCH] python: enum: fix build for Python 3.11 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Python 3.9 introduced Py_SET_SIZE function to set size instead of +relying on Py_SIZE() as a macro [3.9]. + +Python 3.10 started to encourage to use Py_SET_SIZE instead of +assigning into return value of Py_SIZE [3.10]. + +Python 3.11 flips the switch, turn Py_SIZE into a function [3.11], +thus Py_SIZE(obj) will be a rvalue. We need to use Py_SET_SIZE +to set size now. + +[3.9]: https://docs.python.org/3.9/c-api/structures.html#c.Py_SET_SIZE +[3.10]: https://docs.python.org/3.10/c-api/structures.html#c.Py_SIZE +[3.11]: https://docs.python.org/3.11/c-api/structures.html#c.Py_SIZE + +Signed-off-by: ??o??n Tr???n C??ng Danh +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/mchehab/zbar/pull/231] +--- + python/enum.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/python/enum.c b/python/enum.c +index dfe1b1e..946344f 100644 +--- a/python/enum.c ++++ b/python/enum.c +@@ -52,7 +52,11 @@ enumitem_new (PyTypeObject *type, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + #else +@@ -143,7 +147,11 @@ zbarEnumItem_New (PyObject *byname, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + +-- +2.34.1 + From thomas.petazzoni at bootlin.com Tue Oct 25 21:00:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:00:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/zbar: fix python 3.11 compatibility In-Reply-To: <20221025180603.886122-1-james.hilliard1@gmail.com> References: <20221025180603.886122-1-james.hilliard1@gmail.com> Message-ID: <20221025230024.3ab84f31@windsurf> On Tue, 25 Oct 2022 12:06:03 -0600 James Hilliard wrote: > Add a patch from upstream pull request to fix build with python 3.11. > > Fixes: > python/enum.c: In function ?enumitem_new?: > python/enum.c:55:25: error: lvalue required as left operand of assignment > 55 | Py_SIZE(&self->val) = Py_SIZE(longval); > | ^ > python/enum.c: In function ?zbarEnumItem_New?: > python/enum.c:146:25: error: lvalue required as left operand of assignment > 146 | Py_SIZE(&self->val) = Py_SIZE(longval); > | ^ > > Signed-off-by: James Hilliard > --- > ...ython-enum-fix-build-for-Python-3.11.patch | 62 +++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:13 +0200 Subject: [Buildroot] [git commit] boot/grub2: ignore CVE-2021-46705 Message-ID: <20221025210622.2E380870B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=259314f016b0cd7cabfdcce88a5c11f1da5edd05 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This CVE is specific to the SUSE distribution. See https://security-tracker.debian.org/tracker/CVE-2021-46705. Signed-off-by: Thomas Petazzoni --- boot/grub2/grub2.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/boot/grub2/grub2.mk b/boot/grub2/grub2.mk index f04be05227..875884cf5c 100644 --- a/boot/grub2/grub2.mk +++ b/boot/grub2/grub2.mk @@ -32,6 +32,8 @@ GRUB2_IGNORE_CVES += CVE-2019-14865 GRUB2_IGNORE_CVES += CVE-2020-15705 # 0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch GRUB2_IGNORE_CVES += CVE-2021-3981 +# vulnerability is specific to the SUSE distribution +GRUB2_IGNORE_CVES += CVE-2021-46705 ifeq ($(BR2_TARGET_GRUB2_INSTALL_TOOLS),y) GRUB2_INSTALL_TARGET = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:09 +0200 Subject: [Buildroot] [git commit] boot/grub2: add patch to fix CVE-2021-3981 Message-ID: <20221025210622.267E3870B1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51b04fc02c8ec204b13cbf1f854328c7ca276a20 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This commit backports an upstream commit that fixes CVE-2021-3981. Signed-off-by: Thomas Petazzoni --- ...b-mkconfig-Restore-umask-for-the-grub.cfg.patch | 43 ++++++++++++++++++++++ boot/grub2/grub2.mk | 2 + 2 files changed, 45 insertions(+) diff --git a/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch b/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch new file mode 100644 index 0000000000..0d6a1a6e01 --- /dev/null +++ b/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch @@ -0,0 +1,43 @@ +From 8418defaf0902bdd8af188221ae54c5a3d6ad05d Mon Sep 17 00:00:00 2001 +From: Michael Chang +Date: Fri, 3 Dec 2021 16:13:28 +0800 +Subject: [PATCH] grub-mkconfig: Restore umask for the grub.cfg + +The commit ab2e53c8a (grub-mkconfig: Honor a symlink when generating +configuration by grub-mkconfig) has inadvertently discarded umask for +creating grub.cfg in the process of running grub-mkconfig. The resulting +wrong permission (0644) would allow unprivileged users to read GRUB +configuration file content. This presents a low confidentiality risk +as grub.cfg may contain non-secured plain-text passwords. + +This patch restores the missing umask and sets the creation file mode +to 0600 preventing unprivileged access. + +Fixes: CVE-2021-3981 + +Signed-off-by: Michael Chang +Reviewed-by: Daniel Kiper +[Upstream: https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commit;h=0adec29674561034771c13e446069b41ef41e4d4] +Signed-off-by: Thomas Petazzoni +--- + util/grub-mkconfig.in | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/util/grub-mkconfig.in b/util/grub-mkconfig.in +index f8cbb8d7a..84f356ea4 100644 +--- a/util/grub-mkconfig.in ++++ b/util/grub-mkconfig.in +@@ -300,7 +300,10 @@ and /etc/grub.d/* files or please file a bug report with + exit 1 + else + # none of the children aborted with error, install the new grub.cfg ++ oldumask=$(umask) ++ umask 077 + cat ${grub_cfg}.new > ${grub_cfg} ++ umask $oldumask + rm -f ${grub_cfg}.new + fi + fi +-- +2.37.2 + diff --git a/boot/grub2/grub2.mk b/boot/grub2/grub2.mk index 4e7e0fa898..f04be05227 100644 --- a/boot/grub2/grub2.mk +++ b/boot/grub2/grub2.mk @@ -30,6 +30,8 @@ GRUB2_IGNORE_CVES += CVE-2019-14865 # grub_linuxefi_secure_validate() is not implemented in the grub2 # version available in Buildroot. GRUB2_IGNORE_CVES += CVE-2020-15705 +# 0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch +GRUB2_IGNORE_CVES += CVE-2021-3981 ifeq ($(BR2_TARGET_GRUB2_INSTALL_TOOLS),y) GRUB2_INSTALL_TARGET = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:38 +0200 Subject: [Buildroot] [PATCH 1/2] boot/grub2: add patch to fix CVE-2021-3981 In-Reply-To: <20220920212921.732287-1-thomas.petazzoni@bootlin.com> References: <20220920212921.732287-1-thomas.petazzoni@bootlin.com> Message-ID: <20221025230638.715c53e5@windsurf> On Tue, 20 Sep 2022 23:29:19 +0200 Thomas Petazzoni wrote: > This commit backports an upstream commit that fixes CVE-2021-3981. > > Signed-off-by: Thomas Petazzoni > --- > ...onfig-Restore-umask-for-the-grub.cfg.patch | 43 +++++++++++++++++++ > boot/grub2/grub2.mk | 2 + > 2 files changed, 45 insertions(+) > create mode 100644 boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 21:07:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:07:57 +0200 Subject: [Buildroot] [git commit] package/gdb: enable host-gdb and gdbserver support for or1k with gdb 12.1 Message-ID: <20221025211117.573CF870B9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=382d33dfa64202a79968ff54d729fb37479cbd65 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The gdbserver support for or1k is available since 12.1 release, since commit [1]. Restrict the gdb version choice for or1k to 12.1 for simplicity. Also enable host-gdb to connect to the gdbserver on the target. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4 Signed-off-by: Romain Naour Cc: Stafford Horne Signed-off-by: Thomas Petazzoni --- package/gdb/Config.in | 3 --- package/gdb/Config.in.host | 9 ++++++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/gdb/Config.in b/package/gdb/Config.in index 1cad3c4fd8..273b3072ae 100644 --- a/package/gdb/Config.in +++ b/package/gdb/Config.in @@ -17,8 +17,6 @@ config BR2_PACKAGE_GDB depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 depends on BR2_INSTALL_LIBSTDCPP - # no gdbserver on or1k - select BR2_PACKAGE_GDB_DEBUGGER if BR2_or1k # When the external toolchain gdbserver is copied to the # target, we don't allow building a separate gdbserver. The # one from the external toolchain should be used. @@ -45,7 +43,6 @@ if BR2_PACKAGE_GDB config BR2_PACKAGE_GDB_SERVER bool "gdbserver" depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY - depends on !BR2_or1k help Build the gdbserver stub to run on the target. A full gdb is needed to debug the progam. diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host index 3b8d456f1c..e8a34e0834 100644 --- a/package/gdb/Config.in.host +++ b/package/gdb/Config.in.host @@ -3,7 +3,6 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS default y depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT) depends on !BR2_microblaze - depends on !BR2_or1k comment "Host GDB Options" depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY @@ -49,9 +48,13 @@ choice config BR2_GDB_VERSION_10 bool "gdb 10.x" + # gdbserver support missing + depends on !BR2_or1k config BR2_GDB_VERSION_11 bool "gdb 11.x" + # gdbserver support missing + depends on !BR2_or1k config BR2_GDB_VERSION_12 bool "gdb 12.x" @@ -65,6 +68,6 @@ config BR2_GDB_VERSION string default "arc-2020.09-release-gdb" if BR2_arc default "10.2" if BR2_GDB_VERSION_10 - default "11.2" if BR2_GDB_VERSION_11 || !BR2_PACKAGE_HOST_GDB - default "12.1" if BR2_GDB_VERSION_12 + default "11.2" if BR2_GDB_VERSION_11 || (!BR2_PACKAGE_HOST_GDB && !BR2_or1k) + default "12.1" if BR2_GDB_VERSION_12 || (!BR2_PACKAGE_HOST_GDB && BR2_or1k) depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB From thomas.petazzoni at bootlin.com Tue Oct 25 21:11:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:11:22 +0200 Subject: [Buildroot] [PATCH] package/gdb: gdb 12.1: enable host-gdb and gdbserver support for or1k In-Reply-To: <20220921143328.186633-1-romain.naour@gmail.com> References: <20220921143328.186633-1-romain.naour@gmail.com> Message-ID: <20221025231122.40aa1f4c@windsurf> On Wed, 21 Sep 2022 16:33:28 +0200 Romain Naour wrote: > The gdbserver support for or1k is available since 12.1 release, since > commit [1]. Restrict the gdb version choice for or1k to 12.1 for > simplicity. Also enable host-gdb to connect to the gdbserver on the > target. > > [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4 > > Signed-off-by: Romain Naour > Cc: Stafford Horne > --- > package/gdb/Config.in | 3 --- > package/gdb/Config.in.host | 9 ++++++--- > 2 files changed, 6 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Tue Oct 25 22:13:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:13:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: fix build without C++ Message-ID: <20221025221308.352026-1-fontaine.fabrice@gmail.com> Fix the following build failure without C++ raised since bump to version 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): The C++ compiler "/usr/bin/clang++" is not able to compile a simple test program. Fixes: - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 Signed-off-by: Fabrice Fontaine --- package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 package/libcodec2/0001-update-cmake.patch diff --git a/package/libcodec2/0001-update-cmake.patch b/package/libcodec2/0001-update-cmake.patch new file mode 100644 index 0000000000..e983800e27 --- /dev/null +++ b/package/libcodec2/0001-update-cmake.patch @@ -0,0 +1,301 @@ +From 812d69af486e608a10380ed5817b03d08c6e786a Mon Sep 17 00:00:00 2001 +From: "A. Maitland Bottoms" +Date: Sun, 17 Jul 2022 17:04:44 -0400 +Subject: [PATCH] update cmake + +Some minor refactoring of Codec2 build to better use CMake +features to improve readability ans maintainability. + +[Retrieved from: +https://github.com/drowe67/codec2/commit/812d69af486e608a10380ed5817b03d08c6e786a] +Signed-off-by: Fabrice Fontaine +--- + CMakeLists.txt | 48 +++++--------------------- + src/CMakeLists.txt | 84 ++++++++++++++++++++++++---------------------- + 2 files changed, 53 insertions(+), 79 deletions(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 54ac1f4f4..998af5ddf 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -5,19 +5,13 @@ + # Please report questions, comments, problems, or patches to the freetel + # mailing list: https://lists.sourceforge.net/lists/listinfo/freetel-codec2 + # +-set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") +- +-project(codec2) +- +-cmake_minimum_required(VERSION 3.0) +- +-# Set policies here, probably should move to cmake dir. +-if(POLICY CMP0075) +- cmake_policy(SET CMP0075 NEW) +-endif() +-if(POLICY CMP0079) +- cmake_policy(SET CMP0079 NEW) +-endif() ++cmake_minimum_required(VERSION 3.13) ++project(CODEC2 ++ VERSION 1.0.5 ++ DESCRIPTION "Next-Generation Digital Voice for Two-Way Radio" ++ HOMEPAGE_URL "https://www.rowetel.com/codec2.html" ++ LANGUAGES C ++ ) + + include(GNUInstallDirs) + mark_as_advanced(CLEAR +@@ -39,23 +33,6 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + "separate build directory and run cmake from there.") + endif("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + +-# +-# Set project version information. This should probably be done via external +-# file at some point. +-# +-set(CODEC2_VERSION_MAJOR 1) +-set(CODEC2_VERSION_MINOR 0) +-# Set to patch level if needed, otherwise leave FALSE. +-# Must be positive (non-zero) if set, since 0 == FALSE in CMake. +-set(CODEC2_VERSION_PATCH 5) +-set(CODEC2_VERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-# Patch level version bumps should not change API/ABI. +-set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-if(CODEC2_VERSION_PATCH) +- set(CODEC2_VERSION "${CODEC2_VERSION}.${CODEC2_VERSION_PATCH}") +-endif() +-message(STATUS "codec2 version: ${CODEC2_VERSION}") +- + # Set default build type + if(NOT CMAKE_BUILD_TYPE) + set(CMAKE_BUILD_TYPE "Debug") +@@ -65,6 +42,7 @@ endif() + if(BUILD_OSX_UNIVERSAL) + set(CMAKE_OSX_ARCHITECTURES "x86_64;arm64") + endif(BUILD_OSX_UNIVERSAL) ++set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") + + # + # Find the git hash if this is a working copy. +@@ -190,10 +168,6 @@ if (_GNU_SOURCE) + add_definitions(-D_GNU_SOURCE=1) + endif() + +-if(UNIX) +- set(CMAKE_REQUIRED_LIBRARIES m) +-endif() +- + check_symbol_exists(floor math.h HAVE_FLOOR) + check_symbol_exists(ceil math.h HAVE_CEIL) + check_symbol_exists(pow math.h HAVE_POW) +@@ -288,11 +262,7 @@ else() + endif() + + # Return the date (yyyy-mm-dd) +-macro(DATE RESULT) +- execute_process(COMMAND "date" "+%Y%m%d" OUTPUT_VARIABLE ${RESULT}) +-endmacro() +-DATE(DATE_RESULT) +-string(REGEX REPLACE "\n$" "" DATE_RESULT "${DATE_RESULT}") ++string(TIMESTAMP DATE_RESULT "%Y-%m-%d" UTC) + message(STATUS "Compilation date = XX${DATE_RESULT}XX") + + set(CPACK_PACKAGE_VERSION_PATCH "${CPACK_PACKAGE_VERSION_PATCH}-${DATE_RESULT}-${FREEDV_HASH}") +diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt +index 642404962..cb0990bc2 100644 +--- a/src/CMakeLists.txt ++++ b/src/CMakeLists.txt +@@ -81,7 +81,7 @@ else(CMAKE_CROSSCOMPILING) + # Build code generator binaries. These do not get installed. + # generate_codebook + add_executable(generate_codebook generate_codebook.c) +- target_link_libraries(generate_codebook m ${CMAKE_REQUIRED_LIBRARIES}) ++ target_link_libraries(generate_codebook m) + # Make native builds available for cross-compiling. + export(TARGETS generate_codebook + FILE ${CMAKE_BINARY_DIR}/ImportExecutables.cmake) +@@ -238,12 +238,16 @@ set(CODEC2_PUBLIC_HEADERS + # + # Setup the codec2 library + # ++# Patch level version bumps should not change API/ABI. ++set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") ++message(STATUS "codec2 version: ${CODEC2_VERSION}") + add_library(codec2 ${CODEC2_SRCS}) + if(UNIX) +- target_link_libraries(codec2 m) ++ target_link_libraries(codec2 PUBLIC m) + endif(UNIX) + if(LPCNET AND lpcnetfreedv_FOUND) +- target_link_libraries(codec2 lpcnetfreedv) ++ target_link_libraries(codec2 PRIVATE lpcnetfreedv) ++ list(APPEND CODEC2_PUBLIC_HEADERS ${CMAKE_SOURCE_DIR}/lpcnet/src/lpcnet_freedv.h) + endif() + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) + set_target_properties(codec2 PROPERTIES +@@ -269,70 +273,70 @@ export(TARGETS codec2 + ) + + add_executable(c2enc c2enc.c) +-target_link_libraries(c2enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2enc codec2) + + add_executable(c2dec c2dec.c) +-target_link_libraries(c2dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2dec codec2) + + add_executable(c2sim c2sim.c sd.c) +-target_link_libraries(c2sim ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2sim codec2) + + add_executable(fdmdv_get_test_bits fdmdv_get_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_get_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_get_test_bits m) + + add_executable(fdmdv_mod fdmdv_mod.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_mod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_mod m) + + add_executable(fdmdv_demod fdmdv_demod.c fdmdv.c kiss_fft.c octave.c modem_stats.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_demod m) + + add_executable(fdmdv_put_test_bits fdmdv_put_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_put_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_put_test_bits m) + + add_executable(fdmdv_channel fdmdv_channel.c) +-target_link_libraries(fdmdv_channel ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fdmdv_channel codec2) + + add_executable(insert_errors insert_errors.c) +-target_link_libraries(insert_errors ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(insert_errors) + + add_executable(freedv_tx freedv_tx.c) +-target_link_libraries(freedv_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_tx codec2) + + add_executable(freedv_rx freedv_rx.c) +-target_link_libraries(freedv_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_rx codec2) + + add_executable(freedv_data_raw_tx freedv_data_raw_tx.c) +-target_link_libraries(freedv_data_raw_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_tx codec2) + + add_executable(freedv_data_raw_rx freedv_data_raw_rx.c octave.c) +-target_link_libraries(freedv_data_raw_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_rx codec2) + + add_executable(freedv_data_tx freedv_data_tx.c) +-target_link_libraries(freedv_data_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_tx codec2) + + add_executable(freedv_data_rx freedv_data_rx.c) +-target_link_libraries(freedv_data_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_rx codec2) + + add_executable(freedv_mixed_tx freedv_mixed_tx.c) +-target_link_libraries(freedv_mixed_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_tx codec2) + + add_executable(freedv_mixed_rx freedv_mixed_rx.c) +-target_link_libraries(freedv_mixed_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_rx codec2) + + add_executable(fsk_mod fsk_mod.c) +-target_link_libraries(fsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_mod codec2) + + add_executable(fsk_mod_ext_vco fsk_mod_ext_vco.c) +-target_link_libraries(fsk_mod_ext_vco m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fsk_mod_ext_vco m) + + add_executable(fsk_demod fsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_demod codec2) + + add_executable(fsk_get_test_bits fsk_get_test_bits.c) + target_link_libraries(fsk_get_test_bits) + + add_executable(fsk_put_test_bits fsk_put_test_bits.c) +-target_link_libraries(fsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_put_test_bits codec2) + + add_executable(framer framer.c) + target_link_libraries(framer) +@@ -341,46 +345,46 @@ add_executable(deframer deframer.c) + target_link_libraries(deframer) + + add_executable(fm_demod fm_demod.c fm.c) +-target_link_libraries(fm_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fm_demod m) + + add_executable(cohpsk_mod cohpsk_mod.c) +-target_link_libraries(cohpsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_mod codec2) + + add_executable(ofdm_get_test_bits ofdm_get_test_bits.c) +-target_link_libraries(ofdm_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_get_test_bits codec2) + + add_executable(ofdm_put_test_bits ofdm_put_test_bits.c) +-target_link_libraries(ofdm_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_put_test_bits codec2) + + add_executable(ofdm_mod ofdm_mod.c) +-target_link_libraries(ofdm_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_mod codec2) + + add_executable(ofdm_demod ofdm_demod.c octave.c) +-target_link_libraries(ofdm_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_demod codec2) + + add_executable(fmfsk_mod fmfsk_mod.c) +-target_link_libraries(fmfsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_mod codec2) + + add_executable(fmfsk_demod fmfsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fmfsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_demod codec2) + + add_executable(vhf_deframe_c2 vhf_deframe_c2.c) +-target_link_libraries(vhf_deframe_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_deframe_c2 codec2) + + add_executable(vhf_frame_c2 vhf_frame_c2.c) +-target_link_libraries(vhf_frame_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_frame_c2 codec2) + + add_executable(cohpsk_demod cohpsk_demod.c octave.c) +-target_link_libraries(cohpsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_demod codec2) + + add_executable(cohpsk_get_test_bits cohpsk_get_test_bits.c) +-target_link_libraries(cohpsk_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_get_test_bits codec2) + + add_executable(cohpsk_put_test_bits cohpsk_put_test_bits.c octave.c) +-target_link_libraries(cohpsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_put_test_bits codec2) + + add_executable(ch ch.c) +-target_link_libraries(ch ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ch codec2) + + add_executable(tollr tollr.c) + +@@ -388,10 +392,10 @@ add_executable(ldpc_noise ldpc_noise.c) + target_link_libraries(ldpc_noise m) + + add_executable(ldpc_enc ldpc_enc.c) +-target_link_libraries(ldpc_enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_enc codec2) + + add_executable(ldpc_dec ldpc_dec.c) +-target_link_libraries(ldpc_dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_dec codec2) + + install(TARGETS codec2 EXPORT codec2-config + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT lib -- 2.35.1 From fontaine.fabrice at gmail.com Tue Oct 25 22:14:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:14:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/libffi: bump to version 3.4.4 Message-ID: <20221025221445.352620-1-fontaine.fabrice@gmail.com> 3.4.4 Oct-23-2022 Important aarch64 fixes, including support for linux builds with Link Time Optimization (-flto). Fix x86 stdcall stack alignment. Fix x86 Windows msvc assembler compatibility. Fix moxie and or1k small structure args. https://github.com/libffi/libffi/releases/tag/v3.4.4 Signed-off-by: Fabrice Fontaine --- package/libffi/libffi.hash | 2 +- package/libffi/libffi.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libffi/libffi.hash b/package/libffi/libffi.hash index 689b5da4f1..8d2349ec21 100644 --- a/package/libffi/libffi.hash +++ b/package/libffi/libffi.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 4416dd92b6ae8fcb5b10421e711c4d3cb31203d77521a77d85d0102311e6c3b8 libffi-3.4.3.tar.gz +sha256 d66c56ad259a82cf2a9dfc408b32bf5da52371500b84745f7fb8b645712df676 libffi-3.4.4.tar.gz # License files, locally calculated sha256 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388 LICENSE diff --git a/package/libffi/libffi.mk b/package/libffi/libffi.mk index ecfa120c7a..8f6844113c 100644 --- a/package/libffi/libffi.mk +++ b/package/libffi/libffi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBFFI_VERSION = 3.4.3 +LIBFFI_VERSION = 3.4.4 LIBFFI_SITE = \ https://github.com/libffi/libffi/releases/download/v$(LIBFFI_VERSION) LIBFFI_LICENSE = MIT -- 2.35.1 From james.hilliard1 at gmail.com Tue Oct 25 22:36:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 16:36:39 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-bottle: bump to version 0.12.23 Message-ID: <20221025223639.550839-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-bottle/python-bottle.hash | 4 ++-- package/python-bottle/python-bottle.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-bottle/python-bottle.hash b/package/python-bottle/python-bottle.hash index b1cc2aac20..58bc52e3cb 100644 --- a/package/python-bottle/python-bottle.hash +++ b/package/python-bottle/python-bottle.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/bottle/json -md5 4934ad7347eef30db669ccd05283a5e0 bottle-0.12.21.tar.gz -sha256 787c61b6cc02b9c229bf2663011fac53dd8fc197f7f8ad2eeede29d888d7887e bottle-0.12.21.tar.gz +md5 d07df795cd4baa596ee803e964ba77fd bottle-0.12.23.tar.gz +sha256 683de3aa399fb26e87b274dbcf70b1a651385d459131716387abdc3792e04167 bottle-0.12.23.tar.gz # Locally computed sha256 checksums sha256 d0e7211f1c3c1a1c56f39d18bcb07f27f480c8a9552617756dda3a335933b8a6 LICENSE diff --git a/package/python-bottle/python-bottle.mk b/package/python-bottle/python-bottle.mk index ffea59f38f..e1691972c3 100644 --- a/package/python-bottle/python-bottle.mk +++ b/package/python-bottle/python-bottle.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_BOTTLE_VERSION = 0.12.21 +PYTHON_BOTTLE_VERSION = 0.12.23 PYTHON_BOTTLE_SOURCE = bottle-$(PYTHON_BOTTLE_VERSION).tar.gz -PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/95/e3/5749d7657b6fb38d65afb3c0b345514a783de7a9feb4fab594fa0bacc2a0 +PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/7c/58/75f3765b0a3f86ef0b6e0b23d0503920936752ca6e0fc27efce7403b01bd PYTHON_BOTTLE_LICENSE = MIT PYTHON_BOTTLE_LICENSE_FILES = LICENSE PYTHON_BOTTLE_CPE_ID_VENDOR = bottlepy -- 2.34.1 From fontaine.fabrice at gmail.com Tue Oct 25 22:38:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:38:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: fix uclibc build Message-ID: <20221025223804.583594-1-fontaine.fabrice@gmail.com> Fix the following uclibc build failure raised since bump to version 5.43 in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: file.c: In function 'fname_print': file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given 605 | putc(c); | ^ Fixes: - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 Signed-off-by: Fabrice Fontaine --- ...ile.c-fix-build-without-wide-support.patch | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 package/file/0001-src-file.c-fix-build-without-wide-support.patch diff --git a/package/file/0001-src-file.c-fix-build-without-wide-support.patch b/package/file/0001-src-file.c-fix-build-without-wide-support.patch new file mode 100644 index 0000000000..29be9fa2cd --- /dev/null +++ b/package/file/0001-src-file.c-fix-build-without-wide-support.patch @@ -0,0 +1,39 @@ +From f2ab09d0e1388657f6b7e62bacc383ebea91f5b9 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Wed, 26 Oct 2022 00:23:32 +0200 +Subject: [PATCH] src/file.c: fix build without wide support + +Fix the following build failure without wide support (e.g. on uclibc) +raised since version 5.43 and +https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: + +file.c: In function 'fname_print': +file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given + 605 | putc(c); + | ^ + +Fixes: + - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 + +Signed-off-by: Fabrice Fontaine +[Upstream status: https://bugs.astron.com/view.php?id=398] +--- + src/file.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/file.c b/src/file.c +index f5f46524..1c23defc 100644 +--- a/src/file.c ++++ b/src/file.c +@@ -615,7 +615,7 @@ fname_print(const char *inname) + for (i = 0; i < n; i++) { + unsigned char c = CAST(unsigned char, inname[i]); + if (isprint(c)) { +- putc(c); ++ putc(c, stdout); + continue; + } + file_octal(c); +-- +2.35.1 + -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 26 01:40:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 19:40:52 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-greenlet: bump to version 1.1.3.post0 Message-ID: <20221026014052.587418-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-greenlet/python-greenlet.hash | 4 ++-- package/python-greenlet/python-greenlet.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-greenlet/python-greenlet.hash b/package/python-greenlet/python-greenlet.hash index c1870c886d..8e2a95b03e 100644 --- a/package/python-greenlet/python-greenlet.hash +++ b/package/python-greenlet/python-greenlet.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/greenlet/json -md5 f424fbd9afeed575dd2ba5f0ac66e30b greenlet-1.1.2.tar.gz -sha256 e30f5ea4ae2346e62cedde8794a56858a67b878dd79f7df76a0767e356b1744a greenlet-1.1.2.tar.gz +md5 b3e86eb9ab0908e6e3ef542e9b94d7e1 greenlet-1.1.3.post0.tar.gz +sha256 f5e09dc5c6e1796969fd4b775ea1417d70e49a5df29aaa8e5d10675d9e11872c greenlet-1.1.3.post0.tar.gz # Locally computed sha256 checksums sha256 769831d6e5dfaf2c20802faccff1fafb4c2025dd8f6253dfa47fcad59d4d0979 LICENSE sha256 e5ff3c23c110e494cd7d736c10fd96d462457bafeca310840db6527298c7d46b LICENSE.PSF diff --git a/package/python-greenlet/python-greenlet.mk b/package/python-greenlet/python-greenlet.mk index 72d2747970..b4a0e5af08 100644 --- a/package/python-greenlet/python-greenlet.mk +++ b/package/python-greenlet/python-greenlet.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_GREENLET_VERSION = 1.1.2 +PYTHON_GREENLET_VERSION = 1.1.3.post0 PYTHON_GREENLET_SOURCE = greenlet-$(PYTHON_GREENLET_VERSION).tar.gz -PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/0c/10/754e21b5bea89d0e73f99d60c83754df7cc64db74f47d98ab187669ce341 +PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/ea/37/e54ce453b298e890f59dba3db32461579328a07d5b65e3eabf80f971c099 PYTHON_GREENLET_SETUP_TYPE = setuptools PYTHON_GREENLET_LICENSE = MIT, PSF-2.0 PYTHON_GREENLET_LICENSE_FILES = LICENSE LICENSE.PSF -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 26 02:35:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 20:35:05 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-numpy: bump to version 1.23.4 Message-ID: <20221026023505.616591-1-james.hilliard1@gmail.com> License hash changed due to date update: https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 Signed-off-by: James Hilliard --- package/python-numpy/python-numpy.hash | 8 ++++---- package/python-numpy/python-numpy.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-numpy/python-numpy.hash b/package/python-numpy/python-numpy.hash index c0dcc5d27f..2a2dec44da 100644 --- a/package/python-numpy/python-numpy.hash +++ b/package/python-numpy/python-numpy.hash @@ -1,8 +1,8 @@ -# Copied from https://github.com/numpy/numpy/releases/tag/v1.21.2 -sha256 76af194fbc117934ec5bbe2ff15177adbd05aeed23f18ee209ed88edcd777e05 numpy-1.21.2.tar.gz +# Copied from https://github.com/numpy/numpy/releases/tag/v1.23.4 +sha256 ed2cc92af0efad20198638c69bb0fc2870a58dabfba6eb722c933b48556c686c numpy-1.23.4.tar.gz # License files, locally calculated -sha256 bc1b0af15cdc9415ea26c5f1df352c226ac86425ec0fb9ab38d111018bf1c6f2 LICENSE.txt -sha256 2be6947e0432ecf7950ee8fe38681316749dd06d1de17c9ec4de6d2f55adb3a1 numpy/core/src/multiarray/dragon4.c +sha256 0f88787955e7131224f53a8c3f3e859dc502408e3a539a4dcf61fb7888b5b984 LICENSE.txt +sha256 c27d0a8026bdb8876562b720ab24d1688e3827a89f6083cd6e7e8caa9584aba3 numpy/core/src/multiarray/dragon4.c sha256 fbc539f47d0cf83bc61378080fb873d5c14630126cacbfe754035c3926daa5ec numpy/core/include/numpy/libdivide/LICENSE.txt sha256 a14cc25e10d40a3aa705b7de2fb764a6535d8ee9b2db4e1724900585457dfd55 numpy/linalg/lapack_lite/LICENSE.txt sha256 badf51c7e3e7de9c7630bd069780f5c197b846ef7660b342a1e58d5553592d8e tools/npy_tempita/license.txt diff --git a/package/python-numpy/python-numpy.mk b/package/python-numpy/python-numpy.mk index 417fe81f57..4f4848c4ba 100644 --- a/package/python-numpy/python-numpy.mk +++ b/package/python-numpy/python-numpy.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_NUMPY_VERSION = 1.21.2 +PYTHON_NUMPY_VERSION = 1.23.4 PYTHON_NUMPY_SOURCE = numpy-$(PYTHON_NUMPY_VERSION).tar.gz PYTHON_NUMPY_SITE = https://github.com/numpy/numpy/releases/download/v$(PYTHON_NUMPY_VERSION) PYTHON_NUMPY_LICENSE = BSD-3-Clause, MIT, Zlib -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 26 03:11:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 21:11:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pyzmq: bump to version 24.0.1 Message-ID: <20221026031157.658391-1-james.hilliard1@gmail.com> Migrate to setuptools infrastructure. Add new host-python-packaging dependency. Refresh zmq version override patch. Signed-off-by: James Hilliard --- ...-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++------ package/python-pyzmq/python-pyzmq.hash | 4 +- package/python-pyzmq/python-pyzmq.mk | 8 ++-- 3 files changed, 31 insertions(+), 18 deletions(-) rename package/python-pyzmq/{0001-use-buildroot-zmq-version-instead-of-detect.patch => 0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch} (55%) diff --git a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch similarity index 55% rename from package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch rename to package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch index 315c8c8bb2..18553582f4 100644 --- a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch +++ b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch @@ -1,4 +1,8 @@ -detect.py: fix the ZMQ version check to the ZMQ version of the buildroot +From 8eae1193457f72899f9cc2254ae1489026df9bb6 Mon Sep 17 00:00:00 2001 +From: Michael Rommel +Date: Sat, 10 Aug 2013 00:44:35 +0200 +Subject: [PATCH] detect.py: fix the ZMQ version check to the ZMQ version of + the buildroot The setup.py script tries to compile a test C program and runs it, to retrieve a version string for the installed ZMQ library, but if the cross @@ -17,38 +21,47 @@ Flandrin. Modified for version 18.0.2 by Asaf Kahlon +Modified for version 24.0.1 by James Hilliard + +Signed-off-by: Michael Rommel Signed-off-by: Lionel Flandrin Signed-off-by: Asaf Kahlon +Signed-off-by: James Hilliard --- buildutils/detect.py | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/buildutils/detect.py b/buildutils/detect.py -index d1380fe..4a91351 100644 +index 842e3b14..e2eca744 100644 --- a/buildutils/detect.py +++ b/buildutils/detect.py -@@ -120,13 +120,15 @@ def detect_zmq(basedir, compiler=None, **compiler_attrs): +@@ -120,18 +120,20 @@ def detect_zmq(basedir, compiler, **compiler_attrs): cc = get_compiler(compiler=compiler, **compiler_attrs) efile = test_compilation(cfile, compiler=cc, **compiler_attrs) - patch_lib_paths(efile, cc.library_dirs) + #patch_lib_paths(efile, cc.library_dirs) -- rc, so, se = get_output_error([efile]) + # add library dirs to %PATH% for windows + env = os.environ.copy() + if sys.platform.startswith("win"): + env["PATH"] = os.pathsep.join([env["PATH"]] + cc.library_dirs) + +- rc, so, se = get_output_error([efile], env=env) - if rc: -- msg = "Error running version detection script:\n%s\n%s" % (so,se) +- msg = f"Error running version detection script:\n{so}\n{se}" - logging.error(msg) -- raise IOError(msg) -+ #rc, so, se = get_output_error([efile]) -+ # if rc: -+ # msg = "Error running version detection script:\n%s\n%s" % (so,se) +- raise OSError(msg) ++ #rc, so, se = get_output_error([efile], env=env) ++ #if rc: ++ # msg = f"Error running version detection script:\n{so}\n{se}" + # logging.error(msg) -+ # raise IOError(msg) ++ # raise OSError(msg) + + so = "vers: ##ZEROMQ_VERSION##" - handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} + handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} -- -2.20.1 +2.34.1 diff --git a/package/python-pyzmq/python-pyzmq.hash b/package/python-pyzmq/python-pyzmq.hash index ecf6489249..efbc91d83c 100644 --- a/package/python-pyzmq/python-pyzmq.hash +++ b/package/python-pyzmq/python-pyzmq.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pyzmq/json -md5 200abc1a75bdcfff7adf61304f46f55e pyzmq-19.0.2.tar.gz -sha256 296540a065c8c21b26d63e3cea2d1d57902373b16e4256afe46422691903a438 pyzmq-19.0.2.tar.gz +md5 f10b7c3dee2c03557e2c5d00b73dfc7f pyzmq-24.0.1.tar.gz +sha256 216f5d7dbb67166759e59b0479bca82b8acf9bed6015b526b8eb10143fb08e77 pyzmq-24.0.1.tar.gz # Locally computed sha256 checksums sha256 aef3b80570351d44e29c22d080d4e9e106b34f3fdbc5cdf9636994474c72b1a2 COPYING.BSD sha256 44b23767df3c0fe27f88981f09bc7f50a1695cec4b24252fa5f55f03e76bcd6d COPYING.LESSER diff --git a/package/python-pyzmq/python-pyzmq.mk b/package/python-pyzmq/python-pyzmq.mk index d1f4314a1e..5792957eaf 100644 --- a/package/python-pyzmq/python-pyzmq.mk +++ b/package/python-pyzmq/python-pyzmq.mk @@ -4,14 +4,14 @@ # ################################################################################ -PYTHON_PYZMQ_VERSION = 19.0.2 +PYTHON_PYZMQ_VERSION = 24.0.1 PYTHON_PYZMQ_SOURCE = pyzmq-$(PYTHON_PYZMQ_VERSION).tar.gz -PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/05/77/7483975d84fe1fd24cc67881ba7810e0e7b3ee6c2a0e002a5d6703cca49b +PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/46/0d/b06cf99a64d4187632f4ac9ddf6be99cd35de06fe72d75140496a8e0eef5 PYTHON_PYZMQ_LICENSE = LGPL-3.0+, BSD-3-Clause, Apache-2.0 # Apache license only online: http://www.apache.org/licenses/LICENSE-2.0 PYTHON_PYZMQ_LICENSE_FILES = COPYING.LESSER COPYING.BSD -PYTHON_PYZMQ_DEPENDENCIES = zeromq -PYTHON_PYZMQ_SETUP_TYPE = distutils +PYTHON_PYZMQ_DEPENDENCIES = host-python-packaging zeromq +PYTHON_PYZMQ_SETUP_TYPE = setuptools PYTHON_PYZMQ_BUILD_OPTS = --zmq=$(STAGING_DIR)/usr # Due to issues with cross-compiling, hardcode to the zeromq in BR -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 26 05:35:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 05:35:53 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-25 Message-ID: <20221026053600.65F1940126@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-25 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 0 | 0 | 6 | 2022.08.x | 16 | 14 | 0 | 30 | master | 111 | 272 | 11 | 394 | Classification of failures by reason for master ----------------------------------------------- host-bootgen-xilinx_v2022.2 | 16 libnss-3.84 | 16 crun-1.5 | 15 glibc-2.36-44-g2628500f5dff... | 15 host-f2fs-tools-1.15.0 | 14 libcodec2-1.0.5 | 14 sysvinit-2.99 | 11 brltty | 10 host-sentry-cli-1.59.0 | 9 systemd-250.4 | 9 linux-6.0.1 | 8 file-5.43 | 7 libarchive-3.6.1 | 7 libshout-2.4.6 | 6 host-binutils-2.38 | 5 igd2-for-linux-2.1 | 5 host-pahole-73383b3a39afe86... | 4 host-rust-1.64.0 | 4 unknown | 4 btrfs-progs-5.16.2 | 3 dahdi-linux-5c840cf43838e06... | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 host-spirv-llvm-translator-... | 3 libcurl-7.84.0 | 3 libglib2-2.72.3 | 3 ulog-0389d243352255f6182326... | 3 xz-5.2.7 | 3 autofs-5.1.8 | 2 dash-0.5.11.5 | 2 freeradius-server-3.2.0 | 2 frr-8.3.1 | 2 gerbera-1.10.0 | 2 gobject-introspection-1.72.0 | 2 libpciaccess-0.17 | 2 linuxptp-3.1.1 | 2 musl-1.2.3 | 2 perl-5.34.1 | 2 procps-ng-3.3.17 | 2 pv-1.6.20 | 2 qemu-7.1.0 | 2 tealdeer-1.5.0 | 2 wolfssl-5.5.1 | 2 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 batman-adv-2021.4 | 1 binutils-arc-2020.09-release | 1 botan-2.19.2 | 1 brltty-6.5 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 dieharder-3.31.1 | 1 dmalloc-5.6.5 | 1 efivar-38 | 1 f2fs-tools-1.15.0 | 1 ffmpeg-4.4.3 | 1 fontconfig-2.13.1 | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gensio-2.5.5 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 gsl-2.6 | 1 host-binutils-2.37 | 1 host-binutils-2.39 | 1 host-gcc-initial-12.2.0 | 1 jailhouse-0.12 | 1 json-c-0.16 | 1 libcap-ng-0.8.3 | 1 libdeflate-1.12 | 1 libgpg-error-1.45 | 1 libsigrok-0.5.2 | 1 linux-5.10.145-cip17 | 1 linux-5.10.145-cip17-rt7 | 1 mesa3d-22.1.6 | 1 mongodb-4.2.18 | 1 mtd-2.1.3 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 opus-1.3.1 | 1 python3-3.10.8 | 1 rauc-1.8 | 1 rtl8189es-39c17661136da48f8... | 1 syslinux-6.03 | 1 toolchain-external-codescap... | 1 uclibc-1.0.42 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ed4019939234b3dd4fe53779aedc2a7e6f08230a | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/e03b40c043484c581e55117f443b91dc6bf808a2 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4c60dec5f5eb7a772dc74d22bc59972a8a4da191 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/e6acf63734cbd6293fd503da2f650f99ac35e3ed | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5d62f1e24c3e10094e213ca5bc24dcf38f2c3783 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/de844aa47ce720d07f23d606f471fd405ef41b18 | arm | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/169e5cfa8fdf7245ebb5c528d90c9a6385bb56bf | arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/58a141b5f29742b51916de8e7c12f7c91ddcaae1 | aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/3bf4e4a3e4bf8e2b7799cdaa79ede9179eba3849 | ORPH sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/2e47bb5ae3f8e89daa6bfe74f0881da2ea7820f7 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/f444f2d65b58c13518fd86e146c072ad4222842c | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/815423c263cd49ed674d18da3ab0e05d57222539 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/86e4f11c40b8b05e8e3035fc4bf6d8496502c65d | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/603a35ff94fd35cc402c533d9cc534f0bf95cb4d | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/44458b0699090e11b6718ac670a4e18688d5ecd3 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/8ff467826a647c1e72374e70cf6d8afd18d7d1b5 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/403e606631c4f7b3884b9b7334b16e580a28d451 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/c68b4ec80f458df7bd74ebc212655289eee2243e | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/ee6acfe358b038cf9ea385fdad0af027e3ea688d | mipsel | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/086d55014e5d38b0a1f94b77fc2973ded73b557e | sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a03d5e244442a4ff89cae055b32f5776b4088324 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c7828e07250efe4de9ad3d78069109c37697709d | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a335453d4f074fc59b3e81253d41c8fa18e972f6 | ORPH aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/e9aee329712c71f206ab7b858b10cbaab285a65d | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f23031097bc23561b304a15778eb10720c1e3e55 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/113f4d0ae5dc83a025bbb14387c9ee98853af264 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a52bfdd5e6c6241d2dcffbf225157ff207262f98 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3b60ec95bc2c313945eb2fcad47e263547b2e2ed | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8734087874330c6c9b01df977f09bdba0c55b779 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0379a05f4dd9fc9bd652ad10e22f94fbf80b6cbe | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20ef943c52b4d7a9d895f01d591de7351d70aa52 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20624ae601cdc66cee5995abe180b4c039ef36a4 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/48b0e91b43494bf349343794079eec061cae0e36 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8166e44cc42a6f2d61d1d524299f34a3ec6b151e | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5e6a39f5a8d4e7a053e8c1ec83662d37f63b8503 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/45282a1ba0b098f2a32f7124d25653779afe5ed4 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a5a164ac13582c009c91f0bfec008f464b1c133 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b810478966037c2c461f73a87f8c2dbb58636b6a | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/589eae62b1affeadcb4cbc482bd9ddba3812089d | arc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e1f92d6a15dfe0d6c59eeab9b93e4ea2a91832bf | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/bbbe7c05ea70691f0eb71c7eb93862f63c9a248b | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f4dc801fe5b0d807fd07bac3e8e5ef41eab70e4f | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/1e6db487b9cdebecff8b64f8ee9b6c238b736a61 | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5b4e450114f0c617092801b2e60af820c2f1d73e | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/702ff3704e4e69f46dd0155ce864e0783cbc652c | ORPH i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/18075baef542f49bb80e3bcad7988698c3306be3 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e270923ce72fce116b05c1d1e22e805dcd0d910 | s390x | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/65cf0430562a1f3b54f4856f9b04db060adb4451 | sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/cf77bfd6b256a66765732621440ff8959904635d | ORPH arc | file-5.43 | NOK | http://autobuild.buildroot.net/results/b4096390133b8cba9da31e2825531d0dec1d1d14 | ORPH mips64el | file-5.43 | NOK | http://autobuild.buildroot.net/results/1071f7f2a9fb365bbbb41943f3003c25d31f3e16 | ORPH arceb | file-5.43 | NOK | http://autobuild.buildroot.net/results/58dc2bcb479003fe27014c7484c0c1334d7a5319 | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/2233164e9edd8eb9275da6239871a374daf67323 | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/34cb3fff617704e64950c4a21d7702b339fffe6e | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/84c2d9d11e3ec7ac435109028ab3466e51ba3dca | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/ad3a933af6a1e3a0156fa8e5201104bcf5d060fd | ORPH mips64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/048bf652d3f79fe222fa646154ae2bec8d09db58 | aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b016384ef3b82cabd14172ca4793f404a0cf2426 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/107e737822a4177491059d6d4b9b2df6be887dd0 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/74fcf0ff2b5ba0b41bd5f929288220aa561f195a | x86_64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/4a1b0193df05c68e2ebce92d8f881283c3127cef | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/8c55309858770022a2ad76cf8f318bc9d6d24a79 | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9b018cf65284836aaec404e924355ec1161b202a | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fe5d4f1ffc882353b9edfb89971965e424d461d8 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9388b004ddb46174c6bc7cdc461b3eab9380ee39 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad21aa4b1da66a6bd939dfbf37534bd3a2fd0f94 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eeacbc436cca77b63ca359968010baf3bbbf5def | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5fa66921aa84badab17c4266083567f9772f584 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/167ffe986a215c09a9cc5ca7375f26ec54985197 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c5b8372bd2aac0053b7d6ed746fa26034a2bf6a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffdafaee3af8e29aeef0253c7c98fbca62b5fb89 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1c634d445f93e0a7cea3979cecf9bbd4a07ff74 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3bb7a114bc96b06b49cabb9b0ff67dc9ad0d2ed9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c2b37ba8f5dced727016545520ecef2c7d2e646 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c74c8a58a216293d41a4f0494035e6787f0a8f2 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a62bf159e5bf7ba719ab8d6c5572e12683ad00f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a83b23f6b5f8fbedd32db4b529301ba69ccd52c | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2416e484f1e8dbc40d7427fbe44f155ed4f4663b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faad2a692e763c75dcca3604429d008ab9cb312e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f2f6d689c5aa7ce891c634f0bb4313134495afb | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/ed794adf3c2617becbcb4609dfbd09f123611eea | ORPH armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d01e1a88d6cbf91bc4b76ec346bd011c96c3b34f | microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8555602dac396651a5ba9e8a1710efc6dee29a8b | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/aa5eb499b86667c6e6e432d72761f8848fba36f7 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/9414b17146f6fd51ac8652f77c0abd8192eef01d | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/31892826debb1d66d654e02d84281ee5b2219587 | ORPH or1k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/346e32d76700672985ff28cae772d06d7f9bf74b | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c1834e918bcb5093ad99e887d3532dc5d8757890 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/58a1a03231367a15537a9bb1b66c6bcd99a37351 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/789fbc0e9a8b337fad84d144baad69908829066a | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/df0a50faea0425e396b11d296ee83a0b24eb4485 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2318556c0344441739d26c37445285ccd2a10b21 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/deefde9eefec07baf373550a2d3c534bd458b029 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/20f564c56145cd6b3e9b74c3a0010c04534b9027 | aarch64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/d82c1da61f41a7b2bbd12f7213c303b8146d77ef | arceb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/b9c8147bdc1ac287aa8736892facf9196809b730 | riscv32 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/25103af38fa24fb53455bb3742476ec1f6406c31 | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4bf2cb23e00918e3fa35cc08897f17d8d5d47eec | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/72410364c8af83ab695d20ab79e0190b3c7888f6 | xtensa | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/587711f411b4029c59153528d5fc1fa284b09c36 | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/ec78dd52ab988afc2f3405dc67ed667b4745b5c3 | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3d62cade51b67a674e2c8421fb3cdb45cefd7fad | aarch64_be | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3a8b66027cde3cdd9d02745381526d52bb626a78 | or1k | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/15ee18e1347bb090dabb91aef10117f7da1fd88c | sparc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/7ea9485e22042c774e9f48ee9a19a287ace9f31b | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/638b917b5efe5f85a82c067178ec1f03905c1524 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/19af48316d0f03528838394848e98c9ac92c1a72 | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/898e731396cde987d8e457bb8f1c1c11c9c1a73b | powerpc64le | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/57708223585baee2b0a28cfb7256c8bd1046e8ec | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6833fd6ca0ebef791ed9e8465fdb07cb6f6d48ee | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/df1c51b49e08458974e7bb3cd98240dd34041fa8 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5867c3f970d59f1436f48438d6f091403916abbb | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3c5acc12455ae710c202aafaf02066edb8fc796 | sh4a | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/123cb15a84cbf061195f87dc562159fb80ce188f | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/41c626cb473b9d7e04fecab0d1cc3a4b18e47693 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5cf06c73cea1db6e3acc56b12a019c8d460abad5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2ecb1f3f1dfc3151738bf2f13fbc06ed1756ce33 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a364d59831ff9e930ae5d8d5e028ba3783b1acff | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e592f7de2bcc4b5c73103009a54b8b5721664555 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/62cf41cf5825161c992aec97df38a1fdfe24a5cf | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/71d88ea6d163a244effdafccf42b7c13504789b3 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6d0d63d4b7788a16aacfd2490202db667439a9a8 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89cf1645f9777e5ba0b986b98c21e4858acee8e4 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/17501a2526b485cf8b4129fcecf06e9f330f4cf4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/723183f354ff65cea41b860d96649dea02ee92e6 | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0954eddb5c65f80c948e32bcc7aa290edf147130 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/92649ba56560332ab65e554b32253f89a7226b1b | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e53df1cf298e691105caf4f48a48b13d5d2717da | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/da885647912398a223369b413f19996861daede0 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f79347039fcda74d894257a6f8087ea0b32ff4f9 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/833856008f3ce6ac28c92437264e989687f1cdb4 | riscv64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4b0ecf5800a07e4a87b697b2c939ae0e9753f3f2 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0b2f52a84a73455e031791cd88dd25b82a3f16ce | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bb79f3cd4232c1f3f4aaedd1fb8756fa69f0f395 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bf3ecf23435bd4d686d85ca0c524645c82317440 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0eaea2489da7a769263938f07dc4789f5af3add1 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68cd593b796a8cb35b351bd1b6d203456eb9250d | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4fa6f631e7eb53102bbd2308b62c8fdbdc37a6b7 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d1ef488625827e4fbf3fca7776e85787bb47bf93 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b1867909d1e750e4cd58fc1cb100d0f400450e4 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/46c597cd8d749ab1b905b49a7d2e02cb9eaa00bd | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/77319c40ad5443931d44eaf17417116fc6009c39 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/79e0809e05c65c3dbd338437e2b6151a26ff60b3 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5a2d886666a98784a56c1f50c4bb10e52d146f4e | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/74f254df3fdd3e377dce57d5075b57b561a4f31a | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/c32fb504180aa9e945415a1434c391a8bb176366 | ORPH arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/a986effee48b9f3c0cd5088f2ef614fdbd43eec7 | ORPH riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/d464b39ffdfc9f002eb466fc566946ec11b89434 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3a3571bdf4e930b5e3c687e863191b69fffcbac9 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dd238e6285ed767debfbd9b978bfd68bed4993a4 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/91a5c464d440c36e1e1bdef8e8ee8f78e6721a4a | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/960d9474d36412520f4eeab53cd9a286d804a011 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/49d863ce5114e114549655bddbb4d2af64c3c447 | x86_64 | jailhouse-0.12 | NOK | http://autobuild.buildroot.net/results/d3d004570d9707efaf6e1193ed5320db8e3b0933 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/a8e2c2bbae59b566621bc0020b28f669beacce61 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b7649f58bc186a77d81c970b3052adb1193ff79e | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8d17f470883f3f380f666a0bcd30e754387fdc52 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/528d651842077938a81c4187ca46f61835f4bdee | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/64c19986cca7b7943c114492ee7ca36bb9dd0c96 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/82ff22ba728f1ec24c58ba20a46bde3432a98764 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc17d2bb5f0d25e31cace1e6e0f26e04ea49a431 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/72765a30f117c00e029142189616449368f7fec4 | sparc | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/2d018aa2c071b0e7216dad28132cfd2b303f00c1 | xtensa | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/76bee4244fe00cbb8bf79e9af30cf4a3ec3bf949 | sh4eb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/33bb7bada67ee0ea464ce4377d421edcafefbdfb | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/499db221b13aecf8a076b2495fa77135640f5ec3 | mips | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/21b587f3dd3ecd720e73ef76208857aa09a2a2c1 | arceb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/7383b082c95215170fd0f27d00f95ea190224256 | arm | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/94c8eb7c4d08149c61982ba62b2cb1c9951e2714 | x86_64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/876bc2d53dbe8960d764f42db2a957046d8378d6 | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/42b78404af8df32cc1f0bf18d03eb2c71e427efc | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/30f3b320f1e39b55f3dc7e4271e63bcc3ea8c689 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/a74e035c5db7f026df0cefbe21c1d906d5b1e6c9 | aarch64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/4fec694be19772987448b1ec5c133c00a2dc2797 | microblaze | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3c10602905920197455b2c9c7e5ae435f72e4590 | mips | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/2a284cb7f68b2d0bd992020babe1490b0007672b | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/ec7106fef04f9e041642753f147769324291246a | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/29dd27a9bc07c763a4969dcd998688e51b127f2a | aarch64 | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/7b175ba0149a2ba09df9faf33fac4d4d3c65fdcd | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/dde4b7b3847d8c238c3cf86c44b69da97c4e8ce2 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d6401d9aeb1774b2a499b2c06a9ae9fe17a5899c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/28cfef22fced8becc91c2bfa7f4147fd94542ba8 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6d04acec2457d08ee27592b357e9539c4750d47f | ORPH s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2977cd5f41ebf3ee4eba3b630a9626663ed8226a | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0300400b7773004db129f515bb2d67443085998c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c21264deafe7068997dc17f83cee7f073c1ac407 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0a42e53e814e5d4eb3df57f0eb120513333db313 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/066562d0b986f6db5467fc4b664febcbc55376d7 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3e0eaed94f8a33f64a9b743ae42509deb0d69248 | sh4eb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5cd4ea0b3889695dec2346faf68505cb8ef2bbc1 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6e542771f43e2776e54ada02dccd5ab65f0af297 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/89833d93f30a77cafc6a21a50b5be0d27dec4262 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e4310463b981bca936b469c058cb9416207274f8 | sh4a | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/96d2ed98fa9c7f9fce9a247ca779ec1b82b00e85 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/18c7a1634d27284ca79f3d2fa74b1c637ac92412 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5741af8359a98619cdb9d60d4a6f2c6222cd7f8f | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/985e97d1b52eba06a4bca08e1c28f5859a439b2c | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/60cecd4242430beb03992af3b6639973958e422a | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/55c98518b0a6c98f86c557eedb814f346d55e2ef | sparc | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/253448b55eec64966a739fe110473ee869308e3a | xtensa | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/d41509feaa889979668fa5105ca1defca71567a6 | powerpc64le | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/84e65414f445d414d0d6a51f51fccaa1ef61f2a4 | ORPH arm | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/d897ab02cd28ff033ca259e95e960ad61f2a9345 | ORPH mips | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/2337975f71759d637691c9daf7d9f3b9216da2f7 | ORPH armeb | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/aa0efb3a5d9402b8dd4ce59ee12e22b8aa26cb42 | ORPH mips64 | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/d706b066554681c2c965dab5babb3649bf568266 | ORPH mipsel | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/f137201cf1f2fd5d5e5e64152bc2fcc73f344a61 | ORPH arc | libsigrok-0.5.2 | NOK | http://autobuild.buildroot.net/results/ce81c4d3fcb941a8efb0f0fca62ababa9d36bb88 | armeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/de47c3954c53ec51cb46349f35e69427d0dfe0a8 | ORPH aarch64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/28a8c9c01eb32ea4bc0524f6c7a4b79cf9ddf8a7 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1d4866d20960667ccc3eed399838ef5a740e5058 | ORPH x86_64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7605a619b0ee21f6905393922c3eaa35af28bef0 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/8380f86b05c5855cb526fa77053cf3c63089e7ca | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d86fcc25709a42b0698832d55056bfd436b2a7a8 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4b3a638abd44362584d7ca4aff427bcc49fff24c | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/5aa14c86e2b90e31debb46e5c95e3b165d7ccc78 | ORPH aarch64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b5f32b29873a7a4864c886004474f750bb4736fb | ORPH sh4 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6c1c18eb968e11cf43beb10eea89762e7172f588 | ORPH armeb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/cd88c3538548c3cc0fd28438e23e58b98ac7f280 | arc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/438b8ff17e335a430148ba1df95e11a8db618ea9 | arm | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/00b9e2b49bbd519265065cf91c3c103ae8bbed75 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/9dcad8d3faee19045627b740f93ef4ff845f3194 | or1k | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/e88613ec43ea5e945275c76da5515e175fc69460 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/3dc9a59ef5c8a867962c657c78a5b3ca3fe068d6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/d1bbc7f2e5b2a2cde0a8bca81a4e29f37346f156 | arceb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/0c52b3b91edf1032d5cd3313c9dd9aab700936db | x86_64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/1d46bffbe93d30f5ebfc735a281bc8c2f7f8b4ae | ORPH arm | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/fe8a78e5d87056600a84ffe1e9fb66bdeac50e10 | armeb | opus-1.3.1 | NOK | http://autobuild.buildroot.net/results/19121f049b9f0d1e71512bcb9cee51b5928a38a0 | ORPH armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/37114d380eaf223ba5df008e8f1b5bb99ddfeec0 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e69e9c99693a4eff3e2105380631be397c13dd86 | powerpc64le | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/1977a3bf24f28736f569e6fe6728cb981527c31f | ORPH aarch64_be | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/dd10cc00451038e75365a3df9c119a8ad039ba99 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/5e4a35fd5ffa5a75326d9afd4f56ee926182a1f7 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/cb1983ed30a3dd4f27322c500834da240f2361f2 | ORPH x86_64 | python3-3.10.8 | NOK | http://autobuild.buildroot.net/results/7ce0f2c0e71271bd10646587fa36831344ff3a9d | mips | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/ab7b7a721fedb2ed48d4021a803b51ca541f70a3 | riscv32 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/37e49f39c5b409da63c8d938d1c0e99642b36306 | or1k | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/390f3af816da1ce50ec23e7762848254514c5371 | s390x | rtl8189es-39c17661136da48f8... | NOK | http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce | x86_64 | syslinux-6.03 | NOK | http://autobuild.buildroot.net/results/44b7eacc00c5129b6304b0f5d838351c866cb69c | ORPH mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2df61d462f758b91def0bc202b041f3c91ba99b9 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e9b4d38fb1ff348350dd736cc16338be5408d02f | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/079ad8b99220acfff0ee046e9b2de24214c02156 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/69f5d25ae560648dbe985f2622c84a1ad5260e08 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5cb591d7c6484eed3414864c6d3ec234fa7f14ed | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2b4b99068337a8c39c43fdc4c588b7069eae3848 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6af693e1e849906f7c82b57ed3b5528ab186b285 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bacb535c23fad6f2ae7682a109fbd482aebd8112 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f397642867b1c838fc00c69e6b260504cc9936c9 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a33ba8f9511260e6591257c78afc2982eb4bc97c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/927fc73d148f8449d5ddf07e069a6fe185fbfaa3 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/455bc800cb2a1ea6f63f435f5b62f32daa3ddb6b | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d34294aa011c029958cc92ed14725e8dfe73154 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5646113b89ba2360162df5dd827de99dad2652cb | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/70a67823b800fb58247d1e65e46280a081815fdf | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4930bee86b85fad2fb5cdcf4fc9e996bf0ada7bf | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3c55f27e92c1672ca892696fd109fd46aeaad372 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01a36d660d3d00b67c87f10d306415c024dd3e19 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2eab3a2658de10243362090aba0ce53add5692f0 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/ba0dbd91a5f0b0d464196340070e7a5eee88c3ab | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/9b0e6cf96d499c47a5c6b16704a62a7c1f765bfc | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a72d86ac87be512241793122a90bdd980a6b26cf | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5a9b70a61a15126b9ee7486a9182458b12a4c21a | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/bb861d6833fa6670812c2774b8eea8a51a523810 | sparc | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7047627ac8cf09ef36093e338fc6a497e7804ec8 | powerpc64le | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/a5b19154acc61ff2845da2264c9e976cf885a079 | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/5983a813e777978e0c86ddf4cbb220ebf7b29645 | arc | unknown | NOK | http://autobuild.buildroot.net/results/b3d3a023d52983e952c480b5e784222c7da97789 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/fb1804ee32ef3232cfc7c16d8f8c51e47f2e56e3 | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/4e92e6af2acdb5ba520ff575a02997a2384610b7 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/ef3b188b42df8dc67358887eec966e1aeb72c283 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/d6429a1e4b0c1ee9fbd5dc03a97617aef51cd53a | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bd1e7ebe0aafe8e8b1bde48db3e37616f60bc122 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bceb29111de25f5e08bb757201d087252ba52ce9 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c2190026461156c3dd0c4bdb3f5a75499f0898b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/f5e62a046d47d856c89255964c4f27ae796913f1 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 gummiboot-2bcd919c681c952eb... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 libmdbx-0.11.12 | 1 libphidget-2.1.9.20190409 | 1 libselinux-3.3 | 1 linux-5.17.15 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/678759e312c41f125801624eaeb9b3e67da3c4a3 | s390x | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/874b7b27b5a247c7b6ac35533da9543065f81a46 | mipsel | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/30b548f4f46c16203d8ba6af405ac163f5965952 | i586 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/05711691cc8848bd056323bb6a2967130899d810 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3243e5634fe4f898e48e0cfb2d30319e22458120 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7ad2d242f0b8e92a50022d449c2af5e6f55f219a | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/4a8078b084565f3ecbfa0588fb0ace92e215e790 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/689671a4582a803b5a065a09514342a136b647dc | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/45b3af6d9389695827adf8b61383744b12f3e220 | ORPH microblazeel | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/08c43b1e1ce75fda2f3c46fa945b0c60cfe710cd | or1k | libphidget-2.1.9.20190409 | NOK | http://autobuild.buildroot.net/results/a8612967d69fbab11c27b0cacbd18904bea3cbac | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/b0b426765e168e56ee004be973fa48436d1ad3cd | arceb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/b5fdf50afac521b763853df8288db7d2b8a2b798 | ORPH xtensa | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/01994ae49a606a700c6fbb6eb09a8dc97ffe53d5 | -- http://autobuild.buildroot.net From romain.naour at smile.fr Wed Oct 26 08:48:14 2022 From: romain.naour at smile.fr (Romain Naour) Date: Wed, 26 Oct 2022 10:48:14 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: Hello Thomas, Le 25/10/2022 ? 22:13, Thomas Petazzoni via buildroot a ?crit?: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. It seems glibc 2.36 was not used last time the toolchain-builder was used (indeed it was glibc 2.35-134...) Maybe building all qemu defconfig would trigger the issue since now glibc is used by default. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. Anyway, our toolchain testing with toolchain-builder or qemu defconfig would not dectect such issue. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 Reviewed-by: Romain Naour Best regards, Romain > > Signed-off-by: Thomas Petazzoni > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > From peter at korsgaard.com Wed Oct 26 08:53:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:53:42 +0200 Subject: [Buildroot] [PATCH] package/squid: security bump to version 5.7 In-Reply-To: <20221018082548.1987175-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 18 Oct 2022 10:25:48 +0200") References: <20221018082548.1987175-1-peter@korsgaard.com> Message-ID: <874jvr0xux.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Fixes the following security issues: > - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager > https://www.openwall.com/lists/oss-security/2022/09/23/1 > - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication > https://www.openwall.com/lists/oss-security/2022/09/23/2 > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:54:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:54:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/imagemagick: security bump to version 7.1.0-51 In-Reply-To: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 20:23:34 +0200") References: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t3yngw.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-3213: A heap buffer overflow issue was found in > ImageMagick. When an application processes a malformed TIFF file, it > could lead to undefined behavior or a crash causing a denial of > service. > https://github.com/ImageMagick/Website/blob/main/ChangeLog.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:54:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:54:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/poppler: security bump to version 22.10.0 In-Reply-To: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 22:00:51 +0200") References: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3ryngj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an > integer overflow in the JBIG2 decoder > (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a > specially crafted PDF file or JBIG2 image could lead to a crash or the > execution of arbitrary code. This is similar to the vulnerability > described by CVE-2022-38171 in Xpdf. > - Drop patch (already in version) > https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:52:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:52:54 +0200 Subject: [Buildroot] [git commit] package/imagemagick: security bump to version 7.1.0-51 Message-ID: <20221026085456.37545870E5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c5b1a0b34a02759ab4ac3a28b01fe50c1b9d2ff2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-3213: A heap buffer overflow issue was found in ImageMagick. When an application processes a malformed TIFF file, it could lead to undefined behavior or a crash causing a denial of service. https://github.com/ImageMagick/Website/blob/main/ChangeLog.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/imagemagick/imagemagick.hash | 2 +- package/imagemagick/imagemagick.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/imagemagick/imagemagick.hash b/package/imagemagick/imagemagick.hash index ff0f3e26c6..8988dad5da 100644 --- a/package/imagemagick/imagemagick.hash +++ b/package/imagemagick/imagemagick.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3df6ca6dff15a4e8a20b4593c60285a59e38890440494d91a344e5c0e2bb3eec imagemagick-7.1.0-45.tar.gz +sha256 4333ef2fe63f2510988af82b726f5b1919ebd54037ea6674566c69fcceb67e11 imagemagick-7.1.0-51.tar.gz sha256 8cceeb67d4e783cb63075c7311fdb990fa0369ee80fbd0f481064cd02386ca2d LICENSE diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk index 893606ff01..6bdf24c1e8 100644 --- a/package/imagemagick/imagemagick.mk +++ b/package/imagemagick/imagemagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMAGEMAGICK_VERSION = 7.1.0-45 +IMAGEMAGICK_VERSION = 7.1.0-51 IMAGEMAGICK_SITE = $(call github,ImageMagick,ImageMagick,$(IMAGEMAGICK_VERSION)) IMAGEMAGICK_LICENSE = Apache-2.0 IMAGEMAGICK_LICENSE_FILES = LICENSE From peter at korsgaard.com Wed Oct 26 08:53:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:53:58 +0200 Subject: [Buildroot] [git commit] package/poppler: security bump to version 22.10.0 Message-ID: <20221026085456.45DB3870E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd35c0f363c3192d70b111baba14b40370a206d7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an integer overflow in the JBIG2 decoder (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a specially crafted PDF file or JBIG2 image could lead to a crash or the execution of arbitrary code. This is similar to the vulnerability described by CVE-2022-38171 in Xpdf. - Drop patch (already in version) https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...tjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch | 27 ---------------------- package/poppler/poppler.hash | 2 +- package/poppler/poppler.mk | 2 +- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch b/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch deleted file mode 100644 index 40af6a2e00..0000000000 --- a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3ea6bca90d87d3f91556205c4e58ca425c6ac437 Mon Sep 17 00:00:00 2001 -From: Marco Genasci -Date: Sun, 12 Dec 2021 10:23:37 +0100 -Subject: [PATCH] Include setjmp.h when WITH_JPEG=yes and WITH_PNG=no - -[Retrieved from: -https://gitlab.freedesktop.org/poppler/poppler/-/commit/3ea6bca90d87d3f91556205c4e58ca425c6ac437] -Signed-off-by: Fabrice Fontaine ---- - poppler/ImageEmbeddingUtils.cc | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/poppler/ImageEmbeddingUtils.cc b/poppler/ImageEmbeddingUtils.cc -index 5c50f1269..c26b9eb2a 100644 ---- a/poppler/ImageEmbeddingUtils.cc -+++ b/poppler/ImageEmbeddingUtils.cc -@@ -16,6 +16,7 @@ - extern "C" { - # include - } -+# include - #endif - #ifdef ENABLE_LIBPNG - # include --- -GitLab - diff --git a/package/poppler/poppler.hash b/package/poppler/poppler.hash index cf6c537063..93681e04af 100644 --- a/package/poppler/poppler.hash +++ b/package/poppler/poppler.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 acb840c2c1ec07d07e53c57c4b3a1ff3e3ee2d888d44e1e9f2f01aaf16814de7 poppler-21.12.0.tar.xz +sha256 04e40fad924a6de62e63017a6fd4c04696c1f526dedc2ba5ef275cedf646292a poppler-22.10.0.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/poppler/poppler.mk b/package/poppler/poppler.mk index b54262e7c4..02ccf742ac 100644 --- a/package/poppler/poppler.mk +++ b/package/poppler/poppler.mk @@ -4,7 +4,7 @@ # ################################################################################ -POPPLER_VERSION = 21.12.0 +POPPLER_VERSION = 22.10.0 POPPLER_SOURCE = poppler-$(POPPLER_VERSION).tar.xz POPPLER_SITE = https://poppler.freedesktop.org POPPLER_DEPENDENCIES = fontconfig host-pkgconf From peter at korsgaard.com Wed Oct 26 08:52:08 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:52:08 +0200 Subject: [Buildroot] [git commit] package/squid: security bump to version 5.7 Message-ID: <20221026085456.2B8A4870E4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e6c9a95a34eec997168780d9049560f26cfaeb60 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager https://www.openwall.com/lists/oss-security/2022/09/23/1 - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication https://www.openwall.com/lists/oss-security/2022/09/23/2 Signed-off-by: Peter Korsgaard --- package/squid/squid.hash | 8 ++++---- package/squid/squid.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/squid/squid.hash b/package/squid/squid.hash index 22c6db8c70..b00d14011e 100644 --- a/package/squid/squid.hash +++ b/package/squid/squid.hash @@ -1,6 +1,6 @@ -# From http://www.squid-cache.org/Versions/v5/squid-5.6.tar.xz.asc -md5 2f2201a18a0a727ab589d951ebe4f815 squid-5.6.tar.xz -sha1 a01f47b3e9ff06245c894773de30bfd88ab14f65 squid-5.6.tar.xz +# From http://www.squid-cache.org/Versions/v5/squid-5.7.tar.xz.asc +md5 7a3764a3c5833631a779d7827901cda7 squid-5.7.tar.xz +sha1 141e8007d6b1cfee34654127a9ca025125b37b58 squid-5.7.tar.xz # Locally calculated -sha256 38d27338a347597ce0e93d0c3be6e5f66b6750417c474ca87ee0d61bb6d148db squid-5.6.tar.xz +sha256 6b0753aaba4c9c4efd333e67124caecf7ad6cc2d38581f19d2f0321f5b7ecd81 squid-5.7.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squid/squid.mk b/package/squid/squid.mk index 86a0c714c6..355af0b902 100644 --- a/package/squid/squid.mk +++ b/package/squid/squid.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUID_VERSION = 5.6 +SQUID_VERSION = 5.7 SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz SQUID_SITE = http://www.squid-cache.org/Versions/v5 SQUID_LICENSE = GPL-2.0+ From peter at korsgaard.com Wed Oct 26 08:55:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:55:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/acpid: bump to version 2.0.34 In-Reply-To: <20221019215201.21248-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 23:52:01 +0200") References: <20221019215201.21248-1-fontaine.fabrice@gmail.com> Message-ID: <87pmefyner.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop second patch (source code was merged with > https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 > and moved with > https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) > https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:55:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:55:11 +0200 Subject: [Buildroot] [git commit] package/acpid: bump to version 2.0.34 Message-ID: <20221026085650.F0545870EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7983d366849527f7de3478e7dcda7cc1a0ba2e1c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop second patch (source code was merged with https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 and moved with https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/acpid/0002-add-missing-defines.patch | 40 ---------------------------- package/acpid/acpid.hash | 6 ++--- package/acpid/acpid.mk | 2 +- 3 files changed, 4 insertions(+), 44 deletions(-) diff --git a/package/acpid/0002-add-missing-defines.patch b/package/acpid/0002-add-missing-defines.patch deleted file mode 100644 index a85315911f..0000000000 --- a/package/acpid/0002-add-missing-defines.patch +++ /dev/null @@ -1,40 +0,0 @@ -Add missing MSG_CMSG_CLOEXEC - -Unpatched uClibc toolchains, even using the latest 0.9.33.2, do not -have the MSG_CMSG_CLOEXEC definition. Even though the Buildroot -internal toolchain backend has a uClibc patch to provide it, it -doesn't apply to external toolchains. This patch provides the -definition of MSG_CMSG_CLOEXEC. - -Signed-off-by: Thomas Petazzoni - -Index: b/libnetlink.h -=================================================================== ---- a/libnetlink.h -+++ b/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; -Index: b/kacpimon/libnetlink.h -=================================================================== ---- a/kacpimon/libnetlink.h -+++ b/kacpimon/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; diff --git a/package/acpid/acpid.hash b/package/acpid/acpid.hash index d5e5bcc14b..8da0101264 100644 --- a/package/acpid/acpid.hash +++ b/package/acpid/acpid.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/acpid2/files/ -md5 b2f2ca633b30ae893c47981fa4d3b258 acpid-2.0.33.tar.xz -sha1 b3e06c3f2213db8ee1a9024cf372fb30e2fab637 acpid-2.0.33.tar.xz +md5 988c2e3fd5ba0ea4492d3ba7273af295 acpid-2.0.34.tar.xz +sha1 9322112027e4aa5a8d1b97ec64ef1d150ff0f4fc acpid-2.0.34.tar.xz # Locally computed -sha256 0856f71b3eb34a1b663d0a8e6363dfcbc519e63d847330498898658e2972dbe8 acpid-2.0.33.tar.xz +sha256 2d095c8cfcbc847caec746d62cdc8d0bff1ec1bc72ef7c674c721e04da6ab333 acpid-2.0.34.tar.xz sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/acpid/acpid.mk b/package/acpid/acpid.mk index 5d5138baa3..4bd93068ad 100644 --- a/package/acpid/acpid.mk +++ b/package/acpid/acpid.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPID_VERSION = 2.0.33 +ACPID_VERSION = 2.0.34 ACPID_SOURCE = acpid-$(ACPID_VERSION).tar.xz ACPID_SITE = http://downloads.sourceforge.net/project/acpid2 ACPID_LICENSE = GPL-2.0+ From arnout at mind.be Wed Oct 26 09:49:59 2022 From: arnout at mind.be (Arnout Vandecappelle) Date: Wed, 26 Oct 2022 11:49:59 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: On 25/10/2022 22:13, Thomas Petazzoni via buildroot wrote: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 > > Signed-off-by: Thomas Petazzoni Acked-by: Arnout Vandecappelle (Essensium/Mind) Regards, Arnout > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > > diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..8614537794 > --- /dev/null > +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 034e15d9985..3ff87812036 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index f58e7771e1c..71bd717c233 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3114,7 +3114,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + > diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..4e93f6ab96 > --- /dev/null > +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 5b23a8b640d..404b420f302 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index 066bef99162..b7ad6982e96 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3154,7 +3154,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + > diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..8b6be49e68 > --- /dev/null > +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 034e15d9985..3ff87812036 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index f58e7771e1c..71bd717c233 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3114,7 +3114,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + From thomas.petazzoni at bootlin.com Wed Oct 26 11:35:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:35:59 +0200 Subject: [Buildroot] [git commit] package/gcc: add patch to fix glibc header conflict Message-ID: <20221026113607.39DA1870FE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4ed7d51d1896144caecfd40cf760cf13bbdb9c9d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This commit backports the patch "fixinc: don't "fix" machine names in __has_include(...)" from upstream GCC, which is needed to resolve a header conflict between glibc headers and kernel headers, which has appeared since we bumped glibc to version 2.36 in commit 80c8c15c8534a24382b900a07082a289a368f736. The problem comes from the "fixinc" logic used by gcc to fixup some headers files, generated inside an include-fixed/ folder. This logic ended up replacing "linux/mount.h" by "__linux__/mount.h" in __has_include() invocation, like this: #ifdef __has_include # if __has_include ("__linux__/mount.h") # include "linux/mount.h" # endif #endif in build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With this fix in place, this "include-fixed" header is no longer generated, avoiding the problem. This issue was visible in two different ways in glibc configurations: - As a build failure during the gcc build itself, for architectures that support libsanitizer, as libsanitizer includes mount.h, and would therefore encounter the header conflict. - As a build failure during another user-space package (such as sysvinit for example), on architectures when libsanitizer isn't used, and therefore for which the gcc build was successful, but the header conflict shows up when building some "random" user-space package. The problem is already fixed in GCC 12.2.0, so no patch is required. The problem did not exist back in GCC 8.4.0, so this version does not need patching. Consequently, the patch is only needed for GCC 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. Fixes: (gcc build issue, on architecture that supports libsanitizer) http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ (sysvinit build issue, on architecture that does not support libsanitizer) http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ (crun) http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ (libarchive) http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. Fixes: https://bugs.busybox.net/show_bug.cgi?id=15021 Signed-off-by: Thomas Petazzoni Reviewed-by: Romain Naour Acked-by: Arnout Vandecappelle (Essensium/Mind) Signed-off-by: Thomas Petazzoni --- ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ 3 files changed, 372 insertions(+) diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8614537794 --- /dev/null +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..4e93f6ab96 --- /dev/null +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 5b23a8b640d..404b420f302 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index 066bef99162..b7ad6982e96 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3154,7 +3154,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8b6be49e68 --- /dev/null +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + From thomas.petazzoni at bootlin.com Wed Oct 26 11:36:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:36:26 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: <20221026133626.45a9cdb7@windsurf> On Tue, 25 Oct 2022 22:13:59 +0200 Thomas Petazzoni via buildroot wrote: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 > > Signed-off-by: Thomas Petazzoni > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 11:48:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:48:45 +0200 Subject: [Buildroot] [git commit] package/libcodec2: fix build without C++ Message-ID: <20221026114856.B683C87106@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2a7f501bf3e31ca47e57143770684ce234d705a7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure without C++ raised since bump to version 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): The C++ compiler "/usr/bin/clang++" is not able to compile a simple test program. Fixes: - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) diff --git a/package/libcodec2/0001-update-cmake.patch b/package/libcodec2/0001-update-cmake.patch new file mode 100644 index 0000000000..e983800e27 --- /dev/null +++ b/package/libcodec2/0001-update-cmake.patch @@ -0,0 +1,301 @@ +From 812d69af486e608a10380ed5817b03d08c6e786a Mon Sep 17 00:00:00 2001 +From: "A. Maitland Bottoms" +Date: Sun, 17 Jul 2022 17:04:44 -0400 +Subject: [PATCH] update cmake + +Some minor refactoring of Codec2 build to better use CMake +features to improve readability ans maintainability. + +[Retrieved from: +https://github.com/drowe67/codec2/commit/812d69af486e608a10380ed5817b03d08c6e786a] +Signed-off-by: Fabrice Fontaine +--- + CMakeLists.txt | 48 +++++--------------------- + src/CMakeLists.txt | 84 ++++++++++++++++++++++++---------------------- + 2 files changed, 53 insertions(+), 79 deletions(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 54ac1f4f4..998af5ddf 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -5,19 +5,13 @@ + # Please report questions, comments, problems, or patches to the freetel + # mailing list: https://lists.sourceforge.net/lists/listinfo/freetel-codec2 + # +-set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") +- +-project(codec2) +- +-cmake_minimum_required(VERSION 3.0) +- +-# Set policies here, probably should move to cmake dir. +-if(POLICY CMP0075) +- cmake_policy(SET CMP0075 NEW) +-endif() +-if(POLICY CMP0079) +- cmake_policy(SET CMP0079 NEW) +-endif() ++cmake_minimum_required(VERSION 3.13) ++project(CODEC2 ++ VERSION 1.0.5 ++ DESCRIPTION "Next-Generation Digital Voice for Two-Way Radio" ++ HOMEPAGE_URL "https://www.rowetel.com/codec2.html" ++ LANGUAGES C ++ ) + + include(GNUInstallDirs) + mark_as_advanced(CLEAR +@@ -39,23 +33,6 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + "separate build directory and run cmake from there.") + endif("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + +-# +-# Set project version information. This should probably be done via external +-# file at some point. +-# +-set(CODEC2_VERSION_MAJOR 1) +-set(CODEC2_VERSION_MINOR 0) +-# Set to patch level if needed, otherwise leave FALSE. +-# Must be positive (non-zero) if set, since 0 == FALSE in CMake. +-set(CODEC2_VERSION_PATCH 5) +-set(CODEC2_VERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-# Patch level version bumps should not change API/ABI. +-set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-if(CODEC2_VERSION_PATCH) +- set(CODEC2_VERSION "${CODEC2_VERSION}.${CODEC2_VERSION_PATCH}") +-endif() +-message(STATUS "codec2 version: ${CODEC2_VERSION}") +- + # Set default build type + if(NOT CMAKE_BUILD_TYPE) + set(CMAKE_BUILD_TYPE "Debug") +@@ -65,6 +42,7 @@ endif() + if(BUILD_OSX_UNIVERSAL) + set(CMAKE_OSX_ARCHITECTURES "x86_64;arm64") + endif(BUILD_OSX_UNIVERSAL) ++set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") + + # + # Find the git hash if this is a working copy. +@@ -190,10 +168,6 @@ if (_GNU_SOURCE) + add_definitions(-D_GNU_SOURCE=1) + endif() + +-if(UNIX) +- set(CMAKE_REQUIRED_LIBRARIES m) +-endif() +- + check_symbol_exists(floor math.h HAVE_FLOOR) + check_symbol_exists(ceil math.h HAVE_CEIL) + check_symbol_exists(pow math.h HAVE_POW) +@@ -288,11 +262,7 @@ else() + endif() + + # Return the date (yyyy-mm-dd) +-macro(DATE RESULT) +- execute_process(COMMAND "date" "+%Y%m%d" OUTPUT_VARIABLE ${RESULT}) +-endmacro() +-DATE(DATE_RESULT) +-string(REGEX REPLACE "\n$" "" DATE_RESULT "${DATE_RESULT}") ++string(TIMESTAMP DATE_RESULT "%Y-%m-%d" UTC) + message(STATUS "Compilation date = XX${DATE_RESULT}XX") + + set(CPACK_PACKAGE_VERSION_PATCH "${CPACK_PACKAGE_VERSION_PATCH}-${DATE_RESULT}-${FREEDV_HASH}") +diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt +index 642404962..cb0990bc2 100644 +--- a/src/CMakeLists.txt ++++ b/src/CMakeLists.txt +@@ -81,7 +81,7 @@ else(CMAKE_CROSSCOMPILING) + # Build code generator binaries. These do not get installed. + # generate_codebook + add_executable(generate_codebook generate_codebook.c) +- target_link_libraries(generate_codebook m ${CMAKE_REQUIRED_LIBRARIES}) ++ target_link_libraries(generate_codebook m) + # Make native builds available for cross-compiling. + export(TARGETS generate_codebook + FILE ${CMAKE_BINARY_DIR}/ImportExecutables.cmake) +@@ -238,12 +238,16 @@ set(CODEC2_PUBLIC_HEADERS + # + # Setup the codec2 library + # ++# Patch level version bumps should not change API/ABI. ++set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") ++message(STATUS "codec2 version: ${CODEC2_VERSION}") + add_library(codec2 ${CODEC2_SRCS}) + if(UNIX) +- target_link_libraries(codec2 m) ++ target_link_libraries(codec2 PUBLIC m) + endif(UNIX) + if(LPCNET AND lpcnetfreedv_FOUND) +- target_link_libraries(codec2 lpcnetfreedv) ++ target_link_libraries(codec2 PRIVATE lpcnetfreedv) ++ list(APPEND CODEC2_PUBLIC_HEADERS ${CMAKE_SOURCE_DIR}/lpcnet/src/lpcnet_freedv.h) + endif() + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) + set_target_properties(codec2 PROPERTIES +@@ -269,70 +273,70 @@ export(TARGETS codec2 + ) + + add_executable(c2enc c2enc.c) +-target_link_libraries(c2enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2enc codec2) + + add_executable(c2dec c2dec.c) +-target_link_libraries(c2dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2dec codec2) + + add_executable(c2sim c2sim.c sd.c) +-target_link_libraries(c2sim ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2sim codec2) + + add_executable(fdmdv_get_test_bits fdmdv_get_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_get_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_get_test_bits m) + + add_executable(fdmdv_mod fdmdv_mod.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_mod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_mod m) + + add_executable(fdmdv_demod fdmdv_demod.c fdmdv.c kiss_fft.c octave.c modem_stats.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_demod m) + + add_executable(fdmdv_put_test_bits fdmdv_put_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_put_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_put_test_bits m) + + add_executable(fdmdv_channel fdmdv_channel.c) +-target_link_libraries(fdmdv_channel ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fdmdv_channel codec2) + + add_executable(insert_errors insert_errors.c) +-target_link_libraries(insert_errors ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(insert_errors) + + add_executable(freedv_tx freedv_tx.c) +-target_link_libraries(freedv_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_tx codec2) + + add_executable(freedv_rx freedv_rx.c) +-target_link_libraries(freedv_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_rx codec2) + + add_executable(freedv_data_raw_tx freedv_data_raw_tx.c) +-target_link_libraries(freedv_data_raw_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_tx codec2) + + add_executable(freedv_data_raw_rx freedv_data_raw_rx.c octave.c) +-target_link_libraries(freedv_data_raw_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_rx codec2) + + add_executable(freedv_data_tx freedv_data_tx.c) +-target_link_libraries(freedv_data_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_tx codec2) + + add_executable(freedv_data_rx freedv_data_rx.c) +-target_link_libraries(freedv_data_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_rx codec2) + + add_executable(freedv_mixed_tx freedv_mixed_tx.c) +-target_link_libraries(freedv_mixed_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_tx codec2) + + add_executable(freedv_mixed_rx freedv_mixed_rx.c) +-target_link_libraries(freedv_mixed_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_rx codec2) + + add_executable(fsk_mod fsk_mod.c) +-target_link_libraries(fsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_mod codec2) + + add_executable(fsk_mod_ext_vco fsk_mod_ext_vco.c) +-target_link_libraries(fsk_mod_ext_vco m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fsk_mod_ext_vco m) + + add_executable(fsk_demod fsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_demod codec2) + + add_executable(fsk_get_test_bits fsk_get_test_bits.c) + target_link_libraries(fsk_get_test_bits) + + add_executable(fsk_put_test_bits fsk_put_test_bits.c) +-target_link_libraries(fsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_put_test_bits codec2) + + add_executable(framer framer.c) + target_link_libraries(framer) +@@ -341,46 +345,46 @@ add_executable(deframer deframer.c) + target_link_libraries(deframer) + + add_executable(fm_demod fm_demod.c fm.c) +-target_link_libraries(fm_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fm_demod m) + + add_executable(cohpsk_mod cohpsk_mod.c) +-target_link_libraries(cohpsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_mod codec2) + + add_executable(ofdm_get_test_bits ofdm_get_test_bits.c) +-target_link_libraries(ofdm_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_get_test_bits codec2) + + add_executable(ofdm_put_test_bits ofdm_put_test_bits.c) +-target_link_libraries(ofdm_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_put_test_bits codec2) + + add_executable(ofdm_mod ofdm_mod.c) +-target_link_libraries(ofdm_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_mod codec2) + + add_executable(ofdm_demod ofdm_demod.c octave.c) +-target_link_libraries(ofdm_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_demod codec2) + + add_executable(fmfsk_mod fmfsk_mod.c) +-target_link_libraries(fmfsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_mod codec2) + + add_executable(fmfsk_demod fmfsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fmfsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_demod codec2) + + add_executable(vhf_deframe_c2 vhf_deframe_c2.c) +-target_link_libraries(vhf_deframe_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_deframe_c2 codec2) + + add_executable(vhf_frame_c2 vhf_frame_c2.c) +-target_link_libraries(vhf_frame_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_frame_c2 codec2) + + add_executable(cohpsk_demod cohpsk_demod.c octave.c) +-target_link_libraries(cohpsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_demod codec2) + + add_executable(cohpsk_get_test_bits cohpsk_get_test_bits.c) +-target_link_libraries(cohpsk_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_get_test_bits codec2) + + add_executable(cohpsk_put_test_bits cohpsk_put_test_bits.c octave.c) +-target_link_libraries(cohpsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_put_test_bits codec2) + + add_executable(ch ch.c) +-target_link_libraries(ch ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ch codec2) + + add_executable(tollr tollr.c) + +@@ -388,10 +392,10 @@ add_executable(ldpc_noise ldpc_noise.c) + target_link_libraries(ldpc_noise m) + + add_executable(ldpc_enc ldpc_enc.c) +-target_link_libraries(ldpc_enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_enc codec2) + + add_executable(ldpc_dec ldpc_dec.c) +-target_link_libraries(ldpc_dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_dec codec2) + + install(TARGETS codec2 EXPORT codec2-config + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT lib From thomas.petazzoni at bootlin.com Wed Oct 26 11:49:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:49:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: fix build without C++ In-Reply-To: <20221025221308.352026-1-fontaine.fabrice@gmail.com> References: <20221025221308.352026-1-fontaine.fabrice@gmail.com> Message-ID: <20221026134916.666f0299@windsurf> On Wed, 26 Oct 2022 00:13:08 +0200 Fabrice Fontaine wrote: > Fix the following build failure without C++ raised since bump to version > 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: > > CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): > The C++ compiler > > "/usr/bin/clang++" > > is not able to compile a simple test program. > > Fixes: > - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 > > Signed-off-by: Fabrice Fontaine > --- > package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++ > 1 file changed, 301 insertions(+) > create mode 100644 package/libcodec2/0001-update-cmake.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 11:57:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:57:59 +0200 Subject: [Buildroot] [git commit] package/file: fix uclibc build Message-ID: <20221026115810.7AC268710A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d69752c7582a0b1dd14d05f46fa7a22b2bcfb530 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following uclibc build failure raised since bump to version 5.43 in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: file.c: In function 'fname_print': file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given 605 | putc(c); | ^ Fixes: - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...src-file.c-fix-build-without-wide-support.patch | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/package/file/0001-src-file.c-fix-build-without-wide-support.patch b/package/file/0001-src-file.c-fix-build-without-wide-support.patch new file mode 100644 index 0000000000..29be9fa2cd --- /dev/null +++ b/package/file/0001-src-file.c-fix-build-without-wide-support.patch @@ -0,0 +1,39 @@ +From f2ab09d0e1388657f6b7e62bacc383ebea91f5b9 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Wed, 26 Oct 2022 00:23:32 +0200 +Subject: [PATCH] src/file.c: fix build without wide support + +Fix the following build failure without wide support (e.g. on uclibc) +raised since version 5.43 and +https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: + +file.c: In function 'fname_print': +file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given + 605 | putc(c); + | ^ + +Fixes: + - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 + +Signed-off-by: Fabrice Fontaine +[Upstream status: https://bugs.astron.com/view.php?id=398] +--- + src/file.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/file.c b/src/file.c +index f5f46524..1c23defc 100644 +--- a/src/file.c ++++ b/src/file.c +@@ -615,7 +615,7 @@ fname_print(const char *inname) + for (i = 0; i < n; i++) { + unsigned char c = CAST(unsigned char, inname[i]); + if (isprint(c)) { +- putc(c); ++ putc(c, stdout); + continue; + } + file_octal(c); +-- +2.35.1 + From thomas.petazzoni at bootlin.com Wed Oct 26 11:58:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:58:14 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: fix uclibc build In-Reply-To: <20221025223804.583594-1-fontaine.fabrice@gmail.com> References: <20221025223804.583594-1-fontaine.fabrice@gmail.com> Message-ID: <20221026135814.1272a014@windsurf> On Wed, 26 Oct 2022 00:38:04 +0200 Fabrice Fontaine wrote: > Fix the following uclibc build failure raised since bump to version 5.43 > in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and > https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: > > file.c: In function 'fname_print': > file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given > 605 | putc(c); > | ^ > > Fixes: > - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 > > Signed-off-by: Fabrice Fontaine > --- > ...ile.c-fix-build-without-wide-support.patch | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 package/file/0001-src-file.c-fix-build-without-wide-support.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 12:58:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 14:58:35 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink Message-ID: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> The musl Makefile installs the dynamic loader as a symlink to libc.so with the following rule: $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so $(INSTALL) -D -l $(libdir)/libc.so $@ || true While it works, the drawback is that ld-musl-.so ends up being a symlink to /lib/libc.so. While it works on the target, it means we have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as /lib/libc.so doesn't make sense on the build machine. This generally doesn't cause any problem *except* when we tell Qemu to use $(STAGING_DIR) as the library directory when running target programs through the Qemu user emulation mode. This is for example node inside the NodeJS build. Due to this broken symlink, Qemu can't find libc.so that is pointed to be the dynamic loader symlink causing this build error: qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory Since this is not really a bug in the musl build system, we address this issue by overriding the symlink to be a relative path. The dynamic loader is always installed in /lib, and libc.so is also always installed in /lib because we pass libdir=/lib when configuring musl. So we can simply have a ld-musl* -> libc.so symbolic link. We use ld-musl* as a wildcard so that we don't need to have extra logic to determine the exact name of the dynamic loader symlink, and simply override the one that exists. Fixes: http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ https://bugs.busybox.net/show_bug.cgi?id=15061 Cc: hello.skyclo at gmail.com Signed-off-by: Thomas Petazzoni --- package/musl/musl.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/musl/musl.mk b/package/musl/musl.mk index 44c79da6f7..30c3c2fbc0 100644 --- a/package/musl/musl.mk +++ b/package/musl/musl.mk @@ -60,12 +60,14 @@ endef define MUSL_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* endef define MUSL_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(TARGET_DIR) install-libs $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* endef $(eval $(generic-package)) -- 2.37.3 From bugzilla at busybox.net Wed Oct 26 12:59:47 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Wed, 26 Oct 2022 12:59:47 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 --- Comment #2 from Thomas Petazzoni --- I submitted a fix for this issue at https://patchwork.ozlabs.org/project/buildroot/patch/20221026125836.3910730-1-thomas.petazzoni at bootlin.com/ -- You are receiving this mail because: You are on the CC list for the bug. From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:27 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:27 +0200 Subject: [Buildroot] [PATCH 0/7] Disable packages with CONFIG_WIRELESS on s390x Message-ID: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Linux s390x doesn't support CONFIG_WIRELESS so this patchset disable all packages with Linux CONFIG_WIRELESS for s390x architecture. Giulio Benetti (7): package/rtl8189es: disable package for s390x architecture package/rtl8189fs: disable package for s390x architecture package/rtl8723bu: disable package for s390x architecture package/rtl8723ds: disable package for s390x architecture package/rtl8812au-aircrack-ng: disable package for s390x architecture package/rtl8821au: disable package for s390x architecture package/wilc-driver: disable package for s390x architecture package/rtl8189es/Config.in | 2 ++ package/rtl8189fs/Config.in | 2 ++ package/rtl8723bu/Config.in | 2 ++ package/rtl8723ds/Config.in | 2 ++ package/rtl8812au-aircrack-ng/Config.in | 2 ++ package/rtl8821au/Config.in | 2 ++ package/wilc-driver/Config.in | 2 ++ 7 files changed, 14 insertions(+) -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:29 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:29 +0200 Subject: [Buildroot] [PATCH 2/7] package/rtl8189fs: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-3-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8189fs/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189fs/Config.in b/package/rtl8189fs/Config.in index ae69b79235..78eeed1a4f 100644 --- a/package/rtl8189fs/Config.in +++ b/package/rtl8189fs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189FS bool "rtl8189fs" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189fs. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189FS https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189fs needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:28 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:28 +0200 Subject: [Buildroot] [PATCH 1/7] package/rtl8189es: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-2-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Fixes: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ Signed-off-by: Giulio Benetti --- package/rtl8189es/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189es/Config.in b/package/rtl8189es/Config.in index 2e3474e5e1..11dd225436 100644 --- a/package/rtl8189es/Config.in +++ b/package/rtl8189es/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189ES bool "rtl8189es" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189es. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189ES https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189es needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:30 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:30 +0200 Subject: [Buildroot] [PATCH 3/7] package/rtl8723bu: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-4-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8723bu/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723bu/Config.in b/package/rtl8723bu/Config.in index 266a794a7d..7c624fc4d4 100644 --- a/package/rtl8723bu/Config.in +++ b/package/rtl8723bu/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723BU bool "rtl8723bu" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bu wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723BU https://github.com/lwfinger/rtl8723bu comment "rtl8723bu needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:31 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:31 +0200 Subject: [Buildroot] [PATCH 4/7] package/rtl8723ds: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-5-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8723ds/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723ds/Config.in b/package/rtl8723ds/Config.in index ef7dd39a68..e5123a2aae 100644 --- a/package/rtl8723ds/Config.in +++ b/package/rtl8723ds/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723DS bool "rtl8723ds" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bs wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723DS https://github.com/lwfinger/rtl8723ds comment "rtl8723ds needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:32 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:32 +0200 Subject: [Buildroot] [PATCH 5/7] package/rtl8812au-aircrack-ng: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-6-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8812au-aircrack-ng/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8812au-aircrack-ng/Config.in b/package/rtl8812au-aircrack-ng/Config.in index 70cbd15221..d903ab2b3f 100644 --- a/package/rtl8812au-aircrack-ng/Config.in +++ b/package/rtl8812au-aircrack-ng/Config.in @@ -1,8 +1,10 @@ comment "rtl8812au-aircrack-ng needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8812AU_AIRCRACK_NG bool "rtl8812au-aircrack-ng" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8812au wifi driver (aircrack-ng repository) -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:33 +0200 Subject: [Buildroot] [PATCH 6/7] package/rtl8821au: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-7-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8821au/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8821au/Config.in b/package/rtl8821au/Config.in index 87c191b22a..3d7bbf643d 100644 --- a/package/rtl8821au/Config.in +++ b/package/rtl8821au/Config.in @@ -1,8 +1,10 @@ comment "rtl8821au needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8821AU bool "rtl8821au" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8821au wifi driver -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:34 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-8-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/wilc-driver/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in index 7ed062bb66..7f970bd38b 100644 --- a/package/wilc-driver/Config.in +++ b/package/wilc-driver/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_WILC_DRIVER bool "wilc kernel module" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help External kernel module for WILC1000/3000 devices. @@ -59,4 +60,5 @@ endif endif comment "wilc kernel module needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From yann.morin at orange.com Wed Oct 26 13:31:22 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Wed, 26 Oct 2022 15:31:22 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> Message-ID: <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> Thomas, All, On 2022-10-26 14:58 +0200, Thomas Petazzoni via buildroot spake thusly: > The musl Makefile installs the dynamic loader as a symlink to libc.so > with the following rule: > > $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so > $(INSTALL) -D -l $(libdir)/libc.so $@ || true > > While it works, the drawback is that ld-musl-.so ends up being a > symlink to /lib/libc.so. While it works on the target, it means we > have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as > /lib/libc.so doesn't make sense on the build machine. [--SNIP--] > diff --git a/package/musl/musl.mk b/package/musl/musl.mk > index 44c79da6f7..30c3c2fbc0 100644 > --- a/package/musl/musl.mk > +++ b/package/musl/musl.mk > @@ -60,12 +60,14 @@ endef > define MUSL_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers > + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* > endef > > define MUSL_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(TARGET_DIR) install-libs > $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) > + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* > endef What about external toolchains? Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From thomas.petazzoni at bootlin.com Wed Oct 26 13:49:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 15:49:02 +0200 Subject: [Buildroot] [git commit] package/glibc: fix x86_64 builds with -Os Message-ID: <20221026134929.0743787113@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e548b7642ac14f2440427cb6ae11242680d3d935 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport upstream commit for x86_64 builds with -Os reported by [1]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 http://autobuild.buildroot.net/results/5b442f95587ddc65a995bbd9e310c88a66c55b1f Signed-off-by: Romain Naour Reviewed-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch new file mode 100644 index 0000000000..4470324f1c --- /dev/null +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch @@ -0,0 +1,48 @@ +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 +From: Adhemerval Zanella Netto +Date: Wed, 21 Sep 2022 10:51:08 -0300 +Subject: [PATCH] x86: Fix -Os build (BZ #29576) + +The compiler might transform __stpcpy calls (which are routed to +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy +multiarch implementation does not build any working symbol due +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). + +Checked on x86_64-linux-gnu. +Reviewed-by: Carlos O'Donell +Tested-by: Carlos O'Donell + +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) +Signed-off-by: Romain Naour +--- + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S + +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S +new file mode 100644 +index 0000000000..19439c553d +--- /dev/null ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S +@@ -0,0 +1,18 @@ ++/* Copyright (C) 2022 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ . */ ++ ++#include "../strcpy.S" +-- +2.34.3 + From thomas.petazzoni at bootlin.com Wed Oct 26 13:51:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 15:51:28 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <20221009153521.12444-1-romain.naour@gmail.com> References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: <20221026155128.104059e2@windsurf> On Sun, 9 Oct 2022 17:35:21 +0200 Romain Naour wrote: > Backport upstream commit for x86_64 builds with -Os reported by [1]. > > [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 > > Signed-off-by: Romain Naour > --- > .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From kris at embeddedTS.com Wed Oct 26 17:32:28 2022 From: kris at embeddedTS.com (Kris Bahnsen) Date: Wed, 26 Oct 2022 10:32:28 -0700 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <20221026132634.999254-8-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> <20221026132634.999254-8-giulio.benetti@benettiengineering.com> Message-ID: <1666805548.3174.1.camel@embeddedTS.com> On Wed, 2022-10-26 at 15:26 +0200, Giulio Benetti wrote: > s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this > package for this architecture. > > Signed-off-by: Giulio Benetti > --- > package/wilc-driver/Config.in | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in > index 7ed062bb66..7f970bd38b 100644 > --- a/package/wilc-driver/Config.in > +++ b/package/wilc-driver/Config.in > @@ -1,5 +1,6 @@ > config BR2_PACKAGE_WILC_DRIVER > bool "wilc kernel module" > + depends on !BR2_s390x > depends on BR2_LINUX_KERNEL > help > External kernel module for WILC1000/3000 devices. > @@ -59,4 +60,5 @@ endif > endif > > comment "wilc kernel module needs a Linux kernel to be built" > + depends on !BR2_s390x > depends on !BR2_LINUX_KERNEL I don't know much on the s390x arch, nor Buildroot paradigms for disabling packages per-architecture, however the change itself looks good to me. Reviewed-by: Kris Bahnsen From giulio.benetti at benettiengineering.com Wed Oct 26 17:53:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 19:53:33 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <1666805548.3174.1.camel@embeddedTS.com> References: <1666805548.3174.1.camel@embeddedTS.com> Message-ID: <67DEC0A4-EAEE-42F7-A07E-9265B1897153@benettiengineering.com> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: favicon.ico Type: image/vnd.microsoft.icon Size: 766 bytes Desc: not available URL: From thomas.petazzoni at bootlin.com Wed Oct 26 17:54:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 19:54:29 +0200 Subject: [Buildroot] [PATCH] package/binutils: prevent selecting 2.37 for AVX512 systems Message-ID: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> Support for the AVX512FP16 instructions was added in binutils 2.38. See the binutils 2.38 releases notes [0] that state: X86: [...] * Add support for Intel AVX512_FP16 instructions. [0] https://sourceware.org/pipermail/binutils/2022-February/119721.html It turns out that when building GCC 12.x, some of these AVX512FP16 instructions are now used, and therefore when binutils < 2.38 is used, the build fails as the assembler does not recognize those instructions: /tmp/ccChzL2g.s: Assembler messages: /tmp/ccChzL2g.s:20: Error: no such instruction: `vmovw 24(%esp),%xmm2' /tmp/ccChzL2g.s:21: Error: no such instruction: `vmovw 28(%esp),%xmm3' /tmp/ccChzL2g.s:22: Error: no such instruction: `vmovw 32(%esp),%xmm4' /tmp/ccChzL2g.s:23: Error: no such instruction: `vmovw 36(%esp),%xmm5' /tmp/ccChzL2g.s:30: Error: no such instruction: `vcvtsh2ss %xmm2,%xmm6,%xmm6' /tmp/ccChzL2g.s:36: Error: no such instruction: `vcvtsh2ss %xmm3,%xmm6,%xmm6' /tmp/ccChzL2g.s:42: Error: no such instruction: `vcvtsh2ss %xmm4,%xmm7,%xmm7' /tmp/ccChzL2g.s:48: Error: no such instruction: `vcvtsh2ss %xmm5,%xmm1,%xmm1' /tmp/ccChzL2g.s:80: Error: no such instruction: `vcvtss2sh (%esp),%xmm1,%xmm1' /tmp/ccChzL2g.s:96: Error: no such instruction: `vcvtss2sh (%esp),%xmm0,%xmm0' /tmp/ccChzL2g.s:100: Error: no such instruction: `vucomish %xmm1,%xmm1' /tmp/ccChzL2g.s:103: Error: no such instruction: `vucomish %xmm0,%xmm0' /tmp/ccChzL2g.s:122: Error: no such instruction: `vucomish %xmm2,%xmm2' The same issue does not occur with GCC 11.x, but nothing prevents other packages than GCC to use those instructions, so the problem really lies on the binutils side missing the support for those instructions. Also, in Buildroot, we do not distinguish AVX512 in general from AVX512FP16 specifically, so our only option is to make binutils 2.37 unavailable for AVX512 systems even if some of them perhaps don't support AVX512FP16 anyway. This seems like a reasonable trade-off, as binutils 2.38 is anyway already the default in Buildroot, and AVX512-capable systems are fairly recent, and therefore using a recent binutils version should not be a problem on these platforms. Fixes: http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ Signed-off-by: Thomas Petazzoni --- package/binutils/Config.in.host | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host index 51802db043..5dd2af2f9c 100644 --- a/package/binutils/Config.in.host +++ b/package/binutils/Config.in.host @@ -14,6 +14,9 @@ choice config BR2_BINUTILS_VERSION_2_37_X bool "binutils 2.37" + # AVX512FP16 instructions were not supported before binutils + # 2.38 + depends on !BR2_X86_CPU_HAS_AVX512 config BR2_BINUTILS_VERSION_2_38_X bool "binutils 2.38" -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 17:57:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 19:57:05 +0200 Subject: [Buildroot] [PATCH] package/nodejs: drop support for the MIPS architecture Message-ID: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> The build of NodeJS fails on mipsel due to an issue in the V8 code: ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous 4106 | Operand(static_cast(0))); There is apparently a lack of maintenance of the MIPS port of V8, as is discussed in the Github issue at https://github.com/nodejs/node/issues/26179. Until this get improved/fixed, our best option is to drop support for MIPS in our NodeJS package. Fixes: http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ Signed-off-by: Thomas Petazzoni --- package/nodejs/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 5375dfeacd..1489306be0 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -2,7 +2,6 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS bool # On ARM, at least ARMv6+ with VFPv2+ is needed default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 && BR2_ARM_CPU_HAS_VFPV2 - default y if BR2_mipsel && !BR2_MIPS_SOFT_FLOAT default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 -- 2.37.3 From giulio.benetti at benettiengineering.com Wed Oct 26 18:11:26 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 20:11:26 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <1666805548.3174.1.camel@embeddedTS.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> <20221026132634.999254-8-giulio.benetti@benettiengineering.com> <1666805548.3174.1.camel@embeddedTS.com> Message-ID: <15ee7ca2-eb3b-3a5a-549a-de372f7c9810@benettiengineering.com> Hi Kris, All, sorry for my previous HTML e-mail, On 26/10/22 19:32, Kris Bahnsen via buildroot wrote: > On Wed, 2022-10-26 at 15:26 +0200, Giulio Benetti wrote: >> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this >> package for this architecture. >> >> Signed-off-by: Giulio Benetti >> --- >> package/wilc-driver/Config.in | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in >> index 7ed062bb66..7f970bd38b 100644 >> --- a/package/wilc-driver/Config.in >> +++ b/package/wilc-driver/Config.in >> @@ -1,5 +1,6 @@ >> config BR2_PACKAGE_WILC_DRIVER >> bool "wilc kernel module" >> + depends on !BR2_s390x >> depends on BR2_LINUX_KERNEL >> help >> External kernel module for WILC1000/3000 devices. >> @@ -59,4 +60,5 @@ endif >> endif >> >> comment "wilc kernel module needs a Linux kernel to be built" >> + depends on !BR2_s390x >> depends on !BR2_LINUX_KERNEL > > I don't know much on the s390x arch, nor Buildroot paradigms for disabling packages > per-architecture, however the change itself looks good to me. If you check here: https://elixir.bootlin.com/linux/latest/source/net/Kconfig#L371 You will see that Linux Wireless subsystem is activated only when s390x is not enabled. This also created a build failure with another rtlxxxx driver due to that: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ This is why I came in with this patchset that prevents that kind of build failure. > Reviewed-by: Kris Bahnsen Thank you Best regards -- Giulio Benetti Benetti Engineering sas From thomas.petazzoni at bootlin.com Wed Oct 26 18:34:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:34:26 +0200 Subject: [Buildroot] [PATCH 1/2] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE Message-ID: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> In the internal toolchain backend, we have a choice..endchoice block to allow the user to select the C library, between glibc, uClibc and musl. However, there are situations were no C library at all is supported. In this case, the choice does not appear, and does not allow to see the Config.in comments that are within the choice..endchoice block and that may explain why no C library is available. For example, on RISC-V 32-bit, the only C library supported is glibc, and the minimum kernel header version required by glibc on this architecture is 5.4.0. In a future commit, we are going to add this dependency on glibc (to fix build issues on configurations that have headers < 5.4.0). But since glibc is the only supported C library on RISC-V 32-bit, it means that the choice..endchoice for the C library contains no entry, preventing from seeing the Config.in comment. To address this issue, this commit adds a "dummy" BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the choice..endchoice only when no C library is available. Thanks to this, the choice..endchoice is never empty, and the Config.in comments can be seen. If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the build will anyway abort early because package/Makefile.in has a check to verify that a C library is selected, and aborts the build if not. Some could say that the problem should be resolved by instead preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that is difficult to do as the user can choose a custom header version, or simply specific that (s)he wants to use the headers of the kernel being built. In those situations, it's difficult to prevent selecting headers < 5.4.0. Signed-off-by: Thomas Petazzoni --- toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 6d55f87435..26d731d976 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL https://www.musl-libc.org/ +config BR2_TOOLCHAIN_BUILDROOT_NONE + bool "none" + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ + !BR2_PACKAGE_GLIBC_SUPPORTS && \ + !BR2_PACKAGE_MUSL_SUPPORTS + help + This option is visible if no C library is available for the + currently selected configuration. If you select this option, + the build will refuse to start as Buildroot needs a C + library to build a toolchain. Change your configuration + settings to make sure one of the C libraries is selected. + endchoice config BR2_TOOLCHAIN_BUILDROOT_LIBC -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 18:34:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:34:27 +0200 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> Message-ID: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Since glibc 2.33 (upstream commit 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed to build glibc for RISC-V 32-bit. Indeed sysdeps/unix/sysv/linux/riscv/configure.ac contains: if test $libc_cv_riscv_int_abi = ilp32; then arch_minimum_kernel=5.4.0 fi In order to take into account this dependency, we add the appropriate logic in package/glibc/Config.in and toolchain/toolchain-buildroot/Config.in. This change means that if headers < 5.4.0 are selected, then no C library at all will be available for RISC-V 32-bit, as glibc is the only C library supporting RISC-V 32-bit currently. However, thanks to the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the choice...endchoice for the C library selection will not be empty, allowing the user to see the Config.in comment explaining why glibc can't be selected. Therefore, technically this commit does prevent from creating a configuration with RISC-V 32-bit and headers < 5.4.0, but it will have BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by package/Makefile.in, which aborts the build early on pointing out that the configuration is invalid. Fixes: http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ Signed-off-by: Thomas Petazzoni --- package/glibc/Config.in | 1 + toolchain/toolchain-buildroot/Config.in | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/package/glibc/Config.in b/package/glibc/Config.in index b63f99b0b4..71c50504ac 100644 --- a/package/glibc/Config.in +++ b/package/glibc/Config.in @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 26d731d976..64f7892f98 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" depends on BR2_RISCV_64 depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" + depends on BR2_RISCV_32 + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 + comment "glibc on ARC needs a toolchain w/ headers >= 5.1" depends on BR2_arc depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 18:53:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:53:12 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> Message-ID: <20221026205312.3f729eb8@windsurf> Hello Yann, On Wed, 26 Oct 2022 15:31:22 +0200 wrote: > What about external toolchains? That's a very good question, which I had not looked into, so I did some research. External toolchains are not affected because when we copy the sysroot from the toolchain into STAGING_DIR, we do this: for link in $$(find $(STAGING_DIR) -type l); do \ target=$$(readlink $${link}) ; \ if [ "$${target}" == "$${target$(SHARP_SIGN)/}" ] ; then \ continue ; \ fi ; \ relpath="$(call relpath_prefix,$${target$(SHARP_SIGN)/})" ; \ echo "Fixing symlink $${link} from $${target} to $${relpath}$${target$(SHARP_SIGN)/}" ; \ ln -sf $${relpath}$${target$(SHARP_SIGN)/} $${link} ; \ done ; \ (from toolchain/helpers.mk:copy_toolchain_sysroot) This causes this to happen: >>> toolchain-external-bootlin 2021.11-1 Copying external toolchain sysroot to staging... Fixing symlink /home/thomas/projets/buildroot/output/host/x86_64-buildroot-linux-musl/sysroot/lib/ld-musl-x86_64.so.1 from /lib/libc.so to ../lib/libc.so So in the external toolchain, even if the symlink is broken, it gets fixed when we import the toolchain into STAGING_DIR. (Note: the external toolchain used here is a Bootlin toolchain, produced by Buildroot, but without the musl.mk fix, so it does have the bogus ld-musl-x86-64.so.1 -> /lib/libc.so link, but that gets fixed when we import the toolchain, as described above) Does that this seem like a good enough answer for the external toolchain case? If so, I can submit a v2 with an amended commit log. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Wed Oct 26 19:35:08 2022 From: christian at paral.in (Christian Stewart) Date: Wed, 26 Oct 2022 12:35:08 -0700 Subject: [Buildroot] [PATCH 1/1] package/go: security bump to 1.19.2 Message-ID: <20221026193508.482276-1-christian@paral.in> go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and regexp packages, as well as bug fixes to the compiler, the linker, the runtime, and the go/types package. https://go.dev/doc/devel/release#go1.19 https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved Signed-off-by: Christian Stewart --- package/go/go.hash | 2 +- package/go/go.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/go/go.hash b/package/go/go.hash index 657475adef..f944bd5304 100644 --- a/package/go/go.hash +++ b/package/go/go.hash @@ -1,3 +1,3 @@ # From https://go.dev/dl -sha256 27871baa490f3401414ad793fba49086f6c855b1c584385ed7771e1204c7e179 go1.19.1.src.tar.gz +sha256 2ce930d70a931de660fdaf271d70192793b1b240272645bf0275779f6704df6b go1.19.2.src.tar.gz sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 LICENSE diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..fe4d3a29a9 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -4,7 +4,7 @@ # ################################################################################ -GO_VERSION = 1.19.1 +GO_VERSION = 1.19.2 GO_SITE = https://storage.googleapis.com/golang GO_SOURCE = go$(GO_VERSION).src.tar.gz -- 2.38.1 From thomas.petazzoni at bootlin.com Wed Oct 26 19:36:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:36:05 +0200 Subject: [Buildroot] [PATCH] package/sentry-cli: fix build failure by bumping to 2.8.0 Message-ID: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> For a very long time, host-sentry-cli has been failing to build with: error[E0512]: cannot transmute between types of different sizes, or dependently-sized types --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 | 176 | mem::transmute::(v4); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: source type: `SocketAddrV4` (48 bits) = note: target type: `sockaddr_in` (128 bits) For more information about this error, try `rustc --explain E0512`. error: could not compile `socket2` due to previous error This socket2 create issue has apparently been fixed by upstream commit https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, as it removes/reworks the problematic code. This commit has been part of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 in version 0.3.2. The next version of sentry-cli that has moved to a more recent version of socket2 is 1.61.0, however this one also fails to build with: Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) warning: fields `schemes` and `name` are never read --> src/utils/xcode.rs:41:5 | 39 | pub struct XcodeProjectInfo { | ---------------- fields in this struct 40 | targets: Vec, 41 | schemes: Vec, | ^^^^^^^ 42 | configurations: Vec, 43 | name: String, | ^^^^ | = note: `#[warn(dead_code)]` on by default = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis warning: `sentry-cli` (bin "sentry-cli") generated 1 warning Finished release [optimized] target(s) in 55.05s Installing /home/buildroot/buildroot/output/host/bin/sentry-cli Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) So we just gave up, and went for building the very lastest sentry-cli version, 2.8.0, which apparently builds fine, at least in the configurations that used to previously fail. Yes, such a huge version bump is probably not ideal as a "minimal fix" to backport on our stable branches, but that's probably the best we can do without investing too much effort into this package that is otherwise poorly maintained in Buildroot, as nobody stepped up to address the issue even though it has been failing for months. Fixes: http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ Signed-off-by: Thomas Petazzoni --- package/sentry-cli/sentry-cli.hash | 2 +- package/sentry-cli/sentry-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sentry-cli/sentry-cli.hash b/package/sentry-cli/sentry-cli.hash index 73f818125f..3562199a82 100644 --- a/package/sentry-cli/sentry-cli.hash +++ b/package/sentry-cli/sentry-cli.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 d687336379fd96c4ee73f24bd062d31672bd7453af53311b72977be3c8c78fef sentry-cli-1.59.0.tar.gz +sha256 fa06f9f47782713eef8a4f10b674e2375b9439360ab34b37558ec4b30ec84861 sentry-cli-2.8.0.tar.gz sha256 9503def7b54ceb6e3cd182fd59bc05d3a30d7eae481e65aaba4b495133c83c14 LICENSE diff --git a/package/sentry-cli/sentry-cli.mk b/package/sentry-cli/sentry-cli.mk index 58f5f1e325..15094c2d01 100644 --- a/package/sentry-cli/sentry-cli.mk +++ b/package/sentry-cli/sentry-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -SENTRY_CLI_VERSION = 1.59.0 +SENTRY_CLI_VERSION = 2.8.0 SENTRY_CLI_SITE = $(call github,getsentry,sentry-cli,$(SENTRY_CLI_VERSION)) SENTRY_CLI_LICENSE = BSD-3-clause SENTRY_CLI_LICENSE_FILES = LICENSE -- 2.37.3 From fontaine.fabrice at gmail.com Wed Oct 26 19:36:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 21:36:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/expat: security bump to version 2.5.0 Message-ID: <20221026193658.245255-1-fontaine.fabrice@gmail.com> Expat 2.5.0 has been released earlier today. Most importantly, this release fixes CVE-2022-43680: a heap use-after-free vulnerability after overeager destruction of a shared DTD in function XML_ExternalEntityParserCreate in out-of-memory situations, with expected impact of denial of service or potentially arbitrary code execution. https://blog.hartwork.org/posts/expat-2-5-0-released https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Fabrice Fontaine --- package/expat/expat.hash | 8 ++++---- package/expat/expat.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/expat/expat.hash b/package/expat/expat.hash index 15e64a4dc8..c6c25aa3e0 100644 --- a/package/expat/expat.hash +++ b/package/expat/expat.hash @@ -1,7 +1,7 @@ -# From https://sourceforge.net/projects/expat/files/expat/2.4.9/ -md5 8d7fcf7d02d08bf79d9ae5c21cc72c03 expat-2.4.9.tar.xz -sha1 be91118bc495ce49b04a3fd0f27df2fb5a843e9b expat-2.4.9.tar.xz +# From https://sourceforge.net/projects/expat/files/expat/2.5.0/ +md5 ac6677b6d1b95d209ab697ce8b688704 expat-2.5.0.tar.xz +sha1 5178e13c1e34f4643d5118d5758babfe0e836fe2 expat-2.5.0.tar.xz # Locally calculated -sha256 6e8c0728fe5c7cd3f93a6acce43046c5e4736c7b4b68e032e9350daa0efc0354 expat-2.4.9.tar.xz +sha256 ef2420f0232c087801abf705e89ae65f6257df6b7931d37846a193ef2e8cdcbe expat-2.5.0.tar.xz sha256 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534 COPYING diff --git a/package/expat/expat.mk b/package/expat/expat.mk index 59854d0ee8..6f22024cc0 100644 --- a/package/expat/expat.mk +++ b/package/expat/expat.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXPAT_VERSION = 2.4.9 +EXPAT_VERSION = 2.5.0 EXPAT_SITE = http://downloads.sourceforge.net/project/expat/expat/$(EXPAT_VERSION) EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.xz EXPAT_INSTALL_STAGING = YES -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 26 19:44:01 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 26 Oct 2022 13:44:01 -0600 Subject: [Buildroot] [PATCH 1/1] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca Message-ID: <20221026194401.997459-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/glibc/glibc.hash | 2 +- package/glibc/glibc.mk | 2 +- package/localedef/localedef.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/glibc/glibc.hash b/package/glibc/glibc.hash index f5c0f1b175..16290461ac 100644 --- a/package/glibc/glibc.hash +++ b/package/glibc/glibc.hash @@ -1,5 +1,5 @@ # Locally calculated (fetched from Github) -sha256 596bee874d76bc6c5f62af142c9dd40bcb3625ea26975bbc52e552d40e864e54 glibc-2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3.tar.gz +sha256 51b946f6c8dddd2b0c9902f7792ecf594497da6b0cc8fb9246fa30f108cbb422 glibc-2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca.tar.gz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk index 84122db91f..bb7c9e9a05 100644 --- a/package/glibc/glibc.mk +++ b/package/glibc/glibc.mk @@ -7,7 +7,7 @@ # Generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- # When updating the version, please also update localedef -GLIBC_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +GLIBC_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca # Upstream doesn't officially provide an https download link. # There is one (https://sourceware.org/git/glibc.git) but it's not reliable, # sometimes the connection times out. So use an unofficial github mirror. diff --git a/package/localedef/localedef.mk b/package/localedef/localedef.mk index 987f7e8c65..05db7fa423 100644 --- a/package/localedef/localedef.mk +++ b/package/localedef/localedef.mk @@ -7,7 +7,7 @@ # Use the same VERSION and SITE as target glibc # As in glibc.mk, generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- -LOCALEDEF_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +LOCALEDEF_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca LOCALEDEF_SOURCE = glibc-$(LOCALEDEF_VERSION).tar.gz LOCALEDEF_SITE = $(call github,bminor,glibc,$(LOCALEDEF_VERSION)) HOST_LOCALEDEF_DL_SUBDIR = glibc -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 26 19:50:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:50:06 +0200 Subject: [Buildroot] [git commit] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca Message-ID: <20221026195017.CF7DD87133@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7630d0dde3b6284160bbe16474dad4fdc0b6a4fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/glibc/glibc.hash | 2 +- package/glibc/glibc.mk | 2 +- package/localedef/localedef.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/glibc/glibc.hash b/package/glibc/glibc.hash index f5c0f1b175..16290461ac 100644 --- a/package/glibc/glibc.hash +++ b/package/glibc/glibc.hash @@ -1,5 +1,5 @@ # Locally calculated (fetched from Github) -sha256 596bee874d76bc6c5f62af142c9dd40bcb3625ea26975bbc52e552d40e864e54 glibc-2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3.tar.gz +sha256 51b946f6c8dddd2b0c9902f7792ecf594497da6b0cc8fb9246fa30f108cbb422 glibc-2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca.tar.gz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk index 84122db91f..bb7c9e9a05 100644 --- a/package/glibc/glibc.mk +++ b/package/glibc/glibc.mk @@ -7,7 +7,7 @@ # Generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- # When updating the version, please also update localedef -GLIBC_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +GLIBC_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca # Upstream doesn't officially provide an https download link. # There is one (https://sourceware.org/git/glibc.git) but it's not reliable, # sometimes the connection times out. So use an unofficial github mirror. diff --git a/package/localedef/localedef.mk b/package/localedef/localedef.mk index 987f7e8c65..05db7fa423 100644 --- a/package/localedef/localedef.mk +++ b/package/localedef/localedef.mk @@ -7,7 +7,7 @@ # Use the same VERSION and SITE as target glibc # As in glibc.mk, generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- -LOCALEDEF_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +LOCALEDEF_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca LOCALEDEF_SOURCE = glibc-$(LOCALEDEF_VERSION).tar.gz LOCALEDEF_SITE = $(call github,bminor,glibc,$(LOCALEDEF_VERSION)) HOST_LOCALEDEF_DL_SUBDIR = glibc From thomas.petazzoni at bootlin.com Wed Oct 26 19:49:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:49:56 +0200 Subject: [Buildroot] [git commit] package/expat: security bump to version 2.5.0 Message-ID: <20221026195017.C073687132@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=26ec7c4d029d281fc4f0d61e18fc83b91142d9a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Expat 2.5.0 has been released earlier today. Most importantly, this release fixes CVE-2022-43680: a heap use-after-free vulnerability after overeager destruction of a shared DTD in function XML_ExternalEntityParserCreate in out-of-memory situations, with expected impact of denial of service or potentially arbitrary code execution. https://blog.hartwork.org/posts/expat-2-5-0-released https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/expat/expat.hash | 8 ++++---- package/expat/expat.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/expat/expat.hash b/package/expat/expat.hash index 15e64a4dc8..c6c25aa3e0 100644 --- a/package/expat/expat.hash +++ b/package/expat/expat.hash @@ -1,7 +1,7 @@ -# From https://sourceforge.net/projects/expat/files/expat/2.4.9/ -md5 8d7fcf7d02d08bf79d9ae5c21cc72c03 expat-2.4.9.tar.xz -sha1 be91118bc495ce49b04a3fd0f27df2fb5a843e9b expat-2.4.9.tar.xz +# From https://sourceforge.net/projects/expat/files/expat/2.5.0/ +md5 ac6677b6d1b95d209ab697ce8b688704 expat-2.5.0.tar.xz +sha1 5178e13c1e34f4643d5118d5758babfe0e836fe2 expat-2.5.0.tar.xz # Locally calculated -sha256 6e8c0728fe5c7cd3f93a6acce43046c5e4736c7b4b68e032e9350daa0efc0354 expat-2.4.9.tar.xz +sha256 ef2420f0232c087801abf705e89ae65f6257df6b7931d37846a193ef2e8cdcbe expat-2.5.0.tar.xz sha256 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534 COPYING diff --git a/package/expat/expat.mk b/package/expat/expat.mk index 59854d0ee8..6f22024cc0 100644 --- a/package/expat/expat.mk +++ b/package/expat/expat.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXPAT_VERSION = 2.4.9 +EXPAT_VERSION = 2.5.0 EXPAT_SITE = http://downloads.sourceforge.net/project/expat/expat/$(EXPAT_VERSION) EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.xz EXPAT_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Wed Oct 26 19:49:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:49:53 +0200 Subject: [Buildroot] [git commit] package/go: security bump to 1.19.2 Message-ID: <20221026195017.B082687131@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ba57ca36b90371d35cd1421aec16e63aa3f43dbf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and regexp packages, as well as bug fixes to the compiler, the linker, the runtime, and the go/types package. https://go.dev/doc/devel/release#go1.19 https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- package/go/go.hash | 2 +- package/go/go.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/go/go.hash b/package/go/go.hash index 657475adef..f944bd5304 100644 --- a/package/go/go.hash +++ b/package/go/go.hash @@ -1,3 +1,3 @@ # From https://go.dev/dl -sha256 27871baa490f3401414ad793fba49086f6c855b1c584385ed7771e1204c7e179 go1.19.1.src.tar.gz +sha256 2ce930d70a931de660fdaf271d70192793b1b240272645bf0275779f6704df6b go1.19.2.src.tar.gz sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 LICENSE diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..fe4d3a29a9 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -4,7 +4,7 @@ # ################################################################################ -GO_VERSION = 1.19.1 +GO_VERSION = 1.19.2 GO_SITE = https://storage.googleapis.com/golang GO_SOURCE = go$(GO_VERSION).src.tar.gz From thomas.petazzoni at bootlin.com Wed Oct 26 19:50:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:50:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/go: security bump to 1.19.2 In-Reply-To: <20221026193508.482276-1-christian@paral.in> References: <20221026193508.482276-1-christian@paral.in> Message-ID: <20221026215058.1e623bb4@windsurf> On Wed, 26 Oct 2022 12:35:08 -0700 Christian Stewart via buildroot wrote: > go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and > regexp packages, as well as bug fixes to the compiler, the linker, the runtime, > and the go/types package. > > https://go.dev/doc/devel/release#go1.19 > https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved > > Signed-off-by: Christian Stewart > --- > package/go/go.hash | 2 +- > package/go/go.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/expat: security bump to version 2.5.0 In-Reply-To: <20221026193658.245255-1-fontaine.fabrice@gmail.com> References: <20221026193658.245255-1-fontaine.fabrice@gmail.com> Message-ID: <20221026215104.238043e7@windsurf> On Wed, 26 Oct 2022 21:36:58 +0200 Fabrice Fontaine wrote: > Expat 2.5.0 has been released earlier today. Most importantly, this > release fixes CVE-2022-43680: a heap use-after-free vulnerability after > overeager destruction of a shared DTD in function > XML_ExternalEntityParserCreate in out-of-memory situations, with > expected impact of denial of service or potentially arbitrary code > execution. > > https://blog.hartwork.org/posts/expat-2-5-0-released > https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes > > Signed-off-by: Fabrice Fontaine > --- > package/expat/expat.hash | 8 ++++---- > package/expat/expat.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca In-Reply-To: <20221026194401.997459-1-james.hilliard1@gmail.com> References: <20221026194401.997459-1-james.hilliard1@gmail.com> Message-ID: <20221026215107.62e60ab2@windsurf> On Wed, 26 Oct 2022 13:44:01 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/glibc/glibc.hash | 2 +- > package/glibc/glibc.mk | 2 +- > package/localedef/localedef.mk | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:20 +0200 Subject: [Buildroot] [git commit] package/rtl8723bu: disable package for s390x architecture Message-ID: <20221026195154.9C21087167@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bff3a804024e1931affcbf13453761afd3c767c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8723bu/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723bu/Config.in b/package/rtl8723bu/Config.in index 266a794a7d..7c624fc4d4 100644 --- a/package/rtl8723bu/Config.in +++ b/package/rtl8723bu/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723BU bool "rtl8723bu" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bu wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723BU https://github.com/lwfinger/rtl8723bu comment "rtl8723bu needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:17 +0200 Subject: [Buildroot] [git commit] package/rtl8189es: disable package for s390x architecture Message-ID: <20221026195154.87C9787165@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=682224d6f6e80e78ff61f3545a7ae5d7a15ba887 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Fixes: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8189es/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189es/Config.in b/package/rtl8189es/Config.in index 2e3474e5e1..11dd225436 100644 --- a/package/rtl8189es/Config.in +++ b/package/rtl8189es/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189ES bool "rtl8189es" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189es. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189ES https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189es needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:22 +0200 Subject: [Buildroot] [git commit] package/rtl8723ds: disable package for s390x architecture Message-ID: <20221026195154.A655287168@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5835a64d3648b4f3a012d57a01775e7eeb1418b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8723ds/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723ds/Config.in b/package/rtl8723ds/Config.in index ef7dd39a68..e5123a2aae 100644 --- a/package/rtl8723ds/Config.in +++ b/package/rtl8723ds/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723DS bool "rtl8723ds" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bs wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723DS https://github.com/lwfinger/rtl8723ds comment "rtl8723ds needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:27 +0200 Subject: [Buildroot] [git commit] package/wilc-driver: disable package for s390x architecture Message-ID: <20221026195154.C8C7687167@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9c2dec7a2ba990233784f0e6baf1cd67d9220f9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Reviewed-by: Kris Bahnsen Signed-off-by: Thomas Petazzoni --- package/wilc-driver/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in index 7ed062bb66..7f970bd38b 100644 --- a/package/wilc-driver/Config.in +++ b/package/wilc-driver/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_WILC_DRIVER bool "wilc kernel module" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help External kernel module for WILC1000/3000 devices. @@ -59,4 +60,5 @@ endif endif comment "wilc kernel module needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:19 +0200 Subject: [Buildroot] [git commit] package/rtl8189fs: disable package for s390x architecture Message-ID: <20221026195154.9166587166@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=33400378d05cf078314ed0fa9612fa5ab13f7fa6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8189fs/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189fs/Config.in b/package/rtl8189fs/Config.in index ae69b79235..78eeed1a4f 100644 --- a/package/rtl8189fs/Config.in +++ b/package/rtl8189fs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189FS bool "rtl8189fs" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189fs. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189FS https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189fs needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:23 +0200 Subject: [Buildroot] [git commit] package/rtl8812au-aircrack-ng: disable package for s390x architecture Message-ID: <20221026195154.B0B3F87165@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=895692594f9aac04dfede06067eca794533869d8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8812au-aircrack-ng/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8812au-aircrack-ng/Config.in b/package/rtl8812au-aircrack-ng/Config.in index 70cbd15221..d903ab2b3f 100644 --- a/package/rtl8812au-aircrack-ng/Config.in +++ b/package/rtl8812au-aircrack-ng/Config.in @@ -1,8 +1,10 @@ comment "rtl8812au-aircrack-ng needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8812AU_AIRCRACK_NG bool "rtl8812au-aircrack-ng" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8812au wifi driver (aircrack-ng repository) From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:25 +0200 Subject: [Buildroot] [git commit] package/rtl8821au: disable package for s390x architecture Message-ID: <20221026195154.BE9D687166@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1e18cc291bbb1c16401abb1b2b661e4e150092f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8821au/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8821au/Config.in b/package/rtl8821au/Config.in index 87c191b22a..3d7bbf643d 100644 --- a/package/rtl8821au/Config.in +++ b/package/rtl8821au/Config.in @@ -1,8 +1,10 @@ comment "rtl8821au needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8821AU bool "rtl8821au" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8821au wifi driver From thomas.petazzoni at bootlin.com Wed Oct 26 19:53:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:53:24 +0200 Subject: [Buildroot] [PATCH 0/7] Disable packages with CONFIG_WIRELESS on s390x In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026215324.63c63c41@windsurf> On Wed, 26 Oct 2022 15:26:27 +0200 Giulio Benetti wrote: > Linux s390x doesn't support CONFIG_WIRELESS so this patchset disable > all packages with Linux CONFIG_WIRELESS for s390x architecture. > > Giulio Benetti (7): > package/rtl8189es: disable package for s390x architecture > package/rtl8189fs: disable package for s390x architecture > package/rtl8723bu: disable package for s390x architecture > package/rtl8723ds: disable package for s390x architecture > package/rtl8812au-aircrack-ng: disable package for s390x architecture > package/rtl8821au: disable package for s390x architecture > package/wilc-driver: disable package for s390x architecture When I saw this, initially I was a bit "meh", and wondered if some more generic mechanism wouldn't be more relevant, like a BR2_LINUX_KERNEL_SUPPORTS_WIRELESS or something like this. But then I thought that this is the first case for which we have a situation like that, so we're not sure what other cases will look like. So for now, I applied your patches as-is, and we can revisit later if we identify similar issues that would encourage us in finding a more generic solution to the problem. So: all patches applied as-is. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:00:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:00:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-2-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> Message-ID: <20221026220009.12ec01ee@windsurf> Hello Tobias, Thanks for this patch! On Thu, 20 Oct 2022 16:14:09 +0200 Tobias Waldekranz wrote: > Add upstream patch that sources the library path (lib vs. lib64) from > the compiler rather than from uname(1). Could you copy/paste the details of the build failure that was occurring, and provide details on the context it was occurring? Indeed, when looking at the results of our autobuilders in terms of failures when building libbpf, I don't see anything relevant: http://autobuild.buildroot.net/?reason=libbpf% In recent months, we only had build failures on the S390x architecture, that don't seem related to this. > ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > > diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > new file mode 100644 > index 0000000000..3730b2fa41 Please put the patch directly in package/libbpf/. Putting it in a 1.0.1/ sub-directory is not needed. We only do that for packages where multiple versions are used (like package/gcc, package/binutils for example). > --- /dev/null > +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > @@ -0,0 +1,37 @@ > +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 > +From: Tobias Waldekranz > +Date: Fri, 14 Oct 2022 21:14:14 +0200 > +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets > + > +Determining the correct library installation path (lib vs. lib64) > +using uname(1) breaks in cross compilation scenarios where word widths > +differ between the host and target system. > + > +Instead, source the information from the compilers '-dumpmachine' > +option (supported by both GCC and Clang). > + > +We call this the "host" architecture, using the same nomenclature as > +Autotools (--host configure option). > + Please add: Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 > +Signed-off-by: Tobias Waldekranz Could you send a v2 with those changes? I was about to do the changes myself, but I really don't know which build failure this patch is fixing so I couldn't fix that up myself in the commit log. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:08:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:08:25 +0200 Subject: [Buildroot] [git commit] package/libbpf: remove architecture restrictions Message-ID: <20221026200948.760C28716D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51ecbe500f1bce6725ea78c8193b9efae5da2e6f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since Buildroot commit 3145adfb69ba ("package/libbpf: needs headers >= 4.13"), libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. Commit f693354c30bd ("package/libbpf: add BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM, but these architecture dependencies are no longer needed due to the bump on the kernel headers version requirement. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- package/libbpf/Config.in | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index b3d6e44c6a..1465366c9e 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,15 +1,5 @@ -config BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS - bool - # see src/bpf.c - default y if BR2_arc - default y if BR2_aarch64 || BR2_aarch64_be - default y if BR2_i386 || BR2_x86_64 - default y if BR2_sparc || BR2_sparc64 - default y if BR2_s390x - config BR2_PACKAGE_LIBBPF bool "libbpf" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils @@ -27,7 +17,6 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ From thomas.petazzoni at bootlin.com Wed Oct 26 20:10:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:10:28 +0200 Subject: [Buildroot] [PATCH 2/4] package/libbpf: remove architecture restrictions In-Reply-To: <20221020141412.346992-3-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-3-tobias@waldekranz.com> Message-ID: <20221026221028.7e11ea80@windsurf> Hello Tobias, On Thu, 20 Oct 2022 16:14:10 +0200 Tobias Waldekranz wrote: > Since 3145adfb69ba, libbpf depends on Linux headers >= 4.13. This > requirement renders the explicit list of supported architectures, > previously added in f693354c30bd overly restrictive, as the syscall > number for bpf(2) has been defined since Linux 3.18. > > f693354c30bd was introduced to fix a build issue where a toolchain > using very old kernel headers (3.13) failed to build libbpf for ARM. > > Signed-off-by: Tobias Waldekranz > --- > package/libbpf/Config.in | 11 ----------- > 1 file changed, 11 deletions(-) It is not easy to check if the bpf syscall was indeed wired up in all architectures we support, but let's assume it's the case as of 4.13 :-) I have applied, with a slightly improved commit log: package/libbpf: remove architecture restrictions Since Buildroot commit 3145adfb69ba ("package/libbpf: needs headers >= 4.13"), libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. Commit f693354c30bd ("package/libbpf: add BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM, but these architecture dependencies are no longer needed due to the bump on the kernel headers version requirement. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:15:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:15:28 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221020141412.346992-4-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> Message-ID: <20221026221528.393a1d39@windsurf> Hello Tobias, On Thu, 20 Oct 2022 16:14:11 +0200 Tobias Waldekranz wrote: > This makes it obvious that the comment is just the negation of the > dependency requirements. It also makes it easier for other packages to > depend on libbpf. > > Signed-off-by: Tobias Waldekranz > --- > package/libbpf/Config.in | 15 ++++++++------- > 1 file changed, 8 insertions(+), 7 deletions(-) > > diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in > index 1465366c9e..7e816c193d 100644 > --- a/package/libbpf/Config.in > +++ b/package/libbpf/Config.in > @@ -1,11 +1,16 @@ > -config BR2_PACKAGE_LIBBPF > - bool "libbpf" > +config BR2_PACKAGE_LIBBPF_SUPPORTED > + bool > depends on BR2_TOOLCHAIN_HAS_SYNC_4 > depends on BR2_USE_WCHAR # elfutils > depends on !BR2_STATIC_LIBS # elfutils > depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 > depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils I'm afraid, but we don't do this in Buildroot, in none of our packages. I think our rationale is that by duplicating these dependencies, it is easier to maintain the Config.in comment in the packages that select BR2_PACKAGE_LIBBPF. I agree it's a very arbitrary choice, but we really strongly want things to be consistent between all Buildroot packages, so we cannot change this for just one package. If we want to change this, it needs to be discussed (advantages vs. drawbacks), then the documentation needs to be updated, and all packages changed. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Wed Oct 26 20:17:36 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 22:17:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: fix build without asciidoc Message-ID: <20221026201736.327835-1-fontaine.fabrice@gmail.com> Set ac_cv_prog_A2X to disable build of documentation and avoid the following build failure without a working a2x raised since at least bump to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') Fixes: - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef Signed-off-by: Fabrice Fontaine --- package/usbguard/usbguard.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index ca539a55f5..4e906e8b87 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -10,6 +10,7 @@ USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE USBGUARD_CPE_ID_VENDOR = usbguard_project USBGUARD_SELINUX_MODULES = usbguard +USBGUARD_CONF_ENV = ac_cv_prog_A2X="" USBGUARD_CONF_OPTS = \ --with-bundled-catch \ --with-bundled-pegtl \ -- 2.35.1 From fontaine.fabrice at gmail.com Wed Oct 26 20:39:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 22:39:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: fix build without threads Message-ID: <20221026203941.555393-1-fontaine.fabrice@gmail.com> Fix the following build failure without threads raised since bump to version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': Settings.cpp:1281:9: error: break statement not within loop or switch 1281 | break; | ^~~~~ Fixes: - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 Signed-off-by: Fabrice Fontaine --- ...fix-single-threaded-compile-breakage.patch | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 package/iperf/0001-fix-single-threaded-compile-breakage.patch diff --git a/package/iperf/0001-fix-single-threaded-compile-breakage.patch b/package/iperf/0001-fix-single-threaded-compile-breakage.patch new file mode 100644 index 0000000000..85baf76ea4 --- /dev/null +++ b/package/iperf/0001-fix-single-threaded-compile-breakage.patch @@ -0,0 +1,32 @@ +From 6405b7a005bb2364466b56f480d50af0be423d76 Mon Sep 17 00:00:00 2001 +From: Robert McMahon +Date: Tue, 27 Sep 2022 20:31:04 -0700 +Subject: [PATCH] fix single threaded compile breakage + +[Retrieved (and backported) from: +https://sourceforge.net/p/iperf2/code/ci/6405b7a005bb2364466b56f480d50af0be423d76] +Signed-off-by: Fabrice Fontaine +--- + include/version.h | 2 +- + src/Settings.cpp | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/Settings.cpp b/src/Settings.cpp +index aac1b5f..fc5a181 100644 +--- a/src/Settings.cpp ++++ b/src/Settings.cpp +@@ -1160,10 +1160,10 @@ void Settings_Interpret (char option, const char *optarg, struct thread_Settings + delete [] tmp; + } + } ++ } + #else + fprintf(stderr, "bounceback-congest option requires a platform that supports threads\n"); + #endif +- } + } + if (bouncebackdelaystart) { + bouncebackdelaystart = 0; +-- +2.35.1 + -- 2.35.1 From tobias at waldekranz.com Wed Oct 26 20:59:13 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Wed, 26 Oct 2022 22:59:13 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221026220009.12ec01ee@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> <20221026220009.12ec01ee@windsurf> Message-ID: <878rl29u8u.fsf@waldekranz.com> On ons, okt 26, 2022 at 22:00, Thomas Petazzoni via buildroot wrote: > Hello Tobias, > > Thanks for this patch! Thank you for reviewing! > On Thu, 20 Oct 2022 16:14:09 +0200 > Tobias Waldekranz wrote: > >> Add upstream patch that sources the library path (lib vs. lib64) from >> the compiler rather than from uname(1). > > Could you copy/paste the details of the build failure that was > occurring, and provide details on the context it was occurring? > > Indeed, when looking at the results of our autobuilders in terms of > failures when building libbpf, I don't see anything relevant: > > http://autobuild.buildroot.net/?reason=libbpf% > > In recent months, we only had build failures on the S390x architecture, > that don't seem related to this. Sorry, I should have explained the issue better: Building libbpf "works" without this patch, so I'm not surprised that there are no autobuild errors. It is just that shared objects and pkg-config files are always (assuming a 64-bit build system) installed to /lib64 in target & staging. If you then try to build something that _depends_ on libbpf, pkg-config won't be able to find it since /lib64 is not in its path. Hence why I stumbled upon this - kmemd was the first package to depend on libbpf. Here's a log when building kmemd for 32-bit PowerPC without this patch: ~/src/buildroot/x-ppc$ make kmemd >>> kmemd 1.0.0 Configuring (cd /home/wkz/src/buildroot/x-ppc/build/kmemd-1.0.0/ && rm -rf config.cache && PATH="/home/wkz/src/buildroot/x-ppc/host/bin:/home/wkz/src/buildroot/x-ppc/host/sbin:/home/wkz/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-ar" AS="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-as" LD="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-ld" NM="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-nm" CC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc" GCC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc" CPP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-cpp" CXX="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-g++" FC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gfortran" F77="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gfortran" RANLIB="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-ranlib" READELF="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-readelf" STRIP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-strip" OBJCOPY="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/wkz/src/buildroot/x-ppc/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/wkz/src/buildroot/x-ppc/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/wkz/src/buildroot/x-ppc/host/include" LDFLAGS_FOR_BUILD="-L/home/wkz/src/buildroot/x-ppc/host/lib -Wl,-rpath,/home/wkz/src/buildroot/x-ppc/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/wkz/src/buildroot/x-ppc/host/bin/pkg-config" STAGING_DIR="/home/wkz/src/buildroot/x-ppc/host/powerpc-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-gnu --host=powerpc-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking for powerpc-buildroot-linux-gnu-gcc... /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc accepts -g... yes checking for /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc option to enable C11 features... none needed checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-gnu-strip... /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-strip checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc... none checking whether make supports nested variables... (cached) yes checking for powerpc-buildroot-linux-gnu-gcc... (cached) /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc accepts -g... (cached) yes checking for /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc option to enable C11 features... (cached) none needed checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc understands -c and -o together... (cached) yes checking pkg-config is at least version 0.9.0... yes checking for libbpf >= 1.0.0... no configure: error: Package requirements (libbpf >= 1.0.0) were not met: Package 'libbpf', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables libbpf_CFLAGS and libbpf_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. make[1]: *** [package/pkg-generic.mk:283: /home/wkz/src/buildroot/x-ppc/build/kmemd-1.0.0/.stamp_configured] Error 1 make: *** [Makefile:23: _all] Error 2 And this is the source of the problem: ~/src/buildroot/x-ppc$ find host/powerpc-buildroot-linux-gnu/sysroot/ -name libbpf.pc host/powerpc-buildroot-linux-gnu/sysroot/usr/lib64/pkgconfig/libbpf.pc >> ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> >> diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> new file mode 100644 >> index 0000000000..3730b2fa41 > > Please put the patch directly in package/libbpf/. Putting it in a > 1.0.1/ sub-directory is not needed. We only do that for packages where > multiple versions are used (like package/gcc, package/binutils for > example). Will fix in v2. >> --- /dev/null >> +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> @@ -0,0 +1,37 @@ >> +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 >> +From: Tobias Waldekranz >> +Date: Fri, 14 Oct 2022 21:14:14 +0200 >> +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets >> + >> +Determining the correct library installation path (lib vs. lib64) >> +using uname(1) breaks in cross compilation scenarios where word widths >> +differ between the host and target system. >> + >> +Instead, source the information from the compilers '-dumpmachine' >> +option (supported by both GCC and Clang). >> + >> +We call this the "host" architecture, using the same nomenclature as >> +Autotools (--host configure option). >> + > > Please add: > > Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Sure thing. >> +Signed-off-by: Tobias Waldekranz > > Could you send a v2 with those changes? I was about to do the changes > myself, but I really don't know which build failure this patch is > fixing so I couldn't fix that up myself in the commit log. > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Wed Oct 26 21:03:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:03:33 +0200 Subject: [Buildroot] [PATCH 1/2] package/shapelib: add SHAPELIB_CPE_ID_VENDOR Message-ID: <20221026210334.565454-1-fontaine.fabrice@gmail.com> cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib Signed-off-by: Fabrice Fontaine --- package/shapelib/shapelib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index bedd15dc35..52f9584e19 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -8,6 +8,7 @@ SHAPELIB_VERSION = 1.5.0 SHAPELIB_SITE = http://download.osgeo.org/shapelib SHAPELIB_LICENSE = MIT or LGPL-2.0 SHAPELIB_LICENSE_FILES = web/license.html COPYING +SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Wed Oct 26 21:03:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:03:34 +0200 Subject: [Buildroot] [PATCH 2/2] package/shapelib: fix CVE-2022-0699 In-Reply-To: <20221026210334.565454-1-fontaine.fabrice@gmail.com> References: <20221026210334.565454-1-fontaine.fabrice@gmail.com> Message-ID: <20221026210334.565454-2-fontaine.fabrice@gmail.com> A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0 and older releases. This issue may allow an attacker to cause a denial of service or have other unspecified impact via control over malloc. Signed-off-by: Fabrice Fontaine --- ...Remove-double-free-in-contrib-shpsrt.patch | 26 +++++++++++++++++++ package/shapelib/shapelib.mk | 3 +++ 2 files changed, 29 insertions(+) create mode 100644 package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch diff --git a/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch new file mode 100644 index 0000000000..a565874b8c --- /dev/null +++ b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch @@ -0,0 +1,26 @@ +From c75b9281a5b9452d92e1682bdfe6019a13ed819f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Albin=20Eldst=C3=A5l-Ahrens?= +Date: Mon, 3 Jan 2022 12:34:41 +0100 +Subject: [PATCH] Remove double free() in contrib/shpsrt, issue #39 + +This fixes issue #39 + +[Retrieved from: +https://github.com/OSGeo/shapelib/commit/c75b9281a5b9452d92e1682bdfe6019a13ed819f] +Signed-off-by: Fabrice Fontaine +--- + contrib/shpsort.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/contrib/shpsort.c b/contrib/shpsort.c +index e21e9e0..920cd8c 100644 +--- a/contrib/shpsort.c ++++ b/contrib/shpsort.c +@@ -113,7 +113,6 @@ static char ** split(const char *arg, const char *delim) { + free(result[--i]); + } + free(result); +- free(copy); + return NULL; + } + result = tmp; diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index 52f9584e19..37d2d9ae64 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -11,4 +11,7 @@ SHAPELIB_LICENSE_FILES = web/license.html COPYING SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES +# 0001-Remove-double-free-in-contrib-shpsrt.patch +SHAPELIB_IGNORE_CVES += CVE-2022-0699 + $(eval $(autotools-package)) -- 2.35.1 From alistair23 at gmail.com Wed Oct 26 21:03:36 2022 From: alistair23 at gmail.com (Alistair Francis) Date: Thu, 27 Oct 2022 07:03:36 +1000 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Message-ID: On Thu, Oct 27, 2022 at 4:35 AM Thomas Petazzoni via buildroot wrote: > > Since glibc 2.33 (upstream commit > 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed > to build glibc for RISC-V 32-bit. Indeed > sysdeps/unix/sysv/linux/riscv/configure.ac contains: > > if test $libc_cv_riscv_int_abi = ilp32; then > arch_minimum_kernel=5.4.0 > fi > > In order to take into account this dependency, we add the appropriate > logic in package/glibc/Config.in and > toolchain/toolchain-buildroot/Config.in. > > This change means that if headers < 5.4.0 are selected, then no C > library at all will be available for RISC-V 32-bit, as glibc is the > only C library supporting RISC-V 32-bit currently. However, thanks to > the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the > choice...endchoice for the C library selection will not be empty, > allowing the user to see the Config.in comment explaining why glibc > can't be selected. > > Therefore, technically this commit does prevent from creating a > configuration with RISC-V 32-bit and headers < 5.4.0, but it will have > BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by > package/Makefile.in, which aborts the build early on pointing out that > the configuration is invalid. > > Fixes: > > http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ > > Signed-off-by: Thomas Petazzoni Reviewed-by: Alistair Francis Alistair > --- > package/glibc/Config.in | 1 + > toolchain/toolchain-buildroot/Config.in | 4 ++++ > 2 files changed, 5 insertions(+) > > diff --git a/package/glibc/Config.in b/package/glibc/Config.in > index b63f99b0b4..71c50504ac 100644 > --- a/package/glibc/Config.in > +++ b/package/glibc/Config.in > @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 26d731d976..64f7892f98 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" > depends on BR2_RISCV_64 > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 > > +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" > + depends on BR2_RISCV_32 > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 > + > comment "glibc on ARC needs a toolchain w/ headers >= 5.1" > depends on BR2_arc > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From tobias at waldekranz.com Wed Oct 26 21:14:08 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Wed, 26 Oct 2022 23:14:08 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221026221528.393a1d39@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> <20221026221528.393a1d39@windsurf> Message-ID: <875yg69tjz.fsf@waldekranz.com> On ons, okt 26, 2022 at 22:15, Thomas Petazzoni via buildroot wrote: > Hello Tobias, > > On Thu, 20 Oct 2022 16:14:11 +0200 > Tobias Waldekranz wrote: > >> This makes it obvious that the comment is just the negation of the >> dependency requirements. It also makes it easier for other packages to >> depend on libbpf. >> >> Signed-off-by: Tobias Waldekranz >> --- >> package/libbpf/Config.in | 15 ++++++++------- >> 1 file changed, 8 insertions(+), 7 deletions(-) >> >> diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in >> index 1465366c9e..7e816c193d 100644 >> --- a/package/libbpf/Config.in >> +++ b/package/libbpf/Config.in >> @@ -1,11 +1,16 @@ >> -config BR2_PACKAGE_LIBBPF >> - bool "libbpf" >> +config BR2_PACKAGE_LIBBPF_SUPPORTED >> + bool >> depends on BR2_TOOLCHAIN_HAS_SYNC_4 >> depends on BR2_USE_WCHAR # elfutils >> depends on !BR2_STATIC_LIBS # elfutils >> depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils >> depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 >> depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils > > I'm afraid, but we don't do this in Buildroot, in none of our packages. > I think our rationale is that by duplicating these dependencies, it is > easier to maintain the Config.in comment in the packages that select > BR2_PACKAGE_LIBBPF. Fair enough, I will drop this change in v2 and copy the information to kmemd.mk instead. Is there a convention for how to comment dependencies that stem from grandparent packages? E.g. v2, kmemd.mk will declare: depends on BR2_USE_WCHAR # as libbpf requires it, but only because of its dependency on elfutils. So what is the proper in this case? "elfutils" or "libbpf"? Or maybe something like "elfutils->libbpf"? > I agree it's a very arbitrary choice, but we really strongly want > things to be consistent between all Buildroot packages, so we cannot > change this for just one package. If we want to change this, it needs > to be discussed (advantages vs. drawbacks), then the documentation > needs to be updated, and all packages changed. Completely understand. As a Buildroot user, I really appreciate that consistency! > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mail at dbrgn.ch Wed Oct 26 21:09:17 2022 From: mail at dbrgn.ch (Danilo) Date: Wed, 26 Oct 2022 23:09:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.1 Message-ID: <20221026230917.5092886c@c3po> Signed-off-by: Danilo Bargen --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..1d9eb7bf25 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 90690d3a6e2f6c7444c281865bd5b0787e0afa599f06b52b4283bea4541e1e77 tealdeer-1.6.1.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..aabfe2983c 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.1 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT -- 2.38.1 From mail at dbrgn.ch Wed Oct 26 21:10:51 2022 From: mail at dbrgn.ch (Danilo) Date: Wed, 26 Oct 2022 23:10:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.0 In-Reply-To: <20221012002101.02c1f4bf@c3po> References: <20221012002101.02c1f4bf@c3po> Message-ID: <5ed339df-22c9-4d89-917b-87f7605a084e@app.fastmail.com> This patch can be ignored, it has been superseded by the patch that bumps to version 1.6.1. Danilo From fontaine.fabrice at gmail.com Wed Oct 26 21:21:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:21:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/faad2: bump to version 2.10.1 Message-ID: <20221026212122.592457-1-fontaine.fabrice@gmail.com> https://github.com/knik0/faad2/releases/tag/2.10.1 Signed-off-by: Fabrice Fontaine --- package/faad2/faad2.hash | 2 +- package/faad2/faad2.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/faad2/faad2.hash b/package/faad2/faad2.hash index 2eb11d73aa..3a9c36df00 100644 --- a/package/faad2/faad2.hash +++ b/package/faad2/faad2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0c6d9636c96f95c7d736f097d418829ced8ec6dbd899cc6cc82b728480a84bfb faad2-2.10.0.tar.gz +sha256 4c16c71295ca0cbf7c3dfe98eb11d8fa8d0ac3042e41604cfd6cc11a408cf264 faad2-2.10.1.tar.gz sha256 d3baf3a54943cf12a994c85867a18dec84f810901b2f2878ddfd77efcc3c150f COPYING diff --git a/package/faad2/faad2.mk b/package/faad2/faad2.mk index d085c814bd..eecab35af8 100644 --- a/package/faad2/faad2.mk +++ b/package/faad2/faad2.mk @@ -4,8 +4,8 @@ # ################################################################################ -FAAD2_VERSION = 2.10.0 -FAAD2_SITE = $(call github,knik0,faad2,$(subst .,_,$(FAAD2_VERSION))) +FAAD2_VERSION = 2.10.1 +FAAD2_SITE = $(call github,knik0,faad2,$(FAAD2_VERSION)) FAAD2_LICENSE = GPL-2.0 FAAD2_LICENSE_FILES = COPYING FAAD2_CPE_ID_VENDOR = audiocoding -- 2.35.1 From thomas.petazzoni at bootlin.com Wed Oct 26 21:28:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 23:28:05 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221026220009.12ec01ee@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> <20221026220009.12ec01ee@windsurf> Message-ID: <20221026232805.29f33605@windsurf> On Wed, 26 Oct 2022 22:00:09 +0200 Thomas Petazzoni wrote: > Could you copy/paste the details of the build failure that was > occurring, and provide details on the context it was occurring? By building kmemd, I figured out what the issue was, and it's now clear. I have applied your PATCH 1/4 with an extended explanation. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Wed Oct 26 21:40:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:40:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/iproute2: bump to version 6.0.0 Message-ID: <20221026214055.625267-1-fontaine.fabrice@gmail.com> Drop patches (already in version) Signed-off-by: Fabrice Fontaine --- .../0001-ipstats-Add-param.h-for-musl.patch | 29 ---------------- .../0002-ipstats-add-missing-headers.patch | 33 ------------------- ...-_GNU_SOURCE-when-checking-for-setns.patch | 29 ---------------- package/iproute2/iproute2.hash | 2 +- package/iproute2/iproute2.mk | 2 +- 5 files changed, 2 insertions(+), 93 deletions(-) delete mode 100644 package/iproute2/0001-ipstats-Add-param.h-for-musl.patch delete mode 100644 package/iproute2/0002-ipstats-add-missing-headers.patch delete mode 100644 package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch diff --git a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch b/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch deleted file mode 100644 index db6982ab8b..0000000000 --- a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cf6b60c504d4be5e1df2b2745e55d677967831d0 Mon Sep 17 00:00:00 2001 -From: Changhyeok Bae -Date: Tue, 9 Aug 2022 04:01:05 +0000 -Subject: [PATCH] ipstats: Add param.h for musl - -Fix build error for musl -| /usr/src/debug/iproute2/5.19.0-r0/iproute2-5.19.0/ip/ipstats.c:231: undefined reference to `MIN' - -Signed-off-by: Changhyeok Bae -[ upstream status: cf6b60c504d4be5e1df2b2745e55d677967831d0 ] ---- - ip/ipstats.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 5cdd15ae..1ac275bd 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0+ - #include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0002-ipstats-add-missing-headers.patch b/package/iproute2/0002-ipstats-add-missing-headers.patch deleted file mode 100644 index d4b9a5d10d..0000000000 --- a/package/iproute2/0002-ipstats-add-missing-headers.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 28c740473510cd911b97cc5d7d23bd809a0f200b Mon Sep 17 00:00:00 2001 -From: Stephen Hemminger -Date: Tue, 9 Aug 2022 13:27:33 -0700 -Subject: [PATCH] ipstats: add missing headers - -IWYU reports several headers are not explicitly -included by ipstats. - -Signed-off-by: Stephen Hemminger -[ upstream status: 28c740473510cd911b97cc5d7d23bd809a0f200b] ---- - ip/ipstats.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 1ac275bd..dadded14 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,7 +1,11 @@ - // SPDX-License-Identifier: GPL-2.0+ -+#include - #include - #include -+#include -+#include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch b/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch deleted file mode 100644 index a5076d7711..0000000000 --- a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch +++ /dev/null @@ -1,29 +0,0 @@ -From d5fe96ab70928508f072a47449e9b641e46de323 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Wed, 10 Aug 2022 22:34:40 -0700 -Subject: [PATCH] configure: Define _GNU_SOURCE when checking for setns - -glibc defines this function only as gnu extention - -Signed-off-by: Khem Raj -Signed-off-by: Stephen Hemminger -[ upstream status: d5fe96ab70928508f072a47449e9b641e46de323 ] ---- - configure | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/configure b/configure -index 440facb7..c02753bb 100755 ---- a/configure -+++ b/configure -@@ -191,6 +191,7 @@ check_ipt_lib_dir() - check_setns() - { - cat >$TMPDIR/setnstest.c < - int main(int argc, char **argv) - { --- -2.37.2 - diff --git a/package/iproute2/iproute2.hash b/package/iproute2/iproute2.hash index a4b0e62c02..45af05a200 100644 --- a/package/iproute2/iproute2.hash +++ b/package/iproute2/iproute2.hash @@ -1,3 +1,3 @@ # From https://kernel.org/pub/linux/utils/net/iproute2/sha256sums.asc -sha256 26b7a34d6a7fd2f7a42e2b39c5a90cb61bac522d1096067ffeb195e5693d7791 iproute2-5.19.0.tar.xz +sha256 523139e9e72aec996374fa2de74be4c53d2dd05589488934d21ff97bae19580a iproute2-6.0.0.tar.xz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/iproute2/iproute2.mk b/package/iproute2/iproute2.mk index 5c3595d5f4..287c6b14e2 100644 --- a/package/iproute2/iproute2.mk +++ b/package/iproute2/iproute2.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPROUTE2_VERSION = 5.19.0 +IPROUTE2_VERSION = 6.0.0 IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_DEPENDENCIES = host-bison host-flex host-pkgconf \ -- 2.35.1 From thomas.petazzoni at bootlin.com Wed Oct 26 22:19:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 00:19:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <875yg69tjz.fsf@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> <20221026221528.393a1d39@windsurf> <875yg69tjz.fsf@waldekranz.com> Message-ID: <20221027001911.30ad7215@windsurf> Hello Tobias, On Wed, 26 Oct 2022 23:14:08 +0200 Tobias Waldekranz wrote: > Fair enough, I will drop this change in v2 and copy the information to > kmemd.mk instead. Is there a convention for how to comment dependencies > that stem from grandparent packages? E.g. v2, kmemd.mk will declare: No need to send a v2, I already applied the patches locally, did the few fixes, I will push them soon. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 05:37:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 05:37:14 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-26 Message-ID: <20221027053721.34599408F7@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-26 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 1 | 0 | 0 | 1 | 2022.08.x | 11 | 11 | 0 | 22 | master | 130 | 253 | 11 | 394 | Classification of failures by reason for master ----------------------------------------------- brltty | 11 glibc-2.36-44-g2628500f5dff... | 11 host-f2fs-tools-1.15.0 | 11 host-sentry-cli-1.59.0 | 11 xz-5.2.7 | 10 crun-1.5 | 9 file-5.43 | 8 btrfs-progs-5.16.2 | 7 igd2-for-linux-2.1 | 7 imagemagick-7.1.0-51 | 7 libarchive-3.6.1 | 7 libcodec2-1.0.5 | 7 libglib2-2.72.3 | 7 systemd-250.4 | 7 dash-0.5.11.5 | 6 host-go-1.19.1 | 6 linux-6.0.1 | 6 host-binutils-2.38 | 5 sysvinit-2.99 | 5 efivar-38 | 4 gobject-introspection-1.72.0 | 4 libnss-3.84 | 4 libshout-2.4.6 | 4 autofs-5.1.8 | 3 elfutils-0.186 | 3 fftw-quad-3.3.8 | 3 host-pahole-73383b3a39afe86... | 3 assimp-5.2.5 | 2 batman-adv-2021.4 | 2 gensio-2.5.5 | 2 glibc-2.36-66-ga1dc0be03c9d... | 2 host-binutils-2.37 | 2 host-gcc-final-11.3.0 | 2 host-gcc-final-12.2.0 | 2 host-rust-1.64.0 | 2 libdill-32d0e8b733416208e04... | 2 libgcrypt-1.10.1 | 2 lxc-4.0.12 | 2 perl-5.34.1 | 2 traceroute-2.1.0 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 avro-c-1.11.0 | 1 berkeleydb-5.3.28 | 1 bluez5_utils-5.65 | 1 brotli-1.0.9 | 1 coreutils-9.1 | 1 crucible-2022.05.25 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fwts-22.09.00 | 1 gerbera-1.10.0 | 1 gsl-2.6 | 1 gummiboot-2bcd919c681c952eb... | 1 hawktracer-2ec19d7192334414... | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-10.4.0 | 1 host-gcc-initial-12.2.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-go-1.19.2 | 1 iperf-2.1.8 | 1 lcms2-2.13.1 | 1 libglvnd-1.4.0 | 1 liblog4c-localtime-1.0 | 1 libpciaccess-0.17 | 1 libsigsegv-2.14 | 1 libusb-1.0.26 | 1 linux-5.10.145-cip17 | 1 linux-pam-1.5.2 | 1 linuxptp-3.1.1 | 1 lirc-tools-0.10.2 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mender-3.4.0 | 1 micropython-1.19.1 | 1 musl-1.2.3 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 openssh-9.1p1 | 1 procps-ng-3.3.17 | 1 rauc-1.8 | 1 sdl-1.2.15 | 1 stress-ng-0.13.05 | 1 strongswan-5.9.5 | 1 tealdeer-1.5.0 | 1 uclibc-1.0.42 | 1 usbguard-1.1.2 | 1 vlc-3.0.17.4 | 1 volk-2.5.2 | 1 wavemon-0.9.4 | 1 wolfssl-5.5.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/825c547741ac8bb54d4050f52f70aca1b9eb1172 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ef561e91e163aafcca46e598068ba73ec14a1c71 | m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e96cc7c2dbbc349338232325dd9ef585d602bb05 | xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5b8e68a67a3c11fc896a403ccf782c4228576b9e | or1k | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/5199b99d2ff151def6695fe22b7f024519c31af5 | ORPH or1k | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/7433b5c88b7ce58bd5dc26ef6f24dde6b0037f87 | ORPH mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/987fe55733d421daf0412492a3663edcb3963a4f | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e8d7318a009da7a00bf78675c1b0342b4c1628fb | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2e64d1d67f07129840d11d3ae5b020d2c3489233 | mips64el | avro-c-1.11.0 | NOK | http://autobuild.buildroot.net/results/93f0c3d7beb049ffa57bc19489469b03c69af7ab | microblazeel | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/00783b96a0c4ae5a96c304f4c9e14d362ad1d29f | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2403eb08e8c4ca099b201f7fe64af886dea89a34 | sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f887d5479d57aa99ffa9314743fea5c378e32146 | ORPH sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/c45f392bcea5aabb2b19ffc57235857a9c25376d | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/d2be0e0f9d31278182a3eddbb7f08c42c1528f43 | armeb | brltty | TIM | http://autobuild.buildroot.net/results/a7f2ef340835c126629edc3c95c49c5f2c462e94 | mips | brltty | TIM | http://autobuild.buildroot.net/results/fe254dc18b681ff3d348158ba9e39e43fe1b593f | arm | brltty | TIM | http://autobuild.buildroot.net/results/bcaea35beffcf7ee75da36d82cecb4cc9904917a | arc | brltty | TIM | http://autobuild.buildroot.net/results/f82026541aa4b4a243b75a7a1334ef46ac478adc | arm | brltty | TIM | http://autobuild.buildroot.net/results/2834aa9cb9392e0d99cc42b57cbb783649aa09be | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/83268db829ae5bcecf0f6ad4e0a860a9cb214ee6 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/4a8f43b4ea210e4c4a10b340495bd379f9ab8d96 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/a63028e2703a888e9e5520f0fbc846a882f5ea6b | mips | brltty | TIM | http://autobuild.buildroot.net/results/cb57d0f022621f8ec5163b0afe8fc89a3ed63493 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/d5b60f3048b83c62ac16e51393c91a04e90c8a23 | arceb | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/167847c34dbb3be7143509edd727c6e74e87fd93 | microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e5de3908ea666d639f7e3f6a1e302d6c3c4fbee5 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/d021c95e83e9339eea7ad3641fef1f9c69de1f1c | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/84faa2608966784bda26e8b4faa7880205d0caa7 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8becde0ffb273aae34b0ff4091548b5971738b38 | ORPH riscv64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ba5a780c19a0ecefee493ecaa8584e8b6093801 | ORPH sh4a | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0ca8b0c2aaa8606508a2504da8b36c69d2632c52 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/89111720553eff90ca19262b8b5bade81f09a139 | ORPH sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/8a159c5e6d5ce01acbff97db68f98d66b93c0a86 | ORPH powerpc64le | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/cdc35f470b590f6effcf95834f21663f6ca867d7 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e844d1155ef1f2c42becc088465b309d1beaea62 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/de118307f79917b5ddf8ecb4ea2856ceb4b937b3 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/87a65e958850d23a96bf1403a122e73504f2a8fe | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c2749e0a1d56d2bd4091e4ba29da9328f4318428 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8e63cd00921275768749d4a17d2618652fc97621 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4773770097c5ed8e5aeb43c9c1c1af0af92039b5 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b453f6ea565b52b7fc0598cf32e3c7ba3f85d9c9 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/447a2f23c6c297da63ab27dddcd5d80aebab65ac | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/42f148ca72996032a0d7bcc2f9113b967c18b3d5 | or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/757c725f2f57df7992a93a9007f8457e6ac99b66 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a23d40509ab97bcd0dfc491ef952495ab10bde40 | ORPH nios2 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/c042eec3c084f5c047b40d8dce9c74e5317ced65 | ORPH s390x | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b6867d2a3fee88899a0aa721d058276c264b844e | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/124e0138ee45e5c8320cb1b9c036bf63384e0f19 | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/c1b943bc0be9bf2192f61fec5577a2f9d1e84c9c | ORPH mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/5daa0e4320b4fd29c9fbaa9b86dc6105f79a70d2 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/6be4051f0220114ef3254ccdd71f30506b98977c | powerpc64le | efivar-38 | NOK | http://autobuild.buildroot.net/results/e8109c396889b36b9e53400f4f27650bbd666574 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/702e1aeed6a14b10977a77bb37e056bb7c6dc4df | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5efb55de0148ad15458fba3524c5e02df6abb8f2 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/7c7a1687ebd6b5d5ee93328b94d0562be2ba68eb | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/905415ceec0c92ba86d375c24aa8daa335fdd7dd | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/b173cbab10dd2309290d1744786755d8e4ce3e1d | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/89b4903b0adfbc4f7b1126922a5bb94ec2efd026 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/7f75f73a57160adff80e6fe225812286846fe915 | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 | ORPH mipsel | file-5.43 | NOK | http://autobuild.buildroot.net/results/5215df9d5c615e00cd029314435e33d382f7b7d1 | ORPH or1k | file-5.43 | NOK | http://autobuild.buildroot.net/results/1681451934639a6910ae3c2cfd2448fea53ccaa0 | ORPH armeb | file-5.43 | NOK | http://autobuild.buildroot.net/results/2f53b16c249614fbe462e06c5b5e60f6019d7092 | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/d7f8260b0633351698e473ec7a86f12f02b912db | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/b177da01d237226290d4f670fd98f7da5070f19d | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/6b292574fcf0d4aeee953dd42c6428bd7e26b34e | ORPH arc | file-5.43 | NOK | http://autobuild.buildroot.net/results/e6b30c1b564852894e5082c50b646ca60dc0b769 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/6d0d1c9c8af16ec2c56e8b243465b5162aa1cec1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/989b14ac7de43179706cd39a5a986bec2a04d46a | microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/c04fc4df8d4972f1427bea845c76231b352a3768 | microblazeel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/4a282bb2e313da4078e596647e2ad3c4aad8cc25 | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/2ec6cf38146f3ba3e50a9a5599cf38644eff3405 | arceb | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/e7977b52277e0ae3837b12f98e1a2b009faff876 | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/3d7c9847bfe9465e4184bcb6d2c8c08868a4bf5f | m68k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/137762e70ecb0e9f2a12f84436100141057ccc69 | aarch64 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/ac450a22ab1bd3ca1b5110fdf2001c9d5aaceeb2 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9b683099479d5db6bcaa746451f646bf2b78f59c | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/15b2bf08e5e852f46795bf2980654c3adb2577be | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/88acea6b33673c255cddc99555bfd6de32f6fc43 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e1ae0385bb9664b11f1ccee3fc1472daccb4dab | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02a18813eed8185d749e85465d9286bc03e3db0c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8ba8882a861cf7df359c23969c09b2be0725b2e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/845c24be5e718d0d5c208a77412c89337fa58521 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/42e40ce687e54f7f9274a6bbc7bb0116f64a648f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1023e8c72d1a1d472a48283deb9225bf8a68bdf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44cf9a7d530aab7d0d6003e6bd1ac7bc7848af52 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edd204835afb9a5ad5e9789b57295e0447ba33cf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b797170affea0fce17f4c4dd6e18a6d84eee08d4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e202bf53a683930f3cad6edef2a4dea629eaecb | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/5571d5913556f73c1ac8582cbdf4a7e4fba3f356 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/a0392b6b521cb3e98c70b5797895e6e0ee197aa4 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8e8307246afcb2e4c0fd4512474287de9dffc4cc | ORPH mips | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1c020ef273ec848d808437b66ac9416dc7acd92c | ORPH i686 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/dc002b2efc755559d5963d50666e9d8a87d9f09d | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/0f9365a7fea101b70bd2d27b4c5ed1e3255844c9 | ORPH x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/6880ab57859a1bead9e5c027620625b509b2dffb | nios2 | hawktracer-2ec19d7192334414... | NOK | http://autobuild.buildroot.net/results/7f130ab90602374e152efd1bae7fd55099a25ff9 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e550010fc8e2cf4b720b42ef1774b6729d618635 | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/236ef5fda773993ed0b39ba2eb766bf055b87b94 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b5ac87f1d2c94e02c7af8b5ea04b7eca1155b1f | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8f2b2e56dd5b8a6f9faa895f1ef144877e51e2c5 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2529c844fb6bb5ea1198477ff6f79d1dcf6bc64 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12cc7ecba650c7b08ca56c4894d6a277078fb25a | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b7e5ee38b1046b913498c2e1080dfdecbb84eca3 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3198e2bc086c97662919b36916d61a5898ba794 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b64a2932149376b879459301e9a9a4a0f6436f0f | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd08bdb6675361e5280751638b4a3ee313d2e877 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5b8f6ee2748b45e3db3e5c1d605f48e8b6b15408 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d6c00ebdf079eed07e6a1d977f40373ef367f064 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/48de79ac3a582fa9e82e42fd93f4ab98c04a5e0c | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4b92bddf8ff2ee5d792b1ad1e8d27662986fb213 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/395b1618aac1f2c62f45690504609b9af60515e7 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9a334a27512948851446432c95df31177e8d3e76 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b1ad86b2d214d9625bfe7e43e9a88fda07cf7e31 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/05de5fcd72fa687126dd1ab0698bc56463121aa0 | arm | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/02696dc36166c44bfb836bfaf2a976c9f931b714 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b1dc5cad41cbb078c64f4fb708c5e77e73a34b7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/66e8191f4fc6af356d3fecb2b5c84ce42ac0f948 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/baca56c99acf72c32019320453b8126a8b802354 | arm | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/ccc2699fa00ac4006b619b36f56d13fab6c551f7 | aarch64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/67e37d9d00b65330ce265b6fb51711e1ff1be01e | arm | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/6554b3503b4b6a192d748888dfc11056accfc4a0 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/872e8a2dd9b96d66dfe51bd7287ef14aa03a5b45 | ORPH mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/8f96fec32590df27fc918f94be377e4cd78b0e37 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d69c6e35038c8d0b958b2025cc7dd25541030540 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/06f6ada2421bc595108a801aa9da039982663eb0 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d6c4d1cdebc4d3a04fceefbce059bd464df6e6c2 | riscv64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/12071f61176f90565f2b29b70dd538ec713e0e22 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fc645d0e89ed2a1be67eb7a46da9f21bd05afc33 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/42e68753b9adb23c5ee4cdb9621548b4fd9fdd6c | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8070446ce7f6a7766eee08c997b66b8902d7435f | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/68907e07ddbce85d8676d8092bffbb91f98b6c43 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/60aaaf8a932101c305875ffef58705219f0c2a5d | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/219616d859c1cdda892d239fd70d8026189126ef | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f28c9091db5f48a4afc084e2929a8d9dc0ecd29 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08b6d9be1408dd54bcd7ac9eb69e1c0f02cc39b1 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f33d70f53ae5394425d2839464771aa7fae1569a | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a65de0a7d9dedf9e6e2e71f1ffe21baa830c3c0c | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f06f289eba8c1435dc37ab2918c59f5115ab337b | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fd3532c5e4bac4013e0f630f9773c8185f1c1d8a | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a0a352ccd2f0b7f0abff9418a510003fadc677f5 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c69d92f9ad33eccf482226c31fa5fff76f3cbf73 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/219059be99929512c7bac93e242af9b0e55b32a5 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/801ffd4967bed251fa96c5a9b530171440584066 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c7bed50b1dab4dd18a7dfd7f7a8daab85805ebc | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6ba1729880afc537221290868c20facaa5e4767b | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4e76beae0d3a6883740dfaadd0ffcda9c7ffc6e2 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/defc5e84150d68b664380355a563b8c721411a96 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f0bb1cbb7349028db3ec37ec1ae371d9d5d3ad34 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fc2c1a1113d9214813e9ff0baaf837f94df08a54 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a8169be4ccc3c8ddee13688448ae7dc147500c56 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40aaae4125c17b3abbbc152acbacdafe0cbd6f16 | microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/cede597258cff8c15a42a39f8479d6cb12914ea8 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/dba3622da8b71e2b1eea3132870374359c10217e | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/d5869fbff77f2972bb63f3adfe380ecc318377c9 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/30f2138ec7bd86a4e024aa46325ba960b16b3ead | ORPH microblazeel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/3d177d1ce753146693c944ce3b11ab42614d3b03 | ORPH mips64el | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/433f3a49deb5bccba9655a1fb8dd299d814fdb9a | ORPH arceb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/29f18d711034ebd085fa2141b9d7f77489479eef | ORPH arm | iperf-2.1.8 | NOK | http://autobuild.buildroot.net/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 | xtensa | lcms2-2.13.1 | NOK | http://autobuild.buildroot.net/results/5c42bb1a2bf3f81285ccae400c8b351fa46f97af | i586 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5492ae83a448cf4752ec95c21fc9050bf9aabea8 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bedac2c10e317ddacdbfd147ca89cb1f6c657a5e | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/287dc8e515d48db988c37f03c001b093177038c9 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dbe26e2860ce312d1909e2fa538e50062b464e31 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c646f70adf71e367ecdcfe8122782a2d9b74c43e | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bccbb83cbbeb6f54a6c8165467151b47d3b4ca48 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/84adc94a8bdaebb60cd8087dc41652795e58dde4 | powerpc64le | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/a52df649dadcdd804d8a668a497cf5535f005074 | mips64el | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/70f18513d975160c868d51d1b42a59dbb21cfb1a | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/76b60772f81c2e3b6e1150024376954c14f2bd8e | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/6e34f3c1d1180c3aabf4288db559632c0eb29d1c | arm | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/f38ba949ffa02d415545caa8a8024ed2181a5a8f | powerpc64le | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/8b53e57858583d127b94c7280816c3967dff5d35 | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3f95f832aacebc81e0323005c01040529c8a7462 | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/035e8aa6c34c1fce0f7f7d83fe1387b2ccc362e2 | riscv32 | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/fcf188d660f0eb3a7f3205dfcb9683d39a950797 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/45f2f4b93b173517a70cf9bbbeadaaf493a34a8f | ORPH i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/78027f2bc0180d83c9b9d0739a4cf7e28908e19d | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/344834c476ae73ace0f2ecd2b05fb0089c7a330f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/296d469b8515f0f1ed3c096317f285bde8ed24c2 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1c6805ed0aaaeac78074ac9874be30560a2f854e | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1c8c24083dcd452b141fe7123ff2ece440ae2af1 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ac961c4ea63926a9abee99a06a60042f0bc94e46 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/194ce2000c8f725f4d576295ee8705187c384edb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/236b25dfc5be57e58e858f2c11bdf4383e715557 | microblazeel | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/27bc946f6fc701b7482208e68d637a63b3217dfb | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/ebb1e11f0f60748401717644a8bd939e39fa0203 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5a2e998567349f339cc02001df0f9264e02aedf5 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ddc116f787af0d1c34ee6ddd8ad5b92e902f0fb9 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/13e409670cd9bb7b2b0cea4df0ae941329df41ff | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e9c41823dbc651222679771bd16b9aba786ad98b | sh4eb | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/08d57b8d147ac0021e6a848d800a5b85e8bbc65f | nios2 | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/7e798ab35898a2601876c53e72c52b907794b2cf | ORPH microblazeel | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/3a85cbc64fc13fa6e335ca8dcf64f8a5e77c71f0 | ORPH sparc | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/ac39928f1734ad9d6e490b66aec302190855637c | ORPH sh4aeb | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/4b0a8ca3d82d0a14a6b45c450be6dbf5388ca425 | ORPH powerpc | libsigsegv-2.14 | NOK | http://autobuild.buildroot.net/results/bb07cebebe8a26836cec163acf2e25f4dd495051 | mips64el | libusb-1.0.26 | NOK | http://autobuild.buildroot.net/results/165d4caf6e1e1d40ba81e901fe38a84ed3db6dfe | armeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/fd269255cd6af30dcc00fbae71e951137569b08d | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/dc4789182ed5f77084341dffb97b25f72419d04b | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/9095d1e400932f3f2504da091bf9c60835cafbee | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/8cb2e6090dd858e3ced68d7ac104786e1f8ccdaf | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1e9cdc5885ec8a858634470dbb90ff68c12ab13b | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ad79543d1af444d09db3d37a7cde65ae8925d8d9 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1cf4537a16834b990b5ad28d4f4bd6dbdbd68ea4 | ORPH armeb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/91700c3956df581e5bab3877ea32fde0d50f9d50 | ORPH aarch64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/97293b9304ed760828743148001d475cb4252f81 | microblazeel | lirc-tools-0.10.2 | NOK | http://autobuild.buildroot.net/results/5ffa71de0b7d9e18fa13b76cf6e4df5b7daeb9d7 | ORPH powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/770609d58eab18743dfa43098fa466a37541ba4a | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b0fed736ac62a522c57c639aed7e873cadb70a62 | sparc | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/44b7a26ff8196b39edf972771187b7af2898bdb7 | nios2 | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/e650ad609a205f458d736e8bac695e946e99bdc3 | ORPH powerpc64le | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/ca4c2ad381fcb3f13428f367bb0480f5f63f71cd | aarch64 | micropython-1.19.1 | NOK | http://autobuild.buildroot.net/results/32adc06d047e3ecb0f1b7b773cdc66c39a7f67ee | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/63d623aa6bffade2bb602592a3cce3d830c20ab3 | sh4aeb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/5c9e0a3478ce39d154328a84ebea98e1f56cde63 | powerpc64le | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/af3f2408e3ea7e880fb2f3fc0f01351a04e98645 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/dca1b0e9f323131babc327cc32a9d15ef7683ef1 | ORPH sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3ced42bff937848382c71d5a110adf70c94cb290 | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1c288e5bf53df44835ea01eaf190c9af4aebd6a8 | x86_64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/9be42feb1d4e8d2cee8cda708665e96afd3d02e3 | ORPH riscv64 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/3f3a50acf5de4c17aa3d0e8d27f803e33c479f2b | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/60fe56597202b32691ef588d33a2bc2fddaeea53 | ORPH sh4a | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/556593987e972d04efd7baabfa72a6a702aca2c6 | arceb | strongswan-5.9.5 | NOK | http://autobuild.buildroot.net/results/5cf6aa18fd9928581314b2970a8090481f015c8b | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/055faf9bc247880690d112ff8a013742b29c09f0 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c49e7520f6d2c865a320ab03b7986c88fa10a790 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c34e462796163247bc753c039935162b1b44669e | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/39b991d6faf98252004280a37bb12009b2cc38ad | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1dc46ac8c9a8bc80df8b9b06caf3b1cb6de2aa74 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ca4e9c0697cc7a650f747d69f43872a47ed2bf2a | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f8906f87caa72ed561b8980b5f9e039b57ad8345 | x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/856f41485a0f3650fc7ec6c2f2af9bbcfa8fca00 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ef6bcf6e56a88d9cb6b42388dff07a24e5518e44 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d3d840dbf1532ec527db0edd46e27962cf2b4fc5 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f9fde8c126538523309e53a340124046919474db | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2b54068cfc0ef80fd4ea67a77341c3d36c18eac | ORPH mipsel | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/95fa846021d82a2043f24575e34a0e7548e75d16 | mips64el | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/66b9c45fecbbdf8dfa8219e67bbdc1813f0be4db | armeb | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/d1331ffbbabd6e690841df1f3fac34ac1f389aa1 | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/650de76a851707aa3b0a096e3d36c4a0447f4720 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/fad421293cf6cfebec15e39791b229fc69baa68f | mips | unknown | NOK | http://autobuild.buildroot.net/results/88225e33da151865aecae34ce0ec897758148c4e | powerpc64le | usbguard-1.1.2 | NOK | http://autobuild.buildroot.net/results/b70dcf8628d9522579e4678e4d8873d7e52ddd95 | sh4aeb | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/86a0c3dde276fb606bf61184a796f3670339b767 | powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/c55e21ac3c27ac5ab9ae44b4a75b1318e37b08c4 | powerpc64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/e3b8f3e407e44cf340ef6e8612374d9e223ef02f | ORPH mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/9551cca51591005e2600ab6a83edf8c811d4ad30 | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9a02909ad44c4d79b2507d056ae42bada790565f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/a6fd3541e585a65e4adf990a6dabdce846953df2 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/1f6b567a95d38036ad4ae2507be3207701b75602 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/28b9c395d0d37370b236da7f738f31aa3f0d88ba | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7a4de28a9a1d97ef8aa3a33f5f6f200d009dda37 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0fdc122cbe145bd78070e79854a0bd0c523e29dd | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/520a0c262d3555722cc25437f1917fca448ad1ae | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f8d5259288d5002086d21efa5cb61c3841ef705c | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e5ac80ce873cfcfe4f5a4098fa0edd59739a0eb2 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9e34d27b55bdad4adf70e7deed078b797fc3923d | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/bf634446a668a3a680c1a1eb1ce4604e0e963c68 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 3 crucible-2022.05.25 | 1 gerbera-1.10.0 | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 ipmiutil-3.1.8 | 1 libdeflate-1.12 | 1 perl-5.34.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/8ba2977bd712fc965c5375cff30b34b67fcc534e | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ff276691c492cfb3b6abcf34d5e3a0926c40f22c | mipsel | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/4167e14851112a8f1699611b62c08e5b75632ad0 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/74d5dbb5bdf81b32c317dca4fc7212b16ced156f | ORPH mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/537bdc9b1c06c90a5150f72cdbcb3c7c8439638f | x86_64 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/c3a0d5952cc9c82f7b1f9c21c116d6a8b4a65e57 | armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/576796e44afccc51916a7d42d2f99e39bf4011ee | arceb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fee72dff0db81510d62e883c8d0c5cc25a47c591 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1f8b1e7227a8799aa19994a2c7c26d88ed705bc1 | ORPH microblaze | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4372b32333d37bd08b8a9385e92af9911f374c0b | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/040d870c3584235c64af33fc602a149a872af782 | Gitlab CI results for 2022-10-26 ================================ -- http://autobuild.buildroot.net From yann.morin at orange.com Thu Oct 27 05:50:35 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Thu, 27 Oct 2022 07:50:35 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026205312.3f729eb8@windsurf> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> <20221026205312.3f729eb8@windsurf> Message-ID: <6313_1666849837_635A1C2D_6313_23_1_20221027055035.GG1657509@tl-lnx-nyma7486> Thomas, All, On 2022-10-26 20:53 +0200, Thomas Petazzoni spake thusly: > On Wed, 26 Oct 2022 15:31:22 +0200 > wrote: > > What about external toolchains? > External toolchains are not affected because when we copy the sysroot > from the toolchain into STAGING_DIR, we do this: [--SNIP--] > (from toolchain/helpers.mk:copy_toolchain_sysroot) Ah, so this is already handled explicitly as a generic fixup.? > Does that this seem like a good enough answer for the external > toolchain case? If so, I can submit a v2 with an amended commit log. Yes, this is perfect, thanks! Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From thomas.petazzoni at bootlin.com Wed Oct 26 20:35:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:35:14 +0200 Subject: [Buildroot] [git commit] package/libbpf: install in the correct lib directory Message-ID: <20221027064525.E3CC587279@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c86b69a16dee0281d75890118110be934367430e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The libbpf build system currently uses the output of "uname -m" to determine if the library should be installed in "lib" or "lib64". However, uname -m returns the architecture of the build machine, which often has nothing to do with the target CPU architecture. A patch has been submitted and accepted upstream to address this issue, by using the $(CC) -dumpmachine output instead. This ensures libbpf is installed in either "lib" or "lib64" depending on the bitness of the target CPU architecture. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- ...-Fix-cross-compilation-for-32-bit-targets.patch | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch new file mode 100644 index 0000000000..12c22f3147 --- /dev/null +++ b/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch @@ -0,0 +1,38 @@ +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Fri, 14 Oct 2022 21:14:14 +0200 +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets + +Determining the correct library installation path (lib vs. lib64) +using uname(1) breaks in cross compilation scenarios where word widths +differ between the host and target system. + +Instead, source the information from the compilers '-dumpmachine' +option (supported by both GCC and Clang). + +We call this the "host" architecture, using the same nomenclature as +Autotools (--host configure option). + +Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 +Signed-off-by: Tobias Waldekranz +--- + src/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index 3cd0854..d535f81 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -77,7 +77,8 @@ INSTALL = install + + DESTDIR ?= + +-ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(shell uname -m)),) ++HOSTARCH = $(firstword $(subst -, ,$(shell $(CC) -dumpmachine))) ++ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(HOSTARCH)),) + LIBSUBDIR := lib64 + else + LIBSUBDIR := lib +-- +2.34.1 + From thomas.petazzoni at bootlin.com Wed Oct 26 21:30:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 23:30:13 +0200 Subject: [Buildroot] [git commit] package/kmemd: new package Message-ID: <20221027064525.F3B3E872B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b3f915c6561bcb2f7952faca3bedf1766f299538 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master kmemd let's you inspect a live Linux kernel's memory using GDB. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/kmemd/Config.in | 20 ++++++++++++++++++++ package/kmemd/kmemd.hash | 3 +++ package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ 5 files changed, 47 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..bc4640685a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2936,6 +2936,9 @@ F: package/waf/ F: support/testing/tests/package/test_crudini.py F: support/testing/tests/package/test_redis.py +N: Tobias Waldekranz +F: package/kmemd/ + N: Tudor Holton F: package/openjdk/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ebafe11dea 100644 --- a/package/Config.in +++ b/package/Config.in @@ -111,6 +111,7 @@ menu "Debugging, profiling and benchmark" source "package/iozone/Config.in" source "package/kexec/Config.in" source "package/kexec-lite/Config.in" + source "package/kmemd/Config.in" source "package/kvm-unit-tests/Config.in" source "package/kyua/Config.in" source "package/latencytop/Config.in" diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in new file mode 100644 index 0000000000..902e636947 --- /dev/null +++ b/package/kmemd/Config.in @@ -0,0 +1,20 @@ +config BR2_PACKAGE_KMEMD + bool "kmemd" + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libbpf + depends on BR2_USE_WCHAR # libbpf + depends on !BR2_STATIC_LIBS # libbpf + depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf + select BR2_PACKAGE_LIBBPF + help + Explore a live Linux kernel's memory using GDB + + https://github.com/wkz/kmemd + +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ + || !BR2_TOOLCHAIN_HAS_THREADS \ + || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 \ + || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC) diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash new file mode 100644 index 0000000000..aecfea57f8 --- /dev/null +++ b/package/kmemd/kmemd.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/kmemd/kmemd.mk b/package/kmemd/kmemd.mk new file mode 100644 index 0000000000..902941b981 --- /dev/null +++ b/package/kmemd/kmemd.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# kmemd +# +################################################################################ + +KMEMD_VERSION = 1.0.0 +KMEMD_SITE = https://github.com/wkz/kmemd/releases/download/$(KMEMD_VERSION) +KMEMD_LICENSE = GPL-2.0 +KMEMD_LICENSE_FILES = COPYING +KMEMD_DEPENDENCIES = libbpf + +define KMEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_BPF_SYSCALL) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) + $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS) +endef + +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:46:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:46:19 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-2-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> Message-ID: <20221027084619.67b393b2@windsurf> On Thu, 20 Oct 2022 16:14:09 +0200 Tobias Waldekranz wrote: > Add upstream patch that sources the library path (lib vs. lib64) from > the compiler rather than from uname(1). > > Signed-off-by: Tobias Waldekranz > --- > ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch Thanks, applied with a rework commit log: package/libbpf: install in the correct lib directory The libbpf build system currently uses the output of "uname -m" to determine if the library should be installed in "lib" or "lib64". However, uname -m returns the architecture of the build machine, which often has nothing to do with the target CPU architecture. A patch has been submitted and accepted upstream to address this issue, by using the $(CC) -dumpmachine output instead. This ensures libbpf is installed in either "lib" or "lib64" depending on the bitness of the target CPU architecture. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni The patch was also moved away from the version-specific directory, and the upstream status of the patch was added in the patch itself. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:00 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221020141412.346992-5-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> Message-ID: <20221027084900.0844e13a@windsurf> On Thu, 20 Oct 2022 16:14:12 +0200 Tobias Waldekranz wrote: > kmemd let's you inspect a live Linux kernel's memory using GDB. > > Signed-off-by: Tobias Waldekranz I have applied a patch, with a few small changes. > --- > package/Config.in | 1 + > package/kmemd/Config.in | 11 +++++++++++ > package/kmemd/kmemd.hash | 5 +++++ > package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ > 4 files changed, 37 insertions(+) I added an entry in the DEVELOPERS file for this package, so that we know you are the contact. You will receive e-mails if there are build failures or CVEs affecting this package, and when new releases are made upstream (even though I suppose you are the upstream maintainer, so you should already know!) > diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in > new file mode 100644 > index 0000000000..2190488b0f > --- /dev/null > +++ b/package/kmemd/Config.in > @@ -0,0 +1,11 @@ > +config BR2_PACKAGE_KMEMD > + bool "kmemd" > + depends on BR2_PACKAGE_LIBBPF_SUPPORTED Changed to repeat the dependencies of libbpf. > + select BR2_PACKAGE_LIBBPF > + help > + Explore a live Linux kernel's memory using GDB > + > + https://github.com/wkz/kmemd > + > +comment "kmemd needs libbpf" > + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED This comment was not correct: you are selecting libbpf, so you don't need to say that you need it. Instead, I've added our usual comment, which corresponds to the dependencies inherited from libbpf. > diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash > new file mode 100644 > index 0000000000..60b8589dd2 > --- /dev/null > +++ b/package/kmemd/kmemd.hash > @@ -0,0 +1,5 @@ > +# Locally calculated > +md5 9954bf82279eeb0da016654689f69ac2 kmemd-1.0.0.tar.gz > +sha1 3ae3bdceb70d674f41f56cd489c7497944b9b0f0 kmemd-1.0.0.tar.gz > +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz When we have a sha256, md5/sha1 hashes are not needed, so I dropped them. Applied with those changes, thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: fix build without asciidoc In-Reply-To: <20221026201736.327835-1-fontaine.fabrice@gmail.com> References: <20221026201736.327835-1-fontaine.fabrice@gmail.com> Message-ID: <20221027084946.7ca40b33@windsurf> On Wed, 26 Oct 2022 22:17:36 +0200 Fabrice Fontaine wrote: > Set ac_cv_prog_A2X to disable build of documentation and avoid the > following build failure without a working a2x raised since at least bump > to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: > > a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) > a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) > /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') > > Fixes: > - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef > > Signed-off-by: Fabrice Fontaine > --- > package/usbguard/usbguard.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:32 +0200 Subject: [Buildroot] [git commit] package/usbguard: fix build without asciidoc Message-ID: <20221027065010.CBD4A872EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cff78c34fbf80880c39725049ff42c3dd632fd7a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Set ac_cv_prog_A2X to disable build of documentation and avoid the following build failure without a working a2x raised since at least bump to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') Fixes: - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/usbguard/usbguard.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index e0c9b58221..60b69df3be 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -10,6 +10,7 @@ USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE USBGUARD_CPE_ID_VENDOR = usbguard_project USBGUARD_SELINUX_MODULES = usbguard +USBGUARD_CONF_ENV = ac_cv_prog_A2X="" USBGUARD_CONF_OPTS = \ --with-bundled-catch \ --with-bundled-pegtl \ From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:02 +0200 Subject: [Buildroot] [git commit] package/iperf: fix build without threads Message-ID: <20221027065010.D4F13872ED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5335c9d12ce1bc269ae06996025ae8c6f9ee694c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure without threads raised since bump to version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': Settings.cpp:1281:9: error: break statement not within loop or switch 1281 | break; | ^~~~~ Fixes: - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...0001-fix-single-threaded-compile-breakage.patch | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/package/iperf/0001-fix-single-threaded-compile-breakage.patch b/package/iperf/0001-fix-single-threaded-compile-breakage.patch new file mode 100644 index 0000000000..85baf76ea4 --- /dev/null +++ b/package/iperf/0001-fix-single-threaded-compile-breakage.patch @@ -0,0 +1,32 @@ +From 6405b7a005bb2364466b56f480d50af0be423d76 Mon Sep 17 00:00:00 2001 +From: Robert McMahon +Date: Tue, 27 Sep 2022 20:31:04 -0700 +Subject: [PATCH] fix single threaded compile breakage + +[Retrieved (and backported) from: +https://sourceforge.net/p/iperf2/code/ci/6405b7a005bb2364466b56f480d50af0be423d76] +Signed-off-by: Fabrice Fontaine +--- + include/version.h | 2 +- + src/Settings.cpp | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/Settings.cpp b/src/Settings.cpp +index aac1b5f..fc5a181 100644 +--- a/src/Settings.cpp ++++ b/src/Settings.cpp +@@ -1160,10 +1160,10 @@ void Settings_Interpret (char option, const char *optarg, struct thread_Settings + delete [] tmp; + } + } ++ } + #else + fprintf(stderr, "bounceback-congest option requires a platform that supports threads\n"); + #endif +- } + } + if (bouncebackdelaystart) { + bouncebackdelaystart = 0; +-- +2.35.1 + From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: fix build without threads In-Reply-To: <20221026203941.555393-1-fontaine.fabrice@gmail.com> References: <20221026203941.555393-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085007.1d08e379@windsurf> On Wed, 26 Oct 2022 22:39:41 +0200 Fabrice Fontaine wrote: > Fix the following build failure without threads raised since bump to > version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: > > Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': > Settings.cpp:1281:9: error: break statement not within loop or switch > 1281 | break; > | ^~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 > > Signed-off-by: Fabrice Fontaine > --- > ...fix-single-threaded-compile-breakage.patch | 32 +++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 package/iperf/0001-fix-single-threaded-compile-breakage.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/shapelib: add SHAPELIB_CPE_ID_VENDOR In-Reply-To: <20221026210334.565454-1-fontaine.fabrice@gmail.com> References: <20221026210334.565454-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085054.57f7d9d4@windsurf> On Wed, 26 Oct 2022 23:03:33 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib > > Signed-off-by: Fabrice Fontaine > --- > package/shapelib/shapelib.mk | 1 + > 1 file changed, 1 insertion(+) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:26 +0200 Subject: [Buildroot] [git commit] package/shapelib: add SHAPELIB_CPE_ID_VENDOR Message-ID: <20221027065143.7D81D872F9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1545a88f9d5a694eed1a01dc0220ec1dabf5cabe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/shapelib/shapelib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index bedd15dc35..52f9584e19 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -8,6 +8,7 @@ SHAPELIB_VERSION = 1.5.0 SHAPELIB_SITE = http://download.osgeo.org/shapelib SHAPELIB_LICENSE = MIT or LGPL-2.0 SHAPELIB_LICENSE_FILES = web/license.html COPYING +SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:42 +0200 Subject: [Buildroot] [git commit] package/shapelib: fix CVE-2022-0699 Message-ID: <20221027065143.8941A872FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=810c0eecf1fb81de43c67d602290e911d6a3a486 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0 and older releases. This issue may allow an attacker to cause a denial of service or have other unspecified impact via control over malloc. Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...0001-Remove-double-free-in-contrib-shpsrt.patch | 26 ++++++++++++++++++++++ package/shapelib/shapelib.mk | 3 +++ 2 files changed, 29 insertions(+) diff --git a/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch new file mode 100644 index 0000000000..a565874b8c --- /dev/null +++ b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch @@ -0,0 +1,26 @@ +From c75b9281a5b9452d92e1682bdfe6019a13ed819f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Albin=20Eldst=C3=A5l-Ahrens?= +Date: Mon, 3 Jan 2022 12:34:41 +0100 +Subject: [PATCH] Remove double free() in contrib/shpsrt, issue #39 + +This fixes issue #39 + +[Retrieved from: +https://github.com/OSGeo/shapelib/commit/c75b9281a5b9452d92e1682bdfe6019a13ed819f] +Signed-off-by: Fabrice Fontaine +--- + contrib/shpsort.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/contrib/shpsort.c b/contrib/shpsort.c +index e21e9e0..920cd8c 100644 +--- a/contrib/shpsort.c ++++ b/contrib/shpsort.c +@@ -113,7 +113,6 @@ static char ** split(const char *arg, const char *delim) { + free(result[--i]); + } + free(result); +- free(copy); + return NULL; + } + result = tmp; diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index 52f9584e19..37d2d9ae64 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -11,4 +11,7 @@ SHAPELIB_LICENSE_FILES = web/license.html COPYING SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES +# 0001-Remove-double-free-in-contrib-shpsrt.patch +SHAPELIB_IGNORE_CVES += CVE-2022-0699 + $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.1 In-Reply-To: <20221026230917.5092886c@c3po> References: <20221026230917.5092886c@c3po> Message-ID: <20221027085402.4a8142b0@windsurf> On Wed, 26 Oct 2022 23:09:17 +0200 Danilo wrote: > Signed-off-by: Danilo Bargen > --- > package/tealdeer/tealdeer.hash | 2 +- > package/tealdeer/tealdeer.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/faad2: bump to version 2.10.1 In-Reply-To: <20221026212122.592457-1-fontaine.fabrice@gmail.com> References: <20221026212122.592457-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085433.79abc469@windsurf> On Wed, 26 Oct 2022 23:21:22 +0200 Fabrice Fontaine wrote: > https://github.com/knik0/faad2/releases/tag/2.10.1 > > Signed-off-by: Fabrice Fontaine > --- > package/faad2/faad2.hash | 2 +- > package/faad2/faad2.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/iproute2: bump to version 6.0.0 In-Reply-To: <20221026214055.625267-1-fontaine.fabrice@gmail.com> References: <20221026214055.625267-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085438.1bbe98a6@windsurf> On Wed, 26 Oct 2022 23:40:55 +0200 Fabrice Fontaine wrote: > Drop patches (already in version) > > Signed-off-by: Fabrice Fontaine > --- > .../0001-ipstats-Add-param.h-for-musl.patch | 29 ---------------- > .../0002-ipstats-add-missing-headers.patch | 33 ------------------- > ...-_GNU_SOURCE-when-checking-for-setns.patch | 29 ---------------- > package/iproute2/iproute2.hash | 2 +- > package/iproute2/iproute2.mk | 2 +- > 5 files changed, 2 insertions(+), 93 deletions(-) > delete mode 100644 package/iproute2/0001-ipstats-Add-param.h-for-musl.patch > delete mode 100644 package/iproute2/0002-ipstats-add-missing-headers.patch > delete mode 100644 package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:51:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:51:22 +0200 Subject: [Buildroot] [git commit] package/tealdeer: bump version to 1.6.1 Message-ID: <20221027065529.6F80187312@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=777f8fbec575397e638d5775336cf645a7ad80cf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Danilo Bargen Signed-off-by: Thomas Petazzoni --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..1d9eb7bf25 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 90690d3a6e2f6c7444c281865bd5b0787e0afa599f06b52b4283bea4541e1e77 tealdeer-1.6.1.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..aabfe2983c 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.1 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:08 +0200 Subject: [Buildroot] [git commit] package/faad2: bump to version 2.10.1 Message-ID: <20221027065529.799CA87314@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9376ed7bc46ebed9f97899cface0cd9b386292ba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/knik0/faad2/releases/tag/2.10.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/faad2/faad2.hash | 2 +- package/faad2/faad2.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/faad2/faad2.hash b/package/faad2/faad2.hash index 2eb11d73aa..3a9c36df00 100644 --- a/package/faad2/faad2.hash +++ b/package/faad2/faad2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0c6d9636c96f95c7d736f097d418829ced8ec6dbd899cc6cc82b728480a84bfb faad2-2.10.0.tar.gz +sha256 4c16c71295ca0cbf7c3dfe98eb11d8fa8d0ac3042e41604cfd6cc11a408cf264 faad2-2.10.1.tar.gz sha256 d3baf3a54943cf12a994c85867a18dec84f810901b2f2878ddfd77efcc3c150f COPYING diff --git a/package/faad2/faad2.mk b/package/faad2/faad2.mk index d085c814bd..eecab35af8 100644 --- a/package/faad2/faad2.mk +++ b/package/faad2/faad2.mk @@ -4,8 +4,8 @@ # ################################################################################ -FAAD2_VERSION = 2.10.0 -FAAD2_SITE = $(call github,knik0,faad2,$(subst .,_,$(FAAD2_VERSION))) +FAAD2_VERSION = 2.10.1 +FAAD2_SITE = $(call github,knik0,faad2,$(FAAD2_VERSION)) FAAD2_LICENSE = GPL-2.0 FAAD2_LICENSE_FILES = COPYING FAAD2_CPE_ID_VENDOR = audiocoding From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:18 +0200 Subject: [Buildroot] [git commit] package/iproute2: bump to version 6.0.0 Message-ID: <20221027065529.852B687315@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3cf8930508738ccea33448f2e59a15c7eee126b3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches (already in version) Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-ipstats-Add-param.h-for-musl.patch | 29 ------------------- .../0002-ipstats-add-missing-headers.patch | 33 ---------------------- ...efine-_GNU_SOURCE-when-checking-for-setns.patch | 29 ------------------- package/iproute2/iproute2.hash | 2 +- package/iproute2/iproute2.mk | 2 +- 5 files changed, 2 insertions(+), 93 deletions(-) diff --git a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch b/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch deleted file mode 100644 index db6982ab8b..0000000000 --- a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cf6b60c504d4be5e1df2b2745e55d677967831d0 Mon Sep 17 00:00:00 2001 -From: Changhyeok Bae -Date: Tue, 9 Aug 2022 04:01:05 +0000 -Subject: [PATCH] ipstats: Add param.h for musl - -Fix build error for musl -| /usr/src/debug/iproute2/5.19.0-r0/iproute2-5.19.0/ip/ipstats.c:231: undefined reference to `MIN' - -Signed-off-by: Changhyeok Bae -[ upstream status: cf6b60c504d4be5e1df2b2745e55d677967831d0 ] ---- - ip/ipstats.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 5cdd15ae..1ac275bd 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0+ - #include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0002-ipstats-add-missing-headers.patch b/package/iproute2/0002-ipstats-add-missing-headers.patch deleted file mode 100644 index d4b9a5d10d..0000000000 --- a/package/iproute2/0002-ipstats-add-missing-headers.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 28c740473510cd911b97cc5d7d23bd809a0f200b Mon Sep 17 00:00:00 2001 -From: Stephen Hemminger -Date: Tue, 9 Aug 2022 13:27:33 -0700 -Subject: [PATCH] ipstats: add missing headers - -IWYU reports several headers are not explicitly -included by ipstats. - -Signed-off-by: Stephen Hemminger -[ upstream status: 28c740473510cd911b97cc5d7d23bd809a0f200b] ---- - ip/ipstats.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 1ac275bd..dadded14 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,7 +1,11 @@ - // SPDX-License-Identifier: GPL-2.0+ -+#include - #include - #include -+#include -+#include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch b/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch deleted file mode 100644 index a5076d7711..0000000000 --- a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch +++ /dev/null @@ -1,29 +0,0 @@ -From d5fe96ab70928508f072a47449e9b641e46de323 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Wed, 10 Aug 2022 22:34:40 -0700 -Subject: [PATCH] configure: Define _GNU_SOURCE when checking for setns - -glibc defines this function only as gnu extention - -Signed-off-by: Khem Raj -Signed-off-by: Stephen Hemminger -[ upstream status: d5fe96ab70928508f072a47449e9b641e46de323 ] ---- - configure | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/configure b/configure -index 440facb7..c02753bb 100755 ---- a/configure -+++ b/configure -@@ -191,6 +191,7 @@ check_ipt_lib_dir() - check_setns() - { - cat >$TMPDIR/setnstest.c < - int main(int argc, char **argv) - { --- -2.37.2 - diff --git a/package/iproute2/iproute2.hash b/package/iproute2/iproute2.hash index a4b0e62c02..45af05a200 100644 --- a/package/iproute2/iproute2.hash +++ b/package/iproute2/iproute2.hash @@ -1,3 +1,3 @@ # From https://kernel.org/pub/linux/utils/net/iproute2/sha256sums.asc -sha256 26b7a34d6a7fd2f7a42e2b39c5a90cb61bac522d1096067ffeb195e5693d7791 iproute2-5.19.0.tar.xz +sha256 523139e9e72aec996374fa2de74be4c53d2dd05589488934d21ff97bae19580a iproute2-6.0.0.tar.xz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/iproute2/iproute2.mk b/package/iproute2/iproute2.mk index 5c3595d5f4..287c6b14e2 100644 --- a/package/iproute2/iproute2.mk +++ b/package/iproute2/iproute2.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPROUTE2_VERSION = 5.19.0 +IPROUTE2_VERSION = 6.0.0 IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_DEPENDENCIES = host-bison host-flex host-pkgconf \ From thomas.petazzoni at bootlin.com Thu Oct 27 06:56:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:56:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221025142929.3089316-1-james.hilliard1@gmail.com> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> Message-ID: <20221027085615.2c78028e@windsurf> On Tue, 25 Oct 2022 08:29:29 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/kmod/kmod.hash | 2 +- > package/kmod/kmod.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) We have a build failure: http://autobuild.buildroot.net/?reason=kmod-30 Not sure if it's new with version 30 or not, though. Could you have a look? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From robimarko at gmail.com Thu Oct 27 08:56:28 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 10:56:28 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package Message-ID: <20221027085628.102086-1-robimarko@gmail.com> mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko --- Changes in v3: * Add dependecy on 5.1 headers Changes in v2: * Correct license * Add host-pkgconf to DEPENDENCIES * Add minimal required kernel config options --- package/Config.in | 1 + package/mdio-tools/Config.in | 10 ++++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ 4 files changed, 34 insertions(+) create mode 100644 package/mdio-tools/Config.in create mode 100644 package/mdio-tools/mdio-tools.hash create mode 100644 package/mdio-tools/mdio-tools.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ed41e8bdd4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -536,6 +536,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..8a09bf19a7 --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,10 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..308a23824b --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) -- 2.37.3 From robimarko at gmail.com Thu Oct 27 08:56:54 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 10:56:54 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Wed, 19 Oct 2022 at 18:15, Angelo Compagnucci wrote: > > > > On Sun, Oct 2, 2022 at 5:05 PM Robert Marko wrote: >> >> mdio-tools are kernel module and accompanying tools for low-level >> debugging of devices attached on MDIO bus like PHY-s, switches etc. >> >> Userspace tools provide C22 or C45 reads and writes, benchmarking >> and even dedicated Marvell Link Street tools via the included >> kernel module. >> >> Signed-off-by: Robert Marko >> --- >> Changes in v2: >> * Correct license >> * Add host-pkgconf to DEPENDENCIES >> * Add minimal required kernel config options >> --- >> package/Config.in | 1 + >> package/mdio-tools/Config.in | 9 +++++++++ >> package/mdio-tools/mdio-tools.hash | 3 +++ >> package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ >> 4 files changed, 33 insertions(+) >> create mode 100644 package/mdio-tools/Config.in >> create mode 100644 package/mdio-tools/mdio-tools.hash >> create mode 100644 package/mdio-tools/mdio-tools.mk >> >> diff --git a/package/Config.in b/package/Config.in >> index e3a34d6e97..ed41e8bdd4 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -536,6 +536,7 @@ endmenu >> source "package/mbpfan/Config.in" >> source "package/mdadm/Config.in" >> source "package/mdevd/Config.in" >> + source "package/mdio-tools/Config.in" >> source "package/memtest86/Config.in" >> source "package/memtester/Config.in" >> source "package/memtool/Config.in" >> diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in >> new file mode 100644 >> index 0000000000..feb1e825ac >> --- /dev/null >> +++ b/package/mdio-tools/Config.in >> @@ -0,0 +1,9 @@ >> +comment "mdio-tools needs a Linux kernel to be built" >> + depends on !BR2_LINUX_KERNEL >> + >> +config BR2_PACKAGE_MDIO_TOOLS >> + bool "mdio-tools" >> + depends on BR2_LINUX_KERNEL > > > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > I think you miss this here Thanks, I completely missed it. Added in v3. Regards, Robert > >> >> + select BR2_PACKAGE_LIBMNL >> + help >> + Low-level debug tools for MDIO devices >> diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash >> new file mode 100644 >> index 0000000000..0111165f27 >> --- /dev/null >> +++ b/package/mdio-tools/mdio-tools.hash >> @@ -0,0 +1,3 @@ >> +# Locally computed >> +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz >> +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING >> diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk >> new file mode 100644 >> index 0000000000..308a23824b >> --- /dev/null >> +++ b/package/mdio-tools/mdio-tools.mk >> @@ -0,0 +1,20 @@ >> +################################################################################ >> +# >> +# mdio-tools >> +# >> +################################################################################ >> + >> +MDIO_TOOLS_VERSION = 1.2.0 >> +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) >> +MDIO_TOOLS_LICENSE = GPL-2.0 >> +MDIO_TOOLS_LICENSE_FILES = COPYING >> +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl >> + >> +MDIO_TOOLS_MODULE_SUBDIRS = kernel >> +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS >> + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) >> + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) >> +endef >> + >> +$(eval $(kernel-module)) >> +$(eval $(autotools-package)) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > > > > -- > > Angelo Compagnucci > > Software Engineer > > angelo at amarulasolutions.com > __________________________________ > Amarula Solutions SRL > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 (0)42 243 5310 > info at amarulasolutions.com > > www.amarulasolutions.com > > [`as] https://www.amarulasolutions.com| From thomas.petazzoni at bootlin.com Thu Oct 27 09:52:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:52:44 +0200 Subject: [Buildroot] [git commit] package/mdio-tools: new package Message-ID: <20221027095300.5AAE187326@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8fdf8731e727dc5c2d4080d7a56e1d71dc25e533 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/mdio-tools/Config.in | 14 ++++++++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 21 +++++++++++++++++++++ 5 files changed, 42 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index bc4640685a..dac8fefd0b 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2510,6 +2510,9 @@ F: package/tzdata/ N: RJ Ascani F: package/azmq/ +N: Robert Marko +F: package/mdio-tools/ + N: Robert Rose F: package/grpc/ diff --git a/package/Config.in b/package/Config.in index ebafe11dea..e4eb2b7434 100644 --- a/package/Config.in +++ b/package/Config.in @@ -537,6 +537,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..d63ba8f727 --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,14 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +comment "mdio-tools needs a toolchain w/ headers >= 5.1" + depends on !BR2_LINUX_KERNEL + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..c4be54142e --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,21 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel + +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 09:55:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:55:29 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package In-Reply-To: <20221027085628.102086-1-robimarko@gmail.com> References: <20221027085628.102086-1-robimarko@gmail.com> Message-ID: <20221027115529.0ac5cb5d@windsurf> Hello Robert, On Thu, 27 Oct 2022 10:56:28 +0200 Robert Marko wrote: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko Thanks, I have applied your patch, with two small changes. See below. > package/Config.in | 1 + > package/mdio-tools/Config.in | 10 ++++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 34 insertions(+) The entry in the DEVELOPERS file was missing, so I've added it. > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..8a09bf19a7 > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,10 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 We like to have a Config.in comment corresponding to this dependency, so I've added it: +comment "mdio-tools needs a toolchain w/ headers >= 5.1" + depends on !BR2_LINUX_KERNEL + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 And I know I realize that the depends on !BR2_LINUX_KERNEL should have been a depends on BR2_LINUX_KERNEL. I will fix that up. Thanks for the contribution! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 09:55:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:55:40 +0200 Subject: [Buildroot] [git commit] package/mdio-tools: fix Config.in comment dependency Message-ID: <20221027095620.93C498732E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f51600d04ccb20ed5c47b9e0e894fe560f16539e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We want to show the headers >= 5.1 Config.in comment when the BR2_LINUX_KERNEL is satisfied, not when it isn't. Signed-off-by: Thomas Petazzoni --- package/mdio-tools/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in index d63ba8f727..f24c1a6974 100644 --- a/package/mdio-tools/Config.in +++ b/package/mdio-tools/Config.in @@ -2,7 +2,7 @@ comment "mdio-tools needs a Linux kernel to be built" depends on !BR2_LINUX_KERNEL comment "mdio-tools needs a toolchain w/ headers >= 5.1" - depends on !BR2_LINUX_KERNEL + depends on BR2_LINUX_KERNEL depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 config BR2_PACKAGE_MDIO_TOOLS From robimarko at gmail.com Thu Oct 27 09:58:02 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 11:58:02 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package In-Reply-To: <20221027115529.0ac5cb5d@windsurf> References: <20221027085628.102086-1-robimarko@gmail.com> <20221027115529.0ac5cb5d@windsurf> Message-ID: On Thu, 27 Oct 2022 at 11:55, Thomas Petazzoni wrote: > > Hello Robert, > > On Thu, 27 Oct 2022 10:56:28 +0200 > Robert Marko wrote: > > > mdio-tools are kernel module and accompanying tools for low-level > > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > > > Userspace tools provide C22 or C45 reads and writes, benchmarking > > and even dedicated Marvell Link Street tools via the included > > kernel module. > > > > Signed-off-by: Robert Marko > > Thanks, I have applied your patch, with two small changes. See below. > > > package/Config.in | 1 + > > package/mdio-tools/Config.in | 10 ++++++++++ > > package/mdio-tools/mdio-tools.hash | 3 +++ > > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > > 4 files changed, 34 insertions(+) > > The entry in the DEVELOPERS file was missing, so I've added it. > > > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > > new file mode 100644 > > index 0000000000..8a09bf19a7 > > --- /dev/null > > +++ b/package/mdio-tools/Config.in > > @@ -0,0 +1,10 @@ > > +comment "mdio-tools needs a Linux kernel to be built" > > + depends on !BR2_LINUX_KERNEL > > + > > +config BR2_PACKAGE_MDIO_TOOLS > > + bool "mdio-tools" > > + depends on BR2_LINUX_KERNEL > > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > We like to have a Config.in comment corresponding to this dependency, > so I've added it: > > +comment "mdio-tools needs a toolchain w/ headers >= 5.1" > + depends on !BR2_LINUX_KERNEL > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > And I know I realize that the depends on !BR2_LINUX_KERNEL should have > been a depends on BR2_LINUX_KERNEL. I will fix that up. Thanks for fixing it up, it is my first time contributing to Buildroot so its all a bit new to me. Regards, Robert > > Thanks for the contribution! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From baruch at tkos.co.il Thu Oct 27 10:37:17 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Thu, 27 Oct 2022 13:37:17 +0300 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 Message-ID: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses cookies from an HTTP(S) server, it accepts cookies using control codes (byte values below 32). When cookies that contain such control codes are later sent back to an HTTP(S) server, it might make the server return a 400 response. Effectively allowing a "sister site" to deny service to siblings. Drop upstream patches and autoreconf. Cc: Matt Weber Signed-off-by: Baruch Siach --- ...de-sched-h-if-available-to-fix-build.patch | 30 -------- ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- package/libcurl/libcurl.hash | 2 +- package/libcurl/libcurl.mk | 4 +- 4 files changed, 2 insertions(+), 104 deletions(-) delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch diff --git a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch b/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch deleted file mode 100644 index b5f0a8721824..000000000000 --- a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e2e7f54b7bea521fa8373095d0f43261a720cda0 Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Mon, 27 Jun 2022 08:46:21 +0200 -Subject: [PATCH] easy_lock.h: include sched.h if available to fix build - -Patched-by: Harry Sintonen - -Closes #9054 - -[Retrieved from: -https://github.com/curl/curl/commit/e2e7f54b7bea521fa8373095d0f43261a720cda0] -Signed-off-by: Fabrice Fontaine ---- - lib/easy_lock.h | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/lib/easy_lock.h b/lib/easy_lock.h -index 819f50ce815b8..1f54289ceb2d3 100644 ---- a/lib/easy_lock.h -+++ b/lib/easy_lock.h -@@ -36,6 +36,9 @@ - - #elif defined (HAVE_ATOMIC) - #include -+#if defined(HAVE_SCHED_YIELD) -+#include -+#endif - - #define curl_simple_lock atomic_bool - #define CURL_SIMPLE_LOCK_INIT false diff --git a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch b/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch deleted file mode 100644 index 083238819b1b..000000000000 --- a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch +++ /dev/null @@ -1,70 +0,0 @@ -From a68074b5db2a1fb637853b808e5b263c2ce9cbdd Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Tue, 28 Jun 2022 08:37:22 +0200 -Subject: [PATCH] configure: check for the stdatomic.h header in configure - -... and only set HAVE_ATOMIC if that header exists since we use -typedefes set in it. - -Reported-by: Ryan Schmidt -Fixes #9059 -Closes #9060 - -Signed-off-by: Baruch Siach ---- -Upstream status: commit a68074b5db2a1fb637853b808e5b263c2ce9cbdd - - m4/curl-functions.m4 | 36 +++++++++++++++++++----------------- - 1 file changed, 19 insertions(+), 17 deletions(-) - -diff --git a/m4/curl-functions.m4 b/m4/curl-functions.m4 -index ec406f56aed8..f3e12a53a9fd 100644 ---- a/m4/curl-functions.m4 -+++ b/m4/curl-functions.m4 -@@ -6570,24 +6570,26 @@ AC_DEFUN([CURL_COVERAGE],[ - ]) - - dnl CURL_ATOMIC --dnl -------------------------------------------------- --dnl Check if _Atomic works -+dnl ------------------------------------------------------------- -+dnl Check if _Atomic works. But only check if stdatomic.h exists. - dnl - AC_DEFUN([CURL_ATOMIC],[ -- AC_MSG_CHECKING([if _Atomic is available]) -- AC_COMPILE_IFELSE([ -- AC_LANG_PROGRAM([[ -- $curl_includes_unistd -- ]],[[ -- _Atomic int i = 0; -- ]]) -- ],[ -- AC_MSG_RESULT([yes]) -- AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -- [Define to 1 if you have _Atomic support.]) -- tst_atomic="yes" -- ],[ -- AC_MSG_RESULT([no]) -- tst_atomic="no" -+ AC_CHECK_HEADERS(stdatomic.h, [ -+ AC_MSG_CHECKING([if _Atomic is available]) -+ AC_COMPILE_IFELSE([ -+ AC_LANG_PROGRAM([[ -+ $curl_includes_unistd -+ ]],[[ -+ _Atomic int i = 0; -+ ]]) -+ ],[ -+ AC_MSG_RESULT([yes]) -+ AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -+ [Define to 1 if you have _Atomic support.]) -+ tst_atomic="yes" -+ ],[ -+ AC_MSG_RESULT([no]) -+ tst_atomic="no" -+ ]) - ]) - ]) --- -2.35.1 - diff --git a/package/libcurl/libcurl.hash b/package/libcurl/libcurl.hash index 672591e470bd..c0e2378cac76 100644 --- a/package/libcurl/libcurl.hash +++ b/package/libcurl/libcurl.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature # https://curl.se/download/curl-7.84.0.tar.xz.asc # signed with key 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2 -sha256 2d118b43f547bfe5bae806d8d47b4e596ea5b25a6c1f080aef49fbcd817c5db8 curl-7.84.0.tar.xz +sha256 2d61116e5f485581f6d59865377df4463f2e788677ac43222b496d4e49fb627b curl-7.86.0.tar.xz sha256 321b1a09ebc30410f2e837c072e5521cf7095b757193af4a7dae1086e36ed31a COPYING diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 9614ba514394..3c3ad082fc65 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCURL_VERSION = 7.84.0 +LIBCURL_VERSION = 7.86.0 LIBCURL_SOURCE = curl-$(LIBCURL_VERSION).tar.xz LIBCURL_SITE = https://curl.se/download LIBCURL_DEPENDENCIES = host-pkgconf \ @@ -15,8 +15,6 @@ LIBCURL_LICENSE_FILES = COPYING LIBCURL_CPE_ID_VENDOR = haxx LIBCURL_CPE_ID_PRODUCT = libcurl LIBCURL_INSTALL_STAGING = YES -# We are patching configure.ac -LIBCURL_AUTORECONF = YES # We disable NTLM support because it uses fork(), which doesn't work # on non-MMU platforms. Moreover, this authentication method is -- 2.35.1 From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:15 +0200 Subject: [Buildroot] [git commit] package/libpfm4: bump to version 4.12.0 Message-ID: <20221027104941.A02EB8734D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e75c1d888bca57076807c74b48cd01f940832e85 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Major updates: - Add IBM Power10 core PMU support - Add Intel IcelakeX core PMU support - Add Intel SapphireRapid core PMU support - Add Intel SapphireRapid RAPL PMU support - Update Intel Icelake RAPL PMU support - Add support HiSilicon Kunpeng uncore PMUs - Add support HiSilicon Kunpeng core PMU - Remove arm_fujitsu_a64fx_support for ARM(32 bit) - Update Intel Skylake event table - Add Intel PERF_METRICS event support for Icelake - Add support for ARM Neoverse N2 core PMU - Add ARM SPE events for Neoverse N1 core PMU - Add cgroup-switches software event - Add Intel Tigerlake and Rocketlake core PMU support - Add AMD64 Fam19h Zen3 L3 PMU support - Add AMD64 Fam17h Zen2 RAPL support - Add AMD64 Fam19h Zen3 core PMU support - Add RAPL for AMD64 Fam19h Zen3 processor - Update ARM N1 event table - Update AMD Fam17h Zen2 event table - s390: Update counter definition for IBM z16 https://perfmon2.sourceforge.net/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpfm4/libpfm4.hash | 6 +++--- package/libpfm4/libpfm4.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libpfm4/libpfm4.hash b/package/libpfm4/libpfm4.hash index bdc7806a7c..42740adb1e 100644 --- a/package/libpfm4/libpfm4.hash +++ b/package/libpfm4/libpfm4.hash @@ -1,6 +1,6 @@ # From http://sourceforge.net/projects/perfmon2/files/libpfm4/: -sha1 112bced9a67d565ff0ce6c2bb90452516d1183e5 libpfm-4.11.0.tar.gz -md5 4811c1d99b95752b4ba53b89a9389ec3 libpfm-4.11.0.tar.gz +sha1 4c61cfb489426d9fff15428cb8536ba0e391c8ac libpfm-4.12.0.tar.gz +md5 9e4f9b89d23171eb9314a948a51b4284 libpfm-4.12.0.tar.gz # Locally calculated -sha256 5da5f8872bde14b3634c9688d980f68bda28b510268723cc12973eedbab9fecc libpfm-4.11.0.tar.gz +sha256 4b0c1f53f39a61525b69bebf532c68040c1b984d7544a8ae0844b13cd91e1ee4 libpfm-4.12.0.tar.gz sha256 beef323d68fc5db9c67b20e8e9de7ccde371d20cdbcdd686804055b18b926d90 COPYING diff --git a/package/libpfm4/libpfm4.mk b/package/libpfm4/libpfm4.mk index 2144766d96..7165d78cd9 100644 --- a/package/libpfm4/libpfm4.mk +++ b/package/libpfm4/libpfm4.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPFM4_VERSION = 4.11.0 +LIBPFM4_VERSION = 4.12.0 LIBPFM4_SOURCE = libpfm-$(LIBPFM4_VERSION).tar.gz LIBPFM4_SITE = http://downloads.sourceforge.net/project/perfmon2/libpfm4 LIBPFM4_LICENSE = libpfm4 license From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:21 +0200 Subject: [Buildroot] [git commit] package/ksmbd-tools: bump to version 3.4.6 Message-ID: <20221027104941.AAAB78732D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=559a46ff348c73567d357e23b5458c42b8364603 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/ksmbd-tools/ksmbd-tools.hash | 2 +- package/ksmbd-tools/ksmbd-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ksmbd-tools/ksmbd-tools.hash b/package/ksmbd-tools/ksmbd-tools.hash index 589128c189..b31c66bbe7 100644 --- a/package/ksmbd-tools/ksmbd-tools.hash +++ b/package/ksmbd-tools/ksmbd-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c1b9096f37eddaced055dfc90a9ed06ceb9e8ceb608ed46c51ed5a2c901ddc81 ksmbd-tools-3.4.5.tar.gz +sha256 09ab343e9bf10ddfdd3216f400b19740a391645bf3645fa6f136b8da36306559 ksmbd-tools-3.4.6.tar.gz sha256 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de COPYING diff --git a/package/ksmbd-tools/ksmbd-tools.mk b/package/ksmbd-tools/ksmbd-tools.mk index e7f2bf91bc..c4f9c503e6 100644 --- a/package/ksmbd-tools/ksmbd-tools.mk +++ b/package/ksmbd-tools/ksmbd-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -KSMBD_TOOLS_VERSION = 3.4.5 +KSMBD_TOOLS_VERSION = 3.4.6 KSMBD_TOOLS_SITE = https://github.com/cifsd-team/ksmbd-tools/releases/download/$(KSMBD_TOOLS_VERSION) KSMBD_TOOLS_LICENSE = GPL-2.0+ KSMBD_TOOLS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:30 +0200 Subject: [Buildroot] [git commit] package/libgee: bump to version 0.20.6 Message-ID: <20221027104941.B33368734F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f69217158fc4d2af3a640b25309ae7d621fe1bd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libgee/libgee.hash | 4 ++-- package/libgee/libgee.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libgee/libgee.hash b/package/libgee/libgee.hash index 54a46f954c..ea723481e4 100644 --- a/package/libgee/libgee.hash +++ b/package/libgee/libgee.hash @@ -1,5 +1,5 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.5.sha256sum -sha256 31863a8957d5a727f9067495cabf0a0889fa5d3d44626e54094331188d5c1518 libgee-0.20.5.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.6.sha256sum +sha256 1bf834f5e10d60cc6124d74ed3c1dd38da646787fbf7872220b8b4068e476d4d libgee-0.20.6.tar.xz # Hash for license file: sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING diff --git a/package/libgee/libgee.mk b/package/libgee/libgee.mk index 7d8d3d4863..5ce56a2b3b 100644 --- a/package/libgee/libgee.mk +++ b/package/libgee/libgee.mk @@ -5,7 +5,7 @@ ################################################################################ LIBGEE_VERSION_MAJOR = 0.20 -LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).5 +LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).6 LIBGEE_SITE = http://ftp.gnome.org/pub/gnome/sources/libgee/$(LIBGEE_VERSION_MAJOR) LIBGEE_SOURCE = libgee-$(LIBGEE_VERSION).tar.xz LIBGEE_DEPENDENCIES = host-pkgconf host-vala libglib2 From Alexey.Brodkin at synopsys.com Thu Oct 27 14:10:42 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Thu, 27 Oct 2022 14:10:42 +0000 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS In-Reply-To: <20221024231423.24f384e3@windsurf> References: <20221024174911.75444-1-abrodkin@synopsys.com> <20221024231423.24f384e3@windsurf> Message-ID: Hello, Thomas! > On Mon, 24 Oct 2022 19:49:11 +0200 > Alexey Brodkin via buildroot wrote: > > > In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") > > we opted-out from unconditional linking with "-latomic" and made it > > a conditional based on real availability of __atomic_fetch_and_1() > > in the toolchain. I.e. for many targets "-latomic" was not used > > any longer. > > > > And in those supposedly rare cases when libatomic was required it was > > all OK until there's a LD_LIBRARY_PATH set with something where yet > > another libatomic.so instance exists, especially if that's the one from > > host (in my case I used a separately built host toolchain). Then we see: > > ---------------------->8-----------------------? > > /bin/sh ./libtool? --tag=CC?? --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64? -Os -g0? -Wl,-z,max-page-size=4096 -fPIC -std=gnu99??? -o numastat numastat-numastat.o? -latomic > > > > libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o? .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 > > .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format > > collect2: error: ld returned 1 exit status > > ---------------------->8-----------------------? > > > > That happens because libtool of numactl adds contents of the aforementioned > > LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it > > finds becomes the one used for linking. What's more our precios cross-built > > libatomic.so never even gets considered because that first found libatomic.so > > is used with full path, not as "-latomic" as otherwise it would have been used > > without helpful libtool. > > Thanks for the patch. However, I don't get it. Where is LD_LIBRARY_PATH > defined? I meant LD_LIBRARY_PATH is defined before Buildroot's top-level make invocation, i.e. "LD_LIBRARY_PATH=_some_location_of_hosts_libatomic.so_ make". See below. > Do you have a reproducer for this issue? Yes, I have finally. It took me a bit longer than expected to figure out all the details, thus answering that late. So there're a couple of prerequsites for the reproduction even on vanilla "numactl" sources, I used 2.0.14 with the Buildroot's libatomic patch [1]: 1. For example in my Ubuntu 20.04 on x86_64 I installed ARM cross-tools with: ----------------------------->8----------------------------- apt install gcc-9-arm-linux-gnueabi ----------------------------->8----------------------------- 2. LD_LIBRARY_PATH which points to a location of a foreign (e.g. host or some other architecture) "libatomic.so", plus (that's really important) right there side-by-side with "libatomic.so" it's important to have "libatomic.la" (valid libtool archive, and not an empty file, see below my copy which works for the reproduction). I.e. ----------------------------->8----------------------------- export LD_LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/9/ ----------------------------->8----------------------------- 3. Configure "numactl" with `lt_cv_sys_lib_search_path_spec=""`, which we exactly do in Buildroot, see [2], i.e.: ----------------------------->8----------------------------- ./configure --host=arm-linux-gnueabi lt_cv_sys_lib_search_path_spec="" ----------------------------->8----------------------------- 4. Try to build now: ----------------------------->8----------------------------- make V=1 make all-am make[1]: Entering directory 'numactl' /bin/bash ./libtool --tag=CC --mode=link arm-linux-gnueabi-gcc -g -O2 -version-info 1:0:0 -Wl,--version-script,./versions.ldscript -Wl,-init,numa_init -Wl,-fini,numa_fini -o libnuma.la -rpath /usr/local/lib libnuma.lo syscall.lo distance.lo affinity.lo sysfs.lo rtnetlink.lo -latomic libtool: warning: library '/usr/lib/gcc/x86_64-linux-gnu/9//libatomic.la' was moved. libtool: link: arm-linux-gnueabi-gcc -shared -fPIC -DPIC .libs/libnuma.o .libs/syscall.o .libs/distance.o .libs/affinity.o .libs/sysfs.o .libs/rtnetlink.o -Wl,-rpath -Wl,/usr/lib/gcc/x86_64-linux-gnu/9/ -Wl,-rpath -Wl,/usr/lib/gcc/x86_64-linux-gnu/9/ /usr/lib/gcc/x86_64-linux-gnu/9//libatomic.so -g -O2 -Wl,--version-script -Wl,./versions.ldscript -Wl,-init -Wl,numa_init -Wl,-fini -Wl,numa_fini -pthread -Wl,-soname -Wl,libnuma.so.1 -o .libs/libnuma.so.1.0.0 /usr/lib/gcc/x86_64-linux-gnu/9//libatomic.so: file not recognized: file format not recognized collect2: error: ld returned 1 exit status make[1]: *** [Makefile:889: libnuma.la] Error 1 make[1]: Leaving directory 'numactl' make: *** [Makefile:742: all] Error 2 ----------------------------->8----------------------------- So, what happens (3) removes compiler's default paths from libtool's "sys_lib_dlsearch_path", while (2) makes libtool think that libatomic.so from LD_LIBRARY_PATH is the right one. > > +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ > > +??????????????? LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" > > This is really a red flag, $(STAGING_DIR)/lib is already in the default > search path of the compiler, so that should never be needed. Well, if we don't mess with "lt_cv_sys_lib_search_path_spec" in the configure script options, then all works OK, but I guess Peter's change made in 2011 makes some sense and we don't want to revert it, or do we? Also, I accept the fact that my setup is a bit unusual at least and it might be a good enough reason to disregard all that discussion, but first I'd like to make sure we really don't care about situations like that: LD_LIBRARY_PATH pointing to a self-built toolchain. If we assume that situation as one of possible corner-cases, then probably we may want to troubleshoot such funny things which happen due to "libtool" smarts. -Alexey [1] https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 [2] https://git.buildroot.net/buildroot/commit/?id=6246704008ef219257f30a824903855d0e00cffb ----------------------------->8----------------------------- Contents of "/usr/lib/gcc/x86_64-linux-gnu/9/libatomic.la" ----------------------------->8----------------------------- # libatomic.la - a libtool library file # Generated by libtool (GNU libtool 1.3134 2009-11-29) 2.2.7a # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='libatomic.so.1' # Names of this library. library_names='libatomic.so.1.2.0 libatomic.so.1 libatomic.so' # The name of the static archive. old_library='libatomic.a' # Linker flags that can not go in dependency_libs. inherited_linker_flags=' -pthread' # Libraries that this one depends upon. dependency_libs='' # Names of additional weak libraries provided by this library weak_library_names='' # Version information for libatomic. current=3 age=2 revision=0 # Is this an already installed library? installed=yes # Should we warn about portability when linking against -modules? shouldnotlink=no # Files to dlopen/dlpreopen dlopen='' dlpreopen='' # Directory that this library needs to be installed in: libdir='/usr/lib/x86_64-linux-gnu/' ----------------------------->8----------------------------- From festevam at gmail.com Thu Oct 27 14:22:37 2022 From: festevam at gmail.com (Fabio Estevam) Date: Thu, 27 Oct 2022 11:22:37 -0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: <20221022142040.625468-1-ju.o@free.fr> References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: Hi Julien, On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: > > imx8{m,mm}pico configs are currently failing at ATF link with output: > > aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > The ATF version in those configs does not provide platform level > support for SSP. > > This build failure was introduced by commit > 09acc7cbc91f50305730ca0690a58fb93529034b > "boot/arm-trusted-firmware: fix SSP support". Before this commit, > ATF SSP was globally disabled, by default. > > This commit fixes those build issues by disabling the ATF SSP in the > defconfigs. > > Fixes: > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 > > Signed-off-by: Julien Olivain I met the same build error when trying to build kontron_bl_imx8mm_defconfig. Tried your suggestion and it fixes the build error: diff --git a/configs/kontron_bl_imx8mm_defconfig b/configs/kontron_bl_imx8mm_defconfig index ff376662e9e5..b05828981081 100644 --- a/configs/kontron_bl_imx8mm_defconfig +++ b/configs/kontron_bl_imx8mm_defconfig @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y Does this need to be fixed globally? I suspect other defconfigs face the same error. Thanks From heiko.thiery at gmail.com Thu Oct 27 14:33:58 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Thu, 27 Oct 2022 16:33:58 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: Hi, Am Do., 27. Okt. 2022 um 16:22 Uhr schrieb Fabio Estevam : > > Hi Julien, > > On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: > > > > imx8{m,mm}pico configs are currently failing at ATF link with output: > > > > aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > > > The ATF version in those configs does not provide platform level > > support for SSP. > > > > This build failure was introduced by commit > > 09acc7cbc91f50305730ca0690a58fb93529034b > > "boot/arm-trusted-firmware: fix SSP support". Before this commit, > > ATF SSP was globally disabled, by default. > > > > This commit fixes those build issues by disabling the ATF SSP in the > > defconfigs. > > > > Fixes: > > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 > > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 > > > > Signed-off-by: Julien Olivain > > I met the same build error when trying to build kontron_bl_imx8mm_defconfig. > > Tried your suggestion and it fixes the build error: > > diff --git a/configs/kontron_bl_imx8mm_defconfig > b/configs/kontron_bl_imx8mm_defconfig > index ff376662e9e5..b05828981081 100644 > --- a/configs/kontron_bl_imx8mm_defconfig > +++ b/configs/kontron_bl_imx8mm_defconfig > @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set > BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > > Does this need to be fixed globally? I suspect other defconfigs face > the same error. I see the same issue with the kontron_pitx_imx8m_defconfig. -- Heiko > > Thanks From baruch at tkos.co.il Thu Oct 27 15:21:03 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Thu, 27 Oct 2022 18:21:03 +0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: <877d0ls30z.fsf@tarshish> Hi Fabio, On Thu, Oct 27 2022, Fabio Estevam wrote: > On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: >> >> imx8{m,mm}pico configs are currently failing at ATF link with output: >> >> aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': >> (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' >> >> The ATF version in those configs does not provide platform level >> support for SSP. >> >> This build failure was introduced by commit >> 09acc7cbc91f50305730ca0690a58fb93529034b >> "boot/arm-trusted-firmware: fix SSP support". Before this commit, >> ATF SSP was globally disabled, by default. >> >> This commit fixes those build issues by disabling the ATF SSP in the >> defconfigs. >> >> Fixes: >> - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 >> - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 >> >> Signed-off-by: Julien Olivain > > I met the same build error when trying to build kontron_bl_imx8mm_defconfig. > > Tried your suggestion and it fixes the build error: > > diff --git a/configs/kontron_bl_imx8mm_defconfig > b/configs/kontron_bl_imx8mm_defconfig > index ff376662e9e5..b05828981081 100644 > --- a/configs/kontron_bl_imx8mm_defconfig > +++ b/configs/kontron_bl_imx8mm_defconfig > @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set > BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > > Does this need to be fixed globally? I suspect other defconfigs face > the same error. The global fix might be this: diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b43..a9b9bbcc5a1f 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") mentions that not all platform implement the require hook for SSP. So I think that enabling SSP by default is not the right choice. baruch -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il - From tobias at waldekranz.com Thu Oct 27 20:27:25 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 27 Oct 2022 22:27:25 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221027084900.0844e13a@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> <20221027084900.0844e13a@windsurf> Message-ID: <871qqt9fma.fsf@waldekranz.com> On tor, okt 27, 2022 at 08:49, Thomas Petazzoni via buildroot wrote: ... > Applied with those changes, thanks! Thanks for going the extra mile! Hopefully the next series won't require as much work from your end. -- Tobias From dave-git at centerclick.org Thu Oct 27 20:30:39 2022 From: dave-git at centerclick.org (David Johnson) Date: Thu, 27 Oct 2022 16:30:39 -0400 Subject: [Buildroot] [PATCH 1/1] package/tzdata: install leap-seconds.list into results Message-ID: <20221027203039.1004439-1-dave-git@centerclick.org> add leap-seconds.list to installed files so it can be used by other packages specifically, ntpd's ntp.conf can now include: leapfile /usr/share/zoneinfo/leap-seconds.list Signed-off-by: David Johnson --- package/tzdata/tzdata.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/tzdata/tzdata.mk b/package/tzdata/tzdata.mk index 21ea94ecad..7a1a77fcd9 100644 --- a/package/tzdata/tzdata.mk +++ b/package/tzdata/tzdata.mk @@ -59,7 +59,7 @@ endef define HOST_TZDATA_INSTALL_CMDS $(INSTALL) -d -m 0755 $(HOST_DIR)/share/zoneinfo - cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/share/zoneinfo + cp -a $(@D)/_output/* $(@D)/*.tab $(@D)/leap-seconds.list $(HOST_DIR)/share/zoneinfo endef $(eval $(generic-package)) -- 2.30.2 From thomas.petazzoni at bootlin.com Thu Oct 27 21:32:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 23:32:34 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <871qqt9fma.fsf@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> <20221027084900.0844e13a@windsurf> <871qqt9fma.fsf@waldekranz.com> Message-ID: <20221027233234.6ee18998@windsurf> On Thu, 27 Oct 2022 22:27:25 +0200 Tobias Waldekranz wrote: > Thanks for going the extra mile! > > Hopefully the next series won't require as much work from your end. Oh, no worries, your patch series was actually very good! There was not much to adjust before committing. Looking forward for more contributions from you! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From james.hilliard1 at gmail.com Thu Oct 27 22:48:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Thu, 27 Oct 2022 18:48:11 -0400 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221027085615.2c78028e@windsurf> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> <20221027085615.2c78028e@windsurf> Message-ID: On Thu, Oct 27, 2022 at 2:56 AM Thomas Petazzoni wrote: > > On Tue, 25 Oct 2022 08:29:29 -0600 > James Hilliard wrote: > > > Signed-off-by: James Hilliard > > --- > > package/kmod/kmod.hash | 2 +- > > package/kmod/kmod.mk | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > We have a build failure: > > http://autobuild.buildroot.net/?reason=kmod-30 > > Not sure if it's new with version 30 or not, though. Could you have a > look? It's not new, but seems somewhat rare: http://autobuild.buildroot.net/?reason=kmod-% Same failure in version 29: http://autobuild.buildroot.net/results/e5b/e5bdd8a04d845667f4234867625c3d8e482b3e21 > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com From festevam at gmail.com Fri Oct 28 03:03:59 2022 From: festevam at gmail.com (Fabio Estevam) Date: Fri, 28 Oct 2022 00:03:59 -0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: <877d0ls30z.fsf@tarshish> References: <20221022142040.625468-1-ju.o@free.fr> <877d0ls30z.fsf@tarshish> Message-ID: Hi Baruch, On Thu, Oct 27, 2022 at 12:24 PM Baruch Siach wrote: > The global fix might be this: > > diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in > index 5070849d9b43..a9b9bbcc5a1f 100644 > --- a/boot/arm-trusted-firmware/Config.in > +++ b/boot/arm-trusted-firmware/Config.in > @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN > > config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP > bool "Build with SSP" > - default y > depends on BR2_TOOLCHAIN_HAS_SSP > depends on !BR2_SSP_NONE > help > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > mentions that not all platform implement the require hook for SSP. So I > think that enabling SSP by default is not the right choice. Yes, that is a proper fix. Thanks From heiko.thiery at gmail.com Fri Oct 28 04:59:30 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Fri, 28 Oct 2022 06:59:30 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> <877d0ls30z.fsf@tarshish> Message-ID: Hi, Am Fr., 28. Okt. 2022 um 05:04 Uhr schrieb Fabio Estevam : > > Hi Baruch, > > On Thu, Oct 27, 2022 at 12:24 PM Baruch Siach wrote: > > > The global fix might be this: > > > > diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in > > index 5070849d9b43..a9b9bbcc5a1f 100644 > > --- a/boot/arm-trusted-firmware/Config.in > > +++ b/boot/arm-trusted-firmware/Config.in > > @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN > > > > config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP > > bool "Build with SSP" > > - default y > > depends on BR2_TOOLCHAIN_HAS_SSP > > depends on !BR2_SSP_NONE > > help > > > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > > mentions that not all platform implement the require hook for SSP. So I > > think that enabling SSP by default is not the right choice. > > Yes, that is a proper fix. > > Thanks I can also confirm that it works again with the change. -- Heiko From baruch at tkos.co.il Fri Oct 28 05:36:27 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Fri, 28 Oct 2022 08:36:27 +0300 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default Message-ID: SSP support requires support in ATF platform code. Not all platforms implement plat_get_stack_protector_canary() hook. The result is build failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") originally introduces this issue. But then commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid the problem by effectively disabling SSP for all platforms. So only after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP support") the issue showed up. Make SSP an opt-in for platform that actually provide the plat_get_stack_protector_canary() hook. Cc: Sergey Matyukevich Cc: Dick Olsson Tested-by: Heiko Thiery Signed-off-by: Baruch Siach --- boot/arm-trusted-firmware/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b43..a9b9bbcc5a1f 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help -- 2.35.1 From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpfm4: bump to version 4.12.0 In-Reply-To: <20221016211517.58308-1-fontaine.fabrice@gmail.com> References: <20221016211517.58308-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084439.36374fd6@windsurf> On Sun, 16 Oct 2022 23:15:17 +0200 Fabrice Fontaine wrote: > Major updates: > - Add IBM Power10 core PMU support > - Add Intel IcelakeX core PMU support > - Add Intel SapphireRapid core PMU support > - Add Intel SapphireRapid RAPL PMU support > - Update Intel Icelake RAPL PMU support > - Add support HiSilicon Kunpeng uncore PMUs > - Add support HiSilicon Kunpeng core PMU > - Remove arm_fujitsu_a64fx_support for ARM(32 bit) > - Update Intel Skylake event table > - Add Intel PERF_METRICS event support for Icelake > - Add support for ARM Neoverse N2 core PMU > - Add ARM SPE events for Neoverse N1 core PMU > - Add cgroup-switches software event > - Add Intel Tigerlake and Rocketlake core PMU support > - Add AMD64 Fam19h Zen3 L3 PMU support > - Add AMD64 Fam17h Zen2 RAPL support > - Add AMD64 Fam19h Zen3 core PMU support > - Add RAPL for AMD64 Fam19h Zen3 processor > - Update ARM N1 event table > - Update AMD Fam17h Zen2 event table > - s390: Update counter definition for IBM z16 > > https://perfmon2.sourceforge.net/ > > Signed-off-by: Fabrice Fontaine > --- > package/libpfm4/libpfm4.hash | 6 +++--- > package/libpfm4/libpfm4.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/ksmbd-tools: bump to version 3.4.6 In-Reply-To: <20221016212707.315323-1-fontaine.fabrice@gmail.com> References: <20221016212707.315323-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084448.53390494@windsurf> On Sun, 16 Oct 2022 23:27:07 +0200 Fabrice Fontaine wrote: > https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 > > Signed-off-by: Fabrice Fontaine > --- > package/ksmbd-tools/ksmbd-tools.hash | 2 +- > package/ksmbd-tools/ksmbd-tools.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/libgee: bump to version 0.20.6 In-Reply-To: <20221016212744.315519-1-fontaine.fabrice@gmail.com> References: <20221016212744.315519-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084457.7e0cd250@windsurf> On Sun, 16 Oct 2022 23:27:44 +0200 Fabrice Fontaine wrote: > https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libgee/libgee.hash | 4 ++-- > package/libgee/libgee.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:07 +0200 Subject: [Buildroot] [git commit] libcurl: security bump to version 7.86.0 Message-ID: <20221028064519.DED238734D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=400b63432ed0b0c2dee889cf4f2fed88c56a0eb5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses cookies from an HTTP(S) server, it accepts cookies using control codes (byte values below 32). When cookies that contain such control codes are later sent back to an HTTP(S) server, it might make the server return a 400 response. Effectively allowing a "sister site" to deny service to siblings. Drop upstream patches and autoreconf. Cc: Matt Weber Signed-off-by: Baruch Siach Signed-off-by: Thomas Petazzoni --- ...include-sched-h-if-available-to-fix-build.patch | 30 ---------- ...heck-for-the-stdatomic.h-header-in-config.patch | 70 ---------------------- package/libcurl/libcurl.hash | 2 +- package/libcurl/libcurl.mk | 4 +- 4 files changed, 2 insertions(+), 104 deletions(-) diff --git a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch b/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch deleted file mode 100644 index b5f0a87218..0000000000 --- a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e2e7f54b7bea521fa8373095d0f43261a720cda0 Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Mon, 27 Jun 2022 08:46:21 +0200 -Subject: [PATCH] easy_lock.h: include sched.h if available to fix build - -Patched-by: Harry Sintonen - -Closes #9054 - -[Retrieved from: -https://github.com/curl/curl/commit/e2e7f54b7bea521fa8373095d0f43261a720cda0] -Signed-off-by: Fabrice Fontaine ---- - lib/easy_lock.h | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/lib/easy_lock.h b/lib/easy_lock.h -index 819f50ce815b8..1f54289ceb2d3 100644 ---- a/lib/easy_lock.h -+++ b/lib/easy_lock.h -@@ -36,6 +36,9 @@ - - #elif defined (HAVE_ATOMIC) - #include -+#if defined(HAVE_SCHED_YIELD) -+#include -+#endif - - #define curl_simple_lock atomic_bool - #define CURL_SIMPLE_LOCK_INIT false diff --git a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch b/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch deleted file mode 100644 index 083238819b..0000000000 --- a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch +++ /dev/null @@ -1,70 +0,0 @@ -From a68074b5db2a1fb637853b808e5b263c2ce9cbdd Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Tue, 28 Jun 2022 08:37:22 +0200 -Subject: [PATCH] configure: check for the stdatomic.h header in configure - -... and only set HAVE_ATOMIC if that header exists since we use -typedefes set in it. - -Reported-by: Ryan Schmidt -Fixes #9059 -Closes #9060 - -Signed-off-by: Baruch Siach ---- -Upstream status: commit a68074b5db2a1fb637853b808e5b263c2ce9cbdd - - m4/curl-functions.m4 | 36 +++++++++++++++++++----------------- - 1 file changed, 19 insertions(+), 17 deletions(-) - -diff --git a/m4/curl-functions.m4 b/m4/curl-functions.m4 -index ec406f56aed8..f3e12a53a9fd 100644 ---- a/m4/curl-functions.m4 -+++ b/m4/curl-functions.m4 -@@ -6570,24 +6570,26 @@ AC_DEFUN([CURL_COVERAGE],[ - ]) - - dnl CURL_ATOMIC --dnl -------------------------------------------------- --dnl Check if _Atomic works -+dnl ------------------------------------------------------------- -+dnl Check if _Atomic works. But only check if stdatomic.h exists. - dnl - AC_DEFUN([CURL_ATOMIC],[ -- AC_MSG_CHECKING([if _Atomic is available]) -- AC_COMPILE_IFELSE([ -- AC_LANG_PROGRAM([[ -- $curl_includes_unistd -- ]],[[ -- _Atomic int i = 0; -- ]]) -- ],[ -- AC_MSG_RESULT([yes]) -- AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -- [Define to 1 if you have _Atomic support.]) -- tst_atomic="yes" -- ],[ -- AC_MSG_RESULT([no]) -- tst_atomic="no" -+ AC_CHECK_HEADERS(stdatomic.h, [ -+ AC_MSG_CHECKING([if _Atomic is available]) -+ AC_COMPILE_IFELSE([ -+ AC_LANG_PROGRAM([[ -+ $curl_includes_unistd -+ ]],[[ -+ _Atomic int i = 0; -+ ]]) -+ ],[ -+ AC_MSG_RESULT([yes]) -+ AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -+ [Define to 1 if you have _Atomic support.]) -+ tst_atomic="yes" -+ ],[ -+ AC_MSG_RESULT([no]) -+ tst_atomic="no" -+ ]) - ]) - ]) --- -2.35.1 - diff --git a/package/libcurl/libcurl.hash b/package/libcurl/libcurl.hash index 672591e470..c0e2378cac 100644 --- a/package/libcurl/libcurl.hash +++ b/package/libcurl/libcurl.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature # https://curl.se/download/curl-7.84.0.tar.xz.asc # signed with key 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2 -sha256 2d118b43f547bfe5bae806d8d47b4e596ea5b25a6c1f080aef49fbcd817c5db8 curl-7.84.0.tar.xz +sha256 2d61116e5f485581f6d59865377df4463f2e788677ac43222b496d4e49fb627b curl-7.86.0.tar.xz sha256 321b1a09ebc30410f2e837c072e5521cf7095b757193af4a7dae1086e36ed31a COPYING diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 9614ba5143..3c3ad082fc 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCURL_VERSION = 7.84.0 +LIBCURL_VERSION = 7.86.0 LIBCURL_SOURCE = curl-$(LIBCURL_VERSION).tar.xz LIBCURL_SITE = https://curl.se/download LIBCURL_DEPENDENCIES = host-pkgconf \ @@ -15,8 +15,6 @@ LIBCURL_LICENSE_FILES = COPYING LIBCURL_CPE_ID_VENDOR = haxx LIBCURL_CPE_ID_PRODUCT = libcurl LIBCURL_INSTALL_STAGING = YES -# We are patching configure.ac -LIBCURL_AUTORECONF = YES # We disable NTLM support because it uses fork(), which doesn't work # on non-MMU platforms. Moreover, this authentication method is From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:25 +0200 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 In-Reply-To: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> References: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Message-ID: <20221028084525.2cb0b2a0@windsurf> On Thu, 27 Oct 2022 13:37:17 +0300 Baruch Siach via buildroot wrote: > Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses > cookies from an HTTP(S) server, it accepts cookies using control codes > (byte values below 32). When cookies that contain such control codes are > later sent back to an HTTP(S) server, it might make the server return a > 400 response. Effectively allowing a "sister site" to deny service to > siblings. > > Drop upstream patches and autoreconf. > > Cc: Matt Weber > Signed-off-by: Baruch Siach > --- > ...de-sched-h-if-available-to-fix-build.patch | 30 -------- > ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- > package/libcurl/libcurl.hash | 2 +- > package/libcurl/libcurl.mk | 4 +- > 4 files changed, 2 insertions(+), 104 deletions(-) > delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch > delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:25 +0200 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 In-Reply-To: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> References: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Message-ID: <20221028084525.2cb0b2a0@windsurf> On Thu, 27 Oct 2022 13:37:17 +0300 Baruch Siach via buildroot wrote: > Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses > cookies from an HTTP(S) server, it accepts cookies using control codes > (byte values below 32). When cookies that contain such control codes are > later sent back to an HTTP(S) server, it might make the server return a > 400 response. Effectively allowing a "sister site" to deny service to > siblings. > > Drop upstream patches and autoreconf. > > Cc: Matt Weber > Signed-off-by: Baruch Siach > --- > ...de-sched-h-if-available-to-fix-build.patch | 30 -------- > ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- > package/libcurl/libcurl.hash | 2 +- > package/libcurl/libcurl.mk | 4 +- > 4 files changed, 2 insertions(+), 104 deletions(-) > delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch > delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/tzdata: install leap-seconds.list into results In-Reply-To: <20221027203039.1004439-1-dave-git@centerclick.org> References: <20221027203039.1004439-1-dave-git@centerclick.org> Message-ID: <20221028084556.2118f0d8@windsurf> On Thu, 27 Oct 2022 16:30:39 -0400 David Johnson via buildroot wrote: > add leap-seconds.list to installed files so it can be used by other packages > > specifically, ntpd's ntp.conf can now include: > leapfile /usr/share/zoneinfo/leap-seconds.list > > Signed-off-by: David Johnson > --- > package/tzdata/tzdata.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:40 +0200 Subject: [Buildroot] [git commit] package/tzdata: install leap-seconds.list into results Message-ID: <20221028064624.42ACF8739C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce2e91bdc53a1daed8ec6845a0fdb1888de87408 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master add leap-seconds.list to installed files so it can be used by other packages specifically, ntpd's ntp.conf can now include: leapfile /usr/share/zoneinfo/leap-seconds.list Signed-off-by: David Johnson Signed-off-by: Thomas Petazzoni --- package/tzdata/tzdata.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/tzdata/tzdata.mk b/package/tzdata/tzdata.mk index 21ea94ecad..7a1a77fcd9 100644 --- a/package/tzdata/tzdata.mk +++ b/package/tzdata/tzdata.mk @@ -59,7 +59,7 @@ endef define HOST_TZDATA_INSTALL_CMDS $(INSTALL) -d -m 0755 $(HOST_DIR)/share/zoneinfo - cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/share/zoneinfo + cp -a $(@D)/_output/* $(@D)/*.tab $(@D)/leap-seconds.list $(HOST_DIR)/share/zoneinfo endef $(eval $(generic-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:46:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:46:15 +0200 Subject: [Buildroot] [git commit] boot/arm-trusted-firmware: don't enable SSP by default Message-ID: <20221028064624.4BBB88739D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f03ae604510bab7f7f7e516db96a6f880dd86688 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master SSP support requires support in ATF platform code. Not all platforms implement plat_get_stack_protector_canary() hook. The result is build failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") originally introduces this issue. But then commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid the problem by effectively disabling SSP for all platforms. So only after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP support") the issue showed up. Make SSP an opt-in for platform that actually provide the plat_get_stack_protector_canary() hook. Cc: Sergey Matyukevich Cc: Dick Olsson Tested-by: Heiko Thiery Signed-off-by: Baruch Siach Signed-off-by: Thomas Petazzoni --- boot/arm-trusted-firmware/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b..a9b9bbcc5a 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help From thomas.petazzoni at bootlin.com Fri Oct 28 06:47:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:47:02 +0200 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default In-Reply-To: References: Message-ID: <20221028084702.3659ace8@windsurf> On Fri, 28 Oct 2022 08:36:27 +0300 Baruch Siach via buildroot wrote: > SSP support requires support in ATF platform code. Not all platforms > implement plat_get_stack_protector_canary() hook. The result is build > failure: > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > originally introduces this issue. But then commit ccac9a5bbbd > ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid > the problem by effectively disabling SSP for all platforms. So only > after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP > support") the issue showed up. > > Make SSP an opt-in for platform that actually provide the > plat_get_stack_protector_canary() hook. > > Cc: Sergey Matyukevich > Cc: Dick Olsson > Tested-by: Heiko Thiery > Signed-off-by: Baruch Siach > --- > boot/arm-trusted-firmware/Config.in | 1 - > 1 file changed, 1 deletion(-) We had a quick discussion with Peter Korsgaard on IRC a few days ago about this, and I do agree making this opt-in is the right solution, so I've applied. We'll see if other maintainers disagree :-) Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:47:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:47:02 +0200 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default In-Reply-To: References: Message-ID: <20221028084702.3659ace8@windsurf> On Fri, 28 Oct 2022 08:36:27 +0300 Baruch Siach via buildroot wrote: > SSP support requires support in ATF platform code. Not all platforms > implement plat_get_stack_protector_canary() hook. The result is build > failure: > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > originally introduces this issue. But then commit ccac9a5bbbd > ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid > the problem by effectively disabling SSP for all platforms. So only > after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP > support") the issue showed up. > > Make SSP an opt-in for platform that actually provide the > plat_get_stack_protector_canary() hook. > > Cc: Sergey Matyukevich > Cc: Dick Olsson > Tested-by: Heiko Thiery > Signed-off-by: Baruch Siach > --- > boot/arm-trusted-firmware/Config.in | 1 - > 1 file changed, 1 deletion(-) We had a quick discussion with Peter Korsgaard on IRC a few days ago about this, and I do agree making this opt-in is the right solution, so I've applied. We'll see if other maintainers disagree :-) Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:45 +0200 Subject: [Buildroot] [git commit] package/python-bottle: bump to version 0.12.23 Message-ID: <20221028065137.C8CED873B9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aff25f871ae4b55affa87540937e618568ea6fe0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-bottle/python-bottle.hash | 4 ++-- package/python-bottle/python-bottle.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-bottle/python-bottle.hash b/package/python-bottle/python-bottle.hash index b1cc2aac20..58bc52e3cb 100644 --- a/package/python-bottle/python-bottle.hash +++ b/package/python-bottle/python-bottle.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/bottle/json -md5 4934ad7347eef30db669ccd05283a5e0 bottle-0.12.21.tar.gz -sha256 787c61b6cc02b9c229bf2663011fac53dd8fc197f7f8ad2eeede29d888d7887e bottle-0.12.21.tar.gz +md5 d07df795cd4baa596ee803e964ba77fd bottle-0.12.23.tar.gz +sha256 683de3aa399fb26e87b274dbcf70b1a651385d459131716387abdc3792e04167 bottle-0.12.23.tar.gz # Locally computed sha256 checksums sha256 d0e7211f1c3c1a1c56f39d18bcb07f27f480c8a9552617756dda3a335933b8a6 LICENSE diff --git a/package/python-bottle/python-bottle.mk b/package/python-bottle/python-bottle.mk index ffea59f38f..e1691972c3 100644 --- a/package/python-bottle/python-bottle.mk +++ b/package/python-bottle/python-bottle.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_BOTTLE_VERSION = 0.12.21 +PYTHON_BOTTLE_VERSION = 0.12.23 PYTHON_BOTTLE_SOURCE = bottle-$(PYTHON_BOTTLE_VERSION).tar.gz -PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/95/e3/5749d7657b6fb38d65afb3c0b345514a783de7a9feb4fab594fa0bacc2a0 +PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/7c/58/75f3765b0a3f86ef0b6e0b23d0503920936752ca6e0fc27efce7403b01bd PYTHON_BOTTLE_LICENSE = MIT PYTHON_BOTTLE_LICENSE_FILES = LICENSE PYTHON_BOTTLE_CPE_ID_VENDOR = bottlepy From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:46 +0200 Subject: [Buildroot] [git commit] package/python-greenlet: bump to version 1.1.3.post0 Message-ID: <20221028065137.D280D873BA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=671af464266326fd3d2dcbfb722bf57a96b692b6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-greenlet/python-greenlet.hash | 4 ++-- package/python-greenlet/python-greenlet.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-greenlet/python-greenlet.hash b/package/python-greenlet/python-greenlet.hash index c1870c886d..8e2a95b03e 100644 --- a/package/python-greenlet/python-greenlet.hash +++ b/package/python-greenlet/python-greenlet.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/greenlet/json -md5 f424fbd9afeed575dd2ba5f0ac66e30b greenlet-1.1.2.tar.gz -sha256 e30f5ea4ae2346e62cedde8794a56858a67b878dd79f7df76a0767e356b1744a greenlet-1.1.2.tar.gz +md5 b3e86eb9ab0908e6e3ef542e9b94d7e1 greenlet-1.1.3.post0.tar.gz +sha256 f5e09dc5c6e1796969fd4b775ea1417d70e49a5df29aaa8e5d10675d9e11872c greenlet-1.1.3.post0.tar.gz # Locally computed sha256 checksums sha256 769831d6e5dfaf2c20802faccff1fafb4c2025dd8f6253dfa47fcad59d4d0979 LICENSE sha256 e5ff3c23c110e494cd7d736c10fd96d462457bafeca310840db6527298c7d46b LICENSE.PSF diff --git a/package/python-greenlet/python-greenlet.mk b/package/python-greenlet/python-greenlet.mk index 72d2747970..b4a0e5af08 100644 --- a/package/python-greenlet/python-greenlet.mk +++ b/package/python-greenlet/python-greenlet.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_GREENLET_VERSION = 1.1.2 +PYTHON_GREENLET_VERSION = 1.1.3.post0 PYTHON_GREENLET_SOURCE = greenlet-$(PYTHON_GREENLET_VERSION).tar.gz -PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/0c/10/754e21b5bea89d0e73f99d60c83754df7cc64db74f47d98ab187669ce341 +PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/ea/37/e54ce453b298e890f59dba3db32461579328a07d5b65e3eabf80f971c099 PYTHON_GREENLET_SETUP_TYPE = setuptools PYTHON_GREENLET_LICENSE = MIT, PSF-2.0 PYTHON_GREENLET_LICENSE_FILES = LICENSE LICENSE.PSF From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:48 +0200 Subject: [Buildroot] [git commit] package/python-pyzmq: bump to version 24.0.1 Message-ID: <20221028065137.E9923873BC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=488055eb58ce23e28e08b9c9a0ed72c5de9ce47e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Migrate to setuptools infrastructure. Add new host-python-packaging dependency. Refresh zmq version override patch. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- ...x-the-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++++------- package/python-pyzmq/python-pyzmq.hash | 4 +-- package/python-pyzmq/python-pyzmq.mk | 8 ++--- 3 files changed, 31 insertions(+), 18 deletions(-) diff --git a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch similarity index 55% rename from package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch rename to package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch index 315c8c8bb2..18553582f4 100644 --- a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch +++ b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch @@ -1,4 +1,8 @@ -detect.py: fix the ZMQ version check to the ZMQ version of the buildroot +From 8eae1193457f72899f9cc2254ae1489026df9bb6 Mon Sep 17 00:00:00 2001 +From: Michael Rommel +Date: Sat, 10 Aug 2013 00:44:35 +0200 +Subject: [PATCH] detect.py: fix the ZMQ version check to the ZMQ version of + the buildroot The setup.py script tries to compile a test C program and runs it, to retrieve a version string for the installed ZMQ library, but if the cross @@ -17,38 +21,47 @@ Flandrin. Modified for version 18.0.2 by Asaf Kahlon +Modified for version 24.0.1 by James Hilliard + +Signed-off-by: Michael Rommel Signed-off-by: Lionel Flandrin Signed-off-by: Asaf Kahlon +Signed-off-by: James Hilliard --- buildutils/detect.py | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/buildutils/detect.py b/buildutils/detect.py -index d1380fe..4a91351 100644 +index 842e3b14..e2eca744 100644 --- a/buildutils/detect.py +++ b/buildutils/detect.py -@@ -120,13 +120,15 @@ def detect_zmq(basedir, compiler=None, **compiler_attrs): +@@ -120,18 +120,20 @@ def detect_zmq(basedir, compiler, **compiler_attrs): cc = get_compiler(compiler=compiler, **compiler_attrs) efile = test_compilation(cfile, compiler=cc, **compiler_attrs) - patch_lib_paths(efile, cc.library_dirs) + #patch_lib_paths(efile, cc.library_dirs) -- rc, so, se = get_output_error([efile]) + # add library dirs to %PATH% for windows + env = os.environ.copy() + if sys.platform.startswith("win"): + env["PATH"] = os.pathsep.join([env["PATH"]] + cc.library_dirs) + +- rc, so, se = get_output_error([efile], env=env) - if rc: -- msg = "Error running version detection script:\n%s\n%s" % (so,se) +- msg = f"Error running version detection script:\n{so}\n{se}" - logging.error(msg) -- raise IOError(msg) -+ #rc, so, se = get_output_error([efile]) -+ # if rc: -+ # msg = "Error running version detection script:\n%s\n%s" % (so,se) +- raise OSError(msg) ++ #rc, so, se = get_output_error([efile], env=env) ++ #if rc: ++ # msg = f"Error running version detection script:\n{so}\n{se}" + # logging.error(msg) -+ # raise IOError(msg) ++ # raise OSError(msg) + + so = "vers: ##ZEROMQ_VERSION##" - handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} + handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} -- -2.20.1 +2.34.1 diff --git a/package/python-pyzmq/python-pyzmq.hash b/package/python-pyzmq/python-pyzmq.hash index ecf6489249..efbc91d83c 100644 --- a/package/python-pyzmq/python-pyzmq.hash +++ b/package/python-pyzmq/python-pyzmq.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pyzmq/json -md5 200abc1a75bdcfff7adf61304f46f55e pyzmq-19.0.2.tar.gz -sha256 296540a065c8c21b26d63e3cea2d1d57902373b16e4256afe46422691903a438 pyzmq-19.0.2.tar.gz +md5 f10b7c3dee2c03557e2c5d00b73dfc7f pyzmq-24.0.1.tar.gz +sha256 216f5d7dbb67166759e59b0479bca82b8acf9bed6015b526b8eb10143fb08e77 pyzmq-24.0.1.tar.gz # Locally computed sha256 checksums sha256 aef3b80570351d44e29c22d080d4e9e106b34f3fdbc5cdf9636994474c72b1a2 COPYING.BSD sha256 44b23767df3c0fe27f88981f09bc7f50a1695cec4b24252fa5f55f03e76bcd6d COPYING.LESSER diff --git a/package/python-pyzmq/python-pyzmq.mk b/package/python-pyzmq/python-pyzmq.mk index d1f4314a1e..5792957eaf 100644 --- a/package/python-pyzmq/python-pyzmq.mk +++ b/package/python-pyzmq/python-pyzmq.mk @@ -4,14 +4,14 @@ # ################################################################################ -PYTHON_PYZMQ_VERSION = 19.0.2 +PYTHON_PYZMQ_VERSION = 24.0.1 PYTHON_PYZMQ_SOURCE = pyzmq-$(PYTHON_PYZMQ_VERSION).tar.gz -PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/05/77/7483975d84fe1fd24cc67881ba7810e0e7b3ee6c2a0e002a5d6703cca49b +PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/46/0d/b06cf99a64d4187632f4ac9ddf6be99cd35de06fe72d75140496a8e0eef5 PYTHON_PYZMQ_LICENSE = LGPL-3.0+, BSD-3-Clause, Apache-2.0 # Apache license only online: http://www.apache.org/licenses/LICENSE-2.0 PYTHON_PYZMQ_LICENSE_FILES = COPYING.LESSER COPYING.BSD -PYTHON_PYZMQ_DEPENDENCIES = zeromq -PYTHON_PYZMQ_SETUP_TYPE = distutils +PYTHON_PYZMQ_DEPENDENCIES = host-python-packaging zeromq +PYTHON_PYZMQ_SETUP_TYPE = setuptools PYTHON_PYZMQ_BUILD_OPTS = --zmq=$(STAGING_DIR)/usr # Due to issues with cross-compiling, hardcode to the zeromq in BR From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:47 +0200 Subject: [Buildroot] [git commit] package/python-numpy: bump to version 1.23.4 Message-ID: <20221028065137.DE089873BB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32d8e23b977a5bba1f23e3821709c6aa9ff3bc55 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to date update: https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-numpy/python-numpy.hash | 8 ++++---- package/python-numpy/python-numpy.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-numpy/python-numpy.hash b/package/python-numpy/python-numpy.hash index c0dcc5d27f..2a2dec44da 100644 --- a/package/python-numpy/python-numpy.hash +++ b/package/python-numpy/python-numpy.hash @@ -1,8 +1,8 @@ -# Copied from https://github.com/numpy/numpy/releases/tag/v1.21.2 -sha256 76af194fbc117934ec5bbe2ff15177adbd05aeed23f18ee209ed88edcd777e05 numpy-1.21.2.tar.gz +# Copied from https://github.com/numpy/numpy/releases/tag/v1.23.4 +sha256 ed2cc92af0efad20198638c69bb0fc2870a58dabfba6eb722c933b48556c686c numpy-1.23.4.tar.gz # License files, locally calculated -sha256 bc1b0af15cdc9415ea26c5f1df352c226ac86425ec0fb9ab38d111018bf1c6f2 LICENSE.txt -sha256 2be6947e0432ecf7950ee8fe38681316749dd06d1de17c9ec4de6d2f55adb3a1 numpy/core/src/multiarray/dragon4.c +sha256 0f88787955e7131224f53a8c3f3e859dc502408e3a539a4dcf61fb7888b5b984 LICENSE.txt +sha256 c27d0a8026bdb8876562b720ab24d1688e3827a89f6083cd6e7e8caa9584aba3 numpy/core/src/multiarray/dragon4.c sha256 fbc539f47d0cf83bc61378080fb873d5c14630126cacbfe754035c3926daa5ec numpy/core/include/numpy/libdivide/LICENSE.txt sha256 a14cc25e10d40a3aa705b7de2fb764a6535d8ee9b2db4e1724900585457dfd55 numpy/linalg/lapack_lite/LICENSE.txt sha256 badf51c7e3e7de9c7630bd069780f5c197b846ef7660b342a1e58d5553592d8e tools/npy_tempita/license.txt diff --git a/package/python-numpy/python-numpy.mk b/package/python-numpy/python-numpy.mk index 417fe81f57..4f4848c4ba 100644 --- a/package/python-numpy/python-numpy.mk +++ b/package/python-numpy/python-numpy.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_NUMPY_VERSION = 1.21.2 +PYTHON_NUMPY_VERSION = 1.23.4 PYTHON_NUMPY_SOURCE = numpy-$(PYTHON_NUMPY_VERSION).tar.gz PYTHON_NUMPY_SITE = https://github.com/numpy/numpy/releases/download/v$(PYTHON_NUMPY_VERSION) PYTHON_NUMPY_LICENSE = BSD-3-Clause, MIT, Zlib From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-bottle: bump to version 0.12.23 In-Reply-To: <20221025223639.550839-1-james.hilliard1@gmail.com> References: <20221025223639.550839-1-james.hilliard1@gmail.com> Message-ID: <20221028085150.7aa26fdb@windsurf> On Tue, 25 Oct 2022 16:36:39 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-bottle/python-bottle.hash | 4 ++-- > package/python-bottle/python-bottle.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-greenlet: bump to version 1.1.3.post0 In-Reply-To: <20221026014052.587418-1-james.hilliard1@gmail.com> References: <20221026014052.587418-1-james.hilliard1@gmail.com> Message-ID: <20221028085154.7f29e0db@windsurf> On Tue, 25 Oct 2022 19:40:52 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-greenlet/python-greenlet.hash | 4 ++-- > package/python-greenlet/python-greenlet.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-numpy: bump to version 1.23.4 In-Reply-To: <20221026023505.616591-1-james.hilliard1@gmail.com> References: <20221026023505.616591-1-james.hilliard1@gmail.com> Message-ID: <20221028085158.483b0c09@windsurf> On Tue, 25 Oct 2022 20:35:05 -0600 James Hilliard wrote: > License hash changed due to date update: > https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 > > Signed-off-by: James Hilliard > --- > package/python-numpy/python-numpy.hash | 8 ++++---- > package/python-numpy/python-numpy.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-pyzmq: bump to version 24.0.1 In-Reply-To: <20221026031157.658391-1-james.hilliard1@gmail.com> References: <20221026031157.658391-1-james.hilliard1@gmail.com> Message-ID: <20221028085207.144e54b4@windsurf> On Tue, 25 Oct 2022 21:11:57 -0600 James Hilliard wrote: > Migrate to setuptools infrastructure. > > Add new host-python-packaging dependency. > > Refresh zmq version override patch. > > Signed-off-by: James Hilliard > --- > ...-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++------ > package/python-pyzmq/python-pyzmq.hash | 4 +- > package/python-pyzmq/python-pyzmq.mk | 8 ++-- > 3 files changed, 31 insertions(+), 18 deletions(-) > rename package/python-pyzmq/{0001-use-buildroot-zmq-version-instead-of-detect.patch => 0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch} (55%) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:47 +0200 Subject: [Buildroot] [PATCH] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 In-Reply-To: <20221023114908.505511-1-francois.perrad@gadz.org> References: <20221023114908.505511-1-francois.perrad@gadz.org> Message-ID: <20221028085247.09d8c862@windsurf> On Sun, 23 Oct 2022 13:49:08 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > package/luajit/0001-no-bin-symlink.patch | 4 ++-- > package/luajit/0002-install-inc.patch | 6 +++--- > package/luajit/luajit.hash | 2 +- > package/luajit/luajit.mk | 2 +- > 4 files changed, 7 insertions(+), 7 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:36 +0200 Subject: [Buildroot] [git commit] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 Message-ID: <20221028065344.B14C2873C2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8ab39ac65eab0e22e82b9b56a198a9abc83b5a9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/luajit/0001-no-bin-symlink.patch | 4 ++-- package/luajit/0002-install-inc.patch | 6 +++--- package/luajit/luajit.hash | 2 +- package/luajit/luajit.mk | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/package/luajit/0001-no-bin-symlink.patch b/package/luajit/0001-no-bin-symlink.patch index d32ec5ad60..dc36fa58d6 100644 --- a/package/luajit/0001-no-bin-symlink.patch +++ b/package/luajit/0001-no-bin-symlink.patch @@ -6,7 +6,7 @@ Index: b/Makefile =================================================================== --- a/Makefile +++ b/Makefile -@@ -44,8 +44,7 @@ +@@ -45,8 +45,7 @@ INSTALL_MAN= $(INSTALL_SHARE)/man/man1 INSTALL_PKGCONFIG= $(INSTALL_LIB)/pkgconfig @@ -16,7 +16,7 @@ Index: b/Makefile INSTALL_ANAME= libluajit-$(ABIVER).a INSTALL_SOSHORT1= libluajit-$(ABIVER).so INSTALL_SOSHORT2= libluajit-$(ABIVER).so.$(MAJVER) -@@ -60,7 +59,6 @@ +@@ -61,7 +60,6 @@ INSTALL_SHORT1= $(INSTALL_LIB)/$(INSTALL_SOSHORT1) INSTALL_SHORT2= $(INSTALL_LIB)/$(INSTALL_SOSHORT2) INSTALL_T= $(INSTALL_BIN)/$(INSTALL_TNAME) diff --git a/package/luajit/0002-install-inc.patch b/package/luajit/0002-install-inc.patch index 5f6547fc3f..8de777dce2 100644 --- a/package/luajit/0002-install-inc.patch +++ b/package/luajit/0002-install-inc.patch @@ -10,8 +10,8 @@ Index: b/Makefile INSTALL_BIN= $(DPREFIX)/bin INSTALL_LIB= $(DPREFIX)/$(MULTILIB) INSTALL_SHARE= $(DPREFIX)/share --INSTALL_INC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) -+INSTALL_INC= $(DPREFIX)/include +-INSTALL_DEFINC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) ++INSTALL_DEFINC= $(DPREFIX)/include + INSTALL_INC= $(INSTALL_DEFINC) INSTALL_LJLIBD= $(INSTALL_SHARE)/luajit-$(VERSION) - INSTALL_JITLIB= $(INSTALL_LJLIBD)/jit diff --git a/package/luajit/luajit.hash b/package/luajit/luajit.hash index 648d6eb181..d00cea4ee0 100644 --- a/package/luajit/luajit.hash +++ b/package/luajit/luajit.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 e0389c7669f8e455383d8f0c9d9354d44cdd1885bbf8fd0d4bcdb8fc6f794063 luajit-5677985dc1f19cf0a67112f4365c7fb79237fa16.tar.gz +sha256 19a911fdd77af69e48fa50749606a9009696f543cc88e898b4480d8d3c8828f5 luajit-6c4826f12c4d33b8b978004bc681eb1eef2be977.tar.gz # Locally calculated sha256 52fc5b15ac968ed81aabb4c1e23ab3bce50f57a5764e9cdca86b463a11072921 COPYRIGHT diff --git a/package/luajit/luajit.mk b/package/luajit/luajit.mk index 2c1e3216e1..c79f18bf62 100644 --- a/package/luajit/luajit.mk +++ b/package/luajit/luajit.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUAJIT_VERSION = 5677985dc1f19cf0a67112f4365c7fb79237fa16 +LUAJIT_VERSION = 6c4826f12c4d33b8b978004bc681eb1eef2be977 LUAJIT_SITE = $(call github,LuaJIT,LuaJIT,$(LUAJIT_VERSION)) LUAJIT_LICENSE = MIT LUAJIT_LICENSE_FILES = COPYRIGHT From thomas.petazzoni at bootlin.com Fri Oct 28 06:54:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:54:17 +0200 Subject: [Buildroot] [PATCH 1/2] package/lz4: fix LZ4_CPE_ID_VENDOR In-Reply-To: <20221023091009.18544-1-fontaine.fabrice@gmail.com> References: <20221023091009.18544-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085417.4c939fa6@windsurf> On Sun, 23 Oct 2022 11:10:08 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:yann_collet:lz4, which was added by commit > 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE > identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 > > cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 > > While at it, also drop the note added by commit > 45db4bb08e3e550db483d8745fe8aaede2fa7e98 > > Signed-off-by: Fabrice Fontaine > --- > package/lz4/lz4.mk | 8 +------- > 1 file changed, 1 insertion(+), 7 deletions(-) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:53:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:53:13 +0200 Subject: [Buildroot] [git commit] package/lz4: fix LZ4_CPE_ID_VENDOR Message-ID: <20221028065507.5E7C6873D4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ae29bb28808dbafd39d39e850820b3f063329f66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:yann_collet:lz4, which was added by commit 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 While at it, also drop the note added by commit 45db4bb08e3e550db483d8745fe8aaede2fa7e98 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lz4/lz4.mk | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 9b9b6198c3..541a03473a 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -9,13 +9,7 @@ LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING -LZ4_CPE_ID_VENDOR = yann_collet - -# CVE-2014-4715 is misclassified (by our CVE tracker) as affecting version -# 1.9.2, while in fact this issue has been fixed since lz4-r130: -# https://github.com/lz4/lz4/commit/140e6e72ddb6fc5f7cd28ce0c8ec3812ef4a9c08 -# See https://github.com/lz4/lz4/issues/818 -LZ4_IGNORE_CVES += CVE-2014-4715 +LZ4_CPE_ID_VENDOR = lz4_project # 0001-Fix-potential-memory-corruption-with-negative-memmov.patch LZ4_IGNORE_CVES += CVE-2021-3520 From thomas.petazzoni at bootlin.com Fri Oct 28 06:53:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:53:52 +0200 Subject: [Buildroot] [git commit] package/lz4: bump to version 1.9.4 Message-ID: <20221028065507.68E67873D5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1f54af8c4f814bfc0993756b82575ad581ce5318 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master LZ4 v1.9.4 is a maintenance release, featuring a substantial amount (~350 commits) of minor fixes and improvements, making it a recommended upgrade. The stable portion of liblz4 API is unmodified, making this release a drop-in replacement for existing features. - Drop patch (already in version) - Update hash of lib/LICENSE (update in year with https://github.com/lz4/lz4/commit/87a80acbe7872b9da7d56f7005ffd1b715e87c93) https://github.com/lz4/lz4/releases/tag/v1.9.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...al-memory-corruption-with-negative-memmov.patch | 26 ---------------------- package/lz4/lz4.hash | 4 ++-- package/lz4/lz4.mk | 5 +---- 3 files changed, 3 insertions(+), 32 deletions(-) diff --git a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch b/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch deleted file mode 100644 index 57e4e38f84..0000000000 --- a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8301a21773ef61656225e264f4f06ae14462bca7 Mon Sep 17 00:00:00 2001 -From: Jasper Lievisse Adriaanse -Date: Fri, 26 Feb 2021 15:21:20 +0100 -Subject: [PATCH] Fix potential memory corruption with negative memmove() size - -Signed-off-by: Peter Korsgaard ---- - lib/lz4.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/lib/lz4.c b/lib/lz4.c -index 5f524d0..c2f504e 100644 ---- a/lib/lz4.c -+++ b/lib/lz4.c -@@ -1749,7 +1749,7 @@ LZ4_decompress_generic( - const size_t dictSize /* note : = 0 if noDict */ - ) - { -- if (src == NULL) { return -1; } -+ if ((src == NULL) || (outputSize < 0)) { return -1; } - - { const BYTE* ip = (const BYTE*) src; - const BYTE* const iend = ip + srcSize; --- -2.20.1 - diff --git a/package/lz4/lz4.hash b/package/lz4/lz4.hash index 0b03089ecd..04bd118cfe 100644 --- a/package/lz4/lz4.hash +++ b/package/lz4/lz4.hash @@ -1,4 +1,4 @@ # sha256 locally computed -sha256 030644df4611007ff7dc962d981f390361e6c97a34e5cbc393ddfbe019ffe2c1 lz4-1.9.3.tar.gz -sha256 d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71 lib/LICENSE +sha256 0b0e3aa07c8c063ddf40b082bdf7e37a1562bda40a0ff5272957f3e987e0e54b lz4-1.9.4.tar.gz +sha256 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c lib/LICENSE sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 programs/COPYING diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 541a03473a..5da1ae2703 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -4,16 +4,13 @@ # ################################################################################ -LZ4_VERSION = 1.9.3 +LZ4_VERSION = 1.9.4 LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING LZ4_CPE_ID_VENDOR = lz4_project -# 0001-Fix-potential-memory-corruption-with-negative-memmov.patch -LZ4_IGNORE_CVES += CVE-2021-3520 - ifeq ($(BR2_STATIC_LIBS),y) LZ4_MAKE_OPTS += BUILD_SHARED=no else ifeq ($(BR2_SHARED_LIBS),y) From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/lv2: bump to version 1.18.10 In-Reply-To: <20221022220808.191363-1-fontaine.fabrice@gmail.com> References: <20221022220808.191363-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085545.4cb62b57@windsurf> On Sun, 23 Oct 2022 00:08:07 +0200 Fabrice Fontaine wrote: > - Update hash of COPYING (standard ISC text used since > https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) > - meson must be used since > https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab > > https://github.com/lv2/lv2/blob/v1.18.10/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/lv2/lv2.hash | 6 +++--- > package/lv2/lv2.mk | 13 ++++++------- > 2 files changed, 9 insertions(+), 10 deletions(-) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:15 +0200 Subject: [Buildroot] [git commit] package/sratom: bump to version 0.6.14 Message-ID: <20221028065611.AA11D873E8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a30e31a05e21461e73175c814ba858edb23a363e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update hash of COPYING (standard ISC licence used since https://github.com/lv2/sratom/commit/145ed2fe9756f707d9fd5f03ada5327d04e1b972) - meson must be used since https://github.com/lv2/sratom/commit/75e647def0f67647ec7ba1405e26d809a87c62fc https://github.com/lv2/sratom/blob/v0.6.14/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/sratom/sratom.hash | 6 +++--- package/sratom/sratom.mk | 12 ++++-------- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/package/sratom/sratom.hash b/package/sratom/sratom.hash index 64d460b2ea..3b8fa65300 100644 --- a/package/sratom/sratom.hash +++ b/package/sratom/sratom.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://download.drobilla.net/sratom-0.6.8.tar.bz2.asc -sha256 3acb32b1adc5a2b7facdade2e0818bcd6c71f23f84a1ebc17815bb7a0d2d02df sratom-0.6.8.tar.bz2 -sha256 3fc429d6b944fa20306357196a28bb4dd7c25e2d67edebec771f44de5bd7f9e8 COPYING +# https://download.drobilla.net/sratom-0.6.14.tar.xz.sig +sha256 9982faf40db83aedd9b3850e499fecd6852b8b4ba6dede514013655cffaca1e6 sratom-0.6.14.tar.xz +sha256 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597 COPYING diff --git a/package/sratom/sratom.mk b/package/sratom/sratom.mk index e1e0f4e033..25e7a091b3 100644 --- a/package/sratom/sratom.mk +++ b/package/sratom/sratom.mk @@ -4,18 +4,14 @@ # ################################################################################ -SRATOM_VERSION = 0.6.8 +SRATOM_VERSION = 0.6.14 SRATOM_SITE = https://download.drobilla.net -SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.bz2 +SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.xz SRATOM_LICENSE = ISC SRATOM_LICENSE_FILES = COPYING SRATOM_DEPENDENCIES = host-pkgconf lv2 serd sord SRATOM_INSTALL_STAGING = YES -SRATOM_CONF_OPTS += --no-coverage +SRATOM_CONF_OPTS += -Ddocs=disabled -Dtests=disabled -ifeq ($(BR2_STATIC_LIBS),y) -SRATOM_CONF_OPTS += --static --no-shared -endif - -$(eval $(waf-package)) +$(eval $(meson-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:03 +0200 Subject: [Buildroot] [git commit] package/libffi: bump to version 3.4.4 Message-ID: <20221028065611.B3EDE873E9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=123fa2d801ab0b9a5dd025a083c6264271d79aaf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 3.4.4 Oct-23-2022 Important aarch64 fixes, including support for linux builds with Link Time Optimization (-flto). Fix x86 stdcall stack alignment. Fix x86 Windows msvc assembler compatibility. Fix moxie and or1k small structure args. https://github.com/libffi/libffi/releases/tag/v3.4.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libffi/libffi.hash | 2 +- package/libffi/libffi.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libffi/libffi.hash b/package/libffi/libffi.hash index 689b5da4f1..8d2349ec21 100644 --- a/package/libffi/libffi.hash +++ b/package/libffi/libffi.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 4416dd92b6ae8fcb5b10421e711c4d3cb31203d77521a77d85d0102311e6c3b8 libffi-3.4.3.tar.gz +sha256 d66c56ad259a82cf2a9dfc408b32bf5da52371500b84745f7fb8b645712df676 libffi-3.4.4.tar.gz # License files, locally calculated sha256 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388 LICENSE diff --git a/package/libffi/libffi.mk b/package/libffi/libffi.mk index ecfa120c7a..8f6844113c 100644 --- a/package/libffi/libffi.mk +++ b/package/libffi/libffi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBFFI_VERSION = 3.4.3 +LIBFFI_VERSION = 3.4.4 LIBFFI_SITE = \ https://github.com/libffi/libffi/releases/download/v$(LIBFFI_VERSION) LIBFFI_LICENSE = MIT From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:04 +0200 Subject: [Buildroot] [git commit] package/lv2: bump to version 1.18.10 Message-ID: <20221028065611.9FDA7873E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5fe9ae335f8cfa5140ef5309ac931cbd3e4cf3fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update hash of COPYING (standard ISC text used since https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) - meson must be used since https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab https://github.com/lv2/lv2/blob/v1.18.10/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lv2/lv2.hash | 6 +++--- package/lv2/lv2.mk | 13 ++++++------- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/package/lv2/lv2.hash b/package/lv2/lv2.hash index ed21620bee..0814958887 100644 --- a/package/lv2/lv2.hash +++ b/package/lv2/lv2.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://lv2plug.in/spec/lv2-1.18.2.tar.bz2.asc -sha256 4e891fbc744c05855beb5dfa82e822b14917dd66e98f82b8230dbd1c7ab2e05e lv2-1.18.2.tar.bz2 -sha256 0b0b07d852e3ce7fa04986e141f73001bd7f260683968f0a19e02dbcc4131aa6 COPYING +# https://lv2plug.in/spec/lv2-1.18.10.tar.xz.sig +sha256 78c51bcf21b54e58bb6329accbb4dae03b2ed79b520f9a01e734bd9de530953f lv2-1.18.10.tar.xz +sha256 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841 COPYING diff --git a/package/lv2/lv2.mk b/package/lv2/lv2.mk index 13ffaa34b0..2dde9b907c 100644 --- a/package/lv2/lv2.mk +++ b/package/lv2/lv2.mk @@ -4,18 +4,17 @@ # ################################################################################ -LV2_VERSION = 1.18.2 +LV2_VERSION = 1.18.10 LV2_SITE = https://lv2plug.in/spec -LV2_SOURCE = lv2-$(LV2_VERSION).tar.bz2 +LV2_SOURCE = lv2-$(LV2_VERSION).tar.xz LV2_LICENSE = ISC LV2_LICENSE_FILES = COPYING LV2_DEPENDENCIES = host-pkgconf LV2_INSTALL_STAGING = YES LV2_CONF_OPTS += \ - --no-coverage \ - --no-check-links \ - --copy-headers + -Ddocs=disabled \ + -Dtests=disabled ifeq ($(BR2_PACKAGE_CAIRO),y) LV2_DEPENDENCIES += cairo @@ -30,7 +29,7 @@ LV2_DEPENDENCIES += libgtk2 endif ifeq ($(BR2_STATIC_LIBS),y) -LV2_CONF_OPTS += --no-plugins +LV2_CONF_OPTS += -Dplugins=disabled endif -$(eval $(waf-package)) +$(eval $(meson-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libffi: bump to version 3.4.4 In-Reply-To: <20221025221445.352620-1-fontaine.fabrice@gmail.com> References: <20221025221445.352620-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085619.2acac723@windsurf> On Wed, 26 Oct 2022 00:14:45 +0200 Fabrice Fontaine wrote: > 3.4.4 Oct-23-2022 > Important aarch64 fixes, including support for linux builds > with Link Time Optimization (-flto). > Fix x86 stdcall stack alignment. > Fix x86 Windows msvc assembler compatibility. > Fix moxie and or1k small structure args. > > https://github.com/libffi/libffi/releases/tag/v3.4.4 > > Signed-off-by: Fabrice Fontaine > --- > package/libffi/libffi.hash | 2 +- > package/libffi/libffi.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:57:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:57:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/empty: bump to version 0.6.22b In-Reply-To: <20221021220800.10420-1-fontaine.fabrice@gmail.com> References: <20221021220800.10420-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085711.03c25f54@windsurf> On Sat, 22 Oct 2022 00:08:00 +0200 Fabrice Fontaine wrote: > - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) > - Update hash of COPYRIGHT (update in year with > https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) > > 10.08.2022 0.6.22b > -------------------------------------------------------------------------------- > * Man pages directory parameterization > * Tarball clenup, repacking Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:57 +0200 Subject: [Buildroot] [git commit] package/empty: bump to version 0.6.22b Message-ID: <20221028065808.DFC16873F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5faa07794965a53c8122d252dd41ad4b6903eea branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) - Update hash of COPYRIGHT (update in year with https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) 10.08.2022 0.6.22b -------------------------------------------------------------------------------- * Man pages directory parameterization * Tarball clenup, repacking https://sourceforge.net/p/empty/code/ci/master/tree/CHANGELOG Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/empty/empty.hash | 4 ++-- package/empty/empty.mk | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/empty/empty.hash b/package/empty/empty.hash index c5fbc2b4ac..cc74254a7a 100644 --- a/package/empty/empty.hash +++ b/package/empty/empty.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 2fccd0faa1b3deaec1add679cbde3f34250e45872ad5df463badd4bb4edeb797 empty-0.6.21b.tgz -sha256 f01dbe3c624084900b9df1393d9062518b2bc0487acd6a3300ebd6e71352d112 COPYRIGHT +sha256 f581d560e1fa857f5304586e3c2107b5838bcf11dedcccec4a7191fa9e261b69 empty-0.6.22b.tgz +sha256 db6b65f5eaf782a92715887ac107f3477d64016301a66194a92312b13ff89be1 COPYRIGHT diff --git a/package/empty/empty.mk b/package/empty/empty.mk index a9b8080a8e..91d9476445 100644 --- a/package/empty/empty.mk +++ b/package/empty/empty.mk @@ -4,12 +4,11 @@ # ################################################################################ -EMPTY_VERSION = 0.6.21b +EMPTY_VERSION = 0.6.22b EMPTY_SOURCE = empty-$(EMPTY_VERSION).tgz EMPTY_SITE = http://downloads.sourceforge.net/project/empty/empty/empty-$(EMPTY_VERSION) EMPTY_LICENSE = BSD-3-Clause EMPTY_LICENSE_FILES = COPYRIGHT -EMPTY_STRIP_COMPONENTS = 0 define EMPTY_BUILD_CMDS $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all From thomas.petazzoni at bootlin.com Fri Oct 28 06:58:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:58:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-aiojobs: bump to version 1.1.0 In-Reply-To: <20221021190109.3411635-1-james.hilliard1@gmail.com> References: <20221021190109.3411635-1-james.hilliard1@gmail.com> Message-ID: <20221028085848.20438aa4@windsurf> On Fri, 21 Oct 2022 13:01:09 -0600 James Hilliard wrote: > Add new python-async-timeout runtime dependency. > > License hash changed due to removal of full license text: > https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 > > Signed-off-by: James Hilliard > --- > package/python-aiojobs/Config.in | 1 + > package/python-aiojobs/python-aiojobs.hash | 6 +++--- > package/python-aiojobs/python-aiojobs.mk | 6 +++--- > 3 files changed, 7 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:58:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:58:33 +0200 Subject: [Buildroot] [git commit] package/python-aiojobs: bump to version 1.1.0 Message-ID: <20221028065946.BB62E873F9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=014ec19dfe9361ea2b7bc557b73f18719d76dc17 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add new python-async-timeout runtime dependency. License hash changed due to removal of full license text: https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiojobs/Config.in | 1 + package/python-aiojobs/python-aiojobs.hash | 6 +++--- package/python-aiojobs/python-aiojobs.mk | 6 +++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/package/python-aiojobs/Config.in b/package/python-aiojobs/Config.in index 0cdd1c106f..2dc4f3f955 100644 --- a/package/python-aiojobs/Config.in +++ b/package/python-aiojobs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_PYTHON_AIOJOBS bool "python-aiojobs" + select BR2_PACKAGE_PYTHON_ASYNC_TIMEOUT # runtime help Jobs scheduler for managing background task (asyncio). diff --git a/package/python-aiojobs/python-aiojobs.hash b/package/python-aiojobs/python-aiojobs.hash index 44bf20c428..511953713b 100644 --- a/package/python-aiojobs/python-aiojobs.hash +++ b/package/python-aiojobs/python-aiojobs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiojobs/json -md5 d537fefca047067255758d7cb9e39db8 aiojobs-0.3.0.tar.gz -sha256 f6631d42dc4308f7d883abbd70d4e976f3fcc35a3ba1e8eae5d4af4940a1e0c3 aiojobs-0.3.0.tar.gz +md5 18a5b38cc13b2d59a91fdfec64588b4c aiojobs-1.1.0.tar.gz +sha256 f0c43dfc4de359052a67df309b593732c32028deef1bb787c7a363da29accde3 aiojobs-1.1.0.tar.gz # Locally computed sha256 checksums -sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE +sha256 1803dc89455114eefad3b827543343edc2452432fdac29b5edc66c8b66d4cbf3 LICENSE diff --git a/package/python-aiojobs/python-aiojobs.mk b/package/python-aiojobs/python-aiojobs.mk index 5d9a19eb8c..075d807d8b 100644 --- a/package/python-aiojobs/python-aiojobs.mk +++ b/package/python-aiojobs/python-aiojobs.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_AIOJOBS_VERSION = 0.3.0 +PYTHON_AIOJOBS_VERSION = 1.1.0 PYTHON_AIOJOBS_SOURCE = aiojobs-$(PYTHON_AIOJOBS_VERSION).tar.gz -PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/da/09/76d9c0d66d2fd1333835f110cd85f7456de7cf3f60425e3b283fba562731 -PYTHON_AIOJOBS_SETUP_TYPE = distutils +PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/99/75/b6d3678d804fffda81ebbac6214c35a4417d5ddbd70ffe7958ad951e64d2 +PYTHON_AIOJOBS_SETUP_TYPE = setuptools PYTHON_AIOJOBS_LICENSE = Apache-2.0 PYTHON_AIOJOBS_LICENSE_FILES = LICENSE From fontaine.fabrice at gmail.com Fri Oct 28 16:48:00 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 18:48:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/lz4: fix static build Message-ID: <20221028164800.16655-1-fontaine.fabrice@gmail.com> Fix the following static build failure raised since bump to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compiling dynamic library 1.9.4 /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': (.text+0x1c): undefined reference to `main' Fixes: - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 Signed-off-by: Fabrice Fontaine --- .../0001-build-Support-BUILD_SHARED-no.patch | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 package/lz4/0001-build-Support-BUILD_SHARED-no.patch diff --git a/package/lz4/0001-build-Support-BUILD_SHARED-no.patch b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch new file mode 100644 index 0000000000..d2d8639a3b --- /dev/null +++ b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch @@ -0,0 +1,42 @@ +From 5ccbd38277989ae6a728171d59ae03bad6f2f4d5 Mon Sep 17 00:00:00 2001 +From: Fotis Xenakis +Date: Tue, 13 Sep 2022 20:09:36 +0300 +Subject: [PATCH] build: Support BUILD_SHARED=no + +Since e585a438c714652e866a59371b287f52aa4d2dc3, the BUILD_SHARED +Makefile variable only takes effect for the install target (i.e. the +shared libraries always built). This restores the original behaviour. + +[Retrieved from: +https://github.com/lz4/lz4/commit/5ccbd38277989ae6a728171d59ae03bad6f2f4d5] +Signed-off-by: Fabrice Fontaine +--- + lib/Makefile | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/lib/Makefile b/lib/Makefile +index 06503cb2a..ee262c0df 100644 +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -112,17 +112,21 @@ liblz4-dll.o: liblz4-dll.rc + $(WINDRES) -i liblz4-dll.rc -o liblz4-dll.o + + $(LIBLZ4): $(SRCFILES) liblz4-dll.o ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -DLZ4_DLL_EXPORT=1 -shared $^ -o dll/$@.dll -Wl,--out-implib,dll/$(LIBLZ4_EXP) ++endif + + else # not windows + + $(LIBLZ4): $(SRCFILES) ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -shared $^ -fPIC -fvisibility=hidden $(SONAME_FLAGS) -o $@ + @echo creating versioned links + $(LN_SF) $@ liblz4.$(SHARED_EXT_MAJOR) + $(LN_SF) $@ liblz4.$(SHARED_EXT) ++endif + + endif + -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 16:57:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 18:57:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/atftp: bump to version 0.8.0 Message-ID: <20221028165748.47166-1-fontaine.fabrice@gmail.com> - No configure script in official tarball - pcre has been replaced by pcre2 since https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae https://github.com/madmartin/atftp/blob/v0.8.0/Changelog Signed-off-by: Fabrice Fontaine --- package/atftp/atftp.hash | 2 +- package/atftp/atftp.mk | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/atftp/atftp.hash b/package/atftp/atftp.hash index 6b0d9a5879..b335456f33 100644 --- a/package/atftp/atftp.hash +++ b/package/atftp/atftp.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 93c87a4fb18218414e008e01c995dadd231ba4c752d0f894b34416d1e6d3038a atftp-0.7.5.tar.gz +sha256 df2aa089c7670f9eab40e5598e5d2cb6a582dc5182926ea50b4d690e4e37f316 atftp-0.8.0.tar.gz sha256 86dc744860e6dfacfeba2f33fea908db03fe67c7e37a878285b7aae8e4596735 LICENSE diff --git a/package/atftp/atftp.mk b/package/atftp/atftp.mk index 70ef4c0fae..288501bc11 100644 --- a/package/atftp/atftp.mk +++ b/package/atftp/atftp.mk @@ -4,12 +4,14 @@ # ################################################################################ -ATFTP_VERSION = 0.7.5 +ATFTP_VERSION = 0.8.0 ATFTP_SITE = http://sourceforge.net/projects/atftp/files ATFTP_LICENSE = GPL-2.0+ ATFTP_LICENSE_FILES = LICENSE ATFTP_CPE_ID_VENDOR = atftp_project ATFTP_SELINUX_MODULES = tftp +# No configure in tarball +ATFTP_AUTORECONF = YES ATFTP_CONF_OPTS = --disable-libwrap --disable-mtftp # For static we need to explicitly link against libpthread ATFTP_LIBS = -lpthread @@ -27,8 +29,8 @@ else ATFTP_CONF_OPTS += --disable-libreadline endif -ifeq ($(BR2_PACKAGE_PCRE),y) -ATFTP_DEPENDENCIES += pcre +ifeq ($(BR2_PACKAGE_PCRE2),y) +ATFTP_DEPENDENCIES += pcre2 ATFTP_CONF_OPTS += --enable-libpcre else ATFTP_CONF_OPTS += --disable-libpcre -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 18:24:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 20:24:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/conntrack-tools: bump to version 1.4.7 Message-ID: <20221028182401.137273-1-fontaine.fabrice@gmail.com> https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt Signed-off-by: Fabrice Fontaine --- package/conntrack-tools/conntrack-tools.hash | 2 +- package/conntrack-tools/conntrack-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/conntrack-tools/conntrack-tools.hash b/package/conntrack-tools/conntrack-tools.hash index dd4fc168bc..371ede3432 100644 --- a/package/conntrack-tools/conntrack-tools.hash +++ b/package/conntrack-tools/conntrack-tools.hash @@ -1,4 +1,4 @@ # From https://netfilter.org/projects/conntrack-tools/downloads.html -sha256 590859cc848245dbfd9c6487761dd303b3a1771e007f4f42213063ca56205d5f conntrack-tools-1.4.6.tar.bz2 +sha256 099debcf57e81690ced57f516b493588a73518f48c14d656f823b29b4fc24b5d conntrack-tools-1.4.7.tar.bz2 # Locally calculated sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/conntrack-tools/conntrack-tools.mk b/package/conntrack-tools/conntrack-tools.mk index 55ea407924..ec633f0d54 100644 --- a/package/conntrack-tools/conntrack-tools.mk +++ b/package/conntrack-tools/conntrack-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -CONNTRACK_TOOLS_VERSION = 1.4.6 +CONNTRACK_TOOLS_VERSION = 1.4.7 CONNTRACK_TOOLS_SOURCE = conntrack-tools-$(CONNTRACK_TOOLS_VERSION).tar.bz2 CONNTRACK_TOOLS_SITE = http://www.netfilter.org/projects/conntrack-tools/files CONNTRACK_TOOLS_DEPENDENCIES = host-pkgconf \ -- 2.35.1 From bernd.kuhls at t-online.de Fri Oct 28 18:43:22 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 20:43:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.12 Message-ID: <20221028184322.8908-1-bernd.kuhls@t-online.de> Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 Fixes: - CVE-2022-31630: http://bugs.php.net/81739 - CVE-2022-37454: http://bugs.php.net/81738 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index c4c42a2c7d..bf81ebf3e8 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz +sha256 08243359e2204d842082269eedc15f08d2eca726d0e65b93fb11f4bfc51bbbab php-8.1.12.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 7136fd9744..a400a38af7 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.11 +PHP_VERSION = 8.1.12 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:24 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:24 +0200 Subject: [Buildroot] [PATCH 2/4] package/alsa-plugins: bump version to 1.2.7.1 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-2-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls --- package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:26 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:26 +0200 Subject: [Buildroot] [PATCH 4/4] package/alsa-utils: bump version to 1.2.8 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-4-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 which fixed UCM support, upstream however removed the UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls --- ...ay-aplay.c-make-UCM-support-optional.patch | 89 ------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) delete mode 100644 package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:25 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:25 +0200 Subject: [Buildroot] [PATCH 3/4] package/alsa-lib: bump version to 1.2.8 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-3-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls --- package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 6e474aa5e2..503dd4ddac 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:23 +0200 Subject: [Buildroot] [PATCH 1/4] package/alsa-lib: disable topology modules for static builds Message-ID: <20221028191526.122405-1-bernd.kuhls@t-online.de> With this fix to alsa-lib we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls --- package/alsa-lib/alsa-lib.mk | 1 + ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- package/alsa-utils/alsa-utils.mk | 3 -- 3 files changed, 1 insertion(+), 51 deletions(-) delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..6e474aa5e2 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -25,6 +25,7 @@ endif # Can't build with static & shared at the same time (1.0.25+) ifeq ($(BR2_STATIC_LIBS),y) ALSA_LIB_CONF_OPTS += \ + --disable-topology \ --enable-shared=no \ --without-libdl else diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:24:09 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:24:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/rsync: bump version to 3.2.7 Message-ID: <20221028192409.132447-1-bernd.kuhls@t-online.de> Release notes: https://download.samba.org/pub/rsync/NEWS Switched _SITE and package URL to https. Signed-off-by: Bernd Kuhls --- package/rsync/Config.in | 2 +- package/rsync/rsync.hash | 4 ++-- package/rsync/rsync.mk | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/rsync/Config.in b/package/rsync/Config.in index b952974efb..b572c701ec 100644 --- a/package/rsync/Config.in +++ b/package/rsync/Config.in @@ -7,4 +7,4 @@ config BR2_PACKAGE_RSYNC help File transfer program to keep remote files in sync. - http://rsync.samba.org/ + https://rsync.samba.org/ diff --git a/package/rsync/rsync.hash b/package/rsync/rsync.hash index f0ba4d321d..842b5c099f 100644 --- a/package/rsync/rsync.hash +++ b/package/rsync/rsync.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/rsync/src/rsync-3.2.5.tar.gz.asc -sha256 2ac4d21635cdf791867bc377c35ca6dda7f50d919a58be45057fd51600c69aba rsync-3.2.5.tar.gz +# https://rsync.samba.org/ftp/rsync/src/rsync-3.2.7.tar.gz.asc +sha256 4e7d9d3f6ed10878c58c5fb724a67dacf4b6aac7340b13e488fb2dc41346f2bb rsync-3.2.7.tar.gz # Locally calculated sha256 85c19ea50a224c2d0067a69c083584e5717b40b76610ec1218f91385775067dd COPYING diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b98..81ad4b9291 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -4,8 +4,8 @@ # ################################################################################ -RSYNC_VERSION = 3.2.5 -RSYNC_SITE = http://rsync.samba.org/ftp/rsync/src +RSYNC_VERSION = 3.2.7 +RSYNC_SITE = https://rsync.samba.org/ftp/rsync/src RSYNC_LICENSE = GPL-3.0+ with exceptions RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:25:46 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:25:46 +0200 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add Bernd Kuhls to package rsync Message-ID: <20221028192546.132535-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 22bb6223d5..cc645d047f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -452,6 +452,7 @@ F: package/python-pyicu/ F: package/python-pylru/ F: package/python-requests-oauthlib/ F: package/python-slob/ +F: package/rsync/ F: package/rtmpdump/ F: package/samba4/ F: package/softether/ -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 20:33:42 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 22:33:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdrm: bump version to 2.4.113 Message-ID: <20221028203342.210288-1-bernd.kuhls@t-online.de> Switch various configure options from true/false to enabled/disabled due to upstream commits: https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 Signed-off-by: Bernd Kuhls --- package/libdrm/libdrm.hash | 6 ++--- package/libdrm/libdrm.mk | 54 +++++++++++++++++++------------------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash index 082a158074..a47e169bed 100644 --- a/package/libdrm/libdrm.hash +++ b/package/libdrm/libdrm.hash @@ -1,6 +1,6 @@ -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz # Hash for license file sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk index 79d9416ef0..34bd678c5a 100644 --- a/package/libdrm/libdrm.mk +++ b/package/libdrm/libdrm.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDRM_VERSION = 2.4.112 +LIBDRM_VERSION = 2.4.113 LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz LIBDRM_SITE = https://dri.freedesktop.org/libdrm LIBDRM_LICENSE = MIT @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ host-pkgconf LIBDRM_CONF_OPTS = \ - -Dcairo-tests=false \ - -Dman-pages=false + -Dcairo-tests=disabled \ + -Dman-pages=disabled ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) LIBDRM_DEPENDENCIES += libatomic_ops @@ -27,70 +27,70 @@ endif endif ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) -LIBDRM_CONF_OPTS += -Dintel=true +LIBDRM_CONF_OPTS += -Dintel=enabled LIBDRM_DEPENDENCIES += libpciaccess else -LIBDRM_CONF_OPTS += -Dintel=false +LIBDRM_CONF_OPTS += -Dintel=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) -LIBDRM_CONF_OPTS += -Dradeon=true +LIBDRM_CONF_OPTS += -Dradeon=enabled else -LIBDRM_CONF_OPTS += -Dradeon=false +LIBDRM_CONF_OPTS += -Dradeon=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) -LIBDRM_CONF_OPTS += -Damdgpu=true +LIBDRM_CONF_OPTS += -Damdgpu=enabled else -LIBDRM_CONF_OPTS += -Damdgpu=false +LIBDRM_CONF_OPTS += -Damdgpu=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) -LIBDRM_CONF_OPTS += -Dnouveau=true +LIBDRM_CONF_OPTS += -Dnouveau=enabled else -LIBDRM_CONF_OPTS += -Dnouveau=false +LIBDRM_CONF_OPTS += -Dnouveau=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) -LIBDRM_CONF_OPTS += -Dvmwgfx=true +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled else -LIBDRM_CONF_OPTS += -Dvmwgfx=false +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) -LIBDRM_CONF_OPTS += -Domap=true +LIBDRM_CONF_OPTS += -Domap=enabled else -LIBDRM_CONF_OPTS += -Domap=false +LIBDRM_CONF_OPTS += -Domap=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) -LIBDRM_CONF_OPTS += -Detnaviv=true +LIBDRM_CONF_OPTS += -Detnaviv=enabled else -LIBDRM_CONF_OPTS += -Detnaviv=false +LIBDRM_CONF_OPTS += -Detnaviv=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) -LIBDRM_CONF_OPTS += -Dexynos=true +LIBDRM_CONF_OPTS += -Dexynos=enabled else -LIBDRM_CONF_OPTS += -Dexynos=false +LIBDRM_CONF_OPTS += -Dexynos=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) -LIBDRM_CONF_OPTS += -Dfreedreno=true +LIBDRM_CONF_OPTS += -Dfreedreno=enabled else -LIBDRM_CONF_OPTS += -Dfreedreno=false +LIBDRM_CONF_OPTS += -Dfreedreno=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) -LIBDRM_CONF_OPTS += -Dtegra=true +LIBDRM_CONF_OPTS += -Dtegra=enabled else -LIBDRM_CONF_OPTS += -Dtegra=false +LIBDRM_CONF_OPTS += -Dtegra=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) -LIBDRM_CONF_OPTS += -Dvc4=true +LIBDRM_CONF_OPTS += -Dvc4=enabled else -LIBDRM_CONF_OPTS += -Dvc4=false +LIBDRM_CONF_OPTS += -Dvc4=disabled endif ifeq ($(BR2_PACKAGE_HAS_UDEV),y) @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false endif ifeq ($(BR2_PACKAGE_VALGRIND),y) -LIBDRM_CONF_OPTS += -Dvalgrind=true +LIBDRM_CONF_OPTS += -Dvalgrind=enabled LIBDRM_DEPENDENCIES += valgrind else -LIBDRM_CONF_OPTS += -Dvalgrind=false +LIBDRM_CONF_OPTS += -Dvalgrind=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) -- 2.34.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:02:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:02:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/pinentry: bump to version 1.2.1 Message-ID: <20221028210245.41609-1-fontaine.fabrice@gmail.com> https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 Signed-off-by: Fabrice Fontaine --- package/pinentry/pinentry.hash | 4 ++-- package/pinentry/pinentry.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/pinentry/pinentry.hash b/package/pinentry/pinentry.hash index e5f3d90652..187c86f9bd 100644 --- a/package/pinentry/pinentry.hash +++ b/package/pinentry/pinentry.hash @@ -1,5 +1,5 @@ # From https://www.gnupg.org/download/integrity_check.html -sha1 b8b88cab4fd844e3616d55aeba8f084f2b98fb0f pinentry-1.1.1.tar.bz2 +sha1 29daaf45f15cb5b8ec9b4a06284343f7a87082fb pinentry-1.2.1.tar.bz2 # Locally computed -sha256 cd12a064013ed18e2ee8475e669b9f58db1b225a0144debdb85a68cecddba57f pinentry-1.1.1.tar.bz2 +sha256 457a185e5a85238fb945a955dc6352ab962dc8b48720b62fc9fa48c7540a4067 pinentry-1.2.1.tar.bz2 sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 COPYING diff --git a/package/pinentry/pinentry.mk b/package/pinentry/pinentry.mk index 5a1519479c..26b55b1366 100644 --- a/package/pinentry/pinentry.mk +++ b/package/pinentry/pinentry.mk @@ -4,7 +4,7 @@ # ################################################################################ -PINENTRY_VERSION = 1.1.1 +PINENTRY_VERSION = 1.2.1 PINENTRY_SOURCE = pinentry-$(PINENTRY_VERSION).tar.bz2 PINENTRY_SITE = https://www.gnupg.org/ftp/gcrypt/pinentry PINENTRY_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:15:46 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:15:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/pcsc-lite: bump to version 1.9.9 Message-ID: <20221028211546.220832-1-fontaine.fabrice@gmail.com> https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 Signed-off-by: Fabrice Fontaine --- package/pcsc-lite/pcsc-lite.hash | 2 +- package/pcsc-lite/pcsc-lite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pcsc-lite/pcsc-lite.hash b/package/pcsc-lite/pcsc-lite.hash index 340a9edbea..4326822e41 100644 --- a/package/pcsc-lite/pcsc-lite.hash +++ b/package/pcsc-lite/pcsc-lite.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 502d80c557ecbee285eb99fe8703eeb667bcfe067577467b50efe3420d1b2289 pcsc-lite-1.9.8.tar.bz2 +sha256 cbcc3b34c61f53291cecc0d831423c94d437b188eb2b97b7febc08de1c914e8a pcsc-lite-1.9.9.tar.bz2 sha256 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 GPL-3.0.txt diff --git a/package/pcsc-lite/pcsc-lite.mk b/package/pcsc-lite/pcsc-lite.mk index 34950dd866..0b92380ccb 100644 --- a/package/pcsc-lite/pcsc-lite.mk +++ b/package/pcsc-lite/pcsc-lite.mk @@ -4,7 +4,7 @@ # ################################################################################ -PCSC_LITE_VERSION = 1.9.8 +PCSC_LITE_VERSION = 1.9.9 PCSC_LITE_SOURCE = pcsc-lite-$(PCSC_LITE_VERSION).tar.bz2 PCSC_LITE_SITE = https://pcsclite.apdu.fr/files PCSC_LITE_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:31:27 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:31:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/slang: bump to version 2.3.3 Message-ID: <20221028213127.243377-1-fontaine.fabrice@gmail.com> Refresh patch http://lists.jedsoft.org/lists/slang-users/2022/0000005.html Signed-off-by: Fabrice Fontaine --- package/slang/0001-slsh-libs.patch | 6 ++++-- package/slang/slang.hash | 4 ++-- package/slang/slang.mk | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch index 211cb4a0e0..fad16d1b2f 100644 --- a/package/slang/0001-slsh-libs.patch +++ b/package/slang/0001-slsh-libs.patch @@ -5,6 +5,8 @@ probably Diego Petten?. Signed-off-by: Gustavo Zacarias [Bernd: rebased against 2.3.1a] Signed-off-by: Bernd Kuhls +[Fabrice: rebased against 2.3.3] +Signed-off-by: Fabrice Fontaine --- a/slsh/Makefile.in +++ b/slsh/Makefile.in @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile diff --git a/package/slang/slang.hash b/package/slang/slang.hash index 3e211ab548..563117b48a 100644 --- a/package/slang/slang.hash +++ b/package/slang/slang.hash @@ -1,6 +1,6 @@ # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 # License file, locally computed sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING diff --git a/package/slang/slang.mk b/package/slang/slang.mk index 44a0148088..e0f5968b46 100644 --- a/package/slang/slang.mk +++ b/package/slang/slang.mk @@ -4,7 +4,7 @@ # ################################################################################ -SLANG_VERSION = 2.3.2 +SLANG_VERSION = 2.3.3 SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 SLANG_SITE = http://www.jedsoft.org/releases/slang SLANG_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:48:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:48:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/sngrep: bump to version 1.6.0 Message-ID: <20221028214811.273143-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - pcre2 is an optional dependency since https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc - zlib is an optional dependency since https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog Signed-off-by: Fabrice Fontaine --- ...nssl.h-fix-build-with-libressl-3.5.0.patch | 40 ------------------- package/sngrep/sngrep.hash | 6 +-- package/sngrep/sngrep.mk | 21 +++++++--- 3 files changed, 19 insertions(+), 48 deletions(-) delete mode 100644 package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch diff --git a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch b/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch deleted file mode 100644 index 7dbb29ab00..0000000000 --- a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 29 Apr 2022 18:53:45 +0200 -Subject: [PATCH] src/capture_openssl.h: fix build with libressl >= 3.5.0 - -Fix the following build failure with libressl >= 3.5.0: - -capture_openssl.c: In function 'P_hash': -capture_openssl.c:101:18: error: storage size of 'hm' isn't known - 101 | HMAC_CTX hm; - | ^~ - -Fixes: - - http://autobuild.buildroot.org/results/f1e8cdb3ac35a30055ab79d41e6cc038e5339c37 - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/irontec/sngrep/commit/4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761] ---- - src/capture_openssl.h | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/src/capture_openssl.h b/src/capture_openssl.h -index 780de494..1f87a5cd 100644 ---- a/src/capture_openssl.h -+++ b/src/capture_openssl.h -@@ -67,10 +67,11 @@ - #endif - - /* LibreSSL declares OPENSSL_VERSION_NUMBER == 2.0 but does not include most -- * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) -+ * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) until -+ * version 3.5.0 - */ - #if defined(LIBRESSL_VERSION_NUMBER) --#define MODSSL_USE_OPENSSL_PRE_1_1_API (1) -+#define MODSSL_USE_OPENSSL_PRE_1_1_API (LIBRESSL_VERSION_NUMBER < 0x30500000L) - #else - #define MODSSL_USE_OPENSSL_PRE_1_1_API (OPENSSL_VERSION_NUMBER < 0x10100000L) - #endif diff --git a/package/sngrep/sngrep.hash b/package/sngrep/sngrep.hash index 33fa91ef5e..60a32022e6 100644 --- a/package/sngrep/sngrep.hash +++ b/package/sngrep/sngrep.hash @@ -1,6 +1,6 @@ -# From https://github.com/irontec/sngrep/releases/download/v1.4.7/sngrep-1.4.7.tar.gz.md5sum -md5 78fe753e24f36ddaf627bc2b734f45ba sngrep-1.4.7.tar.gz +# From https://github.com/irontec/sngrep/releases/download/v1.6.0/sngrep-1.6.0.tar.gz.md5sum +md5 1519ca6cd1167c0722debfb96e2ac173 sngrep-1.6.0.tar.gz # Locally computed -sha256 3c96aadd8b8c6b7adb5552d6fb4234f2000f15109b0f6c5feb632c81306cc49b sngrep-1.4.7.tar.gz +sha256 fd80964d6560f2ff57b4f5bef2353d1a6f7c48d2f1a5f0a167c854bd2e801999 sngrep-1.6.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk index 841a7bb991..7b614f1770 100644 --- a/package/sngrep/sngrep.mk +++ b/package/sngrep/sngrep.mk @@ -4,8 +4,9 @@ # ################################################################################ -SNGREP_VERSION = 1.4.7 -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) +SNGREP_VERSION = 1.6.0 +SNGREP_SITE = \ + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) SNGREP_LICENSE = GPL-3.0+ SNGREP_LICENSE_FILES = LICENSE SNGREP_AUTORECONF = YES @@ -29,11 +30,21 @@ else SNGREP_CONF_OPTS += --without-gnutls --without-openssl endif -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) +SNGREP_DEPENDENCIES += pcre2 +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 +else ifeq ($(BR2_PACKAGE_PCRE),y) SNGREP_DEPENDENCIES += pcre -SNGREP_CONF_OPTS += --with-pcre +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 else -SNGREP_CONF_OPTS += --without-pcre +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 +endif + +ifeq ($(BR2_PACKAGE_ZLIB),y) +SNGREP_DEPENDENCIES += zlib +SNGREP_CONF_OPTS += --with-zlib +else +SNGREP_CONF_OPTS += --without-zlib endif $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:53:25 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:53:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/smartmontools: bump to version 7.3 Message-ID: <20221028215325.278206-1-fontaine.fabrice@gmail.com> https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 Signed-off-by: Fabrice Fontaine --- package/smartmontools/smartmontools.hash | 8 ++++---- package/smartmontools/smartmontools.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash index 3c5535b29a..e48e955d01 100644 --- a/package/smartmontools/smartmontools.hash +++ b/package/smartmontools/smartmontools.hash @@ -1,7 +1,7 @@ -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz # Locally computed -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk index 2e2bbcd4e2..d24f008df4 100644 --- a/package/smartmontools/smartmontools.mk +++ b/package/smartmontools/smartmontools.mk @@ -4,7 +4,7 @@ # ################################################################################ -SMARTMONTOOLS_VERSION = 7.2 +SMARTMONTOOLS_VERSION = 7.3 SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) SMARTMONTOOLS_LICENSE = GPL-2.0+ SMARTMONTOOLS_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 22:02:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 00:02:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/taglib: bump to version 1.13 Message-ID: <20221028220223.286949-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Use WITH_ZLIB which is available since https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e https://github.com/taglib/taglib/releases/tag/v1.13 Signed-off-by: Fabrice Fontaine --- ...e-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ------------------- package/taglib/taglib.hash | 2 +- package/taglib/taglib.mk | 5 ++- 3 files changed, 5 insertions(+), 36 deletions(-) delete mode 100644 package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch deleted file mode 100644 index d8af73cb08..0000000000 --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 -From: Oleg Antonyan -Date: Thu, 13 May 2021 16:41:35 +0200 -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= - =?UTF-8?q?=201.12=20(#1012)?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -* fix error: duplicate volatile - -* fix volatile ATOMIC_INT in constructor - -[Retrieved from: -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] -Signed-off-by: Fabrice Fontaine ---- - taglib/toolkit/trefcounter.cpp | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp -index 18cb596c0..5b089abf9 100644 ---- a/taglib/toolkit/trefcounter.cpp -+++ b/taglib/toolkit/trefcounter.cpp -@@ -52,7 +52,7 @@ - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) - #else --# define ATOMIC_INT volatile int -+# define ATOMIC_INT int - # define ATOMIC_INC(x) (++x) - # define ATOMIC_DEC(x) (--x) - #endif diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash index 38a44b41a5..7d1b2e8422 100644 --- a/package/taglib/taglib.hash +++ b/package/taglib/taglib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk index 9513e0d0e1..c687891002 100644 --- a/package/taglib/taglib.mk +++ b/package/taglib/taglib.mk @@ -4,7 +4,7 @@ # ################################################################################ -TAGLIB_VERSION = 1.12 +TAGLIB_VERSION = 1.13 TAGLIB_SITE = http://taglib.github.io/releases TAGLIB_INSTALL_STAGING = YES TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib ifeq ($(BR2_PACKAGE_ZLIB),y) TAGLIB_DEPENDENCIES += zlib +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON +else +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF endif define TAGLIB_REMOVE_DEVFILE -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 28 22:38:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 16:38:44 -0600 Subject: [Buildroot] [PATCH 1/1] package/gcc: ensure __register_frame is optimized out for glibc Message-ID: <20221028223844.1180418-1-james.hilliard1@gmail.com> On some architectures when building with -O0 the __register_frame symbol fails to get optimized out which can cause linking failures when building glibc. To fix this set -O1 for GCC target libs when building with glibc and BR2_OPTIMIZE_0 on the problematic target architectures. Fixes: - http://autobuild.buildroot.net/results/89b/89b6c6924240b7cf82035a844f3573673e91b364 - http://autobuild.buildroot.net/results/46f/46f4ec99d2b23d354a4bb5e92123d64f0da6ed27 - http://autobuild.buildroot.net/results/839/839f929f700cf181ebdf34389c7806a96f55813e - http://autobuild.buildroot.net/results/0e2/0e202bf53a683930f3cad6edef2a4dea629eaecb - http://autobuild.buildroot.net/results/8a8/8a8c917f597fdcca744e696e19e9300b64004335 - http://autobuild.buildroot.net/results/c05/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 - http://autobuild.buildroot.net/results/8ba/8ba8882a861cf7df359c23969c09b2be0725b2e5 Signed-off-by: James Hilliard --- package/gcc/gcc.mk | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/package/gcc/gcc.mk b/package/gcc/gcc.mk index ec6f3b550a..a339f77970 100644 --- a/package/gcc/gcc.mk +++ b/package/gcc/gcc.mk @@ -103,6 +103,15 @@ GCC_COMMON_TARGET_CFLAGS += -matomic GCC_COMMON_TARGET_CXXFLAGS += -matomic endif +# Enable GCC target libs optimizations to optimize out __register_frame +# when needed for some architectures when building with glibc. +ifeq ($(BR2_TOOLCHAIN_USES_GLIBC)$(BR2_OPTIMIZE_0),yy) +ifeq ($(BR2_microblazebe)$(BR2_microblazeel)$(BR2_mips)$(BR2_mipsel)$(BR2_nios2)$(BR2_or1k)$(BR2_sh),y) +GCC_COMMON_TARGET_CFLAGS += -O1 +GCC_COMMON_TARGET_CXXFLAGS += -O1 +endif +endif + # Propagate options used for target software building to GCC target libs HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)" HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)" -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 00:04:37 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 18:04:37 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiohttp-session: bump to version 2.12.0 Message-ID: <20221029000437.1305667-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiohttp-session/python-aiohttp-session.hash b/package/python-aiohttp-session/python-aiohttp-session.hash index 8b44318307..efdac39007 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.hash +++ b/package/python-aiohttp-session/python-aiohttp-session.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiohttp-session/json -md5 797273eb5f0ef9e95fa92c6a933cf4ad aiohttp-session-2.11.0.tar.gz -sha256 0fdf39600f6a05c4943ef6c7b099071ca9854413111a26761626244be5015dc4 aiohttp-session-2.11.0.tar.gz +md5 b89bde69f6f3c61a991ff408d2733838 aiohttp-session-2.12.0.tar.gz +sha256 0ccd11a7c77cb9e5a61f4daacdc9170d561112f9cfaf9e9a2d9867c0587d1950 aiohttp-session-2.12.0.tar.gz # Locally computed sha256 checksums sha256 7bc5dd2f229a6b922befb1427fd4ad2c0b255f12c1b1869370ba77520dc22bc7 LICENSE diff --git a/package/python-aiohttp-session/python-aiohttp-session.mk b/package/python-aiohttp-session/python-aiohttp-session.mk index 3d59b75e3d..55bf0e87f3 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.mk +++ b/package/python-aiohttp-session/python-aiohttp-session.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOHTTP_SESSION_VERSION = 2.11.0 +PYTHON_AIOHTTP_SESSION_VERSION = 2.12.0 PYTHON_AIOHTTP_SESSION_SOURCE = aiohttp-session-$(PYTHON_AIOHTTP_SESSION_VERSION).tar.gz -PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/3b/a7/0b97b9a2e3a553a86a6703f86b0e9b1afb2b262849700e8f80015c0f643f +PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/34/87/8dbc1385c875497d6bc16c9d94e25dbd8ff62599843b73fb4048ba74c867 PYTHON_AIOHTTP_SESSION_SETUP_TYPE = setuptools PYTHON_AIOHTTP_SESSION_LICENSE = Apache-2.0 PYTHON_AIOHTTP_SESSION_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 00:19:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 18:19:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-typing-extensions: bump to version 4.4.0 Message-ID: <20221029001917.1312839-1-james.hilliard1@gmail.com> License hash changed due to date/formatting updates: https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f Signed-off-by: James Hilliard --- .../python-typing-extensions/python-typing-extensions.hash | 6 +++--- .../python-typing-extensions/python-typing-extensions.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-typing-extensions/python-typing-extensions.hash b/package/python-typing-extensions/python-typing-extensions.hash index 2512ed042d..249bb63a42 100644 --- a/package/python-typing-extensions/python-typing-extensions.hash +++ b/package/python-typing-extensions/python-typing-extensions.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/typing_extensions/json -md5 30ff8c89459dd93970a92a90b0386aba typing_extensions-4.3.0.tar.gz -sha256 e6d2677a32f47fc7eb2795db1dd15c1f34eff616bcaf2cfb5e997f854fa1c4a6 typing_extensions-4.3.0.tar.gz +md5 5cfcb56ea6fc4972c3600c0030f4d136 typing_extensions-4.4.0.tar.gz +sha256 1511434bb92bf8dd198c12b1cc812e800d4181cfcb867674e0f8279cc93087aa typing_extensions-4.4.0.tar.gz # Locally computed sha256 checksums -sha256 ff17ce94e102024deb68773eb1cc74ca76da4e658f373531f0ac22d68a6bb1ad LICENSE +sha256 c7afb65e755707b9fb90487389a176d3ed3d0031d5131afde45c23715ff5e891 LICENSE diff --git a/package/python-typing-extensions/python-typing-extensions.mk b/package/python-typing-extensions/python-typing-extensions.mk index 2b8c23f354..fd7d0bd93a 100644 --- a/package/python-typing-extensions/python-typing-extensions.mk +++ b/package/python-typing-extensions/python-typing-extensions.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TYPING_EXTENSIONS_VERSION = 4.3.0 +PYTHON_TYPING_EXTENSIONS_VERSION = 4.4.0 PYTHON_TYPING_EXTENSIONS_SOURCE = typing_extensions-$(PYTHON_TYPING_EXTENSIONS_VERSION).tar.gz -PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/9e/1d/d128169ff58c501059330f1ad96ed62b79114a2eb30b8238af63a2e27f70 +PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/e3/a7/8f4e456ef0adac43f452efc2d0e4b242ab831297f1bac60ac815d37eb9cf PYTHON_TYPING_EXTENSIONS_SETUP_TYPE = flit PYTHON_TYPING_EXTENSIONS_LICENSE = Python-2.0 PYTHON_TYPING_EXTENSIONS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:42:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:42:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-tinycss2: bump to version 1.2.1 Message-ID: <20221029014217.1408835-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-tinycss2/python-tinycss2.hash | 4 ++-- package/python-tinycss2/python-tinycss2.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-tinycss2/python-tinycss2.hash b/package/python-tinycss2/python-tinycss2.hash index e8e1d93f83..f9b638df6c 100644 --- a/package/python-tinycss2/python-tinycss2.hash +++ b/package/python-tinycss2/python-tinycss2.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/tinycss2/json -md5 60272f58f8d5834b2e09ffbc9bd5de53 tinycss2-1.1.1.tar.gz -sha256 b2e44dd8883c360c35dd0d1b5aad0b610e5156c2cb3b33434634e539ead9d8bf tinycss2-1.1.1.tar.gz +md5 e8a06102e7f42ca791463f11ce7b814d tinycss2-1.2.1.tar.gz +sha256 8cff3a8f066c2ec677c06dbc7b45619804a6938478d9d73c284b29d14ecb0627 tinycss2-1.2.1.tar.gz # Locally computed sha256 checksums sha256 6b94acee20ec9f2709333134f3ba70322535fb420af0ce8c1455d9cbe297f1d5 LICENSE diff --git a/package/python-tinycss2/python-tinycss2.mk b/package/python-tinycss2/python-tinycss2.mk index e4fc5dc9c5..de26639587 100644 --- a/package/python-tinycss2/python-tinycss2.mk +++ b/package/python-tinycss2/python-tinycss2.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TINYCSS2_VERSION = 1.1.1 +PYTHON_TINYCSS2_VERSION = 1.2.1 PYTHON_TINYCSS2_SOURCE = tinycss2-$(PYTHON_TINYCSS2_VERSION).tar.gz -PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/1e/5a/576828164b5486f319c4323915b915a8af3fa4a654bbb6f8fc8e87b5cb17 +PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/75/be/24179dfaa1d742c9365cbd0e3f0edc5d3aa3abad415a2327c5a6ff8ca077 PYTHON_TINYCSS2_SETUP_TYPE = flit PYTHON_TINYCSS2_LICENSE = BSD-3-Clause PYTHON_TINYCSS2_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:20:20 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:20:20 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-attrs: bump to version 22.1.0 Message-ID: <20221029012020.1396608-1-james.hilliard1@gmail.com> License hash changed due to ownership clarification: https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 Signed-off-by: James Hilliard --- package/python-attrs/python-attrs.hash | 6 +++--- package/python-attrs/python-attrs.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-attrs/python-attrs.hash b/package/python-attrs/python-attrs.hash index 823a9459bd..d5548c0ed3 100644 --- a/package/python-attrs/python-attrs.hash +++ b/package/python-attrs/python-attrs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/attrs/json -md5 5a9b5e9ceebc380a13fb93235b11bbda attrs-21.4.0.tar.gz -sha256 626ba8234211db98e869df76230a137c4c40a12d72445c45d5f5b716f076e2fd attrs-21.4.0.tar.gz +md5 0487081b7ead8753fc46cf7c6d1e28e3 attrs-22.1.0.tar.gz +sha256 29adc2665447e5191d0e7c568fde78b21f9672d344281d0c6e1ab085429b22b6 attrs-22.1.0.tar.gz # Locally computed sha256 checksums -sha256 bf659a28b49240602f56bbdf490cbe2ec509b15b98f99d7b19a52c740e327863 LICENSE +sha256 882115c95dfc2af1eeb6714f8ec6d5cbcabf667caff8729f42420da63f714e9f LICENSE diff --git a/package/python-attrs/python-attrs.mk b/package/python-attrs/python-attrs.mk index 4877d62285..33651ee80a 100644 --- a/package/python-attrs/python-attrs.mk +++ b/package/python-attrs/python-attrs.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ATTRS_VERSION = 21.4.0 +PYTHON_ATTRS_VERSION = 22.1.0 PYTHON_ATTRS_SOURCE = attrs-$(PYTHON_ATTRS_VERSION).tar.gz -PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/d7/77/ebb15fc26d0f815839ecd897b919ed6d85c050feeb83e100e020df9153d2 +PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/1a/cb/c4ffeb41e7137b23755a45e1bfec9cbb76ecf51874c6f1d113984ecaa32c PYTHON_ATTRS_SETUP_TYPE = setuptools PYTHON_ATTRS_LICENSE = MIT PYTHON_ATTRS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:27:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:27:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-charset-normalizer: bump to version 3.0.0 Message-ID: <20221029012704.1399837-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- .../python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- .../python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-charset-normalizer/python-charset-normalizer.hash b/package/python-charset-normalizer/python-charset-normalizer.hash index 3d50b2872d..32d8a22e66 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.hash +++ b/package/python-charset-normalizer/python-charset-normalizer.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/charset-normalizer/json -md5 a70f9fc85b6b8265c982eca6fe51381f charset-normalizer-2.1.1.tar.gz -sha256 5a3d016c7c547f69d6f81fb0db9449ce888b418b5b9952cc5e6e66843e9dd845 charset-normalizer-2.1.1.tar.gz +md5 169527085be8e6bb7874164c24481eca charset-normalizer-3.0.0.tar.gz +sha256 b27d10ad15740b45fd55f76e6901a4391e6dca3917ef48ecdcf17edf6e00d770 charset-normalizer-3.0.0.tar.gz # Locally computed sha256 checksums sha256 eb31a0c5a4fb09b8a4e32055d25c1e5f9c358a2752fef3cd720213d1ccfee241 LICENSE diff --git a/package/python-charset-normalizer/python-charset-normalizer.mk b/package/python-charset-normalizer/python-charset-normalizer.mk index 72728a25b3..b2c42a74b8 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.mk +++ b/package/python-charset-normalizer/python-charset-normalizer.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CHARSET_NORMALIZER_VERSION = 2.1.1 +PYTHON_CHARSET_NORMALIZER_VERSION = 3.0.0 PYTHON_CHARSET_NORMALIZER_SOURCE = charset-normalizer-$(PYTHON_CHARSET_NORMALIZER_VERSION).tar.gz -PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/a1/34/44964211e5410b051e4b8d2869c470ae8a68ae274953b1c7de6d98bbcf94 +PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/fe/77/6d5d367b7cfee812a88573e80bbe25cea2d015ed2c3490e4464951ff3232 PYTHON_CHARSET_NORMALIZER_SETUP_TYPE = setuptools PYTHON_CHARSET_NORMALIZER_LICENSE = MIT PYTHON_CHARSET_NORMALIZER_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:06:12 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:06:12 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-weasyprint: bump to version 57.0 Message-ID: <20221029010612.1391444-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-weasyprint/python-weasyprint.hash | 4 ++-- package/python-weasyprint/python-weasyprint.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-weasyprint/python-weasyprint.hash b/package/python-weasyprint/python-weasyprint.hash index 68b895361b..21e58d3677 100644 --- a/package/python-weasyprint/python-weasyprint.hash +++ b/package/python-weasyprint/python-weasyprint.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/weasyprint/json -md5 0a339942d1d238aa0b974c1ec1580c03 weasyprint-56.1.tar.gz -sha256 27f796abce8edebc9e5b3cff2d095a9fa2b0af5766801431659db51203c70b38 weasyprint-56.1.tar.gz +md5 b270213554d781c86b6c3d390b097f2f weasyprint-57.0.tar.gz +sha256 7b6f5cc13819e9a7d8748c1dbf0e8d2444f7a4818a98339f82dccaa822bf911b weasyprint-57.0.tar.gz # Locally computed sha256 checksums sha256 bfd14eccfa6100575460e685556b183399d4bd335904e3c9521b0116d21c54da LICENSE diff --git a/package/python-weasyprint/python-weasyprint.mk b/package/python-weasyprint/python-weasyprint.mk index aff9a31a43..9dd364e1c1 100644 --- a/package/python-weasyprint/python-weasyprint.mk +++ b/package/python-weasyprint/python-weasyprint.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WEASYPRINT_VERSION = 56.1 +PYTHON_WEASYPRINT_VERSION = 57.0 PYTHON_WEASYPRINT_SOURCE = weasyprint-$(PYTHON_WEASYPRINT_VERSION).tar.gz -PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/30/2c/9c29989bf03bb573bd963c2cf167839099bdaff05aff1f0eff2ccbd1b509 +PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/b7/98/cd0df64b306ac901ffd53c50d9d5d79d92cae756b6469fc14771adb39d77 PYTHON_WEASYPRINT_SETUP_TYPE = flit PYTHON_WEASYPRINT_LICENSE = BSD-3-Clause PYTHON_WEASYPRINT_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:23:21 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:23:21 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-certifi: bump to version 2022.9.24 Message-ID: <20221029012321.1398031-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-certifi/python-certifi.hash | 4 ++-- package/python-certifi/python-certifi.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-certifi/python-certifi.hash b/package/python-certifi/python-certifi.hash index ac3d0a909b..0557a5c97c 100644 --- a/package/python-certifi/python-certifi.hash +++ b/package/python-certifi/python-certifi.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/certifi/json -md5 f919a230b999ebae1969088ca68e8367 certifi-2022.9.14.tar.gz -sha256 36973885b9542e6bd01dea287b2b4b3b21236307c56324fcc3f1160f2d655ed5 certifi-2022.9.14.tar.gz +md5 ff9c8d5c7e7fb083de6b874609c5ca68 certifi-2022.9.24.tar.gz +sha256 0d9c601124e5a6ba9712dbc60d9c53c21e34f5f641fe83002317394311bdce14 certifi-2022.9.24.tar.gz # Locally computed sha256 checksums sha256 a02f6c638f9fb84d06f7764c3ab085d8af7eda5b93c166da54312479077c6fb0 LICENSE diff --git a/package/python-certifi/python-certifi.mk b/package/python-certifi/python-certifi.mk index 2053d5e820..8e2435199f 100644 --- a/package/python-certifi/python-certifi.mk +++ b/package/python-certifi/python-certifi.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CERTIFI_VERSION = 2022.9.14 +PYTHON_CERTIFI_VERSION = 2022.9.24 PYTHON_CERTIFI_SOURCE = certifi-$(PYTHON_CERTIFI_VERSION).tar.gz -PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/ca/48/88ec470f8b68319b6782ca3a0570789886ad5ca24c1af2f3771699135baa +PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/cb/a4/7de7cd59e429bd0ee6521ba58a75adaec136d32f91a761b28a11d8088d44 PYTHON_CERTIFI_SETUP_TYPE = setuptools PYTHON_CERTIFI_LICENSE = ISC (Python code), MPL-2.0 (cacert.pem) PYTHON_CERTIFI_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:33:21 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:33:21 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-cssutils: bump to version 2.6.0 Message-ID: <20221029013321.1403408-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-cssutils/python-cssutils.hash | 4 ++-- package/python-cssutils/python-cssutils.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-cssutils/python-cssutils.hash b/package/python-cssutils/python-cssutils.hash index a3d2a6be6c..cb989131a3 100644 --- a/package/python-cssutils/python-cssutils.hash +++ b/package/python-cssutils/python-cssutils.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/cssutils/json -md5 974bf7f07d52f92dd29485b6e7529aac cssutils-2.5.1.tar.gz -sha256 b4a4da58e78326ec9f4a9d3555004ddf706f3e99f7a1026c1880f0934362b8b4 cssutils-2.5.1.tar.gz +md5 b01ea364e79eada181c3ae46d69249af cssutils-2.6.0.tar.gz +sha256 f7dcd23c1cec909fdf3630de346e1413b7b2555936dec14ba2ebb9913bf0818e cssutils-2.6.0.tar.gz # Locally computed sha256 checksums sha256 03c570a068086ee577dcd795519ea93462b2ed2fcb6dcc4dfce56a71a2fd6e5a COPYING.LESSER diff --git a/package/python-cssutils/python-cssutils.mk b/package/python-cssutils/python-cssutils.mk index 3acf26b3d5..fff9e393f3 100644 --- a/package/python-cssutils/python-cssutils.mk +++ b/package/python-cssutils/python-cssutils.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CSSUTILS_VERSION = 2.5.1 +PYTHON_CSSUTILS_VERSION = 2.6.0 PYTHON_CSSUTILS_SOURCE = cssutils-$(PYTHON_CSSUTILS_VERSION).tar.gz -PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/bd/f0/d3a02af54f292fe9d1f6bb18c7d2f79992b5cbae0db1ee91e5c73a3c7d7c +PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/43/d5/505d96b7456fd334f8b963c05bd9425dacd317e209bb9adf103613339325 PYTHON_CSSUTILS_LICENSE = LGPL-3.0+ PYTHON_CSSUTILS_LICENSE_FILES = COPYING.LESSER PYTHON_CSSUTILS_SETUP_TYPE = setuptools -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:37:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:37:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-fonttools: bump to version 4.38.0 Message-ID: <20221029013717.1406350-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-fonttools/python-fonttools.hash | 4 ++-- package/python-fonttools/python-fonttools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-fonttools/python-fonttools.hash b/package/python-fonttools/python-fonttools.hash index 58603f79a4..4b4751dc82 100644 --- a/package/python-fonttools/python-fonttools.hash +++ b/package/python-fonttools/python-fonttools.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/fonttools/json -md5 6cad81799e0491751cda0a98642b00eb fonttools-4.37.3.zip -sha256 f32ef6ec966cf0e7d2aa88601fed2e3a8f2851c26b5db2c80ccc8f82bee4eedc fonttools-4.37.3.zip +md5 f4775967d29b0da2f29ba499eed34f88 fonttools-4.38.0.zip +sha256 2bb244009f9bf3fa100fc3ead6aeb99febe5985fa20afbfbaa2f8946c2fbdaf1 fonttools-4.38.0.zip # Locally computed sha256 checksums sha256 6787208f83f659ccbc2223b2fde952ffa6f7e8aca62f1a8a2bf5bc51bb1b2383 LICENSE diff --git a/package/python-fonttools/python-fonttools.mk b/package/python-fonttools/python-fonttools.mk index aad1765899..d31d3a2889 100644 --- a/package/python-fonttools/python-fonttools.mk +++ b/package/python-fonttools/python-fonttools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FONTTOOLS_VERSION = 4.37.3 +PYTHON_FONTTOOLS_VERSION = 4.38.0 PYTHON_FONTTOOLS_SOURCE = fonttools-$(PYTHON_FONTTOOLS_VERSION).zip -PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/c1/0d/d41b9c2295e1896f4c89e6b213790eee8e8e641b3e9709518f2bddcdeffa +PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/55/5c/a4a25cf6db42d113d8f626901bb156b2f7cf7c7564a6bbc7b5cd6f7cb484 PYTHON_FONTTOOLS_SETUP_TYPE = setuptools PYTHON_FONTTOOLS_LICENSE = MIT PYTHON_FONTTOOLS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:14:24 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:14:24 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiofiles: bump to version 22.1.0 Message-ID: <20221029011424.1394984-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-aiofiles/python-aiofiles.hash | 4 ++-- package/python-aiofiles/python-aiofiles.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiofiles/python-aiofiles.hash b/package/python-aiofiles/python-aiofiles.hash index 268136a406..d1594c3989 100644 --- a/package/python-aiofiles/python-aiofiles.hash +++ b/package/python-aiofiles/python-aiofiles.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiofiles/json -md5 697deeb4fdcb620c45f114f173ed7c0d aiofiles-0.8.0.tar.gz -sha256 8334f23235248a3b2e83b2c3a78a22674f39969b96397126cc93664d9a901e59 aiofiles-0.8.0.tar.gz +md5 b22db90039c881f6aa64431c6b23f30f aiofiles-22.1.0.tar.gz +sha256 9107f1ca0b2a5553987a94a3c9959fe5b491fdf731389aa5b7b1bd0733e32de6 aiofiles-22.1.0.tar.gz # Locally computed sha256 checksums sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-aiofiles/python-aiofiles.mk b/package/python-aiofiles/python-aiofiles.mk index 996e5eb6c0..b65d2cfa82 100644 --- a/package/python-aiofiles/python-aiofiles.mk +++ b/package/python-aiofiles/python-aiofiles.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOFILES_VERSION = 0.8.0 +PYTHON_AIOFILES_VERSION = 22.1.0 PYTHON_AIOFILES_SOURCE = aiofiles-$(PYTHON_AIOFILES_VERSION).tar.gz -PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/10/ca/c416cfacf6a47e1400dad56eab85aa86c92c6fbe58447d12035e434f0d5c +PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/86/26/6e5060a159a6131c430e8a01ec8327405a19a449a506224b394e36f2ebc9 PYTHON_AIOFILES_SETUP_TYPE = setuptools PYTHON_AIOFILES_LICENSE = Apache-2.0 PYTHON_AIOFILES_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:10:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:10:39 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pydyf: bump to version 0.5.0 Message-ID: <20221029011039.1393998-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pydyf/python-pydyf.hash | 4 ++-- package/python-pydyf/python-pydyf.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pydyf/python-pydyf.hash b/package/python-pydyf/python-pydyf.hash index 4c80d3fce6..1b37e90e73 100644 --- a/package/python-pydyf/python-pydyf.hash +++ b/package/python-pydyf/python-pydyf.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/pydyf/json -md5 3afeaff9db93af8b317c909196522ddd pydyf-0.3.0.tar.gz -sha256 1aea6c0c97cc7b809efb5427147e168a5404ed76a53d76a3aea590d4ca1b04a3 pydyf-0.3.0.tar.gz +md5 6b2a02162a3f4be9464d7b4043953d33 pydyf-0.5.0.tar.gz +sha256 51e751ae1504037c1fc1f4815119137b011802cd5f6c3539db066c455b14a7e1 pydyf-0.5.0.tar.gz # Locally computed sha256 checksums sha256 75461e438973e1ba0f93a7de9e3fe5b2f49e1ab49251d392878a9cdae8ce7e47 LICENSE diff --git a/package/python-pydyf/python-pydyf.mk b/package/python-pydyf/python-pydyf.mk index ae88a0eb3d..6327a3efe2 100644 --- a/package/python-pydyf/python-pydyf.mk +++ b/package/python-pydyf/python-pydyf.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYDYF_VERSION = 0.3.0 +PYTHON_PYDYF_VERSION = 0.5.0 PYTHON_PYDYF_SOURCE = pydyf-$(PYTHON_PYDYF_VERSION).tar.gz -PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/4d/12/3341ead2313889e2bf49b18ab6d65f47f8a8fb82ccb91faaf74f5e51125f +PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/f4/4c/6d31b36a46714d8206b8ca84b8dc9aaf42093415b1f50471538552abe501 PYTHON_PYDYF_SETUP_TYPE = flit PYTHON_PYDYF_LICENSE = BSD-3-Clause PYTHON_PYDYF_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:00:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:00:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-ujson: bump to version 5.5.0 Message-ID: <20221029010036.1388698-1-james.hilliard1@gmail.com> Switch to now supported system double-conversion library. Disable built in strip so that stripping is handled by buildroot. Signed-off-by: James Hilliard --- package/python-ujson/Config.in | 3 ++- package/python-ujson/python-ujson.hash | 4 ++-- package/python-ujson/python-ujson.mk | 10 +++++++--- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/package/python-ujson/Config.in b/package/python-ujson/Config.in index 7af03e6497..31b4d484d8 100644 --- a/package/python-ujson/Config.in +++ b/package/python-ujson/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_UJSON bool "python-ujson" - depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_INSTALL_LIBSTDCPP # double-conversion + select BR2_PACKAGE_DOUBLE_CONVERSION help UltraJSON is an ultra fast JSON encoder and decoder written in pure C with bindings for Python 3. diff --git a/package/python-ujson/python-ujson.hash b/package/python-ujson/python-ujson.hash index e88e273145..27df5aa355 100644 --- a/package/python-ujson/python-ujson.hash +++ b/package/python-ujson/python-ujson.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/ujson/json -md5 2c7ffd2bf23f6f07da3a0cbf5ff5c2f0 ujson-5.2.0.tar.gz -sha256 163191b88842d874e081707d35de2e205e0e396e70fd068d1038879bca8b17ad ujson-5.2.0.tar.gz +md5 73b42e3f4bf3130073cfffbd82608275 ujson-5.5.0.tar.gz +sha256 b25077a971c7da47bd6846a912a747f6963776d90720c88603b1b55d81790780 ujson-5.5.0.tar.gz # Locally computed sha256 checksums sha256 6a00a8f8b4050303368b694147bde1aed9c96bdff869c181dbbf3ccb784a1501 LICENSE.txt diff --git a/package/python-ujson/python-ujson.mk b/package/python-ujson/python-ujson.mk index 8eb5f6a0a7..95cb0ebad1 100644 --- a/package/python-ujson/python-ujson.mk +++ b/package/python-ujson/python-ujson.mk @@ -4,12 +4,16 @@ # ################################################################################ -PYTHON_UJSON_VERSION = 5.2.0 +PYTHON_UJSON_VERSION = 5.5.0 PYTHON_UJSON_SOURCE = ujson-$(PYTHON_UJSON_VERSION).tar.gz -PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/e4/fc/2dee0e78162aa1ad03dadde9a9b5c281d6f8bb0eed6810a270486d8fc041 +PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/6e/4a/03ddad85a10dd52e209993a14afa0cb0dc5c348e4647329f1c53856ad9e6 PYTHON_UJSON_SETUP_TYPE = setuptools PYTHON_UJSON_LICENSE = BSD-3-Clause PYTHON_UJSON_LICENSE_FILES = LICENSE.txt -PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm +PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm double-conversion +PYTHON_UJSON_ENV = \ + UJSON_BUILD_DC_INCLUDES="$(STAGING_DIR)/usr/include/double-conversion" \ + UJSON_BUILD_DC_LIBS="-ldouble-conversion" \ + UJSON_BUILD_NO_STRIP=1 $(eval $(python-package)) -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 07:55:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 09:55:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/qlibc: bump to version 2.4.7 Message-ID: <20221029075511.6599-1-fontaine.fabrice@gmail.com> https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 Signed-off-by: Fabrice Fontaine --- package/qlibc/qlibc.hash | 2 +- package/qlibc/qlibc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash index 5cd6e1860f..9b2af1a4e3 100644 --- a/package/qlibc/qlibc.hash +++ b/package/qlibc/qlibc.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk index 3996bb3706..838ba68746 100644 --- a/package/qlibc/qlibc.mk +++ b/package/qlibc/qlibc.mk @@ -4,7 +4,7 @@ # ################################################################################ -QLIBC_VERSION = 2.4.6 +QLIBC_VERSION = 2.4.7 QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) QLIBC_LICENSE = BSD-2-Clause QLIBC_LICENSE_FILES = LICENSE -- 2.35.1 From bernd.kuhls at t-online.de Sat Oct 29 07:58:55 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sat, 29 Oct 2022 09:58:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/samba4: security bump version to 4.15.11 Message-ID: <20221029075855.1236307-1-bernd.kuhls@t-online.de> Added patch from Gentoo to fix uClibc build: access.c:(.text+0x1e8): undefined reference to `innetgr' Release notes: https://www.samba.org/samba/history/samba-4.15.8.html https://www.samba.org/samba/history/samba-4.15.9.html o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with changing passwords. https://www.samba.org/samba/security/CVE-2022-2031.html o CVE-2022-32744: Samba AD users can forge password change requests for any user. https://www.samba.org/samba/security/CVE-2022-32744.html o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32745.html o CVE-2022-32746: Samba AD users can induce a use-after-free in the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32746.html o CVE-2022-32742: Server memory information leak via SMB1. https://www.samba.org/samba/security/CVE-2022-32742.html https://www.samba.org/samba/history/samba-4.15.10.html https://www.samba.org/samba/history/samba-4.15.11.html o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI unwrap_des() and unwrap_des3() routines of Heimdal (included in Samba). https://www.samba.org/samba/security/CVE-2022-3437.html Signed-off-by: Bernd Kuhls --- ...mba-4.16.2-fix-build-without-innetgr.patch | 34 +++++++++++++++++++ package/samba4/samba4.hash | 4 +-- package/samba4/samba4.mk | 2 +- 3 files changed, 37 insertions(+), 3 deletions(-) create mode 100644 package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch diff --git a/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch new file mode 100644 index 0000000000..b338596d7a --- /dev/null +++ b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch @@ -0,0 +1,34 @@ +# Gentoo bug 855047 + +Fixes uClibc build when uClibc was build without netgroup support. +Upstream enables netgroup support based on getdomainname() being +present: +https://github.com/samba-team/samba/commit/f179184a2be2ddd38f463fcc12252f8d24e529f8#diff-b8d1bc25b89846e70ecb61cb296a8f5c50c9a0a1b62e46790fae81aa9d5bfaaeR632 + +Downloaded from +https://gitweb.gentoo.org/repo/gentoo.git/tree/net-fs/samba/files/samba-4.16.2-fix-musl-without-innetgr.patch + +Signed-off-by: Bernd Kuhls + +--- a/lib/util/access.c ++++ b/lib/util/access.c +@@ -115,7 +115,7 @@ static bool string_match(const char *tok,const char *s) + return true; + } + } else if (tok[0] == '@') { /* netgroup: look it up */ +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + DATA_BLOB tmp; + char *mydomain = NULL; + char *hostname = NULL; +--- a/source3/auth/user_util.c ++++ b/source3/auth/user_util.c +@@ -135,7 +135,7 @@ static void store_map_in_gencache(TALLOC_CTX *ctx, const char *from, const char + + bool user_in_netgroup(TALLOC_CTX *ctx, const char *user, const char *ngname) + { +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + char nis_domain_buf[256]; + const char *nis_domain = NULL; + char *lowercase_user = NULL; diff --git a/package/samba4/samba4.hash b/package/samba4/samba4.hash index ac28c35614..f845a31290 100644 --- a/package/samba4/samba4.hash +++ b/package/samba4/samba4.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/samba/stable/samba-4.15.7.tar.asc -sha256 76d0096c16ed0265b337d5731f3c0b32eed3adab6fa8b7585c055b287cd05d6b samba-4.15.7.tar.gz +# https://download.samba.org/pub/samba/stable/samba-4.15.11.tar.asc +sha256 2f305980d49c7723cbef281fff2b81a2eeafae51e58b5172bb43d9693ef8953b samba-4.15.11.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/samba4/samba4.mk b/package/samba4/samba4.mk index c90fdd006c..814bf0bbaa 100644 --- a/package/samba4/samba4.mk +++ b/package/samba4/samba4.mk @@ -4,7 +4,7 @@ # ################################################################################ -SAMBA4_VERSION = 4.15.7 +SAMBA4_VERSION = 4.15.11 SAMBA4_SITE = https://download.samba.org/pub/samba/stable SAMBA4_SOURCE = samba-$(SAMBA4_VERSION).tar.gz SAMBA4_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:00:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:00:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.2 Message-ID: <20221029080033.17864-1-fontaine.fabrice@gmail.com> In the case that the WOLFSSL_CALLBACKS macro is set when building wolfSSL, there is a potential heap over read of 5 bytes when handling TLS 1.3 client connections. This heap over read is limited to wolfSSL builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does not get turned on by any other build options. The macro WOLFSSL_CALLBACKS is intended for debug use only, but if having it enabled in production, users are recommended to disable WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to update their version of wolfSSL. CVE 2022-42905 https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable Signed-off-by: Fabrice Fontaine --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index 3849ffb9fc..65d77ca659 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz +sha256 49c6195462cae034efe6c86268824ba515682508a5f5199358d56a4168a82cf0 wolfssl-5.5.2.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index 95d4f47952..d9fa72ccf4 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.1 +WOLFSSL_VERSION = 5.5.2 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES -- 2.35.1 From afshin.nasser at gmail.com Sat Oct 29 08:02:29 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Sat, 29 Oct 2022 11:32:29 +0330 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: References: <20221025065539.4646-1-afshin.nasser@gmail.com> <20221026102255.GA602@smart-All-Series> Message-ID: <20221029080229.GA24217@smart-All-Series> Hi Yegor, On Wed, Oct 26, 2022 at 08:21:30PM +0200, Yegor Yefremov wrote: > Hi Nasser, > > On Wed, Oct 26, 2022 at 12:23 PM Nasser Afshin wrote: > > > > Hi Yegor, > > > > Thankyou for taking time to review my patch. > > > > On Tue, Oct 25, 2022 at 10:33:19AM +0200, Yegor Yefremov wrote: > > > Hi Nasser, > > > > > > On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > > > > > > > Signed-off-by: Nasser Afshin > > > > --- > > > > package/Config.in | 1 + > > > > package/python-pycrate/Config.in | 8 ++++++++ > > > > package/python-pycrate/python-pycrate.hash | 4 ++++ > > > > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ > > > > > > An entry to the DEVELOPERS file is missing. > > > > May you help me to whome this entry should refer? > > You should add yourself as a "maintainer" of the package you add. Just > look at other entries. > I have added myself as a maintainer of this package. Thankyou. > > > > > > > > > 4 files changed, 26 insertions(+) > > > > create mode 100644 package/python-pycrate/Config.in > > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > > > diff --git a/package/Config.in b/package/Config.in > > > > index 56b1a08d8b..2443b7bb27 100644 > > > > --- a/package/Config.in > > > > +++ b/package/Config.in > > > > @@ -951,6 +951,7 @@ menu "External python modules" > > > > source "package/python-pyasn1-modules/Config.in" > > > > source "package/python-pycli/Config.in" > > > > source "package/python-pycparser/Config.in" > > > > + source "package/python-pycrate/Config.in" > > > > source "package/python-pycrypto/Config.in" > > > > source "package/python-pycryptodomex/Config.in" > > > > source "package/python-pydal/Config.in" > > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > > new file mode 100644 > > > > index 0000000000..9e2123d4dd > > > > --- /dev/null > > > > +++ b/package/python-pycrate/Config.in > > > > @@ -0,0 +1,8 @@ > > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > > + bool "python-pycrate" > > > > + help > > > > + It provides basically a runtime for encoding and decoding data structures, > > > > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > > > > + network. > > > > + > > > > + https://github.com/P1sec/pycrate/ > > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > > new file mode 100644 > > > > index 0000000000..24aa51d8e4 > > > > --- /dev/null > > > > +++ b/package/python-pycrate/python-pycrate.hash > > > > @@ -0,0 +1,4 @@ > > > > +# md5 from https://pypi.python.org/pypi/pycrate/json > > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > > +# Locally computed > > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > > new file mode 100644 > > > > index 0000000000..41ce6c18f2 > > > > --- /dev/null > > > > +++ b/package/python-pycrate/python-pycrate.mk > > > > @@ -0,0 +1,13 @@ > > > > +################################################################################ > > > > +# > > > > +# python-pycrate > > > > +# > > > > +################################################################################ > > > > + > > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > > +PYTHON_PYCRATE_SETUP_TYPE = distutils > > > > > > SETUP_TYPE is setuptools. > > > > > > Have you tried this command? > > > > > > ./utils/scanpypi pycrate > > > > > > It will do almost everything you need. The thing that is missing is > > > licensing info because there is no license file in the source archive. > > > > Thankyou for pointing this out. Now I send a new version, using this > > command and also adding licensing info. > > > > > > Best regards, > > > Yegor > > > > > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > > > > + > > > > +$(eval $(python-package)) > > > > -- > > > > 2.17.1 > > > > > > > > This is the second version of my patch. > > > > From 979beabd86f1c15d159e37136bc9591fb39b844e Mon Sep 17 00:00:00 2001 > > From: Nasser Afshin > > Date: Tue, 25 Oct 2022 16:06:53 +0330 > > Subject: [PATCH v2] python-pycrate: new package > > > > Signed-off-by: Nasser Afshin > > --- > > v1 -> v2: Added licence file and its checksum > > Used ./utils/scanpypi pycrate tool to be consistent with > > others > > > > package/Config.in | 1 + > > package/python-pycrate/Config.in | 6 ++++++ > > package/python-pycrate/python-pycrate.hash | 6 ++++++ > > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > > 4 files changed, 27 insertions(+) > > create mode 100644 package/python-pycrate/Config.in > > create mode 100644 package/python-pycrate/python-pycrate.hash > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..a6fcc72cc8 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -1168,6 +1168,7 @@ menu "External python modules" > > source "package/python-pycairo/Config.in" > > source "package/python-pycares/Config.in" > > source "package/python-pycparser/Config.in" > > + source "package/python-pycrate/Config.in" > > source "package/python-pycryptodomex/Config.in" > > source "package/python-pycups/Config.in" > > source "package/python-pydal/Config.in" > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > new file mode 100644 > > index 0000000000..193a973f7e > > --- /dev/null > > +++ b/package/python-pycrate/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_PYTHON_PYCRATE > > + bool "python-pycrate" > > + help > > + A software suite to handle various data formats. > > + > > + https://github.com/P1sec/pycrate/ > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > new file mode 100644 > > index 0000000000..8ad33370b4 > > --- /dev/null > > +++ b/package/python-pycrate/python-pycrate.hash > > @@ -0,0 +1,6 @@ > > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > +# Locally computed > > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > > + > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > new file mode 100644 > > index 0000000000..c0da152656 > > --- /dev/null > > +++ b/package/python-pycrate/python-pycrate.mk > > @@ -0,0 +1,14 @@ > > +################################################################################ > > +# > > +# python-pycrate > > +# > > +################################################################################ > > + > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > > + > > +$(eval $(python-package)) > > The patch looks good now. Thanks. > > Best regards, > Yegor This is the third version of the patch: >From de6e28885836a6d9a5347a083a68055098508583 Mon Sep 17 00:00:00 2001 From: Nasser Afshin Date: Tue, 25 Oct 2022 16:06:53 +0330 Subject: [PATCH v3] python-pycrate: new package Signed-off-by: Nasser Afshin --- v1 -> v2: Added licence file and its checksum Used ./utils/scanpypi pycrate tool to be consistent with others v2 -> v3: Added myself as the maintainer of this package DEVELOPERS | 3 +++ package/Config.in | 1 + package/python-pycrate/Config.in | 6 ++++++ package/python-pycrate/python-pycrate.hash | 6 ++++++ package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ 5 files changed, 30 insertions(+) create mode 100644 package/python-pycrate/Config.in create mode 100644 package/python-pycrate/python-pycrate.hash create mode 100644 package/python-pycrate/python-pycrate.mk diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..a1b48fd45c 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2157,6 +2157,9 @@ N: Murat Demirten F: package/jpeg-turbo/ F: package/libgeotiff/ +N: Nasser Afshin +F: package/python-pycrate/ + N: Nathaniel Roach F: package/bandwidthd/ F: package/libgudev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..a6fcc72cc8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1168,6 +1168,7 @@ menu "External python modules" source "package/python-pycairo/Config.in" source "package/python-pycares/Config.in" source "package/python-pycparser/Config.in" + source "package/python-pycrate/Config.in" source "package/python-pycryptodomex/Config.in" source "package/python-pycups/Config.in" source "package/python-pydal/Config.in" diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in new file mode 100644 index 0000000000..193a973f7e --- /dev/null +++ b/package/python-pycrate/Config.in @@ -0,0 +1,6 @@ +config BR2_PACKAGE_PYTHON_PYCRATE + bool "python-pycrate" + help + A software suite to handle various data formats. + + https://github.com/P1sec/pycrate/ diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash new file mode 100644 index 0000000000..8ad33370b4 --- /dev/null +++ b/package/python-pycrate/python-pycrate.hash @@ -0,0 +1,6 @@ +# md5, sha256 from https://pypi.org/pypi/pycrate/json +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz +# Locally computed +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt + diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk new file mode 100644 index 0000000000..c0da152656 --- /dev/null +++ b/package/python-pycrate/python-pycrate.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pycrate +# +################################################################################ + +PYTHON_PYCRATE_VERSION = 0.5.5 +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df +PYTHON_PYCRATE_SETUP_TYPE = setuptools +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ + +$(eval $(python-package)) -- 2.17.1 From bernd.kuhls at t-online.de Sat Oct 29 08:08:21 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sat, 29 Oct 2022 10:08:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/fetchmail: bump version to 6.4.34 Message-ID: <20221029080821.1334194-1-bernd.kuhls@t-online.de> Switched _SITE to https. Removed patch which was applied upstream: https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 Release notes: https://sourceforge.net/p/fetchmail/mailman/message/37721221/ https://sourceforge.net/p/fetchmail/mailman/message/37699234/ https://sourceforge.net/p/fetchmail/mailman/message/37687601/ https://sourceforge.net/p/fetchmail/mailman/message/37681775/ https://sourceforge.net/p/fetchmail/mailman/message/37645690/ Signed-off-by: Bernd Kuhls --- ...c-fix-cross-compilation-with-openssl.patch | 56 ------------------- package/fetchmail/fetchmail.hash | 4 +- package/fetchmail/fetchmail.mk | 6 +- 3 files changed, 4 insertions(+), 62 deletions(-) delete mode 100644 package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch diff --git a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch b/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch deleted file mode 100644 index fff848196a..0000000000 --- a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 262aa59c1a7a7100e1dd4e73a6d0112d9becc701 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 1 Apr 2022 19:23:06 +0200 -Subject: [PATCH] configure.ac: fix cross-compilation with openssl - -Don't call AC_LIB_LINKFLAGS when the libraries are retrieved through -pkg-config to avoid the following build failure when cross-compiling -raised since commit 77503f545d2806d07ab83c59ed9a96f435d281da: - -/home/autobuild/autobuild/instance-5/output-1/host/bin/arc-buildroot-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -I/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include -I/usr/kerberos/include -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib -o fetchmail socket.o getpass.o fetchmail.o env.o idle.o options.o daemon.o driver.o transact.o sink.o smtp.o idlist.o uid.o mxget.o md5ify.o cram.o gssapi.o opie.o interface.o netrc.o unmime.o conf.o checkalias.o uid_db.o lock.o rcfile_l.o rcfile_y.o ucs/norm_charmap.o fm_realpath.o pop3.o imap.o etrn.o odmr.o libfm.a strlcpy.o strlcat.o /usr/lib/libssl.so /usr/lib/libcrypto.so -/usr/lib/libssl.so: file not recognized: file format not recognized - -This build failure is raised because AC_LIB_LINKFLAGS will override the -pkg-config target libraries by the host openssl libraries: - -configure: Enabling OpenSSL support in /home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr. -configure: SSL-check: trying pkg-config for openssl -checking for SSL... yes -checking how to link with libssl... /usr/lib/libssl.so /usr/lib/libcrypto.so -configure: From pkg-config: Adding /usr/lib/libssl.so /usr/lib/libcrypto.so to LIBS. LDFLAGS= -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib - -Fixes: - - http://autobuild.buildroot.org/results/815f18f25017be178d478458c48712d9a8570d5a - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.com/fetchmail/fetchmail/-/merge_requests/42] ---- - configure.ac | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/configure.ac b/configure.ac -index bd042d51..80e5bf91 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -838,15 +838,13 @@ else - PKG_CHECK_MODULES([SSL],[$i],[ - set -- $SSL_LIBS - while test $# -ge 1 ; do -- case $1 in -l*|lib*) : ;; -+ case $1 in -l*|lib*) LIBS="$LIBS $1" ;; - *) LDFLAGS="$LDFLAGS $1" ;; - esac - shift - done - CPPFLAGS="$SSL_CFLAGS $CPPFLAGS" -- AC_LIB_LINKFLAGS([ssl], [crypto]) -- AS_MESSAGE([From pkg-config: Adding $LIBSSL to LIBS. LDFLAGS=$LDFLAGS]) -- LIBS="$LIBS $LIBSSL" -+ AS_MESSAGE([From pkg-config: $SSL_LIBS]) - found=1 - break],[: ignore-error]) - done --- -2.35.1 - diff --git a/package/fetchmail/fetchmail.hash b/package/fetchmail/fetchmail.hash index 5ff129b9a8..4b2cf90ed8 100644 --- a/package/fetchmail/fetchmail.hash +++ b/package/fetchmail/fetchmail.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/p/fetchmail/mailman/message/37628013/ -sha256 397df984082abae51edec6831700d68636f0e117cfaffcbdd3eed66d04b97321 fetchmail-6.4.29.tar.xz +# From https://sourceforge.net/p/fetchmail/mailman/message/37721221/ +sha256 c3bdded1b5ce236960bd1ceeee3f3257220ed99c3eec84a5d76bb5618e3258d4 fetchmail-6.4.34.tar.xz # Locally computed: sha256 6d87443b61041067a5eddb2cabf8aebff15b8b40771ad6b5e4754e607ec21b39 COPYING diff --git a/package/fetchmail/fetchmail.mk b/package/fetchmail/fetchmail.mk index 25dfcae87b..063e41b2e1 100644 --- a/package/fetchmail/fetchmail.mk +++ b/package/fetchmail/fetchmail.mk @@ -5,15 +5,13 @@ ################################################################################ FETCHMAIL_VERSION_MAJOR = 6.4 -FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).29 +FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).34 FETCHMAIL_SOURCE = fetchmail-$(FETCHMAIL_VERSION).tar.xz -FETCHMAIL_SITE = http://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) +FETCHMAIL_SITE = https://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) FETCHMAIL_LICENSE = GPL-2.0; some exceptions are mentioned in COPYING FETCHMAIL_LICENSE_FILES = COPYING FETCHMAIL_CPE_ID_VENDOR = fetchmail FETCHMAIL_SELINUX_MODULES = fetchmail mta -# We're patching configure.ac -FETCHMAIL_AUTORECONF = YES FETCHMAIL_CONF_OPTS = \ --with-ssl=$(STAGING_DIR)/usr -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:13:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:13:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/zsh: security bump to version 5.9 Message-ID: <20221029081307.36714-1-fontaine.fabrice@gmail.com> Security and bug fix release with several feature additions. https://zsh.sourceforge.io/releases.html Signed-off-by: Fabrice Fontaine --- package/zsh/zsh.hash | 2 +- package/zsh/zsh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/zsh/zsh.hash b/package/zsh/zsh.hash index 5c661ded25..e04aa388d3 100644 --- a/package/zsh/zsh.hash +++ b/package/zsh/zsh.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b6973520bace600b4779200269b1e5d79e5f505ac4952058c11ad5bbf0dd9919 zsh-5.8.1.tar.xz +sha256 9b8d1ecedd5b5e81fbf1918e876752a7dd948e05c1a0dba10ab863842d45acd5 zsh-5.9.tar.xz sha256 d06fdf3ef9b1ec69d6b9e170b0a9516fbad3523261ff1668bde3bfea6e0ef5f5 LICENCE diff --git a/package/zsh/zsh.mk b/package/zsh/zsh.mk index 8e6f713780..e790bf4c5e 100644 --- a/package/zsh/zsh.mk +++ b/package/zsh/zsh.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZSH_VERSION = 5.8.1 +ZSH_VERSION = 5.9 ZSH_SITE = http://www.zsh.org/pub ZSH_SOURCE = zsh-$(ZSH_VERSION).tar.xz ZSH_DEPENDENCIES = ncurses -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:25:10 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:25:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 Message-ID: <20221029082510.61178-1-fontaine.fabrice@gmail.com> https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 Signed-off-by: Fabrice Fontaine --- package/pahole/pahole.hash | 2 +- package/pahole/pahole.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pahole/pahole.hash b/package/pahole/pahole.hash index 8e5560b5e7..5610b252a3 100644 --- a/package/pahole/pahole.hash +++ b/package/pahole/pahole.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3531396c0568793ef8ca1a2fbb44ef2e1e81bdd55496a4487b83ba4d95df9d99 pahole-73383b3a39afe86b22e098773e47b8546c48a649.tar.gz +sha256 eeb88a62c3aaa1f4c389117b7e7cc08a49acc8a0e7f165f76dd9c5ab9af2c266 pahole-1.24.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pahole/pahole.mk b/package/pahole/pahole.mk index 199fa8cc11..82bba2f777 100644 --- a/package/pahole/pahole.mk +++ b/package/pahole/pahole.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHOLE_VERSION = 73383b3a39afe86b22e098773e47b8546c48a649 +PAHOLE_VERSION = 1.24 PAHOLE_SITE = https://git.kernel.org/pub/scm/devel/pahole/pahole.git/snapshot HOST_PAHOLE_DEPENDENCIES = \ host-elfutils \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:31:30 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:31:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/openipmi: bump to version 2.0.33 Message-ID: <20221029083130.77419-1-fontaine.fabrice@gmail.com> Drop patch (already in version) and so also drop autoreconf Signed-off-by: Fabrice Fontaine --- ...01-Avoid-searching-host-library-path.patch | 53 ------------------- package/openipmi/openipmi.hash | 6 +-- package/openipmi/openipmi.mk | 4 +- 3 files changed, 4 insertions(+), 59 deletions(-) delete mode 100644 package/openipmi/0001-Avoid-searching-host-library-path.patch diff --git a/package/openipmi/0001-Avoid-searching-host-library-path.patch b/package/openipmi/0001-Avoid-searching-host-library-path.patch deleted file mode 100644 index 15b4510f67..0000000000 --- a/package/openipmi/0001-Avoid-searching-host-library-path.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Wed, 22 Jul 2015 07:04:33 +0300 -Subject: [PATCH] Avoid searching host library path - -The $(libdir) variable points to the location of the directory on the target -system, /usr/lib by default. When cross compiling this directory contains the -host libraries which may be different than target libraries. Don't use -$(libdir) in the library search path. - -Signed-off-by: Baruch Siach -Signed-off-by: Joel Stanley -[Fabrice: refresh patch for 2.0.32] -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/35] ---- - cmdlang/Makefile.am | 3 +-- - unix/Makefile.am | 6 ++---- - 2 files changed, 3 insertions(+), 6 deletions(-) - -diff --git a/cmdlang/Makefile.am b/cmdlang/Makefile.am -index 264ee12be79f..0b3843784656 100644 ---- a/cmdlang/Makefile.am -+++ b/cmdlang/Makefile.am -@@ -15,7 +15,7 @@ libOpenIPMIcmdlang_la_SOURCES = cmdlang.c cmd_domain.c cmd_entity.c cmd_mc.c \ - $(top_builddir)/utils/libOpenIPMIutils.la \ - $(top_builddir)/lib/libOpenIPMI.la - libOpenIPMIcmdlang_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - bin_PROGRAMS = openipmish - -diff --git a/unix/Makefile.am b/unix/Makefile.am -index 5128839dad13..bd0f897ba8d6 100644 ---- a/unix/Makefile.am -+++ b/unix/Makefile.am -@@ -10,12 +10,12 @@ lib_LTLIBRARIES = libOpenIPMIposix.la libOpenIPMIpthread.la - libOpenIPMIpthread_la_LIBADD = -lpthread $(GDBM_LIB) \ - $(top_builddir)/utils/libOpenIPMIutils.la $(RT_LIB) - libOpenIPMIpthread_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - libOpenIPMIposix_la_SOURCES = posix_os_hnd.c selector.c - libOpenIPMIposix_la_LIBADD = $(top_builddir)/utils/libOpenIPMIutils.la \ - $(GDBM_LIB) $(RT_LIB) - libOpenIPMIposix_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - noinst_HEADERS = heap.h - diff --git a/package/openipmi/openipmi.hash b/package/openipmi/openipmi.hash index eded076ade..fc3cf1a520 100644 --- a/package/openipmi/openipmi.hash +++ b/package/openipmi/openipmi.hash @@ -1,8 +1,8 @@ # From http://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library/ -sha1 73d7dce4312b006983b11367e4a43d4ec52cf888 OpenIPMI-2.0.32.tar.gz -md5 532404c9df7d0e8bde975b95b9e6775b OpenIPMI-2.0.32.tar.gz +sha1 4387f227aad92756e296d1c9421e83231d355dbd OpenIPMI-2.0.33.tar.gz +md5 923d2914dbbc3307712f8c58401bab0f OpenIPMI-2.0.33.tar.gz # Locally computed -sha256 f6d0fd4c0a74b05f80907229d0b270f54ca23294bcc11979f8b8d12766786945 OpenIPMI-2.0.32.tar.gz +sha256 fb53e9ea5e2681cf8af7cda024b1a0044c675f84116ca27ae9616c8b7ad95b49 OpenIPMI-2.0.33.tar.gz sha256 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670 COPYING sha256 185323a62589e7ee80f86bf2ea29caad9a09fdda0ea3f1c00db8b778c7edf60e COPYING.BSD sha256 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509 COPYING.LIB diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index 81492ec131..ccf86f93cd 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -4,15 +4,13 @@ # ################################################################################ -OPENIPMI_VERSION = 2.0.32 +OPENIPMI_VERSION = 2.0.33 OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf OPENIPMI_INSTALL_STAGING = YES -# Patching Makefile.am -OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ --with-glib=no \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:44:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:44:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/numactl: use official license files Message-ID: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Use official license files available since version 2.0.13 and https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 Signed-off-by: Fabrice Fontaine --- package/numactl/numactl.hash | 3 ++- package/numactl/numactl.mk | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index 802175d360..a261eab9d0 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,3 +1,4 @@ # Locally calculated sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..6ff94091e9 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -7,7 +7,7 @@ NUMACTL_VERSION = 2.0.14 NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) -NUMACTL_LICENSE_FILES = README.md +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:44:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:44:55 +0200 Subject: [Buildroot] [PATCH 2/2] package/numactl: bump to version 2.0.16 In-Reply-To: <20221029084455.97704-1-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Message-ID: <20221029084455.97704-2-fontaine.fabrice@gmail.com> - Drop patches (already in version) - Use official tarball and so drop autoreconf https://github.com/numactl/numactl/releases/tag/v2.0.15 https://github.com/numactl/numactl/releases/tag/v2.0.16 Signed-off-by: Fabrice Fontaine --- ...0001-Do-not-stringify-SYMVER-symbols.patch | 25 --------- .../0002-link-with-latomic-if-needed.patch | 52 ------------------- package/numactl/numactl.hash | 2 +- package/numactl/numactl.mk | 6 +-- 4 files changed, 4 insertions(+), 81 deletions(-) delete mode 100644 package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch delete mode 100644 package/numactl/0002-link-with-latomic-if-needed.patch diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch deleted file mode 100644 index c6981aaf73..0000000000 --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 -From: Scott McMillan -Date: Fri, 9 Oct 2020 08:56:52 -0500 -Subject: [PATCH] Do not stringify SYMVER symbols - -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a -Signed-off-by: Thomas Petazzoni ---- - util.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/util.h b/util.h -index 99ada33..f2a20ac 100644 ---- a/util.h -+++ b/util.h -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); - #if HAVE_ATTRIBUTE_SYMVER - #define SYMVER(a,b) __attribute__ ((symver (b))) - #else --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); -+#define SYMVER(a,b) __asm__ (".symver " a "," b); - #endif --- -2.30.2 - diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch deleted file mode 100644 index 6dff0cb233..0000000000 --- a/package/numactl/0002-link-with-latomic-if-needed.patch +++ /dev/null @@ -1,52 +0,0 @@ -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 6 May 2021 23:08:36 +0200 -Subject: [PATCH] link with -latomic if needed - -numactl unconditionally uses __atomic_fetch_and but some architectures -(e.g. sparc) needs to link with -latomic to be able to use it. So check -if -latomic is needed and update numa.pc accordingly - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] ---- - Makefile.am | 1 + - configure.ac | 2 ++ - numa.pc.in | 1 + - 3 files changed, 4 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index 44d0d76..34f6815 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -151,6 +151,7 @@ SED_PROCESS = \ - -e 's, at exec_prefix\@,$(exec_prefix),g' \ - -e 's, at libdir\@,$(libdir),g' \ - -e 's, at includedir\@,$(includedir),g' \ -+ -e 's, at LIBS\@,$(LIBS),g' \ - < $< > $@ || rm $@ - - %.pc: %.pc.in Makefile -diff --git a/configure.ac b/configure.ac -index 659a765..e3b0eb3 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) - - AC_CONFIG_FILES([Makefile]) - -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) -+ - # GCC tries to be "helpful" and only issue a warning for unrecognized - # attributes. So we compile the test with Werror, so that if the - # attribute is not recognized the compilation fails -diff --git a/numa.pc.in b/numa.pc.in -index 8a0f202..cc04d50 100644 ---- a/numa.pc.in -+++ b/numa.pc.in -@@ -8,3 +8,4 @@ Description: NUMA policy library - Version: @VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lnuma -+Libs.Private: @LIBS@ diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index a261eab9d0..757001b750 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index 6ff94091e9..b2f349255f 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -4,12 +4,12 @@ # ################################################################################ -NUMACTL_VERSION = 2.0.14 -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) +NUMACTL_VERSION = 2.0.16 +NUMACTL_SITE = \ + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES -NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:56:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:56:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/ndisc6: bump to version 1.0.6 Message-ID: <20221029085622.104382-1-fontaine.fabrice@gmail.com> ndisc6: print NAT64 prefix if present. rdnssd: fix timeout calculation. https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 Signed-off-by: Fabrice Fontaine --- package/ndisc6/ndisc6.hash | 2 +- package/ndisc6/ndisc6.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash index d76e831208..e258382c53 100644 --- a/package/ndisc6/ndisc6.hash +++ b/package/ndisc6/ndisc6.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 # Locally computed sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk index ff6439e310..23734ca7d7 100644 --- a/package/ndisc6/ndisc6.mk +++ b/package/ndisc6/ndisc6.mk @@ -4,7 +4,7 @@ # ################################################################################ -NDISC6_VERSION = 1.0.5 +NDISC6_VERSION = 1.0.6 NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 NDISC6_SITE = http://www.remlab.net/files/ndisc6 NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:25:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:25:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/mxml: bump to version 3.3.1 Message-ID: <20221029092517.115919-1-fontaine.fabrice@gmail.com> Update hash of NOTICE (update in year: https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 Signed-off-by: Fabrice Fontaine --- package/mxml/mxml.hash | 4 ++-- package/mxml/mxml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash index 38056f4c3a..412977dff0 100644 --- a/package/mxml/mxml.hash +++ b/package/mxml/mxml.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk index 88d35cb7ee..d224cf5308 100644 --- a/package/mxml/mxml.mk +++ b/package/mxml/mxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -MXML_VERSION = 3.3 +MXML_VERSION = 3.3.1 MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) MXML_LICENSE = Apache-2.0 with exceptions MXML_LICENSE_FILES = LICENSE NOTICE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:39:47 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:39:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/mtr: bump to version 0.95 Message-ID: <20221029093947.124529-1-fontaine.fabrice@gmail.com> https://github.com/traviscross/mtr/blob/v0.95/NEWS Signed-off-by: Fabrice Fontaine --- package/mtr/mtr.hash | 2 +- package/mtr/mtr.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash index d6062ef08f..399799f49e 100644 --- a/package/mtr/mtr.hash +++ b/package/mtr/mtr.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk index 07c58a1e93..d3e3b1a97a 100644 --- a/package/mtr/mtr.mk +++ b/package/mtr/mtr.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTR_VERSION = 0.94 +MTR_VERSION = 0.95 MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) MTR_AUTORECONF = YES MTR_DEPENDENCIES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:45:35 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:45:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/mtd: bump to version 2.1.5 Message-ID: <20221029094535.133025-1-fontaine.fabrice@gmail.com> https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html Signed-off-by: Fabrice Fontaine --- package/mtd/mtd.hash | 4 ++-- package/mtd/mtd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash index 481788f844..a2133e3ce2 100644 --- a/package/mtd/mtd.hash +++ b/package/mtd/mtd.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk index 45e7c0c61c..6e266a8760 100644 --- a/package/mtd/mtd.mk +++ b/package/mtd/mtd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTD_VERSION = 2.1.3 +MTD_VERSION = 2.1.5 MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils MTD_LICENSE = GPL-2.0 -- 2.35.1 From glex.spb at gmail.com Sat Oct 29 11:09:42 2022 From: glex.spb at gmail.com (Gleb Mazovetskiy) Date: Sat, 29 Oct 2022 12:09:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: unset CMAKE_GENERATOR vars Message-ID: <20221029110943.155259-1-glex.spb@gmail.com> If the user environment defines `CMAKE_GENERATOR` (e.g. `CMAKE_GENERATOR=Ninja`), buildroot would previously fail to build cmake packages because buildroot uses `make` explicitly (as opposed to `cmake --build`). Unsets all the `CMAKE_GENERATOR*` variables before configuring a cmake package. Signed-off-by: Gleb Mazovetskiy --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..96b2579cc5 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -86,6 +86,7 @@ define $(2)_CONFIGURE_CMDS (mkdir -p $$($$(PKG)_BUILDDIR) && \ cd $$($$(PKG)_BUILDDIR) && \ rm -f CMakeCache.txt && \ + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ @@ -111,6 +112,7 @@ define $(2)_CONFIGURE_CMDS (mkdir -p $$($$(PKG)_BUILDDIR) && \ cd $$($$(PKG)_BUILDDIR) && \ rm -f CMakeCache.txt && \ + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ PATH=$$(BR_PATH) \ PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \ PKG_CONFIG_SYSROOT_DIR="/" \ -- 2.34.1 From ju.o at free.fr Sat Oct 29 11:53:21 2022 From: ju.o at free.fr (Julien Olivain) Date: Sat, 29 Oct 2022 13:53:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinycompress: new package Message-ID: <20221029115321.718694-1-ju.o@free.fr> tinycompress is a library for compress audio offload in alsa. It also contains the "cplay" and "crecord" programs. tinycompress is part of the ALSA project. https://www.alsa-project.org/ Signed-off-by: Julien Olivain --- Tested on master branch, commit 014ec19 with commands: make check-package ... 0 warnings generated ./utils/test-pkg -a -p tinycompress ... 44 builds, 3 skipped, 1 build failed, 0 legal-info failed, 0 show-info failed Note: The build failure is not related to this package. It is related to the toolchain "bootlin-xtensa-uclibc" for which a fix was proposed in: https://patchwork.ozlabs.org/project/buildroot/patch/20221010030937.6432-1-ju.o at free.fr/ --- DEVELOPERS | 1 + package/Config.in | 1 + ...-add-time.h-missing-header-inclusion.patch | 39 +++++++++++++++++++ package/tinycompress/Config.in | 10 +++++ package/tinycompress/tinycompress.hash | 5 +++ package/tinycompress/tinycompress.mk | 13 +++++++ 6 files changed, 69 insertions(+) create mode 100644 package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch create mode 100644 package/tinycompress/Config.in create mode 100644 package/tinycompress/tinycompress.hash create mode 100644 package/tinycompress/tinycompress.mk diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..df6b3f7b42 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1684,6 +1684,7 @@ F: package/python-distro/ F: package/python-gnupg/ F: package/python-pyalsa/ F: package/riscv-isa-sim/ +F: package/tinycompress/ F: package/zynaddsubfx/ F: support/testing/tests/package/sample_python_distro.py F: support/testing/tests/package/sample_python_gnupg.py diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..d691471877 100644 --- a/package/Config.in +++ b/package/Config.in @@ -52,6 +52,7 @@ menu "Audio and video applications" source "package/pulseaudio/Config.in" source "package/sox/Config.in" source "package/squeezelite/Config.in" + source "package/tinycompress/Config.in" source "package/tovid/Config.in" source "package/tstools/Config.in" source "package/twolame/Config.in" diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch new file mode 100644 index 0000000000..4068a54074 --- /dev/null +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch @@ -0,0 +1,39 @@ +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 +From: Julien Olivain +Date: Sat, 29 Oct 2022 12:51:17 +0200 +Subject: [PATCH] wave: add missing header inclusion + +When compiling tinycompress with some libc other than glibc +(e.g. musl libc), compilation fails with the following error: + + In file included from wave.c:11:0: + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ + [...] + +According to POSIX, "struct timespec" is defined in . See: +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html + +This patch fixes this build failure by including prior +. + +Signed-off-by: Julien Olivain +--- + src/utils/wave.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/utils/wave.c b/src/utils/wave.c +index a74149a..d17f66a 100644 +--- a/src/utils/wave.c ++++ b/src/utils/wave.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + + #include "tinycompress/tinywave.h" +-- +2.38.1 + diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in new file mode 100644 index 0000000000..aff1943c78 --- /dev/null +++ b/package/tinycompress/Config.in @@ -0,0 +1,10 @@ +config BR2_PACKAGE_TINYCOMPRESS + bool "tinycompress" + depends on !BR2_STATIC_LIBS # dlfcn.h + help + tinycompress is a library for compress audio offload in alsa. + + https://www.alsa-project.org/ + +comment "tinycompress needs a toolchain w/ dynamic library" + depends on BR2_STATIC_LIBS diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash new file mode 100644 index 0000000000..164f3a36c3 --- /dev/null +++ b/package/tinycompress/tinycompress.hash @@ -0,0 +1,5 @@ +# Locally calculated after checking pgp signature +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 + +# Locally calculated +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk new file mode 100644 index 0000000000..062233ec80 --- /dev/null +++ b/package/tinycompress/tinycompress.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# tinycompress +# +################################################################################ + +TINYCOMPRESS_VERSION = 1.2.8 +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 +TINYCOMPRESS_LICENSE_FILES = COPYING + +$(eval $(autotools-package)) -- 2.38.1 From fontaine.fabrice at gmail.com Sat Oct 29 11:55:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 13:55:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/dahdi-linux: bump to version 3.2.0 Message-ID: <20221029115555.789814-1-fontaine.fabrice@gmail.com> - Use official tarball - This bump will fix the following build failures with kernel >= 5.16: /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: fatal error: stdbool.h: No such file or directory 45 | #include | ^~~~~~~~~~~ [...] ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ?xbus_read_proc_open?: ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: error: implicit declaration of function ?PDE_DATA?; did you mean ?NODE_DATA?? [-Werror=implicit-function-declaration] 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); | ^~~~~~~~ | NODE_DATA https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 Fixes: - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 Signed-off-by: Fabrice Fontaine --- package/dahdi-linux/dahdi-linux.hash | 4 ++-- package/dahdi-linux/dahdi-linux.mk | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/dahdi-linux/dahdi-linux.hash b/package/dahdi-linux/dahdi-linux.hash index 7a4c688061..2d3f336777 100644 --- a/package/dahdi-linux/dahdi-linux.hash +++ b/package/dahdi-linux/dahdi-linux.hash @@ -1,5 +1,5 @@ -# Locally computed -sha256 3faf127ee3f1fad0195c56d00b7bf2708ec8a54bf3c31edd827fd9beb47e0a51 dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8-br1.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases/dahdi-linux-3.2.0.sha256 +sha256 e2ef9b3f6769f60f432cfa09c39c9a0d7ab5bddff59229f385056915c65f9f13 dahdi-linux-3.2.0.tar.gz # Firmware files have no upstream hash, so sha56 locally computed sha256 3ff26cf80555fd7470b43a87c51d03c1db2a75abcd4561d79f69b6c48298e4a1 dahdi-fwload-vpmadt032-1.25.0.tar.gz diff --git a/package/dahdi-linux/dahdi-linux.mk b/package/dahdi-linux/dahdi-linux.mk index 93124f0e02..88519b5106 100644 --- a/package/dahdi-linux/dahdi-linux.mk +++ b/package/dahdi-linux/dahdi-linux.mk @@ -4,9 +4,9 @@ # ################################################################################ -DAHDI_LINUX_VERSION = 5c840cf43838e0690873e73409491c392333b3b8 -DAHDI_LINUX_SITE = https://gerrit.asterisk.org/dahdi-linux -DAHDI_LINUX_SITE_METHOD = git +DAHDI_LINUX_VERSION = 3.2.0 +DAHDI_LINUX_SITE = \ + http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases # We need to download all those firmware blobs ourselves, otherwise # dahdi-linux will try to download them at install time. -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 11:55:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 13:55:55 +0200 Subject: [Buildroot] [PATCH 2/2] package/dahdi-tools: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-1-fontaine.fabrice@gmail.com> References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> Message-ID: <20221029115555.789814-2-fontaine.fabrice@gmail.com> https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 Signed-off-by: Fabrice Fontaine --- package/dahdi-tools/dahdi-tools.hash | 6 ++---- package/dahdi-tools/dahdi-tools.mk | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/dahdi-tools/dahdi-tools.hash b/package/dahdi-tools/dahdi-tools.hash index 72fa995c84..c119ff4ee1 100644 --- a/package/dahdi-tools/dahdi-tools.hash +++ b/package/dahdi-tools/dahdi-tools.hash @@ -1,7 +1,5 @@ -# sha1 from http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases -# sha256 locally computed -sha1 fff6c8fdc72a66f81768e4f50bf55156f7cebbc4 dahdi-tools-3.1.0.tar.gz -sha256 ea852ebd274ee1cc90ff5e4ac84261b0b787b1a74e8b76ad659bc9ec4f77e67e dahdi-tools-3.1.0.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases/dahdi-tools-3.2.0.sha256 +sha256 2bc269887fcd42d2486572611934d713e603734cc658b3b517fc9f3bdea7262f dahdi-tools-3.2.0.tar.gz # License files, locally computed sha256 fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7 LICENSE diff --git a/package/dahdi-tools/dahdi-tools.mk b/package/dahdi-tools/dahdi-tools.mk index fc0c591ca8..7d4de645a2 100644 --- a/package/dahdi-tools/dahdi-tools.mk +++ b/package/dahdi-tools/dahdi-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -DAHDI_TOOLS_VERSION = 3.1.0 +DAHDI_TOOLS_VERSION = 3.2.0 DAHDI_TOOLS_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases DAHDI_TOOLS_LICENSE = GPLv2, LGPLv2.1 -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 12:09:37 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 14:09:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/hackrf: bump to version 2022.09.1 Message-ID: <20221029120937.820995-1-fontaine.fabrice@gmail.com> - Update site - Drop patch (already in version) https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 Signed-off-by: Fabrice Fontaine --- ...ndFFTW.cmake-fix-build-without-fftw3.patch | 34 ------------------- package/hackrf/Config.in | 2 +- package/hackrf/hackrf.hash | 2 +- package/hackrf/hackrf.mk | 4 +-- 4 files changed, 4 insertions(+), 38 deletions(-) delete mode 100644 package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch diff --git a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch b/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch deleted file mode 100644 index 2b1f34879b..0000000000 --- a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 3e32f46c7948f6b26476558905995ebec9b01760 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 15 Oct 2021 23:36:54 +0200 -Subject: [PATCH] cmake/modules/FindFFTW.cmake: fix build without fftw3 - -Build on Linux fails if libfftw3 is not available since commit -https://github.com/greatscottgadgets/hackrf/commit/a8c1fc92e9fa10843cb4aafd68c52f9903ebd05d -which replaced -pkg_check_modules(FFTW REQUIRED fftw3f) -by -find_package(FFTW REQUIRED) - -Fix this build failure by updating FindFFTW.cmake to check for fftw3f - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/greatscottgadgets/hackrf/commit/3e32f46c7948f6b26476558905995ebec9b01760] ---- - host/cmake/modules/FindFFTW.cmake | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/host/cmake/modules/FindFFTW.cmake b/host/cmake/modules/FindFFTW.cmake -index b9f3bfb81..802db4f5b 100644 ---- a/host/cmake/modules/FindFFTW.cmake -+++ b/host/cmake/modules/FindFFTW.cmake -@@ -16,7 +16,7 @@ IF (WIN32) - include_directories(${FFTW_INCLUDES}) - find_library (FFTW_LIBRARIES NAMES ${FFTW_LIBRARIES}) - ELSE(WIN32) --find_library (FFTW_LIBRARIES NAMES fftw3) -+find_library (FFTW_LIBRARIES NAMES fftw3f) - ENDIF(WIN32) - - diff --git a/package/hackrf/Config.in b/package/hackrf/Config.in index 05d01adc96..d5df328dfa 100644 --- a/package/hackrf/Config.in +++ b/package/hackrf/Config.in @@ -9,7 +9,7 @@ config BR2_PACKAGE_HACKRF help Library and tools for accessing HackRF SDR boards. - https://github.com/mossmann/hackrf/tree/master/host + https://hackrf.readthedocs.io comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ diff --git a/package/hackrf/hackrf.hash b/package/hackrf/hackrf.hash index 9053858f76..16ccb9dcfb 100644 --- a/package/hackrf/hackrf.hash +++ b/package/hackrf/hackrf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a43e5080c11efdfe69ddebcc35a02b018e30e820de0e0ebdc7948cf7b0cd93a3 hackrf-2021.03.1.tar.xz +sha256 bacd4e7937467ffa14654624444c8b5c716ab470d8c1ee8d220d2094ae2adb3e hackrf-2022.09.1.tar.xz sha256 49b60a6288f90f49074228cc1fae0fb16871ba36b756013abdf7c2fc92f01fad COPYING diff --git a/package/hackrf/hackrf.mk b/package/hackrf/hackrf.mk index c224afc332..4317da60bc 100644 --- a/package/hackrf/hackrf.mk +++ b/package/hackrf/hackrf.mk @@ -4,8 +4,8 @@ # ################################################################################ -HACKRF_VERSION = 2021.03.1 -HACKRF_SITE = https://github.com/mossmann/hackrf/releases/download/v$(HACKRF_VERSION) +HACKRF_VERSION = 2022.09.1 +HACKRF_SITE = https://github.com/greatscottgadgets/hackrf/releases/download/v$(HACKRF_VERSION) HACKRF_SOURCE = hackrf-$(HACKRF_VERSION).tar.xz HACKRF_LICENSE = GPL-2.0+, BSD-3-Clause HACKRF_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 29 12:39:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 06:39:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.7 Message-ID: <20221029123903.1422864-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..eadf300bc2 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 06d9d166b4a2d86f06ed09eeb362ac03728e1fbd2b852cc6a4ddc7cc75029237 maturin-0.13.7.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..ffbd131ef0 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.7 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/4f/19/6f982e341612ab442f90ba1a047a4188d48473ad0d1dbfb3dffdaa20e095 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit -- 2.34.1 From peter at korsgaard.com Sat Oct 29 16:06:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/samba4: security bump version to 4.15.11 In-Reply-To: <20221029075855.1236307-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sat, 29 Oct 2022 09:58:55 +0200") References: <20221029075855.1236307-1-bernd.kuhls@t-online.de> Message-ID: <877d0izkb7.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Added patch from Gentoo to fix uClibc build: > access.c:(.text+0x1e8): undefined reference to `innetgr' > Release notes: > https://www.samba.org/samba/history/samba-4.15.8.html > https://www.samba.org/samba/history/samba-4.15.9.html > o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with > changing passwords. > https://www.samba.org/samba/security/CVE-2022-2031.html > o CVE-2022-32744: Samba AD users can forge password change requests for any user. > https://www.samba.org/samba/security/CVE-2022-32744.html > o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add > or modify request. > https://www.samba.org/samba/security/CVE-2022-32745.html > o CVE-2022-32746: Samba AD users can induce a use-after-free in the server > process with an LDAP add or modify request. > https://www.samba.org/samba/security/CVE-2022-32746.html > o CVE-2022-32742: Server memory information leak via SMB1. > https://www.samba.org/samba/security/CVE-2022-32742.html > https://www.samba.org/samba/history/samba-4.15.10.html > https://www.samba.org/samba/history/samba-4.15.11.html > o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI > unwrap_des() and unwrap_des3() routines of Heimdal (included > in Samba). > https://www.samba.org/samba/security/CVE-2022-3437.html > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:06:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.2 In-Reply-To: <20221029080033.17864-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:00:33 +0200") References: <20221029080033.17864-1-fontaine.fabrice@gmail.com> Message-ID: <8735b6zkb1.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > In the case that the WOLFSSL_CALLBACKS macro is set when building > wolfSSL, there is a potential heap over read of 5 bytes when handling > TLS 1.3 client connections. This heap over read is limited to wolfSSL > builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does > not get turned on by any other build options. The macro > WOLFSSL_CALLBACKS is intended for debug use only, but if having it > enabled in production, users are recommended to disable > WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to > update their version of wolfSSL. CVE 2022-42905 > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:03 +0200 Subject: [Buildroot] [PATCH 1/1] package/fetchmail: bump version to 6.4.34 In-Reply-To: <20221029080821.1334194-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sat, 29 Oct 2022 10:08:21 +0200") References: <20221029080821.1334194-1-bernd.kuhls@t-online.de> Message-ID: <87y1syy5p4.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Switched _SITE to https. > Removed patch which was applied upstream: > https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 > Release notes: > https://sourceforge.net/p/fetchmail/mailman/message/37721221/ > https://sourceforge.net/p/fetchmail/mailman/message/37699234/ > https://sourceforge.net/p/fetchmail/mailman/message/37687601/ > https://sourceforge.net/p/fetchmail/mailman/message/37681775/ > https://sourceforge.net/p/fetchmail/mailman/message/37645690/ > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/zsh: security bump to version 5.9 In-Reply-To: <20221029081307.36714-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:13:07 +0200") References: <20221029081307.36714-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3my5oi.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Security and bug fix release with several feature additions. > https://zsh.sourceforge.io/releases.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221029082510.61178-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:25:10 +0200") References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> Message-ID: <87pmeay5ns.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:08:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/dahdi-linux: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 13:55:54 +0200") References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> Message-ID: <87leoyy5ma.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Use official tarball > - This bump will fix the following build failures with kernel >= 5.16: > /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: > fatal error: stdbool.h: No such file or directory > 45 | #include > | ^~~~~~~~~~~ > [...] > ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ?xbus_read_proc_open?: > ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: > error: implicit declaration of function ?PDE_DATA?; did you mean > ?NODE_DATA?? [-Werror=implicit-function-declaration] > 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); > | ^~~~~~~~ > | NODE_DATA > https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 > Fixes: > - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 > - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:08:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:50 +0200 Subject: [Buildroot] [PATCH 2/2] package/dahdi-tools: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-2-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 13:55:55 +0200") References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> <20221029115555.789814-2-fontaine.fabrice@gmail.com> Message-ID: <87h6zmy5m5.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:49 +0200 Subject: [Buildroot] [git commit] package/pahole: bump to version 1.24 Message-ID: <20221029160920.6F33E86FBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7c7b4f88bca9b1ceba6478c5c03797675b1f10e8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pahole/pahole.hash | 2 +- package/pahole/pahole.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pahole/pahole.hash b/package/pahole/pahole.hash index 8e5560b5e7..5610b252a3 100644 --- a/package/pahole/pahole.hash +++ b/package/pahole/pahole.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3531396c0568793ef8ca1a2fbb44ef2e1e81bdd55496a4487b83ba4d95df9d99 pahole-73383b3a39afe86b22e098773e47b8546c48a649.tar.gz +sha256 eeb88a62c3aaa1f4c389117b7e7cc08a49acc8a0e7f165f76dd9c5ab9af2c266 pahole-1.24.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pahole/pahole.mk b/package/pahole/pahole.mk index 199fa8cc11..82bba2f777 100644 --- a/package/pahole/pahole.mk +++ b/package/pahole/pahole.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHOLE_VERSION = 73383b3a39afe86b22e098773e47b8546c48a649 +PAHOLE_VERSION = 1.24 PAHOLE_SITE = https://git.kernel.org/pub/scm/devel/pahole/pahole.git/snapshot HOST_PAHOLE_DEPENDENCIES = \ host-elfutils \ From peter at korsgaard.com Sat Oct 29 16:05:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:05:34 +0200 Subject: [Buildroot] [git commit] package/samba4: security bump version to 4.15.11 Message-ID: <20221029160920.42AD686FBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8941d02bf1da1574b8db65a104566a080e85308b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Added patch from Gentoo to fix uClibc build: access.c:(.text+0x1e8): undefined reference to `innetgr' Release notes: https://www.samba.org/samba/history/samba-4.15.8.html https://www.samba.org/samba/history/samba-4.15.9.html o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with changing passwords. https://www.samba.org/samba/security/CVE-2022-2031.html o CVE-2022-32744: Samba AD users can forge password change requests for any user. https://www.samba.org/samba/security/CVE-2022-32744.html o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32745.html o CVE-2022-32746: Samba AD users can induce a use-after-free in the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32746.html o CVE-2022-32742: Server memory information leak via SMB1. https://www.samba.org/samba/security/CVE-2022-32742.html https://www.samba.org/samba/history/samba-4.15.10.html https://www.samba.org/samba/history/samba-4.15.11.html o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI unwrap_des() and unwrap_des3() routines of Heimdal (included in Samba). https://www.samba.org/samba/security/CVE-2022-3437.html Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...05-samba-4.16.2-fix-build-without-innetgr.patch | 34 ++++++++++++++++++++++ package/samba4/samba4.hash | 4 +-- package/samba4/samba4.mk | 2 +- 3 files changed, 37 insertions(+), 3 deletions(-) diff --git a/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch new file mode 100644 index 0000000000..b338596d7a --- /dev/null +++ b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch @@ -0,0 +1,34 @@ +# Gentoo bug 855047 + +Fixes uClibc build when uClibc was build without netgroup support. +Upstream enables netgroup support based on getdomainname() being +present: +https://github.com/samba-team/samba/commit/f179184a2be2ddd38f463fcc12252f8d24e529f8#diff-b8d1bc25b89846e70ecb61cb296a8f5c50c9a0a1b62e46790fae81aa9d5bfaaeR632 + +Downloaded from +https://gitweb.gentoo.org/repo/gentoo.git/tree/net-fs/samba/files/samba-4.16.2-fix-musl-without-innetgr.patch + +Signed-off-by: Bernd Kuhls + +--- a/lib/util/access.c ++++ b/lib/util/access.c +@@ -115,7 +115,7 @@ static bool string_match(const char *tok,const char *s) + return true; + } + } else if (tok[0] == '@') { /* netgroup: look it up */ +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + DATA_BLOB tmp; + char *mydomain = NULL; + char *hostname = NULL; +--- a/source3/auth/user_util.c ++++ b/source3/auth/user_util.c +@@ -135,7 +135,7 @@ static void store_map_in_gencache(TALLOC_CTX *ctx, const char *from, const char + + bool user_in_netgroup(TALLOC_CTX *ctx, const char *user, const char *ngname) + { +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + char nis_domain_buf[256]; + const char *nis_domain = NULL; + char *lowercase_user = NULL; diff --git a/package/samba4/samba4.hash b/package/samba4/samba4.hash index ac28c35614..f845a31290 100644 --- a/package/samba4/samba4.hash +++ b/package/samba4/samba4.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/samba/stable/samba-4.15.7.tar.asc -sha256 76d0096c16ed0265b337d5731f3c0b32eed3adab6fa8b7585c055b287cd05d6b samba-4.15.7.tar.gz +# https://download.samba.org/pub/samba/stable/samba-4.15.11.tar.asc +sha256 2f305980d49c7723cbef281fff2b81a2eeafae51e58b5172bb43d9693ef8953b samba-4.15.11.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/samba4/samba4.mk b/package/samba4/samba4.mk index c90fdd006c..814bf0bbaa 100644 --- a/package/samba4/samba4.mk +++ b/package/samba4/samba4.mk @@ -4,7 +4,7 @@ # ################################################################################ -SAMBA4_VERSION = 4.15.7 +SAMBA4_VERSION = 4.15.11 SAMBA4_SITE = https://download.samba.org/pub/samba/stable SAMBA4_SOURCE = samba-$(SAMBA4_VERSION).tar.gz SAMBA4_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:05:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:05:45 +0200 Subject: [Buildroot] [git commit] package/wolfssl: security bump to version 5.5.2 Message-ID: <20221029160920.4CA9586FBA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=18b5d6205db7547d633d6ac4ea8ba4fdd81ecc35 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master In the case that the WOLFSSL_CALLBACKS macro is set when building wolfSSL, there is a potential heap over read of 5 bytes when handling TLS 1.3 client connections. This heap over read is limited to wolfSSL builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does not get turned on by any other build options. The macro WOLFSSL_CALLBACKS is intended for debug use only, but if having it enabled in production, users are recommended to disable WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to update their version of wolfSSL. CVE 2022-42905 https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index 3849ffb9fc..65d77ca659 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz +sha256 49c6195462cae034efe6c86268824ba515682508a5f5199358d56a4168a82cf0 wolfssl-5.5.2.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index 95d4f47952..d9fa72ccf4 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.1 +WOLFSSL_VERSION = 5.5.2 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:08:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:41 +0200 Subject: [Buildroot] [git commit] package/dahdi-tools: bump to version 3.2.0 Message-ID: <20221029160920.84DA28704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6905bbc143346aab01f747586af1ce83bc9fd2f1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dahdi-tools/dahdi-tools.hash | 6 ++---- package/dahdi-tools/dahdi-tools.mk | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/dahdi-tools/dahdi-tools.hash b/package/dahdi-tools/dahdi-tools.hash index 72fa995c84..c119ff4ee1 100644 --- a/package/dahdi-tools/dahdi-tools.hash +++ b/package/dahdi-tools/dahdi-tools.hash @@ -1,7 +1,5 @@ -# sha1 from http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases -# sha256 locally computed -sha1 fff6c8fdc72a66f81768e4f50bf55156f7cebbc4 dahdi-tools-3.1.0.tar.gz -sha256 ea852ebd274ee1cc90ff5e4ac84261b0b787b1a74e8b76ad659bc9ec4f77e67e dahdi-tools-3.1.0.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases/dahdi-tools-3.2.0.sha256 +sha256 2bc269887fcd42d2486572611934d713e603734cc658b3b517fc9f3bdea7262f dahdi-tools-3.2.0.tar.gz # License files, locally computed sha256 fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7 LICENSE diff --git a/package/dahdi-tools/dahdi-tools.mk b/package/dahdi-tools/dahdi-tools.mk index fc0c591ca8..7d4de645a2 100644 --- a/package/dahdi-tools/dahdi-tools.mk +++ b/package/dahdi-tools/dahdi-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -DAHDI_TOOLS_VERSION = 3.1.0 +DAHDI_TOOLS_VERSION = 3.2.0 DAHDI_TOOLS_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases DAHDI_TOOLS_LICENSE = GPLv2, LGPLv2.1 From peter at korsgaard.com Sat Oct 29 16:07:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:15 +0200 Subject: [Buildroot] [git commit] package/zsh: security bump to version 5.9 Message-ID: <20221029160920.6491387052@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=21531fa31a8cc49054f4af15f8556f4cb08daa7f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Security and bug fix release with several feature additions. https://zsh.sourceforge.io/releases.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/zsh/zsh.hash | 2 +- package/zsh/zsh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/zsh/zsh.hash b/package/zsh/zsh.hash index 5c661ded25..e04aa388d3 100644 --- a/package/zsh/zsh.hash +++ b/package/zsh/zsh.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b6973520bace600b4779200269b1e5d79e5f505ac4952058c11ad5bbf0dd9919 zsh-5.8.1.tar.xz +sha256 9b8d1ecedd5b5e81fbf1918e876752a7dd948e05c1a0dba10ab863842d45acd5 zsh-5.9.tar.xz sha256 d06fdf3ef9b1ec69d6b9e170b0a9516fbad3523261ff1668bde3bfea6e0ef5f5 LICENCE diff --git a/package/zsh/zsh.mk b/package/zsh/zsh.mk index 8e6f713780..e790bf4c5e 100644 --- a/package/zsh/zsh.mk +++ b/package/zsh/zsh.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZSH_VERSION = 5.8.1 +ZSH_VERSION = 5.9 ZSH_SITE = http://www.zsh.org/pub ZSH_SOURCE = zsh-$(ZSH_VERSION).tar.xz ZSH_DEPENDENCIES = ncurses From peter at korsgaard.com Sat Oct 29 16:08:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:18 +0200 Subject: [Buildroot] [git commit] package/dahdi-linux: bump to version 3.2.0 Message-ID: <20221029160920.7A7D986FBA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6cbfed0dbf43c5e04e3cc543b642e3c996bfed97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Use official tarball - This bump will fix the following build failures with kernel >= 5.16: /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: fatal error: stdbool.h: No such file or directory 45 | #include | ^~~~~~~~~~~ [...] ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ???xbus_read_proc_open???: ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: error: implicit declaration of function ???PDE_DATA???; did you mean ???NODE_DATA???? [-Werror=implicit-function-declaration] 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); | ^~~~~~~~ | NODE_DATA https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 Fixes: - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dahdi-linux/dahdi-linux.hash | 4 ++-- package/dahdi-linux/dahdi-linux.mk | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/dahdi-linux/dahdi-linux.hash b/package/dahdi-linux/dahdi-linux.hash index 7a4c688061..2d3f336777 100644 --- a/package/dahdi-linux/dahdi-linux.hash +++ b/package/dahdi-linux/dahdi-linux.hash @@ -1,5 +1,5 @@ -# Locally computed -sha256 3faf127ee3f1fad0195c56d00b7bf2708ec8a54bf3c31edd827fd9beb47e0a51 dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8-br1.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases/dahdi-linux-3.2.0.sha256 +sha256 e2ef9b3f6769f60f432cfa09c39c9a0d7ab5bddff59229f385056915c65f9f13 dahdi-linux-3.2.0.tar.gz # Firmware files have no upstream hash, so sha56 locally computed sha256 3ff26cf80555fd7470b43a87c51d03c1db2a75abcd4561d79f69b6c48298e4a1 dahdi-fwload-vpmadt032-1.25.0.tar.gz diff --git a/package/dahdi-linux/dahdi-linux.mk b/package/dahdi-linux/dahdi-linux.mk index 93124f0e02..88519b5106 100644 --- a/package/dahdi-linux/dahdi-linux.mk +++ b/package/dahdi-linux/dahdi-linux.mk @@ -4,9 +4,9 @@ # ################################################################################ -DAHDI_LINUX_VERSION = 5c840cf43838e0690873e73409491c392333b3b8 -DAHDI_LINUX_SITE = https://gerrit.asterisk.org/dahdi-linux -DAHDI_LINUX_SITE_METHOD = git +DAHDI_LINUX_VERSION = 3.2.0 +DAHDI_LINUX_SITE = \ + http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases # We need to download all those firmware blobs ourselves, otherwise # dahdi-linux will try to download them at install time. From peter at korsgaard.com Sat Oct 29 16:06:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:24 +0200 Subject: [Buildroot] [git commit] package/fetchmail: bump version to 6.4.34 Message-ID: <20221029160920.5A4E58704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3383613ad3d697001173b832c0a13257d6f7713a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switched _SITE to https. Removed patch which was applied upstream: https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 Release notes: https://sourceforge.net/p/fetchmail/mailman/message/37721221/ https://sourceforge.net/p/fetchmail/mailman/message/37699234/ https://sourceforge.net/p/fetchmail/mailman/message/37687601/ https://sourceforge.net/p/fetchmail/mailman/message/37681775/ https://sourceforge.net/p/fetchmail/mailman/message/37645690/ Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...ure.ac-fix-cross-compilation-with-openssl.patch | 56 ---------------------- package/fetchmail/fetchmail.hash | 4 +- package/fetchmail/fetchmail.mk | 6 +-- 3 files changed, 4 insertions(+), 62 deletions(-) diff --git a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch b/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch deleted file mode 100644 index fff848196a..0000000000 --- a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 262aa59c1a7a7100e1dd4e73a6d0112d9becc701 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 1 Apr 2022 19:23:06 +0200 -Subject: [PATCH] configure.ac: fix cross-compilation with openssl - -Don't call AC_LIB_LINKFLAGS when the libraries are retrieved through -pkg-config to avoid the following build failure when cross-compiling -raised since commit 77503f545d2806d07ab83c59ed9a96f435d281da: - -/home/autobuild/autobuild/instance-5/output-1/host/bin/arc-buildroot-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -I/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include -I/usr/kerberos/include -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib -o fetchmail socket.o getpass.o fetchmail.o env.o idle.o options.o daemon.o driver.o transact.o sink.o smtp.o idlist.o uid.o mxget.o md5ify.o cram.o gssapi.o opie.o interface.o netrc.o unmime.o conf.o checkalias.o uid_db.o lock.o rcfile_l.o rcfile_y.o ucs/norm_charmap.o fm_realpath.o pop3.o imap.o etrn.o odmr.o libfm.a strlcpy.o strlcat.o /usr/lib/libssl.so /usr/lib/libcrypto.so -/usr/lib/libssl.so: file not recognized: file format not recognized - -This build failure is raised because AC_LIB_LINKFLAGS will override the -pkg-config target libraries by the host openssl libraries: - -configure: Enabling OpenSSL support in /home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr. -configure: SSL-check: trying pkg-config for openssl -checking for SSL... yes -checking how to link with libssl... /usr/lib/libssl.so /usr/lib/libcrypto.so -configure: From pkg-config: Adding /usr/lib/libssl.so /usr/lib/libcrypto.so to LIBS. LDFLAGS= -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib - -Fixes: - - http://autobuild.buildroot.org/results/815f18f25017be178d478458c48712d9a8570d5a - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.com/fetchmail/fetchmail/-/merge_requests/42] ---- - configure.ac | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/configure.ac b/configure.ac -index bd042d51..80e5bf91 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -838,15 +838,13 @@ else - PKG_CHECK_MODULES([SSL],[$i],[ - set -- $SSL_LIBS - while test $# -ge 1 ; do -- case $1 in -l*|lib*) : ;; -+ case $1 in -l*|lib*) LIBS="$LIBS $1" ;; - *) LDFLAGS="$LDFLAGS $1" ;; - esac - shift - done - CPPFLAGS="$SSL_CFLAGS $CPPFLAGS" -- AC_LIB_LINKFLAGS([ssl], [crypto]) -- AS_MESSAGE([From pkg-config: Adding $LIBSSL to LIBS. LDFLAGS=$LDFLAGS]) -- LIBS="$LIBS $LIBSSL" -+ AS_MESSAGE([From pkg-config: $SSL_LIBS]) - found=1 - break],[: ignore-error]) - done --- -2.35.1 - diff --git a/package/fetchmail/fetchmail.hash b/package/fetchmail/fetchmail.hash index 5ff129b9a8..4b2cf90ed8 100644 --- a/package/fetchmail/fetchmail.hash +++ b/package/fetchmail/fetchmail.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/p/fetchmail/mailman/message/37628013/ -sha256 397df984082abae51edec6831700d68636f0e117cfaffcbdd3eed66d04b97321 fetchmail-6.4.29.tar.xz +# From https://sourceforge.net/p/fetchmail/mailman/message/37721221/ +sha256 c3bdded1b5ce236960bd1ceeee3f3257220ed99c3eec84a5d76bb5618e3258d4 fetchmail-6.4.34.tar.xz # Locally computed: sha256 6d87443b61041067a5eddb2cabf8aebff15b8b40771ad6b5e4754e607ec21b39 COPYING diff --git a/package/fetchmail/fetchmail.mk b/package/fetchmail/fetchmail.mk index 25dfcae87b..063e41b2e1 100644 --- a/package/fetchmail/fetchmail.mk +++ b/package/fetchmail/fetchmail.mk @@ -5,15 +5,13 @@ ################################################################################ FETCHMAIL_VERSION_MAJOR = 6.4 -FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).29 +FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).34 FETCHMAIL_SOURCE = fetchmail-$(FETCHMAIL_VERSION).tar.xz -FETCHMAIL_SITE = http://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) +FETCHMAIL_SITE = https://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) FETCHMAIL_LICENSE = GPL-2.0; some exceptions are mentioned in COPYING FETCHMAIL_LICENSE_FILES = COPYING FETCHMAIL_CPE_ID_VENDOR = fetchmail FETCHMAIL_SELINUX_MODULES = fetchmail mta -# We're patching configure.ac -FETCHMAIL_AUTORECONF = YES FETCHMAIL_CONF_OPTS = \ --with-ssl=$(STAGING_DIR)/usr From peter at korsgaard.com Sat Oct 29 16:09:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.12 In-Reply-To: <20221028184322.8908-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 20:43:22 +0200") References: <20221028184322.8908-1-bernd.kuhls@t-online.de> Message-ID: <87czaay5l1.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 > Fixes: > - CVE-2022-31630: http://bugs.php.net/81739 > - CVE-2022-37454: http://bugs.php.net/81738 > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/rsync: bump version to 3.2.7 In-Reply-To: <20221028192409.132447-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 21:24:09 +0200") References: <20221028192409.132447-1-bernd.kuhls@t-online.de> Message-ID: <878rkyy5k6.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://download.samba.org/pub/rsync/NEWS > Switched _SITE and package URL to https. > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:22 +0200 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add Bernd Kuhls to package rsync In-Reply-To: <20221028192546.132535-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 21:25:46 +0200") References: <20221028192546.132535-1-bernd.kuhls@t-online.de> Message-ID: <874jvmy5jl.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:13 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: add Bernd Kuhls to package rsync Message-ID: <20221029161122.41B508718B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=098db8b4d5649345f983e7601d60a1fc30836e1d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..c4d23cd293 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -447,6 +447,7 @@ F: package/python-pyicu/ F: package/python-pylru/ F: package/python-requests-oauthlib/ F: package/python-slob/ +F: package/rsync/ F: package/rtmpdump/ F: package/samba4/ F: package/softether/ From peter at korsgaard.com Sat Oct 29 16:09:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:22 +0200 Subject: [Buildroot] [git commit] package/php: security bump version to 8.1.12 Message-ID: <20221029161122.2B39D87174@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66c05c24baf17b98b7168bd950fbf40d25223247 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 Fixes: - CVE-2022-31630: http://bugs.php.net/81739 - CVE-2022-37454: http://bugs.php.net/81738 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index c4c42a2c7d..bf81ebf3e8 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz +sha256 08243359e2204d842082269eedc15f08d2eca726d0e65b93fb11f4bfc51bbbab php-8.1.12.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 7136fd9744..a400a38af7 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.11 +PHP_VERSION = 8.1.12 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:09:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:43 +0200 Subject: [Buildroot] [git commit] package/rsync: bump version to 3.2.7 Message-ID: <20221029161122.3447686FAB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=96db6a8ac96742cb817f87ce4c869677c6a6cfda branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://download.samba.org/pub/rsync/NEWS Switched _SITE and package URL to https. Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/rsync/Config.in | 2 +- package/rsync/rsync.hash | 4 ++-- package/rsync/rsync.mk | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/rsync/Config.in b/package/rsync/Config.in index b952974efb..b572c701ec 100644 --- a/package/rsync/Config.in +++ b/package/rsync/Config.in @@ -7,4 +7,4 @@ config BR2_PACKAGE_RSYNC help File transfer program to keep remote files in sync. - http://rsync.samba.org/ + https://rsync.samba.org/ diff --git a/package/rsync/rsync.hash b/package/rsync/rsync.hash index f0ba4d321d..842b5c099f 100644 --- a/package/rsync/rsync.hash +++ b/package/rsync/rsync.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/rsync/src/rsync-3.2.5.tar.gz.asc -sha256 2ac4d21635cdf791867bc377c35ca6dda7f50d919a58be45057fd51600c69aba rsync-3.2.5.tar.gz +# https://rsync.samba.org/ftp/rsync/src/rsync-3.2.7.tar.gz.asc +sha256 4e7d9d3f6ed10878c58c5fb724a67dacf4b6aac7340b13e488fb2dc41346f2bb rsync-3.2.7.tar.gz # Locally calculated sha256 85c19ea50a224c2d0067a69c083584e5717b40b76610ec1218f91385775067dd COPYING diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b98..81ad4b9291 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -4,8 +4,8 @@ # ################################################################################ -RSYNC_VERSION = 3.2.5 -RSYNC_SITE = http://rsync.samba.org/ftp/rsync/src +RSYNC_VERSION = 3.2.7 +RSYNC_SITE = https://rsync.samba.org/ftp/rsync/src RSYNC_LICENSE = GPL-3.0+ with exceptions RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba From peter at korsgaard.com Sat Oct 29 16:15:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:15:24 +0200 Subject: [Buildroot] [git commit] package/bats-core: bump to version 1.8.2 Message-ID: <20221029161619.BB01F8738D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5f779a2071509dbb11e9bb8662e9ae4b33d39ce3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/bats-core/bats-core/releases/tag/v1.5.0 https://github.com/bats-core/bats-core/releases/tag/v1.6.0 https://github.com/bats-core/bats-core/releases/tag/v1.6.1 https://github.com/bats-core/bats-core/releases/tag/v1.7.0 https://github.com/bats-core/bats-core/releases/tag/v1.8.0 https://github.com/bats-core/bats-core/releases/tag/v1.8.1 https://github.com/bats-core/bats-core/releases/tag/v1.8.2 Signed-off-by: Brandon Maier Signed-off-by: Peter Korsgaard --- package/bats-core/bats-core.hash | 2 +- package/bats-core/bats-core.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/bats-core/bats-core.hash b/package/bats-core/bats-core.hash index 369cc703d4..81c0229af4 100644 --- a/package/bats-core/bats-core.hash +++ b/package/bats-core/bats-core.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 bff517da043ae24440ec8272039f396c2a7907076ac67693c0f18d4a17c08f7d bats-core-1.4.1.tar.gz +sha256 0f2df311a536e625a72bff64c838e67c7b5032e6ea9edcdf32758303062b2f3b bats-core-1.8.2.tar.gz # License files sha256 55074b2b3b87809105034e1468e59076554d76a80c67bcc592000cc3d929852d LICENSE.md diff --git a/package/bats-core/bats-core.mk b/package/bats-core/bats-core.mk index 181d4eb033..e172445930 100644 --- a/package/bats-core/bats-core.mk +++ b/package/bats-core/bats-core.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATS_CORE_VERSION = 1.4.1 +BATS_CORE_VERSION = 1.8.2 BATS_CORE_SITE = $(call github,bats-core,bats-core,v$(BATS_CORE_VERSION)) BATS_CORE_LICENSE = MIT BATS_CORE_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Sat Oct 29 16:16:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:16:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/bats-core: bump to version 1.8.2 In-Reply-To: <20221029134516.44988-1-brandon.maier@collins.com> (Brandon Maier's message of "Sat, 29 Oct 2022 08:45:16 -0500") References: <20221029134516.44988-1-brandon.maier@collins.com> Message-ID: <87wn8iwqox.fsf@dell.be.48ers.dk> >>>>> "Brandon" == Brandon Maier writes: > https://github.com/bats-core/bats-core/releases/tag/v1.5.0 > https://github.com/bats-core/bats-core/releases/tag/v1.6.0 > https://github.com/bats-core/bats-core/releases/tag/v1.6.1 > https://github.com/bats-core/bats-core/releases/tag/v1.7.0 > https://github.com/bats-core/bats-core/releases/tag/v1.8.0 > https://github.com/bats-core/bats-core/releases/tag/v1.8.1 > https://github.com/bats-core/bats-core/releases/tag/v1.8.2 > Signed-off-by: Brandon Maier Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:20:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/atftp: bump to version 0.8.0 In-Reply-To: <20221028165748.47166-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 18:57:48 +0200") References: <20221028165748.47166-1-fontaine.fabrice@gmail.com> Message-ID: <87sfj6wqio.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - No configure script in official tarball > - pcre has been replaced by pcre2 since > https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef > https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae > https://github.com/madmartin/atftp/blob/v0.8.0/Changelog > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:20:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/conntrack-tools: bump to version 1.4.7 In-Reply-To: <20221028182401.137273-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 20:24:01 +0200") References: <20221028182401.137273-1-fontaine.fabrice@gmail.com> Message-ID: <87o7tuwqij.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:22:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/pinentry: bump to version 1.2.1 In-Reply-To: <20221028210245.41609-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 23:02:45 +0200") References: <20221028210245.41609-1-fontaine.fabrice@gmail.com> Message-ID: <87k04iwqey.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:22:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/pcsc-lite: bump to version 1.9.9 In-Reply-To: <20221028211546.220832-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 23:15:46 +0200") References: <20221028211546.220832-1-fontaine.fabrice@gmail.com> Message-ID: <87fsf6wqef.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:18:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:18:54 +0200 Subject: [Buildroot] [git commit] package/conntrack-tools: bump to version 1.4.7 Message-ID: <20221029162315.77E708742E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=376203a34e9851acaef1fcdff38aae1df89d50f9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/conntrack-tools/conntrack-tools.hash | 2 +- package/conntrack-tools/conntrack-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/conntrack-tools/conntrack-tools.hash b/package/conntrack-tools/conntrack-tools.hash index dd4fc168bc..371ede3432 100644 --- a/package/conntrack-tools/conntrack-tools.hash +++ b/package/conntrack-tools/conntrack-tools.hash @@ -1,4 +1,4 @@ # From https://netfilter.org/projects/conntrack-tools/downloads.html -sha256 590859cc848245dbfd9c6487761dd303b3a1771e007f4f42213063ca56205d5f conntrack-tools-1.4.6.tar.bz2 +sha256 099debcf57e81690ced57f516b493588a73518f48c14d656f823b29b4fc24b5d conntrack-tools-1.4.7.tar.bz2 # Locally calculated sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/conntrack-tools/conntrack-tools.mk b/package/conntrack-tools/conntrack-tools.mk index 55ea407924..ec633f0d54 100644 --- a/package/conntrack-tools/conntrack-tools.mk +++ b/package/conntrack-tools/conntrack-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -CONNTRACK_TOOLS_VERSION = 1.4.6 +CONNTRACK_TOOLS_VERSION = 1.4.7 CONNTRACK_TOOLS_SOURCE = conntrack-tools-$(CONNTRACK_TOOLS_VERSION).tar.bz2 CONNTRACK_TOOLS_SITE = http://www.netfilter.org/projects/conntrack-tools/files CONNTRACK_TOOLS_DEPENDENCIES = host-pkgconf \ From peter at korsgaard.com Sat Oct 29 16:18:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:18:37 +0200 Subject: [Buildroot] [git commit] package/atftp: bump to version 0.8.0 Message-ID: <20221029162315.6F1F48742D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8acac82278fe3899fdaeff324e405baa4390e951 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - No configure script in official tarball - pcre has been replaced by pcre2 since https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae https://github.com/madmartin/atftp/blob/v0.8.0/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/atftp/atftp.hash | 2 +- package/atftp/atftp.mk | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/atftp/atftp.hash b/package/atftp/atftp.hash index 6b0d9a5879..b335456f33 100644 --- a/package/atftp/atftp.hash +++ b/package/atftp/atftp.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 93c87a4fb18218414e008e01c995dadd231ba4c752d0f894b34416d1e6d3038a atftp-0.7.5.tar.gz +sha256 df2aa089c7670f9eab40e5598e5d2cb6a582dc5182926ea50b4d690e4e37f316 atftp-0.8.0.tar.gz sha256 86dc744860e6dfacfeba2f33fea908db03fe67c7e37a878285b7aae8e4596735 LICENSE diff --git a/package/atftp/atftp.mk b/package/atftp/atftp.mk index 70ef4c0fae..288501bc11 100644 --- a/package/atftp/atftp.mk +++ b/package/atftp/atftp.mk @@ -4,12 +4,14 @@ # ################################################################################ -ATFTP_VERSION = 0.7.5 +ATFTP_VERSION = 0.8.0 ATFTP_SITE = http://sourceforge.net/projects/atftp/files ATFTP_LICENSE = GPL-2.0+ ATFTP_LICENSE_FILES = LICENSE ATFTP_CPE_ID_VENDOR = atftp_project ATFTP_SELINUX_MODULES = tftp +# No configure in tarball +ATFTP_AUTORECONF = YES ATFTP_CONF_OPTS = --disable-libwrap --disable-mtftp # For static we need to explicitly link against libpthread ATFTP_LIBS = -lpthread @@ -27,8 +29,8 @@ else ATFTP_CONF_OPTS += --disable-libreadline endif -ifeq ($(BR2_PACKAGE_PCRE),y) -ATFTP_DEPENDENCIES += pcre +ifeq ($(BR2_PACKAGE_PCRE2),y) +ATFTP_DEPENDENCIES += pcre2 ATFTP_CONF_OPTS += --enable-libpcre else ATFTP_CONF_OPTS += --disable-libpcre From peter at korsgaard.com Sat Oct 29 16:20:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:35 +0200 Subject: [Buildroot] [git commit] package/pinentry: bump to version 1.2.1 Message-ID: <20221029162315.8164B8742F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4a65c3d9cdf84b47f5e25ba9dc0f759e4f96c557 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pinentry/pinentry.hash | 4 ++-- package/pinentry/pinentry.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/pinentry/pinentry.hash b/package/pinentry/pinentry.hash index e5f3d90652..187c86f9bd 100644 --- a/package/pinentry/pinentry.hash +++ b/package/pinentry/pinentry.hash @@ -1,5 +1,5 @@ # From https://www.gnupg.org/download/integrity_check.html -sha1 b8b88cab4fd844e3616d55aeba8f084f2b98fb0f pinentry-1.1.1.tar.bz2 +sha1 29daaf45f15cb5b8ec9b4a06284343f7a87082fb pinentry-1.2.1.tar.bz2 # Locally computed -sha256 cd12a064013ed18e2ee8475e669b9f58db1b225a0144debdb85a68cecddba57f pinentry-1.1.1.tar.bz2 +sha256 457a185e5a85238fb945a955dc6352ab962dc8b48720b62fc9fa48c7540a4067 pinentry-1.2.1.tar.bz2 sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 COPYING diff --git a/package/pinentry/pinentry.mk b/package/pinentry/pinentry.mk index 8ebd35cfab..338d61af2d 100644 --- a/package/pinentry/pinentry.mk +++ b/package/pinentry/pinentry.mk @@ -4,7 +4,7 @@ # ################################################################################ -PINENTRY_VERSION = 1.1.1 +PINENTRY_VERSION = 1.2.1 PINENTRY_SOURCE = pinentry-$(PINENTRY_VERSION).tar.bz2 PINENTRY_SITE = https://www.gnupg.org/ftp/gcrypt/pinentry PINENTRY_LICENSE = GPL-2.0+ From peter at korsgaard.com Sat Oct 29 16:22:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:45 +0200 Subject: [Buildroot] [git commit] package/pcsc-lite: bump to version 1.9.9 Message-ID: <20221029162315.8B1BB87430@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8268346d75bf31e8311f451b4548e7547e8e7913 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pcsc-lite/pcsc-lite.hash | 2 +- package/pcsc-lite/pcsc-lite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pcsc-lite/pcsc-lite.hash b/package/pcsc-lite/pcsc-lite.hash index 340a9edbea..4326822e41 100644 --- a/package/pcsc-lite/pcsc-lite.hash +++ b/package/pcsc-lite/pcsc-lite.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 502d80c557ecbee285eb99fe8703eeb667bcfe067577467b50efe3420d1b2289 pcsc-lite-1.9.8.tar.bz2 +sha256 cbcc3b34c61f53291cecc0d831423c94d437b188eb2b97b7febc08de1c914e8a pcsc-lite-1.9.9.tar.bz2 sha256 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 GPL-3.0.txt diff --git a/package/pcsc-lite/pcsc-lite.mk b/package/pcsc-lite/pcsc-lite.mk index 34950dd866..0b92380ccb 100644 --- a/package/pcsc-lite/pcsc-lite.mk +++ b/package/pcsc-lite/pcsc-lite.mk @@ -4,7 +4,7 @@ # ################################################################################ -PCSC_LITE_VERSION = 1.9.8 +PCSC_LITE_VERSION = 1.9.9 PCSC_LITE_SOURCE = pcsc-lite-$(PCSC_LITE_VERSION).tar.bz2 PCSC_LITE_SITE = https://pcsclite.apdu.fr/files PCSC_LITE_INSTALL_STAGING = YES From fontaine.fabrice at gmail.com Sat Oct 29 17:00:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:00:22 +0200 Subject: [Buildroot] [PATCH 1/2] package/f2fs-tools: add lz4 and lzo optional dependencies Message-ID: <20221029170023.219493-1-fontaine.fabrice@gmail.com> lz4 and lzo are optional dependencies (enabled by default) since bump to version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc Signed-off-by: Fabrice Fontaine --- ...1-configure-ac-fix-cross-compilation.patch | 88 +++++++++++++++++++ package/f2fs-tools/f2fs-tools.mk | 18 +++- 2 files changed, 105 insertions(+), 1 deletion(-) create mode 100644 package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch diff --git a/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch new file mode 100644 index 0000000000..0e3d4da191 --- /dev/null +++ b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch @@ -0,0 +1,88 @@ +From 32e7d272344024c216f155c3463dd2d548f3fafd Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 4 Jul 2022 11:29:19 +0200 +Subject: configure.ac: fix cross compilation + +AC_CHECK_LIB seems to not work correctly with OpenWrt. Add possibility +to disable lz4 and lzo2 manually. + +Fixes errors in the form of: + Package f2fsck is missing dependencies for the following libraries: + liblz4.so.1 + liblzo2.so.2 + +Signed-off-by: Nick Hainke +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=32e7d272344024c216f155c3463dd2d548f3fafd] +Signed-off-by: Fabrice Fontaine +--- + configure.ac | 44 ++++++++++++++++++++++++++++++++++---------- + 1 file changed, 34 insertions(+), 10 deletions(-) + +diff --git a/configure.ac b/configure.ac +index ea39461..dbe9ad3 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -50,6 +50,18 @@ AC_ARG_WITH([blkid], + [], + [with_blkid=check]) + ++AC_ARG_WITH([lzo2], ++ [AS_HELP_STRING([--without-lzo2], ++ [Ignore presence of liblzo2 and disable lzo2 support])], ++ [], ++ [with_lzo2=check]) ++ ++AC_ARG_WITH([lz4], ++ [AS_HELP_STRING([--without-lz4], ++ [Ignore presence of liblz4 and disable lz4 support])], ++ [], ++ [with_lz4=check]) ++ + # Checks for programs. + AC_PROG_CC + AM_PROG_AR +@@ -71,17 +83,29 @@ AS_IF([test "x$with_blkid" != xno], + fi + ], -lblkid)]) + +-AC_CHECK_LIB([lzo2], [main], +- [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) +- AC_DEFINE([HAVE_LIBLZO2], [1], +- [Define if you have liblzo2]) +- ], [], []) ++AS_IF([test "x$with_lzo2" != xno], ++ [AC_CHECK_LIB([lzo2], [main], ++ [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) ++ AC_DEFINE([HAVE_LIBLZO2], [1], ++ [Define if you have liblzo2]) ++ ], ++ [if test "x$with_lzo2" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lzo2 was given, but test for lzo2 failed]) ++ fi ++ ], -llzo2)]) + +-AC_CHECK_LIB([lz4], [main], +- [AC_SUBST([liblz4_LIBS], ["-llz4"]) +- AC_DEFINE([HAVE_LIBLZ4], [1], +- [Define if you have liblz4]) +- ], [], []) ++AS_IF([test "x$with_lz4" != xno], ++ [AC_CHECK_LIB([lz4], [main], ++ [AC_SUBST([liblz4_LIBS], ["-llz4"]) ++ AC_DEFINE([HAVE_LIBLZ4], [1], ++ [Define if you have liblz4]) ++ ], ++ [if test "x$with_lz4" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lz4 was given, but test for lz4 failed]) ++ fi ++ ], -llz4)]) + + AS_IF([test "x$with_selinux" != xno], + [AC_CHECK_LIB([selinux], [getcon], +-- +cgit + diff --git a/package/f2fs-tools/f2fs-tools.mk b/package/f2fs-tools/f2fs-tools.mk index 2c4ee9185b..60f1004d77 100644 --- a/package/f2fs-tools/f2fs-tools.mk +++ b/package/f2fs-tools/f2fs-tools.mk @@ -22,6 +22,20 @@ else F2FS_TOOLS_CONF_OPTS += --without-selinux endif +ifeq ($(BR2_PACKAGE_LZ4),y) +F2FS_TOOLS_CONF_OPTS += --with-lz4 +F2FS_TOOLS_DEPENDENCIES += lz4 +else +F2FS_TOOLS_CONF_OPTS += --without-lz4 +endif + +ifeq ($(BR2_PACKAGE_LZO),y) +F2FS_TOOLS_CONF_OPTS += --with-lzo2 +F2FS_TOOLS_DEPENDENCIES += lzo +else +F2FS_TOOLS_CONF_OPTS += --without-lzo2 +endif + ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) # util-linux is a dependency already, no need to list it again F2FS_TOOLS_CONF_OPTS += --with-blkid @@ -34,7 +48,9 @@ endif # blkid support even if we have host-util-linux HOST_F2FS_TOOLS_CONF_OPTS = \ --without-selinux \ - --without-blkid + --without-blkid \ + --without-lz4 \ + --without-lzo2 $(eval $(autotools-package)) $(eval $(host-autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:00:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:00:23 +0200 Subject: [Buildroot] [PATCH 2/2] package/f2fs-tools: fix build with lz4 1.9.4 In-Reply-To: <20221029170023.219493-1-fontaine.fabrice@gmail.com> References: <20221029170023.219493-1-fontaine.fabrice@gmail.com> Message-ID: <20221029170023.219493-2-fontaine.fabrice@gmail.com> Fix the following build failure raised since bump of lz4 to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compress.c: In function 'lz4_compress_init': compress.c:36:42: error: 'LZ4_STREAMSIZE_U64' undeclared (first use in this function); did you mean 'LZ4_STREAMSIZE'? 36 | #define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) | ^~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ca8b6646322a4cb911fad5fb9cb38046743609bf Signed-off-by: Fabrice Fontaine --- ...s-tools-fix-build-error-on-lz4-1-9-4.patch | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch diff --git a/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch new file mode 100644 index 0000000000..b43def6bb7 --- /dev/null +++ b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch @@ -0,0 +1,34 @@ +From 19f77c6f6277a274434d6d8883f50e7955c6a8db Mon Sep 17 00:00:00 2001 +From: Jaegeuk Kim +Date: Mon, 29 Aug 2022 11:03:35 -0700 +Subject: f2fs-tools: fix build error on lz4-1.9.4 + +LZ4_STREAMSIZE_U64 is undefined in new lz4 lib. + +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=19f77c6f6277a274434d6d8883f50e7955c6a8db] +Signed-off-by: Fabrice Fontaine +--- + fsck/compress.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/fsck/compress.c b/fsck/compress.c +index b413492..b15f0a4 100644 +--- a/fsck/compress.c ++++ b/fsck/compress.c +@@ -32,10 +32,7 @@ + #ifdef HAVE_LIBLZ4 + #define LZ4_MEMORY_USAGE 14 + #define LZ4_MAX_INPUT_SIZE 0x7E000000 /* 2 113 929 216 bytes */ +-#ifndef LZ4_STREAMSIZE +-#define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) +-#endif +-#define LZ4_MEM_COMPRESS LZ4_STREAMSIZE ++#define LZ4_MEM_COMPRESS sizeof(LZ4_stream_t) + #define LZ4_ACCELERATION_DEFAULT 1 + #define LZ4_WORK_SIZE ALIGN_UP(LZ4_MEM_COMPRESS, 8) + #endif +-- +cgit + -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:19:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:19:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/pps-tools: bump to version 1.0.3 Message-ID: <20221029171948.232254-1-fontaine.fabrice@gmail.com> https://github.com/ago/pps-tools is redirecting to https://github.com/redlab-i/pps-tools https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 Signed-off-by: Fabrice Fontaine --- package/pps-tools/Config.in | 2 +- package/pps-tools/pps-tools.hash | 2 +- package/pps-tools/pps-tools.mk | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/pps-tools/Config.in b/package/pps-tools/Config.in index 0c4bb112a9..16caef3e0e 100644 --- a/package/pps-tools/Config.in +++ b/package/pps-tools/Config.in @@ -4,4 +4,4 @@ config BR2_PACKAGE_PPS_TOOLS Pulse per second tools. Provides timepps.h and other PPS utilities. - https://github.com/ago/pps-tools/ + https://github.com/redlab-i/pps-tools/ diff --git a/package/pps-tools/pps-tools.hash b/package/pps-tools/pps-tools.hash index ee3e4e3d79..b8cc2f64d5 100644 --- a/package/pps-tools/pps-tools.hash +++ b/package/pps-tools/pps-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1168f1474235017af413afdb07288303ad7a7b12a0282f3bf9ed0e22fe0d7d2e pps-tools-e2b25049df9a4da28168b7378016f1650d0dfa6b.tar.gz +sha256 89163e29f1a4a0a702bbe25b900fd37d2eb86442329cefee58847e57e1964d7a pps-tools-1.0.3.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pps-tools/pps-tools.mk b/package/pps-tools/pps-tools.mk index 2d82cf7dad..0aa22acf4e 100644 --- a/package/pps-tools/pps-tools.mk +++ b/package/pps-tools/pps-tools.mk @@ -4,8 +4,8 @@ # ################################################################################ -PPS_TOOLS_VERSION = e2b25049df9a4da28168b7378016f1650d0dfa6b -PPS_TOOLS_SITE = $(call github,ago,pps-tools,$(PPS_TOOLS_VERSION)) +PPS_TOOLS_VERSION = 1.0.3 +PPS_TOOLS_SITE = $(call github,redlab-i,pps-tools,v$(PPS_TOOLS_VERSION)) PPS_TOOLS_INSTALL_STAGING = YES PPS_TOOLS_LICENSE = GPL-2.0+ PPS_TOOLS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 29 17:22:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 11:22:15 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-wsaccel: bump to version 0.6.4 Message-ID: <20221029172215.1437796-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-wsaccel/python-wsaccel.hash | 4 ++-- package/python-wsaccel/python-wsaccel.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-wsaccel/python-wsaccel.hash b/package/python-wsaccel/python-wsaccel.hash index 9d0002d41d..b388c3cc7c 100644 --- a/package/python-wsaccel/python-wsaccel.hash +++ b/package/python-wsaccel/python-wsaccel.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/wsaccel/json -md5 973168711818dd98b8b28a4c2db77a27 wsaccel-0.6.3.tar.gz -sha256 fdb27866bb6b6e7a29e45222778ff97938782a0ce92eff07dfb20af8fb9301c4 wsaccel-0.6.3.tar.gz +md5 73bdc70035813ded14f9a4b81e82622a wsaccel-0.6.4.tar.gz +sha256 cbf66a88bcaf6c6ad16d50ea29215891526b6e993c4bc7ed44b044ee6fe3ad3d wsaccel-0.6.4.tar.gz # Locally computed sha256 checksums sha256 b6982974cb838b985b54b663d1780d280735086249c2e28015f25dd455df25da LICENSE diff --git a/package/python-wsaccel/python-wsaccel.mk b/package/python-wsaccel/python-wsaccel.mk index 7c78951f2f..ce41d431ff 100644 --- a/package/python-wsaccel/python-wsaccel.mk +++ b/package/python-wsaccel/python-wsaccel.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WSACCEL_VERSION = 0.6.3 +PYTHON_WSACCEL_VERSION = 0.6.4 PYTHON_WSACCEL_SOURCE = wsaccel-$(PYTHON_WSACCEL_VERSION).tar.gz -PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/f5/d1/3e99875a764d0d6ec94a74977ed72dd3022a7f31d036622da9cff8fc072f +PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/77/0b/a44df15382a76b6768184630d483b8363d65b9f70d1aacf76153d496bbb9 PYTHON_WSACCEL_LICENSE = Apache-2.0 PYTHON_WSACCEL_LICENSE_FILES = LICENSE PYTHON_WSACCEL_SETUP_TYPE = setuptools -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:26:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:26:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/sedutil: bump to version 1.20.0 Message-ID: <20221029172613.255025-1-fontaine.fabrice@gmail.com> https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 Signed-off-by: Fabrice Fontaine --- package/sedutil/sedutil.hash | 2 +- package/sedutil/sedutil.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sedutil/sedutil.hash b/package/sedutil/sedutil.hash index 26643ef684..2ceb5db659 100644 --- a/package/sedutil/sedutil.hash +++ b/package/sedutil/sedutil.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9259466b4f73af276153c5245834a56f48f8721ea7263611b5d5e8326bc43d9e sedutil-1.15.1.tar.gz +sha256 88016b93cbbef98fa6f5c4e6f58e6c871662b6a7f1fc8dc788c8599fa37a44f3 sedutil-1.20.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 Common/LICENSE.txt diff --git a/package/sedutil/sedutil.mk b/package/sedutil/sedutil.mk index c80e43448d..566ed4fae8 100644 --- a/package/sedutil/sedutil.mk +++ b/package/sedutil/sedutil.mk @@ -4,7 +4,7 @@ # ################################################################################ -SEDUTIL_VERSION = 1.15.1 +SEDUTIL_VERSION = 1.20.0 SEDUTIL_SITE = $(call github,Drive-Trust-Alliance,sedutil,$(SEDUTIL_VERSION)) SEDUTIL_LICENSE = GPL-3.0+ SEDUTIL_LICENSE_FILES = Common/LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 18:47:42 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 20:47:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/gawk: bump to version 5.2.0 Message-ID: <20221029184742.17565-1-fontaine.fabrice@gmail.com> https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 Signed-off-by: Fabrice Fontaine --- package/gawk/gawk.hash | 4 ++-- package/gawk/gawk.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gawk/gawk.hash b/package/gawk/gawk.hash index 894c939c5b..3ab0cfdbb3 100644 --- a/package/gawk/gawk.hash +++ b/package/gawk/gawk.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://ftp.gnu.org/gnu/gawk/gawk-5.1.1.tar.xz.sig +# https://ftp.gnu.org/gnu/gawk/gawk-5.2.0.tar.xz.sig # Primary key fingerprint: D196 7C63 7887 1317 7D86 1ED7 DF59 7815 937E C0D2 -sha256 d87629386e894bbea11a5e00515fc909dc9b7249529dad9e6a3a2c77085f7ea2 gawk-5.1.1.tar.xz +sha256 e4ddbad1c2ef10e8e815ca80208d0162d4c983e6cca16f925e8418632d639018 gawk-5.2.0.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gawk/gawk.mk b/package/gawk/gawk.mk index 3a1cec4969..47f681339d 100644 --- a/package/gawk/gawk.mk +++ b/package/gawk/gawk.mk @@ -4,7 +4,7 @@ # ################################################################################ -GAWK_VERSION = 5.1.1 +GAWK_VERSION = 5.2.0 GAWK_SOURCE = gawk-$(GAWK_VERSION).tar.xz GAWK_SITE = $(BR2_GNU_MIRROR)/gawk GAWK_DEPENDENCIES = host-gawk -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:44:59 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:44:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/minizip: bump to version 3.0.7 Message-ID: <20221029194459.28157-1-fontaine.fabrice@gmail.com> https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 Signed-off-by: Fabrice Fontaine --- package/minizip/minizip.hash | 2 +- package/minizip/minizip.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/minizip/minizip.hash b/package/minizip/minizip.hash index 0c6e218488..55fc176dbd 100644 --- a/package/minizip/minizip.hash +++ b/package/minizip/minizip.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 383fa1bdc28c482828a8a8db53f758dbd44291b641182724fda5df5b59cce543 minizip-3.0.6.tar.gz +sha256 39981a0db1bb6da504909bce63d7493286c5e50825c056564544c990d15c55cf minizip-3.0.7.tar.gz sha256 675181c03fc1302a1c8554c00f7be9bb420c5dbc9dcc2013433cec144413de03 LICENSE diff --git a/package/minizip/minizip.mk b/package/minizip/minizip.mk index 5adee7c494..c74c0df8d1 100644 --- a/package/minizip/minizip.mk +++ b/package/minizip/minizip.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINIZIP_VERSION = 3.0.6 +MINIZIP_VERSION = 3.0.7 MINIZIP_SITE = $(call github,zlib-ng,minizip-ng,$(MINIZIP_VERSION)) MINIZIP_DEPENDENCIES = host-pkgconf MINIZIP_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:51:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:51:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/minissdpd: bump to version 1.6.0 Message-ID: <20221029195108.35473-1-fontaine.fabrice@gmail.com> Update hash of LICENSE file (license refined for github: https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz Signed-off-by: Fabrice Fontaine --- package/minissdpd/minissdpd.hash | 4 ++-- package/minissdpd/minissdpd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/minissdpd/minissdpd.hash b/package/minissdpd/minissdpd.hash index e14fe7ab2c..bc1db5f283 100644 --- a/package/minissdpd/minissdpd.hash +++ b/package/minissdpd/minissdpd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 a073be9c6d9194feaeccf31cd986c48afd2212426b6594e75166cedff1c461aa minissdpd-1.5.20211105.tar.gz -sha256 45950e1d443106906f83a4ec7b9c2e1a9d6457130737a493cff0e5b7a39da570 LICENSE +sha256 f4c2dea6a472e0a5cc9dca2dc4c1fc36ba5538eacf8d793825293251725546bd minissdpd-1.6.0.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/minissdpd/minissdpd.mk b/package/minissdpd/minissdpd.mk index 2b9fac4df1..4f594cb5a0 100644 --- a/package/minissdpd/minissdpd.mk +++ b/package/minissdpd/minissdpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINISSDPD_VERSION = 1.5.20211105 +MINISSDPD_VERSION = 1.6.0 MINISSDPD_SITE = http://miniupnp.free.fr/files MINISSDPD_LICENSE = BSD-3-Clause MINISSDPD_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:56:47 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:56:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/minizip-zlib: bump to version 1.2.13 Message-ID: <20221029195647.42758-1-fontaine.fabrice@gmail.com> Use license file available since https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/blob/v1.2.13/ChangeLog Signed-off-by: Fabrice Fontaine --- package/minizip-zlib/minizip-zlib.hash | 4 ++-- package/minizip-zlib/minizip-zlib.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/minizip-zlib/minizip-zlib.hash b/package/minizip-zlib/minizip-zlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/minizip-zlib/minizip-zlib.hash +++ b/package/minizip-zlib/minizip-zlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/minizip-zlib/minizip-zlib.mk b/package/minizip-zlib/minizip-zlib.mk index ec0c3da7d6..4367a2420f 100644 --- a/package/minizip-zlib/minizip-zlib.mk +++ b/package/minizip-zlib/minizip-zlib.mk @@ -4,11 +4,11 @@ # ################################################################################ -MINIZIP_ZLIB_VERSION = 1.2.12 +MINIZIP_ZLIB_VERSION = 1.2.13 MINIZIP_ZLIB_SOURCE = zlib-$(MINIZIP_ZLIB_VERSION).tar.xz MINIZIP_ZLIB_SITE = http://www.zlib.net MINIZIP_ZLIB_LICENSE = Zlib -MINIZIP_ZLIB_LICENSE_FILES = README +MINIZIP_ZLIB_LICENSE_FILES = LICENSE MINIZIP_ZLIB_INSTALL_STAGING = YES MINIZIP_ZLIB_SUBDIR = contrib/minizip # configure is not shipped in contrib/minizip -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:01:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:01:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/libidn2: bump to version 2.3.4 Message-ID: <20221029200108.90174-1-fontaine.fabrice@gmail.com> https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS Signed-off-by: Fabrice Fontaine --- package/libidn2/libidn2.hash | 2 +- package/libidn2/libidn2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libidn2/libidn2.hash b/package/libidn2/libidn2.hash index 919c9b18a5..1051231bde 100644 --- a/package/libidn2/libidn2.hash +++ b/package/libidn2/libidn2.hash @@ -1,5 +1,5 @@ # Calculated locally after checking signature -sha256 f3ac987522c00d33d44b323cae424e2cffcb4c63c6aa6cd1376edacbf1c36eb0 libidn2-2.3.3.tar.gz +sha256 93caba72b4e051d1f8d4f5a076ab63c99b77faee019b72b9783b267986dbb45f libidn2-2.3.4.tar.gz # Hash for license files: sha256 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76 COPYING diff --git a/package/libidn2/libidn2.mk b/package/libidn2/libidn2.mk index 2dd27acde5..666dcdc50e 100644 --- a/package/libidn2/libidn2.mk +++ b/package/libidn2/libidn2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBIDN2_VERSION = 2.3.3 +LIBIDN2_VERSION = 2.3.4 LIBIDN2_SITE = $(BR2_GNU_MIRROR)/libidn LIBIDN2_LICENSE = GPL-2.0+ or LGPL-3.0+ (library) LIBIDN2_LICENSE_FILES = COPYING COPYINGv2 COPYING.LESSERv3 COPYING.unicode -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:30:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:30:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/makedumpfile: bump to version 1.7.2 Message-ID: <20221029203039.115558-1-fontaine.fabrice@gmail.com> Use official tarball https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 Signed-off-by: Fabrice Fontaine --- package/makedumpfile/makedumpfile.hash | 2 +- package/makedumpfile/makedumpfile.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/makedumpfile/makedumpfile.hash b/package/makedumpfile/makedumpfile.hash index 5eeb6387fa..f38d93c04a 100644 --- a/package/makedumpfile/makedumpfile.hash +++ b/package/makedumpfile/makedumpfile.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8985f8df249087ea68c6051dec6dac3ef0703fe2aa87d0266f3951f93aa8da5e makedumpfile-1.7.0.tar.gz +sha256 748583ea4c0b32346008aa53b313e9708f60a8481959c25c76e5c94740032d9b makedumpfile-1.7.2.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/makedumpfile/makedumpfile.mk b/package/makedumpfile/makedumpfile.mk index 868c681344..8dc60b043e 100644 --- a/package/makedumpfile/makedumpfile.mk +++ b/package/makedumpfile/makedumpfile.mk @@ -4,8 +4,8 @@ # ################################################################################ -MAKEDUMPFILE_VERSION = 1.7.0 -MAKEDUMPFILE_SITE = $(call github,makedumpfile,makedumpfile,$(MAKEDUMPFILE_VERSION)) +MAKEDUMPFILE_VERSION = 1.7.2 +MAKEDUMPFILE_SITE = https://github.com/makedumpfile/makedumpfile/releases/download/$(MAKEDUMPFILE_VERSION) MAKEDUMPFILE_DEPENDENCIES = bzip2 elfutils xz zlib MAKEDUMPFILE_LICENSE = GPL-2.0 MAKEDUMPFILE_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:40:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:40:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/lldpd: security bump to version 1.0.15 Message-ID: <20221029204023.162302-1-fontaine.fabrice@gmail.com> - Fix heap overflow when reading SONMP. CVE-2021-43612. - https://vincentbernat.github.io/lldpd/ is redirecting to https://lldpd.github.io/ https://github.com/lldpd/lldpd/blob/1.0.15/NEWS Signed-off-by: Fabrice Fontaine --- package/lldpd/Config.in | 2 +- package/lldpd/lldpd.hash | 4 ++-- package/lldpd/lldpd.mk | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lldpd/Config.in b/package/lldpd/Config.in index 9a9517b5b0..3e0446986f 100644 --- a/package/lldpd/Config.in +++ b/package/lldpd/Config.in @@ -18,7 +18,7 @@ config BR2_PACKAGE_LLDPD lldpd is an ISC-licensed implementation of LLDP for various Unixes. It also supports some proprietary protocols. - https://vincentbernat.github.io/lldpd/ + https://lldpd.github.io/ if BR2_PACKAGE_LLDPD diff --git a/package/lldpd/lldpd.hash b/package/lldpd/lldpd.hash index 6e809b2796..6db5ca98f1 100644 --- a/package/lldpd/lldpd.hash +++ b/package/lldpd/lldpd.hash @@ -1,5 +1,5 @@ # Locally computed after checking gpg key -# https://media.luffy.cx/files/lldpd/lldpd-1.0.9.tar.gz.gpg +# https://media.luffy.cx/files/lldpd/lldpd-1.0.15.tar.gz.gpg # using key AEF2348766F371C689A7360095A42FE8353525F9 -sha256 6b64eb3125952b1e33472198b054e8aa0dee45f45d3d4be22789090a474949f5 lldpd-1.0.9.tar.gz +sha256 f7fe3a130be98a19c491479ef60f36b8ee41a9e6bc4d7f2c41033f63956a3126 lldpd-1.0.15.tar.gz sha256 0e96a5aea65f16e2239231ce4ab90497f8bc3bb8fe6abe9299aade4726ff7c8d LICENSE diff --git a/package/lldpd/lldpd.mk b/package/lldpd/lldpd.mk index b88dd002e4..dd6f8dcf5d 100644 --- a/package/lldpd/lldpd.mk +++ b/package/lldpd/lldpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -LLDPD_VERSION = 1.0.9 +LLDPD_VERSION = 1.0.15 LLDPD_SITE = https://media.luffy.cx/files/lldpd LLDPD_DEPENDENCIES = \ $(if $(BR2_PACKAGE_CHECK),check) \ -- 2.35.1 From buildroot at busybox.net Sat Oct 29 20:58:42 2022 From: buildroot at busybox.net (busybox.net) Date: 29 Oct 2022 22:58:42 +0200 Subject: [Buildroot] Mailbox Quota Exceeded Message-ID: <20221029225842.E1D835B7DB732F4B@busybox.net> An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 29 21:05:09 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 23:05:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/kismet: bump to version 2022-08-R1 Message-ID: <20221029210509.265825-1-fontaine.fabrice@gmail.com> https://www.kismetwireless.net/release/kismet-2022-08-R1/ Signed-off-by: Fabrice Fontaine --- package/kismet/kismet.hash | 2 +- package/kismet/kismet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kismet/kismet.hash b/package/kismet/kismet.hash index fc5f854b7e..725d24e551 100644 --- a/package/kismet/kismet.hash +++ b/package/kismet/kismet.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 aaae4747f14734a73f601af013c0eee26e13680f5e3675dfce09b7de2e68b8a8 kismet-2022-02-R1.tar.xz +sha256 2149cceac5526508653f4d02dcf7a694e3da3dc000a2372a1ee4bf9988279781 kismet-2022-08-R1.tar.xz sha256 93c7f0d7e356b0abfb6f494ff3ea37f96abc84e9a5619b25d4e43f7553a55739 LICENSE diff --git a/package/kismet/kismet.mk b/package/kismet/kismet.mk index 3992a392f8..8def78ad2a 100644 --- a/package/kismet/kismet.mk +++ b/package/kismet/kismet.mk @@ -4,7 +4,7 @@ # ################################################################################ -KISMET_VERSION = 2022-02-R1 +KISMET_VERSION = 2022-08-R1 KISMET_SOURCE = kismet-$(KISMET_VERSION).tar.xz KISMET_SITE = http://www.kismetwireless.net/code KISMET_DEPENDENCIES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 21:28:24 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 23:28:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpam-radius-auth: bump to version 2.0.0 Message-ID: <20221029212824.315760-1-fontaine.fabrice@gmail.com> Switch site to get latest release https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog Signed-off-by: Fabrice Fontaine --- package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/libpam-radius-auth/libpam-radius-auth.hash b/package/libpam-radius-auth/libpam-radius-auth.hash index 0bf97c279c..63f3f1e45e 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.hash +++ b/package/libpam-radius-auth/libpam-radius-auth.hash @@ -1,5 +1,5 @@ # Locally calculated after checking PGP signature -sha256 742d79fc39824726c098e746bd3dc3484f983f5ee082c621c1e848b2c3725305 pam_radius-1.4.0.tar.gz +sha256 798dc358e7a143163e103bd38c4101645b2e93d82aa0ec63d32c0cb929d9c65c libpam-radius-auth-2.0.0.tar.gz # Hash for license file: sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 LICENSE diff --git a/package/libpam-radius-auth/libpam-radius-auth.mk b/package/libpam-radius-auth/libpam-radius-auth.mk index 184e48d3b7..9519aad750 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.mk +++ b/package/libpam-radius-auth/libpam-radius-auth.mk @@ -4,9 +4,8 @@ # ################################################################################ -LIBPAM_RADIUS_AUTH_VERSION = 1.4.0 -LIBPAM_RADIUS_AUTH_SITE = ftp://ftp.freeradius.org/pub/radius -LIBPAM_RADIUS_AUTH_SOURCE = pam_radius-$(LIBPAM_RADIUS_AUTH_VERSION).tar.gz +LIBPAM_RADIUS_AUTH_VERSION = 2.0.0 +LIBPAM_RADIUS_AUTH_SITE = $(call github,FreeRADIUS,pam_radius,release_$(subst .,_,$(LIBPAM_RADIUS_AUTH_VERSION))) LIBPAM_RADIUS_AUTH_DEPENDENCIES = linux-pam LIBPAM_RADIUS_AUTH_INSTALL_STAGING = YES LIBPAM_RADIUS_AUTH_LICENSE = GPL-2.0+ -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 30 03:10:35 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 21:10:35 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pypa-build: bump to version 0.9.0 Message-ID: <20221030031035.1635268-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pypa-build/python-pypa-build.hash | 4 ++-- package/python-pypa-build/python-pypa-build.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pypa-build/python-pypa-build.hash b/package/python-pypa-build/python-pypa-build.hash index c0856c2abf..4c02ee1dce 100644 --- a/package/python-pypa-build/python-pypa-build.hash +++ b/package/python-pypa-build/python-pypa-build.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/build/json -md5 307632355e32c3769c99da66f92fe020 build-0.8.0.tar.gz -sha256 887a6d471c901b1a6e6574ebaeeebb45e5269a79d095fe9a8f88d6614ed2e5f0 build-0.8.0.tar.gz +md5 f2dc1823b0eff7037e19be18e354b2f1 build-0.9.0.tar.gz +sha256 1a07724e891cbd898923145eb7752ee7653674c511378eb9c7691aab1612bc3c build-0.9.0.tar.gz # Locally computed sha256 checksums sha256 aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f LICENSE diff --git a/package/python-pypa-build/python-pypa-build.mk b/package/python-pypa-build/python-pypa-build.mk index de4894dc3a..b78aefe855 100644 --- a/package/python-pypa-build/python-pypa-build.mk +++ b/package/python-pypa-build/python-pypa-build.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYPA_BUILD_VERSION = 0.8.0 +PYTHON_PYPA_BUILD_VERSION = 0.9.0 PYTHON_PYPA_BUILD_SOURCE = build-$(PYTHON_PYPA_BUILD_VERSION).tar.gz -PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/52/fa/931038182be739955cf83179d9b9a6ce9832bc5f9a917a006f765cb53a1f +PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/0f/61/aaf43fbb36cc4308be8ac8088f52db9622b0dbf1f0880c1016ae6aa03f46 PYTHON_PYPA_BUILD_LICENSE = MIT PYTHON_PYPA_BUILD_LICENSE_FILES = LICENSE PYTHON_PYPA_BUILD_SETUP_TYPE = setuptools -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 06:34:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 06:34:02 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-29 Message-ID: <20221030063409.63FC881241@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-29 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 1 | 0 | 0 | 1 | 2022.08.x | 10 | 14 | 0 | 24 | master | 151 | 290 | 10 | 451 | Classification of failures by reason for master ----------------------------------------------- host-f2fs-tools-1.15.0 | 25 imagemagick-7.1.0-51 | 21 libcurl-7.86.0 | 21 host-sentry-cli-1.59.0 | 20 libnss-3.84 | 12 brltty | 10 glibc-2.36-66-ga1dc0be03c9d... | 10 host-binutils-2.38 | 10 host-go-1.19.2 | 9 crun-1.5 | 8 gobject-introspection-1.72.0 | 7 linux-6.0.1 | 6 elfutils-0.186 | 5 host-binutils-2.39 | 5 xz-5.2.7 | 5 dahdi-linux-5c840cf43838e06... | 4 dash-0.5.11.5 | 4 igd2-for-linux-2.1 | 4 linux-5.10.145-cip17 | 4 perl-5.34.1 | 4 f2fs-tools-1.15.0 | 3 host-rust-1.64.0 | 3 lxc-4.0.12 | 3 unknown | 3 acpid-2.0.34 | 2 android-tools-4.2.2+git2013... | 2 boost-1.80.0 | 2 edk2-edk2-stable202102 | 2 gensio-2.5.5 | 2 gummiboot-2bcd919c681c952eb... | 2 host-gdb-arc-2020.09-releas... | 2 host-pahole-1.24 | 2 host-pahole-73383b3a39afe86... | 2 json-c-0.16 | 2 libdeflate-1.12 | 2 libglib2-2.72.3 | 2 libshout-2.4.6 | 2 linux-5.10.145-cip17-rt7 | 2 linuxptp-3.1.1 | 2 uclibc-1.0.42 | 2 wolfssl-5.5.1 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 aer-inject-9bd5e2c7886fca72... | 1 alsa-lib-1.2.7.2 | 1 batman-adv-2021.4 | 1 bayer2rgb-neon-15feb1115b48... | 1 coremark-1.01 | 1 coreutils-9.1 | 1 file-5.43 | 1 fontconfig-2.13.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gerbera-1.10.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.37 | 1 host-delve-1.8.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 host-wine-7.0 | 1 ipmiutil-3.1.8 | 1 libapparmor-3.0.4 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libnl-3.6.0 | 1 libpcap-1.10.1 | 1 libxml2-2.10.3 | 1 linux-pam-1.5.2 | 1 ltp-testsuite-20220930 | 1 lttng-modules-2.13.1 | 1 lz4-1.9.4 | 1 musl-1.2.3 | 1 ntpsec-1_2_1 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 openssh-9.1p1 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 procps-ng-3.3.17 | 1 python-ujson-5.2.0 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 rabbitmq-server-3.8.2 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 rtl8723ds-76146e85847beb242... | 1 sudo-1.9.11p2 | 1 systemd-250.4 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-ng-test-6790eafe897b... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 xenomai-3.0.10 | 1 xvisor-0.3.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/1f1dc989059e3b5e2e410a2e7001a9a935a6d273 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a4b74017022d6a6e9f7bf9125c6e7abbd106de9c | mips64el | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/a9356ecfdda2c1f638d6faf9a5d9ca87ef18641b | ORPH mips64 | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/e7a904e9aab86aadc96058af80ea34c09fa7aeaf | ORPH mips64 | aer-inject-9bd5e2c7886fca72... | NOK | http://autobuild.buildroot.net/results/a5615594028f4b89e47f16fd4a39704d441f1eb7 | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/827522c4d736f1706c45e7d93c3987408caac32b | powerpc64 | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/38dc70c42fe02fc1d6f244d5d121e72d924c6ec4 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/02dcdc8fc1b3f07988c86e6eeccae187d8658553 | arc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/c9eac6ef2dcfbfe3cbfa39e3d4063570152ae845 | aarch64 | bayer2rgb-neon-15feb1115b48... | NOK | http://autobuild.buildroot.net/results/4a1609ee314ecb85fc83ccb26d6db629ef737865 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/008f0577c09e5c3a558489284baa9be1adac551b | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/191883d0a46391f6a3fef37d17b532da02f6ef30 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/110ad139707cb79ec020d8b62d4efd3988bb09aa | armeb | brltty | TIM | http://autobuild.buildroot.net/results/af59a5212777f1db040ff10d66cd5d33578a8cfd | arm | brltty | TIM | http://autobuild.buildroot.net/results/a4932bf500ab050d67c9a592ef29690e71da0df6 | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/5030f35f72215a40a2da0199b82a2148d64e489d | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/6d1f9e4c1e93222b0c5df4c907a172b4bfeef20c | mips | brltty | TIM | http://autobuild.buildroot.net/results/7c0ca65e68e003ae9d9423905f7ba7c98088400c | armeb | brltty | TIM | http://autobuild.buildroot.net/results/b3f2b3187e5762dbae9e4a03064ed83083f289b4 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/50be1bc0a55a7e790bf85311e43ed666d57b3b70 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/02f214408e2a78ecbf74e6b350ddc35dce0e23fb | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/2f99d23699048a55220ae8f521819a9212c80096 | microblaze | coremark-1.01 | NOK | http://autobuild.buildroot.net/results/525a782000738e9dd2a61302b69f68d631887178 | sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/1b7db739b51f2b01fb03deb3565267de86e2a3cb | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0af63e880d99c1d9c59e305e10545f6dc63f9810 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7f5d3e474d71af4c9de5ef1220a654a6713d5f04 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2a420c84bc1fd692830c33950b98920b8a62ed79 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/39b4fca8f9b272a32a5d08cd48ccae6fc56e6ff5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e9f415e39853805d62793fec62d14bf9053ed5ab | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/58ef2ba69051f9c8477c9b5e16ea6ecbbe0ebffc | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3857258b304bb31c3a504e1e28474f51552f9a96 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20cb207a625c0fbdc5bda811839323fbfb62bf7 | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 | aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/9d03b2567880651ee441b95ad891101d7b959cef | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c2aeca66514d969f8d0418b366ab7aa5679ac890 | sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a83c9fb6c7314f80124d217f35be43610200e7b6 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bd2ac5bc418e056735fdf9cc5d15c6acdb4d89d3 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8f53b1cbd9febab173d8c486dc6b0748681c1a5b | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bce8a7f27508a2fcc31edcfa8e73c39ce1f4e4ee | ORPH x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/b219ff70fcefa2a4ba7a99c858a7dad1a82aea2b | x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/c5d8e8bbe1a759cafe3126e86266daf7c5ef527a | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5cfe6d54610970b9b6132b639d534aa65af4cf91 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5ce5d6fc6824ce323f646100df44e129ff8ed255 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/c95d66d80b5ad4a5b1a7060ca6afea5ffc65deba | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b72129bc46394b060a21e6cc130417c021f7dde5 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/0fe1deb8e713e70bb49b5ab6e45a7cd59b42863e | ORPH powerpc64le | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e241adaad30e9af4d95eb73101b9b05ad6063b4 | powerpc64 | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ca8b6646322a4cb911fad5fb9cb38046743609bf | mipsel | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/080e24125087c8244ab1b3d9b3fa5fbae3f46df0 | mips | file-5.43 | NOK | http://autobuild.buildroot.net/results/74dfc4380a931e36e975c5a28659eaed9f3cb6cd | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/f2061c87831df51b92248ee15d7690599b25ef53 | ORPH powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/0fdf9c83f813a94332a897e22812334fd3630b7a | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/37b3921e30e3354e03bb240f92b4c5f02461b82c | i686 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/3b9b7834fae468feef574b59b89f4cb3cc76b807 | i586 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/3fb5d86aefabb3c1ce1550792d88f4d3a74bfffa | microblazeel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/c80077fff46f75e70c54f4a1edcc8c562fa288a8 | powerpc64 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/52cffd4a17b514872d1847f5e48a158f761c2d2e | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/69829e3b80b1b7c56416491e0dbc949917d6eda9 | armeb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/226d48412048f38a9df74a3629cdbf4f15fef1d8 | sparc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/58a90d08a7218df0c9d4df858a8418224c0aee0b | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f807eeb2f5c96f961fcb69dec7a814ca41b5461c | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/42b02e2a61236e631669747ba93bcf862f420fca | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/d491eafc5fc623e54130eef1ccbfcd7290a0585b | riscv32 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/16513ec6a9b74a26aff2b72ed02a5173e61ff4ac | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/9717af4ee44fd558ecc8b052c8503e5de5abbff7 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/25ff9bddc0f67071d31555099502d34ea93d0029 | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/810efbb0ab431857d2ace8311f00191fa176ec08 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/f7c99deb2fa41644b3479eb34e7eca6c6fcd718f | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/892b180ca2bbeabff3ae95b55a35bd0fbaa7d375 | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c60690c535ea283eba5ef01de7060166b9a085fa | sh4eb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c7fdfe1238bcd1efe3ac4accea63f08796af6495 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4c9ccb75b84d45818d04ad3aa9e4dbe1a2729d53 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/ee77429754a9eb646274f0309ccc7f83cb01ef6b | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/d118cca989b0c3303038e6d61a6b8f185674f785 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/404bf5f8701af33f7bae6b1686f2800e16186fc0 | ORPH microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/2933770e4869f7f552ae34979cb72c4cd8bd9e46 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0bed5cb9bf343403c660e3daab33c1fbd43a8412 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0ccdc546b1694f3688cf2cef4d3e28b57ea8dec3 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/f40534aafdecf5f9ab22008939a27bc1ad45b45e | i586 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/36714e14fd33a2915a0dcb3fd1cb35daaff6d803 | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/0ed921f9be8ce211cb0e498a1c57a4bc9d39a0f0 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/cee006cb0ee0485d1e5ca1164edd2ed5b582f4aa | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6f96133c969ab5954b1998573465bd396855f6b8 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5abaccf29b8b4016cf3342f2ed4bf4d3830acd64 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5ae8a6fb46bbdbf58c0142338a07d581a463a9c3 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/930b554d140ac7c03f0dd1a441a302ad215ba63c | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8b6be1d63309b990f4acd67e82c3c589b762cec6 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ff32ebcf80463421d2d78eadd4e46de3069d6553 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4165bebe832f8c984454025d0d83e621c319ec3b | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/14b2a62ecdee4d611aee4c653778e52bbcd407cf | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ecdd653cb1e1a4cdec5dd93403480b700f154453 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/630d412d718789162f5351df3e673051a9d1ab81 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/261e50c50c21aa59c4fda51f49ff70f563382257 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/6ccef34e715602b51fe013fab6d4875e52436b3d | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/3fa6010add4b03f825bc2956d567a27d474efa9a | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/33bbe6a034a0685c646ac503abe7d90fde06d559 | aarch64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/854a62b2a766d35f636f1001ffd1cb8199a46e61 | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/05c6bd338859837c8155acb0065064ff1036aee2 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6e3d66c9b3ae02eee50d56fe57fe5a5eab6fcd29 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bcdbb6b30748c7b10c3e202b3cefc45166eeb139 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/881a9a1195cd751bc2117ecfd85ba4c4a63dd2d1 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bbe30d9795dade202281221e4e2daef0f8f3073c | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b983339daf4165784e762858366cf0391449e2d | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4a008ffc39539a42fbb446f7300e4e72f0b68184 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b6b2311d0ebb3c408f97311c18629176d3373b26 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/332b5f502cb20bda2e97709222499e2ef1573b54 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3f5d651bfa7773c28a733d302a288d7e0ac0418 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9c1d2b7a37a762d2fdb3fccd468b52303daa32c0 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4477cc2abd8e17a16fc7eb6da6c1d9aaec87c0e8 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/863e6a0f89e32ed5a5e2510475a2325349f4af8e | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19a136708dc7d27eae1a3e77496e957fb51e19de | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/49c58a9e59f199a7b8ce2acbf39325b9f801f8d0 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c4299f0aa4b333812d2a5d449de7f646109fe497 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5ae83dc81551aa42df06d21563a0cddba992a54a | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/75ef709d287f58f4b2fda805950120ccf45b9e05 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8a5adaf6649c1c1f3cd8dac4ad90a63c96bee751 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b2d4265b83c7d49d9d1002bf4068a7f99a7a4dbc | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/85f1caf23c4f33ce4db5760eef17903dc07a0f03 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9ca80ef3a841d2c9e02939fce1723d5a85c78b5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c55bfd64282e008008950ec8e035a5650dba2faa | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/810275033ef6a257a6eaec7717edbba949ed14c9 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d51899ff8dd1145f51b6afafeee163fc4dcc6133 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0c164cb5f06fdc0f284ce6014d79dde343c8da15 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/7a3d0fdc64185bc0cbb633766aba10d9955f430b | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/ffbfd6a3d256a9b32ad86b0a659daa215b0c7f36 | ORPH mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/1d46801b72cf911caa7b64f297757fe7711e1f59 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/e127a89367f95e812c210d1aca8b148d6e322aa0 | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/3c49787e8c36fb42a280c9bf1a4b2132c8b5d4a4 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/5570acab8cd73a711c1c32bc74e129ed35c3d8c9 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/04cc8008c76b85d9a925e9a4b4309837728eecc7 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/a12f8dfdfb6138fc9c37bfc1e7af5d10e10dc18f | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/1bbfe982e6469ca9408ee9c48cbfef472e78bf7f | aarch64 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/acc932b042ceb8eb2514f3c96f423a89b52742b5 | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/00ab6c6e8ecb63f82c81eae50d716c562f422508 | m68k | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/30a28df85af6288559d413d5d8fd4514c0f8fa40 | or1k | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/ae61bdb808d81d3144baa908c771e65d60d0b995 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ab8b75eee5e0a5389d006580581d7d4b65501b92 | sh4aeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e1fde334b14b15ec11bd93e2ada07c742be3c9d9 | riscv64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/add0a55aeb836d617099f0721e413cea1e310266 | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f19ffff903fd833bb05de3fafda5ffc5374a794a | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/d0d0ebfe45e260152519770323823aa3604c1b46 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f53c5b96ddd9ed9264a784c9f2e128b9f058e2a9 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6c769b7a00e4e41e4bd989c85b34bc98f3e964e3 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/21cd591ea6421c5003f83da997a72bb9b9fb4df4 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/672be05f17a7a16dabaa7b48835939b8be035680 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/eff6eff2736e15e2a9eb438b34bf0d3105c7bd20 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/16c193ef47533844224d02face08a15fc96d9e57 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/188ebbf00b591d2f288ecaedbcfc45904f84a5f2 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/63309b8152ce8546225f371227d857805e3c3612 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6504529a3d2761633799afdc866b232170b8459d | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/25702894cd07bf1149775e650991d5b90fdeb23d | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f47514dbfa710c623b4006ceb6b417df2709252b | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d27bf227d50ea8180c0a04f49e276ab26dd50477 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/92f5536369f74fbc949017db3a540f12b8d3f028 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8fb340f5606695dfc4c684bda2090e17899e98ee | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b91652916e41b2d7cd36b1534f5e0aeeb4d551b | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/daad80010654253c5c4edbfe520c8e01b0e808a0 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a56c3f6c52f169c9b6a8ffd8c78b85ea2154af1d | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/20f13fcead0a12c261e9344fcf79cd3f58f73eec | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6eb322a7b8553f38105b938dacc9f86c75d321a9 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e17e703f51a0e2c40f4fae4002d1c93254dfc54 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/da9ff9ba70f14f4c66af2729f378fee57871c1ce | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/37987b2a6723cb82973a91219460b7e0aaea9f08 | ORPH i686 | host-wine-7.0 | NOK | http://autobuild.buildroot.net/results/00a4df4f371441181b780966ae74b57f24b6c242 | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c48483ca25818696eedb59fc4418c55fd3a8dd12 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e73080a26532ceb7640f2b04bbf2b3257c57dde5 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cb1833e6d8d5d669ec0f75b717150e36640c15e8 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/186b743da18963c06a42835b89dca85e69fe6bd9 | sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1989b1731ad1c81ffa719fc1825a7d310ad6b29d | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/835779a59c212bfc6df55ecd2c4edd87519d7b40 | ORPH arceb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1bbc4c0c74db4eeb06e605267bdb974b8a231d2c | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/9651fc548c0d57d7624adf06ba0c677c468fbf48 | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1e9682e165a35b7c32585e3988c4986d63522b52 | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/e0ff7b25d82b8e915ef03cf85cfdc53a2c9618e6 | ORPH mipsel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/edc5e3b04ce6ba40eabcc2a7e391b0d05ac05485 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/63afe69f5e953ba1f28719a59074487a589a631a | ORPH powerpc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/357bc050db19f28b5fd13272a3acd2becf78603d | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ff8290e31355df13617a6b8730e44d6aaa687ab1 | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/a754a29ea156105276d3d5426c5b8e6dec77a8ad | ORPH microblazeel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/0a0572ef699a2d49539f3837c168e1281091571a | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ea23167f2b1b6c64309f23ef1511f4bf2177bd18 | ORPH nios2 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/5f3f5cb05896612bebef67cbb5e8e71041e5bb6a | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/249b11bae9b966c5c0f226db31cb6a7d0c60a82d | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/dae0763d5b66f51872fbafd5b6b5f9239c5b74c2 | ORPH mipsel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/c6d128f3b6a854d5e902e25b19fc947983994f2b | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/2a3a32ff0bf541789d010e722d440da5b137ba99 | ORPH arc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/556fd1203788f53d981e3740f3259886616f77f2 | ORPH sh4aeb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ccc9390e8852c3fecfcb5724b89d6e87e9e9912a | ORPH powerpc64le | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/b27e94e6853989098552bde4ef78e71732d98623 | ORPH i686 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/068b65189c163f69eaa142f705e068cfb9316535 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/8dc88bdca0dfb5a04f61d30ff2f963d40f2b5112 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/8d761820e1261dedceda8979ad6ade31d3359d9f | mips64el | libapparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/17cabe6a598b32e1ff5510c211d2921bf86091f1 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/afbdbc3c232deafa7215ab9560530dde38f03f66 | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ca8af5f602fd23a91e3a5bcf99573d780f6f05ca | sh4aeb | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/2f3635d31fe74ef81562d87623b37285be0885c6 | s390x | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/9c1d0fec1ff932de03d562aa1b43921270a6bece | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/46e93c47b70712fc2b0a1f0dd8ad03a4655ea640 | nios2 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/243e455e630137c72393d242c7861f5aa7218142 | arc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/9b27298246f74ec278f88df4b06ba23b536d9387 | arm | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e96f2aaa52bfe1d7e92547ae59d8478ef1a7af98 | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ec9c31d1ef1a68b584dfae362386ea350af5e5b3 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/3cc0ab42153e48824e5ee65c3c7bf09c0ee64432 | s390x | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/56cde370c30ed4c3aaa9aae35ab87e7d8967396f | mipsel | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/cccc29cfa74a285381f9ab309b15fa8739b93048 | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a28572304faeea97d44af43fdc9e41283d486ea1 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/0f6d5163f69181b57db63ebeed3052d946d34bc2 | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/77ac4b4ceb72cfc656edaa098bffb5ee0a383d14 | arc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/db18a8139712bea7751eee012c67a17710e3efdc | mips | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/226db7ecaf55be8a703c7a585373c9bd0458ff34 | arceb | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/d2cd4305a387d642594d6aa32efde25f620d97a0 | powerpc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e5f97029b080b5b76fa59624ee1a3fed7ce2e621 | microblazeel | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/65559559425dd0d7764725be6baf91758c6cabfd | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/814dd72ac50092d218922166932d8433b920c197 | armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/c965bb762f949dfc80066d631d28badf46f78381 | aarch64 | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/ecd08ad970da0bdc7428b7f9ae5deebb0d617579 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/eedbcd542e8690b42ef79b9af1505a1c986340df | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9062017e0bc761e416a4d071d7874745a7ef75da | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2a797f0a91377a05fe621d0a5bcfd2b7403b4a4b | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ae591548efeab20c85ac182f9bf4b5bca8e16139 | ORPH mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/a5e63604cd2c6aae4a86e0ea3d1967ce02647b79 | ORPH nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/08ab4cbf1f123062cbbc83bb36d335fc2d7be877 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a70ac5973f8a24d4965c0a73c7fa5dd833585392 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b2986f4090993ec1d4ced82093a99761a57777d8 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/56bafafd49837bb2210e0f55dd1c51fa5e52df88 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ce4e83e26a5cac950231ae06970c9cd3b43d7d4f | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6ffe577378f17ea3e010d293dd4a2e92b972e5cb | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f38dac8173197cd4d9399a413f403467536beeed | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/79239df7d6af4bacf51976746c838260f285f8d0 | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3c938d4bc15ded09bd86c03d6db37fb879463edd | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/298a31b242e3d45d04fdbeb0311c63e77de9adc1 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f61c80514cf303fd71f0be3915900e6cc981159d | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c0d8f56969fa14423806c83b2e5a92bee91b4070 | mips64 | libpcap-1.10.1 | NOK | http://autobuild.buildroot.net/results/c0783fa76546276534a45103372cd137a4418a00 | or1k | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/85fb2cb7fe4f63fd85ae127fb4934a0fa974922d | ORPH aarch64_be | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/815b68e6ec5227ac031c0fcfccc5777e803e50b7 | ORPH x86_64 | libxml2-2.10.3 | NOK | http://autobuild.buildroot.net/results/1d641f0e880ae4d835c87de997865cfabfabd878 | nios2 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/1ff441d1d84e4e15490ebdf61c6fbcfe9304459b | ORPH sh4aeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/c9db57710f9dc53bc45793b3879cbb21ac1f1696 | ORPH powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/734e17c9791dba0b3a5eb10fb4ee1c8fb6536b73 | ORPH nios2 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/590bed640b3bea55e1fa2b4679daf8e02516dc5e | ORPH mips | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/e763d65053932d74f8b0b9ac164f2d6adcf5de22 | ORPH sh4a | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c65070dc2b9edf4f9457d119b10ee9a0a2d4fcfa | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ab861babc7efbfe48a9a78e7b20368da147bac83 | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6a9e4dd6ad8e3b9dd69eb5f1748f2446935b6d33 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bcaeefe023ab934b7fd83f79d52a9afa26e0a137 | ORPH i686 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e56411a0b0fd36c002b0b8139f294506bda27b7b | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3d02d83d597b619c99882f54b7be29d43c5309a2 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f0b08ba4329aa513a57fddb28f56b1dbb2e51731 | ORPH i686 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/bcf0568d16765210b8b09ddd755ff3505456eca7 | ORPH mips | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f8c5bc3d14c6cd9a7a89866b1a6b048a8da2db34 | sh4 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/98cc8b67171ca8d7adf8b1d777f7682b8edab09f | x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/9569c72bc5b10c1a16f194550d8259bb6b88afc3 | mips | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/5b6400aa6099da8722e6607277a03a4cc6951dc4 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/01841fde1448a03b7e9c97126fcc3d79ac380d8d | mips | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/077a21a3d2d95b5b44f872154771dcf69293ac35 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/c6d4749cf0e9281ef3c3b0aa86b2aed86fb86c75 | mips64 | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/3154f1f65878cb08d8d2f9c20000f5e55257c1ce | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/21f91531ce60dfd020ea47150150c9d5320360f6 | microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/b13fc5fc61bef5c4eb5d962a91964267d4901907 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/a6227df547857ce98ecce38b9e779e682bc415e5 | ORPH sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/ce403baa9e2825f73ca0d4367f8c5a4e31d44ab7 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/df821eb8993439931e9388ea4f89b385507bfb34 | ORPH x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3ccd67331b0a8b53abe98cef122135f55e7496c1 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/98f44fc501195a6c42c263ef998974fd02862876 | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cac8de34db9fdb23f485d9591a5409ec6ddd066a | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/375d379b2cb53ddbbea0ccf9de778a5f7c870267 | microblaze | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/767fb5f777da26e0bc69e93c46b152a4d990fbca | ORPH microblaze | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/60e45e0193ecf0eb8e2ee997d17b048f7f70b77f | ORPH nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/ce1d9dfe61369c82dc78a5709201f4b8b6fb1cf2 | mips | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/52636ab1754844d6f05ad83cf895885147e983c7 | sh4aeb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/9129443fd0d2978ec94cb4cd926bd0ec8d90e2ef | x86_64 | rabbitmq-server-3.8.2 | NOK | http://autobuild.buildroot.net/results/2fd3ac98f717969f74db9730be24d5fa582cf2f6 | sparc64 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/033bc943471898a71f0fe2779642b407106a29ce | powerpc64le | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/d48b4eb65ef2e1b149f4ba9de48c9c5ac795ba73 | mips64 | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/fb7ae85a850419ec6d264c3cee8cc2add65d9114 | ORPH riscv32 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/69ae53c8c9765942514209200ebeecf585c4387a | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/9c24a220d093950965329300396799ac3bb91351 | ORPH powerpc | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/df0a4036b1d1de5a23dc85f9abf6736649f1a098 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/f0a44d9127500ee836ba84178e019e256c70a4f9 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/8d5d33c9ce03ac23f2e0f78c5357bd6f5c5aef75 | mips64 | uclibc-ng-test-6790eafe897b... | NOK | http://autobuild.buildroot.net/results/7f1a47cea7c05d9217a515c04faf2487220ec846 | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/8690f39f7ac9c7a09ca64f4596508b19756e8970 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/766f9a109e35d16e190dd4f839ebca80fbab92fa | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/0e34ca3d412d7c0e12a6aa78b4181589cf0a72d9 | mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/755abd894d26b72d9c6c95626931d71a4b6afd58 | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/f381393593bd3622e123279383006d1d4a4c0a02 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/fabc71cc307d1371bcad3a6b4d0e68334bce9e5d | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/5796bd3d3c1857d47de2cf6efd39d6e27c41c756 | microblazeel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/2303a1621ea91f61541279461a899d8e306de743 | aarch64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/e79a55b5e7251829008a4af40b67bed8bbc4b661 | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/a3b5c7b519d29398116c228dbe99544ac47cdc88 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bcedca23c7dd6127497e4443e4cc7e59dfdb7473 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d2d7c7e273e135d01a13b0afcf4f8b715ff162c0 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d13b6e04220e4c70726e30bbf08f729585d46652 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6e1b1ed0f4d49c74f98646b7a7fb2d270110df1b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/ff279644b73e6f1bf6d3d64d41a4dc1ea933e849 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/bea5803810284d7a40bc1be8f197ab3fe21ddc16 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/1c01579e4e4d368e47ccef805601549e301e0e9d | Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 4 host-rust-1.62.0 | 2 crucible-2022.05.25 | 1 dhcp-4.4.3 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 libglib2-2.72.3 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 tcf-agent-1.7.0 | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/4b5bd8dd9947edbd59471b85b652db0fce830f17 | xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/11a8b2503be3f38e11461cb6c1caf514e2624a6a | ORPH mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/143b3580a979cc39c9c0b9787b469348ae63c358 | s390x | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/bc23af27436a7bf7a5eb6b898cf976a11998665b | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/50c5aa131127849b2c7d748ab17d43bc832efc5b | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40d6e0aa3bdd0d268fce05c8ed81bcd55bc79ea7 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/10a3f871cbb94a0a02f7e752f610d9f29953b6d0 | sh4aeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/199ad0d27ec15342dfe358b76ac6a6417f8a4d02 | ORPH microblaze | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/657199763f44d433c9b247f7f6cb678c488990ff | ORPH s390x | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/b15e8473dbf447e16b77f183543b90cc60306d00 | ORPH or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f695c24d6e013a0566af0baf44eb74b1b2d7671b | ORPH powerpc | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/30f204acd57622ceb99c86291a40bb9235166e32 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/c4133c219dde89abf9a89fea6cf71de172c2eee7 | sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/7d51f6677cc21bd2bd5ecad792e7ff6ab0867682 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 30 08:30:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 09:30:33 +0100 Subject: [Buildroot] [PATCH 1/1] package/gcc: ensure __register_frame is optimized out for glibc In-Reply-To: <20221028223844.1180418-1-james.hilliard1@gmail.com> References: <20221028223844.1180418-1-james.hilliard1@gmail.com> Message-ID: <20221030083033.GC1058960@scaer> James, All, On 2022-10-28 16:38 -0600, James Hilliard spake thusly: > On some architectures when building with -O0 the __register_frame > symbol fails to get optimized out which can cause linking failures > when building glibc. > > To fix this set -O1 for GCC target libs when building with glibc > and BR2_OPTIMIZE_0 on the problematic target architectures. > > Fixes: > - http://autobuild.buildroot.net/results/89b/89b6c6924240b7cf82035a844f3573673e91b364 > - http://autobuild.buildroot.net/results/46f/46f4ec99d2b23d354a4bb5e92123d64f0da6ed27 > - http://autobuild.buildroot.net/results/839/839f929f700cf181ebdf34389c7806a96f55813e > - http://autobuild.buildroot.net/results/0e2/0e202bf53a683930f3cad6edef2a4dea629eaecb > - http://autobuild.buildroot.net/results/8a8/8a8c917f597fdcca744e696e19e9300b64004335 > - http://autobuild.buildroot.net/results/c05/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 > - http://autobuild.buildroot.net/results/8ba/8ba8882a861cf7df359c23969c09b2be0725b2e5 > > Signed-off-by: James Hilliard > --- > package/gcc/gcc.mk | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/package/gcc/gcc.mk b/package/gcc/gcc.mk > index ec6f3b550a..a339f77970 100644 > --- a/package/gcc/gcc.mk > +++ b/package/gcc/gcc.mk > @@ -103,6 +103,15 @@ GCC_COMMON_TARGET_CFLAGS += -matomic > GCC_COMMON_TARGET_CXXFLAGS += -matomic > endif > > +# Enable GCC target libs optimizations to optimize out __register_frame > +# when needed for some architectures when building with glibc. > +ifeq ($(BR2_TOOLCHAIN_USES_GLIBC)$(BR2_OPTIMIZE_0),yy) > +ifeq ($(BR2_microblazebe)$(BR2_microblazeel)$(BR2_mips)$(BR2_mipsel)$(BR2_nios2)$(BR2_or1k)$(BR2_sh),y) > +GCC_COMMON_TARGET_CFLAGS += -O1 > +GCC_COMMON_TARGET_CXXFLAGS += -O1 > +endif > +endif Should this not be limitied to the intial compiler only? Otherwise, why would we need it for the final compiler? Regards, Yann E. MORIN. > # Propagate options used for target software building to GCC target libs > HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)" > HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)" > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yegorslists at googlemail.com Sun Oct 30 09:11:56 2022 From: yegorslists at googlemail.com (Yegor Yefremov) Date: Sun, 30 Oct 2022 10:11:56 +0100 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: <20221029080229.GA24217@smart-All-Series> References: <20221025065539.4646-1-afshin.nasser@gmail.com> <20221026102255.GA602@smart-All-Series> <20221029080229.GA24217@smart-All-Series> Message-ID: Hi Nasser, On Sat, Oct 29, 2022 at 10:02 AM Nasser Afshin wrote: > > Hi Yegor, > > On Wed, Oct 26, 2022 at 08:21:30PM +0200, Yegor Yefremov wrote: > > Hi Nasser, > > > > On Wed, Oct 26, 2022 at 12:23 PM Nasser Afshin wrote: > > > > > > Hi Yegor, > > > > > > Thankyou for taking time to review my patch. > > > > > > On Tue, Oct 25, 2022 at 10:33:19AM +0200, Yegor Yefremov wrote: > > > > Hi Nasser, > > > > > > > > On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > > > > > > > > > Signed-off-by: Nasser Afshin Reviewed-by: Yegor Yefremov Best regards, Yegor > > > > > --- > > > > > package/Config.in | 1 + > > > > > package/python-pycrate/Config.in | 8 ++++++++ > > > > > package/python-pycrate/python-pycrate.hash | 4 ++++ > > > > > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ > > > > > > > > An entry to the DEVELOPERS file is missing. > > > > > > May you help me to whome this entry should refer? > > > > You should add yourself as a "maintainer" of the package you add. Just > > look at other entries. > > > I have added myself as a maintainer of this package. Thankyou. > > > > > > > > > > > > > 4 files changed, 26 insertions(+) > > > > > create mode 100644 package/python-pycrate/Config.in > > > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > > > > > diff --git a/package/Config.in b/package/Config.in > > > > > index 56b1a08d8b..2443b7bb27 100644 > > > > > --- a/package/Config.in > > > > > +++ b/package/Config.in > > > > > @@ -951,6 +951,7 @@ menu "External python modules" > > > > > source "package/python-pyasn1-modules/Config.in" > > > > > source "package/python-pycli/Config.in" > > > > > source "package/python-pycparser/Config.in" > > > > > + source "package/python-pycrate/Config.in" > > > > > source "package/python-pycrypto/Config.in" > > > > > source "package/python-pycryptodomex/Config.in" > > > > > source "package/python-pydal/Config.in" > > > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > > > new file mode 100644 > > > > > index 0000000000..9e2123d4dd > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/Config.in > > > > > @@ -0,0 +1,8 @@ > > > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > > > + bool "python-pycrate" > > > > > + help > > > > > + It provides basically a runtime for encoding and decoding data structures, > > > > > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > > > > > + network. > > > > > + > > > > > + https://github.com/P1sec/pycrate/ > > > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > > > new file mode 100644 > > > > > index 0000000000..24aa51d8e4 > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/python-pycrate.hash > > > > > @@ -0,0 +1,4 @@ > > > > > +# md5 from https://pypi.python.org/pypi/pycrate/json > > > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > > > +# Locally computed > > > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > > > new file mode 100644 > > > > > index 0000000000..41ce6c18f2 > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/python-pycrate.mk > > > > > @@ -0,0 +1,13 @@ > > > > > +################################################################################ > > > > > +# > > > > > +# python-pycrate > > > > > +# > > > > > +################################################################################ > > > > > + > > > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > > > +PYTHON_PYCRATE_SETUP_TYPE = distutils > > > > > > > > SETUP_TYPE is setuptools. > > > > > > > > Have you tried this command? > > > > > > > > ./utils/scanpypi pycrate > > > > > > > > It will do almost everything you need. The thing that is missing is > > > > licensing info because there is no license file in the source archive. > > > > > > Thankyou for pointing this out. Now I send a new version, using this > > > command and also adding licensing info. > > > > > > > > Best regards, > > > > Yegor > > > > > > > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > > > > > + > > > > > +$(eval $(python-package)) > > > > > -- > > > > > 2.17.1 > > > > > > > > > > > This is the second version of my patch. > > > > > > From 979beabd86f1c15d159e37136bc9591fb39b844e Mon Sep 17 00:00:00 2001 > > > From: Nasser Afshin > > > Date: Tue, 25 Oct 2022 16:06:53 +0330 > > > Subject: [PATCH v2] python-pycrate: new package > > > > > > Signed-off-by: Nasser Afshin > > > --- > > > v1 -> v2: Added licence file and its checksum > > > Used ./utils/scanpypi pycrate tool to be consistent with > > > others > > > > > > package/Config.in | 1 + > > > package/python-pycrate/Config.in | 6 ++++++ > > > package/python-pycrate/python-pycrate.hash | 6 ++++++ > > > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > > > 4 files changed, 27 insertions(+) > > > create mode 100644 package/python-pycrate/Config.in > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > diff --git a/package/Config.in b/package/Config.in > > > index e3a34d6e97..a6fcc72cc8 100644 > > > --- a/package/Config.in > > > +++ b/package/Config.in > > > @@ -1168,6 +1168,7 @@ menu "External python modules" > > > source "package/python-pycairo/Config.in" > > > source "package/python-pycares/Config.in" > > > source "package/python-pycparser/Config.in" > > > + source "package/python-pycrate/Config.in" > > > source "package/python-pycryptodomex/Config.in" > > > source "package/python-pycups/Config.in" > > > source "package/python-pydal/Config.in" > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > new file mode 100644 > > > index 0000000000..193a973f7e > > > --- /dev/null > > > +++ b/package/python-pycrate/Config.in > > > @@ -0,0 +1,6 @@ > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > + bool "python-pycrate" > > > + help > > > + A software suite to handle various data formats. > > > + > > > + https://github.com/P1sec/pycrate/ > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > new file mode 100644 > > > index 0000000000..8ad33370b4 > > > --- /dev/null > > > +++ b/package/python-pycrate/python-pycrate.hash > > > @@ -0,0 +1,6 @@ > > > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > +# Locally computed > > > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > > > + > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > new file mode 100644 > > > index 0000000000..c0da152656 > > > --- /dev/null > > > +++ b/package/python-pycrate/python-pycrate.mk > > > @@ -0,0 +1,14 @@ > > > +################################################################################ > > > +# > > > +# python-pycrate > > > +# > > > +################################################################################ > > > + > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > > > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > > > + > > > +$(eval $(python-package)) > > > > The patch looks good now. Thanks. > > > > Best regards, > > Yegor > > This is the third version of the patch: > > From de6e28885836a6d9a5347a083a68055098508583 Mon Sep 17 00:00:00 2001 > From: Nasser Afshin > Date: Tue, 25 Oct 2022 16:06:53 +0330 > Subject: [PATCH v3] python-pycrate: new package > > Signed-off-by: Nasser Afshin > --- > v1 -> v2: Added licence file and its checksum > Used ./utils/scanpypi pycrate tool to be consistent with > others > v2 -> v3: Added myself as the maintainer of this package > > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/python-pycrate/Config.in | 6 ++++++ > package/python-pycrate/python-pycrate.hash | 6 ++++++ > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > 5 files changed, 30 insertions(+) > create mode 100644 package/python-pycrate/Config.in > create mode 100644 package/python-pycrate/python-pycrate.hash > create mode 100644 package/python-pycrate/python-pycrate.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 6e0b765ba1..a1b48fd45c 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2157,6 +2157,9 @@ N: Murat Demirten > F: package/jpeg-turbo/ > F: package/libgeotiff/ > > +N: Nasser Afshin > +F: package/python-pycrate/ > + > N: Nathaniel Roach > F: package/bandwidthd/ > F: package/libgudev/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..a6fcc72cc8 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1168,6 +1168,7 @@ menu "External python modules" > source "package/python-pycairo/Config.in" > source "package/python-pycares/Config.in" > source "package/python-pycparser/Config.in" > + source "package/python-pycrate/Config.in" > source "package/python-pycryptodomex/Config.in" > source "package/python-pycups/Config.in" > source "package/python-pydal/Config.in" > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > new file mode 100644 > index 0000000000..193a973f7e > --- /dev/null > +++ b/package/python-pycrate/Config.in > @@ -0,0 +1,6 @@ > +config BR2_PACKAGE_PYTHON_PYCRATE > + bool "python-pycrate" > + help > + A software suite to handle various data formats. > + > + https://github.com/P1sec/pycrate/ > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > new file mode 100644 > index 0000000000..8ad33370b4 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.hash > @@ -0,0 +1,6 @@ > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > +# Locally computed > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > + > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > new file mode 100644 > index 0000000000..c0da152656 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.mk > @@ -0,0 +1,14 @@ > +################################################################################ > +# > +# python-pycrate > +# > +################################################################################ > + > +PYTHON_PYCRATE_VERSION = 0.5.5 > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > + > +$(eval $(python-package)) > -- > 2.17.1 > From fontaine.fabrice at gmail.com Sun Oct 30 09:27:49 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:27:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/jack2: bump to version 1.9.21 Message-ID: <20221030092749.43292-1-fontaine.fabrice@gmail.com> https://github.com/jackaudio/jack2/releases/tag/v1.9.21 Signed-off-by: Fabrice Fontaine --- package/jack2/jack2.hash | 2 +- package/jack2/jack2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/jack2/jack2.hash b/package/jack2/jack2.hash index 6361473cf7..c98971ca1c 100644 --- a/package/jack2/jack2.hash +++ b/package/jack2/jack2.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 915ad2900992159bdb729b9fc4ea134b962ce32b2df0b384fee40a2c5808835d jack2-1.9.20.tar.gz +sha256 8b044a40ba5393b47605a920ba30744fdf8bf77d210eca90d39c8637fe6bc65d jack2-1.9.21.tar.gz sha256 d8c320ffc0030d1b096ae4732b50d2b811cf95e9a9b7377c1127b2563e0a0388 COPYING diff --git a/package/jack2/jack2.mk b/package/jack2/jack2.mk index 9d6a3b6479..f7683304a6 100644 --- a/package/jack2/jack2.mk +++ b/package/jack2/jack2.mk @@ -4,7 +4,7 @@ # ################################################################################ -JACK2_VERSION = 1.9.20 +JACK2_VERSION = 1.9.21 JACK2_SITE = $(call github,jackaudio,jack2,v$(JACK2_VERSION)) JACK2_LICENSE = GPL-2.0+ (jack server), LGPL-2.1+ (jack library) JACK2_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:28:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:28:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpagekite: bump to version 0.91.201110 Message-ID: <20221030092832.43581-1-fontaine.fabrice@gmail.com> https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 Signed-off-by: Fabrice Fontaine --- package/libpagekite/libpagekite.hash | 2 +- package/libpagekite/libpagekite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libpagekite/libpagekite.hash b/package/libpagekite/libpagekite.hash index 8716b991ca..2c2e5c9b59 100644 --- a/package/libpagekite/libpagekite.hash +++ b/package/libpagekite/libpagekite.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c812815aae6f100212b7d6f662370a0634151fabb59f028126a59c4083a6d26d libpagekite-0.91.190530.tar.gz +sha256 db835d49becebc00d462f2f47aefc1f1d3a4e0e096487cb3b4248134185df715 libpagekite-0.91.201110.tar.gz # License files, locally calculated sha256 ba443b9c9d4273d06aae3e147e9ad1ec199cc9c23455f486a039536d47f57eed doc/COPYING.md diff --git a/package/libpagekite/libpagekite.mk b/package/libpagekite/libpagekite.mk index 60b62f5cfd..bb235ba1f3 100644 --- a/package/libpagekite/libpagekite.mk +++ b/package/libpagekite/libpagekite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPAGEKITE_VERSION = 0.91.190530 +LIBPAGEKITE_VERSION = 0.91.201110 LIBPAGEKITE_SITE = $(call github,pagekite,libpagekite,v$(LIBPAGEKITE_VERSION)) # pkrelay is AGPL-3.0+ but is not built -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:41:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:41:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/libmodbus: bump to version 3.1.8 Message-ID: <20221030094155.53225-1-fontaine.fabrice@gmail.com> Switch site to get latest release https://github.com/stephane/libmodbus/releases/tag/v3.1.8 Signed-off-by: Fabrice Fontaine --- package/libmodbus/libmodbus.hash | 2 +- package/libmodbus/libmodbus.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libmodbus/libmodbus.hash b/package/libmodbus/libmodbus.hash index b676d261de..83b0c3a012 100644 --- a/package/libmodbus/libmodbus.hash +++ b/package/libmodbus/libmodbus.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7dfe958431d0570b271e1a5b329b76a658e89c614cf119eb5aadb725c87f8fbd libmodbus-3.1.7.tar.gz +sha256 b122f2bc29f749702a22c0a760a7ca2182d541f5fa26bf25e3431f907b606f3c libmodbus-3.1.8.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LESSER diff --git a/package/libmodbus/libmodbus.mk b/package/libmodbus/libmodbus.mk index 46eb860392..2f8c1735da 100644 --- a/package/libmodbus/libmodbus.mk +++ b/package/libmodbus/libmodbus.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBMODBUS_VERSION = 3.1.7 -LIBMODBUS_SITE = http://libmodbus.org/releases +LIBMODBUS_VERSION = 3.1.8 +LIBMODBUS_SITE = https://github.com/stephane/libmodbus/releases/download/v$(LIBMODBUS_VERSION) LIBMODBUS_LICENSE = LGPL-2.1+ LIBMODBUS_LICENSE_FILES = COPYING.LESSER LIBMODBUS_CPE_ID_VENDOR = libmodbus -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:52:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:52:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/liblinear: bump to version 2.45 Message-ID: <20221030095228.59110-1-fontaine.fabrice@gmail.com> Version 2.45 released on August 11, 2022. Some minor bugs are fixed. Drop first patch (not needed since https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) https://github.com/cjlin1/liblinear/compare/v244...v245 Signed-off-by: Fabrice Fontaine --- ...0001-blas-don-t-overwrite-ar-options.patch | 36 ------------------- ...-lib.patch => 0001-build-static-lib.patch} | 0 package/liblinear/liblinear.hash | 2 +- package/liblinear/liblinear.mk | 2 +- 4 files changed, 2 insertions(+), 38 deletions(-) delete mode 100644 package/liblinear/0001-blas-don-t-overwrite-ar-options.patch rename package/liblinear/{0002-build-static-lib.patch => 0001-build-static-lib.patch} (100%) diff --git a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch b/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch deleted file mode 100644 index 23ed6dd227..0000000000 --- a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cae4c3b80fee0f3637d70f6d33946888c8105637 Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Sat, 13 Dec 2014 17:16:58 +0100 -Subject: [PATCH] blas: don't overwrite ar options - -ar's rcv options get lost when AR is passed on -the command line. - -Signed-off-by: Romain Naour -Signed-off-by: Fabrice Fontaine ---- - blas/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/blas/Makefile b/blas/Makefile -index 895fd24..78cec9a 100644 ---- a/blas/Makefile -+++ b/blas/Makefile -@@ -1,4 +1,4 @@ --AR = ar rcv -+AR = ar - RANLIB = ranlib - - HEADERS = blas.h blasp.h -@@ -8,7 +8,7 @@ CFLAGS = $(OPTFLAGS) - FFLAGS = $(OPTFLAGS) - - blas: $(FILES) $(HEADERS) -- $(AR) blas.a $(FILES) -+ $(AR) rcv blas.a $(FILES) - $(RANLIB) blas.a - - clean: --- -1.9.3 - diff --git a/package/liblinear/0002-build-static-lib.patch b/package/liblinear/0001-build-static-lib.patch similarity index 100% rename from package/liblinear/0002-build-static-lib.patch rename to package/liblinear/0001-build-static-lib.patch diff --git a/package/liblinear/liblinear.hash b/package/liblinear/liblinear.hash index 27aa4e3e87..6bc72909d0 100644 --- a/package/liblinear/liblinear.hash +++ b/package/liblinear/liblinear.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 45572b99d4eeffc3e8ad7b72c27370be867edf3523c396d8b278a2c873bfbb5c liblinear-2.44.tar.gz +sha256 3c64eec45c01943a656baac7aeb8ffd782fe0aea53629aa9f5fdb8eec177c92f liblinear-2.45.tar.gz sha256 d49b7898fd9ea7c29f0478e8c409ee7c0f621533d5eca7b7912e80391dc564e3 COPYRIGHT diff --git a/package/liblinear/liblinear.mk b/package/liblinear/liblinear.mk index c100ccc6c5..014f9e2de4 100644 --- a/package/liblinear/liblinear.mk +++ b/package/liblinear/liblinear.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBLINEAR_VERSION = 2.44 +LIBLINEAR_VERSION = 2.45 LIBLINEAR_SITE = http://www.csie.ntu.edu.tw/~cjlin/liblinear LIBLINEAR_LICENSE = BSD-3-Clause LIBLINEAR_LICENSE_FILES = COPYRIGHT -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 10:09:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 11:09:04 +0100 Subject: [Buildroot] [PATCH 1/1] package/libnl: bump to version 3.7.0 Message-ID: <20221030100904.76419-1-fontaine.fabrice@gmail.com> https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 Signed-off-by: Fabrice Fontaine --- package/libnl/libnl.hash | 4 ++-- package/libnl/libnl.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnl/libnl.hash b/package/libnl/libnl.hash index a0f1388528..8a1bd56780 100644 --- a/package/libnl/libnl.hash +++ b/package/libnl/libnl.hash @@ -1,4 +1,4 @@ -# From https://github.com/thom311/libnl/releases/download/libnl3_6_0/libnl-3.6.0.tar.gz.sha256sum -sha256 532155fd011e5a805bd67121b87a01c757e2bb24112ac17e69cb86013b970009 libnl-3.6.0.tar.gz +# From https://github.com/thom311/libnl/releases/download/libnl3_7_0/libnl-3.7.0.tar.gz.sha256sum +sha256 9fe43ccbeeea72c653bdcf8c93332583135cda46a79507bfd0a483bb57f65939 libnl-3.7.0.tar.gz # Locally calculated sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/libnl/libnl.mk b/package/libnl/libnl.mk index d3bd185093..6896188f4d 100644 --- a/package/libnl/libnl.mk +++ b/package/libnl/libnl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNL_VERSION = 3.6.0 +LIBNL_VERSION = 3.7.0 LIBNL_SITE = https://github.com/thom311/libnl/releases/download/libnl$(subst .,_,$(LIBNL_VERSION)) LIBNL_LICENSE = LGPL-2.1+ LIBNL_LICENSE_FILES = COPYING -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:39 +0100 Subject: [Buildroot] [git commit] package/libkcapi: support building kcapi-dgst application Message-ID: <20221030104205.8ACC88745F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4ed6d61c03bf9e1ce7830bafcfeca683e6c93592 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Just add a new Kconfig option in order to support building kcapi-dgst application. Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- package/libkcapi/Config.in | 3 +++ package/libkcapi/libkcapi.mk | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8243f6b738..8f2cf7ecc4 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -8,6 +8,9 @@ config BR2_PACKAGE_LIBKCAPI if BR2_PACKAGE_LIBKCAPI +config BR2_PACKAGE_LIBKCAPI_DGSTAPP + bool "build dgst application" + config BR2_PACKAGE_LIBKCAPI_ENCAPP bool "build enc application" diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 30d500696b..c6e58c6a9b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -17,6 +17,12 @@ LIBKCAPI_CONF_ENV = \ ac_cv_path_XMLTO="" LIBKCAPI_MAKE_OPTS = CPPFLAGS="$(TARGET_CPPFLAGS)" +ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) +LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp +else +LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_ENCAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-encapp else From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:38 +0100 Subject: [Buildroot] [git commit] package/libkcapi: bump version to 1.4.0 Message-ID: <20221030104205.7C3D98745D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=06a9dc3528847ec6c12a9b6188d4106e086eabe5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Removed patch applied upstream: https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923 Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- ...use-of-__NR_io_getevents-when-not-defined.patch | 42 ---------------------- package/libkcapi/libkcapi.hash | 4 +-- package/libkcapi/libkcapi.mk | 2 +- 3 files changed, 3 insertions(+), 45 deletions(-) diff --git a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch b/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch deleted file mode 100644 index 20aa75b741..0000000000 --- a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 455c4938f5822c017c7ff79dd2dca638b6410923 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Sun, 15 Nov 2020 18:05:48 -0800 -Subject: [PATCH] Disable use of __NR_io_getevents when not defined - -Architectures like riscv32 do not define this syscall, therefore return -ENOSYS on such architectures - -Upstream-Status: Pending -Signed-off-by: Khem Raj -Signed-off-by: Stephan Mueller -[Retrieved from: -https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923] -Signed-off-by: Fabrice Fontaine ---- - lib/internal.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/lib/internal.h b/lib/internal.h -index 1237827..f765461 100644 ---- a/lib/internal.h -+++ b/lib/internal.h -@@ -325,10 +325,17 @@ static inline int io_submit(aio_context_t ctx, long n, struct iocb **iocb) - return syscall(__NR_io_submit, ctx, n, iocb); - } - --static inline int io_getevents(aio_context_t ctx, long min, long max, -- struct io_event *events, struct timespec *timeout) -+static inline int io_getevents(__attribute__((unused)) aio_context_t ctx, -+ __attribute__((unused)) long min, -+ __attribute__((unused)) long max, -+ __attribute__((unused)) struct io_event *events, -+ __attribute__((unused)) struct timespec *timeout) - { -+#ifdef __NR_io_getevents - return syscall(__NR_io_getevents, ctx, min, max, events, timeout); -+#else -+ return -ENOSYS; -+#endif - } - - /************************************************************ diff --git a/package/libkcapi/libkcapi.hash b/package/libkcapi/libkcapi.hash index 49b0880211..d858086408 100644 --- a/package/libkcapi/libkcapi.hash +++ b/package/libkcapi/libkcapi.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 8a08dcbb4d05ede4357cdc9d61c7f2a7f2cd96b7ce2eb41b28e45b2e378267ad libkcapi-1.1.5.tar.xz -sha256 c6b8402a68999b0f84560ab43cdf60f9ff33c4a9a8ced6a40db9d3b787ba5b4a COPYING +sha256 644b47593b3f27f08add7a8808ccdbe569a2f331d70fb8b52551e57379b917fa libkcapi-1.4.0.tar.xz +sha256 9765fad61726afb2b253db2c68153672e4178d6809667ae98141f3e90fe8645b COPYING sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING.gplv2 sha256 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239 COPYING.bsd diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 09c5c028bc..30d500696b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBKCAPI_VERSION = 1.1.5 +LIBKCAPI_VERSION = 1.4.0 LIBKCAPI_SOURCE = libkcapi-$(LIBKCAPI_VERSION).tar.xz LIBKCAPI_SITE = http://www.chronox.de/libkcapi LIBKCAPI_AUTORECONF = YES From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:39 +0100 Subject: [Buildroot] [git commit] package/libkcapi: support enabling lib-asym and lib-kpp Message-ID: <20221030104205.974C387460@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1ce9af6ccfa3136e62d0c429adb38460bece058f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add Kconfig options to allow enabling asymmetric cipher support (--enable-lib-asym) and key protocol primitives support (--enable-lib-kpp) in library. Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- package/libkcapi/Config.in | 14 ++++++++++++++ package/libkcapi/libkcapi.mk | 12 ++++++++++++ 2 files changed, 26 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8f2cf7ecc4..bf9c95270c 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -8,6 +8,13 @@ config BR2_PACKAGE_LIBKCAPI if BR2_PACKAGE_LIBKCAPI +config BR2_PACKAGE_LIBKCAPI_ASYM + bool "build asymmetric ciphers library" + help + Using this library requires the Linux kernel to be patched + with libkcapi Linux kernel patches found in libkcapi + kernel-patches/ directory. + config BR2_PACKAGE_LIBKCAPI_DGSTAPP bool "build dgst application" @@ -21,6 +28,13 @@ config BR2_PACKAGE_LIBKCAPI_HASHER comment "hasher application needs a toolchain w/ dynamic library" depends on BR2_STATIC_LIBS +config BR2_PACKAGE_LIBKCAPI_KPP + bool "build KPP library" + help + Using this library requires the Linux kernel to be patched + with libkcapi Linux kernel patches found in libkcapi + kernel-patches/ directory. + config BR2_PACKAGE_LIBKCAPI_RNGAPP bool "build rng read application" diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index c6e58c6a9b..e88928a74d 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -17,6 +17,12 @@ LIBKCAPI_CONF_ENV = \ ac_cv_path_XMLTO="" LIBKCAPI_MAKE_OPTS = CPPFLAGS="$(TARGET_CPPFLAGS)" +ifeq ($(BR2_PACKAGE_LIBKCAPI_ASYM),y) +LIBKCAPI_CONF_OPTS += --enable-lib-asym +else +LIBKCAPI_CONF_OPTS += --disable-lib-asym +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp else @@ -35,6 +41,12 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-hasher endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_KPP),y) +LIBKCAPI_CONF_OPTS += --enable-lib-kpp +else +LIBKCAPI_CONF_OPTS += --disable-lib-kpp +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_RNGAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-rngapp else From thomas.petazzoni at bootlin.com Sun Oct 30 10:45:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:45:29 +0100 Subject: [Buildroot] [0/3] package/libkcapi: bump version to 1.4.0 and add Kconfigs In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221030114529.607f4e73@windsurf> Hello Tan, On Sat, 15 Oct 2022 16:47:54 +0800 Tan En De wrote: > Tan En De (3): > package/libkcapi: bump version to 1.4.0 > package/libkcapi: support building kcapi-dgst application > package/libkcapi: support enabling lib-asym and lib-kpp Thanks a lot, all 3 patches applied. I did some minor changes on PATCH 2/3 and 3/3: - Alphabetic ordering in Config.in and libkcapi.mk - Improvement of the prompt of the options, moving the discussion about kernel patches into the help text of each option instead of inside the prompt (which would otherwise be too long) Also, I see we have nobody in our DEVELOPERS associated to the libkcapi package. If you're a user of this package, would you agree to be listed in the DEVELOPERS file for this package? This way, you would receive notifications when we have build failures affecting this package, and you could help us maintain its support in Buildroot moving forward. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 10:51:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:51:38 +0100 Subject: [Buildroot] [git commit] package/f2fs-tools: fix build with lz4 1.9.4 Message-ID: <20221030105150.CFF6B8745B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c999e540dd233f8cb52eee4c35373cd6603aea97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure raised since bump of lz4 to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compress.c: In function 'lz4_compress_init': compress.c:36:42: error: 'LZ4_STREAMSIZE_U64' undeclared (first use in this function); did you mean 'LZ4_STREAMSIZE'? 36 | #define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) | ^~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ca8b6646322a4cb911fad5fb9cb38046743609bf Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...2-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch new file mode 100644 index 0000000000..b43def6bb7 --- /dev/null +++ b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch @@ -0,0 +1,34 @@ +From 19f77c6f6277a274434d6d8883f50e7955c6a8db Mon Sep 17 00:00:00 2001 +From: Jaegeuk Kim +Date: Mon, 29 Aug 2022 11:03:35 -0700 +Subject: f2fs-tools: fix build error on lz4-1.9.4 + +LZ4_STREAMSIZE_U64 is undefined in new lz4 lib. + +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=19f77c6f6277a274434d6d8883f50e7955c6a8db] +Signed-off-by: Fabrice Fontaine +--- + fsck/compress.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/fsck/compress.c b/fsck/compress.c +index b413492..b15f0a4 100644 +--- a/fsck/compress.c ++++ b/fsck/compress.c +@@ -32,10 +32,7 @@ + #ifdef HAVE_LIBLZ4 + #define LZ4_MEMORY_USAGE 14 + #define LZ4_MAX_INPUT_SIZE 0x7E000000 /* 2 113 929 216 bytes */ +-#ifndef LZ4_STREAMSIZE +-#define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) +-#endif +-#define LZ4_MEM_COMPRESS LZ4_STREAMSIZE ++#define LZ4_MEM_COMPRESS sizeof(LZ4_stream_t) + #define LZ4_ACCELERATION_DEFAULT 1 + #define LZ4_WORK_SIZE ALIGN_UP(LZ4_MEM_COMPRESS, 8) + #endif +-- +cgit + From thomas.petazzoni at bootlin.com Sun Oct 30 10:51:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:51:34 +0100 Subject: [Buildroot] [git commit] package/f2fs-tools: add lz4 and lzo optional dependencies Message-ID: <20221030105150.C65DA8746C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=952fa08764acc8d78985d2cc91d37112324b67cb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master lz4 and lzo are optional dependencies (enabled by default) since bump to version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-configure-ac-fix-cross-compilation.patch | 88 ++++++++++++++++++++++ package/f2fs-tools/f2fs-tools.mk | 18 ++++- 2 files changed, 105 insertions(+), 1 deletion(-) diff --git a/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch new file mode 100644 index 0000000000..0e3d4da191 --- /dev/null +++ b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch @@ -0,0 +1,88 @@ +From 32e7d272344024c216f155c3463dd2d548f3fafd Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 4 Jul 2022 11:29:19 +0200 +Subject: configure.ac: fix cross compilation + +AC_CHECK_LIB seems to not work correctly with OpenWrt. Add possibility +to disable lz4 and lzo2 manually. + +Fixes errors in the form of: + Package f2fsck is missing dependencies for the following libraries: + liblz4.so.1 + liblzo2.so.2 + +Signed-off-by: Nick Hainke +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=32e7d272344024c216f155c3463dd2d548f3fafd] +Signed-off-by: Fabrice Fontaine +--- + configure.ac | 44 ++++++++++++++++++++++++++++++++++---------- + 1 file changed, 34 insertions(+), 10 deletions(-) + +diff --git a/configure.ac b/configure.ac +index ea39461..dbe9ad3 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -50,6 +50,18 @@ AC_ARG_WITH([blkid], + [], + [with_blkid=check]) + ++AC_ARG_WITH([lzo2], ++ [AS_HELP_STRING([--without-lzo2], ++ [Ignore presence of liblzo2 and disable lzo2 support])], ++ [], ++ [with_lzo2=check]) ++ ++AC_ARG_WITH([lz4], ++ [AS_HELP_STRING([--without-lz4], ++ [Ignore presence of liblz4 and disable lz4 support])], ++ [], ++ [with_lz4=check]) ++ + # Checks for programs. + AC_PROG_CC + AM_PROG_AR +@@ -71,17 +83,29 @@ AS_IF([test "x$with_blkid" != xno], + fi + ], -lblkid)]) + +-AC_CHECK_LIB([lzo2], [main], +- [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) +- AC_DEFINE([HAVE_LIBLZO2], [1], +- [Define if you have liblzo2]) +- ], [], []) ++AS_IF([test "x$with_lzo2" != xno], ++ [AC_CHECK_LIB([lzo2], [main], ++ [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) ++ AC_DEFINE([HAVE_LIBLZO2], [1], ++ [Define if you have liblzo2]) ++ ], ++ [if test "x$with_lzo2" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lzo2 was given, but test for lzo2 failed]) ++ fi ++ ], -llzo2)]) + +-AC_CHECK_LIB([lz4], [main], +- [AC_SUBST([liblz4_LIBS], ["-llz4"]) +- AC_DEFINE([HAVE_LIBLZ4], [1], +- [Define if you have liblz4]) +- ], [], []) ++AS_IF([test "x$with_lz4" != xno], ++ [AC_CHECK_LIB([lz4], [main], ++ [AC_SUBST([liblz4_LIBS], ["-llz4"]) ++ AC_DEFINE([HAVE_LIBLZ4], [1], ++ [Define if you have liblz4]) ++ ], ++ [if test "x$with_lz4" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lz4 was given, but test for lz4 failed]) ++ fi ++ ], -llz4)]) + + AS_IF([test "x$with_selinux" != xno], + [AC_CHECK_LIB([selinux], [getcon], +-- +cgit + diff --git a/package/f2fs-tools/f2fs-tools.mk b/package/f2fs-tools/f2fs-tools.mk index 2c4ee9185b..60f1004d77 100644 --- a/package/f2fs-tools/f2fs-tools.mk +++ b/package/f2fs-tools/f2fs-tools.mk @@ -22,6 +22,20 @@ else F2FS_TOOLS_CONF_OPTS += --without-selinux endif +ifeq ($(BR2_PACKAGE_LZ4),y) +F2FS_TOOLS_CONF_OPTS += --with-lz4 +F2FS_TOOLS_DEPENDENCIES += lz4 +else +F2FS_TOOLS_CONF_OPTS += --without-lz4 +endif + +ifeq ($(BR2_PACKAGE_LZO),y) +F2FS_TOOLS_CONF_OPTS += --with-lzo2 +F2FS_TOOLS_DEPENDENCIES += lzo +else +F2FS_TOOLS_CONF_OPTS += --without-lzo2 +endif + ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) # util-linux is a dependency already, no need to list it again F2FS_TOOLS_CONF_OPTS += --with-blkid @@ -34,7 +48,9 @@ endif # blkid support even if we have host-util-linux HOST_F2FS_TOOLS_CONF_OPTS = \ --without-selinux \ - --without-blkid + --without-blkid \ + --without-lz4 \ + --without-lzo2 $(eval $(autotools-package)) $(eval $(host-autotools-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 10:52:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:52:05 +0100 Subject: [Buildroot] [PATCH 1/2] package/f2fs-tools: add lz4 and lzo optional dependencies In-Reply-To: <20221029170023.219493-1-fontaine.fabrice@gmail.com> References: <20221029170023.219493-1-fontaine.fabrice@gmail.com> Message-ID: <20221030115205.0fab7010@windsurf> On Sat, 29 Oct 2022 19:00:22 +0200 Fabrice Fontaine wrote: > lz4 and lzo are optional dependencies (enabled by default) since bump to > version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and > https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc > > Signed-off-by: Fabrice Fontaine > --- > ...1-configure-ac-fix-cross-compilation.patch | 88 +++++++++++++++++++ > package/f2fs-tools/f2fs-tools.mk | 18 +++- > 2 files changed, 105 insertions(+), 1 deletion(-) > create mode 100644 package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch Both applied to master. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:44 +0100 Subject: [Buildroot] [git commit] package/hackrf: bump to version 2022.09.1 Message-ID: <20221030110442.D00F58746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f020e03ad9910f9e3419666aa5c7d58ab205fa9d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update site - Drop patch (already in version) https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...es-FindFFTW.cmake-fix-build-without-fftw3.patch | 34 ---------------------- package/hackrf/Config.in | 2 +- package/hackrf/hackrf.hash | 2 +- package/hackrf/hackrf.mk | 4 +-- 4 files changed, 4 insertions(+), 38 deletions(-) diff --git a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch b/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch deleted file mode 100644 index 2b1f34879b..0000000000 --- a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 3e32f46c7948f6b26476558905995ebec9b01760 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 15 Oct 2021 23:36:54 +0200 -Subject: [PATCH] cmake/modules/FindFFTW.cmake: fix build without fftw3 - -Build on Linux fails if libfftw3 is not available since commit -https://github.com/greatscottgadgets/hackrf/commit/a8c1fc92e9fa10843cb4aafd68c52f9903ebd05d -which replaced -pkg_check_modules(FFTW REQUIRED fftw3f) -by -find_package(FFTW REQUIRED) - -Fix this build failure by updating FindFFTW.cmake to check for fftw3f - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/greatscottgadgets/hackrf/commit/3e32f46c7948f6b26476558905995ebec9b01760] ---- - host/cmake/modules/FindFFTW.cmake | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/host/cmake/modules/FindFFTW.cmake b/host/cmake/modules/FindFFTW.cmake -index b9f3bfb81..802db4f5b 100644 ---- a/host/cmake/modules/FindFFTW.cmake -+++ b/host/cmake/modules/FindFFTW.cmake -@@ -16,7 +16,7 @@ IF (WIN32) - include_directories(${FFTW_INCLUDES}) - find_library (FFTW_LIBRARIES NAMES ${FFTW_LIBRARIES}) - ELSE(WIN32) --find_library (FFTW_LIBRARIES NAMES fftw3) -+find_library (FFTW_LIBRARIES NAMES fftw3f) - ENDIF(WIN32) - - diff --git a/package/hackrf/Config.in b/package/hackrf/Config.in index 05d01adc96..d5df328dfa 100644 --- a/package/hackrf/Config.in +++ b/package/hackrf/Config.in @@ -9,7 +9,7 @@ config BR2_PACKAGE_HACKRF help Library and tools for accessing HackRF SDR boards. - https://github.com/mossmann/hackrf/tree/master/host + https://hackrf.readthedocs.io comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ diff --git a/package/hackrf/hackrf.hash b/package/hackrf/hackrf.hash index 9053858f76..16ccb9dcfb 100644 --- a/package/hackrf/hackrf.hash +++ b/package/hackrf/hackrf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a43e5080c11efdfe69ddebcc35a02b018e30e820de0e0ebdc7948cf7b0cd93a3 hackrf-2021.03.1.tar.xz +sha256 bacd4e7937467ffa14654624444c8b5c716ab470d8c1ee8d220d2094ae2adb3e hackrf-2022.09.1.tar.xz sha256 49b60a6288f90f49074228cc1fae0fb16871ba36b756013abdf7c2fc92f01fad COPYING diff --git a/package/hackrf/hackrf.mk b/package/hackrf/hackrf.mk index c224afc332..4317da60bc 100644 --- a/package/hackrf/hackrf.mk +++ b/package/hackrf/hackrf.mk @@ -4,8 +4,8 @@ # ################################################################################ -HACKRF_VERSION = 2021.03.1 -HACKRF_SITE = https://github.com/mossmann/hackrf/releases/download/v$(HACKRF_VERSION) +HACKRF_VERSION = 2022.09.1 +HACKRF_SITE = https://github.com/greatscottgadgets/hackrf/releases/download/v$(HACKRF_VERSION) HACKRF_SOURCE = hackrf-$(HACKRF_VERSION).tar.xz HACKRF_LICENSE = GPL-2.0+, BSD-3-Clause HACKRF_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:45 +0100 Subject: [Buildroot] [git commit] package/python-maturin: bump to version 0.13.7 Message-ID: <20221030110442.DEE508746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17f2af56cc03d12023ed9e435a133c52bd495f1f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..eadf300bc2 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 06d9d166b4a2d86f06ed09eeb362ac03728e1fbd2b852cc6a4ddc7cc75029237 maturin-0.13.7.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..ffbd131ef0 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.7 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/4f/19/6f982e341612ab442f90ba1a047a4188d48473ad0d1dbfb3dffdaa20e095 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:47 +0100 Subject: [Buildroot] [git commit] package/pps-tools: bump to version 1.0.3 Message-ID: <20221030110442.EBED687470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32602849a8352647c46cc5330668339000205bdf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/ago/pps-tools is redirecting to https://github.com/redlab-i/pps-tools https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/pps-tools/Config.in | 2 +- package/pps-tools/pps-tools.hash | 2 +- package/pps-tools/pps-tools.mk | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/pps-tools/Config.in b/package/pps-tools/Config.in index 0c4bb112a9..16caef3e0e 100644 --- a/package/pps-tools/Config.in +++ b/package/pps-tools/Config.in @@ -4,4 +4,4 @@ config BR2_PACKAGE_PPS_TOOLS Pulse per second tools. Provides timepps.h and other PPS utilities. - https://github.com/ago/pps-tools/ + https://github.com/redlab-i/pps-tools/ diff --git a/package/pps-tools/pps-tools.hash b/package/pps-tools/pps-tools.hash index ee3e4e3d79..b8cc2f64d5 100644 --- a/package/pps-tools/pps-tools.hash +++ b/package/pps-tools/pps-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1168f1474235017af413afdb07288303ad7a7b12a0282f3bf9ed0e22fe0d7d2e pps-tools-e2b25049df9a4da28168b7378016f1650d0dfa6b.tar.gz +sha256 89163e29f1a4a0a702bbe25b900fd37d2eb86442329cefee58847e57e1964d7a pps-tools-1.0.3.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pps-tools/pps-tools.mk b/package/pps-tools/pps-tools.mk index 2d82cf7dad..0aa22acf4e 100644 --- a/package/pps-tools/pps-tools.mk +++ b/package/pps-tools/pps-tools.mk @@ -4,8 +4,8 @@ # ################################################################################ -PPS_TOOLS_VERSION = e2b25049df9a4da28168b7378016f1650d0dfa6b -PPS_TOOLS_SITE = $(call github,ago,pps-tools,$(PPS_TOOLS_VERSION)) +PPS_TOOLS_VERSION = 1.0.3 +PPS_TOOLS_SITE = $(call github,redlab-i,pps-tools,v$(PPS_TOOLS_VERSION)) PPS_TOOLS_INSTALL_STAGING = YES PPS_TOOLS_LICENSE = GPL-2.0+ PPS_TOOLS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:48 +0100 Subject: [Buildroot] [git commit] package/python-wsaccel: bump to version 0.6.4 Message-ID: <20221030110443.05FC387471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8a5178293fa9dcfab1e2599de6dd7d6b163c7007 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-wsaccel/python-wsaccel.hash | 4 ++-- package/python-wsaccel/python-wsaccel.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-wsaccel/python-wsaccel.hash b/package/python-wsaccel/python-wsaccel.hash index 9d0002d41d..b388c3cc7c 100644 --- a/package/python-wsaccel/python-wsaccel.hash +++ b/package/python-wsaccel/python-wsaccel.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/wsaccel/json -md5 973168711818dd98b8b28a4c2db77a27 wsaccel-0.6.3.tar.gz -sha256 fdb27866bb6b6e7a29e45222778ff97938782a0ce92eff07dfb20af8fb9301c4 wsaccel-0.6.3.tar.gz +md5 73bdc70035813ded14f9a4b81e82622a wsaccel-0.6.4.tar.gz +sha256 cbf66a88bcaf6c6ad16d50ea29215891526b6e993c4bc7ed44b044ee6fe3ad3d wsaccel-0.6.4.tar.gz # Locally computed sha256 checksums sha256 b6982974cb838b985b54b663d1780d280735086249c2e28015f25dd455df25da LICENSE diff --git a/package/python-wsaccel/python-wsaccel.mk b/package/python-wsaccel/python-wsaccel.mk index 7c78951f2f..ce41d431ff 100644 --- a/package/python-wsaccel/python-wsaccel.mk +++ b/package/python-wsaccel/python-wsaccel.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WSACCEL_VERSION = 0.6.3 +PYTHON_WSACCEL_VERSION = 0.6.4 PYTHON_WSACCEL_SOURCE = wsaccel-$(PYTHON_WSACCEL_VERSION).tar.gz -PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/f5/d1/3e99875a764d0d6ec94a74977ed72dd3022a7f31d036622da9cff8fc072f +PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/77/0b/a44df15382a76b6768184630d483b8363d65b9f70d1aacf76153d496bbb9 PYTHON_WSACCEL_LICENSE = Apache-2.0 PYTHON_WSACCEL_LICENSE_FILES = LICENSE PYTHON_WSACCEL_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:50 +0100 Subject: [Buildroot] [git commit] package/sedutil: bump to version 1.20.0 Message-ID: <20221030110443.13A4D8746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9cee6283459169a08cb72b96362de8bd4d1bb69f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/sedutil/sedutil.hash | 2 +- package/sedutil/sedutil.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sedutil/sedutil.hash b/package/sedutil/sedutil.hash index 26643ef684..2ceb5db659 100644 --- a/package/sedutil/sedutil.hash +++ b/package/sedutil/sedutil.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9259466b4f73af276153c5245834a56f48f8721ea7263611b5d5e8326bc43d9e sedutil-1.15.1.tar.gz +sha256 88016b93cbbef98fa6f5c4e6f58e6c871662b6a7f1fc8dc788c8599fa37a44f3 sedutil-1.20.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 Common/LICENSE.txt diff --git a/package/sedutil/sedutil.mk b/package/sedutil/sedutil.mk index c80e43448d..566ed4fae8 100644 --- a/package/sedutil/sedutil.mk +++ b/package/sedutil/sedutil.mk @@ -4,7 +4,7 @@ # ################################################################################ -SEDUTIL_VERSION = 1.15.1 +SEDUTIL_VERSION = 1.20.0 SEDUTIL_SITE = $(call github,Drive-Trust-Alliance,sedutil,$(SEDUTIL_VERSION)) SEDUTIL_LICENSE = GPL-3.0+ SEDUTIL_LICENSE_FILES = Common/LICENSE.txt From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:56 +0100 Subject: [Buildroot] [git commit] package/minizip-zlib: bump to version 1.2.13 Message-ID: <20221030110443.4A3B58746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8ac75a9a21743888fc56421f47fae82d22351c12 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use license file available since https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/blob/v1.2.13/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minizip-zlib/minizip-zlib.hash | 4 ++-- package/minizip-zlib/minizip-zlib.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/minizip-zlib/minizip-zlib.hash b/package/minizip-zlib/minizip-zlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/minizip-zlib/minizip-zlib.hash +++ b/package/minizip-zlib/minizip-zlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/minizip-zlib/minizip-zlib.mk b/package/minizip-zlib/minizip-zlib.mk index ec0c3da7d6..4367a2420f 100644 --- a/package/minizip-zlib/minizip-zlib.mk +++ b/package/minizip-zlib/minizip-zlib.mk @@ -4,11 +4,11 @@ # ################################################################################ -MINIZIP_ZLIB_VERSION = 1.2.12 +MINIZIP_ZLIB_VERSION = 1.2.13 MINIZIP_ZLIB_SOURCE = zlib-$(MINIZIP_ZLIB_VERSION).tar.xz MINIZIP_ZLIB_SITE = http://www.zlib.net MINIZIP_ZLIB_LICENSE = Zlib -MINIZIP_ZLIB_LICENSE_FILES = README +MINIZIP_ZLIB_LICENSE_FILES = LICENSE MINIZIP_ZLIB_INSTALL_STAGING = YES MINIZIP_ZLIB_SUBDIR = contrib/minizip # configure is not shipped in contrib/minizip From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:52 +0100 Subject: [Buildroot] [git commit] package/gawk: bump to version 5.2.0 Message-ID: <20221030110443.20A878746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd474c43e3d8bc95ed86baf0408d716b5171eec5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/gawk/gawk.hash | 4 ++-- package/gawk/gawk.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gawk/gawk.hash b/package/gawk/gawk.hash index 894c939c5b..3ab0cfdbb3 100644 --- a/package/gawk/gawk.hash +++ b/package/gawk/gawk.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://ftp.gnu.org/gnu/gawk/gawk-5.1.1.tar.xz.sig +# https://ftp.gnu.org/gnu/gawk/gawk-5.2.0.tar.xz.sig # Primary key fingerprint: D196 7C63 7887 1317 7D86 1ED7 DF59 7815 937E C0D2 -sha256 d87629386e894bbea11a5e00515fc909dc9b7249529dad9e6a3a2c77085f7ea2 gawk-5.1.1.tar.xz +sha256 e4ddbad1c2ef10e8e815ca80208d0162d4c983e6cca16f925e8418632d639018 gawk-5.2.0.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gawk/gawk.mk b/package/gawk/gawk.mk index 3a1cec4969..47f681339d 100644 --- a/package/gawk/gawk.mk +++ b/package/gawk/gawk.mk @@ -4,7 +4,7 @@ # ################################################################################ -GAWK_VERSION = 5.1.1 +GAWK_VERSION = 5.2.0 GAWK_SOURCE = gawk-$(GAWK_VERSION).tar.xz GAWK_SITE = $(BR2_GNU_MIRROR)/gawk GAWK_DEPENDENCIES = host-gawk From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:53 +0100 Subject: [Buildroot] [git commit] package/minizip: bump to version 3.0.7 Message-ID: <20221030110443.2E5B987470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a92f29dae72fca79a3585abe93c2482528bbfe83 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minizip/minizip.hash | 2 +- package/minizip/minizip.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/minizip/minizip.hash b/package/minizip/minizip.hash index 0c6e218488..55fc176dbd 100644 --- a/package/minizip/minizip.hash +++ b/package/minizip/minizip.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 383fa1bdc28c482828a8a8db53f758dbd44291b641182724fda5df5b59cce543 minizip-3.0.6.tar.gz +sha256 39981a0db1bb6da504909bce63d7493286c5e50825c056564544c990d15c55cf minizip-3.0.7.tar.gz sha256 675181c03fc1302a1c8554c00f7be9bb420c5dbc9dcc2013433cec144413de03 LICENSE diff --git a/package/minizip/minizip.mk b/package/minizip/minizip.mk index 5adee7c494..c74c0df8d1 100644 --- a/package/minizip/minizip.mk +++ b/package/minizip/minizip.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINIZIP_VERSION = 3.0.6 +MINIZIP_VERSION = 3.0.7 MINIZIP_SITE = $(call github,zlib-ng,minizip-ng,$(MINIZIP_VERSION)) MINIZIP_DEPENDENCIES = host-pkgconf MINIZIP_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:08 +0100 Subject: [Buildroot] [git commit] package/libpagekite: bump to version 0.91.201110 Message-ID: <20221030110443.A30A487471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=20348d48592e49542d7f97f31697271ca5873ba7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpagekite/libpagekite.hash | 2 +- package/libpagekite/libpagekite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libpagekite/libpagekite.hash b/package/libpagekite/libpagekite.hash index 8716b991ca..2c2e5c9b59 100644 --- a/package/libpagekite/libpagekite.hash +++ b/package/libpagekite/libpagekite.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c812815aae6f100212b7d6f662370a0634151fabb59f028126a59c4083a6d26d libpagekite-0.91.190530.tar.gz +sha256 db835d49becebc00d462f2f47aefc1f1d3a4e0e096487cb3b4248134185df715 libpagekite-0.91.201110.tar.gz # License files, locally calculated sha256 ba443b9c9d4273d06aae3e147e9ad1ec199cc9c23455f486a039536d47f57eed doc/COPYING.md diff --git a/package/libpagekite/libpagekite.mk b/package/libpagekite/libpagekite.mk index 60b62f5cfd..bb235ba1f3 100644 --- a/package/libpagekite/libpagekite.mk +++ b/package/libpagekite/libpagekite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPAGEKITE_VERSION = 0.91.190530 +LIBPAGEKITE_VERSION = 0.91.201110 LIBPAGEKITE_SITE = $(call github,pagekite,libpagekite,v$(LIBPAGEKITE_VERSION)) # pkrelay is AGPL-3.0+ but is not built From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:59 +0100 Subject: [Buildroot] [git commit] package/makedumpfile: bump to version 1.7.2 Message-ID: <20221030110443.6221487470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=29c0b4e6db89131005d055903ffb2bc613bb4c2e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official tarball https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/makedumpfile/makedumpfile.hash | 2 +- package/makedumpfile/makedumpfile.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/makedumpfile/makedumpfile.hash b/package/makedumpfile/makedumpfile.hash index 5eeb6387fa..f38d93c04a 100644 --- a/package/makedumpfile/makedumpfile.hash +++ b/package/makedumpfile/makedumpfile.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8985f8df249087ea68c6051dec6dac3ef0703fe2aa87d0266f3951f93aa8da5e makedumpfile-1.7.0.tar.gz +sha256 748583ea4c0b32346008aa53b313e9708f60a8481959c25c76e5c94740032d9b makedumpfile-1.7.2.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/makedumpfile/makedumpfile.mk b/package/makedumpfile/makedumpfile.mk index 868c681344..8dc60b043e 100644 --- a/package/makedumpfile/makedumpfile.mk +++ b/package/makedumpfile/makedumpfile.mk @@ -4,8 +4,8 @@ # ################################################################################ -MAKEDUMPFILE_VERSION = 1.7.0 -MAKEDUMPFILE_SITE = $(call github,makedumpfile,makedumpfile,$(MAKEDUMPFILE_VERSION)) +MAKEDUMPFILE_VERSION = 1.7.2 +MAKEDUMPFILE_SITE = https://github.com/makedumpfile/makedumpfile/releases/download/$(MAKEDUMPFILE_VERSION) MAKEDUMPFILE_DEPENDENCIES = bzip2 elfutils xz zlib MAKEDUMPFILE_LICENSE = GPL-2.0 MAKEDUMPFILE_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:55 +0100 Subject: [Buildroot] [git commit] package/minissdpd: bump to version 1.6.0 Message-ID: <20221030110443.3C8C087471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3be3113b570715121d5b8f9ea689cf42ed512d66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE file (license refined for github: https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minissdpd/minissdpd.hash | 4 ++-- package/minissdpd/minissdpd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/minissdpd/minissdpd.hash b/package/minissdpd/minissdpd.hash index e14fe7ab2c..bc1db5f283 100644 --- a/package/minissdpd/minissdpd.hash +++ b/package/minissdpd/minissdpd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 a073be9c6d9194feaeccf31cd986c48afd2212426b6594e75166cedff1c461aa minissdpd-1.5.20211105.tar.gz -sha256 45950e1d443106906f83a4ec7b9c2e1a9d6457130737a493cff0e5b7a39da570 LICENSE +sha256 f4c2dea6a472e0a5cc9dca2dc4c1fc36ba5538eacf8d793825293251725546bd minissdpd-1.6.0.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/minissdpd/minissdpd.mk b/package/minissdpd/minissdpd.mk index 2b9fac4df1..4f594cb5a0 100644 --- a/package/minissdpd/minissdpd.mk +++ b/package/minissdpd/minissdpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINISSDPD_VERSION = 1.5.20211105 +MINISSDPD_VERSION = 1.6.0 MINISSDPD_SITE = http://miniupnp.free.fr/files MINISSDPD_LICENSE = BSD-3-Clause MINISSDPD_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:05 +0100 Subject: [Buildroot] [git commit] package/python-pypa-build: bump to version 0.9.0 Message-ID: <20221030110443.904B087470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d86c46b83bcbebc40e40718796ef9033667c9d27 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-pypa-build/python-pypa-build.hash | 4 ++-- package/python-pypa-build/python-pypa-build.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pypa-build/python-pypa-build.hash b/package/python-pypa-build/python-pypa-build.hash index c0856c2abf..4c02ee1dce 100644 --- a/package/python-pypa-build/python-pypa-build.hash +++ b/package/python-pypa-build/python-pypa-build.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/build/json -md5 307632355e32c3769c99da66f92fe020 build-0.8.0.tar.gz -sha256 887a6d471c901b1a6e6574ebaeeebb45e5269a79d095fe9a8f88d6614ed2e5f0 build-0.8.0.tar.gz +md5 f2dc1823b0eff7037e19be18e354b2f1 build-0.9.0.tar.gz +sha256 1a07724e891cbd898923145eb7752ee7653674c511378eb9c7691aab1612bc3c build-0.9.0.tar.gz # Locally computed sha256 checksums sha256 aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f LICENSE diff --git a/package/python-pypa-build/python-pypa-build.mk b/package/python-pypa-build/python-pypa-build.mk index de4894dc3a..b78aefe855 100644 --- a/package/python-pypa-build/python-pypa-build.mk +++ b/package/python-pypa-build/python-pypa-build.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYPA_BUILD_VERSION = 0.8.0 +PYTHON_PYPA_BUILD_VERSION = 0.9.0 PYTHON_PYPA_BUILD_SOURCE = build-$(PYTHON_PYPA_BUILD_VERSION).tar.gz -PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/52/fa/931038182be739955cf83179d9b9a6ce9832bc5f9a917a006f765cb53a1f +PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/0f/61/aaf43fbb36cc4308be8ac8088f52db9622b0dbf1f0880c1016ae6aa03f46 PYTHON_PYPA_BUILD_LICENSE = MIT PYTHON_PYPA_BUILD_LICENSE_FILES = LICENSE PYTHON_PYPA_BUILD_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:58 +0100 Subject: [Buildroot] [git commit] package/libidn2: bump to version 2.3.4 Message-ID: <20221030110443.56EE78746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c321a08ad468ef4154ae772e65ce500e00020529 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libidn2/libidn2.hash | 2 +- package/libidn2/libidn2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libidn2/libidn2.hash b/package/libidn2/libidn2.hash index 919c9b18a5..1051231bde 100644 --- a/package/libidn2/libidn2.hash +++ b/package/libidn2/libidn2.hash @@ -1,5 +1,5 @@ # Calculated locally after checking signature -sha256 f3ac987522c00d33d44b323cae424e2cffcb4c63c6aa6cd1376edacbf1c36eb0 libidn2-2.3.3.tar.gz +sha256 93caba72b4e051d1f8d4f5a076ab63c99b77faee019b72b9783b267986dbb45f libidn2-2.3.4.tar.gz # Hash for license files: sha256 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76 COPYING diff --git a/package/libidn2/libidn2.mk b/package/libidn2/libidn2.mk index 1652227291..9d72998149 100644 --- a/package/libidn2/libidn2.mk +++ b/package/libidn2/libidn2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBIDN2_VERSION = 2.3.3 +LIBIDN2_VERSION = 2.3.4 LIBIDN2_SITE = $(BR2_GNU_MIRROR)/libidn LIBIDN2_LICENSE = GPL-2.0+ or LGPL-3.0+ (library) LIBIDN2_LICENSE_FILES = COPYING COPYINGv2 COPYING.LESSERv3 COPYING.unicode From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:01 +0100 Subject: [Buildroot] [git commit] package/lldpd: security bump to version 1.0.15 Message-ID: <20221030110443.6EE1E87472@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=62e082ec4d58e117697324938b9833c057116710 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix heap overflow when reading SONMP. CVE-2021-43612. - https://vincentbernat.github.io/lldpd/ is redirecting to https://lldpd.github.io/ https://github.com/lldpd/lldpd/blob/1.0.15/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lldpd/Config.in | 2 +- package/lldpd/lldpd.hash | 4 ++-- package/lldpd/lldpd.mk | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lldpd/Config.in b/package/lldpd/Config.in index 9a9517b5b0..3e0446986f 100644 --- a/package/lldpd/Config.in +++ b/package/lldpd/Config.in @@ -18,7 +18,7 @@ config BR2_PACKAGE_LLDPD lldpd is an ISC-licensed implementation of LLDP for various Unixes. It also supports some proprietary protocols. - https://vincentbernat.github.io/lldpd/ + https://lldpd.github.io/ if BR2_PACKAGE_LLDPD diff --git a/package/lldpd/lldpd.hash b/package/lldpd/lldpd.hash index 6e809b2796..6db5ca98f1 100644 --- a/package/lldpd/lldpd.hash +++ b/package/lldpd/lldpd.hash @@ -1,5 +1,5 @@ # Locally computed after checking gpg key -# https://media.luffy.cx/files/lldpd/lldpd-1.0.9.tar.gz.gpg +# https://media.luffy.cx/files/lldpd/lldpd-1.0.15.tar.gz.gpg # using key AEF2348766F371C689A7360095A42FE8353525F9 -sha256 6b64eb3125952b1e33472198b054e8aa0dee45f45d3d4be22789090a474949f5 lldpd-1.0.9.tar.gz +sha256 f7fe3a130be98a19c491479ef60f36b8ee41a9e6bc4d7f2c41033f63956a3126 lldpd-1.0.15.tar.gz sha256 0e96a5aea65f16e2239231ce4ab90497f8bc3bb8fe6abe9299aade4726ff7c8d LICENSE diff --git a/package/lldpd/lldpd.mk b/package/lldpd/lldpd.mk index b88dd002e4..dd6f8dcf5d 100644 --- a/package/lldpd/lldpd.mk +++ b/package/lldpd/lldpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -LLDPD_VERSION = 1.0.9 +LLDPD_VERSION = 1.0.15 LLDPD_SITE = https://media.luffy.cx/files/lldpd LLDPD_DEPENDENCIES = \ $(if $(BR2_PACKAGE_CHECK),check) \ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:12 +0100 Subject: [Buildroot] [git commit] package/libnl: bump to version 3.7.0 Message-ID: <20221030110443.C000887470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=94c6ba6c7085cece40619a2cab2d93dc54b2a412 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libnl/libnl.hash | 4 ++-- package/libnl/libnl.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnl/libnl.hash b/package/libnl/libnl.hash index a0f1388528..8a1bd56780 100644 --- a/package/libnl/libnl.hash +++ b/package/libnl/libnl.hash @@ -1,4 +1,4 @@ -# From https://github.com/thom311/libnl/releases/download/libnl3_6_0/libnl-3.6.0.tar.gz.sha256sum -sha256 532155fd011e5a805bd67121b87a01c757e2bb24112ac17e69cb86013b970009 libnl-3.6.0.tar.gz +# From https://github.com/thom311/libnl/releases/download/libnl3_7_0/libnl-3.7.0.tar.gz.sha256sum +sha256 9fe43ccbeeea72c653bdcf8c93332583135cda46a79507bfd0a483bb57f65939 libnl-3.7.0.tar.gz # Locally calculated sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/libnl/libnl.mk b/package/libnl/libnl.mk index d3bd185093..6896188f4d 100644 --- a/package/libnl/libnl.mk +++ b/package/libnl/libnl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNL_VERSION = 3.6.0 +LIBNL_VERSION = 3.7.0 LIBNL_SITE = https://github.com/thom311/libnl/releases/download/libnl$(subst .,_,$(LIBNL_VERSION)) LIBNL_LICENSE = LGPL-2.1+ LIBNL_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:10 +0100 Subject: [Buildroot] [git commit] package/liblinear: bump to version 2.45 Message-ID: <20221030110443.B69688746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=90d8ca33ef27b3b47999aa0c2c5a499afe362752 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 2.45 released on August 11, 2022. Some minor bugs are fixed. Drop first patch (not needed since https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) https://github.com/cjlin1/liblinear/compare/v244...v245 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-blas-don-t-overwrite-ar-options.patch | 36 ---------------------- ...tatic-lib.patch => 0001-build-static-lib.patch} | 0 package/liblinear/liblinear.hash | 2 +- package/liblinear/liblinear.mk | 2 +- 4 files changed, 2 insertions(+), 38 deletions(-) diff --git a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch b/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch deleted file mode 100644 index 23ed6dd227..0000000000 --- a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cae4c3b80fee0f3637d70f6d33946888c8105637 Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Sat, 13 Dec 2014 17:16:58 +0100 -Subject: [PATCH] blas: don't overwrite ar options - -ar's rcv options get lost when AR is passed on -the command line. - -Signed-off-by: Romain Naour -Signed-off-by: Fabrice Fontaine ---- - blas/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/blas/Makefile b/blas/Makefile -index 895fd24..78cec9a 100644 ---- a/blas/Makefile -+++ b/blas/Makefile -@@ -1,4 +1,4 @@ --AR = ar rcv -+AR = ar - RANLIB = ranlib - - HEADERS = blas.h blasp.h -@@ -8,7 +8,7 @@ CFLAGS = $(OPTFLAGS) - FFLAGS = $(OPTFLAGS) - - blas: $(FILES) $(HEADERS) -- $(AR) blas.a $(FILES) -+ $(AR) rcv blas.a $(FILES) - $(RANLIB) blas.a - - clean: --- -1.9.3 - diff --git a/package/liblinear/0002-build-static-lib.patch b/package/liblinear/0001-build-static-lib.patch similarity index 100% rename from package/liblinear/0002-build-static-lib.patch rename to package/liblinear/0001-build-static-lib.patch diff --git a/package/liblinear/liblinear.hash b/package/liblinear/liblinear.hash index 27aa4e3e87..6bc72909d0 100644 --- a/package/liblinear/liblinear.hash +++ b/package/liblinear/liblinear.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 45572b99d4eeffc3e8ad7b72c27370be867edf3523c396d8b278a2c873bfbb5c liblinear-2.44.tar.gz +sha256 3c64eec45c01943a656baac7aeb8ffd782fe0aea53629aa9f5fdb8eec177c92f liblinear-2.45.tar.gz sha256 d49b7898fd9ea7c29f0478e8c409ee7c0f621533d5eca7b7912e80391dc564e3 COPYRIGHT diff --git a/package/liblinear/liblinear.mk b/package/liblinear/liblinear.mk index c100ccc6c5..014f9e2de4 100644 --- a/package/liblinear/liblinear.mk +++ b/package/liblinear/liblinear.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBLINEAR_VERSION = 2.44 +LIBLINEAR_VERSION = 2.45 LIBLINEAR_SITE = http://www.csie.ntu.edu.tw/~cjlin/liblinear LIBLINEAR_LICENSE = BSD-3-Clause LIBLINEAR_LICENSE_FILES = COPYRIGHT From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:09 +0100 Subject: [Buildroot] [git commit] package/libmodbus: bump to version 3.1.8 Message-ID: <20221030110443.ACB618746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5cf6429e2b6f3e2ee292b6c7dc6c0a1c2171bb9c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch site to get latest release https://github.com/stephane/libmodbus/releases/tag/v3.1.8 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libmodbus/libmodbus.hash | 2 +- package/libmodbus/libmodbus.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libmodbus/libmodbus.hash b/package/libmodbus/libmodbus.hash index b676d261de..83b0c3a012 100644 --- a/package/libmodbus/libmodbus.hash +++ b/package/libmodbus/libmodbus.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7dfe958431d0570b271e1a5b329b76a658e89c614cf119eb5aadb725c87f8fbd libmodbus-3.1.7.tar.gz +sha256 b122f2bc29f749702a22c0a760a7ca2182d541f5fa26bf25e3431f907b606f3c libmodbus-3.1.8.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LESSER diff --git a/package/libmodbus/libmodbus.mk b/package/libmodbus/libmodbus.mk index 46eb860392..2f8c1735da 100644 --- a/package/libmodbus/libmodbus.mk +++ b/package/libmodbus/libmodbus.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBMODBUS_VERSION = 3.1.7 -LIBMODBUS_SITE = http://libmodbus.org/releases +LIBMODBUS_VERSION = 3.1.8 +LIBMODBUS_SITE = https://github.com/stephane/libmodbus/releases/download/v$(LIBMODBUS_VERSION) LIBMODBUS_LICENSE = LGPL-2.1+ LIBMODBUS_LICENSE_FILES = COPYING.LESSER LIBMODBUS_CPE_ID_VENDOR = libmodbus From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:02 +0100 Subject: [Buildroot] [git commit] package/kismet: bump to version 2022-08-R1 Message-ID: <20221030110443.7CF738746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=caf755999df22bc5580f85674d819004ff842e50 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://www.kismetwireless.net/release/kismet-2022-08-R1/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/kismet/kismet.hash | 2 +- package/kismet/kismet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kismet/kismet.hash b/package/kismet/kismet.hash index fc5f854b7e..725d24e551 100644 --- a/package/kismet/kismet.hash +++ b/package/kismet/kismet.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 aaae4747f14734a73f601af013c0eee26e13680f5e3675dfce09b7de2e68b8a8 kismet-2022-02-R1.tar.xz +sha256 2149cceac5526508653f4d02dcf7a694e3da3dc000a2372a1ee4bf9988279781 kismet-2022-08-R1.tar.xz sha256 93c7f0d7e356b0abfb6f494ff3ea37f96abc84e9a5619b25d4e43f7553a55739 LICENSE diff --git a/package/kismet/kismet.mk b/package/kismet/kismet.mk index 3992a392f8..8def78ad2a 100644 --- a/package/kismet/kismet.mk +++ b/package/kismet/kismet.mk @@ -4,7 +4,7 @@ # ################################################################################ -KISMET_VERSION = 2022-02-R1 +KISMET_VERSION = 2022-08-R1 KISMET_SOURCE = kismet-$(KISMET_VERSION).tar.xz KISMET_SITE = http://www.kismetwireless.net/code KISMET_DEPENDENCIES = \ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:03 +0100 Subject: [Buildroot] [git commit] package/libpam-radius-auth: bump to version 2.0.0 Message-ID: <20221030110443.86C688746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=860b1b958797bd16bfe7666bb308a5ea026b1b46 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch site to get latest release https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/libpam-radius-auth/libpam-radius-auth.hash b/package/libpam-radius-auth/libpam-radius-auth.hash index 0bf97c279c..63f3f1e45e 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.hash +++ b/package/libpam-radius-auth/libpam-radius-auth.hash @@ -1,5 +1,5 @@ # Locally calculated after checking PGP signature -sha256 742d79fc39824726c098e746bd3dc3484f983f5ee082c621c1e848b2c3725305 pam_radius-1.4.0.tar.gz +sha256 798dc358e7a143163e103bd38c4101645b2e93d82aa0ec63d32c0cb929d9c65c libpam-radius-auth-2.0.0.tar.gz # Hash for license file: sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 LICENSE diff --git a/package/libpam-radius-auth/libpam-radius-auth.mk b/package/libpam-radius-auth/libpam-radius-auth.mk index 184e48d3b7..9519aad750 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.mk +++ b/package/libpam-radius-auth/libpam-radius-auth.mk @@ -4,9 +4,8 @@ # ################################################################################ -LIBPAM_RADIUS_AUTH_VERSION = 1.4.0 -LIBPAM_RADIUS_AUTH_SITE = ftp://ftp.freeradius.org/pub/radius -LIBPAM_RADIUS_AUTH_SOURCE = pam_radius-$(LIBPAM_RADIUS_AUTH_VERSION).tar.gz +LIBPAM_RADIUS_AUTH_VERSION = 2.0.0 +LIBPAM_RADIUS_AUTH_SITE = $(call github,FreeRADIUS,pam_radius,release_$(subst .,_,$(LIBPAM_RADIUS_AUTH_VERSION))) LIBPAM_RADIUS_AUTH_DEPENDENCIES = linux-pam LIBPAM_RADIUS_AUTH_INSTALL_STAGING = YES LIBPAM_RADIUS_AUTH_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:06 +0100 Subject: [Buildroot] [git commit] package/jack2: bump to version 1.9.21 Message-ID: <20221030110443.99E9F8746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c0a13b667b8587816734c432c2e691d4c3ed9763 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/jackaudio/jack2/releases/tag/v1.9.21 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/jack2/jack2.hash | 2 +- package/jack2/jack2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/jack2/jack2.hash b/package/jack2/jack2.hash index 6361473cf7..c98971ca1c 100644 --- a/package/jack2/jack2.hash +++ b/package/jack2/jack2.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 915ad2900992159bdb729b9fc4ea134b962ce32b2df0b384fee40a2c5808835d jack2-1.9.20.tar.gz +sha256 8b044a40ba5393b47605a920ba30744fdf8bf77d210eca90d39c8637fe6bc65d jack2-1.9.21.tar.gz sha256 d8c320ffc0030d1b096ae4732b50d2b811cf95e9a9b7377c1127b2563e0a0388 COPYING diff --git a/package/jack2/jack2.mk b/package/jack2/jack2.mk index 9d6a3b6479..f7683304a6 100644 --- a/package/jack2/jack2.mk +++ b/package/jack2/jack2.mk @@ -4,7 +4,7 @@ # ################################################################################ -JACK2_VERSION = 1.9.20 +JACK2_VERSION = 1.9.21 JACK2_SITE = $(call github,jackaudio,jack2,v$(JACK2_VERSION)) JACK2_LICENSE = GPL-2.0+ (jack server), LGPL-2.1+ (jack library) JACK2_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 11:05:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:05:50 +0100 Subject: [Buildroot] [PATCH 1/1] package/hackrf: bump to version 2022.09.1 In-Reply-To: <20221029120937.820995-1-fontaine.fabrice@gmail.com> References: <20221029120937.820995-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120550.026290c0@windsurf> On Sat, 29 Oct 2022 14:09:37 +0200 Fabrice Fontaine wrote: > - Update site > - Drop patch (already in version) > > https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 > > Signed-off-by: Fabrice Fontaine > --- > ...ndFFTW.cmake-fix-build-without-fftw3.patch | 34 ------------------- > package/hackrf/Config.in | 2 +- > package/hackrf/hackrf.hash | 2 +- > package/hackrf/hackrf.mk | 4 +-- > 4 files changed, 4 insertions(+), 38 deletions(-) > delete mode 100644 package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.7 In-Reply-To: <20221029123903.1422864-1-james.hilliard1@gmail.com> References: <20221029123903.1422864-1-james.hilliard1@gmail.com> Message-ID: <20221030120601.0c81d9ed@windsurf> On Sat, 29 Oct 2022 06:39:03 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-maturin/python-maturin.hash | 2 +- > package/python-maturin/python-maturin.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/pps-tools: bump to version 1.0.3 In-Reply-To: <20221029171948.232254-1-fontaine.fabrice@gmail.com> References: <20221029171948.232254-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120617.1faf349a@windsurf> On Sat, 29 Oct 2022 19:19:48 +0200 Fabrice Fontaine wrote: > https://github.com/ago/pps-tools is redirecting to > https://github.com/redlab-i/pps-tools > > https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 > > Signed-off-by: Fabrice Fontaine > --- > package/pps-tools/Config.in | 2 +- > package/pps-tools/pps-tools.hash | 2 +- > package/pps-tools/pps-tools.mk | 4 ++-- > 3 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:24 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-wsaccel: bump to version 0.6.4 In-Reply-To: <20221029172215.1437796-1-james.hilliard1@gmail.com> References: <20221029172215.1437796-1-james.hilliard1@gmail.com> Message-ID: <20221030120624.35ea91b8@windsurf> On Sat, 29 Oct 2022 11:22:15 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-wsaccel/python-wsaccel.hash | 4 ++-- > package/python-wsaccel/python-wsaccel.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/sedutil: bump to version 1.20.0 In-Reply-To: <20221029172613.255025-1-fontaine.fabrice@gmail.com> References: <20221029172613.255025-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120636.06d3f86e@windsurf> On Sat, 29 Oct 2022 19:26:13 +0200 Fabrice Fontaine wrote: > https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 > > Signed-off-by: Fabrice Fontaine > --- > package/sedutil/sedutil.hash | 2 +- > package/sedutil/sedutil.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: bump to version 5.2.0 In-Reply-To: <20221029184742.17565-1-fontaine.fabrice@gmail.com> References: <20221029184742.17565-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120645.74fc2990@windsurf> On Sat, 29 Oct 2022 20:47:42 +0200 Fabrice Fontaine wrote: > https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 > > Signed-off-by: Fabrice Fontaine > --- > package/gawk/gawk.hash | 4 ++-- > package/gawk/gawk.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:52 +0100 Subject: [Buildroot] [PATCH 1/1] package/minizip: bump to version 3.0.7 In-Reply-To: <20221029194459.28157-1-fontaine.fabrice@gmail.com> References: <20221029194459.28157-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120652.09b7643c@windsurf> On Sat, 29 Oct 2022 21:44:59 +0200 Fabrice Fontaine wrote: > https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 > > Signed-off-by: Fabrice Fontaine > --- > package/minizip/minizip.hash | 2 +- > package/minizip/minizip.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/minissdpd: bump to version 1.6.0 In-Reply-To: <20221029195108.35473-1-fontaine.fabrice@gmail.com> References: <20221029195108.35473-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120701.4795e27e@windsurf> On Sat, 29 Oct 2022 21:51:08 +0200 Fabrice Fontaine wrote: > Update hash of LICENSE file (license refined for github: > https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) > > http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz > > Signed-off-by: Fabrice Fontaine > --- > package/minissdpd/minissdpd.hash | 4 ++-- > package/minissdpd/minissdpd.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/minizip-zlib: bump to version 1.2.13 In-Reply-To: <20221029195647.42758-1-fontaine.fabrice@gmail.com> References: <20221029195647.42758-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120707.35cecd6d@windsurf> On Sat, 29 Oct 2022 21:56:47 +0200 Fabrice Fontaine wrote: > Use license file available since > https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/blob/v1.2.13/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/minizip-zlib/minizip-zlib.hash | 4 ++-- > package/minizip-zlib/minizip-zlib.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:12 +0100 Subject: [Buildroot] [PATCH 1/1] package/libidn2: bump to version 2.3.4 In-Reply-To: <20221029200108.90174-1-fontaine.fabrice@gmail.com> References: <20221029200108.90174-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120712.48c6ed24@windsurf> On Sat, 29 Oct 2022 22:01:08 +0200 Fabrice Fontaine wrote: > https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libidn2/libidn2.hash | 2 +- > package/libidn2/libidn2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/lldpd: security bump to version 1.0.15 In-Reply-To: <20221029204023.162302-1-fontaine.fabrice@gmail.com> References: <20221029204023.162302-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120728.4c4de507@windsurf> On Sat, 29 Oct 2022 22:40:23 +0200 Fabrice Fontaine wrote: > - Fix heap overflow when reading SONMP. CVE-2021-43612. > - https://vincentbernat.github.io/lldpd/ is redirecting to > https://lldpd.github.io/ > > https://github.com/lldpd/lldpd/blob/1.0.15/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/lldpd/Config.in | 2 +- > package/lldpd/lldpd.hash | 4 ++-- > package/lldpd/lldpd.mk | 2 +- > 3 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/libmodbus: bump to version 3.1.8 In-Reply-To: <20221030094155.53225-1-fontaine.fabrice@gmail.com> References: <20221030094155.53225-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120758.5e5bad95@windsurf> On Sun, 30 Oct 2022 10:41:55 +0100 Fabrice Fontaine wrote: > Switch site to get latest release > > https://github.com/stephane/libmodbus/releases/tag/v3.1.8 > > Signed-off-by: Fabrice Fontaine > --- > package/libmodbus/libmodbus.hash | 2 +- > package/libmodbus/libmodbus.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/makedumpfile: bump to version 1.7.2 In-Reply-To: <20221029203039.115558-1-fontaine.fabrice@gmail.com> References: <20221029203039.115558-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120718.462bfe18@windsurf> On Sat, 29 Oct 2022 22:30:39 +0200 Fabrice Fontaine wrote: > Use official tarball > > https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 > https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 > > Signed-off-by: Fabrice Fontaine > --- > package/makedumpfile/makedumpfile.hash | 2 +- > package/makedumpfile/makedumpfile.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpagekite: bump to version 0.91.201110 In-Reply-To: <20221030092832.43581-1-fontaine.fabrice@gmail.com> References: <20221030092832.43581-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120753.3910179c@windsurf> On Sun, 30 Oct 2022 10:28:32 +0100 Fabrice Fontaine wrote: > https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 > > Signed-off-by: Fabrice Fontaine > --- > package/libpagekite/libpagekite.hash | 2 +- > package/libpagekite/libpagekite.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/jack2: bump to version 1.9.21 In-Reply-To: <20221030092749.43292-1-fontaine.fabrice@gmail.com> References: <20221030092749.43292-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120749.62624d73@windsurf> On Sun, 30 Oct 2022 10:27:49 +0100 Fabrice Fontaine wrote: > https://github.com/jackaudio/jack2/releases/tag/v1.9.21 > > Signed-off-by: Fabrice Fontaine > --- > package/jack2/jack2.hash | 2 +- > package/jack2/jack2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:43 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pypa-build: bump to version 0.9.0 In-Reply-To: <20221030031035.1635268-1-james.hilliard1@gmail.com> References: <20221030031035.1635268-1-james.hilliard1@gmail.com> Message-ID: <20221030120743.4dcde3ff@windsurf> On Sat, 29 Oct 2022 21:10:35 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-pypa-build/python-pypa-build.hash | 4 ++-- > package/python-pypa-build/python-pypa-build.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:08:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:08:12 +0100 Subject: [Buildroot] [PATCH 1/1] package/libnl: bump to version 3.7.0 In-Reply-To: <20221030100904.76419-1-fontaine.fabrice@gmail.com> References: <20221030100904.76419-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120812.0bf3ad04@windsurf> On Sun, 30 Oct 2022 11:09:04 +0100 Fabrice Fontaine wrote: > https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 > > Signed-off-by: Fabrice Fontaine > --- > package/libnl/libnl.hash | 4 ++-- > package/libnl/libnl.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:39 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpam-radius-auth: bump to version 2.0.0 In-Reply-To: <20221029212824.315760-1-fontaine.fabrice@gmail.com> References: <20221029212824.315760-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120739.61d91a89@windsurf> On Sat, 29 Oct 2022 23:28:24 +0200 Fabrice Fontaine wrote: > Switch site to get latest release > > https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog > > Signed-off-by: Fabrice Fontaine > --- > package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- > package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- > 2 files changed, 3 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:08:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:08:08 +0100 Subject: [Buildroot] [PATCH 1/1] package/liblinear: bump to version 2.45 In-Reply-To: <20221030095228.59110-1-fontaine.fabrice@gmail.com> References: <20221030095228.59110-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120808.440eb7a2@windsurf> On Sun, 30 Oct 2022 10:52:28 +0100 Fabrice Fontaine wrote: > Version 2.45 released on August 11, 2022. Some minor bugs are fixed. > > Drop first patch (not needed since > https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) > > https://github.com/cjlin1/liblinear/compare/v244...v245 > > Signed-off-by: Fabrice Fontaine > --- > ...0001-blas-don-t-overwrite-ar-options.patch | 36 ------------------- > ...-lib.patch => 0001-build-static-lib.patch} | 0 > package/liblinear/liblinear.hash | 2 +- > package/liblinear/liblinear.mk | 2 +- > 4 files changed, 2 insertions(+), 38 deletions(-) > delete mode 100644 package/liblinear/0001-blas-don-t-overwrite-ar-options.patch > rename package/liblinear/{0002-build-static-lib.patch => 0001-build-static-lib.patch} (100%) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/kismet: bump to version 2022-08-R1 In-Reply-To: <20221029210509.265825-1-fontaine.fabrice@gmail.com> References: <20221029210509.265825-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120736.0d439a79@windsurf> On Sat, 29 Oct 2022 23:05:09 +0200 Fabrice Fontaine wrote: > https://www.kismetwireless.net/release/kismet-2022-08-R1/ > > Signed-off-by: Fabrice Fontaine > --- > package/kismet/kismet.hash | 2 +- > package/kismet/kismet.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:09:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:09:25 +0100 Subject: [Buildroot] [git commit] package/lz4: fix static build Message-ID: <20221030110934.151C487473@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=85c20ffa95a145e418e82f7a7106a857b5230a1e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following static build failure raised since bump to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compiling dynamic library 1.9.4 /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': (.text+0x1c): undefined reference to `main' Fixes: - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../lz4/0001-build-Support-BUILD_SHARED-no.patch | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/package/lz4/0001-build-Support-BUILD_SHARED-no.patch b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch new file mode 100644 index 0000000000..d2d8639a3b --- /dev/null +++ b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch @@ -0,0 +1,42 @@ +From 5ccbd38277989ae6a728171d59ae03bad6f2f4d5 Mon Sep 17 00:00:00 2001 +From: Fotis Xenakis +Date: Tue, 13 Sep 2022 20:09:36 +0300 +Subject: [PATCH] build: Support BUILD_SHARED=no + +Since e585a438c714652e866a59371b287f52aa4d2dc3, the BUILD_SHARED +Makefile variable only takes effect for the install target (i.e. the +shared libraries always built). This restores the original behaviour. + +[Retrieved from: +https://github.com/lz4/lz4/commit/5ccbd38277989ae6a728171d59ae03bad6f2f4d5] +Signed-off-by: Fabrice Fontaine +--- + lib/Makefile | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/lib/Makefile b/lib/Makefile +index 06503cb2a..ee262c0df 100644 +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -112,17 +112,21 @@ liblz4-dll.o: liblz4-dll.rc + $(WINDRES) -i liblz4-dll.rc -o liblz4-dll.o + + $(LIBLZ4): $(SRCFILES) liblz4-dll.o ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -DLZ4_DLL_EXPORT=1 -shared $^ -o dll/$@.dll -Wl,--out-implib,dll/$(LIBLZ4_EXP) ++endif + + else # not windows + + $(LIBLZ4): $(SRCFILES) ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -shared $^ -fPIC -fvisibility=hidden $(SONAME_FLAGS) -o $@ + @echo creating versioned links + $(LN_SF) $@ liblz4.$(SHARED_EXT_MAJOR) + $(LN_SF) $@ liblz4.$(SHARED_EXT) ++endif + + endif + From thomas.petazzoni at bootlin.com Sun Oct 30 11:09:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:09:41 +0100 Subject: [Buildroot] [PATCH 1/1] package/lz4: fix static build In-Reply-To: <20221028164800.16655-1-fontaine.fabrice@gmail.com> References: <20221028164800.16655-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120941.06aa98ac@windsurf> On Fri, 28 Oct 2022 18:48:00 +0200 Fabrice Fontaine wrote: > Fix the following static build failure raised since bump to version > 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: > > compiling dynamic library 1.9.4 > /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': > (.text+0x1c): undefined reference to `main' > > Fixes: > - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 > > Signed-off-by: Fabrice Fontaine > --- > .../0001-build-Support-BUILD_SHARED-no.patch | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 package/lz4/0001-build-Support-BUILD_SHARED-no.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:12 +0100 Subject: [Buildroot] [PATCH] package/sentry-cli: fix build failure by bumping to 2.8.0 In-Reply-To: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> References: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030121012.16d94116@windsurf> On Wed, 26 Oct 2022 21:36:05 +0200 Thomas Petazzoni via buildroot wrote: > For a very long time, host-sentry-cli has been failing to build with: > > error[E0512]: cannot transmute between types of different sizes, or dependently-sized types > --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 > | > 176 | mem::transmute::(v4); > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > | > = note: source type: `SocketAddrV4` (48 bits) > = note: target type: `sockaddr_in` (128 bits) > > For more information about this error, try `rustc --explain E0512`. > error: could not compile `socket2` due to previous error > > This socket2 create issue has apparently been fixed by upstream commit > https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, > as it removes/reworks the problematic code. This commit has been part > of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 > in version 0.3.2. > > The next version of sentry-cli that has moved to a more recent > version of socket2 is 1.61.0, however this one also fails to build > with: > > Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) > warning: fields `schemes` and `name` are never read > --> src/utils/xcode.rs:41:5 > | > 39 | pub struct XcodeProjectInfo { > | ---------------- fields in this struct > 40 | targets: Vec, > 41 | schemes: Vec, > | ^^^^^^^ > 42 | configurations: Vec, > 43 | name: String, > | ^^^^ > | > = note: `#[warn(dead_code)]` on by default > = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis > > warning: `sentry-cli` (bin "sentry-cli") generated 1 warning > Finished release [optimized] target(s) in 55.05s > Installing /home/buildroot/buildroot/output/host/bin/sentry-cli > Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) > > So we just gave up, and went for building the very lastest sentry-cli > version, 2.8.0, which apparently builds fine, at least in the > configurations that used to previously fail. > > Yes, such a huge version bump is probably not ideal as a "minimal fix" > to backport on our stable branches, but that's probably the best we > can do without investing too much effort into this package that is > otherwise poorly maintained in Buildroot, as nobody stepped up to > address the issue even though it has been failing for months. > > Fixes: > > http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ > > Signed-off-by: Thomas Petazzoni > --- > package/sentry-cli/sentry-cli.hash | 2 +- > package/sentry-cli/sentry-cli.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:01 +0100 Subject: [Buildroot] [git commit] package/sentry-cli: fix build failure by bumping to 2.8.0 Message-ID: <20221030111047.DF3A587481@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2ee966794a5ab3adfc192525fe07945b671760d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For a very long time, host-sentry-cli has been failing to build with: error[E0512]: cannot transmute between types of different sizes, or dependently-sized types --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 | 176 | mem::transmute::(v4); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: source type: `SocketAddrV4` (48 bits) = note: target type: `sockaddr_in` (128 bits) For more information about this error, try `rustc --explain E0512`. error: could not compile `socket2` due to previous error This socket2 create issue has apparently been fixed by upstream commit https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, as it removes/reworks the problematic code. This commit has been part of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 in version 0.3.2. The next version of sentry-cli that has moved to a more recent version of socket2 is 1.61.0, however this one also fails to build with: Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) warning: fields `schemes` and `name` are never read --> src/utils/xcode.rs:41:5 | 39 | pub struct XcodeProjectInfo { | ---------------- fields in this struct 40 | targets: Vec, 41 | schemes: Vec, | ^^^^^^^ 42 | configurations: Vec, 43 | name: String, | ^^^^ | = note: `#[warn(dead_code)]` on by default = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis warning: `sentry-cli` (bin "sentry-cli") generated 1 warning Finished release [optimized] target(s) in 55.05s Installing /home/buildroot/buildroot/output/host/bin/sentry-cli Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) So we just gave up, and went for building the very lastest sentry-cli version, 2.8.0, which apparently builds fine, at least in the configurations that used to previously fail. Yes, such a huge version bump is probably not ideal as a "minimal fix" to backport on our stable branches, but that's probably the best we can do without investing too much effort into this package that is otherwise poorly maintained in Buildroot, as nobody stepped up to address the issue even though it has been failing for months. Fixes: http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ Signed-off-by: Thomas Petazzoni --- package/sentry-cli/sentry-cli.hash | 2 +- package/sentry-cli/sentry-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sentry-cli/sentry-cli.hash b/package/sentry-cli/sentry-cli.hash index 73f818125f..3562199a82 100644 --- a/package/sentry-cli/sentry-cli.hash +++ b/package/sentry-cli/sentry-cli.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 d687336379fd96c4ee73f24bd062d31672bd7453af53311b72977be3c8c78fef sentry-cli-1.59.0.tar.gz +sha256 fa06f9f47782713eef8a4f10b674e2375b9439360ab34b37558ec4b30ec84861 sentry-cli-2.8.0.tar.gz sha256 9503def7b54ceb6e3cd182fd59bc05d3a30d7eae481e65aaba4b495133c83c14 LICENSE diff --git a/package/sentry-cli/sentry-cli.mk b/package/sentry-cli/sentry-cli.mk index 58f5f1e325..15094c2d01 100644 --- a/package/sentry-cli/sentry-cli.mk +++ b/package/sentry-cli/sentry-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -SENTRY_CLI_VERSION = 1.59.0 +SENTRY_CLI_VERSION = 2.8.0 SENTRY_CLI_SITE = $(call github,getsentry,sentry-cli,$(SENTRY_CLI_VERSION)) SENTRY_CLI_LICENSE = BSD-3-clause SENTRY_CLI_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:39 +0100 Subject: [Buildroot] [git commit] package/nodejs: drop support for the MIPS architecture Message-ID: <20221030111047.E8FE487482@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69d311687abd005dddf3621b7b52a397e75ad8ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The build of NodeJS fails on mipsel due to an issue in the V8 code: ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous 4106 | Operand(static_cast(0))); There is apparently a lack of maintenance of the MIPS port of V8, as is discussed in the Github issue at https://github.com/nodejs/node/issues/26179. Until this get improved/fixed, our best option is to drop support for MIPS in our NodeJS package. Fixes: http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ Signed-off-by: Thomas Petazzoni --- package/nodejs/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 5375dfeacd..1489306be0 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -2,7 +2,6 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS bool # On ARM, at least ARMv6+ with VFPv2+ is needed default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 && BR2_ARM_CPU_HAS_VFPV2 - default y if BR2_mipsel && !BR2_MIPS_SOFT_FLOAT default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:46 +0100 Subject: [Buildroot] [PATCH] package/nodejs: drop support for the MIPS architecture In-Reply-To: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> References: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030121046.380d3373@windsurf> On Wed, 26 Oct 2022 19:57:05 +0200 Thomas Petazzoni via buildroot wrote: > The build of NodeJS fails on mipsel due to an issue in the V8 code: > > ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous > 4106 | Operand(static_cast(0))); > > There is apparently a lack of maintenance of the MIPS port of V8, as > is discussed in the Github issue at > https://github.com/nodejs/node/issues/26179. > > Until this get improved/fixed, our best option is to drop support for > MIPS in our NodeJS package. > > Fixes: > > http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ > > Signed-off-by: Thomas Petazzoni > --- > package/nodejs/Config.in | 1 - > 1 file changed, 1 deletion(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Sun Oct 30 11:42:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:42:41 +0100 Subject: [Buildroot] [git commit] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE Message-ID: <20221030114429.0F97B8749E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e1550ef755c90ccaa63b9d4ed805e1f85f73142f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master In the internal toolchain backend, we have a choice..endchoice block to allow the user to select the C library, between glibc, uClibc and musl. However, there are situations were no C library at all is supported. In this case, the choice does not appear, and does not allow to see the Config.in comments that are within the choice..endchoice block and that may explain why no C library is available. For example, on RISC-V 32-bit, the only C library supported is glibc, and the minimum kernel header version required by glibc on this architecture is 5.4.0. In a future commit, we are going to add this dependency on glibc (to fix build issues on configurations that have headers < 5.4.0). But since glibc is the only supported C library on RISC-V 32-bit, it means that the choice..endchoice for the C library contains no entry, preventing from seeing the Config.in comment. To address this issue, this commit adds a "dummy" BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the choice..endchoice only when no C library is available. Thanks to this, the choice..endchoice is never empty, and the Config.in comments can be seen. If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the build will anyway abort early because package/Makefile.in has a check to verify that a C library is selected, and aborts the build if not. Some could say that the problem should be resolved by instead preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that is difficult to do as the user can choose a custom header version, or simply specific that (s)he wants to use the headers of the kernel being built. In those situations, it's difficult to prevent selecting headers < 5.4.0. Prevent random configurations from triggering a build failure in our autobuilders, by excluding that symbol from accepted configuration. Signed-off-by: Thomas Petazzoni [yann.morin.1998 at free.fr: update genrandconfig] Signed-off-by: Yann E. MORIN --- toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ utils/genrandconfig | 4 ++++ 2 files changed, 16 insertions(+) diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 6d55f87435..26d731d976 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL https://www.musl-libc.org/ +config BR2_TOOLCHAIN_BUILDROOT_NONE + bool "none" + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ + !BR2_PACKAGE_GLIBC_SUPPORTS && \ + !BR2_PACKAGE_MUSL_SUPPORTS + help + This option is visible if no C library is available for the + currently selected configuration. If you select this option, + the build will refuse to start as Buildroot needs a C + library to build a toolchain. Change your configuration + settings to make sure one of the C libraries is selected. + endchoice config BR2_TOOLCHAIN_BUILDROOT_LIBC diff --git a/utils/genrandconfig b/utils/genrandconfig index e43452d5b7..257fe7b520 100755 --- a/utils/genrandconfig +++ b/utils/genrandconfig @@ -301,6 +301,10 @@ def fixup_config(sysinfo, configfile): if 'BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII=y\n' in configlines and \ 'BR2_PACKAGE_FLANN=y\n' in configlines: return False + # No C library for internal toolchain + if 'BR2_TOOLCHAIN_BUILDROOT_NONE=y' in configlines: + return False + if 'BR2_PACKAGE_AUFS_UTIL=y\n' in configlines and \ 'BR2_PACKAGE_AUFS_UTIL_VERSION=""\n' in configlines: return False From yann.morin.1998 at free.fr Sun Oct 30 11:44:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:44:15 +0100 Subject: [Buildroot] [git commit] package/glibc: headers >= 5.4 needed on RISC-V 32-bit Message-ID: <20221030114429.1C2D48749F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b3f0153bb5accd1f543a43088a8cf792cda95fc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since glibc 2.33 (upstream commit 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed to build glibc for RISC-V 32-bit. Indeed sysdeps/unix/sysv/linux/riscv/configure.ac contains: if test $libc_cv_riscv_int_abi = ilp32; then arch_minimum_kernel=5.4.0 fi In order to take into account this dependency, we add the appropriate logic in package/glibc/Config.in and toolchain/toolchain-buildroot/Config.in. This change means that if headers < 5.4.0 are selected, then no C library at all will be available for RISC-V 32-bit, as glibc is the only C library supporting RISC-V 32-bit currently. However, thanks to the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the choice...endchoice for the C library selection will not be empty, allowing the user to see the Config.in comment explaining why glibc can't be selected. Therefore, technically this commit does prevent from creating a configuration with RISC-V 32-bit and headers < 5.4.0, but it will have BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by package/Makefile.in, which aborts the build early on pointing out that the configuration is invalid. Fixes: http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ Signed-off-by: Thomas Petazzoni Reviewed-by: Alistair Francis Signed-off-by: Yann E. MORIN --- package/glibc/Config.in | 1 + toolchain/toolchain-buildroot/Config.in | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/package/glibc/Config.in b/package/glibc/Config.in index b63f99b0b4..71c50504ac 100644 --- a/package/glibc/Config.in +++ b/package/glibc/Config.in @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 26d731d976..64f7892f98 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" depends on BR2_RISCV_64 depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" + depends on BR2_RISCV_32 + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 + comment "glibc on ARC needs a toolchain w/ headers >= 5.1" depends on BR2_arc depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 From yann.morin.1998 at free.fr Sun Oct 30 11:45:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:45:06 +0100 Subject: [Buildroot] [PATCH 1/2] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE In-Reply-To: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030114506.GD1058960@scaer> Thomas, All, On 2022-10-26 20:34 +0200, Thomas Petazzoni via buildroot spake thusly: > In the internal toolchain backend, we have a choice..endchoice block > to allow the user to select the C library, between glibc, uClibc and > musl. > > However, there are situations were no C library at all is > supported. In this case, the choice does not appear, and does not > allow to see the Config.in comments that are within the > choice..endchoice block and that may explain why no C library is > available. > > For example, on RISC-V 32-bit, the only C library supported is glibc, > and the minimum kernel header version required by glibc on this > architecture is 5.4.0. In a future commit, we are going to add this > dependency on glibc (to fix build issues on configurations that have > headers < 5.4.0). But since glibc is the only supported C library on > RISC-V 32-bit, it means that the choice..endchoice for the C library > contains no entry, preventing from seeing the Config.in comment. > > To address this issue, this commit adds a "dummy" > BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the > choice..endchoice only when no C library is available. Thanks to this, > the choice..endchoice is never empty, and the Config.in comments can > be seen. > > If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the > build will anyway abort early because package/Makefile.in has a check > to verify that a C library is selected, and aborts the build if not. > > Some could say that the problem should be resolved by instead > preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that > is difficult to do as the user can choose a custom header version, or > simply specific that (s)he wants to use the headers of the kernel > being built. In those situations, it's difficult to prevent selecting > headers < 5.4.0. > > Signed-off-by: Thomas Petazzoni As discussed on IRC, I added an exclusiong in genrandconfig. Applied to master, thanks. Regards, Yann E. MORIN. > --- > toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 6d55f87435..26d731d976 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL > > https://www.musl-libc.org/ > > +config BR2_TOOLCHAIN_BUILDROOT_NONE > + bool "none" > + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ > + !BR2_PACKAGE_GLIBC_SUPPORTS && \ > + !BR2_PACKAGE_MUSL_SUPPORTS > + help > + This option is visible if no C library is available for the > + currently selected configuration. If you select this option, > + the build will refuse to start as Buildroot needs a C > + library to build a toolchain. Change your configuration > + settings to make sure one of the C libraries is selected. > + > endchoice > > config BR2_TOOLCHAIN_BUILDROOT_LIBC > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 11:45:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:45:19 +0100 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Message-ID: <20221030114519.GE1058960@scaer> Thomas, All, On 2022-10-26 20:34 +0200, Thomas Petazzoni via buildroot spake thusly: > Since glibc 2.33 (upstream commit > 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed > to build glibc for RISC-V 32-bit. Indeed > sysdeps/unix/sysv/linux/riscv/configure.ac contains: > > if test $libc_cv_riscv_int_abi = ilp32; then > arch_minimum_kernel=5.4.0 > fi > > In order to take into account this dependency, we add the appropriate > logic in package/glibc/Config.in and > toolchain/toolchain-buildroot/Config.in. > > This change means that if headers < 5.4.0 are selected, then no C > library at all will be available for RISC-V 32-bit, as glibc is the > only C library supporting RISC-V 32-bit currently. However, thanks to > the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the > choice...endchoice for the C library selection will not be empty, > allowing the user to see the Config.in comment explaining why glibc > can't be selected. > > Therefore, technically this commit does prevent from creating a > configuration with RISC-V 32-bit and headers < 5.4.0, but it will have > BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by > package/Makefile.in, which aborts the build early on pointing out that > the configuration is invalid. > > Fixes: > > http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ > > Signed-off-by: Thomas Petazzoni Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/glibc/Config.in | 1 + > toolchain/toolchain-buildroot/Config.in | 4 ++++ > 2 files changed, 5 insertions(+) > > diff --git a/package/glibc/Config.in b/package/glibc/Config.in > index b63f99b0b4..71c50504ac 100644 > --- a/package/glibc/Config.in > +++ b/package/glibc/Config.in > @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 26d731d976..64f7892f98 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" > depends on BR2_RISCV_64 > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 > > +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" > + depends on BR2_RISCV_32 > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 > + > comment "glibc on ARC needs a toolchain w/ headers >= 5.1" > depends on BR2_arc > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 30 12:53:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 13:53:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/kmemd: needs headers >= 5.14 Message-ID: <20221030125358.387628-1-fontaine.fabrice@gmail.com> kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only available since kernel 5.14 and https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 resulting in the following build failure since the addition of the package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ | ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc Signed-off-by: Fabrice Fontaine --- package/kmemd/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in index 902e636947..cd92757508 100644 --- a/package/kmemd/Config.in +++ b/package/kmemd/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_KMEMD depends on BR2_USE_WCHAR # libbpf depends on !BR2_STATIC_LIBS # libbpf depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf select BR2_PACKAGE_LIBBPF help @@ -12,7 +12,7 @@ config BR2_PACKAGE_KMEMD https://github.com/wkz/kmemd -comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 5.14" depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 12:55:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 13:55:54 +0100 Subject: [Buildroot] [PATCH 1/1] package/dahdi-linux: fix build with kernel >= 5.18 Message-ID: <20221030125554.394467-1-fontaine.fabrice@gmail.com> Fix the following build failure with kernel >= 5.18 raised since bump to version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ?t4_allocate_buffers?: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ?pci_alloc_consistent? [-Werror=implicit-function-declaration] 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, | ^~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 Signed-off-by: Fabrice Fontaine --- ...lation-issues-on-linux-kernel-5-18-0.patch | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch diff --git a/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch new file mode 100644 index 0000000000..a896def375 --- /dev/null +++ b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch @@ -0,0 +1,58 @@ +From dbb43101c2a9205b67223b006bf75c29ebadced9 Mon Sep 17 00:00:00 2001 +From: Pushkar Singh +Date: Tue, 2 Aug 2022 19:40:00 +0530 +Subject: [PATCH] Fixed compilation issues on linux kernel >= 5.18.0 + +With kernel 5.18 and higher +PCI: Remove the deprecated "pci-dma-compat.h" API + +The commit will make sure to impplement pci dma related api's +[Retrieved from: +https://github.com/asterisk/dahdi-linux/commit/dbb43101c2a9205b67223b006bf75c29ebadced9] +Signed-off-by: Fabrice Fontaine +--- + include/dahdi/kernel.h | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/include/dahdi/kernel.h b/include/dahdi/kernel.h +index ed81e9e3..35e93bc4 100644 +--- a/include/dahdi/kernel.h ++++ b/include/dahdi/kernel.h +@@ -58,6 +58,37 @@ + + #include + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0) ++#include ++#include ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) ++{ ++ return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC); ++} ++ ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) ++{ ++ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle); ++} ++ ++static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) ++{ ++ return dma_map_single(&hwdev->dev, ptr, size, (enum dma_data_direction)direction); ++} ++ ++static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction) ++{ ++ dma_unmap_single(&hwdev->dev, dma_addr, size, (enum dma_data_direction)direction); ++} ++ ++static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ return dma_set_mask(&dev->dev, mask); ++} ++ ++#endif ++ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) + #define HAVE_NET_DEVICE_OPS + #endif -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:01:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:01:44 +0100 Subject: [Buildroot] [PATCH 1/1] package/mbuffer: bump to version 20220418 Message-ID: <20221030130144.399291-1-fontaine.fabrice@gmail.com> Signed-off-by: Fabrice Fontaine --- package/mbuffer/mbuffer.hash | 4 ++-- package/mbuffer/mbuffer.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mbuffer/mbuffer.hash b/package/mbuffer/mbuffer.hash index bab568d1d8..8f7b8dd07b 100644 --- a/package/mbuffer/mbuffer.hash +++ b/package/mbuffer/mbuffer.hash @@ -1,8 +1,8 @@ # From http://www.maier-komor.de/mbuffer.html -md5 b6787260112e3ac416c0febdb097caa8 mbuffer-20211018.tgz +md5 90e183efeec2812e2413e97b65600acc mbuffer-20220418.tgz # Locally computed after checking signature upstream -sha256 e240c1e4e4ac14c28be8c660ec47d44ce16b1e8ec92aa907ad13004ffd5db6e3 mbuffer-20211018.tgz +sha256 6e5801f9f5ff11445d1d03028b5a03cd08af5408697b7f94c427833228a300c7 mbuffer-20220418.tgz # Hash for license file sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/mbuffer/mbuffer.mk b/package/mbuffer/mbuffer.mk index bbf27579f1..6381d97e8a 100644 --- a/package/mbuffer/mbuffer.mk +++ b/package/mbuffer/mbuffer.mk @@ -4,7 +4,7 @@ # ################################################################################ -MBUFFER_VERSION = 20211018 +MBUFFER_VERSION = 20220418 MBUFFER_SOURCE = mbuffer-$(MBUFFER_VERSION).tgz MBUFFER_SITE = http://www.maier-komor.de/software/mbuffer MBUFFER_LICENSE = GPL-3.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:07:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:07:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/matio: bump to version 1.5.23 Message-ID: <20221030130723.408004-1-fontaine.fabrice@gmail.com> https://github.com/tbeu/matio/releases/tag/v1.5.23 Signed-off-by: Fabrice Fontaine --- package/matio/matio.hash | 4 ++-- package/matio/matio.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/matio/matio.hash b/package/matio/matio.hash index 4634074ca0..94e0e48f69 100644 --- a/package/matio/matio.hash +++ b/package/matio/matio.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/projects/matio/files/matio/1.5.22/ -sha512 33fd3991413e94dfc9aba13ffd08b09ddcbdb9dfa579124d981449e195a8c61a3dc95b55e46bba360d48456c117cf36403af1c3448689c26b8aea5fa9cf38323 matio-1.5.22.tar.gz +# From https://sourceforge.net/projects/matio/files/matio/1.5.23/ +sha512 e125278dcb25695affb7c576d0e2a86c0eff4225aa866b81536c9e4d7b2aea2c554f5389e96d534a8b559f5554b6cbecff4b44fe8915173cd64b2da6d1dc2629 matio-1.5.23.tar.gz # Locally computed sha256 3ed9a50d754fcc92d4accb8448e397eafeab686796b2a7445557ce782806e239 COPYING diff --git a/package/matio/matio.mk b/package/matio/matio.mk index d282852d37..5e09f4e6ce 100644 --- a/package/matio/matio.mk +++ b/package/matio/matio.mk @@ -4,7 +4,7 @@ # ################################################################################ -MATIO_VERSION = 1.5.22 +MATIO_VERSION = 1.5.23 MATIO_SITE = http://downloads.sourceforge.net/project/matio/matio/$(MATIO_VERSION) MATIO_LICENSE = BSD-2-Clause MATIO_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:10:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:10:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/mcelog: bump to version 189 Message-ID: <20221030131048.410237-1-fontaine.fabrice@gmail.com> https://github.com/andikleen/mcelog/releases/tag/v189 https://github.com/andikleen/mcelog/releases/tag/v188 Signed-off-by: Fabrice Fontaine --- package/mcelog/mcelog.hash | 2 +- package/mcelog/mcelog.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mcelog/mcelog.hash b/package/mcelog/mcelog.hash index c64e652453..e0350b085d 100644 --- a/package/mcelog/mcelog.hash +++ b/package/mcelog/mcelog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 02eb3f4cb0976048f191d124fb45a1720caf082cd246d858acb0a39a9d026641 mcelog-187.tar.gz +sha256 30364d134ff416f3f9469720add84bdccea226268d334f06022110f484550cd9 mcelog-189.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/mcelog/mcelog.mk b/package/mcelog/mcelog.mk index de1b76cfd3..8b5876d32e 100644 --- a/package/mcelog/mcelog.mk +++ b/package/mcelog/mcelog.mk @@ -4,7 +4,7 @@ # ################################################################################ -MCELOG_VERSION = 187 +MCELOG_VERSION = 189 MCELOG_SITE = $(call github,andikleen,mcelog,v$(MCELOG_VERSION)) MCELOG_LICENSE = GPL-2.0 MCELOG_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:17:18 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:17:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/mongoose: bump to version 7.8 Message-ID: <20221030131718.422677-1-fontaine.fabrice@gmail.com> Update hash of license file (date and URL updated with https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) https://github.com/cesanta/mongoose/releases/tag/7.8 https://github.com/cesanta/mongoose/releases/tag/7.7 https://github.com/cesanta/mongoose/releases/tag/7.6 https://github.com/cesanta/mongoose/releases/tag/7.5 https://github.com/cesanta/mongoose/releases/tag/7.4 https://github.com/cesanta/mongoose/releases/tag/7.3 Signed-off-by: Fabrice Fontaine --- package/mongoose/mongoose.hash | 4 ++-- package/mongoose/mongoose.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mongoose/mongoose.hash b/package/mongoose/mongoose.hash index 809f160cf0..ffef9f446c 100644 --- a/package/mongoose/mongoose.hash +++ b/package/mongoose/mongoose.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8c5024a4e5b5a0c7fdae3c24ebc68e2b3ccfaba08cf25c2e76fc7f14f92fd4a5 mongoose-7.2.tar.gz -sha256 9553d057f2ba980642f2c18d87ed38896cff1c9612d77d684a73a11fe1443b05 LICENSE +sha256 55073dcd427ab9475731ad855e417884f4fbfb24b7d5694f6cabadbee1329f16 mongoose-7.8.tar.gz +sha256 b41c293820074278291813af9f181918154875c94d744a90bf4eec331be28ac5 LICENSE diff --git a/package/mongoose/mongoose.mk b/package/mongoose/mongoose.mk index 2c5df1d0cc..8d06ed4689 100644 --- a/package/mongoose/mongoose.mk +++ b/package/mongoose/mongoose.mk @@ -4,7 +4,7 @@ # ################################################################################ -MONGOOSE_VERSION = 7.2 +MONGOOSE_VERSION = 7.8 MONGOOSE_SITE = $(call github,cesanta,mongoose,$(MONGOOSE_VERSION)) MONGOOSE_LICENSE = GPL-2.0 MONGOOSE_LICENSE_FILES = LICENSE -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 14:00:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:00:35 +0100 Subject: [Buildroot] [PATCH 1/4] package/alsa-lib: disable topology modules for static builds In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221030150035.48cf618b@windsurf> Hello, On Fri, 28 Oct 2022 21:15:23 +0200 Bernd Kuhls wrote: > With this fix to alsa-lib we can remove a patch from alsa-utils which > fixed its static build. A static build of topology modules is not > supported by upstream however: > > "Note that it does not make sense to build static topology modules. > They are not usable." > https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 > > Signed-off-by: Bernd Kuhls > --- > package/alsa-lib/alsa-lib.mk | 1 + > ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- > package/alsa-utils/alsa-utils.mk | 3 -- > 3 files changed, 1 insertion(+), 51 deletions(-) > delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > > diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk > index f3ed195a5c..6e474aa5e2 100644 > --- a/package/alsa-lib/alsa-lib.mk > +++ b/package/alsa-lib/alsa-lib.mk > @@ -25,6 +25,7 @@ endif > # Can't build with static & shared at the same time (1.0.25+) > ifeq ($(BR2_STATIC_LIBS),y) > ALSA_LIB_CONF_OPTS += \ > + --disable-topology \ I think we should make this an explicit Config.in option of the alsa-lib package, which depends on !BR2_STATIC_LIBS, so that the packages that need that library can then select this option, and properly propagate the !BR2_STATIC_LIBS dependency. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:02:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:02:56 +0100 Subject: [Buildroot] [git commit] package/kmemd: needs headers >= 5.14 Message-ID: <20221030140306.AE89F874AC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cd317f701b60ddbf546504bf3f8aca6b960e05af branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only available since kernel 5.14 and https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 resulting in the following build failure since the addition of the package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ | ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/kmemd/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in index 902e636947..cd92757508 100644 --- a/package/kmemd/Config.in +++ b/package/kmemd/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_KMEMD depends on BR2_USE_WCHAR # libbpf depends on !BR2_STATIC_LIBS # libbpf depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf select BR2_PACKAGE_LIBBPF help @@ -12,7 +12,7 @@ config BR2_PACKAGE_KMEMD https://github.com/wkz/kmemd -comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 5.14" depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ From thomas.petazzoni at bootlin.com Sun Oct 30 14:02:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:02:56 +0100 Subject: [Buildroot] [git commit] package/dahdi-linux: fix build with kernel >= 5.18 Message-ID: <20221030140306.B89B6874AD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c4db8416ff2c9ace3c79a71ccfa3d942daadd093 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure with kernel >= 5.18 raised since bump to version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ???t4_allocate_buffers???: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ???pci_alloc_consistent??? [-Werror=implicit-function-declaration] 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, | ^~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...compilation-issues-on-linux-kernel-5-18-0.patch | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch new file mode 100644 index 0000000000..a896def375 --- /dev/null +++ b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch @@ -0,0 +1,58 @@ +From dbb43101c2a9205b67223b006bf75c29ebadced9 Mon Sep 17 00:00:00 2001 +From: Pushkar Singh +Date: Tue, 2 Aug 2022 19:40:00 +0530 +Subject: [PATCH] Fixed compilation issues on linux kernel >= 5.18.0 + +With kernel 5.18 and higher +PCI: Remove the deprecated "pci-dma-compat.h" API + +The commit will make sure to impplement pci dma related api's +[Retrieved from: +https://github.com/asterisk/dahdi-linux/commit/dbb43101c2a9205b67223b006bf75c29ebadced9] +Signed-off-by: Fabrice Fontaine +--- + include/dahdi/kernel.h | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/include/dahdi/kernel.h b/include/dahdi/kernel.h +index ed81e9e3..35e93bc4 100644 +--- a/include/dahdi/kernel.h ++++ b/include/dahdi/kernel.h +@@ -58,6 +58,37 @@ + + #include + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0) ++#include ++#include ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) ++{ ++ return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC); ++} ++ ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) ++{ ++ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle); ++} ++ ++static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) ++{ ++ return dma_map_single(&hwdev->dev, ptr, size, (enum dma_data_direction)direction); ++} ++ ++static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction) ++{ ++ dma_unmap_single(&hwdev->dev, dma_addr, size, (enum dma_data_direction)direction); ++} ++ ++static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ return dma_set_mask(&dev->dev, mask); ++} ++ ++#endif ++ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) + #define HAVE_NET_DEVICE_OPS + #endif From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/kmemd: needs headers >= 5.14 In-Reply-To: <20221030125358.387628-1-fontaine.fabrice@gmail.com> References: <20221030125358.387628-1-fontaine.fabrice@gmail.com> Message-ID: <20221030150318.45f4f1af@windsurf> On Sun, 30 Oct 2022 13:53:58 +0100 Fabrice Fontaine wrote: > kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only > available since kernel 5.14 and > https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 > resulting in the following build failure since the addition of the > package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: > > kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? > 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ > | ^~~~~~~~~~~~~~~~~~~~~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc > > Signed-off-by: Fabrice Fontaine > --- > package/kmemd/Config.in | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:25 +0100 Subject: [Buildroot] [PATCH 1/1] package/dahdi-linux: fix build with kernel >= 5.18 In-Reply-To: <20221030125554.394467-1-fontaine.fabrice@gmail.com> References: <20221030125554.394467-1-fontaine.fabrice@gmail.com> Message-ID: <20221030150325.41df6969@windsurf> On Sun, 30 Oct 2022 13:55:54 +0100 Fabrice Fontaine wrote: > Fix the following build failure with kernel >= 5.18 raised since bump to > version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: > > /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ?t4_allocate_buffers?: > /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ?pci_alloc_consistent? [-Werror=implicit-function-declaration] > 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, > | ^~~~~~~~~~~~~~~~~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 > > Signed-off-by: Fabrice Fontaine > --- > ...lation-issues-on-linux-kernel-5-18-0.patch | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:55 +0100 Subject: [Buildroot] [git commit] package/python-weasyprint: bump to version 57.0 Message-ID: <20221030140545.42A4987512@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6b897930f503a5a99e031789d8ccf6ca37d9a7b9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-weasyprint/python-weasyprint.hash | 4 ++-- package/python-weasyprint/python-weasyprint.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-weasyprint/python-weasyprint.hash b/package/python-weasyprint/python-weasyprint.hash index 68b895361b..21e58d3677 100644 --- a/package/python-weasyprint/python-weasyprint.hash +++ b/package/python-weasyprint/python-weasyprint.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/weasyprint/json -md5 0a339942d1d238aa0b974c1ec1580c03 weasyprint-56.1.tar.gz -sha256 27f796abce8edebc9e5b3cff2d095a9fa2b0af5766801431659db51203c70b38 weasyprint-56.1.tar.gz +md5 b270213554d781c86b6c3d390b097f2f weasyprint-57.0.tar.gz +sha256 7b6f5cc13819e9a7d8748c1dbf0e8d2444f7a4818a98339f82dccaa822bf911b weasyprint-57.0.tar.gz # Locally computed sha256 checksums sha256 bfd14eccfa6100575460e685556b183399d4bd335904e3c9521b0116d21c54da LICENSE diff --git a/package/python-weasyprint/python-weasyprint.mk b/package/python-weasyprint/python-weasyprint.mk index aff9a31a43..9dd364e1c1 100644 --- a/package/python-weasyprint/python-weasyprint.mk +++ b/package/python-weasyprint/python-weasyprint.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WEASYPRINT_VERSION = 56.1 +PYTHON_WEASYPRINT_VERSION = 57.0 PYTHON_WEASYPRINT_SOURCE = weasyprint-$(PYTHON_WEASYPRINT_VERSION).tar.gz -PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/30/2c/9c29989bf03bb573bd963c2cf167839099bdaff05aff1f0eff2ccbd1b509 +PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/b7/98/cd0df64b306ac901ffd53c50d9d5d79d92cae756b6469fc14771adb39d77 PYTHON_WEASYPRINT_SETUP_TYPE = flit PYTHON_WEASYPRINT_LICENSE = BSD-3-Clause PYTHON_WEASYPRINT_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:56 +0100 Subject: [Buildroot] [git commit] package/python-pydyf: bump to version 0.5.0 Message-ID: <20221030140545.4E0DF87513@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb780a19d05e14188eba0a4fa1e867fb09dd6c92 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-pydyf/python-pydyf.hash | 4 ++-- package/python-pydyf/python-pydyf.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pydyf/python-pydyf.hash b/package/python-pydyf/python-pydyf.hash index 4c80d3fce6..1b37e90e73 100644 --- a/package/python-pydyf/python-pydyf.hash +++ b/package/python-pydyf/python-pydyf.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/pydyf/json -md5 3afeaff9db93af8b317c909196522ddd pydyf-0.3.0.tar.gz -sha256 1aea6c0c97cc7b809efb5427147e168a5404ed76a53d76a3aea590d4ca1b04a3 pydyf-0.3.0.tar.gz +md5 6b2a02162a3f4be9464d7b4043953d33 pydyf-0.5.0.tar.gz +sha256 51e751ae1504037c1fc1f4815119137b011802cd5f6c3539db066c455b14a7e1 pydyf-0.5.0.tar.gz # Locally computed sha256 checksums sha256 75461e438973e1ba0f93a7de9e3fe5b2f49e1ab49251d392878a9cdae8ce7e47 LICENSE diff --git a/package/python-pydyf/python-pydyf.mk b/package/python-pydyf/python-pydyf.mk index ae88a0eb3d..6327a3efe2 100644 --- a/package/python-pydyf/python-pydyf.mk +++ b/package/python-pydyf/python-pydyf.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYDYF_VERSION = 0.3.0 +PYTHON_PYDYF_VERSION = 0.5.0 PYTHON_PYDYF_SOURCE = pydyf-$(PYTHON_PYDYF_VERSION).tar.gz -PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/4d/12/3341ead2313889e2bf49b18ab6d65f47f8a8fb82ccb91faaf74f5e51125f +PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/f4/4c/6d31b36a46714d8206b8ca84b8dc9aaf42093415b1f50471538552abe501 PYTHON_PYDYF_SETUP_TYPE = flit PYTHON_PYDYF_LICENSE = BSD-3-Clause PYTHON_PYDYF_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:53 +0100 Subject: [Buildroot] [git commit] package/python-ujson: bump to version 5.5.0 Message-ID: <20221030140545.385AD87511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a855e21bcbcabfc6fec0c1c34bc3346180031a34 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to now supported system double-conversion library. Disable built in strip so that stripping is handled by buildroot. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-ujson/Config.in | 3 ++- package/python-ujson/python-ujson.hash | 4 ++-- package/python-ujson/python-ujson.mk | 10 +++++++--- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/package/python-ujson/Config.in b/package/python-ujson/Config.in index 7af03e6497..31b4d484d8 100644 --- a/package/python-ujson/Config.in +++ b/package/python-ujson/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_UJSON bool "python-ujson" - depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_INSTALL_LIBSTDCPP # double-conversion + select BR2_PACKAGE_DOUBLE_CONVERSION help UltraJSON is an ultra fast JSON encoder and decoder written in pure C with bindings for Python 3. diff --git a/package/python-ujson/python-ujson.hash b/package/python-ujson/python-ujson.hash index e88e273145..27df5aa355 100644 --- a/package/python-ujson/python-ujson.hash +++ b/package/python-ujson/python-ujson.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/ujson/json -md5 2c7ffd2bf23f6f07da3a0cbf5ff5c2f0 ujson-5.2.0.tar.gz -sha256 163191b88842d874e081707d35de2e205e0e396e70fd068d1038879bca8b17ad ujson-5.2.0.tar.gz +md5 73b42e3f4bf3130073cfffbd82608275 ujson-5.5.0.tar.gz +sha256 b25077a971c7da47bd6846a912a747f6963776d90720c88603b1b55d81790780 ujson-5.5.0.tar.gz # Locally computed sha256 checksums sha256 6a00a8f8b4050303368b694147bde1aed9c96bdff869c181dbbf3ccb784a1501 LICENSE.txt diff --git a/package/python-ujson/python-ujson.mk b/package/python-ujson/python-ujson.mk index 8eb5f6a0a7..95cb0ebad1 100644 --- a/package/python-ujson/python-ujson.mk +++ b/package/python-ujson/python-ujson.mk @@ -4,12 +4,16 @@ # ################################################################################ -PYTHON_UJSON_VERSION = 5.2.0 +PYTHON_UJSON_VERSION = 5.5.0 PYTHON_UJSON_SOURCE = ujson-$(PYTHON_UJSON_VERSION).tar.gz -PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/e4/fc/2dee0e78162aa1ad03dadde9a9b5c281d6f8bb0eed6810a270486d8fc041 +PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/6e/4a/03ddad85a10dd52e209993a14afa0cb0dc5c348e4647329f1c53856ad9e6 PYTHON_UJSON_SETUP_TYPE = setuptools PYTHON_UJSON_LICENSE = BSD-3-Clause PYTHON_UJSON_LICENSE_FILES = LICENSE.txt -PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm +PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm double-conversion +PYTHON_UJSON_ENV = \ + UJSON_BUILD_DC_INCLUDES="$(STAGING_DIR)/usr/include/double-conversion" \ + UJSON_BUILD_DC_LIBS="-ldouble-conversion" \ + UJSON_BUILD_NO_STRIP=1 $(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:50 +0100 Subject: [Buildroot] [git commit] package/python-aiohttp-session: bump to version 2.12.0 Message-ID: <20221030140545.24A218750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ff89dab6a0947a45a0be11cc90f4902a5e3d037d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiohttp-session/python-aiohttp-session.hash b/package/python-aiohttp-session/python-aiohttp-session.hash index 8b44318307..efdac39007 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.hash +++ b/package/python-aiohttp-session/python-aiohttp-session.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiohttp-session/json -md5 797273eb5f0ef9e95fa92c6a933cf4ad aiohttp-session-2.11.0.tar.gz -sha256 0fdf39600f6a05c4943ef6c7b099071ca9854413111a26761626244be5015dc4 aiohttp-session-2.11.0.tar.gz +md5 b89bde69f6f3c61a991ff408d2733838 aiohttp-session-2.12.0.tar.gz +sha256 0ccd11a7c77cb9e5a61f4daacdc9170d561112f9cfaf9e9a2d9867c0587d1950 aiohttp-session-2.12.0.tar.gz # Locally computed sha256 checksums sha256 7bc5dd2f229a6b922befb1427fd4ad2c0b255f12c1b1869370ba77520dc22bc7 LICENSE diff --git a/package/python-aiohttp-session/python-aiohttp-session.mk b/package/python-aiohttp-session/python-aiohttp-session.mk index 3d59b75e3d..55bf0e87f3 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.mk +++ b/package/python-aiohttp-session/python-aiohttp-session.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOHTTP_SESSION_VERSION = 2.11.0 +PYTHON_AIOHTTP_SESSION_VERSION = 2.12.0 PYTHON_AIOHTTP_SESSION_SOURCE = aiohttp-session-$(PYTHON_AIOHTTP_SESSION_VERSION).tar.gz -PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/3b/a7/0b97b9a2e3a553a86a6703f86b0e9b1afb2b262849700e8f80015c0f643f +PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/34/87/8dbc1385c875497d6bc16c9d94e25dbd8ff62599843b73fb4048ba74c867 PYTHON_AIOHTTP_SESSION_SETUP_TYPE = setuptools PYTHON_AIOHTTP_SESSION_LICENSE = Apache-2.0 PYTHON_AIOHTTP_SESSION_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:01 +0100 Subject: [Buildroot] [git commit] package/python-certifi: bump to version 2022.9.24 Message-ID: <20221030140545.6D60A87511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9af3c14b18c72d6681315280d89d428b7b212ab7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-certifi/python-certifi.hash | 4 ++-- package/python-certifi/python-certifi.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-certifi/python-certifi.hash b/package/python-certifi/python-certifi.hash index ac3d0a909b..0557a5c97c 100644 --- a/package/python-certifi/python-certifi.hash +++ b/package/python-certifi/python-certifi.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/certifi/json -md5 f919a230b999ebae1969088ca68e8367 certifi-2022.9.14.tar.gz -sha256 36973885b9542e6bd01dea287b2b4b3b21236307c56324fcc3f1160f2d655ed5 certifi-2022.9.14.tar.gz +md5 ff9c8d5c7e7fb083de6b874609c5ca68 certifi-2022.9.24.tar.gz +sha256 0d9c601124e5a6ba9712dbc60d9c53c21e34f5f641fe83002317394311bdce14 certifi-2022.9.24.tar.gz # Locally computed sha256 checksums sha256 a02f6c638f9fb84d06f7764c3ab085d8af7eda5b93c166da54312479077c6fb0 LICENSE diff --git a/package/python-certifi/python-certifi.mk b/package/python-certifi/python-certifi.mk index 2053d5e820..8e2435199f 100644 --- a/package/python-certifi/python-certifi.mk +++ b/package/python-certifi/python-certifi.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CERTIFI_VERSION = 2022.9.14 +PYTHON_CERTIFI_VERSION = 2022.9.24 PYTHON_CERTIFI_SOURCE = certifi-$(PYTHON_CERTIFI_VERSION).tar.gz -PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/ca/48/88ec470f8b68319b6782ca3a0570789886ad5ca24c1af2f3771699135baa +PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/cb/a4/7de7cd59e429bd0ee6521ba58a75adaec136d32f91a761b28a11d8088d44 PYTHON_CERTIFI_SETUP_TYPE = setuptools PYTHON_CERTIFI_LICENSE = ISC (Python code), MPL-2.0 (cacert.pem) PYTHON_CERTIFI_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:02 +0100 Subject: [Buildroot] [git commit] package/python-charset-normalizer: bump to version 3.0.0 Message-ID: <20221030140545.7787E87512@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0511458dc1ef0dd9bc65d674e6a1700f55c883e3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- package/python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-charset-normalizer/python-charset-normalizer.hash b/package/python-charset-normalizer/python-charset-normalizer.hash index 3d50b2872d..32d8a22e66 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.hash +++ b/package/python-charset-normalizer/python-charset-normalizer.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/charset-normalizer/json -md5 a70f9fc85b6b8265c982eca6fe51381f charset-normalizer-2.1.1.tar.gz -sha256 5a3d016c7c547f69d6f81fb0db9449ce888b418b5b9952cc5e6e66843e9dd845 charset-normalizer-2.1.1.tar.gz +md5 169527085be8e6bb7874164c24481eca charset-normalizer-3.0.0.tar.gz +sha256 b27d10ad15740b45fd55f76e6901a4391e6dca3917ef48ecdcf17edf6e00d770 charset-normalizer-3.0.0.tar.gz # Locally computed sha256 checksums sha256 eb31a0c5a4fb09b8a4e32055d25c1e5f9c358a2752fef3cd720213d1ccfee241 LICENSE diff --git a/package/python-charset-normalizer/python-charset-normalizer.mk b/package/python-charset-normalizer/python-charset-normalizer.mk index 72728a25b3..b2c42a74b8 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.mk +++ b/package/python-charset-normalizer/python-charset-normalizer.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CHARSET_NORMALIZER_VERSION = 2.1.1 +PYTHON_CHARSET_NORMALIZER_VERSION = 3.0.0 PYTHON_CHARSET_NORMALIZER_SOURCE = charset-normalizer-$(PYTHON_CHARSET_NORMALIZER_VERSION).tar.gz -PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/a1/34/44964211e5410b051e4b8d2869c470ae8a68ae274953b1c7de6d98bbcf94 +PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/fe/77/6d5d367b7cfee812a88573e80bbe25cea2d015ed2c3490e4464951ff3232 PYTHON_CHARSET_NORMALIZER_SETUP_TYPE = setuptools PYTHON_CHARSET_NORMALIZER_LICENSE = MIT PYTHON_CHARSET_NORMALIZER_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:59 +0100 Subject: [Buildroot] [git commit] package/python-attrs: bump to version 22.1.0 Message-ID: <20221030140545.63B1487510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=de4a180b80905ee74a064d0fbc74d8de4fea7464 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to ownership clarification: https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-attrs/python-attrs.hash | 6 +++--- package/python-attrs/python-attrs.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-attrs/python-attrs.hash b/package/python-attrs/python-attrs.hash index 823a9459bd..d5548c0ed3 100644 --- a/package/python-attrs/python-attrs.hash +++ b/package/python-attrs/python-attrs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/attrs/json -md5 5a9b5e9ceebc380a13fb93235b11bbda attrs-21.4.0.tar.gz -sha256 626ba8234211db98e869df76230a137c4c40a12d72445c45d5f5b716f076e2fd attrs-21.4.0.tar.gz +md5 0487081b7ead8753fc46cf7c6d1e28e3 attrs-22.1.0.tar.gz +sha256 29adc2665447e5191d0e7c568fde78b21f9672d344281d0c6e1ab085429b22b6 attrs-22.1.0.tar.gz # Locally computed sha256 checksums -sha256 bf659a28b49240602f56bbdf490cbe2ec509b15b98f99d7b19a52c740e327863 LICENSE +sha256 882115c95dfc2af1eeb6714f8ec6d5cbcabf667caff8729f42420da63f714e9f LICENSE diff --git a/package/python-attrs/python-attrs.mk b/package/python-attrs/python-attrs.mk index 4877d62285..33651ee80a 100644 --- a/package/python-attrs/python-attrs.mk +++ b/package/python-attrs/python-attrs.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ATTRS_VERSION = 21.4.0 +PYTHON_ATTRS_VERSION = 22.1.0 PYTHON_ATTRS_SOURCE = attrs-$(PYTHON_ATTRS_VERSION).tar.gz -PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/d7/77/ebb15fc26d0f815839ecd897b919ed6d85c050feeb83e100e020df9153d2 +PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/1a/cb/c4ffeb41e7137b23755a45e1bfec9cbb76ecf51874c6f1d113984ecaa32c PYTHON_ATTRS_SETUP_TYPE = setuptools PYTHON_ATTRS_LICENSE = MIT PYTHON_ATTRS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:52 +0100 Subject: [Buildroot] [git commit] package/python-typing-extensions: bump to version 4.4.0 Message-ID: <20221030140545.2D79287510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f3f71a4f6cede1b3461deccdf99c06017df56afa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to date/formatting updates: https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-typing-extensions/python-typing-extensions.hash | 6 +++--- package/python-typing-extensions/python-typing-extensions.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-typing-extensions/python-typing-extensions.hash b/package/python-typing-extensions/python-typing-extensions.hash index 2512ed042d..249bb63a42 100644 --- a/package/python-typing-extensions/python-typing-extensions.hash +++ b/package/python-typing-extensions/python-typing-extensions.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/typing_extensions/json -md5 30ff8c89459dd93970a92a90b0386aba typing_extensions-4.3.0.tar.gz -sha256 e6d2677a32f47fc7eb2795db1dd15c1f34eff616bcaf2cfb5e997f854fa1c4a6 typing_extensions-4.3.0.tar.gz +md5 5cfcb56ea6fc4972c3600c0030f4d136 typing_extensions-4.4.0.tar.gz +sha256 1511434bb92bf8dd198c12b1cc812e800d4181cfcb867674e0f8279cc93087aa typing_extensions-4.4.0.tar.gz # Locally computed sha256 checksums -sha256 ff17ce94e102024deb68773eb1cc74ca76da4e658f373531f0ac22d68a6bb1ad LICENSE +sha256 c7afb65e755707b9fb90487389a176d3ed3d0031d5131afde45c23715ff5e891 LICENSE diff --git a/package/python-typing-extensions/python-typing-extensions.mk b/package/python-typing-extensions/python-typing-extensions.mk index 2b8c23f354..fd7d0bd93a 100644 --- a/package/python-typing-extensions/python-typing-extensions.mk +++ b/package/python-typing-extensions/python-typing-extensions.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TYPING_EXTENSIONS_VERSION = 4.3.0 +PYTHON_TYPING_EXTENSIONS_VERSION = 4.4.0 PYTHON_TYPING_EXTENSIONS_SOURCE = typing_extensions-$(PYTHON_TYPING_EXTENSIONS_VERSION).tar.gz -PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/9e/1d/d128169ff58c501059330f1ad96ed62b79114a2eb30b8238af63a2e27f70 +PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/e3/a7/8f4e456ef0adac43f452efc2d0e4b242ab831297f1bac60ac815d37eb9cf PYTHON_TYPING_EXTENSIONS_SETUP_TYPE = flit PYTHON_TYPING_EXTENSIONS_LICENSE = Python-2.0 PYTHON_TYPING_EXTENSIONS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:06 +0100 Subject: [Buildroot] [git commit] package/python-tinycss2: bump to version 1.2.1 Message-ID: <20221030140545.95D7787511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f50d96114ba5c039292653b3b519bcc3ab48fe2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-tinycss2/python-tinycss2.hash | 4 ++-- package/python-tinycss2/python-tinycss2.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-tinycss2/python-tinycss2.hash b/package/python-tinycss2/python-tinycss2.hash index e8e1d93f83..f9b638df6c 100644 --- a/package/python-tinycss2/python-tinycss2.hash +++ b/package/python-tinycss2/python-tinycss2.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/tinycss2/json -md5 60272f58f8d5834b2e09ffbc9bd5de53 tinycss2-1.1.1.tar.gz -sha256 b2e44dd8883c360c35dd0d1b5aad0b610e5156c2cb3b33434634e539ead9d8bf tinycss2-1.1.1.tar.gz +md5 e8a06102e7f42ca791463f11ce7b814d tinycss2-1.2.1.tar.gz +sha256 8cff3a8f066c2ec677c06dbc7b45619804a6938478d9d73c284b29d14ecb0627 tinycss2-1.2.1.tar.gz # Locally computed sha256 checksums sha256 6b94acee20ec9f2709333134f3ba70322535fb420af0ce8c1455d9cbe297f1d5 LICENSE diff --git a/package/python-tinycss2/python-tinycss2.mk b/package/python-tinycss2/python-tinycss2.mk index e4fc5dc9c5..de26639587 100644 --- a/package/python-tinycss2/python-tinycss2.mk +++ b/package/python-tinycss2/python-tinycss2.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TINYCSS2_VERSION = 1.1.1 +PYTHON_TINYCSS2_VERSION = 1.2.1 PYTHON_TINYCSS2_SOURCE = tinycss2-$(PYTHON_TINYCSS2_VERSION).tar.gz -PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/1e/5a/576828164b5486f319c4323915b915a8af3fa4a654bbb6f8fc8e87b5cb17 +PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/75/be/24179dfaa1d742c9365cbd0e3f0edc5d3aa3abad415a2327c5a6ff8ca077 PYTHON_TINYCSS2_SETUP_TYPE = flit PYTHON_TINYCSS2_LICENSE = BSD-3-Clause PYTHON_TINYCSS2_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:03 +0100 Subject: [Buildroot] [git commit] package/python-cssutils: bump to version 2.6.0 Message-ID: <20221030140545.81DA28750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32441017b56c2b9580c733834211716886c5fa6e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-cssutils/python-cssutils.hash | 4 ++-- package/python-cssutils/python-cssutils.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-cssutils/python-cssutils.hash b/package/python-cssutils/python-cssutils.hash index a3d2a6be6c..cb989131a3 100644 --- a/package/python-cssutils/python-cssutils.hash +++ b/package/python-cssutils/python-cssutils.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/cssutils/json -md5 974bf7f07d52f92dd29485b6e7529aac cssutils-2.5.1.tar.gz -sha256 b4a4da58e78326ec9f4a9d3555004ddf706f3e99f7a1026c1880f0934362b8b4 cssutils-2.5.1.tar.gz +md5 b01ea364e79eada181c3ae46d69249af cssutils-2.6.0.tar.gz +sha256 f7dcd23c1cec909fdf3630de346e1413b7b2555936dec14ba2ebb9913bf0818e cssutils-2.6.0.tar.gz # Locally computed sha256 checksums sha256 03c570a068086ee577dcd795519ea93462b2ed2fcb6dcc4dfce56a71a2fd6e5a COPYING.LESSER diff --git a/package/python-cssutils/python-cssutils.mk b/package/python-cssutils/python-cssutils.mk index 3acf26b3d5..fff9e393f3 100644 --- a/package/python-cssutils/python-cssutils.mk +++ b/package/python-cssutils/python-cssutils.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CSSUTILS_VERSION = 2.5.1 +PYTHON_CSSUTILS_VERSION = 2.6.0 PYTHON_CSSUTILS_SOURCE = cssutils-$(PYTHON_CSSUTILS_VERSION).tar.gz -PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/bd/f0/d3a02af54f292fe9d1f6bb18c7d2f79992b5cbae0db1ee91e5c73a3c7d7c +PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/43/d5/505d96b7456fd334f8b963c05bd9425dacd317e209bb9adf103613339325 PYTHON_CSSUTILS_LICENSE = LGPL-3.0+ PYTHON_CSSUTILS_LICENSE_FILES = COPYING.LESSER PYTHON_CSSUTILS_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:04 +0100 Subject: [Buildroot] [git commit] package/python-fonttools: bump to version 4.38.0 Message-ID: <20221030140545.8C00C87510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13f161aa19fac4c9046e353a5d174b773cae8dde branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-fonttools/python-fonttools.hash | 4 ++-- package/python-fonttools/python-fonttools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-fonttools/python-fonttools.hash b/package/python-fonttools/python-fonttools.hash index 58603f79a4..4b4751dc82 100644 --- a/package/python-fonttools/python-fonttools.hash +++ b/package/python-fonttools/python-fonttools.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/fonttools/json -md5 6cad81799e0491751cda0a98642b00eb fonttools-4.37.3.zip -sha256 f32ef6ec966cf0e7d2aa88601fed2e3a8f2851c26b5db2c80ccc8f82bee4eedc fonttools-4.37.3.zip +md5 f4775967d29b0da2f29ba499eed34f88 fonttools-4.38.0.zip +sha256 2bb244009f9bf3fa100fc3ead6aeb99febe5985fa20afbfbaa2f8946c2fbdaf1 fonttools-4.38.0.zip # Locally computed sha256 checksums sha256 6787208f83f659ccbc2223b2fde952ffa6f7e8aca62f1a8a2bf5bc51bb1b2383 LICENSE diff --git a/package/python-fonttools/python-fonttools.mk b/package/python-fonttools/python-fonttools.mk index aad1765899..d31d3a2889 100644 --- a/package/python-fonttools/python-fonttools.mk +++ b/package/python-fonttools/python-fonttools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FONTTOOLS_VERSION = 4.37.3 +PYTHON_FONTTOOLS_VERSION = 4.38.0 PYTHON_FONTTOOLS_SOURCE = fonttools-$(PYTHON_FONTTOOLS_VERSION).zip -PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/c1/0d/d41b9c2295e1896f4c89e6b213790eee8e8e641b3e9709518f2bddcdeffa +PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/55/5c/a4a25cf6db42d113d8f626901bb156b2f7cf7c7564a6bbc7b5cd6f7cb484 PYTHON_FONTTOOLS_SETUP_TYPE = setuptools PYTHON_FONTTOOLS_LICENSE = MIT PYTHON_FONTTOOLS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:58 +0100 Subject: [Buildroot] [git commit] package/python-aiofiles: bump to version 22.1.0 Message-ID: <20221030140545.59A5C8750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=987c27510f7949807e93ceb573b4d2ee00abb35c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiofiles/python-aiofiles.hash | 4 ++-- package/python-aiofiles/python-aiofiles.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiofiles/python-aiofiles.hash b/package/python-aiofiles/python-aiofiles.hash index 268136a406..d1594c3989 100644 --- a/package/python-aiofiles/python-aiofiles.hash +++ b/package/python-aiofiles/python-aiofiles.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiofiles/json -md5 697deeb4fdcb620c45f114f173ed7c0d aiofiles-0.8.0.tar.gz -sha256 8334f23235248a3b2e83b2c3a78a22674f39969b96397126cc93664d9a901e59 aiofiles-0.8.0.tar.gz +md5 b22db90039c881f6aa64431c6b23f30f aiofiles-22.1.0.tar.gz +sha256 9107f1ca0b2a5553987a94a3c9959fe5b491fdf731389aa5b7b1bd0733e32de6 aiofiles-22.1.0.tar.gz # Locally computed sha256 checksums sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-aiofiles/python-aiofiles.mk b/package/python-aiofiles/python-aiofiles.mk index 996e5eb6c0..b65d2cfa82 100644 --- a/package/python-aiofiles/python-aiofiles.mk +++ b/package/python-aiofiles/python-aiofiles.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOFILES_VERSION = 0.8.0 +PYTHON_AIOFILES_VERSION = 22.1.0 PYTHON_AIOFILES_SOURCE = aiofiles-$(PYTHON_AIOFILES_VERSION).tar.gz -PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/10/ca/c416cfacf6a47e1400dad56eab85aa86c92c6fbe58447d12035e434f0d5c +PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/86/26/6e5060a159a6131c430e8a01ec8327405a19a449a506224b394e36f2ebc9 PYTHON_AIOFILES_SETUP_TYPE = setuptools PYTHON_AIOFILES_LICENSE = Apache-2.0 PYTHON_AIOFILES_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:10 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-aiohttp-session: bump to version 2.12.0 In-Reply-To: <20221029000437.1305667-1-james.hilliard1@gmail.com> References: <20221029000437.1305667-1-james.hilliard1@gmail.com> Message-ID: <20221030150610.45389260@windsurf> On Fri, 28 Oct 2022 18:04:37 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- > package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:15 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-typing-extensions: bump to version 4.4.0 In-Reply-To: <20221029001917.1312839-1-james.hilliard1@gmail.com> References: <20221029001917.1312839-1-james.hilliard1@gmail.com> Message-ID: <20221030150615.40fb7516@windsurf> On Fri, 28 Oct 2022 18:19:17 -0600 James Hilliard wrote: > License hash changed due to date/formatting updates: > https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f > > Signed-off-by: James Hilliard > --- > .../python-typing-extensions/python-typing-extensions.hash | 6 +++--- > .../python-typing-extensions/python-typing-extensions.mk | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-ujson: bump to version 5.5.0 In-Reply-To: <20221029010036.1388698-1-james.hilliard1@gmail.com> References: <20221029010036.1388698-1-james.hilliard1@gmail.com> Message-ID: <20221030150621.153d0e8c@windsurf> On Fri, 28 Oct 2022 19:00:36 -0600 James Hilliard wrote: > Switch to now supported system double-conversion library. > > Disable built in strip so that stripping is handled by buildroot. > > Signed-off-by: James Hilliard > --- > package/python-ujson/Config.in | 3 ++- > package/python-ujson/python-ujson.hash | 4 ++-- > package/python-ujson/python-ujson.mk | 10 +++++++--- > 3 files changed, 11 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:27 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-weasyprint: bump to version 57.0 In-Reply-To: <20221029010612.1391444-1-james.hilliard1@gmail.com> References: <20221029010612.1391444-1-james.hilliard1@gmail.com> Message-ID: <20221030150627.6336eb1e@windsurf> On Fri, 28 Oct 2022 19:06:12 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-weasyprint/python-weasyprint.hash | 4 ++-- > package/python-weasyprint/python-weasyprint.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pydyf: bump to version 0.5.0 In-Reply-To: <20221029011039.1393998-1-james.hilliard1@gmail.com> References: <20221029011039.1393998-1-james.hilliard1@gmail.com> Message-ID: <20221030150632.1241e9ea@windsurf> On Fri, 28 Oct 2022 19:10:39 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-pydyf/python-pydyf.hash | 4 ++-- > package/python-pydyf/python-pydyf.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:37 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:37 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-aiofiles: bump to version 22.1.0 In-Reply-To: <20221029011424.1394984-1-james.hilliard1@gmail.com> References: <20221029011424.1394984-1-james.hilliard1@gmail.com> Message-ID: <20221030150637.270c7260@windsurf> On Fri, 28 Oct 2022 19:14:24 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-aiofiles/python-aiofiles.hash | 4 ++-- > package/python-aiofiles/python-aiofiles.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-attrs: bump to version 22.1.0 In-Reply-To: <20221029012020.1396608-1-james.hilliard1@gmail.com> References: <20221029012020.1396608-1-james.hilliard1@gmail.com> Message-ID: <20221030150642.55d8d801@windsurf> On Fri, 28 Oct 2022 19:20:20 -0600 James Hilliard wrote: > License hash changed due to ownership clarification: > https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 > > Signed-off-by: James Hilliard > --- > package/python-attrs/python-attrs.hash | 6 +++--- > package/python-attrs/python-attrs.mk | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-certifi: bump to version 2022.9.24 In-Reply-To: <20221029012321.1398031-1-james.hilliard1@gmail.com> References: <20221029012321.1398031-1-james.hilliard1@gmail.com> Message-ID: <20221030150647.339a2e18@windsurf> On Fri, 28 Oct 2022 19:23:21 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-certifi/python-certifi.hash | 4 ++-- > package/python-certifi/python-certifi.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:54 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-charset-normalizer: bump to version 3.0.0 In-Reply-To: <20221029012704.1399837-1-james.hilliard1@gmail.com> References: <20221029012704.1399837-1-james.hilliard1@gmail.com> Message-ID: <20221030150654.24260b34@windsurf> On Fri, 28 Oct 2022 19:27:04 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > .../python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- > .../python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:04 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-cssutils: bump to version 2.6.0 In-Reply-To: <20221029013321.1403408-1-james.hilliard1@gmail.com> References: <20221029013321.1403408-1-james.hilliard1@gmail.com> Message-ID: <20221030150704.77779645@windsurf> On Fri, 28 Oct 2022 19:33:21 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-cssutils/python-cssutils.hash | 4 ++-- > package/python-cssutils/python-cssutils.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:11 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-fonttools: bump to version 4.38.0 In-Reply-To: <20221029013717.1406350-1-james.hilliard1@gmail.com> References: <20221029013717.1406350-1-james.hilliard1@gmail.com> Message-ID: <20221030150711.088541ee@windsurf> On Fri, 28 Oct 2022 19:37:17 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-fonttools/python-fonttools.hash | 4 ++-- > package/python-fonttools/python-fonttools.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-tinycss2: bump to version 1.2.1 In-Reply-To: <20221029014217.1408835-1-james.hilliard1@gmail.com> References: <20221029014217.1408835-1-james.hilliard1@gmail.com> Message-ID: <20221030150717.07a75acd@windsurf> On Fri, 28 Oct 2022 19:42:17 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-tinycss2/python-tinycss2.hash | 4 ++-- > package/python-tinycss2/python-tinycss2.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:09:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:09:07 +0100 Subject: [Buildroot] [git commit] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 Message-ID: <20221030140917.DDC7B87515@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=abf2593ead935d07d7d2eaad2a74a4f31f59012a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Let's also drop local patch in favor of the upstream pending patch we already use for package rtl8189es to deal with endianness. Fixes: http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ .../0001-Makefile-remove-default-endianness.patch | 30 ---------------- package/rtl8189fs/rtl8189fs.hash | 2 +- package/rtl8189fs/rtl8189fs.mk | 9 +++-- 4 files changed, 48 insertions(+), 33 deletions(-) diff --git a/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch b/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch deleted file mode 100644 index 47e42415eb..0000000000 --- a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 480d9da302885d9e8b3d1f9c68def569e3c8a8c0 Mon Sep 17 00:00:00 2001 -From: Sergey Matyukevich -Date: Mon, 9 May 2022 00:17:21 +0300 -Subject: [PATCH] Makefile: remove default endianness - -There is no way to remove configuration options from EXTRA_CFLAGS -without editing Makefile. So default LE configuration can not be -conveniently replaced by BE. Remove default endianness from the -Makefile to enable its configuration via USER_EXTRA_CFLAGS. - -Signed-off-by: Sergey Matyukevich ---- - Makefile | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/Makefile b/Makefile -index dfca305..fde4e6b 100644 ---- a/Makefile -+++ b/Makefile -@@ -22,7 +22,6 @@ endif - - EXTRA_CFLAGS += -I$(src)/include - --EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN - EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT - - EXTRA_LDFLAGS += --strip-debug --- -2.35.1 - diff --git a/package/rtl8189fs/rtl8189fs.hash b/package/rtl8189fs/rtl8189fs.hash index d5d18a8ba8..1ab41db553 100644 --- a/package/rtl8189fs/rtl8189fs.hash +++ b/package/rtl8189fs/rtl8189fs.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 41eee18d8a4289c2eac07af3224c62214a9b694a717bf497cd34a95b955f3d49 rtl8189fs-94a61cbf46ce87b7c9b8aa53123aeb142133a3c9.tar.gz +sha256 7cc80cb85ed6e7f7d5480e6094c377d3dbcd18a57b58cfba43a7e42ea59fc8d3 rtl8189fs-c93cfd712a3acd2ecdeda19a66d269c20f8803f1.tar.gz diff --git a/package/rtl8189fs/rtl8189fs.mk b/package/rtl8189fs/rtl8189fs.mk index 1c398919ba..8b7618fcc8 100644 --- a/package/rtl8189fs/rtl8189fs.mk +++ b/package/rtl8189fs/rtl8189fs.mk @@ -4,15 +4,20 @@ # ################################################################################ -RTL8189FS_VERSION = 94a61cbf46ce87b7c9b8aa53123aeb142133a3c9 +RTL8189FS_VERSION = c93cfd712a3acd2ecdeda19a66d269c20f8803f1 RTL8189FS_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189FS_VERSION)) RTL8189FS_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189FS_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189FS_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189FS_MODULE_MAKE_OPTS = \ CONFIG_RTL8189FS=m \ KVER=$(LINUX_VERSION_PROBED) \ KSRC=$(LINUX_DIR) \ - USER_EXTRA_CFLAGS="-DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN" + USER_EXTRA_CFLAGS="$(RTL8189FS_USER_EXTRA_CLAGS)" define RTL8189FS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) From thomas.petazzoni at bootlin.com Sun Oct 30 14:09:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:09:21 +0100 Subject: [Buildroot] [PATCH] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> References: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030150921.3058ea4f@windsurf> On Mon, 17 Oct 2022 22:38:28 +0200 Giulio Benetti wrote: > Let's also drop local patch in favor of the upstream pending patch we > already use for package rtl8189es to deal with endianness. > > Fixes: > http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ > > Signed-off-by: Giulio Benetti > --- > ...TRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 +++++++++++++++++++ > ...1-Makefile-remove-default-endianness.patch | 30 -------------- > package/rtl8189fs/rtl8189fs.hash | 2 +- > package/rtl8189fs/rtl8189fs.mk | 9 ++++- > 4 files changed, 48 insertions(+), 33 deletions(-) > create mode 100644 package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch > delete mode 100644 package/rtl8189fs/0001-Makefile-remove-default-endianness.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From paguilar at paguilar.org Sun Oct 30 15:50:32 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sun, 30 Oct 2022 16:50:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030155032.197144-1-paguilar@paguilar.org> Signed-off-by: Pedro Aguilar --- package/bdwgc/bdwgc.hash | 2 +- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..ca094549c9 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES -- 2.34.1 From peter at korsgaard.com Sun Oct 30 15:56:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/mongoose: bump to version 7.8 In-Reply-To: <20221030131718.422677-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:17:18 +0100") References: <20221030131718.422677-1-fontaine.fabrice@gmail.com> Message-ID: <8735b5wbio.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Update hash of license file (date and URL updated with > https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 > https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) > https://github.com/cesanta/mongoose/releases/tag/7.8 > https://github.com/cesanta/mongoose/releases/tag/7.7 > https://github.com/cesanta/mongoose/releases/tag/7.6 > https://github.com/cesanta/mongoose/releases/tag/7.5 > https://github.com/cesanta/mongoose/releases/tag/7.4 > https://github.com/cesanta/mongoose/releases/tag/7.3 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/matio: bump to version 1.5.23 In-Reply-To: <20221030130723.408004-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:07:23 +0100") References: <20221030130723.408004-1-fontaine.fabrice@gmail.com> Message-ID: <87y1sxuwxs.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/tbeu/matio/releases/tag/v1.5.23 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/mcelog: bump to version 189 In-Reply-To: <20221030131048.410237-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:10:48 +0100") References: <20221030131048.410237-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3luwxm.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/andikleen/mcelog/releases/tag/v189 > https://github.com/andikleen/mcelog/releases/tag/v188 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:57:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:57:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/mbuffer: bump to version 20220418 In-Reply-To: <20221030130144.399291-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:01:44 +0100") References: <20221030130144.399291-1-fontaine.fabrice@gmail.com> Message-ID: <87pme9uwww.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:00 +0100 Subject: [Buildroot] [git commit] package/mcelog: bump to version 189 Message-ID: <20221030155749.1623987538@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8d0c70370c48c3cc12baee1e572948c73e13cb4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/andikleen/mcelog/releases/tag/v189 https://github.com/andikleen/mcelog/releases/tag/v188 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mcelog/mcelog.hash | 2 +- package/mcelog/mcelog.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mcelog/mcelog.hash b/package/mcelog/mcelog.hash index c64e652453..e0350b085d 100644 --- a/package/mcelog/mcelog.hash +++ b/package/mcelog/mcelog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 02eb3f4cb0976048f191d124fb45a1720caf082cd246d858acb0a39a9d026641 mcelog-187.tar.gz +sha256 30364d134ff416f3f9469720add84bdccea226268d334f06022110f484550cd9 mcelog-189.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/mcelog/mcelog.mk b/package/mcelog/mcelog.mk index de1b76cfd3..8b5876d32e 100644 --- a/package/mcelog/mcelog.mk +++ b/package/mcelog/mcelog.mk @@ -4,7 +4,7 @@ # ################################################################################ -MCELOG_VERSION = 187 +MCELOG_VERSION = 189 MCELOG_SITE = $(call github,andikleen,mcelog,v$(MCELOG_VERSION)) MCELOG_LICENSE = GPL-2.0 MCELOG_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 30 15:56:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:07 +0100 Subject: [Buildroot] [git commit] package/mongoose: bump to version 7.8 Message-ID: <20221030155749.1F90487539@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f9e51e1150f59962577358b3da5c390ca4749291 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of license file (date and URL updated with https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) https://github.com/cesanta/mongoose/releases/tag/7.8 https://github.com/cesanta/mongoose/releases/tag/7.7 https://github.com/cesanta/mongoose/releases/tag/7.6 https://github.com/cesanta/mongoose/releases/tag/7.5 https://github.com/cesanta/mongoose/releases/tag/7.4 https://github.com/cesanta/mongoose/releases/tag/7.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mongoose/mongoose.hash | 4 ++-- package/mongoose/mongoose.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mongoose/mongoose.hash b/package/mongoose/mongoose.hash index 809f160cf0..ffef9f446c 100644 --- a/package/mongoose/mongoose.hash +++ b/package/mongoose/mongoose.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8c5024a4e5b5a0c7fdae3c24ebc68e2b3ccfaba08cf25c2e76fc7f14f92fd4a5 mongoose-7.2.tar.gz -sha256 9553d057f2ba980642f2c18d87ed38896cff1c9612d77d684a73a11fe1443b05 LICENSE +sha256 55073dcd427ab9475731ad855e417884f4fbfb24b7d5694f6cabadbee1329f16 mongoose-7.8.tar.gz +sha256 b41c293820074278291813af9f181918154875c94d744a90bf4eec331be28ac5 LICENSE diff --git a/package/mongoose/mongoose.mk b/package/mongoose/mongoose.mk index 2c5df1d0cc..8d06ed4689 100644 --- a/package/mongoose/mongoose.mk +++ b/package/mongoose/mongoose.mk @@ -4,7 +4,7 @@ # ################################################################################ -MONGOOSE_VERSION = 7.2 +MONGOOSE_VERSION = 7.8 MONGOOSE_SITE = $(call github,cesanta,mongoose,$(MONGOOSE_VERSION)) MONGOOSE_LICENSE = GPL-2.0 MONGOOSE_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 30 15:57:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:57:10 +0100 Subject: [Buildroot] [git commit] package/mbuffer: bump to version 20220418 Message-ID: <20221030155749.35F8D8753B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a6e7d5c2ca091372a759bad60e6a7d8064d05234 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mbuffer/mbuffer.hash | 4 ++-- package/mbuffer/mbuffer.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mbuffer/mbuffer.hash b/package/mbuffer/mbuffer.hash index bab568d1d8..8f7b8dd07b 100644 --- a/package/mbuffer/mbuffer.hash +++ b/package/mbuffer/mbuffer.hash @@ -1,8 +1,8 @@ # From http://www.maier-komor.de/mbuffer.html -md5 b6787260112e3ac416c0febdb097caa8 mbuffer-20211018.tgz +md5 90e183efeec2812e2413e97b65600acc mbuffer-20220418.tgz # Locally computed after checking signature upstream -sha256 e240c1e4e4ac14c28be8c660ec47d44ce16b1e8ec92aa907ad13004ffd5db6e3 mbuffer-20211018.tgz +sha256 6e5801f9f5ff11445d1d03028b5a03cd08af5408697b7f94c427833228a300c7 mbuffer-20220418.tgz # Hash for license file sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/mbuffer/mbuffer.mk b/package/mbuffer/mbuffer.mk index bbf27579f1..6381d97e8a 100644 --- a/package/mbuffer/mbuffer.mk +++ b/package/mbuffer/mbuffer.mk @@ -4,7 +4,7 @@ # ################################################################################ -MBUFFER_VERSION = 20211018 +MBUFFER_VERSION = 20220418 MBUFFER_SOURCE = mbuffer-$(MBUFFER_VERSION).tgz MBUFFER_SITE = http://www.maier-komor.de/software/mbuffer MBUFFER_LICENSE = GPL-3.0+ From peter at korsgaard.com Sun Oct 30 15:56:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:26 +0100 Subject: [Buildroot] [git commit] package/matio: bump to version 1.5.23 Message-ID: <20221030155749.2ADB68753A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bed463a46f2b1949f66947b5cf1caa04ce9b6f0f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/tbeu/matio/releases/tag/v1.5.23 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/matio/matio.hash | 4 ++-- package/matio/matio.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/matio/matio.hash b/package/matio/matio.hash index 4634074ca0..94e0e48f69 100644 --- a/package/matio/matio.hash +++ b/package/matio/matio.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/projects/matio/files/matio/1.5.22/ -sha512 33fd3991413e94dfc9aba13ffd08b09ddcbdb9dfa579124d981449e195a8c61a3dc95b55e46bba360d48456c117cf36403af1c3448689c26b8aea5fa9cf38323 matio-1.5.22.tar.gz +# From https://sourceforge.net/projects/matio/files/matio/1.5.23/ +sha512 e125278dcb25695affb7c576d0e2a86c0eff4225aa866b81536c9e4d7b2aea2c554f5389e96d534a8b559f5554b6cbecff4b44fe8915173cd64b2da6d1dc2629 matio-1.5.23.tar.gz # Locally computed sha256 3ed9a50d754fcc92d4accb8448e397eafeab686796b2a7445557ce782806e239 COPYING diff --git a/package/matio/matio.mk b/package/matio/matio.mk index d282852d37..5e09f4e6ce 100644 --- a/package/matio/matio.mk +++ b/package/matio/matio.mk @@ -4,7 +4,7 @@ # ################################################################################ -MATIO_VERSION = 1.5.22 +MATIO_VERSION = 1.5.23 MATIO_SITE = http://downloads.sourceforge.net/project/matio/matio/$(MATIO_VERSION) MATIO_LICENSE = BSD-2-Clause MATIO_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sun Oct 30 16:02:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:02:57 +0100 Subject: [Buildroot] [git commit] package/brltty: fix infinite loop in configure Message-ID: <20221030160315.7624A8753E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=241db490b703fc734f0e8719a07d0f9ff40faaba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport a patch to fix an infinite loop bug in configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...gue-runProgramTerminationCommands-used-a-.patch | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch new file mode 100644 index 0000000000..0f81254e08 --- /dev/null +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch @@ -0,0 +1,29 @@ +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 +From: Dave Mielke +Date: Sat, 15 Oct 2022 15:20:38 -0400 +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash + command. (dm) + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] +--- + brltty-prologue.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..6d1faf983 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { + while [ "${programTerminationCommandCount}" -gt 0 ] + do + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) + + local process="${1}" + local directory="${2}" +-- +2.34.1 + From yann.morin.1998 at free.fr Sun Oct 30 16:03:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:03:39 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/brltty: fix infinite loop in configure In-Reply-To: <20221015210940.4002212-1-james.hilliard1@gmail.com> References: <20221015210940.4002212-1-james.hilliard1@gmail.com> Message-ID: <20221030160339.GG1058960@scaer> James, All, On 2022-10-15 15:09 -0600, James Hilliard spake thusly: > Backport a patch to fix an infinite loop bug in configure. > > Fixes: > - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 > - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 > - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 > > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > Changes v1 -> v2: > - backport patch instead of revert > --- > ...unProgramTerminationCommands-used-a-.patch | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > > diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > new file mode 100644 > index 0000000000..0f81254e08 > --- /dev/null > +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > @@ -0,0 +1,29 @@ > +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 > +From: Dave Mielke > +Date: Sat, 15 Oct 2022 15:20:38 -0400 > +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash > + command. (dm) > + > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] > +--- > + brltty-prologue.sh | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/brltty-prologue.sh b/brltty-prologue.sh > +index 05b817742..6d1faf983 100644 > +--- a/brltty-prologue.sh > ++++ b/brltty-prologue.sh > +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { > + while [ "${programTerminationCommandCount}" -gt 0 ] > + do > + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") > +- let "programTerminationCommandCount -= 1" > ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) > + > + local process="${1}" > + local directory="${2}" > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:10:04 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:04 +0100 Subject: [Buildroot] [git commit] package/libdrm: bump version to 2.4.113 Message-ID: <20221030161421.5DB3887571@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce8eb37a7ea0a13644fe9ec29bf8ce72df094386 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch various configure options from true/false to enabled/disabled due to upstream commits: https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/libdrm/libdrm.hash | 6 +++--- package/libdrm/libdrm.mk | 54 +++++++++++++++++++++++----------------------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash index 082a158074..a47e169bed 100644 --- a/package/libdrm/libdrm.hash +++ b/package/libdrm/libdrm.hash @@ -1,6 +1,6 @@ -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz # Hash for license file sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk index 79d9416ef0..34bd678c5a 100644 --- a/package/libdrm/libdrm.mk +++ b/package/libdrm/libdrm.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDRM_VERSION = 2.4.112 +LIBDRM_VERSION = 2.4.113 LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz LIBDRM_SITE = https://dri.freedesktop.org/libdrm LIBDRM_LICENSE = MIT @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ host-pkgconf LIBDRM_CONF_OPTS = \ - -Dcairo-tests=false \ - -Dman-pages=false + -Dcairo-tests=disabled \ + -Dman-pages=disabled ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) LIBDRM_DEPENDENCIES += libatomic_ops @@ -27,70 +27,70 @@ endif endif ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) -LIBDRM_CONF_OPTS += -Dintel=true +LIBDRM_CONF_OPTS += -Dintel=enabled LIBDRM_DEPENDENCIES += libpciaccess else -LIBDRM_CONF_OPTS += -Dintel=false +LIBDRM_CONF_OPTS += -Dintel=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) -LIBDRM_CONF_OPTS += -Dradeon=true +LIBDRM_CONF_OPTS += -Dradeon=enabled else -LIBDRM_CONF_OPTS += -Dradeon=false +LIBDRM_CONF_OPTS += -Dradeon=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) -LIBDRM_CONF_OPTS += -Damdgpu=true +LIBDRM_CONF_OPTS += -Damdgpu=enabled else -LIBDRM_CONF_OPTS += -Damdgpu=false +LIBDRM_CONF_OPTS += -Damdgpu=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) -LIBDRM_CONF_OPTS += -Dnouveau=true +LIBDRM_CONF_OPTS += -Dnouveau=enabled else -LIBDRM_CONF_OPTS += -Dnouveau=false +LIBDRM_CONF_OPTS += -Dnouveau=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) -LIBDRM_CONF_OPTS += -Dvmwgfx=true +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled else -LIBDRM_CONF_OPTS += -Dvmwgfx=false +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) -LIBDRM_CONF_OPTS += -Domap=true +LIBDRM_CONF_OPTS += -Domap=enabled else -LIBDRM_CONF_OPTS += -Domap=false +LIBDRM_CONF_OPTS += -Domap=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) -LIBDRM_CONF_OPTS += -Detnaviv=true +LIBDRM_CONF_OPTS += -Detnaviv=enabled else -LIBDRM_CONF_OPTS += -Detnaviv=false +LIBDRM_CONF_OPTS += -Detnaviv=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) -LIBDRM_CONF_OPTS += -Dexynos=true +LIBDRM_CONF_OPTS += -Dexynos=enabled else -LIBDRM_CONF_OPTS += -Dexynos=false +LIBDRM_CONF_OPTS += -Dexynos=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) -LIBDRM_CONF_OPTS += -Dfreedreno=true +LIBDRM_CONF_OPTS += -Dfreedreno=enabled else -LIBDRM_CONF_OPTS += -Dfreedreno=false +LIBDRM_CONF_OPTS += -Dfreedreno=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) -LIBDRM_CONF_OPTS += -Dtegra=true +LIBDRM_CONF_OPTS += -Dtegra=enabled else -LIBDRM_CONF_OPTS += -Dtegra=false +LIBDRM_CONF_OPTS += -Dtegra=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) -LIBDRM_CONF_OPTS += -Dvc4=true +LIBDRM_CONF_OPTS += -Dvc4=enabled else -LIBDRM_CONF_OPTS += -Dvc4=false +LIBDRM_CONF_OPTS += -Dvc4=disabled endif ifeq ($(BR2_PACKAGE_HAS_UDEV),y) @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false endif ifeq ($(BR2_PACKAGE_VALGRIND),y) -LIBDRM_CONF_OPTS += -Dvalgrind=true +LIBDRM_CONF_OPTS += -Dvalgrind=enabled LIBDRM_DEPENDENCIES += valgrind else -LIBDRM_CONF_OPTS += -Dvalgrind=false +LIBDRM_CONF_OPTS += -Dvalgrind=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) From yann.morin.1998 at free.fr Sun Oct 30 16:10:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:56 +0100 Subject: [Buildroot] [git commit] package/smartmontools: bump to version 7.3 Message-ID: <20221030161421.7F76687575@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e60fb6d252d5ece448a70957ab45389b151f7f79 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/smartmontools/smartmontools.hash | 8 ++++---- package/smartmontools/smartmontools.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash index 3c5535b29a..e48e955d01 100644 --- a/package/smartmontools/smartmontools.hash +++ b/package/smartmontools/smartmontools.hash @@ -1,7 +1,7 @@ -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz # Locally computed -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk index 2e2bbcd4e2..d24f008df4 100644 --- a/package/smartmontools/smartmontools.mk +++ b/package/smartmontools/smartmontools.mk @@ -4,7 +4,7 @@ # ################################################################################ -SMARTMONTOOLS_VERSION = 7.2 +SMARTMONTOOLS_VERSION = 7.3 SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) SMARTMONTOOLS_LICENSE = GPL-2.0+ SMARTMONTOOLS_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sun Oct 30 16:11:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:11:00 +0100 Subject: [Buildroot] [git commit] package/qlibc: bump to version 2.4.7 Message-ID: <20221030161421.9597F87572@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=277e1250a6a000911ab463296dbb29e2e53514c4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/qlibc/qlibc.hash | 2 +- package/qlibc/qlibc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash index 5cd6e1860f..9b2af1a4e3 100644 --- a/package/qlibc/qlibc.hash +++ b/package/qlibc/qlibc.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk index 3996bb3706..838ba68746 100644 --- a/package/qlibc/qlibc.mk +++ b/package/qlibc/qlibc.mk @@ -4,7 +4,7 @@ # ################################################################################ -QLIBC_VERSION = 2.4.6 +QLIBC_VERSION = 2.4.7 QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) QLIBC_LICENSE = BSD-2-Clause QLIBC_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Sun Oct 30 16:10:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:43 +0100 Subject: [Buildroot] [git commit] package/sngrep: bump to version 1.6.0 Message-ID: <20221030161421.75FDB87573@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69c9cc60a10a114b49830134ac2ad5f136bd057f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - pcre2 is an optional dependency since https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc - zlib is an optional dependency since https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...e_openssl.h-fix-build-with-libressl-3.5.0.patch | 40 ---------------------- package/sngrep/sngrep.hash | 6 ++-- package/sngrep/sngrep.mk | 21 +++++++++--- 3 files changed, 19 insertions(+), 48 deletions(-) diff --git a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch b/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch deleted file mode 100644 index 7dbb29ab00..0000000000 --- a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 29 Apr 2022 18:53:45 +0200 -Subject: [PATCH] src/capture_openssl.h: fix build with libressl >= 3.5.0 - -Fix the following build failure with libressl >= 3.5.0: - -capture_openssl.c: In function 'P_hash': -capture_openssl.c:101:18: error: storage size of 'hm' isn't known - 101 | HMAC_CTX hm; - | ^~ - -Fixes: - - http://autobuild.buildroot.org/results/f1e8cdb3ac35a30055ab79d41e6cc038e5339c37 - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/irontec/sngrep/commit/4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761] ---- - src/capture_openssl.h | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/src/capture_openssl.h b/src/capture_openssl.h -index 780de494..1f87a5cd 100644 ---- a/src/capture_openssl.h -+++ b/src/capture_openssl.h -@@ -67,10 +67,11 @@ - #endif - - /* LibreSSL declares OPENSSL_VERSION_NUMBER == 2.0 but does not include most -- * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) -+ * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) until -+ * version 3.5.0 - */ - #if defined(LIBRESSL_VERSION_NUMBER) --#define MODSSL_USE_OPENSSL_PRE_1_1_API (1) -+#define MODSSL_USE_OPENSSL_PRE_1_1_API (LIBRESSL_VERSION_NUMBER < 0x30500000L) - #else - #define MODSSL_USE_OPENSSL_PRE_1_1_API (OPENSSL_VERSION_NUMBER < 0x10100000L) - #endif diff --git a/package/sngrep/sngrep.hash b/package/sngrep/sngrep.hash index 33fa91ef5e..60a32022e6 100644 --- a/package/sngrep/sngrep.hash +++ b/package/sngrep/sngrep.hash @@ -1,6 +1,6 @@ -# From https://github.com/irontec/sngrep/releases/download/v1.4.7/sngrep-1.4.7.tar.gz.md5sum -md5 78fe753e24f36ddaf627bc2b734f45ba sngrep-1.4.7.tar.gz +# From https://github.com/irontec/sngrep/releases/download/v1.6.0/sngrep-1.6.0.tar.gz.md5sum +md5 1519ca6cd1167c0722debfb96e2ac173 sngrep-1.6.0.tar.gz # Locally computed -sha256 3c96aadd8b8c6b7adb5552d6fb4234f2000f15109b0f6c5feb632c81306cc49b sngrep-1.4.7.tar.gz +sha256 fd80964d6560f2ff57b4f5bef2353d1a6f7c48d2f1a5f0a167c854bd2e801999 sngrep-1.6.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk index 841a7bb991..eedb99492f 100644 --- a/package/sngrep/sngrep.mk +++ b/package/sngrep/sngrep.mk @@ -4,8 +4,9 @@ # ################################################################################ -SNGREP_VERSION = 1.4.7 -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) +SNGREP_VERSION = 1.6.0 +SNGREP_SITE = \ + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) SNGREP_LICENSE = GPL-3.0+ SNGREP_LICENSE_FILES = LICENSE SNGREP_AUTORECONF = YES @@ -29,11 +30,21 @@ else SNGREP_CONF_OPTS += --without-gnutls --without-openssl endif -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) +SNGREP_DEPENDENCIES += pcre2 +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 +else ifeq ($(BR2_PACKAGE_PCRE),y) SNGREP_DEPENDENCIES += pcre -SNGREP_CONF_OPTS += --with-pcre +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 else -SNGREP_CONF_OPTS += --without-pcre +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 +endif + +ifeq ($(BR2_PACKAGE_ZLIB),y) +SNGREP_DEPENDENCIES += zlib +SNGREP_CONF_OPTS += --with-zlib +else +SNGREP_CONF_OPTS += --without-zlib endif $(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 16:10:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:06 +0100 Subject: [Buildroot] [git commit] package/slang: bump to version 2.3.3 Message-ID: <20221030161421.689C587572@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e0f40892e921dc06e89ff543df754e434b608633 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Refresh patch http://lists.jedsoft.org/lists/slang-users/2022/0000005.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/slang/0001-slsh-libs.patch | 6 ++++-- package/slang/slang.hash | 4 ++-- package/slang/slang.mk | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch index 211cb4a0e0..fad16d1b2f 100644 --- a/package/slang/0001-slsh-libs.patch +++ b/package/slang/0001-slsh-libs.patch @@ -5,6 +5,8 @@ probably Diego Petten??. Signed-off-by: Gustavo Zacarias [Bernd: rebased against 2.3.1a] Signed-off-by: Bernd Kuhls +[Fabrice: rebased against 2.3.3] +Signed-off-by: Fabrice Fontaine --- a/slsh/Makefile.in +++ b/slsh/Makefile.in @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile diff --git a/package/slang/slang.hash b/package/slang/slang.hash index 3e211ab548..563117b48a 100644 --- a/package/slang/slang.hash +++ b/package/slang/slang.hash @@ -1,6 +1,6 @@ # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 # License file, locally computed sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING diff --git a/package/slang/slang.mk b/package/slang/slang.mk index 44a0148088..e0f5968b46 100644 --- a/package/slang/slang.mk +++ b/package/slang/slang.mk @@ -4,7 +4,7 @@ # ################################################################################ -SLANG_VERSION = 2.3.2 +SLANG_VERSION = 2.3.3 SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 SLANG_SITE = http://www.jedsoft.org/releases/slang SLANG_LICENSE = GPL-2.0+ From yann.morin.1998 at free.fr Sun Oct 30 16:10:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:58 +0100 Subject: [Buildroot] [git commit] package/taglib: bump to version 1.13 Message-ID: <20221030161421.8A85D87571@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5ef22cb6d10958a9867fc372725826819a8824ef branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Use WITH_ZLIB which is available since https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e https://github.com/taglib/taglib/releases/tag/v1.13 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...latile-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ---------------------- package/taglib/taglib.hash | 2 +- package/taglib/taglib.mk | 5 +++- 3 files changed, 5 insertions(+), 36 deletions(-) diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch deleted file mode 100644 index d8af73cb08..0000000000 --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 -From: Oleg Antonyan -Date: Thu, 13 May 2021 16:41:35 +0200 -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= - =?UTF-8?q?=201.12=20(#1012)?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -* fix error: duplicate volatile - -* fix volatile ATOMIC_INT in constructor - -[Retrieved from: -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] -Signed-off-by: Fabrice Fontaine ---- - taglib/toolkit/trefcounter.cpp | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp -index 18cb596c0..5b089abf9 100644 ---- a/taglib/toolkit/trefcounter.cpp -+++ b/taglib/toolkit/trefcounter.cpp -@@ -52,7 +52,7 @@ - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) - #else --# define ATOMIC_INT volatile int -+# define ATOMIC_INT int - # define ATOMIC_INC(x) (++x) - # define ATOMIC_DEC(x) (--x) - #endif diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash index 38a44b41a5..7d1b2e8422 100644 --- a/package/taglib/taglib.hash +++ b/package/taglib/taglib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk index 9513e0d0e1..c687891002 100644 --- a/package/taglib/taglib.mk +++ b/package/taglib/taglib.mk @@ -4,7 +4,7 @@ # ################################################################################ -TAGLIB_VERSION = 1.12 +TAGLIB_VERSION = 1.13 TAGLIB_SITE = http://taglib.github.io/releases TAGLIB_INSTALL_STAGING = YES TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib ifeq ($(BR2_PACKAGE_ZLIB),y) TAGLIB_DEPENDENCIES += zlib +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON +else +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF endif define TAGLIB_REMOVE_DEVFILE From yann.morin.1998 at free.fr Sun Oct 30 16:14:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:14:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/libdrm: bump version to 2.4.113 In-Reply-To: <20221028203342.210288-1-bernd.kuhls@t-online.de> References: <20221028203342.210288-1-bernd.kuhls@t-online.de> Message-ID: <20221030161442.GH1058960@scaer> Bernd, All, On 2022-10-28 22:33 +0200, Bernd Kuhls spake thusly: > Switch various configure options from true/false to enabled/disabled > due to upstream commits: > https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 > https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libdrm/libdrm.hash | 6 ++--- > package/libdrm/libdrm.mk | 54 +++++++++++++++++++------------------- > 2 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash > index 082a158074..a47e169bed 100644 > --- a/package/libdrm/libdrm.hash > +++ b/package/libdrm/libdrm.hash > @@ -1,6 +1,6 @@ > -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html > -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz > -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz > +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html > +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz > +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz > > # Hash for license file > sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build > diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk > index 79d9416ef0..34bd678c5a 100644 > --- a/package/libdrm/libdrm.mk > +++ b/package/libdrm/libdrm.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LIBDRM_VERSION = 2.4.112 > +LIBDRM_VERSION = 2.4.113 > LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz > LIBDRM_SITE = https://dri.freedesktop.org/libdrm > LIBDRM_LICENSE = MIT > @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ > host-pkgconf > > LIBDRM_CONF_OPTS = \ > - -Dcairo-tests=false \ > - -Dman-pages=false > + -Dcairo-tests=disabled \ > + -Dman-pages=disabled > > ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) > LIBDRM_DEPENDENCIES += libatomic_ops > @@ -27,70 +27,70 @@ endif > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) > -LIBDRM_CONF_OPTS += -Dintel=true > +LIBDRM_CONF_OPTS += -Dintel=enabled > LIBDRM_DEPENDENCIES += libpciaccess > else > -LIBDRM_CONF_OPTS += -Dintel=false > +LIBDRM_CONF_OPTS += -Dintel=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) > -LIBDRM_CONF_OPTS += -Dradeon=true > +LIBDRM_CONF_OPTS += -Dradeon=enabled > else > -LIBDRM_CONF_OPTS += -Dradeon=false > +LIBDRM_CONF_OPTS += -Dradeon=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) > -LIBDRM_CONF_OPTS += -Damdgpu=true > +LIBDRM_CONF_OPTS += -Damdgpu=enabled > else > -LIBDRM_CONF_OPTS += -Damdgpu=false > +LIBDRM_CONF_OPTS += -Damdgpu=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) > -LIBDRM_CONF_OPTS += -Dnouveau=true > +LIBDRM_CONF_OPTS += -Dnouveau=enabled > else > -LIBDRM_CONF_OPTS += -Dnouveau=false > +LIBDRM_CONF_OPTS += -Dnouveau=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) > -LIBDRM_CONF_OPTS += -Dvmwgfx=true > +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled > else > -LIBDRM_CONF_OPTS += -Dvmwgfx=false > +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) > -LIBDRM_CONF_OPTS += -Domap=true > +LIBDRM_CONF_OPTS += -Domap=enabled > else > -LIBDRM_CONF_OPTS += -Domap=false > +LIBDRM_CONF_OPTS += -Domap=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) > -LIBDRM_CONF_OPTS += -Detnaviv=true > +LIBDRM_CONF_OPTS += -Detnaviv=enabled > else > -LIBDRM_CONF_OPTS += -Detnaviv=false > +LIBDRM_CONF_OPTS += -Detnaviv=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) > -LIBDRM_CONF_OPTS += -Dexynos=true > +LIBDRM_CONF_OPTS += -Dexynos=enabled > else > -LIBDRM_CONF_OPTS += -Dexynos=false > +LIBDRM_CONF_OPTS += -Dexynos=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) > -LIBDRM_CONF_OPTS += -Dfreedreno=true > +LIBDRM_CONF_OPTS += -Dfreedreno=enabled > else > -LIBDRM_CONF_OPTS += -Dfreedreno=false > +LIBDRM_CONF_OPTS += -Dfreedreno=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) > -LIBDRM_CONF_OPTS += -Dtegra=true > +LIBDRM_CONF_OPTS += -Dtegra=enabled > else > -LIBDRM_CONF_OPTS += -Dtegra=false > +LIBDRM_CONF_OPTS += -Dtegra=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) > -LIBDRM_CONF_OPTS += -Dvc4=true > +LIBDRM_CONF_OPTS += -Dvc4=enabled > else > -LIBDRM_CONF_OPTS += -Dvc4=false > +LIBDRM_CONF_OPTS += -Dvc4=disabled > endif > > ifeq ($(BR2_PACKAGE_HAS_UDEV),y) > @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false > endif > > ifeq ($(BR2_PACKAGE_VALGRIND),y) > -LIBDRM_CONF_OPTS += -Dvalgrind=true > +LIBDRM_CONF_OPTS += -Dvalgrind=enabled > LIBDRM_DEPENDENCIES += valgrind > else > -LIBDRM_CONF_OPTS += -Dvalgrind=false > +LIBDRM_CONF_OPTS += -Dvalgrind=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:15:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:15:38 +0100 Subject: [Buildroot] [PATCH 1/1] package/slang: bump to version 2.3.3 In-Reply-To: <20221028213127.243377-1-fontaine.fabrice@gmail.com> References: <20221028213127.243377-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161538.GI1058960@scaer> Fabrice, All, On 2022-10-28 23:31 +0200, Fabrice Fontaine spake thusly: > Refresh patch > > http://lists.jedsoft.org/lists/slang-users/2022/0000005.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/slang/0001-slsh-libs.patch | 6 ++++-- > package/slang/slang.hash | 4 ++-- > package/slang/slang.mk | 2 +- > 3 files changed, 7 insertions(+), 5 deletions(-) > > diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch > index 211cb4a0e0..fad16d1b2f 100644 > --- a/package/slang/0001-slsh-libs.patch > +++ b/package/slang/0001-slsh-libs.patch > @@ -5,6 +5,8 @@ probably Diego Petten?. > Signed-off-by: Gustavo Zacarias > [Bernd: rebased against 2.3.1a] > Signed-off-by: Bernd Kuhls > +[Fabrice: rebased against 2.3.3] > +Signed-off-by: Fabrice Fontaine > > --- a/slsh/Makefile.in > +++ b/slsh/Makefile.in > @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls > $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o > $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o > -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) > -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) > ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile > cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c > $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile > diff --git a/package/slang/slang.hash b/package/slang/slang.hash > index 3e211ab548..563117b48a 100644 > --- a/package/slang/slang.hash > +++ b/package/slang/slang.hash > @@ -1,6 +1,6 @@ > # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed > -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 > -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 > +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 > +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 > > # License file, locally computed > sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING > diff --git a/package/slang/slang.mk b/package/slang/slang.mk > index 44a0148088..e0f5968b46 100644 > --- a/package/slang/slang.mk > +++ b/package/slang/slang.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SLANG_VERSION = 2.3.2 > +SLANG_VERSION = 2.3.3 > SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 > SLANG_SITE = http://www.jedsoft.org/releases/slang > SLANG_LICENSE = GPL-2.0+ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:16:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:16:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/sngrep: bump to version 1.6.0 In-Reply-To: <20221028214811.273143-1-fontaine.fabrice@gmail.com> References: <20221028214811.273143-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161642.GJ1058960@scaer> Fabrice, All, On 2022-10-28 23:48 +0200, Fabrice Fontaine spake thusly: > - Drop patch (already in version) > - pcre2 is an optional dependency since > https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc > - zlib is an optional dependency since > https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f > > https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- [--SNIP--] > diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk > index 841a7bb991..7b614f1770 100644 > --- a/package/sngrep/sngrep.mk > +++ b/package/sngrep/sngrep.mk > @@ -4,8 +4,9 @@ > # > ################################################################################ > > -SNGREP_VERSION = 1.4.7 > -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) > +SNGREP_VERSION = 1.6.0 > +SNGREP_SITE = \ > + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) > SNGREP_LICENSE = GPL-3.0+ > SNGREP_LICENSE_FILES = LICENSE > SNGREP_AUTORECONF = YES > @@ -29,11 +30,21 @@ else > SNGREP_CONF_OPTS += --without-gnutls --without-openssl > endif > > -ifeq ($(BR2_PACKAGE_PCRE),y) > +ifeq ($(BR2_PACKAGE_PCRE2),y) > +SNGREP_DEPENDENCIES += pcre2 > +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 $ make check-package WARNING: package/sngrep/sngrep.mk:35: line contains trailing whitespace WARNING: package/sngrep/sngrep.mk:45: line contains trailing whitespace Applied to master with those fixed, thanks. Regards, Yann E. MORIN. > +else ifeq ($(BR2_PACKAGE_PCRE),y) > SNGREP_DEPENDENCIES += pcre > -SNGREP_CONF_OPTS += --with-pcre > +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 > else > -SNGREP_CONF_OPTS += --without-pcre > +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 > +endif > + > +ifeq ($(BR2_PACKAGE_ZLIB),y) > +SNGREP_DEPENDENCIES += zlib > +SNGREP_CONF_OPTS += --with-zlib > +else > +SNGREP_CONF_OPTS += --without-zlib > endif > > $(eval $(autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:00 +0100 Subject: [Buildroot] [PATCH 1/1] package/smartmontools: bump to version 7.3 In-Reply-To: <20221028215325.278206-1-fontaine.fabrice@gmail.com> References: <20221028215325.278206-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161700.GK1058960@scaer> Fabrice, All, On 2022-10-28 23:53 +0200, Fabrice Fontaine spake thusly: > https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/smartmontools/smartmontools.hash | 8 ++++---- > package/smartmontools/smartmontools.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash > index 3c5535b29a..e48e955d01 100644 > --- a/package/smartmontools/smartmontools.hash > +++ b/package/smartmontools/smartmontools.hash > @@ -1,7 +1,7 @@ > -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ > -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz > -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz > +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ > +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz > +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz > > # Locally computed > -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz > +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk > index 2e2bbcd4e2..d24f008df4 100644 > --- a/package/smartmontools/smartmontools.mk > +++ b/package/smartmontools/smartmontools.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SMARTMONTOOLS_VERSION = 7.2 > +SMARTMONTOOLS_VERSION = 7.3 > SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) > SMARTMONTOOLS_LICENSE = GPL-2.0+ > SMARTMONTOOLS_LICENSE_FILES = COPYING > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/taglib: bump to version 1.13 In-Reply-To: <20221028220223.286949-1-fontaine.fabrice@gmail.com> References: <20221028220223.286949-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161718.GL1058960@scaer> Fabrice, All, On 2022-10-29 00:02 +0200, Fabrice Fontaine spake thusly: > - Drop patch (already in version) > - Use WITH_ZLIB which is available since > https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e > > https://github.com/taglib/taglib/releases/tag/v1.13 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...e-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ------------------- > package/taglib/taglib.hash | 2 +- > package/taglib/taglib.mk | 5 ++- > 3 files changed, 5 insertions(+), 36 deletions(-) > delete mode 100644 package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > > diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > deleted file mode 100644 > index d8af73cb08..0000000000 > --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > +++ /dev/null > @@ -1,34 +0,0 @@ > -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 > -From: Oleg Antonyan > -Date: Thu, 13 May 2021 16:41:35 +0200 > -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= > - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= > - =?UTF-8?q?=201.12=20(#1012)?= > -MIME-Version: 1.0 > -Content-Type: text/plain; charset=UTF-8 > -Content-Transfer-Encoding: 8bit > - > -* fix error: duplicate volatile > - > -* fix volatile ATOMIC_INT in constructor > - > -[Retrieved from: > -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] > -Signed-off-by: Fabrice Fontaine > ---- > - taglib/toolkit/trefcounter.cpp | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp > -index 18cb596c0..5b089abf9 100644 > ---- a/taglib/toolkit/trefcounter.cpp > -+++ b/taglib/toolkit/trefcounter.cpp > -@@ -52,7 +52,7 @@ > - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) > - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) > - #else > --# define ATOMIC_INT volatile int > -+# define ATOMIC_INT int > - # define ATOMIC_INC(x) (++x) > - # define ATOMIC_DEC(x) (--x) > - #endif > diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash > index 38a44b41a5..7d1b2e8422 100644 > --- a/package/taglib/taglib.hash > +++ b/package/taglib/taglib.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz > +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL > sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL > diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk > index 9513e0d0e1..c687891002 100644 > --- a/package/taglib/taglib.mk > +++ b/package/taglib/taglib.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -TAGLIB_VERSION = 1.12 > +TAGLIB_VERSION = 1.13 > TAGLIB_SITE = http://taglib.github.io/releases > TAGLIB_INSTALL_STAGING = YES > TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 > @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib > > ifeq ($(BR2_PACKAGE_ZLIB),y) > TAGLIB_DEPENDENCIES += zlib > +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON > +else > +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF > endif > > define TAGLIB_REMOVE_DEVFILE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/qlibc: bump to version 2.4.7 In-Reply-To: <20221029075511.6599-1-fontaine.fabrice@gmail.com> References: <20221029075511.6599-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161742.GM1058960@scaer> Fabrice, All, On 2022-10-29 09:55 +0200, Fabrice Fontaine spake thusly: > https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/qlibc/qlibc.hash | 2 +- > package/qlibc/qlibc.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash > index 5cd6e1860f..9b2af1a4e3 100644 > --- a/package/qlibc/qlibc.hash > +++ b/package/qlibc/qlibc.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz > +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz > sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE > diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk > index 3996bb3706..838ba68746 100644 > --- a/package/qlibc/qlibc.mk > +++ b/package/qlibc/qlibc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QLIBC_VERSION = 2.4.6 > +QLIBC_VERSION = 2.4.7 > QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) > QLIBC_LICENSE = BSD-2-Clause > QLIBC_LICENSE_FILES = LICENSE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:25:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:25:39 +0100 Subject: [Buildroot] [PATCH 1/1] package/bdwgc: bump to version 8.2.2 In-Reply-To: <20221030155032.197144-1-paguilar@paguilar.org> References: <20221030155032.197144-1-paguilar@paguilar.org> Message-ID: <20221030162539.GN1058960@scaer> Pedro, All, On 2022-10-30 16:50 +0100, Pedro Aguilar spake thusly: > Signed-off-by: Pedro Aguilar > --- > package/bdwgc/bdwgc.hash | 2 +- > package/bdwgc/bdwgc.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash > index 4276939083..ca094549c9 100644 > --- a/package/bdwgc/bdwgc.hash > +++ b/package/bdwgc/bdwgc.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz > +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz > sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK > diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk > index cefa975998..e776fb7458 100644 > --- a/package/bdwgc/bdwgc.mk > +++ b/package/bdwgc/bdwgc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BDWGC_VERSION = 8.0.6 > +BDWGC_VERSION = 8.2.2 $ make bdwgc-legal-info >>> bdwgc 8.2.2 Collecting legal info ERROR: README.QUICK has wrong sha256 hash: ERROR: expected: 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 ERROR: got : a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a ERROR: Incomplete download, or man-in-the-middle (MITM) attack make[1]: *** [package/bdwgc/bdwgc.mk:40: bdwgc-legal-info] Error 1 Can you check what changed in the licensing terms, fix the hash file, and (briefly) explain that change as a comment in the commit log, please? Regards, Yann E. MORIN. > BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz > BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) > BDWGC_INSTALL_STAGING = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:20:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:11 +0100 Subject: [Buildroot] [git commit] package/ndisc6: bump to version 1.0.6 Message-ID: <20221030162807.1B1F6875A3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=800eef905aac67b2dbd2446c6d011227b473502f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master ndisc6: print NAT64 prefix if present. rdnssd: fix timeout calculation. https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/ndisc6/ndisc6.hash | 2 +- package/ndisc6/ndisc6.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash index d76e831208..e258382c53 100644 --- a/package/ndisc6/ndisc6.hash +++ b/package/ndisc6/ndisc6.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 # Locally computed sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk index ff6439e310..23734ca7d7 100644 --- a/package/ndisc6/ndisc6.mk +++ b/package/ndisc6/ndisc6.mk @@ -4,7 +4,7 @@ # ################################################################################ -NDISC6_VERSION = 1.0.5 +NDISC6_VERSION = 1.0.6 NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 NDISC6_SITE = http://www.remlab.net/files/ndisc6 NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) From yann.morin.1998 at free.fr Sun Oct 30 16:20:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:15 +0100 Subject: [Buildroot] [git commit] package/mtr: bump to version 0.95 Message-ID: <20221030162807.30874875A5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=79cfc6841943fed1428ea59747920d6b68962b9e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/traviscross/mtr/blob/v0.95/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mtr/mtr.hash | 2 +- package/mtr/mtr.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash index d6062ef08f..399799f49e 100644 --- a/package/mtr/mtr.hash +++ b/package/mtr/mtr.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk index 07c58a1e93..d3e3b1a97a 100644 --- a/package/mtr/mtr.mk +++ b/package/mtr/mtr.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTR_VERSION = 0.94 +MTR_VERSION = 0.95 MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) MTR_AUTORECONF = YES MTR_DEPENDENCIES = \ From yann.morin.1998 at free.fr Sun Oct 30 16:20:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:06 +0100 Subject: [Buildroot] [git commit] package/numactl: use official license files Message-ID: <20221030162807.05266875A1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=702a60a2962172d725b210da42da2289a219a83f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official license files available since version 2.0.13 and https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/numactl/numactl.hash | 3 ++- package/numactl/numactl.mk | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index 802175d360..a261eab9d0 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,3 +1,4 @@ # Locally calculated sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..6ff94091e9 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -7,7 +7,7 @@ NUMACTL_VERSION = 2.0.14 NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) -NUMACTL_LICENSE_FILES = README.md +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" From yann.morin.1998 at free.fr Sun Oct 30 16:20:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:13 +0100 Subject: [Buildroot] [git commit] package/mxml: bump to version 3.3.1 Message-ID: <20221030162807.25C4F875A4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f67480040b575fb225fcc2cd79c7a5408ef253b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of NOTICE (update in year: https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mxml/mxml.hash | 4 ++-- package/mxml/mxml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash index 38056f4c3a..412977dff0 100644 --- a/package/mxml/mxml.hash +++ b/package/mxml/mxml.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk index 88d35cb7ee..d224cf5308 100644 --- a/package/mxml/mxml.mk +++ b/package/mxml/mxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -MXML_VERSION = 3.3 +MXML_VERSION = 3.3.1 MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) MXML_LICENSE = Apache-2.0 with exceptions MXML_LICENSE_FILES = LICENSE NOTICE From yann.morin.1998 at free.fr Sun Oct 30 16:20:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:17 +0100 Subject: [Buildroot] [git commit] package/mtd: bump to version 2.1.5 Message-ID: <20221030162807.3BAC987570@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=517db8e59c30da4d20d93d61466a6c90c5e22a6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mtd/mtd.hash | 4 ++-- package/mtd/mtd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash index 481788f844..a2133e3ce2 100644 --- a/package/mtd/mtd.hash +++ b/package/mtd/mtd.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk index 45e7c0c61c..6e266a8760 100644 --- a/package/mtd/mtd.mk +++ b/package/mtd/mtd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTD_VERSION = 2.1.3 +MTD_VERSION = 2.1.5 MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils MTD_LICENSE = GPL-2.0 From yann.morin.1998 at free.fr Sun Oct 30 16:20:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:09 +0100 Subject: [Buildroot] [git commit] package/numactl: bump to version 2.0.16 Message-ID: <20221030162807.1055687570@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e9bc980d93a189a16e7320bd254b906c87ca9f87 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patches (already in version) - Use official tarball and so drop autoreconf https://github.com/numactl/numactl/releases/tag/v2.0.15 https://github.com/numactl/numactl/releases/tag/v2.0.16 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- .../0001-Do-not-stringify-SYMVER-symbols.patch | 25 ----------- .../numactl/0002-link-with-latomic-if-needed.patch | 52 ---------------------- package/numactl/numactl.hash | 2 +- package/numactl/numactl.mk | 6 +-- 4 files changed, 4 insertions(+), 81 deletions(-) diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch deleted file mode 100644 index c6981aaf73..0000000000 --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 -From: Scott McMillan -Date: Fri, 9 Oct 2020 08:56:52 -0500 -Subject: [PATCH] Do not stringify SYMVER symbols - -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a -Signed-off-by: Thomas Petazzoni ---- - util.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/util.h b/util.h -index 99ada33..f2a20ac 100644 ---- a/util.h -+++ b/util.h -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); - #if HAVE_ATTRIBUTE_SYMVER - #define SYMVER(a,b) __attribute__ ((symver (b))) - #else --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); -+#define SYMVER(a,b) __asm__ (".symver " a "," b); - #endif --- -2.30.2 - diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch deleted file mode 100644 index 6dff0cb233..0000000000 --- a/package/numactl/0002-link-with-latomic-if-needed.patch +++ /dev/null @@ -1,52 +0,0 @@ -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 6 May 2021 23:08:36 +0200 -Subject: [PATCH] link with -latomic if needed - -numactl unconditionally uses __atomic_fetch_and but some architectures -(e.g. sparc) needs to link with -latomic to be able to use it. So check -if -latomic is needed and update numa.pc accordingly - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] ---- - Makefile.am | 1 + - configure.ac | 2 ++ - numa.pc.in | 1 + - 3 files changed, 4 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index 44d0d76..34f6815 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -151,6 +151,7 @@ SED_PROCESS = \ - -e 's, at exec_prefix\@,$(exec_prefix),g' \ - -e 's, at libdir\@,$(libdir),g' \ - -e 's, at includedir\@,$(includedir),g' \ -+ -e 's, at LIBS\@,$(LIBS),g' \ - < $< > $@ || rm $@ - - %.pc: %.pc.in Makefile -diff --git a/configure.ac b/configure.ac -index 659a765..e3b0eb3 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) - - AC_CONFIG_FILES([Makefile]) - -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) -+ - # GCC tries to be "helpful" and only issue a warning for unrecognized - # attributes. So we compile the test with Werror, so that if the - # attribute is not recognized the compilation fails -diff --git a/numa.pc.in b/numa.pc.in -index 8a0f202..cc04d50 100644 ---- a/numa.pc.in -+++ b/numa.pc.in -@@ -8,3 +8,4 @@ Description: NUMA policy library - Version: @VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lnuma -+Libs.Private: @LIBS@ diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index a261eab9d0..757001b750 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index 6ff94091e9..b2f349255f 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -4,12 +4,12 @@ # ################################################################################ -NUMACTL_VERSION = 2.0.14 -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) +NUMACTL_VERSION = 2.0.16 +NUMACTL_SITE = \ + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES -NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" $(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 16:28:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:23 +0100 Subject: [Buildroot] [PATCH 1/2] package/numactl: use official license files In-Reply-To: <20221029084455.97704-1-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162823.GO1058960@scaer> Fabrice, All, On 2022-10-29 10:44 +0200, Fabrice Fontaine spake thusly: > Use official license files available since version 2.0.13 and > https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/numactl/numactl.hash | 3 ++- > package/numactl/numactl.mk | 2 +- > 2 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash > index 802175d360..a261eab9d0 100644 > --- a/package/numactl/numactl.hash > +++ b/package/numactl/numactl.hash > @@ -1,3 +1,4 @@ > # Locally calculated > sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz > -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md > +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 > diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk > index cf9c759693..6ff94091e9 100644 > --- a/package/numactl/numactl.mk > +++ b/package/numactl/numactl.mk > @@ -7,7 +7,7 @@ > NUMACTL_VERSION = 2.0.14 > NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) > NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) > -NUMACTL_LICENSE_FILES = README.md > +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 > NUMACTL_INSTALL_STAGING = YES > NUMACTL_AUTORECONF = YES > NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:28:37 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:37 +0100 Subject: [Buildroot] [PATCH 2/2] package/numactl: bump to version 2.0.16 In-Reply-To: <20221029084455.97704-2-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> <20221029084455.97704-2-fontaine.fabrice@gmail.com> Message-ID: <20221030162837.GP1058960@scaer> Fabrice, All, On 2022-10-29 10:44 +0200, Fabrice Fontaine spake thusly: > - Drop patches (already in version) > - Use official tarball and so drop autoreconf > > https://github.com/numactl/numactl/releases/tag/v2.0.15 > https://github.com/numactl/numactl/releases/tag/v2.0.16 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...0001-Do-not-stringify-SYMVER-symbols.patch | 25 --------- > .../0002-link-with-latomic-if-needed.patch | 52 ------------------- > package/numactl/numactl.hash | 2 +- > package/numactl/numactl.mk | 6 +-- > 4 files changed, 4 insertions(+), 81 deletions(-) > delete mode 100644 package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > delete mode 100644 package/numactl/0002-link-with-latomic-if-needed.patch > > diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > deleted file mode 100644 > index c6981aaf73..0000000000 > --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > +++ /dev/null > @@ -1,25 +0,0 @@ > -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 > -From: Scott McMillan > -Date: Fri, 9 Oct 2020 08:56:52 -0500 > -Subject: [PATCH] Do not stringify SYMVER symbols > - > -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a > -Signed-off-by: Thomas Petazzoni > ---- > - util.h | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/util.h b/util.h > -index 99ada33..f2a20ac 100644 > ---- a/util.h > -+++ b/util.h > -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); > - #if HAVE_ATTRIBUTE_SYMVER > - #define SYMVER(a,b) __attribute__ ((symver (b))) > - #else > --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); > -+#define SYMVER(a,b) __asm__ (".symver " a "," b); > - #endif > --- > -2.30.2 > - > diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch > deleted file mode 100644 > index 6dff0cb233..0000000000 > --- a/package/numactl/0002-link-with-latomic-if-needed.patch > +++ /dev/null > @@ -1,52 +0,0 @@ > -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Thu, 6 May 2021 23:08:36 +0200 > -Subject: [PATCH] link with -latomic if needed > - > -numactl unconditionally uses __atomic_fetch_and but some architectures > -(e.g. sparc) needs to link with -latomic to be able to use it. So check > -if -latomic is needed and update numa.pc accordingly > - > -Signed-off-by: Fabrice Fontaine > -[Retrieved from: > -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] > ---- > - Makefile.am | 1 + > - configure.ac | 2 ++ > - numa.pc.in | 1 + > - 3 files changed, 4 insertions(+) > - > -diff --git a/Makefile.am b/Makefile.am > -index 44d0d76..34f6815 100644 > ---- a/Makefile.am > -+++ b/Makefile.am > -@@ -151,6 +151,7 @@ SED_PROCESS = \ > - -e 's, at exec_prefix\@,$(exec_prefix),g' \ > - -e 's, at libdir\@,$(libdir),g' \ > - -e 's, at includedir\@,$(includedir),g' \ > -+ -e 's, at LIBS\@,$(LIBS),g' \ > - < $< > $@ || rm $@ > - > - %.pc: %.pc.in Makefile > -diff --git a/configure.ac b/configure.ac > -index 659a765..e3b0eb3 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) > - > - AC_CONFIG_FILES([Makefile]) > - > -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) > -+ > - # GCC tries to be "helpful" and only issue a warning for unrecognized > - # attributes. So we compile the test with Werror, so that if the > - # attribute is not recognized the compilation fails > -diff --git a/numa.pc.in b/numa.pc.in > -index 8a0f202..cc04d50 100644 > ---- a/numa.pc.in > -+++ b/numa.pc.in > -@@ -8,3 +8,4 @@ Description: NUMA policy library > - Version: @VERSION@ > - Cflags: -I${includedir} > - Libs: -L${libdir} -lnuma > -+Libs.Private: @LIBS@ > diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash > index a261eab9d0..757001b750 100644 > --- a/package/numactl/numactl.hash > +++ b/package/numactl/numactl.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz > +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 > diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk > index 6ff94091e9..b2f349255f 100644 > --- a/package/numactl/numactl.mk > +++ b/package/numactl/numactl.mk > @@ -4,12 +4,12 @@ > # > ################################################################################ > > -NUMACTL_VERSION = 2.0.14 > -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) > +NUMACTL_VERSION = 2.0.16 > +NUMACTL_SITE = \ > + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) > NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) > NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 > NUMACTL_INSTALL_STAGING = YES > -NUMACTL_AUTORECONF = YES > NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" > > $(eval $(autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:28:53 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/ndisc6: bump to version 1.0.6 In-Reply-To: <20221029085622.104382-1-fontaine.fabrice@gmail.com> References: <20221029085622.104382-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162853.GQ1058960@scaer> Fabrice, All, On 2022-10-29 10:56 +0200, Fabrice Fontaine spake thusly: > ndisc6: print NAT64 prefix if present. > rdnssd: fix timeout calculation. > > https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/ndisc6/ndisc6.hash | 2 +- > package/ndisc6/ndisc6.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash > index d76e831208..e258382c53 100644 > --- a/package/ndisc6/ndisc6.hash > +++ b/package/ndisc6/ndisc6.hash > @@ -1,4 +1,4 @@ > # Locally calculated after checking pgp signature > -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 > +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 > # Locally computed > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING > diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk > index ff6439e310..23734ca7d7 100644 > --- a/package/ndisc6/ndisc6.mk > +++ b/package/ndisc6/ndisc6.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -NDISC6_VERSION = 1.0.5 > +NDISC6_VERSION = 1.0.6 > NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 > NDISC6_SITE = http://www.remlab.net/files/ndisc6 > NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/mxml: bump to version 3.3.1 In-Reply-To: <20221029092517.115919-1-fontaine.fabrice@gmail.com> References: <20221029092517.115919-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162907.GR1058960@scaer> Fabrice, All, On 2022-10-29 11:25 +0200, Fabrice Fontaine spake thusly: > Update hash of NOTICE (update in year: > https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) > > https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mxml/mxml.hash | 4 ++-- > package/mxml/mxml.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash > index 38056f4c3a..412977dff0 100644 > --- a/package/mxml/mxml.hash > +++ b/package/mxml/mxml.hash > @@ -1,4 +1,4 @@ > # Locally computed > -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz > +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz > sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE > -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE > +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE > diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk > index 88d35cb7ee..d224cf5308 100644 > --- a/package/mxml/mxml.mk > +++ b/package/mxml/mxml.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MXML_VERSION = 3.3 > +MXML_VERSION = 3.3.1 > MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) > MXML_LICENSE = Apache-2.0 with exceptions > MXML_LICENSE_FILES = LICENSE NOTICE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/mtr: bump to version 0.95 In-Reply-To: <20221029093947.124529-1-fontaine.fabrice@gmail.com> References: <20221029093947.124529-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162921.GS1058960@scaer> Fabrice, All, On 2022-10-29 11:39 +0200, Fabrice Fontaine spake thusly: > https://github.com/traviscross/mtr/blob/v0.95/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mtr/mtr.hash | 2 +- > package/mtr/mtr.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash > index d6062ef08f..399799f49e 100644 > --- a/package/mtr/mtr.hash > +++ b/package/mtr/mtr.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz > +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk > index 07c58a1e93..d3e3b1a97a 100644 > --- a/package/mtr/mtr.mk > +++ b/package/mtr/mtr.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MTR_VERSION = 0.94 > +MTR_VERSION = 0.95 > MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) > MTR_AUTORECONF = YES > MTR_DEPENDENCIES = \ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:40 +0100 Subject: [Buildroot] [PATCH 1/1] package/mtd: bump to version 2.1.5 In-Reply-To: <20221029094535.133025-1-fontaine.fabrice@gmail.com> References: <20221029094535.133025-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162940.GT1058960@scaer> Fabrice, All, On 2022-10-29 11:45 +0200, Fabrice Fontaine spake thusly: > https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html > https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mtd/mtd.hash | 4 ++-- > package/mtd/mtd.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash > index 481788f844..a2133e3ce2 100644 > --- a/package/mtd/mtd.hash > +++ b/package/mtd/mtd.hash > @@ -1,4 +1,4 @@ > # Locally calculated after checking pgp signature > -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc > -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 > +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc > +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 > sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk > index 45e7c0c61c..6e266a8760 100644 > --- a/package/mtd/mtd.mk > +++ b/package/mtd/mtd.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MTD_VERSION = 2.1.3 > +MTD_VERSION = 2.1.5 > MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 > MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils > MTD_LICENSE = GPL-2.0 > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:45:45 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:45:45 +0100 Subject: [Buildroot] [PATCH 1/1] Force cmake packages to use makefiles In-Reply-To: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> References: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> Message-ID: <20221030164545.GU1058960@scaer> Woody, All, On 2022-10-07 16:27 +0000, Woody Douglass via buildroot spake thusly: > > Force cmake packages to use the "Unix Makefiles" generator > in case CMAKE_GENERATOR is set in the host environment. This > patch further isolates the buildroot build environment from > the host. > > Signed-off-by: Woodrow Douglass > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..db9fdebb8d 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/to > olchainfile.cmake" \ Your patch was damaged, so I had to manaully fix it when applying. Normally, sending patches with "git send-email" takes care of properly formatting patches. Applied to master, thanks. Regards, Yann E. MORIN. > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > -- > 2.20.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:48:25 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:48:25 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: unset CMAKE_GENERATOR vars In-Reply-To: <20221029110943.155259-1-glex.spb@gmail.com> References: <20221029110943.155259-1-glex.spb@gmail.com> Message-ID: <20221030164825.GV1058960@scaer> Gleb, All, On 2022-10-29 12:09 +0100, Gleb Mazovetskiy spake thusly: > If the user environment defines `CMAKE_GENERATOR` (e.g. > `CMAKE_GENERATOR=Ninja`), buildroot would previously fail to build cmake > packages because buildroot uses `make` explicitly (as opposed to > `cmake --build`). > > Unsets all the `CMAKE_GENERATOR*` variables before configuring a cmake > package. > > Signed-off-by: Gleb Mazovetskiy > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..96b2579cc5 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -86,6 +86,7 @@ define $(2)_CONFIGURE_CMDS > (mkdir -p $$($$(PKG)_BUILDDIR) && \ > cd $$($$(PKG)_BUILDDIR) && \ > rm -f CMakeCache.txt && \ > + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ I've instead applied the patch from Woody: https://patchwork.ozlabs.org/project/buildroot/patch/94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel at carnegierobotics.com/ So I dropped your patch. In the future, we should be able to replace the hard-coded "Unix Makefiles" with a per-package setting, where package can elect building built with nother backend (or better yet, switch netirely to another backend globally), and the patch from Woody felt like slightly preparing for that future. Regards, Yann E. MORIN. > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > @@ -111,6 +112,7 @@ define $(2)_CONFIGURE_CMDS > (mkdir -p $$($$(PKG)_BUILDDIR) && \ > cd $$($$(PKG)_BUILDDIR) && \ > rm -f CMakeCache.txt && \ > + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ > PATH=$$(BR_PATH) \ > PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \ > PKG_CONFIG_SYSROOT_DIR="/" \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:43:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:43:11 +0100 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles Message-ID: <20221030164840.BABD7875A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Force cmake packages to use the "Unix Makefiles" generator in case CMAKE_GENERATOR is set in the host environment. This patch further isolates the buildroot build environment from the host. Signed-off-by: Woodrow Douglass Signed-off-by: Yann E. MORIN --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..db9fdebb8d 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ From yann.morin.1998 at free.fr Sun Oct 30 16:53:16 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:53:16 +0100 Subject: [Buildroot] [PATCH 1/1] package/openipmi: bump to version 2.0.33 In-Reply-To: <20221029083130.77419-1-fontaine.fabrice@gmail.com> References: <20221029083130.77419-1-fontaine.fabrice@gmail.com> Message-ID: <20221030165316.GW1058960@scaer> Fabrice, All, On 2022-10-29 10:31 +0200, Fabrice Fontaine spake thusly: > Drop patch (already in version) and so also drop autoreconf > > Signed-off-by: Fabrice Fontaine [--SNIP--] > diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk > index 81492ec131..ccf86f93cd 100644 > --- a/package/openipmi/openipmi.mk > +++ b/package/openipmi/openipmi.mk > @@ -4,15 +4,13 @@ > # > ################################################################################ > > -OPENIPMI_VERSION = 2.0.32 > +OPENIPMI_VERSION = 2.0.33 > OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library > OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz > OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause > OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD > OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf > OPENIPMI_INSTALL_STAGING = YES > -# Patching Makefile.am > -OPENIPMI_AUTORECONF = YES > OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" > OPENIPMI_CONF_OPTS = \ > --with-glib=no \ This hunk does not apply, because the _CONF_OPTS are different: OPENIPMI_CONF_OPTS = \ --with-execinfo=no \ --with-glib=no \ --with-tcl=no \ ... Do you have local changes you forgot? Regards, Yann E. MORIN. > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From paguilar at paguilar.org Sun Oct 30 17:26:39 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sun, 30 Oct 2022 18:26:39 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030172639.199134-1-paguilar@paguilar.org> The license in file README.QUICK remains unchanged, but some C++ instructions change along with a few small typos/fixes. Signed-off-by: Pedro Aguilar --- Changes v1 -> v2: - Update license file hash (pointed out by Yann) --- package/bdwgc/bdwgc.hash | 4 ++-- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..917089da08 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Sun Oct 30 17:56:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 18:56:32 +0100 Subject: [Buildroot] [PATCH v2, 2/2] package/openipmi: bump to version 2.0.33 In-Reply-To: <20221030175632.4139-1-fontaine.fabrice@gmail.com> References: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Message-ID: <20221030175632.4139-2-fontaine.fabrice@gmail.com> Drop patch (already in version) and so also drop autoreconf Signed-off-by: Fabrice Fontaine --- ...01-Avoid-searching-host-library-path.patch | 53 ------------------- package/openipmi/openipmi.hash | 6 +-- package/openipmi/openipmi.mk | 4 +- 3 files changed, 4 insertions(+), 59 deletions(-) delete mode 100644 package/openipmi/0001-Avoid-searching-host-library-path.patch diff --git a/package/openipmi/0001-Avoid-searching-host-library-path.patch b/package/openipmi/0001-Avoid-searching-host-library-path.patch deleted file mode 100644 index 15b4510f67..0000000000 --- a/package/openipmi/0001-Avoid-searching-host-library-path.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Wed, 22 Jul 2015 07:04:33 +0300 -Subject: [PATCH] Avoid searching host library path - -The $(libdir) variable points to the location of the directory on the target -system, /usr/lib by default. When cross compiling this directory contains the -host libraries which may be different than target libraries. Don't use -$(libdir) in the library search path. - -Signed-off-by: Baruch Siach -Signed-off-by: Joel Stanley -[Fabrice: refresh patch for 2.0.32] -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/35] ---- - cmdlang/Makefile.am | 3 +-- - unix/Makefile.am | 6 ++---- - 2 files changed, 3 insertions(+), 6 deletions(-) - -diff --git a/cmdlang/Makefile.am b/cmdlang/Makefile.am -index 264ee12be79f..0b3843784656 100644 ---- a/cmdlang/Makefile.am -+++ b/cmdlang/Makefile.am -@@ -15,7 +15,7 @@ libOpenIPMIcmdlang_la_SOURCES = cmdlang.c cmd_domain.c cmd_entity.c cmd_mc.c \ - $(top_builddir)/utils/libOpenIPMIutils.la \ - $(top_builddir)/lib/libOpenIPMI.la - libOpenIPMIcmdlang_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - bin_PROGRAMS = openipmish - -diff --git a/unix/Makefile.am b/unix/Makefile.am -index 5128839dad13..bd0f897ba8d6 100644 ---- a/unix/Makefile.am -+++ b/unix/Makefile.am -@@ -10,12 +10,12 @@ lib_LTLIBRARIES = libOpenIPMIposix.la libOpenIPMIpthread.la - libOpenIPMIpthread_la_LIBADD = -lpthread $(GDBM_LIB) \ - $(top_builddir)/utils/libOpenIPMIutils.la $(RT_LIB) - libOpenIPMIpthread_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - libOpenIPMIposix_la_SOURCES = posix_os_hnd.c selector.c - libOpenIPMIposix_la_LIBADD = $(top_builddir)/utils/libOpenIPMIutils.la \ - $(GDBM_LIB) $(RT_LIB) - libOpenIPMIposix_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - noinst_HEADERS = heap.h - diff --git a/package/openipmi/openipmi.hash b/package/openipmi/openipmi.hash index eded076ade..fc3cf1a520 100644 --- a/package/openipmi/openipmi.hash +++ b/package/openipmi/openipmi.hash @@ -1,8 +1,8 @@ # From http://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library/ -sha1 73d7dce4312b006983b11367e4a43d4ec52cf888 OpenIPMI-2.0.32.tar.gz -md5 532404c9df7d0e8bde975b95b9e6775b OpenIPMI-2.0.32.tar.gz +sha1 4387f227aad92756e296d1c9421e83231d355dbd OpenIPMI-2.0.33.tar.gz +md5 923d2914dbbc3307712f8c58401bab0f OpenIPMI-2.0.33.tar.gz # Locally computed -sha256 f6d0fd4c0a74b05f80907229d0b270f54ca23294bcc11979f8b8d12766786945 OpenIPMI-2.0.32.tar.gz +sha256 fb53e9ea5e2681cf8af7cda024b1a0044c675f84116ca27ae9616c8b7ad95b49 OpenIPMI-2.0.33.tar.gz sha256 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670 COPYING sha256 185323a62589e7ee80f86bf2ea29caad9a09fdda0ea3f1c00db8b778c7edf60e COPYING.BSD sha256 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509 COPYING.LIB diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index 81492ec131..ccf86f93cd 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -4,15 +4,13 @@ # ################################################################################ -OPENIPMI_VERSION = 2.0.32 +OPENIPMI_VERSION = 2.0.33 OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf OPENIPMI_INSTALL_STAGING = YES -# Patching Makefile.am -OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ --with-glib=no \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 17:56:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 18:56:31 +0100 Subject: [Buildroot] [PATCH v2, 1/2] package/openipmi: add libexecinfo optional dependency Message-ID: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Add libexecinfo optional dependency as upstream rejected the patch to add --with-execinfo=no Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2 (after review of Yann E. Morin): - Add missing local patch ...igure.ac-add-without-execinfo-option.patch | 55 ------------------- package/openipmi/openipmi.mk | 6 +- 2 files changed, 5 insertions(+), 56 deletions(-) delete mode 100644 package/openipmi/0002-configure.ac-add-without-execinfo-option.patch diff --git a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch b/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch deleted file mode 100644 index e1838a06f4..0000000000 --- a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 388033e3d0129510c3884333bc428cefeb75e0b8 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Mon, 3 Jan 2022 23:27:21 +0100 -Subject: [PATCH] configure.ac: add --without-execinfo option - -Add an option to allow the user to disable execinfo to avoid the -following build failure on musl with -https://github.com/mikroskeem/libexecinfo: - -/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/openipmi-2.0.28/utils/.libs/libOpenIPMIutils.so: undefined reference to `backtrace' - -Fixes: - - http://autobuild.buildroot.org/results/dcc33c5cca97d538231647a94212450f043974b3 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/36] ---- - configure.ac | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 607864b9..f369166f 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -77,6 +77,16 @@ AC_ARG_WITH(poptlibs, - POPTLIBS="$withval" - ) - -+tryexecinfo=yes -+AC_ARG_WITH(execinfo, -+[ --with-execinfo[[=yes|no]] Look for execinfo.], -+ if test "x$withval" = "xyes"; then -+ tryexecinfo=yes -+ elif test "x$withval" = "xno"; then -+ tryexecinfo=no -+ fi, -+) -+ - # If UCD SNMP requires OpenSSL, this tells where to find the crypto lib - tryopenssl=yes - AC_ARG_WITH(openssl, -@@ -275,7 +285,9 @@ AM_PROG_CC_C_O - AC_PROG_LIBTOOL - AC_STDC_HEADERS - --AC_CHECK_HEADERS(execinfo.h) -+if test "x$tryexecinfo" != "xno"; then -+ AC_CHECK_HEADERS(execinfo.h) -+fi - AC_CHECK_HEADERS([netinet/ether.h]) - AC_CHECK_HEADERS([sys/ethernet.h]) - --- -2.34.1 - diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index b3a4d90d4b..81492ec131 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -15,7 +15,6 @@ OPENIPMI_INSTALL_STAGING = YES OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ - --with-execinfo=no \ --with-glib=no \ --with-tcl=no \ --with-perl=no \ @@ -26,6 +25,11 @@ ifeq ($(BR2_PACKAGE_GDBM),y) OPENIPMI_DEPENDENCIES += gdbm endif +ifeq ($(BR2_PACKAGE_LIBEXECINFO),y) +OPENIPMI_DEPENDENCIES += libexecinfo +OPENIPMI_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -lexecinfo" +endif + ifeq ($(BR2_PACKAGE_OPENSSL),y) OPENIPMI_DEPENDENCIES += openssl OPENIPMI_CONF_OPTS += --with-openssl=yes -- 2.35.1 From baruch at tkos.co.il Sun Oct 30 18:20:15 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Sun, 30 Oct 2022 20:20:15 +0200 Subject: [Buildroot] [PATCH] package/libcurl: fix crypto backend selection Message-ID: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> Since version 7.77 --with-ssl that used to select OpenSSL renamed to --with-openssl. --without-ssl changed to mean no crypto backend. Only in version 7.86 setting both --without-ssl and some other crypto parameter became a hard configure error. Update OpenSSL selection parameter, and add --without-ssl explicitly for the case of no selected crypto backend. Fixes: http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ Cc: Matt Weber Signed-off-by: Baruch Siach --- package/libcurl/libcurl.mk | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 3c3ad082fc65..8de43581073d 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -50,6 +50,10 @@ endif LIBCURL_CONFIG_SCRIPTS = curl-config +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) +LIBCURL_CONF_OPTS += --without-ssl +endif + ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) LIBCURL_DEPENDENCIES += openssl # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs # are found first. LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ --with-ca-path=/etc/ssl/certs else -LIBCURL_CONF_OPTS += --without-ssl +LIBCURL_CONF_OPTS += --without-openssl endif ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 18:20:27 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 19:20:27 +0100 Subject: [Buildroot] [PATCH 1/1] package/batman-adv: bump to version 2022.2 Message-ID: <20221030182027.186259-1-fontaine.fabrice@gmail.com> This bump will fix the following build failure with kernel >= 5.18 thanks to https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ?batadv_bla_send_claim?: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ?netif_rx_any_context? [-Werror=implicit-function-declaration] 446 | netif_rx_any_context(skb); | ^~~~~~~~~~~~~~~~~~~~ Indeed, netif_rx_any_context has been dropped since kernel 5.18: https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst Fixes: - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 Signed-off-by: Fabrice Fontaine --- package/batman-adv/batman-adv.hash | 6 +++--- package/batman-adv/batman-adv.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash index c098663739..c5add4cdea 100644 --- a/package/batman-adv/batman-adv.hash +++ b/package/batman-adv/batman-adv.hash @@ -1,7 +1,7 @@ -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz # Hash for license files -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk index 6a1aaa699c..d279694bf5 100644 --- a/package/batman-adv/batman-adv.mk +++ b/package/batman-adv/batman-adv.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATMAN_ADV_VERSION = 2021.4 +BATMAN_ADV_VERSION = 2022.2 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 30 18:20:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:20:41 +0100 Subject: [Buildroot] [PATCH v2, 1/2] package/openipmi: add libexecinfo optional dependency In-Reply-To: <20221030175632.4139-1-fontaine.fabrice@gmail.com> References: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Message-ID: <20221030182041.GX1058960@scaer> Fabrice, All, On 2022-10-30 18:56 +0100, Fabrice Fontaine spake thusly: > Add libexecinfo optional dependency as upstream rejected the patch to > add --with-execinfo=no Indeed, they rejected it, but they suggested an alternate solution: check for backtrace() and whether it requires -lexecinfo. Something like: AC_SEARCH_LIBS( [backtrace], [execinfo], , [AC_MSG_ERROR([backtrace() not found and no library provides it; maybe install libexecinfo])] ) Regards, Yann E. MORIN. > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2 (after review of Yann E. Morin): > - Add missing local patch > > ...igure.ac-add-without-execinfo-option.patch | 55 ------------------- > package/openipmi/openipmi.mk | 6 +- > 2 files changed, 5 insertions(+), 56 deletions(-) > delete mode 100644 package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > > diff --git a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch b/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > deleted file mode 100644 > index e1838a06f4..0000000000 > --- a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > +++ /dev/null > @@ -1,55 +0,0 @@ > -From 388033e3d0129510c3884333bc428cefeb75e0b8 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Mon, 3 Jan 2022 23:27:21 +0100 > -Subject: [PATCH] configure.ac: add --without-execinfo option > - > -Add an option to allow the user to disable execinfo to avoid the > -following build failure on musl with > -https://github.com/mikroskeem/libexecinfo: > - > -/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/openipmi-2.0.28/utils/.libs/libOpenIPMIutils.so: undefined reference to `backtrace' > - > -Fixes: > - - http://autobuild.buildroot.org/results/dcc33c5cca97d538231647a94212450f043974b3 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: https://sourceforge.net/p/openipmi/patches/36] > ---- > - configure.ac | 14 +++++++++++++- > - 1 file changed, 13 insertions(+), 1 deletion(-) > - > -diff --git a/configure.ac b/configure.ac > -index 607864b9..f369166f 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -77,6 +77,16 @@ AC_ARG_WITH(poptlibs, > - POPTLIBS="$withval" > - ) > - > -+tryexecinfo=yes > -+AC_ARG_WITH(execinfo, > -+[ --with-execinfo[[=yes|no]] Look for execinfo.], > -+ if test "x$withval" = "xyes"; then > -+ tryexecinfo=yes > -+ elif test "x$withval" = "xno"; then > -+ tryexecinfo=no > -+ fi, > -+) > -+ > - # If UCD SNMP requires OpenSSL, this tells where to find the crypto lib > - tryopenssl=yes > - AC_ARG_WITH(openssl, > -@@ -275,7 +285,9 @@ AM_PROG_CC_C_O > - AC_PROG_LIBTOOL > - AC_STDC_HEADERS > - > --AC_CHECK_HEADERS(execinfo.h) > -+if test "x$tryexecinfo" != "xno"; then > -+ AC_CHECK_HEADERS(execinfo.h) > -+fi > - AC_CHECK_HEADERS([netinet/ether.h]) > - AC_CHECK_HEADERS([sys/ethernet.h]) > - > --- > -2.34.1 > - > diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk > index b3a4d90d4b..81492ec131 100644 > --- a/package/openipmi/openipmi.mk > +++ b/package/openipmi/openipmi.mk > @@ -15,7 +15,6 @@ OPENIPMI_INSTALL_STAGING = YES > OPENIPMI_AUTORECONF = YES > OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" > OPENIPMI_CONF_OPTS = \ > - --with-execinfo=no \ > --with-glib=no \ > --with-tcl=no \ > --with-perl=no \ > @@ -26,6 +25,11 @@ ifeq ($(BR2_PACKAGE_GDBM),y) > OPENIPMI_DEPENDENCIES += gdbm > endif > > +ifeq ($(BR2_PACKAGE_LIBEXECINFO),y) > +OPENIPMI_DEPENDENCIES += libexecinfo > +OPENIPMI_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -lexecinfo" > +endif > + > ifeq ($(BR2_PACKAGE_OPENSSL),y) > OPENIPMI_DEPENDENCIES += openssl > OPENIPMI_CONF_OPTS += --with-openssl=yes > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:21:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:21:08 +0100 Subject: [Buildroot] [git commit] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030182257.89B45875B1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d7619682552dd34f499e9f17b0234af53da743ec branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The license in file README.QUICK remains unchanged, but for the copyright years, some C++ instructions changes, iand a few small typos/fixes. Signed-off-by: Pedro Aguilar [yann.morin.1998 at free.fr: mention copyright years change] Signed-off-by: Yann E. MORIN --- package/bdwgc/bdwgc.hash | 4 ++-- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..917089da08 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Sun Oct 30 18:23:27 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:23:27 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/bdwgc: bump to version 8.2.2 In-Reply-To: <20221030172639.199134-1-paguilar@paguilar.org> References: <20221030172639.199134-1-paguilar@paguilar.org> Message-ID: <20221030182327.GY1058960@scaer> Pedro, All, On 2022-10-30 18:26 +0100, Pedro Aguilar spake thusly: > The license in file README.QUICK remains unchanged, but some > C++ instructions change along with a few small typos/fixes. ... and the copyright years too, so I added that to the list, and applied to master, thanks. Regards, Yann E. MORIN. > Signed-off-by: Pedro Aguilar > --- > Changes v1 -> v2: > - Update license file hash (pointed out by Yann) > > --- > package/bdwgc/bdwgc.hash | 4 ++-- > package/bdwgc/bdwgc.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash > index 4276939083..917089da08 100644 > --- a/package/bdwgc/bdwgc.hash > +++ b/package/bdwgc/bdwgc.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz > -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK > +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz > +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK > diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk > index cefa975998..e776fb7458 100644 > --- a/package/bdwgc/bdwgc.mk > +++ b/package/bdwgc/bdwgc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BDWGC_VERSION = 8.0.6 > +BDWGC_VERSION = 8.2.2 > BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz > BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) > BDWGC_INSTALL_STAGING = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:33:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:33:38 +0100 Subject: [Buildroot] [git commit] package/libcurl: fix crypto backend selection Message-ID: <20221030183358.0682C875B0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f39810149ebe4041c77ca02560c58c93328de723 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since version 7.77 --with-ssl that used to select OpenSSL renamed to --with-openssl. --without-ssl changed to mean no crypto backend. Only in version 7.86 setting both --without-ssl and some other crypto parameter became a hard configure error. Update OpenSSL selection parameter, and add --without-ssl explicitly for the case of no selected crypto backend. Fixes: http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ Cc: Matt Weber Signed-off-by: Baruch Siach Signed-off-by: Yann E. MORIN --- package/libcurl/libcurl.mk | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 3c3ad082fc..8de4358107 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -50,6 +50,10 @@ endif LIBCURL_CONFIG_SCRIPTS = curl-config +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) +LIBCURL_CONF_OPTS += --without-ssl +endif + ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) LIBCURL_DEPENDENCIES += openssl # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs # are found first. LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ --with-ca-path=/etc/ssl/certs else -LIBCURL_CONF_OPTS += --without-ssl +LIBCURL_CONF_OPTS += --without-openssl endif ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) From yann.morin.1998 at free.fr Sun Oct 30 18:32:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:32:28 +0100 Subject: [Buildroot] [git commit] package/batman-adv: bump to version 2022.2 Message-ID: <20221030183357.F1745875BF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=50da16cf949596ee450e8c3c20cc676a3baabc9a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This bump will fix the following build failure with kernel >= 5.18 thanks to https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ???batadv_bla_send_claim???: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ???netif_rx_any_context??? [-Werror=implicit-function-declaration] 446 | netif_rx_any_context(skb); | ^~~~~~~~~~~~~~~~~~~~ Indeed, netif_rx_any_context has been dropped since kernel 5.18: https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst Fixes: - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/batman-adv/batman-adv.hash | 6 +++--- package/batman-adv/batman-adv.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash index c098663739..c5add4cdea 100644 --- a/package/batman-adv/batman-adv.hash +++ b/package/batman-adv/batman-adv.hash @@ -1,7 +1,7 @@ -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz # Hash for license files -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk index 6a1aaa699c..d279694bf5 100644 --- a/package/batman-adv/batman-adv.mk +++ b/package/batman-adv/batman-adv.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATMAN_ADV_VERSION = 2021.4 +BATMAN_ADV_VERSION = 2022.2 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT From yann.morin.1998 at free.fr Sun Oct 30 18:34:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:34:07 +0100 Subject: [Buildroot] [PATCH] package/libcurl: fix crypto backend selection In-Reply-To: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> References: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> Message-ID: <20221030183407.GZ1058960@scaer> Baruch, All, On 2022-10-30 20:20 +0200, Baruch Siach via buildroot spake thusly: > Since version 7.77 --with-ssl that used to select OpenSSL renamed to > --with-openssl. --without-ssl changed to mean no crypto backend. > > Only in version 7.86 setting both --without-ssl and some other crypto > parameter became a hard configure error. > > Update OpenSSL selection parameter, and add --without-ssl explicitly for > the case of no selected crypto backend. > > Fixes: > http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ > http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ > http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ > > Cc: Matt Weber > Signed-off-by: Baruch Siach Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libcurl/libcurl.mk | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk > index 3c3ad082fc65..8de43581073d 100644 > --- a/package/libcurl/libcurl.mk > +++ b/package/libcurl/libcurl.mk > @@ -50,6 +50,10 @@ endif > > LIBCURL_CONFIG_SCRIPTS = curl-config > > +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) > +LIBCURL_CONF_OPTS += --without-ssl > +endif > + > ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) > LIBCURL_DEPENDENCIES += openssl > # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up > @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl > # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs > # are found first. > LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib > -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ > +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ > --with-ca-path=/etc/ssl/certs > else > -LIBCURL_CONF_OPTS += --without-ssl > +LIBCURL_CONF_OPTS += --without-openssl > endif > > ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:34:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:34:22 +0100 Subject: [Buildroot] [PATCH 1/1] package/batman-adv: bump to version 2022.2 In-Reply-To: <20221030182027.186259-1-fontaine.fabrice@gmail.com> References: <20221030182027.186259-1-fontaine.fabrice@gmail.com> Message-ID: <20221030183422.GA1058960@scaer> Fabrice, All, On 2022-10-30 19:20 +0100, Fabrice Fontaine spake thusly: > This bump will fix the following build failure with kernel >= 5.18 thanks to > https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: > > /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ?batadv_bla_send_claim?: > /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ?netif_rx_any_context? [-Werror=implicit-function-declaration] > 446 | netif_rx_any_context(skb); > | ^~~~~~~~~~~~~~~~~~~~ > > Indeed, netif_rx_any_context has been dropped since kernel 5.18: > https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 > > https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst > > Fixes: > - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/batman-adv/batman-adv.hash | 6 +++--- > package/batman-adv/batman-adv.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash > index c098663739..c5add4cdea 100644 > --- a/package/batman-adv/batman-adv.hash > +++ b/package/batman-adv/batman-adv.hash > @@ -1,7 +1,7 @@ > -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 > -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz > +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 > +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz > > # Hash for license files > -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz > +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz > sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 > sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT > diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk > index 6a1aaa699c..d279694bf5 100644 > --- a/package/batman-adv/batman-adv.mk > +++ b/package/batman-adv/batman-adv.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BATMAN_ADV_VERSION = 2021.4 > +BATMAN_ADV_VERSION = 2022.2 > BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv > BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) > BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 30 18:53:59 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 14:53:59 -0400 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles In-Reply-To: <20221030164840.BABD7875A8@busybox.osuosl.org> References: <20221030164840.BABD7875A8@busybox.osuosl.org> Message-ID: On Sun, Oct 30, 2022 at 12:48 PM Yann E. MORIN wrote: > > commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > > Force cmake packages to use the "Unix Makefiles" generator > in case CMAKE_GENERATOR is set in the host environment. This > patch further isolates the buildroot build environment from > the host. All autobuilders appear to have broken due to this commit: http://autobuild.buildroot.net/results/b0c/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9/build-end.log Error seems to be: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Looks like MakeFiles is spelled wrong. > > Signed-off-by: Woodrow Douglass > Signed-off-by: Yann E. MORIN > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..db9fdebb8d 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Sun Oct 30 19:00:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 13:00:28 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: MakeFiles -> Makefiles Message-ID: <20221030190028.3632333-1-james.hilliard1@gmail.com> Fixes: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Signed-off-by: James Hilliard --- package/pkg-cmake.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index db9fdebb8d..8c375779cb 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 30 19:01:22 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 15:01:22 -0400 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles In-Reply-To: References: <20221030164840.BABD7875A8@busybox.osuosl.org> Message-ID: On Sun, Oct 30, 2022 at 2:53 PM James Hilliard wrote: > > On Sun, Oct 30, 2022 at 12:48 PM Yann E. MORIN wrote: > > > > commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c > > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > > > > Force cmake packages to use the "Unix Makefiles" generator > > in case CMAKE_GENERATOR is set in the host environment. This > > patch further isolates the buildroot build environment from > > the host. > > All autobuilders appear to have broken due to this commit: > http://autobuild.buildroot.net/results/b0c/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9/build-end.log > > Error seems to be: > CMake Error: Could not create named generator Unix MakeFiles > > Generators > Green Hills MULTI = Generates Green Hills MULTI files > (experimental, work-in-progress). > * Unix Makefiles = Generates standard UNIX makefiles. > Ninja = Generates build.ninja files. > Ninja Multi-Config = Generates build-.ninja files. > Watcom WMake = Generates Watcom WMake makefiles. > CodeBlocks - Ninja = Generates CodeBlocks project files. > CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. > CodeLite - Ninja = Generates CodeLite project files. > CodeLite - Unix Makefiles = Generates CodeLite project files. > Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. > Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. > Kate - Ninja = Generates Kate project files. > Kate - Unix Makefiles = Generates Kate project files. > Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. > Sublime Text 2 - Unix Makefiles > = Generates Sublime Text 2 project files. > > Looks like MakeFiles is spelled wrong. This should fix it: https://patchwork.ozlabs.org/project/buildroot/patch/20221030190028.3632333-1-james.hilliard1 at gmail.com/ > > > > > Signed-off-by: Woodrow Douglass > > Signed-off-by: Yann E. MORIN > > --- > > package/pkg-cmake.mk | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > > index 081960b5bf..db9fdebb8d 100644 > > --- a/package/pkg-cmake.mk > > +++ b/package/pkg-cmake.mk > > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > > rm -f CMakeCache.txt && \ > > PATH=$$(BR_PATH) \ > > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > > + -G"Unix MakeFiles" \ > > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > > -DCMAKE_INSTALL_PREFIX="/usr" \ > > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > > + -G"Unix MakeFiles" \ > > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From yann.morin.1998 at free.fr Sun Oct 30 19:18:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:18:34 +0100 Subject: [Buildroot] [git commit] package/pkg-cmake.mk: MakeFiles -> Makefiles Message-ID: <20221030191845.74216875C3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68b68518a8cc372cd6bfb34414a91311e7266044 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/pkg-cmake.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index db9fdebb8d..8c375779cb 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ From yann.morin.1998 at free.fr Sun Oct 30 19:19:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:19:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: MakeFiles -> Makefiles In-Reply-To: <20221030190028.3632333-1-james.hilliard1@gmail.com> References: <20221030190028.3632333-1-james.hilliard1@gmail.com> Message-ID: <20221030191907.GB1058960@scaer> James, All, On 2022-10-30 13:00 -0600, James Hilliard spake thusly: > Fixes: > CMake Error: Could not create named generator Unix MakeFiles > > Generators > Green Hills MULTI = Generates Green Hills MULTI files > (experimental, work-in-progress). > * Unix Makefiles = Generates standard UNIX makefiles. > Ninja = Generates build.ninja files. > Ninja Multi-Config = Generates build-.ninja files. > Watcom WMake = Generates Watcom WMake makefiles. > CodeBlocks - Ninja = Generates CodeBlocks project files. > CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. > CodeLite - Ninja = Generates CodeLite project files. > CodeLite - Unix Makefiles = Generates CodeLite project files. > Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. > Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. > Kate - Ninja = Generates Kate project files. > Kate - Unix Makefiles = Generates Kate project files. > Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. > Sublime Text 2 - Unix Makefiles > = Generates Sublime Text 2 project files. > > Signed-off-by: James Hilliard Good catch, thanks! Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/pkg-cmake.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index db9fdebb8d..8c375779cb 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > - -G"Unix MakeFiles" \ > + -G"Unix Makefiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > - -G"Unix MakeFiles" \ > + -G"Unix Makefiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:22:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:22:13 +0100 Subject: [Buildroot] [git commit] package/tinycompress: new package Message-ID: <20221030192451.8F07D875D0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2f02d159bb9eceabc1d0a3a4ffee97e726aad21d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master tinycompress is a library for compress audio offload in alsa. It also contains the "cplay" and "crecord" programs. tinycompress is part of the ALSA project. https://www.alsa-project.org/ Signed-off-by: Julien Olivain Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/Config.in | 1 + ...-wave-add-time.h-missing-header-inclusion.patch | 39 ++++++++++++++++++++++ package/tinycompress/Config.in | 10 ++++++ package/tinycompress/tinycompress.hash | 5 +++ package/tinycompress/tinycompress.mk | 13 ++++++++ 6 files changed, 69 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c4d23cd293..46c2820c4e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1685,6 +1685,7 @@ F: package/python-distro/ F: package/python-gnupg/ F: package/python-pyalsa/ F: package/riscv-isa-sim/ +F: package/tinycompress/ F: package/zynaddsubfx/ F: support/testing/tests/package/sample_python_distro.py F: support/testing/tests/package/sample_python_gnupg.py diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..d691471877 100644 --- a/package/Config.in +++ b/package/Config.in @@ -52,6 +52,7 @@ menu "Audio and video applications" source "package/pulseaudio/Config.in" source "package/sox/Config.in" source "package/squeezelite/Config.in" + source "package/tinycompress/Config.in" source "package/tovid/Config.in" source "package/tstools/Config.in" source "package/twolame/Config.in" diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch new file mode 100644 index 0000000000..4068a54074 --- /dev/null +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch @@ -0,0 +1,39 @@ +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 +From: Julien Olivain +Date: Sat, 29 Oct 2022 12:51:17 +0200 +Subject: [PATCH] wave: add missing header inclusion + +When compiling tinycompress with some libc other than glibc +(e.g. musl libc), compilation fails with the following error: + + In file included from wave.c:11:0: + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ + [...] + +According to POSIX, "struct timespec" is defined in . See: +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html + +This patch fixes this build failure by including prior +. + +Signed-off-by: Julien Olivain +--- + src/utils/wave.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/utils/wave.c b/src/utils/wave.c +index a74149a..d17f66a 100644 +--- a/src/utils/wave.c ++++ b/src/utils/wave.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + + #include "tinycompress/tinywave.h" +-- +2.38.1 + diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in new file mode 100644 index 0000000000..aff1943c78 --- /dev/null +++ b/package/tinycompress/Config.in @@ -0,0 +1,10 @@ +config BR2_PACKAGE_TINYCOMPRESS + bool "tinycompress" + depends on !BR2_STATIC_LIBS # dlfcn.h + help + tinycompress is a library for compress audio offload in alsa. + + https://www.alsa-project.org/ + +comment "tinycompress needs a toolchain w/ dynamic library" + depends on BR2_STATIC_LIBS diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash new file mode 100644 index 0000000000..164f3a36c3 --- /dev/null +++ b/package/tinycompress/tinycompress.hash @@ -0,0 +1,5 @@ +# Locally calculated after checking pgp signature +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 + +# Locally calculated +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk new file mode 100644 index 0000000000..062233ec80 --- /dev/null +++ b/package/tinycompress/tinycompress.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# tinycompress +# +################################################################################ + +TINYCOMPRESS_VERSION = 1.2.8 +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 +TINYCOMPRESS_LICENSE_FILES = COPYING + +$(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 19:25:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:25:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/tinycompress: new package In-Reply-To: <20221029115321.718694-1-ju.o@free.fr> References: <20221029115321.718694-1-ju.o@free.fr> Message-ID: <20221030192557.GC1058960@scaer> Julien, All, On 2022-10-29 13:53 +0200, Julien Olivain spake thusly: > tinycompress is a library for compress audio offload in alsa. > It also contains the "cplay" and "crecord" programs. > tinycompress is part of the ALSA project. And bizarrely enough, it does not depend on alsa-lib. Except for a tool, fcplay, that is disabled by default. > https://www.alsa-project.org/ > > Signed-off-by: Julien Olivain Applied to master, thanks. Regards, Yann E. MORIN. > --- > Tested on master branch, commit 014ec19 with commands: > > make check-package > ... > 0 warnings generated > > ./utils/test-pkg -a -p tinycompress > ... > 44 builds, 3 skipped, 1 build failed, 0 legal-info failed, 0 show-info failed > > Note: > The build failure is not related to this package. It is related to the > toolchain "bootlin-xtensa-uclibc" for which a fix was proposed in: > https://patchwork.ozlabs.org/project/buildroot/patch/20221010030937.6432-1-ju.o at free.fr/ > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > ...-add-time.h-missing-header-inclusion.patch | 39 +++++++++++++++++++ > package/tinycompress/Config.in | 10 +++++ > package/tinycompress/tinycompress.hash | 5 +++ > package/tinycompress/tinycompress.mk | 13 +++++++ > 6 files changed, 69 insertions(+) > create mode 100644 package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > create mode 100644 package/tinycompress/Config.in > create mode 100644 package/tinycompress/tinycompress.hash > create mode 100644 package/tinycompress/tinycompress.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index dac8fefd0b..df6b3f7b42 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1684,6 +1684,7 @@ F: package/python-distro/ > F: package/python-gnupg/ > F: package/python-pyalsa/ > F: package/riscv-isa-sim/ > +F: package/tinycompress/ > F: package/zynaddsubfx/ > F: support/testing/tests/package/sample_python_distro.py > F: support/testing/tests/package/sample_python_gnupg.py > diff --git a/package/Config.in b/package/Config.in > index e4eb2b7434..d691471877 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -52,6 +52,7 @@ menu "Audio and video applications" > source "package/pulseaudio/Config.in" > source "package/sox/Config.in" > source "package/squeezelite/Config.in" > + source "package/tinycompress/Config.in" > source "package/tovid/Config.in" > source "package/tstools/Config.in" > source "package/twolame/Config.in" > diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > new file mode 100644 > index 0000000000..4068a54074 > --- /dev/null > +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > @@ -0,0 +1,39 @@ > +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 > +From: Julien Olivain > +Date: Sat, 29 Oct 2022 12:51:17 +0200 > +Subject: [PATCH] wave: add missing header inclusion > + > +When compiling tinycompress with some libc other than glibc > +(e.g. musl libc), compilation fails with the following error: > + > + In file included from wave.c:11:0: > + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type > + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ > + [...] > + > +According to POSIX, "struct timespec" is defined in . See: > +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html > + > +This patch fixes this build failure by including prior > +. > + > +Signed-off-by: Julien Olivain > +--- > + src/utils/wave.c | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/src/utils/wave.c b/src/utils/wave.c > +index a74149a..d17f66a 100644 > +--- a/src/utils/wave.c > ++++ b/src/utils/wave.c > +@@ -8,6 +8,7 @@ > + #include > + #include > + #include > ++#include > + #include > + > + #include "tinycompress/tinywave.h" > +-- > +2.38.1 > + > diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in > new file mode 100644 > index 0000000000..aff1943c78 > --- /dev/null > +++ b/package/tinycompress/Config.in > @@ -0,0 +1,10 @@ > +config BR2_PACKAGE_TINYCOMPRESS > + bool "tinycompress" > + depends on !BR2_STATIC_LIBS # dlfcn.h > + help > + tinycompress is a library for compress audio offload in alsa. > + > + https://www.alsa-project.org/ > + > +comment "tinycompress needs a toolchain w/ dynamic library" > + depends on BR2_STATIC_LIBS > diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash > new file mode 100644 > index 0000000000..164f3a36c3 > --- /dev/null > +++ b/package/tinycompress/tinycompress.hash > @@ -0,0 +1,5 @@ > +# Locally calculated after checking pgp signature > +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 > + > +# Locally calculated > +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING > diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk > new file mode 100644 > index 0000000000..062233ec80 > --- /dev/null > +++ b/package/tinycompress/tinycompress.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# tinycompress > +# > +################################################################################ > + > +TINYCOMPRESS_VERSION = 1.2.8 > +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 > +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress > +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 > +TINYCOMPRESS_LICENSE_FILES = COPYING > + > +$(eval $(autotools-package)) > -- > 2.38.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:31:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:31:41 +0100 Subject: [Buildroot] [git commit] package/binutils: prevent selecting 2.37 for AVX512 systems Message-ID: <20221030193151.CA537875DD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a904fb2ac4b42386206fe9d86b2570442ab8540b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Support for the AVX512FP16 instructions was added in binutils 2.38. See the binutils 2.38 releases notes [0] that state: X86: [...] * Add support for Intel AVX512_FP16 instructions. [0] https://sourceware.org/pipermail/binutils/2022-February/119721.html It turns out that when building GCC 12.x, some of these AVX512FP16 instructions are now used, and therefore when binutils < 2.38 is used, the build fails as the assembler does not recognize those instructions: /tmp/ccChzL2g.s: Assembler messages: /tmp/ccChzL2g.s:20: Error: no such instruction: `vmovw 24(%esp),%xmm2' /tmp/ccChzL2g.s:21: Error: no such instruction: `vmovw 28(%esp),%xmm3' /tmp/ccChzL2g.s:22: Error: no such instruction: `vmovw 32(%esp),%xmm4' /tmp/ccChzL2g.s:23: Error: no such instruction: `vmovw 36(%esp),%xmm5' /tmp/ccChzL2g.s:30: Error: no such instruction: `vcvtsh2ss %xmm2,%xmm6,%xmm6' /tmp/ccChzL2g.s:36: Error: no such instruction: `vcvtsh2ss %xmm3,%xmm6,%xmm6' /tmp/ccChzL2g.s:42: Error: no such instruction: `vcvtsh2ss %xmm4,%xmm7,%xmm7' /tmp/ccChzL2g.s:48: Error: no such instruction: `vcvtsh2ss %xmm5,%xmm1,%xmm1' /tmp/ccChzL2g.s:80: Error: no such instruction: `vcvtss2sh (%esp),%xmm1,%xmm1' /tmp/ccChzL2g.s:96: Error: no such instruction: `vcvtss2sh (%esp),%xmm0,%xmm0' /tmp/ccChzL2g.s:100: Error: no such instruction: `vucomish %xmm1,%xmm1' /tmp/ccChzL2g.s:103: Error: no such instruction: `vucomish %xmm0,%xmm0' /tmp/ccChzL2g.s:122: Error: no such instruction: `vucomish %xmm2,%xmm2' The same issue does not occur with GCC 11.x, but nothing prevents other packages than GCC to use those instructions, so the problem really lies on the binutils side missing the support for those instructions. Also, in Buildroot, we do not distinguish AVX512 in general from AVX512FP16 specifically, so our only option is to make binutils 2.37 unavailable for AVX512 systems even if some of them perhaps don't support AVX512FP16 anyway. This seems like a reasonable trade-off, as binutils 2.38 is anyway already the default in Buildroot, and AVX512-capable systems are fairly recent, and therefore using a recent binutils version should not be a problem on these platforms. Fixes: http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN --- package/binutils/Config.in.host | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host index 51802db043..5dd2af2f9c 100644 --- a/package/binutils/Config.in.host +++ b/package/binutils/Config.in.host @@ -14,6 +14,9 @@ choice config BR2_BINUTILS_VERSION_2_37_X bool "binutils 2.37" + # AVX512FP16 instructions were not supported before binutils + # 2.38 + depends on !BR2_X86_CPU_HAS_AVX512 config BR2_BINUTILS_VERSION_2_38_X bool "binutils 2.38" From bernd.kuhls at t-online.de Sun Oct 30 19:33:06 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:06 +0100 Subject: [Buildroot] [PATCH v2 3/4] package/alsa-lib: bump version to 1.2.8 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-3-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls --- v2: no changes package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 659ec26ba3..a0a9617514 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:33:04 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:04 +0100 Subject: [Buildroot] [PATCH v2 1/4] package/alsa-lib: topology modules need dynamic library support Message-ID: <20221030193307.1190297-1-bernd.kuhls@t-online.de> With this new option we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls --- v2: added new Config.in option (Thomas) package/alsa-lib/Config.in | 5 ++ package/alsa-lib/alsa-lib.mk | 3 ++ ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- package/alsa-utils/alsa-utils.mk | 3 -- 4 files changed, 8 insertions(+), 51 deletions(-) delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in index af3de984d9..c6fb501d07 100644 --- a/package/alsa-lib/Config.in +++ b/package/alsa-lib/Config.in @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS bool "old-symbols" default y +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY + bool "topology" + depends on !BR2_STATIC_LIBS + default y + endif diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..659ec26ba3 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -58,6 +58,9 @@ endif ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) ALSA_LIB_CONF_OPTS += --disable-old-symbols endif +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) +ALSA_LIB_CONF_OPTS += --disable-topology +endif ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) ALSA_LIB_CONF_OPTS += \ diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 30 19:33:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:33:06 +0100 Subject: [Buildroot] [PATCH] package/binutils: prevent selecting 2.37 for AVX512 systems In-Reply-To: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> References: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030193306.GD1058960@scaer> Thomas, All, On 2022-10-26 19:54 +0200, Thomas Petazzoni via buildroot spake thusly: > Support for the AVX512FP16 instructions was added in binutils > 2.38. See the binutils 2.38 releases notes [0] that state: > X86: > [...] > * Add support for Intel AVX512_FP16 instructions. [--SNIP--] > Also, in Buildroot, we do not distinguish AVX512 in general from > AVX512FP16 specifically, so our only option is to make binutils 2.37 > unavailable for AVX512 systems even if some of them perhaps don't > support AVX512FP16 anyway. This seems like a reasonable trade-off, as > binutils 2.38 is anyway already the default in Buildroot, and > AVX512-capable systems are fairly recent, and therefore using a recent > binutils version should not be a problem on these platforms. ACK > Fixes: > > http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ > > Signed-off-by: Thomas Petazzoni Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/binutils/Config.in.host | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host > index 51802db043..5dd2af2f9c 100644 > --- a/package/binutils/Config.in.host > +++ b/package/binutils/Config.in.host > @@ -14,6 +14,9 @@ choice > > config BR2_BINUTILS_VERSION_2_37_X > bool "binutils 2.37" > + # AVX512FP16 instructions were not supported before binutils > + # 2.38 > + depends on !BR2_X86_CPU_HAS_AVX512 > > config BR2_BINUTILS_VERSION_2_38_X > bool "binutils 2.38" > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 30 19:33:07 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:07 +0100 Subject: [Buildroot] [PATCH v2 4/4] package/alsa-utils: bump version to 1.2.8 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-4-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 due to upstream removal of UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls --- v2: no changes ...ay-aplay.c-make-UCM-support-optional.patch | 89 ------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) delete mode 100644 package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:33:05 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:05 +0100 Subject: [Buildroot] [PATCH v2 2/4] package/alsa-plugins: bump version to 1.2.7.1 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-2-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls --- v2: no changes package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 30 19:33:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:33:38 +0100 Subject: [Buildroot] [git commit] package/musl: fixup the dynamic loader symlink Message-ID: <20221030193716.A9F19875E6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7935e427bce601f16ee194978583e533213f78c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The musl Makefile installs the dynamic loader as a symlink to libc.so with the following rule: $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so $(INSTALL) -D -l $(libdir)/libc.so $@ || true While it works, the drawback is that ld-musl-.so ends up being a symlink to /lib/libc.so. While it works on the target, it means we have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as /lib/libc.so doesn't make sense on the build machine. This generally doesn't cause any problem *except* when we tell Qemu to use $(STAGING_DIR) as the library directory when running target programs through the Qemu user emulation mode. This is for example node inside the NodeJS build. Due to this broken symlink, Qemu can't find libc.so that is pointed to be the dynamic loader symlink causing this build error: qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory Since this is not really a bug in the musl build system, we address this issue by overriding the symlink to be a relative path. The dynamic loader is always installed in /lib, and libc.so is also always installed in /lib because we pass libdir=/lib when configuring musl. So we can simply have a ld-musl* -> libc.so symbolic link. We use ld-musl* as a wildcard so that we don't need to have extra logic to determine the exact name of the dynamic loader symlink, and simply override the one that exists. Fixes: http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ https://bugs.busybox.net/show_bug.cgi?id=15061 Note that, for external toolchain, we already have a generic fixup that makes symlinks relative [0]. So in the external toolchain, even if the symlink is broken, it gets fixed when we import the toolchain into STAGING_DIR. [0] https://lore.kernel.org/buildroot/20221026205312.3f729eb8 at windsurf/ Cc: hello.skyclo at gmail.com Signed-off-by: Thomas Petazzoni [yann.morin.1998 at free.fr: - add summary of Thomas' explanations for external toolchains ] Signed-off-by: Yann E. MORIN --- package/musl/musl.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/musl/musl.mk b/package/musl/musl.mk index 44c79da6f7..30c3c2fbc0 100644 --- a/package/musl/musl.mk +++ b/package/musl/musl.mk @@ -60,12 +60,14 @@ endef define MUSL_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* endef define MUSL_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(TARGET_DIR) install-libs $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* endef $(eval $(generic-package)) From yann.morin.1998 at free.fr Sun Oct 30 19:38:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:38:23 +0100 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030193822.GE1058960@scaer> Thomas, All, On 2022-10-26 14:58 +0200, Thomas Petazzoni via buildroot spake thusly: > The musl Makefile installs the dynamic loader as a symlink to libc.so > with the following rule: > > $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so > $(INSTALL) -D -l $(libdir)/libc.so $@ || true > > While it works, the drawback is that ld-musl-.so ends up being a > symlink to /lib/libc.so. While it works on the target, it means we > have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as > /lib/libc.so doesn't make sense on the build machine. This generally > doesn't cause any problem *except* when we tell Qemu to use > $(STAGING_DIR) as the library directory when running target programs > through the Qemu user emulation mode. This is for example node inside > the NodeJS build. Due to this broken symlink, Qemu can't find libc.so > that is pointed to be the dynamic loader symlink causing this build > error: > > qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory > > Since this is not really a bug in the musl build system, we address > this issue by overriding the symlink to be a relative path. The > dynamic loader is always installed in /lib, and libc.so is also always > installed in /lib because we pass libdir=/lib when configuring > musl. So we can simply have a ld-musl* -> libc.so symbolic link. We > use ld-musl* as a wildcard so that we don't need to have extra logic > to determine the exact name of the dynamic loader symlink, and simply > override the one that exists. > > Fixes: > > http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ > https://bugs.busybox.net/show_bug.cgi?id=15061 > > Cc: hello.skyclo at gmail.com > Signed-off-by: Thomas Petazzoni Applied to master, after adding a summary of the explanations you provided Yann about the external toolchain case. Thanks. Regards, Yann E. MORIN. > --- > package/musl/musl.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/musl/musl.mk b/package/musl/musl.mk > index 44c79da6f7..30c3c2fbc0 100644 > --- a/package/musl/musl.mk > +++ b/package/musl/musl.mk > @@ -60,12 +60,14 @@ endef > define MUSL_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers > + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* > endef > > define MUSL_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(TARGET_DIR) install-libs > $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) > + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* > endef > > $(eval $(generic-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:40:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:19 +0100 Subject: [Buildroot] [git commit] package/alsa-plugins: bump version to 1.2.7.1 Message-ID: <20221030194324.C4DA187605@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9597126a3d83ddf7871688ac4de5d2e065c508f0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ From yann.morin.1998 at free.fr Sun Oct 30 19:40:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:21 +0100 Subject: [Buildroot] [git commit] package/alsa-lib: bump version to 1.2.8 Message-ID: <20221030194324.CEC3787607@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9b97b3e3bcdc5a099fdaef84ce1d131dbe6a3e79 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 659ec26ba3..a0a9617514 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) From yann.morin.1998 at free.fr Sun Oct 30 19:40:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:23 +0100 Subject: [Buildroot] [git commit] package/alsa-utils: bump version to 1.2.8 Message-ID: <20221030194324.D8AE387608@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c967d184d116a6eae9243e718b19e904582a686 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 due to upstream removal of UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- ...2-aplay-aplay.c-make-UCM-support-optional.patch | 89 ---------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 From yann.morin.1998 at free.fr Sun Oct 30 19:39:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:39:54 +0100 Subject: [Buildroot] [git commit] package/alsa-lib: topology modules need dynamic library support Message-ID: <20221030194324.BB43F87604@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=28497102e1788df3628bd3324a3304a03c7942d0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master With this new option we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-lib/Config.in | 5 +++ package/alsa-lib/alsa-lib.mk | 3 ++ ...03-configure.ac-fix-build-without-dlfcn.h.patch | 48 ---------------------- package/alsa-utils/alsa-utils.mk | 3 -- 4 files changed, 8 insertions(+), 51 deletions(-) diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in index af3de984d9..447916a29f 100644 --- a/package/alsa-lib/Config.in +++ b/package/alsa-lib/Config.in @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS bool "old-symbols" default y +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY + bool "topology" + default y + depends on !BR2_STATIC_LIBS + endif diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..659ec26ba3 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -58,6 +58,9 @@ endif ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) ALSA_LIB_CONF_OPTS += --disable-old-symbols endif +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) +ALSA_LIB_CONF_OPTS += --disable-topology +endif ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) ALSA_LIB_CONF_OPTS += \ diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif From yann.morin.1998 at free.fr Sun Oct 30 19:43:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:43:19 +0100 Subject: [Buildroot] [PATCH v2 1/4] package/alsa-lib: topology modules need dynamic library support In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030194319.GF1058960@scaer> Bernd, All, On 2022-10-30 20:33 +0100, Bernd Kuhls spake thusly: > With this new option we can remove a patch from alsa-utils which fixed > its static build. A static build of topology modules is not supported > by upstream however: > > "Note that it does not make sense to build static topology modules. > They are not usable." > https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 > > Signed-off-by: Bernd Kuhls > --- [--SNIP--] > diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in > index af3de984d9..c6fb501d07 100644 > --- a/package/alsa-lib/Config.in > +++ b/package/alsa-lib/Config.in > @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS > bool "old-symbols" > default y > > +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY > + bool "topology" > + depends on !BR2_STATIC_LIBS > + default y $ make check-package package/alsa-lib/Config.in:86: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files) Applied to master with the above fixed, thanks. Rest of the series also applied to master, thanks Regards, Yann E. MORIN. > endif > diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk > index f3ed195a5c..659ec26ba3 100644 > --- a/package/alsa-lib/alsa-lib.mk > +++ b/package/alsa-lib/alsa-lib.mk > @@ -58,6 +58,9 @@ endif > ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) > ALSA_LIB_CONF_OPTS += --disable-old-symbols > endif > +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) > +ALSA_LIB_CONF_OPTS += --disable-topology > +endif > > ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) > ALSA_LIB_CONF_OPTS += \ > diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > deleted file mode 100644 > index 69dae5102c..0000000000 > --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > +++ /dev/null > @@ -1,48 +0,0 @@ > -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sun, 14 Aug 2022 20:31:30 +0200 > -Subject: [PATCH] configure.ac: fix build without dlfcn.h > - > -Fix the following static build failure (i.e. without dlfcn.h) raised > -since version 1.2.7 and > -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: > - > -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory > - 28 | #include > - | ^~~~~~~~~ > - > -Fixes: > - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] > ---- > - configure.ac | 5 ++++- > - 1 file changed, 4 insertions(+), 1 deletion(-) > - > -diff --git a/configure.ac b/configure.ac > -index 20cbb68..6833800 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], > - , [AC_ERROR([No user enum control support in alsa-lib])]) > - fi > - > -+ > -+AC_CHECK_HEADERS([dlfcn.h]) > -+ > - dnl Check components > - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], > - [#include ]) > -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") > - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") > - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") > - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") > --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") > -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") > - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") > - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") > - > --- > -2.35.1 > - > diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk > index 1b16a2457a..65a7853c79 100644 > --- a/package/alsa-utils/alsa-utils.mk > +++ b/package/alsa-utils/alsa-utils.mk > @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ > $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ > $(TARGET_NLS_DEPENDENCIES) > > -# We're patching configure.ac > -ALSA_UTILS_AUTORECONF = YES > - > ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) > ALSA_UTILS_SELINUX_MODULES += alsa > endif > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 30 19:44:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:44:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/flac: bump version to 1.4.2 Message-ID: <20221030194423.1208535-1-bernd.kuhls@t-online.de> Changelog: https://xiph.org/flac/changelog.html Switched _SITE to https and update project URL. Upstream removed the dependency to host-nasm: https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 Signed-off-by: Bernd Kuhls --- package/flac/Config.in | 2 +- package/flac/flac.hash | 4 ++-- package/flac/flac.mk | 11 ++--------- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/package/flac/Config.in b/package/flac/Config.in index 267acb7f34..62aca290fe 100644 --- a/package/flac/Config.in +++ b/package/flac/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC help FLAC is an Open Source lossless audio codec. - http://flac.sourceforge.net/ + https://xiph.org/flac/ comment "flac needs a toolchain w/ wchar" depends on !BR2_USE_WCHAR diff --git a/package/flac/flac.hash b/package/flac/flac.hash index 1f7763fd6e..b993ebd759 100644 --- a/package/flac/flac.hash +++ b/package/flac/flac.hash @@ -1,5 +1,5 @@ -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL diff --git a/package/flac/flac.mk b/package/flac/flac.mk index 91d5840d72..ebb4778521 100644 --- a/package/flac/flac.mk +++ b/package/flac/flac.mk @@ -4,8 +4,8 @@ # ################################################################################ -FLAC_VERSION = 1.4.0 -FLAC_SITE = http://downloads.xiph.org/releases/flac +FLAC_VERSION = 1.4.2 +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz FLAC_INSTALL_STAGING = YES FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) @@ -27,11 +27,4 @@ else FLAC_CONF_OPTS += --disable-ogg endif -ifeq ($(BR2_X86_CPU_HAS_SSE),y) -FLAC_DEPENDENCIES += host-nasm -FLAC_CONF_OPTS += --enable-sse -else -FLAC_CONF_OPTS += --disable-sse -endif - $(eval $(autotools-package)) -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:45:19 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:45:19 +0100 Subject: [Buildroot] [PATCH 2/2] package/intel-mediasdk: bump version to 22.6.0 In-Reply-To: <20221030194519.1208612-1-bernd.kuhls@t-online.de> References: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Message-ID: <20221030194519.1208612-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index 25894aea63..da4286ae23 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz +sha256 21a54b752c6b84f032b53a3e328d29f05a448b39f4c18f75fe4e79bb219dc40e intel-mediasdk-22.6.0.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index 4080188dc5..30fddfbcfd 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.4 +INTEL_MEDIASDK_VERSION = 22.6.0 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:45:18 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:45:18 +0100 Subject: [Buildroot] [PATCH 1/2] package/intel-mediadriver: bump version to 22.6.0 Message-ID: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 35e4c97c7c..d1698cbfb5 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index c2d480fa21..821c0920f4 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.4 +INTEL_MEDIADRIVER_VERSION = 22.6.0 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 30 19:54:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 13:54:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pillow: bump to version 9.3.0 Message-ID: <20221030195404.1221968-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pillow/python-pillow.hash | 4 ++-- package/python-pillow/python-pillow.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash index 0e407bd55c..46da25dddc 100644 --- a/package/python-pillow/python-pillow.hash +++ b/package/python-pillow/python-pillow.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pillow/json -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz # Locally computed sha256 checksums sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk index 31725a3e46..5ea9fcf264 100644 --- a/package/python-pillow/python-pillow.mk +++ b/package/python-pillow/python-pillow.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_PILLOW_VERSION = 9.2.0 -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed +PYTHON_PILLOW_VERSION = 9.3.0 +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz PYTHON_PILLOW_LICENSE = HPND PYTHON_PILLOW_LICENSE_FILES = LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 20:04:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:04:21 +0100 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: <20221030210421.6c2777b2@windsurf> On Mon, 17 Oct 2022 22:18:04 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > DEVELOPERS | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. However, please *always* resend complete patch series. For PATCH 1/2, you had sent a v2, and then a v3, and for this PATCH 2/2, only a v1 was there. This is *extremely* confusing for the maintainers. So when you need to send a new version of one patch in a patch series, please *always* resend the complete patch series, and mark the entire previous patch series as Superseded. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:04:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:04:27 +0100 Subject: [Buildroot] [PATCH v3] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> References: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030210427.659402eb@windsurf> On Tue, 18 Oct 2022 15:39:36 +0200 Giulio Benetti wrote: > Note that we use latest commit from branch v5.2.2.4 instead of > branch master. > > Fixes: > http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > Signed-off-by: Giulio Benetti > Reviewed-by: Petr Vorel > Reviewed-by: Luca Ceresoli > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy > V2->V3: > * use latest commit since it's been fixed and improve commit log as pointed by > Peter Seiderer > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:15 +0100 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> References: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030210615.49866828@windsurf> On Wed, 19 Oct 2022 15:48:23 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. > > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti > --- > V1->V2: > * improve Config.in description as pointed by Luca Ceresoli > --- > package/rtl8188eu/Config.in | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > index 76d9085297..2fab1fd5c0 100644 > --- a/package/rtl8188eu/Config.in > +++ b/package/rtl8188eu/Config.in > @@ -4,9 +4,10 @@ config BR2_PACKAGE_RTL8188EU > depends on BR2_LINUX_KERNEL > help > A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. > + This rtl8188eu driver is not the same as the one in mainline > + Linux that still has pending work to be done that in this > + driver is done, check: > + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO I don't see any thing in this TODO that explains why the out-of-tree driver is better than the mainline driver. The out-of-tree driver has been integrated into drivers/staging/, and this TODO file lists what should be improved in the driver so that it can be graduated to move outside of drivers/staging/ into the proper drivers/net/wireless/ location. I don't see anything in this TODO that indicates that the out-of-tree driver has "more features" than the mainline driver, so to me the Config.in help text still makes sense. Could you give some more details? Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:49 +0100 Subject: [Buildroot] [git commit] DEVELOPERS: add Giulio Benetti to rtl8188eu package Message-ID: <20221030201810.DD5D987616@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d64fff456890941f6bbe220d37f021437e0e0d0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Reviewed-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 46c2820c4e..b8b78976a4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1153,6 +1153,7 @@ F: package/nfs-utils/ F: package/python-uvloop/ F: package/qt5/ F: package/rockchip-mali/ +F: package/rtl8188eu/ F: package/rtl8189es/ F: package/rtl8723bu/ F: package/rtl8723ds/ From thomas.petazzoni at bootlin.com Sun Oct 30 20:10:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:10:16 +0100 Subject: [Buildroot] [git commit] package/uuu: bump to version 1.5.4 Message-ID: <20221030201810.EFD3B87618@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fed7c4406aa07f1fb99bad5d5669f8562eb6e6b9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix memory leak cause by getaddrinfo - Fix crash when last block actual size < m_output_size - Add -dm to disable small memory for debug purpose - Fix a dead lock when reset stream - Stop http download when error happen - Add error check for all request_data - Fix linux build warning - Add gzip stream support - Rework buffer management to support small memory version - Fix support of empty environment variables in Windows OS - Fix crash when environment variable is last word in script - Fix update libusb path - Update libusb submodule - Drop vs2017 support. - Use $(DefaultPlatformToolset) - Try remove PlatformToolset and set WindowsTargetPlatformVersion to 10.0 Signed-off-by: Dario Binacchi Signed-off-by: Thomas Petazzoni --- package/uuu/uuu.hash | 2 +- package/uuu/uuu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uuu/uuu.hash b/package/uuu/uuu.hash index de00c649b1..50da0f9bf3 100644 --- a/package/uuu/uuu.hash +++ b/package/uuu/uuu.hash @@ -1,4 +1,4 @@ # locally computed -sha256 9fcfe317c379be1e274aae34c19e1fd57188107f8fd0cdd379fe4473aacc92b1 uuu_source-1.4.243.tar.gz +sha256 baaf3e031958075b96530d43d7435f19cb428088894066e0b02349a3b9666666 uuu_source-1.5.4.tar.gz sha256 cc8d47f7b9260f6669ecd41c24554c552f17581d81ee8fc602c6d23edb8bf495 LICENSE sha256 584bfbb18b4c08b872d48b80419dd453307212a144134fb516bd6ddc0700c2e8 README.md diff --git a/package/uuu/uuu.mk b/package/uuu/uuu.mk index 7ed2599598..681c1fbc44 100644 --- a/package/uuu/uuu.mk +++ b/package/uuu/uuu.mk @@ -4,7 +4,7 @@ # ################################################################################ -UUU_VERSION = 1.4.243 +UUU_VERSION = 1.5.4 UUU_SOURCE = uuu_source-$(UUU_VERSION).tar.gz UUU_SITE = https://github.com/NXPmicro/mfgtools/releases/download/uuu_$(UUU_VERSION) UUU_LICENSE = BSD 3-Clause "New" or "Revised" License From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:49 +0100 Subject: [Buildroot] [git commit] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221030201810.E5CD987603@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ba74bc8b6783aa478d00f3318c13064d66274ca9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Note that we use latest commit from branch v5.2.2.4 instead of branch master. Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti Reviewed-by: Petr Vorel Reviewed-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..0ad7786328 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 50529c110e0a45fbe3169d0e237c4d0959300840f5e162c24256452976fb2670 rtl8188eu-c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..199362d7ae 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING From bugzilla at busybox.net Sun Oct 30 20:19:22 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Sun, 30 Oct 2022 20:19:22 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #3 from Thomas Petazzoni --- Fixed by https://gitlab.com/buildroot.org/buildroot/-/commit/7935e427bce601f16ee194978583e533213f78c6 -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Sun Oct 30 20:20:05 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Sun, 30 Oct 2022 20:20:05 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |WONTFIX -- You are receiving this mail because: You are on the CC list for the bug. From yann.morin.1998 at free.fr Sun Oct 30 20:22:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:38 +0100 Subject: [Buildroot] [git commit] package/python-pluggy: enable host package build Message-ID: <20221030202515.A71278764C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=47504a72e8a6526258516fdc35122494a4d4b529 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This will be needed for the upcoming host-python-hatchling. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-pluggy/python-pluggy.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk index 59382518ed..6dc6f970ea 100644 --- a/package/python-pluggy/python-pluggy.mk +++ b/package/python-pluggy/python-pluggy.mk @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools PYTHON_PLUGGY_LICENSE = MIT PYTHON_PLUGGY_LICENSE_FILES = LICENSE PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm $(eval $(python-package)) +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:44 +0100 Subject: [Buildroot] [git commit] package/python-hatchling: new package Message-ID: <20221030202515.C856A8764F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=626c5bedaa7e1461dd3747562b9c04dd40713c83 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a new pep517 based build backend. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-hatchling/python-hatchling.hash | 5 +++++ package/python-hatchling/python-hatchling.mk | 19 +++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 2c33726c77..1a38b329c3 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1385,6 +1385,7 @@ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ +F: package/python-hatchling/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatchling/python-hatchling.hash b/package/python-hatchling/python-hatchling.hash new file mode 100644 index 0000000000..41d7be977e --- /dev/null +++ b/package/python-hatchling/python-hatchling.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatchling/json +md5 e06cc65ac646f9b01df5406aa1f97022 hatchling-1.11.1.tar.gz +sha256 9f84361f70cf3a7ab9543b0c3ecc64211ed2ba8a606a71eb6a473c1c9b08e1d0 hatchling-1.11.1.tar.gz +# Locally computed sha256 checksums +sha256 7f143a8127ad4873862d70854b5bd2abd0085aa73e64fd2b08704a3b9f5c07fc LICENSE.txt diff --git a/package/python-hatchling/python-hatchling.mk b/package/python-hatchling/python-hatchling.mk new file mode 100644 index 0000000000..13155a20a4 --- /dev/null +++ b/package/python-hatchling/python-hatchling.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# python-hatchling +# +################################################################################ + +PYTHON_HATCHLING_VERSION = 1.11.1 +PYTHON_HATCHLING_SOURCE = hatchling-$(PYTHON_HATCHLING_VERSION).tar.gz +PYTHON_HATCHLING_SITE = https://files.pythonhosted.org/packages/24/20/3e21d2bc57229822ac9fb9b314d7892c16f829f34a0eb247c55fc11e09a8 +PYTHON_HATCHLING_LICENSE = MIT +PYTHON_HATCHLING_LICENSE_FILES = LICENSE.txt +PYTHON_HATCHLING_SETUP_TYPE = pep517 +HOST_PYTHON_HATCHLING_DEPENDENCIES = \ + host-python-editables \ + host-python-packaging \ + host-python-pathspec \ + host-python-pluggy + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:40 +0100 Subject: [Buildroot] [git commit] package/python-editables: new package Message-ID: <20221030202515.B23978764D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6d70fac1350a88a8e0e87d0d1b0bcf80eeeb5cf3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-editables/python-editables.hash | 5 +++++ package/python-editables/python-editables.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index b8b78976a4..2047b77b82 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1380,6 +1380,7 @@ F: package/python-cbor2/ F: package/python-cchardet/ F: package/python-charset-normalizer/ F: package/python-cssselect2/ +F: package/python-editables/ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ diff --git a/package/python-editables/python-editables.hash b/package/python-editables/python-editables.hash new file mode 100644 index 0000000000..3c28c44cc3 --- /dev/null +++ b/package/python-editables/python-editables.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/editables/json +md5 e91709fbb0ef586cb7b785042068ab67 editables-0.3.tar.gz +sha256 167524e377358ed1f1374e61c268f0d7a4bf7dbd046c656f7b410cde16161b1a editables-0.3.tar.gz +# Locally computed sha256 checksums +sha256 c73e08a04e1557fdb49525fb7a579f73bcab84a254910b9350ee56daf143932d LICENSE.txt diff --git a/package/python-editables/python-editables.mk b/package/python-editables/python-editables.mk new file mode 100644 index 0000000000..db67e7a16d --- /dev/null +++ b/package/python-editables/python-editables.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-editables +# +################################################################################ + +PYTHON_EDITABLES_VERSION = 0.3 +PYTHON_EDITABLES_SOURCE = editables-$(PYTHON_EDITABLES_VERSION).tar.gz +PYTHON_EDITABLES_SITE = https://files.pythonhosted.org/packages/01/b0/a2a87db4b6cb8e7d57004b6836faa634e0747e3e39ded126cdbe5a33ba36 +PYTHON_EDITABLES_LICENSE = MIT +PYTHON_EDITABLES_LICENSE_FILES = LICENSE.txt +PYTHON_EDITABLES_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:46 +0100 Subject: [Buildroot] [git commit] package/python-hatch-fancy-pypi-readme: new package Message-ID: <20221030202515.D30E48764C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=31e5453c06146233453d35121089d26606c25341 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + .../python-hatch-fancy-pypi-readme.hash | 5 +++++ .../python-hatch-fancy-pypi-readme.mk | 15 +++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1a38b329c3..02211b7bf4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1386,6 +1386,7 @@ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ +F: package/python-hatch-fancy-pypi-readme/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash new file mode 100644 index 0000000000..1b287072b7 --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_fancy_pypi_readme/json +md5 588776ea8e3608714d4cbba16dffa92b hatch_fancy_pypi_readme-22.8.0.tar.gz +sha256 da91282ca09601c18aded8e378daf8b578c70214866f0971156ee9bb9ce6c26a hatch_fancy_pypi_readme-22.8.0.tar.gz +# Locally computed sha256 checksums +sha256 e69ea57f96e599e617f61af3e85bf326b87e833994709fb5e5908a81197730a2 LICENSE.txt diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk new file mode 100644 index 0000000000..f28721181a --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk @@ -0,0 +1,15 @@ +################################################################################ +# +# python-hatch-fancy-pypi-readme +# +################################################################################ + +PYTHON_HATCH_FANCY_PYPI_README_VERSION = 22.8.0 +PYTHON_HATCH_FANCY_PYPI_README_SOURCE = hatch_fancy_pypi_readme-$(PYTHON_HATCH_FANCY_PYPI_README_VERSION).tar.gz +PYTHON_HATCH_FANCY_PYPI_README_SITE = https://files.pythonhosted.org/packages/4e/ab/9b48589d6e3a2f72cc1e8f5221c28ff28fcdf116dbbd6e9beb946054212d +PYTHON_HATCH_FANCY_PYPI_README_LICENSE = MIT +PYTHON_HATCH_FANCY_PYPI_README_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_FANCY_PYPI_README_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_FANCY_PYPI_README_DEPENDENCIES = host-python-hatchling + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:42 +0100 Subject: [Buildroot] [git commit] package/python-pathspec: new packages Message-ID: <20221030202515.BD7838764E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb9906b1290b11cd9f159f493b199c0d4e0d1102 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-pathspec/python-pathspec.hash | 5 +++++ package/python-pathspec/python-pathspec.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 2047b77b82..2c33726c77 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1391,6 +1391,7 @@ F: package/python-logstash/ F: package/python-maturin/ F: package/python-multidict/ F: package/python-mypy-extensions/ +F: package/python-pathspec/ F: package/python-pep517/ F: package/python-pycares/ F: package/python-pydyf/ diff --git a/package/python-pathspec/python-pathspec.hash b/package/python-pathspec/python-pathspec.hash new file mode 100644 index 0000000000..91e4fb85b7 --- /dev/null +++ b/package/python-pathspec/python-pathspec.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/pathspec/json +md5 6f4fde5e701d328a2846d206edb63aa9 pathspec-0.10.1.tar.gz +sha256 7ace6161b621d31e7902eb6b5ae148d12cfd23f4a249b9ffb6b9fee12084323d pathspec-0.10.1.tar.gz +# Locally computed sha256 checksums +sha256 fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85 LICENSE diff --git a/package/python-pathspec/python-pathspec.mk b/package/python-pathspec/python-pathspec.mk new file mode 100644 index 0000000000..ccb794cce9 --- /dev/null +++ b/package/python-pathspec/python-pathspec.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pathspec +# +################################################################################ + +PYTHON_PATHSPEC_VERSION = 0.10.1 +PYTHON_PATHSPEC_SOURCE = pathspec-$(PYTHON_PATHSPEC_VERSION).tar.gz +PYTHON_PATHSPEC_SITE = https://files.pythonhosted.org/packages/24/9f/a9ae1e6efa11992dba2c4727d94602bd2f6ee5f0dedc29ee2d5d572c20f7 +PYTHON_PATHSPEC_LICENSE = MPL-2.0 +PYTHON_PATHSPEC_LICENSE_FILES = LICENSE +PYTHON_PATHSPEC_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:48 +0100 Subject: [Buildroot] [git commit] package/python-hatch-vcs: new package Message-ID: <20221030202515.DFC6E8764D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7c488ef830655c6084ac59e75ff1a3b046a5e1c2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-hatch-vcs/python-hatch-vcs.hash | 5 +++++ package/python-hatch-vcs/python-hatch-vcs.mk | 17 +++++++++++++++++ 3 files changed, 23 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 02211b7bf4..f82a23b83e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1387,6 +1387,7 @@ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ F: package/python-hatch-fancy-pypi-readme/ +F: package/python-hatch-vcs/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-vcs/python-hatch-vcs.hash b/package/python-hatch-vcs/python-hatch-vcs.hash new file mode 100644 index 0000000000..e57eeddd2f --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_vcs/json +md5 e56b6d0c05cfb9b59d493c67f94d6e48 hatch_vcs-0.2.0.tar.gz +sha256 9913d733b34eec9bb0345d0626ca32165a4ad2de15d1ce643c36d09ca908abff hatch_vcs-0.2.0.tar.gz +# Locally computed sha256 checksums +sha256 117aa5006d8475562f04442ab06dd2a4c501af3a77255eae0deef1f0c2499a1a LICENSE.txt diff --git a/package/python-hatch-vcs/python-hatch-vcs.mk b/package/python-hatch-vcs/python-hatch-vcs.mk new file mode 100644 index 0000000000..55c6461751 --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.mk @@ -0,0 +1,17 @@ +################################################################################ +# +# python-hatch-vcs +# +################################################################################ + +PYTHON_HATCH_VCS_VERSION = 0.2.0 +PYTHON_HATCH_VCS_SOURCE = hatch_vcs-$(PYTHON_HATCH_VCS_VERSION).tar.gz +PYTHON_HATCH_VCS_SITE = https://files.pythonhosted.org/packages/ac/13/b3d83564c0cc0f1d45b4ea2a78b87b383a8165797613fedf11f1a7e49b48 +PYTHON_HATCH_VCS_LICENSE = MIT +PYTHON_HATCH_VCS_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_VCS_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_VCS_DEPENDENCIES = \ + host-python-hatchling \ + host-python-setuptools-scm + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:50 +0100 Subject: [Buildroot] [git commit] package/python-jsonschema: bump to version 4.16.0 Message-ID: <20221030202515.E8BDA8764E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=146e5a1b218b154f844058e24ccc94a3e341c34e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Migrate to new pep517 based hatchling build system. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-jsonschema/python-jsonschema.hash | 4 ++-- package/python-jsonschema/python-jsonschema.mk | 10 +++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/package/python-jsonschema/python-jsonschema.hash b/package/python-jsonschema/python-jsonschema.hash index a2766f78cc..d4c2759811 100644 --- a/package/python-jsonschema/python-jsonschema.hash +++ b/package/python-jsonschema/python-jsonschema.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/jsonschema/json -md5 c3f7a29c187bf1d038c66a5d5763eab1 jsonschema-4.5.1.tar.gz -sha256 7c6d882619340c3347a1bf7315e147e6d3dae439033ae6383d6acb908c101dfc jsonschema-4.5.1.tar.gz +md5 3bc1f63a74fc61bf2847f22cadb0dfff jsonschema-4.16.0.tar.gz +sha256 165059f076eff6971bae5b742fc029a7b4ef3f9bcf04c14e4776a7605de14b23 jsonschema-4.16.0.tar.gz # Locally computed sha256 checksums sha256 4f92a015a13c4d1a040bef018aa13430b4f1bc73b41b16bb846c346766de7439 COPYING sha256 837402bd25fad9b704265801ca3f92566a98157c1f9a7acd6f446299ba1c305a json/LICENSE diff --git a/package/python-jsonschema/python-jsonschema.mk b/package/python-jsonschema/python-jsonschema.mk index 013a5c1293..68a25aed58 100644 --- a/package/python-jsonschema/python-jsonschema.mk +++ b/package/python-jsonschema/python-jsonschema.mk @@ -4,11 +4,15 @@ # ################################################################################ -PYTHON_JSONSCHEMA_VERSION = 4.5.1 +PYTHON_JSONSCHEMA_VERSION = 4.16.0 PYTHON_JSONSCHEMA_SOURCE = jsonschema-$(PYTHON_JSONSCHEMA_VERSION).tar.gz -PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/9e/62/93a54db0e44c4de57868a7d638d7a8abce113c8bc43a20b10b1109b2a517 -PYTHON_JSONSCHEMA_SETUP_TYPE = setuptools +PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/cf/54/8923ba38b5145f2359d57e5516715392491d674c83f446cd4cd133eeb4d6 +PYTHON_JSONSCHEMA_SETUP_TYPE = pep517 PYTHON_JSONSCHEMA_LICENSE = MIT PYTHON_JSONSCHEMA_LICENSE_FILES = COPYING json/LICENSE +PYTHON_JSONSCHEMA_DEPENDENCIES = \ + host-python-hatchling \ + host-python-hatch-fancy-pypi-readme \ + host-python-hatch-vcs $(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:26:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:26:29 +0100 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring In-Reply-To: <20221014230905.3091021-1-james.hilliard1@gmail.com> References: <20221014230905.3091021-1-james.hilliard1@gmail.com> Message-ID: <20221030212629.51bf650e@windsurf> Hello James, On Fri, 14 Oct 2022 17:09:05 -0600 James Hilliard wrote: > +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) I must be missing something, but why is -$(MAKEFLAGS) used and not just $(MAKEFLAGS) ? Indeed, with "make -s --debug -k", $(MAKEFLAGS) is "ks --debug=all", and therefore $(firstword $(MAKEFLAGS)) is ks, which is good enough for the findstring s, no? Why is adding a - in front needed? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Sun Oct 30 20:27:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:27:18 +0100 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221030202718.GG1058960@scaer> James, All, On 2022-10-19 15:53 -0600, James Hilliard spake thusly: > This will be needed for the upcoming host-python-hatchling. > > Signed-off-by: James Hilliard Whole series applied to master, thanks. I really wonder how many pep517 buildsystems there will be, and how many packages we'll have to introduce... Fantastic... Regards, Yann E. MORIN. > --- > package/python-pluggy/python-pluggy.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk > index 59382518ed..6dc6f970ea 100644 > --- a/package/python-pluggy/python-pluggy.mk > +++ b/package/python-pluggy/python-pluggy.mk > @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools > PYTHON_PLUGGY_LICENSE = MIT > PYTHON_PLUGGY_LICENSE_FILES = LICENSE > PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > $(eval $(python-package)) > +$(eval $(host-python-package)) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 20:29:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:29:20 +0100 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221015005813.4055238-1-james.hilliard1@gmail.com> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: <20221030212920.3dd30baa@windsurf> Hello James, On Fri, 14 Oct 2022 18:58:13 -0600 James Hilliard wrote: > The bearssl package is not compatible with parallel builds. > > Fixes: > - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > Signed-off-by: James Hilliard > --- > package/bearssl/bearssl.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Based on the feedback which said that fixing bearssl was preferred over using $(MAKE1), I have marked this patch as Changes Requested. Could you see at fixing the bearssl build system, submit the fix upstream, and provide the fix for Buildroot? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:35:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:35:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package In-Reply-To: <20221014200918.2816609-1-james.hilliard1@gmail.com> References: <20221014200918.2816609-1-james.hilliard1@gmail.com> Message-ID: <20221030213547.2ddf9fc7@windsurf> On Fri, 14 Oct 2022 14:09:18 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > Changes v1 -> v2: > - update to latest 5.11.2.1 version fixing issues on latest kernel > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > package/rtl8192eu/Config.in | 13 +++++++++++++ > package/rtl8192eu/rtl8192eu.hash | 2 ++ > package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ > 5 files changed, 40 insertions(+) > create mode 100644 package/rtl8192eu/Config.in > create mode 100644 package/rtl8192eu/rtl8192eu.hash > create mode 100644 package/rtl8192eu/rtl8192eu.mk Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From james.hilliard1 at gmail.com Sun Oct 30 20:35:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 16:35:43 -0400 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring In-Reply-To: <20221030212629.51bf650e@windsurf> References: <20221014230905.3091021-1-james.hilliard1@gmail.com> <20221030212629.51bf650e@windsurf> Message-ID: On Sun, Oct 30, 2022 at 4:26 PM Thomas Petazzoni wrote: > > Hello James, > > On Fri, 14 Oct 2022 17:09:05 -0600 > James Hilliard wrote: > > > +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) > > I must be missing something, but why is -$(MAKEFLAGS) used and not just > $(MAKEFLAGS) ? > > Indeed, with "make -s --debug -k", $(MAKEFLAGS) is "ks --debug=all", > and therefore $(firstword $(MAKEFLAGS)) is ks, which is good enough for > the findstring s, no? Why is adding a - in front needed? I think so that if $(MAKEFLAGS) doesn't have any short options that it won't accidentally match on a long option. For example if $(MAKEFLAGS) is " --shuffle=none" the - in front ensures that we don't match the s in a long option like shuffle. > > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:04 +0100 Subject: [Buildroot] [git commit] package/rtl8192eu: new package Message-ID: <20221030203614.A24F487667@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ad62fa3acb4faff72385e841af700f09985ce07e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index f82a23b83e..8dbd0e0ebb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1411,6 +1411,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index d691471877..1f4cfa7cfd 100644 --- a/package/Config.in +++ b/package/Config.in @@ -579,6 +579,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..f616def194 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 75b523ff1cda54d7cd8734a043b2d145231ab81fcc13d3edcd80e00d59201409 rtl8192eu-1e15b6d451731bc4d3ffd587194dc4bd0f286ac0.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..0e8ffea5cb --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 1e15b6d451731bc4d3ffd587194dc4bd0f286ac0 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:54 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: drop dbus check In-Reply-To: References: Message-ID: <20221030213654.354999c4@windsurf> On Mon, 17 Oct 2022 06:21:18 +0000 Lang Daniel via buildroot wrote: > Since 6f5f6bc dbus is selected when iwd is selected. > It is only a runtime dependency, so drop the build > dependency. > > Signed-off-by: Daniel Lang > --- > Changed v1 -> v2: > - dbus is only a runtime dependency, drop > the build dependency (thanks Yann). Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:43 +0100 Subject: [Buildroot] [git commit] package/iwd: drop dbus check Message-ID: <20221030203754.83ED487670@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since 6f5f6bc dbus is selected when iwd is selected. It is only a runtime dependency, so drop the build dependency. Signed-off-by: Daniel Lang Signed-off-by: Thomas Petazzoni --- package/iwd/iwd.mk | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 297e1fabe9..002988cf33 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -15,16 +15,11 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share IWD_DEPENDENCIES = ell -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif - ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) IWD_LICENSE += , GPL-3.0+ (client) From giulio.benetti at benettiengineering.com Sun Oct 30 20:39:56 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Sun, 30 Oct 2022 21:39:56 +0100 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221030210421.6c2777b2@windsurf> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> <20221030210421.6c2777b2@windsurf> Message-ID: On 30/10/22 21:04, Thomas Petazzoni via buildroot wrote: > On Mon, 17 Oct 2022 22:18:04 +0200 > Giulio Benetti wrote: > >> Signed-off-by: Giulio Benetti >> --- >> DEVELOPERS | 1 + >> 1 file changed, 1 insertion(+) > > Applied to master, thanks. > > However, please *always* resend complete patch series. For PATCH 1/2, > you had sent a v2, and then a v3, and for this PATCH 2/2, only a v1 was > there. This is *extremely* confusing for the maintainers. > > So when you need to send a new version of one patch in a patch series, > please *always* resend the complete patch series, and mark the entire > previous patch series as Superseded. Pardon Thomas, I've lost track of the DEVELOPERS patch while focusing on the 1/2 patch. I'll pay more attention. Best regards -- Giulio Benetti Benetti Engineering sas From thomas.petazzoni at bootlin.com Sun Oct 30 20:43:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:43:00 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-2-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> Message-ID: <20221030214300.629c8f7b@windsurf> On Fri, 14 Oct 2022 08:58:56 +0200 Angelo Compagnucci wrote: > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full > + # path for locating firmware file. > + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") Unfortunately, this is really not a good idea, especially if it is meant to be used with your rtl8723ds-bt package. Indeed, the rtl8723ds-bt firmware is according to your package under a PROPRIETARY license, so not compatible with the GPL. Except that CONFIG_EXTRA_FIRMWARE_DIR can only be used for firmware that is GPL-compatible, as they get linked into the kernel image. What you're proposing to do makes it illegal to distribute the resulting kernel image. You can do it on your machine, but you're not allowed to distribute this kernel image, which for something like Buildroot is a bit of a problem, as you can imagine. See https://elixir.bootlin.com/linux/latest/source/Documentation/driver-api/firmware/built-in-fw.rst#L21 The only options for such firmware is: (1) In the root filesystem, which means the driver needs to be a module... but that's anyway OK as it's going to be the case as it's an out of tree kernel driver, and therefore always compiled as a module. (2) In an initramfs loaded separately from the kernel. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:48:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:48:09 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221014065900.3311604-4-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> Message-ID: <20221030214809.1fa5997c@windsurf> On Fri, 14 Oct 2022 08:58:58 +0200 Angelo Compagnucci wrote: > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > > # Starting with 4.16, the generated kconfig paser code is no longer > # shipped with the kernel sources, so we need flex and bison, but > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..4f6e508106 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -578,6 +578,7 @@ endmenu > source "package/rtl8189fs/Config.in" > source "package/rtl8723bu/Config.in" > source "package/rtl8723ds/Config.in" > + source "package/rtl8723ds-bt/Config.in" > source "package/rtl8812au-aircrack-ng/Config.in" > source "package/rtl8821au/Config.in" > source "package/sane-backends/Config.in" > diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in > new file mode 100644 > index 0000000000..ab4ba0bf11 > --- /dev/null > +++ b/package/rtl8723ds-bt/Config.in > @@ -0,0 +1,6 @@ > +config BR2_PACKAGE_RTL8723DS_BT > + bool "rtl8723ds-bt" > + help > + rtl8723ds UART attached Bluetooth driver So here you're saying this package is for a driver. > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > + $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) > +endef > + > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > + cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > + cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin But here you are only installing the firmware file, and you're not building the kernel module that is provided in this Git repository. Is it because the driver is in the upstream kernel, and the only part that it lacks is the firmware? This is not really clear in your commit log nor in the Config.in help text. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:49:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:49:53 +0100 Subject: [Buildroot] [git commit] package/python-minimalmodbus: new package Message-ID: <20221030205021.08C0F8767A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=30df48b207e6c9f63f751d49e9e783fe5e0b6ecd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ package/python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ package/python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 8dbd0e0ebb..1380ae6a98 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index 1f4cfa7cfd..7ae354d6eb 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1116,6 +1116,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..b29e83773b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 from https://pypi.org/project/minimalmodbus +sha256 cf873a2530be3f4b86467c3e4d47b5f69fd345d47451baca4adbf59e2ac36d00 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..b463cf9ffe --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = https://files.pythonhosted.org/packages/78/99/8cd22b4465e697bae2b02fd06aaccd4c5cdfbb18945d728db99f23d71df9 +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache-2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:51:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:51:01 +0100 Subject: [Buildroot] [PATCH v3] package/python-minimalmodbus: new package In-Reply-To: <20221019133511.1717939-1-angelo@amarulasolutions.com> References: <20221019133511.1717939-1-angelo@amarulasolutions.com> Message-ID: <20221030215101.47713626@windsurf> On Wed, 19 Oct 2022 15:35:11 +0200 Angelo Compagnucci wrote: > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > Signed-off-by: Angelo Compagnucci Applied t master with one change, see below. > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 This is not a valid SPDX identifier. The correct identifier is Apache-2.0. Committed with this fixed. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From angelo at amarulasolutions.com Sun Oct 30 20:52:40 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 30 Oct 2022 21:52:40 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221030214300.629c8f7b@windsurf> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> <20221030214300.629c8f7b@windsurf> Message-ID: On Sun, Oct 30, 2022 at 9:43 PM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:56 +0200 > Angelo Compagnucci wrote: > > > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the > firmware full > > + # path for locating firmware file. > > + $(call > KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") > > Unfortunately, this is really not a good idea, especially if it is > meant to be used with your rtl8723ds-bt package. Indeed, the > rtl8723ds-bt firmware is according to your package under a PROPRIETARY > license, so not compatible with the GPL. > Let's suppose the firware I was planning to load permits to be distributed within the kernk, why it isn't a good idea? I don't think technically there is some problems here, else let me understand. > Except that CONFIG_EXTRA_FIRMWARE_DIR can only be used for firmware > that is GPL-compatible, as they get linked into the kernel image. What > you're proposing to do makes it illegal to distribute the resulting > kernel image. You can do it on your machine, but you're not allowed to > distribute this kernel image, which for something like Buildroot is a > bit of a problem, as you can imagine. > > See > > https://elixir.bootlin.com/linux/latest/source/Documentation/driver-api/firmware/built-in-fw.rst#L21 I don't really want to go down the rabbit hole of what is legal or not, there are legal departments for that. If you think the driver in question is not accptable, I'm ok with that, but I think the mechanism should stay for all the people who need to do something like that. > > The only options for such firmware is: > > (1) In the root filesystem, which means the driver needs to be a > module... but that's anyway OK as it's going to be the case as it's an > out of tree kernel driver, and therefore always compiled as a > module. > > (2) In an initramfs loaded separately from the kernel. > Let's discuss this in the driver, I'm more than welcome to change the way I conceived it. > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Sun Oct 30 20:55:10 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 30 Oct 2022 21:55:10 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221030214809.1fa5997c@windsurf> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> <20221030214809.1fa5997c@windsurf> Message-ID: On Sun, Oct 30, 2022 at 9:48 PM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:58 +0200 > Angelo Compagnucci wrote: > > > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > > $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > > $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > > $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > > - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > > + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > > + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > > > > # Starting with 4.16, the generated kconfig paser code is no longer > > # shipped with the kernel sources, so we need flex and bison, but > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..4f6e508106 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -578,6 +578,7 @@ endmenu > > source "package/rtl8189fs/Config.in" > > source "package/rtl8723bu/Config.in" > > source "package/rtl8723ds/Config.in" > > + source "package/rtl8723ds-bt/Config.in" > > source "package/rtl8812au-aircrack-ng/Config.in" > > source "package/rtl8821au/Config.in" > > source "package/sane-backends/Config.in" > > diff --git a/package/rtl8723ds-bt/Config.in > b/package/rtl8723ds-bt/Config.in > > new file mode 100644 > > index 0000000000..ab4ba0bf11 > > --- /dev/null > > +++ b/package/rtl8723ds-bt/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_RTL8723DS_BT > > + bool "rtl8723ds-bt" > > + help > > + rtl8723ds UART attached Bluetooth driver > > So here you're saying this package is for a driver. > > > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > > + $(call > KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin > rtl_bt/rtl8723ds_config.bin) > > +endef > > + > > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > > + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > > + cp $(@D)/8723D/rtl8723d_fw > $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > > + cp $(@D)/8723D/rtl8723d_config > $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin > > But here you are only installing the firmware file, and you're not > building the kernel module that is provided in this Git repository. > > Is it because the driver is in the upstream kernel, and the only part > that it lacks is the firmware? > > This is not really clear in your commit log nor in the Config.in help > text. > Thi package "enables" (as in the commit log) the module, I didn't want to word differently, because what we are really doing here is simply enabling some kernel drivers and offering a way to download the firmware. Anyway, I will reword it better. > > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Sun Oct 30 20:51:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:51:10 +0100 Subject: [Buildroot] [git commit] package/paho-mqtt-c: bump to version 1.3.11 Message-ID: <20221030205640.34C9687686@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f0a5cd606f260d85f1a74a3af5fbf2b11edae3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Service release. Issues resolved: https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 Signed-off-by: Daniel Lang Signed-off-by: Thomas Petazzoni --- package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/paho-mqtt-c/paho-mqtt-c.hash b/package/paho-mqtt-c/paho-mqtt-c.hash index 931bf5b9c8..1949abdf1a 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.hash +++ b/package/paho-mqtt-c/paho-mqtt-c.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c70db96e66adacae411d5d875fbb08bca6ff9945de3d215b3af93cbd22792db5 paho-mqtt-c-1.3.10.tar.gz +sha256 d7bba3f8b8978802e11e2b1f28e96e6b7f4ed5d8a268af52a4d3b1bcbd1db16b paho-mqtt-c-1.3.11.tar.gz sha256 83bbba033dc985487e321b6dfde111772affb73460be48726299fed3da684b1c edl-v10 sha256 0becf16567beb77fa252b7664631dd177c8f9a1889e48995b45379c7130e5303 epl-v20 sha256 bc0f3f447097eb82a29ad6c2f4929572bb548b6bd4c9e38fde1bf131a771b7a0 LICENSE diff --git a/package/paho-mqtt-c/paho-mqtt-c.mk b/package/paho-mqtt-c/paho-mqtt-c.mk index 1b6fc5785c..30daf863ad 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.mk +++ b/package/paho-mqtt-c/paho-mqtt-c.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHO_MQTT_C_VERSION = 1.3.10 +PAHO_MQTT_C_VERSION = 1.3.11 PAHO_MQTT_C_SITE = $(call github,eclipse,paho.mqtt.c,v$(PAHO_MQTT_C_VERSION)) PAHO_MQTT_C_LICENSE = EPL-2.0 or BSD-3-Clause PAHO_MQTT_C_LICENSE_FILES = epl-v20 edl-v10 LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 20:56:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:56:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/paho-mqtt-c: bump to version 1.3.11 In-Reply-To: References: Message-ID: <20221030215645.1a41ec82@windsurf> On Wed, 19 Oct 2022 09:14:20 +0000 Lang Daniel via buildroot wrote: > Service release. Issues resolved: > https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 > > https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 > > Signed-off-by: Daniel Lang > --- > package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- > package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:57:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:57:59 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221029082510.61178-1-fontaine.fabrice@gmail.com> References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> Message-ID: <20221030215759.0d848e58@windsurf> Hello Fabrice, On Sat, 29 Oct 2022 10:25:10 +0200 Fabrice Fontaine wrote: > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > Signed-off-by: Fabrice Fontaine We have zillions of build failures for host-pahole: http://autobuild.buildroot.net/?reason=host-pahole% Is this version bump fixing them? If not, do we have an idea on how to fix this build issue (I didn't investigated myself)? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:17:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:17:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221030215759.0d848e58@windsurf> References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> <20221030215759.0d848e58@windsurf> Message-ID: Hello Thomas, Le dim. 30 oct. 2022 ? 21:58, Thomas Petazzoni a ?crit : > Hello Fabrice, > > On Sat, 29 Oct 2022 10:25:10 +0200 > Fabrice Fontaine wrote: > > > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > > > Signed-off-by: Fabrice Fontaine > > We have zillions of build failures for host-pahole: > > http://autobuild.buildroot.net/?reason=host-pahole% > > Is this version bump fixing them? If not, do we have an idea on how to > fix this build issue (I didn't investigated myself)? > Nope, this version bump will not fix these build failures. I tried to investigate but I wasn't able to reproduce it locally on my machine. These build failures are mostly raised by your autobuilder. My assumption is that your kernel is probably too old, bpf_link_type is only available since version 5.8 and https://github.com/torvalds/linux/commit/f2e10bff16a0fdd41ba278c84da9813700e356af However, I don't know how to add this dependency to host-pahole (and host-libbpf). > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From yann.morin.1998 at free.fr Sun Oct 30 21:21:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 22:21:14 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> <20221030214809.1fa5997c@windsurf> Message-ID: <20221030212114.GH1058960@scaer> Angelo, All, On 2022-10-30 21:55 +0100, Angelo Compagnucci spake thusly: > On Sun, Oct 30, 2022 at 9:48 PM Thomas Petazzoni < [1]thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:58 +0200 > Angelo Compagnucci < [2]angelo at amarulasolutions.com> wrote: > > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > >? ? ? ?$(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > >? ? ? ?$(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > >? ? ? ?$(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > > -? ? ?$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > > +? ? ?$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > > +? ? ?$(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > >? > >? # Starting with 4.16, the generated kconfig paser code is no longer > >? # shipped with the kernel sources, so we need flex and bison, but > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..4f6e508106 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -578,6 +578,7 @@ endmenu > >? ? ? ?source "package/rtl8189fs/Config.in" > >? ? ? ?source "package/rtl8723bu/Config.in" > >? ? ? ?source "package/rtl8723ds/Config.in" > > +? ? ?source "package/rtl8723ds-bt/Config.in" > >? ? ? ?source "package/rtl8812au-aircrack-ng/Config.in" > >? ? ? ?source "package/rtl8821au/Config.in" > >? ? ? ?source "package/sane-backends/Config.in" > > diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in > > new file mode 100644 > > index 0000000000..ab4ba0bf11 > > --- /dev/null > > +++ b/package/rtl8723ds-bt/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_RTL8723DS_BT > > +? ? ?bool "rtl8723ds-bt" > > +? ? ?help > > +? ? ? ?rtl8723ds UART attached Bluetooth driver > > So here you're saying this package is for a driver. > > > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > > +? ? ?$(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) > > +endef > > + > > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > > +? ? ?mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > > +? ? ?cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > > +? ? ?cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin > > But here you are only installing the firmware file, and you're not > building the kernel module that is provided in this Git repository. > > Is it because the driver is in the upstream kernel, and the only part > that it lacks is the firmware? > > This is not really clear in your commit log nor in the Config.in help > text. > > Thi package "enables" (as in the commit log) the module, I didn't want to word differently, because what we are really doing here is > simply enabling some kernel drivers and offering a way to download the firmware. Anyway, I will reword it better. Look at the other firmware packages we have: they only install the firmware blobs they provide. Enabling kernel options to enable a kernel driver is what the user does when they provide the configuration file for the kernel. We do not want to have an option in Buildroot for each driver that can be enabled in the kernel. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 21:19:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:19:34 +0100 Subject: [Buildroot] [git commit] package/openvmtools: add CPE ID information Message-ID: <20221030212300.E1EB087691@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=267188242e4edcfbca272168e62c2e9bc70864ce branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master See: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Avmware%3Atools Signed-off-by: Thomas Petazzoni --- package/openvmtools/openvmtools.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/openvmtools/openvmtools.mk b/package/openvmtools/openvmtools.mk index 59080c05aa..d536e5e819 100644 --- a/package/openvmtools/openvmtools.mk +++ b/package/openvmtools/openvmtools.mk @@ -10,6 +10,8 @@ OPENVMTOOLS_SITE = https://github.com/vmware/open-vm-tools/releases/download/sta OPENVMTOOLS_SOURCE = open-vm-tools-$(OPENVMTOOLS_VERSION).tar.gz OPENVMTOOLS_LICENSE = LGPL-2.1 OPENVMTOOLS_LICENSE_FILES = COPYING +OPENVMTOOLS_CPE_ID_VENDOR = vmware +OPENVMTOOLS_CPE_ID_PRODUCT = tools # configure.ac is patched OPENVMTOOLS_AUTORECONF = YES From thomas.petazzoni at bootlin.com Sun Oct 30 21:21:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:21:46 +0100 Subject: [Buildroot] [git commit] package/openvmtools: fix CVE-2022-31676 Message-ID: <20221030212300.ECBE887692@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b123e8887dc29eb2764162c048e8521a4072531a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner Signed-off-by: Thomas Petazzoni --- ...eck-authorization-on-incoming-guestOps-re.patch | 40 ++++++++++++++++++++++ package/openvmtools/openvmtools.mk | 3 ++ 2 files changed, 43 insertions(+) diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..91e379b9a6 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,40 @@ +From bb9f9ffbb151397545f921cee5b6a4933c6eea80 Mon Sep 17 00:00:00 2001 +Message-Id: +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. + +Upstream: https://github.com/vmware/open-vm-tools/blob/CVE-2022-31676.patch/1205-Properly-check-authorization-on-incoming-guestOps-re.patch +Signed-off-by: Stefan Agner +--- + vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/vgauth/serviceImpl/proto.c b/vgauth/serviceImpl/proto.c +index db7159ee..c4f85b02 100644 +--- a/vgauth/serviceImpl/proto.c ++++ b/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019-2021 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.38.0 + diff --git a/package/openvmtools/openvmtools.mk b/package/openvmtools/openvmtools.mk index d536e5e819..3106b9ecd6 100644 --- a/package/openvmtools/openvmtools.mk +++ b/package/openvmtools/openvmtools.mk @@ -13,6 +13,9 @@ OPENVMTOOLS_LICENSE_FILES = COPYING OPENVMTOOLS_CPE_ID_VENDOR = vmware OPENVMTOOLS_CPE_ID_PRODUCT = tools +# 0013-Properly-check-authorization-on-incoming-guestOps-re.patch +OPENVMTOOLS_IGNORE_CVES += CVE-2022-31676 + # configure.ac is patched OPENVMTOOLS_AUTORECONF = YES OPENVMTOOLS_CONF_OPTS = --with-dnet \ From yann.morin.1998 at free.fr Sun Oct 30 21:23:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 22:23:33 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-2-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> Message-ID: <20221030212333.GI1058960@scaer> Angelo, All, On 2022-10-14 08:58 +0200, Angelo Compagnucci spake thusly: > CONFIG_EXTRA_FIRMWARE_DIR must point to the directory where firmware > file from CONFIG_EXTRA_FIRMWARE will be taken to be embedded to the > kernel. > The option is removed if CONFIG_EXTRA_FIRMWARE is not used, but it > defaults to a sensible value when used. > > Signed-off-by: Angelo Compagnucci > --- > linux/linux.mk | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/linux/linux.mk b/linux/linux.mk > index efdc21eff2..9a909c7d7b 100644 > --- a/linux/linux.mk > +++ b/linux/linux.mk > @@ -408,6 +408,9 @@ define LINUX_KCONFIG_FIXUP_CMDS > $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO) > $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO_LINUX_CLUT224)) > $(call KCONFIG_DISABLE_OPT,CONFIG_GCC_PLUGINS) > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full > + # path for locating firmware file. > + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") Besides what Thomas already said: firmware files are not installed in STAGING_DIR/lib/firmware, but they are in TARGET_DIR/lib/frmware. Also, some people already point CONFIG_EXTRA_FIRMWARE_DIR=$(INAGES_DIR) as there are some firmware fiels copied in there already, so we do not want to force that for them. Regards, Yann E. MORIN. > $(PACKAGES_LINUX_CONFIG_FIXUPS) > endef > > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 21:24:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:24:32 +0100 Subject: [Buildroot] [PATCH v2] package/openvmtools: fix local privilege escalation vulnerability In-Reply-To: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> References: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> Message-ID: <20221030222432.26968da5@windsurf> Hello Stefan, On Wed, 19 Oct 2022 10:56:16 +0200 Stefan Agner wrote: > Add a patch for CVE-2022-31676 (local privilege escalation > vulnerability). > > Signed-off-by: Stefan Agner > --- > v2: Actually make the patch apply I've applied to master, but after: (1) Adding a reference to the upstream location where the patch was provided (2) Adding a OPENVMTOOLS_IGNORE_CVES entry in the .mk file to ignore the CVE now that it is fixed. According to our CVE tracking infrastructure, there are 3 other CVEs affecting openvmtools: CVE-2014-4199, CVE-2014-4200, CVE-2022-22943. Do you think you could have a look? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 21:24:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:24:54 +0100 Subject: [Buildroot] [git commit] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 Message-ID: <20221030212504.CE84687699@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=dce3617ada3ed2a1eabab2d1dc2ed0b83bdbe536 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash index ac6587b27a..fd874f1f0a 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 64f15a8c7d383ac92230ef82711507a7f3a309462999f6694863fbbb4f12e0be sunxi-mali-utgard-driver-c4cf7aabed25e0fd27159564caf588a37016870d.tar.gz +sha256 4b66f20272c63ce8ea769bf1c95f9923ed6facabe0c14a8c7644b302b9f23b58 sunxi-mali-utgard-driver-73a80d550f2f181b5fc7fc2d859e15d077d845e4.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk index 594a770e61..15d660e49d 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk @@ -4,7 +4,7 @@ # ################################################################################ -SUNXI_MALI_UTGARD_DRIVER_VERSION = c4cf7aabed25e0fd27159564caf588a37016870d +SUNXI_MALI_UTGARD_DRIVER_VERSION = 73a80d550f2f181b5fc7fc2d859e15d077d845e4 SUNXI_MALI_UTGARD_DRIVER_SITE = $(call github,giuliobenetti,sunxi-mali,$(SUNXI_MALI_UTGARD_DRIVER_VERSION)) SUNXI_MALI_UTGARD_DRIVER_DEPENDENCIES = linux SUNXI_MALI_UTGARD_DRIVER_LICENSE = GPL-2.0 From thomas.petazzoni at bootlin.com Sun Oct 30 21:25:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:25:07 +0100 Subject: [Buildroot] [PATCH] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 In-Reply-To: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> References: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030222507.413e4c80@windsurf> On Wed, 12 Oct 2022 18:00:25 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- > package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:25:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:25:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/motion: bump to version 4.5.0 Message-ID: <20221030212519.66340-1-fontaine.fabrice@gmail.com> https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 Signed-off-by: Fabrice Fontaine --- package/motion/motion.hash | 2 +- package/motion/motion.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/motion/motion.hash b/package/motion/motion.hash index 085ac90449..9b99256864 100644 --- a/package/motion/motion.hash +++ b/package/motion/motion.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/motion/motion.mk b/package/motion/motion.mk index 5d54ecea01..18fe0eb630 100644 --- a/package/motion/motion.mk +++ b/package/motion/motion.mk @@ -4,7 +4,7 @@ # ################################################################################ -MOTION_VERSION = 4.4.0 +MOTION_VERSION = 4.5.0 MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) MOTION_LICENSE = GPL-2.0 MOTION_LICENSE_FILES = LICENSE -- 2.35.1 From bernd.kuhls at t-online.de Sun Oct 30 21:25:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:25:29 +0100 Subject: [Buildroot] [PATCH 1/1] package/exim: fix typo in comment Message-ID: <20221030212529.364240-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/exim/exim.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/exim/exim.mk b/package/exim/exim.mk index e0fcd83fb0..9c54eeec44 100644 --- a/package/exim/exim.mk +++ b/package/exim/exim.mk @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value $(@D)/Local/Makefile endef -# Comment-out a variable. Has no effect if it does not exits. +# Comment-out a variable. Has no effect if it does not exist. define exim-config-unset # variable-name $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ $(@D)/Local/Makefile -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 21:28:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:28:55 +0100 Subject: [Buildroot] [git commit] package/wolftpm: bump version to v2.6.0 Message-ID: <20221030212911.C74558769E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=09779d0f6918377e77f108f27695b16c48cfd1a8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Dimitar Tomov Signed-off-by: Thomas Petazzoni --- package/wolftpm/wolftpm.hash | 3 +-- package/wolftpm/wolftpm.mk | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash index d24df58eaa..735c731a53 100644 --- a/package/wolftpm/wolftpm.hash +++ b/package/wolftpm/wolftpm.hash @@ -1,4 +1,3 @@ -# Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz # Locally calculated +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolftpm-2.6.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index 7e8a108585..f217322545 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFTPM_VERSION = 2.4.0 +WOLFTPM_VERSION = 2.6.0 WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) WOLFTPM_INSTALL_STAGING = YES WOLFTPM_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Sun Oct 30 21:29:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:29:57 +0100 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: <20221030222957.2d4a2e0a@windsurf> On Wed, 12 Oct 2022 10:54:22 +0300 Dimi Tomov wrote: > From: Dimitar Tomov > > This patch series bumps the wolftpm version to the latest available and > adds one new config option for controlling debug messages in wolftpm. The commit log of a patch should not describe the patch series, but just the patch itself. The commit title should be: package/wolftpm: bump to version v2.6.0 > package/wolftpm/wolftpm.hash | 2 +- > package/wolftpm/wolftpm.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash > index d24df58eaa..e256967a01 100644 > --- a/package/wolftpm/wolftpm.hash > +++ b/package/wolftpm/wolftpm.hash > @@ -1,4 +1,4 @@ > # Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz This link is no longer correct. And in fact it is useless. Having a link here is useful when it's a link to a hash file provided by upstream, which is not the case here. In this case, we just put "Locally calculated". > -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz > +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolfTPM-2.6.0.tar.gz You clearly did not test this properly, as the file is not named wolfTPM-2.6.0.tar.gz but wolftpm-2.6.0.tar.gz. So a simple build fails with: ERROR: No hash found for wolftpm-2.6.0.tar.gz I've fixed those issues and applied. But the next time, instead of pinging just one day after submitting your patch... could you rather spend your time in actually testing your patch? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 21:31:37 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:31:37 +0100 Subject: [Buildroot] [git commit] package/wolftpm: add config option to enable debug output Message-ID: <20221030213223.8C9DA876B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fada6de8b0798f896626723c3cc6a7aea4521d48 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Dimitar Tomov Signed-off-by: Thomas Petazzoni --- package/wolftpm/Config.in | 5 +++++ package/wolftpm/wolftpm.mk | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 7ebb253857..4e712d0afb 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -35,6 +35,11 @@ config BR2_PACKAGE_WOLFTPM_NUVOTON Enable support of TPM 2.0 extra functionality offered by the Nuvoton NPCT750 chip. +config BR2_PACKAGE_WOLFTPM_DEBUG + bool "Debug output" + help + Enable debug messages in wolfTPM. + comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index f217322545..398fa668af 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -47,4 +47,10 @@ else WOLFTPM_CONF_OPTS += --disable-nuvoton endif +ifeq ($(BR2_PACKAGE_WOLFTPM_DEBUG),y) +WOLFTPM_CONF_OPTS += --enable-debug +else +WOLFTPM_CONF_OPTS += --disable-debug +endif + $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 21:31:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:31:59 +0100 Subject: [Buildroot] [git commit] package/wolftpm: move Config.in comment near the option it is related to Message-ID: <20221030213223.97D43876B3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6ad33ff4d77eee483f54add9ed9e2100d558120f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Thomas Petazzoni --- package/wolftpm/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 4e712d0afb..4ed1853bde 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -23,6 +23,9 @@ config BR2_PACKAGE_WOLFTPM_WOLFCRYPT encryption. Disabling this option is not recommended as it could create a security breach in most environments. +comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS + config BR2_PACKAGE_WOLFTPM_ST33 bool "ST33 extra functionality" help @@ -40,7 +43,4 @@ config BR2_PACKAGE_WOLFTPM_DEBUG help Enable debug messages in wolfTPM. -comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS - endif From thomas.petazzoni at bootlin.com Sun Oct 30 21:32:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:32:51 +0100 Subject: [Buildroot] [PATCH 2/2] package/wolftpm: Add new config option to enable debug output In-Reply-To: <20221012075423.14729-2-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> <20221012075423.14729-2-dimi@tpm.dev> Message-ID: <20221030223251.7eb4a4cb@windsurf> On Wed, 12 Oct 2022 10:54:23 +0300 Dimi Tomov wrote: > From: Dimitar Tomov > > Signed-off-by: Dimitar Tomov > --- > package/wolftpm/Config.in | 5 +++++ > package/wolftpm/wolftpm.mk | 6 ++++++ > 2 files changed, 11 insertions(+) I hesitated a bit between adding this new option, or using BR2_ENABLE_RUNTIME_DEBUG. In the end, I went for your proposal, a package-specific option. We'll see if other maintainers complain :-) Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:35:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:35:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/arp-scan: bump to version 1.9.8 Message-ID: <20221030213517.95390-1-fontaine.fabrice@gmail.com> Update hash of COPYING (gnu.org license file used since https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog Signed-off-by: Fabrice Fontaine --- package/arp-scan/arp-scan.hash | 4 ++-- package/arp-scan/arp-scan.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash index dd97333013..b18c6ceb38 100644 --- a/package/arp-scan/arp-scan.hash +++ b/package/arp-scan/arp-scan.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk index 3fdbd463c2..73d1b99bc7 100644 --- a/package/arp-scan/arp-scan.mk +++ b/package/arp-scan/arp-scan.mk @@ -4,7 +4,7 @@ # ################################################################################ -ARP_SCAN_VERSION = 1.9.7 +ARP_SCAN_VERSION = 1.9.8 ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) ARP_SCAN_LICENSE = GPL-3.0+ ARP_SCAN_LICENSE_FILES = COPYING -- 2.35.1 From flaniel at linux.microsoft.com Sun Oct 30 21:29:32 2022 From: flaniel at linux.microsoft.com (Francis Laniel) Date: Sun, 30 Oct 2022 22:29:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> <20221030215759.0d848e58@windsurf> Message-ID: <5616514.DvuYhMxLoT@pwmachine> Hi. Le dimanche 30 octobre 2022, 22:17:55 CET Fabrice Fontaine a ?crit : > Hello Thomas, > > Le dim. 30 oct. 2022 ? 21:58, Thomas Petazzoni > > a ?crit : > > Hello Fabrice, > > > > On Sat, 29 Oct 2022 10:25:10 +0200 > > > > Fabrice Fontaine wrote: > > > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > > > > > Signed-off-by: Fabrice Fontaine > > > > We have zillions of build failures for host-pahole: > > http://autobuild.buildroot.net/?reason=host-pahole% Sorry for the disturbance. > > Is this version bump fixing them? If not, do we have an idea on how to > > fix this build issue (I didn't investigated myself)? > > Nope, this version bump will not fix these build failures. I tried to > investigate but I wasn't able to reproduce it locally on my machine. > These build failures are mostly raised by your autobuilder. > > My assumption is that your kernel is probably too old, bpf_link_type is > only available since version 5.8 and > https://github.com/torvalds/linux/commit/f2e10bff16a0fdd41ba278c84da9813700e > 356af > > However, I don't know how to add this dependency to host-pahole (and > host-libbpf). I proposed this patch set: https://lore.kernel.org/buildroot/20220610165441.84812-1-flaniel at linux.microsoft.com/ to fix the build failures. As pointed above, I am also not able to reproduce locally and I do not have access to an autobuilder setup (or I do not know how I can mimic one) to investigate on it. Do you think the above patch can do the trick? If not, is it possible to deploy locally an autobuilder to check if I can reproduce the problem and propose a correct patch? > > Thanks! > > > > Thomas > > -- > > Thomas Petazzoni, co-owner and CEO, Bootlin > > Embedded Linux and Kernel engineering and training > > https://bootlin.com > > Best Regards, > > Fabrice Best regards and thank you in advance. From bernd.kuhls at t-online.de Sun Oct 30 21:37:43 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:37:43 +0100 Subject: [Buildroot] [PATCH 1/1] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 Message-ID: <20221030213743.943645-1-bernd.kuhls@t-online.de> - libuv Release notes: https://github.com/libuv/libuv/issues/3452 https://github.com/libuv/libuv/issues/3522 https://github.com/libuv/libuv/issues/3586 Updated license hash due to various commits regarding Android/Windows. - uvw: Updated license hash due to copyright year bump: https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 Signed-off-by: Bernd Kuhls --- package/libuv/libuv.hash | 4 ++-- package/libuv/libuv.mk | 2 +- package/uvw/uvw.hash | 4 ++-- package/uvw/uvw.mk | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash index 1874aa344c..b0fa0ff5be 100644 --- a/package/libuv/libuv.hash +++ b/package/libuv/libuv.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk index ed51fc92f9..c169b76a6a 100644 --- a/package/libuv/libuv.mk +++ b/package/libuv/libuv.mk @@ -6,7 +6,7 @@ # When bumping libuv, check if a new version of uvw is available # and bump it too. -LIBUV_VERSION = 1.43.0 +LIBUV_VERSION = 1.44.2 LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) LIBUV_DEPENDENCIES = host-pkgconf LIBUV_INSTALL_STAGING = YES diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash index 564c0980f3..a0c74bbe05 100644 --- a/package/uvw/uvw.hash +++ b/package/uvw/uvw.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk index 161c40849d..b6c2135d6f 100644 --- a/package/uvw/uvw.mk +++ b/package/uvw/uvw.mk @@ -4,7 +4,7 @@ # ################################################################################ -UVW_VERSION = 2.11.0_libuv_v1.43 +UVW_VERSION = 2.12.1_libuv_v1.44 UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) UVW_INSTALL_STAGING = YES UVW_INSTALL_TARGET = NO -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 21:48:49 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:48:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/pixman: fix powerpc64le build References: <20220708142150.234611-1-bernd.kuhls__17925.5718061299$1657290142$gmane$org@t-online.de> Message-ID: Am Fri, 8 Jul 2022 16:21:50 +0200 schrieb Bernd Kuhls: > Disable vmx support to fix build error: > > pixman-vmx.c:268:5: note: in expansion of macro 'LOAD_VECTOR' > 268 | LOAD_VECTOR (src); > | ^~~~~~~~~~~ > pixman-vmx.c:268:5: error: cannot convert a value of type 'int' to > vector type '__vector(4) unsigned int' which has different size > > Fixes: > http://autobuild.buildroot.net/results/ fda886768fce25ccd9b52b635ff5b13da7ba2d0c/ Marked as "Handled Elsewhere" in patchworks due to https://git.buildroot.net/buildroot/commit/? id=fdb23693a4bff5e9e9472738a0278ae0b13411e0 Regards, Bernd From fontaine.fabrice at gmail.com Sun Oct 30 21:50:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:50:45 +0100 Subject: [Buildroot] [PATCH 1/2] package/exfatprogs: drop host-pkgconf dependency Message-ID: <20221030215046.461380-1-fontaine.fabrice@gmail.com> host-pkgconf is not a dependency since bump to version 1.0.3 in commit fbad745139125ea0995a436fd81ce7ea233638c0 and https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced Signed-off-by: Fabrice Fontaine --- package/exfatprogs/exfatprogs.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 2911d21f4f..44679c7d60 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ EXFATPROGS_LICENSE_FILES = COPYING -EXFATPROGS_DEPENDENCIES = host-pkgconf -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf $(eval $(autotools-package)) $(eval $(host-autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 21:50:46 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:50:46 +0100 Subject: [Buildroot] [PATCH 2/2] package/exfatprogs: bump to version 1.2.0 In-Reply-To: <20221030215046.461380-1-fontaine.fabrice@gmail.com> References: <20221030215046.461380-1-fontaine.fabrice@gmail.com> Message-ID: <20221030215046.461380-2-fontaine.fabrice@gmail.com> https://github.com/exfatprogs/exfatprogs/releases/tag/1.2.0 Signed-off-by: Fabrice Fontaine --- package/exfatprogs/exfatprogs.hash | 4 ++-- package/exfatprogs/exfatprogs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/exfatprogs/exfatprogs.hash b/package/exfatprogs/exfatprogs.hash index 99f57c9deb..49135b1da7 100644 --- a/package/exfatprogs/exfatprogs.hash +++ b/package/exfatprogs/exfatprogs.hash @@ -1,5 +1,5 @@ -# From https://github.com/exfatprogs/exfatprogs/releases/download/1.1.3/exfatprogs-1.1.3.tar.xz.sha256 -sha256 3dbd74b60eec18d2c68d57be4a872d7baa4f7d848e669e31159452ef5245b809 exfatprogs-1.1.3.tar.xz +# From https://github.com/exfatprogs/exfatprogs/releases/download/1.2.0/exfatprogs-1.2.0.tar.xz.sha256 +sha256 56d9a49465deafc367d428afc71c8098705a30ee19a3cdf3c5320650b8880742 exfatprogs-1.2.0.tar.xz # Hash for license file sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 44679c7d60..d755c7a214 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXFATPROGS_VERSION = 1.1.3 +EXFATPROGS_VERSION = 1.2.0 EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 21:52:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:52:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/cups-pk-helper: bump to version 0.2.7 Message-ID: <20221030215201.463000-1-fontaine.fabrice@gmail.com> Switch to meson-package https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS Signed-off-by: Fabrice Fontaine --- package/cups-pk-helper/cups-pk-helper.hash | 3 ++- package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash index 18fe789389..75c5a5ffda 100644 --- a/package/cups-pk-helper/cups-pk-helper.hash +++ b/package/cups-pk-helper/cups-pk-helper.hash @@ -1,3 +1,4 @@ +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz # Locally computed: -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk index c688743160..2bd00c6912 100644 --- a/package/cups-pk-helper/cups-pk-helper.mk +++ b/package/cups-pk-helper/cups-pk-helper.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_PK_HELPER_VERSION = 0.2.6 +CUPS_PK_HELPER_VERSION = 0.2.7 CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz CUPS_PK_HELPER_LICENSE = GPL-2.0+ @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit -$(eval $(autotools-package)) +$(eval $(meson-package)) -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 30 21:54:58 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 15:54:58 -0600 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build Message-ID: <20221030215458.3773991-1-james.hilliard1@gmail.com> Backport an upstream patch to fix a crash during kernel build. Details: https://bugs.gentoo.org/868567 Fixes: GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c free(): double free detected in tcache 2 Aborted Signed-off-by: James Hilliard --- .../0002-Fix-a-bug-with-Node_elem_new.patch | 155 ++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch new file mode 100644 index 0000000000..502f7dcd95 --- /dev/null +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -0,0 +1,155 @@ +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 +From: "Arnold D. Robbins" +Date: Wed, 14 Sep 2022 21:08:59 +0300 +Subject: [PATCH] Fix a bug with Node_elem_new. + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +baab183439ff4e0c6b77d62156d447e61fc1dcfb] +--- + ChangeLog | 8 ++++++++ + interpret.h | 1 + + test/ChangeLog | 5 +++++ + test/Makefile.am | 4 +++- + test/Makefile.in | 9 ++++++++- + test/Maketests | 5 +++++ + test/elemnew1.awk | 9 +++++++++ + test/elemnew1.ok | 0 + 8 files changed, 39 insertions(+), 2 deletions(-) + create mode 100644 test/elemnew1.awk + create mode 100644 test/elemnew1.ok + +diff --git a/ChangeLog b/ChangeLog +index 5fb25483..cd9d9fcd 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,11 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * interpret.h (r_interpret): For the `push' opcodes, upref ++ the Node_elem_new. See test case elemnew1. Thanks to ++ Emanuel Attila Czirai for the report, ++ and to Jan Alexander Steffens (heftig)" ++ for the fix. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/interpret.h b/interpret.h +index 57d060e6..268655b2 100644 +--- a/interpret.h ++++ b/interpret.h +@@ -238,6 +238,7 @@ uninitialized_scalar: + _("reference to uninitialized argument `%s'") : + _("reference to uninitialized variable `%s'"), + save_symbol->vname); ++ UPREF(m); + PUSH(m); + break; + +diff --git a/test/ChangeLog b/test/ChangeLog +index a73637bf..ea08edee 100644 +--- a/test/ChangeLog ++++ b/test/ChangeLog +@@ -1,3 +1,8 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. ++ * elemnew1.awk, elemnew1.ok: New files. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/test/Makefile.am b/test/Makefile.am +index ab06974c..8a5c3c49 100644 +--- a/test/Makefile.am ++++ b/test/Makefile.am +@@ -282,6 +282,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +diff --git a/test/Makefile.in b/test/Makefile.in +index 834feb09..a4fb1cc1 100644 +--- a/test/Makefile.in ++++ b/test/Makefile.in +@@ -550,6 +550,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +@@ -4476,6 +4478,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/Maketests b/test/Maketests +index 3a667af8..90828e7f 100644 +--- a/test/Maketests ++++ b/test/Maketests +@@ -1432,6 +1432,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/elemnew1.awk b/test/elemnew1.awk +new file mode 100644 +index 00000000..58dc9fcd +--- /dev/null ++++ b/test/elemnew1.awk +@@ -0,0 +1,9 @@ ++function add_flags(old) { ++ if (old) ++ return 0 ++ if (!old) ++ return 1 ++} ++BEGIN { ++ a[0]=add_flags(a[0]) ++} +diff --git a/test/elemnew1.ok b/test/elemnew1.ok +new file mode 100644 +index 00000000..e69de29b +-- +2.34.1 + -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 22:00:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:00:34 +0100 Subject: [Buildroot] [git commit] package/mdevd: bump to v0.1.6.0 Message-ID: <20221030220110.0FB6F876C0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c8206cdb1cb8efe5046dfd59ad1f468000b0eecb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.1. - execline optional dependency bumped to 2.9.0.1. - New -O nlgroups option to mdevd, rebroadcasting uevents to the netlink after handling them. - The * and & action directives are now triggered by all action types. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mdevd/mdevd.hash b/package/mdevd/mdevd.hash index 93950304be..dea2f14978 100644 --- a/package/mdevd/mdevd.hash +++ b/package/mdevd/mdevd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 ffd3b223b4cf0e51253b4a8f09cb88d70bf22693228ab0818af174a3f099dcd2 mdevd-0.1.4.0.tar.gz -sha256 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995 COPYING +sha256 33cf2b118634538fd24f302b30f52cc8aa28ea68b414916ce482b54a4ee57283 mdevd-0.1.6.0.tar.gz +sha256 7fe938b5e0fec18848955ca8081c532e24ae77310beb730b301e1f77bad3d390 COPYING diff --git a/package/mdevd/mdevd.mk b/package/mdevd/mdevd.mk index a0cd71e76e..9997cb5275 100644 --- a/package/mdevd/mdevd.mk +++ b/package/mdevd/mdevd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MDEVD_VERSION = 0.1.4.0 +MDEVD_VERSION = 0.1.6.0 MDEVD_SITE = http://skarnet.org/software/mdevd MDEVD_LICENSE = ISC MDEVD_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 21:34:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:34:59 +0100 Subject: [Buildroot] [git commit] package/skalibs: bump to v2.12.0.1 Message-ID: <20221030220110.0576F876BF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f7bfc80814e90918b9527cab4cbf6afedd22195 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: New: - New djbunix functions: waitn_posix(), waitn_reap_posix() - New unix-transactional.h function: opendir_at. - New skalibs/posixplz.h function: munmap_void(). - random functions now have an early version, to use when randomness is required before the generator can be seeded (i.e. in programs running in the very early boot). - envdir_internal() now has a SKALIBS_ENVDIR_NOCLAMP option allowing reading of unlimited-size variables. - fd_close() now chooses to adapt to Linux's close() behaviour (closing the fd on EINTR) over the HP-UX one (not closing it). Destructors like close() being allowed to fail has always been a mistake in the specification and a programming nightmare, making it impossible to behave correctly on all systems, but apparently standardization efforts are on the way and the Linux behaviour seems to be the chosen one. Removed: - libbiguint removed. - Obsolete skalibs/environ.h and skalibs/getpeereid.h headers removed. - rc4 and md5 functions removed. - iobuffer removed. fd_cat() and fd_catn() changed signatures. - All signal functions entirely reworked; cruft removed. - The unsafe cdb_successor() API has been removed. - random_init() and random_finish() removed, as well as random_char(). Renamed APIs and type: - random_string() renamed to random_buf(). - All *_t types renamed without the _t suffix, to preserve POSIX namespace. - subgetopt() renamed to lgetopt(). - skalibs/cdb_make.h renamed to skalibs/cdbmake.h; cdbmake functions now return 1 on success and 0 on failure. - skalibs/cdb.h redesigned to remove reader state from the cdb structure. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/skalibs/skalibs.hash b/package/skalibs/skalibs.hash index 48e4028edc..dd202b97fb 100644 --- a/package/skalibs/skalibs.hash +++ b/package/skalibs/skalibs.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 b780b0ae650dda0c3ec5f8975174998af2d24c2a2e2be669b1bab46e73b1464d skalibs-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 3e228f72f18d88c17f6c4e0a66881d6d3779427b7e7e889f3142b6f26da30285 skalibs-2.12.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/skalibs/skalibs.mk b/package/skalibs/skalibs.mk index 77db57de96..0ff449a5ba 100644 --- a/package/skalibs/skalibs.mk +++ b/package/skalibs/skalibs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SKALIBS_VERSION = 2.10.0.3 +SKALIBS_VERSION = 2.12.0.1 SKALIBS_SITE = http://skarnet.org/software/skalibs SKALIBS_LICENSE = ISC SKALIBS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 30 22:11:21 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:11:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/igmpproxy: bump to version 0.4 Message-ID: <20221030221121.474743-1-fontaine.fabrice@gmail.com> https://github.com/pali/igmpproxy/releases/tag/0.4 Signed-off-by: Fabrice Fontaine --- package/igmpproxy/igmpproxy.hash | 2 +- package/igmpproxy/igmpproxy.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash index 238de67e88..a7e1a065d9 100644 --- a/package/igmpproxy/igmpproxy.hash +++ b/package/igmpproxy/igmpproxy.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk index 6a6b56afa0..357c9087e0 100644 --- a/package/igmpproxy/igmpproxy.mk +++ b/package/igmpproxy/igmpproxy.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGMPPROXY_VERSION = 0.3 +IGMPPROXY_VERSION = 0.4 IGMPPROXY_SITE = \ https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) IGMPPROXY_AUTORECONF = YES -- 2.35.1 From ricardo.martincoski at gmail.com Sun Oct 30 22:17:47 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:17:47 -0300 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <635ef80b8245f_3fcfb2ad92177830821937@xultri.mail> Hello, I am not against to switch to pytest. But I didn't understand clearly yet the use case that motivated this series, in which nose2 is not good and pytest is better. Could you elaborate? Also, there are issues to be addressed before merging this series: - the detection of a failed test on GitLab CI is broken, even tests failing return exit code 0, so GitLab infra mark them as PASS, see [1]; - run-tests -s is broken (does not show the build and runtime console); - support to ask a single runtime test to run on GitLab CI is broken due to a regexp that needs to be adapted; - the manual needs to be updated. There are also some changes in behavior that would be nice to be highlighted: - someone willing to find a test in the output of run-tests -l can do: nose2: run-tests -l 2>&1 | grep pattern pytest: run-tests -l | grep pattern - total number of tests: nose2: run-tests -l prints the number of tests at the end "Ran 481 tests" pytest: run-tests -l does not - the name of tests change (list) nose2: test_run (tests.toolchain.test_external_bootlin.\ TestExternalToolchainBootlinPowerpc64lepower8GlibcBleedingEdge) ... ok pytest: support/testing/tests/toolchain/test_external_bootlin.py::\ TestExternalToolchainBootlinPowerpc64lepower8GlibcBleedingEdge::test_run - the name of tests change (local run) nose2: support/testing/run-tests tests.init.test_busybox \ tests.package.test_php_lua.TestPhpLuaLuajit pytest: support/testing/run-tests support/testing/tests/init/test_busybox.py \ support/testing/tests/package/test_php_lua.py::TestPhpLuaLua - the name of tests change (gitlab test suite) nose2: git push gitlab HEAD:foo-tests.init.test_busybox see [2] pytest: git push gitlab HEAD:foo-support/testing/tests/init/test_busybox.py see [3] - the name of tests change (gitlab test case) nose2: git push gitlab HEAD:foo-tests.package.test_php_lua.TestPhpLuaLuajit see [4] pytest: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py--TestPhpLuaLuajit see [5] NOTICE: the use of '--' is just the first solution that came to mind. - the name of tests are longer, so in the GitLab CI the display is a bit worse: nose2: tests.init.test_busybox.TestInitSystemBusyboxRo tests.init.test_busybox.TestInitSystemBusybox... tests.init.test_busybox.TestInitSystemBusybox... tests.init.test_busybox.TestInitSystemBusybox... tests.package.test_php_lua.TestPhpLuaLua tests.package.test_php_lua.TestPhpLuaLuajit pytest: support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/package/test_php_lua.p... support/testing/tests/package/test_php_lua.p... - bash completion for the name of a test suite nose2: no completion support/testing/run-tests tests.init.test_busybox pytest: since it uses the path as the begin of test name one can type 'support/testing/run-tests support/testing' and use bash completion for test files names: support/testing/run-tests support/testing/tests/init/test_busybox.py - cache of results nose2: no cache pytest: it creates a .pytest_cache/ with a cache of the results, so we could later expose another parameter in run-tests that passes '-lf' to pytest, which will re-run only the tests that failed on last run - verbosity when collecting tests: nose2: no output pytest: prints a summary 'collected 1 item' 'pytest-parallel: 1 worker (process), 1 test per worker (thread)' - verbosity while tests are running: nose2: show states for each test (Starting, Building) pytest: shows nothing before each test ends - verbosity when tests fail: nose2: verbose pytest: more verbose than nose2 - verbosity when tests pass: nose2: show states for each test (Starting, Building) pytest: show only a '.' for each test [1] https://gitlab.com/RicardoMartincoski/buildroot/-/jobs/3248620433 [2] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680878149 [3] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680879324 [4] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680879308 [5] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680878335 Regards, Ricardo From ricardo.martincoski at gmail.com Sun Oct 30 22:20:04 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:20:04 -0300 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests References: <20221021091531.2989489-2-oguz.ozhan@mind.be> Message-ID: <635ef894b4558_3fcfb2ad9212def90221e8@xultri.mail> Hello, On Fri, Oct 21, 2022 at 06:15 AM, Oguz Ozhan wrote: > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 > > - Changes in this patch: > - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests > - nose2 plugins removed which are not required anymore > - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest Please split the changes to the tests in a new patch (first in the series). While doing that, please fix flake8 warnings. > > Signed-off-by: Oguz Ozhan > --- > support/testing/conf/unittest.cfg | 3 -- > support/testing/run-tests | 28 ++++++++++------- Please fix flake8 warnings for run-tests as well. > support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ > 3 files changed, 36 insertions(+), 35 deletions(-) Please update the manual, section 'Using the runtime tests framework', in the same commit that changes run-tests to use pytest. [snip] > @@ -106,15 +110,15 @@ def main(): > return 1 > BRConfigTest.timeout_multiplier = args.timeout_multiplier > > - nose2_args = ["-v", > - "-N", str(args.testcases), > - "-s", test_dir, > + pytest_args = ["--workers", str(args.testcases), > + "--rootdir", test_dir, > "-c", os.path.join(test_dir, "conf/unittest.cfg")] run-tests -s is broken: it does not show the build and runtime console > > if args.testname: > - nose2_args += args.testname > + pytest_args += args.testname > + > + pytest.main(pytest_args) > > - nose2.discover(argv=nose2_args) The detection of a failed test on GitLab CI is broken, even when tests fail run-tests returns exit code 0. Regards, Ricardo From ricardo.martincoski at gmail.com Sun Oct 30 22:20:51 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:20:51 -0300 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI References: <20221021091531.2989489-3-oguz.ozhan@mind.be> Message-ID: <635ef8c3d5fea_3fcfb2ad9217830c8223a2@xultri.mail> Hello, IMO, this change should be merged into patch 2. On Fri, Oct 21, 2022 at 06:15 AM, Oguz Ozhan wrote: > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 > > - Changes in this patch: > - the sed command was fine filtering the tests list with nose2 output but removing all operating on pytest output. With pytest no fine filtering is required to get the test names in correct format. > > Signed-off-by: Oguz Ozhan > --- > support/scripts/generate-gitlab-ci-yml | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml > index aa43aac019..bb4dcbbb22 100755 > --- a/support/scripts/generate-gitlab-ci-yml > +++ b/support/scripts/generate-gitlab-ci-yml > @@ -31,7 +31,6 @@ gen_tests() { > defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) > > runtimes=( $(./support/testing/run-tests -l 2>&1 \ > - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ > | LC_ALL=C sort) > ) > > @@ -80,7 +79,6 @@ gen_tests() { > ;; > (*-tests.*) This regexp must be adapted, something like this: (*-support*) pattern="${CI_COMMIT_REF_NAME/--/::}" runtimes=( $(./support/testing/run-tests -l 2>&1 \ | LC_ALL=C sort \ | grep "^${pattern##*-}") Notice that ':' is not accepted on git branches, so we cannot use this branch name to run a single test on GitLab CI: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py::TestPhpLuaLuajit so I guess we could use a pattern substitution, for instance: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py--TestPhpLuaLuajit and document it in the manual. The manual must also be updated. docs/manual/contribute.txt: $ git push gitlab HEAD:foo-tests.init.test_busybox docs/manual/contribute.txt: $ git push gitlab HEAD:foo-tests.init Regards, Ricardo From thomas.petazzoni at bootlin.com Sun Oct 30 22:24:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:24:05 +0100 Subject: [Buildroot] [git commit] package/execline: bump to v2.9.0.1 Message-ID: <20221030222427.8B7C6876C7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8dd62133a771ecdd73a4ffab5ff7bba60ccb4bc3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - New options to wait: -o to wait for one of the listed processes, and -a to get the default behaviour. - wait now exits 99 on timeout. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/execline/execline.hash b/package/execline/execline.hash index 706b131afd..1d72e2cb49 100644 --- a/package/execline/execline.hash +++ b/package/execline/execline.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a373f497d2335905d750e2f3be2ba47a028c11c4a7d5595dca9965c161e53aed execline-2.8.0.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 01260fcaf80ffbca2a94aa55ea474dfb9e39b3033b55c8af88126791879531f6 execline-2.9.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/execline/execline.mk b/package/execline/execline.mk index c348d924b7..38f4570ba4 100644 --- a/package/execline/execline.mk +++ b/package/execline/execline.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXECLINE_VERSION = 2.8.0.1 +EXECLINE_VERSION = 2.9.0.1 EXECLINE_SITE = http://skarnet.org/software/execline EXECLINE_LICENSE = ISC EXECLINE_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:25:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:25:11 +0100 Subject: [Buildroot] [git commit] package/s6: bump to v2.11.1.2 Message-ID: <20221030222630.A6892876CD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=80b1d93d8b783e59ae65a0940e74955dbef3f462 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - execline optional dependency bumped to 2.9.0.1. - skalibs dependency bumped to 2.12.0.0. - nsss optional dependency bumped to 0.2.0.1. - s6-svwait now supports the -r and -R options, to wait for service restarts. - The s6/lock.h, s6/supervise.h and s6/fdholder.h headers replace their previous versions that had an extra s6 prefix. - New binaries: s6-svlink, s6-svunlink, and s6-socklog. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6/s6.hash b/package/s6/s6.hash index a829700d97..3c5ce4265a 100644 --- a/package/s6/s6.hash +++ b/package/s6/s6.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d21373151704150df0e8ed199f097f6ee5d2befb9a68aca4f20f3862e5d8757 s6-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c1474be3e889dac392cee307abe015cd4be0c85c725c84ea7f184f0e34503a2 s6-2.11.1.2.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6/s6.mk b/package/s6/s6.mk index ead82d7eaf..78962ed159 100644 --- a/package/s6/s6.mk +++ b/package/s6/s6.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_VERSION = 2.10.0.3 +S6_VERSION = 2.11.1.2 S6_SITE = http://skarnet.org/software/s6 S6_LICENSE = ISC S6_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:28:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:28:41 +0100 Subject: [Buildroot] [git commit] package/s6-portable-utils: bump to v2.2.5.0 Message-ID: <20221030222858.295DA876DB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd506eb2c8e910f845f311a245eed7a85b7229da branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-portable-utils/s6-portable-utils.hash b/package/s6-portable-utils/s6-portable-utils.hash index dd9f7df4bd..aa38c8b5da 100644 --- a/package/s6-portable-utils/s6-portable-utils.hash +++ b/package/s6-portable-utils/s6-portable-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 6627a2d3ea263539e83512a36f10a587fa0dd5e899bc3612187e9e3b9faf769c s6-portable-utils-2.2.3.2.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 ebb39f8934fd36f25d31352e61bbd94dc02b1e9f04411850d2fd9658bd916e36 s6-portable-utils-2.2.5.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-portable-utils/s6-portable-utils.mk b/package/s6-portable-utils/s6-portable-utils.mk index fb910320ea..8cdb4fa965 100644 --- a/package/s6-portable-utils/s6-portable-utils.mk +++ b/package/s6-portable-utils/s6-portable-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_PORTABLE_UTILS_VERSION = 2.2.3.2 +S6_PORTABLE_UTILS_VERSION = 2.2.5.0 S6_PORTABLE_UTILS_SITE = http://skarnet.org/software/s6-portable-utils S6_PORTABLE_UTILS_LICENSE = ISC S6_PORTABLE_UTILS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:27:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:27:17 +0100 Subject: [Buildroot] [git commit] package/s6-linux-utils: bump to v2.6.0.0 Message-ID: <20221030222858.1FC66876DA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5aac1d0105a73133fd886acc6c5195ca28f7e17f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - s6-fillurandompool has been replaced with the new rngseed program. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-linux-utils/s6-linux-utils.hash b/package/s6-linux-utils/s6-linux-utils.hash index 27e7eb7b7a..c932a4363a 100644 --- a/package/s6-linux-utils/s6-linux-utils.hash +++ b/package/s6-linux-utils/s6-linux-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 c300dbf36b533083f82c6827830c55ce34bfc6cd493c782f207d199669a345ba s6-linux-utils-2.5.1.5.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c7132734a0c8287002ee6910c469f175a97d766a8023c0c33af8ba92643ed59 s6-linux-utils-2.6.0.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-linux-utils/s6-linux-utils.mk b/package/s6-linux-utils/s6-linux-utils.mk index 995ff1b855..ffa3ffac5b 100644 --- a/package/s6-linux-utils/s6-linux-utils.mk +++ b/package/s6-linux-utils/s6-linux-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_LINUX_UTILS_VERSION = 2.5.1.5 +S6_LINUX_UTILS_VERSION = 2.6.0.0 S6_LINUX_UTILS_SITE = http://skarnet.org/software/s6-linux-utils S6_LINUX_UTILS_LICENSE = ISC S6_LINUX_UTILS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:29:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:29:34 +0100 Subject: [Buildroot] [git commit] package/s6-dns: bump to v2.3.5.4 Message-ID: <20221030223042.62BBA876EB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0773fad16c39b383312deec2f35f7fd626ac9cb4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-dns/s6-dns.hash b/package/s6-dns/s6-dns.hash index c63e96e129..5083024520 100644 --- a/package/s6-dns/s6-dns.hash +++ b/package/s6-dns/s6-dns.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 0c1d50e5d7bc65cbf59b6f37fbd7f6f5645694224bb8c4dc1943d7921bc74f63 s6-dns-2.3.5.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 76af222472c4754f83cdc59ad354255ce1b1e6f6833a059328463f8e51f4db43 s6-dns-2.3.5.4.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-dns/s6-dns.mk b/package/s6-dns/s6-dns.mk index dfde2c29f1..1b7d65570f 100644 --- a/package/s6-dns/s6-dns.mk +++ b/package/s6-dns/s6-dns.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_DNS_VERSION = 2.3.5.1 +S6_DNS_VERSION = 2.3.5.4 S6_DNS_SITE = http://skarnet.org/software/s6-dns S6_DNS_LICENSE = ISC S6_DNS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:30:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:30:26 +0100 Subject: [Buildroot] [git commit] package/s6-networking: bump to v2.5.1.1 Message-ID: <20221030223042.736DB876EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1a236c99f4ec2f52fa2baefe5a21190ab623cfc7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0 - s6-dns dependency bumped to 2.3.5.4 - skalibs dependency bumped to 2.11.1.0 - execline optional dependency bumped to 2.8.2.0 - s6 dependency bumped to 2.11.0.1 - The obsolete minidentd program has been removed. - LibreSSL optional dependency bumped to 3.3.4 - LibreTLS optional dependency bumped to 3.3.4 - Client certificates are now properly supported in s6-tlsd-io. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-networking/s6-networking.hash b/package/s6-networking/s6-networking.hash index 9e333866d3..1890f95221 100644 --- a/package/s6-networking/s6-networking.hash +++ b/package/s6-networking/s6-networking.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a3fbca789dc5c82b3055fdbd2f55110902198f3136447617ce8f8b79fa8aa554 s6-networking-2.4.1.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 7ac79d4de3d9c13532e444ab7497c4e04ad0fa7229d502984d9dc7d48aa64418 s6-networking-2.5.1.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-networking/s6-networking.mk b/package/s6-networking/s6-networking.mk index 03807f0652..f740f22635 100644 --- a/package/s6-networking/s6-networking.mk +++ b/package/s6-networking/s6-networking.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_NETWORKING_VERSION = 2.4.1.1 +S6_NETWORKING_VERSION = 2.5.1.1 S6_NETWORKING_SITE = http://skarnet.org/software/s6-networking S6_NETWORKING_LICENSE = ISC S6_NETWORKING_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 30 22:34:40 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:34:40 +0100 Subject: [Buildroot] [PATCH 1/1] package/log4cxx: bump to version 0.13.0 Message-ID: <20221030223440.678755-1-fontaine.fabrice@gmail.com> Drop patch which was merged: https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 and updated: https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 Signed-off-by: Fabrice Fontaine --- ...nly-check-for-boost-if-really-needed.patch | 36 ------------------- package/log4cxx/log4cxx.hash | 4 +-- package/log4cxx/log4cxx.mk | 2 +- 3 files changed, 3 insertions(+), 39 deletions(-) delete mode 100644 package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch deleted file mode 100644 index 7df29ea120..0000000000 --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 28 Jan 2022 13:11:01 +0100 -Subject: [PATCH] boost-fallback: only check for boost if really needed - -- only check for boost if really needed (in case of legacy c++ standard < c++17) - -Signed-off-by: Peter Seiderer ---- - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake -index 8285b0b9..0ecf8c6c 100644 ---- a/src/cmake/boost-fallback/boost-fallback.cmake -+++ b/src/cmake/boost-fallback/boost-fallback.cmake -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") - -+# search for boost only in case needed for legacy c++ standard < c++17 -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) - find_package(Boost COMPONENTS thread) - if( ${Boost_FOUND} ) - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") - endif( ${Boost_FOUND} ) -+endif() - - # Link the target with the appropriate boost libraries(if required) - function(boostfallback_link target) --- -2.34.1 - diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash index 12633c8e57..8190f94aa3 100644 --- a/package/log4cxx/log4cxx.hash +++ b/package/log4cxx/log4cxx.hash @@ -1,4 +1,4 @@ -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz # Locally computed sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk index d20cc792a6..f50267d737 100644 --- a/package/log4cxx/log4cxx.mk +++ b/package/log4cxx/log4cxx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LOG4CXX_VERSION = 0.12.1 +LOG4CXX_VERSION = 0.13.0 LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz LOG4CXX_INSTALL_STAGING = YES -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 22:38:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:38:57 +0100 Subject: [Buildroot] [git commit] package/s6-rc: bump to v0.5.3.2 Message-ID: <20221030223916.38B7D876F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3b27e969fd75018b3df0a01d4e5d6bc67db562af branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - execline dependency bumped to 2.9.0.0. - s6 dependency bumped to 2.11.1.0. - s6-rc-compile now reads service dependency information from the dependencies.d directory and bundle information from the contents.d directory, instead of the dependencies and contents flat files. The old format is still supported, but deprecated. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-rc/s6-rc.hash b/package/s6-rc/s6-rc.hash index 8978d68ba6..0a84345e36 100644 --- a/package/s6-rc/s6-rc.hash +++ b/package/s6-rc/s6-rc.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 2a8d1cd455c05c8502b34517cfe79841aa46d08ad969076b37a15d3910617f89 s6-rc-0.5.2.2.tar.gz -sha256 4a5e44a69d649f0c37b29d7f6e5df1bb292b09898247be07f0c97814dac4b15d COPYING +sha256 4f24a4966a4aa353d2bd1a8afca9b88c7b7bd29c46b3a1a7f5305686b9d6e038 s6-rc-0.5.3.2.tar.gz +sha256 1898df1e8703bd9c1350d2ec3397880b9b4c1451038a9ce5e1c4b2e58622da39 COPYING diff --git a/package/s6-rc/s6-rc.mk b/package/s6-rc/s6-rc.mk index 05d7989735..85b047883b 100644 --- a/package/s6-rc/s6-rc.mk +++ b/package/s6-rc/s6-rc.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_RC_VERSION = 0.5.2.2 +S6_RC_VERSION = 0.5.3.2 S6_RC_SITE = http://skarnet.org/software/s6-rc S6_RC_LICENSE = ISC S6_RC_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:40:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:40:41 +0100 Subject: [Buildroot] [PATCH 0/9] bump skarnet software: s6, execline, mdevd, etc. In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221030234041.67e512cf@windsurf> Hello Joachim, On Sun, 9 Oct 2022 17:59:28 +0200 Joachim Wiberg wrote: > Joachim Wiberg (9): > package/skalibs: bump to v2.12.0.1 > package/mdevd: bump to v0.1.6.0 > package/execline: bump to v2.9.0.1 > package/s6: bump to v2.11.1.2 > package/s6-linux-utils: bump to v2.6.0.0 > package/s6-portable-utils: bump to v2.2.5.0 > package/s6-dns: bump to v2.3.5.4 > package/s6-networking: bump to v2.5.1.1 > package/s6-rc: bump to v0.5.3.2 Thanks, series applied. One thing that was missing from the commit logs is the explanation of why the hash of the license file is changed. So I checked why, and added the explanation in each commit log. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 22:43:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:43:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/msmtp: security bump to version 1.8.22 Message-ID: <20221030224328.684577-1-fontaine.fabrice@gmail.com> - Fixed a security problem in msmtpd: mail addresses starting with '-' could be interpreted as options of the pipe command. https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS Signed-off-by: Fabrice Fontaine --- package/msmtp/msmtp.hash | 4 ++-- package/msmtp/msmtp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash index 1e73d92470..c5571f2fb3 100644 --- a/package/msmtp/msmtp.hash +++ b/package/msmtp/msmtp.hash @@ -1,7 +1,7 @@ # Locally calculated after checking signature -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz # Hash for license file: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk index 3db36f4cd0..c3928ffcbb 100644 --- a/package/msmtp/msmtp.mk +++ b/package/msmtp/msmtp.mk @@ -4,7 +4,7 @@ # ################################################################################ -MSMTP_VERSION = 1.8.14 +MSMTP_VERSION = 1.8.22 MSMTP_SITE = https://marlam.de/msmtp/releases MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz MSMTP_DEPENDENCIES = host-pkgconf -- 2.35.1 From paul at crapouillou.net Sun Oct 30 23:04:10 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Sun, 30 Oct 2022 23:04:10 +0000 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build Message-ID: <20221030230410.982946-1-paul@crapouillou.net> Add a patch cherry-picked from upstream to fix the build with GCC 12. Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. I don't know if it fixes any autobuilder errors, I noticed the bug when building locally. Signed-off-by: Paul Cercueil --- ...ibmatrix-Add-missing-utility-include.patch | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 package/glmark2/0002-libmatrix-Add-missing-utility-include.patch diff --git a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch new file mode 100644 index 0000000000..2a658393ae --- /dev/null +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch @@ -0,0 +1,29 @@ +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 +From: Alexandros Frantzis +Date: Mon, 14 Feb 2022 13:54:09 +0200 +Subject: [PATCH] libmatrix: Add missing include + +Fixes compilation with GCC 12. + +Fixes #169 +--- + Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a + + src/libmatrix/program.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h +index f95b470..1c9de08 100644 +--- a/src/libmatrix/program.h ++++ b/src/libmatrix/program.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include "mat.h" + + // Simple shader container. Abstracts all of the OpenGL bits, but leaves +-- +2.35.1 + -- 2.35.1 From james.hilliard1 at gmail.com Mon Oct 31 01:09:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 19:09:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir Message-ID: <20221031010904.1109541-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, as such we also need to set --with-dbus-busdir which would otherwise be pulled via pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- package/iwd/iwd.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..e53ae595d7 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ --disable-manual-pages \ --enable-external-ell \ --enable-dbus-policy \ - --with-dbus-datadir=/usr/share + --with-dbus-datadir=/usr/share \ + --with-dbus-busdir=/usr/share/dbus-1/system-services IWD_DEPENDENCIES = ell ifeq ($(BR2_PACKAGE_READLINE),y) -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 02:54:23 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 22:54:23 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221030212920.3dd30baa@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221030212920.3dd30baa@windsurf> Message-ID: On Sun, Oct 30, 2022 at 4:29 PM Thomas Petazzoni wrote: > > Hello James, > > On Fri, 14 Oct 2022 18:58:13 -0600 > James Hilliard wrote: > > > The bearssl package is not compatible with parallel builds. > > > > Fixes: > > - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > > > Signed-off-by: James Hilliard > > --- > > package/bearssl/bearssl.mk | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > Based on the feedback which said that fixing bearssl was preferred over > using $(MAKE1), I have marked this patch as Changes Requested. Could > you see at fixing the bearssl build system, submit the fix upstream, > and provide the fix for Buildroot? I contacted the maintainer as described here https://bearssl.org/contrib.html with the suggested change, so far I haven't received a response back. > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 06:34:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 06:34:59 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-30 Message-ID: <20221031063506.F276240246@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-30 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 0 | 1 | 3 | 2022.08.x | 9 | 17 | 0 | 26 | master | 130 | 272 | 14 | 416 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 22 glibc-2.36-66-ga1dc0be03c9d... | 17 libcurl-7.86.0 | 16 host-lzo-2.10 | 15 brltty | 12 host-ninja-1.10.2.g51db2.ki... | 12 imagemagick-7.1.0-51 | 11 host-binutils-2.38 | 10 host-f2fs-tools-1.15.0 | 8 crun-1.5 | 7 host-sentry-cli-1.59.0 | 7 linux-6.0.1 | 7 host-cdrkit-1.1.11 | 6 dash-0.5.11.5 | 5 host-go-1.19.2 | 5 host-pahole-1.24 | 5 unknown | 5 gerbera-1.10.0 | 4 gobject-introspection-1.72.0 | 4 host-rust-1.64.0 | 4 xz-5.2.7 | 4 f2fs-tools-1.15.0 | 3 igd2-for-linux-2.1 | 3 libshout-2.4.6 | 3 lz4-1.9.4 | 3 apitrace-10.0 | 2 brotli-1.0.9 | 2 dahdi-linux-3.2.0 | 2 efivar-38 | 2 fontconfig-2.13.1 | 2 gensio-2.5.5 | 2 host-binutils-2.37 | 2 host-binutils-2.39 | 2 igh-ethercat-1.5.2 | 2 linux-5.10.145-cip17-rt7 | 2 lzo-2.10 | 2 mbedtls-2.28.1 | 2 musl-1.2.3 | 2 rauc-1.8 | 2 sdl-1.2.15 | 2 uclibc-1.0.42 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.34 | 1 alsa-lib-1.2.7.2 | 1 bash-5.1.16 | 1 batman-adv-2021.4 | 1 bdwgc-8.2.2 | 1 botan-2.19.2 | 1 cairo-1.16.0 | 1 cmocka-1.1.5 | 1 easyframes-0.4 | 1 elfutils-0.186 | 1 expat-2.5.0 | 1 fftw-quad-3.3.8 | 1 file-5.43 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gnu-efi-3.0.15 | 1 gobject-introspection | 1 guile-3.0.8 | 1 gummiboot-2bcd919c681c952eb... | 1 host-gcc-initial-10.4.0 | 1 host-spirv-llvm-translator-... | 1 jpeg-turbo-2.1.4 | 1 kmemd-1.0.0 | 1 libgcrypt | 1 libglib2-2.72.3 | 1 libgpg-error-1.45 | 1 libkcapi-1.4.0 | 1 libndp-1.8 | 1 libnl-3.6.0 | 1 linux-5.10.145-cip17 | 1 linuxptp-3.1.1 | 1 lirc-tools-0.10.2 | 1 ltp-testsuite-20220930 | 1 lxc-4.0.12 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mmc-utils-d40ec535b9d4e4c97... | 1 moby-buildkit-0.10.0 | 1 ntp-4.2.8p15 | 1 ocf-linux-20171122 | 1 open62541-v1.3.3 | 1 procps-ng-3.3.17 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.3.post0 | 1 sudo-1.9.11p2 | 1 wavemon-0.9.4 | 1 x264-baee400fa9ced6f5481a72... | 1 xvisor-0.3.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/45650f73a497700bcecbaf2a556be7c3d533fb90 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a908f676bdfa2d0ee549eda9cdae8f440b708289 | riscv32 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e303f6ef097b18ed3cf61c44e320f2bb35f423f0 | s390x | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/62a9cd20f129f50dfe754ecbb3e2cee42b6d4941 | mips64 | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/a240a28f90b57e1c22d47f1262f02dcdbbecd47f | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/392d4114e218031ec9b89a367108a854f8352285 | i586 | apitrace-10.0 | NOK | http://autobuild.buildroot.net/results/0354f263c2d17db0a282777811e3c3d555148b9c | i586 | apitrace-10.0 | NOK | http://autobuild.buildroot.net/results/8a172500a00817824e3138f67545268143733d67 | powerpc64le | bash-5.1.16 | NOK | http://autobuild.buildroot.net/results/0c1b02c6a91dd81be698dce38043f4e6b9ddf826 | ORPH or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 | riscv64 | bdwgc-8.2.2 | NOK | http://autobuild.buildroot.net/results/16d6c4095de182c5a07d22c936c1ad1c7d78ab07 | x86_64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/cf113c389f68a92ac1b20c99d5b116bdf9e26cb6 | ORPH sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/858fecba9bc607366762f4254f5759101b5562c0 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/7293c7a5205b4814de1fe6fe95fe37c5a112766a | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/61a7a69e0e8216764d34732bbfa78115d5adf9b2 | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/e41ca907912a9822fd1d599133d187d47f753674 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/9e5b28a9aa6e1d2136577d896257b1891ed41e86 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/01734f374bd72606b9c67018d6fae2e3186e5ba9 | arc | brltty | TIM | http://autobuild.buildroot.net/results/e49527e2a3a08a98b60456c06c5557570550a77b | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/1cbbfcc089586efb9e29557e725e052c4f8ed912 | sparc | brltty | TIM | http://autobuild.buildroot.net/results/bb744b2370c37e9f5e6888c3ef0c7000c0dd4e4b | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/3b0623fd0d9d82bccf21ab3808291698356c5f34 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/2b053c13733040306bb1f4c5ad7131ab62feb4f3 | xtensa | brltty | TIM | http://autobuild.buildroot.net/results/b73879c3e7513f9e2b77d9c2b226cd249cf4e17e | mips64el | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/b2aa7dfa99d0ad4dabc60406bc7e18a3ea553c19 | powerpc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/490618437029e0fa8349d05a10562ae81c2d900e | or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/7467a8ec9f93ee6428f18f4c9812f8359ab9fd69 | x86_64 | cmocka-1.1.5 | NOK | http://autobuild.buildroot.net/results/0b5afcb99f4b186524c8c628213503c9c7eb7f74 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/210939b07aafacfdfea56bdf56a12f38f25f481a | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3b6cef90189cbe021525668362c149505616fa57 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/578fc2735388fc0bd4fd2e1ae1437128828f6472 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f5d01b5fcf05eb561f16fc048afff1540c185828 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c46e74937122933e93c94e7504063b3c4cc95bf | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/812c278df17718ad97685d801ab22ac0fb568374 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6741f6e73138116fd66d262a266ae31f0e73a692 | sparc64 | dahdi-linux-3.2.0 | NOK | http://autobuild.buildroot.net/results/3fdc39737e3edfe69ee5842184f959d6ce4eeb24 | powerpc64 | dahdi-linux-3.2.0 | NOK | http://autobuild.buildroot.net/results/ddacd807dddeb1649e957264ac57bba27d9bb463 | mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/cb3bc6e599001dfad1faec054433d6460337180e | ORPH aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d3d08c8f9dd7cbaaccf3bdb762af436ca077cd03 | ORPH aarch64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bb9ce52d0eb49d2f3e9b7da44a0768248e19de8f | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/55161c49409f0237fe4db4cb188bc9ccf87ab250 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0a0e6061ca9fe2d45fe043381a79a09043db4d7d | ORPH mipsel | easyframes-0.4 | NOK | http://autobuild.buildroot.net/results/d8b9055648fb7845b3eea07e50e119d4c2cbd342 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/ab09480316089da1597a943717a2c1dccec90bd6 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/ae5047d670db58f6d6aa5bd470c8e0023261e6b2 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/711014e227e4bd38db2924156f6d21eb787a5dfb | ORPH powerpc64le | expat-2.5.0 | NOK | http://autobuild.buildroot.net/results/24c1f21a10ae57f21f5b11860a1f1726ee577d48 | riscv32 | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8c6125734f64160f8ec99332bcbb92c34b65ab5a | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/186a4aa6bf19888e8c5b0071f447883f56954382 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d09e2497ef531b5ef54ac8f334a439735161056 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/736fe05b4d4a404c4b5d6129179c5ac583681a26 | ORPH armeb | file-5.43 | NOK | http://autobuild.buildroot.net/results/4fa22f6975ff134fa70b075d876a7c4d1aa0192e | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/fbd45dc632df77a49d2a606dcca71b0d1f403825 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/e358f35ada4e73294df15c43c1262ff59cfc121d | ORPH powerpc64 | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/cc2b7f4f3bfac64b7d55e231438603a7ce20afe9 | powerpc64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/92e5a7efc769614462da19d8d790f1b47788cc9a | or1k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/05c06f63393e96b568ed05388c9792586f496170 | sparc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/89ab85192c253cf6d6ba8b7befc3a4ee6d6acd8c | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/42487089e1d823606370467f7f376be45beda770 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/363fd8361bd8c9c4e6839c2b63c5e208422807e8 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6541a9f28c1eee90f61eb0e4ea53d7bbc6abbedf | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6743f28353ea6c363d07da4c46e5397f40d89ea1 | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d876bc011a19e4e7a80b6747d09b732bd04300b6 | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ad4ebf7694120d3f72506e3b26af67072d073317 | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/0de276a3587cd87a0c4285988446afd4c48d7c70 | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/af0536d4d9bf68102f7eaac6ddc28a0277e2e52b | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/05f08e3cc71795f312d59e9b74010edff629d6ff | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/303539915f221967d666a0a66605761f506566bf | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/4dd11657ee7f4b3dcf5195b597afb06df2f56667 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/40130e8d51b8a12a9005ee71d3f402da10a1ae18 | powerpc | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a44bd2d81eea6059d5ab696455c161a0d47b271c | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/864d08d7c55fcf6702d6aaf39cdd90d43b5da1a5 | or1k | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/74f6802d60b6af305257c90089b5b1cf96f0f48f | powerpc64le | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/3179bf850e5bda3fac252aec05b3e863a0cbca65 | sh4 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/6cc11ca48059f19487fb44eef68197314321540b | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/8fee4b8431fde83120d68c7d86a17e481944208d | sh4 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/4af10a816520d331ba92e769f8191a94b81dc4b7 | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a743d88fc0bea78f5451c8c52cfb4c5fd144a4b0 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/5125453ebc89bdea7d0f0cd64b0029b3dd2f650f | riscv32 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/ca252ff3e0317c28443f5ab98b17cd2b4faff58e | sh4eb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a82784fee356d3284edfc5590516e817f01efcc1 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/7bd52aeae2d58aca787e89ee54b250e0ebd5a228 | ORPH mips64el | gnu-efi-3.0.15 | NOK | http://autobuild.buildroot.net/results/a1c1812382e5ca23360038dd0120383685ae0c28 | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/53f91f88fffc616152861d04b771393c09adeafd | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/559bb5a6799261d1f0f5cc7ce39287493652508b | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4c333c4b552aa7ece0f7454efe43e32d96b4b720 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/edd3d0d225dfb23bdb669639f2d784683eb19a5a | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/09579c0c9e8795d59122bd6c936e75539a64dcf2 | ORPH mips | guile-3.0.8 | NOK | http://autobuild.buildroot.net/results/ea1930d2d57b9017a1ab914f934d1558b3bd98c5 | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/9f706b9c90bfebf8a76fc2d54da7617dbfd000a3 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/6d860b3768e7c76f40e83924fcf4fc952363f2b8 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1e08dc58fb1ebcd5545bfac58f990c41d782fb5a | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/78ba062bc6a496a858ee7ec22f01829aa033157b | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3c9c707f943745a7c3845c00818901ccf0e34c6e | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5230bf439a3c82b43a06d27c15b956a10b74bf11 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8460680ad4d12e4c1835a65bc29e2a92b75e77dc | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/aa4059b33a220ab31c3deb73f62b0e5a6d5c7d80 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/46f1e306e6a4d62095280204a10f84887b8b089f | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6a79a21921ea760af6c8ea4dc01ac968f6ea0fe9 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/834db8fd3334154bb7ed23f911f3520488cfbc89 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d3fa65f7de625dc79a1068e9162414c8bf7914c4 | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e8edcc422e63ac547d8a3153a9386ce821912768 | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/68cf24bb1ba1492afd68b37c8c94ffe092541611 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/a233a85050d0bbed69d7c563a98ccab95711e211 | i586 | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/4e34c37ef48e527b820d100dc23d575daf362bba | or1k | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/2f3b7e41e0f10e4894285d9c833f366be888d9dc | sh4aeb | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/1f7e48209fc6bd481ce34c6ddfa2fa8cf5c0dcc5 | mips64 | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/81992c95851693a9438112e92846ba4cafb6dec5 | arc | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/da806ed2f18a56334123a45cce1b2fe1700f7f0b | sparc | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/101ca112613ef232a489712692489c6a760cdc50 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4647c12735173ce8f89b255d1cfba91db7af5bab | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/90d8d55916a002d9740948e873e5546e0894bea1 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5f9d9ba35a4596834e91de9a8ba850f32c329fb | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/94368a328f382bb87f58b051649e41d7c5c95c7d | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/11e2d3d74b0c6f8ea324078418a6847ec24b6297 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2c64d596fb5a433a4448f9fdb990fc4210722e62 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/307f41bf09da1abd59a948a081589fdffa6747b0 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/97e03d10dcb049d3bf1355455b6ac0cd1070137b | sparc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/43dfe23c883e6f4e68b98030a3e6dd1e045ec1d8 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/79abb73e76dd5d2186c3f042ea85c992e2fa01e8 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/c9941a19f99e1d4ec7e1c8b9d6e969362ffc40e2 | mips64 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/ff39dd9ec14f1a940a9c9c54c19dad00e3d5f219 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/cfedb14b151996ee9ec30a749f8a20b1d9b314b3 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/8ab33d61dc0bcccf43e531e19089a9d2084bd5b8 | powerpc | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/a5f34cca49ed4c7672505ad180009723088fb66b | ORPH powerpc64le | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/f630f3d4610b8a0c9a8150d28fe689dec304bffa | ORPH mips | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7e52a08445dd715afabbb4c1c84ab44d856d6c4f | ORPH powerpc64le | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/91bd4f57d50e7d8deaf9eaf02a2f542a367622e2 | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/babcb91ca1806af3b38869a1794ec75ae7167527 | ORPH mips64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/39f0e86c4f8a8460bec998b80f0649d9afa74359 | ORPH powerpc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/080465565a5eab0ed08cc8a0998a4bde551e83f8 | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/62c59baa3283b9286b6cbebfcd62009561ebd151 | ORPH mips64el | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/351d791ace5a5be6b3142ed7fd1849cd3d562056 | ORPH microblaze | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/f329e4f76a42af06ee6405eb235a18bce89932d6 | ORPH powerpc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/9f9b1707e4b7339f4aabc40332e879b6b4ba36c3 | ORPH s390x | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/349dbfae4ebaf0f67f69965cc1c4ba479120091b | ORPH xtensa | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/d7f8e758a859aabd90d3b31d5b9cc2bfc9e09f59 | ORPH sparc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/e7f423ce71ffc4e72c926cdbf836e0b4a6917686 | ORPH powerpc | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/3768894b015e379c7b3087da77850c939864a6c1 | ORPH aarch64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/bf5bbefff974ae5a7ceffab7c0994c753e202d33 | powerpc64le | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/0d739c853045bb5c1331f31650c50bf7bda95963 | armeb | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/661019c71986bc0239082a6d72a45886b60399a1 | arc | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9 | or1k | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/f073a90c6a7844beaa4367f6066951e21db664e5 | sparc64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/c090077de1d5118e992e8b4cf7fc37c19de2fb25 | microblazeel | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/a73309d5f3847266ab421fbad528d7668ce69b89 | aarch64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/4a1ed71f5a2c80adc9b526b8e8fff7535456cbe9 | sparc64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/859b0e39d346ccda4343d710ad90f4e9538314d2 | powerpc64le | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/78f88daee095efc122c79f189c5d81a0effeee50 | mips64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/ca9e950a291f80fd297d622ecf77f96bcce4d032 | xtensa | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/723af5afcae0e57dfe7479742196c64f1dd2ea83 | mips64 | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/117cdd88ce1928bdbc2e6b76661e855c29ff2860 | microblaze | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/4c3daffd2c9a1524bbd33bf9ea60d89050c47348 | microblaze | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/a554eeca75a44c40d1601f0036f81fb06b90ff47 | arm | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/25155c7926a9b232362ded894a23d7ddce3cefa0 | mips | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/47bb5724d3917f47d6e8af751d360c46883d3d38 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ede194346bcbb39f0269a7a8f34daffd27ecea0b | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/cfd7262b0b5228b08569d676bdc74d17f79da9ca | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ea781f3d6139742171c99f356141ba633b3b976d | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/fd4edfd6dd82b6c4390513a4dc46ebd918185188 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5da46dbd0fb656431e458286aef72672bfa5384c | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/92d44b1c9f1131ebd98b5a2b14f522dcbaae14a7 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/57f43a3168afc1484fadb89962fe1dac0352acc6 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5445dcdb6dd22698de7e8c66ba224e93526a4f5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a3e42f5e9c03ff17fa4a2ef916af4ea867664795 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/21a4f7dac92557c28a2cdb17a6952ec7d91c78eb | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/493cd47849d1bfb7a8c80748c43f5e3dc1038576 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/d7b3648ba1519c0f4251186a57496cdee1269f16 | ORPH x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/258248222c8dda465f74d186b708a1d676404335 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ce28b00b94da94cb03c7819705caef21fc29f6c9 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/962517db0fa3b3a52481b8f282cd34f68ca4ce08 | or1k | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/dbb5fc18d95c9e137ee760657f1c05fb616ad51e | microblaze | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d11bd07fe5830a4f50ebda913bdc7be87a87c9f | arm | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/0b8cd2e154915dedda2ff4cd54aaaa30b912a47e | ORPH m68k | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/4ed9c3c57e258affba21b7e79e5922b90b219162 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/35c18d789ada03bb3835bb79a56de93bb4fcf652 | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/9b698136ff46eae37f9ab3ad8f0bbdb032707ef7 | ORPH x86_64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/868c7f8b650d48533566bf78e21224b1e1e83330 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/6d5fdb67716fbd4d1876a241f0274dbc0e95725c | ORPH sh4aeb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/7d166174cc0b4c13f360e47c2da04ec94db1b522 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/81b624d55f341e75a88cc88e945ef7704ec75f5a | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/e2b18c9c2b7a7c46cd8d0e966c79d0e35721b75f | ORPH i586 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/c8ebb194188fe362453fe923a5faa4a13ff9705f | ORPH i686 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/47f5b32967f0bf326a5278dc1b2c255e6dc04a00 | ORPH or1k | jpeg-turbo-2.1.4 | NOK | http://autobuild.buildroot.net/results/306b26041ecb137310095e8e596b333dca8ed7b6 | arm | kmemd-1.0.0 | NOK | http://autobuild.buildroot.net/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc | mips64el | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/2a00d77a037827b37d6187c79d35d00c62cb5ffb | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e54457e0490e2959a207d97f2ff22397f8aba539 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b4340e2217fe9aa2c89ef4f08c88a12374b20ba3 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a4b88956176052a89010cf5488b75558397733f2 | aarch64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626 | microblaze | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711 | powerpc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/3ce36670a862caebf312a69f8156139f418aa96a | powerpc64le | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/0b00afbf97879c5d98a01cffe8baadc630d14af0 | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b0fe815d894449b58f723a1a35fc5f2ccef7693b | i686 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/35bc1163c5bb2cc83c7ccaccc235a2b5ac9f4e36 | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/6bee9c2adc574ff5846d224f6c788bf9e18fe2fb | mips | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a1cd06f096ff26965a952e95de33be483459d597 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b439a7d4b979d219bfe495e15728cee87f51cbd8 | mips64el | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ead03bdafb60719d9e7f68414b6c7f73f7738ad1 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/5e1fc51442837bbfc1671cfd66ac310dc34c9340 | armeb | libgcrypt | TIM | http://autobuild.buildroot.net/results/b266a325c4cb78b8e7488e4238cd17d19535a739 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4196500c433574375a4162dd219ef2386a189234 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/aece750089140eb0ca5af09f4fe1aa53604fc49d | ORPH or1k | libkcapi-1.4.0 | NOK | http://autobuild.buildroot.net/results/33898f1891079164279a9b3d2e424fe42eb978cf | ORPH riscv64 | libndp-1.8 | NOK | http://autobuild.buildroot.net/results/cba2b1f822ce566eedebce5801e67c6b8cb90796 | mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/9ac863d1d62f92301d8d7d6c103e3c1dcdf15bdd | ORPH powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7518320805500e7f846169ffee5763802150d91a | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9269efe011982e63642840184e38947cdd615baf | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e29b18d01779024809130c7c16e0a06a9d1494d3 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a9b8338c32f8ba8bc8776dcd35988a4c125c52ec | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d1573ad6315e268bf852d1df6fd3ed58f43122a9 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d9efedabaa2c2b7174a86e09b1e66de56cf8418 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ed535ad77793174f6b631b1a847e338c4c61ac73 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e61177a87abeb74b21bebccf4150b8718ec97f52 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c1d081e4384074dd65c1e22534ca5b8fa1e4d85 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d4813926b5b04f570e89696f5a7e7f35aa0f905 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e63a90eb10daabd15868aa9f5434ecc8fa59184c | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7396e0e2da462e7466324f287b97cfe3eca89481 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4eec1670a5b1911c5da3a37ac4291cc6568e6b90 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/004e402e21d07575eaf72932ab20e83123ee150a | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9276ca0c9c799ffe70075dca8a34c9baf22760f2 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e837b1dade11732f44be56683ec91fcf1a641ef5 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1268a23e7f3189e5e872008ae25c548922053b1c | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/71e20bf57a66f6af3242b46a7b8c70706fe5843c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/dc63527ec64fabd47f2cf7796992d9cb90492371 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/bee26320b9430b9923fcab9e6cb18d4af191ef82 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f9fe0fd33be737651919ed790ebebb92ea76765f | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d4b4f57f707fd9e5d507c6209de32eaa6d48856 | aarch64_be | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/9ac1fb9cd408e049504377742b554904ca3e81c3 | ORPH mips | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/4c7de2e167643d10f4b2b91640782ab09cb6457c | ORPH s390x | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/32765c5952210a01c900e61694f12431b5643864 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/71dbdc42922119e7e95a79f87a1c92e2704d5a2d | ORPH powerpc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8978fc9d033f6c8372bc405a2d2b98f28e1c9564 | ORPH mips | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3099263bd594bac523a4206231288c1663aef552 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/0308724d58394d89a55d9e2813b545c2ba90e896 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7ec8bed55e3d0ca31e5dfa44bc4acd13afd3189c | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a927a5466a1181c09a0daf54c3ea7b8ab29b6de0 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b3074c78afcc34fd40c81e113dc3217be6840563 | ORPH aarch64_be | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/dfcd3d6c907be6be6456c5e8722bf606ba62da5f | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3d3565e3a8621e792e270d05be4adf53f0818cef | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1022366f18cefe7b9036e24258b67001d4df613e | ORPH s390x | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/a77238888c284c397edf7eaaac7330d2a99d7770 | arc | lirc-tools-0.10.2 | NOK | http://autobuild.buildroot.net/results/7a983337d502d51d0f9156751ea99e14e3b4467e | ORPH i686 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/939df2d8736d047f007070f9cdec8ee976803a6b | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4b068c8496c28ca887d0f65464b6402935d5e540 | sparc | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/5dac8186a199ba8d44fc272a4b874614863ef60b | ORPH arceb | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/9169a0d5753d537ec34a96f608b5f76a7e2143bf | ORPH mipsel | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/87372afab6684558136fce430cce98e0bf3cecac | ORPH or1k | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/0e51f1180c9387ebbc76ea5d8c3750ff3c8c2070 | ORPH riscv32 | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7158750ac07d000c10a97c5f43a6f4aac142950f | ORPH powerpc64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/680c5c10d276eab1a3c4e1cfd367dcd9dcce37ad | mips | mbedtls-2.28.1 | NOK | http://autobuild.buildroot.net/results/5b16e01c262ce6054a8743cbc2ca362c602a9a21 | mips | mbedtls-2.28.1 | NOK | http://autobuild.buildroot.net/results/15fc1c40d4f17c713854dcfc4d32f074f5232166 | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ba89f3460c5678ef7da87a43f4759e96da11dd59 | ORPH mipsel | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/b2c68f7308e505451c83265ff537eb0254bad036 | s390x | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/f44a23ced294e164d1242f029f06ee9e7e31c892 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/d1facd0cf37142b83318214274f751571d3747f7 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/81112a989668d3aad19da2fe2a2f29bf4412a041 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/496fa91a208650b9825ee4dc941ab9f421d054ff | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6e56c8017c8523804ed7c316298e37516826768d | ORPH arc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/fd7ccc77018db945d29e4a0d095f75d17802694f | ORPH nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/1ed0401f0d7fd69b610e51de5d3cef342c404f6a | ORPH s390x | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/26e13149f79dc7795d09daff36d7fd0c359362a1 | powerpc64le | python-greenlet-1.1.3.post0 | NOK | http://autobuild.buildroot.net/results/e0717d20a389eb23ecaba4384fb44ad01fb0dca7 | arm | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/94ec927e33493d0e7615cce760dffae1a5cb7709 | i586 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/4a269f3b051c63a59eeeca5a5d4ae80877d0344f | sh4 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/8d6467ffdd6f7c38b8d898ee97603a493a8b86b7 | ORPH sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/89e72847034f4771788bc322814134ec890ee4c5 | ORPH arm | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/071e44cb1e5f22d4a5666d8be1d309b6a76d0432 | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0eb0f905bf0ac90cc8e8670f233219ed4b2bce6f | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/8ee1c6b006ec48e5e1378dd5decd7e559cff378d | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/d8138fde31b3bd6d70ffe1e25ad1548708ef8d8b | or1k | unknown | NOK | http://autobuild.buildroot.net/results/b20490b9678517f23f88d56af1f4cb5da89bde38 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/124ebaa4810ca89c6eea22c46d8062b7ed887a24 | i686 | unknown | NOK | http://autobuild.buildroot.net/results/eb13b55e2292b1ad81fee9a4ac64b05c733bb130 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/10163c56794c8a155060dbb1847d507cf72da9a7 | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/f7f43d2a0cbfdd2793ac99c5548aac9b3d291c63 | ORPH i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/ebf252110e2133317685c92084771568d10629b7 | x86_64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/379f401f1669fab6b9df04b7ab87cb2eb9bdb19a | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/575c257e7163d86bcdbd0cf9bcaca9d71d2f3216 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f0749a6a04635db94b7a8b862136cf6fb0effb9a | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8dc9e79418763d1b46a5a47d0ffa66fc36f4063d | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c44125feadc8a4ae3b500ab724fe640d5ea4f6f1 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/41859604d868d25dd85a8e9b82bf9e43b703ff7a | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- mongodb | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | mongodb | TIM | http://autobuild.buildroot.net/results/6660efaba082c1a94e26016ff0fdc806631f6cb8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 erlang-22.3.4.22 | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 host-elf2flt-2021.08 | 1 host-gcc-final-arc-2020.09-... | 1 host-gcc-initial-11.3.0 | 1 libdcadec-0.2.0 | 1 linux-5.17.15 | 1 open62541-v1.3.2 | 1 openssh-9.1p1 | 1 openssh-legal-info | 1 tealdeer-1.5.0 | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/37d74daad05741977ac21acd20cc6c5c9cf6f79a | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/16a40422899fdc78543a0ae7de6c8d441f62a177 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/04f351214b1fa4a2d6737dec678109cb7afdd59a | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/e6959a8ad8b5797dc88622fde5c3d0074a086e8a | ORPH arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/9acee86224c7121f01761066dcf0f4626ad4cd8f | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a1119d0521ee8a418bff314106bb3ea34465783f | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74bba64dba9ca09f82ebd7822bdb3be52ba7971d | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e458d9902ed11b38a4d4ea2c2218fb5bb3bde434 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fe9121b42a4e939a0d8c9709b8c091423d24f103 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/536d87d6d40a64cc008f349480c5b1a477a818b6 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/1015fbb9e0d082bba87cee786a8ce1625722467b | mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/ef3af3e1097bfd1ed5bf5328fa961df7eec22a00 | ORPH arceb | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/ee8940050a2a09017b94efc5733458ff1d9a919b | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/be337411fd15aeab79fe338d8ba86d10c4d8087d | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/6e919ceaf1befb5106cf3829ceb354178beb1fed | ORPH s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/ac57b08c8867729f518e8da5c62c06ec62a7938d | mips | unknown | NOK | http://autobuild.buildroot.net/results/8a693f11955822f3d300a4ea1049c59d02cf4f9a | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpica | DISTRO | https://release-monitoring.org/project/00018 | 20220331 | 20222010 | adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.2 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 20.0.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.67 | ORPH belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.67 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.67 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.8 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.7.2 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.2 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.3 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.1 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.5 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | containerd | DISTRO | https://release-monitoring.org/project/16460 | 1.6.8 | 1.6.9 | crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.19 | 20.10.21 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.11.2 | 2.12.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.19 | 20.10.21 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.10 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.2 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | exfatprogs | DISTRO | https://release-monitoring.org/project/94441 | 1.1.3 | 1.2.0 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.3 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.2 | flann | DISTRO | https://release-monitoring.org/project/21432 | 1.9.1 | 1.9.2 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.20.0 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.10.26 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.1 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gdk-pixbuf | DISTRO | https://release-monitoring.org/project/09533 | 2.42.9 | 2.42.10 | ORPH gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.1 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.5.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnupg2 | DISTRO | https://release-monitoring.org/project/01215 | 2.3.7 | 2.3.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3.0 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.50.0 | 1.50.1 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-shark | DISTRO | https://release-monitoring.org/project/21854 | v0.7.5 | 0.8.0 | gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 72-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH igd2-for-linux | DISTRO | https://release-monitoring.org/project/21356 | 2.1 | 2.2 | igmpproxy | DISTRO | https://release-monitoring.org/project/21357 | 0.3 | 0.4 | imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-gmmlib | DISTRO | https://release-monitoring.org/project/20342 | 22.2.1 | 22.3.0 | intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.4 | 22.6.0 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.4 | 22.6.0 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.25.0 | 1.25.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jo | DISTRO | https://release-monitoring.org/project/18855 | 1.6 | 1.7 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.16-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.3 | 0.3.95 | less | DISTRO | https://release-monitoring.org/project/01550 | 590 | 608 | ORPH libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221030-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.1 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.2 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.16 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.8 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lsof | DISTRO | https://release-monitoring.org/project/01844 | 4.96.3 | 4.96.4 | ORPH ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-lyaml | DISTRO | https://release-monitoring.org/project/11733 | 6.2.7 | 6.2.8 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.67 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH memtest86 | DISTRO | https://release-monitoring.org/project/01966 | 5.01 | 6.00 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.5 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.31.0 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.42 | multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.3 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.2.1 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221029 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 1.0.0 | netcat-openbsd | DISTRO | https://release-monitoring.org/project/21534 | 1.218 | 1.219 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.2 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.2 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 19.0.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.5.0 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+21 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.67 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.16.1 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202210 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.44 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-path-tiny | DISTRO | https://release-monitoring.org/project/11962 | 0.124 | 0.130 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pixman | DISTRO | https://release-monitoring.org/project/03648 | 0.40.0 | 0.42.0 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH poco | DISTRO | https://release-monitoring.org/project/05418 | 1.12.2 | 1.12.3 | policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | polkit | DISTRO | https://release-monitoring.org/project/03682 | 121 | 122 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.1 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.8 | 21.9 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.78 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-automat | DISTRO | https://release-monitoring.org/project/15101 | 20.2.0 | 22.10.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.25.4 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.28.4 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.6 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssselect | DISTRO | https://release-monitoring.org/project/11593 | 1.1.0 | 1.2.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.8 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-jsonrpc | DISTRO | https://release-monitoring.org/project/21698 | 2.2.1 | 2.2.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.10.26 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.21.0 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.6 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 9.0.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.2 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 1.0.0 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.1 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.11.0 | python-pillow | DISTRO | https://release-monitoring.org/project/07974 | 9.2.0 | 9.3.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.8 | 21.9 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.3 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.5 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220814.1 | 20220916.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.10.2 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.6.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pyrsistent | DISTRO | https://release-monitoring.org/project/19676 | 0.18.1 | 0.19.1 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.2.0 | python-pytest-asyncio | DISTRO | https://release-monitoring.org/project/07273 | 0.19.0 | 0.20.1 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.5 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 24.0.1 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.10.31 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.1 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.3 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.10.1 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.2 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b2 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.1.0 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.5.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.4 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.3 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | python3 | DISTRO | https://release-monitoring.org/project/13254 | 3.10.8 | 3.11.0 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.2 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2210.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.11 | 4.17.2 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.2 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shairport-sync | DISTRO | https://release-monitoring.org/project/21384 | 3.3.9 | 4.1 | ORPH shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.45.0 | socat | DISTRO | https://release-monitoring.org/project/04848 | 1.7.4.3 | 1.7.4.4 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | ssdp-responder | DISTRO | https://release-monitoring.org/project/17371 | 1.8 | 1.9 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | strace | DISTRO | https://release-monitoring.org/project/04897 | 5.19 | 6.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.12 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | swig | DISTRO | https://release-monitoring.org/project/04919 | 4.0.2 | 4.1.0 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.3 | 0.30.0 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.7.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.2 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | unrar | DISTRO | https://release-monitoring.org/project/13306 | 6.1.7 | 6.2.1 | ORPH upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.1 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | upx | DISTRO | https://release-monitoring.org/project/13737 | 3.96 | 4.0.0 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valgrind | DISTRO | https://release-monitoring.org/project/13639 | 3.19.0 | 3.20.0 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.1 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.6 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.232 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webkitgtk | DISTRO | https://release-monitoring.org/project/05355 | 2.38.0 | 2.38.1 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.1 | ORPH wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.1 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20221028 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_rgb | DISTRO | https://release-monitoring.org/project/17151 | 1.0.6 | 1.1.0 | xapp_sessreg | DISTRO | https://release-monitoring.org/project/15040 | 1.1.2 | 1.1.3 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xfsinfo | DISTRO | https://release-monitoring.org/project/17158 | 1.0.6 | 1.0.7 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xapp_xsetroot | DISTRO | https://release-monitoring.org/project/14953 | 1.1.2 | 1.1.3 | xcb-util-cursor | DISTRO | https://release-monitoring.org/project/05166 | 0.1.3 | 0.1.4 | xcb-util-image | DISTRO | https://release-monitoring.org/project/05167 | 0.4.0 | 0.4.1 | xcb-util-keysyms | DISTRO | https://release-monitoring.org/project/05168 | 0.4.0 | 0.4.1 | xcb-util-renderutil | DISTRO | https://release-monitoring.org/project/05169 | 0.3.9 | 0.3.10 | xcb-util-wm | DISTRO | https://release-monitoring.org/project/05170 | 0.4.1 | 0.4.2 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xerces | DISTRO | https://release-monitoring.org/project/05182 | 3.2.3 | 3.2.4 | ORPH xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXext | DISTRO | https://release-monitoring.org/project/01774 | 1.3.4 | 1.3.5 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXinerama | DISTRO | https://release-monitoring.org/project/01779 | 1.1.4 | 1.1.5 | xlib_libXmu | DISTRO | https://release-monitoring.org/project/01785 | 1.1.3 | 1.1.4 | xlib_libXrender | DISTRO | https://release-monitoring.org/project/01789 | 0.9.10 | 0.9.11 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xlib_libxkbfile | DISTRO | https://release-monitoring.org/project/01781 | 1.1.0 | 1.1.1 | xlib_libxshmfence | DISTRO | https://release-monitoring.org/project/01792 | 1.3 | 1.3.1 | xmrig | DISTRO | https://release-monitoring.org/project/17499 | 6.18.0 | 6.18.1 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xtables-addons | DISTRO | https://release-monitoring.org/project/07736 | 3.21 | 3.22 | ORPH xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 375 | ORPH xutil_makedepend | DISTRO | https://release-monitoring.org/project/13528 | 1.0.6 | 1.0.7 | yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 openvmtools | CVE-2014-4199 | https://security-tracker.debian.org/tracker/CVE-2014-4199 openvmtools | CVE-2014-4200 | https://security-tracker.debian.org/tracker/CVE-2014-4200 openvmtools | CVE-2022-22943 | https://security-tracker.debian.org/tracker/CVE-2022-22943 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 expat | CVE-2022-43680 | https://security-tracker.debian.org/tracker/CVE-2022-43680 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtasn1 | CVE-2021-46848 | https://security-tracker.debian.org/tracker/CVE-2021-46848 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38171 | https://security-tracker.debian.org/tracker/CVE-2022-38171 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 expat | CVE-2022-43680 | https://security-tracker.debian.org/tracker/CVE-2022-43680 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtasn1 | CVE-2021-46848 | https://security-tracker.debian.org/tracker/CVE-2021-46848 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38171 | https://security-tracker.debian.org/tracker/CVE-2022-38171 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Mon Oct 31 07:26:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:26:34 +0100 Subject: [Buildroot] [PATCH] package/gawk: drop incorrect patch Message-ID: <20221031072634.2986903-1-yann.morin.1998@free.fr> Commit 8cd06967b9be (gawk: bump version and migrate to autotargets) added a patch that purportedly reduced the installation size by not installing the versioned program (gawk-X.Y). However, the versioned program is a hard-link to the unversioned one, so, save for a directory entry, it does not take extra space in the final image. Drop that patch. Signed-off-by: Yann E. MORIN --- package/gawk/0001-no-versioned.patch | 16 ---------------- 1 file changed, 16 deletions(-) delete mode 100644 package/gawk/0001-no-versioned.patch diff --git a/package/gawk/0001-no-versioned.patch b/package/gawk/0001-no-versioned.patch deleted file mode 100644 index c5bbdddeb5..0000000000 --- a/package/gawk/0001-no-versioned.patch +++ /dev/null @@ -1,16 +0,0 @@ -Disabled versioned installation of binaries to save space. - -Signed-off-by: Gustavo Zacarias -[Gustavo: update for 4.1.2] - -diff -Nura gawk-4.1.2.orig/Makefile.in gawk-4.1.2/Makefile.in ---- gawk-4.1.2.orig/Makefile.in 2015-04-29 16:11:09.367925925 -0300 -+++ gawk-4.1.2/Makefile.in 2015-04-29 16:11:25.308466495 -0300 -@@ -1173,6 +1173,7 @@ - # (This is done universally, which may not always be right, but - # there's no easy way to distinguish GNU from non-GNU systems.) - install-exec-hook: -+foo: - (cd $(DESTDIR)$(bindir); \ - $(LN) gawk$(EXEEXT) gawk-$(VERSION)$(EXEEXT) 2>/dev/null ; \ - if [ ! -f awk$(EXEEXT) ]; \ -- 2.25.1 From yann.morin.1998 at free.fr Mon Oct 31 07:28:03 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:28:03 +0100 Subject: [Buildroot] [git commit] package/gawk: fix double free during kernel build Message-ID: <20221031074904.10D5B876DB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e6942ad11ff03a587ba557aa359d2064f2371c38 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport an upstream patch to fix a crash during kernel build. Details: https://bugs.gentoo.org/868567 Fixes: GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c free(): double free detected in tcache 2 Aborted Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- .../gawk/0002-Fix-a-bug-with-Node_elem_new.patch | 155 +++++++++++++++++++++ 1 file changed, 155 insertions(+) diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch new file mode 100644 index 0000000000..502f7dcd95 --- /dev/null +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -0,0 +1,155 @@ +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 +From: "Arnold D. Robbins" +Date: Wed, 14 Sep 2022 21:08:59 +0300 +Subject: [PATCH] Fix a bug with Node_elem_new. + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +baab183439ff4e0c6b77d62156d447e61fc1dcfb] +--- + ChangeLog | 8 ++++++++ + interpret.h | 1 + + test/ChangeLog | 5 +++++ + test/Makefile.am | 4 +++- + test/Makefile.in | 9 ++++++++- + test/Maketests | 5 +++++ + test/elemnew1.awk | 9 +++++++++ + test/elemnew1.ok | 0 + 8 files changed, 39 insertions(+), 2 deletions(-) + create mode 100644 test/elemnew1.awk + create mode 100644 test/elemnew1.ok + +diff --git a/ChangeLog b/ChangeLog +index 5fb25483..cd9d9fcd 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,11 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * interpret.h (r_interpret): For the `push' opcodes, upref ++ the Node_elem_new. See test case elemnew1. Thanks to ++ Emanuel Attila Czirai for the report, ++ and to Jan Alexander Steffens (heftig)" ++ for the fix. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/interpret.h b/interpret.h +index 57d060e6..268655b2 100644 +--- a/interpret.h ++++ b/interpret.h +@@ -238,6 +238,7 @@ uninitialized_scalar: + _("reference to uninitialized argument `%s'") : + _("reference to uninitialized variable `%s'"), + save_symbol->vname); ++ UPREF(m); + PUSH(m); + break; + +diff --git a/test/ChangeLog b/test/ChangeLog +index a73637bf..ea08edee 100644 +--- a/test/ChangeLog ++++ b/test/ChangeLog +@@ -1,3 +1,8 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. ++ * elemnew1.awk, elemnew1.ok: New files. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/test/Makefile.am b/test/Makefile.am +index ab06974c..8a5c3c49 100644 +--- a/test/Makefile.am ++++ b/test/Makefile.am +@@ -282,6 +282,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +diff --git a/test/Makefile.in b/test/Makefile.in +index 834feb09..a4fb1cc1 100644 +--- a/test/Makefile.in ++++ b/test/Makefile.in +@@ -550,6 +550,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +@@ -4476,6 +4478,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/Maketests b/test/Maketests +index 3a667af8..90828e7f 100644 +--- a/test/Maketests ++++ b/test/Maketests +@@ -1432,6 +1432,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/elemnew1.awk b/test/elemnew1.awk +new file mode 100644 +index 00000000..58dc9fcd +--- /dev/null ++++ b/test/elemnew1.awk +@@ -0,0 +1,9 @@ ++function add_flags(old) { ++ if (old) ++ return 0 ++ if (!old) ++ return 1 ++} ++BEGIN { ++ a[0]=add_flags(a[0]) ++} +diff --git a/test/elemnew1.ok b/test/elemnew1.ok +new file mode 100644 +index 00000000..e69de29b +-- +2.34.1 + From yann.morin.1998 at free.fr Mon Oct 31 07:50:30 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:50:30 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build In-Reply-To: <20221030215458.3773991-1-james.hilliard1@gmail.com> References: <20221030215458.3773991-1-james.hilliard1@gmail.com> Message-ID: <20221031075030.GJ1058960@scaer> James, All, On 2022-10-30 15:54 -0600, James Hilliard spake thusly: > Backport an upstream patch to fix a crash during kernel build. > > Details: https://bugs.gentoo.org/868567 > > Fixes: > GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c > free(): double free detected in tcache 2 > Aborted > > Signed-off-by: James Hilliard Applied to master, thanks. That made me notice some cruft we've been carying for gawk, if you could have a quick look (patch renumbering missing, I sent it before applying your patch): https://patchwork.ozlabs.org/project/buildroot/patch/20221031072634.2986903-1-yann.morin.1998 at free.fr/ Regards, Yann E. MORIN. > --- > .../0002-Fix-a-bug-with-Node_elem_new.patch | 155 ++++++++++++++++++ > 1 file changed, 155 insertions(+) > create mode 100644 package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > > diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > new file mode 100644 > index 0000000000..502f7dcd95 > --- /dev/null > +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > @@ -0,0 +1,155 @@ > +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 > +From: "Arnold D. Robbins" > +Date: Wed, 14 Sep 2022 21:08:59 +0300 > +Subject: [PATCH] Fix a bug with Node_elem_new. > + > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +baab183439ff4e0c6b77d62156d447e61fc1dcfb] > +--- > + ChangeLog | 8 ++++++++ > + interpret.h | 1 + > + test/ChangeLog | 5 +++++ > + test/Makefile.am | 4 +++- > + test/Makefile.in | 9 ++++++++- > + test/Maketests | 5 +++++ > + test/elemnew1.awk | 9 +++++++++ > + test/elemnew1.ok | 0 > + 8 files changed, 39 insertions(+), 2 deletions(-) > + create mode 100644 test/elemnew1.awk > + create mode 100644 test/elemnew1.ok > + > +diff --git a/ChangeLog b/ChangeLog > +index 5fb25483..cd9d9fcd 100644 > +--- a/ChangeLog > ++++ b/ChangeLog > +@@ -1,3 +1,11 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * interpret.h (r_interpret): For the `push' opcodes, upref > ++ the Node_elem_new. See test case elemnew1. Thanks to > ++ Emanuel Attila Czirai for the report, > ++ and to Jan Alexander Steffens (heftig)" > ++ for the fix. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/interpret.h b/interpret.h > +index 57d060e6..268655b2 100644 > +--- a/interpret.h > ++++ b/interpret.h > +@@ -238,6 +238,7 @@ uninitialized_scalar: > + _("reference to uninitialized argument `%s'") : > + _("reference to uninitialized variable `%s'"), > + save_symbol->vname); > ++ UPREF(m); > + PUSH(m); > + break; > + > +diff --git a/test/ChangeLog b/test/ChangeLog > +index a73637bf..ea08edee 100644 > +--- a/test/ChangeLog > ++++ b/test/ChangeLog > +@@ -1,3 +1,8 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. > ++ * elemnew1.awk, elemnew1.ok: New files. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/test/Makefile.am b/test/Makefile.am > +index ab06974c..8a5c3c49 100644 > +--- a/test/Makefile.am > ++++ b/test/Makefile.am > +@@ -282,6 +282,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +diff --git a/test/Makefile.in b/test/Makefile.in > +index 834feb09..a4fb1cc1 100644 > +--- a/test/Makefile.in > ++++ b/test/Makefile.in > +@@ -550,6 +550,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +@@ -4476,6 +4478,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/Maketests b/test/Maketests > +index 3a667af8..90828e7f 100644 > +--- a/test/Maketests > ++++ b/test/Maketests > +@@ -1432,6 +1432,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/elemnew1.awk b/test/elemnew1.awk > +new file mode 100644 > +index 00000000..58dc9fcd > +--- /dev/null > ++++ b/test/elemnew1.awk > +@@ -0,0 +1,9 @@ > ++function add_flags(old) { > ++ if (old) > ++ return 0 > ++ if (!old) > ++ return 1 > ++} > ++BEGIN { > ++ a[0]=add_flags(a[0]) > ++} > +diff --git a/test/elemnew1.ok b/test/elemnew1.ok > +new file mode 100644 > +index 00000000..e69de29b > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 08:17:35 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 09:17:35 +0100 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir In-Reply-To: <20221031010904.1109541-1-james.hilliard1@gmail.com> References: <20221031010904.1109541-1-james.hilliard1@gmail.com> Message-ID: <20221031081735.GK1058960@scaer> James, All, +Daniel On 2022-10-30 19:09 -0600, James Hilliard spake thusly: > In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build > dependency, as such we also need to set --with-dbus-busdir which would > otherwise be pulled via pkg-config. > > Fixes: > checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required I was surprised that I did not have this error locally, but it only happens when systemd is enabled. So, rather than hard-code the path, I think I would prefer we add back a buid dependency on dbus when systemd is enabled: diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..6e366e094d 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -31,7 +31,8 @@ endif ifeq ($(BR2_PACKAGE_SYSTEMD),y) IWD_CONF_OPTS += --enable-systemd-service -IWD_DEPENDENCIES += systemd +# Need dbus for system_bus_services_dir variable provided by dbus' .pc +IWD_DEPENDENCIES += dbus systemd else IWD_CONF_OPTS += --disable-systemd-service endif Regards, Yann E. MORIN. > Signed-off-by: James Hilliard > --- > package/iwd/iwd.mk | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 002988cf33..e53ae595d7 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ > --disable-manual-pages \ > --enable-external-ell \ > --enable-dbus-policy \ > - --with-dbus-datadir=/usr/share > + --with-dbus-datadir=/usr/share \ > + --with-dbus-busdir=/usr/share/dbus-1/system-services > IWD_DEPENDENCIES = ell > > ifeq ($(BR2_PACKAGE_READLINE),y) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From ende.tan at starfivetech.com Mon Oct 31 08:28:41 2022 From: ende.tan at starfivetech.com (Tan En De) Date: Mon, 31 Oct 2022 16:28:41 +0800 Subject: [Buildroot] [1/1] DEVELOPERS: add myself for package/libkcapi Message-ID: <20221031082841.2781656-1-ende.tan@starfivetech.com> Add myself to help maintaining package/libkcapi. Signed-off-by: Tan En De --- As mentioned in the reply: https://lore.kernel.org/all/20221030114529.607f4e73 at windsurf/ Notice that I'm using ende.tan at starfivetech.com instead of ende.tan at linux.starfivetech.com because my company has changed SMTP server (the latter is still accessible). --- DEVELOPERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c4d23cd293..90c28b375e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2775,6 +2775,9 @@ F: package/most/ N: TIAN Yuanhao F: package/open-isns/ +N: Tan En De +F: package/libkcapi/ + N: Theo Debrouwere F: board/beagleboardx15/ F: configs/beagleboardx15_defconfig -- 2.34.1 From yann.morin.1998 at free.fr Mon Oct 31 09:06:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:06:17 +0100 Subject: [Buildroot] [git commit] support/download/cargo-post-process: cargo output for vendor config Message-ID: <20221031090735.6164E87735@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=04154a6517294dbe11a8fd653557b429a6704466 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use the output of `cargo vendor` to generate the vendor configuration. Fixes the need to patch the generated configuration if there are non-crates.io dependencies. Note: `cargo vendor` currently prints a newline before it prints the needed configuration. This is fixed in +nightly, will end up in +stable soon and must be considered when updating cargo. See: https://github.com/rust-lang/cargo/pull/11273 Until then it is needed to remove this first line to make sure that the contents of .cargo/config will be the same as they were generated with the earlier version of the script. Thus, the hashes of the packages that use this script remain the same. Signed-off-by: Simon Richter [yann.morin.1998 at free.fr: add comment in rust-bin.mk and rust.mk] Signed-off-by: Yann E. MORIN --- package/rust-bin/rust-bin.mk | 2 ++ package/rust/rust.mk | 2 ++ support/download/cargo-post-process | 26 +++++++++++++++++++------- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/package/rust-bin/rust-bin.mk b/package/rust-bin/rust-bin.mk index 6560151d99..a356acd3dc 100644 --- a/package/rust-bin/rust-bin.mk +++ b/package/rust-bin/rust-bin.mk @@ -4,6 +4,8 @@ # ################################################################################ +# When updating this version, check whether support/download/cargo-post-process +# still generates the same archives. RUST_BIN_VERSION = 1.64.0 RUST_BIN_SITE = https://static.rust-lang.org/dist RUST_BIN_LICENSE = Apache-2.0 or MIT diff --git a/package/rust/rust.mk b/package/rust/rust.mk index 411dda21c4..4b5e5fac48 100644 --- a/package/rust/rust.mk +++ b/package/rust/rust.mk @@ -4,6 +4,8 @@ # ################################################################################ +# When updating this version, check whether support/download/cargo-post-process +# still generates the same archives. RUST_VERSION = 1.64.0 RUST_SOURCE = rustc-$(RUST_VERSION)-src.tar.xz RUST_SITE = https://static.rust-lang.org/dist diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process index a4a4718a2a..186e9eb69b 100755 --- a/support/download/cargo-post-process +++ b/support/download/cargo-post-process @@ -1,6 +1,7 @@ #!/usr/bin/env bash set -e +set -o pipefail . "${0%/*}/helpers" @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" # Do the Cargo vendoring pushd "${base_name}" > /dev/null -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR # Create the local .cargo/config with vendor info +# +# The first line of the output to stdout is empty. +# So skip it to have the file start with the vendoring +# configuration (`tail --lines=+2`). +# +# NOTE: +# There is a patch for cargo to remove the first empty line: +# See: https://github.com/rust-lang/cargo/pull/11273 +# +# The patch already landed in +nightly and will end up +# in +stable soon. +# +# -> When updating rust/cargo, the call to `tail` must be removed. +# mkdir -p .cargo/ -cat <.cargo/config -[source.crates-io] -replace-with = "vendored-sources" +cargo vendor \ + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ + --locked VENDOR \ + | tail --lines=+2 | tee .cargo/config -[source.vendored-sources] -directory = "VENDOR" -EOF popd > /dev/null post_process_repack "$(pwd)" "${base_name}" "${output}" From yann.morin.1998 at free.fr Mon Oct 31 09:08:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:08:31 +0100 Subject: [Buildroot] [PATCH v2] support/download/cargo-post-process: cargo output for vendor config In-Reply-To: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> References: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> Message-ID: <20221031090831.GL1058960@scaer> Simon, All, On 2022-10-25 12:02 +0200, Simon Richter spake thusly: > Use the output of `cargo vendor` to generate the vendor configuration. > > Fixes the need to patch the generated configuration if there are > non-crates.io dependencies. > > Note: > `cargo vendor` currently prints a newline before it prints the > needed configuration. > > This is fixed in +nightly, will end up in +stable soon and must > be considered when updating cargo. > See: https://github.com/rust-lang/cargo/pull/11273 This is going to need care when we bump, so I added a little comment in rust-bin.mk and rust.mk tocheck that a version bump still generates the same archives. > Until then it is needed to remove this first line to make sure > that the contents of .cargo/config will be the same as they were > generated with the earlier version of the script. Thus, the > hashes of the packages that use this script remain the same. > > Signed-off-by: Simon Richter Applied to master, thanks. Regards, Yann E. MORIN. > --- > support/download/cargo-post-process | 26 +++++++++++++++++++------- > 1 file changed, 19 insertions(+), 7 deletions(-) > > diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process > index a4a4718a2a..186e9eb69b 100755 > --- a/support/download/cargo-post-process > +++ b/support/download/cargo-post-process > @@ -1,6 +1,7 @@ > #!/usr/bin/env bash > > set -e > +set -o pipefail > > . "${0%/*}/helpers" > > @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" > > # Do the Cargo vendoring > pushd "${base_name}" > /dev/null > -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > > # Create the local .cargo/config with vendor info > +# > +# The first line of the output to stdout is empty. > +# So skip it to have the file start with the vendoring > +# configuration (`tail --lines=+2`). > +# > +# NOTE: > +# There is a patch for cargo to remove the first empty line: > +# See: https://github.com/rust-lang/cargo/pull/11273 > +# > +# The patch already landed in +nightly and will end up > +# in +stable soon. > +# > +# -> When updating rust/cargo, the call to `tail` must be removed. > +# > mkdir -p .cargo/ > -cat <.cargo/config > -[source.crates-io] > -replace-with = "vendored-sources" > +cargo vendor \ > + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > + --locked VENDOR \ > + | tail --lines=+2 | tee .cargo/config > > -[source.vendored-sources] > -directory = "VENDOR" > -EOF > popd > /dev/null > > post_process_repack "$(pwd)" "${base_name}" "${output}" > -- > 2.38.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:21:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:21:51 +0100 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git In-Reply-To: (Waldemar Brodkorb's message of "Sun, 2 Oct 2022 13:59:59 +0200") References: Message-ID: <87k04guz4g.fsf@dell.be.48ers.dk> >>>>> "Waldemar" == Waldemar Brodkorb writes: > Fixes a musl autobuild compile error, see > http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ > Signed-off-by: Waldemar Brodkorb Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 31 09:22:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:47 +0100 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:53 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <87fsf4uz2w.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb > Signed-off-by: Bernd Kuhls Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 31 09:22:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:16 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/hdparm: Fix sha256 tarball hash Message-ID: <20221031092328.396DA87751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cc9bc36a7104b2a284d2f86dd3ffcc5beb317b40 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard (cherry picked from commit 25f45d54aa0936bac685cb96bf81165d461284f3) Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Mon Oct 31 09:21:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:21:25 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/uclibc-ng-test: update to latest git Message-ID: <20221031092328.301588774F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d187a8c2e9fe7f95833669e2a784409bf296cf0d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard (cherry picked from commit 616347a163a940f78300d980353e831a39095f3c) Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index ea5f224219..ba380ddedf 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Mon Oct 31 09:22:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:35 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/hdparm: Fix sha256 tarball hash Message-ID: <20221031092441.64FD087751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b43704ad9869d98b57ae5883044f08951d9d1f53 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard (cherry picked from commit 25f45d54aa0936bac685cb96bf81165d461284f3) Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Mon Oct 31 09:20:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:20:59 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/uclibc-ng-test: update to latest git Message-ID: <20221031092441.5AD5D8371C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d0f071e3731b4c94f8c2c7d190e9eac101ed0e07 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard (cherry picked from commit 616347a163a940f78300d980353e831a39095f3c) Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Mon Oct 31 09:30:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:30:02 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221031093031.88EF78776E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e2a9134bc76cadf5353c9f702ca813a2026823a7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Peter Korsgaard (cherry picked from commit 716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6) {Peter: drop 6.0.x bump] Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 12 ++++++------ package/linux-headers/Config.in.host | 12 ++++++------ 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index 4be34dd7eb..733f57c4a4 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "5.15.67" if BR2_LINUX_KERNEL_LATEST_VERSION + default "5.15.73" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 4d87543bbb..ec28403f36 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,13 +1,13 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 d8060dc88f862baaae66b42a2dbc12298ed667c698eb5c55617a7786ee47bf25 linux-5.16.20.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc sha256 35017bb40b604e0b577fc2b87e727632b46608a2ba3a4f5858b9177f58f376b3 linux-4.4.302.tar.xz -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index c256e3bca1..dc5eeeb38b 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -382,12 +382,12 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string default "4.4.302" if BR2_KERNEL_HEADERS_4_4 - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 default "5.16.20" if BR2_KERNEL_HEADERS_5_16 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL From peter at korsgaard.com Mon Oct 31 09:26:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:26:36 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221031093045.821FC8776E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=219b4a626c39dd7c08f314f9df9cafa9f3054b05 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: Peter Korsgaard (cherry picked from commit 716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6) [Peter: drop 6.0.x bump] Signed-off-by: Peter Korsgaard --- linux/linux.hash | 12 ++++++------ package/linux-headers/Config.in.host | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index a1b7984489..68cf42bbbf 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,12 +1,12 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index ab59bdd368..3ec26f532d 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -376,12 +376,12 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL From yann.morin.1998 at free.fr Mon Oct 31 09:46:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:46:13 +0100 Subject: [Buildroot] [git commit] DEVELOPERS: add myself for package/libkcapi Message-ID: <20221031094635.DDA778777A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68df37aeb47671bc5931d5539e1f5bc04777fab9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add myself to help maintaining package/libkcapi. Signed-off-by: Tan En De Signed-off-by: Yann E. MORIN --- DEVELOPERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1380ae6a98..82776cc14d 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2784,6 +2784,9 @@ F: package/most/ N: TIAN Yuanhao F: package/open-isns/ +N: Tan En De +F: package/libkcapi/ + N: Theo Debrouwere F: board/beagleboardx15/ F: configs/beagleboardx15_defconfig From yann.morin.1998 at free.fr Mon Oct 31 09:48:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:48:55 +0100 Subject: [Buildroot] [1/1] DEVELOPERS: add myself for package/libkcapi In-Reply-To: <20221031082841.2781656-1-ende.tan@starfivetech.com> References: <20221031082841.2781656-1-ende.tan@starfivetech.com> Message-ID: <20221031094855.GM1058960@scaer> Tan, All, On 2022-10-31 16:28 +0800, Tan En De spake thusly: > Add myself to help maintaining package/libkcapi. > > Signed-off-by: Tan En De Applied to master, thanks. Regards, Yann E. MORIN. > --- > As mentioned in the reply: > https://lore.kernel.org/all/20221030114529.607f4e73 at windsurf/ > Notice that I'm using ende.tan at starfivetech.com instead of > ende.tan at linux.starfivetech.com because my company has changed SMTP > server (the latter is still accessible). > --- > DEVELOPERS | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/DEVELOPERS b/DEVELOPERS > index c4d23cd293..90c28b375e 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2775,6 +2775,9 @@ F: package/most/ > N: TIAN Yuanhao > F: package/open-isns/ > > +N: Tan En De > +F: package/libkcapi/ > + > N: Theo Debrouwere > F: board/beagleboardx15/ > F: configs/beagleboardx15_defconfig > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:50:36 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:36 +0100 Subject: [Buildroot] [git commit] package/intel-mediasdk: bump version to 22.6.0 Message-ID: <20221031095715.C010287864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c46ba02f29593247538a2c4d7e827662e2e93864 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index 25894aea63..da4286ae23 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz +sha256 21a54b752c6b84f032b53a3e328d29f05a448b39f4c18f75fe4e79bb219dc40e intel-mediasdk-22.6.0.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index 4080188dc5..30fddfbcfd 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.4 +INTEL_MEDIASDK_VERSION = 22.6.0 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:41 +0100 Subject: [Buildroot] [git commit] package/motion: bump to version 4.5.0 Message-ID: <20221031095715.D767787844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27a4b1a967b1efbb8339aa198ac242063fd641e5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/motion/motion.hash | 2 +- package/motion/motion.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/motion/motion.hash b/package/motion/motion.hash index 085ac90449..9b99256864 100644 --- a/package/motion/motion.hash +++ b/package/motion/motion.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/motion/motion.mk b/package/motion/motion.mk index 5d54ecea01..18fe0eb630 100644 --- a/package/motion/motion.mk +++ b/package/motion/motion.mk @@ -4,7 +4,7 @@ # ################################################################################ -MOTION_VERSION = 4.4.0 +MOTION_VERSION = 4.5.0 MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) MOTION_LICENSE = GPL-2.0 MOTION_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:34 +0100 Subject: [Buildroot] [git commit] package/intel-mediadriver: bump version to 22.6.0 Message-ID: <20221031095715.B55CA87847@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d30de3f1e17bcd25509b48f6e4aa0be69de8bd19 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 35e4c97c7c..d1698cbfb5 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index d0c1213965..d1a9ca7789 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.4 +INTEL_MEDIADRIVER_VERSION = 22.6.0 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause From yann.morin.1998 at free.fr Mon Oct 31 09:50:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:32 +0100 Subject: [Buildroot] [git commit] package/flac: bump version to 1.4.2 Message-ID: <20221031095715.A98E987844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5a172ef532b6e27eab501af6ae82b26ab912e48a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://xiph.org/flac/changelog.html Switched _SITE to https and update project URL. Upstream removed the dependency to host-nasm: https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/flac/Config.in | 2 +- package/flac/flac.hash | 4 ++-- package/flac/flac.mk | 11 ++--------- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/package/flac/Config.in b/package/flac/Config.in index 267acb7f34..62aca290fe 100644 --- a/package/flac/Config.in +++ b/package/flac/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC help FLAC is an Open Source lossless audio codec. - http://flac.sourceforge.net/ + https://xiph.org/flac/ comment "flac needs a toolchain w/ wchar" depends on !BR2_USE_WCHAR diff --git a/package/flac/flac.hash b/package/flac/flac.hash index 1f7763fd6e..b993ebd759 100644 --- a/package/flac/flac.hash +++ b/package/flac/flac.hash @@ -1,5 +1,5 @@ -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL diff --git a/package/flac/flac.mk b/package/flac/flac.mk index 91d5840d72..ebb4778521 100644 --- a/package/flac/flac.mk +++ b/package/flac/flac.mk @@ -4,8 +4,8 @@ # ################################################################################ -FLAC_VERSION = 1.4.0 -FLAC_SITE = http://downloads.xiph.org/releases/flac +FLAC_VERSION = 1.4.2 +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz FLAC_INSTALL_STAGING = YES FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) @@ -27,11 +27,4 @@ else FLAC_CONF_OPTS += --disable-ogg endif -ifeq ($(BR2_X86_CPU_HAS_SSE),y) -FLAC_DEPENDENCIES += host-nasm -FLAC_CONF_OPTS += --enable-sse -else -FLAC_CONF_OPTS += --disable-sse -endif - $(eval $(autotools-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:45 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:45 +0100 Subject: [Buildroot] [git commit] package/arp-scan: bump to version 1.9.8 Message-ID: <20221031095715.ED47887864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fb35e5f032d714f80f058fc410f38a0361c4a3b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of COPYING (gnu.org license file used since https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/arp-scan/arp-scan.hash | 4 ++-- package/arp-scan/arp-scan.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash index dd97333013..b18c6ceb38 100644 --- a/package/arp-scan/arp-scan.hash +++ b/package/arp-scan/arp-scan.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk index 3fdbd463c2..73d1b99bc7 100644 --- a/package/arp-scan/arp-scan.mk +++ b/package/arp-scan/arp-scan.mk @@ -4,7 +4,7 @@ # ################################################################################ -ARP_SCAN_VERSION = 1.9.7 +ARP_SCAN_VERSION = 1.9.8 ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) ARP_SCAN_LICENSE = GPL-3.0+ ARP_SCAN_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Mon Oct 31 09:50:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:50 +0100 Subject: [Buildroot] [git commit] package/exfatprogs: drop host-pkgconf dependency Message-ID: <20221031095716.0EE2287844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=11ff62234ab139296ead705869c44c0a233682da branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master host-pkgconf is not a dependency since bump to version 1.0.3 in commit fbad745139125ea0995a436fd81ce7ea233638c0 and https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/exfatprogs/exfatprogs.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 2911d21f4f..44679c7d60 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ EXFATPROGS_LICENSE_FILES = COPYING -EXFATPROGS_DEPENDENCIES = host-pkgconf -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf $(eval $(autotools-package)) $(eval $(host-autotools-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:38 +0100 Subject: [Buildroot] [git commit] package/python-pillow: bump to version 9.3.0 Message-ID: <20221031095715.CB4BC87865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e919528e64c6a8a08c47b83653b0d6f2e8f8437e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-pillow/python-pillow.hash | 4 ++-- package/python-pillow/python-pillow.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash index 0e407bd55c..46da25dddc 100644 --- a/package/python-pillow/python-pillow.hash +++ b/package/python-pillow/python-pillow.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pillow/json -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz # Locally computed sha256 checksums sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk index 31725a3e46..5ea9fcf264 100644 --- a/package/python-pillow/python-pillow.mk +++ b/package/python-pillow/python-pillow.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_PILLOW_VERSION = 9.2.0 -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed +PYTHON_PILLOW_VERSION = 9.3.0 +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz PYTHON_PILLOW_LICENSE = HPND PYTHON_PILLOW_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:57 +0100 Subject: [Buildroot] [git commit] package/igmpproxy: bump to version 0.4 Message-ID: <20221031095716.2FF4687844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fbaaab0fb5851b029ca461eb387ff6c48f6c49cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/pali/igmpproxy/releases/tag/0.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/igmpproxy/igmpproxy.hash | 2 +- package/igmpproxy/igmpproxy.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash index 238de67e88..a7e1a065d9 100644 --- a/package/igmpproxy/igmpproxy.hash +++ b/package/igmpproxy/igmpproxy.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk index 6a6b56afa0..357c9087e0 100644 --- a/package/igmpproxy/igmpproxy.mk +++ b/package/igmpproxy/igmpproxy.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGMPPROXY_VERSION = 0.3 +IGMPPROXY_VERSION = 0.4 IGMPPROXY_SITE = \ https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) IGMPPROXY_AUTORECONF = YES From yann.morin.1998 at free.fr Mon Oct 31 09:50:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:43 +0100 Subject: [Buildroot] [git commit] package/exim: fix typo in comment Message-ID: <20221031095715.E2DE687847@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=55ef42e090b39fdf129b7e5e218019e0156fe166 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/exim/exim.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/exim/exim.mk b/package/exim/exim.mk index e0fcd83fb0..9c54eeec44 100644 --- a/package/exim/exim.mk +++ b/package/exim/exim.mk @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value $(@D)/Local/Makefile endef -# Comment-out a variable. Has no effect if it does not exits. +# Comment-out a variable. Has no effect if it does not exist. define exim-config-unset # variable-name $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ $(@D)/Local/Makefile From yann.morin.1998 at free.fr Mon Oct 31 09:50:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:55 +0100 Subject: [Buildroot] [git commit] package/cups-pk-helper: bump to version 0.2.7 Message-ID: <20221031095716.24DB387864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69ee6fdef440ff69ec174e69b5b0ca214f6c2ee7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to meson-package https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/cups-pk-helper/cups-pk-helper.hash | 3 ++- package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash index 18fe789389..75c5a5ffda 100644 --- a/package/cups-pk-helper/cups-pk-helper.hash +++ b/package/cups-pk-helper/cups-pk-helper.hash @@ -1,3 +1,4 @@ +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz # Locally computed: -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk index c688743160..2bd00c6912 100644 --- a/package/cups-pk-helper/cups-pk-helper.mk +++ b/package/cups-pk-helper/cups-pk-helper.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_PK_HELPER_VERSION = 0.2.6 +CUPS_PK_HELPER_VERSION = 0.2.7 CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz CUPS_PK_HELPER_LICENSE = GPL-2.0+ @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit -$(eval $(autotools-package)) +$(eval $(meson-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:52 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:52 +0100 Subject: [Buildroot] [git commit] package/exfatprogs: bump to version 1.2.0 Message-ID: <20221031095716.19D5287773@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=35a6c9cb0dc7f9f7015ecedb9761b1d63a8a587d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/exfatprogs/exfatprogs/releases/tag/1.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/exfatprogs/exfatprogs.hash | 4 ++-- package/exfatprogs/exfatprogs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/exfatprogs/exfatprogs.hash b/package/exfatprogs/exfatprogs.hash index 99f57c9deb..49135b1da7 100644 --- a/package/exfatprogs/exfatprogs.hash +++ b/package/exfatprogs/exfatprogs.hash @@ -1,5 +1,5 @@ -# From https://github.com/exfatprogs/exfatprogs/releases/download/1.1.3/exfatprogs-1.1.3.tar.xz.sha256 -sha256 3dbd74b60eec18d2c68d57be4a872d7baa4f7d848e669e31159452ef5245b809 exfatprogs-1.1.3.tar.xz +# From https://github.com/exfatprogs/exfatprogs/releases/download/1.2.0/exfatprogs-1.2.0.tar.xz.sha256 +sha256 56d9a49465deafc367d428afc71c8098705a30ee19a3cdf3c5320650b8880742 exfatprogs-1.2.0.tar.xz # Hash for license file sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 44679c7d60..d755c7a214 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXFATPROGS_VERSION = 1.1.3 +EXFATPROGS_VERSION = 1.2.0 EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ From yann.morin.1998 at free.fr Mon Oct 31 09:50:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:59 +0100 Subject: [Buildroot] [git commit] package/log4cxx: bump to version 0.13.0 Message-ID: <20221031095716.3A60687865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b8098ff155958374f6791f81479684bac711ab03 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which was merged: https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 and updated: https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...ack-only-check-for-boost-if-really-needed.patch | 36 ---------------------- package/log4cxx/log4cxx.hash | 4 +-- package/log4cxx/log4cxx.mk | 2 +- 3 files changed, 3 insertions(+), 39 deletions(-) diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch deleted file mode 100644 index 7df29ea120..0000000000 --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 28 Jan 2022 13:11:01 +0100 -Subject: [PATCH] boost-fallback: only check for boost if really needed - -- only check for boost if really needed (in case of legacy c++ standard < c++17) - -Signed-off-by: Peter Seiderer ---- - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake -index 8285b0b9..0ecf8c6c 100644 ---- a/src/cmake/boost-fallback/boost-fallback.cmake -+++ b/src/cmake/boost-fallback/boost-fallback.cmake -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") - -+# search for boost only in case needed for legacy c++ standard < c++17 -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) - find_package(Boost COMPONENTS thread) - if( ${Boost_FOUND} ) - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") - endif( ${Boost_FOUND} ) -+endif() - - # Link the target with the appropriate boost libraries(if required) - function(boostfallback_link target) --- -2.34.1 - diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash index 12633c8e57..8190f94aa3 100644 --- a/package/log4cxx/log4cxx.hash +++ b/package/log4cxx/log4cxx.hash @@ -1,4 +1,4 @@ -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz # Locally computed sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk index d20cc792a6..f50267d737 100644 --- a/package/log4cxx/log4cxx.mk +++ b/package/log4cxx/log4cxx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LOG4CXX_VERSION = 0.12.1 +LOG4CXX_VERSION = 0.13.0 LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz LOG4CXX_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Mon Oct 31 09:50:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:48 +0100 Subject: [Buildroot] [git commit] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 Message-ID: <20221031095716.04C4F87865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d136e5cc950ab3ab29ec13e430fc78291634d96 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - libuv Release notes: https://github.com/libuv/libuv/issues/3452 https://github.com/libuv/libuv/issues/3522 https://github.com/libuv/libuv/issues/3586 Updated license hash due to various commits regarding Android/Windows. - uvw: Updated license hash due to copyright year bump: https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/libuv/libuv.hash | 4 ++-- package/libuv/libuv.mk | 2 +- package/uvw/uvw.hash | 4 ++-- package/uvw/uvw.mk | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash index 1874aa344c..b0fa0ff5be 100644 --- a/package/libuv/libuv.hash +++ b/package/libuv/libuv.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk index ed51fc92f9..c169b76a6a 100644 --- a/package/libuv/libuv.mk +++ b/package/libuv/libuv.mk @@ -6,7 +6,7 @@ # When bumping libuv, check if a new version of uvw is available # and bump it too. -LIBUV_VERSION = 1.43.0 +LIBUV_VERSION = 1.44.2 LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) LIBUV_DEPENDENCIES = host-pkgconf LIBUV_INSTALL_STAGING = YES diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash index 564c0980f3..a0c74bbe05 100644 --- a/package/uvw/uvw.hash +++ b/package/uvw/uvw.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk index 161c40849d..b6c2135d6f 100644 --- a/package/uvw/uvw.mk +++ b/package/uvw/uvw.mk @@ -4,7 +4,7 @@ # ################################################################################ -UVW_VERSION = 2.11.0_libuv_v1.43 +UVW_VERSION = 2.12.1_libuv_v1.44 UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) UVW_INSTALL_STAGING = YES UVW_INSTALL_TARGET = NO From yann.morin.1998 at free.fr Mon Oct 31 09:57:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:57:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/msmtp: security bump to version 1.8.22 In-Reply-To: <20221030224328.684577-1-fontaine.fabrice@gmail.com> References: <20221030224328.684577-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095758.GN1058960@scaer> Fabrice, All, On 2022-10-30 23:43 +0100, Fabrice Fontaine spake thusly: > - Fixed a security problem in msmtpd: mail addresses starting with '-' could be > interpreted as options of the pipe command. > > https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/msmtp/msmtp.hash | 4 ++-- > package/msmtp/msmtp.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash > index 1e73d92470..c5571f2fb3 100644 > --- a/package/msmtp/msmtp.hash > +++ b/package/msmtp/msmtp.hash > @@ -1,7 +1,7 @@ > # Locally calculated after checking signature > -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig > +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig > # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 > -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz > +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz > > # Hash for license file: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING > diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk > index 3db36f4cd0..c3928ffcbb 100644 > --- a/package/msmtp/msmtp.mk > +++ b/package/msmtp/msmtp.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MSMTP_VERSION = 1.8.14 > +MSMTP_VERSION = 1.8.22 > MSMTP_SITE = https://marlam.de/msmtp/releases > MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz > MSMTP_DEPENDENCIES = host-pkgconf > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:58:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:15 +0100 Subject: [Buildroot] [PATCH 1/1] package/log4cxx: bump to version 0.13.0 In-Reply-To: <20221030223440.678755-1-fontaine.fabrice@gmail.com> References: <20221030223440.678755-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095815.GO1058960@scaer> Fabrice, All, On 2022-10-30 23:34 +0100, Fabrice Fontaine spake thusly: > Drop patch which was merged: > https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 > and updated: > https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba > > https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...nly-check-for-boost-if-really-needed.patch | 36 ------------------- > package/log4cxx/log4cxx.hash | 4 +-- > package/log4cxx/log4cxx.mk | 2 +- > 3 files changed, 3 insertions(+), 39 deletions(-) > delete mode 100644 package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > > diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > deleted file mode 100644 > index 7df29ea120..0000000000 > --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > +++ /dev/null > @@ -1,36 +0,0 @@ > -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 > -From: Peter Seiderer > -Date: Fri, 28 Jan 2022 13:11:01 +0100 > -Subject: [PATCH] boost-fallback: only check for boost if really needed > - > -- only check for boost if really needed (in case of legacy c++ standard < c++17) > - > -Signed-off-by: Peter Seiderer > ---- > - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ > - 1 file changed, 3 insertions(+) > - > -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake > -index 8285b0b9..0ecf8c6c 100644 > ---- a/src/cmake/boost-fallback/boost-fallback.cmake > -+++ b/src/cmake/boost-fallback/boost-fallback.cmake > -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes > - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") > - > -+# search for boost only in case needed for legacy c++ standard < c++17 > -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) > - find_package(Boost COMPONENTS thread) > - if( ${Boost_FOUND} ) > - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) > - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") > - endif( ${Boost_FOUND} ) > -+endif() > - > - # Link the target with the appropriate boost libraries(if required) > - function(boostfallback_link target) > --- > -2.34.1 > - > diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash > index 12633c8e57..8190f94aa3 100644 > --- a/package/log4cxx/log4cxx.hash > +++ b/package/log4cxx/log4cxx.hash > @@ -1,4 +1,4 @@ > -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 > -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz > +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 > +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz > # Locally computed > sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE > diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk > index d20cc792a6..f50267d737 100644 > --- a/package/log4cxx/log4cxx.mk > +++ b/package/log4cxx/log4cxx.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LOG4CXX_VERSION = 0.12.1 > +LOG4CXX_VERSION = 0.13.0 > LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) > LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz > LOG4CXX_INSTALL_STAGING = YES > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:58:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/igmpproxy: bump to version 0.4 In-Reply-To: <20221030221121.474743-1-fontaine.fabrice@gmail.com> References: <20221030221121.474743-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095832.GP1058960@scaer> Fabrice, All, On 2022-10-30 23:11 +0100, Fabrice Fontaine spake thusly: > https://github.com/pali/igmpproxy/releases/tag/0.4 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/igmpproxy/igmpproxy.hash | 2 +- > package/igmpproxy/igmpproxy.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash > index 238de67e88..a7e1a065d9 100644 > --- a/package/igmpproxy/igmpproxy.hash > +++ b/package/igmpproxy/igmpproxy.hash > @@ -1,5 +1,5 @@ > # Locally computed: > -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz > +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz > sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING > sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt > sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt > diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk > index 6a6b56afa0..357c9087e0 100644 > --- a/package/igmpproxy/igmpproxy.mk > +++ b/package/igmpproxy/igmpproxy.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -IGMPPROXY_VERSION = 0.3 > +IGMPPROXY_VERSION = 0.4 > IGMPPROXY_SITE = \ > https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) > IGMPPROXY_AUTORECONF = YES > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:57:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:57:23 +0100 Subject: [Buildroot] [git commit] package/msmtp: security bump to version 1.8.22 Message-ID: <20221031095851.3031F8786B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9a294be424a4f78e1a54e3df7a706181fa287793 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fixed a security problem in msmtpd: mail addresses starting with '-' could be interpreted as options of the pipe command. https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/msmtp/msmtp.hash | 4 ++-- package/msmtp/msmtp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash index 1e73d92470..c5571f2fb3 100644 --- a/package/msmtp/msmtp.hash +++ b/package/msmtp/msmtp.hash @@ -1,7 +1,7 @@ # Locally calculated after checking signature -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz # Hash for license file: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk index 3db36f4cd0..c3928ffcbb 100644 --- a/package/msmtp/msmtp.mk +++ b/package/msmtp/msmtp.mk @@ -4,7 +4,7 @@ # ################################################################################ -MSMTP_VERSION = 1.8.14 +MSMTP_VERSION = 1.8.22 MSMTP_SITE = https://marlam.de/msmtp/releases MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz MSMTP_DEPENDENCIES = host-pkgconf From yann.morin.1998 at free.fr Mon Oct 31 09:58:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/cups-pk-helper: bump to version 0.2.7 In-Reply-To: <20221030215201.463000-1-fontaine.fabrice@gmail.com> References: <20221030215201.463000-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095848.GQ1058960@scaer> Fabrice, All, On 2022-10-30 22:52 +0100, Fabrice Fontaine spake thusly: > Switch to meson-package > > https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/cups-pk-helper/cups-pk-helper.hash | 3 ++- > package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- > 2 files changed, 4 insertions(+), 3 deletions(-) > > diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash > index 18fe789389..75c5a5ffda 100644 > --- a/package/cups-pk-helper/cups-pk-helper.hash > +++ b/package/cups-pk-helper/cups-pk-helper.hash > @@ -1,3 +1,4 @@ > +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum > +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz > # Locally computed: > -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk > index c688743160..2bd00c6912 100644 > --- a/package/cups-pk-helper/cups-pk-helper.mk > +++ b/package/cups-pk-helper/cups-pk-helper.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -CUPS_PK_HELPER_VERSION = 0.2.6 > +CUPS_PK_HELPER_VERSION = 0.2.7 > CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases > CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz > CUPS_PK_HELPER_LICENSE = GPL-2.0+ > @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING > CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project > CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit > > -$(eval $(autotools-package)) > +$(eval $(meson-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 In-Reply-To: <20221015223439.202348-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:34:39 +0200") References: <20221015223439.202348-1-fontaine.fabrice@gmail.com> Message-ID: <87bkpsuxem.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles > - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE > - Fix overflow check in SAX2.c > https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From yann.morin.1998 at free.fr Mon Oct 31 09:59:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:59:14 +0100 Subject: [Buildroot] [PATCH 1/2] package/exfatprogs: drop host-pkgconf dependency In-Reply-To: <20221030215046.461380-1-fontaine.fabrice@gmail.com> References: <20221030215046.461380-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095914.GR1058960@scaer> Fabrice, All, On 2022-10-30 22:50 +0100, Fabrice Fontaine spake thusly: > host-pkgconf is not a dependency since bump to version 1.0.3 in commit > fbad745139125ea0995a436fd81ce7ea233638c0 and > https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced > > Signed-off-by: Fabrice Fontaine Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/exfatprogs/exfatprogs.mk | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk > index 2911d21f4f..44679c7d60 100644 > --- a/package/exfatprogs/exfatprogs.mk > +++ b/package/exfatprogs/exfatprogs.mk > @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz > EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) > EXFATPROGS_LICENSE = GPL-2.0+ > EXFATPROGS_LICENSE_FILES = COPYING > -EXFATPROGS_DEPENDENCIES = host-pkgconf > -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf > > $(eval $(autotools-package)) > $(eval $(host-autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:59:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:59:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 In-Reply-To: <20221030213743.943645-1-bernd.kuhls@t-online.de> References: <20221030213743.943645-1-bernd.kuhls@t-online.de> Message-ID: <20221031095931.GS1058960@scaer> Bernd, All, On 2022-10-30 22:37 +0100, Bernd Kuhls spake thusly: > - libuv > Release notes: > https://github.com/libuv/libuv/issues/3452 > https://github.com/libuv/libuv/issues/3522 > https://github.com/libuv/libuv/issues/3586 > > Updated license hash due to various commits regarding Android/Windows. > > - uvw: > Updated license hash due to copyright year bump: > https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libuv/libuv.hash | 4 ++-- > package/libuv/libuv.mk | 2 +- > package/uvw/uvw.hash | 4 ++-- > package/uvw/uvw.mk | 2 +- > 4 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash > index 1874aa344c..b0fa0ff5be 100644 > --- a/package/libuv/libuv.hash > +++ b/package/libuv/libuv.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz > -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE > +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz > +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE > diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk > index ed51fc92f9..c169b76a6a 100644 > --- a/package/libuv/libuv.mk > +++ b/package/libuv/libuv.mk > @@ -6,7 +6,7 @@ > > # When bumping libuv, check if a new version of uvw is available > # and bump it too. > -LIBUV_VERSION = 1.43.0 > +LIBUV_VERSION = 1.44.2 > LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) > LIBUV_DEPENDENCIES = host-pkgconf > LIBUV_INSTALL_STAGING = YES > diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash > index 564c0980f3..a0c74bbe05 100644 > --- a/package/uvw/uvw.hash > +++ b/package/uvw/uvw.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz > -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE > +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz > +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE > diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk > index 161c40849d..b6c2135d6f 100644 > --- a/package/uvw/uvw.mk > +++ b/package/uvw/uvw.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -UVW_VERSION = 2.11.0_libuv_v1.43 > +UVW_VERSION = 2.12.1_libuv_v1.44 > UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) > UVW_INSTALL_STAGING = YES > UVW_INSTALL_TARGET = NO > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:00:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/arp-scan: bump to version 1.9.8 In-Reply-To: <20221030213517.95390-1-fontaine.fabrice@gmail.com> References: <20221030213517.95390-1-fontaine.fabrice@gmail.com> Message-ID: <20221031100007.GT1058960@scaer> Fabrice, All, On 2022-10-30 22:35 +0100, Fabrice Fontaine spake thusly: > Update hash of COPYING (gnu.org license file used since > https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) > > https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/arp-scan/arp-scan.hash | 4 ++-- > package/arp-scan/arp-scan.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash > index dd97333013..b18c6ceb38 100644 > --- a/package/arp-scan/arp-scan.hash > +++ b/package/arp-scan/arp-scan.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING > +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz > +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING > diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk > index 3fdbd463c2..73d1b99bc7 100644 > --- a/package/arp-scan/arp-scan.mk > +++ b/package/arp-scan/arp-scan.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -ARP_SCAN_VERSION = 1.9.7 > +ARP_SCAN_VERSION = 1.9.8 > ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) > ARP_SCAN_LICENSE = GPL-3.0+ > ARP_SCAN_LICENSE_FILES = COPYING > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:00:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:26 +0100 Subject: [Buildroot] [PATCH 1/1] package/exim: fix typo in comment In-Reply-To: <20221030212529.364240-1-bernd.kuhls@t-online.de> References: <20221030212529.364240-1-bernd.kuhls@t-online.de> Message-ID: <20221031100026.GU1058960@scaer> Bernd, All, On 2022-10-30 22:25 +0100, Bernd Kuhls spake thusly: > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/exim/exim.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/exim/exim.mk b/package/exim/exim.mk > index e0fcd83fb0..9c54eeec44 100644 > --- a/package/exim/exim.mk > +++ b/package/exim/exim.mk > @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value > $(@D)/Local/Makefile > endef > > -# Comment-out a variable. Has no effect if it does not exits. > +# Comment-out a variable. Has no effect if it does not exist. > define exim-config-unset # variable-name > $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ > $(@D)/Local/Makefile > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:27 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/libxml2: security bump to version 2.10.3 Message-ID: <20221031100044.873EC87876@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=15d1284266ee35ecbb5f98a807ba18abe2e38d7d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit df77618b12bfd442e5efd39abd013c3ba88481b8) Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From yann.morin.1998 at free.fr Mon Oct 31 10:00:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:41 +0100 Subject: [Buildroot] [PATCH 1/1] package/motion: bump to version 4.5.0 In-Reply-To: <20221030212519.66340-1-fontaine.fabrice@gmail.com> References: <20221030212519.66340-1-fontaine.fabrice@gmail.com> Message-ID: <20221031100041.GV1058960@scaer> Fabrice, All, On 2022-10-30 22:25 +0100, Fabrice Fontaine spake thusly: > https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/motion/motion.hash | 2 +- > package/motion/motion.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/motion/motion.hash b/package/motion/motion.hash > index 085ac90449..9b99256864 100644 > --- a/package/motion/motion.hash > +++ b/package/motion/motion.hash > @@ -1,3 +1,3 @@ > # Locally computed: > -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz > +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE > diff --git a/package/motion/motion.mk b/package/motion/motion.mk > index 5d54ecea01..18fe0eb630 100644 > --- a/package/motion/motion.mk > +++ b/package/motion/motion.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MOTION_VERSION = 4.4.0 > +MOTION_VERSION = 4.5.0 > MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) > MOTION_LICENSE = GPL-2.0 > MOTION_LICENSE_FILES = LICENSE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:15 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/libxml2: security bump to version 2.10.3 Message-ID: <20221031100111.6260887876@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6bcca6d010250154fe44e3f546107255f329fa19 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit df77618b12bfd442e5efd39abd013c3ba88481b8) Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From yann.morin.1998 at free.fr Mon Oct 31 10:01:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:01:22 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pillow: bump to version 9.3.0 In-Reply-To: <20221030195404.1221968-1-james.hilliard1@gmail.com> References: <20221030195404.1221968-1-james.hilliard1@gmail.com> Message-ID: <20221031100122.GW1058960@scaer> James, All, On 2022-10-30 13:54 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/python-pillow/python-pillow.hash | 4 ++-- > package/python-pillow/python-pillow.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash > index 0e407bd55c..46da25dddc 100644 > --- a/package/python-pillow/python-pillow.hash > +++ b/package/python-pillow/python-pillow.hash > @@ -1,6 +1,6 @@ > # md5, sha256 from https://pypi.org/pypi/pillow/json > -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz > -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz > +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz > +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz > > # Locally computed sha256 checksums > sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE > diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk > index 31725a3e46..5ea9fcf264 100644 > --- a/package/python-pillow/python-pillow.mk > +++ b/package/python-pillow/python-pillow.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -PYTHON_PILLOW_VERSION = 9.2.0 > -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed > +PYTHON_PILLOW_VERSION = 9.3.0 > +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a > PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz > PYTHON_PILLOW_LICENSE = HPND > PYTHON_PILLOW_LICENSE_FILES = LICENSE > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:01:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:01:58 +0100 Subject: [Buildroot] [PATCH 1/2] package/intel-mediadriver: bump version to 22.6.0 In-Reply-To: <20221030194519.1208612-1-bernd.kuhls@t-online.de> References: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Message-ID: <20221031100158.GX1058960@scaer> Bernd, All, On 2022-10-30 20:45 +0100, Bernd Kuhls spake thusly: > Signed-off-by: Bernd Kuhls Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/intel-mediadriver/intel-mediadriver.hash | 2 +- > package/intel-mediadriver/intel-mediadriver.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash > index 35e4c97c7c..d1698cbfb5 100644 > --- a/package/intel-mediadriver/intel-mediadriver.hash > +++ b/package/intel-mediadriver/intel-mediadriver.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz > +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz > sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md > diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk > index c2d480fa21..821c0920f4 100644 > --- a/package/intel-mediadriver/intel-mediadriver.mk > +++ b/package/intel-mediadriver/intel-mediadriver.mk > @@ -6,7 +6,7 @@ > > # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack > > -INTEL_MEDIADRIVER_VERSION = 22.5.4 > +INTEL_MEDIADRIVER_VERSION = 22.6.0 > INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive > INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz > INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:02:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:02:13 +0100 Subject: [Buildroot] [PATCH 1/1] package/flac: bump version to 1.4.2 In-Reply-To: <20221030194423.1208535-1-bernd.kuhls@t-online.de> References: <20221030194423.1208535-1-bernd.kuhls@t-online.de> Message-ID: <20221031100213.GY1058960@scaer> Bernd, All, On 2022-10-30 20:44 +0100, Bernd Kuhls spake thusly: > Changelog: https://xiph.org/flac/changelog.html > > Switched _SITE to https and update project URL. > > Upstream removed the dependency to host-nasm: > https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/flac/Config.in | 2 +- > package/flac/flac.hash | 4 ++-- > package/flac/flac.mk | 11 ++--------- > 3 files changed, 5 insertions(+), 12 deletions(-) > > diff --git a/package/flac/Config.in b/package/flac/Config.in > index 267acb7f34..62aca290fe 100644 > --- a/package/flac/Config.in > +++ b/package/flac/Config.in > @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC > help > FLAC is an Open Source lossless audio codec. > > - http://flac.sourceforge.net/ > + https://xiph.org/flac/ > > comment "flac needs a toolchain w/ wchar" > depends on !BR2_USE_WCHAR > diff --git a/package/flac/flac.hash b/package/flac/flac.hash > index 1f7763fd6e..b993ebd759 100644 > --- a/package/flac/flac.hash > +++ b/package/flac/flac.hash > @@ -1,5 +1,5 @@ > -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt > -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz > +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt > +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz > # Locally computed > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL > sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL > diff --git a/package/flac/flac.mk b/package/flac/flac.mk > index 91d5840d72..ebb4778521 100644 > --- a/package/flac/flac.mk > +++ b/package/flac/flac.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -FLAC_VERSION = 1.4.0 > -FLAC_SITE = http://downloads.xiph.org/releases/flac > +FLAC_VERSION = 1.4.2 > +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac > FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz > FLAC_INSTALL_STAGING = YES > FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) > @@ -27,11 +27,4 @@ else > FLAC_CONF_OPTS += --disable-ogg > endif > > -ifeq ($(BR2_X86_CPU_HAS_SSE),y) > -FLAC_DEPENDENCIES += host-nasm > -FLAC_CONF_OPTS += --enable-sse > -else > -FLAC_CONF_OPTS += --disable-sse > -endif > - > $(eval $(autotools-package)) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 10:26:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:26:05 +0100 Subject: [Buildroot] [git commit] package/libostree: select libarchive for s390x architecture Message-ID: <20221031102627.DE38287885@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8369ff62db68ad911e8fac55881006c75af8b86e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master libarchive is needed when building for s390x. Introduced in this patch: c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case Fixes: http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ Signed-off-by: Marcus Folkesson Signed-off-by: Thomas Petazzoni --- package/libostree/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libostree/Config.in b/package/libostree/Config.in index 14ae4da4c8..696e8e1d6c 100644 --- a/package/libostree/Config.in +++ b/package/libostree/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() depends on !BR2_TOOLCHAIN_USES_MUSL select BR2_PACKAGE_E2FSPROGS + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBGPG_ERROR select BR2_PACKAGE_LIBGPGME From thomas.petazzoni at bootlin.com Mon Oct 31 10:27:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:27:33 +0100 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture In-Reply-To: <20221011062647.741292-1-marcus.folkesson@gmail.com> References: <20221011062647.741292-1-marcus.folkesson@gmail.com> Message-ID: <20221031112733.7113d46c@windsurf> Hello Marcus, On Tue, 11 Oct 2022 08:26:47 +0200 Marcus Folkesson wrote: > libarchive is needed when building for s390x. > > Introduced in this patch: > c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case > > Fixes: > http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ > > Signed-off-by: Marcus Folkesson > --- > package/libostree/Config.in | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/libostree/Config.in b/package/libostree/Config.in > index 14ae4da4c8..a36e12ddde 100644 > --- a/package/libostree/Config.in > +++ b/package/libostree/Config.in > @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE > # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() > depends on !BR2_TOOLCHAIN_USES_MUSL > select BR2_PACKAGE_E2FSPROGS > + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x Thanks for the patch! The indentation was not correct here, so I fixed that up and applied. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 10:32:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:32:31 +0100 Subject: [Buildroot] [git commit] package/catatonit: new package Message-ID: <20221031103651.1CAD287891@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e3975ec7d4b478ec6c1ba56b63cbb5bccfb9dd09 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master catatonit is a simple but valid init binary to act as PID 1 for containers. https://github.com/openSUSE/catatonit Dependency of podman. Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + ...figure.ac-call-AM_INIT_AUTOMAKE-only-once.patch | 41 ++++++++++++++++++++++ package/catatonit/Config.in | 8 +++++ package/catatonit/catatonit.hash | 3 ++ package/catatonit/catatonit.mk | 14 ++++++++ 6 files changed, 68 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 82776cc14d..5939361ba8 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -533,6 +533,7 @@ F: package/python-pylibftdi/ N: Christian Stewart F: package/batman-adv/ +F: package/catatonit/ F: package/containerd/ F: package/crun/ F: package/delve/ diff --git a/package/Config.in b/package/Config.in index 7ae354d6eb..cbdaed2279 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2531,6 +2531,7 @@ comment "Utilities" source "package/apg/Config.in" source "package/at/Config.in" source "package/bash-completion/Config.in" + source "package/catatonit/Config.in" source "package/ccrypt/Config.in" source "package/crudini/Config.in" source "package/dialog/Config.in" diff --git a/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch b/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch new file mode 100644 index 0000000000..b978a827a1 --- /dev/null +++ b/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch @@ -0,0 +1,41 @@ +From 99bb9048f532257f3a2c3856cfa19fe957ab6cec Mon Sep 17 00:00:00 2001 +From: Antonio Terceiro +Date: Thu, 4 Nov 2021 07:37:13 -0300 +Subject: [PATCH] configure.ac: call AM_INIT_AUTOMAKE only once + +That second call seems to be there since the beginning, and autoconf +2.69 was fine with it. autoconf 2.71 doesn't allow it anymore: + + $ ./autogen.sh + autoreconf: export WARNINGS= + autoreconf: Entering directory '.' + autoreconf: configure.ac: not using Gettext + autoreconf: running: aclocal --force + configure.ac:34: error: AM_INIT_AUTOMAKE expanded multiple times + /usr/share/aclocal-1.16/init.m4:29: AM_INIT_AUTOMAKE is expanded from... + configure.ac:19: the top level + /usr/share/aclocal-1.16/init.m4:29: AM_INIT_AUTOMAKE is expanded from... + configure.ac:34: the top level + autom4te: error: /usr/bin/m4 failed with exit status: 1 + aclocal: error: /usr/bin/autom4te failed with exit status: 1 + autoreconf: error: aclocal failed with exit status: 1 + +Signed-off-by: Antonio Terceiro +Upstream: https://github.com/openSUSE/catatonit/commit/99bb9048f532257f3a2c3856cfa19fe957ab6cec +Signed-off-by: Christian Stewart +--- + configure.ac | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/configure.ac b/configure.ac +index 12c9186..94c5c84 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -31,4 +31,3 @@ AC_FUNC_FORK + + AC_CONFIG_FILES([Makefile config.h]) + AC_OUTPUT +-AM_INIT_AUTOMAKE +-- +2.37.2 + diff --git a/package/catatonit/Config.in b/package/catatonit/Config.in new file mode 100644 index 0000000000..2bd3ab6717 --- /dev/null +++ b/package/catatonit/Config.in @@ -0,0 +1,8 @@ +config BR2_PACKAGE_CATATONIT + bool "catatonit" + depends on BR2_USE_MMU + help + catatonit is a simple but valid init binary to act as + PID 1 for containers. + + https://github.com/openSUSE/catatonit diff --git a/package/catatonit/catatonit.hash b/package/catatonit/catatonit.hash new file mode 100644 index 0000000000..9b7420cdb7 --- /dev/null +++ b/package/catatonit/catatonit.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 e22bc72ebc23762dad8f5d2ed9d5ab1aaad567bdd54422f1d1da775277a93296 catatonit-0.1.7.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/catatonit/catatonit.mk b/package/catatonit/catatonit.mk new file mode 100644 index 0000000000..3dd58eff1d --- /dev/null +++ b/package/catatonit/catatonit.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# catatonit +# +################################################################################ + +CATATONIT_VERSION = 0.1.7 +CATATONIT_SITE = $(call github,openSUSE,catatonit,v$(CATATONIT_VERSION)) +CATATONIT_LICENSE = GPL-3.0+ +CATATONIT_LICENSE_FILES = COPYING + +CATATONIT_AUTORECONF = YES + +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Mon Oct 31 10:37:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:37:03 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/catatonit: new package In-Reply-To: <20220821041417.483818-1-christian@paral.in> References: <20220821041417.483818-1-christian@paral.in> Message-ID: <20221031113703.1d622fc1@windsurf> On Sat, 20 Aug 2022 21:14:17 -0700 Christian Stewart via buildroot wrote: > catatonit is a simple but valid init binary to act as PID 1 for containers. > > https://github.com/openSUSE/catatonit > > Dependency of podman. > > Signed-off-by: Christian Stewart > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > ...e.ac-call-AM_INIT_AUTOMAKE-only-once.patch | 39 +++++++++++++++++++ > package/catatonit/Config.in | 7 ++++ > package/catatonit/catatonit.hash | 3 ++ > package/catatonit/catatonit.mk | 14 +++++++ > 6 files changed, 65 insertions(+) > create mode 100644 package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch > create mode 100644 package/catatonit/Config.in > create mode 100644 package/catatonit/catatonit.hash > create mode 100644 package/catatonit/catatonit.mk A dependency on BR2_USE_MMU was missing, so I've added it, and applied. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 10:38:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:38:08 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/conmon: new package In-Reply-To: References: <20220821050119.578342-1-christian@paral.in> Message-ID: <20221031113808.7d046f38@windsurf> On Sun, 18 Sep 2022 14:04:08 -0700 Christian Stewart via buildroot wrote: > This package requires a dependency on host-pkgconf and libglib2 > > I will include this in the next revision. ACK, patch marked as Changes Requested then. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From paul at crapouillou.net Mon Oct 31 10:40:14 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Mon, 31 Oct 2022 10:40:14 +0000 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build In-Reply-To: <20221030230410.982946-1-paul@crapouillou.net> References: <20221030230410.982946-1-paul@crapouillou.net> Message-ID: <2N5MKR.3RVYNROA50C41@crapouillou.net> Le dim. 30 oct. 2022 ? 23:04:10 +0000, Paul Cercueil a ?crit : > Add a patch cherry-picked from upstream to fix the build with GCC 12. > > Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. > I don't know if it fixes any autobuilder errors, I noticed the bug > when > building locally. > > Signed-off-by: Paul Cercueil > --- > ...ibmatrix-Add-missing-utility-include.patch | 29 > +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 > package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > > diff --git > a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > new file mode 100644 > index 0000000000..2a658393ae > --- /dev/null > +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > @@ -0,0 +1,29 @@ > +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 > 2001 > +From: Alexandros Frantzis > +Date: Mon, 14 Feb 2022 13:54:09 +0200 > +Subject: [PATCH] libmatrix: Add missing include > + > +Fixes compilation with GCC 12. > + > +Fixes #169 Forgot I had to sign the patch too: Signed-off-by: Paul Cercueil Cheers, -Paul > +--- > + Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a > + > + src/libmatrix/program.h | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h > +index f95b470..1c9de08 100644 > +--- a/src/libmatrix/program.h > ++++ b/src/libmatrix/program.h > +@@ -15,6 +15,7 @@ > + #include > + #include > + #include > ++#include > + #include "mat.h" > + > + // Simple shader container. Abstracts all of the OpenGL bits, but > leaves > +-- > +2.35.1 > + > -- > 2.35.1 > From thomas.petazzoni at bootlin.com Mon Oct 31 10:39:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:39:35 +0100 Subject: [Buildroot] [git commit] package/cni-plugins: new package Message-ID: <20221031104104.758008789B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d76655c86ecc8ce302490422e8d6a286857ef36c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Container Networking Interface plugins. https://github.com/containernetworking/plugins Dependency of podman. Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/cni-plugins/Config.in | 16 +++++++++++ package/cni-plugins/cni-plugins.hash | 3 +++ package/cni-plugins/cni-plugins.mk | 51 ++++++++++++++++++++++++++++++++++++ 5 files changed, 72 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 5939361ba8..64af4deb53 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -534,6 +534,7 @@ F: package/python-pylibftdi/ N: Christian Stewart F: package/batman-adv/ F: package/catatonit/ +F: package/cni-plugins/ F: package/containerd/ F: package/crun/ F: package/delve/ diff --git a/package/Config.in b/package/Config.in index cbdaed2279..450a73d4ca 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1821,6 +1821,7 @@ menu "Networking" source "package/bluez5_utils-headers/Config.in" source "package/c-ares/Config.in" source "package/cgic/Config.in" + source "package/cni-plugins/Config.in" source "package/cppzmq/Config.in" source "package/curlpp/Config.in" source "package/czmq/Config.in" diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in new file mode 100644 index 0000000000..e01cadc026 --- /dev/null +++ b/package/cni-plugins/Config.in @@ -0,0 +1,16 @@ +config BR2_PACKAGE_CNI_PLUGINS + bool "cni-plugins" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve + depends on BR2_USE_MMU + help + Container Networking Interface plugins. + + https://github.com/containernetworking/plugins + +comment "cni-plugins needs a glibc or musl toolchain w/ threads" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ + BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/cni-plugins/cni-plugins.hash b/package/cni-plugins/cni-plugins.hash new file mode 100644 index 0000000000..fc3b5a7ead --- /dev/null +++ b/package/cni-plugins/cni-plugins.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c86c44877c47f69cd23611e22029ab26b613f620195b76b3ec20f589367a7962 cni-plugins-1.1.1.tar.gz +sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE diff --git a/package/cni-plugins/cni-plugins.mk b/package/cni-plugins/cni-plugins.mk new file mode 100644 index 0000000000..b30937095a --- /dev/null +++ b/package/cni-plugins/cni-plugins.mk @@ -0,0 +1,51 @@ +################################################################################ +# +# cni-plugins +# +################################################################################ + +CNI_PLUGINS_VERSION = 1.1.1 +CNI_PLUGINS_SITE = $(call github,containernetworking,plugins,v$(CNI_PLUGINS_VERSION)) +CNI_PLUGINS_LICENSE = Apache-2.0 +CNI_PLUGINS_LICENSE_FILES = LICENSE + +CNI_PLUGINS_BUILD_TARGETS = \ + plugins/ipam/dhcp \ + plugins/main/bridge \ + plugins/main/host-device \ + plugins/main/ipvlan \ + plugins/main/loopback \ + plugins/main/macvlan \ + plugins/main/ptp \ + plugins/main/vlan \ + plugins/meta/bandwidth \ + plugins/meta/firewall \ + plugins/meta/portmap \ + plugins/meta/tuning \ + plugins/meta/vrf +CNI_PLUGINS_INSTALL_BINS = $(CNI_PLUGINS_BUILD_TARGETS) + +ifeq ($(BR2_PACKAGE_LIBAPPARMOR),y) +CNI_PLUGINS_DEPENDENCIES += libapparmor +CNI_PLUGINS_TAGS += apparmor +endif + +ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) +CNI_PLUGINS_TAGS += seccomp +CNI_PLUGINS_DEPENDENCIES += libseccomp host-pkgconf +endif + +ifeq ($(BR2_PACKAGE_LIBSELINUX),y) +CNI_PLUGINS_TAGS += selinux +CNI_PLUGINS_DEPENDENCIES += libselinux +endif + +define CNI_PLUGINS_INSTALL_TARGET_CMDS + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ + $(TARGET_DIR)/opt/cni/bin + ) +endef + +$(eval $(golang-package)) From thomas.petazzoni at bootlin.com Mon Oct 31 10:43:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:43:06 +0100 Subject: [Buildroot] [git commit] package/cni-plugins: add missing BR2_USE_MMU dependency on Config.in comment Message-ID: <20221031104347.4FD9E878A1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=23407308e51d2112b030d7b135517949f3d50c1f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The main option has a BR2_USE_MMU dependency, so the Config.in comment should have it as well. Signed-off-by: Thomas Petazzoni --- package/cni-plugins/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in index e01cadc026..25e6ff534d 100644 --- a/package/cni-plugins/Config.in +++ b/package/cni-plugins/Config.in @@ -13,4 +13,5 @@ config BR2_PACKAGE_CNI_PLUGINS comment "cni-plugins needs a glibc or musl toolchain w/ threads" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on BR2_USE_MMU depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_UCLIBC From thomas.petazzoni at bootlin.com Mon Oct 31 10:44:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:44:44 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/cni-plugins: new package In-Reply-To: <20220821053547.667311-1-christian@paral.in> References: <20220821053547.667311-1-christian@paral.in> Message-ID: <20221031114444.283e4776@windsurf> Hello Christian, On Sat, 20 Aug 2022 22:35:47 -0700 Christian Stewart via buildroot wrote: > diff --git a/DEVELOPERS b/DEVELOPERS > index d2bd0d809a..bc02190365 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -530,6 +530,7 @@ F: package/python-pylibftdi/ > N: Christian Stewart > F: package/batman-adv/ > F: package/containerd/ > +F: package/cni-plugins/ By alphabetic ordering I believe it falls before containerd, so I fixed that up. > diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in > new file mode 100644 > index 0000000000..e01cadc026 > --- /dev/null > +++ b/package/cni-plugins/Config.in > @@ -0,0 +1,16 @@ > +config BR2_PACKAGE_CNI_PLUGINS > + bool "cni-plugins" > + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS > + depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS > + depends on BR2_TOOLCHAIN_HAS_THREADS > + depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve > + depends on BR2_USE_MMU > + help > + Container Networking Interface plugins. But they are plugins for what? They don't have any dependency on anything specific. > + https://github.com/containernetworking/plugins > + > +comment "cni-plugins needs a glibc or musl toolchain w/ threads" > + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ > + BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS You forgot BR2_USE_MMU here. I forgot it as well initially, so I fixed it up as part of a follow-up commit. > +define CNI_PLUGINS_INSTALL_TARGET_CMDS > + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin > + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ > + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ > + $(TARGET_DIR)/opt/cni/bin I kept it like this, but it's fairly unusual to install stuff in /opt. Is this the normal location for these plugins? Shouldn't they go in /usr/libexec/cni/, or something like that? So overall, I applied, but there are some questions :) Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 10:46:47 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:46:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build In-Reply-To: <2N5MKR.3RVYNROA50C41@crapouillou.net> References: <20221030230410.982946-1-paul@crapouillou.net> <2N5MKR.3RVYNROA50C41@crapouillou.net> Message-ID: <20221031104647.GZ1058960@scaer> Paul, All, On 2022-10-31 10:40 +0000, Paul Cercueil spake thusly: > Le dim. 30 oct. 2022 ? 23:04:10 +0000, Paul Cercueil > a ?crit : > >Add a patch cherry-picked from upstream to fix the build with GCC 12. > > > >Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. > >I don't know if it fixes any autobuilder errors, I noticed the bug when > >building locally. > > > >Signed-off-by: Paul Cercueil > >--- > > ...ibmatrix-Add-missing-utility-include.patch | 29 +++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > create mode 100644 > >package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > > > >diff --git > >a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >new file mode 100644 > >index 0000000000..2a658393ae > >--- /dev/null > >+++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >@@ -0,0 +1,29 @@ > >+From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 > >+From: Alexandros Frantzis > >+Date: Mon, 14 Feb 2022 13:54:09 +0200 > >+Subject: [PATCH] libmatrix: Add missing include > >+ > >+Fixes compilation with GCC 12. > >+ > >+Fixes #169 > > Forgot I had to sign the patch too: > Signed-off-by: Paul Cercueil Applied to master, thanks. Regards, Yann E. MORIN. > >+--- > >+ Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a > >+ > >+ src/libmatrix/program.h | 1 + > >+ 1 file changed, 1 insertion(+) > >+ > >+diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h > >+index f95b470..1c9de08 100644 > >+--- a/src/libmatrix/program.h > >++++ b/src/libmatrix/program.h > >+@@ -15,6 +15,7 @@ > >+ #include > >+ #include > >+ #include > >++#include > >+ #include "mat.h" > >+ > >+ // Simple shader container. Abstracts all of the OpenGL bits, but > >leaves > >+-- > >+2.35.1 > >+ > >-- > >2.35.1 > > > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:46:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:46:07 +0100 Subject: [Buildroot] [git commit] package/glmark2: add patch to fix GCC 12 build Message-ID: <20221031104658.18126878A9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bacbda92e1b1bff4689ad35beeba5d136dcc6dde branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch cherry-picked from upstream to fix the build with GCC 12. Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. I don't know if it fixes any autobuilder errors, I noticed the bug when building locally. Signed-off-by: Paul Cercueil Signed-off-by: Yann E. MORIN --- ...002-libmatrix-Add-missing-utility-include.patch | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch new file mode 100644 index 0000000000..65b6183867 --- /dev/null +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch @@ -0,0 +1,30 @@ +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 +From: Alexandros Frantzis +Date: Mon, 14 Feb 2022 13:54:09 +0200 +Subject: [PATCH] libmatrix: Add missing include + +Fixes compilation with GCC 12. + +Fixes #169 +[Paul: backport upstream d1ca3f53c96dc8a4048b17dc16147a8fac782d4a] +Signed-off-by: Paul Cercueil +--- + + src/libmatrix/program.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h +index f95b470..1c9de08 100644 +--- a/src/libmatrix/program.h ++++ b/src/libmatrix/program.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include "mat.h" + + // Simple shader container. Abstracts all of the OpenGL bits, but leaves +-- +2.35.1 + From tim.gover at raspberrypi.com Mon Oct 31 11:46:43 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 11:46:43 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README Message-ID: <20221031114643.6648-1-tim.gover@raspberrypi.com> If a custom os_prefix directory is specified then the Raspberry Pi firmware probes for the README file in overlays directory. Since the README file is small let's include it, otherwise, the firmware won't recognize the overlays directory if the user later moves it to an os_prefix specific sub-directory. From https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared with the main OS (i.e. os_prefix is ignored). Signed-off-by: Tim Gover --- package/rpi-firmware/rpi-firmware.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index d4d1d07b3f..908d7def6a 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) ) + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ endef else -- 2.25.1 From thomas.petazzoni at bootlin.com Mon Oct 31 12:07:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:07:17 +0100 Subject: [Buildroot] [PATCH v2] configs/qemu_aarch64_ebbr: new defconfig In-Reply-To: <20220916074147.571920-1-vincent.stehle@arm.com> References: <20220914140821.3158921-1-vincent.stehle@arm.com> <20220916074147.571920-1-vincent.stehle@arm.com> Message-ID: <20221031130717.7e6e1aa6@windsurf> Hello Vincent, On Fri, 16 Sep 2022 09:41:47 +0200 Vincent Stehl? wrote: > Add a defconfig to build an AArch64 U-Boot based firmware implementing the > subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting > with UEFI, to run on Qemu. > > The generated firmware binary can also be used to install or run another OS > supporting the EBBR specification. > > We do not have Linux 5.19 headers at the moment therefore we rely on 5.17 > in the defconfig. > > [1]: https://github.com/ARM-software/ebbr > > Signed-off-by: Vincent Stehl? > Reviewed-by: Romain Naour > Reviewed-by: Giulio Benetti > > --- > Changes v1 -> v2: > - Use shortcut letter U for boot partition in genimage config file > (suggested by Giulio and Romain) > - Drop toolchain wchar from the defconfig (suggested by Giulio and > Romain) > - Mention in the commit message that we rely on Linux headers 5.17 > because we do not have 5.19 (suggested by Giulio) > +N: Vincent Stehl? > +F: configs/qemu_aarch64_ebbr_defconfig I've also added board/qemu/aarch64-ebbr/ here, and applied. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:07:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:07:25 +0100 Subject: [Buildroot] [git commit] configs/qemu_aarch64_ebbr: new defconfig Message-ID: <20221031120825.66F3D878D6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=89c245b97a1db31d0545face2d1d28de48beb488 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a defconfig to build an AArch64 U-Boot based firmware implementing the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting with UEFI, to run on Qemu. The generated firmware binary can also be used to install or run another OS supporting the EBBR specification. We do not have Linux 5.19 headers at the moment therefore we rely on 5.17 in the defconfig. [1]: https://github.com/ARM-software/ebbr Signed-off-by: Vincent Stehl?? Reviewed-by: Romain Naour Reviewed-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 4 ++ board/qemu/aarch64-ebbr/genimage.cfg | 31 ++++++++++ board/qemu/aarch64-ebbr/grub.cfg | 6 ++ board/qemu/aarch64-ebbr/post-image.sh | 11 ++++ board/qemu/aarch64-ebbr/readme.txt | 103 ++++++++++++++++++++++++++++++++++ board/qemu/aarch64-ebbr/u-boot.config | 34 +++++++++++ configs/qemu_aarch64_ebbr_defconfig | 50 +++++++++++++++++ 7 files changed, 239 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 64af4deb53..3ab4d65d67 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2989,6 +2989,10 @@ N: Vincent Prince F: package/nss-myhostname/ F: package/utp_com/ +N: Vincent Stehl?? +F: board/qemu/aarch64-ebbr/ +F: configs/qemu_aarch64_ebbr_defconfig + N: Vincent Stehl?? F: board/bananapi/bananapi-m2-zero/ F: configs/bananapi_m2_zero_defconfig diff --git a/board/qemu/aarch64-ebbr/genimage.cfg b/board/qemu/aarch64-ebbr/genimage.cfg new file mode 100644 index 0000000000..1ca8332b9c --- /dev/null +++ b/board/qemu/aarch64-ebbr/genimage.cfg @@ -0,0 +1,31 @@ +image efi-part.vfat { + vfat { + file EFI { + image = "efi-part/EFI" + } + + file Image { + image = "Image" + } + } + + size = 128M +} + +image disk.img { + hdimage { + partition-table-type = "gpt" + } + + partition boot { + image = "efi-part.vfat" + partition-type-uuid = U + offset = 32K + bootable = true + } + + partition root { + partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae + image = "rootfs.ext2" + } +} diff --git a/board/qemu/aarch64-ebbr/grub.cfg b/board/qemu/aarch64-ebbr/grub.cfg new file mode 100644 index 0000000000..d99e19c4cd --- /dev/null +++ b/board/qemu/aarch64-ebbr/grub.cfg @@ -0,0 +1,6 @@ +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /Image root=PARTLABEL=root rootwait +} diff --git a/board/qemu/aarch64-ebbr/post-image.sh b/board/qemu/aarch64-ebbr/post-image.sh new file mode 100755 index 0000000000..c884a8b6f6 --- /dev/null +++ b/board/qemu/aarch64-ebbr/post-image.sh @@ -0,0 +1,11 @@ +#!/bin/sh +set -eu + +BOARD_DIR=$(dirname "$0") + +# Create flash.bin TF-A FIP image from bl1.bin and fip.bin +dd if="${BINARIES_DIR}/bl1.bin" of="${BINARIES_DIR}/flash.bin" bs=1M +dd if="${BINARIES_DIR}/fip.bin" of="${BINARIES_DIR}/flash.bin" seek=64 bs=4096 conv=notrunc + +# Override the default GRUB configuration file with our own. +cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg" diff --git a/board/qemu/aarch64-ebbr/readme.txt b/board/qemu/aarch64-ebbr/readme.txt new file mode 100644 index 0000000000..a2027dad44 --- /dev/null +++ b/board/qemu/aarch64-ebbr/readme.txt @@ -0,0 +1,103 @@ +Introduction +============ + +The qemu_aarch64_ebbr_defconfig is meant to illustrate some aspects of the Arm +EBBR specification[1] and the Arm SystemReady IR[2] compliance program. +It allows building an AArch64 U-Boot based firmware implementing the subset of +UEFI defined by EBBR, as well as a Linux OS disk image booting with UEFI, to run +on Qemu. + +Building +======== + + $ make qemu_aarch64_ebbr_defconfig + $ make + +Generated files under output/images: + +* flash.bin: A firmware image comprising TF-A, OP-TEE and the U-Boot bootloader. + +* disk.img: An OS disk image comprising the GRUB bootloader, the Linux kernel + and the root filesystem. + +Running under Qemu +================== + +Run the emulation with: + + qemu-system-aarch64 \ + -M virt,secure=on \ + -bios output/images/flash.bin \ + -cpu cortex-a53 \ + -device virtio-blk-device,drive=hd0 \ + -device virtio-net-device,netdev=eth0 \ + -device virtio-rng-device,rng=rng0 \ + -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \ + -m 1024 \ + -netdev user,id=eth0 \ + -no-acpi \ + -nographic \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -rtc base=utc,clock=host \ + -smp 2 # qemu_aarch64_ebbr_defconfig + +The login prompt will appear in the terminal that started Qemu. + +Using the EBBR firmware to run another OS under Qemu +---------------------------------------------------- + +It is possible to use the generated firmware binary to install or run another OS +supporting the EBBR specification. + +To run another OS on emulation using a live or pre-installed image, use the same +Qemu command line as for the generated OS but adapt the OS image path in the +-drive stanza. +The image generated by the aarch64_efi_defconfig or the Arm ACS-IR images[3] are +examples of pre-installed OS images. + +To install another OS using an installer iso image, prepare a destination disk +image first with: + + qemu-img create -f qcow2 disk.qcow2 10G + +Then run the OS installer iso image on emulation with: + + qemu-system-aarch64 \ + -M virt,secure=on \ + -bios output/images/flash.bin \ + -cpu cortex-a53 \ + -device virtio-blk-device,drive=hd1 \ + -device virtio-blk-device,drive=hd0 \ + -device virtio-net-device,netdev=eth0 \ + -device virtio-rng-device,rng=rng0 \ + -drive file=,if=none,format=raw,readonly=on,id=hd0 \ + -drive file=disk.qcow2,if=none,id=hd1 \ + -m 1024 \ + -netdev user,id=eth0 \ + -no-acpi \ + -nographic \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -rtc base=utc,clock=host \ + -smp 2 + +The installation medium will show up under the Linux OS installer as /dev/vda +and the destination disk as /dev/vdb. +To reboot into the installed OS, use the same Qemu command line as for the +installation, but without the two stanzas +referring to hd0. +Linux distributions such as Debian, Fedora, openSUSE or Ubuntu provide an OS +installer iso image. + +Miscellaneous +============= + +This configuration is inspired by the qemu_aarch64_virt_defconfig, the +aarch64_efi_defconfig and the Arm SystemReady IR IoT Integration, Test, and +Certification Guide[4]. + +Firmware update is currently not supported. + +[1]: https://github.com/ARM-software/ebbr +[2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR +[3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images +[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en diff --git a/board/qemu/aarch64-ebbr/u-boot.config b/board/qemu/aarch64-ebbr/u-boot.config new file mode 100644 index 0000000000..94aae9d2aa --- /dev/null +++ b/board/qemu/aarch64-ebbr/u-boot.config @@ -0,0 +1,34 @@ +CONFIG_BOOTM_EFI=y +CONFIG_CMD_BOOTEFI=y +CONFIG_CMD_BOOTEFI_HELLO=y +CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y +CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_EFI_VARIABLE_FILE_STORE=y +CONFIG_CMD_GPT=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_RNG=y +CONFIG_CMD_RTC=y +CONFIG_DM_RTC=y +CONFIG_EFI_DEVICE_PATH_TO_TEXT=y +CONFIG_EFI_GET_TIME=y +CONFIG_EFI_HAVE_RUNTIME_RESET=y +CONFIG_EFI_LOADER=y +CONFIG_EFI_LOADER_HII=y +CONFIG_EFI_MM_COMM_TEE=y +CONFIG_EFI_PARTITION=y +CONFIG_EFI_SECURE_BOOT=y +CONFIG_EFI_SET_TIME=y +CONFIG_EFI_UNICODE_CAPITALIZATION=y +CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y +CONFIG_EFI_VARIABLE_FILE_STORE=y +CONFIG_FAT_WRITE=y +CONFIG_FIT=y +CONFIG_FS_FAT=y +CONFIG_OF_LIBFDT=y +CONFIG_OPTEE=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_RNG_OPTEE=y +CONFIG_RTC_EMULATION=y +CONFIG_SCMI_FIRMWARE=y +CONFIG_TEE=y diff --git a/configs/qemu_aarch64_ebbr_defconfig b/configs/qemu_aarch64_ebbr_defconfig new file mode 100644 index 0000000000..15822e17a3 --- /dev/null +++ b/configs/qemu_aarch64_ebbr_defconfig @@ -0,0 +1,50 @@ +# Architecture +BR2_aarch64=y + +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/aarch64-ebbr/post-image.sh support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/aarch64-ebbr/genimage.cfg" + +# Linux headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.8" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Packages +BR2_PACKAGE_OPTEE_CLIENT=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="200M" +# BR2_TARGET_ROOTFS_TAR is not set + +# Firmware and bootloader +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y +BR2_TARGET_GRUB2=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_NEEDS_DTC=y +BR2_TARGET_OPTEE_OS_PLATFORM="vexpress-qemu_armv8a" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="qemu_arm64" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/qemu/aarch64-ebbr/u-boot.config" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y + +# Host tools +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y From thomas.petazzoni at bootlin.com Mon Oct 31 12:08:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:08:14 +0100 Subject: [Buildroot] [git commit] package/python-pyyaml: add host package Message-ID: <20221031120825.7239D878D7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43c7fda8d6fd4834c2ee2d75abb0b9ed87120804 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The Jetson AGX Orin python script to flash requires host python-pyyaml. Add a Config.in.host option for the host python-pyyaml package. BR2_PACKAGE_HOST_PYTHON_PYYAML Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- package/Config.in.host | 1 + package/python-pyyaml/Config.in.host | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/package/Config.in.host b/package/Config.in.host index 8ccbf40a84..b76bea60d0 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -79,6 +79,7 @@ menu "Host utilities" source "package/python-greenlet/Config.in.host" source "package/python-kflash/Config.in.host" source "package/python-lxml/Config.in.host" + source "package/python-pyyaml/Config.in.host" source "package/python-six/Config.in.host" source "package/python-xlrd/Config.in.host" source "package/python3/Config.in.host" diff --git a/package/python-pyyaml/Config.in.host b/package/python-pyyaml/Config.in.host new file mode 100644 index 0000000000..1e8382ef5e --- /dev/null +++ b/package/python-pyyaml/Config.in.host @@ -0,0 +1,6 @@ +config BR2_PACKAGE_HOST_PYTHON_PYYAML + bool "host python-pyyaml" + help + The host PyYAML package contains binding to the libyaml API. + + http://pyyaml.org/ From thomas.petazzoni at bootlin.com Mon Oct 31 12:08:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:08:27 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/python-pyyaml: add host package In-Reply-To: <20220913191429.154837-1-christian@paral.in> References: <20220913191429.154837-1-christian@paral.in> Message-ID: <20221031130827.42da99dc@windsurf> On Tue, 13 Sep 2022 12:14:29 -0700 Christian Stewart via buildroot wrote: > The Jetson AGX Orin python script to flash requires host python-pyyaml. > > Add a Config.in.host option for the host python-pyyaml package. > > BR2_PACKAGE_HOST_PYTHON_PYYAML > > Signed-off-by: Christian Stewart > > --- Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 12:12:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:12:59 +0100 Subject: [Buildroot] [git commit] package/rpi-firmware: add option to use custom cmdline.txt Message-ID: <20221031121311.6CE81878DF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27024049426483091b1d5edc73cd225307e79540 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the rpi-firmware package. Overriding files in there can not be done with an overlay (which only applies to $(TARGET_DIR)), and thus requires using either a post-build or post-image script, which is not always very practical when a custom file must be used. Like was done in 689b9ac439ab (package/rpi-firmware: rework boot/config file handling) for config.txt, add an option to allow users to specify the path to a custom cmdline.txt. Signed-off-by: Yann E. MORIN Cc: Peter Seiderer Signed-off-by: Yann E. MORIN --- {package/rpi-firmware => board/raspberrypi}/cmdline.txt | 0 package/rpi-firmware/Config.in | 7 +++++++ package/rpi-firmware/rpi-firmware.mk | 10 +++++++++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/package/rpi-firmware/cmdline.txt b/board/raspberrypi/cmdline.txt similarity index 100% rename from package/rpi-firmware/cmdline.txt rename to board/raspberrypi/cmdline.txt diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in index 8070dc3019..a9aeaed745 100644 --- a/package/rpi-firmware/Config.in +++ b/package/rpi-firmware/Config.in @@ -69,6 +69,13 @@ config BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE Path to a file stored as config.txt in the boot partiton of the generated SD card image. +config BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE + string "Path to a file stored as boot/cmdline.txt" + default "board/raspberrypi/cmdline.txt" # legacy + help + Path to a file stored as cmdline.txt in the boot partiton + of the generated SD card image. + config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS bool "Install Device Tree Blobs (DTBs)" default y diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index d4d1d07b3f..6f5902fd52 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -35,6 +35,14 @@ define RPI_FIRMWARE_INSTALL_CONFIG endef endif +RPI_FIRMWARE_CMDLINE_FILE = $(call qstrip,$(BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE)) +ifneq ($(RPI_FIRMWARE_CMDLINE_FILE),) +define RPI_FIRMWARE_INSTALL_CMDLINE + $(INSTALL) -D -m 0644 $(RPI_FIRMWARE_CMDLINE_FILE) \ + $(BINARIES_DIR)/rpi-firmware/cmdline.txt +endef +endif + ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y) define RPI_FIRMWARE_INSTALL_DTB $(foreach dtb,$(wildcard $(@D)/boot/*.dtb), \ @@ -79,9 +87,9 @@ endef endif # INSTALL_VCDBG define RPI_FIRMWARE_INSTALL_IMAGES_CMDS - $(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt $(RPI_FIRMWARE_INSTALL_BIN) $(RPI_FIRMWARE_INSTALL_CONFIG) + $(RPI_FIRMWARE_INSTALL_CMDLINE) $(RPI_FIRMWARE_INSTALL_DTB) $(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS) endef From yann.morin.1998 at free.fr Mon Oct 31 12:13:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:13:26 +0100 Subject: [Buildroot] [PATCH] package/rpi-firmware: add option to use custom cmdline.txt In-Reply-To: <20220724131202.1364133-1-yann.morin.1998@free.fr> References: <20220724131202.1364133-1-yann.morin.1998@free.fr> Message-ID: <20221031121326.GA1058960@scaer> All, On 2022-07-24 15:12 +0200, Yann E. MORIN spake thusly: > Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the > rpi-firmware package. Overriding files in there can not be done with an > overlay (which only applies to $(TARGET_DIR)), and thus requires using > either a post-build or post-image script, which is not always very > practical when a custom file must be used. > > Like was done in 689b9ac439ab (package/rpi-firmware: rework boot/config > file handling) for config.txt, add an option to allow users to specify > the path to a custom cmdline.txt. > > Signed-off-by: Yann E. MORIN > Cc: Peter Seiderer Applied to master, thanks. Regards, Yann E. MORIN. > --- > .../rpi-firmware => board/raspberrypi}/cmdline.txt | 0 > package/rpi-firmware/Config.in | 7 +++++++ > package/rpi-firmware/rpi-firmware.mk | 10 +++++++++- > 3 files changed, 16 insertions(+), 1 deletion(-) > rename {package/rpi-firmware => board/raspberrypi}/cmdline.txt (100%) > > diff --git a/package/rpi-firmware/cmdline.txt b/board/raspberrypi/cmdline.txt > similarity index 100% > rename from package/rpi-firmware/cmdline.txt > rename to board/raspberrypi/cmdline.txt > diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in > index 8070dc3019..a9aeaed745 100644 > --- a/package/rpi-firmware/Config.in > +++ b/package/rpi-firmware/Config.in > @@ -69,6 +69,13 @@ config BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE > Path to a file stored as config.txt in the boot partiton > of the generated SD card image. > > +config BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE > + string "Path to a file stored as boot/cmdline.txt" > + default "board/raspberrypi/cmdline.txt" # legacy > + help > + Path to a file stored as cmdline.txt in the boot partiton > + of the generated SD card image. > + > config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS > bool "Install Device Tree Blobs (DTBs)" > default y > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > index d4d1d07b3f..6f5902fd52 100644 > --- a/package/rpi-firmware/rpi-firmware.mk > +++ b/package/rpi-firmware/rpi-firmware.mk > @@ -35,6 +35,14 @@ define RPI_FIRMWARE_INSTALL_CONFIG > endef > endif > > +RPI_FIRMWARE_CMDLINE_FILE = $(call qstrip,$(BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE)) > +ifneq ($(RPI_FIRMWARE_CMDLINE_FILE),) > +define RPI_FIRMWARE_INSTALL_CMDLINE > + $(INSTALL) -D -m 0644 $(RPI_FIRMWARE_CMDLINE_FILE) \ > + $(BINARIES_DIR)/rpi-firmware/cmdline.txt > +endef > +endif > + > ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y) > define RPI_FIRMWARE_INSTALL_DTB > $(foreach dtb,$(wildcard $(@D)/boot/*.dtb), \ > @@ -79,9 +87,9 @@ endef > endif # INSTALL_VCDBG > > define RPI_FIRMWARE_INSTALL_IMAGES_CMDS > - $(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt > $(RPI_FIRMWARE_INSTALL_BIN) > $(RPI_FIRMWARE_INSTALL_CONFIG) > + $(RPI_FIRMWARE_INSTALL_CMDLINE) > $(RPI_FIRMWARE_INSTALL_DTB) > $(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS) > endef > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:18:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:18:21 +0100 Subject: [Buildroot] [git commit] package/wpa_supplicant: fix static build issue with zlib-ng Message-ID: <20221031121831.250B5878F6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27e66d77c10b3ae3142a5ff8631ba81ce9cf70dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Hostapd/wpa_s uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is too generic. Buildroot autobuilder detected configurations that failed to build due to the naming conflict with zlib-ng. Add wpa_supplicant part of the upstream patch that renames 'crc32' function to a less generic 'ieee80211_crc32' name. Fixes: http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- ...ant-use-a-less-generic-name-for-IEEE802.1.patch | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch b/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch new file mode 100644 index 0000000000..a8637111bb --- /dev/null +++ b/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch @@ -0,0 +1,79 @@ +From c8af2e431b47d7d900e0c7359705aaa1096d302a Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich +Date: Fri, 16 Sep 2022 23:18:50 +0300 +Subject: [PATCH] wpa_supplicant: use a less generic name for IEEE802.11 CRC-32 routine + +Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is +too generic. Buildroot autobuilder detected build configuration that +failed to build due to the naming conflict: static linking with openssl +using zlib-ng as a zlib provider, e.g. see: +- http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ +- http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ + +Use a less generic name ieee80211_crc32 for IEEE802.11 CRC-32 routine +to avoid such naming conflicts. + +Upstream: https://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 +Signed-off-by: Sergey Matyukevich +--- + src/ap/hostapd.c | 3 ++- + src/ap/neighbor_db.c | 2 +- + src/utils/crc32.c | 2 +- + src/utils/crc32.h | 2 +- + 4 files changed, 5 insertions(+), 4 deletions(-) + +diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c +index 4b88641a2..56c8fb90e 100644 +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -1230,7 +1230,8 @@ static int hostapd_setup_bss(struct hostapd_data *hapd, int first) + * Short SSID calculation is identical to FCS and it is defined in + * IEEE P802.11-REVmd/D3.0, 9.4.2.170.3 (Calculating the Short-SSID). + */ +- conf->ssid.short_ssid = crc32(conf->ssid.ssid, conf->ssid.ssid_len); ++ conf->ssid.short_ssid = ieee80211_crc32(conf->ssid.ssid, ++ conf->ssid.ssid_len); + + if (!hostapd_drv_none(hapd)) { + wpa_printf(MSG_DEBUG, "Using interface %s with hwaddr " MACSTR +diff --git a/src/ap/neighbor_db.c b/src/ap/neighbor_db.c +index 229edd2a9..ef17634c3 100644 +--- a/src/ap/neighbor_db.c ++++ b/src/ap/neighbor_db.c +@@ -136,7 +136,7 @@ int hostapd_neighbor_set(struct hostapd_data *hapd, const u8 *bssid, + + os_memcpy(entry->bssid, bssid, ETH_ALEN); + os_memcpy(&entry->ssid, ssid, sizeof(entry->ssid)); +- entry->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ entry->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + + entry->nr = wpabuf_dup(nr); + if (!entry->nr) +diff --git a/src/utils/crc32.c b/src/utils/crc32.c +index 12d9e2a70..371254994 100644 +--- a/src/utils/crc32.c ++++ b/src/utils/crc32.c +@@ -72,7 +72,7 @@ static const u32 crc32_table[256] = { + }; + + +-u32 crc32(const u8 *frame, size_t frame_len) ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len) + { + size_t i; + u32 crc; +diff --git a/src/utils/crc32.h b/src/utils/crc32.h +index dc31399be..71a19dc5f 100644 +--- a/src/utils/crc32.h ++++ b/src/utils/crc32.h +@@ -9,6 +9,6 @@ + #ifndef CRC32_H + #define CRC32_H + +-u32 crc32(const u8 *frame, size_t frame_len); ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len); + + #endif /* CRC32_H */ +-- +2.37.1 + From thomas.petazzoni at bootlin.com Mon Oct 31 12:18:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:18:21 +0100 Subject: [Buildroot] [git commit] package/hostapd: fix static build issue with zlib-ng Message-ID: <20221031121831.1AC0F878F5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7d920f9d4060d7603da2074c3db167c39e4881fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is too generic. Buildroot autobuilder detected configurations that failed to build due to the naming conflict with zlib-ng. Add hostapd part of the upstream patch that renames 'crc32' function to a less generic 'ieee80211_crc32' name. Fixes: http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- ...generic-name-for-IEEE802.11-CRC-32-routin.patch | 102 +++++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch b/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch new file mode 100644 index 0000000000..bf85e97f21 --- /dev/null +++ b/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch @@ -0,0 +1,102 @@ +From 9896d8c116f054cebc49928404018a75c9b892cb Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich +Date: Fri, 16 Sep 2022 23:18:50 +0300 +Subject: [PATCH] hostapd: use a less generic name for IEEE802.11 CRC-32 routine + +Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is +too generic. Buildroot autobuilder detected build configuration that +failed to build due to the naming conflict: static linking with openssl +using zlib-ng as a zlib provider, e.g. see: +- http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ +- http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ + +Use a less generic name ieee80211_crc32 for IEEE802.11 CRC-32 routine +to avoid such naming conflicts. + +Upstream: https://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 +Signed-off-by: Sergey Matyukevich +--- + hostapd/config_file.c | 4 ++-- + src/ap/hostapd.c | 3 ++- + src/ap/neighbor_db.c | 2 +- + src/utils/crc32.c | 2 +- + src/utils/crc32.h | 2 +- + 5 files changed, 7 insertions(+), 6 deletions(-) + +diff --git a/hostapd/config_file.c b/hostapd/config_file.c +index b14728d1b..b38a84647 100644 +--- a/hostapd/config_file.c ++++ b/hostapd/config_file.c +@@ -2407,7 +2407,7 @@ static int hostapd_config_fill(struct hostapd_config *conf, + } + os_memcpy(ssid->ssid, pos, ssid->ssid_len); + ssid->ssid_set = 1; +- ssid->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ ssid->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + } else if (os_strcmp(buf, "ssid2") == 0) { + struct hostapd_ssid *ssid = &bss->ssid; + size_t slen; +@@ -2421,7 +2421,7 @@ static int hostapd_config_fill(struct hostapd_config *conf, + os_memcpy(ssid->ssid, str, slen); + ssid->ssid_len = slen; + ssid->ssid_set = 1; +- ssid->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ ssid->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + os_free(str); + } else if (os_strcmp(buf, "utf8_ssid") == 0) { + bss->ssid.utf8_ssid = atoi(pos) > 0; +diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c +index 4b88641a2..56c8fb90e 100644 +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -1230,7 +1230,8 @@ static int hostapd_setup_bss(struct hostapd_data *hapd, int first) + * Short SSID calculation is identical to FCS and it is defined in + * IEEE P802.11-REVmd/D3.0, 9.4.2.170.3 (Calculating the Short-SSID). + */ +- conf->ssid.short_ssid = crc32(conf->ssid.ssid, conf->ssid.ssid_len); ++ conf->ssid.short_ssid = ieee80211_crc32(conf->ssid.ssid, ++ conf->ssid.ssid_len); + + if (!hostapd_drv_none(hapd)) { + wpa_printf(MSG_DEBUG, "Using interface %s with hwaddr " MACSTR +diff --git a/src/ap/neighbor_db.c b/src/ap/neighbor_db.c +index 229edd2a9..ef17634c3 100644 +--- a/src/ap/neighbor_db.c ++++ b/src/ap/neighbor_db.c +@@ -136,7 +136,7 @@ int hostapd_neighbor_set(struct hostapd_data *hapd, const u8 *bssid, + + os_memcpy(entry->bssid, bssid, ETH_ALEN); + os_memcpy(&entry->ssid, ssid, sizeof(entry->ssid)); +- entry->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ entry->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + + entry->nr = wpabuf_dup(nr); + if (!entry->nr) +diff --git a/src/utils/crc32.c b/src/utils/crc32.c +index 12d9e2a70..371254994 100644 +--- a/src/utils/crc32.c ++++ b/src/utils/crc32.c +@@ -72,7 +72,7 @@ static const u32 crc32_table[256] = { + }; + + +-u32 crc32(const u8 *frame, size_t frame_len) ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len) + { + size_t i; + u32 crc; +diff --git a/src/utils/crc32.h b/src/utils/crc32.h +index dc31399be..71a19dc5f 100644 +--- a/src/utils/crc32.h ++++ b/src/utils/crc32.h +@@ -9,6 +9,6 @@ + #ifndef CRC32_H + #define CRC32_H + +-u32 crc32(const u8 *frame, size_t frame_len); ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len); + + #endif /* CRC32_H */ +-- +2.37.1 + From thomas.petazzoni at bootlin.com Mon Oct 31 12:19:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:19:04 +0100 Subject: [Buildroot] [PATCH v2 0/2] hostapd/wpa_s: fix static build issue with zlib-ng In-Reply-To: <20220916210059.2395129-1-geomatsi@gmail.com> References: <20220916210059.2395129-1-geomatsi@gmail.com> Message-ID: <20221031131904.329c060d@windsurf> Hello Sergey, On Sat, 17 Sep 2022 00:00:57 +0300 Sergey Matyukevich wrote: > This patch series applies appropriate hostapd upstream fix that renames > 'crc32' function to a less generic name, see: > http://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 Thanks for pushing it upstream! This link should have been added in each patch, so that we know their upstream status. I fixed that up and applied both patches. Once again, many thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:20:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:20:03 +0100 Subject: [Buildroot] [git commit] utils/genrandconfig: handle a10disp Message-ID: <20221031122013.2F089878FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bada3ae53f051e3788bdacb8483cd386c2f4a419 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master a10disp will raise the following build failure with a mainline kernel: cp: cannot stat '/home/autobuild/autobuild/instance-0/output-1/build/linux-5.17.15/include/video/sunxi_disp_ioctl.h': No such file or directory Fixes: - http://autobuild.buildroot.org/results/1f2607d6adece4d5dfe17fbdb032a2d228fc030f Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- utils/genrandconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/utils/genrandconfig b/utils/genrandconfig index 257fe7b520..f19a405685 100755 --- a/utils/genrandconfig +++ b/utils/genrandconfig @@ -308,6 +308,8 @@ def fixup_config(sysinfo, configfile): if 'BR2_PACKAGE_AUFS_UTIL=y\n' in configlines and \ 'BR2_PACKAGE_AUFS_UTIL_VERSION=""\n' in configlines: return False + if 'BR2_PACKAGE_A10DISP=y\n' in configlines: + return False if 'BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE=y\n' in configlines and \ 'BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SOURCE=""\n' in configlines and \ From thomas.petazzoni at bootlin.com Mon Oct 31 12:20:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:20:16 +0100 Subject: [Buildroot] [PATCH 1/1] utils/genrandconfig: handle a10disp In-Reply-To: <20220918162850.25720-1-fontaine.fabrice@gmail.com> References: <20220918162850.25720-1-fontaine.fabrice@gmail.com> Message-ID: <20221031132016.5c6c03ba@windsurf> On Sun, 18 Sep 2022 18:28:50 +0200 Fabrice Fontaine wrote: > a10disp will raise the following build failure with a mainline kernel: > > cp: cannot stat '/home/autobuild/autobuild/instance-0/output-1/build/linux-5.17.15/include/video/sunxi_disp_ioctl.h': No such file or directory > > Fixes: > - http://autobuild.buildroot.org/results/1f2607d6adece4d5dfe17fbdb032a2d228fc030f > > Signed-off-by: Fabrice Fontaine > --- > utils/genrandconfig | 2 ++ > 1 file changed, 2 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:19 +0100 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> Message-ID: <20221031132519.4e5ebc69@windsurf> Hello Giulio, On Wed, 19 Oct 2022 01:46:17 +0200 Giulio Benetti wrote: > At the moment all APIs folders are copied to target increasing the size of > rootfs of ~190MB. Allow to select which API folders we want to copy to > target to shrink rootfs down. > > Signed-off-by: Giulio Benetti Thanks for proposing this. Practically speaking, could you describe which folders are needed in a typical scenario you've had? Here, I have these ones: drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 2.0-api drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 3.5-api drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 4.0 drwxr-xr-x 2 thomas thomas 12288 oct. 25 22:58 4.0-api drwxr-xr-x 4 thomas thomas 16384 oct. 25 22:58 4.5 drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.8-api drwxr-xr-x 145 thomas thomas 12288 oct. 25 22:56 gac drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 lldb drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 mono-configuration-crypto drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 monodoc drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 msbuild drwxr-xr-x 6 thomas thomas 4096 oct. 25 22:56 xbuild drwxr-xr-x 4 thomas thomas 4096 oct. 25 22:56 xbuild-frameworks > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + bool "Specify folders to install to target" > + help > + Allow to specify which Mono folder to install to target I don't really have a very good suggestion, but I don't like the name of the option. We rarely have option names that are "sentences", i.e "specify folders to install" is a sentence. Should we instead have a single string option BR2_PACKAGE_MONO_INSTALL_LIB_DIRS, which is empty by default. When empty, it means all folders are installed. Otherwise, only the specified folders are installed. The other obvious question is whether this shouldn't simply be left as something to do in a post-build script. Even though I admit that reducing 190 MB down to something reasonable can be seen as something that is almost mandatory. Or alternatively, do we have a better way, where we could automate this selection of which folders are needed? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:39 +0100 Subject: [Buildroot] [git commit] package/oracle-mysql: add CPE variables Message-ID: <20221031122549.267DD8790B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fbe2a973da559ecf6fec9c2fa313cfa1fd50ea6e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/oracle-mysql/oracle-mysql.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/oracle-mysql/oracle-mysql.mk b/package/oracle-mysql/oracle-mysql.mk index f1f16abbb4..1086e4125f 100644 --- a/package/oracle-mysql/oracle-mysql.mk +++ b/package/oracle-mysql/oracle-mysql.mk @@ -13,6 +13,8 @@ ORACLE_MYSQL_DEPENDENCIES = ncurses ORACLE_MYSQL_AUTORECONF = YES ORACLE_MYSQL_LICENSE = GPL-2.0 ORACLE_MYSQL_LICENSE_FILES = README COPYING +ORACLE_MYSQL_CPE_ID_VENDOR = oracle +ORACLE_MYSQL_CPE_ID_PRODUCT = mysql ORACLE_MYSQL_SELINUX_MODULES = mysql ORACLE_MYSQL_PROVIDES = mysql ORACLE_MYSQL_CONFIG_SCRIPTS = mysql_config From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/oracle-mysql: add CPE variables In-Reply-To: <20221018213756.268341-1-fontaine.fabrice@gmail.com> References: <20221018213756.268341-1-fontaine.fabrice@gmail.com> Message-ID: <20221031132553.6a926799@windsurf> On Tue, 18 Oct 2022 23:37:56 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql > > Signed-off-by: Fabrice Fontaine > --- > package/oracle-mysql/oracle-mysql.mk | 2 ++ > 1 file changed, 2 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 12:39:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:39:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031114643.6648-1-tim.gover@raspberrypi.com> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> Message-ID: <20221031123928.GB1058960@scaer> Tim, All, On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > If a custom os_prefix directory is specified then the Raspberry Pi > firmware probes for the README file in overlays directory. > > Since the README file is small let's include it, otherwise, 197KiB is _not_ small. In fact, the README is bigger than every dtbo, and accounts for ~25% of the size of all dtbo combined. > the firmware won't recognize the overlays directory if the user > later moves it to an os_prefix specific sub-directory. What is the goal here, in the context of Buildroot, where we only install one set of overlays? If a user moved the overlays, they already have a script that does that, so they should also ensure that script properly prepares config.txt to specify the proper os_prefix, and so it is just a matter of adding a 'touch' on the README in the same script. Regards, Yann E. MORIN. > From > https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix > > Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared > with the main OS (i.e. os_prefix is ignored). > > Signed-off-by: Tim Gover > --- > package/rpi-firmware/rpi-firmware.mk | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > index d4d1d07b3f..908d7def6a 100644 > --- a/package/rpi-firmware/rpi-firmware.mk > +++ b/package/rpi-firmware/rpi-firmware.mk > @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS > $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ > $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) > ) > + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ > $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ > endef > else > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From raphael.pavlidis at gmail.com Mon Oct 31 12:46:25 2022 From: raphael.pavlidis at gmail.com (Raphael Pavlidis) Date: Mon, 31 Oct 2022 13:46:25 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/sway: new package Message-ID: <20221031124625.21172-1-raphael.pavlidis@gmail.com> i3-compatible Wayland compositor This Wayland compositor can be used as a kiosk compositor like cage, but with the advantage of better configuration of multiple monitor and windows. For example, move a window by title to the output X or set the resolution of Y to Z. Signed-off-by: Raphael Pavlidis --- DEVELOPERS | 3 ++- package/Config.in | 1 + package/sway/Config.in | 42 ++++++++++++++++++++++++++++++++++++++++++ package/sway/sway.hash | 3 +++ package/sway/sway.mk | 36 ++++++++++++++++++++++++++++++++++++ 5 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 package/sway/Config.in create mode 100644 package/sway/sway.hash create mode 100644 package/sway/sway.mk diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..0390b94519 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2477,8 +2477,9 @@ F: support/testing/tests/package/test_python_jmespath.py F: support/testing/tests/package/test_python_rsa.py F: support/testing/tests/package/test_python_s3transfer.py -N: Raphael Pavlidis +N: Raphael Pavlidis F: package/slirp4netns/ +F: package/sway/ N: Refik Tuzakli F: package/freescale-imx/ diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..c70729734d 100644 --- a/package/Config.in +++ b/package/Config.in @@ -325,6 +325,7 @@ comment "Graphic applications" source "package/qt5cinex/Config.in" source "package/rrdtool/Config.in" source "package/stellarium/Config.in" + source "package/sway/Config.in" source "package/tesseract-ocr/Config.in" source "package/tinifier/Config.in" diff --git a/package/sway/Config.in b/package/sway/Config.in new file mode 100644 index 0000000000..cdeca16fc0 --- /dev/null +++ b/package/sway/Config.in @@ -0,0 +1,42 @@ +config BR2_PACKAGE_SWAY + bool "sway" + depends on BR2_PACKAGE_SYSTEMD # is required by the sd-bus provider + depends on !BR2_STATIC_LIBS # wlroots + depends on BR2_TOOLCHAIN_HAS_THREADS # wlroots + depends on BR2_PACKAGE_HAS_LIBEGL # wlroots + depends on BR2_PACKAGE_HAS_LIBEGL_WAYLAND # wlroots + depends on BR2_PACKAGE_HAS_LIBGLES # wlroots + depends on BR2_PACKAGE_HAS_UDEV # wlroots + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # json-c + depends on BR2_USE_WCHAR # pango + depends on BR2_TOOLCHAIN_HAS_THREADS # pango + depends on BR2_USE_MMU # pango + depends on BR2_INSTALL_LIBSTDCPP # pango + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # pango + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # pango + select BR2_PACKAGE_WLROOTS + select BR2_PACKAGE_JSON_C + select BR2_PACKAGE_PCRE + select BR2_PACKAGE_CAIRO + select BR2_PACKAGE_CAIRO_PNG + select BR2_PACKAGE_PANGO + help + i3-compatible Wayland compositor + + https://github.com/swaywm/sway + +comment "sway needs systemd, udev, EGL w/ Wayland backend and OpenGL ES support" + depends on !BR2_PACKAGE_SYSTEMD || \ + !BR2_PACKAGE_HAS_UDEV || \ + !BR2_PACKAGE_HAS_LIBEGL || \ + !BR2_PACKAGE_HAS_LIBEGL_WAYLAND || \ + !BR2_PACKAGE_HAS_LIBGLES + +comment "sway needs a toolchain w/ wchar, threads, C++, dynamic library, gcc >= 4.9" + depends on BR2_USE_MMU + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 || \ + !BR2_INSTALL_LIBSTDCPP || \ + BR2_STATIC_LIBS diff --git a/package/sway/sway.hash b/package/sway/sway.hash new file mode 100644 index 0000000000..6dfa71730f --- /dev/null +++ b/package/sway/sway.hash @@ -0,0 +1,3 @@ +# Locally computed, tarball verified with GPG signature +sha256 0c64536fb2883ec518e75cfb119f9300115fb49b084e3fde62b794fe2c6c8d84 sway-1.7.tar.gz +sha256 bd35722bff46327f5eded1d211207277bbe043d2a22048b282c42ef801593b8b LICENSE diff --git a/package/sway/sway.mk b/package/sway/sway.mk new file mode 100644 index 0000000000..6bf49dbb6b --- /dev/null +++ b/package/sway/sway.mk @@ -0,0 +1,36 @@ +################################################################################ +# +# sway +# +################################################################################ + +SWAY_VERSION = 1.7 +SWAY_SITE = $(call github,swaywm,sway,v$(SWAY_VERSION)) +SWAY_LICENSE = MIT +SWAY_LICENSE_FILES = LICENSE +SWAY_DEPENDENCIES = systemd host-pkgconf wlroots json-c pcre cairo pango +SWAY_CONF_OPTS = \ + -Dwerror=false \ + -Ddefault-wallpaper=false \ + -Dzsh-completions=false \ + -Dbash-completions=false \ + -Dfish-completions=false \ + -Dswaybar=false \ + -Dswaynag=false \ + -Dtray=disabled \ + -Dman-pages=disabled \ + -Dsd-bus-provider=libsystemd + +ifeq ($(BR2_PACKAGE_WLROOTS_X11),y) +SWAY_CONF_OPTS += -Dxwayland=enabled +else +SWAY_CONF_OPTS += -Dxwayland=disabled +endif + +ifeq ($(BR2_PACKAGE_GDK_PIXBUF),y) +SWAY_CONF_OPTS += -Dgdk-pixbuf=enabled +else +SWAY_CONF_OPTS += -Dgdk-pixbuf=disabled +endif + +$(eval $(meson-package)) -- 2.37.4 From thomas.petazzoni at bootlin.com Mon Oct 31 12:46:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:46:55 +0100 Subject: [Buildroot] [git commit] package/docopt-cpp: new package Message-ID: <20221031124743.AB50787917@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43f96ced67c9a1f84d3f0edf5cd632178eb176b8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add docopt.cpp library that can be used to create intuitive command line interfaces with very little code by describing the valid calls using the (POSIX.1-2017) command line utility argument syntax. Signed-off-by: Eero Aaltonen Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/docopt-cpp/Config.in | 21 +++++++++++++++++++++ package/docopt-cpp/docopt-cpp.hash | 6 ++++++ package/docopt-cpp/docopt-cpp.mk | 13 +++++++++++++ 5 files changed, 44 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 3ab4d65d67..06ee5d8056 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -781,6 +781,9 @@ F: board/acmesystems/acqua-a5/ F: configs/acmesystems_acqua_a5_256mb_defconfig F: configs/acmesystems_acqua_a5_512mb_defconfig +N: Eero Aaltonen +F: package/docopt-cpp/ + N: Eloi Bail F: package/bayer2rgb-neon/ F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ diff --git a/package/Config.in b/package/Config.in index 450a73d4ca..238d7813f0 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2119,6 +2119,7 @@ endmenu menu "Text and terminal handling" source "package/augeas/Config.in" + source "package/docopt-cpp/Config.in" source "package/enchant/Config.in" source "package/fmt/Config.in" source "package/fstrcmp/Config.in" diff --git a/package/docopt-cpp/Config.in b/package/docopt-cpp/Config.in new file mode 100644 index 0000000000..ac85442732 --- /dev/null +++ b/package/docopt-cpp/Config.in @@ -0,0 +1,21 @@ +config BR2_PACKAGE_DOCOPT_CPP + bool "docopt-cpp" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 + help + docopt is a library that lets you define a command line + interface with the utility argument syntax that has been + used by command line utilities for decades (POSIX.1-2017). + From the description, docopt automatically generates a parser + for the command line arguments. + + docopt Command-line interface description language + http://docopt.org/ + + docopt.cpp is a C++ port of docopt. + + https://github.com/docopt/docopt.cpp + +comment "docopt-cpp needs a toolchain w/ C++, gcc >= 4.7" + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 diff --git a/package/docopt-cpp/docopt-cpp.hash b/package/docopt-cpp/docopt-cpp.hash new file mode 100644 index 0000000000..c535914753 --- /dev/null +++ b/package/docopt-cpp/docopt-cpp.hash @@ -0,0 +1,6 @@ +# Locally computed: +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 docopt-cpp-0.6.3.tar.gz + +# Hash for license files: +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE-Boost-1.0 +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 LICENSE-MIT diff --git a/package/docopt-cpp/docopt-cpp.mk b/package/docopt-cpp/docopt-cpp.mk new file mode 100644 index 0000000000..d90b82820f --- /dev/null +++ b/package/docopt-cpp/docopt-cpp.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# docopt.cpp +# +################################################################################ + +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SITE = $(call github,docopt,docopt.cpp,v$(DOCOPT_CPP_VERSION)) +DOCOPT_CPP_INSTALL_STAGING = YES +DOCOPT_CPP_LICENSE = BSL-1.0 or MIT +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT + +$(eval $(cmake-package)) From tim.gover at raspberrypi.com Mon Oct 31 12:52:15 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 12:52:15 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031123928.GB1058960@scaer> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> Message-ID: On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > Tim, All, > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > If a custom os_prefix directory is specified then the Raspberry Pi > > firmware probes for the README file in overlays directory. > > > > Since the README file is small let's include it, otherwise, > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > and accounts for ~25% of the size of all dtbo combined. Good point. Would you be happy with simply creating an empty or small README file (a note indicating the purpose of the file) ? > > the firmware won't recognize the overlays directory if the user > > later moves it to an os_prefix specific sub-directory. > > What is the goal here, in the context of Buildroot, where we only > install one set of overlays? > > If a user moved the overlays, they already have a script that does that, > so they should also ensure that script properly prepares config.txt to > specify the proper os_prefix, and so it is just a matter of adding a > 'touch' on the README in the same script. It's fairly common for non-expert users to modify the output of a buildroot image without re-building the image themselves. Adding a README file reduces the risk of them being tripped up by this difference in behaviour. > > Regards, > Yann E. MORIN. > > > From > > https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix > > > > Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared > > with the main OS (i.e. os_prefix is ignored). > > > > Signed-off-by: Tim Gover > > --- > > package/rpi-firmware/rpi-firmware.mk | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > > index d4d1d07b3f..908d7def6a 100644 > > --- a/package/rpi-firmware/rpi-firmware.mk > > +++ b/package/rpi-firmware/rpi-firmware.mk > > @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS > > $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ > > $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) > > ) > > + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ > > $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ > > endef > > else > > -- > > 2.25.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 12:54:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:54:05 +0100 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221031132519.4e5ebc69@windsurf> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> <20221031132519.4e5ebc69@windsurf> Message-ID: <20221031125405.GC1058960@scaer> Giulio, Thomas, All, On 2022-10-31 13:25 +0100, Thomas Petazzoni via buildroot spake thusly: > On Wed, 19 Oct 2022 01:46:17 +0200 > Giulio Benetti wrote: > > At the moment all APIs folders are copied to target increasing the size of > > rootfs of ~190MB. Allow to select which API folders we want to copy to > > target to shrink rootfs down. > > > > Signed-off-by: Giulio Benetti > Practically speaking, could you describe which folders are needed in a > typical scenario you've had? Yes, can you provide a rationale for when only a subset of APIs is needed? > Here, I have these ones: > > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 2.0-api > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 3.5-api > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 4.0 > drwxr-xr-x 2 thomas thomas 12288 oct. 25 22:58 4.0-api > drwxr-xr-x 4 thomas thomas 16384 oct. 25 22:58 4.5 > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.8-api > drwxr-xr-x 145 thomas thomas 12288 oct. 25 22:56 gac > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 lldb > drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 mono-configuration-crypto > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 monodoc > drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 msbuild > drwxr-xr-x 6 thomas thomas 4096 oct. 25 22:56 xbuild > drwxr-xr-x 4 thomas thomas 4096 oct. 25 22:56 xbuild-frameworks It looks like we have three sets of directories here; - version-based dirs: from 2.0-api up to 4.8-api - gac/: big number of subdirs in there... - the rest Your change trat them all on the same level, but are they all really superfluous? Is there a set that absolutely needs to be there, or can we really do with just one (or even none, see below)? Note: can we unconditionally get rid of monodoc/? Of msbuild/? Of lldb/? > > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > > + bool "Specify folders to install to target" > > + help > > + Allow to specify which Mono folder to install to target > > I don't really have a very good suggestion, but I don't like the name > of the option. We rarely have option names that are "sentences", i.e > "specify folders to install" is a sentence. > > Should we instead have a single string option > BR2_PACKAGE_MONO_INSTALL_LIB_DIRS, which is empty by default. When > empty, it means all folders are installed. Otherwise, only the > specified folders are installed. Agreed. I expect that having no API level installed would yield a non-working system, so: config BR2_PACKAGE_MONO_API_VERSIONS string "API versions to install" help Keep empty to install all. > The other obvious question is whether this shouldn't simply be left as > something to do in a post-build script. Even though I admit that > reducing 190 MB down to something reasonable can be seen as something > that is almost mandatory. > > Or alternatively, do we have a better way, where we could automate this > selection of which folders are needed? I would prefer we avoid carrying the list of versionned APIs (and the rest, see above). Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:54:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:54:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package In-Reply-To: <20221019143219.329504-1-eero.aaltonen@vaisala.com> References: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Message-ID: <20221031135455.32d64698@windsurf> Hello Eero, On Wed, 19 Oct 2022 17:32:19 +0300 Eero Aaltonen via buildroot wrote: > Add docopt.cpp library that can be used to create intuitive command > line interfaces with very little code by describing the valid calls > using the (POSIX.1-2017) command line utility argument syntax. > > Signed-off-by: Eero Aaltonen Thanks a lot for your patch! I'm adding in Cc Angelo, who helped by reviewing/testing your patch. I have applied your patch, but after doing a number of changes, which are described below. Angelo: look below as well, to see the few things that you missed as part of your review, as it will definitely help in doing more detailed reviews in the future! > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/docopt.cpp/Config.in | 15 +++++++++++++++ > package/docopt.cpp/docopt.cpp.hash | 6 ++++++ > package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ > 5 files changed, 38 insertions(+) I renamed to package/docopt-cpp/. I don't think we have other packages with a "." in their name, and I didn't want to create a new situation. > diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in > new file mode 100644 > index 0000000000..655a656398 > --- /dev/null > +++ b/package/docopt.cpp/Config.in > @@ -0,0 +1,15 @@ > +config BR2_PACKAGE_DOCOPT_CPP > + bool "docopt.cpp" > + depends on BR2_INSTALL_LIBSTDCPP > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 > + help > + docopt is a library that lets you define a command line > + interface with the utility argument syntax that has been > + used by command line utilities for decades (POSIX.1-2017). > + From the description, docopt automatically generates a parser > + for the command line arguments. > + > + docopt Command-line interface description language > + http://docopt.org/ > + > + docopt C++ port https://github.com/docopt/docopt.cpp The last line of the help text should only contain the upstream URL of the project, so I reformatted a bit to match this requirement. Also, you had forgotten a Config.in comment to document the C++ and gcc 4.7+ dependencies, so I have added: +comment "docopt-cpp needs a toolchain w/ C++, gcc >= 4.7" + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 > diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/docopt.cpp.mk > new file mode 100644 > index 0000000000..647071243a > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# docopt.cpp > +# > +################################################################################ > + > +DOCOPT_CPP_VERSION = 0.6.3 > +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz > +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags You should have use the github macro here: +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SITE = $(call github,docopt,docopt.cpp,v$(DOCOPT_CPP_VERSION)) > +DOCOPT_CPP_INSTALL_STAGING = YES > +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT The LICENSE variable was missing, so I've added it: +DOCOPT_CPP_LICENSE = BSL-1.0 or MIT Again, applied with all those changes. See: https://gitlab.com/buildroot.org/buildroot/-/commit/43f96ced67c9a1f84d3f0edf5cd632178eb176b8 Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 13:14:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 14:14:44 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> Message-ID: <20221031131444.GD1058960@scaer> Tim, All, On 2022-10-31 12:52 +0000, Tim Gover spake thusly: > On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > > If a custom os_prefix directory is specified then the Raspberry Pi > > > firmware probes for the README file in overlays directory. > > > Since the README file is small let's include it, otherwise, > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > > and accounts for ~25% of the size of all dtbo combined. > Good point. Would you be happy with simply creating an empty or small > README file (a note indicating the purpose of the file) ? Just touching the README should be enough I would say. > > > the firmware won't recognize the overlays directory if the user > > > later moves it to an os_prefix specific sub-directory. > > What is the goal here, in the context of Buildroot, where we only > > install one set of overlays? > > If a user moved the overlays, they already have a script that does that, > > so they should also ensure that script properly prepares config.txt to > > specify the proper os_prefix, and so it is just a matter of adding a > > 'touch' on the README in the same script. > It's fairly common for non-expert users to modify the output of a > buildroot image > without re-building the image themselves. Adding a README file reduces > the risk of them being tripped up by this difference in behaviour. So, if I read you correctly: non-expert users know they can move the overlays to a sub-dir; they also know they have to set the os_prefix accordingly in config.txt; but they don't know they have to create a README in there? ;-) Sorry, I am still unconvinced. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:55:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:55:10 +0100 Subject: [Buildroot] [git commit] package/docopt-cpp: fix comment header in .mk file Message-ID: <20221031140124.92F0287931@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2d5a94b742d5b21f480d299c319a58a5c989b382 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This was missed in commit 43f96ced67c9a1f84d3f0edf5cd632178eb176b8 ("package/docopt-cpp: new package") Signed-off-by: Thomas Petazzoni --- package/docopt-cpp/docopt-cpp.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/docopt-cpp/docopt-cpp.mk b/package/docopt-cpp/docopt-cpp.mk index d90b82820f..897b907822 100644 --- a/package/docopt-cpp/docopt-cpp.mk +++ b/package/docopt-cpp/docopt-cpp.mk @@ -1,6 +1,6 @@ ################################################################################ # -# docopt.cpp +# docopt-cpp # ################################################################################ From thomas.petazzoni at bootlin.com Mon Oct 31 14:00:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:00:58 +0100 Subject: [Buildroot] [git commit] package/umtprd: add patch to fix output_dir make dependency Message-ID: <20221031140306.4137387937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f1a357452d473e384f28a37d3e4ba4146519160 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Object file targets need to depend on the output_dir target. Upstream commit: https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ Signed-off-by: Paul Cercueil Signed-off-by: Thomas Petazzoni --- .../0001-Fix-output_dir-make-dependency.patch | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..fcbca6b000 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,46 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +[paul at crapouillou.net: Backport from upstream commit d84216a] +Signed-off-by: Paul Cercueil +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.35.1 + From yann.morin.1998 at free.fr Mon Oct 31 14:34:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 15:34:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build In-Reply-To: <20221030215458.3773991-1-james.hilliard1@gmail.com> References: <20221030215458.3773991-1-james.hilliard1@gmail.com> Message-ID: <20221031143423.GE1058960@scaer> James, All, On 2022-10-30 15:54 -0600, James Hilliard spake thusly: > Backport an upstream patch to fix a crash during kernel build. > > Details: https://bugs.gentoo.org/868567 > > Fixes: > GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c > free(): double free detected in tcache 2 > Aborted > > Signed-off-by: James Hilliard [--SNIP--] > +--- > + ChangeLog | 8 ++++++++ > + interpret.h | 1 + > + test/ChangeLog | 5 +++++ > + test/Makefile.am | 4 +++- > + test/Makefile.in | 9 ++++++++- As noticed by Romain, this triggers hidden autoreconf, which obviously fails most of the time. I noticed the issue when applying your patch this morning, but a build here did not trigger the silent autoreconf, and since Makefile.in is patched after Makefile.am, it seemed all was going to tbe OK. It did not: http://autobuild.buildroot.org/results/068/0686697cb52d22c42ae2249db3442c008082fe72/ http://autobuild.buildroot.org/results/754/75463639cb9cbc32108f059bd6044810a078db06/ So I dropped all the hunks about Makfile.am and Makefile .in, as they are only about tests, which we don't care much about, and while at it I also dropped the hunks about changelogs, which we really don't care much about either, and pushed that to master. Regards, Yann E. MORIN. > + test/Maketests | 5 +++++ > + test/elemnew1.awk | 9 +++++++++ > + test/elemnew1.ok | 0 > + 8 files changed, 39 insertions(+), 2 deletions(-) > + create mode 100644 test/elemnew1.awk > + create mode 100644 test/elemnew1.ok > + > +diff --git a/ChangeLog b/ChangeLog > +index 5fb25483..cd9d9fcd 100644 > +--- a/ChangeLog > ++++ b/ChangeLog > +@@ -1,3 +1,11 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * interpret.h (r_interpret): For the `push' opcodes, upref > ++ the Node_elem_new. See test case elemnew1. Thanks to > ++ Emanuel Attila Czirai for the report, > ++ and to Jan Alexander Steffens (heftig)" > ++ for the fix. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/interpret.h b/interpret.h > +index 57d060e6..268655b2 100644 > +--- a/interpret.h > ++++ b/interpret.h > +@@ -238,6 +238,7 @@ uninitialized_scalar: > + _("reference to uninitialized argument `%s'") : > + _("reference to uninitialized variable `%s'"), > + save_symbol->vname); > ++ UPREF(m); > + PUSH(m); > + break; > + > +diff --git a/test/ChangeLog b/test/ChangeLog > +index a73637bf..ea08edee 100644 > +--- a/test/ChangeLog > ++++ b/test/ChangeLog > +@@ -1,3 +1,8 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. > ++ * elemnew1.awk, elemnew1.ok: New files. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/test/Makefile.am b/test/Makefile.am > +index ab06974c..8a5c3c49 100644 > +--- a/test/Makefile.am > ++++ b/test/Makefile.am > +@@ -282,6 +282,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +diff --git a/test/Makefile.in b/test/Makefile.in > +index 834feb09..a4fb1cc1 100644 > +--- a/test/Makefile.in > ++++ b/test/Makefile.in > +@@ -550,6 +550,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +@@ -4476,6 +4478,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/Maketests b/test/Maketests > +index 3a667af8..90828e7f 100644 > +--- a/test/Maketests > ++++ b/test/Maketests > +@@ -1432,6 +1432,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/elemnew1.awk b/test/elemnew1.awk > +new file mode 100644 > +index 00000000..58dc9fcd > +--- /dev/null > ++++ b/test/elemnew1.awk > +@@ -0,0 +1,9 @@ > ++function add_flags(old) { > ++ if (old) > ++ return 0 > ++ if (!old) > ++ return 1 > ++} > ++BEGIN { > ++ a[0]=add_flags(a[0]) > ++} > +diff --git a/test/elemnew1.ok b/test/elemnew1.ok > +new file mode 100644 > +index 00000000..e69de29b > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 14:39:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:39:54 +0100 Subject: [Buildroot] [git commit] package/python-setuptools: bump to version 65.5.0 Message-ID: <20221031144042.0A8D987949@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d187743f3d80a7f3022f2559d5f5c7f8e0adc634 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-setuptools/python-setuptools.hash | 4 ++-- package/python-setuptools/python-setuptools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-setuptools/python-setuptools.hash b/package/python-setuptools/python-setuptools.hash index 3f68084068..2592fc201c 100644 --- a/package/python-setuptools/python-setuptools.hash +++ b/package/python-setuptools/python-setuptools.hash @@ -1,4 +1,4 @@ # From https://pypi.org/pypi/setuptools/json -md5 66c6b8819c5306c12c38d7fad41b7f99 setuptools-65.3.0.tar.gz -sha256 7732871f4f7fa58fb6bdcaeadb0161b2bd046c85905dbaa066bdcbcc81953b57 setuptools-65.3.0.tar.gz +md5 9018a18990e7c16159ec3972affba76c setuptools-65.5.0.tar.gz +sha256 512e5536220e38146176efb833d4a62aa726b7bbff82cfbc8ba9eaa3996e0b17 setuptools-65.5.0.tar.gz sha256 db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8 LICENSE diff --git a/package/python-setuptools/python-setuptools.mk b/package/python-setuptools/python-setuptools.mk index b7483c6347..9dc0a6a38b 100644 --- a/package/python-setuptools/python-setuptools.mk +++ b/package/python-setuptools/python-setuptools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_SETUPTOOLS_VERSION = 65.3.0 +PYTHON_SETUPTOOLS_VERSION = 65.5.0 PYTHON_SETUPTOOLS_SOURCE = setuptools-$(PYTHON_SETUPTOOLS_VERSION).tar.gz -PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/cc/83/7ea9d9b3a6ff3225aca2fce5e4df373bee7e0a74c539711a4fbfda53374f +PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/c5/41/247814d8b7a044717164c74080725a6c8f3d2b5fc82b34bd825b617df663 PYTHON_SETUPTOOLS_LICENSE = MIT PYTHON_SETUPTOOLS_LICENSE_FILES = LICENSE PYTHON_SETUPTOOLS_CPE_ID_VENDOR = python From yann.morin.1998 at free.fr Mon Oct 31 14:24:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 15:24:15 +0100 Subject: [Buildroot] [git commit] package/gawk: don't sliently try autoreconf Message-ID: <20221031144041.F21DA87948@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1227e4e7202adcb0b73760584bf8383aa65bc0cf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Commit e6942ad11ff0 (package/gawk: fix double free during kernel build) backported an upstream patch, with hunks in autotools files, Makefile.am and Makefile.in. Such changes ususally require an explicitly autoreconf, but in this case, Makefile.in is modified after Makefile,am, and a simple local test did not trigger a silent autoreconf, so the patch was applied as-is. That was a bit too optimitstic, though, and the build fails in some situations. Since the hunks in the autotools files are about tests, just drop those hunks as we are not interested in running the tests. Also drop the hunks about the changelogs while at it. Fixes: http://autobuild.buildroot.org/results/068/0686697cb52d22c42ae2249db3442c008082fe72/ http://autobuild.buildroot.org/results/754/75463639cb9cbc32108f059bd6044810a078db06/ Reported-by: Romain Naour Signed-off-by: Yann E. MORIN --- .../gawk/0002-Fix-a-bug-with-Node_elem_new.patch | 132 +-------------------- 1 file changed, 3 insertions(+), 129 deletions(-) diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch index 502f7dcd95..8cbe9c6d02 100644 --- a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -6,35 +6,12 @@ Subject: [PATCH] Fix a bug with Node_elem_new. Signed-off-by: James Hilliard [james.hilliard1 at gmail.com: backport from upstream commit baab183439ff4e0c6b77d62156d447e61fc1dcfb] +[yann.morin.1998 at free.fr: drop all hunks about tests and changelogs] +Signed-off-by: Yann E. MORIN --- - ChangeLog | 8 ++++++++ interpret.h | 1 + - test/ChangeLog | 5 +++++ - test/Makefile.am | 4 +++- - test/Makefile.in | 9 ++++++++- - test/Maketests | 5 +++++ - test/elemnew1.awk | 9 +++++++++ - test/elemnew1.ok | 0 - 8 files changed, 39 insertions(+), 2 deletions(-) - create mode 100644 test/elemnew1.awk - create mode 100644 test/elemnew1.ok + 1 files changed, 1 insertions(+), 0 deletions(-) -diff --git a/ChangeLog b/ChangeLog -index 5fb25483..cd9d9fcd 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,11 @@ -+2022-09-14 Arnold D. Robbins -+ -+ * interpret.h (r_interpret): For the `push' opcodes, upref -+ the Node_elem_new. See test case elemnew1. Thanks to -+ Emanuel Attila Czirai for the report, -+ and to Jan Alexander Steffens (heftig)" -+ for the fix. -+ - 2022-09-04 Arnold D. Robbins - - * 5.2.0: Release tar ball made. diff --git a/interpret.h b/interpret.h index 57d060e6..268655b2 100644 --- a/interpret.h @@ -47,109 +24,6 @@ index 57d060e6..268655b2 100644 PUSH(m); break; -diff --git a/test/ChangeLog b/test/ChangeLog -index a73637bf..ea08edee 100644 ---- a/test/ChangeLog -+++ b/test/ChangeLog -@@ -1,3 +1,8 @@ -+2022-09-14 Arnold D. Robbins -+ -+ * Makefile.am (EXTRA_DIST): New test: elemnew1. -+ * elemnew1.awk, elemnew1.ok: New files. -+ - 2022-09-04 Arnold D. Robbins - - * 5.2.0: Release tar ball made. -diff --git a/test/Makefile.am b/test/Makefile.am -index ab06974c..8a5c3c49 100644 ---- a/test/Makefile.am -+++ b/test/Makefile.am -@@ -282,6 +282,8 @@ EXTRA_DIST = \ - dumpvars.ok \ - dynlj.awk \ - dynlj.ok \ -+ elemnew1.awk \ -+ elemnew1.ok \ - escapebrace.awk \ - escapebrace.in \ - escapebrace.ok \ -@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ - binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ - clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ - dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ -- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ -+ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ - fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ - functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ - fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ -diff --git a/test/Makefile.in b/test/Makefile.in -index 834feb09..a4fb1cc1 100644 ---- a/test/Makefile.in -+++ b/test/Makefile.in -@@ -550,6 +550,8 @@ EXTRA_DIST = \ - dumpvars.ok \ - dynlj.awk \ - dynlj.ok \ -+ elemnew1.awk \ -+ elemnew1.ok \ - escapebrace.awk \ - escapebrace.in \ - escapebrace.ok \ -@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ - binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ - clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ - dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ -- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ -+ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ - fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ - functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ - fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ -@@ -4476,6 +4478,11 @@ dfacheck1: - @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ - @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ - -+elemnew1: -+ @echo $@ -+ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -+ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ -+ - exit: - @echo $@ - @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -diff --git a/test/Maketests b/test/Maketests -index 3a667af8..90828e7f 100644 ---- a/test/Maketests -+++ b/test/Maketests -@@ -1432,6 +1432,11 @@ dfacheck1: - @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ - @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ - -+elemnew1: -+ @echo $@ -+ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -+ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ -+ - exit: - @echo $@ - @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -diff --git a/test/elemnew1.awk b/test/elemnew1.awk -new file mode 100644 -index 00000000..58dc9fcd ---- /dev/null -+++ b/test/elemnew1.awk -@@ -0,0 +1,9 @@ -+function add_flags(old) { -+ if (old) -+ return 0 -+ if (!old) -+ return 1 -+} -+BEGIN { -+ a[0]=add_flags(a[0]) -+} -diff --git a/test/elemnew1.ok b/test/elemnew1.ok -new file mode 100644 -index 00000000..e69de29b -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 31 14:14:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:14:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/umtprd: add patch to fix output_dir make dependency In-Reply-To: <20221018110157.35331-1-paul@crapouillou.net> References: <20221018110157.35331-1-paul@crapouillou.net> Message-ID: <20221031151436.328c576c@windsurf> On Tue, 18 Oct 2022 12:01:57 +0100 Paul Cercueil wrote: > Object file targets need to depend on the output_dir target. > > Upstream commit: > https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 > > Fixes: > - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ > - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ > - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ > - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ > - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ > - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ > > Signed-off-by: Paul Cercueil > --- > .../0001-Fix-output_dir-make-dependency.patch | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:42:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:42:12 +0100 Subject: [Buildroot] [git commit] package/lua-lyaml: bump to version 6.2.8 Message-ID: <20221031144227.55C7D87968@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce2b819d74465dc9720eeb8e5f18d789b5d2915f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master diff LICENCE: -Copyright (C) 2013-2020 Gary V. Vaughan +Copyright (C) 2013-2022 Gary V. Vaughan Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/lua-lyaml/lua-lyaml.hash | 4 ++-- package/lua-lyaml/lua-lyaml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lua-lyaml/lua-lyaml.hash b/package/lua-lyaml/lua-lyaml.hash index af3d0ae6da..a8599bc3dd 100644 --- a/package/lua-lyaml/lua-lyaml.hash +++ b/package/lua-lyaml/lua-lyaml.hash @@ -1,3 +1,3 @@ # locally computed -sha256 9bb489cefae48b150d66f6bab4141d8d5831fcb7465bfc52a9845fa01efc63b0 lua-lyaml-6.2.7.tar.gz -sha256 81e4ea1d897e259b31111adc2d3c185fe23e435942ff3e9de8c8c9c5d01247d0 LICENSE +sha256 c6169f516ff2a8da96d55aa3a087e718edf7bceb2f1cae2def4e65cd2b41ac2d lua-lyaml-6.2.8.tar.gz +sha256 796d267e51d61652c55694d21108e7352e98b1ed489ab7516acc07102157e08d LICENSE diff --git a/package/lua-lyaml/lua-lyaml.mk b/package/lua-lyaml/lua-lyaml.mk index 77980f5312..00a868ec29 100644 --- a/package/lua-lyaml/lua-lyaml.mk +++ b/package/lua-lyaml/lua-lyaml.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUA_LYAML_VERSION = 6.2.7 +LUA_LYAML_VERSION = 6.2.8 LUA_LYAML_NAME_UPSTREAM = lyaml LUA_LYAML_SITE = $(call github,gvvaughan,$(LUA_LYAML_NAME_UPSTREAM),v$(LUA_LYAML_VERSION)) LUA_LYAML_LICENSE = MIT From thomas.petazzoni at bootlin.com Mon Oct 31 14:41:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:41:31 +0100 Subject: [Buildroot] [git commit] package/valijson: bump to version 0.7 Message-ID: <20221031144227.3524787965@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d264b6e81e1a03c36df55c66771ed26dd767a522 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/tristanpenman/valijson/releases/tag/v0.7 Signed-off-by: Fabrice Fontaine Reviewed-by: Eero Aaltonen Tested-by: Eero Aaltonen Signed-off-by: Thomas Petazzoni --- package/valijson/valijson.hash | 2 +- package/valijson/valijson.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/valijson/valijson.hash b/package/valijson/valijson.hash index 0aab93dd2a..aacdf7dedc 100644 --- a/package/valijson/valijson.hash +++ b/package/valijson/valijson.hash @@ -1,3 +1,3 @@ # Locally Computed: -sha256 e06bf78fc1d26d4956fabc182408ebbbc47e3a6699778cda4aa439c2a6110b09 valijson-0.6.tar.gz +sha256 bc24736709acfb252a5fdcb5145f1f2670c7aecaba3356f6f8ba54903800fa5c valijson-0.7.tar.gz sha256 1a0f99926a2dbec30eba3db820236d9953fbe3048976923ac24980e655fbe991 LICENSE diff --git a/package/valijson/valijson.mk b/package/valijson/valijson.mk index 4b1f722f77..51a9353960 100644 --- a/package/valijson/valijson.mk +++ b/package/valijson/valijson.mk @@ -4,7 +4,7 @@ # ################################################################################ -VALIJSON_VERSION = 0.6 +VALIJSON_VERSION = 0.7 VALIJSON_SITE = $(call github,tristanpenman,valijson,v$(VALIJSON_VERSION)) VALIJSON_LICENSE = BSD-2-Clause VALIJSON_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Mon Oct 31 14:42:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:42:06 +0100 Subject: [Buildroot] [git commit] package/casync: bump to latest git commit (0efa7abffe5f) Message-ID: <20221031144227.4A5B987967@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b55d1e9c1549ef7f53c9cf42e8cd73745063fdfe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches (merged to main) Signed-off-by: Yair Ben-Avraham Signed-off-by: Thomas Petazzoni --- ...0001-castore-fix-build-without-lzma-or-xz.patch | 35 -------------- ...t-install-udev-rules-without-udev-support.patch | 53 ---------------------- package/casync/casync.hash | 2 +- package/casync/casync.mk | 2 +- 4 files changed, 2 insertions(+), 90 deletions(-) diff --git a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch b/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch deleted file mode 100644 index a528b1244c..0000000000 --- a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 06b667de02df34e3efa1864b4031853bd4ee010d Mon Sep 17 00:00:00 2001 -From: Yair Ben-Avraham -Date: Sun, 10 Jan 2021 06:34:58 +0100 -Subject: [PATCH] castore: fix build without lzma or xz - -castore.c unconditioanlly includes lzma.h, but lzma support if optional. -Furthermore, castore.c does not need anything from lzma.h. - -Drop the include altogether. - -Signed-off-by: Yair Ben-Avraham -[yann.morin.1998 at free.fr: - - lzma.h is not needed at all - - rewrite commit log accordingly -] -Signed-off-by: Yann E. MORIN ---- - src/castore.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/src/castore.c b/src/castore.c -index c290dfd..b2e5320 100644 ---- a/src/castore.c -+++ b/src/castore.c -@@ -2,7 +2,6 @@ - - #include - #include --#include - #include - #include - --- -2.25.1 - diff --git a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch b/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch deleted file mode 100644 index 838b065571..0000000000 --- a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e3f683dc3013d14bddb9f9ec5bdc31367dc51a1c Mon Sep 17 00:00:00 2001 -From: "Yann E. MORIN" -Date: Sun, 10 Jan 2021 10:44:39 +0100 -Subject: [PATCH] build: don't install udev rules without udev support - -Signed-off-by: Yann E. MORIN ---- - meson.build | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -diff --git a/meson.build b/meson.build -index aac7727..92be1ea 100644 ---- a/meson.build -+++ b/meson.build -@@ -151,6 +151,11 @@ conf.set10('HAVE_SELINUX', get_option('selinux')) - - if get_option('udev') - libudev = dependency('libudev') -+ udevrulesdir = get_option('udevrulesdir') -+ if udevrulesdir == '' -+ udev = dependency('udev', required : false) -+ udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') -+ endif - else - libudev = [] - endif -@@ -175,12 +180,6 @@ subdir('test') - - includes = include_directories('src') - --udevrulesdir = get_option('udevrulesdir') --if udevrulesdir == '' -- udev = dependency('udev', required : false) -- udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') --endif -- - subdir('shell-completion/bash') - subdir('doc') - -@@ -318,7 +317,9 @@ udev_rule = configure_file( - input : 'src/75-casync.rules.in', - configuration : substs) - --install_data(udev_rule, install_dir : udevrulesdir) -+if get_option('udev') -+ install_data(udev_rule, install_dir : udevrulesdir) -+endif - - ############################################################ - --- -2.25.1 - diff --git a/package/casync/casync.hash b/package/casync/casync.hash index dbb85520de..469beb5b6c 100644 --- a/package/casync/casync.hash +++ b/package/casync/casync.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 d07f43e70e3c466152033da4c55c065f815d3025234a046c2bce1cfe4ac7d273 casync-4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc.tar.gz +sha256 5d58def4c5ca902b35a97178d4619b9298a35b27d5748a2cc346bd36c2e38e9c casync-0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/casync/casync.mk b/package/casync/casync.mk index bb9bd8ccac..af010a7ece 100644 --- a/package/casync/casync.mk +++ b/package/casync/casync.mk @@ -4,7 +4,7 @@ # ################################################################################ -CASYNC_VERSION = 4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc +CASYNC_VERSION = 0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f CASYNC_SITE = $(call github,systemd,casync,$(CASYNC_VERSION)) CASYNC_LICENSE = LGPL-2.1+ CASYNC_LICENSE_FILES = LICENSE.LGPL2.1 From thomas.petazzoni at bootlin.com Mon Oct 31 14:41:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:41:55 +0100 Subject: [Buildroot] [git commit] package/stress: bump to version 1.0.5 Message-ID: <20221031144227.3F2A487947@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4022f5fe44a928c5e987f40fd4f58dd0ae5cf1fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to an active fork: "The original stress went unmaintained; the source of the last version, 1.0.4, was imported from Debian. After, patches from Debian and other changes were applied to create the 1.0.5 release. The details of each release are registered in the ChangeLog file. Now, stress is maintained by volunteers under Resurrecting Open Source Projects." https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/stress/Config.in | 2 +- package/stress/stress.hash | 3 +-- package/stress/stress.mk | 6 ++++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/package/stress/Config.in b/package/stress/Config.in index b22c3f19bb..32a3e264bc 100644 --- a/package/stress/Config.in +++ b/package/stress/Config.in @@ -6,4 +6,4 @@ config BR2_PACKAGE_STRESS It imposes a configurable amount of CPU, memory, I/O, and disk stress on the system. - http://people.seas.harvard.edu/~apw/stress/ + https://github.com/resurrecting-open-source-projects/stress/ diff --git a/package/stress/stress.hash b/package/stress/stress.hash index 8d14d053fb..dc1785b6c7 100644 --- a/package/stress/stress.hash +++ b/package/stress/stress.hash @@ -1,4 +1,3 @@ -# Locally calculated after checking pgp signature -sha256 057e4fc2a7706411e1014bf172e4f94b63a12f18412378fca8684ca92408825b stress-1.0.4.tar.gz # Locally computed +sha256 1798e49ca365d928fb194ba1b8e8d1e09963b49e9edb0a78bcbba15750bb5027 stress-1.0.5.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/stress/stress.mk b/package/stress/stress.mk index 4d2d4cb838..99a50f349e 100644 --- a/package/stress/stress.mk +++ b/package/stress/stress.mk @@ -4,10 +4,12 @@ # ################################################################################ -STRESS_VERSION = 1.0.4 -STRESS_SITE = http://people.seas.harvard.edu/~apw/stress +STRESS_VERSION = 1.0.5 +STRESS_SITE = $(call github,resurrecting-open-source-projects,stress,$(STRESS_VERSION)) STRESS_LICENSE = GPL-2.0+ STRESS_LICENSE_FILES = COPYING +# From git +STRESS_AUTORECONF = YES # Stress is linked statically if the --enable-static is specified. # However, this option is always specified in the global From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:08 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-setuptools: bump to version 65.5.0 In-Reply-To: <20221019194613.145290-1-james.hilliard1@gmail.com> References: <20221019194613.145290-1-james.hilliard1@gmail.com> Message-ID: <20221031154308.7f627e75@windsurf> On Wed, 19 Oct 2022 13:46:13 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-setuptools/python-setuptools.hash | 4 ++-- > package/python-setuptools/python-setuptools.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/valijson: bump to version 0.7 In-Reply-To: <20221022204144.137169-1-fontaine.fabrice@gmail.com> References: <20221022204144.137169-1-fontaine.fabrice@gmail.com> Message-ID: <20221031154319.5b6cb293@windsurf> On Sat, 22 Oct 2022 22:41:44 +0200 Fabrice Fontaine wrote: > https://github.com/tristanpenman/valijson/releases/tag/v0.7 > > Signed-off-by: Fabrice Fontaine > --- > package/valijson/valijson.hash | 2 +- > package/valijson/valijson.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/stress: bump to version 1.0.5 In-Reply-To: <20221022211858.166130-1-fontaine.fabrice@gmail.com> References: <20221022211858.166130-1-fontaine.fabrice@gmail.com> Message-ID: <20221031154328.36373f6b@windsurf> On Sat, 22 Oct 2022 23:18:58 +0200 Fabrice Fontaine wrote: > Switch to an active fork: > > "The original stress went unmaintained; the source of the last version, > 1.0.4, was imported from Debian. After, patches from Debian and other > changes were applied to create the 1.0.5 release. The details of each > release are registered in the ChangeLog file. Now, stress is maintained > by volunteers under Resurrecting Open Source Projects." > > https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/stress/Config.in | 2 +- > package/stress/stress.hash | 3 +-- > package/stress/stress.mk | 6 ++++-- > 3 files changed, 6 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/casync: bump to latest git commit (0efa7abffe5f) In-Reply-To: References: Message-ID: <20221031154336.054f589b@windsurf> On Sun, 23 Oct 2022 07:04:28 +0000 Yair Ben-Avraham via buildroot wrote: > Drop patches (merged to main) > > Signed-off-by: Yair Ben-Avraham > --- > ...castore-fix-build-without-lzma-or-xz.patch | 35 ------------ > ...tall-udev-rules-without-udev-support.patch | 53 ------------------- > package/casync/casync.hash | 2 +- > package/casync/casync.mk | 2 +- > 4 files changed, 2 insertions(+), 90 deletions(-) > delete mode 100644 package/casync/0001-castore-fix-build-without-lzma-or-xz.patch > delete mode 100644 package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:46 +0100 Subject: [Buildroot] [PATCH] package/lua-lyaml: bump to version 6.2.8 In-Reply-To: <20221023071946.433502-1-francois.perrad@gadz.org> References: <20221023071946.433502-1-francois.perrad@gadz.org> Message-ID: <20221031154346.0b854452@windsurf> On Sun, 23 Oct 2022 09:19:46 +0200 Francois Perrad wrote: > diff LICENCE: > -Copyright (C) 2013-2020 Gary V. Vaughan > +Copyright (C) 2013-2022 Gary V. Vaughan > > Signed-off-by: Francois Perrad > --- > package/lua-lyaml/lua-lyaml.hash | 4 ++-- > package/lua-lyaml/lua-lyaml.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From tim.gover at raspberrypi.com Mon Oct 31 15:02:01 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 15:02:01 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031131444.GD1058960@scaer> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> <20221031131444.GD1058960@scaer> Message-ID: On Mon, 31 Oct 2022 at 13:14, Yann E. MORIN wrote: > > Tim, All, > > On 2022-10-31 12:52 +0000, Tim Gover spake thusly: > > On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > > > If a custom os_prefix directory is specified then the Raspberry Pi > > > > firmware probes for the README file in overlays directory. > > > > Since the README file is small let's include it, otherwise, > > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > > > and accounts for ~25% of the size of all dtbo combined. > > Good point. Would you be happy with simply creating an empty or small > > README file (a note indicating the purpose of the file) ? > > Just touching the README should be enough I would say. > > > > > the firmware won't recognize the overlays directory if the user > > > > later moves it to an os_prefix specific sub-directory. > > > What is the goal here, in the context of Buildroot, where we only > > > install one set of overlays? > > > If a user moved the overlays, they already have a script that does that, > > > so they should also ensure that script properly prepares config.txt to > > > specify the proper os_prefix, and so it is just a matter of adding a > > > 'touch' on the README in the same script. > > It's fairly common for non-expert users to modify the output of a > > buildroot image > > without re-building the image themselves. Adding a README file reduces > > the risk of them being tripped up by this difference in behaviour. > > So, if I read you correctly: non-expert users know they can move the > overlays to a sub-dir; they also know they have to set the os_prefix > accordingly in config.txt; but they don't know they have to create a > README in there? ;-) We've found that many industrial customers prototype their software on Raspberry Pi OS before using Buildroot or Yocto to create a dedicated OS image. Using os_prefix + a GPIO conditional is a common pattern and it would be nice if this worked as easily on buildroot as elsewhere. I've resubmitted the patch with a zero byte README. If anyone wants to create a really small image then they would remove unused .dtbo files or just have a fixed DTB. Therefore, I think the overhead of having a single empty README file should be acceptable. > > Sorry, I am still unconvinced. > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From tim.gover at raspberrypi.com Mon Oct 31 15:02:35 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 15:02:35 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README Message-ID: <20221031150235.12074-1-tim.gover@raspberrypi.com> If a custom os_prefix directory is specified then the Raspberry Pi firmware probes for the README file in overlays directory. If this is not found then firmware will use the top-level overlays directory which can be confusing if os_prefix is used in conjunction with other filters to implement alternate boot behaviour. In Raspberry Pi OS the README file is always included to ensure that the relevant documenation is in sync with the overlays. Rather that including the entire file let's just include an emtpy file so that overlays directory is consistent with the Raspberry Pi OS APT package. From https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared with the main OS (i.e. os_prefix is ignored). Signed-off-by: Tim Gover --- package/rpi-firmware/rpi-firmware.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index 6f5902fd52..53d6d8ca06 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -57,6 +57,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) ) $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ + touch $(BINARIES_DIR)/rpi-firmware/overlays/README endef else # Still create the directory, so a genimage.cfg can include it independently of -- 2.25.1 From james.hilliard1 at gmail.com Mon Oct 31 16:14:51 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 10:14:51 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: fix D-Bus bus services directory error Message-ID: <20221031161451.2604400-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, however we still need it when building with systemd so that the service directory is available via pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- Changes v1 -> v2: - depend on dbus when depending on systemd --- package/iwd/iwd.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..6e366e094d 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -31,7 +31,8 @@ endif ifeq ($(BR2_PACKAGE_SYSTEMD),y) IWD_CONF_OPTS += --enable-systemd-service -IWD_DEPENDENCIES += systemd +# Need dbus for system_bus_services_dir variable provided by dbus' .pc +IWD_DEPENDENCIES += dbus systemd else IWD_CONF_OPTS += --disable-systemd-service endif -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 16:15:38 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 12:15:38 -0400 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir In-Reply-To: <20221031081735.GK1058960@scaer> References: <20221031010904.1109541-1-james.hilliard1@gmail.com> <20221031081735.GK1058960@scaer> Message-ID: On Mon, Oct 31, 2022 at 4:17 AM Yann E. MORIN wrote: > > James, All, > > +Daniel > > On 2022-10-30 19:09 -0600, James Hilliard spake thusly: > > In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build > > dependency, as such we also need to set --with-dbus-busdir which would > > otherwise be pulled via pkg-config. > > > > Fixes: > > checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required > > I was surprised that I did not have this error locally, but it only > happens when systemd is enabled. > > So, rather than hard-code the path, I think I would prefer we add back a > buid dependency on dbus when systemd is enabled: > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 002988cf33..6e366e094d 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -31,7 +31,8 @@ endif > > ifeq ($(BR2_PACKAGE_SYSTEMD),y) > IWD_CONF_OPTS += --enable-systemd-service > -IWD_DEPENDENCIES += systemd > +# Need dbus for system_bus_services_dir variable provided by dbus' .pc > +IWD_DEPENDENCIES += dbus systemd > else > IWD_CONF_OPTS += --disable-systemd-service > endif Sent as suggested in v2 patch: https://patchwork.ozlabs.org/project/buildroot/patch/20221031161451.2604400-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > > Signed-off-by: James Hilliard > > --- > > package/iwd/iwd.mk | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > > index 002988cf33..e53ae595d7 100644 > > --- a/package/iwd/iwd.mk > > +++ b/package/iwd/iwd.mk > > @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ > > --disable-manual-pages \ > > --enable-external-ell \ > > --enable-dbus-policy \ > > - --with-dbus-datadir=/usr/share > > + --with-dbus-datadir=/usr/share \ > > + --with-dbus-busdir=/usr/share/dbus-1/system-services > > IWD_DEPENDENCIES = ell > > > > ifeq ($(BR2_PACKAGE_READLINE),y) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 17:30:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 18:30:22 +0100 Subject: [Buildroot] defconfig fragments In-Reply-To: References: Message-ID: <20221031183022.5c51b20b@windsurf> Hello Bassem, On Sun, 23 Oct 2022 08:04:01 +0000 Bassem Fahmy wrote: > I understand that buildroot supports config fragments for packages (that support defconfig). > > But to patch the buildroot defconfig itself, the only way I could do it, is by calling > > support/kconfig/merge_config.h xxxx_defconfig xxxx.config > > Is this the correct way? Is there a more standard way to patch a buildroot defconfig? You're correct, that's the proper way of generating a Buildroot .config from multiple fragments. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 17:31:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 18:31:06 +0100 Subject: [Buildroot] [git commit] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221031173135.937578796F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=73890799ee14cba1ae650f19ec7a6e4fd2dd4086 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch 0001 as it is not needed anymore: https://github.com/cenobites/flask-jsonrpc/commit/2426b7f6fabeef9eb3a8dc6570e2fce33a30f98e Signed-off-by: S??bastien Szymanski Signed-off-by: Thomas Petazzoni --- .../0001-Move-pytest-runner-to-tests_require.patch | 32 ---------------------- .../python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 +-- .../python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 +-- 3 files changed, 4 insertions(+), 36 deletions(-) diff --git a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch b/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch deleted file mode 100644 index 8b6712e601..0000000000 --- a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 8f07768085fa4c8d21dbe27805b7238e67d3aea5 Mon Sep 17 00:00:00 2001 -From: James Hilliard -Date: Tue, 17 May 2022 15:52:58 -0600 -Subject: [PATCH] Move pytest-runner to tests_require - -This isn't a build requirement so it shouldn't be under -setup_requires. - -Signed-off-by: James Hilliard -[Upstream status: -https://github.com/cenobites/flask-jsonrpc/pull/227] ---- - setup.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 197d6c9..f23c472 100755 ---- a/setup.py -+++ b/setup.py -@@ -42,8 +42,8 @@ setuptools.setup( - 'async': ['Flask[async]>=1.0.0,<3.0'], - 'dotenv': ['Flask[dotenv]>=1.0.0,<3.0'], - }, -- setup_requires=['pytest-runner'], - tests_require=[ -+ 'pytest-runner', - 'mock==4.0.3', - 'coverage==6.3.2;python_version>"3.6"', - 'coverage<6.2;python_version<="3.6"', --- -2.36.0 - diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools From troglobit at gmail.com Mon Oct 31 17:46:29 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:29 +0100 Subject: [Buildroot] [PATCH 0/3] package/ssdp-responder bump and check-package fixes Message-ID: <20221031174632.377586-1-troglobit@gmail.com> Hi, here's the upgrade of the ssdpd-responder package to the latest release, as of yesterday. Also included are some stilistic fixes to Config.in and the start script. The latter changes suggested by check-package and shellcheck, fixes based in part on the SMCRoute start script. Best regards /Joachim From troglobit at gmail.com Mon Oct 31 17:46:30 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:30 +0100 Subject: [Buildroot] [PATCH 1/3] package/ssdp-responder: bump to version 1.9 In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-2-troglobit@gmail.com> Changes: - New command line options to ssdp-scan - Update copyright years (affects LICENSE file hash) Fixes: - Workaround for OpenVPN /32 default server setup - Time-of-check vs time-of-use issue with caching of UUID, found by Coverity Scan, fixed by Raul Porancea Signed-off-by: Joachim Wiberg --- package/ssdp-responder/ssdp-responder.hash | 4 ++-- package/ssdp-responder/ssdp-responder.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/ssdp-responder/ssdp-responder.hash b/package/ssdp-responder/ssdp-responder.hash index e8cbbb4a1f..425ad86e08 100644 --- a/package/ssdp-responder/ssdp-responder.hash +++ b/package/ssdp-responder/ssdp-responder.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7ae49229e7c7a55fed9e36598b12e2173eecef0fffe0a386b6a10fad30f3c79f ssdp-responder-1.8.tar.gz -sha256 e17dc0bc91bf499d8cca5e016c22c6d2a4770e3cc1a43756a7973375a83ddb90 LICENSE +sha256 974c244abd4ba8c87532867a84756182a1460c99072ffb1eb91c5a1f73311d89 ssdp-responder-1.9.tar.gz +sha256 68d6fdc22e337f725fe719bf9ae6d92b1d8d0ca4cff8219b303ab76706670a8d LICENSE diff --git a/package/ssdp-responder/ssdp-responder.mk b/package/ssdp-responder/ssdp-responder.mk index 3fee4c2006..fd7b1ea44b 100644 --- a/package/ssdp-responder/ssdp-responder.mk +++ b/package/ssdp-responder/ssdp-responder.mk @@ -4,7 +4,7 @@ # ################################################################################ -SSDP_RESPONDER_VERSION = 1.8 +SSDP_RESPONDER_VERSION = 1.9 SSDP_RESPONDER_SITE = https://github.com/troglobit/ssdp-responder/releases/download/v$(SSDP_RESPONDER_VERSION) SSDP_RESPONDER_LICENSE = ISC SSDP_RESPONDER_LICENSE_FILES = LICENSE -- 2.34.1 From troglobit at gmail.com Mon Oct 31 17:46:31 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:31 +0100 Subject: [Buildroot] [PATCH 2/3] package/ssdp-responder: minor update of help text In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-3-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/ssdp-responder/Config.in | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/package/ssdp-responder/Config.in b/package/ssdp-responder/Config.in index df57546eed..8b5dfe67a6 100644 --- a/package/ssdp-responder/Config.in +++ b/package/ssdp-responder/Config.in @@ -7,14 +7,16 @@ config BR2_PACKAGE_SSDP_RESPONDER targeted more at embedded systems that need to announce themselves to Windows systems. - ssdpd is a stand-alone UNIX, no external dependencies but the - standard C library. It has a built-in web server for serving - the UPnP XML description which Windows use to present the - icon, by default an InternetGatewayDevice is announced. + The project consists of ssdpd and ssdp-scan. The former is a + stand-alone UNIX daemon, it has no dependencies but a standard + C library. It comes with built-in web server for serving the + UPnP XML description on port 1901, the XML is used by Windows + to present the icon, by default an InternetGatewayDevice is + announced. - Also included is ssdp-scan, a tool similar to mdns-scan, which - continuously scans for SSDP capable hosts on the network. - Take care only to use for debugging since it scans the network - quite aggressively. + ssdp-scan is a tool, similar to mdns-scan, to find other SSDP + capable hosts on the network. Take care to only use it for + debugging, or quicker device discovery operations, since it + scans the network quite aggressively. https://github.com/troglobit/ssdp-responder/ -- 2.34.1 From troglobit at gmail.com Mon Oct 31 17:46:32 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:32 +0100 Subject: [Buildroot] [PATCH 3/3] package/ssdp-responder: fix warnings from check-package and shellcheck In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-4-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/ssdp-responder/S50ssdpd | 47 +++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 20 deletions(-) mode change 100755 => 100644 package/ssdp-responder/S50ssdpd diff --git a/package/ssdp-responder/S50ssdpd b/package/ssdp-responder/S50ssdpd old mode 100755 new mode 100644 index e33992be91..6874fdbb70 --- a/package/ssdp-responder/S50ssdpd +++ b/package/ssdp-responder/S50ssdpd @@ -1,25 +1,32 @@ #!/bin/sh -NAME=ssdpd -PIDFILE=/var/run/$NAME.pid -DAEMON=/usr/sbin/$NAME -CFGFILE=/etc/default/$NAME +DAEMON=ssdpd +PIDFILE=/var/run/$DAEMON.pid +CFGFILE=/etc/default/$DAEMON DAEMON_ARGS="" # Read configuration variable file if it is present -[ -f $CFGFILE ] && . $CFGFILE +# shellcheck source=/dev/null +[ -r "$CFGFILE" ] && . "$CFGFILE" + +cmd() +{ + start-stop-daemon -q -p "$PIDFILE" -x "$DAEMON" "$@" + status=$? + [ $status -eq 0 ] && echo "OK" || echo "FAIL" + + return $status +} start() { - printf 'Starting %s: ' "$NAME" - start-stop-daemon -S -q -p $PIDFILE -x $DAEMON -- $DAEMON_ARGS - [ $? = 0 ] && echo "OK" || echo "FAIL" + printf 'Starting %s: ' "$DAEMON" + cmd -S -- "$DAEMON_ARGS" } stop() { - printf 'Stopping %s: ' "$NAME" - start-stop-daemon -K -q -p $PIDFILE -x $DAEMON - [ $? = 0 ] && echo "OK" || echo "FAIL" + printf 'Stopping %s: ' "$DAEMON" + cmd -K } restart() { @@ -28,15 +35,15 @@ restart() { } case "$1" in - start|stop|restart) - "$1" - ;; - reload) - restart - ;; - *) - echo "Usage: $0 {start|stop|restart|reload}" - exit 1 + start|stop|restart) + "$1" + ;; + reload) + restart + ;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 esac exit $? -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 17:49:59 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 11:49:59 -0600 Subject: [Buildroot] [PATCH v3 1/1] package/iwd: add dbus compile time dependency Message-ID: <20221031174959.604094-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, however we still need it when building with systemd so that the service directory is available via pkg-config. In addition we can drop --with-dbus-datadir by unconditionally requiring dbus as the datadir will then be fetched from pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- Changes v2 -> v3: - always depend on dbus Changes v1 -> v2: - depend on dbus when depending on systemd --- package/iwd/iwd.mk | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..5ffbde334e 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -16,9 +16,8 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ --enable-external-ell \ - --enable-dbus-policy \ - --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES = ell + --enable-dbus-policy +IWD_DEPENDENCIES = dbus ell ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 18:08:31 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 14:08:31 -0400 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build In-Reply-To: <20221030202718.GG1058960@scaer> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> <20221030202718.GG1058960@scaer> Message-ID: On Sun, Oct 30, 2022 at 4:27 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-19 15:53 -0600, James Hilliard spake thusly: > > This will be needed for the upcoming host-python-hatchling. > > > > Signed-off-by: James Hilliard > > Whole series applied to master, thanks. > > I really wonder how many pep517 buildsystems there will be, and how many > packages we'll have to introduce... Fantastic... Considering pep517 seems to have been designed to make it easy for everyone to write their own pep517 build backends...could be quite a few...yeah... > > Regards, > Yann E. MORIN. > > > --- > > package/python-pluggy/python-pluggy.mk | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk > > index 59382518ed..6dc6f970ea 100644 > > --- a/package/python-pluggy/python-pluggy.mk > > +++ b/package/python-pluggy/python-pluggy.mk > > @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools > > PYTHON_PLUGGY_LICENSE = MIT > > PYTHON_PLUGGY_LICENSE_FILES = LICENSE > > PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > > > $(eval $(python-package)) > > +$(eval $(host-python-package)) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Mon Oct 31 18:25:16 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:16 +0100 Subject: [Buildroot] [PATCH 2/3] package/monero: new package In-Reply-To: <20221031182517.263500-1-bernd.kuhls@t-online.de> References: <20221031182517.263500-1-bernd.kuhls@t-online.de> Message-ID: <20221031182517.263500-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + package/Config.in | 1 + .../monero/0001-disable-stack-protector.patch | 22 ++++ package/monero/0002-system-miniupnpc.patch | 112 ++++++++++++++++++ ...lation-and-JIT-support-on-aarch64_be.patch | 28 +++++ package/monero/Config.in | 35 ++++++ package/monero/monero.hash | 3 + package/monero/monero.mk | 55 +++++++++ 8 files changed, 257 insertions(+) create mode 100644 package/monero/0001-disable-stack-protector.patch create mode 100644 package/monero/0002-system-miniupnpc.patch create mode 100644 package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch create mode 100644 package/monero/Config.in create mode 100644 package/monero/monero.hash create mode 100644 package/monero/monero.mk diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..7db7954871 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -407,6 +407,7 @@ F: package/libyuv/ F: package/mesa3d/ F: package/minidlna/ F: package/mjpg-streamer/ +F: package/monero/ F: package/nut/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ diff --git a/package/Config.in b/package/Config.in index fff8186351..ac811bf2e4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2179,6 +2179,7 @@ menu "Miscellaneous" source "package/haveged/Config.in" source "package/linux-syscall-support/Config.in" source "package/mobile-broadband-provider-info/Config.in" + source "package/monero/Config.in" source "package/netdata/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" diff --git a/package/monero/0001-disable-stack-protector.patch b/package/monero/0001-disable-stack-protector.patch new file mode 100644 index 0000000000..0407b4e32d --- /dev/null +++ b/package/monero/0001-disable-stack-protector.patch @@ -0,0 +1,22 @@ +Disable unconditional stack-protector support + +Signed-off-by: Bernd Kuhls + +diff -uNr monero-source-v0.18.1.0.orig/CMakeLists.txt monero-source-v0.18.1.0/CMakeLists.txt +--- monero-source-v0.18.1.0.orig/CMakeLists.txt 2022-08-10 05:34:23.000000000 +0200 ++++ monero-source-v0.18.1.0/CMakeLists.txt 2022-08-15 18:40:52.240699837 +0200 +@@ -831,14 +831,6 @@ + add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS) + add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS) + +- # -fstack-protector +- if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) +- add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS) +- add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS) +- endif() +- + # New in GCC 8.2 + if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) + add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS) diff --git a/package/monero/0002-system-miniupnpc.patch b/package/monero/0002-system-miniupnpc.patch new file mode 100644 index 0000000000..e12d9302bd --- /dev/null +++ b/package/monero/0002-system-miniupnpc.patch @@ -0,0 +1,112 @@ +Add support for miniupnpc system library + +Downloaded from +https://git.alpinelinux.org/aports/plain/community/monero/system-miniupnpc.patch + +Signed-off-by: Bernd Kuhls + +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -676,6 +676,14 @@ + include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations") + add_subdirectory(external) + ++# Final setup for miniupnpc ++if(UPNP_STATIC OR IOS) ++ add_definitions("-DUPNP_STATIC") ++else() ++ add_definitions("-DUPNP_DYNAMIC") ++ include_directories(${UPNP_INCLUDE}) ++endif() ++ + # Final setup for libunbound + include_directories(${UNBOUND_INCLUDE_DIR}) + +diff --git a/src/p2p/net_node.inl b/src/p2p/net_node.inl +index 9b21705e..76340a22 100644 +--- a/src/p2p/net_node.inl ++++ b/src/p2p/net_node.inl +@@ -60,9 +60,16 @@ + #include "cryptonote_core/cryptonote_core.h" + #include "net/parse.h" + +-#include +-#include +-#include ++// We have to look for miniupnpc headers in different places, dependent on if its compiled or external ++#ifdef UPNP_STATIC ++ #include ++ #include ++ #include ++#else ++ #include "miniupnpc.h" ++ #include "upnpcommands.h" ++ #include "upnperrors.h" ++#endif + + #undef MONERO_DEFAULT_LOG_CATEGORY + #define MONERO_DEFAULT_LOG_CATEGORY "net.p2p" +-- +2.17.0 + +--- a/external/CMakeLists.txt 2021-12-04 03:56:51.405517304 +0200 ++++ b/external/CMakeLists.txt 2021-12-04 04:02:37.649484660 +0200 +@@ -34,24 +34,46 @@ + # We always compile if we are building statically to reduce static dependency issues... + # ...except for FreeBSD, because FreeBSD is a special case that doesn't play well with + # others. ++if(NOT IOS) ++ find_package(Miniupnpc QUIET) ++endif() + +-find_package(Miniupnpc REQUIRED) +- +-message(STATUS "Using in-tree miniupnpc") +-set(UPNPC_NO_INSTALL TRUE CACHE BOOL "Disable miniupnp installation" FORCE) +-add_subdirectory(miniupnp/miniupnpc) +-set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") +-set_property(TARGET libminiupnpc-static PROPERTY POSITION_INDEPENDENT_CODE ON) +-if(MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") +-elseif(NOT MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++# If we have the correct shared version and we're not building static, use it ++if(STATIC OR IOS) ++ set(USE_SHARED_MINIUPNPC false) ++elseif(MINIUPNP_FOUND AND MINIUPNPC_VERSION_1_7_OR_HIGHER) ++ set(USE_SHARED_MINIUPNPC true) + endif() ++ ++ ++if(USE_SHARED_MINIUPNPC) ++ message(STATUS "Using shared miniupnpc found at ${MINIUPNP_INCLUDE_DIR}") ++ ++ set(UPNP_STATIC false PARENT_SCOPE) ++ set(UPNP_INCLUDE ${MINIUPNP_INCLUDE_DIR} PARENT_SCOPE) ++ set(UPNP_LIBRARIES ${MINIUPNP_LIBRARY} PARENT_SCOPE) ++else() ++ if(STATIC) ++ message(STATUS "Using miniupnpc from local source tree for static build") ++ else() ++ message(STATUS "Using miniupnpc from local source tree (/external/miniupnp/miniupnpc)") ++ endif() ++ add_subdirectory(miniupnp/miniupnpc) ++ ++ set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") ++ if(MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") ++ elseif(NOT MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++ endif() ++ + if(CMAKE_SYSTEM_NAME MATCHES "NetBSD") + set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -D_NETBSD_SOURCE") + endif() + +-set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++ set(UPNP_STATIC true PARENT_SCOPE) ++ set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++endif() + + find_package(Unbound) + diff --git a/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch b/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch new file mode 100644 index 0000000000..e15ebc127a --- /dev/null +++ b/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch @@ -0,0 +1,28 @@ +From 1e5f48aa9dcb8c17b645fa09544da08c7c9be432 Mon Sep 17 00:00:00 2001 +From: Bernd Kuhls +Date: Mon, 31 Oct 2022 19:11:37 +0100 +Subject: [PATCH] Fix compilation and JIT support on aarch64_be + +Patch sent upstream: https://github.com/tevador/RandomX/pull/257 + +Signed-off-by: Bernd Kuhls +--- + external/randomx/CMakeLists.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 4b6ba9e..2812449 100644 +--- a/external/randomx/CMakeLists.txt ++++ b/external/randomx/CMakeLists.txt +@@ -150,7 +150,7 @@ if(ARCH_ID STREQUAL "ppc64" OR ARCH_ID STREQUAL "ppc64le") + endif() + + # ARMv8 +-if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") ++if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "aarch64_be" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") + list(APPEND randomx_sources + src/jit_compiler_a64_static.S + src/jit_compiler_a64.cpp) +-- +2.34.1 + diff --git a/package/monero/Config.in b/package/monero/Config.in new file mode 100644 index 0000000000..c18d54e684 --- /dev/null +++ b/package/monero/Config.in @@ -0,0 +1,35 @@ +config BR2_PACKAGE_MONERO + bool "monero" + depends on !BR2_i386 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem + # monero needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + select BR2_PACKAGE_BOOST + select BR2_PACKAGE_BOOST_CHRONO + select BR2_PACKAGE_BOOST_DATE_TIME + select BR2_PACKAGE_BOOST_FILESYSTEM + select BR2_PACKAGE_BOOST_LOCALE + select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS + select BR2_PACKAGE_BOOST_REGEX + select BR2_PACKAGE_BOOST_SERIALIZATION + select BR2_PACKAGE_BOOST_SYSTEM + select BR2_PACKAGE_BOOST_THREAD + select BR2_PACKAGE_CZMQ + select BR2_PACKAGE_LIBMINIUPNPC + select BR2_PACKAGE_LIBSODIUM + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_UNBOUND + help + The secure, private, untraceable cryptocurrency + + https://getmonero.org/ + +comment "monero needs a glibc or musl toolchain w/ C++, dynamic library, threads" + depends on !BR2_i386 + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS + depends on BR2_TOOLCHAIN_USES_UCLIBC || \ + !BR2_INSTALL_LIBSTDCPP || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_HAS_THREADS diff --git a/package/monero/monero.hash b/package/monero/monero.hash new file mode 100644 index 0000000000..91f452cbec --- /dev/null +++ b/package/monero/monero.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 0b667acba2223f8f082b388d7ceb5d212e0515b8a94395f3ec69183ef4bebf6c monero-source-v0.18.1.2.tar.bz2 +sha256 c2fe351163f4e0cee45d38e9481f2ea60f3cb77b24f818c4a2c740383f2f4cb2 LICENSE diff --git a/package/monero/monero.mk b/package/monero/monero.mk new file mode 100644 index 0000000000..ee215f90e1 --- /dev/null +++ b/package/monero/monero.mk @@ -0,0 +1,55 @@ +################################################################################ +# +# monero +# +################################################################################ + +MONERO_VERSION = 0.18.1.2 +MONERO_SOURCE = monero-source-v$(MONERO_VERSION).tar.bz2 +MONERO_SITE = https://downloads.getmonero.org/cli +MONERO_LICENSE = MIT +MONERO_LICENSE_FILES = LICENSE +MONERO_CONF_OPTS = \ + -DBUILD_DOCUMENTATION=OFF \ + -DCMAKE_CXX_FLAGS="$(MONERO_CXXFLAGS)" \ + -DCMAKE_BUILD_TYPE=None \ + -DMANUAL_SUBMODULES=ON \ + -DSTACK_TRACE=OFF \ + -DUSE_CCACHE=OFF \ + -DUSE_DEVICE_TREZOR=OFF +MONERO_DEPENDENCIES = \ + boost \ + czmq \ + libminiupnpc \ + libsodium \ + openssl \ + unbound + +ifeq ($(BR2_aarch64_be)$(BR2_mips)$(BR2_mipsel)$(BR2_mips64el)$(BR2_sparc64),y) +MONERO_CONF_OPTS += -DNO_AES=ON +endif + +MONERO_CXXFLAGS = $(TARGET_CXXFLAGS) -std=c++11 + +# Uses __atomic_load_8 +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +MONERO_CXXFLAGS += -latomic +endif + +# relocation truncated to fit: R_MIPS_GOT16 +ifeq ($(BR2_mipsel),y) +MONERO_CXXFLAGS += -mxgot +endif + +ifeq ($(BR2_PACKAGE_HIDAPI),y) +MONERO_DEPENDENCIES += hidapi +endif + +ifeq ($(BR2_PACKAGE_READLINE),y) +MONERO_CONF_OPTS += -DUSE_READLINE=ON +MONERO_DEPENDENCIES += readline +else +MONERO_CONF_OPTS += -DUSE_READLINE=OFF +endif + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:25:15 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:15 +0100 Subject: [Buildroot] [PATCH 1/3] package/unbound: install to staging Message-ID: <20221031182517.263500-1-bernd.kuhls@t-online.de> Needed for Monero: https://github.com/monero-project/monero/blob/release-v0.18/cmake/FindUnbound.cmake Signed-off-by: Bernd Kuhls --- package/unbound/unbound.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index d86d9c2067..7b62522727 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -6,6 +6,7 @@ UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_INSTALL_STAGING = YES UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause UNBOUND_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:25:17 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:17 +0100 Subject: [Buildroot] [PATCH 3/3] package/p2pool: new package In-Reply-To: <20221031182517.263500-1-bernd.kuhls@t-online.de> References: <20221031182517.263500-1-bernd.kuhls@t-online.de> Message-ID: <20221031182517.263500-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + package/Config.in | 1 + ...lation-and-JIT-support-on-aarch64_be.patch | 28 +++++++++++++++++++ package/p2pool/Config.in | 25 +++++++++++++++++ package/p2pool/p2pool.hash | 3 ++ package/p2pool/p2pool.mk | 27 ++++++++++++++++++ 6 files changed, 85 insertions(+) create mode 100644 package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch create mode 100644 package/p2pool/Config.in create mode 100644 package/p2pool/p2pool.hash create mode 100644 package/p2pool/p2pool.mk diff --git a/DEVELOPERS b/DEVELOPERS index 7db7954871..3a2a15216e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -409,6 +409,7 @@ F: package/minidlna/ F: package/mjpg-streamer/ F: package/monero/ F: package/nut/ +F: package/p2pool/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ F: package/perl-crypt-openssl-rsa/ diff --git a/package/Config.in b/package/Config.in index ac811bf2e4..d14e7473b6 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2181,6 +2181,7 @@ menu "Miscellaneous" source "package/mobile-broadband-provider-info/Config.in" source "package/monero/Config.in" source "package/netdata/Config.in" + source "package/p2pool/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" source "package/qpdf/Config.in" diff --git a/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch b/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch new file mode 100644 index 0000000000..4109856234 --- /dev/null +++ b/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch @@ -0,0 +1,28 @@ +From 1e5f48aa9dcb8c17b645fa09544da08c7c9be432 Mon Sep 17 00:00:00 2001 +From: Bernd Kuhls +Date: Mon, 31 Oct 2022 19:11:37 +0100 +Subject: [PATCH] Fix compilation and JIT support on aarch64_be + +Patch sent upstream: https://github.com/tevador/RandomX/pull/257 + +Signed-off-by: Bernd Kuhls +--- + external/src/RandomX/CMakeLists.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 4b6ba9e..2812449 100644 +--- a/external/src/RandomX/CMakeLists.txt ++++ b/external/src/RandomX/CMakeLists.txt +@@ -150,7 +150,7 @@ if(ARCH_ID STREQUAL "ppc64" OR ARCH_ID STREQUAL "ppc64le") + endif() + + # ARMv8 +-if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") ++if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "aarch64_be" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") + list(APPEND randomx_sources + src/jit_compiler_a64_static.S + src/jit_compiler_a64.cpp) +-- +2.34.1 + diff --git a/package/p2pool/Config.in b/package/p2pool/Config.in new file mode 100644 index 0000000000..5717033748 --- /dev/null +++ b/package/p2pool/Config.in @@ -0,0 +1,25 @@ +config BR2_PACKAGE_P2POOL + bool "p2pool" + depends on BR2_ARCH_IS_64 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS # libuv + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libuv + depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # libuv + # p2pool needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + depends on BR2_USE_MMU # libuv + select BR2_PACKAGE_LIBCURL + select BR2_PACKAGE_LIBUV + select BR2_PACKAGE_ZEROMQ + help + Decentralized pool for Monero mining + + https://p2pool.io/ + +comment "monero needs a glibc or musl toolchain w/ C++, NPTL, dynamic library" + depends on BR2_ARCH_IS_64 + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ + BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/p2pool/p2pool.hash b/package/p2pool/p2pool.hash new file mode 100644 index 0000000000..b2d2ebd195 --- /dev/null +++ b/package/p2pool/p2pool.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 ba00735eb0b6bd357c041492d2c8b76e9b39d397123611c4f32412e65d8aafca p2pool-v2.4-br1.tar.gz +sha256 605e9047a563c5c8396ffb18232aa4304ec56586aee537c45064c6fb425e44ad LICENSE diff --git a/package/p2pool/p2pool.mk b/package/p2pool/p2pool.mk new file mode 100644 index 0000000000..75b3409b19 --- /dev/null +++ b/package/p2pool/p2pool.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# p2pool +# +################################################################################ + +P2POOL_VERSION = v2.4 +P2POOL_SITE_METHOD = git +P2POOL_SITE = https://github.com/SChernykh/p2pool.git +P2POOL_GIT_SUBMODULES = YES +P2POOL_LICENSE = GPL-3.0+ +P2POOL_LICENSE_FILES = LICENSE +P2POOL_DEPENDENCIES = libcurl libuv zeromq + +# prevent compiler warnings being treated as errors +define P2POOL_REMOVE_WARNING_FLAGS + $(SED) '/set(WARNING_FLAGS/d' $(@D)/cmake/flags.cmake +endef +P2POOL_POST_PATCH_HOOKS += P2POOL_REMOVE_WARNING_FLAGS + +# Upstream provides no installation rule: +# *** No rule to make target 'install/fast'. Stop. +define P2POOL_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/p2pool $(TARGET_DIR)/usr/bin/p2pool +endef + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:41:45 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:41:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/xmrig: bump version to 6.18.1 Message-ID: <20221031184145.321293-1-bernd.kuhls@t-online.de> Changelog: https://github.com/xmrig/xmrig/blob/master/CHANGELOG.md Signed-off-by: Bernd Kuhls --- package/xmrig/xmrig.hash | 2 +- package/xmrig/xmrig.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/xmrig/xmrig.hash b/package/xmrig/xmrig.hash index 5b9d4402b5..3c50faf23f 100644 --- a/package/xmrig/xmrig.hash +++ b/package/xmrig/xmrig.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4531a31c0c095fcae18fdef0157f1e2a6694408abbcff6789c8f3cd6ab2c3ca0 xmrig-6.18.0.tar.gz +sha256 f97fe20248e0eb452f77e9b69f2fb1510b852152b3af4f9a8b20680c854888d1 xmrig-6.18.1.tar.gz sha256 589ed823e9a84c56feb95ac58e7cf384626b9cbf4fda2a907bc36e103de1bad2 LICENSE diff --git a/package/xmrig/xmrig.mk b/package/xmrig/xmrig.mk index 40db428b56..ca5bcecfbe 100644 --- a/package/xmrig/xmrig.mk +++ b/package/xmrig/xmrig.mk @@ -4,7 +4,7 @@ # ################################################################################ -XMRIG_VERSION = 6.18.0 +XMRIG_VERSION = 6.18.1 XMRIG_SITE = $(call github,xmrig,xmrig,v$(XMRIG_VERSION)) XMRIG_LICENSE = GPL-3.0+ XMRIG_LICENSE_FILES = LICENSE -- 2.34.1 From christian at paral.in Mon Oct 31 18:55:14 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 11:55:14 -0700 Subject: [Buildroot] [PATCH v1 1/1] package/cni-plugins: new package In-Reply-To: <20221031114444.283e4776@windsurf> References: <20220821053547.667311-1-christian@paral.in> <20221031114444.283e4776@windsurf> Message-ID: Hi Thomas, On Mon, Oct 31, 2022, 3:44 AM Thomas Petazzoni wrote: > > +define CNI_PLUGINS_INSTALL_TARGET_CMDS > > + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin > > + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ > > + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ > > + $(TARGET_DIR)/opt/cni/bin > > I kept it like this, but it's fairly unusual to install stuff in /opt. > Is this the normal location for these plugins? Shouldn't they go in > /usr/libexec/cni/, or something like that? > https://github.com/containerd/containerd/blob/main/script/setup/install-cni#L25 Every doc and script I've seen installs to /opt - which is why I followed that pattern. Best, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From bernd.kuhls at t-online.de Mon Oct 31 19:52:03 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:03 +0100 Subject: [Buildroot] [PATCH v2 1/3] package/unbound: install to staging Message-ID: <20221031195205.429257-1-bernd.kuhls@t-online.de> Needed for Monero: https://github.com/monero-project/monero/blob/release-v0.18/cmake/FindUnbound.cmake Signed-off-by: Bernd Kuhls --- v2: no changes package/unbound/unbound.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index d86d9c2067..7b62522727 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -6,6 +6,7 @@ UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_INSTALL_STAGING = YES UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause UNBOUND_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 19:52:05 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:05 +0100 Subject: [Buildroot] [PATCH v2 3/3] package/p2pool: new package In-Reply-To: <20221031195205.429257-1-bernd.kuhls@t-online.de> References: <20221031195205.429257-1-bernd.kuhls@t-online.de> Message-ID: <20221031195205.429257-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- v2: disabled support for BR2_aarch64_be, not supported upstream: https://github.com/tevador/RandomX/pull/257 DEVELOPERS | 1 + package/Config.in | 1 + package/p2pool/Config.in | 27 +++++++++++++++++++++++++++ package/p2pool/p2pool.hash | 3 +++ package/p2pool/p2pool.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 59 insertions(+) create mode 100644 package/p2pool/Config.in create mode 100644 package/p2pool/p2pool.hash create mode 100644 package/p2pool/p2pool.mk diff --git a/DEVELOPERS b/DEVELOPERS index 7db7954871..3a2a15216e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -409,6 +409,7 @@ F: package/minidlna/ F: package/mjpg-streamer/ F: package/monero/ F: package/nut/ +F: package/p2pool/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ F: package/perl-crypt-openssl-rsa/ diff --git a/package/Config.in b/package/Config.in index ac811bf2e4..d14e7473b6 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2181,6 +2181,7 @@ menu "Miscellaneous" source "package/mobile-broadband-provider-info/Config.in" source "package/monero/Config.in" source "package/netdata/Config.in" + source "package/p2pool/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" source "package/qpdf/Config.in" diff --git a/package/p2pool/Config.in b/package/p2pool/Config.in new file mode 100644 index 0000000000..53f894e309 --- /dev/null +++ b/package/p2pool/Config.in @@ -0,0 +1,27 @@ +config BR2_PACKAGE_P2POOL + bool "p2pool" + depends on BR2_ARCH_IS_64 + depends on !BR2_aarch64_be + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS # libuv + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libuv + depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # libuv + # p2pool needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + depends on BR2_USE_MMU # libuv + select BR2_PACKAGE_LIBCURL + select BR2_PACKAGE_LIBUV + select BR2_PACKAGE_ZEROMQ + help + Decentralized pool for Monero mining + + https://p2pool.io/ + +comment "monero needs a glibc or musl toolchain w/ C++, NPTL, dynamic library" + depends on BR2_ARCH_IS_64 + depends on !BR2_aarch64_be + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ + BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/p2pool/p2pool.hash b/package/p2pool/p2pool.hash new file mode 100644 index 0000000000..b2d2ebd195 --- /dev/null +++ b/package/p2pool/p2pool.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 ba00735eb0b6bd357c041492d2c8b76e9b39d397123611c4f32412e65d8aafca p2pool-v2.4-br1.tar.gz +sha256 605e9047a563c5c8396ffb18232aa4304ec56586aee537c45064c6fb425e44ad LICENSE diff --git a/package/p2pool/p2pool.mk b/package/p2pool/p2pool.mk new file mode 100644 index 0000000000..75b3409b19 --- /dev/null +++ b/package/p2pool/p2pool.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# p2pool +# +################################################################################ + +P2POOL_VERSION = v2.4 +P2POOL_SITE_METHOD = git +P2POOL_SITE = https://github.com/SChernykh/p2pool.git +P2POOL_GIT_SUBMODULES = YES +P2POOL_LICENSE = GPL-3.0+ +P2POOL_LICENSE_FILES = LICENSE +P2POOL_DEPENDENCIES = libcurl libuv zeromq + +# prevent compiler warnings being treated as errors +define P2POOL_REMOVE_WARNING_FLAGS + $(SED) '/set(WARNING_FLAGS/d' $(@D)/cmake/flags.cmake +endef +P2POOL_POST_PATCH_HOOKS += P2POOL_REMOVE_WARNING_FLAGS + +# Upstream provides no installation rule: +# *** No rule to make target 'install/fast'. Stop. +define P2POOL_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/p2pool $(TARGET_DIR)/usr/bin/p2pool +endef + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 19:52:04 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:04 +0100 Subject: [Buildroot] [PATCH v2 2/3] package/monero: new package In-Reply-To: <20221031195205.429257-1-bernd.kuhls@t-online.de> References: <20221031195205.429257-1-bernd.kuhls@t-online.de> Message-ID: <20221031195205.429257-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- v2: disabled support for BR2_aarch64_be, not supported upstream: https://github.com/tevador/RandomX/pull/257 DEVELOPERS | 1 + package/Config.in | 1 + .../monero/0001-disable-stack-protector.patch | 22 ++++ package/monero/0002-system-miniupnpc.patch | 112 ++++++++++++++++++ package/monero/Config.in | 35 ++++++ package/monero/monero.hash | 3 + package/monero/monero.mk | 55 +++++++++ 7 files changed, 229 insertions(+) create mode 100644 package/monero/0001-disable-stack-protector.patch create mode 100644 package/monero/0002-system-miniupnpc.patch create mode 100644 package/monero/Config.in create mode 100644 package/monero/monero.hash create mode 100644 package/monero/monero.mk diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..7db7954871 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -407,6 +407,7 @@ F: package/libyuv/ F: package/mesa3d/ F: package/minidlna/ F: package/mjpg-streamer/ +F: package/monero/ F: package/nut/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ diff --git a/package/Config.in b/package/Config.in index fff8186351..ac811bf2e4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2179,6 +2179,7 @@ menu "Miscellaneous" source "package/haveged/Config.in" source "package/linux-syscall-support/Config.in" source "package/mobile-broadband-provider-info/Config.in" + source "package/monero/Config.in" source "package/netdata/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" diff --git a/package/monero/0001-disable-stack-protector.patch b/package/monero/0001-disable-stack-protector.patch new file mode 100644 index 0000000000..0407b4e32d --- /dev/null +++ b/package/monero/0001-disable-stack-protector.patch @@ -0,0 +1,22 @@ +Disable unconditional stack-protector support + +Signed-off-by: Bernd Kuhls + +diff -uNr monero-source-v0.18.1.0.orig/CMakeLists.txt monero-source-v0.18.1.0/CMakeLists.txt +--- monero-source-v0.18.1.0.orig/CMakeLists.txt 2022-08-10 05:34:23.000000000 +0200 ++++ monero-source-v0.18.1.0/CMakeLists.txt 2022-08-15 18:40:52.240699837 +0200 +@@ -831,14 +831,6 @@ + add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS) + add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS) + +- # -fstack-protector +- if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) +- add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS) +- add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS) +- endif() +- + # New in GCC 8.2 + if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) + add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS) diff --git a/package/monero/0002-system-miniupnpc.patch b/package/monero/0002-system-miniupnpc.patch new file mode 100644 index 0000000000..e12d9302bd --- /dev/null +++ b/package/monero/0002-system-miniupnpc.patch @@ -0,0 +1,112 @@ +Add support for miniupnpc system library + +Downloaded from +https://git.alpinelinux.org/aports/plain/community/monero/system-miniupnpc.patch + +Signed-off-by: Bernd Kuhls + +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -676,6 +676,14 @@ + include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations") + add_subdirectory(external) + ++# Final setup for miniupnpc ++if(UPNP_STATIC OR IOS) ++ add_definitions("-DUPNP_STATIC") ++else() ++ add_definitions("-DUPNP_DYNAMIC") ++ include_directories(${UPNP_INCLUDE}) ++endif() ++ + # Final setup for libunbound + include_directories(${UNBOUND_INCLUDE_DIR}) + +diff --git a/src/p2p/net_node.inl b/src/p2p/net_node.inl +index 9b21705e..76340a22 100644 +--- a/src/p2p/net_node.inl ++++ b/src/p2p/net_node.inl +@@ -60,9 +60,16 @@ + #include "cryptonote_core/cryptonote_core.h" + #include "net/parse.h" + +-#include +-#include +-#include ++// We have to look for miniupnpc headers in different places, dependent on if its compiled or external ++#ifdef UPNP_STATIC ++ #include ++ #include ++ #include ++#else ++ #include "miniupnpc.h" ++ #include "upnpcommands.h" ++ #include "upnperrors.h" ++#endif + + #undef MONERO_DEFAULT_LOG_CATEGORY + #define MONERO_DEFAULT_LOG_CATEGORY "net.p2p" +-- +2.17.0 + +--- a/external/CMakeLists.txt 2021-12-04 03:56:51.405517304 +0200 ++++ b/external/CMakeLists.txt 2021-12-04 04:02:37.649484660 +0200 +@@ -34,24 +34,46 @@ + # We always compile if we are building statically to reduce static dependency issues... + # ...except for FreeBSD, because FreeBSD is a special case that doesn't play well with + # others. ++if(NOT IOS) ++ find_package(Miniupnpc QUIET) ++endif() + +-find_package(Miniupnpc REQUIRED) +- +-message(STATUS "Using in-tree miniupnpc") +-set(UPNPC_NO_INSTALL TRUE CACHE BOOL "Disable miniupnp installation" FORCE) +-add_subdirectory(miniupnp/miniupnpc) +-set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") +-set_property(TARGET libminiupnpc-static PROPERTY POSITION_INDEPENDENT_CODE ON) +-if(MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") +-elseif(NOT MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++# If we have the correct shared version and we're not building static, use it ++if(STATIC OR IOS) ++ set(USE_SHARED_MINIUPNPC false) ++elseif(MINIUPNP_FOUND AND MINIUPNPC_VERSION_1_7_OR_HIGHER) ++ set(USE_SHARED_MINIUPNPC true) + endif() ++ ++ ++if(USE_SHARED_MINIUPNPC) ++ message(STATUS "Using shared miniupnpc found at ${MINIUPNP_INCLUDE_DIR}") ++ ++ set(UPNP_STATIC false PARENT_SCOPE) ++ set(UPNP_INCLUDE ${MINIUPNP_INCLUDE_DIR} PARENT_SCOPE) ++ set(UPNP_LIBRARIES ${MINIUPNP_LIBRARY} PARENT_SCOPE) ++else() ++ if(STATIC) ++ message(STATUS "Using miniupnpc from local source tree for static build") ++ else() ++ message(STATUS "Using miniupnpc from local source tree (/external/miniupnp/miniupnpc)") ++ endif() ++ add_subdirectory(miniupnp/miniupnpc) ++ ++ set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") ++ if(MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") ++ elseif(NOT MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++ endif() ++ + if(CMAKE_SYSTEM_NAME MATCHES "NetBSD") + set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -D_NETBSD_SOURCE") + endif() + +-set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++ set(UPNP_STATIC true PARENT_SCOPE) ++ set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++endif() + + find_package(Unbound) + diff --git a/package/monero/Config.in b/package/monero/Config.in new file mode 100644 index 0000000000..59036286cd --- /dev/null +++ b/package/monero/Config.in @@ -0,0 +1,35 @@ +config BR2_PACKAGE_MONERO + bool "monero" + depends on !BR2_aarch64_be && !BR2_i386 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem + # monero needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + select BR2_PACKAGE_BOOST + select BR2_PACKAGE_BOOST_CHRONO + select BR2_PACKAGE_BOOST_DATE_TIME + select BR2_PACKAGE_BOOST_FILESYSTEM + select BR2_PACKAGE_BOOST_LOCALE + select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS + select BR2_PACKAGE_BOOST_REGEX + select BR2_PACKAGE_BOOST_SERIALIZATION + select BR2_PACKAGE_BOOST_SYSTEM + select BR2_PACKAGE_BOOST_THREAD + select BR2_PACKAGE_CZMQ + select BR2_PACKAGE_LIBMINIUPNPC + select BR2_PACKAGE_LIBSODIUM + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_UNBOUND + help + The secure, private, untraceable cryptocurrency + + https://getmonero.org/ + +comment "monero needs a glibc or musl toolchain w/ C++, dynamic library, threads" + depends on !BR2_aarch64_be && !BR2_i386 + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS + depends on BR2_TOOLCHAIN_USES_UCLIBC || \ + !BR2_INSTALL_LIBSTDCPP || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_HAS_THREADS diff --git a/package/monero/monero.hash b/package/monero/monero.hash new file mode 100644 index 0000000000..91f452cbec --- /dev/null +++ b/package/monero/monero.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 0b667acba2223f8f082b388d7ceb5d212e0515b8a94395f3ec69183ef4bebf6c monero-source-v0.18.1.2.tar.bz2 +sha256 c2fe351163f4e0cee45d38e9481f2ea60f3cb77b24f818c4a2c740383f2f4cb2 LICENSE diff --git a/package/monero/monero.mk b/package/monero/monero.mk new file mode 100644 index 0000000000..ee215f90e1 --- /dev/null +++ b/package/monero/monero.mk @@ -0,0 +1,55 @@ +################################################################################ +# +# monero +# +################################################################################ + +MONERO_VERSION = 0.18.1.2 +MONERO_SOURCE = monero-source-v$(MONERO_VERSION).tar.bz2 +MONERO_SITE = https://downloads.getmonero.org/cli +MONERO_LICENSE = MIT +MONERO_LICENSE_FILES = LICENSE +MONERO_CONF_OPTS = \ + -DBUILD_DOCUMENTATION=OFF \ + -DCMAKE_CXX_FLAGS="$(MONERO_CXXFLAGS)" \ + -DCMAKE_BUILD_TYPE=None \ + -DMANUAL_SUBMODULES=ON \ + -DSTACK_TRACE=OFF \ + -DUSE_CCACHE=OFF \ + -DUSE_DEVICE_TREZOR=OFF +MONERO_DEPENDENCIES = \ + boost \ + czmq \ + libminiupnpc \ + libsodium \ + openssl \ + unbound + +ifeq ($(BR2_aarch64_be)$(BR2_mips)$(BR2_mipsel)$(BR2_mips64el)$(BR2_sparc64),y) +MONERO_CONF_OPTS += -DNO_AES=ON +endif + +MONERO_CXXFLAGS = $(TARGET_CXXFLAGS) -std=c++11 + +# Uses __atomic_load_8 +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +MONERO_CXXFLAGS += -latomic +endif + +# relocation truncated to fit: R_MIPS_GOT16 +ifeq ($(BR2_mipsel),y) +MONERO_CXXFLAGS += -mxgot +endif + +ifeq ($(BR2_PACKAGE_HIDAPI),y) +MONERO_DEPENDENCIES += hidapi +endif + +ifeq ($(BR2_PACKAGE_READLINE),y) +MONERO_CONF_OPTS += -DUSE_READLINE=ON +MONERO_DEPENDENCIES += readline +else +MONERO_CONF_OPTS += -DUSE_READLINE=OFF +endif + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 20:35:01 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 21:35:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 References: <20221023165026.13707-1-fontaine.fabrice__23420.659061388$1666543861$gmane$org@gmail.com> Message-ID: Am Sun, 23 Oct 2022 18:50:26 +0200 schrieb Fabrice Fontaine: > - Drop all patches (already in version) > - Replace README by LICENSE file added with > https://github.com/madler/zlib/commit/ 352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/releases/tag/v1.2.13 Hi, ftr: this fixes CVE-2022-37434: https://nvd.nist.gov/vuln/detail/CVE-2022-37434 Regards, Bernd From thomas.petazzoni at bootlin.com Mon Oct 31 20:39:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:39:26 +0100 Subject: [Buildroot] NodeJS, qemu wrapper and ELF interpreter fun Message-ID: <20221031213926.50d3c778@windsurf> Hello, I finally took some time to investigate the NodeJS build issue that occurs on x86-64: http://autobuild.buildroot.net/results/4f2/4f29c5e663b5d01af20d671baf6504332b8c1f7b/build-end.log The failure goes like this: cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj.host/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../../out/Release/bytecode_builtins_list_generator) Return code is 1 This problem also has a bug report at https://bugs.busybox.net/show_bug.cgi?id=14366. As you probably know, v8-qemu-wrapper is a script that uses Qemu user-mode emulation to run some programs built for the target. We are then supposed to use the libraries built for the target, but here for some reason, the C library of the host gets used, and it fails badly because it is older than the C library that is available for the target. So the question is: why the heck does Qemu use the host C library? To answer this question, we first have to look at how the -L option of Qemu is implemented. This option is documented as such: -L path QEMU_LD_PREFIX set the elf interpreter prefix to 'path' And the v8-qemu-wrapper script makes this option point to $(STAGING_DIR), so that the ELF interpreter used is the one in $(STAGING_DIR). However, contrary to what the option documentation says, this option does much more than setting the ELF interpreter prefix: it is going to affect how *all* system calls manipulating files (open, etc.) are going to work. When this option is passed, the function init_paths() in https://git.qemu.org/?p=qemu.git;a=blob;f=util/path.c is called at initialization time, and essentially its sets the global "base" variable to point to the directory passed as -L argument. Then, for every single syscall that manipulates a path, this path will be passed through the path() function in the same file. This function will first attempt to resolve the path with "base" as a prefix, and if not, return the unprefixed path. After adding some traces into this function, I was able to understand what happens: (1) -L$(STAGING_DIR) is passed, causing "base" to point to $(STAGING_DIR) (2) The target ELF interpreter from $(STAGING_DIR) is properly invoked (3) When this ELF interpreter then resolves the libc.so.6 library, it first looks for /etc/ld.so.cache. (4) Qemu first looks for /etc/ld.so.cache with the -L prefix, i.e $(STAGING_DIR)/etc/ld.so.cache, but it does not exist. So, the Qemu system call emulation falls back to /etc/ld.so.cache, which means the target ELF interpreter reads the /etc/ld.so.cache of the host system. (5) This /etc/ld.so.cache of the host system says that libc.so.6 is in /lib/x86_64-linux-gnu/ (6) The target ELF interpreter therefore tries to use /lib/x86_64-linux-gnu/libc.so.6. The Qemu system call emulation first tries $(STAGING_DIR)/lib/x86_64-linux-gnu/libc.so.6, but this library does not exist (it is in $(STAGING_DIR)/lib/libc.so.6), so the Qemu system call emulation falls back to /lib/x86_64-linux-gnu/libc.so.6 of the host system, which exist... but is too old compared to the target C library. Indeed, results from ld.so.cache take precedence over the simple resolution of library paths in /usr/lib and /lib. We see 3 possible ideas to resolve this problem: (A) Change the behavior of Qemu to not fallback to unprefixed paths: when -L is passed, all path-related system calls should see the paths prefixed by the -L option. Issue with this is that this change is unlikely to get accepted by Qemu upstream. And there might be some side effects we have not really identified. (B) Create an empty $(STAGING_DIR)/etc/ld.so.cache. We have tested this solution and it works: it gets used instead of the host /etc/ld.so.cache. Because $(STAGING_DIR)/etc/ld.so.cache is empty, there's no libc.so.6 match, so the target ELF interpreter goes through its normal library location resolution logic, which falls back to trying in /usr/lib and /lib, which works as those paths ends up being prefixed with $(STAGING_DIR) by Qemu. (C) Pass LD_LIBRARY_PATH pointing to $(STAGING_DIR)/lib and $(STAGING_DIR)/usr/lib in the Qemu wrapper. This works because LD_LIBRARY_PATH paths have precedence over paths given by ld.so.cache. This is the solution already used by the GOI qemu wrapper in package/gobject-introspection/g-ir-scanner-qemuwrapper.in, and which was suggested in bug https://bugs.busybox.net/show_bug.cgi?id=14366. Any opinion? Or other ideas? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 20:47:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:47:39 +0100 Subject: [Buildroot] [PATCH 1/3] package/ssdp-responder: bump to version 1.9 In-Reply-To: <20221031174632.377586-2-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> <20221031174632.377586-2-troglobit@gmail.com> Message-ID: <20221031214739.6b258cb3@windsurf> On Mon, 31 Oct 2022 18:46:30 +0100 Joachim Wiberg wrote: > Changes: > - New command line options to ssdp-scan > - Update copyright years (affects LICENSE file hash) > > Fixes: > - Workaround for OpenVPN /32 default server setup > - Time-of-check vs time-of-use issue with caching of UUID, > found by Coverity Scan, fixed by Raul Porancea > > Signed-off-by: Joachim Wiberg Thanks for the patch! One request below. > --- > package/ssdp-responder/ssdp-responder.hash | 4 ++-- > package/ssdp-responder/ssdp-responder.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/ssdp-responder/ssdp-responder.hash b/package/ssdp-responder/ssdp-responder.hash > index e8cbbb4a1f..425ad86e08 100644 > --- a/package/ssdp-responder/ssdp-responder.hash > +++ b/package/ssdp-responder/ssdp-responder.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 7ae49229e7c7a55fed9e36598b12e2173eecef0fffe0a386b6a10fad30f3c79f ssdp-responder-1.8.tar.gz > -sha256 e17dc0bc91bf499d8cca5e016c22c6d2a4770e3cc1a43756a7973375a83ddb90 LICENSE > +sha256 974c244abd4ba8c87532867a84756182a1460c99072ffb1eb91c5a1f73311d89 ssdp-responder-1.9.tar.gz > +sha256 68d6fdc22e337f725fe719bf9ae6d92b1d8d0ca4cff8219b303ab76706670a8d LICENSE The hash of the license file is changed, this should be explained in the commit log (what are the changes, do they require changing the license information in the .mk file). Silently changing the license file hashes defeats the entire purpose of having hashes for license files, which is precisely to carefully verify what has changed in the license file. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 20:49:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:49:56 +0100 Subject: [Buildroot] [PATCH 3/3] package/ssdp-responder: fix warnings from check-package and shellcheck In-Reply-To: <20221031174632.377586-4-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> <20221031174632.377586-4-troglobit@gmail.com> Message-ID: <20221031214956.37e0ef12@windsurf> On Mon, 31 Oct 2022 18:46:32 +0100 Joachim Wiberg wrote: > +cmd() > +{ > + start-stop-daemon -q -p "$PIDFILE" -x "$DAEMON" "$@" > + status=$? > + [ $status -eq 0 ] && echo "OK" || echo "FAIL" > + > + return $status > +} I don't think we're using this cmd construct anywhere else in the tree, or did I miss some change in our coding style/policy? > > start() { > - printf 'Starting %s: ' "$NAME" > - start-stop-daemon -S -q -p $PIDFILE -x $DAEMON -- $DAEMON_ARGS > - [ $? = 0 ] && echo "OK" || echo "FAIL" This all looked matching our coding style. Why are you changing this? > case "$1" in > - start|stop|restart) > - "$1" > - ;; > - reload) > - restart > - ;; > - *) > - echo "Usage: $0 {start|stop|restart|reload}" > - exit 1 > + start|stop|restart) > + "$1" > + ;; > + reload) > + restart > + ;; > + *) > + echo "Usage: $0 {start|stop|restart|reload}" > + exit 1 I'm not sure what is the recommended indentation style in our init scripts. Tabs? Spaces? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:02:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:02:26 +0100 Subject: [Buildroot] [PATCH v2 1/5] arch/Config.in.xtensa: adjust endianness logic to avoid bogus configurations In-Reply-To: <20220925101041.GH1127102@scaer> References: <20220925090920.1585682-1-thomas.petazzoni@bootlin.com> <20220925090920.1585682-2-thomas.petazzoni@bootlin.com> <20220925101041.GH1127102@scaer> Message-ID: <20221031220226.36f3ccf8@windsurf> Hello, Sorry to bring back this topic only now, but there are still Xtensa issues that we need to resolve, and this series was aiming at solving them. But I have further questions. On Sun, 25 Sep 2022 12:10:41 +0200 "Yann E. MORIN" wrote: > > diff --git a/arch/Config.in.xtensa b/arch/Config.in.xtensa > > index f9d5adb4c9..4bb58e1964 100644 > > --- a/arch/Config.in.xtensa > > +++ b/arch/Config.in.xtensa > > @@ -37,6 +37,10 @@ config BR2_XTENSA_LITTLE_ENDIAN > > > > config BR2_XTENSA_BIG_ENDIAN > > bool "Big endian" > > + # Internal toolchains without an overlay file are always > > + # little-endian, so we prevent from selecting big endian in > > + # this case. > > + depends on BR2_XTENSA_OVERLAY_FILE != "" || BR2_TOOLCHAIN_EXTERNAL > > I think that dependency should go to the whole choice instead: > > choice > prompt "Target Architecture Endianness" > default BR2_XTENSA_LITTLE_ENDIAN > depends on BR2_XTENSA_CUSTOM || BR2_TOOLCHAIN_EXTERNAL My memory is probably vague, but I don't see how this solve the problem. The problem was to prevent the user from choosing "big endian" if he has selected a custom core but not specified an overlay. > This should cover the external toolchain case, and the internal > toolchain for a custom core (assuming we keep the no-empty overlay for > custom cores). Not sure what you mean by "assuming we keep the no-empty overlay for custom cores". > > I.e. semantically, choosing between big or little is not about having or > not having an overlay, but about being a custom core or not (or using a > custom toolchain). Not sure to follow you here. The only issue is precisely that if you don't specify an overlay, there is no way your custom Xtensa core can be big endian: it will be little endian. The configuration we want to prevent the user from creating is: custom core, no overlay, big endian. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:05:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:05:11 +0100 Subject: [Buildroot] [PATCH v2 2/5] Revert "arch/xtensa: custom configuration requires an overlay" In-Reply-To: <20220925121302.6e9aa48d@windsurf> References: <20220925090920.1585682-1-thomas.petazzoni@bootlin.com> <20220925090920.1585682-3-thomas.petazzoni@bootlin.com> <20220925100355.GG1127102@scaer> <20220925121302.6e9aa48d@windsurf> Message-ID: <20221031220511.76f39b7f@windsurf> On Sun, 25 Sep 2022 12:13:02 +0200 Thomas Petazzoni wrote: > > As 4cbf7336914f explained, an empty overlay is equivalent to using the > > fsf variant, so in that case, there would be no point in asking for a > > custom core to begin with, and Max Filipov seemed to agree: > > https://lore.kernel.org/buildroot/CAMo8BfKHKuVC86uOwP0z8CzE425q7u0B_q6jdeU0Rw9upaiY=Q at mail.gmail.com/ > > > > So, I think we are maybe taking the issue from the wrong side here. We > > should forbid an empty overlay only when using our internal toolchain > > for a custom xtensa core. I.e.: > > > > diff --git a/arch/arch.mk.xtensa b/arch/arch.mk.xtensa > > index 7b6c59cecd..1799528a93 100644 > > --- a/arch/arch.mk.xtensa > > +++ b/arch/arch.mk.xtensa > > @@ -1,8 +1,10 @@ > > BR_ARCH_XTENSA_OVERLAY_FILE = $(call qstrip,$(BR2_XTENSA_OVERLAY_FILE)) > > > > -ifeq ($(BR_BUILDING)$(BR2_XTENSA_CUSTOM):$(BR_ARCH_XTENSA_OVERLAY_FILE),yy:) > > +ifeq ($(BR_BUILDING)$(BR2_TOOLCHAIN_BUILDROOT),yy) > > +ifeq ($(BR_ARCH_XTENSA_OVERLAY_FILE),) > > $(error No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting) > > endif > > +endif > > You're right, this seems to be a better approach. In the case of an > internal toolchain with custom core, it means the user still sees the > little/big endian choice, but if he hasn't specified an overlay, the > build will be aborted early on. Now that I re-read this, I'm no longer sure to understand. If you have a configuration BR2_TOOLCHAIN_BUILDROOT=y, BR2_xtensa_fsf=y, then BR2_XTENSA_OVERLAY_FILE will be empty, but it's perfectly normal. But with your proposed change, such a configuration would no longer build, as we would now always require an overlay to be specified. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:07:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:07:13 +0100 Subject: [Buildroot] [PATCH 1/1] support/config-fragments/autobuild: fix bootlin-xtensa-uclibc.config In-Reply-To: <20221010030937.6432-1-ju.o@free.fr> References: <20221010030937.6432-1-ju.o@free.fr> Message-ID: <20221031220713.5c81cc21@windsurf> Hello Julien, On Sun, 9 Oct 2022 23:09:37 -0400 Julien Olivain wrote: > Commit 4cbf7336914f25478aea943456ba7dc3c892c21a > "arch/xtensa: custom configuration requires an overlay" > added an error message if BR2_XTENSA_CUSTOM is set and > BR_ARCH_XTENSA_OVERLAY_FILE is unset. > > When testing a package with the command: > > ./utils/test-pkg --all --package somepackage > > bootlin-xtensa-uclibc toolchain is always failing with error in the logfile: > > arch/arch.mk.xtensa:4: *** No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting. Stop. > > This commit fixes the toolchain config fragment by adding the same overlay > file found in qemu_xtensa_lx60_defconfig. > > Signed-off-by: Julien Olivain > --- > support/config-fragments/autobuild/bootlin-xtensa-uclibc.config | 1 + > 1 file changed, 1 insertion(+) Thanks, but adding an overlay here is not the right solution. The problem is that 4cbf7336914f25478aea943456ba7dc3c892c21a is incorrect. I already sent a series to fix that on Sep 25, 2022: https://lore.kernel.org/buildroot/20220925090920.1585682-1-thomas.petazzoni at bootlin.com/ but it did receive some comments, and therefore was not applied. But the solution is more along the lines of changing how Xtensa is handled rather than working around the problem in bootlin-xtensa-uclibc.config. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Mon Oct 31 21:40:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 22:40:34 +0100 Subject: [Buildroot] [PATCH 1/1] package/xerces: bump to version 3.2.4 Message-ID: <20221031214034.20298-1-fontaine.fabrice@gmail.com> Drop second patch (already in version) https://github.com/apache/xerces-c/compare/v3.2.3...v3.2.4 Signed-off-by: Fabrice Fontaine --- ...oadMsg-fix-memory-leak-when-transcod.patch | 87 ------------------- package/xerces/xerces.hash | 4 +- package/xerces/xerces.mk | 2 +- 3 files changed, 3 insertions(+), 90 deletions(-) delete mode 100644 package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch diff --git a/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch b/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch deleted file mode 100644 index 76b37c63d9..0000000000 --- a/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 1bdf6d8ba878c1fe1d779824be70001fc0bebd2c Mon Sep 17 00:00:00 2001 -From: Even Rouault -Date: Fri, 27 Aug 2021 01:33:27 +0200 -Subject: [PATCH] InMemMsgLoader::loadMsg(): fix memory leak when transcoding - fails. - -Seen with the IconvGNU transcoder when parsing " - ---- - .../MsgLoaders/InMemory/InMemMsgLoader.cpp | 31 ++++++++++++++----- - 1 file changed, 23 insertions(+), 8 deletions(-) - -diff --git a/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp b/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -index cda103226..6971fde96 100644 ---- a/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -+++ b/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -@@ -25,6 +25,7 @@ - // --------------------------------------------------------------------------- - #include - #include -+#include - #include - #include - #include -@@ -153,14 +154,28 @@ bool InMemMsgLoader::loadMsg(const XMLMsgLoader::XMLMsgId msgToLoad - XMLCh* tmp4 = 0; - - bool bRet = false; -- if (repText1) -- tmp1 = XMLString::transcode(repText1, manager); -- if (repText2) -- tmp2 = XMLString::transcode(repText2, manager); -- if (repText3) -- tmp3 = XMLString::transcode(repText3, manager); -- if (repText4) -- tmp4 = XMLString::transcode(repText4, manager); -+ try -+ { -+ if (repText1) -+ tmp1 = XMLString::transcode(repText1, manager); -+ if (repText2) -+ tmp2 = XMLString::transcode(repText2, manager); -+ if (repText3) -+ tmp3 = XMLString::transcode(repText3, manager); -+ if (repText4) -+ tmp4 = XMLString::transcode(repText4, manager); -+ } -+ catch( const TranscodingException& ) -+ { -+ if (tmp1) -+ manager->deallocate(tmp1); -+ if (tmp2) -+ manager->deallocate(tmp2); -+ if (tmp3) -+ manager->deallocate(tmp3); -+ // Note: tmp4 cannot leak -+ throw; -+ } - - bRet = loadMsg(msgToLoad, toFill, maxChars, tmp1, tmp2, tmp3, tmp4, manager); - --- -2.17.1 - diff --git a/package/xerces/xerces.hash b/package/xerces/xerces.hash index c75ce860e8..e6b5b922d2 100644 --- a/package/xerces/xerces.hash +++ b/package/xerces/xerces.hash @@ -1,5 +1,5 @@ -# From http://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.2.3.tar.xz.sha256 -sha256 12fc99a9fc1d1a79bd0e927b8b5637a576d6656f45b0d5e70ee3694d379cc149 xerces-c-3.2.3.tar.xz +# From http://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.2.4.tar.xz.sha256 +sha256 075bc57940da0f9be6dd183c550c8ce0b9833e4550dc382048377a1a5e3b2bd9 xerces-c-3.2.4.tar.xz # Hash for license file sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/xerces/xerces.mk b/package/xerces/xerces.mk index a3e5361b2e..08efa6fb5c 100644 --- a/package/xerces/xerces.mk +++ b/package/xerces/xerces.mk @@ -4,7 +4,7 @@ # ################################################################################ -XERCES_VERSION = 3.2.3 +XERCES_VERSION = 3.2.4 XERCES_SOURCE = xerces-c-$(XERCES_VERSION).tar.xz XERCES_SITE = http://archive.apache.org/dist/xerces/c/3/sources XERCES_LICENSE = Apache-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Mon Oct 31 21:57:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 22:57:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/flann: bump to version 1.9.2 Message-ID: <20221031215748.41579-1-fontaine.fabrice@gmail.com> - lz4 is a mandatory dependency since https://github.com/flann-lib/flann/commit/df3fc59212660e43867cb85d5e557f5cae6d30d7 - Drop patch (not needed since https://github.com/flann-lib/flann/commit/86c92adbdea3e41d7ad371732cfe3b8231e0ecc6) - PYTHON_EXECUTABLE can be dropped since https://github.com/flann-lib/flann/commit/5f4ac506323585c1f74ef57a73962beb887e3a3b https://github.com/flann-lib/flann/blob/1.9.2/ChangeLog Signed-off-by: Fabrice Fontaine --- .../0001-src-cpp-fix-cmake-3.11-build.patch | 80 ------------------- package/flann/Config.in | 1 + package/flann/flann.hash | 2 +- package/flann/flann.mk | 4 +- 4 files changed, 4 insertions(+), 83 deletions(-) delete mode 100644 package/flann/0001-src-cpp-fix-cmake-3.11-build.patch diff --git a/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch b/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch deleted file mode 100644 index b37bedcf6d..0000000000 --- a/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch +++ /dev/null @@ -1,80 +0,0 @@ -From fa5ec96a94646492a3f908e12905b3e48a8e800b Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Wed, 18 Apr 2018 20:24:13 +0200 -Subject: [PATCH] src/cpp: fix cmake >= 3.11 build - -CMake < 3.11 doesn't support add_library() without any source file -(i.e add_library(foo SHARED)). But flann CMake use a trick that use -an empty string "" as source list (i.e add_library(foo SHARED "")). -This look like a bug in CMake < 3.11. - -With CMake >= 3.11, the new behaviour of add_library() break the -existing flann CMake code. - -From CMake Changelog [1]: -"add_library() and add_executable() commands can now be called without - any sources and will not complain as long as sources are added later - via the target_sources() command." - -Note: flann CMake code doesn't use target_sources() since no source file -are provided intentionally since the flann shared library is created by -linking with the flann_cpp_s static library with this line: - -target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive) - -If you try to use "add_library(flann_cpp SHARED ${CPP_SOURCES})" (as it should -be normally done), the link fail due to already defined symbol. - -They are building the shared version using the static library "to speedup the -build time" [3] - -This issue is already reported upstream [2] with a proposed solution. - -Upstream status: Pending - -Fixes: -http://autobuild.buildroot.net/results/b2f/b2febfaf8c44ce477b3e4a5b9b976fd25e8d7454 - -[1] https://cmake.org/cmake/help/v3.11/release/3.11.html -[2] https://github.com/mariusmuja/flann/issues/369 -[3] https://github.com/mariusmuja/flann/commit/0fd62b43be2fbb0b8d791ee36290791224dc030c - -Signed-off-by: Romain Naour ---- - src/cpp/CMakeLists.txt | 4 ++-- - src/cpp/empty.cpp | 1 + - 2 files changed, 3 insertions(+), 2 deletions(-) - create mode 100644 src/cpp/empty.cpp - -diff --git a/src/cpp/CMakeLists.txt b/src/cpp/CMakeLists.txt -index b44a735..a816863 100644 ---- a/src/cpp/CMakeLists.txt -+++ b/src/cpp/CMakeLists.txt -@@ -29,7 +29,7 @@ if (BUILD_CUDA_LIB) - endif() - - if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND CMAKE_COMPILER_IS_GNUCC) -- add_library(flann_cpp SHARED "") -+ add_library(flann_cpp SHARED "empty.cpp") - set_target_properties(flann_cpp PROPERTIES LINKER_LANGUAGE CXX) - target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive) - -@@ -85,7 +85,7 @@ if (BUILD_C_BINDINGS) - set_property(TARGET flann_s PROPERTY COMPILE_DEFINITIONS FLANN_STATIC) - - if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND CMAKE_COMPILER_IS_GNUCC) -- add_library(flann SHARED "") -+ add_library(flann SHARED "empty.cpp") - set_target_properties(flann PROPERTIES LINKER_LANGUAGE CXX) - target_link_libraries(flann -Wl,-whole-archive flann_s -Wl,-no-whole-archive) - else() -diff --git a/src/cpp/empty.cpp b/src/cpp/empty.cpp -new file mode 100644 -index 0000000..40a8c17 ---- /dev/null -+++ b/src/cpp/empty.cpp -@@ -0,0 +1 @@ -+/* empty */ --- -2.14.3 - diff --git a/package/flann/Config.in b/package/flann/Config.in index 3725fc784f..180d7eae8a 100644 --- a/package/flann/Config.in +++ b/package/flann/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_FLANN bool "flann" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + select BR2_PACKAGE_LZ4 help FLANN is a library for performing fast approximate nearest neighbor searches in high dimensional spaces. It contains a diff --git a/package/flann/flann.hash b/package/flann/flann.hash index 543e4b483d..6eaa48c403 100644 --- a/package/flann/flann.hash +++ b/package/flann/flann.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b23b5f4e71139faa3bcb39e6bbcc76967fbaf308c4ee9d4f5bfbeceaa76cc5d3 flann-1.9.1.tar.gz +sha256 e26829bb0017f317d9cc45ab83ddcb8b16d75ada1ae07157006c1e7d601c8824 flann-1.9.2.tar.gz sha256 3993f339cc56506c62aa1eb2fb76f240ee93b738d857832899c1e207b1dc069a COPYING diff --git a/package/flann/flann.mk b/package/flann/flann.mk index 6c2e6a9e78..d1a622e685 100644 --- a/package/flann/flann.mk +++ b/package/flann/flann.mk @@ -4,18 +4,18 @@ # ################################################################################ -FLANN_VERSION = 1.9.1 +FLANN_VERSION = 1.9.2 FLANN_SITE = $(call github,mariusmuja,flann,$(FLANN_VERSION)) FLANN_INSTALL_STAGING = YES FLANN_LICENSE = BSD-3-Clause FLANN_LICENSE_FILES = COPYING +FLANN_DEPENDENCIES = host-pkgconf lz4 FLANN_CONF_OPTS = \ -DBUILD_C_BINDINGS=ON \ -DBUILD_PYTHON_BINDINGS=OFF \ -DBUILD_MATLAB_BINDINGS=OFF \ -DBUILD_EXAMPLES=$(if $(BR2_PACKAGE_FLANN_EXAMPLES),ON,OFF) \ -DUSE_OPENMP=$(if $(BR2_TOOLCHAIN_HAS_OPENMP),ON,OFF) \ - -DPYTHON_EXECUTABLE=OFF \ -DCMAKE_DISABLE_FIND_PACKAGE_HDF5=TRUE FLANN_CXXFLAGS = $(TARGET_CXXFLAGS) -- 2.35.1 From fontaine.fabrice at gmail.com Mon Oct 31 22:00:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 23:00:20 +0100 Subject: [Buildroot] [PATCH 1/1] package/uftrace: bump to version 0.12 Message-ID: <20221031220020.44199-1-fontaine.fabrice@gmail.com> Drop second patch (already in version) https://github.com/namhyung/uftrace/blob/v0.12/NEWS Signed-off-by: Fabrice Fontaine --- ...support.c-define-EF_ARM_VFP_FLOAT-wh.patch | 31 ------------------- package/uftrace/uftrace.hash | 2 +- package/uftrace/uftrace.mk | 2 +- 3 files changed, 2 insertions(+), 33 deletions(-) delete mode 100644 package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch diff --git a/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch b/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch deleted file mode 100644 index 03fba88693..0000000000 --- a/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 4e543097e62eb052650433d1d4c9c5996d30f242 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 23 Apr 2021 23:06:01 +0200 -Subject: [PATCH] arch/arm/mcount-support.c: define EF_ARM_VFP_FLOAT when not - available - -uClibc-ng doesn't define EF_ARM_VFP_FLOAT, so let's define it. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/mcount-support.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/arch/arm/mcount-support.c b/arch/arm/mcount-support.c -index 8d23460b..51331740 100644 ---- a/arch/arm/mcount-support.c -+++ b/arch/arm/mcount-support.c -@@ -3,6 +3,10 @@ - #include - #include - -+#ifndef EF_ARM_VFP_FLOAT -+# define EF_ARM_VFP_FLOAT 0x400 -+#endif -+ - #ifndef EF_ARM_ABI_FLOAT_HARD - # define EF_ARM_ABI_FLOAT_HARD EF_ARM_VFP_FLOAT - #endif --- -2.30.2 - diff --git a/package/uftrace/uftrace.hash b/package/uftrace/uftrace.hash index b2a3ddc5a9..195f0605c8 100644 --- a/package/uftrace/uftrace.hash +++ b/package/uftrace/uftrace.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 b8b56d540ea95c3eafe56440d6a998e0a140d53ca2584916b6ca82702795bbd9 uftrace-0.10.tar.gz +sha256 2aad01f27d4f18717b681824c7a28ac3e1efd5e7bbed3ec888a3ea5af60e3700 uftrace-0.12.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/uftrace/uftrace.mk b/package/uftrace/uftrace.mk index b487b30695..d36c3bd8f5 100644 --- a/package/uftrace/uftrace.mk +++ b/package/uftrace/uftrace.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTRACE_VERSION = 0.10 +UFTRACE_VERSION = 0.12 UFTRACE_SITE = $(call github,namhyung,uftrace,v$(UFTRACE_VERSION)) UFTRACE_LICENSE = GPL-2.0 UFTRACE_LICENSE_FILES = COPYING -- 2.35.1 From thomas.petazzoni at bootlin.com Mon Oct 31 22:02:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 23:02:27 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: <20220904191010.200822-1-christian@paral.in> References: <20220904191010.200822-1-christian@paral.in> Message-ID: <20221031230227.222d7ad1@windsurf> Hello Christian, On Sun, 4 Sep 2022 12:10:10 -0700 Christian Stewart via buildroot wrote: > -$(eval $(python-package)) > +DOCKER_COMPOSE_BUILD_TARGETS = cmd > +DOCKER_COMPOSE_GOMOD = github.com/docker/compose/v2 > +DOCKER_COMPOSE_LDFLAGS = \ > + -X github.com/docker/compose/v2/internal.Version=$(DOCKER_COMPOSE_VERSION) > + > +define DOCKER_COMPOSE_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 755 $(@D)/bin/cmd \ > + $(TARGET_DIR)/usr/lib/docker/cli-plugins/docker-compose > +endef > + > +$(eval $(golang-package)) It looks like this commit has broken our docker compose test case (support/testing/tests/package/test_docker_compose.py). Indeed, this test expects to be able to run a command called "docker-compose", which no longer exists, so the test fails with: # docker-compose up -d -sh: docker-compose: not found # echo $? 127 See: https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442 https://buildroot.org.gitlab.io/-/buildroot/-/jobs/3249828442/artifacts/test-output/TestDockerCompose-build.log https://buildroot.org.gitlab.io/-/buildroot/-/jobs/3249828442/artifacts/test-output/TestDockerCompose-run.log Could have a look and provide a patch to fix this test case? Also, could you send a patch adding yourself in the DEVELOPERS file for this test case, since you're often looking after Docker related topics in Buildroot? Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Mon Oct 31 22:08:04 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:08:04 -0700 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: <20221031230227.222d7ad1@windsurf> References: <20220904191010.200822-1-christian@paral.in> <20221031230227.222d7ad1@windsurf> Message-ID: Hi Thomas, On Mon, Oct 31, 2022 at 3:02 PM Thomas Petazzoni wrote: > It looks like this commit has broken our docker compose test case > (support/testing/tests/package/test_docker_compose.py). Indeed, this > test expects to be able to run a command called "docker-compose", which > no longer exists, so the test fails with: > > # docker-compose up -d > -sh: docker-compose: not found > # echo $? > 127 The change is to run "docker compose" instead of "docker-compose" diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120 > Also, could you send a patch adding yourself in the DEVELOPERS file for > this test case, since you're often looking after Docker related topics > in Buildroot? I can send a patch for that too, are you able to check real quick if that change above fixes the issue? Thanks, Christian Stewart From fontaine.fabrice at gmail.com Mon Oct 31 22:11:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 23:11:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpm: bump to version 4.18.0 Message-ID: <20221031221131.257422-1-fontaine.fabrice@gmail.com> https://rpm.org/wiki/Releases/4.18.0 Signed-off-by: Fabrice Fontaine --- package/rpm/rpm.hash | 4 ++-- package/rpm/rpm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/rpm/rpm.hash b/package/rpm/rpm.hash index 19b6dd9176..dfe50303f7 100644 --- a/package/rpm/rpm.hash +++ b/package/rpm/rpm.hash @@ -1,5 +1,5 @@ -# From https://rpm.org/wiki/Releases/4.17.0.html -sha256 2e0d220b24749b17810ed181ac1ed005a56bbb6bc8ac429c21f314068dc65e6a rpm-4.17.0.tar.bz2 +# From https://rpm.org/wiki/Releases/4.18.0.html +sha256 2a17152d7187ab30edf2c2fb586463bdf6388de7b5837480955659e5e9054554 rpm-4.18.0.tar.bz2 # Hash for license file sha256 171d94d9f1641316bff7f157a903237dc69cdb5fca405fed8c832c76ed8370f9 COPYING diff --git a/package/rpm/rpm.mk b/package/rpm/rpm.mk index 5c04d47f10..fc57a14fd6 100644 --- a/package/rpm/rpm.mk +++ b/package/rpm/rpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -RPM_VERSION_MAJOR = 4.17 +RPM_VERSION_MAJOR = 4.18 RPM_VERSION = $(RPM_VERSION_MAJOR).0 RPM_SOURCE = rpm-$(RPM_VERSION).tar.bz2 RPM_SITE = http://ftp.rpm.org/releases/rpm-$(RPM_VERSION_MAJOR).x -- 2.35.1 From christian at paral.in Mon Oct 31 22:29:07 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:29:07 -0700 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add myself for package/docker-compose Message-ID: <20221031222907.275293-1-christian@paral.in> Signed-off-by: Christian Stewart --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..e1e919ce4f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -554,6 +554,7 @@ F: package/pkg-golang.mk F: package/rtl8821au/ F: package/runc/ F: package/tini/ +F: support/testing/tests/package/test_docker_compose.py N: Christophe Priouzeau F: board/stmicroelectronics/stm32f429-disco/ -- 2.38.1 From christian at paral.in Mon Oct 31 22:31:33 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:31:33 -0700 Subject: [Buildroot] [PATCH 1/1] support/testing/tests/package/test_docker-compose: fix docker compose binary name Message-ID: <20221031223133.278452-1-christian@paral.in> Docker compose is now invoked as "docker compose" not "docker-compose." Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) -- 2.38.1 From thomas.petazzoni at bootlin.com Mon Oct 31 22:31:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 23:31:34 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: References: <20220904191010.200822-1-christian@paral.in> <20221031230227.222d7ad1@windsurf> Message-ID: <20221031233134.6d432abd@windsurf> On Mon, 31 Oct 2022 15:08:04 -0700 Christian Stewart wrote: > I can send a patch for that too, are you able to check real quick if > that change above fixes the issue? It does fix the docker compose issue, but then the loop of docker inspect that waits for the container to be ready never completes: # while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 [.... until it gets killed by the timeout ....] Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Mon Oct 31 23:13:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 1 Nov 2022 00:13:33 +0100 Subject: [Buildroot] [PATCH 1/1] package/libtorrent-rasterbar: openssl is optional, not mandatory Message-ID: <20221031231333.706055-1-fontaine.fabrice@gmail.com> openssl is optional, not mandatory, since the addition of the package in commit 0393f5d34433e34e49ff7ce0fb998735453ed4fc Signed-off-by: Fabrice Fontaine --- package/libtorrent-rasterbar/Config.in | 1 - package/libtorrent-rasterbar/libtorrent-rasterbar.mk | 9 ++++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/package/libtorrent-rasterbar/Config.in b/package/libtorrent-rasterbar/Config.in index fe9a9fc027..459edc1be5 100644 --- a/package/libtorrent-rasterbar/Config.in +++ b/package/libtorrent-rasterbar/Config.in @@ -18,7 +18,6 @@ config BR2_PACKAGE_LIBTORRENT_RASTERBAR depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # exception_ptr select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_SYSTEM - select BR2_PACKAGE_OPENSSL help libtorrent is a feature complete C++ bittorrent implementation focusing on efficiency and scalability. diff --git a/package/libtorrent-rasterbar/libtorrent-rasterbar.mk b/package/libtorrent-rasterbar/libtorrent-rasterbar.mk index 914e0cbca3..085b38343c 100644 --- a/package/libtorrent-rasterbar/libtorrent-rasterbar.mk +++ b/package/libtorrent-rasterbar/libtorrent-rasterbar.mk @@ -11,7 +11,7 @@ LIBTORRENT_RASTERBAR_LICENSE = BSD-3-Clause LIBTORRENT_RASTERBAR_LICENSE_FILES = COPYING LIBTORRENT_RASTERBAR_CPE_ID_VENDOR = libtorrent LIBTORRENT_RASTERBAR_CPE_ID_PRODUCT = libtorrent -LIBTORRENT_RASTERBAR_DEPENDENCIES = host-pkgconf boost openssl +LIBTORRENT_RASTERBAR_DEPENDENCIES = host-pkgconf boost LIBTORRENT_RASTERBAR_INSTALL_STAGING = YES LIBTORRENT_RASTERBAR_CONF_OPTS = \ --with-boost-libdir=$(STAGING_DIR)/usr/lib \ @@ -37,4 +37,11 @@ else LIBTORRENT_RASTERBAR_CONF_OPTS += --without-libiconv endif +ifeq ($(BR2_PACKAGE_OPENSSL),y) +LIBTORRENT_RASTERBAR_DEPENDENCIES += openssl +LIBTORRENT_RASTERBAR_CONF_OPTS += --enable-encryption +else +LIBTORRENT_RASTERBAR_CONF_OPTS += --disable-encryption +endif + $(eval $(autotools-package)) -- 2.35.1 From christian at paral.in Mon Oct 31 23:27:49 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:49 -0700 Subject: [Buildroot] [PATCH v2 1/4] support/testing/tests/package/test_docker-compose: fix docker compose binary name Message-ID: <20221031232752.626154-1-christian@paral.in> Docker compose is now invoked as "docker compose" not "docker-compose." Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:50 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:50 -0700 Subject: [Buildroot] [PATCH v2 2/4] support/testing/tests/package/test_docker-compose: fix docker compose container name In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-2-christian@paral.in> Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 10ceee3167..c940cc8839 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -42,7 +42,7 @@ class TestDockerCompose(infra.basetest.BRTest): # will download container if not available, which may take some time self.assertRunOk('docker compose up -d', 120) # container may take some time to start - self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) + self.assertRunOk('while ! docker inspect root-busybox-1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) self.assertRunOk('cmp /bin/busybox /tmp/busybox', 120) -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:52 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:52 -0700 Subject: [Buildroot] [PATCH v2 4/4] support/testing/tests/package/test_docker-compose: update kernel to 4.19.262 In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-4-christian@paral.in> Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index a833c68233..38b669fc6d 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -15,7 +15,7 @@ class TestDockerCompose(infra.basetest.BRTest): BR2_ROOTFS_POST_SCRIPT_ARGS="{}" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y - BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204" + BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.262" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="{}" BR2_PACKAGE_CA_CERTIFICATES=y -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:51 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:51 -0700 Subject: [Buildroot] [PATCH v2 3/4] support/testing/tests/package/test_docker-compose: quiet overly verbose output In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-3-christian@paral.in> Docker compose up outputs terminal control characters intended for interactive output viewing. Wget similarly can use the -q option to produce quieter logs. Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index c940cc8839..a833c68233 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,10 +40,10 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker compose up -d', 120) + self.assertRunOk('docker compose up -d --quiet-pull', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root-busybox-1 2>&1 >/dev/null; do sleep 1; done', 120) - self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) + self.assertRunOk('wget -q -O /tmp/busybox http://127.0.0.1/busybox', 120) self.assertRunOk('cmp /bin/busybox /tmp/busybox', 120) def test_run(self): -- 2.38.1 From buildroot at athaariq.my.id Sat Oct 1 02:05:19 2022 From: buildroot at athaariq.my.id (Athaariq Ardhiansyah) Date: Sat, 01 Oct 2022 02:05:19 +0000 (UTC) Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug Message-ID: <20221001020445.1458953-1-buildroot@athaariq.my.id> Temporary fix for buildroot-specific bug. Ideally, we should install linux-headers first then glibc. Is this actually possible on Buildroot? If yes, then we can also fix bug #15021 simultaneously if linux-headers being installed first as possible. Signed-off-by: Athaariq Ardhiansyah --- .../0002-fsconfig_command-workaround.patch | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 package/glibc/0002-fsconfig_command-workaround.patch diff --git a/package/glibc/0002-fsconfig_command-workaround.patch b/package/glibc/0002-fsconfig_command-workaround.patch new file mode 100644 index 0000000000..27dd25b244 --- /dev/null +++ b/package/glibc/0002-fsconfig_command-workaround.patch @@ -0,0 +1,17 @@ +diff --git a/sysdeps/unix/sysv/linux/sys/mount.h b/sysdeps/unix/sysv/linux/sys/mount.h +index 19841d0738..43a681d097 100644 +--- a/sysdeps/unix/sysv/linux/sys/mount.h ++++ b/sysdeps/unix/sysv/linux/sys/mount.h +@@ -27,11 +27,7 @@ + #include + #include + +-#ifdef __has_include +-# if __has_include ("linux/mount.h") +-# include "linux/mount.h" +-# endif +-#endif ++#include "linux/mount.h" + + + #define BLOCK_SIZE_BITS 10 -- 2.37.3 From thomas.petazzoni at bootlin.com Sat Oct 1 05:35:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 01 Oct 2022 05:35:56 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-09-30 Message-ID: <20221001053603.88789419BD@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-09-30 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 1 | 1 | 6 | 2022.05.x | 18 | 7 | 0 | 25 | master | 134 | 290 | 0 | 424 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 20 host-sentry-cli-1.59.0 | 17 igd2-for-linux-2.1 | 13 unknown | 13 autofs-5.1.8 | 10 glibc-2.36-44-g2628500f5dff... | 10 libarchive-3.6.1 | 10 sysvinit-2.99 | 10 host-go-1.19.1 | 8 systemd-250.4 | 8 btrfs-progs-5.16.2 | 6 host-binutils-2.38 | 6 gerbera-1.10.0 | 5 gobject-introspection-1.72.0 | 5 hdparm-9.63 | 5 host-rust-1.64.0 | 5 linux-5.17.15 | 5 dash-0.5.11.5 | 4 host-gcc-final-11.3.0 | 4 libglib2-2.72.3 | 4 casync-4ad9bcb94bc83ff36cfc... | 3 elfutils-0.186 | 3 gensio-2.5.2 | 3 host-binutils-2.39 | 3 host-pahole-73383b3a39afe86... | 3 libcap-ng-0.8.3 | 3 libgpg-error-1.45 | 3 ltp-testsuite-20220527 | 3 lxc-4.0.12 | 3 wolfssl-5.5.0 | 3 dahdi-linux-5c840cf43838e06... | 2 freeradius-server-3.2.0 | 2 gummiboot-2bcd919c681c952eb... | 2 host-binutils-2.37 | 2 host-gcc-final-10.4.0 | 2 host-gdb-arc-2020.09-releas... | 2 igh-ethercat-1.5.2 | 2 linux-tools | 2 mtd-2.1.3 | 2 ntp-4.2.8p15 | 2 quickjs-2021-03-27 | 2 sudo-1.9.11p2 | 2 xenomai-3.0.10 | 2 zlib-ng-2.0.6 | 2 acpid-2.0.33 | 1 afboot-stm32-3566acd582e553... | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 bitcoin-0.21.2 | 1 bpftool-v6.8.0 | 1 brltty-6.4 | 1 cairo-1.16.0 | 1 coreutils-9.1 | 1 cryptodev-linux-1.12 | 1 dmalloc-5.6.5 | 1 dropbear-2022.82 | 1 efivar-37 | 1 erlang-22.3.4.22 | 1 exempi-2.6.1 | 1 fdk-aac-2.0.2 | 1 ffmpeg-4.4.2 | 1 fftw-quad-3.3.8 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /nvmed... | 1 fs/cpio/cpio.mk:117: /nvmed... | 1 fs/cramfs/cramfs.mk:46: /nv... | 1 fs/ubi/ubi.mk:51: /nvmedata... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 gmp-6.2.1 | 1 host-delve-1.8.0 | 1 host-python3-3.10.7 | 1 host-spirv-llvm-translator-... | 1 jack2-1.9.20 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libclc-13.0.1 | 1 libcuefile-475 | 1 libdeflate-1.12 | 1 libgcrypt-1.10.1 | 1 liblog4c-localtime-1.0 | 1 libmdbx-0.11.11 | 1 libostree-2022.5 | 1 libsodium-1.0.18 | 1 libzlib-1.2.12 | 1 linux-5.10.109-cip5-rt4 | 1 luajit-5677985dc1f19cf0a671... | 1 mariadb-10.3.36 | 1 mpfr-4.1.0 | 1 musl-1.2.3 | 1 ntpsec-1_2_1 | 1 ocf-linux-20120127 | 1 open62541-v1.3.3 | 1 openssh-9.0p1 | 1 perl-5.34.1 | 1 procps-ng-3.3.17 | 1 qemu-7.1.0 | 1 rtl8723ds-76146e85847beb242... | 1 sdl-1.2.15 | 1 skalibs-2.10.0.3 | 1 stress-ng-0.13.05 | 1 tealdeer-1.5.0 | 1 uboot-tools-2021.07 | 1 uclibc-1.0.42 | 1 valgrind-3.19.0 | 1 zeek-4.1.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/c19fd0cd8e5db1fb1828570d0883fb900b780c56 | ORPH arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/4394bc30aefb5c88a906cf38b9e90176e54cdf4a | powerpc64le | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/346549264d4b5404b6726323b0194abe6c798ab9 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/c09f18e0bb2bf4a8dcb4d50dd1ed1392ab6c8d04 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/210ae9d27002e332f44b5d63af76013b4914dc86 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3527aa9ea8e151bacad792302b1c4fa46d1a2321 | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6321a82fbd8b2917539e37631447bd6e75e39269 | i586 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7381d4ee7df1523f88cfc1a0c263793ede3ecd91 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2378bc8e7994f41c9fc80f26d0d2e129f7919747 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/98278127535846e2ba80e0c9ab5211fad4023211 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b7389ca1db7679f65f2b7423a2d2af73ac4cf9ae | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce04b19669ee20c8fef569231a3c3b0fd8d3c1cc | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1757e20f24ae24ed881230843e81130c30613752 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1412189a94fe59b7193f745fcea4ba320cbcfe4a | aarch64 | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/63e794bb6dda48163190ce2e006e304a20b180c5 | aarch64_be | bpftool-v6.8.0 | NOK | http://autobuild.buildroot.net/results/aa2aad575178300792802d14c29b921286041a66 | microblazeel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/f000a7c043e76bef384e5dfefa98d9e4412fc99f | mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4ac57ac49892dbbce06d1b5139515e85492f87e2 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8a570b3685adfce6597c077620ef2bf2033f96e7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6b94618755158d129c3388bf6e75da135198b1c2 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/93609544f3673a83ef29edb2bf9a1dcbf95f2af3 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b114f071bd7f707da8efb189fd7fe3a54a78a324 | ORPH i586 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/92da93603cfb86c30c23712afcaf9de4c1e5ff61 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/3c1c0df272004e3b46ffa271965608dc20041382 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/c6ebc1d8f96df8cd19304119ef8c4f4cf4e62c89 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/95190eebf025b9e1d0723eed203bdbb80bc87315 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/feb52d2b30a6f6ac67660dc9b1333adb8504ac48 | sh4a | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/38d9c95b3f6cf8ffada10f22c530d493a693247e | ORPH mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/911a16764a97b20553985491ced63bd8ea5ab996 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6cec43df7af91c12988165351a99c500984cbbd8 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a1af82ab539d436ba4b4618e0cff2d3e841859a4 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c6bc66dd7de13b03207a85fd6933474f5dabc1b2 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7eda6a71816750719e60e05b584b73475ca21e9f | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/27b7da26bdbb109f6b5268356615a5d5322f7caf | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29ad54e314f3bc3bb73bcc8c7b707c426ad987cf | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/044d4326ca0b279968fed29b7462a71e7b472f6a | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aef2a3965a26058f2e5d0b44223f2f350921456c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1195e02791a659858b6b47bbcb6c02e2f79f0d8a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c86ca467ea703af49a7994fee0c8342ab3263291 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eb60a753cb5d6b19d4fd3119c069a1311a7fcd7f | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a7c5c6034ed25bea34ec33b09744e3adaa5fc426 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/878a794d8d49656e19784ca698fdf900c727bbb6 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f452fe08a1e7db2cf1a01aaa31185f404d4b3da1 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/66682a3ef00813661de9bfba16b17b1198093eef | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/252cbc44a5b7f813ef89fd1c39528dc8fe8308b5 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dc5cf477849817da892093c325c9335973216e2c | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/67534e2633b8a023270e89836bb08797ad80d9cb | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07fcc2ba9fe576ddb55cb488d01da915980444b6 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/a5b9521070135abfadd02ac7b25570c1c860817e | ORPH armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e83b49e5a4733b7b97c05949d721ec0218b4a0cf | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5cb5e3852f4b86bd82d2d985dd29edb0edf00f6a | aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5b2ca2593707b67b969a387c6167428b7380eaac | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/063515ed3309e7cf1564f4b20869a02bc0f9f201 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a7c2dd2762d12e5fd351d6f50bed39cc59310154 | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/479b697c384f447eab9b17e868077e0c3e9ec1fe | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/ebb5033cff73f1454df55cd455706a5342d6ca4c | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/4c286a9c699e8d571924831a52ee572ffd11df03 | i686 | efivar-37 | NOK | http://autobuild.buildroot.net/results/445569510364ee78acecd2b44cbf468803eec4ad | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/98867cd2cfe3420478fe58e985a81e44db5d8d8f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b442c71270242334f613996b8be279a564ca686e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f35dcfbb64d2ddf943dacf3708cfa07f3da038a1 | ORPH aarch64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/09eeebfe88cfcb759921d68527e3cee9c66ceaf4 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3f6f808db1451cb58e2bb5682a2209e585758d88 | arm | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/0fcc3d849570188479bfc3e5823a1b64b053df4b | arceb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/44917339eb5a186e808aedb38346748991d8cee5 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/c68ce0ff58d011f58311458e51a76f2e1c525184 | ORPH powerpc | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/ca4f26d527f060951a5f1efa2e1be998571b765f | powerpc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/3c0ea4fbcd6cc5b5f6642a405f6dbcaae5a30e1a | arceb | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/89c89f029a943c3bbdd90183f62d32441888ffce | powerpc | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/14ec3713420fa064a7894288dc82bb934839d0b6 | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/8c6f2d063fb2c021dd1c14b13f4a6fe4f40c3ff0 | powerpc64 | fs/cpio/cpio.mk:117: /nvmed... | NOK | http://autobuild.buildroot.net/results/471544eed4fb692389b9901e9768c97e64062c36 | arc | fs/cpio/cpio.mk:117: /nvmed... | NOK | http://autobuild.buildroot.net/results/dae1f8d13097d60d7862b4048547bffcf9a2a6dc | arm | fs/cramfs/cramfs.mk:46: /nv... | NOK | http://autobuild.buildroot.net/results/3feb0ea546d3d0af56e0af71ddc407e0e0ed70df | powerpc | fs/ubi/ubi.mk:51: /nvmedata... | NOK | http://autobuild.buildroot.net/results/7d99f367f25786e85220f4507c4579209d2b0b8b | mips | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/62845a9c8ea62f6a0f70aae41f5cc04d5d91eb26 | microblaze | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/d50afee90c4c9b987d1dacdd7232b1a9c7466254 | microblazeel | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/6ea4593d1759ae24c684caa6e726f2fcb133d95f | m68k | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/e8880c664bfcc7385fc99e7a4050cb982dd1d852 | arc | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/56133017f958125b25b6f8b5e14d4b435b453e0f | i686 | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/01964b5a6935a1efa69bec0b24c08a2aeaf388b5 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f03d723155c70a14054f0a8227bc63f863c5208e | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/954a1d87ea4dd03320180c3d26d9fc5e8df1bdbc | sh4aeb | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ee0ea90a094fbbaf9eae987a597a6abb61ee15de | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/48e844aa3d9361205d678ba3ef59d261c68e1d33 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b3bdfcd9373dcbb1bc7e322e34f4ee43b222ab39 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a73daf092a96fbee3b3c22216737b4d21773fbf | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6ce881ce6aa95c287c84b14dc1ad38d314194948 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ba1549748bf313cd7b9c7ccf9783e449a60c941 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f949dc7fd14d5c77ec8502c317bb2dfa7087b97b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e75fb3d6afde6c61d7a5dd4f0c1bb58b7c65cd0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca369e50be89979c14bd41ac6ed8c3177254952a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96cfeb41f741dc158887d7b4e687f31096d2727b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a46e1280083d01a7681978804b2d9cf70cf50b22 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2362c1efad2b313d87320d0e51e4c789086ddc2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dccd3ef6a0b285d9a9a50cbe5d688364b031fc9b | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a8e4140a6d75e714b278ec0ff1d749f11bec53b9 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/aa3dccc92ede2542c40f45956de3fdeb1b7216fe | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/81abc1c12c2a5bd0fc0751ee404098696abf5c6f | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/fc7873a1f23200154790e4f762002d39602b4ba3 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5668c62062850a0beda11cddc12357560ce43b14 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/81b41e2fefb522043c43c0ca12ef148f4930671a | ORPH x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/e947b209fcd9830fe82cd1d8eee1fde83fc42a6d | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/f33617892d890781bba3e8fdf9d6d3782469ece3 | nios2 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/03f4a0869c2a9b80c3b369e33f9aef9cdc09639f | sh4 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/343d920fc7f64654a0e2f39a16aba50655a89970 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/1c7273656e3e32194674f11ff850308c1ae530c2 | mips64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/3e5b167113aee08f8377c8fd402874dd1a9d2eed | sparc64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/db70c0e3d8e6adb4bdacc3043186f18e4c6fbc00 | i686 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcfee5e1ee2e41199cf11769e749e4ce1b1a1418 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4f2a087cd83594addc7cccf462efccee1ef2f3b5 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/218be2f1a86a667ed295526e7c1595fb06462123 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/528b93c8e333f19407817a3cb9c4719806af9b08 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9638cc221d9a17335e2cc9a9872662b8a78887d3 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a9a1919643f529f44a42379844f54b57dd9e5e9 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b576ea88984c877683a1f7ffd53b2e160cce1620 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2150bb870ea60c78546bf6705ba18609f7489bee | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/60b3df8c0b449ef19acfbb5b6b0c8a35dd32263d | xtensa | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/43bcb85cea0bc07933c1c4b173d6c30372226670 | riscv32 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/802865d6d7dccdfa95e52a4fceaf7da7a952188a | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/e8e51c24fe689304d6d0247362d3200a3ce9b034 | mips | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/1d2128d3d0912c349ea0f36a1817a445c9569d39 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/37f81f6c73dec15a38275e3c53c8ca741361285d | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/19c1d6e98d83409e8def04de5af6fa5672183789 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/389cb0becc8946f78388130787843acbdcd17ef2 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ee64bcd961c99ffb73f1cf0a78bb37abbee1f6f3 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2879265e9e605a9fcff795ea5fe19dc355c19f81 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/253f406f3ce58ba7eddca26f7df12ef2e88bc892 | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/aa32b2d532e298b41c9112f2579ceb75e9c53020 | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dcada4a4cf12ec4ceb05a2ba9010230e1fbd7d62 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/da0da8fefe2ff4d41dd738ae81db3e9a6185bfdf | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b023afaafb6068f91f0878388951f6d798172be5 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bf63c696cb3f7c5ebf27d3171b75d53fb1fd0d7e | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/61aef9919f1b74a9625f0859159305c35b441b64 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d0e17ba9e5afecb08fc2abe572003ad8f3d0874c | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7dcd83e29114d5d4ae2954665925a03f9e9eb424 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/697b9c46e7369f6616e44ee7c6db6706ecc9c618 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1774d6fd6a1402c7d9821b5777a4ebd7cd56d9cd | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d6ad839a3c8ced1752ee63cd836bd18ef3118539 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ee0c167d6bf053c14756f995b0183fdda164a9fc | sparc | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/f232b85766813ef5081dce104e62335aaa26c0e8 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29043ebb32614921373b50f05a9b2b9fdc4c7fbf | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ed487fa436bbf0ea39af9f943cc2677148aeaef2 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/b43f439916123fb51c79a7e3da4d4e004f5deda1 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c443c1c73bd5477adf1e6534eb4ed9e606bc4326 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6b8f3eed11461df33677fa8b3ce2c6fc3ca2db9e | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1fc2762372492e0a1b4522dd2c9cddc81497bbfc | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/db505a4f3447f0fc580a226d4df4eb7ed211dca5 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/47d6bc012892d49919464159979a637a7e9f0045 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4c05ea00bebe9bbf43fd893b9bb97adb3db1afd4 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d2ba994ca028937fadca91b9f71d78c561ac8cbe | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8d1bc949aff5471fa6787cc05cb5c037b6669269 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ab5171acb971cf111cd5b1a8ce0cfb903487c5b8 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f0ae99cbc79195cfc03987281cabb242d2bd7b2e | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/26dc0bd36ba9208132f18bc825780b1aac9964e1 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c8c686c439a530d5ff8b1dec02255c380d42f5b1 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87223fd971bb6822b7bc4439d232614aed84b1c0 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6eb10b20e60205b7e0162186af460cd58dfb0608 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f40db7779c64a1ce80f15a7ccf7372d7f32f6e06 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1f0dfc92bc2e256c2c8c66e522694e676ddc82f4 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f4837186b711aa0eec3c3accdbe3e767b7b96b07 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/80414785e46df5d004093ffd9f3be29562792777 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6607dfbd7f6010d215becb3040548d097a5c7dea | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/baeafd80e8bae5af0f1f99bd3a3bea383c65b053 | ORPH powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/425b7a1c17cfaef84500c67e6173c69277a20e75 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1fa20f210efcad65316a0d47b0643e1f749ee4eb | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2e00edd06ee3a48f54853c3ea6e28e3b9c7708c3 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/92ff06db127d6dfa5db260792fcdc3b8b43e9b9c | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/464a05ec4b31f30d12d3618cea37002f118fe905 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c0af5123e0e4c05614c755ce824d3d0482cd212d | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a854b7c96745d9c67a5151e592319f55f71ad335 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/64728d09ebb7e93401c5ce4812bea8b45d8d1f42 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d604d7334355860eaee894e66d711eea0245a286 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b6264c0f914543f3200ff2d1433618b24a8fd1af | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0701290d8711f8075c2e5a3c9069c2b6659cd616 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e794c53e1290fceba1abbf5345163b66226c165d | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1cda27bc60fb3ba6dd53386a16e6813920daa624 | arceb | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/961e85c07651e1fe4092e41743c0e7deeb1d97e7 | arm | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/15f246c658dd7f47a9f1150fe7093c34f668d66e | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/2bcca3f478868d27c81cb75c826b592d4d87a0a2 | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/070fae6c0811ab1edc30fa4834f19a25635db6f6 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/48b95964caa997455329538f46c12aae1c3866df | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0c08d6e18f623121f4cc3a275824a47a8677fd5b | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e9a9d9e98515a45afcf5715c7af31d4310132ff0 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/35e0dd96aa2d92f289918b6421cc68d6a6fc58c8 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8e8b1887563261079baae6496e25d47d373ca948 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/6ab8d05b4ed06a5b05d88823f85ebf115b8c4e72 | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9b0ad13f88ee2ce02b87c08a8640dde0d80d08ff | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/184b76bb42a8f4a88bbf9341676814a46da4f820 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e37230d22cf63b494b8a7360ae32b1bd67fb0dae | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/70946aac067fe67b1aa64842963778ca3390ab29 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/8236639c12c6ed11a12a34afc2eddeda248cbbf7 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/04ba5ea1a5abf2f32debf70ffcb45a723ec90e55 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/956d8aad40f43720420fb34b6c5e8d5f62237b83 | arm | libclc-13.0.1 | NOK | http://autobuild.buildroot.net/results/02b07de42d631ba20d7512f0e3460128e79c3453 | riscv64 | libcuefile-475 | NOK | http://autobuild.buildroot.net/results/b282406d72347e0985fc7ee6d85476cf11d576a4 | ORPH armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/28988fb5873b2dc49629d73931f7df0a9ae75fd0 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c9978e12e97e35862e135c023ae27180a9ae3593 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c541c73e4497f98281386c1e540490e09b473aa1 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ce51349aff7c3a2a395ec9aa2517d940f11d5cfb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/58bd8fc7d2e8c8a4a7ba2ee2bd4c6404d2965d0c | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/6202ca7b2c221fd529df5ae01e8fd1d348ef1016 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/3553379c16fb3df38ca6d312bc7e30eddf5f39eb | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/953b49a94a2c8309eeb975707c6227c5cedf0fad | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4de46a881cc9f3ab75c96e28656eb4262f262304 | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/b97f6b790c34c8c9d2d83eaca694e74a7cc23dcd | microblazeel | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/1482995b5c9acc0888e7b94c1607827a5eddae9e | armeb | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/6aa084f37d7d1f80df789524852dd5f000c8b20d | arm | libsodium-1.0.18 | NOK | http://autobuild.buildroot.net/results/94cca2d29feb877b27f5d614b06666fa6866c4aa | mips64el | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/1311b588f5da09dfeb2d8d94c81ce66854e6ff67 | ORPH microblazeel | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/1f54d6bcc4add3641ee342ba8a1f9a7a9decf4d9 | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/3557398d415d3b82eb9ae5fbfcf0d3cb0a529c0b | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/23d042b4c5ab0edf3ce78d06e8b9a9e1eb217157 | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/1e7d07a4c987e25a427a3ed69296fc573bdf7e06 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/a6aff8fe878d66cb8c39f522d5045aa267966493 | ORPH m68k | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/743074f328c559bdd93ff7cdcdff7b45b7c9d074 | ORPH i586 | linux-tools | NOK | http://autobuild.buildroot.net/results/290af135a7b88019dd2b5575c0dc99d000df9ff6 | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/7bbc915c786cc6394efdf67ced350831747ce963 | ORPH microblazeel | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/917473164a36d1ae5e06f3c48df7bd74fed534c7 | or1k | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/ee7d68ffae54e37ca12711d22b7f622003f2ce6a | mips64el | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/3369cce98327d393fb9bfdd6caa44413694e7db7 | powerpc | luajit-5677985dc1f19cf0a671... | NOK | http://autobuild.buildroot.net/results/3752305d88805c60a2b8f2dee2e0ba1b8aac487b | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/8da283093e97eede71fe0a47e852f18d2fe0f1ee | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1adaad1eabbce38dd4f90eb08e43b080c1b3ffa2 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/64922f0ea992a20c08333b2f0e379c368229f5b0 | powerpc64le | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/9bc4b3747e2740a9f3956df3b155981df8b74d61 | ORPH or1k | mpfr-4.1.0 | NOK | http://autobuild.buildroot.net/results/715fd4508df365085c826690f2be9202c1e987ba | ORPH sparc64 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/efefa680bbcc71055f531982d909fa09cb5c7488 | aarch64_be | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/f31585cbd09cb4286768a5f7750db97d3e715ef6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b08956ec6965a652c0357d0eab198fc430f0017d | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/34c9f694d4b6b485318658d7bde0f63f1cce18b5 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/bc7ffb21a485fc1d308e4d35ee3291cfa2b69696 | ORPH m68k | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/da31815b0ce26a32718fda13b9a040884f6f6b80 | ORPH microblazeel | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/b77782ebd013d0d92cde8104d5a8e1e0ebfb5a91 | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/27d16c8d462e760a0640ba4274ea7c0b699192b1 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/6591829b5d013995d11de28fae0963ea2e02b249 | ORPH arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c14d1991c629577f06fe46dfc3ac7bde1a7fb5ea | nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/ce5a690bd3aecf41dd3726f27ec98adf2dc564f9 | ORPH x86_64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/511d2569f4167f1850ab4a3e5db66fa74f19e467 | armeb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/de01f96ea771495282b13a37396aa21d29496cd7 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/49457592280b3f5cfa645c6acf7ef5417c21ac06 | armeb | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/f02a9c6e89b79ac3fdeb0ab7fa2410db6a75eb58 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/177004d55c0985dbb6ba9833fd5b937201ae529d | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/4c7471d5a93447850a3f71ccf3db32e9ebf5d326 | mips64 | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/1bfaf2cd090df6b5fdcb4826020ee4e73730e2e8 | microblaze | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/a23ad499bbc8c86f67f1990bba711b2fbf6fc11d | ORPH mipsel | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/eb25452ef2985b798b1685e9d7d0663b774f76d7 | ORPH mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c7159cce1492e6c417e98c500cd82055ef1e4a39 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9fef4b95fc9d74e60d253dc1fe61008e3cce1f16 | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/83ad8acec4a3704be3c59e0d6ebe8221349acfbf | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/99f4ce7be2fd34e86c25ad6ba5bb82d4540a0b89 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/53df309eb6e06fe1bf4fb61a9088ea4978a404cd | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/91eff3809dd541b119dcb47ca670b266acdb9c22 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f3effa11311a3f7e6251744ac742bc1cfaa791f4 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ff7cb8035d03b2ebeb9f5f19fd05a426c0de7ca6 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44129b3e39ae06065ae4bc7cc0a03f58aefad8d0 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/19c02f0fb2273ce13e8fc0e5946f853f945fd999 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/763bcb4be8b5cacb4434ea6c8b9fc3727a021fec | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7dcf3911a6d1e01ba1a8104c923e091bd4b12406 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dcdcc11fb59eeebb0f8f996f88fb08595b645e26 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/761a8727308f49ebbb5834ca146b52053d3b6d99 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/874cd9a2ccdbcef12687fecd31fb3cab2a7e24c9 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1552ad833c2d5fe30bdde3919e915c0e01206807 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4513523721b4ea83514addf74d30344a53f250c9 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e9f71174e8bdcc97b60b6fbff4127f98fed84b91 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/1074a46fbf55150be350bd5200ade071641fc07b | mips64el | uboot-tools-2021.07 | NOK | http://autobuild.buildroot.net/results/04c98c76a5ebbea769ef6a81bca2a0079da58b94 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ad5a2e088a728fc2083736ccb82dd5db54fa6ac2 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/0acfefb12e25d9fe9d4990305f67261a82a33eaf | s390x | unknown | NOK | http://autobuild.buildroot.net/results/d0a6130e3964ee7f45c917ddf5c5d2b5dda14d52 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/8f86b40a0156c223f1528a477c477fc92ff9389a | s390x | unknown | NOK | http://autobuild.buildroot.net/results/490d52b343c8ee7cf0e7826f7afca02d4d72107c | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/f7b65b996366304c4d6434ead13f35a4a5460fbb | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/6df9484cdd3533ea0cc21a912370736ab657a468 | arm | unknown | NOK | http://autobuild.buildroot.net/results/09a9882ad40e112cede6243e62c040f4dfc00c20 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/a20bff9663134f4085d610546d059516fca7f410 | arm | unknown | NOK | http://autobuild.buildroot.net/results/7b871a40a88b8df73726aa50bbde0564b4484a82 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/13b7ea099342fef781372a6d3bdf02646aa3749b | arc | unknown | NOK | http://autobuild.buildroot.net/results/5e2979436f0d369cf271e6d1f063aa1a0f830801 | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/e070f61637822548c02f99d3c301ace7d5ac1c18 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/56fa7ebb083179bd80e56df9523c88bf7a426d2d | mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/a16a45a1ab910f060bc112bdf07a7e6dc4932431 | ORPH mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/07dbbf5ea77993155e477e4a4dd45348aff8bd83 | riscv32 | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/fc668ff4cfac851be600daef708815230c68e182 | mips64el | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/5155c4deb1e33e63010a57e030e3d7562632537c | s390x | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/d9d5261215142212cbc7c07afbc6520266fba7ff | armeb | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/38686914f1e3e39c005c3c33081c48c3eb88cd75 | sparc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/b0447679b9eef0f8b8af9a32eadaaaaf28526600 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/10941e203caf16d7bfdbca88e30efb6f6ca5b34f | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/dd40b2702b3bc90260415df1c8f6f04c922527ab | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- unknown | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | unknown | TIM | http://autobuild.buildroot.net/results/e8d99f86a0d21630b969f333f40af517232541f6 | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/2b594a16ef29a91d254bed68aa75c7e08848c846 | Classification of failures by reason for 2022.05.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 docker-proxy-339b972b464ee3... | 1 graphicsmagick-1.3.37 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 sudo-1.9.8p2 | 1 tcf-agent-1.7.0 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e4d212330f63c6b6c1d759395ce401f070ec49e3 | powerpc64le | docker-proxy-339b972b464ee3... | NOK | http://autobuild.buildroot.net/results/b51ba2acaad53fa571c8e5aa190dffccb5a70e53 | nios2 | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/1713b2b8fdcf9b94923d256418f5002c687ef316 | mips64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/09d3b16fdbf63544988951b4e9e170a7436ae10c | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e4fac4d259e26345f7a334388fe90c4f96e2a00b | armeb | sudo-1.9.8p2 | NOK | http://autobuild.buildroot.net/results/ef7198d56c01186a1a8aef60ffa4aead8527dd5d | ORPH microblaze | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/123e03ef6cffbb9dd9985b1a7f78cdbe26e21308 | Gitlab CI results for 2022-09-30 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769645 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769655 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769678 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769683 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769686 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769690 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769694 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769696 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769697 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769700 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769701 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769703 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769709 | freescale_imx8mpevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769759 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769773 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769776 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769777 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769779 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769781 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769783 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769784 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769786 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769787 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769808 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769820 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769821 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769831 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769834 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769836 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769838 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769840 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769841 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769855 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769856 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769857 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769858 | octavo_osd32mp1_brk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769859 | octavo_osd32mp1_red | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769860 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769877 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769880 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769881 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769884 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769885 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769887 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769888 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769893 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769895 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769896 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769898 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769904 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769939 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769942 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769953 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769943 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769944 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769945 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769947 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769946 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769948 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769951 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769950 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769956 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769954 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769958 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769962 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769963 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769964 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769966 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769979 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769982 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769987 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769990 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769991 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770001 | ORPH stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770008 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770009 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770010 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770011 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770012 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770013 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770014 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770030 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770032 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770033 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770034 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770037 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770038 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770039 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770040 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770041 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770042 | -- http://autobuild.buildroot.net From heiko.thiery at gmail.com Sat Oct 1 06:56:09 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Sat, 1 Oct 2022 08:56:09 +0200 Subject: [Buildroot] [PATCH] package/rauc: bump to version 1.8 Message-ID: <20221001065609.28815-1-heiko.thiery@gmail.com> See the release notes[1] on GitHub for changes. [1] https://github.com/rauc/rauc/releases/tag/v1.8 Signed-off-by: Heiko Thiery --- package/rauc/rauc.hash | 5 ++--- package/rauc/rauc.mk | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash index 677d358158..8351d0266e 100644 --- a/package/rauc/rauc.hash +++ b/package/rauc/rauc.hash @@ -1,4 +1,3 @@ -# Locally calculated, after verifying against -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz +# Locally calculated +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk index 8bfb0b79ba..0c81a6cc35 100644 --- a/package/rauc/rauc.mk +++ b/package/rauc/rauc.mk @@ -4,7 +4,7 @@ # ################################################################################ -RAUC_VERSION = 1.7 +RAUC_VERSION = 1.8 RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz RAUC_LICENSE = LGPL-2.1 -- 2.20.1 From peter at korsgaard.com Sat Oct 1 07:48:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 1 Oct 2022 09:48:31 +0200 Subject: [Buildroot] [git commit branch/2022.05.x] package/graphicsmagick: bump to version 1.3.38 Message-ID: <20221001074902.55B1D847A4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3b1cef1c0b6a6b1b2da0892bb8469d12cc403ee1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.05.x License file hash is changed, due to a copyright year change: - Copyright (C) 2002-2021 GraphicsMagick Group + Copyright (C) 2002-2022 GraphicsMagick Group Signed-off-by: Grzegorz Blach Signed-off-by: Thomas Petazzoni (cherry picked from commit f27ea50528755b5f353e3db124dee535645dcf09) Signed-off-by: Peter Korsgaard --- package/graphicsmagick/graphicsmagick.hash | 4 ++-- package/graphicsmagick/graphicsmagick.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/graphicsmagick/graphicsmagick.hash b/package/graphicsmagick/graphicsmagick.hash index cf6d224216..80130da5d6 100644 --- a/package/graphicsmagick/graphicsmagick.hash +++ b/package/graphicsmagick/graphicsmagick.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 90dc22f1a7bd240e4c9065a940962bf13da43c99bcc36cb111cc3c1a0d7477d4 GraphicsMagick-1.3.37.tar.xz -sha256 8a4d960c5a3e453ee21e459e1794c7a0c85559825d3363a8d3b510b3344fdad4 Copyright.txt +sha256 d60cd9db59351d2b9cb19beb443170acaa28f073d13d258f67b3627635e32675 GraphicsMagick-1.3.38.tar.xz +sha256 0a20e661de942ebe115a354d0ec6d1d42b93856ea765f813f350a5ce5024cdb7 Copyright.txt diff --git a/package/graphicsmagick/graphicsmagick.mk b/package/graphicsmagick/graphicsmagick.mk index 38743487eb..dbaa8ddf70 100644 --- a/package/graphicsmagick/graphicsmagick.mk +++ b/package/graphicsmagick/graphicsmagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRAPHICSMAGICK_VERSION = 1.3.37 +GRAPHICSMAGICK_VERSION = 1.3.38 GRAPHICSMAGICK_SOURCE = GraphicsMagick-$(GRAPHICSMAGICK_VERSION).tar.xz GRAPHICSMAGICK_SITE = https://downloads.sourceforge.net/project/graphicsmagick/graphicsmagick/$(GRAPHICSMAGICK_VERSION) GRAPHICSMAGICK_LICENSE = MIT From peter at korsgaard.com Sat Oct 1 07:48:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 1 Oct 2022 09:48:38 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/graphicsmagick: bump to version 1.3.38 Message-ID: <20221001075010.2A15E85CBF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=92938648df013e5990812ff1462a70eddf762f5c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x License file hash is changed, due to a copyright year change: - Copyright (C) 2002-2021 GraphicsMagick Group + Copyright (C) 2002-2022 GraphicsMagick Group Signed-off-by: Grzegorz Blach Signed-off-by: Thomas Petazzoni (cherry picked from commit f27ea50528755b5f353e3db124dee535645dcf09) Signed-off-by: Peter Korsgaard --- package/graphicsmagick/graphicsmagick.hash | 4 ++-- package/graphicsmagick/graphicsmagick.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/graphicsmagick/graphicsmagick.hash b/package/graphicsmagick/graphicsmagick.hash index cf6d224216..80130da5d6 100644 --- a/package/graphicsmagick/graphicsmagick.hash +++ b/package/graphicsmagick/graphicsmagick.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 90dc22f1a7bd240e4c9065a940962bf13da43c99bcc36cb111cc3c1a0d7477d4 GraphicsMagick-1.3.37.tar.xz -sha256 8a4d960c5a3e453ee21e459e1794c7a0c85559825d3363a8d3b510b3344fdad4 Copyright.txt +sha256 d60cd9db59351d2b9cb19beb443170acaa28f073d13d258f67b3627635e32675 GraphicsMagick-1.3.38.tar.xz +sha256 0a20e661de942ebe115a354d0ec6d1d42b93856ea765f813f350a5ce5024cdb7 Copyright.txt diff --git a/package/graphicsmagick/graphicsmagick.mk b/package/graphicsmagick/graphicsmagick.mk index 38743487eb..dbaa8ddf70 100644 --- a/package/graphicsmagick/graphicsmagick.mk +++ b/package/graphicsmagick/graphicsmagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRAPHICSMAGICK_VERSION = 1.3.37 +GRAPHICSMAGICK_VERSION = 1.3.38 GRAPHICSMAGICK_SOURCE = GraphicsMagick-$(GRAPHICSMAGICK_VERSION).tar.xz GRAPHICSMAGICK_SITE = https://downloads.sourceforge.net/project/graphicsmagick/graphicsmagick/$(GRAPHICSMAGICK_VERSION) GRAPHICSMAGICK_LICENSE = MIT From shorne at gmail.com Sat Oct 1 11:35:55 2022 From: shorne at gmail.com (Stafford Horne) Date: Sat, 1 Oct 2022 11:35:55 +0000 Subject: [Buildroot] [PATCH] or1k: Only define TARGET_HAVE_TLS when HAVE_AS_TLS In-Reply-To: <20220929145740.4846-1-shorne@gmail.com> References: <20220929145740.4846-1-shorne@gmail.com> Message-ID: On Thu, Sep 29, 2022 at 03:57:40PM +0100, Stafford Horne wrote: > This was found when testing buildroot with linuxthreads enabled. In > this case, the build passes --disable-tls to the toolchain during > configuration. After building the OpenRISC toolchain it was still > generating TLS code sequences and causing linker failures such as: > > ..../or1k-buildroot-linux-uclibc-gcc -o gpsd-3.24/gpsctl .... -lusb-1.0 -lm -lrt -lnsl > ..../ld: ..../sysroot/usr/lib/libusb-1.0.so: undefined reference to `__tls_get_addr' > > This patch fixes this by disabling tls for the OpenRISC target when requested > via --disable-tls. > > Tested-by: Yann E. MORIN > > gcc/ChangeLog: > > * config/or1k/or1k.cc (TARGET_HAVE_TLS): Only define if > HAVE_AS_TLS is defined. I have pushed this upstream now. Adding buildroot patches should be easy to do now. -Stafford From yann.morin.1998 at free.fr Sat Oct 1 15:56:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 17:56:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <20221001020445.1458953-1-buildroot@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> Message-ID: <20221001155615.GA30794@scaer> Athaariq, All, On 2022-10-01 02:05 +0000, Athaariq Ardhiansyah spake thusly: > Temporary fix for buildroot-specific bug. How is this a buildroot-specific bug? Can you elaborate on that part? If it is really a buildroot-related bug, then we want to understand it, and fix it, not work around it. > Ideally, we should install linux-headers first then glibc. Is this actually possible on Buildroot? This is exactly what we are doing already, and for as long as Buildroot has supported building a glibc-ased toolchain, as the kernel headers are required to build glibc; see package/glibc/glibc.mk at 28: 26 # Before glibc is configured, we must have the first stage 27 # cross-compiler and the kernel headers 28 GLIBC_DEPENDENCIES = host-gcc-initial linux-headers host-bison host-gawk \ > If yes, then we can also fix bug #15021 simultaneously if linux-headers being installed first as possible. This part does not apply (or makes sense), as linux headers *are* installed before glibc is even configured. This issue is really weird, because the glibc commit we are using is supposed to contain the related fixes: $ git los --oneline 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 2628500f5d m68k: Enforce 4-byte alignment on internal locks (BZ #29537) [...] 3bd3c612e9 Linux: Fix enum fsconfig_command detection in bb1e8b0ca9 linux: Fix sys/mount.h usage with kernel headers d48813227b linux: Use compile_c_snippet to check linux/mount.h availability (There are two new commits on the release/2.36/master branch, but they seem unrelated to the issue: 76e05613ee (origin/release/2.36/master) stdlib: Fix __getrandom_nocancel type and arc4random usage (BZ #29638) 227c903587 get_nscd_addresses: Fix subscript typos [BZ #29605] ) To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc 2.36 commit, and even one older than ours, but they do not seem to have issues. So, we'd like to understand why this is causing an issue for us. Hence, if you could elaborate on the firt part of your message, above, that would be extermely useful! Regards, Yann E. MORIN. > Signed-off-by: Athaariq Ardhiansyah > --- > .../0002-fsconfig_command-workaround.patch | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 package/glibc/0002-fsconfig_command-workaround.patch > > diff --git a/package/glibc/0002-fsconfig_command-workaround.patch b/package/glibc/0002-fsconfig_command-workaround.patch > new file mode 100644 > index 0000000000..27dd25b244 > --- /dev/null > +++ b/package/glibc/0002-fsconfig_command-workaround.patch > @@ -0,0 +1,17 @@ > +diff --git a/sysdeps/unix/sysv/linux/sys/mount.h b/sysdeps/unix/sysv/linux/sys/mount.h > +index 19841d0738..43a681d097 100644 > +--- a/sysdeps/unix/sysv/linux/sys/mount.h > ++++ b/sysdeps/unix/sysv/linux/sys/mount.h > +@@ -27,11 +27,7 @@ > + #include > + #include > + > +-#ifdef __has_include > +-# if __has_include ("linux/mount.h") > +-# include "linux/mount.h" > +-# endif > +-#endif > ++#include "linux/mount.h" > + > + > + #define BLOCK_SIZE_BITS 10 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:10:52 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:10:52 +0200 Subject: [Buildroot] [git commit] ltp-testsuite: bump version to 20220930 Message-ID: <20221001161129.E687E8628C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=40c160f5300642379c1c25945301b0eb99237532 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Remove all patches from this release. Signed-off-by: Petr Vorel Signed-off-by: Yann E. MORIN --- .../0002-kvm-Fix-compilation-on-x86.patch | 40 ------ ...x-undefined-reference-to-__stack_chk_fail.patch | 41 ------ ...004-nfs05_make_tree-Restore-5-min-timeout.patch | 31 ----- ...lls-migrate_pages03-restore-runtime-to-5m.patch | 44 ------ ...1-3-wait-for-umount-completed-in-thread_b.patch | 63 --------- .../0007-netstress-Restore-runtime-to-5m.patch | 53 ------- ...ss-Fix-usage-of-variables-from-tst_net.sh.patch | 154 --------------------- ...ional-Fix-usage-of-PAGESIZE-from-memcg_li.patch | 121 ---------------- package/ltp-testsuite/ltp-testsuite.hash | 6 +- package/ltp-testsuite/ltp-testsuite.mk | 2 +- 10 files changed, 4 insertions(+), 551 deletions(-) diff --git a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch b/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch deleted file mode 100644 index 0dfa652eb5..0000000000 --- a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch +++ /dev/null @@ -1,40 +0,0 @@ -From: Petr Vorel -Date: Mon, 6 Jun 2022 20:43:19 +0200 -Subject: [PATCH] kvm: Fix compilation on x86 - -Buildroot supports i386 pentium toolchains (br-i386-pentium-mmx-musl, -br-i386-pentium4-full) which fail to compile because as is run without --32. - -[ upstream status: a471d87ef ("kvm: Fix compilation on x86") ] - -Suggested-by: Martin Doucha -Reviewed-by: Cyril Hrubis -Signed-off-by: Petr Vorel ---- - testcases/kernel/kvm/Makefile | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile -index adab56952..8d5193d8e 100644 ---- a/testcases/kernel/kvm/Makefile -+++ b/testcases/kernel/kvm/Makefile -@@ -17,11 +17,14 @@ FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 - ifeq ($(HOST_CPU),x86_64) - ifneq (,$(findstring m32,$(CFLAGS))) - HOST_CPU = x86 -- GUEST_CFLAGS += -m32 -- ASFLAGS += --32 - endif - endif - -+ifeq ($(HOST_CPU),x86) -+ GUEST_CFLAGS += -m32 -+ ASFLAGS += --32 -+endif -+ - # Some distros enable -pie by default. That breaks KVM payload linking. - ifdef LTP_CFLAGS_NOPIE - GUEST_CFLAGS += -fno-pie --- -2.36.1 - diff --git a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch b/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch deleted file mode 100644 index 07b17d9e4b..0000000000 --- a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: Petr Vorel -Date: Fri, 10 Jun 2022 09:13:09 +0200 -Subject: [PATCH] kvm: Fix undefined reference to __stack_chk_fail() - -Some x86_64 buildroot toolchains (bootlin-x86-64-glibc, -bootlin-x86-64-musl) try to link to __stack_chk_fail(). --nostdlib is not enough, it requires also -fno-stack-protector. - -x86_64-buildroot-linux-gnu/bin/ld: /tmp/ccgBXEoR.o: in function `handle_page_fault': -kvm_pagefault01.c:(.text+0x5d): undefined reference to `__stack_chk_fail' -collect2: error: ld returned 1 exit status - -[ upstream status: 1a51aa710 ("kvm: Fix undefined reference to __stack_chk_fail()") ] - -Suggested-by: Martin Doucha -Reviewed-by: Cyril Hrubis -Reviewed-by: Martin Doucha -Reviewed-by: Thomas Petazzoni -Reviewed-by: Joerg Vehlow -Tested-by: Joerg Vehlow -Signed-off-by: Petr Vorel ---- - testcases/kernel/kvm/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile -index 8d5193d8e..c5a09719c 100644 ---- a/testcases/kernel/kvm/Makefile -+++ b/testcases/kernel/kvm/Makefile -@@ -9,7 +9,7 @@ ASFLAGS = - CPPFLAGS += -I$(abs_srcdir)/include - GUEST_CPPFLAGS = $(CPPFLAGS) -DCOMPILE_PAYLOAD - GUEST_CFLAGS = -ffreestanding -O2 -Wall -fno-asynchronous-unwind-tables -mno-mmx -mno-sse --GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -+GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -fno-stack-protector - GUEST_LDLIBS = - - FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 --- -2.36.1 - diff --git a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch b/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch deleted file mode 100644 index c12449d814..0000000000 --- a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 463da729537faa6d5ef206912fdec871c1059dac Mon Sep 17 00:00:00 2001 -From: Petr Vorel -Date: Thu, 16 Jun 2022 16:33:31 +0200 -Subject: [PATCH] nfs05_make_tree: Restore 5 min timeout - -nfs05_make_tree is a long running test. The previous default timeout 5 -min was enough after reducing runtime in 05be61cf6. - -But the new default 30 sec introduced in the concept of max runtime is -definitely not enough. Restore the previous timeout 5 min. - -Signed-off-by: Petr Vorel - -[ upstream status: 463da729537faa6d5ef206912fdec871c1059dac ] ---- - testcases/network/nfs/nfs_stress/nfs05_make_tree.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -index fdc13bd5d..5456c1bf0 100644 ---- a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -+++ b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c -@@ -215,4 +215,5 @@ static struct tst_test test = { - .options = opts, - .test_all = do_test, - .setup = setup, -+ .max_runtime = 300, - }; --- -2.37.1 - diff --git a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch b/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch deleted file mode 100644 index 8229f98d26..0000000000 --- a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 9fb28002bb2ce988b99d1756ff7b902f76e3472a Mon Sep 17 00:00:00 2001 -From: Jan Stancek -Date: Tue, 21 Jun 2022 10:37:17 +0200 -Subject: [PATCH] syscalls/migrate_pages03: restore runtime to 5m - -Arches with large pages have trouble completing all loops in 30s, -restore runtime to 5m. Also check for remaining runtime and -exit if we run out. - -Signed-off-by: Jan Stancek -Reviewed-by: Cyril Hrubis -Signed-off-by: Li Wang -[ upstream status: 9fb28002bb2ce988b99d1756ff7b902f76e3472a ] ---- - testcases/kernel/syscalls/migrate_pages/migrate_pages03.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -index c6afb4cce..2866c96e6 100644 ---- a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -+++ b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c -@@ -127,6 +127,11 @@ static void migrate_test(void) - tst_res(TFAIL | TERRNO, "migrate_pages() failed"); - return; - } -+ -+ if (!tst_remaining_runtime()) { -+ tst_res(TINFO, "Out of runtime, exitting..."); -+ break; -+ } - } - SAFE_SETEUID(0); - -@@ -134,6 +139,7 @@ static void migrate_test(void) - } - - static struct tst_test test = { -+ .max_runtime = 300, - .min_kver = "2.6.32", - .needs_root = 1, - .setup = setup, --- -2.37.1 - diff --git a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch b/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch deleted file mode 100644 index 73904806fd..0000000000 --- a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 6d4c8343d33e7d8fa059246310413f029a9e8573 Mon Sep 17 00:00:00 2001 -From: Li Wang -Date: Thu, 7 Jul 2022 17:38:45 +0800 -Subject: [PATCH] mountns0[1-3]: wait for umount completed in thread_b - -To get rid of race condition (occurs with umount_folders): - - mountns01.c:42: TPASS: shared mount in parent passed - mountns01.c:83: TPASS: shared mount in child passed - tst_device.c:394: TWARN: umount('B') failed with EINVAL - mountns.h:39: TWARN: umount(B) failed: EINVAL (22) - -Signed-off-by: Li Wang -Reviewed-by: Yang Xu -[ upstream status: 6d4c8343d33e7d8fa059246310413f029a9e8573 ] ---- - testcases/kernel/containers/mountns/mountns01.c | 2 ++ - testcases/kernel/containers/mountns/mountns02.c | 2 ++ - testcases/kernel/containers/mountns/mountns03.c | 2 ++ - 3 files changed, 6 insertions(+) - -diff --git a/testcases/kernel/containers/mountns/mountns01.c b/testcases/kernel/containers/mountns/mountns01.c -index e99134aba..e8f176920 100644 ---- a/testcases/kernel/containers/mountns/mountns01.c -+++ b/testcases/kernel/containers/mountns/mountns01.c -@@ -86,6 +86,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - -diff --git a/testcases/kernel/containers/mountns/mountns02.c b/testcases/kernel/containers/mountns/mountns02.c -index 258b61217..4b85fa79b 100644 ---- a/testcases/kernel/containers/mountns/mountns02.c -+++ b/testcases/kernel/containers/mountns/mountns02.c -@@ -87,6 +87,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - -diff --git a/testcases/kernel/containers/mountns/mountns03.c b/testcases/kernel/containers/mountns/mountns03.c -index f37ae7902..1d26a25d8 100644 ---- a/testcases/kernel/containers/mountns/mountns03.c -+++ b/testcases/kernel/containers/mountns/mountns03.c -@@ -97,6 +97,8 @@ static void run(void) - - TST_CHECKPOINT_WAKE(0); - -+ SAFE_WAIT(NULL); -+ - SAFE_UMOUNT(DIRA); - } - --- -2.37.1 - diff --git a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch b/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch deleted file mode 100644 index acaccf1e1f..0000000000 --- a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch +++ /dev/null @@ -1,53 +0,0 @@ -From cc4a27c235d0cf69a55cd8829b232566b0223333 Mon Sep 17 00:00:00 2001 -From: Petr Vorel -Date: Wed, 13 Jul 2022 09:46:14 +0200 -Subject: [PATCH] netstress: Restore runtime to 5m - -netstress requires the previous default timeout 5m due longer timeout -for higher message sizes (e.g. 65535): - -./sctp_ipsec.sh -6 -p comp -m transport -s 100:1000:65535:R65535 -sctp_ipsec 1 TPASS: netstress passed, median time 5 ms, data: 5 9 6 5 5 -sctp_ipsec 2 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' -sctp_ipsec 2 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 1000 -N 1000 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times -sctp_ipsec 2 TPASS: netstress passed, median time 6 ms, data: 8 6 6 5 6 -sctp_ipsec 3 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' -sctp_ipsec 3 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 65535 -N 65535 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times -sctp_ipsec 3 TWARN: netstress failed, ret: 2 -tst_test.c:1526: TINFO: Timeout per run is 0h 00m 30s -netstress.c:896: TINFO: IP_BIND_ADDRESS_NO_PORT is used -netstress.c:898: TINFO: connection: addr 'fd00:1:1:1::1', port '55097' -netstress.c:900: TINFO: client max req: 100 -netstress.c:901: TINFO: clients num: 2 -netstress.c:906: TINFO: client msg size: 65535 -netstress.c:907: TINFO: server msg size: 65535 -netstress.c:979: TINFO: SCTP client -netstress.c:475: TINFO: Running the test over IPv6 -Test timeouted, sending SIGKILL! -tst_test.c:1577: TINFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 -tst_test.c:1579: TBROK: Test killed! (timeout?) - -Converting netstress.c to use TST_NO_DEFAULT_MAIN (i.e. implementing main) -would require more changes, because it uses .forks_child, .needs_checkpoints, -cleanup function. - -Signed-off-by: Petr Vorel -[ upstream status: cc4a27c235d0cf69a55cd8829b232566b0223333 ] ---- - testcases/network/netstress/netstress.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/testcases/network/netstress/netstress.c b/testcases/network/netstress/netstress.c -index 6c9e83112..7c222531d 100644 ---- a/testcases/network/netstress/netstress.c -+++ b/testcases/network/netstress/netstress.c -@@ -1028,5 +1028,6 @@ static struct tst_test test = { - {"B:", &server_bg, "Run in background, arg is the process directory"}, - {} - }, -+ .max_runtime = 300, - .needs_checkpoints = 1, - }; --- -2.37.1 - diff --git a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch b/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch deleted file mode 100644 index ba187366ff..0000000000 --- a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch +++ /dev/null @@ -1,154 +0,0 @@ -From 33c156e295e35d4839a135d8ba5db485b7712ced Mon Sep 17 00:00:00 2001 -From: Joerg Vehlow -Date: Mon, 27 Jun 2022 09:27:09 +0200 -Subject: [PATCH] net_stress: Fix usage of variables from tst_net.sh - -These tests use variables (NS_TIMES, IP_TOTAL, ROUTE_TOTAL -and IF_UPDOWN_TIMES) from tst_net.sh, before sourcing it. - -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") - -Reviewed-by: Petr Vorel -Signed-off-by: Joerg Vehlow -[ upstream status: 33c156e295e35d4839a135d8ba5db485b7712ced ] ---- - testcases/network/stress/interface/if-addr-adddel.sh | 7 ++++--- - testcases/network/stress/interface/if-addr-addlarge.sh | 7 ++++--- - testcases/network/stress/interface/if-route-adddel.sh | 5 +++-- - testcases/network/stress/interface/if-route-addlarge.sh | 5 +++-- - testcases/network/stress/interface/if-updown.sh | 5 +++-- - testcases/network/stress/interface/if4-addr-change.sh | 4 +++- - 6 files changed, 20 insertions(+), 13 deletions(-) - -diff --git a/testcases/network/stress/interface/if-addr-adddel.sh b/testcases/network/stress/interface/if-addr-adddel.sh -index cb453e612..0750501f0 100755 ---- a/testcases/network/stress/interface/if-addr-adddel.sh -+++ b/testcases/network/stress/interface/if-addr-adddel.sh -@@ -7,9 +7,6 @@ - - IF_CMD='ifconfig' - --# The interval of the check interface activity --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -89,4 +86,8 @@ test_body() - } - - . if-lib.sh -+ -+# The interval of the check interface activity -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-addr-addlarge.sh b/testcases/network/stress/interface/if-addr-addlarge.sh -index 3c876c17d..d0759c86b 100755 ---- a/testcases/network/stress/interface/if-addr-addlarge.sh -+++ b/testcases/network/stress/interface/if-addr-addlarge.sh -@@ -7,9 +7,6 @@ - - IF_CMD='ifconfig' - --# The interval of the check interface activity --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -110,4 +107,8 @@ test_body() - } - - . if-lib.sh -+ -+# The interval of the check interface activity -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-route-adddel.sh b/testcases/network/stress/interface/if-route-adddel.sh -index b50da268a..51445e4f7 100755 ---- a/testcases/network/stress/interface/if-route-adddel.sh -+++ b/testcases/network/stress/interface/if-route-adddel.sh -@@ -7,8 +7,6 @@ - - IF_CMD='route' - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -64,4 +62,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-route-addlarge.sh b/testcases/network/stress/interface/if-route-addlarge.sh -index 7d09d1216..355b6b4ab 100755 ---- a/testcases/network/stress/interface/if-route-addlarge.sh -+++ b/testcases/network/stress/interface/if-route-addlarge.sh -@@ -7,8 +7,6 @@ - - IF_CMD='route' - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -76,4 +74,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if-updown.sh b/testcases/network/stress/interface/if-updown.sh -index 9a5709c85..71c78d785 100755 ---- a/testcases/network/stress/interface/if-updown.sh -+++ b/testcases/network/stress/interface/if-updown.sh -@@ -8,8 +8,6 @@ - IF_CMD='ifconfig' - TST_CLEANUP="if_cleanup_restore" - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} -- - test_body() - { - local cmd="$CMD" -@@ -47,4 +45,7 @@ test_body() - } - - . if-lib.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} -+ - tst_run -diff --git a/testcases/network/stress/interface/if4-addr-change.sh b/testcases/network/stress/interface/if4-addr-change.sh -index b9ece2af9..f162e6a51 100755 ---- a/testcases/network/stress/interface/if4-addr-change.sh -+++ b/testcases/network/stress/interface/if4-addr-change.sh -@@ -9,7 +9,6 @@ TST_CLEANUP="do_cleanup" - TST_TESTFUNC="test_body" - TST_NEEDS_CMDS="ifconfig" - --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} - # Maximum host portion of the IPv4 address on the local host - LHOST_IPV4_HOST_MAX="254" - -@@ -61,4 +60,7 @@ test_body() - } - - . tst_net.sh -+ -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} -+ - tst_run --- -2.37.1 - diff --git a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch b/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch deleted file mode 100644 index 6cc36cda79..0000000000 --- a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch +++ /dev/null @@ -1,121 +0,0 @@ -From bda92ad659a52d38ac810099f69adff626b064c6 Mon Sep 17 00:00:00 2001 -From: Joerg Vehlow -Date: Mon, 27 Jun 2022 10:44:49 +0200 -Subject: [PATCH] memcg/functional: Fix usage of PAGESIZE from memcg_lib.sh - -$PAGESIZES is set in memcg_lib.sh, which was moved to the bottom of the file. - -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") - -Reviewed-by: Petr Vorel -Signed-off-by: Joerg Vehlow -[ upstream status: bda92ad659a52d38ac810099f69adff626b064c6 ] ---- - .../controllers/memcg/functional/memcg_failcnt.sh | 7 ++++--- - .../memcg/functional/memcg_max_usage_in_bytes_test.sh | 10 +++++----- - .../memcg/functional/memcg_subgroup_charge.sh | 8 ++++---- - .../memcg/functional/memcg_usage_in_bytes_test.sh | 10 +++++----- - 4 files changed, 18 insertions(+), 17 deletions(-) - -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -index 1fed01569..1be98a056 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh -@@ -12,9 +12,6 @@ MEMCG_TESTFUNC=test - MEMCG_SHMMAX=1 - TST_TEST_DATA="--mmap-anon --mmap-file --shm" - --MEMORY_LIMIT=$PAGESIZE --MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) -- - test() - { - ROD echo $MEMORY_LIMIT \> memory.limit_in_bytes -@@ -36,4 +33,8 @@ test() - } - - . memcg_lib.sh -+ -+MEMORY_LIMIT=$PAGESIZE -+MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -index d1ffbe053..302810513 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh -@@ -9,11 +9,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=4 - -- --MEM_TO_ALLOC=$((PAGESIZE * 1024)) --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -- - # Run test cases which checks memory.[memsw.]max_usage_in_bytes after make - # some memory allocation - test_max_usage_in_bytes() -@@ -88,4 +83,9 @@ test4() - } - - . memcg_lib.sh -+ -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -index 08b6697d4..9bcc01258 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh -@@ -12,10 +12,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=3 - -- --# Allocate memory bigger than per-cpu kernel memory --MEM_TO_ALLOC=$((PAGESIZES * 2)) -- - # Test the memory charge won't move to subgroup - # $1 - memory.limit_in_bytes in sub group - test_subgroup() -@@ -67,4 +63,8 @@ test3() - } - - . memcg_lib.sh -+ -+# Allocate memory bigger than per-cpu kernel memory -+MEM_TO_ALLOC=$((PAGESIZES * 2)) -+ - tst_run -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -index 6f932124e..125d88e55 100755 ---- a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -+++ b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh -@@ -9,11 +9,6 @@ - MEMCG_TESTFUNC=test - TST_CNT=2 - -- --MEM_TO_ALLOC=$((PAGESIZE * 1024)) --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -- - test1() - { - tst_res TINFO "Test memory.usage_in_bytes" -@@ -35,4 +30,9 @@ test2() - } - - . memcg_lib.sh -+ -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) -+ - tst_run --- -2.37.1 - diff --git a/package/ltp-testsuite/ltp-testsuite.hash b/package/ltp-testsuite/ltp-testsuite.hash index e13661c08c..8b411a8ffe 100644 --- a/package/ltp-testsuite/ltp-testsuite.hash +++ b/package/ltp-testsuite/ltp-testsuite.hash @@ -1,5 +1,5 @@ -# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.xz.sha1 -sha1 9741b6938ca79ad1f4bea32788a483f86d12fd65 ltp-full-20220527.tar.xz +# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.bz2.sha1 +sha1 c8d658cd3ab1f5a5c7b5bf56398d3a9525012c6b ltp-full-20220930.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING -sha256 d635afb5ec7b0de763ab50713baf9fbf65cf089da6e6768f816e4a166cbd17c4 ltp-full-20220527.tar.xz +sha256 533ab63915b916640667ecce17ee4998006d80d394d4b1f1d105a7aa1df50d38 ltp-full-20220930.tar.xz diff --git a/package/ltp-testsuite/ltp-testsuite.mk b/package/ltp-testsuite/ltp-testsuite.mk index 23be3d25c9..34412d562f 100644 --- a/package/ltp-testsuite/ltp-testsuite.mk +++ b/package/ltp-testsuite/ltp-testsuite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LTP_TESTSUITE_VERSION = 20220527 +LTP_TESTSUITE_VERSION = 20220930 LTP_TESTSUITE_SOURCE = ltp-full-$(LTP_TESTSUITE_VERSION).tar.xz LTP_TESTSUITE_SITE = https://github.com/linux-test-project/ltp/releases/download/$(LTP_TESTSUITE_VERSION) From yann.morin.1998 at free.fr Sat Oct 1 16:11:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:11:44 +0200 Subject: [Buildroot] [PATCH 1/1] ltp-testsuite: bump version to 20220930 In-Reply-To: <20220930181741.8749-1-pevik@seznam.cz> References: <20220930181741.8749-1-pevik@seznam.cz> Message-ID: <20221001161144.GB30794@scaer> Petr, All, On 2022-09-30 20:17 +0200, Petr Vorel spake thusly: > From: Petr Vorel > > Remove all patches from this release. > > Signed-off-by: Petr Vorel Applied to master, thanks. > --- > .../0002-kvm-Fix-compilation-on-x86.patch | 40 ----- > ...efined-reference-to-__stack_chk_fail.patch | 41 ----- > ...fs05_make_tree-Restore-5-min-timeout.patch | 31 ---- > ...igrate_pages03-restore-runtime-to-5m.patch | 44 ----- > ...ait-for-umount-completed-in-thread_b.patch | 63 ------- > ...0007-netstress-Restore-runtime-to-5m.patch | 53 ------ > ...x-usage-of-variables-from-tst_net.sh.patch | 154 ------------------ > ...-Fix-usage-of-PAGESIZE-from-memcg_li.patch | 121 -------------- > package/ltp-testsuite/ltp-testsuite.hash | 6 +- > package/ltp-testsuite/ltp-testsuite.mk | 2 +- > 10 files changed, 4 insertions(+), 551 deletions(-) > delete mode 100644 package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > delete mode 100644 package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > delete mode 100644 package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > delete mode 100644 package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > delete mode 100644 package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > delete mode 100644 package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > delete mode 100644 package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > delete mode 100644 package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > > diff --git a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch b/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > deleted file mode 100644 > index 0dfa652eb5..0000000000 > --- a/package/ltp-testsuite/0002-kvm-Fix-compilation-on-x86.patch > +++ /dev/null > @@ -1,40 +0,0 @@ > -From: Petr Vorel > -Date: Mon, 6 Jun 2022 20:43:19 +0200 > -Subject: [PATCH] kvm: Fix compilation on x86 > - > -Buildroot supports i386 pentium toolchains (br-i386-pentium-mmx-musl, > -br-i386-pentium4-full) which fail to compile because as is run without --32. > - > -[ upstream status: a471d87ef ("kvm: Fix compilation on x86") ] > - > -Suggested-by: Martin Doucha > -Reviewed-by: Cyril Hrubis > -Signed-off-by: Petr Vorel > ---- > - testcases/kernel/kvm/Makefile | 7 +++++-- > - 1 file changed, 5 insertions(+), 2 deletions(-) > - > -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile > -index adab56952..8d5193d8e 100644 > ---- a/testcases/kernel/kvm/Makefile > -+++ b/testcases/kernel/kvm/Makefile > -@@ -17,11 +17,14 @@ FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 > - ifeq ($(HOST_CPU),x86_64) > - ifneq (,$(findstring m32,$(CFLAGS))) > - HOST_CPU = x86 > -- GUEST_CFLAGS += -m32 > -- ASFLAGS += --32 > - endif > - endif > - > -+ifeq ($(HOST_CPU),x86) > -+ GUEST_CFLAGS += -m32 > -+ ASFLAGS += --32 > -+endif > -+ > - # Some distros enable -pie by default. That breaks KVM payload linking. > - ifdef LTP_CFLAGS_NOPIE > - GUEST_CFLAGS += -fno-pie > --- > -2.36.1 > - > diff --git a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch b/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > deleted file mode 100644 > index 07b17d9e4b..0000000000 > --- a/package/ltp-testsuite/0003-kvm-Fix-undefined-reference-to-__stack_chk_fail.patch > +++ /dev/null > @@ -1,41 +0,0 @@ > -From: Petr Vorel > -Date: Fri, 10 Jun 2022 09:13:09 +0200 > -Subject: [PATCH] kvm: Fix undefined reference to __stack_chk_fail() > - > -Some x86_64 buildroot toolchains (bootlin-x86-64-glibc, > -bootlin-x86-64-musl) try to link to __stack_chk_fail(). > --nostdlib is not enough, it requires also -fno-stack-protector. > - > -x86_64-buildroot-linux-gnu/bin/ld: /tmp/ccgBXEoR.o: in function `handle_page_fault': > -kvm_pagefault01.c:(.text+0x5d): undefined reference to `__stack_chk_fail' > -collect2: error: ld returned 1 exit status > - > -[ upstream status: 1a51aa710 ("kvm: Fix undefined reference to __stack_chk_fail()") ] > - > -Suggested-by: Martin Doucha > -Reviewed-by: Cyril Hrubis > -Reviewed-by: Martin Doucha > -Reviewed-by: Thomas Petazzoni > -Reviewed-by: Joerg Vehlow > -Tested-by: Joerg Vehlow > -Signed-off-by: Petr Vorel > ---- > - testcases/kernel/kvm/Makefile | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/testcases/kernel/kvm/Makefile b/testcases/kernel/kvm/Makefile > -index 8d5193d8e..c5a09719c 100644 > ---- a/testcases/kernel/kvm/Makefile > -+++ b/testcases/kernel/kvm/Makefile > -@@ -9,7 +9,7 @@ ASFLAGS = > - CPPFLAGS += -I$(abs_srcdir)/include > - GUEST_CPPFLAGS = $(CPPFLAGS) -DCOMPILE_PAYLOAD > - GUEST_CFLAGS = -ffreestanding -O2 -Wall -fno-asynchronous-unwind-tables -mno-mmx -mno-sse > --GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none > -+GUEST_LDFLAGS = -nostdlib -Wl,--build-id=none -fno-stack-protector > - GUEST_LDLIBS = > - > - FILTER_OUT_MAKE_TARGETS := lib_guest lib_host lib_x86 > --- > -2.36.1 > - > diff --git a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch b/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > deleted file mode 100644 > index c12449d814..0000000000 > --- a/package/ltp-testsuite/0004-nfs05_make_tree-Restore-5-min-timeout.patch > +++ /dev/null > @@ -1,31 +0,0 @@ > -From 463da729537faa6d5ef206912fdec871c1059dac Mon Sep 17 00:00:00 2001 > -From: Petr Vorel > -Date: Thu, 16 Jun 2022 16:33:31 +0200 > -Subject: [PATCH] nfs05_make_tree: Restore 5 min timeout > - > -nfs05_make_tree is a long running test. The previous default timeout 5 > -min was enough after reducing runtime in 05be61cf6. > - > -But the new default 30 sec introduced in the concept of max runtime is > -definitely not enough. Restore the previous timeout 5 min. > - > -Signed-off-by: Petr Vorel > - > -[ upstream status: 463da729537faa6d5ef206912fdec871c1059dac ] > ---- > - testcases/network/nfs/nfs_stress/nfs05_make_tree.c | 1 + > - 1 file changed, 1 insertion(+) > - > -diff --git a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -index fdc13bd5d..5456c1bf0 100644 > ---- a/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -+++ b/testcases/network/nfs/nfs_stress/nfs05_make_tree.c > -@@ -215,4 +215,5 @@ static struct tst_test test = { > - .options = opts, > - .test_all = do_test, > - .setup = setup, > -+ .max_runtime = 300, > - }; > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch b/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > deleted file mode 100644 > index 8229f98d26..0000000000 > --- a/package/ltp-testsuite/0005-syscalls-migrate_pages03-restore-runtime-to-5m.patch > +++ /dev/null > @@ -1,44 +0,0 @@ > -From 9fb28002bb2ce988b99d1756ff7b902f76e3472a Mon Sep 17 00:00:00 2001 > -From: Jan Stancek > -Date: Tue, 21 Jun 2022 10:37:17 +0200 > -Subject: [PATCH] syscalls/migrate_pages03: restore runtime to 5m > - > -Arches with large pages have trouble completing all loops in 30s, > -restore runtime to 5m. Also check for remaining runtime and > -exit if we run out. > - > -Signed-off-by: Jan Stancek > -Reviewed-by: Cyril Hrubis > -Signed-off-by: Li Wang > -[ upstream status: 9fb28002bb2ce988b99d1756ff7b902f76e3472a ] > ---- > - testcases/kernel/syscalls/migrate_pages/migrate_pages03.c | 6 ++++++ > - 1 file changed, 6 insertions(+) > - > -diff --git a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -index c6afb4cce..2866c96e6 100644 > ---- a/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -+++ b/testcases/kernel/syscalls/migrate_pages/migrate_pages03.c > -@@ -127,6 +127,11 @@ static void migrate_test(void) > - tst_res(TFAIL | TERRNO, "migrate_pages() failed"); > - return; > - } > -+ > -+ if (!tst_remaining_runtime()) { > -+ tst_res(TINFO, "Out of runtime, exitting..."); > -+ break; > -+ } > - } > - SAFE_SETEUID(0); > - > -@@ -134,6 +139,7 @@ static void migrate_test(void) > - } > - > - static struct tst_test test = { > -+ .max_runtime = 300, > - .min_kver = "2.6.32", > - .needs_root = 1, > - .setup = setup, > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch b/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > deleted file mode 100644 > index 73904806fd..0000000000 > --- a/package/ltp-testsuite/0006-mountns0-1-3-wait-for-umount-completed-in-thread_b.patch > +++ /dev/null > @@ -1,63 +0,0 @@ > -From 6d4c8343d33e7d8fa059246310413f029a9e8573 Mon Sep 17 00:00:00 2001 > -From: Li Wang > -Date: Thu, 7 Jul 2022 17:38:45 +0800 > -Subject: [PATCH] mountns0[1-3]: wait for umount completed in thread_b > - > -To get rid of race condition (occurs with umount_folders): > - > - mountns01.c:42: TPASS: shared mount in parent passed > - mountns01.c:83: TPASS: shared mount in child passed > - tst_device.c:394: TWARN: umount('B') failed with EINVAL > - mountns.h:39: TWARN: umount(B) failed: EINVAL (22) > - > -Signed-off-by: Li Wang > -Reviewed-by: Yang Xu > -[ upstream status: 6d4c8343d33e7d8fa059246310413f029a9e8573 ] > ---- > - testcases/kernel/containers/mountns/mountns01.c | 2 ++ > - testcases/kernel/containers/mountns/mountns02.c | 2 ++ > - testcases/kernel/containers/mountns/mountns03.c | 2 ++ > - 3 files changed, 6 insertions(+) > - > -diff --git a/testcases/kernel/containers/mountns/mountns01.c b/testcases/kernel/containers/mountns/mountns01.c > -index e99134aba..e8f176920 100644 > ---- a/testcases/kernel/containers/mountns/mountns01.c > -+++ b/testcases/kernel/containers/mountns/mountns01.c > -@@ -86,6 +86,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > -diff --git a/testcases/kernel/containers/mountns/mountns02.c b/testcases/kernel/containers/mountns/mountns02.c > -index 258b61217..4b85fa79b 100644 > ---- a/testcases/kernel/containers/mountns/mountns02.c > -+++ b/testcases/kernel/containers/mountns/mountns02.c > -@@ -87,6 +87,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > -diff --git a/testcases/kernel/containers/mountns/mountns03.c b/testcases/kernel/containers/mountns/mountns03.c > -index f37ae7902..1d26a25d8 100644 > ---- a/testcases/kernel/containers/mountns/mountns03.c > -+++ b/testcases/kernel/containers/mountns/mountns03.c > -@@ -97,6 +97,8 @@ static void run(void) > - > - TST_CHECKPOINT_WAKE(0); > - > -+ SAFE_WAIT(NULL); > -+ > - SAFE_UMOUNT(DIRA); > - } > - > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch b/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > deleted file mode 100644 > index acaccf1e1f..0000000000 > --- a/package/ltp-testsuite/0007-netstress-Restore-runtime-to-5m.patch > +++ /dev/null > @@ -1,53 +0,0 @@ > -From cc4a27c235d0cf69a55cd8829b232566b0223333 Mon Sep 17 00:00:00 2001 > -From: Petr Vorel > -Date: Wed, 13 Jul 2022 09:46:14 +0200 > -Subject: [PATCH] netstress: Restore runtime to 5m > - > -netstress requires the previous default timeout 5m due longer timeout > -for higher message sizes (e.g. 65535): > - > -./sctp_ipsec.sh -6 -p comp -m transport -s 100:1000:65535:R65535 > -sctp_ipsec 1 TPASS: netstress passed, median time 5 ms, data: 5 9 6 5 5 > -sctp_ipsec 2 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' > -sctp_ipsec 2 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 1000 -N 1000 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times > -sctp_ipsec 2 TPASS: netstress passed, median time 6 ms, data: 8 6 6 5 6 > -sctp_ipsec 3 TINFO: run server 'netstress -T sctp -S fd00:1:1:1::1 -D ltp_ns_veth1 -R 500000 -B /tmp/LTP_sctp_ipsec.ARZbGkvjPa' > -sctp_ipsec 3 TINFO: run client 'netstress -l -T sctp -H fd00:1:1:1::1 -n 65535 -N 65535 -S fd00:1:1:1::2 -D ltp_ns_veth2 -a 2 -r 100 -d /tmp/LTP_sctp_ipsec.ARZbGkvjPa/tst_netload.res' 5 times > -sctp_ipsec 3 TWARN: netstress failed, ret: 2 > -tst_test.c:1526: TINFO: Timeout per run is 0h 00m 30s > -netstress.c:896: TINFO: IP_BIND_ADDRESS_NO_PORT is used > -netstress.c:898: TINFO: connection: addr 'fd00:1:1:1::1', port '55097' > -netstress.c:900: TINFO: client max req: 100 > -netstress.c:901: TINFO: clients num: 2 > -netstress.c:906: TINFO: client msg size: 65535 > -netstress.c:907: TINFO: server msg size: 65535 > -netstress.c:979: TINFO: SCTP client > -netstress.c:475: TINFO: Running the test over IPv6 > -Test timeouted, sending SIGKILL! > -tst_test.c:1577: TINFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 > -tst_test.c:1579: TBROK: Test killed! (timeout?) > - > -Converting netstress.c to use TST_NO_DEFAULT_MAIN (i.e. implementing main) > -would require more changes, because it uses .forks_child, .needs_checkpoints, > -cleanup function. > - > -Signed-off-by: Petr Vorel > -[ upstream status: cc4a27c235d0cf69a55cd8829b232566b0223333 ] > ---- > - testcases/network/netstress/netstress.c | 1 + > - 1 file changed, 1 insertion(+) > - > -diff --git a/testcases/network/netstress/netstress.c b/testcases/network/netstress/netstress.c > -index 6c9e83112..7c222531d 100644 > ---- a/testcases/network/netstress/netstress.c > -+++ b/testcases/network/netstress/netstress.c > -@@ -1028,5 +1028,6 @@ static struct tst_test test = { > - {"B:", &server_bg, "Run in background, arg is the process directory"}, > - {} > - }, > -+ .max_runtime = 300, > - .needs_checkpoints = 1, > - }; > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch b/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > deleted file mode 100644 > index ba187366ff..0000000000 > --- a/package/ltp-testsuite/0008-net_stress-Fix-usage-of-variables-from-tst_net.sh.patch > +++ /dev/null > @@ -1,154 +0,0 @@ > -From 33c156e295e35d4839a135d8ba5db485b7712ced Mon Sep 17 00:00:00 2001 > -From: Joerg Vehlow > -Date: Mon, 27 Jun 2022 09:27:09 +0200 > -Subject: [PATCH] net_stress: Fix usage of variables from tst_net.sh > - > -These tests use variables (NS_TIMES, IP_TOTAL, ROUTE_TOTAL > -and IF_UPDOWN_TIMES) from tst_net.sh, before sourcing it. > - > -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") > - > -Reviewed-by: Petr Vorel > -Signed-off-by: Joerg Vehlow > -[ upstream status: 33c156e295e35d4839a135d8ba5db485b7712ced ] > ---- > - testcases/network/stress/interface/if-addr-adddel.sh | 7 ++++--- > - testcases/network/stress/interface/if-addr-addlarge.sh | 7 ++++--- > - testcases/network/stress/interface/if-route-adddel.sh | 5 +++-- > - testcases/network/stress/interface/if-route-addlarge.sh | 5 +++-- > - testcases/network/stress/interface/if-updown.sh | 5 +++-- > - testcases/network/stress/interface/if4-addr-change.sh | 4 +++- > - 6 files changed, 20 insertions(+), 13 deletions(-) > - > -diff --git a/testcases/network/stress/interface/if-addr-adddel.sh b/testcases/network/stress/interface/if-addr-adddel.sh > -index cb453e612..0750501f0 100755 > ---- a/testcases/network/stress/interface/if-addr-adddel.sh > -+++ b/testcases/network/stress/interface/if-addr-adddel.sh > -@@ -7,9 +7,6 @@ > - > - IF_CMD='ifconfig' > - > --# The interval of the check interface activity > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -89,4 +86,8 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+# The interval of the check interface activity > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-addr-addlarge.sh b/testcases/network/stress/interface/if-addr-addlarge.sh > -index 3c876c17d..d0759c86b 100755 > ---- a/testcases/network/stress/interface/if-addr-addlarge.sh > -+++ b/testcases/network/stress/interface/if-addr-addlarge.sh > -@@ -7,9 +7,6 @@ > - > - IF_CMD='ifconfig' > - > --# The interval of the check interface activity > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -110,4 +107,8 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+# The interval of the check interface activity > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IP_TOTAL / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-route-adddel.sh b/testcases/network/stress/interface/if-route-adddel.sh > -index b50da268a..51445e4f7 100755 > ---- a/testcases/network/stress/interface/if-route-adddel.sh > -+++ b/testcases/network/stress/interface/if-route-adddel.sh > -@@ -7,8 +7,6 @@ > - > - IF_CMD='route' > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -64,4 +62,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-route-addlarge.sh b/testcases/network/stress/interface/if-route-addlarge.sh > -index 7d09d1216..355b6b4ab 100755 > ---- a/testcases/network/stress/interface/if-route-addlarge.sh > -+++ b/testcases/network/stress/interface/if-route-addlarge.sh > -@@ -7,8 +7,6 @@ > - > - IF_CMD='route' > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -76,4 +74,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if-updown.sh b/testcases/network/stress/interface/if-updown.sh > -index 9a5709c85..71c78d785 100755 > ---- a/testcases/network/stress/interface/if-updown.sh > -+++ b/testcases/network/stress/interface/if-updown.sh > -@@ -8,8 +8,6 @@ > - IF_CMD='ifconfig' > - TST_CLEANUP="if_cleanup_restore" > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} > -- > - test_body() > - { > - local cmd="$CMD" > -@@ -47,4 +45,7 @@ test_body() > - } > - > - . if-lib.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))} > -+ > - tst_run > -diff --git a/testcases/network/stress/interface/if4-addr-change.sh b/testcases/network/stress/interface/if4-addr-change.sh > -index b9ece2af9..f162e6a51 100755 > ---- a/testcases/network/stress/interface/if4-addr-change.sh > -+++ b/testcases/network/stress/interface/if4-addr-change.sh > -@@ -9,7 +9,6 @@ TST_CLEANUP="do_cleanup" > - TST_TESTFUNC="test_body" > - TST_NEEDS_CMDS="ifconfig" > - > --CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > - # Maximum host portion of the IPv4 address on the local host > - LHOST_IPV4_HOST_MAX="254" > - > -@@ -61,4 +60,7 @@ test_body() > - } > - > - . tst_net.sh > -+ > -+CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))} > -+ > - tst_run > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch b/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > deleted file mode 100644 > index 6cc36cda79..0000000000 > --- a/package/ltp-testsuite/0009-memcg-functional-Fix-usage-of-PAGESIZE-from-memcg_li.patch > +++ /dev/null > @@ -1,121 +0,0 @@ > -From bda92ad659a52d38ac810099f69adff626b064c6 Mon Sep 17 00:00:00 2001 > -From: Joerg Vehlow > -Date: Mon, 27 Jun 2022 10:44:49 +0200 > -Subject: [PATCH] memcg/functional: Fix usage of PAGESIZE from memcg_lib.sh > - > -$PAGESIZES is set in memcg_lib.sh, which was moved to the bottom of the file. > - > -Fixes: 04021637f ("tst_test.sh: Cleanup getopts usage") > - > -Reviewed-by: Petr Vorel > -Signed-off-by: Joerg Vehlow > -[ upstream status: bda92ad659a52d38ac810099f69adff626b064c6 ] > ---- > - .../controllers/memcg/functional/memcg_failcnt.sh | 7 ++++--- > - .../memcg/functional/memcg_max_usage_in_bytes_test.sh | 10 +++++----- > - .../memcg/functional/memcg_subgroup_charge.sh | 8 ++++---- > - .../memcg/functional/memcg_usage_in_bytes_test.sh | 10 +++++----- > - 4 files changed, 18 insertions(+), 17 deletions(-) > - > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -index 1fed01569..1be98a056 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_failcnt.sh > -@@ -12,9 +12,6 @@ MEMCG_TESTFUNC=test > - MEMCG_SHMMAX=1 > - TST_TEST_DATA="--mmap-anon --mmap-file --shm" > - > --MEMORY_LIMIT=$PAGESIZE > --MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) > -- > - test() > - { > - ROD echo $MEMORY_LIMIT \> memory.limit_in_bytes > -@@ -36,4 +33,8 @@ test() > - } > - > - . memcg_lib.sh > -+ > -+MEMORY_LIMIT=$PAGESIZE > -+MEMORY_TO_ALLOCATE=$((MEMORY_LIMIT * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -index d1ffbe053..302810513 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_max_usage_in_bytes_test.sh > -@@ -9,11 +9,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=4 > - > -- > --MEM_TO_ALLOC=$((PAGESIZE * 1024)) > --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -- > - # Run test cases which checks memory.[memsw.]max_usage_in_bytes after make > - # some memory allocation > - test_max_usage_in_bytes() > -@@ -88,4 +83,9 @@ test4() > - } > - > - . memcg_lib.sh > -+ > -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) > -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -index 08b6697d4..9bcc01258 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_subgroup_charge.sh > -@@ -12,10 +12,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=3 > - > -- > --# Allocate memory bigger than per-cpu kernel memory > --MEM_TO_ALLOC=$((PAGESIZES * 2)) > -- > - # Test the memory charge won't move to subgroup > - # $1 - memory.limit_in_bytes in sub group > - test_subgroup() > -@@ -67,4 +63,8 @@ test3() > - } > - > - . memcg_lib.sh > -+ > -+# Allocate memory bigger than per-cpu kernel memory > -+MEM_TO_ALLOC=$((PAGESIZES * 2)) > -+ > - tst_run > -diff --git a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -index 6f932124e..125d88e55 100755 > ---- a/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -+++ b/testcases/kernel/controllers/memcg/functional/memcg_usage_in_bytes_test.sh > -@@ -9,11 +9,6 @@ > - MEMCG_TESTFUNC=test > - TST_CNT=2 > - > -- > --MEM_TO_ALLOC=$((PAGESIZE * 1024)) > --MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > --MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -- > - test1() > - { > - tst_res TINFO "Test memory.usage_in_bytes" > -@@ -35,4 +30,9 @@ test2() > - } > - > - . memcg_lib.sh > -+ > -+MEM_TO_ALLOC=$((PAGESIZE * 1024)) > -+MEM_EXPECTED_UPPER=$((MEM_TO_ALLOC + MEM_USAGE_RANGE)) > -+MEM_LIMIT=$((MEM_TO_ALLOC * 2)) > -+ > - tst_run > --- > -2.37.1 > - > diff --git a/package/ltp-testsuite/ltp-testsuite.hash b/package/ltp-testsuite/ltp-testsuite.hash > index e13661c08c..8b411a8ffe 100644 > --- a/package/ltp-testsuite/ltp-testsuite.hash > +++ b/package/ltp-testsuite/ltp-testsuite.hash > @@ -1,5 +1,5 @@ > -# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.xz.sha1 > -sha1 9741b6938ca79ad1f4bea32788a483f86d12fd65 ltp-full-20220527.tar.xz > +# From: https://github.com/linux-test-project/ltp/releases/download/20220527/ltp-full-20220527.tar.bz2.sha1 > +sha1 c8d658cd3ab1f5a5c7b5bf56398d3a9525012c6b ltp-full-20220930.tar.xz > # Locally computed > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > -sha256 d635afb5ec7b0de763ab50713baf9fbf65cf089da6e6768f816e4a166cbd17c4 ltp-full-20220527.tar.xz > +sha256 533ab63915b916640667ecce17ee4998006d80d394d4b1f1d105a7aa1df50d38 ltp-full-20220930.tar.xz > diff --git a/package/ltp-testsuite/ltp-testsuite.mk b/package/ltp-testsuite/ltp-testsuite.mk > index 23be3d25c9..34412d562f 100644 > --- a/package/ltp-testsuite/ltp-testsuite.mk > +++ b/package/ltp-testsuite/ltp-testsuite.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LTP_TESTSUITE_VERSION = 20220527 > +LTP_TESTSUITE_VERSION = 20220930 > LTP_TESTSUITE_SOURCE = ltp-full-$(LTP_TESTSUITE_VERSION).tar.xz > LTP_TESTSUITE_SITE = https://github.com/linux-test-project/ltp/releases/download/$(LTP_TESTSUITE_VERSION) > > -- > 2.37.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:13:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:13:57 +0200 Subject: [Buildroot] [git commit] package/fwts: enable for arm Message-ID: <20221001161523.0A1C6863EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6229a31f8d7e5e38a98055f2a99b4f74683b394c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The FWTS application and its associated kernel modules do build on arm; enable it. Signed-off-by: Vincent Stehl?? Cc: Erico Nunes [yann.morin.1998 at free.fr: introduce _ARCH_SUPPORTS, sort alphabetically] Signed-off-by: Yann E. MORIN --- package/fwts/Config.in | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/package/fwts/Config.in b/package/fwts/Config.in index ac9a2e3909..08608d1dd7 100644 --- a/package/fwts/Config.in +++ b/package/fwts/Config.in @@ -1,6 +1,13 @@ +config BR2_PACKAGE_FWTS_ARCH_SUPPORTS + bool + default y if BR2_aarch64 + default y if BR2_arm + default y if BR2_i386 + default y if BR2_x86_64 + config BR2_PACKAGE_FWTS bool "fwts" - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 + depends on BR2_PACKAGE_FWTS_ARCH_SUPPORTS depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd depends on BR2_USE_MMU # libglib2 depends on BR2_USE_WCHAR # libglib2, libbsd @@ -33,7 +40,7 @@ comment "efi_runtime module needs a Linux kernel to be built" endif comment "fwts needs a glibc toolchain w/ wchar, threads, dynamic library" - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 + depends on BR2_PACKAGE_FWTS_ARCH_SUPPORTS depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd depends on BR2_USE_MMU depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ From yann.morin.1998 at free.fr Sat Oct 1 16:16:37 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:16:37 +0200 Subject: [Buildroot] [PATCH] package/fwts: enable for arm In-Reply-To: <20220930141350.15305-1-vincent.stehle@arm.com> References: <20220930141350.15305-1-vincent.stehle@arm.com> Message-ID: <20221001161637.GC30794@scaer> Vincent, All, On 2022-09-30 16:13 +0200, Vincent Stehl? spake thusly: > The FWTS application and its associated kernel modules do build on arm; > enable it. > > Signed-off-by: Vincent Stehl? > Cc: Erico Nunes > --- > package/fwts/Config.in | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/fwts/Config.in b/package/fwts/Config.in > index ac9a2e39098..6be1acac4ed 100644 > --- a/package/fwts/Config.in > +++ b/package/fwts/Config.in > @@ -1,6 +1,6 @@ > config BR2_PACKAGE_FWTS > bool "fwts" > - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 > + depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 || BR2_arm I've introduce BR2_PACKAGE_FWTS_ARCH_SUPPORTS, like we do in other packages when the list of supported architectures grows a bit too much, like here. Applied to master, thanks. Regards, Yann E. MORIN. > depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd > depends on BR2_USE_MMU # libglib2 > depends on BR2_USE_WCHAR # libglib2, libbsd > @@ -33,7 +33,7 @@ comment "efi_runtime module needs a Linux kernel to be built" > endif > > comment "fwts needs a glibc toolchain w/ wchar, threads, dynamic library" > - depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 > + depends on BR2_i386 || BR2_x86_64 || BR2_aarch64 || BR2_arm > depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd > depends on BR2_USE_MMU > depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:27:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:27:24 +0200 Subject: [Buildroot] [git commit] package/gitlab-runner: fix forcing openssl Message-ID: <20221001162812.C44078640A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=60f97ad95ad2ec93effed8a41e7d2e6101cd6917 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as it is part of a choice. Instead, we have a symbol explicitly to force libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. Use that. Reported-by: Yann E. MORIN Signed-off-by: Giulio Benetti Signed-off-by: Yann E. MORIN --- package/gitlab-runner/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 72c2742562..89e3e87b5c 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_LIBCURL_CURL # runtime select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. select BR2_PACKAGE_OPENSSL # runtime - select BR2_PACKAGE_LIBOPENSSL # runtime + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime help From yann.morin.1998 at free.fr Sat Oct 1 16:29:29 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:29:29 +0200 Subject: [Buildroot] [PATCH] package/gitlab-runner: fix forcing openssl In-Reply-To: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> References: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> Message-ID: <20221001162929.GD30794@scaer> Giulio, All, On 2022-09-29 13:18 +0200, Giulio Benetti spake thusly: > BR2_PACKAGE_LIBOPENSSL doesn't force selecting libopenssl, to achieve this > we need to use BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. So let's modify > accordingly and improve a bit the comment. I've reworded the commit log, and drop the comment change: the symbol name is explicit enough as to what it does. > Signed-off-by: Giulio Benetti Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/gitlab-runner/Config.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in > index 72c2742562..bfa79ac80e 100644 > --- a/package/gitlab-runner/Config.in > +++ b/package/gitlab-runner/Config.in > @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER > select BR2_PACKAGE_LIBCURL_CURL # runtime > select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. > select BR2_PACKAGE_OPENSSL # runtime > - select BR2_PACKAGE_LIBOPENSSL # runtime > + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime, force using libopenssl > select BR2_PACKAGE_LIBOPENSSL_BIN # runtime > select BR2_PACKAGE_TAR # runtime > help > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:30:12 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:30:12 +0200 Subject: [Buildroot] [PATCH] package/gitlab-runner: fix forcing openssl In-Reply-To: References: <20220929111816.497911-1-giulio.benetti@benettiengineering.com> Message-ID: <20221001163012.GE30794@scaer> Giulio, All, On 2022-09-29 13:20 +0200, Giulio Benetti spake thusly: > Forgotten, > > On 29/09/22 13:18, Giulio Benetti wrote: > >BR2_PACKAGE_LIBOPENSSL doesn't force selecting libopenssl, to achieve this > >we need to use BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. So let's modify > >accordingly and improve a bit the comment. > > > >Signed-off-by: Giulio Benetti > > Suggested-by: Yann E. MORIN Thanks, I added that, but as a Reported-by tag, because that's a bug that I reported. Regards, Yann E. MORIN. > -- > Giulio Benetti > CEO/CTO at Benetti Engineering sas > > >--- > > package/gitlab-runner/Config.in | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > >diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in > >index 72c2742562..bfa79ac80e 100644 > >--- a/package/gitlab-runner/Config.in > >+++ b/package/gitlab-runner/Config.in > >@@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER > > select BR2_PACKAGE_LIBCURL_CURL # runtime > > select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. > > select BR2_PACKAGE_OPENSSL # runtime > >- select BR2_PACKAGE_LIBOPENSSL # runtime > >+ select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime, force using libopenssl > > select BR2_PACKAGE_LIBOPENSSL_BIN # runtime > > select BR2_PACKAGE_TAR # runtime > > help > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:30:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:30:40 +0200 Subject: [Buildroot] [git commit] package/rauc: bump to version 1.8 Message-ID: <20221001163107.896F48643D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e65d768dbc41912451eaebf7f111541a672ba98c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master See the release notes[1] on GitHub for changes. [1] https://github.com/rauc/rauc/releases/tag/v1.8 Signed-off-by: Heiko Thiery Signed-off-by: Yann E. MORIN --- package/rauc/rauc.hash | 5 ++--- package/rauc/rauc.mk | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash index 677d358158..8351d0266e 100644 --- a/package/rauc/rauc.hash +++ b/package/rauc/rauc.hash @@ -1,4 +1,3 @@ -# Locally calculated, after verifying against -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz +# Locally calculated +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk index 8bfb0b79ba..0c81a6cc35 100644 --- a/package/rauc/rauc.mk +++ b/package/rauc/rauc.mk @@ -4,7 +4,7 @@ # ################################################################################ -RAUC_VERSION = 1.7 +RAUC_VERSION = 1.8 RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz RAUC_LICENSE = LGPL-2.1 From yann.morin.1998 at free.fr Sat Oct 1 16:31:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:31:05 +0200 Subject: [Buildroot] [PATCH] package/rauc: bump to version 1.8 In-Reply-To: <20221001065609.28815-1-heiko.thiery@gmail.com> References: <20221001065609.28815-1-heiko.thiery@gmail.com> Message-ID: <20221001163105.GF30794@scaer> Heiko, All, On 2022-10-01 08:56 +0200, Heiko Thiery spake thusly: > See the release notes[1] on GitHub for changes. > > [1] https://github.com/rauc/rauc/releases/tag/v1.8 > > Signed-off-by: Heiko Thiery Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/rauc/rauc.hash | 5 ++--- > package/rauc/rauc.mk | 2 +- > 2 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/package/rauc/rauc.hash b/package/rauc/rauc.hash > index 677d358158..8351d0266e 100644 > --- a/package/rauc/rauc.hash > +++ b/package/rauc/rauc.hash > @@ -1,4 +1,3 @@ > -# Locally calculated, after verifying against > -# https://github.com/rauc/rauc/releases/download/v1.6/rauc-1.6.tar.xz.asc > -sha256 8b7d37cc1eb57df4f03de3c943dd7be290b78d47be28881e8b1f070e1d5e55df rauc-1.7.tar.xz > +# Locally calculated > +sha256 d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978 rauc-1.8.tar.xz > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING > diff --git a/package/rauc/rauc.mk b/package/rauc/rauc.mk > index 8bfb0b79ba..0c81a6cc35 100644 > --- a/package/rauc/rauc.mk > +++ b/package/rauc/rauc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RAUC_VERSION = 1.7 > +RAUC_VERSION = 1.8 > RAUC_SITE = https://github.com/rauc/rauc/releases/download/v$(RAUC_VERSION) > RAUC_SOURCE = rauc-$(RAUC_VERSION).tar.xz > RAUC_LICENSE = LGPL-2.1 > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:33:01 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:33:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/spirv-llvm-translator: bump to version 11.0.0-297 In-Reply-To: <20220930033722.1898827-1-james.hilliard1@gmail.com> References: <20220930033722.1898827-1-james.hilliard1@gmail.com> Message-ID: <20221001163301.GG30794@scaer> James, All, On 2022-09-29 21:37 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- > package/spirv-llvm-translator/spirv-llvm-translator.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash > index 6133b1326a..edfca1ea02 100644 > --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash > +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash > @@ -1,3 +1,3 @@ > # locally calculated > -sha256 bcb0e5ae2d15f9876551fda46b222f911ed5afd626dfbcc66ddea9d36563ac9c spirv-llvm-translator-v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18.tar.gz > +sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz > sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT > diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk > index 73f7fe02de..159f7d3b52 100644 > --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk > +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk > @@ -6,7 +6,7 @@ > > # Generate version string using: > # git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 > -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18 > +SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 > SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) > SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA > SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:32:29 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:32:29 +0200 Subject: [Buildroot] [git commit] package/spirv-llvm-translator: bump to version 11.0.0-297 Message-ID: <20221001163310.B1E418648E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cc7bbbeac82eac9fdc9a752cd8ca10a263f8349d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- package/spirv-llvm-translator/spirv-llvm-translator.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash index 6133b1326a..edfca1ea02 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 bcb0e5ae2d15f9876551fda46b222f911ed5afd626dfbcc66ddea9d36563ac9c spirv-llvm-translator-v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18.tar.gz +sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk index 73f7fe02de..159f7d3b52 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk @@ -6,7 +6,7 @@ # Generate version string using: # git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-269-g13c76c4b275ae990d23883f7f15eec1a9adddc18 +SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT From yann.morin.1998 at free.fr Sat Oct 1 16:46:51 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:46:51 +0200 Subject: [Buildroot] [git commit] package/libbpf: bump to version 1.0.1 Message-ID: <20221001164705.58A49864FD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d0c1e5131de893427f9e04147bfcac507a02073d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/libbpf/libbpf.hash | 2 +- package/libbpf/libbpf.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libbpf/libbpf.hash b/package/libbpf/libbpf.hash index 23908ded7c..4305872d9f 100644 --- a/package/libbpf/libbpf.hash +++ b/package/libbpf/libbpf.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f4480242651a93c101ece320030f6b2b9b437f622f807719c13cb32569a6d65a libbpf-0.8.0.tar.gz +sha256 3d6afde67682c909e341bf194678a8969f17628705af25f900d5f68bd299cb03 libbpf-1.0.1.tar.gz sha256 847f4addbd56e2d5be20c4ea0845e972672fc07b755fadaae5f7abd35d71e349 LICENSE sha256 e1638b9a0c68ca90fad3df1d6b4e430804d2fbdc15e58d02cffddfae38953bbf LICENSE.BSD-2-Clause sha256 0b9a4febcdee6de55872501d5c1a8f5d8b0d1650cd4d5351995ceb22e889f8ca LICENSE.LGPL-2.1 diff --git a/package/libbpf/libbpf.mk b/package/libbpf/libbpf.mk index 987d1145f1..820f1dc4bf 100644 --- a/package/libbpf/libbpf.mk +++ b/package/libbpf/libbpf.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBBPF_VERSION = 0.8.0 +LIBBPF_VERSION = 1.0.1 LIBBPF_SITE = $(call github,libbpf,libbpf,v$(LIBBPF_VERSION)) LIBBPF_LICENSE = GPL-2.0, LGPL-2.1, BSD-2-Clause LIBBPF_LICENSE_FILES = LICENSE LICENSE.BSD-2-Clause LICENSE.LGPL-2.1 From yann.morin.1998 at free.fr Sat Oct 1 16:46:53 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:46:53 +0200 Subject: [Buildroot] [git commit] package/bpftool: bump to version 7.0.0 Message-ID: <20221001164705.637A58650D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e7b6d5c66e9ba7dce940b0587e5729fac491504d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which is now upstream. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...-bootstrapping-during-a-cross-compilation.patch | 96 ---------------------- package/bpftool/bpftool.hash | 2 +- package/bpftool/bpftool.mk | 2 +- 3 files changed, 2 insertions(+), 98 deletions(-) diff --git a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch b/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch deleted file mode 100644 index fc192681e3..0000000000 --- a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 189f777ea4829bede0bf92f572c22fe1f2c37522 Mon Sep 17 00:00:00 2001 -From: Shahab Vahedi -Date: Wed, 8 Jun 2022 14:29:28 +0000 -Subject: [PATCH] bpftool: Fix bootstrapping during a cross compilation - -This change adjusts the Makefile to use "HOSTAR" as the archive tool -to keep the sanity of the build process for the bootstrap part in -check. For the rationale, please continue reading. - -When cross compiling bpftool with buildroot, it leads to an invocation -like: - -$ AR="/path/to/buildroot/host/bin/arc-linux-gcc-ar" \ - CC="/path/to/buildroot/host/bin/arc-linux-gcc" \ - ... - make - -Which in return fails while building the bootstrap section: - -----------------------------------8<---------------------------------- - - make: Entering directory '/src/bpftool-v6.7.0/src' - ... libbfd: [ on ] - ... disassembler-four-args: [ on ] - ... zlib: [ on ] - ... libcap: [ OFF ] - ... clang-bpf-co-re: [ on ] <-- triggers bootstrap - - . - . - . - - LINK /src/bpftool-v6.7.0/src/bootstrap/bpftool - /usr/bin/ld: /src/bpftool-v6.7.0/src/bootstrap/libbpf/libbpf.a: - error adding symbols: archive has no index; run ranlib - to add one - collect2: error: ld returned 1 exit status - make: *** [Makefile:211: /src/bpftool-v6.7.0/src/bootstrap/bpftool] - Error 1 - make: *** Waiting for unfinished jobs.... - AR /src/bpftool-v6.7.0/src/libbpf/libbpf.a - make[1]: Leaving directory '/src/bpftool-v6.7.0/libbpf/src' - make: Leaving directory '/src/bpftool-v6.7.0/src' - ----------------------------------->8---------------------------------- - -This occurs because setting "AR" confuses the build process for the -bootstrap section and it calls "arc-linux-gcc-ar" to create and index -"libbpf.a" instead of the host "ar". - -Signed-off-by: Shahab Vahedi -Signed-off-by: Daniel Borkmann -Reviewed-by: Quentin Monnet -Cc: Jean-Philippe Brucker -Link: https://lore.kernel.org/bpf/8d297f0c-cfd0-ef6f-3970-6dddb3d9a87a at synopsys.com -Upstream: https://github.com/libbpf/bpftool/commit/189f777ea4829bede0bf92f572c22fe1f2c37522 - -This is an adapted version, else it won't be possible to cross compile -bpftool if "clang-bpf-co-re" feature is enabled. ---- - src/Makefile | 2 +- - src/Makefile.include | 2 ++ - 2 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/src/Makefile b/src/Makefile -index b657502..b8b0808 100644 ---- a/src/Makefile -+++ b/src/Makefile -@@ -51,7 +51,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_ - $(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT) - $(Q)$(MAKE) -C $(BPF_DIR) OBJDIR=$(patsubst %/,%,$(LIBBPF_BOOTSTRAP_OUTPUT)) \ - PREFIX=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) \ -- ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers -+ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) $@ install_headers - - $(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR) - $(call QUIET_INSTALL, $@) ---- a/src/Makefile.include -+++ b/src/Makefile.include -@@ -12,11 +12,13 @@ - ifneq ($(LLVM),) - $(if $(findstring default,$(origin CC)),$(eval CC := clang$(LLVM_VERSION))) - $(if $(findstring default,$(origin LD)),$(eval LD := ld.lld$(LLVM_VERSION))) -+ HOSTAR ?= llvm-ar - HOSTCC ?= clang - HOSTLD ?= ld.lld - else - $(if $(findstring default,$(origin CC)),$(eval CC = $(CROSS_COMPILE)$(CC))) - $(if $(findstring default,$(origin LD)),$(eval LD = $(CROSS_COMPILE)$(LD))) -+ HOSTAR ?= ar - HOSTCC ?= gcc - HOSTLD ?= ld - endif --- -2.35.3 - diff --git a/package/bpftool/bpftool.hash b/package/bpftool/bpftool.hash index 5fbc25adb7..92b9359fe3 100644 --- a/package/bpftool/bpftool.hash +++ b/package/bpftool/bpftool.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f8f8cabc001823d270898ea3a635d1eb88e067bc24eed06f74e58d2650b32312 bpftool-v6.8.0-br1.tar.gz +sha256 465a50fea4afbacd326f2209d81ae0dcff637fbb2c9d1a315e94f79a788ce960 bpftool-v7.0.0-br1.tar.gz sha256 7c588754d5e81e92e2a12e47cf78949d485c9c22b4850f12d21b3835c85947d1 LICENSE sha256 6313108c23efffa36948f8b2cff1560a5935373b527b0e1a837cc77e6ed1bacd LICENSE.BSD-2-Clause sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL-2.0 diff --git a/package/bpftool/bpftool.mk b/package/bpftool/bpftool.mk index bb1e4ccdff..3b27698130 100644 --- a/package/bpftool/bpftool.mk +++ b/package/bpftool/bpftool.mk @@ -4,7 +4,7 @@ # ################################################################################ -BPFTOOL_VERSION = v6.8.0 +BPFTOOL_VERSION = v7.0.0 BPFTOOL_SITE = https://github.com/libbpf/bpftool BPFTOOL_SITE_METHOD = git BPFTOOL_GIT_SUBMODULES = YES From yann.morin.1998 at free.fr Sat Oct 1 16:47:20 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:47:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/libbpf: bump to version 1.0.1 In-Reply-To: <20220929233443.3353813-1-james.hilliard1@gmail.com> References: <20220929233443.3353813-1-james.hilliard1@gmail.com> Message-ID: <20221001164720.GH30794@scaer> James, All, On 2022-09-29 17:34 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libbpf/libbpf.hash | 2 +- > package/libbpf/libbpf.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/libbpf/libbpf.hash b/package/libbpf/libbpf.hash > index 23908ded7c..4305872d9f 100644 > --- a/package/libbpf/libbpf.hash > +++ b/package/libbpf/libbpf.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f4480242651a93c101ece320030f6b2b9b437f622f807719c13cb32569a6d65a libbpf-0.8.0.tar.gz > +sha256 3d6afde67682c909e341bf194678a8969f17628705af25f900d5f68bd299cb03 libbpf-1.0.1.tar.gz > sha256 847f4addbd56e2d5be20c4ea0845e972672fc07b755fadaae5f7abd35d71e349 LICENSE > sha256 e1638b9a0c68ca90fad3df1d6b4e430804d2fbdc15e58d02cffddfae38953bbf LICENSE.BSD-2-Clause > sha256 0b9a4febcdee6de55872501d5c1a8f5d8b0d1650cd4d5351995ceb22e889f8ca LICENSE.LGPL-2.1 > diff --git a/package/libbpf/libbpf.mk b/package/libbpf/libbpf.mk > index 987d1145f1..820f1dc4bf 100644 > --- a/package/libbpf/libbpf.mk > +++ b/package/libbpf/libbpf.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LIBBPF_VERSION = 0.8.0 > +LIBBPF_VERSION = 1.0.1 > LIBBPF_SITE = $(call github,libbpf,libbpf,v$(LIBBPF_VERSION)) > LIBBPF_LICENSE = GPL-2.0, LGPL-2.1, BSD-2-Clause > LIBBPF_LICENSE_FILES = LICENSE LICENSE.BSD-2-Clause LICENSE.LGPL-2.1 > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:47:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:47:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/bpftool: bump to version 7.0.0 In-Reply-To: <20220929234406.374167-1-james.hilliard1@gmail.com> References: <20220929234406.374167-1-james.hilliard1@gmail.com> Message-ID: <20221001164732.GI30794@scaer> James, All, On 2022-09-29 17:44 -0600, James Hilliard spake thusly: > Drop patch which is now upstream. > > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...strapping-during-a-cross-compilation.patch | 96 ------------------- > package/bpftool/bpftool.hash | 2 +- > package/bpftool/bpftool.mk | 2 +- > 3 files changed, 2 insertions(+), 98 deletions(-) > delete mode 100644 package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > > diff --git a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch b/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > deleted file mode 100644 > index fc192681e3..0000000000 > --- a/package/bpftool/0001-bpftool-Fix-bootstrapping-during-a-cross-compilation.patch > +++ /dev/null > @@ -1,96 +0,0 @@ > -From 189f777ea4829bede0bf92f572c22fe1f2c37522 Mon Sep 17 00:00:00 2001 > -From: Shahab Vahedi > -Date: Wed, 8 Jun 2022 14:29:28 +0000 > -Subject: [PATCH] bpftool: Fix bootstrapping during a cross compilation > - > -This change adjusts the Makefile to use "HOSTAR" as the archive tool > -to keep the sanity of the build process for the bootstrap part in > -check. For the rationale, please continue reading. > - > -When cross compiling bpftool with buildroot, it leads to an invocation > -like: > - > -$ AR="/path/to/buildroot/host/bin/arc-linux-gcc-ar" \ > - CC="/path/to/buildroot/host/bin/arc-linux-gcc" \ > - ... > - make > - > -Which in return fails while building the bootstrap section: > - > -----------------------------------8<---------------------------------- > - > - make: Entering directory '/src/bpftool-v6.7.0/src' > - ... libbfd: [ on ] > - ... disassembler-four-args: [ on ] > - ... zlib: [ on ] > - ... libcap: [ OFF ] > - ... clang-bpf-co-re: [ on ] <-- triggers bootstrap > - > - . > - . > - . > - > - LINK /src/bpftool-v6.7.0/src/bootstrap/bpftool > - /usr/bin/ld: /src/bpftool-v6.7.0/src/bootstrap/libbpf/libbpf.a: > - error adding symbols: archive has no index; run ranlib > - to add one > - collect2: error: ld returned 1 exit status > - make: *** [Makefile:211: /src/bpftool-v6.7.0/src/bootstrap/bpftool] > - Error 1 > - make: *** Waiting for unfinished jobs.... > - AR /src/bpftool-v6.7.0/src/libbpf/libbpf.a > - make[1]: Leaving directory '/src/bpftool-v6.7.0/libbpf/src' > - make: Leaving directory '/src/bpftool-v6.7.0/src' > - > ----------------------------------->8---------------------------------- > - > -This occurs because setting "AR" confuses the build process for the > -bootstrap section and it calls "arc-linux-gcc-ar" to create and index > -"libbpf.a" instead of the host "ar". > - > -Signed-off-by: Shahab Vahedi > -Signed-off-by: Daniel Borkmann > -Reviewed-by: Quentin Monnet > -Cc: Jean-Philippe Brucker > -Link: https://lore.kernel.org/bpf/8d297f0c-cfd0-ef6f-3970-6dddb3d9a87a at synopsys.com > -Upstream: https://github.com/libbpf/bpftool/commit/189f777ea4829bede0bf92f572c22fe1f2c37522 > - > -This is an adapted version, else it won't be possible to cross compile > -bpftool if "clang-bpf-co-re" feature is enabled. > ---- > - src/Makefile | 2 +- > - src/Makefile.include | 2 ++ > - 2 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/src/Makefile b/src/Makefile > -index b657502..b8b0808 100644 > ---- a/src/Makefile > -+++ b/src/Makefile > -@@ -51,7 +51,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_ > - $(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT) > - $(Q)$(MAKE) -C $(BPF_DIR) OBJDIR=$(patsubst %/,%,$(LIBBPF_BOOTSTRAP_OUTPUT)) \ > - PREFIX=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) \ > -- ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers > -+ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) $@ install_headers > - > - $(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR) > - $(call QUIET_INSTALL, $@) > ---- a/src/Makefile.include > -+++ b/src/Makefile.include > -@@ -12,11 +12,13 @@ > - ifneq ($(LLVM),) > - $(if $(findstring default,$(origin CC)),$(eval CC := clang$(LLVM_VERSION))) > - $(if $(findstring default,$(origin LD)),$(eval LD := ld.lld$(LLVM_VERSION))) > -+ HOSTAR ?= llvm-ar > - HOSTCC ?= clang > - HOSTLD ?= ld.lld > - else > - $(if $(findstring default,$(origin CC)),$(eval CC = $(CROSS_COMPILE)$(CC))) > - $(if $(findstring default,$(origin LD)),$(eval LD = $(CROSS_COMPILE)$(LD))) > -+ HOSTAR ?= ar > - HOSTCC ?= gcc > - HOSTLD ?= ld > - endif > --- > -2.35.3 > - > diff --git a/package/bpftool/bpftool.hash b/package/bpftool/bpftool.hash > index 5fbc25adb7..92b9359fe3 100644 > --- a/package/bpftool/bpftool.hash > +++ b/package/bpftool/bpftool.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f8f8cabc001823d270898ea3a635d1eb88e067bc24eed06f74e58d2650b32312 bpftool-v6.8.0-br1.tar.gz > +sha256 465a50fea4afbacd326f2209d81ae0dcff637fbb2c9d1a315e94f79a788ce960 bpftool-v7.0.0-br1.tar.gz > sha256 7c588754d5e81e92e2a12e47cf78949d485c9c22b4850f12d21b3835c85947d1 LICENSE > sha256 6313108c23efffa36948f8b2cff1560a5935373b527b0e1a837cc77e6ed1bacd LICENSE.BSD-2-Clause > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL-2.0 > diff --git a/package/bpftool/bpftool.mk b/package/bpftool/bpftool.mk > index bb1e4ccdff..3b27698130 100644 > --- a/package/bpftool/bpftool.mk > +++ b/package/bpftool/bpftool.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BPFTOOL_VERSION = v6.8.0 > +BPFTOOL_VERSION = v7.0.0 > BPFTOOL_SITE = https://github.com/libbpf/bpftool > BPFTOOL_SITE_METHOD = git > BPFTOOL_GIT_SUBMODULES = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:48:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:48:13 +0200 Subject: [Buildroot] [git commit] package/mpd: update to version 0.23.9 Message-ID: <20221001164834.BD9CA8662C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8898523d4a88ba06d89c146d5336a785086a75b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Mostly internal refactoring and some minor enhancements /fixes in features cdio_paranoia, ffmpeg (support version 5.1), pipewire, replay gain. Improve iconv detection. Fix bogus volume levels with multiple partitions. For partition support, version 0.23.9 or later is recommended. Full change log: https://raw.githubusercontent.com/MusicPlayerDaemon/MPD/v0.23.9/NEWS Tested on: i386 (build, run) x86_64 (build) aarch64 (build, run) Signed-off-by: Andreas Ziegler Signed-off-by: Yann E. MORIN --- package/mpd/mpd.hash | 2 +- package/mpd/mpd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mpd/mpd.hash b/package/mpd/mpd.hash index e5f587fefc..fca0ee8539 100644 --- a/package/mpd/mpd.hash +++ b/package/mpd/mpd.hash @@ -1,3 +1,3 @@ # Locally calculated after checking pgp signature -sha256 86bb569bf3b519821f36f6bb5564e484e85d2564411b34b200fe2cd3a04e78cf mpd-0.23.8.tar.xz +sha256 2becaba980402e8dc7972ccc3476e493b7ae2eeb720d31fa6712472ed48e9f2d mpd-0.23.9.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk index c21426b873..5c15953984 100644 --- a/package/mpd/mpd.mk +++ b/package/mpd/mpd.mk @@ -5,7 +5,7 @@ ################################################################################ MPD_VERSION_MAJOR = 0.23 -MPD_VERSION = $(MPD_VERSION_MAJOR).8 +MPD_VERSION = $(MPD_VERSION_MAJOR).9 MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz MPD_SITE = https://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR) MPD_DEPENDENCIES = host-pkgconf boost fmt From yann.morin.1998 at free.fr Sat Oct 1 16:48:49 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:48:49 +0200 Subject: [Buildroot] [PATCH] package/mpd: update to version 0.23.9 In-Reply-To: <20220929105215.2984-1-br015@umbiko.net> References: <20220929105215.2984-1-br015@umbiko.net> Message-ID: <20221001164849.GJ30794@scaer> Andreas, All, On 2022-09-29 12:52 +0200, Andreas Ziegler spake thusly: > Mostly internal refactoring and some minor enhancements /fixes in features > cdio_paranoia, ffmpeg (support version 5.1), pipewire, replay gain. > > Improve iconv detection. > > Fix bogus volume levels with multiple partitions. > For partition support, version 0.23.9 or later is recommended. > > Full change log: > https://raw.githubusercontent.com/MusicPlayerDaemon/MPD/v0.23.9/NEWS > > Tested on: > i386 (build, run) > x86_64 (build) > aarch64 (build, run) > > Signed-off-by: Andreas Ziegler Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mpd/mpd.hash | 2 +- > package/mpd/mpd.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/mpd/mpd.hash b/package/mpd/mpd.hash > index e5f587fefc..fca0ee8539 100644 > --- a/package/mpd/mpd.hash > +++ b/package/mpd/mpd.hash > @@ -1,3 +1,3 @@ > # Locally calculated after checking pgp signature > -sha256 86bb569bf3b519821f36f6bb5564e484e85d2564411b34b200fe2cd3a04e78cf mpd-0.23.8.tar.xz > +sha256 2becaba980402e8dc7972ccc3476e493b7ae2eeb720d31fa6712472ed48e9f2d mpd-0.23.9.tar.xz > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING > diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk > index c21426b873..5c15953984 100644 > --- a/package/mpd/mpd.mk > +++ b/package/mpd/mpd.mk > @@ -5,7 +5,7 @@ > ################################################################################ > > MPD_VERSION_MAJOR = 0.23 > -MPD_VERSION = $(MPD_VERSION_MAJOR).8 > +MPD_VERSION = $(MPD_VERSION_MAJOR).9 > MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz > MPD_SITE = https://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR) > MPD_DEPENDENCIES = host-pkgconf boost fmt > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:50:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:24 +0200 Subject: [Buildroot] [git commit] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221001165048.E4E65866E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2e4c0e722f4d9494c2451458a42d4c4f8ef006ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Sat Oct 1 16:50:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:28 +0200 Subject: [Buildroot] [git commit] package/ser2net: bump to version 4.3.8 Message-ID: <20221001165049.07A1B866FB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db3a039e27f65f6cb5a24019741c21e6f741b6dd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/ser2net/ser2net.hash | 6 +++--- package/ser2net/ser2net.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/ser2net/ser2net.hash b/package/ser2net/ser2net.hash index db493b28cb..50a2efdee8 100644 --- a/package/ser2net/ser2net.hash +++ b/package/ser2net/ser2net.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/ser2net/files/ser2net/ -md5 3323783668b20016d79458e82327cff8 ser2net-4.3.7.tar.gz -sha1 88c0542b3b5e8ce03bc99ace00b2e163382e726e ser2net-4.3.7.tar.gz +md5 73b4ccc7e9d89034f1a1a20a780b9da9 ser2net-4.3.8.tar.gz +sha1 d1597d88d154489cb08bac69bb1772712d30cbcd ser2net-4.3.8.tar.gz # Locally computed: -sha256 542915e240ae8b5c7dcec8d1589e6067818532900d45cfef226cea9f0e671d13 ser2net-4.3.7.tar.gz +sha256 e5620975523059a38709bb53c0567600adbbcb8011066a2d2fe1b4db9efe0ba3 ser2net-4.3.8.tar.gz sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING diff --git a/package/ser2net/ser2net.mk b/package/ser2net/ser2net.mk index 393d358033..679aaec29a 100644 --- a/package/ser2net/ser2net.mk +++ b/package/ser2net/ser2net.mk @@ -4,7 +4,7 @@ # ################################################################################ -SER2NET_VERSION = 4.3.7 +SER2NET_VERSION = 4.3.8 SER2NET_SITE = https://downloads.sourceforge.net/project/ser2net/ser2net SER2NET_LICENSE = GPL-2.0+ SER2NET_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sat Oct 1 16:50:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:26 +0200 Subject: [Buildroot] [git commit] package/gensio: bump to version 2.5.5 Message-ID: <20221001165048.F0DF3866EB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f67d23af11510b447d9d0e1a71249f97e655305 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- .../0001-tools-gensiot-Fix-build-with-musl.patch | 29 ---------------------- package/gensio/gensio.hash | 6 ++--- package/gensio/gensio.mk | 2 +- 3 files changed, 4 insertions(+), 33 deletions(-) diff --git a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch b/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch deleted file mode 100644 index 7cda950c9e..0000000000 --- a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 64f8f754447572a6b7bed4038a9a29a12b448479 Mon Sep 17 00:00:00 2001 -From: Jan Luebbe -Date: Thu, 25 Aug 2022 12:19:16 +0200 -Subject: [PATCH] tools:gensiot: Fix build with musl - -According to POSIX getpid() is available in unistd.h, not sys/unistd.h. - -Signed-off-by: Jan Luebbe - -[Retrieved from: -https://github.com/cminyard/gensio/commit/64f8f754447572a6b7bed4038a9a29a12b448479] -Signed-off-by: Fabrice Fontaine ---- - tools/gensiotool.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/tools/gensiotool.c b/tools/gensiotool.c -index cac531bb..ab0bb958 100644 ---- a/tools/gensiotool.c -+++ b/tools/gensiotool.c -@@ -44,7 +44,7 @@ - #include - #include - #include --#include -+#include - #include - #endif - diff --git a/package/gensio/gensio.hash b/package/gensio/gensio.hash index a0db4bc516..84af3fdab1 100644 --- a/package/gensio/gensio.hash +++ b/package/gensio/gensio.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/ser2net/files/ser2net/ -md5 60f90f62180922e2c7550877c4bb950c gensio-2.5.2.tar.gz -sha1 b6c2ec39b51a56f5d28e88a59122f4c65ff844fa gensio-2.5.2.tar.gz +md5 c8d65e1809ed5cd1138fa309e3ab0e94 gensio-2.5.5.tar.gz +sha1 076fc8324dedb658972a88c738131a409968e2ba gensio-2.5.5.tar.gz # Locally computed: -sha256 f7bc3d2ba9da73489dd3227a21ddd2f44a18c443185ce2b1a08ec564da06e6d1 gensio-2.5.2.tar.gz +sha256 63c5fff536efd080fb7bc7fa084331c19fc64abd42b7f2bec86bd77b4fd10840 gensio-2.5.5.tar.gz sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING sha256 dcac7d447dd81ab96d28dce00a07a6486e623f7ded94e2a2a8e83312405cdf89 COPYING.LIB diff --git a/package/gensio/gensio.mk b/package/gensio/gensio.mk index f1cc00bf32..5538f97b19 100644 --- a/package/gensio/gensio.mk +++ b/package/gensio/gensio.mk @@ -4,7 +4,7 @@ # ################################################################################ -GENSIO_VERSION = 2.5.2 +GENSIO_VERSION = 2.5.5 GENSIO_SITE = http://downloads.sourceforge.net/project/ser2net/ser2net GENSIO_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (tools) GENSIO_LICENSE_FILES = COPYING.LIB COPYING From yann.morin.1998 at free.fr Sat Oct 1 16:50:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:50:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/ser2net: bump to version 4.3.8 In-Reply-To: <20220929083341.2485242-1-james.hilliard1@gmail.com> References: <20220929083341.2485242-1-james.hilliard1@gmail.com> Message-ID: <20221001165055.GK30794@scaer> James, All, On 2022-09-29 02:33 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/ser2net/ser2net.hash | 6 +++--- > package/ser2net/ser2net.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/ser2net/ser2net.hash b/package/ser2net/ser2net.hash > index db493b28cb..50a2efdee8 100644 > --- a/package/ser2net/ser2net.hash > +++ b/package/ser2net/ser2net.hash > @@ -1,6 +1,6 @@ > # From https://sourceforge.net/projects/ser2net/files/ser2net/ > -md5 3323783668b20016d79458e82327cff8 ser2net-4.3.7.tar.gz > -sha1 88c0542b3b5e8ce03bc99ace00b2e163382e726e ser2net-4.3.7.tar.gz > +md5 73b4ccc7e9d89034f1a1a20a780b9da9 ser2net-4.3.8.tar.gz > +sha1 d1597d88d154489cb08bac69bb1772712d30cbcd ser2net-4.3.8.tar.gz > # Locally computed: > -sha256 542915e240ae8b5c7dcec8d1589e6067818532900d45cfef226cea9f0e671d13 ser2net-4.3.7.tar.gz > +sha256 e5620975523059a38709bb53c0567600adbbcb8011066a2d2fe1b4db9efe0ba3 ser2net-4.3.8.tar.gz > sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING > diff --git a/package/ser2net/ser2net.mk b/package/ser2net/ser2net.mk > index 393d358033..679aaec29a 100644 > --- a/package/ser2net/ser2net.mk > +++ b/package/ser2net/ser2net.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SER2NET_VERSION = 4.3.7 > +SER2NET_VERSION = 4.3.8 > SER2NET_SITE = https://downloads.sourceforge.net/project/ser2net/ser2net > SER2NET_LICENSE = GPL-2.0+ > SER2NET_LICENSE_FILES = COPYING > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:51:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:51:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/gensio: bump to version 2.5.5 In-Reply-To: <20220929083004.2387969-1-james.hilliard1@gmail.com> References: <20220929083004.2387969-1-james.hilliard1@gmail.com> Message-ID: <20221001165107.GL30794@scaer> James, All, On 2022-09-29 02:30 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...01-tools-gensiot-Fix-build-with-musl.patch | 29 ------------------- > package/gensio/gensio.hash | 6 ++-- > package/gensio/gensio.mk | 2 +- > 3 files changed, 4 insertions(+), 33 deletions(-) > delete mode 100644 package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > > diff --git a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch b/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > deleted file mode 100644 > index 7cda950c9e..0000000000 > --- a/package/gensio/0001-tools-gensiot-Fix-build-with-musl.patch > +++ /dev/null > @@ -1,29 +0,0 @@ > -From 64f8f754447572a6b7bed4038a9a29a12b448479 Mon Sep 17 00:00:00 2001 > -From: Jan Luebbe > -Date: Thu, 25 Aug 2022 12:19:16 +0200 > -Subject: [PATCH] tools:gensiot: Fix build with musl > - > -According to POSIX getpid() is available in unistd.h, not sys/unistd.h. > - > -Signed-off-by: Jan Luebbe > - > -[Retrieved from: > -https://github.com/cminyard/gensio/commit/64f8f754447572a6b7bed4038a9a29a12b448479] > -Signed-off-by: Fabrice Fontaine > ---- > - tools/gensiotool.c | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/tools/gensiotool.c b/tools/gensiotool.c > -index cac531bb..ab0bb958 100644 > ---- a/tools/gensiotool.c > -+++ b/tools/gensiotool.c > -@@ -44,7 +44,7 @@ > - #include > - #include > - #include > --#include > -+#include > - #include > - #endif > - > diff --git a/package/gensio/gensio.hash b/package/gensio/gensio.hash > index a0db4bc516..84af3fdab1 100644 > --- a/package/gensio/gensio.hash > +++ b/package/gensio/gensio.hash > @@ -1,7 +1,7 @@ > # From https://sourceforge.net/projects/ser2net/files/ser2net/ > -md5 60f90f62180922e2c7550877c4bb950c gensio-2.5.2.tar.gz > -sha1 b6c2ec39b51a56f5d28e88a59122f4c65ff844fa gensio-2.5.2.tar.gz > +md5 c8d65e1809ed5cd1138fa309e3ab0e94 gensio-2.5.5.tar.gz > +sha1 076fc8324dedb658972a88c738131a409968e2ba gensio-2.5.5.tar.gz > # Locally computed: > -sha256 f7bc3d2ba9da73489dd3227a21ddd2f44a18c443185ce2b1a08ec564da06e6d1 gensio-2.5.2.tar.gz > +sha256 63c5fff536efd080fb7bc7fa084331c19fc64abd42b7f2bec86bd77b4fd10840 gensio-2.5.5.tar.gz > sha256 501f3108e6c03e5a0a5585ebaaa369171aead5319cd0a7a4dc1f66211c1f09f1 COPYING > sha256 dcac7d447dd81ab96d28dce00a07a6486e623f7ded94e2a2a8e83312405cdf89 COPYING.LIB > diff --git a/package/gensio/gensio.mk b/package/gensio/gensio.mk > index f1cc00bf32..5538f97b19 100644 > --- a/package/gensio/gensio.mk > +++ b/package/gensio/gensio.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -GENSIO_VERSION = 2.5.2 > +GENSIO_VERSION = 2.5.5 > GENSIO_SITE = http://downloads.sourceforge.net/project/ser2net/ser2net > GENSIO_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (tools) > GENSIO_LICENSE_FILES = COPYING.LIB COPYING > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 16:52:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 18:52:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20220928213631.14450-1-fontaine.fabrice@gmail.com> References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> Message-ID: <20221001165241.GM30794@scaer> Fabrice, All, On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > Denial of service attack and buffer overflow against TLS 1.3 > servers using session ticket resumption. When built with > --enable-session-ticket and making use of TLS 1.3 server code in > wolfSSL, there is the possibility of a malicious client to craft a > malformed second ClientHello packet that causes the server to crash. > This issue is limited to when using both --enable-session-ticket and TLS > 1.3 on the server side. Users with TLS 1.3 servers, and having > --enable-session-ticket, should update to the latest version of wolfSSL. I see that we are not explicitly using either --enable or --disable-session-ticket, so what is the default, and were we impacted? Also, we should have an explicit setting for that, rather than leave it to chance. > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/wolfssl/wolfssl.hash | 2 +- > package/wolfssl/wolfssl.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash > index f1401e4cda..3849ffb9fc 100644 > --- a/package/wolfssl/wolfssl.hash > +++ b/package/wolfssl/wolfssl.hash > @@ -1,5 +1,5 @@ > # Locally computed: > -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz > +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz > > # Hash for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk > index ca360312c9..95d4f47952 100644 > --- a/package/wolfssl/wolfssl.mk > +++ b/package/wolfssl/wolfssl.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -WOLFSSL_VERSION = 5.5.0 > +WOLFSSL_VERSION = 5.5.1 > WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) > WOLFSSL_INSTALL_STAGING = YES > > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From romain.naour at gmail.com Sat Oct 1 17:13:01 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:13:01 +0200 Subject: [Buildroot] [PATCH v5 1/3] boot/ti-k3-r5-loader: add new package In-Reply-To: <20220923205543.1518798-2-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-2-gadiyar@ti.com> Message-ID: Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar via buildroot a ?crit?: > From: Xuanhao Shi > > This is a separate U-Boot package that would build > the intermediate spl binary for the R5 core on TI's k3 boards. > Usually, the resulting spl will be used for k3-image-gen > to build the full R5 boot binary tiboot3.bin. > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 6 +++ > boot/Config.in | 1 + > boot/ti-k3-r5-loader/Config.in | 13 +++++++ > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 + > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 45 +++++++++++++++++++++++ > 5 files changed, 67 insertions(+) > create mode 100644 boot/ti-k3-r5-loader/Config.in > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 3de63ea72f..5f36cbf535 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -128,6 +128,9 @@ F: package/dcron/ > F: package/libxmlrpc/ > F: package/python-docopt/ > > +N: Anand Gadiyar > +F: boot/ti-k3-r5-loader/ > + > N: Andr? Zwing > F: package/libkrb5/ > F: package/openal/ > @@ -3063,6 +3066,9 @@ F: package/python-pyusb/ > N: Wojciech Nizi?ski > F: package/fwup/ > > +N: Xuanhao Shi > +F: boot/ti-k3-r5-loader/ > + > N: Yair Ben Avraham > F: package/casync/ > F: package/gloox/ > diff --git a/boot/Config.in b/boot/Config.in > index 40472ae07d..ce17b2df6b 100644 > --- a/boot/Config.in > +++ b/boot/Config.in > @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" > source "boot/shim/Config.in" > source "boot/sun20i-d1-spl/Config.in" > source "boot/syslinux/Config.in" > +source "boot/ti-k3-r5-loader/Config.in" > source "boot/uboot/Config.in" > source "boot/vexpress-firmware/Config.in" > > diff --git a/boot/ti-k3-r5-loader/Config.in b/boot/ti-k3-r5-loader/Config.in > new file mode 100644 > index 0000000000..7f5fa0b4c8 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/Config.in > @@ -0,0 +1,13 @@ > +config BR2_TARGET_TI_K3_R5_LOADER > + bool "ti-k3-r5-loader" > + help > + Separate U-Boot build for R5 cores on TI's k3 boards. > + Usually used to build tiboot3.bin with k3-image-gen. Usually we add a "if BR2_TARGET_TI_K3_R5_LOADER" instead of "depends on BR2_TARGET_TI_K3_R5_LOADER" for each sub-options. > + > +config BR2_TARGET_TI_K3_R5_LOADER_BOARD > + string "Board to configure for" > + depends on BR2_TARGET_TI_K3_R5_LOADER > + help > + Specify the board to configure the bootloader for. > + This should be the name of a board under board/ti > + For example, "am64x_evm". > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > new file mode 100644 > index 0000000000..fb6ce7c2a6 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > @@ -0,0 +1,2 @@ > +# Locally computed: > +sha256 6d69d5e4635cb3fa7852bf15f88ca342ef7740196e71961d3572deb58ba44bea u-boot-2022.10-rc1.tar.bz2 > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > new file mode 100644 > index 0000000000..1e09fad9f5 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > @@ -0,0 +1,45 @@ > +################################################################################ > +# > +# ti-k3-r5-loader.mk > +# > +################################################################################ > + > +TI_K3_R5_LOADER_VERSION = 2022.10-rc1 We prefer using a release version not an -rc pre-release. Is 2022.07 is good enough? > +TI_K3_R5_LOADER_SITE = https://ftp.denx.de/pub/u-boot > +TI_K3_R5_LOADER_SOURCE = u-boot-$(TI_K3_R5_LOADER_VERSION).tar.bz2 > +TI_K3_R5_LOADER_LICENSE = GPL-2.0+ > +TI_K3_R5_LOADER_LICENSE_FILES = Licenses/gpl-2.0.txt > +TI_K3_R5_LOADER_CPE_ID_VENDOR = denx > +TI_K3_R5_LOADER_CPE_ID_PRODUCT = u-boot > +TI_K3_R5_LOADER_INSTALL_IMAGES = YES > +TI_K3_R5_LOADER_DEPENDENCIES = \ > + host-pkgconf \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + host-arm-gnu-toolchain \ > + host-openssl > + > +TI_K3_R5_LOADER_MAKE = $(BR2_MAKE) > +TI_K3_R5_LOADER_MAKE_ENV = $(TARGET_MAKE_ENV) > +TI_K3_R5_LOADER_KCONFIG_DEPENDENCIES = \ > + host-arm-gnu-toolchain \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + $(BR2_BISON_HOST_DEPENDENCY) \ > + $(BR2_FLEX_HOST_DEPENDENCY) > + > +TI_K3_R5_LOADER_BOARD = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD)) We have to check if BR2_TARGET_TI_K3_R5_LOADER_BOARD is not empty. > +TI_K3_R5_LOADER_KCONFIG_DEFCONFIG = $(TI_K3_R5_LOADER_BOARD)_r5_defconfig I think we should handle the ti-k3-r5-loader defconfig as for other packages using a defconfig. We should use a Kconfig option to provide the ti-k3-r5-loader (uboot) defconfig name from Buildroot defconfig and not hardcoding a suffix _r5_ from the package makefile (.mk). > +TI_K3_R5_LOADER_MAKE_OPTS += \ > + CROSS_COMPILE=$(HOST_ARM_GNU_TOOLCHAIN_INSTALL_DIR)/bin/arm-none-eabi- \ Use the $(HOST_DIR) instead. > + ARCH=arm \ > + HOSTCC="$(HOSTCC) $(subst -I/,-isystem /,$(subst -I /,-isystem /,$(HOST_CFLAGS)))" \ > + HOSTLDFLAGS="$(HOST_LDFLAGS)" > + > +define TI_K3_R5_LOADER_BUILD_CMDS > + $(TARGET_CONFIGURE_OPTS) $(TI_K3_R5_LOADER_MAKE) -C $(@D) $(TI_K3_R5_LOADER_MAKE_OPTS) > +endef > + > +define TI_K3_R5_LOADER_INSTALL_IMAGES_CMDS > + cp $(@D)/spl/u-boot-spl.bin $(BINARIES_DIR)/r5-u-boot-spl.bin > +endef Best regards, Romain > + > +$(eval $(kconfig-package)) From romain.naour at gmail.com Sat Oct 1 17:34:43 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:34:43 +0200 Subject: [Buildroot] [PATCH v5 2/3] boot/ti-k3-image-gen: add new package In-Reply-To: <20220923205543.1518798-3-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-3-gadiyar@ti.com> Message-ID: Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar a ?crit?: > From: Xuanhao Shi > > This is the image generator that builds the full boot binary, > tiboot3.bin, for the R5 core on TI's k3 devices. > This requires the R5 spl output from the ti-k3-r5-loader package. > > https://git.ti.com/cgit/k3-image-gen/k3-image-gen > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 2 ++ > boot/Config.in | 1 + > boot/ti-k3-image-gen/Config.in | 24 +++++++++++++++++ > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 2 ++ > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 33 +++++++++++++++++++++++ > 5 files changed, 62 insertions(+) > create mode 100644 boot/ti-k3-image-gen/Config.in > create mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > create mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 5f36cbf535..81f095f799 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -129,6 +129,7 @@ F: package/libxmlrpc/ > F: package/python-docopt/ > > N: Anand Gadiyar > +F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > > N: Andr? Zwing > @@ -3067,6 +3068,7 @@ N: Wojciech Nizi?ski > F: package/fwup/ > > N: Xuanhao Shi > +F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ Actually this email is bouncing. please remove it. > > N: Yair Ben Avraham > diff --git a/boot/Config.in b/boot/Config.in > index ce17b2df6b..1b25bacfee 100644 > --- a/boot/Config.in > +++ b/boot/Config.in > @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" > source "boot/shim/Config.in" > source "boot/sun20i-d1-spl/Config.in" > source "boot/syslinux/Config.in" > +source "boot/ti-k3-image-gen/Config.in" > source "boot/ti-k3-r5-loader/Config.in" > source "boot/uboot/Config.in" > source "boot/vexpress-firmware/Config.in" > diff --git a/boot/ti-k3-image-gen/Config.in b/boot/ti-k3-image-gen/Config.in > new file mode 100644 > index 0000000000..00416dcefc > --- /dev/null > +++ b/boot/ti-k3-image-gen/Config.in > @@ -0,0 +1,24 @@ > +config BR2_TARGET_TI_K3_IMAGE_GEN > + bool "ti-k3-image-gen" > + select BR2_TARGET_TI_K3_R5_LOADER > + help > + Use TI's k3-image-gen to build a separate bare metal > + boot binary from a separate spl. Currently supports > + version 08.04.00.005 as default. > + > + https://git.ti.com/cgit/k3-image-gen/k3-image-gen/ Same comment as for the patch 1/3, use "if BR2_TARGET_TI_K3_IMAGE_GEN" here. > + > +config BR2_TARGET_TI_K3_IMAGE_GEN_SOC > + string "SOC type for image gen" > + depends on BR2_TARGET_TI_K3_IMAGE_GEN > + help > + The target SoC option for image gen. > + For example, "am64x" for AM64X boards. > + > +config BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG > + string "CONFIG type for image gen" > + depends on BR2_TARGET_TI_K3_IMAGE_GEN > + help > + The board config option for image gen. > + Usually "sk" or "evm". > + > diff --git a/boot/ti-k3-image-gen/ti-k3-image-gen.hash b/boot/ti-k3-image-gen/ti-k3-image-gen.hash > new file mode 100644 > index 0000000000..e307a02a67 > --- /dev/null > +++ b/boot/ti-k3-image-gen/ti-k3-image-gen.hash > @@ -0,0 +1,2 @@ > +# Locally calculated > +sha256 e585dc868ada21ef3389159541d669b88bc406b453470e92da85d9222d271c96 k3-image-gen-08.04.00.005.tar.gz Since it's a tool released by TI, it would be great if the hash can be provided in the release note. > diff --git a/boot/ti-k3-image-gen/ti-k3-image-gen.mk b/boot/ti-k3-image-gen/ti-k3-image-gen.mk > new file mode 100644 > index 0000000000..1f97490392 > --- /dev/null > +++ b/boot/ti-k3-image-gen/ti-k3-image-gen.mk > @@ -0,0 +1,33 @@ > +################################################################################ > +# > +# ti-k3-image-gen > +# > +################################################################################ > + > +TI_K3_IMAGE_GEN_VERSION = 08.04.00.005 > +TI_K3_IMAGE_GEN_SITE = https://git.ti.com/cgit/k3-image-gen/k3-image-gen/snapshot > +TI_K3_IMAGE_GEN_SOURCE = k3-image-gen-$(TI_K3_IMAGE_GEN_VERSION).tar.gz > +TI_K3_IMAGE_GEN_LICENSE = BSD-3-Clause > +TI_K3_IMAGE_GEN_LICENSE_FILES = system-firmware-image-gen-1.0-manifest.html It seems the BSD-3-Clause is not the only license of this tool. The manifest file is also about GPL-2.0, TI Text File License, TI Commercial License. Can you clarify the licensing info ? Also the manifest file hash should be listed in ti-k3-image-gen.hash (Actually having an html file as license file may not really practical in the end, can you provide a LICENSE or COPYING file ?) > +TI_K3_IMAGE_GEN_INSTALL_IMAGES = YES > +TI_K3_IMAGE_GEN_DEPENDENCIES = host-arm-gnu-toolchain ti-k3-r5-loader The build dependency on ti-k3-r5-loader may not be obvious, maybe add a comment to say that ti-k3-image needs r5-u-boot-spl.bin to build. > +TI_K3_IMAGE_GEN_MAKE = $(BR2_MAKE) Why do you really need this? This is only required when the build system requires make 4.0+. If yes, add a small comment. > +TI_K3_IMAGE_GEN_SOC = $(call qstrip,$(BR2_TARGET_TI_K3_IMAGE_GEN_SOC)) > +TI_K3_IMAGE_GEN_CONFIG = $(call qstrip,$(BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG)) > +TI_K3_IMAGE_GEN_MAKE_OPTS = \ > + SOC=$(TI_K3_IMAGE_GEN_SOC) \ > + CONFIG=$(TI_K3_IMAGE_GEN_CONFIG) \ > + CROSS_COMPILE=$(HOST_ARM_GNU_TOOLCHAIN_INSTALL_DIR)/bin/arm-none-eabi- \ Use $(HOST_DIR) here > + SBL=$(BINARIES_DIR)/r5-u-boot-spl.bin \ > + O=$(BINARIES_DIR) \ > + BIN_DIR=$(BINARIES_DIR) > + > +define TI_K3_IMAGE_GEN_BUILD_CMDS > + $(TI_K3_IMAGE_GEN_MAKE) -C $(@D) $(TI_K3_IMAGE_GEN_MAKE_OPTS) > +endef > + > +define TI_K3_IMAGE_GEN_INSTALL_IMAGES_CMDS > + cp $(@D)/tiboot3.bin $(BINARIES_DIR) > +endef Best regards, Romain > + > +$(eval $(generic-package)) From romain.naour at gmail.com Sat Oct 1 17:47:32 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sat, 1 Oct 2022 19:47:32 +0200 Subject: [Buildroot] [PATCH v5 3/3] board/ti/am64x_sk: add new board In-Reply-To: <20220923205543.1518798-4-gadiyar@ti.com> References: <20220923205543.1518798-1-gadiyar@ti.com> <20220923205543.1518798-4-gadiyar@ti.com> Message-ID: <393a285a-1795-f992-8606-0c6e514992fd@gmail.com> Hello Anand, Le 23/09/2022 ? 22:55, Anand Gadiyar a ?crit?: > From: Xuanhao Shi > > Adds support for ti's am64x_sk board. > Adds the configs for generating output sdcard image. > Adds the defconfigs for am64x_sk. > > The AM64x_sk board is designed for the AM642 SoC with > two ARM Cortex-A53 and four ARM Cortex-R5. It also > supports RJ 45 Ethernet, Wi-Fi, and Bluetooth. > > More information about the board can be found at: > https://www.ti.com/tool/SK-AM64 > > Signed-off-by: Xuanhao Shi > Signed-off-by: Anand Gadiyar > Reviewed-by: Giulio Benetti > --- > DEVELOPERS | 4 +++ > board/ti/am64x_sk/genimage.cfg | 27 +++++++++++++++++++ > board/ti/am64x_sk/readme.txt | 49 ++++++++++++++++++++++++++++++++++ > configs/am64x_sk_defconfig | 45 +++++++++++++++++++++++++++++++ > 4 files changed, 125 insertions(+) > create mode 100644 board/ti/am64x_sk/genimage.cfg > create mode 100644 board/ti/am64x_sk/readme.txt > create mode 100644 configs/am64x_sk_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index 81f095f799..121952369c 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -129,8 +129,10 @@ F: package/libxmlrpc/ > F: package/python-docopt/ > > N: Anand Gadiyar > +F: board/ti/am64x_sk/ > F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > +F: configs/am64x_sk_defconfig > > N: Andr? Zwing > F: package/libkrb5/ > @@ -3068,8 +3070,10 @@ N: Wojciech Nizi?ski > F: package/fwup/ > > N: Xuanhao Shi > +F: board/ti/am64x_sk/ > F: boot/ti-k3-image-gen/ > F: boot/ti-k3-r5-loader/ > +F: configs/am64x_sk_defconfig > > N: Yair Ben Avraham > F: package/casync/ > diff --git a/board/ti/am64x_sk/genimage.cfg b/board/ti/am64x_sk/genimage.cfg > new file mode 100644 > index 0000000000..26304fe98f > --- /dev/null > +++ b/board/ti/am64x_sk/genimage.cfg > @@ -0,0 +1,27 @@ > +image boot.vfat { > + vfat { > + files = { > + "tiboot3.bin", > + "tispl.bin", > + "u-boot.img", > + } > + } > + > + size = 16M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition u-boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + } > +} > diff --git a/board/ti/am64x_sk/readme.txt b/board/ti/am64x_sk/readme.txt > new file mode 100644 > index 0000000000..8096fcb2d4 > --- /dev/null > +++ b/board/ti/am64x_sk/readme.txt > @@ -0,0 +1,49 @@ > +Texas Instuments AM64x SK Test and Development Board > + > +Description > +=========== > + > +These configurations will build a complete image and > +device tree blobs for the the TI AM64x_sk board. > + > +How to build it > +=============== > + > +Select the default configuration for the target: > +$ make am64x_sk_defconfig > + > +Optional: modify the configuration: > +$ make menuconfig > + > +Build: > +$ make > + > +Result of the build: > +=================== > +output/images/ > ++-- soc > ++-- ti-connectivity > ++-- bl31.bin > ++-- boot.vfat > ++-- Image > ++-- k3-am642-sk.dtb > ++-- r5-u-boot-spl.bin > ++-- rootfs.ext2 > ++-- rootfs.ext4 > ++-- rootfs.tar > ++-- sdcard.img > ++-- tee.bin > ++-- tee-header_v2.bin > ++-- tee-pageable_v2.bin > ++-- tee-pager_v2.bin > ++-- tiboot3.bin > ++-- tispl.bin > ++-- u-boot.img > + > +To copy the image file to the sdcard use dd: > +$ dd if=output/images/sdcard.img of=/dev/sdX > + > +Insert the SDcard into the AM64x_sk board, and power it up with > +a USB Type-C connector. The system should come up. You can use > +a micro-USB to connect to the connector labled MAIN_UART0 to > +communicate with the board. > diff --git a/configs/am64x_sk_defconfig b/configs/am64x_sk_defconfig > new file mode 100644 > index 0000000000..1d37b411b3 > --- /dev/null > +++ b/configs/am64x_sk_defconfig > @@ -0,0 +1,45 @@ > +BR2_aarch64=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/am64x_sk/genimage.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19" > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am642-sk" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_PACKAGE_LINUX_FIRMWARE=y > +BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7.0" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="SPD=opteed" > +BR2_TARGET_OPTEE_OS=y > +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y > +BR2_TARGET_OPTEE_OS_PLATFORM="k3" > +BR2_TARGET_TI_K3_IMAGE_GEN=y > +BR2_TARGET_TI_K3_IMAGE_GEN_SOC="am64x" > +BR2_TARGET_TI_K3_IMAGE_GEN_CONFIG="evm" > +BR2_TARGET_TI_K3_R5_LOADER_BOARD="am64x_evm"> +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10-rc1" Same comment as for patch 1/3, use a release version if possible. I have the sk-tda4vm evaluation board. I'll try to do a runtime test. Best regards, Romain > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am64x_evm_a53" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > +# BR2_TARGET_UBOOT_FORMAT_BIN is not set > +BR2_TARGET_UBOOT_FORMAT_IMG=y > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="tispl.bin" > +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="TEE=$(BINARIES_DIR)/tee-pager_v2.bin" > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y From yann.morin.1998 at free.fr Sat Oct 1 17:53:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 19:53:32 +0200 Subject: [Buildroot] [PATCH] or1k: Only define TARGET_HAVE_TLS when HAVE_AS_TLS In-Reply-To: References: <20220929145740.4846-1-shorne@gmail.com> Message-ID: <20221001175332.GN30794@scaer> Stafford, All, On 2022-10-01 11:35 +0000, Stafford Horne spake thusly: > On Thu, Sep 29, 2022 at 03:57:40PM +0100, Stafford Horne wrote: > > This was found when testing buildroot with linuxthreads enabled. In > > this case, the build passes --disable-tls to the toolchain during > > configuration. After building the OpenRISC toolchain it was still > > generating TLS code sequences and causing linker failures such as: > > > > ..../or1k-buildroot-linux-uclibc-gcc -o gpsd-3.24/gpsctl .... -lusb-1.0 -lm -lrt -lnsl > > ..../ld: ..../sysroot/usr/lib/libusb-1.0.so: undefined reference to `__tls_get_addr' > > > > This patch fixes this by disabling tls for the OpenRISC target when requested > > via --disable-tls. > > > > Tested-by: Yann E. MORIN > > > > gcc/ChangeLog: > > > > * config/or1k/or1k.cc (TARGET_HAVE_TLS): Only define if > > HAVE_AS_TLS is defined. > > I have pushed this upstream now. Adding buildroot patches should be easy to do > now. That's great, thanks for fixing this! :-) I'll poke my work alter-ego on Monday to look at providing the backports for Buildroot. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 18:19:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 20:19:38 +0200 Subject: [Buildroot] [RESEND v1 1/1] package/python-scipy: bump version to 1.9.1 In-Reply-To: <20220928193437.13407-1-guillaume.bressaix@gmail.com> References: <20220928193437.13407-1-guillaume.bressaix@gmail.com> Message-ID: <20221001181938.GO30794@scaer> Guillaume, All, On 2022-09-28 21:34 +0200, Guillaume W. Bres spake thusly: > Signed-off-by: Guillaume W. Bres > --- All that is below the triple-dash line will be dropped by git when we apply the patch. However, you provided interesting information in that post-commit-log message... > Scipy is expected to move to a meson build infrastructure > by the next release > > scipy-.tar.xz is no longer released. This should be part of the commit log proper, to explain why you switched to the .tar.gz archive. > For some reason, a new "Python.h" missing header > build time failure arised. I solve it with a -Ipython include. This should also be part of the commit log > Then test script failed, with linker/runtime missing symbols error, > all related to the linear algebra portion (which we do test). > Errors like "undefined reference to __atomic_compare_exchange 8" > regarding > "site-/scipy/optimize/_highs/_highs_wrapper.cpython-310-arm-linux-gnueabi.so" > to be specific. I solved it with a -latomic flag. I see you pass it via CFLAGS; that's not correct, it should be passed via LDFLAGS. If that doesnt work, it should be explained why. Also, we can't arbitrary link agains -latomic, because not all toolchains have it. See cairo.mk for how it should be conditionally used. Regards, Yann E. MORIN. > Once 1.9.2 is out, we know we already have my V3-1.9.1 patch > serie that builds "fine" with meson, it involved a minor tweak > (hopefuly solved by this time). The test script no longer did pass though, > this serie is not 100% ready to go > --- > package/python-scipy/python-scipy.hash | 2 +- > package/python-scipy/python-scipy.mk | 7 +++++-- > 2 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/package/python-scipy/python-scipy.hash b/package/python-scipy/python-scipy.hash > index 0274679c43..1ba239aabf 100644 > --- a/package/python-scipy/python-scipy.hash > +++ b/package/python-scipy/python-scipy.hash > @@ -1,5 +1,5 @@ > # Locally generated > -sha256 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 scipy-1.8.1.tar.xz > +sha256 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 scipy-1.9.1.tar.gz > sha256 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c LICENSE.txt > sha256 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 scipy/linalg/src/lapack_deprecations/LICENSE > sha256 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 scipy/ndimage/LICENSE.txt > diff --git a/package/python-scipy/python-scipy.mk b/package/python-scipy/python-scipy.mk > index a8c23c6c88..1619b9f40a 100644 > --- a/package/python-scipy/python-scipy.mk > +++ b/package/python-scipy/python-scipy.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -PYTHON_SCIPY_VERSION = 1.8.1 > -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz > +PYTHON_SCIPY_VERSION = 1.9.1 > +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz > PYTHON_SCIPY_SITE = https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) > PYTHON_SCIPY_LICENSE = \ > BSD-3-Clause, \ > @@ -36,6 +36,8 @@ PYTHON_SCIPY_INSTALL_STAGING = YES > PYTHON_SCIPY_SETUP_TYPE = setuptools > PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 > > +PYTHON_SCIPY_CFLAGS = \ > + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) > PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ > -L$(PYTHON3_PATH)/site-packages/numpy/core/lib > # -lnpyrandom localization > @@ -44,6 +46,7 @@ PYTHON_SCIPY_LDFLAGS += \ > > PYTHON_SCIPY_ENV = \ > F90=$(TARGET_FC) \ > + CFLAGS="$(PYTHON_SCIPY_CFLAGS) -latomic" \ > LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" > > # Provide system configuration options to numpy distutils extensions, telling > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 18:51:47 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 20:51:47 +0200 Subject: [Buildroot] [PATCH] package/mdio-tools: new package In-Reply-To: <20220928192324.1279960-1-robimarko@gmail.com> References: <20220928192324.1279960-1-robimarko@gmail.com> Message-ID: <20221001185147.GP30794@scaer> Robert, All, On 2022-09-28 21:23 +0200, Robert Marko spake thusly: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- [--SNIP--] > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > new file mode 100644 > index 0000000000..e4ea6f8224 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,16 @@ > +################################################################################ > +# > +# mdio-tools > +# > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0-only We do not strictly follow the SPDX nomenclature (because we somewhat predate it), so for consistency, this should be just 'GPL-2.0'. > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = libmnl mdio-tools uses pkg-config to look for libmnl, so you also need to add host-pkgconf to the _DEPENDENCES. > +MDIO_TOOLS_MODULE_SUBDIRS = kernel I did not have a thorough look, but doesn't mdio-tools need some kernel options to always be enabled? IF so, you can do so with: define MDIO_TOOLS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO) endef (given the package name, it should at least require that, I'd guess, but adapt as needed.) If there had been only the license and host-pkgconf issues, I'd have fixed those when applying. But the kernel options are a bit more involved, and requie someone who actually knows and uses mdio-tools, to come up with the required options. Can you look into that, please? Regards, Yann E. MORIN. > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From robimarko at gmail.com Sat Oct 1 19:05:36 2022 From: robimarko at gmail.com (Robert Marko) Date: Sat, 1 Oct 2022 21:05:36 +0200 Subject: [Buildroot] [PATCH] package/mdio-tools: new package In-Reply-To: <20221001185147.GP30794@scaer> References: <20220928192324.1279960-1-robimarko@gmail.com> <20221001185147.GP30794@scaer> Message-ID: On Sat, 1 Oct 2022 at 20:51, Yann E. MORIN wrote: > > Robert, All, > > On 2022-09-28 21:23 +0200, Robert Marko spake thusly: > > mdio-tools are kernel module and accompanying tools for low-level > > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > > > Userspace tools provide C22 or C45 reads and writes, benchmarking > > and even dedicated Marvell Link Street tools via the included > > kernel module. > > > > Signed-off-by: Robert Marko > > --- > [--SNIP--] > > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > > new file mode 100644 > > index 0000000000..e4ea6f8224 > > --- /dev/null > > +++ b/package/mdio-tools/mdio-tools.mk > > @@ -0,0 +1,16 @@ > > +################################################################################ > > +# > > +# mdio-tools > > +# > > +################################################################################ > > + > > +MDIO_TOOLS_VERSION = 1.2.0 > > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > > +MDIO_TOOLS_LICENSE = GPL-2.0-only > > We do not strictly follow the SPDX nomenclature (because we somewhat > predate it), so for consistency, this should be just 'GPL-2.0'. Hi, I will change it, wasn't really sure what was appropriate so I went with SPDX. > > > +MDIO_TOOLS_LICENSE_FILES = COPYING > > +MDIO_TOOLS_DEPENDENCIES = libmnl > > mdio-tools uses pkg-config to look for libmnl, so you also need to add > host-pkgconf to the _DEPENDENCES. Will fixup in v2. > > > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > > I did not have a thorough look, but doesn't mdio-tools need some kernel > options to always be enabled? IF so, you can do so with: > > define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO) > endef > > (given the package name, it should at least require that, I'd guess, but > adapt as needed.) Thanks for reminding me of this, haven't really though of that, but as far as I can tell it basically needs generic netlink which gets compiled if CONFIG_NET is set, that is minimum. CONFIG_MDIO_DEVICE is then required so that mdio buses actually can be used. > > If there had been only the license and host-pkgconf issues, I'd have > fixed those when applying. But the kernel options are a bit more > involved, and requie someone who actually knows and uses mdio-tools, to > come up with the required options. Can you look into that, please? Will fix this up v2, thanks for the review. Regards, Robert > > Regards, > Yann E. MORIN. > > > +$(eval $(kernel-module)) > > +$(eval $(autotools-package)) > > -- > > 2.37.3 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:07:02 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:07:02 +0200 Subject: [Buildroot] [PATCH] package/linux-tools: Exclude checking PE binaries from perf test In-Reply-To: References: <20220927221133.594071-1-f.fainelli@gmail.com> <20220928233856.77bb191c@windsurf> Message-ID: <20221001190702.GQ30794@scaer> Florian, All, On 2022-09-28 15:28 -0700, Florian Fainelli spake thusly: > On 9/28/22 14:38, Thomas Petazzoni wrote: > >On Tue, 27 Sep 2022 15:11:33 -0700 > >Florian Fainelli wrote: > >>Since upstream Linux commit ed21d6d7c48e6e96c2d617e304a7ebfbd17b1807 > >>("perf tests: Add test for PE binary format support") present in >= > >>v5.10 there is an unconditional installation of PE binaries which will > >>be rejected by the check-bin-arch script. > >> > >>Make sure that these binaries are excluded from being checked to allow > >>the installation of the perf tests. > >> > >>Fixes: 6fcdaa4c5096 ("package/linux-tools: Allow installation of perf scripts") > >>Signed-off-by: Florian Fainelli > > > >Thanks for the patch! Before merging it, I'd like to understand a > >little bit more how readelf behaves for these PE files. Indeed in > >check-bin-arch, we are doing: > > > > arch=$(LC_ALL=C ${readelf} -h "${TARGET_DIR}/${f}" 2>&1 | \ > > sed -r -e '/^ Machine: +(.+)/!d; s//\1/;' | head -1) > > > > # If no architecture found, assume it was not an ELF file > > if test "${arch}" = "" ; then > > continue > > fi > > > >for a PE file, I would expect readelf to badly fail, and therefore > >${arch} to be empty, and the file simply ignored. > > > >What is the behavior/output of readelf on these PE files? > > If I use my host system readelf which is packaged from > binutils-x86-64-linux-gnu, I get no output and all is well, however when > check-bin-arch is called and it uses $(TARGET_READELF), I do get: > > ./host/bin/aarch64-linux-readelf -h > build/linux-custom/tools/perf/tests/pe-file.exe | sed -r -e '/^ Machine: > +(.+)/!d; s//\1/;' | head -1 > IMAGE_FILE_MACHINE_AMD64 (0x8664) > > which is what prompted me to issue this patch in the first place. > > I should mention that the readelf binary in this case is the LLVM Object > Reader and it does support PE/COFF which is probably why it even remotely > attempts to parse the file. OK, but isn't that flawed? It is named 'readelf', so I would expect it to not report on non-ELF files, at least by default (i.e. unless a specific option flag is passed). If a readelf tool does not behave like a readelf tool should behave, isn't that a bug in that specific readelf tool to begin with? Otherwise, it is very intriguing how you managed to have a toolchain without gcc et al, be usable for Buildroot that only knows about the GNU ecosystem. Is that a publicly available toolchain? Can you share the recipe how that toolchain was generated? Do you have special, local changes in Buildroot to accomodate that toolchain? Will you submit those changes? That would allow adding more testing to avoid such issue in the future. Otherwise, I am not fan of adding such exclusion for private cases that we can not (easily) reproduce, as those cases are not supported. Regards, Yann E. MORIN. > -- > Florian > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:15:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:15:18 +0200 Subject: [Buildroot] [git commit] package/dnsmasq: security bump to version 2.87 Message-ID: <20221001191532.8339286703@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=22d6788619b17ebbe90eeccf7d754a45ab10c05a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From yann.morin.1998 at free.fr Sat Oct 1 19:16:24 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:16:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/dnsmasq: security bump to version 2.87 In-Reply-To: <20220927184401.12423-1-fontaine.fabrice@gmail.com> References: <20220927184401.12423-1-fontaine.fabrice@gmail.com> Message-ID: <20221001191624.GR30794@scaer> Fabrice, All, On 2022-09-27 20:44 +0200, Fabrice Fontaine spake thusly: > - Fix CVE-2022-0934: > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html > - Drop patches (already in version) > - Update hash of COPYING, slight updates: > https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 > > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...-src-option.c-fix-build-with-gcc-4.8.patch | 52 ----------------- > ...9080ff8743133fbd52427b4b2213171-typo.patch | 36 ------------ > ...-not-DNSSEC-compile-options-selected.patch | 34 ----------- > ...src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ------------------- > package/dnsmasq/dnsmasq.hash | 6 +- > package/dnsmasq/dnsmasq.mk | 2 +- > 6 files changed, 4 insertions(+), 183 deletions(-) > delete mode 100644 package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > delete mode 100644 package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > delete mode 100644 package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > delete mode 100644 package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > > diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > deleted file mode 100644 > index 50ecf2f18a..0000000000 > --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch > +++ /dev/null > @@ -1,52 +0,0 @@ > -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Fri, 31 Dec 2021 17:29:44 +0100 > -Subject: [PATCH] src/option.c: fix build with gcc 4.8 > - > -Fix the following build failure with gcc 4.8 raised since version 2.86: > - > -option.c: In function 'one_opt': > -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode > - for (char *p = arg; *p; p++) { > - ^ > -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code > -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode > - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > - ^ > - > -Fixes: > - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] > ---- > - src/option.c | 6 ++++-- > - 1 file changed, 4 insertions(+), 2 deletions(-) > - > -diff --git a/src/option.c b/src/option.c > -index ff54def..c57f6d8 100644 > ---- a/src/option.c > -+++ b/src/option.c > -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - arg += 9; > - if (strlen(arg) != 16) > - ret_err(gen_err); > -- for (char *p = arg; *p; p++) { > -+ char *p; > -+ for (*p = arg; *p; p++) { > - if (!isxdigit((int)*p)) > - ret_err(gen_err); > - } > -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - > - u8 *u = daemon->umbrella_device; > - char word[3]; > -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > -+ u8 i; > -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { > - memcpy(word, &(arg[0]), 2); > - *u++ = strtoul(word, NULL, 16); > - } > --- > -2.33.0 > - > diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > deleted file mode 100644 > index 8cdf5b3f1b..0000000000 > --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch > +++ /dev/null > @@ -1,36 +0,0 @@ > -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 > -From: Simon Kelley > -Date: Sat, 1 Jan 2022 23:03:26 +0000 > -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. > - > -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] > -Signed-off-by: Fabrice Fontaine > ---- > - src/option.c | 4 ++-- > - 1 file changed, 2 insertions(+), 2 deletions(-) > - > -diff --git a/src/option.c b/src/option.c > -index c57f6d8..6f56ce8 100644 > ---- a/src/option.c > -+++ b/src/option.c > -@@ -357,7 +357,7 @@ static const struct myoption opts[] = > - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, > - { "dynamic-host", 1, 0, LOPT_DYNHOST }, > - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, > -- { "umbrella", 2, 0, LOPT_UMBRELLA }, > -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, > - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, > - { NULL, 0, 0, 0 } > - }; > -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma > - if (strlen(arg) != 16) > - ret_err(gen_err); > - char *p; > -- for (*p = arg; *p; p++) { > -+ for (p = arg; *p; p++) { > - if (!isxdigit((int)*p)) > - ret_err(gen_err); > - } > --- > -2.33.0 > - > diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > deleted file mode 100644 > index 9c98af2be5..0000000000 > --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch > +++ /dev/null > @@ -1,34 +0,0 @@ > -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 > -From: Simon Kelley > -Date: Tue, 28 Sep 2021 23:42:15 +0100 > -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile > - options selected. > - > -[Retrieved from: > -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] > -Signed-off-by: Fabrice Fontaine > ---- > - src/dnsmasq.h | 5 ++++- > - 1 file changed, 4 insertions(+), 1 deletion(-) > - > -diff --git a/src/dnsmasq.h b/src/dnsmasq.h > -index c8a918a..3fdc1b0 100644 > ---- a/src/dnsmasq.h > -+++ b/src/dnsmasq.h > -@@ -1173,9 +1173,12 @@ extern struct daemon { > - char *packet; /* packet buffer */ > - int packet_buff_sz; /* size of above */ > - char *namebuff; /* MAXDNAME size buffer */ > -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) > -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ > -+ char *workspacename; > -+#endif > - #ifdef HAVE_DNSSEC > - char *keyname; /* MAXDNAME size buffer */ > -- char *workspacename; /* ditto */ > - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ > - int rr_status_sz; > - int dnssec_no_time_check; > --- > -2.20.1 > - > diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > deleted file mode 100644 > index 90bb02b23a..0000000000 > --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch > +++ /dev/null > @@ -1,57 +0,0 @@ > -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sun, 2 Jan 2022 21:57:52 +0100 > -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 > - > -Fix the following build failure: > - > -pattern.c: In function 'is_valid_dns_name': > -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode > - for (const char *c = value;; c++) > - ^ > -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code > -pattern.c: In function 'is_valid_dns_name_pattern': > -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode > - for (const char *c = value;; c++) > - ^ > - > -Signed-off-by: Fabrice Fontaine > -[Retrieved from: > -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] > ---- > - src/pattern.c | 8 ++++---- > - 1 file changed, 4 insertions(+), 4 deletions(-) > - > -diff --git a/src/pattern.c b/src/pattern.c > -index 03e23b9..928d259 100644 > ---- a/src/pattern.c > -+++ b/src/pattern.c > -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) > - > - size_t num_bytes = 0; > - size_t num_labels = 0; > -- const char *label = NULL; > -+ const char *c, *label = NULL; > - int is_label_numeric = 1; > -- for (const char *c = value;; c++) > -+ for (c = value;; c++) > - { > - if (*c && > - *c != '-' && *c != '.' && > -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) > - > - size_t num_bytes = 0; > - size_t num_labels = 0; > -- const char *label = NULL; > -+ const char *c, *label = NULL; > - int is_label_numeric = 1; > - size_t num_wildcards = 0; > - int previous_label_has_wildcard = 1; > -- for (const char *c = value;; c++) > -+ for (c = value;; c++) > - { > - if (*c && > - *c != '*' && /* Wildcard. */ > --- > -2.20.1 > - > diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash > index 804012821e..78127ca714 100644 > --- a/package/dnsmasq/dnsmasq.hash > +++ b/package/dnsmasq/dnsmasq.hash > @@ -1,6 +1,6 @@ > # Locally calculated after checking pgp signature > -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc > -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz > +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc > +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz > # Locally calculated > -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 > diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk > index 230e4a8116..46a40c4bbb 100644 > --- a/package/dnsmasq/dnsmasq.mk > +++ b/package/dnsmasq/dnsmasq.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -DNSMASQ_VERSION = 2.86 > +DNSMASQ_VERSION = 2.87 > DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz > DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq > DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:34:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:34:14 +0200 Subject: [Buildroot] [PATCH] package/sleef: add new package In-Reply-To: <20220927142604.17035-1-kk@aibs.ru> References: <20220927142604.17035-1-kk@aibs.ru> Message-ID: <20221001193414.GS30794@scaer> Kirill, All, On 2022-09-27 17:26 +0300, Kirill Kranke spake thusly: > SLEEF is a library that implements vectorized versions > of C standard math functions. This library also > includes DFT subroutines. > > https://sleef.org/ > Signed-off-by: Kirill Kranke > --- [--SNIP--] > diff --git a/package/sleef/Config.in b/package/sleef/Config.in > new file mode 100644 > index 0000000000..85f93d384e > --- /dev/null > +++ b/package/sleef/Config.in > @@ -0,0 +1,50 @@ > +config BR2_PACKAGE_SLEEF_ARCH_SUPPORTS > + bool > + default y if BR2_arm > + default y if BR2_aarch64 > + default y if BR2_i386 > + default y if BR2_x86_64 > + default y if BR2_powerpc64 > + > +config BR2_PACKAGE_SLEEF > + bool "sleef" You forgot to add the actual dependency on BR2_PACKAGE_SLEEF_ARCH_SUPPORTS here. > + help > + SLEEF is a library that implements vectorized versions > + of C standard math functions. This library also > + includes DFT subroutines. > + > + https://sleef.org/ If I understand correctly, by default, only the libm is built. This should probably be specified in the help text for the main symbol. > +if BR2_PACKAGE_SLEEF > + > +config BR2_PACKAGE_SLEEF_DFT > + bool "compile dft" > + default n default n is the default, so it should npt be specified. > + help > + libsleefdft will be built The helpe text does not provide much more information that the prompt, so there is no need for the help text, unless we can come up with a better help (see below) So: config BR2_PACKAGE_SLEEF_LIBDFT bool "libsleefdft" help libsleefdft contains functions to perform DFT (discreet Fourrier transform). Adapt as you see fit. And so on for the other options. > +config BR2_PACKAGE_SLEEF_QUAD > + bool "compile quad" > + default n > + help > + libsleefquad will be built > + > +config BR2_PACKAGE_SLEEF_GNUABI_LIBS > + bool "compile gnuabi" > + default y > + help > + libsleefgnuabi will be built > + > +config BR2_PACKAGE_SLEEF_SCALAR_LIB > + bool "compile scalar" > + default n > + help > + libsleefscalar will be built > + > +config BR2_PACKAGE_SLEEF_TESTS > + bool "compile tests" > + default n > + help > + Tests will be built > + > +endif > diff --git a/package/sleef/sleef.hash b/package/sleef/sleef.hash > new file mode 100644 > index 0000000000..51570a5176 > --- /dev/null > +++ b/package/sleef/sleef.hash > @@ -0,0 +1,3 @@ > +# Locally calculated > +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE.txt > +sha256 415ee9b1bcc5816989d3d4d92afd0cd3f9ee89cbd5a33eb008e69751e40438ab sleef-3.5.1.tar.gz > diff --git a/package/sleef/sleef.mk b/package/sleef/sleef.mk > new file mode 100644 > index 0000000000..46bef69f5f > --- /dev/null > +++ b/package/sleef/sleef.mk > @@ -0,0 +1,49 @@ > +################################################################################ > +# > +# sleef > +# > +################################################################################ > + > +SLEEF_VERSION = 3.5.1 > +SLEEF_SITE = $(call github,shibatch,sleef,$(SLEEF_VERSION)) > +SLEEF_LICENSE = BSL-1.0 > +SLEEF_LICENSE_FILES = LICENSE.txt > +SLEEF_SUPPORTS_IN_SOURCE_BUILD = NO > +SLEEF_INSTALL_STAGING = YES > + > +# N.B. Need to use host sleef during cross compilation. > +SLEEF_DEPENDENCIES = host-sleef > +SLEEF_CONF_OPTS += -DNATIVE_BUILD_DIR=$(BUILD_DIR)/host-sleef-$(SLEEF_VERSION)/buildroot-build You will have to explain in the commit log why you need to point to the host-sleef build directory, and why you can't use the installed one, in $(HOST_DIR). Also, a package build directory is accessed with $(HOST_SLEEF_BUILDDIR) and for cmake based packages, it already includes the /buildroot-build sub-directory component: make show-vars |jq .HOST_SLEEF_BUILDDIR Otherwise, it looks good. Except forthe missing explanations about the use of the build directory of the host packag, I could have fixed the rest when applying. Can you elaborate on that part, fix the other minor issues and respin, please? Regards, Yann E. MORIN. > +ifeq ($(BR2_PACKAGE_SLEEF_DFT),y) > +SLEEF_CONF_OPTS += -DBUILD_DFT=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_DFT=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_QUAD),y) > +SLEEF_CONF_OPTS += -DBUILD_QUAD=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_QUAD=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_GNUABI_LIBS),y) > +SLEEF_CONF_OPTS += -DBUILD_GNUABI_LIBS=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_GNUABI_LIBS=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_SCALAR_LIB),y) > +SLEEF_CONF_OPTS += -DBUILD_SCALAR_LIB=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_SCALAR_LIB=OFF > +endif > + > +ifeq ($(BR2_PACKAGE_SLEEF_TESTS),y) > +SLEEF_CONF_OPTS += -DBUILD_TESTS=ON > +else > +SLEEF_CONF_OPTS += -DBUILD_TESTS=OFF > +endif > + > +$(eval $(cmake-package)) > +$(eval $(host-cmake-package)) > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:53:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:53:40 +0200 Subject: [Buildroot] [PATCH] package/python-remi: bump version to 2022.7.27 In-Reply-To: <1664283942-24229-1-git-send-email-gwenj@trabucayre.com> References: <1664283942-24229-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221001195340.GT30794@scaer> Gwenhael, All, On 2022-09-27 15:05 +0200, Gwenhael Goavec-Merou spake thusly: > From: Gwenhael Goavec-Merou > > Signed-off-by: Gwenhael Goavec-Merou Applied to master, thanks. But see below... [--SNIP--] > PYTHON_REMI_LICENSE = Apache-2.0 There is a file named LICENSE in the tree. Could you update our packaging to use that file, and add a hash for it, please? Regards, Yann E. MORIN. > PYTHON_REMI_SETUP_TYPE = setuptools > > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 19:51:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 21:51:39 +0200 Subject: [Buildroot] [git commit] package/python-remi: bump version to 2022.7.27 Message-ID: <20221001195349.D33FD86708@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43a40036154c16e9448bbbcf41ab3b1e296e949a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Yann E. MORIN --- package/python-remi/python-remi.hash | 2 +- package/python-remi/python-remi.mk | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/python-remi/python-remi.hash b/package/python-remi/python-remi.hash index 4e1786a952..82234bbe98 100644 --- a/package/python-remi/python-remi.hash +++ b/package/python-remi/python-remi.hash @@ -1,2 +1,2 @@ # sha256 from https://pypi.org/pypi/remi/json -sha256 c8691f007dc30b91013131b6aded3521c17ef8ec9fdd152a0ad481b8cb793f14 remi-2021.3.2.tar.gz +sha256 542df88e174bbd58fe763c49e5c2116f2c8413c1a934731069ed8c17bb9cd64c remi-2022.7.27.tar.gz diff --git a/package/python-remi/python-remi.mk b/package/python-remi/python-remi.mk index 609e127cf0..7e43c09b00 100644 --- a/package/python-remi/python-remi.mk +++ b/package/python-remi/python-remi.mk @@ -4,9 +4,10 @@ # ################################################################################ -PYTHON_REMI_VERSION = 2021.3.2 +PYTHON_REMI_VERSION = 2022.7.27 PYTHON_REMI_SOURCE = remi-$(PYTHON_REMI_VERSION).tar.gz -PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/c0/99/94bd825cf8baee369b959f76c802a51ccc69d4d62ec113e26db4835f710c +PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/b7/5c/fca9d9273fc9d5f4ca0bc2f387ca19f8ba9979dcb75617d094e575dc2337 + PYTHON_REMI_LICENSE = Apache-2.0 PYTHON_REMI_SETUP_TYPE = setuptools From yann.morin.1998 at free.fr Sat Oct 1 20:30:02 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:30:02 +0200 Subject: [Buildroot] [git commit] package/python-maturin: bump to version 0.13.5 Message-ID: <20221001203201.1988E86712@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6ba3f9a11fe2f5df9dfe760f0211cc58982be82b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index 7babd70111..e2de1123ac 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 33f7cc8cd0a05bdd577afda1482e6bd5e33ad881366b1e9333625e063852cdd7 maturin-0.13.3.tar.gz +sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index b239f282ba..f67f0ef562 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.3 +PYTHON_MATURIN_VERSION = 0.13.5 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/f2/5c/af29a40fde2c8fea1e34e79a5d43e2a4278a685c1c9039c107444f9312d9 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit From yann.morin.1998 at free.fr Sat Oct 1 20:34:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:34:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.5 In-Reply-To: <20220927081045.1059596-1-james.hilliard1@gmail.com> References: <20220927081045.1059596-1-james.hilliard1@gmail.com> Message-ID: <20221001203408.GU30794@scaer> James, All, On 2022-09-27 02:10 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/python-maturin/python-maturin.hash | 2 +- > package/python-maturin/python-maturin.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash > index 7babd70111..e2de1123ac 100644 > --- a/package/python-maturin/python-maturin.hash > +++ b/package/python-maturin/python-maturin.hash > @@ -1,5 +1,5 @@ > # Locally calculated after vendoring > -sha256 33f7cc8cd0a05bdd577afda1482e6bd5e33ad881366b1e9333625e063852cdd7 maturin-0.13.3.tar.gz > +sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz > # Locally computed sha256 checksums > sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache > sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit > diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk > index b239f282ba..f67f0ef562 100644 > --- a/package/python-maturin/python-maturin.mk > +++ b/package/python-maturin/python-maturin.mk > @@ -4,9 +4,9 @@ > # > ################################################################################ > > -PYTHON_MATURIN_VERSION = 0.13.3 > +PYTHON_MATURIN_VERSION = 0.13.5 > PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz > -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/f2/5c/af29a40fde2c8fea1e34e79a5d43e2a4278a685c1c9039c107444f9312d9 > +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 > PYTHON_MATURIN_SETUP_TYPE = setuptools > PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT > PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:53:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:53:54 +0200 Subject: [Buildroot] [PATCH] package/efivar: bump to version 38 In-Reply-To: <20220927105829.760755-1-nunes.erico@gmail.com> References: <20220927105829.760755-1-nunes.erico@gmail.com> Message-ID: <20221001205354.GV30794@scaer> On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Drop backported patches and rebase the ones that are still relevant. > > From version 37 to 38, there is a new build system in place, which is > still custom Makefiles. > It is not cross-compilation friendly and includes host tools, so a > few workarounds are required to prevent things being built or rebuilt > wrongly for host or target. [--SNIP--] > diff --git a/package/efivar/efivar.mk b/package/efivar/efivar.mk > index 8708057b18..aaea33c01d 100644 > --- a/package/efivar/efivar.mk > +++ b/package/efivar/efivar.mk [--SNIP--] > @@ -21,16 +21,36 @@ define EFIVAR_BUILD_CMDS > # $(HOST_CC), otherwise it gets cross-built. > $(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) \ > CFLAGS="$(HOST_CFLAGS) -std=gnu99" \ > - $(MAKE) -C $(@D)/src gcc_cflags= makeguids > + TOPDIR=$(@D) CFLAGS_GCC= \ > + $(MAKE) -C $(@D)/src makeguids > > + # util.o needs to be rebuilt for target > + mv -v $(@D)/src/util.o $(@D)/src/util_host.o This dual build commands hint at the need for a host-efivar package that builds makeguids, and patch src/Makefile to use an existing $(MAKEGUIDS) e.g. (mock diff for the sake of ilustration): +MAKEGUIDS ?= makeguids -$(MAKEGUIDS_OUTPUT) : makeguids -$(MAKEGUIDS_OUTPUT) : guids.txt +$(MAKEGUIDS_OUTPUT) : guids.txt $(MAKEGUIDS) -./makeguids $(LD_DASH_T) guids.txt ... +$(MAKEGUIDS) $(LD_DASH_T) guids.txt ... (yeah, this is very borked, but it's just to explain what I have in mind). > + > + # Some workarounds for cross-compilation: > + # MAKEGUIDS_SOURCES is undefined so it doesn't pick host flags for > + # util.o or attempt to build makeguids again. > + # SUBDIRS is redefined so it skips building docs. > + # LD_DASH_T is redefined as the linker detection fails with Buildroot. > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > AR=$(TARGET_AR) NM=$(TARGET_NM) RANLIB=$(TARGET_RANLIB) \ > $(EFIVAR_MAKE_OPTS) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > + LD_DASH_T=-T \ Those should probably go into EFIVAR_MAKE_OPTS, as EFI_VAR_MAKE_OPTS is already used for EFIVAR_BUILD_CMDS, EFIVAR_INSTALL_TARGET_CMDS, and EFIVAR_STAGING_INSTALL_CMDS. > all > + > + # skip 'all' in install so in staging/target installs it won't try > + # to build everything again due to the workarounds above > + $(SED) 's/install : all/install :/g' $(@D)/src/Makefile This sed is not conditional, and it munges an existing, static file, so it should be done with a patch. Regards, Yann E. MORIN. > endef > > define EFIVAR_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > $(EFIVAR_MAKE_OPTS) \ > DESTDIR="$(STAGING_DIR)" \ > install > @@ -38,6 +58,9 @@ endef > > define EFIVAR_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ > + TOPDIR=$(@D) \ > + MAKEGUIDS_SOURCES= \ > + SUBDIRS=src \ > $(EFIVAR_MAKE_OPTS) \ > DESTDIR="$(TARGET_DIR)" \ > install > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:54:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:54:59 +0200 Subject: [Buildroot] [PATCH] package/efibootmgr: bump to version 18 In-Reply-To: <20220927105835.760768-1-nunes.erico@gmail.com> References: <20220927105835.760768-1-nunes.erico@gmail.com> Message-ID: <20221001205459.GW30794@scaer> Erico, All, On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Drop patches which are already applied upstream. > > Signed-off-by: Erico Nunes Does this change depend on the efivar bump, or can it be applied independently? Regards, Yann E. MORIN. > --- > .../0001-Allow-build-with-uClibc.patch | 40 ------------------- > .../efibootmgr/0002-remove-extra-decl.patch | 28 ------------- > package/efibootmgr/efibootmgr.hash | 2 +- > package/efibootmgr/efibootmgr.mk | 2 +- > 4 files changed, 2 insertions(+), 70 deletions(-) > delete mode 100644 package/efibootmgr/0001-Allow-build-with-uClibc.patch > delete mode 100644 package/efibootmgr/0002-remove-extra-decl.patch > > diff --git a/package/efibootmgr/0001-Allow-build-with-uClibc.patch b/package/efibootmgr/0001-Allow-build-with-uClibc.patch > deleted file mode 100644 > index fd29233dc3..0000000000 > --- a/package/efibootmgr/0001-Allow-build-with-uClibc.patch > +++ /dev/null > @@ -1,40 +0,0 @@ > -From bbfcc60497c326576bb23cb01d90115ef3cf6947 Mon Sep 17 00:00:00 2001 > -From: Andy Shevchenko > -Date: Fri, 25 Nov 2016 20:26:52 +0200 > -Subject: [PATCH] Remove unneeded include > - > -This fixes the build with uClibc. > - > -Signed-off-by: Andy Shevchenko > ---- > - src/efibootdump.c | 1 - > - src/eficonman.c | 1 - > - 2 files changed, 2 deletions(-) > - > -diff --git a/src/efibootdump.c b/src/efibootdump.c > -index 6ff8360..7c5a1c5 100644 > ---- a/src/efibootdump.c > -+++ b/src/efibootdump.c > -@@ -19,7 +19,6 @@ > - #include > - #include > - #include > --#include > - #include > - > - #include "error.h" > -diff --git a/src/eficonman.c b/src/eficonman.c > -index 2c2be38..9bfae79 100644 > ---- a/src/eficonman.c > -+++ b/src/eficonman.c > -@@ -17,7 +17,6 @@ > - #include > - #include > - #include > --#include > - #include > - > - #define _(String) gettext (String) > --- > -2.10.2 > - > diff --git a/package/efibootmgr/0002-remove-extra-decl.patch b/package/efibootmgr/0002-remove-extra-decl.patch > deleted file mode 100644 > index f838d50a20..0000000000 > --- a/package/efibootmgr/0002-remove-extra-decl.patch > +++ /dev/null > @@ -1,28 +0,0 @@ > -From 99b578501643377e0b1994b2a068b790d189d5ad Mon Sep 17 00:00:00 2001 > -From: Peter Jones > -Date: Wed, 13 Jun 2018 09:41:01 -0400 > -Subject: [PATCH] remove extra decl > - > -Downloaded from upstream commit > -https://github.com/rhboot/efibootmgr/commit/99b578501643377e0b1994b2a068b790d189d5ad > - > -Signed-off-by: Peter Jones > -Signed-off-by: Bernd Kuhls > ---- > - src/efibootmgr.c | 3 --- > - 1 file changed, 3 deletions(-) > - > -diff --git a/src/efibootmgr.c b/src/efibootmgr.c > -index de38f01..4e1a680 100644 > ---- a/src/efibootmgr.c > -+++ b/src/efibootmgr.c > -@@ -1536,9 +1536,6 @@ parse_opts(int argc, char **argv) > - "invalid numeric value %s\n", > - optarg); > - } > -- /* XXX efivar-36 accidentally doesn't have a public > -- * header for this */ > -- extern int efi_set_verbose(int verbosity, FILE *errlog); > - efi_set_verbose(opts.verbose - 2, stderr); > - break; > - case 'V': > diff --git a/package/efibootmgr/efibootmgr.hash b/package/efibootmgr/efibootmgr.hash > index fdbc9a2732..71a9826331 100644 > --- a/package/efibootmgr/efibootmgr.hash > +++ b/package/efibootmgr/efibootmgr.hash > @@ -1,3 +1,3 @@ > # locally computed hash > -sha256 22a95ebe0d5c9fb2915b3a100450f8f37484d1dbb8b296f55b343cc84f10397d efibootmgr-17.tar.gz > +sha256 442867d12f8525034a404fc8af3036dba8e1fc970998af2486c3b940dfad0874 efibootmgr-18.tar.gz > sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > diff --git a/package/efibootmgr/efibootmgr.mk b/package/efibootmgr/efibootmgr.mk > index 7e09b5f659..672a93c282 100644 > --- a/package/efibootmgr/efibootmgr.mk > +++ b/package/efibootmgr/efibootmgr.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -EFIBOOTMGR_VERSION = 17 > +EFIBOOTMGR_VERSION = 18 > EFIBOOTMGR_SITE = $(call github,rhboot,efibootmgr,$(EFIBOOTMGR_VERSION)) > EFIBOOTMGR_LICENSE = GPL-2.0+ > EFIBOOTMGR_LICENSE_FILES = COPYING > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:56:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:56:56 +0200 Subject: [Buildroot] [git commit] package/acpica: bump to version 20220331 Message-ID: <20221001205715.EC74F86723@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=373fb7fcc963e79bdc08ec62db0d628e4e639476 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Erico Nunes Signed-off-by: Yann E. MORIN --- package/acpica/acpica.hash | 4 ++-- package/acpica/acpica.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash index a2fdfe602e..4b6981c602 100644 --- a/package/acpica/acpica.hash +++ b/package/acpica/acpica.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 8a49904744a8159b7f325ed941b56968ba37a0371c634036628064f97538de4b acpica-unix2-20200717.tar.gz -sha256 cb17c679d3291eba1a70a1336062fb07eec2e839b0821b443b24f41de18c5218 source/include/acpi.h +sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz +sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h diff --git a/package/acpica/acpica.mk b/package/acpica/acpica.mk index 21ecc155be..9901c1ed48 100644 --- a/package/acpica/acpica.mk +++ b/package/acpica/acpica.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPICA_VERSION = 20200717 +ACPICA_VERSION = 20220331 ACPICA_SOURCE = acpica-unix2-$(ACPICA_VERSION).tar.gz ACPICA_SITE = https://acpica.org/sites/acpica/files ACPICA_LICENSE = BSD-3-Clause or GPL-2.0 From yann.morin.1998 at free.fr Sat Oct 1 20:56:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:56:59 +0200 Subject: [Buildroot] [git commit] package/fwts: bump to version 22.09.00 Message-ID: <20221001205716.04F2086724@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=95e9a681e7fd2f823b26c3e70d6b12482f0c33ac branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Erico Nunes Signed-off-by: Yann E. MORIN --- package/fwts/0001-build-do-not-use-Werror.patch | 26 ++++++++++++------------- package/fwts/fwts.hash | 2 +- package/fwts/fwts.mk | 2 +- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/package/fwts/0001-build-do-not-use-Werror.patch b/package/fwts/0001-build-do-not-use-Werror.patch index 715c4f63a5..c6a84537ed 100644 --- a/package/fwts/0001-build-do-not-use-Werror.patch +++ b/package/fwts/0001-build-do-not-use-Werror.patch @@ -1,4 +1,4 @@ -From e481c2f990ffa71f205d4b9daf0823e71269a7f3 Mon Sep 17 00:00:00 2001 +From feb05271b484b158c14611839f968109e9cf3082 Mon Sep 17 00:00:00 2001 From: Erico Nunes Date: Fri, 12 Aug 2016 23:11:56 +0200 Subject: [PATCH] fwts: do not use -Werror @@ -25,7 +25,7 @@ Signed-off-by: Vincent Stehl?? 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac -index f40c3678..0ff5025b 100644 +index ca2f54e2..ed584abf 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ @@ -36,25 +36,25 @@ index f40c3678..0ff5025b 100644 AC_CANONICAL_HOST AC_CONFIG_MACRO_DIR([m4]) diff --git a/src/Makefile.am b/src/Makefile.am -index cdabb386..7c2e5730 100644 +index 3bb35e5c..e9fe92fe 100644 --- a/src/Makefile.am +++ b/src/Makefile.am -@@ -12,7 +12,7 @@ AM_CPPFLAGS = \ - -I$(top_srcdir)/src/acpica/source/compiler \ +@@ -13,7 +13,7 @@ AM_CPPFLAGS = \ -I$(top_srcdir)/efi_runtime \ - -pthread `pkg-config --cflags glib-2.0 gio-2.0` \ + -I$(top_srcdir)/smccc_test \ + -pthread \ - -Wall -Werror -Wextra \ -+ -Wall -Wextra \ ++ -Wall -Wextra \ -Wno-address-of-packed-member \ -Wfloat-equal -Wmissing-declarations \ -Wno-long-long -Wredundant-decls -Wshadow \ diff --git a/src/lib/src/Makefile.am b/src/lib/src/Makefile.am -index 55c52b41..50efa97a 100644 +index d5d53dd7..76c48d4d 100644 --- a/src/lib/src/Makefile.am +++ b/src/lib/src/Makefile.am -@@ -25,7 +25,7 @@ AM_CPPFLAGS = \ - `pkg-config --silence-errors --cflags json-c` \ - `pkg-config --cflags glib-2.0 gio-2.0` \ +@@ -22,7 +22,7 @@ AM_CPPFLAGS = \ + -I$(top_srcdir)/src/acpica/source/include \ + -I$(top_srcdir)/src/acpica/source/compiler \ -DDATAROOTDIR=\"$(datarootdir)\" \ - -Wall -Werror -Wextra \ + -Wall -Wextra \ @@ -62,7 +62,7 @@ index 55c52b41..50efa97a 100644 pkglib_LTLIBRARIES = libfwts.la diff --git a/src/utilities/Makefile.am b/src/utilities/Makefile.am -index 1fc0fc02..53614e33 100644 +index de38f070..785975ff 100644 --- a/src/utilities/Makefile.am +++ b/src/utilities/Makefile.am @@ -16,7 +16,7 @@ @@ -75,5 +75,5 @@ index 1fc0fc02..53614e33 100644 bin_PROGRAMS = kernelscan -- -2.30.2 +2.36.1 diff --git a/package/fwts/fwts.hash b/package/fwts/fwts.hash index 8634980e03..612bc768dd 100644 --- a/package/fwts/fwts.hash +++ b/package/fwts/fwts.hash @@ -1,5 +1,5 @@ # Hash from: http://fwts.ubuntu.com/release/SHA256SUMS -sha256 17d1f0b9639e0f9b092ed8233be2d63d6c44ea8d2a76be0fb5902cc867961374 fwts-V21.11.00.tar.gz +sha256 fee1c323fb9725c2b99c348c434d63196391cad66566d34b42707e55d14d7f25 fwts-V22.09.00.tar.gz # Hash for license file sha256 fbbea748555635dd8c7e6e2f99cddd778f5ee3f9e3510775183bf9799076e5e5 debian/copyright diff --git a/package/fwts/fwts.mk b/package/fwts/fwts.mk index 6634cdc40e..b208aa0c14 100644 --- a/package/fwts/fwts.mk +++ b/package/fwts/fwts.mk @@ -4,7 +4,7 @@ # ################################################################################ -FWTS_VERSION = 21.11.00 +FWTS_VERSION = 22.09.00 FWTS_SOURCE = fwts-V$(FWTS_VERSION).tar.gz FWTS_SITE = http://fwts.ubuntu.com/release FWTS_STRIP_COMPONENTS = 0 From yann.morin.1998 at free.fr Sat Oct 1 20:57:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:57:22 +0200 Subject: [Buildroot] [PATCH] package/acpica: bump to version 20220331 In-Reply-To: <20220927105752.760729-1-nunes.erico@gmail.com> References: <20220927105752.760729-1-nunes.erico@gmail.com> Message-ID: <20221001205722.GX30794@scaer> Erico, All, On 2022-09-27 12:57 +0200, Erico Nunes spake thusly: > Signed-off-by: Erico Nunes Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/acpica/acpica.hash | 4 ++-- > package/acpica/acpica.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash > index a2fdfe602e..4b6981c602 100644 > --- a/package/acpica/acpica.hash > +++ b/package/acpica/acpica.hash > @@ -1,3 +1,3 @@ > # locally computed hash > -sha256 8a49904744a8159b7f325ed941b56968ba37a0371c634036628064f97538de4b acpica-unix2-20200717.tar.gz > -sha256 cb17c679d3291eba1a70a1336062fb07eec2e839b0821b443b24f41de18c5218 source/include/acpi.h > +sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz > +sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h > diff --git a/package/acpica/acpica.mk b/package/acpica/acpica.mk > index 21ecc155be..9901c1ed48 100644 > --- a/package/acpica/acpica.mk > +++ b/package/acpica/acpica.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -ACPICA_VERSION = 20200717 > +ACPICA_VERSION = 20220331 > ACPICA_SOURCE = acpica-unix2-$(ACPICA_VERSION).tar.gz > ACPICA_SITE = https://acpica.org/sites/acpica/files > ACPICA_LICENSE = BSD-3-Clause or GPL-2.0 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 1 20:59:20 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 22:59:20 +0200 Subject: [Buildroot] [PATCH] package/fwts: bump to version 22.09.00 In-Reply-To: <20220927105817.760742-1-nunes.erico@gmail.com> References: <20220927105817.760742-1-nunes.erico@gmail.com> Message-ID: <20221001205920.GY30794@scaer> Erico, All, +Vincent forr the arm support On 2022-09-27 12:58 +0200, Erico Nunes spake thusly: > Signed-off-by: Erico Nunes Applied to master, thanks. Note that we recently allowed fwts to be selectable on arm, see commit 6229a31f8d7e (package/fwts: enable for arm), so with this bump we may get new failures. Please keep an eye on the autobuilder results. Regards, Yann E. MORIN. > --- > .../fwts/0001-build-do-not-use-Werror.patch | 26 +++++++++---------- > package/fwts/fwts.hash | 2 +- > package/fwts/fwts.mk | 2 +- > 3 files changed, 15 insertions(+), 15 deletions(-) > > diff --git a/package/fwts/0001-build-do-not-use-Werror.patch b/package/fwts/0001-build-do-not-use-Werror.patch > index 715c4f63a5..c6a84537ed 100644 > --- a/package/fwts/0001-build-do-not-use-Werror.patch > +++ b/package/fwts/0001-build-do-not-use-Werror.patch > @@ -1,4 +1,4 @@ > -From e481c2f990ffa71f205d4b9daf0823e71269a7f3 Mon Sep 17 00:00:00 2001 > +From feb05271b484b158c14611839f968109e9cf3082 Mon Sep 17 00:00:00 2001 > From: Erico Nunes > Date: Fri, 12 Aug 2016 23:11:56 +0200 > Subject: [PATCH] fwts: do not use -Werror > @@ -25,7 +25,7 @@ Signed-off-by: Vincent Stehl? > 4 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/configure.ac b/configure.ac > -index f40c3678..0ff5025b 100644 > +index ca2f54e2..ed584abf 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -1,5 +1,5 @@ > @@ -36,25 +36,25 @@ index f40c3678..0ff5025b 100644 > AC_CANONICAL_HOST > AC_CONFIG_MACRO_DIR([m4]) > diff --git a/src/Makefile.am b/src/Makefile.am > -index cdabb386..7c2e5730 100644 > +index 3bb35e5c..e9fe92fe 100644 > --- a/src/Makefile.am > +++ b/src/Makefile.am > -@@ -12,7 +12,7 @@ AM_CPPFLAGS = \ > - -I$(top_srcdir)/src/acpica/source/compiler \ > +@@ -13,7 +13,7 @@ AM_CPPFLAGS = \ > -I$(top_srcdir)/efi_runtime \ > - -pthread `pkg-config --cflags glib-2.0 gio-2.0` \ > + -I$(top_srcdir)/smccc_test \ > + -pthread \ > - -Wall -Werror -Wextra \ > -+ -Wall -Wextra \ > ++ -Wall -Wextra \ > -Wno-address-of-packed-member \ > -Wfloat-equal -Wmissing-declarations \ > -Wno-long-long -Wredundant-decls -Wshadow \ > diff --git a/src/lib/src/Makefile.am b/src/lib/src/Makefile.am > -index 55c52b41..50efa97a 100644 > +index d5d53dd7..76c48d4d 100644 > --- a/src/lib/src/Makefile.am > +++ b/src/lib/src/Makefile.am > -@@ -25,7 +25,7 @@ AM_CPPFLAGS = \ > - `pkg-config --silence-errors --cflags json-c` \ > - `pkg-config --cflags glib-2.0 gio-2.0` \ > +@@ -22,7 +22,7 @@ AM_CPPFLAGS = \ > + -I$(top_srcdir)/src/acpica/source/include \ > + -I$(top_srcdir)/src/acpica/source/compiler \ > -DDATAROOTDIR=\"$(datarootdir)\" \ > - -Wall -Werror -Wextra \ > + -Wall -Wextra \ > @@ -62,7 +62,7 @@ index 55c52b41..50efa97a 100644 > > pkglib_LTLIBRARIES = libfwts.la > diff --git a/src/utilities/Makefile.am b/src/utilities/Makefile.am > -index 1fc0fc02..53614e33 100644 > +index de38f070..785975ff 100644 > --- a/src/utilities/Makefile.am > +++ b/src/utilities/Makefile.am > @@ -16,7 +16,7 @@ > @@ -75,5 +75,5 @@ index 1fc0fc02..53614e33 100644 > > bin_PROGRAMS = kernelscan > -- > -2.30.2 > +2.36.1 > > diff --git a/package/fwts/fwts.hash b/package/fwts/fwts.hash > index 8634980e03..612bc768dd 100644 > --- a/package/fwts/fwts.hash > +++ b/package/fwts/fwts.hash > @@ -1,5 +1,5 @@ > # Hash from: http://fwts.ubuntu.com/release/SHA256SUMS > -sha256 17d1f0b9639e0f9b092ed8233be2d63d6c44ea8d2a76be0fb5902cc867961374 fwts-V21.11.00.tar.gz > +sha256 fee1c323fb9725c2b99c348c434d63196391cad66566d34b42707e55d14d7f25 fwts-V22.09.00.tar.gz > > # Hash for license file > sha256 fbbea748555635dd8c7e6e2f99cddd778f5ee3f9e3510775183bf9799076e5e5 debian/copyright > diff --git a/package/fwts/fwts.mk b/package/fwts/fwts.mk > index 6634cdc40e..b208aa0c14 100644 > --- a/package/fwts/fwts.mk > +++ b/package/fwts/fwts.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -FWTS_VERSION = 21.11.00 > +FWTS_VERSION = 22.09.00 > FWTS_SOURCE = fwts-V$(FWTS_VERSION).tar.gz > FWTS_SITE = http://fwts.ubuntu.com/release > FWTS_STRIP_COMPONENTS = 0 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sat Oct 1 21:06:15 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:06:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20221001165241.GM30794@scaer> References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> <20221001165241.GM30794@scaer> Message-ID: Hi, Le sam. 1 oct. 2022 ? 18:52, Yann E. MORIN a ?crit : > Fabrice, All, > > On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > > Denial of service attack and buffer overflow against TLS 1.3 > > servers using session ticket resumption. When built with > > --enable-session-ticket and making use of TLS 1.3 server code in > > wolfSSL, there is the possibility of a malicious client to craft a > > malformed second ClientHello packet that causes the server to crash. > > This issue is limited to when using both --enable-session-ticket and TLS > > 1.3 on the server side. Users with TLS 1.3 servers, and having > > --enable-session-ticket, should update to the latest version of wolfSSL. > > I see that we are not explicitly using either --enable or > --disable-session-ticket, so what is the default, and were we impacted? > session-ticket is disabled by default. Moreover, session-ticket is enabled if nginx, wpas, haproxy or lighty is enabled (but all of them are disabled). So, we were not impacted except if the user has explicitly enabled this option in its own tree. > > Also, we should have an explicit setting for that, rather than leave it > to chance. > Why not, but wolfssl has a ton of options, should we also explicitly set them to false even if they are disabled by default? > > > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > > > > Signed-off-by: Fabrice Fontaine > > Applied to master, thanks. > > Regards, > Yann E. MORIN. > > > --- > > package/wolfssl/wolfssl.hash | 2 +- > > package/wolfssl/wolfssl.mk | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash > > index f1401e4cda..3849ffb9fc 100644 > > --- a/package/wolfssl/wolfssl.hash > > +++ b/package/wolfssl/wolfssl.hash > > @@ -1,5 +1,5 @@ > > # Locally computed: > > -sha256 > c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f > wolfssl-5.5.0.tar.gz > > +sha256 > 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 > wolfssl-5.5.1.tar.gz > > > > # Hash for license files: > > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > > diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk > > index ca360312c9..95d4f47952 100644 > > --- a/package/wolfssl/wolfssl.mk > > +++ b/package/wolfssl/wolfssl.mk > > @@ -4,7 +4,7 @@ > > # > > > ################################################################################ > > > > -WOLFSSL_VERSION = 5.5.0 > > +WOLFSSL_VERSION = 5.5.1 > > WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) > > WOLFSSL_INSTALL_STAGING = YES > > > > -- > > 2.35.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' > conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ > | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is > no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v > conspiracy. | > > '------------------------------^-------^------------------^--------------------' > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 1 21:21:14 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:21:14 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 Message-ID: <20221001212114.11912-1-fontaine.fabrice@gmail.com> - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index b1494d7596..abc3100e6d 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 1 21:29:37 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:29:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/xz: bump to version 5.2.7 Message-ID: <20221001212938.25577-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 Signed-off-by: Fabrice Fontaine --- package/xz/xz.hash | 3 +-- package/xz/xz.mk | 6 +----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/package/xz/xz.hash b/package/xz/xz.hash index 9577e98e80..3aa68791fd 100644 --- a/package/xz/xz.hash +++ b/package/xz/xz.hash @@ -1,6 +1,5 @@ # Locally calculated after checking pgp signature -sha256 5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df xz-5.2.5.tar.bz2 -sha256 98c6cb1042284fe704ec30083f3fc87364ce9ed2ea51f62bbb0ee9d3448717ec xzgrep-ZDI-CAN-16587.patch +sha256 b65f1d0c2708e57716f4dd2216989a73847ac6fdb4168ffceb155767e22b834b xz-5.2.7.tar.bz2 # Hash for license files sha256 bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c COPYING diff --git a/package/xz/xz.mk b/package/xz/xz.mk index cdb01e06a9..004eea94b2 100644 --- a/package/xz/xz.mk +++ b/package/xz/xz.mk @@ -4,7 +4,7 @@ # ################################################################################ -XZ_VERSION = 5.2.5 +XZ_VERSION = 5.2.7 XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2 XZ_SITE = https://tukaani.org/xz XZ_INSTALL_STAGING = YES @@ -13,10 +13,6 @@ XZ_LICENSE = Public Domain, GPL-2.0+, GPL-3.0+, LGPL-2.1+ XZ_LICENSE_FILES = COPYING COPYING.GPLv2 COPYING.GPLv3 COPYING.LGPLv2.1 XZ_CPE_ID_VENDOR = tukaani -XZ_PATCH = xzgrep-ZDI-CAN-16587.patch -# xzgrep-ZDI-CAN-16587.patch -XZ_IGNORE_CVES += CVE-2022-1271 - ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) XZ_CONF_OPTS += --enable-threads else -- 2.35.1 From yann.morin.1998 at free.fr Sat Oct 1 21:15:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:15:58 +0200 Subject: [Buildroot] [git commit] package/volk: needs C++17, not boost Message-ID: <20221001213928.61BF486741@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66215faa5237e3704d55ff171537468079dda9c4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since volk 2.5.1, C++17 is required, and no Boost component is used anymore. Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN --- package/volk/Config.in | 9 ++------- package/volk/volk.mk | 2 +- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 95b4a8bdb5..83d58d64ab 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,20 +1,15 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK bool "volk" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() - depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem - select BR2_PACKAGE_BOOST - select BR2_PACKAGE_BOOST_FILESYSTEM - select BR2_PACKAGE_BOOST_SYSTEM help VOLK is the Vector-Optimized Library of Kernels. It is a library that contains kernels of hand-written SIMD code diff --git a/package/volk/volk.mk b/package/volk/volk.mk index e7b004b87f..1b36ea69c8 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -15,7 +15,7 @@ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO # host-python-mako are needed for volk to compile -VOLK_DEPENDENCIES = host-python3 host-python-mako boost +VOLK_DEPENDENCIES = host-python3 host-python-mako VOLK_CONF_OPTS = \ -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ From yann.morin.1998 at free.fr Sat Oct 1 21:37:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:37:32 +0200 Subject: [Buildroot] [git commit] package/volk: bump to version 2.5.2 Message-ID: <20221001213928.75F3586744@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=be14b55e838f2e0f9664b0372b3d9ac00a5a8518 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN --- package/volk/volk.hash | 2 +- package/volk/volk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/volk/volk.hash b/package/volk/volk.hash index 0ec96d22ff..4c62c6d315 100644 --- a/package/volk/volk.hash +++ b/package/volk/volk.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 3f092737006ad2b7d24852833cf040e725c6f47d68ec2f4197895f84c6400bd8 volk-2.5.1.tar.xz +sha256 eff53206cd1ec3314755e0b2bde3c7aaea21dd0f0ad8d753bff07d98e93ddee2 volk-2.5.2.tar.xz sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING sha256 258f450f060a161fb9f9e2e7c07c6b1ee73e5142297e6792dc1ee76b028cf0ca COPYING-LGPL diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 038b85ee86..5e2e50ae73 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -4,7 +4,7 @@ # ################################################################################ -VOLK_VERSION = 2.5.1 +VOLK_VERSION = 2.5.2 VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some From yann.morin.1998 at free.fr Sat Oct 1 21:35:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:35:46 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information Message-ID: <20221001213928.6B43A86743@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0a397fa6381a4115be22ee9637746bf8c8e1194e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the LGPL-3.0+, which is still not completely done 5by some large margin), so it is still covered by the GPL-3.0+, but has parts already covered by the LGPL-3.0+. We so far only listed GPL-3.0+, but we also had the license file for the LGPL-3.0+. Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of the GPL-3.0+, so we already had it listed (note: the package has a COPYING-GPL, but i's a symlink to COPYING). Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: - split out to its own patch - explain why we don't add COPYING-GPL ] Signed-off-by: Yann E. MORIN --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 1b36ea69c8..038b85ee86 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From fontaine.fabrice at gmail.com Sat Oct 1 21:41:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 1 Oct 2022 23:41:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: bump to version 1.16.1 Message-ID: <20221001214156.37988-1-fontaine.fabrice@gmail.com> Refresh patch https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 Signed-off-by: Fabrice Fontaine --- package/libdnet/0001-python-makefile.patch | 6 ++++-- package/libdnet/libdnet.hash | 2 +- package/libdnet/libdnet.mk | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/libdnet/0001-python-makefile.patch b/package/libdnet/0001-python-makefile.patch index eae22b2f14..e5526482ed 100644 --- a/package/libdnet/0001-python-makefile.patch +++ b/package/libdnet/0001-python-makefile.patch @@ -6,6 +6,8 @@ Subject: [PATCH] python makefile Signed-off-by: Peter Korsgaard [adam: refresh for 1.14; make it git-formatted] Signed-off-by: Adam Duskett +[Fabrice: updated for 1.16.1] +Signed-off-by: Fabrice Fontaine --- python/Makefile.am | 1 + 1 file changed, 1 insertion(+) @@ -15,9 +17,9 @@ index 1a74ef2..59fe0f3 100644 --- a/python/Makefile.am +++ b/python/Makefile.am @@ -11,6 +11,7 @@ $(srcdir)/dnet.c: $(srcdir)/dnet.pyx - pyrexc $(srcdir)/dnet.pyx - python-build: $(srcdir)/dnet.c + + python-build: + CC="$(CC)" LDSHARED="$(CC) -shared" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" $(PYTHON) setup.py build_ext -I$(PYINCDIR) -L$(PYLIBDIR) $(PYTHON) setup.py build touch python-build diff --git a/package/libdnet/libdnet.hash b/package/libdnet/libdnet.hash index d322a1cc29..c31ec90596 100644 --- a/package/libdnet/libdnet.hash +++ b/package/libdnet/libdnet.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 592599c54a57102a177270f3a2caabda2c2ac7768b977d7458feba97da923dfe libdnet-1.14.tar.gz +sha256 b151c4913758ef80daf4558361b4f2680a37b01d59272625bb78c77183062c63 libdnet-1.16.1.tar.gz sha256 6b46ec86e290066c47b6607d322135b3c473566e7225ac23d35a7c0588a82da6 LICENSE diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 4c58ea20a5..1e75dae323 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDNET_VERSION = 1.14 +LIBDNET_VERSION = 1.16.1 LIBDNET_SITE = $(call github,ofalk,libdnet,libdnet-$(LIBDNET_VERSION)) LIBDNET_LICENSE = BSD-3-Clause LIBDNET_LICENSE_FILES = LICENSE -- 2.35.1 From yann.morin.1998 at free.fr Sat Oct 1 21:41:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 1 Oct 2022 23:41:57 +0200 Subject: [Buildroot] [PATCH] package/volk: bump version to 2.5.2 In-Reply-To: <1664265949-22692-1-git-send-email-gwenj@trabucayre.com> References: <1664265949-22692-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221001214157.GZ30794@scaer> Gwenhael, All, On 2022-09-27 10:05 +0200, Gwenhael Goavec-Merou spake thusly: > From: Gwenhael Goavec-Merou > > - with this release boost has been dropped: all select BR2_PACKAGE_BOOST_XXX > are removed > - volk now uses functions only available with c++17: adds a depends on for > gcc > 7.0 > - COPYING-GPL is added to volk.hash > - VOLK_LICENSE is updated with LGPL-3.0+ In fact, the licensing and boost and C++17 changes were already present in the 2.5.2 version, so I've split this patch in three: - drop Boost, require C++17 - fix licensing - bump to 2.5.2 Pleas review the licensing changes, I did quite some substantial rewrites of the corresponding commit log. The three resulting patches: applied to master, thanks. Regards, Yann E. MORIN. > Signed-off-by: Gwenhael Goavec-Merou > --- > package/volk/Config.in | 9 ++------- > package/volk/volk.hash | 3 ++- > package/volk/volk.mk | 8 ++++---- > 3 files changed, 8 insertions(+), 12 deletions(-) > > diff --git a/package/volk/Config.in b/package/volk/Config.in > index 95b4a8bdb5..83d58d64ab 100644 > --- a/package/volk/Config.in > +++ b/package/volk/Config.in > @@ -1,20 +1,15 @@ > comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" > depends on BR2_USE_MMU > - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS > - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ > + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ > !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS > > config BR2_PACKAGE_VOLK > bool "volk" > depends on BR2_INSTALL_LIBSTDCPP > depends on !BR2_STATIC_LIBS > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 > depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL > depends on BR2_USE_MMU # use fork() > - depends on BR2_USE_WCHAR # boost > - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem > - select BR2_PACKAGE_BOOST > - select BR2_PACKAGE_BOOST_FILESYSTEM > - select BR2_PACKAGE_BOOST_SYSTEM > help > VOLK is the Vector-Optimized Library of Kernels. It is a > library that contains kernels of hand-written SIMD code > diff --git a/package/volk/volk.hash b/package/volk/volk.hash > index 0ec96d22ff..b334a7613b 100644 > --- a/package/volk/volk.hash > +++ b/package/volk/volk.hash > @@ -1,4 +1,5 @@ > # Locally computed > -sha256 3f092737006ad2b7d24852833cf040e725c6f47d68ec2f4197895f84c6400bd8 volk-2.5.1.tar.xz > +sha256 eff53206cd1ec3314755e0b2bde3c7aaea21dd0f0ad8d753bff07d98e93ddee2 volk-2.5.2.tar.xz > sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING > +sha256 6dcdafa9e750545f5f65c2e6f53820184822db728ac2b8bfe1d4a47da09ec0d6 COPYING-GPL > sha256 258f450f060a161fb9f9e2e7c07c6b1ee73e5142297e6792dc1ee76b028cf0ca COPYING-LGPL > diff --git a/package/volk/volk.mk b/package/volk/volk.mk > index e7b004b87f..571a5477b1 100644 > --- a/package/volk/volk.mk > +++ b/package/volk/volk.mk > @@ -4,18 +4,18 @@ > # > ################################################################################ > > -VOLK_VERSION = 2.5.1 > +VOLK_VERSION = 2.5.2 > VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) > VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz > # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some > # details on the licensing. > -VOLK_LICENSE = GPL-3.0+ > -VOLK_LICENSE_FILES = COPYING COPYING-LGPL > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ > +VOLK_LICENSE_FILES = COPYING COPYING-GPL COPYING-LGPL > > VOLK_SUPPORTS_IN_SOURCE_BUILD = NO > > # host-python-mako are needed for volk to compile > -VOLK_DEPENDENCIES = host-python3 host-python-mako boost > +VOLK_DEPENDENCIES = host-python3 host-python-mako > > VOLK_CONF_OPTS = \ > -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sat Oct 1 22:22:54 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 1 Oct 2022 16:22:54 -0600 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error Message-ID: <20221001222254.142279-1-james.hilliard1@gmail.com> Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK -- 2.34.1 From judge.packham at gmail.com Sun Oct 2 00:49:30 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 2 Oct 2022 13:49:30 +1300 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 Message-ID: <20221002004931.1805825-1-judge.packham@gmail.com> This is a bug fix release. The changes are: - extmod/machine_i2c: only use WRITE1 option if transfer supports it This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it writes the address to read from. Signed-off-by: Chris Packham --- package/micropython/micropython.hash | 2 +- package/micropython/micropython.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/micropython/micropython.hash b/package/micropython/micropython.hash index 09bc574ebc..7bff7de4e2 100644 --- a/package/micropython/micropython.hash +++ b/package/micropython/micropython.hash @@ -1,3 +1,3 @@ #locally computed -sha256 128b6fb13b518b4d3e75b4f0c04f175dc336c762d8c6360f647e91dc4d25e5d0 micropython-1.19.tar.gz +sha256 c980ad7e742491df0dc10db2958137dbbf9aa7a8009e102fc75f4c0cac2d6b5e micropython-1.19.1.tar.gz sha256 0f678c2abd7fe2cfca36693630506bbcbdfc219bd04bf4a02fe3b094ae4c666f LICENSE diff --git a/package/micropython/micropython.mk b/package/micropython/micropython.mk index f7af9bfc32..51b45e5e99 100644 --- a/package/micropython/micropython.mk +++ b/package/micropython/micropython.mk @@ -4,7 +4,7 @@ # ################################################################################ -MICROPYTHON_VERSION = 1.19 +MICROPYTHON_VERSION = 1.19.1 MICROPYTHON_SITE = $(call github,micropython,micropython,v$(MICROPYTHON_VERSION)) # Micropython has a lot of code copied from other projects, and also a number # of submodules for various libs. However, we don't even clone the submodules, -- 2.37.3 From judge.packham at gmail.com Sun Oct 2 00:49:31 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 2 Oct 2022 13:49:31 +1300 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221002004931.1805825-1-judge.packham@gmail.com> References: <20221002004931.1805825-1-judge.packham@gmail.com> Message-ID: <20221002004931.1805825-2-judge.packham@gmail.com> Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham --- ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 3 files changed, 3 insertions(+), 88 deletions(-) delete mode 100644 package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt -- 2.37.3 From buildroot at athaariq.my.id Sun Oct 2 03:33:09 2022 From: buildroot at athaariq.my.id (buildroot at athaariq.my.id) Date: Sun, 02 Oct 2022 03:33:09 +0000 (UTC) Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> <20221001155615.GA30794@scaer> <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> Message-ID: <8c42038a335a0122dee3365ce1940920@athaariq.my.id> Hello Mr. Morrin, > This issue is really weird, because the glibc commit we are using is > supposed to contain the related fixes Pardon me for being so weird. What I'm trying to fix is this error: ``` /builds/buildroot.org/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/linux/mount.h:92:6: error: multiple definition of ?enum fsconfig_command? 92 | enum fsconfig_command { | ^~~~~~~~~~~~~~~~ In file included from ../../../../libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cpp:62: /builds/buildroot.org/buildroot/output/build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h:249:6: note: previous definition here 249 | enum fsconfig_command | ^~~~~~~~~~~~~~~~ ``` I did spent entire morning last two days ago and I figured out that no matter how do I detect linux/mount.h presence in "sys/mount.h", **enum fsconfig_command** still in clash between linux-headers and glibc. However, the problem only exist in glibc v2.36 whereas no effect when I changed linux version. Thus, linux-headers seems to be declared after glibc. > How is this a buildroot-specific bug? Can you elaborate on that part? > If > it is really a buildroot-related bug, then we want to understand it, > and > fix it, not work around it. Because it successfully compiled in Gentoo but failed when compile Buildroot for Raspberry Pi 4 and Raspberry Pi 3, with default configuration. The reason why I asked "Is this possible on Buildroot?" is to give you two options: 1. If possible, let's make sure linux-headers installed before glibc 2. If not, let's workaround for a while until there's a revelation from upstream > This is exactly what we are doing already, and for as long as Buildroot > has supported building a glibc-ased toolchain, as the kernel headers > are > required to build glibc; see package/glibc/glibc.mk at 28: Well that's interesting. Wonder why that enum redeclaration error exist and my last patch actually works. > To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc > 2.36 commit, and even one older than ours, but they do not seem to have > issues. Honestly, I only tested it on my Raspberry Pi 4 and my friend's Raspberry Pi 3 with latest origin/master and default configuration. Yesterday, I realized that all raspberry boards are symlinked into one directory after checked autobuild. Perhaps, board specific issue? If correct, I'm going to patch the custom kernel instead, plus bump it. I also noticed Raspberry Pi boards are marked ORPH at autobuild. Is that means orphan? If yes, I would gladly contribute as board maintainer. Thank you for your cooperation. Regards, Athaariq Ardhiansyah NB: My nickname is Eric From thomas.petazzoni at bootlin.com Sun Oct 2 06:32:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 02 Oct 2022 06:32:33 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-01 Message-ID: <20221002063238.467C5400EA@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-01 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 2 | 0 | 4 | 2022.05.x | 22 | 12 | 0 | 34 | 2022.08.x | 3 | 0 | 0 | 3 | master | 65 | 162 | 0 | 227 | Classification of failures by reason for master ----------------------------------------------- systemd-250.4 | 9 crun-1.5 | 8 glibc-2.36-44-g2628500f5dff... | 8 sysvinit-2.99 | 7 unknown | 7 autofs-5.1.8 | 6 btrfs-progs-5.16.2 | 5 host-pahole-73383b3a39afe86... | 5 host-sentry-cli-1.59.0 | 5 igd2-for-linux-2.1 | 5 gerbera-1.10.0 | 4 host-binutils-2.39 | 4 google-breakpad-c85eb4a59b6... | 3 host-spirv-llvm-translator-... | 3 linux-5.17.15 | 3 ltp-testsuite-20220527 | 3 coreutils-9.1 | 2 dahdi-linux-5c840cf43838e06... | 2 dash-0.5.11.5 | 2 elfutils-0.186 | 2 gensio-2.5.2 | 2 hdparm-9.63 | 2 host-binutils-2.38 | 2 host-gcc-final-11.3.0 | 2 host-go-1.19.1 | 2 libarchive-3.6.1 | 2 libglib2-2.72.3 | 2 libtorrent-rasterbar-1.2.15 | 2 linux-5.10.109-cip5-rt4 | 2 musl-1.2.3 | 2 open62541-v1.3.3 | 2 quickjs-2021-03-27 | 2 ulog-0389d243352255f6182326... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 assimp-5.2.1 | 1 boost-1.80.0 | 1 brltty-6.4 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 crucible-2022.05.25 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 frr-8.3.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gdal-3.5.1 | 1 gensio-2.5.5 | 1 gmp-6.2.1 | 1 grep-3.7 | 1 host-flex-2.6.4 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-arc-2020.0... | 1 host-moby-buildkit-0.10.0 | 1 host-rust-1.64.0 | 1 igh-ethercat-1.5.2 | 1 libdcadec-0.2.0 | 1 libqb-2.0.6 | 1 libuci-4b3db1179747b6a67790... | 1 libzip-1.9.2 | 1 libzlib-1.2.12 | 1 make: *** Waiting for unfin... | 1 p11-kit-0.24.1 | 1 pcre-8.45 | 1 perl-5.34.1 | 1 php-8.1.9 | 1 proj-8.1.1 | 1 python-ujson-5.2.0 | 1 rhash-1.4.3 | 1 tealdeer-1.5.0 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 wavemon-0.9.4 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/78433fa816d089daef58dde84bc38de55f8c6a36 | nios2 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b7a0638e6bcaa10c4f4d111bebcc51d5dab43dd8 | x86_64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a00652077b4237081564d100e86d78a1c8d09b7c | nios2 | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/f9db16f76c3e10e40ab5090a32032916b2ca555a | ORPH mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2e4af83beb02716c956012045e85ab2ebe5834c2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/76bd0d64081631364daad90f490d61c65b58a929 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/64c2d8b8111f6dbb58862d9e1f5d5def0f10fc09 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/894e473185ec6c55d9f9f8696208ab4213e7c6a9 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a24ded9ed7282e8b32e96f14c93ff9954a724530 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/c5a36a28465b7cf64d3c39104b86983e3563e8af | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/b8fab151d77969e6350dbf3f345f33a90cdeeee9 | mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/49de49349f3670c2357c56fada181ab3fa546f88 | microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dca54eaf9956e98d08c23fc5a6f1f46a42fc4b7a | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b5b15ea1fc61be23d073d342ead863afd04ce008 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e93e0b40baf52c169dad2c59dcfd3ff838767772 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2a16a7b086a38a7bb2c9f75a8715b6aa7cbe53f8 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/34785ce812b49e37abd94c20b684e3abdce5aafe | ORPH s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4496fb3fb0a7b08636e3efd4fd536add46be371d | powerpc64 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/680ad1ed95f7a7522029c55f49a53c9859204cd2 | ORPH sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/b7e56b951addb26845a8ef258a9b55aa99232b09 | ORPH sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/2630ad3ecd6c9fc9bca20de4cee6c6f5b3e2f9db | ORPH i686 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/c6cc040face2cf8917865ab36407c5f6e1f8ba60 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cfe5fe4dbc3bfa97a5e560691ff40c135378bbe9 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4920d7e113d0647a37f0cc8e3999cf54522cc78f | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2ea89ba9d0a3d6bcc011985618e763e6ea45f27c | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/708417bc525c5267759951272c2a4f2b5ce327c4 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5f775ac92242a2a863ac6d40f4f2edf7ebf7fab7 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/944c54e684d40778da72d909403245f4bbd0b291 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b126ce1d01827d960ed0d4c5d45b05321519187e | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f0fe35e76ac95c10658c8d27c89cca63fd927f22 | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5eec218c62fbf6629ced4fc9537e4fa93f84678e | microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f9237df67add2cfab356714863e12b2b28997464 | sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/39edaa92f25fe5028110caed2fe8a37f00c5991f | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/4b05c8e326fc41ed2b67d08c4fb2054184482200 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/cdda3f5cc86eb390c2afe1ea06977d63807d990f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4baedb0d0b9f289b8c99d94b8b2fae5e4b41748c | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/de5f5fdbd4340abc7e7a6a3a6b9c6be36d04533b | ORPH i686 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/908d56d239a6df1e369ed86f5092c8a25985658c | mips | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/4a0b4eadfc19aae05f69ec78621b49e77e308c53 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/054acff406bd2219695fe56912f7d8570c0af9d3 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/9e10618870229ee847877f14e7f6ce4b93ed217c | microblazeel | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/99f55319d7a4476ee7376fa3b26f5039da855d85 | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/0a1b502514ee2671d96e205a18287a582758176d | armeb | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/e4ac33043ee6d63918b75405e0355894ea93af49 | x86_64 | gensio-2.5.2 | NOK | http://autobuild.buildroot.net/results/df4074d47f3a12640ec332420a7b7f6820f61e29 | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5903f917eec509db61a94e1976cee7e2c29fb371 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b004d36b743caf35ac19f0892e0f3876b6f96597 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/947e9df787e2c7561a2e7899bff130d5cc6c5af7 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/00de85570d9e03e537a089945db2f3ab99b8aeb5 | xtensa | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5cc2cd19d7fa4eaf5b5419d65e3f788355fb1dbe | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbf51ce8a66f1740865b5f244d84c96a06158c12 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65da2981532a9471a87cb4d53fb6c700f1d56d6c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ca519ae2e0e9f60295dc9ca097ca90c535b3953 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/deb86d5cb1a4baaaacee11f10da649922ce9b9aa | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab2eaa35733ef38d94514728bbce54ddcffbccf9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d5fdc68b4b7d110a0627162f61cb97cecfa697b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a022ce3f36485ebdd35c373742893ada09a2a1b | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1b358ed4bd6feaa7313b00f29e50dd417f1d083 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/191f95360270e3f9c372e0dcdd498f6e73116606 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/8fad09c37f1983ee6513693489597f59e5ea35cd | arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/eaaaf658179a0b80c394e3950e2210e102aae4dc | arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/9922999cc790fe55a4c5ae30e652dbc5aa1c8c5c | powerpc | grep-3.7 | NOK | http://autobuild.buildroot.net/results/98a1649fe41ef7d7b9604cb304624d43718acd43 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/4a15aba80238c6faf9266c8aaf1282762af09687 | mips | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/8781115a93dd2b9bc416435210e2deae5627a258 | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/690893b6059841fba0873f1561e2aefec5c5dab7 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2efd3b5a6843e3392bf1f938a3a2678e481e40cf | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/488c1b4b0db3f80d47dd7adb659d52e79bb43f52 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/777bef8d9b06ea2fb92c5b7634e05cbb6c187203 | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f1e39e6abd2f2c13a4f7c885168b301caf642cfb | aarch64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/19befb943c64d3b3efb12faa08499100960eda76 | microblaze | host-flex-2.6.4 | NOK | http://autobuild.buildroot.net/results/55599ec38cc6c7331f984410f2276415a99fee97 | ORPH i686 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/3fd437f269bf4ce25f6e2bcbc48d066c15fb7df2 | powerpc64le | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/9d1bfd18a3bd35d892da49b28968df488dfee7c3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5fafa5cc7612bd07f1b69b33f2ddce51491df9c | arceb | host-gcc-initial-arc-2020.0... | NOK | http://autobuild.buildroot.net/results/0177a3ae3ffe74cb17b563dbe395a5b73048f85e | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f69f3463790fe1bdba0548b820b1f595d31d8a62 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/4351dae9b7dd832385ce2168465b2bc28521d44c | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/28b9d8658623e68909d3886f198714a6006b9bde | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/6add4db41f23d31381a19f3492a0389c2857ec51 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8d2d15c0a67cf16a0dd3d5db6a67e438295a1a11 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f70dea4694817ac83c4dd9364808fd0a3eb6f4a7 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74ee8c6d5f1f4d281ab3af262bf74956d9f9eced | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e5ac7d6c5d31876d3b129df1efe48576dc67572f | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/30ed5984876885679be166af43c8f155f607975f | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/609a2bbc379a738ecfae3d4def39e3dbdac7895e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/42526b17aa8f5da6f6045eddc88270e819eb2f91 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/411fda12f71a6dc23e3072d990d4d966859efab6 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b964629c7d3f2893a7cc4aa5b2cc4150ec48e72 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bdcb0c6db801a655b9f0cdff718bf7c4a6c68351 | riscv64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/0373ad884aa9988d986b3e838ecf10ac02fffed4 | ORPH riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/003df37b095dcabfae0d7af6a7d7c085b1280175 | ORPH aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/c866d1f3fef7542b3f6b65b50db7a33dc31c85d8 | ORPH sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8ceca17239fdf05c737ebf694d65d0147a30191c | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e77899390ede54570bd2b48c876de0a7110649e9 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/31737027adcef6b4e3f0dbb9884cdddca6e9af30 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/48fe1a7f37490fc97ad359b6deb7196c0107f03f | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/23d89e0a739f7c066288c06b0c69f887e822dc8c | powerpc64le | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/7f17dbdcb33cee2bef5036f2693c978ef32b63bb | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4996b6e2ad5d54d335ef1f03c1d6a6ea6606e113 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e39a47942f0e3814069922fd45db39f254d72f9f | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/975675a3a22fff9b1565ef61e3c5814b0e404fdf | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/21a337d395999d964d9899ad7bf5eca7414cf34f | armeb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/51ad3269272304fe6cab6abe29268ed95eb52b96 | riscv64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/a1c934679633073f9d9ea5b7d869dac33354ed97 | sh4aeb | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/7b2039b01960123350f7e646b937f0f77393cfdd | microblaze | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/dee4311bda84638b1630111256536f1f613611ff | mipsel | libuci-4b3db1179747b6a67790... | NOK | http://autobuild.buildroot.net/results/bbf723ad014429cc5670bb5ae98e726fc8809e50 | arc | libzip-1.9.2 | NOK | http://autobuild.buildroot.net/results/429d1d28d70ea5286bb84a3f30309a7a01c9d1d3 | mips64 | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/2e6f94b4b3183fc6f7bd0c6d4a72a3b825904317 | ORPH riscv32 | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/fec3aa809f26de8dd1dc62f2db3a7d77d02c567c | ORPH mips64el | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/42522afb83020a33f851b8ec5f49635587fe6fa7 | ORPH armeb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/5effbe7a1810f58d5d43291d048cdad1288b88c5 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/bef2c1bd4861acafa46c88f45098e5bdbb1ee215 | ORPH m68k | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/f9e4360b874cf2fc70d18df0515dc4557bba791f | ORPH arm | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/4a3a08ccce5231eb60240570ac2e25b4c5d0ab42 | sparc64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/61ebd609c774a2c6c284e75f611405ff923dea35 | sparc64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/e3cc6e3e9d6799181d516bcc037f626240663465 | microblaze | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/42bb86cb112a82ad4ad69421ada234bc6117b95a | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b13472d307b95e025ebef8b461d197cac812edca | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/82bf5f390b7288f3aafbf25867949e28e5585835 | sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/32e5515272da0dccc0d4595afe16743102de8889 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/79c4c8de677f5d4bb65a46eaa567614c6a4c77c6 | ORPH or1k | p11-kit-0.24.1 | NOK | http://autobuild.buildroot.net/results/9ed3c3bfef3ff1eae470d778f748481d4392fda2 | ORPH powerpc64le | pcre-8.45 | NOK | http://autobuild.buildroot.net/results/9583be612aa0e3e0f5fb1d61f062b5e8a216ba7f | ORPH m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/13721b9c65b62cbb0c9d5af940276a3a3bbbb59d | microblazeel | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/e4ce0ad75d6d4aed68c8f9e3cbd6e7b7d6baff1c | or1k | proj-8.1.1 | NOK | http://autobuild.buildroot.net/results/56b38437995abffb6a6db3410018f7bb67666bb9 | arc | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/9f567ba0ffbea97c2458e6c61593c16c7669b3d0 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/c997c76d94dde78f727e5da0d45349a48df49077 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/56d7b6fbf5d654c16b4441d7c6549d589b3793d6 | aarch64 | rhash-1.4.3 | NOK | http://autobuild.buildroot.net/results/7ca7c25d112dfd0097ee84ac5029fb620f395e32 | ORPH sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/94813d7b2cf0df5a94ff828374366e0bf414e5be | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0cf4d783f938543cd380d69525a144e8b2ba612c | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a751cde3f593f5e28afef1c7a5410189e95a5160 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/98e61176460e66bf3aa951bf32b0bb43ee3853d3 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae89cafc1c0922e8949275cc07aa889a89ab9cc8 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/14b10ffeb5dcf162bb4f580310736c1e9d578c86 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cfb535912b1722fb4873cadb037b92d068a63a2e | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/25358774aa15658b3c0e564fe362b0b18177f083 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bca710a8ded22dc552fb0355c9450672eff368c1 | nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/681f327a4dd116d58a2c38d1ad721345e96e2f99 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/239e99fe5b97653d8a4a1f0b4e588cfb2ad0493e | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7ce853bc69304513854209d400e2705b7f0a7cfc | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2dc61ed11b64000d0cb32ac1f848e17ab77cb92a | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/31561022a982509b1641efe86b8f32fdead43da4 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f69897ba7bc9dcc947ff8823c5018fa9c0473455 | ORPH i486 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/50a953a232e621f8508275771ae1e00190532878 | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/aaa806b84de82f32b3b25af9b2d8ba2b98aa1b6e | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/af61755503000c0e81763cf7d76f81b4635b9c18 | sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/38eaa706ffea3d50c877e7987f5a6a1e0090c321 | m68k | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/6d0b126125ffc59b1bbef5fd03bd493308361f66 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/ff72c88b55033c79b064d3ad5bb4e0c9084a0e09 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/eee055d3aad3da35b293deff10e1765ae2ebac6f | m68k | unknown | NOK | http://autobuild.buildroot.net/results/40188dc961698198cee9f1a86442aa84c6b9c1a1 | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/24a2b06343ccdfa10e8e3d504d1354b817a2aea7 | arm | unknown | NOK | http://autobuild.buildroot.net/results/3b650c7ca165c31f55e14e329ca07a127b8a2bc7 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/d597ae77ebc63006be2d5de760752440fcc09aca | i686 | unknown | NOK | http://autobuild.buildroot.net/results/c9400c0ce08237e6f1173c72e0de1f2da8e052f0 | microblazeel | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/e5bd8f968fe75449ab512e6e5b0fbe994a2e6572 | ORPH sparc | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/53f554eae6266df5046341e130c87d1601b6a985 | ORPH sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/fe85f0c829e399a31da46994815126a97fb6dfcf | Classification of failures by reason for 2022.02.x -------------------------------------------------- qt5webkit-5.212.0-alpha4 | 1 weston-10.0.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/2ca7ca0a46b57a79fa553e72dec2643f5458a143 | arm | weston-10.0.1 | NOK | http://autobuild.buildroot.net/results/9f0545fd09ca080249b8e15e5a23eb32f5c5fada | Classification of failures by reason for 2022.05.x -------------------------------------------------- frr-8.2.2 | 2 graphicsmagick-1.3.37 | 2 host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 host-elf2flt-2021.08 | 1 libglib2-2.70.4 | 1 moby-buildkit-0.10.0 | 1 uclibc-1.0.41 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arceb | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/6f229439103565dcf6e4722066bd94873b0c419f | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/947765ab11ae354061a0f02a9eaee406ca3a68d2 | armeb | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/f2eafe5832fc3700afccede085a45b5c2086ad18 | powerpc64 | graphicsmagick-1.3.37 | NOK | http://autobuild.buildroot.net/results/6044ac190ddfeea1cd3f3728382c357698782a61 | riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/0e709b93fd4c2d4f3983e500271ee6470256dd2c | ORPH mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a2636ff71962f6b0a78bb9ee38c8993d27db4f44 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/26b41fdda69379840b66619117edd04db84272c7 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/543471d13f2fb4e2f0f2d59252f3f4bf3cdf2359 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9a9dbaec40e0617ea6e9645d8fcba811c8e264c4 | arc | libglib2-2.70.4 | NOK | http://autobuild.buildroot.net/results/c9f20a8464de74af34ab9882162dd17d5a7ac72d | s390x | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/5922290c6dd405f5fa00b344029ce23c72b7b46b | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/9e24e2afd6dc6a7e9e333d09066174fc96bded22 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 2 07:10:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:10:11 +0200 Subject: [Buildroot] [git commit] package/volk: fix Config.in syntax error Message-ID: <20221002071042.16282866F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d395f49acf5222558601eb6d8300248bf7931051 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK From yann.morin.1998 at free.fr Sun Oct 2 07:11:16 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:11:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error In-Reply-To: <20221001222254.142279-1-james.hilliard1@gmail.com> References: <20221001222254.142279-1-james.hilliard1@gmail.com> Message-ID: <20221002071116.GA30794@scaer> James, All, On 2022-10-01 16:22 -0600, James Hilliard spake thusly: > Fixes: > package/volk/Config.in:4: syntax error > package/volk/Config.in:3: invalid option > > Signed-off-by: James Hilliard Applied to master, thanks for fixing my mess! Regards, Yann E. MORIN. > --- > package/volk/Config.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/volk/Config.in b/package/volk/Config.in > index 83d58d64ab..6a343e0751 100644 > --- a/package/volk/Config.in > +++ b/package/volk/Config.in > @@ -1,6 +1,6 @@ > comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" > depends on BR2_USE_MMU > - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ > + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ > !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS > > config BR2_PACKAGE_VOLK > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 2 07:40:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 09:40:28 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix fsconfig_command redeclaration bug In-Reply-To: <8c42038a335a0122dee3365ce1940920@athaariq.my.id> References: <20221001020445.1458953-1-buildroot@athaariq.my.id> <20221001155615.GA30794@scaer> <84f6447a658a7c5c46852dc84fe5cb1a@athaariq.my.id> <8c42038a335a0122dee3365ce1940920@athaariq.my.id> Message-ID: <20221002074028.GB30794@scaer> Athaariq, Al, On 2022-10-02 03:33 +0000, buildroot at athaariq.my.id spake thusly: > >This issue is really weird, because the glibc commit we are using is > >supposed to contain the related fixes > Pardon me for being so weird. You are not being weird, no worries. > What I'm trying to fix is this error: > error: multiple definition of ?enum fsconfig_command? Yes, we are aware of that issue. > I did spent entire morning last two days ago and I figured out that no > matter how do I detect linux/mount.h presence in "sys/mount.h", **enum > fsconfig_command** still in clash between linux-headers and glibc. However, > the problem only exist in glibc v2.36 whereas no effect when I changed linux > version. Thus, linux-headers seems to be declared after glibc. When you change the linux headers version in Buildroot, you need to restart from a clean state, i.e. run "make clean" before resuming the build, see the full explanations in the manual: https://buildroot.org/downloads/manual/manual.html#full-rebuild > >How is this a buildroot-specific bug? Can you elaborate on that part? If > >it is really a buildroot-related bug, then we want to understand it, and > >fix it, not work around it. > > Because it successfully compiled in Gentoo but failed when compile Buildroot > for Raspberry Pi 4 and Raspberry Pi 3, with default configuration. The > reason why I asked "Is this possible on Buildroot?" is to give you two > options: > 1. If possible, let's make sure linux-headers installed before glibc > 2. If not, let's workaround for a while until there's a revelation from > upstream > > >This is exactly what we are doing already, and for as long as Buildroot > >has supported building a glibc-ased toolchain, as the kernel headers are > >required to build glibc; see package/glibc/glibc.mk at 28: > > Well that's interesting. Wonder why that enum redeclaration error exist and > my last patch actually works. Yes, we really need to understand why it is broken in the first place, to evaluate whether your patch is correct, or whether we should change the way we do things in Buildroot. Hint: I think we do something in Buildroot that is wrong (or has become wrong as time passed), but we could not pinpoint it yet... > >To be noted, and as Thomas noticed, OpenEmbeded is also using a glibc > >2.36 commit, and even one older than ours, but they do not seem to have > >issues. > > Honestly, I only tested it on my Raspberry Pi 4 and my friend's Raspberry Pi > 3 with latest origin/master and default configuration. Yesterday, I realized > that all raspberry boards are symlinked into one directory after checked > autobuild. Perhaps, board specific issue? If correct, I'm going to patch the > custom kernel instead, plus bump it. It is not specific to the raspberrypi, we have tons of builds failing on various architectures: http://autobuild.buildroot.net/?reason=glibc-2.36-% > I also noticed Raspberry Pi boards are marked ORPH at autobuild. Is that > means orphan? If yes, I would gladly contribute as board maintainer. Thank > you for your cooperation. Weird, as we already have two persons registered for the rpi series: $ ./utils/get-developers -f configs/raspberrypi* board/raspberrypi/ Julien Grossholtz Martin Bark But if you want to be added to that list, do not hesitate to send a patch against the DEVELOPERS file to add yourself. > NB: My nickname is Eric Erics are everywhere! :-) Is that what you want to be adressed by, or should we go with Athaariq? Regards, Yann E. MORIN. > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From guillaume.bressaix at gmail.com Sun Oct 2 08:26:51 2022 From: guillaume.bressaix at gmail.com (Guillaume W. Bres) Date: Sun, 2 Oct 2022 10:26:51 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/python-scipy: bump version to 1.9.1 Message-ID: <20221002082651.29673-1-guillaume.bressaix@gmail.com> scipy.tar.xz is no longer released. A new "python.h" missing header build time failure arised, it is fixed with a new -I cflag. New runtime/linking errors appeared on architectures that need libatomic, an -latomic linker flag solves them Signed-off-by: Guillaume W. Bres --- Scipy is expected to move to a meson build infrastructure by the next release Once 1.9.2 is out, we know we already have my V3-1.9.1 patch serie that builds "fine" with meson, it involved a minor tweak (hopefuly solved by this time). The test script no longer did pass though, this serie is not 100% ready to go --- package/python-scipy/python-scipy.hash | 2 +- package/python-scipy/python-scipy.mk | 13 +++++++++++-- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/package/python-scipy/python-scipy.hash b/package/python-scipy/python-scipy.hash index 0274679c43..1ba239aabf 100644 --- a/package/python-scipy/python-scipy.hash +++ b/package/python-scipy/python-scipy.hash @@ -1,5 +1,5 @@ # Locally generated -sha256 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 scipy-1.8.1.tar.xz +sha256 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 scipy-1.9.1.tar.gz sha256 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c LICENSE.txt sha256 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 scipy/linalg/src/lapack_deprecations/LICENSE sha256 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 scipy/ndimage/LICENSE.txt diff --git a/package/python-scipy/python-scipy.mk b/package/python-scipy/python-scipy.mk index a8c23c6c88..d45b14c4fa 100644 --- a/package/python-scipy/python-scipy.mk +++ b/package/python-scipy/python-scipy.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_SCIPY_VERSION = 1.8.1 -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz +PYTHON_SCIPY_VERSION = 1.9.1 +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz PYTHON_SCIPY_SITE = https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) PYTHON_SCIPY_LICENSE = \ BSD-3-Clause, \ @@ -36,14 +36,23 @@ PYTHON_SCIPY_INSTALL_STAGING = YES PYTHON_SCIPY_SETUP_TYPE = setuptools PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 +PYTHON_SCIPY_CFLAGS = \ + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ -L$(PYTHON3_PATH)/site-packages/numpy/core/lib # -lnpyrandom localization PYTHON_SCIPY_LDFLAGS += \ -L$(STAGING_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/numpy/random/lib +# scipy can use C++11 atomics when available, so we need to link with +# libatomic for the architectures that need libatomic. +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +PYTHON_SCIPY_LDFLAGS += -latomic +endif + PYTHON_SCIPY_ENV = \ F90=$(TARGET_FC) \ + CFLAGS="$(PYTHON_SCIPY_CFLAGS)" \ LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" # Provide system configuration options to numpy distutils extensions, telling -- 2.20.1 From guillaume.bressaix at gmail.com Sun Oct 2 08:37:55 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 2 Oct 2022 10:37:55 +0200 Subject: [Buildroot] [RESEND v1 1/1] package/python-scipy: bump version to 1.9.1 In-Reply-To: <20221001181938.GO30794@scaer> References: <20220928193437.13407-1-guillaume.bressaix@gmail.com> <20221001181938.GO30794@scaer> Message-ID: Thank you Yann for the needed feedback. I see most of my submissions as drafts that need one. For instance, I hesitate a lot about what should remain in the commit log or not. Same thing applies to the -latomic flag, which I knew solved my use case, but I could not find a package to find similar requirements. Your input is always valued, thank you Guillaume W. Bres Software engineer Le sam. 1 oct. 2022 ? 20:19, Yann E. MORIN a ?crit : > Guillaume, All, > > On 2022-09-28 21:34 +0200, Guillaume W. Bres spake thusly: > > Signed-off-by: Guillaume W. Bres > > --- > > All that is below the triple-dash line will be dropped by git when we > apply the patch. However, you provided interesting information in that > post-commit-log message... > > > Scipy is expected to move to a meson build infrastructure > > by the next release > > > > scipy-.tar.xz is no longer released. > > This should be part of the commit log proper, to explain why you > switched to the .tar.gz archive. > > > For some reason, a new "Python.h" missing header > > build time failure arised. I solve it with a -Ipython include. > > This should also be part of the commit log > > > Then test script failed, with linker/runtime missing symbols error, > > all related to the linear algebra portion (which we do test). > > Errors like "undefined reference to __atomic_compare_exchange 8" > > regarding > > "site-/scipy/optimize/_highs/_ > highs_wrapper.cpython-310-arm-linux-gnueabi.so" > > to be specific. I solved it with a -latomic flag. > > I see you pass it via CFLAGS; that's not correct, it should be passed > via LDFLAGS. If that doesnt work, it should be explained why. > > Also, we can't arbitrary link agains -latomic, because not all > toolchains have it. See cairo.mk for how it should be conditionally > used. > > Regards, > Yann E. MORIN. > > > Once 1.9.2 is out, we know we already have my V3-1.9.1 patch > > serie that builds "fine" with meson, it involved a minor tweak > > (hopefuly solved by this time). The test script no longer did pass > though, > > this serie is not 100% ready to go > > --- > > package/python-scipy/python-scipy.hash | 2 +- > > package/python-scipy/python-scipy.mk | 7 +++++-- > > 2 files changed, 6 insertions(+), 3 deletions(-) > > > > diff --git a/package/python-scipy/python-scipy.hash > b/package/python-scipy/python-scipy.hash > > index 0274679c43..1ba239aabf 100644 > > --- a/package/python-scipy/python-scipy.hash > > +++ b/package/python-scipy/python-scipy.hash > > @@ -1,5 +1,5 @@ > > # Locally generated > > -sha256 > 0140dd24d14ce194fdb3df496c2190f0896ca84ac98bf5d69c3b3fb7bde1a1e9 > scipy-1.8.1.tar.xz > > +sha256 > 26d28c468900e6d5fdb37d2812ab46db0ccd22c63baa095057871faa3a498bc9 > scipy-1.9.1.tar.gz > > sha256 > 96599f8ec69a2cc609265eed13fc75090aacb28742260e55ce623788a33da19c > LICENSE.txt > > sha256 > 37e64a498894ac7c3b070023e3689e954a8ecf8a23b90968d09a455f1b4f7b35 > scipy/linalg/src/lapack_deprecations/LICENSE > > sha256 > 606209a000716c5f66e33e180ce08434b96ed17db4975ab9723c6b5fbcc89609 > scipy/ndimage/LICENSE.txt > > diff --git a/package/python-scipy/python-scipy.mk > b/package/python-scipy/python-scipy.mk > > index a8c23c6c88..1619b9f40a 100644 > > --- a/package/python-scipy/python-scipy.mk > > +++ b/package/python-scipy/python-scipy.mk > > @@ -4,8 +4,8 @@ > > # > > > ################################################################################ > > > > -PYTHON_SCIPY_VERSION = 1.8.1 > > -PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.xz > > +PYTHON_SCIPY_VERSION = 1.9.1 > > +PYTHON_SCIPY_SOURCE = scipy-$(PYTHON_SCIPY_VERSION).tar.gz > > PYTHON_SCIPY_SITE = > https://github.com/scipy/scipy/releases/download/v$(PYTHON_SCIPY_VERSION) > > PYTHON_SCIPY_LICENSE = \ > > BSD-3-Clause, \ > > @@ -36,6 +36,8 @@ PYTHON_SCIPY_INSTALL_STAGING = YES > > PYTHON_SCIPY_SETUP_TYPE = setuptools > > PYTHON_SCIPY_BUILD_OPTS = config_fc --fcompiler=gnu95 > > > > +PYTHON_SCIPY_CFLAGS = \ > > + -I$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR) > > PYTHON_SCIPY_LDFLAGS = $(TARGET_LDFLAGS) -shared \ > > -L$(PYTHON3_PATH)/site-packages/numpy/core/lib > > # -lnpyrandom localization > > @@ -44,6 +46,7 @@ PYTHON_SCIPY_LDFLAGS += \ > > > > PYTHON_SCIPY_ENV = \ > > F90=$(TARGET_FC) \ > > + CFLAGS="$(PYTHON_SCIPY_CFLAGS) -latomic" \ > > LDFLAGS="$(PYTHON_SCIPY_LDFLAGS)" > > > > # Provide system configuration options to numpy distutils extensions, > telling > > -- > > 2.20.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' > conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ > | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is > no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v > conspiracy. | > > '------------------------------^-------^------------------^--------------------' > -------------- next part -------------- An HTML attachment was scrubbed... URL: From yann.morin.1998 at free.fr Sun Oct 2 09:59:04 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 11:59:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> <20221001165241.GM30794@scaer> Message-ID: <20221002095904.GA2517@scaer> Fabrice, All, On 2022-10-01 23:06 +0200, Fabrice Fontaine spake thusly: > Hi, > Le?sam. 1 oct. 2022 ??18:52, Yann E. MORIN < [1]yann.morin.1998 at free.fr> a ?crit?: > > Fabrice, All, > > On 2022-09-28 23:36 +0200, Fabrice Fontaine spake thusly: > > Denial of service attack and buffer overflow against TLS 1.3 > > servers using session ticket resumption. When built with > > --enable-session-ticket and making use of TLS 1.3 server code in > > wolfSSL, there is the possibility of a malicious client to craft a > > malformed second ClientHello packet that causes the server to crash. > > This issue is limited to when using both --enable-session-ticket and TLS > > 1.3 on the server side. Users with TLS 1.3 servers, and having > > --enable-session-ticket, should update to the latest version of wolfSSL. > > I see that we are not explicitly using either --enable or > --disable-session-ticket, so what is the default, and were we impacted? > > session-ticket is disabled by default. > Moreover, session-ticket is enabled if nginx, wpas, haproxy or lighty is enabled (but all of them are disabled). I am not sure I grokked that sentence. > So, we were not impacted except if the user has explicitly enabled this option in its own tree. OK. > Also, we should have an explicit setting for that, rather than leave it > to chance. > > Why not, but wolfssl has a ton of options, should we also explicitly set them to false even if they are disabled by default? Indeed, I just saw how many iot has, so we can't decently have all of them explicitly stated. I was ;ostly wondering if adding an explicit --disable-session-ticket to then add a _IGNORE_CVES, which could be backported, rather than backporting the version bump, to the stable branches. But since they all already have 5.5.0, even the LTS, backporting the version bump is better than adding an explicit --disable. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 2 10:06:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 2 Oct 2022 12:06:18 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221001213928.6B43A86743@busybox.osuosl.org> References: <20221001213928.6B43A86743@busybox.osuosl.org> Message-ID: <20221002120618.70631fe4@windsurf> On Sat, 1 Oct 2022 23:35:46 +0200 Yann E. MORIN wrote: > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ License list should be comma-separated, not space-separated. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From peter at korsgaard.com Sun Oct 2 11:30:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 13:30:37 +0200 Subject: [Buildroot] [git commit branch/2022.05.x] Update for 2022.05.3 Message-ID: <20221002113101.A241C86754@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4dc1fffca00d07462f59d195a8a8b73b1a885110 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.05.x Signed-off-by: Peter Korsgaard --- CHANGES | 50 ++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 53 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 7b2cb2a2c6..c68224bb37 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,53 @@ +2022.05.3, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, containerd, + cups, dhcpcd, directfb, docker-cli, docker-engine, connman, + edk2, edk2-platform, elf2flt, expat, ffmpeg, ficl, freeswitch, + gcc, gdb, git, glibc, gnutls, go, gocryptfs, graphicsmagick, + grub2, gst1-plugins-bad, gst1-plugins-good, heirloom-mailx, + icu, igh-ethercat, imagemagick, imx-gpu-viv, jack2, jose, + jpeg, jquery-ui-themes, kodi, kvm-unit-tests, libcamera, + libconfuse, libfreeimage, libglvnd, libgpg-error, libinput, + libmdbx, libp11, libsepol, libtirpc, libupnp, libvirt, + libvncserver, libwpe, libxml2, libzlib, linux, linux-tools, + lshw, m4, makedevs, mali-driver, mariadb, memcached, mesa3d, + minidlna, mosquitto, mutt, mv-ddr-marvell, ncurses, ne10, + netsniff-ng, networkd-dispatcher, ocrad, ola, opencv4, + openocd, openssh, openvmtools, pango, pcsc-lite, pistache, + polkit, postgis, postgresql, python-crossbar, + python-paho-mqtt, python-pygame, python-service-identity, + python-txdbus, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, redis, + rng-tools, rsync, rsyslog, rtl8189es, rtl8723bu, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, + syslog-ng, tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, + uacme, uboot-tools, uclibc, unzip, usbguard, v4l2loopback, + vim, waffle, webkitgtk, weston, wolfssl, wpewebkit, xfsprogs, + xserver_xorg-server, xtables-addons, zziplib + + Issues resolved: + + #14556: python-crossbar fails to build + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.05.2, released August 31st, 2022 Important / security related fixes. diff --git a/Makefile b/Makefile index 14edc46865..0c2e7d7d77 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.05.2 +export BR2_VERSION := 2022.05.3 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1661958000 +BR2_VERSION_EPOCH = 1664710000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index 7d68392a8d..f3d4866d33 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.05.2' +RELEASE='2022.05.3' ### Change here for more memory/cores ### VM_MEMORY=2048 From yann.morin.1998 at free.fr Sun Oct 2 11:35:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 13:35:59 +0200 Subject: [Buildroot] [git commit] package/volk: license list is comma-separated Message-ID: <20221002113701.4B6648677D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Reported-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 5e2e50ae73..af5bd4306b 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ +VOLK_LICENSE = GPL-3.0+, LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From wbx at openadk.org Sun Oct 2 11:59:59 2022 From: wbx at openadk.org (Waldemar Brodkorb) Date: Sun, 2 Oct 2022 13:59:59 +0200 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git Message-ID: Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB -- 2.30.2 From yann.morin.1998 at free.fr Sun Oct 2 12:11:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 2 Oct 2022 14:11:21 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221002120618.70631fe4@windsurf> References: <20221001213928.6B43A86743@busybox.osuosl.org> <20221002120618.70631fe4@windsurf> Message-ID: <20221002121121.GB2517@scaer> Thomas, All, On 2022-10-02 12:06 +0200, Thomas Petazzoni via buildroot spake thusly: > On Sat, 1 Oct 2022 23:35:46 +0200 > Yann E. MORIN wrote: > > +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ > License list should be comma-separated, not space-separated. Woops, fixed. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From angelo at amarulasolutions.com Sun Oct 2 13:12:35 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 2 Oct 2022 15:12:35 +0200 Subject: [Buildroot] [PATCH] linux: update cip/cip-rt kernels to latest versions Message-ID: <20221002131235.529951-1-angelo@amarulasolutions.com> Signed-off-by: Angelo Compagnucci --- linux/Config.in | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index de9bf0ad7a..30e117a6af 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -32,7 +32,7 @@ config BR2_LINUX_KERNEL_LATEST_VERSION select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION - bool "Latest CIP SLTS version (5.10.115-cip7)" + bool "Latest CIP SLTS version (5.10.145-cip17)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help CIP launched in the spring of 2016 to address the needs of @@ -52,7 +52,7 @@ config BR2_LINUX_KERNEL_LATEST_CIP_VERSION https://www.cip-project.org config BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION - bool "Latest CIP RT SLTS version (5.10.109-cip5-rt4)" + bool "Latest CIP RT SLTS version (5.10.145-cip17-rt7)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help Same as the CIP version, but this is the PREEMPT_RT realtime @@ -129,8 +129,8 @@ endif config BR2_LINUX_KERNEL_VERSION string default "5.17.15" if BR2_LINUX_KERNEL_LATEST_VERSION - default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION - default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION + default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION + default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ if BR2_LINUX_KERNEL_CUSTOM_VERSION default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL -- 2.34.1 From peter at korsgaard.com Sun Oct 2 14:10:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 02 Oct 2022 16:10:22 +0200 Subject: [Buildroot] Buildroot 2022.05.3 released Message-ID: <87lepy2u5t.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.05.3 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.05.3.tar.gz or http://buildroot.org/downloads/buildroot-2022.05.3.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.05.3 is a bugfix release, fixing a number of important / security related issues discovered since the 2022.05.2 release. - Fixed compatibility issue with make 4.3 and the 'printvars' / 'show-vars' commands. - Dependencies: Ensure 'find' and 'xargs' are available on the build host. - Security fixes for busybox, clamav, docker-engine, expat, git, gnutls, go, heirloom-mailx, imagemagick, libconfuse, libtirpc, libwpe, libxml2, libzlib, mariadb, minidlna, mosquitto, networkd-dispatcher, postgresql, python3, redis, rsync, sqlite, squid, tcpreplay, tinyproxy, unzip, v4l2loopback, vim, webkitgtk, wolfssl, wpewebkit, - Fixes for download/compilation/runtime/license issues in ace, arm-trusted-firmware, babeltrace, boost, botan, busybox, cog, connman, containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, edk2, edk2-platforms, elf2flt, ffmpeg, ficl, freeswitch, gcc, gdb, glibc, gocryptfs, graphicsmagick, grub2, gst1-plugins-bad, gst1-plugins-good, icu, igh-ethercat, imx-gpu-viv, jack2, jose, jpeg, jquery-ui-themes, kodi, libcamera, libfreeimage, libglvnd, libgpg-error, libinput, libmdbx, libp11, libsepol, libupnp, libvirt, libvncserver, linux, lshw, m4, makedevs, makedumpfile, mali-driver, mariadb, memcached, mesa3d, mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, ocrad, opencv4, openocd, openssh, pango, pcsc-lite, pistache, polkit, postgis, python-crossbar, python-paho-mqtt, python-pygame, qemu, qlibc, qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, rsyslog, rtl8189es, rtl8723bu, runc, rustc, sconeserver, sdl2, snort, sox, stress-ng, strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, syslog-ng, tcf-agent, tesseract-ocr, uacme, uboot-tools, usbguard, waffle, xfsprogs, xserver_xorg-server, xtables-addons, zziplib For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.05.3 Users of the affected packages are strongly encouraged to upgrade. Notice that the 2022.05.x series is now END OF LIFE. Please migrate to the 2022.08.x series instead which will be supported until December 2022. Many thanks to all the people contributing to this release: git shortlog -sn 2022.05.2.. 61 Fabrice Fontaine 29 Ricardo Martincoski 23 Giulio Benetti 16 Thomas Petazzoni 13 Yann E. MORIN 11 Christian Stewart 8 Francois Perrad 7 Romain Naour 6 Peter Korsgaard 5 Adrian Perez de Castro 5 Lang Daniel 4 Bernd Kuhls 4 Luca Ceresoli 4 Marcus Hoffmann 3 James Hilliard 3 Julien Olivain 3 Quentin Schulz 2 Alexandru Ardelean 2 Arnout Vandecappelle 2 Baruch Siach 2 Nicola Di Lieto 1 Alistair Francis 1 Andreas Ziegler 1 Arnout Vandecappelle (Essensium/Mind) 1 Atsushi Nemoto 1 Bram Vlerick 1 Emile Cormier 1 Florian Fainelli 1 Grzegorz Blach 1 Gwenhael Goavec-Merou 1 Joachim Wiberg 1 Joel Stanley 1 John Keeping 1 Konstantin Menyaev 1 Markus Mayer 1 Maxim Kochetkov 1 Michael Klein 1 Michael Nosthoff 1 Niklas Cassel 1 Peter Seiderer 1 Roosen Henri 1 Stefan Agner 1 Thomas Devoogdt 1 Titouan Christophe 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From bernd.kuhls at t-online.de Sun Oct 2 14:15:41 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 02 Oct 2022 16:15:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix build with BR2_OPTIMIZE_S References: <20220927031702.2918414-1-james.hilliard1__18922.8034157836$1664248650$gmane$org@gmail.com> Message-ID: Am Mon, 26 Sep 2022 21:17:02 -0600 schrieb James Hilliard: > Add patch from glibc patchwork to fix bug #29576. > > Details: > https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > - > http://autobuild.buildroot.net/results/ 5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > > Signed-off-by: James Hilliard > Tested-by: Bernd Kuhls [build-tested using this defconfig: BR2_x86_64=y BR2_TOOLCHAIN_BUILDROOT_CXX=y] From bernd.kuhls at t-online.de Sun Oct 2 14:33:53 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:33:53 +0200 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash Message-ID: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:33:54 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:33:54 +0200 Subject: [Buildroot] [PATCH 2/2] package/hdparm: bump version to 9.65 In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <20221002143354.1909295-2-bernd.kuhls@t-online.de> Release notes: https://sourceforge.net/p/hdparm/news/ Signed-off-by: Bernd Kuhls --- package/hdparm/hdparm.hash | 4 ++-- package/hdparm/hdparm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index b86afc7cfe..1d73585232 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ -sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz +sha1 3bc0916493f2f485c6371ec0fd16418d0e1fa636 hdparm-9.65.tar.gz # Locally computed -sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz +sha256 d14929f910d060932e717e9382425d47c2e7144235a53713d55a94f7de535a4b hdparm-9.65.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT diff --git a/package/hdparm/hdparm.mk b/package/hdparm/hdparm.mk index 2c3b372deb..3c8b77e5eb 100644 --- a/package/hdparm/hdparm.mk +++ b/package/hdparm/hdparm.mk @@ -4,7 +4,7 @@ # ################################################################################ -HDPARM_VERSION = 9.63 +HDPARM_VERSION = 9.65 HDPARM_SITE = https://downloads.sourceforge.net/project/hdparm/hdparm HDPARM_LICENSE = BSD-Style HDPARM_LICENSE_FILES = LICENSE.TXT -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:46:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:46:29 +0200 Subject: [Buildroot] [PATCH 2/2] package/kodi: fix build with fmt >= 9.x In-Reply-To: <20221002144629.2105385-1-bernd.kuhls@t-online.de> References: <20221002144629.2105385-1-bernd.kuhls@t-online.de> Message-ID: <20221002144629.2105385-2-bernd.kuhls@t-online.de> For details see https://github.com/xbmc/xbmc/pull/21674 Build-tested using this previously broken defconfig: BR2_x86_64=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_PACKAGE_KODI=y BR2_PACKAGE_MESA3D=y BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_IRIS=y BR2_PACKAGE_MESA3D_OPENGL_EGL=y BR2_PACKAGE_MESA3D_OPENGL_ES=y BR2_PACKAGE_PYTHON3=y BR2_PACKAGE_PYTHON3_PY_ONLY=y Signed-off-by: Bernd Kuhls --- ...char-as-formatting-of-non-void-point.patch | 54 +++++++++++++++++++ ...t-as-char-as-formatting-of-non-void-.patch | 33 ++++++++++++ 2 files changed, 87 insertions(+) create mode 100644 package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch create mode 100644 package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch diff --git a/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch b/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch new file mode 100644 index 0000000000..af68de220c --- /dev/null +++ b/package/kodi/0005-GLUtils-cast-as-char-as-formatting-of-non-void-point.patch @@ -0,0 +1,54 @@ +From 44b30c116682968bacf8aec566fc9c193026ecc9 Mon Sep 17 00:00:00 2001 +From: Rudi Heitbaum +Date: Wed, 6 Jul 2022 22:48:35 +1000 +Subject: [PATCH] GLUtils: cast as char as formatting of non-void pointers + is disallowed + +Downloaded from upstream commit: +https://github.com/xbmc/xbmc/commit/44b30c116682968bacf8aec566fc9c193026ecc9 + +Signed-off-by: Bernd Kuhls +--- + xbmc/utils/GLUtils.cpp | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +diff --git a/xbmc/utils/GLUtils.cpp b/xbmc/utils/GLUtils.cpp +index 1ef804709f..c36dcf6a20 100644 +--- a/xbmc/utils/GLUtils.cpp ++++ b/xbmc/utils/GLUtils.cpp +@@ -148,27 +148,27 @@ void _VerifyGLState(const char* szfile, const char* szfunction, int lineno) + void LogGraphicsInfo() + { + #if defined(HAS_GL) || defined(HAS_GLES) +- const GLubyte *s; ++ const char* s; + +- s = glGetString(GL_VENDOR); ++ s = reinterpret_cast(glGetString(GL_VENDOR)); + if (s) + CLog::Log(LOGINFO, "GL_VENDOR = %s", s); + else + CLog::Log(LOGINFO, "GL_VENDOR = NULL"); + +- s = glGetString(GL_RENDERER); ++ s = reinterpret_cast(glGetString(GL_RENDERER)); + if (s) + CLog::Log(LOGINFO, "GL_RENDERER = %s", s); + else + CLog::Log(LOGINFO, "GL_RENDERER = NULL"); + +- s = glGetString(GL_VERSION); ++ s = reinterpret_cast(glGetString(GL_VERSION)); + if (s) + CLog::Log(LOGINFO, "GL_VERSION = %s", s); + else + CLog::Log(LOGINFO, "GL_VERSION = NULL"); + +- s = glGetString(GL_SHADING_LANGUAGE_VERSION); ++ s = reinterpret_cast(glGetString(GL_SHADING_LANGUAGE_VERSION)); + if (s) + CLog::Log(LOGINFO, "GL_SHADING_LANGUAGE_VERSION = %s", s); + else +-- +2.30.2 + diff --git a/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch b/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch new file mode 100644 index 0000000000..41dc3356bd --- /dev/null +++ b/package/kodi/0006-WinSystemX11-cast-as-char-as-formatting-of-non-void-.patch @@ -0,0 +1,33 @@ +From 651c82853fe69dc5aa3e6a50f2eb2f752caafba0 Mon Sep 17 00:00:00 2001 +From: Rudi Heitbaum +Date: Mon, 11 Jul 2022 09:39:02 +0000 +Subject: [PATCH] WinSystemX11: cast as char as formatting of non-void + pointers is disallowed + +Downloaded from upstream commit: +https://github.com/xbmc/xbmc/commit/651c82853fe69dc5aa3e6a50f2eb2f752caafba0 + +Signed-off-by: Bernd Kuhls +--- + xbmc/windowing/X11/WinSystemX11.cpp | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/xbmc/windowing/X11/WinSystemX11.cpp b/xbmc/windowing/X11/WinSystemX11.cpp +index 8a18288fd8..033c0f77bf 100644 +--- a/xbmc/windowing/X11/WinSystemX11.cpp ++++ b/xbmc/windowing/X11/WinSystemX11.cpp +@@ -1038,7 +1038,10 @@ bool CWinSystemX11::HasWindowManager() + + if(status == Success && items_read) + { +- CLog::Log(LOGDEBUG,"Window Manager Name: %s", data); ++ const char* s; ++ ++ s = reinterpret_cast(data); ++ CLog::Log(LOGDEBUG, "Window Manager Name: {}", s); + } + else + CLog::Log(LOGDEBUG,"Window Manager Name: "); +-- +2.30.2 + -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 2 14:46:28 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 16:46:28 +0200 Subject: [Buildroot] [PATCH 1/2] package/kodi: add comment to display udev dependency for gbm when wayland/x11 are disabled Message-ID: <20221002144629.2105385-1-bernd.kuhls@t-online.de> Without this additional comment only the comment kodi needs an OpenGL EGL backend with OpenGL or GLES support is displayed which is not enough to guide users. Signed-off-by: Bernd Kuhls --- package/kodi/Config.in | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/kodi/Config.in b/package/kodi/Config.in index 90710683db..7bd8bc2943 100644 --- a/package/kodi/Config.in +++ b/package/kodi/Config.in @@ -27,6 +27,9 @@ config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_GBM depends on BR2_PACKAGE_HAS_UDEV # libinput select BR2_PACKAGE_KODI_PLATFORM_SUPPORTS +comment "kodi needs udev support for gbm" + depends on !BR2_PACKAGE_KODI_PLATFORM_SUPPORTS + config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_WAYLAND bool default y -- 2.30.2 From robimarko at gmail.com Sun Oct 2 15:04:43 2022 From: robimarko at gmail.com (Robert Marko) Date: Sun, 2 Oct 2022 17:04:43 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package Message-ID: <20221002150443.159058-1-robimarko@gmail.com> mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko --- Changes in v2: * Correct license * Add host-pkgconf to DEPENDENCIES * Add minimal required kernel config options --- package/Config.in | 1 + package/mdio-tools/Config.in | 9 +++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ 4 files changed, 33 insertions(+) create mode 100644 package/mdio-tools/Config.in create mode 100644 package/mdio-tools/mdio-tools.hash create mode 100644 package/mdio-tools/mdio-tools.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ed41e8bdd4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -536,6 +536,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..feb1e825ac --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,9 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..308a23824b --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) -- 2.37.3 From Alexey.Brodkin at synopsys.com Sun Oct 2 15:24:16 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Sun, 2 Oct 2022 15:24:16 +0000 Subject: [Buildroot] [arc-buildroot] [autobuild.buildroot.net] Your daily results for 2022-09-30 In-Reply-To: <3jt0wnw0cp-1@m0098571.ppops.net> References: <3jt0wnw0cp-1@m0098571.ppops.net> Message-ID: Hi Thomas, all, > Gitlab CI failures > ================== > > Below is a list of Gitlab CI job failures in relation to defconfigs or > runtime tests you are in charge of. Please help us improving the quality > of Buildroot by investigating those build failures and sending patches > to fix them. > > Results for 'master' > -------------------- > > Build failures related to your defconfigs: > > defconfig | link to the job > ----------------------------------+-------------------------------------------------------------- > snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3101769991 > That happens because upstream glibc doesn't have support of ARCompact architecture, i.e. ARC700 processors are not supported even though changes compared to ARCv2 which is well supported in upstream are really quite subtle, see [1] for example. We haven't seen this problem much earlier since we started from glibc fork used for ARC targets and in our fork we used to have ARCompact patches. But later we got rid of ARC fork of glibc and moved to purely upstream version, see [2] and that's when ARC700 problem became possible. Still we've started work on getting the same thing ported to Buildroot, see [3] but put it on pause for a while. I guess it's the right time to finalize that activity finally as there're still ARC700 hardware in the wild so let's make our precious users a bit happier ;) -Alexey [1] https://github.com/openwrt/openwrt/blob/openwrt-21.02/toolchain/glibc/patches/300-arc.patch [2] https://git.buildroot.net/buildroot/commit/?id=40258a3f395fd4c285e7ded27b25edd71f5c33b4 [3] https://github.com/foss-for-synopsys-dwc-arc-processors/buildroot/pull/30/commits/c0b51289470ae089f19956288a0dbd1fb5a76c83 From veredz72 at gmail.com Sun Oct 2 15:33:02 2022 From: veredz72 at gmail.com (Zvi Vered) Date: Sun, 2 Oct 2022 18:33:02 +0300 Subject: [Buildroot] buildroot 2022.02.1: apache (httpd) - libgcc_s.so.1 must be installed for pthread_cancel to work In-Reply-To: <87mtaobvm1.fsf@dell.be.48ers.dk> References: <87v8pebk2s.fsf@dell.be.48ers.dk> <87r101as98.fsf@dell.be.48ers.dk> <87mtaobvm1.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, Today I managed to build rootfs + kernel with a gcc created by buildroot. This time I used: i686 (x32) httpd worked fine. In /lib I noticed there are 2 libgcc files: libgcc_s.so.1 (95962 bytes) libgcc_s.so (132 bytes) Both files are real (not static link) In the external gcc I used before (created with crosstool-ng few years ago) there was only one libgcc_s file. The other one was a static link. Do you think this difference is the cause to the problem I had ? Thank you, Zvika On Sat, Sep 24, 2022 at 7:11 PM Peter Korsgaard wrote: > >>>>> "Zvi" == Zvi Vered writes: > > > Hi Peter, > > There is no real technical reason. > > I thought it would be right to use gcc I got from the vendor (Xilinx) > > Also, buildroot supports using external toolchain. > > All gcc libs are copied (by buildroot) to /lib64. > > Should I try using gcc built by buildroot ? > > Yes please, if nothing else then to verify that the issue is specific to > your toolchain. We do not have access to that petalinux toolchain, so it is > hard to help debugging. > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bernd.kuhls at t-online.de Sun Oct 2 15:51:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 2 Oct 2022 17:51:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.0 Message-ID: <20221002155129.3199774-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...ion-to-disable-optional-neon-suppor.patch} | 0 ...-Include-stddef.h-to-fix-build-erro.patch} | 0 ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ .../0007-include-drop-c11-compat-h.patch | 100 -------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..bf72937a66 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.0 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..449fc58818 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html +sha256 b1f9c8fd08f2cae3adf83355bef4d2398e8025f44947332880f2d0066bdafa8c mesa-22.2.0.tar.xz +sha512 13a21b9ed6b0a5dfd0293b73df271a929c3155d83e8beb3d958fe18d79277f3611bf5b26a1186d446f4e1479a36bb13d0a13d6ac68937989fe7a0d917e12171e mesa-22.2.0.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 9fc9935614..5e473bbeea 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.0 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From peter at korsgaard.com Sun Oct 2 14:18:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 16:18:53 +0200 Subject: [Buildroot] [git commit] Update for 2022.05.3 Message-ID: <20221002164535.72F0586795@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=446c584c96613d0d0cd32ed20858b191d96310d9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master (cherry picked from commit 4dc1fffca00d07462f59d195a8a8b73b1a885110) [Peter: drop Makefile/Vagrantfile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/CHANGES b/CHANGES index 03c859ceb6..3fc00b44d7 100644 --- a/CHANGES +++ b/CHANGES @@ -134,6 +134,57 @@ #14881: Watchdogd Package missing INSTALL_STAGING #14876: arm-trusted-firmware can no longer be compiled with fPIE +2022.05.3, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, containerd, + cups, dhcpcd, directfb, docker-cli, docker-engine, connman, + edk2, edk2-platform, elf2flt, expat, ffmpeg, ficl, freeswitch, + gcc, gdb, git, glibc, gnutls, go, gocryptfs, graphicsmagick, + grub2, gst1-plugins-bad, gst1-plugins-good, heirloom-mailx, + icu, igh-ethercat, imagemagick, imx-gpu-viv, jack2, jose, + jpeg, jquery-ui-themes, kodi, kvm-unit-tests, libcamera, + libconfuse, libfreeimage, libglvnd, libgpg-error, libinput, + libmdbx, libp11, libsepol, libtirpc, libupnp, libvirt, + libvncserver, libwpe, libxml2, libzlib, linux, linux-tools, + lshw, m4, makedevs, mali-driver, mariadb, memcached, mesa3d, + minidlna, mosquitto, mutt, mv-ddr-marvell, ncurses, ne10, + netsniff-ng, networkd-dispatcher, ocrad, ola, opencv4, + openocd, openssh, openvmtools, pango, pcsc-lite, pistache, + polkit, postgis, postgresql, python-crossbar, + python-paho-mqtt, python-pygame, python-service-identity, + python-txdbus, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, redis, + rng-tools, rsync, rsyslog, rtl8189es, rtl8723bu, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, sysdig, syslinux, + syslog-ng, tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, + uacme, uboot-tools, uclibc, unzip, usbguard, v4l2loopback, + vim, waffle, webkitgtk, weston, wolfssl, wpewebkit, xfsprogs, + xserver_xorg-server, xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14556: python-crossbar fails to build + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.05.2, released August 31st, 2022 Important / security related fixes. From peter at korsgaard.com Sun Oct 2 16:45:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 18:45:02 +0200 Subject: [Buildroot] [git commit] docs/website/news.html: add 2022.05.3 announcement Message-ID: <20221002164535.7E16C86796@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c57ee9d7cf81c1c1530e4ff00348d22fdbc473d4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/news.html | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/docs/website/news.html b/docs/website/news.html index 385bdad64b..634462ffcd 100644 --- a/docs/website/news.html +++ b/docs/website/news.html @@ -9,6 +9,28 @@

    News

      +
    • +
      +
      +
      +

      2022.05.3 released

      +

      2 October 2022

      +
      +
      +

      The 2022.05.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2022.05.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2022.05.3 release.

      + +

      Notice that the 2022.05.x series is now end of life. Please migrate to + the 2022.08 series instead which will be supported until December 2022.

      +
      +
      +
      • +
    • From peter at korsgaard.com Sun Oct 2 19:37:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 21:37:02 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] Update for 2022.02.6 Message-ID: <20221002193739.64875867A0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=374f83630bafe7371ecd751cf07e3e7c0ce1c71e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Peter Korsgaard --- CHANGES | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 51 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 4d7076e908..055b262d7a 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,51 @@ +2022.02.6, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, connman, + containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, + edk2, edk2-platforms, elf2flt, expat, ffmpeg, ficl, + freeswitch, freetype, gcc, gdb, git, gnutls, go, + graphicsmagic, grub2, gst1-plugins-bad, gst1-plugins-good, + heirloom-mailx, icu, igh-ethercat, imagemagick, imx-gpu-viv, + jose, jpeg, jquery-ui-themes, kodi, libconfuse, libfreeimage, + libglvnd, libgpg-error, libinput, libmdbx, libsepol, libtirpc, + libupnp, libvirt, libvncserver, libwpe, libxml2, libzlib, + linux, linux-tools, lshw, m4, makedevs, makedumpfile, + mali-driver, mariadb, memcached, mesa3d, minidlna, mosquitto, + mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, + networkd-dispatcher, ocrad, opencv4, openocd, openssh, pango, + pcsc-lite, polkit, postgis, postgresql, python-paho-mqtt, + python-pygame, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, + rsync, rsyslog, rtl8189es, rtl8723be, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, + tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, uacme, + uboot-tools, uclibc, unzip, usbguard, v4l2loopback, vim, + webkitgtk, wolfssl, wpewebkit, xfsprogs, xserver_xorg-server, + xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.02.5, released August 31st, 2022 Important / security related fixes. diff --git a/Makefile b/Makefile index 51de2066d7..93125e16a6 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.02.5 +export BR2_VERSION := 2022.02.6 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1661977000 +BR2_VERSION_EPOCH = 1664739000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index cf6192a9d6..8ff587100c 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.02.5' +RELEASE='2022.02.6' ### Change here for more memory/cores ### VM_MEMORY=2048 From giulio.benetti at benettiengineering.com Sun Oct 2 20:45:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Sun, 2 Oct 2022 22:45:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt5webkit: fix qt-webkit-kisok In-Reply-To: <20220615065406.2856780-1-ankit.panchal@einfochips.com> References: <20220615065406.2856780-1-ankit.panchal@einfochips.com> Message-ID: Hi Ankit, sorry for the late reply, On 15/06/22 08:54, Ankit Panchal wrote: > From: Ankit Panchal > > While compilation of qt-webkit-kiosk package we get following error: > ERROR: Unknown module(s) in QT: webkit webkitwidgets > > more detail about the bug is provided at: > https://bugs.buildroot.org/show_bug.cgi?id=14606 > > Following are the changes done: > 1. The installation paths of the qt5webkit modules in the .pri files > has been modified. > 2. And softlinks of the webkit and webkitwidgets packages has been > created at the expected paths. > > Signed-off-by: Ankit Panchal > --- > package/qt5/qt5webkit/qt5webkit.mk | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/package/qt5/qt5webkit/qt5webkit.mk b/package/qt5/qt5webkit/qt5webkit.mk > index 6912359674..a850a03ca9 100644 > --- a/package/qt5/qt5webkit/qt5webkit.mk > +++ b/package/qt5/qt5webkit/qt5webkit.mk > @@ -50,6 +50,23 @@ ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y) > QT5WEBKIT_CONF_OPTS += -DENABLE_SAMPLING_PROFILER=OFF > endif > > +define QT5WEBKIT_CONF_PRI > + $(SED) 's/QT.webkit.includes =.*/QT.webkit.includes = \$$\$$QT_MODULE_INCLUDE_BASE \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit/g' -e 's/QT.webkit.libs =.*/QT.webkit.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit.rpath =.*/QT.webkit.rpath = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit.bins =.*/QT.webkit.bins = \$$\$$QT_MODULE_BIN_BASE/g' -e 's/QMAKE_RPATHDIR +=.*/QMAKE_RPATHDIR += \$$\$$QT_MODULE_LIB_BASE/g' $(@D)/Source/WebKit/qt_lib_webkit.pri > + > + $(SED) 's/QT.webkit_private.includes =.*/QT.webkit_private.includes = \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit\/5.212.0 \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKit\/5.212.0\/QtWebKit/g' -e 's/QT.webkit_private.libs =.*/QT.webkit_private.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkit_private.bins =.*/QT.webkit_private.bins = \$$\$$QT_MODULE_BIN_BASE/g' $(@D)/Source/WebKit/qt_lib_webkit_private.pri > + > + $(SED) 's/QT.webkitwidgets.includes =.*/QT.webkitwidgets.includes = \$$\$$QT_MODULE_INCLUDE_BASE \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets/g' -e 's/QT.webkitwidgets.libs =.*/QT.webkitwidgets.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets.rpath =.*/QT.webkitwidgets.rpath = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets.bins =.*/QT.webkitwidgets.bins = \$$\$$QT_MODULE_BIN_BASE/g' -e 's/QMAKE_RPATHDIR +=.*/QMAKE_RPATHDIR += \$$\$$QT_MODULE_LIB_BASE/g' $(@D)/Source/WebKit/qt_lib_webkitwidgets.pri > + > + $(SED) 's/QT.webkitwidgets_private.includes =.*/QT.webkitwidgets_private.includes = \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets\/5.212.0 \$$\$$QT_MODULE_INCLUDE_BASE\/QtWebKitWidgets\/5.212.0\/QtWebKitWidgets/g' -e 's/QT.webkitwidgets_private.libs =.*/QT.webkitwidgets_private.libs = \$$\$$QT_MODULE_LIB_BASE/g' -e 's/QT.webkitwidgets_private.bins =.*/QT.webkitwidgets_private.bins = \$$\$$QT_MODULE_BIN_BASE/g' $(@D)/Source/WebKit/qt_lib_webkitwidgets_private.pri > +endef Generally we prefer having a local patch instead of SED tweaks since they are difficult to understand. I've become only 1 week ago qt5 package maintainer so I haven't seen your patch, but I've seen this patch: https://patchwork.ozlabs.org/project/buildroot/patch/20220929181350.1026033-1-thomas.ballasi at savoirfairelinux.com/ that I've reviewed. Feel free to check it and comment it since you've faced the same problem. All future patches are welcome. Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > +QT5WEBKIT_POST_CONFIGURE_HOOKS += QT5WEBKIT_CONF_PRI > + > +define QT5WEBKIT_CREATE_SYMLINK > + ln -sf $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/mkspecs/modules/*.pri $(HOST_DIR)/mkspecs/modules/ > + ln -sf $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/include/QtWebKit* $(HOST_DIR)/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/ > +endef > +QT5WEBKIT_POST_INSTALL_STAGING_HOOKS += QT5WEBKIT_CREATE_SYMLINK > + > QT5WEBKIT_CONF_OPTS += \ > -DENABLE_TOOLS=OFF \ > -DPORT=Qt \ From peter at korsgaard.com Sun Oct 2 21:01:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 02 Oct 2022 23:01:37 +0200 Subject: [Buildroot] Buildroot 2022.02.6 released Message-ID: <87fsg62b4e.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.02.6 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.02.6.tar.gz or http://buildroot.org/downloads/buildroot-2022.02.6.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.02.6 is a bugfix release on the current long term release, fixing a number of important / security related issues discovered since the 2022.02.5 release. - Fixed compatibility issue with make 4.3 and the 'printvars' / 'show-vars' commands. - Dependencies: Ensure 'find' and 'xargs' are available on the build host. - Security fixes for busybox, clamav, containerd, docker-engine, expat, freetype, git, gnutls, go, heirloom-mailx, imagemagick, libconfuse, libtirpc, libwpe, libxml2, libzlib, mariadb, minidlna, mosquitto, networkd-dispatcher, postgresql, python3, redis, rsync, sqlite, squid, tcpreplay, tinyproxy, unzip, v4l2loopback, vim, webkitgtk, wolfssl, wpewebkit - Fixes for download/compilation/runtime/license issues in ace, arm-trusted-firmware, babeltrace2, boost, botan, busybox, cog, connman, cups, dhcpcd, directfb, docker-cli, docker-engine, edk2, edk2-platforms, elf2flt, ffmpeg, ficl, freeswitch, gcc, gdb, grub2, gst1-plugins-bad, gst1-plugins-good, icu, igh-ethercat, jack2, jose, jpeg, jquery-ui-themes, kodi, libfreeimage, libglvnd, libgpg-error, libinput, libmdbx, libsepol, libupnp, libvirt, libvncserver, linux, linux-tools, lshw, makedevs, makedumpfile, mali-driver, mariadb, memcached, mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, ocrad, opencv4, openocd, openssh, pango, pcsc-lite, polkit, postgis, python-paho-mqtt, python-pygame, qemu, qlibc, qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, rsyslog, rtl8189es, rtl8723bu, runc, rustc, sconeserver, sdl2, snort, sox, stress-ng, strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, tcf-agent, tesseract-ocr, uacme, uboot-tools, usbguard, xfsprogs, xserver_xorg-server, xtables-addons, zziplib For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.02.6 Users of the affected packages are strongly encouraged to upgrade. Many thanks to all the people contributing to this release: git shortlog -sn 2022.02.5.. 54 Fabrice Fontaine 29 Ricardo Martincoski 23 Giulio Benetti 14 Thomas Petazzoni 12 Yann E. MORIN 11 Francois Perrad 7 Peter Korsgaard 6 Christian Stewart 6 Romain Naour 5 Adrian Perez de Castro 5 Bernd Kuhls 5 Lang Daniel 4 Luca Ceresoli 4 Marcus Hoffmann 4 Quentin Schulz 3 James Hilliard 2 Alexandru Ardelean 2 Baruch Siach 2 Julien Olivain 2 Nicola Di Lieto 1 Alistair Francis 1 Andreas Ziegler 1 Arnout Vandecappelle 1 Arnout Vandecappelle (Essensium/Mind) 1 Atsushi Nemoto 1 Bram Vlerick 1 Florian Fainelli 1 Grzegorz Blach 1 Gwenhael Goavec-Merou 1 Joachim Wiberg 1 John Keeping 1 Konstantin Menyaev 1 Markus Mayer 1 Maxim Kochetkov 1 Michael Klein 1 Michael Nosthoff 1 Niklas Cassel 1 Peter Seiderer 1 Roosen Henri 1 Stefan Agner 1 Thomas Devoogdt 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 2 21:05:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:05:31 +0200 Subject: [Buildroot] [git commit] docs/website: update for 2022.02.6 Message-ID: <20221002210552.C281986794@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2572faace9cf6b2081777068f085d577af350b3d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/download.html | 18 +++++++++--------- docs/website/news.html | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+), 9 deletions(-) diff --git a/docs/website/download.html b/docs/website/download.html index 0ecd4b02f1..b28c3a54d7 100644 --- a/docs/website/download.html +++ b/docs/website/download.html @@ -8,37 +8,37 @@
      Download
      -

      Latest long term support release: 2022.02.5

      +

      Latest long term support release: 2022.02.6

      - +
      - +
      -

      buildroot-2022.02.5.tar.gz

      -

      PGP signature

      +

      buildroot-2022.02.6.tar.gz

      +

      PGP signature

      - +
      - +
      -

      buildroot-2022.02.5.tar.xz

      -

      PGP signature

      +

      buildroot-2022.02.6.tar.xz

      +

      PGP signature

      diff --git a/docs/website/news.html b/docs/website/news.html index 634462ffcd..07ca3c0ac1 100644 --- a/docs/website/news.html +++ b/docs/website/news.html @@ -9,6 +9,25 @@

      News

        +
      • +
        +
        +
        +

        2022.02.6 released

        +

        2 October 2022

        +
        +
        +

        The 2022.02.6 bugfix release is out, fixing a number of important / + security related issues discovered since the 2022.02.5 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2022.02.6 release.

        +
        +
        +
        • +
      • From peter at korsgaard.com Sun Oct 2 21:03:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:03:38 +0200 Subject: [Buildroot] [git commit] Update for 2022.02.6 Message-ID: <20221002210552.B6BAE867B7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=12c7b23b4a383fc26f671dad7e1a39310e143a09 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard (cherry picked from commit 374f83630bafe7371ecd751cf07e3e7c0ce1c71e) [Peter: drop Makefile/Vagrantfile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/CHANGES b/CHANGES index 3fc00b44d7..357375c2de 100644 --- a/CHANGES +++ b/CHANGES @@ -345,6 +345,54 @@ #14731: BR2_PACKAGE_IOSTAT #14751: LVM2 Outdated Link +2022.02.6, released October 2nd, 2022 + + Important / security related fixes. + + Fixed compatibility issue with make 4.3 and the 'printvars' / + 'show-vars' commands. + + Dependencies: Ensure 'find' and 'xargs' are available on the + build host. + + A large number of typo fixes. + + Defconfigs: Galileo: Fix defconfig syntax, Licheepi zero: Fix + U-Boot dependencies, Bananapi m1, Olimx a20 olinuxino lime + 1+2, a33 olinuxino: Use standard FPU configuration, Pine 64 + sopine, Rockpro 64: Change to mainline ATF to fix build issue. + + Updated/fixed packages: ace, arm-trusted-firmware, + babeltrace2, boost, botan, busybox, clamav, cog, connman, + containerd, cups, dhcpcd, directfb, docker-cli, docker-engine, + edk2, edk2-platforms, elf2flt, expat, ffmpeg, ficl, + freeswitch, freetype, gcc, gdb, git, gnutls, go, + graphicsmagic, grub2, gst1-plugins-bad, gst1-plugins-good, + heirloom-mailx, icu, igh-ethercat, imagemagick, imx-gpu-viv, + jose, jpeg, jquery-ui-themes, kodi, libconfuse, libfreeimage, + libglvnd, libgpg-error, libinput, libmdbx, libsepol, libtirpc, + libupnp, libvirt, libvncserver, libwpe, libxml2, libzlib, + linux, linux-tools, lshw, m4, makedevs, makedumpfile, + mali-driver, mariadb, memcached, mesa3d, minidlna, mosquitto, + mutt, mv-ddr-marvell, ncurses, ne10, netsniff-ng, + networkd-dispatcher, ocrad, opencv4, openocd, openssh, pango, + pcsc-lite, polkit, postgis, postgresql, python-paho-mqtt, + python-pygame, python3, qemu, qlibc, + qoriq-cadence-dp-firmware, qt5xmlpatterns, ranger, rng-tools, + rsync, rsyslog, rtl8189es, rtl8723be, runc, rustc, + sconeserver, sdl2, snort, sox, sqlite, squid, stress-ng, + strongswan, sunxi-mali-utgard-driver, syslinux, syslog-ng, + tcf-agent, tcpreplay, tesseract-ocr, tinyproxy, uacme, + uboot-tools, uclibc, unzip, usbguard, v4l2loopback, vim, + webkitgtk, wolfssl, wpewebkit, xfsprogs, xserver_xorg-server, + xtables-addons, zziplib + + Issues resolved: + + #13216: [Documentation] 2020.02.6 requires GNU find utils + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14951: boost compile error when running make silently + 2022.02.5, released August 31st, 2022 Important / security related fixes. From fontaine.fabrice at gmail.com Sun Oct 2 21:19:10 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 2 Oct 2022 23:19:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 Message-ID: <20221002211910.9526-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine --- ...vars-outside-of-for-loop-for-std-c90.patch | 39 ------------------- package/darkhttpd/darkhttpd.hash | 4 +- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) delete mode 100644 package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c -- 2.35.1 From peter at korsgaard.com Sun Oct 2 21:21:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 2 Oct 2022 23:21:57 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] Update for 2022.08.1 Message-ID: <20221002212350.8CE65867CF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=25d865996d1d9753fe7d4dfe39cf18c7e9f91224 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: Peter Korsgaard --- CHANGES | 18 ++++++++++++++++++ Makefile | 4 ++-- support/misc/Vagrantfile | 2 +- 3 files changed, 21 insertions(+), 3 deletions(-) diff --git a/CHANGES b/CHANGES index 03c859ceb6..11b33a1351 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,21 @@ +2022.08.1, released October 2nd, 2022 + + Important / security related fixes. + + Updated/fixed packages: botan, busybox, docker-cli, + docker-engine, expat, git, haproxy, heirloom-mailx, icu, + imx-gpu-viv, libconfuse, libmdbx, libupnp, libxml2, + ltp-testsuite, m4, makedevs, mariadb, mesa3d, meson, + mosquitto, ncurses, openssh, pango, python3, qlibc, + qt5xmlpatterns, rtl8189es, rtl8723bu, rt8723ds, + rtl8812au-aircrack-ng, runc, sox, tinyproxy, uacme, unbound, + unzip, vim, xtables-addons + + Issues resolved (http://bugs.uclibc.org): + + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14921: wpewebkit build fails because of internal build order + 2022.08, released September 10th, 2022 Fixes all over the tree. diff --git a/Makefile b/Makefile index 03488dc6ba..36896684b1 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2022.08 +export BR2_VERSION := 2022.08.1 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1662822000 +BR2_VERSION_EPOCH = 1664745600 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index fb0f48215c..f558e52ca6 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.08' +RELEASE='2022.08.1' ### Change here for more memory/cores ### VM_MEMORY=2048 From thomas.petazzoni at bootlin.com Mon Oct 3 06:30:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 03 Oct 2022 06:30:32 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-02 Message-ID: <20221003063040.5BA9060ACE@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-02 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 9 | 0 | 0 | 9 | 2022.05.x | 20 | 32 | 0 | 52 | 2022.08.x | 24 | 35 | 0 | 59 | master | 87 | 165 | 0 | 252 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 13 igd2-for-linux-2.1 | 10 sysvinit-2.99 | 9 host-f2fs-tools-1.15.0 | 8 unknown | 8 systemd-250.4 | 7 btrfs-progs-5.16.2 | 6 host-sentry-cli-1.59.0 | 6 autofs-5.1.8 | 5 gensio-2.5.5 | 5 glibc-2.36-44-g2628500f5dff... | 5 libarchive-3.6.1 | 5 host-binutils-2.38 | 4 host-go-1.19.1 | 4 package/acpica/acpica.mk:40... | 3 bcg729-1.1.1 | 2 dash-0.5.11.5 | 2 dropbear-2022.82 | 2 gerbera-1.10.0 | 2 google-breakpad-c85eb4a59b6... | 2 host-gcc-final-11.3.0 | 2 linux-5.10.115-cip7 | 2 linux-5.17.15 | 2 procps-ng-3.3.17 | 2 qemu-7.1.0 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 android-tools-4.2.2+git2013... | 1 attr-2.5.1 | 1 bitcoin-0.21.2 | 1 bpftool-v7.0.0 | 1 dahdi-linux-5c840cf43838e06... | 1 dust-0.8.1 | 1 exempi-2.6.1 | 1 frr-8.3.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /nvme... | 1 gobject-introspection-1.72.0 | 1 gsl-2.6 | 1 host-gcc-initial-11.3.0 | 1 host-heimdal-7.7.0 | 1 ipmitool-1_8_19 | 1 jack2-1.9.20 | 1 libev-4.33 | 1 libfreeimage-3.18.0 | 1 libgcrypt-1.10.1 | 1 libiec61850-1.5.1 | 1 libnss-3.83 | 1 libtorrent-rasterbar-1.2.15 | 1 linux-serial-test-bf865c37c... | 1 lxc-4.0.12 | 1 make: *** wait: No child pr... | 1 makedumpfile-1.7.0 | 1 memcached-1.6.16 | 1 openpgm-5-3-128 | 1 perl-5.34.1 | 1 pv-1.6.20 | 1 python-cryptography-38.0.1 | 1 quickjs-2021-03-27 | 1 rtl8821au-4235b0ec7d7220a63... | 1 scrypt-1.3.1 | 1 tealdeer-1.5.0 | 1 toolchain-external-codescap... | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 wine-7.0 | 1 wolfssl-5.5.1 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- armeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ab448b5fe409a1d0f2a34eed5da62db9d15fd206 | arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/3f3c83606626aa203b4ae2e0c98c8d5642a935c9 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/ac45d2cb39bdfc1bcd44d4820c2b7de63bac1746 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/6ff930ac19feadee0cf77d59db819fad1eaa5f5f | mips64el | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/9872f517d3daf4f13316b3fab2725573ee8530a0 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f498e6c240ce537be3a9d526fce082a55e062f00 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ccb02b379b29f02d3c67a16400f556b7ba68c5db | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a0d73420bfeee70d69653d7c16b741805c579782 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/997b1da7197e9f970e06567f792b76d305e06759 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7db8df6fb57d10651666da75029a49a60d2e72f3 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/59be6fcfc905dd2c6e5c7e64f3a21c5291c0aab8 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/386e29ec8b8acc39009754a037c6a5213f06ae02 | aarch64_be | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/2f91cc1298febc95609050e700c4953452bc22c0 | sparc64 | bpftool-v7.0.0 | NOK | http://autobuild.buildroot.net/results/88748000512b3077001ae1698b4f88f3be3ddb7e | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2ba7f6f95072be244d57f354f9af53b6612a26bd | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b41c7e00226646516b06ac1454b699b40bb59087 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cd2ca71d4b7e28496c0122a538fcfd5165bddff3 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4a0b34fff94fc58d67da2f76609fb71046f06d33 | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9f892b73dfe85e5b7661ec7fac720b658932de62 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6f42a1332507a8bbcc2d7c0fe814d16254b0845f | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6fcd61df6d512fc39b90bf54a4077f62aa94f630 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9df86edda7315382e749757f37ce53ebad4a8227 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bd754b403755a15b2a2e5b07466b0eb2beb68861 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/51931bd2b39d07252384e6271b58e7e42429ecf3 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2d6bf664888fc029ac1a3e9449725dd3caebf83f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/de99056431235cb58fb8a741042ab3a2918cb1aa | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/82632db4aa585bf0747988fb87ed02cd173cf4be | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6dfbedb2c721cda58eb6a4ec75691ce2fbeecf73 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7ff1c240ba144e35cbe58f7237436546b90e78f2 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0766295fc3b3023741ebe21b01f6e958c8d2baad | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6b71a73292ca39723f567a3d21bdad5b7d50d8de | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3c3a8277a0048167a2520bca470643c6213ca4b5 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0d7e48a061179a2f7cd2442ffba5b2daf968286a | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/842379007e98513751a8a0c2fd30ccfa6246c8e8 | armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/62c01bf20a8ca34bda65f2a6ed319d00ccb0f4d7 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/eae6a45cc196db2bd7ba09d0b75c97a6029319fa | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/7533693a78d1938c25acaf5abffcbf79c24b8605 | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/29c47f34fe831c7c7c7ef09f09c0966cde33d0da | mips | dust-0.8.1 | NOK | http://autobuild.buildroot.net/results/f91583601fd27b22fe5dc53aa826b0da1e213693 | ORPH i686 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/792eeb49e1de86d32d5e13a0af386ffb47c38eca | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/f0a769dbe0611bf8f87d6e4f7c610b305997e1bb | s390x | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/f5fede8f0559780ced1d502695698b0df19dd0da | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/231ca11e195a667638cd5f8fe980263c5b747c69 | or1k | fs/ubifs/ubifs.mk:49: /nvme... | NOK | http://autobuild.buildroot.net/results/d7865a53c02e94b11abecb59d60f3abbf1d0ae8b | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4b5f5e13e0709f2659e81884f7179eb6efd0ab5e | nios2 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/c1872e2120a638a404e0af9b42d7a855b19cee9c | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/f0cb0b88d09d4f8f295b40169c8b46c4d8f0f287 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/13ad70c016ff43ca2a94a539d24e70ef2aaa0fd2 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ce3b6bf5b6de25ceedd0d5cbd2bbb992ce489a66 | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/4f41b2e38141b789bd1e8377b30bd01cd4db9dc7 | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/75770d4bebfc63fd98b4f2aa9dc98b07f0cb5cc8 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4b6914d3a107ffb84ca9f856a1a6c8f47bc2bdd | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9766c50d6c7eb1ee5bff2852da706190bc9357c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f62b0b97f83c1142544ead76f63a64ada6fd3857 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/759b5c8d6cb935fe115d2d9cc2636f4a62a814e3 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d13587d3b1b22a04e7885c42cb33c333ff2a8dc2 | x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/57c2fc3b7d743bbcc55bd2c0fbd8a499b6518a59 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/ab4421d8608cd1f10ff0b50093a035368458b7bc | mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/08b9b9008752a0d444a39a3b54eca11162eb0758 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/5bf057b972cd788d62240b0b21b37ed7139b46f3 | ORPH arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/50a30a88d863828d987c3d7b21b93e45d5fe4a42 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/afbc19d9142325b66eaf5e46f37c1dfe6c428fec | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/364a0bc6c78fa1800b426ca255aa73761707f02e | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2494b927de3962d7b006b01d205a5acd3e09a178 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d78671ccb5ae189041303ab1a98cd0390ed3bd48 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f20ea8e51afd1134a02e01de1e681f57a89b7340 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fb7842c70d086c242928e61b32c9ae51c3d3132e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d857da25f8346966ea07eddff35d2219788c7fd8 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f814fc830d57b7e550fa943ec718e0469e41646 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68c3a1f83ec5e9984842147d5c54713a7cea4a4c | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b245354ce7f9d256c1d3beaeaf88aac84d2cbaf9 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb3638f8c395efa68c7c094021b634bbddbeec97 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/68b31989ddfd08b3ff21cf8febc3cbb0e00a8ee2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/5e96cf7f06a387f0004ffa109801650412378b26 | sh4a | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/322c3f54a14fa50c1c42070832272de60f793546 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f5186eb2e696794d68692c24a9e2b634f8f60cc0 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f16a6fb764482813c4668ebfcb6f62ccbf6cede8 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/466edf5b9dad7bf2ebba686410b2f5a71854af3e | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/cebbe8539dd3fb2a756fc03eec12d2ee8cf268f1 | mips | host-heimdal-7.7.0 | NOK | http://autobuild.buildroot.net/results/15b62869df902343b016825e16507ee8cd07c596 | ORPH microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/02489165be43aad8765bcd19238795c37972fdd9 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9caea463b06d69c9270057851df1f0c35609bfb3 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7456cc6b2198cfda60858b7f3444aade01ab193b | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d1fc894fbe4b28a9f805346acbccff96964edf8f | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/709eefa34db11a6683fc5a1607ab8288fc67483b | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b6eec45a27fe94cd2db772aa51e59d56471f5ec | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7908ac4dba3264f08c665a1e30c62779f6bdbc52 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2d17a1e9c808b608deddf2159a53c0a5391a6d5 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b93f471eceda28851600ecef3e2860ed81d2ded | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4599acd1e3a96aa0a0ea7dc57024f5a3cb9ca9c2 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/024a0b4534d283287b28ec986740ad4ccda5b678 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c11533c3436fa018542856a58f87e8ebd89cd537 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0c5efe68021992e43b25dd59eea5ce1ff731cab1 | m68k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/44d118ce9fcc567e30bed23fc84a4447794974e7 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aa942d840c7ed168590a3c1f429f1327244ac72b | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/be9e0ed859ee30e198ad749aef7d502858d2b49a | armeb | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/9ca518073ccb9325288e7805c9394576573d96ba | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/f5eb6d64a7d2d7b473802a0e4eb4afc5de68abea | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/431ab63c495f0a7422b13a16636bfbd41bf7f81f | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/65bd177e0eea0fa81acbd37b7e63ebc2fc20f758 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e0f7dc5f06ec46979fc73e2918e39df8c1cb7ef2 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0b019f6147ec0cafe922e8e395554bbcaf24b343 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/90d21e8add96acaed3efca376d04e8b8f7caa86c | arm | libev-4.33 | NOK | http://autobuild.buildroot.net/results/0607ee8ebfb06d174701a8ba1457ca8a3daebfc9 | ORPH powerpc64 | libfreeimage-3.18.0 | NOK | http://autobuild.buildroot.net/results/790fbf2c1043449977670ba47226f943c34fd374 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/ba06d86309b8021847ec5870d29983fbc86d60b6 | ORPH or1k | libiec61850-1.5.1 | NOK | http://autobuild.buildroot.net/results/077176f30029abc2a5da7099134bfc70503924b2 | i686 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ea4c1fb38f244fceea8c4e543ec440f37219237c | mipsel | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/c55847a3545ac83197efc9d87eb0683943e3fba6 | m68k | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/439ffad1589c6f785fa7e95554dd2690b286d430 | ORPH powerpc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/3a4a4343bb3c3c038a352c48f6882d1eb1b73173 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/6a6763b748eb5866a68e474d3bd588699b983679 | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/431ac56152a9bd1b73074e3f9dd8d8575753e35b | ORPH riscv64 | linux-serial-test-bf865c37c... | NOK | http://autobuild.buildroot.net/results/f6ac2f094fb721739cf4c9da7bc87fad5afb6630 | sh4a | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/3e79e5b5e7d1c44fd28bd243f4c14b5e00e459f5 | powerpc | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/6a96fbf999656d5576592406af16b51a0abdec87 | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/0af2945b442217ccb46b34f0df9047202e9c8dcd | mips | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/52948c321953f2ea826046eecf208b8d37d797cc | ORPH xtensa | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/1058e9cf37aa019fd7120b2f1efe18028be06acd | aarch64_be | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/433a1ed7ec65a9a0121a0a68d8134359978d2119 | powerpc64le | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/39e25e01a8bfe266a31bace96b7c56aaeb3c546a | mips64el | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9d7dc3eb2a31a4e35de9d237de54293d4d04865e | arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/d7a6079930597da91a9744d9a26da79940e3ab13 | s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/8fff8cfdc27e8c7f522b7e6b68d66f3e6ac85acb | ORPH sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/4e180def0c6cd3ae71af856bd3fb49284f4e96ba | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/acd2235a2d95ec89e372e509bf7b5681e7d1b602 | ORPH mips | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/1a893dee40d3fd14e9bc4d929d23aa8b374ec6ff | riscv64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/11a4ec9fea61c839dba99a627c8350e6679caae1 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/335fd16cbee55256b2b5b5de364b7d4ae47ca67c | microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/773c4b844b88e68b2ca52b7fb3bb16bf6537c14d | sparc | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/69243c932c1f93dcae8b580cdf14e4485d2125ae | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/68f59b3bad2e999d0094348f04e1bc28fa7cee65 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a7818c37f2dc9dcdf5fa8384445b2e689462d62c | sh4eb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/dcfba576ea2bc3c677e3ab816782710808583793 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f06517c74681d4551525a6511a97487b6eb55b08 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16bedbe9a1e1a2e98b2e3c57b70343e6b74bad67 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ccd2dcc06c5abc33442cb1dbec668ac49e4eae5a | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e0e3f94119362e5db6aa468857252f538a478baa | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e80ee4fa4ba9d1e525e1f3dcf5a89cd94db2f249 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e79f0746b1f7e8aa209699fa34153d4f017cd91 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4975a54f853603a5e6f310769a32e69fbf3839ee | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/451237da0b3c64392bb8adeedc5deea442600581 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cda841fde1b0c21b04dd88b0d7771e1337990e20 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3bca48bdf4c3908b9ec46dbcb93c7121fb52a80c | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/96e8cd040b7cbe5a933bcc196857651d8db747ff | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4102cbd0673e86bcc0d670adfa3d6a8faa98608a | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fd7d5f3c2ef486d9114349881f1dad20ff33a8dc | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0ae8500ff315264b76d704d36db19a3f1b184251 | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/94bfb5d96e072b2a10943a1befef3265bd64856a | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/996b6f29c579bc1f830957d7492c46ed3abd9f65 | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/411f149d317e2e35a332f41aea5f5bc3d234e249 | mipsel | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/6e000d6706bce65c3dd4547857fffac788a7434f | or1k | unknown | NOK | http://autobuild.buildroot.net/results/dcd662e4c59365623ce8fb1096dfcb2a09891d5c | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/cd1997f44d98fda2768cd39b004af78163864692 | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/0cba89daa7e03da2731cc60ba92100e558d575ad | arc | unknown | NOK | http://autobuild.buildroot.net/results/e072064587ca80028a230146418b65dd29cebdcd | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/2f282888a8d75e9578f117346e616b9c21c1ede0 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/5b2d62fea1500c954716bff91af056c5219cbee1 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/ec0c17c0c5de78f47c2d34a33d13ba739cd05218 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/f2b8810682762e2731c2a3477a799811d9af49d2 | i586 | wine-7.0 | NOK | http://autobuild.buildroot.net/results/ed43a120e54a955855f23caf7a96b3d64d93e3ff | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/0ee18ce2106434dd44e91b802c15559fc3fae2e4 | sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/8bbe5bf479738a4c3d5b1f8ee7df9b07c9f35fa5 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/202ff3596f75ef383d8b747e568e5da1f6f12ae5 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/544c4d5530f1200d7f21ee61ee71ff8cc5144adb | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 4 igd2-for-linux-2.1 | 4 host-rust-1.60.0 | 2 uclibc-1.0.41 | 2 unknown | 2 boost-1.79.0 | 1 brltty-6.4 | 1 cairo-1.16.0 | 1 dash-0.5.11.5 | 1 erofs-utils-1.4 | 1 ffmpeg-4.4.2 | 1 gmp-6.2.1 | 1 host-elf2flt-2021.08 | 1 host-gcc-final-10.4.0 | 1 linux-5.10.115-cip7 | 1 linux-5.17.15 | 1 ltp-testsuite-20220121 | 1 lttng-tools-2.13.2 | 1 matio-1.5.22 | 1 mpg123-1.25.15 | 1 parted-3.4 | 1 pixman-0.40.0 | 1 xenomai | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | boost-1.79.0 | NOK | http://autobuild.buildroot.net/results/288c4c1b93ec52d56de8b31325949625622f2ce0 | powerpc64le | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/b990c47cdc34edd20b2bed9f7d16127b716a6345 | sparc | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/8b847586186adcf32f62a9c63d976a4a98b0894e | sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e5dddea1ccccf20dd21782bb146c52431635ca5c | ORPH or1k | erofs-utils-1.4 | NOK | http://autobuild.buildroot.net/results/e8ceefdbb390237ca77c25fc8bee147e5e063278 | sparc | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/26661f3fc7d3ebb33d074695ead2172b097cd3b3 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/2ea6d8af6ab16be9adad96c36adcf56e11826881 | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/34c8c4f76a44a1411b260f55573eb1e5150fd882 | ORPH arceb | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/340e621b65142a8ddfcde8b7cfc4abc9d24e1eec | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/27fd515bdfc2f9642cdd71a61c84852c69f470e9 | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/df5c928c37e9d75855d02c29ac7df787b602161e | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4ff8aa6d4e67f01a3c1038cb2145695aa3b0dff8 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/603bd7c18c29edacf988a9e107327c280a46ff7e | sparc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/6a14c311e72ffc29cf6dc7ee1c8a82a85a4d0b66 | powerpc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/9d6ca912527a27583e157c7f2afd4968d1c2a63b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fb6bee6a6e5e1c865679d426dec2638d736ba8d1 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f539600c9fac63d289e2e400537a378db2230205 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/faa505f2a2ca0962c88a10c3d018fffb213f3c72 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7c3f2f912a8fb415c882a48371ca1d0d2ffaa043 | m68k | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/9174e26737a0cd3944169b43952c99a1d252b795 | ORPH riscv32 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/0b961a149981c8d0cff7083dda1b95347ad6262d | ORPH mips64el | ltp-testsuite-20220121 | NOK | http://autobuild.buildroot.net/results/6107b8e5dbf2e43e18fc3395c96ddc4e2b1427ba | mips | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/41d73a68ec04e1863789b0abdf279ba46bb5203e | nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/3e3936af07e4bdef9d613428e11a9b149198782a | arm | mpg123-1.25.15 | NOK | http://autobuild.buildroot.net/results/d12fddd6fd90faebf109f543264a5677af3b6112 | ORPH arc | parted-3.4 | NOK | http://autobuild.buildroot.net/results/43306df17d4a9962856df6dcca0bf07799d3035e | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/d4e71e6b2dacfce08425d7b8fb03b37a5d92636e | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/5def99e7282ba04526095b8e80f2860688bfe49e | powerpc | uclibc-1.0.41 | NOK | http://autobuild.buildroot.net/results/e651d1d0aae691b0ce7d9a6db8a43429078a2e3d | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/fe0f9370c6b81c9038576136bdf449fdb975c070 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/b0011ec92b9c799e6ae02e5f06578bc22a10154f | xtensa | xenomai | NOK | http://autobuild.buildroot.net/results/eae4f87de968a522ba933e1370029c1692c136dc | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 5 igd2-for-linux-2.1 | 5 host-go-1.18.6 | 4 unknown | 2 containerd-1.6.6 | 1 coreutils-9.1 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 freeradius-server-3.2.0 | 1 frr-8.2.2 | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 jemalloc-5.3.0 | 1 libglib2-2.72.3 | 1 linux-5.10.109-cip5-rt4 | 1 linux-5.17.15 | 1 openvmtools-11.3.5-18557794 | 1 pixman-0.40.0 | 1 putty-0.76 | 1 quickjs-2021-03-27 | 1 valgrind-3.19.0 | 1 vdr-2.6.1 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/9053ed2009f894433d702b29f7b4b52f713bc1b3 | sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/c2b028da7dcc9597e4a7519c9b2be5c9f011fb3d | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/1f0159732d8365be13e0df6463e9e97a77bc8e4f | ORPH arm | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/faf4a108787fe5fb9fb8517c4dcb4e3f96630cb5 | x86_64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/45f9fe2ddbb4d0f579be03f89e74659ad61641f4 | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/abded48651f016a8d3d0645f9ea90ba25c934efc | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/ca636b87632b137ed368e05553cf887c8fabea0f | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/310986acc2098c2969db248317c356f0d9a3d6c0 | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/5cc27182096cec576bd86503d2c0299e4ae198b6 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/fe5f0e845ef84a43132da89000b21601aa3315cd | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8ff232ee137cb066759f29d4c60f3ce81efba637 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/10edbd65b9d5471dd216589fad2a256574865358 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/148c0cccbe9c403fafcbf928c9d98d82e08d8a73 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/fa8bc17de12be0b3e79bc0326bd8c343940f1f91 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/349592af893ee3e9e1bece6265bacbbfc6be521e | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/01b11e37a6d2094e2b840265f75e01ff1c919fef | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2cde563e9b7a90d480e2a3cbc1dadb3af1c82ea8 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/88cc0a2e105d0ebc28031b087f9c07bfba40758e | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5208049c80e3b6b3999ac34f4e9ebc54a45a0d2b | riscv32 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3b07d7e0fe59641a80914b986aa84d5bcbfe400b | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2a02226a45f923db76954e329518ea190d421b96 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ded4ff2fc255f93126853dca9ed51fb77fb3225f | m68k | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/9e509c0327ea928772fc078edfef9e65af213614 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a6fc65ee72e8acc2a674aca12a973895c7efe128 | armeb | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/62408d4dd73d4f6e52ed4cad3388150b1577829b | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/44c1e5bfcff4613164b0510ac8d47ad4854ce2e5 | ORPH i586 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/6d63698419e0678b78aee1f4948ea3793456dd23 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/0498ca732f57378503f241c9ed8a4583810ada5e | i686 | putty-0.76 | NOK | http://autobuild.buildroot.net/results/55cc4355e7392001a99cedc8dc7cbde983d66089 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/05836c2aa27c055bb864040f810fd662d41b8524 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/855d97759530a932bc4e2ce10bba309fab2e729b | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/ac6a9734afaf6d0e888bb5841bda090ee65ae6be | powerpc64le | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/93bdc4c430e57a40f809c5bcfe89671fd249d10e | ORPH arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/9a34738ce663e66c87fa291101d1d0c834b0f203 | mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/2a3cee056070726ea77256e914200b18fed62c66 | Gitlab CI results for 2022-10-02 ================================ Detail of defconfig failures for 2022.05.3 ------------------------------------------ defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451240 | Detail of runtime-test failures for 2022.05.3 --------------------------------------------- runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451705 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451706 | ORPH TestLuaLuaSec | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451383 | ORPH TestPythonPy3Crossbar | https://gitlab.com/buildroot.org/buildroot/-/jobs/3115451444 | ORPH Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r6 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.0 | assimp | DISTRO | https://release-monitoring.org/project/06988 | 5.2.1 | 5.2.5 | ORPH asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.31 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.1 | brltty | DISTRO | https://release-monitoring.org/project/00220 | 6.4 | 6.5 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 5.19.1 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | checksec | DISTRO | https://release-monitoring.org/project/17677 | 2.5.0 | 2.6.0 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.1 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-filters | DISTRO | https://release-monitoring.org/project/05541 | 1.28.15 | 1.28.16 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.5.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | darkhttpd | DISTRO | https://release-monitoring.org/project/00391 | 1.13 | 1.14 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.22 | 1.15.0 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efibootmgr | DISTRO | https://release-monitoring.org/project/00663 | 17 | 18 | efivar | DISTRO | https://release-monitoring.org/project/00664 | 37 | 38 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.0 | ell | DISTRO | https://release-monitoring.org/project/17781 | 0.49 | 0.53 | ORPH empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.19 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.28 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.5 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.15 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.5.8 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.33 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.13 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fail2ban | DISTRO | https://release-monitoring.org/project/06602 | 0.11.2 | 1.0.1 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.33 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fluidsynth | DISTRO | https://release-monitoring.org/project/10437 | 2.2.9 | 2.3.0 | fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeipmi | DISTRO | https://release-monitoring.org/project/00848 | 1.6.9 | 1.6.10 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 3.92.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gesftpserver | DISTRO | https://release-monitoring.org/project/59393 | 1 | 2 | ORPH gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.37.3 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gmrender-resurrect | DISTRO | https://release-monitoring.org/project/21445 | 0.0.9 | 0.1 | gnuplot | DISTRO | https://release-monitoring.org/project/01216 | 5.4.4 | 5.4.5 | gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gnutls | DISTRO | https://release-monitoring.org/project/01221 | 3.7.7 | 3.7.8 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.0.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grep | DISTRO | https://release-monitoring.org/project/01251 | 3.7 | 3.8 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.2.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hdparm | DISTRO | https://release-monitoring.org/project/01304 | 9.63 | 9.65 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH htpdate | DISTRO | https://release-monitoring.org/project/132187 | 1.3.5 | 1.3.6 | hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.362 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.37 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-49 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | isl | DISTRO | https://release-monitoring.org/project/13286 | 0.24 | 0.25 | ORPH iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | iwd | DISTRO | https://release-monitoring.org/project/18380 | 1.25 | 1.30 | ORPH jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.24.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.0.4 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.98.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi | DISTRO | https://release-monitoring.org/project/20547 | 19.4-Matrix | 20.0a3-Nexus | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.0-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-jsonschemabuilder | DISTRO | https://release-monitoring.org/project/05511 | 19.4-Matrix | 20.0a3-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.5.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-texturepacker | DISTRO | https://release-monitoring.org/project/05511 | 19.4-Matrix | 20.0a3-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.6 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdnet | DISTRO | https://release-monitoring.org/project/06308 | 1.14 | 1.16.1 | ORPH libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.3 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.14 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.1 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.0 | libmaxminddb | DISTRO | https://release-monitoring.org/project/07470 | 1.6.0 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.11 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.12 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.0 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.7.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20220913 | live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.1 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.1 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lrzip | DISTRO | https://release-monitoring.org/project/01842 | 0.641 | 0.651 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.5 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH memtest86 | DISTRO | https://release-monitoring.org/project/01966 | 5.01 | 5.31b | mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.44.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | micropython | DISTRO | https://release-monitoring.org/project/10539 | 1.19 | 1.19.1 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.0.2 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.185 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.4 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221001 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.10.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.15 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 515.76 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ocf-linux | DISTRO | https://release-monitoring.org/project/21541 | 20120127 | 20171122 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+17 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.30 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004003 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.78 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.27 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.09.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.0.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.0 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.18.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.84 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.84 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.1 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.0a2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.27 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown | DISTRO | https://release-monitoring.org/project/03916 | 3.3.4 | 3.4.1 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.0 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.13.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 2.8.7 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.3 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.2.2 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.3 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220609.1 | 20220814.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 2.5.3 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 24.0.1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.1 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.9 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.4.1 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 1.4.41 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | qt6base | DISTRO | https://release-monitoring.org/project/07927 | 6.3.2 | 6.4.0 | qt6serialport | DISTRO | https://release-monitoring.org/project/07927 | 6.3.2 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.0 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.6.0 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rt-tests | DISTRO | https://release-monitoring.org/project/59450 | 2.3 | 2.4 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.6.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.42.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.7 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.2 | 0.29.3 | syslog-ng | DISTRO | https://release-monitoring.org/project/04930 | 3.37.1 | 3.38.1 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.0 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.07 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.5.20 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0453 | 9.0.0636 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.40 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.230 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.18 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.11 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 3.7.2 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.7 | 2.38.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 373 | ORPH xz | DISTRO | https://release-monitoring.org/project/05277 | 5.2.5 | 5.2.7 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zfs | DISTRO | https://release-monitoring.org/project/11706 | 2.1.4 | 2.1.5 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.05.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2020-28017 | https://security-tracker.debian.org/tracker/CVE-2020-28017 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From peter at korsgaard.com Mon Oct 3 06:47:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 03 Oct 2022 08:47:33 +0200 Subject: [Buildroot] Buildroot 2022.08.1 released Message-ID: <87o7uttncq.fsf@dell.be.48ers.dk> Hi, Buildroot is a simple tool for creating complete embedded Linux systems (http://buildroot.org). Buildroot 2022.08.1 is released - Go download it at: http://buildroot.org/downloads/buildroot-2022.08.1.tar.gz or http://buildroot.org/downloads/buildroot-2022.08.1.tar.xz Or get it from Git: git://git.buildroot.org/buildroot Buildroot 2022.08.1 is a bugfix release, fixing a number of important / security related issues discovered since the 2022.08 release. - Security fixes for busybox, docker-engine, expat, git, heirloom-mailx, libconfuse, libxml2, mariadb, python3, tinyproxy, unbound, unzip, vim - Fixes for download/compilation/runtime/license issues in botan, docker-cli, haproxy, icu, imx-gpu-viv, libmdbx, libupnp, ltp-testsuite, m4, makedevs, mesa3d, meson, mosquitto, ncurses, openssh, pango, qlibc, qt5xmlpatterns, rtl8189es, rtl8723bu, rtl8723ds, rtl8812au-aircrack-ng, runc, sox, uacme, xtables-addons For more details, see the CHANGES file: https://git.buildroot.net/buildroot/plain/CHANGES?id=2022.08.1 Users of the affected packages are strongly encouraged to upgrade. Many thanks to all the people contributing to this release: git shortlog -sn 2022.08.. 11 Fabrice Fontaine 11 Giulio Benetti 5 Yann E. MORIN 4 James Hilliard 4 Lang Daniel 4 Luca Ceresoli 4 Peter Korsgaard 4 Thomas Petazzoni 3 Christian Stewart 3 Francois Perrad 2 Nicola Di Lieto 2 Quentin Schulz 1 Baruch Siach 1 Joachim Wiberg 1 Joel Stanley 1 Kyle Harding 1 Michael Klein 1 Peter Seiderer 1 Petr Vorel 1 ?????? ????? (Leonid Yuriev) -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 3 06:49:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 3 Oct 2022 08:49:17 +0200 Subject: [Buildroot] [git commit] Update for 2022.08.1 Message-ID: <20221003065325.59A258680D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1648c2ec369b00c3beae353a1053961fe7d0e42d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard (cherry picked from commit 25d865996d1d9753fe7d4dfe39cf18c7e9f91224) [Peter: drop Makefile changes] Signed-off-by: Peter Korsgaard --- CHANGES | 18 ++++++++++++++++++ support/misc/Vagrantfile | 2 +- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/CHANGES b/CHANGES index 357375c2de..ef58d17d89 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,21 @@ +2022.08.1, released October 2nd, 2022 + + Important / security related fixes. + + Updated/fixed packages: botan, busybox, docker-cli, + docker-engine, expat, git, haproxy, heirloom-mailx, icu, + imx-gpu-viv, libconfuse, libmdbx, libupnp, libxml2, + ltp-testsuite, m4, makedevs, mariadb, mesa3d, meson, + mosquitto, ncurses, openssh, pango, python3, qlibc, + qt5xmlpatterns, rtl8189es, rtl8723bu, rt8723ds, + rtl8812au-aircrack-ng, runc, sox, tinyproxy, uacme, unbound, + unzip, vim, xtables-addons + + Issues resolved (http://bugs.uclibc.org): + + #14796: 64 bit time and seccomp conflict (OpenSSH server crash) + #14921: wpewebkit build fails because of internal build order + 2022.08, released September 10th, 2022 Fixes all over the tree. diff --git a/support/misc/Vagrantfile b/support/misc/Vagrantfile index fb0f48215c..f558e52ca6 100644 --- a/support/misc/Vagrantfile +++ b/support/misc/Vagrantfile @@ -5,7 +5,7 @@ ################################################################################ # Buildroot version to use -RELEASE='2022.08' +RELEASE='2022.08.1' ### Change here for more memory/cores ### VM_MEMORY=2048 From peter at korsgaard.com Mon Oct 3 06:52:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 3 Oct 2022 08:52:43 +0200 Subject: [Buildroot] [git commit] docs/website: update for 2022.08.1 Message-ID: <20221003065325.653F1867B5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=84b29a39416012e316da70dc0ad18b5887521422 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- docs/website/download.html | 18 +++++++++--------- docs/website/news.html | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+), 9 deletions(-) diff --git a/docs/website/download.html b/docs/website/download.html index b28c3a54d7..d1eeaba5ee 100644 --- a/docs/website/download.html +++ b/docs/website/download.html @@ -42,37 +42,37 @@
      -

      Latest stable release: 2022.08

      +

      Latest stable release: 2022.08.1

      - +
      - +
      -

      buildroot-2022.08.tar.gz

      -

      PGP signature

      +

      buildroot-2022.08.1.tar.gz

      +

      PGP signature

      - +
      - +
      -

      buildroot-2022.08.tar.xz

      -

      PGP signature

      +

      buildroot-2022.08.1.tar.xz

      +

      PGP signature

      https://bugs.busybox.net/attachment.cgi?id=9371&action=edit patch to fix this issue/bug For development, install to staging as well! -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Wed Oct 5 15:50:46 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Wed, 05 Oct 2022 15:50:46 +0000 Subject: [Buildroot] [Bug 15026] package/udisks: install to staging In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15026 Yann E. MORIN changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED CC| |yann.morin.1998 at free.fr Status|NEW |RESOLVED --- Comment #1 from Yann E. MORIN --- Hello, Thanks for your patch. As explained in the manual [0], we do not take patches from the bug tracker; instead can you submit it to the mailing list, please? [0] https://buildroot.org/downloads/manual/manual.html#submitting-patches Regards, Yann E. MORIN. -- You are receiving this mail because: You are on the CC list for the bug. From fontaine.fabrice at gmail.com Wed Oct 5 20:06:21 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 5 Oct 2022 22:06:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/liburiparser: bump to version 0.9.7 Message-ID: <20221005200621.229757-1-fontaine.fabrice@gmail.com> https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog Signed-off-by: Fabrice Fontaine --- package/liburiparser/liburiparser.hash | 2 +- package/liburiparser/liburiparser.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/liburiparser/liburiparser.hash b/package/liburiparser/liburiparser.hash index 8b40807541..73b4ec6867 100644 --- a/package/liburiparser/liburiparser.hash +++ b/package/liburiparser/liburiparser.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a288a06668528c19e85e38c508335938e1de6fdd4b8f2072401b4533fcebf644 uriparser-0.9.6.tar.xz +sha256 1ddae35cb3cc2c36e8199829d46f1c7f8b222e74a723fdae67ec8561e1ac5a39 uriparser-0.9.7.tar.xz sha256 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3 COPYING diff --git a/package/liburiparser/liburiparser.mk b/package/liburiparser/liburiparser.mk index c9903bd74f..6d25b1d9bb 100644 --- a/package/liburiparser/liburiparser.mk +++ b/package/liburiparser/liburiparser.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBURIPARSER_VERSION = 0.9.6 +LIBURIPARSER_VERSION = 0.9.7 LIBURIPARSER_SOURCE = uriparser-$(LIBURIPARSER_VERSION).tar.xz LIBURIPARSER_SITE = https://github.com/uriparser/uriparser/releases/download/uriparser-$(LIBURIPARSER_VERSION) LIBURIPARSER_LICENSE = BSD-3-Clause -- 2.35.1 From aduskett at gmail.com Wed Oct 5 21:21:47 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:47 -0700 Subject: [Buildroot] [PATCH 1/4] package/mender: bump version to 3.4.0 Message-ID: <20221005212150.1384370-1-aduskett@gmail.com> Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a year change. Signed-off-by: Adam Duskett --- package/mender/mender.hash | 6 +++--- package/mender/mender.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/mender/mender.hash b/package/mender/mender.hash index 7fee01cf1a..d563dc534b 100644 --- a/package/mender/mender.hash +++ b/package/mender/mender.hash @@ -1,12 +1,12 @@ # Locally computed: -sha256 9d8b2438e358dacde58c3692bd038ed9938392f1a526c49d919f73a2dff77eee mender-3.3.0.tar.gz +sha256 8a149b11b990beb7620b372023eec28df63cee6a1aa4132e88ecef554f080f72 mender-3.4.0.tar.gz # Vendor licenses # Generated with sed '/^[A-Za-z0-9_]/s/^/sha256 /' LIC_FILES_CHKSUM.sha256 # Apache-2.0 license. sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a vendor/github.com/mendersoftware/mender-artifact/LICENSE +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b vendor/github.com/mendersoftware/mender-artifact/LICENSE sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/github.com/minio/sha256-simd/LICENSE sha256 8f5d89b47d7a05a199b77b7e0f362dad391d451ebda4ef48ba11c50c071564c7 vendor/github.com/mendersoftware/progressbar/LICENSE @@ -42,4 +42,4 @@ sha256 08eab1118c80885fa1fa6a6dd7303f65a379fcb3733e063d20d1bbc2c76e6fa1 vendor sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 vendor/github.com/bmatsuo/lmdb-go/LICENSE.mdb.md # sha256 of all the vendor licenses combined -sha256 e6d8321e71be932e08b8923fe9e24e06a95c7e74a6b86e6f73696436ae0ea54f LIC_FILES_CHKSUM.sha256 +sha256 93d9db9b43097b174e362ac8f398aa9a37fcdde2974d0567b62bd6d1e0d22037 LIC_FILES_CHKSUM.sha256 diff --git a/package/mender/mender.mk b/package/mender/mender.mk index 5c3c593da6..724295f784 100644 --- a/package/mender/mender.mk +++ b/package/mender/mender.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_VERSION = 3.3.0 +MENDER_VERSION = 3.4.0 MENDER_SITE = $(call github,mendersoftware,mender,$(MENDER_VERSION)) MENDER_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, OLDAP-2.8 -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:48 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:48 -0700 Subject: [Buildroot] [PATCH 2/4] package/mender-connect: bump version to 2.1.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-2-aduskett@gmail.com> Signed-off-by: Adam Duskett --- package/mender-connect/mender-connect.hash | 2 +- package/mender-connect/mender-connect.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mender-connect/mender-connect.hash b/package/mender-connect/mender-connect.hash index 46f37f954b..da4ec5fbbd 100644 --- a/package/mender-connect/mender-connect.hash +++ b/package/mender-connect/mender-connect.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 6410bcd76cebd21e9f18fe5768928d67163e4bb2b6ae76d0e20815400d907657 mender-connect-2.0.2.tar.gz +sha256 96b81bb4c72eb8c1756febb94101c0dea5a6d4884591824e61a5f2509cd9ca9b mender-connect-2.1.0.tar.gz sha256 78b3954421ec6499c3f9735b96d52288574ae80c747416a52548d7f526f26e8c LIC_FILES_CHKSUM.sha256 # Vendor licenses diff --git a/package/mender-connect/mender-connect.mk b/package/mender-connect/mender-connect.mk index 1b0285cffc..36ddd5f7db 100644 --- a/package/mender-connect/mender-connect.mk +++ b/package/mender-connect/mender-connect.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_CONNECT_VERSION = 2.0.2 +MENDER_CONNECT_VERSION = 2.1.0 MENDER_CONNECT_SITE = $(call github,mendersoftware,mender-connect,$(MENDER_CONNECT_VERSION)) MENDER_CONNECT_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:49 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:49 -0700 Subject: [Buildroot] [PATCH 3/4] package/mender-artifact: bump version to 3.9.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-3-aduskett@gmail.com> Changes: New licenses: Apache 2.0: - vendor/github.com/mendersoftware/openssl/LICENSE BSD 3 Clause: - vendor/golang.org/x/crypto/LICENSE - vendor/golang.org/x/time/LICENSE mender-artifact now requires OpenSSL, and is incompatible with OpenSSL3. As such, the host-pkgconf and host-libopenssl packages are now dependencies to prevent linking errors against OpenSSL3 on newer distributions such as Fedora 35. Signed-off-by: Adam Duskett --- package/mender-artifact/Config.in.host | 1 + package/mender-artifact/mender-artifact.hash | 7 +++++-- package/mender-artifact/mender-artifact.mk | 16 +++++++++++++--- 3 files changed, 19 insertions(+), 5 deletions(-) diff --git a/package/mender-artifact/Config.in.host b/package/mender-artifact/Config.in.host index c7be0ed261..1879b4aa74 100644 --- a/package/mender-artifact/Config.in.host +++ b/package/mender-artifact/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MENDER_ARTIFACT bool "host mender-artifact" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_PKGCONF help The mender-artifact tool is a CLI implementation of the Mender artifacts library. diff --git a/package/mender-artifact/mender-artifact.hash b/package/mender-artifact/mender-artifact.hash index 8262e26bf0..58a8cc663d 100644 --- a/package/mender-artifact/mender-artifact.hash +++ b/package/mender-artifact/mender-artifact.hash @@ -1,6 +1,6 @@ # Locally computed: -sha256 d3ed68d8637195ff35de97b12c8fa148cebffb1ee0fd0d43909ec1643c0c296a mender-artifact-3.8.0.tar.gz -sha256 b8462a14975e30fb0dff14ed50e7563e833ccce13c2aa93f95386ffe877ed673 LIC_FILES_CHKSUM.sha256 +sha256 cb6d4da1bef47b5ddab311ffe5c7331073d6c98f2a8dac29ddced36feac29e5e mender-artifact-3.9.0.tar.gz +sha256 5635790313f33aea860583427e8e73792e99c5dfb947d4025c0102011564af50 LIC_FILES_CHKSUM.sha256 # License hash extracted from LIC_FILES_CHKSUM.sha256 using the # following command: @@ -22,6 +22,7 @@ sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd vendor sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/golang/groupcache/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/gopkg.in/square/go-jose.v2/LICENSE sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 vendor/github.com/oklog/run/LICENSE +sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE # # BSD 2 Clause licenses. @@ -44,6 +45,8 @@ sha256 fc0a2f71df4e8f047902da53d1f85301be43e0f360fc167057a2d04658ed2ba9 vendor sha256 4835612df0098ca95f8e7d9e3bffcb02358d435dbb38057c844c99d7f725eb20 vendor/google.golang.org/protobuf/LICENSE sha256 8778a9fc1eaffb03ab873caae251df2d224f6b5502be8777d3cd573a4dd43903 vendor/github.com/golang/protobuf/LICENSE sha256 b95218cd9607855a6536384c0262922b30a0c2bf56e4ced790240f3a3bac4722 vendor/github.com/googleapis/gax-go/v2/LICENSE +sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 vendor/golang.org/x/crypto/LICENSE +sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 vendor/golang.org/x/time/LICENSE sha256 f69f157b0be75da373605dbc8bbf142e8924ee82d8f44f11bcaf351335bf98cf vendor/github.com/golang/snappy/LICENSE sha256 dd26a7abddd02e2d0aba97805b31f248ef7835d9e10da289b22e3b8ab78b324d vendor/gopkg.in/square/go-jose.v2/json/LICENSE sha256 6a358d2540ca14048f02d366f23787c0a480157e58f058113f0e27168dd4e447 vendor/github.com/pierrec/lz4/LICENSE diff --git a/package/mender-artifact/mender-artifact.mk b/package/mender-artifact/mender-artifact.mk index 1031166f34..a5f79ea449 100644 --- a/package/mender-artifact/mender-artifact.mk +++ b/package/mender-artifact/mender-artifact.mk @@ -4,7 +4,7 @@ # ################################################################################ -HOST_MENDER_ARTIFACT_VERSION = 3.8.0 +HOST_MENDER_ARTIFACT_VERSION = 3.9.0 HOST_MENDER_ARTIFACT_SITE = $(call github,mendersoftware,mender-artifact,$(HOST_MENDER_ARTIFACT_VERSION)) HOST_MENDER_ARTIFACT_LICENSE = Apache2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, MPL-2.0 HOST_MENDER_ARTIFACT_LICENSE_FILES = \ @@ -23,6 +23,7 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/github.com/golang/groupcache/LICENSE \ vendor/gopkg.in/square/go-jose.v2/LICENSE \ vendor/github.com/oklog/run/LICENSE \ + vendor/github.com/mendersoftware/openssl/LICENSE \ vendor/github.com/pkg/errors/LICENSE \ vendor/github.com/pmezard/go-difflib/LICENSE \ vendor/golang.org/x/sys/LICENSE \ @@ -40,6 +41,8 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/google.golang.org/protobuf/LICENSE \ vendor/github.com/golang/protobuf/LICENSE \ vendor/github.com/googleapis/gax-go/v2/LICENSE \ + vendor/golang.org/x/crypto/LICENSE \ + vendor/golang.org/x/time/LICENSE \ vendor/github.com/golang/snappy/LICENSE \ vendor/gopkg.in/square/go-jose.v2/json/LICENSE \ vendor/github.com/pierrec/lz4/LICENSE \ @@ -84,7 +87,7 @@ HOST_MENDER_ARTIFACT_LICENSE_FILES = \ vendor/github.com/hashicorp/go-multierror/LICENSE \ vendor/github.com/hashicorp/golang-lru/LICENSE -HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz +HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz host-libopenssl host-pkgconf # By default, go will attempt to download needed modules before building, which # is not desirable. This behavior also causes permission issues when cleaning, @@ -92,7 +95,14 @@ HOST_MENDER_ARTIFACT_DEPENDENCIES = host-xz # includes the modules in the vendor directory, mod=vendor prevents the package # from downloading the go modules during the build process and prevents # permission issues when cleaning. -HOST_MENDER_ARTIFACT_GO_ENV = GOFLAGS="-mod=vendor" +# +# Mender-artifact requires OpenSSL, and is not yet compatible with OpenSSL3. +# Mender-artifact also uses pkgconf to find the OpenSSL library. +# Use host-pkgconf to force mender-artifact to use Buildroots host-openssl, as +# newer distributions, such as Fedora, are starting to use OpenSSL3. +HOST_MENDER_ARTIFACT_GO_ENV = \ + GOFLAGS="-mod=vendor" \ + PKG_CONFIG_PATH="$(HOST_DIR)/lib/pkgconfig" HOST_MENDER_ARTIFACT_LDFLAGS = -X github.com/mendersoftware/mender-artifact/cli.Version=$(HOST_MENDER_ARTIFACT_VERSION) -- 2.37.3 From aduskett at gmail.com Wed Oct 5 21:21:50 2022 From: aduskett at gmail.com (Adam Duskett) Date: Wed, 5 Oct 2022 14:21:50 -0700 Subject: [Buildroot] [PATCH 4/4] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221005212150.1384370-4-aduskett@gmail.com> mender-grubenv no longer uses the mender_grubenv* directories, instead opting to put the mender_grubenv directories in a grub-mender-grubenv top-level directory. While there is a legacy install mode which keeps the two separate directories, it is better to move forward and rip the bandaid off before it becomes too painful to update in the future if the legacy option is removed entirely. - Update the license file sha256 sum due to a year change. - mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied manually to grub.cfg. - BOOT_DIR replaces ENV_DIR in the Makefile. - The sleep grub2 module is now a requirement. - /etc/mender_grubenv.config file must be present on the system for the grub-mender-grubenv-{print,set} scripts to work properly. In addition to the above changes, update the mender example board file to work with the updated mender-grubenv version. Signed-off-by: Adam Duskett --- board/mender/x86_64/genimage-efi.cfg | 3 +++ configs/mender_x86_64_efi_defconfig | 2 +- package/mender-grubenv/mender-grubenv.hash | 4 ++-- package/mender-grubenv/mender-grubenv.mk | 22 +++++++++++++++------- 4 files changed, 21 insertions(+), 10 deletions(-) diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg index 10cefe2380..4ed064c498 100644 --- a/board/mender/x86_64/genimage-efi.cfg +++ b/board/mender/x86_64/genimage-efi.cfg @@ -3,6 +3,9 @@ image efi-part.vfat { file EFI { image = "efi-part/EFI" } + file grub-mender-grubenv { + image = "efi-part/grub-mender-grubenv" + } file bzImage { image = "bzImage" } diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 6919a60c90..02081035ff 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -19,7 +19,7 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_X86_64_EFI=y # Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES -BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp" +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep" BR2_TARGET_GRUB2_INSTALL_TOOLS=y # Required tools to create a mender image diff --git a/package/mender-grubenv/mender-grubenv.hash b/package/mender-grubenv/mender-grubenv.hash index 3be5f51a9e..193bff073b 100644 --- a/package/mender-grubenv/mender-grubenv.hash +++ b/package/mender-grubenv/mender-grubenv.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00a574d2bed8d54ba6739700da789a420a02de900df56dd2cfbe0df460a98dca mender-grubenv-1a7db967495bbe8be53b7a69dcb42822f39d9a74.tar.gz -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a LICENSE +sha256 b7a08eb3d996afb38c1a4f7c51b7eb44aec6197ff713ce75e4f39d5b448cfc82 mender-grubenv-2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b.tar.gz +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE diff --git a/package/mender-grubenv/mender-grubenv.mk b/package/mender-grubenv/mender-grubenv.mk index 9d5be8d8f4..8679ad9236 100644 --- a/package/mender-grubenv/mender-grubenv.mk +++ b/package/mender-grubenv/mender-grubenv.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_GRUBENV_VERSION = 1a7db967495bbe8be53b7a69dcb42822f39d9a74 +MENDER_GRUBENV_VERSION = 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b MENDER_GRUBENV_SITE = $(call github,mendersoftware,grub-mender-grubenv,$(MENDER_GRUBENV_VERSION)) MENDER_GRUBENV_LICENSE = Apache-2.0 MENDER_GRUBENV_LICENSE_FILES = LICENSE @@ -30,13 +30,15 @@ MENDER_GRUBENV_MODULES_MISSING_PC = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_PC)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/grub +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/grub define MENDER_GRUBENV_INSTALL_I386_CFG mkdir -p $(BINARIES_DIR)/boot-part/grub + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/grub/grub.cfg cp -dpfr $(TARGET_DIR)/boot/grub/grub.cfg \ - $(TARGET_DIR)/boot/grub/mender_grubenv* \ - $(BINARIES_DIR)/boot-part/grub + $(TARGET_DIR)/boot/grub/grub-mender-grubenv \ + $(BINARIES_DIR)/boot-part/ endef endif # BR2_TARGET_GRUB2_HAS_LEGACY_BOOT @@ -45,13 +47,16 @@ MENDER_GRUBENV_MODULES_MISSING_EFI = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/EFI/BOOT +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/EFI/BOOT define MENDER_GRUBENV_INSTALL_EFI_CFG mkdir -p $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg \ - $(TARGET_DIR)/boot/EFI/BOOT/mender_grubenv* \ $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub-mender-grubenv \ + $(BINARIES_DIR)/efi-part/ endef endif # BR2_TARGET_GRUB2_HAS_EFI_BOOT @@ -75,7 +80,10 @@ define MENDER_GRUBENV_BUILD_CMDS endef define MENDER_GRUBENV_INSTALL_TARGET_CMDS - $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install + $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) \ + install install-boot-env + # The grub-mender-grubenv-* utilities use this file to function. + echo 'ENV_DIR=/boot/grub-mender-grubenv' > $(TARGET_DIR)/etc/mender_grubenv.config endef define MENDER_GRUBENV_INSTALL_IMAGES_CMDS -- 2.37.3 From james.hilliard1 at gmail.com Wed Oct 5 23:22:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 5 Oct 2022 17:22:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/meson: bump to version 0.63.3 Message-ID: <20221005232257.2625525-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING -- 2.34.1 From cps at microplex.com Wed Oct 5 23:28:03 2022 From: cps at microplex.com (Cem Sezer) Date: Wed, 5 Oct 2022 16:28:03 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed Message-ID: Hello, On a new build, when I run wpa_supplicant, it seems to only allow TLSv1.0. When I specify the supplicant to use a newer version of TLS in wpa_supplicant.conf under phase1, it fails and the debug output says "TLSv1: No TLS version allowed". Am I missing something? When I don't specify, it defaults to using TLSv1.0. I included all parts of wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl version 1.1.1.q Thanks in advance, Cem -------------- next part -------------- An HTML attachment was scrubbed... URL: From cps at microplex.com Thu Oct 6 01:11:11 2022 From: cps at microplex.com (Cem Sezer) Date: Wed, 5 Oct 2022 18:11:11 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed In-Reply-To: References: Message-ID: Hello, I updated to the newly released buildroot-2022.08.01 released a few days ago and it fixed the TLSv1.0 issue and it started using TLSv1.2. However, now I get the error "EAP-PEAP: TLS processing failed". Additionally, my radius server outputs "eap_peap: ERROR: TLS Alert read:fatal:bad certificate".Not sure how to proceed here. Thanks, Cem On Wed, Oct 5, 2022 at 4:28 PM Cem Sezer wrote: > Hello, > > On a new build, when I run wpa_supplicant, it seems to only allow TLSv1.0. > When I specify the supplicant to use a newer version of TLS in > wpa_supplicant.conf under phase1, it fails and the debug output says > "TLSv1: No TLS version allowed". Am I missing something? When I don't > specify, it defaults to using TLSv1.0. I included all parts of > wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using > buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl > version 1.1.1.q > > Thanks in advance, > > Cem > -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Thu Oct 6 06:41:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 06 Oct 2022 06:41:45 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-05 Message-ID: <20221006064151.B221D61012@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-05 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 1 | 0 | 5 | 2022.05.x | 19 | 11 | 0 | 30 | 2022.08.x | 5 | 10 | 0 | 15 | master | 180 | 395 | 0 | 575 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 31 glibc-2.36-44-g2628500f5dff... | 24 host-binutils-2.38 | 16 autofs-5.1.8 | 15 host-f2fs-tools-1.15.0 | 13 host-sentry-cli-1.59.0 | 12 host-go-1.19.1 | 11 sysvinit-2.99 | 11 host-cmake-3.22.3 | 10 host-pahole-73383b3a39afe86... | 10 host-gcc-initial-11.3.0 | 9 igd2-for-linux-2.1 | 9 libarchive-3.6.1 | 9 package/acpica/acpica.mk:40... | 9 linux-5.17.15 | 8 btrfs-progs-5.16.2 | 6 hdparm-9.63 | 6 host-rust-1.64.0 | 6 lxc-4.0.12 | 6 gensio-2.5.5 | 5 libglib2-2.72.3 | 5 systemd-250.4 | 5 unknown | 5 acpica-legal-info | 4 casync-4ad9bcb94bc83ff36cfc... | 4 gobject-introspection-1.72.0 | 4 tealdeer-1.5.0 | 4 uclibc-1.0.42 | 4 dahdi-linux-5c840cf43838e06... | 3 elfutils-0.186 | 3 gerbera-1.10.0 | 3 host-binutils-2.39 | 3 host-gcc-final-10.4.0 | 3 host-gdb-arc-2020.09-releas... | 3 host-lzo-2.10 | 3 linux-5.10.115-cip7 | 3 perl-5.34.1 | 3 quickjs-2021-03-27 | 3 apcupsd-3.14.14 | 2 boost-1.80.0 | 2 brltty-6.4 | 2 dieharder-3.31.1 | 2 efivar-37 | 2 fdk-aac-2.0.2 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 host-gcc-final-11.3.0 | 2 host-gcc-initial-10.4.0 | 2 host-gmp-6.2.1 | 2 host-python3-3.10.7 | 2 libglvnd-1.4.0 | 2 libgpg-error-1.45 | 2 memcached-1.6.16 | 2 musl-1.2.3 | 2 toolchain-external-codescap... | 2 wtfutil-0.41.0 | 2 /home/buildroot/autobuild/i... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.1 | 1 bcg729-1.1.1 | 1 binutils-2.38 | 1 bitcoin-0.21.2 | 1 botan-2.19.2 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 cjson-1.7.15 | 1 containerd-1.6.8 | 1 crucible-2022.05.25 | 1 dash-0.5.11.5 | 1 dropbear-2022.82 | 1 edk2-edk2-stable202102 | 1 faad2-2.10.0 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/axfs/axfs.mk:32: /home/a... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gsl-2.6 | 1 heirloom-mailx-12.5 | 1 host-binutils-2.37 | 1 host-delve-1.8.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-initial-12.2.0 | 1 host-gcc-initial-arc-2020.0... | 1 host-libcap-2.65 | 1 host-pcre-8.45 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 jpeg-turbo-2.1.4 | 1 json-c-0.16 | 1 libabseil-cpp-20220623.1 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgta-1.2.1 | 1 libnl-3.6.0 | 1 libnss-3.83 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 libselinux-3.3 | 1 libudfread-1.1.2 | 1 linux-headers-5.17.15 | 1 lttng-tools-2.13.2 | 1 mxs-bootlets-10.12.01 | 1 ntp-4.2.8p15 | 1 ntpsec-1_2_1 | 1 ocf-linux-20120127 | 1 opencv4-4.6.0 | 1 openvmtools-11.3.5-18557794 | 1 procps-ng-3.3.17 | 1 python-numpy-1.21.2 | 1 python3-3.10.7 | 1 qt-webkit-kiosk-a7720e50f2b... | 1 rtl8189es-39c17661136da48f8... | 1 rtty-7.4.0 | 1 sdl-1.2.15 | 1 stella-6.7 | 1 sysklogd-2.4.4 | 1 valgrind-3.19.0 | 1 wavemon-0.9.4 | 1 wolfssl-5.5.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/3cd106b5b52b011aae0759f57567bfcbd22c68df | nios2 | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/9d9479f30d1261a3867230cff73182132cff6fd6 | mips | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/e9bc2a3a206576f59331b6609752735e5bee492d | aarch64_be | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/95a94787c556bbec4f5f994581092e03066128d7 | powerpc64 | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/d048b7d5570651613219af5f1791459af318d445 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/91609390ce820fdcef36890095a619806284b110 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/50c2669055f103b1e003b35ffa6cdcbf628ac70f | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/8501843aad0e70ad6d5dade6060b5e248c3b709a | mipsel | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/0b1ef0e272235600f5e9bb9e4825568def354906 | ORPH sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2fde5215729db02dcb969229b43f2a0d7b727ce0 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5f998022cb0347defc9a6528f902d0803f948949 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6c15e85848739c148a2dce7a34b1cd4872f1fe5a | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9ccd1ea55e60d08bc39f3a7beb9d110e65d92ac5 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d85284c1ab2ea75c0e30f6873f27038c96a75180 | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/797794e17cedd3417a792390866bb079e7c00840 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/236ee8b0a7c94a2e24b730ac22036acc4609b137 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9a810d4606cc00765240e425a70ef82cc179e159 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/884952100a4328360b93623832fa6c6ffb096ea7 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce5db4faf547a7c0e462514d3686c803a0e113fb | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/30622b9468f5e53096e308ce8ccf796ab26fa9aa | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ec0060c8e3285038860792b99e3a43cc05204682 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/af924276c6f8c9b9a72a5b0505f55e64508600ff | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d6fb25cb565c39cc99212556c4fa653484b9cfce | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ce423da208c3e26d8b4cae7f62fa93e6339f3cb2 | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/6016f0705531499a89e1415409f258f8d1b9e2f7 | mipsel | binutils-2.38 | NOK | http://autobuild.buildroot.net/results/39cf94c193f3d8c2899a7dc71d51761968f4e9db | aarch64 | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/03495fd7b2a67a6ab40b55bc8e09f6c543f7965d | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/5f713e509bccc72320a9babc95d873c8808e5331 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/d20e1553dee6b89df5fef063b0bfd6295be1ca12 | sparc64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/4aafab65ab964beaca144617bfb4949884537305 | ORPH powerpc64le | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/1a7169f683df11442122201fa0db5efd00de0e28 | mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/d7f68b6570bf1a1e3012e8bfa017b23f3fa073e0 | aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e32ebf1c13e83d30af00bb818d04602c923b6e47 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9f4089a5aff43327e7715e3503af0b4d679ac0fc | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/96ba04fc28908f0dc48ab4878c157e4bd44ddca7 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/801872b8e92ded6695b3fdf4f6ef6bbba1e41e1c | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0a489651e3a6d5d022f1ae5d10039833cac63e85 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd6bb0811fbe423c9423476f88c0fe008cbf1006 | ORPH or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/8d7d3ec9464c0e0b7595c5d583ef9e02fb463e75 | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/ee606607992eb9ac93206ba57f8f70caf717033b | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/81b921ef5561479ac5a1e6cca102c20549d91296 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5ec4d65da580feb37759aad5dd47a0a2a8c8892c | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/992e349152823acc729bfbd1b4c2d93b945920e7 | mips64 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/38a41214af0422f4cb7e87f7ba1b59991772ed4e | ORPH riscv64 | cjson-1.7.15 | NOK | http://autobuild.buildroot.net/results/8d09b65eb15026caa80fcb1069fa75ff178ca347 | s390x | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/055afb8f34f99d0171f81640e362deb88a501fd4 | aarch64 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/051c06845046054094614f7825309a5eac472fb4 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/958ab2ed8e165b78db79488f2fc2e54facccd7a4 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb6da040ef5af1a689c0a17a31f1aba7f5902235 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e310ff84e73146ea0e1b2837207c873a670a7d1a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/257241273359cb65e15cbe8fdeca56c3ebbcd98a | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb08a3db11ce5b44eed2a9c6e55e52fee63fea7 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3fc492b6a6f3b3033ef774e126d409fb067b0625 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/264d56ced51821da3a023a2e9b6c7049c5161249 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d92a37a91ecc8a8345a9420a2daba8ce1a056f33 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ba424496d4d53fec21ae0b6451bb92edce16874a | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6b66ce4884a467bd57ebf418d9260adad2d5e231 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/83d3a391c918d87c51aabf8b602c2725f9f82df3 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c2d4bfa3b1641b104476aceb78be6c6e0a1ad38 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d872f7d5fbdfa32b557d90e26e023e51c99ce739 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1b75d4200b9d98844dc5580b0796888efb89fb45 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/702a82b963915249de51325a9ea8dde95fbef9b9 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4f9f8899f427736a1106501860eecee31fcbab91 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5ef4d5e4f047e599619e0e0602ae6a07b3d49caf | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0bc8dea0cca5852ecc717be87157d24f44f8886 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1ebcb38dbcfced98c5deea3c2a6a71cbaee8b7e0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c01e5eaf8c06655616a262596fbe450c75a63959 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/596b9b6b5b01f3fbdb1edb3da55f58bb46083af2 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/88a79b26efb0c484bb872861545adab60f95d1cc | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/98b556a61b7870eaf1b4c107067951836bee0856 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3738fa596e02b0062d91e8adb4b6e833d222c296 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/33555158e68969659803f6b1e0c7b388dba31a9f | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c3c94516d67e522835d3d0351e2d968a8d2ee4c6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ab186e07284c13ad156ee91a356f457af1309cd1 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3f3313946e0def8220070cb855034c5b443adb43 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f0812048a9a8321a9e4411f35c9d908baf6f5ea6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a6b24011bb92a6615687038a34f7864dff98376e | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6a4ad730f72f93746ba3d37ee84bb789ff70529e | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/712ab4a6f02e3c3ccd3e30015890cbcb0ecfc7e0 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/61b4d165ba40709512133d858abcf002e6d38162 | aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cf94d1fdd86e410d881bf6a1fcc84c7551800e87 | microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b9d0ff1622015a7274d35d1a6cca79194dba4481 | ORPH microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/dce071b4364184d73c3e9b8e5993f627b7c1c7b8 | microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/222ede270a1221b991065671a97e6a913d78fe68 | or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/6a76f2e69026e5fb4199999dbc36f7d98f6e6591 | aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/7ae67075cbf52b9d63693ee1d6d13b69b8a0bf36 | i486 | efivar-37 | NOK | http://autobuild.buildroot.net/results/d108dfab0b34b6454c3b49d9d038ae15d9aed85b | mips64el | efivar-37 | NOK | http://autobuild.buildroot.net/results/c165f6020f5ef6c8f566546358b136f24175ee9d | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/ebb72edcb04af2ea3380bbe2eeb9ec7bb242c117 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8ad6e1d338b4c1867350928933c527a3ae10ddf4 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/17fd3ea7eba6d63be699b28d2e07df717d26a036 | ORPH sh4a | faad2-2.10.0 | NOK | http://autobuild.buildroot.net/results/9ce3dc547587357a849372813c12aa1c5fe4e81a | x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/a75db18ef35c05567a969ef02f890a1cbb0283d7 | sh4 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/4cf1a0ea0b5737a1bb9a70c6b8aad38c258139da | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/602421847a0a635b619aa589858b247f22a7fd66 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/3785c36781adea77a6c0a2d68353ca29e856cab8 | mips64 | fs/axfs/axfs.mk:32: /home/a... | NOK | http://autobuild.buildroot.net/results/eda3e07f289f9473719bea7aaa40b8bd963d8d32 | s390x | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/8abd7312ced88c0d4778b88b1143cd80dc0e52a0 | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/04eac64d1f22ffa0e5deb9bd49325b04335aadd3 | aarch64_be | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/4d330201948a5ea0418ae2c0296258f4e58b7fb6 | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/4afc11ac62a19a4bad18132675e1245a009f9e76 | arc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/89c5b0e3019c3a28e56d188639d6841b8a7cb69e | aarch64_be | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/33e562e72ea8a0727e0606637bd15e14aeb1effc | s390x | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/0f7a45e7509cd18abacfe180bd0dbc7faa671e74 | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/44e51c5f4734ff19955ee4ca5fb3aa5d35588f67 | sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5f5cf0c17efa99d698d1392e3c370ab130527f11 | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/b3c47d7f5f15ec7e446e94c1980ce2740eb38492 | sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a9374a01bb51b57379b3fddc68817c1214b07313 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/75f47c04d17291649e819419b7c51f9ec1308c1a | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e92fcfadc34eda383da986250424ba590d076024 | mips64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/2e67a53c75592b66e87dac67bec81c2e168fe28a | sh4 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9c083b6d08a7f733f391a7a62e6a049624d676ef | mips64el | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dd6d4cac1501efd4b5c68f8bffcbd5d786fe9bee | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/283ab0ab172457e534f03cdcc7940268989d59dd | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8cb54ac34109d415985d43c28f603a0cb4af3062 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f39548293d79692c41ca1beb56da579e78846651 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86792fb815231e22465b67c1af9c524e92aa2cbf | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30e9fd7b564a5305f5200b09b5ca0da7e23ebea5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faf901a7b49beb845f571cb06759ce389e8d17dc | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a79a932fd8c9c3079c60c0d992702460ad0d5bf3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f9df5e70f12ba1d7dab09f53ec1a33e4a4cca5d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cb38cd80024a46cb09e721082d6eca3f8aaafc7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d5d3e2feee687f2b80495ca42a8eda39ca35052 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/871bc2a7b9bee02a678e595af4a443def78a7887 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbbcb4c096e31142f5aac855d34aff670513fbdf | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86c43289074dc4cf17d30cbfc5b45fd31ca7cc82 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c01f817cd28b46df17e137642447f9e17172336a | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cb726b77ae54671c4229debba75e1243809328c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9497818cc0dfdf14964b7a52a091b10b4f6b66a6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32e138ee90206fd3320730c1466479e6d5eac10d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76899407bb0410d657754ed373ad16b0b4088a80 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1b45e2bbd31e41238cfb4c8e3baffb59f48b6555 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d5c9e8debe66582eaaa79179941b6a46852de35 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cddf14ede013861d752472f1ca67484dd9cad1b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aab1eb7615c99bf819ca3aac5d8281acf3aa5268 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d568e967bdceaf441970d3d27ad8d62d12a222e5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7678744c76463b27e00974a8d13785dee46ae7f | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/7612c3cc3d983f9665c8d839b17772f7772d32c0 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/3efbe245d56fc3d654368c16af6297a637c56c2b | ORPH mipsel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c44bcfdb3479ad39451490bb61cbbcef250372a7 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/41e113fbae4284437d5f0a8b778d31193583d718 | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6b40206b6296e3d8869caa09d0e4039fe598b4a4 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/e5aa8dac401368587b0c007e405d3f64f3bd65d0 | ORPH s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/2ffb3b2a3a306a9da5058a7a43cf0b09a7ea1881 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/a9ecde22c5702139f9549217c5dda8671d0636e8 | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/92d5c48af045c5f42a2ea891d793894334fde13a | riscv32 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b2fb16195dfad3e37d1a4a8308e5710ee24d88a9 | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b844dc1dfb999d03771199a52d38d2069ec14773 | sparc64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d86e612cdb5e9ef1a9f1d88f2516e61497d5af4f | sh4aeb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/14ba95ac73b7e12b8948a3b33a1a57f660e54fc3 | sh4 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/936d756a66f42cf28314a129725016b961103dad | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/55b1fc81dd31c44728f0e2e21330a207a28fd441 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b070316213b0e99d66042d8b39c3440e23f6bf16 | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/73d7c61014ee433b3ac6f0055ec7ef97ff349f8e | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f116ec75f8de0e63ea01de32e33cc77846f8e79d | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9ca46406235c24416e48f117408ee607c88bc2b5 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/344706adf3362212254029177235030e5454a402 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a3d96ba3e7966f2439a06a7742143f499e71a1d1 | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e3a61a7983faa4eae771969488a5a9375b927dc3 | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/db089c1d3d896d7515eef90e8ca50f86a8474640 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/baea360c9ea5b8d7f3c7290dccc58ffad2496baa | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6fedaf50a4b8a0c74fb684e534f1c370df153fc4 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e4cf134ee15748ef036f6f4895733066210356aa | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ae52e74e781b7d55169a07bd7ee332a259f6e6b6 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c6326f9607d71e3b7e203dda0f963216fd84c36 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3f10ca9f9e5ad3c35262a0bdf30a7c8a040a48c1 | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ffee2f749f37b6675076bb285a8759c586922290 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/79cd053b0245b5f89b88135b2997e7d0ed6c30f7 | arc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/3a97084d02ff3afde5a64c36c5477cacf1f5b07c | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/22c1794bb8f87c4433712e8632d90694af8e8e8d | or1k | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/b073b6db135a1457e0eef6260b83c09beaaa86ae | powerpc64le | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/5ac026553cad49a3ada3aa48fe8048f3d3d35015 | microblaze | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/57b7f62a444c95ea33c36a43ba3f77aaaaa983dd | arceb | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/58807d4717f692a0e318c26f5545dba49eb4e9b6 | aarch64_be | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/b3f319065ee50f23f90217dc13e8c92a8630d8cb | or1k | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/f93ead85280ffb034233a5fa416c8481f7b0083e | aarch64 | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/3805fd1886b7b26533e82ea340d1ef42493bd469 | powerpc64le | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/d1c6a5295551309ded20c3593e11afd517eb2cf3 | arceb | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/47e87d7826872f4bf84c44e73614a93d4fcf70c0 | mips64 | host-cmake-3.22.3 | NOK | http://autobuild.buildroot.net/results/7c013471eab5c61dcc61cad559e5232645777b10 | arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/c1ab0265d41c569231d41262e4595b2c8630d1ac | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/83c51ee6853e99bf63b513aff2f92fece1a2894b | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0054da2e806673ea3373bad02ef7409564b8accf | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/10dd74f1ca995257186a2aea58338274158903d7 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/accfde92379d5f3c6b7cab4d05049129754918fd | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1881008d9a52dc2fbdacc6082d33a37d3b630311 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6e3bfbaaa138ec6c916924d93707fa7732bf96d9 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0a58d391a62d16c32efbb9ca58e0437d04ccb6ae | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3bfbc270c1b6c0426d1b21e9c933a080b15860e7 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3d52ebee93789036e9bd75fbd24e07ccacffdd1 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0ab13b7715fe8b47b21d2e1101f93e225c48d50f | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b0c0659268d53783f276d1ba24b19dc2480aa848 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ff1603cc89f1b1968f41787210ad387ba5861fa8 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/260ff1f54c22388e26f411779aade2c3a75a5471 | aarch64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/962ae0a976727581a6a4c6cba91819a9ca0ed9fa | mipsel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e965fbc043a76fdc04b796909807f2c0ada1bd4 | mips64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/007c8201a08c39206110f1e00d4c924bbfe61c03 | mipsel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/85c0982cc5151a8e26f9cb1aa929ad4c50c0f333 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6584e5a0f8d39b4df3b839dad21b0b4b8aec4d2c | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/35ba3a8f4ee8c004a8c211681d8bf0c17a0d6131 | powerpc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/17a527c54d6ee4ae51c325a3879a80ad9bac45b1 | sparc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/88069002a31bbb02bd2232d091105b7452d5000c | sh4a | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4931729f33ca988f069372800b1d8e729e07d2c7 | riscv64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/307dead51de7baa89fcb9cf3bda984775dee4fab | aarch64_be | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b3e4f05451a6afad4d8a7509aad0545f316d001 | xtensa | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/89b969ef741f9df1bfa8fb5deda9e87c7b6f4448 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ffa842fa7d687e1894a9115b46273be054ea2f8f | mips64el | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f18568987e6458d824741b8275a6894b886d8556 | m68k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/31cde30a585081af30d00e0c050c7982a3c217ee | s390x | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/06c9111a8229a5f23e4427e80152e10e25721d90 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a087053a4fdca75beccf8b769ed998ee9d424f8 | or1k | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/f5b9a71bf79b2d8970fab10cb1039678b696459a | arc | host-gcc-initial-arc-2020.0... | NOK | http://autobuild.buildroot.net/results/49f70eb744dde01718d3351fb906bc3a6b1d24e2 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/34987decdc8942e69a5bee5cd361483d579d5b15 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/d3d4c1746c63ddb39cc8174bef12f39cdd746d30 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/c352be4e2f288a9726c840120d38e9f43d4c7d80 | ORPH microblaze | host-gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/0d83dd85b0e1ee9e22e872571603499be964d439 | ORPH microblazeel | host-gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a2e8c3cb5d4f6e1c457fc887effb9be789a8d75c | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fdb2dc415c0851dadb31648e08d12d21e9684acd | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fc51949ef931284f31ac8c7e0b512eb3816a47e9 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/327c4f310ac8022ecdbb0f1984afc1d8663c31c5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dee70d0a06fd04f8f9b15f7f29f2205376eebdc9 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5f3239859c73011b5daf9e5fb073b3ab423e16c2 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ea70d95f8413a399455cb2f6e0384dad08c1a2ac | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a85ce4fb8a9e57f8641a849c9babe50d8b3a5132 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6e3467346c622df588fc0ffbdabff91ba2a21e09 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2390e7ad74639d9390503f39568b8eee3101ff75 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3fd4389df929030fb5f6fd029a249826b4d2321e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/056a0ad46ad84555663159f9ea50e29802af58e0 | sh4a | host-libcap-2.65 | NOK | http://autobuild.buildroot.net/results/f65d611a4774d7e51b391e94699f8cd6c387c42b | m68k | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/88563315d34568a8218034d366c45b9896e969dd | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/a76e968e14ad0b8d2b5c89cb8d2bd870f3676885 | ORPH sparc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7b5ecb7ac144b1b11db55d32d7c0257ae1b0028c | ORPH mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e9f759ea0ec27dd08f993ce69cd101b3b0f97a6e | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a3c2c9f787b2b8d5fcef720abb35169647df3222 | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a35e557446915344f887f271e5bc109c1add4ed6 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4fcb2392dc9497bad9a50d050c9158a7c9e6c761 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/815cf472c5a583b6a24188f6883bd29afb497896 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74b9eb06edad89f9e9092d84d6bff5ea1c8b6d78 | i586 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/45102b9fbd5d393922ab9b10a9547d4a659f3ff2 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/85495f89fc827ef33c5aa6bc96e66b57fd7c8b9f | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/71392437a1e4d229a6c3098dd31f190320a40268 | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b1b6c4a1677e87f2f88b62a97743226dbe384468 | sh4 | host-pcre-8.45 | NOK | http://autobuild.buildroot.net/results/682b1308f7330238cf935f7ea3c26634efcf3c9f | ORPH microblazeel | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/788e3bd806ed73be39c9257e0d0852f0060b8524 | x86_64 | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/1f741e37553f527a2cc4bff5f9c7959e9b3be19c | aarch64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/c7feef14ac5569967c45d2d7ff2c214b35d71d8c | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/2cb104189329e2bc535433144c27a2b1de1e1a5b | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bb49a204c39911afdb130a1b61c14fe3d87c56e3 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6380da5275e90edee616bed290434fb656a80917 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9c6058aa13664e0445b025dc357c5ad121f8ab7d | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/190b000375770bc9aadfad1a9ef9b5baa38b8802 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/92b326e996b357c7fbbd69ae6e9a3b6b848dd413 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d98618eb5560c9bdb8d715f4fd43abcd8a211ac2 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d85e82dce1f4877d699b0e3c81f3cb21b48a35c | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6361e9b2d59535898ca6525f171a4bf2e88d94ac | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/32912d94bcba126e95495ac1259ef26dd0a25014 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1eab5beadd0cfd6576dd90d9a165fe7f985db683 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f881b59f3f7eddb1fe38cce6b891627293f13208 | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2567d82fe0e28916628e7f4ba0db4c19a630e092 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d0e7fe874ff23341b7b7203a6e258de9ffc472fe | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5c1ec0f64ee7fe4e515b4b1ac2721bdb7ecd300a | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6c2bdcf91ac43d346b55e7a9858bb46eadca576a | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c80469b5efc88877287a5bb13d3bce4ed712f20 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2e1b787ac66493c3e3d2b6010677c8cd62fb1b5f | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/4cdbe8bb21618fe02d10e5fa73deb0f80a373cb1 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fffa25ef13b1bdc32484ced148317bc8449a0fd2 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b1e335563fcf5a5fb83e2a23d146f1412c044095 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/edfafc687b34cbec8d49d56a48f480e0046ec54a | m68k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f70bd078919e2cf4ff8fe901cc8d24ff18a01efe | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/676be29db95925188a161eaea7a1141709ae77a6 | i586 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4e9973bab6596debe0ba6976a6b6db26c5d258dc | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/997a6151b7cf0cc1987345a03a1b94bc626e6dec | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/212db3867dba5281f0944c5c7070e68e86a23f30 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f5a0022eeca10240fc233ee09b1364870b045753 | or1k | jpeg-turbo-2.1.4 | NOK | http://autobuild.buildroot.net/results/56fc8b39b297a683042292aa97640ed577d6b2bd | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/61f464d737ad44a3e606f82375072dfb7a631684 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/40594321f7337a1d0b7248670675721b9f82e4bf | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5ba807e1cd103b8b27b4f0848944af40253cccd4 | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/833cf56317799782c08f14c94de51d7e0817fed8 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f79ee8c5325ff61dff0ac81c3a1c36a89aab9c19 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/30494cf147a90387c7557213b0cd53380ea5a24b | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dd5efc4e45584fd42e3920523b08106fd52cb6d9 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3091f097b53502d54b9331c6ca413ddd3f7ac3f1 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/10306a333cd623d2c3369c72e3aa4f92db3e3268 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2c1fc943883bd787dda371ddf0ec9fc00116c3d8 | sh4 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/02dcd31c328fb399c4d26ac521adba9e870966cd | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/869cd350387bfdee4294c0af56c164076bea931c | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dac2abeab4ab487b289825f59944b9a28e663539 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c4497773604d15107eaefa4c5c59570cf06ca29c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f605619ed72c2ca240113ccd75a8ba3c32100d16 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cf8f70d04b5c132abdc3c9936a4799006fab6490 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e79b8dcd7cfd80e8812f3b2d12d1ff467341ad91 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/fa81249d99edb5d950dbd83788360c86596a5d11 | m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/d9ddf894ad703a8ece18fde6fdd4eecc237e9d17 | ORPH m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/1b8f4366c7302dbf68bdd6e5ff13666bd5bd7df2 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/562ea0e5fbf65463f7b9e4dbfc11429262ac56b8 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/a3d4560837a4aa6ad23721b701674f0e8a284d00 | ORPH riscv64 | libgta-1.2.1 | NOK | http://autobuild.buildroot.net/results/626820909061252015522835bc13e94d560b9510 | mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/7bf57a632aae460dbfc5982cee12d524f0c645f5 | ORPH microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5ff90b65dd8dac7c1ae148038d19c9fdd70f5ef2 | s390x | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/f47e5bb15e51870afa8f4a84aca5e4052250f577 | or1k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/b41a0cdf2dc693b923802b12ae208e3319edda2c | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/79c612e9626b70f9ab8528ce42f69388d8120755 | armeb | libudfread-1.1.2 | NOK | http://autobuild.buildroot.net/results/4248560949b2a00d7b99382769178accff561c61 | mips64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/749d83b148acc1639c124fc4fb716ee9a7a8f294 | ORPH arceb | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/daa5b5077abd76e8dde56b11796db6e882d450ce | ORPH sparc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/9551365c36072f9ee4c929c0a50c2c4094ade5f2 | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/12a610a849c49a75cb45df4fd6865875a31d6796 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/af79cc0f5745d2f05c24a474e05b32e79d3f49dd | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/2b5c0d04b1d31e440ba8c37fe6a5bddf39aa3610 | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/ff9669b38ea70114ddf1367823ca9fe9519c066f | ORPH x86_64 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/11a9f2595c2119897d9eb2b0632e3efc5c1c2068 | ORPH riscv32 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/b03b4962007ed93d000babd3d45341e8e7316b1d | ORPH powerpc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/32e4f3528fa929a4cae79a26563698d87a237120 | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/1cfc8d93d68ca54c3e9728890c7b9e9223613ebe | ORPH powerpc | linux-headers-5.17.15 | NOK | http://autobuild.buildroot.net/results/ab0d8b9d9e6ed68af3265ee300ff96ca22b9a13a | ORPH x86_64 | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/6e344c72a14610fc2a0ec3de072f5a7b61a49af5 | s390x | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4d4ed5ce8f2846209510f512feab9613f4aa4388 | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/032a5fc642e1ae2adf4a9ecdd746d9ef75a33eb1 | aarch64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/6c6e3864b8dc04d42822a6ccaf451b6bb8ae2ca9 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/2a0283cfafde46c6ab4fd4ec967f60c758bdacbd | mipsel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/62755579ccef6c8de235bba27158357c99eafdce | mips | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/f107acac1d74dcd77b52495423251e35e180eeea | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ebbc15108c5c9c794d57bbfde02bcca25e82dd51 | ORPH mipsel | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/e302ff7620ecfc5ca308576cbe0769430be0e3da | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b4d70207c737d69eb3f3f803f5fb49493f4fe057 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/324cc0f2231c65200c166e1f1cf63e438f4cac18 | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/498e9ab4129197e8db06a3f5a4eb0468f01d36ee | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/621f529d5182b194f2b96d6032b01eb7255da4d2 | ORPH i686 | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/8aceb78e9b06185eb56d2f3869df85235c982d2b | ORPH s390x | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/df409fbdd15b828b7f0b474e7ee26a2ac25e7de7 | ORPH arm | opencv4-4.6.0 | NOK | http://autobuild.buildroot.net/results/cbbfc678ed38e3e05e21d71b70e937798e037e6a | x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/799986beb77b7a7d62b00664540a594d75d0619d | xtensa | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9c9434c4ec18e893951e4d22a6e364ff747f4754 | arc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/9c64e298c0936fae451ab2ce539598672a178b56 | powerpc64le | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/bae281ba0a4b20bfe2a9963f7cbf8f3ef78a6a52 | or1k | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/4ac9ed28ee92d76326aa5e2287f52e34c4e8ad07 | x86_64 | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/e031b1801ae40c7bf1a9b72106d7576db9bbd322 | mipsel | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/2ef2829d18aacf9b56d6ea268940945a746bebeb | arc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/91b21c339346cedbcf8fa7bd623dcc48098352e8 | mips | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/0e27ac019ad3bcac168b89452251071ecf3eb996 | powerpc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/13cb41484e7d9e24cc0f6b15282c6ce8cc6e0f1b | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7775c8946aabf0bd7b0dc623eb071806ac034a9c | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/dd808f88c22aeea26addb79cbfa52dbc4982cfa5 | powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/09ffc05f0e3202bc068d531b70b1a98a5cf41744 | sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/e32d9cd8fa67cc5012d2c504f14f4fea427b7cd0 | ORPH powerpc | python-numpy-1.21.2 | NOK | http://autobuild.buildroot.net/results/9d484300ea78c627fe4ade50cbc5f20b2732e29c | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/0a8d5cf2346c0e4f37ceb507ed6886b954474768 | i686 | qt-webkit-kiosk-a7720e50f2b... | NOK | http://autobuild.buildroot.net/results/14c4f7f9f674b54c91df87e3ee93bdd554fb31a4 | microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/3e69bab7b618093b3638ed4e4aee7957cc916a53 | microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/b27007811f1488adffbf0e1d440457dafcb8ebf1 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/493e8696826ccd23b40e1747c5d3451ff163f906 | mips | rtl8189es-39c17661136da48f8... | NOK | http://autobuild.buildroot.net/results/074df1426929c3a24b83e25f74bcf6ce2ccb9b21 | sparc | rtty-7.4.0 | NOK | http://autobuild.buildroot.net/results/16422af9469de114e552124542508c3b18ea8f19 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0bebf7dd427b1e047345d16d1e708c5f6fca3be0 | ORPH aarch64 | stella-6.7 | NOK | http://autobuild.buildroot.net/results/c174353526bc07b752fd5dd77d26832bbd94841a | xtensa | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/07c38e9ba086587e148975ddf65db36f29ee36cf | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cf9d377790b800d8e47cf4368e6fc822d7abbe2f | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2b39a2551d420a83ad8d8612e2ed3515f431eae5 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/fa55906bd6b6605432f14cdc70f9afae02c1bcec | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1dc4083ca5d686feb70a817ed5517aa9bd8e250a | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4f50b91a2c12dc27a0d434cc71d7657824381d7f | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/42ed37b5f3ba6fdc2190482564b7a449db752085 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b6c467298657438efb78b87e84b53a723a601506 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1b939d42f8aa09dd242368c66cf7107ce65b23c5 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6d920fadf2a32a87c7670fedbcdee3a952811b32 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/69f80062352a6a3ce2f638104483c1da60d6bb3b | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1837b1cb4846f5ab7f9bba3be139d8d75b0690da | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/67f7cbdfaa9b3285dd5457e45da4a3ac0821f3ac | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/950c1f87eb9aebcb9bf5c6c8515e94dff6fb453a | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/55235e586fa07dedb8cc3450321dee4b7faaba60 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/de1b87619a8908c20940c16813e42be439a00f03 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/044873f9b56ae3bda9f04f84f4ed5011760fd80f | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/3421959dc622bbeb7e7fcbc41eb44f13b959b2de | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d2008966c46f094a20ec92bac1a0754fffddbe89 | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/7263bc45194454c04d4e547d5c03a96f0d8f04b5 | powerpc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/a7f9aecd656e8725b631a81ee007bfc5a4c42181 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b1b6caaf65ef53567334c3673fbf4f1683a26aa2 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/efe6d14a8b3d5a6cce479af205dd3bd0f04e07bc | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5ea9cb6144ecc0169a2f50957711456b7f0a0c2b | sparc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ae0faf1e78b639b9a9ed7bf8120be162b5ae7886 | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/591ddf7973e3a2c4ebdfe152c7221c37cbffc1bb | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0895a86ca20aa4ae435d2c03d6c14d50ccaafde5 | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/2e8284715825e1fe2ec43662f0f50c20d438a5f4 | mips | unknown | NOK | http://autobuild.buildroot.net/results/44e057f330edf64a38e4293d3c525c2f79b19d87 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/d97c4ac431fe40e5a01eba3c5f59411163ff38da | or1k | unknown | NOK | http://autobuild.buildroot.net/results/6e2e13c4a2752348352be66a2feff353e92ee336 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/14a5cc87c74a98e01efd95ed4a075c001bccdda3 | i686 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/11c3a895e5688913c1bb3470d03a5f33160ece28 | ORPH aarch64_be | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/7ac4e919435fe7f53cedd2fcde354a3f9143c3af | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/ffec4a8fea643acf277b24ebc26be121967fe508 | s390x | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/0738995a4c9368464f99b3f99197a8b0b16e1a3f | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/d854e7a904e95df7c647e9b3981cd59099862652 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/829405e4097fca0c038b421764b84ecd211010b8 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b17e761a29d6a610b63a7647028e9adbd096eb9e | Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 host-rust-1.60.0 | 2 coreutils-9.1 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 valgrind-3.19.0 | 1 wavemon-0.9.4 | 1 xenomai | 1 zfs-2.1.4 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/8d4c6d5eac97a498065dddb52ad7dec2c1fe65e3 | ORPH i686 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/b3f5204b83ce8517f5755a54742f5abc365ae915 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c14c665dc719111f252dba06579c3a73e788a2f | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/99878480489b80d8a22511d9a8890af0707ff574 | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/1f790b4b117dbee9a0560fec899f4088081a20cb | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/88c6ffa6b3a047e0704e34f8b478a48ed9874560 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e6bb244c51af257d6857d7d5a5698ffb48ebe3e5 | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/417e585c25bd0f4c0ffbacd1c7c45832d1c857c0 | ORPH nios2 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/a34e305c76a685e456400865299d666f57d490a4 | ORPH aarch64_be | xenomai | NOK | http://autobuild.buildroot.net/results/d68883629616fec507c783dce9d565f9e7f126f2 | microblaze | zfs-2.1.4 | NOK | http://autobuild.buildroot.net/results/a8fb87336b09fef8787a7889dfcccf14fe1215b9 | Classification of failures by reason for 2022.08.x -------------------------------------------------- unknown | 2 f2fs-tools-1.15.0 | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-pahole-73383b3a39afe86... | 1 libdcadec-0.2.0 | 1 linux-5.17.15 | 1 php-8.1.9 | 1 pixman-0.40.0 | 1 python-orjson-3.7.11 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2a63b2733230ff72877a5a72707ba874785a9256 | sh4a | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/ae7a5906a973194cd9f196aa0d0ca4f371d11558 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/86e15d915a007be31fb06f6a984f692d86175019 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/5bf19329f8f783e9455a1d489a066050d9fa9e09 | powerpc64le | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9dca12cdc0d14889e977f3ad784fdab8d4191fcd | ORPH arm | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/070816354ffdb9e5ca27604a91f9b82e087eb6a1 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/e0bd02e6154597137c471ac69c343e9db57e1c39 | sparc64 | python-orjson-3.7.11 | NOK | http://autobuild.buildroot.net/results/38e5f7d15d7aa35a55cce73eea8383c68b30c22a | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/8ee7eff6d3d362d16165398fd3792162a8266bb0 | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/b60766ac804cfc75cbb1da67b23de94852a474b9 | -- http://autobuild.buildroot.net From gary.bisson at boundarydevices.com Thu Oct 6 07:13:01 2022 From: gary.bisson at boundarydevices.com (Gary Bisson) Date: Thu, 6 Oct 2022 09:13:01 +0200 Subject: [Buildroot] [PATCH 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221004133057.2003750-6-aperez@igalia.com> References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-6-aperez@igalia.com> Message-ID: Hi Adrian, On Tue, Oct 04, 2022 at 04:30:57PM +0300, Adrian Perez de Castro wrote: > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > Signed-off-by: Adrian Perez de Castro > --- > package/cog/cog.hash | 8 ++++---- > package/cog/cog.mk | 37 ++++++++++++++++++++----------------- > 2 files changed, 24 insertions(+), 21 deletions(-) > > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > index aa128d73d8..a2c55c4b94 100644 > --- a/package/cog/cog.hash > +++ b/package/cog/cog.hash > @@ -1,7 +1,7 @@ > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > # Hashes for license files: > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > index 1f24bebee4..ac2ec2a30e 100644 > --- a/package/cog/cog.mk > +++ b/package/cog/cog.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -COG_VERSION = 0.14.1 > +COG_VERSION = 0.16.0 > COG_SITE = https://wpewebkit.org/releases > COG_SOURCE = cog-$(COG_VERSION).tar.xz > COG_INSTALL_STAGING = YES > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > COG_LICENSE = MIT > COG_LICENSE_FILES = COPYING > COG_CONF_OPTS = \ > - -DCOG_BUILD_PROGRAMS=ON \ > - -DCOG_PLATFORM_HEADLESS=ON \ > - -DINSTALL_MAN_PAGES=OFF \ > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > - -DUSE_SOUP2=ON > + -Ddocumentation=false \ > + -Dmanpages=false \ > + -Dprograms=true \ > + -Dsoup2=true \ I'm testing your series and it seems like the above is not correct, it should be '-Dsoup2=enabled' as soup2 isn't a boolean option. Currently it is throwing the following error: ../output/build/cog-0.16.0/meson.build:1:0: ERROR: Value "true" (of type "string") for combo option "Build with libsoup2 instead of libsoup3" is not one of the choices. Possible choices are (as string): "enabled", "disabled", "auto". By using enabled I got another failure due to the wayland platform not finding drm_fourcc.h, I submitted a patch to Cog directly[1]. Regards, Gary [1] https://github.com/Igalia/cog/pull/501 From gwenj at trabucayre.com Thu Oct 6 07:33:51 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 09:33:51 +0200 Subject: [Buildroot] [PATCH] package/python-markdown: bump version to 3.4.1 Message-ID: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou Signed-off-by: Gwenhael Goavec-Merou --- package/python-markdown/python-markdown.hash | 4 ++-- package/python-markdown/python-markdown.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-markdown/python-markdown.hash b/package/python-markdown/python-markdown.hash index b64ac77be0..66208067cc 100644 --- a/package/python-markdown/python-markdown.hash +++ b/package/python-markdown/python-markdown.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/markdown/json -md5 b6833c6326e9164ee0c662218a75e7f0 Markdown-3.3.4.tar.gz -sha256 31b5b491868dcc87d6c24b7e3d19a0d730d59d3e46f4eea6430a321bed387a49 Markdown-3.3.4.tar.gz +md5 597656cf4feadf1998b0511201620202 Markdown-3.4.1.tar.gz +sha256 3b809086bb6efad416156e00a0da66fe47618a5d6918dd688f53f40c8e4cfeff Markdown-3.4.1.tar.gz # Locally computed sha256 sha256 6f1193cb634718e65c3a537d6e25ebd614820ec0ef693cfc12248112638d64da LICENSE.md diff --git a/package/python-markdown/python-markdown.mk b/package/python-markdown/python-markdown.mk index 801360d778..1b9b556201 100644 --- a/package/python-markdown/python-markdown.mk +++ b/package/python-markdown/python-markdown.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MARKDOWN_VERSION = 3.3.4 +PYTHON_MARKDOWN_VERSION = 3.4.1 PYTHON_MARKDOWN_SOURCE = Markdown-$(PYTHON_MARKDOWN_VERSION).tar.gz -PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/49/02/37bd82ae255bb4dfef97a4b32d95906187b7a7a74970761fca1360c4ba22 +PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/85/7e/133e943e97a943d2f1d8bae0c5060f8ac50e6691754eb9dbe036b047a9bb PYTHON_MARKDOWN_LICENSE = BSD-3-Clause PYTHON_MARKDOWN_LICENSE_FILES = LICENSE.md PYTHON_MARKDOWN_SETUP_TYPE = setuptools -- 2.30.2 From aperez at igalia.com Thu Oct 6 08:47:11 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 11:47:11 +0300 Subject: [Buildroot] [PATCH 5/5] package/cog: bump to version 0.16.0 In-Reply-To: References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-6-aperez@igalia.com> Message-ID: <20221006114711.GB961467@igalia.com> Hi Gary, all, On Thu, 06 Oct 2022 09:13:01 +0200 Gary Bisson wrote: > On Tue, Oct 04, 2022 at 04:30:57PM +0300, Adrian Perez de Castro wrote: > > This new version includes support for setting proxy options and gamepad > > support. Release notes: > > > > https://wpewebkit.org/release/cog-0.16.0.html > > > > Signed-off-by: Adrian Perez de Castro > > --- > > package/cog/cog.hash | 8 ++++---- > > package/cog/cog.mk | 37 ++++++++++++++++++++----------------- > > 2 files changed, 24 insertions(+), 21 deletions(-) > > > > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > > index aa128d73d8..a2c55c4b94 100644 > > --- a/package/cog/cog.hash > > +++ b/package/cog/cog.hash > > @@ -1,7 +1,7 @@ > > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > > > # Hashes for license files: > > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > > index 1f24bebee4..ac2ec2a30e 100644 > > --- a/package/cog/cog.mk > > +++ b/package/cog/cog.mk > > @@ -4,7 +4,7 @@ > > # > > ################################################################################ > > > > -COG_VERSION = 0.14.1 > > +COG_VERSION = 0.16.0 > > COG_SITE = https://wpewebkit.org/releases > > COG_SOURCE = cog-$(COG_VERSION).tar.xz > > COG_INSTALL_STAGING = YES > > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > > COG_LICENSE = MIT > > COG_LICENSE_FILES = COPYING > > COG_CONF_OPTS = \ > > - -DCOG_BUILD_PROGRAMS=ON \ > > - -DCOG_PLATFORM_HEADLESS=ON \ > > - -DINSTALL_MAN_PAGES=OFF \ > > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > > - -DUSE_SOUP2=ON > > + -Ddocumentation=false \ > > + -Dmanpages=false \ > > + -Dprograms=true \ > > + -Dsoup2=true \ > > I'm testing your series and it seems like the above is not correct, it > should be '-Dsoup2=enabled' as soup2 isn't a boolean option. Currently > it is throwing the following error: > ../output/build/cog-0.16.0/meson.build:1:0: ERROR: Value "true" (of type "string") for combo option "Build with libsoup2 instead of libsoup3" is not one of the choices. Possible choices are (as string): "enabled", "disabled", "auto". Ouch, good catch. I had the fix for this locally in the Git stash and somehow managed to not include it in the submitted patch set. I will update the series later. > By using enabled I got another failure due to the wayland platform not > finding drm_fourcc.h, I submitted a patch to Cog directly[1]. Thanks for the patch, it's super nice when people take the initiative like this! Let's try and have that landed before I submit the new version of the patch set. > [1] https://github.com/Igalia/cog/pull/501 Cheers, ?Adri?n -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: not available URL: From gwenj at trabucayre.com Thu Oct 6 08:27:57 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 10:27:57 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 Message-ID: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou - remove all no more required patches - backport 2 patches to fix failures induces by missing headers - add dependency to SPDLOG - add pybind dependency where python is set Note: - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, bindings and python wrappers are produces using pybind: this why python-pybind is a buildtime dependency. This one is a stagging only package (nothing installed into target directory -> no select BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES is updated with python-pybind). - host-python-numpy is now required since some cpp bindings uses numpy's functions directly. python-numpy (target package) is left required because python blocks and wrappers needs this library at runtime. Signed-off-by: Gwenhael Goavec-Merou --- Changes v3 -> v4: - re-add runtime comment for numpy - remove python-pybind select - rework commit message Changes v2 -> v3: - update gnuradio version 3.10.3.0 -> 3.10.4.0 - remove patch to fix libfmt9 (now applied) - backport two patch to fix failures due to missing header - explain in commit message why pybind and numpy are now required at buildtime (Thomas) Changes v1 -> v2: - remove #runtime comment for PYTHON_NUMPY and PYTHON_PYBIND (Thomas) - remove host-python-mako to the dependencies list (now useless) (Thomas) - backport patch to fix build failure with libfmt > 9 --- ...g-missing-vector-in-blockinterleaver.patch | 42 + ....h-drop-boost-cstdint.hpp-and-use-cs.patch | 39 - ...rleaving.h-add-missing-cstddef-heade.patch | 33 + ...aceholders_with_their_full_namespace.patch | 1012 ----------------- ...rdcode-INTERFACE_INCLUDE_DIRECTORIES.patch | 57 - ...add-examples-c-subdirectory-when-gr-.patch | 55 - ...ve-deprecated-math-common_factor.hpp.patch | 165 --- package/gnuradio/Config.in | 4 +- package/gnuradio/gnuradio.hash | 2 +- package/gnuradio/gnuradio.mk | 12 +- 10 files changed, 83 insertions(+), 1338 deletions(-) create mode 100644 package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch delete mode 100644 package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch create mode 100644 package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch delete mode 100644 package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch delete mode 100644 package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch delete mode 100644 package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch delete mode 100644 package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch diff --git a/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch new file mode 100644 index 0000000000..f805e300af --- /dev/null +++ b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch @@ -0,0 +1,42 @@ +From 45fe4ac55ad88b6793d225e676205c30388ec138 Mon Sep 17 00:00:00 2001 +From: Ryan Volz +Date: Fri, 16 Sep 2022 21:05:51 -0400 +Subject: [PATCH 1/2] blocks: Including missing in blockinterleaver. + +Signed-off-by: Ryan Volz +[Retrieved (and backported) from: +https://github.com/gnuradio/gnuradio/commit/463c3477549b26b32d9b73eef30044e97c4eee64] +Signed-off-by: Gwenhael Goavec-Merou +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 2 +- + gr-blocks/lib/blockinterleaving.cc | 1 + + 2 files changed, 2 insertions(+), 1 deletion(-) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index 9d4e0f249..df831fe5a 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -12,7 +12,7 @@ + #define INCLUDED_GR_BLOCKS_BLOCKINTERLEAVING_H + + #include +- ++#include + + namespace gr { + namespace blocks { +diff --git a/gr-blocks/lib/blockinterleaving.cc b/gr-blocks/lib/blockinterleaving.cc +index fc5873e11..768ad9ea7 100644 +--- a/gr-blocks/lib/blockinterleaving.cc ++++ b/gr-blocks/lib/blockinterleaving.cc +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch b/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch deleted file mode 100644 index 532bebcf2e..0000000000 --- a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f643bc12100c67288adda3699a9e61d6a66fb529 Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Fri, 7 Feb 2020 16:49:30 +0100 -Subject: [PATCH] gr-digital:glfsr.h: drop boost/cstdint.hpp and use cstdint - -gr-digital/glfsr.h include boost/cstdint.hpp to have uintxx_t. -These types are in boost namespace but nor using namespace xxx, nor boost:: are used. -The result is : -In file included from /home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/glfsr.cc:23: -/home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/../include/gnuradio/digital/glfsr.h:42:5: error: 'uint32_t' does not name a type; did you mean 'u_int32_t'? -uint32_t d_shift_register; -^~~~~~~~ -u_int32_t - -Since Gnuradio policy is Less boost == better and C++11 is used, use cstdint -instead of boost/cstdint.hpp. - -[backported from 475e4a156b516c089175afb998acdc80b740b437] -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-digital/include/gnuradio/digital/glfsr.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gr-digital/include/gnuradio/digital/glfsr.h b/gr-digital/include/gnuradio/digital/glfsr.h -index 0b5141f1f..1003bcd01 100644 ---- a/gr-digital/include/gnuradio/digital/glfsr.h -+++ b/gr-digital/include/gnuradio/digital/glfsr.h -@@ -24,7 +24,7 @@ - #define INCLUDED_DIGITAL_GLFSR_H - - #include --#include -+#include - - namespace gr { - namespace digital { --- -2.24.1 - diff --git a/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch new file mode 100644 index 0000000000..d551793be5 --- /dev/null +++ b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch @@ -0,0 +1,33 @@ +From 901c2ad1ac88908a2e6db5615d5af39a218d826d Mon Sep 17 00:00:00 2001 +From: Gwenhael Goavec-Merou +Date: Fri, 23 Sep 2022 08:41:26 +0200 +Subject: [PATCH 2/2] blocks/blockinterleaving.h: add missing cstddef header + (required for size_t) + +Fix build failure like: + +gnuradio/gr-blocks/lib/../include/gnuradio/blocks/blockinterleaving.h:25:36: error: ???size_t??? was not declared in this scope + +This failure is due to the miss of cstddef include + +Signed-off-by: Gwenhael Goavec-Merou +[Upstream status: https://github.com/gnuradio/gnuradio/pull/6188] +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index df831fe5a..33c59e35b 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -13,6 +13,7 @@ + + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch b/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch deleted file mode 100644 index 431cc12522..0000000000 --- a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch +++ /dev/null @@ -1,1012 +0,0 @@ -From 5d4c317a372c77aa70df6ab3403d161cd41a7d17 Mon Sep 17 00:00:00 2001 -From: ponce -Date: Sun, 17 May 2020 14:02:57 +0200 -Subject: [PATCH] boost: qualify placeholders with their full namespace. - -This is needed with boost >= 1.73.0. - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3566] - -Signed-off-by: ponce -Signed-off-by: Gwenhael Goavec-Merou ---- - .../(exported from wiki) Message Passing.txt | 8 +++--- - gnuradio-runtime/lib/block.cc | 3 ++- - gr-blocks/lib/copy_impl.cc | 4 ++- - gr-blocks/lib/message_debug_impl.cc | 13 +++++++--- - gr-blocks/lib/message_strobe_impl.cc | 5 ++-- - gr-blocks/lib/message_strobe_random_impl.cc | 5 ++-- - gr-blocks/lib/multiply_matrix_impl.cc | 11 +++++--- - gr-blocks/lib/mute_impl.cc | 5 ++-- - gr-blocks/lib/nop_impl.cc | 5 ++-- - gr-blocks/lib/pdu_filter_impl.cc | 5 ++-- - gr-blocks/lib/pdu_remove_impl.cc | 5 ++-- - gr-blocks/lib/pdu_set_impl.cc | 4 ++- - gr-blocks/lib/random_pdu_impl.cc | 5 ++-- - gr-blocks/lib/repeat_impl.cc | 5 ++-- - gr-blocks/lib/socket_pdu_impl.cc | 18 ++++++++----- - .../lib/tagged_stream_multiply_length_impl.cc | 7 +++--- - gr-blocks/lib/tuntap_pdu_impl.cc | 3 ++- - gr-digital/lib/chunks_to_symbols_impl.cc | 5 ++-- - .../lib/constellation_receiver_cb_impl.cc | 14 ++++++----- - gr-digital/lib/costas_loop_cc_impl.cc | 4 ++- - gr-digital/lib/crc32_async_bb_impl.cc | 8 ++++-- - gr-digital/lib/header_payload_demux_impl.cc | 7 +++--- - .../lib/protocol_formatter_async_impl.cc | 4 ++- - gr-fec/lib/async_decoder_impl.cc | 8 ++++-- - gr-fec/lib/async_encoder_impl.cc | 8 ++++-- - gr-fec/lib/depuncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_ff_impl.cc | 4 ++- - gr-filter/lib/freq_xlating_fir_filter_impl.cc | 2 +- - gr-filter/lib/mmse_resampler_cc_impl.cc | 5 ++-- - gr-filter/lib/mmse_resampler_ff_impl.cc | 5 ++-- - gr-qtgui/lib/const_sink_c_impl.cc | 5 ++-- - gr-qtgui/lib/edit_box_msg_impl.cc | 4 ++- - gr-qtgui/lib/freq_sink_c_impl.cc | 12 ++++++--- - gr-qtgui/lib/freq_sink_f_impl.cc | 12 ++++++--- - gr-qtgui/lib/histogram_sink_f_impl.cc | 5 ++-- - gr-qtgui/lib/sink_c_impl.cc | 4 ++- - gr-qtgui/lib/sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_b_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_c_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/waterfall_sink_c_impl.cc | 13 +++++++--- - gr-qtgui/lib/waterfall_sink_f_impl.cc | 13 +++++++--- - gr-uhd/lib/usrp_block_impl.cc | 25 ++++++++++++------- - gr-uhd/lib/usrp_source_impl.cc | 5 ++-- - gr-zeromq/lib/pub_msg_sink_impl.cc | 4 ++- - gr-zeromq/lib/push_msg_sink_impl.cc | 4 ++- - 48 files changed, 213 insertions(+), 106 deletions(-) - -diff --git a/docs/usage-manual/(exported from wiki) Message Passing.txt b/docs/usage-manual/(exported from wiki) Message Passing.txt -index 4654bd5da..551e71022 100644 ---- a/docs/usage-manual/(exported from wiki) Message Passing.txt -+++ b/docs/usage-manual/(exported from wiki) Message Passing.txt -@@ -94,7 +94,7 @@ must then bind this port to the message handler. For this, we use - Boost's 'bind' function: - - set_msg_handler(pmt::pmt_t port_id, -- boost::bind(&block_class::message_handler_function, this, _1)); -+ boost::bind(&block_class::message_handler_function, this, boost::placeholders::_1)); - - In Python: - -@@ -241,15 +241,15 @@ The constructor of this block looks like this: - { - message_port_register_in(pmt::mp("print")); - set_msg_handler(pmt::mp("print"), -- boost::bind(&message_debug_impl::print, this, _1)); -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); - set_msg_handler(pmt::mp("store"), -- boost::bind(&message_debug_impl::store, this, _1)); -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); - set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - -diff --git a/gnuradio-runtime/lib/block.cc b/gnuradio-runtime/lib/block.cc -index 591428390..fca4cab97 100644 ---- a/gnuradio-runtime/lib/block.cc -+++ b/gnuradio-runtime/lib/block.cc -@@ -61,7 +61,8 @@ block::block(const std::string& name, - { - global_block_registry.register_primitive(alias(), this); - message_port_register_in(d_system_port); -- set_msg_handler(d_system_port, boost::bind(&block::system_handler, this, _1)); -+ set_msg_handler(d_system_port, -+ boost::bind(&block::system_handler, this, boost::placeholders::_1)); - - configure_default_loggers(d_logger, d_debug_logger, symbol_name()); - } -diff --git a/gr-blocks/lib/copy_impl.cc b/gr-blocks/lib/copy_impl.cc -index c377e57b1..b55196c24 100644 ---- a/gr-blocks/lib/copy_impl.cc -+++ b/gr-blocks/lib/copy_impl.cc -@@ -44,7 +44,9 @@ copy_impl::copy_impl(size_t itemsize) - d_enabled(true) - { - message_port_register_in(pmt::mp("en")); -- set_msg_handler(pmt::mp("en"), boost::bind(©_impl::handle_enable, this, _1)); -+ set_msg_handler( -+ pmt::mp("en"), -+ boost::bind(©_impl::handle_enable, this, boost::placeholders::_1)); - } - - copy_impl::~copy_impl() {} -diff --git a/gr-blocks/lib/message_debug_impl.cc b/gr-blocks/lib/message_debug_impl.cc -index a8c84aa50..916f97ca3 100644 ---- a/gr-blocks/lib/message_debug_impl.cc -+++ b/gr-blocks/lib/message_debug_impl.cc -@@ -90,14 +90,19 @@ message_debug_impl::message_debug_impl() - : block("message_debug", io_signature::make(0, 0, 0), io_signature::make(0, 0, 0)) - { - message_port_register_in(pmt::mp("print")); -- set_msg_handler(pmt::mp("print"), boost::bind(&message_debug_impl::print, this, _1)); -+ set_msg_handler( -+ pmt::mp("print"), -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); -- set_msg_handler(pmt::mp("store"), boost::bind(&message_debug_impl::store, this, _1)); -+ set_msg_handler( -+ pmt::mp("store"), -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); -- set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("print_pdu"), -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - message_debug_impl::~message_debug_impl() {} -diff --git a/gr-blocks/lib/message_strobe_impl.cc b/gr-blocks/lib/message_strobe_impl.cc -index 038eeae5a..d131b8166 100644 ---- a/gr-blocks/lib/message_strobe_impl.cc -+++ b/gr-blocks/lib/message_strobe_impl.cc -@@ -53,8 +53,9 @@ message_strobe_impl::message_strobe_impl(pmt::pmt_t msg, long period_ms) - message_port_register_out(d_port); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_impl::set_msg, this, boost::placeholders::_1)); - } - - message_strobe_impl::~message_strobe_impl() {} -diff --git a/gr-blocks/lib/message_strobe_random_impl.cc b/gr-blocks/lib/message_strobe_random_impl.cc -index 0ab5d6adc..53e641fba 100644 ---- a/gr-blocks/lib/message_strobe_random_impl.cc -+++ b/gr-blocks/lib/message_strobe_random_impl.cc -@@ -74,8 +74,9 @@ message_strobe_random_impl::message_strobe_random_impl( - new gr::thread::thread(boost::bind(&message_strobe_random_impl::run, this))); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_random_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_random_impl::set_msg, this, boost::placeholders::_1)); - } - - long message_strobe_random_impl::next_delay() -diff --git a/gr-blocks/lib/multiply_matrix_impl.cc b/gr-blocks/lib/multiply_matrix_impl.cc -index e1b9c746c..e38953bab 100644 ---- a/gr-blocks/lib/multiply_matrix_impl.cc -+++ b/gr-blocks/lib/multiply_matrix_impl.cc -@@ -235,9 +235,10 @@ multiply_matrix_impl::multiply_matrix_impl( - - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); -- set_msg_handler( -- port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ set_msg_handler(port_name, -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - template <> -@@ -257,7 +258,9 @@ multiply_matrix_impl::multiply_matrix_impl( - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); - set_msg_handler(port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - -diff --git a/gr-blocks/lib/mute_impl.cc b/gr-blocks/lib/mute_impl.cc -index bd65ce207..5c732f8f4 100644 ---- a/gr-blocks/lib/mute_impl.cc -+++ b/gr-blocks/lib/mute_impl.cc -@@ -47,8 +47,9 @@ mute_impl::mute_impl(bool mute) - d_mute(mute) - { - this->message_port_register_in(pmt::intern("set_mute")); -- this->set_msg_handler(pmt::intern("set_mute"), -- boost::bind(&mute_impl::set_mute_pmt, this, _1)); -+ this->set_msg_handler( -+ pmt::intern("set_mute"), -+ boost::bind(&mute_impl::set_mute_pmt, this, boost::placeholders::_1)); - } - - template -diff --git a/gr-blocks/lib/nop_impl.cc b/gr-blocks/lib/nop_impl.cc -index db216d97a..e9baee587 100644 ---- a/gr-blocks/lib/nop_impl.cc -+++ b/gr-blocks/lib/nop_impl.cc -@@ -44,8 +44,9 @@ nop_impl::nop_impl(size_t sizeof_stream_item) - { - // Arrange to have count_received_msgs called when messages are received. - message_port_register_in(pmt::mp("port")); -- set_msg_handler(pmt::mp("port"), -- boost::bind(&nop_impl::count_received_msgs, this, _1)); -+ set_msg_handler( -+ pmt::mp("port"), -+ boost::bind(&nop_impl::count_received_msgs, this, boost::placeholders::_1)); - } - - nop_impl::~nop_impl() {} -diff --git a/gr-blocks/lib/pdu_filter_impl.cc b/gr-blocks/lib/pdu_filter_impl.cc -index b0748eec0..63cfe47e4 100644 ---- a/gr-blocks/lib/pdu_filter_impl.cc -+++ b/gr-blocks/lib/pdu_filter_impl.cc -@@ -44,8 +44,9 @@ pdu_filter_impl::pdu_filter_impl(pmt::pmt_t k, pmt::pmt_t v, bool invert) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_filter_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_filter_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_filter_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_remove_impl.cc b/gr-blocks/lib/pdu_remove_impl.cc -index 19cc4dc76..2b97f827b 100644 ---- a/gr-blocks/lib/pdu_remove_impl.cc -+++ b/gr-blocks/lib/pdu_remove_impl.cc -@@ -42,8 +42,9 @@ pdu_remove_impl::pdu_remove_impl(pmt::pmt_t k) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_remove_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_remove_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_remove_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_set_impl.cc b/gr-blocks/lib/pdu_set_impl.cc -index 40fbc3cd8..af59ef70f 100644 ---- a/gr-blocks/lib/pdu_set_impl.cc -+++ b/gr-blocks/lib/pdu_set_impl.cc -@@ -43,7 +43,9 @@ pdu_set_impl::pdu_set_impl(pmt::pmt_t k, pmt::pmt_t v) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&pdu_set_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_set_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_set_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/random_pdu_impl.cc b/gr-blocks/lib/random_pdu_impl.cc -index 75d825aef..6c142c353 100644 ---- a/gr-blocks/lib/random_pdu_impl.cc -+++ b/gr-blocks/lib/random_pdu_impl.cc -@@ -52,8 +52,9 @@ random_pdu_impl::random_pdu_impl(int min_items, - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pmt::mp("generate")); -- set_msg_handler(pmt::mp("generate"), -- boost::bind(&random_pdu_impl::generate_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("generate"), -+ boost::bind(&random_pdu_impl::generate_pdu, this, boost::placeholders::_1)); - if (length_modulo < 1) - throw std::runtime_error("length_module must be >= 1"); - if (max_items < length_modulo) -diff --git a/gr-blocks/lib/repeat_impl.cc b/gr-blocks/lib/repeat_impl.cc -index 189fbc894..d6569625d 100644 ---- a/gr-blocks/lib/repeat_impl.cc -+++ b/gr-blocks/lib/repeat_impl.cc -@@ -44,8 +44,9 @@ repeat_impl::repeat_impl(size_t itemsize, int interp) - d_interp(interp) - { - message_port_register_in(pmt::mp("interpolation")); -- set_msg_handler(pmt::mp("interpolation"), -- boost::bind(&repeat_impl::msg_set_interpolation, this, _1)); -+ set_msg_handler( -+ pmt::mp("interpolation"), -+ boost::bind(&repeat_impl::msg_set_interpolation, this, boost::placeholders::_1)); - } - - void repeat_impl::msg_set_interpolation(pmt::pmt_t msg) -diff --git a/gr-blocks/lib/socket_pdu_impl.cc b/gr-blocks/lib/socket_pdu_impl.cc -index df69f07ad..163eec3a6 100644 ---- a/gr-blocks/lib/socket_pdu_impl.cc -+++ b/gr-blocks/lib/socket_pdu_impl.cc -@@ -101,7 +101,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - start_tcp_accept(); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_server_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_server_send, -+ this, -+ boost::placeholders::_1)); - } else if (type == "TCP_CLIENT") { - boost::system::error_code error = boost::asio::error::host_not_found; - d_tcp_socket.reset(new boost::asio::ip::tcp::socket(d_io_service)); -@@ -111,7 +113,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - d_tcp_socket->set_option(boost::asio::ip::tcp::no_delay(d_tcp_no_delay)); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_client_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_client_send, -+ this, -+ boost::placeholders::_1)); - - d_tcp_socket->async_read_some( - boost::asio::buffer(d_rxbuf), -@@ -130,8 +134,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else if (type == "UDP_CLIENT") { - d_udp_socket.reset( - new boost::asio::ip::udp::socket(d_io_service, d_udp_endpoint)); -@@ -143,8 +148,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else - throw std::runtime_error("gr::blocks:socket_pdu: unknown socket type"); - -diff --git a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -index 30f4c46dc..34b95d647 100644 ---- a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -+++ b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -@@ -49,9 +49,10 @@ tagged_stream_multiply_length_impl::tagged_stream_multiply_length_impl( - set_tag_propagation_policy(TPP_DONT); - set_relative_rate(1, 1); - message_port_register_in(pmt::intern("set_scalar")); -- set_msg_handler( -- pmt::intern("set_scalar"), -- boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, this, _1)); -+ set_msg_handler(pmt::intern("set_scalar"), -+ boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, -+ this, -+ boost::placeholders::_1)); - } - - tagged_stream_multiply_length_impl::~tagged_stream_multiply_length_impl() {} -diff --git a/gr-blocks/lib/tuntap_pdu_impl.cc b/gr-blocks/lib/tuntap_pdu_impl.cc -index 4343ae1dc..0d9d7e28c 100644 ---- a/gr-blocks/lib/tuntap_pdu_impl.cc -+++ b/gr-blocks/lib/tuntap_pdu_impl.cc -@@ -96,7 +96,8 @@ tuntap_pdu_impl::tuntap_pdu_impl(std::string dev, int MTU, bool istunflag) - - // set up input message port - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&tuntap_pdu_impl::send, this, _1)); -+ set_msg_handler(pdu::pdu_port_id(), -+ boost::bind(&tuntap_pdu_impl::send, this, boost::placeholders::_1)); - } - - int tuntap_pdu_impl::tun_alloc(char* dev, int flags) -diff --git a/gr-digital/lib/chunks_to_symbols_impl.cc b/gr-digital/lib/chunks_to_symbols_impl.cc -index 26d590a66..a6810a69e 100644 ---- a/gr-digital/lib/chunks_to_symbols_impl.cc -+++ b/gr-digital/lib/chunks_to_symbols_impl.cc -@@ -53,8 +53,9 @@ chunks_to_symbols_impl::chunks_to_symbols_impl( - this->message_port_register_in(pmt::mp("set_symbol_table")); - this->set_msg_handler( - pmt::mp("set_symbol_table"), -- boost::bind( -- &chunks_to_symbols_impl::handle_set_symbol_table, this, _1)); -+ boost::bind(&chunks_to_symbols_impl::handle_set_symbol_table, -+ this, -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-digital/lib/constellation_receiver_cb_impl.cc b/gr-digital/lib/constellation_receiver_cb_impl.cc -index 7fb7559d5..7e216ece5 100644 ---- a/gr-digital/lib/constellation_receiver_cb_impl.cc -+++ b/gr-digital/lib/constellation_receiver_cb_impl.cc -@@ -61,14 +61,16 @@ constellation_receiver_cb_impl::constellation_receiver_cb_impl( - "This receiver only works with constellations of dimension 1."); - - message_port_register_in(pmt::mp("set_constellation")); -- set_msg_handler( -- pmt::mp("set_constellation"), -- boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, this, _1)); -+ set_msg_handler(pmt::mp("set_constellation"), -+ boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, -+ this, -+ boost::placeholders::_1)); - - message_port_register_in(pmt::mp("rotate_phase")); -- set_msg_handler( -- pmt::mp("rotate_phase"), -- boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, this, _1)); -+ set_msg_handler(pmt::mp("rotate_phase"), -+ boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, -+ this, -+ boost::placeholders::_1)); - } - - constellation_receiver_cb_impl::~constellation_receiver_cb_impl() {} -diff --git a/gr-digital/lib/costas_loop_cc_impl.cc b/gr-digital/lib/costas_loop_cc_impl.cc -index c3b30834e..e1229e6f4 100644 ---- a/gr-digital/lib/costas_loop_cc_impl.cc -+++ b/gr-digital/lib/costas_loop_cc_impl.cc -@@ -82,7 +82,9 @@ costas_loop_cc_impl::costas_loop_cc_impl(float loop_bw, int order, bool use_snr) - - message_port_register_in(pmt::mp("noise")); - set_msg_handler(pmt::mp("noise"), -- boost::bind(&costas_loop_cc_impl::handle_set_noise, this, _1)); -+ boost::bind(&costas_loop_cc_impl::handle_set_noise, -+ this, -+ boost::placeholders::_1)); - } - - costas_loop_cc_impl::~costas_loop_cc_impl() {} -diff --git a/gr-digital/lib/crc32_async_bb_impl.cc b/gr-digital/lib/crc32_async_bb_impl.cc -index bffbb2a73..66143866c 100644 ---- a/gr-digital/lib/crc32_async_bb_impl.cc -+++ b/gr-digital/lib/crc32_async_bb_impl.cc -@@ -48,9 +48,13 @@ crc32_async_bb_impl::crc32_async_bb_impl(bool check) - message_port_register_out(d_out_port); - - if (check) -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::check, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::check, this, boost::placeholders::_1)); - else -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::calc, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::calc, this, boost::placeholders::_1)); - } - - crc32_async_bb_impl::~crc32_async_bb_impl() {} -diff --git a/gr-digital/lib/header_payload_demux_impl.cc b/gr-digital/lib/header_payload_demux_impl.cc -index 98c805fb2..7cc1e0a4e 100644 ---- a/gr-digital/lib/header_payload_demux_impl.cc -+++ b/gr-digital/lib/header_payload_demux_impl.cc -@@ -150,9 +150,10 @@ header_payload_demux_impl::header_payload_demux_impl( - } - set_tag_propagation_policy(TPP_DONT); - message_port_register_in(msg_port_id()); -- set_msg_handler( -- msg_port_id(), -- boost::bind(&header_payload_demux_impl::parse_header_data_msg, this, _1)); -+ set_msg_handler(msg_port_id(), -+ boost::bind(&header_payload_demux_impl::parse_header_data_msg, -+ this, -+ boost::placeholders::_1)); - for (size_t i = 0; i < special_tags.size(); i++) { - d_special_tags.push_back(pmt::string_to_symbol(special_tags[i])); - d_special_tags_last_value.push_back(pmt::PMT_NIL); -diff --git a/gr-digital/lib/protocol_formatter_async_impl.cc b/gr-digital/lib/protocol_formatter_async_impl.cc -index 84b693745..c08bbb9ae 100644 ---- a/gr-digital/lib/protocol_formatter_async_impl.cc -+++ b/gr-digital/lib/protocol_formatter_async_impl.cc -@@ -55,7 +55,9 @@ protocol_formatter_async_impl::protocol_formatter_async_impl( - message_port_register_out(d_pld_port); - - set_msg_handler(d_in_port, -- boost::bind(&protocol_formatter_async_impl::append, this, _1)); -+ boost::bind(&protocol_formatter_async_impl::append, -+ this, -+ boost::placeholders::_1)); - } - - protocol_formatter_async_impl::~protocol_formatter_async_impl() {} -diff --git a/gr-fec/lib/async_decoder_impl.cc b/gr-fec/lib/async_decoder_impl.cc -index e7a668c83..5d68d13ae 100644 ---- a/gr-fec/lib/async_decoder_impl.cc -+++ b/gr-fec/lib/async_decoder_impl.cc -@@ -65,10 +65,14 @@ async_decoder_impl::async_decoder_impl(generic_decoder::sptr my_decoder, - if (d_packed) { - d_pack = new blocks::kernel::pack_k_bits(8); - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_packed, this, _1)); -+ boost::bind(&async_decoder_impl::decode_packed, -+ this, -+ boost::placeholders::_1)); - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_unpacked, this, _1)); -+ boost::bind(&async_decoder_impl::decode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - // The maximum frame size is set by the initial frame size of the decoder. -diff --git a/gr-fec/lib/async_encoder_impl.cc b/gr-fec/lib/async_encoder_impl.cc -index 811d55601..506ae5c7e 100644 ---- a/gr-fec/lib/async_encoder_impl.cc -+++ b/gr-fec/lib/async_encoder_impl.cc -@@ -64,7 +64,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - if (d_packed) { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_packed, this, _1)); -+ boost::bind(&async_encoder_impl::encode_packed, -+ this, -+ boost::placeholders::_1)); - - d_unpack = new blocks::kernel::unpack_k_bits(8); - -@@ -74,7 +76,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_unpacked, this, _1)); -+ boost::bind(&async_encoder_impl::encode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - if (d_packed || (strncmp(d_encoder->get_input_conversion(), "pack", 4) == 0)) { -diff --git a/gr-fec/lib/depuncture_bb_impl.cc b/gr-fec/lib/depuncture_bb_impl.cc -index 27d00bb5b..f64dad45f 100644 ---- a/gr-fec/lib/depuncture_bb_impl.cc -+++ b/gr-fec/lib/depuncture_bb_impl.cc -@@ -74,7 +74,9 @@ depuncture_bb_impl::depuncture_bb_impl(int puncsize, int puncpat, int delay, cha - set_fixed_rate(true); - set_relative_rate((uint64_t)d_puncsize, (uint64_t)(d_puncsize - d_puncholes)); - set_output_multiple(d_puncsize); -- // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - depuncture_bb_impl::~depuncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_bb_impl.cc b/gr-fec/lib/puncture_bb_impl.cc -index a365d6a69..f2078d8c5 100644 ---- a/gr-fec/lib/puncture_bb_impl.cc -+++ b/gr-fec/lib/puncture_bb_impl.cc -@@ -72,7 +72,9 @@ puncture_bb_impl::puncture_bb_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_bb_impl::~puncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_ff_impl.cc b/gr-fec/lib/puncture_ff_impl.cc -index c95288d69..95fb649a8 100644 ---- a/gr-fec/lib/puncture_ff_impl.cc -+++ b/gr-fec/lib/puncture_ff_impl.cc -@@ -72,7 +72,9 @@ puncture_ff_impl::puncture_ff_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_ff_impl::~puncture_ff_impl() {} -diff --git a/gr-filter/lib/freq_xlating_fir_filter_impl.cc b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -index 8ddc967ba..50ec58947 100644 ---- a/gr-filter/lib/freq_xlating_fir_filter_impl.cc -+++ b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -@@ -72,7 +72,7 @@ freq_xlating_fir_filter_impl::freq_xlating_fir_filter_impl( - boost::bind( - &freq_xlating_fir_filter_impl::handle_set_center_freq, - this, -- _1)); -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-filter/lib/mmse_resampler_cc_impl.cc b/gr-filter/lib/mmse_resampler_cc_impl.cc -index 59f9eacfa..bdce51716 100644 ---- a/gr-filter/lib/mmse_resampler_cc_impl.cc -+++ b/gr-filter/lib/mmse_resampler_cc_impl.cc -@@ -52,8 +52,9 @@ mmse_resampler_cc_impl::mmse_resampler_cc_impl(float phase_shift, float resamp_r - - set_inverse_relative_rate(d_mu_inc); - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_cc_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_cc_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_cc_impl::~mmse_resampler_cc_impl() { delete d_resamp; } -diff --git a/gr-filter/lib/mmse_resampler_ff_impl.cc b/gr-filter/lib/mmse_resampler_ff_impl.cc -index 342d9f767..3d7272711 100644 ---- a/gr-filter/lib/mmse_resampler_ff_impl.cc -+++ b/gr-filter/lib/mmse_resampler_ff_impl.cc -@@ -53,8 +53,9 @@ mmse_resampler_ff_impl::mmse_resampler_ff_impl(float phase_shift, float resamp_r - set_inverse_relative_rate(d_mu_inc); - - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_ff_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_ff_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_ff_impl::~mmse_resampler_ff_impl() { delete d_resamp; } -diff --git a/gr-qtgui/lib/const_sink_c_impl.cc b/gr-qtgui/lib/const_sink_c_impl.cc -index 852f6ee10..04d421d03 100644 ---- a/gr-qtgui/lib/const_sink_c_impl.cc -+++ b/gr-qtgui/lib/const_sink_c_impl.cc -@@ -69,8 +69,9 @@ const_sink_c_impl::const_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&const_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&const_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - for (int i = 0; i < d_nconnections; i++) { - d_residbufs_real.push_back( -diff --git a/gr-qtgui/lib/edit_box_msg_impl.cc b/gr-qtgui/lib/edit_box_msg_impl.cc -index 8713aa820..39546cbf3 100644 ---- a/gr-qtgui/lib/edit_box_msg_impl.cc -+++ b/gr-qtgui/lib/edit_box_msg_impl.cc -@@ -158,7 +158,9 @@ edit_box_msg_impl::edit_box_msg_impl(data_type_t type, - message_port_register_out(d_port); - message_port_register_in(pmt::mp("val")); - -- set_msg_handler(pmt::mp("val"), boost::bind(&edit_box_msg_impl::set_value, this, _1)); -+ set_msg_handler( -+ pmt::mp("val"), -+ boost::bind(&edit_box_msg_impl::set_value, this, boost::placeholders::_1)); - } - - edit_box_msg_impl::~edit_box_msg_impl() -diff --git a/gr-qtgui/lib/freq_sink_c_impl.cc b/gr-qtgui/lib/freq_sink_c_impl.cc -index 3a34df6ec..fe231699f 100644 ---- a/gr-qtgui/lib/freq_sink_c_impl.cc -+++ b/gr-qtgui/lib/freq_sink_c_impl.cc -@@ -82,17 +82,23 @@ freq_sink_c_impl::freq_sink_c_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_c_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_c_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/freq_sink_f_impl.cc b/gr-qtgui/lib/freq_sink_f_impl.cc -index c14bfc31f..7090d8699 100644 ---- a/gr-qtgui/lib/freq_sink_f_impl.cc -+++ b/gr-qtgui/lib/freq_sink_f_impl.cc -@@ -82,17 +82,23 @@ freq_sink_f_impl::freq_sink_f_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_f_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_f_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/histogram_sink_f_impl.cc b/gr-qtgui/lib/histogram_sink_f_impl.cc -index d16de932c..1602d1896 100644 ---- a/gr-qtgui/lib/histogram_sink_f_impl.cc -+++ b/gr-qtgui/lib/histogram_sink_f_impl.cc -@@ -81,8 +81,9 @@ histogram_sink_f_impl::histogram_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&histogram_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&histogram_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (int i = 0; i < d_nconnections + 1; i++) { -diff --git a/gr-qtgui/lib/sink_c_impl.cc b/gr-qtgui/lib/sink_c_impl.cc -index d3feb9d16..73136e789 100644 ---- a/gr-qtgui/lib/sink_c_impl.cc -+++ b/gr-qtgui/lib/sink_c_impl.cc -@@ -96,7 +96,9 @@ sink_c_impl::sink_c_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/sink_f_impl.cc b/gr-qtgui/lib/sink_f_impl.cc -index 418b630b7..d31023a51 100644 ---- a/gr-qtgui/lib/sink_f_impl.cc -+++ b/gr-qtgui/lib/sink_f_impl.cc -@@ -95,7 +95,9 @@ sink_f_impl::sink_f_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/time_raster_sink_b_impl.cc b/gr-qtgui/lib/time_raster_sink_b_impl.cc -index 045c216b0..3aa503ccf 100644 ---- a/gr-qtgui/lib/time_raster_sink_b_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_b_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_b_impl::time_raster_sink_b_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_b_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_b_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_scale = 1.0f; - -diff --git a/gr-qtgui/lib/time_raster_sink_f_impl.cc b/gr-qtgui/lib/time_raster_sink_f_impl.cc -index d186f319d..b3516e5be 100644 ---- a/gr-qtgui/lib/time_raster_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_f_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_f_impl::time_raster_sink_f_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_f_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_f_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_icols = static_cast(ceil(d_cols)); - d_tmpflt = (float*)volk_malloc(d_icols * sizeof(float), volk_get_alignment()); -diff --git a/gr-qtgui/lib/time_sink_c_impl.cc b/gr-qtgui/lib/time_sink_c_impl.cc -index b73a1c1ad..83fbda298 100644 ---- a/gr-qtgui/lib/time_sink_c_impl.cc -+++ b/gr-qtgui/lib/time_sink_c_impl.cc -@@ -80,7 +80,9 @@ time_sink_c_impl::time_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - // +2 for the PDU message buffers - for (unsigned int n = 0; n < d_nconnections + 2; n++) { -diff --git a/gr-qtgui/lib/time_sink_f_impl.cc b/gr-qtgui/lib/time_sink_f_impl.cc -index df13998d7..dd5ed12c8 100644 ---- a/gr-qtgui/lib/time_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_sink_f_impl.cc -@@ -80,7 +80,9 @@ time_sink_f_impl::time_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (unsigned int n = 0; n < d_nconnections + 1; n++) { -diff --git a/gr-qtgui/lib/waterfall_sink_c_impl.cc b/gr-qtgui/lib/waterfall_sink_c_impl.cc -index fcf2ed98b..da38d32ba 100644 ---- a/gr-qtgui/lib/waterfall_sink_c_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_c_impl.cc -@@ -118,19 +118,24 @@ waterfall_sink_c_impl::waterfall_sink_c_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_c_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_c_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_c_impl::~waterfall_sink_c_impl() -diff --git a/gr-qtgui/lib/waterfall_sink_f_impl.cc b/gr-qtgui/lib/waterfall_sink_f_impl.cc -index aa1037a47..d4231a564 100644 ---- a/gr-qtgui/lib/waterfall_sink_f_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_f_impl.cc -@@ -116,19 +116,24 @@ waterfall_sink_f_impl::waterfall_sink_f_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_f_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_f_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_f_impl::~waterfall_sink_f_impl() -diff --git a/gr-uhd/lib/usrp_block_impl.cc b/gr-uhd/lib/usrp_block_impl.cc -index 4f030159f..697d633c1 100644 ---- a/gr-uhd/lib/usrp_block_impl.cc -+++ b/gr-uhd/lib/usrp_block_impl.cc -@@ -137,12 +137,18 @@ usrp_block_impl::usrp_block_impl(const ::uhd::device_addr_t& device_addr, - // Set up message ports: - message_port_register_in(pmt::mp("command")); - set_msg_handler(pmt::mp("command"), -- boost::bind(&usrp_block_impl::msg_handler_command, this, _1)); -+ boost::bind(&usrp_block_impl::msg_handler_command, -+ this, -+ boost::placeholders::_1)); - - // cuz we lazy: --#define REGISTER_CMD_HANDLER(key, _handler) \ -- register_msg_cmd_handler(key, \ -- boost::bind(&usrp_block_impl::_handler, this, _1, _2, _3)) -+#define REGISTER_CMD_HANDLER(key, _handler) \ -+ register_msg_cmd_handler(key, \ -+ boost::bind(&usrp_block_impl::_handler, \ -+ this, \ -+ boost::placeholders::_1, \ -+ boost::placeholders::_2, \ -+ boost::placeholders::_3)) - // Register default command handlers: - REGISTER_CMD_HANDLER(cmd_freq_key(), _cmd_handler_freq); - REGISTER_CMD_HANDLER(cmd_gain_key(), _cmd_handler_gain); -@@ -257,11 +263,12 @@ bool usrp_block_impl::_check_mboard_sensors_locked() - } else if (_dev->get_clock_source(mboard_index) == "mimo") { - sensor_name = "mimo_locked"; - } -- if (not _wait_for_locked_sensor( -- get_mboard_sensor_names(mboard_index), -- sensor_name, -- boost::bind( -- &usrp_block_impl::get_mboard_sensor, this, _1, mboard_index))) { -+ if (not _wait_for_locked_sensor(get_mboard_sensor_names(mboard_index), -+ sensor_name, -+ boost::bind(&usrp_block_impl::get_mboard_sensor, -+ this, -+ boost::placeholders::_1, -+ mboard_index))) { - GR_LOG_WARN( - d_logger, - boost::format( -diff --git a/gr-uhd/lib/usrp_source_impl.cc b/gr-uhd/lib/usrp_source_impl.cc -index a2ff0821b..5e6bd4328 100644 ---- a/gr-uhd/lib/usrp_source_impl.cc -+++ b/gr-uhd/lib/usrp_source_impl.cc -@@ -57,8 +57,9 @@ usrp_source_impl::usrp_source_impl(const ::uhd::device_addr_t& device_addr, - - _samp_rate = this->get_samp_rate(); - _samps_per_packet = 1; -- register_msg_cmd_handler(cmd_tag_key(), -- boost::bind(&usrp_source_impl::_cmd_handler_tag, this, _1)); -+ register_msg_cmd_handler( -+ cmd_tag_key(), -+ boost::bind(&usrp_source_impl::_cmd_handler_tag, this, boost::placeholders::_1)); - } - - usrp_source_impl::~usrp_source_impl() {} -diff --git a/gr-zeromq/lib/pub_msg_sink_impl.cc b/gr-zeromq/lib/pub_msg_sink_impl.cc -index b5da7421e..957cfa411 100644 ---- a/gr-zeromq/lib/pub_msg_sink_impl.cc -+++ b/gr-zeromq/lib/pub_msg_sink_impl.cc -@@ -62,7 +62,9 @@ pub_msg_sink_impl::pub_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&pub_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&pub_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - pub_msg_sink_impl::~pub_msg_sink_impl() -diff --git a/gr-zeromq/lib/push_msg_sink_impl.cc b/gr-zeromq/lib/push_msg_sink_impl.cc -index 4140781ab..7d07d3a30 100644 ---- a/gr-zeromq/lib/push_msg_sink_impl.cc -+++ b/gr-zeromq/lib/push_msg_sink_impl.cc -@@ -62,7 +62,9 @@ push_msg_sink_impl::push_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&push_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&push_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - push_msg_sink_impl::~push_msg_sink_impl() --- -2.26.2 - diff --git a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch b/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch deleted file mode 100644 index 6b8987fa5f..0000000000 --- a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 84dea8284c521f08508bb2dcbc99db3b5d3438fd Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Thu, 27 Aug 2020 17:32:09 +0200 -Subject: [PATCH] gnuradio-runtime_pmt: dont hardcode - INTERFACE_INCLUDE_DIRECTORIES - -gnuradio-runtimeTargets.cmake and gnuradio-pmtTargets.cmake are filled -using CMAKE_INSTALL_PREFIX for INSTALL_INTERFACE. - -Since CMAKE_INSTALL_PREFIX, in buildroot, is set to /usr, these files contains -path to host system. - -With BR2_COMPILER_PARANOID_UNSAFE_PATH package using gnuradio fails with: -arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-isystem' '/usr/include' - -By simply providing 'include', produced .cmake contains: -INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" -instead of -INTERFACE_INCLUDE_DIRECTORIES "/usr/include" - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3737] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gnuradio-runtime/lib/CMakeLists.txt | 2 +- - gnuradio-runtime/lib/pmt/CMakeLists.txt | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gnuradio-runtime/lib/CMakeLists.txt b/gnuradio-runtime/lib/CMakeLists.txt -index 5aa90a5e1..fc32f473b 100644 ---- a/gnuradio-runtime/lib/CMakeLists.txt -+++ b/gnuradio-runtime/lib/CMakeLists.txt -@@ -214,7 +214,7 @@ target_link_libraries(gnuradio-runtime PUBLIC - - target_include_directories(gnuradio-runtime - PUBLIC -- $ -+ $ - $ - $ - PRIVATE -diff --git a/gnuradio-runtime/lib/pmt/CMakeLists.txt b/gnuradio-runtime/lib/pmt/CMakeLists.txt -index 9fb98d0fc..6dfcd945c 100644 ---- a/gnuradio-runtime/lib/pmt/CMakeLists.txt -+++ b/gnuradio-runtime/lib/pmt/CMakeLists.txt -@@ -33,7 +33,7 @@ target_link_libraries(gnuradio-pmt - - target_include_directories(gnuradio-pmt - PUBLIC -- $ -+ $ - $ - PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/ - ) --- -2.26.2 - diff --git a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch b/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch deleted file mode 100644 index 034c10c5cc..0000000000 --- a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 268b1a599304f58bd56c86ff09041b5912c24a0c Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Sun, 1 Nov 2020 17:24:36 +0100 -Subject: [PATCH] gr-qtgui: dont't add examples/c++ subdirectory when gr-analog - is disabled - -gr-qtgui examples needs to have gr-analog enabled, without this dependency -compile crash with: - -In file included from -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.cc:22: -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. -make[3]: *** [gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/build.make:67: -gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/display_qt.cc.o] Error 1 -make[3]: *** Waiting for unfinished jobs.... -In file included from -/somewhere/gnuradio/build/gr-qtgui/examples/c++/moc_display_qt.cpp:10: -/somewhere/gnuradio/build/gr-qtgui/examples/c++/../../../../gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. - -GR_ANALOG is not an explicit dependency of GR_QTGUI, so disable c++ examples if -user has not selected this option. - -[backported from 7470a7a3771dd90defb826b464dfe62977cb1eb6] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-qtgui/CMakeLists.txt | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/gr-qtgui/CMakeLists.txt b/gr-qtgui/CMakeLists.txt -index 8831f3ad9..561186fbd 100644 ---- a/gr-qtgui/CMakeLists.txt -+++ b/gr-qtgui/CMakeLists.txt -@@ -68,7 +68,9 @@ if(ENABLE_GR_QTGUI) - add_subdirectory(include/gnuradio/qtgui) - add_subdirectory(lib) - add_subdirectory(docs) --add_subdirectory(examples/c++) -+if (ENABLE_GR_ANALOG) -+ add_subdirectory(examples/c++) -+endif(ENABLE_GR_ANALOG) - if(ENABLE_PYTHON) - add_subdirectory(swig) - add_subdirectory(python/qtgui) --- -2.26.2 - diff --git a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch b/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch deleted file mode 100644 index 0c282b7322..0000000000 --- a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 2c767bb260a25b415e8c9c4b3ea37280b2127cec Mon Sep 17 00:00:00 2001 -From: japm48 -Date: Fri, 10 Apr 2020 23:35:30 +0200 -Subject: [PATCH] boost: remove deprecated math/common_factor.hpp - -Remove deprecation warning and prefer using std::{lcm,gcd} to Boost. -Fixes #2712. - -[Retrieved from: -https://github.com/gnuradio/gnuradio/commit/2c767bb260a25b415e8c9c4b3ea37280b2127cec] -Signed-off-by: Fabrice Fontaine ---- - .../include/gnuradio/CMakeLists.txt | 1 + - .../include/gnuradio/integer_math.h | 35 +++++++++++++++++++ - gnuradio-runtime/lib/buffer.cc | 19 ++-------- - gr-digital/lib/symbol_sync_cc_impl.cc | 4 +-- - gr-digital/lib/symbol_sync_ff_impl.cc | 4 +-- - 5 files changed, 43 insertions(+), 20 deletions(-) - create mode 100644 gnuradio-runtime/include/gnuradio/integer_math.h - -diff --git a/gnuradio-runtime/include/gnuradio/CMakeLists.txt b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -index 8d718e87b5b..056af5d6f48 100644 ---- a/gnuradio-runtime/include/gnuradio/CMakeLists.txt -+++ b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -@@ -31,6 +31,7 @@ install(FILES - gr_complex.h - hier_block2.h - high_res_timer.h -+ integer_math.h - io_signature.h - logger.h - math.h -diff --git a/gnuradio-runtime/include/gnuradio/integer_math.h b/gnuradio-runtime/include/gnuradio/integer_math.h -new file mode 100644 -index 00000000000..15141049fa4 ---- /dev/null -+++ b/gnuradio-runtime/include/gnuradio/integer_math.h -@@ -0,0 +1,35 @@ -+/* -*- c++ -*- */ -+/* -+ * Copyright 2020 Free Software Foundation, Inc. -+ * -+ * This file is part of GNU Radio -+ * -+ * SPDX-License-Identifier: GPL-3.0-or-later -+ * -+ */ -+#ifndef INCLUDED_GR_INTEGER_MATH_H -+#define INCLUDED_GR_INTEGER_MATH_H -+ -+#if (__cplusplus >= 201703L) -+ -+// Prefer C++17 goodness. -+#include -+#define GR_GCD std::gcd -+#define GR_LCM std::lcm -+ -+#elif (BOOST_VERSION >= 105800) -+ -+// Fallback: newer boost API (introduced in Boost 1.58.0). -+#include -+#define GR_GCD boost::integer::gcd -+#define GR_LCM boost::integer::lcm -+ -+#else -+ -+// Last resort: old deprecated boost API. -+#include -+#define GR_GCD boost::math::gcd -+#define GR_LCM boost::math::lcm -+ -+#endif /* __cplusplus >= 201703L */ -+#endif /* INCLUDED_GR_INTEGER_MATH_H */ -diff --git a/gnuradio-runtime/lib/buffer.cc b/gnuradio-runtime/lib/buffer.cc -index 720c72c4ee8..46d704542b1 100644 ---- a/gnuradio-runtime/lib/buffer.cc -+++ b/gnuradio-runtime/lib/buffer.cc -@@ -13,22 +13,13 @@ - #endif - #include "vmcircbuf.h" - #include -+#include - #include - #include - #include - #include - #include - --// the following header is deprecated as of Boost 1.66.0, and the --// other API was introduced in Boost 1.58.0. Since we still support --// Boost back to 1.54.0, use the older API if pre-1.5.80 and otherwise --// use the newer API. --#if (BOOST_VERSION < 105800) --#include --#else --#include --#endif -- - namespace gr { - - static long s_buffer_count = 0; // counts for debugging storage mgmt -@@ -68,13 +59,9 @@ static long s_buffer_reader_count = 0; - * - * type_size * nitems == k * page_size - */ --static long minimum_buffer_items(long type_size, long page_size) -+static inline long minimum_buffer_items(long type_size, long page_size) - { --#if (BOOST_VERSION < 105800) -- return page_size / boost::math::gcd(type_size, page_size); --#else -- return page_size / boost::integer::gcd(type_size, page_size); --#endif -+ return page_size / GR_GCD(type_size, page_size); - } - - -diff --git a/gr-digital/lib/symbol_sync_cc_impl.cc b/gr-digital/lib/symbol_sync_cc_impl.cc -index 55f85e7c6a7..55f162dc727 100644 ---- a/gr-digital/lib/symbol_sync_cc_impl.cc -+++ b/gr-digital/lib/symbol_sync_cc_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_cc_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -95,7 +95,7 @@ symbol_sync_cc_impl::symbol_sync_cc_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_ccf"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - -diff --git a/gr-digital/lib/symbol_sync_ff_impl.cc b/gr-digital/lib/symbol_sync_ff_impl.cc -index d0ec32ab192..1172c1b4f8a 100644 ---- a/gr-digital/lib/symbol_sync_ff_impl.cc -+++ b/gr-digital/lib/symbol_sync_ff_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_ff_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -97,7 +97,7 @@ symbol_sync_ff_impl::symbol_sync_ff_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_fff"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - diff --git a/package/gnuradio/Config.in b/package/gnuradio/Config.in index 103175946c..2d17fc087f 100644 --- a/package/gnuradio/Config.in +++ b/package/gnuradio/Config.in @@ -15,19 +15,19 @@ config BR2_PACKAGE_GNURADIO depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-filesystem + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-thread depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # boost-thread select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_ATOMIC select BR2_PACKAGE_BOOST_DATE_TIME - select BR2_PACKAGE_BOOST_FILESYSTEM select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS select BR2_PACKAGE_BOOST_REGEX select BR2_PACKAGE_BOOST_SYSTEM select BR2_PACKAGE_BOOST_THREAD select BR2_PACKAGE_LOG4CPP select BR2_PACKAGE_GMP + select BR2_PACKAGE_SPDLOG select BR2_PACKAGE_VOLK help GNU Radio is a free & open-source software development diff --git a/package/gnuradio/gnuradio.hash b/package/gnuradio/gnuradio.hash index 90343cf385..efa0bb462b 100644 --- a/package/gnuradio/gnuradio.hash +++ b/package/gnuradio/gnuradio.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3e293541a9ac8d78660762bae8b80c0f6195b3494e1c50c01a9fd79cc60bb624 gnuradio-3.8.2.0.tar.gz +sha256 c6b9f59447a842559b00b3a67b4ca1186e9adb8db742b25400507fedc747f2bd gnuradio-3.10.4.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gnuradio/gnuradio.mk b/package/gnuradio/gnuradio.mk index e36dce081c..cc41f1e12b 100644 --- a/package/gnuradio/gnuradio.mk +++ b/package/gnuradio/gnuradio.mk @@ -4,22 +4,19 @@ # ################################################################################ -GNURADIO_VERSION = 3.8.2.0 -GNURADIO_SITE = https://github.com/gnuradio/gnuradio/releases/download/v$(GNURADIO_VERSION) +GNURADIO_VERSION = 3.10.4.0 +GNURADIO_SITE = $(call github,gnuradio,gnuradio,v$(GNURADIO_VERSION)) GNURADIO_LICENSE = GPL-3.0+ GNURADIO_LICENSE_FILES = COPYING GNURADIO_SUPPORTS_IN_SOURCE_BUILD = NO -# host-python-mako and host-python-six are needed for volk to compile GNURADIO_DEPENDENCIES = \ host-python3 \ - host-python-mako \ - host-python-six \ - host-swig \ boost \ log4cpp \ gmp \ + spdlog \ volk GNURADIO_CONF_OPTS = \ @@ -115,7 +112,8 @@ GNURADIO_CONF_OPTS += -DENABLE_GR_FILTER=OFF endif ifeq ($(BR2_PACKAGE_GNURADIO_PYTHON),y) -GNURADIO_DEPENDENCIES += python3 +GNURADIO_DEPENDENCIES += python3 python-pybind \ + host-python-numpy host-python-packaging GNURADIO_CONF_OPTS += -DENABLE_PYTHON=ON # mandatory to install python modules in site-packages and to use # correct path for python libraries -- 2.30.2 From aperez at igalia.com Thu Oct 6 09:58:28 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:28 +0300 Subject: [Buildroot] [PATCH v3 0/5] Update WPE WebKit to 2.36.8, and then 2.38.0 In-Reply-To: <20221004133057.2003750-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-1-aperez@igalia.com> This series bump wpewebkit to the 2.36.8 release first, which includes security updates. Then the set of packages needed to run WPE (libwpe, wpebackend-fdo, cog) are updated to the recommended versions for the 2.38.x series, as documented at: https://wpewebkit.org/release/schedule/#compatible-components The separate patch with the 2.36.8 update is intended to be cherry picked into stable branches, as it does not need newer tools (compiler, C++ standard library, CMake, etc.) =) Adrian Perez de Castro (5): package/wpewebkit: security bump to version 2.36.8 package/libwpe: bump to version 1.14.0 package/wpebackend-fdo: bump to version 1.14.0 package/wpewebkit: bump to version 2.38.0 package/cog: bump to version 0.16.0 ...m-dependency-when-protocols-are-used.patch | 36 ++ package/cog/cog.hash | 8 +- package/cog/cog.mk | 37 +- package/libwpe/libwpe.hash | 8 +- package/libwpe/libwpe.mk | 2 +- package/wpebackend-fdo/wpebackend-fdo.hash | 8 +- package/wpebackend-fdo/wpebackend-fdo.mk | 2 +- ...cpp-fails-to-build-NEON-fast-path-se.patch | 328 ++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 8 +- 10 files changed, 407 insertions(+), 38 deletions(-) create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch create mode 100644 package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch --- Changes v2 -> v3: - Fixed Cog build due to incorrect Meson option usage (pointed out by Gary Bisson). - Add Cog patch to fix picking libdrm headers correctly (also Gary Bisson). --- Changes v1 -> v2: - Added a first patch with a 2.36.8 update (suggested by Thomas Petazzoni). - Added a 2.36.x version of the ARM NEON build fix (suggested by Michael Nostoff). - Added one additional patch updating cog to 0.16.0, which has been released in the interim. -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:29 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:29 +0300 Subject: [Buildroot] [PATCH v3 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-2-aperez@igalia.com> Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro --- ...cpp-fails-to-build-NEON-fast-path-se.patch | 314 ++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) create mode 100644 package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:31 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:31 +0300 Subject: [Buildroot] [PATCH v3 3/5] package/wpebackend-fdo: bump to version 1.14.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-4-aperez@igalia.com> This new version contains only small fixes after 1.12.1. Release notes: https://wpewebkit.org/release/wpebackend-fdo-1.14.0.html Signed-off-by: Adrian Perez de Castro --- package/wpebackend-fdo/wpebackend-fdo.hash | 8 ++++---- package/wpebackend-fdo/wpebackend-fdo.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/wpebackend-fdo/wpebackend-fdo.hash b/package/wpebackend-fdo/wpebackend-fdo.hash index 49c60fce0f..e2f2c6c89f 100644 --- a/package/wpebackend-fdo/wpebackend-fdo.hash +++ b/package/wpebackend-fdo/wpebackend-fdo.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpebackend-fdo-1.12.1.tar.xz.sums -md5 494f4a5b2bd89dacef37b69534b2e1ce wpebackend-fdo-1.12.1.tar.xz -sha1 72a85e4615e085926f7ad8fc8414f9c6a878ef28 wpebackend-fdo-1.12.1.tar.xz -sha256 45aa833c44ec292f31fa943b01b8cc75e54eb623ad7ba6a66fc2f118fe69e629 wpebackend-fdo-1.12.1.tar.xz +# From https://wpewebkit.org/releases/wpebackend-fdo-1.14.0.tar.xz.sums +md5 ea62dfa9ecb366598a837d7446ed48ac wpebackend-fdo-1.14.0.tar.xz +sha1 1500be9212381a404f4a46b22b90a9880ba11c01 wpebackend-fdo-1.14.0.tar.xz +sha256 e75b0cb2c7145448416e8696013d8883f675c66c11ed750e06865efec5809155 wpebackend-fdo-1.14.0.tar.xz # Hashes for license files: sha256 c9f6803371047fad3e72200ec6cd226329a5ee08ac61104c8211c2761fb46825 COPYING diff --git a/package/wpebackend-fdo/wpebackend-fdo.mk b/package/wpebackend-fdo/wpebackend-fdo.mk index 2e2bdee94e..afe37b086e 100644 --- a/package/wpebackend-fdo/wpebackend-fdo.mk +++ b/package/wpebackend-fdo/wpebackend-fdo.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEBACKEND_FDO_VERSION = 1.12.1 +WPEBACKEND_FDO_VERSION = 1.14.0 WPEBACKEND_FDO_SITE = https://wpewebkit.org/releases WPEBACKEND_FDO_SOURCE = wpebackend-fdo-$(WPEBACKEND_FDO_VERSION).tar.xz WPEBACKEND_FDO_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:30 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:30 +0300 Subject: [Buildroot] [PATCH v3 2/5] package/libwpe: bump to version 1.14.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-3-aperez@igalia.com> This version is the first stable release with support for gamepad input events and configuring target frame rates. These will be used by a follow-up update of the wpewebkit package. Release notes: https://wpewebkit.org/release/libwpe-1.14.0.html Signed-off-by: Adrian Perez de Castro --- package/libwpe/libwpe.hash | 8 ++++---- package/libwpe/libwpe.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/libwpe/libwpe.hash b/package/libwpe/libwpe.hash index 2bbe1f0749..28b7685b93 100644 --- a/package/libwpe/libwpe.hash +++ b/package/libwpe/libwpe.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/libwpe-1.12.3.tar.xz.sums -md5 e538eb8e521d92f2bde3c4cd864abaa1 libwpe-1.12.3.tar.xz -sha1 9d94c411a502a10e68f69bd1fa273539cc6af2ca libwpe-1.12.3.tar.xz -sha256 b84fdbfbc849ce4fdf084bb28b58e5463b1b4b6cc8f200dc77b41f8545d5329d libwpe-1.12.3.tar.xz +# From https://wpewebkit.org/releases/libwpe-1.14.0.tar.xz.sums +md5 f9737912975f979f9e4e01eec174a271 libwpe-1.14.0.tar.xz +sha1 7a5d51c99254fc14ffcbcca9e8550cc7940fe871 libwpe-1.14.0.tar.xz +sha256 c073305bbac5f4402cc1c8a4753bfa3d63a408901f86182051eaa5a75dd89c00 libwpe-1.14.0.tar.xz # Hashes for license files: sha256 35bef295cedbbf179eaee14328002587a0e7dc08ebf3f15ea080a6f2815f0d7b COPYING diff --git a/package/libwpe/libwpe.mk b/package/libwpe/libwpe.mk index ac533642d9..e7b3ce9eaf 100644 --- a/package/libwpe/libwpe.mk +++ b/package/libwpe/libwpe.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBWPE_VERSION = 1.12.3 +LIBWPE_VERSION = 1.14.0 LIBWPE_SITE = https://wpewebkit.org/releases LIBWPE_SOURCE = libwpe-$(LIBWPE_VERSION).tar.xz LIBWPE_INSTALL_STAGING = YES -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:32 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:32 +0300 Subject: [Buildroot] [PATCH v3 4/5] package/wpewebkit: bump to version 2.38.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-5-aperez@igalia.com> Update to a new major release which brings in improvements and a few new features. Release notes: https://wpewebkit.org/release/wpewebkit-2.38.0.html This release also includes security fixes for CVE-2022-32886, CVE-2022-32891, and CVE-2022-32912. Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html Both building documentation and support for gobject-introspection have been added in this release. Version 2.38.0 also introduces a new WebRTC implementation based on GstWebRTC. Options for them are explicitly left disabled to keep the configuration as it was, and may be enabled in follow-up patches. Lastly, the SILENCE_CROSS_COMPILATION_NOTICES option removed because it no longer exists. The patch that fixes the build on 32-bit ARM targets is also updated for the 2.38 release series. Signed-off-by: Adrian Perez de Castro --- ...cpp-fails-to-build-NEON-fast-path-se.patch | 30 ++++++++++++++----- package/wpewebkit/wpewebkit.hash | 8 ++--- package/wpewebkit/wpewebkit.mk | 8 +++-- 3 files changed, 31 insertions(+), 15 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch index b61909b2ac..ea1676abb6 100644 --- a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -1,4 +1,4 @@ -From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From da159b0150cba0e5e5251e4cc6a090440f73cb7c Mon Sep 17 00:00:00 2001 From: Adrian Perez de Castro Date: Thu, 2 Jun 2022 11:19:06 +0300 Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems @@ -35,15 +35,28 @@ left for a follow-up fix. Signed-off-by: Adrian Perez de Castro [Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] --- + Source/WebCore/Sources.txt | 1 + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- - .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/cpu/arm/filters/FELightingNEON.h | 54 +++++++++---------- .../graphics/filters/DistantLightSource.h | 4 ++ .../platform/graphics/filters/FELighting.h | 7 --- .../graphics/filters/PointLightSource.h | 4 ++ .../graphics/filters/SpotLightSource.h | 4 ++ .../software/FELightingSoftwareApplier.h | 16 ++++++ - 7 files changed, 56 insertions(+), 35 deletions(-) + 8 files changed, 58 insertions(+), 36 deletions(-) +diff --git a/Source/WebCore/Sources.txt b/Source/WebCore/Sources.txt +index 8ce3510fe1a8..efd56bcb8746 100644 +--- a/Source/WebCore/Sources.txt ++++ b/Source/WebCore/Sources.txt +@@ -2136,6 +2136,7 @@ platform/graphics/WebMResourceClient.cpp + platform/graphics/WOFFFileFormat.cpp + platform/graphics/WidthIterator.cpp + platform/graphics/cpu/arm/filters/FEBlendNeonApplier.cpp ++platform/graphics/cpu/arm/filters/FELightingNEON.cpp + platform/graphics/displaylists/DisplayList.cpp + platform/graphics/displaylists/DisplayListDrawingContext.cpp + platform/graphics/displaylists/DisplayListItems.cpp diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp index f6ff8c20a5a8..42a97ffc5372 100644 --- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp @@ -67,7 +80,7 @@ index f6ff8c20a5a8..42a97ffc5372 100644 // Calling a powf function from the assembly code would require to save // and reload a lot of NEON registers. Since the base is in range [0..1] diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h -index b17c603d40d3..e4629cda0b7c 100644 +index b17c603d40d3..c6d17f573eca 100644 --- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h @@ -24,14 +24,15 @@ @@ -98,9 +111,10 @@ index b17c603d40d3..e4629cda0b7c 100644 { - alignas(16) FELightingFloatArgumentsForNeon floatArguments; - FELightingPaintingDataForNeon neonData = { +- data.pixels->data(), + WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; + WebCore::FELightingPaintingDataForNeon neonData = { - data.pixels->data(), ++ data.pixels->bytes(), 1, - data.widthDecreasedByOne - 1, - data.heightDecreasedByOne - 1, @@ -244,7 +258,7 @@ index 0c073bc13f8c..e0db00545c17 100644 float m_surfaceScale; float m_diffuseConstant; diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h -index 5c9c7fb783e6..e53aa012ac1c 100644 +index 126b3b2350f6..d906db21aa9c 100644 --- a/Source/WebCore/platform/graphics/filters/PointLightSource.h +++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h @@ -26,6 +26,10 @@ @@ -259,7 +273,7 @@ index 5c9c7fb783e6..e53aa012ac1c 100644 class PointLightSource : public LightSource { diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h -index 04e331ec4ec0..763c8d400b00 100644 +index 641b205f986d..64380d9b6eb8 100644 --- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h +++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h @@ -26,6 +26,10 @@ @@ -274,7 +288,7 @@ index 04e331ec4ec0..763c8d400b00 100644 class SpotLightSource : public LightSource { diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h -index 3875b0a4b5de..6d3864aafb9a 100644 +index c974d92115ff..e2896660cfbd 100644 --- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h @@ -36,6 +36,7 @@ diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 9c8beecf2e..5dd64b34b7 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums -md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz -sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz -sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.38.0.tar.xz.sums +md5 e0e6b98c86351c39e41da475afc50780 wpewebkit-2.38.0.tar.xz +sha1 66e6dd1c285a21ce50370fb4d60332838d801663 wpewebkit-2.38.0.tar.xz +sha256 e653e12eca63e6371c06d4cd9efcd5492db67f7d9ef324fd5d8668b1151e72b2 wpewebkit-2.38.0.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index 0ff8204519..001c701ee9 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.8 +WPEWEBKIT_VERSION = 2.38.0 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES @@ -22,9 +22,11 @@ WPEWEBKIT_CONF_OPTS = \ -DPORT=WPE \ -DENABLE_ACCESSIBILITY=OFF \ -DENABLE_API_TESTS=OFF \ + -DENABLE_DOCUMENTATION=OFF \ + -DENABLE_INTROSPECTION=OFF \ -DENABLE_MINIBROWSER=OFF \ - -DUSE_SOUP2=ON \ - -DSILENCE_CROSS_COMPILATION_NOTICES=ON + -DENABLE_WEB_RTC=OFF \ + -DUSE_SOUP2=ON ifeq ($(BR2_PACKAGE_WPEWEBKIT_SANDBOX),y) WPEWEBKIT_CONF_OPTS += \ -- 2.38.0 From aperez at igalia.com Thu Oct 6 09:58:33 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Thu, 6 Oct 2022 12:58:33 +0300 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-1-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> Message-ID: <20221006095833.1116173-6-aperez@igalia.com> This new version includes support for setting proxy options and gamepad support. Release notes: https://wpewebkit.org/release/cog-0.16.0.html This imports a small patch to properly pick libdrm compiler flags, fetched from the upstream repository. Signed-off-by: Adrian Perez de Castro --- ...m-dependency-when-protocols-are-used.patch | 36 ++++++++++++++++++ package/cog/cog.hash | 8 ++-- package/cog/cog.mk | 37 ++++++++++--------- 3 files changed, 60 insertions(+), 21 deletions(-) create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch diff --git a/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch new file mode 100644 index 0000000000..44e555c121 --- /dev/null +++ b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch @@ -0,0 +1,36 @@ +From 9a1982c563e218b7695e6a174c8230d3b063eb27 Mon Sep 17 00:00:00 2001 +From: Gary Bisson +Date: Thu, 6 Oct 2022 09:04:22 +0200 +Subject: [PATCH] wl: Fix libdrm dependency when protocols are used + +As the comment says, cog-platform-wl.c needs drm_fourcc.h to build +properly when wayland_weston_direct_display is enabled. + +However, libdrm.pc doesn't specify "include/libdrm" as part of its +includedir but whether in its cflags. So use the compile_args dep +instead of includes to fix the build failure. + +Signed-off-by: Gary Bisson +(cherry picked from commit 32c1d9533bcdc22cbc01d02bf2e6ac0d4bda2dc2) +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://github.com/Igalia/cog/pull/501] +--- + platform/wayland/meson.build | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/platform/wayland/meson.build b/platform/wayland/meson.build +index f1e18ec..31e4460 100644 +--- a/platform/wayland/meson.build ++++ b/platform/wayland/meson.build +@@ -67,7 +67,7 @@ if wayland_platform_weston_protocols.length() > 0 + + # The code uses definitions from the drm_fourcc.h header, but does not + # need to link the library; libdrm here is only a build-time dependency. +- wayland_platform_dependencies += [dependency('libdrm').partial_dependency(includes: true)] ++ wayland_platform_dependencies += [dependency('libdrm').partial_dependency(compile_args: true)] + endif + + +-- +2.38.0 + diff --git a/package/cog/cog.hash b/package/cog/cog.hash index aa128d73d8..a2c55c4b94 100644 --- a/package/cog/cog.hash +++ b/package/cog/cog.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz # Hashes for license files: sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING diff --git a/package/cog/cog.mk b/package/cog/cog.mk index 1f24bebee4..241c4e309c 100644 --- a/package/cog/cog.mk +++ b/package/cog/cog.mk @@ -4,7 +4,7 @@ # ################################################################################ -COG_VERSION = 0.14.1 +COG_VERSION = 0.16.0 COG_SITE = https://wpewebkit.org/releases COG_SOURCE = cog-$(COG_VERSION).tar.xz COG_INSTALL_STAGING = YES @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland COG_LICENSE = MIT COG_LICENSE_FILES = COPYING COG_CONF_OPTS = \ - -DCOG_BUILD_PROGRAMS=ON \ - -DCOG_PLATFORM_HEADLESS=ON \ - -DINSTALL_MAN_PAGES=OFF \ - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ - -DUSE_SOUP2=ON + -Ddocumentation=false \ + -Dmanpages=false \ + -Dprograms=true \ + -Dsoup2=enabled \ + -Dcog_home_uri='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ + -Dplatforms='$(subst $(space),$(comma),$(strip $(COG_PLATFORMS_LIST)))' + +COG_PLATFORMS_LIST = headless ifeq ($(BR2_PACKAGE_WESTON),y) -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=ON +COG_CONF_OPTS += -Dwayland_weston_direct_display=true COG_DEPENDENCIES += weston else -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=OFF +COG_CONF_OPTS += -Dwayland_weston_direct_display=false endif ifeq ($(BR2_PACKAGE_COG_PLATFORM_FDO),y) -COG_CONF_OPTS += -DCOG_PLATFORM_WL=ON +COG_PLATFORMS_LIST += wayland COG_DEPENDENCIES += libxkbcommon wayland-protocols -else -COG_CONF_OPTS += -DCOG_PLATFORM_WL=OFF endif ifeq ($(BR2_PACKAGE_COG_PLATFORM_DRM),y) -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=ON +COG_PLATFORMS_LIST += drm COG_DEPENDENCIES += libdrm libinput libgbm libegl udev -else -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=OFF endif ifeq ($(BR2_PACKAGE_COG_USE_SYSTEM_DBUS),y) -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=ON +COG_CONF_OPTS += -Dcog_dbus_control=system else -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=OFF +COG_CONF_OPTS += -Dcog_dbus_control=user endif -$(eval $(cmake-package)) +ifeq ($(BR2_PACKAGE_LIBMANETTE),y) +COG_DEPENDENCIES += libmanette +endif + +$(eval $(meson-package)) -- 2.38.0 From quentin.schulz at theobroma-systems.com Thu Oct 6 13:18:17 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Thu, 6 Oct 2022 15:18:17 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patch files In-Reply-To: <20221003122421.39868-1-dumasv.dev@gmail.com> References: <20221003122421.39868-1-dumasv.dev@gmail.com> Message-ID: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> Hi Victor, On 10/3/22 14:24, Victor Dumas wrote: > From: vdumas > > Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine > That's the kind of numbers I like to read :) > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 60 ++++++++++++++++++++++----------------- > 1 file changed, 34 insertions(+), 26 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..c842da7013 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -125,32 +157,8 @@ main() { > > find_args+=( "-type" "f" "-print" ) > > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + export -f patch_file > + xargs -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} < <(find "${rootdir}" ${find_args[@]}) > find "${rootdir}" ${find_args[@]} -print0 | xargs -0 is probably more readable and the way it's intended to be used, c.f. second example in https://www.man7.org/linux/man-pages/man1/find.1.html#EXAMPLES Also, xargs manpage https://www.man7.org/linux/man-pages/man1/xargs.1.html#OPTIONS specifies that -P option should be used in conjunction with -L or -n to avoid spawning only one process (admittedly can't be worse than the current implementation but could be better than the suggested one). You probably also want xargs -r in the unlikely event there's no file found by find. Cheers, Quentin From tianyuanhao3 at 163.com Thu Oct 6 14:07:54 2022 From: tianyuanhao3 at 163.com (TIAN Yuanhao) Date: Thu, 6 Oct 2022 07:07:54 -0700 Subject: [Buildroot] [PATCH 1/1] package/crun: support crun as runtime in containerd Message-ID: <20221006140754.46144-1-tianyuanhao3@163.com> Create runc symlink to crun when runc is missing. See: https://github.com/containerd/containerd/discussions/6162 Signed-off-by: TIAN Yuanhao --- package/containerd/Config.in | 2 +- package/crun/crun.mk | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/package/containerd/Config.in b/package/containerd/Config.in index 0e3a55ef39..e69dd6768a 100644 --- a/package/containerd/Config.in +++ b/package/containerd/Config.in @@ -5,7 +5,7 @@ config BR2_PACKAGE_CONTAINERD depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC # runc depends on BR2_USE_MMU # util-linux - select BR2_PACKAGE_RUNC # runtime dependency + select BR2_PACKAGE_RUNC if !BR2_PACKAGE_CRUN # runtime dependency select BR2_PACKAGE_UTIL_LINUX # runtime dependency select BR2_PACKAGE_UTIL_LINUX_BINARIES select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT diff --git a/package/crun/crun.mk b/package/crun/crun.mk index 4a0c150594..19dda71a9f 100644 --- a/package/crun/crun.mk +++ b/package/crun/crun.mk @@ -36,4 +36,11 @@ else CRUN_CONF_OPTS += --disable-systemd endif +ifeq ($(BR2_PACKAGE_RUNC),) +define CRUN_CREATE_SYMLINK + ln -sf crun $(TARGET_DIR)/usr/bin/runc +endef +CRUN_POST_INSTALL_TARGET_HOOKS += CRUN_CREATE_SYMLINK +endif + $(eval $(autotools-package)) -- 2.25.1 From dumasv.dev at gmail.com Thu Oct 6 15:52:17 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 6 Oct 2022 17:52:17 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> References: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> Message-ID: <20221006155217.626248-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 26 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..c9d40e1cce 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -125,32 +159,8 @@ main() { find_args+=( "-type" "f" "-print" ) - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + export -f patch_file + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From peter at korsgaard.com Thu Oct 6 17:55:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:55:41 +0200 Subject: [Buildroot] [PATCH] linux: update cip/cip-rt kernels to version 5.10.145-cip17 In-Reply-To: <20221004153056.486957-1-angelo@amarulasolutions.com> (Angelo Compagnucci's message of "Tue, 4 Oct 2022 17:30:56 +0200") References: <20221004153056.486957-1-angelo@amarulasolutions.com> Message-ID: <87a668u99e.fsf@dell.be.48ers.dk> >>>>> "Angelo" == Angelo Compagnucci writes: > Signed-off-by: Angelo Compagnucci Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:55:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:55:52 +0200 Subject: [Buildroot] [PATCH 01/11] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 In-Reply-To: <20221004195039.931947-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 4 Oct 2022 21:50:29 +0200") References: <20221004195039.931947-1-peter@korsgaard.com> Message-ID: <875ygwu993.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for > 5.17.x headers). > Signed-off-by: Peter Korsgaard Committed series, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:57:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:57:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 In-Reply-To: <20221002211910.9526-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 2 Oct 2022 23:19:10 +0200") References: <20221002211910.9526-1-fontaine.fabrice@gmail.com> Message-ID: <871qrku969.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 > https://github.com/emikulic/darkhttpd/releases/tag/v1.14 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:58:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:58:06 +0200 Subject: [Buildroot] [PATCH] package/htpdate: bump to version 1.3.6 In-Reply-To: <20221003150939.3243425-1-angelo@amarulasolutions.com> (Angelo Compagnucci's message of "Mon, 3 Oct 2022 17:09:39 +0200") References: <20221003150939.3243425-1-angelo@amarulasolutions.com> Message-ID: <87wn9csukx.fsf@dell.be.48ers.dk> >>>>> "Angelo" == Angelo Compagnucci writes: > Signed-off-by: Angelo Compagnucci Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:59:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 19:59:18 +0200 Subject: [Buildroot] [PATCH] package/acpica: fix legal-info In-Reply-To: <20221004104056.1429815-1-nunes.erico@gmail.com> (Erico Nunes's message of "Tue, 4 Oct 2022 12:40:56 +0200") References: <20221004104056.1429815-1-nunes.erico@gmail.com> Message-ID: <87sfk0suix.fsf@dell.be.48ers.dk> >>>>> "Erico" == Erico Nunes writes: > Since the recent version bump, the license file is changed as it was > updated to the new release year. > Fixes: > http://autobuild.buildroot.net/results/93ad774a7f69e761952a3a6c92a24de7506e6312/ > Signed-off-by: Erico Nunes Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:53:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:24 +0200 Subject: [Buildroot] [git commit] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 Message-ID: <20221006175948.ED8CB86934@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=484b50507f31e90a3f955698ad10e7aad6f91b37 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for 5.17.x headers). Signed-off-by: Peter Korsgaard --- toolchain/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/toolchain/Config.in b/toolchain/Config.in index b48c69dc41..219578092b 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -580,6 +580,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 default "5.14" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 From peter at korsgaard.com Thu Oct 6 17:53:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:35 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 5.19 headers Message-ID: <20221006175949.1439886937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0551f23b05996d92c65c359ed6daa2cd15502aba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master And add (and default to) 5.19.13 to linux-headers. Signed-off-by: Peter Korsgaard --- linux/linux.hash | 1 + package/linux-headers/Config.in.host | 13 +++++++++++-- toolchain/Config.in | 5 +++++ .../toolchain-external-custom/Config.in.options | 6 +++++- 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index a1b7984489..9e75877be9 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,4 +1,5 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc +sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 9d993a2e99..856c7fd7b1 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_LINUX_HEADERS choice prompt "Kernel Headers" default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL - default BR2_KERNEL_HEADERS_5_17 + default BR2_KERNEL_HEADERS_5_19 help Select the kernel version to get headers from. @@ -56,6 +56,10 @@ config BR2_KERNEL_HEADERS_5_15 config BR2_KERNEL_HEADERS_5_17 bool "Linux 5.17.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 + +config BR2_KERNEL_HEADERS_5_19 + bool "Linux 5.19.x kernel headers" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 select BR2_KERNEL_HEADERS_LATEST config BR2_KERNEL_HEADERS_VERSION @@ -133,8 +137,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19 + bool "5.19.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 - bool "5.18.x or later" + bool "5.18.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17 @@ -387,6 +395,7 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.10.142" if BR2_KERNEL_HEADERS_5_10 default "5.15.67" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 + default "5.19.13" if BR2_KERNEL_HEADERS_5_19 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ diff --git a/toolchain/Config.in b/toolchain/Config.in index c49691cff2..0801a3c516 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -571,6 +571,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -584,6 +588,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 16f1ac0a5e..494e67516f 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_19 + bool "5.19.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 - bool "5.18.x or later" + bool "5.18.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_17 From peter at korsgaard.com Thu Oct 6 17:53:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:31 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 5.18 headers Message-ID: <20221006175949.0AA3486936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db678645eb1702e007414a9e9d5073d541a7c6d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Do not add a preconfigured 5.18.x version to linux-headers as 5.18.x is already EOL. Signed-off-by: Peter Korsgaard --- package/linux-headers/Config.in.host | 6 +++++- toolchain/Config.in | 5 +++++ .../toolchain-external/toolchain-external-custom/Config.in.options | 6 +++++- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index ab59bdd368..9d993a2e99 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -133,8 +133,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 + bool "5.18.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17 - bool "5.17.x or later" + bool "5.17.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16 diff --git a/toolchain/Config.in b/toolchain/Config.in index 219578092b..c49691cff2 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -567,6 +567,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -580,6 +584,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 6727778f42..16f1ac0a5e 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 + bool "5.18.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_17 - bool "5.17.x or later" + bool "5.17.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_16 From peter at korsgaard.com Thu Oct 6 17:53:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:40 +0200 Subject: [Buildroot] [git commit] {toolchain, linux-headers}: add support for 6.0 headers Message-ID: <20221006175949.1DFDA86938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4613b7aaf023607e8a1f3957b78a816e2e3a5905 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master And add (and default to) 6.0 to linux-headers. Signed-off-by: Peter Korsgaard --- linux/linux.hash | 2 ++ package/linux-headers/Config.in.host | 13 +++++++++++-- toolchain/Config.in | 5 +++++ .../toolchain-external-custom/Config.in.options | 6 +++++- 4 files changed, 23 insertions(+), 3 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index 9e75877be9..dde8e5c54c 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,3 +1,5 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 856c7fd7b1..4847cd4c87 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_LINUX_HEADERS choice prompt "Kernel Headers" default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL - default BR2_KERNEL_HEADERS_5_19 + default BR2_KERNEL_HEADERS_6_0 help Select the kernel version to get headers from. @@ -60,6 +60,10 @@ config BR2_KERNEL_HEADERS_5_17 config BR2_KERNEL_HEADERS_5_19 bool "Linux 5.19.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 + +config BR2_KERNEL_HEADERS_6_0 + bool "Linux 6.0.x kernel headers" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 select BR2_KERNEL_HEADERS_LATEST config BR2_KERNEL_HEADERS_VERSION @@ -137,8 +141,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0 + bool "6.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19 - bool "5.19.x or later" + bool "5.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18 @@ -396,6 +404,7 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.15.67" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default "5.19.13" if BR2_KERNEL_HEADERS_5_19 + default "6.0" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ diff --git a/toolchain/Config.in b/toolchain/Config.in index 0801a3c516..23596d6c85 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -575,6 +575,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -588,6 +592,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.0" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 default "5.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 default "5.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_18 default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options index 494e67516f..a9cb61365f 100644 --- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options @@ -127,8 +127,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_0 + bool "6.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_19 - bool "5.19.x or later" + bool "5.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 From peter at korsgaard.com Thu Oct 6 17:53:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:44 +0200 Subject: [Buildroot] [git commit] linux: bump _KERNEL_LATEST_VERSION to 6.0 Message-ID: <20221006175949.2700186934@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=374e39b6344246b94d58750bcf20f3f61f8e9078 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- linux/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index de9bf0ad7a..029976569e 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -28,8 +28,8 @@ choice prompt "Kernel version" config BR2_LINUX_KERNEL_LATEST_VERSION - bool "Latest version (5.17)" - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 if BR2_KERNEL_HEADERS_AS_KERNEL + bool "Latest version (6.0)" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION bool "Latest CIP SLTS version (5.10.115-cip7)" @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "5.17.15" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ From peter at korsgaard.com Thu Oct 6 17:55:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:55:21 +0200 Subject: [Buildroot] [git commit] linux: update cip/cip-rt kernels to version 5.10.145-cip17 Message-ID: <20221006175949.6AB3686936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=baca1e12baaf3ecd06dbfe3a74c8f2883099b955 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Peter Korsgaard --- linux/Config.in | 8 ++++---- linux/linux.hash | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index 029976569e..f9caa3c652 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -32,7 +32,7 @@ config BR2_LINUX_KERNEL_LATEST_VERSION select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_0 if BR2_KERNEL_HEADERS_AS_KERNEL config BR2_LINUX_KERNEL_LATEST_CIP_VERSION - bool "Latest CIP SLTS version (5.10.115-cip7)" + bool "Latest CIP SLTS version (5.10.145-cip17)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help CIP launched in the spring of 2016 to address the needs of @@ -52,7 +52,7 @@ config BR2_LINUX_KERNEL_LATEST_CIP_VERSION https://www.cip-project.org config BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION - bool "Latest CIP RT SLTS version (5.10.109-cip5-rt4)" + bool "Latest CIP RT SLTS version (5.10.145-cip17-rt7)" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10 if BR2_KERNEL_HEADERS_AS_KERNEL help Same as the CIP version, but this is the PREEMPT_RT realtime @@ -129,8 +129,8 @@ endif config BR2_LINUX_KERNEL_VERSION string default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION - default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION - default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION + default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION + default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ if BR2_LINUX_KERNEL_CUSTOM_VERSION default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL diff --git a/linux/linux.hash b/linux/linux.hash index dde8e5c54c..07963f185e 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -11,8 +11,8 @@ sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux- sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz # Locally computed -sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz -sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz +sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz +sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz # Licenses hashes sha256 fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0 COPYING From peter at korsgaard.com Thu Oct 6 17:54:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:00 +0200 Subject: [Buildroot] [git commit] mender_x86_64_efi_defconfig: specify 5.18 kernel headers Message-ID: <20221006175949.441A586937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b35597decbef4a26dcb662028357d2ac51b0978f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfig uses a 5.18.4 kernel, so specify 5.18 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/mender_x86_64_efi_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 6919a60c90..2ec6f6f76c 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -2,7 +2,7 @@ BR2_x86_64=y # Toolchain -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18=y # System BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" From peter at korsgaard.com Thu Oct 6 17:54:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:13 +0200 Subject: [Buildroot] [git commit] qemu_riscv64_nommu_virt_defconfig: specify kernel headers version Message-ID: <20221006175949.583588680C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=61c8dfe7d7090c004a3d766f8a2473141ce676f9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs uses a 5.19 kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/qemu_riscv64_nommu_virt_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/qemu_riscv64_nommu_virt_defconfig b/configs/qemu_riscv64_nommu_virt_defconfig index 5fab255d88..ee70beb208 100644 --- a/configs/qemu_riscv64_nommu_virt_defconfig +++ b/configs/qemu_riscv64_nommu_virt_defconfig @@ -3,6 +3,9 @@ BR2_riscv=y BR2_RISCV_64=y # BR2_RISCV_USE_MMU is not set +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Busybox with hush BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config" From peter at korsgaard.com Thu Oct 6 17:53:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:55 +0200 Subject: [Buildroot] [git commit] nezha_defconfig: specify 5.19 kernel headers Message-ID: <20221006175949.3B2C986936@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aafab85b07bb2361e826119b11cd021d409d01e0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfig uses a 5.19-rc1 based kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard --- configs/nezha_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/nezha_defconfig b/configs/nezha_defconfig index 2e2df3c09d..5d0948a013 100644 --- a/configs/nezha_defconfig +++ b/configs/nezha_defconfig @@ -1,6 +1,6 @@ BR2_riscv=y BR2_GLOBAL_PATCH_DIR="board/nezha/patches" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_OVERLAY="board/nezha/overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" From peter at korsgaard.com Thu Oct 6 17:54:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:19 +0200 Subject: [Buildroot] [git commit] friendlyarm_nanopi_r2s_defconfig: specify kernel headers version Message-ID: <20221006175949.600078693A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2a012d68972e6762cb0ab8be531d66657fe102a9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs uses a 5.16 kernel, so specify 5.16 kernel headers to match. Signed-off-by: Peter Korsgaard --- configs/friendlyarm_nanopi_r2s_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig index ce252a5d76..284b28ec31 100644 --- a/configs/friendlyarm_nanopi_r2s_defconfig +++ b/configs/friendlyarm_nanopi_r2s_defconfig @@ -1,6 +1,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" From peter at korsgaard.com Thu Oct 6 17:58:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:58:54 +0200 Subject: [Buildroot] [git commit] package/acpica: fix legal-info Message-ID: <20221006175949.851F68680C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1a2baba96255f73c1c87e2d59cfbb13d3203ee5c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since the bump to version 20220331, the license file is changed as it was updated to the new release year. Fixes: http://autobuild.buildroot.net/results/93ad774a7f69e761952a3a6c92a24de7506e6312/ Signed-off-by: Erico Nunes Signed-off-by: Peter Korsgaard --- package/acpica/acpica.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/acpica/acpica.hash b/package/acpica/acpica.hash index 4b6981c602..564e393cb4 100644 --- a/package/acpica/acpica.hash +++ b/package/acpica/acpica.hash @@ -1,3 +1,3 @@ # locally computed hash sha256 1ccda5c6a08a90b145777df635eb09f995b3472b3128f375009c5a6b01a04c7a acpica-unix2-20220331.tar.gz -sha256 c7c5facde0edec64ce403043082a4b288543b9a120d86a23bba3be7585e021aa source/include/acpi.h +sha256 40d8e351f8dfdf5340ec76ac28f0c201b825077d7060bb3686ca1112cb26985d source/include/acpi.h From peter at korsgaard.com Thu Oct 6 17:58:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:58:03 +0200 Subject: [Buildroot] [git commit] package/htpdate: bump to version 1.3.6 Message-ID: <20221006175949.7C5A786938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=30d6b73271de85ba50a7f59fb2cb6c0c0d9f0057 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Peter Korsgaard --- package/htpdate/htpdate.hash | 2 +- package/htpdate/htpdate.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/htpdate/htpdate.hash b/package/htpdate/htpdate.hash index d5426c6d08..f572fb1e84 100644 --- a/package/htpdate/htpdate.hash +++ b/package/htpdate/htpdate.hash @@ -1,3 +1,3 @@ # Locally calculated: -sha256 a8734d4f1d84d0608d045508608f2d29d8b968da269f83120aaac67709b1bd03 htpdate-1.3.5.tar.gz +sha256 3cdc558ec8e53ef374a42490b2f28c0b23981fa8754a6d7182044707828ad1e9 htpdate-1.3.6.tar.gz sha256 7989949df09a0489434723c571541604cd3f2e0418c6a6aa9179bfaf8ec807cc LICENSE diff --git a/package/htpdate/htpdate.mk b/package/htpdate/htpdate.mk index cf47ee5451..2d4a11dd9d 100644 --- a/package/htpdate/htpdate.mk +++ b/package/htpdate/htpdate.mk @@ -4,7 +4,7 @@ # ################################################################################ -HTPDATE_VERSION = 1.3.5 +HTPDATE_VERSION = 1.3.6 HTPDATE_SITE = $(call github,twekkel,htpdate,v$(HTPDATE_VERSION)) HTPDATE_LICENSE = GPL-2.0+ HTPDATE_LICENSE_FILES = LICENSE From peter at korsgaard.com Thu Oct 6 17:57:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:57:02 +0200 Subject: [Buildroot] [git commit] package/darkhttpd: security bump to version 1.14 Message-ID: <20221006175949.73B0D86937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cced5b68acba02abfd72f66264faed60f4bfd65a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From peter at korsgaard.com Thu Oct 6 17:53:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:53:49 +0200 Subject: [Buildroot] [git commit] package/linux-headers: drop 5.17.x option Message-ID: <20221006175949.331908693A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9647bf80a9375f508cdc0f32307e64071b9e0b74 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The 5.17.x series is now EOL upstream, so drop the linux-headers option and add legacy handling for it. Signed-off-by: Peter Korsgaard --- Config.in.legacy | 7 +++++++ package/linux-headers/Config.in.host | 5 ----- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 93d921160a..0e63d59a98 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,13 @@ endif comment "Legacy options removed in 2022.11" +config BR2_KERNEL_HEADERS_5_17 + bool "kernel headers version 5.17.x are no longer supported" + select BR2_LEGACY + help + Version 5.17.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + config BR2_iwmmxt bool "ARM iwmmxt variant removed" select BR2_LEGACY diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 4847cd4c87..7aee67de56 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -53,10 +53,6 @@ config BR2_KERNEL_HEADERS_5_15 bool "Linux 5.15.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 -config BR2_KERNEL_HEADERS_5_17 - bool "Linux 5.17.x kernel headers" - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 - config BR2_KERNEL_HEADERS_5_19 bool "Linux 5.19.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_19 @@ -402,7 +398,6 @@ config BR2_DEFAULT_KERNEL_HEADERS default "5.4.212" if BR2_KERNEL_HEADERS_5_4 default "5.10.142" if BR2_KERNEL_HEADERS_5_10 default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default "5.19.13" if BR2_KERNEL_HEADERS_5_19 default "6.0" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION From peter at korsgaard.com Thu Oct 6 17:54:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:54:06 +0200 Subject: [Buildroot] [git commit] configs/{canaan, sipeed_maix}*: specify kernel headers version Message-ID: <20221006175949.4FEE086938@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1bd8e718a683a4af5db7f3aedb66717b45cdf2fc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The defconfigs use a 5.19 kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard Reviewed-by: Damien Le Moal Signed-off-by: Peter Korsgaard --- configs/canaan_kd233_defconfig | 3 +++ configs/sipeed_maix_bit_defconfig | 3 +++ configs/sipeed_maix_bit_sdcard_defconfig | 3 +++ configs/sipeed_maix_dock_defconfig | 3 +++ configs/sipeed_maix_dock_sdcard_defconfig | 3 +++ configs/sipeed_maix_go_defconfig | 3 +++ configs/sipeed_maix_go_sdcard_defconfig | 3 +++ configs/sipeed_maixduino_defconfig | 3 +++ configs/sipeed_maixduino_sdcard_defconfig | 3 +++ 9 files changed, 27 insertions(+) diff --git a/configs/canaan_kd233_defconfig b/configs/canaan_kd233_defconfig index 3aa5dccf08..77b8abf531 100644 --- a/configs/canaan_kd233_defconfig +++ b/configs/canaan_kd233_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_bit_defconfig b/configs/sipeed_maix_bit_defconfig index d2bac9e0b8..d73ba0266a 100644 --- a/configs/sipeed_maix_bit_defconfig +++ b/configs/sipeed_maix_bit_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index e1c9dc417e..8a19996090 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_dock_defconfig b/configs/sipeed_maix_dock_defconfig index a7f0441e53..ccb563310e 100644 --- a/configs/sipeed_maix_dock_defconfig +++ b/configs/sipeed_maix_dock_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index 6b7f8d9c68..d3d0f405e1 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_go_defconfig b/configs/sipeed_maix_go_defconfig index a68f9d3b72..c3bcf98f81 100644 --- a/configs/sipeed_maix_go_defconfig +++ b/configs/sipeed_maix_go_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index a127872cd8..75300997b8 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maixduino_defconfig b/configs/sipeed_maixduino_defconfig index c52adb5db7..a30596af92 100644 --- a/configs/sipeed_maixduino_defconfig +++ b/configs/sipeed_maixduino_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # Binary format BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index baaa2bc7bb..add9369747 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -10,6 +10,9 @@ BR2_RISCV_ISA_CUSTOM_RVC=y # BR2_RISCV_USE_MMU is not set BR2_RISCV_ABI_LP64D=y +# Linux headers same as kernel, a 5.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y + # System BR2_BINFMT_FLAT=y BR2_BINFMT_FLAT_ONE=y From peter at korsgaard.com Thu Oct 6 18:00:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:00:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/meson: bump to version 0.63.3 In-Reply-To: <20221005232257.2625525-1-james.hilliard1@gmail.com> (James Hilliard's message of "Wed, 5 Oct 2022 17:22:57 -0600") References: <20221005232257.2625525-1-james.hilliard1@gmail.com> Message-ID: <87o7uosuhr.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 18:00:28 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:00:28 +0200 Subject: [Buildroot] [PATCH] package/python-markdown: bump version to 3.4.1 In-Reply-To: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> (Gwenhael Goavec-Merou's message of "Thu, 6 Oct 2022 09:33:51 +0200") References: <1665041631-78788-1-git-send-email-gwenj@trabucayre.com> Message-ID: <87k05csugz.fsf@dell.be.48ers.dk> >>>>> "Gwenhael" == Gwenhael Goavec-Merou writes: > From: Gwenhael Goavec-Merou > Signed-off-by: Gwenhael Goavec-Merou Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 17:59:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 19:59:57 +0200 Subject: [Buildroot] [git commit] package/meson: bump to version 0.63.3 Message-ID: <20221006180142.E21EA86948@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ee62626e161298854e5cbebb02e07a59abee379a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING From peter at korsgaard.com Thu Oct 6 18:00:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 20:00:18 +0200 Subject: [Buildroot] [git commit] package/python-markdown: bump version to 3.4.1 Message-ID: <20221006180142.EB3ED8694A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=daa5ff9658055a38ee5e224d312d8be17ff82606 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Peter Korsgaard --- package/python-markdown/python-markdown.hash | 4 ++-- package/python-markdown/python-markdown.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-markdown/python-markdown.hash b/package/python-markdown/python-markdown.hash index b64ac77be0..66208067cc 100644 --- a/package/python-markdown/python-markdown.hash +++ b/package/python-markdown/python-markdown.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/markdown/json -md5 b6833c6326e9164ee0c662218a75e7f0 Markdown-3.3.4.tar.gz -sha256 31b5b491868dcc87d6c24b7e3d19a0d730d59d3e46f4eea6430a321bed387a49 Markdown-3.3.4.tar.gz +md5 597656cf4feadf1998b0511201620202 Markdown-3.4.1.tar.gz +sha256 3b809086bb6efad416156e00a0da66fe47618a5d6918dd688f53f40c8e4cfeff Markdown-3.4.1.tar.gz # Locally computed sha256 sha256 6f1193cb634718e65c3a537d6e25ebd614820ec0ef693cfc12248112638d64da LICENSE.md diff --git a/package/python-markdown/python-markdown.mk b/package/python-markdown/python-markdown.mk index 801360d778..1b9b556201 100644 --- a/package/python-markdown/python-markdown.mk +++ b/package/python-markdown/python-markdown.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MARKDOWN_VERSION = 3.3.4 +PYTHON_MARKDOWN_VERSION = 3.4.1 PYTHON_MARKDOWN_SOURCE = Markdown-$(PYTHON_MARKDOWN_VERSION).tar.gz -PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/49/02/37bd82ae255bb4dfef97a4b32d95906187b7a7a74970761fca1360c4ba22 +PYTHON_MARKDOWN_SITE = https://files.pythonhosted.org/packages/85/7e/133e943e97a943d2f1d8bae0c5060f8ac50e6691754eb9dbe036b047a9bb PYTHON_MARKDOWN_LICENSE = BSD-3-Clause PYTHON_MARKDOWN_LICENSE_FILES = LICENSE.md PYTHON_MARKDOWN_SETUP_TYPE = setuptools From peter at korsgaard.com Thu Oct 6 18:02:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 06 Oct 2022 20:02:06 +0200 Subject: [Buildroot] [PATCH 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221004133057.2003750-2-aperez@igalia.com> (Adrian Perez de Castro's message of "Tue, 4 Oct 2022 16:30:53 +0300") References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-2-aperez@igalia.com> Message-ID: <87fsg0sue9.fsf@dell.be.48ers.dk> >>>>> "Adrian" == Adrian Perez de Castro writes: > Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. > Release notes: > https://wpewebkit.org/release/wpewebkit-2.36.8.html > Accompanying security advisory: > https://wpewebkit.org/security/WSA-2022-0009.html > This also imports a build fix for ARM NEON targets. > Signed-off-by: Adrian Perez de Castro Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Thu Oct 6 18:00:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 6 Oct 2022 20:00:58 +0200 Subject: [Buildroot] [git commit] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221006180323.722C986955@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fc523deaf9e2e83a69ef54a2eee965e3b618a758 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Thu Oct 6 18:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:45:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6: bump to version 6.4.0 In-Reply-To: <20221004093649.31017-1-jesseevg@gmail.com> References: <20221004093649.31017-1-jesseevg@gmail.com> Message-ID: <20221006204525.68e10713@windsurf> On Tue, 4 Oct 2022 11:36:49 +0200 Jesse Van Gavere wrote: > Drop the qsimd_p.h fix, this has been fixed upstream since 6.3.2/6.4.0 > > Signed-off-by: Jesse Van Gavere > --- > package/qt6/qt6.mk | 4 +- > ...al-qsimd_p.h-fix-build-on-ARM-v7-due.patch | 49 ------------------- > package/qt6/qt6base/qt6base.hash | 4 +- > package/qt6/qt6serialport/qt6serialport.hash | 4 +- > 4 files changed, 6 insertions(+), 55 deletions(-) > delete mode 100644 package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:46:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:46:12 +0200 Subject: [Buildroot] [git commit] support/testing/tests/package/test_zfs: increase timeout for the ZFS tests Message-ID: <20221006184636.034EE869A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1b77c2170d052e0b66ea132365c4c6747ca1cf7a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Newest versions requires a bit more time to finish. Signed-off-by: Jos?? Luis Salvador Rufo Signed-off-by: Thomas Petazzoni --- support/testing/tests/package/test_zfs.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_zfs.py b/support/testing/tests/package/test_zfs.py index 688b60d7c4..1f01ddd768 100644 --- a/support/testing/tests/package/test_zfs.py +++ b/support/testing/tests/package/test_zfs.py @@ -4,6 +4,7 @@ import infra.basetest class TestZfsBase(infra.basetest.BRTest): + timeout = 60 * 3 config = \ """ BR2_x86_64=y @@ -57,7 +58,7 @@ class TestZfsBase(infra.basetest.BRTest): "arc_summary", ] for cmd in cmds: - self.assertRunOk(cmd) + self.assertRunOk(cmd, timeout=self.timeout) class TestZfsGlibc(TestZfsBase): From thomas.petazzoni at bootlin.com Thu Oct 6 18:43:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:43:25 +0200 Subject: [Buildroot] [git commit] package/zfs: bump version to 2.1.6 Message-ID: <20221006184635.EE7DD869A5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9a0a0843e419a2842c1377217d7e2ac9c47d416 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Jos?? Luis Salvador Rufo Signed-off-by: Thomas Petazzoni --- package/zfs/zfs.hash | 4 ++-- package/zfs/zfs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/zfs/zfs.hash b/package/zfs/zfs.hash index 411af974c6..b73fc3b703 100644 --- a/package/zfs/zfs.hash +++ b/package/zfs/zfs.hash @@ -1,5 +1,5 @@ -# From https://github.com/openzfs/zfs/releases/download/zfs-2.1.4/zfs-2.1.4.sha256.asc -sha256 3b52c0d493f806f638dca87dde809f53861cd318c1ebb0e60daeaa061cf1acf6 zfs-2.1.4.tar.gz +# From https://github.com/openzfs/zfs/releases/download/zfs-2.1.6/zfs-2.1.6.sha256.asc +sha256 15339014f8d2131348eb937bf8893849806b6d2645ea607a18c7f117749dbd7a zfs-2.1.6.tar.gz sha256 96a27353fe717ff2c8b95deb8b009c4eb750303c6400e2d8a2582ab1ec12b25a bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch # Hash for license files: diff --git a/package/zfs/zfs.mk b/package/zfs/zfs.mk index 900a72f997..f7e673c23f 100644 --- a/package/zfs/zfs.mk +++ b/package/zfs/zfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZFS_VERSION = 2.1.4 +ZFS_VERSION = 2.1.6 ZFS_SITE = https://github.com/openzfs/zfs/releases/download/zfs-$(ZFS_VERSION) ZFS_PATCH = https://github.com/openzfs/zfs/commit/bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch ZFS_LICENSE = CDDL From thomas.petazzoni at bootlin.com Thu Oct 6 18:42:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:42:50 +0200 Subject: [Buildroot] [git commit] package/qt6: bump to version 6.4.0 Message-ID: <20221006184635.E47D6869A3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=343974b99528702842e8c1dad945fcd4f0defd6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop the qsimd_p.h fix, this has been fixed upstream since 6.3.2/6.4.0 Signed-off-by: Jesse Van Gavere Signed-off-by: Thomas Petazzoni --- package/qt6/qt6.mk | 4 +- ...-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch | 49 ---------------------- package/qt6/qt6base/qt6base.hash | 4 +- package/qt6/qt6serialport/qt6serialport.hash | 4 +- 4 files changed, 6 insertions(+), 55 deletions(-) diff --git a/package/qt6/qt6.mk b/package/qt6/qt6.mk index b609baf4c6..575b2f826c 100644 --- a/package/qt6/qt6.mk +++ b/package/qt6/qt6.mk @@ -4,8 +4,8 @@ # ################################################################################ -QT6_VERSION_MAJOR = 6.3 -QT6_VERSION = $(QT6_VERSION_MAJOR).2 +QT6_VERSION_MAJOR = 6.4 +QT6_VERSION = $(QT6_VERSION_MAJOR).0 QT6_SOURCE_TARBALL_PREFIX = everywhere-src QT6_SITE = https://download.qt.io/archive/qt/$(QT6_VERSION_MAJOR)/$(QT6_VERSION)/submodules diff --git a/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch b/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch deleted file mode 100644 index 1097a79922..0000000000 --- a/package/qt6/qt6base/0001-src-corelib-global-qsimd_p.h-fix-build-on-ARM-v7-due.patch +++ /dev/null @@ -1,49 +0,0 @@ -From d69db2ba3ce47f6eded0a8843c413a67d26e6375 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 24 Jul 2022 20:37:51 +0200 -Subject: [PATCH] src/corelib/global/qsimd_p.h: fix build on ARM < v7 due to - yield instruction - -On ARM < v7 with gcc, the build fails with: - -/tmp/ccRlrCQi.s: Assembler messages: -/tmp/ccRlrCQi.s:3858: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:3875: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:4606: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:4853: Error: selected processor does not support `yield' in ARM mode -/tmp/ccRlrCQi.s:5268: Error: selected processor does not support `yield' in ARM mode - -while building src/corelib/thread/qfutureinterface.cpp. - -This is due to the fact that the qYieldCpu() macro on ARM, assumes -that if the compiler is gcc, we can do asm volatile("yield"). However, -this instruction is only guaranteed to exist on ARMv7+ cores. It -doesn't exist on ARMv5, and only some (but not all) ARMv6 cores have -it. If it's not available, we just fallback to the default behavior of -qYieldCpu(), which is to do nothing. - -Signed-off-by: Thomas Petazzoni -Upstream bug: https://bugreports.qt.io/browse/QTBUG-105162 ---- - src/corelib/global/qsimd_p.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/corelib/global/qsimd_p.h b/src/corelib/global/qsimd_p.h -index d270d09f2f..b84b257e54 100644 ---- a/src/corelib/global/qsimd_p.h -+++ b/src/corelib/global/qsimd_p.h -@@ -428,7 +428,10 @@ static inline void qYieldCpu() - https://stackoverflow.com/a/70076751/134841 - https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105416 - */ -- asm volatile("yield"); /* this works everywhere */ -+# if defined(Q_PROCESSOR_ARM_V7) -+ /* The yield instruction appeared in ARMv7 */ -+ asm volatile("yield"); -+# endif - # else - __yield(); /* this is what should work everywhere */ - # endif --- -2.37.1 - diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index e43a6ff52d..5dd26973fa 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -1,5 +1,5 @@ -# Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.2/submodules/qtbase-everywhere-src-6.3.2.tar.xz.sha256 -sha256 7929ba4df870b6b30870bc0aed2525cfc606ed7091107b23cf7ed7e434caa9a6 qtbase-everywhere-src-6.3.2.tar.xz +# Hash from: https://download.qt.io/official_releases/qt/6.4/6.4.0/submodules/qtbase-everywhere-src-6.4.0.tar.xz.sha256 +sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index 50202a1e26..fb1b3dcf6b 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -1,5 +1,5 @@ -# Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.1/submodules/qtserialport-everywhere-src-6.3.1.tar.xz.sha256 -sha256 c7d207322367c63647edbd06ded9c76ba9071961daac1d1021b622b762c35e6f qtserialport-everywhere-src-6.3.2.tar.xz +# Hash from: https://download.qt.io/official_releases/qt/6.4/6.4.0/submodules/qtserialport-everywhere-src-6.4.0.tar.xz.sha256 +sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 From thomas.petazzoni at bootlin.com Thu Oct 6 18:46:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:46:55 +0200 Subject: [Buildroot] [PATCH 1/2] package/zfs: bump version to 2.1.6 In-Reply-To: <20221004011034.1283650-1-salvador.joseluis@gmail.com> References: <20221004011034.1283650-1-salvador.joseluis@gmail.com> Message-ID: <20221006204655.32feb76e@windsurf> On Tue, 4 Oct 2022 03:10:34 +0200 Jos? Luis Salvador Rufo wrote: > Signed-off-by: Jos? Luis Salvador Rufo > --- > package/zfs/zfs.hash | 2 +- > package/zfs/zfs.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Both applied to master, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:47:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:47:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnuplot: bump version to 5.4.5 In-Reply-To: <20221004073233.1665-1-mf@go-sys.de> References: <20221004073233.1665-1-mf@go-sys.de> Message-ID: <20221006204729.54665188@windsurf> On Tue, 4 Oct 2022 09:32:33 +0200 Michael Fischer wrote: > Signed-off-by: Michael Fischer > --- > package/gnuplot/gnuplot.hash | 8 ++++---- > package/gnuplot/gnuplot.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From bugzilla at busybox.net Thu Oct 6 18:48:09 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 06 Oct 2022 18:48:09 +0000 Subject: [Buildroot] [Bug 15026] package/udisks: install to staging In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15026 --- Comment #2 from Thomas Petazzoni --- If you post the patch to the mailing list, could you be a bit more specific in the commit log as to why installation to staging is useful for this package? Normally, installation to staging is relevant when the package installs a library. Thanks a lot! -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:26 +0200 Subject: [Buildroot] [PATCH] package/sysdig: bump to version 0.29.3 In-Reply-To: <20221003203104.3384703-1-angelo@amarulasolutions.com> References: <20221003203104.3384703-1-angelo@amarulasolutions.com> Message-ID: <20221006210426.1fc44cf9@windsurf> On Mon, 3 Oct 2022 22:31:04 +0200 Angelo Compagnucci wrote: > Signed-off-by: Angelo Compagnucci > --- > package/sysdig/sysdig.hash | 2 +- > package/sysdig/sysdig.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:33 +0200 Subject: [Buildroot] [PATCH] package/python-pydal: bump to version 20220814.1 In-Reply-To: <20221003151207.3250577-1-angelo@amarulasolutions.com> References: <20221003151207.3250577-1-angelo@amarulasolutions.com> Message-ID: <20221006210433.51ec7a62@windsurf> On Mon, 3 Oct 2022 17:12:07 +0200 Angelo Compagnucci wrote: > Signed-off-by: Angelo Compagnucci > --- > package/python-pydal/python-pydal.hash | 2 +- > package/python-pydal/python-pydal.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:04:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:04:40 +0200 Subject: [Buildroot] [PATCH] package/grep: bump to version 3.8 In-Reply-To: <20221003150609.3235085-1-angelo@amarulasolutions.com> References: <20221003150609.3235085-1-angelo@amarulasolutions.com> Message-ID: <20221006210440.1d3158a0@windsurf> On Mon, 3 Oct 2022 17:06:09 +0200 Angelo Compagnucci wrote: > * Updated to the new PCRE2 dependency > * Removed unneeded patches (file m4/stack-direction.m4 is not there) > * Removed autoreconf step because unnecessary after not patching m4 > anymore > > Signed-off-by: Angelo Compagnucci > --- > ...01-sigsegv-fix-build-on-microblazeel.patch | 32 ------------------- > .../grep/0002-sigsegv-fix-build-on-or1k.patch | 32 ------------------- > package/grep/grep.hash | 4 +-- > package/grep/grep.mk | 8 ++--- > 4 files changed, 5 insertions(+), 71 deletions(-) > delete mode 100644 package/grep/0001-sigsegv-fix-build-on-microblazeel.patch > delete mode 100644 package/grep/0002-sigsegv-fix-build-on-or1k.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:20 +0200 Subject: [Buildroot] [git commit] package/sysdig: bump to version 0.29.3 Message-ID: <20221006190452.33D48869ED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08792a60df80a1147ee78bb108f8186996bf0c77 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/sysdig/sysdig.hash | 2 +- package/sysdig/sysdig.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sysdig/sysdig.hash b/package/sysdig/sysdig.hash index c953421f27..cda3de5e7c 100644 --- a/package/sysdig/sysdig.hash +++ b/package/sysdig/sysdig.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 38ea602085f706af5d07630189216fa240064122650a81456cb092579313ae8e sysdig-0.29.2.tar.gz +sha256 6b96797859002ab69a2bed4fdba1c7fe8064ecf8661621ae7d8fbf8599ffa636 sysdig-0.29.3.tar.gz sha256 a88fbf820b38b1c7fabc6efe291b8259e02ae21326f56fe31c6c9adf374b2702 COPYING diff --git a/package/sysdig/sysdig.mk b/package/sysdig/sysdig.mk index e9968d9fde..bafe534a16 100644 --- a/package/sysdig/sysdig.mk +++ b/package/sysdig/sysdig.mk @@ -4,7 +4,7 @@ # ################################################################################ -SYSDIG_VERSION = 0.29.2 +SYSDIG_VERSION = 0.29.3 SYSDIG_SITE = $(call github,draios,sysdig,$(SYSDIG_VERSION)) SYSDIG_LICENSE = Apache-2.0 SYSDIG_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:25 +0200 Subject: [Buildroot] [git commit] package/python-pydal: bump to version 20220814.1 Message-ID: <20221006190452.3CC99869EF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d33c87b87372fc162c69be4fb96c4038dbc31c52 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/python-pydal/python-pydal.hash | 2 +- package/python-pydal/python-pydal.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/python-pydal/python-pydal.hash b/package/python-pydal/python-pydal.hash index 9366708a7d..2a712e26c9 100644 --- a/package/python-pydal/python-pydal.hash +++ b/package/python-pydal/python-pydal.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 7891bd35d57b850efdbbe1f2d46cb1daf8c991c912a99e211ab87a30e7685781 python-pydal-20220609.1.tar.gz +sha256 e4bde1955c2d15cae07349275cda48fa61a46dd51562717c2f0f1374dd459547 python-pydal-20220814.1.tar.gz sha256 1f711e93f1e0c2eec576e2e60597dc2ed6f0a661e4749c6b8a39f0d4a72be468 LICENSE.txt diff --git a/package/python-pydal/python-pydal.mk b/package/python-pydal/python-pydal.mk index 2990051351..89c3f14726 100644 --- a/package/python-pydal/python-pydal.mk +++ b/package/python-pydal/python-pydal.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_PYDAL_VERSION = 20220609.1 +PYTHON_PYDAL_VERSION = 20220814.1 PYTHON_PYDAL_SITE = $(call github,web2py,pydal,v$(PYTHON_PYDAL_VERSION)) PYTHON_PYDAL_LICENSE = BSD-3-Clause PYTHON_PYDAL_LICENSE_FILES = LICENSE.txt From thomas.petazzoni at bootlin.com Thu Oct 6 18:53:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:53:51 +0200 Subject: [Buildroot] [git commit] package/grep: bump to version 3.8 Message-ID: <20221006190452.45FB18699F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d1ed333dfe9c859645a44a5d9c909a8692bb8015 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master * Updated to the new PCRE2 dependency * Removed unneeded patches (file m4/stack-direction.m4 is not there) * Removed autoreconf step because unnecessary after not patching m4 anymore Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- .../0001-sigsegv-fix-build-on-microblazeel.patch | 32 ---------------------- package/grep/0002-sigsegv-fix-build-on-or1k.patch | 32 ---------------------- package/grep/grep.hash | 4 +-- package/grep/grep.mk | 8 ++---- 4 files changed, 5 insertions(+), 71 deletions(-) diff --git a/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch b/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch deleted file mode 100644 index 06869b716e..0000000000 --- a/package/grep/0001-sigsegv-fix-build-on-microblazeel.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 3079cea1b18fe72aa1da6b04e561abfb36f4f443 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 11 Nov 2021 09:57:23 +0100 -Subject: sigsegv: fix build on microblazeel - -Fix the following build failure on microblazeel with diffutils 3.8: -sigsegv.c:979:28: error: 'struct vma_struct' has no member named 'is_near_this' -http://autobuild.buildroot.org/results/5ecd55b7c72f9630a7acc72341ccb60e94ddb574 - -[Retrieved from: -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=3079cea1b18fe72aa1da6b04e561abfb36f4f443] -Signed-off-by: Fabrice Fontaine ---- - m4/stack-direction.m4 | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/m4/stack-direction.m4 b/m4/stack-direction.m4 -index c90d69733..70286c8f5 100644 ---- a/m4/stack-direction.m4 -+++ b/m4/stack-direction.m4 -@@ -37,7 +37,7 @@ AC_DEFUN([SV_STACK_DIRECTION], - m68* | \ - m88k | \ - mcore | \ -- microblaze | \ -+ microblaze* | \ - mips* | \ - mmix | \ - mn10200 | \ --- -cgit v1.2.1 - diff --git a/package/grep/0002-sigsegv-fix-build-on-or1k.patch b/package/grep/0002-sigsegv-fix-build-on-or1k.patch deleted file mode 100644 index 73385fe9f7..0000000000 --- a/package/grep/0002-sigsegv-fix-build-on-or1k.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 496c1740e5475be85b65fdb2b143771f09ed27cb Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 11 Nov 2021 10:06:31 +0100 -Subject: sigsegv: fix build on or1k - -Fix the following build failure on or1k with diffutils 3.8 -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=e54aa6196947ed22ff66bcd714e4fc7bd0c5c3b4 -sigsegv.c:979:28: error: 'struct vma_struct' has no member named 'is_near_this' -http://autobuild.buildroot.org/results/5427e52489d29ed4f18b4a70b3c36f0f7bb0ddd9 - -[Retrieved from: -https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=496c1740e5475be85b65fdb2b143771f09ed27cb] -Signed-off-by: Fabrice Fontaine ---- - m4/stack-direction.m4 | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/m4/stack-direction.m4 b/m4/stack-direction.m4 -index 70286c8f5..29e398d77 100644 ---- a/m4/stack-direction.m4 -+++ b/m4/stack-direction.m4 -@@ -45,6 +45,7 @@ AC_DEFUN([SV_STACK_DIRECTION], - nios2 | \ - nds32* | \ - ns32k | \ -+ or1k | \ - pdp11 | \ - pj* | \ - powerpc* | rs6000 | \ --- -cgit v1.2.1 - diff --git a/package/grep/grep.hash b/package/grep/grep.hash index 29d9eb1cd6..6f3bca89ad 100644 --- a/package/grep/grep.hash +++ b/package/grep/grep.hash @@ -1,5 +1,5 @@ # Locally calculated after checking signature -# http://ftp.gnu.org/gnu/grep/grep-3.7.tar.xz.sig +# http://ftp.gnu.org/gnu/grep/grep-3.8.tar.xz.sig # using key 155D3FC500C834486D1EEA677FD9FCCB000BEEEE -sha256 5c10da312460aec721984d5d83246d24520ec438dd48d7ab5a05dbc0d6d6823c grep-3.7.tar.xz +sha256 498d7cc1b4fb081904d87343febb73475cf771e424fb7e6141aff66013abc382 grep-3.8.tar.xz sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/grep/grep.mk b/package/grep/grep.mk index a485f23dc7..318e00940d 100644 --- a/package/grep/grep.mk +++ b/package/grep/grep.mk @@ -4,14 +4,12 @@ # ################################################################################ -GREP_VERSION = 3.7 +GREP_VERSION = 3.8 GREP_SITE = $(BR2_GNU_MIRROR)/grep GREP_SOURCE = grep-$(GREP_VERSION).tar.xz GREP_LICENSE = GPL-3.0+ GREP_LICENSE_FILES = COPYING GREP_CPE_ID_VENDOR = gnu -# We're patching m4/stack-direction.m4 -GREP_AUTORECONF = YES GREP_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES) # install into /bin like busybox grep GREP_CONF_OPTS = --exec-prefix=/ @@ -40,9 +38,9 @@ GREP_DEPENDENCIES += libiconv endif # link with pcre if enabled -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) GREP_CONF_OPTS += --enable-perl-regexp -GREP_DEPENDENCIES += pcre +GREP_DEPENDENCIES += pcre2 else GREP_CONF_OPTS += --disable-perl-regexp endif From thomas.petazzoni at bootlin.com Thu Oct 6 18:47:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 20:47:01 +0200 Subject: [Buildroot] [git commit] package/gnuplot: bump version to 5.4.5 Message-ID: <20221006190452.2B1CE869EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=164bf2158ed97f09d932ae847ca3c7c25cf0f6d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Fischer Signed-off-by: Thomas Petazzoni --- package/gnuplot/gnuplot.hash | 8 ++++---- package/gnuplot/gnuplot.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/gnuplot/gnuplot.hash b/package/gnuplot/gnuplot.hash index 3b6412091a..1ee6b53694 100644 --- a/package/gnuplot/gnuplot.hash +++ b/package/gnuplot/gnuplot.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/gnuplot/files/gnuplot/5.4.4/ -md5 209c6da8693fa15ae1527c832075ef0f gnuplot-5.4.4.tar.gz -sha1 3305bb255d379eaf0b5181a01cb71119cf89c110 gnuplot-5.4.4.tar.gz +# From https://sourceforge.net/projects/gnuplot/files/gnuplot/5.4.5/ +md5 c10cf81faa69d77e255a1dcfc625ba78 gnuplot-5.4.5.tar.gz +sha1 1179a768fd5f585a5dcb6aedea76cfa7a8dd5dfe gnuplot-5.4.5.tar.gz # Locally computed -sha256 372300b7867f5b3538b25fc5d0ac7734af6e3fe0d202b6db926e4369913f0902 gnuplot-5.4.4.tar.gz +sha256 66f679115dd30559e110498fc94d926949d4d370b4999a042e724b8e910ee478 gnuplot-5.4.5.tar.gz sha256 895928ec0735cca1c8cec42656c7e314a065d0242813bb8693c0c1bf61fd4e4d Copyright diff --git a/package/gnuplot/gnuplot.mk b/package/gnuplot/gnuplot.mk index 18c13d5371..1ee49cb6ce 100644 --- a/package/gnuplot/gnuplot.mk +++ b/package/gnuplot/gnuplot.mk @@ -4,7 +4,7 @@ # ################################################################################ -GNUPLOT_VERSION = 5.4.4 +GNUPLOT_VERSION = 5.4.5 GNUPLOT_SITE = http://downloads.sourceforge.net/project/gnuplot/gnuplot/$(GNUPLOT_VERSION) GNUPLOT_LICENSE = gnuplot license (open source) GNUPLOT_LICENSE_FILES = Copyright From thomas.petazzoni at bootlin.com Thu Oct 6 19:36:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:36:56 +0200 Subject: [Buildroot] [PATCH] package/fail2ban: bump to version 1.0.1 In-Reply-To: <20221003144455.3173974-1-angelo@amarulasolutions.com> References: <20221003144455.3173974-1-angelo@amarulasolutions.com> Message-ID: <20221006213656.105db88e@windsurf> On Mon, 3 Oct 2022 16:44:55 +0200 Angelo Compagnucci wrote: > Removing also upstreamed patches. > > Signed-off-by: Angelo Compagnucci > --- > ...-vulnerability-unset-escape-variable.patch | 158 ------------------ > ...with-error-in-fail2ban-setup-command.patch | 67 -------- > package/fail2ban/fail2ban.hash | 2 +- > package/fail2ban/fail2ban.mk | 2 +- > 4 files changed, 2 insertions(+), 227 deletions(-) > delete mode 100644 package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch > delete mode 100644 package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:16 +0200 Subject: [Buildroot] [PATCH] package/cups-filters: bump to version 1.28.16 In-Reply-To: <20221003130331.3074242-1-angelo@amarulasolutions.com> References: <20221003130331.3074242-1-angelo@amarulasolutions.com> Message-ID: <20221006213716.2748d834@windsurf> On Mon, 3 Oct 2022 15:03:31 +0200 Angelo Compagnucci wrote: > Handling the newly added libexif configure option. > > Signed-off-by: Angelo Compagnucci > --- > package/cups-filters/cups-filters.hash | 2 +- > package/cups-filters/cups-filters.mk | 10 +++++++++- > 2 files changed, 10 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:34 +0200 Subject: [Buildroot] [git commit] package/liburiparser: bump to version 0.9.7 Message-ID: <20221006194115.9617F86A2B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4002e402d305176f443d3076f8802c7791992efb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/liburiparser/liburiparser.hash | 2 +- package/liburiparser/liburiparser.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/liburiparser/liburiparser.hash b/package/liburiparser/liburiparser.hash index 8b40807541..73b4ec6867 100644 --- a/package/liburiparser/liburiparser.hash +++ b/package/liburiparser/liburiparser.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a288a06668528c19e85e38c508335938e1de6fdd4b8f2072401b4533fcebf644 uriparser-0.9.6.tar.xz +sha256 1ddae35cb3cc2c36e8199829d46f1c7f8b222e74a723fdae67ec8561e1ac5a39 uriparser-0.9.7.tar.xz sha256 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3 COPYING diff --git a/package/liburiparser/liburiparser.mk b/package/liburiparser/liburiparser.mk index c9903bd74f..6d25b1d9bb 100644 --- a/package/liburiparser/liburiparser.mk +++ b/package/liburiparser/liburiparser.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBURIPARSER_VERSION = 0.9.6 +LIBURIPARSER_VERSION = 0.9.7 LIBURIPARSER_SOURCE = uriparser-$(LIBURIPARSER_VERSION).tar.xz LIBURIPARSER_SITE = https://github.com/uriparser/uriparser/releases/download/uriparser-$(LIBURIPARSER_VERSION) LIBURIPARSER_LICENSE = BSD-3-Clause From thomas.petazzoni at bootlin.com Thu Oct 6 19:37:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:37:54 +0200 Subject: [Buildroot] [git commit] package/mender: bump version to 3.4.0 Message-ID: <20221006194115.9F7A786A2D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c6c8531a79908e79b78718bd1e0f683a33babafe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a year change. Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- package/mender/mender.hash | 6 +++--- package/mender/mender.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/mender/mender.hash b/package/mender/mender.hash index 7fee01cf1a..d563dc534b 100644 --- a/package/mender/mender.hash +++ b/package/mender/mender.hash @@ -1,12 +1,12 @@ # Locally computed: -sha256 9d8b2438e358dacde58c3692bd038ed9938392f1a526c49d919f73a2dff77eee mender-3.3.0.tar.gz +sha256 8a149b11b990beb7620b372023eec28df63cee6a1aa4132e88ecef554f080f72 mender-3.4.0.tar.gz # Vendor licenses # Generated with sed '/^[A-Za-z0-9_]/s/^/sha256 /' LIC_FILES_CHKSUM.sha256 # Apache-2.0 license. sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a vendor/github.com/mendersoftware/mender-artifact/LICENSE +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b vendor/github.com/mendersoftware/mender-artifact/LICENSE sha256 73ba74dfaa520b49a401b5d21459a8523a146f3b7518a833eea5efa85130bf68 vendor/github.com/mendersoftware/openssl/LICENSE sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 vendor/github.com/minio/sha256-simd/LICENSE sha256 8f5d89b47d7a05a199b77b7e0f362dad391d451ebda4ef48ba11c50c071564c7 vendor/github.com/mendersoftware/progressbar/LICENSE @@ -42,4 +42,4 @@ sha256 08eab1118c80885fa1fa6a6dd7303f65a379fcb3733e063d20d1bbc2c76e6fa1 vendor sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 vendor/github.com/bmatsuo/lmdb-go/LICENSE.mdb.md # sha256 of all the vendor licenses combined -sha256 e6d8321e71be932e08b8923fe9e24e06a95c7e74a6b86e6f73696436ae0ea54f LIC_FILES_CHKSUM.sha256 +sha256 93d9db9b43097b174e362ac8f398aa9a37fcdde2974d0567b62bd6d1e0d22037 LIC_FILES_CHKSUM.sha256 diff --git a/package/mender/mender.mk b/package/mender/mender.mk index 5c3c593da6..724295f784 100644 --- a/package/mender/mender.mk +++ b/package/mender/mender.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_VERSION = 3.3.0 +MENDER_VERSION = 3.4.0 MENDER_SITE = $(call github,mendersoftware,mender,$(MENDER_VERSION)) MENDER_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT, OLDAP-2.8 From thomas.petazzoni at bootlin.com Thu Oct 6 19:05:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:05:30 +0200 Subject: [Buildroot] [git commit] package/cups-filters: bump to version 1.28.16 Message-ID: <20221006194115.8D49586A29@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c90810abea1421c1a1bc8db362662a1e7174767c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Handling the newly added libexif configure option. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- package/cups-filters/cups-filters.hash | 2 +- package/cups-filters/cups-filters.mk | 10 +++++++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/package/cups-filters/cups-filters.hash b/package/cups-filters/cups-filters.hash index d05cce3734..b910cdce13 100644 --- a/package/cups-filters/cups-filters.hash +++ b/package/cups-filters/cups-filters.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 614e053404bb833f78e1edf077f7759d27e475a212eb9a3bd3eac2cfec8bb6c1 cups-filters-1.28.15.tar.gz +sha256 0ca77bb820719a040ff003ecb478d0c2ceffc94e8bd1cd03ddb5a199444127ba cups-filters-1.28.16.tar.gz sha256 38192ffdaca98b718f78b2d4abc38bb087f0bbcc9a16d212c98b903b985f900f COPYING diff --git a/package/cups-filters/cups-filters.mk b/package/cups-filters/cups-filters.mk index 976549e65e..7a3c894112 100644 --- a/package/cups-filters/cups-filters.mk +++ b/package/cups-filters/cups-filters.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_FILTERS_VERSION = 1.28.15 +CUPS_FILTERS_VERSION = 1.28.16 CUPS_FILTERS_SITE = http://openprinting.org/download/cups-filters CUPS_FILTERS_LICENSE = GPL-2.0, GPL-2.0+, GPL-3.0, GPL-3.0+, LGPL-2, LGPL-2.1+, MIT, BSD-4-Clause CUPS_FILTERS_LICENSE_FILES = COPYING @@ -73,6 +73,14 @@ else CUPS_FILTERS_CONF_OPTS += --disable-poppler endif +ifeq ($(BR2_PACKAGE_LIBEXIF),y) +CUPS_FILTERS_CONF_OPTS += --enable-exif +CUPS_FILTERS_DEPENDENCIES += libexif +else +CUPS_FILTERS_CONF_OPTS += --disable-exif +endif + + define CUPS_FILTERS_INSTALL_INIT_SYSV $(INSTALL) -D -m 0755 package/cups-filters/S82cups-browsed \ $(TARGET_DIR)/etc/init.d/S82cups-browsed From thomas.petazzoni at bootlin.com Thu Oct 6 19:38:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:38:04 +0200 Subject: [Buildroot] [git commit] package/mender-connect: bump version to 2.1.0 Message-ID: <20221006194115.ADED4869EA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b31acdccef583a3da1d538abc347a5c8467c2598 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- package/mender-connect/mender-connect.hash | 2 +- package/mender-connect/mender-connect.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mender-connect/mender-connect.hash b/package/mender-connect/mender-connect.hash index 46f37f954b..da4ec5fbbd 100644 --- a/package/mender-connect/mender-connect.hash +++ b/package/mender-connect/mender-connect.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 6410bcd76cebd21e9f18fe5768928d67163e4bb2b6ae76d0e20815400d907657 mender-connect-2.0.2.tar.gz +sha256 96b81bb4c72eb8c1756febb94101c0dea5a6d4884591824e61a5f2509cd9ca9b mender-connect-2.1.0.tar.gz sha256 78b3954421ec6499c3f9735b96d52288574ae80c747416a52548d7f526f26e8c LIC_FILES_CHKSUM.sha256 # Vendor licenses diff --git a/package/mender-connect/mender-connect.mk b/package/mender-connect/mender-connect.mk index 1b0285cffc..36ddd5f7db 100644 --- a/package/mender-connect/mender-connect.mk +++ b/package/mender-connect/mender-connect.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_CONNECT_VERSION = 2.0.2 +MENDER_CONNECT_VERSION = 2.1.0 MENDER_CONNECT_SITE = $(call github,mendersoftware,mender-connect,$(MENDER_CONNECT_VERSION)) MENDER_CONNECT_LICENSE = Apache-2.0, BSD-2-Clause, BSD-3-Clause, ISC, MIT From thomas.petazzoni at bootlin.com Thu Oct 6 19:05:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:05:10 +0200 Subject: [Buildroot] [git commit] package/fail2ban: bump to version 1.0.1 Message-ID: <20221006194115.84A5A86A22@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=76853089d561c6d2517bfe87d81f7f1ff4b4b7c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Removing also upstreamed patches. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- ...e-RCE-vulnerability-unset-escape-variable.patch | 158 --------------------- ...ails-with-error-in-fail2ban-setup-command.patch | 67 --------- package/fail2ban/fail2ban.hash | 2 +- package/fail2ban/fail2ban.mk | 2 +- 4 files changed, 2 insertions(+), 227 deletions(-) diff --git a/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch b/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch deleted file mode 100644 index 6d44f41d85..0000000000 --- a/package/fail2ban/0001-fixed-possible-RCE-vulnerability-unset-escape-variable.patch +++ /dev/null @@ -1,158 +0,0 @@ -From 410a6ce5c80dd981c22752da034f2529b5eee844 Mon Sep 17 00:00:00 2001 -From: sebres -Date: Mon, 21 Jun 2021 17:12:53 +0200 -Subject: [PATCH] fixed possible RCE vulnerability, unset escape variable - (default tilde) stops consider "~" char after new-line as composing escape - sequence - -[Retrieved from: -https://github.com/fail2ban/fail2ban/commit/410a6ce5c80dd981c22752da034f2529b5eee844] -Signed-off-by: Fabrice Fontaine ---- - config/action.d/complain.conf | 2 +- - config/action.d/dshield.conf | 2 +- - config/action.d/mail-buffered.conf | 8 ++++---- - config/action.d/mail-whois-lines.conf | 2 +- - config/action.d/mail-whois.conf | 6 +++--- - config/action.d/mail.conf | 6 +++--- - 6 files changed, 13 insertions(+), 13 deletions(-) - -diff --git a/config/action.d/complain.conf b/config/action.d/complain.conf -index 3a5f882c9f..4d73b05859 100644 ---- a/config/action.d/complain.conf -+++ b/config/action.d/complain.conf -@@ -102,7 +102,7 @@ logpath = /dev/null - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Option: mailargs - # Notes.: Additional arguments to mail command. e.g. for standard Unix mail: -diff --git a/config/action.d/dshield.conf b/config/action.d/dshield.conf -index c128bef348..3d5a7a53a9 100644 ---- a/config/action.d/dshield.conf -+++ b/config/action.d/dshield.conf -@@ -179,7 +179,7 @@ tcpflags = - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Option: mailargs - # Notes.: Additional arguments to mail command. e.g. for standard Unix mail: -diff --git a/config/action.d/mail-buffered.conf b/config/action.d/mail-buffered.conf -index 325f185b2f..79b841049c 100644 ---- a/config/action.d/mail-buffered.conf -+++ b/config/action.d/mail-buffered.conf -@@ -17,7 +17,7 @@ actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Output will be buffered until lines are available.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -28,13 +28,13 @@ actionstop = if [ -f ]; then - These hosts have been banned by Fail2Ban.\n - `cat ` - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : Summary from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : Summary from " - rm - fi - printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -55,7 +55,7 @@ actionban = printf %%b "`date`: ( failures)\n" >> - These hosts have been banned by Fail2Ban.\n - `cat ` - \nRegards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : Summary" -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : Summary" - rm - fi - -diff --git a/config/action.d/mail-whois-lines.conf b/config/action.d/mail-whois-lines.conf -index 3a3e56b2c7..d2818cb9b9 100644 ---- a/config/action.d/mail-whois-lines.conf -+++ b/config/action.d/mail-whois-lines.conf -@@ -72,7 +72,7 @@ actionunban = - # Notes.: Your system mail command. Is passed 2 args: subject and recipient - # Values: CMD - # --mailcmd = mail -s -+mailcmd = mail -E 'set escape' -s - - # Default name of the chain - # -diff --git a/config/action.d/mail-whois.conf b/config/action.d/mail-whois.conf -index 7fea34c40d..ab33b616dc 100644 ---- a/config/action.d/mail-whois.conf -+++ b/config/action.d/mail-whois.conf -@@ -20,7 +20,7 @@ norestored = 1 - actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -29,7 +29,7 @@ actionstart = printf %%b "Hi,\n - actionstop = printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -49,7 +49,7 @@ actionban = printf %%b "Hi,\n - Here is more information about :\n - `%(_whois_command)s`\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : banned from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : banned from " - - # Option: actionunban - # Notes.: command executed when unbanning an IP. Take care that the -diff --git a/config/action.d/mail.conf b/config/action.d/mail.conf -index 5d8c0e154c..f4838ddcb6 100644 ---- a/config/action.d/mail.conf -+++ b/config/action.d/mail.conf -@@ -16,7 +16,7 @@ norestored = 1 - actionstart = printf %%b "Hi,\n - The jail has been started successfully.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : started on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : started on " - - # Option: actionstop - # Notes.: command executed at the stop of jail (or at the end of Fail2Ban) -@@ -25,7 +25,7 @@ actionstart = printf %%b "Hi,\n - actionstop = printf %%b "Hi,\n - The jail has been stopped.\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : stopped on " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : stopped on " - - # Option: actioncheck - # Notes.: command executed once before each actionban command -@@ -43,7 +43,7 @@ actionban = printf %%b "Hi,\n - The IP has just been banned by Fail2Ban after - attempts against .\n - Regards,\n -- Fail2Ban"|mail -s "[Fail2Ban] : banned from " -+ Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] : banned from " - - # Option: actionunban - # Notes.: command executed when unbanning an IP. Take care that the diff --git a/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch b/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch deleted file mode 100644 index 8cb097dc38..0000000000 --- a/package/fail2ban/0002-fix-gh-3098-build-fails-with-error-in-fail2ban-setup-command.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 5ac303df8a171f748330d4c645ccbf1c2c7f3497 Mon Sep 17 00:00:00 2001 -From: sebres -Date: Sun, 19 Sep 2021 18:49:18 +0200 -Subject: [PATCH] fix gh-3098: build fails with error in fail2ban setup - command: use_2to3 is invalid (setuptools 58+) - -[Retrieved from: -https://github.com/fail2ban/fail2ban/commit/5ac303df8a171f748330d4c645ccbf1c2c7f3497] -Signed-off-by: Fabrice Fontaine ---- - setup.py | 16 +--------------- - 1 file changed, 1 insertion(+), 15 deletions(-) - -diff --git a/setup.py b/setup.py -index f4c2550f6..98413273c 100755 ---- a/setup.py -+++ b/setup.py -@@ -48,7 +48,7 @@ - from glob import glob - - from fail2ban.setup import updatePyExec -- -+from fail2ban.version import version - - source_dir = os.path.realpath(os.path.dirname( - # __file__ seems to be overwritten sometimes on some python versions (e.g. bug of 2.6 by running under cProfile, etc.): -@@ -112,22 +112,12 @@ def update_scripts(self, dry_run=False): - # Wrapper to specify fail2ban own options: - class install_command_f2b(install): - user_options = install.user_options + [ -- ('disable-2to3', None, 'Specify to deactivate 2to3, e.g. if the install runs from fail2ban test-cases.'), - ('without-tests', None, 'without tests files installation'), - ] - def initialize_options(self): -- self.disable_2to3 = None - self.without_tests = not with_tests - install.initialize_options(self) - def finalize_options(self): -- global _2to3 -- ## in the test cases 2to3 should be already done (fail2ban-2to3): -- if self.disable_2to3: -- _2to3 = False -- if _2to3: -- cmdclass = self.distribution.cmdclass -- cmdclass['build_py'] = build_py_2to3 -- cmdclass['build_scripts'] = build_scripts_2to3 - if self.without_tests: - self.distribution.scripts.remove('bin/fail2ban-testcases') - -@@ -178,7 +168,6 @@ def run(self): - if setuptools: - setup_extra = { - 'test_suite': "fail2ban.tests.utils.gatherTests", -- 'use_2to3': True, - } - else: - setup_extra = {} -@@ -202,9 +191,6 @@ def run(self): - ('/usr/share/doc/fail2ban', doc_files) - ) - --# Get version number, avoiding importing fail2ban. --# This is due to tests not functioning for python3 as 2to3 takes place later --exec(open(join("fail2ban", "version.py")).read()) - - setup( - name = "fail2ban", diff --git a/package/fail2ban/fail2ban.hash b/package/fail2ban/fail2ban.hash index 072f0ef961..4073efe4c7 100644 --- a/package/fail2ban/fail2ban.hash +++ b/package/fail2ban/fail2ban.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 383108e5f8644cefb288537950923b7520f642e7e114efb843f6e7ea9268b1e0 fail2ban-0.11.2.tar.gz +sha256 62b54679ebae81ac57f32c5e27aba9f2494ec5bafd45a0fd68e7a27fd448e5ac fail2ban-1.0.1.tar.gz sha256 a75fec0260742fe6275d63ff6a5d97b924b28766558306b3fa4069763096929b COPYING diff --git a/package/fail2ban/fail2ban.mk b/package/fail2ban/fail2ban.mk index 4a08981a97..288266c2c7 100644 --- a/package/fail2ban/fail2ban.mk +++ b/package/fail2ban/fail2ban.mk @@ -4,7 +4,7 @@ # ################################################################################ -FAIL2BAN_VERSION = 0.11.2 +FAIL2BAN_VERSION = 1.0.1 FAIL2BAN_SITE = $(call github,fail2ban,fail2ban,$(FAIL2BAN_VERSION)) FAIL2BAN_LICENSE = GPL-2.0+ FAIL2BAN_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:14 +0200 Subject: [Buildroot] [PATCH 1/4] package/mender: bump version to 3.4.0 In-Reply-To: <20221005212150.1384370-1-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> Message-ID: <20221006214114.003cd90f@windsurf> On Wed, 5 Oct 2022 14:21:47 -0700 Adam Duskett wrote: > Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a > year change. > > Signed-off-by: Adam Duskett > --- > package/mender/mender.hash | 6 +++--- > package/mender/mender.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:17 +0200 Subject: [Buildroot] [PATCH 2/4] package/mender-connect: bump version to 2.1.0 In-Reply-To: <20221005212150.1384370-2-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-2-aduskett@gmail.com> Message-ID: <20221006214117.1f218112@windsurf> On Wed, 5 Oct 2022 14:21:48 -0700 Adam Duskett wrote: > Signed-off-by: Adam Duskett > --- > package/mender-connect/mender-connect.hash | 2 +- > package/mender-connect/mender-connect.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:41:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:41:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/liburiparser: bump to version 0.9.7 In-Reply-To: <20221005200621.229757-1-fontaine.fabrice@gmail.com> References: <20221005200621.229757-1-fontaine.fabrice@gmail.com> Message-ID: <20221006214123.6901795e@windsurf> On Wed, 5 Oct 2022 22:06:21 +0200 Fabrice Fontaine wrote: > https://github.com/uriparser/uriparser/blob/uriparser-0.9.7/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/liburiparser/liburiparser.hash | 2 +- > package/liburiparser/liburiparser.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:42:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:42:57 +0200 Subject: [Buildroot] [PATCH 3/4] package/mender-artifact: bump version to 3.9.0 In-Reply-To: <20221005212150.1384370-3-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-3-aduskett@gmail.com> Message-ID: <20221006214257.47c453f5@windsurf> On Wed, 5 Oct 2022 14:21:49 -0700 Adam Duskett wrote: > mender-artifact now requires OpenSSL, and is incompatible with OpenSSL3. > As such, the host-pkgconf and host-libopenssl packages are now dependencies to > prevent linking errors against OpenSSL3 on newer distributions such as > Fedora 35. Even if mender-artifact was compatible with OpenSSL3, it would be a bug to rely on the system-provided OpenSSL library. > +# Mender-artifact requires OpenSSL, and is not yet compatible with OpenSSL3. > +# Mender-artifact also uses pkgconf to find the OpenSSL library. > +# Use host-pkgconf to force mender-artifact to use Buildroots host-openssl, as > +# newer distributions, such as Fedora, are starting to use OpenSSL3. > +HOST_MENDER_ARTIFACT_GO_ENV = \ > + GOFLAGS="-mod=vendor" \ > + PKG_CONFIG_PATH="$(HOST_DIR)/lib/pkgconfig" Why is -mod=vendor needed here? Also for pkg-config, I would prefer if we were to use the same variables as defined in HOST_MAKE_ENV (in package/Makefile.in), i.e: HOST_MAKE_ENV = \ PATH=$(BR_PATH) \ PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \ PKG_CONFIG_SYSROOT_DIR="/" \ PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig" Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:45:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:45:39 +0200 Subject: [Buildroot] [git commit] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b Message-ID: <20221006194555.858A986A63@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9e698c552bab51703014788ac1d61893868ee316 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mender-grubenv no longer uses the mender_grubenv* directories, instead opting to put the mender_grubenv directories in a grub-mender-grubenv top-level directory. While there is a legacy install mode which keeps the two separate directories, it is better to move forward and rip the bandaid off before it becomes too painful to update in the future if the legacy option is removed entirely. - Update the license file sha256 sum due to a year change. - mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied manually to grub.cfg. - BOOT_DIR replaces ENV_DIR in the Makefile. - The sleep grub2 module is now a requirement. - /etc/mender_grubenv.config file must be present on the system for the grub-mender-grubenv-{print,set} scripts to work properly. In addition to the above changes, update the mender example board file to work with the updated mender-grubenv version. Signed-off-by: Adam Duskett Signed-off-by: Thomas Petazzoni --- board/mender/x86_64/genimage-efi.cfg | 3 +++ configs/mender_x86_64_efi_defconfig | 2 +- package/mender-grubenv/mender-grubenv.hash | 4 ++-- package/mender-grubenv/mender-grubenv.mk | 22 +++++++++++++++------- 4 files changed, 21 insertions(+), 10 deletions(-) diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg index 10cefe2380..9c2723d8fb 100644 --- a/board/mender/x86_64/genimage-efi.cfg +++ b/board/mender/x86_64/genimage-efi.cfg @@ -3,6 +3,9 @@ image efi-part.vfat { file EFI { image = "efi-part/EFI" } + file grub-mender-grubenv { + image = "efi-part/grub-mender-grubenv" + } file bzImage { image = "bzImage" } diff --git a/configs/mender_x86_64_efi_defconfig b/configs/mender_x86_64_efi_defconfig index 2ec6f6f76c..25a463abb3 100644 --- a/configs/mender_x86_64_efi_defconfig +++ b/configs/mender_x86_64_efi_defconfig @@ -19,7 +19,7 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_X86_64_EFI=y # Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES -BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp" +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep" BR2_TARGET_GRUB2_INSTALL_TOOLS=y # Required tools to create a mender image diff --git a/package/mender-grubenv/mender-grubenv.hash b/package/mender-grubenv/mender-grubenv.hash index 3be5f51a9e..193bff073b 100644 --- a/package/mender-grubenv/mender-grubenv.hash +++ b/package/mender-grubenv/mender-grubenv.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00a574d2bed8d54ba6739700da789a420a02de900df56dd2cfbe0df460a98dca mender-grubenv-1a7db967495bbe8be53b7a69dcb42822f39d9a74.tar.gz -sha256 b4acfcfa2a0ba1a8c82ec3965fbcee886cff8394ca4214e0ddac0a36beb1e05a LICENSE +sha256 b7a08eb3d996afb38c1a4f7c51b7eb44aec6197ff713ce75e4f39d5b448cfc82 mender-grubenv-2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b.tar.gz +sha256 1033348db7606a7e61b6484f293847cf8d7a35766efebb97e304d4bd5d7f3f6b LICENSE diff --git a/package/mender-grubenv/mender-grubenv.mk b/package/mender-grubenv/mender-grubenv.mk index 9d5be8d8f4..8679ad9236 100644 --- a/package/mender-grubenv/mender-grubenv.mk +++ b/package/mender-grubenv/mender-grubenv.mk @@ -4,7 +4,7 @@ # ################################################################################ -MENDER_GRUBENV_VERSION = 1a7db967495bbe8be53b7a69dcb42822f39d9a74 +MENDER_GRUBENV_VERSION = 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b MENDER_GRUBENV_SITE = $(call github,mendersoftware,grub-mender-grubenv,$(MENDER_GRUBENV_VERSION)) MENDER_GRUBENV_LICENSE = Apache-2.0 MENDER_GRUBENV_LICENSE_FILES = LICENSE @@ -30,13 +30,15 @@ MENDER_GRUBENV_MODULES_MISSING_PC = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_PC)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/grub +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/grub define MENDER_GRUBENV_INSTALL_I386_CFG mkdir -p $(BINARIES_DIR)/boot-part/grub + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/grub/grub.cfg cp -dpfr $(TARGET_DIR)/boot/grub/grub.cfg \ - $(TARGET_DIR)/boot/grub/mender_grubenv* \ - $(BINARIES_DIR)/boot-part/grub + $(TARGET_DIR)/boot/grub/grub-mender-grubenv \ + $(BINARIES_DIR)/boot-part/ endef endif # BR2_TARGET_GRUB2_HAS_LEGACY_BOOT @@ -45,13 +47,16 @@ MENDER_GRUBENV_MODULES_MISSING_EFI = \ $(filter-out $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI)),\ $(MENDER_GRUBENV_MANDATORY_MODULES)) -MENDER_GRUBENV_MAKE_ENV += ENV_DIR=/boot/EFI/BOOT +MENDER_GRUBENV_MAKE_ENV += BOOT_DIR=/boot/EFI/BOOT define MENDER_GRUBENV_INSTALL_EFI_CFG mkdir -p $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(@D)/mender_grub.cfg \ + $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub.cfg \ - $(TARGET_DIR)/boot/EFI/BOOT/mender_grubenv* \ $(BINARIES_DIR)/efi-part/EFI/BOOT + cp -dpfr $(TARGET_DIR)/boot/EFI/BOOT/grub-mender-grubenv \ + $(BINARIES_DIR)/efi-part/ endef endif # BR2_TARGET_GRUB2_HAS_EFI_BOOT @@ -75,7 +80,10 @@ define MENDER_GRUBENV_BUILD_CMDS endef define MENDER_GRUBENV_INSTALL_TARGET_CMDS - $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install + $(MENDER_GRUBENV_MAKE_ENV) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) \ + install install-boot-env + # The grub-mender-grubenv-* utilities use this file to function. + echo 'ENV_DIR=/boot/grub-mender-grubenv' > $(TARGET_DIR)/etc/mender_grubenv.config endef define MENDER_GRUBENV_INSTALL_IMAGES_CMDS From thomas.petazzoni at bootlin.com Thu Oct 6 19:46:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:46:18 +0200 Subject: [Buildroot] [PATCH 4/4] package/mender-grubenv: bump version to 2ac898f5924d5870f8394ad8ecd3ef1ab1422e3b In-Reply-To: <20221005212150.1384370-4-aduskett@gmail.com> References: <20221005212150.1384370-1-aduskett@gmail.com> <20221005212150.1384370-4-aduskett@gmail.com> Message-ID: <20221006214618.5c2e8a00@windsurf> On Wed, 5 Oct 2022 14:21:50 -0700 Adam Duskett wrote: > diff --git a/board/mender/x86_64/genimage-efi.cfg b/board/mender/x86_64/genimage-efi.cfg > index 10cefe2380..4ed064c498 100644 > --- a/board/mender/x86_64/genimage-efi.cfg > +++ b/board/mender/x86_64/genimage-efi.cfg > @@ -3,6 +3,9 @@ image efi-part.vfat { > file EFI { > image = "efi-part/EFI" > } > + file grub-mender-grubenv { > + image = "efi-part/grub-mender-grubenv" Indentation here was not correct. I fixed that small nit and applied to master. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 19:50:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 21:50:57 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221006215057.49eec773@windsurf> Hello, On Thu, 6 Oct 2022 10:27:57 +0200 Gwenhael Goavec-Merou wrote: > - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, > bindings and python wrappers are produces using pybind: this why python-pybind > is a buildtime dependency. This one is a stagging only package (nothing > installed into target directory -> no select BR2_PACKAGE_PYTHON_PYBIND > added to Config.in but GNURADIO_DEPENDENCIES is updated with python-pybind). I am sorry, but this still doesn't make any sense, and will in fact cause build failures. A package cannot have a target package in its _DEPENDENCIES variable without selecting it. If python-pybind is needed at build time on the host, then GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing needs to be done in Config.in. If python-pybind is needed on the target, then two options: (1) It's needed only at runtime => it should be selected in Config.in. (2) It's needed at build-time => it should be selected in Config.in *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd like to see a serious justification, because it is really uncommon to have target Python packages be build-time dependencies. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From wg at grandegger.com Thu Oct 6 19:52:11 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Thu, 6 Oct 2022 21:52:11 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging Message-ID: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> UDisks2 provides an Library API [1] for accessing the UDisks2 service via "libudisks2.so". For development of UDisks2 clients, install to staging as well! This issue has been reported as bug [2] as well. [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] [2] https://bugs.busybox.net/show_bug.cgi?id=15026 Signed-off-by: Wolfgang Grandegger --- package/udisks/udisks.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk index 2bf519a2cc..959333d01f 100644 --- a/package/udisks/udisks.mk +++ b/package/udisks/udisks.mk @@ -10,6 +10,7 @@ UDISKS_SITE = https://github.com/storaged-project/udisks/releases/download/udisk UDISKS_LICENSE = GPL-2.0+ UDISKS_LICENSE_FILES = COPYING UDISKS_CPE_ID_VENDOR = freedesktop +UDISKS_INSTALL_STAGING = YES UDISKS_DEPENDENCIES = \ host-pkgconf \ -- 2.34.1 From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:03 +0200 Subject: [Buildroot] [git commit] configs/octavo_osd32mp1_red: update BSP components Message-ID: <20221006200251.84FA186AC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f088e6841d2b338037d25e50aaf8fc28b8fb384 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update description: TF-A to v2.4-stm32mp-r1 U-boot to version v2020.10-stm32mp-r2.1 Linux to v5.10-stm32mp-r2.1 This patch also updates U-boot to to use FIP image. Reference: https://octavosystems.com/octavo_products/osd32mp1-red/ The device tree blobs, and the U-boot patches come from Octavo System: https://github.com/octavosystems/meta-octavo-osd32mp1 Signed-off-by: Kory Maincent Signed-off-by: Thomas Petazzoni --- board/octavo/osd32mp1-red/genimage.cfg | 8 +- ...d32mp1-red.dts => stm32mp157c-osd32mp1-red.dts} | 591 +++--- .../linux-dts/stm32mp157c-osd32mp1-red.dtsi | 2077 -------------------- .../overlay/boot/extlinux/extlinux.conf | 2 +- ...0001-Add-OSD32MP1-RED-Device-Tree-support.patch | 1180 ++++++----- ...32mp15_trusted_defconfig-disable-environm.patch | 47 +- ...x4Gb-1066-binG.dtsi => osd32mp1_ddr_1x4Gb.dtsi} | 12 +- .../tfa-dts/stm32mp157c-osd32mp1-red-fw-config.dts | 6 + ...d32mp1-red.dts => stm32mp157c-osd32mp1-red.dts} | 672 +++---- configs/octavo_osd32mp1_red_defconfig | 24 +- 10 files changed, 1308 insertions(+), 3311 deletions(-) Patch is too large, so refusing to show it From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:36 +0200 Subject: [Buildroot] [git commit] package/cups-filters: fix check-package warning Message-ID: <20221006200251.A78E686AC7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f76d177dacad9f9f56cfaa955f948398c230bc23 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: package/cups-filters/cups-filters.mk:83: consecutive empty lines Signed-off-by: Thomas Petazzoni --- package/cups-filters/cups-filters.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/cups-filters/cups-filters.mk b/package/cups-filters/cups-filters.mk index 7a3c894112..3250649e07 100644 --- a/package/cups-filters/cups-filters.mk +++ b/package/cups-filters/cups-filters.mk @@ -80,7 +80,6 @@ else CUPS_FILTERS_CONF_OPTS += --disable-exif endif - define CUPS_FILTERS_INSTALL_INIT_SYSV $(INSTALL) -D -m 0755 package/cups-filters/S82cups-browsed \ $(TARGET_DIR)/etc/init.d/S82cups-browsed From thomas.petazzoni at bootlin.com Thu Oct 6 20:02:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:02:26 +0200 Subject: [Buildroot] [git commit] configs/octavo_osd32mp1_brk: update BSP components Message-ID: <20221006200251.9991086A62@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=04ae71b567587977be9d07ade764159b31f1f403 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update description: TF-A to v2.4-stm32mp-r1 U-boot to version v2020.10-stm32mp-r2.1 Linux to v5.10-stm32mp-r2.1 This patch also updates U-boot to to use FIP image. Reference: https://octavosystems.com/octavo_products/osd32mp1-brk/ The device tree blobs, and the U-boot patches come from Octavo System: https://github.com/octavosystems/meta-octavo-osd32mp1 Signed-off-by: Kory Maincent Signed-off-by: Thomas Petazzoni --- board/octavo/osd32mp1-brk/genimage.cfg | 4 +- .../linux-dts/stm32mp157c-osd32mp1-brk.dts | 809 ++++--- ...0001-Add-OSD32MP1-BRK-device-tree-support.patch | 1509 +++++++++++++ .../uboot/0001-osd32mp1-BRK-board-added.patch | 2349 -------------------- .../uboot/0002-Add-OSD32MP1-BRK-build-config.patch | 881 ++++++++ .../{osd32mp1_ddr.dtsi => osd32mp1_ddr_1x4Gb.dtsi} | 2 + .../tfa-dts/stm32mp157c-osd32mp1-brk-fw-config.dts | 6 + .../tfa-dts/stm32mp157c-osd32mp1-brk.dts | 502 ++--- configs/octavo_osd32mp1_brk_defconfig | 20 +- 9 files changed, 3027 insertions(+), 3055 deletions(-) Patch is too large, so refusing to show it From thomas.petazzoni at bootlin.com Thu Oct 6 20:03:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:03:35 +0200 Subject: [Buildroot] [PATCH 1/2] board/octavo/osd32mp1-red: update BSP components In-Reply-To: <20221005075815.305236-1-kory.maincent@bootlin.com> References: <20221005075815.305236-1-kory.maincent@bootlin.com> Message-ID: <20221006220335.22132976@windsurf> On Wed, 5 Oct 2022 09:58:13 +0200 K?ry Maincent via buildroot wrote: > From: Kory Maincent > > Update description: > TF-A to v2.4-stm32mp-r1 > U-boot to version v2020.10-stm32mp-r2.1 > Linux to v5.10-stm32mp-r2.1 > > This patch also updates U-boot to to use FIP image. > > Reference: > > https://octavosystems.com/octavo_products/osd32mp1-red/ > > The device tree blobs, and the U-boot patches come from Octavo System: > > https://github.com/octavosystems/meta-octavo-osd32mp1 > > Signed-off-by: Kory Maincent I've applied both patches, but to be honest, I hate having these huge Device Tree files in Buildroot... Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 6 20:09:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:09:35 +0200 Subject: [Buildroot] [git commit] package/efibootmgr: bump to version 18 Message-ID: <20221006200948.0D88386AD7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5d52814f60d5ed6b981dabf0cf6d439a203560e2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches which are already applied upstream. Signed-off-by: Erico Nunes Signed-off-by: Thomas Petazzoni --- .../efibootmgr/0001-Allow-build-with-uClibc.patch | 40 ---------------------- package/efibootmgr/0002-remove-extra-decl.patch | 28 --------------- package/efibootmgr/efibootmgr.hash | 2 +- package/efibootmgr/efibootmgr.mk | 2 +- 4 files changed, 2 insertions(+), 70 deletions(-) diff --git a/package/efibootmgr/0001-Allow-build-with-uClibc.patch b/package/efibootmgr/0001-Allow-build-with-uClibc.patch deleted file mode 100644 index fd29233dc3..0000000000 --- a/package/efibootmgr/0001-Allow-build-with-uClibc.patch +++ /dev/null @@ -1,40 +0,0 @@ -From bbfcc60497c326576bb23cb01d90115ef3cf6947 Mon Sep 17 00:00:00 2001 -From: Andy Shevchenko -Date: Fri, 25 Nov 2016 20:26:52 +0200 -Subject: [PATCH] Remove unneeded include - -This fixes the build with uClibc. - -Signed-off-by: Andy Shevchenko ---- - src/efibootdump.c | 1 - - src/eficonman.c | 1 - - 2 files changed, 2 deletions(-) - -diff --git a/src/efibootdump.c b/src/efibootdump.c -index 6ff8360..7c5a1c5 100644 ---- a/src/efibootdump.c -+++ b/src/efibootdump.c -@@ -19,7 +19,6 @@ - #include - #include - #include --#include - #include - - #include "error.h" -diff --git a/src/eficonman.c b/src/eficonman.c -index 2c2be38..9bfae79 100644 ---- a/src/eficonman.c -+++ b/src/eficonman.c -@@ -17,7 +17,6 @@ - #include - #include - #include --#include - #include - - #define _(String) gettext (String) --- -2.10.2 - diff --git a/package/efibootmgr/0002-remove-extra-decl.patch b/package/efibootmgr/0002-remove-extra-decl.patch deleted file mode 100644 index f838d50a20..0000000000 --- a/package/efibootmgr/0002-remove-extra-decl.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 99b578501643377e0b1994b2a068b790d189d5ad Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Wed, 13 Jun 2018 09:41:01 -0400 -Subject: [PATCH] remove extra decl - -Downloaded from upstream commit -https://github.com/rhboot/efibootmgr/commit/99b578501643377e0b1994b2a068b790d189d5ad - -Signed-off-by: Peter Jones -Signed-off-by: Bernd Kuhls ---- - src/efibootmgr.c | 3 --- - 1 file changed, 3 deletions(-) - -diff --git a/src/efibootmgr.c b/src/efibootmgr.c -index de38f01..4e1a680 100644 ---- a/src/efibootmgr.c -+++ b/src/efibootmgr.c -@@ -1536,9 +1536,6 @@ parse_opts(int argc, char **argv) - "invalid numeric value %s\n", - optarg); - } -- /* XXX efivar-36 accidentally doesn't have a public -- * header for this */ -- extern int efi_set_verbose(int verbosity, FILE *errlog); - efi_set_verbose(opts.verbose - 2, stderr); - break; - case 'V': diff --git a/package/efibootmgr/efibootmgr.hash b/package/efibootmgr/efibootmgr.hash index fdbc9a2732..71a9826331 100644 --- a/package/efibootmgr/efibootmgr.hash +++ b/package/efibootmgr/efibootmgr.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 22a95ebe0d5c9fb2915b3a100450f8f37484d1dbb8b296f55b343cc84f10397d efibootmgr-17.tar.gz +sha256 442867d12f8525034a404fc8af3036dba8e1fc970998af2486c3b940dfad0874 efibootmgr-18.tar.gz sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/efibootmgr/efibootmgr.mk b/package/efibootmgr/efibootmgr.mk index 7e09b5f659..672a93c282 100644 --- a/package/efibootmgr/efibootmgr.mk +++ b/package/efibootmgr/efibootmgr.mk @@ -4,7 +4,7 @@ # ################################################################################ -EFIBOOTMGR_VERSION = 17 +EFIBOOTMGR_VERSION = 18 EFIBOOTMGR_SITE = $(call github,rhboot,efibootmgr,$(EFIBOOTMGR_VERSION)) EFIBOOTMGR_LICENSE = GPL-2.0+ EFIBOOTMGR_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 6 20:09:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:09:32 +0200 Subject: [Buildroot] [git commit] package/efivar: bump to version 38 Message-ID: <20221006200948.03F8E86AD5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f24029b561fbda0953c7dbd93d2485b03873996d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop backported patches and rebase the ones that are still relevant. >From version 37 to 38, there is a new build system in place, which is still custom Makefiles. This introduces a host-efivar package to account for the 'makeguids' tool. Previously it was not too cumbersome to work around building that tool for the host, but with the new build system it is increasingly coupled with the target build that the least hacky way to work around it is with a host package and a Makefile patch. Signed-off-by: Erico Nunes Signed-off-by: Thomas Petazzoni --- package/efivar/0001-Allow-build-with-uClibc.patch | 12 +- ...ormat_guid-handle-misaligned-guid-pointer.patch | 62 -------- ...rror.patch => 0002-gcc.specs-drop-Werror.patch} | 34 ++-- ...-places-Werror-address-of-packed-member-c.patch | 174 --------------------- ...-efivar-isolate-makeguids-host-tool-build.patch | 48 ++++++ ...-error-of-Werror-address-of-packed-member.patch | 57 ------- .../0005-ucs2.h-remove-unused-variable.patch | 35 ----- ...logic-that-checks-for-UCS-2-string-termin.patch | 32 ---- package/efivar/efivar.hash | 2 +- package/efivar/efivar.mk | 24 ++- 10 files changed, 93 insertions(+), 387 deletions(-) diff --git a/package/efivar/0001-Allow-build-with-uClibc.patch b/package/efivar/0001-Allow-build-with-uClibc.patch index 0db9955760..0da80f26d2 100644 --- a/package/efivar/0001-Allow-build-with-uClibc.patch +++ b/package/efivar/0001-Allow-build-with-uClibc.patch @@ -1,4 +1,4 @@ -From f1f24eb486c4376066884bae3c31f1c455a79836 Mon Sep 17 00:00:00 2001 +From bfd9cd9e603ef0d0e593d4432048bffc2acfeb7c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 25 Nov 2016 19:42:27 +0200 Subject: [PATCH] Allow build with uClibc @@ -6,15 +6,17 @@ Subject: [PATCH] Allow build with uClibc Basically this replaces type definitions in . Signed-off-by: Andy Shevchenko +[Erico: rebase to 38] +Signed-off-by: Erico Nunes --- src/export.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/src/export.c b/src/export.c -index 8321bd3..ef36add 100644 +index db5e637..21c5617 100644 --- a/src/export.c +++ b/src/export.c -@@ -23,10 +23,16 @@ +@@ -9,10 +9,16 @@ #include #include #include @@ -29,9 +31,9 @@ index 8321bd3..ef36add 100644 +#include +#endif + - #define EFIVAR_MAGIC 0xf3df1597 + #define EFIVAR_MAGIC 0xf3df1597u #define ATTRS_UNSET 0xa5a5a5a5a5a5a5a5 -- -2.20.1 +2.37.3 diff --git a/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch b/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch deleted file mode 100644 index 37fd39a127..0000000000 --- a/package/efivar/0002-dp.h-make-format_guid-handle-misaligned-guid-pointer.patch +++ /dev/null @@ -1,62 +0,0 @@ -From b98ba8921010d03f46704a476c69861515deb1ca Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Mon, 7 Jan 2019 10:30:59 -0500 -Subject: [PATCH] dp.h: make format_guid() handle misaligned guid pointers - safely. - -GCC 9 adds -Werror=address-of-packed-member, which causes us to see the -build error reported at - https://bugzilla.opensuse.org/show_bug.cgi?id=1120862 . - -That bug report shows us the following: - -In file included from dp.c:26: -dp.h: In function 'format_vendor_helper': -dp.h:120:37: error: taking address of packed member of 'struct ' may result in an unaligned pointer value [-Werror=address-of-packed-member] - 120 | format_guid(buf, size, off, label, &dp->hw_vendor.vendor_guid); - | ^~~~~~~~~~~~~~~~~~~~~~~~~~ -dp.h:74:25: note: in definition of macro 'format_guid' - 74 | _rc = efi_guid_to_str(guid, &_guidstr); \ - | ^~~~ -cc1: all warnings being treated as errors - -This patch makes format_guid() use a local variable as a bounce buffer -in the case that the guid we're passed is aligned as chaotic neutral. - -Note that this only fixes this instance and there may be others that bz -didn't show because it exited too soon, and I don't have a gcc 9 build -in front of me right now. - -Signed-off-by: Peter Jones -[james.hilliard1 at gmail.com: backport from upstream commit -b98ba8921010d03f46704a476c69861515deb1ca] -Signed-off-by: James Hilliard ---- - src/dp.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/src/dp.h b/src/dp.h -index aa4e390..20cb608 100644 ---- a/src/dp.h -+++ b/src/dp.h -@@ -70,8 +70,15 @@ - #define format_guid(buf, size, off, dp_type, guid) ({ \ - int _rc; \ - char *_guidstr = NULL; \ -- \ -- _rc = efi_guid_to_str(guid, &_guidstr); \ -+ efi_guid_t _guid; \ -+ const efi_guid_t * const _guid_p = \ -+ likely(__alignof__(guid) == sizeof(guid)) \ -+ ? guid \ -+ : &_guid; \ -+ \ -+ if (unlikely(__alignof__(guid) == sizeof(guid))) \ -+ memmove(&_guid, guid, sizeof(_guid)); \ -+ _rc = efi_guid_to_str(_guid_p, &_guidstr); \ - if (_rc < 0) { \ - efi_error("could not build %s GUID DP string", \ - dp_type); \ --- -2.20.1 - diff --git a/package/efivar/0007-gcc.specs-drop-Werror.patch b/package/efivar/0002-gcc.specs-drop-Werror.patch similarity index 68% rename from package/efivar/0007-gcc.specs-drop-Werror.patch rename to package/efivar/0002-gcc.specs-drop-Werror.patch index aa717fedaf..a25b844906 100644 --- a/package/efivar/0007-gcc.specs-drop-Werror.patch +++ b/package/efivar/0002-gcc.specs-drop-Werror.patch @@ -1,4 +1,4 @@ -From 8d5cf3347cce9d644f670ffd1d48e71d74635481 Mon Sep 17 00:00:00 2001 +From a1d469753528a98aec971377a526619da5054b20 Mon Sep 17 00:00:00 2001 From: Fabrice Fontaine Date: Mon, 22 Mar 2021 07:52:34 +0100 Subject: [PATCH] gcc.specs: drop -Werror @@ -22,23 +22,25 @@ Signed-off-by: Fabrice Fontaine [Upstream status: not upstreamable as Makefiles were reworked and a new ERRORS parameter was added: https://github.com/rhboot/efivar/commit/998f617cec92d526e1fadb745673ceef63fa1483] +[Erico: rebase to 38] +Signed-off-by: Erico Nunes --- - gcc.specs | 2 +- + src/include/defaults.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/gcc.specs b/gcc.specs -index 45d43d1..1baf11a 100644 ---- a/gcc.specs -+++ b/gcc.specs -@@ -2,7 +2,7 @@ - + -D_GNU_SOURCE - - *efivar_cpp_options: -- -Werror -Wall -std=gnu11 -Wextra -+ -Wall -std=gnu11 -Wextra - - *cpp_options: - + %(efivar_cpp_options) +diff --git a/src/include/defaults.mk b/src/include/defaults.mk +index 632b155..2a9537a 100644 +--- a/src/include/defaults.mk ++++ b/src/include/defaults.mk +@@ -29,7 +29,7 @@ WARNINGS_GCC ?= + WARNINGS_CCC_ANALYZER ?= $(WARNINGS_GCC) + WARNINGS ?= -Wall -Wextra $(call family,WARNINGS) + ERRORS_GCC ?= +-ERRORS ?= -Werror $(call family,ERRORS) ++ERRORS ?= $(call family,ERRORS) + CPPFLAGS ?= + override _CPPFLAGS := $(CPPFLAGS) + override CPPFLAGS = $(_CPPFLAGS) -DLIBEFIVAR_VERSION=$(VERSION) \ -- -2.30.1 +2.37.3 diff --git a/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch b/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch deleted file mode 100644 index 52db443b7e..0000000000 --- a/package/efivar/0003-Fix-all-the-places-Werror-address-of-packed-member-c.patch +++ /dev/null @@ -1,174 +0,0 @@ -From c3c553db85ff10890209d0fe48fb4856ad68e4e0 Mon Sep 17 00:00:00 2001 -From: Peter Jones -Date: Thu, 21 Feb 2019 15:20:12 -0500 -Subject: [PATCH] Fix all the places -Werror=address-of-packed-member catches. - -This gets rid of all the places GCC 9's -Werror=address-of-packed-member -flags as problematic. - -Fixes github issue #123 - -Signed-off-by: Peter Jones -[james.hilliard1 at gmail.com: backport from upstream commit -c3c553db85ff10890209d0fe48fb4856ad68e4e0] -Signed-off-by: James Hilliard ---- - src/dp-message.c | 6 ++++-- - src/dp.h | 12 ++++-------- - src/guid.c | 2 +- - src/include/efivar/efivar.h | 2 +- - src/ucs2.h | 27 +++++++++++++++++++-------- - 5 files changed, 29 insertions(+), 20 deletions(-) - -diff --git a/src/dp-message.c b/src/dp-message.c -index 3724e5f..9f96466 100644 ---- a/src/dp-message.c -+++ b/src/dp-message.c -@@ -620,11 +620,13 @@ _format_message_dn(char *buf, size_t size, const_efidp dp) - ) / sizeof(efi_ip_addr_t); - format(buf, size, off, "Dns", "Dns("); - for (int i=0; i < end; i++) { -- const efi_ip_addr_t *addr = &dp->dns.addrs[i]; -+ efi_ip_addr_t addr; -+ -+ memcpy(&addr, &dp->dns.addrs[i], sizeof(addr)); - if (i != 0) - format(buf, size, off, "Dns", ","); - format_ip_addr(buf, size, off, "Dns", -- dp->dns.is_ipv6, addr); -+ dp->dns.is_ipv6, &addr); - } - format(buf, size, off, "Dns", ")"); - break; -diff --git a/src/dp.h b/src/dp.h -index 20cb608..1f921d5 100644 ---- a/src/dp.h -+++ b/src/dp.h -@@ -71,13 +71,9 @@ - int _rc; \ - char *_guidstr = NULL; \ - efi_guid_t _guid; \ -- const efi_guid_t * const _guid_p = \ -- likely(__alignof__(guid) == sizeof(guid)) \ -- ? guid \ -- : &_guid; \ -- \ -- if (unlikely(__alignof__(guid) == sizeof(guid))) \ -- memmove(&_guid, guid, sizeof(_guid)); \ -+ const efi_guid_t * const _guid_p = &_guid; \ -+ \ -+ memmove(&_guid, guid, sizeof(_guid)); \ - _rc = efi_guid_to_str(_guid_p, &_guidstr); \ - if (_rc < 0) { \ - efi_error("could not build %s GUID DP string", \ -@@ -86,7 +82,7 @@ - _guidstr = onstack(_guidstr, \ - strlen(_guidstr)+1); \ - _rc = format(buf, size, off, dp_type, "%s", \ -- _guidstr); \ -+ _guidstr); \ - } \ - _rc; \ - }) -diff --git a/src/guid.c b/src/guid.c -index 306c9ff..3156b3b 100644 ---- a/src/guid.c -+++ b/src/guid.c -@@ -31,7 +31,7 @@ - extern const efi_guid_t efi_guid_zero; - - int NONNULL(1, 2) PUBLIC --efi_guid_cmp(const efi_guid_t *a, const efi_guid_t *b) -+efi_guid_cmp(const void * const a, const void * const b) - { - return memcmp(a, b, sizeof (efi_guid_t)); - } -diff --git a/src/include/efivar/efivar.h b/src/include/efivar/efivar.h -index 316891c..ad6449d 100644 ---- a/src/include/efivar/efivar.h -+++ b/src/include/efivar/efivar.h -@@ -128,7 +128,7 @@ extern int efi_symbol_to_guid(const char *symbol, efi_guid_t *guid) - - extern int efi_guid_is_zero(const efi_guid_t *guid); - extern int efi_guid_is_empty(const efi_guid_t *guid); --extern int efi_guid_cmp(const efi_guid_t *a, const efi_guid_t *b); -+extern int efi_guid_cmp(const void * const a, const void * const b); - - /* import / export functions */ - typedef struct efi_variable efi_variable_t; -diff --git a/src/ucs2.h b/src/ucs2.h -index dbb5900..edd8367 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -23,16 +23,21 @@ - (((val) & ((mask) << (shift))) >> (shift)) - - static inline size_t UNUSED --ucs2len(const uint16_t * const s, ssize_t limit) -+ucs2len(const void *vs, ssize_t limit) - { - ssize_t i; -- for (i = 0; i < (limit >= 0 ? limit : i+1) && s[i] != (uint16_t)0; i++) -+ const uint16_t *s = vs; -+ const uint8_t *s8 = vs; -+ -+ for (i = 0; -+ i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -+ i++, s8 += 2, s++) - ; - return i; - } - - static inline size_t UNUSED --ucs2size(const uint16_t * const s, ssize_t limit) -+ucs2size(const void *s, ssize_t limit) - { - size_t rc = ucs2len(s, limit); - rc *= sizeof (uint16_t); -@@ -69,10 +74,11 @@ utf8size(uint8_t *s, ssize_t limit) - } - - static inline unsigned char * UNUSED --ucs2_to_utf8(const uint16_t * const chars, ssize_t limit) -+ucs2_to_utf8(const void * const voidchars, ssize_t limit) - { - ssize_t i, j; - unsigned char *ret; -+ const uint16_t * const chars = voidchars; - - if (limit < 0) - limit = ucs2len(chars, -1); -@@ -124,10 +130,12 @@ ucs2_to_utf8(const uint16_t * const chars, ssize_t limit) - } - - static inline ssize_t UNUSED NONNULL(4) --utf8_to_ucs2(uint16_t *ucs2, ssize_t size, int terminate, uint8_t *utf8) -+utf8_to_ucs2(void *ucs2void, ssize_t size, int terminate, uint8_t *utf8) - { - ssize_t req; - ssize_t i, j; -+ uint16_t *ucs2 = ucs2void; -+ uint16_t val16; - - if (!ucs2 && size > 0) { - errno = EINVAL; -@@ -162,10 +170,13 @@ utf8_to_ucs2(uint16_t *ucs2, ssize_t size, int terminate, uint8_t *utf8) - val = utf8[i] & 0x7f; - i += 1; - } -- ucs2[j] = val; -+ val16 = val; -+ ucs2[j] = val16; -+ } -+ if (terminate) { -+ val16 = 0; -+ ucs2[j++] = val16; - } -- if (terminate) -- ucs2[j++] = (uint16_t)0; - return j; - }; - --- -2.20.1 - diff --git a/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch b/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch new file mode 100644 index 0000000000..f136bf2cd3 --- /dev/null +++ b/package/efivar/0003-efivar-isolate-makeguids-host-tool-build.patch @@ -0,0 +1,48 @@ +From b069a48abd62a669851b9c3b501d579748dab0fd Mon Sep 17 00:00:00 2001 +From: Erico Nunes +Date: Mon, 3 Oct 2022 18:16:55 +0200 +Subject: [PATCH] efivar: isolate makeguids host tool build + +efivar build includes a 'makeguids' host tool which is normally built by +distributions during the package build step. This is unfortunately not +written with cross-compilation in mind, since it needs to build for the +host architecture, including the build of object files which it then +assumes can be linked into the target library. +To make the packaging process simpler for a cross-compilation system +like Buildroot, separate the 'makeguids' tool build to an explicit make +target and remove target build dependencies from it. +This way, Buildroot can build the tool separately in a host build step +and the target build step can then be straightforward. + +Signed-off-by: Erico Nunes +--- + src/Makefile | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +diff --git a/src/Makefile b/src/Makefile +index 0e423c4..82c59c2 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -68,7 +68,6 @@ makeguids : LDFLAGS=$(HOST_LDFLAGS) + makeguids : CCLDFLAGS=$(HOST_CCLDFLAGS) + makeguids : $(MAKEGUIDS_OBJECTS) + +-$(MAKEGUIDS_OUTPUT) : makeguids + $(MAKEGUIDS_OUTPUT) : guids.txt + @set -e ; \ + missing=no ; \ +@@ -81,9 +80,9 @@ $(MAKEGUIDS_OUTPUT) : guids.txt + if [ "$${missing}" != "no" ]; then \ + exit 1 ; \ + fi +- ./makeguids $(LD_DASH_T) guids.txt guid-symbols.c include/efivar/efivar-guids.h guids.lds ++ makeguids $(LD_DASH_T) guids.txt guid-symbols.c include/efivar/efivar-guids.h guids.lds + +-prep : makeguids $(GENERATED_SOURCES) ++prep : $(GENERATED_SOURCES) + + $(LIBEFIVAR_OBJECTS) $(LIBEFIBOOT_OBJECTS) : prep + +-- +2.37.3 + diff --git a/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch b/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch deleted file mode 100644 index b103e975a3..0000000000 --- a/package/efivar/0004-Fix-another-error-of-Werror-address-of-packed-member.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0dad6d78a7fb5f6c5fb4a1d646040539db6cf865 Mon Sep 17 00:00:00 2001 -From: Chih-Wei Huang -Date: Tue, 26 Feb 2019 18:42:20 +0800 -Subject: [PATCH] Fix another error of -Werror=address-of-packed-member - -Android 9 clang complains: - -external/efivar/src/dp-message.c:367:24: error: taking address of packed member '' of class or structure 'efidp_infiniband' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member] - (efi_guid_t *)&dp->infiniband.ioc_guid); - ^~~~~~~~~~~~~~~~~~~~~~~ -external/efivar/src/dp.h:76:19: note: expanded from macro 'format_guid' - memmove(&_guid, guid, sizeof(_guid)); \ - ^~~~ -1 error generated. - -Since commit c3c553d the fifth parameter of format_guid() is treated as -a const void *. The casting is unnecessary. - -Signed-off-by: Chih-Wei Huang -[james.hilliard1 at gmail.com: backport from upstream commit -0dad6d78a7fb5f6c5fb4a1d646040539db6cf865] -Signed-off-by: James Hilliard ---- - src/dp-media.c | 3 +-- - src/dp-message.c | 2 +- - 2 files changed, 2 insertions(+), 3 deletions(-) - -diff --git a/src/dp-media.c b/src/dp-media.c -index 96a576f..be691c4 100644 ---- a/src/dp-media.c -+++ b/src/dp-media.c -@@ -46,8 +46,7 @@ _format_media_dn(char *buf, size_t size, const_efidp dp) - break; - case EFIDP_HD_SIGNATURE_GUID: - format(buf, size, off, "HD", "GPT,"); -- format_guid(buf, size, off, "HD", -- (efi_guid_t *)dp->hd.signature); -+ format_guid(buf, size, off, "HD", dp->hd.signature); - format(buf, size, off, "HD", - ",0x%"PRIx64",0x%"PRIx64")", - dp->hd.start, dp->hd.size); -diff --git a/src/dp-message.c b/src/dp-message.c -index 9f96466..6b8e907 100644 ---- a/src/dp-message.c -+++ b/src/dp-message.c -@@ -364,7 +364,7 @@ _format_message_dn(char *buf, size_t size, const_efidp dp) - dp->infiniband.port_gid[1], - dp->infiniband.port_gid[0]); - format_guid(buf, size, off, "Infiniband", -- (efi_guid_t *)&dp->infiniband.ioc_guid); -+ &dp->infiniband.ioc_guid); - format(buf, size, off, "Infiniband", - ",%"PRIu64",%"PRIu64")", - dp->infiniband.target_port_id, --- -2.20.1 - diff --git a/package/efivar/0005-ucs2.h-remove-unused-variable.patch b/package/efivar/0005-ucs2.h-remove-unused-variable.patch deleted file mode 100644 index a814043ce8..0000000000 --- a/package/efivar/0005-ucs2.h-remove-unused-variable.patch +++ /dev/null @@ -1,35 +0,0 @@ -From fdb803402fb32fa6d020bac57a40c7efe4aabb7d Mon Sep 17 00:00:00 2001 -From: Javier Martinez Canillas -Date: Tue, 5 Mar 2019 17:23:24 +0100 -Subject: [PATCH] ucs2.h: remove unused variable - -The const uint16_t pointer is not used since now the two bytes of the -UCS-2 chars are checked to know if is the termination of the string. - -Signed-off-by: Javier Martinez Canillas -Signed-off-by: Peter Korsgaard ---- - src/ucs2.h | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/src/ucs2.h b/src/ucs2.h -index edd8367..e0390c3 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -26,12 +26,11 @@ static inline size_t UNUSED - ucs2len(const void *vs, ssize_t limit) - { - ssize_t i; -- const uint16_t *s = vs; - const uint8_t *s8 = vs; - - for (i = 0; - i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -- i++, s8 += 2, s++) -+ i++, s8 += 2) - ; - return i; - } --- -2.20.1 - diff --git a/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch b/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch deleted file mode 100644 index 00b20332ef..0000000000 --- a/package/efivar/0006-ucs2.h-fix-logic-that-checks-for-UCS-2-string-termin.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 4e04afc2df9bbc26e5ab524b53a6f4f1e61d7c9e Mon Sep 17 00:00:00 2001 -From: Javier Martinez Canillas -Date: Tue, 5 Mar 2019 17:23:32 +0100 -Subject: [PATCH] ucs2.h: fix logic that checks for UCS-2 string termination - -Currently the loop to count the lenght of the UCS-2 string ends if either -of the two bytes are 0, but 0 is a valid value for UCS-2 character codes. - -So only break the loop when 0 is the value for both UCS-2 char bytes. - -Signed-off-by: Javier Martinez Canillas -Signed-off-by: Peter Korsgaard ---- - src/ucs2.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/ucs2.h b/src/ucs2.h -index e0390c3..fd8b056 100644 ---- a/src/ucs2.h -+++ b/src/ucs2.h -@@ -29,7 +29,7 @@ ucs2len(const void *vs, ssize_t limit) - const uint8_t *s8 = vs; - - for (i = 0; -- i < (limit >= 0 ? limit : i+1) && s8[0] != 0 && s8[1] != 0; -+ i < (limit >= 0 ? limit : i+1) && !(s8[0] == 0 && s8[1] == 0); - i++, s8 += 2) - ; - return i; --- -2.20.1 - diff --git a/package/efivar/efivar.hash b/package/efivar/efivar.hash index 132022bf67..827b46baa4 100644 --- a/package/efivar/efivar.hash +++ b/package/efivar/efivar.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 74c52b4f479120fb6639e753e71163ba3f557a7a67c0be225593f9f05b253f36 efivar-37.tar.gz +sha256 e3bbde37238bd47af1fcf270dc0ef1f4be030d86364c917b93669222ec52bbea efivar-38.tar.gz sha256 91df770634adc2755e78cae33a0d01e702ce2f69046408ae93d0d934ff29691b COPYING diff --git a/package/efivar/efivar.mk b/package/efivar/efivar.mk index 8708057b18..8b1d338bec 100644 --- a/package/efivar/efivar.mk +++ b/package/efivar/efivar.mk @@ -4,31 +4,44 @@ # ################################################################################ -EFIVAR_VERSION = 37 +EFIVAR_VERSION = 38 EFIVAR_SITE = $(call github,rhboot,efivar,$(EFIVAR_VERSION)) EFIVAR_LICENSE = LGPL-2.1 EFIVAR_LICENSE_FILES = COPYING EFIVAR_INSTALL_STAGING = YES +EFIVAR_DEPENDENCIES = host-efivar # -fPIC is needed at least on MIPS, otherwise fails to build shared # -library. +# SUBDIRS is redefined so it skips building docs. +# LD_DASH_T is redefined as the linker detection does not seem to +# work properly for cross-compilation. EFIVAR_MAKE_OPTS = \ libdir=/usr/lib \ - LDFLAGS="$(TARGET_LDFLAGS) -fPIC" + LDFLAGS="$(TARGET_LDFLAGS) -fPIC" \ + TOPDIR=$(@D) \ + SUBDIRS=src \ + LD_DASH_T=-T -define EFIVAR_BUILD_CMDS +define HOST_EFIVAR_BUILD_CMDS # makeguids is an internal host tool and must be built separately with # $(HOST_CC), otherwise it gets cross-built. $(HOST_MAKE_ENV) $(HOST_CONFIGURE_OPTS) \ CFLAGS="$(HOST_CFLAGS) -std=gnu99" \ - $(MAKE) -C $(@D)/src gcc_cflags= makeguids + TOPDIR=$(@D) CFLAGS_GCC= \ + $(MAKE) -C $(@D)/src makeguids +endef +define EFIVAR_BUILD_CMDS $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ - AR=$(TARGET_AR) NM=$(TARGET_NM) RANLIB=$(TARGET_RANLIB) \ $(EFIVAR_MAKE_OPTS) \ all endef +define HOST_EFIVAR_INSTALL_CMDS + $(INSTALL) -D -m 0755 $(@D)/src/makeguids $(HOST_DIR)/usr/bin/makeguids +endef + define EFIVAR_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D) \ $(EFIVAR_MAKE_OPTS) \ @@ -44,3 +57,4 @@ define EFIVAR_INSTALL_TARGET_CMDS endef $(eval $(generic-package)) +$(eval $(host-generic-package)) From thomas.petazzoni at bootlin.com Thu Oct 6 20:12:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:12:36 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: <20221004143943.1456694-1-nunes.erico@gmail.com> References: <20221004143943.1456694-1-nunes.erico@gmail.com> Message-ID: <20221006221236.7dd6580a@windsurf> On Tue, 4 Oct 2022 16:39:42 +0200 Erico Nunes wrote: > Drop backported patches and rebase the ones that are still relevant. > > From version 37 to 38, there is a new build system in place, which is > still custom Makefiles. > This introduces a host-efivar package to account for the 'makeguids' > tool. Previously it was not too cumbersome to work around building that > tool for the host, but with the new build system it is increasingly > coupled with the target build that the least hacky way to work around it > is with a host package and a Makefile patch. > > Signed-off-by: Erico Nunes I've applied both, but I'm not super fan of the Buildroot-specific patch in efivar to not build makeguids. Would it be possible to work with the upstream efivar community to find a suitable solution to this issue? Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From gwenj at trabucayre.com Thu Oct 6 20:13:40 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Thu, 6 Oct 2022 22:13:40 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <20221006215057.49eec773@windsurf> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> Message-ID: <20221006221340.45c07636@x230_1.trabucayre.com> Hello, On Thu, 6 Oct 2022 21:50:57 +0200 Thomas Petazzoni wrote: > Hello, > > On Thu, 6 Oct 2022 10:27:57 +0200 > Gwenhael Goavec-Merou wrote: > > > - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, > > bindings and python wrappers are produces using pybind: this why > > python-pybind is a buildtime dependency. This one is a stagging only > > package (nothing installed into target directory -> no select > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES is > > updated with python-pybind). > > I am sorry, but this still doesn't make any sense, and will in fact > cause build failures. A package cannot have a target package in its > _DEPENDENCIES variable without selecting it. > > If python-pybind is needed at build time on the host, then > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > needs to be done in Config.in. > > If python-pybind is needed on the target, then two options: > > (1) It's needed only at runtime => it should be selected in Config.in. > > (2) It's needed at build-time => it should be selected in Config.in > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd > like to see a serious justification, because it is really uncommon to > have target Python packages be build-time dependencies. > I'm totally agree: gnuradio needs host-python-pybind. In fact pybind package is not really clear to me: - there is no host-python-pybind - python-pybind is used to populate staging (PYTHON_PYBIND_INSTALL_STAGING = YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET = NO) If I remember well (but unable to find thread) one of previous bump has required a long discussion with as result this status: maybe guillaume (in CC) could help to clarify situation. > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com Regards, Gwenhael From thomas.petazzoni at bootlin.com Thu Oct 6 20:13:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:13:36 +0200 Subject: [Buildroot] [git commit] package/python-remi: add license file and license hash Message-ID: <20221006201401.8E22D86ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66d29ddf531059aa0ae9e1f2c528e905d3f7168b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since the release 2021.3.2, a LICENSE file is shipped with the archive from pypi.org. Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Thomas Petazzoni --- package/python-remi/python-remi.hash | 2 ++ package/python-remi/python-remi.mk | 1 + 2 files changed, 3 insertions(+) diff --git a/package/python-remi/python-remi.hash b/package/python-remi/python-remi.hash index 82234bbe98..e7937c3914 100644 --- a/package/python-remi/python-remi.hash +++ b/package/python-remi/python-remi.hash @@ -1,2 +1,4 @@ # sha256 from https://pypi.org/pypi/remi/json sha256 542df88e174bbd58fe763c49e5c2116f2c8413c1a934731069ed8c17bb9cd64c remi-2022.7.27.tar.gz +# Locally computed sha256 +sha256 3df7d3ad8904d7e99fc0810366483a7cbe5a43c13f7f913f1d7e5023f2ff7657 LICENSE diff --git a/package/python-remi/python-remi.mk b/package/python-remi/python-remi.mk index 7e43c09b00..419a3441a7 100644 --- a/package/python-remi/python-remi.mk +++ b/package/python-remi/python-remi.mk @@ -9,6 +9,7 @@ PYTHON_REMI_SOURCE = remi-$(PYTHON_REMI_VERSION).tar.gz PYTHON_REMI_SITE = https://files.pythonhosted.org/packages/b7/5c/fca9d9273fc9d5f4ca0bc2f387ca19f8ba9979dcb75617d094e575dc2337 PYTHON_REMI_LICENSE = Apache-2.0 +PYTHON_REMI_LICENSE_FILES = LICENSE PYTHON_REMI_SETUP_TYPE = setuptools $(eval $(python-package)) From thomas.petazzoni at bootlin.com Thu Oct 6 20:14:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 6 Oct 2022 22:14:04 +0200 Subject: [Buildroot] [PATCH] package/python-remi: add license file and license hash In-Reply-To: <1664784963-61534-1-git-send-email-gwenj@trabucayre.com> References: <1664784963-61534-1-git-send-email-gwenj@trabucayre.com> Message-ID: <20221006221404.376031b4@windsurf> On Mon, 3 Oct 2022 10:16:03 +0200 Gwenhael Goavec-Merou wrote: > From: Gwenhael Goavec-Merou > > Since the release 2021.3.2, a LICENSE file is shipped with the archive from > pypi.org. > > Signed-off-by: Gwenhael Goavec-Merou > --- > package/python-remi/python-remi.hash | 2 ++ > package/python-remi/python-remi.mk | 1 + > 2 files changed, 3 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From giulio.benetti at benettiengineering.com Thu Oct 6 20:14:19 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 6 Oct 2022 22:14:19 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> Message-ID: Hi Wolgang, thanks for contributing! Something to deal with. Before 'git send-email...' do you use buildroot/get-developers script? I ask this because I'm not in Cc but I maintain this package as well as other 2 people. Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: > UDisks2 provides an Library API [1] for accessing the UDisks2 service via > "libudisks2.so". For development of UDisks2 clients, install to staging > as well! This issue has been reported as bug [2] as well. It doesn't make sense that this has been reported as a bug since it's not a bug but an adding. So please remove last sentence. > [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] > [2] https://bugs.busybox.net/show_bug.cgi?id=15026 And this line ^^^ too. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > > Signed-off-by: Wolfgang Grandegger > --- > ?package/udisks/udisks.mk | 1 + > ?1 file changed, 1 insertion(+) > > diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk > index 2bf519a2cc..959333d01f 100644 > --- a/package/udisks/udisks.mk > +++ b/package/udisks/udisks.mk > @@ -10,6 +10,7 @@ UDISKS_SITE = > https://github.com/storaged-project/udisks/releases/download/udisk > ?UDISKS_LICENSE = GPL-2.0+ > ?UDISKS_LICENSE_FILES = COPYING > ?UDISKS_CPE_ID_VENDOR = freedesktop > +UDISKS_INSTALL_STAGING = YES > > ?UDISKS_DEPENDENCIES = \ > ???? host-pkgconf \ From thomas.petazzoni at bootlin.com Fri Oct 7 06:33:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 07 Oct 2022 06:33:22 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-06 Message-ID: <20221007063329.78144417BE@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-06 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 1 | 0 | 4 | 2022.05.x | 10 | 15 | 0 | 25 | 2022.08.x | 13 | 14 | 1 | 28 | master | 179 | 381 | 2 | 562 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 27 igd2-for-linux-2.1 | 22 systemd-250.4 | 22 host-sentry-cli-1.59.0 | 21 crun-1.5 | 17 libarchive-3.6.1 | 16 sysvinit-2.99 | 15 host-f2fs-tools-1.15.0 | 13 host-go-1.19.1 | 13 host-binutils-2.38 | 10 linux-5.17.15 | 10 autofs-5.1.8 | 9 elfutils-0.186 | 8 package/acpica/acpica.mk:40... | 7 gensio-2.5.5 | 6 libglib2-2.72.3 | 6 btrfs-progs-5.16.2 | 5 lxc-4.0.12 | 5 perl-5.34.1 | 5 frr-8.3.1 | 4 gobject-introspection-1.72.0 | 4 hdparm-9.63 | 4 host-gcc-final-11.3.0 | 4 toolchain-external-codescap... | 4 dash-0.5.11.5 | 3 gerbera-1.10.0 | 3 libgpg-error-1.45 | 3 unknown | 3 acpica-legal-info | 2 brltty-6.4 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 dieharder-3.31.1 | 2 dropbear-2022.82 | 2 efivar-37 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 gobject-introspection | 2 gsl-2.6 | 2 host-gdb-arc-2020.09-releas... | 2 host-pahole-73383b3a39afe86... | 2 kvmtool-f77d646ba01d04be5aa... | 2 libp11-0.4.12 | 2 linux-5.10.109-cip5-rt4 | 2 package/acpica/acpica.mk:41... | 2 ulog-0389d243352255f6182326... | 2 yajl-2.1.0 | 2 acpitool-0.5.1 | 1 afboot-stm32-3566acd582e553... | 1 augeas-1.12.0 | 1 bat-0.19.0 | 1 bayer2rgb-neon-15feb1115b48... | 1 bitcoin-0.21.2 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 containerd-1.6.8 | 1 dahdi-linux-5c840cf43838e06... | 1 ding-libs-0.6.2 | 1 dmalloc-5.6.5 | 1 docker-proxy-f6ccccb1c082a4... | 1 e2fsprogs-1.46.5 | 1 edk2-edk2-stable202102 | 1 fftw-quad-3.3.8 | 1 file-5.41 | 1 flare-engine-1.12 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gocryptfs-2.2.1 | 1 google-breakpad-c85eb4a59b6... | 1 grep-3.7 | 1 grpc-1.49.1 | 1 host-binutils-2.39 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-10.4.0 | 1 host-runc-1.1.4 | 1 host-rust-1.64.0 | 1 igh-ethercat-1.5.2 | 1 jemalloc-5.3.0 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgeos-3.11.0 | 1 libmdbx-0.11.11 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 libsepol-3.3 | 1 linux-5.10.115-cip7 | 1 linux-5.10.145-cip17-rt7 | 1 linux-tools | 1 lpc32xxcdl-2.11 | 1 lshw-d76afbaaf40e953243da92... | 1 ltp-testsuite-20220930 | 1 lzo-2.10 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mender-3.3.0 | 1 mosquitto-2.0.15 | 1 mtd-2.1.3 | 1 mxs-bootlets-10.12.01 | 1 ndisc6-1.0.5 | 1 ocf-linux-20120127 | 1 openssh-9.0p1 | 1 openvmtools-11.3.5-18557794 | 1 perl-net-ssleay-1.85 | 1 php-8.1.9 | 1 procps-ng-3.3.17 | 1 python-numpy-1.21.2 | 1 qt5base-2ffb7ad8a1079a0444b... | 1 qt6base-6.3.2 | 1 sdl-1.2.15 | 1 skalibs-2.10.0.3 | 1 tcf-agent-1.7.0 | 1 tealdeer-1.5.0 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 wavemon-0.9.4 | 1 wtfutil-0.41.0 | 1 x264-baee400fa9ced6f5481a72... | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/bfaf1f3838a7ae2c572a02155f68a6dd1c07196c | mips64el | acpica-legal-info | NOK | http://autobuild.buildroot.net/results/012c3c8f509b71c830366e31cb42bfedaabfd5e1 | mips64 | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/9a41cab40b211a3c6b554b71189b220eb6010e47 | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/ce93876f18030fc1d2337349e363f7b1905002ab | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/4b18e749216bc6308b6266caa33ce3e2e2ca8f15 | ORPH sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1cf0418e02f44e0b8e1f2fa3ffd452f0c12cfd4e | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4422d55fe870517a7b7d39c50d29890b8970591a | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9ed6db3ce3a87666a42c8b5cb86ee24f8dfa5ac5 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8abe03cc0c154e2fc5e883be35bebd852164b190 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e15e391668fd05e8b41a30b4bcbd6dab4ea6c26a | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/33b9433c918e77d2cfd28eee6b4ba91ad9e3c705 | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e198441f70ac759dde3a6eba3a5cc043731c71a5 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8db57f3efc0594718ff80aa42fd5bae5897d9c58 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/682e234b091a5d9f35b24125dbe6881e63c6eec8 | mips | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/be801748f3b81ca4e61fe52e0c149f70af7dcba8 | aarch64 | bayer2rgb-neon-15feb1115b48... | NOK | http://autobuild.buildroot.net/results/8f081876931a29b72720b3326ff07b5041792145 | microblazeel | bitcoin-0.21.2 | NOK | http://autobuild.buildroot.net/results/113b12c5e82d91ca3c9d6512ae5f32e29f021e2f | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/295a169821997c7bf2666a432b13e048db2847d9 | powerpc64le | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/02109ec6ffbbc60823e7e5ed01fa514d5aa1da71 | ORPH mipsel | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/129caaf40c913a15f1dcb64ff25d41ea32c0816a | powerpc | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/2d91a9ae678a21f0c2a0e7040af3d151fef465a6 | microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cdc7eca962956805fb07544a58a02d36d435ac73 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd9b0460e7cb2bbf12b17908a1be586561aa7f23 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/3edab9d49ab0496716cf88ee2674b364ea666f50 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a635158433a174b2bbd1d0d8f30175104a1441e5 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0f3da0e37bc365a8bd302739a51829ce4d1b6e3e | ORPH i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5b69dc6ee12ae34f63db0689bffbfaef2c4e9032 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/87f13b3dd7999c4ff504409443ae36f7c159905e | powerpc64le | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/9c25cf1e85e87338da40f7b9234dfcc81f8c30e6 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5ea8a1076e3bae9f3b26f9c6e5d62603bd063136 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/291be26b79c15f28a9e738bc3e9422c1a6c19bf9 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0699db007766e409f1401ce57e9785b8c5b1971 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5d05b2c884ce2b16a71284510251d32500193506 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c60893f4ca18a5d36e8103ef64392688c3b82be | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bb5fa6d5919f4e056b05b776f62286d4bed57619 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/55107d76cbb6f2ebdf7f4d82cd7768f98f549014 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/061b3e9ff2776dd639063c62ea11641f2c6fb0d1 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/75247fdeb61f37ce145e29e1edbe6a6a4ad5c00c | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/57a8549eca11de84c6028021d907ab8942da501c | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/950cf9a88b939859337fa75b139ad7afd675c364 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fd8c348a5d75ddd3072669cd01cbdc452bb3e2cf | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/94990c50f2f9d8237ec12bfa954f40eb3e349c9d | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7cdcfd61c77eafb49fc84ca720a533ab524f3f10 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05863675d545fb8fc0340e01e1d1653acb6facde | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d7de16ae5970b81374a4b658da8bb0271598d4b1 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6daa408df6beb586cf19316c463f2c8fba138d95 | arc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/0f084133619709b8220e46bc5364cc465b2bb98e | sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f63ad068952eca53cf0da7d1c6d0f784ce8f4f49 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/ad7a562abeb6946ca1bd74b86e7b4dbb35cfbd04 | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bc582e6eb6741a5c5bafd10a23c9953f25a8916e | ORPH microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/f037ad3945e41a4ad93cfb647fb3578f554cc96a | microblaze | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/17fddde63589db9d7cb467c504c6a40cb37543bf | arceb | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/dad204ab9357406b284cd53ab410a48199e787cf | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/77c2b2eb11f6e317f8c626dd844f419406c3680b | ORPH x86_64 | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/fd3d722a661b76cbec94d884440680fe09257f1e | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/25aace9ebf60a0c9087f137fcb1cf0f1c27129e5 | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/c3970e0fdb1c25c6519bb27c823c401b8e8b0c23 | or1k | e2fsprogs-1.46.5 | NOK | http://autobuild.buildroot.net/results/1fbfa7c07fe71bd6dcf29e4a726e774dc2071272 | ORPH i686 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/3b87af804c7aa66bf955c51ba1468cdc360d54ad | mips64el | efivar-37 | NOK | http://autobuild.buildroot.net/results/efc147212b08495f86aa8210f21278d661c008f4 | aarch64 | efivar-37 | NOK | http://autobuild.buildroot.net/results/7bef90817702e80f278394bf683c95e57475d7d6 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/061005b94d5d44299bd970d4b9037b478f49402e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/392e0a362105534a9ad1f6786ce12268e854e93e | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/66729456c555f8119f5ebd36d12c8fd3d7eccff7 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6c3387c9216b0d8b9850bdf280ff077a0dd4e321 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fe79f88438d5b2f3f370d63af78fbd132c052136 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2b8088f8b9fe70ca7f8cffc21bfa654215d9822a | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/d8f6a0919142144a11bfb1143ac0f6c2d7043bad | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/1249756fb164b05d55fab700e6fc21858254ca87 | ORPH powerpc64 | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/de6631a3ef18a010217f489c5a7af8a7060396c0 | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/7be7d3a62b413eb0039b99f33e259ad4e908af24 | ORPH mips64 | flare-engine-1.12 | NOK | http://autobuild.buildroot.net/results/367686c5524708657e6711230ad0a4a2210d4a29 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/cf10d3934a3e7e557f83cbe7e3637abaf0cf413e | ORPH microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/f98fee83a9f9e1e9553036bed92d391c3afa5da6 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/c0b390b66776ab37a9eaebd5940ff8182631c8f5 | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/77ca91268bbb4e03faf4b1e58749edf64120c18c | arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/cf4a2b87004476f0f2bea05ca87c8253f2693233 | arceb | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/40213e526976a1febb64db8613b0f4d6ed031a25 | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/6cea99ec0153c425d2d840ae2a7d54e38d2e2105 | arm | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/5460241191798fccf876c2961345901ec3a53791 | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/d6b354ce5a6f9af13b95ed36b7efecc3822249ad | i586 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/210c2732131f63e4d9edcefadf89ed35a93012da | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fc3e072fa8fad694cc6006bd5ecc952b19aaf7be | xtensa | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/7b8f9d5c9de85a8fb90100267077ce499f1d0b4d | i686 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/cbedddc2147c0e4cd1243cb36ae9fbe706503254 | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/2c02b8f06eb45c315711c03c364bae0464a27993 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e7f1eb992fc9461f338b3ee9e4144ee083c99ca4 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/43f6b232cf5e3cf479b8bc83919b85ae460f3e35 | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/c0c11fc6409fd602b5f48491ececbaa8d7090316 | s390x | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a09e901365dc3affc69e57afbb202c058c288010 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d162b4586c76383eab2b7b5ba6b01993ac39daaa | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/861097e395bc6c36d1727560161bc33eca795e1b | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/da921a379427c3e2713e32881c32fe20964a6772 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b58dbc39b54985d4e9facdacb2d6aabc0019fe84 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2aa800295da24da65ded5d2fb4a4dd4d8f80b0 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8fbd019e1f7c4f12eda24ed886963514e86a350 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc824716d0a5ca70dca49865201bd9c01196acf3 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92f5f1436cf6d188d6b599a7b6983018d2fe517e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8de9fc43ee33658b5af91817925fc700259812d5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/790b699e704d03382d0fcacbf8d35e61384a24ea | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7d472691e7126ce523304f4b647c6fb79cb8ea9 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e52b0159e001585e76540515363fd31b00789021 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f232b398519c6e8a79b316efc1c8af88fc762b7f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/859799663c9fdc903590fd02031efdda6e50f100 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfd13a675eefc32ec799b6cd6a90e07df8dc4518 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1fe26adeb67bb9bcaf3553434a688e3461262ae | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/090b3febb43aa49644960920078010acf2191b3f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0f0c6b689e1b32818a1f4a70227b45e3b8d67f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a779bf694f31b4e7ee0a9a93881cd1b22f42a2b6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0eca37fc9594e7cc7e60ad7766e034b472f1fab6 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2713e3144daaf35de742e44cb45170d9096e36a7 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b40cecaeaf270eb7475470e7dac5c9f359417ce8 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a420d38fb14c61268b32f9a44eed3bcf07efb5c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/643c134f89bdea046d70d2d126d92265f7bb6570 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2aac745b4cdd4ed3699cba42cf08d3e86dc5b667 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b169c1af5428af3b38e2e89042fcdb45d03e3ed6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/917f33b0e6cde2a5b96fd3aa96704aa356fe924f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fd9c763558da852819159b0fab8653643ee66b9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/762cdb2231fd9b56b64fdf3d6d12b2a43f3da6fc | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/997cd7fd5ce1b968c7ffb3f3c56d71ec421d652a | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/90c49b8a0636cbbadea25a00d55b0d29a939fd01 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/790d9be7d0225f9a907bd16f63e56e29161b3802 | microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/b8b5a1e55116cfee6e84973721650241cb41d24f | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/70b2ed988bd83789da6359688f08713588faaf34 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/edc97ebd8b207e576ff78766516e17d36c7cdd19 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5836effc5b63e52da2ac67f62e3ae0dddb0a96fe | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/d41eb416660dc61ba8d80aae03f648775264b8da | ORPH i686 | gocryptfs-2.2.1 | NOK | http://autobuild.buildroot.net/results/53039497768789f9a142a3853acfb0bbdc84d67f | i686 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/78737d3c66ab05a2a80398c6b675e339d0a7408c | powerpc | grep-3.7 | NOK | http://autobuild.buildroot.net/results/3c381aa2a615d25343089ddd541f0b8227cc5695 | mips | grpc-1.49.1 | NOK | http://autobuild.buildroot.net/results/4cd084803cdf2b6470b15e34708094308250d857 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/63edaa4524fa30d8dad3beeb0518a47999436d3f | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/93bb95f1221af615563675be46b681b325a6d721 | ORPH s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/00550524dc9c85054a32cd5a52a54d746d6c9288 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/733a67f3f749771d687e598f117d29a5fc491d77 | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/48c5dcda9a02f2ad7a2ba34386441dde3fbdf4f8 | or1k | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/6528b8b59ea9e3a9785a143fa10e3b6d3a238730 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9e09150d5baa835ec18ef69b21f1d351c0ffdbb8 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b99d4b8467309c3449028a6aed3b8f661f1ac3ef | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a0b395176f76aa6f62648db02e8990d5a6191228 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a9c9f323ce8e2d1245f09d7c79f9ad940163ff0 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/22cd0559da19ff9ace77b4519405ea00d8a292d2 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/acd5f21c70874528738a54552dab06c1baf8450a | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/77987a06658f760e649a676ef57d09d5b41af213 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/29c9722fb92ce084c2f3fa2a6586eb66a90f0763 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fe75be51650d373a32cb0f5c661abec9fa926a74 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/dffe808722602f99cabf84ee9a128acf3dec33db | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/0c7594b382656519c90ca93044cfa49344e41979 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5e5ad45a330de2d58093b809ba0f7f543797af4c | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6f2ca63f4a92f63ddd75584b047e19fa6393bbc1 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/584e36561f64870b6a982e49e5069c207a96c773 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b77ee3baad939d88542f5fbb68c1aa4c59d48043 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ba0e8be5e1f5583faaab2c003be8cb5b37a11d04 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e1fa1e0bb91a0d84859888bcfe3252e60c46d519 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/758f1542331df4e47aff2d8b0b54b9f43899df3d | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19ff25a325564acaeaacb333af91f881b394e757 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2f3e9815f9ee6f4005656b62ca471ed41f0a5a5d | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/175dc19dd44c9419343bb356ba68b7c86da15e4e | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/407723771ec44b2429841ade8bb0f4368415c2b5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/25cd15c62710e01d39da8092f27b7217b1dff8a5 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9ce59a6d1daa08d309c3a231d0e081c21a1f9ef2 | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/898ddab7d69180bb35b019446508e807681499ce | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/edef72c79de37407167f6d04ef01383693476779 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/422ecdf1fb0e7c70c45ad6fed3000b4f5210d7fb | armeb | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/c332b8f815ec46860d34765f3fe2a2eccd6cffd2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d8d8ded19497984dfe776ecc1ff125c5ffae0183 | arc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/6f10e342881b4a11ac3a462eb79ea58de5e06865 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/b9a581cf2c5177e445a3f13b37f1a2f15dcfcdde | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/a5e6a7ee211ea1b3c46f659504959624c941e5ed | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e511041b80921ff733079413efaff30be4bc2d9d | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bbefb0aa6594614f8ddd1728de7ae5d1e8137a64 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7692411f77132c140678c45da71cad6b40180de5 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/113be27680b587fe6750328abb8797d118846ff5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0b7c3530097e41edb995775d54087c8d5494cfb9 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/117a6a721e00bc32942b5bcb10653ceea6ea5ab6 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/67c8e472bcecaaf3ca4fc15ff0824e06d9885198 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f3ad2f1b0d9a6f0648c86dfd8f71a206a349374c | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9206ea5c9ce4a4cad907dde671a581156f86c584 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0fec719ec8b283da2bbd1134701bcb502c1bddd1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3473a56ef4fba1b0f4be9a08581f9e7cb5b3d054 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1c2af3eda3537c6f674e76d2f6cb31c876603543 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/56ba71f7e7bc4b294997db712081c2522695e834 | i486 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7e15e65ac4dff2b8f59bb715b17db8c2b4cf138a | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2a86dce7741d28fda6956652bdbf0ec105b8a9f3 | arm | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/e38bcf4dd2bbb4234d78ae4f8a158d89358ea753 | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6a09d5dac9291b5218db7c1bb63e94b342c7e427 | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/226b8e8e6c28312851fa19bfd0d4aeadce1fe368 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4157cb724b48f420e52cfc98fde52be59ed8d096 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/90840716914760b9bef6e70f02d0997f5fff8e4e | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bb52f69115f75c3f26ef2cbeeb05811fb5ebd927 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/553ab800b0f9c0e155a7e6dd445d217d3a9b2d8f | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3b247d7b6d093b45168613eb40b0c3fc26e8f02 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e6424097dfd79b3b72552ae0709aa255cad82653 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c9a1d41b5e151687b5d6579b7b991f31ae095aba | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5db0c228495b12e243ef17662e21739ea4a7d2c3 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/65671334f9d98871a58bf136d5c9fc08aa4fb034 | sh4a | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e1cf5883ae7247788cb5d0d7fd8d5f3215d44df6 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/105a313796c8226c84ac2942822abd0513c84ca3 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fee3501165d11b58c86dab56c7da63dada842bf8 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/98a3ea40f58b6c300a831a9d46ccbd794b60eaac | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0cf7d6bace2431d416980040541b2f7d08239c43 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d650af6285e2a5b9234a3efd0b00f7396dfd3cf | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/61e79327e461e9b1bd86e9147d4fbf63f56ed718 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e95fa301631aa497b17c4d442b9432b2b0249568 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a9aa72b5d4ef9adf784a07451c510808f71d112e | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/048a95dd5c053270b81282ef1881c641a16ccfdb | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c6e5c309096a89654d8dd3f3626729260f3d384 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9beaaf3990be017255ba33a0f511c20c3bb9c9fd | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bcbc4b19744f26316a421701c2b6c097c7447f5 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2bee3e57965bd3b6dcf948512f170d411cc4c0b1 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a808bbf2f7df69b3e760d9e019cf068bff88a45f | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f9c7f84f53bdb7aa19b5b4f51f3eaf35939d57ce | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/34d8ecc798686544ccb7c7d8b1a0b5757cea30ea | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6c8115a9956aaa7a1a955a9b3f8b3f0c4801d917 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1e33e4c1c447dfda3b9fdc1ede39f182d7578bbb | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8a586057e9e23e7be16450797ab06aa30c8484dc | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9a35728af9e17686813e2fe5465202159c104b2a | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fcc28f05f1850f1c0b83e4799736679f6b46da0c | powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1402ab85a5dbd5c73ccaf22e5456e71719e401ac | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d227c39d66a33d16529d5ebef8838fbfb0ea7f | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7b05d76a715f111d3919874cbde99affef4db772 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b4b10e1cc120d1669890be52f6dd91b966380097 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bb9a280e756c4c356f93f0507d7de22f70c6f22 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dda95b3d0ef32795fa834d21d3cc52923d23e384 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/80581c9621adc2e2f3c52190e1429b9e95429991 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/daca821110ba55797a904d037df31db03adadde4 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9aac03c94b2ba7063e1f2fbd67d169b236a11370 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/01878f7fc0c016b719c5caee5d62e6e2f422cd45 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0280a7ede9c2ee624dd400d723680362bfeca659 | sparc | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/d80aaf72d1e75f2ca94dbaf7df4acf4892d2eb43 | sh4a | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/d3e60918726803351e2d1042e3f1acb122e18a92 | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/307b34df86ae28eabd000c1a9f5eac94f0761c26 | i686 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/ce72325cb1901d712ea11d6406a314ddc722de05 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/75563649280e90811d34bbb147241292f62a018f | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2c4aa106947741da681f73475c1ea5420edb888d | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2093918db19ce5c32d3b8b87353b28000aa07b52 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1caa7e45f2c3c7dcfaf841bf7e77d9d4448634eb | i686 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/56e3c1a102369693b0e4874653276400e581aa13 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/46a52bfaddc57df37d5726b439a11cd28f64677b | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/095bc31a3629e1c4b5ce1fb9e7f2f2fa69cb82d8 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1e8daecd24a0690fa37cd73840a5299325338dfa | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b6e3115c9d250c72fd6353cf4bf5a96643c1a9d9 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/de8e2a1612e851155f6c9f418529b3dfb0947265 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5c24b014e434a666ee7fb66ef10f6ce93bd5fea3 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a430e2a74458c638cf7671da33fa8b0f48ceade1 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1e81e274b29c675c41bef5500d0e7a19326d6700 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/af7444cefafc9c7f060709e065ec485aa7ea2f43 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aea7f9bc4a505eff78938446e48e0334a36595d2 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/90dccd352d865dfdf1b9b8ea2aeb734d6677d602 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6b48495df83e51454b0164bc0909f9526ae344ee | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/8adf9cf9c2ad970a968f674e40a7df30d8d538b7 | ORPH or1k | libgeos-3.11.0 | NOK | http://autobuild.buildroot.net/results/596852ad9c7c0376707184ad501fd8e3c51c3fd3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/69ab85d1acea51852543458cbb638a787612f44f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b97dba24b34c3e077a64ba2f8bdfeb4c122f67b3 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b529717f62f405b51de8100b7a5642a00d4a3261 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e827ff7a96b1b1fad8fca7d05b61bf1d195c878c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f834e6b8dbec8b7b062f863a9be9b6789f930d16 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9e373c251650e9f0906e6962ee0d59c62d918aa9 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/53223e787c99e2b61d809c03037fd8414cca6b3d | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/66a002853d3fbb9c04f4ab60d156dbf8cb0d84cc | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f35741f19022d5baf0c97cab4fc73d9832457f84 | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/17219033c5dda2d63f2078f7eed4dd84d29c82d3 | nios2 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/409de62450d59e523ee591bb9ffda31dae28e7dc | sparc | libp11-0.4.12 | NOK | http://autobuild.buildroot.net/results/c35e0f01651a0970f923cb9408a6e64a2b8b0610 | ORPH arc | libp11-0.4.12 | NOK | http://autobuild.buildroot.net/results/e16d6da2f70b306baa289062f266ee41ddfeafa0 | ORPH riscv64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/27bdcdbedfe12ea5386a1d2740687af340c6fd57 | mips64 | libsepol-3.3 | NOK | http://autobuild.buildroot.net/results/75f3e57025e11e93bf99bc548846307b545d0054 | microblaze | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/6dfe573de5c42abe1ad5ba5cd1e9107a0c2d437e | ORPH microblaze | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/7e642a8cc703f8a61f19b82b4c9a0bd985feab50 | ORPH armeb | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/7559f3fcb316808e146bb4bf639df74ebe29288b | ORPH arc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/9c87471758d7fe71be305a91cf599cf1f28898ca | ORPH mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/f7945eee71d0e6004bfaadc722a04d18b034e3e4 | ORPH mips64 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/46bfa768268a1fa69803e0e322a89b4a75187512 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/931af925a916a11a6b45d43c362bdf916724318d | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/bdb2e684b3460840fc0227e4032e1abd8ee2eb61 | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/6fa51623e8b00b25dc98cf40be3586f51cec8e49 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9bcd33bcf3caa0e16e1895df3f85be7c8e236a2d | ORPH s390x | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/2589d27dce810cfa59f6446ce63c0b5ff8044e85 | ORPH arc | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/9df1a946bd32f7324d7922da721b60a052373b8e | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/571c050861045654c3b6db12dfba40ebf8a32264 | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/d446ef5edb2f31991384dc800002528fc498a09c | ORPH mipsel | linux-tools | NOK | http://autobuild.buildroot.net/results/56b2ad62bae7b90b1c68da1ad671b0fd8f08c0aa | ORPH armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/7e8f86eada15e7f191fc557e4be4de048a120dcd | ORPH arceb | lshw-d76afbaaf40e953243da92... | NOK | http://autobuild.buildroot.net/results/a4ac79a786fb12242c449b21ed7bcab353e9ca13 | ORPH x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/bdba3d1cf9e61cd6117b833a6f0e4c52822bc3d4 | s390x | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1e231c50de9d785a423b55c5fe3eaffcadb95e3a | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d4c95f0e0be6da6ea34e2248f116e53c8489a6e0 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9071f63b5bc1be5ad473b74383ff397448e2a411 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b60f7f5a2e7a3716a1389bbfef1f37076d9bc781 | i686 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1a56bc1a61891c2054498a04a2cf1c0174848575 | riscv64 | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/9c8add7ca5114a8fe89e3bdef91aacdf3176415b | ORPH aarch64_be | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/6749dd56808bed00e7f00ae18324517adc2f45f9 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/05433a63a4804e16340eb22c5b4ddc61fb430b7b | ORPH aarch64 | mender-3.3.0 | NOK | http://autobuild.buildroot.net/results/bf42c8a3cbc7b332047b9a79e4267f0e2885bf91 | or1k | mosquitto-2.0.15 | NOK | http://autobuild.buildroot.net/results/9be953d7b93bf9137b8ba223ec2242ca1152bf4a | sparc64 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/647abece6b60d53d71b6f9acd0ff2dd84b3128d9 | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/2cbe1423eaafa3b57b2a3e5131b6759c22ec01bc | ORPH arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/a810b1f2a1d5f37183eac6c57ebee6dacd6d7ce2 | ORPH armeb | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/ea74d4dbaaf1c1ce07e1e5f905ed490a12ff2c99 | ORPH sparc64 | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/2123f1c9123e4ed63f71de206c0945685c0fa00a | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/dcd4fce40a03edcfe981ec79e15972dfe5ea74b1 | m68k | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/e7a126e09d1b73a13bb066449df83a7d087bceee | arceb | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/6fe97716418ffd844958c58355115e70de31fa0d | mipsel | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/1ba8ea24aa3410a295264e2de28a7dd7d962e641 | arceb | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/d8b853e740c0533aa620d0004602367f8e345a81 | microblaze | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/408850c953fab13ebad0b75697599af442128921 | sparc | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/db35f52e8af5abdec868082186a51250783a0b60 | mips64el | package/acpica/acpica.mk:40... | NOK | http://autobuild.buildroot.net/results/b74b5651472fe8d43acb3b775044de641234c18c | i486 | package/acpica/acpica.mk:41... | NOK | http://autobuild.buildroot.net/results/904b893bbb2b4ab85b4408e36cbebf2b6c666550 | aarch64 | package/acpica/acpica.mk:41... | NOK | http://autobuild.buildroot.net/results/b322981c4acdade1eb61f9d9656dacc7ca697f97 | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/49dd3e37a153f1b1fb9364e6f593e3701e712719 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/43120d54bd8ca00f31052e4e24ee001552be099a | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/55ac24e70415bb06615638e385b47312f094ce95 | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/115c897ba2d1196a30262a5ac55e2ee0143368f6 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e880521252190411294a75eac996c0793469299e | arceb | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/b74159d225f807e5cf6b41656b40f86b0a77efc5 | arm | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/279477414d20ffb78ff46c08d89474dc95092436 | aarch64_be | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/07f424b16006dd1bee89a559de71abb573e6ab03 | ORPH armeb | python-numpy-1.21.2 | NOK | http://autobuild.buildroot.net/results/97f4f7b4f3c82e708baf09043a0a328598e67114 | powerpc64le | qt5base-2ffb7ad8a1079a0444b... | NOK | http://autobuild.buildroot.net/results/d246fc79a7e48a86669ce55cb864de118d736d81 | powerpc64le | qt6base-6.3.2 | NOK | http://autobuild.buildroot.net/results/a9ad1945724d450f8522eddf31fb79de0a78e71c | sh4aeb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/bf612d5075f1fa9f19f32506c397533fd10858ec | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/7ec7b580a551bf3812ea3784cdea776324a451cc | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0990caab3e6bb3fbc9f711a39b632ea08d21d88e | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ef14c5f3f1101d07f7984573b92fbf3baea36047 | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/25b34ebaaa87603b8b4f62ea6a1df4fb6b11fc17 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2a01bf99baed20629758bcddd3c09d2cc6685e19 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8ee6ff908e9447baec0692d1a3eef8bef010887d | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f071e7f0cf954d4e237d8b5fb7e91768e653cee1 | arceb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/413baab86c327550bc8ac7e3c2cb4581fb61a58b | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9e40df29b51cac353abcc101ffb0fed15a8604d9 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16af8322cbb8bb1bb6317f630d6c0676f814782f | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9f65e71254c94446648d94a03c66e69c341e035c | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b131b51f2b2d0f7503a3413e54c88700bfd3967 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/291c3dda493f4a1fd67e1dc950fa336d5ec3bfaf | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c38f2f3271568538795cd80d904c52a02ec6917e | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5b66073d9c8be56b9ec20365a3b7e82756c4a416 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/fb413bf075812e093a9eb0da55052c6fc13ba0c1 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd649711c086a1d589839da2e0c7d5acac550e2e | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/414f02cab8ff85eeef0f0364409a0296bfd3b139 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7a266111e8e00ebfd9387dfed7e06dd212dfc8bb | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5e9c7178ba1a7b10e2f756d8c1e7d517b91456e3 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/088c2682f15bb8107b45e672e371b1092a512e44 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f92fa10544e8dd585a1612968fcfad8eae654620 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/75428639d411ddc3f0b2c1dedd425f96fb6c13e8 | armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d52d3dcbad556ec23de5ee16450c402c008b93e | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/938093570e8def9f757653f55551afae4b185fae | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01ac60d7b95ba9ee85cd2688c96002176218d847 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/535a8b2d215471fca8577362ae09d2f0f609c672 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7451d97ec154aff7ee21501551b70cbfbeeb4e9f | ORPH riscv64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/00535c083fd12adaea2420b6e2039bc16bdc7551 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/be1810b1186b0ac9cf8ce0f8e4674a4d2af18818 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/05645f2eaf1299b9c7d31d5ce6439e4a916e9106 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ee5aa81a5728f5e0b5c60c8fe8579a3e7344bb31 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7980787465e4e1c4b0710cc4f8aea4aeb28d9541 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b94fd15b097a0c7be5edbc5ce06ac4835cefb2f3 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f32bc2d2240d2268d4514c940aa2a5d4fd25db22 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ffcf5180565245ee50b4a90cb3cf71d9fee55d10 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a205e87534d7d6b6b9e15e48744971268183011a | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a915519b5fbb24190b0c1b444709d618529a32ee | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/9ae779e7d7a8c403e9f79d44a161aaec5b2125ef | powerpc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d4d5404b87e762c9fb8af274c0b9ac629d51875d | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/04f8d1f94aabc49e148125cd9d61074a87c94fd1 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b3a6892865051f8f39b2ab897a0818c3c463fd43 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/6aeb323fca80e05bf0392cadcc22b9c0cfa14f16 | ORPH mips64el | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/604501e99095139bc40553b8e9410424a4e9f45a | ORPH xtensa | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7f382507c4ec2b2b51991ecfdbde9a01689cc99f | s390x | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/846a113e9194ad71f6e90c3fba7c2ed5cec409b9 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/24328d4e78807fa26e0e047258aacd6fd6fb52cf | or1k | unknown | NOK | http://autobuild.buildroot.net/results/95d6fcad67e0475f05427803486b4e7cb1466f0f | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/6c012d7862308168f00fdf00f966059627aa57d3 | i686 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/93badc1b50fd20e2c916cdcfc495b662215fe9a9 | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/04ad2a0e2734866bb5399543a0801645f983336a | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/e17bb5e205963c61ee129104f7a1785f7303e363 | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/8e35d3294a43b9de365f03efbea25dcaeb6bf13b | ORPH powerpc64le | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/5964284a39c62c2de6bb836d167751c5ff8f8535 | i486 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/fde6f68ebc152dce01479ecbfbbf7698fb061b60 | riscv64 | yajl-2.1.0 | NOK | http://autobuild.buildroot.net/results/f809986ff92b0fe84e697bb41d327f4bc2ef2112 | ORPH riscv64 | yajl-2.1.0 | NOK | http://autobuild.buildroot.net/results/82ac95352c1b01b7effa153dbcdaa88668457db9 | ORPH nios2 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/da86dbd0b2ebd6cb748f9ae2e4fcefa63edf51a1 | sparc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/bd6da2d4125e3cb13ff4520581e42178112ca7cb | riscv64 | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/0138021ad813213f904997afbd94cdd04b7a05d0 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/efa7d378f0721cf6d717ada9176729e8293986bd | Classification of failures by reason for 2022.02.x -------------------------------------------------- exempi-2.6.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/64d69fa1ffe0afc959045ac52202784153b20b3c | Classification of failures by reason for 2022.05.x -------------------------------------------------- unknown | 3 igd2-for-linux-2.1 | 2 pixman-0.40.0 | 2 /home/buildroot/autobuild/i... | 1 dahdi-linux-5c840cf43838e06... | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-gcc-final-9.4.0 | 1 host-pahole-73383b3a39afe86... | 1 libcamera-8a845ab078c3fe12a... | 1 libglib2-2.70.4 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/176838b6c7a74f2d82d14679499bba8eb37268cd | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/7b8dfe4c45c669689f8d422029b6449e3b8cdbc8 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/239736e92d7ed97a4fd058c28985b38cef0e9a11 | arm | host-gcc-final-9.4.0 | NOK | http://autobuild.buildroot.net/results/526545e32c0b2ad30a75d9495f8698d0bf2f097e | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d9eb4446ae5c9c6b425bc3ef15de746f3f0469b6 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/03ef95066476e821a7c416f8962716da7c29bdf3 | powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d6bd1fdbc311658f05e1b37a1cac0249c93acecb | riscv32 | libcamera-8a845ab078c3fe12a... | NOK | http://autobuild.buildroot.net/results/03f4dd4771e8f3c7b54f202b06f987578bf13167 | arc | libglib2-2.70.4 | NOK | http://autobuild.buildroot.net/results/9bf17c48561d4f10d42c30d7f2416798b26eeea3 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/5a82f6ccf1e04a98e3a12949344010bbd9fe9166 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/534d530fd8e19a759435584dfcaf42c1e4e7812c | or1k | unknown | NOK | http://autobuild.buildroot.net/results/e35440bcde84f817bd603ee1d2660768301729ab | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/11a603310146f4b808f1f52d700c0b1f4dc98461 | arc | unknown | NOK | http://autobuild.buildroot.net/results/3e5ad95e43a9fa2e24d9423e8f08ad97443356f1 | or1k | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/661495d8b934de39cf720b326ff8ba29e3f933e6 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- containerd-1.6.6 | 2 frr-8.2.2 | 2 igd2-for-linux-2.1 | 2 gummiboot-2bcd919c681c952eb... | 1 host-gcc-initial-11.3.0 | 1 host-moby-buildkit-0.10.0 | 1 host-pahole-73383b3a39afe86... | 1 libcap-ng-0.8.3 | 1 libgcrypt | 1 libglib2-2.72.3 | 1 libnss-3.81 | 1 ltp-testsuite-20220527 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/fec6412855d83d27c53de805449554f409c80799 | powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/0d6cafac0b8490955d02dcbe7f90d1e2a47a6a91 | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/b591be03f6aa34e90310b990e6a822292f22ede4 | xtensa | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/3e3b2336366bec5c22f58bf8e236cd37bf2a0e61 | i686 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/f28c5d009fbbcdd341b5912e53dd686349a7264a | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f5adbd313b03c389e1be27ae23ca77d1abe652e2 | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/6fae4e9d2e8240c7621242f44aced404112f384b | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c7a4a4a38c1b8c4a19acbbee6c0124b206ad3708 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6637c5537f7927e1c6c992ccf57ca8077065a463 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2b6325cabf73e08f111a1829809ace268473ed92 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/004e3b056d027f670059bb775fbbfc816129ceac | arm | libgcrypt | TIM | http://autobuild.buildroot.net/results/7faae7c72d93b7c5de5f8dd585e403f9bb85805a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/638535d964a3e4bca206921a3514c55aca12f49e | powerpc64le | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/feb72930545280fe4fe038cb8f6cd3e27f79710d | x86_64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/3695a2396165392ec17343ce36c30c3084a0d12d | -- http://autobuild.buildroot.net From nunes.erico at gmail.com Fri Oct 7 06:46:10 2022 From: nunes.erico at gmail.com (Erico Nunes) Date: Fri, 7 Oct 2022 08:46:10 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: <20221006221236.7dd6580a@windsurf> References: <20221004143943.1456694-1-nunes.erico@gmail.com> <20221006221236.7dd6580a@windsurf> Message-ID: On Thu, Oct 6, 2022 at 10:12 PM Thomas Petazzoni wrote: > > On Tue, 4 Oct 2022 16:39:42 +0200 > Erico Nunes wrote: > > > Drop backported patches and rebase the ones that are still relevant. > > > > From version 37 to 38, there is a new build system in place, which is > > still custom Makefiles. > > This introduces a host-efivar package to account for the 'makeguids' > > tool. Previously it was not too cumbersome to work around building that > > tool for the host, but with the new build system it is increasingly > > coupled with the target build that the least hacky way to work around it > > is with a host package and a Makefile patch. > > > > Signed-off-by: Erico Nunes > > I've applied both, but I'm not super fan of the Buildroot-specific > patch in efivar to not build makeguids. Would it be possible to work > with the upstream efivar community to find a suitable solution to this > issue? Thanks. I did check for related work in upstream and there are two relevant reports: https://github.com/rhboot/efivar/issues/130 reports the makeguids issue in cross compilation. There is no solution proposal for it in its current state though. One potential solution is to change the build to something less custom, like meson, then in https://github.com/rhboot/efivar/pull/216 there is a draft pull request to actually move it to meson. Assuming that gets in for the next efivar release, the Buildroot specific patch could be dropped by then. I think what I can do at this point is test that locally to see if it addresses the major problem that we have with Buildroot for a future version bump and provide some feedback there. Erico From wg at grandegger.com Fri Oct 7 07:27:37 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 09:27:37 +0200 Subject: [Buildroot] [PATCH v2] package/udisks: install to staging Message-ID: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> UDisks2 provides a Library API [1] for accessing the UDisks2 service via "libudisks2.so". For development of UDisks2 clients, install to staging as well! [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html Signed-off-by: Wolfgang Grandegger --- -Changes since v1: Remove note about the reported bug and add authors listed by "utils/get-developers". package/udisks/udisks.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk index 2bf519a2cc..959333d01f 100644 --- a/package/udisks/udisks.mk +++ b/package/udisks/udisks.mk @@ -10,6 +10,7 @@ UDISKS_SITE = https://github.com/storaged-project/udisks/releases/download/udisk UDISKS_LICENSE = GPL-2.0+ UDISKS_LICENSE_FILES = COPYING UDISKS_CPE_ID_VENDOR = freedesktop +UDISKS_INSTALL_STAGING = YES UDISKS_DEPENDENCIES = \ host-pkgconf \ -- 2.30.2 From wg at grandegger.com Fri Oct 7 07:35:48 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 09:35:48 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> Message-ID: <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> Hello Giulio, I send trivial patches directly via email. Without "git send-email..." and I also didn't use "buildroot/get-developers". I just sent v2, hope it's fine now!? From my point of few it's a bug... but well, it doesn't really matter. Wolfgang On 06.10.22 22:14, Giulio Benetti wrote: > Hi Wolgang, > > thanks for contributing! > > Something to deal with. > Before 'git send-email...' do you use buildroot/get-developers script? > > I ask this because I'm not in Cc but I maintain this package as well as > other 2 people. > > Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: >> UDisks2 provides an Library API [1] for accessing the UDisks2 service >> via >> "libudisks2.so". For development of UDisks2 clients, install to staging >> as well! This issue has been reported as bug [2] as well. > > It doesn't make sense that this has been reported as a bug since it's > not a bug but an adding. So please remove last sentence. > >> [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] >> [2] https://bugs.busybox.net/show_bug.cgi?id=15026 > > And this line ^^^ too. > > Best regards From quentin.schulz at theobroma-systems.com Fri Oct 7 08:10:45 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Fri, 7 Oct 2022 10:10:45 +0200 Subject: [Buildroot] [PATCH] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <326f98fd-645f-5679-a0e5-6af19e8913ff@theobroma-systems.com> <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <9cd26511-ec08-cd3c-3083-cd6bb58e483d@theobroma-systems.com> Hi Victor, Please pass -v 2 to git format-patch so that the title of the mail is [PATCH v2] otherwise it gets difficult to know which version is the last one :) On 10/6/22 17:52, Victor Dumas wrote: > Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. > On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine > > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- > 1 file changed, 36 insertions(+), 26 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..c9d40e1cce 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + echo "patch file $file" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -125,32 +159,8 @@ main() { > > find_args+=( "-type" "f" "-print" ) > > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + export -f patch_file > + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} > -0 and -d '\n' are both changing the delimiter, I assume this actually does not work because -d '\n' will be parsed last (and thus used). Actually, I think my suggestion of find "${rootdir}" ${find_args[@]} -print0 is not good either (though probably working since -print0 will be parsed after -print), we should modify find_args above the git context here to use -print0 instead of -print. Cheers, Quentin From sebastien.szymanski at armadeus.com Fri Oct 7 09:23:00 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Fri, 7 Oct 2022 11:23:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/rt-tests: bump version to 2.4 Message-ID: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/rt-tests/rt-tests.hash | 2 +- package/rt-tests/rt-tests.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rt-tests/rt-tests.hash b/package/rt-tests/rt-tests.hash index 3adda60f42..49df8313f9 100644 --- a/package/rt-tests/rt-tests.hash +++ b/package/rt-tests/rt-tests.hash @@ -1,4 +1,4 @@ # From https://mirrors.edge.kernel.org/pub/linux/utils/rt-tests/sha256sums.asc -sha256 b5e7959bcb5c703b2743030751af975ea4e04962e29fc1118f4b605987585735 rt-tests-2.3.tar.xz +sha256 393457f0c91cce57e82b876ecb9b672871f898e6cecafc751548079512bcc808 rt-tests-2.4.tar.xz # locally computed hash sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/rt-tests/rt-tests.mk b/package/rt-tests/rt-tests.mk index 056a4a6723..74290211ce 100644 --- a/package/rt-tests/rt-tests.mk +++ b/package/rt-tests/rt-tests.mk @@ -6,7 +6,7 @@ RT_TESTS_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/rt-tests RT_TESTS_SOURCE = rt-tests-$(RT_TESTS_VERSION).tar.xz -RT_TESTS_VERSION = 2.3 +RT_TESTS_VERSION = 2.4 RT_TESTS_LICENSE = GPL-2.0+ RT_TESTS_LICENSE_FILES = COPYING -- 2.35.1 From giulio.benetti at benettiengineering.com Fri Oct 7 12:05:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Fri, 7 Oct 2022 14:05:33 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> Message-ID: <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> Hi Wolfgang, On 07/10/22 09:35, Wolfgang Grandegger wrote: > Hello Giulio, > > I send trivial patches directly via email. Without "git send-email..." > and I also didn't use "buildroot/get-developers". I just sent v2, hope > it's fine now!? Yes, now it looks ok. I ask you please to register to patchwork and set v1 patch to superseded: https://patchwork.ozlabs.org/project/buildroot/list/ Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > From my point of few it's a bug... but well, it doesn't really matter. > > Wolfgang > > On 06.10.22 22:14, Giulio Benetti wrote: >> Hi Wolgang, >> >> thanks for contributing! >> >> Something to deal with. >> Before 'git send-email...' do you use buildroot/get-developers script? >> >> I ask this because I'm not in Cc but I maintain this package as well as >> other 2 people. >> >> Il 06/10/2022 21:52, Wolfgang Grandegger ha scritto: >>> UDisks2 provides an Library API [1] for accessing the UDisks2 service >>> via >>> "libudisks2.so". For development of UDisks2 clients, install to staging >>> as well! This issue has been reported as bug [2] as well. >> >> It doesn't make sense that this has been reported as a bug since it's >> not a bug but an adding. So please remove last sentence. >> >>> [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html[1] >>> [2] https://bugs.busybox.net/show_bug.cgi?id=15026 >> >> And this line ^^^ too. >> >> Best regards From james.hilliard1 at gmail.com Fri Oct 7 12:24:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:24:47 -0600 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: bump to version 20171122 Message-ID: <20221007122447.1048167-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/ocf-linux/ocf-linux.hash | 2 +- package/ocf-linux/ocf-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ocf-linux/ocf-linux.hash b/package/ocf-linux/ocf-linux.hash index 0bd0ea19df..747bbcab56 100644 --- a/package/ocf-linux/ocf-linux.hash +++ b/package/ocf-linux/ocf-linux.hash @@ -1,2 +1,2 @@ # Locally computed: -sha256 5113609d2c2c43fde962bec1238fe5a81211a751ebb0337b54a9804d40cfef53 ocf-linux-20120127.tar.gz +sha256 3d7984754d58ced5695889744caf1e18a53f5d2e35ed40cc04d3595e59b7431f ocf-linux-20171122.tar.gz diff --git a/package/ocf-linux/ocf-linux.mk b/package/ocf-linux/ocf-linux.mk index 01854fa73a..52169eda4f 100644 --- a/package/ocf-linux/ocf-linux.mk +++ b/package/ocf-linux/ocf-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -OCF_LINUX_VERSION = 20120127 +OCF_LINUX_VERSION = 20171122 OCF_LINUX_SITE = http://downloads.sourceforge.net/project/ocf-linux/ocf-linux/$(OCF_LINUX_VERSION) OCF_LINUX_INSTALL_STAGING = YES -- 2.34.1 From yann.morin at orange.com Fri Oct 7 12:40:43 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 7 Oct 2022 14:40:43 +0200 Subject: [Buildroot] [PATCH 1/1] package/mosquitto: add host variant Message-ID: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> mosquitto can be configured to use password files. Those have a very trivial layout, with one "username:password" tuple per line, not unlike Apache's htpasswd file format, but unlike htpasswd files, the password can be either in clear (boo!), or encrypted (by calling into openssl's libcrypto). Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, again very like Apache's htpasswd, but the encrypted form is different (of course). This encryption is handled by mosquitto_passwd, which can create, update, or delete users, all while storing their encrypted password, or it can also convert a password file with clear-text passwords into a password file with encrypted passwords, e.g. it turns each "foo:bar" entry to their corresponding encrypted form, like "foo:$7$101$yLPgk5fn46d....==". It can be very interesting to maintain a clear-text DB of users:passwords in configuration management [0], and only convert it to encrypted passwords when embedded on the target. Add a host variant for mosquitto, which only installs mosquitto_passwd. [0] ensuring safety, confidentiality, and integrity of that DB is left as an exercise to the user, and is clearly out of scope for Buildroot, like storing the root password in the .config is. Signed-off-by: Yann E. MORIN Cc: Peter Korsgaard Cc: Titouan Christophe Cc: Thomas Petazzoni --- package/Config.in.host | 1 + package/mosquitto/Config.in.host | 4 ++++ package/mosquitto/mosquitto.mk | 20 ++++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 package/mosquitto/Config.in.host diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..84517787cc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -57,6 +57,7 @@ menu "Host utilities" source "package/mfgtools/Config.in.host" source "package/mkpasswd/Config.in.host" source "package/moby-buildkit/Config.in.host" + source "package/mosquitto/Config.in.host" source "package/mtd/Config.in.host" source "package/mtools/Config.in.host" source "package/mxsldr/Config.in.host" diff --git a/package/mosquitto/Config.in.host b/package/mosquitto/Config.in.host new file mode 100644 index 0000000000..39e287ee89 --- /dev/null +++ b/package/mosquitto/Config.in.host @@ -0,0 +1,4 @@ +config BR2_PACKAGE_HOST_MOSQUITTO + bool "host mosquitto (mosquitto_passwd)" + help + Only installs mosquitto_passwd. diff --git a/package/mosquitto/mosquitto.mk b/package/mosquitto/mosquitto.mk index 12de2946b7..a95a2cac4d 100644 --- a/package/mosquitto/mosquitto.mk +++ b/package/mosquitto/mosquitto.mk @@ -128,4 +128,24 @@ define MOSQUITTO_USERS endef endif +HOST_MOSQUITTO_DEPENDENCIES = host-pkgconf host-openssl + +HOST_MOSQUITTO_MAKE_OPTS = \ + $(HOST_CONFIGURE_OPTS) \ + UNAME=Linux \ + STRIP=true \ + prefix=$(HOST_DIR) \ + WITH_WRAP=no \ + WITH_DOCS=no \ + WITH_TLS=yes + +define HOST_MOSQUITTO_BUILD_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) +endef + +define HOST_MOSQUITTO_INSTALL_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) install +endef + $(eval $(generic-package)) +$(eval $(host-generic-package)) -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From james.hilliard1 at gmail.com Fri Oct 7 12:47:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:47:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/assimp: bump to version 5.2.5 Message-ID: <20221007124703.2733559-1-james.hilliard1@gmail.com> Replace disable -Werror patch with new cmake option: -DASSIMP_WARNINGS_AS_ERRORS=OFF Signed-off-by: James Hilliard --- package/assimp/0001-code-disable-Werror.patch | 39 ------------------- package/assimp/assimp.hash | 2 +- package/assimp/assimp.mk | 3 +- 3 files changed, 3 insertions(+), 41 deletions(-) delete mode 100644 package/assimp/0001-code-disable-Werror.patch diff --git a/package/assimp/0001-code-disable-Werror.patch b/package/assimp/0001-code-disable-Werror.patch deleted file mode 100644 index 33867e61c3..0000000000 --- a/package/assimp/0001-code-disable-Werror.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 5146e1c4d58174e302dbdcf2a85c2023be1cffc6 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 10 Dec 2021 15:15:30 +0100 -Subject: [PATCH] code: disable -Werror -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Fixes: - - .../build/assimp-5.1.3/code/PostProcessing/TriangulateProcess.cpp:285:50: error: argument 1 value ?4294967294? exceeds maximum object size 2147483647 [-Werror=alloc-size-larger-than=] - 285 | std::unique_ptr done(new bool[max_out]); - | ^ - [...] - .../host/opt/ext-toolchain/powerpc-buildroot-linux-uclibc/include/c++/9.3.0/new:127:26: note: in a call to allocation function ?void* operator new [](std::size_t)? declared here - 127 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) - | ^~~~~~~~ - -Signed-off-by: Peter Seiderer ---- - code/CMakeLists.txt | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/code/CMakeLists.txt b/code/CMakeLists.txt -index e45bf8a2a..f71b6583d 100644 ---- a/code/CMakeLists.txt -+++ b/code/CMakeLists.txt -@@ -1167,8 +1167,6 @@ TARGET_USE_COMMON_OUTPUT_DIRECTORY(assimp) - # enable warnings as errors ######################################## - IF (MSVC) - TARGET_COMPILE_OPTIONS(assimp PRIVATE /WX) --ELSE() -- TARGET_COMPILE_OPTIONS(assimp PRIVATE -Werror) - ENDIF() - - # adds C_FLAGS required to compile zip.c on old GCC 4.x compiler --- -2.34.1 - diff --git a/package/assimp/assimp.hash b/package/assimp/assimp.hash index a778b79132..86a90927ed 100644 --- a/package/assimp/assimp.hash +++ b/package/assimp/assimp.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c9cbbc8589639cd8c13f65e94a90422a70454e8fa150cf899b6038ba86e9ecff assimp-5.2.1.tar.gz +sha256 b5219e63ae31d895d60d98001ee5bb809fb2c7b2de1e7f78ceeb600063641e1a assimp-5.2.5.tar.gz sha256 147874443d242b4e2bae97036e26ec9d6b37f706174c1bd5ecfcc8c1294cef51 LICENSE diff --git a/package/assimp/assimp.mk b/package/assimp/assimp.mk index 79865673ac..0b6034fb8e 100644 --- a/package/assimp/assimp.mk +++ b/package/assimp/assimp.mk @@ -4,7 +4,7 @@ # ################################################################################ -ASSIMP_VERSION = 5.2.1 +ASSIMP_VERSION = 5.2.5 ASSIMP_SITE = $(call github,assimp,assimp,v$(ASSIMP_VERSION)) ASSIMP_LICENSE = BSD-3-Clause ASSIMP_LICENSE_FILES = LICENSE @@ -39,6 +39,7 @@ ASSIMP_CXXFLAGS += -O0 endif ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \ + -DASSIMP_WARNINGS_AS_ERRORS=OFF \ -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)" $(eval $(cmake-package)) -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 12:52:50 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 06:52:50 -0600 Subject: [Buildroot] [PATCH 1/1] package/brltty: bump to version 6.5 Message-ID: <20221007125250.3259333-1-james.hilliard1@gmail.com> README hash changed due to version update: https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 Signed-off-by: James Hilliard --- package/brltty/brltty.hash | 4 ++-- package/brltty/brltty.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/brltty/brltty.hash b/package/brltty/brltty.hash index cec074d8ce..9fc63714bc 100644 --- a/package/brltty/brltty.hash +++ b/package/brltty/brltty.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 bc7573b0d0ab865c36607945b64c209312405571788f3b409397726f6143eaa6 brltty-6.4.tar.xz +sha256 2f173535291ba39b5a9fc8d80c349234333d92042d95d6dd88796c98a02f316b brltty-6.5.tar.xz sha256 d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f LICENSE-LGPL -sha256 429be921e6bf783303a1f94cbb7f29dc4f0839e47efe38150b808f886028f4df README +sha256 c00c876cb4581a6b54fcc176f7e694896e5b52c4b015615566a787e8bc89fe69 README diff --git a/package/brltty/brltty.mk b/package/brltty/brltty.mk index 600bf596df..dc5a38cddb 100644 --- a/package/brltty/brltty.mk +++ b/package/brltty/brltty.mk @@ -4,7 +4,7 @@ # ################################################################################ -BRLTTY_VERSION = 6.4 +BRLTTY_VERSION = 6.5 BRLTTY_SOURCE = brltty-$(BRLTTY_VERSION).tar.xz BRLTTY_SITE = http://brltty.com/archive BRLTTY_INSTALL_STAGING_OPTS = INSTALL_ROOT=$(STAGING_DIR) install -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 13:39:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 07:39:11 -0600 Subject: [Buildroot] [PATCH 1/2] package/libglib2: bump to version 2.74.0 Message-ID: <20221007133912.2869000-1-james.hilliard1@gmail.com> Drop patch which is now upstream. Replace pcre with pcre2 dependency. Drop no longer supported fam option. COPYING hash changed due to formatting changes. Signed-off-by: James Hilliard --- .../0002-remove-cpp-requirement.patch | 87 ------------------- package/libglib2/libglib2.hash | 6 +- package/libglib2/libglib2.mk | 9 +- 3 files changed, 7 insertions(+), 95 deletions(-) delete mode 100644 package/libglib2/0002-remove-cpp-requirement.patch diff --git a/package/libglib2/0002-remove-cpp-requirement.patch b/package/libglib2/0002-remove-cpp-requirement.patch deleted file mode 100644 index 84511dea32..0000000000 --- a/package/libglib2/0002-remove-cpp-requirement.patch +++ /dev/null @@ -1,87 +0,0 @@ -From dd65a8cfdeafeb18b72d8d1eb676c7ca43ae505f Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Mon, 16 Sep 2019 10:12:38 -0700 -Subject: [PATCH] remove cpp requirement - -The c++ test is necessary to ensure libglib doesn't accidentally use C++ -reserved keywords in public headers. Because this is just a test, it isn't -necessary to have a C++ compiler to build libglib2. - -Signed-off-by: Adam Duskett -Upstream status: Denied (Buildroot specific) -https://gitlab.gnome.org/GNOME/glib/issues/1748 ---- - glib/glibconfig.h.in | 1 - - meson.build | 19 +------------------ - 2 files changed, 1 insertion(+), 19 deletions(-) - -diff --git a/glib/glibconfig.h.in b/glib/glibconfig.h.in -index e66748d95..2173d8be6 100644 ---- a/glib/glibconfig.h.in -+++ b/glib/glibconfig.h.in -@@ -119,7 +119,6 @@ typedef unsigned @glib_intptr_type_define@ guintptr; - @glib_vacopy@ - - @g_have_iso_c_varargs@ -- at g_have_iso_cxx_varargs@ - - /* gcc-2.95.x supports both gnu style and ISO varargs, but if -ansi - * is passed ISO vararg support is turned off, and there is no work -diff --git a/meson.build b/meson.build -index 48fdfe864..5df242e39 100644 ---- a/meson.build -+++ b/meson.build -@@ -1,4 +1,4 @@ --project('glib', 'c', 'cpp', -+project('glib', 'c', - version : '2.72.3', - # NOTE: We keep this pinned at 0.52 because that's what Debian Stable ships - meson_version : '>= 0.52.0', -@@ -10,7 +10,6 @@ project('glib', 'c', 'cpp', - ) - - cc = meson.get_compiler('c') --cxx = meson.get_compiler('cpp') - - cc_can_run = not meson.is_cross_build() or meson.has_exe_wrapper() - -@@ -495,7 +494,6 @@ else - endif - - add_project_arguments(cc.get_supported_arguments(warning_c_args), language: 'c') --add_project_arguments(cxx.get_supported_arguments(warning_cxx_args), language: 'cpp') - - # FIXME: We cannot build some of the GResource tests with -z nodelete, which - # means we cannot use that flag in add_project_link_arguments(), and must add -@@ -1734,20 +1732,6 @@ if g_have_iso_c_varargs - #endif''') - endif - --g_have_iso_cxx_varargs = cxx.compiles(''' -- void some_func (void) { -- int a(int p1, int p2, int p3); -- #define call_a(...) a(1,__VA_ARGS__) -- call_a(2,3); -- }''', name : 'ISO C99 varargs macros in C++') -- --if g_have_iso_cxx_varargs -- glibconfig_conf.set('g_have_iso_cxx_varargs', ''' --#ifdef __cplusplus --# define G_HAVE_ISO_VARARGS 1 --#endif''') --endif -- - g_have_gnuc_varargs = cc.compiles(''' - void some_func (void) { - int a(int p1, int p2, int p3); -@@ -2381,7 +2365,6 @@ subdir('gobject') - subdir('gthread') - subdir('gmodule') - subdir('gio') --subdir('fuzzing') - if build_tests - subdir('tests') - endif --- -2.34.1 - diff --git a/package/libglib2/libglib2.hash b/package/libglib2/libglib2.hash index 0395ff234a..ccda94f7c1 100644 --- a/package/libglib2/libglib2.hash +++ b/package/libglib2/libglib2.hash @@ -1,4 +1,4 @@ -# https://download.gnome.org/sources/glib/2.72/glib-2.72.3.sha256sum -sha256 4a39a2f624b8512d500d5840173eda7fa85f51c109052eae806acece85d345f0 glib-2.72.3.tar.xz +# https://download.gnome.org/sources/glib/2.74/glib-2.74.0.sha256sum +sha256 3652c7f072d7b031a6b5edd623f77ebc5dcd2ae698598abcc89ff39ca75add30 glib-2.74.0.tar.xz # License files, locally calculated -sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING +sha256 fa6f36630bb1e0c571d34b2bbdf188d08495c9dbf58f28cac112f303fc1f58fb COPYING diff --git a/package/libglib2/libglib2.mk b/package/libglib2/libglib2.mk index 2970d5a7a9..a0dea81c3f 100644 --- a/package/libglib2/libglib2.mk +++ b/package/libglib2/libglib2.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBGLIB2_VERSION_MAJOR = 2.72 -LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).3 +LIBGLIB2_VERSION_MAJOR = 2.74 +LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).0 LIBGLIB2_SOURCE = glib-$(LIBGLIB2_VERSION).tar.xz LIBGLIB2_SITE = http://ftp.gnome.org/pub/gnome/sources/glib/$(LIBGLIB2_VERSION_MAJOR) LIBGLIB2_LICENSE = LGPL-2.1+ @@ -24,7 +24,6 @@ endif HOST_LIBGLIB2_CONF_OPTS = \ -Ddtrace=false \ - -Dfam=false \ -Dglib_debug=disabled \ -Dlibelf=disabled \ -Dselinux=disabled \ @@ -35,12 +34,12 @@ HOST_LIBGLIB2_CONF_OPTS = \ LIBGLIB2_DEPENDENCIES = \ host-pkgconf host-libglib2 \ - libffi pcre zlib $(TARGET_NLS_DEPENDENCIES) + libffi pcre2 zlib $(TARGET_NLS_DEPENDENCIES) HOST_LIBGLIB2_DEPENDENCIES = \ host-gettext \ host-libffi \ - host-pcre \ + host-pcre2 \ host-pkgconf \ host-util-linux \ host-zlib -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 7 13:39:12 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 7 Oct 2022 07:39:12 -0600 Subject: [Buildroot] [PATCH 2/2] package/gobject-introspection: bump to version 1.74.0 In-Reply-To: <20221007133912.2869000-1-james.hilliard1@gmail.com> References: <20221007133912.2869000-1-james.hilliard1@gmail.com> Message-ID: <20221007133912.2869000-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gobject-introspection/gobject-introspection.hash | 4 ++-- package/gobject-introspection/gobject-introspection.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gobject-introspection/gobject-introspection.hash b/package/gobject-introspection/gobject-introspection.hash index 8f9d323d9a..c1a1363ddb 100644 --- a/package/gobject-introspection/gobject-introspection.hash +++ b/package/gobject-introspection/gobject-introspection.hash @@ -1,5 +1,5 @@ -#From http://ftp.gnome.org/pub/GNOME/sources/gobject-introspection/1.70/gobject-introspection-1.72.0.sha256sum -sha256 02fe8e590861d88f83060dd39cda5ccaa60b2da1d21d0f95499301b186beaabc gobject-introspection-1.72.0.tar.xz +#From https://download.gnome.org/sources/gobject-introspection/1.74/gobject-introspection-1.74.0.sha256sum +sha256 347b3a719e68ba4c69ff2d57ee2689233ea8c07fc492205e573386779e42d653 gobject-introspection-1.74.0.tar.xz sha256 faa2e414bd5f91d2d2c39e85c7cc3f2ccde05c3306f96b404f8ed8cf0266c279 COPYING.LGPL sha256 4c1cedcbb4a12ea964f1160dbbf36099e5a59b96129a99a1a1a61f2cb09271fb COPYING.GPL sha256 23f82cbc9808cdd8e902df38271434040ce0562ca382ac2a96f5e3bf807b6d31 giscanner/scannerlexer.l diff --git a/package/gobject-introspection/gobject-introspection.mk b/package/gobject-introspection/gobject-introspection.mk index c8ad9b3c72..436c12aa48 100644 --- a/package/gobject-introspection/gobject-introspection.mk +++ b/package/gobject-introspection/gobject-introspection.mk @@ -4,7 +4,7 @@ # ################################################################################ -GOBJECT_INTROSPECTION_VERSION_MAJOR = 1.72 +GOBJECT_INTROSPECTION_VERSION_MAJOR = 1.74 GOBJECT_INTROSPECTION_VERSION = $(GOBJECT_INTROSPECTION_VERSION_MAJOR).0 GOBJECT_INTROSPECTION_SITE = http://ftp.gnome.org/pub/GNOME/sources/gobject-introspection/$(GOBJECT_INTROSPECTION_VERSION_MAJOR) GOBJECT_INTROSPECTION_SOURCE = gobject-introspection-$(GOBJECT_INTROSPECTION_VERSION).tar.xz -- 2.34.1 From wg at grandegger.com Fri Oct 7 15:04:14 2022 From: wg at grandegger.com (Wolfgang Grandegger) Date: Fri, 7 Oct 2022 17:04:14 +0200 Subject: [Buildroot] [PATCH] package/udisks: install to staging In-Reply-To: <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> References: <41db705a-2c63-47bc-3f03-d4c52d2a4b14@grandegger.com> <1d22bd7b-1136-6911-7181-81f2b24c5b00@grandegger.com> <7dce1c6a-176b-d97a-47b3-cc74a16ad2a6@benettiengineering.com> Message-ID: Done! Thx, Wolfgang On 07.10.22 14:05, Giulio Benetti wrote: > Hi Wolfgang, > > On 07/10/22 09:35, Wolfgang Grandegger wrote: >> Hello Giulio, >> >> I send trivial patches directly via email. Without "git send-email..." >> and I also didn't use "buildroot/get-developers". I just sent v2, hope >> it's fine now!? > > Yes, now it looks ok. I ask you please to register to patchwork and set > v1 patch to superseded: > https://patchwork.ozlabs.org/project/buildroot/list/ > > Thank you! > Best regards From peter at korsgaard.com Fri Oct 7 15:40:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:40:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/mosquitto: add host variant In-Reply-To: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> (yann morin's message of "Fri, 7 Oct 2022 14:40:43 +0200") References: <22269_1665146445_63401E4D_22269_436_1_6b44a0c69cdefac160c38dfa526662d35a77ec0e.1665146097.git.yann.morin@orange.com> Message-ID: <874jwfskvc.fsf@dell.be.48ers.dk> >>>>> writes: > mosquitto can be configured to use password files. Those have a very > trivial layout, with one "username:password" tuple per line, not unlike > Apache's htpasswd file format, but unlike htpasswd files, the password > can be either in clear (boo!), or encrypted (by calling into openssl's > libcrypto). > Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, > again very like Apache's htpasswd, but the encrypted form is different > (of course). This encryption is handled by mosquitto_passwd, which can > create, update, or delete users, all while storing their encrypted > password, or it can also convert a password file with clear-text > passwords into a password file with encrypted passwords, e.g. it turns > each "foo:bar" entry to their corresponding encrypted form, like > "foo:$7$101$yLPgk5fn46d....==". > It can be very interesting to maintain a clear-text DB of > users:passwords in configuration management [0], and only convert it to > encrypted passwords when embedded on the target. > Add a host variant for mosquitto, which only installs mosquitto_passwd. > [0] ensuring safety, confidentiality, and integrity of that DB is left > as an exercise to the user, and is clearly out of scope for Buildroot, > like storing the root password in the .config is. > Signed-off-by: Yann E. MORIN > Cc: Peter Korsgaard > Cc: Titouan Christophe > Cc: Thomas Petazzoni Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:40:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:40:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/assimp: bump to version 5.2.5 In-Reply-To: <20221007124703.2733559-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:47:03 -0600") References: <20221007124703.2733559-1-james.hilliard1@gmail.com> Message-ID: <87zge7r69y.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Replace disable -Werror patch with new cmake option: > -DASSIMP_WARNINGS_AS_ERRORS=OFF > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:41:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:41:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/brltty: bump to version 6.5 In-Reply-To: <20221007125250.3259333-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:52:50 -0600") References: <20221007125250.3259333-1-james.hilliard1@gmail.com> Message-ID: <87v8ovr695.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > README hash changed due to version update: > https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:41:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 07 Oct 2022 17:41:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: bump to version 20171122 In-Reply-To: <20221007122447.1048167-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 7 Oct 2022 06:24:47 -0600") References: <20221007122447.1048167-1-james.hilliard1@gmail.com> Message-ID: <87r0zjr686.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 7 15:38:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:38:53 +0200 Subject: [Buildroot] [git commit] package/mosquitto: add host variant Message-ID: <20221007154207.C93ED86B8D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd9f138b5a9419c5a251411e2abbdc4bbf3a43f7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mosquitto can be configured to use password files. Those have a very trivial layout, with one "username:password" tuple per line, not unlike Apache's htpasswd file format, but unlike htpasswd files, the password can be either in clear (boo!), or encrypted (by calling into openssl's libcrypto). Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd, again very like Apache's htpasswd, but the encrypted form is different (of course). This encryption is handled by mosquitto_passwd, which can create, update, or delete users, all while storing their encrypted password, or it can also convert a password file with clear-text passwords into a password file with encrypted passwords, e.g. it turns each "foo:bar" entry to their corresponding encrypted form, like "foo:$7$101$yLPgk5fn46d....==". It can be very interesting to maintain a clear-text DB of users:passwords in configuration management [0], and only convert it to encrypted passwords when embedded on the target. Add a host variant for mosquitto, which only installs mosquitto_passwd. [0] ensuring safety, confidentiality, and integrity of that DB is left as an exercise to the user, and is clearly out of scope for Buildroot, like storing the root password in the .config is. Signed-off-by: Yann E. MORIN Cc: Peter Korsgaard Cc: Titouan Christophe Cc: Thomas Petazzoni Signed-off-by: Peter Korsgaard --- package/Config.in.host | 1 + package/mosquitto/Config.in.host | 4 ++++ package/mosquitto/mosquitto.mk | 20 ++++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..84517787cc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -57,6 +57,7 @@ menu "Host utilities" source "package/mfgtools/Config.in.host" source "package/mkpasswd/Config.in.host" source "package/moby-buildkit/Config.in.host" + source "package/mosquitto/Config.in.host" source "package/mtd/Config.in.host" source "package/mtools/Config.in.host" source "package/mxsldr/Config.in.host" diff --git a/package/mosquitto/Config.in.host b/package/mosquitto/Config.in.host new file mode 100644 index 0000000000..39e287ee89 --- /dev/null +++ b/package/mosquitto/Config.in.host @@ -0,0 +1,4 @@ +config BR2_PACKAGE_HOST_MOSQUITTO + bool "host mosquitto (mosquitto_passwd)" + help + Only installs mosquitto_passwd. diff --git a/package/mosquitto/mosquitto.mk b/package/mosquitto/mosquitto.mk index 12de2946b7..a95a2cac4d 100644 --- a/package/mosquitto/mosquitto.mk +++ b/package/mosquitto/mosquitto.mk @@ -128,4 +128,24 @@ define MOSQUITTO_USERS endef endif +HOST_MOSQUITTO_DEPENDENCIES = host-pkgconf host-openssl + +HOST_MOSQUITTO_MAKE_OPTS = \ + $(HOST_CONFIGURE_OPTS) \ + UNAME=Linux \ + STRIP=true \ + prefix=$(HOST_DIR) \ + WITH_WRAP=no \ + WITH_DOCS=no \ + WITH_TLS=yes + +define HOST_MOSQUITTO_BUILD_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) +endef + +define HOST_MOSQUITTO_INSTALL_CMDS + $(MAKE) -C $(@D)/apps/mosquitto_passwd $(HOST_MOSQUITTO_MAKE_OPTS) install +endef + $(eval $(generic-package)) +$(eval $(host-generic-package)) From peter at korsgaard.com Fri Oct 7 15:39:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:39:48 +0200 Subject: [Buildroot] [git commit] package/assimp: bump to version 5.2.5 Message-ID: <20221007154207.D82F986B8E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7d843d9cc0064d6690cfc000e579f575e2c0cc4d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Replace disable -Werror patch with new cmake option: -DASSIMP_WARNINGS_AS_ERRORS=OFF Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/assimp/0001-code-disable-Werror.patch | 39 --------------------------- package/assimp/assimp.hash | 2 +- package/assimp/assimp.mk | 3 ++- 3 files changed, 3 insertions(+), 41 deletions(-) diff --git a/package/assimp/0001-code-disable-Werror.patch b/package/assimp/0001-code-disable-Werror.patch deleted file mode 100644 index 33867e61c3..0000000000 --- a/package/assimp/0001-code-disable-Werror.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 5146e1c4d58174e302dbdcf2a85c2023be1cffc6 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 10 Dec 2021 15:15:30 +0100 -Subject: [PATCH] code: disable -Werror -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Fixes: - - .../build/assimp-5.1.3/code/PostProcessing/TriangulateProcess.cpp:285:50: error: argument 1 value ???4294967294??? exceeds maximum object size 2147483647 [-Werror=alloc-size-larger-than=] - 285 | std::unique_ptr done(new bool[max_out]); - | ^ - [...] - .../host/opt/ext-toolchain/powerpc-buildroot-linux-uclibc/include/c++/9.3.0/new:127:26: note: in a call to allocation function ???void* operator new [](std::size_t)??? declared here - 127 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) - | ^~~~~~~~ - -Signed-off-by: Peter Seiderer ---- - code/CMakeLists.txt | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/code/CMakeLists.txt b/code/CMakeLists.txt -index e45bf8a2a..f71b6583d 100644 ---- a/code/CMakeLists.txt -+++ b/code/CMakeLists.txt -@@ -1167,8 +1167,6 @@ TARGET_USE_COMMON_OUTPUT_DIRECTORY(assimp) - # enable warnings as errors ######################################## - IF (MSVC) - TARGET_COMPILE_OPTIONS(assimp PRIVATE /WX) --ELSE() -- TARGET_COMPILE_OPTIONS(assimp PRIVATE -Werror) - ENDIF() - - # adds C_FLAGS required to compile zip.c on old GCC 4.x compiler --- -2.34.1 - diff --git a/package/assimp/assimp.hash b/package/assimp/assimp.hash index a778b79132..86a90927ed 100644 --- a/package/assimp/assimp.hash +++ b/package/assimp/assimp.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c9cbbc8589639cd8c13f65e94a90422a70454e8fa150cf899b6038ba86e9ecff assimp-5.2.1.tar.gz +sha256 b5219e63ae31d895d60d98001ee5bb809fb2c7b2de1e7f78ceeb600063641e1a assimp-5.2.5.tar.gz sha256 147874443d242b4e2bae97036e26ec9d6b37f706174c1bd5ecfcc8c1294cef51 LICENSE diff --git a/package/assimp/assimp.mk b/package/assimp/assimp.mk index 79865673ac..0b6034fb8e 100644 --- a/package/assimp/assimp.mk +++ b/package/assimp/assimp.mk @@ -4,7 +4,7 @@ # ################################################################################ -ASSIMP_VERSION = 5.2.1 +ASSIMP_VERSION = 5.2.5 ASSIMP_SITE = $(call github,assimp,assimp,v$(ASSIMP_VERSION)) ASSIMP_LICENSE = BSD-3-Clause ASSIMP_LICENSE_FILES = LICENSE @@ -39,6 +39,7 @@ ASSIMP_CXXFLAGS += -O0 endif ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \ + -DASSIMP_WARNINGS_AS_ERRORS=OFF \ -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)" $(eval $(cmake-package)) From peter at korsgaard.com Fri Oct 7 15:40:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:40:54 +0200 Subject: [Buildroot] [git commit] package/brltty: bump to version 6.5 Message-ID: <20221007154207.E592D86B90@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=82c6e87d5eaaf5b32aa340ab384f88539238cbe1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master README hash changed due to version update: https://github.com/brltty/brltty/commit/4bb7f50767b8b99ea75aebda82c84b8e0df167b3 Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/brltty/brltty.hash | 4 ++-- package/brltty/brltty.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/brltty/brltty.hash b/package/brltty/brltty.hash index cec074d8ce..9fc63714bc 100644 --- a/package/brltty/brltty.hash +++ b/package/brltty/brltty.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 bc7573b0d0ab865c36607945b64c209312405571788f3b409397726f6143eaa6 brltty-6.4.tar.xz +sha256 2f173535291ba39b5a9fc8d80c349234333d92042d95d6dd88796c98a02f316b brltty-6.5.tar.xz sha256 d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f LICENSE-LGPL -sha256 429be921e6bf783303a1f94cbb7f29dc4f0839e47efe38150b808f886028f4df README +sha256 c00c876cb4581a6b54fcc176f7e694896e5b52c4b015615566a787e8bc89fe69 README diff --git a/package/brltty/brltty.mk b/package/brltty/brltty.mk index 600bf596df..dc5a38cddb 100644 --- a/package/brltty/brltty.mk +++ b/package/brltty/brltty.mk @@ -4,7 +4,7 @@ # ################################################################################ -BRLTTY_VERSION = 6.4 +BRLTTY_VERSION = 6.5 BRLTTY_SOURCE = brltty-$(BRLTTY_VERSION).tar.xz BRLTTY_SITE = http://brltty.com/archive BRLTTY_INSTALL_STAGING_OPTS = INSTALL_ROOT=$(STAGING_DIR) install From peter at korsgaard.com Fri Oct 7 15:41:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 7 Oct 2022 17:41:39 +0200 Subject: [Buildroot] [git commit] package/ocf-linux: bump to version 20171122 Message-ID: <20221007154207.F381786B91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4f00b909b9ee637c255a882fdda580fb1a66a014 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/ocf-linux/ocf-linux.hash | 2 +- package/ocf-linux/ocf-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ocf-linux/ocf-linux.hash b/package/ocf-linux/ocf-linux.hash index 0bd0ea19df..747bbcab56 100644 --- a/package/ocf-linux/ocf-linux.hash +++ b/package/ocf-linux/ocf-linux.hash @@ -1,2 +1,2 @@ # Locally computed: -sha256 5113609d2c2c43fde962bec1238fe5a81211a751ebb0337b54a9804d40cfef53 ocf-linux-20120127.tar.gz +sha256 3d7984754d58ced5695889744caf1e18a53f5d2e35ed40cc04d3595e59b7431f ocf-linux-20171122.tar.gz diff --git a/package/ocf-linux/ocf-linux.mk b/package/ocf-linux/ocf-linux.mk index 01854fa73a..52169eda4f 100644 --- a/package/ocf-linux/ocf-linux.mk +++ b/package/ocf-linux/ocf-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -OCF_LINUX_VERSION = 20120127 +OCF_LINUX_VERSION = 20171122 OCF_LINUX_SITE = http://downloads.sourceforge.net/project/ocf-linux/ocf-linux/$(OCF_LINUX_VERSION) OCF_LINUX_INSTALL_STAGING = YES From david.oberhollenzer at sigma-star.at Fri Oct 7 15:42:14 2022 From: david.oberhollenzer at sigma-star.at (David Oberhollenzer) Date: Fri, 7 Oct 2022 17:42:14 +0200 Subject: [Buildroot] [ANNOUNCE] mtd-utils-2.1.5 is released Message-ID: Hi, mtd-utils-2.1.5 is released. Tarball: ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2 Tarball gpg signature: ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc Signed git tag: git://git.infradead.org/mtd-utils.git v2.1.5 Alternatively also mirrored here: Tarball: https://infraroot.at/pub/mtd/mtd-utils-2.1.5.tar.bz2 Tarball gpg signature: https://infraroot.at/pub/mtd/mtd-utils-2.1.5.tar.bz2.asc Signed git tag: https://git.infraroot.at/mtd-utils.git v2.1.5 This is a smaller, patch level release that consists of a hand full of fixes that have accumulated since the last release in January. Raw short log since the 2.1.4 release: Alex Henrie (1): mkfs.jffs2: fix spelling of --compression-mode parameter in help text Andrew Mellor (1): ubinfo: Fix --vol_id return code for absent volume id Christophe Kerello (1): nandflipbits: fix corrupted oob David Oberhollenzer (1): Release mtd-utils-2.1.5 Enrico Jorns (1): libmtd: do not ignore non-zero eraseblock size when MTD_NO_ERASE is set Frederic Germain (2): .gitignore: add new ubiscan utility Fix warning about unaligned pointer in jffs2reader Khem Raj (1): tests: Remove unused linux/fs.h header from includes Michael Walle (1): mtd-utils: flash_otp_dump make offset optional Mike Frysinger (1): fix test bashism Rafa? Mi?ecki (1): nandwrite: warn about writing 0xff blocks Sascha Hauer (1): mtd-utils: nanddump: fix writing big images on 32bit machines liaohua (1): nor-utils: fix memory leak Regards, David -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_0xBCE5DC3C741A02D1.asc Type: application/pgp-keys Size: 1713 bytes Desc: OpenPGP public key URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 495 bytes Desc: OpenPGP digital signature URL: From dumasv.dev at gmail.com Fri Oct 7 15:50:20 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Fri, 7 Oct 2022 17:50:20 +0200 Subject: [Buildroot] [PATCH v2] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221007155020.177431-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 62 +++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 26 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..c9d40e1cce 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -125,32 +159,8 @@ main() { find_args+=( "-type" "f" "-print" ) - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + export -f patch_file + find "${rootdir}" ${find_args[@]} -print0 | xargs -0 -r -d '\n' -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Fri Oct 7 15:54:34 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Fri, 7 Oct 2022 17:54:34 +0200 Subject: [Buildroot] [PATCH v2] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221007155434.178261-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + echo "patch file $file" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From wdouglass at carnegierobotics.com Fri Oct 7 16:27:32 2022 From: wdouglass at carnegierobotics.com (Woody Douglass) Date: Fri, 7 Oct 2022 16:27:32 +0000 Subject: [Buildroot] [PATCH 1/1] Force cmake packages to use makefiles Message-ID: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> Force cmake packages to use the "Unix Makefiles" generator in case CMAKE_GENERATOR is set in the host environment. This patch further isolates the buildroot build environment from the host. Signed-off-by: Woodrow Douglass --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..db9fdebb8d 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/to olchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ -- 2.20.1 From giulio.benetti at benettiengineering.com Fri Oct 7 16:28:17 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Fri, 7 Oct 2022 18:28:17 +0200 Subject: [Buildroot] [PATCH v2] package/udisks: install to staging In-Reply-To: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> References: <44ae3630-5f21-54d4-8d77-9cb9fa137289@grandegger.com> Message-ID: Hi Wolfgang, On 07/10/22 09:27, Wolfgang Grandegger wrote: > UDisks2 provides a Library API [1] for accessing the UDisks2 service > via "libudisks2.so". For development of UDisks2 clients, install to > staging as well! > > [1] http://storaged.org/doc/udisks2-api/2.9.4/ref-library.html > > Signed-off-by: Wolfgang Grandegger Just checked with buildroot/test-pkg and it works correctly. Commit log looks ok to me so: Reviewed-by: Giulio Benetti Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > --- > > -Changes since v1: > ?Remove note about the reported bug and add authors listed by > ?"utils/get-developers". > > ?package/udisks/udisks.mk | 1 + > ?1 file changed, 1 insertion(+) > > diff --git a/package/udisks/udisks.mk b/package/udisks/udisks.mk > index 2bf519a2cc..959333d01f 100644 > --- a/package/udisks/udisks.mk > +++ b/package/udisks/udisks.mk > @@ -10,6 +10,7 @@ UDISKS_SITE = > https://github.com/storaged-project/udisks/releases/download/udisk > ?UDISKS_LICENSE = GPL-2.0+ > ?UDISKS_LICENSE_FILES = COPYING > ?UDISKS_CPE_ID_VENDOR = freedesktop > +UDISKS_INSTALL_STAGING = YES > > ?UDISKS_DEPENDENCIES = \ > ???? host-pkgconf \ From gary.bisson at boundarydevices.com Fri Oct 7 19:10:21 2022 From: gary.bisson at boundarydevices.com (Gary Bisson) Date: Fri, 7 Oct 2022 21:10:21 +0200 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-6-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> <20221006095833.1116173-6-aperez@igalia.com> Message-ID: On Thu, Oct 06, 2022 at 12:58:33PM +0300, Adrian Perez de Castro wrote: > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > This imports a small patch to properly pick libdrm compiler flags, > fetched from the upstream repository. > > Signed-off-by: Adrian Perez de Castro Tested-by: Gary Bisson Actually applies to the whole series, tested on i.MX 8M Plus platform (Vivante GPU libs) and everything worked fine. Regards, Gary From prabhu.sannachi at collins.com Fri Oct 7 21:19:32 2022 From: prabhu.sannachi at collins.com (prabhu sannachi) Date: Fri, 7 Oct 2022 16:19:32 -0500 Subject: [Buildroot] [PATCH v1 1/1] package/redis-plus-plus: new package Message-ID: <20221007211932.481-1-prabhu.sannachi@collins.com> From: prabhusannachi Redis client written in C++ This is a C++ client library for Redis. It's based on hiredis, and is compatible with C++ 17, C++ 14, and C++ 11. https://github.com/sewenew/redis-plus-plus Signed-off-by: Prabhu Sannachi --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/redis-plus-plus/Config.in | 11 +++++++++++ package/redis-plus-plus/redis-plus-plus.hash | 3 +++ package/redis-plus-plus/redis-plus-plus.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 45 insertions(+) create mode 100644 package/redis-plus-plus/Config.in create mode 100644 package/redis-plus-plus/redis-plus-plus.hash create mode 100644 package/redis-plus-plus/redis-plus-plus.mk diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6..2f24fca 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2435,6 +2435,9 @@ F: package/libdvbpsi/ F: package/mraa/ F: package/synergy/ +N: Prabhu Sannachi +F: package/redis-plus-plus/ + N: Rafal Susz F: board/avnet/s6lx9_microboard/ F: configs/s6lx9_microboard_defconfig diff --git a/package/Config.in b/package/Config.in index e3a34d6..8235864 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1491,6 +1491,7 @@ if BR2_PACKAGE_POSTGRESQL source "package/postgis/Config.in" endif source "package/redis/Config.in" + source "package/redis-plus-plus/Config.in" source "package/rocksdb/Config.in" source "package/sqlcipher/Config.in" source "package/sqlite/Config.in" diff --git a/package/redis-plus-plus/Config.in b/package/redis-plus-plus/Config.in new file mode 100644 index 0000000..3c23dc5 --- /dev/null +++ b/package/redis-plus-plus/Config.in @@ -0,0 +1,11 @@ +config BR2_PACKAGE_REDIS_PLUS_PLUS + bool "redis-plus-plus" + select BR2_PACKAGE_HIREDIS + help + Redis client written in C++ + + This is a C++ client library for Redis. + It's based on hiredis, and is compatible + with C++ 17, C++ 14, and C++ 11. + + https://github.com/sewenew/redis-plus-plus diff --git a/package/redis-plus-plus/redis-plus-plus.hash b/package/redis-plus-plus/redis-plus-plus.hash new file mode 100644 index 0000000..93e58e2 --- /dev/null +++ b/package/redis-plus-plus/redis-plus-plus.hash @@ -0,0 +1,3 @@ +# Locally calculated: +sha256 a49a72fef26ed39d36a278fcc4e4d92822e111697b5992d8f26f70d16edc6c1f redis-plus-plus-1.3.5.tar.gz +sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE diff --git a/package/redis-plus-plus/redis-plus-plus.mk b/package/redis-plus-plus/redis-plus-plus.mk new file mode 100644 index 0000000..145fcbe --- /dev/null +++ b/package/redis-plus-plus/redis-plus-plus.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# redis-plus-plus +# +################################################################################ + +REDIS_PLUS_PLUS_VERSION = 1.3.5 +REDIS_PLUS_PLUS_SITE = $(call github,sewenew,redis-plus-plus,$(REDIS_PLUS_PLUS_VERSION)) +REDIS_PLUS_PLUS_LICENSE = Apache-2.0 license +REDIS_PLUS_PLUS_LICENSE_FILES = LICENSE +REDIS_PLUS_PLUS_INSTALL_STAGING = YES +REDIS_PLUS_PLUS_DEPENDENCIES += hiredis + +# since version 1.3.0, by default, redis-plus-plus is built with the -std=c++17 standard +ifneq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_8),y) + ifeq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_5),y) + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_CXX_STANDARD=14 + else + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_CXX_STANDARD=11 + endif +endif + +ifneq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_4_9),y) + REDIS_PLUS_PLUS_CONF_OPTS += -DREDIS_PLUS_PLUS_BUILD_TEST=OFF +endif + +$(eval $(cmake-package)) -- 2.7.4 From vfazio at xes-inc.com Fri Oct 7 23:50:02 2022 From: vfazio at xes-inc.com (Vincent Fazio) Date: Fri, 7 Oct 2022 18:50:02 -0500 Subject: [Buildroot] [PATCH 2/2] package/busybox: redirect errors to /dev/null In-Reply-To: <20221007235002.79221-1-vfazio@xes-inc.com> References: <20221007235002.79221-1-vfazio@xes-inc.com> Message-ID: <20221007235002.79221-2-vfazio@xes-inc.com> When busybox.mk gets read, pkg-conf gets executed to determine the location of relevant libraries. When Busybox is built with per-package directories enabled, a number of errors related to executing pkg-conf occur because directories have not been synced to provide pkg-confg at the point when it executes. These errors occur in stages prior configuring the package and are of little consequence so redirect the errors to /dev/null. Signed-off-by: Vincent Fazio --- package/busybox/busybox.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/busybox/busybox.mk b/package/busybox/busybox.mk index ef628e90e9..0dec8d6d60 100644 --- a/package/busybox/busybox.mk +++ b/package/busybox/busybox.mk @@ -79,10 +79,10 @@ BUSYBOX_DEPENDENCIES = \ # support for NFS mounting with BusyBox ifeq ($(BR2_PACKAGE_LIBTIRPC),y) BUSYBOX_DEPENDENCIES += libtirpc host-pkgconf -BUSYBOX_CFLAGS += "`$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc`" +BUSYBOX_CFLAGS += "`$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc 2>/dev/null`" # Don't use LDFLAGS for -ltirpc, because LDFLAGS is used for # the non-final link of modules as well. -BUSYBOX_CFLAGS_busybox += "`$(PKG_CONFIG_HOST_BINARY) --libs libtirpc`" +BUSYBOX_CFLAGS_busybox += "`$(PKG_CONFIG_HOST_BINARY) --libs libtirpc 2>/dev/null`" endif # Allows the build system to tweak CFLAGS -- 2.25.1 From vfazio at xes-inc.com Fri Oct 7 23:50:01 2022 From: vfazio at xes-inc.com (Vincent Fazio) Date: Fri, 7 Oct 2022 18:50:01 -0500 Subject: [Buildroot] [PATCH 1/2] package/busybox: add patch to silence build errors Message-ID: <20221007235002.79221-1-vfazio@xes-inc.com> As part of pkg-kconfig, the .config file gets regenerated after fixups. When Busybox is built with per-package directories enabled, the toolchain is not available for Busybox's makefile to determine compiler capabilities so certain calls will fail and emit errors. For now, assume the following are true: Buildroot will not use GCC < 4 Skip a call to cc-ifversion to avoid the following error /buildroot/output/build/busybox-1.35.0/scripts/gcc-version.sh: line 11: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: No such file or directory Target system is linux Skip a call to -dumpmachine to avoid the following error make[2]: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: Command not found Signed-off-by: Vincent Fazio --- ...ags-assume-GCC-4-and-target-is-linux.patch | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch diff --git a/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch b/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch new file mode 100644 index 0000000000..567d46704f --- /dev/null +++ b/package/busybox/0006-Makefile.flags-assume-GCC-4-and-target-is-linux.patch @@ -0,0 +1,50 @@ +From d384e999e1dff473f2bf084c6a9b9730ad39b878 Mon Sep 17 00:00:00 2001 +From: Vincent Fazio +Date: Thu, 6 Oct 2022 13:16:34 -0500 +Subject: [PATCH] Makefile.flags: assume GCC >= 4 and target is linux + +As part of pkg-kconfig, the .config file gets regenerated after fixups. + +When Busybox is built with per-package directories enabled, the +toolchain is not available for Busybox's makefile to determine compiler +capabilities so certain calls will fail and emit errors. + +For now, assume the following are true: + +Buildroot will not use GCC < 4 + Skip a call to cc-ifversion to avoid the following error + + /buildroot/output/build/busybox-1.35.0/scripts/gcc-version.sh: line 11: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: No such file or directory + +Target system is linux + Skip a call to -dumpmachine to avoid the following error + + make[2]: /buildroot/output/per-package/busybox/host/bin/x86_64-linux-gcc: Command not found + +Signed-off-by: Vincent Fazio + +diff --git a/Makefile.flags b/Makefile.flags +index c34356230..274527954 100644 +--- a/Makefile.flags ++++ b/Makefile.flags +@@ -45,7 +45,7 @@ CFLAGS += $(call cc-option,-Werror,) + #CFLAGS += $(call cc-ifversion, -eq, 0404, -fno-strict-aliasing) + endif + # gcc 3.x emits bogus "old style proto" warning on find.c:alloc_action() +-CFLAGS += $(call cc-ifversion, -ge, 0400, -Wold-style-definition) ++CFLAGS += -Wold-style-definition + + ifneq ($(CC),clang) + # "clang-9: warning: optimization flag '-finline-limit=0' is not supported +@@ -184,7 +184,7 @@ LDLIBS += $(if $(SELINUX_LIBS),$(SELINUX_LIBS:-l%=%),$(SELINUX_PC_MODULES:lib%=% + endif + + ifeq ($(CONFIG_FEATURE_NSLOOKUP_BIG),y) +-ifneq (,$(findstring linux,$(shell $(CC) $(CFLAGS) -dumpmachine))) ++ifneq (,$(findstring linux,linux)) + LDLIBS += resolv + endif + endif +-- +2.25.1 + -- 2.25.1 From thomas.petazzoni at bootlin.com Sat Oct 8 06:34:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 08 Oct 2022 06:34:30 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-07 Message-ID: <20221008063436.C38E28258A@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-07 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 2 | 0 | 14 | 2022.05.x | 19 | 11 | 0 | 30 | 2022.08.x | 14 | 10 | 0 | 24 | master | 202 | 397 | 0 | 599 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 21 host-sentry-cli-1.59.0 | 20 sysvinit-2.99 | 18 crun-1.5 | 17 systemd-250.4 | 16 host-f2fs-tools-1.15.0 | 15 btrfs-progs-5.16.2 | 13 autofs-5.1.8 | 11 igd2-for-linux-2.1 | 11 linux-6.0 | 11 gobject-introspection-1.72.0 | 9 elfutils-0.186 | 8 libarchive-3.6.1 | 8 host-binutils-2.38 | 7 libglib2-2.72.3 | 7 ocf-linux-20120127 | 6 unknown | 6 dash-0.5.11.5 | 5 host-gcc-final-11.3.0 | 5 host-go-1.19.1 | 5 host-rust-1.64.0 | 5 linux-pam-1.5.2 | 5 ocf-linux-20171122 | 5 host-pahole-73383b3a39afe86... | 4 batman-adv-2021.4 | 3 casync-4ad9bcb94bc83ff36cfc... | 3 fftw-quad-3.3.8 | 3 fontconfig-2.13.1 | 3 gerbera-1.10.0 | 3 hdparm-9.63 | 3 libcap-ng-0.8.3 | 3 linux-5.10.145-cip17-rt7 | 3 memcached-1.6.16 | 3 open62541-v1.3.3 | 3 perl-5.34.1 | 3 toolchain-external-codescap... | 3 wtfutil-0.41.0 | 3 assimp-5.2.1 | 2 azure-iot-sdk-c-LTS_07_2022... | 2 brltty-6.4 | 2 dahdi-linux-5c840cf43838e06... | 2 efivar-38 | 2 fs/ubifs/ubifs.mk:49: /home... | 2 gmp-6.2.1 | 2 host-gcc-final-10.4.0 | 2 libglvnd-1.4.0 | 2 libostree-2022.5 | 2 linux-5.10.145-cip17 | 2 musl-1.2.3 | 2 openpgm-5-3-128 | 2 tcf-agent-1.7.0 | 2 tealdeer-1.5.0 | 2 valgrind-3.19.0 | 2 wolfssl-5.5.1 | 2 zstd-1.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 acpica-20220331 | 1 acpid-2.0.33 | 1 android-tools-4.2.2+git2013... | 1 augeas-1.12.0 | 1 bcg729-1.1.1 | 1 boost-1.80.0 | 1 cjson-1.7.15 | 1 dhcp-4.4.3 | 1 dropbear-2022.82 | 1 dvdauthor-0.7.2 | 1 exempi-2.6.1 | 1 f2fs-tools-1.15.0 | 1 file-5.41 | 1 flann-1.9.1 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gensio-2.5.5 | 1 gitlab-runner-14.5.1 | 1 glibmm-2.68.2 | 1 google-breakpad-c85eb4a59b6... | 1 hawktracer-2ec19d7192334414... | 1 host-binutils-2.37 | 1 host-gcc-final-12.2.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-python3-3.10.7 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 host-util-linux-2.38 | 1 json-c-0.16 | 1 kvmtool-f77d646ba01d04be5aa... | 1 lapack-3.10.1 | 1 libcurl-7.84.0 | 1 libdill-32d0e8b733416208e04... | 1 libnss-3.83 | 1 libopenh264-2.2.0 | 1 libopenssl-1.1.1q | 1 libqb-2.0.6 | 1 libuhttpd-3.14.1 | 1 libvorbis-1.3.7 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 lttng-modules-2.13.1 | 1 lxc-4.0.12 | 1 matio-1.5.22 | 1 mesa3d-22.1.6 | 1 mongodb-4.2.18 | 1 mxs-bootlets-10.12.01 | 1 ndisc6-1.0.5 | 1 nodejs-16.17.1 | 1 ntp-4.2.8p15 | 1 openblas-0.3.21 | 1 openvmtools-11.3.5-18557794 | 1 package/qt6/qt6base/qt6base... | 1 php-8.1.9 | 1 python-ujson-5.2.0 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rauc-1.8 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 rtl8723ds-76146e85847beb242... | 1 sconeserver-8d1935919a20133... | 1 sqlite-3.39.2 | 1 stress-ng-0.13.05 | 1 sudo-1.9.11p2 | 1 uclibc-ng-test-0844445e7358... | 1 uqmi-0a19b5b77140465c29e2af... | 1 wavemon-0.9.4 | 1 xenomai-3.0.10 | 1 xfsprogs-5.14.2 | 1 xvisor-0.3.1 | 1 zabbix-5.4.9 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/bf5010120eac4c0f4702968ce637463cda643a73 | aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e1951ff6fb915f66283814c01831fd612e37211f | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/85f0e19d1fd3c0840a1c8dc291e503e5e9b546e4 | sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b5f0d5b3a7ea6503c5927453f38829005e82abe0 | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/421e971dcd40f5aa56910d46fb4f13f45e1c33c5 | mips64 | acpica-20220331 | NOK | http://autobuild.buildroot.net/results/550b4b9d4650a77d969413f3d83580978965c39b | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/3c88c9b4261a0d1484ae2fb7588bc508c852f4c7 | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/197999e8f63cfe79892153f69c8ebd48d1ac397b | sh4aeb | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/0d523af1fd58d09ed05cf6bdfbe6e0c5fea91b7b | ORPH mipsel | assimp-5.2.1 | NOK | http://autobuild.buildroot.net/results/24bf4d156a8967bcc721be977a94a7ab74114b04 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/6d8bca700b32cef4f67a73f6b6b24e93967f2593 | ORPH mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/364cc88b98f913f6cf3f44dedbe5626da0970a35 | armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/afac24e4d3d2460684497a99e4cd6e99af4711f2 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5050a3e88d07f6c02c10d5874694bb7b924bdcfb | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2451c08a5636ea1bbd09df7571384d7fcbb62f7e | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a2cdab2993fae7466de1f084665fdcab3372197c | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d66ceec325fe87330835e23a67aee41b8e4a0720 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3d0601e71e7b70946ec50ce82148b67883b87e87 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ef69f4dad4815141dd3cc618c91a7eecb5de876e | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/1d6cc97d21926fe7a979202e0b09295262f5f975 | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/aa2e8c97a39426fd4623b33902632af4f32d357f | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a6b5b3369d148bd05b37e840d0c4c3a8b4ae9487 | xtensa | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/be8ee4437c2dc498b56be7d6464cdd51ff8d77f0 | mipsel | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/f28f8754dcacd054ce99e27a7fd8bd19a68da3b6 | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/0fae9c64db49e0c269d810c0bbdb3e3620f9a7da | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/cd84ad47e85ff462b2b5dc4a76412bbbe2362725 | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/020f7b5b7658585c4593fd3928683a53a210436f | riscv64 | bcg729-1.1.1 | NOK | http://autobuild.buildroot.net/results/1dada1972554bf805c3756994b0d5671410d8618 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/589828f093fca8583d23e5664a54553a159a36dd | microblaze | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/e626c106bc0178f7ee7047fc97c25a6d08ee0710 | mips | brltty-6.4 | NOK | http://autobuild.buildroot.net/results/b196f09b060a4841ae812d1ac31282657730455d | microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a5d8e2fa23c7c2b5cd686364e9b57ad0fc3c4508 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8bb2698bb972b609669873261f81696404f52620 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f799c0b446c8b84df3ee1778b9e6d5f75d8f85f1 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/986ccb1f141a38644788e8d53d5227fcff8cf4f9 | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c5197477083427174f2d73ffcb3e068d8c12661f | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4bbfca89090528496ebd6edf8a5c15848457029c | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/544514c1e0becb6ca6292aa5524ea40394e1cdd7 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/557ad252b25fc4d0dcc45383dd52c316cce13dab | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1b9e96e06b2b798837b5448fc1d61d50ca494bc6 | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/3df8b483785c2b0dd00a23819bc3a3f04c8e373d | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c6fa0f340e5ba9bbc0b6be6334f8a711bd3ee2b7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0ba373aef2ebbd824c577c23543e0316460cdafd | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c308b73868999b4cc5d81b6389f13b42c9c49f11 | ORPH microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1b4b8235149c647b477f522c99738fe80981d33e | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/545b6a5c28488d15cee3e5abf06f9fa369a7ca6c | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/0a3ee6b02d0ba13230ee5ceee5fa4ed960d37d26 | riscv64 | cjson-1.7.15 | NOK | http://autobuild.buildroot.net/results/cd983f96f1e80d3461fc620314c9ece5e062f38d | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fad67739c18a3659df27ab778b90875d6a23516 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/611ca11ee4a7b86fcb76389fd3d9697dde8b5892 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c17f7c77afcefd04e53b965bf87629a590b10f8 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/01f4dc8770b6b8d0f9c209a58e884c6d16b647f5 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8add1c37a6094108f637506588b4a3a08996b5a3 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d448abb6f3e6b1dca22cdb0196e21efacb87da9f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c4bc8f9d6584f591854072bcbe07377f06f59ba | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5b5abae01ddd40df9b13119afc6c2e722986cf27 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dd56873131dc4a027be0a2739ff9c4b7ece16b75 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20f9836f6e9c26d79ebb66460a6cd3316ae4ca39 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9f92c0a13fc5d4b68b302ebde26eb526f0f4c1ef | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2d4abb4f3755404cba72d36606bcc0337078ec97 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8886d6bcc2782f1c9b7024f58678225c21627542 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a25c4d83f4b7e31e78596bc697bd5baa0e4f4c59 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7f452bfeef453b9f1138afda125a044ebd4f7e67 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a155dac73499f91d86fd1260790b46cc5b8a8d19 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7cb641997b291ceb24292e14c1de50f5a9d796b0 | microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cc57078f019771d816825dcebdbc9287175637ea | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3ca838db3a784026b8041ec9a5fc15b89cfd1b7e | m68k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0343fdebc6bc77272c6d5c51d4026a8e1e87ba53 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/4c02deea65c4aeab3ef1d7f887389789ae051b35 | ORPH aarch64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8509bd65ff728309a3c7d38e52f39a3ea97a0238 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/2908eb59dd283dfb198d6720f92459d392a7e2ff | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f788bb556b6f97c6141a7c7ce657316604f9ec84 | ORPH sh4aeb | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/4feddd2ed34f6e8c0c1a4832fbcbab347e437783 | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/ddd5e88f15d12a079a53b27891c1b2cdb20b3e8f | sparc | dvdauthor-0.7.2 | NOK | http://autobuild.buildroot.net/results/6bafca2f1903ba9c8e06a28213ed4b6434aa5069 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/79bd2ff1ede0ac545d439f0134fd03b6c884bfe3 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/e24079373d1cf27057e2c2264c5e88a642aa324b | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/31cee9d705cc5c7e89aac71c62b33eb07b9525ca | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/bf6c301571b4ec0c861cda70192c4cf3a69f6c21 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/70741d0e8e369ee6e4ebbe97e43dd21f07f3184c | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/34e620c15e19bda26d2ffc8aee420fcec2dc2bb0 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/7f3434fc41faa9c9ad7d2132324e8d5f4df5dc0d | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a7b1a906b25825049f33f06833b9d9c7cff4fc0a | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/51475f22ca39c9990eefc75d280622ba23a4922f | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/06ff8e5ce8a8369c425bc3dce925ff49cba38b0c | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/e9d5e440102cf7aca3658fa62933f3acc3f31e45 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/34fd1d0a67ceef64fc51a06b03c768e6af1a23c4 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/a912e6a8e4f853e9d6b82203adbf809a32c7d059 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/53d0805a6cd431b90370d5eef5bc78c015f8c2c5 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/3b5e393133e5201e8a28fbd7b6edcd3f310582b2 | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/5873b40bbf1d31f63d45436117854df7b7d04046 | ORPH mips | flann-1.9.1 | NOK | http://autobuild.buildroot.net/results/cd5a4b1f8bf188dc797acbc25b28f0724e17f198 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/70e9c4ffef464e4c842a82677904719e423d3caa | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/3b98a0747c5e42774cc41f8c3ea44ecd84327a12 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/30814da3dda48fb042ebcfc013817c7d6f065ceb | ORPH microblaze | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/cd8f9c883f6810b9468707a33f7fd45f304ee4ca | powerpc64le | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/68169d9708e871d5c194ad817e788ec93435ddb1 | i686 | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/f2f7ef95c9841f738534dc2107f084f16dae5d5c | powerpc64le | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/87f27753bea1fd2f7483777331ed9fd7f716072e | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/7bcba81ae984ac0267950a951ec1386e7864220a | microblazeel | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/d8b0c5278dbee7e332c51887906a7b395c7a9862 | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/845af223698c0f4cee97d27d9519fd8daeb9bae1 | nios2 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/0b34c470db40b87318021303bf467e6f15787352 | sparc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/e7f8ccd7e1399f0f4e780ba7633964bb54cd492c | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/0cebcb314f2c04a83124255e560a9377227ed285 | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/74b8dea50d861717335052121078dea7553b0878 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/acc161ddfe1edc50ba50361be7427b48c6e72bdb | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b624bedfe83a74b37727b35164f53c1f29c72517 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cbc83e8fad4ddeba89b40f83845fdab34323a949 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c120b7181de47579aac512b9f7d2c3e5a86fb807 | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/50b159096aef8b9ccdb87e8e3f95bffc9b69db68 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00b702cbff8c9b094c9cb2a50c88048d2817c911 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef53b62b2d94248c73156f33a03e1cd92797c691 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2045fab4c2da7a9b42cca936bd4ea8a59d75f811 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51205f766deca4148bb5151554795a8e2db2a05c | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd508576297b7bae4e5c2ccfc7b01f53c831d950 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77247eff940e4dd4f0642c9d9dbc56eefb43df70 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1928e0642eedf01a5a709441e38880b4bed3504e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d12053c2a4db50ab5559d764dcc0dbe31862b7b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a7ad9772aaaaf4d044e3e2f28a6ea87a5a4a08f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32176c21d8faefa2824a2ee82569168fe2604c7e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b3004a700e0ab15a1f42074c3be64b63da7ec25d | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/644feb1bfad95d8bbb39bcaa1f6382f965e39fdd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95a19a1f03a0912ffb16557b66ac0126ed46e551 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d221fe173ee155743e32b98bf05f7aebf1e26fec | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10dcdb66e756fd4d8e7c77c504ae8357616c2c42 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a45c545789028cb13c7e27e6630daff3487c543 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c633bd7d3ef5a69927d3c93754cfe783d6d2181 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae1d98b803bc2890ed9e8feba741bb5e10bc3c36 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e897d293e53fb2aad5232cb236b547dd43924848 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9722a67511e895a74d78ee8db051af8b39945192 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc184ebe9d79f4ce7e1e47cccb62d6945b79381e | or1k | glibmm-2.68.2 | NOK | http://autobuild.buildroot.net/results/c6f22c12de8d08576f451d8951b385319b5040b8 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/6c24501f1fce84c6653855d392e682730888fc0f | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/a57ccffcbfce43518dd3f7fcad96260d7134a56d | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/bf839cdb52fb36eb68c890e2127ef6d3052a4038 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/008b257738d8f97ddbc9948d5fe49c108aa0ea3d | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/64a54c4721d0553334b5e5fb84ed40b5059580c7 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/87a9fa520cc563a72aa0e58b5476dc8ca5063ef1 | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/53ad6dc053dd8e50c4fe48b758e08c0e70048d37 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/2714e1a99f2b0f3d69132b61d9da696d1eee44ed | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8589b19056f3d3cc5be3d595099e8e769997b60d | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/ada53ddedb3949787d012d815fedf9b46b117f82 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/f33caa077069d245821d58fb30959d705f839189 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/838b0b9ca8bf526ecbf14a3edee6d43a7dc790ca | i686 | hawktracer-2ec19d7192334414... | NOK | http://autobuild.buildroot.net/results/c356073750963a5998c0419c258e1a8846a9d6f0 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d7df3789a9aec61d212144aad37271699426c0f4 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/23651f9197edc9bb08c054afdaf37385b934ca92 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/96d6f5f5bff6d9ee9600389c8f1c0348cd798bdd | x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bc9b1a6f0af7503857d50a94bd1c91f4a2d775be | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d197145164c41549feb5954556b213ac3dccc7d8 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6eb3df8ece964d52f4c31f528e9c392d6ffb0d09 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2b237ac6b776d22efbf2a8dc350ce70f59790216 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ee768e8cb250ba9eef50d90522f78ce310fcf087 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/062b9c142238de7f839664b0e5334abd50bf5aa9 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c1a81184abcb6d975304194e70503e45dc7d69f5 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/17cd61c1ef1edfa2fa4e383e5a27ad0372331373 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1da3bdde35ec869d1e7bb1e84571c9a2a8f550d4 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b8e8c8280cb9f78eb7e906fb83f50029c08ec16 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/45e319116161d933570f73048f725345b5e8c7ce | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/238dcff45bcb9ba41c48416c92ee6b89fce82663 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/84016a6ddea8082b3505118a7212a56617d4fefe | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1d8ef493e9e598d39768b19bca2ef639e6515015 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1acf3879bbc794153bb71ee05a60457e53d3cfe5 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bcadece65f023a7094b239158f64b6c8bde4e5ff | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1b8126de7e02f6bc22d08b4a778022e6ea73bb3a | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/98bcb8c41c0182776ee4d396f030b6bdfb4a3032 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/64579724bf961e758c3b16826a9bf1439c56c6fc | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89adc2fba42ce9adb6b8a3a6226c51e85d4c0b5a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/23d0d972ba480c97ff141ac0931b2f547a828283 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d6b0d69cc7a708f24f82290f82426fe7f7956b36 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a1e567c65ee7a39bc7b4039def94b5ae908b6d10 | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/a710d3d57aba2faf004db3dccde413356b762444 | riscv64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/269a5d402fa945cc9054a8d2c8bf8e2a92e16084 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a8c72e3d951258902c8e471be8fc107f57f1b724 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d0f89bf458e3d1bf93a60e1a8260c01c289fceb3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a38ca97af144e8f94f01aa1473524859a3e0ec5 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/be0f0173b7afcf0c6ef384dff0d0c5193f006710 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b306483aa4c71ea2cdd504070c041149b92e4e7a | armeb | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/d4b456eda263fba50bef9c9e84d0662eccadc11c | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/09bec822b03770327baed077c7cca15f6e430dbb | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/39558d541457f34775e19595eb689b1a0c138aaf | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1c0543df6eeeac8b897ffce5589eae47ca90a748 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/31f48f3a7f5448c9365679f08033124681b41fe8 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1b56337d3bc629c56df550c2edeffaa24ad96864 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f72b84aefe20c1a01b2a9e2307fd737a21b890fa | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/36cb60e5016cd40b685c2d5f51a003944bd2196b | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3c5f25bc848967297e2eb66b1539e5e0536bcb5b | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/501a6208580d1d7672ffbd060eb61fd20cd3084f | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/a5b3b32a40a4f8135b620319ff63129430bda588 | aarch64 | host-python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/8b7f5edbe96f1f41e7fe653e52ea8e0ad9045110 | mips64el | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/428b769b18e4b87e6d197709caf1a4f11ac686ae | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0d923a3312157070c117464adc56b15d23cf62f6 | powerpc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/63a8e34b44a830c4135052caa3b6e571adc8cea1 | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0fcaa47d16ff917b549ce6156db1ccb87b7d4e13 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/cd78f541564a119274b21e03ad7f5774e258b5e6 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a3394795ad5d56337e33e09f29cdec1ea7cd5cf2 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f730e10d15eab108c958d8cf36225725f83b45b1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/29727070465f44b1747d45915c45bcf91b71ba18 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/762f5b6b1244fd321133bee0e34deca53ef48d2a | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/81a2f8beca553f3fdab5cc7eba5e62440f92f641 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8b9bd74bfba81d3d0567dcb8cb136f03b64ca77e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7a1f661965c4268d502bbfd437891b6867a480fd | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2036c091f6bb6a072d2e8e9d42c796c3c9149758 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5f6ec8b594b03e8f1e3d398ebc2f08b32c19d89 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/56a2ade0fa9b05536279af4a548edb1740d47b15 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d469237d5108533c75594e8cfaf2a51d9559741c | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed502335322c61a138490de61ead0a39f369dbe7 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7f78ffb7a6731e976e826b996941d2fa18216547 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/94a6950cb659ba352ca4044d9f74639b1437b3ef | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/20007fdd7343c783eaed3574fad747e21164f34b | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7cc6112b92d1a6cf6424836c7be929e79730b9d5 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b0c1d3aad56e66eae71af22cf017f4c613bfba8 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6405f46818ae63054bec4cd245377064746e0e78 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1bd1994481b537415bf89dc42943b7067015cfac | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/12e91668e67334b13465b5baa46853bb096284fd | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7a9c8a914fd76cb52910171fdb1e75e1032350ed | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/8ba164e8253e6a688c7c102f758e00d96ec03c09 | ORPH riscv64 | host-util-linux-2.38 | NOK | http://autobuild.buildroot.net/results/52664bfde4b73fd6e6d56b19a5df916c91b0f359 | ORPH aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/adbc27305550e6fc2f2450cd630675d4eae24cfd | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0b7d87044d83e43e5b0e01f1f2b4f8d03d633b29 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a30aae483bebb12b15332fc5b42d53ea406892f4 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cddb4dfc1cae9101f1b54e09bfdf5053379ac46f | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/24443a24116bbaafa47dd8880951a1b8395c7b1f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/465c8648026545912e8b27d0ebdf2ec4b2fe5bb9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/eb697e8a8e15cf3553571e767996ce2e8ccd3496 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/489797c0c3f154456008b65a5418334d6a56f4d2 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c6168bf8d93661b693fcce0b9c57c83295ecb2f6 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8b12331319c2111718ca2a3e4eedab441310ca7d | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cf9fe32b2c368c2c3bb579b06cdc89b9e4bbe68 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/f44007acf4463b5b11a1358baffa8393464354ae | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/a40f5aafd3baf648cdb0a7347925356045631569 | riscv64 | lapack-3.10.1 | NOK | http://autobuild.buildroot.net/results/122ce02350406d8c6aa692d81bd16cf09508dd91 | armeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aa46c9135561375edfa9a067dcccbeee80eb9384 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4b06cdb299f55c7c3fcf31502ecd59e3c2a911c3 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dbaaf1d57f1bdc29bcc31b9ca184c69ea782b590 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/e4fcc38eb122b63fcbe67d886e1d3ed2e8befa53 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dcb80bc9568b8f102726923c449088e5575383b7 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4be479f881fa28691393ca33ffb09cb92e83cb44 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/98948a0c73f755f6f1d5572b35eba60d6652395e | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1ac495dd97bd801da4640b36ddd4e1e6d0efed2d | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b251046479f64fdc74f7fdbfd09bec90610ae6a3 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/13653bb18b83dd37c2bf64dd8ef2c961f9f261a0 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4e14ecc579975b92a937bef6ed1c619a10fa4cbf | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/426031fa433bda4ee08f8cac71b3d8d4748b870f | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/98054853aeaf6205be9ce7a5b69461ee9ea8ca56 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/140f742613994672c369042cd64370018b70e454 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7e51509adc062c80121d36cbd040f7defd4ca772 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b40b53849a46d22a2fc57dcd1257065215d22cec | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b5bcfc440822d07b8cd11b30d5ad2f7c0be1c436 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9bcdceb572484f8a14ef50ad38f2a5b24f876fb6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b20db550f713968d403a2840683218542753a445 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b556a0b89199986778bf26438901b1ea640c3f45 | microblaze | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/960c98eba5606ba61f52477a6de1a266f037c020 | ORPH arm | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/f523dbdab67c1db33632c9fcced6302d0563b5a3 | ORPH armeb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/61e474d00a7de8fb1acff9ffdee768b7edba0925 | mips64el | libopenh264-2.2.0 | NOK | http://autobuild.buildroot.net/results/33e39b33ac1499e66b21e99785e0026a8eab58ed | or1k | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/8386318c1c20ad5066fe90cad384331fc1296d5c | aarch64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/31715bf0a3724d07a74c5ede5d91bc3dc13190d7 | mips64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/6ed8ef43a37906a4d1e3675fed2a4defbcba883a | arceb | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/48d69803ac3703898da5de0a27fb381b1c4ab7a4 | mips64el | libuhttpd-3.14.1 | NOK | http://autobuild.buildroot.net/results/f428fccbda0aad7e81a8f6a58f6deea04da68504 | powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/a5f040ce4fe5d0b1294e118bcae4e73418300cc6 | sh4eb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a3b162613c19e9f4a0a895b278e9c98233c30990 | ORPH mips64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3bf645a3cd198cfdd2657d2bb88e4f260dff5bcb | ORPH microblazeel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8ac169dfb36fbf62a86b00afba6bd265c55e42d2 | ORPH arceb | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/6a7ba136817b7e43dff944ed34433a8afd7f4626 | ORPH i586 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/27c33fd3b73b3e267793a598aee5a94f0f79bbd9 | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bdf60e92a0469f89bdb6a24db6ace43517a946d0 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/14f11c085ece2148de93bee5103c34decbd3028d | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bd1bed3fcc284b19a78dfc321c3ab1085961e55b | ORPH s390x | linux-6.0 | NOK | http://autobuild.buildroot.net/results/63dc74d21b1a7d14b520fc7ee50f6c7719136fbb | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/81bd3d3164bd32e8ba5cd0275cb0835b51f23f52 | ORPH i686 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/d7c2383515b0d9d45b3398e270da3ff2af922eb6 | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/a92e0d7fefbfc3f800d1ab711d7834096a6aec5f | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c7df19ad9104d7173a7171aeb38b13feeaa4ed3c | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/aeae7a6675e7877862a77412e7df8335b532d113 | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/151f1a4a7bb658a1b75251b1cd828d8fd78ec5bc | ORPH x86_64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c520606577bd7822ec733fdbd03b51a60d42ae2b | ORPH s390x | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/b4efabddcf8c4408c433b5cc043cbd3dcde92d28 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/80ca504ec55ae2f38303376ee99a5824e45dd8ed | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/568e34f2f696af9595cac358026cef399378dc8c | ORPH mips64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/9e304354471f866e8016d472ccc4aa95ad703905 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/2690b22bbf2a83025689094027814f1d0dbe98e7 | ORPH riscv64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b04cd2c0aeea419096ee233ae8568361d690230a | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/aa4daf3d6126570d2ec7cdd5fd3b5aac4bbbe55a | ORPH or1k | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/7645948fe9cec15b6f510b1521bdb3db2247a77b | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/2a6544a5d789fcf75a0c7a96f0cfa69760d0f1d6 | nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/53ba7a9fc655b135e33974f9a2dc0fd1ebfaca5d | aarch64 | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/5d24d2bfa7ede5a756ab6e0b9ceae59f9387f86a | ORPH microblazeel | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/fc55703a70be76c46800c1942028a292c9c30912 | ORPH or1k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/9f6e28cbc448a683e42869e10d6ea6679146d3ed | ORPH mips64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/56ce9ac1aabae2d15df1dd26dbcd2f4fb0c366ec | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/173ee60cee40a02f3ff8bc7f53d366d2a7555989 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/06217a1bae3893f16c210254be190d001b4cf1d1 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/b03f52fb470511afab545848c042c8778672cd3f | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/4ba4bb3d671d5eeceef1299ceee91b8b51b5352f | ORPH arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/edad6a0f467a54c6bdb5da19c6deec69f10d974a | ORPH arm | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/168c5785f14a2f8777e79f1ab1b74a25fb48ddbf | sh4eb | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/66990d287d6c007b9961e1c2f673ef3e4969b3d0 | ORPH i686 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/115bcfd6d2dd8af8b872f9fb3406e393a13e6833 | ORPH riscv32 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/de7b6147fd6525d45234a84f16fac6997f91f322 | ORPH or1k | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/f644ae349ac7b9a87c6d6a23816da16124a84230 | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/0779b59e58aafd0e4f1a3a60d7e3f9941312a18a | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/5b541874d2536aab3d3f69774019b5e201470d57 | ORPH powerpc64 | ocf-linux-20120127 | NOK | http://autobuild.buildroot.net/results/3233230c7154692c16ec19dd4435426ce30f1b0f | ORPH sh4eb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/0f40a7594320cc7c9a6613c10fe1b30f3558c816 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ac981fa73cf67c2fa5b3a47a29efada9687e4c9f | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ad9a2d27ae3b3658a38edf9f8af49f1385e16c6a | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/79ea197ba3c35c1a8e838bcbaa04e47ac67ee5ec | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/123a943ce6c8ff9bab1f79aca9830c1030d488d5 | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/8065094d6401fceb5154d3054a00a3a401c5b844 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/d4297cc16c65e789dec54cbef974821fda84a08e | ORPH mips64el | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/43adb005f0c041a51ecd41d0de683f9880b93e82 | ORPH mips64 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/366c0b059c0ebec280cae2adaae4fb47279fe641 | ORPH sh4 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/7b060760505f529b3ba827cc314d1f7bf9e98fe3 | powerpc | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/775d5969082d8f3dfa6a5f8ed78691be00cc1485 | aarch64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/7ac6bba222f3170ea19948f1d13acd8c5dcee4e8 | mips | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/56f9d33deac3739447429d04a56e00a2a8192782 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/68efe540a54475c6e8054fa426b23553ecd39022 | armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/fee079dd938b17d13afba5a8b78d3c929a4861fd | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3bd6379618871c770eb1c2d91fbb1f10f8ecb7bc | microblazeel | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/099e5dc008a2505b71ce687459162065a51b590b | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/1ac7961cb00389dc9341d3ab3abfb6b482eb4428 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/feda937dbb1401355662a806299a4ff40c9dc93f | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/fc822694b5eb54c0ed181dd5dc0f93ab2286ac47 | i586 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/682ea68d426a05371cd48b9c5acfda1081d5f0d0 | powerpc64le | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/9e21bcaafe903391e6c0fe6f149e30f158620b9f | microblazeel | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/ab5134e68c1df0ebaca930860d21c1bd15d7e49f | sparc | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/e440b4b221d54a8bb536930927954711be4cffd0 | sh4a | sqlite-3.39.2 | NOK | http://autobuild.buildroot.net/results/999b4284a5a2652f77047aa91fef33afbd6a3325 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/e5278a93c47460cdf6f45d50305e4dd0dd4db65b | arceb | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/8bafd86876e4ea56dd9afbb02fc763261efb0c8c | ORPH aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9ee72675f9b9974d51da06b138b8265f904182b5 | riscv32 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/89424754af09047e3b45c7ae88f5b4568d7be3b7 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0f530490e8f211b6fd570a8468e1213a7098cb78 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5340cc36ad17cb3aa21fbab110e43e71108aa5d6 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6d21146f0a92c07436e1505dafbe906ceac21d5b | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/972ba5d706a38bbc602d1161b5e3d61cb4da0d23 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a4f952b22063de181aef6922ea21abd6d326c644 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4f10d9095eebd707f3b1c22eb9cb5d37dec05667 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/789090a8ef3689185446a3f7f5b74f55ecd9f7ec | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/75484f1334b91791e76a95b810fa2080957f52ea | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e666fbf866bef8251736c4a41f57382b4f52a0ec | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/37b96267ceff449780a17c6d580480b5c28d4151 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd4af665459a2d55dd8fdb9235773c25f8cb976d | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/108dddd015629cf7b03f434bf00fec52813c32d7 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/53161cde33cdc8c40a5d34e0b11724fee9889fd6 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f3de9fd9a53260c88b8a5deec5368692a462a23f | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/96b5581d8558753081d263f5c683bed211482587 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4372edb3be1850f955c84671724b6bb0a8951ef | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/24a65cdfefc71bce29a9dca32668de699489a80b | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8707cb8ebe3621f02bedfdac82565a2b216cc369 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/60c861f7a0afac1f51480812483faa0c7ae9a8b8 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8d76fce85c82407fa44a5c8860e1418ff5b380fc | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8584697c220502f74239094ffdc9912c45b2919c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f7eb722e54447c6a0b839efa29473caf1afed737 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f70f4ca90fe39fa1112348730766f9235fddb34e | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c24f3817cecf6281d537dd042233e37b620f7444 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9d0bf990f58245751113db49e4bfd4ce2cc38655 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a1c9ddf5ca27c6041719218ece5e483391ac7490 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8fe68bd01894e374ed93e743ec44964fd173b23a | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c338c46d376960bb0fb147800d2ef26ca3d28888 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9a0ca76a692ed2e3f3159ccb642e3c846551e69e | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b8d8b4fdb04ea2e5613afb43fce0538009842c69 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7de423c059664041f3db6027db67e766a239f583 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e5cd132db83172d1ab9d7b1cd7935f02a96e343 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/8ef48217ae8dbf486faf38101217bbd171d69425 | microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/f73bc79523fc1a51548719c6697bb43869f7a755 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/676dc2813f2e39572f496e2fb5a547d8a760a5e9 | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/4ce788068aa4a36cbedd6843b7c89abdf42c5d21 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/b1f822fd1ea93b76850d42fc88477ad29bf6ffb4 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/67ea21b7d8e0977d5672e2f62c4875c628e0517f | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/8a81af234493985a84f811319aa3bfa3a6d0b8ad | ORPH mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/be8b917109601f4184cf2787dfc13282f336a174 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/51576c9463deade1debc123c786368c24750f01e | armeb | unknown | NOK | http://autobuild.buildroot.net/results/78ba9c4a4e524857834f463398371ba18fc49ee6 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/cc6e142b99bec1354f2ee4d4cd0a2c93d3ab7d59 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/bdd60233019fb6386f0608f7e893d69514385ae3 | mips | unknown | NOK | http://autobuild.buildroot.net/results/2ccbaa767c965b1a258af8f050075ba945edac83 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/6a4324ee25e235cc33149dd45d1e36113032f08b | sparc64 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/38126e3e76573791af11475b31faadac42d20dbd | ORPH mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/ee5846cd9673efb11a4eca9dfbc281ed648041f8 | ORPH mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/41bbcd61fcbce14cfbb27e530a19faa79a54a05c | ORPH microblazeel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/9098b6348b737248de96a1a5e9703a044b988fc0 | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/724bb26531263a2591f4af43d1039f342d37aaf9 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/85864e8b05551e6b2e7d5bbfa0b422ed2b52dcab | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/1cc77131f8b6f6651c43879e4385cd3ba272e9d8 | x86_64 | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/e295ae11d40974195f8e493414919de93b6f4d8c | powerpc64le | wtfutil-0.41.0 | NOK | http://autobuild.buildroot.net/results/b312a91b70f25d40bf564bc7b20e777cd2f32a58 | mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/c756367c7db809df7f40fa1dda7fa3d557b276c2 | arm | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/cfc35a11c6ea28bc6ad75771f2b9be5c9811c821 | ORPH riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/6ab941b5a5d825ec0e6cb6dd6657d88bbb3563f5 | sh4a | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/d1eded87587f03c2ac591d80b278024b0cf49ca7 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/92d29db54940348a3f818712e3bd4097f6eb5a93 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/425c3364da33835c6c59f4a5efb923866fc4beec | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/aa09c810ff96df5513369af1ae9f98c2ba42b178 | Classification of failures by reason for 2022.02.x -------------------------------------------------- libcamera-1966b9a58436fab51... | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc | libcamera-1966b9a58436fab51... | NOK | http://autobuild.buildroot.net/results/46254b0523fb8ae41462ae7327db844b414479f8 | riscv64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/056577b3a956fe8a9163eb65385ca9bb9116d697 | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-elf2flt-2021.08 | 2 host-rust-1.60.0 | 2 unknown | 2 xenomai-custom | 2 ffmpeg-4.4.2 | 1 host-pahole-73383b3a39afe86... | 1 igd2-for-linux-2.1 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arceb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/cfe9acb744b9ce1a2fd84e85a456c2fc812b7f0e | riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/29605a8e21437df8715330e9a382738f4ba7f355 | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/c096b276884826366f0da923134fa4b7b7138aa9 | ORPH armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9d94bb73102292cdbc6876f344d459c215cdfd27 | aarch64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/2e8a089b99280672ef6f1db7423359a6ccd44472 | sparc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/a77e5477b44d3421c2ba5346fd43b03671640be9 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/89732b432d7743adf158bf7a59b054176a7a70ec | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/90e5b7876c367f4e21671dc2bc1e4ed25b6ed032 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/84fc599197daf3e590bc2cd94eadc98b0ebfd4be | mips | xenomai-custom | NOK | http://autobuild.buildroot.net/results/116f995954cb2b543e73cb03896fa41628cfd7a1 | mips | xenomai-custom | NOK | http://autobuild.buildroot.net/results/ce47c34825decfa41ee63064c93f8e6b6f2f81f4 | Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 dc3dd-7.2.641 | 1 fontconfig-2.13.1 | 1 gerbera-1.10.0 | 1 host-go-1.18.6 | 1 host-pahole-73383b3a39afe86... | 1 ipmitool-1.8.18 | 1 pixman-0.40.0 | 1 vdr-2.6.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/a5f528301ac2d3e452b94a697786ab8c4477b74c | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/92e9a178fdde030f5f94099f8346e9e9ac2ae520 | ORPH aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ea013346ac183afd34f96aa010158c39245cac7d | aarch64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/6df50bf74e8c6442ca49db691b20c9fbe647ec02 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9207c2ed9871e5582e173165536d05e787d51daa | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/321ff3420cb464aecc419fd3d096e7756683e770 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b30d94c1eea3511d35128e460a2d7cdfecb883f | or1k | ipmitool-1.8.18 | NOK | http://autobuild.buildroot.net/results/30efa8281e802f3ebf53b41f6a7344afdfa7b4b3 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/f7ace0397d5f6132a4f63e11387c3db3d89d213a | arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/65c4f5f7149d403272bd91941ed6b4f39ed4b76a | Gitlab CI results for 2022-10-07 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229619 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229644 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229691 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229694 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229698 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229701 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229706 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229709 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229710 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229712 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229713 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229715 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229721 | freescale_imx6sxsabresd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229762 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229782 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229783 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229784 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229785 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229786 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229787 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229788 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229789 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229791 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229803 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229828 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229829 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229837 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229839 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229841 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229843 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229845 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229846 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229862 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229863 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229864 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229865 | octavo_osd32mp1_brk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229866 | octavo_osd32mp1_red | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229867 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229883 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229886 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229887 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229890 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229891 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229893 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229894 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229900 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229903 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229906 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229917 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229959 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229973 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229960 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229961 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229962 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229966 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229965 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229968 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229972 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229970 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229977 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229975 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229978 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229981 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229982 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229983 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229984 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229999 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230005 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230007 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230008 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230009 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230010 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230011 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230012 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230013 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230014 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230015 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230016 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230017 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230018 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230019 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230020 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230021 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230022 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230024 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230025 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230027 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230029 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230030 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230031 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230032 | -- http://autobuild.buildroot.net From james.hilliard1 at gmail.com Sat Oct 8 13:44:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 8 Oct 2022 07:44:14 -0600 Subject: [Buildroot] [PATCH 1/1] package/ocf-linux: fix build with kernels up to version 4.14 Message-ID: <20221008134414.1305025-1-james.hilliard1@gmail.com> Add patches fixing build on kernels up to version 4.14. Depend on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 as builds fail on 4.15 and newer currently. Signed-off-by: James Hilliard --- package/cryptodev/Config.in | 1 + ...gnal.h-include-on-linux-below-4.11.0.patch | 36 +++ ...functions-on-kernels-4.6.0-and-newer.patch | 222 ++++++++++++++++++ ...ssing-crypto_alloc_ablkcipher-symbol.patch | 35 +++ 4 files changed, 294 insertions(+) create mode 100644 package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch create mode 100644 package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch create mode 100644 package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch diff --git a/package/cryptodev/Config.in b/package/cryptodev/Config.in index d1e64498a8..e243cab6f0 100644 --- a/package/cryptodev/Config.in +++ b/package/cryptodev/Config.in @@ -28,6 +28,7 @@ config BR2_PACKAGE_CRYPTODEV_LINUX config BR2_PACKAGE_OCF_LINUX bool "ocf-linux" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 select BR2_PACKAGE_HAS_CRYPTODEV help OCF-Linux is a Linux port of the OpenBSD/FreeBSD Cryptographic diff --git a/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch b/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch new file mode 100644 index 0000000000..2517c19547 --- /dev/null +++ b/package/ocf-linux/0001-Fix-signal.h-include-on-linux-below-4.11.0.patch @@ -0,0 +1,36 @@ +From 9e361206c6f0c8e0f62449cdec3b277f96277cd6 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Fri, 7 Oct 2022 22:25:37 -0400 +Subject: [PATCH] Fix signal.h include on linux below 4.11.0 + +The linux/signal.h header was moved to linux/sched/signal.h as +of linux version 4.11.0. + +As such linux/sched/signal.h is not available on linux below 4.11.0. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718258/] +--- + ocf/crypto.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/ocf/crypto.c b/ocf/crypto.c +index 4e50328..5691b2a 100644 +--- a/ocf/crypto.c ++++ b/ocf/crypto.c +@@ -73,7 +73,11 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp E + #include + #include + #include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,11,0) ++#include ++#else + #include ++#endif + #include + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,4) + #include +-- +2.37.3 + diff --git a/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch b/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch new file mode 100644 index 0000000000..c82a878b21 --- /dev/null +++ b/package/ocf-linux/0002-Fix-crypto_hash-functions-on-kernels-4.6.0-and-newer.patch @@ -0,0 +1,222 @@ +From 7dd718b7b6132c2e8e1e685b03c7b10c0658609e Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Sat, 8 Oct 2022 04:25:00 -0400 +Subject: [PATCH] Fix crypto_hash functions on kernels 4.6.0 and newer + +The legacy crypto_hash interface was removed as of kernel version +4.6.0, adapt this interface to be compatible with the replacement +crypto_shash interface. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718260/] +--- + ocf/cryptosoft.c | 185 +++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 185 insertions(+) + +diff --git a/ocf/cryptosoft.c b/ocf/cryptosoft.c +index caf9c06..d903b6e 100644 +--- a/ocf/cryptosoft.c ++++ b/ocf/cryptosoft.c +@@ -56,6 +56,9 @@ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29) + #include + #endif ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) ++#include ++#endif + + #include + #include +@@ -184,6 +187,188 @@ static struct kmem_cache *swcr_req_cache; + #define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode) + #define plain(X) #X , 0 + #else ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) ++ #define hash_desc shash_desc ++ #define crypto_free_hash crypto_free_shash ++ #define crypto_hash_tfm crypto_shash_tfm ++ #define crypto_alloc_hash crypto_alloc_shash ++ #define crypto_hash_digestsize crypto_shash_digestsize ++ #define crypto_hash_setkey crypto_shash_setkey ++ #define crypto_has_hash crypto_has_ahash ++ #define crypto_hash_cast(X) container_of(X, struct crypto_shash, base) ++ ++struct crypto_hash_walk { ++ char *data; ++ ++ unsigned int offset; ++ unsigned int alignmask; ++ ++ struct page *pg; ++ unsigned int entrylen; ++ ++ unsigned int total; ++ struct scatterlist *sg; ++ ++ unsigned int flags; ++}; ++ ++static int hash_walk_next(struct crypto_hash_walk *walk) ++{ ++ unsigned int alignmask = walk->alignmask; ++ unsigned int offset = walk->offset; ++ unsigned int nbytes = min(walk->entrylen, ++ ((unsigned int)(PAGE_SIZE)) - offset); ++ ++ if (walk->flags & CRYPTO_ALG_ASYNC) ++ walk->data = kmap(walk->pg); ++ else ++ walk->data = kmap_atomic(walk->pg); ++ walk->data += offset; ++ ++ if (offset & alignmask) { ++ unsigned int unaligned = alignmask + 1 - (offset & alignmask); ++ ++ if (nbytes > unaligned) ++ nbytes = unaligned; ++ } ++ ++ walk->entrylen -= nbytes; ++ return nbytes; ++} ++ ++static int hash_walk_new_entry(struct crypto_hash_walk *walk) ++{ ++ struct scatterlist *sg; ++ ++ sg = walk->sg; ++ walk->offset = sg->offset; ++ walk->pg = sg_page(walk->sg) + (walk->offset >> PAGE_SHIFT); ++ walk->offset = offset_in_page(walk->offset); ++ walk->entrylen = sg->length; ++ ++ if (walk->entrylen > walk->total) ++ walk->entrylen = walk->total; ++ walk->total -= walk->entrylen; ++ ++ return hash_walk_next(walk); ++} ++ ++static int crypto_hash_walk_first_compat(struct shash_desc *sdesc, ++ struct crypto_hash_walk *walk, ++ struct scatterlist *sg, unsigned int len) ++{ ++ walk->total = len; ++ ++ if (!walk->total) { ++ walk->entrylen = 0; ++ return 0; ++ } ++ ++ walk->alignmask = crypto_shash_alignmask(sdesc->tfm); ++ walk->sg = sg; ++ walk->flags = sdesc->flags & CRYPTO_TFM_REQ_MASK; ++ ++ return hash_walk_new_entry(walk); ++} ++ ++static inline void crypto_yield(u32 flags) ++{ ++ if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) ++ cond_resched(); ++} ++ ++static int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err) ++{ ++ unsigned int alignmask = walk->alignmask; ++ unsigned int nbytes = walk->entrylen; ++ ++ walk->data -= walk->offset; ++ ++ if (nbytes && walk->offset & alignmask && !err) { ++ walk->offset = ALIGN(walk->offset, alignmask + 1); ++ walk->data += walk->offset; ++ ++ nbytes = min(nbytes, ++ ((unsigned int)(PAGE_SIZE)) - walk->offset); ++ walk->entrylen -= nbytes; ++ ++ return nbytes; ++ } ++ ++ if (walk->flags & CRYPTO_ALG_ASYNC) ++ kunmap(walk->pg); ++ else { ++ kunmap_atomic(walk->data); ++ /* ++ * The may sleep test only makes sense for sync users. ++ * Async users don't need to sleep here anyway. ++ */ ++ crypto_yield(walk->flags); ++ } ++ ++ if (err) ++ return err; ++ ++ if (nbytes) { ++ walk->offset = 0; ++ walk->pg++; ++ return hash_walk_next(walk); ++ } ++ ++ if (!walk->total) ++ return 0; ++ ++ walk->sg = sg_next(walk->sg); ++ ++ return hash_walk_new_entry(walk); ++} ++ ++static int shash_compat_update(struct shash_desc *desc, struct scatterlist *sg, ++ unsigned int len) ++{ ++ struct crypto_hash_walk walk; ++ int nbytes; ++ ++ for (nbytes = crypto_hash_walk_first_compat(desc, &walk, sg, len); ++ nbytes > 0; nbytes = crypto_hash_walk_done(&walk, nbytes)) ++ nbytes = crypto_shash_update(desc, walk.data, nbytes); ++ ++ return nbytes; ++} ++ ++static int crypto_hash_digest(struct shash_desc *desc, struct scatterlist *sg, ++ unsigned int nbytes, u8 *out) ++{ ++ unsigned int offset = sg->offset; ++ int err; ++ ++ if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) { ++ void *data; ++ ++ desc->flags = desc->flags; ++ ++ data = kmap_atomic(sg_page(sg)); ++ err = crypto_shash_digest(desc, data + offset, nbytes, out); ++ kunmap_atomic(data); ++ crypto_yield(desc->flags); ++ goto out; ++ } ++ ++ err = crypto_shash_init(desc); ++ if (err) ++ goto out; ++ ++ err = shash_compat_update(desc, sg, nbytes); ++ if (err) ++ goto out; ++ ++ err = crypto_shash_final(desc, out); ++ ++out: ++ return err; ++} ++ ++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) */ + #define ecb(X) "ecb(" #X ")" , 0 + #define cbc(X) "cbc(" #X ")" , 0 + #define hmac(X) "hmac(" #X ")" , 0 +-- +2.37.3 + diff --git a/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch b/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch new file mode 100644 index 0000000000..7e420f6747 --- /dev/null +++ b/package/ocf-linux/0003-Fix-missing-crypto_alloc_ablkcipher-symbol.patch @@ -0,0 +1,35 @@ +From 3a847686f8a18a50149f2f3d4ed8a661ed507154 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Fri, 7 Oct 2022 22:44:58 -0400 +Subject: [PATCH] Fix missing crypto_alloc_ablkcipher symbol + +The crypto_alloc_ablkcipher symbol was removed as of linux +version 4.8.0. + +Signed-off-by: James Hilliard +[Upstream status: +https://sourceforge.net/p/ocf-linux/mailman/message/37718259/] +--- + ocf/cryptosoft.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/ocf/cryptosoft.c b/ocf/cryptosoft.c +index caf9c06..841d41e 100644 +--- a/ocf/cryptosoft.c ++++ b/ocf/cryptosoft.c +@@ -190,9 +190,11 @@ static struct kmem_cache *swcr_req_cache; + #define plain(X) #X , 0 + #endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ + ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) || LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0) ++#define crypto_alloc_ablkcipher(a,b,c) (NULL) ++#endif + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) + /* no ablkcipher in older kernels */ +-#define crypto_alloc_ablkcipher(a,b,c) (NULL) + #define crypto_ablkcipher_tfm(x) ((struct crypto_tfm *)(x)) + #define crypto_ablkcipher_set_flags(a, b) /* nop */ + #define crypto_ablkcipher_setkey(x, y, z) (-EINVAL) +-- +2.37.3 + -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 8 17:05:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 8 Oct 2022 19:05:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221008170508.62837-1-fontaine.fabrice@gmail.com> cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 8 17:36:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 8 Oct 2022 19:36:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221008173619.76606-1-fontaine.fabrice@gmail.com> cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 3454907bab..d9a7ed1519 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false -- 2.35.1 From peter at korsgaard.com Sat Oct 8 18:40:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 8 Oct 2022 20:40:16 +0200 Subject: [Buildroot] [PATCH] configs/visionfive_defconfig: new defconfig Message-ID: <20221008184016.2327196-1-peter@korsgaard.com> Add a defconfig for the Starfive VisionFive board, a board built around the Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (6.0 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3 and misses some variables, so we provide a uEnv.txt to fix that up, based on what is done in provided Fedora image. Signed-off-by: Peter Korsgaard --- DEVELOPERS | 2 ++ board/visionfive/genimage.cfg | 21 ++++++++++++ .../overlay/boot/extlinux/extlinux.conf | 4 +++ board/visionfive/overlay/boot/uEnv.txt | 15 +++++++++ board/visionfive/readme.txt | 32 +++++++++++++++++++ configs/visionfive_defconfig | 17 ++++++++++ 6 files changed, 91 insertions(+) create mode 100644 board/visionfive/genimage.cfg create mode 100644 board/visionfive/overlay/boot/extlinux/extlinux.conf create mode 100644 board/visionfive/overlay/boot/uEnv.txt create mode 100644 board/visionfive/readme.txt create mode 100644 configs/visionfive_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..bfde353c8a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2310,6 +2310,7 @@ F: board/openblocks/a6/ F: board/orangepi/ F: board/pandaboard/ F: board/roseapplepi/ +F: board/visionfive/ F: boot/shim/ F: boot/sun20i-d1-spl/ F: configs/avenger96_defconfig @@ -2324,6 +2325,7 @@ F: configs/orangepi_r1_defconfig F: configs/pandaboard_defconfig F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig +F: configs/visionfive_defconfig F: package/bats-core/ F: package/docker-compose/ F: package/dump1090/ diff --git a/board/visionfive/genimage.cfg b/board/visionfive/genimage.cfg new file mode 100644 index 0000000000..433387c901 --- /dev/null +++ b/board/visionfive/genimage.cfg @@ -0,0 +1,21 @@ +# Minimal SD card image for the Starfive VisionFive board + +image sdcard.img { + hdimage { + } + + # u-boot is hard coded to look at 3rd partition + partition dummy1 { + size = 512 + } + + partition dummy2 { + size = 512 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + } +} diff --git a/board/visionfive/overlay/boot/extlinux/extlinux.conf b/board/visionfive/overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..44ac6f7944 --- /dev/null +++ b/board/visionfive/overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label linux + kernel /boot/Image + devicetree /boot/jh7100-starfive-visionfive-v1.dtb + append console=ttyS0,115200 root=/dev/mmcblk0p3 diff --git a/board/visionfive/overlay/boot/uEnv.txt b/board/visionfive/overlay/boot/uEnv.txt new file mode 100644 index 0000000000..b831d2d230 --- /dev/null +++ b/board/visionfive/overlay/boot/uEnv.txt @@ -0,0 +1,15 @@ +fdt_high=0xffffffffffffffff +initrd_high=0xffffffffffffffff + +scriptaddr=0x88100000 +script_offset_f=0x1fff000 +script_size_f=0x1000 + +kernel_addr_r=0x84000000 +kernel_comp_addr_r=0x90000000 +kernel_comp_size=0x10000000 + +fdt_addr_r=0x88000000 +ramdisk_addr_r=0x88300000 + +bootcmd=devnum=0; run mmc_boot diff --git a/board/visionfive/readme.txt b/board/visionfive/readme.txt new file mode 100644 index 0000000000..7aefa24167 --- /dev/null +++ b/board/visionfive/readme.txt @@ -0,0 +1,32 @@ +Starfive VisionFive +=================== + +The VisionFive is a low-cost RISC-V 64-bit based platform, powered by a +Starfive JH7100 processor. + +https://doc-en.rvspace.org/Doc_Center/visionfive.html + +How to build +============ + +$ make visionfive_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Preparing the board +=================== + +Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). + +Insert your SD card. + +Power-up the board using an USB-C cable. diff --git a/configs/visionfive_defconfig b/configs/visionfive_defconfig new file mode 100644 index 0000000000..9f5fb03610 --- /dev/null +++ b/configs/visionfive_defconfig @@ -0,0 +1,17 @@ +BR2_riscv=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/visionfive/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/visionfive/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,cfcb617265422c0af0ae5bc9688dceba2d10b27a)/linux-cfcb617265422c0af0ae5bc9688dceba2d10b27a.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="visionfive" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-starfive-visionfive-v1" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.30.2 From fontaine.fabrice at gmail.com Sat Oct 8 22:07:16 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 00:07:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221008220716.150449-1-fontaine.fabrice@gmail.com> cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 00fb7d9842..12e5ca7af4 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.8.0 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 8 22:19:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 00:19:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables Message-ID: <20221008221908.156459-1-fontaine.fabrice@gmail.com> cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 9 06:39:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 09 Oct 2022 06:39:07 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-08 Message-ID: <20221009063914.A2232401FB@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-08 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 11 | 2 | 0 | 13 | 2022.05.x | 14 | 14 | 0 | 28 | 2022.08.x | 14 | 22 | 0 | 36 | master | 157 | 375 | 8 | 540 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 22 sysvinit-2.99 | 17 crun-1.5 | 15 host-sentry-cli-1.59.0 | 15 ocf-linux-20171122 | 14 libarchive-3.6.1 | 12 linux-6.0 | 12 igd2-for-linux-2.1 | 11 autofs-5.1.8 | 9 brltty | 8 host-f2fs-tools-1.15.0 | 8 libglib2-2.72.3 | 8 gensio-2.5.5 | 7 host-binutils-2.38 | 7 btrfs-progs-5.16.2 | 6 dash-0.5.11.5 | 6 gerbera-1.10.0 | 6 host-go-1.19.1 | 6 perl-5.34.1 | 6 batman-adv-2021.4 | 5 dahdi-linux-5c840cf43838e06... | 5 host-gcc-final-11.3.0 | 5 host-pahole-73383b3a39afe86... | 5 linux-pam-1.5.2 | 5 systemd-250.4 | 5 casync-4ad9bcb94bc83ff36cfc... | 4 efivar-38 | 4 elfutils-0.186 | 4 hdparm-9.63 | 4 php-8.1.9 | 4 unknown | 4 fdk-aac-2.0.2 | 3 file-5.41 | 3 gobject-introspection-1.72.0 | 3 host-binutils-2.37 | 3 host-rust-1.64.0 | 3 libgpg-error-1.45 | 3 linux-5.10.145-cip17 | 3 lxc-4.0.12 | 3 openpgm-5-3-128 | 3 python3-3.10.7 | 3 uqmi-0a19b5b77140465c29e2af... | 3 acpid-2.0.33 | 2 azure-iot-sdk-c-LTS_07_2022... | 2 bind-9.16.31 | 2 cryptodev-linux-1.12 | 2 dmalloc-5.6.5 | 2 host-binutils-2.39 | 2 host-gdb-arc-2020.09-releas... | 2 jack2-1.9.20 | 2 libcap-ng-0.8.3 | 2 libglvnd-1.4.0 | 2 mariadb-10.3.36 | 2 moby-buildkit-0.10.0 | 2 open62541-v1.3.3 | 2 s6-portable-utils-2.2.3.2 | 2 tealdeer-1.5.0 | 2 toolchain-external-codescap... | 2 uhd-4.3.0.0 | 2 xenomai-3.0.10 | 2 xfsprogs-5.14.2 | 2 zstd-1.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 4th-3.64.1 | 1 a10disp-0.6.1 | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 augeas-1.12.0 | 1 binutils-arc-2020.09-release | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 containerd-1.6.8 | 1 cppcms-2.0.0-beta2 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /tm... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fwts-22.09.00 | 1 gmp-6.2.1 | 1 host-gcc-initial-11.3.0 | 1 host-gcc-initial-12.2.0 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 ipmitool-1_8_19 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libcamera-ba6435930f08e802c... | 1 libnl-3.6.0 | 1 libnss-3.83 | 1 libostree-2022.5 | 1 libqb-2.0.6 | 1 linux-5.10.145-cip17-rt7 | 1 ltp-testsuite-20220930 | 1 lttng-tools-2.13.2 | 1 make: *** Waiting for unfin... | 1 mesa3d-22.1.6 | 1 netsurf-3.10 | 1 openal-1.22.0 | 1 openblas-0.3.21 | 1 openssh-9.0p1 | 1 package/qt6/qt6base/qt6base... | 1 pv-1.6.20 | 1 python-orjson-3.7.11 | 1 qt-webkit-kiosk-a7720e50f2b... | 1 reaver-1.6.6 | 1 refpolicy-2.20220106 | 1 sconeserver-8d1935919a20133... | 1 uclibc-ng-test-0844445e7358... | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 x264-baee400fa9ced6f5481a72... | 1 xvisor-0.3.1 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 zip-3.0 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- i686 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e23e5ca46df6e138771b37a1c4a46216591d2887 | or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/c0ee998f550f90f0aba21eb7bfdfba60e4461814 | mips64 | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/74e26c8bd78be0ffdec814ee196856897c491326 | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/32c661b62b9a6341b8ae19876344194538237652 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/7a222291acdb03468af1948ddf7294a3389cb5d7 | ORPH mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/78dc0c70811dd9d1badd30a5b1659a18251c201e | ORPH mips64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/ca996ba7af04864b7af28dc94d18afde42d6d054 | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/c160845944ac1da0a8ccaac3930a2286283cf985 | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/e1b9825fc8c833cbc98d7f0080fc42ad9034a183 | ORPH sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9c5bc055ccd5b7cc0f3d6b048995bafda5aefca5 | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a75f5deb6419055d5fa6965ba8e09d63ff883b85 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d2e999d2a8856246f7a9f259535adf6204bab389 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/874340745f087eddb954d37109a3705e208522d7 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/75a7dfd2f2e0914c0d1bd6775b4dddc177a36628 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7653fe6a2619148a71dfe8602eb6de98c77845ec | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8c8d99d2298f85db200879850f8fc7fee540a7bf | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/90412a15eddf12f5ba67f4de7c9f6a8448c5d36c | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6a6da5d33903f6950c12709a12843aae2199eeba | sparc | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/5de776d70191e8cf9ce52614ada430a5507ea51e | riscv64 | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/1633276e5a89982ce89faeae311a60c1f461ab0a | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/bd553420e4eb0dbe7dd3be9c8c6923c45444d0fa | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/7a9ccf310b1b3ab54a2e12bf3a03c7e2a8a1a37b | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/38c0a90821f5fd06b3d6bb42ef46246a1362cf25 | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/054ba624e8805d01acc2ffbc25a35327d81b4a6e | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/7cc67db5fb8c965b6b2f3fc40aaeb9f08a376706 | or1k | bind-9.16.31 | NOK | http://autobuild.buildroot.net/results/b32930f9cefe101af3d51d5590ee2367b5881a1b | ORPH sh4 | bind-9.16.31 | NOK | http://autobuild.buildroot.net/results/80ce5f34cd246f081538bf89705ab606518c4e1b | ORPH arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/dfaa69d7da8385bf36a56e2ac36f13e3d766ebd2 | sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/7aa2b3ba85d48e17e5991dd978e796c176440db0 | aarch64_be | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/ad1e4b8208f70c4385d8f716aa7de631cbd55300 | ORPH mips | brltty | TIM | http://autobuild.buildroot.net/results/ca764fa1cc73d9a3bba7c5900235643fbc125a30 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/003d975fc80c289efe8ade781c1ee8f85c44ff33 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/1c4fba03f14ed9b54da965cb4a9922f33232f277 | arm | brltty | TIM | http://autobuild.buildroot.net/results/e2b091215f3d72e3cecc9f71abb3352ae02e1853 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/be8fdd45c19192c0f5c82dac648fd269300b7184 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/1af2ff23f97f014ca3b5493ba0ac8c29fc7877d2 | sh4eb | brltty | TIM | http://autobuild.buildroot.net/results/d47589e205bcbb6586580cfa5bef3da92b17c2b8 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/9b5d603de2a87e50ece439e8c025446fdd503c9e | aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e74337ed6ed3041edf1801dd5d9e4c98f316e2f6 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f07af17cbaaeae48094ed6664fce57200f37c650 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a99d7ca3388fdbaa3e30ec4e6fa52f0ac2379199 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4a03d07e5935dab19fa16ab217cd9865f5cb9abf | ORPH riscv64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/12552f380fc1369ef2b1b7b1cdd0493674c23913 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1b2dbb0253618356a41e37e8364091992f41d2f0 | ORPH nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5671fb27ab4c7a721a8d1e5043ede0d07ca25aa5 | mipsel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/403994094d7c97a6c70f9f096add534b4b698a54 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4a2782e89ff04a2e9f2b70b1be39ebc9915bc81e | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/31c4cb85403e09dc752c317a35f5ada0acd20c0c | x86_64 | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/05a81b3434d8897a6bf3ca4add6debe3f1ff103d | nios2 | cppcms-2.0.0-beta2 | NOK | http://autobuild.buildroot.net/results/1d8813f7cacc8e60fdea40c45c938f5fec201d40 | ORPH s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b72b1fd2cb02204e2cde26e93418fd7778d2eb8f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/be779b7fc656c8fa4805e8d7583446883527c847 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8b141b090ff140fe94e42cb351cae7efd203ef7b | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0d6a3e4df1a6a368a80033d9628aae2a1b2c7465 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eb0b78e97e974ddc3757d9e04029493d98209e9c | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/995eb512cbe702b98fa384a5aca883856c1375ec | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ddb0b41e9c1642a27afde88f05398840202cc272 | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0e9f2d27cef9ba7807ce7acbd9542897cc6c4229 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d8cf6c3da0082ba39b460ad15a4ce0b5923de186 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c90c0ba228dfdcd3d0014d99a65e3f3697a7230f | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6f0cfc6f2cad45e5c2209344b101c64f8bed7846 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/215370ff44d15de24240bfd6f7c221a5d237ac0c | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d2a1514ba40eaf2a0060f06953aad0de5d608823 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/90818c1a2e5383467154244e769d53ae2efe6607 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d26e1b92a62b8483b8d74bf47c3ffcffd79eaa69 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/ae42dc6623be223555034c58b5d3c315050d5186 | ORPH mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/5f6950fc8d9270cd33f4cac067657dd9b1fcd1c2 | ORPH aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/6dde82ecad14af1e16b590b65ccc8d63f4a507ec | x86_64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/168ffb9fa156176c1148ab5ea32e9a36df35b21b | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/45b7af4dd74708367519e036d27fe04191db0221 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3d7e654510d9f4aa748983696cbb707497ea8edd | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/293ed91950bca48c7a4886c2cf0741194ca97498 | sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/00a9e48244b202a8467410b9cfd031bf0710481c | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/ec3dd9830777f0fea984dea6a43dbe6e6be7d597 | ORPH armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7ad90e1c9b49a07ee1b559f8a543ef022d15e3f6 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7a9eb8cd67f1279a551bfe81c94d50999cbe9758 | ORPH powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8cff86cb9d1ba6f6d0f218f8b0f24ae8da514c14 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7d52cf5c864a9277e069c16b5cc1735861bac171 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/ac41425022d102698cbd5752751c0ca99b796bfd | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/3d252a4f2d155c29333e3564fb086bac6f8b14bf | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/cc3ee99bfdb4d52c028d50c1cb48dc009d6afeba | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/c49d894b109d68e2624074eab8b939fefa3b42ef | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/7c68aac0f18c8c3dfeba382018b05716cab91745 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d1fa1ddad9afec45b5f11b5e9a396c7a31307ec | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f3a17ab2c283989a12a50412dbd91d0f2fa407fc | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/479c752f0b018db22113802011da2751a1322aba | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3d04abae742acc850a67853b3eb3b2eb75ab95ac | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/9260d770544322994c116d90da4c3ff26b6ddbba | ORPH mips64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/262b1826a22127007d5e2c9ef95c84825aca5a6d | aarch64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/0e376b0e1c10ee19ef69860c51ffbafaabbcad6b | mips64el | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/063f57a58dbb1fca941d6e45dda970a714279d88 | mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/42ef768806ce6fdeb795e06cd8d1691b8c2b4a47 | ORPH i686 | file-5.41 | NOK | http://autobuild.buildroot.net/results/519575a4d39e1684f55f554fd9181aabfaf76acc | ORPH i686 | file-5.41 | NOK | http://autobuild.buildroot.net/results/5386cc99d8847763b730365f6e391209338cb669 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/52d42e3733c43d4dff7e9abff9ffd7895fc4f493 | mips64el | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/89393f7af8a56f2488d0183ca886e967757b0c5f | nios2 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/a95913663329c700aec3790b5d6e22455a5bc112 | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/15f2d04344d9e2defcf43f11afcfae5641cc1d03 | powerpc | fs/cramfs/cramfs.mk:46: /tm... | NOK | http://autobuild.buildroot.net/results/a00b5e8c34863ff817e47bb2d3b12bf3ddf5409a | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/9b8950e1eef9b4cf81265f332a4f3a006c9098a6 | sh4aeb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/cdf63cd17bb5701541dd8e87134e7d6919f555db | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/f7a5d0bbf64365a19006c6e7098fac0ebe8408a3 | riscv64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/3079212a710abc635556c6e1eb95c2dddf94d4ff | s390x | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/693a1e362c2bfc0d2d7be9afe36a6aa20924f6f7 | mipsel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/34a60b786f449e3baaa45812abbfdac2e76acb12 | nios2 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/cde4c9414d236bc77be4aed50c2dc93116d0d1b9 | i686 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/bfa53d7e4338985c0d0df4b48c73fbd4a108b323 | mipsel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1463bef671f7494e6bf528a4cade9117179bef5e | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1621a08d0652ee625e73d5da7f4dc18034df3a3c | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/786694e5eb5bfb7302ec2d70610981896327054c | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8d2844704cd4eebb4add21bcccb14207a360b3bf | armeb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/46d241cdc0157a6e2da65651511af49e6b079a8a | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/520df7caabc33b0da1ee7502b1e36064c024735b | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/37d3122b9cc11ac1cf5583bd0f6d26713c2ab376 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6674651f5b64c7dacb2957a8f533dc2104466f42 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5c0ec8e3e6a04b4facc3c2b3e44c643ca8724e8d | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fcb45e1eaa5d28c3747d3d6f76b5e6b74e94458d | s390x | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/560fcbae71a1aebc6e5faca983940be06d66c36a | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ffb5b1edaba146fcffe79fa569d0c6d8f488d8a7 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cfc8f7dcd68453a9950179c50d4dcfe732694167 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/879da7ff4415dd73650886a8daa0b9cbf19fec77 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c233f71ba54c822a5281cbf293acc5322ad9871 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0925f480614c9a6f6e35c29de501ff2b289da6dd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9b31f24aa37d180a135ae34517eb6e70873617d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edc4de2e9b99f90f1f6003763f48061d36ff8fd1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f0bd38866a778488094e9550142392fe0ea8110 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/35f6e0d412daf86e09a3abd987e7c570d9c2c23f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa7e13634a39b9f6566ec55b932b78e1fa03955b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20a751f0d703b46559d0f90e5af9fe1e654be345 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d0be152938da471baa69be765511a0c41f65412 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b269f466e2f04b540407eed374bb1d1532cb941 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/126f769cd3e1a051da1ace3da1f3230bbf546f71 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3101f0388f91d0044efaced6561f9b481066503 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7dcef902c4b6643c2dec0e82bb144dbd19494203 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a26cc349784f9d16be1276a25b86d12709aacc5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/24a5e23ed96089f0b5d69d429ad06e41aec0255b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9215b4e8ec73a438f4f0ec8dd38ef99fa2a09455 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0646d1107fe54948150fb9e8cf865801f6119eb | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/755baae6ad0775e7b139e667d2da391c902d3da8 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/acc608ee44da76caf6245af816dcd9d3d6ca025c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5655446e291a494894395ff9f51d2d6a77cc93e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f3ad2defd7e58ccaa73c0ae24d0bd1de15a4324 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/8def39661014e2033955516e3b44937719b8a63c | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6f727c9297ad73be8e22fbaab5151b3d3ba84b53 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/34690257caccca1ca15a8b1615a29d9ee3c48c9f | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e3e095af0ac42e7967e2f89e66d2727028109246 | ORPH mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/e057d923762adcbed9c7c78eeb9f9f77f0039b7c | aarch64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/d231720e18fce19f11c4495e57efcaad9f72c57e | sh4a | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/83a3009c44caee5dc2ea6883b59ace5f3479c0e7 | mipsel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/babac8dd6ff964fced47c61ba171854c8c07f303 | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/706419004fc523b36f4f3b8fb2b1f32316ce0d0d | mips64el | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7527cd23b9593c7972d8148ccf526b6940532c87 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/2dae864520979ccca36ff89a6e840c6906fff26b | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/951e507b9e99cc07a86dcea581a90e12315f1ee5 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c8cbd2b75b83a5fe034206f6e8f88a38fad8e3d3 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7601282748aa16d7e1460bab0e75d3b5daf254be | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/80fece1c824848564f53f0a5616fb817e0fdc76a | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a59faef9ef3b2eac4da899721e0fe9ff3a98c35c | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/42844dd8c8c47252258c921406584910d59b2d41 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/90c5886858d8fdc52fa5b614db6e38363d8f48d2 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/620488080f70762cf46453d54562a1c53693d0f6 | mips | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b366a4e7676312a87af93f4be708c3ca16a3f1d0 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/29e2ce7c047fc0708803460234e38e4b96ee4dd0 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2718a3a1e18102e02601479ce4f2e7d260bff9a1 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/647e9c02d16e3c9b8c394f0151f6b99ec20e0f92 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/95934c04328b8fab54b928e93d1aad34b87dd940 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2ce864a5ab6822efca343a258df487e94702aef5 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0b1a920afbd5eb3eace292025d1580d6b9df497b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e8a9d4ddf5402e764862484c5d63737eab808b8a | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e8cdf4fbcefe04c20a751b218ed920ff620d9a99 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/21e4a24c0b9881c1f20708758292035b88e5ac66 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/204f251e742af44646bb24675e91b83c78c05923 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/12642723597fe941b620207c7f408001154cb21c | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6adc7908cebec0ef1ddaa723fd0d58b77eb097cf | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/668781586c9f9f41bae0c41f9464565e3a36f168 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b8da13212a1e5927594d0b09b3264b0752a7f605 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/7a51bac17002224b938950c512482131977b5ba6 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/be0ef1d40df290707589ab3bd8daf7fa125bf207 | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/01a42d8c29ac410f2231f5fc7c19610e7a804407 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/89558cb33f271205d38fc2393f9cb605d2a352bf | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2f7e161c6bbe1f546a1e5b537ee788d62dc72937 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/66754f41d9aca515135b9826da13e4f675090a33 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0784e2a2591489bcfa9d07dd720849f698f4530e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7b0f19a0170ab9121da283b82f459322fea3ad1f | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f7530dd65d648b06887c8d73d5f0530ad0f6ea10 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/13a476ac0fd9f596b413078a7fec58cd62417649 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/30bdd85584dd7b8aa78efcd20f84a750e69d563c | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2d2d29af6dda8e7b39b4bbbb248c322052913e58 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ddfc9627d2ba7b1a3f443e9eab528712fd57021d | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5c8cb78d9c18950602c6cba027068cb133a74032 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7962b875db59759c340bba87b01b0393fd62e239 | mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/752b0ee01cf1a0c0a9d5b11b8b11e4d242fa5139 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c0b215e6f63b737db945e2cbbb36aca2ce25727a | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b50f45d39eddbd214cc6fca247dd96ab94a6bd4f | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9fdd553007bdc5d56b307a1b7b59475a6111d4e6 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/604f364a677c3187f7da96ddb3317462017b1f92 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ee814e4022d2a690dd2409f81facca6e953e649c | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b7e88ada0e5020de5899a0ebe5f3b25b9db90359 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/65fae07b6462d540a32bb06de33c06b20d597d1e | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d599204c7fd76eda4f8ba27bda2b3060f922c132 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/10f2789af75c0db28d746612ac4c2b3a26b644ff | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/580671ef1d37ebe67cdd16f4621a6b9523ec46ef | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2ba733cef6ec0db7fd8e034fa1a63089aba232d1 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c3a11c20bb0f99b258bdbaa9c150233d796fc353 | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f5379137626cd36c67e37a26b943b81d3856f557 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c8a225cb127031e66a171ed9cf96e64aa50d16bb | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cb55c6095c86a568d595a41a89f61b814f319255 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e28a7b5887fec9e56626063f3d0f9dbeedd75c9d | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fa4faf7e36a461336e2631a4da2933617afe5102 | ORPH or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/66d2a87fb90404b15de9320f2033c50d4e1a9ec4 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f1d488235f761013a35192b61606a18edcd0702e | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/49797c6a697167a15e3fb1922665e7ea804d89a6 | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cb54fd3ac6d735cf1404b75b4cf0b522cefacdc0 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3fb8f52f9ddf371e11424e3b1bf326ae2c453faf | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d10ee0f1f773738ebc824d2c723a90b5e29542ef | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/563252ffffaf725c104a341d99f30744e91d6d2e | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/671deffe99e040d0edc13e825952dfc42616ec2b | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b023510f9798eb0d881b18015e6ff3b5f2557faa | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0b5e5dc99bbbfc3f51cdfbe190dddc1815b96b2b | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/bec293cbe86cc1306410fe997e838767bcb41c9a | sparc64 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/00cdd54866b159f84f5d194fd8eb67b4364df003 | x86_64 | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/a1a6c0667f58b3113ecda380a4a08ba845afc99b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/3cf43c95b7a3db4295fd0397d18a4c4ab712bce4 | or1k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/1653a03d0c0ae355c1b6f7fc9ad36c552c656576 | i686 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/8fbfca82c891be9b20a19d90f501a86b8b45396d | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b73b2eb863788bda786620a3d9f004689b35604 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4fc45dbdde9bb7e09b64a19f1f33a5336f937a22 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5becd597c8f7f60afd885c7fbf86aa8e7fcd936f | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f37c54d45d51771452e22d985333bb2ef76a86a6 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/68e8b1d9a38aecaace9b8e17c33cd3c66ca7f62f | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/071bc880c1c80257ebfcb499f24168b6a7b1b68d | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/871d20ea5db393d9d7450e9f797f851e628d2c73 | microblazeel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/838abe3ad9122d33189900992ede400234d1904e | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/beb1403f5dd5d84eb9686232629fb2a6ca275bfe | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/28cda709008b394637cf1180c4ea3464d3312252 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5fdd487b1341e1cf9badfa856622985a21e42988 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/419b8d70fa370fc1c8128292aadb71bb800a8ac1 | or1k | libcamera-ba6435930f08e802c... | NOK | http://autobuild.buildroot.net/results/cd922dcced0d3a4076a42a0828fab2ca4c962f2c | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/6165ba057ee526446d91808451d5350a804390ad | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a6a2532e1c12d31a29a61e46064d8fc2fb524c92 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0271d41b953a43e27138a377f5da9c1cb19f99c5 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ff4dbe90965e060faff01863817b672e17a4fe81 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/63dd1fc2c99b172bc4b53b0036008802cb1f3c70 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4574ca78d4fe1f104e737489032ed023a541a243 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e5125e6bff5e9704dfac3b85fc1c05405db0ac19 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/66e93ade6d81c83ee2acffc96ce1232fd768eaeb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8ce241c5068fa23add9e48715cfd4fe38fd5b804 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ef5ccc5365de23ff33ccdf6ac392aebdaa4c42c9 | microblaze | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/4653dee2da4888a070557fa62b9b1a2cd88c0864 | ORPH mips | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/b2fdcf564427c118cb2b36d20fd4543c2f4796e0 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/e5b98df0f5de23117183c5842308e6dfd4b4ba9d | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/7dc9b9903b51cf4347078dac05dce3e59468958d | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/73e00c0872339d37fedd40012236f7080c85b81c | ORPH powerpc64le | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/aefc4fbd2676575d22b5f4209f89c4812eb3c45f | ORPH aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/db78751b5e6b863fde6eb7536db830a31510c18a | aarch64 | libostree-2022.5 | NOK | http://autobuild.buildroot.net/results/3cf19f5de18723c6726aa0b328196c1b4ef22bfb | powerpc | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/ae20eb328682ebe3826005254db280b266a4f678 | sh4a | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a2b733c7e23ec2000eeda802394566e03e4b74b0 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/f39e68ab56b17126caef7c0dabaca61488dfd1e6 | ORPH sh4a | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/ef7696512922e0aa1a9349772b01d1bb6b755817 | ORPH xtensa | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/a8da4f32b46e1ddf630cea9502760e0e8a3ecd68 | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/8ef3b61b94ed4fa150890c3db892abdbb9022a4a | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e7787cb0464317d7e99e505ac0622b7b36ede1de | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/03b62346e54a53dadd27c6e111ec837d3276aa25 | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/f1f2f877e7e6dfa1c54aef68ed85d19c722578fb | ORPH aarch64_be | linux-6.0 | NOK | http://autobuild.buildroot.net/results/8fa9a7ccbd248d289aa8036d681b369601e3d9e1 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/b4121c433e9dd87265730ed7006cfa3bf485ca78 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/126c90d9aa5cc8fdd007300ec14a285ae326296c | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/61caa406d79b1267ab820456fc8b1887c828a528 | ORPH powerpc64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/eb9da90f90653474fe37ae616e88a634fddf8d36 | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bafaf328ab7b9263f4416d0a95e59463f87fd877 | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/eba3ec503148453df36bc710d28b1037d7d7ad67 | ORPH i686 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/1a2f834a16ef86737a06c3f2d1963430470cdec5 | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/48a3daad4127c11d94c9055824b729f4d708c140 | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b20d5d1ec185dc319c4cf1fc49d4a456719e897d | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/829beb60761c6efe0aab3f10eb73dc2606e32cc6 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/382ea650da1892a3a20fb03fd088d993b99c8d04 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/f9da62dbdbd372d5bac9a4e56926dd44e68ca9a1 | ORPH powerpc64le | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/a52385af8ecacd58b6c22b1363f3a63f89dba2e1 | i686 | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/ca9b2d3742c57fcb15d44aaf692a5cf541f317b8 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/1ca1c1c15284aaf3acdb7a7e7f0aa85133941703 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/16ecce59651108dd94d9a833d66aa69fc2dc38c6 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/29482c15cb84457a8aa484a20a0b775cd927f6f0 | xtensa | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/6c4a7f238983acb8560e016e421d2d4cd446be3e | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/1ea63fb2c0ede133788993cd05b3fd8d1b3fcfba | ORPH or1k | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/5571ec37446327a5b6afe92c344d7d34d0324476 | ORPH x86_64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/8f16ab8470f26ba432149f19ad197ab6be286edc | x86_64 | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/8ced3c5c51cdba810ff37be3a0f09921a65bc38b | x86_64 | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/6c451033c073d8808b8d5e0fc2eccb90e82e34c5 | x86_64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/bb1fa6bdf601c5e4f6b306111fb6ab14723d650f | mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ce6eb36649de8f7bff24c7ba0b570529eff1cd36 | ORPH mips | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/29306aa20d9ca22e7966f9ebb2b63835bf759d7a | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5cb2c974072a769e6df005f6435edb2f303c9c6d | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/817ea86be0c06c89db0343ed45b26794c6232da8 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/be07dd476768c084cfb27fb944d2de08aa11cdb7 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/8da701fd2d09032b78415f456493465ee40707c0 | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f6b6740644a76df5665cce475792f7eaa612e996 | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ca1975ce45e2bc9e6cfae0cf496a838142a453a2 | ORPH riscv64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/875c37817087095f256a3104d232ec75f5ac8b21 | ORPH microblaze | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/aa020ba74308ffde8c5834cbaa9cff5323fc5320 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/202cfd8d7ac8804e6ec48ec1f476b36ef307b6bf | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f95063402c99e45522cb1c9a09bd222e9ca26843 | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/d3ff2e23c31fd41db5ba8afabb5748fff7681022 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5cb99a0ec09a9f4627ea302877e903482fae3e5f | ORPH xtensa | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/43d42dfceed61a2b0e842edaa1d706cb9f028683 | ORPH i686 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/4ca9d0317e514fc9c19783aa83ce0226857fa8fd | ORPH mips64el | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/8b12d08cd861c7aed6cbd3f31db111c3bd7be7c4 | i686 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/716ec921f5f18666bbc32f98a5f4acb969719331 | ORPH or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/0db43bd4a87d17d3a667366b6e7d044ad24c08c7 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/4002e5a44e36cdd58c626b5b6357a51e2faf2e4b | riscv32 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/c480a7c05a406938f88071078a7aba18691fc235 | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/0384d9a5dc0e00542503d00b0d23178f56d108c4 | ORPH aarch64 | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/9d28efe7aac32c5d32d5192d583214ecf34b7427 | mipsel | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/a54df4fe4b2e907f5b9561f98823e0e5930d84b9 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4f6764593c25e53f7e4c72849109d08acebf58b3 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/40725c9fe68ecb24699100a6127f3acf7c4e644f | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1fc839853e51b027b33ed4ff5fb0b4e86ea1e5c1 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/aa9cbd74b81607197eedd90e3d5c7dcbe2403d7a | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/48b7893c52301f1a8aef87954dd5e7ec23a24994 | sh4eb | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/523d0f63870085bc8e217cfe788a2d578bd4c7f5 | armeb | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/88a292911f5ec8b47a5f24a6aebc222fa2cfc685 | microblaze | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/0313a142494ff4a4d667738cac74e3aa39da9d0f | microblaze | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/a69a8f1399d2c57a5dd5b95ba23f5ff7bf191a6d | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/442cc0d85b29702886640c04d6aee788a0a1effe | ORPH mips | python-orjson-3.7.11 | NOK | http://autobuild.buildroot.net/results/ce7a99fb0df7cb24abb3a6279c4625ca7e65b322 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/286ca5cabfa21b97366e6111f5ecdb7b63188f9c | arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/b2f58d1302e78214f4b23b4169a039707b33a838 | x86_64 | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/a2471302bea28fe6992f3aba3bb699ef2dc3a3bc | aarch64 | qt-webkit-kiosk-a7720e50f2b... | NOK | http://autobuild.buildroot.net/results/121f373e37fc17965d990b2528f7830a0c2a025f | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/46ddb3ccbbb0260cd037354c47fd8d8c58538761 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/a9568b2fb4d7c505265c89f620e085031e01c005 | microblazeel | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/b78a882836abf03e9c2126bf81a23be72587a425 | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/5121a09736aa03552f55572ed9aef9b0912b3963 | powerpc | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/2120f1d0686ccb4f2b7a7d8f3963850b2c289ecb | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3da4424ee43a0d7d12276bcbef1dbff21ea184d8 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/130f3a59c51be1be23b9c4aef17bce7f4bdf34ec | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/528cf652e41a404c1f6f2c2be1ed2438559af894 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c6a6a68de7082c71f0edf409b1044352725d9dea | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3ce9a1ca79d909e936e06030e0c0e1366e0bdc6b | mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4f3cd17142407a4bc5551b06b554dd097a3eff2e | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/99cd421a27fec411ef2b711b3e8d5c7dd6676b94 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3a768ebaee21813b5053a1acc51f01b5d3a75299 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2ca8b593911eb2e00d9f09e65fdf7197cdc3e841 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f478436b5f21fae8ae34aa49130530f57dca8887 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7193c52f601f78ecbfaed07ef0790561d33784e1 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4a08b2d20b862fc30e447a29241ccbcd0d9b06f0 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f85e12194f3037187ff9693cdf5210ee25613136 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6f8f5372d210b60ead14957e63a7ef76ecaa0791 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f4d17e74f8673fe4814116bc3c03af81037775dd | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2a6d33853dcaf2917f27de787c273ce43de90e1 | ORPH i586 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f481d24bfb53eb9c8c711086da3c3ac088b0a11f | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2749b6b5434585c3d4dc331b40539de6d3d51db7 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3efc20d887a20fc22cd2cb6ee468befdfa0639a8 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7193020c9a5a0a90bc241b0c319129425beb9429 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/66da7486191350cdc13b4e468949a91dd99cf6b4 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0a9cdc352c67e1b39636b3e74359f07bcaafd9cf | ORPH powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/e7087b49dd87e40472fed60beb9b2a0777b8a062 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/23dde1d453415f20531a436b49f2eba4df12cd26 | mips64el | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/bf7676888cbe759ed0eefb71d7a2d0c90a39e66b | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/60b239b7d997999b9fb1c9cc328c7d9381348f25 | ORPH armeb | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/2e630956b2438c9934e8982d1558959290b983fa | microblazeel | uhd-4.3.0.0 | NOK | http://autobuild.buildroot.net/results/c1ea9f387b5a450ac96e548be3545da6d58c0b00 | aarch64 | uhd-4.3.0.0 | NOK | http://autobuild.buildroot.net/results/c4d3b1296efe641fbbc78632d189583b0294131f | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/149d835dc3e4f1e9015567130ffb7bf4eeec6d49 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/8acdfa2abc02cbf10a0b439eabd734c38b50e52d | arceb | unknown | NOK | http://autobuild.buildroot.net/results/054cfda089e7819adeb3fe963ce68641d90b08a0 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/cbd4ca9376d21503e27869ee41b518c3424dc0da | m68k | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/2fe1b4ee2f99154f256d1d56b552016f7b700d3d | ORPH s390x | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/44f32435193a59ae4cd93ec90c26b8204af0bb51 | ORPH i686 | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/399ca957c6309052cc8a06822601880ca1edd0a0 | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/dd9ef14b4da177bbbcc7cf0423f17fdf321e5f05 | ORPH sh4aeb | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/2a5521b2f957084266789d51803a9559c6382de9 | i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/42b7a13ec931fcd5dd9c35146a5ce2f2873a35e8 | powerpc64le | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/95c482f450d713a73d9ca434203dc71d8e7a5d3b | mips | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/79667bbe11c4018e09823f96f263c9bdecf7ee70 | mipsel | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/f9301581fb2bd475ee7facc5b357cbf4df6008e3 | ORPH arm | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/0b344cce93d5f708b1782409d08e8771828aab91 | ORPH x86_64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/53104caff2622f66911dae8734e6aad0b8cdb100 | i686 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/96bb9fbf75aaf2b72131c581b5389c39dd55f329 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/a9e1fde0a29741ea84059ef8deea4d671ba1ae6d | arm | zip-3.0 | NOK | http://autobuild.buildroot.net/results/766713ddd4e6e27e245d19d3398a84216f276f50 | microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/28a68af78889b14f7d6463886898099acef8dda0 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/32025bbdef9f2e0124f0a73b9ab52f7879a8dd4b | Classification of failures by reason for 2022.02.x -------------------------------------------------- host-delve-1.8.0 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/1a9d2535d0bb0c932f9605aff14012b5c8962527 | s390x | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/ec3f64fafa8808ab2298b0a3b0f69f2a5cfdcdab | ORPH Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 host-rust-1.60.0 | 2 protobuf-3.20.1 | 2 dahdi-linux-5c840cf43838e06... | 1 docker-cli-20.10.18 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 mongodb-4.2.18 | 1 tbb-2021.5.0 | 1 xenomai | 1 zlib-ng-2.0.6 | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/109796d8d99b1a862505dc3ee1362702e26b1d59 | i686 | docker-cli-20.10.18 | NOK | http://autobuild.buildroot.net/results/cb812916f70eecf307227bc7901f54d6fa521027 | aarch64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/2ce2bd4c0bcdaee6a85264ed204e9a99d2f2a4bc | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/59e71f37e74f06184ec31f9de54f757e1ce929a3 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/9c84de01c1335153155c279fcb5d57edaf873674 | s390x | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/15618ca8c9b54941fc59617b69900cf47972997d | powerpc64 | host-rust-1.60.0 | NOK | http://autobuild.buildroot.net/results/d856c74814c5e406c236bfb2658c400eb777df92 | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7d4f97e4628683f531e1598c6a57a53d1b8ff76d | x86_64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/9448e763f03046722eb00be296983b9343be8b91 | m68k | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/652d137b67b3e42fc609bdc88e1d4c6c57c241ab | arc | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/73bf83f30d9e4a4e6fa982ed072b42b7895937b8 | arm | tbb-2021.5.0 | NOK | http://autobuild.buildroot.net/results/82476601631d24764d4ac677c5f6096d8436a491 | microblazeel | xenomai | NOK | http://autobuild.buildroot.net/results/da2291dc662fd07f66930ff6a33ee6c03c41951b | aarch64 | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/9c68008d4003d2aaf206377e11d564e449ea26ce | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- exempi-2.6.1 | 2 gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 2 boost-1.79.0 | 1 docker-proxy-f6ccccb1c082a4... | 1 erlang-22.3.4.22 | 1 frr-8.2.2 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libdeflate-1.12 | 1 linux-5.17.15 | 1 nodejs-16.16.0 | 1 uclibc-1.0.42 | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 volk-2.5.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | boost-1.79.0 | NOK | http://autobuild.buildroot.net/results/5cd8c27853676dba1e4eb109cc2b5a03f03b7319 | x86_64 | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/68b79aa6a38289e048ae5677899c70e511ca6701 | x86_64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/6e650449c5603b1293be398c4342f464fc6121d6 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/963468cf6b2b6af086320787961caff9d42249be | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/fbd43e710a578cc886f71aaf111a2bcc241d317b | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/359295b21db137ea30f92dbd2b199f6e8f94e13e | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b48bbf3b2a73973c578db823e860dc8aa1329452 | i686 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c9d2961ff246be10b69ab8f4d5e1d168977c4504 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/0bc40328f4c41f3893d5e8c854e3970f669c356a | microblaze | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/69a6eb1efe0c8a0e3fe95901ff9f27f1c7c69e13 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/01a254a0f08002a48435f0ff71521220df1dda50 | i586 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/0f9bb6ca7b617e541ef2c0924d56230c76ac0047 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fe32b8535e47c25fa5d9e5d2f67e006ee2f28b49 | ORPH aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9f08153991882e2608df17ac5ecc58ae11ada52b | aarch64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/572ee10454eda32f979256cb11fc3856fd204ec4 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/06d63a53d80c7deb7007b7ea3faa0f42c0d47f47 | sh4 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/efb88e0886a6eda3ca93c9832ff0faf745fb3101 | ORPH aarch64 | nodejs-16.16.0 | NOK | http://autobuild.buildroot.net/results/00d97961a158bcd213e45ddb5f0206ba6e01d8ae | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/ad615c522d463ea8da3e3c2da386cd468899de2c | mips | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/cc86dfa5f04872c82e95f850b80cc32cc5eab69a | ORPH nios2 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/636f084d3016e01f51eaea8800351997ab602ba8 | powerpc | volk-2.5.1 | NOK | http://autobuild.buildroot.net/results/bd72a5e888fbc30c172b1a06137ec43920d78ea4 | -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Sun Oct 9 08:41:23 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Sun, 9 Oct 2022 10:41:23 +0200 Subject: [Buildroot] [PATCH] package/libostree: bump to version 2022.6 Message-ID: <20221009084123.231395-1-marcus.folkesson@gmail.com> Signed-off-by: Marcus Folkesson --- package/libostree/libostree.hash | 2 +- package/libostree/libostree.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libostree/libostree.hash b/package/libostree/libostree.hash index 6839d5439c..582af4b7b9 100644 --- a/package/libostree/libostree.hash +++ b/package/libostree/libostree.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 914c4d993bc111d7dd30ae9721b6ffe8ab56eb1fd6e81b097b09f400cc1b053f libostree-2022.5.tar.xz +sha256 835ef47d9a0b35a10c77ffd7f0fbd2e2b87f7cccb588da27442a05ff71ffad8c libostree-2022.6.tar.xz sha256 b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c COPYING diff --git a/package/libostree/libostree.mk b/package/libostree/libostree.mk index e0c955bc9a..e99da9d2cb 100644 --- a/package/libostree/libostree.mk +++ b/package/libostree/libostree.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSTREE_VERSION = 2022.5 +LIBOSTREE_VERSION = 2022.6 LIBOSTREE_SOURCE = libostree-$(LIBOSTREE_VERSION).tar.xz LIBOSTREE_SITE = https://github.com/ostreedev/ostree/releases/download/v$(LIBOSTREE_VERSION) -- 2.37.1 From guillaume.bressaix at gmail.com Sun Oct 9 09:29:12 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 9 Oct 2022 11:29:12 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: <20221006221340.45c07636@x230_1.trabucayre.com> References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> <20221006221340.45c07636@x230_1.trabucayre.com> Message-ID: Hello guys, sorry for the delayed answer, no access to personal emails for a bit > I am sorry, but this still doesn't make any sense, and will in fact > cause build failures. A package cannot have a target package in its > _DEPENDENCIES variable without selecting it. I agree with Thomas. Basically "gnuradio" is now becoming similar to "scipy" which already exists. And we do select "python-pybind" when enabling "scipy". > If python-pybind is needed at build time on the host, then > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > needs to be done in Config.in. I disagree with Thomas on this and agree with the proposal. But that's only due to the weird nature of pybind. The current setup/description of pybind is a Header only package, it is not a host-package but the only difference *to me*, is where the headers are installed to. I scrolled the pybind emails history. The only justification for this, *to me*, is Yann's: "As I explained in my previous review, headers are supposed to be in $(STAGING_DIR)/usr/include/pybind11/. That's at least where they are in Debian-based distributions;" So pybind got reworked to match those expectations regarding how to properly manage a header only library. For us, this did not help because the pybind setup script is tedious. But we got it to work. On the other hand, there are plenty of header only packages existing in BR so we had examples to rely on. For information, "gnuradio" and "scipy" are now the only two packages relying on "pybind". But two other candidates would be "kmsxx" and "zeek"; my understanding is, these two currently have a build context that embeds a pybind itself. Maybe in a not so far future, they would get incremented to rely on the pybind we provide Guillaume W. Bres Software engineer Le jeu. 6 oct. 2022 ? 22:13, Gwenhael Goavec-Merou a ?crit : > Hello, > On Thu, 6 Oct 2022 21:50:57 +0200 > Thomas Petazzoni wrote: > > > Hello, > > > > On Thu, 6 Oct 2022 10:27:57 +0200 > > Gwenhael Goavec-Merou wrote: > > > > > - Since gnuradio 3.10 swig was replaced by pybind. Now python > libraries, > > > bindings and python wrappers are produces using pybind: this why > > > python-pybind is a buildtime dependency. This one is a stagging only > > > package (nothing installed into target directory -> no select > > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but GNURADIO_DEPENDENCIES > is > > > updated with python-pybind). > > > > I am sorry, but this still doesn't make any sense, and will in fact > > cause build failures. A package cannot have a target package in its > > _DEPENDENCIES variable without selecting it. > > > > If python-pybind is needed at build time on the host, then > > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > > needs to be done in Config.in. > > > > If python-pybind is needed on the target, then two options: > > > > (1) It's needed only at runtime => it should be selected in Config.in. > > > > (2) It's needed at build-time => it should be selected in Config.in > > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd > > like to see a serious justification, because it is really uncommon to > > have target Python packages be build-time dependencies. > > > I'm totally agree: gnuradio needs host-python-pybind. > In fact pybind package is not really clear to me: > - there is no host-python-pybind > - python-pybind is used to populate staging (PYTHON_PYBIND_INSTALL_STAGING > = > YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET > = NO) > > If I remember well (but unable to find thread) one of previous bump has > required a long discussion with as result this status: maybe guillaume (in > CC) > could help to clarify situation. > > Best regards, > > > > Thomas > > -- > > Thomas Petazzoni, co-owner and CEO, Bootlin > > Embedded Linux and Kernel engineering and training > > https://bootlin.com > Regards, > > Gwenhael > -------------- next part -------------- An HTML attachment was scrubbed... URL: From guillaume.bressaix at gmail.com Sun Oct 9 09:37:16 2022 From: guillaume.bressaix at gmail.com (Guillaume Bres) Date: Sun, 9 Oct 2022 11:37:16 +0200 Subject: [Buildroot] [PATCH v4] package/gnuradio: bump version to 3.10.4.0 In-Reply-To: References: <1665044877-79114-1-git-send-email-gwenj@trabucayre.com> <20221006215057.49eec773@windsurf> <20221006221340.45c07636@x230_1.trabucayre.com> Message-ID: it makes sense when you think about the header only case. When a package like gnuradio or scipy (which is being cross-compiled) is trying to locate the headers it needs, the search pool is the sysroot naturally. Which only contains cross-compiled binaries. So basically, a header only package does not produce binaries but readable things. We "cross-compile" them (mostly producing nothing), but the install step points to the correction destination: the sysroot search pool. Guillaume W. Bres Software engineer Le dim. 9 oct. 2022 ? 11:29, Guillaume Bres a ?crit : > Hello guys, > > sorry for the delayed answer, no access to personal emails for a bit > > > I am sorry, but this still doesn't make any sense, and will in fact > > cause build failures. A package cannot have a target package in its > > _DEPENDENCIES variable without selecting it. > I agree with Thomas. Basically "gnuradio" is now becoming similar to > "scipy" which already exists. > And we do select "python-pybind" when enabling "scipy". > > > If python-pybind is needed at build time on the host, then > > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing > > needs to be done in Config.in. > I disagree with Thomas on this and agree with the proposal. But that's > only due to the weird nature of pybind. > The current setup/description of pybind is a Header only package, it is > not a host-package but the only difference *to me*, is where the headers > are installed to. > I scrolled the pybind emails history. The only justification for this, *to > me*, is Yann's: > "As I explained in my previous review, headers are supposed to be in > $(STAGING_DIR)/usr/include/pybind11/. That's at least where they are in > Debian-based distributions;" > > So pybind got reworked to match those expectations regarding how to > properly manage a header only library. > For us, this did not help because the pybind setup script is tedious. But > we got it to work. > On the other hand, there are plenty of header only packages existing in BR > so we had examples to rely on. > > For information, "gnuradio" and "scipy" are now the only two packages > relying on "pybind". > But two other candidates would be "kmsxx" and "zeek"; my understanding is, > these two currently have a build context that embeds a pybind itself. > Maybe in a not so far future, they would get incremented to rely on the > pybind we provide > > > Guillaume W. Bres > Software engineer > > > > Le jeu. 6 oct. 2022 ? 22:13, Gwenhael Goavec-Merou > a ?crit : > >> Hello, >> On Thu, 6 Oct 2022 21:50:57 +0200 >> Thomas Petazzoni wrote: >> >> > Hello, >> > >> > On Thu, 6 Oct 2022 10:27:57 +0200 >> > Gwenhael Goavec-Merou wrote: >> > >> > > - Since gnuradio 3.10 swig was replaced by pybind. Now python >> libraries, >> > > bindings and python wrappers are produces using pybind: this why >> > > python-pybind is a buildtime dependency. This one is a stagging only >> > > package (nothing installed into target directory -> no select >> > > BR2_PACKAGE_PYTHON_PYBIND added to Config.in but >> GNURADIO_DEPENDENCIES is >> > > updated with python-pybind). >> > >> > I am sorry, but this still doesn't make any sense, and will in fact >> > cause build failures. A package cannot have a target package in its >> > _DEPENDENCIES variable without selecting it. >> > >> > If python-pybind is needed at build time on the host, then >> > GNURADIO_DEPENDENCIES must contain host-python-pybind, and nothing >> > needs to be done in Config.in. >> > >> > If python-pybind is needed on the target, then two options: >> > >> > (1) It's needed only at runtime => it should be selected in Config.in. >> > >> > (2) It's needed at build-time => it should be selected in Config.in >> > *and* and added as a dependency in GNURADIO_DEPENDENCIES. However, I'd >> > like to see a serious justification, because it is really uncommon to >> > have target Python packages be build-time dependencies. >> > >> I'm totally agree: gnuradio needs host-python-pybind. >> In fact pybind package is not really clear to me: >> - there is no host-python-pybind >> - python-pybind is used to populate staging >> (PYTHON_PYBIND_INSTALL_STAGING = >> YES) but nothing is installed into target (PYTHON_PYBIND_INSTALL_TARGET >> = NO) >> >> If I remember well (but unable to find thread) one of previous bump has >> required a long discussion with as result this status: maybe guillaume >> (in CC) >> could help to clarify situation. >> > Best regards, >> > >> > Thomas >> > -- >> > Thomas Petazzoni, co-owner and CEO, Bootlin >> > Embedded Linux and Kernel engineering and training >> > https://bootlin.com >> Regards, >> >> Gwenhael >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tianyuanhao3 at 163.com Sun Oct 9 11:14:23 2022 From: tianyuanhao3 at 163.com (TIAN Yuanhao) Date: Sun, 9 Oct 2022 04:14:23 -0700 Subject: [Buildroot] [PATCH v2 1/1] package/open-iscsi: new package In-Reply-To: <20220926154320.35494-1-tianyuanhao3@163.com> References: <20220926154320.35494-1-tianyuanhao3@163.com> Message-ID: <20221009111423.7654-1-tianyuanhao3@163.com> Signed-off-by: TIAN Yuanhao Cc: Thomas Petazzoni --- Changes in v2: - Remove installation logic (suggested by Thomas) While I think a lot of unnecessary stuff is installed, we still have a working iSCSI agent. --- DEVELOPERS | 1 + package/Config.in | 1 + package/open-iscsi/Config.in | 19 +++++++++++++++++++ package/open-iscsi/open-iscsi.hash | 3 +++ package/open-iscsi/open-iscsi.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 51 insertions(+) create mode 100644 package/open-iscsi/Config.in create mode 100644 package/open-iscsi/open-iscsi.hash create mode 100644 package/open-iscsi/open-iscsi.mk diff --git a/DEVELOPERS b/DEVELOPERS index 54216450f4..7a698c31c0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2791,6 +2791,7 @@ N: Sven Oliver Moll F: package/most/ N: TIAN Yuanhao +F: package/open-iscsi/ F: package/open-isns/ N: Theo Debrouwere diff --git a/package/Config.in b/package/Config.in index de51be400b..dacc317132 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2357,6 +2357,7 @@ endif source "package/odhcp6c/Config.in" source "package/odhcploc/Config.in" source "package/olsr/Config.in" + source "package/open-iscsi/Config.in" source "package/open-lldp/Config.in" source "package/open-plc-utils/Config.in" source "package/openntpd/Config.in" diff --git a/package/open-iscsi/Config.in b/package/open-iscsi/Config.in new file mode 100644 index 0000000000..04ec120e9a --- /dev/null +++ b/package/open-iscsi/Config.in @@ -0,0 +1,19 @@ +config BR2_PACKAGE_OPEN_ISCSI + bool "open-iscsi" + depends on BR2_USE_MMU # fork() + depends on BR2_TOOLCHAIN_HAS_THREADS # pthread + depends on !BR2_STATIC_LIBS # kmod + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_OPEN_ISNS + select BR2_PACKAGE_KMOD + select BR2_PACKAGE_UTIL_LINUX + select BR2_PACKAGE_UTIL_LINUX_LIBS + select BR2_PACKAGE_UTIL_LINUX_LIBMOUNT + help + iSCSI tools for Linux. + + https://www.open-iscsi.com + +comment "open-iscsi needs a toolchain w/ threads, dynamic library" + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/open-iscsi/open-iscsi.hash b/package/open-iscsi/open-iscsi.hash new file mode 100644 index 0000000000..9fd651cae8 --- /dev/null +++ b/package/open-iscsi/open-iscsi.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 9565bdf6b68b223e1e0d455d9a04d7536724a3f5b5a254e9398d06b2a0c6b6d2 open-iscsi-2.1.8.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/open-iscsi/open-iscsi.mk b/package/open-iscsi/open-iscsi.mk new file mode 100644 index 0000000000..4bbd96f591 --- /dev/null +++ b/package/open-iscsi/open-iscsi.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# open-iscsi +# +################################################################################ + +OPEN_ISCSI_VERSION = 2.1.8 +OPEN_ISCSI_SITE = $(call github,open-iscsi,open-iscsi,$(OPEN_ISCSI_VERSION)) +OPEN_ISCSI_LICENSE = GPL-2.0+ +OPEN_ISCSI_LICENSE_FILES = COPYING +OPEN_ISCSI_DEPENDENCIES = kmod open-isns openssl util-linux-libs + +OPEN_ISCSI_CONF_OPTS = -Ddbroot=/var/lib/iscsi + +ifeq ($(BR2_PACKAGE_SYSTEMD),y) +OPEN_ISCSI_DEPENDENCIES += systemd +OPEN_ISCSI_CONF_OPTS += -Dno_systemd=false +else +OPEN_ISCSI_CONF_OPTS += -Dno_systemd=true +endif + +define OPEN_ISCSI_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_SCSI_LOWLEVEL) + $(call KCONFIG_ENABLE_OPT,CONFIG_ISCSI_TCP) +endef + +$(eval $(meson-package)) -- 2.25.1 From romain.naour at gmail.com Sun Oct 9 15:35:21 2022 From: romain.naour at gmail.com (Romain Naour) Date: Sun, 9 Oct 2022 17:35:21 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os Message-ID: <20221009153521.12444-1-romain.naour@gmail.com> Backport upstream commit for x86_64 builds with -Os reported by [1]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 Signed-off-by: Romain Naour --- .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch new file mode 100644 index 0000000000..4470324f1c --- /dev/null +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch @@ -0,0 +1,48 @@ +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 +From: Adhemerval Zanella Netto +Date: Wed, 21 Sep 2022 10:51:08 -0300 +Subject: [PATCH] x86: Fix -Os build (BZ #29576) + +The compiler might transform __stpcpy calls (which are routed to +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy +multiarch implementation does not build any working symbol due +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). + +Checked on x86_64-linux-gnu. +Reviewed-by: Carlos O'Donell +Tested-by: Carlos O'Donell + +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) +Signed-off-by: Romain Naour +--- + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S + +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S +new file mode 100644 +index 0000000000..19439c553d +--- /dev/null ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S +@@ -0,0 +1,18 @@ ++/* Copyright (C) 2022 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ . */ ++ ++#include "../strcpy.S" +-- +2.34.3 + -- 2.34.3 From troglobit at gmail.com Sun Oct 9 15:59:28 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:28 +0200 Subject: [Buildroot] [PATCH 0/9] bump skarnet software: s6, execline, mdevd, etc. Message-ID: <20221009155938.2041695-1-troglobit@gmail.com> This patch series bumps the version of several of Laurent Bercot's packages. The idea was to upgrade mdevd, which depends on skalibs, but it in turn is a dependency for the other packages upgraded here. Please note, I've only tested mdevd, the orther packages have only been test built using test-pkg. The following skarnet.config was used: BR2_PACKAGE_SKALIBS=y BR2_PACKAGE_EXECLINE=y BR2_PACKAGE_S6_DNS=y BR2_PACKAGE_S6_LINUX_UTILS=y BR2_PACKAGE_S6_PORTABLE_UTILS=y BR2_PACKAGE_S6=y BR2_PACKAGE_S6_RC=y BR2_PACKAGE_S6_NETWORKING=y BR2_PACKAGE_MDEVD=y $ ./utils/test-pkg -c skarnet.config -p mdevd bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: SKIPPED bootlin-x86-64-musl [4/6]: OK br-arm-full-static [5/6]: OK sourcery-arm [6/6]: OK 6 builds, 1 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed Best regards /Joachim Joachim Wiberg (9): package/skalibs: bump to v2.12.0.1 package/mdevd: bump to v0.1.6.0 package/execline: bump to v2.9.0.1 package/s6: bump to v2.11.1.2 package/s6-linux-utils: bump to v2.6.0.0 package/s6-portable-utils: bump to v2.2.5.0 package/s6-dns: bump to v2.3.5.4 package/s6-networking: bump to v2.5.1.1 package/s6-rc: bump to v0.5.3.2 package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 18 files changed, 27 insertions(+), 27 deletions(-) -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:29 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:29 +0200 Subject: [Buildroot] [PATCH 1/9] package/skalibs: bump to v2.12.0.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-2-troglobit@gmail.com> Summary of changes: New: - New djbunix functions: waitn_posix(), waitn_reap_posix() - New unix-transactional.h function: opendir_at. - New skalibs/posixplz.h function: munmap_void(). - random functions now have an early version, to use when randomness is required before the generator can be seeded (i.e. in programs running in the very early boot). - envdir_internal() now has a SKALIBS_ENVDIR_NOCLAMP option allowing reading of unlimited-size variables. - fd_close() now chooses to adapt to Linux's close() behaviour (closing the fd on EINTR) over the HP-UX one (not closing it). Destructors like close() being allowed to fail has always been a mistake in the specification and a programming nightmare, making it impossible to behave correctly on all systems, but apparently standardization efforts are on the way and the Linux behaviour seems to be the chosen one. Removed: - libbiguint removed. - Obsolete skalibs/environ.h and skalibs/getpeereid.h headers removed. - rc4 and md5 functions removed. - iobuffer removed. fd_cat() and fd_catn() changed signatures. - All signal functions entirely reworked; cruft removed. - The unsafe cdb_successor() API has been removed. - random_init() and random_finish() removed, as well as random_char(). Renamed APIs and type: - random_string() renamed to random_buf(). - All *_t types renamed without the _t suffix, to preserve POSIX namespace. - subgetopt() renamed to lgetopt(). - skalibs/cdb_make.h renamed to skalibs/cdbmake.h; cdbmake functions now return 1 on success and 0 on failure. - skalibs/cdb.h redesigned to remove reader state from the cdb structure. Signed-off-by: Joachim Wiberg --- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/skalibs/skalibs.hash b/package/skalibs/skalibs.hash index 48e4028edc..dd202b97fb 100644 --- a/package/skalibs/skalibs.hash +++ b/package/skalibs/skalibs.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 b780b0ae650dda0c3ec5f8975174998af2d24c2a2e2be669b1bab46e73b1464d skalibs-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 3e228f72f18d88c17f6c4e0a66881d6d3779427b7e7e889f3142b6f26da30285 skalibs-2.12.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/skalibs/skalibs.mk b/package/skalibs/skalibs.mk index 77db57de96..0ff449a5ba 100644 --- a/package/skalibs/skalibs.mk +++ b/package/skalibs/skalibs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SKALIBS_VERSION = 2.10.0.3 +SKALIBS_VERSION = 2.12.0.1 SKALIBS_SITE = http://skarnet.org/software/skalibs SKALIBS_LICENSE = ISC SKALIBS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:30 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:30 +0200 Subject: [Buildroot] [PATCH 2/9] package/mdevd: bump to v0.1.6.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-3-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.1. - execline optional dependency bumped to 2.9.0.1. - New -O nlgroups option to mdevd, rebroadcasting uevents to the netlink after handling them. - The * and & action directives are now triggered by all action types. Signed-off-by: Joachim Wiberg --- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mdevd/mdevd.hash b/package/mdevd/mdevd.hash index 93950304be..dea2f14978 100644 --- a/package/mdevd/mdevd.hash +++ b/package/mdevd/mdevd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 ffd3b223b4cf0e51253b4a8f09cb88d70bf22693228ab0818af174a3f099dcd2 mdevd-0.1.4.0.tar.gz -sha256 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995 COPYING +sha256 33cf2b118634538fd24f302b30f52cc8aa28ea68b414916ce482b54a4ee57283 mdevd-0.1.6.0.tar.gz +sha256 7fe938b5e0fec18848955ca8081c532e24ae77310beb730b301e1f77bad3d390 COPYING diff --git a/package/mdevd/mdevd.mk b/package/mdevd/mdevd.mk index a0cd71e76e..9997cb5275 100644 --- a/package/mdevd/mdevd.mk +++ b/package/mdevd/mdevd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MDEVD_VERSION = 0.1.4.0 +MDEVD_VERSION = 0.1.6.0 MDEVD_SITE = http://skarnet.org/software/mdevd MDEVD_LICENSE = ISC MDEVD_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:32 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:32 +0200 Subject: [Buildroot] [PATCH 4/9] package/s6: bump to v2.11.1.2 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-5-troglobit@gmail.com> Summary of changes: - execline optional dependency bumped to 2.9.0.1. - skalibs dependency bumped to 2.12.0.0. - nsss optional dependency bumped to 0.2.0.1. - s6-svwait now supports the -r and -R options, to wait for service restarts. - The s6/lock.h, s6/supervise.h and s6/fdholder.h headers replace their previous versions that had an extra s6 prefix. - New binaries: s6-svlink, s6-svunlink, and s6-socklog. Signed-off-by: Joachim Wiberg --- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6/s6.hash b/package/s6/s6.hash index a829700d97..3c5ce4265a 100644 --- a/package/s6/s6.hash +++ b/package/s6/s6.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d21373151704150df0e8ed199f097f6ee5d2befb9a68aca4f20f3862e5d8757 s6-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c1474be3e889dac392cee307abe015cd4be0c85c725c84ea7f184f0e34503a2 s6-2.11.1.2.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6/s6.mk b/package/s6/s6.mk index ead82d7eaf..78962ed159 100644 --- a/package/s6/s6.mk +++ b/package/s6/s6.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_VERSION = 2.10.0.3 +S6_VERSION = 2.11.1.2 S6_SITE = http://skarnet.org/software/s6 S6_LICENSE = ISC S6_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:31 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:31 +0200 Subject: [Buildroot] [PATCH 3/9] package/execline: bump to v2.9.0.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-4-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - New options to wait: -o to wait for one of the listed processes, and -a to get the default behaviour. - wait now exits 99 on timeout. Signed-off-by: Joachim Wiberg --- package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/execline/execline.hash b/package/execline/execline.hash index 706b131afd..1d72e2cb49 100644 --- a/package/execline/execline.hash +++ b/package/execline/execline.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a373f497d2335905d750e2f3be2ba47a028c11c4a7d5595dca9965c161e53aed execline-2.8.0.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 01260fcaf80ffbca2a94aa55ea474dfb9e39b3033b55c8af88126791879531f6 execline-2.9.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/execline/execline.mk b/package/execline/execline.mk index c348d924b7..38f4570ba4 100644 --- a/package/execline/execline.mk +++ b/package/execline/execline.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXECLINE_VERSION = 2.8.0.1 +EXECLINE_VERSION = 2.9.0.1 EXECLINE_SITE = http://skarnet.org/software/execline EXECLINE_LICENSE = ISC EXECLINE_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:33 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:33 +0200 Subject: [Buildroot] [PATCH 5/9] package/s6-linux-utils: bump to v2.6.0.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-6-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - s6-fillurandompool has been replaced with the new rngseed program. Signed-off-by: Joachim Wiberg --- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-linux-utils/s6-linux-utils.hash b/package/s6-linux-utils/s6-linux-utils.hash index 27e7eb7b7a..c932a4363a 100644 --- a/package/s6-linux-utils/s6-linux-utils.hash +++ b/package/s6-linux-utils/s6-linux-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 c300dbf36b533083f82c6827830c55ce34bfc6cd493c782f207d199669a345ba s6-linux-utils-2.5.1.5.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c7132734a0c8287002ee6910c469f175a97d766a8023c0c33af8ba92643ed59 s6-linux-utils-2.6.0.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-linux-utils/s6-linux-utils.mk b/package/s6-linux-utils/s6-linux-utils.mk index 995ff1b855..ffa3ffac5b 100644 --- a/package/s6-linux-utils/s6-linux-utils.mk +++ b/package/s6-linux-utils/s6-linux-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_LINUX_UTILS_VERSION = 2.5.1.5 +S6_LINUX_UTILS_VERSION = 2.6.0.0 S6_LINUX_UTILS_SITE = http://skarnet.org/software/s6-linux-utils S6_LINUX_UTILS_LICENSE = ISC S6_LINUX_UTILS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:34 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:34 +0200 Subject: [Buildroot] [PATCH 6/9] package/s6-portable-utils: bump to v2.2.5.0 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-7-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-portable-utils/s6-portable-utils.hash b/package/s6-portable-utils/s6-portable-utils.hash index dd9f7df4bd..aa38c8b5da 100644 --- a/package/s6-portable-utils/s6-portable-utils.hash +++ b/package/s6-portable-utils/s6-portable-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 6627a2d3ea263539e83512a36f10a587fa0dd5e899bc3612187e9e3b9faf769c s6-portable-utils-2.2.3.2.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 ebb39f8934fd36f25d31352e61bbd94dc02b1e9f04411850d2fd9658bd916e36 s6-portable-utils-2.2.5.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-portable-utils/s6-portable-utils.mk b/package/s6-portable-utils/s6-portable-utils.mk index fb910320ea..8cdb4fa965 100644 --- a/package/s6-portable-utils/s6-portable-utils.mk +++ b/package/s6-portable-utils/s6-portable-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_PORTABLE_UTILS_VERSION = 2.2.3.2 +S6_PORTABLE_UTILS_VERSION = 2.2.5.0 S6_PORTABLE_UTILS_SITE = http://skarnet.org/software/s6-portable-utils S6_PORTABLE_UTILS_LICENSE = ISC S6_PORTABLE_UTILS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:35 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:35 +0200 Subject: [Buildroot] [PATCH 7/9] package/s6-dns: bump to v2.3.5.4 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-8-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-dns/s6-dns.hash b/package/s6-dns/s6-dns.hash index c63e96e129..5083024520 100644 --- a/package/s6-dns/s6-dns.hash +++ b/package/s6-dns/s6-dns.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 0c1d50e5d7bc65cbf59b6f37fbd7f6f5645694224bb8c4dc1943d7921bc74f63 s6-dns-2.3.5.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 76af222472c4754f83cdc59ad354255ce1b1e6f6833a059328463f8e51f4db43 s6-dns-2.3.5.4.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-dns/s6-dns.mk b/package/s6-dns/s6-dns.mk index dfde2c29f1..1b7d65570f 100644 --- a/package/s6-dns/s6-dns.mk +++ b/package/s6-dns/s6-dns.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_DNS_VERSION = 2.3.5.1 +S6_DNS_VERSION = 2.3.5.4 S6_DNS_SITE = http://skarnet.org/software/s6-dns S6_DNS_LICENSE = ISC S6_DNS_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:36 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:36 +0200 Subject: [Buildroot] [PATCH 8/9] package/s6-networking: bump to v2.5.1.1 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-9-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0 - s6-dns dependency bumped to 2.3.5.4 - skalibs dependency bumped to 2.11.1.0 - execline optional dependency bumped to 2.8.2.0 - s6 dependency bumped to 2.11.0.1 - The obsolete minidentd program has been removed. - LibreSSL optional dependency bumped to 3.3.4 - LibreTLS optional dependency bumped to 3.3.4 - Client certificates are now properly supported in s6-tlsd-io. Signed-off-by: Joachim Wiberg --- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-networking/s6-networking.hash b/package/s6-networking/s6-networking.hash index 9e333866d3..1890f95221 100644 --- a/package/s6-networking/s6-networking.hash +++ b/package/s6-networking/s6-networking.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a3fbca789dc5c82b3055fdbd2f55110902198f3136447617ce8f8b79fa8aa554 s6-networking-2.4.1.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 7ac79d4de3d9c13532e444ab7497c4e04ad0fa7229d502984d9dc7d48aa64418 s6-networking-2.5.1.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-networking/s6-networking.mk b/package/s6-networking/s6-networking.mk index 03807f0652..f740f22635 100644 --- a/package/s6-networking/s6-networking.mk +++ b/package/s6-networking/s6-networking.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_NETWORKING_VERSION = 2.4.1.1 +S6_NETWORKING_VERSION = 2.5.1.1 S6_NETWORKING_SITE = http://skarnet.org/software/s6-networking S6_NETWORKING_LICENSE = ISC S6_NETWORKING_LICENSE_FILES = COPYING -- 2.34.1 From troglobit at gmail.com Sun Oct 9 15:59:37 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 9 Oct 2022 17:59:37 +0200 Subject: [Buildroot] [PATCH 9/9] package/s6-rc: bump to v0.5.3.2 In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221009155938.2041695-10-troglobit@gmail.com> Summary of changes: - skalibs dependency bumped to 2.12.0.0. - execline dependency bumped to 2.9.0.0. - s6 dependency bumped to 2.11.1.0. - s6-rc-compile now reads service dependency information from the dependencies.d directory and bundle information from the contents.d directory, instead of the dependencies and contents flat files. The old format is still supported, but deprecated. Signed-off-by: Joachim Wiberg --- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-rc/s6-rc.hash b/package/s6-rc/s6-rc.hash index 8978d68ba6..0a84345e36 100644 --- a/package/s6-rc/s6-rc.hash +++ b/package/s6-rc/s6-rc.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 2a8d1cd455c05c8502b34517cfe79841aa46d08ad969076b37a15d3910617f89 s6-rc-0.5.2.2.tar.gz -sha256 4a5e44a69d649f0c37b29d7f6e5df1bb292b09898247be07f0c97814dac4b15d COPYING +sha256 4f24a4966a4aa353d2bd1a8afca9b88c7b7bd29c46b3a1a7f5305686b9d6e038 s6-rc-0.5.3.2.tar.gz +sha256 1898df1e8703bd9c1350d2ec3397880b9b4c1451038a9ce5e1c4b2e58622da39 COPYING diff --git a/package/s6-rc/s6-rc.mk b/package/s6-rc/s6-rc.mk index 05d7989735..85b047883b 100644 --- a/package/s6-rc/s6-rc.mk +++ b/package/s6-rc/s6-rc.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_RC_VERSION = 0.5.2.2 +S6_RC_VERSION = 0.5.3.2 S6_RC_SITE = http://skarnet.org/software/s6-rc S6_RC_LICENSE = ISC S6_RC_LICENSE_FILES = COPYING -- 2.34.1 From peter at korsgaard.com Sun Oct 9 18:06:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR In-Reply-To: <20221008170508.62837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:05:08 +0200") References: <20221008170508.62837-1-fontaine.fabrice@gmail.com> Message-ID: <87ilksrhw8.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR In-Reply-To: <20221008173619.76606-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:36:19 +0200") References: <20221008173619.76606-1-fontaine.fabrice@gmail.com> Message-ID: <87edvgrhw3.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR In-Reply-To: <20221008220716.150449-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:07:16 +0200") References: <20221008220716.150449-1-fontaine.fabrice@gmail.com> Message-ID: <87a664rhvx.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:06:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:06:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables In-Reply-To: <20221008221908.156459-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:19:08 +0200") References: <20221008221908.156459-1-fontaine.fabrice@gmail.com> Message-ID: <875ygsrhvl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE > identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:07:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:07:21 +0200 Subject: [Buildroot] [PATCH] package/libostree: bump to version 2022.6 In-Reply-To: <20221009084123.231395-1-marcus.folkesson@gmail.com> (Marcus Folkesson's message of "Sun, 9 Oct 2022 10:41:23 +0200") References: <20221009084123.231395-1-marcus.folkesson@gmail.com> Message-ID: <871qrgrhuu.fsf@dell.be.48ers.dk> >>>>> "Marcus" == Marcus Folkesson writes: > Signed-off-by: Marcus Folkesson Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:07:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 09 Oct 2022 20:07:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/rt-tests: bump version to 2.4 In-Reply-To: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> (=?utf-8?Q?=22S=C3=A9bastien?= Szymanski"'s message of "Fri, 7 Oct 2022 11:23:00 +0200") References: <20221007092300.1003-1-sebastien.szymanski@armadeus.com> Message-ID: <87wn98q39c.fsf@dell.be.48ers.dk> >>>>> "S?bastien" == S?bastien Szymanski writes: > Signed-off-by: S?bastien Szymanski Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 9 18:05:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:25 +0200 Subject: [Buildroot] [git commit] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221009180918.E57C886ADC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d95faeea442796d0f79cae2bc666824955a668fe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 9 18:07:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:07:14 +0200 Subject: [Buildroot] [git commit] package/libostree: bump to version 2022.6 Message-ID: <20221009180919.16F6786B03@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=197489d89284e6d4e469f823e822c8e75a9b40b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Marcus Folkesson Signed-off-by: Peter Korsgaard --- package/libostree/libostree.hash | 2 +- package/libostree/libostree.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libostree/libostree.hash b/package/libostree/libostree.hash index 6839d5439c..582af4b7b9 100644 --- a/package/libostree/libostree.hash +++ b/package/libostree/libostree.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 914c4d993bc111d7dd30ae9721b6ffe8ab56eb1fd6e81b097b09f400cc1b053f libostree-2022.5.tar.xz +sha256 835ef47d9a0b35a10c77ffd7f0fbd2e2b87f7cccb588da27442a05ff71ffad8c libostree-2022.6.tar.xz sha256 b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c COPYING diff --git a/package/libostree/libostree.mk b/package/libostree/libostree.mk index e0c955bc9a..e99da9d2cb 100644 --- a/package/libostree/libostree.mk +++ b/package/libostree/libostree.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSTREE_VERSION = 2022.5 +LIBOSTREE_VERSION = 2022.6 LIBOSTREE_SOURCE = libostree-$(LIBOSTREE_VERSION).tar.xz LIBOSTREE_SITE = https://github.com/ostreedev/ostree/releases/download/v$(LIBOSTREE_VERSION) From peter at korsgaard.com Sun Oct 9 18:05:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:39 +0200 Subject: [Buildroot] [git commit] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221009180919.0396086AE0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6a184841bd293fd85c5691382da13cbd2068e798 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 00fb7d9842..12e5ca7af4 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.8.0 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sun Oct 9 18:05:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:47 +0200 Subject: [Buildroot] [git commit] package/lrzip: add CPE variables Message-ID: <20221009180919.0D58686AE6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sun Oct 9 18:05:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:05:32 +0200 Subject: [Buildroot] [git commit] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221009180918.EE35786ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db5c4a06a6da5e64268667c7c07aa4154fec6919 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 3454907bab..d9a7ed1519 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sun Oct 9 18:07:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 9 Oct 2022 20:07:54 +0200 Subject: [Buildroot] [git commit] package/rt-tests: bump version to 2.4 Message-ID: <20221009180919.2071786ADC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e381fa9cf21f4384ffd6b305829417e9d2dd4d94 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: S??bastien Szymanski Signed-off-by: Peter Korsgaard --- package/rt-tests/rt-tests.hash | 2 +- package/rt-tests/rt-tests.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rt-tests/rt-tests.hash b/package/rt-tests/rt-tests.hash index 3adda60f42..49df8313f9 100644 --- a/package/rt-tests/rt-tests.hash +++ b/package/rt-tests/rt-tests.hash @@ -1,4 +1,4 @@ # From https://mirrors.edge.kernel.org/pub/linux/utils/rt-tests/sha256sums.asc -sha256 b5e7959bcb5c703b2743030751af975ea4e04962e29fc1118f4b605987585735 rt-tests-2.3.tar.xz +sha256 393457f0c91cce57e82b876ecb9b672871f898e6cecafc751548079512bcc808 rt-tests-2.4.tar.xz # locally computed hash sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/rt-tests/rt-tests.mk b/package/rt-tests/rt-tests.mk index 056a4a6723..74290211ce 100644 --- a/package/rt-tests/rt-tests.mk +++ b/package/rt-tests/rt-tests.mk @@ -6,7 +6,7 @@ RT_TESTS_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/rt-tests RT_TESTS_SOURCE = rt-tests-$(RT_TESTS_VERSION).tar.xz -RT_TESTS_VERSION = 2.3 +RT_TESTS_VERSION = 2.4 RT_TESTS_LICENSE = GPL-2.0+ RT_TESTS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 9 20:14:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 22:14:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/libmaxminddb: bump to version 1.7.1 Message-ID: <20221009201432.16067-1-fontaine.fabrice@gmail.com> https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md Signed-off-by: Fabrice Fontaine --- package/libmaxminddb/libmaxminddb.hash | 2 +- package/libmaxminddb/libmaxminddb.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmaxminddb/libmaxminddb.hash b/package/libmaxminddb/libmaxminddb.hash index cfe838f7e5..7e56351c0f 100644 --- a/package/libmaxminddb/libmaxminddb.hash +++ b/package/libmaxminddb/libmaxminddb.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 7620ac187c591ce21bcd7bf352376a3c56a933e684558a1f6bef4bd4f3f98267 libmaxminddb-1.6.0.tar.gz +sha256 e8414f0dedcecbc1f6c31cb65cd81650952ab0677a4d8c49cab603b3b8fb083e libmaxminddb-1.7.1.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/libmaxminddb/libmaxminddb.mk b/package/libmaxminddb/libmaxminddb.mk index 4037f89a15..993b4aec9d 100644 --- a/package/libmaxminddb/libmaxminddb.mk +++ b/package/libmaxminddb/libmaxminddb.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMAXMINDDB_VERSION = 1.6.0 +LIBMAXMINDDB_VERSION = 1.7.1 LIBMAXMINDDB_SITE = \ https://github.com/maxmind/libmaxminddb/releases/download/$(LIBMAXMINDDB_VERSION) LIBMAXMINDDB_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:06:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:06:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 Message-ID: <20221009210613.49541-1-fontaine.fabrice@gmail.com> This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:14:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:14:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/cppzmq: bump to version 4.9.0 Message-ID: <20221009211445.62107-1-fontaine.fabrice@gmail.com> https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 Signed-off-by: Fabrice Fontaine --- package/cppzmq/cppzmq.hash | 2 +- package/cppzmq/cppzmq.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/cppzmq/cppzmq.hash b/package/cppzmq/cppzmq.hash index 31b93275df..3fbee7af28 100644 --- a/package/cppzmq/cppzmq.hash +++ b/package/cppzmq/cppzmq.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7a23639a45f3a0049e11a188e29aaedd10b2f4845f0000cf3e22d6774ebde0af cppzmq-4.8.1.tar.gz +sha256 3fdf5b100206953f674c94d40599bdb3ea255244dcc42fab0d75855ee3645581 cppzmq-4.9.0.tar.gz sha256 7e6db90e2e805c72b3daa77849d1cb5f1f92da0e69750c8a4aa1d86d70704748 LICENSE diff --git a/package/cppzmq/cppzmq.mk b/package/cppzmq/cppzmq.mk index 570ad4e3a3..d702cc174e 100644 --- a/package/cppzmq/cppzmq.mk +++ b/package/cppzmq/cppzmq.mk @@ -4,7 +4,7 @@ # ################################################################################ -CPPZMQ_VERSION = 4.8.1 +CPPZMQ_VERSION = 4.9.0 CPPZMQ_SITE = $(call github,zeromq,cppzmq,v$(CPPZMQ_VERSION)) CPPZMQ_INSTALL_STAGING = YES CPPZMQ_DEPENDENCIES = host-pkgconf zeromq -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:23:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:23:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 Message-ID: <20221009212341.86425-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:32:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:32:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/checksec: bump to version 2.6.0 Message-ID: <20221009213212.92009-1-fontaine.fabrice@gmail.com> Update hash of LICENSE.txt (update in year with https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 Signed-off-by: Fabrice Fontaine --- package/checksec/checksec.hash | 4 ++-- package/checksec/checksec.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/checksec/checksec.hash b/package/checksec/checksec.hash index 41aae8188c..a29866ba07 100644 --- a/package/checksec/checksec.hash +++ b/package/checksec/checksec.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1034459d7cd2b0ee515c2b6b003375fec566fb59c838fc5e1961e1fcf76b54fa checksec-2.5.0.tar.gz -sha256 7888fee828bf56d547fc1f634e40638984148b4fc41373b7626eb465060640de LICENSE.txt +sha256 39d4158f96bdc7533ad6595703375c0046951fe4f6367b831ef92d9c66c1a307 checksec-2.6.0.tar.gz +sha256 55154b4be6dfcb3ff29d1e3648d0d07b3943a5fcc3af7c2e0e799b074734f722 LICENSE.txt diff --git a/package/checksec/checksec.mk b/package/checksec/checksec.mk index 61ef110f90..ed9846ac2d 100644 --- a/package/checksec/checksec.mk +++ b/package/checksec/checksec.mk @@ -4,7 +4,7 @@ # ################################################################################ -CHECKSEC_VERSION = 2.5.0 +CHECKSEC_VERSION = 2.6.0 CHECKSEC_SITE = $(call github,slimm609,checksec.sh,$(CHECKSEC_VERSION)) CHECKSEC_LICENSE = BSD-3-Clause CHECKSEC_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:38:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:38:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/freeipmi: bump to version 1.6.10 Message-ID: <20221009213823.116245-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS Signed-off-by: Fabrice Fontaine --- ...-rename-md2-and-md5-functions-macros.patch | 695 ------------------ package/freeipmi/freeipmi.hash | 2 +- package/freeipmi/freeipmi.mk | 2 +- 3 files changed, 2 insertions(+), 697 deletions(-) delete mode 100644 package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch diff --git a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch b/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch deleted file mode 100644 index 0de5b29c9c..0000000000 --- a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch +++ /dev/null @@ -1,695 +0,0 @@ -From 50eeda7f14c4eaa56aa86ba570a47557456544f2 Mon Sep 17 00:00:00 2001 -From: Albert Chu -Date: Wed, 19 Jan 2022 11:55:55 -0800 -Subject: [PATCH] libfreeipmi: rename md2 and md5 functions / macros - -Static compilation with libfreeipmi can lead to problems if -other software has similarly named md2/md5 functions -(such as md5_init()). Prefix all macros and functions with -'ipmi_' as needed. Update all callers accordingly. - -[Retrieved from: -https://github.com/chu11/freeipmi-mirror/commit/50eeda7f14c4eaa56aa86ba570a47557456544f2] -Signed-off-by: Fabrice Fontaine ---- - ChangeLog | 11 ++ - libfreeipmi/interface/ipmi-lan-interface.c | 48 +++---- - .../interface/ipmi-rmcpplus-interface.c | 2 +- - libfreeipmi/libcommon/ipmi-md2.c | 72 +++++------ - libfreeipmi/libcommon/ipmi-md2.h | 30 ++--- - libfreeipmi/libcommon/ipmi-md5.c | 64 +++++----- - libfreeipmi/libcommon/ipmi-md5.h | 18 +-- - libfreeipmi/util/ipmi-lan-util.c | 120 +++++++++--------- - 8 files changed, 188 insertions(+), 177 deletions(-) - -diff --git a/ChangeLog b/ChangeLog -index 883a195cf..60bf8c323 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,14 @@ -+2021-01-19 Albert Chu -+ -+ * libfreeipmi/libcommon/ipmi-md2.h, -+ libfreeipmi/libcommon/ipmi-md2.c, -+ libfreeipmi/libcommon/ipmi-md5.h, -+ libfreeipmi/libcommon/ipmi-md5.c: Static compilation with -+ libfreeipmi can lead to problems if other software has similarly -+ named md2/md5 functions (such as md5_init()). Prefix all macros -+ and functions with 'ipmi_' as needed. Update all callers -+ accordingly. -+ - 2022-01-18 Fabrice Fontaine - - * configure.ac: use pkg-config to find gcrypt -diff --git a/libfreeipmi/interface/ipmi-lan-interface.c b/libfreeipmi/interface/ipmi-lan-interface.c -index 20099d770..658be53e1 100644 ---- a/libfreeipmi/interface/ipmi-lan-interface.c -+++ b/libfreeipmi/interface/ipmi-lan-interface.c -@@ -533,37 +533,37 @@ assemble_ipmi_lan_pkt (fiid_obj_t obj_rmcp_hdr, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- uint8_t digest[MD2_DIGEST_LENGTH]; -+ ipmi_md2_t ctx; -+ uint8_t digest[IPMI_MD2_DIGEST_LENGTH]; - -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); - -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, msg_data_ptr, msg_data_count); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, digest, MD2_DIGEST_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, digest, IPMI_MD2_DIGEST_LENGTH); -+ ipmi_md2_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- uint8_t digest[MD5_DIGEST_LENGTH]; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, msg_data_ptr, msg_data_count); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, digest, MD5_DIGEST_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ uint8_t digest[IPMI_MD5_DIGEST_LENGTH]; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, digest, IPMI_MD5_DIGEST_LENGTH); -+ ipmi_md5_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } -diff --git a/libfreeipmi/interface/ipmi-rmcpplus-interface.c b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -index 1f462da7e..d1fd0753a 100644 ---- a/libfreeipmi/interface/ipmi-rmcpplus-interface.c -+++ b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -@@ -1134,7 +1134,7 @@ _construct_session_trlr_authentication_code (uint8_t integrity_algorithm, - { - hash_algorithm = IPMI_CRYPT_HASH_MD5; - hash_flags = 0; -- expected_digest_len = MD5_DIGEST_LENGTH; -+ expected_digest_len = IPMI_MD5_DIGEST_LENGTH; - copy_digest_len = IPMI_MD5_128_AUTHENTICATION_CODE_LENGTH; - } - else /* IPMI_INTEGRITY_ALGORITHM_HMAC_SHA256_128 */ -diff --git a/libfreeipmi/libcommon/ipmi-md2.c b/libfreeipmi/libcommon/ipmi-md2.c -index 6e9386be7..076b555bd 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.c -+++ b/libfreeipmi/libcommon/ipmi-md2.c -@@ -101,15 +101,15 @@ static unsigned char S[256] = - 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14 - }; - --#define L ctx->l --#define X ctx->x --#define C ctx->c --#define M ctx->m --#define Mlen ctx->mlen --#define MD2_MAGIC 0xf00fd00d -+#define L ctx->l -+#define X ctx->x -+#define C ctx->c -+#define M ctx->m -+#define Mlen ctx->mlen -+#define IPMI_MD2_MAGIC 0xf00fd00d - - int --md2_init (md2_t *ctx) -+ipmi_md2_init (ipmi_md2_t *ctx) - { - - if (ctx == NULL) -@@ -118,26 +118,26 @@ md2_init (md2_t *ctx) - return (-1); - } - -- ctx->magic = MD2_MAGIC; -+ ctx->magic = IPMI_MD2_MAGIC; - - L = 0; - Mlen = 0; -- memset (X, '\0', MD2_BUFFER_LENGTH); -- memset (C, '\0', MD2_CHKSUM_LENGTH); -- memset (M, '\0', MD2_BLOCK_LENGTH); -+ memset (X, '\0', IPMI_MD2_BUFFER_LENGTH); -+ memset (C, '\0', IPMI_MD2_CHKSUM_LENGTH); -+ memset (M, '\0', IPMI_MD2_BLOCK_LENGTH); - - return (0); - } - - static void --_md2_update_digest_and_checksum (md2_t *ctx) -+_ipmi_md2_update_digest_and_checksum (ipmi_md2_t *ctx) - { - unsigned int j, k; - uint8_t c, t; - - /* Update X */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - X[16+j] = M[j]; - X[32+j] = (X[16+j] ^ X[j]); -@@ -145,9 +145,9 @@ _md2_update_digest_and_checksum (md2_t *ctx) - - t = 0; - -- for (j = 0; j < MD2_ROUNDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_ROUNDS_LENGTH; j++) - { -- for (k = 0; k < MD2_BUFFER_LENGTH; k++) -+ for (k = 0; k < IPMI_MD2_BUFFER_LENGTH; k++) - { - t = X[k] = (X[k] ^ S[t]); - } -@@ -166,7 +166,7 @@ _md2_update_digest_and_checksum (md2_t *ctx) - * Set C[j] to C[j] xor S[c xor L]. - */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - c = M[j]; - C[j] = C[j] ^ S[c ^ L]; -@@ -175,10 +175,10 @@ _md2_update_digest_and_checksum (md2_t *ctx) - } - - int --md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD2_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -187,19 +187,19 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD2_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD2_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD2_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD2_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md2_update_digest_and_checksum (ctx); -+ _ipmi_md2_update_digest_and_checksum (ctx); - -- while ((buflen - bufcount) >= MD2_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD2_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD2_BLOCK_LENGTH); -- bufcount += MD2_BLOCK_LENGTH; -- _md2_update_digest_and_checksum (ctx); -+ memcpy (M, buf + bufcount, IPMI_MD2_BLOCK_LENGTH); -+ bufcount += IPMI_MD2_BLOCK_LENGTH; -+ _ipmi_md2_update_digest_and_checksum (ctx); - } - - Mlen = buflen - bufcount; -@@ -217,33 +217,33 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - } - - static void --_md2_append_padding_and_checksum (md2_t *ctx) -+_ipmi_md2_append_padding_and_checksum (ipmi_md2_t *ctx) - { - unsigned int padlen; - int padindex; - -- padlen = MD2_PADDING_LENGTH - Mlen; -+ padlen = IPMI_MD2_PADDING_LENGTH - Mlen; - padindex = padlen - 1; - -- md2_update_data (ctx, padding[padindex], padlen); -+ ipmi_md2_update_data (ctx, padding[padindex], padlen); - -- md2_update_data (ctx, C, MD2_CHKSUM_LENGTH); -+ ipmi_md2_update_data (ctx, C, IPMI_MD2_CHKSUM_LENGTH); - } - - int --md2_finish (md2_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen) - { -- if (ctx == NULL || ctx->magic != MD2_MAGIC -- || digest == NULL || digestlen < MD2_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC -+ || digest == NULL || digestlen < IPMI_MD2_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md2_append_padding_and_checksum (ctx); -- memcpy (digest, X, MD2_DIGEST_LENGTH); -+ _ipmi_md2_append_padding_and_checksum (ctx); -+ memcpy (digest, X, IPMI_MD2_DIGEST_LENGTH); - -- ctx->magic = ~MD2_MAGIC; -- return (MD2_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD2_MAGIC; -+ return (IPMI_MD2_DIGEST_LENGTH); - } - -diff --git a/libfreeipmi/libcommon/ipmi-md2.h b/libfreeipmi/libcommon/ipmi-md2.h -index c102fce2c..05328e85e 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.h -+++ b/libfreeipmi/libcommon/ipmi-md2.h -@@ -34,26 +34,26 @@ - - #include - --#define MD2_BLOCK_LENGTH 16 --#define MD2_BUFFER_LENGTH 48 --#define MD2_CHKSUM_LENGTH 16 --#define MD2_DIGEST_LENGTH 16 --#define MD2_PADDING_LENGTH 16 --#define MD2_ROUNDS_LENGTH 18 -- --typedef struct __md2 { -+#define IPMI_MD2_BLOCK_LENGTH 16 -+#define IPMI_MD2_BUFFER_LENGTH 48 -+#define IPMI_MD2_CHKSUM_LENGTH 16 -+#define IPMI_MD2_DIGEST_LENGTH 16 -+#define IPMI_MD2_PADDING_LENGTH 16 -+#define IPMI_MD2_ROUNDS_LENGTH 18 -+ -+typedef struct __ipmi_md2 { - uint32_t magic; - uint8_t l; - unsigned int mlen; -- uint8_t x[MD2_BUFFER_LENGTH]; -- uint8_t c[MD2_CHKSUM_LENGTH]; -- uint8_t m[MD2_BLOCK_LENGTH]; --} md2_t; -+ uint8_t x[IPMI_MD2_BUFFER_LENGTH]; -+ uint8_t c[IPMI_MD2_CHKSUM_LENGTH]; -+ uint8_t m[IPMI_MD2_BLOCK_LENGTH]; -+} ipmi_md2_t; - --int md2_init (md2_t *ctx); -+int ipmi_md2_init (ipmi_md2_t *ctx); - --int md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen); - --int md2_finish (md2_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD2_H */ -diff --git a/libfreeipmi/libcommon/ipmi-md5.c b/libfreeipmi/libcommon/ipmi-md5.c -index 17073b85f..c84e350a6 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.c -+++ b/libfreeipmi/libcommon/ipmi-md5.c -@@ -92,7 +92,7 @@ static uint32_t T[64] = - #define D ctx->d - #define M ctx->m - #define Mlen ctx->mlen --#define MD5_MAGIC 0xfb0fdb0d -+#define IPMI_MD5_MAGIC 0xfb0fdb0d - - #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) - #define G(x,y,z) (((x) & (z)) | ((y) & (~(z)))) -@@ -126,7 +126,7 @@ static uint32_t T[64] = - } while (0) - - int --md5_init (md5_t *ctx) -+ipmi_md5_init (ipmi_md5_t *ctx) - { - if (ctx == NULL) - { -@@ -134,13 +134,13 @@ md5_init (md5_t *ctx) - return (-1); - } - -- ctx->magic = MD5_MAGIC; -+ ctx->magic = IPMI_MD5_MAGIC; - - Mlen = 0; - ctx->bytes_mod_64 = 0; - ctx->bit_count[0] = 0; - ctx->bit_count[1] = 0; -- memset (M, '\0', MD5_BLOCK_LENGTH); -+ memset (M, '\0', IPMI_MD5_BLOCK_LENGTH); - - /* initial values are listed low-order byte first */ - A = 0x67452301; -@@ -152,16 +152,16 @@ md5_init (md5_t *ctx) - } - - static void --_md5_update_digest (md5_t *ctx) -+_ipmi_md5_update_digest (ipmi_md5_t *ctx) - { - uint32_t AA, BB, CC, DD; -- uint32_t X[MD5_BLOCK_WORDS_LENGTH]; -+ uint32_t X[IPMI_MD5_BLOCK_WORDS_LENGTH]; - unsigned int j; - - /* Note there are no endian issues here, compiler is required to - * handle shifts correctly - */ -- for (j = 0; j < MD5_BLOCK_WORDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD5_BLOCK_WORDS_LENGTH; j++) - X[j] = ((uint32_t)M[j*4] - | ((uint32_t)M[j*4+1] << 8) - | ((uint32_t)M[j*4+2] << 16) -@@ -251,7 +251,7 @@ _md5_update_digest (md5_t *ctx) - } - - static void --_md5_update_count (md5_t *ctx, unsigned int buflen) -+_ipmi_md5_update_count (ipmi_md5_t *ctx, unsigned int buflen) - { - - /* Use two uint32_t integers to hold our 64 bit count. -@@ -272,10 +272,10 @@ _md5_update_count (md5_t *ctx, unsigned int buflen) - } - - int --md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD5_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -284,28 +284,28 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD5_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD5_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD5_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD5_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md5_update_digest (ctx); -- _md5_update_count (ctx, bufcount); -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, bufcount); - -- while ((buflen - bufcount) >= MD5_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD5_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD5_BLOCK_LENGTH); -- bufcount += MD5_BLOCK_LENGTH; -- _md5_update_digest (ctx); -- _md5_update_count (ctx, MD5_BLOCK_LENGTH); -+ memcpy (M, buf + bufcount, IPMI_MD5_BLOCK_LENGTH); -+ bufcount += IPMI_MD5_BLOCK_LENGTH; -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, IPMI_MD5_BLOCK_LENGTH); - } - - Mlen = buflen - bufcount; - if (Mlen > 0) - { - memcpy (M, buf + bufcount, Mlen); -- _md5_update_count (ctx, Mlen); -+ _ipmi_md5_update_count (ctx, Mlen); - } - } - else -@@ -313,14 +313,14 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - /* Not enough data to update digest, just copy in data */ - memcpy (M + Mlen, buf, buflen); - Mlen += buflen; -- _md5_update_count (ctx, buflen); -+ _ipmi_md5_update_count (ctx, buflen); - } - - return (buflen); - } - - static void --_md5_append_padding_and_length (md5_t *ctx) -+_ipmi_md5_append_padding_and_length (ipmi_md5_t *ctx) - { - unsigned int padlen; - char length[8]; -@@ -348,23 +348,23 @@ _md5_append_padding_and_length (md5_t *ctx) - length[6] = (ctx->bit_count[0] & 0x00ff0000) >> 16; - length[7] = (ctx->bit_count[0] & 0xff000000) >> 24; - -- md5_update_data (ctx, padding, padlen); -- md5_update_data (ctx, length, 8); -+ ipmi_md5_update_data (ctx, padding, padlen); -+ ipmi_md5_update_data (ctx, length, 8); - } - - int --md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen) - { -- uint8_t buf[MD5_DIGEST_LENGTH]; -+ uint8_t buf[IPMI_MD5_DIGEST_LENGTH]; - -- if (ctx == NULL || ctx->magic != MD5_MAGIC -- || digest == NULL || digestlen < MD5_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC -+ || digest == NULL || digestlen < IPMI_MD5_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md5_append_padding_and_length (ctx); -+ _ipmi_md5_append_padding_and_length (ctx); - - /* Note there are no endian issues here, compiler is required to - * handle bitmasks and shifts correctly -@@ -387,7 +387,7 @@ md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) - buf[14] = (D & 0x00ff0000) >> 16; - buf[15] = (D & 0xff000000) >> 24; - -- memcpy (digest, buf, MD5_DIGEST_LENGTH); -- ctx->magic = ~MD5_MAGIC; -- return (MD5_DIGEST_LENGTH); -+ memcpy (digest, buf, IPMI_MD5_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD5_MAGIC; -+ return (IPMI_MD5_DIGEST_LENGTH); - } -diff --git a/libfreeipmi/libcommon/ipmi-md5.h b/libfreeipmi/libcommon/ipmi-md5.h -index 0f86f1754..6b863ef36 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.h -+++ b/libfreeipmi/libcommon/ipmi-md5.h -@@ -34,11 +34,11 @@ - - #include - --#define MD5_BLOCK_LENGTH 64 --#define MD5_BLOCK_WORDS_LENGTH (MD5_BLOCK_LENGTH/4) --#define MD5_DIGEST_LENGTH 16 -+#define IPMI_MD5_BLOCK_LENGTH 64 -+#define IPMI_MD5_BLOCK_WORDS_LENGTH (IPMI_MD5_BLOCK_LENGTH/4) -+#define IPMI_MD5_DIGEST_LENGTH 16 - --typedef struct __md5 { -+typedef struct __ipmi_md5 { - uint32_t magic; - unsigned int mlen; - unsigned int bytes_mod_64; -@@ -47,13 +47,13 @@ typedef struct __md5 { - uint32_t b; - uint32_t c; - uint32_t d; -- uint8_t m[MD5_BLOCK_LENGTH]; --} md5_t; -+ uint8_t m[IPMI_MD5_BLOCK_LENGTH]; -+} ipmi_md5_t; - --int md5_init (md5_t *ctx); -+int ipmi_md5_init (ipmi_md5_t *ctx); - --int md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen); - --int md5_finish (md5_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD5_H */ -diff --git a/libfreeipmi/util/ipmi-lan-util.c b/libfreeipmi/util/ipmi-lan-util.c -index cd269fcb9..a374acc8d 100644 ---- a/libfreeipmi/util/ipmi-lan-util.c -+++ b/libfreeipmi/util/ipmi-lan-util.c -@@ -281,33 +281,33 @@ ipmi_lan_check_session_authentication_code (fiid_obj_t obj_lan_session_hdr_rs, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, buf, len); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, buf, len); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, buf, len); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, buf, len); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - -@@ -451,45 +451,45 @@ ipmi_lan_check_packet_session_authentication_code (const void *pkt, - memcpy (pwbuf, authentication_code_data, authentication_code_data_len); - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md2_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md2_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md2_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md5_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md5_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md5_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - else /* authentication_type == IPMI_AUTHENTICATION_TYPE_STRAIGHT_PASSWORD_KEY diff --git a/package/freeipmi/freeipmi.hash b/package/freeipmi/freeipmi.hash index 05fb50bd4c..bc22d2ff6b 100644 --- a/package/freeipmi/freeipmi.hash +++ b/package/freeipmi/freeipmi.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 f25e1c35f3d0f1b5a99cc31ecc2353ca83ed46a15163842fba870127dc9c8206 freeipmi-1.6.9.tar.gz +sha256 fce4a1e401b6189c103d2b1203261d0bfbf45985c6f3fa44c51b186b13fe7a7d freeipmi-1.6.10.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.bmc-watchdog sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.ipmiconsole diff --git a/package/freeipmi/freeipmi.mk b/package/freeipmi/freeipmi.mk index b26ed0c0bf..916f2eb68a 100644 --- a/package/freeipmi/freeipmi.mk +++ b/package/freeipmi/freeipmi.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREEIPMI_VERSION = 1.6.9 +FREEIPMI_VERSION = 1.6.10 FREEIPMI_SITE = https://ftp.gnu.org/gnu/freeipmi FREEIPMI_LICENSE = GPL-3.0+, BSD-like (sunbmc) FREEIPMI_LICENSE_FILES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:49:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:49:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: bump to version 2 Message-ID: <20221009214945.128155-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Replace rjk_cv_python24 by rjk_cv_python3 due to https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md Signed-off-by: Fabrice Fontaine --- ...v3-attributes-according-to-draft-iet.patch | 30 ------------------- package/gesftpserver/gesftpserver.hash | 2 +- package/gesftpserver/gesftpserver.mk | 4 +-- 3 files changed, 3 insertions(+), 33 deletions(-) delete mode 100644 package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch diff --git a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch b/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch deleted file mode 100644 index 3697d0e525..0000000000 --- a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4b5c7eb63894bd2b1fedeb2a8e9bd16bf3c8c555 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Bernd=20Holzm=C3=BCller?= - -Date: Mon, 11 Feb 2019 23:57:01 +0100 -Subject: [PATCH] Change order of v3-attributes according to - draft-ietf-secsh-filexfer-00/02 - -[yann.morin.1998 at free.fr: backport from upstream] -Signed-off-by: "Yann E. MORIN" ---- - v3.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/v3.c b/v3.c -index 57cc31e..1fd86ad 100644 ---- a/v3.c -+++ b/v3.c -@@ -121,8 +121,8 @@ static void v3_sendattrs(struct sftpjob *job, const struct sftpattr *attrs) { - fatal("sending out-of-range mtime"); - if(a != attrs->atime.seconds) - fatal("sending out-of-range mtime"); -- sftp_send_uint32(job->worker, m); - sftp_send_uint32(job->worker, a); -+ sftp_send_uint32(job->worker, m); - } - /* Note that we just discard unknown bits rather than reporting errors. */ - } --- -2.14.1 - diff --git a/package/gesftpserver/gesftpserver.hash b/package/gesftpserver/gesftpserver.hash index 790cbe97c2..6d910a84dd 100644 --- a/package/gesftpserver/gesftpserver.hash +++ b/package/gesftpserver/gesftpserver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4963b85787de3485085a5356c671c58b8b33125f528ff1b2fe8b534ed8a0c1bd sftpserver-1.tar.gz +sha256 b18b10405ef2b05c45450aafd6803f69efb4d2138e4e07fd186c1618027ee169 sftpserver-2.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index 20ad92d25a..b47ec1c5d3 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -4,7 +4,7 @@ # ################################################################################ -GESFTPSERVER_VERSION = 1 +GESFTPSERVER_VERSION = 2 GESFTPSERVER_SOURCE = sftpserver-$(GESFTPSERVER_VERSION).tar.gz GESFTPSERVER_SITE = http://www.greenend.org.uk/rjk/sftpserver GESFTPSERVER_LICENSE = GPL-2.0+ @@ -25,7 +25,7 @@ GESFTPSERVER_DEPENDENCIES += \ # Python on the host is only used for tests, which we don't use in # Buildroot -GESFTPSERVER_CONF_ENV += rjk_cv_python24=false +GESFTPSERVER_CONF_ENV += rjk_cv_python3=false # openssh/dropbear looks here define GESFTPSERVER_ADD_SYMLINK -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 21:58:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 9 Oct 2022 23:58:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/gmrender-resurrect: bump to version 0.1 Message-ID: <20221009215801.227838-1-fontaine.fabrice@gmail.com> gmrender-resurrect uses threads since https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 Signed-off-by: Fabrice Fontaine --- package/gmrender-resurrect/Config.in | 2 +- package/gmrender-resurrect/gmrender-resurrect.hash | 2 +- package/gmrender-resurrect/gmrender-resurrect.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gmrender-resurrect/Config.in b/package/gmrender-resurrect/Config.in index db655ad7f4..de52410a73 100644 --- a/package/gmrender-resurrect/Config.in +++ b/package/gmrender-resurrect/Config.in @@ -1,7 +1,7 @@ config BR2_PACKAGE_GMRENDER_RESURRECT bool "gmrender-resurrect" depends on BR2_USE_WCHAR # gstreamer1 -> libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer1 -> libglib2, libupnp + depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_MMU # gstreamer1 select BR2_PACKAGE_GSTREAMER1 select BR2_PACKAGE_GST1_PLUGINS_BASE # run-time only diff --git a/package/gmrender-resurrect/gmrender-resurrect.hash b/package/gmrender-resurrect/gmrender-resurrect.hash index 526b2b6c34..f14abffc3b 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.hash +++ b/package/gmrender-resurrect/gmrender-resurrect.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c3a9c80c7058a9a1f32175da25a564fb3021a7055c2df3941e8da8860a509009 gmrender-resurrect-0.0.9.tar.gz +sha256 550b07bc6a073176ad7de0efd603663c9875311dfb81ae1075263e3fd6974335 gmrender-resurrect-0.1.tar.gz sha256 c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42 COPYING diff --git a/package/gmrender-resurrect/gmrender-resurrect.mk b/package/gmrender-resurrect/gmrender-resurrect.mk index 4a7efd71ab..77ac83ca41 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.mk +++ b/package/gmrender-resurrect/gmrender-resurrect.mk @@ -4,7 +4,7 @@ # ################################################################################ -GMRENDER_RESURRECT_VERSION = 0.0.9 +GMRENDER_RESURRECT_VERSION = 0.1 GMRENDER_RESURRECT_SITE = $(call github,hzeller,gmrender-resurrect,v$(GMRENDER_RESURRECT_VERSION)) # Original distribution does not have default configure, # so we need to autoreconf: -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 22:02:50 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 10 Oct 2022 00:02:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 Message-ID: <20221009220250.310026-1-fontaine.fabrice@gmail.com> This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 9 22:06:38 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 10 Oct 2022 00:06:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/isl: bump to version 0.25 Message-ID: <20221009220638.319188-1-fontaine.fabrice@gmail.com> https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 Signed-off-by: Fabrice Fontaine --- package/isl/isl.hash | 2 +- package/isl/isl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/isl/isl.hash b/package/isl/isl.hash index 001fc9d115..46d8e920f3 100644 --- a/package/isl/isl.hash +++ b/package/isl/isl.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 043105cc544f416b48736fff8caf077fb0663a717d06b1113f16e391ac99ebad isl-0.24.tar.xz +sha256 be7b210647ccadf90a2f0b000fca11a4d40546374a850db67adb32fad4b230d9 isl-0.25.tar.xz sha256 3a2c398103f6bca0f50a9a9465deca9230b370b0212af5fdf31ed88a36215c30 LICENSE diff --git a/package/isl/isl.mk b/package/isl/isl.mk index 51e608b304..ce9aaecebc 100644 --- a/package/isl/isl.mk +++ b/package/isl/isl.mk @@ -4,7 +4,7 @@ # ################################################################################ -ISL_VERSION = 0.24 +ISL_VERSION = 0.25 ISL_SOURCE = isl-$(ISL_VERSION).tar.xz ISL_SITE = https://libisl.sourceforge.io ISL_LICENSE = MIT -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 9 23:37:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 9 Oct 2022 19:37:47 -0400 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <20221009153521.12444-1-romain.naour@gmail.com> References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: > > Backport upstream commit for x86_64 builds with -Os reported by [1]. > > [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 I think this also fixes an issue in autobuilders, see: https://patchwork.ozlabs.org/project/buildroot/patch/20220927031702.2918414-1-james.hilliard1 at gmail.com/ http://autobuild.buildroot.net/results/5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > > Signed-off-by: Romain Naour Reviewed-by: James Hilliard > --- > .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > > diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > new file mode 100644 > index 0000000000..4470324f1c > --- /dev/null > +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch > @@ -0,0 +1,48 @@ > +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 > +From: Adhemerval Zanella Netto > +Date: Wed, 21 Sep 2022 10:51:08 -0300 > +Subject: [PATCH] x86: Fix -Os build (BZ #29576) > + > +The compiler might transform __stpcpy calls (which are routed to > +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy > +multiarch implementation does not build any working symbol due > +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). > + > +Checked on x86_64-linux-gnu. > +Reviewed-by: Carlos O'Donell > +Tested-by: Carlos O'Donell > + > +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) This is probably better than mine since I had applied from patchwork before it was applied upstream. > +Signed-off-by: Romain Naour > +--- > + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ > + 1 file changed, 18 insertions(+) > + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S > + > +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S > +new file mode 100644 > +index 0000000000..19439c553d > +--- /dev/null > ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S > +@@ -0,0 +1,18 @@ > ++/* Copyright (C) 2022 Free Software Foundation, Inc. > ++ This file is part of the GNU C Library. > ++ > ++ The GNU C Library is free software; you can redistribute it and/or > ++ modify it under the terms of the GNU Lesser General Public > ++ License as published by the Free Software Foundation; either > ++ version 2.1 of the License, or (at your option) any later version. > ++ > ++ The GNU C Library is distributed in the hope that it will be useful, > ++ but WITHOUT ANY WARRANTY; without even the implied warranty of > ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > ++ Lesser General Public License for more details. > ++ > ++ You should have received a copy of the GNU Lesser General Public > ++ License along with the GNU C Library; if not, see > ++ . */ > ++ > ++#include "../strcpy.S" > +-- > +2.34.3 > + > -- > 2.34.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Mon Oct 10 00:35:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 9 Oct 2022 18:35:15 -0600 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility Message-ID: <20221010003515.796446-1-james.hilliard1@gmail.com> Backport a patch fixing compatibility with upcoming make 4.4. Fixes: - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 Signed-off-by: James Hilliard --- ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 100644 index 0000000000..0c82d7abbe --- /dev/null +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1,117 @@ +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 +From: Sergei Trofimovich +Date: Tue, 13 Sep 2022 13:39:13 -0400 +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 + [BZ# 29564] + +make-4.4 will add long flags to MAKEFLAGS variable: + + * WARNING: Backward-incompatibility! + Previously only simple (one-letter) options were added to the MAKEFLAGS + variable that was visible while parsing makefiles. Now, all options + are available in MAKEFLAGS. + +This causes locale builds to fail when long options are used: + + $ make --shuffle + ... + make -C localedata install-locales + make: invalid shuffle mode: '1662724426r' + +The change fixes it by passing eash option via whitespace and dashes. +That way option is appended to both single-word form and whitespace +separated form. + +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering +out --long-options. Otherwise options like --shuffle flag enable silent +mode unintentionally. $(silent-make) variable consolidates the checks. + +Resolves: BZ# 29564 + +CC: Paul Smith +CC: Siddhesh Poyarekar +Signed-off-by: Sergei Trofimovich +Reviewed-by: Siddhesh Poyarekar +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +2d7ed98add14f75041499ac189696c9bd3d757fe] +--- + Makeconfig | 18 +++++++++++++++++- + Makerules | 4 ++-- + elf/rtld-Rules | 2 +- + 3 files changed, 20 insertions(+), 4 deletions(-) + +diff --git a/Makeconfig b/Makeconfig +index f8164a0025..842f49eb58 100644 +--- a/Makeconfig ++++ b/Makeconfig +@@ -43,6 +43,22 @@ else + $(error objdir must be defined by the build-directory Makefile) + endif + ++# Did we request 'make -s' run? "yes" or "no". ++# Starting from make-4.4 MAKEFLAGS now contains long ++# options like '--shuffle'. To detect presence of 's' ++# we pick first word with short options. Long options ++# are guaranteed to come after whitespace. We use '-' ++# prefix to always have a word before long options ++# even if no short options were passed. ++# Typical MAKEFLAGS values to watch for: ++# "rs --shuffle=42" (silent) ++# " --shuffle" (not silent) ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) ++silent-make := no ++else ++silent-make := yes ++endif ++ + # Root of the sysdeps tree. + sysdep_dir := $(..)sysdeps + export sysdep_dir := $(sysdep_dir) +@@ -917,7 +933,7 @@ endif + # umpteen zillion filenames along with it (we use `...' instead) + # but we don't want this echoing done when the user has said + # he doesn't want to see commands echoed by using -s. +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s ++ifeq ($(silent-make),yes) # if -s + +cmdecho := echo >/dev/null + else # not -s + +cmdecho := echo +diff --git a/Makerules b/Makerules +index d1e139d03c..09c0cf8357 100644 +--- a/Makerules ++++ b/Makerules +@@ -794,7 +794,7 @@ endif + # Maximize efficiency by minimizing the number of rules. + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. + # Don't define any builtin rules. +-MAKEFLAGS := $(MAKEFLAGS)r ++MAKEFLAGS := $(MAKEFLAGS) -r + + # Generic rule for making directories. + %/: +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +diff --git a/elf/rtld-Rules b/elf/rtld-Rules +index ca00dd1fe2..3c5e273f2b 100644 +--- a/elf/rtld-Rules ++++ b/elf/rtld-Rules +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ + mv -f $@T $@ + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +-- +2.34.1 + -- 2.34.1 From ju.o at free.fr Mon Oct 10 03:09:37 2022 From: ju.o at free.fr (Julien Olivain) Date: Sun, 9 Oct 2022 23:09:37 -0400 Subject: [Buildroot] [PATCH 1/1] support/config-fragments/autobuild: fix bootlin-xtensa-uclibc.config Message-ID: <20221010030937.6432-1-ju.o@free.fr> Commit 4cbf7336914f25478aea943456ba7dc3c892c21a "arch/xtensa: custom configuration requires an overlay" added an error message if BR2_XTENSA_CUSTOM is set and BR_ARCH_XTENSA_OVERLAY_FILE is unset. When testing a package with the command: ./utils/test-pkg --all --package somepackage bootlin-xtensa-uclibc toolchain is always failing with error in the logfile: arch/arch.mk.xtensa:4: *** No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting. Stop. This commit fixes the toolchain config fragment by adding the same overlay file found in qemu_xtensa_lx60_defconfig. Signed-off-by: Julien Olivain --- support/config-fragments/autobuild/bootlin-xtensa-uclibc.config | 1 + 1 file changed, 1 insertion(+) diff --git a/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config b/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config index c44525b203..780a41df47 100644 --- a/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config +++ b/support/config-fragments/autobuild/bootlin-xtensa-uclibc.config @@ -1,5 +1,6 @@ BR2_xtensa=y BR2_XTENSA_CUSTOM=y BR2_XTENSA_LITTLE_ENDIAN=y +BR2_XTENSA_OVERLAY_FILE="https://github.com/jcmvbkbc/xtensa-toolchain-build/raw/95291b7c39e6f790d0b2f062c945a630290f2c81/overlays/xtensa_dc233c.tar.gz" BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE=y -- 2.37.3 From romain.naour at smile.fr Mon Oct 10 07:34:51 2022 From: romain.naour at smile.fr (Romain Naour) Date: Mon, 10 Oct 2022 09:34:51 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> Hello James, Le 10/10/2022 ? 01:37, James Hilliard a ?crit?: > On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: >> >> Backport upstream commit for x86_64 builds with -Os reported by [1]. >> >> [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 >> >> Fixes: >> https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 >> https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 > > I think this also fixes an issue in autobuilders, see: > https://patchwork.ozlabs.org/project/buildroot/patch/20220927031702.2918414-1-james.hilliard1 at gmail.com/ Sorry I missed it in the patchwork it was on the second page already... > > http://autobuild.buildroot.net/results/5b4/5b442f95587ddc65a995bbd9e310c88a66c55b1f > >> >> Signed-off-by: Romain Naour > > Reviewed-by: James Hilliard > >> --- >> .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ >> 1 file changed, 48 insertions(+) >> create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> >> diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> new file mode 100644 >> index 0000000000..4470324f1c >> --- /dev/null >> +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >> @@ -0,0 +1,48 @@ >> +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 >> +From: Adhemerval Zanella Netto >> +Date: Wed, 21 Sep 2022 10:51:08 -0300 >> +Subject: [PATCH] x86: Fix -Os build (BZ #29576) >> + >> +The compiler might transform __stpcpy calls (which are routed to >> +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy >> +multiarch implementation does not build any working symbol due >> +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). >> + >> +Checked on x86_64-linux-gnu. >> +Reviewed-by: Carlos O'Donell >> +Tested-by: Carlos O'Donell >> + >> +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) > > This is probably better than mine since I had applied from patchwork before > it was applied upstream. Yes maybe... even it doesn't come from the 2.36 stable branch. I replied on the bug report, so the commit may be backported soon. Best regards, Romain > >> +Signed-off-by: Romain Naour >> +--- >> + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ >> + 1 file changed, 18 insertions(+) >> + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S >> + >> +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S >> +new file mode 100644 >> +index 0000000000..19439c553d >> +--- /dev/null >> ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S >> +@@ -0,0 +1,18 @@ >> ++/* Copyright (C) 2022 Free Software Foundation, Inc. >> ++ This file is part of the GNU C Library. >> ++ >> ++ The GNU C Library is free software; you can redistribute it and/or >> ++ modify it under the terms of the GNU Lesser General Public >> ++ License as published by the Free Software Foundation; either >> ++ version 2.1 of the License, or (at your option) any later version. >> ++ >> ++ The GNU C Library is distributed in the hope that it will be useful, >> ++ but WITHOUT ANY WARRANTY; without even the implied warranty of >> ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >> ++ Lesser General Public License for more details. >> ++ >> ++ You should have received a copy of the GNU Lesser General Public >> ++ License along with the GNU C Library; if not, see >> ++ . */ >> ++ >> ++#include "../strcpy.S" >> +-- >> +2.34.3 >> + >> -- >> 2.34.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mf at go-sys.de Mon Oct 10 07:56:24 2022 From: mf at go-sys.de (Michael Fischer) Date: Mon, 10 Oct 2022 09:56:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/sdl2: bump version to 2.24.1 Message-ID: <20221010075624.8662-1-mf@go-sys.de> Signed-off-by: Michael Fischer --- package/sdl2/sdl2.hash | 4 ++-- package/sdl2/sdl2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sdl2/sdl2.hash b/package/sdl2/sdl2.hash index 981c98531e..782c552c52 100644 --- a/package/sdl2/sdl2.hash +++ b/package/sdl2/sdl2.hash @@ -1,4 +1,4 @@ -# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.0.tar.gz.sig -sha256 91e4c34b1768f92d399b078e171448c6af18cafda743987ed2064a28954d6d97 SDL2-2.24.0.tar.gz +# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.1.tar.gz.sig +sha256 bc121588b1105065598ce38078026a414c28ea95e66ed2adab4c44d80b309e1b SDL2-2.24.1.tar.gz # Locally calculated sha256 fcb07e07ac6bc8b2fcf047b50431ef4ebe5b619d7ca7c82212018309a9067426 LICENSE.txt diff --git a/package/sdl2/sdl2.mk b/package/sdl2/sdl2.mk index 4585c33c9b..28e2c5cb36 100644 --- a/package/sdl2/sdl2.mk +++ b/package/sdl2/sdl2.mk @@ -4,7 +4,7 @@ # ################################################################################ -SDL2_VERSION = 2.24.0 +SDL2_VERSION = 2.24.1 SDL2_SOURCE = SDL2-$(SDL2_VERSION).tar.gz SDL2_SITE = http://www.libsdl.org/release SDL2_LICENSE = Zlib -- 2.20.1 From james.hilliard1 at gmail.com Mon Oct 10 08:49:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 02:49:43 -0600 Subject: [Buildroot] [PATCH 1/2] package/ell: bump to version 0.53 Message-ID: <20221010084944.685684-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/ell/ell.hash | 2 +- package/ell/ell.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ell/ell.hash b/package/ell/ell.hash index 9affa390b8..68832c3201 100644 --- a/package/ell/ell.hash +++ b/package/ell/ell.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/libs/ell/sha256sums.asc -sha256 a7ff8ecbc76b187d942dd22b61cb489711400897c790319ffb7e944791687c3f ell-0.49.tar.xz +sha256 a7d0df846af839bbea1b80f292166371070328854b3fa785b5c607fe600552ad ell-0.53.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/ell/ell.mk b/package/ell/ell.mk index 9735865eae..b27d6feb65 100644 --- a/package/ell/ell.mk +++ b/package/ell/ell.mk @@ -4,7 +4,7 @@ # ################################################################################ -ELL_VERSION = 0.49 +ELL_VERSION = 0.53 ELL_SOURCE = ell-$(ELL_VERSION).tar.xz ELL_SITE = $(BR2_KERNEL_MIRROR)/linux/libs/ell ELL_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 10 08:49:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 02:49:44 -0600 Subject: [Buildroot] [PATCH 2/2] package/iwd: bump to version 1.30 In-Reply-To: <20221010084944.685684-1-james.hilliard1@gmail.com> References: <20221010084944.685684-1-james.hilliard1@gmail.com> Message-ID: <20221010084944.685684-2-james.hilliard1@gmail.com> Drop patch which is now upstream. Signed-off-by: James Hilliard --- ...-src-storage.c-fix-build-with-uclibc.patch | 37 ------------------- package/iwd/iwd.hash | 2 +- package/iwd/iwd.mk | 2 +- 3 files changed, 2 insertions(+), 39 deletions(-) delete mode 100644 package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch diff --git a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch b/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch deleted file mode 100644 index 55fdaa86fd..0000000000 --- a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 99e74ade2ea892e6d0b070bec1df6a135ce2c8b3 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Mar 2022 16:35:49 +0100 -Subject: [PATCH] src/storage.c: fix build with uclibc - -explicit_bzero is used in src/storage.c since commit -01cd8587606bf2da1af245163150589834126c1c but src/missing.h is not -included, as a result build with uclibc fails on: - -/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init': -storage.c:(.text+0x13a4): undefined reference to `explicit_bzero' - -Fixes: - - http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1 - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://lists.01.org/hyperkitty/list/iwd at lists.01.org/thread/WB2XXRBUDHC5IVFDEOJBK23JHPURL427] ---- - src/storage.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/storage.c b/src/storage.c -index 82a72443..aa8066b1 100644 ---- a/src/storage.c -+++ b/src/storage.c -@@ -44,6 +44,7 @@ - #include - #include "ell/useful.h" - -+#include "src/missing.h" - #include "src/common.h" - #include "src/storage.h" - #include "src/crypto.h" --- -2.35.1 - diff --git a/package/iwd/iwd.hash b/package/iwd/iwd.hash index 1c34aa0a90..e7971cd637 100644 --- a/package/iwd/iwd.hash +++ b/package/iwd/iwd.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/network/wireless/sha256sums.asc -sha256 3f138e03301beb2afc7b385a62f56db17059137857ab579f269c4e441783e760 iwd-1.25.tar.xz +sha256 9fd13512dc27d83efb8d341f7df98f5488f70131686021fcd0d93fc97af013b8 iwd-1.30.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..4a818f0b82 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -4,7 +4,7 @@ # ################################################################################ -IWD_VERSION = 1.25 +IWD_VERSION = 1.30 IWD_SOURCE = iwd-$(IWD_VERSION).tar.xz IWD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/wireless IWD_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 10 09:04:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 10 Oct 2022 03:04:18 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.6 Message-ID: <20221010090418.1604258-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..f69bbf7fb8 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 ed3aa1e217ade804e76651fe8e7803becc0b7831c42d6f31b8636f07f9b2260b maturin-0.13.6.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..8204a8354f 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.6 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/78/25/c418cf59a7735a065405d9ab63423603c38bd55712ce0f5e11f2ae248cf9 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 10 15:12:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 10 Oct 2022 17:12:57 +0200 Subject: [Buildroot] [PATCH v2 1/2] package/efivar: bump to version 38 In-Reply-To: References: <20221004143943.1456694-1-nunes.erico@gmail.com> <20221006221236.7dd6580a@windsurf> Message-ID: <20221010171257.6076a845@windsurf> Hello Erico, On Fri, 7 Oct 2022 08:46:10 +0200 Erico Nunes wrote: > I did check for related work in upstream and there are two relevant reports: > https://github.com/rhboot/efivar/issues/130 reports the makeguids > issue in cross compilation. There is no solution proposal for it in > its current state though. > One potential solution is to change the build to something less > custom, like meson, then in https://github.com/rhboot/efivar/pull/216 > there is a draft pull request to actually move it to meson. > Assuming that gets in for the next efivar release, the Buildroot > specific patch could be dropped by then. > I think what I can do at this point is test that locally to see if it > addresses the major problem that we have with Buildroot for a future > version bump and provide some feedback there. Thanks for this work! Indeed, if a meson-based build system is in progress, it doesn't make sense to work on a better patch/solution for the existing hand-written build system. Let's wait for the meson-based build system to arrive. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 10 06:46:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 10 Oct 2022 06:46:03 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 Message-ID: <20221010064610.388468291C@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-09 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 4 | 0 | 10 | 2022.05.x | 13 | 16 | 0 | 29 | 2022.08.x | 12 | 12 | 0 | 24 | master | 144 | 690 | 7 | 841 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 226 berkeleydb-5.3.28 | 21 host-binutils-2.38 | 19 host-gcc-initial-11.3.0 | 19 bearssl-0.6 | 17 linux-6.0 | 15 gpm-1.20.7 | 14 ocf-linux-20171122 | 14 host-f2fs-tools-1.15.0 | 13 ca-certificates-20211016 | 12 igd2-for-linux-2.1 | 12 crun-1.5 | 11 slang-2.3.2 | 11 host-sentry-cli-1.59.0 | 10 libnss-3.83 | 8 sysvinit-2.99 | 8 btrfs-progs-5.16.2 | 7 coremark-pro-1.1.2743 | 7 host-gcc-final-11.3.0 | 7 host-go-1.19.1 | 7 perl-5.34.1 | 7 autofs-5.1.8 | 6 brltty | 5 fbset-2.1 | 5 host-gcc-initial-10.4.0 | 5 libglib2-2.72.3 | 5 batman-adv-2021.4 | 4 efivar-38 | 4 elfutils-0.186 | 4 sdl-1.2.15 | 4 toolchain-external-codescap... | 4 unknown | 4 cryptodev-linux-1.12 | 3 dieharder-3.31.1 | 3 exempi-2.6.1 | 3 file-5.41 | 3 frotz-2.54 | 3 gerbera-1.10.0 | 3 hdparm-9.63 | 3 host-binutils-2.37 | 3 host-gcc-initial-12.2.0 | 3 host-pahole-73383b3a39afe86... | 3 host-rust-1.64.0 | 3 host-spirv-llvm-translator-... | 3 libarchive-3.6.1 | 3 libdeflate-1.12 | 3 libee-0.4.1 | 3 linux-5.10.145-cip17 | 3 lxc-4.0.12 | 3 mmc-utils-d40ec535b9d4e4c97... | 3 musepack-r475 | 3 ntp-4.2.8p15 | 3 systemd-250.4 | 3 zeek-4.1.1 | 3 zlib-ng-2.0.6 | 3 cryptopp-8.6.0 | 2 dahdi-linux-5c840cf43838e06... | 2 dash-0.5.11.5 | 2 dmraid-1.0.0.rc16-3 | 2 dropbear-2022.82 | 2 frr-8.3.1 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 gobject-introspection | 2 host-berkeleydb-5.3.28 | 2 host-binutils-2.39 | 2 libcap-ng-0.8.3 | 2 linux-5.10.145-cip17-rt7 | 2 ltp-testsuite-20220930 | 2 mongodb-4.2.18 | 2 musl-1.2.3 | 2 netsurf-3.10 | 2 wolfssl-5.5.1 | 2 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 android-tools-4.2.2+git2013... | 1 apcupsd-3.14.14 | 1 apparmor-3.0.4 | 1 assimp-5.2.5 | 1 augeas-1.12.0 | 1 azure-iot-sdk-c-LTS_07_2022... | 1 binutils-arc-2020.09-release | 1 boost-1.80.0 | 1 brotli-1.0.9 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dhcp-4.4.3 | 1 duma-2.5.15 | 1 erlang-22.3.4.22 | 1 expat-2.4.9 | 1 f2fs-tools-1.15.0 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fwts-22.09.00 | 1 gdb-11.2 | 1 gobject-introspection-1.72.0 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-riscv-isa-sim-1.1.0 | 1 igh-ethercat-1.5.2 | 1 lcdproc-0.5.9 | 1 lcms2-2.13.1 | 1 libblockdev-2.26 | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libgpg-error-1.45 | 1 liblog4c-localtime-1.0 | 1 libmdbx-0.11.11 | 1 libunwind-1.6.2 | 1 libusb-1.0.26 | 1 linux-pam-1.5.2 | 1 linuxptp-3.1.1 | 1 liquid-dsp-1.4.0 | 1 lpc32xxcdl-2.11 | 1 lttng-modules-2.13.1 | 1 luaossl-20220711-0 | 1 lz4-1.9.3 | 1 make: *** wait: No child pr... | 1 mariadb-10.3.36 | 1 memcached-1.6.16 | 1 mender-3.4.0 | 1 mesa3d-22.1.6 | 1 mimic-1.1.0 | 1 mpv-0.33.1 | 1 nanocom-1.0 | 1 netsniff-ng-0.6.8 | 1 olsr-0.9.8 | 1 open62541-v1.3.3 | 1 opensbi-0.9 | 1 pcsc-lite-1.9.8 | 1 python-pycryptodomex-3.15.0 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 sudo-1.9.11p2 | 1 trinity-1.9 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 unrar-6.1.7 | 1 v4l2loopback-0.12.7 | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 xenomai-3.0.10 | 1 xserver_xorg-server-21.1.4 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f4f416d13adea49b9a5fd38e1fcf98a1d0c5dfec | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/145e6ec60cced2902abda0a5cc08545fee4da3cd | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/36bfcd092d37bf4c2b9a32094df9b0e3183b39ed | arceb | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/1430dd87c785759e62ce102b214b70e20684bd31 | arc | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/2459caab7dd7d790f7013eb0ad25403bfe6c6f68 | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/04c2e80af39a306c7e9daa5826dbe14256515097 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/c5f28cea83b7f614255899a859c4dc9d223bc6f8 | ORPH arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/8a2775ea1cd197ac2687c31560af19b5071e6052 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e32aa8c4e61c82b2af8f57eefd79b7d938aed8e3 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4dca9872cbd6d40717aa77801e7c1de8790db01e | arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3ad563da5beb7d53562ca042f6157c1b4b36675 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f995af5982d421635aa2a6991a6d04d498267f26 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/adbe13a38a7e597c6f820dca492246075f5e0622 | sparc | azure-iot-sdk-c-LTS_07_2022... | NOK | http://autobuild.buildroot.net/results/15022948993f52493678f373f9f5a8543ca912b2 | nios2 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/3057ef4d6b461ab95a49c860bb054e898a219dea | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/9b9b89c2f26ac12f505cfa4ec71d1e8c63e95db5 | mips64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/59f43b7fac8e68e6888769be72788f00156a1d90 | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b5361b930815c9d6c8b7c1b03056dcde050cb7ca | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1bf55b598ecf14187a0348f3640a7f08fd24783c | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/31d72dfff9afc7db4d4709bc3f798b85b25bbb52 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9783777a72d6709bffdf1bd9f5a8bb0421fbeb6a | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/47a6ec18589e2a60b1362697cfc64d4fe2875dfa | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/61a7c7a1281fd7ec9eedcca65b5241f424f4428b | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/96d0c516415e16a3ad0c01dcf41050c528ef488c | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a4b2e962208c6c5f0bf67726ed303492c6807d75 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/356c813fa794ff68055360e9e00fe0d70fd0b9a4 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f80a3d7394867d68907903286902c9fc22c235be | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6052c6621de7509a61f79a8ac11c71993c988621 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b359231acd377acee995cb8903b135fba2b991d6 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/30e6da89801925621fc36dafa8b241925988497d | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6c428aa8f842abe5d8754f8a1b50d71f98980249 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/24e9b3e56e7f316e91cbd1444db8bf79dd7b480c | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/43b4614295bc29786565efaf3a607aeb4d64f646 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7a32a8016d468a554f921638be224ff6deae1e01 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c60720076dc081ae642a09e5091ed6ed6185f84a | s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/55d0b8aa9ae64654cc1ce0d1791ee4365a701498 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d34e3907aeedf11e48d07ad007c54398e971b27 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f21022c3fac3374581298bee4d74fe2ab357942d | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/922a3f360e5b53d25ddd5f7d478b6df7253e234b | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/22db780eff0e4bdeeb31913eea7637e58b519ecb | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fa35250157b30b992237dc00cd23c9c6389f6aac | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5a9657d738e3bd4d60693dfdbdeae5eed5abbbee | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0f9a4fe6ac0e3397cab23f28aaa9b5e6c03924dd | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/81a6cfc33e11e08639a5fd2d109e778221ffafd4 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a66129733bfd32181310981e3226bd663ec7386f | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/62f9e11656ef9915e89715a55fb300aadbb578b0 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9d422a435a6187686867a8a469d88e4d5e35ca61 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/29fbdfec9b5faf6549364985d75cb66dbcc1e7e5 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e73045557c30073c70da358cf2268d2b0b18bbfa | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/01c7231690011661e9d4f1ca7be93061fb5b515e | ORPH riscv32 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e71c03786361a94d377ca5ecf68bbd8e64809994 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/88dad0f4ee0afe589e53cc79d98c871ed942f886 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6caae728345e965867ecbf8a785b87b8f38cd3dd | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3bd41aae76b5becb185ef6fb32ab38c988e067b1 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/895cb37b2b685ba380fe695e088e8526615e6ea1 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/dead4d4c5735f5298077d63b1b9b961fdd7b36df | ORPH arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/90223169d187e221d6346a77ae45d910f23d97e8 | aarch64_be | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/261a852bae6fc2559bd592f9ef1ba906eec6406a | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/5a4c200ca80b7f98b3a66ce9e37f3572c7f0a51f | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/79de315a0c158206dfabaf8c644c6f577d3f34d3 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/992d5ab6beeceb906e4845795a94b061df98a8d7 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/6c02a5a1ffe17aa45834cacbf2d4426676fd6647 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/0649269321244881e86e1b9e5ca0457e7bc8b532 | arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/36e6ad28cfdb93cc722f9cf6cfd1b9e951b6c7b7 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/06c2f46cb9647a61392db3f1992dafe367368a66 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/925dc1a34402be362944905194d88eaa806d5e2f | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ff5595db0ee366211733f357dc8551a99c40114 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1f6e5022b90771afeb86ac4780cab571d475a6c9 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/625e48964b1efa9615da73e5b3209eaad387d935 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f46984da82a74eb9b5448efa98c6559548f50d59 | ORPH sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7896d9bfd70c58fe405ce8f7af3a53e2e9b9da63 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bf6a39603150d14f804fc848c70023daa4f0381f | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/010b4f278cae625faa118a7d8ff744e129fe8bca | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e0446d34e90da0d806ca55b33b0b1a71c6ac4b7c | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ff4039d777ebd2c4771a52ffbf5958ffc96c41b7 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b7fa27065b84c580dd84a68ea092a794d175a38b | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8f97adcc3fec27a845515c1c3c21511151340a98 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6183830d0f7acef9d1797687def6a6759b703125 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/acb61d2f81e472f1efdf1253d6b2f2a7acfbc143 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/13e8489040bf8058569649d7c970e766a9a4e32a | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7d53d6fce55b92b7f2d0f2b48d269474bb18cf33 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/de4b3331effec0487737108abf3bcbda1042207a | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/127bbcabf6188b2d9b7e591dc16501c6728e9315 | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/cb1bdd3fa361d1163382694ae5fcffa4619fbf08 | ORPH sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/be8e9e1d680150c389c655497de0438bef3d4673 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7aeca0f4bf23dc17fc1b196b9b56a88040c53ed4 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/658ceb82ff78e38eede744ecfa388259174cd360 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f432eda14dae23c074a1976b389e5c56d207ba06 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b01493236b92462a6385c4280bf1940b5cc73ad | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f7b7fd63bf1bd7e42bdc6394459e5df4af8eb18e | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fc190f9c52417092b86244f28c1571953591130a | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/163d8c80a8271a035fe76972e0acb4222389b4ff | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/89754b06e28918ae86726af5028050e5e20e9ae3 | powerpc64le | crun-1.5 | NOK | http://autobuild.buildroot.net/results/be3fed4884b20bb9398632f3fd31c9b16b7a4333 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b5c0c282a7cf7ea893ca35838ca6df12cae5f9c8 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4044b1aa94120035ef985bb9715ffdc82d949268 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/260096c8c6d9c2739e0223580e34c7ad3dcb89fe | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2c7fd3e20e5898fa5d99a36d461c7ca7402de729 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9dd05c5f0a46a6dcfeb2d30c9223751121a87bde | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/90ea95c5a74d030fd0d259ee011b93ed35ef6070 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d9a52d88d8d09fb45e5fbf045c07ee716894feef | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f539ea31ff794422f525c9fa9b9b1b3b55056224 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/9803fb398c80b6f65d00f278a0accfa9266f4397 | ORPH mips64el | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/e37972f5f6611fdfce1cc4640297237361c98d72 | ORPH mips | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/23e5f1f60aa41f0ff7489d20a80fd4e15a01d13c | ORPH powerpc64le | cryptopp-8.6.0 | NOK | http://autobuild.buildroot.net/results/fd67ae1297be8ceac03e28121626fda61ccbdc00 | sh4aeb | cryptopp-8.6.0 | NOK | http://autobuild.buildroot.net/results/7e429b39e7e1d37c9123213352a5f1c8e1e29bb8 | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a86cf24f38c2c77e551ce3c259ac0e09b26ced49 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/008482a781f782b4165a0eab3c123b0da549372e | xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/faf1311bf2c3c41c2e91515b551676b70ee88a66 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0938e85c3311533b649aecfb6c94df1a4677b99b | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/9711767d21511487f5c00a1bb3ae451f26d4b0c6 | ORPH m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/28b155a43382975ba388db8e80e56360c0595ffe | xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/25ff3c73915d372c90a106e4ee8633c49a36069c | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/13e06a96ba768cbd6b2e38b870cc9800b31f33df | arceb | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/352884d6af1c2569b990465f75c73fd38ffeaf01 | ORPH arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/3799a3a5dba8d0112b24434787f1152a4e2a2320 | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/7c5c667405cc302a1ca5b3dc7f1f7e0e696bc97a | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/d5a08fb40b41f0907b5d97795988d77c92df43b2 | x86_64 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/a4aaeefa91856b9b5060a071523b994c9134d2b1 | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d04f4f2eda0a3d71b70c5213a363eb867e449f6 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/f8c43c3340262c9bb22fa636183dc25c87823c11 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d0bf49ac6232f01d7e73570363d6b9e7e23b0f40 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/fd72bbd20b0471cb2d287d463efa6aa8e0fb2aa1 | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/65a4646cef30523f45b704ef25a85addb96d7bb6 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2a0f682ee37d4b59c898067857f8fccda32ac551 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3121637a5882167afedea7beb05406baff9f9de7 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b6541e3e8e0fa843f1de4a8e7b1c8f657b1db5b1 | ORPH powerpc | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/26be00f3414a8f923131657e267a137f12339edd | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/e697b160b8261ea8d892c08bd3f592c811a33c09 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/32f2a17a244e7a7a5ade6b05257093858d9d47e5 | mips64el | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/528f989ccc2fa70175993ee50f568baa14381222 | powerpc64le | expat-2.4.9 | NOK | http://autobuild.buildroot.net/results/3a373c6ed00590bdea2ec06acf38b393be76bb06 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6290855744d8f2e9c8e9cdc42f3dbf950c2c9c14 | mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/e81b0dd7f4d4ae2fa501a94b5585e30b4948e2f1 | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/69fad545ed8343f847f1df1547f086f5214f70ff | ORPH arc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/9302180c0777871f777fc2c3c09960f74f0e491e | ORPH mipsel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/0ff5185a98218c3c16ddb75ffbed2aa9980a1121 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/c62238f10a6e2fb1d7068c963898fb5f14569b25 | ORPH armeb | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/17781b5a2d8b551b1b4d09def8dd03d74bba5550 | mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/e554a9c5a21205fd15eb55dbe6979e1ccc7a380c | ORPH mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/d23773e811b5697ce92740313023153c3130ef06 | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/f109eae21aae888d6699d3bb6c5a180f500df9fb | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/6ea9cb5f4a3735c538de4c2480a54ee109d5a4ec | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/3d94b4b34335b76355f79706c91090b4fe701f99 | aarch64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/e5eaa48ace88af1605b1a460aed418f49e61d4ed | microblazeel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/e3dd3a941e39f730634be1b1e36c9f1fa0c149f8 | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/69468621c859336289f8be8d376d9d67bf686e86 | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/fa81560b72c119f70809459a9b4e927a89bba93e | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/6064181ef324a051cc75a3677392bb0b1708ab22 | arceb | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/30965a22882ff01c1a96d11952df329a9e66791a | aarch64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/e5303f962be0f380110a0bec7ab8e8e98d808e74 | microblaze | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/684c264701b4bd29f29749d3d14934ffdbdc16e6 | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/27cc153fb97be4d71d6f423706de58f5b9016e7e | i686 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/8837217bc75714669596cc2073782ea6c5aecb2a | arm | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/6f3b6a9fa83463a8b095146aacbd4975d29144d6 | ORPH arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/a448580d6ccf6722c5f1860bfb76ab6a6d24de7f | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d290399849ee3258752747bdeb14ae63485476cc | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1b5a2fb467d6206069e88544eed9ab63a6b60b72 | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1139e91b5262e7c6bb52c0db0114b8c6f00b87f2 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ec917c20e59691e3743932c0ce85f1350ee5a223 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2b3205d7718f7b7043ae63885d71ba9d9274e7d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33cea25cdca33f5a9e601f6ae37e1c54d25bc93b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc7d0e9daf01980f99cda87e74b06aba53e5f684 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/849e0d4a3324f5bdc421f82eeb796e357029670e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6ff43f7de8382ecd68266e4d9eadac13871d25e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29ca1f280f1a6a37722039291bfb871bc8d126de | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd01db4555343e4478d47c1bcde3bbc4d61477e8 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cd95f941ce8d330414c12ff797949709aee2153 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae289a79d63e8c31b6b2b7b7804264b738e059db | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3434fa29eda37d4a588b20a7a875b1a0c04b1952 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83eb07ee998e5761782db1ecda70a1eb45418011 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7381ec0fd82fe7ec0f90b9ac8f3baad3cefb06cc | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/503beff0501f0979ef090b874e1ab78ca3b6ce40 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8a83e0cb169c866bc1dbdde5fb6a608b93c795f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9eaba9a2d270bcbafb00564e4934f6c3bdb1019a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ddb6c2d31806b484e14d4f8d0d118976a13eaf4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99221b02c015b31a5f5cb3185068b8985b3fb0c4 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70c8d5d65033b8e64f98d0c9676078987eac6d0a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b2d84c2ffc232db280113e344f31e639b3bc183 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ff26e6fdca2a3594b9ea765c47b05cf02c104e6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea48c92df6a491e100eab3c27399a18bd1a8f019 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77fe222871923ba1178ec9fa3b499336c085b6f2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f73d040b10e9939e0aec9942d61506cb00a1bcc7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07d4396a988e34b0006cb8806663098000d918ca | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d0301b9ea0205bd5eca7f371470256bbd13fc44 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f59ad252a30fe3ef21b14bf39cebdc1d86962d8 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1f7692551684554fad768fa42636c6eb088a72c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5704facab2919b76ce60b028fd62ea9846b87c72 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1acbc0e59c7449ac317ad3fcf2166a8c9fce51e7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fcc5933229767628a1325d3be4227901fe7d1db | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/450809380be168c9ad81b237290c094afceb9320 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb3beae7188ca2746d98a8628e6b11e833f6e8eb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2fb9df6f3fd64598bb0140ed4390f3f97c30c28 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd21258fd01382930d88f195ea6c09b85a4391c4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a741fdf49f4494d19763c6da8e24dc45531ae755 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/363948dc41e9c193860bd084c8301a3f35ef23a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4433bd0ed2a2161c71a65e0c5dbe33f080fa2d69 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa734ac04c104fef457cda1ab3c16281bad80208 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f27ed0639c40941097b0b44bcc8ee3208ad3a69f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/691f24d9a37a35cf815c1073299d9f38c1ac5069 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/001695610aa5cb1ee07e9b70554349ae82764c54 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96b4c2c0691387e39ed16766785354fcea4c3e46 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ef8fe92bac0dc91fe5e369ca02e9f76351273d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e26d14895459757001bb3a33451172d59ccfc7f1 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14f85dde1ffae1a774e7809fa47d2de975f9a852 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41a3a830635414680648edda2e123b2e561da7b5 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c10e112f9b0831634362e1f3ae556e69250a640 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1694160f82f12bdd7c892b0d1380ae879eedfac | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d55200c36dab13a550b6505289dfc7ffb74b989 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82f2041a99fb0a25297ed2c82742cb7e5d1cd77c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bef72771bb2928514646a122180ad7d19eba67bb | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7508cd4aebdbff8f840836b64846a77ac896f3c6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a10528f5578f80b75e8739c27ea16f5bf0e1de03 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/463e0f96ff780596bcf882940748dca19621711e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f62105eb5ad970891b7f19218bbba570d87a7e2b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61bc22449a6d03a8beb550e03587d474f3deb3fd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8f2b9c5892d0e7fd1ca8ab4f86f8c5a1711d2b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/744c55f73d6f65186ab43854da356979a847e4c0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/710f3e92d0afc907baa171d835b1a37616096631 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc470f76b33fa0bd1894c4817698319fc4eb41bf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bb28b8ed3be630834664ff06b43446bfe389680 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98f6791b4a8df7c7d45b003893a8b90d4f31213e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647063e7bcc478ab073fe5497162b55247570b25 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6883f74ba6c7868973f40e7d13b42cb4ebbd653b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/87cc07b81ecab1370205448ae51a848a9481580c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8772d9b31eaae97b2a402b23f91a3d941b4808f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4a31c57fdebadcc40bb9df5111edbecbbf77b89 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/659203ba2000069cfd58594276fd6b3ff3b629ce | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb7050d434b4f260c9f8b9daec69fdfd37739c3b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffd538cf5b3e8e08b8e4036514688237f400c7b4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd282c9fb96330c341211877875279b250f3d1a7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a14a3c8a51eb509ac02e9926397fdc7ebd2acf8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ae110092e80552de52189fe647d4a6252a8efee | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cb3c8636a41e1f6913e63c453ca48bed81369fe8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3a902b6f79becd70f08e870e140b6959549f08e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4742c63a904f4225195d524d660be81684ce089b | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e05d52006ddc934822baf4f2fe1c9366931e0996 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39cd6c0bc90f81cd67aa519d0327ec4b72826592 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7625733943436d48b486f382ae2415dd6f15a28e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/615d750043bfb831357c7ec69522e416365c40e1 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d02ad8666c47efdd6793c166f7b06f011d44f41 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b82c2291c99d76208cbb7d5410cf6a5cd05932c7 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2af984445bbe02a9239396a03e94f749b5a6bf3c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a883187b3c07c5c0f9d6c9277de7453483f9e33e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c9eff6a5e0bdd42575983a81250f997a887f22a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b222387746dc55810969d0eae948c86e53446b3a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aadfb899fe876451aa7acd3bc08e7708c8faae1 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57eee3c4a9a9f17b48637d43c1bb46d61d518c66 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4e138686886148b8a231f9cd2f6f28319e5d966 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d66c6175817557a3f540309a6e78285dd47695a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cda5694b2254ce2330bcc3115af8f1391c33dbb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/11007473ed07d006f3759640bad6f1cf55e07187 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76629659078a6352c4b7d1b14dcb4b35dd7e761c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7af9661274e208157c51d2edc7da394541d42fad | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a95ff5972f6fb4f0fb327af685620e8d0a5eb1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/428c1d9f47af158340dbc1f0749e5e1aa6417398 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df2a6adf0ea609648a40d276a36fbab430604dea | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60998785e2ea569ed2379222fac0f3d8653ea4b0 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4a9336b4e34cc90e7da63e139c352b77f98b0f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf659e5027e06c51efa7ba04e5386f53e5cc07c2 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/848d9d616f8b694748defe4d46eaefc6498718d5 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a2278f0d5bfdb6bbe5485e090377e6c9e7e223b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09b7d24cc11d2523cb16d4ef4e7883a8dcf913b4 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf5a5a91c39b8192d1f30e13d3ce0d2ef8f42337 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/680408a9c54c44a8e4ed57df656c6c6ebad8bcbe | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f5f371e107cefa50a4d93bdb1afb512b07bfb40 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/84aa596e2d2df82cc3620b0319eccd5a9994fcbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/483bd7222df9d351a7181d0a7798a09ed3ac3fd5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2370c57796a9207e52810365ba9a8430353a11a4 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9a81b529fd8b87caef54c8622e76da208bed643 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3ed8d715df3f1c5380876ae239ab7a70ee0a6f7 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b25024ba75111b2084b90cfb0995721e7d541826 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2224e7a9b8606131f9e9b32b9ee5ec5a88e910ad | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b6b2fb0f7af80533d79ff8171c8e240fe3be83c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5de2c24bb150f4e48776d11603efd6d04ff850aa | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9678ceb39618c1b6cc93c287c74d8b2bbcf4b08a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba9bf9bd0c2f7155ac59aa2ebff3c9939ac6642e | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/adc2fedfc991870126aa3ce13260721bd9772fe2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46184b1ef7b43d56ed6142b495060fde4cb24de8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc3654593c08b9e4c60710720c6c3d0c9bc5e07a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f270ed442986554a369eee3d644c65f6d92812a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9166a616b4e05a897683a9ab1f08e9cdacdaf055 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6555e3bd4d1c0a7fd7463e91bde3f3f5489574d1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e5d1be49659d46bbbfb2cc4b23e1c5481168e76 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80e08fae6293595bdc257601a33d7177799c9152 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc963e3df83e91847460b69e1a2f7c395a7f18d1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8838ee5f0293e82543466a42f39855c31a94c83a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8282977ae72fd6e444edb0396b9f1db5c5daaca4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/737a2c10335ee5d799796e99ed5779f85c4f331d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1fcf617cd014a98f4f759c96d7a71247dedab7f0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36a565e4d230213fb227a7b6a4d2e638dfdb3b82 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b4921097f04fe445724c2353e6b9bcff1723a0 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/561c0d4d36d5358d7ffdc51283b53aebd8911a24 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e17fd9683c45821d971ee23b774f89a9bd2674a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2bb99c91ed0b987ddb3a90c3e50d7213a0ce987 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfd4d86b7de2bec7b346e06c4d30a782a9f062cd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40c939bd4065bb7cec1c28cecda9f5c102583de7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b6b281d76a3d8577603bf0cc7a1b3f9d9afd19d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d1001ffd2568feaafe71c6680a182c2545cadc97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9027422785510fe0bc76c0837efee5eb5a682c29 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/222e8e33812053ddbf9b89361b85095679d2ca6d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85e65f66219dd1392350737a2fa7ba8df6b6a157 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fef7944f9579f2d0cf1d7c3a6bfdf0950ff933a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0eaee9e098fb37974f2da4b5a72f6064f4ffe051 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7b4c871007c73117c713dffbe509c2ba7b375a7 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/94d36855b6b1253c00a1293667d36da32ef6fed9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1101e9804baa973aeb701f9c40cce8a9fd4971c3 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/764fdd8e09ac3413604b02179b2b3ee692173aad | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c472024a04c63e36da74fcf52c0989971724fc05 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0889142fa7df106bbbf4bfc60fda81ae7c8bb85a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c99b4772997b0dc0b2c6ad7cee5c0ed06b75799 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec16173d93fecc2be526f3abf6b1d9dc5bf5eaa2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9cdec64a260686901df4f2be2c1f7a329e1d3407 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e43399dcae900ea2776a0ad726a01c93b20dbe18 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44c1d7e262f9b14a32e65e7f43b80c6a65426448 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13fdfee7e9cc11e4b58c060d9c10acdd0cf2737a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85ee627eb09055b58ab944a212215c7ccb7388ad | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd7c94eb37366fab77855e321456f03e30da5901 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eaf392ab4b33d99897ebfccf27bcc84ba7213eaf | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4288e7ba9b08552e6a7492d32e325aa03d32189f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95f2f9d19566c6f77d790fdcddce9cdadacbf3cc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5604ad863af974f5a73a24a0fb4df5f18f69a490 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320e559bff6f55eb56c20a5d6ca1eebc894d176e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a44b047a6f2d4596f566cc9a6bc9c794c50a13ec | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1805020d18166780601e0dcdad085aa1d38d148c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ac7816e06f74fce84e5dfee0cc5069d20499c61 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbee2d55b0d8d15bc354350b88fe4827e0ce8dac | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/826c804cf49263a9ed96d8f1fc3b48bd944e3d5e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b3880c20b1fc48c080b1b502fdf9329050274e78 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4b07c1bb9673d97b7b5d7b5a274e74ef7141ffef | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70844491cc9bd2743b5d9f33e18a6e8fde784868 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faa79fcc1557579ec052641f991e924dea0d92cc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2f8b36f351a51bbbca5afde14a5cef049b8247b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b4742fdc211816568be25dcbfc15e32648d194c7 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38c52b5540b35a99d7fdeff7dd3cb6c9569751ed | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ba51b48c72aeb22e91dfc470acf3878866799d4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/797519811278ab462c8658c9e8dbbc69ab35dbcb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2278839acbfab149ae482869a807916b1481a5c7 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e69e234d05b575bf8ff2efa91b69f65c2eecf4aa | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95fe195818397b9347bdfacbdfdadd30f6f5f19d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8312e4803bac04a736e63e633239b504cb9b7f2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db9b02ecfcc009ae5018cc768d13680ccb29997e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8c308ccbdbe3db2b53f22ff8c5323fd76258c7f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79f71ec31e02e8d7c6ef8475bd0dd8d2cd92a73e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66f422cfaafe69dedd980c523fa94e016cd13cd2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a179a4fcd638af506b96f6beb7dc8855681d435 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfed0b2156a178a21a3de5a9b12b17e14fb64d0c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2653fa4b0f1385c5c951dc5ddd52830abc7a2278 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db327045d60a9c8385649036a35da5c2a06bd9ef | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c8890ae39663dba16c15b03cb6fe33c8ddc06e4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d34a9ef56633cc7d7f569f25b9750f10e338349e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b70e0e5eb959b1f61594f108f1f5f26e9b2b1d1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e176dbd40c954513da822e35fed87d995385ee6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59b8e002fdab86af6b89d987301a11d0cb234f6b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c4730d9572eca11d000edd7f28bdef888e8ebbf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e3c4fe36d09bb822f3225dbb7ef5973fa77b6c0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78c311c85affdc6d4eadcb28b0199cec29844dc2 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a8d3cbc87394bfb2ee8a4999b366a9feba2f3a3 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eedb5603f2b727b8b1f8ce12d86df6775ffbbea6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6275cac149dd37fdc286fda294b1196d6438dc39 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c021e1d95b68731d2ea185a820963d40ea300755 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8afcdcf923ea1dd2f646017da19afb84dd9da21 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f867d576451d28a7641fcb48165ac37bcda12bcd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b763095c4b12ff63295f8475f180d5e8621e16e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/374e374b7c0aeb9fbea324255e19960aebc4d577 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e35d3df02de4b97b983d43a72a0a04bf49e450c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df09b0a166a77f5529d01e8da806cbbc4e394908 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b31cf19a8f9719e23fbfac3bd5613e96c73fc5b1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/826a40d75af95e9550198c4d9b080b64fdadcf8f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/21d26d31de91fdc1ad2b3d5e11420d403449dec8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a06462c58f98d58642378baeb44b55ce6bd4b59 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/617ff21bc9970c1a0d976b543a0e41285712980e | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30fca71a3fced4bc096b25b66eeb47622062cbf0 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/692b76c563df02a11502c0179bf8ccf7899dac24 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e68cb4dc4aefb1c41a665a0c89347ab921b77e13 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/218f0cdeeb8ba5a94f98373db3e995564196e300 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97a0524578278b2cb82dbfcd37bd569f65d91751 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e841df7c3fe15a419138140403264e32a29336c9 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d4e7d85c5ba0c9ccf3bab09f0fcce84c6256bd1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e9f3e445c0a70411d77d823b5119f82e864e918a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bbcf7b0f7324c7d0794b37983c1cdf9362e9019a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b989820e6c63e89305349eb446f79f7bcccda86e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6cadacd38dcac83a5a20e401136494d41582e081 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3efee6a90abdbaef9b4c5e624421bd8c1115fe8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/948175dc456c133f3f3b6342fde8a28249ae3355 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/544827d7bf1f476116037b03c672e8ea63838f0e | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9d750569d4e4f3084ffb475e389a11982acac17a | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/c3e44d1534aaef01bd7294d662121b8e658af7e6 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/951bb898894b9d25115e548c8db49661d803c2ea | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/0c05ea692a5ee969c8cf064a78158074c9945358 | powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6c3515f03de87a2daa0e63c52f93fac0b7dc982d | ORPH nios2 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/17be39d75eb23f084d1fa352e7a691642c19bf14 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/00ce82391fb9a99c0af5ecc829f340407fefffab | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/1f56b234f41d04e4a76e46fde7c28f03376d743b | m68k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/78d4d59d86a9e8288d751a6e491b983d4c8bb6ed | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/d63ae78a881b1b1ad0457f09525e11bc0abd8375 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/dd6bba1fe0294809a42204f2e4ef4917c64ef2e3 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b9055bf98222c04b00aee95e42c9edb1b25bfd67 | arceb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b2579c840218c575735a41ee8e646a9edc2efd08 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/992a363e66861443bc0d2298b3353996f3bd7d10 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7470e8613d338fb8677b58ea21a132fc79506ea7 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/48b18980d65bf2b465bf4a806b86549e043cbf92 | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/6fce8da5de4bd50cf6dd5493a3e294bc00f71379 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/99c3422d96919085ab33322b55a6b868a53edbfd | arceb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/22ed235d2095ba8bcec78a9959e479332d5258ca | x86_64 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/19d5f8dc8ecb17d145ba8cf0450162ee49afb785 | s390x | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/f9c28d90705b9c37dae5bba183058ae66114a054 | sh4 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/ddf6f0e862c8fb194733990187c38d2443f5670f | microblaze | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1bc77a6003128ff0d8e9602e6ae410c962e1b40e | ORPH mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1a625dc7f526743cf47fd2d21ceb648ed46dab25 | ORPH nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1792361072a6bebe36104ec33bb0800d21357773 | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/5e3213cae364b885a0cf292f10d6eaecd3016f1d | arc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d6e6816964f1e1c4af67805f9c6d0ebcd186dcf2 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b9ec30ca0c4cb53c82a366981c174c4ac66c1af6 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/dd849bb57a93eddcf2918415e362137ccc9591ab | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1e3c709345fcaf3ac042b58247e792714ebc97a1 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d3be15c230bd513ffd295c9d62d33f75673d981d | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3d2cf564cbe2a82207f54119d6efaeed2f844044 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b429b83a034ccb36bbc15460c9c790ed69598edd | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e7bcd099b3b22b5d8af528d6d7959f4bf73df3d2 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b81c2103cf3716a038acee1413f2be7b791e0cc7 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/63ea7e85de39393de93df2fa7af3fd15eff4d429 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0eb176fd19987719f9c4b541e3e9e2a0fc5f8094 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c4825d8f7f3648e740ea9720f70e7df98f1836d3 | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/becb5f326630cd38b777ae6168e090a534eb0b79 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c29c0852bb378a31691c765d9fb47b41782c1d9 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8bd70fc19709cedcab8fbaee53226bffdd242e58 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/679655c91ff98bcac5f5d95f0bb2a8a84e0062ab | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2ee1f1057c852e97c8bab157612bbd5ef2e2c5f8 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f915907e3e46e351116396a137416a6a6a312402 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f8d265c034b64211b9e42daffee5dc61873e2ba5 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3934065db4383493dda05388c9bffc24ea99f726 | aarch64_be | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/170377910ff0f2c0839222f47658477b0b8d09bd | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/dc62b4208dccadb0accb37cd5cb1eb7a07f6d8a7 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8ee2a4a0a7b85b74ca6abd5ba6b0a7d2d9befb0a | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/429bf0bfe138a2b82fc05438def3841160c7a57f | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/55503a7ecc586f8685dc7b70d9431bbf2649a5a4 | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f54be1dfa5e125a68d59e1404857f76cbf8f6c98 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cf04a8b5f8ffe05fc6b8c33c37723322d624353a | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7a1259f72a9ecd9c472fce38763f8da35fdb5d78 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/068bb0d70bf69c5d1ae4a125b6f28824f9244004 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/49d3f4d47987c0b30879ae6c7c89dce77dff385e | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3814f7aad7f88ba2b10d3d5c1a3f40e387adf21e | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/476b54da5651ff5e2707d8aec341991a206e1df5 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/65c3eee250dfe96a63399b80740b6029e336fb19 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/84d5c89b9273158d4a2d2af5a1de4b393c220484 | sh4a | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d4f11e2a3e2b6f33488ea7868fe3c3a44d2e0161 | arm | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/350633fd6dacac94626dcc02f3d02bc857bcc492 | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/fea8acb6b91b75fdbfdb3b8f89131f2a8e08e421 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/1f0dff590ab8a74afb01a5d47fe9af8ca2b5d3fa | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/99a3de307b5f2ad17a90f2c6190506d318022aa3 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0c71bbefa6ae6dab0368a212832d9e87f90d7838 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b999320784a887cf5b6eeeec304f3dbfeb081350 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b28ba8cee8f34c01449b8aae928ba8f2a8dbdc32 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/163dce29c4c36845f653511fcc56e870157a0fdd | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/31643a70fceb56ccc1f61882fdb495cdc0bb4d64 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/974c261d9cbc89c0ca0efdf384b0d6f3fb645dad | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/5d1358dfc6104c879f795fadd4b0072f45d28b46 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/fa4074531d80f481c17a660ec7b5cea8c9fceaae | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8bb07dfc4c8eecced8d5a324df78c90a30be2ce3 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/aabbfa9b87fe2e1bc6973b9e9ab45690bf58e78e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7de7d03c85f9d8bba9ae8989be85077418027b33 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2fc1c0b36b9a85325ccc34f25818f1fc09604802 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8b2541f441cb0b8145d343baeb68a88dc973d0a1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1d92365f32236c87510f7b2229b09bb91a36faab | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c58ce9aa08c0d6e73b4e0e0ef76ca90587f513a3 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f34d0b2ba916bbecc403e071b05a65610df56d0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/169285fa486f738caa99c5410ad88e46976b43a6 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30f9f2c97af7602e02e1e02d949bd09ade5e6999 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/33d04009087a19c691874b822380d29ca00dafca | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/97e0690d39ff26e9e5f1dbb7b98ac26a6ac7e926 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4834321a1a76668b72fdec9e2365c2eab3445e94 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/79667071e8e70a7301711b2b719c52572efcef9c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/103792787193df757f8ef26e368e6daebce4bb08 | microblazeel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c5575a8d1737797e40d5ebe4abe9778fd2295a39 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/963c93c2b2722b1787db153789e12c40768ea5e4 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e15e1116cdd9b2984557a46719060edeee196437 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d547f4a56adea235996fbfa8e5e169fecd888dde | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/11362eab42b287b15ac58ca49d403a0f77143d37 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/afd19d3bca199897f3718608d41917fb505d2db6 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/56d31062437807212378c59d6ac2bb2e38834c07 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/895eff27f0cca5f0750ec5105b8a50012a856a67 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/85870fd9c229997ea0ea15cb4d55e0eaa84979e4 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f094fdb4d52092c1e8bf4cb86d4e7a872a7b04b4 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/63d51256849a77aa558a90086d6b6b758becbe3e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c4e208526ed8293e53924b25fa9568fddb91122d | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b3ac0e5144f842e2c87e36d082b81d217bab3f32 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1fa5369b7e00696f5f0fc2aa1e3bab4f2bd648cc | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b3e6c70ed23bd0b25cc8ade866486e5a15b2012b | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f5980b31d7ffe34bbb4b7958988e5fffeb1243ef | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7fff97a51c235190346e3dda1cfc8a1931dc7771 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4353470bc355cdebc41929d6cc59ee0f4531a4a7 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0ae1269d5898b935822d9e0e472bb83df87ce873 | arceb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/8571af18dbd20ab11078f6c011f62a0f3fbbecab | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a70916f2ed1c3b17585020e95c7a756e8e794306 | powerpc | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6c3fd65e3f6203124ab65e74dfbcb981ac2eb46b | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6b8f35408c0fad9340ed977d844dabcceed3fe6e | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68c4b650abafe0745cb11033d2fcb683b7f1b90e | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3485ea66b8593d9288a655bea3216999ff79412b | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5f62cc39ac2229d9483c301a2551eb1ea78b6a8a | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ca89f2a60ab530d7c1d7b1f4f5b5caf82657b353 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/73a13a6d05b5062aaa499aaaec1993bdd1b01c89 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8091f11699a15e1a887faf45213bc33d1980bbe5 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1d00e2325bec9921b2c56bc6c802b9cff68954a9 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/115170a6e2372ae855626ee92c70cbefc7fce560 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f0dc9d0ea0db1a53c3033ea14be01f4acc7dc0e6 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1b19f4c2fa1e638314c43b9ec7fa109afab08263 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/b514cc7a35fd123d9ae0ec19540a9815293239e9 | ORPH i686 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/9d5dcf294bbb2fd77697abcafeaf703d8150e068 | ORPH x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/a81f0307166ee059806759a7a5d2160474ac1999 | ORPH powerpc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a74254b833031d04268bb721a094237da002c493 | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ac38635042367dfa0151ce6eb95bafc99a20fae9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fabea6656d939062f20e91f65db5a23a5e5e93d3 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/58c2d8c87c7af26660002db0d5a4049c57f9adf2 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/033bc1a31d61c811c1ce874c8e8b595e354a28c4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ab13d6d321e0d8a6defc1db66d6b1484aa6a0b64 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b0473b420085cb78930acf9842d7501775e119f3 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/548950cf220c872ae909239173837fc6f1e5d0b6 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/47843698a4fc274ce85bed881496363371d68c31 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/56a3aa30a7dec82aa76fbdb5e00eaec3d6c29db2 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cc3257984dd2e78b20bc4c667be8974d28f1b20 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/46dc621574b4f587a9f084511ab7010250e16081 | xtensa | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/f744b2c23b7199545c9ac40d3ba9b44fe074d36e | aarch64_be | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/aa925e9f747e0b750ede385fab21cb2fc67dd35e | xtensa | lcms2-2.13.1 | NOK | http://autobuild.buildroot.net/results/57a6c80642613e8a87a49340b96124ae3f803ab5 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5088a06433feab53f6b176d4eb8a160f93cb0cb4 | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/4ef2065ac93b8aab6228553020bbef8f9e5b73bd | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b75b9781364800bb8d4f5176d6bf26c22e15b769 | arc | libblockdev-2.26 | NOK | http://autobuild.buildroot.net/results/35d9f147c2674c1997b8b7c3897406a432e9dbac | ORPH or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4e8a6f7d894583d99fcd77db8f315355052a779c | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/c3113bbb00ab42736fae4b4d2301e23d3e1730c0 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/7156fc7ccf781583d44998f5bca42f25ba146cba | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/4509adef9b8149eed8835c834ee3a522a2ad40b0 | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/9a7b45941af6b09b77b5b22f3ec38c2e6fb0aca1 | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/ecbea4a0f053625c5c6a911b6d443e735cd32cb6 | arceb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/1381b1d04ddbd9e6af839bd25b1df87765442510 | or1k | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/4906827e9a1547c1b87ef60c5d9843b63488a2c7 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/02fccd2e4ceddb68873867d87c4076517cc44f5d | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/72d0a31f1047d19c39e0abfff30c4a5313c90150 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5569d69f4afeaa565b6e0010d3b565f80aff58bb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/216d79fcf3140bf468e87319ef41988b0b48c7cf | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cf8a88c0abfc048b3832f90231e05520c7a3e012 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0316b22587de8e3c0fc95b0259c56c53bd43c529 | mips | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/62fdc524e310a039c7f07fd518207a1ab79ee6a2 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2867263c7d1089045f06366f12ec36d067a88b91 | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/6670eaa3d78afa0ee130dad0096ad7089a9bef22 | microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/6a91c474dd9f14b7f2e8fc0324687a0af5a1e5e4 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d32e2b39f3d1d50b9ee0a14f9ec21e3eb518b083 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3ebee4e9bc5236479efd30f2933acf074f095e3d | mips64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/254c5d927b5978a432c4dbb6377dbb79e8eaa27f | nios2 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/63aa843844bb798934582e041e37dac411f40cc3 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/2607800b5afb950e319a0bacf3f013540e751e6f | sparc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/dafd433ae91d709dfebbee08cb73a2cae8e10f61 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d26145ce9418aecbe6795859d3d62dea77893497 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/7b8db14f997d7e079472258235098ad39aab0deb | armeb | libunwind-1.6.2 | NOK | http://autobuild.buildroot.net/results/7463c551f6b0a4569fe9583a19f19cc78646b423 | ORPH aarch64 | libusb-1.0.26 | NOK | http://autobuild.buildroot.net/results/7da1c277331ce6713e49e1f823c5436d09dfcc43 | powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/e84806615e2034d66c27884dd1cc4a129565faba | ORPH riscv32 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/f2b315a0a8cb0024ec36ca4cf807740e1b72cdd1 | ORPH arm | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/a3fd29582a7dba804bb87616439a376ca02ffcd2 | ORPH microblaze | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3cb2f96086ea52721b4dea49bca937eaf46d1888 | ORPH mips64el | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/5ade8ce9fbd24e03657ca86c6e8e314366240e3b | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bfe6a9cc14fc306ca3755521a45904f548aa01a0 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/9d9002be2939f5c9eea0827667c10bf758cbceb6 | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e505e73249163c58ce51fad04acbc5720649bc95 | ORPH s390x | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e06763109d78afe53f8dbf601f7259de4474e94a | ORPH microblazeel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/54817f8698a1c414dd9fd3a1925cc4c86c63c180 | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/6ae052ad5c39c5dea312d71844e065bc217726b6 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/fc3c14578067c558c899aa2a89122d4697c3abff | ORPH mips64el | linux-6.0 | NOK | http://autobuild.buildroot.net/results/ff117758d41b5d6c71afe5feb8c26610f838b1ef | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/0b5a520db98d231fd6512224ad5e094e750c9440 | ORPH arc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/99c233d13838c8319116837f180494b815684563 | ORPH m68k | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cd7b16b7e2a66ec2fda581ac215c9d778e3aaeb | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bc057b8b4591eb2d9f6b6c55c49edcab7a3facad | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7de742aa9716c6c12f49df47885cb8cc30556599 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e2cb14643e60f7049af520216167f1cdd74b3887 | ORPH nios2 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c89ff6d4e12ae067b2ef9a6413cb1e68b1f72483 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/ffa007ac704c4eb1bbbee603dd484550c7be5be3 | ORPH microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/36d90ef4f78d0d2e54882238f062bf7dc208130f | arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/2da71961d10d7de8d7ae0cb4c7aec0d1dd804792 | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/a030b169ac419186353eff2ee342c0a4b56dff8a | ORPH sparc64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/dd2e5033c3eb466927ca5646fda548c7edc70951 | i686 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/85a465434a7d26e520fbffaf140c2ce83bdc145f | armeb | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/b28fabc701516a6623e80950fdbb8a0036d4877b | armeb | luaossl-20220711-0 | NOK | http://autobuild.buildroot.net/results/63c71b8013701ada706e85fbfc7992eac206871c | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/18521c51cfd8bcec6f2991fba28f88b8e74fb662 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/c86492d5ae8a7e37620b113b007864153a1972ab | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/08d0009332a3de44821db523d27cd376b2a84572 | microblazeel | lz4-1.9.3 | NOK | http://autobuild.buildroot.net/results/588c740a2343631fbbeb7ecdf9177816cece3d33 | ORPH x86_64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/ad03a76cfce107306822514d4b3e6fe7e378db3f | powerpc64le | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/51610bf7d656e110d438b770c09ee65698c45586 | ORPH s390x | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/c010faa04a32e009973c62a0ed793694f4a4d29f | ORPH arm | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/e072d325555934860d154e1ad07b28ad4b9f78ce | sparc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/ee3b6f08cb431d708dd09084528721cae3e84ae7 | sh4 | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/c64ea869dd9513ea9694c480bd21e9bcc1c94790 | mipsel | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/a61e7a958330985f4d76b119d0cb4014cdfb1e47 | i686 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/93832e815be755c4640b871455817b9ba7693c5f | mips64el | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/36f37b7655099cec379004b30b0e09bce5cc0ed1 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/ae676eed49e2defd45577aeff3af2a88c0ac00a3 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/45882b967fb664f27e71b0c604a2c7ce6d0be853 | m68k | mpv-0.33.1 | NOK | http://autobuild.buildroot.net/results/fc45b97769b68ed46b29932586008b9ff6703983 | microblazeel | musepack-r475 | NOK | http://autobuild.buildroot.net/results/09bddab8959b787e8a6832bbddf882ea66e7c55f | ORPH sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/dea3cfd1237d2e27c623d0a1f3049e734cc85a3c | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5a666d0a3159c7806e237f2cd47fe743a832c01b | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/be40cb1003e90c9dfd0d2e20880c12ef4a5480d4 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/acec234955d06ed6492ef6aeb50a94f69431019e | or1k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/a569b1cbf955ea59fc3694a07f3fff5ff0f1f82d | aarch64 | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/1a993980d35d542e216484792a700c7e70e80a1b | riscv64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/e9c1372b6cbfbead15784ba4c4ea57c84a4b1ee4 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/bc9b745fe4cfdf7a802dce2001d5e6b0746c8b0e | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/2a3f2a17b8ef244c4f22beb2130102d2486f7a40 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/85ad4df1dfc89df2e6a14d9c972b54d0706e63e8 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/a55c891fea888b11be00000b4aca4320579337c3 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/14200f15d35ebbba1f3bd92465a360a16603394a | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1e08bc66b9dc04538f739e7c268124250b210164 | ORPH x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/18880b7608f521d0c2f4976ec40cf8e0fe36a2f0 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4074429b0bb76e981dd24c6f761a5b6d3270fa0d | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/62882f72d5eb0c4bc9dc72a72f6e40fd1749ab32 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/98016e2d037fad0c12ed30a5408553aa11c6ecf3 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/733a5d63ccec65f134cc411f017bff8cd24b78f6 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/d4496e69deb01fd89d927525f9ba100be520bed8 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/fa795afadc91e31aff04595f6c42542e36c5878a | ORPH mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5ea0155f055639ab334e0ad3733091e43e79f7ba | ORPH mipsel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/cb5ff1ce454c9e64f0648c5ae4bfa8e1bdd9822f | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c1d904dc8b82f20ebbc6bbedf8bd7089b703983a | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/b38441875e524e56fa5b0de0871d0f0d77eb8cfd | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/0e8d6cd228650a9ce31f505c55a21b72fb45b53b | ORPH powerpc64le | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/9eb7db8f566600737029da29efd81c8b1c139539 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/0a806139e0d9d9e99e1d2e8fd4024dc1dced1eb6 | ORPH riscv32 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/7b86aedbd2cbfe3fca800db52d26a396ea4ea205 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/aa47d0cb1eaeef66bece6a969c5abce44a6c7197 | ORPH mips64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/0ea38f80961ca0380eb8257cf395050b02bca707 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4125ee91030495c808a251cd0dd2734956e69055 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/01e8ee531ce7e1c904abefc39f0b32d12c674a87 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/860f9e74ae35abec9bdf1047174376c69e303f5a | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/774020388252834e97c62171f7bc2de062ad022c | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/401061f9b9a0ae792d9c3e053b9f8303f82ae343 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c413142bd1e7c15c47ee82ebf1f5a67835c5e174 | arm | python-pycryptodomex-3.15.0 | NOK | http://autobuild.buildroot.net/results/3c5b09967f6fd2e46370f32ed96684f65448315e | sh4eb | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/5339b043db8d9c58e95df8445e66246ddb7a2789 | microblaze | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5 | microblaze | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/74c561c2c7acf1780ce408de6d3c7575672b95b7 | ORPH riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/7f6377934022e9a9935a783584b121b7462a60cc | ORPH arceb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d537a74269132868034beef59995ee5fe90a315c | ORPH arm | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/750f279dec4b00705e6ffe403b846fb91824f440 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/91d4cde241cc6ba20a47f32b01dbcaa682006753 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/546b0560cd759b137d6a9228cc95acb7756efd29 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8d60e592184c73307ddb26793f05638d242760b7 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f29807f5757cea192914ff1a5e9d9defa61b4ddd | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6d75b3249e7df1ac6b891a6aa0126973f52869dd | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/15644ebb1a0007ff963e0de02fb87a4d5a26c5b0 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022e51a0054993f79b8d588f5ae4a70d6e84aca8 | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6e1cb720e1083459354a02d7800f5ad4778d838a | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0c256070bd92e43f8c97728d18c0f2d4c855a825 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6028caaa0ecc5a67dd6bd1d6754d9d205976d33a | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8c3683e2232afdfb95e9fed97b8463b8fd003eee | ORPH arc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/f5af842495d6001e82265f8d51b818d7e8a889d8 | ORPH armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cd7386ad261a751df1f7b7bf75b2442e9576f817 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/515b2540cde05e9cb8ab168983ac11a90d700921 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/70877b55aacbdb0a09db2a56b0965179a2315157 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/af69d430c1a696d7f954441c384479e2ebc22add | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/34619f5bbab6edbaf7099f2bdc6fa68b1f800372 | ORPH sh4eb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/16848baf9b2f41aa684c663ea4332036db6c8c52 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c6b2a57af44a9eb0a4d51794b9bcf7af785b294f | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/72911e1f77ce154aa345d467520d0b33fa020628 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7c0edbb0eed1d95d11667a51c3b8e35d982e546c | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e02c7ff7fd40c841f69dfa1b279b882cfff8a365 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9d34f45817f997ddb9aeec2425fe11e8f3380c46 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/88bdffc6a4adf8d6ca93d7f2d71aec0c179512f7 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a4d09910e0d21dd6a5f0cebe9e53968ecc78023e | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/2a5a4f843e2bd72ace6288f909e95a2996d1446a | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5ba1a68cb3594fe8069166024c9d3891672a02f2 | ORPH x86_64 | trinity-1.9 | NOK | http://autobuild.buildroot.net/results/04d0f5b9fc40b4850a7b438152caa90bfb62e661 | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/306c18ded68950b97656283f4fcb5ace633e2a9c | powerpc | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/52270c52561dfc343e3dd428cc1228de9292c0b3 | mips64el | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/45de34e241694439ff66328ec1b2b98f6ad4e1c3 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/e80f3ee1540f4291db7fcd21d1d737a551bcc91b | arceb | unknown | NOK | http://autobuild.buildroot.net/results/70bb84515cbabfb85834111db75fceea8e592ea8 | sh4aeb | unknown | NOK | http://autobuild.buildroot.net/results/740915478f5141aed766417dcb8219a9f95d48de | sparc | unrar-6.1.7 | NOK | http://autobuild.buildroot.net/results/9da55491d984eeebe9ecc8ad117b03afd3058d80 | ORPH sparc | v4l2loopback-0.12.7 | NOK | http://autobuild.buildroot.net/results/c8787e4eb75b818f40c7ca756ece0367e2aea101 | powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/7f288236588bec42e2fac5e60a02e844eadbbd89 | ORPH riscv64 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/ee4e06291eb3161371be363f18f7a7593fd6ca40 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/5aa7f58c681bfdd9d774f759b4f166a52fe74ea5 | mips64el | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/f482d03db20d746d3563ccc4ec7cd99d67b8d4ce | powerpc64le | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/e58cb3eee21a7e3b1380022627bea3d6062a77e5 | powerpc64le | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/e541354db0f6cc626aee09658e6b12a1066bc4a0 | aarch64_be | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/1a994992d202cf698e52d94e148dc340e994b8a0 | powerpc | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/4c2a368e8d706031866b5d1d1417b482500b9804 | microblazeel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/40160215d1c57dffb2f3b91c24f0f0969800dfcf | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/8fb753f7491b9c8a03ae76cfa493131bf0577ae8 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/77bf9aeb25d8d6f29dd4997119474ab02aee75db | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/8e76830007922dfad1b6bee3ead14235f25211b1 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/6df1760b70faa9b163d458866efb876771031c20 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 3 rabbitmq-server-3.8.2 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0881ba59289dabb3bb9df7c7e4e6da65b6485e64 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/53e8a60f3f5bcba2d49e94dfbba1e0c23bc6891b | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/471bbaff87b31a40e0324038caf76a11822dcaa7 | aarch64 | rabbitmq-server-3.8.2 | NOK | http://autobuild.buildroot.net/results/31354e0cb9891144f882fa2cd5df10ed20e924ab | Classification of failures by reason for 2022.05.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 3 igd2-for-linux-2.1 | 2 dash-0.5.11.5 | 1 erofs-utils-1.4 | 1 libgcrypt-1.10.1 | 1 libmad-0.15.1b | 1 libvorbis-1.3.7 | 1 lpc32xxcdl-2.11 | 1 perl-5.34.1 | 1 protobuf-3.20.1 | 1 tinifier-3.4.0 | 1 unknown | 1 xenomai | 1 Detail of failures for 2022.05.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e7af5d38c4343ba403c3982e7b489a18273deb5 | ORPH or1k | erofs-utils-1.4 | NOK | http://autobuild.buildroot.net/results/384ea9c1450656e8a029592f814f6e02d3e2cf5b | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/eccc1c0f3ccc19fb806d2ea8f41f58a3c6422f19 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/575bdf2f48db9ce25aa3e6bca07aebf34830b8d8 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2f7ca6bf32f204a0a37a9b6068d26c5a5286b9de | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/786ee85f0b439473d6bd3880e00e5d96a7998f23 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6ddd2e94cc2cde1af29e5f40f6df583e1efce074 | i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/2c1bdb615306c66b2cde5a1eae71143fc98774cc | ORPH armeb | libmad-0.15.1b | NOK | http://autobuild.buildroot.net/results/1dd7d897b6e802dbfc2f37232a9f8f4558b0f6aa | ORPH powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/b287e339821589ec41cc960f064c05af9097c20b | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/4821b8600c6be7bebf5e4d5f413e7a013f04c4e5 | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4daa082141c94b6a6e4ff3abd132f58bc8de9459 | nios2 | protobuf-3.20.1 | NOK | http://autobuild.buildroot.net/results/7158b73e168c1a7d8eb0a12be78f2b421904f9f8 | powerpc64le | tinifier-3.4.0 | NOK | http://autobuild.buildroot.net/results/f60a0b562dde9320efe97e75ba0226a55f24fb73 | powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/73f4619ec0575eda767f68bd18949dd328357e59 | sparc64 | xenomai | NOK | http://autobuild.buildroot.net/results/9b5faab1d091a9a991741cc272b131062ce126ab | Classification of failures by reason for 2022.08.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 gerbera-1.10.0 | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 linux-5.10.109-cip5-rt4 | 1 linux-5.17.15 | 1 toolchain-external-codescap... | 1 unknown | 1 wavemon-0.9.4 | 1 wolfssl-5.5.0 | 1 xvisor-0.3.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/546987f4970b8fd58d22ac97c765a3793a4bed6e | s390x | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cfa418652a857c4f541c9cbdbc14b6a49667f56c | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1effbcfbcf7b1b089614dd8b09e50b475763f80a | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/80c474debe0b3dc652c68e82b94ca5a05d7671ab | ORPH arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7fab0d4f9dabba28828b052127642ec230601d9c | mips | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/2ad23a2939fb8225b48e36d789bdaf8f99854e8d | ORPH mips | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/d672ea875fd1054c0e2daaa8015d033012d252d4 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c1c1e6ef6693e1381e01e28df678079f570ce519 | ORPH aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/d68d5a9c78a01ba37559a8999f11f8a53f092225 | aarch64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/8720b1ea254ea92b846b4bf0452bc1bcc6dd8d43 | ORPH riscv32 | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/ee6ad1a96fecbd30cea1870635c7e483fc24fc1c | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/cf9d2dd70c42fe32a22345a0485b3e37dd62558e | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r8 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.0 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.31 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 5.19.1 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | checksec | DISTRO | https://release-monitoring.org/project/17677 | 2.5.0 | 2.6.0 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.2 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.5.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.22 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.0 | ell | DISTRO | https://release-monitoring.org/project/17781 | 0.49 | 0.53 | ORPH empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.19 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.28 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.5 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.15 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.5.8 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.33 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.13 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.33 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fluidsynth | DISTRO | https://release-monitoring.org/project/10437 | 2.2.9 | 2.3.0 | fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeipmi | DISTRO | https://release-monitoring.org/project/00848 | 1.6.9 | 1.6.10 | freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 3.92.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gesftpserver | DISTRO | https://release-monitoring.org/project/59393 | 1 | 2 | ORPH gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.0 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gmrender-resurrect | DISTRO | https://release-monitoring.org/project/21445 | 0.0.9 | 0.1 | gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gnutls | DISTRO | https://release-monitoring.org/project/01221 | 3.7.7 | 3.7.8 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.0.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.3 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.3 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.3 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.3 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.3 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.3 | 1.21.1 | ORPH gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.3 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.3 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.3 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hdparm | DISTRO | https://release-monitoring.org/project/01304 | 9.63 | 9.65 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-50 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | isl | DISTRO | https://release-monitoring.org/project/13286 | 0.24 | 0.25 | ORPH iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | iwd | DISTRO | https://release-monitoring.org/project/18380 | 1.25 | 1.30 | ORPH jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.24.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdnet | DISTRO | https://release-monitoring.org/project/06308 | 1.14 | 1.16.1 | ORPH libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.15 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmaxminddb | DISTRO | https://release-monitoring.org/project/07470 | 1.6.0 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.11 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.0 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libva | DISTRO | https://release-monitoring.org/project/01752 | 2.15.0 | 2.16.0 | libva-utils | DISTRO | https://release-monitoring.org/project/16334 | 2.15.0 | 2.16.0 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20220913 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lrzip | DISTRO | https://release-monitoring.org/project/01842 | 0.641 | 0.651 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | micropython | DISTRO | https://release-monitoring.org/project/10539 | 1.19 | 1.19.1 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.185 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.10.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 515.76 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+18 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openssh | DISTRO | https://release-monitoring.org/project/02565 | 9.0p1 | 9.1p1 | ORPH openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.30 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004003 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.78 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.39 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.27 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.13 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.0.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.18.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.89 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.89 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.0a2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.28 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.14.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 2.8.7 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.2.2 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 2.5.3 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 24.0.1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.2 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.10 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.4.1 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 1.4.41 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.0 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.2 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2 | DISTRO | https://release-monitoring.org/project/04779 | 2.24.0 | 2.24.1 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | syslog-ng | DISTRO | https://release-monitoring.org/project/04930 | 3.37.1 | 3.38.1 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.0 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0453 | 9.0.0701 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.40 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.230 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.18 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 373 | ORPH xz | DISTRO | https://release-monitoring.org/project/05277 | 5.2.5 | 5.2.7 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.05.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 bind | CVE-2022-2795 | https://security-tracker.debian.org/tracker/CVE-2022-2795 bind | CVE-2022-3080 | https://security-tracker.debian.org/tracker/CVE-2022-3080 bind | CVE-2022-38177 | https://security-tracker.debian.org/tracker/CVE-2022-38177 bind | CVE-2022-38178 | https://security-tracker.debian.org/tracker/CVE-2022-38178 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 darkhttpd | CVE-2020-25691 | https://security-tracker.debian.org/tracker/CVE-2020-25691 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dnsmasq | CVE-2021-45951 | https://security-tracker.debian.org/tracker/CVE-2021-45951 dnsmasq | CVE-2021-45952 | https://security-tracker.debian.org/tracker/CVE-2021-45952 dnsmasq | CVE-2021-45953 | https://security-tracker.debian.org/tracker/CVE-2021-45953 dnsmasq | CVE-2021-45954 | https://security-tracker.debian.org/tracker/CVE-2021-45954 dnsmasq | CVE-2021-45955 | https://security-tracker.debian.org/tracker/CVE-2021-45955 dnsmasq | CVE-2021-45956 | https://security-tracker.debian.org/tracker/CVE-2021-45956 dnsmasq | CVE-2021-45957 | https://security-tracker.debian.org/tracker/CVE-2021-45957 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nodejs | CVE-2022-32212 | https://security-tracker.debian.org/tracker/CVE-2022-32212 nodejs | CVE-2022-32213 | https://security-tracker.debian.org/tracker/CVE-2022-32213 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3234 | https://security-tracker.debian.org/tracker/CVE-2022-3234 vim | CVE-2022-3235 | https://security-tracker.debian.org/tracker/CVE-2022-3235 vim | CVE-2022-3256 | https://security-tracker.debian.org/tracker/CVE-2022-3256 vim | CVE-2022-3278 | https://security-tracker.debian.org/tracker/CVE-2022-3278 vim | CVE-2022-3296 | https://security-tracker.debian.org/tracker/CVE-2022-3296 vim | CVE-2022-3297 | https://security-tracker.debian.org/tracker/CVE-2022-3297 vim | CVE-2022-3324 | https://security-tracker.debian.org/tracker/CVE-2022-3324 vim | CVE-2022-3352 | https://security-tracker.debian.org/tracker/CVE-2022-3352 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 wolfssl | CVE-2022-39173 | https://security-tracker.debian.org/tracker/CVE-2022-39173 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From giulio.benetti at benettiengineering.com Mon Oct 10 18:11:48 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 10 Oct 2022 20:11:48 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.0 Message-ID: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..3582de2f30 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 a05e19e3f52da24ed071522f0fddf872157d7d25e869cfd156cd6f1e81c42152 harfbuzz-5.3.0.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..8ef41d3952 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.0 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 10 18:13:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 10 Oct 2022 20:13:25 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.2.0 In-Reply-To: <20220918000859.837023-1-giulio.benetti@benettiengineering.com> References: <20220918000859.837023-1-giulio.benetti@benettiengineering.com> Message-ID: <120fd0f6-2ea1-d80a-1126-d1498ef9d35d@benettiengineering.com> Hi All, please drop this patch in favor of this: https://patchwork.ozlabs.org/project/buildroot/patch/20221010181148.18858-1-giulio.benetti at benettiengineering.com/ that bumps to version 5.3.0 that's been released in the meanwhile. Best regards -- Giulio Benetti Benetti Engineering sas On 18/09/22 02:08, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash > index 9ec5c63f55..0d55c15f79 100644 > --- a/package/harfbuzz/harfbuzz.hash > +++ b/package/harfbuzz/harfbuzz.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz > +sha256 735a94917b47936575acb4d4fa7e7986522f8a89527e4635721474dee2bc942c harfbuzz-5.2.0.tar.xz > sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING > diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk > index 75d55106ea..15a58c4bf4 100644 > --- a/package/harfbuzz/harfbuzz.mk > +++ b/package/harfbuzz/harfbuzz.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -HARFBUZZ_VERSION = 5.1.0 > +HARFBUZZ_VERSION = 5.2.0 > HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) > HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz > HARFBUZZ_LICENSE = MIT, ISC (ucdn library) From thomas.petazzoni at bootlin.com Tue Oct 11 05:45:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 11 Oct 2022 05:45:43 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-10 Message-ID: <20221011054550.0723E409E7@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-10 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 1 | 0 | 7 | 2022.08.x | 14 | 13 | 0 | 27 | master | 109 | 819 | 8 | 936 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 371 host-gcc-initial-11.3.0 | 47 berkeleydb-5.3.28 | 24 ca-certificates-20211016 | 23 host-f2fs-tools-1.15.0 | 21 slang-2.3.2 | 20 bearssl-0.6 | 18 host-binutils-2.38 | 11 host-sentry-cli-1.59.0 | 11 igd2-for-linux-2.1 | 11 coremark-pro-1.1.2743 | 10 host-gcc-final-11.3.0 | 10 libnss-3.83 | 9 crun-1.5 | 8 fbset-2.1 | 8 brltty | 7 gpm-1.20.7 | 7 host-gcc-initial-10.4.0 | 7 btrfs-progs-5.16.2 | 6 dieharder-3.31.1 | 6 host-binutils-2.37 | 6 systemd-250.4 | 6 autofs-5.1.8 | 5 frotz-2.54 | 5 host-gcc-initial-12.2.0 | 5 host-riscv-isa-sim-1.1.0 | 5 libarchive-3.6.1 | 5 libglib2-2.72.3 | 5 efivar-38 | 4 gerbera-1.10.0 | 4 host-binutils-2.39 | 4 host-go-1.19.1 | 4 linux-6.0 | 4 ocf-linux-20171122 | 4 unknown | 4 apcupsd-3.14.14 | 3 dahdi-linux-5c840cf43838e06... | 3 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 host-pahole-73383b3a39afe86... | 3 host-rust-1.64.0 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musl-1.2.3 | 3 sdl-1.2.15 | 3 gobject-introspection-1.72.0 | 2 hans-1.0 | 2 host-berkeleydb-5.3.28 | 2 host-delve-1.8.0 | 2 host-vde2-2.3.2 | 2 jhead-3.06.0.1 | 2 libcap-ng-0.8.3 | 2 libee-0.4.1 | 2 lxc-4.0.12 | 2 memcached-1.6.16 | 2 musepack-r475 | 2 netsurf-3.10 | 2 open62541-v1.3.3 | 2 openpgm-5-3-128 | 2 perl-5.34.1 | 2 toolchain-external-codescap... | 2 tstools-08f6be304040e7b8476... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.5 | 1 asterisk-16.25.2 | 1 bluez5_utils-5.65 | 1 bullet-3.21 | 1 coremark-1.01 | 1 cryptodev-linux-1.12 | 1 dash-0.5.11.5 | 1 dtbocfg-0.0.9 | 1 f2fs-tools-1.15.0 | 1 flite-2.2 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gdb-11.2 | 1 gensio-2.5.5 | 1 gmrender-resurrect-0.0.9 | 1 gobject-introspection | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 kexec-2.0.25 | 1 lcdproc-0.5.9 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libmdbx-0.11.11 | 1 libostree-2022.6 | 1 libuci-4b3db1179747b6a67790... | 1 linux-5.10.145-cip17-rt7 | 1 mesa3d-22.1.6 | 1 nanocom-1.0 | 1 netsniff-ng-0.6.8 | 1 ntp-4.2.8p15 | 1 olsr-0.9.8 | 1 openssh-9.0p1 | 1 openvmtools-11.3.5-18557794 | 1 perl-net-ssleay-1.85 | 1 python3-3.10.7 | 1 qt5base-2ffb7ad8a1079a0444b... | 1 rauc-1.8 | 1 s6-portable-utils-2.2.3.2 | 1 sconeserver-8d1935919a20133... | 1 scrypt-1.3.1 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 skalibs-2.10.0.3 | 1 sslh-1.22c | 1 stress-ng-0.13.05 | 1 sysvinit-2.99 | 1 tealdeer-1.5.0 | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 valgrind-3.19.0 | 1 vde2-2.3.2 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/570c68fc8406c34277b9f5d387d98fc7fd35e5c4 | powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/381b632efdeb7158edddbf0e1ff436ddae452dff | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/e7353a7688bce016b5c1faec2e28ceea9f4fe77e | ORPH arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/f214a4b71c44bec8e772bc8863fde2d7d51658eb | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/3ff3ed4dcbcf2d5be8e984730610c03056d70208 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/8087848f97cbfff8f29dfbf7b8f32a73e32b1cec | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/263ebbbb9d165fc64527989c2f8876150087e218 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/00d353cb8a1af5d78e3e11d6fd051c95a1688d1d | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/51944714e39f42b053a014d230744ab75594ed88 | ORPH x86_64 | asterisk-16.25.2 | NOK | http://autobuild.buildroot.net/results/4c2dbfef776d17a13216e6a7bfdea64fa65afc09 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e1f4a35c3c020dc0c7546fda599ba1677805d589 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cc8c02d55a34b652a8a705500ec8c8098ccbb2c2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3f8f802803452c7003af5aa07697f973107ead50 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/632801349c8105fe5cf915d7a40b0c98eeed1b04 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/77210a433cca40fdcc52133602d6147263e47dc3 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3ceb7feda0013376d255e104656a80ec3372bbc0 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/064a814466a3ae23b07f99972110425dbbc20b3f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/10343f0b0ad22478d0f8bd5215409607eb3d8f25 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c3ecde2e89269a621bf5be1579d5a460c0f5174e | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a462cddf584968e9f85f9f28dbef206a2cb425a5 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1789e2eaa07b89eb9a182c7ddbe0cf9ec009dd7f | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5d78e32a52d5faf32933d47f3d905730d7a43d88 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f7652244ea5dfd523e481c699f6d9ce14d95985 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/caf348adcbb545ac1d479311f205340017ae83b5 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f715d1a284ccc641c7a4d7f61a619a700f10c6fc | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8d874c911f485d882c40930e4beb427f5e538cd0 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/739d1566e1e5033b852c6c776772c782e4d841b0 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/397756e22de2a53a878ca785893e44f9e3492c03 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ba32a356977c776bc0dc0cc029ed5e56aac912f | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9c5e775bccdf7ec38badc34b09660d47d0ef7ca6 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/27fdfa322dd639216421c807ac0ef8fe06ec65e8 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2c1e7f458d71557912719e5a78d667d42120ac27 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6142d05563eea08dee880e6ee1385324955d4e4e | sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e3c4b17a0d9d8a0fc356515cf2d62f43e4555476 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d8490d35cf6f8d26d891e289c470a5c4620754f3 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f206a49e88e63ca9c997cfd5dd468dfd820ad44b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/51e1d32fc8a34605e8aab24bc92e21b95b609a4d | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/41c8c162439c7ea5aeaa897780045089e4e37a7b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/af674f42e51a050ae8b4c6bd4a85b7632eba5012 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f2fa34ebb1c31c3dd87dd6aed121ab6091d46f56 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e1a2a1b913d7669d15d01adaa762c6027220ee6c | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3668a78565cf3c4b29589b7148b1c833e8d52744 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9a3008a5eaf92f9f764ba5e35cc0278ff87f58ec | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f4fe7651f9d17ddf36ef262f5d4a5b62fe3e0efe | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b8511d78da06c6529ba8037730e7296da54770b1 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4e38a59c1af2579ed57cbbbc072b3ffdf961bf56 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/397c4c672adc70401158c408b8902ee4cd5eae0e | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9986fc168345ee6bf8e2f605c4a7fd4cb033d28d | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a3a2ab8e21bcecc922f03aeeb4dd9c1b32ce3d9f | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4dc72999c0371b4dc96ebaaed50f6459cad12d2f | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/61b0eb59c731ff0ba3bb2e48a38b3956a97d72dd | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f97f47d5633758e5be97982e53c288386f63a4cc | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/32cf75e615a03677de0dc533735edbaab4662ac6 | ORPH sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6a74f6765801a9a75ccc312d634f6dec96f13ff1 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8c56e6e11d6eaefb4df33f84ff6b4a537d4c729b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a0d93ffec9500066fe373d5acab401a7fb26fddb | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fdf02ec42c3030054d5e1d4318673dd902d64824 | ORPH sh4 | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/2bdcee47f9bf66fa27a54e7d1db025ba62a94655 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/fc0008b4ca36be6fde4e87e0499d465598f53f3f | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/5faa6b857dea70f7d1b69bab6d96860631c86cc7 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/96964810631bc24bf80ab4480c77a07a30f32704 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/7a85208a485971659939f919c676483db291c03a | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/ac6b6102e62935ca11437fd633c8a0039f0d2eb3 | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/f5b46344217a389b8a13d31ff403460fe46b6a2b | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/8f25d204f3234c632d74183837ec5443419f6b80 | or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/36a94c0f4572e2fb353ba3527c653509e63e1b10 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0a554292a3fa5b7d86c1eb5945422621bc231933 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f041a29fbd9d792b47eea5ab20056281f9f31c3d | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/38667bf6441df96259ac1bc660393f538e5b7c7a | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/32b103990ed5ab7725f73c810cabf380698a6e33 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/218f2a14ede960b0308446d97b08df7a57bdad8f | ORPH mips64 | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/3ed3aa67ca2fd2a9d6e452d9ac84f5ba2f17b626 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c5c275cc392d0974d06e38cbade2fcd6108251a | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0b0f92acaf0cde1356020700e477510a53fa5601 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/cc3db5505ba27cef6f3acf36a6d9de67cfc55625 | x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1cd870b651e00802cb52671e54a0b4e995bd86de | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d79d745b1dcac868559fc5fac4bb9cd24d14b08c | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9ebc803bab004184c4477540546448e212766443 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2562859e08fbc39dad83a87ef609b976be93fda0 | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/20fed817b805b31d4ed0f7063dbc1051d0ffa2b5 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1db2b7b1d81802d343c35de6ef103a9dca113e33 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/49b4a55e41a11cb281da07622566a45082725158 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3a6be339282ff47d4b8b716b44d8042d5147cf3e | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5f8d43e364f706165da146b25191d26117679f97 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f8f48479532492508d535469f939248cbb9b5f6d | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/177269a8f55259e4e2c9dc69711505f863effd8a | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a3ea3db2ba4a0ecae1666513ad9de94474f8eeba | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f2ce1e6552383b5d1d59ed8415adf8d5f02affa5 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22f69a960a2af1139bf6a90ba6d14a1fae6987a5 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ba7db5c11a13198f9705f74c614354bee14d56ce | i686 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/16f101b411e52e61e7484162e2367750d002db3e | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f405352f7dcfa56480300567ec69d4382b013632 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/672dfcbed7d7cf68cc33ba2beacd2ef68fc6f3b4 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5783f372b67f4fbaf436c64fb342931105928471 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7f828486a52a4ca6fda5320f92f752478c6de177 | arm | coremark-1.01 | NOK | http://autobuild.buildroot.net/results/bafb30199ea58a22b9b7ce8d01e51eb43c54d0ab | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cc2d0aff82b35ce906bf718ea0d9734d3a5c2083 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d2e572c12458730a2a053269d1d076790be6ca94 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b3174e3c6e1a8ad4f70ce1ca7f82fcea23ab5d47 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5ba0821bd8742b805f134d8df6b16f9f2107785f | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d5ceb88c4d48f4474f4458ad5f69d2329fa76301 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c170ca0cd47fe91150a74891283999599791e1d6 | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a073c30f418f5a1f5f4ddebac4c222f4299297fe | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/57c771499768be9715734c66ac400517830b782f | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8f516da3185c51377e7226bce0bb996592172368 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e66b18864be835e656594857a70e2970fe9c053d | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fa12d773a05c0172ca5cbba51f7cd61d2bb7f6fe | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/deb33579d1012f0112fecba03bb799ec87eb7609 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3c1721a45135ebcde712649d757c07106c9e1a0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/60c95d20d0c9d87449bc9ee7557f770d1d3f49d1 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/37af3b4a41f37075ef3c6d12bea9afd29f7f90f0 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07c22135e724a950c4bafd72d8be2ec0d8175501 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9d4ff6bc6c2529c474dcd1277a9e4a7d489fc7a8 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/adbb5e20305e08e948482ab5e66226b2c6208df8 | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/8ba19b1032baf8340633ced9ec9f10f9559bc1e6 | ORPH riscv32 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f77bd5978467d85f3bd8740e61fe3d8963c3881b | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/1e8a70371ed54abb88de588673c1ce418f171804 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5fec1e3b172c380fb5c5950aa0c8857f3647796e | mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/196ebfffff849d478033b704b73a2edb8a17ec4d | ORPH or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5092ae82574fbd6e15db7989a1b7c290006bf532 | riscv64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/c0d6122a77e38d6ed1524ed28db2f948afdd7ac3 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/b4b89920bc99bbf6cfaaf2df2e4b9659ca796cdc | riscv64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/31d90386f0d9b43381db3ac286bd12caf7273fef | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/435d082c53b4be0cc02ad0fbd835b66c03680588 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5000ad32e22e3f8842c462380bfb3506453a98c7 | sh4 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/d50ddb9d3275d7c0d5cdd384432fc2391d721f48 | ORPH arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99ff56377b4f129427e7b4057479a1711ecce475 | ORPH microblaze | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/b7f79b79add34250f778f0a64d05928a12eb926c | ORPH mips | dtbocfg-0.0.9 | NOK | http://autobuild.buildroot.net/results/9fd2144909dc5afadf86021b23e9ee5131e0c30a | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/ffeb07b7f2d82bf3337ef097180c63c4ebefddac | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/4e3d9e9b94bc6423259763be6015e9dd4df32dc5 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/f1fd0c2b21b325260f7a6685bc8aa84b96d8294a | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/48457b9eb48b6b25d95eee664b7f808ba5565d36 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e77150428a8b05283094c1bb14b1f0f6eda4aa3d | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/641c18be10bded2407e7e9a01266eca7815d3a72 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fb7a361ec586b9433bbed45f49a620d476b28284 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b9e522280bc5afc9eff351d8d35d90f19f87dceb | powerpc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/551107a72c23e36d8cfb51c485f9c68794eabc1a | ORPH mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/fefdda58e7b30b18a311e314755bcf6fe9313138 | ORPH armeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/adb15e2c489e44320f9f042df342bd9258f156ac | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/db62e9c35ec508fe80708721741498243f13db9e | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5e451e771cc6eac0158d9748d3615641f85e67a4 | ORPH mips64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b325604a888ccee75188d9ef35efbaba762479c6 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/a4f8f8a1d5130baf6d5d901bcb8a0bdab6bffbd9 | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/747dd692497aee009bcfd338924ef3065a125e4b | ORPH aarch64_be | flite-2.2 | NOK | http://autobuild.buildroot.net/results/d8d74e51ad5355a3f57e4d2dea0df5d7fed2006b | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/089c5d4d209436a79f508b2cf836ef9eed8190d1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/5cdb8ebd95ecfb7fbb8596b5e68f25a3027c1588 | mips64el | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/29d4b50ef039c3b2ec8305b7e32ec73e81ee2c66 | sh4eb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/2e105f9e4ffef4690fe6999f32e773d7e57d3900 | m68k | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/785f487a83739d65da294f68de066056c84a83ec | aarch64_be | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/1c7beebaafe008dd6fd70de8a13e26061b996c23 | arc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/645f4e5e9aa3d175890d5d7154d6788ca4ff4dc4 | powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/45b07964429b6d78204b1c49ffc050ce41a78f36 | arm | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/f6488b6af975248f36876bbdec87b3e3d5f3026f | ORPH sparc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4de9cafd1a3d090ff2c670a25de06cc05829ac83 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f5d6d25032e92014102349601b6c125f328190a5 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0d1d0d0678d80362dda01887f479d51c3c44f23b | mips64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/579fcfa8a0ee7c13cd3479c5054ac7e192d318d9 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/13d44c59fa3d2c9aa70fc1e1144cdcc40dc06f18 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1447c70ad234cab2545e62be9af9cceb59230ca | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3747125f27b5a56598d2465d82034b45c517be85 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68393a26d7ed67f6a2c04ed9b885c395a54a37cd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/034fd9713203b6ec6dd62e740f86d8be8d271775 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b7cacc28721a46bcfc4f1231396bf4679753446 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b24b75a97b071674646add7f901792fc4d2c80b3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ce3fbc77347dc9c7b64e9830e7bcbd543efdfd7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaaeba9611d962ae36d1b2d32186a6ff999bda50 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cdc7946b36094527a2cc953d7ee4810546b086c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da5672a229a65b6d44d255c7d883a88e704106ed | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3596f36ce06f88bd2a4beb9d875a724e72e0cc50 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57163bf8a67d09921510c3a31d0206584adda6b1 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c1846ed762d8055e69027ad7f230ef9252877e8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d12f7ca83a6ad051fc2143781a080ee3c1ffcb9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0cfd892f798d2ab1e9244cf53e8512b8ef655713 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60b4cd6c7479e76d0b5b5c2c8966d3b9cc445d31 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13dff001c70ebb08b7bdb2b90e2d9ae4fb9af568 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c55c907b73aea1ba7421e016804c20f10c5e065c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25482d4d1a1e3591b8fdb22d17db2102fef0d38c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5991088b4955ee2923e1306ffa8c06f55d90357c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5524def580205a0b5a962cfbf614d35a6421e133 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d31d4916f623f42809342e2d04bedfa46cec0bc8 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91c9699cd214c18fd1b69747d2b8c1f9ed7e0cdf | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6a5426b4250e2f75025876bda0e16ebc7831ef4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3934666b916452e60e88ebdd320fed8a637e20cc | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c2756bf91e77caded5cdf8e51fed996ebaf703c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bcd546c1ed2e0c90716bdcdcb7b2755cbe6c3de6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65295bd31bc19f12571b66c2b462856b71e5bb3d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6eab2c65dd4a99cb6cae69127b15bfd8d3e794cf | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b68916d5df4b09219b7ece2af3ec9bec0e6a03f5 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96a9d0f14bced89cca5346b0969fc6603514c821 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e1c0fcfbfaf3d48fec3dcef55e1dfe611bcfbc1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b62ce0b5e164de1d201f75fbfec5bd997efab7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3528c3d232dba4133ed0ba344db3a1d44e7c7e66 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a8c2aa1673a13b5b958bd99ea6afd016f479fbc | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f17466336966f9be3804d17cd5a1a6d2a09bc65 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91a1d26e21fa4b2c4c69e1bd9ff04ede4080f489 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b18f7a3dde5c30365ef998e6fc2ed6a5ae5360e | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d18f23f2c2cb76c32399e5cff4d3cfd3f57a92a9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1376ac8133a35d7901beae38c6f79440c319d42 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9db290e383c0b7982f4d0c7e662474b7e1eada74 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/727c82281c10be94c0e3883c64220590ce39b2cb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed955a54a499148e64d5969bb6cfaa20b6da56fd | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eba8e466ae228a984c3727d0e6a0300d1b2799d | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10de4bd35566e2ab63366daeb0764f481fd13969 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9aa9628642744d6c1ed157944331fe14dc22fbe6 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b45c41a27a41ff1790fc004d707823f327249131 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4bd16cab099a2c0d2faee4166f4e224bff39b8d0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/beb7f3fa6b5c2df124be39eb737d90c7f8ce426e | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af50d69c6d2ac8e5e4514022a1c65ecf226e4a2e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f82f876cfcd98e648e9650a88d248361f55d1bb0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76abb1fc99d3a744320be891801d62792888e8e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/108191d15186266fe0b8d019b92735748e50d363 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e78bb2ec7411dac5ebba01b8cd0d591a5c93c18 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ebffb3d78373ae4d9d9ec4a7cbbdb91b81311eb1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b4ea44fd6ff8803d3d7b4b8372a43c24d63e9e0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92d84f9ec79085cbf25ee02b1662aa7d304f5b92 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/099fcfb556ec8a0c692d21258d0f641c6ba459a5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cb9b01eaf83015a9b8f4d962f4585c1530310e6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0461a6a5bcf34bc3cc1e1495b5e0d94d49b9d969 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d46a7d4f6d246d638b2ffa1fe829ffad2bcf7439 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2311293d835f9c20820f853397038615065018 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/476ee5d30aa1c199052d00f05410a9a98363b2b4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e9a83adf2ec3c4e8ccefd8fd0e82c78cef73547 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbd33274df368ceeafadd9845c2899c5947835a8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75002eaac22413096b3d40be279ecad780eb4cf5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a39c8c291f677f565ab31e8ac39d0bed8d9bc7dd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d555b16e96b0419b02d66f43362c30733da6519d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f2a5a9021ba0f3343e60f57cdc502e68ab28883 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56c81aff546b90362af6c92a9a23a095b790aad8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44a530add1a0f0c05b8cb9c4824e6f0335181a1d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9941ea8ce6ad5a3340376a540cf799a0b483d28 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f20db02e565ea7beba401419424cafb5e98b54b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e18761fca14fe7f368b2fa3761f8164774f4c09 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20b346be193838dee700a671b8a96872bc010914 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40660c2914ca93a600b5e670c5079792a566a0c9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6947832016168924487b1c9beea340f649da7247 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bffb3dd2d77076bc71fcd2522183f8ff486f2d6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f70b7f3f6118224af4c0e6fe0e5627df1bd2922d | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/654a3e8ef138f40754fea12c7554f3099017fb79 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04c8d05ea6522cfc6b97d24f63a1a5ed3d0a1bd8 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/112f92c8f54d0c10d1418a33c4eda5d79919618a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/024b334623a536b3024e4cf436071cfe648d10fc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/293a1f20a9124395b4998d23a1daa2cb77e83663 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9d15884e889ec327b9f7d31f53c53f2697109ee | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c99dc6fe2150352671e4078c4a951b14e6b9efb | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0fda11b2948e08d7f742bf80675c383d4b7d6100 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2885654648d7fa7fe083a1380cfd632be5fdb83 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef15ab63bd976cdb1487e62a551e00b4adb91a6e | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d355821a0036f793ae03e1f23af86584b76b85c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2add144ffc83e064a1417e4e07444c77381988dd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac52ad7233a7dcca5b209d709c68338f80fd184a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13586983515416813ffd0c9777e9881c82415461 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57b326e8713b0a87310b6d3acd6c6baaec0eb51d | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049942c346e2095dc7855da9ec860f26a3ff49b2 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/487f4699456fc52b229468f9687a8357b277ff20 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15e91b0ab4b8c715446988d17355f39d7bd1f777 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/468fa00010b147ee0bf88c3bac789e0d8c995598 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/224e8604e9a576cece0c064c42cefa24e1eeb343 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e738fcc1cdd718d51422f6c793d082d0b552e0e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f8e6e625f73a90ba8056caf10819f3574302c2d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bfaee1c02c84e3a8770350e32ad0c639eeb2329e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f361b013b397d5b5560d55a4e543258807ae0f34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6b3766a1723fbb22ce88ed92678ad53841fe084 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2163da2eb2eaa86aa0b6a693488bcc9790f476 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1966045f16a2c02c0154e532d6a9ab87c7fb3321 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e905b4c8b828ea2b9baea7dceb7300a262276342 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/531818a31b550be667096e4aa374d3d0ffef2c95 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c101f370ab49a776553de3da1651c29890974dd5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf622cd470ab525d4e834531628509e095048814 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67dc1d251e50844715910c5080375ddfabc60969 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/21f3fd9fb89ae1f90ee14bb302b420f2d7fac9d6 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fdf7d711c88cfd891b697b6c1e616ed3f8e0a0b9 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e130f535c216979fd01803ac88d29b5ef1a16ad | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7dca2ce13e2bdc2d9da7708d8e9c5f49124aecb | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2085fd59bb11e2481672d72836cde0414224cd5c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae04803d5e9f9c1b3b3eaa84aa7f227dabf764f8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9c3fa57ebff1c93bf412cae0e38abebe0a18a94 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/033cffbb9432d6232e96137f2dc2d7c0bf13d0e9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18400cb867bfe208f7888e950c5112265efc3262 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e945fd58a1ef316050c0d812c028e312736f280 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6df1b20c5a69c4bbdb7d226c6fbe98d8005ea114 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/723b5b17cfdf936e4a41cb9f43720f289f2c11d6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e1dbc860efce5541621e4a7f69bef41a6b7e452 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26662c0b6f562a4a1174a716a5cd76b2636ca1a8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fa2fedc1d96ede15c3bcb29ea242f7b706a3977 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/19305f6a94657c77559d4ec4e93ca6fd6ab405b1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25b8a5f8f99b09903da26b4007eb649fe5cd50c7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bbc700c0d55b954da75f89783e27f08119a863a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4b5669e1e32c74fa14cf26d5f7d138092c3880a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a075791316260896bb8fe522da77034eba8a442 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2e95531a4e938f149964298def7ab1ae92a7e85 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e4e1120961bc34c239b07650d595b026761a1fc | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d871e5142c79c2d97d46cef150d78e2e3c30bf1 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aee20d44072f2bfafa1893061c7c0c8f536cda7a | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfe83f4172ec4f5053d3dbf27c8f3e86ed9f93c2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58214f26f7b98d5d6d3c5066ab175136dbe469e4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8efd12d9b9dc09a916f2b89f3b8e55197e22dd7 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3631142ed1c9d3f3df1f9cd8c837daf750117a15 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff09c0375d4b5210b25e7c3983494e1370c1e16d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9382270bbcecf98647857cdfa255c7329f4dffdc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/525c0d1056663849659a1e29661a026a0e8b13b3 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3513705bd4ee19bb3e4ebf088f2da2bb2877f596 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7c332732860395f668f10229ff9cad2be8bfd56 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b33b300e7d45d94eaa3b5b9167792b6dd9fc97cb | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b16c6201a8afcef54fcb38d2689a806b0676ad51 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aca6414e68e91806a8a42fe7f04336ece6a49ea9 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c575a077e1ca7d1c20e6ded7dea224a3ab9a9f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/859afcdd722ba4294770615c892fc7e42a338570 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7b3822e293a29978c44055983168f06561592a2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8138ddc9db453f687e3434e74d7142f3fdd09e15 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab74ed0ce42bf20429294d5df162e77c7332a627 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fafeddcd92be8f226ade2ad7677699c64216ee43 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cd3409694f4eaba68aa01da48d2147dc0f23197 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f926c960a2788b8911a7f58ae50b2d320a2cfeba | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c6b921949847bbf920759d7658f9961c784cbba | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/662d78b8e2c4e43b8e050c721e4500698ca520ed | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/793557413cab80142ad5908d7b8cf568c65159e0 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70c5ff8e380bcffd310ea67946bf8c5ca06cf5b0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1403ec0bd8a27142bc79afbd1f732459410095b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/398a6b6621807e4255251004b0521e818183182c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0246bc157158f24ece04ea38adcb1d73f063c08 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92139b2d1262e3171b42a7a0a87a65d5cacea4c1 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e9440d8c1c0971f228f39e07a6947d7b1fb00ee | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99faa45b892a622374980585a759c700b1284054 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3052f95f242775edfd6e81a89dd310a0961398ae | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/648108276b12836e1007fdb389daccb38dbda154 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50cc1a401e0460c18f9a741354789d3bf83f7bb9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/481c4617813da031beddaf00b97440071f646809 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d018007362db76f75201e91a9ff987797c76ff6e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa31a0fcc007c1f929400f6567e24688b6c1a07 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d2f9738deb31c84de9e2505cce98eab4f8800c7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/125aaeedef13bf47571d7a3def224aa4f20f49dd | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753977a39fb730804f72588576f0ac531f50f17d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f441cd27a15925adc46040f3ac42dc1cd1272a23 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c878436f6c13a1a79b0dffcf812cd587b5cf2c3d | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3abec1a8ccadaafc9bf1b4c137daa59324163f55 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0df148f6880b56032eee2e2077ce2790b08cad7f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6240fa8bedabb45dcaa3b6602bec9dcc3b4ba1d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/856e4591a3efaa6fdc6ec6d58f153f8a2622ae11 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea5ddc415b7e899a9ab6dc863a630a42338c9c64 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7395971eaefb834a970bf856e35734a12d144ab2 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3501d11ae1563425c8394835b91b02e10bb1b67e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c39df85743e90453152038e644d99443d9839c0 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d0d38691e249bb643204c84962479ae1a7b8e03 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57a3c6bc4b7a1280b7bcd63b5023108a4b55e19c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eff367aa8553e76c7a3ae073c0e00a32cf575a10 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6445b80d4a036a6881e3898ca0ad2847dd800fce | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51a1083b3b698b3e7fafe973b87800ece6f65016 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29c8217bde09b4f69faac8ac1581e5076298f334 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b53c5330e77313f26275ab7ee1bb58a9005048a4 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da0e0133c8820db9ba8839f995ec29bdbfe79a9a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/280384acae952f6b95d9b3eda6b0e05e75815aac | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/389d8cced7ebaaced7a737696ac9682f2bd81e47 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f20364f6762afbbe2fbe9dad16e7eb3f5297be7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3131142080dfd9eab1d97e9b38b5e500ca13c863 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1990d3f25d266dc2ca547600982d6b5ae35fce4f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e056378d9e4dd72bba41778617fb9aa8036ed416 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae61f18652d936759ac061367871f11e102b6715 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce7b455b58bcf792463301522b43958dcb50f1cf | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2f05c368e6fc165ef3224465b2aa2d6805074e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa2d4115e3c9c3cca1cc6c9142764f3d7fd056d4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4285f61869ec9a77cf28e7a0259572826fb46f70 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4af6c38457f130e59f7eb3072fab0867e18ffb1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0341630913b3d8742693163f64959a0ab6fae953 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b23d2582c938e70603b97b363b017a3c8310af46 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04cca64d2d3f29a70ca029746947ab5433ed6536 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8eb4968c98b15535a0180c2bf34c1bd8b367c34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b8903ffa28314646c176fbfd5bdbf5bb5212f2f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f72e9457cc7367d4cbbe81db39123587842d631 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b487194ab30dd2f7fafd5249edfc0ed5419779fc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b20b882c350cf51d90dbee9e3b4f16a60a25cedd | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a57cdea432f78003d9fe2beaf9b67ef9455f206 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8847f49cce9b5cc973876ca6c3be9c8c54433ff | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eadf67c705782e3ad95e14786c788d01beb22338 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b7fc60412fd6079f0398d667f076e23a5b84709 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6b4123d5fa2ec8df981e2dceb396242698e8b25 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a8da0e1363bcde90bb7e7b7c6de909f9788ea1 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecd1082635f21c693b4f5896bcc675ace02cea21 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ef5844277efe3cd525637c1d606be8dd55cc44b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de6060b0525beb3b96da0f587d3bcd441201e30d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2bdc01ad5b444e104dad3d6d549874878f5b59f7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66da542cade33a7952f6bedb3cea015381357df0 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8deab2bca3c73c2caef7ac7258426335ae7f3a0d | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecedc13d35677e39d78e8c8dba3e2634c5fb79c6 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5b5895afdda250d3adcd3c627b6527c916ba26a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47360710bb59e9a185bcf2cbc667f47c06a68f2c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88e4fdd914fac80716f3592e4e6f144ef006ffef | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1189c06ef6d5338405c16940a56d381582febe02 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/362211e4cde23569b093f5764713e84f2cc5ea7b | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/095f1d64ec43514fa33f2bd6cfdb5a00e6f9fa78 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/912a3b98a2ff3a1e489368e1eef0eb0166ee69e0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13f45c7bc963c136ef792a7a0dee23771e96ef0f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/17bda642770aa49a9a69458d64f7b1bb2a749279 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bcd4b86aa18033d0f187db96e2e37de57a2fc080 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/102cf43148529ded3e7eb81c412641c0f1591e68 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d998ad78a13faf2e365d612d3bb69c1097981f36 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab0b1cadbeec1e9fd72299259535f8adebba669f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20393c48c11298e7533c71b8de75d729549cee23 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d7dc5407a0f75245f0ca415a4b38e2b6fe7ce80 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9f395d70474baf768f60e0fa182a59653d5455 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770e7189f750f875cce41a667e97958d6be55bb0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c160f9198fa34826751e00acc7300e11d85f20d1 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2139c83b05c3b27deaf5d4444cc5d856b741b3 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9eed1273d9b16cdc5bd02930461a87f2e16db1bf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d77ead032cbd2afad2299b57731e65719ecf7f2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4550df77c21643b384ef7cf547489331326db229 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2ad7c04585d0465292e7c0feaa511db05223d5f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c12df81968415f3a262edbaead313007c482481 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99384c3c4af05fcf6a95e9a55282060213300e91 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c772ece1133b21ac7446594c9c7631ac702981b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0589d71465be945f59e94aa6def120bff951931b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d8f080d9473cdcc7456ffd263bb66ebacf57b2b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/052870eb8f49346999499de3a867e6d1c3a51184 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69fd8313995b288285a678f40e08469a610f47be | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14becc73bd24cb99dec61bed140608e1536fd4f6 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/336a54d90ba96d7625945b6017fb99b50d738f63 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05478b283ea00591fad1eec35b2547b819c70bc6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba0128fcad9638b1540823349156ae0d3e16e8b5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a37f99a0efb0c81e53f8665d28048e6539aefbe8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48fa6245728913ff6f17808cb1aecd7f2ec3f285 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a536bda1bb52b164e7676abd6717ae63b5b19f79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ab083287e77aac1fe7fb355aa05ab4a9d14e06e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9b500c16af76b6d527776439e4bf591834ba782 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d103f8bfce10689d4d5cf814fa76f55d07cb4c6b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4eb559ac4269422971992755aa3c14692dafb79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6d39fb4a892716e1961bdd9bcc8ea2654244b78 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd370c518ace5614b69226ba12559f601951c9c9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43660463c9c0fbfefdf488410d1a8a5bbdf00de | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cdd41b5b6ce10b8c7c5c4d2f17bbd3196796c2cc | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8800b3c6d67b1b97987d1e8de92c635c390a09a2 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb25f327f4ebc55df024b625b5f4fbb02c9b7a95 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3046362cfdbf8c4f5cf65e8da7b2500a9aa41ea | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a4c665283f114b1e84a1ae3b5d293ce5805d01d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8feefbd5da4664755dafb0e79bf6de97673c4148 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eab9aecc2d29af271f3b2b75c5a7323b4b9ff | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c49a03aaa69c9db808655bc3d47c5834c7579bf | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07656fe853536e07d9746e6bc27667812c5e095 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95bf0c07fce9fff942d587197fa50bc70ae5ac20 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a5010e099c23db1689abaa8609d62208c5201ea | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f906cae1ffae6bc1bcfe93a6fb9163a0a052e187 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67406289b02f7d79e45f535b80d41585f8147e2d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b86202c610673e3b74e91b40878735691147c89d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3688c83a489c3ea9073b1ce6b10ab0b60829cbde | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9237f3d954a74af2319f3b4d8e51419d1e1a112 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86018b0667de52c37737c7281acd3b55467407bc | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e35b2ea834a7b11a9e67c09cea08f51193b2c973 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/035c6d866f3e28efd8c85c26e25eaf18de234c43 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0437b3f8c63e19cb739aabb44c2ab58c6b78bc4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c461e23956fc987a84a3ffa1d14b48e7a54a9ce4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f6128822abdc9def14ab3804450201e4520290c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7536f313c89df0196050fa12f2852f141eab6387 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7dc6ad1c4004fd2dbef4a253c3a3bb18ef76fbc | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be47783ff628e88d0f74068bdbb78e15f471b011 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/217846fa3d889f88f8c62eb2867be4e69f65e138 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0160b6ab56b2498bcfde5131f719f6270a1dfe80 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91aa0225f8e7724d40fbd8fc818c0472f604d92d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d6430eb9158325675212c4694fa897e20dea0772 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e6ab62ccc196fdd43b24143e91e9f8ecbdf88f1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/467b402183e56fed65fcb28fd5020aad3378029d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e623f6f19a8c36a984b063993451dc766ed0071 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b79c2ed3744e816c1e538d67e03760af822e8e71 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5d91e78f9c9815ad9b2e75e586379afc4463b83 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/722d29b185d8359a8ed398fa3af97cc0257fd06e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5f10456bc2647827b2ceef40467b08798e29c17 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4986ccb894f1b647105de401fe38c567cfd3be39 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff83b2a4a0bff61f4eadab67def47c6857c7e7e7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0285f9b5cf4b6b955692885038c51db6ef247616 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bea860e80c9cf225b0cc2e582adaf7cb4dd7eb3 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0ab6aadf77cc5497bb0b38c26824c2797e70e10 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c61087df941d619dd0c28b0e1e6344db704d3e5b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/593b3f0420c966d4c06057c04305a456c9f4dc23 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39ad3a5eca12772934a581f525fbe9ffadab0029 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75eaeb46f58c61aa19801abdf166789ccc0e7541 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ce04f414545fcf055dead857db45030b984770 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/577ffabe13af99bfa782b43dfc51681d2edd6e5f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ac6aea3fca0d0690c9e576bc9f346280a39dceb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6b31a8ab96144e8f44f70b11305bc7c353e1ff | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9008fbbb4dfbed85bfb47a8fb19769f928b808a7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95754801600419bf104cb8f052c2d4151cf15f80 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60990a5a205a13b57e382104a9beae81f9e7da5b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d07b5ed1693f19606e1ec396ba4ef1247881115a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b20c2fd6a0b42bc9d10e44c50dc754cb07e557c0 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/639a80ee19f9af150768fcdd29ed9030c9bd42e9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05fb0639c15da71a58ed35ead144c8614505b432 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/605e8178b936a933a880c7e70c8f997ec83b4153 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ba2ed0c5a330f7e2273ec10a71c68478dfac22f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8d0487e7c29ce6a0de60029a58bc4fa34d1ce2b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30673975c609ff9945a637ff4e5b103e73df8cb2 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/313a1ff0ef1ab3ac16fe7970a11301e8411242a3 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da8ae8305313c5250e164f2950b4363206fadc79 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/daccdb96bfe96ba8ae0398b7a9de29587da9284b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7ff3947043080e9b3b110512d26919adb74e021 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/866884501f385bf63255204ff2077ab9368ac441 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8abc3ecfe1d248e7a86036171676807abd0e8e4d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/469767145c26531b04ae4ed28f82eb78c4f431a0 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae6083d0681fb44f79d44dea8c2162df155d2c40 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b9bf32bd0c3e351cd95408229bc4aa3c1659e8e | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70b1b41c82d93aaeb5dc4a82968cedab1cac3f17 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e721fb2e3d7344480a0de6b406d450f36623b27 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1515d5b20f37fe3c33809b306869410c1edd5cd | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6008380eff951a31c79431f63c653d14b2486f6f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a191f65a2b5ad06bb04940eddfb546d3161e471c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76a92e03c1b083ac8c42581172b086202d541329 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f546b2b6b734d0c0a655a430921f6c8a51396e34 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f229e74679dfb28069866f6a5144e96cd9cabeab | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c227bd1dedda679f0ce310b19f48bb999ce2c423 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaeb186ba72c1bb3d3453200b2243aeed4993364 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c56988ccd43603d7b3290ab5cfa6ca44e1686d6c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c551a712d01f6bf790bb9616fd438cbfd90b81ae | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02c8311151b020a25b5d4d4a38bf8c4e9c6e4f03 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f9e85c1cef7faaa93e220e849f1074dfa1f8e4a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/768a920b9aeea134e4cb6b9fc1134acba3b5cecb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be97387dfb41358136a58e60435673d784b17ad0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18e4c00980a82c14f67b29ffdef507d652fbe3ae | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b4c8ad037eb9373d149c3f5fe626a4927436934 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20bf360b52c315f8724d95c0c28e04785b9149e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f034acc6e6c9be65fa64d9f0794709b363f42473 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59d2488d6846be206ce1545156bca059e3e4225a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93f3face642ebfeec8b238294c69351b5cd15eb5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15def9beaaa35f0b9bf096f761437b659565e672 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eac3bcef4330f951cd3baeade8821500edae5254 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53910cd2f938f602c028e4f594d9d32fa22c444 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01200ed27548614d0e3a9aa50fdf4b7b1bd4ecf5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49188c549eb37dae26719d7e8f952a0eb921295a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e98fdb82fb2f5e6ce082ae037faed771b8b32aa | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/689b3f2708c7841b412a3684553a95b7dde75ebc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12afdc74d00103eb872c70fd2c93f3e2bde3fc70 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38cbf2ec29b03c4a8c2c3389fdf8328af1048159 | sh4 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/dddfebc5dd8f0ae0d12f0fcdc64556f25c7d5480 | microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/2573ceec25ea5930a4cbd8421dfaed8440f89a6f | x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/f582c8ce5229ba1dcdeca631e95e9aed05fd356f | ORPH microblaze | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/398c06fa7b2df182ae1f091c755410e2f8029715 | ORPH mipsel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c1fb95e5bc69f7222de06ad78e372568415cd9d5 | or1k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/3139288d750a68c523d00fa51ac0e3f3b8998b14 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/1c0efcd2c921979aad7a4b44c5f0f7be41bf4168 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9d1e511f3ce60fabe5aec21b5717020710eb49ba | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/e656e719ae6ed88bf3961fde95e005bc22879a1d | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c16ce296b4feed455828930ffd3ef3a327d1452d | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/25b0060529341dada621de678e8e41e080dc01f9 | or1k | hans-1.0 | NOK | http://autobuild.buildroot.net/results/56e6d8cdb73e5dfd2749f3f577cee565328ce799 | ORPH mipsel | hans-1.0 | NOK | http://autobuild.buildroot.net/results/27a111cb9c436f84dc92971d9e2498139f6a2e4b | ORPH microblazeel | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/edd82e0ffe72072ec71359229d374f5b96b6616d | ORPH mips64el | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8eb17e93f4d86c6ade6986ca1bb8b19bbeb789a8 | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/cf7bbcaa00946f1ee9742705b3ed1a0a13c05124 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a7e25f75c803ef912063306ea2d15a187804f8aa | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d506046a0b76b926750e6527c137a913ddba0fb0 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/eeb7586fd778dd66efa45bdf75af8e37ad236853 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/be57eb9050f80fd34af8977052beaf4927e19bba | xtensa | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4c3066ddcf2e799cf6ddd6db5de39d8267aea55c | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/67a7166ae71522dce1edf2dbfa207d7289ddad99 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8c58041312b4a7030d3fc16fbe36b6148f04acc2 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2601cc177743799d16f6b02bc7d32468ee0b4888 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/424dca5af2726cc23770ff4884c07423e746daed | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3067d8332677e33b3dffaa01222c88431ee5d55c | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc802009223d43ba9e18ba3e5da4f605933c54d5 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/54f26df18b8daea718fc4d0b2ab6c126bccf31c7 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/98d5aea4595c7f1fd11da8fb2a871b421dbac7cb | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fec296de25fddb227874860a81341f890ed0eedd | sh4eb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/40251ff2986a2a0397436aba201ea5aaeffd0dfe | i486 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/58407bb58b4b7ebcda5e2bb4c531ab2fbc608e51 | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/922e6aeb9cc59850b66365b8ff44bd5e5050ec69 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/43fadbcd518e524b38f039cafd2226eedc51cdc5 | sh4a | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/17da3b1da2d4a469af034864102a1b2039c44f56 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fdb9590c12ebf1b983e4a3c5c9ee353a0daeaa80 | i686 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/781b68aa11caae24551412da7835a28b7357dfa8 | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/8c7317d7e5d2759c66ab896bd56f0be28bf495ce | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/59686f03a288c98e86157ac7e31ce563284f79c9 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd0385b69810d7e4620a45a02cd61a7902391308 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f731a96a903e23f54c17bd276a09df7d81c810e5 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2cd30bf2e5b145203967b896863c3304fe496d44 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d8779ac11b993afb33316312459d85358c740b8 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/876f7d71ab184ba105d6ecf601ebcc1f7421c6ee | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/925fa3fce9fecb03568ff27d6ebf561f424b65fc | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0a10c63d0a45834e783213a88eda6019a60f369 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e0880b325730750148aee00b4bcab085e60ac7d9 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b690daa7c7ab647f10db0ed5d5bd201261b989c2 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5c3eb1884e7b1c8c9459c62e69ef9b3046d597c | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8fb2cae15f096ed0ac2ef1350f59d81339b32d26 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0f13901a1afbb2997ab955056b25596e3b41b846 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3c3551281ddda4c0815c8713ed879f725ad9528d | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c548b5768621a3590d6d4b4159c0cf8794d63d31 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/afcaf0e5a8ee19990af9744fed9ba005d0e72328 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e72361a8a5406d8a3b336632bda0d387cce9480 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bbd9559983f02aa436286cb5bd9f0783c01372fc | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a413d2387f8f1e995ac5be4f73bac51bf501e717 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1a90d3793f0a38acd70a5fd5bc1af30bd90963f3 | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5bebd8cee85a1ccda37eaa13b6dc67b7f1316f13 | x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/c72958ad9ef91bb61e2aea82c448fb421b713d00 | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/01b5b3699b44f06105d832b4f9072787807fee96 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/16f5ec074a929a7182e47e4e5731aadddf866ffa | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/19f5fa807190191b65724df6654aa13df7c1da39 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/34c6ee81ffcdf5f03f0941999d8e80f9b58131af | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ea2a851207433848f763dac15bca49106cd8a21c | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a418f561f2297a813e4a21294e1501e2fc77ee7e | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/58f8911e56ab3c4062ba179345105ece04f3f3e1 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d5a49cbed0061e070eaf3d3ac9319b0c40dfa033 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e33526e8689c012832c900afb098d2c3488c4f48 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/12a7ed73ca5f6bc9319f38b2f2adc5a393fb5c58 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/0da57fa67f8ec594359c9a5f3883a7b2262d2fcd | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/7d0fd06332d3e5fd3cb731318f99b26fe3adcd66 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/f5584c2ea8609a433189c85d77c20a15615d9a1c | microblazeel | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b40bde07b27bf198a8cc4477522ef40b39d37d1e | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/04fc338a4fa050192b44ea0f963865febc6bfc33 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c2ae9f3c6c4fcadd3d0805c3aab96729007a931c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9ab008e97a0573871e669e925646c4cb4da79a98 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/db9fc53ec1f4d3dd844d008c3e8dbfae6240e64c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/61096b1d810305113d99c1e4d55726c8f3ac0476 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6bcd26ddf560b8ba9ae9488446f1bbbdfe17264e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ab5c1db79c8c86be7b710edfcec59605a8c209d8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b6dc33b629136ba6ef068b6bb16918ab86838594 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/128275f68d91d31b3a3756e0b25d097685c26f46 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/222a77110502d0106ef2bd1454e8bdd2e843f4f1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fb815a48d985cc5d5781a591f49534373f0acc8f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d4cb867b5abe193af2bd0ff1040e941d6a4ecd44 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/eb144a0c1637026f338607a105efa048fd9a829d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/78c09583f5b72157a7155aabe1375616c51b8496 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dbad924ab1dbb98fa639ecbf3a1d2b1ad1d6de85 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dd60a7a6b44daad9ca7be78e7f52e083318ef8ab | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/03e02f22b5a938cd04f41e3b4a875dfc87df41f3 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5982f9ac2677cd56fd19fd263eb942c3709cf3ba | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ddd76c17074d95382a1bc5e43452b4de972c2436 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4faf6e38f0fdc7f81d96c7f25aba7c70a2b87498 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3c1900c0a3be12fa179e02b221410f4d0dfeda38 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1a2caba49c8b4e97ec703131acab904932b54023 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/238764ab72c771b1df4ecbce4bf377b2c46c4b6b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b99cf0eeb66dfd3f378fd95cd9c4c9411c172891 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6ace6eede4947025982438a9d51c9ca7d3560b71 | or1k | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5bbd73a60d8565a1ac6807c76a2f26b5bc52e345 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec9b7cfca974a220c5856a8f11719e6a2e3b5344 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef405cf95723c9b8ff8399586587d61c528220b4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/04f31b57045317947be6098e245a4866e1267fdb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c47f6c86bf8d9aa930af21fce8e5507f7cfd9aea | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/48fb3104f14d2dcfdd257ea0797a8cf543f8e63d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2371b6c6f3d6d4c24544ce4c9e052937515803d0 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a4e9f49d4b1d23ccc802599cc2ff2533086bbc4e | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce83e4021105c7e9f720d214a90bee4023acbab9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec546514fc97a87efcadc1dfbb534bcc7146438f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c1d992f6f7610c6cb6ccc2f201484c674fd5497 | powerpc64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/07d030414b3d8a7c5cfd978bf6d1e5cfb1b10bff | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/71160e561ed1ef847c2d7147d1325702ae5eae57 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd2a1f035ba4d5738890061006925de4289d4a4f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d47b321c4eb70fbb757a6d42c1d11e044e2700b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/afac1e13c892a26fe3411ef196d87326b44b3b41 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f944e2907bb7368b7aae50918bb48251c60761b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f36f11ba116ca39fa3d87b511360673ac49bf4d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8ff8ecd57d157abb6ac272a7ec2f4fc69bc13ca0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1a4a00389bcbde6d6e6f3dc663c2e4a6a4921ce8 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/418d43b831fe6745f0f4aa4621d34370f296e7a4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/65e73146c9a7317759324b8d609240a472900a1d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f9f44543b8edc59e5df9676aabcd075273e7c35 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e291c2f3ea33aeca8300f1eb932c38bd73029f8c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec9beda9bc89455eb98f22b91a69147aded49024 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/811b802ece04e1a853ad52249d079b72e8ec0904 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/6f42661607ccb1c2ef0b720e57b84e6270662aac | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/79694c853e91811a3280cdda63cbb2f58c96c838 | mips | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/22f3ed9662571bd63218e782eb444a0498367e20 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/3d912222e2448518e893e46ebe5ab7a442654c0f | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/57a73a63d425710d3a9fd5cbda135b22c7969ed5 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/465b07e7688fc645b24e74558c3e04333bbe6cce | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/661266820547ef1864873481fd6738a2dba5a8f1 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d9846b17d766c8075494916c95eb4ada4788af3f | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5864ed773c7095dd591fe5e112fadb15547cf726 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3e1cf94671b96f798fa28507de9e2322fa68398e | sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c25e1c3270e9cd45a019a17780dc3d301b31bf1f | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/000d04262e52c42017c1cb388199a8542372eb1c | powerpc64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/bb76812a0b6b4bd69eee0ba93f39ca7bd95a9ccc | armeb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9c248c4fed03b8bbcbf1e93a6f3f89dc4d404dbc | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/b92ea9e4d2783711fa584e4bfb8b1d8a54e61947 | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/92587aa55cbad1a4e45fa8ba0c02d5094ab687e0 | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/69a17ab1ba240c46d75d18b402d5f43f9168fd83 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f592ad603ec47a6b3c9471ee571a298a9d1f00e3 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a14d3bbd172e7a4238ba6ea594d6ed9d3019593c | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/425593307f6682cd71a638e03189996c92dfeb4d | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5be0d99f6e444ce1569f920f381f9fa9b83058b2 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0153714771e9f74240e00a47842d93d167ec659f | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/04797bbf00e47cb88b1ad03c87c6f3a74c35a79e | i586 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5ea89f6d6abbcb15913cc8081b789ed35a03149 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a5637ec30e169179a68a0a989dd8c5e9255e01a1 | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b393bdab3f154f6ae0109edf93bb263ce4067e13 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cac24d780e7c776ca6720e608a5af9711f4bec | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b0fdb34ef20aa3f99231fe0c38b185c11592debc | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6a2f738bbea7e7a4b775310a0cbe0887966882e5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3a3913c365dccc1d0e618e9bbf442bde84005f04 | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/254c76223ef0db1cc11e621e2414b41d4c13a295 | mipsel | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/5dd44072f04898f328e6241e6bc21102f891c819 | arm | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/bc5580b84260903615b8650ca53511a51d8b4941 | arceb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40e25e396e2fd1d05851e700583c1df7c0fc398c | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cdb789199bee01e318cce23c4f5289dd7ee88e94 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/26ad11b20114a38a73b0633409ae5da3baf2c011 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b0456d5f2aa674ab70cd107d5e9e94484f01976f | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fdc538d7c5265ace18f427a582a3ac2dc9919cfa | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/bf42e2b5788e33024483ec87ccdbf333a40c4ef7 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/72d43fc2cd756eff7ff9355d64d7a45d31110a4f | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/260661e31b2df08ed3bfab561a3fad394f899a21 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9f6f6f4cf56e230530256c7d752c084b0a1178d3 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/72c0e6d538166d6234e055c97ded326205f027d3 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8e3d3ae7416e20a2e03eb1e08df77a6f303d024e | powerpc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/7003399a38ffaed5a17efd783276b650d153cfd1 | ORPH mips | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/b7162337d7ccd032cc59784b55d10921410eb7ee | ORPH armeb | kexec-2.0.25 | NOK | http://autobuild.buildroot.net/results/8441a392c52b812b0b8f2b3a44a6d6ed1e4da6b3 | ORPH arceb | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/dc56a69627bb2007f30f5d740e490a0e5b99345c | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f9baee7da8cab72583bfbcfa189465bbf41b77d8 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/01d9881bebf7ad56bcd0e2a0128ef0d63005108a | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/ad86634115155bb515acb90f6b53ebcb41bb60d9 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a4f0e1e02540ac591b7f04542017e27c8575f3be | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1eef05c7b38520ddc5966a2fecf188eab902f09d | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/896919e82e698531af68a946d67dda6701201628 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a038209c3580f8eab743db8ddb4a777f0a82e4e5 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/85519741c23bdadf39a78f4b120c8d086cdc595c | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f87eb71ba9cec7c4bf37c20f40a57ff622fc5a6c | microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/df7c4f2a69e185ff9f91f0e0f759febca9583efb | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/3960c55e90f5cd2b09fe7dcc58d0f627bd148940 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e0b1b33ba72787490bd2f071bb7bfc904b629fd6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f4c6df198c2a3db1381a79f4f3b9e148db6ca6c9 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0253b05955d729738072d7d70d1295d6a182e2a7 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e0d8af6933dc932c648fe6866a9e7744a1968f07 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2c3eadfa5aba8965afca5174044615e28d828b64 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2e3f739729ffa4c71e8669cbb22cba26e4eb9a0f | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/7259eb7ef9eae5702eb17ec228f4312c534981a7 | sparc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e9ca7bab606b5abd576a2d4ac183cef158f226a7 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/842760619da7357ab9cc9eb632222f83edcf5bd1 | arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/c5783644d812b7e5612d82edd8887ad4341f03af | sh4 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5b10a0af5b1eb0501b0ac31b2db9a1af72a899cd | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/2fe8e6f16dd04813f564b1c0fae3e5bd8bca99a2 | arceb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/395f6ee40ede21fd3ab3ccc9a94f676154449be7 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/fb5d19d44206fb3913833699d8c41dabc5773ad3 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a614fdcd33e70592ab1591a19eccbc1e21115aa7 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/83e3590752788c8d285e2cece38dff30c9ff61e1 | s390x | libostree-2022.6 | NOK | http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0 | armeb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/447b25720db1661e3a84202f333d139020b4964b | ORPH m68k | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/0dce5065479003ef68f74df8f8465640b1ba08b5 | ORPH riscv64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/be5c44b05b4cc597722a924b40effc30d7b293f7 | ORPH mips | libuci-4b3db1179747b6a67790... | NOK | http://autobuild.buildroot.net/results/9158ca7e6f8b053a04d6faa2d0cd4ed15cdef4ac | i686 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/d73b5aa2bc413ee7bddd4da8b71ccf6a8c272356 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/dcc526114a2f2ce1aa7ed33cdc2384e7be8dd6ac | ORPH sparc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/ed5603feb43c3f85ece05fb8de7a759c85b1172f | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/69bbb9058914463f48e2ad4b23b12f1ae2e3e95a | ORPH sh4 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/0a98b2704d5e77070d0cb999e748cabc0dd796ba | ORPH nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9b17cb0955d58b621697fa7a56776fa09c14da05 | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/71f57dae23cb1dcc84bc403726cabc98c3a872b0 | armeb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/d31b48a102fbdf2e24ed908139d584794e0f7ca3 | ORPH sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/2efce22efdbda7f0e796dc9c3d270deaf80908b2 | ORPH mips64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/bec76520bf9020b494db93a90d5d74489df1e928 | powerpc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/498572f7abc1dbae252ff7c459f80ea8986edc8d | ORPH microblazeel | musepack-r475 | NOK | http://autobuild.buildroot.net/results/632a86e4e471a58e518ce55669e7b4d0b35703d9 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/ea296af38e0473d17da3f0d8080e074aebe90ef6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/7619319958cce7c7197cb6bdf0cc4a2e4f0a5221 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/7db2305156bae5d8e012d7d3fee0efbc6982cf75 | sparc | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/43f1295a1634804a4fa577fb9f8a8a28723f83de | mipsel | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/4e4fbf8423faa29ee62c5189c5b0a562998cf687 | m68k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/a3de8db161d71261dbeef02d0a959fe2d51eedf3 | arc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/eef13dd87ccf488948f448cf53b9951c3ba3fc90 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/a8c07e4458f6426dfb6626679e9b27d141adaad8 | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/34cfa0d6df7a0e182a62b8039ee45c99b4e3ada7 | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/83691c2c05436d5b15955297ca7a341a58c7a88d | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/8aa144acf1566a932ab1dbf13f689474c40a5d3c | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1bc4d3cccedaffd410c040a6abb15afa722d52ed | ORPH microblazeel | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/6c29ca77ee776897d8c41e6d529fa6ba9e102cc7 | ORPH arc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/03c5a53f90c6e220bbfaa6e0fd6003722b2dc0a4 | ORPH xtensa | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/02966b70723d46cf3ee62c5b4d97359aa5b3db02 | ORPH or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/f9e7900d501ebff948ec7308ac7799e07d586936 | sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/45a57f169631b1317e6e9eb0938719078786a67f | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/810e955c26ea8f6c0627d50cc23e9e8378d51b80 | ORPH i686 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/7bcf5a314c636d380222bd954b3decf0f9f8fb82 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ee0fad6e5711f201b3601b08b3ef4902cd430453 | sh4 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7c3d7954aa9628e7ae25943c8f4265b8a7ff7c9b | microblaze | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/a52b279b2431807fb4e2a6f996ab54a85911ce92 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/c8850a579a83be6d693a15e2ab914549dbe901bd | aarch64 | qt5base-2ffb7ad8a1079a0444b... | NOK | http://autobuild.buildroot.net/results/48a99ad1c80f914020640e4465bc4722ae988931 | riscv64 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/cd9812aaaad1bef79f6916051145e9814c1c93ee | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/2600d8e8d301df6c49bced9aefb33a90cbfbf101 | mipsel | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/c48ccb2547d0370439571cb7c5794a6385489e83 | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/64df0c9f5dca57714e506455c96b6263bea57471 | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/749a8e4989ca7c9df1c78a95cfd55faf8715763a | ORPH mips | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0536730c18546b817a882dc3b655bd5efac9385c | ORPH mipsel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/02bfebecd1cc56fa65029b1624b5eff64cc81d2f | ORPH arm | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/a5238d4ebf8bf381ff5266ec94e107d29e988146 | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/16abd495f900f0ccc959f75897d212bf3bd61557 | sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/83791d2e4bef81bc74bc5259a46c5b4964b9772a | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a90ce64e8be9fcf1ba720f0a7d49c7354a5b8a95 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e737c0cf7b25e429c74f22bc35169d770fd914e3 | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a61e0e7b0eca6702905f2bf092f2fda0dc7d5308 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/937969677a707d04b7cb84378194b3c80613c465 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6a93fde13ab42715752ddeec12d31cd1257dced4 | ORPH arm | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9109d8a6dfb0f79188c63d05e684b7d6ba14af54 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1051e9683ed327db1ffc4054ab4593c4f1998be1 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/677d7e1bf02006d4559e3f6320615828ad8344ce | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/af8e0c0e878dce0e37b19821871200f8bea7f390 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/31b56ab5789551e29f217b09a969b597650f0af2 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/41d560caf65b049a076c59ac3fa81dfb40acba04 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/dafefedb7bd73025fd0e7e3bfa3bcaee4fef4c03 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e8ac6c0210cf7e367f67d89992c8003a1cebb0bd | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a44ba737dba79064098326e7a18790d99b69dfe3 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/95f7c354f530e8e7629e012330be57553b10f725 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/970dd5b1509f89914597b4b516df46ead9e18eea | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/32143d94241025d5def9f2120609f941ddac11c9 | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0955943d4c4e0c298484da13f22e6e7511302768 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fac211c158f3460427c6366ab788474d53ebac94 | ORPH aarch64 | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/6a8e5b4eb2f0fe6f6ed5f08774006a1c25a823e5 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/f788035e0748c06cf46671d200b19dc0e3d9e0af | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0c0c165fb073235ba0d711cbc7115d3d034d8d34 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/385923d51ba704f44afb3b74a9df7ea79b0ea36a | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9b134dab0c09ebba516f2a27da42a887aa87016a | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8543720b3da981ddd57f855251fbff2534f6bdd5 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5058089923f4bbed11f1d6a8a21f72981b0baaf7 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cc06ddf8c4387fdbd5390d09263c88655a496c61 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9b245bc9e999f16ec50af7dddd399493a7e29d62 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/d07cebae2d5b0354e691c686dfcdfa7222ce1f97 | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/ebf1e6d4a6e335b347100d59dae717b7c48e3835 | ORPH mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/eec65adda926aa9dca86319fc348a5d73db5483d | ORPH powerpc64le | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/226d3826c4d845dccb1092da88d2882db98b009b | aarch64_be | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/2d81499251623a55878167d64383c6f610514d53 | xtensa | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/bfe3b131934fd2a3ca88ef75ed1fadfbd426713a | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0348066e22012a229c94ae703cab8a8c631b1225 | aarch64_be | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/a3c57997f4bc2675a40980ee7207949e7d59a57a | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/874cf2f0927325df1d08e96bc4ee1e837ff579ae | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/09cc99aca93dc4e83db1db5aefdc0ddadd4d79a9 | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/288634c00e8338224206e37bbc59a9b009c4482e | arc | unknown | NOK | http://autobuild.buildroot.net/results/c8cdc22a6f05b8e2bd26a0352c6b7553e0dd05a0 | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/f0fbd99bbc12f1d229dccf43bec4cdb581c1e1c1 | ORPH or1k | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/b1fe1e4a8e6c98d76f5d8ec4de7e50dee34b5511 | microblazeel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/f9ac0a5cb43fef9578154aca5ea91eb8a3964d28 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/607596d4ec68af11786b43ea1074dbc62e347bd8 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/31880dd0cfa331c5652b64c86c7ba5823b2afe47 | Classification of failures by reason for 2022.02.x -------------------------------------------------- host-go-1.17.13 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | host-go-1.17.13 | NOK | http://autobuild.buildroot.net/results/69455bf4f986a45ae55175adfb20d29e13a8555e | Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 dropbear-2022.82 | 1 frr-8.2.2 | 1 glibc-2.35-134-gb6aade18a7e... | 1 host-gcc-final-11.3.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-go-1.18.6 | 1 linux-5.17.15 | 1 perl-5.34.1 | 1 tealdeer-1.5.0 | 1 unknown | 1 xvisor-0.3.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/8d7bebb9c1c483d137c9c9c82d1ecccbf0257773 | arc | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/792fa0e37d020806baaadf76bac8c138b115938b | nios2 | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/e147a37feec830966bcdad0cdade270a3a5ff0b6 | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a1211339484e092d9e3c83f45128c7411ad7add3 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/f9f73d9da7709f16c674460fe6880b5f392725cc | ORPH powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/826d262ac23863c8452b0ba6713a2c57fb9fade5 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/87b6081af9cb348385e74bef9fa04a9ee2c209e4 | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/75ba643f56afabf1c9b419438855d231f1e5dcab | mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/898ea46c022be026b43214e77e91f560a4317918 | ORPH aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ba9ec4a3ad2847c97098c7c4f1ea188774520934 | mips | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/591136f6547f29e842a23d95f257deae6d3a5742 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/7e11b8615cbf01c79ec31bb0662f4b7d1e02d650 | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/22aedcd4bddd0ef9f9275107e7af2c37ce2fe212 | Gitlab CI results for 2022-10-10 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422047 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422048 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422049 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422051 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422055 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422056 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422104 | ORPH ...c440fpMuslBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422662 | ORPH ...86i686MuslBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422826 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422836 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422841 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422111 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422113 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422115 | ORPH ...InitSystemBusyboxRoNet | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422080 | ORPH TestLuaLuaGD | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422144 | ORPH TestOci | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422073 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3148422444 | ORPH -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Tue Oct 11 06:26:47 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Tue, 11 Oct 2022 08:26:47 +0200 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture Message-ID: <20221011062647.741292-1-marcus.folkesson@gmail.com> libarchive is needed when building for s390x. Introduced in this patch: c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case Fixes: http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ Signed-off-by: Marcus Folkesson --- package/libostree/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libostree/Config.in b/package/libostree/Config.in index 14ae4da4c8..a36e12ddde 100644 --- a/package/libostree/Config.in +++ b/package/libostree/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() depends on !BR2_TOOLCHAIN_USES_MUSL select BR2_PACKAGE_E2FSPROGS + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBGPG_ERROR select BR2_PACKAGE_LIBGPGME -- 2.37.1 From nunes.erico at gmail.com Tue Oct 11 08:49:46 2022 From: nunes.erico at gmail.com (Erico Nunes) Date: Tue, 11 Oct 2022 10:49:46 +0200 Subject: [Buildroot] [PATCH] package/efivar: fix build with musl libc Message-ID: <20221011084946.2276735-1-nunes.erico@gmail.com> Backport upstream patch to fix build with musl libc. This patch is only a requirement since efivar 38 and was applied upstream shortly after the 38 version tag. Fixes: http://autobuild.buildroot.net/results/c49d894b109d68e2624074eab8b939fefa3b42ef/ Signed-off-by: Erico Nunes --- ...04-efisecdb-fix-build-with-musl-libc.patch | 185 ++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100644 package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch diff --git a/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch b/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch new file mode 100644 index 0000000000..9815a9d0cf --- /dev/null +++ b/package/efivar/0004-efisecdb-fix-build-with-musl-libc.patch @@ -0,0 +1,185 @@ +From cece3ffd5be2f8641eb694513f2b73e5eb97ffd3 Mon Sep 17 00:00:00 2001 +From: Natanael Copa +Date: Fri, 28 Jan 2022 12:13:30 +0100 +Subject: [PATCH] efisecdb: fix build with musl libc + +Refactor code to use POSIX atexit(3) instead of the GNU specific +on_exit(3). + +Resolves: #197 +Resolves: #202 +Signed-off-by: Natanael Copa +[Erico: backport from upstream commit +cece3ffd5be2f8641eb694513f2b73e5eb97ffd3] +Signed-off-by: Erico Nunes +--- + src/compiler.h | 2 -- + src/efisecdb.c | 68 +++++++++++++++++++------------------------------- + 2 files changed, 26 insertions(+), 44 deletions(-) + +diff --git a/src/compiler.h b/src/compiler.h +index e2f18f0..d95fb01 100644 +--- a/src/compiler.h ++++ b/src/compiler.h +@@ -7,8 +7,6 @@ + #ifndef COMPILER_H_ + #define COMPILER_H_ + +-#include +- + /* GCC version checking borrowed from glibc. */ + #if defined(__GNUC__) && defined(__GNUC_MINOR__) + # define GNUC_PREREQ(maj,min) \ +diff --git a/src/efisecdb.c b/src/efisecdb.c +index f882373..6bd5ad9 100644 +--- a/src/efisecdb.c ++++ b/src/efisecdb.c +@@ -25,6 +25,10 @@ + extern char *optarg; + extern int optind, opterr, optopt; + ++static efi_secdb_t *secdb = NULL; ++static list_t infiles; ++static list_t actions; ++ + struct hash_param { + char *name; + efi_secdb_type_t algorithm; +@@ -187,12 +191,11 @@ add_action(list_t *list, action_type_t action_type, const efi_guid_t *owner, + } + + static void +-free_actions(int status UNUSED, void *actionsp) ++free_actions(void) + { +- list_t *actions = (list_t *)actionsp; + list_t *pos, *tmp; + +- for_each_action_safe(pos, tmp, actions) { ++ for_each_action_safe(pos, tmp, &actions) { + action_t *action = list_entry(pos, action_t, list); + + list_del(&action->list); +@@ -202,12 +205,11 @@ free_actions(int status UNUSED, void *actionsp) + } + + static void +-free_infiles(int status UNUSED, void *infilesp) ++free_infiles(void) + { +- list_t *infiles = (list_t *)infilesp; + list_t *pos, *tmp; + +- for_each_ptr_safe(pos, tmp, infiles) { ++ for_each_ptr_safe(pos, tmp, &infiles) { + ptrlist_t *entry = list_entry(pos, ptrlist_t, list); + + list_del(&entry->list); +@@ -216,27 +218,12 @@ free_infiles(int status UNUSED, void *infilesp) + } + + static void +-maybe_free_secdb(int status UNUSED, void *voidp) ++maybe_free_secdb(void) + { +- efi_secdb_t **secdbp = (efi_secdb_t **)voidp; +- +- if (secdbp == NULL || *secdbp == NULL) ++ if (secdb == NULL) + return; + +- efi_secdb_free(*secdbp); +-} +- +-static void +-maybe_do_unlink(int status, void *filep) +-{ +- char **file = (char **)filep; +- +- if (status == 0) +- return; +- if (file == NULL || *file == NULL) +- return; +- +- unlink(*file); ++ efi_secdb_free(secdb); + } + + static void +@@ -323,15 +310,6 @@ parse_input_files(list_t *infiles, char **outfile, efi_secdb_t **secdb, + return status; + } + +-/* +- * These need to be static globals so that they're not on main's stack when +- * on_exit() fires. +- */ +-static efi_secdb_t *secdb = NULL; +-static list_t infiles; +-static list_t actions; +-static char *outfile = NULL; +- + int + main(int argc, char *argv[]) + { +@@ -351,6 +329,7 @@ main(int argc, char *argv[]) + bool do_sort_data = false; + bool sort_descending = false; + int status = 0; ++ char *outfile = NULL; + + const char sopts[] = ":aAc:dfg:h:i:Lo:rs:t:v?"; + const struct option lopts[] = { +@@ -376,10 +355,9 @@ main(int argc, char *argv[]) + INIT_LIST_HEAD(&infiles); + INIT_LIST_HEAD(&actions); + +- on_exit(free_actions, &actions); +- on_exit(free_infiles, &infiles); +- on_exit(maybe_free_secdb, &secdb); +- on_exit(maybe_do_unlink, &outfile); ++ atexit(free_actions); ++ atexit(free_infiles); ++ atexit(maybe_free_secdb); + + /* + * parse the command line. +@@ -587,24 +565,30 @@ sort_err: + outfd = open(outfile, flags, 0600); + if (outfd < 0) { + char *tmpoutfile = outfile; +- if (errno == EEXIST) +- outfile = NULL; ++ if (errno != EEXIST) ++ unlink(outfile); + err(1, "could not open \"%s\"", tmpoutfile); + } + + rc = ftruncate(outfd, 0); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + err(1, "could not truncate output file \"%s\"", outfile); ++ } + + void *output; + size_t size = 0; + rc = efi_secdb_realize(secdb, &output, &size); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + secdb_err(1, "could not realize signature list"); ++ } + + rc = write(outfd, output, size); +- if (rc < 0) ++ if (rc < 0) { ++ unlink(outfile); + err(1, "could not write signature list"); ++ } + + close(outfd); + xfree(output); +-- +2.37.3 + -- 2.37.3 From leo at yuriev.ru Tue Oct 11 11:11:10 2022 From: leo at yuriev.ru (Leonid Yuriev) Date: Tue, 11 Oct 2022 14:11:10 +0300 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-10 In-Reply-To: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> References: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> Message-ID: <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> Hi, Please fix the configuration error of toolchain for microblaze arch. I already wrote about this problem at the beginning of the summer, and then changed the diagnostic message to make the error more obvious. Basically, the failed assertion (see below) checks that the width of l_start end l_len fields of the struct flock are enough to hold values of off_t type. So, the libc in the toolchain is misconfigured or/and has wrong layout of headers, etc. In file included from /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:181: /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c: In function 'lck_op': /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:818:38: error: static assertion failed: "Support for large/64-bit-sized files is misconfigured for the target system and/or toolchain. Please fix it or at least disable it completely." ? 818 | #define STATIC_ASSERT_MSG(expr, msg) static_assert(expr, msg) ????? |????????????????????????????????????? ^~~~~~~~~~~~~ /home/buildroot/autobuild/instance-1/output-1/build/libmdbx-0.11.11/mdbx.c:30482:5: note: in expansion of macro 'STATIC_ASSERT_MSG' 30482 |???? STATIC_ASSERT_MSG(sizeof(off_t) <= sizeof(lock_op.l_start) && ????? |???? ^~~~~~~~~~~~~~~~~ Regards. Leonid. 11.10.2022 08:45, Thomas Petazzoni ?????: > Hello, > > Autobuilder failures > ==================== > > Below is a list of build failures reported by the Buildroot autobuilders > in relation to packages or CPU architectures you are in charge of. > Please help us improving the quality of Buildroot by investigating those > build failures and sending patches to fix them. > > Results for the 'master' branch > ------------------------------- > > Build failures related to your packages: > > arch | reason | url > -------------+--------------------------------+--------------------------------------------------------------------------------- > microblaze | libmdbx-0.11.11 | http://autobuild.buildroot.net/results/7259eb7ef9eae5702eb17ec228f4312c534981a7 > > > Thanks for your contribution to Buildroot! > From baruch at tkos.co.il Tue Oct 11 14:02:10 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:10 +0300 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> The Armada target does not provide platform level support for SSP. Fixes link failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' This error does not should up on CI jobs because SSP was effectively always disabled until the previous commit. Signed-off-by: Baruch Siach --- configs/solidrun_clearfog_gt_8k_defconfig | 1 + configs/solidrun_macchiatobin_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/solidrun_clearfog_gt_8k_defconfig b/configs/solidrun_clearfog_gt_8k_defconfig index bec4a7daccc6..30b1e17925d6 100644 --- a/configs/solidrun_clearfog_gt_8k_defconfig +++ b/configs/solidrun_clearfog_gt_8k_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y diff --git a/configs/solidrun_macchiatobin_defconfig b/configs/solidrun_macchiatobin_defconfig index 7d06313b03db..f388e37163aa 100644 --- a/configs/solidrun_macchiatobin_defconfig +++ b/configs/solidrun_macchiatobin_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y -- 2.35.1 From baruch at tkos.co.il Tue Oct 11 14:02:11 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:11 +0300 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: Add a patch to disable SSP. The toolchain enables SSP by default when one of BR2_SSP_ options is enabled. But ATF code for the Marvell platform does not provide the required low level routines. This leads to link time failure. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 Signed-off-by: Baruch Siach --- ...01-Makefile-disable-stack-protection.patch | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch diff --git a/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch new file mode 100644 index 000000000000..62b1000727f8 --- /dev/null +++ b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch @@ -0,0 +1,34 @@ +From 53e34e3bff26fcbb7cc14178fa9fc80e7a73d556 Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 11 Oct 2022 16:34:44 +0300 +Subject: [PATCH] Makefile: disable stack protection + +The Buildroot toolchain might enable stack protection by default. That +breaks linking because ATF does not provide the required __stack_chk +routines. + +The mv-ddr-marvell Makefile provides no way to add custom CFLAGS. Patch +Makefile to disable stack protection. + +Signed-off-by: Baruch Siach +--- +Upstream status: not applicable; Buildroot specific +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index 3f0dd89a7381..feae75cc16e4 100644 +--- a/Makefile ++++ b/Makefile +@@ -331,6 +331,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT) + CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4 + CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc + CFLAGS += -march=armv8-a -fpie ++CFLAGS += -fno-stack-protector + + # PLATFORM is set in ble/ble.mk + ifneq ($(findstring a80x0,$(PLATFORM)),) +-- +2.35.1 + -- 2.35.1 From baruch at tkos.co.il Tue Oct 11 14:02:09 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Tue, 11 Oct 2022 17:02:09 +0300 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support Message-ID: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is set to 0 unconditionally in make_helpers/defaults.mk, overwriting any environment set value. So we must pass ENABLE_STACK_PROTECTOR in MAKE_OPTS for it to be effective. But to avoid said build failure we can't pass ENABLE_STACK_PROTECTOR=0. Only pass ENABLE_STACK_PROTECTOR when BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. Cc: Dick Olsson Cc: Sergey Matyukevich Signed-off-by: Baruch Siach --- boot/arm-trusted-firmware/Config.in | 4 ---- boot/arm-trusted-firmware/arm-trusted-firmware.mk | 8 ++++++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index aa571502b345..5070849d9b43 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -226,10 +226,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL string - # While newer versions of TF-A support "none" as - # ENABLE_STACK_PROTECTOR value, older versions (e.g 2.0) only - # supported "0" to disable SSP. - default "0" if !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP default "default" if BR2_SSP_REGULAR default "strong" if BR2_SSP_STRONG default "all" if BR2_SSP_ALL diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 246c0699bb4a..34d7d80243d4 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -64,10 +64,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM) \ TARGET_BOARD=$(ARM_TRUSTED_FIRMWARE_TARGET_BOARD) +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ + ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) +endif + ARM_TRUSTED_FIRMWARE_MAKE_ENV += \ $(TARGET_MAKE_ENV) \ - $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") \ - ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) + $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") ifeq ($(BR2_ARM_CPU_ARMV7A),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ARM_ARCH_MAJOR=7 -- 2.35.1 From peter at korsgaard.com Tue Oct 11 18:43:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:43:37 +0200 Subject: [Buildroot] [git commit] package/nodejs: renumber patch 0001 to 0002 In-Reply-To: <20220925082044.312FD85FCB@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:18:48 +0200") References: <20220925082044.312FD85FCB@busybox.osuosl.org> Message-ID: <87sfjup5eu.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=f85e2cfc6e587d50b86f49b28469eae58a2ea2c7 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > There is already another 0001 patch. > Signed-off-by: Thomas Petazzoni Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:45:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:45:47 +0200 Subject: [Buildroot] [git commit] package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error In-Reply-To: <20220925082044.3B03185FCC@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:18:48 +0200") References: <20220925082044.3B03185FCC@busybox.osuosl.org> Message-ID: <87o7uip5b8.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Reported also via: > https://github.com/nodejs/node/issues/37441 > Patched in: > https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d > The error is: > ``` > ninja: Entering directory `out/Release' > ninja: error: obj.host/tools/v8_gypfiles/run_torque.ninja:1356: multiple rules generate gen/torque-generated/bit-fields.h [-w dupbuild=err] > make[2]: *** [Makefile:127: node] Error 1 > make[1]: *** [package/pkg-generic.mk:293: /output/build/nodejs-16.15.0/.stamp_built] Error 2 > make: *** [Makefile:84: _all] Error 2 > ``` > Fixes: > http://autobuild.buildroot.net/results/7fe9132236ee8e3a86dd97fe96ffee42990c2d19/ > Signed-off-by: Alexandru Ardelean > [Thomas: > - regenerate patch as a git formatted patch, add a link to the > original location, add my own SoB to it > - improve commit log] > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:48:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:48:04 +0200 Subject: [Buildroot] [git commit] package/nodejs: don't install nodejs host-tools In-Reply-To: <20220925082044.4E0E885FCE@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:38 +0200") References: <20220925082044.4E0E885FCE@busybox.osuosl.org> Message-ID: <87k056p57f.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=ec5589611ad79664bc5bf238cc786a65458f3c93 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > The target nodejs package is building those tools, and running them > under Qemu, so it is not necessary for the host variant to install > them. > Signed-off-by: Alexandru Ardelean > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:48:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:48:13 +0200 Subject: [Buildroot] [git commit] package/nodejs: improve 0001-add-qemu-wrapper-support.patch to fix build issue In-Reply-To: <20220925082044.445AB85FCD@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:12 +0200") References: <20220925082044.445AB85FCD@busybox.osuosl.org> Message-ID: <87fsfup576.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=cf0ddc89705af989393b1601bbf57d567a9a1b13 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since upstream commit 79da2534737bd090b7000beed68d225618606e53, > present since NodeJS 16.0.0, another call to the torque tool is done > in tools/v8_gypfiles/v8.gyp, but our patch to wrap calls to such tools > under Qemu forgot this addition. Due to this, the build of NodeJS is > broken since the bump to v16 in Buildroot commit > 07408779cc068041a2da6838fe077d1a679f1736 ("package/nodejs: bump to > 16.15.0"). This issue is not visible in the autobuilders as it was > hidden by a previous build issue, itself fixed by "package/nodejs: fix > 'Duplicate v8 target errors when cross-compiling' error". > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:34:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:34:23 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/nodejs: renumber patch 0001 to 0002 Message-ID: <20221011184828.AB2B486B93@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0172690bcd7213624b639c5d7f6e1faeb7c76bbc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x There is already another 0001 patch. Signed-off-by: Thomas Petazzoni (cherry picked from commit f85e2cfc6e587d50b86f49b28469eae58a2ea2c7) Signed-off-by: Peter Korsgaard --- ...ace-support.patch => 0002-check-if-uclibc-has-backtrace-support.patch} | 0 1 file changed, 0 insertions(+), 0 deletions(-) diff --git a/package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch similarity index 100% rename from package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch rename to package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch From peter at korsgaard.com Tue Oct 11 18:53:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:23 +0200 Subject: [Buildroot] [git commit] package/nodejs: build host-nodejs only if we're installing modules with NPM In-Reply-To: <20220925082044.5702885FCF@busybox.osuosl.org> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 10:19:49 +0200") References: <20220925082044.5702885FCF@busybox.osuosl.org> Message-ID: <87bkqip4yk.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=1facb09b94bf806b301868539185c0ff9ddffee2 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Building host-nodejs is no longer needed to build the target nodejs, > unless npm is needed during the build, which happens when > BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL is used. > We need to make that host-python3 is built with bz2 and ssl > support. Until now, it was done by the BR2_PACKAGE_HOST_NODEJS option, > but now that the target nodejs no longer depends on host-nodejs, we > are no longer guaranteed to have a host-python3 with bz2/ssl. To make > sure it is the case, we select the relevant options from > BR2_PACKAGE_NODEJS. > Signed-off-by: Alexandru Ardelean > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:53:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:46 +0200 Subject: [Buildroot] [PATCH 1/4] package/nodejs: fixup qemu dependencies In-Reply-To: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> (Thomas Petazzoni's message of "Sun, 25 Sep 2022 19:19:29 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> Message-ID: <877d16p4xx.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > Commit 1facb09b94bf806b301868539185c0ff9ddffee2 ("package/nodejs: > build host-nodejs only if we're installing modules with NPM") forgot > to account for the dependency on Qemu. Now that nodejs no longer > depends on host-nodejs, but needs host-qemu, we need to make sure that > nodejs selects the relevant BR2_PACKAGE_HOST_QEMU options. > So this patch: > - Drops the dependency of BR2_PACKAGE_NODEJS_ARCH_SUPPORTS on > BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET, which was incorrect: we > don't care about running Qemu on the target. We care about > host-qemu supporting the emulation of the target architecture, > which is what BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS is for. > - Adds the dependency to the relevant BR2_PACKAGE_HOST_QEMU options > to BR2_PACKAGE_NODEJS, so that host-qemu is built with the > appropriate features needed to build the target nodejs. > - Removes the qemu related dependencies from host-nodejs, which does > not need Qemu at all. > Without this change the build of nodejs without npm enabled is broken > as the host-qemu that gets built does not have all the features that > are needed. There are no autobuild failures at this point, however. > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 18:18:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:18:41 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: don't install nodejs host-tools Message-ID: <20221011185356.57D8386BD3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a0771a6b36aeb6f4d9d3b4d7d13377e47728c9b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x The target nodejs package is building those tools, and running them under Qemu, so it is not necessary for the host variant to install them. Signed-off-by: Alexandru Ardelean Signed-off-by: Thomas Petazzoni (cherry picked from commit ec5589611ad79664bc5bf238cc786a65458f3c93) Signed-off-by: Peter Korsgaard --- package/nodejs/nodejs.mk | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 3154dcd7ec..92a9493e25 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -102,13 +102,6 @@ define HOST_NODEJS_CONFIGURE_CMDS --ninja endef -NODEJS_HOST_TOOLS_V8 = \ - torque \ - gen-regexp-special-case \ - bytecode_builtins_list_generator -NODEJS_HOST_TOOLS_NODE = mkcodecache -NODEJS_HOST_TOOLS = $(NODEJS_HOST_TOOLS_V8) $(NODEJS_HOST_TOOLS_NODE) - HOST_NODEJS_CXXFLAGS = $(HOST_CXXFLAGS) define HOST_NODEJS_BUILD_CMDS @@ -121,10 +114,6 @@ define HOST_NODEJS_INSTALL_CMDS $(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \ $(MAKE) -C $(@D) install \ $(HOST_NODEJS_MAKE_OPTS) - - $(foreach f,$(NODEJS_HOST_TOOLS), \ - $(INSTALL) -m755 -D $(@D)/out/Release/$(f) $(HOST_DIR)/bin/$(f) - ) endef ifeq ($(BR2_i386),y) From peter at korsgaard.com Tue Oct 11 18:15:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:15:36 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error Message-ID: <20221011185356.4320D86BD1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a712b5f61b54a72d5bdc4076a85f76011fd8a50f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Reported also via: https://github.com/nodejs/node/issues/37441 Patched in: https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d The error is: ``` ninja: Entering directory `out/Release' ninja: error: obj.host/tools/v8_gypfiles/run_torque.ninja:1356: multiple rules generate gen/torque-generated/bit-fields.h [-w dupbuild=err] make[2]: *** [Makefile:127: node] Error 1 make[1]: *** [package/pkg-generic.mk:293: /output/build/nodejs-16.15.0/.stamp_built] Error 2 make: *** [Makefile:84: _all] Error 2 ``` Fixes: http://autobuild.buildroot.net/results/7fe9132236ee8e3a86dd97fe96ffee42990c2d19/ Signed-off-by: Alexandru Ardelean [Thomas: - regenerate patch as a git formatted patch, add a link to the original location, add my own SoB to it - improve commit log] Signed-off-by: Thomas Petazzoni (cherry picked from commit 5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7) Signed-off-by: Peter Korsgaard --- ...3-include-obj-name-in-shared-intermediate.patch | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch new file mode 100644 index 0000000000..b439c66a0c --- /dev/null +++ b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch @@ -0,0 +1,42 @@ +From e6e691d093de440e0f408d48971e2b7332a07d58 Mon Sep 17 00:00:00 2001 +From: Min RK +Date: Fri, 19 Feb 2021 11:57:04 +0100 +Subject: [PATCH] include obj name in shared intermediate + +avoids duplicate ninja rules for v8 used in host and target + +From: https://github.com/minrk/node/commit/5e533cb943eef68b270f55f0cba02c0ec67c699d +Signed-off-by: Thomas Petazzoni +--- + tools/gyp/pylib/gyp/generator/ninja.py | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +diff --git a/tools/gyp/pylib/gyp/generator/ninja.py b/tools/gyp/pylib/gyp/generator/ninja.py +index d173bf2299..efaeee53ef 100644 +--- a/tools/gyp/pylib/gyp/generator/ninja.py ++++ b/tools/gyp/pylib/gyp/generator/ninja.py +@@ -42,7 +42,7 @@ generator_default_variables = { + # the start of a string, while $| is used for variables that can appear + # anywhere in a string. + "INTERMEDIATE_DIR": "$!INTERMEDIATE_DIR", +- "SHARED_INTERMEDIATE_DIR": "$!PRODUCT_DIR/gen", ++ "SHARED_INTERMEDIATE_DIR": "$!PRODUCT_DIR/$|OBJ/gen", + "PRODUCT_DIR": "$!PRODUCT_DIR", + "CONFIGURATION_NAME": "$|CONFIGURATION_NAME", + # Special variables that may be used by gyp 'rule' targets. +@@ -285,6 +285,12 @@ class NinjaWriter: + CONFIGURATION_NAME = "$|CONFIGURATION_NAME" + path = path.replace(CONFIGURATION_NAME, self.config_name) + ++ obj = "obj" ++ if self.toolset != "target": ++ obj += "." + self.toolset ++ ++ path = path.replace("$|OBJ", obj) ++ + return path + + def ExpandRuleVariables(self, path, root, dirname, source, ext, name): +-- +2.37.3 + From peter at korsgaard.com Tue Oct 11 18:11:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:11:52 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: renumber patch 0001 to 0002 Message-ID: <20221011185356.392AE86BCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b0700755ae1d564581f6e224dca6f9dc1c0a496c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x There is already another 0001 patch. Signed-off-by: Thomas Petazzoni (cherry picked from commit f85e2cfc6e587d50b86f49b28469eae58a2ea2c7) Signed-off-by: Peter Korsgaard --- ...ace-support.patch => 0002-check-if-uclibc-has-backtrace-support.patch} | 0 1 file changed, 0 insertions(+), 0 deletions(-) diff --git a/package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch similarity index 100% rename from package/nodejs/0001-check-if-uclibc-has-backtrace-support.patch rename to package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch From peter at korsgaard.com Tue Oct 11 18:15:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:15:49 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: improve 0001-add-qemu-wrapper-support.patch to fix build issue Message-ID: <20221011185356.4D83286BD2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3a3521a38060070b25f5e1af849d8c2a76c4c512 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since upstream commit 79da2534737bd090b7000beed68d225618606e53, present since NodeJS 16.0.0, another call to the torque tool is done in tools/v8_gypfiles/v8.gyp, but our patch to wrap calls to such tools under Qemu forgot this addition. Due to this, the build of NodeJS is broken since the bump to v16 in Buildroot commit 07408779cc068041a2da6838fe077d1a679f1736 ("package/nodejs: bump to 16.15.0"). This issue is not visible in the autobuilders as it was hidden by a previous build issue, itself fixed by "package/nodejs: fix 'Duplicate v8 target errors when cross-compiling' error". Signed-off-by: Thomas Petazzoni (cherry picked from commit cf0ddc89705af989393b1601bbf57d567a9a1b13) Signed-off-by: Peter Korsgaard --- package/nodejs/0001-add-qemu-wrapper-support.patch | 37 ++++++++++++++-------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/package/nodejs/0001-add-qemu-wrapper-support.patch b/package/nodejs/0001-add-qemu-wrapper-support.patch index 1368ca5a38..8d09601158 100644 --- a/package/nodejs/0001-add-qemu-wrapper-support.patch +++ b/package/nodejs/0001-add-qemu-wrapper-support.patch @@ -1,4 +1,4 @@ -From fa09fa3ad6a21ae0b35fb860f76d1762e5f29972 Mon Sep 17 00:00:00 2001 +From c6103ceab64b73c1a25ece3315ea8f52507c2bfe Mon Sep 17 00:00:00 2001 From: Adam Duskett Date: Mon, 27 Sep 2021 12:55:09 -0700 Subject: [PATCH] add qemu-wrapper support @@ -17,15 +17,15 @@ host-builds. Signed-off-by: Adam Duskett --- - node.gyp | 4 ++-- - tools/v8_gypfiles/v8.gyp | 8 ++++---- - 2 files changed, 6 insertions(+), 6 deletions(-) + node.gyp | 4 ++-- + tools/v8_gypfiles/v8.gyp | 10 +++++----- + 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/node.gyp b/node.gyp -index 8ba0dfeb..c77f6f7d 100644 +index 74e9f9cc2e..c3eaab6c92 100644 --- a/node.gyp +++ b/node.gyp -@@ -491,7 +491,7 @@ +@@ -295,7 +295,7 @@ 'action_name': 'run_mkcodecache', 'process_outputs_as_sources': 1, 'inputs': [ @@ -34,7 +34,7 @@ index 8ba0dfeb..c77f6f7d 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_code_cache.cc', -@@ -516,7 +516,7 @@ +@@ -320,7 +320,7 @@ 'action_name': 'node_mksnapshot', 'process_outputs_as_sources': 1, 'inputs': [ @@ -44,10 +44,10 @@ index 8ba0dfeb..c77f6f7d 100644 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_snapshot.cc', diff --git a/tools/v8_gypfiles/v8.gyp b/tools/v8_gypfiles/v8.gyp -index 48ec392b..f9bb0fbe 100644 +index 39b96803c7..9321982ea4 100644 --- a/tools/v8_gypfiles/v8.gyp +++ b/tools/v8_gypfiles/v8.gyp -@@ -220,7 +220,7 @@ +@@ -68,7 +68,7 @@ { 'action_name': 'run_torque_action', 'inputs': [ # Order matters. @@ -56,7 +56,16 @@ index 48ec392b..f9bb0fbe 100644 '<@(torque_files)', ], 'outputs': [ -@@ -351,7 +351,7 @@ +@@ -99,7 +99,7 @@ + '<@(torque_outputs_inc)', + ], + 'action': [ +- '<(PRODUCT_DIR)/<(EXECUTABLE_PREFIX)torque<(EXECUTABLE_SUFFIX)', ++ @MAYBE_WRAPPER@ '<(PRODUCT_DIR)/<(EXECUTABLE_PREFIX)torque<(EXECUTABLE_SUFFIX)', + '-o', '<(SHARED_INTERMEDIATE_DIR)/torque-generated', + '-v8-root', '<(V8_ROOT)', + '<@(torque_files_without_v8_root)', +@@ -211,7 +211,7 @@ { 'action_name': 'generate_bytecode_builtins_list_action', 'inputs': [ @@ -65,7 +74,7 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(generate_bytecode_builtins_list_output)', -@@ -533,7 +533,7 @@ +@@ -395,7 +395,7 @@ ], }, 'inputs': [ @@ -74,7 +83,7 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(INTERMEDIATE_DIR)/snapshot.cc', -@@ -1448,7 +1448,7 @@ +@@ -1503,7 +1503,7 @@ { 'action_name': 'run_gen-regexp-special-case_action', 'inputs': [ @@ -83,6 +92,6 @@ index 48ec392b..f9bb0fbe 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/src/regexp/special-case.cc', --- -2.31.1 +-- +2.37.3 From peter at korsgaard.com Tue Oct 11 18:53:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:53:10 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: fixup qemu dependencies Message-ID: <20221011185356.6D78086BCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=72c6d2f54acc60d597b602d8dd3d650fc49848ba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Commit 1facb09b94bf806b301868539185c0ff9ddffee2 ("package/nodejs: build host-nodejs only if we're installing modules with NPM") forgot to account for the dependency on Qemu. Now that nodejs no longer depends on host-nodejs, but needs host-qemu, we need to make sure that nodejs selects the relevant BR2_PACKAGE_HOST_QEMU options. So this patch: - Drops the dependency of BR2_PACKAGE_NODEJS_ARCH_SUPPORTS on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET, which was incorrect: we don't care about running Qemu on the target. We care about host-qemu supporting the emulation of the target architecture, which is what BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS is for. - Adds the dependency to the relevant BR2_PACKAGE_HOST_QEMU options to BR2_PACKAGE_NODEJS, so that host-qemu is built with the appropriate features needed to build the target nodejs. - Removes the qemu related dependencies from host-nodejs, which does not need Qemu at all. Without this change the build of nodejs without npm enabled is broken as the host-qemu that gets built does not have all the features that are needed. There are no autobuild failures at this point, however. Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit a88ba1548a50d5599e0156d66063dd71545f910b) Signed-off-by: Peter Korsgaard --- package/nodejs/Config.in | 4 +++- package/nodejs/Config.in.host | 4 ---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 8d0bd8fd60..5375dfeacd 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -6,7 +6,7 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 - depends on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET + depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS comment "nodejs needs a toolchain w/ C++, dynamic library, NPTL, gcc >= 7, wchar, host gcc >= 8" depends on BR2_USE_MMU @@ -31,6 +31,8 @@ config BR2_PACKAGE_NODEJS select BR2_PACKAGE_HOST_PYTHON3 select BR2_PACKAGE_HOST_PYTHON3_BZIP2 select BR2_PACKAGE_HOST_PYTHON3_SSL + select BR2_PACKAGE_HOST_QEMU + select BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE select BR2_PACKAGE_C_ARES select BR2_PACKAGE_LIBUV select BR2_PACKAGE_ZLIB diff --git a/package/nodejs/Config.in.host b/package/nodejs/Config.in.host index 4ceaf0c73e..f7f2b80a9b 100644 --- a/package/nodejs/Config.in.host +++ b/package/nodejs/Config.in.host @@ -1,12 +1,9 @@ config BR2_PACKAGE_HOST_NODEJS bool "host nodejs" - depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS depends on BR2_HOST_GCC_AT_LEAST_8 select BR2_PACKAGE_HOST_PYTHON3 select BR2_PACKAGE_HOST_PYTHON3_BZIP2 select BR2_PACKAGE_HOST_PYTHON3_SSL - select BR2_PACKAGE_HOST_QEMU - select BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE help Event-driven I/O server-side JavaScript environment based on V8. @@ -14,5 +11,4 @@ config BR2_PACKAGE_HOST_NODEJS http://nodejs.org/ comment "host nodejs needs a host gcc >= 8" - depends on BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS depends on !BR2_HOST_GCC_AT_LEAST_8 From peter at korsgaard.com Tue Oct 11 18:18:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 20:18:58 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: build host-nodejs only if we're installing modules with NPM Message-ID: <20221011185356.6315186BD4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b2c7ad1fc25ddf430ddf38aa75039bf7b211ab4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Building host-nodejs is no longer needed to build the target nodejs, unless npm is needed during the build, which happens when BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL is used. We need to make that host-python3 is built with bz2 and ssl support. Until now, it was done by the BR2_PACKAGE_HOST_NODEJS option, but now that the target nodejs no longer depends on host-nodejs, we are no longer guaranteed to have a host-python3 with bz2/ssl. To make sure it is the case, we select the relevant options from BR2_PACKAGE_NODEJS. Signed-off-by: Alexandru Ardelean Signed-off-by: Thomas Petazzoni (cherry picked from commit 1facb09b94bf806b301868539185c0ff9ddffee2) Signed-off-by: Peter Korsgaard --- package/nodejs/Config.in | 5 ++++- package/nodejs/nodejs.mk | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 016aeb4e1a..8d0bd8fd60 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -27,7 +27,10 @@ config BR2_PACKAGE_NODEJS # uses dlopen(). On ARMv5, we could technically support static # linking, but that's too much of a corner case to support it. depends on !BR2_STATIC_LIBS - select BR2_PACKAGE_HOST_NODEJS + select BR2_PACKAGE_HOST_NODEJS if BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL != "" + select BR2_PACKAGE_HOST_PYTHON3 + select BR2_PACKAGE_HOST_PYTHON3_BZIP2 + select BR2_PACKAGE_HOST_PYTHON3_SSL select BR2_PACKAGE_C_ARES select BR2_PACKAGE_LIBUV select BR2_PACKAGE_ZLIB diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 92a9493e25..e9fe96812f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -8,7 +8,6 @@ NODEJS_VERSION = 16.16.0 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ - host-nodejs \ host-ninja \ host-pkgconf \ host-python3 \ @@ -240,6 +239,7 @@ NPM = $(TARGET_CONFIGURE_OPTS) \ # We can only call NPM if there's something to install. # ifneq ($(NODEJS_MODULES_LIST),) +NODEJS_DEPENDENCIES += host-nodejs define NODEJS_INSTALL_MODULES # If you're having trouble with module installation, adding -d to the # npm install call below and setting npm_config_rollback=false can both From peter at korsgaard.com Tue Oct 11 19:19:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:19:53 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> (Thomas Petazzoni via buildroot's message of "Sun, 25 Sep 2022 19:19:30 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> Message-ID: <8735bup3qe.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > This is currently the latest version in the v16.x branch. > Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations > to resolve conflicts with other unrelated upstream changes. The other > patches are simply refreshed. > The license file is updates due to: > - Reformatting changes > - Addition of the mention of some files being under GPLv3, but it's > only the autoconf machinery: aclocal.m4 and config.guess, so it's > not relevant to add in our LICENSE variable. > - Addition of the mention of another file being under the MIT > license (install-sh), and MIT is already listed, and this file is > anyway only part of the autoconf machinery. > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 19:23:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:23:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/redis: security bump to v7.0.5 In-Reply-To: <20220926140252.2f775240@windsurf> (Thomas Petazzoni's message of "Mon, 26 Sep 2022 14:02:52 +0200") References: <20220926101724.1989377-1-titouanchristophe@gmail.com> <20220926140252.2f775240@windsurf> Message-ID: <87y1tmnp0k.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > On Mon, 26 Sep 2022 12:17:24 +0200 > Titouan Christophe wrote: >> From the release notes: >> (https://github.com/redis/redis/blob/7.0.5/00-RELEASENOTES) >> >> ================================================================================ >> Redis 7.0.5 Released Wed Sep 21 20:00:00 IST 2022 >> ================================================================================ >> >> Upgrade urgency: SECURITY, contains fixes to security issues. >> >> Security Fixes: >> * (CVE-2022-35951) Executing a XAUTOCLAIM command on a stream key in a specific >> state, with a specially crafted COUNT argument, may cause an integer overflow, >> a subsequent heap overflow, and potentially lead to remote code execution. >> The problem affects Redis versions 7.0.0 or newer >> [reported by Xion (SeungHyun Lee) of KAIST GoN]. >> >> Signed-off-by: Titouan Christophe >> --- >> package/redis/redis.hash | 2 +- >> package/redis/redis.mk | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) > Applied to master, thanks. Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 11 19:17:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:17:39 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/nodejs: bump to v16.17.1 Message-ID: <20221011192552.9109086BD8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0c058e99320ef50390144140122d47225499a972 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is currently the latest version in the v16.x branch. Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations to resolve conflicts with other unrelated upstream changes. The other patches are simply refreshed. The license file is updates due to: - Reformatting changes - Addition of the mention of some files being under GPLv3, but it's only the autoconf machinery: aclocal.m4 and config.guess, so it's not relevant to add in our LICENSE variable. - Addition of the mention of another file being under the MIT license (install-sh), and MIT is already listed, and this file is anyway only part of the autoconf machinery. Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit a8a65d0951e4c93fbba8041ce8e7db1ba8809edc) Signed-off-by: Peter Korsgaard --- package/nodejs/0001-add-qemu-wrapper-support.patch | 28 +++++++++++----------- ...002-check-if-uclibc-has-backtrace-support.patch | 6 ++--- ...3-include-obj-name-in-shared-intermediate.patch | 4 ++-- package/nodejs/nodejs.hash | 6 ++--- package/nodejs/nodejs.mk | 2 +- 5 files changed, 23 insertions(+), 23 deletions(-) diff --git a/package/nodejs/0001-add-qemu-wrapper-support.patch b/package/nodejs/0001-add-qemu-wrapper-support.patch index 8d09601158..184f3d19b7 100644 --- a/package/nodejs/0001-add-qemu-wrapper-support.patch +++ b/package/nodejs/0001-add-qemu-wrapper-support.patch @@ -1,4 +1,4 @@ -From c6103ceab64b73c1a25ece3315ea8f52507c2bfe Mon Sep 17 00:00:00 2001 +From 1f6c55d7318e7075169004b4314708f4766ec193 Mon Sep 17 00:00:00 2001 From: Adam Duskett Date: Mon, 27 Sep 2021 12:55:09 -0700 Subject: [PATCH] add qemu-wrapper support @@ -22,10 +22,10 @@ Signed-off-by: Adam Duskett 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/node.gyp b/node.gyp -index 74e9f9cc2e..c3eaab6c92 100644 +index 97cdbb531d..db5cf51ce6 100644 --- a/node.gyp +++ b/node.gyp -@@ -295,7 +295,7 @@ +@@ -319,7 +319,7 @@ 'action_name': 'run_mkcodecache', 'process_outputs_as_sources': 1, 'inputs': [ @@ -34,17 +34,17 @@ index 74e9f9cc2e..c3eaab6c92 100644 ], 'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/node_code_cache.cc', -@@ -320,7 +320,7 @@ - 'action_name': 'node_mksnapshot', - 'process_outputs_as_sources': 1, - 'inputs': [ -- '<(node_mksnapshot_exec)', -+ @MAYBE_WRAPPER@ '<(node_mksnapshot_exec)', - ], - 'outputs': [ - '<(SHARED_INTERMEDIATE_DIR)/node_snapshot.cc', +@@ -346,7 +346,7 @@ + 'action_name': 'node_mksnapshot', + 'process_outputs_as_sources': 1, + 'inputs': [ +- '<(node_mksnapshot_exec)', ++ @MAYBE_WRAPPER@ '<(node_mksnapshot_exec)', + '<(node_snapshot_main)', + ], + 'outputs': [ diff --git a/tools/v8_gypfiles/v8.gyp b/tools/v8_gypfiles/v8.gyp -index 39b96803c7..9321982ea4 100644 +index 73099a03e4..88ca91efb4 100644 --- a/tools/v8_gypfiles/v8.gyp +++ b/tools/v8_gypfiles/v8.gyp @@ -68,7 +68,7 @@ @@ -83,7 +83,7 @@ index 39b96803c7..9321982ea4 100644 ], 'outputs': [ '<(INTERMEDIATE_DIR)/snapshot.cc', -@@ -1503,7 +1503,7 @@ +@@ -1505,7 +1505,7 @@ { 'action_name': 'run_gen-regexp-special-case_action', 'inputs': [ diff --git a/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch index 079bbb4366..367b9fb8d5 100644 --- a/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch +++ b/package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch @@ -1,4 +1,4 @@ -From 7c69553d7275bbcaa88fada8ccd0d2d9f787e1ad Mon Sep 17 00:00:00 2001 +From f1a15cea9a47d0a9b0ae78fb22fef3a268e355ad Mon Sep 17 00:00:00 2001 From: Martin Bark Date: Sat, 4 Mar 2017 20:41:40 +0000 Subject: [PATCH] check if uclibc has backtrace support @@ -9,7 +9,7 @@ Signed-off-by: Martin Bark 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/deps/v8/src/base/debug/stack_trace_posix.cc b/deps/v8/src/base/debug/stack_trace_posix.cc -index 87c0a73..d2c182a 100644 +index 270f1ca4e0..5227e88671 100644 --- a/deps/v8/src/base/debug/stack_trace_posix.cc +++ b/deps/v8/src/base/debug/stack_trace_posix.cc @@ -25,7 +25,7 @@ @@ -22,5 +22,5 @@ index 87c0a73..d2c182a 100644 #endif -- -2.7.4 +2.37.3 diff --git a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch index b439c66a0c..5b44e6c400 100644 --- a/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch +++ b/package/nodejs/0003-include-obj-name-in-shared-intermediate.patch @@ -1,4 +1,4 @@ -From e6e691d093de440e0f408d48971e2b7332a07d58 Mon Sep 17 00:00:00 2001 +From af47d317e5ae12978c1cdc40627008ada144f98b Mon Sep 17 00:00:00 2001 From: Min RK Date: Fri, 19 Feb 2021 11:57:04 +0100 Subject: [PATCH] include obj name in shared intermediate @@ -12,7 +12,7 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/gyp/pylib/gyp/generator/ninja.py b/tools/gyp/pylib/gyp/generator/ninja.py -index d173bf2299..efaeee53ef 100644 +index 3db3771ac9..2e0a021703 100644 --- a/tools/gyp/pylib/gyp/generator/ninja.py +++ b/tools/gyp/pylib/gyp/generator/ninja.py @@ -42,7 +42,7 @@ generator_default_variables = { diff --git a/package/nodejs/nodejs.hash b/package/nodejs/nodejs.hash index 12ae449ab4..83e4c271ce 100644 --- a/package/nodejs/nodejs.hash +++ b/package/nodejs/nodejs.hash @@ -1,5 +1,5 @@ -# From https://nodejs.org/dist/v16.16.0/SHASUMS256.txt -sha256 145151eff3b2aa5ebe73384009c52271a83740ae687a93c98c628cd7d52736eb node-v16.16.0.tar.xz +# From https://nodejs.org/dist/v16.17.1/SHASUMS256.txt +sha256 6721feb4152d56d2c6b358ce397abd5a7f1daf09ee2e25c5021b9b4d3f86a330 node-v16.17.1.tar.xz # Hash for license file -sha256 6211cc77f9ceaf365db12faf050775b3a1e6da7a1eff3577ba006c4918103c33 LICENSE +sha256 69090e865afa7c62715b97f0712632d2923bd7a5faba91f94e4e75a2f9219d5e LICENSE diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index e9fe96812f..05456e3443 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -4,7 +4,7 @@ # ################################################################################ -NODEJS_VERSION = 16.16.0 +NODEJS_VERSION = 16.17.1 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ From peter at korsgaard.com Tue Oct 11 19:22:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 11 Oct 2022 21:22:42 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/redis: security bump to v7.0.5 Message-ID: <20221011192552.9BA7986BD9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e665d20f7afaf531d9de1334884879caaa84a76b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x >From the release notes: (https://github.com/redis/redis/blob/7.0.5/00-RELEASENOTES) ================================================================================ Redis 7.0.5 Released Wed Sep 21 20:00:00 IST 2022 ================================================================================ Upgrade urgency: SECURITY, contains fixes to security issues. Security Fixes: * (CVE-2022-35951) Executing a XAUTOCLAIM command on a stream key in a specific state, with a specially crafted COUNT argument, may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. The problem affects Redis versions 7.0.0 or newer [reported by Xion (SeungHyun Lee) of KAIST GoN]. Signed-off-by: Titouan Christophe Signed-off-by: Thomas Petazzoni (cherry picked from commit af56cfe372a064a3de2e3baf446cdc59f81cdfd7) Signed-off-by: Peter Korsgaard --- package/redis/redis.hash | 2 +- package/redis/redis.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/redis/redis.hash b/package/redis/redis.hash index d9b6ebea54..a10df46031 100644 --- a/package/redis/redis.hash +++ b/package/redis/redis.hash @@ -1,5 +1,5 @@ # From https://github.com/redis/redis-hashes/blob/master/README -sha256 f0e65fda74c44a3dd4fa9d512d4d4d833dd0939c934e946a5c622a630d057f2f redis-7.0.4.tar.gz +sha256 67054cc37b58c125df93bd78000261ec0ef4436a26b40f38262c780e56315cc3 redis-7.0.5.tar.gz # Locally calculated sha256 97f0a15b7bbae580d2609dad2e11f1956ae167be296ab60f4691ab9c30ee9828 COPYING diff --git a/package/redis/redis.mk b/package/redis/redis.mk index 245e9b4d1f..7a637c106c 100644 --- a/package/redis/redis.mk +++ b/package/redis/redis.mk @@ -4,7 +4,7 @@ # ################################################################################ -REDIS_VERSION = 7.0.4 +REDIS_VERSION = 7.0.5 REDIS_SITE = http://download.redis.io/releases REDIS_LICENSE = BSD-3-Clause (core); MIT and BSD family licenses (Bundled components) REDIS_LICENSE_FILES = COPYING From mail at dbrgn.ch Tue Oct 11 22:21:01 2022 From: mail at dbrgn.ch (Danilo Bargen) Date: Wed, 12 Oct 2022 00:21:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.0 Message-ID: <20221012002101.02c1f4bf@c3po> Signed-off-by: Danilo Bargen --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..b8c9278405 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 9b2e9c2d8cbdcf50b3b7865b27a535815874c8d6066f9b7e1ca4d88941065401 tealdeer-1.6.0.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..18b5c35351 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.0 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT -- 2.38.0 From me at linux.beauty Wed Oct 12 01:34:39 2022 From: me at linux.beauty (Li Chen) Date: Wed, 12 Oct 2022 09:34:39 +0800 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod Message-ID: <87edvdeseo.wl-me@linux.beauty> Content-Transfer-Encoding: 8bit kmod install path is always /usr/bin/kmod instead of /bin/kmod. So if we link modprobe/lsmod/... to /bin/kmod We will get error like: > # modprobe > -sh: modprobe: not found because it points to: > # ls -liah /sbin/modprobe > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod and kmod is under /usr/bin/kmod instead of /bin/kmod. Signed-off-by: Li Chen --- package/kmod/kmod.mk | 5 ----- 1 file changed, 5 deletions(-) diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..cfb4a27cf3 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -73,12 +73,7 @@ ifeq ($(BR2_PACKAGE_KMOD_TOOLS),y) KMOD_LICENSE += , GPL-2.0+ (tools) KMOD_LICENSE_FILES += COPYING -# /sbin is really /usr/sbin with merged /usr, so adjust relative symlink -ifeq ($(BR2_ROOTFS_MERGED_USR),y) -KMOD_BIN_PATH = ../bin/kmod -else KMOD_BIN_PATH = ../usr/bin/kmod -endif define KMOD_INSTALL_TOOLS for i in depmod insmod lsmod modinfo modprobe rmmod; do \ -- 2.37.2 From thomas.petazzoni at bootlin.com Wed Oct 12 05:36:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 05:36:42 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-11 Message-ID: <20221012053648.B5A9540519@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-11 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 10 | 3 | 0 | 13 | 2022.08.x | 12 | 13 | 0 | 25 | master | 100 | 752 | 9 | 861 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 375 host-gcc-initial-11.3.0 | 32 bearssl-0.6 | 30 host-binutils-2.38 | 23 ca-certificates-20211016 | 20 crun-1.5 | 14 coremark-pro-1.1.2743 | 13 host-f2fs-tools-1.15.0 | 13 host-sentry-cli-1.59.0 | 12 berkeleydb-5.3.28 | 11 brltty | 8 libglib2-2.72.3 | 7 dieharder-3.31.1 | 6 flite-2.2 | 6 host-gcc-initial-10.4.0 | 6 host-gcc-initial-12.2.0 | 6 slang-2.3.2 | 6 efivar-38 | 5 host-binutils-2.37 | 5 host-gcc-final-11.3.0 | 5 igd2-for-linux-2.1 | 5 libnss-3.83 | 5 sdl-1.2.15 | 5 sysvinit-2.99 | 5 autofs-5.1.8 | 4 btrfs-progs-5.16.2 | 4 gerbera-1.10.0 | 4 dash-0.5.11.5 | 3 fbset-2.1 | 3 gensio-2.5.5 | 3 host-binutils-2.39 | 3 host-pahole-73383b3a39afe86... | 3 host-riscv-isa-sim-1.1.0 | 3 host-rust-1.64.0 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 linux-6.0 | 3 musepack-r475 | 3 ocf-linux-20171122 | 3 dahdi-linux-5c840cf43838e06... | 2 dmraid-1.0.0.rc16-3 | 2 duma-2.5.15 | 2 elfutils-0.186 | 2 gitlab-runner-14.5.1 | 2 gmrender-resurrect-0.0.9 | 2 host-go-1.19.1 | 2 host-protobuf-c-1.4.1 | 2 libarchive-3.6.1 | 2 libcurl-7.84.0 | 2 libgpg-error-1.45 | 2 nanocom-1.0 | 2 perl-5.34.1 | 2 pistache-3ec9d7c4f8b828fdd3... | 2 refpolicy-2.20220106 | 2 toolchain-external-codescap... | 2 traceroute-2.1.0 | 2 uclibc-1.0.42 | 2 unknown | 2 xenomai-3.0.10 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 4th-3.64.1 | 1 ace-7.0.6 | 1 apcupsd-3.14.14 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dropbear-2022.82 | 1 erlang-22.3.4.22 | 1 exempi-2.6.1 | 1 fdk-aac-2.0.2 | 1 ffmpeg-4.4.2 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 frotz-2.54 | 1 frr-8.3.1 | 1 gpm-1.20.7 | 1 hdparm-9.63 | 1 host-delve-1.8.0 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-final-arc-2020.09-... | 1 host-gdb-arc-2020.09-releas... | 1 jhead-3.06.0.1 | 1 libmdbx-0.11.11 | 1 libopenssl-1.1.1q | 1 linux-5.10.145-cip17 | 1 liquid-dsp-1.4.0 | 1 memcached-1.6.16 | 1 micropython-1.19 | 1 mmc-utils-d40ec535b9d4e4c97... | 1 musl-1.2.3 | 1 php-8.1.9 | 1 pimd-2.3.2 | 1 poppler-21.12.0 | 1 procps-ng-3.3.17 | 1 quickjs-2021-03-27 | 1 rauc-1.8 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 systemd-250.4 | 1 tealdeer-1.5.0 | 1 uclibc-ng-test-0844445e7358... | 1 wampcc-1.6 | 1 wavemon-0.9.4 | 1 znc-1.8.2 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/790fd9637c8bbd353e6d859db64c854fe2a4fad9 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/84d2518c75cbb6a617eadfc40f9ffa042aec0989 | aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/143430b6f17256fce77453ba6e24c7d26517cb11 | mips64el | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/ca03fa3bb1cf32ff8154b382d5c4dd5f9bd71939 | mips | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9b7d88d647c151df2c8888ccef4c2681d9540534 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/562031e3a06287ed544072b3b40e1e98460ea53c | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad184e25dee469d5573b0fa208da3fa888100e27 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/151970c0dd2b244a1983dc08033581342c787e9e | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3203ad10ddc5a382590635e005401f54469f0c4 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/17ffbb1cc5b104c9a090e999cbb91b2648b60369 | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c539423c3f79298e0ccd32f6d0dda7ebad376638 | powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/de42234cdcfc5310bffdbc9c46d05f6a3e5586a3 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/99205c6394261837a42dc30c488a3b25c4d0a44a | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/921a75548209405ac869c600fb5afa67968cac47 | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f41594b362de9d1c51534c91ba8b9d60703c5d6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6bf0f2c716091e3503200a2d4ba7475b021a58f | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1831be6c2a55e4ec9ed0cfda464f9ccfbeb96e53 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/85fe224a559e9cca3abcbeb018988d342183f8ac | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/295ecd7d8630bf4ee77814873f0cd413bc4b77d8 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6d9dac7e28093a40596baef54de42eb770e1ea3 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ee2e174a7635d90395603289675432df00b5075 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0d9a69a014a3deb4e6caa879d2b0224f100b6414 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/703d2dba1767f94150bb36333adaaba2cefec1c6 | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ab5fe6b3fd7cfe71e961b330b027995d834a5ea1 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a08032c678483768ab0839c176134c29838052fb | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b354baad99fda87f88318abed8cfe93435f8c2b5 | i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/389a7e8dd448e01c5088793e59be1354864a3a8d | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ae510ca630a71b9f459783ea0901c8bbe9efddef | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6b8cfcb36bc32e39fa9f6ee539915e3fb430cd2e | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f1f1810cca2f7deb5b311bb19668adcc301c8e1 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/317820f04974e3a712808385c18a82c15af36431 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e79e9ad340a043f09f9e0c891250bbe04ca343dd | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/34a33d647e7e23d8640368fa20a87d5d318e5f9e | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a4ac22c7fe2377a338b4a5e0e607f4ee9dc7067 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8cea6e3c052768f2a58baf1a389d9b1cc3430943 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c786e3a89b930480e60b14377b2a01261604dccd | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a597c19fb8cdb2acaaa9cf0721741ada3e874e12 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/35d0f632942150edd040e17389199ba04d92beed | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56bb0b11b0c18c2f6cd93f5714db69098532dff5 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dfd85db7add2ae8f5568b8c5eb96c7d5ebefcb99 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/23fbed310b2e18db46677c919f37a4f980410ff9 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56be9856023e6526c33cfc8244c91cec8de7ce41 | mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/feb913606e115edb5031619d3c419e2d4a379961 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1006246752ac677682c2438c506854aa64db5a10 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/99928f58d16b54b42f3f6bd5280d0e43e6359cc5 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/19679a8648dff153b728df3936bd0dccad376c5c | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/921a0fa9b981e74c658f5e1f48fe5ac31e57a0e7 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/780c30d345a0540c4cf473bc9b17f3844530d23d | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/13df746762d022684d37bfddb4114dee3bdc1987 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f63738733d11095a358d63567299827c08662083 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b7c6b02b1afdf2b9f4c4182bee9d17cca8a6c775 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fb9310781efa54fefbc55b1a62e0aac606047869 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e4a5e4b469fa0086e57f0cc9add62c77e147e3eb | ORPH sh4aeb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/deb27089f2c94969383d3acddb6e4d8e5e66c16a | aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/1d886c3089d67e8907dcd61075c0904e93e55f01 | ORPH sparc | brltty | TIM | http://autobuild.buildroot.net/results/cc51db61d23c5553ab8489c241154ef4dbffdc3d | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/f37b7d3826505699989f833e08494e5e5ff8e834 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0346a2fa4ecf51196b2c3570362affa30f1f2b24 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/4dd2d28f946cdaa83d0d5acb4795f260424a578b | i686 | brltty | TIM | http://autobuild.buildroot.net/results/0d810013e82d88e7e052a913103462aa7b9a3388 | armeb | brltty | TIM | http://autobuild.buildroot.net/results/3a7fcc06550a3bdf902d0aeafcc7de93d50f358a | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/329e426588507e977a329ab9013d8cc1268dbeac | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/261ffa03a739ce689fff825b355a36b20a2f0145 | aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1ba1c19c2e5e8630c8633f326073eef8b6ede5e8 | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/97f96b4e026c6165cb41238a5d5f92fc70020ecf | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/24ce03d937582846b93500a86baa10e6e1aa8e25 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b7f2827712a35b78039bf556aeded9f6dabaa796 | ORPH microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bac3dccfbc9bf3048e7c551b30a0e1a4302e8152 | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97701df77fc1dbc7ab7dba521a76ca3e38dd8912 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/93767e568b51622ea3d4a95afb411384a578a5f2 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a2f5f4d7bd6cdff954672c79a1611edf15265a0f | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a72f7e0dccbd469fd51d377f645efe366e5a3df0 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9fc3111c5ef6d606c14c109d82a845cf51d5965 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e79f9b6d2a4a94ef933c77abf781a0a31ae46813 | x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/edefc59ddb4cd65509f6ae2cb9f6fee5ba6837ef | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/537da7f95f7b37031d7143d13b36fbd3a4f97acd | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4e717e47839dfb34487c7b186636e03efb1544de | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9b7935e00f3494cd16bbf6461a4f87eb0b27ce59 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae35248b608d6ca5ddec053090eba4d61813cc78 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bdd3bfe442562c59c7ef9792715fa6d1b4017f66 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b1b1a3f32ccb4bbad188034142b10bfb73bfe18 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a06264c8fd1cc718ea0e4fe9f876f27831d8c765 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fd8aff30a8e5d726b6d2d2ef532bf412df8f58e5 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d7206649f7beef443c5c063e76d1d9aa07420ad8 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c9fab74d89d42e448f4a047d5e485533bf32cb0d | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2ac539fec76900f7e1bd3bbc7ecd04348cbaf309 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1c68f8e1067f90ca9f44788f6d5c701d298010c3 | i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2aa328c22ea6ef21a8f8a6716bf92c47b49fa685 | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/3272f3c49d9d078c9e9ad4ae3c57476fde30d52b | ORPH powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a4ce2bf5da54beb72064b143a75050a439208d33 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a393838e5bde026441d3283c1463dade0983e56b | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6112a60828ac6c8765f9f93603ee30c928c2037 | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e7583a8e6feb62737b229ad5a09e2c1baee01baa | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a1b0462bc20f791245d0b47051a9a478b94455e3 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2b8e33beead0c006b3d2b2264fe125d6ae670940 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/62ccf8eb674edd2bdd5e39f37bc7c17cc94e3ab6 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d67adb8ae6b8696173544d9bea097013951c3cc6 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/69b525ffbbbfefc6d5f8b51bc1e5cff64e99e7f7 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d55fa9f049882c33c2bbb977b919c3ea70f33a91 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/01c3cffa50d7ab7cb6dfe4480a921785a021e7f7 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7e4c74c23cc44326e817aa49591158edb0ae09f3 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cb071dc01a3013177f61d42df091c989d1bdb60f | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/839a08988aad929fdc913372eda4cb87b4835ace | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de4548e9f67521282fd613fdc03ffd3b3ae6a8 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20e2e5527bcb40f3abda961c66a0061ef3c4e82 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d865eaea5fd7065770edc925e96c825538fb5ef8 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2f3adef20f6e97ce847b89341a4072d054287c75 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aa6a1b08eabdbb785ecda23b835c27d5ddd6a696 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb51bd98aada4fa235509f0cb01a53db24860fb | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29a152c67e14984621088524ba3bbdfa7ccfeb76 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/18fcc3777a162bc13e296b5dba76288b084ebfca | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb53c8cb6ad0143acc60ab67d4f42410f0ad27c4 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b51c6e7b1c07129ec291a90b6414b640a3243a77 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cf4eb323c8898426b209b638fd9a16799cf9579 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/484127fdc4bc9a83456e72a88fdabb89454b919c | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3a8f09086d881d6462b8ca2746a502d6bc1846e2 | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5c2d0b6493ffbf52e9627e5d65f7b80681d5869a | riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8a957e8aeef0400a49f057d0587d3d5fdb771849 | powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a2bcaf4556ed797dd8c5b622bb0c33c17da4afe9 | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e4c6830e947fc9a01bf03fcc85490e15864bb0a1 | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/045a4049ae7bb2e7000feda1a3afb17b69f0d2e8 | ORPH arceb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ea7b9e130c7c82933365e66ba7a511731b71beff | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7be8b87cae2f75f5fe836a04df54b72a95be780a | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d8a62b292b68076f4ee1032d6ff58ff5b6fe1013 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/2df0e815574d5b1e228a4854d502599a5523c757 | arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e832f4c0e39fb879d243a908630af9ec6d6eae4a | xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3170cf77eed465ed6078be52b08e2c90bc326732 | arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99522bdfcc195585aafb40d738b95d1e5c9e5980 | ORPH mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0ef821cc9f725d0812bb08f5c28a5c486688cd02 | ORPH riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/50a6580fa85f87ddc6b4ba69dde0c7ced2ce6d71 | aarch64_be | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e9527fda55c5aede1a998f87077314f5436793b9 | ORPH arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4504eb874b6327efc587b0ccab9ea9a0b3baa34 | ORPH mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/afb2d3014e60410a5c08cf02ff1a959bc8ff4ef3 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9ff45e12e4be0f4254aa7034ddfbc2ca0cc91956 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a9e8b584fb65ac475db9ccd362323ac74b49e1f4 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/b45c7b3c6d15a37846165f14a14ae95e8ba1bc25 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/72004e0791681dc8beacf60cde1056a1a83af177 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6f440ca4d36579026ea8d1fd45d8f80dd17f093e | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2582d40ccefd446fc347bd1388ce92c99a0f82ac | ORPH mipsel | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/b227bf90f6b7c9fe3c779045f8cefcaf3c152fb2 | mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/53d17d65c80dfcc1799592de7aca618cca2c3e20 | arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3f5d5e7fbc07e534918d0109953ed7a9c458243a | ORPH mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/993a2397c4ec92d2c751efa9d115dd9b2c43fe19 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/709e7c4025d027766bf65d1195baf49072a87750 | ORPH x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/11a56833280bb781a175746977a1fc5ab59d5499 | aarch64 | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/789215d1a24ee66cd8ec1e74eafe155838b668e1 | nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a5069e0c7dbf4d74d8c2395ce874bbb5e106eb25 | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/ed0a326f68c429ea95da0b8b0376454b7e39947d | or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a17130de81e242eb9fd34a95b5e27b834021da6f | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4e3962cbcd7ccb22f8b6093ce6ed7fc7e0c2f139 | or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/c06b42efcd0da915da740fef3fce0fea1f05aef2 | microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/eeeae56a9723bef13b397167ca433cdd2cf933bf | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/16f0f845d3f84823c0e7e9fa9743f0f3d8a97adc | ORPH powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a24f98091db6bb0e890feb72638b96d3c32cda07 | arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d0332c6b8d3253214e0c912a36dc68d56d0b5eb0 | arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/d30d43a9cb694555e79f8bc646ea8dc9ea2851dd | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8ed57e6ba7354cb8dc2ef9bacc81f82ffd0dc59c | mips64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/afb47a30e019eb171851ece2c2c1b4cdfd96cf33 | aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d0f1bf9784436978f0fc3abe30ba43f6cccafc30 | powerpc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/96e40521e06da675e1b3bcd8452d169b6f5309bd | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/926a4ee20ea69e45156c78a7f78bac962ef9d55b | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cd7b1f3b5fb868a85dbcf8af0ffdd75674bb5f2a | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/252716069f100a0e8161beb909ea303d47526b73 | x86_64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/aec701e2328411817b19b6c85c2e04f5bf0e9cc4 | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/a5f06c86470af298491e359a1c667a8677dd2e54 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b8449ce4a0701d6b6853f0a684985d4c6abfa97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d3ab471b470540dfb0055f3942002bcf697624f | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bab8058e8a6ad545e0a85f19a6521287b3b6eda8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e79a959c4c81dd0cc660d3c82f36fd84003e1c1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be0f3a99ca1135d1d64971b71051e7c686866497 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6100b93bd310d24df7b9f5f1091a767ae666f427 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d14af6bf6cc3cf219fcdce86e19d92cb4a757e50 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6bc19f452dc73039467420ac47c01b776fdd36e1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ec083468463bc4fc50a21066018cbc73fd54503 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f41e97f808785401b708e795b8423b21d19991f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7994d0025251175e4243701171a6b7210b8dbc16 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/197760dbbe212de2206e842c152a3eae100611ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/579408bf8be26c705ee623603f4cdfd650286957 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5426e18f67c88eb70fb3d1188c876a9c28da995 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/227b55f86346bb802e07be5f3be1f3a4060481b6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7e191fd726ab704cb572a9aa235aa93eb87403f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/824fd54cb9fd6809164860da9838a86389283e5b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc0cd8fd99099e557ef941d0b62b890d99cb073b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a755d5edbb57adb4bfe390bb2d18b10fe910ea | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/869daf57e80d3d3cde4b8696e7b6e63f635dc06b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce5a7463d1b835868a3dbad0e41069afc3f9ba79 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0043357ab7ac15e35f70613f7cd0229e472023b7 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09e49a679e03b5ab3bf1ed01fe4780854ef84bc8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fbcdb0dcf52094181b1d69be7735b04e3d30d3c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f1f1f080ac92b67dac4265121a702bf01d606f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d10d8baf5ba6599fa65f1811d832519336e91bcc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97eca688cd177f750c3cadca2ad1a0dacd41d80a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f46d1496ae8da5f85c4fcaf1b4e41a0fa58387cb | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea2409526df5c15a6c13158bd0f5babcaec9f0be | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca0eb3c2dd1b12fab4f584b082013cb907f056 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e03d82c56e8c43448290aa15df69dce3453aec41 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a0eb08a321860784e995c5fb2909cc3def409d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18f58b9f6a351519c81d2c3c774f6bba7ab7c981 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6877a9cb7e989ac24c771e21e13afb26bb1410f1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5bffb780721763b384e84538c436d3f68e61c2c | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e67f1a5c5afe559d43686b9005158d5d5bbb30c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6544f70979d3e542eff1e34c33e41c5c80c3231c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fbd5d5877126e102098247265e05901b8ec8fdf4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/132a75774fe8cf15a94861da3ecdd2d3909d13dc | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37e17c3af02d4f6bec452cdb9a783d54178fd983 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a8a904b51b5537f3ee6d94905bbc81a6638e6f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ac8095e3a920e561ae71513fabda6766546065b | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7ee3b7a9aab40f8c26042879524b52facc49437 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b2cf8bb94cedc078c482e7fb711bae8a9e3c60a | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9fc0da2baa6227b56e1577df80222bcbaecdf95 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72efc20d3df70bb90aa2a7d1502309162211f692 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a984cca0c7633d6240e5385236298a06d56ce636 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1132401325aea012031c704cfb125140881817c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e061bb7a5a013c12491375ec0f47c8824d5ba8ce | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92cc31862fdb127a2e037bd57f0b8980d4dfbcc9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9c676aaa7b32c3373e52fea0f81d5b5c42e6eb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b7ca2e836f7f735af00da34ec556948e9754ee4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753d83439e284aee147f43ce65ef36a9789c5fce | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/169c25f3d5c72ab53e50ba874ceb10807eb63771 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb5dd02f46fb07aff26abc50bd3f59dedf5fefc | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bdb0dd286fab729e28658222330f8a06df2ddbe | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f099f608ef9e9fd42fe528baacafac72218b50b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d0d3ab0b8ea3b79f5bdddc9fd1aeca5482f2662 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e517fff50e0402309f8b143991f972bc41b9a26a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/844c28be7f81cec0288242efdf66b7feb3b10934 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4357f40408a1efe90f126a7f4784af1c153629ca | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2592df306b91d3e1115efd026cd32173bcc20413 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92adf732c43cb97b96ba7a4bf383a3fcc4d83a2f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9657daa044fd9404e4067e1419d6f5b68153d1f5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15402c37f18d5283676b77b085489ddde6d6017b | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18062b80dfd9d3822e3ba2c440d2fc87b22d9ba4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32071db54d552586b87b340af2083ad884429553 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b792116457696a4ba6ffd2b461cc3b81af991e6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13c87c2db1cfcd46fdbb364eb3ed1bb053d783a8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca918494d0ce5445f41f7f51f9bea31a5e81b2da | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b4346a4f91849f6599ee531fe789dedf88bdce0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93da532f18bfe66025ea12e7aa225a347c43d790 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae14c6e7ae9bbb495ac4f58abfd1e76236d85b3 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0d865c91be2760b3de130790c9a03003e3444d6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/290aa1bb2d3ff882ed7b673d559a2fbe3f99dec4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3a5db26357700cae260639c6a6d018d8a513f0 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5175dc0c2476bc3505b9d2c36150c319b49d9c84 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/811a77851fc77577c8b64a3aa383833ff23006dc | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8556b25bb120790eaf470826b74f155d80468bf7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e8b67631dad47bceb27980653d9aa6cd33756e5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa641b1f45cd45893b0237ee8d7acac530155a4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a5b6e22f567f2652fe12c667c1458d907dca008 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd197803491828ecd255f178ab359dc758b6d551 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90f7fbc896d78e5db954be1a0662eec9f94efaff | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2eb56b509940eb2db2084a597cc4b3a7b889ddc | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62ff8be7c0942dce808bc3d8911b589930d62003 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/932b53100fb00ca419512b1a527d52c1a97d4060 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6556d0e82f8a07867624c7492e94608c6338927 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59e2cc31fa7583f5a88637a1b55894387a14aff2 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1e63364e83486dfa37fc53fec2ae1365b6df821 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93012f360497d909f401972dcbcd7373ef956650 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9dfaa1ef64cd1b35f469c76b91c701a2f640d42d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ea7803178d80cf14d6d54944e2e01727434f5cb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4aba9ea2ab12569869179cd24ada8bba3c509b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e2498666801200e7b614250e8077afc3aca86b3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ea1e8ae07860af9af27797d0dad07a3718101af | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320d81f4e574af1fc3d2ca03e1fd013f946cd8fb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed4163fff6eecf41f2adb67ebbb0ff46c4ee067 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/abbc4e64ba2a3dd11a9712bc42d17067bfd09bec | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34084d48682ba7b3ffe3795eb7d9c9d6021d2106 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80346009ac641bfbb1b3b84a9dbd673e77f43aa7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a5982e523d3ab1b594692d1b90ab45b5499e1b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/638c11b8feb97b4a848591f01d441e1bc77320fb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fed2af45405686f7a1d916c4a468e8dd934c0559 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fadf874a3b909dbda16e5a5ef9e740b6c841e06e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69dbc2472d1265ba8757310766f5cc505ed10a7a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5e8b7a6bb748491716a8239fdfe20d28732ca0c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769b94b93bd26d200ab5a2dd0294c1592dabbb00 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e2119de0ef22de0c8294b7e3a2d9e58f8d76db1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647d5376a2b18bb0cd7b0f22d4f9b496c13cd2be | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2695ca219a4cec71b520959ee970cfd187fe2cd5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9679b9f2c651365426d6a3caec76ba537b42dbc1 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25f62bc40d7ada1032992878696519e515bfe9f2 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9696e19fcb9d238dadea69c807d66bc8b18ebf3 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fc22e5fb104308ab032b921b41a6bbbe7429cb4 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1e3f063015514b2e47745be6977a07e67475bc1 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0851e64d360ba5d17d328dcbf228e92d5e1dc306 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/243f0a394df612342146b23c70dcab33f31c1d24 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2209845634d2f0c5a1531cf4a259edfe04409633 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa211a6540003c246f5e21da5f1506021e0ba8c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0ae2ecbd536714a38d60407085d28c2b4f16fb6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8997c4b28c37f81d6c88f1ef7d71af6e1621e94f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b35b50e5d333e926122b42affc57ada1f444ce53 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e5c04cd297638fce8d0c8c23f28f6e204f096e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cfa28ba84a15f414799c14e0a885cb1eeb03bb2e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9617020b9699f196d5bba18b195fef6978a30220 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97d2f1349e8e9575c1c71c9b6932960fb88d88a6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b9252a98271edc5aeb33d8f0fb6f780f40bfff1 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72280c51159770f90830d9c0ed5816dd6a35c386 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a327039176014894f7eb5dfd3788750b3fe7c502 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc418cdd590dd65dbeb201acd9f71cc0fcd24c5f | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdeea5facf85e2c5923760599aa64233ef9eaf70 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61629cabf7625216807d74b7bf514dc6a0d47baa | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d544107673411caf20dd11e43126d2ac07a322b0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d2166a12faee9992cb28207b03660d614a49bf6 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216b43be158a798ec5b42c7c0a0ebfd29a0c384a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e7bd38d61b830b8e213e399e28175dd00c5d3a6 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f6a5f97f1001706eb7062f2fd57a3e57a6ba57 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d11cbb2353d750e1b864d02b74df278382edb64 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e73d84ade8030478428277c4b97aecfc2522fa8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca018cdc7e4523788ac0aa01233c09543ebde770 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b215925e91813db68fa600bf1d6896e55b02dbf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd82425aa0f9b0e25cf4425e08401a905311e8fa | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5406b5d32a64ee82a4db1e884553e08727dd98a0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4930f9145d6f393ac9bead727aaa9bf2a8d167d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ccf0903e529fd2820f00376ae136c60cf4ca523 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f8f7cd96ce9cf39e344deb178dee02d062f0ca4 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3db806c0cf126018292d3d83d81410cee6379f59 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45bbe47d649018f8f156ae46d2092c4c090072a4 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/253c6b5bb66f54d5707f9a39ec3ca589d27aaab1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3760520241b05c858c6a31c7bfc08d6f700eec4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28897f3ada83ec56b8780a5b3fcb158968421075 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62e35a296840d2ddba7fdcabb16672b0d823e458 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/990f379b53c1166e158db161b7b13104378104b1 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0357b9f08e50108cb61b9189df77e649ba0c846d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dcdb2193cb5aa9cb7ba8edce0e3b1fd2de32eec | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/875e7b7b234f232d02188582db5566722b7be80a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c690cfb07c2ef73880b558524d4a9280869eab26 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ad59c3202f95607e0621ed8d88d4ce212a207c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10e1aa871ced8acc2075b2df25d4f5f6a2d10156 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75fd8a9234691dd1d44bbfa0042313f1b68b8936 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/89ac8837710a4df60c222509fb423f4458efba54 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e6bfd5ec65df0286efe0c89dc703431b558bfae | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbd98e2fe401c1337fd9c0754b7dabdd220d36c1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0c775a5a6ffbfe083974d2d3a31b8bafe2868af | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86545991d4f7d82948e21c5873b10704c3012a20 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b99875abadc907ba1d41991a423549627304a2fe | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec93abd1ef29c281ccc75e177be6740134359708 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33ac614be44a5f65bd7b9f879104991dd3e5544f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4849fa1599c1ab0fa3886c0a4af57708ff4fa081 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8508fd20d6119c62a6bb8cdf24a927e63d31629 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c305439077dd6aa173b5ceb7b6286112284b825e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbfc701cd352f1e8c98d92575d38f4307259f44a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd335c2c6e7bf83de0ad36896189be0738b45a13 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10be76c03ceafd9413395ef5f82ab1828788df5a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7c14e01ac5dba53ca4599549547a07b63806fe3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eee1f579ee3f28c54c10c20d5f7b5818a391fba9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344c0c2fd584c7c1a2a0a14eaf443d2e7d2289af | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f553f2232214162253c5895e56dae90f30767c4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc54dbe6567c1a723babffa7a19f4a62edb8a28 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4333ec208784c95d2006ddf58d67395d0f357b03 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9b5b424506bc24b47add6c8b6a9f4297c9f5f7 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/180a9eac416b5f7042c62e6c69aaebb356895a07 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b8b8f7de679bc5f38472a43bdd6ea2e2360e63a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d2395eee36661fc62d46d98404469feaaca0b2b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f33acbbdf0661e4e559a2e4f8d89ed7f4234d473 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e92cb0a382e6152ea0fb259031c9855061da07f4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58bb073af3dd7d00dd379139b4f76d9904c3ca8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d47d8caaea168256e17c104acbbaa33da0932331 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48ee582a4fb7b6a4cd5fa66460c689d2aa25c23b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a36467004d2b4795851ccb306f28a3f532c3039f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b9c8c6f2c250a892468c03be626336b635e52bf | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c64cf6c663371a28b6b11596ed6603ad870fa387 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63e7b35aef8f9d982a5c64d384582655cc9773fb | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d457f6bef1d38038a30a034416f40a68a18c695e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016bc1e129b882999032e88b738dd93a3b29af8c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09d96d593a6d19b751c89dc150e98f41bda0dbf7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc78641f5f48c6b4924102ff65863a98f8f0a75a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6c247bc4b76e28067e215f2aa79be3fa805db6 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a454eda7bcec41f6f3622b9a0abc30c7130daff | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec9680834ee7249d7d67f195d7fb6907b8576a31 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6fc663bb77eec235d82269591bf8f22ba681011 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8433a6dd64879a71d995099674da505fe5db5a5f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/026144a41cc5311b462465d3fe7f89a797206ef5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2697b36c09706721c3e8d2fa3da87177c50b64a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd4d671d859f1f342c9baaabd998a384471b29aa | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7639c854910f1c93b65d1eaeb73860daae29d1 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5f0dc13b581916b7c8170324e61a38994ac4bc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb53571923f4c519b0a55166d626468a03d1f368 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770d7b4de2eceefd95da021ae216fe09aee75c92 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/808a818ad85830e76846db03c5bedd7e726921b9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d7a2d30030198d9d78482fd6542d0bd6146b22e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffb78b9a703d40f6d10ffeee5a8dfae55607200a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/884df5432d1b1d06eb3f9be1b0450a169d94c6af | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/459d0fbe4dabcbf94e321e3c28c3969d4f4d7769 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b3d7c46fdf2b2809be1a2bb622ac374d84b5938 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43193f19fe9d155f60edf3aac8ae269cf7d3fbb | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75c6c863c607ac4590f760ec7f98e15bc11184cb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bed79811171c010dc2994550cb0405f6f92e2ead | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2b1f509a2c2dd6ced12f81a46e1c2bead590e24 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/032166dc4714176a69fe15b63155fa42b1dbff34 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58e92c248e7bb244b4328b7b82452066ca12f62c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e5b04a4214f7ac3603b293cf0c0a04abf426b5d | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1f81af6151a2049217a088be007c28457df4733 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9847d269914997664cba94a4c636cac44fb3a7e6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ceede7520e8df238c9c34a8243afcce4120971cf | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee725f47ba28f49fbab234c7d6227d00159b32a1 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b903e5647accb5432c0a494107698c10c9e62f28 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f75b58b0a2e40e8c47c6e21355173b4930291d57 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d4eea76d6ffd50e3f7f38e91b85e7c1fc449304 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41d076a6fad75a9d698ba334af1e8feb3899a9c6 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca61886ee747878071aed7fe6a55200bae382e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c09d6aa6b5c594f264d35f0565441555916061 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14e66b7039afa6229f4af7da10fcbb4f9e4a954f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ced681a6e4ddd0a7720926241aa8906cabeb0616 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e518a42495d23caf8af81461dd51915a8a26d1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e609064e0cef578ea9571ec64861e1c2fc28d8e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0445b79cf03d39a85251cbd152656f1a9baafc8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43970fc116801205e40f1fccace2651689baf222 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/882984b7dac01d31179bd5af3365a16ea3486101 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31c55f997dab1c58caf32729b2c97ff19bdf2f5b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5117b26637e191f7ba23dd8d9c01e6732ec937c | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049c92068485afc0c7d248a798931f52e6e401a8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769f694603c1cf80dcb6b1302624982a8c1adf0e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/888d2bab0c2e352f04ee76e7f12f4632ca07cb1f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdff0db6c799e5b079e6414d86dd95b767442176 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da2830c648efb5fd6e3871c5be4a1a72d90008e5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8716d1e50c828494ec37e6a2ad0a038fda2cbb48 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb5ca785b41c04f0d210d51f36b587db867bdc71 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ef65ff32b03c12a80c3abe4559afe354ca0b070 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9b789130b3bccf2d95b7131ebdba0c30a6ed6a9 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4a198d9ec80370fbe1f64d079942166fee04708 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f7f177b633a021cf7d3054f3f6f5bead0a0ce43 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/157af5e6b5ae30f1f5d1e1302d3e3932968e1321 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3feb51541fb82204300fbe4971ed08757d54866e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d0483b954f75c4212149101fef44ca0a4148351 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95aab551f66289e146c034f878145bc4b83fdfc6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d73c08783b507e3934363782b8d17bcbd17246d | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/675857450f360a598570b1485c944ae1e5acb5dc | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e30934fa0bc715641967c0d799eb2a5b09e67ec | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dafde5108a995e51f9d4fb735599a5f46803db27 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/558e564f0716183d79140f0fc35075f4b422923b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f7194bc7d23fc87d49e7108ee130471a3a737d7 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61c3a8cd16b83af35d0e06fbb339c116614ad888 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4d336a1b1847ee9188c2f8d1871f7e130baa4e6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a45ec466ee0217b92b6d2d32ad64584683b0630 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f121fdc4ad9f4c1e192eec23cd385a7dee0cce | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa3704162680d5f2fdc1130027f0935d0c6a983d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07e52aad6282c35a38add0a1cb9009b4d634abe | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/714f7a6eb03169893f4bf6adda8ef80f6b493868 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f901a2098a63a0e3a7e580c963f219637d2db680 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a92243bf390f9beb2e23a8408971313e039a0cf | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c77abf4034eb74e99e0e7ba8fe86e3fc797aadd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4e19e5f83e4cd990ca49dc0e5b5675f34414c5 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31f6c9ed0070a156050af4e7bae6997378ca5132 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07751664b5050850e248a1519c91b4d443dcca2a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827680dbadaac87c79d4144b7e3ed886cf46da44 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a44d30ac31f8ec2862d1da45d0b3efd6f79042 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39525562eecc21bb1da2ec0aa596cd52207d66a5 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c33315d339a7e97e86d7384df6c4478d4b4426c | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed521f1aad450c0b85cdabf51f4ec3e52738981f | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad30eed7f49d40cea72987db017a09258fe1f0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa305b931f8800253625a24461a9459764bff625 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b313d509ae32a8920f7dbbd69110d1811d9d2bc | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecae3edcc38b4d2465d71234eb067d27eb90b7b6 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/070f992e4adaa7f6e65c6cd3498137616f9ce398 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/044a809a02b8168ba379e0b658894003d7f524ac | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/890d413e7b788725e72a8bfbdb020f76410d05d1 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4b4fe4945c7dbb3d174897d73c9036d40011d6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e11e849f245a968825dc755989ecea621f4c0df | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c8ea6f531626f9fef4a56fb88626900edd69070 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea928938fc6c43aa16a86b41dd7c7026a8313f45 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c88c32c98a2d839eccbe05fc509e31f0e7295e19 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e90e9e7612fc5964737a39dcfa3133ba3ad2a70 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad1b4736eb8f6d23b094534100a65b3f16242953 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478b24fd23d07f835fd70f199dadd7cbd15aac00 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/000979ccc0f49698558facf6d771bdef3f07a32f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86e2e58b20f60476e5f37a35d3e5be1b426b643 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9550f5080c0bae5d4dc2f2aa41aa716748bf5e41 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85a45a1026d97c9ab54ca4fefc6effb3ebbbbb07 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b0b6257786142166a8837fdac3660c63b506395 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de125da38e98d14e68ae60e05addcac2e073971c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e41bbb45e47515e730439088e773202dc17d322 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a3a0d1ab972bb4adbba53d043267888012d829a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5580aa0fab057a92144b7ca6b22efe4d808e2536 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25c231d153641761b25aeb85200c0d184dbb64cb | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2083b4dcc07b1584b65f825130b1b4c722069f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8977b2abd8aa97143f5da28a3565f16af0043c6f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6433ed6c9a856dec041b11b90db0c237b2b0cd | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/150aabc1234a501ef9840f4c18f5ebc61885ba77 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d0f143af5b865adaf60260ed21f799ad3139dee | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4e815076f74fd69b1db896bd670e269ad64d7ec | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2658fd9e7e6d359cbd5fa9f3c40496ff4bc7be7 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be8c682951058e53a2826e338818832978d645a9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0905bfac7d59a07c9196a990114d20f657d547bb | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cef718e3b6eb91a22c78c0acb9646ffc7812c36 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fb207fb56d53c0719ee2016482eee1aa17d4beb | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01acde1187f04be43d0f328f1d4c4bc670d3afac | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/306c87695db5dc7c3d99851992ec6c56f4094938 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db654ed3d59e36ca82b21372ac6da1aa8afc4b1b | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/791b9a3367973bc8cf1cc059704710cbd2bf7495 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a69d9c406159f4b4ad083233963ceb24c30a28c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb42d2c661dd11ae04b8484f50f20deda00da41a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e374d405a76fca8534c62c9214116ac6279feb6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82b87c55f1b8c8df513b88de60915f319f5fd837 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45dabf7f9510d2cea58c4bb45a9c0625c054f003 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1806f7367e1fb1a0bd6b808802aabcca60b14229 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6f36f0e9c2925d31c75b61ea4bb16a7bc6cc5e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d388416f8a02c02ee3328801feb154b9a234b123 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d30bcaf6aa45faed866aa6cb3c4d25082d303d2 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5d4af272395720bf08eef90b314676c378cc1ae | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8561ad167e708ebb61648c6dbd311682f1f457a4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe1df7b41183eb76c1a38625582063c96c8b6428 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb7f3f978e2bd08bcc64b7369ef9d5d6f88be16a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ca3d0897a99842dc46b58421b5de2653da902b | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cecdaa9328caa22fa8dec1c8921503ca2b759c9 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6497e333090c48555d60f0a14c59fd9ba3190dce | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9227e1c5f45ff53568c02aa17a924bc88e50cd7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce814cac8e6a203c6e05982f854bc97162a5dd14 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8690bc4baccce8ed6ff5ebe842dc469aac331ba | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/777dad3e3fbbfae93157211293554ee197ef2839 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a5a1c4be8dc4368c4e57d437587be361fe55f8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d42345fcfd6199cfe2ed76e14497fa7756bbb44f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff47e341aca679752ced8e9d643f57c9b92c21d3 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a72ad4af3ade0a5e72d711ddbf985ccbf5c4d02 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ecb835113576e2794e325b6797c13fcac4e234d | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c44408801a75967c190372a8847a92198fd2de1 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71b63b7a8a1da178c39875fa93c7f06ac0ab0bb | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/598f356442d08d7c00a4acd24e68db0b673883e4 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eeca97ab6c488e945317a13dc9589ae61f9f5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0c4bda25d3fd6bec0d4c5f88d03a461885f7f89 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/490e14ecdcf2d78ab6451d9183a13de2879e31fe | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27cd6ff074cc441db880d2bdc1332a564bd71fc8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53c48337f4e38e8beea0eff924fb45b3e75cd19 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e8c9b49b3f76d9949aaac9fda6eec915f61801 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79dec87fc8d6129679b2c96eb4fa503c7aeeb42f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf7f0dd0f6edc6f976a439637c863582f87bfe7b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f28baba18fa9c4307c9e864a22a913bbc11ac840 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f12084e6d631d3786a99e7e098f608502c2307 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ca20ca94a7aea072b283e85cb313d9de86f1ea2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b81f44065baf9f52d3502767bf1cca97f3907861 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9505b3633819fc03924ea82a6fadbd23d8b5095 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6f898e4cee21a4033557e562a553286c8bae791 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4ecf06d27ebb1f17076204649d176aff2a7f5e6 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b609e4f8922abe5adef2898b48ceb72629d0c021 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22ccfb7dccae7e74c9ae79e54ba35ef1666352f6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8552d71670019ba7490da0ccfe793f476e6e137 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23716cf9f9c0d7b569237f6d245fbfd0ec033a21 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38ce1bf94b51f6fda0423d175fe591166e606b8c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0e0fd407e7045e396cd2cdf13d05c27dc39658f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eee1b3d8454bf051090afb94df0923938afe287 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fe42fc166006b2f4d12430b27f6bfdd223ed305 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95ff358906ade7aff787d9db6f4e701e09763457 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d41946f2997e7e81032dc9c8f74fd7ce4e9b4b0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd59fe8f9a9a7f6a19abe0863dd380a3bcee70d5 | aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/748303e81411ce4dcc7ef9b42ed8c76f346494fe | arc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/d6a0bc684f72414b62cb0cf40c2cb8598b47ebb2 | sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7dc350d1c2f1857d27be59183b8bf37177f88dd6 | microblazeel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/0ee89d616333ceeda4f82c262c57ddcf6b0bc8c0 | powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/388a2cc92398a09a6b720dba89fe9c394cef8023 | microblazeel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c7d6dffe47e0cd162492db9b7564b303f8949f50 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/dd62aa0dda0be9bfd846de98df99d8fefdb75e7f | mipsel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8d8410044fef08b253c92716c7f0bf0058fd380c | arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcc5369e90f371550ecf823acddc3dce1604616d | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a72c5e5b2de0278f697de2e665a6c7a0a4523f9 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bd70f21e42ff392d3b7e0f7a4b803c9b8cf2ec33 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3733d0ed2a2f424fdb28550c11dc010022d845a1 | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f188862d6c9c118bd0561902a217179c2d559744 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6d9b67a6f3b0317db346ba6cd2879c8f4fd72853 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1ad6890cebeea960e7477f7ea22974a4704270b5 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2d6cf40e8bfaeb8d394ade22fb5a48689419a208 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/56c021dd6259d89b8dd0e3fcb51e8a091dbc8447 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1fb290058831b2db96375c738b935f83f5d65b0b | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e23c72590aefc67aefa317f840e2f9d4ede025bd | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/486188cba4946c091f8af46f2acf0ad57c852fe2 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f34336f467aaa7a0e660e5f513b8fa563eb7437e | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f6321d542aa92d4485d715ba2fb5c4b5c2874d89 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d5ce458e8757364d779539ea7389ab47b967b913 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7458482d1f6c8e6bb870d9e0ebaa16fc18fdaf60 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a0c42592fca2dc183ec4285cc55eb5726a08057 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cdd651addad4b7ca4a27be3d3a2fb1aadc845008 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/172d8471e1da235d5ca30994319fb39fb356ffe3 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/21cff6b9fb25ddbeed4629758697ef4be9ad97bf | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea370641200774482e29558fe5f63e3dc979091e | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b017d50007c7503eb7e1faed639a226ec27f1aa5 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b989f6ae80ddcf75940d468af1dfbe40cc55e310 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4316df7c08f041bcb736f017af05441f5a4f5106 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fac2d1e88c1f8a5078281233c80f03caa294e9e5 | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/5c2b113b82394b670e018d32a4c115fe82aea319 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b946c368514012026ed82ce10e1d2c86a576a1dd | arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f6067a50340b7ced67cdb67de9125c8a4e20bfd2 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc425437fd4c832ab30a37b2b42a297ca01ac219 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9eb9521c037cc5034c1eb1a3c6b0a45f7257b83 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a34c1636d93198a38209a87d026f992abc60d05b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b7ee5e650269fe32c9b6eee2bcc43bf70f03fdd | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/50a2f9c10e3e25f84c2c46fec9436553369c39a1 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b2d5978befa17d782267407ee699387204dbdaf | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d7e834f031eb30389a8984ada51f91b84635b043 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/676a4a02be934202b3928bf1671c5d131ed1da04 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b0f4c776b4d9eae0913d404c0eeec874fdb1701 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/632cbdde3987e23d5665fdc1c8dfb06a5eb74474 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1731e7da6dab2932efb0daba345f3e7e140980bc | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b826d612a32280256c5998275f31287de2fdf87a | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b833b5200dff6377ccde9fecb87cffb9f371a9c0 | x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/fb73187885a1cbda134ad4e6e7dab434d2b797a0 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08172ba68beee0c92e93149910f6c90bd552fe37 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d90f695b2ecef59f6829e5ad0cf0978f8c86b33 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1bba6be441eb028bbc2b997b5caf52b13b1e582 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a63ce609ecc0d0812cbf2e3126fb3aeb3c30506 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1e3c89f8c5b23c9600f3695c4287783f0d0949f | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/fd7503469bb31b03dfe24f9c117d03969d8e7475 | arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/096e12e3247538ce451cc933494de27a66bc3989 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9f64f9495878521f957769de4626bbd60f955e1e | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e1100dcbecf3b1cb1e55a5433deb7387dca1264 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/093a7d7a619f53c0bc7c9dac0bd3fecccd513559 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d48c50d5ea0ab438840724982e58f50ce4abb83c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/81903f96e5f480b742587bd7426f028d37f13819 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/e08feceabc2795819d666596de0bce1e11aa64b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5c51d014cdc6178371cdffab2d962bdfea85064 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6e2b88661bf06ccc907113bba2adc32c19e71b4c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a2562f5fa404e6a2970c57458eace161f775010b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aabd863c02f16e5b7255856c4649cd2033fb77c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f1e3d34926d4ecbfd5a972d193e50cefbff44d7 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d377427b65236cd08a7e86efead21dc0510cfabf | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ca13f99e08e4c2903e29371e550356b443e84f8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaa2b845b252ad746d28c22c326b70723568df31 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9c27f2146e4adee4fd1d8a18402e8dce47742e1e | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/76f66889efc8f88728d060d949293b18fde16e3d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a6b475a351da1de294958d9da5f65f13430b541c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef94c214e5e78f43ad1b68d7743ce3fd9d8c1c85 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c186cadf6d7590c38ad581e317523368b8687e25 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed928c3ece5c03d912871ec83ec2d7619b2b995 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/25b9da3e15e3cf076376f297d266dcb0fbb60c95 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/35b73bfbea83de50f87abeb9dc650252b8568e33 | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dc9c8df47ec2d772d48319fd105281578e3d5356 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/13801a386bffad30948a822dfb7699f29ccb3e75 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ad18af624123050ec81be35e18378d6e9419a9ba | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8c4ee5d40cd2cf5b842d630a278402dbc1ed8ffb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc0f9741aebc71446c969a94bb59d31bd8d2917d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9bb4ea4fbc658153329aebfd9e3eb458f84b1f13 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d680b706839365738d04b6bd2347f68b6a2d5561 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/42a27598d9269c97a332988d86a90eddb70c3904 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1eb8a2c09992f7c2fc2462fae78cb4603fa7b0c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9ea243d4ff5f8bc329fde80c10ef3aedf2f4746e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2c11b6afe3ab2613d384480652d64f11e513ff44 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95cd84fae3d2c0e8b843cee38d0c816e7b9c620f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0459a388204c3740499bdca526136c4ee2a0272b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce8ab4721766b1b304449e77fac273019daf1368 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b2aac6306692bdc81736ff181c3b82b51d22741b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b379a3db0367552b8e3a48edb66cc18ebd3a87b5 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/163fccbd172ea444d949603f932e343a65e3fdb1 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/64960f055177b1758581a84bbe1a16b3d0ae3c44 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/ea30a9e1a82916667ff5ed36bfad749d8f899db9 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/1e17607b4d7b87130147380b9871f208c3022d71 | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f122e4d4d22b8baaec09ed80e869b7a4310d37d | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4a043f2ffeb3a73270f1d01e0d1ba4f0cfde167f | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/e7055723d25ed69dd99e925a89245a1b813d1278 | ORPH mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e05f664a29362616f9627dd68546761697072cfa | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/382003ef07a97aeb0bb7d7ef121a75d4d2c2cec5 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ab3057ed2e04810f7dd39fc7bd93ab394c81e2 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d8f16746519e9cd8d7f78ee1ae349d708cfb7ca7 | sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8b04e4bb08458f011581e5b8bd762d82dfa2502e | mips | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/9e4cfcf9bc9060dc75928ef3d05b0618763bd9f6 | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6b11a0c296b322478379b6429ee8cec11365278e | mipsel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/465ad5639207eea66d34d54c9e784107ebfa15ef | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/cf1f26cbcda0cc4eb77841be2bd2c6e5e457411b | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/313106b9deabb7e022452611c1668a037f19d1ed | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f91d910fd96a904c319dfd10001bdba4df7786e1 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/003b1d284a677cb048909eeee840065b3f5a87da | mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29dbc9b703e4d260676a7d0133a8ee0055dc2279 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d1e0b1c31d04d195b96259c0f00ca3baa9211f0 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fa37ef3155d81a4e0143354fcb977fd3517e409b | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cba89d4b9653330204e3ad62457a8ef255204b | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/717da370cbf802e64500834c98c40a963823198e | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/960d3ab3b9fd6dd5f296290c96e7e1a4e1237031 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b74a446feb70cd317e3436adf27c081c8c01baca | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3661325262b9ef47c6987d6a157b9411c46be73d | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd4604b79cdc41c25275fd69308ad3d5a65d5ae5 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e8e4a30dc307b4e39f1eccf6eacd53d499384ba | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/365bc57a3c005e9ef95941bdbee536c90351037c | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c54ba9526ecf692c0b4211d1333e38b0be0235e | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3f9a2e51c3490d2af17a45382e7a0b2700078b7 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/347c2ead3bc4c65bace3d24a78be0418ee9c6fc4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d5768ee6ed410a52eeb31109d6c951bca75e24 | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/790c56ba756f7b2727dc42cbefdc4ce1ad73aff7 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/70b8d82e70a7189a371b61c2e5b004a3eb90bc3b | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/634cdfe13c3732cd50fdbf6da77e64f42eeb3d80 | sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/0d0bc6318ba9bc7effabdb7297f3e8023b3d3806 | ORPH sh4eb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/539f930a2b118b6ebd278b1012b39b8efaacffed | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc116876aef07804bfa0d080cc834ecf605de191 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f2e80095a7897cbc77fcf4158744dfcd58a0f40a | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/d2d9b9f2d5f54bf6c8efc472c1ecf5528248a3a4 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/bd2985ff1abd7c2e87901eb3ae48a3cd55a753e6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/49d337e820aec5753b8354ddc311ad36679140fb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9b4fc62db244d5e5717b3c0ceb5f08dd65a43255 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ec2d5cc354c78d44b3d54258a38f73cbe23342e3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cd5b18af08d3904c48b70c27978cb14fc0cfb457 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/578a8ec0c70d9bfa6e55ab30bac97ef9e9b47483 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/3f4ce666e21572b9be30b274db062488f9598d21 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2507575c2748dc37bf93f050e6538cd10b8ac8a5 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5037854bcbc6bb911746497fc425a9fd60413da3 | ORPH sh4 | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/84ae0e835458b620061480a1cee6d7073662fd3e | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3d6268c1f192b1c77032a668083f59e05f8913d0 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/82f93f6c46d80ae83f3b6b8c8d619f66287a7db6 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27165bbd6f26db75f81bf8bb503acb49b8886c91 | mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d81739b9a6dcbfab1a6b8d9ca53cf1b01e9804fe | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5cf6ec0a439e24a6233243571b5e5be8ffe78725 | powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d81e1a753bd5f58ca5bc13e4e98494bf60f08ba3 | powerpc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/79b4abda6f11028dfdc98aa75ccf45cf0f2dbc16 | ORPH arc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/ced239a117dde440a860a810bb41711cbe0f6aec | ORPH mips64el | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/48627c5f6c60270c397e475147c492575ea2a355 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/6ab211eda5c44f8874d5dcf870dc3aa84d7f3522 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/92c5bcd037e2db08f4235efe32b81ca19f1f717a | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/91bd438628c90501ae09620a11e94023f2b310d3 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cc4bf8840065d44d17cb5d839b3755002ac53e3 | ORPH arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/82ae6de2b3bc229842f6e0a2998c898e089220fb | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/66df85003589bcd46a02114796b1e2379df3ff18 | ORPH aarch64_be | micropython-1.19 | NOK | http://autobuild.buildroot.net/results/268774989beaca5743def80ce537e78d541bfcda | riscv32 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 | sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d5393ebd89661d828e4b49419dc3243fea942dd1 | ORPH sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5e73f06d67648d4509f360f9d554d7c8a8a9c06c | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/98792a0d9c7bdee7cf69496a72c0755163ea672d | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/4a463c951a104bad8713300fd194241e7ab0400c | xtensa | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/b39191876e8ea0871c811e3124c02f2c8fa93d50 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/485de47b0b5705fd536e41ef39cac1ea0cc580c5 | sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4f8b3e84866682b55de9158da0fee181f8f7bd8e | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4cd768ae7816f0f013a52b5e767b51bd96128953 | ORPH arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/39bd45498d0f77ace2051e7e8efd31dded8483df | ORPH x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cf1eeccf63591e723967dbc559fa803b24087520 | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2bc4a5cce9ff3c648a2869639cc9bc1ac4bedfd0 | or1k | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/ec4ea4cd308ec0c7b255f82139d98dc8881b04b0 | powerpc64le | pimd-2.3.2 | NOK | http://autobuild.buildroot.net/results/3718e26cfdeccd5944ad597317410670b9d06906 | m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/70fa54bfd4f3fed1c81f975b1ba096f9801f2841 | ORPH m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/16cf60497350567e6ee572351ad7873420b5dfb5 | ORPH riscv32 | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/01802ca182687fb2bb543872780672fe64dc93dd | sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/d72a9529429e83f69d8c7764865b989216f82b74 | ORPH microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/8a904d8a2fe4dfd2c5ed05a56d6b02a287b0a0ca | arc | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/f605a8f96e0ed6a012334fd1bc670be66f7c5ce3 | arc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/56a699cb30d8e5e289458941fa31cc005b0a2a71 | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c813606c590d73d2129a8b646e4b939bd9dd9660 | arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/134087dbff1b34db48ab750143b525d9a0383eee | ORPH powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d17d696d92876910d10785bbc10ead714d9800e0 | ORPH or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9b4a6d7473f9e66d93451cdc957ed9d21a759dd7 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3dc8eb0cbf842b57acac32a6903db67d19be7f41 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/4ae8c2b6fb85ede0441f26060b41e2e165c9c229 | ORPH mips64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/32d32af179bb65d5b1e6a0ffe10b424766201147 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8f497a06ce2f0490a0392ecc61241f16f8ca25b2 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6aaf002b7ae46f34bdbef2ac270abc3498c54164 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/59febc8843f821d9ef05ebb9d0d73d8a8fd47f7f | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8fca67980583f55333c451b2649141c5501cb7dd | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/88c9fa4a638eb68b3532b60fac8a8131da0a417f | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022c5748bf45d8d0b7bb3989b10582cc466f5af5 | ORPH aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a665c3ffc25ed125bc3ce945a66ba0ce89a87290 | mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7a258b4c8833bbd824d51bf3142ca93413677b53 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bd26fdf3163cc517c5e1b577a69d236eb21509ec | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44004a01a7f51b923ad43aa4dafbfc0ab2403e67 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e75c0a861c1573213f02f32a151772e60cf88db | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1ef855350a6fee35517e945efdda30746da690 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/76047421e7d9c79b02586b7d045a8e2eb747c9de | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5d67dcb26bebd0b0feedd9b676d005a25a3b7476 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a3eb12f4658027f54b8d8a725319241cc8252e2c | ORPH mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/cfbf5165e398749ad8d1fd458aae0f7c69d28a50 | mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b20980176ad32312a9655f9929bc0d720d3591c4 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/47cc493eb1421a4de6dfff7dfb7dfb3f30a0e702 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/d543de55a4fabdf59497b293dee2f6d22084fe85 | mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/94c25fcd43176197cc30b2a9a513598fe19da472 | mipsel | unknown | TIM | http://autobuild.buildroot.net/results/6945d36c9d3cf73a011e8cf6f96153ff8d847f53 | sparc | unknown | NOK | http://autobuild.buildroot.net/results/09ea50a1ef10edb8a5e6a6890e9945e81b1aff7e | or1k | wampcc-1.6 | NOK | http://autobuild.buildroot.net/results/83efdd2c0b14d89e6304986cd26716be680723a0 | ORPH mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c9aabe19e7c3f048f4a11cdffd6a44d24f444c05 | ORPH mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/281e35a765b87334d51e268a2b9a475ba134de68 | i686 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/614ccdd145a34245b4709fd123275de7a4469c5d | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/886953ea2c98983b9a46660e4975b1837b18804b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/68c23c82c647e333df9fbdcc762158454cf052ef | ORPH aarch64_be | znc-1.8.2 | NOK | http://autobuild.buildroot.net/results/5f4569df073779ebf8e975a45db1dc36f20742f5 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/09d720ffc4f204a28f0f8f9bdaaaefebfd15a07e | Classification of failures by reason for 2022.02.x -------------------------------------------------- bat-0.19.0 | 1 igd2-for-linux-2.1 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/cb9acba896fa13752389d12f19cbb66f0a02ecb6 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/30881ec6d4fc9f89085322b48da8e5a0da0073ff | arm | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/db0ec450302f68c9296df20413199aa67a7f040e | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-rust-1.62.0 | 3 dash-0.5.11.5 | 1 host-gcc-initial-12.1.0 | 1 host-pahole-73383b3a39afe86... | 1 memcached-1.6.16 | 1 open62541-v1.3.2 | 1 pcsc-lite-1.9.8 | 1 python-sip-4.19.25 | 1 toolchain-external-codescap... | 1 unknown | 1 xxhash-0.8.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d665ea8ab6268e005771265c2624c4043904db02 | ORPH x86_64 | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/4348a0689297f08acb892fb2f2a08e8ed5e63498 | i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/895f6959611517f8d99ee65f7e3ecc4ba7517402 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a2b720a935fafc7ad1b8489b5eddf167f73e7e62 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/98ff904509a1ba8b798a528a98ba927a9a377efc | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/67ca94f3febfb66f70638878e0d9f5f0c56de08c | m68k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ddbd4c53aaa695c29803da1ac139d780bf2819a5 | ORPH sparc64 | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/c90412a1debbaa80dc57054f30b1768d48e14412 | ORPH arm | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/bb5e7d4021c58d7a357ce39338ba317ab893f3a9 | ORPH riscv32 | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/521e5f6becebf76d5319125ae674c11d19c27636 | mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/891c0be7bb164c0f03ef0b6bf59300293d5ec3de | ORPH sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/07a9b305257eb99fb60538a74134927d36ad7356 | powerpc64le | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/475d838916ea743f390f365e13acb87d1a27eefd | ORPH -- http://autobuild.buildroot.net From jesseevg at gmail.com Wed Oct 12 06:43:53 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Wed, 12 Oct 2022 08:43:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6: Change license hashes Message-ID: <20221012064353.454369-1-jesseevg@gmail.com> There was a major rework of how licenses are used in the Qt codebase along with a new location for all licenses, so change the hash file to reflect these changes https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 Signed-off-by: Jesse Van Gavere --- package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index 5dd26973fa..b004347a5a 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -2,8 +2,13 @@ sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSE.FDL +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb LICENSES/Apache-2.0.txt +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 LICENSES/BSL-1.0.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc LICENSES/MIT.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index fb1b3dcf6b..887f67b2ae 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -2,8 +2,10 @@ sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d LICENSE.FDL +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt -- 2.34.1 From dimi at tpm.dev Wed Oct 12 07:54:22 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Wed, 12 Oct 2022 10:54:22 +0300 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 Message-ID: <20221012075423.14729-1-dimi@tpm.dev> From: Dimitar Tomov This patch series bumps the wolftpm version to the latest available and adds one new config option for controlling debug messages in wolftpm. Signed-off-by: Dimitar Tomov --- package/wolftpm/wolftpm.hash | 2 +- package/wolftpm/wolftpm.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash index d24df58eaa..e256967a01 100644 --- a/package/wolftpm/wolftpm.hash +++ b/package/wolftpm/wolftpm.hash @@ -1,4 +1,4 @@ # Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolfTPM-2.6.0.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index 7e8a108585..f217322545 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFTPM_VERSION = 2.4.0 +WOLFTPM_VERSION = 2.6.0 WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) WOLFTPM_INSTALL_STAGING = YES WOLFTPM_LICENSE = GPL-2.0+ -- 2.27.0 From dimi at tpm.dev Wed Oct 12 07:54:23 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Wed, 12 Oct 2022 10:54:23 +0300 Subject: [Buildroot] [PATCH 2/2] package/wolftpm: Add new config option to enable debug output In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: <20221012075423.14729-2-dimi@tpm.dev> From: Dimitar Tomov Signed-off-by: Dimitar Tomov --- package/wolftpm/Config.in | 5 +++++ package/wolftpm/wolftpm.mk | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 7ebb253857..4e712d0afb 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -35,6 +35,11 @@ config BR2_PACKAGE_WOLFTPM_NUVOTON Enable support of TPM 2.0 extra functionality offered by the Nuvoton NPCT750 chip. +config BR2_PACKAGE_WOLFTPM_DEBUG + bool "Debug output" + help + Enable debug messages in wolfTPM. + comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index f217322545..398fa668af 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -47,4 +47,10 @@ else WOLFTPM_CONF_OPTS += --disable-nuvoton endif +ifeq ($(BR2_PACKAGE_WOLFTPM_DEBUG),y) +WOLFTPM_CONF_OPTS += --enable-debug +else +WOLFTPM_CONF_OPTS += --disable-debug +endif + $(eval $(autotools-package)) -- 2.27.0 From peter at korsgaard.com Wed Oct 12 08:26:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 10:26:45 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <8735bup3qe.fsf@dell.be.48ers.dk> (Peter Korsgaard's message of "Tue, 11 Oct 2022 21:19:53 +0200") References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> <8735bup3qe.fsf@dell.be.48ers.dk> Message-ID: <87tu49o3ay.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: >> This is currently the latest version in the v16.x branch. >> Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations >> to resolve conflicts with other unrelated upstream changes. The other >> patches are simply refreshed. >> The license file is updates due to: >> - Reformatting changes >> - Addition of the mention of some files being under GPLv3, but it's >> only the autoconf machinery: aclocal.m4 and config.guess, so it's >> not relevant to add in our LICENSE variable. >> - Addition of the mention of another file being under the MIT >> license (install-sh), and MIT is already listed, and this file is >> anyway only part of the autoconf machinery. >> Signed-off-by: Thomas Petazzoni > Committed to 2022.08.x, thanks. I forgot to mention that this should have been marked as a security bump given the security fixes it contains: https://github.com/nodejs/node/blob/main/doc/changelogs/CHANGELOG_V16.md#16.17.1 -- Bye, Peter Korsgaard From thomas.petazzoni at bootlin.com Wed Oct 12 09:36:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 11:36:34 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-10 In-Reply-To: <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> References: <20221011084540.jebe33uW@myt6-3efb34da3dd5.qloud-c.yandex.net> <14ff4a72-41f4-256c-aaa9-b1948391ba6d@yuriev.ru> Message-ID: <20221012113634.1ae5d496@windsurf> Hello Leonid, On Tue, 11 Oct 2022 14:11:10 +0300 Leonid Yuriev wrote: > Please fix the configuration error of toolchain for microblaze arch. > > I already wrote about this problem at the beginning of the summer, and > then changed the diagnostic message to make the error more obvious. > > Basically, the failed assertion (see below) checks that the width of > l_start end l_len fields of the struct flock are enough to hold values > of off_t type. > So, the libc in the toolchain is misconfigured or/and has wrong layout > of headers, etc. This particular configuration was built using the glibc C library. If you believe there is a bug in glibc, I would suggest to fill in a bug report at https://sourceware.org/bugzilla/. Thanks for your help with this! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From neal.frager at amd.com Wed Oct 12 12:36:51 2022 From: neal.frager at amd.com (Neal Frager) Date: Wed, 12 Oct 2022 06:36:51 -0600 Subject: [Buildroot] [PATCH v1 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221012123651.4218-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware It will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch enables a pmufw binary built by petalinux to solve the issue. Signed-off-by: Neal Frager --- boot/uboot/uboot.mk | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..136cd9e306 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -392,8 +392,17 @@ else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) + +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) +UBOOT_ZYNQMP_PMUFW_CONVERT=y +endif + define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), + $(CROSS_COMPILE)objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From aperez at igalia.com Wed Oct 12 13:05:46 2022 From: aperez at igalia.com (Adrian Perez de Castro) Date: Wed, 12 Oct 2022 16:05:46 +0300 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 In-Reply-To: <20221010064610.388468291C@smtp1.osuosl.org> References: <20221010064610.388468291C@smtp1.osuosl.org> Message-ID: <20221012160546.GC2476394@igalia.com> Hello, On Mon, 10 Oct 2022 06:46:03 +0000 Thomas Petazzoni via buildroot wrote: > Autobuild statistics for 2022-10-09 > =================================== > > [...] > > arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | This build failure is due to an internal compiler error issue which I have seen reported elsewhere [1], and the fix has made it into upstream GCC: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9bb20299ba1d1cc3bbd83a07a777fcc5a93cfeb0 GCC 12 should be unaffected. What is the best way to fix this? Should we disable the brotli package when GCC 11 is in use, import a backported fix to GCC 11, or...? Cheers, ?Adri?n --- [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/398 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: not available URL: From giulio.benetti at benettiengineering.com Wed Oct 12 13:17:14 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 15:17:14 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-09 In-Reply-To: <20221012160546.GC2476394@igalia.com> References: <20221010064610.388468291C@smtp1.osuosl.org> <20221012160546.GC2476394@igalia.com> Message-ID: <57364e0f-3e7d-d056-60f0-f935395d82ca@benettiengineering.com> Hi Adrian, On 12/10/22 15:05, Adrian Perez de Castro wrote: > Hello, > > On Mon, 10 Oct 2022 06:46:03 +0000 Thomas Petazzoni via buildroot wrote: > >> Autobuild statistics for 2022-10-09 >> =================================== >> >> [...] >> >> arc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/a770002523411328c6933158461a007d07305c9e | > > This build failure is due to an internal compiler error issue which I have > seen reported elsewhere [1], and the fix has made it into upstream GCC: > > https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9bb20299ba1d1cc3bbd83a07a777fcc5a93cfeb0 > > GCC 12 should be unaffected. What is the best way to fix this? Should we > disable the brotli package when GCC 11 is in use, import a backported fix > to GCC 11, or...? You can try to work-around it by disabling the optimization, check here as a reference: https://git.busybox.net/buildroot/tree/package/brotli/brotli.mk#n20 and to do this as you can see you have to add a gcc bug like: BR2_TOOLCHAIN_HAS_GCC_BUG_68485 Then, since there is a fix you could backport it, but the problem is that external toolchain won't have it so it will fail anyway. Is this gcc bug present only on gcc 11.x? If yes I would only add the workaround. Also you need to check if gcc 12.x is not affected anymore by building brotli package with different Buildroot Toolchains with different gcc versions, like gcc 10.x, 11.x, 12.x and see the result. This is at least what I usually do. Best regards -- Giulio Benetti Benetti Engineering sas > Cheers, > ?Adri?n > > --- > [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/398 > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Wed Oct 12 13:40:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 12 Oct 2022 09:40:05 -0400 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-11 In-Reply-To: <20221012053648.B5A9540519@smtp2.osuosl.org> References: <20221012053648.B5A9540519@smtp2.osuosl.org> Message-ID: On Wed, Oct 12, 2022 at 1:37 AM Thomas Petazzoni via buildroot wrote: > > Hello, > > Autobuild statistics for 2022-10-11 > =================================== > > branch | OK | NOK | TIM | TOT | > 2022.02.x | 10 | 3 | 0 | 13 | > 2022.08.x | 12 | 13 | 0 | 25 | > master | 100 | 752 | 9 | 861 | > > Classification of failures by reason for master > ----------------------------------------------- > > glibc-2.36-44-g2628500f5dff... | 375 Most of these are due to a glibc make 4.4 compatibility bug, started showing up after I updated make on my autobuilders, it should be fixed by: https://patchwork.ozlabs.org/project/buildroot/patch/20221010003515.796446-1-james.hilliard1 at gmail.com/ > host-gcc-initial-11.3.0 | 32 > bearssl-0.6 | 30 > host-binutils-2.38 | 23 > ca-certificates-20211016 | 20 > crun-1.5 | 14 > coremark-pro-1.1.2743 | 13 > host-f2fs-tools-1.15.0 | 13 > host-sentry-cli-1.59.0 | 12 > berkeleydb-5.3.28 | 11 > brltty | 8 > libglib2-2.72.3 | 7 > dieharder-3.31.1 | 6 > flite-2.2 | 6 > host-gcc-initial-10.4.0 | 6 > host-gcc-initial-12.2.0 | 6 > slang-2.3.2 | 6 > efivar-38 | 5 > host-binutils-2.37 | 5 > host-gcc-final-11.3.0 | 5 > igd2-for-linux-2.1 | 5 > libnss-3.83 | 5 > sdl-1.2.15 | 5 > sysvinit-2.99 | 5 > autofs-5.1.8 | 4 > btrfs-progs-5.16.2 | 4 > gerbera-1.10.0 | 4 > dash-0.5.11.5 | 3 > fbset-2.1 | 3 > gensio-2.5.5 | 3 > host-binutils-2.39 | 3 > host-pahole-73383b3a39afe86... | 3 > host-riscv-isa-sim-1.1.0 | 3 > host-rust-1.64.0 | 3 > libsvgtiny-ea9d99fc8b231c22... | 3 > linux-6.0 | 3 > musepack-r475 | 3 > ocf-linux-20171122 | 3 > dahdi-linux-5c840cf43838e06... | 2 > dmraid-1.0.0.rc16-3 | 2 > duma-2.5.15 | 2 > elfutils-0.186 | 2 > gitlab-runner-14.5.1 | 2 > gmrender-resurrect-0.0.9 | 2 > host-go-1.19.1 | 2 > host-protobuf-c-1.4.1 | 2 > libarchive-3.6.1 | 2 > libcurl-7.84.0 | 2 > libgpg-error-1.45 | 2 > nanocom-1.0 | 2 > perl-5.34.1 | 2 > pistache-3ec9d7c4f8b828fdd3... | 2 > refpolicy-2.20220106 | 2 > toolchain-external-codescap... | 2 > traceroute-2.1.0 | 2 > uclibc-1.0.42 | 2 > unknown | 2 > xenomai-3.0.10 | 2 > zlib-ng-2.0.6 | 2 > /home/buildroot/autobuild/i... | 1 > /home/buildroot/autobuild/i... | 1 > /home/buildroot/autobuild/i... | 1 > 4th-3.64.1 | 1 > ace-7.0.6 | 1 > apcupsd-3.14.14 | 1 > bat-0.19.0 | 1 > batman-adv-2021.4 | 1 > bluez5_utils-5.65 | 1 > botan-2.19.2 | 1 > casync-4ad9bcb94bc83ff36cfc... | 1 > check-0.15.2 | 1 > dropbear-2022.82 | 1 > erlang-22.3.4.22 | 1 > exempi-2.6.1 | 1 > fdk-aac-2.0.2 | 1 > ffmpeg-4.4.2 | 1 > fontconfig-2.13.1 | 1 > freeradius-server-3.2.0 | 1 > frotz-2.54 | 1 > frr-8.3.1 | 1 > gpm-1.20.7 | 1 > hdparm-9.63 | 1 > host-delve-1.8.0 | 1 > host-gcc-final-10.4.0 | 1 > host-gcc-final-12.2.0 | 1 > host-gcc-final-arc-2020.09-... | 1 > host-gdb-arc-2020.09-releas... | 1 > jhead-3.06.0.1 | 1 > libmdbx-0.11.11 | 1 > libopenssl-1.1.1q | 1 > linux-5.10.145-cip17 | 1 > liquid-dsp-1.4.0 | 1 > memcached-1.6.16 | 1 > micropython-1.19 | 1 > mmc-utils-d40ec535b9d4e4c97... | 1 > musl-1.2.3 | 1 > php-8.1.9 | 1 > pimd-2.3.2 | 1 > poppler-21.12.0 | 1 > procps-ng-3.3.17 | 1 > quickjs-2021-03-27 | 1 > rauc-1.8 | 1 > sdl_mixer-d1725fcb7c4e987ae... | 1 > systemd-250.4 | 1 > tealdeer-1.5.0 | 1 > uclibc-ng-test-0844445e7358... | 1 > wampcc-1.6 | 1 > wavemon-0.9.4 | 1 > znc-1.8.2 | 1 > zstd-1.5.2 | 1 > > > Detail of failures for master > ----------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/790fd9637c8bbd353e6d859db64c854fe2a4fad9 | > arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/84d2518c75cbb6a617eadfc40f9ffa042aec0989 | > aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/143430b6f17256fce77453ba6e24c7d26517cb11 | > mips64el | 4th-3.64.1 | NOK | http://autobuild.buildroot.net/results/ca03fa3bb1cf32ff8154b382d5c4dd5f9bd71939 | > mips | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9b7d88d647c151df2c8888ccef4c2681d9540534 | > sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/562031e3a06287ed544072b3b40e1e98460ea53c | > microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad184e25dee469d5573b0fa208da3fa888100e27 | > arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/151970c0dd2b244a1983dc08033581342c787e9e | > sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a3203ad10ddc5a382590635e005401f54469f0c4 | > microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/17ffbb1cc5b104c9a090e999cbb91b2648b60369 | > arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c539423c3f79298e0ccd32f6d0dda7ebad376638 | > powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/de42234cdcfc5310bffdbc9c46d05f6a3e5586a3 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/99205c6394261837a42dc30c488a3b25c4d0a44a | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/921a75548209405ac869c600fb5afa67968cac47 | > sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f41594b362de9d1c51534c91ba8b9d60703c5d6 | > microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6bf0f2c716091e3503200a2d4ba7475b021a58f | > armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1831be6c2a55e4ec9ed0cfda464f9ccfbeb96e53 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/85fe224a559e9cca3abcbeb018988d342183f8ac | > powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/295ecd7d8630bf4ee77814873f0cd413bc4b77d8 | > sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b6d9dac7e28093a40596baef54de42eb770e1ea3 | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5ee2e174a7635d90395603289675432df00b5075 | > riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0d9a69a014a3deb4e6caa879d2b0224f100b6414 | > powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/703d2dba1767f94150bb36333adaaba2cefec1c6 | > powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ab5fe6b3fd7cfe71e961b330b027995d834a5ea1 | > nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a08032c678483768ab0839c176134c29838052fb | > xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b354baad99fda87f88318abed8cfe93435f8c2b5 | > i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/389a7e8dd448e01c5088793e59be1354864a3a8d | > sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ae510ca630a71b9f459783ea0901c8bbe9efddef | > arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6b8cfcb36bc32e39fa9f6ee539915e3fb430cd2e | > microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4f1f1810cca2f7deb5b311bb19668adcc301c8e1 | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/317820f04974e3a712808385c18a82c15af36431 | > aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e79e9ad340a043f09f9e0c891250bbe04ca343dd | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/34a33d647e7e23d8640368fa20a87d5d318e5f9e | > or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a4ac22c7fe2377a338b4a5e0e607f4ee9dc7067 | > mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8cea6e3c052768f2a58baf1a389d9b1cc3430943 | > sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c786e3a89b930480e60b14377b2a01261604dccd | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a597c19fb8cdb2acaaa9cf0721741ada3e874e12 | > mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/35d0f632942150edd040e17389199ba04d92beed | > or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56bb0b11b0c18c2f6cd93f5714db69098532dff5 | > mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dfd85db7add2ae8f5568b8c5eb96c7d5ebefcb99 | > arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/23fbed310b2e18db46677c919f37a4f980410ff9 | > aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/56be9856023e6526c33cfc8244c91cec8de7ce41 | > mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/feb913606e115edb5031619d3c419e2d4a379961 | ORPH > arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1006246752ac677682c2438c506854aa64db5a10 | ORPH > mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/99928f58d16b54b42f3f6bd5280d0e43e6359cc5 | ORPH > mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/19679a8648dff153b728df3936bd0dccad376c5c | ORPH > aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/921a0fa9b981e74c658f5e1f48fe5ac31e57a0e7 | ORPH > sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/780c30d345a0540c4cf473bc9b17f3844530d23d | ORPH > arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/13df746762d022684d37bfddb4114dee3bdc1987 | ORPH > m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f63738733d11095a358d63567299827c08662083 | ORPH > or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b7c6b02b1afdf2b9f4c4182bee9d17cca8a6c775 | ORPH > powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fb9310781efa54fefbc55b1a62e0aac606047869 | ORPH > powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e4a5e4b469fa0086e57f0cc9add62c77e147e3eb | ORPH > sh4aeb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/deb27089f2c94969383d3acddb6e4d8e5e66c16a | > aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/1d886c3089d67e8907dcd61075c0904e93e55f01 | ORPH > sparc | brltty | TIM | http://autobuild.buildroot.net/results/cc51db61d23c5553ab8489c241154ef4dbffdc3d | > mips64el | brltty | TIM | http://autobuild.buildroot.net/results/f37b7d3826505699989f833e08494e5e5ff8e834 | > powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0346a2fa4ecf51196b2c3570362affa30f1f2b24 | > aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/4dd2d28f946cdaa83d0d5acb4795f260424a578b | > i686 | brltty | TIM | http://autobuild.buildroot.net/results/0d810013e82d88e7e052a913103462aa7b9a3388 | > armeb | brltty | TIM | http://autobuild.buildroot.net/results/3a7fcc06550a3bdf902d0aeafcc7de93d50f358a | > powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/329e426588507e977a329ab9013d8cc1268dbeac | > x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/261ffa03a739ce689fff825b355a36b20a2f0145 | > aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1ba1c19c2e5e8630c8633f326073eef8b6ede5e8 | ORPH > x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/97f96b4e026c6165cb41238a5d5f92fc70020ecf | ORPH > arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/24ce03d937582846b93500a86baa10e6e1aa8e25 | ORPH > aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b7f2827712a35b78039bf556aeded9f6dabaa796 | ORPH > microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bac3dccfbc9bf3048e7c551b30a0e1a4302e8152 | > sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97701df77fc1dbc7ab7dba521a76ca3e38dd8912 | > mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/93767e568b51622ea3d4a95afb411384a578a5f2 | > aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a2f5f4d7bd6cdff954672c79a1611edf15265a0f | > arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a72f7e0dccbd469fd51d377f645efe366e5a3df0 | > arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9fc3111c5ef6d606c14c109d82a845cf51d5965 | > m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e79f9b6d2a4a94ef933c77abf781a0a31ae46813 | > x86_64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/edefc59ddb4cd65509f6ae2cb9f6fee5ba6837ef | > aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/537da7f95f7b37031d7143d13b36fbd3a4f97acd | > arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4e717e47839dfb34487c7b186636e03efb1544de | > xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9b7935e00f3494cd16bbf6461a4f87eb0b27ce59 | > mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae35248b608d6ca5ddec053090eba4d61813cc78 | > arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bdd3bfe442562c59c7ef9792715fa6d1b4017f66 | > powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b1b1a3f32ccb4bbad188034142b10bfb73bfe18 | > or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a06264c8fd1cc718ea0e4fe9f876f27831d8c765 | > aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fd8aff30a8e5d726b6d2d2ef532bf412df8f58e5 | > mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d7206649f7beef443c5c063e76d1d9aa07420ad8 | > powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c9fab74d89d42e448f4a047d5e485533bf32cb0d | > mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2ac539fec76900f7e1bd3bbc7ecd04348cbaf309 | > riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1c68f8e1067f90ca9f44788f6d5c701d298010c3 | > i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2aa328c22ea6ef21a8f8a6716bf92c47b49fa685 | > powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/3272f3c49d9d078c9e9ad4ae3c57476fde30d52b | ORPH > powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a4ce2bf5da54beb72064b143a75050a439208d33 | > sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a393838e5bde026441d3283c1463dade0983e56b | > sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6112a60828ac6c8765f9f93603ee30c928c2037 | > s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e7583a8e6feb62737b229ad5a09e2c1baee01baa | > aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a1b0462bc20f791245d0b47051a9a478b94455e3 | > arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2b8e33beead0c006b3d2b2264fe125d6ae670940 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/62ccf8eb674edd2bdd5e39f37bc7c17cc94e3ab6 | > arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d67adb8ae6b8696173544d9bea097013951c3cc6 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/69b525ffbbbfefc6d5f8b51bc1e5cff64e99e7f7 | > sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d55fa9f049882c33c2bbb977b919c3ea70f33a91 | > m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/01c3cffa50d7ab7cb6dfe4480a921785a021e7f7 | > arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7e4c74c23cc44326e817aa49591158edb0ae09f3 | > powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cb071dc01a3013177f61d42df091c989d1bdb60f | > armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/839a08988aad929fdc913372eda4cb87b4835ace | > mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de4548e9f67521282fd613fdc03ffd3b3ae6a8 | > microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20e2e5527bcb40f3abda961c66a0061ef3c4e82 | > arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d865eaea5fd7065770edc925e96c825538fb5ef8 | > powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2f3adef20f6e97ce847b89341a4072d054287c75 | > sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aa6a1b08eabdbb785ecda23b835c27d5ddd6a696 | > arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8fb51bd98aada4fa235509f0cb01a53db24860fb | > xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/29a152c67e14984621088524ba3bbdfa7ccfeb76 | > xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/18fcc3777a162bc13e296b5dba76288b084ebfca | > armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fb53c8cb6ad0143acc60ab67d4f42410f0ad27c4 | > mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b51c6e7b1c07129ec291a90b6414b640a3243a77 | > riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cf4eb323c8898426b209b638fd9a16799cf9579 | > or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/484127fdc4bc9a83456e72a88fdabb89454b919c | > s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3a8f09086d881d6462b8ca2746a502d6bc1846e2 | > xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5c2d0b6493ffbf52e9627e5d65f7b80681d5869a | > riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8a957e8aeef0400a49f057d0587d3d5fdb771849 | > powerpc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a2bcaf4556ed797dd8c5b622bb0c33c17da4afe9 | ORPH > x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e4c6830e947fc9a01bf03fcc85490e15864bb0a1 | ORPH > mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/045a4049ae7bb2e7000feda1a3afb17b69f0d2e8 | ORPH > arceb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ea7b9e130c7c82933365e66ba7a511731b71beff | > m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7be8b87cae2f75f5fe836a04df54b72a95be780a | > microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d8a62b292b68076f4ee1032d6ff58ff5b6fe1013 | > arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/2df0e815574d5b1e228a4854d502599a5523c757 | > arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e832f4c0e39fb879d243a908630af9ec6d6eae4a | > xtensa | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3170cf77eed465ed6078be52b08e2c90bc326732 | > arc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/99522bdfcc195585aafb40d738b95d1e5c9e5980 | ORPH > mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0ef821cc9f725d0812bb08f5c28a5c486688cd02 | ORPH > riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/50a6580fa85f87ddc6b4ba69dde0c7ced2ce6d71 | > aarch64_be | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e9527fda55c5aede1a998f87077314f5436793b9 | ORPH > arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4504eb874b6327efc587b0ccab9ea9a0b3baa34 | ORPH > mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/afb2d3014e60410a5c08cf02ff1a959bc8ff4ef3 | > x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9ff45e12e4be0f4254aa7034ddfbc2ca0cc91956 | > i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a9e8b584fb65ac475db9ccd362323ac74b49e1f4 | > arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/b45c7b3c6d15a37846165f14a14ae95e8ba1bc25 | > aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/72004e0791681dc8beacf60cde1056a1a83af177 | > microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/6f440ca4d36579026ea8d1fd45d8f80dd17f093e | ORPH > microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2582d40ccefd446fc347bd1388ce92c99a0f82ac | ORPH > mipsel | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/b227bf90f6b7c9fe3c779045f8cefcaf3c152fb2 | > mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/53d17d65c80dfcc1799592de7aca618cca2c3e20 | > arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3f5d5e7fbc07e534918d0109953ed7a9c458243a | ORPH > mips64el | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/993a2397c4ec92d2c751efa9d115dd9b2c43fe19 | ORPH > or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/709e7c4025d027766bf65d1195baf49072a87750 | ORPH > x86_64 | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/11a56833280bb781a175746977a1fc5ab59d5499 | > aarch64 | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/789215d1a24ee66cd8ec1e74eafe155838b668e1 | > nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a5069e0c7dbf4d74d8c2395ce874bbb5e106eb25 | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/ed0a326f68c429ea95da0b8b0376454b7e39947d | > or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/a17130de81e242eb9fd34a95b5e27b834021da6f | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4e3962cbcd7ccb22f8b6093ce6ed7fc7e0c2f139 | > or1k | flite-2.2 | NOK | http://autobuild.buildroot.net/results/c06b42efcd0da915da740fef3fce0fea1f05aef2 | > microblazeel | flite-2.2 | NOK | http://autobuild.buildroot.net/results/eeeae56a9723bef13b397167ca433cdd2cf933bf | > riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/16f0f845d3f84823c0e7e9fa9743f0f3d8a97adc | ORPH > powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a24f98091db6bb0e890feb72638b96d3c32cda07 | > arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d0332c6b8d3253214e0c912a36dc68d56d0b5eb0 | > arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/d30d43a9cb694555e79f8bc646ea8dc9ea2851dd | > microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8ed57e6ba7354cb8dc2ef9bacc81f82ffd0dc59c | > mips64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/afb47a30e019eb171851ece2c2c1b4cdfd96cf33 | > aarch64_be | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d0f1bf9784436978f0fc3abe30ba43f6cccafc30 | > powerpc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/96e40521e06da675e1b3bcd8452d169b6f5309bd | > aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/926a4ee20ea69e45156c78a7f78bac962ef9d55b | > sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cd7b1f3b5fb868a85dbcf8af0ffdd75674bb5f2a | > sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/252716069f100a0e8161beb909ea303d47526b73 | > x86_64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/aec701e2328411817b19b6c85c2e04f5bf0e9cc4 | > riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/a5f06c86470af298491e359a1c667a8677dd2e54 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b8449ce4a0701d6b6853f0a684985d4c6abfa97 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d3ab471b470540dfb0055f3942002bcf697624f | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bab8058e8a6ad545e0a85f19a6521287b3b6eda8 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e79a959c4c81dd0cc660d3c82f36fd84003e1c1 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be0f3a99ca1135d1d64971b71051e7c686866497 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6100b93bd310d24df7b9f5f1091a767ae666f427 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d14af6bf6cc3cf219fcdce86e19d92cb4a757e50 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6bc19f452dc73039467420ac47c01b776fdd36e1 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ec083468463bc4fc50a21066018cbc73fd54503 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f41e97f808785401b708e795b8423b21d19991f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7994d0025251175e4243701171a6b7210b8dbc16 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/197760dbbe212de2206e842c152a3eae100611ef | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/579408bf8be26c705ee623603f4cdfd650286957 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5426e18f67c88eb70fb3d1188c876a9c28da995 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/227b55f86346bb802e07be5f3be1f3a4060481b6 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7e191fd726ab704cb572a9aa235aa93eb87403f | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/824fd54cb9fd6809164860da9838a86389283e5b | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc0cd8fd99099e557ef941d0b62b890d99cb073b | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a755d5edbb57adb4bfe390bb2d18b10fe910ea | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/869daf57e80d3d3cde4b8696e7b6e63f635dc06b | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce5a7463d1b835868a3dbad0e41069afc3f9ba79 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0043357ab7ac15e35f70613f7cd0229e472023b7 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09e49a679e03b5ab3bf1ed01fe4780854ef84bc8 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fbcdb0dcf52094181b1d69be7735b04e3d30d3c | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f1f1f080ac92b67dac4265121a702bf01d606f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d10d8baf5ba6599fa65f1811d832519336e91bcc | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97eca688cd177f750c3cadca2ad1a0dacd41d80a | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f46d1496ae8da5f85c4fcaf1b4e41a0fa58387cb | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea2409526df5c15a6c13158bd0f5babcaec9f0be | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca0eb3c2dd1b12fab4f584b082013cb907f056 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e03d82c56e8c43448290aa15df69dce3453aec41 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a0eb08a321860784e995c5fb2909cc3def409d | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18f58b9f6a351519c81d2c3c774f6bba7ab7c981 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6877a9cb7e989ac24c771e21e13afb26bb1410f1 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5bffb780721763b384e84538c436d3f68e61c2c | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e67f1a5c5afe559d43686b9005158d5d5bbb30c | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6544f70979d3e542eff1e34c33e41c5c80c3231c | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fbd5d5877126e102098247265e05901b8ec8fdf4 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/132a75774fe8cf15a94861da3ecdd2d3909d13dc | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37e17c3af02d4f6bec452cdb9a783d54178fd983 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a8a904b51b5537f3ee6d94905bbc81a6638e6f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ac8095e3a920e561ae71513fabda6766546065b | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7ee3b7a9aab40f8c26042879524b52facc49437 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b2cf8bb94cedc078c482e7fb711bae8a9e3c60a | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9fc0da2baa6227b56e1577df80222bcbaecdf95 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72efc20d3df70bb90aa2a7d1502309162211f692 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a984cca0c7633d6240e5385236298a06d56ce636 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1132401325aea012031c704cfb125140881817c | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e061bb7a5a013c12491375ec0f47c8824d5ba8ce | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92cc31862fdb127a2e037bd57f0b8980d4dfbcc9 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9c676aaa7b32c3373e52fea0f81d5b5c42e6eb | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5b7ca2e836f7f735af00da34ec556948e9754ee4 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/753d83439e284aee147f43ce65ef36a9789c5fce | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/169c25f3d5c72ab53e50ba874ceb10807eb63771 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb5dd02f46fb07aff26abc50bd3f59dedf5fefc | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bdb0dd286fab729e28658222330f8a06df2ddbe | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8f099f608ef9e9fd42fe528baacafac72218b50b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8d0d3ab0b8ea3b79f5bdddc9fd1aeca5482f2662 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e517fff50e0402309f8b143991f972bc41b9a26a | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/844c28be7f81cec0288242efdf66b7feb3b10934 | > arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4357f40408a1efe90f126a7f4784af1c153629ca | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2592df306b91d3e1115efd026cd32173bcc20413 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92adf732c43cb97b96ba7a4bf383a3fcc4d83a2f | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9657daa044fd9404e4067e1419d6f5b68153d1f5 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15402c37f18d5283676b77b085489ddde6d6017b | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18062b80dfd9d3822e3ba2c440d2fc87b22d9ba4 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/32071db54d552586b87b340af2083ad884429553 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b792116457696a4ba6ffd2b461cc3b81af991e6 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13c87c2db1cfcd46fdbb364eb3ed1bb053d783a8 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca918494d0ce5445f41f7f51f9bea31a5e81b2da | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b4346a4f91849f6599ee531fe789dedf88bdce0 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93da532f18bfe66025ea12e7aa225a347c43d790 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae14c6e7ae9bbb495ac4f58abfd1e76236d85b3 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0d865c91be2760b3de130790c9a03003e3444d6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/290aa1bb2d3ff882ed7b673d559a2fbe3f99dec4 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3a5db26357700cae260639c6a6d018d8a513f0 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5175dc0c2476bc3505b9d2c36150c319b49d9c84 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/811a77851fc77577c8b64a3aa383833ff23006dc | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8556b25bb120790eaf470826b74f155d80468bf7 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e8b67631dad47bceb27980653d9aa6cd33756e5 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa641b1f45cd45893b0237ee8d7acac530155a4 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a5b6e22f567f2652fe12c667c1458d907dca008 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd197803491828ecd255f178ab359dc758b6d551 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90f7fbc896d78e5db954be1a0662eec9f94efaff | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b2eb56b509940eb2db2084a597cc4b3a7b889ddc | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62ff8be7c0942dce808bc3d8911b589930d62003 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/932b53100fb00ca419512b1a527d52c1a97d4060 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6556d0e82f8a07867624c7492e94608c6338927 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59e2cc31fa7583f5a88637a1b55894387a14aff2 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1e63364e83486dfa37fc53fec2ae1365b6df821 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93012f360497d909f401972dcbcd7373ef956650 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9dfaa1ef64cd1b35f469c76b91c701a2f640d42d | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ea7803178d80cf14d6d54944e2e01727434f5cb | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4aba9ea2ab12569869179cd24ada8bba3c509b | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e2498666801200e7b614250e8077afc3aca86b3 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ea1e8ae07860af9af27797d0dad07a3718101af | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/320d81f4e574af1fc3d2ca03e1fd013f946cd8fb | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed4163fff6eecf41f2adb67ebbb0ff46c4ee067 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/abbc4e64ba2a3dd11a9712bc42d17067bfd09bec | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34084d48682ba7b3ffe3795eb7d9c9d6021d2106 | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80346009ac641bfbb1b3b84a9dbd673e77f43aa7 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18a5982e523d3ab1b594692d1b90ab45b5499e1b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/638c11b8feb97b4a848591f01d441e1bc77320fb | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fed2af45405686f7a1d916c4a468e8dd934c0559 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fadf874a3b909dbda16e5a5ef9e740b6c841e06e | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69dbc2472d1265ba8757310766f5cc505ed10a7a | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5e8b7a6bb748491716a8239fdfe20d28732ca0c | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769b94b93bd26d200ab5a2dd0294c1592dabbb00 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e2119de0ef22de0c8294b7e3a2d9e58f8d76db1 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/647d5376a2b18bb0cd7b0f22d4f9b496c13cd2be | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2695ca219a4cec71b520959ee970cfd187fe2cd5 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9679b9f2c651365426d6a3caec76ba537b42dbc1 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25f62bc40d7ada1032992878696519e515bfe9f2 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9696e19fcb9d238dadea69c807d66bc8b18ebf3 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fc22e5fb104308ab032b921b41a6bbbe7429cb4 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1e3f063015514b2e47745be6977a07e67475bc1 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0851e64d360ba5d17d328dcbf228e92d5e1dc306 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/243f0a394df612342146b23c70dcab33f31c1d24 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2209845634d2f0c5a1531cf4a259edfe04409633 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9fa211a6540003c246f5e21da5f1506021e0ba8c | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0ae2ecbd536714a38d60407085d28c2b4f16fb6 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8997c4b28c37f81d6c88f1ef7d71af6e1621e94f | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b35b50e5d333e926122b42affc57ada1f444ce53 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e5c04cd297638fce8d0c8c23f28f6e204f096e | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cfa28ba84a15f414799c14e0a885cb1eeb03bb2e | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9617020b9699f196d5bba18b195fef6978a30220 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97d2f1349e8e9575c1c71c9b6932960fb88d88a6 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b9252a98271edc5aeb33d8f0fb6f780f40bfff1 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72280c51159770f90830d9c0ed5816dd6a35c386 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a327039176014894f7eb5dfd3788750b3fe7c502 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc418cdd590dd65dbeb201acd9f71cc0fcd24c5f | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdeea5facf85e2c5923760599aa64233ef9eaf70 | > arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61629cabf7625216807d74b7bf514dc6a0d47baa | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d544107673411caf20dd11e43126d2ac07a322b0 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d2166a12faee9992cb28207b03660d614a49bf6 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216b43be158a798ec5b42c7c0a0ebfd29a0c384a | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e7bd38d61b830b8e213e399e28175dd00c5d3a6 | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f6a5f97f1001706eb7062f2fd57a3e57a6ba57 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d11cbb2353d750e1b864d02b74df278382edb64 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e73d84ade8030478428277c4b97aecfc2522fa8 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca018cdc7e4523788ac0aa01233c09543ebde770 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b215925e91813db68fa600bf1d6896e55b02dbf | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd82425aa0f9b0e25cf4425e08401a905311e8fa | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5406b5d32a64ee82a4db1e884553e08727dd98a0 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4930f9145d6f393ac9bead727aaa9bf2a8d167d | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ccf0903e529fd2820f00376ae136c60cf4ca523 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6f8f7cd96ce9cf39e344deb178dee02d062f0ca4 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3db806c0cf126018292d3d83d81410cee6379f59 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45bbe47d649018f8f156ae46d2092c4c090072a4 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/253c6b5bb66f54d5707f9a39ec3ca589d27aaab1 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3760520241b05c858c6a31c7bfc08d6f700eec4 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28897f3ada83ec56b8780a5b3fcb158968421075 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62e35a296840d2ddba7fdcabb16672b0d823e458 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/990f379b53c1166e158db161b7b13104378104b1 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0357b9f08e50108cb61b9189df77e649ba0c846d | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dcdb2193cb5aa9cb7ba8edce0e3b1fd2de32eec | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/875e7b7b234f232d02188582db5566722b7be80a | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c690cfb07c2ef73880b558524d4a9280869eab26 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49ad59c3202f95607e0621ed8d88d4ce212a207c | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10e1aa871ced8acc2075b2df25d4f5f6a2d10156 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75fd8a9234691dd1d44bbfa0042313f1b68b8936 | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/89ac8837710a4df60c222509fb423f4458efba54 | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e6bfd5ec65df0286efe0c89dc703431b558bfae | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbd98e2fe401c1337fd9c0754b7dabdd220d36c1 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0c775a5a6ffbfe083974d2d3a31b8bafe2868af | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86545991d4f7d82948e21c5873b10704c3012a20 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b99875abadc907ba1d41991a423549627304a2fe | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec93abd1ef29c281ccc75e177be6740134359708 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33ac614be44a5f65bd7b9f879104991dd3e5544f | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4849fa1599c1ab0fa3886c0a4af57708ff4fa081 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8508fd20d6119c62a6bb8cdf24a927e63d31629 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c305439077dd6aa173b5ceb7b6286112284b825e | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cbfc701cd352f1e8c98d92575d38f4307259f44a | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd335c2c6e7bf83de0ad36896189be0738b45a13 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10be76c03ceafd9413395ef5f82ab1828788df5a | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7c14e01ac5dba53ca4599549547a07b63806fe3 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eee1f579ee3f28c54c10c20d5f7b5818a391fba9 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344c0c2fd584c7c1a2a0a14eaf443d2e7d2289af | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f553f2232214162253c5895e56dae90f30767c4 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc54dbe6567c1a723babffa7a19f4a62edb8a28 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4333ec208784c95d2006ddf58d67395d0f357b03 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe9b5b424506bc24b47add6c8b6a9f4297c9f5f7 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/180a9eac416b5f7042c62e6c69aaebb356895a07 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b8b8f7de679bc5f38472a43bdd6ea2e2360e63a | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d2395eee36661fc62d46d98404469feaaca0b2b | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f33acbbdf0661e4e559a2e4f8d89ed7f4234d473 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e92cb0a382e6152ea0fb259031c9855061da07f4 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58bb073af3dd7d00dd379139b4f76d9904c3ca8 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d47d8caaea168256e17c104acbbaa33da0932331 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48ee582a4fb7b6a4cd5fa66460c689d2aa25c23b | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a36467004d2b4795851ccb306f28a3f532c3039f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7b9c8c6f2c250a892468c03be626336b635e52bf | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c64cf6c663371a28b6b11596ed6603ad870fa387 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63e7b35aef8f9d982a5c64d384582655cc9773fb | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d457f6bef1d38038a30a034416f40a68a18c695e | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016bc1e129b882999032e88b738dd93a3b29af8c | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09d96d593a6d19b751c89dc150e98f41bda0dbf7 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc78641f5f48c6b4924102ff65863a98f8f0a75a | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6c247bc4b76e28067e215f2aa79be3fa805db6 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a454eda7bcec41f6f3622b9a0abc30c7130daff | > x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec9680834ee7249d7d67f195d7fb6907b8576a31 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f6fc663bb77eec235d82269591bf8f22ba681011 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8433a6dd64879a71d995099674da505fe5db5a5f | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/026144a41cc5311b462465d3fe7f89a797206ef5 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2697b36c09706721c3e8d2fa3da87177c50b64a | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd4d671d859f1f342c9baaabd998a384471b29aa | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7639c854910f1c93b65d1eaeb73860daae29d1 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5f0dc13b581916b7c8170324e61a38994ac4bc | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb53571923f4c519b0a55166d626468a03d1f368 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/770d7b4de2eceefd95da021ae216fe09aee75c92 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/808a818ad85830e76846db03c5bedd7e726921b9 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d7a2d30030198d9d78482fd6542d0bd6146b22e | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffb78b9a703d40f6d10ffeee5a8dfae55607200a | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/884df5432d1b1d06eb3f9be1b0450a169d94c6af | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/459d0fbe4dabcbf94e321e3c28c3969d4f4d7769 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b3d7c46fdf2b2809be1a2bb622ac374d84b5938 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b43193f19fe9d155f60edf3aac8ae269cf7d3fbb | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/75c6c863c607ac4590f760ec7f98e15bc11184cb | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bed79811171c010dc2994550cb0405f6f92e2ead | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2b1f509a2c2dd6ced12f81a46e1c2bead590e24 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/032166dc4714176a69fe15b63155fa42b1dbff34 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58e92c248e7bb244b4328b7b82452066ca12f62c | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e5b04a4214f7ac3603b293cf0c0a04abf426b5d | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1f81af6151a2049217a088be007c28457df4733 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9847d269914997664cba94a4c636cac44fb3a7e6 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ceede7520e8df238c9c34a8243afcce4120971cf | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee725f47ba28f49fbab234c7d6227d00159b32a1 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b903e5647accb5432c0a494107698c10c9e62f28 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f75b58b0a2e40e8c47c6e21355173b4930291d57 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d4eea76d6ffd50e3f7f38e91b85e7c1fc449304 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/41d076a6fad75a9d698ba334af1e8feb3899a9c6 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00ca61886ee747878071aed7fe6a55200bae382e | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0c09d6aa6b5c594f264d35f0565441555916061 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14e66b7039afa6229f4af7da10fcbb4f9e4a954f | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ced681a6e4ddd0a7720926241aa8906cabeb0616 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e518a42495d23caf8af81461dd51915a8a26d1 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e609064e0cef578ea9571ec64861e1c2fc28d8e | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0445b79cf03d39a85251cbd152656f1a9baafc8 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43970fc116801205e40f1fccace2651689baf222 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/882984b7dac01d31179bd5af3365a16ea3486101 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31c55f997dab1c58caf32729b2c97ff19bdf2f5b | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5117b26637e191f7ba23dd8d9c01e6732ec937c | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/049c92068485afc0c7d248a798931f52e6e401a8 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/769f694603c1cf80dcb6b1302624982a8c1adf0e | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/888d2bab0c2e352f04ee76e7f12f4632ca07cb1f | > sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdff0db6c799e5b079e6414d86dd95b767442176 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da2830c648efb5fd6e3871c5be4a1a72d90008e5 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8716d1e50c828494ec37e6a2ad0a038fda2cbb48 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb5ca785b41c04f0d210d51f36b587db867bdc71 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ef65ff32b03c12a80c3abe4559afe354ca0b070 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9b789130b3bccf2d95b7131ebdba0c30a6ed6a9 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4a198d9ec80370fbe1f64d079942166fee04708 | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9f7f177b633a021cf7d3054f3f6f5bead0a0ce43 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/157af5e6b5ae30f1f5d1e1302d3e3932968e1321 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3feb51541fb82204300fbe4971ed08757d54866e | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d0483b954f75c4212149101fef44ca0a4148351 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95aab551f66289e146c034f878145bc4b83fdfc6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6d73c08783b507e3934363782b8d17bcbd17246d | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/675857450f360a598570b1485c944ae1e5acb5dc | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e30934fa0bc715641967c0d799eb2a5b09e67ec | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dafde5108a995e51f9d4fb735599a5f46803db27 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/558e564f0716183d79140f0fc35075f4b422923b | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0f7194bc7d23fc87d49e7108ee130471a3a737d7 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61c3a8cd16b83af35d0e06fbb339c116614ad888 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4d336a1b1847ee9188c2f8d1871f7e130baa4e6 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a45ec466ee0217b92b6d2d32ad64584683b0630 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f121fdc4ad9f4c1e192eec23cd385a7dee0cce | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa3704162680d5f2fdc1130027f0935d0c6a983d | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e07e52aad6282c35a38add0a1cb9009b4d634abe | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/714f7a6eb03169893f4bf6adda8ef80f6b493868 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f901a2098a63a0e3a7e580c963f219637d2db680 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a92243bf390f9beb2e23a8408971313e039a0cf | > i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c77abf4034eb74e99e0e7ba8fe86e3fc797aadd | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4e19e5f83e4cd990ca49dc0e5b5675f34414c5 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31f6c9ed0070a156050af4e7bae6997378ca5132 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07751664b5050850e248a1519c91b4d443dcca2a | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827680dbadaac87c79d4144b7e3ed886cf46da44 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69a44d30ac31f8ec2862d1da45d0b3efd6f79042 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39525562eecc21bb1da2ec0aa596cd52207d66a5 | > arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c33315d339a7e97e86d7384df6c4478d4b4426c | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed521f1aad450c0b85cdabf51f4ec3e52738981f | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad30eed7f49d40cea72987db017a09258fe1f0 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa305b931f8800253625a24461a9459764bff625 | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b313d509ae32a8920f7dbbd69110d1811d9d2bc | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecae3edcc38b4d2465d71234eb067d27eb90b7b6 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/070f992e4adaa7f6e65c6cd3498137616f9ce398 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/044a809a02b8168ba379e0b658894003d7f524ac | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/890d413e7b788725e72a8bfbdb020f76410d05d1 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba4b4fe4945c7dbb3d174897d73c9036d40011d6 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e11e849f245a968825dc755989ecea621f4c0df | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c8ea6f531626f9fef4a56fb88626900edd69070 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea928938fc6c43aa16a86b41dd7c7026a8313f45 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c88c32c98a2d839eccbe05fc509e31f0e7295e19 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e90e9e7612fc5964737a39dcfa3133ba3ad2a70 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad1b4736eb8f6d23b094534100a65b3f16242953 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478b24fd23d07f835fd70f199dadd7cbd15aac00 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/000979ccc0f49698558facf6d771bdef3f07a32f | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86e2e58b20f60476e5f37a35d3e5be1b426b643 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9550f5080c0bae5d4dc2f2aa41aa716748bf5e41 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85a45a1026d97c9ab54ca4fefc6effb3ebbbbb07 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b0b6257786142166a8837fdac3660c63b506395 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de125da38e98d14e68ae60e05addcac2e073971c | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e41bbb45e47515e730439088e773202dc17d322 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a3a0d1ab972bb4adbba53d043267888012d829a | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5580aa0fab057a92144b7ca6b22efe4d808e2536 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25c231d153641761b25aeb85200c0d184dbb64cb | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef2083b4dcc07b1584b65f825130b1b4c722069f | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8977b2abd8aa97143f5da28a3565f16af0043c6f | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df6433ed6c9a856dec041b11b90db0c237b2b0cd | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/150aabc1234a501ef9840f4c18f5ebc61885ba77 | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d0f143af5b865adaf60260ed21f799ad3139dee | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4e815076f74fd69b1db896bd670e269ad64d7ec | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2658fd9e7e6d359cbd5fa9f3c40496ff4bc7be7 | > mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/be8c682951058e53a2826e338818832978d645a9 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0905bfac7d59a07c9196a990114d20f657d547bb | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cef718e3b6eb91a22c78c0acb9646ffc7812c36 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fb207fb56d53c0719ee2016482eee1aa17d4beb | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01acde1187f04be43d0f328f1d4c4bc670d3afac | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/306c87695db5dc7c3d99851992ec6c56f4094938 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db654ed3d59e36ca82b21372ac6da1aa8afc4b1b | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/791b9a3367973bc8cf1cc059704710cbd2bf7495 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a69d9c406159f4b4ad083233963ceb24c30a28c | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bb42d2c661dd11ae04b8484f50f20deda00da41a | > mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e374d405a76fca8534c62c9214116ac6279feb6 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82b87c55f1b8c8df513b88de60915f319f5fd837 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/45dabf7f9510d2cea58c4bb45a9c0625c054f003 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1806f7367e1fb1a0bd6b808802aabcca60b14229 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d6f36f0e9c2925d31c75b61ea4bb16a7bc6cc5e | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d388416f8a02c02ee3328801feb154b9a234b123 | > mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d30bcaf6aa45faed866aa6cb3c4d25082d303d2 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5d4af272395720bf08eef90b314676c378cc1ae | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8561ad167e708ebb61648c6dbd311682f1f457a4 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe1df7b41183eb76c1a38625582063c96c8b6428 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb7f3f978e2bd08bcc64b7369ef9d5d6f88be16a | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7ca3d0897a99842dc46b58421b5de2653da902b | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cecdaa9328caa22fa8dec1c8921503ca2b759c9 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6497e333090c48555d60f0a14c59fd9ba3190dce | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9227e1c5f45ff53568c02aa17a924bc88e50cd7 | > s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce814cac8e6a203c6e05982f854bc97162a5dd14 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8690bc4baccce8ed6ff5ebe842dc469aac331ba | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/777dad3e3fbbfae93157211293554ee197ef2839 | > powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a0a5a1c4be8dc4368c4e57d437587be361fe55f8 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d42345fcfd6199cfe2ed76e14497fa7756bbb44f | > sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ff47e341aca679752ced8e9d643f57c9b92c21d3 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a72ad4af3ade0a5e72d711ddbf985ccbf5c4d02 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ecb835113576e2794e325b6797c13fcac4e234d | > sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c44408801a75967c190372a8847a92198fd2de1 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71b63b7a8a1da178c39875fa93c7f06ac0ab0bb | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/598f356442d08d7c00a4acd24e68db0b673883e4 | > riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/502eeca97ab6c488e945317a13dc9589ae61f9f5 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0c4bda25d3fd6bec0d4c5f88d03a461885f7f89 | > aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/490e14ecdcf2d78ab6451d9183a13de2879e31fe | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27cd6ff074cc441db880d2bdc1332a564bd71fc8 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c53c48337f4e38e8beea0eff924fb45b3e75cd19 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97e8c9b49b3f76d9949aaac9fda6eec915f61801 | > microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79dec87fc8d6129679b2c96eb4fa503c7aeeb42f | > sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf7f0dd0f6edc6f976a439637c863582f87bfe7b | > sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f28baba18fa9c4307c9e864a22a913bbc11ac840 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22f12084e6d631d3786a99e7e098f608502c2307 | > riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ca20ca94a7aea072b283e85cb313d9de86f1ea2 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b81f44065baf9f52d3502767bf1cca97f3907861 | > armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9505b3633819fc03924ea82a6fadbd23d8b5095 | > nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6f898e4cee21a4033557e562a553286c8bae791 | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4ecf06d27ebb1f17076204649d176aff2a7f5e6 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b609e4f8922abe5adef2898b48ceb72629d0c021 | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/22ccfb7dccae7e74c9ae79e54ba35ef1666352f6 | > or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8552d71670019ba7490da0ccfe793f476e6e137 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23716cf9f9c0d7b569237f6d245fbfd0ec033a21 | > microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38ce1bf94b51f6fda0423d175fe591166e606b8c | > powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0e0fd407e7045e396cd2cdf13d05c27dc39658f | > powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5eee1b3d8454bf051090afb94df0923938afe287 | > mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fe42fc166006b2f4d12430b27f6bfdd223ed305 | > sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95ff358906ade7aff787d9db6f4e701e09763457 | > aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d41946f2997e7e81032dc9c8f74fd7ce4e9b4b0 | > arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd59fe8f9a9a7f6a19abe0863dd380a3bcee70d5 | > aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/748303e81411ce4dcc7ef9b42ed8c76f346494fe | > arc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/d6a0bc684f72414b62cb0cf40c2cb8598b47ebb2 | > sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/7dc350d1c2f1857d27be59183b8bf37177f88dd6 | > microblazeel | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/0ee89d616333ceeda4f82c262c57ddcf6b0bc8c0 | > powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/388a2cc92398a09a6b720dba89fe9c394cef8023 | > microblazeel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c7d6dffe47e0cd162492db9b7564b303f8949f50 | > nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/dd62aa0dda0be9bfd846de98df99d8fefdb75e7f | > mipsel | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8d8410044fef08b253c92716c7f0bf0058fd380c | > arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bcc5369e90f371550ecf823acddc3dce1604616d | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0a72c5e5b2de0278f697de2e665a6c7a0a4523f9 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bd70f21e42ff392d3b7e0f7a4b803c9b8cf2ec33 | > sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3733d0ed2a2f424fdb28550c11dc010022d845a1 | > aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f188862d6c9c118bd0561902a217179c2d559744 | > or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6d9b67a6f3b0317db346ba6cd2879c8f4fd72853 | > arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1ad6890cebeea960e7477f7ea22974a4704270b5 | > powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2d6cf40e8bfaeb8d394ade22fb5a48689419a208 | > powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/56c021dd6259d89b8dd0e3fcb51e8a091dbc8447 | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1fb290058831b2db96375c738b935f83f5d65b0b | > armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e23c72590aefc67aefa317f840e2f9d4ede025bd | > microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/486188cba4946c091f8af46f2acf0ad57c852fe2 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f34336f467aaa7a0e660e5f513b8fa563eb7437e | > x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f6321d542aa92d4485d715ba2fb5c4b5c2874d89 | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d5ce458e8757364d779539ea7389ab47b967b913 | > mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7458482d1f6c8e6bb870d9e0ebaa16fc18fdaf60 | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2a0c42592fca2dc183ec4285cc55eb5726a08057 | > powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cdd651addad4b7ca4a27be3d3a2fb1aadc845008 | > mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/172d8471e1da235d5ca30994319fb39fb356ffe3 | > s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/21cff6b9fb25ddbeed4629758697ef4be9ad97bf | > mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea370641200774482e29558fe5f63e3dc979091e | > microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b017d50007c7503eb7e1faed639a226ec27f1aa5 | > s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b989f6ae80ddcf75940d468af1dfbe40cc55e310 | > mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4316df7c08f041bcb736f017af05441f5a4f5106 | > arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/fac2d1e88c1f8a5078281233c80f03caa294e9e5 | > armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/5c2b113b82394b670e018d32a4c115fe82aea319 | > i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b946c368514012026ed82ce10e1d2c86a576a1dd | > arm | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f6067a50340b7ced67cdb67de9125c8a4e20bfd2 | > microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc425437fd4c832ab30a37b2b42a297ca01ac219 | > sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9eb9521c037cc5034c1eb1a3c6b0a45f7257b83 | > or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a34c1636d93198a38209a87d026f992abc60d05b | > aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b7ee5e650269fe32c9b6eee2bcc43bf70f03fdd | > s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/50a2f9c10e3e25f84c2c46fec9436553369c39a1 | > aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b2d5978befa17d782267407ee699387204dbdaf | > arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d7e834f031eb30389a8984ada51f91b84635b043 | > arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/676a4a02be934202b3928bf1671c5d131ed1da04 | > or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7b0f4c776b4d9eae0913d404c0eeec874fdb1701 | > mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/632cbdde3987e23d5665fdc1c8dfb06a5eb74474 | > armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1731e7da6dab2932efb0daba345f3e7e140980bc | > arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b826d612a32280256c5998275f31287de2fdf87a | > riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b833b5200dff6377ccde9fecb87cffb9f371a9c0 | > x86_64 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/fb73187885a1cbda134ad4e6e7dab434d2b797a0 | > i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08172ba68beee0c92e93149910f6c90bd552fe37 | > x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d90f695b2ecef59f6829e5ad0cf0978f8c86b33 | > s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1bba6be441eb028bbc2b997b5caf52b13b1e582 | > x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a63ce609ecc0d0812cbf2e3126fb3aeb3c30506 | > i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1e3c89f8c5b23c9600f3695c4287783f0d0949f | > i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/fd7503469bb31b03dfe24f9c117d03969d8e7475 | > arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/096e12e3247538ce451cc933494de27a66bc3989 | > x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9f64f9495878521f957769de4626bbd60f955e1e | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/4e1100dcbecf3b1cb1e55a5433deb7387dca1264 | > x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/093a7d7a619f53c0bc7c9dac0bd3fecccd513559 | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d48c50d5ea0ab438840724982e58f50ce4abb83c | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/81903f96e5f480b742587bd7426f028d37f13819 | > i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/e08feceabc2795819d666596de0bce1e11aa64b7 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a5c51d014cdc6178371cdffab2d962bdfea85064 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6e2b88661bf06ccc907113bba2adc32c19e71b4c | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a2562f5fa404e6a2970c57458eace161f775010b | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aabd863c02f16e5b7255856c4649cd2033fb77c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f1e3d34926d4ecbfd5a972d193e50cefbff44d7 | > i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d377427b65236cd08a7e86efead21dc0510cfabf | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ca13f99e08e4c2903e29371e550356b443e84f8 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaa2b845b252ad746d28c22c326b70723568df31 | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9c27f2146e4adee4fd1d8a18402e8dce47742e1e | > powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/76f66889efc8f88728d060d949293b18fde16e3d | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a6b475a351da1de294958d9da5f65f13430b541c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef94c214e5e78f43ad1b68d7743ce3fd9d8c1c85 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c186cadf6d7590c38ad581e317523368b8687e25 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed928c3ece5c03d912871ec83ec2d7619b2b995 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/25b9da3e15e3cf076376f297d266dcb0fbb60c95 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/35b73bfbea83de50f87abeb9dc650252b8568e33 | > powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/dc9c8df47ec2d772d48319fd105281578e3d5356 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/13801a386bffad30948a822dfb7699f29ccb3e75 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ad18af624123050ec81be35e18378d6e9419a9ba | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/8c4ee5d40cd2cf5b842d630a278402dbc1ed8ffb | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc0f9741aebc71446c969a94bb59d31bd8d2917d | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9bb4ea4fbc658153329aebfd9e3eb458f84b1f13 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d680b706839365738d04b6bd2347f68b6a2d5561 | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/42a27598d9269c97a332988d86a90eddb70c3904 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e1eb8a2c09992f7c2fc2462fae78cb4603fa7b0c | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9ea243d4ff5f8bc329fde80c10ef3aedf2f4746e | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2c11b6afe3ab2613d384480652d64f11e513ff44 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95cd84fae3d2c0e8b843cee38d0c816e7b9c620f | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0459a388204c3740499bdca526136c4ee2a0272b | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ce8ab4721766b1b304449e77fac273019daf1368 | > x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b2aac6306692bdc81736ff181c3b82b51d22741b | > i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b379a3db0367552b8e3a48edb66cc18ebd3a87b5 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/163fccbd172ea444d949603f932e343a65e3fdb1 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/64960f055177b1758581a84bbe1a16b3d0ae3c44 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/ea30a9e1a82916667ff5ed36bfad749d8f899db9 | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/1e17607b4d7b87130147380b9871f208c3022d71 | > i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f122e4d4d22b8baaec09ed80e869b7a4310d37d | > x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/4a043f2ffeb3a73270f1d01e0d1ba4f0cfde167f | > arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/e7055723d25ed69dd99e925a89245a1b813d1278 | ORPH > mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e05f664a29362616f9627dd68546761697072cfa | > powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/382003ef07a97aeb0bb7d7ef121a75d4d2c2cec5 | > mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ab3057ed2e04810f7dd39fc7bd93ab394c81e2 | > x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d8f16746519e9cd8d7f78ee1ae349d708cfb7ca7 | > sh4eb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8b04e4bb08458f011581e5b8bd762d82dfa2502e | > mips | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/9e4cfcf9bc9060dc75928ef3d05b0618763bd9f6 | > aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6b11a0c296b322478379b6429ee8cec11365278e | > mipsel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/465ad5639207eea66d34d54c9e784107ebfa15ef | > sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/cf1f26cbcda0cc4eb77841be2bd2c6e5e457411b | > microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/313106b9deabb7e022452611c1668a037f19d1ed | > aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f91d910fd96a904c319dfd10001bdba4df7786e1 | > mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/003b1d284a677cb048909eeee840065b3f5a87da | > mips64el | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29dbc9b703e4d260676a7d0133a8ee0055dc2279 | > arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7d1e0b1c31d04d195b96259c0f00ca3baa9211f0 | > mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fa37ef3155d81a4e0143354fcb977fd3517e409b | > m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/64cba89d4b9653330204e3ad62457a8ef255204b | > powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/717da370cbf802e64500834c98c40a963823198e | > sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/960d3ab3b9fd6dd5f296290c96e7e1a4e1237031 | > mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b74a446feb70cd317e3436adf27c081c8c01baca | > microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3661325262b9ef47c6987d6a157b9411c46be73d | > mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd4604b79cdc41c25275fd69308ad3d5a65d5ae5 | > arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e8e4a30dc307b4e39f1eccf6eacd53d499384ba | > powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/365bc57a3c005e9ef95941bdbee536c90351037c | > arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1c54ba9526ecf692c0b4211d1333e38b0be0235e | > arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3f9a2e51c3490d2af17a45382e7a0b2700078b7 | > x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/347c2ead3bc4c65bace3d24a78be0418ee9c6fc4 | > arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/11d5768ee6ed410a52eeb31109d6c951bca75e24 | > xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/790c56ba756f7b2727dc42cbefdc4ce1ad73aff7 | > aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/70b8d82e70a7189a371b61c2e5b004a3eb90bc3b | > arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/634cdfe13c3732cd50fdbf6da77e64f42eeb3d80 | > sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/0d0bc6318ba9bc7effabdb7297f3e8023b3d3806 | ORPH > sh4eb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/539f930a2b118b6ebd278b1012b39b8efaacffed | > arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc116876aef07804bfa0d080cc834ecf605de191 | > riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f2e80095a7897cbc77fcf4158744dfcd58a0f40a | > riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/d2d9b9f2d5f54bf6c8efc472c1ecf5528248a3a4 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/bd2985ff1abd7c2e87901eb3ae48a3cd55a753e6 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/49d337e820aec5753b8354ddc311ad36679140fb | > arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9b4fc62db244d5e5717b3c0ceb5f08dd65a43255 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ec2d5cc354c78d44b3d54258a38f73cbe23342e3 | > arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/cd5b18af08d3904c48b70c27978cb14fc0cfb457 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/578a8ec0c70d9bfa6e55ab30bac97ef9e9b47483 | > arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/3f4ce666e21572b9be30b274db062488f9598d21 | > aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2507575c2748dc37bf93f050e6538cd10b8ac8a5 | ORPH > aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5037854bcbc6bb911746497fc425a9fd60413da3 | ORPH > sh4 | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/84ae0e835458b620061480a1cee6d7073662fd3e | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3d6268c1f192b1c77032a668083f59e05f8913d0 | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/82f93f6c46d80ae83f3b6b8c8d619f66287a7db6 | > or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27165bbd6f26db75f81bf8bb503acb49b8886c91 | > mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d81739b9a6dcbfab1a6b8d9ca53cf1b01e9804fe | > sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/5cf6ec0a439e24a6233243571b5e5be8ffe78725 | > powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d81e1a753bd5f58ca5bc13e4e98494bf60f08ba3 | > powerpc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/79b4abda6f11028dfdc98aa75ccf45cf0f2dbc16 | ORPH > arc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/ced239a117dde440a860a810bb41711cbe0f6aec | ORPH > mips64el | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/48627c5f6c60270c397e475147c492575ea2a355 | ORPH > m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/6ab211eda5c44f8874d5dcf870dc3aa84d7f3522 | ORPH > powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/92c5bcd037e2db08f4235efe32b81ca19f1f717a | ORPH > mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/91bd438628c90501ae09620a11e94023f2b310d3 | ORPH > arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/2cc4bf8840065d44d17cb5d839b3755002ac53e3 | ORPH > arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/82ae6de2b3bc229842f6e0a2998c898e089220fb | > sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/66df85003589bcd46a02114796b1e2379df3ff18 | ORPH > aarch64_be | micropython-1.19 | NOK | http://autobuild.buildroot.net/results/268774989beaca5743def80ce537e78d541bfcda | > riscv32 | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 | > sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d5393ebd89661d828e4b49419dc3243fea942dd1 | ORPH > sparc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/5e73f06d67648d4509f360f9d554d7c8a8a9c06c | ORPH > arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/98792a0d9c7bdee7cf69496a72c0755163ea672d | ORPH > powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/4a463c951a104bad8713300fd194241e7ab0400c | > xtensa | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/b39191876e8ea0871c811e3124c02f2c8fa93d50 | > microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/485de47b0b5705fd536e41ef39cac1ea0cc580c5 | > sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4f8b3e84866682b55de9158da0fee181f8f7bd8e | ORPH > xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4cd768ae7816f0f013a52b5e767b51bd96128953 | ORPH > arc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/39bd45498d0f77ace2051e7e8efd31dded8483df | ORPH > x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cf1eeccf63591e723967dbc559fa803b24087520 | > m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2bc4a5cce9ff3c648a2869639cc9bc1ac4bedfd0 | > or1k | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/ec4ea4cd308ec0c7b255f82139d98dc8881b04b0 | > powerpc64le | pimd-2.3.2 | NOK | http://autobuild.buildroot.net/results/3718e26cfdeccd5944ad597317410670b9d06906 | > m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/70fa54bfd4f3fed1c81f975b1ba096f9801f2841 | ORPH > m68k | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/16cf60497350567e6ee572351ad7873420b5dfb5 | ORPH > riscv32 | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/01802ca182687fb2bb543872780672fe64dc93dd | > sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/d72a9529429e83f69d8c7764865b989216f82b74 | ORPH > microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/8a904d8a2fe4dfd2c5ed05a56d6b02a287b0a0ca | > arc | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/f605a8f96e0ed6a012334fd1bc670be66f7c5ce3 | > arc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/56a699cb30d8e5e289458941fa31cc005b0a2a71 | > or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c813606c590d73d2129a8b646e4b939bd9dd9660 | > arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/134087dbff1b34db48ab750143b525d9a0383eee | ORPH > powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d17d696d92876910d10785bbc10ead714d9800e0 | ORPH > or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9b4a6d7473f9e66d93451cdc957ed9d21a759dd7 | ORPH > xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3dc8eb0cbf842b57acac32a6903db67d19be7f41 | ORPH > xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/4ae8c2b6fb85ede0441f26060b41e2e165c9c229 | ORPH > mips64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/32d32af179bb65d5b1e6a0ffe10b424766201147 | ORPH > armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8f497a06ce2f0490a0392ecc61241f16f8ca25b2 | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6aaf002b7ae46f34bdbef2ac270abc3498c54164 | ORPH > arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/59febc8843f821d9ef05ebb9d0d73d8a8fd47f7f | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8fca67980583f55333c451b2649141c5501cb7dd | ORPH > mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/88c9fa4a638eb68b3532b60fac8a8131da0a417f | ORPH > sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/022c5748bf45d8d0b7bb3989b10582cc466f5af5 | ORPH > aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a665c3ffc25ed125bc3ce945a66ba0ce89a87290 | > mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/7a258b4c8833bbd824d51bf3142ca93413677b53 | ORPH > nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bd26fdf3163cc517c5e1b577a69d236eb21509ec | ORPH > armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44004a01a7f51b923ad43aa4dafbfc0ab2403e67 | ORPH > sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9e75c0a861c1573213f02f32a151772e60cf88db | ORPH > or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1ef855350a6fee35517e945efdda30746da690 | ORPH > sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/76047421e7d9c79b02586b7d045a8e2eb747c9de | > mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/5d67dcb26bebd0b0feedd9b676d005a25a3b7476 | ORPH > mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a3eb12f4658027f54b8d8a725319241cc8252e2c | ORPH > mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/cfbf5165e398749ad8d1fd458aae0f7c69d28a50 | > mips64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b20980176ad32312a9655f9929bc0d720d3591c4 | > powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/47cc493eb1421a4de6dfff7dfb7dfb3f30a0e702 | > powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/d543de55a4fabdf59497b293dee2f6d22084fe85 | > mips64 | uclibc-ng-test-0844445e7358... | NOK | http://autobuild.buildroot.net/results/94c25fcd43176197cc30b2a9a513598fe19da472 | > mipsel | unknown | TIM | http://autobuild.buildroot.net/results/6945d36c9d3cf73a011e8cf6f96153ff8d847f53 | > sparc | unknown | NOK | http://autobuild.buildroot.net/results/09ea50a1ef10edb8a5e6a6890e9945e81b1aff7e | > or1k | wampcc-1.6 | NOK | http://autobuild.buildroot.net/results/83efdd2c0b14d89e6304986cd26716be680723a0 | ORPH > mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c9aabe19e7c3f048f4a11cdffd6a44d24f444c05 | ORPH > mipsel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/281e35a765b87334d51e268a2b9a475ba134de68 | > i686 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/614ccdd145a34245b4709fd123275de7a4469c5d | > arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/886953ea2c98983b9a46660e4975b1837b18804b | ORPH > arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/68c23c82c647e333df9fbdcc762158454cf052ef | ORPH > aarch64_be | znc-1.8.2 | NOK | http://autobuild.buildroot.net/results/5f4569df073779ebf8e975a45db1dc36f20742f5 | > microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/09d720ffc4f204a28f0f8f9bdaaaefebfd15a07e | > > > Classification of failures by reason for 2022.02.x > -------------------------------------------------- > > bat-0.19.0 | 1 > igd2-for-linux-2.1 | 1 > wavemon-0.9.4 | 1 > > > Detail of failures for 2022.02.x > -------------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/cb9acba896fa13752389d12f19cbb66f0a02ecb6 | > arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/30881ec6d4fc9f89085322b48da8e5a0da0073ff | > arm | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/db0ec450302f68c9296df20413199aa67a7f040e | ORPH > > > Classification of failures by reason for 2022.08.x > -------------------------------------------------- > > host-rust-1.62.0 | 3 > dash-0.5.11.5 | 1 > host-gcc-initial-12.1.0 | 1 > host-pahole-73383b3a39afe86... | 1 > memcached-1.6.16 | 1 > open62541-v1.3.2 | 1 > pcsc-lite-1.9.8 | 1 > python-sip-4.19.25 | 1 > toolchain-external-codescap... | 1 > unknown | 1 > xxhash-0.8.1 | 1 > > > Detail of failures for 2022.08.x > -------------------------------- > > arch | reason | OK? | url | orph? > -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- > sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d665ea8ab6268e005771265c2624c4043904db02 | ORPH > x86_64 | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/4348a0689297f08acb892fb2f2a08e8ed5e63498 | > i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/895f6959611517f8d99ee65f7e3ecc4ba7517402 | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a2b720a935fafc7ad1b8489b5eddf167f73e7e62 | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/98ff904509a1ba8b798a528a98ba927a9a377efc | > sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/67ca94f3febfb66f70638878e0d9f5f0c56de08c | > m68k | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ddbd4c53aaa695c29803da1ac139d780bf2819a5 | ORPH > sparc64 | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/c90412a1debbaa80dc57054f30b1768d48e14412 | ORPH > arm | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/bb5e7d4021c58d7a357ce39338ba317ab893f3a9 | ORPH > riscv32 | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/521e5f6becebf76d5319125ae674c11d19c27636 | > mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/891c0be7bb164c0f03ef0b6bf59300293d5ec3de | ORPH > sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/07a9b305257eb99fb60538a74134927d36ad7356 | > powerpc64le | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/475d838916ea743f390f365e13acb87d1a27eefd | ORPH > > > > -- > http://autobuild.buildroot.net > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From giulio.benetti at benettiengineering.com Wed Oct 12 15:38:39 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 17:38:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> References: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Message-ID: Hi S?bastien, On 12/10/22 16:43, S?bastien Szymanski wrote: > Drop first patch, upstreamed: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f > > Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 With this bump my patch becomes useless since my patch has been upstreamed too: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=5086e7c0de4d0094f8674368a88d931b27589d53 and so we can drop it: https://patchwork.ozlabs.org/project/buildroot/patch/20220918163147.1133842-1-giulio.benetti at benettiengineering.com/ But there is an error arising while building with sourcery-arm using $ buildroot/utils/test-pkg -p mmc-utils ``` mmc_cmds.c: In function 'erase': mmc_cmds.c:2633:31: error: invalid application of 'sizeof' to incomplete type 'struct mmc_ioc_multi_c multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + ^ mmc_cmds.c:2640:11: error: dereferencing pointer to incomplete type multi_cmd->num_of_cmds = 3; ^ mmc_cmds.c:2642:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START; ^ mmc_cmds.c:2643:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].arg = start; ^ mmc_cmds.c:2644:11: error: dereferencing pointer to incomplete type multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; ^ ... ``` Have you given a try with that script? Could you please provide a patch to fix that bug too? Or I can provide it later. Thank you Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > > Signed-off-by: S?bastien Szymanski > --- > ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- > package/mmc-utils/mmc-utils.hash | 4 +- > package/mmc-utils/mmc-utils.mk | 2 +- > 3 files changed, 3 insertions(+), 40 deletions(-) > delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > > diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > deleted file mode 100644 > index 7725f9ca5e..0000000000 > --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sat, 28 Sep 2019 20:44:52 +0200 > -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 > - > -Fix following error with gcc 4.9: > - > -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] > - struct rpmb_frame frame_status = {0}; > - > -Fixes: > - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: sent to linux-mmc at vger.kernel.org] > ---- > - mmc_cmds.c | 4 +++- > - 1 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/mmc_cmds.c b/mmc_cmds.c > -index fb37189..6b09f26 100644 > ---- a/mmc_cmds.c > -+++ b/mmc_cmds.c > -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, > - u_int16_t rpmb_type; > - struct mmc_ioc_multi_cmd *mioc; > - struct mmc_ioc_cmd *ioc; > -- struct rpmb_frame frame_status = {0}; > -+ struct rpmb_frame frame_status; > -+ > -+ memset(&frame_status, 0, sizeof(frame_status)); > - > - if (!frame_in || !frame_out || !out_cnt) > - return -EINVAL; > --- > -2.23.0 > - > diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash > index e8b2826612..1256f63487 100644 > --- a/package/mmc-utils/mmc-utils.hash > +++ b/package/mmc-utils/mmc-utils.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz > -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h > +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz > +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c847378692..bf940967ef 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 > +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 > MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git > MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 From peter at korsgaard.com Wed Oct 12 15:41:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:41:25 +0200 Subject: [Buildroot] [PATCH] configs/aspeed_ast2600evb: Set BR2_ARM_FPU_VFPV4D16 In-Reply-To: <20220925132218.3848758-1-clg@kaod.org> (=?utf-8?Q?=22C=C3=A9?= =?utf-8?Q?dric?= Le Goater"'s message of "Sun, 25 Sep 2022 15:22:18 +0200") References: <20220925132218.3848758-1-clg@kaod.org> Message-ID: <87pmexnj6i.fsf@dell.be.48ers.dk> >>>>> "C?dric" == C?dric Le Goater writes: > The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are : > half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm > the vfpv3d16 feature bit is common to both vfpv3 and vfpv4. > Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks > user space). Set BR2_ARM_FPU_VFPV4D16 instead. > Signed-off-by: C?dric Le Goater Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 12 15:40:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:40:21 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] configs/aspeed_ast2600evb: set BR2_ARM_FPU_VFPV4D16 Message-ID: <20221012154141.423B186BE5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=23fbc414296c27f5200d21ce5a9ff53f80e5af0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are : half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm the vfpv3d16 feature bit is common to both vfpv3 and vfpv4. Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks user space). Set BR2_ARM_FPU_VFPV4D16 instead. Signed-off-by: C??dric Le Goater Signed-off-by: Thomas Petazzoni (cherry picked from commit 7ccb318d80f0d09e22f944ac9fc618f9abedbe43) Signed-off-by: Peter Korsgaard --- configs/aspeed_ast2600evb_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/aspeed_ast2600evb_defconfig b/configs/aspeed_ast2600evb_defconfig index cd058ad0ac..04239566c8 100644 --- a/configs/aspeed_ast2600evb_defconfig +++ b/configs/aspeed_ast2600evb_defconfig @@ -1,7 +1,7 @@ # Architecture BR2_arm=y BR2_cortex_a7=y -BR2_ARM_FPU_VFPV4=y +BR2_ARM_FPU_VFPV4D16=y # System BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb" From peter at korsgaard.com Wed Oct 12 15:44:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:44:26 +0200 Subject: [Buildroot] [PATCH] package/collectd: work around gcc bug 68485 In-Reply-To: <20220924230826.283565-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Sun, 25 Sep 2022 01:08:26 +0200") References: <20220924230826.283565-1-giulio.benetti@benettiengineering.com> Message-ID: <87leplnj1h.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > collectd is impacted by the microblaze-specific gcc bug #68485 [0]. > As for all other impacted packages, force no optimisation when using a > toolchain riddled with that bug. > Fixes: > http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ > [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 > Signed-off-by: Giulio Benetti Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 12 15:44:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:44:07 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/collectd: work around gcc bug 68485 Message-ID: <20221012154439.6636A86BF5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aa47ae19ed5c763fb74c1d5787e868756ece6dd8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x collectd is impacted by the microblaze-specific gcc bug #68485 [0]. As for all other impacted packages, force no optimisation when using a toolchain riddled with that bug. Fixes: http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 15f48d57f73da375ed28e582ab68740704b499fd) Signed-off-by: Peter Korsgaard --- package/collectd/collectd.mk | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/package/collectd/collectd.mk b/package/collectd/collectd.mk index 5751757040..5510c265e8 100644 --- a/package/collectd/collectd.mk +++ b/package/collectd/collectd.mk @@ -27,6 +27,14 @@ COLLECTD_PLUGINS_DISABLE = \ COLLECTD_CONF_ENV += LIBS="-lm" +COLLECTD_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y) +COLLECTD_CFLAGS += -O0 +endif + +COLLECTD_CONF_ENV += CFLAGS="$(COLLECTD_CFLAGS)" + # # NOTE: There's also a third availible setting "intswap", which might # be needed on some old ARM hardware (see [2]), but is not being From peter at korsgaard.com Wed Oct 12 15:43:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 12 Oct 2022 17:43:43 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/collectd: work around gcc bug 68485 Message-ID: <20221012154543.95AD086BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c52157f6aabd1cc92026610efa48aae4fe1053dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x collectd is impacted by the microblaze-specific gcc bug #68485 [0]. As for all other impacted packages, force no optimisation when using a toolchain riddled with that bug. Fixes: http://autobuild.buildroot.net/results/6a8/6a87bbe17e6f606a97097800dc484a7b17bffa7d/ [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 15f48d57f73da375ed28e582ab68740704b499fd) Signed-off-by: Peter Korsgaard --- package/collectd/collectd.mk | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/package/collectd/collectd.mk b/package/collectd/collectd.mk index 5751757040..5510c265e8 100644 --- a/package/collectd/collectd.mk +++ b/package/collectd/collectd.mk @@ -27,6 +27,14 @@ COLLECTD_PLUGINS_DISABLE = \ COLLECTD_CONF_ENV += LIBS="-lm" +COLLECTD_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y) +COLLECTD_CFLAGS += -O0 +endif + +COLLECTD_CONF_ENV += CFLAGS="$(COLLECTD_CFLAGS)" + # # NOTE: There's also a third availible setting "intswap", which might # be needed on some old ARM hardware (see [2]), but is not being From giulio.benetti at benettiengineering.com Wed Oct 12 16:00:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 18:00:25 +0200 Subject: [Buildroot] [PATCH] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 Message-ID: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash index ac6587b27a..fd874f1f0a 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 64f15a8c7d383ac92230ef82711507a7f3a309462999f6694863fbbb4f12e0be sunxi-mali-utgard-driver-c4cf7aabed25e0fd27159564caf588a37016870d.tar.gz +sha256 4b66f20272c63ce8ea769bf1c95f9923ed6facabe0c14a8c7644b302b9f23b58 sunxi-mali-utgard-driver-73a80d550f2f181b5fc7fc2d859e15d077d845e4.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk index 594a770e61..15d660e49d 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk @@ -4,7 +4,7 @@ # ################################################################################ -SUNXI_MALI_UTGARD_DRIVER_VERSION = c4cf7aabed25e0fd27159564caf588a37016870d +SUNXI_MALI_UTGARD_DRIVER_VERSION = 73a80d550f2f181b5fc7fc2d859e15d077d845e4 SUNXI_MALI_UTGARD_DRIVER_SITE = $(call github,giuliobenetti,sunxi-mali,$(SUNXI_MALI_UTGARD_DRIVER_VERSION)) SUNXI_MALI_UTGARD_DRIVER_DEPENDENCIES = linux SUNXI_MALI_UTGARD_DRIVER_LICENSE = GPL-2.0 -- 2.34.1 From sebastien.szymanski at armadeus.com Wed Oct 12 16:11:32 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?Q?S=c3=a9bastien_Szymanski?=) Date: Wed, 12 Oct 2022 18:11:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: References: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Message-ID: <0f695802-d4d9-fba5-f87a-e036ff1c6253@armadeus.com> Hi Guilio, On 10/12/22 17:38, Giulio Benetti wrote: > Hi S?bastien, > > On 12/10/22 16:43, S?bastien Szymanski wrote: >> Drop first patch, upstreamed: >> https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f >> >> Fixes: >> http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 > > With this bump my patch becomes useless since my patch has been > upstreamed too: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=5086e7c0de4d0094f8674368a88d931b27589d53 > and so we can drop it: > https://patchwork.ozlabs.org/project/buildroot/patch/20220918163147.1133842-1-giulio.benetti at benettiengineering.com/ > Your patch has never been merged into Buildroot. (Otherwise there would be no build failure ;)) > But there is an error arising while building with sourcery-arm using > $ buildroot/utils/test-pkg -p mmc-utils > ``` > mmc_cmds.c: In function 'erase': > mmc_cmds.c:2633:31: error: invalid application of 'sizeof' to incomplete > type 'struct mmc_ioc_multi_c > ? multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + > ?????????????????????????????? ^ > mmc_cmds.c:2640:11: error: dereferencing pointer to incomplete type > ? multi_cmd->num_of_cmds = 3; > ?????????? ^ > mmc_cmds.c:2642:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START; > ?????????? ^ > mmc_cmds.c:2643:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].arg = start; > ?????????? ^ > mmc_cmds.c:2644:11: error: dereferencing pointer to incomplete type > ? multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; > ?????????? ^ > ... > ``` > > Have you given a try with that script? Could you please provide a patch > to fix that bug too? Or I can provide it later. I did now (and just found a bug in it ;)) The fix is that we need to have mmc-utils depend on the right linux-headers (>= 4.4), isn't it ? Best regards, > > Thank you > > Best regards -- S?bastien Szymanski, Armadeus Systems Software engineer From sebastien.szymanski at armadeus.com Wed Oct 12 16:48:31 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Wed, 12 Oct 2022 18:48:31 +0200 Subject: [Buildroot] [PATCH 1/1] utils/test-pkg: proper output on host without jq installed Message-ID: <20221012164831.10476-1-sebastien.szymanski@armadeus.com> On host without jq installed, test-pkg's output is as following: $ ./utils/test-pkg -p mmc-utils bootlin-armv5-uclibc [1/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) JQ IS OK bootlin-armv7-glibc [2/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) JQ IS OK bootlin-armv7m-uclibc [3/6]: which: no jq in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib/llvm/13/bin:/usr/lib64/opencascade/bin) ... Since test-pkg handles this case we can hide this error message and have proper output: $ ./utils/test-pkg -p mmc-utils bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: OK Signed-off-by: S?bastien Szymanski --- utils/test-pkg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/utils/test-pkg b/utils/test-pkg index 4ebfd9af66..e7f5464817 100755 --- a/utils/test-pkg +++ b/utils/test-pkg @@ -201,7 +201,7 @@ build_one() { # Validate that we generate proper json as show-info { tput smso; printf '>>> Running show-info\n'; tput rmso; } >> "${dir}/logfile" 2> /dev/null; - JQ="$(which jq)" + JQ="$(which jq 2> /dev/null)" if [ -z "${JQ}" ]; then make O="${dir}" host-jq >> "${dir}/logfile" 2>&1 JQ="${dir}/host/bin/jq" -- 2.37.3 From neal.frager at amd.com Wed Oct 12 17:54:26 2022 From: neal.frager at amd.com (Neal Frager) Date: Wed, 12 Oct 2022 11:54:26 -0600 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221012175426.32367-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware It will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch enables a pmufw binary built by petalinux to solve the issue. Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin --- boot/uboot/uboot.mk | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..ab7dedb4b6 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -392,8 +392,17 @@ else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) + +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) +UBOOT_ZYNQMP_PMUFW_CONVERT=y +endif + define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From sebastien.szymanski at armadeus.com Wed Oct 12 14:43:10 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Wed, 12 Oct 2022 16:43:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 Message-ID: <20221012144310.28145-1-sebastien.szymanski@armadeus.com> Drop first patch, upstreamed: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 Signed-off-by: S?bastien Szymanski --- ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- package/mmc-utils/mmc-utils.hash | 4 +- package/mmc-utils/mmc-utils.mk | 2 +- 3 files changed, 3 insertions(+), 40 deletions(-) delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch deleted file mode 100644 index 7725f9ca5e..0000000000 --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 28 Sep 2019 20:44:52 +0200 -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 - -Fix following error with gcc 4.9: - -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] - struct rpmb_frame frame_status = {0}; - -Fixes: - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 - -Signed-off-by: Fabrice Fontaine -[Upstream status: sent to linux-mmc at vger.kernel.org] ---- - mmc_cmds.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/mmc_cmds.c b/mmc_cmds.c -index fb37189..6b09f26 100644 ---- a/mmc_cmds.c -+++ b/mmc_cmds.c -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, - u_int16_t rpmb_type; - struct mmc_ioc_multi_cmd *mioc; - struct mmc_ioc_cmd *ioc; -- struct rpmb_frame frame_status = {0}; -+ struct rpmb_frame frame_status; -+ -+ memset(&frame_status, 0, sizeof(frame_status)); - - if (!frame_in || !frame_out || !out_cnt) - return -EINVAL; --- -2.23.0 - diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash index e8b2826612..1256f63487 100644 --- a/package/mmc-utils/mmc-utils.hash +++ b/package/mmc-utils/mmc-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..bf940967ef 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 -- 2.37.3 From james.hilliard1 at gmail.com Wed Oct 12 18:39:07 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 12 Oct 2022 12:39:07 -0600 Subject: [Buildroot] [PATCH 1/1] package/linux-firmware: bump to version 20221012 Message-ID: <20221012183907.1651460-1-james.hilliard1@gmail.com> Update brcmfmac4356-sdio.vamrs,rock960.txt filename to brcmfmac4356-sdio.AP6356S.txt due to rename: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/brcm?id=4ffcf980a535c1f26aa994ecf64a1b9d1ed6216e Update WHENCE file hash due to date/firmware file updates. Add missing LICENSE.ice_enhanced and LICENCE.moxa hashes. Signed-off-by: James Hilliard --- package/linux-firmware/linux-firmware.hash | 6 ++++-- package/linux-firmware/linux-firmware.mk | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/linux-firmware/linux-firmware.hash b/package/linux-firmware/linux-firmware.hash index 382e9cb2ba..d81223e311 100644 --- a/package/linux-firmware/linux-firmware.hash +++ b/package/linux-firmware/linux-firmware.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/sha256sums.asc -sha256 5938ee717b2023b48f6bfcf344b40ddc947e3e22c0bc36d4c3418f90fea68182 linux-firmware-20220310.tar.xz +sha256 e9d174af729511c8cccb60ec4e0b223b3c44b67d813b42d1ab9813acfa667fa5 linux-firmware-20221012.tar.xz # Hash for license files sha256 8116433f4004fc0c24d72b3d9e497808b724aa0e5e1cd63fc1bf66b715b1e2e9 LICENCE.Abilis @@ -14,9 +14,11 @@ sha256 a5777f9e80aca0603b0648454de996168b1c530322550ccda94d6d78bcf6c061 LICENC sha256 ae0db6cc4db33941148df0f67de53e76a77b1b5a46b3165edb7040aa2750015f LICENCE.cypress sha256 60fbc9cccb455e1a3306c97db942d6f24fa93664be61d54c497637e6d0e2ae83 LICENCE.fw_sst_0f28 sha256 5181b0b51efc79d5acb2c9bb92042878fdbad97a92114d4ab5e32e2b5b52fce4 LICENCE.ibt_firmware +sha256 8c45a83562a69f7ac4207e4cb5c0063af2e545791b3947bc81dc82305481c15c LICENSE.ice_enhanced sha256 0e0c11073ba3c832097da38e0905da36b8a3526f219407977b13b71c6675be7d LICENCE.it913x sha256 16d5040c7cf851fc693b7542e20870935b99802533ea1bfd231c377a2305e5c5 LICENCE.iwlwifi_firmware sha256 0fc67bd715b3395f3f2af464781910e9e69c4ba23da304352229b42dc9e986c3 LICENCE.microchip +sha256 59ae206c89108905ebdc9ad4c9336526bd2c0d50fbf988c21e8c2a82719d42a4 LICENCE.moxa sha256 2051d5bf0755a0668f8c3d9a0d1c41d4b8cc411aba70f720fda71ae9e3b4d25c LICENCE.qat_firmware sha256 4071a11d878dbc0ac6d9e71203d03b151638f9d7a8bc47a54c3cb964100d5822 LICENCE.qla2xxx sha256 d7bec70668ddd4aae8fb4aa32870e54b49fcdb0b9b007aa9f54b53a1ac7461bd LICENCE.ralink-firmware.txt @@ -33,6 +35,6 @@ sha256 8542aeabf2761935122d693561e16766ce1bcc2b0d003204f9040b7d6d929f2e LICENS sha256 be904cd28cb292b80cdb6cf412ab0d9159d431671e987ad433c1f62e0988a9bc LICENSE.qcom sha256 fc6223d4bfe9f2f9e2eddc44b9fe5721d0caf49f01cb08d602906add686d8c6f LICENSE.radeon sha256 2bdd2e716f05d9737d3f9a20f9a3a3c0caee0e866100ddb0673f1178e42f92b9 LICENSE.sdma_firmware -sha256 75afdb5d45a21ff95ff7aa82d67bc42a83830f2def98ea937c01d6e7603d76f9 WHENCE +sha256 6857749e23d6a2853e5d33f6d6012a60d5baa2b4d51b5f8c6799d00d68733841 WHENCE sha256 fa43e1b9a13b341a07adca9dbe73d0f9072d7966fdfe811c01f0dd2872d7309a qcom/NOTICE.txt sha256 bef9c828e84f21e7835b4de7daf954a327e1ff777871b58e116039b684c0d604 LICENCE.e100 diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk index 64d096df14..ea97166d93 100644 --- a/package/linux-firmware/linux-firmware.mk +++ b/package/linux-firmware/linux-firmware.mk @@ -4,7 +4,7 @@ # ################################################################################ -LINUX_FIRMWARE_VERSION = 20220310 +LINUX_FIRMWARE_VERSION = 20221012 LINUX_FIRMWARE_SOURCE = linux-firmware-$(LINUX_FIRMWARE_VERSION).tar.xz LINUX_FIRMWARE_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/firmware LINUX_FIRMWARE_INSTALL_IMAGES = YES @@ -643,7 +643,7 @@ LINUX_FIRMWARE_FILES += \ brcm/brcmfmac4373.bin \ brcm/brcmfmac4330-sdio.Prowise-PT301.txt \ brcm/brcmfmac4356-pcie.gpd-win-pocket.txt \ - brcm/brcmfmac4356-sdio.vamrs,rock960.txt + brcm/brcmfmac4356-sdio.AP6356S.txt LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.broadcom_bcm43xx endif -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 12 19:05:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 21:05:34 +0200 Subject: [Buildroot] [PATCH] package/qt5: bump packages to latest kde submodule versions Message-ID: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> Bump qt5 packages to latest submodule versions from: https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15 Drop a qt5wayland patch which is now upstream. Signed-off-by: Giulio Benetti --- package/qt5/qt5.mk | 2 +- package/qt5/qt5base/qt5base.hash | 2 +- package/qt5/qt5base/qt5base.mk | 2 +- package/qt5/qt5charts/qt5charts.hash | 2 +- package/qt5/qt5charts/qt5charts.mk | 2 +- .../qt5/qt5declarative/qt5declarative.hash | 2 +- package/qt5/qt5declarative/qt5declarative.mk | 2 +- .../qt5graphicaleffects.hash | 2 +- .../qt5graphicaleffects.mk | 2 +- .../qt5/qt5imageformats/qt5imageformats.hash | 2 +- .../qt5/qt5imageformats/qt5imageformats.mk | 2 +- package/qt5/qt5location/qt5location.hash | 2 +- package/qt5/qt5location/qt5location.mk | 2 +- package/qt5/qt5lottie/qt5lottie.hash | 2 +- package/qt5/qt5lottie/qt5lottie.mk | 2 +- package/qt5/qt5multimedia/qt5multimedia.hash | 2 +- package/qt5/qt5multimedia/qt5multimedia.mk | 2 +- .../qt5quickcontrols/qt5quickcontrols.hash | 2 +- .../qt5/qt5quickcontrols/qt5quickcontrols.mk | 2 +- .../qt5quickcontrols2/qt5quickcontrols2.hash | 2 +- .../qt5quickcontrols2/qt5quickcontrols2.mk | 2 +- .../qt5quicktimeline/qt5quicktimeline.hash | 2 +- .../qt5/qt5quicktimeline/qt5quicktimeline.mk | 2 +- .../qt5remoteobjects/qt5remoteobjects.hash | 2 +- .../qt5/qt5remoteobjects/qt5remoteobjects.mk | 2 +- package/qt5/qt5script/qt5script.hash | 2 +- package/qt5/qt5script/qt5script.mk | 2 +- package/qt5/qt5scxml/qt5scxml.hash | 2 +- package/qt5/qt5scxml/qt5scxml.mk | 2 +- package/qt5/qt5sensors/qt5sensors.hash | 2 +- package/qt5/qt5sensors/qt5sensors.mk | 2 +- package/qt5/qt5serialbus/qt5serialbus.hash | 2 +- package/qt5/qt5serialbus/qt5serialbus.mk | 2 +- package/qt5/qt5serialport/qt5serialport.hash | 2 +- package/qt5/qt5serialport/qt5serialport.mk | 2 +- package/qt5/qt5svg/qt5svg.hash | 2 +- package/qt5/qt5svg/qt5svg.mk | 2 +- package/qt5/qt5tools/qt5tools.hash | 2 +- package/qt5/qt5tools/qt5tools.mk | 2 +- .../qt5virtualkeyboard.hash | 2 +- .../qt5virtualkeyboard/qt5virtualkeyboard.mk | 2 +- .../0001-Add-missing-define-guards.patch | 35 ------------------- package/qt5/qt5wayland/qt5wayland.hash | 2 +- package/qt5/qt5wayland/qt5wayland.mk | 2 +- ...ro-don-t-link-statically-with-libstc.patch | 15 ++++---- package/qt5/qt5webengine/qt5webengine.hash | 2 +- package/qt5/qt5webview/qt5webview.mk | 2 +- package/qt5/qt5x11extras/qt5x11extras.mk | 2 +- .../qt5/qt5xmlpatterns/qt5xmlpatterns.hash | 2 +- package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk | 2 +- 50 files changed, 56 insertions(+), 90 deletions(-) delete mode 100644 package/qt5/qt5wayland/0001-Add-missing-define-guards.patch diff --git a/package/qt5/qt5.mk b/package/qt5/qt5.mk index 0706c3548d..b55accacf1 100644 --- a/package/qt5/qt5.mk +++ b/package/qt5/qt5.mk @@ -5,7 +5,7 @@ ################################################################################ QT5_VERSION_MAJOR = 5.15 -QT5_VERSION = $(QT5_VERSION_MAJOR).8 +QT5_VERSION = $(QT5_VERSION_MAJOR).10 QT5_SITE = https://invent.kde.org/qt/qt include $(sort $(wildcard package/qt5/*/*.mk)) diff --git a/package/qt5/qt5base/qt5base.hash b/package/qt5/qt5base/qt5base.hash index 27d2b99c34..4efc8fa172 100644 --- a/package/qt5/qt5base/qt5base.hash +++ b/package/qt5/qt5base/qt5base.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 ecff8cf42af98c2294f7c99eb8c41564892f470382adaf8f4048c85252849808 qtbase-2ffb7ad8a1079a0444b9c72affe3d19b089b60de.tar.bz2 +sha256 5622a9053154af9a353b8e8be217104c6af068b5b5aba8b07ef4fea2dc79fded qtbase-e44097b63d17ba3178a637df7fac51ddc51cb48b.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5base/qt5base.mk b/package/qt5/qt5base/qt5base.mk index efa0e16e9a..028236d2ed 100644 --- a/package/qt5/qt5base/qt5base.mk +++ b/package/qt5/qt5base/qt5base.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5BASE_VERSION = 2ffb7ad8a1079a0444b9c72affe3d19b089b60de +QT5BASE_VERSION = e44097b63d17ba3178a637df7fac51ddc51cb48b QT5BASE_SITE = $(QT5_SITE)/qtbase/-/archive/$(QT5BASE_VERSION) QT5BASE_SOURCE = qtbase-$(QT5BASE_VERSION).tar.bz2 diff --git a/package/qt5/qt5charts/qt5charts.hash b/package/qt5/qt5charts/qt5charts.hash index ba22e29996..0688f64615 100644 --- a/package/qt5/qt5charts/qt5charts.hash +++ b/package/qt5/qt5charts/qt5charts.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 32119f7ac88c250b24835b91a71510bf673f1cede6e572fd1059debf8325d7ff qtcharts-16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5.tar.bz2 +sha256 9d2ad94a054bd7df08e5d11bc77b6422ccecbf99ea8dd6f06908bafc72ea869d qtcharts-841083c263f16f8acb81e4915bf24bbed0461c9a.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5charts/qt5charts.mk b/package/qt5/qt5charts/qt5charts.mk index 0028c9f8cb..fa69263be4 100644 --- a/package/qt5/qt5charts/qt5charts.mk +++ b/package/qt5/qt5charts/qt5charts.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5CHARTS_VERSION = 16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5 +QT5CHARTS_VERSION = 841083c263f16f8acb81e4915bf24bbed0461c9a QT5CHARTS_SITE = $(QT5_SITE)/qtcharts/-/archive/$(QT5CHARTS_VERSION) QT5CHARTS_SOURCE = qtcharts-$(QT5CHARTS_VERSION).tar.bz2 QT5CHARTS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5declarative/qt5declarative.hash b/package/qt5/qt5declarative/qt5declarative.hash index 00c9a04432..0e7978dc58 100644 --- a/package/qt5/qt5declarative/qt5declarative.hash +++ b/package/qt5/qt5declarative/qt5declarative.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0dd6b29bb19ad419d47d1fb612b39b1834d675fd1c58b80cd85c7d3da98b40bf qtdeclarative-51efb2ed2f071beda188270a23ac450fe4b318f7.tar.bz2 +sha256 dbe0cdf84767564a56abf9d0d867c9cfcc754827169357a0f8162309c11882b5 qtdeclarative-b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5declarative/qt5declarative.mk b/package/qt5/qt5declarative/qt5declarative.mk index cece8e476b..18c1608fca 100644 --- a/package/qt5/qt5declarative/qt5declarative.mk +++ b/package/qt5/qt5declarative/qt5declarative.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5DECLARATIVE_VERSION = 51efb2ed2f071beda188270a23ac450fe4b318f7 +QT5DECLARATIVE_VERSION = b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a QT5DECLARATIVE_SITE = $(QT5_SITE)/qtdeclarative/-/archive/$(QT5DECLARATIVE_VERSION) QT5DECLARATIVE_SOURCE = qtdeclarative-$(QT5DECLARATIVE_VERSION).tar.bz2 QT5DECLARATIVE_INSTALL_STAGING = YES diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash index 5de13a176d..95567b2476 100644 --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 83ee3888473fb786c1615c4b98320a9b1eeeb66dbc1ef9743b8339718594e48e qtgraphicaleffects-4c6ec38635aa22cf0854df8e710733c529f4ec02.tar.bz2 +sha256 de41af344889d35252fec9a6b6c78e1f67b7a7be15a5d3986b2ec20e2fcafadc qtgraphicaleffects-e6e1e58ec28fd0f2e6426e6962cc4ccddb493349.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk index e4c464b8c7..f829c67122 100644 --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5GRAPHICALEFFECTS_VERSION = 4c6ec38635aa22cf0854df8e710733c529f4ec02 +QT5GRAPHICALEFFECTS_VERSION = e6e1e58ec28fd0f2e6426e6962cc4ccddb493349 QT5GRAPHICALEFFECTS_SITE = $(QT5_SITE)/qtgraphicaleffects/-/archive/$(QT5GRAPHICALEFFECTS_VERSION) QT5GRAPHICALEFFECTS_SOURCE = qtgraphicaleffects-$(QT5GRAPHICALEFFECTS_VERSION).tar.bz2 QT5GRAPHICALEFFECTS_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5imageformats/qt5imageformats.hash b/package/qt5/qt5imageformats/qt5imageformats.hash index 9b8a788cae..9d821672b3 100644 --- a/package/qt5/qt5imageformats/qt5imageformats.hash +++ b/package/qt5/qt5imageformats/qt5imageformats.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 4ce1982ccf3232d25187286ca4893bcf00b149cf9f6706f06f60d908fab480a0 qtimageformats-b43e31b9f31ec482ddea2066fda7ca9315512815.tar.bz2 +sha256 8bf646d4db7d0099dd49b7c049a64fb585a3e180d73fc2b6edf22a1384529d1d qtimageformats-9044695f4b1acdd7ec24e7b01f6a6ca61f982a75.tar.bz2 # Hashes for license files: sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 diff --git a/package/qt5/qt5imageformats/qt5imageformats.mk b/package/qt5/qt5imageformats/qt5imageformats.mk index 2cc8e0f17b..0ce6e4ffb4 100644 --- a/package/qt5/qt5imageformats/qt5imageformats.mk +++ b/package/qt5/qt5imageformats/qt5imageformats.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5IMAGEFORMATS_VERSION = b43e31b9f31ec482ddea2066fda7ca9315512815 +QT5IMAGEFORMATS_VERSION = 9044695f4b1acdd7ec24e7b01f6a6ca61f982a75 QT5IMAGEFORMATS_SITE = $(QT5_SITE)/qtimageformats/-/archive/$(QT5IMAGEFORMATS_VERSION) QT5IMAGEFORMATS_SOURCE = qtimageformats-$(QT5IMAGEFORMATS_VERSION).tar.bz2 QT5IMAGEFORMATS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5location/qt5location.hash b/package/qt5/qt5location/qt5location.hash index e41b20fd9b..f73053f388 100644 --- a/package/qt5/qt5location/qt5location.hash +++ b/package/qt5/qt5location/qt5location.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f9673cb1e5b88b4c43d663d7b9b666ff82d6843bf2b445805367cf537839a782 qt5location-db3b6bc6afed6477e6ab2d8465e41efee30fb6d5-br1.tar.gz +sha256 90b57a335d8c7311a86865a56b2b9cd944a8a1cafa6a7499de5b35a105c5b247 qt5location-ebdf5b38da6e3fe0a183702bcca395c589c459ed-br1.tar.gz # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5location/qt5location.mk b/package/qt5/qt5location/qt5location.mk index a61994fa53..904d31a983 100644 --- a/package/qt5/qt5location/qt5location.mk +++ b/package/qt5/qt5location/qt5location.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5LOCATION_VERSION = db3b6bc6afed6477e6ab2d8465e41efee30fb6d5 +QT5LOCATION_VERSION = ebdf5b38da6e3fe0a183702bcca395c589c459ed QT5LOCATION_SITE = $(QT5_SITE)/qtlocation QT5LOCATION_SITE_METHOD = git QT5LOCATION_GIT_SUBMODULES = YES diff --git a/package/qt5/qt5lottie/qt5lottie.hash b/package/qt5/qt5lottie/qt5lottie.hash index c5c71ddf6c..cbd94fd111 100644 --- a/package/qt5/qt5lottie/qt5lottie.hash +++ b/package/qt5/qt5lottie/qt5lottie.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 7e006b7a3608f0737f41682352819c404db4c1506d9ebe82eb4af7b1ae652d14 qtlottie-ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac.tar.bz2 +sha256 82336dd063f8bedc28e9545cc8c0123053434d6c681e470434c80ad3908ca4b0 qtlottie-d40b67401afe7156b03c62c9a4d517b07555fe64.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5lottie/qt5lottie.mk b/package/qt5/qt5lottie/qt5lottie.mk index d02d693401..42a920582a 100644 --- a/package/qt5/qt5lottie/qt5lottie.mk +++ b/package/qt5/qt5lottie/qt5lottie.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5LOTTIE_VERSION = ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac +QT5LOTTIE_VERSION = d40b67401afe7156b03c62c9a4d517b07555fe64 QT5LOTTIE_SITE = $(QT5_SITE)/qtlottie/-/archive/$(QT5LOTTIE_VERSION) QT5LOTTIE_SOURCE = qtlottie-$(QT5LOTTIE_VERSION).tar.bz2 QT5LOTTIE_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5multimedia/qt5multimedia.hash b/package/qt5/qt5multimedia/qt5multimedia.hash index 527e3948b8..4803ef9230 100644 --- a/package/qt5/qt5multimedia/qt5multimedia.hash +++ b/package/qt5/qt5multimedia/qt5multimedia.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 b6a17deafe7ea7ad44e2852a92ea73b0089beaf9f24cb3434d018db9b8170ee6 qtmultimedia-dc0ee181d4c56ff66c989bd3292dad7cc35e234b.tar.bz2 +sha256 842c5be64dafe7a68d2b120e24faffd14af6e4d9d8e9c0aa8bbf4330b3491aa3 qtmultimedia-76f84c545429a1b988b79f971734ef4bc3e6643f.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5multimedia/qt5multimedia.mk b/package/qt5/qt5multimedia/qt5multimedia.mk index bf2126b285..0d0f5dd53d 100644 --- a/package/qt5/qt5multimedia/qt5multimedia.mk +++ b/package/qt5/qt5multimedia/qt5multimedia.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5MULTIMEDIA_VERSION = dc0ee181d4c56ff66c989bd3292dad7cc35e234b +QT5MULTIMEDIA_VERSION = 76f84c545429a1b988b79f971734ef4bc3e6643f QT5MULTIMEDIA_SITE = $(QT5_SITE)/qtmultimedia/-/archive/$(QT5MULTIMEDIA_VERSION) QT5MULTIMEDIA_SOURCE = qtmultimedia-$(QT5MULTIMEDIA_VERSION).tar.bz2 QT5MULTIMEDIA_INSTALL_STAGING = YES diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash index 45af81c99f..05a021e8b2 100644 --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c2ddcf9c524ef12a0786c410ac4b3c6d4be9aa17db71f2ea8c57ff615fda62dd qtquickcontrols-d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b.tar.bz2 +sha256 e2c7bc6346a8eb4c21510f8fbf7e752648f68a0c5af8525a784e64503570f72c qtquickcontrols-e62b8b6d2f45a79652238b33f4bbe23023004ae7.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk index 5903e6d69c..25c1a74f5c 100644 --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKCONTROLS_VERSION = d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b +QT5QUICKCONTROLS_VERSION = e62b8b6d2f45a79652238b33f4bbe23023004ae7 QT5QUICKCONTROLS_SITE = $(QT5_SITE)/qtquickcontrols/-/archive/$(QT5QUICKCONTROLS_VERSION) QT5QUICKCONTROLS_SOURCE = qtquickcontrols-$(QT5QUICKCONTROLS_VERSION).tar.bz2 QT5QUICKCONTROLS_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash index 7d81b61407..88777a5cc3 100644 --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0c4204257be906c13f863b9481bb20ad616c9a80a074b6f160f863ac046dad27 qtquickcontrols2-0d3d39e821ea7634c174a29910c18d7101bce6f7.tar.bz2 +sha256 53caea73e6bdf234cb445067be3bc4e07ed59af7da967638ac598188b719958e qtquickcontrols2-74e8db97fdb9b55c4b4614b83f4bf17e00df55e9.tar.bz2 # Hashes for license files: sha256 d2cfc059acb4abd8e513cd0a73cd8489f34cbafa7bc34d5d31fb3210821cf8ca LICENSE.GPLv3 diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk index f847ec95ab..1732921203 100644 --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKCONTROLS2_VERSION = 0d3d39e821ea7634c174a29910c18d7101bce6f7 +QT5QUICKCONTROLS2_VERSION = 74e8db97fdb9b55c4b4614b83f4bf17e00df55e9 QT5QUICKCONTROLS2_SITE = $(QT5_SITE)/qtquickcontrols2/-/archive/$(QT5QUICKCONTROLS2_VERSION) QT5QUICKCONTROLS2_SOURCE = qtquickcontrols2-$(QT5QUICKCONTROLS2_VERSION).tar.bz2 QT5QUICKCONTROLS2_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash index e68f66edd8..a8acf3c5a2 100644 --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 ab113ead993206de4025c78fd2babea69824f52ff88fa78451b6bbcb932a6ab6 qtquicktimeline-2ce816fa5822bcc1c47678447405b2e5dc1312c1.tar.bz2 +sha256 d22637609c4afcc7560d92c894eb55d4afa01706bb5c86499bf56f7c8723a605 qtquicktimeline-87ad61716a7cba5a070d8a7b1756c8b2b48d5d53.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk index 70cca38ff4..de94bd0375 100644 --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5QUICKTIMELINE_VERSION = 2ce816fa5822bcc1c47678447405b2e5dc1312c1 +QT5QUICKTIMELINE_VERSION = 87ad61716a7cba5a070d8a7b1756c8b2b48d5d53 QT5QUICKTIMELINE_SITE = $(QT5_SITE)/qtquicktimeline/-/archive/$(QT5QUICKTIMELINE_VERSION) QT5QUICKTIMELINE_SOURCE = qtquicktimeline-$(QT5QUICKTIMELINE_VERSION).tar.bz2 QT5QUICKTIMELINE_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash index 980101c7fb..1b41ab675f 100644 --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 f51631a142ac47a03266496dae9d07c734f092a0afe8c4e18cd78b7cf9c17b38 qtremoteobjects-809412e1cc2151c21f843796ef67705600f6aafb.tar.bz2 +sha256 ef8e1f64911f7e03da6306693031fdf953af00d453ec154497178bb7ceab1aa2 qtremoteobjects-aa705010da0f658b78c1155babce7091ae44529a.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk index 984f392dda..3160d37ad7 100644 --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5REMOTEOBJECTS_VERSION = 809412e1cc2151c21f843796ef67705600f6aafb +QT5REMOTEOBJECTS_VERSION = aa705010da0f658b78c1155babce7091ae44529a QT5REMOTEOBJECTS_SITE = $(QT5_SITE)/qtremoteobjects/-/archive/$(QT5REMOTEOBJECTS_VERSION) QT5REMOTEOBJECTS_SOURCE = qtremoteobjects-$(QT5REMOTEOBJECTS_VERSION).tar.bz2 QT5REMOTEOBJECTS_DEPENDENCIES = qt5base diff --git a/package/qt5/qt5script/qt5script.hash b/package/qt5/qt5script/qt5script.hash index b3e10491fd..d6572be818 100644 --- a/package/qt5/qt5script/qt5script.hash +++ b/package/qt5/qt5script/qt5script.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fc625c1682d7ee5d1092255408cbaf08d5cac52eb45bacd3ab52937dc84d91f2 qtscript-5cec94b2c1503f106f4ef4778d016410ebb86211.tar.bz2 +sha256 7731d8c85636d039a2b35a9ee0de7b5ebb0c3900a9b4845676041ce91f56f01f qtscript-f237e324508dcf0dbabde9dd498eda9fa61c4ff0.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5script/qt5script.mk b/package/qt5/qt5script/qt5script.mk index 313895f11b..96cbbfbbad 100644 --- a/package/qt5/qt5script/qt5script.mk +++ b/package/qt5/qt5script/qt5script.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SCRIPT_VERSION = 5cec94b2c1503f106f4ef4778d016410ebb86211 +QT5SCRIPT_VERSION = f237e324508dcf0dbabde9dd498eda9fa61c4ff0 QT5SCRIPT_SITE = $(QT5_SITE)/qtscript/-/archive/$(QT5SCRIPT_VERSION) QT5SCRIPT_SOURCE = qtscript-$(QT5SCRIPT_VERSION).tar.bz2 QT5SCRIPT_INSTALL_STAGING = YES diff --git a/package/qt5/qt5scxml/qt5scxml.hash b/package/qt5/qt5scxml/qt5scxml.hash index 1c11ae5853..f4d52b8a52 100644 --- a/package/qt5/qt5scxml/qt5scxml.hash +++ b/package/qt5/qt5scxml/qt5scxml.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 5fc3e6166ab3588242864c5d8f18235a45f5c3396482ccfeb8590fe67d0cd549 qtscxml-dcbd73cf3e8a07dbfa249d7db2257caafa83781b.tar.bz2 +sha256 a0113f54d9df14ebae15dd85530f87f093a284372ee8237d1ccceb02e6a4607b qtscxml-631fd7bcc34802b7650c2b1dc73691463954d982.tar.bz2 # Hashes for license files: sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT diff --git a/package/qt5/qt5scxml/qt5scxml.mk b/package/qt5/qt5scxml/qt5scxml.mk index af18b84e9d..f6ccb9298e 100644 --- a/package/qt5/qt5scxml/qt5scxml.mk +++ b/package/qt5/qt5scxml/qt5scxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SCXML_VERSION = dcbd73cf3e8a07dbfa249d7db2257caafa83781b +QT5SCXML_VERSION = 631fd7bcc34802b7650c2b1dc73691463954d982 QT5SCXML_SITE = $(QT5_SITE)/qtscxml/-/archive/$(QT5SCXML_VERSION) QT5SCXML_SOURCE = qtscxml-$(QT5SCXML_VERSION).tar.bz2 QT5SCXML_DEPENDENCIES = qt5declarative diff --git a/package/qt5/qt5sensors/qt5sensors.hash b/package/qt5/qt5sensors/qt5sensors.hash index 559f02e7f6..d43fa8ba65 100644 --- a/package/qt5/qt5sensors/qt5sensors.hash +++ b/package/qt5/qt5sensors/qt5sensors.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fa0ffba89fed2086d06dab84074cdd789acbfb89da6f64c40a64fc3bc067832e qtsensors-1ab8d6c7257f9ec060739b648704be1cf1c16b05.tar.bz2 +sha256 8325826a259189fc7dea66651df4022a92a73664e953f86bce5bf5946ebacdf5 qtsensors-35eb5ac7eaef4745a38958c3ca780d7baa2e4f30.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5sensors/qt5sensors.mk b/package/qt5/qt5sensors/qt5sensors.mk index 299fab3db0..40bb72e038 100644 --- a/package/qt5/qt5sensors/qt5sensors.mk +++ b/package/qt5/qt5sensors/qt5sensors.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SENSORS_VERSION = 1ab8d6c7257f9ec060739b648704be1cf1c16b05 +QT5SENSORS_VERSION = 35eb5ac7eaef4745a38958c3ca780d7baa2e4f30 QT5SENSORS_SITE = $(QT5_SITE)/qtsensors/-/archive/$(QT5SENSORS_VERSION) QT5SENSORS_SOURCE = qtsensors-$(QT5SENSORS_VERSION).tar.bz2 QT5SENSORS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5serialbus/qt5serialbus.hash b/package/qt5/qt5serialbus/qt5serialbus.hash index b8f96cf0c0..01ffd7c215 100644 --- a/package/qt5/qt5serialbus/qt5serialbus.hash +++ b/package/qt5/qt5serialbus/qt5serialbus.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 caaccfdabdf502c3aacf9fa842ed31ed7682cab6ada69b06be1ba49273fb1f1c qtserialbus-e34053fbda8d687e3dc294fbd5e3a88bf94a7a66.tar.bz2 +sha256 fe08415d2348797429dc09722478630ceee3d7477652a2712460e79127b7291b qtserialbus-f9f7eee60adac72fcf6617d164e3bf61222bb5c5.tar.bz2 # Hashes for license files: sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 diff --git a/package/qt5/qt5serialbus/qt5serialbus.mk b/package/qt5/qt5serialbus/qt5serialbus.mk index 70f23ce407..c718414932 100644 --- a/package/qt5/qt5serialbus/qt5serialbus.mk +++ b/package/qt5/qt5serialbus/qt5serialbus.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SERIALBUS_VERSION = e34053fbda8d687e3dc294fbd5e3a88bf94a7a66 +QT5SERIALBUS_VERSION = f9f7eee60adac72fcf6617d164e3bf61222bb5c5 QT5SERIALBUS_SITE = $(QT5_SITE)/qtserialbus/-/archive/$(QT5SERIALBUS_VERSION) QT5SERIALBUS_SOURCE = qtserialbus-$(QT5SERIALBUS_VERSION).tar.bz2 QT5SERIALBUS_DEPENDENCIES = qt5serialport diff --git a/package/qt5/qt5serialport/qt5serialport.hash b/package/qt5/qt5serialport/qt5serialport.hash index d25b2193e7..58461430c7 100644 --- a/package/qt5/qt5serialport/qt5serialport.hash +++ b/package/qt5/qt5serialport/qt5serialport.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 83abb0c5b9c435a031abf1a36d6d44f8e3f5e2fc16150bdc78c6d33b25386bb6 qtserialport-191e67e428522a0e2e1e8d2f3440607a9760d441.tar.bz2 +sha256 6d49d0da174632f51291b0190f6f1db2397a3b339cf293514252766f8a20c63b qtserialport-c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5serialport/qt5serialport.mk b/package/qt5/qt5serialport/qt5serialport.mk index cd96df2007..7d00bd2ab7 100644 --- a/package/qt5/qt5serialport/qt5serialport.mk +++ b/package/qt5/qt5serialport/qt5serialport.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SERIALPORT_VERSION = 191e67e428522a0e2e1e8d2f3440607a9760d441 +QT5SERIALPORT_VERSION = c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694 QT5SERIALPORT_SITE = $(QT5_SITE)/qtserialport/-/archive/$(QT5SERIALPORT_VERSION) QT5SERIALPORT_SOURCE = qtserialport-$(QT5SERIALPORT_VERSION).tar.bz2 QT5SERIALPORT_INSTALL_STAGING = YES diff --git a/package/qt5/qt5svg/qt5svg.hash b/package/qt5/qt5svg/qt5svg.hash index 424891ac2c..4816206d64 100644 --- a/package/qt5/qt5svg/qt5svg.hash +++ b/package/qt5/qt5svg/qt5svg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 eeb4175f0b2c3299abf0ca9d751886612dad5ecd212c954f9801b28b4696f4f7 qtsvg-23b8cf7d833c335d7735855570c05e9e0893a9b7.tar.bz2 +sha256 063ee53515b934c00a65838fe8521142e4a9161b07c8e19b5bb0ea26a0ce9ab3 qtsvg-a9752b00a03438de8e5b080073816e12409404b7.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5svg/qt5svg.mk b/package/qt5/qt5svg/qt5svg.mk index 3072fd7a18..2a39ed18fe 100644 --- a/package/qt5/qt5svg/qt5svg.mk +++ b/package/qt5/qt5svg/qt5svg.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5SVG_VERSION = 23b8cf7d833c335d7735855570c05e9e0893a9b7 +QT5SVG_VERSION = a9752b00a03438de8e5b080073816e12409404b7 QT5SVG_SITE = $(QT5_SITE)/qtsvg/-/archive/$(QT5SVG_VERSION) QT5SVG_SOURCE = qtsvg-$(QT5SVG_VERSION).tar.bz2 QT5SVG_INSTALL_STAGING = YES diff --git a/package/qt5/qt5tools/qt5tools.hash b/package/qt5/qt5tools/qt5tools.hash index 58ed752b9b..d603598257 100644 --- a/package/qt5/qt5tools/qt5tools.hash +++ b/package/qt5/qt5tools/qt5tools.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 76052a183a41fcddfd4446ffba6a99c3e77a21453fe629cf67379ffa617a0d53 qttools-53ee43a51b5a3de2877dafffc78e71ff55926708.tar.bz2 +sha256 b6eebbd61dcde981d63ce6de39b3c957bad8f11b0140585ba4d57d166c4dd79d qttools-32912a06aadfc3dcbc34e0a668ce2c78351eee6e.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5tools/qt5tools.mk b/package/qt5/qt5tools/qt5tools.mk index e87c9b50a5..a01a336584 100644 --- a/package/qt5/qt5tools/qt5tools.mk +++ b/package/qt5/qt5tools/qt5tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5TOOLS_VERSION = 53ee43a51b5a3de2877dafffc78e71ff55926708 +QT5TOOLS_VERSION = 32912a06aadfc3dcbc34e0a668ce2c78351eee6e QT5TOOLS_SITE = $(QT5_SITE)/qttools/-/archive/$(QT5TOOLS_VERSION) QT5TOOLS_SOURCE = qttools-$(QT5TOOLS_VERSION).tar.bz2 diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash index 1cdd8f0386..60d51fa5fe 100644 --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 6ef14ba8bb5eb287320b6c0d6e61c5c2916a94ef754bb8a2d89c123043485d67 qtvirtualkeyboard-e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db.tar.bz2 +sha256 e1e356e81f3a3fb5da6f6739aa475c15aab15090e202de6704441a3bf41c335b qtvirtualkeyboard-9fbb837b55887bec5d73fad142c853ef68db35b3.tar.bz2 # Hashes for license files: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk index c31d455c4e..067db80330 100644 --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5VIRTUALKEYBOARD_VERSION = e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db +QT5VIRTUALKEYBOARD_VERSION = 9fbb837b55887bec5d73fad142c853ef68db35b3 QT5VIRTUALKEYBOARD_SITE = $(QT5_SITE)/qtvirtualkeyboard/-/archive/$(QT5VIRTUALKEYBOARD_VERSION) QT5VIRTUALKEYBOARD_SOURCE = qtvirtualkeyboard-$(QT5VIRTUALKEYBOARD_VERSION).tar.bz2 QT5VIRTUALKEYBOARD_DEPENDENCIES = qt5declarative qt5svg diff --git a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch b/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch deleted file mode 100644 index adad3768b2..0000000000 --- a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 05658e127dedfff65789860415537c6920ec574d Mon Sep 17 00:00:00 2001 -From: Samuli Piippo -Date: Thu, 22 Apr 2021 15:29:56 +0300 -Subject: [PATCH] Add missing define guards - -Ammend cca1b94190a094b5d1d7ce492b6533e2d330c5e8 to use m_composeState -only if xcbcommon is available. - -Pick-to: 5.15 -Change-Id: I48332b15def3282c5bda3e1c7c393ea7e9849cbe -Reviewed-by: Aleix Pol Gonzalez -[Backported from: 05658e127dedfff65789860415537c6920ec574d] -Signed-off-by: Quentin Schulz ---- - src/client/qwaylandinputcontext.cpp | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/src/client/qwaylandinputcontext.cpp b/src/client/qwaylandinputcontext.cpp -index 16e03ea1..cbf63cde 100644 ---- a/src/client/qwaylandinputcontext.cpp -+++ b/src/client/qwaylandinputcontext.cpp -@@ -408,8 +408,10 @@ bool QWaylandInputContext::isValid() const - void QWaylandInputContext::reset() - { - qCDebug(qLcQpaInputMethods) << Q_FUNC_INFO; -+#if QT_CONFIG(xkbcommon) - if (m_composeState) - xkb_compose_state_reset(m_composeState); -+#endif - - QPlatformInputContext::reset(); - --- -2.35.1 - diff --git a/package/qt5/qt5wayland/qt5wayland.hash b/package/qt5/qt5wayland/qt5wayland.hash index 58935ceadc..c9d7f3434c 100644 --- a/package/qt5/qt5wayland/qt5wayland.hash +++ b/package/qt5/qt5wayland/qt5wayland.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 bfe9bce353c036356dc7bca04e634f03c7c924381062ce89627a88df0ae7484e qtwayland-36659e6130ed3fc2b3f0c91423408ef5ecb7b991.tar.bz2 +sha256 c881745403a7c3639ee928f64ac9e7252d7a941cb62ef682a7ee83ccf3ae0a60 qtwayland-8faf74a7966b520f0ac3eb4d88235f8ec63b31b8.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5wayland/qt5wayland.mk b/package/qt5/qt5wayland/qt5wayland.mk index 63fa1f21c0..aeca1b0381 100644 --- a/package/qt5/qt5wayland/qt5wayland.mk +++ b/package/qt5/qt5wayland/qt5wayland.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5WAYLAND_VERSION = 36659e6130ed3fc2b3f0c91423408ef5ecb7b991 +QT5WAYLAND_VERSION = 8faf74a7966b520f0ac3eb4d88235f8ec63b31b8 QT5WAYLAND_SITE = $(QT5_SITE)/qtwayland/-/archive/$(QT5WAYLAND_VERSION) QT5WAYLAND_SOURCE = qtwayland-$(QT5WAYLAND_VERSION).tar.bz2 QT5WAYLAND_DEPENDENCIES = wayland diff --git a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch index dff3e6c849..aeec4c58b1 100644 --- a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch +++ b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch @@ -28,24 +28,25 @@ linking statically by default. [1] https://github.com/qt/qtwebengine-chromium/commit/cfab9198a9917f42cf08b1caf84ab9b71aac1911#diff-905c8f054808213577c0a92d1b704615 Signed-off-by: Romain Naour +Signed-off-by: Giulio Benetti +[Giulio: rebased to qt5.15.10] --- src/buildtools/gn.pro | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/buildtools/gn.pro b/src/buildtools/gn.pro -index 033202e6..5dd8e241 100644 +index f94694da0..19079a5b3 100644 --- a/src/buildtools/gn.pro +++ b/src/buildtools/gn.pro @@ -20,7 +20,8 @@ build_pass|!debug_and_release { - + gn_gen_args = --no-last-commit-position --out-path $$out_path \ --cc \"$$which($$QMAKE_CC)\" --cxx \"$$which($$QMAKE_CXX)\" \ - --ld \"$$which($$QMAKE_LINK)\" + --ld \"$$which($$QMAKE_LINK)\" \ + --no-static-libstdc++ - - msvc:!clang_cl: gn_gen_args += --use-lto - --- -2.25.4 + !isEmpty(QMAKE_AR): gn_gen_args += --ar \"$$which($$first(QMAKE_AR))\" + msvc:!clang_cl: gn_gen_args += --use-lto +-- +2.34.1 diff --git a/package/qt5/qt5webengine/qt5webengine.hash b/package/qt5/qt5webengine/qt5webengine.hash index 1d2b70c4f6..038446a9f4 100644 --- a/package/qt5/qt5webengine/qt5webengine.hash +++ b/package/qt5/qt5webengine/qt5webengine.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 fb7abcf88d4336d55565627e18b33df1855fefb0f12e24931b6a7decbe60913b qtwebengine-v5.15.8-lts.tar.bz2 +sha256 4a3456df42e1c1b859232b3ee1d58360e629d55daf6e5ad308871142c1b0c2fa qtwebengine-v5.15.10-lts.tar.bz2 # Locally calculated sha256 f34787ef0342c614b667186a6ec2f5d6b9d650e30142a2788a589a89743e88e9 LICENSE.Chromium diff --git a/package/qt5/qt5webview/qt5webview.mk b/package/qt5/qt5webview/qt5webview.mk index 54da733e7b..a55fd8ae74 100644 --- a/package/qt5/qt5webview/qt5webview.mk +++ b/package/qt5/qt5webview/qt5webview.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5WEBVIEW_VERSION = 826d2a33929c69807917536d48b7861e7682001e +QT5WEBVIEW_VERSION = 87577dde04ed219bda776dabca86176149736331 QT5WEBVIEW_SITE = $(QT5_SITE)/qtwebview/-/archive/$(QT5WEBVIEW_VERSION) QT5WEBVIEW_SOURCE = qtwebview-$(QT5WEBVIEW_VERSION).tar.bz2 QT5WEBVIEW_DEPENDENCIES = qt5webengine diff --git a/package/qt5/qt5x11extras/qt5x11extras.mk b/package/qt5/qt5x11extras/qt5x11extras.mk index fb6650e84a..80c5498518 100644 --- a/package/qt5/qt5x11extras/qt5x11extras.mk +++ b/package/qt5/qt5x11extras/qt5x11extras.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5X11EXTRAS_VERSION = 51b0a5a2e3e35f4cb17da1e7cb4babef6294bfb4 +QT5X11EXTRAS_VERSION = 982f20eb585d77e5b5c721e05a466d7161f7f2d1 QT5X11EXTRAS_SITE = $(QT5_SITE)/qtx11extras/-/archive/$(QT5X11EXTRAS_VERSION) QT5X11EXTRAS_SOURCE = qtx11extras-$(QT5X11EXTRAS_VERSION).tar.bz2 QT5X11EXTRAS_INSTALL_STAGING = YES diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash index a1dbb40154..353dfc8485 100644 --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 6243e6334c0d1467e3e5bdecd981d7e673f4cc99cf2cee3b99597be4218a4bd2 qtxmlpatterns-dfcae10dec8c1c2c544ad0cd303cea113b0af51d.tar.bz2 +sha256 067b801049f6fada8e7ebcfbce0530db6217a1a94b8ed34c99c530be4129889d qtxmlpatterns-30e6c84fe2752cde8b53aff9d38c2095cd7c8761.tar.bz2 # Hashes for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk index 6711e9bf70..803c36cf04 100644 --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk @@ -4,7 +4,7 @@ # ################################################################################ -QT5XMLPATTERNS_VERSION = dfcae10dec8c1c2c544ad0cd303cea113b0af51d +QT5XMLPATTERNS_VERSION = 30e6c84fe2752cde8b53aff9d38c2095cd7c8761 QT5XMLPATTERNS_SITE = $(QT5_SITE)/qtxmlpatterns/-/archive/$(QT5XMLPATTERNS_VERSION) QT5XMLPATTERNS_SOURCE = qtxmlpatterns-$(QT5XMLPATTERNS_VERSION).tar.bz2 QT5XMLPATTERNS_INSTALL_STAGING = YES -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 12 19:18:21 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 12 Oct 2022 21:18:21 +0200 Subject: [Buildroot] [PATCH] package/qt5: bump packages to latest kde submodule versions In-Reply-To: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> References: <20221012190534.51237-1-giulio.benetti@benettiengineering.com> Message-ID: <0700d1b5-83e3-961d-f3d8-17a1a56f1d92@benettiengineering.com> Sorry I've forgotten: On 12/10/22 21:05, Giulio Benetti wrote: > Bump qt5 packages to latest submodule versions from: > https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15 > > Drop a qt5wayland patch which is now upstream. Drop a qt5wayland and a qt5virtualkeyboard local patches that are now upstream. Best regards -- Giulio Benetti Benetti Engineering sas > > Signed-off-by: Giulio Benetti > --- > package/qt5/qt5.mk | 2 +- > package/qt5/qt5base/qt5base.hash | 2 +- > package/qt5/qt5base/qt5base.mk | 2 +- > package/qt5/qt5charts/qt5charts.hash | 2 +- > package/qt5/qt5charts/qt5charts.mk | 2 +- > .../qt5/qt5declarative/qt5declarative.hash | 2 +- > package/qt5/qt5declarative/qt5declarative.mk | 2 +- > .../qt5graphicaleffects.hash | 2 +- > .../qt5graphicaleffects.mk | 2 +- > .../qt5/qt5imageformats/qt5imageformats.hash | 2 +- > .../qt5/qt5imageformats/qt5imageformats.mk | 2 +- > package/qt5/qt5location/qt5location.hash | 2 +- > package/qt5/qt5location/qt5location.mk | 2 +- > package/qt5/qt5lottie/qt5lottie.hash | 2 +- > package/qt5/qt5lottie/qt5lottie.mk | 2 +- > package/qt5/qt5multimedia/qt5multimedia.hash | 2 +- > package/qt5/qt5multimedia/qt5multimedia.mk | 2 +- > .../qt5quickcontrols/qt5quickcontrols.hash | 2 +- > .../qt5/qt5quickcontrols/qt5quickcontrols.mk | 2 +- > .../qt5quickcontrols2/qt5quickcontrols2.hash | 2 +- > .../qt5quickcontrols2/qt5quickcontrols2.mk | 2 +- > .../qt5quicktimeline/qt5quicktimeline.hash | 2 +- > .../qt5/qt5quicktimeline/qt5quicktimeline.mk | 2 +- > .../qt5remoteobjects/qt5remoteobjects.hash | 2 +- > .../qt5/qt5remoteobjects/qt5remoteobjects.mk | 2 +- > package/qt5/qt5script/qt5script.hash | 2 +- > package/qt5/qt5script/qt5script.mk | 2 +- > package/qt5/qt5scxml/qt5scxml.hash | 2 +- > package/qt5/qt5scxml/qt5scxml.mk | 2 +- > package/qt5/qt5sensors/qt5sensors.hash | 2 +- > package/qt5/qt5sensors/qt5sensors.mk | 2 +- > package/qt5/qt5serialbus/qt5serialbus.hash | 2 +- > package/qt5/qt5serialbus/qt5serialbus.mk | 2 +- > package/qt5/qt5serialport/qt5serialport.hash | 2 +- > package/qt5/qt5serialport/qt5serialport.mk | 2 +- > package/qt5/qt5svg/qt5svg.hash | 2 +- > package/qt5/qt5svg/qt5svg.mk | 2 +- > package/qt5/qt5tools/qt5tools.hash | 2 +- > package/qt5/qt5tools/qt5tools.mk | 2 +- > .../qt5virtualkeyboard.hash | 2 +- > .../qt5virtualkeyboard/qt5virtualkeyboard.mk | 2 +- > .../0001-Add-missing-define-guards.patch | 35 ------------------- > package/qt5/qt5wayland/qt5wayland.hash | 2 +- > package/qt5/qt5wayland/qt5wayland.mk | 2 +- > ...ro-don-t-link-statically-with-libstc.patch | 15 ++++---- > package/qt5/qt5webengine/qt5webengine.hash | 2 +- > package/qt5/qt5webview/qt5webview.mk | 2 +- > package/qt5/qt5x11extras/qt5x11extras.mk | 2 +- > .../qt5/qt5xmlpatterns/qt5xmlpatterns.hash | 2 +- > package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk | 2 +- > 50 files changed, 56 insertions(+), 90 deletions(-) > delete mode 100644 package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > > diff --git a/package/qt5/qt5.mk b/package/qt5/qt5.mk > index 0706c3548d..b55accacf1 100644 > --- a/package/qt5/qt5.mk > +++ b/package/qt5/qt5.mk > @@ -5,7 +5,7 @@ > ################################################################################ > > QT5_VERSION_MAJOR = 5.15 > -QT5_VERSION = $(QT5_VERSION_MAJOR).8 > +QT5_VERSION = $(QT5_VERSION_MAJOR).10 > QT5_SITE = https://invent.kde.org/qt/qt > > include $(sort $(wildcard package/qt5/*/*.mk)) > diff --git a/package/qt5/qt5base/qt5base.hash b/package/qt5/qt5base/qt5base.hash > index 27d2b99c34..4efc8fa172 100644 > --- a/package/qt5/qt5base/qt5base.hash > +++ b/package/qt5/qt5base/qt5base.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 ecff8cf42af98c2294f7c99eb8c41564892f470382adaf8f4048c85252849808 qtbase-2ffb7ad8a1079a0444b9c72affe3d19b089b60de.tar.bz2 > +sha256 5622a9053154af9a353b8e8be217104c6af068b5b5aba8b07ef4fea2dc79fded qtbase-e44097b63d17ba3178a637df7fac51ddc51cb48b.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5base/qt5base.mk b/package/qt5/qt5base/qt5base.mk > index efa0e16e9a..028236d2ed 100644 > --- a/package/qt5/qt5base/qt5base.mk > +++ b/package/qt5/qt5base/qt5base.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5BASE_VERSION = 2ffb7ad8a1079a0444b9c72affe3d19b089b60de > +QT5BASE_VERSION = e44097b63d17ba3178a637df7fac51ddc51cb48b > QT5BASE_SITE = $(QT5_SITE)/qtbase/-/archive/$(QT5BASE_VERSION) > QT5BASE_SOURCE = qtbase-$(QT5BASE_VERSION).tar.bz2 > > diff --git a/package/qt5/qt5charts/qt5charts.hash b/package/qt5/qt5charts/qt5charts.hash > index ba22e29996..0688f64615 100644 > --- a/package/qt5/qt5charts/qt5charts.hash > +++ b/package/qt5/qt5charts/qt5charts.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 32119f7ac88c250b24835b91a71510bf673f1cede6e572fd1059debf8325d7ff qtcharts-16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5.tar.bz2 > +sha256 9d2ad94a054bd7df08e5d11bc77b6422ccecbf99ea8dd6f06908bafc72ea869d qtcharts-841083c263f16f8acb81e4915bf24bbed0461c9a.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5charts/qt5charts.mk b/package/qt5/qt5charts/qt5charts.mk > index 0028c9f8cb..fa69263be4 100644 > --- a/package/qt5/qt5charts/qt5charts.mk > +++ b/package/qt5/qt5charts/qt5charts.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5CHARTS_VERSION = 16c2a8821135bf89369c4e3c5a1bdff8b05ffdb5 > +QT5CHARTS_VERSION = 841083c263f16f8acb81e4915bf24bbed0461c9a > QT5CHARTS_SITE = $(QT5_SITE)/qtcharts/-/archive/$(QT5CHARTS_VERSION) > QT5CHARTS_SOURCE = qtcharts-$(QT5CHARTS_VERSION).tar.bz2 > QT5CHARTS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5declarative/qt5declarative.hash b/package/qt5/qt5declarative/qt5declarative.hash > index 00c9a04432..0e7978dc58 100644 > --- a/package/qt5/qt5declarative/qt5declarative.hash > +++ b/package/qt5/qt5declarative/qt5declarative.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 0dd6b29bb19ad419d47d1fb612b39b1834d675fd1c58b80cd85c7d3da98b40bf qtdeclarative-51efb2ed2f071beda188270a23ac450fe4b318f7.tar.bz2 > +sha256 dbe0cdf84767564a56abf9d0d867c9cfcc754827169357a0f8162309c11882b5 qtdeclarative-b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5declarative/qt5declarative.mk b/package/qt5/qt5declarative/qt5declarative.mk > index cece8e476b..18c1608fca 100644 > --- a/package/qt5/qt5declarative/qt5declarative.mk > +++ b/package/qt5/qt5declarative/qt5declarative.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5DECLARATIVE_VERSION = 51efb2ed2f071beda188270a23ac450fe4b318f7 > +QT5DECLARATIVE_VERSION = b3aaf1482c48bbc0ca4f7c7934597c055afe4b6a > QT5DECLARATIVE_SITE = $(QT5_SITE)/qtdeclarative/-/archive/$(QT5DECLARATIVE_VERSION) > QT5DECLARATIVE_SOURCE = qtdeclarative-$(QT5DECLARATIVE_VERSION).tar.bz2 > QT5DECLARATIVE_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > index 5de13a176d..95567b2476 100644 > --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 83ee3888473fb786c1615c4b98320a9b1eeeb66dbc1ef9743b8339718594e48e qtgraphicaleffects-4c6ec38635aa22cf0854df8e710733c529f4ec02.tar.bz2 > +sha256 de41af344889d35252fec9a6b6c78e1f67b7a7be15a5d3986b2ec20e2fcafadc qtgraphicaleffects-e6e1e58ec28fd0f2e6426e6962cc4ccddb493349.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > index e4c464b8c7..f829c67122 100644 > --- a/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > +++ b/package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5GRAPHICALEFFECTS_VERSION = 4c6ec38635aa22cf0854df8e710733c529f4ec02 > +QT5GRAPHICALEFFECTS_VERSION = e6e1e58ec28fd0f2e6426e6962cc4ccddb493349 > QT5GRAPHICALEFFECTS_SITE = $(QT5_SITE)/qtgraphicaleffects/-/archive/$(QT5GRAPHICALEFFECTS_VERSION) > QT5GRAPHICALEFFECTS_SOURCE = qtgraphicaleffects-$(QT5GRAPHICALEFFECTS_VERSION).tar.bz2 > QT5GRAPHICALEFFECTS_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5imageformats/qt5imageformats.hash b/package/qt5/qt5imageformats/qt5imageformats.hash > index 9b8a788cae..9d821672b3 100644 > --- a/package/qt5/qt5imageformats/qt5imageformats.hash > +++ b/package/qt5/qt5imageformats/qt5imageformats.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 4ce1982ccf3232d25187286ca4893bcf00b149cf9f6706f06f60d908fab480a0 qtimageformats-b43e31b9f31ec482ddea2066fda7ca9315512815.tar.bz2 > +sha256 8bf646d4db7d0099dd49b7c049a64fb585a3e180d73fc2b6edf22a1384529d1d qtimageformats-9044695f4b1acdd7ec24e7b01f6a6ca61f982a75.tar.bz2 > > # Hashes for license files: > sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 > diff --git a/package/qt5/qt5imageformats/qt5imageformats.mk b/package/qt5/qt5imageformats/qt5imageformats.mk > index 2cc8e0f17b..0ce6e4ffb4 100644 > --- a/package/qt5/qt5imageformats/qt5imageformats.mk > +++ b/package/qt5/qt5imageformats/qt5imageformats.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5IMAGEFORMATS_VERSION = b43e31b9f31ec482ddea2066fda7ca9315512815 > +QT5IMAGEFORMATS_VERSION = 9044695f4b1acdd7ec24e7b01f6a6ca61f982a75 > QT5IMAGEFORMATS_SITE = $(QT5_SITE)/qtimageformats/-/archive/$(QT5IMAGEFORMATS_VERSION) > QT5IMAGEFORMATS_SOURCE = qtimageformats-$(QT5IMAGEFORMATS_VERSION).tar.bz2 > QT5IMAGEFORMATS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5location/qt5location.hash b/package/qt5/qt5location/qt5location.hash > index e41b20fd9b..f73053f388 100644 > --- a/package/qt5/qt5location/qt5location.hash > +++ b/package/qt5/qt5location/qt5location.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f9673cb1e5b88b4c43d663d7b9b666ff82d6843bf2b445805367cf537839a782 qt5location-db3b6bc6afed6477e6ab2d8465e41efee30fb6d5-br1.tar.gz > +sha256 90b57a335d8c7311a86865a56b2b9cd944a8a1cafa6a7499de5b35a105c5b247 qt5location-ebdf5b38da6e3fe0a183702bcca395c589c459ed-br1.tar.gz > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5location/qt5location.mk b/package/qt5/qt5location/qt5location.mk > index a61994fa53..904d31a983 100644 > --- a/package/qt5/qt5location/qt5location.mk > +++ b/package/qt5/qt5location/qt5location.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5LOCATION_VERSION = db3b6bc6afed6477e6ab2d8465e41efee30fb6d5 > +QT5LOCATION_VERSION = ebdf5b38da6e3fe0a183702bcca395c589c459ed > QT5LOCATION_SITE = $(QT5_SITE)/qtlocation > QT5LOCATION_SITE_METHOD = git > QT5LOCATION_GIT_SUBMODULES = YES > diff --git a/package/qt5/qt5lottie/qt5lottie.hash b/package/qt5/qt5lottie/qt5lottie.hash > index c5c71ddf6c..cbd94fd111 100644 > --- a/package/qt5/qt5lottie/qt5lottie.hash > +++ b/package/qt5/qt5lottie/qt5lottie.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 7e006b7a3608f0737f41682352819c404db4c1506d9ebe82eb4af7b1ae652d14 qtlottie-ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac.tar.bz2 > +sha256 82336dd063f8bedc28e9545cc8c0123053434d6c681e470434c80ad3908ca4b0 qtlottie-d40b67401afe7156b03c62c9a4d517b07555fe64.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5lottie/qt5lottie.mk b/package/qt5/qt5lottie/qt5lottie.mk > index d02d693401..42a920582a 100644 > --- a/package/qt5/qt5lottie/qt5lottie.mk > +++ b/package/qt5/qt5lottie/qt5lottie.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5LOTTIE_VERSION = ccba2b00bd7f10558edb8664d6b9a95e9fafe6ac > +QT5LOTTIE_VERSION = d40b67401afe7156b03c62c9a4d517b07555fe64 > QT5LOTTIE_SITE = $(QT5_SITE)/qtlottie/-/archive/$(QT5LOTTIE_VERSION) > QT5LOTTIE_SOURCE = qtlottie-$(QT5LOTTIE_VERSION).tar.bz2 > QT5LOTTIE_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5multimedia/qt5multimedia.hash b/package/qt5/qt5multimedia/qt5multimedia.hash > index 527e3948b8..4803ef9230 100644 > --- a/package/qt5/qt5multimedia/qt5multimedia.hash > +++ b/package/qt5/qt5multimedia/qt5multimedia.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 b6a17deafe7ea7ad44e2852a92ea73b0089beaf9f24cb3434d018db9b8170ee6 qtmultimedia-dc0ee181d4c56ff66c989bd3292dad7cc35e234b.tar.bz2 > +sha256 842c5be64dafe7a68d2b120e24faffd14af6e4d9d8e9c0aa8bbf4330b3491aa3 qtmultimedia-76f84c545429a1b988b79f971734ef4bc3e6643f.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5multimedia/qt5multimedia.mk b/package/qt5/qt5multimedia/qt5multimedia.mk > index bf2126b285..0d0f5dd53d 100644 > --- a/package/qt5/qt5multimedia/qt5multimedia.mk > +++ b/package/qt5/qt5multimedia/qt5multimedia.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5MULTIMEDIA_VERSION = dc0ee181d4c56ff66c989bd3292dad7cc35e234b > +QT5MULTIMEDIA_VERSION = 76f84c545429a1b988b79f971734ef4bc3e6643f > QT5MULTIMEDIA_SITE = $(QT5_SITE)/qtmultimedia/-/archive/$(QT5MULTIMEDIA_VERSION) > QT5MULTIMEDIA_SOURCE = qtmultimedia-$(QT5MULTIMEDIA_VERSION).tar.bz2 > QT5MULTIMEDIA_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > index 45af81c99f..05a021e8b2 100644 > --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 c2ddcf9c524ef12a0786c410ac4b3c6d4be9aa17db71f2ea8c57ff615fda62dd qtquickcontrols-d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b.tar.bz2 > +sha256 e2c7bc6346a8eb4c21510f8fbf7e752648f68a0c5af8525a784e64503570f72c qtquickcontrols-e62b8b6d2f45a79652238b33f4bbe23023004ae7.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > index 5903e6d69c..25c1a74f5c 100644 > --- a/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > +++ b/package/qt5/qt5quickcontrols/qt5quickcontrols.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKCONTROLS_VERSION = d405bf6a29bc9d6da6e3dcefbd1b88f5ed70fb1b > +QT5QUICKCONTROLS_VERSION = e62b8b6d2f45a79652238b33f4bbe23023004ae7 > QT5QUICKCONTROLS_SITE = $(QT5_SITE)/qtquickcontrols/-/archive/$(QT5QUICKCONTROLS_VERSION) > QT5QUICKCONTROLS_SOURCE = qtquickcontrols-$(QT5QUICKCONTROLS_VERSION).tar.bz2 > QT5QUICKCONTROLS_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > index 7d81b61407..88777a5cc3 100644 > --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 0c4204257be906c13f863b9481bb20ad616c9a80a074b6f160f863ac046dad27 qtquickcontrols2-0d3d39e821ea7634c174a29910c18d7101bce6f7.tar.bz2 > +sha256 53caea73e6bdf234cb445067be3bc4e07ed59af7da967638ac598188b719958e qtquickcontrols2-74e8db97fdb9b55c4b4614b83f4bf17e00df55e9.tar.bz2 > > # Hashes for license files: > sha256 d2cfc059acb4abd8e513cd0a73cd8489f34cbafa7bc34d5d31fb3210821cf8ca LICENSE.GPLv3 > diff --git a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > index f847ec95ab..1732921203 100644 > --- a/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > +++ b/package/qt5/qt5quickcontrols2/qt5quickcontrols2.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKCONTROLS2_VERSION = 0d3d39e821ea7634c174a29910c18d7101bce6f7 > +QT5QUICKCONTROLS2_VERSION = 74e8db97fdb9b55c4b4614b83f4bf17e00df55e9 > QT5QUICKCONTROLS2_SITE = $(QT5_SITE)/qtquickcontrols2/-/archive/$(QT5QUICKCONTROLS2_VERSION) > QT5QUICKCONTROLS2_SOURCE = qtquickcontrols2-$(QT5QUICKCONTROLS2_VERSION).tar.bz2 > QT5QUICKCONTROLS2_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > index e68f66edd8..a8acf3c5a2 100644 > --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 ab113ead993206de4025c78fd2babea69824f52ff88fa78451b6bbcb932a6ab6 qtquicktimeline-2ce816fa5822bcc1c47678447405b2e5dc1312c1.tar.bz2 > +sha256 d22637609c4afcc7560d92c894eb55d4afa01706bb5c86499bf56f7c8723a605 qtquicktimeline-87ad61716a7cba5a070d8a7b1756c8b2b48d5d53.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > index 70cca38ff4..de94bd0375 100644 > --- a/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > +++ b/package/qt5/qt5quicktimeline/qt5quicktimeline.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5QUICKTIMELINE_VERSION = 2ce816fa5822bcc1c47678447405b2e5dc1312c1 > +QT5QUICKTIMELINE_VERSION = 87ad61716a7cba5a070d8a7b1756c8b2b48d5d53 > QT5QUICKTIMELINE_SITE = $(QT5_SITE)/qtquicktimeline/-/archive/$(QT5QUICKTIMELINE_VERSION) > QT5QUICKTIMELINE_SOURCE = qtquicktimeline-$(QT5QUICKTIMELINE_VERSION).tar.bz2 > QT5QUICKTIMELINE_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > index 980101c7fb..1b41ab675f 100644 > --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 f51631a142ac47a03266496dae9d07c734f092a0afe8c4e18cd78b7cf9c17b38 qtremoteobjects-809412e1cc2151c21f843796ef67705600f6aafb.tar.bz2 > +sha256 ef8e1f64911f7e03da6306693031fdf953af00d453ec154497178bb7ceab1aa2 qtremoteobjects-aa705010da0f658b78c1155babce7091ae44529a.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > index 984f392dda..3160d37ad7 100644 > --- a/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > +++ b/package/qt5/qt5remoteobjects/qt5remoteobjects.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5REMOTEOBJECTS_VERSION = 809412e1cc2151c21f843796ef67705600f6aafb > +QT5REMOTEOBJECTS_VERSION = aa705010da0f658b78c1155babce7091ae44529a > QT5REMOTEOBJECTS_SITE = $(QT5_SITE)/qtremoteobjects/-/archive/$(QT5REMOTEOBJECTS_VERSION) > QT5REMOTEOBJECTS_SOURCE = qtremoteobjects-$(QT5REMOTEOBJECTS_VERSION).tar.bz2 > QT5REMOTEOBJECTS_DEPENDENCIES = qt5base > diff --git a/package/qt5/qt5script/qt5script.hash b/package/qt5/qt5script/qt5script.hash > index b3e10491fd..d6572be818 100644 > --- a/package/qt5/qt5script/qt5script.hash > +++ b/package/qt5/qt5script/qt5script.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fc625c1682d7ee5d1092255408cbaf08d5cac52eb45bacd3ab52937dc84d91f2 qtscript-5cec94b2c1503f106f4ef4778d016410ebb86211.tar.bz2 > +sha256 7731d8c85636d039a2b35a9ee0de7b5ebb0c3900a9b4845676041ce91f56f01f qtscript-f237e324508dcf0dbabde9dd498eda9fa61c4ff0.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5script/qt5script.mk b/package/qt5/qt5script/qt5script.mk > index 313895f11b..96cbbfbbad 100644 > --- a/package/qt5/qt5script/qt5script.mk > +++ b/package/qt5/qt5script/qt5script.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SCRIPT_VERSION = 5cec94b2c1503f106f4ef4778d016410ebb86211 > +QT5SCRIPT_VERSION = f237e324508dcf0dbabde9dd498eda9fa61c4ff0 > QT5SCRIPT_SITE = $(QT5_SITE)/qtscript/-/archive/$(QT5SCRIPT_VERSION) > QT5SCRIPT_SOURCE = qtscript-$(QT5SCRIPT_VERSION).tar.bz2 > QT5SCRIPT_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5scxml/qt5scxml.hash b/package/qt5/qt5scxml/qt5scxml.hash > index 1c11ae5853..f4d52b8a52 100644 > --- a/package/qt5/qt5scxml/qt5scxml.hash > +++ b/package/qt5/qt5scxml/qt5scxml.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 5fc3e6166ab3588242864c5d8f18235a45f5c3396482ccfeb8590fe67d0cd549 qtscxml-dcbd73cf3e8a07dbfa249d7db2257caafa83781b.tar.bz2 > +sha256 a0113f54d9df14ebae15dd85530f87f093a284372ee8237d1ccceb02e6a4607b qtscxml-631fd7bcc34802b7650c2b1dc73691463954d982.tar.bz2 > > # Hashes for license files: > sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT > diff --git a/package/qt5/qt5scxml/qt5scxml.mk b/package/qt5/qt5scxml/qt5scxml.mk > index af18b84e9d..f6ccb9298e 100644 > --- a/package/qt5/qt5scxml/qt5scxml.mk > +++ b/package/qt5/qt5scxml/qt5scxml.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SCXML_VERSION = dcbd73cf3e8a07dbfa249d7db2257caafa83781b > +QT5SCXML_VERSION = 631fd7bcc34802b7650c2b1dc73691463954d982 > QT5SCXML_SITE = $(QT5_SITE)/qtscxml/-/archive/$(QT5SCXML_VERSION) > QT5SCXML_SOURCE = qtscxml-$(QT5SCXML_VERSION).tar.bz2 > QT5SCXML_DEPENDENCIES = qt5declarative > diff --git a/package/qt5/qt5sensors/qt5sensors.hash b/package/qt5/qt5sensors/qt5sensors.hash > index 559f02e7f6..d43fa8ba65 100644 > --- a/package/qt5/qt5sensors/qt5sensors.hash > +++ b/package/qt5/qt5sensors/qt5sensors.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fa0ffba89fed2086d06dab84074cdd789acbfb89da6f64c40a64fc3bc067832e qtsensors-1ab8d6c7257f9ec060739b648704be1cf1c16b05.tar.bz2 > +sha256 8325826a259189fc7dea66651df4022a92a73664e953f86bce5bf5946ebacdf5 qtsensors-35eb5ac7eaef4745a38958c3ca780d7baa2e4f30.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5sensors/qt5sensors.mk b/package/qt5/qt5sensors/qt5sensors.mk > index 299fab3db0..40bb72e038 100644 > --- a/package/qt5/qt5sensors/qt5sensors.mk > +++ b/package/qt5/qt5sensors/qt5sensors.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SENSORS_VERSION = 1ab8d6c7257f9ec060739b648704be1cf1c16b05 > +QT5SENSORS_VERSION = 35eb5ac7eaef4745a38958c3ca780d7baa2e4f30 > QT5SENSORS_SITE = $(QT5_SITE)/qtsensors/-/archive/$(QT5SENSORS_VERSION) > QT5SENSORS_SOURCE = qtsensors-$(QT5SENSORS_VERSION).tar.bz2 > QT5SENSORS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5serialbus/qt5serialbus.hash b/package/qt5/qt5serialbus/qt5serialbus.hash > index b8f96cf0c0..01ffd7c215 100644 > --- a/package/qt5/qt5serialbus/qt5serialbus.hash > +++ b/package/qt5/qt5serialbus/qt5serialbus.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 caaccfdabdf502c3aacf9fa842ed31ed7682cab6ada69b06be1ba49273fb1f1c qtserialbus-e34053fbda8d687e3dc294fbd5e3a88bf94a7a66.tar.bz2 > +sha256 fe08415d2348797429dc09722478630ceee3d7477652a2712460e79127b7291b qtserialbus-f9f7eee60adac72fcf6617d164e3bf61222bb5c5.tar.bz2 > > # Hashes for license files: > sha256 edfe70e99be2a7c109d860b19204609e582720b211c50caedac729da372a1253 LICENSE.GPLv2 > diff --git a/package/qt5/qt5serialbus/qt5serialbus.mk b/package/qt5/qt5serialbus/qt5serialbus.mk > index 70f23ce407..c718414932 100644 > --- a/package/qt5/qt5serialbus/qt5serialbus.mk > +++ b/package/qt5/qt5serialbus/qt5serialbus.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SERIALBUS_VERSION = e34053fbda8d687e3dc294fbd5e3a88bf94a7a66 > +QT5SERIALBUS_VERSION = f9f7eee60adac72fcf6617d164e3bf61222bb5c5 > QT5SERIALBUS_SITE = $(QT5_SITE)/qtserialbus/-/archive/$(QT5SERIALBUS_VERSION) > QT5SERIALBUS_SOURCE = qtserialbus-$(QT5SERIALBUS_VERSION).tar.bz2 > QT5SERIALBUS_DEPENDENCIES = qt5serialport > diff --git a/package/qt5/qt5serialport/qt5serialport.hash b/package/qt5/qt5serialport/qt5serialport.hash > index d25b2193e7..58461430c7 100644 > --- a/package/qt5/qt5serialport/qt5serialport.hash > +++ b/package/qt5/qt5serialport/qt5serialport.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 83abb0c5b9c435a031abf1a36d6d44f8e3f5e2fc16150bdc78c6d33b25386bb6 qtserialport-191e67e428522a0e2e1e8d2f3440607a9760d441.tar.bz2 > +sha256 6d49d0da174632f51291b0190f6f1db2397a3b339cf293514252766f8a20c63b qtserialport-c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5serialport/qt5serialport.mk b/package/qt5/qt5serialport/qt5serialport.mk > index cd96df2007..7d00bd2ab7 100644 > --- a/package/qt5/qt5serialport/qt5serialport.mk > +++ b/package/qt5/qt5serialport/qt5serialport.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SERIALPORT_VERSION = 191e67e428522a0e2e1e8d2f3440607a9760d441 > +QT5SERIALPORT_VERSION = c9abfcd5d88cb43c2a7c1d5ddecbff4cdd320694 > QT5SERIALPORT_SITE = $(QT5_SITE)/qtserialport/-/archive/$(QT5SERIALPORT_VERSION) > QT5SERIALPORT_SOURCE = qtserialport-$(QT5SERIALPORT_VERSION).tar.bz2 > QT5SERIALPORT_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5svg/qt5svg.hash b/package/qt5/qt5svg/qt5svg.hash > index 424891ac2c..4816206d64 100644 > --- a/package/qt5/qt5svg/qt5svg.hash > +++ b/package/qt5/qt5svg/qt5svg.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 eeb4175f0b2c3299abf0ca9d751886612dad5ecd212c954f9801b28b4696f4f7 qtsvg-23b8cf7d833c335d7735855570c05e9e0893a9b7.tar.bz2 > +sha256 063ee53515b934c00a65838fe8521142e4a9161b07c8e19b5bb0ea26a0ce9ab3 qtsvg-a9752b00a03438de8e5b080073816e12409404b7.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5svg/qt5svg.mk b/package/qt5/qt5svg/qt5svg.mk > index 3072fd7a18..2a39ed18fe 100644 > --- a/package/qt5/qt5svg/qt5svg.mk > +++ b/package/qt5/qt5svg/qt5svg.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5SVG_VERSION = 23b8cf7d833c335d7735855570c05e9e0893a9b7 > +QT5SVG_VERSION = a9752b00a03438de8e5b080073816e12409404b7 > QT5SVG_SITE = $(QT5_SITE)/qtsvg/-/archive/$(QT5SVG_VERSION) > QT5SVG_SOURCE = qtsvg-$(QT5SVG_VERSION).tar.bz2 > QT5SVG_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5tools/qt5tools.hash b/package/qt5/qt5tools/qt5tools.hash > index 58ed752b9b..d603598257 100644 > --- a/package/qt5/qt5tools/qt5tools.hash > +++ b/package/qt5/qt5tools/qt5tools.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 76052a183a41fcddfd4446ffba6a99c3e77a21453fe629cf67379ffa617a0d53 qttools-53ee43a51b5a3de2877dafffc78e71ff55926708.tar.bz2 > +sha256 b6eebbd61dcde981d63ce6de39b3c957bad8f11b0140585ba4d57d166c4dd79d qttools-32912a06aadfc3dcbc34e0a668ce2c78351eee6e.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5tools/qt5tools.mk b/package/qt5/qt5tools/qt5tools.mk > index e87c9b50a5..a01a336584 100644 > --- a/package/qt5/qt5tools/qt5tools.mk > +++ b/package/qt5/qt5tools/qt5tools.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5TOOLS_VERSION = 53ee43a51b5a3de2877dafffc78e71ff55926708 > +QT5TOOLS_VERSION = 32912a06aadfc3dcbc34e0a668ce2c78351eee6e > QT5TOOLS_SITE = $(QT5_SITE)/qttools/-/archive/$(QT5TOOLS_VERSION) > QT5TOOLS_SOURCE = qttools-$(QT5TOOLS_VERSION).tar.bz2 > > diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > index 1cdd8f0386..60d51fa5fe 100644 > --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 6ef14ba8bb5eb287320b6c0d6e61c5c2916a94ef754bb8a2d89c123043485d67 qtvirtualkeyboard-e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db.tar.bz2 > +sha256 e1e356e81f3a3fb5da6f6739aa475c15aab15090e202de6704441a3bf41c335b qtvirtualkeyboard-9fbb837b55887bec5d73fad142c853ef68db35b3.tar.bz2 > > # Hashes for license files: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 > diff --git a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > index c31d455c4e..067db80330 100644 > --- a/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > +++ b/package/qt5/qt5virtualkeyboard/qt5virtualkeyboard.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5VIRTUALKEYBOARD_VERSION = e8ae4757dd32e8dbf69a7c57f2bc5c1e238416db > +QT5VIRTUALKEYBOARD_VERSION = 9fbb837b55887bec5d73fad142c853ef68db35b3 > QT5VIRTUALKEYBOARD_SITE = $(QT5_SITE)/qtvirtualkeyboard/-/archive/$(QT5VIRTUALKEYBOARD_VERSION) > QT5VIRTUALKEYBOARD_SOURCE = qtvirtualkeyboard-$(QT5VIRTUALKEYBOARD_VERSION).tar.bz2 > QT5VIRTUALKEYBOARD_DEPENDENCIES = qt5declarative qt5svg > diff --git a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch b/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > deleted file mode 100644 > index adad3768b2..0000000000 > --- a/package/qt5/qt5wayland/0001-Add-missing-define-guards.patch > +++ /dev/null > @@ -1,35 +0,0 @@ > -From 05658e127dedfff65789860415537c6920ec574d Mon Sep 17 00:00:00 2001 > -From: Samuli Piippo > -Date: Thu, 22 Apr 2021 15:29:56 +0300 > -Subject: [PATCH] Add missing define guards > - > -Ammend cca1b94190a094b5d1d7ce492b6533e2d330c5e8 to use m_composeState > -only if xcbcommon is available. > - > -Pick-to: 5.15 > -Change-Id: I48332b15def3282c5bda3e1c7c393ea7e9849cbe > -Reviewed-by: Aleix Pol Gonzalez > -[Backported from: 05658e127dedfff65789860415537c6920ec574d] > -Signed-off-by: Quentin Schulz > ---- > - src/client/qwaylandinputcontext.cpp | 2 ++ > - 1 file changed, 2 insertions(+) > - > -diff --git a/src/client/qwaylandinputcontext.cpp b/src/client/qwaylandinputcontext.cpp > -index 16e03ea1..cbf63cde 100644 > ---- a/src/client/qwaylandinputcontext.cpp > -+++ b/src/client/qwaylandinputcontext.cpp > -@@ -408,8 +408,10 @@ bool QWaylandInputContext::isValid() const > - void QWaylandInputContext::reset() > - { > - qCDebug(qLcQpaInputMethods) << Q_FUNC_INFO; > -+#if QT_CONFIG(xkbcommon) > - if (m_composeState) > - xkb_compose_state_reset(m_composeState); > -+#endif > - > - QPlatformInputContext::reset(); > - > --- > -2.35.1 > - > diff --git a/package/qt5/qt5wayland/qt5wayland.hash b/package/qt5/qt5wayland/qt5wayland.hash > index 58935ceadc..c9d7f3434c 100644 > --- a/package/qt5/qt5wayland/qt5wayland.hash > +++ b/package/qt5/qt5wayland/qt5wayland.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 bfe9bce353c036356dc7bca04e634f03c7c924381062ce89627a88df0ae7484e qtwayland-36659e6130ed3fc2b3f0c91423408ef5ecb7b991.tar.bz2 > +sha256 c881745403a7c3639ee928f64ac9e7252d7a941cb62ef682a7ee83ccf3ae0a60 qtwayland-8faf74a7966b520f0ac3eb4d88235f8ec63b31b8.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5wayland/qt5wayland.mk b/package/qt5/qt5wayland/qt5wayland.mk > index 63fa1f21c0..aeca1b0381 100644 > --- a/package/qt5/qt5wayland/qt5wayland.mk > +++ b/package/qt5/qt5wayland/qt5wayland.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5WAYLAND_VERSION = 36659e6130ed3fc2b3f0c91423408ef5ecb7b991 > +QT5WAYLAND_VERSION = 8faf74a7966b520f0ac3eb4d88235f8ec63b31b8 > QT5WAYLAND_SITE = $(QT5_SITE)/qtwayland/-/archive/$(QT5WAYLAND_VERSION) > QT5WAYLAND_SOURCE = qtwayland-$(QT5WAYLAND_VERSION).tar.bz2 > QT5WAYLAND_DEPENDENCIES = wayland > diff --git a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > index dff3e6c849..aeec4c58b1 100644 > --- a/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > +++ b/package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch > @@ -28,24 +28,25 @@ linking statically by default. > [1] https://github.com/qt/qtwebengine-chromium/commit/cfab9198a9917f42cf08b1caf84ab9b71aac1911#diff-905c8f054808213577c0a92d1b704615 > > Signed-off-by: Romain Naour > +Signed-off-by: Giulio Benetti > +[Giulio: rebased to qt5.15.10] > --- > src/buildtools/gn.pro | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/src/buildtools/gn.pro b/src/buildtools/gn.pro > -index 033202e6..5dd8e241 100644 > +index f94694da0..19079a5b3 100644 > --- a/src/buildtools/gn.pro > +++ b/src/buildtools/gn.pro > @@ -20,7 +20,8 @@ build_pass|!debug_and_release { > - > + > gn_gen_args = --no-last-commit-position --out-path $$out_path \ > --cc \"$$which($$QMAKE_CC)\" --cxx \"$$which($$QMAKE_CXX)\" \ > - --ld \"$$which($$QMAKE_LINK)\" > + --ld \"$$which($$QMAKE_LINK)\" \ > + --no-static-libstdc++ > - > - msvc:!clang_cl: gn_gen_args += --use-lto > - > --- > -2.25.4 > + !isEmpty(QMAKE_AR): gn_gen_args += --ar \"$$which($$first(QMAKE_AR))\" > > + msvc:!clang_cl: gn_gen_args += --use-lto > +-- > +2.34.1 > diff --git a/package/qt5/qt5webengine/qt5webengine.hash b/package/qt5/qt5webengine/qt5webengine.hash > index 1d2b70c4f6..038446a9f4 100644 > --- a/package/qt5/qt5webengine/qt5webengine.hash > +++ b/package/qt5/qt5webengine/qt5webengine.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 fb7abcf88d4336d55565627e18b33df1855fefb0f12e24931b6a7decbe60913b qtwebengine-v5.15.8-lts.tar.bz2 > +sha256 4a3456df42e1c1b859232b3ee1d58360e629d55daf6e5ad308871142c1b0c2fa qtwebengine-v5.15.10-lts.tar.bz2 > > # Locally calculated > sha256 f34787ef0342c614b667186a6ec2f5d6b9d650e30142a2788a589a89743e88e9 LICENSE.Chromium > diff --git a/package/qt5/qt5webview/qt5webview.mk b/package/qt5/qt5webview/qt5webview.mk > index 54da733e7b..a55fd8ae74 100644 > --- a/package/qt5/qt5webview/qt5webview.mk > +++ b/package/qt5/qt5webview/qt5webview.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5WEBVIEW_VERSION = 826d2a33929c69807917536d48b7861e7682001e > +QT5WEBVIEW_VERSION = 87577dde04ed219bda776dabca86176149736331 > QT5WEBVIEW_SITE = $(QT5_SITE)/qtwebview/-/archive/$(QT5WEBVIEW_VERSION) > QT5WEBVIEW_SOURCE = qtwebview-$(QT5WEBVIEW_VERSION).tar.bz2 > QT5WEBVIEW_DEPENDENCIES = qt5webengine > diff --git a/package/qt5/qt5x11extras/qt5x11extras.mk b/package/qt5/qt5x11extras/qt5x11extras.mk > index fb6650e84a..80c5498518 100644 > --- a/package/qt5/qt5x11extras/qt5x11extras.mk > +++ b/package/qt5/qt5x11extras/qt5x11extras.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5X11EXTRAS_VERSION = 51b0a5a2e3e35f4cb17da1e7cb4babef6294bfb4 > +QT5X11EXTRAS_VERSION = 982f20eb585d77e5b5c721e05a466d7161f7f2d1 > QT5X11EXTRAS_SITE = $(QT5_SITE)/qtx11extras/-/archive/$(QT5X11EXTRAS_VERSION) > QT5X11EXTRAS_SOURCE = qtx11extras-$(QT5X11EXTRAS_VERSION).tar.bz2 > QT5X11EXTRAS_INSTALL_STAGING = YES > diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > index a1dbb40154..353dfc8485 100644 > --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.hash > @@ -1,5 +1,5 @@ > # Locally calculated > -sha256 6243e6334c0d1467e3e5bdecd981d7e673f4cc99cf2cee3b99597be4218a4bd2 qtxmlpatterns-dfcae10dec8c1c2c544ad0cd303cea113b0af51d.tar.bz2 > +sha256 067b801049f6fada8e7ebcfbce0530db6217a1a94b8ed34c99c530be4129889d qtxmlpatterns-30e6c84fe2752cde8b53aff9d38c2095cd7c8761.tar.bz2 > > # Hashes for license files: > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 > diff --git a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > index 6711e9bf70..803c36cf04 100644 > --- a/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > +++ b/package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QT5XMLPATTERNS_VERSION = dfcae10dec8c1c2c544ad0cd303cea113b0af51d > +QT5XMLPATTERNS_VERSION = 30e6c84fe2752cde8b53aff9d38c2095cd7c8761 > QT5XMLPATTERNS_SITE = $(QT5_SITE)/qtxmlpatterns/-/archive/$(QT5XMLPATTERNS_VERSION) > QT5XMLPATTERNS_SOURCE = qtxmlpatterns-$(QT5XMLPATTERNS_VERSION).tar.bz2 > QT5XMLPATTERNS_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Wed Oct 12 20:23:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:23:16 +0200 Subject: [Buildroot] [PATCH 1/2] package/lttng-modules: enable CONFIG_FTRACE in kernel configuration Message-ID: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> The build of lttng-modules will fail if the kernel does not have CONFIG_TRACEPOINTS enabled. However, CONFIG_TRACEPOINTS is a prompt-less option, and the most generic option that does enable CONFIG_TRACEPOINTS is CONFIG_FTRACE. In addition, CONFIG_FTRACE will also enable CONFIG_STACKTRACE, which is needed on CPU architectures that don't provide the STACKWALK mechanism in the kernel, as is the case on ARM 32-bit for example. Therefore, let's enable CONFIG_FTRACE when building lttng-modules. Cc: Cl?ment L?ger Reported-by: Cl?ment L?ger Signed-off-by: Thomas Petazzoni --- package/lttng-modules/lttng-modules.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/lttng-modules/lttng-modules.mk b/package/lttng-modules/lttng-modules.mk index d527bc19ef..97cda53f08 100644 --- a/package/lttng-modules/lttng-modules.mk +++ b/package/lttng-modules/lttng-modules.mk @@ -14,6 +14,7 @@ LTTNG_MODULES_MODULE_MAKE_OPTS = CONFIG_LTTNG=m CONFIG_LTTNG_CLOCK_PLUGIN_TEST=m define LTTNG_MODULES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) endef $(eval $(kernel-module)) -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 12 20:23:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:23:17 +0200 Subject: [Buildroot] [PATCH 2/2] package/lttng-modules: bump to 2.13.7 In-Reply-To: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> References: <20221012202317.2898868-1-thomas.petazzoni@bootlin.com> Message-ID: <20221012202317.2898868-2-thomas.petazzoni@bootlin.com> This is the latest point release in the stable 2.13 branch (currently the latest stable branch available). Cc: Cl?ment L?ger Reported-by: Cl?ment L?ger Signed-off-by: Thomas Petazzoni --- package/lttng-modules/lttng-modules.hash | 4 ++-- package/lttng-modules/lttng-modules.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lttng-modules/lttng-modules.hash b/package/lttng-modules/lttng-modules.hash index fb253c9bf6..e685cc3367 100644 --- a/package/lttng-modules/lttng-modules.hash +++ b/package/lttng-modules/lttng-modules.hash @@ -1,5 +1,5 @@ -# From https://lttng.org/files/lttng-modules/lttng-modules-2.13.1.tar.bz2.sha256 -sha256 a7c86d91c9bbe66d27f025aa04b8cfc6d7785ed2fc7ef774930800ee44d7f343 lttng-modules-2.13.1.tar.bz2 +# From https://lttng.org/files/lttng-modules/lttng-modules-2.13.7.tar.bz2.sha256 +sha256 5a99679df7903160cbde3918fee5af90ffafc90fc96ccdefaa57cf230492b234 lttng-modules-2.13.7.tar.bz2 # Hash for license files sha256 d72921266bc8452a8789f8a04a82755373990d00b7e0b0f1a8edb8f854e94d1c LICENSES/LGPL-2.1 diff --git a/package/lttng-modules/lttng-modules.mk b/package/lttng-modules/lttng-modules.mk index 97cda53f08..416833f4ef 100644 --- a/package/lttng-modules/lttng-modules.mk +++ b/package/lttng-modules/lttng-modules.mk @@ -4,7 +4,7 @@ # ################################################################################ -LTTNG_MODULES_VERSION = 2.13.1 +LTTNG_MODULES_VERSION = 2.13.7 LTTNG_MODULES_SITE = http://lttng.org/files/lttng-modules LTTNG_MODULES_SOURCE = lttng-modules-$(LTTNG_MODULES_VERSION).tar.bz2 LTTNG_MODULES_LICENSE = LGPL-2.1/GPL-2.0 (kernel modules), MIT (lib/bitfield.h, lib/prio_heap/*) -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 12 20:33:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:33:15 +0200 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221012175426.32367-1-neal.frager@amd.com> References: <20221012175426.32367-1-neal.frager@amd.com> Message-ID: <20221012223315.68f43720@windsurf> Hello, On Wed, 12 Oct 2022 11:54:26 -0600 Neal Frager via buildroot wrote: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > > It will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash. Details of the issue > can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Instead of using a pmufw binary built by the zynqmp-pmufw-builder, this patch > enables a pmufw binary built by petalinux to solve the issue. > > Signed-off-by: Neal Frager I think the whole commit log is a bit confusing. What this commit allows is to use a PMU FW as an ELF binary in addition to allowing to use a PMU FW provided as a raw binary. And indeed, this will allow using the PMU FW provided by Petalinux in addition to the ones of zynqmp-pmufw-builder, which is the motivation for the change. > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) Spaces around = sign. > + > +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) > +UBOOT_ZYNQMP_PMUFW_CONVERT=y Ditto. > +endif > + > define UBOOT_ZYNQMP_KCONFIG_PMUFW > - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") > + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), > + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) You could also write this like this: $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) and get rid of UBOOT_ZYNQMP_PMUFW_CONVERT entirely. I was wondering if the usage of objcopy was correct or whether $(TARGET_OBJCOPY) would be more correct. But in fact none of them is perfect I guess: the PMU FW is a Microblaze ELF binary, while $(TARGET_OBJCOPY) will be an ARM64 objcopy, and plain objcopy will be the machine native objcopy, very unlikely to be a Microblaze one :-) So overall, I guess using objcopy is fine here. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 12 20:40:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 22:40:08 +0200 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod In-Reply-To: <87edvdeseo.wl-me@linux.beauty> References: <87edvdeseo.wl-me@linux.beauty> Message-ID: <20221012224008.5dc7c7b6@windsurf> Hello, On Wed, 12 Oct 2022 09:34:39 +0800 Li Chen wrote: > Content-Transfer-Encoding: 8bit > > kmod install path is always /usr/bin/kmod instead > of /bin/kmod. > > So if we link modprobe/lsmod/... to /bin/kmod > > We will get error like: > > # modprobe > > -sh: modprobe: not found > > because it points to: > > # ls -liah /sbin/modprobe > > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod > > and kmod is under /usr/bin/kmod instead of /bin/kmod. > > Signed-off-by: Li Chen Are you testing a BR2_ROOTFS_MERGED_USR enabled or a BR2_ROOTFS_MERGED_USR disabled configuration? If you're testing a BR2_ROOTFS_MERGED_USR enabled configuration, then the "modprobe" symlink, even if created in /sbin is in fact in /usr/sbin, because /sbin is a symlink to /usr/sbin. So actually the symlink is /usr/sbin/modprobe -> ../bin/kmod, which is correct as kmod is indeed in /usr/bin/kmod. If you're testing a BR2_ROOTFS_MERGED_USR disabled configuration, then the "modprobe" symlink is really in /sbin, and /sbin/modprobe is a symlink to ../usr/bin/kmod, which is correct. (Of course, I didn't do a test, so maybe my reasoning is wrong, but the current logic appears correct at first sight). Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From leo at yuriev.ru Wed Oct 12 20:42:46 2022 From: leo at yuriev.ru (=?UTF-8?q?=D0=9B=D0=B5=D0=BE=D0=BD=D0=B8=D0=B4=20=D0=AE=D1=80=D1=8C=D0=B5=D0=B2=20=28Leonid=20Yuriev=29?=) Date: Wed, 12 Oct 2022 23:42:46 +0300 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 Message-ID: <20221012204246.904703-1-leo@yuriev.ru> This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ?????? ????? (Leonid Yuriev) --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 12 21:50:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 12 Oct 2022 23:50:08 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility Message-ID: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Y2038 is now almost only 15 years away, and embedded systems built today are potentially going to still be operational in 15 years, and even though they are supposed to receive updates by then, we all know how things go, and potentially some of these embedded systems will not receive any update. In 2038, the signed 32-bit representation of time_t used on 32-bit architectures will overflow, causing all time-related functions to go back in time in a surprising way. The Linux kernel has already been modified to support a 64-bit representation of time_t on 32-bit architectures, but from a C library perspective, the situation varies: - glibc uses this 64-bit time_t representation on 32-bit systems since glibc 2.34, but only if -D_TIME_BITS=64 is specified. Therefore, this commit adds an option to add this flag globally to the build, when glibc is the C library and the architecture is not 64-bit. - musl uses unconditionally a 64-bit time_t representation on 32-bit systems since musl 1.2.0. So there is nothing to do here since Buildroot has been using a musl >= 1.2.0, used since Buildroot 2020.05. No Buildroot option is needed here. - uClibc-ng does not support a 64-bit time_t representation on 32-bit systems, so systems using uClibc-ng will not be Y2038 compliant, at least for now. No Buildroot option is needed here. It should be noted that being Y2038-compliant will only work if all application/library code is correct. For example if an application/library stores a timestamp in an "int" instead of using the proper time_t type, then the mechanisms described above will not fix this, and the application/library will continue to be broken in terms of Y2038 support. Possible discussions points about this patch: - Should we have an option at all, or should we unconditionally pass -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 for quite some time. The reasoning for having an option is that the mechanism is itself opt-in in glibc, and generally relatively new, so it seemed logical for now to make it optional as well in Buildroot. - Should we show something (a Config.in comment?) in the musl and uClibc-ng case to let the user know that the code is Y2038 compliant (musl) or not Y2038 compliant (uClibc-ng). Or should this discussion be part of the Buildroot documentation? Signed-off-by: Thomas Petazzoni --- Config.in | 16 ++++++++++++++++ package/Makefile.in | 3 +++ 2 files changed, 19 insertions(+) diff --git a/Config.in b/Config.in index 3c57c591a8..46c80fe2f0 100644 --- a/Config.in +++ b/Config.in @@ -753,6 +753,22 @@ config BR2_PER_PACKAGE_DIRECTORIES endmenu +config BR2_TIME_BITS_64 + bool "Build Y2038-ready code" + depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64 + help + This option will pass -D_TIME_BITS=64 in the compiler flags + to ensure the glibc C library uses a 64-bit representation + for time_t and other time types, which ensures that + programs/libraries will correctly handle time past year + 2038. + + Notes: + - This option only has an effect with glibc >= 2.34. + - The musl C library since its version 1.20 is + unconditionally Y2038 compliant. + - The uClibc-ng library is not Y2038 compliant. + comment "Security Hardening Options" config BR2_PIC_PIE_ARCH_SUPPORTS diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..59d88bb97e 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -163,6 +163,9 @@ TARGET_HARDENED += -D_FORTIFY_SOURCE=2 endif TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 +ifeq ($(BR2_TIME_BITS_64),y) +TARGET_CPPFLAGS += -D_TIME_BITS=64 +endif TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED) TARGET_CXXFLAGS = $(TARGET_CFLAGS) TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) -- 2.37.3 From robert.hancock at calian.com Wed Oct 12 23:49:37 2022 From: robert.hancock at calian.com (Robert Hancock) Date: Wed, 12 Oct 2022 23:49:37 +0000 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Message-ID: <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> On Wed, 2022-10-12 at 23:50 +0200, Thomas Petazzoni via buildroot wrote: > Y2038 is now almost only 15 years away, and embedded systems built > today are potentially going to still be operational in 15 years, and > even though they are supposed to receive updates by then, we all know > how things go, and potentially some of these embedded systems will > not > receive any update. > > In 2038, the signed 32-bit representation of time_t used on 32-bit > architectures will overflow, causing all time-related functions to go > back in time in a surprising way. > > The Linux kernel has already been modified to support a 64-bit > representation of time_t on 32-bit architectures, but from a C > library > perspective, the situation varies: > > ?- glibc uses this 64-bit time_t representation on 32-bit systems > ?? since glibc 2.34, but only if -D_TIME_BITS=64 is > ?? specified. Therefore, this commit adds an option to add this flag > ?? globally to the build, when glibc is the C library and the > ?? architecture is not 64-bit. > > ?- musl uses unconditionally a 64-bit time_t representation on 32-bit > ?? systems since musl 1.2.0. So there is nothing to do here since > ?? Buildroot has been using a musl >= 1.2.0, used since Buildroot > ?? 2020.05. No Buildroot option is needed here. > > ?- uClibc-ng does not support a 64-bit time_t representation on 32- > bit > ?? systems, so systems using uClibc-ng will not be Y2038 compliant, > at > ?? least for now. No Buildroot option is needed here. > > It should be noted that being Y2038-compliant will only work if all > application/library code is correct. For example if an > application/library stores a timestamp in an "int" instead of using > the proper time_t type, then the mechanisms described above will not > fix this, and the application/library will continue to be broken in > terms of Y2038 support. > > Possible discussions points about this patch: > > ?- Should we have an option at all, or should we unconditionally pass > ?? -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 > ?? for quite some time. The reasoning for having an option is that > ?? the mechanism is itself opt-in in glibc, and generally relatively > ?? new, so it seemed logical for now to make it optional as well in > ?? Buildroot. There's some chance of software being broken by enabling this, with either a compile or runtime failure. For example, applications that assume sizeof(time_t) == sizeof(long) would work on 32-bit platforms with a 32-bit time and 64-bit platforms with a 64-bit time, but fail with a 64-bit time on 32-bit. I believe I've seen this when trying to build software with that option, so turning this on unconditionally might be unwise, unless some build tests of the supported packages have been done.. > > ?- Should we show something (a Config.in comment?) in the musl and > ?? uClibc-ng case to let the user know that the code is Y2038 > ?? compliant (musl) or not Y2038 compliant (uClibc-ng). Or should > this > ?? discussion be part of the Buildroot documentation? > > Signed-off-by: Thomas Petazzoni > --- > ?Config.in?????????? | 16 ++++++++++++++++ > ?package/Makefile.in |? 3 +++ > ?2 files changed, 19 insertions(+) > > diff --git a/Config.in b/Config.in > index 3c57c591a8..46c80fe2f0 100644 > --- a/Config.in > +++ b/Config.in > @@ -753,6 +753,22 @@ config BR2_PER_PACKAGE_DIRECTORIES > ? > ?endmenu > ? > +config BR2_TIME_BITS_64 > +???????bool "Build Y2038-ready code" > +???????depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64 > +???????help > +???????? This option will pass -D_TIME_BITS=64 in the compiler flags > +???????? to ensure the glibc C library uses a 64-bit representation > +???????? for time_t and other time types, which ensures that > +???????? programs/libraries will correctly handle time past year > +???????? 2038. > + > +???????? Notes: > +?????????? - This option only has an effect with glibc >= 2.34. > +?????????? - The musl C library since its version 1.20 is > +???????????? unconditionally Y2038 compliant. > +?????????? - The uClibc-ng library is not Y2038 compliant. > + > ?comment "Security Hardening Options" > ? > ?config BR2_PIC_PIE_ARCH_SUPPORTS > diff --git a/package/Makefile.in b/package/Makefile.in > index 43d214bcbe..59d88bb97e 100644 > --- a/package/Makefile.in > +++ b/package/Makefile.in > @@ -163,6 +163,9 @@ TARGET_HARDENED += -D_FORTIFY_SOURCE=2 > ?endif > ? > ?TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE - > D_FILE_OFFSET_BITS=64 > +ifeq ($(BR2_TIME_BITS_64),y) > +TARGET_CPPFLAGS += -D_TIME_BITS=64 > +endif > ?TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) > $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED) > ?TARGET_CXXFLAGS = $(TARGET_CFLAGS) > ?TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) > $(TARGET_DEBUGGING) -- Robert Hancock Senior Hardware Designer, Calian Advanced Technologies www.calian.com From damien.lemoal at opensource.wdc.com Thu Oct 13 04:16:16 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 13:16:16 +0900 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y -- 2.37.3 From thomas.petazzoni at bootlin.com Thu Oct 13 05:43:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 05:43:20 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-12 Message-ID: <20221013054327.8FBA140C3D@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-12 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 4 | 2 | 0 | 6 | 2022.08.x | 21 | 15 | 0 | 36 | master | 92 | 812 | 7 | 911 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 351 ca-certificates-20211016 | 36 host-gcc-initial-11.3.0 | 29 berkeleydb-5.3.28 | 26 bearssl-0.6 | 23 crun-1.5 | 19 host-f2fs-tools-1.15.0 | 19 host-binutils-2.38 | 15 slang-2.3.2 | 13 libnss-3.83 | 10 libglib2-2.72.3 | 9 autofs-5.1.8 | 8 coremark-pro-1.1.2743 | 8 host-gcc-final-11.3.0 | 8 brltty | 7 host-sentry-cli-1.59.0 | 7 sdl-1.2.15 | 7 dieharder-3.31.1 | 6 fbset-2.1 | 6 host-rust-1.64.0 | 6 sysvinit-2.99 | 6 efivar-38 | 5 gerbera-1.10.0 | 5 host-gcc-initial-12.2.0 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 5 linux-6.0 | 5 systemd-250.4 | 5 btrfs-progs-5.16.2 | 4 duma-2.5.15 | 4 host-gauche-0.9.12 | 4 libee-0.4.1 | 4 linux-5.10.145-cip17-rt7 | 4 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 flite-2.2 | 3 frotz-2.54 | 3 gensio-2.5.5 | 3 host-berkeleydb-5.3.28 | 3 host-binutils-2.37 | 3 host-gcc-initial-10.4.0 | 3 host-riscv-isa-sim-1.1.0 | 3 igd2-for-linux-2.1 | 3 libarchive-3.6.1 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musepack-r475 | 3 perl-5.34.1 | 3 bat-0.19.0 | 2 dahdi-linux-5c840cf43838e06... | 2 exempi-2.6.1 | 2 f2fs-tools-1.15.0 | 2 fontconfig-2.13.1 | 2 gpm-1.20.7 | 2 hdparm-9.63 | 2 host-binutils-2.39 | 2 host-gcc-final-12.2.0 | 2 host-gdb-arc-2020.09-releas... | 2 host-protobuf-c-1.4.1 | 2 lcdproc-0.5.9 | 2 libcap-ng-0.8.3 | 2 libcurl-7.84.0 | 2 netsurf-3.10 | 2 openpgm-5-3-128 | 2 toolchain-external-codescap... | 2 tstools-08f6be304040e7b8476... | 2 uclibc-1.0.42 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 ace-7.0.6 | 1 alsa-lib-1.2.7.2 | 1 assimp-5.2.5 | 1 asterisk-16.25.2 | 1 boost-1.80.0 | 1 brltty-6.5 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 dash-0.5.11.5 | 1 dhcp-4.4.3 | 1 edk2-edk2-stable202102 | 1 freeradius-server-3.2.0 | 1 freeswitch-1.10.7 | 1 frr-8.3.1 | 1 gauche-0.9.12 | 1 gdal-3.5.1 | 1 gitlab-runner-14.5.1 | 1 gmp-6.2.1 | 1 gmrender-resurrect-0.0.9 | 1 gobject-introspection-1.72.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-vde2-2.3.2 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libqb-2.0.6 | 1 libsodium-1.0.18 | 1 lighttpd-1.4.67 | 1 lttng-modules-2.13.1 | 1 lxc-4.0.12 | 1 make: *** Waiting for unfin... | 1 mariadb-10.3.36 | 1 mimic-1.1.0 | 1 mongodb-4.2.18 | 1 musl-1.2.3 | 1 ncurses-6.1 | 1 openssh-9.0p1 | 1 openswan-3.0.0 | 1 openvmtools-11.3.5-18557794 | 1 package/qt6/qt6base/qt6base... | 1 pcsc-lite-1.9.8 | 1 perl-net-ssleay-1.85 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 poppler-21.12.0 | 1 python-pycryptodomex-3.15.0 | 1 qt6base-6.4.0 | 1 refpolicy-2.20220106 | 1 sconeserver-8d1935919a20133... | 1 toolchain-external-codescap... | 1 trace-cmd-2.9.7 | 1 traceroute-2.1.0 | 1 uccp420wlan-6.9.1 | 1 ulog-0389d243352255f6182326... | 1 valgrind-3.19.0 | 1 vde2-2.3.2 | 1 whois-5.5.13 | 1 wolfssl-5.5.1 | 1 xxhash-0.8.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b9a1754350d6a738926dfaeb862beb93e53f6662 | powerpc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f83d2788d4bb451b457e59cf9f26d6c24b3b4433 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/8e4090aaf1073a0766606f81c640cb2ac2b09948 | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/0cd387ddf55758990205aa9fea8b20a863a4687a | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1295f55793ae44741470872e198e6e93b630f287 | microblazeel | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/2e2b956867490b5c038bf605173c753c0158cc14 | aarch64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4d8b76708edb914c12907d8b54c953460635671d | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/8527f91a437981f9ed49060a0f6f2ae20cde533e | ORPH aarch64 | asterisk-16.25.2 | NOK | http://autobuild.buildroot.net/results/e577f3d8290a1d621ee554b04826cb37e7b3251f | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f0f2eceafbf2f443f04c3c4d47bc2aa5493f2d4a | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e4ec9277f523b3985ae5c6f70555a8636d9ddc38 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/87291d9281a1325367b35429607369807c93c264 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/55317448ce7118165857a0ee313cb1ba3660f14d | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6e782eb963e25f0d20900c515d1664bfe856c9a7 | or1k | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7eab6dc45363aa082bb8e0b39bbb7daa7b131158 | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3ad63f86158f5f843ed77c7ef685c438fdcdb7d3 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2b950f446a02f7099f5dfa73a6fa3a39f2b7a936 | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/ba64511dc3593e2004b87d3ca079486c3bd5ff4e | arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/a1a35c4de40372af536102b3aa6b8b1ddd5c7920 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7e2b0f354b980cc3444a37f50540966ff1bf70db | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ec12e9a0df4fba650269c2fd6a6c631a871b6830 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/80a2e29f7e411fda47a43ab50e3b33b60c9a7743 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a01a89c438373a1d2fd5da6d92d2ce9ef1cd551c | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f3283bf971f6c48ec40f31b37822090dcf222cfd | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/daaaeacfc56a48b1acd8f0b76bf890ccd58190ce | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3618fc4d77f23b42d38113a5b6664ee0a96ac6da | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8b079261f7e9aa5f9b80fab17cabbad0fceed0d5 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8aff1a14ed7549bca53341001b9355b5aeae2cff | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/36f1189a75145e51ad26aa2b0d93f5ae28dc5b46 | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2516faf3417b1a529d5a5fb11b96e0b6d14c34a2 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c1f0d7eeb746900e405f2ce5d57863fbec214567 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2f2eb2ae63d99b19a250cbd695be845a9af91c1 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/20d3ddf8a6d04a5b6d2ae1d54525bedaa0ad56e3 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/45b58059fc3252ba4d22977c9eeaccd6dbf3eeba | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2786e933828485542750b77ae1277c1d5e36a51d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/cc798773bbb93dd3f857e197e8c336056621638b | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3568faffc603427bddbef71625a7037257878edf | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a35712d16b59b9eba8787b851a9092938e21d780 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e07d9cd42f151405899ffe3b88f06b9f3ec5377c | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2dbf0bedc1c68c24957c41834214f875389b8f5 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e5d97fb61d7137b4f138820126c878928e89ab3f | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bd2e7e6f65bf42138ec60e29f2a2479b67b7c267 | mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6078922654675d401d986e565de6ac42938de0e9 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d099fb78365ae848d2deea4d391be7d094902624 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3e8f431ac6946169916e5934071857c434687851 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fc6b9c0113a103eaae664516abdee8bc81c54706 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d307eb51035e4b2e4d7dffb6407120f3c68db58c | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/71c276f41f88eadbc0a0936a8c76bf01a6e51930 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d715da011e743d4b05eee28187c430a849106169 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/42c36bcf5fca2adfcaa48defd540470969786dd4 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d6ca22e78ef43a1ef96de19927258eb8b18eb787 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/319fe08256cd8623330b3bb6db918dc89dfb47b0 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cc4722a8d745b495a0d2609df92fc9a36e9b6534 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/39c08b37c1c7c54a776917df9007dedaf2b82248 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/efaeafb26cd86a4eab4c0af7583e6afdadbba311 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e5ca0812314f95518d7cc75636e2b16166b26f30 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6b3158f72dbe9e4c2f632c6687d7bd033b08ab6 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bedc1b7bf74f26b24018f3bc2dfaa3a850f9c50e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f9e62a40777b9bb1e38c9ba1e00903106106284b | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/66fca6008604fa2ecff75ff955ae91b51efe0382 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6330e0e05ec987aed3f1d27414e819914d5556f | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3c49afcf04a2f07963b59c525628138afb147fc4 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e646f50b6a23692754508f0d4b1d82c397857b84 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/709e60cb973c42bd6da5df956fdcab6cc01b54c7 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6b8ee347ba537af3029bd04c590f62d90722cb81 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3dc67e4cf54e1f76c23dd6adcf09ec36da1ee760 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8c1b557f99720f95619f5fb45c982b2df73239de | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0941e976ab9ca8bd8d811f1ad8b252567e92bed7 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/77cba08e807c7d66882af23afddf19ce87b9025a | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/44f5f216f8428c0d346941fc751214fe2d9bbae6 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/2064a3987ecae989849e3bbc0f1fd8d9d4d598a4 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/3ecc7bb3ecdd2e65d62a14a2196d078262336de1 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/a1e89c6522f91b1abc761f085f3a2bbddbd660cf | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/6783fe6c9ba9ba23962b2d955419d8592a3297b3 | arm | brltty | TIM | http://autobuild.buildroot.net/results/b5671c1017a93fb2334d9e0564730af11408033d | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/c6c399629d690b3e4401d4a498591be1082bc892 | mipsel | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/07dc6309ae292ccff07f44b1013cd6af95582234 | sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a2ace987fc1440f67085f728e4923410e7dab968 | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ef85f9e4fcb4739e7b829c3d3d1dcc2cbbaccf4b | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/23eaeafb50c7bb36c48dc4dcefb6b539e9af1de6 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c85d8324d7ccdc98444c304a68aab5fc741aa742 | ORPH xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a0b552d30dd69d42e5518e34546c2e78fbd405a1 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/89b3b8d9610cd7f466ff0448eea2f3ea81bd1384 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e20228aed185021581e3b989ce21912e9d437543 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c2eeffa3ecb59a5d73e58462aa11d68842111867 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/74b507c0f29dfb48d565fb76fe23749ec3dc7fff | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/88dcb9eb12d291642964a71665cf6c05ae0dd1df | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ae48771dfef08dc6b5d401e1a9bf3417cf003cad | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c2e1faeb33ef0f18937994b543f0eb3e1d663dad | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aaef99c2d4108f00b1a4181ad07bb64a46a6e3e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8b7e7b4e619585c75b87468f5371e31c45eea971 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8f54c27c0c843711b0150626ff0b79637b261856 | sh4 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ba0d06fb0a2fef3c1621fc66222dc377604975f9 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e9f2a1afe6e00cb9fb5c3f869bdf4e9e50e1231a | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9bb756d31e24800e991f8dd53adf8f8909f991aa | sh4 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bd347a234e11797e5f1df8af979f92c5025a653f | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9e6ff5dd2ccd510254af3ba2a91e0a74880e1c60 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d6a908a6bca10b370b5c33ea871070efd36647db | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6341cf285b385a0490855e8612ee9ecb33942f5f | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/73ae9841ecf3a33928dc41d9feb25746017907b4 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22c4468fb03ef59766a3e44e4920f848de210a35 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e157391c57510bd3220492032ce88e86789a5712 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/10baf76634e0d7cded6e34b5947eeac05c66c8bd | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a222fd4dd4cc7e17fb0642098ebc48838d1557f3 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61930569f380d53635d7bfc9baa530372e0c9677 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c895c7d64d5209de48c3bb594ecb19070a8fab46 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3ad1d25aa1a4bf61da24426cd3a2b98c2f3a5be1 | i586 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/91900dad1f91b856ff1ed6864008c5ffe99c9c70 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ca9702467a51ae4c1791071fe2447b8d4655766f | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8976671e382866e956732a1322cfb912dde26f70 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d8473e4cfdacebc05f446040a174c834eeefc992 | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b2412604c7eb2115bf75ad35217fdbac504e22ad | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b45eb0c20f0b4f8a815b0034cb7a18c92635c4a2 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3feac65a2eaf46c628b75384ea35b568b1d43ea2 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0453bcbb055a8c026d958847c206ac6b0a755c20 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61e3023abbb708ebd8b69e60110fc5874fa333ae | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5236cd24b3776330853a132653aa95899ad1a737 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4e46ece0df42dd981d7590ebcf516964536c31e7 | sh4aeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1c61a91993bab4cd4e5fb8d59d9d82d1c785ffa9 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/73113d96aa53cfc36ff34233dd46f5a2f0feb195 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b237e1ef3fb41cb6bb4844a95d72f4ddc3353a94 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6dbcb307674984dc15d295cceac1c9fb37c5945e | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/73dc27aa1ec7d2b7abf270f98ef1b852b83275fd | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b265933d99ec48fc5d7246998c8cbbde335a63a | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2797efa8dbf2faa27b0ac53399cd5703dd9cfc85 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3646e95ae46fb71608353f8512f212195a245e2f | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3d76c0e067a78b04cbea8ca26097ad2db4297e4 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/21e762b2490bc143118bd8d6d7c417b714d2d9b6 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f1cc917cec3cf4102d89ea954abc56ddfdc4f593 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4fd5d2cdbd376d27fd2202a864e28c327f0b2920 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8a8a3e6bcd469c2e9b0f6747dcd5878df22f1177 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/19b972adaa3f49a957c04baa221be204c34efaf5 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/03eaf053e26d096d8a89998efe497ab17d486ca0 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/327faa77b787bb677b62cfe01040b4311b4190e7 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/36e8793f49ed6a028204635c4e62b0ab05d30396 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a3f196f0e0adff3d5bf9214f44f4e63b87b0aff | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9cfd7f6221fa8d2a8e1438b34341cccff7ac45cb | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/889776fdde4535f3c4fdef63b199ea4b6684df29 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0921a7fc5db266b90c8831bcb9d87cb111d03c7c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/799c2913497eb1266aaa2edab2e6751b6cc77be3 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9493aefda7edffbc94ab5c9f7e1b4058ce1d5753 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/970bf45ed705cef33570021c37d003a54b423dc4 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fbf3ed135e3231f09807b30133298f93a0a164ed | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a01da0f669599f22c0b6ee8f0c438de471550e9b | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/16c74337703fc08fd2a8c34e13acf96eab9ba7f2 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3e4d5adb4fba997cc5d5a1770ffe9c2107e24db2 | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/50067d9c5a2ccfa41d716ad97915081e9b77fbaa | m68k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8ce2099dc051418693af1446d0de2315bda1a545 | ORPH sh4 | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/094e11a1052f02c889c7f1bc700efec5ff4cc7a9 | ORPH arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/6f57fc5c99c02559af7ab807fbddb4356038cf14 | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e86d11aaec2cf1292c7876aee666843e80a9f3ef | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/eb8a0dc5ea835e668ff9011f2a3f3e651691ce7e | arm | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/df9fd443de77c61181d7789c7d1cb38d1d66240d | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0b19a1e6e55fcd6fc3be3ec7e2b910aff01429b3 | mips64el | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/bb294762171a1bfeff26e5f0486532eeaedd5d33 | microblaze | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/e0e5544bf7955c63545d929e3016af3f79d1e095 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/f8ff4bc5c543ee8de4bcd31080b3ec2dc981c462 | ORPH powerpc64le | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/2f73a51517fbed1019c1f11b486f042c195fb4d0 | ORPH m68k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/c5bf69fca64456f731dd62f84b5b609c16583730 | ORPH sh4 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/bf6317e53f70477c36c1148c781fcd228123f1e0 | ORPH or1k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/2dace93c1c61901f2caa9a9995f766f62c4f6e52 | ORPH aarch64 | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/050773e3be4dd6ca66599bb1bf870966588a7951 | ORPH aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/91fddff5c670f262e2aee8814d5ae8e53cce2a1b | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/e7945222a2ef5e631417eba879e0036b45d6f821 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/379a9245699fb37e216557b2051fe3d8ddffe7a6 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/803fc58b7cfe69423c4bc5eaf4bff93cae9a1100 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/d7c1a3785d1b867b87e7cb6938c7a8b3b1ce4fda | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/263bf66b68f5f56b7dccec86074ec12bdb8f516d | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8545de71d30d338988739fa1bc39649c2befe9fa | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/fc4382b7dcc8cd3b4a32ebccb9ab78539e3517b0 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/dcfdc79eab9e39405aa224498432e87e2340e594 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/ba2e5bb7106cd453cb5108f643fca909f8c7cd01 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/97ce169d33bc90befeebb5b6b29921c44d923d55 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/efaf0b70a101a7ed1af1dc13bb0a474e93ab9271 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2f66cfab4ac40c0e9822be1cbce230586e3c634a | arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b5e2a7318aa868b0a5e19b987c16bf93285fb377 | ORPH sh4eb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/6b165317069397a50d87b77afcd974775027de2e | ORPH m68k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/977448db4133b23c3ffd6b19a4c84f609242f332 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/28ded714119f94452f0ac33365a936baca77a5c1 | ORPH mipsel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/ffcacc171505c639e24692c39b383564b6f5d027 | ORPH arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/05084b3a50f91af4f0b4da92bba767f500aba315 | ORPH powerpc | flite-2.2 | NOK | http://autobuild.buildroot.net/results/89fe02f2c3c741dcb686fb91cf59a09bafb5d5ab | mips64el | flite-2.2 | NOK | http://autobuild.buildroot.net/results/103d2b8dc9a39895fbff6038533565aa002ae4f8 | powerpc64 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/14829c9002520eec33470bde6354637684f3a856 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/fd35e01d92cc0d69616ff5fb4285fd2b3b73148b | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/1eedffb8123623d68dabe775c8f704226d2151ca | ORPH armeb | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/6c20d612923f2279b03144cba9f6c7284aff8d73 | arm | freeswitch-1.10.7 | NOK | http://autobuild.buildroot.net/results/db9a070067c39539bb1ca7e8bba95e7243df6fd5 | arm | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6c6008596a24fd604336a9adcf57203d32f8bf8f | riscv64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/870382aaa79664e68d4bb28d286dd703e0cd6087 | arc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/363fd33d567c62a0a4f31993837005e66771c26c | xtensa | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/17728056188e5b0aa899af1e454859f40ebd0cf4 | x86_64 | gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/cbc0fa0a6e0cf3e14c5850d952be8c9e02135010 | sh4 | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/b56ee248b203ca44ca9632848e36506214e98ddc | arm | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/93d3758557338c76f1d86b4736b75e1310f56119 | mipsel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/7e426fa020058eee87374acf9be4439ccc8527eb | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/988f7369716e97f842009872bf423709cec1fb9b | armeb | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/51105936c2e6eed5b347340e897f99d98cfe829b | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/75b54919436655a6f68c0aceb4748b5438b5bcf2 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dc74cc78ae70ae2c71bf3d6f9bb98352c6a0400a | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/21f288af128fd84338647124a8b821412dcdee92 | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c92282948c88cc1181797f61f5805f57e716929b | riscv64 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/b7154799443e478a01224acbf37393adaf5eee3d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/92967e637918011c10a933083c4655f17919b750 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/606be58195ded7814eecf1e6bba2cdd6d6829333 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7db3e8cc4b3dd3da7b55a949584fa09ff2f7d05 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/382981fab3beed73ea9c01ac1982b6d03e5e5372 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f79e913994f3160ca40a484d49a32ed6037cf1aa | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cda702b917f862d0c2aefcb5922173917695950e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ed0ce746c403635aa6040f78ba75a85131db1ee | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/381fc2a51b08c6ac567e962ab69f3c8a57750e0e | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0c616900a840a41180651384872c8a46289c4f8 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e943ebad75c2df1ef3179adbcf3e41b57b5c347 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/924c34433751edf23a8504f7e4638fe86f8c8673 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3f798a02207c7d7977704cb2a479ee670b5fc91 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62691b056997eccfb7a04508a9b4d476590c640e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5b7450d5ede291e6911f0e48da4eddf436fa322 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dce8ce6758b275e6cef63e0227e8c7400dc6a54f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0fe88e4e9ab10ec4422e2b3926d5eba3884e7fd6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9961df5f640dcedb6ac5f4f2354b907fa7a44580 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec26e7d2ac55a1aa372adf59cf31f4a65efd71ee | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/001c41746ef525ec3cac8f3e4df55123c0a6f35e | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07cec08db6305e5255ecbee7ef8bf6b0a8be2c05 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82434e27796eda91a2f0a2b8dc16b704ace14272 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f30becc5316c26616fa650280c8a2c1beec881c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e326189bebaca6610c2b648067c7dd2787daf622 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c2cb5d86d640729aaf8b227c26a93e9f61430a2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db5a4f6891022253d1047b1ce61a92580f79281c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d4f7bbdb3fa369e713356a6b7ce273b0015c3c0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de2b0d161ed73ad4b3962a370b590c6c50c2599e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/822a2d9c383e30db9c6b2d71c50a72d0fdf73a05 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36e5c59002da51428244e5f8b4fb4dfc72a2645f | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9510956aa19a5d131761794a841389da14a301d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7475f1e7a6e1355391c6c1d36bb51f2ebcb0e7b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a352ea3441846d9ea0649eaa3ba0628f6de7567 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7f1c468053584ce02aa6eef75f26680ad607143e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/655c68d779dfb0ed7931a8dc35d94b06fe5acfcd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4971cdc3f99a3ccaca12a80e64c95d4eb3922cb6 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c5f90646969d64746d943c1cf6b1ebb6480cbee | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fdbab65f356a40a76bfc3dfc62ad02ee53cd0eed | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b85421272f391f893dc3c06c4c93e76bda4e0421 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34288057bfc286ac064945c0b5205947e2163f7d | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b01e170b4a1dba558c31cd86b3257a23d760d7d0 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68e49cf24a839c2ad171b3835c114f35d4fb1ddf | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee21157b2a6c44c0171d68dbfc49974e7a763a11 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c318e70f7750f0428f99628282b445c6f3b1a3d4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d20b16242a0e2de2bf34459a7935e7954b57574 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3acf5b22339b08286308fa19fbc201a092c6cc2a | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee4eb46b83b52ac6065a138dd993db672b21d157 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0064a6c7086840a791770162844a0e3d280cf2d8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38fdf2a94ee908868b04838c30dab88e9eded44f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f16a7b71d5758152cecd5fa807626cf1e969c718 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/251f1af05c3c443f958091b5adf8cdb89926fbc9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e772ecb56c2715efb930e486ce436eca7af3d6d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2663af8cab8bb3164f097bcd90b9c1ee937c1481 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95d9a3ffac098623ee8cbacd72d99e7e246a0b49 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26cc3bed992aeaa48fe80ba596bd9d6a7c7cd227 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf2196072f28a9b782ec0fa98ab7b6cdbdfb32d6 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7f78f1cab3934196a391d0fa420b68a6781252f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2aef2de5bf964e4c9793bd49ed2aa6848460572c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9fcf93a51aa21937a80054ff9db700fe7e4a991 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d7e557a5b12fa20530d9f4a9c8ad27dd2a3604d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d551ed63949822976a314015f71f768c9725d3a3 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a446b26b3401b5ac71c08227b7c7ca3fdcd3109 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0049bb80bf0d523b29d9a72c8c17583fd1e05f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/314cc85c21076978cf16a316f6ae00bc3a357f76 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec25318f08631206f66f0e6abcdd519474fbaa17 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0d33f44ad861b980a204a85caf4de78e54f0dfa | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d51a36f01b7d80d6ed508b49d14df63ec4935cf | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14892dae2574e326640af8c63773f2c29fb17d09 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a7006fef918d65861427b119009d2024961d6e7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97752c23b5f8d313449def06f81b64c861cfc5e8 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33496ff19b606f939f1a8069b73083c935b59b85 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/501e8b005b079b0e97a9e4aa7efe83313308cb33 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2d91a6a0913715ff250ddbb3ea946fed3189243 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7d1b1a39d2fe117f541d04b6261473ec3b97532 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0fbb140d5fcb56be867a54a8ca6b01ff20ac886 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cbb215fb5e9846be0060d344153f5c1600fcdc2 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e1b94fd989209ca48eb5dcad9b852e5093f0d7f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c700f33a758e41c63440ceb2065929b2ca71bd57 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74c6a7a8eb68b6b0bff5ab53e72ef563d3238e48 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f0d6d4471680690002141716619d73cdae13b36 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a482315402d9740004918258e3379b30b485aa1d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ea485e74229e630ee2269416e78081d3e752734 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c7e681218f87d24e95055d895f6d6bd2042fa7c0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90e2d0f534b684aaa91215349ac874fbcbb8fc5c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/05caa742c8d57e3a21be90a6e01956b3ccb2a465 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ed01b04676c1be5074ddec7d064ec12f5f0ba4f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e3bf149abee1a5a0b57add75be7c6a4995e8956 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0030b07006449236b2c9a645d9b7077da8d2e022 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c787df861fe10a48cd5ff68dc6eb069d3ccae2b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8a45b83766b90d68dbc8b69ca30631dc353cae2 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e89fe98d1aa9ab7d5dc26edf3b00123e3cc7756 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc1ffa9f0f44130884ab5b770e8dffcfec5cd0e3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f83ce6ffee96358d238ed11dab0752dfdac13e7f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad25646606b4ce93d829d537f72232e9c02a7b9a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7bc623920bc9789d6d837e1e0010e7eaaab586ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dd9fb4e422102c492ec46088eb731f183673d2a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de46c5803d285d3469cd5b5255bc8157d863f85f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/43a619831b7201378f7cd24368dd8b8235a8878a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15e453ea21dd38fce0899382c6a42ffc0e6c4194 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/84090c7b58a76a60862adfb6a1c216e377133d15 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6abee43483e295b55ac3bac5a384cd76dbbbdac8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1aff306cc70621ed9ce50f34faa8117ee0613f80 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ef6c53bfbaca309b2ea49bdb25ffe02a2914a68 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0efbbf183c933d6d145496cd123a05045c8af32b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4c6594b36e626c7372546faf3ae13a0a6862871 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7bb306fcef31aaf0ebd0b9bbf7ba9b1a9b972518 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8afdfa22027487de475276f07acb39b8443f15 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2e8adefe245c311593494ec08dc063b0cc935ab | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fef4bc18ec68c813972b4cc0d61a7a56dbab4fdd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/213f601a5dba8d63fdf6b93a0201dfb8e4b744dd | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18ef9c53f84261caa6896bdbb921551f7aea1450 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/62220612c279ba4e3293f476bdac7a59f79e4582 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7dfddd4d069a3b759bd6f9ea7da4287387f9bc90 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a05613802f2b03409c08445ce543c107e56642d | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6babaa1e7704c6da9aa43a3e4d02e64d66f3e9d2 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/559687da2510ce21ac5d08975ee9145fa92ed938 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c6d995895d87832a8a7ca01db61206f780b2dbf | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29540f58c3900d8ff80490cc608c2cb8901faee3 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c86c9d806828ee444aedf6b5cf8ea5e6fe3b7caa | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0780f2fefe951e2841a09d2bf717fe77efdbf1d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9530afa328b67dca2a9653fad620e27b693adb7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6770a4320d91fe840e879eafcfde5cbf26eff4f | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80b60b15fda956dc352429d817ea288abd0c0a6b | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/330522bfc31b3acb2be5264c83b640e9bd002722 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/59822375fbcdef644dce5098deaaa37b570badf7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54232650831e86b69d1d8605babbebb880a14710 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed0f9fce859a3c5a3b8e476c2f2a4b1599c0cb0a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b994f53763020dfae41ee60fc83a402a3e138d73 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/977603ece717851bd1e2b63b4bb68ad856067447 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc5ba96dcaf4a25e7818fbf70a8db71c975bb370 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8f94ccfa896d8ce60b5c390ddbf1a26fe338706 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3cce6cd80cea71fb7076dddd5eaf0a56240f7a4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fbef0659cde72169b0b2981d0e228dc4e05ef7e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a021fbc5e3e1cc824e947cd334837c76da93dba0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88019cfe2ffc4009c7d1707556b9118799b5997f | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b49aa6d8ec685df7eeee2d8b6df5e593c9e20412 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d655b35eabc18ccd9048be9fd1bafc5c233f494d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bd09388d6df9ab9f44ccf4655d84b6a05b4a115 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1875ecf67a8b17edd8e8fd1f97ebd97a14f82cf0 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e7bbcf5fa2bcf677c7107b4ee862031bb27bc0a4 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/815a04bf0a0464305e4064581ed97d847c35fd45 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/60f85e8ae7c1a4d75c3ed9028d881648b1be8aec | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b58a7c2161a6854e30c99934fc88fe5b501e830c | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29f71e4b2666926ec14a7eaeabcde7004236853f | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/098c04879afc7bd91b56ce516d81a73a4905e437 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d23f3dc6c05ef43ec7fcb0a8dffbd04fd312e292 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a89cd9f2a53859498c04c443ec94438752dca3c | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/656256a7a874edf1e9600a442feba41bbc1ea46a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb354369e1c3219887f656378213fe5925e08a4c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/892c38d043c39d8bedb76f93e165dad341cb0f27 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/51931c669cac7b968ab10baa96c1b46ba527701a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0f4a3ab228715dbf1929be94bd4f0cb0a9bfcb5 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f63fad0d0b8edce5ad1fc880fcffec2038f2c649 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f95f03309ad360ea64eef69c50588ad1a38522d2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/964a6143439d3312007e9b2eae88b43dee4f8ba8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc88bcf26d0cbd9f579f10fc9fc4bbfa342baa1d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e64f1aecbfd85eff00bfb82305f7537e245e0a16 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/81eadfa570edba05223ac85af94fc3fdf05187e1 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea621c61559d2e11e1dd30f9ff71d658bb80874a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd6883049d2f44da1435a0e3f6854a32834edb6a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7243a8700218bab88082e1327a71219a18617490 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cd00000f3645644fe73ecc33069cb608969a2ca | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fce6b6e2ea580a695f43581722691bb07dd21551 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c31c422699b4332dd4ba45631bcf0fe5aed19a3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1394889c4243ca816ca75a42a9c9091b9d24f399 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6405315d3d3edbf9bd1a1dcdadbacf14d876fd76 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a220b1b251e4852edd6f620a04611f32b8c3d649 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b653bea00cd6267234f83fd231a74483ffd21ad5 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61e83e6cc88841700ea595873f43352288a79079 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bee1d025193b2afe10f4be620de96fcbfeee038b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e539d2751bd3e212c473d659361f74f459483c4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99e446ee132dea8edf5cf025ab2fa2c3b4ced21a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d580bc3e7d5ae101c94d9d54bdbbb32f805e07fa | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25a0441eab275bcb0956d33a3b90e8dfdb89bab8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b46b70174e97fbb16cef9c73546b1c73a491bad7 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5338f7e0991dc2e5de471248fa4ae4d3be4041c7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c82860a64d4ad92b8b962c19d04699b2a920566 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a16aed3a9eb766c3a559a05a84bac76f83091ae | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/143a3232a7f42f40ff15aca903d6366e7c8c2b39 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4190226ffaccbdee496b62b8010a0a62d5159902 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bb519bf3179634846b1d0f08f4c3600b21aa915 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c08d9668cb721118f7c3b8d230ee92e5e8985e5f | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e362931c9a4bc61e191589b5ba759bb39a28d951 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d67eac8f378869fffbd0104d32542ffbeb4b481 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46a6122efa7ffbf9e9de2d5f63ccc631b3c7e522 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/072b04d0bfc5f3d5370fddfc195d323d8988dc20 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/08a39d599bebb173993dad2f9c3264b9c2ef630e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d79e2cd591d557bdfcd80bb21659aebf60845e4 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/946c5727f04a27390c229381b42725e4cc063955 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33f3ef8dfc5b26aaef028758af9dd7f9cf2b21ec | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/476c60b37d6a14f01801505566c06ba1a182d97d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/344ff801f6a7d21ef912fedfe2c3c16b66446114 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b02bf93cfc8afa39f49b7b7de757136f4515c5e1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddde47eb7d4f86b294def5b00ae4ec7cb082c112 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fcaa13d84fa9ff67a9aacf929ada8be4cc7f15ea | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71e3bd8274d67565b9c76a89d2ca1c5f708a6f78 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a76dc0e143d64434beceaaa19f42d91a5fa0f4c7 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f4ff5f51d18e89edce1339486b56f57f41c8ef7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/524ceb9f49cfac2340e56d4c0ab3e7e7b3bd850f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0864cd77bc54be1fe6e7230dea4017b5a34c8f7e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/195f9d7deb3b81127c76c5c88f0d65c522d4b20e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5dd1e9fa9e4655eebd5729d755cb23863d43bf25 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e5db38ff1188bc5e14372dab68be3725b7d056 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1afbccdd57584334bb64b164bdb2bd4815580a26 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/161a41580776f453ac3e14bf45e4d7bbc5e7b50e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e82d1f2d1baf32a91a72d6485c46eed183051df4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6061b80164d1ef66774b59ad3e1aed0764113260 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f9ec4ae5b162d11f64ac3be4080b29a180612a5 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f49ddbe19bf9f73f3cd7e88a6248d94c02d5f6e3 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba7f0037b4439469b4ba166ea23e7d53c7773b11 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/336d26dad4a959a2b862e30d6469d65ad942cb8d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c004df65d512baa1930e2a362729ee8cb60fb504 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef7c3a8b0063aea6d20c18924522919419cd2ba9 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa54d4727fdcac5c8392ebaeb7a8d0211eaeefb4 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efc397e6f11b29cb0662f9b1f8694c952a6e55ff | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2828ebe340f135351670c8c5ede7e5f2e4959b0 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/957b5c66449eec817371c298c5b1e30ff91471b6 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/827eee639ce08f54bc268fd6026454195fd63172 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f1c8d3562f247c9be62aa59f814b55e1e9759a7 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1b6164d2edf057feac45f2a5c0b97a8630bbe29e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc984ff89f2c00b351bbfb917c339e2933761be2 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0800dcda8faebc70330e17015ccc2d378de827fa | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9948d06272039285f518486c54923e5e53ae48ac | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e93e0535e87f38795ee54553e317e43e961a6f05 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3dad7c942c12f2515d1a391d3e9748ef452e9e5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a388ed008a79793b7c11a126f1c44212e6debf6 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/096d40e88ee2c939131d9275a5dc0a5d4073b8fe | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0491516d1320bf496c9740c582012ddc2a21ed3c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f2f9db6a5646c0c2463ccec38f3b078d8d7b3e3 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf65bfb295648288ba25a9e712b830aee3cd420f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e168c89211be564be01e23aaa48455db6eecc9a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/185da74206d667e55c945be3278bd934dbec588b | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5a5f787f2e5f699910c09fb7d844ff25b3ed762 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae3cbe6679bd87295552b54eab7e019327b7e81b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aa34f83efb110f75c359c87729d07fad819ba70 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e995c2adf60ee86ef305e5349ad562083fd04c3b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d5bc0e2f88e72858e79b7589918fa7e00f747b8 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5eac92fae57940ae64651eb9a0aa435b04113b2 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/942a59850526d2c027632b72f0e8502b9e15022a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16f93c8cd72143ea1630ba269a8ac6eb39dadf8f | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/127b2f0b697139c37c61d461e12cba52f067f4be | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad8256c5423c91d762093797e7111474896795e8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85063acf49726c5a6d88ecc2218f11bf4e82489c | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/49027d9c4de7dfd15b24692216bea72a48333f97 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c785077ddf61f1379f87acdf276eb94d8d89185 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b745eff3f0c0c1c0b4934ac51ce733a4515113b8 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c66b3965c8ce805e4548b0469a1f4b2a62419fc8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac55522f0fbe31743989a0116ae08b04e72b0763 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/539fcae412041ecd14585df110bda97d9f96dd4d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e69ece5266854c3dddbec2202fbb9bbfa729efb2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16097197a248529f54d708b52e60ddfa7f6e6c71 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7fbb2a39aedba0b66cdfa3c3751a998680f8cbbf | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c4fbce5a03f6977e4b9ae345b6a986546f834d89 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58034c97610c16391a46520662c2e285eb9ca73 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37da3a5176c6022412138aa4cb45821155b2742b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab5e0f91a9206ff4834e4e01003cd357448d8c36 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d518f5b541a11fe0ec47db226f5d5958d8bcf45a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3dba10c065a1c40eecd5c2b25be51101ff32b41a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/154b8491f485639c9d46750926e9d354494a9c19 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3e13e5f8a37cac26b9b4b445d5dcbe3f9b64f6 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54df6bf6ced93e3c69cf50e28bdd01824d53073d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ff113f7c2930a2c29396ef04e48cc776227a085 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/664e69be9f56d3e9518c88e3999c9778746ea277 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c3ed252737f64522064a9f403250530c5c18174 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cb27113937de0fd06ae581fb3bdef0fd0fab78fc | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e6a876088905b96868fb5c0ff8c32d41977e436 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a890a762aad3a3068a31c7a614591858729277cd | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2cb2377f5e08afcb77eae02fa8ee0f03a68e494 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec64363a6a5f304abd98a3e4b2491ed7afd3cfed | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65cba3c8414454c0e50295c3f859e26007cea2e0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/886acba998a208335595d57cd3479d0ba20828d2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc3193731ec79c51e7c1c8d205adf35410519767 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/485fcaf470ace76c2daf08a5f5a35c9b6641c893 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/94cd543dfadec0bd531553c2a88667280866dacd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c782e1270ef8c79677a7c5b02bfcc2d29c48e62 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fe65514371703146089100ca519e328e6a47cc6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddd6d71fcb0544cff6d13a3632578514d91bb8c4 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88526bdacacb342b3e1abf72fffb8e9e8ebc5033 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/039ce035798817eef59bcfac4c35521a76d7efb4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30422d520d433e1261e50b8c562eb93bd0e13a95 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c429c7b187bd4f44bcb6b5b0ea478abc46023934 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/20f87098b7c1baa63894533aaa0731cb1bc969a2 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/42a5f3f2cce954e775bc54dacae0c6e734c4b25d | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd7b25b32c3bc09e09258fd8ad8fb56e867309d5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4fb1e54634198d92eb492a12e97cc00d7f2b7b20 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d86b253720e0029ab56eef19200ab337cbe8d9c8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a41cf5f2bcec81052f31336e56d099c9c905590a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bf89ca5e2812cb2c29f050d6c22b13313c64135 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e48b2bf1608e72abfb8f9edc0c07cde547283336 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1b0104da14c4074c4a2f88d66ae9bcd3913fa91 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9e8efedfe7380a99733206500625681c647969b9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a28220b8bc3d2917f1d6a6a202e67cb37074d79 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/662c81ea38d754ce383dd6aa326f5bf70f5e8f2d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c29045cf0d6872b0b882cafbe3734f15f5d7c389 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0edd07ef2b32196bafc84a7cbd5314be81ecb47d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7900247d479a1c90ddb209d00325c2b90aadfa7 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9611ad7fe4e9551b9a6e326fbaff81e83e120db7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f400b68070b7ab1d9ac179dde48ca40836201ced | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c37cf3781c68c41cbab0aa50e96950caa8fa4a91 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55c6033f11da1205b9aae338e8ca6360712b4a3c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a7e3e40d0b3320622e9b1e2d37abdd9755184a5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4fbfdd9df006fb9373a72947bfa6b1bb5dce45e | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ddb5a4ec6add453607a0119782e0315f84e081bf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d3705e7c2b886f4ede586128e020bada6356cce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/03f720b42fc1ace098fa5cf1f262685e00b42d8a | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47e7877d79e6461b3dab6b7f6c3912bed027485e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e552999108aebe40649d433469b9c9cc9a5d4fc | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/796a67994a929391c865069ae639ae13d61e85bd | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00845feab35436b351ae91f43ec8cccff6a677bd | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4c34989303ab51344c53ebb7a500814b1b501fe | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/266cdb47cec19e577b7a684ee39dbcc19e92d8d0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a7e30463062f1ffc2c49cff0dfcc553e726e352 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edc2e5f9d033ad218d51145ae01cab7c53928eb5 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc3a452cc41d52349deb7f304891e28f5f763271 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c1880094a69bcc780221b1bed3c2395abf8a3af | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c58cd96c34566c82fc284b5f2258c1a7867c299b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/189ee218ab34a8e217648c5b1d5cfb5aa1cd30b1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e42c8369e85a23c713fe3dca83773c343a4b892 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54480158d75ab735524037fbe35b37c3e5195986 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3a5bad56a62ee49f00c0875e18117d14e743a3b5 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c5f26c9cda3fdc4b5a8843284dd15a62e915b916 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54e290c86fa4b8e02dd16f727476e00853f73a0c | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fba9257645be8475cf0f8ebc801a09eb256e01b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91bc7234901cf76c700e237964fa2b3269ae27ff | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3153e9646d0a3b0634dbfd16fcd1bc30c8c254d6 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e1f392056ed9dcf54a238d26b526a74d48b8b43 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/724430dcf8524c18d1fa0400b9609db8da243b88 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9632b82f532105649f236b896abf10d7187e18e | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e496e944bfba79364a1fe1b34bc8fe77f5381c0b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1baf629f3802b2c3bf31a11bc2ac84e23fd9d42 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9de7c03d754555314813d0094f49de2060787932 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2be567fa9cb62cb871074e16f0b5bd68119df9c7 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b51365a77d28f679b57213b2ec03184b9c25963d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/718fecd697ea585756257d9230715978a7ec55d8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80bb5edfc0119fdadb5c9e847b95604e192a70de | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8a3c6ea4a66e51ad494328f7bbc20f3b04047de | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a29b7a7f00dc7f05ec6e0effa2aff2c62addc8eb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bcc2879d6791b7a1ce6f157b99e2611569cf5b2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee9e78759a0c663382165c210ed9cc85088de35d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4458f4dbacf9765ce3035c866fd19275f8ce833e | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aeeaf38170a0806447d386cb09d11304888886a6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ee0ad3e28e2870d654208a958adc66bcc7c6c2b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5babcc1acc706d92f582c61b7316b11f30f2d3ec | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c16eee633cc6b7370fab97bcd4800054306f385d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1db540d716c497785d1748a8ac4f965637246ac8 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9cb9706a4cde2fad896190843e8fe78a03353231 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/04b9b9dd754bf98e46eafa45d4a64998c179e217 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a27371e80122f8f466ababf35f4801b3663c81f | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/179ff2e5e6d7f22df850e3ab6396361b8729c266 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82c122cef266a825ac8c993fd6df17704481c3e5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8104624e204485eb790397de30c2a4718f09fdea | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/464542199b31f546d963efdd43c9041463641402 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/30c31b95429b52bda2cae39382c115f235fdeedf | ORPH powerpc64le | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/91ae63685841d4c385a89e76114e875b1f4d1942 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/6a44a5259bd5ddd7712644090133532b296bcc52 | ORPH i686 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/cb62ab5da51bb4270f10973f5ebecb3ee1f42643 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a4387ad5da94ec113c3edb718c9907b945d1cef5 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a24d76f73cbab80a47620f3c3fb6bc9315177869 | arm | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/237dac7049fbbf0e303a12a9038536f9b4856301 | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/3aade88e217f0aeeccd83c11ed1e662ca8004de4 | powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f1c0405bcad70799c4e8268bf29f16910fd641fe | ORPH arceb | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6249939bd0d59b8279199eb128a5cff362eaf8b9 | ORPH aarch64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/82b19d4fa45001a0662f398deac9a55ba67b8953 | ORPH s390x | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c108e7b27ceaa70d226e5d4729ac03973d6e235a | armeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a39bd802fb5010e66237be3188ec7b971a081e85 | arc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1b76303bbd65f30b172ce9597911a4606044516c | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bab272e183b16d7dbd443e139fb0c4ba112a8ca7 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a8b0a92f5b90f97fb092b11fb5fc4243ae1fb3ed | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4b3c0d3b34747824219f69888e2aa02cb874dfb7 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2946ca3dad37a6d691855d9f9ccda8801eab0d4 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b9da3f789fa99a56a1eee481db9efc2cc0b27d3f | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/33b821d5446afe0e0ce120383ceca05c160abd1d | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/414cf38e2a8cfc66cf0028a37d995a6d49e14c62 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b3c0847b264586562462568e923e84fbe2a312f8 | i586 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e4c890b6ce6c0165637465175af75c7e67b62e35 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/918b0dd1f146f6cbdf236de89abc87a6b1f07cda | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7e130b48f6c9a5a882de3c0406b3f0fb1cffed96 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/041696626e1ae703d455228022c18080039d7fea | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9258ed51929cd8cef2ddc03f3f9fe4c4fc010215 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7e637d2d1b9d4748a91bc84c697e0a80f9e54969 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/eb3798c7ccd13bed02be7d59e565b1c9ed1d53a0 | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/679cca546e438e2245e4e9a3a2d53e3cacb08f54 | arceb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/8de0ae839b9f28e0f2960564d57c7a30c7a4892f | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5fd1f393ede2c541b0bde7201249eec45beb8318 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9542ed571ece82c4dc3a00767097f30d9568911e | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d8706731c5529c11a5dfcf5dceec707c0efbeac8 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1144b847ea0d4f8a7c4852675b343d8f1521fa06 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/13dd578515270d251a49edc0fbaf4f8aff2c8e3e | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d97df9946146849141479e336f4f2fa287e949d2 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4c6e903ff4a6319971d9b3b07cd4b569682cd01b | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fc257c615d578b0a8927d614185f674ce60390f6 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fd1f5fd111336e9b1696faa4bb627aa1b2ddb190 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1e1f99861f41a980edc3b41c6ae9db72be6f9fb8 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ee4d25f22176642c10ccbaa79affddade485077d | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e1460c3b1902ef85ef33a1fa8678ec11dc054223 | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5398c1fecaf00d83359a2f0fdaa525cf9440d17a | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d1e8a194ae04252dbdf2e7988ff0a44c566b4eb5 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/be5e57bd5b54ee52f854e053baec87e785fd2e04 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ad6c29fc35c05d7cf91a1301973638223c272509 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c9ba4e6d8c5099780465d40609c9e653cc5e6451 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/65bc4fa2e50c83ebf247323cd4e8e20322dbc3d9 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/64b25cf5ebfb2b572ab8f06a7062b777eb69389b | powerpc64 | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/624164e8f3f45cbbfe6cc8add2b4990ac3eab9a3 | sh4eb | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/6bf9cc5ff7b1b8c0cbcc3a9df9ab4faa35876c27 | mipsel | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/bff8bb4a7b457bb25af6f99e14f9b6d81e08605c | arm | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/c58042b240fecd7d747e4ff96a25e4bd9679e8c2 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/01bc419bf0107cc06a9d7a3d05a4f803825ddc59 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ef7b5b83bebadde15110d202e1eadcce29ab50da | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b40d7045b339fa2584a39c87fc57da6056dd81f | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d626b2edda9df2fb91c5c27d1a34064c15fb23ce | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eefe5d2103b17ba0740d008f885b14025c909e46 | mipsel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/813cbb0bbd63a2f6ff360dfab389d4faa9e20878 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a199a12395b3055d21e85361c6c4bf0cc3b60e60 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/64526010ca66b7fe548a8a51564734138d61c990 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/1f1d8420de31e7c20bf38db81f2100d18987b3af | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/1c0efb41b23576c73af9a9fc726ab8b4bdc0d518 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/ac6d021ea0adc263b9612926f05c3e17da7c009a | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b8bc53be9d2fbc0754bacd865c18b1054ed8819b | microblazeel | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/df935fce3610adbeddb4a08decb9d390ddffb72e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/650bb4ee3dac54914ddcf4be5c82f2edb0bab31d | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5722e4a1d746f22cdc15e0df847341b84dd3ccbd | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c875e6cde769e416bd2fe7bb058b5e771d679e01 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/788e5da3583733517d0bf1da27a67d74546b7a38 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e256871951c740573eb1ff7ee91ae89079510152 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1cf8896febac7e411d4cd5eada17c7c0566f823e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/601c072354b07d3f2965d7fc91c2e998d9e07e14 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9e45236f904df8305b4effbfbd871e36cfad91dc | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/70c92d9969d7451987169c10b75eb183392a0653 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/798f9ee4016c7ee2f2d45cd0f093b2cc6aa33b28 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/28fb5894526afdcc76fd4d9af5df950a69603e79 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/26ec2e00722ea6f24aaa666309c55663edfbe058 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e039ed3492d5d2d3411f5f3cb86972a5fabfe0e6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6141a408c59636b396bbc571fe8df27ccc3d5e80 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9382a762afae45c71b3c12fc99257f09b78005a5 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1301ddd7092d2f969494bfaaa4c2639a1be8b7a2 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f1cd20e6e20181f378304d5222d3b833619d057a | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/98ee7ac394e210259bc96089a59b69d96d0ad698 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bf8e87cda21e0061a8bdd55fa8e2340e492ee73e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7c56a1d8029597348b9f9fa874258e46874736aa | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5ea573da48524e57342a283c2143515cf5f07df3 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b5fdd9796eebd8651811660b113c8b397c708a98 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/22ba92bafa28eeb80de55ed5893dcbb72cd2523f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b9cadfea141e6b6c9b6707b367e84b641b9c30a1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/34b8a46c0cad8ca1d77e80266aaf1b43da92c2f6 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/013f9db7c6eed2ee84315a11b85b2c5fc702ee62 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/937d39a6569aedd301c67e0575e07e3fafa2795b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fdbb6731b0301f57e12032978127e27ae0ceaf84 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4783ff2933897097572e9a8c213aafd7f28f61fe | nios2 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/992ddf300da2087f0f67f45a5c1a62040530109e | microblazeel | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/dee7415920b099871b24108d8c75385bddf7b417 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/393daca4960dc05364c768bb5f24c288b31cbcd3 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/b8a9dde0c34c944398dcccab2fb4827b9ff436dd | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/d57f860ba928f86f37e2ddad3b559e3db64aa7ee | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/1b73e72875b295272075d7fe7d8da2c917916fda | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/4e51d0531ed46d812ca037370469a8ece268bd75 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e43d1a82ae785ede6d8c0fefa598749b4cf3d5a | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e1cac018f8ddcc48ed6c3d3debb8c1dccd40291b | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9e5c426a075e16d67858522653574d0de93dd4b3 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c5e4ec18608e261439a91dd5e1ca2963e905f24d | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1ddce861ff5816a16f54ca341d0356cb8a131643 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ce9ecc3ac3261e12a0eacaa3e879fd7b36dd1ae6 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/96c8049c7f780b158bee82c872f9b0946b62abc8 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7b10b917ce0366e15b1e537d42b3488df24176ad | i686 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/66ac66aa0fc2b66dcfed84f7edda3bcc4eaac38c | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e6a20699d5f1d42bc79f26e879386e7c88a05187 | microblazeel | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/de52f39be358f786e68b69636447186c1aadc9fc | arceb | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/f4b2cc931b291797906b0b7a64f39205528cab51 | xtensa | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/288685d037f47e9726e92b53540a48ab294cf224 | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/f2268ad9734a018ffbd6219c1f2b0c119629224b | arm | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/14ba6b581ec22b800a80d3d51ce33e796fbb708c | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4927346428d6bd16120f39c9962c8fb1dad2fbf8 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/736dc5da697a354cd6a58a94598be141ab5ab0d2 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/5c942339e6e6342de903f620c90da4e8710f6341 | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/753660e7a57e00b034a0989176d3cdca5ff1fba3 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bd07d1b02dc2d3eb06135bfe739df9fc3d965f87 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/e8b9c762c62f31ea429d6b39653e6b4b99aa84dc | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5a9a6e06f081486bde1ad9b5d2074626c4b0e9ec | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e1c59743ceb7b91e9bb68182486bc5e3d9d57c84 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a881f562fdfd300567ef51b2700291e1bdbfb094 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/627f7240095264cfeb6e91c6e4d657e363893a8a | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4fac90367a5b385aa02996f2ee38e75021000909 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e38f00a1edc15cef8cbbb5a0f4a521bdc941e13e | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8749da3e12830c3549097fe423498e56f34fc240 | mips64 | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/6ea39a2c0f4341fd8c52d5058ac9c035b2d63935 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/21f2e328a5993016866c42ae701d156186a23b36 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e73756060dc3919a84d0d43379a6cdb1beed6ac8 | arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5e8d8e8c8752d7627635a6ba462df2a7322fe90a | arceb | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/8061018dcce6759785ce040bcac57b1cb21fbf5a | sparc | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/e7d07d8cda8a9bf3a2c0f59102a7b07d490d050e | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/23d8e4a69886bd09bf35f08624a2f42420410048 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/46bdd574238dfff75f0f1060bc915d4389a6186d | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c2839a190f41b5d44ad08ff2070dc74147f3dfc0 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b48caa9c5d1738824645991b7b0ebf760bf8ed7a | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/71539cf685b35b72c8d9cd105c6e6a7539806468 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/8fc724654729930fd02f79dec74162a841fe16ef | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/f68ef83b5edc5a1fb75a84fcf30b9beb4e969e11 | xtensa | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/958643368a933a86a0b4262dc4c6cb5e99b12dd2 | sparc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/9160847c67d8d7490bb31ff1e9a14fac16f20df9 | arc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/8ac19dc8f393d5c7075b2742949d45b513cc42db | mips64el | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/eae68dbdf96b990d00e516310cf04777740c204d | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/218ac4413549104f7b6b3311abd0c2bf3f1120c2 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d9974bbb1f41943d6c971c4b4afb482487c9da3b | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a6c7302a4e08b56c9dc547ce5cfc4d1801609157 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7a2e64905e85897ff575fa98b7f3ab0c287e2b0b | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ab08700ba883e4c46bbf0a73a635901f456f9736 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/84ca0e2d0ed29deb857ed360bbd311670d2b9a87 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5b504a5b413881ab2c22d5c93b1b91439e5c7f6c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5a86ae574a5178a3dda88c0286f57edb8f450ed5 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a313d414e4d1e44e95b07929a24f1edb029e3d1a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/6d5ebd6ea8a11d94ba01efbbcba2f7791fab970c | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/61e58b4aec16fcca90fe42ecbe33574f4dff4b1b | ORPH arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/78ea2d623e899879b309373d1c97e70377b69ee3 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ee9f8a4a7c16f8c133736e56fb44b28f3bc0e307 | microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/18b7469f80d35aea3033ee3a9ad0894c71e84731 | mips64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/394df79a079f4dc2182719f9e4fcbe45ed09299c | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ee872c5f652ef4e5e9d1e3212f8818ecfd6a5c5d | xtensa | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/23840143c63724059ae8573e6ec1d3c1dad34a99 | microblaze | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/56d889b515f1f963a68d9779f8cd1c011a59d723 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/86058063275b6806ebfc0e16cc793e943681d180 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/27ae94c7386260ffc0cd6ba98fb7a13ba72e0a16 | powerpc64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d0b7feb5ce50e0d0712608a7a93181f24881332a | x86_64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/c135de188466368489ffb4d979a67861802c85b0 | arceb | libsodium-1.0.18 | NOK | http://autobuild.buildroot.net/results/0be1b19028eb2a67ae5279eb9b52ddbd523c38fc | microblazeel | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/4d855c06e6549f01169d48b23bd4f8ae44164bcf | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/2515a9e108bbdbbddaadffb096bf921010943b50 | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/08fb023c339e632fd4da7a801df155785583b841 | ORPH arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/4a49f34f3cab4ae1c619f82b673db5a508118ec6 | m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/32cc6ae069b38c496eb91763cb08fe432986f3cc | ORPH nios2 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8b23a989f881c4600aa8dbd7ad0c777852b8f233 | ORPH m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c57c122a7f0e1a037d356ef10c76c94009c64ff1 | ORPH microblaze | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3221a0baf1694081843f64dc56fe27c9a8fb31d9 | ORPH m68k | linux-6.0 | NOK | http://autobuild.buildroot.net/results/102ef4f864a61c30fb1fe7d0682a01cb3951b03d | ORPH sh4eb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/3cd0ddf1199539f4d9b1af84e0552390e5ff8deb | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/fd6083c961e2d92fab3be241e77dda630169639c | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/4ed011efd9ddabbdae5c044b37d301831e053ede | ORPH arm | linux-6.0 | NOK | http://autobuild.buildroot.net/results/16a77c9f8d5e576df3792673a7f1177a45ed2609 | ORPH arc | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/d05431609b28abaa5f8d7ca1250c552ee9217faf | microblazeel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/5781611516e01dfe93dc126f8d0d5ce823ec794f | microblazeel | make: *** Waiting for unfin... | NOK | http://autobuild.buildroot.net/results/b515410f7f5ce09f2c1a0a33b1074a866c200d8f | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/613373a78b51865bc1b16b526886da8838ac3dcd | ORPH sh4aeb | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/4c37d1a573073148bb8595e53e235fc9a5b96b86 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/ca003c8dde67101696d37aee83eb659b61be12ed | xtensa | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8a776fc2bbe8d5b498d3198bbca12b1ec1283015 | ORPH mips64el | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a1ec22aa8870bc99c1823f4eb5db20436601c6b0 | ORPH mips64el | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d0defd5bb9db08dcc8e716aa4bb0460d41b48be6 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/52eb2a5a05d2a5a370565feb806447cbe38e40ed | mips64 | ncurses-6.1 | NOK | http://autobuild.buildroot.net/results/0b1df05feb7e76dab92e8f557fcbbc71d0962df3 | ORPH aarch64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/83134a6b2442a8253ea35460851a34c08b4af19d | or1k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/a7e8c90d7ee6aea1d83192624770ac57810ea795 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/111de411b453620c9ea288b133adea88459ec57a | mips64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/6ad906749e0e949046e4cc721c94bdaa8f145e23 | m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/a192a2e7f7ebe964b4df9fa8b587cb023d7d9bb1 | ORPH aarch64 | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/1feb9e404bdb4296aa444052a456885e28479aff | ORPH i586 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/c9b63855a90530ded549473d6190ce4c23cf09f5 | aarch64_be | package/qt6/qt6base/qt6base... | NOK | http://autobuild.buildroot.net/results/1f51287fd4de387a155991727aaa8e14fd358049 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/7ba3f6da3079489b74b39457256616c317f92cf2 | ORPH arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c6479517e5ee98a7a8953fd096559d8bead598a7 | mips | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/629c1c5036de21f10c86519cc7eaae050c4b4ae8 | mips64el | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/50379d582726c92be522ca33b56fb5ab32059ac1 | mips64 | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/d7762d17b1ba9c151e66ce67a41fecb53f3546cb | microblaze | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/2f82fd9a98da78deae83a4c15dab096398ed2f1d | ORPH xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/bfe9e6410a16d3b74e886195034a90bd55e4ca33 | arm | python-pycryptodomex-3.15.0 | NOK | http://autobuild.buildroot.net/results/bde442f4fd25009a3443d2f9ec2ff683124271be | arm | qt6base-6.4.0 | NOK | http://autobuild.buildroot.net/results/cdb23094d7f27c51ab82f7c72bb91d0a838c2649 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/c0ec443037064015fd4f71383da2b746cdb4de9e | microblazeel | sconeserver-8d1935919a20133... | NOK | http://autobuild.buildroot.net/results/dcb31ec8f4d07d0ce76ec38ca7c993cc11e0d51a | powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/fa50faa426185652eeb489b4e260ec22929d0b42 | ORPH microblazeel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/c1bdfc87426a59ed04366e3c0d9c024860819acb | ORPH aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d07f8dd1cb824ad1b19a6eef9f9fe0f4273afff3 | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/642bd6df0ca171916f561a84c3a2dc652d4b5f52 | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6af423281aa59d9ce41ffa24bbcdb8770a570585 | ORPH xtensa | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/fbe1103f2f4f766f39d3708bb4fc1dd80306f8f8 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9ae1ae8088f2e6f5b4af8cc7f0a39c6ccd8e363b | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/32e3cbd0386ac9da32ad61c823cfe5c9ff8c1e7c | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b49c757de1dfb5d4e1402e77023a4d9cf1b054c5 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2bf99aba6769a328b081f0f03c291829df63cea1 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3cb1f46816dd5b5da1745b15b256cc790fdeaf20 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/53acf9a2c89100a19c977b389f861738899935df | ORPH or1k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/533eb346ccbe2b27b0aea8c58d4c6db9185293d7 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0fef1550dd7c8c42efd499f7baf9af1539cf2e86 | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/e24342bfb48a7b9ba0caccfd6ba7c3b5ee552c65 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ed6bceec818095e36324744eb51c420f38f83bd3 | ORPH mips64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/130e7d637bf8e64e9507a918f789f8df0a2fc498 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8b3edee414c679f9fb1a51a16602aefed25fb54a | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/433bf62be5a73436f4f22eced24a8e4903cbe4bd | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/aef29c8898ae9b8349c334d17f0924243cabf77a | ORPH mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/36333ccc6e27c8e46eecdb275ea3db8cfc1f6230 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7f8b65d5ca7f55349470f43794be220b2e19a579 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/88fd2b79a6767464ad62cb99c831903999793d3e | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d840044a2fff4437f51d7afd1e7614f3fab68c15 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a70eb8f59653946e88fba6effd9fa329884db89a | x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cea77c022eafab388084daddaf33ab9bd5efc361 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ed2b4a3926f945cea6c53a5250fa6b67dcfd87bc | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dd2216a7b1cd14a9d7e154bd969c2dc5df3b4c83 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9991a22980c6e49c7cc119370f2d530d70b7d402 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4fc494a10d89324277b29e19f531f7ba997ad518 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e5e1f160f3df784f0129066a9e32be784605cd1 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/2f8f58282e3ae423e4f793c274726c1203c08ec5 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/e968473de74c6ee91064331370c2025944734046 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/cdec55588089445c2288dc360d2fd86315843812 | ORPH x86_64 | trace-cmd-2.9.7 | NOK | http://autobuild.buildroot.net/results/6330ad2aecd919de3a1e34bfcd7dc96a4640154a | mips | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/88b0993e2139859974be8175e09b80d4504d982a | mips64el | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/2ee713610c330bd234fad5872ae18e0d83ce7e5e | microblaze | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/61117f4682410d2a9b1cb1a2a69257967fd63c86 | arceb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/57a9e2a40fa250d24bbb15e4d57eed5d264778e3 | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/6325f4a14888cfe56af4277f902499c2c125833a | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/104a943cfab7ef9671bee3d46d678493f4060db7 | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/8147b779bcac9f5d548068fae45f7b44a1f576b5 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/c6a707a9cbd630939dc971c41805c94de24a2854 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/7fe215104b9a22ee7be03a8db64281e03c02859d | mips64 | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/522d13a6f2ddb38689ebd5dc764fc7a8ec73e05f | ORPH arceb | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/314c2ad51762184d2dee7c9a5bd8d9c3e05a2d78 | arceb | whois-5.5.13 | NOK | http://autobuild.buildroot.net/results/896ee456c7e12413a4c32c17c2747ef21190a201 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/dd21f47b89ce8fe7597105c3685fdc3da9700961 | or1k | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/e9e88e7c11750065faf4c9d7955a43fb31f15df1 | ORPH sh4 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/1ed80a485d97965cb8691d2751c1b145c97e77d9 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/13f3dbbe7d3413d05d95e05379b9bb3cb13f8aff | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6bcd5a3f2d6ca576831c0d5b4c90e98b17443dcb | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/28f889889ce7a7056a1cb60ce45c22934ee47514 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 igh-ethercat-1.5.2 | 1 ltp-testsuite-20220527 | 1 nut-2.8.0 | 1 perl-5.34.1 | 1 pixman-0.40.0 | 1 python-ujson-5.2.0 | 1 tealdeer-1.5.0 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/887717cb761dfce9c13746edef036ce86597d1a1 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/37406aa7057fcda3184ac593519a336692918800 | ORPH arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f73db0333438a1b6ae4377d37f8b0e7b4c3a8c5b | sh4 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1bef06960d8c9c03d8fe895f5f8c18b561c58d8d | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e469cb121a4ed77d530657e879137f5ab587b8c8 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f82f0fc6b2e0728d1606e87383fd87b5d8f6a4ad | sparc | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/7d9513fe87ae9da2b2ed53ffaf7313a1b7e708eb | mips64 | ltp-testsuite-20220527 | NOK | http://autobuild.buildroot.net/results/0f769795228daae309f8a1174b19ba7b351974ac | arm | nut-2.8.0 | NOK | http://autobuild.buildroot.net/results/adedf3d150a44b9564f053cf8b6f68b687127adf | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/2e15d9f788b1a63e9957a4f1258e76cd0a786d75 | powerpc64le | pixman-0.40.0 | NOK | http://autobuild.buildroot.net/results/1bbf6ce396f6d40001ca5f98c0c6e2231b876cae | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/2cd86d759f5c25836577926e721a8376d14c73e7 | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/096d80974260e1e40d126b2700c30d65ed2e3b99 | sparc64 | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/18d846d3dc6e28932bc35e0f9edb502fd66ce9af | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/0a585149a5a493c405fee58443091823464fad36 | -- http://autobuild.buildroot.net From neal.frager at amd.com Thu Oct 13 05:57:23 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 05:57:23 +0000 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221012223315.68f43720@windsurf> References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> Message-ID: Hi Thomas, Thank you for the review. > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly from the > Xilinx git repository built by petalinux. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-fi > rmware > > It will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash. Details of the issue > can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Instead of using a pmufw binary built by the zynqmp-pmufw-builder, > this patch enables a pmufw binary built by petalinux to solve the issue. > > Signed-off-by: Neal Frager > I think the whole commit log is a bit confusing. What this commit allows is to use a PMU FW as an ELF binary in addition to allowing to use a PMU FW provided as a raw binary. > And indeed, this will allow using the PMU FW provided by Petalinux in addition to the ones of zynqmp-pmufw-builder, which is the motivation for the change. I will simplify the commit log. No problem. > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > Spaces around = sign. I will take out the unnecessary spaces. > + > +ifeq ($(UBOOT_ZYNQMP_PMUFW_SUFFIX),.elf) > +UBOOT_ZYNQMP_PMUFW_CONVERT=y > Ditto. > +endif > + > define UBOOT_ZYNQMP_KCONFIG_PMUFW > - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") > + $(if $(UBOOT_ZYNQMP_PMUFW_CONVERT), > + objcopy -O binary -I elf32-little > +$(UBOOT_ZYNQMP_PMUFW_BASENAME).elf > +$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) > You could also write this like this: > $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), > objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) > and get rid of UBOOT_ZYNQMP_PMUFW_CONVERT entirely. Thank you for this! I was trying to find a simpler solution, but when I could not think of one, I figured someone from the community would help. > I was wondering if the usage of objcopy was correct or whether > $(TARGET_OBJCOPY) would be more correct. But in fact none of them is perfect I guess: the PMU FW is a Microblaze ELF binary, while > $(TARGET_OBJCOPY) will be an ARM64 objcopy, and plain objcopy will be the machine native objcopy, very unlikely to be a Microblaze one :-) > So overall, I guess using objcopy is fine here. I ultimately chose the host objcopy because you are right, the pmufw is not an ARM64 binary. I think using $(TARGET_OBJCOPY) is a bit misleading. > Best regards, > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com Thank you for your support! Best regards, Neal Frager AMD From neal.frager at amd.com Thu Oct 13 06:08:41 2022 From: neal.frager at amd.com (Neal Frager) Date: Thu, 13 Oct 2022 00:08:41 -0600 Subject: [Buildroot] [PATCH v3 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221013060841.2766-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin V2->V3: - removed unnecessary spaces - simplified if statement to check for a pmufw.elf file --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..931a574f0f 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From thomas.petazzoni at bootlin.com Thu Oct 13 06:38:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 08:38:56 +0200 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> Message-ID: <20221013083856.4624e7c6@windsurf> On Thu, 13 Oct 2022 05:57:23 +0000 "Frager, Neal" wrote: > > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > > > Spaces around = sign. > > I will take out the unnecessary spaces. It is the opposite: you need to add spaces around the = signs. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 13 06:39:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 08:39:52 +0200 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> Message-ID: <20221013083952.145dbb8f@windsurf> On Thu, 13 Oct 2022 13:16:16 +0900 Damien Le Moal wrote: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Thanks for the patch. Could you provide the links to the Gitlab CI failures that are being fixed by this, so that we can add them to the commit log when applying? Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From neal.frager at amd.com Thu Oct 13 06:41:44 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 06:41:44 +0000 Subject: [Buildroot] [PATCH v2 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013083856.4624e7c6@windsurf> References: <20221012175426.32367-1-neal.frager@amd.com> <20221012223315.68f43720@windsurf> <20221013083856.4624e7c6@windsurf> Message-ID: Hi Thomas, > > +UBOOT_ZYNQMP_PMUFW_BASENAME=$(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) > > +UBOOT_ZYNQMP_PMUFW_SUFFIX=$(suffix $(UBOOT_ZYNQMP_PMUFW_PATH)) > > > Spaces around = sign. > > I will take out the unnecessary spaces. > It is the opposite: you need to add spaces around the = signs. Thank you for clarifying. I will fix that. Best regards, Neal Frager AMD From neal.frager at amd.com Thu Oct 13 06:49:31 2022 From: neal.frager at amd.com (Neal Frager) Date: Thu, 13 Oct 2022 00:49:31 -0600 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221013064931.60174-1-neal.frager@amd.com> This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager --- V1->V2: - corrected objcopy instruction for converting elf to bin V2->V3: - removed unnecessary spaces - simplified if statement to check for a pmufw.elf file V3->V4: - added spaces around = sign of UBOOT_ZYNQMP_PMUFW_BASENAME definition --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..0439ec5e4b 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME = $(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) -- 2.17.1 From damien.lemoal at opensource.wdc.com Thu Oct 13 07:56:46 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 16:56:46 +0900 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y -- 2.37.3 From damien.lemoal at opensource.wdc.com Thu Oct 13 07:57:58 2022 From: damien.lemoal at opensource.wdc.com (Damien Le Moal) Date: Thu, 13 Oct 2022 16:57:58 +0900 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013083952.145dbb8f@windsurf> References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> <20221013083952.145dbb8f@windsurf> Message-ID: On 2022/10/13 15:39, Thomas Petazzoni wrote: > On Thu, 13 Oct 2022 13:16:16 +0900 > Damien Le Moal wrote: > >> Gitlab CI reported build failures for the sipeed RISC-V nommu boards >> with the u-boot/sdcard enabled default configuration. The compilation >> errors are related to the openssl/evp.h header file missing, e.g.: >> >> In file included from tools/imagetool.h:24, >> from tools/fit_common.c:20: >> include/image.h:1166:12: fatal error: openssl/evp.h: No such file or >> directory >> 1166 | # include >> | ^~~~~~~~~~~~~~~ >> >> Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config >> files so that host-openssl gets built as a dependency of U-Boot. >> >> Suggested-by: Thomas Petazzoni >> Signed-off-by: Damien Le Moal > > Thanks for the patch. Could you provide the links to the Gitlab CI > failures that are being fixed by this, so that we can add them to the > commit log when applying? Done. I am not sure about the proper format though. I copied similar references I saw in git log. Please let me know if this needs a special format. Thanks ! > > Thanks a lot! > > Thomas -- Damien Le Moal Western Digital Research From peter at korsgaard.com Thu Oct 13 08:27:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 13 Oct 2022 10:27:47 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> (Thomas Petazzoni's message of "Wed, 12 Oct 2022 23:50:08 +0200") References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> Message-ID: <87h708nn5o.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > Y2038 is now almost only 15 years away, and embedded systems built > today are potentially going to still be operational in 15 years, and > even though they are supposed to receive updates by then, we all know > how things go, and potentially some of these embedded systems will not > receive any update. Thanks for picking this up! This has been on my todo list for a while as well!. > In 2038, the signed 32-bit representation of time_t used on 32-bit > architectures will overflow, causing all time-related functions to go > back in time in a surprising way. > The Linux kernel has already been modified to support a 64-bit > representation of time_t on 32-bit architectures, but from a C library > perspective, the situation varies: > - glibc uses this 64-bit time_t representation on 32-bit systems > since glibc 2.34, but only if -D_TIME_BITS=64 is > specified. Therefore, this commit adds an option to add this flag > globally to the build, when glibc is the C library and the > architecture is not 64-bit. > - musl uses unconditionally a 64-bit time_t representation on 32-bit > systems since musl 1.2.0. So there is nothing to do here since > Buildroot has been using a musl >= 1.2.0, used since Buildroot > 2020.05. No Buildroot option is needed here. > - uClibc-ng does not support a 64-bit time_t representation on 32-bit > systems, so systems using uClibc-ng will not be Y2038 compliant, at > least for now. No Buildroot option is needed here. > It should be noted that being Y2038-compliant will only work if all > application/library code is correct. For example if an > application/library stores a timestamp in an "int" instead of using > the proper time_t type, then the mechanisms described above will not > fix this, and the application/library will continue to be broken in > terms of Y2038 support. > Possible discussions points about this patch: > - Should we have an option at all, or should we unconditionally pass > -D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64 > for quite some time. The reasoning for having an option is that > the mechanism is itself opt-in in glibc, and generally relatively > new, so it seemed logical for now to make it optional as well in > Buildroot. I was hoping we could just do it unconditionally, given that musl does it already. Failing that, I would think we could at least make it default y. > - Should we show something (a Config.in comment?) in the musl and > uClibc-ng case to let the user know that the code is Y2038 > compliant (musl) or not Y2038 compliant (uClibc-ng). Or should this > discussion be part of the Buildroot documentation? Having a notice about this in the documentation certainly cannot harm. I'm not sure it makes sense to have it in Config.in. -- Bye, Peter Korsgaard From sebastien.szymanski at armadeus.com Thu Oct 13 08:57:33 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Thu, 13 Oct 2022 10:57:33 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 Message-ID: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> Drop first patch, upstreamed: https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f Depends on kernel headers >= 4.4 for struct mmc_ioc_multi_cmd Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 Signed-off-by: S?bastien Szymanski --- Changes for v2: - needs kernel headers >= 4.4 ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- package/mmc-utils/Config.in | 6 +-- package/mmc-utils/mmc-utils.hash | 4 +- package/mmc-utils/mmc-utils.mk | 2 +- 4 files changed, 6 insertions(+), 43 deletions(-) delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch deleted file mode 100644 index 7725f9ca5e..0000000000 --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 28 Sep 2019 20:44:52 +0200 -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 - -Fix following error with gcc 4.9: - -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] - struct rpmb_frame frame_status = {0}; - -Fixes: - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 - -Signed-off-by: Fabrice Fontaine -[Upstream status: sent to linux-mmc at vger.kernel.org] ---- - mmc_cmds.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/mmc_cmds.c b/mmc_cmds.c -index fb37189..6b09f26 100644 ---- a/mmc_cmds.c -+++ b/mmc_cmds.c -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, - u_int16_t rpmb_type; - struct mmc_ioc_multi_cmd *mioc; - struct mmc_ioc_cmd *ioc; -- struct rpmb_frame frame_status = {0}; -+ struct rpmb_frame frame_status; -+ -+ memset(&frame_status, 0, sizeof(frame_status)); - - if (!frame_in || !frame_out || !out_cnt) - return -EINVAL; --- -2.23.0 - diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac445..ac32ae68bf 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -1,10 +1,10 @@ config BR2_PACKAGE_MMC_UTILS bool "mmc-utils" - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 help MMC utils https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git -comment "mmc-utils needs a toolchain w/ headers >= 3.0" - depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 +comment "mmc-utils needs a toolchain w/ headers >= 4.4" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash index e8b2826612..1256f63487 100644 --- a/package/mmc-utils/mmc-utils.hash +++ b/package/mmc-utils/mmc-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..bf940967ef 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 -- 2.37.3 From thomas.petazzoni at bootlin.com Thu Oct 13 12:05:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 14:05:14 +0200 Subject: [Buildroot] [PATCH] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: References: <20221013041616.491620-1-damien.lemoal@opensource.wdc.com> <20221013083952.145dbb8f@windsurf> Message-ID: <20221013140514.7d88a068@windsurf> On Thu, 13 Oct 2022 16:57:58 +0900 Damien Le Moal wrote: > Done. I am not sure about the proper format though. I copied similar references > I saw in git log. Please let me know if this needs a special format. The format you have used is perfect, it follows what we normally do. Thanks for the v2! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From jesseevg at gmail.com Thu Oct 13 12:10:40 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Thu, 13 Oct 2022 14:10:40 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/qt6: Change license hashes Message-ID: <20221013121041.1398841-1-jesseevg@gmail.com> There was a major rework of how licenses are used in the Qt codebase along with a new location for all licenses, so change the hash file to reflect these changes https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 Changes for v2: - Also adjust the makefiles to refer to these new license file names - Added myself to the developers for the qt6 package for good measure Signed-off-by: Jesse Van Gavere --- DEVELOPERS | 1 + package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- package/qt6/qt6base/qt6base.mk | 4 ++-- package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- package/qt6/qt6serialport/qt6serialport.mk | 4 ++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..6cb8d0fc54 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1478,6 +1478,7 @@ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ N: Jesse Van Gavere +F: package/qt6/ F: package/qt6/qt6serialport/ N: Jianhui Zhao diff --git a/package/qt6/qt6base/qt6base.hash b/package/qt6/qt6base/qt6base.hash index 5dd26973fa..b004347a5a 100644 --- a/package/qt6/qt6base/qt6base.hash +++ b/package/qt6/qt6base/qt6base.hash @@ -2,8 +2,13 @@ sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d qtbase-everywhere-src-6.4.0.tar.xz # Hashes for license files -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSE.FDL +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb LICENSES/Apache-2.0.txt +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 LICENSES/BSL-1.0.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc LICENSES/MIT.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6base/qt6base.mk b/package/qt6/qt6base/qt6base.mk index b7ee6037f3..b53d53c653 100644 --- a/package/qt6/qt6base/qt6base.mk +++ b/package/qt6/qt6base/qt6base.mk @@ -7,8 +7,8 @@ QT6BASE_VERSION = $(QT6_VERSION) QT6BASE_SITE = $(QT6_SITE) QT6BASE_SOURCE = qtbase-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6BASE_VERSION).tar.xz -QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 (docs) -QT6BASE_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL +QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 no invariants (docs) +QT6BASE_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt QT6BASE_DEPENDENCIES = \ host-ninja \ host-qt6base \ diff --git a/package/qt6/qt6serialport/qt6serialport.hash b/package/qt6/qt6serialport/qt6serialport.hash index fb1b3dcf6b..887f67b2ae 100644 --- a/package/qt6/qt6serialport/qt6serialport.hash +++ b/package/qt6/qt6serialport/qt6serialport.hash @@ -2,8 +2,10 @@ sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 qtserialport-everywhere-src-6.4.0.tar.xz # Hashes for license files: -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSE.LGPL3 -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d LICENSE.FDL +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialport/qt6serialport.mk b/package/qt6/qt6serialport/qt6serialport.mk index 01763657b8..03197fd60d 100644 --- a/package/qt6/qt6serialport/qt6serialport.mk +++ b/package/qt6/qt6serialport/qt6serialport.mk @@ -9,8 +9,8 @@ QT6SERIALPORT_SITE = $(QT6_SITE) QT6SERIALPORT_SOURCE = qtserialport-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALPORT_VERSION).tar.xz QT6SERIALPORT_INSTALL_STAGING = YES QT6SERIALPORT_SUPPORTS_IN_SOURCE_BUILD = NO -QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 (docs) -QT6SERIALPORT_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL +QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), GFDL-1.3 no invariants (docs) +QT6SERIALPORT_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt QT6SERIALPORT_CONF_OPTS = \ -GNinja \ -DQT_HOST_PATH=$(HOST_DIR) \ -- 2.34.1 From dimi at tpm.dev Thu Oct 13 12:17:25 2022 From: dimi at tpm.dev (Dimi Tomov) Date: Thu, 13 Oct 2022 15:17:25 +0300 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: Hi Arnout, Please review this version bump. Thanks, Dimi On 2022-10-12 10:54 AM, Dimi Tomov wrote: > From: Dimitar Tomov > > This patch series bumps the wolftpm version to the latest available and > adds one new config option for controlling debug messages in wolftpm. > > Signed-off-by: Dimitar Tomov > --- > package/wolftpm/wolftpm.hash | 2 +- > package/wolftpm/wolftpm.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolftpm/wolftpm.hash > b/package/wolftpm/wolftpm.hash > index d24df58eaa..e256967a01 100644 > --- a/package/wolftpm/wolftpm.hash > +++ b/package/wolftpm/wolftpm.hash > @@ -1,4 +1,4 @@ > # Hash from > https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz > -sha256 > 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b > wolftpm-2.4.0.tar.gz > +sha256 > 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b > wolfTPM-2.6.0.tar.gz > # Locally calculated > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE > diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk > index 7e8a108585..f217322545 100644 > --- a/package/wolftpm/wolftpm.mk > +++ b/package/wolftpm/wolftpm.mk > @@ -4,7 +4,7 @@ > # > > ################################################################################ > > -WOLFTPM_VERSION = 2.4.0 > +WOLFTPM_VERSION = 2.6.0 > WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) > WOLFTPM_INSTALL_STAGING = YES > WOLFTPM_LICENSE = GPL-2.0+ -- Founder of TPM.dev From peter at korsgaard.com Thu Oct 13 12:56:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Thu, 13 Oct 2022 14:56:27 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/nodejs: security bump to version 14.20.1 Message-ID: <20221013130136.1D18F86BFE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d805244ed2bc014ed2d170a4c3e31e3836fc722b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes the following security issues: - CVE-2022-32212: DNS rebinding in --inspect on macOS (High) - CVE-2022-32213: bypass via obs-fold mechanic (Medium) - CVE-2022-35256: HTTP Request Smuggling Due to Incorrect Parsing of Header Fields (Medium) https://nodejs.org/en/blog/vulnerability/september-2022-security-releases/ Signed-off-by: Peter Korsgaard --- package/nodejs/nodejs.hash | 4 ++-- package/nodejs/nodejs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/nodejs/nodejs.hash b/package/nodejs/nodejs.hash index ab79787e45..769fddae3b 100644 --- a/package/nodejs/nodejs.hash +++ b/package/nodejs/nodejs.hash @@ -1,5 +1,5 @@ -# From https://nodejs.org/dist/v14.20.0/SHASUMS256.txt -sha256 2b5098498889d1e6a9709d63f3d6f94e696a5ad8221618c5d51159cee363996a node-v14.20.0.tar.xz +# From https://nodejs.org/dist/v14.20.1/SHASUMS256.txt +sha256 365057ea661923cbfa71bdd7a8d0ace9ddff8d22d431ad92355f8433cecff14d node-v14.20.1.tar.xz # Hash for license file sha256 d05c4319d4955d6b3c7beab2711ff61448b31889560d4b125bfbd35f16d3d3af LICENSE diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 262d60e86b..5bee082f14 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -4,7 +4,7 @@ # ################################################################################ -NODEJS_VERSION = 14.20.0 +NODEJS_VERSION = 14.20.1 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION) NODEJS_DEPENDENCIES = \ From jesseevg at gmail.com Thu Oct 13 13:06:07 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Thu, 13 Oct 2022 15:06:07 +0200 Subject: [Buildroot] Changing configuration options of package in another one Message-ID: Hello, I'm in a bit of a peculiar situation for which I'm not sure what the correct solution is. I'm trying to implement the qt6 remote objects package, this has a dependency on host-qt6remoteobjects because it needs a host tool from it to build the target package, however, to build the host package it needs qt6base network enabled in the host qt6 build, this is by default turned off as it's not a necessity for the host tools needed to build the target package. So to make it work I've added an enable for the network module to HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, what should I do here? Manipulate the qt6 host build it in the remote objects package? Or maybe turn on the network module for the qt6 host build whenever the target qt6 network module gets enabled? Best regards, Jesse From luca.ceresoli at bootlin.com Thu Oct 13 13:18:34 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Thu, 13 Oct 2022 15:18:34 +0200 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013064931.60174-1-neal.frager@amd.com> References: <20221013064931.60174-1-neal.frager@amd.com> Message-ID: <20221013151834.60d4a353@booty> Hello Neal, On Thu, 13 Oct 2022 00:49:31 -0600 Neal Frager wrote: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux in > addition to still supporting pmufw.bin binaries built > by the zynqmp-pmufw-builder. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > > Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Thank you very much for working on a solution to this unpleasant situation. I still would like to address it, but spare time is not easily available... however I'm always happy to received patches for zynqmp-pmufw-builder! ;-) -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From neal.frager at amd.com Thu Oct 13 13:54:41 2022 From: neal.frager at amd.com (Frager, Neal) Date: Thu, 13 Oct 2022 13:54:41 +0000 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013151834.60d4a353@booty> References: <20221013064931.60174-1-neal.frager@amd.com> <20221013151834.60d4a353@booty> Message-ID: Hello Luca, > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly from the > Xilinx git repository built by petalinux in addition to still > supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. > > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-fi > rmware > > Signed-off-by: Neal Frager > Reviewed-by: Luca Ceresoli > Thank you very much for working on a solution to this unpleasant situation. I still would like to address it, but spare time is not easily available... however I'm always happy to received patches for zynqmp-pmufw-builder! ;-) Thank you for your understanding. As you can see with this patch, pmufw.bin files are still accepted. The moment zynqmp-pmufw-builder is fixed, developers can use it with buildroot again. I understand the lack of spare time. If I ever get some, I will take a closer look at how to patch the zynqmp-pmufw-builder microblaze compiler. Best regards, Neal Frager AMD From thomas.petazzoni at bootlin.com Thu Oct 13 14:39:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 13 Oct 2022 16:39:10 +0200 Subject: [Buildroot] [PATCH] Config.in: introduce BR2_TIME_BITS_64 option for Y2038 compatibility In-Reply-To: <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> References: <20221012215008.2918444-1-thomas.petazzoni@bootlin.com> <5eebf7dee2a585f50a4e986c214677a157bfd22c.camel@calian.com> Message-ID: <20221013163910.3c6d9c8f@windsurf> On Wed, 12 Oct 2022 23:49:37 +0000 Robert Hancock wrote: > There's some chance of software being broken by enabling this, with > either a compile or runtime failure. For example, applications that > assume sizeof(time_t) == sizeof(long) would work on 32-bit platforms > with a 32-bit time and 64-bit platforms with a 64-bit time, but fail > with a 64-bit time on 32-bit. I believe I've seen this when trying to > build software with that option, so turning this on unconditionally > might be unwise, unless some build tests of the supported packages > have been done.. There will definitely be build testing: our autobuilders are testing 24/7 random configurations of Buildroot. So as soon as we introduce this option, there would be builds with BR2_TIME_BITS_64=y enabled, which would raise build issues if there's any. Of course, the more tricky part are runtime issues, which are essentially impossible to detect until someone runs into the problem. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From d.lang at abatec.at Thu Oct 13 15:01:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Thu, 13 Oct 2022 15:01:54 +0000 Subject: [Buildroot] [PATCH 1/2] package/iwd: drop dbus check Message-ID: Since 6f5f6bcd8 dbus is selected when iwd is selected. Signed-off-by: Daniel Lang --- package/iwd/iwd.mk | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..8497fd1141 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -17,15 +17,10 @@ IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell -IWD_DEPENDENCIES = ell - -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share +IWD_DEPENDENCIES = ell dbus ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) -- 2.25.1 From d.lang at abatec.at Thu Oct 13 15:03:08 2022 From: d.lang at abatec.at (Lang Daniel) Date: Thu, 13 Oct 2022 15:03:08 +0000 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure Message-ID: configure.ac is no longer patched, autoreconfigure isn't needed. Signed-off-by: Daniel Lang --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 8497fd1141..fe79704641 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ -- 2.25.1 From raphael.pavlidis at gmail.com Thu Oct 13 16:34:32 2022 From: raphael.pavlidis at gmail.com (Raphael Pavlidis) Date: Thu, 13 Oct 2022 18:34:32 +0200 Subject: [Buildroot] [PATCH v3 1/1] package/shadow: new package In-Reply-To: <20220904124315.12728-1-raphael.pavlidis@gmail.com> References: <20220904124315.12728-1-raphael.pavlidis@gmail.com> Message-ID: <20221013163432.18545-1-raphael.pavlidis@gmail.com> shadow provides utilities to deal with user accounts. The shadow package includes the necessary programs for converting UNIX password files to the shadow password format, plus programs for managing user and group accounts. Especially it is useful if rootless podman container should be used, which requires newuidmap and newgidmap. Signed-off-by: Raphael Pavlidis --- Changes v2 -> v3: - remove nscd support - remove sssd support - remove group name max length parameter - remove su build - improve help text of subordinate-ids - use a define instead of variable for SHADOW_ACCOUNT_TOOLS_SETUID SHADOW_SUBORDINATE_IDS_PERMISSIONS and Changes v1 -> v2: - DEVELOPERS: add Raphael Pavlids for shadow DEVELOPERS | 3 +- package/Config.in | 1 + package/shadow/Config.in | 61 +++++++++++++++++ package/shadow/shadow.hash | 3 + package/shadow/shadow.mk | 133 +++++++++++++++++++++++++++++++++++++ 5 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 package/shadow/Config.in create mode 100644 package/shadow/shadow.hash create mode 100644 package/shadow/shadow.mk diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..0dad0ba0ba 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2474,7 +2474,8 @@ F: support/testing/tests/package/test_python_jmespath.py F: support/testing/tests/package/test_python_rsa.py F: support/testing/tests/package/test_python_s3transfer.py -N: Raphael Pavlidis +N: Raphael Pavlidis +F: package/shadow/ F: package/slirp4netns/ N: Refik Tuzakli diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..d9ead48647 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2642,6 +2642,7 @@ menu "System tools" source "package/sdbus-cpp/Config.in" source "package/sdbusplus/Config.in" source "package/seatd/Config.in" + source "package/shadow/Config.in" source "package/smack/Config.in" source "package/start-stop-daemon/Config.in" source "package/supervisor/Config.in" diff --git a/package/shadow/Config.in b/package/shadow/Config.in new file mode 100644 index 0000000000..6b1fe0a61f --- /dev/null +++ b/package/shadow/Config.in @@ -0,0 +1,61 @@ +menuconfig BR2_PACKAGE_SHADOW + bool "shadow" + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14 + help + Utilities to deal with user accounts. + + https://github.com/shadow-maint/shadow + +if BR2_PACKAGE_SHADOW + +config BR2_PACKAGE_SHADOW_SHADOWGRP + bool "shadowgrp" + help + Enable shadow group support. + +config BR2_PACKAGE_SHADOW_ACCOUNT_TOOLS_SETUID + bool "account-tools-setuid" + depends on BR2_USE_MMU # linux-pam + depends on BR2_ENABLE_LOCALE # linux-pam + depends on BR2_USE_WCHAR # linux-pam + depends on !BR2_STATIC_LIBS # linux-pam + select BR2_PACKAGE_LINUX_PAM + help + Install the user and group management tools (e.g. groupadd) with setuid and + authenticate the callers via PAM. + +comment "account-tools-setuid needs a toolchain w/ shared libs, wchar, locale" + depends on BR2_USE_MMU + depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR || !BR2_ENABLE_LOCALE + +config BR2_PACKAGE_SHADOW_UTMPX + bool "utmpx" + help + Enable loggin in utmpx / wtmpx. + +config BR2_PACKAGE_SHADOW_SUBORDINATE_IDS + bool "subordinate-ids" + help + Support subordinate ids. Helpful to use container solution like podman + without root. + +config BR2_PACKAGE_SHADOW_SHA_CRYPT + bool "sha-crypt" + default y + help + Allow the SHA256 and SHA512 password encryption algorithms. + +config BR2_PACKAGE_SHADOW_BCRYPT + bool "bcrypt" + help + Allow the bcrypt password encryption algorithm. + +config BR2_PACKAGE_SHADOW_YESCRYPT + bool "yescrypt" + help + Allow the yescrypt password encryption algorithm. + +endif # BR2_PACKAGE_SHADOW + +comment "shadow needs a toolchain w/ headers >= 4.14" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14 diff --git a/package/shadow/shadow.hash b/package/shadow/shadow.hash new file mode 100644 index 0000000000..6b9faac10f --- /dev/null +++ b/package/shadow/shadow.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 41f093ce58b2ae5f389a1c5553e0c18bc73e6fe27f66273891991198a7707c95 shadow-4.11.1.tar.xz +sha256 3d25ab8f43fdc14624296a56ff8dc3e72e499ad35f32ae0c803f4959cfe17c0a COPYING diff --git a/package/shadow/shadow.mk b/package/shadow/shadow.mk new file mode 100644 index 0000000000..261f28dd28 --- /dev/null +++ b/package/shadow/shadow.mk @@ -0,0 +1,133 @@ +################################################################################ +# +# shadow +# +################################################################################ + +SHADOW_VERSION = 4.11.1 +SHADOW_SITE = https://github.com/shadow-maint/shadow/releases/download/v$(SHADOW_VERSION) +SHADOW_SOURCE = shadow-$(SHADOW_VERSION).tar.xz +SHADOW_LICENSE = BSD-3-Clause +SHADOW_LICENSE_FILES = COPYING + +SHADOW_CONF_OPTS = \ + --disable-man \ + --without-btrfs \ + --without-nscd \ + --without-skey \ + --without-sssd \ + --without-su \ + --without-tcb + +ifeq ($(BR2_PACKAGE_SHADOW_SHADOWGRP),y) +SHADOW_CONF_OPTS += --enable-shadowgrp +else +SHADOW_CONF_OPTS += --disable-shadowgrp +endif + +ifeq ($(BR2_PACKAGE_SHADOW_ACCOUNT_TOOLS_SETUID),y) +SHADOW_CONF_OPTS += --enable-account-tools-setuid +define SHADOW_ACCOUNT_TOOLS_SETUID_PERMISSIONS + /usr/sbin/chgpasswd f 4755 0 0 - - - - - + /usr/sbin/chpasswd f 4755 0 0 - - - - - + /usr/sbin/groupadd f 4755 0 0 - - - - - + /usr/sbin/groupdel f 4755 0 0 - - - - - + /usr/sbin/groupmod f 4755 0 0 - - - - - + /usr/sbin/newusers f 4755 0 0 - - - - - + /usr/sbin/useradd f 4755 0 0 - - - - - + /usr/sbin/usermod f 4755 0 0 - - - - - +endef +else +SHADOW_CONF_OPTS += --disable-account-tools-setuid +endif + +ifeq ($(BR2_PACKAGE_SHADOW_UTMPX),y) +SHADOW_CONF_OPTS += --enable-utmpx +else +SHADOW_CONF_OPTS += --disable-utmpx +endif + +ifeq ($(BR2_PACKAGE_SHADOW_SUBORDINATE_IDS),y) +SHADOW_CONF_OPTS += --enable-subordinate-ids +define SHADOW_SUBORDINATE_IDS_PERMISSIONS + /usr/bin/newuidmap f 4755 0 0 - - - - - + /usr/bin/newgidmap f 4755 0 0 - - - - - +endef +else +SHADOW_CONF_OPTS += --disable-subordinate-ids +endif + +ifeq ($(BR2_PACKAGE_ACL),y) +SHADOW_CONF_OPTS += --with-acl +SHADOW_DEPENDENCIES += acl +else +SHADOW_CONF_OPTS += --without-acl +endif + +ifeq ($(BR2_PACKAGE_ATTR),y) +SHADOW_CONF_OPTS += --with-attr +SHADOW_DEPENDENCIES += attr +else +SHADOW_CONF_OPTS += --without-attr +endif + +ifeq ($(BR2_PACKAGE_AUDIT),y) +SHADOW_CONF_OPTS += --with-audit +SHADOW_DEPENDENCIES += audit +else +SHADOW_CONF_OPTS += --without-audit +endif + +ifeq ($(BR2_PACKAGE_CRACKLIB),y) +SHADOW_CONF_OPTS += --with-libcrack +SHADOW_DEPENDENCIES += cracklib +else +SHADOW_CONF_OPTS += --without-libcrack +endif + +ifeq ($(BR2_PACKAGE_LIBSELINUX),y) +SHADOW_CONF_OPTS += --with-selinux +SHADOW_DEPENDENCIES += libselinux libsemanage +else +SHADOW_CONF_OPTS += --without-selinux +endif + +# linux-pam is also used without account-tools-setuid enabled +ifeq ($(BR2_PACKAGE_LINUX_PAM),y) +SHADOW_CONF_OPTS += --with-libpam +SHADOW_DEPENDENCIES += linux-pam +else +SHADOW_CONF_OPTS += --without-libpam +endif + +ifeq ($(BR2_PACKAGE_SHADOW_SHA_CRYPT),y) +SHADOW_CONF_OPTS += --with-sha-crypt +else +SHADOW_CONF_OPTS += --without-sha-crypt +endif + +ifeq ($(BR2_PACKAGE_SHADOW_BCRYPT),y) +SHADOW_CONF_OPTS += --with-bcrypt +else +SHADOW_CONF_OPTS += --without-bcrypt +endif + +ifeq ($(BR2_PACKAGE_SHADOW_YESCRYPT),y) +SHADOW_CONF_OPTS += --with-yescrypt +else +SHADOW_CONF_OPTS += --without-yescrypt +endif + +define SHADOW_PERMISSIONS + /usr/bin/chage f 4755 0 0 - - - - - + /usr/bin/chfn f 4755 0 0 - - - - - + /usr/bin/chsh f 4755 0 0 - - - - - + /usr/bin/expiry f 4755 0 0 - - - - - + /usr/bin/gpasswd f 4755 0 0 - - - - - + /usr/bin/newgrp f 4755 0 0 - - - - - + /usr/bin/passwd f 4755 0 0 - - - - - + $(SHADOW_ACCOUNT_TOOLS_SETUID) + $(SHADOW_SUBORDINATE_IDS_PERMISSIONS) +endef + +$(eval $(autotools-package)) -- 2.35.1 From kyle at balena.io Thu Oct 13 16:42:44 2022 From: kyle at balena.io (Kyle Harding) Date: Thu, 13 Oct 2022 12:42:44 -0400 Subject: [Buildroot] [PATCH 1/1] package/unbound: bump version to 1.17.0 Message-ID: <20221013164244.150039-1-kyle@balena.io> Signed-off-by: Kyle Harding --- package/unbound/unbound.hash | 4 ++-- package/unbound/unbound.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/unbound/unbound.hash b/package/unbound/unbound.hash index cef8edc4a2..147ac7b13a 100644 --- a/package/unbound/unbound.hash +++ b/package/unbound/unbound.hash @@ -1,5 +1,5 @@ -# From https://nlnetlabs.nl/downloads/unbound/unbound-1.16.3.tar.gz.sha256 -sha256 ea0c6665e2c3325b769eac1dfccd60fe1828d5fcf662650039eccb3f67edb28e unbound-1.16.3.tar.gz +# From https://nlnetlabs.nl/downloads/unbound/unbound-1.17.0.tar.gz.sha256 +sha256 dcbc95d7891d9f910c66e4edc9f1f2fde4dea2eec18e3af9f75aed44a02f1341 unbound-1.17.0.tar.gz # Locally calculated sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSE diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index 73a460d103..d86d9c2067 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -4,7 +4,7 @@ # ################################################################################ -UNBOUND_VERSION = 1.16.3 +UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause -- 2.36.2 From giulio.benetti at benettiengineering.com Thu Oct 13 17:10:53 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 13 Oct 2022 19:10:53 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/mmc-utils: bump to version dfc3b6ecda84d21418fb4408b39c5c71db4c6458 In-Reply-To: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> References: <20221013085733.4973-1-sebastien.szymanski@armadeus.com> Message-ID: <8c244426-0886-42a3-6d09-c9798a517a00@benettiengineering.com> Hi S?bastien, On 13/10/22 10:57, S?bastien Szymanski wrote: > Drop first patch, upstreamed: > https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git/commit/?id=520f54eb94845e597837ae908a03b91ae8c8758f > > Depends on kernel headers >= 4.4 for struct mmc_ioc_multi_cmd > > Fixes: http://autobuild.buildroot.net/results/01f78081a50743d1faa50a090c00b7e90a17fa39 > > Signed-off-by: S?bastien Szymanski Reviewed-by: Giulio Benetti Thank you Best regards -- Giulio Benetti Benetti Engineering sas > --- > > Changes for v2: > - needs kernel headers >= 4.4 > > ...01-mmc_cmds.c-fix-build-with-gcc-4.9.patch | 37 ------------------- > package/mmc-utils/Config.in | 6 +-- > package/mmc-utils/mmc-utils.hash | 4 +- > package/mmc-utils/mmc-utils.mk | 2 +- > 4 files changed, 6 insertions(+), 43 deletions(-) > delete mode 100644 package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > > diff --git a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch b/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > deleted file mode 100644 > index 7725f9ca5e..0000000000 > --- a/package/mmc-utils/0001-mmc_cmds.c-fix-build-with-gcc-4.9.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 6208cc78f6efd1fafc4f5bc6a487247a383df80f Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sat, 28 Sep 2019 20:44:52 +0200 > -Subject: [PATCH] mmc_cmds.c: fix build with gcc 4.9 > - > -Fix following error with gcc 4.9: > - > -mmc_cmds.c:1918:9: error: missing braces around initializer [-Werror=missing-braces] > - struct rpmb_frame frame_status = {0}; > - > -Fixes: > - - http://autobuild.buildroot.org/results/bf3b6f9f6ef39b99842b3c92495b7bf359c68158 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: sent to linux-mmc at vger.kernel.org] > ---- > - mmc_cmds.c | 4 +++- > - 1 file changed, 3 insertions(+), 1 deletion(-) > - > -diff --git a/mmc_cmds.c b/mmc_cmds.c > -index fb37189..6b09f26 100644 > ---- a/mmc_cmds.c > -+++ b/mmc_cmds.c > -@@ -1915,7 +1915,9 @@ static int do_rpmb_op(int fd, > - u_int16_t rpmb_type; > - struct mmc_ioc_multi_cmd *mioc; > - struct mmc_ioc_cmd *ioc; > -- struct rpmb_frame frame_status = {0}; > -+ struct rpmb_frame frame_status; > -+ > -+ memset(&frame_status, 0, sizeof(frame_status)); > - > - if (!frame_in || !frame_out || !out_cnt) > - return -EINVAL; > --- > -2.23.0 > - > diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in > index 850aeac445..ac32ae68bf 100644 > --- a/package/mmc-utils/Config.in > +++ b/package/mmc-utils/Config.in > @@ -1,10 +1,10 @@ > config BR2_PACKAGE_MMC_UTILS > bool "mmc-utils" > - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 > help > MMC utils > > https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git > > -comment "mmc-utils needs a toolchain w/ headers >= 3.0" > - depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > +comment "mmc-utils needs a toolchain w/ headers >= 4.4" > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4 > diff --git a/package/mmc-utils/mmc-utils.hash b/package/mmc-utils/mmc-utils.hash > index e8b2826612..1256f63487 100644 > --- a/package/mmc-utils/mmc-utils.hash > +++ b/package/mmc-utils/mmc-utils.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 ffc8f77233d1bd39ce4ec68835ad94aa6762624e4e96fb60102e87ba82db083e mmc-utils-d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8-br1.tar.gz > -sha256 c3165393bcd710624e2909327a6fbeb736c47bdbe66de1c1a364ac7324d3e4d6 mmc.h > +sha256 f6ed1cb2f02d49df4244f8872b47b22780dd634fa19d857298ce1b793752776f mmc-utils-dfc3b6ecda84d21418fb4408b39c5c71db4c6458-br1.tar.gz > +sha256 f57e3c6169116aa9ff06eec95734ca000e4d0196467bb221e80e50530c768081 mmc.h > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c847378692..bf940967ef 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MMC_UTILS_VERSION = d40ec535b9d4e4c974e8c2fbfb422cd0348cc5e8 > +MMC_UTILS_VERSION = dfc3b6ecda84d21418fb4408b39c5c71db4c6458 > MMC_UTILS_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git > MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 From giulio.benetti at benettiengineering.com Thu Oct 13 17:24:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 13 Oct 2022 19:24:33 +0200 Subject: [Buildroot] [PATCH] package/libnss: bump version to 3.84 Message-ID: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/libnss/libnss.hash | 4 ++-- package/libnss/libnss.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnss/libnss.hash b/package/libnss/libnss.hash index 026344668f..2b34cc1a77 100644 --- a/package/libnss/libnss.hash +++ b/package/libnss/libnss.hash @@ -1,4 +1,4 @@ -# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_83_RTM/src/SHA256SUMS -sha256 ab23ea67f964090b8b73c80a674082571c36e5f4eba92057ac648c9c1def0128 nss-3.83.tar.gz +# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_84_RTM/src/SHA256SUMS +sha256 9a387ffe350ff14f001d943f96cc0c064891551d71e1a97a5ddbffe7f1207a25 nss-3.84.tar.gz # Locally calculated sha256 a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4 nss/COPYING diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 1099ae199c..041b2cfc56 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNSS_VERSION = 3.83 +LIBNSS_VERSION = 3.84 LIBNSS_SOURCE = nss-$(LIBNSS_VERSION).tar.gz LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(subst .,_,$(LIBNSS_VERSION))_RTM/src LIBNSS_DISTDIR = dist -- 2.34.1 From mmayer at broadcom.com Fri Oct 14 00:50:55 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Thu, 13 Oct 2022 17:50:55 -0700 Subject: [Buildroot] [PATCH] mmc-utils: allow enabling of "dangerous commands" Message-ID: <20221014005055.746362-1-mmayer@broadcom.com> Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer --- package/mmc-utils/Config.in | 8 ++++++++ package/mmc-utils/mmc-utils.mk | 9 ++++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac44571..0283658a7a57 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + depends on BR2_PACKAGE_MMC_UTILS + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c84737869264..a176cb94ae43 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,19 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) CFLAGS=$(MMC_UTILS_CFLAGS) \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS -- 2.34.1 From thomas.petazzoni at bootlin.com Fri Oct 14 05:44:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 05:44:51 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-13 Message-ID: <20221014054456.C12B360888@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-13 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 9 | 2 | 0 | 11 | 2022.08.x | 17 | 11 | 0 | 28 | master | 98 | 744 | 9 | 851 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 313 host-gcc-initial-11.3.0 | 49 bearssl-0.6 | 26 berkeleydb-5.3.28 | 25 coremark-pro-1.1.2743 | 23 slang-2.3.2 | 22 ca-certificates-20211016 | 18 host-f2fs-tools-1.15.0 | 11 libnss-3.83 | 11 crun-1.5 | 10 host-binutils-2.38 | 9 brltty | 8 elfutils-0.186 | 7 dahdi-linux-5c840cf43838e06... | 6 gmrender-resurrect-0.0.9 | 6 libglib2-2.72.3 | 6 sdl-1.2.15 | 6 unknown | 6 dmraid-1.0.0.rc16-3 | 5 efivar-38 | 5 host-binutils-2.39 | 5 igd2-for-linux-2.1 | 5 musepack-r475 | 5 fbset-2.1 | 4 frotz-2.54 | 4 host-gcc-final-11.3.0 | 4 host-go-1.19.1 | 4 host-rust-1.64.0 | 4 host-sentry-cli-1.59.0 | 4 libsvgtiny-ea9d99fc8b231c22... | 4 zstd-1.5.2 | 4 boost-1.80.0 | 3 btrfs-progs-5.16.2 | 3 dash-0.5.11.5 | 3 freeradius-server-3.2.0 | 3 host-protobuf-c-1.4.1 | 3 jhead-3.06.0.1 | 3 libcap-ng-0.8.3 | 3 linuxptp-3.1.1 | 3 openswan-3.0.0 | 3 refpolicy-2.20220106 | 3 umtprd-1.6.2 | 3 zeek-4.1.1 | 3 alsa-lib-1.2.7.2 | 2 autofs-5.1.8 | 2 batman-adv-2021.4 | 2 botan-2.19.2 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 flite-2.2 | 2 gensio-2.5.5 | 2 gerbera-1.10.0 | 2 hdparm-9.63 | 2 host-binutils-2.37 | 2 host-gcc-initial-12.2.0 | 2 host-pahole-73383b3a39afe86... | 2 host-riscv-isa-sim-1.1.0 | 2 libgpg-error-1.45 | 2 libmdbx-0.11.11 | 2 linux-6.0 | 2 musl-1.2.3 | 2 nanocom-1.0 | 2 ntp-4.2.8p15 | 2 systemd-250.4 | 2 sysvinit-2.99 | 2 tcf-agent-1.7.0 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 apcupsd-3.14.14 | 1 attr-2.5.1 | 1 brltty-6.5 | 1 crucible-2022.05.25 | 1 dieharder-3.31.1 | 1 ding-libs-0.6.2 | 1 duma-2.5.15 | 1 file-5.41 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 gdal-3.5.1 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 gpm-1.20.7 | 1 gsl-2.6 | 1 hans-1.0 | 1 host-berkeleydb-5.3.28 | 1 host-delve-1.8.0 | 1 host-gauche-0.9.12 | 1 host-gcc-initial-10.4.0 | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 lcdproc-0.5.9 | 1 libarchive-3.6.1 | 1 libee-0.4.1 | 1 linux-5.10.145-cip17 | 1 linux-5.10.145-cip17-rt7 | 1 lshw-d76afbaaf40e953243da92... | 1 mariadb-10.3.36 | 1 neard-0.18 | 1 netsurf-3.10 | 1 nodejs-16.17.1 | 1 numactl-2.0.14 | 1 olsr-0.9.8 | 1 openssh-9.0p1 | 1 procps-ng-3.3.17 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rtl8821au-4235b0ec7d7220a63... | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 sslh-1.22c | 1 tekui-1.12 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 usbguard-1.1.1 | 1 volk-2.5.2 | 1 wine-7.0 | 1 zabbix-5.4.9 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/33d771d402add372fa78d91d09e19e1744f0a7c8 | mips64el | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/c6f1e0d42b9ef2b26ae89069af709e3b4f398f72 | microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/82b5c7b3f0f2b704eaaeda53fd157bcca998740b | microblaze | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/47e87bceaf6b74a01b3f41767a34bdc46c3140fc | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/88d8f8e061b99363998853fd90e53e91f01f4c12 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/aa92b469680e6b7f03d3dbf6e041a75e7096842b | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/078a2e33cea57a9354b3342c9c86450886c7bb5e | mips64el | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/8190c8f6f79c20d0763e71727fc6660e2389a9fb | x86_64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f47bc37ed9a386b7ed469a3d74c9a77046be8c43 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d0d931896bebbbaa8eb80659822d54a3cfdfb5ef | microblazeel | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/16036c1695d8d0face76c9f023447a3e2d958054 | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/a083f9503a8d364609d690b058b9e0c0450b0ddf | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c67f8a0a877524e108aedbce03dfd5f1c11afc98 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1d2f5ea7a40f7724f12a48ae4a1aebe82a738b90 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6d563719735eadfef0f03565d46f62658f6cda24 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9d5d7f9ccd2086d238b16baa6b5c8fa525a6d4fa | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6f5774c5eb3ec8dee354d4ed7de98f9e951e2c82 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c1530a6a3c6873b73f1dcdf8b79ad46e59b1f9a6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ee9cf727ef8029de46f73e4da15ae7dde520e918 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4ee63da4339714bba6775a0d85277f94c69e640e | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/122aa4495dab770ce5f76b9402906e703c937f7d | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/af62d5f0292118082e4571f48835d92e9829845d | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/87229dc740a137cc3d41ef603ce832ec68acedcb | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e6926f6a0aa07f8bc7f7ac587326cc92a8fb5902 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/14e3b942bde1ba6670493a9bc657cc3ee96e72dc | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/30c5827ac06bceb0d1abe2009a4e106cf349d82d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/46ce671d6c6c5361925392b651a2525972c10b23 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1cfbe1960af15feef9346ae4c6dac1a8f34b5a7a | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a11aef4f57989f11cc651370b1821bfe0e20eb2f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a295af5439dcb777353900f2676b04ccb1b39972 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dccec4d5f0e2ae5b797758140be220948a963893 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e300d0bdb8a636a247c9dbbe78d6527443bf4ca7 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/331f8dcbcf702828bb37d7da276f272a87357d8c | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bcb73e3bcf4beccdc6e7051e01d2fdc2699695ba | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9c195ba659b8b357e2b116526e4380d57b365e9c | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1cb15babf50a93d741af9118c450c59fb2ce3a3b | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/93f1966976915f298acbbbd8d0b39c93dcda756e | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b2edd82ab1707172bc51d78c81e6088df5024f56 | s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d35c7e5cb2cdacd677f3a406be7029f026614ba2 | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6baef6d4925b7d408bf17aa6072231390ce73e76 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d2bb3d33d7c00ba230ef0621b35f3a4f78da1cb1 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e9c127691cf82af06504592230a9731b909923fb | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4aacee5341235370d64192c9ffdefb510bff9099 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/705e6a64c79635b518941945b6681aeb44c46eb1 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9513acea48c1f26d83674a546ffb67d415ac39c8 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f831ca3322530d1553f549740df414fbbd3b64c7 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6d0ed7206f71fdeb6151559555432ea30118133b | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/aed565eabd8ab97d85f2990260a1fe867bcb7a84 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/85a04498d9aa8a2c48063c9b243dbd3365c404b1 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/df6487401f4b4d4f4e6d292480118f0dac41b46b | ORPH m68k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ef57528692bed235f8d36cb84c46c77b9e4664e8 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a91182b332d961cdca57d3dc8eedf1de9a7cfd57 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/09fa739aad53f0f9c7fcbfec436f0d8f4d715266 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/261756ae7e7c3a8da1ad5b9b2d90def88aace671 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8e995503ca11a58303d7727a9f3e1e5892bcec47 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d2de4656673d1f69991dcd4d1cabe69ab03f6a22 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f0e018705be832eff59c4b9fcd567453f9211bcd | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/64eee73e9611bf1814a2fb240997e544172b7c50 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/98a6a8a4c9ba66ad8b7b1950f266418ef0840b16 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8968fbcecb8e848b27786360893b04d11640d7f6 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f2c388852262822429aa80a99428fdf767b33401 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a75669b8f8aec47333bcd91ee838b4db0a7fc57b | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/280a57d15dfa9c1da93dbfe34b7db1c376133690 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/78747d2db8b0b2a4a4d7da4144173a073e4afdb6 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/43e17b874053df59f1f6291d641f9efa891a7fb0 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/39177eadf9cdbcc72b3246fca15ae4ed6a0d8e76 | mips64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8cd95854f98b9e5cb428ba51beca6c909e4463fc | ORPH arm | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8f1964a2e2968337d8d766940506f88904104f1c | ORPH sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/8eb2a23d0ec82c7d9fc3b423c66bba268a4543cb | i686 | brltty | TIM | http://autobuild.buildroot.net/results/efc40d989552a507d122c1c36d38b0798e44af42 | sparc | brltty | TIM | http://autobuild.buildroot.net/results/cfdb2a8fa683275a7a13f1aae6dcfef61fb8f31e | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/a0879fbe10e70033729a5f231f8e83df16f5ef80 | arceb | brltty | TIM | http://autobuild.buildroot.net/results/393bb6806ead71c79a479b9d89e1bcc93d4788d8 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/c7cd908f20b6a1b067c383e99ace02753c47770a | s390x | brltty | TIM | http://autobuild.buildroot.net/results/f17f57fda0e2b4fdf47a7c60ad58b26392a0392a | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/2545d294a70ccb280975ac997deb0664a829a935 | microblaze | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/9147f892f7cd32df933135254ab76a4da9ac3d09 | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/7d62214d64f69fcb8d393dfa1e6c47d40c3a95d8 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4c6ba2b7d29ed4021377a9539eca53b0dd36de50 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fd969d98dcb472ab0872457b26a27051b432d537 | ORPH sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6801a81ab45abb654f484817b254451b9558d46b | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/df1069c739cff57099f0b6c50ae97552bcb2f2e9 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fbc9a26c23fe7781ae8d296414eb65b300e7883a | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2df02911c6a9ce542ec42e8fef5f2100d5c738bb | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f7ded22869f638f40ac481d8b3487034cf0e941e | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6dc1345379c6051d00d244d065c7e9f836368dd2 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ea4a2fb566005f77e50b19cc08975ae8320116c8 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c7a658131829c4a01229b3fad0ad3f56921e8df | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bbabaf34a6dae76d9fdf9bd1c34046cd0a84c69a | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/83fa408f4fb54ba42556c8a9a0debafd3599c240 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/71b25990d72a64eff78752212cd871102537f40d | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7d254a5a69e85f9b60406f44aa5bacdd054a72c3 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ebe6e66dabcfb12c2305bc8252a8f30d239c1f52 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8c8a3266a68783a28e63382ab8814081f8d62d1d | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a878fb2910ba2a248edefd674766c8be370dd713 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/440f53d1b34cf4ef78a5cc4fcee668da47cfe99f | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f0bee5220d1de2c4801a89c7c32d8f1e738e4042 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8658063ebcd006a8dfbd0bedf31c828a9c2c4538 | sh4aeb | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/7e03c9a1f15aa0be276d50d61db541e9a68427b7 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/3b53cd611bbed9dcfaf5b5b8e645355fc6c2ec8a | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b6c766225fac53369b49aadde71e1f482cf983d8 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5d1f799ad2c3d98716c9d248eac83c69b247eab4 | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/15e5b1cd2056302870351cb4f21daa86eaa6a7a0 | x86_64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7eb2833ee4d20a8e9abb14146ef0364107069915 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0669be1f629679a106abc8cf5baad4ad1a86653d | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6e2058a194e5ac77b90c989b1ddb30d4fae99d6b | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/d6bb5314642503226ae262c0d33401a94308bea8 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/de052551ad7358846e10b83dd2a27835f7657a02 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/480d1ec63610edbd8f40630a10926f58702e033b | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/076e164d5b985ce5b1e1e6584718b057ba44cea7 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/25c4cb0b921d485388b228ffc7bedee130d01e76 | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/20258df5abf4d41ebc62ce8c33e5de4b10d651f3 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2ad992b01d932be36539619173d973d703cd4f69 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0b68f5ea5ed255b72de5017edc32136eb5601cd8 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5bd052dab21ca5898703e5d820fc5a010051950d | nios2 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c13b4b0c321967900f8463448833be18412bc250 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/cc64c6336172682e88c049e6ca7e3826d18f6275 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/dab763c96f764a5e5d398529df4ddc0f2992d085 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1dfab53fe2bc7ade6fa5a77fc88ff153d860214b | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7ccf59f09efb9c25ce32ce0dbd61b94abe524ce8 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e482b8945eb937ec16d72d65fc1c136522319ad0 | sh4a | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a0623aaa662425231ba3805ddd65d77e90ed4458 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ab0747f75106d69bde0826dad4e20892a592536b | x86_64 | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/057bb053ac6a51d8f925c6e6802b9c0a421719ef | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6a90da696f7da7eabbf7d7760bd4615861fad293 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3dd1ec54168ff36e30f619b12d08553c40641b95 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2024f7dad7b3f54243ae532680eb10b1fd326066 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4b45a2262732b26f64cfccc007b7fb8e2acf62f1 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/09ca853ae7b78c43a12814a483ef16f0b9a7c87d | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/325094a53ab2d7fe53f373337e5532c7ad9d7f2d | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2928094a901a75424ccc3395ab63f947959211b6 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a415d355046a24baff0fe942d8f597161a8e5e15 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/25e27098800541bb232715b24de46976a68153b8 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d15c3d5415818470820fd46edf1fb0be4043dd33 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4b549a61d739fe53453d31554dbc8b94cc62e350 | sh4eb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/08d13af02df9832badb5b9a723f3d34a9c204c30 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/327650a90cf97544d2f2e5871e603148c78dcc29 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f936b3f272cc0b3e4e04229a1f0d45327472d94a | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/074d5a6e2f762498fceea2f2142f61f7a262f48b | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4b46d424cca097ab8ccbe92d3f1f19f4b03d6e87 | mips64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/93f65abc83be9ec2f872f6c5b9f9c82c2b3cfc83 | ORPH mips64el | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f5d492998305eef42bb50841ba43a3dcb4ef8e5a | ORPH or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/43606a9b49b069e14d3ab24bfbba856e3db53043 | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ecde38f7c2ba05106c551594f3c208af7b5001be | arc | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/98b2be5b09d36a7e4b9d1f95c48b75c597a6903f | or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/62319c1aa3ab05c3ee346b6257374677463e2223 | ORPH s390x | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/3457636f3233ab76e2410a822fe418f430647494 | ORPH sparc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/8710f9d41aea0d4d52150d8c684c27f57af0b577 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/10930fca3df331a2d779e8d912ee98cb3adf88de | ORPH mips | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/d64bfc8bbeca9c3a3c39c3d55755656115df3245 | ORPH m68k | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/e4831157dfc524673978e9b6a1f5ee0c7c86b822 | ORPH powerpc64le | efivar-38 | NOK | http://autobuild.buildroot.net/results/7fb33da8756fbae83979412dbad857a2f2c5745a | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/94262a58e17385a314821974ca2c4c56d6ebfd65 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/2ce7ba02bff63429d9b1bd68dfbb6c7a46ffe039 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/5a5d9ce6daa122618a754605104016ee0474c516 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/47090601f2d6da3bfaab8cf568091394f33e373c | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/16aa524b2eee7c7dafef8b4907d83d616e9e92c9 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e8445985ff2d4d98158471e705c3ffeba29b8275 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/3fadde7a092302a98f914f5b267620a49c4b63ed | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5aa11c934a8024af4c49f855584e648b00ce6d40 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/21bd48e22c0a0b3f42a41c457df8755e2ac633f8 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/cc24782bcf146469bdd2c6ad284f45ee85314031 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/48cbc73f7377ee2ce222d2845778d1db489b9484 | ORPH arc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/45b027cff4ca87970eac5e232a75938c486110b6 | ORPH armeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/c0c5441a87473be1ac4c846890d71d7cfec3fe5b | ORPH s390x | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/8072df924f87fa0c989b4612ca38c1ccd259e8e9 | ORPH mips | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/f9d67d78b9dc6ddc0dcab3597a0553dbe6d4052b | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/854b9cb1d35ec9654a082c54ce55bd791ce13115 | ORPH powerpc | flite-2.2 | NOK | http://autobuild.buildroot.net/results/242d09acbf0d0cbe86ddd536f59151aa85047f7a | armeb | flite-2.2 | NOK | http://autobuild.buildroot.net/results/786997633f31999869b860a1bf82bad988bcfa3e | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/2d3b783b0b18a169c64e159435842f2daaaa38c1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/e7ad081098fb5fd33515d86d1eee74ae285cd163 | x86_64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/00c06413ed7b77ad90ff548946b8a3b44c35bbd6 | sh4 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1bb5855159d80efadd738215b4e2b097168d98f1 | mips | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0acdf45e89a02ecd9fe85618d62f0c73d6ce3ee7 | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b62e794841adfc49116e6827fb31227d1ee53a24 | aarch64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/9cd213ce2d36f797041c7b21044c2b2c223dd546 | mipsel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b088e9649d5d4c54678b9efbda49d45048cc15be | arceb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6f46ca23da2175f6cf4f1fad466418fa157baf4d | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/03c8d726ee27e49c7d8c917bde328d5623aa9dee | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4ccda309d4d720315f0ba91e36bd7d4530af494f | xtensa | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9c3e501c567d2062bb3f11347a35e34db1932ee3 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/691f2e37fe84d34d41cc5ccdd4205615b4b88800 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/946578880b61227d6e878a98698eb4b350f0ece0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5ffcfd92ac94c4a29dd42b0b786be09439e6618 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/900475bb58dee4d82a5a6951167083b68461782f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/88af5266ac66ab356072a063021b5994138f8d97 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/52f69f36e2032f99c03be80c065d2b9dd58d6ef5 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/66cf7d339d2398578c90f14fe15fb34b7d6259a6 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a28ccfb5d8c86de96e1b1d0e547ef3b2be711704 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ecc27e68baf1a8debe432cffb921bd2222743c9 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f07f6b9413595fba708f68592279716a7db90ab | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a4b4ec598ca24149930863c07499af79a3ab2c79 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f47860f8c30f19c3b1ef9f8ff6242c47ff17682e | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/186f3a87c06ba2d94080cfddbbd03a6d6d3b51b6 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5a61eda1edb8988f92a25974120ddc500e953746 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8989a375365c0c6c0f43c1347dd79f62f782fbac | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a75786b22a495a6f33bf2cd476049f1be644600 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e669a2a16014bacdf8cfc0b4661455623eba1266 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f295ea5edfd660888e885a3bb69d2c5f656e7fc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/552f14324b4ee8357d786f37a0bd74b687e09961 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1eb7e4f47cebfd2be4804785720126919848c228 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/affd5713ed13fb589b4b86d1af8e9b00007e9634 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9bba239aee3cc98e8b7627779b63bbb6386f5155 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4787ed65c06251d8c38cffa0efb9e394ffdfb123 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5bc7e72a6fd36c9638daadc876c7126a56ea1736 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2bc2d71dccd2216b2cdc16b1ba187880e0689eaf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfc4697e8c1b50217e3f79de9be6b945f6780191 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55bd4220677f0949eb44f919fc80a778d23073e7 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b70dc200405304fd1e30f5e118c843f35b882d0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/14de80715ad90335cfd8050c52a13b95ce1f0580 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c6c650e764ebb23821ac2e07a5a5a578a5dfbdd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c1ff0816c2ce75e84b6e453695d59dc8ce1e8ae | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d22830030c0c5760077dff4bb8e780f89537166 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f16073bbc5a90e8e8ac0d3b2211b66415b70e130 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6a8e45d8212fcac92fece0e785350da4d489ae86 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4863b9928bbe1d481ba3f8f505f660c489a1487d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d617f367713d730038b74f2a6559b2260941964 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0b36e7e652de51f456b79f6464f6381aa50ba38b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d01e82d37cf9d5ab6bafae5a1f3a11c42d7870c | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15174f9f1cd7b687b25097b804e767916ac27833 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a26700fd586ac4e21de5677d4ddeb38f37db0415 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e9c8dfac3bb7598b4ce259239b1ad2d8cd6b763 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c2ce20864ecc3548382a4eb034498b48b892b6a | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1305d777c1fe2cf04a3664a0011717141f2a2573 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2480f49fff76f1fbf7b3e18bf22f35593565297c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1aab1fe90fa290834f03b29fa19057d35415cdb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/435bd1863ce87162e2a7045791f6be68bb2271c8 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c5e0d92883b8a4c3d48241fc38975ceb8af9cac | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efe503e720ce321574f1c71545b5251a4961a220 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c0be4168a6b58f47d0791970b83f8e4b180dbdb | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8bd37422a6c4f37df5d19190c7d8d3e49b1556b | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78868cce91304b6f7673b5b13b51558f42a5ece8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c574590dea2bfac143445b5bb563435a294cd15 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18ccad863ddb7b436be5f44e42a24c4caaea72e3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/216cb83906ce1940a0ad02613c42b9cef9f9bbdb | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/81b5ed81be62af07e26fbbb1602af031d98eb247 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7986f65d73d678f26e8c92e7e593b3a322e96079 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2608846534ba6248039bee386ddadeedd4f03cd2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d60bb62267b76909feff42c92f9cabd0598fcc62 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/790c41a7015cc420dc4393456df7d93fda047efd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b02b86cfe28b3ca0db016b4bac690d4b0a505065 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8a417b920ca7e76eefaa55a97e501c64e3933069 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/895df69366faa4d4f9f3a85b08555ee99f979423 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99047866cdc2ff5a2207d7a4358021ea2a0f468b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5a9f1b86db3f54235a4cea315f8cf8d33e49f96 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8100ed5f38990f19e7878c8f196e380f5c90b70 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9a8137f5f44519ae54e7f08f87b4cb2ae7062402 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efe3fbafc4f376f8f3bd23013dea8321e8c91809 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72e85a7dde9e9520291f4b90100611a8d7b207e9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/789d13bf60aab6d3d157ff7075c7eca13fd9835b | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b30540296151d91f6b371acd675b8583e85de79b | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce4e7f1bcc0fa0ee20e55485fd95def43d2f3abf | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2dad048942b8b2ce34b9cad7c9dc422c882830e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b910063e4fc01451a9f11eee333f9899ada7a88a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/631e41a892d3fba0bf61ecfeed0866e3aa7559f4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c8e14138df0dd3c5a01d7435a35936a1b4b83ddf | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28b87000e4c2ce157319ebbccfaa887f3d9f2197 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f91f5d0278d3c5163d1a9ad04fba9f36ad9e8d83 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f01e70f6ca2306a6717604dec0256849cebf9b76 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2cce8a4e7ea76a9359da5d7dee0369c9a552357c | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/64ccd27b243efed942ca5e2da25c47fe8cc1b662 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d34cf0b6fe3907548b04f6832bd1bc16b92b6824 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65bf9352f1aed1fa9209434d2747c2ea6acc9ea7 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f0065e53ca8527a1baf9adffbf1a9b034aeb3947 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95f280bf4822d488650163c4e508b2252b8b050f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/665cef8731e0366a908b0ee2e417762ed6aed905 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30a0810784794be028024655ebc8b8260ff40828 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc00974a94dec96f1eede245fac5451594a8c64e | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/834d83dd3b59e11a40c9948279af8ada46598503 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/addf9ae9f90da5d3e5e1c08b7bf27bb147c31ed1 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e9fb859a794a36b7ecca0f73d9d19044d8aff46 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc4ab010e5997b5d11de2c1d16141b81974c670d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5c02a3cf462b8e690d96e3dc40c486d9049d6ee | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bae0ad877fa16ac78bf5f6831a1ebd2ca0c8a1e7 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d9df932805ab630af570aa6bdc19b0052ff789c9 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63deb3e9037e715fcfb8a66119a3be627d154ed2 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fb8e44e13c8eb80459ce27b35e0fe023d7078a03 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c54ea602ec6529ebbb9de64b39138f0d2ab7d07 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cf0574ebf50040488466ffe4e7030a10fd26f0e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82ead78c47abbb1cafa36ed9bb8afdb9c9731f0d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1a13f734855ab40b6183b7a9f0fa16f3c7e1599 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33bda0dd4dc8a98e67fcc433d4d36ce12f2ef343 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0af4b9aecaf4ad19eb0be6c531c7f9c883adc417 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1090443c507cab9bef533d807dae3888916c545f | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09dc2994294b1d981206790d41637a4a5dab621e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8aa35cc7c11de9027ade28c8b7e34a3aef711357 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13ca47bf4d70df260c11ee9593ded203490f46ea | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bbce549454293a5724ec9412ae801a8a76e280d9 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4fd18c8f1c4d9f523e08569638f2a1aaee0b3e0e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2e0b900c39ffc36cef536ebd76431f9026ec5f3 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e5886296a0ea81592ebc3e548ce78ee279ca1184 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29125e66aeda8d11186211c634d2a03933f27746 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1542c2e99154702745fb89853c2e654c0d45a23b | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1698e11220abf9546c496fa609f03faeb75f41c1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/348a4c414d8482079232fa4d2af56164f032676f | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0094526f16be2bc56fcd90efdf0ec127607be6d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a24081b68af4d90c93527b8700bbc07a32df19d9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5441dfb60250509671f07d50aee45757ca479075 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/daf6cec4e531a2ab1b9ec9584a8f9dda08ccd5dc | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8639637dc0c92bc9150fe96ab73f57f88f7f315 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c87349cd47747c2fea76e4f829d959bb3686f92 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1783576b75eca525eec28337a3764323cf3bdc84 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/029b81a025515ec0fd8593217eab5c30cc8a1418 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d61a6a532172d1686a385ef98a0165c0438212af | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c2d5eab422dcc464c23942be6bbd01e273fc705 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d321bb0a2888f8bd371f8f9fbd25ddcb7f41af5e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68ffd836216b5a075be4e4daad44fa7aaf558c84 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96046aeaee44c786f8cfe1ea96beaaf1e56d2992 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/692c6d2f4e848674715d32b4f4c9f9fd9a95a70a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56f50e005fa61fc5c72020febcd174d49737dcb8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e64b4126d25f78a693de35da8ef9ff514f4d79a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a47635da259e94d671cb09c91dbe6c186e76d7a5 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cb839d81acf484ffdaab5d6bf6cc385affb4ff0 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d285374b22b437206d4197cffb1f626867ede96e | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90ca5936d188aa47d2ad887d8c99ecf9db4c866e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8db33b97e915a6516ecda7cda9c85c0cc64f779 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/06ba33b806a08dcc1106c7c8b0b79b540aab6e2c | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afe23afe44df97fd3e180dcda367e59c1c71ca47 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d7c8c0255bdd7f1c113cbb92dccaeec0e961597 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80d6067e7b1f01cbbf2243b866837a4c9ca39cc8 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c52260564da3182fcd45e00dbe8f27fa29f4c42 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74703b06993022b9af568dc9f2b41536e4852ecc | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d03f67334d3deac593510f432a6f4173538657f9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8cf32618b89764317887b7a6696db3b44d98005 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c80dfa0b17af620150bde305bd8ca996164ea6b7 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a495bc54db19f6cb9efc0a60153a64cb69c69550 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/805c24cbdfc1381fb196816123ca932837ede238 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26c06c477aecd1f4cccbe43679ef8b26ead3e6cc | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3f2913e080e71ac86f03c0621ce5cdc2494db3f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/589647a33dba41904d4180c9af347092bc6d4104 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e43b0c1f7e134f5dc1f02e4614e566e1f15ab1d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3760a3f32b677feed08b475db3e8331d3974008 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2e2c03a40148e88621dd785dc9bcb2b8ab7e642e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b09e25b9f6d6073a134eed29ae219d0890e1dfe3 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68a0492451544a59d04763496f7c74cbb9cc2bd9 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9b5b9e9f0aa76e703c7171bd3b9a30c57a65de1 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36d90fd29e9c47db25493c06a3adb371461b940a | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/928993285f67c883f54ad35237a725464dd8e25e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ec10be3b1dfb831c4e4cd6b641f81554d7446f8 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97a6b40aca6c1c42360d661bb752989df8d23496 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/56fb651fe09cc78458227508631fa92e8c0edb80 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/127fdefa1aa58217013c305105e23981255e6dca | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4725919c17dffb2d26b5b70b5145699966a2ad54 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/85058058f9ea743d724ec44cc5e5cfafb1d7970b | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/301f4119334e227336f0d407c0941ff189eaede4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4ba740b01358e570ddd83c5e4777beb57e507e81 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ce17f98f0c3f0696e296e7f2e1c315ed6ea48102 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67e8839e524195ee14f22a36a5f40fee54ad0fed | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/590e68e6796685830829ff91a4ceb3e3d276953d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5467f8b0feb3571b1761913dcfa3670a4a708df | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bce50b2b10097d3d00b698314c198200e7fae05f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/247946af28501d77a6c132483bc4539a83048d50 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d32fcea904abffd5194e4a60450be5ca535cf9a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c08783851952206b437529801f21c4ca8e89a92 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58b15d41fdd3a5cc4982b0b202175103b7210c6f | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/118832aa57a8e3eec2f7c22bce5c6e4becfe00c2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ea28684c9bd9bbaaeb53aceca105bc687cc32a3 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c688c88782fcbd93a1135785b486b3daf22f34d4 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95577d270c1366d7cd68c999a2f5aed5e812374d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/981b762fcc961b2019984f03db8a3befa5be0bd0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/832757551d55f6d73574b4969c6b6c0f1761c8ff | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f502f27b91dd3a8e4967305ea704e0a76c925f87 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e424f9d5e9c69c645086ef9915c6d626ce76174d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/35f5682e96a1ff3febafa4ca098269254361bf2d | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12a399d2d39f9ce1cec3cb52e0b9645a09b368b6 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f1d8411c315474c17ae290c3ef9f67c5dd349f5 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9c386b01cb5657eb28127d2273bf6f7d3c6e7faf | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c14ecf525f93b6bf18207bbfdb1e94f79a981760 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/195c23d952d4f59de723386213be811eb733c4e2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2f7792e861d349c51a4ed314034a542aa4a614c | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b9e9ec2cceec3db7ae24123c29f075033325f16 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f3b0b0cf1ac319c8ddca97b96249651feaf2e3bf | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c1e40ad503dde1264114442b1c57a0703a908f9e | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d111368e1b5a58be095db5321c4c696cd9eed864 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e336e662442e7526c1b2a4bad54a50248db690e7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4d8dd0211972ab11b887f895aafd73a35b936c4 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ea9bae5d05ce4a31f18388980a0a016b4e2f21bb | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edcd3a7e03f3bb63aadf29070616633ae0eaad59 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/830856ae5286ce793f085eb97ce3b6ef3cd3c62e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2d00d73466fa05f1dd3eb7da990f62b65830b02a | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf4f2cdb0eba9f32cd3875f6736596f53a0f887e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2cf5b1f6ac510dcae7b95ef23be1745e2e1cd44 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/740e458804a33749d68b78be6b1918ac35306ecb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/801e77d4c76bf18f51b1c2d6edfc6ddcc31ae7fd | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b69af8db0700c31cc3de440db3ea613b7998786b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/683db75fb70ed480bab61754ad3fe364a90aed87 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c9db593e4344e4117ba80d562469a93244fe04b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/214fc96a516a415685176ece0e63e029c902ba1f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77f31f963b279bb42226869fda8b4b3bb106785a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f9ab2961b315cf48fb8c9b87fa99731e2702a5e | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7de7235d2a7dd1b5d67373e5902cab8d6b93207 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50568d030d6354f4c130785b6d3a0e5ae98c8f1f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cbaa4000c529cd909448e7d0b6a681bc13c97c0 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bf8150e302745f5ca1710f53e9dceec6a4e97b75 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80715a3ec26ac3cea7d49a081d7457e69067b4da | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3b03843f57f2d7d5388cdc23e12e8c14d8af6301 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e9233a79b06de7311f48fd6918a40466b58dc92 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0ac27121bd4e8c343f72360ca6b5abb89f9e9276 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/48480fa206eb9574f0b7760928bdc33e5052f6b0 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c7f5576a47e15352d15a20369c38c4392ade954 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ffe14686d85cb746a3deab279319c31207a70ce | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5fbad6a58691427f3fb7856f2fb1f3e43f34d985 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/72ec9cbbc8288b26d4ad771e7c38656ef49f0f7c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d9e5088f54936f04a270a4aba6c0ffd86bae9d8 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98933660f7f0cc43a2dc19346fca6d7733085e5e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/814cd98fea0cc361165cdf916329d91c7086180c | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fa985cbbb0d841f15d83937b593884c45dcd12c8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3bc5838e97909414fb735eedf6b0d826212a06ec | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a91823b650d6b1078eb7b3711bbe9939163f4c4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2f4a7837ba38542eb019cb353bab55e9846dd2c | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a58f043b4c1c67731469af5c3f7bf8f77c3d99c5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4a2ae71da6caed80b15578dd065a5b122af8db4 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a70d8d19be69dd3e30421cda6f4a5a7b47482451 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9370b0e954d1b075f9f711d09752204f63d30501 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0390d178166af6553ffca5cf7ee8d9a4d41c7922 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/743481099de202fd011cf6ef93882fcbb40de2f0 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27eb48f3efbe418dbdbcc6d1176fdd95dc9b6f47 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69b181730b7128b6bc594653c2edd54c92e0bba0 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/124c7058282eff97413a52151cb33b3a7ab1533b | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5de6900e0bed5dffccb379c51066621bd4638294 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d7813c501dbcc759d1cec81052ba81f9c3ea98be | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68528b02434df7c24f22c9c130d62062e6b3ac0e | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34f62aff693cbd496b4621e7b53dd9cec91b6f32 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/36d08e2c4e84b9e53ceb786396334a9d24ab9415 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a562904d7ccf3f8c9f9d93cea6660a2a94842a19 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/956b0116f0984e9a7eeeb0c84dfbdfdb49396cb4 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/707d8be35162cb3fa2b74a3a1ba8be607a9f9d63 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9313a17c965bab88eba741cb9d04271f959360e5 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1c4799e3056a6df82af3e229171f12b6ac768d82 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b350683de515b4b664d6db0a6f4128a63757dd12 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faea1a09f1a270e92069a3e61cb20198010e85d7 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4cc73409feebae5f6bc1aa0aeebe4e32021e07ea | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a28dbd84c454dba6be1ce642cc11e97db49536e0 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8f71b3855254ad08e0ca3e282b0e53b61caf819 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/404053ca46ad750e061ad2c987601c10ec83e983 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e131a63d299bf8bc89d7044faed4c317592403f8 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29a6c6599020b8696889cab87ca7280a9f96532c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e41ff352fc5cdbee07d839b986641f0024a51778 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dad1b7746e0681bec7f9cd56d5a037a50977c459 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8625559d4a0468dfe88054be638b543a2c69d546 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02957234ad46aeb1a236b17df15627ebb92af2e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e28d94113add5c6458bdc8a0a1187a90340ed9af | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd3f8ab88b19b0804552aea040ca1457e780ef28 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7dc74e94bc88f61ef171939b639323c86aa95b4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de687e6aae58a9abb2a58d3a7fe770eb201e7da8 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d81f828370f6585c11993c564e355118447351c7 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd6cdffa2ac15f68fc44ebe07638f81ff6803705 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/413e58755f6d90f2220bd81469a9a2c8902d2af6 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/017bf741160e520733b77095bbc1656d2a133462 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0be1a32ec9bfcc174797be332d80f7138fcac3a3 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e69fe7fa963d6ffe52429167277e3a8919c0870 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6ab328a61afe514f2eb73cc3c970f424e9aa338 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27d336a6d24e172b5915a5031ecde1af26f88f0f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97630c91e3c9aa2f7a094de3a6b0d794b77126bf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6d8fa6c1dadd8fbba984552648aabd695844e22 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91adc1a4fa1b27445747e7ee428c8073f5a1c176 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61bf941dee47b8d5504683b6178728f99a9f73c9 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6aa4575fcdf400b5a38e883fc8f05442d9a041a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2eaa12413b5fe361383d99e906709d4aa7a1e0da | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/82e846bc8ad4b71a2260103b9e9d3322c9f3d5a0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29143bcd61859b14dea5686a65d4ea6f63ae8936 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80da72a6139f5e743927301a1dad6599d227db12 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2da9608d7ea86875c813cb3ef67921f2ff008fcd | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91e232b0c4b376f8e976976886521dff3febd455 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/12a9b2693b79c3470faa3dabc11ea1eafbb5f058 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0ce7cb066bedcd3e9ee8a51ca0716c8dd6903ac | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f43a12759cdc14db24a8e8892ad65c16cd680766 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/016abe55dab2a7dcb36ccbc91ea9177c87eeec5b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f5d893217782ddfd689821cd912f449d7ee95cfd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/511aef5c4499272fbc858bb383de963c72708b26 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/90fed584e6ad23471a38f2ec034bd9cb1e9dc3e4 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3b3c88113cd2e0c916de2694855f0f1b67e7cc9 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db262d8cf044957e9f2836c8370d5704b80af73f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71e57b701d170ba151c06af72feefd73dfbd513 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/65a41e92c01327bb18d80ef61ae7e70c7fa4a0ca | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d016d9d1168596fb8506a309bfda9d3861e08bbd | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/218c59b5963f16cd87ee3e84e30a3e4c627f132d | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ff05806d960b6266d66239f3dc37daa84adcf35 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae1e2bb335ffd05210d3e770fd13b33f98376785 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d8cc4c3ced75bfa336a1b31dca804aae5fdd3a85 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8d612357fc51b7530dff16735fd4b2134a9024d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/742fadd4b813346911d5a234d5170d33776ac05e | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d197c450053a868208abbd7adb0f31b6d1c2b1b5 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e89e5dbb2c42a5970abfec4c68fa5e72a13afd10 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18fb21817e5fc8e4de5c05bbf50b29acd4bf3848 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d493cbaf9b3b3a8d0153aa1c057c7e0c3b41c54 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7640549f5c24633fe1c06d9e0548bbf4a616cc2d | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4559fc7821e418503d40de8707a59a2c5cb3366d | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d8f9de61c831e47e06bf43bf648cd3886d4f6f8 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/26f1fba17068681b11960e4f558c1612b244fa53 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/651dd4f417889409c927f3636363b77337949587 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76760462839ca9fc946bf24fbf838af6520700c2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6065f04afc8e76708c80e9556bbd49631a6b681 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/91927aaf429bc4db4468949bc3697107032e8360 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71c253d9155bc9a07bf4d46a8b2e282f184a3f23 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/162f0b662fb90239a39b1169e9ad002ee950907a | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9c0d7a86d8c5a48083a7427f605a2d02414ce693 | ORPH or1k | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/ae31c80bdfc42b8939ad8d0693a866209d048ec5 | aarch64_be | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/09f14b8af5e1a911f270b90403d1a331df1aea71 | mipsel | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/fc5be395d653272a79e2bfc736ab386edda5a5b2 | sh4aeb | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/8ecd65e3804c121b106f3b60f9c2cde4ed4213be | sparc | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/0833b42f2a3cbda96de49169bfd6a2901f7cc715 | sh4 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/324b9f948256def60c5d2a3a124f8fc69fc79edd | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d6dba84dc392b03c9325af0ace68b171603a305e | aarch64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/b7addca60d0fcb6e73bf7f840d6a6290f38739f7 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/fc0223529c1007e09211938e9af6c5151ab0b81f | ORPH sparc | hans-1.0 | NOK | http://autobuild.buildroot.net/results/942caeb90486cb634cc6d71cfe08e98dbbd8229d | ORPH microblaze | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/de591f7738b5b72c8f882cb1634aaf463d48e9eb | nios2 | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/7423eccf35618a096735ee446ca0c41d6cd84571 | mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1fe7ad524fa1bf98fca69ed79efcd3d566331745 | ORPH sparc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/67b9f433b72991268e89bc6a449ca1d294b94189 | riscv32 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/ed009a84cd192ea8d5a7c6c4ce75dfe9ff94005a | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/77edfd2bad36e88c7d532e11094ea4bdb9bf0554 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea4c8a0d40ed8489817dbf2e3ff7abc909bc1531 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4ef0dd691e72a6060b5c58a1904fa2e63928505d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0d3b37d25837dbc2527b403676cf9e9bd503ae53 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1446fac68520eb7680d2585eb3a8132e8b8f0a45 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9c3963f2546ea274d0b75d47b93fa4f08a056592 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fd754273b3b401a6dba0ac99c5157d086e98aba9 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/686ad4c025763392897e26af16304e5894dba503 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4906b891f956d2370b96e8659e60a48196799b83 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/86001c1c8c28d761d9ec218914f71fa91916a7d1 | microblaze | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/aa191b98bd886305d0d2bf3f7d5effc8dbf4069a | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/866e0a490af143970ec4424249e17e8856d0a797 | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c6bf26d0ea46da84b683ab519c4c1ac6fb7cdbee | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c5da7ff4dbe1f2d970cd29c4782ee20d8cc2dc24 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/08c43d57dd91e292c9828a8b504501575c10352c | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/45cdaad1ac490e7108f83ab24798737b25898520 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f1cd4b2383f3c68f107ff3fb8fdb234ab8a7de6 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5f953f82ee8c04617abf8048325e0a7c4709da20 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb246f44cb14968db9f375dcf5d63ca0e2598d52 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f6ac9f06de1f4ced978d0fac0ea38fbaf6f9df9f | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4145323f3d7b70bcc5623bdee7f5c2647f12a9e0 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6f7f84e9844f70e069fabb0b5f05e31a2243b5e5 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b96fbc4a901d78777538ad48b92e413201eda99b | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6ccd6e43b955f6bfe1dfee8d0ea8d8896164d9a1 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9ec33e94b5bb242d7daea6823cd9a77036044b7d | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5dea92f82e1a6300b6976fa695205b40b1253398 | mips | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/9095d277ad323ed98b56d7efc9fac146b0b140e5 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/44d3f8b1e4ecfe36879b3ab990e63882b7fe9d0e | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/157b5603e4d35c6a0ad67cd7376e7e6ad907baf9 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/efccc21980cb37abde5a387c367f46092214665a | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f675b3930e8d3dc3d5d7f3b26b1769c40d0914c4 | i486 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/70b52a7607461a9dbd741e9df12d27149d60ef50 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc7e980e48b7359433ef0ab75005b217dbc00339 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f3f6f47072d1b7ebeaa559fbe9ea1167b09b5fb2 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e30e90b01e1b9202078f2e30ddf7159a01c1a0fa | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e919e670bc6e85166cc084450cefb4f759ded515 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fa42e562fda1a3a67cd54ae84e7832c76de08fb0 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/23e73d985f613c4e5181ee1f1cb774b5f237de73 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/af71d081ecefce8dc35c2c41930539c6ca8fbd9e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9e6c71fd5c521604d2b3d7627d4e3d39af354362 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd90ea3f444f9049fc7a494f448a069217601413 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/69b7b5c7888d297bb8b1b3a490ab4a303ba02302 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/53bf2b51ed6d07d3fca296dcca2c36dd38bb410b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4bbb0768666036bb7b17e795080cba6a526f227d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2aec48c2aa80e6e8d468cbf0be82696a06ac8342 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/efc72ce2ce6e06f8c11a71938707a4fd4d347c93 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/201a457f67453fc8b24f1e2b976727a82b16f494 | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/59adab99f193e6472de6638c151a7a498d2631cc | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/420fcd99ee52ed17654d10b7c41139cece73da80 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9dd11338502d6f5e286ddd2c34d19df8318265d5 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae976d444cfaba70c170076ae4307f0c949407cf | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3dc9ae93019fc35866ad5fcfbae41f7f99853764 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7fdb099da98a876dd4847f8a267f90f6ec1a541f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4ca5118fb5fffbe344ee188553bc9c9e1d7db935 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30a4718159ba3d6966998aefd1067592a8b0c37a | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7e587bdc4cead59551bbf109f30f659b5b5bbe4d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/982b610f1f22a9d924d8bae4bfd6b104ba3adce1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/559e746c19667c3c72a444886c87fe68504f7c62 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a672321c74f197ca76c47667de53417265b11418 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/723f1c3e20cdc9d0132cefb4e10586cbb1a6bb85 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/91a706bfea50783256299543398c0b191f56e320 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/328f814726bbf904b8eac1758f681221430152bd | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f2214db252433b722719223f3893be3f3a6bbad9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/769f0cce9bc2acd7850778f0b1e607b93cbd0598 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/79db83759e2cdd47f84c41ac05e429e1003e3d4e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a364a91481ef42068470ecf34f6ddf4cfd1c460d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bfc3284e44c875508048a23791d653adc2aafc72 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/29181a1a01435053a8d198f8756ba53259bf53e7 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/46607874864faa0c86cc7861825919e3288a7fa2 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/545d7029f6d0edbac596b69b48995facdec060be | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/aa1dcf3a4c8ca01939340de7aa2e356c78f41987 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/11909b0d26e32a0cb4895562194ceb023e320120 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e0725040008f94f28129c11e55ed9657fe1813c9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3085143c5817047cce7b7142fbe62d8f96d03e01 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/302e26dd3554502d88f9c71afed9c24a16fe03c4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3ad95d402b4f3b6eb04e3696dae4c2703ebe7b4b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/14c3e6554d2f9361f2b5361c3744d1b3969e378f | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ace6aee97cc190e5bdb4a0c61ba5c1b1119f36f0 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/14e7f2caec142c4017ad2ff38ea159cbece8d6b6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3871e11dcc26b18e6160c3278691a832220b472b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f934dedaefef0c16534acfe834b6b78fe0419b01 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/2274f3c5fa8b7f633b70f37052876bbf1ab27df8 | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9cb2bc38976705efd9c9b5c5eedbf7fbe7c85ad8 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/c07a3897c3597ed70b6b9b3c6243e65dac573436 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e1789dda3c95e8ce7fa5400c9a08ce11abd5afdd | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0f6b06dade601cdbdebd9f6ff073ae248731967b | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ce3c1ae248c915faa2befb0cfef8dc2e421f0609 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/cee218ac8305e5b6c45230bc42c26fa0a198eb26 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c74c0fc845d43d4a52a2f0b23a4cad4d4cdc53f | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/8bbfa605d9258db6eebaefd61015d1c0990a04fd | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/6e8f56c4dd7b32ea4d4f36398f709ff93a5192ca | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/74b878513ccee451987e2ad9b7a3341902eed0aa | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/474a834f3fa1b315d3920a259308b923e39a7018 | armeb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/ce451042e581f1641ba006045406297bef211dce | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/19d06325af16086897266415f23233d12233c3f0 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0aea0475ca9da95eb531bf4044ad965d1e9d8c6b | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f0d3f236fc4f45157006046e15fc9c633e4f79a | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29fc1fb722d10e4f8795c02dbe778ce6305c3653 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d7fdef5152c2c0ec341b6f4e4fd1d3357b96d44 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8db74a250bdd797a5f117342b817504a8b0ccdb8 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/09963436566fd825528246307eb5c45520e7503d | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53353a844905df5f781a8e01dc28a3c09e69ac6c | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/31541b4a4cb02c0e0ca598f48d6deb926f2b3bad | ORPH xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/97dc16b25fa6a37d05f00960a4616b48f40e37f0 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4f0986ebd0a0c5d9cd8ec51cd153be27989b8996 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/61c2933bfee5baff524b0f13f01a734380d2b147 | riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2fc7c885e7752a88b410169e345db5de0d239d74 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ee7b57c37d6a2ab859f35f28d314aee638ffb392 | mips64el | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/8193b853e37e09280ae182e0ecdb1b9a660f6c9b | ORPH mips64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/8e9678e983b4540c0c8ad00046a85ea3de70fc07 | ORPH mipsel | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/85bf24a5381289878277ce6a6224a4b6859f729c | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/9148892239fe49fd7805b3afea0514c4d719d968 | microblaze | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/5170076f04b40770bcc471a82952e2dcf00e9695 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a87907a5e55c5a52d7dc88338271db41ffa11728 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/bf063e08610a327f59917079dfb504a3277affd8 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/9f89bc5a1bf5ba12a0a053a6f534f032f022d4ce | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/834eb85a3cd1eb9bc34cf8300643082d89256fce | riscv32 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f5071fd40e9aaed1b7f8a942be546e01dee96612 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e98e888d4b81909007860645970096bb182694e9 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/aba8617710bf592605c0eef84262b62f48d5e2dc | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/f018e5278aa265e8d1c1214928a2c5ef841e81f3 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/380e1b30edddea22b2bbacfd9c043c1bf5ca5d58 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5e4175f757a3671b22a6f24f8c8bd0aa55176690 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/96f93af644fecce31325a00cec1a780b57c09839 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ed32065339dc8ac8820f42df3a7d0ca863183a19 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4d69d1505259f70602a6dd56f96d0a414853a698 | ORPH microblaze | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/89631cb4c458d38251ab5b6726b7bb13ce1667f2 | microblazeel | libmdbx-0.11.11 | NOK | http://autobuild.buildroot.net/results/d0be375c992e84d6ab913e07edc3cd6f1a5c4d87 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/cd5e657a900b6bb17f7e101dbbc861d13ab92f39 | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a13ee5d7f051b1550b702f9e756a545403cbb0d0 | x86_64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e96d092c8b3a4fc0e09f24169f526f5fee55f7d7 | i686 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e17a65bd445df9a9b84fee8e5d815acccf947b7e | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/9ccd7b2df4b5c17917713561d31c05c443d134a5 | aarch64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d8b9e88c300ae6df9c3c7e523f38af0de44a4961 | m68k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d23642433e20f6e3d6bbffd6c92e29ba67e1aa84 | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/65205130fe67635134a7c4d05ff20d220f2e3052 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ce8811063b425e2c0b6d8149df51201dcca59c15 | x86_64 | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/1aec101a7b3020eecda2fbf335bb6e407217755f | sparc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/d54c7551ff95d60c9e8c7ff80d8528cccf87a492 | armeb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/465acb0a276c8c46f1f570eabc284ba585818d0a | ORPH mips64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/9d4c63cc8916c93c87c3ad4ae910fb66258ce64d | ORPH sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/5d4a306cf31698e833bb8f5f0b407e87fe62af32 | ORPH s390x | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/f4ea02e5e520f7cd5229386ca8a9fde25a68bc1b | ORPH s390x | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3fadba08f3813552faded0497b586d81acdd0247 | ORPH arceb | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c32667719a928ec94ba2c1121987692f616ec73c | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/18d5c45b3266149d6dacd3bf6a86d5a4c7e4194e | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/070810e79c4a182be06673ead833532c585a92f6 | ORPH arc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/57b44ce9f11a809c253171ed401422e7bc1fd921 | mips64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/af6e78b628b76f1f0456305a83f48de50b02dd94 | or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/0160a895771f7501667ba1acf3700556daef8681 | arceb | lshw-d76afbaaf40e953243da92... | NOK | http://autobuild.buildroot.net/results/ff8638819ef3df5911c7555d039954a9f9f5fa42 | ORPH microblaze | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/afe5006bce0b467f21ad72e131543ff68212240e | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fff8495fdd2e5ff66348185e889a24b7a3e60034 | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fcbf61ac312839f01555054df5f8a4426b821dc0 | ORPH m68k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8e9974f96a6d8de62be13c018e6b037df0d746b5 | ORPH sparc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/ded8602221c38b51960988740f78ec58879921e1 | ORPH arceb | musepack-r475 | NOK | http://autobuild.buildroot.net/results/1b029b9165a33a6eb2f072b6e2f7375cc24bc841 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/e72c38a7de649c7e2639cfc7476a0a283dc3372a | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/c3b0d48fd0a49949f1e7c17e8b4582f06217fbd1 | m68k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/22353483c06e5efaf9da8b1ddd2a4000ce6fcac3 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/1296f37e8f693e2fcd32766d5f8b8d69a6dd7931 | mips64 | neard-0.18 | NOK | http://autobuild.buildroot.net/results/f8944800b886d09c8398e55add0235642e4dce97 | mips64 | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/670b184b84a01b07e9092a71d644186516ab97bf | arm | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63 | sh4 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/225525fb80b8fda1547ba9e4fe2e33e81f62114c | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/0d2b1d9ecfd99327324d1300ee3f23c6a45dbae1 | ORPH or1k | numactl-2.0.14 | NOK | http://autobuild.buildroot.net/results/73dc2ec714f3e97614f84f4d040f6a8404664e61 | powerpc | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/86605b2c026bad66dde75d6273040388facd95b7 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/be8ca7ee002d4495514d769524f0b59beb457853 | ORPH microblaze | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/094afb87ef38366fd7bd96225037700ed3b8c194 | ORPH sparc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/37a7d276777a37e38ae201b5e33d070c6126c01c | ORPH aarch64_be | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/b0549df6462dc050355be3a4f615b14a1e89a4ab | ORPH arm | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/ab8fc76bb03b83222916db88bf4dede470e43cb0 | ORPH arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/a51aa6abe34809f516b24d8727b64aa41155c754 | sh4a | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/2f33160839ba8de770156037d10c1bb4c8276e2a | sparc | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/303c667c0e8038af6b9dbc8fb6caaf25a8f48065 | m68k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/fe785de902219b36f1469f243b3a9c9ff44baf29 | sh4 | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/7d028d6b50c35462b6c9b6031d27c80794c696bb | or1k | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/e5403483e5cd7cec55d7d56e57130a40303ec1b0 | riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/94d4f2e3ddcd1f94d312a212f63061e01d8f62a1 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/a14abb7233ed21b202126de3b2795a0b4030b1e7 | ORPH mips | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/a459c0c18991434cc5664c5e82eff4843d25546f | ORPH or1k | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3aa1c14c50275f7a4413fab3df0e18de67f87673 | ORPH powerpc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/66982096d07af327f6c49470c727ee3aa2f36c56 | ORPH sparc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3c7fbabb35d4d17169821bbc3c7dd850cc240be1 | ORPH riscv64 | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/1e5e50fe0a2af98995cb304ef802cfbbf8918500 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/5ebe6583a6c0203b21c848dddf63da07e6ab8699 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/908bfaee6ef517a4d92591b12466cc03b9d69432 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f15843581c276b6f34a59865b56707f746c899ba | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9322debca099e143054f7a0e19ac61d174ed64c0 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0f75673fe969a6fc6eccd46756a797a623b55271 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/95c39b42f6a56017270a4e2e7a4439045ad6dfb5 | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d6d1133257d0714991ee8a42d7cfdd5f99a7a5c5 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4b8b40fb24b7f45f14d3635f14920dfd77b27731 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/459df0d5dcb3ce09ced593e872ef0655cd2ca7f5 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f4eb2e3c023003e2bd2ab09bde295f55c2835bbb | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/82703cc5d66b2cf9f6b73c1877078c64a919db90 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0f35760c383bddf2b865102bbe1dd547008c8f00 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a95d1f533c314c55587d49a313503b50c1d09828 | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d0ac3758308b7f9cfd2193d67489788ea9acfc7d | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3a64fb0ad5c4098b023af10c45eb93a90e606707 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d46fe6d6b8038cb583323c7a22fd17a89ca8a88e | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0019bd3c5e72663415ab9b3b006a1ddc0c7d6bee | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c2c59c3b3398e543b472861f5d5befae832be3b1 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/599ae18c14efdcf4b0b7cea17d6020f85cbfd6fa | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/683223c064b87db43c2fcaa720c76b01a043f40b | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d0a423fd07fb9d96be8b60598aab931ae708346e | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/6722e216d7f4be13f4136a2950ffa8c5929e1b37 | ORPH armeb | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/d17eb5f567115d5c1a6c871384922acb3a0cf6f2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae225f12df15f656fc2c924ac4989ddd7e9f79b5 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3fdcfde720220410759c4b7c23877eb1e3b0364f | sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01aa822b523f6be32e387b14cd10bbceeb00f0e6 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e6b79ad2b24c0b5bf3536f74a786272c99d2b0d0 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/b84a746612d10b2fec966b7b137bcc0ac5c6828d | microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/3f91fda936aea5f5fa048a4728cfa972e9063649 | aarch64_be | tekui-1.12 | NOK | http://autobuild.buildroot.net/results/c6cd0d488581013a8b215b0ee2fd8f549a868d4b | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/520e50cd5b22875514e48e1b3e7bc87f20dfe760 | ORPH microblazeel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/0708e82daa19a9d0b8f517e5b61f6908bc9039c3 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/1480acf997b6c567d4044f8c29b981195be14019 | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/bbe9e46d69b2c37913dbd37191780874d8fe7e06 | x86_64 | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9 | mips64el | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640 | m68k | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/a7498dc8cc26db3bfc1a2629a9d247fe177ed5a3 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/589b16eca9ea2b15a3feda3b078bd428b0c54f44 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/87ec35952ab6d0df53d0d8aadd4ccb1fa12c91dc | arc | unknown | NOK | http://autobuild.buildroot.net/results/ef6f7678012287f8f3dddacee2e2665f4d1f4db5 | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/2be7430cbf583ee5e91b12a5313d7c2086ed9aff | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/21dc838c51760a9eff10b058cd60f89c139ddf3c | arc | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/0f533f0442fe5ae876ea4f7fe7dfdba619aea94b | mips64el | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/36937983c8e9ff08cae1502717f9b4a260639592 | i586 | wine-7.0 | NOK | http://autobuild.buildroot.net/results/61f31182099d71189091d237887eb0c2df8880a6 | mips64el | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/7bb9fa6788bbbeab5ac0355e92780ac417ed7b06 | arm | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/8b7e57d70f145804df9cc6f8cc7d30dbb2102963 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/b2aa356c21784ce47cbc3f67783cc0453cec665e | m68k | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/e491d5811937a8c68175984d83f39afbeb898314 | microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/4d9baaf58c9059a79d8cb51c810eb1eb1ecb8c6e | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/c92cbeafd1637c5ce77c378b1c2c776a26ecaa92 | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/70a2e6fef040d5e391e80043dc8e3ba074205d4c | microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/8628f94851ba50e356ea5f03285058baa4d66303 | Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 perl-5.34.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8b4069306024df930a8827aefd1054cda9ee78fb | powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/a9fdd07354246d8cada2a928f8202c9281e9fe7d | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-go-1.18.6 | 2 gerbera-1.10.0 | 1 grep-3.7 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 linux-5.17.15 | 1 sdl-1.2.15 | 1 sudo-1.9.11p2 | 1 unknown | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1eb3d7cea3510eb469760ca65c66ddee3603727e | arceb | grep-3.7 | NOK | http://autobuild.buildroot.net/results/fb7b57e3432468420877092365bd5d1a435e9d78 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/b114e6e61179acf71cb0d778558c21e98d34b35d | powerpc64le | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/0504bcc6f8782b53e2fb27580aca257b8b887f35 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/1466ef7769ccdf55a26fc2f364da60173c1da846 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/67db6665a58434f036cabfe097db100f99cd1ac7 | ORPH mips64el | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/4cc7613dc062ce8676f554038610a0defab1504f | ORPH sh4 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/ba6dad05e8fa3c4b88842d7c432571a08bf2a83c | ORPH sparc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/474d76d113169f73fc8085f6bf381cea5bd3a06b | ORPH m68k | unknown | NOK | http://autobuild.buildroot.net/results/af6638e99ca058b8a5258b512908907f6f2798f8 | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/9cf621bf2a89c40276913d3630c0775951bca128 | -- http://autobuild.buildroot.net From angelo at amarulasolutions.com Fri Oct 14 06:58:55 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:55 +0200 Subject: [Buildroot] [PATCH v2 0/5] Lichee RV and Lichee RV dock support Message-ID: <20221014065900.3311604-1-angelo@amarulasolutions.com> In order to support bluetooth on the dock, I had to fully enable the CONFIG_EXTRA_FIRMWARE mechanism: indeed the bluetooth driver requires a firmware which is not available at the moment of loading if not embedded in the kernel image. I choose to install the extra firmware files in staging, so there is no need to clean the target filesystem for those files after building the kernel. The macro KCONFIG_APPEND_OPT was needed so each one of the packages willing to have a firmware embedded can simply have a $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,firmware.bin) Changelog: v2: * Renamed the configs from lichee_rv_* to sipeed_lichee_rv_* * Moved the boards directories intoboard/sipeed * Added bluetooth support for lichee_rv_dock * Updated the opensbi, uboot, linux version to the same as nezha Angelo Compagnucci (5): linux: enable CONFIG_EXTRA_FIRMWARE_DIR package/pkg-utils: add KCONFIG_APPEND_OPT ackage/rtl8723ds-bt: new package configs/lichee_rv: new defconfig configs/lichee_rv_dock: new defconfig board/sipeed/lichee_rv/genimage.cfg | 37 +++++++++++++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ board/sipeed/lichee_rv/readme.txt | 26 +++++++++ board/sipeed/lichee_rv_dock/genimage.cfg | 37 +++++++++++++ .../overlay/etc/network/interfaces | 7 +++ .../overlay/etc/wpa_supplicant.conf | 8 +++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ ...-d1-lichee-rv-dock-add-bluetooth-bin.patch | 33 ++++++++++++ board/sipeed/lichee_rv_dock/readme.txt | 45 ++++++++++++++++ configs/sipeed_lichee_rv_defconfig | 34 ++++++++++++ configs/sipeed_lichee_rv_dock_defconfig | 40 ++++++++++++++ linux/linux.mk | 6 ++- package/Config.in | 1 + package/pkg-utils.mk | 10 ++++ package/rtl8723ds-bt/Config.in | 6 +++ package/rtl8723ds-bt/rtl8723ds-bt.hash | 2 + package/rtl8723ds-bt/rtl8723ds-bt.mk | 28 ++++++++++ 17 files changed, 427 insertions(+), 1 deletion(-) create mode 100644 board/sipeed/lichee_rv/genimage.cfg create mode 100644 board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv/readme.txt create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch create mode 100644 board/sipeed/lichee_rv_dock/readme.txt create mode 100644 configs/sipeed_lichee_rv_defconfig create mode 100644 configs/sipeed_lichee_rv_dock_defconfig create mode 100644 package/rtl8723ds-bt/Config.in create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:56 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:56 +0200 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-2-angelo@amarulasolutions.com> CONFIG_EXTRA_FIRMWARE_DIR must point to the directory where firmware file from CONFIG_EXTRA_FIRMWARE will be taken to be embedded to the kernel. The option is removed if CONFIG_EXTRA_FIRMWARE is not used, but it defaults to a sensible value when used. Signed-off-by: Angelo Compagnucci --- linux/linux.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/linux/linux.mk b/linux/linux.mk index efdc21eff2..9a909c7d7b 100644 --- a/linux/linux.mk +++ b/linux/linux.mk @@ -408,6 +408,9 @@ define LINUX_KCONFIG_FIXUP_CMDS $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO) $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO_LINUX_CLUT224)) $(call KCONFIG_DISABLE_OPT,CONFIG_GCC_PLUGINS) + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full + # path for locating firmware file. + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") $(PACKAGES_LINUX_CONFIG_FIXUPS) endef -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:57 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:57 +0200 Subject: [Buildroot] [PATCH v2 2/5] package/pkg-utils: add KCONFIG_APPEND_OPT In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-3-angelo@amarulasolutions.com> This macro can be used to append a value to a previously configured option where the intent is to join the old value with the new one. Signed-off-by: Angelo Compagnucci --- package/pkg-utils.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk index 0945e6ed31..d812946934 100644 --- a/package/pkg-utils.mk +++ b/package/pkg-utils.mk @@ -33,6 +33,16 @@ define KCONFIG_ENABLE_OPT $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=y, $(2)); \ fi endef +# KCONFIG_APPEND_OPT (option, value, [, file]) +# If the option is already set append, else add new. +define KCONFIG_APPEND_OPT + $(Q)if ! grep -q '^$(strip $(1))' $(call KCONFIG_DOT_CONFIG,$(3)); then \ + $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=$(2), $(3)); \ + else \ + grep -E '$(strip $(1)).*$(strip $(2))' $(call KCONFIG_DOT_CONFIG,$(3)) || \ + $(SED) 's|$(1)="\(.*\)"|$(1)="\1 $(2)"|g' $(call KCONFIG_DOT_CONFIG,$(3)); \ + fi +endef # KCONFIG_SET_OPT (option, value [, file]) KCONFIG_SET_OPT = $(call KCONFIG_MUNGE_DOT_CONFIG, $(1), $(1)=$(2), $(3)) # KCONFIG_DISABLE_OPT (option [, file]) -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:58 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:58 +0200 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-4-angelo@amarulasolutions.com> This package enables the Bluetooth device embedded in the RTL8723DS chip. Signed-off-by: Angelo Compagnucci --- linux/linux.mk | 3 ++- package/Config.in | 1 + package/rtl8723ds-bt/Config.in | 6 ++++++ package/rtl8723ds-bt/rtl8723ds-bt.hash | 2 ++ package/rtl8723ds-bt/rtl8723ds-bt.mk | 28 ++++++++++++++++++++++++++ 5 files changed, 39 insertions(+), 1 deletion(-) create mode 100644 package/rtl8723ds-bt/Config.in create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk diff --git a/linux/linux.mk b/linux/linux.mk index 9a909c7d7b..8ae5a97a80 100644 --- a/linux/linux.mk +++ b/linux/linux.mk @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) # Starting with 4.16, the generated kconfig paser code is no longer # shipped with the kernel sources, so we need flex and bison, but diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..4f6e508106 100644 --- a/package/Config.in +++ b/package/Config.in @@ -578,6 +578,7 @@ endmenu source "package/rtl8189fs/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" + source "package/rtl8723ds-bt/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" source "package/rtl8821au/Config.in" source "package/sane-backends/Config.in" diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in new file mode 100644 index 0000000000..ab4ba0bf11 --- /dev/null +++ b/package/rtl8723ds-bt/Config.in @@ -0,0 +1,6 @@ +config BR2_PACKAGE_RTL8723DS_BT + bool "rtl8723ds-bt" + help + rtl8723ds UART attached Bluetooth driver + + https://github.com/wsyco/RTL8723DS_BT_Linux diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.hash b/package/rtl8723ds-bt/rtl8723ds-bt.hash new file mode 100644 index 0000000000..1ec4e350f9 --- /dev/null +++ b/package/rtl8723ds-bt/rtl8723ds-bt.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4 rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.mk b/package/rtl8723ds-bt/rtl8723ds-bt.mk new file mode 100644 index 0000000000..be1b9a9cc2 --- /dev/null +++ b/package/rtl8723ds-bt/rtl8723ds-bt.mk @@ -0,0 +1,28 @@ +################################################################################ +# +# rtl8723ds-bt +# +################################################################################ + +RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08 +RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION)) +RTL8723DS_BT_LICENSE = PROPRIETARY +RTL8723DS_BT_INSTALL_STAGING = YES + +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) + $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) +endef + +define RTL8723DS_BT_INSTALL_STAGING_CMDS + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ + cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin + cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin +endef + +$(eval $(generic-package)) -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:58:59 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:58:59 +0200 Subject: [Buildroot] [PATCH v2 4/5] configs/lichee_rv: new defconfig In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-5-angelo@amarulasolutions.com> Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. Board support is based on the nezha defconfig already available in buildroot. https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html https://linux-sunxi.org/Sipeed_Lichee_RV Signed-off-by: Angelo Compagnucci --- board/sipeed/lichee_rv/genimage.cfg | 37 +++++++++++++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ board/sipeed/lichee_rv/readme.txt | 26 +++++++++ configs/sipeed_lichee_rv_defconfig | 34 ++++++++++++ 4 files changed, 151 insertions(+) create mode 100644 board/sipeed/lichee_rv/genimage.cfg create mode 100644 board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv/readme.txt create mode 100644 configs/sipeed_lichee_rv_defconfig diff --git a/board/sipeed/lichee_rv/genimage.cfg b/board/sipeed/lichee_rv/genimage.cfg new file mode 100644 index 0000000000..52603c3f70 --- /dev/null +++ b/board/sipeed/lichee_rv/genimage.cfg @@ -0,0 +1,37 @@ +# Minimal SD card image for the sipeed Lichee RV + +image sdcard.img { + hdimage { + } + + partition boot0-1 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 8K + } + + partition boot0-2 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 128K + } + + partition u-boot-1 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 12M + } + + partition u-boot-2 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 16400K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + offset = 18M + } +} diff --git a/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch b/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch new file mode 100644 index 0000000000..69ebe3b21d --- /dev/null +++ b/board/sipeed/lichee_rv/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch @@ -0,0 +1,54 @@ +From 4a923e0e4ef6d2b41cb89d658e269adada847573 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Thu, 4 Nov 2021 22:32:04 +0100 +Subject: [PATCH] Makefile: HACK: Support building u-boot.toc1 for nezda board + +For easier integration into Buildroot. The boot0 / toc1 logic is WIP until +U-Boot gains SPL support for the D1, so add a hack to make it easier to +integrate in Buildroot as-is. + +Signed-off-by: Peter Korsgaard +--- + Makefile | 9 +++++++++ + nezha.cfg | 9 +++++++++ + 2 files changed, 18 insertions(+) + create mode 100644 nezha.cfg + +diff --git a/Makefile b/Makefile +index f911f70344..259d93bf80 100644 +--- a/Makefile ++++ b/Makefile +@@ -1084,6 +1084,15 @@ endif + .binman_stamp: FORCE + @touch $@ + ++fw_dynamic.bin: $(OPENSBI) ++ $(call if_changed,copy) ++ ++MKIMAGEFLAGS_u-boot.toc1 = -T sunxi_toc1 ++u-boot.toc1: lichee-rv.cfg fw_dynamic.bin inputs ++ $(call if_changed,mkimage) ++ ++all: u-boot.toc1 ++ + ifeq ($(CONFIG_DEPRECATED),y) + $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") + endif +diff --git a/lichee-rv.cfg b/lichee-rv.cfg +new file mode 100644 +index 0000000000..2d23b9b388 +--- /dev/null ++++ b/lichee-rv.cfg +@@ -0,0 +1,9 @@ ++[opensbi] ++file = fw_dynamic.bin ++addr = 0x40000000 ++[dtb] ++file = arch/riscv/dts/sun20i-d1-lichee-rv.dtb ++addr = 0x44000000 ++[u-boot] ++file = u-boot-nodtb.bin ++addr = 0x4a000000 +-- +2.20.1 + diff --git a/board/sipeed/lichee_rv/readme.txt b/board/sipeed/lichee_rv/readme.txt new file mode 100644 index 0000000000..008be3a3bc --- /dev/null +++ b/board/sipeed/lichee_rv/readme.txt @@ -0,0 +1,26 @@ +Lichee RV +=============== + +Lichee RV - Nezha CM is a compute module with modular design, equipped +with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. +It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin +connectors to route all IO, making it convient for wide use and easy to replace. + +How to build +============ + +$ make lichee_rv_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Connect a TTL UART to the debug connector, insert the microSD card and +plug in a USB-C cable to the PWR connector to boot the system. diff --git a/configs/sipeed_lichee_rv_defconfig b/configs/sipeed_lichee_rv_defconfig new file mode 100644 index 0000000000..355d5caa70 --- /dev/null +++ b/configs/sipeed_lichee_rv_defconfig @@ -0,0 +1,34 @@ +BR2_riscv=y +BR2_GLOBAL_PATCH_DIR="board/sipeed/lichee_rv/patches" +BR2_ROOTFS_OVERLAY="board/nezha/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,fe178cf0153d98b71cb01a46c8cc050826a17e77)/linux-fe178cf0153d98b71cb01a46c8cc050826a17e77.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="nezha" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_OPENSBI=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,opensbi,e6793dc36a71537023f078034fe795c64a9992a3)/opensbi-e6793dc36a71537023f078034fe795c64a9992a3.tar.gz" +BR2_TARGET_OPENSBI_PLAT="generic" +# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set +BR2_TARGET_SUN20I_D1_SPL=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,d1-2022-05-26)/uboot-d1-2022-05-26.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.toc1" +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.25.1 From angelo at amarulasolutions.com Fri Oct 14 06:59:00 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Fri, 14 Oct 2022 08:59:00 +0200 Subject: [Buildroot] [PATCH v2 5/5] configs/lichee_rv_dock: new defconfig In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> Message-ID: <20221014065900.3311604-6-angelo@amarulasolutions.com> Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer. https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html Signed-off-by: Angelo Compagnucci --- board/sipeed/lichee_rv_dock/genimage.cfg | 37 +++++++++++++ .../overlay/etc/network/interfaces | 7 +++ .../overlay/etc/wpa_supplicant.conf | 8 +++ ...t-building-u-boot.toc1-for-lichee-rv.patch | 54 +++++++++++++++++++ ...-d1-lichee-rv-dock-add-bluetooth-bin.patch | 33 ++++++++++++ board/sipeed/lichee_rv_dock/readme.txt | 45 ++++++++++++++++ configs/sipeed_lichee_rv_dock_defconfig | 40 ++++++++++++++ 7 files changed, 224 insertions(+) create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch create mode 100644 board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch create mode 100644 board/sipeed/lichee_rv_dock/readme.txt create mode 100644 configs/sipeed_lichee_rv_dock_defconfig diff --git a/board/sipeed/lichee_rv_dock/genimage.cfg b/board/sipeed/lichee_rv_dock/genimage.cfg new file mode 100644 index 0000000000..016acc3611 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/genimage.cfg @@ -0,0 +1,37 @@ +# Minimal SD card image for the sipeed Lichee RV dock + +image sdcard.img { + hdimage { + } + + partition boot0-1 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 8K + } + + partition boot0-2 { + in-partition-table = "no" + image = "boot0_sdcard_sun20iw1p1.bin" + offset = 128K + } + + partition u-boot-1 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 12M + } + + partition u-boot-2 { + in-partition-table = "no" + image = "u-boot.toc1" + offset = 16400K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + offset = 18M + } +} diff --git a/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces b/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file mode 100644 index 0000000000..62153aabd1 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces @@ -0,0 +1,7 @@ +auto lo +iface lo inet loopback + +auto wlan0 +iface wlan0 inet dhcp +pre-up modprobe 8723ds +wpa-conf /etc/wpa_supplicant.conf diff --git a/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf b/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file mode 100644 index 0000000000..b43292b0a7 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf @@ -0,0 +1,8 @@ +ap_scan=1 + +network={ + ssid="YOURSSID" + scan_ssid=1 + key_mgmt=WPA-PSK + psk="YOURPASSWD" +} diff --git a/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch b/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch new file mode 100644 index 0000000000..396d928b85 --- /dev/null +++ b/board/sipeed/lichee_rv_dock/patches/uboot/0001-Makefile-HACK-Support-building-u-boot.toc1-for-lichee-rv.patch @@ -0,0 +1,54 @@ +From 4a923e0e4ef6d2b41cb89d658e269adada847573 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Thu, 4 Nov 2021 22:32:04 +0100 +Subject: [PATCH] Makefile: HACK: Support building u-boot.toc1 for nezda board + +For easier integration into Buildroot. The boot0 / toc1 logic is WIP until +U-Boot gains SPL support for the D1, so add a hack to make it easier to +integrate in Buildroot as-is. + +Signed-off-by: Peter Korsgaard +--- + Makefile | 9 +++++++++ + nezha.cfg | 9 +++++++++ + 2 files changed, 18 insertions(+) + create mode 100644 nezha.cfg + +diff --git a/Makefile b/Makefile +index f911f70344..259d93bf80 100644 +--- a/Makefile ++++ b/Makefile +@@ -1084,6 +1084,15 @@ endif + .binman_stamp: FORCE + @touch $@ + ++fw_dynamic.bin: $(OPENSBI) ++ $(call if_changed,copy) ++ ++MKIMAGEFLAGS_u-boot.toc1 = -T sunxi_toc1 ++u-boot.toc1: lichee-rv-dock.cfg fw_dynamic.bin inputs ++ $(call if_changed,mkimage) ++ ++all: u-boot.toc1 ++ + ifeq ($(CONFIG_DEPRECATED),y) + $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") + endif +diff --git a/lichee-rv-dock.cfg b/lichee-rv-dock.cfg +new file mode 100644 +index 0000000000..2d23b9b388 +--- /dev/null ++++ b/lichee-rv-dock.cfg +@@ -0,0 +1,9 @@ ++[opensbi] ++file = fw_dynamic.bin ++addr = 0x40000000 ++[dtb] ++file = arch/riscv/dts/sun20i-d1-lichee-rv-dock.dtb ++addr = 0x44000000 ++[u-boot] ++file = u-boot-nodtb.bin ++addr = 0x4a000000 +-- +2.20.1 + diff --git a/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch b/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch new file mode 100644 index 0000000000..091afeacdc --- /dev/null +++ b/board/sipeed/lichee_rv_dock/patches/uboot/0002-RISCV-dts-sun20i-d1-lichee-rv-dock-add-bluetooth-bin.patch @@ -0,0 +1,33 @@ +From add5f78e04e22f12da309f11122c1a9133b09d0b Mon Sep 17 00:00:00 2001 +From: Angelo Compagnucci +Date: Thu, 13 Oct 2022 22:37:29 +0200 +Subject: [PATCH] RISCV: dts: sun20i: d1: lichee-rv-dock: add bluetooth binding + +UART1 is attached to a rtl8723ds bluetooth module + +Signed-off-by: Angelo Compagnucci +--- + arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts b/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts +index 0b0f356e2e..c27e682c5e 100644 +--- a/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts ++++ b/arch/riscv/dts/sun20i-d1-lichee-rv-dock.dts +@@ -158,6 +158,13 @@ + pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; + pinctrl-names = "default"; + status = "okay"; ++ ++ bluetooth { ++ compatible = "realtek,rtl8723ds-bt"; ++ device-wake-gpios = <&gpio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */ ++ enable-gpios = <&gpio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */ ++ host-wake-gpios = <&gpio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ ++ }; + }; + + &usbphy { +-- +2.25.1 + diff --git a/board/sipeed/lichee_rv_dock/readme.txt b/board/sipeed/lichee_rv_dock/readme.txt new file mode 100644 index 0000000000..34478cafcc --- /dev/null +++ b/board/sipeed/lichee_rv_dock/readme.txt @@ -0,0 +1,45 @@ +Lichee RV dock +=============== + +Lichee RV Dock is a RISC-V Linux development kits with high integration, small +size and affordable price designed for opensource developer. It's equipped with +HDMI interface and it supports many screen by its screen convert board. It's +also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module, +an analog microphone and a speaker jack interface. + +How to build +============ + +$ make lichee_rv_dock_defconfig +$ make + +Wifi +========== + +Edit board/lichee_rv/overlay_dock/etc/wpa_supplicant.conf or +/etc/wpa_supplicant.conf once connected to the board: + +* Replace YOURSSID with your AP ssid +* Replace YOURPASSWD with your AP password + +Bluetooth +========== + +To make the device discoverable and pairable, once connected to the board: + +* bluetoothctl power on +* bluetoothctl discoverable yes +* bluetoothctl pairable yes + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Connect a TTL UART to the debug connector, insert the microSD card and +plug in a USB-C cable to the PWR connector to boot the system. diff --git a/configs/sipeed_lichee_rv_dock_defconfig b/configs/sipeed_lichee_rv_dock_defconfig new file mode 100644 index 0000000000..6da3ae24e4 --- /dev/null +++ b/configs/sipeed_lichee_rv_dock_defconfig @@ -0,0 +1,40 @@ +BR2_riscv=y +BR2_GLOBAL_PATCH_DIR="board/sipeed/lichee_rv_dock/patches" +BR2_ROOTFS_OVERLAY="board/nezha/overlay board/sipeed/lichee_rv_dock/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv_dock/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,fe178cf0153d98b71cb01a46c8cc050826a17e77)/linux-fe178cf0153d98b71cb01a46c8cc050826a17e77.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="nezha" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv-dock" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_PACKAGE_BLUEZ5_UTILS=y +BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y +BR2_PACKAGE_RTL8723DS=y +BR2_PACKAGE_RTL8723DS_BT=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_OPENSBI=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,opensbi,e6793dc36a71537023f078034fe795c64a9992a3)/opensbi-e6793dc36a71537023f078034fe795c64a9992a3.tar.gz" +BR2_TARGET_OPENSBI_PLAT="generic" +# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set +BR2_TARGET_SUN20I_D1_SPL=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,d1-2022-05-26)/uboot-d1-2022-05-26.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.toc1" +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.25.1 From buildroot at busybox.net Fri Oct 14 08:25:46 2022 From: buildroot at busybox.net (busybox.net) Date: 14 Oct 2022 10:25:46 +0200 Subject: [Buildroot] ACTION REQUIRED Message-ID: <20221014102546.A559E46121730E57@busybox.net> An HTML attachment was scrubbed... URL: From feedback at dallmeier.com Fri Oct 14 09:10:17 2022 From: feedback at dallmeier.com (feedback at dallmeier.com) Date: Fri, 14 Oct 2022 11:10:17 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation Message-ID: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> An HTML attachment was scrubbed... URL: From yann.morin at orange.com Fri Oct 14 11:18:25 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:25 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel Message-ID: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> To generate the glibc locale data, we call into a recursive Makefile, so as to generate locales in parallel. This is done as part of a target-fialize hook. However, that hook is registered after all packages have been parsed, and as such, it maye be registered after hooks defined in packages. Furthermore, the expansion of target-finalize hooks is done in a recipe, so it is not easy to understand whether this generates a "simple" rule or not. As a consequence, despite the use of $(MAKE), make may not notice that the command is a recursive call, and will decide to close the jobserver file-descriptors, yieldiong warnings like: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. This causes the lcoale data to not be generated in parallel, which is initially all the fuss about using a sub-makefile... So, do as suggested, and prepend the hook with a '+', so that it isexplicit to make that it should not close its jobserver fds. Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) Signed-off-by: Yann E. MORIN Cc: Gleb Mazovetskiy --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..ededfa491d 100644 --- a/Makefile +++ b/Makefile @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) PACKAGES += host-localedef define GENERATE_GLIBC_LOCALES - $(MAKE) -f support/misc/gen-glibc-locales.mk \ + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ LOCALES="$(GLIBC_GENERATE_LOCALES)" \ Q=$(Q) -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Fri Oct 14 11:18:26 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:26 +0200 Subject: [Buildroot] [PATCH 2/3] support/scripts: don't require gawk to generate glibc gconv modules In-Reply-To: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> When a subset of the glibc gconv modules installed, we eed to generate a trimmed-down list of available modules. We currently use gawk for that. However, we are not using any GNU extension in that awk script, and it happens to work as expected when using mawk (which has no GNU extension). Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) did not explain why it used gawk explicitly, and given the age for that commit, we doubt we'd be able to have the involved participants recall anything from that period... Besides, gawk is not a requirement for Buildroot. Switch over to using plain awk. Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index 03012c1ce3..bc60fc0ce4 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -19,7 +19,7 @@ # we handle each with slightly different code, since the second never has # associated aliases. -gawk -v files="${1}" ' +awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Fri Oct 14 11:18:27 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Fri, 14 Oct 2022 13:18:27 +0200 Subject: [Buildroot] [PATCH 3/3] toolchain: suppot gconv modules fro mglibc >= 2.34 In-Reply-To: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> Startig with glibc 2.34, the gconv modules description has been split in two: - a common definition in the old location, /usr/lib/gconv/gconv-modules - specific defitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ This is done so as to simplify the handling of glibc gconv modules, and eventually to segregate those outside of glibc, and so that third-parties may also provide their own gconv converters and their definitions. And starting with that same glibc version, most of the gconv modules definition is moved to an extra configuration file in that sub-directory. It is thus no longer possible to use special code pages, like cp850, which are very usefull to access FAT-formatted devices. Add suppot for this new gconv layout, while keeping support for older glibc versions. Note that the modules themselves are not moved or renaed, just the definition files have changed. Instead of passing the one old gonv modules definitions file on stdin, we pass the base directory to that file, and move into the script the responsibility to find all the gconv definition files. Signed-off-by: Yann E. MORIN Cc: Thomas Petazzoni Cc: Romain Naour Cc: Thomas De Schampheleire Cc: Giulio Benetti --- support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ toolchain/toolchain.mk | 9 +++++++-- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index bc60fc0ce4..e9ac48ca3f 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -1,11 +1,17 @@ #!/usr/bin/env bash # This script is used to generate a gconv-modules file that takes into -# account only the gconv modules installed by Buildroot. It receives -# on its standard input the original complete gconv-modules file from -# the toolchain, and as arguments the list of gconv modules that were -# actually installed, and writes on its standard output the new -# gconv-modules file. +# account only the gconv modules installed by Buildroot, and generates +# a stripped-down gconv-moduels file on its stdout. +# It takes two arguments: +# $1: the directory where to look for gconv modules definitions +# $2: a space-separated list of gconv modules that were actually +# installed + +# Starting with glibc-2.34, modules definitions are located in multiple +# files: +# ${1}/gconv-modules +# ${1}/gconv-modules.d/*.conf # The format of gconv-modules is precisely documented in the # file itself. It consists of two different directives: @@ -19,7 +25,11 @@ # we handle each with slightly different code, since the second never has # associated aliases. -awk -v files="${2}" ' +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do + [ -e "${f}" ] || continue + cat "${f}" +done \ +|awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk index 08d1649603..fe87a72ed4 100644 --- a/toolchain/toolchain.mk +++ b/toolchain/toolchain.mk @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ $(TARGET_DIR)/usr/lib/gconv \ || exit 1; \ + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ + fi; \ else \ for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS || exit 1; \ done; \ done; \ - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ + ./support/scripts/expunge-gconv-modules \ + $(STAGING_DIR)/usr/lib/$${d}/gconv \ + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ fi endef -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From quentin.schulz at theobroma-systems.com Fri Oct 14 12:48:35 2022 From: quentin.schulz at theobroma-systems.com (Quentin Schulz) Date: Fri, 14 Oct 2022 14:48:35 +0200 Subject: [Buildroot] Changing configuration options of package in another one In-Reply-To: References: Message-ID: Hi Jesse, On 10/13/22 15:06, Jesse Van Gavere wrote: > Hello, > > I'm in a bit of a peculiar situation for which I'm not sure what the > correct solution is. > I'm trying to implement the qt6 remote objects package, this has a > dependency on host-qt6remoteobjects because it needs a host tool from > it to build the target package, however, to build the host package it > needs qt6base network enabled in the host qt6 build, this is by > default turned off as it's not a necessity for the host tools needed > to build the target package. > > So to make it work I've added an enable for the network module to > HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, > what should I do here? Manipulate the qt6 host build it in the remote > objects package? Or maybe turn on the network module for the qt6 host > build whenever the target qt6 network module gets enabled? > Not sure I have entirely understood the issue but here's a try anyways :) I would add a build option to the host qt6 for network support in Kconfig, then have your remote objects package depends on this option being selected. If it's not selected, your package won't be selected either, which is what is desired I think? Cheers, Quentin From peter at korsgaard.com Fri Oct 14 13:48:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:18 +0200 Subject: [Buildroot] [PATCH] configs/visionfive_defconfig: new defconfig In-Reply-To: <20221008184016.2327196-1-peter@korsgaard.com> (Peter Korsgaard's message of "Sat, 8 Oct 2022 20:40:16 +0200") References: <20221008184016.2327196-1-peter@korsgaard.com> Message-ID: <87bkqeo6sd.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Add a defconfig for the Starfive VisionFive board, a board built around the > Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). > This board comes with functional lowlevel and U-Boot bootloaders in SPI > flash. The defconfig reuses these and only builds a (6.0 based) kernel and > rootfs. > The factory shipped U-Boot is hard coded to look at MMC partition 3 and > misses some variables, so we provide a uEnv.txt to fix that up, based on > what is done in provided Fedora image. > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/libmaxminddb: bump to version 1.7.1 In-Reply-To: <20221009201432.16067-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 22:14:32 +0200") References: <20221009201432.16067-1-fontaine.fabrice@gmail.com> Message-ID: <877d12o6ry.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 In-Reply-To: <20221009210613.49541-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:06:13 +0200") References: <20221009210613.49541-1-fontaine.fabrice@gmail.com> Message-ID: <8735bqo6rt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This release contains fixes for three minor memory safety problems. > None are believed to be exploitable, but we report most memory safety > problems as potential security vulnerabilities out of caution. > * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. > Reported by Qualys > * ssh-keygen(1): double free() in error path of file hashing step in > signing/verify code; GHPR333 > * ssh-keysign(8): double-free in error path introduced in openssh-8.9 > https://www.openssh.com/txt/release-9.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/cppzmq: bump to version 4.9.0 In-Reply-To: <20221009211445.62107-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:14:45 +0200") References: <20221009211445.62107-1-fontaine.fabrice@gmail.com> Message-ID: <87y1tims6z.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:48:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 In-Reply-To: <20221009212341.86425-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:23:41 +0200") References: <20221009212341.86425-1-fontaine.fabrice@gmail.com> Message-ID: <87tu46ms6u.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, > CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 > - Update hash of README.txt (Windows XP dropped with > https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:49:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/checksec: bump to version 2.6.0 In-Reply-To: <20221009213212.92009-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:32:12 +0200") References: <20221009213212.92009-1-fontaine.fabrice@gmail.com> Message-ID: <87pmeums5v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Update hash of LICENSE.txt (update in year with > https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) > https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:49:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/freeipmi: bump to version 1.6.10 In-Reply-To: <20221009213823.116245-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:38:23 +0200") References: <20221009213823.116245-1-fontaine.fabrice@gmail.com> Message-ID: <87lepims58.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:50:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:50:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: bump to version 2 In-Reply-To: <20221009214945.128155-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:49:45 +0200") References: <20221009214945.128155-1-fontaine.fabrice@gmail.com> Message-ID: <87h706ms3v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Replace rjk_cv_python24 by rjk_cv_python3 due to > https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca > http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html > https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/gmrender-resurrect: bump to version 0.1 In-Reply-To: <20221009215801.227838-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:58:01 +0200") References: <20221009215801.227838-1-fontaine.fabrice@gmail.com> Message-ID: <87czaums30.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > gmrender-resurrect uses threads since > https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de > https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 In-Reply-To: <20221009220250.310026-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:02:50 +0200") References: <20221009220250.310026-1-fontaine.fabrice@gmail.com> Message-ID: <878rlims2k.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This is a bug fix and enhancement release on the 3.7.x branch. > https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:51:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/isl: bump to version 0.25 In-Reply-To: <20221009220638.319188-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:06:38 +0200") References: <20221009220638.319188-1-fontaine.fabrice@gmail.com> Message-ID: <874jw6ms27.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 13:47:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:37 +0200 Subject: [Buildroot] [git commit] package/libmaxminddb: bump to version 1.7.1 Message-ID: <20221014135306.765EC86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=78aa8141aaef8a8dc05d5385694b795100373c24 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/maxmind/libmaxminddb/blob/1.7.1/Changes.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libmaxminddb/libmaxminddb.hash | 2 +- package/libmaxminddb/libmaxminddb.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmaxminddb/libmaxminddb.hash b/package/libmaxminddb/libmaxminddb.hash index cfe838f7e5..7e56351c0f 100644 --- a/package/libmaxminddb/libmaxminddb.hash +++ b/package/libmaxminddb/libmaxminddb.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 7620ac187c591ce21bcd7bf352376a3c56a933e684558a1f6bef4bd4f3f98267 libmaxminddb-1.6.0.tar.gz +sha256 e8414f0dedcecbc1f6c31cb65cd81650952ab0677a4d8c49cab603b3b8fb083e libmaxminddb-1.7.1.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/libmaxminddb/libmaxminddb.mk b/package/libmaxminddb/libmaxminddb.mk index 4037f89a15..993b4aec9d 100644 --- a/package/libmaxminddb/libmaxminddb.mk +++ b/package/libmaxminddb/libmaxminddb.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMAXMINDDB_VERSION = 1.6.0 +LIBMAXMINDDB_VERSION = 1.7.1 LIBMAXMINDDB_SITE = \ https://github.com/maxmind/libmaxminddb/releases/download/$(LIBMAXMINDDB_VERSION) LIBMAXMINDDB_INSTALL_STAGING = YES From peter at korsgaard.com Fri Oct 14 13:47:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:21 +0200 Subject: [Buildroot] [git commit] configs/visionfive_defconfig: new defconfig Message-ID: <20221014135306.64CE286CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3cc157e2e3c80027c69819f82d8bfe37bfb04049 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a defconfig for the Starfive VisionFive board, a board built around the Starfive JH7100 RISC-V 64bit SoC (same as Beaglev). This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (6.0 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3 and misses some variables, so we provide a uEnv.txt to fix that up, based on what is done in provided Fedora image. Signed-off-by: Peter Korsgaard --- DEVELOPERS | 2 ++ board/visionfive/genimage.cfg | 21 ++++++++++++++ .../visionfive/overlay/boot/extlinux/extlinux.conf | 4 +++ board/visionfive/overlay/boot/uEnv.txt | 15 ++++++++++ board/visionfive/readme.txt | 32 ++++++++++++++++++++++ configs/visionfive_defconfig | 17 ++++++++++++ 6 files changed, 91 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 59121c6a54..bfde353c8a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2310,6 +2310,7 @@ F: board/openblocks/a6/ F: board/orangepi/ F: board/pandaboard/ F: board/roseapplepi/ +F: board/visionfive/ F: boot/shim/ F: boot/sun20i-d1-spl/ F: configs/avenger96_defconfig @@ -2324,6 +2325,7 @@ F: configs/orangepi_r1_defconfig F: configs/pandaboard_defconfig F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig +F: configs/visionfive_defconfig F: package/bats-core/ F: package/docker-compose/ F: package/dump1090/ diff --git a/board/visionfive/genimage.cfg b/board/visionfive/genimage.cfg new file mode 100644 index 0000000000..433387c901 --- /dev/null +++ b/board/visionfive/genimage.cfg @@ -0,0 +1,21 @@ +# Minimal SD card image for the Starfive VisionFive board + +image sdcard.img { + hdimage { + } + + # u-boot is hard coded to look at 3rd partition + partition dummy1 { + size = 512 + } + + partition dummy2 { + size = 512 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + bootable = "true" + } +} diff --git a/board/visionfive/overlay/boot/extlinux/extlinux.conf b/board/visionfive/overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..44ac6f7944 --- /dev/null +++ b/board/visionfive/overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label linux + kernel /boot/Image + devicetree /boot/jh7100-starfive-visionfive-v1.dtb + append console=ttyS0,115200 root=/dev/mmcblk0p3 diff --git a/board/visionfive/overlay/boot/uEnv.txt b/board/visionfive/overlay/boot/uEnv.txt new file mode 100644 index 0000000000..b831d2d230 --- /dev/null +++ b/board/visionfive/overlay/boot/uEnv.txt @@ -0,0 +1,15 @@ +fdt_high=0xffffffffffffffff +initrd_high=0xffffffffffffffff + +scriptaddr=0x88100000 +script_offset_f=0x1fff000 +script_size_f=0x1000 + +kernel_addr_r=0x84000000 +kernel_comp_addr_r=0x90000000 +kernel_comp_size=0x10000000 + +fdt_addr_r=0x88000000 +ramdisk_addr_r=0x88300000 + +bootcmd=devnum=0; run mmc_boot diff --git a/board/visionfive/readme.txt b/board/visionfive/readme.txt new file mode 100644 index 0000000000..7aefa24167 --- /dev/null +++ b/board/visionfive/readme.txt @@ -0,0 +1,32 @@ +Starfive VisionFive +=================== + +The VisionFive is a low-cost RISC-V 64-bit based platform, powered by a +Starfive JH7100 processor. + +https://doc-en.rvspace.org/Doc_Center/visionfive.html + +How to build +============ + +$ make visionfive_defconfig +$ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Preparing the board +=================== + +Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). + +Insert your SD card. + +Power-up the board using an USB-C cable. diff --git a/configs/visionfive_defconfig b/configs/visionfive_defconfig new file mode 100644 index 0000000000..9f5fb03610 --- /dev/null +++ b/configs/visionfive_defconfig @@ -0,0 +1,17 @@ +BR2_riscv=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/visionfive/overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/visionfive/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,cfcb617265422c0af0ae5bc9688dceba2d10b27a)/linux-cfcb617265422c0af0ae5bc9688dceba2d10b27a.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="visionfive" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-starfive-visionfive-v1" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_GENIMAGE=y From peter at korsgaard.com Fri Oct 14 13:48:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:02 +0200 Subject: [Buildroot] [git commit] package/cppzmq: bump to version 4.9.0 Message-ID: <20221014135306.951EB86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6b1efb7bd547f6b48c89db08ff19fa55bd07a1cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/zeromq/cppzmq/releases/tag/v4.9.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/cppzmq/cppzmq.hash | 2 +- package/cppzmq/cppzmq.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/cppzmq/cppzmq.hash b/package/cppzmq/cppzmq.hash index 31b93275df..3fbee7af28 100644 --- a/package/cppzmq/cppzmq.hash +++ b/package/cppzmq/cppzmq.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7a23639a45f3a0049e11a188e29aaedd10b2f4845f0000cf3e22d6774ebde0af cppzmq-4.8.1.tar.gz +sha256 3fdf5b100206953f674c94d40599bdb3ea255244dcc42fab0d75855ee3645581 cppzmq-4.9.0.tar.gz sha256 7e6db90e2e805c72b3daa77849d1cb5f1f92da0e69750c8a4aa1d86d70704748 LICENSE diff --git a/package/cppzmq/cppzmq.mk b/package/cppzmq/cppzmq.mk index 570ad4e3a3..d702cc174e 100644 --- a/package/cppzmq/cppzmq.mk +++ b/package/cppzmq/cppzmq.mk @@ -4,7 +4,7 @@ # ################################################################################ -CPPZMQ_VERSION = 4.8.1 +CPPZMQ_VERSION = 4.9.0 CPPZMQ_SITE = $(call github,zeromq,cppzmq,v$(CPPZMQ_VERSION)) CPPZMQ_INSTALL_STAGING = YES CPPZMQ_DEPENDENCIES = host-pkgconf zeromq From peter at korsgaard.com Fri Oct 14 13:47:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:47:46 +0200 Subject: [Buildroot] [git commit] package/openssh: security bump to version 9.1p1 Message-ID: <20221014135306.8752886CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) From peter at korsgaard.com Fri Oct 14 13:51:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:05 +0200 Subject: [Buildroot] [git commit] package/gmrender-resurrect: bump to version 0.1 Message-ID: <20221014135306.E8A7A86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=771e92d01d81fc983c4d3cce5f2de2b419b56114 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master gmrender-resurrect uses threads since https://github.com/hzeller/gmrender-resurrect/commit/8871dfd2490f04e319ce6465fd2a7a8b2c78a6de https://github.com/hzeller/gmrender-resurrect/compare/v0.0.9...v0.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gmrender-resurrect/Config.in | 2 +- package/gmrender-resurrect/gmrender-resurrect.hash | 2 +- package/gmrender-resurrect/gmrender-resurrect.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gmrender-resurrect/Config.in b/package/gmrender-resurrect/Config.in index db655ad7f4..de52410a73 100644 --- a/package/gmrender-resurrect/Config.in +++ b/package/gmrender-resurrect/Config.in @@ -1,7 +1,7 @@ config BR2_PACKAGE_GMRENDER_RESURRECT bool "gmrender-resurrect" depends on BR2_USE_WCHAR # gstreamer1 -> libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer1 -> libglib2, libupnp + depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_MMU # gstreamer1 select BR2_PACKAGE_GSTREAMER1 select BR2_PACKAGE_GST1_PLUGINS_BASE # run-time only diff --git a/package/gmrender-resurrect/gmrender-resurrect.hash b/package/gmrender-resurrect/gmrender-resurrect.hash index 526b2b6c34..f14abffc3b 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.hash +++ b/package/gmrender-resurrect/gmrender-resurrect.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c3a9c80c7058a9a1f32175da25a564fb3021a7055c2df3941e8da8860a509009 gmrender-resurrect-0.0.9.tar.gz +sha256 550b07bc6a073176ad7de0efd603663c9875311dfb81ae1075263e3fd6974335 gmrender-resurrect-0.1.tar.gz sha256 c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42 COPYING diff --git a/package/gmrender-resurrect/gmrender-resurrect.mk b/package/gmrender-resurrect/gmrender-resurrect.mk index 4a7efd71ab..77ac83ca41 100644 --- a/package/gmrender-resurrect/gmrender-resurrect.mk +++ b/package/gmrender-resurrect/gmrender-resurrect.mk @@ -4,7 +4,7 @@ # ################################################################################ -GMRENDER_RESURRECT_VERSION = 0.0.9 +GMRENDER_RESURRECT_VERSION = 0.1 GMRENDER_RESURRECT_SITE = $(call github,hzeller,gmrender-resurrect,v$(GMRENDER_RESURRECT_VERSION)) # Original distribution does not have default configure, # so we need to autoreconf: From peter at korsgaard.com Fri Oct 14 13:49:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:09 +0200 Subject: [Buildroot] [git commit] package/checksec: bump to version 2.6.0 Message-ID: <20221014135306.B5C1786CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d5dc2bdf5895770a26617e58f1e61668ee564261 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE.txt (update in year with https://github.com/slimm609/checksec.sh/commit/24a81d33b9bc600c676ed96c183e87181e514844) https://github.com/slimm609/checksec.sh/releases/tag/2.6.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/checksec/checksec.hash | 4 ++-- package/checksec/checksec.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/checksec/checksec.hash b/package/checksec/checksec.hash index 41aae8188c..a29866ba07 100644 --- a/package/checksec/checksec.hash +++ b/package/checksec/checksec.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1034459d7cd2b0ee515c2b6b003375fec566fb59c838fc5e1961e1fcf76b54fa checksec-2.5.0.tar.gz -sha256 7888fee828bf56d547fc1f634e40638984148b4fc41373b7626eb465060640de LICENSE.txt +sha256 39d4158f96bdc7533ad6595703375c0046951fe4f6367b831ef92d9c66c1a307 checksec-2.6.0.tar.gz +sha256 55154b4be6dfcb3ff29d1e3648d0d07b3943a5fcc3af7c2e0e799b074734f722 LICENSE.txt diff --git a/package/checksec/checksec.mk b/package/checksec/checksec.mk index 61ef110f90..ed9846ac2d 100644 --- a/package/checksec/checksec.mk +++ b/package/checksec/checksec.mk @@ -4,7 +4,7 @@ # ################################################################################ -CHECKSEC_VERSION = 2.5.0 +CHECKSEC_VERSION = 2.6.0 CHECKSEC_SITE = $(call github,slimm609,checksec.sh,$(CHECKSEC_VERSION)) CHECKSEC_LICENSE = BSD-3-Clause CHECKSEC_LICENSE_FILES = LICENSE.txt From peter at korsgaard.com Fri Oct 14 13:49:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:49:44 +0200 Subject: [Buildroot] [git commit] package/freeipmi: bump to version 1.6.10 Message-ID: <20221014135306.C904A86CA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f0faa3b71c585cb70bcd6fa4bafb756b98130bd5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://github.com/chu11/freeipmi-mirror/blob/freeipmi-1-6-10/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...eipmi-rename-md2-and-md5-functions-macros.patch | 695 --------------------- package/freeipmi/freeipmi.hash | 2 +- package/freeipmi/freeipmi.mk | 2 +- 3 files changed, 2 insertions(+), 697 deletions(-) diff --git a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch b/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch deleted file mode 100644 index 0de5b29c9c..0000000000 --- a/package/freeipmi/0001-libfreeipmi-rename-md2-and-md5-functions-macros.patch +++ /dev/null @@ -1,695 +0,0 @@ -From 50eeda7f14c4eaa56aa86ba570a47557456544f2 Mon Sep 17 00:00:00 2001 -From: Albert Chu -Date: Wed, 19 Jan 2022 11:55:55 -0800 -Subject: [PATCH] libfreeipmi: rename md2 and md5 functions / macros - -Static compilation with libfreeipmi can lead to problems if -other software has similarly named md2/md5 functions -(such as md5_init()). Prefix all macros and functions with -'ipmi_' as needed. Update all callers accordingly. - -[Retrieved from: -https://github.com/chu11/freeipmi-mirror/commit/50eeda7f14c4eaa56aa86ba570a47557456544f2] -Signed-off-by: Fabrice Fontaine ---- - ChangeLog | 11 ++ - libfreeipmi/interface/ipmi-lan-interface.c | 48 +++---- - .../interface/ipmi-rmcpplus-interface.c | 2 +- - libfreeipmi/libcommon/ipmi-md2.c | 72 +++++------ - libfreeipmi/libcommon/ipmi-md2.h | 30 ++--- - libfreeipmi/libcommon/ipmi-md5.c | 64 +++++----- - libfreeipmi/libcommon/ipmi-md5.h | 18 +-- - libfreeipmi/util/ipmi-lan-util.c | 120 +++++++++--------- - 8 files changed, 188 insertions(+), 177 deletions(-) - -diff --git a/ChangeLog b/ChangeLog -index 883a195cf..60bf8c323 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,14 @@ -+2021-01-19 Albert Chu -+ -+ * libfreeipmi/libcommon/ipmi-md2.h, -+ libfreeipmi/libcommon/ipmi-md2.c, -+ libfreeipmi/libcommon/ipmi-md5.h, -+ libfreeipmi/libcommon/ipmi-md5.c: Static compilation with -+ libfreeipmi can lead to problems if other software has similarly -+ named md2/md5 functions (such as md5_init()). Prefix all macros -+ and functions with 'ipmi_' as needed. Update all callers -+ accordingly. -+ - 2022-01-18 Fabrice Fontaine - - * configure.ac: use pkg-config to find gcrypt -diff --git a/libfreeipmi/interface/ipmi-lan-interface.c b/libfreeipmi/interface/ipmi-lan-interface.c -index 20099d770..658be53e1 100644 ---- a/libfreeipmi/interface/ipmi-lan-interface.c -+++ b/libfreeipmi/interface/ipmi-lan-interface.c -@@ -533,37 +533,37 @@ assemble_ipmi_lan_pkt (fiid_obj_t obj_rmcp_hdr, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- uint8_t digest[MD2_DIGEST_LENGTH]; -+ ipmi_md2_t ctx; -+ uint8_t digest[IPMI_MD2_DIGEST_LENGTH]; - -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); - -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, msg_data_ptr, msg_data_count); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, digest, MD2_DIGEST_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, digest, IPMI_MD2_DIGEST_LENGTH); -+ ipmi_md2_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- uint8_t digest[MD5_DIGEST_LENGTH]; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, msg_data_ptr, msg_data_count); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, digest, MD5_DIGEST_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ uint8_t digest[IPMI_MD5_DIGEST_LENGTH]; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, msg_data_ptr, msg_data_count); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, digest, IPMI_MD5_DIGEST_LENGTH); -+ ipmi_md5_init (&ctx); - - memcpy (authentication_code_field_ptr, digest, IPMI_1_5_MAX_PASSWORD_LENGTH); - } -diff --git a/libfreeipmi/interface/ipmi-rmcpplus-interface.c b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -index 1f462da7e..d1fd0753a 100644 ---- a/libfreeipmi/interface/ipmi-rmcpplus-interface.c -+++ b/libfreeipmi/interface/ipmi-rmcpplus-interface.c -@@ -1134,7 +1134,7 @@ _construct_session_trlr_authentication_code (uint8_t integrity_algorithm, - { - hash_algorithm = IPMI_CRYPT_HASH_MD5; - hash_flags = 0; -- expected_digest_len = MD5_DIGEST_LENGTH; -+ expected_digest_len = IPMI_MD5_DIGEST_LENGTH; - copy_digest_len = IPMI_MD5_128_AUTHENTICATION_CODE_LENGTH; - } - else /* IPMI_INTEGRITY_ALGORITHM_HMAC_SHA256_128 */ -diff --git a/libfreeipmi/libcommon/ipmi-md2.c b/libfreeipmi/libcommon/ipmi-md2.c -index 6e9386be7..076b555bd 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.c -+++ b/libfreeipmi/libcommon/ipmi-md2.c -@@ -101,15 +101,15 @@ static unsigned char S[256] = - 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14 - }; - --#define L ctx->l --#define X ctx->x --#define C ctx->c --#define M ctx->m --#define Mlen ctx->mlen --#define MD2_MAGIC 0xf00fd00d -+#define L ctx->l -+#define X ctx->x -+#define C ctx->c -+#define M ctx->m -+#define Mlen ctx->mlen -+#define IPMI_MD2_MAGIC 0xf00fd00d - - int --md2_init (md2_t *ctx) -+ipmi_md2_init (ipmi_md2_t *ctx) - { - - if (ctx == NULL) -@@ -118,26 +118,26 @@ md2_init (md2_t *ctx) - return (-1); - } - -- ctx->magic = MD2_MAGIC; -+ ctx->magic = IPMI_MD2_MAGIC; - - L = 0; - Mlen = 0; -- memset (X, '\0', MD2_BUFFER_LENGTH); -- memset (C, '\0', MD2_CHKSUM_LENGTH); -- memset (M, '\0', MD2_BLOCK_LENGTH); -+ memset (X, '\0', IPMI_MD2_BUFFER_LENGTH); -+ memset (C, '\0', IPMI_MD2_CHKSUM_LENGTH); -+ memset (M, '\0', IPMI_MD2_BLOCK_LENGTH); - - return (0); - } - - static void --_md2_update_digest_and_checksum (md2_t *ctx) -+_ipmi_md2_update_digest_and_checksum (ipmi_md2_t *ctx) - { - unsigned int j, k; - uint8_t c, t; - - /* Update X */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - X[16+j] = M[j]; - X[32+j] = (X[16+j] ^ X[j]); -@@ -145,9 +145,9 @@ _md2_update_digest_and_checksum (md2_t *ctx) - - t = 0; - -- for (j = 0; j < MD2_ROUNDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_ROUNDS_LENGTH; j++) - { -- for (k = 0; k < MD2_BUFFER_LENGTH; k++) -+ for (k = 0; k < IPMI_MD2_BUFFER_LENGTH; k++) - { - t = X[k] = (X[k] ^ S[t]); - } -@@ -166,7 +166,7 @@ _md2_update_digest_and_checksum (md2_t *ctx) - * Set C[j] to C[j] xor S[c xor L]. - */ - -- for (j = 0; j < MD2_BLOCK_LENGTH; j++) -+ for (j = 0; j < IPMI_MD2_BLOCK_LENGTH; j++) - { - c = M[j]; - C[j] = C[j] ^ S[c ^ L]; -@@ -175,10 +175,10 @@ _md2_update_digest_and_checksum (md2_t *ctx) - } - - int --md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD2_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -187,19 +187,19 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD2_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD2_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD2_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD2_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md2_update_digest_and_checksum (ctx); -+ _ipmi_md2_update_digest_and_checksum (ctx); - -- while ((buflen - bufcount) >= MD2_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD2_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD2_BLOCK_LENGTH); -- bufcount += MD2_BLOCK_LENGTH; -- _md2_update_digest_and_checksum (ctx); -+ memcpy (M, buf + bufcount, IPMI_MD2_BLOCK_LENGTH); -+ bufcount += IPMI_MD2_BLOCK_LENGTH; -+ _ipmi_md2_update_digest_and_checksum (ctx); - } - - Mlen = buflen - bufcount; -@@ -217,33 +217,33 @@ md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen) - } - - static void --_md2_append_padding_and_checksum (md2_t *ctx) -+_ipmi_md2_append_padding_and_checksum (ipmi_md2_t *ctx) - { - unsigned int padlen; - int padindex; - -- padlen = MD2_PADDING_LENGTH - Mlen; -+ padlen = IPMI_MD2_PADDING_LENGTH - Mlen; - padindex = padlen - 1; - -- md2_update_data (ctx, padding[padindex], padlen); -+ ipmi_md2_update_data (ctx, padding[padindex], padlen); - -- md2_update_data (ctx, C, MD2_CHKSUM_LENGTH); -+ ipmi_md2_update_data (ctx, C, IPMI_MD2_CHKSUM_LENGTH); - } - - int --md2_finish (md2_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen) - { -- if (ctx == NULL || ctx->magic != MD2_MAGIC -- || digest == NULL || digestlen < MD2_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD2_MAGIC -+ || digest == NULL || digestlen < IPMI_MD2_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md2_append_padding_and_checksum (ctx); -- memcpy (digest, X, MD2_DIGEST_LENGTH); -+ _ipmi_md2_append_padding_and_checksum (ctx); -+ memcpy (digest, X, IPMI_MD2_DIGEST_LENGTH); - -- ctx->magic = ~MD2_MAGIC; -- return (MD2_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD2_MAGIC; -+ return (IPMI_MD2_DIGEST_LENGTH); - } - -diff --git a/libfreeipmi/libcommon/ipmi-md2.h b/libfreeipmi/libcommon/ipmi-md2.h -index c102fce2c..05328e85e 100644 ---- a/libfreeipmi/libcommon/ipmi-md2.h -+++ b/libfreeipmi/libcommon/ipmi-md2.h -@@ -34,26 +34,26 @@ - - #include - --#define MD2_BLOCK_LENGTH 16 --#define MD2_BUFFER_LENGTH 48 --#define MD2_CHKSUM_LENGTH 16 --#define MD2_DIGEST_LENGTH 16 --#define MD2_PADDING_LENGTH 16 --#define MD2_ROUNDS_LENGTH 18 -- --typedef struct __md2 { -+#define IPMI_MD2_BLOCK_LENGTH 16 -+#define IPMI_MD2_BUFFER_LENGTH 48 -+#define IPMI_MD2_CHKSUM_LENGTH 16 -+#define IPMI_MD2_DIGEST_LENGTH 16 -+#define IPMI_MD2_PADDING_LENGTH 16 -+#define IPMI_MD2_ROUNDS_LENGTH 18 -+ -+typedef struct __ipmi_md2 { - uint32_t magic; - uint8_t l; - unsigned int mlen; -- uint8_t x[MD2_BUFFER_LENGTH]; -- uint8_t c[MD2_CHKSUM_LENGTH]; -- uint8_t m[MD2_BLOCK_LENGTH]; --} md2_t; -+ uint8_t x[IPMI_MD2_BUFFER_LENGTH]; -+ uint8_t c[IPMI_MD2_CHKSUM_LENGTH]; -+ uint8_t m[IPMI_MD2_BLOCK_LENGTH]; -+} ipmi_md2_t; - --int md2_init (md2_t *ctx); -+int ipmi_md2_init (ipmi_md2_t *ctx); - --int md2_update_data (md2_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md2_update_data (ipmi_md2_t *ctx, const void *buf, unsigned int buflen); - --int md2_finish (md2_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md2_finish (ipmi_md2_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD2_H */ -diff --git a/libfreeipmi/libcommon/ipmi-md5.c b/libfreeipmi/libcommon/ipmi-md5.c -index 17073b85f..c84e350a6 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.c -+++ b/libfreeipmi/libcommon/ipmi-md5.c -@@ -92,7 +92,7 @@ static uint32_t T[64] = - #define D ctx->d - #define M ctx->m - #define Mlen ctx->mlen --#define MD5_MAGIC 0xfb0fdb0d -+#define IPMI_MD5_MAGIC 0xfb0fdb0d - - #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) - #define G(x,y,z) (((x) & (z)) | ((y) & (~(z)))) -@@ -126,7 +126,7 @@ static uint32_t T[64] = - } while (0) - - int --md5_init (md5_t *ctx) -+ipmi_md5_init (ipmi_md5_t *ctx) - { - if (ctx == NULL) - { -@@ -134,13 +134,13 @@ md5_init (md5_t *ctx) - return (-1); - } - -- ctx->magic = MD5_MAGIC; -+ ctx->magic = IPMI_MD5_MAGIC; - - Mlen = 0; - ctx->bytes_mod_64 = 0; - ctx->bit_count[0] = 0; - ctx->bit_count[1] = 0; -- memset (M, '\0', MD5_BLOCK_LENGTH); -+ memset (M, '\0', IPMI_MD5_BLOCK_LENGTH); - - /* initial values are listed low-order byte first */ - A = 0x67452301; -@@ -152,16 +152,16 @@ md5_init (md5_t *ctx) - } - - static void --_md5_update_digest (md5_t *ctx) -+_ipmi_md5_update_digest (ipmi_md5_t *ctx) - { - uint32_t AA, BB, CC, DD; -- uint32_t X[MD5_BLOCK_WORDS_LENGTH]; -+ uint32_t X[IPMI_MD5_BLOCK_WORDS_LENGTH]; - unsigned int j; - - /* Note there are no endian issues here, compiler is required to - * handle shifts correctly - */ -- for (j = 0; j < MD5_BLOCK_WORDS_LENGTH; j++) -+ for (j = 0; j < IPMI_MD5_BLOCK_WORDS_LENGTH; j++) - X[j] = ((uint32_t)M[j*4] - | ((uint32_t)M[j*4+1] << 8) - | ((uint32_t)M[j*4+2] << 16) -@@ -251,7 +251,7 @@ _md5_update_digest (md5_t *ctx) - } - - static void --_md5_update_count (md5_t *ctx, unsigned int buflen) -+_ipmi_md5_update_count (ipmi_md5_t *ctx, unsigned int buflen) - { - - /* Use two uint32_t integers to hold our 64 bit count. -@@ -272,10 +272,10 @@ _md5_update_count (md5_t *ctx, unsigned int buflen) - } - - int --md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) -+ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen) - { - -- if (ctx == NULL || ctx->magic != MD5_MAGIC || buf == NULL) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC || buf == NULL) - { - errno = EINVAL; - return (-1); -@@ -284,28 +284,28 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - if (buflen == 0) - return (0); - -- if ((Mlen + buflen) >= MD5_BLOCK_LENGTH) -+ if ((Mlen + buflen) >= IPMI_MD5_BLOCK_LENGTH) - { - unsigned int bufcount; - -- bufcount = (MD5_BLOCK_LENGTH - Mlen); -+ bufcount = (IPMI_MD5_BLOCK_LENGTH - Mlen); - memcpy (M + Mlen, buf, bufcount); -- _md5_update_digest (ctx); -- _md5_update_count (ctx, bufcount); -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, bufcount); - -- while ((buflen - bufcount) >= MD5_BLOCK_LENGTH) -+ while ((buflen - bufcount) >= IPMI_MD5_BLOCK_LENGTH) - { -- memcpy (M, buf + bufcount, MD5_BLOCK_LENGTH); -- bufcount += MD5_BLOCK_LENGTH; -- _md5_update_digest (ctx); -- _md5_update_count (ctx, MD5_BLOCK_LENGTH); -+ memcpy (M, buf + bufcount, IPMI_MD5_BLOCK_LENGTH); -+ bufcount += IPMI_MD5_BLOCK_LENGTH; -+ _ipmi_md5_update_digest (ctx); -+ _ipmi_md5_update_count (ctx, IPMI_MD5_BLOCK_LENGTH); - } - - Mlen = buflen - bufcount; - if (Mlen > 0) - { - memcpy (M, buf + bufcount, Mlen); -- _md5_update_count (ctx, Mlen); -+ _ipmi_md5_update_count (ctx, Mlen); - } - } - else -@@ -313,14 +313,14 @@ md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen) - /* Not enough data to update digest, just copy in data */ - memcpy (M + Mlen, buf, buflen); - Mlen += buflen; -- _md5_update_count (ctx, buflen); -+ _ipmi_md5_update_count (ctx, buflen); - } - - return (buflen); - } - - static void --_md5_append_padding_and_length (md5_t *ctx) -+_ipmi_md5_append_padding_and_length (ipmi_md5_t *ctx) - { - unsigned int padlen; - char length[8]; -@@ -348,23 +348,23 @@ _md5_append_padding_and_length (md5_t *ctx) - length[6] = (ctx->bit_count[0] & 0x00ff0000) >> 16; - length[7] = (ctx->bit_count[0] & 0xff000000) >> 24; - -- md5_update_data (ctx, padding, padlen); -- md5_update_data (ctx, length, 8); -+ ipmi_md5_update_data (ctx, padding, padlen); -+ ipmi_md5_update_data (ctx, length, 8); - } - - int --md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) -+ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen) - { -- uint8_t buf[MD5_DIGEST_LENGTH]; -+ uint8_t buf[IPMI_MD5_DIGEST_LENGTH]; - -- if (ctx == NULL || ctx->magic != MD5_MAGIC -- || digest == NULL || digestlen < MD5_DIGEST_LENGTH) -+ if (ctx == NULL || ctx->magic != IPMI_MD5_MAGIC -+ || digest == NULL || digestlen < IPMI_MD5_DIGEST_LENGTH) - { - errno = EINVAL; - return (-1); - } - -- _md5_append_padding_and_length (ctx); -+ _ipmi_md5_append_padding_and_length (ctx); - - /* Note there are no endian issues here, compiler is required to - * handle bitmasks and shifts correctly -@@ -387,7 +387,7 @@ md5_finish (md5_t *ctx, void *digest, unsigned int digestlen) - buf[14] = (D & 0x00ff0000) >> 16; - buf[15] = (D & 0xff000000) >> 24; - -- memcpy (digest, buf, MD5_DIGEST_LENGTH); -- ctx->magic = ~MD5_MAGIC; -- return (MD5_DIGEST_LENGTH); -+ memcpy (digest, buf, IPMI_MD5_DIGEST_LENGTH); -+ ctx->magic = ~IPMI_MD5_MAGIC; -+ return (IPMI_MD5_DIGEST_LENGTH); - } -diff --git a/libfreeipmi/libcommon/ipmi-md5.h b/libfreeipmi/libcommon/ipmi-md5.h -index 0f86f1754..6b863ef36 100644 ---- a/libfreeipmi/libcommon/ipmi-md5.h -+++ b/libfreeipmi/libcommon/ipmi-md5.h -@@ -34,11 +34,11 @@ - - #include - --#define MD5_BLOCK_LENGTH 64 --#define MD5_BLOCK_WORDS_LENGTH (MD5_BLOCK_LENGTH/4) --#define MD5_DIGEST_LENGTH 16 -+#define IPMI_MD5_BLOCK_LENGTH 64 -+#define IPMI_MD5_BLOCK_WORDS_LENGTH (IPMI_MD5_BLOCK_LENGTH/4) -+#define IPMI_MD5_DIGEST_LENGTH 16 - --typedef struct __md5 { -+typedef struct __ipmi_md5 { - uint32_t magic; - unsigned int mlen; - unsigned int bytes_mod_64; -@@ -47,13 +47,13 @@ typedef struct __md5 { - uint32_t b; - uint32_t c; - uint32_t d; -- uint8_t m[MD5_BLOCK_LENGTH]; --} md5_t; -+ uint8_t m[IPMI_MD5_BLOCK_LENGTH]; -+} ipmi_md5_t; - --int md5_init (md5_t *ctx); -+int ipmi_md5_init (ipmi_md5_t *ctx); - --int md5_update_data (md5_t *ctx, const void *buf, unsigned int buflen); -+int ipmi_md5_update_data (ipmi_md5_t *ctx, const void *buf, unsigned int buflen); - --int md5_finish (md5_t *ctx, void *digest, unsigned int digestlen); -+int ipmi_md5_finish (ipmi_md5_t *ctx, void *digest, unsigned int digestlen); - - #endif /* IPMI_MD5_H */ -diff --git a/libfreeipmi/util/ipmi-lan-util.c b/libfreeipmi/util/ipmi-lan-util.c -index cd269fcb9..a374acc8d 100644 ---- a/libfreeipmi/util/ipmi-lan-util.c -+++ b/libfreeipmi/util/ipmi-lan-util.c -@@ -281,33 +281,33 @@ ipmi_lan_check_session_authentication_code (fiid_obj_t obj_lan_session_hdr_rs, - - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, session_id_buf, session_id_len); -- md2_update_data (&ctx, buf, len); -- md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md2_update_data (&ctx, buf, len); -+ ipmi_md2_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, session_id_buf, session_id_len); -- md5_update_data (&ctx, buf, len); -- md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, session_id_buf, session_id_len); -+ ipmi_md5_update_data (&ctx, buf, len); -+ ipmi_md5_update_data (&ctx, session_sequence_number_buf, session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_calc, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - -@@ -451,45 +451,45 @@ ipmi_lan_check_packet_session_authentication_code (const void *pkt, - memcpy (pwbuf, authentication_code_data, authentication_code_data_len); - if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD2) - { -- md2_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD2_DIGEST_LENGTH); -- -- md2_init (&ctx); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md2_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md2_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md2_init (&ctx); -+ ipmi_md2_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD2_DIGEST_LENGTH); -+ -+ ipmi_md2_init (&ctx); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md2_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md2_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md2_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md2_init (&ctx); - } - else if (authentication_type == IPMI_AUTHENTICATION_TYPE_MD5) - { -- md5_t ctx; -- -- assert (IPMI_1_5_MAX_PASSWORD_LENGTH == MD5_DIGEST_LENGTH); -- -- md5_init (&ctx); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_update_data (&ctx, -- pkt + session_id_offset, -- session_id_len); -- md5_update_data (&ctx, -- pkt + data_offset, -- pkt_len - data_offset); -- md5_update_data (&ctx, -- pkt + session_sequence_number_offset, -- session_sequence_number_len); -- md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -- md5_init (&ctx); -+ ipmi_md5_t ctx; -+ -+ assert (IPMI_1_5_MAX_PASSWORD_LENGTH == IPMI_MD5_DIGEST_LENGTH); -+ -+ ipmi_md5_init (&ctx); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_id_offset, -+ session_id_len); -+ ipmi_md5_update_data (&ctx, -+ pkt + data_offset, -+ pkt_len - data_offset); -+ ipmi_md5_update_data (&ctx, -+ pkt + session_sequence_number_offset, -+ session_sequence_number_len); -+ ipmi_md5_update_data (&ctx, pwbuf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_finish (&ctx, authentication_code_buf, IPMI_1_5_MAX_PASSWORD_LENGTH); -+ ipmi_md5_init (&ctx); - } - } - else /* authentication_type == IPMI_AUTHENTICATION_TYPE_STRAIGHT_PASSWORD_KEY diff --git a/package/freeipmi/freeipmi.hash b/package/freeipmi/freeipmi.hash index 05fb50bd4c..bc22d2ff6b 100644 --- a/package/freeipmi/freeipmi.hash +++ b/package/freeipmi/freeipmi.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 f25e1c35f3d0f1b5a99cc31ecc2353ca83ed46a15163842fba870127dc9c8206 freeipmi-1.6.9.tar.gz +sha256 fce4a1e401b6189c103d2b1203261d0bfbf45985c6f3fa44c51b186b13fe7a7d freeipmi-1.6.10.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.bmc-watchdog sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING.ipmiconsole diff --git a/package/freeipmi/freeipmi.mk b/package/freeipmi/freeipmi.mk index b26ed0c0bf..916f2eb68a 100644 --- a/package/freeipmi/freeipmi.mk +++ b/package/freeipmi/freeipmi.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREEIPMI_VERSION = 1.6.9 +FREEIPMI_VERSION = 1.6.10 FREEIPMI_SITE = https://ftp.gnu.org/gnu/freeipmi FREEIPMI_LICENSE = GPL-3.0+, BSD-like (sunbmc) FREEIPMI_LICENSE_FILES = \ From peter at korsgaard.com Fri Oct 14 13:48:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:48:49 +0200 Subject: [Buildroot] [git commit] package/vim: security bump to version 9.0.0709 Message-ID: <20221014135306.A460A86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c2940513298fdb5a6e582916128e914243c784f5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Fri Oct 14 13:51:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:41 +0200 Subject: [Buildroot] [git commit] package/isl: bump to version 0.25 Message-ID: <20221014135307.1423886CA9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7b04fcea33a809dfd60bf60c5df1fc6f89555e74 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://groups.google.com/g/isl-announce/c/GkHKH-nVWw8 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/isl/isl.hash | 2 +- package/isl/isl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/isl/isl.hash b/package/isl/isl.hash index 001fc9d115..46d8e920f3 100644 --- a/package/isl/isl.hash +++ b/package/isl/isl.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 043105cc544f416b48736fff8caf077fb0663a717d06b1113f16e391ac99ebad isl-0.24.tar.xz +sha256 be7b210647ccadf90a2f0b000fca11a4d40546374a850db67adb32fad4b230d9 isl-0.25.tar.xz sha256 3a2c398103f6bca0f50a9a9465deca9230b370b0212af5fdf31ed88a36215c30 LICENSE diff --git a/package/isl/isl.mk b/package/isl/isl.mk index 51e608b304..ce9aaecebc 100644 --- a/package/isl/isl.mk +++ b/package/isl/isl.mk @@ -4,7 +4,7 @@ # ################################################################################ -ISL_VERSION = 0.24 +ISL_VERSION = 0.25 ISL_SOURCE = isl-$(ISL_VERSION).tar.xz ISL_SITE = https://libisl.sourceforge.io ISL_LICENSE = MIT From peter at korsgaard.com Fri Oct 14 13:50:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:50:18 +0200 Subject: [Buildroot] [git commit] package/gesftpserver: bump to version 2 Message-ID: <20221014135306.D97EE86CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=026265bf7e09e0348aefa79e7a1f32add925f23b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Replace rjk_cv_python24 by rjk_cv_python3 due to https://github.com/ewxrjk/sftpserver/commit/6c0b4852a3654747e88f457a37b20530c5e426ca http://www.chiark.greenend.org.uk/pipermail/sgo-software-announce/2022/000070.html https://github.com/ewxrjk/sftpserver/blob/2/CHANGES.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...r-of-v3-attributes-according-to-draft-iet.patch | 30 ---------------------- package/gesftpserver/gesftpserver.hash | 2 +- package/gesftpserver/gesftpserver.mk | 4 +-- 3 files changed, 3 insertions(+), 33 deletions(-) diff --git a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch b/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch deleted file mode 100644 index 3697d0e525..0000000000 --- a/package/gesftpserver/0001-Change-order-of-v3-attributes-according-to-draft-iet.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4b5c7eb63894bd2b1fedeb2a8e9bd16bf3c8c555 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Bernd=20Holzm=C3=BCller?= - -Date: Mon, 11 Feb 2019 23:57:01 +0100 -Subject: [PATCH] Change order of v3-attributes according to - draft-ietf-secsh-filexfer-00/02 - -[yann.morin.1998 at free.fr: backport from upstream] -Signed-off-by: "Yann E. MORIN" ---- - v3.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/v3.c b/v3.c -index 57cc31e..1fd86ad 100644 ---- a/v3.c -+++ b/v3.c -@@ -121,8 +121,8 @@ static void v3_sendattrs(struct sftpjob *job, const struct sftpattr *attrs) { - fatal("sending out-of-range mtime"); - if(a != attrs->atime.seconds) - fatal("sending out-of-range mtime"); -- sftp_send_uint32(job->worker, m); - sftp_send_uint32(job->worker, a); -+ sftp_send_uint32(job->worker, m); - } - /* Note that we just discard unknown bits rather than reporting errors. */ - } --- -2.14.1 - diff --git a/package/gesftpserver/gesftpserver.hash b/package/gesftpserver/gesftpserver.hash index 790cbe97c2..6d910a84dd 100644 --- a/package/gesftpserver/gesftpserver.hash +++ b/package/gesftpserver/gesftpserver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4963b85787de3485085a5356c671c58b8b33125f528ff1b2fe8b534ed8a0c1bd sftpserver-1.tar.gz +sha256 b18b10405ef2b05c45450aafd6803f69efb4d2138e4e07fd186c1618027ee169 sftpserver-2.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index 20ad92d25a..b47ec1c5d3 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -4,7 +4,7 @@ # ################################################################################ -GESFTPSERVER_VERSION = 1 +GESFTPSERVER_VERSION = 2 GESFTPSERVER_SOURCE = sftpserver-$(GESFTPSERVER_VERSION).tar.gz GESFTPSERVER_SITE = http://www.greenend.org.uk/rjk/sftpserver GESFTPSERVER_LICENSE = GPL-2.0+ @@ -25,7 +25,7 @@ GESFTPSERVER_DEPENDENCIES += \ # Python on the host is only used for tests, which we don't use in # Buildroot -GESFTPSERVER_CONF_ENV += rjk_cv_python24=false +GESFTPSERVER_CONF_ENV += rjk_cv_python3=false # openssh/dropbear looks here define GESFTPSERVER_ADD_SYMLINK From peter at korsgaard.com Fri Oct 14 13:51:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 15:51:27 +0200 Subject: [Buildroot] [git commit] package/gnutls: bump to version 3.7.8 Message-ID: <20221014135307.045F786CA8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2acba99893cbe76926229f00e333b444a5570c6d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Fri Oct 14 14:07:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/sdl2: bump version to 2.24.1 In-Reply-To: <20221010075624.8662-1-mf@go-sys.de> (Michael Fischer's message of "Mon, 10 Oct 2022 09:56:24 +0200") References: <20221010075624.8662-1-mf@go-sys.de> Message-ID: <87zgdylcrc.fsf@dell.be.48ers.dk> >>>>> "Michael" == Michael Fischer writes: > Signed-off-by: Michael Fischer Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:07:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:42 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: bump to version 1.30 In-Reply-To: <20221010084944.685684-2-james.hilliard1@gmail.com> (James Hilliard's message of "Mon, 10 Oct 2022 02:49:44 -0600") References: <20221010084944.685684-1-james.hilliard1@gmail.com> <20221010084944.685684-2-james.hilliard1@gmail.com> Message-ID: <87r0zalcr5.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Drop patch which is now upstream. > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:07:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:39 +0200 Subject: [Buildroot] [PATCH 1/2] package/ell: bump to version 0.53 In-Reply-To: <20221010084944.685684-1-james.hilliard1@gmail.com> (James Hilliard's message of "Mon, 10 Oct 2022 02:49:43 -0600") References: <20221010084944.685684-1-james.hilliard1@gmail.com> Message-ID: <87v8omlcr8.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:08:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:32 +0200 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 In-Reply-To: <20221012204246.904703-1-leo@yuriev.ru> (=?utf-8?B?ItCb0LU=?= =?utf-8?B?0L7QvdC40LQg0K7RgNGM0LXQsg==?= (Leonid Yuriev)"'s message of "Wed, 12 Oct 2022 23:42:46 +0300") References: <20221012204246.904703-1-leo@yuriev.ru> Message-ID: <87mt9ylcpr.fsf@dell.be.48ers.dk> >>>>> "??????" == ?????? ????? (Leonid Yuriev) writes: > This is stable bugfix release of libmdbx. So it is reasonable to backport > this patch to all applicable releases/branches of Buildroot. > Release notes for v0.11.12 > -------------------------- > Fixes: > - Fixed static assertion failure on platforms where the `off_t` type is wider > than corresponding fields of `struct flock` used for file locking (backport). > Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. > - Fixed assertion check inside `page_retire_ex()` (backport). > Minors: > - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). > - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). > The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md > Signed-off-by: ?????? ????? (Leonid Yuriev) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:08:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:57 +0200 Subject: [Buildroot] [PATCH] package/libnss: bump version to 3.84 In-Reply-To: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Thu, 13 Oct 2022 19:24:33 +0200") References: <20221013172433.100738-1-giulio.benetti@benettiengineering.com> Message-ID: <87ilkmlcp2.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > Signed-off-by: Giulio Benetti Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:06:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:16 +0200 Subject: [Buildroot] [git commit] package/sdl2: bump version to 2.24.1 Message-ID: <20221014140932.F086D86CE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17a0980bc50c3bc3daec00cf57b7c00e2a71a60a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Fischer Signed-off-by: Peter Korsgaard --- package/sdl2/sdl2.hash | 4 ++-- package/sdl2/sdl2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sdl2/sdl2.hash b/package/sdl2/sdl2.hash index 981c98531e..782c552c52 100644 --- a/package/sdl2/sdl2.hash +++ b/package/sdl2/sdl2.hash @@ -1,4 +1,4 @@ -# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.0.tar.gz.sig -sha256 91e4c34b1768f92d399b078e171448c6af18cafda743987ed2064a28954d6d97 SDL2-2.24.0.tar.gz +# Locally calculated after checking http://www.libsdl.org/release/SDL2-2.24.1.tar.gz.sig +sha256 bc121588b1105065598ce38078026a414c28ea95e66ed2adab4c44d80b309e1b SDL2-2.24.1.tar.gz # Locally calculated sha256 fcb07e07ac6bc8b2fcf047b50431ef4ebe5b619d7ca7c82212018309a9067426 LICENSE.txt diff --git a/package/sdl2/sdl2.mk b/package/sdl2/sdl2.mk index 4585c33c9b..28e2c5cb36 100644 --- a/package/sdl2/sdl2.mk +++ b/package/sdl2/sdl2.mk @@ -4,7 +4,7 @@ # ################################################################################ -SDL2_VERSION = 2.24.0 +SDL2_VERSION = 2.24.1 SDL2_SOURCE = SDL2-$(SDL2_VERSION).tar.gz SDL2_SITE = http://www.libsdl.org/release SDL2_LICENSE = Zlib From peter at korsgaard.com Fri Oct 14 14:08:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:08:51 +0200 Subject: [Buildroot] [git commit] package/libnss: bump version to 3.84 Message-ID: <20221014140933.29ABD86CE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bcdf2fc0e41832147d3fc398070074be29c159d4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Peter Korsgaard --- package/libnss/libnss.hash | 4 ++-- package/libnss/libnss.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnss/libnss.hash b/package/libnss/libnss.hash index 026344668f..2b34cc1a77 100644 --- a/package/libnss/libnss.hash +++ b/package/libnss/libnss.hash @@ -1,4 +1,4 @@ -# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_83_RTM/src/SHA256SUMS -sha256 ab23ea67f964090b8b73c80a674082571c36e5f4eba92057ac648c9c1def0128 nss-3.83.tar.gz +# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_84_RTM/src/SHA256SUMS +sha256 9a387ffe350ff14f001d943f96cc0c064891551d71e1a97a5ddbffe7f1207a25 nss-3.84.tar.gz # Locally calculated sha256 a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4 nss/COPYING diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 88097c8db5..415ca900df 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNSS_VERSION = 3.83 +LIBNSS_VERSION = 3.84 LIBNSS_SOURCE = nss-$(LIBNSS_VERSION).tar.gz LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(subst .,_,$(LIBNSS_VERSION))_RTM/src LIBNSS_DISTDIR = dist From peter at korsgaard.com Fri Oct 14 14:06:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:50 +0200 Subject: [Buildroot] [git commit] package/iwd: bump to version 1.30 Message-ID: <20221014140933.1031186CED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b790f6e494e65b4704c1e6c5cd38c38fc0bd7719 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which is now upstream. Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- .../0001-src-storage.c-fix-build-with-uclibc.patch | 37 ---------------------- package/iwd/iwd.hash | 2 +- package/iwd/iwd.mk | 2 +- 3 files changed, 2 insertions(+), 39 deletions(-) diff --git a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch b/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch deleted file mode 100644 index 55fdaa86fd..0000000000 --- a/package/iwd/0001-src-storage.c-fix-build-with-uclibc.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 99e74ade2ea892e6d0b070bec1df6a135ce2c8b3 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Mar 2022 16:35:49 +0100 -Subject: [PATCH] src/storage.c: fix build with uclibc - -explicit_bzero is used in src/storage.c since commit -01cd8587606bf2da1af245163150589834126c1c but src/missing.h is not -included, as a result build with uclibc fails on: - -/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init': -storage.c:(.text+0x13a4): undefined reference to `explicit_bzero' - -Fixes: - - http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1 - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://lists.01.org/hyperkitty/list/iwd at lists.01.org/thread/WB2XXRBUDHC5IVFDEOJBK23JHPURL427] ---- - src/storage.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/storage.c b/src/storage.c -index 82a72443..aa8066b1 100644 ---- a/src/storage.c -+++ b/src/storage.c -@@ -44,6 +44,7 @@ - #include - #include "ell/useful.h" - -+#include "src/missing.h" - #include "src/common.h" - #include "src/storage.h" - #include "src/crypto.h" --- -2.35.1 - diff --git a/package/iwd/iwd.hash b/package/iwd/iwd.hash index 1c34aa0a90..e7971cd637 100644 --- a/package/iwd/iwd.hash +++ b/package/iwd/iwd.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/network/wireless/sha256sums.asc -sha256 3f138e03301beb2afc7b385a62f56db17059137857ab579f269c4e441783e760 iwd-1.25.tar.xz +sha256 9fd13512dc27d83efb8d341f7df98f5488f70131686021fcd0d93fc97af013b8 iwd-1.30.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..4a818f0b82 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -4,7 +4,7 @@ # ################################################################################ -IWD_VERSION = 1.25 +IWD_VERSION = 1.30 IWD_SOURCE = iwd-$(IWD_VERSION).tar.xz IWD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/wireless IWD_LICENSE = LGPL-2.1+ From peter at korsgaard.com Fri Oct 14 14:07:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:07:06 +0200 Subject: [Buildroot] [git commit] package/libmdbx: bump version to 0.11.12 Message-ID: <20221014140933.1E33C86CEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=dd2ded3355c01f333c18dc16e7d9a3c496007960 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Fri Oct 14 14:06:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:06:40 +0200 Subject: [Buildroot] [git commit] package/ell: bump to version 0.53 Message-ID: <20221014140933.0635386CA6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=63ee0e8b35e556e34e724b74b951e80d3f571f3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/ell/ell.hash | 2 +- package/ell/ell.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ell/ell.hash b/package/ell/ell.hash index 9affa390b8..68832c3201 100644 --- a/package/ell/ell.hash +++ b/package/ell/ell.hash @@ -1,5 +1,5 @@ # From https://mirrors.edge.kernel.org/pub/linux/libs/ell/sha256sums.asc -sha256 a7ff8ecbc76b187d942dd22b61cb489711400897c790319ffb7e944791687c3f ell-0.49.tar.xz +sha256 a7d0df846af839bbea1b80f292166371070328854b3fa785b5c607fe600552ad ell-0.53.tar.xz # License files sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING diff --git a/package/ell/ell.mk b/package/ell/ell.mk index 9735865eae..b27d6feb65 100644 --- a/package/ell/ell.mk +++ b/package/ell/ell.mk @@ -4,7 +4,7 @@ # ################################################################################ -ELL_VERSION = 0.49 +ELL_VERSION = 0.53 ELL_SOURCE = ell-$(ELL_VERSION).tar.xz ELL_SITE = $(BR2_KERNEL_MIRROR)/linux/libs/ell ELL_LICENSE = LGPL-2.1+ From peter at korsgaard.com Fri Oct 14 14:09:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:09:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 In-Reply-To: <20221001212114.11912-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:21:14 +0200") References: <20221001212114.11912-1-fontaine.fabrice@gmail.com> Message-ID: <87edvalcnh.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) > - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) > - Fix serve-stale crash that could happen when > stale-answer-client-timeout was set to 0 and there was a stale CNAME > in the cache for an incoming query. (CVE-2022-3080) > - Prevent excessive resource use while processing large delegations. > (CVE-2022-2795) > https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:10:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:18 +0200 Subject: [Buildroot] [PATCH 1/1] package/xz: bump to version 5.2.7 In-Reply-To: <20221001212938.25577-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:29:37 +0200") References: <20221001212938.25577-1-fontaine.fabrice@gmail.com> Message-ID: <87a65ylcmt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:11:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:11:40 +0200 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 In-Reply-To: <20221002004931.1805825-1-judge.packham@gmail.com> (Chris Packham's message of "Sun, 2 Oct 2022 13:49:30 +1300") References: <20221002004931.1805825-1-judge.packham@gmail.com> Message-ID: <875ygmlckj.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > This is a bug fix release. The changes are: > - extmod/machine_i2c: only use WRITE1 option if transfer supports it > This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it > writes the address to read from. > Signed-off-by: Chris Packham Committed, thanks. Does this mean that it also needs to be backported to 2022.08.x? If this is an esp32-only issue then presumably not? -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:12:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:12:36 +0200 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221002004931.1805825-2-judge.packham@gmail.com> (Chris Packham's message of "Sun, 2 Oct 2022 13:49:31 +1300") References: <20221002004931.1805825-1-judge.packham@gmail.com> <20221002004931.1805825-2-judge.packham@gmail.com> Message-ID: <871qralciz.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > Add new version. Remove patch that has been applied upstream. Update > hash for COPYING as it's text has changed to clarify some details but > the license remains LGP-2.0+L/GPL-2.0+. > Signed-off-by: Chris Packham > --- > ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- > package/syslog-ng/syslog-ng.hash | 4 +- > package/syslog-ng/syslog-ng.mk | 2 +- Don't you need to update the version in syslog-ng.conf as well? -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:09:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:09:43 +0200 Subject: [Buildroot] [git commit] package/bind: security bump to version 9.16.33 Message-ID: <20221014141258.1A5BB86D0A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index e5bf2be318..2f83a6276e 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Fri Oct 14 14:10:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:12 +0200 Subject: [Buildroot] [git commit] package/xz: bump to version 5.2.7 Message-ID: <20221014141258.2397186D0B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3ac7d91c874ae9212ae8aee400a194356e301169 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;h=0205423e79ce8297102096b0fc8b030ddf5b2023;hb=d24a57b7fc7e5e9267b84367cb0788d3acf7f569 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/xz/xz.hash | 3 +-- package/xz/xz.mk | 6 +----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/package/xz/xz.hash b/package/xz/xz.hash index 9577e98e80..3aa68791fd 100644 --- a/package/xz/xz.hash +++ b/package/xz/xz.hash @@ -1,6 +1,5 @@ # Locally calculated after checking pgp signature -sha256 5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df xz-5.2.5.tar.bz2 -sha256 98c6cb1042284fe704ec30083f3fc87364ce9ed2ea51f62bbb0ee9d3448717ec xzgrep-ZDI-CAN-16587.patch +sha256 b65f1d0c2708e57716f4dd2216989a73847ac6fdb4168ffceb155767e22b834b xz-5.2.7.tar.bz2 # Hash for license files sha256 bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c COPYING diff --git a/package/xz/xz.mk b/package/xz/xz.mk index cdb01e06a9..004eea94b2 100644 --- a/package/xz/xz.mk +++ b/package/xz/xz.mk @@ -4,7 +4,7 @@ # ################################################################################ -XZ_VERSION = 5.2.5 +XZ_VERSION = 5.2.7 XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2 XZ_SITE = https://tukaani.org/xz XZ_INSTALL_STAGING = YES @@ -13,10 +13,6 @@ XZ_LICENSE = Public Domain, GPL-2.0+, GPL-3.0+, LGPL-2.1+ XZ_LICENSE_FILES = COPYING COPYING.GPLv2 COPYING.GPLv3 COPYING.LGPLv2.1 XZ_CPE_ID_VENDOR = tukaani -XZ_PATCH = xzgrep-ZDI-CAN-16587.patch -# xzgrep-ZDI-CAN-16587.patch -XZ_IGNORE_CVES += CVE-2022-1271 - ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) XZ_CONF_OPTS += --enable-threads else From peter at korsgaard.com Fri Oct 14 14:10:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:10:54 +0200 Subject: [Buildroot] [git commit] package/micropython: Bug fix release 1.19.1 Message-ID: <20221014141258.2D42286D0D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=199f8fe65623cf5d547505c12edfb88d518f40a9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a bug fix release. The changes are: - extmod/machine_i2c: only use WRITE1 option if transfer supports it This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it writes the address to read from. Signed-off-by: Chris Packham Signed-off-by: Peter Korsgaard --- package/micropython/micropython.hash | 2 +- package/micropython/micropython.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/micropython/micropython.hash b/package/micropython/micropython.hash index 09bc574ebc..7bff7de4e2 100644 --- a/package/micropython/micropython.hash +++ b/package/micropython/micropython.hash @@ -1,3 +1,3 @@ #locally computed -sha256 128b6fb13b518b4d3e75b4f0c04f175dc336c762d8c6360f647e91dc4d25e5d0 micropython-1.19.tar.gz +sha256 c980ad7e742491df0dc10db2958137dbbf9aa7a8009e102fc75f4c0cac2d6b5e micropython-1.19.1.tar.gz sha256 0f678c2abd7fe2cfca36693630506bbcbdfc219bd04bf4a02fe3b094ae4c666f LICENSE diff --git a/package/micropython/micropython.mk b/package/micropython/micropython.mk index f7af9bfc32..51b45e5e99 100644 --- a/package/micropython/micropython.mk +++ b/package/micropython/micropython.mk @@ -4,7 +4,7 @@ # ################################################################################ -MICROPYTHON_VERSION = 1.19 +MICROPYTHON_VERSION = 1.19.1 MICROPYTHON_SITE = $(call github,micropython,micropython,v$(MICROPYTHON_VERSION)) # Micropython has a lot of code copied from other projects, and also a number # of submodules for various libs. However, we don't even clone the submodules, From peter at korsgaard.com Fri Oct 14 14:44:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:44:03 +0200 Subject: [Buildroot] [PATCH 1/1] package/unbound: bump version to 1.17.0 In-Reply-To: <20221013164244.150039-1-kyle@balena.io> (Kyle Harding via buildroot's message of "Thu, 13 Oct 2022 12:42:44 -0400") References: <20221013164244.150039-1-kyle@balena.io> Message-ID: <87wn92jwi4.fsf@dell.be.48ers.dk> >>>>> "Kyle" == Kyle Harding via buildroot writes: > Signed-off-by: Kyle Harding Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 14 14:43:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 16:43:37 +0200 Subject: [Buildroot] [git commit] package/unbound: bump version to 1.17.0 Message-ID: <20221014144442.1FBFE86D16@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eeeaa801f38e20b421b798c8e937e79cbd1d7cfa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Kyle Harding Signed-off-by: Peter Korsgaard --- package/unbound/unbound.hash | 4 ++-- package/unbound/unbound.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/unbound/unbound.hash b/package/unbound/unbound.hash index cef8edc4a2..147ac7b13a 100644 --- a/package/unbound/unbound.hash +++ b/package/unbound/unbound.hash @@ -1,5 +1,5 @@ -# From https://nlnetlabs.nl/downloads/unbound/unbound-1.16.3.tar.gz.sha256 -sha256 ea0c6665e2c3325b769eac1dfccd60fe1828d5fcf662650039eccb3f67edb28e unbound-1.16.3.tar.gz +# From https://nlnetlabs.nl/downloads/unbound/unbound-1.17.0.tar.gz.sha256 +sha256 dcbc95d7891d9f910c66e4edc9f1f2fde4dea2eec18e3af9f75aed44a02f1341 unbound-1.17.0.tar.gz # Locally calculated sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSE diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index 73a460d103..d86d9c2067 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -4,7 +4,7 @@ # ################################################################################ -UNBOUND_VERSION = 1.16.3 +UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause From james.hilliard1 at gmail.com Fri Oct 14 15:06:51 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 09:06:51 -0600 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package Message-ID: <20221014150651.2527997-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/rtl8192eu/Config.in create mode 100644 package/rtl8192eu/rtl8192eu.hash create mode 100644 package/rtl8192eu/rtl8192eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..0a3ecee2eb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1404,6 +1404,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..e2ea999d60 100644 --- a/package/Config.in +++ b/package/Config.in @@ -576,6 +576,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..167864c35d --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 b2b363b8dc27c658cbfd5be32a65d0876cfd7c723ac6f72fdefeb6e44a9b1c9e rtl8192eu-7b17d51543859e23d845d473806347db3415e8e4.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..cb612a4c15 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 7b17d51543859e23d845d473806347db3415e8e4 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) -- 2.34.1 From peter at korsgaard.com Fri Oct 14 15:10:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 14 Oct 2022 17:10:27 +0200 Subject: [Buildroot] [PATCH] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221014151028.3843939-1-peter@korsgaard.com> Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 15 +++++++-------- package/linux-headers/Config.in.host | 16 ++++++++-------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index f9caa3c652..ee59761f33 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 07963f185e..e1fd0feb44 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,15 +1,14 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 7aee67de56..8679241a2c 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -392,14 +392,14 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.19.13" if BR2_KERNEL_HEADERS_5_19 - default "6.0" if BR2_KERNEL_HEADERS_6_0 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 + default "5.19.15" if BR2_KERNEL_HEADERS_5_19 + default "6.0.1" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ -- 2.30.2 From mmayer at broadcom.com Fri Oct 14 17:20:12 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 10:20:12 -0700 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" Message-ID: <20221014172013.758628-1-mmayer@broadcom.com> Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer --- package/mmc-utils/Config.in | 8 ++++++++ package/mmc-utils/mmc-utils.mk | 10 +++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac44571..0283658a7a57 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + depends on BR2_PACKAGE_MMC_UTILS + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c84737869264..14e2bee58736 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(MMC_UTILS_CFLAGS)" \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS -- 2.34.1 From mmayer at broadcom.com Fri Oct 14 17:20:37 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 10:20:37 -0700 Subject: [Buildroot] [PATCH] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014005055.746362-1-mmayer@broadcom.com> References: <20221014005055.746362-1-mmayer@broadcom.com> Message-ID: On Thu, 13 Oct 2022 at 17:51, Markus Mayer wrote: > # override AM_CFLAGS as the project Makefile uses it to pass > # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts > # with the _FORTIFY_SOURCE that we pass when hardening options are > # enabled. > define MMC_UTILS_BUILD_CMDS > - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= > + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) CFLAGS=$(MMC_UTILS_CFLAGS) \ > + AM_CFLAGS= > endef Sorry, there are some quotes missing. v2 submitted. Regards, -Markus From yann.morin.1998 at free.fr Fri Oct 14 19:16:35 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:16:35 +0200 Subject: [Buildroot] [git commit] mmc-utils: allow enabling of dangerous commands Message-ID: <20221014191709.3132A86D23@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4c7f1a439ad44c8c7bd56a9e550fc059a14aeaa6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Provide a config option that allows the user to enable mmc's "dangerous commands" if so desired. mmc-utils considers turning on permanent write protection on a device a "dangerous command" and doesn't offer it by default. Signed-off-by: Markus Mayer [yann.morin.1998 at free.fr: - use if-endif block - move closer to main option for proper indentation ] Signed-off-by: Yann E. MORIN --- package/mmc-utils/Config.in | 11 +++++++++++ package/mmc-utils/mmc-utils.mk | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in index 850aeac445..953afec588 100644 --- a/package/mmc-utils/Config.in +++ b/package/mmc-utils/Config.in @@ -6,5 +6,16 @@ config BR2_PACKAGE_MMC_UTILS https://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git +if BR2_PACKAGE_MMC_UTILS + +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS + bool "Enable dangerous commands" + help + Enable support for dangerous commands in mmc-utils. mmc-utils + considers turning on permanent write protection on a device a + "dangerous command" and doesn't offer it by default. + +endif + comment "mmc-utils needs a toolchain w/ headers >= 3.0" depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk index c847378692..14e2bee587 100644 --- a/package/mmc-utils/mmc-utils.mk +++ b/package/mmc-utils/mmc-utils.mk @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git MMC_UTILS_LICENSE = GPL-2.0 MMC_UTILS_LICENSE_FILES = mmc.h +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) + +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED +endif + # override AM_CFLAGS as the project Makefile uses it to pass # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts # with the _FORTIFY_SOURCE that we pass when hardening options are # enabled. define MMC_UTILS_BUILD_CMDS - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(MMC_UTILS_CFLAGS)" \ + AM_CFLAGS= endef define MMC_UTILS_INSTALL_TARGET_CMDS From yann.morin.1998 at free.fr Fri Oct 14 19:18:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:18:46 +0200 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014172013.758628-1-mmayer@broadcom.com> References: <20221014172013.758628-1-mmayer@broadcom.com> Message-ID: <20221014191846.GC2503@scaer> Markus, All, On 2022-10-14 10:20 -0700, Markus Mayer via buildroot spake thusly: > Provide a config option that allows the user to enable mmc's "dangerous > commands" if so desired. mmc-utils considers turning on permanent write > protection on a device a "dangerous command" and doesn't offer it by > default. > > Signed-off-by: Markus Mayer > --- > package/mmc-utils/Config.in | 8 ++++++++ > package/mmc-utils/mmc-utils.mk | 10 +++++++++- > 2 files changed, 17 insertions(+), 1 deletion(-) > > diff --git a/package/mmc-utils/Config.in b/package/mmc-utils/Config.in > index 850aeac44571..0283658a7a57 100644 > --- a/package/mmc-utils/Config.in > +++ b/package/mmc-utils/Config.in > @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS > > comment "mmc-utils needs a toolchain w/ headers >= 3.0" > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > + > +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS > + bool "Enable dangerous commands" > + depends on BR2_PACKAGE_MMC_UTILS > + help > + Enable support for dangerous commands in mmc-utils. mmc-utils > + considers turning on permanent write protection on a device a > + "dangerous command" and doesn't offer it by default. Sub-options must immediately follow the main option, or the indentation is not correct. We also prefer if-endif blocks when introducing new sub-options, for consistency across the code base. Applied to master with the above two changes, thanks. Regards, Yann E. MORIN. > diff --git a/package/mmc-utils/mmc-utils.mk b/package/mmc-utils/mmc-utils.mk > index c84737869264..14e2bee58736 100644 > --- a/package/mmc-utils/mmc-utils.mk > +++ b/package/mmc-utils/mmc-utils.mk > @@ -10,12 +10,20 @@ MMC_UTILS_SITE_METHOD = git > MMC_UTILS_LICENSE = GPL-2.0 > MMC_UTILS_LICENSE_FILES = mmc.h > > +MMC_UTILS_CFLAGS = $(TARGET_CFLAGS) > + > +ifeq ($(BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS),y) > +MMC_UTILS_CFLAGS += -DDANGEROUS_COMMANDS_ENABLED > +endif > + > # override AM_CFLAGS as the project Makefile uses it to pass > # -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2, and the latter conflicts > # with the _FORTIFY_SOURCE that we pass when hardening options are > # enabled. > define MMC_UTILS_BUILD_CMDS > - $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) AM_CFLAGS= > + $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS) \ > + CFLAGS="$(MMC_UTILS_CFLAGS)" \ > + AM_CFLAGS= > endef > > define MMC_UTILS_INSTALL_TARGET_CMDS > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 19:30:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:30:21 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation In-Reply-To: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> References: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> Message-ID: <20221014193021.GD2503@scaer> Andreas, All, On 2022-10-14 11:10 +0200, feedback--- via buildroot spake thusly: > Hi all, > > we are not sure if this is even a bug, but BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via 'menuconfig' without setting a > string for the bool value. Thanks for the suggestion. That was on purpose that this was not selectable, see the commit log that introduced the option, 20dd9453f32c (package/dhcpcd: add BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP), which referred to: https://patchwork.ozlabs.org/project/buildroot/patch/20210303091904.467706-1-fontaine.fabrice at gmail.com which basically said (paraphrasing): For such complex conditions, it is easier to introduce a Kconfig symbol, rather than write complex Makefile code in the .mk file. Indeed, before 20dd9453f32c, there were quite a few repetitive code blocks to handle each of them, see commit d412539dbca2 (package/dhcpcd: disable privsep on older kernels). Can you explain why you'd want to explicitly disable privilege separation in dhcpcd? > --- a/package/dhcpcd/Config.in > +++ b/package/dhcpcd/Config.in > @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD > ?if BR2_PACKAGE_DHCPCD > ? > ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP > -?????? bool > +?????? bool "enable privilege separation" > ??????? default y > ??????? depends on BR2_USE_MMU > ??????? # Audit headers were only added in recent kernels for some arches > > Best regards, > Andreas > Please, avoid html mail; our patchwork did not even catch it: https://patchwork.ozlabs.org/project/buildroot/list/ Next time, please use "git send-email", which sends patches in a format ready to be digested to be applied easily. Regards, Yann E. MORIN. > > > > > Hi all,
      >
      > we are not sure if this is even a bug, but > BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via > 'menuconfig' without setting a string for the bool value.
      >
      > --- a/package/dhcpcd/Config.in
      > +++ b/package/dhcpcd/Config.in
      > @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD
      > ?if BR2_PACKAGE_DHCPCD
      > ?
      > ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP
      > -?????? bool
      > +?????? bool "enable privilege separation"
      > ??????? default y
      > ??????? depends on BR2_USE_MMU
      > ??????? # Audit headers were only added in recent kernels for some > arches
      >
      > Best regards,
      > Andreas
      >
      >       > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 19:33:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 21:33:21 +0200 Subject: [Buildroot] [PATCH 2/4] package/nodejs: bump to v16.17.1 In-Reply-To: <87tu49o3ay.fsf@dell.be.48ers.dk> References: <20220925171932.1630739-1-thomas.petazzoni@bootlin.com> <20220925171932.1630739-2-thomas.petazzoni@bootlin.com> <8735bup3qe.fsf@dell.be.48ers.dk> <87tu49o3ay.fsf@dell.be.48ers.dk> Message-ID: <20221014193321.GE2503@scaer> Peter, All, On 2022-10-12 10:26 +0200, Peter Korsgaard spake thusly: > >>>>> "Peter" == Peter Korsgaard writes: > >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > >> This is currently the latest version in the v16.x branch. > > Committed to 2022.08.x, thanks. > I forgot to mention that this should have been marked as a security bump > given the security fixes it contains: Hrm... Aren't all nodejs version bumps security fixes? ;-] Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From mmayer at broadcom.com Fri Oct 14 19:54:43 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Fri, 14 Oct 2022 12:54:43 -0700 Subject: [Buildroot] [PATCH v2] mmc-utils: allow enabling of "dangerous commands" In-Reply-To: <20221014191846.GC2503@scaer> References: <20221014172013.758628-1-mmayer@broadcom.com> <20221014191846.GC2503@scaer> Message-ID: On Fri, 14 Oct 2022 at 12:18, Yann E. MORIN wrote: > > @@ -8,3 +8,11 @@ config BR2_PACKAGE_MMC_UTILS > > > > comment "mmc-utils needs a toolchain w/ headers >= 3.0" > > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 > > + > > +config BR2_PACKAGE_MMC_UTILS_ENABLE_DANGEROUS_COMMANDS > > + bool "Enable dangerous commands" > > + depends on BR2_PACKAGE_MMC_UTILS > > + help > > + Enable support for dangerous commands in mmc-utils. mmc-utils > > + considers turning on permanent write protection on a device a > > + "dangerous command" and doesn't offer it by default. > > Sub-options must immediately follow the main option, or the indentation > is not correct. > > We also prefer if-endif blocks when introducing new sub-options, for > consistency across the code base. Gotcha. > Applied to master with the above two changes, thanks. Thanks for the fixup. Regards, -Markus From yann.morin.1998 at free.fr Fri Oct 14 20:06:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:06:38 +0200 Subject: [Buildroot] [git commit] package/iwd: no autoreconfigure Message-ID: <20221014200810.8465186D2E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1db79dffcae63dbed021143203f1908f3f7db33f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 4a818f0b82..297e1fabe9 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From yann.morin.1998 at free.fr Fri Oct 14 20:08:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:08:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure In-Reply-To: References: Message-ID: <20221014200848.GF2503@scaer> Daniel, All, On 2022-10-13 15:03 +0000, Lang Daniel via buildroot spake thusly: > configure.ac is no longer patched, autoreconfigure isn't needed. I've reworded to reference ff0d53405157, when we dropped the configure.ac patch. > Signed-off-by: Daniel Lang Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/iwd/iwd.mk | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 8497fd1141..fe79704641 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING > IWD_CPE_ID_VENDOR = intel > IWD_CPE_ID_PRODUCT = inet_wireless_daemon > IWD_SELINUX_MODULES = networkmanager > -# We're patching configure.ac > -IWD_AUTORECONF = YES > > IWD_CONF_OPTS = \ > --disable-manual-pages \ > -- > 2.25.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 14 20:09:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 14:09:18 -0600 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package Message-ID: <20221014200918.2816609-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- Changes v1 -> v2: - update to latest 5.11.2.1 version fixing issues on latest kernel --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/rtl8192eu/Config.in create mode 100644 package/rtl8192eu/rtl8192eu.hash create mode 100644 package/rtl8192eu/rtl8192eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..0a3ecee2eb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1404,6 +1404,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..e2ea999d60 100644 --- a/package/Config.in +++ b/package/Config.in @@ -576,6 +576,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..f616def194 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 75b523ff1cda54d7cd8734a043b2d145231ab81fcc13d3edcd80e00d59201409 rtl8192eu-1e15b6d451731bc4d3ffd587194dc4bd0f286ac0.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..0e8ffea5cb --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 1e15b6d451731bc4d3ffd587194dc4bd0f286ac0 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) -- 2.34.1 From yann.morin.1998 at free.fr Fri Oct 14 20:10:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:10:50 +0200 Subject: [Buildroot] [PATCH 1/2] package/iwd: drop dbus check In-Reply-To: References: Message-ID: <20221014201050.GG2503@scaer> Daniel, All, On 2022-10-13 15:01 +0000, Lang Daniel via buildroot spake thusly: > Since 6f5f6bcd8 dbus is selected when iwd is selected. > > Signed-off-by: Daniel Lang > --- > package/iwd/iwd.mk | 13 ++++--------- > 1 file changed, 4 insertions(+), 9 deletions(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index fc10c5f1d4..8497fd1141 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -17,15 +17,10 @@ IWD_AUTORECONF = YES > > IWD_CONF_OPTS = \ > --disable-manual-pages \ > - --enable-external-ell > -IWD_DEPENDENCIES = ell > - > -ifeq ($(BR2_PACKAGE_DBUS),y) > -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share > -IWD_DEPENDENCIES += dbus > -else > -IWD_CONF_OPTS += --disable-dbus-policy > -endif > + --enable-external-ell \ > + --enable-dbus-policy \ > + --with-dbus-datadir=/usr/share > +IWD_DEPENDENCIES = ell dbus Why keep a build-time dependency on dbus, if it really is a runtime dependency as noted in Config.in ? Can you double-check that iwd does not end up linked to libdbus? Then, send an update: either drop the build dependency if it really is a runtiem one, or fix the Config.in comment if it is still needed at build time. Regards, Yann E. MORIN. > ifeq ($(BR2_PACKAGE_READLINE),y) > # iwd client depends on readline (GPL-3.0+) > -- > 2.25.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 14 20:18:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:18:40 +0200 Subject: [Buildroot] [git commit] package/glibc: fix make-4.4 compatibility Message-ID: <20221014202025.A4EE986D37@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b749d6dd7b5fc6cc8b85a316878721d42654759c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport a patch fixing compatibility with upcoming make 4.4. Fixes: - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...ix-MAKEFLAGS-assignment-for-upcoming-make.patch | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 100644 index 0000000000..0c82d7abbe --- /dev/null +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1,117 @@ +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 +From: Sergei Trofimovich +Date: Tue, 13 Sep 2022 13:39:13 -0400 +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 + [BZ# 29564] + +make-4.4 will add long flags to MAKEFLAGS variable: + + * WARNING: Backward-incompatibility! + Previously only simple (one-letter) options were added to the MAKEFLAGS + variable that was visible while parsing makefiles. Now, all options + are available in MAKEFLAGS. + +This causes locale builds to fail when long options are used: + + $ make --shuffle + ... + make -C localedata install-locales + make: invalid shuffle mode: '1662724426r' + +The change fixes it by passing eash option via whitespace and dashes. +That way option is appended to both single-word form and whitespace +separated form. + +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering +out --long-options. Otherwise options like --shuffle flag enable silent +mode unintentionally. $(silent-make) variable consolidates the checks. + +Resolves: BZ# 29564 + +CC: Paul Smith +CC: Siddhesh Poyarekar +Signed-off-by: Sergei Trofimovich +Reviewed-by: Siddhesh Poyarekar +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +2d7ed98add14f75041499ac189696c9bd3d757fe] +--- + Makeconfig | 18 +++++++++++++++++- + Makerules | 4 ++-- + elf/rtld-Rules | 2 +- + 3 files changed, 20 insertions(+), 4 deletions(-) + +diff --git a/Makeconfig b/Makeconfig +index f8164a0025..842f49eb58 100644 +--- a/Makeconfig ++++ b/Makeconfig +@@ -43,6 +43,22 @@ else + $(error objdir must be defined by the build-directory Makefile) + endif + ++# Did we request 'make -s' run? "yes" or "no". ++# Starting from make-4.4 MAKEFLAGS now contains long ++# options like '--shuffle'. To detect presence of 's' ++# we pick first word with short options. Long options ++# are guaranteed to come after whitespace. We use '-' ++# prefix to always have a word before long options ++# even if no short options were passed. ++# Typical MAKEFLAGS values to watch for: ++# "rs --shuffle=42" (silent) ++# " --shuffle" (not silent) ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) ++silent-make := no ++else ++silent-make := yes ++endif ++ + # Root of the sysdeps tree. + sysdep_dir := $(..)sysdeps + export sysdep_dir := $(sysdep_dir) +@@ -917,7 +933,7 @@ endif + # umpteen zillion filenames along with it (we use `...' instead) + # but we don't want this echoing done when the user has said + # he doesn't want to see commands echoed by using -s. +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s ++ifeq ($(silent-make),yes) # if -s + +cmdecho := echo >/dev/null + else # not -s + +cmdecho := echo +diff --git a/Makerules b/Makerules +index d1e139d03c..09c0cf8357 100644 +--- a/Makerules ++++ b/Makerules +@@ -794,7 +794,7 @@ endif + # Maximize efficiency by minimizing the number of rules. + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. + # Don't define any builtin rules. +-MAKEFLAGS := $(MAKEFLAGS)r ++MAKEFLAGS := $(MAKEFLAGS) -r + + # Generic rule for making directories. + %/: +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +diff --git a/elf/rtld-Rules b/elf/rtld-Rules +index ca00dd1fe2..3c5e273f2b 100644 +--- a/elf/rtld-Rules ++++ b/elf/rtld-Rules +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ + mv -f $@T $@ + + # Use the verbose option of ar and tar when not running silently. +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s ++ifeq ($(silent-make),no) # if not -s + verbose := v + else # -s + verbose := +-- +2.34.1 + From yann.morin.1998 at free.fr Fri Oct 14 20:26:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 14 Oct 2022 22:26:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility In-Reply-To: <20221010003515.796446-1-james.hilliard1@gmail.com> References: <20221010003515.796446-1-james.hilliard1@gmail.com> Message-ID: <20221014202611.GH2503@scaer> James, All, On 2022-10-09 18:35 -0600, James Hilliard spake thusly: > Backport a patch fixing compatibility with upcoming make 4.4. > > Fixes: > - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 > - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 > - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 > > Signed-off-by: James Hilliard Applied to master, thanks. I'm afraid we'll get more packages that will suffer from that, but it at least looks like our own Makefile is immune to it: QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) which seems to be the only place we act on MAKEFLAGS. Hmm Or maybe not, after all. Can we have somthing like: --some-option=some-string which can be written as: --some-option some-string in which case our code would hit the "some-string" and interpret it as silent... Regards, Yann E. MORIN. > --- > ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ > 1 file changed, 117 insertions(+) > create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > new file mode 100644 > index 0000000000..0c82d7abbe > --- /dev/null > +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > @@ -0,0 +1,117 @@ > +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 > +From: Sergei Trofimovich > +Date: Tue, 13 Sep 2022 13:39:13 -0400 > +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 > + [BZ# 29564] > + > +make-4.4 will add long flags to MAKEFLAGS variable: > + > + * WARNING: Backward-incompatibility! > + Previously only simple (one-letter) options were added to the MAKEFLAGS > + variable that was visible while parsing makefiles. Now, all options > + are available in MAKEFLAGS. > + > +This causes locale builds to fail when long options are used: > + > + $ make --shuffle > + ... > + make -C localedata install-locales > + make: invalid shuffle mode: '1662724426r' > + > +The change fixes it by passing eash option via whitespace and dashes. > +That way option is appended to both single-word form and whitespace > +separated form. > + > +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering > +out --long-options. Otherwise options like --shuffle flag enable silent > +mode unintentionally. $(silent-make) variable consolidates the checks. > + > +Resolves: BZ# 29564 > + > +CC: Paul Smith > +CC: Siddhesh Poyarekar > +Signed-off-by: Sergei Trofimovich > +Reviewed-by: Siddhesh Poyarekar > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +2d7ed98add14f75041499ac189696c9bd3d757fe] > +--- > + Makeconfig | 18 +++++++++++++++++- > + Makerules | 4 ++-- > + elf/rtld-Rules | 2 +- > + 3 files changed, 20 insertions(+), 4 deletions(-) > + > +diff --git a/Makeconfig b/Makeconfig > +index f8164a0025..842f49eb58 100644 > +--- a/Makeconfig > ++++ b/Makeconfig > +@@ -43,6 +43,22 @@ else > + $(error objdir must be defined by the build-directory Makefile) > + endif > + > ++# Did we request 'make -s' run? "yes" or "no". > ++# Starting from make-4.4 MAKEFLAGS now contains long > ++# options like '--shuffle'. To detect presence of 's' > ++# we pick first word with short options. Long options > ++# are guaranteed to come after whitespace. We use '-' > ++# prefix to always have a word before long options > ++# even if no short options were passed. > ++# Typical MAKEFLAGS values to watch for: > ++# "rs --shuffle=42" (silent) > ++# " --shuffle" (not silent) > ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) > ++silent-make := no > ++else > ++silent-make := yes > ++endif > ++ > + # Root of the sysdeps tree. > + sysdep_dir := $(..)sysdeps > + export sysdep_dir := $(sysdep_dir) > +@@ -917,7 +933,7 @@ endif > + # umpteen zillion filenames along with it (we use `...' instead) > + # but we don't want this echoing done when the user has said > + # he doesn't want to see commands echoed by using -s. > +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s > ++ifeq ($(silent-make),yes) # if -s > + +cmdecho := echo >/dev/null > + else # not -s > + +cmdecho := echo > +diff --git a/Makerules b/Makerules > +index d1e139d03c..09c0cf8357 100644 > +--- a/Makerules > ++++ b/Makerules > +@@ -794,7 +794,7 @@ endif > + # Maximize efficiency by minimizing the number of rules. > + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. > + # Don't define any builtin rules. > +-MAKEFLAGS := $(MAKEFLAGS)r > ++MAKEFLAGS := $(MAKEFLAGS) -r > + > + # Generic rule for making directories. > + %/: > +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r > + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) > + > + # Use the verbose option of ar and tar when not running silently. > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > ++ifeq ($(silent-make),no) # if not -s > + verbose := v > + else # -s > + verbose := > +diff --git a/elf/rtld-Rules b/elf/rtld-Rules > +index ca00dd1fe2..3c5e273f2b 100644 > +--- a/elf/rtld-Rules > ++++ b/elf/rtld-Rules > +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ > + mv -f $@T $@ > + > + # Use the verbose option of ar and tar when not running silently. > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > ++ifeq ($(silent-make),no) # if not -s > + verbose := v > + else # -s > + verbose := > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Fri Oct 14 21:07:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:07:03 +0200 Subject: [Buildroot] [git commit] package/agent-proxy: new package Message-ID: <20221014210818.985F186D4E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b69fe70c264fc2eda79b36a5d96e5cb1b900ad7b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Rufus Segar Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in.host | 1 + package/agent-proxy/Config.in.host | 11 +++++++++++ package/agent-proxy/agent-proxy.hash | 3 +++ package/agent-proxy/agent-proxy.mk | 20 ++++++++++++++++++++ 5 files changed, 38 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index bfde353c8a..c0e6f8bbef 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2569,6 +2569,9 @@ F: support/testing/tests/package/test_glxinfo.py F: support/testing/tests/package/test_openssh.py F: toolchain/ +N: Rufus Segar +F: package/agent-proxy/ + N: Ryan Wilkins F: package/biosdevname/ diff --git a/package/Config.in.host b/package/Config.in.host index 84517787cc..d6b9ee0e2d 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -2,6 +2,7 @@ menu "Host utilities" source "package/abootimg/Config.in.host" source "package/aespipe/Config.in.host" + source "package/agent-proxy/Config.in.host" source "package/android-tools/Config.in.host" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" diff --git a/package/agent-proxy/Config.in.host b/package/agent-proxy/Config.in.host new file mode 100644 index 0000000000..80328790ad --- /dev/null +++ b/package/agent-proxy/Config.in.host @@ -0,0 +1,11 @@ +config BR2_PACKAGE_HOST_AGENT_PROXY + bool "host agent-proxy" + help + This is a simple, small proxy which was intended for use + with kgdb, or gdbserver type connections where you want to + share a text console and a debug session. + + The idea is that you use the agent-proxy to connect to a + serial port directly or to a remote terminal server. + + git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash new file mode 100644 index 0000000000..bd0e814d20 --- /dev/null +++ b/package/agent-proxy/agent-proxy.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk new file mode 100644 index 0000000000..46108aef02 --- /dev/null +++ b/package/agent-proxy/agent-proxy.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# agent-proxy +# +################################################################################ + +AGENT_PROXY_VERSION = agent-proxy-1.97 +AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_LICENSE = GPL-2.0 +AGENT_PROXY_LICENSE_FILES = COPYING + +define HOST_AGENT_PROXY_BUILD_CMDS + $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) +endef + +define HOST_AGENT_PROXY_INSTALL_CMDS + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(HOST_DIR)/bin/agent-proxy +endef + +$(eval $(host-generic-package)) From thomas.petazzoni at bootlin.com Fri Oct 14 21:11:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:11:47 +0200 Subject: [Buildroot] [PATCH 1/1] package: add agent-proxy target and host packages In-Reply-To: <20220507161338.2125859-1-rhs@riseup.net> References: <20220507161338.2125859-1-rhs@riseup.net> Message-ID: <20221014231147.05459ac1@windsurf> Hello Rugus, On Sat, 7 May 2022 17:13:37 +0100 Rufus Segar wrote: > Signed-off-by: Rufus Segar Thanks a lot for your contribution. Believe it or not, but after some many months, I finally took the time to review and apply your patch. However, I did quite a few changes: - I kept only the host variant of the package. Indeed, my understanding is that agent-proxy is meant to be executed on the developer workstation to de-multiplex the kgdb traffic from the console traffic. Therefore it was not clear why a target variant was needed. Of course, if additional justification/explanation is given, the target variant can be re-added via a follow-up patch. - Addition of an entry in the DEVELOPERS file - Addition of a .hash file with the hash of the tarball and hash of the COPYING file. See below for some other comments. > +AGENT_PROXY_VERSION = agent-proxy-1.97 > +AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git > +AGENT_PROXY_LICENSE = GPL-2.0+ This was not correct: the license is GPL-2.0 only. > +AGENT_PROXY_LICENSE_FILES = COPYING > + > +define AGENT_PROXY_BUILD_CMDS > + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all > +endef > + > +define AGENT_PROXY_INSTALL_STAGING_CMDS > + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(STAGING_DIR)/usr/bin This had not effect since AGENT_PROXY_INSTALL_STAGING is not set to YES. But anyway, I dropped this since I dropped the target variant; > +endef > + > +define AGENT_PROXY_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(TARGET_DIR)/usr/bin > +endef > + > +define HOST_AGENT_PROXY_BUILD_CMDS > + $(HOST_CONFIGURE_OPTS) $(MAKE) -C $(@D) > +endef > + > +define HOST_AGENT_PROXY_INSTALL_CMDS > + $(HOST_CONFIGURE_OPTS) $(INSTALL) -D -m 0755 $(@D)/agent-proxy $(HOST_DIR)/bin $(HOST_CONFIGURE_OPTS) not needed here, and we want the full destination path as the last argument, i.e $(HOST_DIR)/bin/agent-proxy. Once again, thanks a lot for this contribution! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 14 21:14:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 14 Oct 2022 23:14:22 +0200 Subject: [Buildroot] [PATCH 1/1] package: add kdmx target and host packages In-Reply-To: <20220507161338.2125859-2-rhs@riseup.net> References: <20220507161338.2125859-1-rhs@riseup.net> <20220507161338.2125859-2-rhs@riseup.net> Message-ID: <20221014231422.652a2ef6@windsurf> Hello Rufus, On Sat, 7 May 2022 17:13:38 +0100 Rufus Segar wrote: > Signed-off-by: Rufus Segar > --- > package/Config.in | 1 + > package/Config.in.host | 1 + > package/kdmx/Config.in | 12 ++++++++++++ > package/kdmx/Config.in.host | 12 ++++++++++++ > package/kdmx/kdmx.mk | 33 +++++++++++++++++++++++++++++++++ > 5 files changed, 59 insertions(+) > create mode 100644 package/kdmx/Config.in > create mode 100644 package/kdmx/Config.in.host > create mode 100644 package/kdmx/kdmx.mk Thanks a lot for your proposal! I'm a bit confused by the difference between agent-proxy and kdmx. Could you clarify? Also, kdmx is part of the agent-proxy code-base. So instead of being a separate package in Buildroot, the existing agent-proxy package should be extended to allow the build/installation or either agent-proxy or kdmx, or both. Could you have a look into this? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From judge.packham at gmail.com Fri Oct 14 21:17:25 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sat, 15 Oct 2022 10:17:25 +1300 Subject: [Buildroot] [PATCH 1/2] package/micropython: Bug fix release 1.19.1 In-Reply-To: <875ygmlckj.fsf@dell.be.48ers.dk> References: <20221002004931.1805825-1-judge.packham@gmail.com> <875ygmlckj.fsf@dell.be.48ers.dk> Message-ID: On Sat, 15 Oct 2022, 3:11 AM Peter Korsgaard, wrote: > >>>>> "Chris" == Chris Packham writes: > > > This is a bug fix release. The changes are: > > - extmod/machine_i2c: only use WRITE1 option if transfer supports it > > > This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it > > writes the address to read from. > > > Signed-off-by: Chris Packham > > Committed, thanks. > > Does this mean that it also needs to be backported to 2022.08.x? If this > is an esp32-only issue then presumably not? > No I don't think it needs to be backported. > > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: From judge.packham at gmail.com Fri Oct 14 21:18:29 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sat, 15 Oct 2022 10:18:29 +1300 Subject: [Buildroot] [PATCH 2/2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <871qralciz.fsf@dell.be.48ers.dk> References: <20221002004931.1805825-1-judge.packham@gmail.com> <20221002004931.1805825-2-judge.packham@gmail.com> <871qralciz.fsf@dell.be.48ers.dk> Message-ID: On Sat, 15 Oct 2022, 3:12 AM Peter Korsgaard, wrote: > >>>>> "Chris" == Chris Packham writes: > > > Add new version. Remove patch that has been applied upstream. Update > > hash for COPYING as it's text has changed to clarify some details but > > the license remains LGP-2.0+L/GPL-2.0+. > > > Signed-off-by: Chris Packham > > --- > > ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- > > package/syslog-ng/syslog-ng.hash | 4 +- > > package/syslog-ng/syslog-ng.mk | 2 +- > > Don't you need to update the version in syslog-ng.conf as well? > Oh yes of course. I'll submit a v2 soon. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Fri Oct 14 22:04:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:04:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/agent-proxy: fix AGENT_PROXY_VERSION Message-ID: <20221014220417.7167-1-fontaine.fabrice@gmail.com> Make AGENT_PROXY_VERSION compliant with release-monitoring.org Signed-off-by: Fabrice Fontaine --- package/agent-proxy/agent-proxy.hash | 2 +- package/agent-proxy/agent-proxy.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash index bd0e814d20..685dd4fbaf 100644 --- a/package/agent-proxy/agent-proxy.hash +++ b/package/agent-proxy/agent-proxy.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 b1667b36074c10ebd6dd1f89eda75d5877bc8e06ecf2919f18e75a7a5a9de19b agent-proxy-1.97.tar.gz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk index 46108aef02..c8844ccbf1 100644 --- a/package/agent-proxy/agent-proxy.mk +++ b/package/agent-proxy/agent-proxy.mk @@ -4,8 +4,8 @@ # ################################################################################ -AGENT_PROXY_VERSION = agent-proxy-1.97 -AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_VERSION = 1.97 +AGENT_PROXY_SITE = https://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git/snapshot AGENT_PROXY_LICENSE = GPL-2.0 AGENT_PROXY_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 14 22:07:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:07:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 Message-ID: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 14 22:20:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 00:20:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 Message-ID: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 14 23:09:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 17:09:05 -0600 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring Message-ID: <20221014230905.3091021-1-james.hilliard1@gmail.com> Make recommends using this technique for identifying short options. >From make NEWS for upcoming version 4.4: Previously only simple (one-letter) options were added to the MAKEFLAGS variable that was visible while parsing makefiles. Now, all options are available in MAKEFLAGS. If you want to check MAKEFLAGS for a one-letter option, expanding "$(firstword -$(MAKEFLAGS))" is a reliable way to return the set of one-letter options which can be examined via findstring, etc. Signed-off-by: James Hilliard --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..2d31fd45fa 100644 --- a/Makefile +++ b/Makefile @@ -434,7 +434,7 @@ PACKAGES := PACKAGES_ALL := # silent mode requested? -QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) # Strip off the annoying quoting ARCH := $(call qstrip,$(BR2_ARCH)) -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 00:56:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 18:56:11 -0600 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 Message-ID: <20221015005611.4054933-1-james.hilliard1@gmail.com> Make 4.4 introduces a shuffle mode which randomizes prerequisites in order to better flush out issues with parallel builds, as this mode randomizes prerequisites even when using -j1 builds we must instead explicitely mark parallel incompatible builds using the .NOTPARALLEL special target which disables prerequisites randomization when running in shuffle mode. Signed-off-by: James Hilliard --- package/Makefile.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..2327849a1f 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -17,7 +17,7 @@ else PARALLEL_JOBS := $(BR2_JLEVEL) endif -MAKE1 := $(HOSTMAKE) -j1 +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: override MAKE = $(HOSTMAKE) \ $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 00:58:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 18:58:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build Message-ID: <20221015005813.4055238-1-james.hilliard1@gmail.com> The bearssl package is not compatible with parallel builds. Fixes: - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 Signed-off-by: James Hilliard --- package/bearssl/bearssl.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk index ff5f4e87b7..c2a5760af5 100644 --- a/package/bearssl/bearssl.mk +++ b/package/bearssl/bearssl.mk @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib endif define BEARSSL_BUILD_CMDS - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ $(BEARSSL_TARGETS) endef -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 01:16:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 14 Oct 2022 21:16:14 -0400 Subject: [Buildroot] [PATCH 1/1] package/glibc: fix make-4.4 compatibility In-Reply-To: <20221014202611.GH2503@scaer> References: <20221010003515.796446-1-james.hilliard1@gmail.com> <20221014202611.GH2503@scaer> Message-ID: On Fri, Oct 14, 2022 at 4:26 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-09 18:35 -0600, James Hilliard spake thusly: > > Backport a patch fixing compatibility with upcoming make 4.4. > > > > Fixes: > > - http://autobuild.buildroot.net/results/5a3/5a3f6414d75fbc8a272258bf3bdb6f4fe7e6da34 > > - http://autobuild.buildroot.net/results/481/481c4617813da031beddaf00b97440071f646809 > > - http://autobuild.buildroot.net/results/cf1/cf152e7a95bec3b6ebd0209dd716cbec56f9d477 > > > > Signed-off-by: James Hilliard > > Applied to master, thanks. > > I'm afraid we'll get more packages that will suffer from that, but it > at least looks like our own Makefile is immune to it: > > QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q) > > which seems to be the only place we act on MAKEFLAGS. > > Hmm Or maybe not, after all. Can we have somthing like: > > --some-option=some-string > which can be written as: > --some-option some-string > > in which case our code would hit the "some-string" and interpret it as > silent... This should fix any issues with QUIET: https://patchwork.ozlabs.org/project/buildroot/patch/20221014230905.3091021-1-james.hilliard1 at gmail.com/ Also MAKE1 is broken, this should fix it: https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > > --- > > ...KEFLAGS-assignment-for-upcoming-make.patch | 117 ++++++++++++++++++ > > 1 file changed, 117 insertions(+) > > create mode 100644 package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > > > diff --git a/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > new file mode 100644 > > index 0000000000..0c82d7abbe > > --- /dev/null > > +++ b/package/glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch > > @@ -0,0 +1,117 @@ > > +From 2d7ed98add14f75041499ac189696c9bd3d757fe Mon Sep 17 00:00:00 2001 > > +From: Sergei Trofimovich > > +Date: Tue, 13 Sep 2022 13:39:13 -0400 > > +Subject: [PATCH] Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 > > + [BZ# 29564] > > + > > +make-4.4 will add long flags to MAKEFLAGS variable: > > + > > + * WARNING: Backward-incompatibility! > > + Previously only simple (one-letter) options were added to the MAKEFLAGS > > + variable that was visible while parsing makefiles. Now, all options > > + are available in MAKEFLAGS. > > + > > +This causes locale builds to fail when long options are used: > > + > > + $ make --shuffle > > + ... > > + make -C localedata install-locales > > + make: invalid shuffle mode: '1662724426r' > > + > > +The change fixes it by passing eash option via whitespace and dashes. > > +That way option is appended to both single-word form and whitespace > > +separated form. > > + > > +While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering > > +out --long-options. Otherwise options like --shuffle flag enable silent > > +mode unintentionally. $(silent-make) variable consolidates the checks. > > + > > +Resolves: BZ# 29564 > > + > > +CC: Paul Smith > > +CC: Siddhesh Poyarekar > > +Signed-off-by: Sergei Trofimovich > > +Reviewed-by: Siddhesh Poyarekar > > +Signed-off-by: James Hilliard > > +[james.hilliard1 at gmail.com: backport from upstream commit > > +2d7ed98add14f75041499ac189696c9bd3d757fe] > > +--- > > + Makeconfig | 18 +++++++++++++++++- > > + Makerules | 4 ++-- > > + elf/rtld-Rules | 2 +- > > + 3 files changed, 20 insertions(+), 4 deletions(-) > > + > > +diff --git a/Makeconfig b/Makeconfig > > +index f8164a0025..842f49eb58 100644 > > +--- a/Makeconfig > > ++++ b/Makeconfig > > +@@ -43,6 +43,22 @@ else > > + $(error objdir must be defined by the build-directory Makefile) > > + endif > > + > > ++# Did we request 'make -s' run? "yes" or "no". > > ++# Starting from make-4.4 MAKEFLAGS now contains long > > ++# options like '--shuffle'. To detect presence of 's' > > ++# we pick first word with short options. Long options > > ++# are guaranteed to come after whitespace. We use '-' > > ++# prefix to always have a word before long options > > ++# even if no short options were passed. > > ++# Typical MAKEFLAGS values to watch for: > > ++# "rs --shuffle=42" (silent) > > ++# " --shuffle" (not silent) > > ++ifeq ($(findstring s, $(firstword -$(MAKEFLAGS))),) > > ++silent-make := no > > ++else > > ++silent-make := yes > > ++endif > > ++ > > + # Root of the sysdeps tree. > > + sysdep_dir := $(..)sysdeps > > + export sysdep_dir := $(sysdep_dir) > > +@@ -917,7 +933,7 @@ endif > > + # umpteen zillion filenames along with it (we use `...' instead) > > + # but we don't want this echoing done when the user has said > > + # he doesn't want to see commands echoed by using -s. > > +-ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s > > ++ifeq ($(silent-make),yes) # if -s > > + +cmdecho := echo >/dev/null > > + else # not -s > > + +cmdecho := echo > > +diff --git a/Makerules b/Makerules > > +index d1e139d03c..09c0cf8357 100644 > > +--- a/Makerules > > ++++ b/Makerules > > +@@ -794,7 +794,7 @@ endif > > + # Maximize efficiency by minimizing the number of rules. > > + .SUFFIXES: # Clear the suffix list. We don't use suffix rules. > > + # Don't define any builtin rules. > > +-MAKEFLAGS := $(MAKEFLAGS)r > > ++MAKEFLAGS := $(MAKEFLAGS) -r > > + > > + # Generic rule for making directories. > > + %/: > > +@@ -811,7 +811,7 @@ MAKEFLAGS := $(MAKEFLAGS)r > > + .PRECIOUS: $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c)) > > + > > + # Use the verbose option of ar and tar when not running silently. > > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > > ++ifeq ($(silent-make),no) # if not -s > > + verbose := v > > + else # -s > > + verbose := > > +diff --git a/elf/rtld-Rules b/elf/rtld-Rules > > +index ca00dd1fe2..3c5e273f2b 100644 > > +--- a/elf/rtld-Rules > > ++++ b/elf/rtld-Rules > > +@@ -52,7 +52,7 @@ $(objpfx)rtld-libc.a: $(foreach dir,$(rtld-subdirs),\ > > + mv -f $@T $@ > > + > > + # Use the verbose option of ar and tar when not running silently. > > +-ifeq "$(findstring s,$(MAKEFLAGS))" "" # if not -s > > ++ifeq ($(silent-make),no) # if not -s > > + verbose := v > > + else # -s > > + verbose := > > +-- > > +2.34.1 > > + > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sat Oct 15 05:42:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 15 Oct 2022 05:42:16 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-14 Message-ID: <20221015054224.82EF44014C@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-14 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 5 | 0 | 17 | 2022.08.x | 12 | 11 | 0 | 23 | master | 83 | 654 | 18 | 755 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 273 host-gcc-initial-11.3.0 | 29 bearssl-0.6 | 20 ca-certificates-20211016 | 20 slang-2.3.2 | 19 brltty | 18 host-binutils-2.38 | 17 coremark-pro-1.1.2743 | 16 berkeleydb-5.3.28 | 15 libnss-3.83 | 13 host-f2fs-tools-1.15.0 | 11 igd2-for-linux-2.1 | 11 dieharder-3.31.1 | 7 host-gcc-initial-12.2.0 | 7 host-go-1.19.1 | 7 host-sentry-cli-1.59.0 | 6 libee-0.4.1 | 6 sdl-1.2.15 | 6 host-gcc-initial-10.4.0 | 5 libglib2-2.72.3 | 5 crun-1.5 | 4 dmraid-1.0.0.rc16-3 | 4 host-binutils-2.37 | 4 host-pahole-73383b3a39afe86... | 4 systemd-250.4 | 4 autofs-5.1.8 | 3 dahdi-linux-5c840cf43838e06... | 3 efivar-38 | 3 fbset-2.1 | 3 gensio-2.5.5 | 3 gmp-6.2.1 | 3 host-binutils-2.39 | 3 host-gcc-final-11.3.0 | 3 libcurl-7.84.0 | 3 linux-6.0 | 3 netsurf-3.10 | 3 openssh-legal-info | 3 sysvinit-2.99 | 3 toolchain-external-codescap... | 3 traceroute-2.1.0 | 3 vde2-2.3.2 | 3 batman-adv-2021.4 | 2 boost-1.80.0 | 2 dhcp-4.4.3 | 2 elfutils-0.186 | 2 fontconfig-2.13.1 | 2 frotz-2.54 | 2 host-berkeleydb-5.3.28 | 2 host-riscv-isa-sim-1.1.0 | 2 host-rust-1.64.0 | 2 libarchive-3.6.1 | 2 libnss-3.84 | 2 linuxptp-3.1.1 | 2 lxc-4.0.12 | 2 musepack-r475 | 2 nanocom-1.0 | 2 openswan-3.0.0 | 2 reaver-1.6.6 | 2 refpolicy-2.20220106 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 acpica-20220331 | 1 acpid-2.0.33 | 1 augeas-1.12.0 | 1 botan-2.19.2 | 1 btrfs-progs-5.16.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 collectd-5.12.0 | 1 crucible-2022.05.25 | 1 dash-0.5.11.5 | 1 dropbear-2022.82 | 1 expat-2.4.9 | 1 f2fs-tools-1.15.0 | 1 ffmpeg-4.4.2 | 1 file-5.41 | 1 freeradius-server-3.2.0 | 1 gdb-11.2 | 1 gerbera-1.10.0 | 1 gmrender-resurrect-0.0.9 | 1 google-breakpad-c85eb4a59b6... | 1 gpm-1.20.7 | 1 gsl-2.6 | 1 heirloom-mailx-12.5 | 1 host-gauche-0.9.12 | 1 host-gcc-final-10.4.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-protobuf-c-1.4.1 | 1 jack2-1.9.20 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libglvnd-1.4.0 | 1 libqb-2.0.6 | 1 libsvgtiny-ea9d99fc8b231c22... | 1 lighttpd-1.4.67 | 1 linux-5.10.145-cip17 | 1 ltp-testsuite-20220930 | 1 make: *** wait: No child pr... | 1 mariadb-10.3.36 | 1 mender-3.4.0 | 1 mimic-1.1.0 | 1 musl-1.2.3 | 1 netsniff-ng-0.6.8 | 1 olsr-0.9.8 | 1 open62541-v1.3.3 | 1 openblas-0.3.21 | 1 openssh-9.0p1 | 1 quickjs-2021-03-27 | 1 snmppp-3.4.10 | 1 uclibc-1.0.42 | 1 umtprd-1.6.2 | 1 volk-2.5.2 | 1 wolfssl-5.5.1 | 1 xz-5.2.7 | 1 zabbix-5.4.9 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/f1baec73a949864679703688a42fd7e05ff42e1e | mips64el | acpica-20220331 | NOK | http://autobuild.buildroot.net/results/ca0b40fc483015afd27827d60d904dfd6a0d8e80 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/918b883f334b24031f5253bcae2d82b34ab743c7 | ORPH riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/abdd41a13912708d212203361b09164fe322054f | ORPH armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f278d849fd2acef373d5774543f94a4a3a5fb593 | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/69343902c4b129451073287f09d75c4f52770ccb | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/faf95b325436430290de3202f2c72bb2aaf90a86 | aarch64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/f01073614b3786fd9fc719462daf188e81ab5d8b | aarch64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4023f7a2b046a1b4f5a29951b1fe6f201518cf4a | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6d9d7f1e7da819e60899bfb454cf8853cbf02d20 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0607156477da188aded3bc4afe1a2f8d2fd33c62 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2e8098a988b8bb774bc1771ec3baff5a68833c01 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f6d5b819ac0d1e13e054242c11262e95add6750 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/323ef854838e1ddf80974d1b9547426e4f987e06 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e532b99dba5a09418b19ed020b769f706a4c082c | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1f9a726d54f685218b3187787e53b804160b0589 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f99a94978e3d22cad5e5fb34fccca49a9ff6058 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/4a6b262a7b710106e1f43980bfa1aa04221c6fbc | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b23eb4d079bd63fc108ccac862d20b93052312e3 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/267e9e6a22da9c71bc69161f586ff7d8ba52d2e1 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/400d1b709342998b1d3454fa16bd0b871f46dbd7 | powerpc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/068eb5555e15e0a029270c9a527bbd8b2f357a90 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/08142b13ad6f087d67a2b757ffeccaae14393e97 | sh4 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/acc832abcf3cba12954d2a73b208702600bcbca5 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c75c528849520d903fc6271751e553ca289f3b9f | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3a81a5b2a02bdaa724778d6cf69e56e38413b159 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1db027dbca40c35581c07812180c365246ab4879 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ccd637c672febb89ad15547a96d612636c9d5ad4 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b7ec6564ef86e87c7de78b8731b2d879f176e0c7 | sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d1865d66f2e97400d2b596c9eee2c26db1ad26a4 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c154f6dbc42bdba46fc33653258f6100e0769494 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4424f11d02e166ba0b77d40850b384ba978b9458 | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a6168d801f66b5637f3dc6700ce93e4e649dd944 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1b50e186a10b3400c417616b337fa96853b68310 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e96f52579212e442536b235dca23a4ed53b884d4 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4fa3155643f274899627125e45ca1818c3ae070b | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/36c793bda3851827abb7d399d6c708737ed8c07a | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f3b476ccbf936de74149758b7baca6870a607fc7 | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d991f69b47e4b05f57de586666c20ceac890f70 | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/442aa2f13a3a8d3ec48ceac5214a3852667546ed | ORPH powerpc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2c8faa8b3a21b9a2d748360521bc3f77f2dbf179 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c26fd3dd1a41537b43f61d78344b93f83ea99805 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/9b5ee356ca059e6b4b5cd8c574257f6aa88ab3e1 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1d7ae9ad4d0ebf22a5d39f61903a75e9c45666d6 | ORPH arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/496c46ebc71aab3c205ba7e5a6e5680a3eb32019 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/7108f71915831b941f9ad953d09e83385c49d137 | aarch64_be | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/bb0a1c72e25a05fc5c23eed5d2823f5eb00e1ac7 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/8d97a937c64aae35c75b91c352d384d5557f4987 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/509138f7ba5f248ecf33ba47c17e17a209f19761 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/bafec897850252e0136e367f1936be99cf999783 | mips | brltty | TIM | http://autobuild.buildroot.net/results/2e4cc76aae638b328b90c1223876253eac3f554a | arceb | brltty | TIM | http://autobuild.buildroot.net/results/61c00f8b0d06d3397f8035edf9b75a600ecab5bb | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/58aaacbc802873d6e55f95cb55c9961b13e9e3a9 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/1097ec96cbca07ee746e97df4a62bc599348299f | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/b1f2367086f1c11800e087c52a95ab0a46b5a36f | or1k | brltty | TIM | http://autobuild.buildroot.net/results/4b2a4e9655d8c01599828d60eda5dbceb3100a02 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/1a47154e694a9aa16a6e04b1ca6dca2bb1830cf2 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/4633d8e656c6df3a89bd3b14b4de66a4ec9a2df8 | mips | brltty | TIM | http://autobuild.buildroot.net/results/49f27fe555e20009777aa574b77bcb89976a1752 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/a05c11583907836f96558639ac53a098fd96df85 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/bc642846946eca70cc59b3709d434fbcfb31cf5e | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/891364f3c5422f18054aff8616217faf60ba0977 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/f791ccc43d4cde458a0c61f4272e25a91b33aa59 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/a0a0cb2c6b29e667e07bb2b3c52c49a0d11c2a77 | m68k | brltty | TIM | http://autobuild.buildroot.net/results/08bfc6e78b1affa3ced485ec652392986e234916 | mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/fa2d78216037128fe61e7db192f7e97bc308706e | ORPH aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/45248be80cfa2b16c822055a729094a56b548491 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9933a82308edc23823059ef1eb81213128b8b1c5 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/380dc5525cf27d9129b410652c4d3bd2b354274a | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/8c153497afb1637e08d62d5c125d902ea48b00ba | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e70322928313c18d304349e6b93d2c7276f017af | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/675267f6502efd357f28e143a628e3b281a34bc4 | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/326c572684edf521fd7d56025ef8e42e917b32bc | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5fb22a6d3316f5a538da3662c8c8a57053ce37c4 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/773d9e3ef65bc16923e3a481dad0dc793ffb4b15 | i686 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/58a7c72391b09bdc8b5c70f5f7eed62be57a0a9d | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c1d40ec663e5e5f9b58b5df22fa1eed00cca1025 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2a2103ea188990b525fb20ed4081631f6925b2d8 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/696efe4b0138936f8f45c73e3c008141ed49458a | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/577a919b4e137d3266fd3175bdca31293a5cc747 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/355f734cdc7bf401284090777d7e358a09b4f4fd | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0a15a45567ad9a4868d7df9085c8b29787d87a0c | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/64cf1f776ac02f88e16e8c34cbc387133630b7fe | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/84ebd29d7971ceea574f535e584afba4429999d3 | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f0d255181aa081f3c2b20e42ac55c2dab1970ea0 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aed56dc53cf8327fc16bc34e2dc440ea2b7709b | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/177f38b48e1c0c590b7c2d017a776bc664a15507 | aarch64_be | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/1b0f0fe48b3ba348a248c40345b24a153c3ba79d | ORPH arm | collectd-5.12.0 | NOK | http://autobuild.buildroot.net/results/3b57c968dd2fa8d99bcba28e1baf8b519b800738 | i686 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4ffe46abed939a0cae82f43e07fb7bfc2ccdc348 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7302f102d4e3ca634b0266d8f9548b48028ee1bd | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3eb7393d8ff36a8890c8fbefe3b37881ec59c5db | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2754fac3c0b8208b12fb9f4f47b2973a5ff8dc23 | i686 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3518529f8933ff3048b3bd48b12a672b081f6ba9 | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fd3ee9666ddb3b10d6614bd45622ec8ff8b1935f | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5ed686457696d14ff68fbfc39e9e797734a757a5 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9ba639477b19f036efdd2e890408223e8f54030c | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f4da94659a221d6d9ae784c9a8d524cb0278cb4a | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/77a034bad922f90b70ece473a6d81e99b26af2cc | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b41fca485d82daefa813b29868605da6b9d61d20 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8ad3f8adb5c39e5c61c2b3fef94526e78afcde0f | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b5ded96bb44a96f6d3ef915f63395e1859358b62 | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/63ff2b88d3ce5c8a423f9eb3bab2ecd578d9cd71 | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2095657d2a1e1c78bb0362d907df6d551f5f69f8 | powerpc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4743894bf68738fbcb978329e6863a6b6bb7512a | s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/3883dfaefd8bd05b082bd7a2c3af716b795642ca | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e0e73499ceef874ec28a635fe5bbb15628114add | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1defcea890fed1d531d16302551bad0627e19ace | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ee82df01b4b91ae66e08bcce9ced6a936e2f3ee8 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c86d9b09aa595498bbe7a5cfe7f05aa2364ce49b | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/cb49eb413ad607db471b67ab70b3976c5d378a0b | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ce4fdfda2349c349cd71fda336ee8a475f8b6a3c | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/fd1221aa18ab1e883e0af5dd200ae24106f605f2 | xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/87c2e682f7083d20e3cb2454d7ed5dbb09e55566 | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/8367bebfe7e453f5c9c8f046b5885a675c210303 | ORPH xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/e5241ef01392c127b3efb556c36e55bebb85901d | ORPH m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/fa33f1b68e4a9ed796d69230a7842ad86423aa9a | sparc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/537a63e6473c0692073ca6f0561e924016f9d9f8 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d749db0ee3a71b6c6a6b3644509e7e2f29e5b654 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/8d50baacd5cd95673c542e11de0930d66c35bfc0 | aarch64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/e690516e4d73fcfd1306d9cc719f9b198d4090bc | nios2 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a6e088b0636512f62c1e1a9ed1b3d9f7dac2f127 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/1d92237afb3ae344c941b833b0bcc141ecdfe99c | microblazeel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/40467e1b5f956a45a973f3a3842e425a223aa4fa | ORPH or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/ef82f825d48909105b90a244a2cc4ece866192c6 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/0327b7e3bcb956b75cd40a72b2000847f0bf6558 | ORPH mips | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/b876ba6a82904e0347e1b8f68584c3c99548e6e7 | ORPH or1k | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/edae8ab42443d4672d6e2774c9e8fb4b236e44b0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/8d8dd64adf0c2feaa69c461c4f4714fd528571c0 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/67731f24bf5a552523b675ebaa127e1f6c92e305 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/7c94ab97246f350cf6e53e08f5d4d67c718f1137 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/0a14e14391b7171adead1c7d3fcc77e57b676085 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4295369dff3c02c152050dcd0394bebc15772a77 | ORPH powerpc64le | expat-2.4.9 | NOK | http://autobuild.buildroot.net/results/85cb9b0c0ac0326e71f12f756325486c94bf8173 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0f724815dbd87cfb4839e102c0ba1f2752086d3 | m68k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/b1fd47e37292e9ef03b19768b233326b45e1dc8b | ORPH microblazeel | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/43768879fd125c4aad4321e9fe5707f2bc72d632 | ORPH aarch64_be | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/3ba836f81d11e59a107cc4d5e0068dc9aa9dd0dd | ORPH armeb | ffmpeg-4.4.2 | NOK | http://autobuild.buildroot.net/results/190a5d9f7bbadf27fcd2f849a1e1b3819ec6b334 | arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/25adb49f552f156a5a58b028172741445e50d3fd | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/7a8004eb22b7da43348ad355c8ad55e4f743901a | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/e4ce3862481573b51d1ef53cceb2cfd60518642e | ORPH aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/9c7634c703917877faa530d094be1fc48695675c | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/00127456af2481ca58ce11672271bcfb50715c36 | armeb | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/3a8994e7138660fa87281fbebb32712abc2350dc | mipsel | gdb-11.2 | NOK | http://autobuild.buildroot.net/results/a94dea645cb65780196fc5ccf4b26df8befd1c64 | ORPH arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/eaf5599ded83d1f12a890387fabde174e795c527 | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e43a0fb738b98590549ba9e678278dfe477aa1dd | m68k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/168733747431233ea3036239cf67ff926a72a9a3 | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/7dd547a88ad5bd266038614e1fa8bd76355f10b6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad54da221e0bbad20d36b6f2a8488152ea240e2c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/79b8e4a11902f60d7de39e4827e6de99ed3e5c1f | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fcff5314d14297e0b3bd75e4672788502726842e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/73a51b00b3e71840084bd6386dc5843ba22c8bf7 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7cbb3faca07a16007482bec40013ff9d144135d3 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7de7f7886b938dcdee7a5420d361969c813885ca | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1117d8d9d24f165412786ee226e8bb3971c0aef | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0549ea3731a3ac25eab2ce01b961cdbadbaf3a5 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58af588a961ca584d2144067fcf24995a201691c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/50d31527e5f72663a82d336c413a89de8cb6e499 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cb18a135dbccfa1411aabb130e8395f1e82b81a | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe075d64a0213d0b10a8635d9014be5067deaf33 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8bbed46516e063e3f677f5c11971b6b7960ba8b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd576395bca9ae9d93e59517c878e57794046a2c | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33142db66ebe9a30759f0161bc9b9d77934c8b87 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0113088d5234346a569765b21b0d152716ac0de1 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/098c82d8e8641b9ba1e02a25be94cbd80e289e92 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e46dd6091cd4ed9b7f02c590c85c8319aae3379d | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe58169a0e8a9e66df20be6855b1ed6dc6332142 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1d9bca75c699bbd4093cea8535bd3a064381275 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c197409a9bb92454810fda29087c37d8d837ceab | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3eec57d4d6d77fa026492b723e44f119eb43299e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76083fc6a9312f39ee8de8ff012140b1ba5a0118 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e403cf3229e426c08e5dcb7c5ae7d89d8a349ad6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b9f74e91df35ff5ef603498693da3d390ba8ac5f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/57b4b4fa6feb74cbe82c153e6b3f18cbb33836b5 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d485dab5f5dea7d94ee35aa80a42a626cd5fe0eb | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bf86aef75d39ddf0c6b99ecd06b75930ad0621a | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ecee4f2881c6a26122d0ef7d7fa3af173de73e2a | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4677e333eb9c5625efa47621845cc4c2c23a17be | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5347bc313eb48b7973550e2c6c84c35d48365c68 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab6b70bf05d5348df9f5a2c06d360434eafaa47b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e8f2af22807cb9ed725c536fe6d5a077d69c464c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/312c54e07dd7b42b2b88e01fa626cd87b17d77a2 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da87736e6ab9720cc55988122f0475115c519158 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9689e94f9c6874b8fbe43c7c07afbb4e0451792e | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4809d6a86cf512a7864f0fe1461ba9c647dc9a06 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c6806646c0886baaaa4e8c58d9ce7b74b9660ae | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/29ed89b94d33badad46257afc5f7c624b74be2ac | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ab15f57d4c2b246e481fe16079870f6c999a783e | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f0f77eefbeb3e919ee3f19daf67c87ec3028bdd | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/54d06259cdc86a8bdfb9494c99d5903fb7244775 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaea4b844624b5afc68c8170e2f1fa4d6632bc3a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a3a02865a17906ba79f2b687ac07b5ddc4bdef6f | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bd4b91de1dc139394559aba0c08e37a3ed4c27b | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/210f907633eb31371ead59f1ce0fff55b0920da3 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d895fcca19059742e0773a9e53b4df14067b4966 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9b363be00a86e56fb7145b93d7f9d6d42f735c71 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46229caf79ad4f1ec5f774e4a60304f2f22830e2 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b0553adf6a88d02585e40e8f77d24a379e3b9b1a | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/899e69c29e91e59fbcdf9e5adc84d7ca6e7a7e18 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3723577c8f5a1e21368f7958ab1889d5eb790141 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc1b5a1c4b44122ab19fbb5f65beba2787189aae | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/294c2cd71ae6d10333f53056d3b8f487e0b5d3af | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/533ed47246e4c196467b849430c3fac88ea54750 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fe5f85c446193111d4f4ff7cbf09ae37081ac139 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a782ac9d17aca9d9bfa55c0ba1a721d1997ef283 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ac501611ed8ed97d153b41679375a2d89141d63 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/27e9a3fa57528c1a5a4a87d62b30ef8f0cea25c8 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4f89380b9cf8edf49cb2c8578590557a4928b4b9 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cd0267c581c6c206f27d3071c46c16fba17ed9b | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2414e4644656db22df8ba9e64a2d1009b975ab3 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/10b961235784b0c2d0bd8d1cfd83d64f319a147d | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f9f54e7f4f23400ab77d2f8946854345e8691a31 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61f740c9bbbe6cbfaa432c946ad3df21f2d0d9a0 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a9c4f6ef656771e142da1d18b6e95278e6e739b | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/427710e610b8e2a7ce801a6e63be2c22ce015e90 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c108a2e5d1f56429ed372fa2da8201267af70dd6 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/328a0058da14f47852e331d59ad115fe0305c411 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cc6b53b20a0980387360221f779d2e082622140 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a2004c361c9246162301ddd8902305fdfd832d18 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1d03ff6b39aec683352ad787b37e2f8fc2205ab5 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac0960ca1f03e72e19482ad408d20c3f23464210 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/795408dafae9239ce36b83f35f9a29ad30df89d9 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e4d9bb89088bbb57c75405e1ba2cd5f0ec58937a | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d64b2e1b33343d413eb9af829586e2cff67bbdf8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3fec196cb3eb0990ac7852e034b2b6a6ff317252 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/682be6c26dd865758603937b4dfd1ff4901c7b76 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9eec06d0b459735f7b5d0a7714f4852d0271956 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da0504080f2617c87be7d930a4d4b9e9fe88417b | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6e0a10d53c46a659271784623a97c53ae194292 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f089089a9408ffd70c6900dbbfecd182d411b586 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1c19e0babf82483c7884ab12bebbee2e06a04b4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/58122f9dd255aa0a0e7cff54c36fdfc4d3ece6be | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3924345804ce12929c29b46afea989e4368cda88 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f68e88a50339014a7aca6179b0a72d75da98643b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/11e077035b75aa7fc21312b357f18e70c09343df | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2fc3e9a8ce120948c4067fa32b3fa29f310dd064 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5bd4afb9b21648fa661cbd983b86775465a344b | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/95755152915a67fb4ce0d35ec38ca50d8cfa22c0 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d411f3a21885eb75cfa93cc9e6ee395e36061d4 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37d7c78e90a4b03b017a498f54f261a282530ad3 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0c9c122a70043bc92cd84670e3ead3626cffc8d | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9d03380a8a93191ea224da8bed4668954123f6d | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4d236bd4ce7d6d9ec234309ff14c9806041c754 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/948c897b3ccede2e6d17dfc4e68bf90c90544821 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d3ce43e5f17129ac02fc54383f378120086ed9ff | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/784cd7a0bca8c65794c42839ede1a27af29c3fbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d8a9b5fa05f38ffc9f9dcaeded0b21a9d9740cf | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28a8e95ef0cb0674878a29c07f537b6fc503bf0c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/982df47ad335aaaabce9c9d3038ec0ad9264d2af | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4914b2d89075727d3a109de47564fca9e88d5e5e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5151f7352b7addaf351b480b1b884d8deb4388f4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/807c94d6bdef86ebbde0d5b6d5c05bedfe36e980 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96116f815666e6a230d4350076acf599ee8bd16a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ae80904b8dc19a3c21860ec357e50da98ff6ec6b | i586 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99b859c2b70c9cfdb2231ca72d3ac2f83d35d28b | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4383d64f38b4b12f7d7745ee6be66b1df891afd2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afd328233efdc6af203dcf22193f7b7a77cb9175 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/78e76b71114d2982a8fb7dea5f340253552d44b5 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/86d1300eeedb9522abc2315dd5324003a37d5629 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/09370ef3cc4f0670da7888610d29b826032f7149 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/342f4549204175ea9b4e95b7b76418d5c596c68c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8a9316053652cf6f3c218689ec37401c87aa199 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a499b37fba59bc4a279a3a61fb68df3308a8884 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1ffe485a44a7fb7290a26118a7c1fd025e99590f | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0195aa14dfa628f224e47e421b01e229dd72ea47 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e3899a579a4abfae5dd1a683cc868ca29316b46d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25326e537d08f0ff5b353318a936394ee520c711 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/80c05be80d43b322eb095ad5e1aeeaea9b2dd3ce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/595a445ffc363bc15f19b350419978f569875d1f | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/31ac4521c9a41c8b38a26b7f78ff8787bc6eec67 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5e7710628a9b43c462e909a40602be48455c7c65 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3ad50fd19c423a87124d3fb9011db01e629964 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61063214d0b62c4078f894d5d844ef3357435e8a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c27dd84acd8683ad292f1ebc6bee63095b42964a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/df7d6200203c26fc6adaa5ddd18241d0668171ff | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba6e9fb36c8fc30f16c14329fc16b697e40220a2 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98266d9450d25b9b81784b5203588af4fbe02fe1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ad761ac13da0f46d264ad3040d06472c01fbf0e | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfacdf6530fecbf93a8b20c2f5e965c69d627f36 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad29b3a6359c916cbf98f1681333d83476c5cb2f | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c9266f68731aa5925323223286d6b48a4f3a5a6f | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc75549c23ef515787e3b20e9e60e779586cbdc9 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8b6cfa7d8a8f34e8c00bb874b5cf3fd3c1bb8c2c | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eefe3cc74fa2d4b9883b97c64bf9f3bf87aa2bbc | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9ec96dba6c172091a3c6bff41c8f4af631d60fbc | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0675ed3dc4fecd9eec68e199a98b8c1f62ef30fd | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0b1098e665903f6cef132e1b6065b851d002732 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b51825182aa17c4d2df22bcf392f28e3afff9a52 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7343c623bdc2f3d1f67ac9b9563fa7285f55d901 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/866c2446ad4d21d0769add58bd9b527560781236 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/507a9685f2a27e51ca84d33f23f2cb035f53950d | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/33dfc6ba47525319343aacb1308498324c729ef3 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d4aa08b3d050b4e8a4c2c7163c2b8996cad767e | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc4aa6c612cbeade7973049bd2b03dddcbccf806 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6341c76628983f78f40830f8548aecdb5283b7a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c35cb4849f6f3a8b8377bdf09406274880a8da52 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dc3083873a8a657650ec2d8853f881ee9c020837 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/37600ccbb8f3f81ca8bbfe1fc62b43ebd79133c7 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3ef7278e0afb3401f481f1dc2471f9dd0a48bf72 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8404160f030acdd09133060d804b876b6f09df87 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cf054572f910224f522de1720dfce8b3f233e480 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/051290519862a60b1313c9e81e4b63c0b2b595c9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f626e8549550d6aca51c2e6f6095c9ec32a7fddb | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d84af8e9a86ff4798bd981d66be694c9efe17dcb | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da4087a0ff3b582da02aeaa0af13b44e4b65857e | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/25776745560936d56cfb6f30d6a798df9875e36f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c82e6a7683389fdd4e1c16b5844e66958454f8d9 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8454a1ba0d9b3dfaff1b5dd8d60410c2473fcfd3 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d586d3e9394d294bc543ffb76ea1fed9c8ae2de8 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a83cde970273659ab53947ed3c420aceb3729f1c | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6052c4c5cdfba53ba75dddeba8b5c044616d044f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b05bdda6130ad09113696ff8fe6a80e3c576ff7c | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cf418d7a5dfc2a149460ec5ab27f641f5a5f393 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8bfc8b0fca3fe2831c4831c35161bfe94e46cf6d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d8ff99ab14076adf8f73ee254d3a1e274208c23 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7e6c2438a50b72621244dc23af3458efb33d059f | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/afbc71617c8bb8a66e5ebe4b43803c52221df672 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f0c0cc3e6570060a73a226bd77f6fff89e220de | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4b8fa8db4222589ec09f80bef1f33b987cddf622 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6fdd5d5da16ff5af1143b03b29f311d91582fb98 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16f4641740915120a1cca9820d47786e23aa1577 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a8b7501e8b8bf0d6a3849a8191a48301d042784 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d5bc4a8cc62b3502b86e702efaa039de88cf95c6 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b1ccfabb41477e3edde4ffdd7371f269242d54fa | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e9172592b472c8b2ac8805cb3a24e198a4ccb87a | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6b51807a1a4358d62d647c5d4e3df8a5dcbe812f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2052c420aa048035c4d70872287649e10780d35 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad453f0b5abf4afe2e98e04250584e1ba0b23acd | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee43bbc20a45bc589edaaac2cb008443d3a663de | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ef0bc5bbfdff32e1e1e074f0d6317c3f45214de1 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9baeb2a99f6e2a4c1eb8aae3afb74469024d5bab | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a465aa7ad69714cab23dede4ee6002339bcb034 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/01202907683f0da60c1ae6990e0f2973152a32f2 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fddc46a146f9a2c4a4ea9e5385cb1fc1cc2debff | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aa3c889952994576fb49e5b1072e3ab029ebf73d | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55f24397e1414c3eaabed01fcca4ec53688ac3e6 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70ad21f3a22d969be56a512b0acc12d677268451 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/734e5b6ded24b86ae0fb2672932cc9a1ead0154d | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3e91b2428dc18fbcaf43b7ba533f6cca51c1bd2d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0221ecdf190c156e5bbc27d501c56a187aec2c8b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1bce902b2acea62defa218ad41105d960146f00 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00f1e2e4f9e732b87a2dc945a47393678fc36c9c | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee784d1cca31ea8d1a0336a8f348bfa863eddac8 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c648b103268dea45739ad31c2631f393010b2739 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec82c3c2688048225626faff5f0877ba3b6f7561 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/120ea3ab64ea22c6c2239d40cc51a3876e4f7718 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5539daa3aaaea46e028075a0fef6f86d41218831 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a494c982712a2abb969b9f179be1282fd25b9553 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cc20ed5856ca7720fd6d22b3b4965aa758cc13a2 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83f10648ae0e1843da46763a96efefe1fd10b609 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/17b7d1f0223787ba0c5d4b5209c9d8dddce28862 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6638522f4905af128210cfc12fb2ec8576a64438 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/055433a2fe91112bded485c29ac8eae25a823661 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1471b9213821af142b77f4f0d0558cf720b348a | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76b3ab9142f6654d9c06ff07c3de7bcabc4bf816 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13a0601f61bf25f48549af02eaa523664e788338 | i686 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a56b1c17151f3220dbdee0c741ab12057af04991 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6952292ffbf11b43e5f3c05b5ef2501cec0c5efa | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69833e8e8d3d409424bd9b15cc164229137c843a | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8def78b3dcebd287cb8004f632263314a0e6bf5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a29d95fafda61208fdcc2758ffd68a274a17e739 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/281280d59e2f935e41afa84a045f171d9b7efcd4 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/215f311de24ca3e0ed257954db5ff6e9bedf62f2 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0059a31244e44b4f9aa4b5a4cf32dc53b5a69a50 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30992dd8857353424178020ec84f5da218062138 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/40d6255e049dc0d4725aec659d4aa46145c8a8d7 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e77ee1de2eb5c0faf30026aa9371f62d36da2eda | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ebf020223706117ee93284eaa6543bf9218174ba | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f7b5f4ccf64c6353f8f530f558c5e561d7de4e3f | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/471c58bca3eb132c46db94f7411b0010e59dba41 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6af6624543ae2ae4c934d4bb1a0b57334ca2f56b | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac9e51c5faeb81d16c9f3565c0ee6ca3f511e69b | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/52564cfb16645bb6833ba9ac358caa6c07920ba4 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f19ba5a85c52002aaa1ac602b10f5a34e32a1084 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4e32cd221204fd92d1901c564ed026229b21e824 | aarch64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4d7aea365da1b7a5026c1faa34ca5682e5e78ae4 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b484327d8ed9a1fa37373fb8b2325843b9057ae | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c10a14ee0fa3bc5b9e03b7286b254a561a380afd | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/072381653b80df24897cdc36efc730b1ddf8fbbe | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/99d10cfe2021f4b74f621e16ae2b2a967a35423a | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6d41fa979bddfbe434e07876be4bd77a12e1c56 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ddfc4f181c3213deddb4c62534c89591e63091a | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c5d25490182a49abbf99d0b61a3327e364f2169 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/839a746e6b7ef5a5a68e4389222daf00e41984f0 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bd1700e5e607d23c1d678eb835dbdde69bd1fdc9 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/47148e63380a6d6e8a457f836ea466efec87d1ef | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5c6c55b5404707f527c0792b736fcc7c73b16e2 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd847ee7f5e903f0ee8ae92b348a8678533533c0 | riscv64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07e769fe945ea4bd1200509de46b209fc0125e28 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/67746eeac5399ff970cd2c3723b209e3e9bff7fe | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c033b9a22d392dc5bd4de828d17b04d6419d5829 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1e9e4122c569f33a3285e1dccab168c510d216dd | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8ab1aba060cf5002020e137aac84d1c7f1e22aa | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4c8a57fe0c896b09ef632037d5be6f0f59430042 | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/93799257349ac1f3dbf66a0f87326820475d8b17 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e6423d4f42f4efa3dd2a5943836d57d74c3e113d | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/30aea8ca3d52368df8a1a2a0b5e46a1f62f31eca | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/28ff8a7f1b4d688ec22de988e3195ca31166fa79 | mips64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/469f8007c35a87e800afe78a9bd79b56a758c02a | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c08c76e1c12ff217de90492af75980c3c9ed16e8 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1bbec84cd2a5003ef14c8b135ce0109978f49ba0 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1400f26ff1cb937d804c568ea86c266695e10c05 | s390x | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/efcdea39f3fd8e9258d940fb1a275ebf9ecbf5c0 | aarch64_be | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61346220493308eb838feda760d4d6204a07e732 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69651c266cee83b04a897a0fec4ab98bc2f98b45 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b4ac9d6ffe79e593a15d3be91c1e22ec505e9d5a | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d291c25c67b738c93cc66f063f962b682c7adac3 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f2a8e86e26659e9e242bcc0d1776c0bdc0e2f73e | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e1369ac07d8c423a316b09e735af3cdbe094324f | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d222e6a284b7a4f5a63251f0f453e8bce0c56617 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dfa54d3f43aefc3a50db5fefaf94274eb37e3047 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a6b122494cd7e5e5f549ed8cc6625201feeaad71 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c5b78c23ba9014c4be9c132114705db9fb8216b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55c5906fe603fb705b223db9ef5c02d1d79d6f94 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b6757f1969458b2da9ab05e96fdd5bed9780771c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/468633cdbf0c5acc56af333c1c18d32330f19a04 | mips64el | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ed3b6b9007b1321cfd78e668e6b3c6508acb421d | arm | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dcaf90529bdb6cab453badb99b23e12648b14023 | armeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4769cc0cf1fc8f42669417d6e816d8ba22809941 | sparc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5827df1ba85d170c3d220bb93f424d051c25a19b | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c0ba98f2a431ac45b31b69acdb0e2db0b237c14c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/b286ac0f87e9f17f9881739972c20ed931971f7a | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/04d34db3ec9f055ba3e1fa10994b1d36aeea0767 | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/5d4487cd551573c65f3efa79dfd1363659ae3103 | ORPH mips64 | gmrender-resurrect-0.0.9 | NOK | http://autobuild.buildroot.net/results/0634c0df56dbfe8f0dc9c95ce736bdc4bca156c0 | mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/575f30ff4b9ffd578a1caea71b1d37912b17a4b3 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/133c03179d9a15fdcf50e42c34363996604db838 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/c1ec76746dc3083ec0ad9e152b3fbd76d4a8e0c9 | ORPH sh4eb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/c4af2457dbbca3de200f4561b75de80a4319367c | mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/058dd8cdb6f7cf35185b50634d6c01cda6c2d376 | ORPH mips64 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b873074330c5fb6d9a3edb6ac9f4cb11f58cd66a | ORPH sparc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/c6a77d8250c8563eef3287752177552394c75b24 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/d6d7346cf533257b60c1da99027a2a3f86b23a58 | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e4c29a8e8a5e0b60acddeec6fc6c36162edcc35a | riscv64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/381dd7d3993b2ffe2a6a7de9e357357bfd3a69ff | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/76edfd8c73e22fdeaf038875cd051d472ac9f3c0 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc598d466a7deb5253af06ec57b641e0c28e2e94 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ca202cee08181ef3641fc71784a888654a57d364 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bf2855780649cc4554605fc179564b13f3351b63 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/240cfde7d58797d237c2f0660f4722556118dce0 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4b47f6b2785c3a1b7459253e7995464c99594a26 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f9e06e753ddc11eff69e9a4ee9a213533b2f961a | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bafac12da293cb6a795239c01712e609c46384aa | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/24834ea8dded38d520c5154d4d2a6ee3f01acd6c | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/78c83599e05197e8db0d9c6ac3817f9074a34165 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d6fe2b7050ae557351d3ca16bddbdeae9fe038cf | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b4d837d1bd98fc317130eec6059d4b515ae7d067 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f712af13bb3c21c54c38275df2e955fbe460beb8 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/175272180ced3b38d886ed1406132d7cbe5a5fcf | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/171c10eeb6c50aa2f180433f3715bc8b9d40100d | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b9f23e9b54f111a578bf98d2f053594e2b14f3b | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/55b313e225df00433d0603b153b78a9e4ca9880f | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/d7054ff4a23573a91c84c070499badc292b4eb41 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/c170e21954b65df0967787c41109c443c1f12ef8 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/2e430152f1b4d808a70574ad7064d725273c4f89 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5a0fe4715bb42c2ccc75afc22b378e6ed67455a | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/545e080d33c7f57fdbc36f05491927fc1826b426 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/321e3722ae5042e46f6ea0b8b8e9f5c3db9439df | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb62bca2903346bae2a69f51fc4ec3565377b4ec | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19517b07a21db4ec645d4f062a6a5e7d1a7075b9 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cac0325c6e30857d8c79b0e6cba125c1c5e6149 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6366f60bdb4ba9ec18cb02b3e95a304e88475c07 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4479c05ef126fa0d6c716a9df616143ab1ffca91 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/626418d95c0721b8571b11402fdb2d2379240b73 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6caa203d714fb0f39e317e36ac70c3987f469f08 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f3d7f60a7ed87cd0f9c19e11f2bdd40edd172af3 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/ee0d6098f02f84045ea5a1c67267db028a9ab413 | i686 | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/c9c0528162002eeaa2c243337dc500681bff8234 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ebe7249d0c751444e78e71c6a8e1d0683e1ed4c0 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/5efebb541aceb22269aa1c3d59d7805fe4e451d0 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e880cb53abf65d13d8571156d3d5be1762df05a5 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/746e86387b2b71c552e302d6c6aae4fab9161bc5 | powerpc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/3e0b395770e40104d9c46e3fa2bc019d22df5d71 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/3dc1ae1db09629b0ca3dc09ba6c5b32d0ae8abce | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/2aabd652fb3244dd7d1129f80ed699a52c578bd4 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/340765438eecb11579da1e2edf3bc445a0406b73 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/30a17c4e27353929ef0773b91f8e257b914b837b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ba59dda6738b2a8a845f47decd4fac9a4d998ccb | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bfc29eeb3424aeb2c3d38316fd84b1475fdaa3fe | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e51d26c4f08a715ee7e918f33d069aced20e7e65 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/9fff992240e6e1217941e61ab5768fc5bca7e225 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ac2ac0e5519e24a4ba7a9b0fb47f938654e71f8 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d1409562358304e86c0b5ee1b5c1c762d5236f30 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/974e18c2064cc7f77892da27d6f5ba9bb20ea4a0 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ec17a81ca4ae90617dd5d20c1f216a97778109d6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/96c60f688ec9178da4bb5e4e9be542f5fa19e30f | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c544902297a51633a10f3e7b7a4406642e775dc | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d306a367ac81c1328d869d596d4074ad7fe37984 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/474c07c63cd90fb8721b6d6584a9381e699b96b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/95d3e1d31c2dd9f5be41c9615faeb96908877eeb | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ac43255f429a51e93b1e1a187d86132f1764a429 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fd6c8f13b8ab0cbcaff9cec9e0b0523959035bc7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae090dec7f267ecab407866f5c838ae5bccf9d32 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5c5324a205daf927a7410d993ccf64c09e1be1a3 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/12bd2bdd82384a42569dad9cfa735fa42b84468e | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e55b48d6967544004b0876ae928b443fdcf6602c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3e28fc0da11db6699ac25f5e55385cdb2b88abec | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7cc1c2ad6dd98eb329f7687da0299cd0d86c2188 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d4d344e06b146a9dc9ec2f6d227e3300283266ba | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b9f51b2232997d5be2ae8a0198da8d5663894131 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ebf466007116590b5e31d145ad2821f0b6f3731b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/09e57ceac020a2ce530fb97707255dd928c42727 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1ed75ce3de394452496b015df9a6ccba7300935e | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a93d6743779f3120ac88e6c05a321705831e6c7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7c496c9b559609b2caa584149503fe9237505d9e | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/97b63508d2f18b93c267f0865ad8fd42d7233879 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/eb694f9012e211d845d50d337c528bcd31c5b004 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9c2c25c1bcc3c341d0eaffdb85585596995e09f7 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/c3b00d10955e0c2e292c952ea16aab982ebb2b8a | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/290b45ad453e49e3fee90c25aa8e277de7e04e05 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/20cc724e35483d50828218b0369b74733fd0c8c7 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/df136319d51c6b855b34601f3bb9273ffbb86417 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/2a60470204cf0a2a9bf379f948adfd3856c68698 | ORPH i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5477bd8970ad78ff7ed6ff58a30f64a3d643e3fb | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b2733ca1c7408218f81a3c30bbd027c09a890eb1 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f0489e602bd87acf463628cc7f7081ef1d055f98 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/49a37a12a9deec9ed7141997090ef840723e3a33 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7cbb3624f3e170a6c119e2ad73fd72fd2f9f28ef | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fa4cf5c8746090480ea409897dce154149572fac | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/eca49aae26193cd9e5a6d5fb479a73618ee7dcc0 | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1c81febc933aba6cbffbea526f9e9876014e7d18 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/257116be97b8dac3cb79fdaad5cd1784925cac47 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/da5a0dbb7eb5b901d6d9ca7cc426befd460b1426 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/282adde74d24b1ab02e85b12a4ace52f5ac7c62f | powerpc64le | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3627729af5e4faa87a0aaae9dbfaf77e2b6a122e | m68k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/bb96eb9296e229416b87ce2db77fc7af613f1275 | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/643f0684418fd69517f1ec097b8cdaaba9173103 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/c35ac51f99bbbe65d02f6076a4ea3bfe56bff2de | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/93a99c11ac76d7df3c6d8742f94ca34193ff2c40 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53d01391359b946b8f8cfb2f0652ce02c8b84b0f | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4db6faf8da1857d0da05d0d1acfe3acca53d615f | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/529af12d514dcbf338d606ef3112d6e3646061ca | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c15ddd875c3ad5ce7941089a03a5c6fb8d9a0478 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2c0c3ed98a4bf6f5c4353d127a57e8adcf3d7028 | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/360111206fb0d7215fdc2c89198a2722b4643801 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7ddadb06419b6dd8b04655c610e0b77c47ee795e | i586 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c4ef9a2bd6c0414fa1ce2c75eae93dfc09e4be85 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/917904a7729dac096ec37b58423dbe9c1b3d0828 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d80e576ea2c5acf8039d9446f3457a916328bcd4 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5af2f99a4a40e888c0b1b42499cb248078fbea6a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ec82176b6362ed13995f3144d28fa8fb59d0d5a6 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a0008c9603a9dd894ae84b3ce4c78fe77587653f | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/61c610a15ef600bcf31f6326fab7497e7f89c3b6 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c6055b073f1704a9539d7a9742e0a8f9b151fdaf | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/25bbc289c827b12049e8ecee6dcf3e9ec1eb90f1 | riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2e5cda9918b823a1d1e3dfdae34744f515ddd4b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/342d5e82181a482209e81f4b601d1f68e7aea778 | aarch64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/48cc6b53ab0c0c8ab1097e1260c1d8a3b1d7faab | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c698561ea9cac15526b8a7e76afd0d1b650ed597 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/85bfef1c9d665588df346367d1151565c7d49369 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/0537362ea0a47c68040f5852d2a1a4a3c58b463c | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/456cfda8cc28364315f67e7d8ddee81fc5ea3341 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/965cbc45a8fb719d00b4fbc9153d01dab0db7e1f | mips64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/5a3e4fc002371204664d5ea758a23233093e1ca6 | sparc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e33eab30bf375240edb43063d97942ca290d31bd | aarch64_be | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/91a47bb1b1dfeeca79a99192904ce5532c56a366 | mips | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/55e614d35d46a24867fe42508bc07e0c02b13c59 | or1k | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e9f81842c91ca5b12fe38140dee00bec8c0985ea | microblazeel | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/d2c1875c8434d277456da98c634acfd69340ce4f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/aa18f906ca667027089524e1087c95c13e9521fc | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4ef6e1e1f662f278939ea7a98db04d1a60bc6bc8 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ff96cca0027804fb4e439ed9674386440a074292 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a21d00e78fef9e78fd092dfda2b60d52444e44b8 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d80543725e62d8e3c14baa7ded39de5189cbb8f9 | mips64el | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/d2b3b6cd80b4e25967025e365936dde99a5647fc | ORPH arc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/176b7e180a1b12a8259154a1c55fd54666aaa810 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/a2fe13249697590e3de73092e5922b2ba19f30e2 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/6addbe4f34e20e6b95eef6ac0f07e53b79281444 | sh4eb | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/fe4f148de42aa7146b1acca5f36e89b0f8e3e200 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/c48d79ccb10c2970b0100ec900d60c28313cf121 | mips | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/aa0edee22f6837e89678fc055a5684ca56aae36e | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/e4f42836aeea477d3449b8685d65058f6df25558 | mipsel | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/3e17119046bd277df6944b336af424622847c854 | xtensa | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/f9be31c2ae9668a86670c38135d0f84dfc0c3bb9 | or1k | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/9dab0094098bf2ec36753fa13db9020318421673 | mips64el | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/833a27281ae98d9279f4bdbd8bcf7affdc53016d | powerpc | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/ac3ad38f9208a9897f3f23e455fdd5cc2e109696 | powerpc64le | libnss-3.83 | NOK | http://autobuild.buildroot.net/results/621c8f22953db1a00f009b629a43e837ed4463ea | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d2a19e9eda42e99bd8b978f5a521ed3593735d0b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4649b2c7c5494e0d998cc757f72b2e192d4a66a8 | or1k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/56d8e97be92512892783f5bca7a80ee8af0859eb | mips | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/8e3dac5b15fdbab3d2cfe3bc6c399333e540c306 | ORPH arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/1e4b7a429ff690ec5d222ba121c31f96c99c8a3d | mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/d42b8bbc0f6bafdf35e1e2e7b6f1258dcec620fa | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/715c28beb4faabfb174ba002c5dd72ee066f5464 | ORPH arceb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/364f6884b9a534b5d9d1e4d41672468f46e499b8 | ORPH arc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/53e0c05fab60155bc6934f8449e8aa2f30727458 | ORPH sparc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/a15a6240172549d2965d68f4abb9cff56d81a8a2 | microblazeel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/9c638ac4ff5e3db198a410f368729ac361007ce4 | x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/b06e108781d82d71b139e56611f89446867673de | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/9797c46d9d3c1588530523c9c8142a0d508ebf83 | aarch64_be | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/5a0adf76c869091090fdfe6ff185809471664f5d | arm | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/fe9c758ad40994841145c33ef787eb1d0a7e6640 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/e925aaab09e86f42e9ad8bf02a2fc29e89e5ec15 | ORPH x86_64 | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/9c61fc0f946dbb580d55ec9737c7ff48a9d765b4 | or1k | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/28bceb69cf1825662885325736ead1242f37870a | sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/fb8474776624af4d30200756f1ddb9666610d1c2 | ORPH sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/669c93ef033bd1b4d82014bca159a92dd7a9b3e4 | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/2ba40235d3eb992483b139921c747bf7a9c66afb | m68k | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/ee2bdde7540afec6ec5c9d7440cf6801e2d93772 | arc | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/dd15981834c16d3eb3964a9d602c5f3d0fe1b5de | arm | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/31fe26870d0f54ef3a51ecdfde822625317f36b6 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/5169f8b89d20bef8d5b6c55364b25d065d53bb11 | microblazeel | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/1113e978d47958d2bb70a404d64b0bedf4b36060 | sh4aeb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/268d13d6afd4f802105d37561e3849834c3d737c | sparc | olsr-0.9.8 | NOK | http://autobuild.buildroot.net/results/d32e533755e727f33cf88094238f7c21fa25a6f6 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/cd065800b2a48e70b534fe280ea5c8ff37051c19 | ORPH mips64 | openblas-0.3.21 | NOK | http://autobuild.buildroot.net/results/a18061de5e37a2847b54564166ad223493766405 | ORPH m68k | openssh-9.0p1 | NOK | http://autobuild.buildroot.net/results/cd9a1c2d6b9fdb0e3407713d474d2d70150af53a | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/c6407cdd0e3c9db04154433da992a7f28a1967aa | ORPH riscv64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f49920cb3cbd3c59d46c735829dda9f70da9a4cb | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/244e50b7bbe46f794aa1c9c2636bc1652df5d6c7 | ORPH aarch64 | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/a84d5915d68da7b121337f2a48de93e91ccefe30 | ORPH aarch64_be | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/49d009f6c9a0302245112aed7e4a0a450a2213c9 | ORPH microblaze | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/39b9b251af52d3cfa1a3a0b4e21dbacc901f4f2e | arceb | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/df7edeacf34240a7720227e51768c5b21ee17200 | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/8df68addb47312f52b77f12aa78c64b09bfe3e3a | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/bb54b049e6e32308af1af0d3703216063b7c3ae8 | arceb | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/d9470b23f3a0114219d53e6fd054bce8bf7f371c | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/1acd9f2a69c28ec0e057820fa8012d520f9ad72b | ORPH microblazeel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/aa660503c5c96cbc2cb9bffbda02ea2a18fcc032 | ORPH aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/eef39a39593d61462f7d5694c55eb6b33fc0d115 | ORPH arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3e52f67ae2c91d80c54323a394114df8c8dc1748 | ORPH mipsel | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/8717b403fbd33c6b94791412da37731aa7e6a58c | ORPH aarch64_be | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/0db271dbc220bea72e9b71746b00bc53ad2e2801 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/66a6d57ec41ee374a8bd8107bc323ba21f18bd43 | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c8291834c2b65be331f84ada14320411cfb6bffd | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/192605cd5f711903d1ccaf7fef0be81abdf96041 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/8a4f1ca1008f28c6abbbb3eb1fb4586eeb1eb9ff | ORPH sh4 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fc6879b975c8d61dc4e7604465bd01edf19e0469 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b155cc847b1f1de8b131421fd4313fee61591e93 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3e32408af2ae113fb138a6b1a1460c823ab6fb73 | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/be1cc2bd1902e83b335b5dc839e77f634616f6e0 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c503d6a583adb52df08e9cf7bc6e76e6bb57c3a7 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9791781958b6fda79dc8125a7be709cf3dc326dc | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3160daa03a5d6d22f73aacc5e5a3bcb8c106db96 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/016f8abde2f45c8906f48c73280ead854a18870b | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/51820d61b5d09d6ea53026b921dbb0735f211033 | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c322e9d20a3b903155484c14e3ca88c030b2d865 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/98fdd7a9214f5f3d8e4a8aa5a1329a210c90d620 | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d8ee1f40f16afc6469d62c7d763ab1bb6ceb3411 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fa2f1e928109d724fce6733b7ebef9ff81f51eec | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/fb9ce0ea8a1f6af993ad53419b5e651da829f95b | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3eec63ffec93b8975cb666076c3eb83bea608710 | ORPH mips64el | snmppp-3.4.10 | NOK | http://autobuild.buildroot.net/results/36b08dba6a07a2d19bf5342488693926e6f98298 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e63421b88e9f87790e33b463ba7e1eb6b2ba4580 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/77680bfbe4ef98747ca7cb7c5ae905c047ab2b25 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/34f8d3051fce3c7f1f28a8581d27dcf497f56343 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/18ec1545dbf0a1f51dd461c6f87c9ca9c0e5a082 | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cb69c1798eb918b9aa416f8d91e592e75a3683f8 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8458751076b39a082553f327ab8cac46dd114fc5 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/abb58e710e1d0c5e4d5685fa9d40469472511b84 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/198212e1a7eac34b0b13d8e3e5b71f216fa0a4c3 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/6e84dde8f2a722d8ff7ef9b05db16553fcf7b90e | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/d39155496a6987f4ecebbc0d8311620e3572cd03 | ORPH or1k | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b01f7783d1dd8183c366a3a82c29aeb2cf495bf7 | sh4 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/02910480e5d77e41fc52ff5187330d3b433643b2 | mipsel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/76d84a872763bec1b22f53edf313c1d4ca6d4aa1 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/f539a054cd3185b0dd317385b953e99773304f88 | m68k | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/ee9e41badcf38ce27a6faa03e887c195deb93105 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/6896eefe0969f9d6c86a67aa4c71226169ced990 | microblaze | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/74086b201fb37ea0fe02e55a591186958788090e | sparc | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/e8b7df25a4e2fead771589a2debb103f2acbda41 | xtensa | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/aa1ac30dd2e251dc2b8026673bad2eb7e029de06 | mips64el | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/263021ac00e642282f9e52938c30d301d42de875 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/e3b6677f597f3c26444877809423aa3ff4f3d63f | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/41c19f599afd7bb0136c17af245afcaa59e333d1 | ORPH mips | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/307faeb443c32458958d80ff61d8d81f86a5707d | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/a70941a903123bb25fed5ca03cf0d6ecdc21d0ba | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 2 libcamera-1966b9a58436fab51... | 1 wavemon-0.9.4 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3c2e02d880ab7281f4c6d8aa085a216f802847ff | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/75b8d182b6d3b76bc42a062af546201304d4021e | riscv64 | libcamera-1966b9a58436fab51... | NOK | http://autobuild.buildroot.net/results/8bfe32a0eb2f259b3db95b5296403c76c2982013 | mips | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/44ca9ef3fa90b80ff092075038d3ba61f2f10a91 | ORPH mipsel | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/57991d6cd1356e3b96aacbb88c3e3a3200c7964f | Classification of failures by reason for 2022.08.x -------------------------------------------------- acpid-2.0.33 | 1 dieharder-3.31.1 | 1 gmp-6.2.1 | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 libcurl-7.84.0 | 1 make: *** wait: No child pr... | 1 unknown | 1 vdr-2.6.1 | 1 wolfssl-5.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/2b6115c6d6992d250042b0f1f8d2defa02436c0c | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5602ccafa1c1e4077cc6298b425d83449cd03920 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/aae7d44f7f591ab419eded5856982d5b7ec80a03 | ORPH mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/88a95af1f6ff81c574d1809ad3f90502320bab33 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/82fadcdf2724e330dfe12a8528411b66155d1f3b | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/331e1b69412b2e553a43f19c0852a458065f03d1 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/99e9dc159ea2d093341f48c027b1d1ebd95ce088 | mips64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/1b44fa52b1dd77d9930c09ddbbe87fcc89b1d0fb | arm | unknown | NOK | http://autobuild.buildroot.net/results/eb3a48d1d13df10e5cf6bba75416b3939dbbbdba | arm | vdr-2.6.1 | NOK | http://autobuild.buildroot.net/results/9bace99025e77d88d47b9f43d0d54f64226ed4cf | arm | wolfssl-5.5.0 | NOK | http://autobuild.buildroot.net/results/9fec4c6a918a590ac02781d60873f1dc73fbc04f | Gitlab CI results for 2022-10-14 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035122 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035129 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035151 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035153 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035155 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035158 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035161 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035163 | avenger96 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035164 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035165 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035166 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035167 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035171 | freescale_imx8mnevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035204 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035212 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035213 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035214 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035215 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035217 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035219 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035220 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035222 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035223 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035242 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035274 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035279 | ls1028ardb | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035296 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035298 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035301 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035304 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035307 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035310 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035312 | nezha | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035324 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035328 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035330 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035331 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035332 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035358 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035363 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035366 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035372 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035374 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035377 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035379 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035389 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035391 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035392 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035393 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035400 | qemu_riscv64_nommu_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035431 | qemu_riscv64_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035432 | qemu_s390x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035433 | qemu_sh4_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035434 | qemu_sh4eb_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035435 | qemu_sparc64_sun4u | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035437 | qemu_sparc_ss10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035439 | qemu_x86 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035442 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035441 | qemu_xtensa_lx60 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035444 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035445 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035458 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035446 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035448 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035451 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035453 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035452 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035454 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035456 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035455 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035460 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035459 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035462 | riotboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035463 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035465 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035467 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035468 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035469 | rock_pi_n8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035470 | rockpro64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035471 | roseapplepi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035473 | s6lx9_microboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035474 | sheevaplug | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035475 | sipeed_maix_bit | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035477 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035478 | sipeed_maix_dock | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035481 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035482 | sipeed_maix_go | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035483 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035485 | sipeed_maixduino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035486 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035487 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035488 | snps_archs38_axs103 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035489 | snps_archs38_haps | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035490 | snps_archs38_hsdk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035491 | socrates_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035492 | solidrun_clearfog | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035493 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035494 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035496 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035497 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035498 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035499 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035500 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035503 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035504 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035505 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035507 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035508 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035509 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035510 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035512 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035513 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035515 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035516 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035518 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035522 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035523 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035525 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035529 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035531 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035534 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3166035535 | -- http://autobuild.buildroot.net From huth at tuxfamily.org Sat Oct 15 06:04:11 2022 From: huth at tuxfamily.org (Thomas Huth) Date: Sat, 15 Oct 2022 08:04:11 +0200 Subject: [Buildroot] [PATCH] package/frotz: Add a missing dependency to the Makefile to fix build problems Message-ID: <20221015060411.326933-1-huth@tuxfamily.org> There are currently some build jobs failing where blorblib is built before hash.h has been created. This patch should hopefully fix these issues. Signed-off-by: Thomas Huth --- See e.g. here for a failed build: http://autobuild.buildroot.net/results/9cd213ce2d36f797041c7b21044c2b2c223dd546/build-end.log ...0001-Makefile-blorb-lib-needs-hash.h.patch | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch diff --git a/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch b/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch new file mode 100644 index 0000000000..3bde10b6ba --- /dev/null +++ b/package/frotz/0001-Makefile-blorb-lib-needs-hash.h.patch @@ -0,0 +1,40 @@ +From cdf0ad4aff2d8937034e02e41a5aadcca320ea18 Mon Sep 17 00:00:00 2001 +From: Thomas Huth +Date: Fri, 14 Oct 2022 20:29:41 +0200 +Subject: [PATCH] Makefile: blorb-lib needs hash.h + +If running "make blorb-lib" on a vanilla source directory, the +compilation fails with: + + make -C src/blorb + make[1]: Entering directory '/home/thomas/src/frotz/src/blorb' + cc -Wall -std=c99 -O3 -g -D_POSIX_C_SOURCE=200809L -I../common -fPIC + -fpic -o blorblib.o -c blorblib.c + In file included from blorblib.c:11: + ../common/frotz.h:74:10: fatal error: hash.h: No such file or directory + 74 | #include "hash.h" + | ^~~~~~~~ + compilation terminated. + +Looks like we also have to make sure that hash.h is in place before +compiling the blorb target, thus add the dependency to the Makefile. +--- + Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 1d27b09..3d2bc45 100644 +--- a/Makefile ++++ b/Makefile +@@ -461,7 +461,7 @@ $(SDL_LIB): $(COMMON_DEFINES) $(HASH) $(SDL_DIR) + $(DUMB_LIB): $(COMMON_DEFINES) $(HASH) + $(MAKE) -C $(DUMB_DIR) + +-$(BLORB_LIB): $(COMMON_DEFINES) ++$(BLORB_LIB): $(COMMON_DEFINES) $(HASH) + $(MAKE) -C $(BLORB_DIR) + + $(SUB_CLEAN): +-- +2.37.3 + -- 2.37.3 From jesseevg at gmail.com Sat Oct 15 08:11:22 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Sat, 15 Oct 2022 10:11:22 +0200 Subject: [Buildroot] Changing configuration options of package in another one In-Reply-To: References: Message-ID: On Fri, Oct 14, 2022, 14:48 Quentin Schulz < quentin.schulz at theobroma-systems.com> wrote: > Hi Jesse, > > On 10/13/22 15:06, Jesse Van Gavere wrote: > > Hello, > > > > I'm in a bit of a peculiar situation for which I'm not sure what the > > correct solution is. > > I'm trying to implement the qt6 remote objects package, this has a > > dependency on host-qt6remoteobjects because it needs a host tool from > > it to build the target package, however, to build the host package it > > needs qt6base network enabled in the host qt6 build, this is by > > default turned off as it's not a necessity for the host tools needed > > to build the target package. > > > > So to make it work I've added an enable for the network module to > > HOST_QT6BASE_CONF_OPTS but this seems like a bit of a dirty solution, > > what should I do here? Manipulate the qt6 host build it in the remote > > objects package? Or maybe turn on the network module for the qt6 host > > build whenever the target qt6 network module gets enabled? > > > > Not sure I have entirely understood the issue but here's a try anyways :) > > I would add a build option to the host qt6 for network support in > Kconfig, then have your remote objects package depends on this option > being selected. If it's not selected, your package won't be selected > either, which is what is desired I think? > > Cheers, > Quentin Hello Quentin, Thank you, that might work yes, I think I could make it a "hidden" kconfig option in the qt6 package which is then selected by the remote objects package, I'll implement it that way and see how the reception to it is. Thanks! Regards, Jesse -------------- next part -------------- An HTML attachment was scrubbed... URL: From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:54 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:54 +0800 Subject: [Buildroot] [0/3] package/libkcapi: bump version to 1.4.0 and add Kconfigs Message-ID: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> This series is to: - bump version to latest version 1.4.0 - add Kconfig option for building kcapi-dgst - add Kconfig options for enabling lib-asym and lib-kpp Tan En De (3): package/libkcapi: bump version to 1.4.0 package/libkcapi: support building kcapi-dgst application package/libkcapi: support enabling lib-asym and lib-kpp ...f-__NR_io_getevents-when-not-defined.patch | 42 ------------------- package/libkcapi/Config.in | 9 ++++ package/libkcapi/libkcapi.hash | 4 +- package/libkcapi/libkcapi.mk | 20 ++++++++- 4 files changed, 30 insertions(+), 45 deletions(-) delete mode 100644 package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:56 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:56 +0800 Subject: [Buildroot] [2/3] package/libkcapi: support building kcapi-dgst application In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-3-ende.tan@linux.starfivetech.com> Just add a new Kconfig option in order to support building kcapi-dgst application. Signed-off-by: Tan En De --- package/libkcapi/Config.in | 3 +++ package/libkcapi/libkcapi.mk | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8243f6b738..176767e338 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -28,4 +28,7 @@ config BR2_PACKAGE_LIBKCAPI_TEST bool "build test program" depends on BR2_USE_MMU # fork() +config BR2_PACKAGE_LIBKCAPI_DGSTAPP + bool "build dgst application" + endif diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 30d500696b..214999ddd2 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -47,4 +47,10 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-test endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) +LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp +else +LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp +endif + $(eval $(autotools-package)) -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:57 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:57 +0800 Subject: [Buildroot] [3/3] package/libkcapi: support enabling lib-asym and lib-kpp In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-4-ende.tan@linux.starfivetech.com> Add Kconfig options to allow enabling asymmetric cipher support (--enable-lib-asym) and key protocol primitives support (--enable-lib-kpp) in library. Signed-off-by: Tan En De --- package/libkcapi/Config.in | 6 ++++++ package/libkcapi/libkcapi.mk | 12 ++++++++++++ 2 files changed, 18 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 176767e338..97eda31a4e 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -31,4 +31,10 @@ config BR2_PACKAGE_LIBKCAPI_TEST config BR2_PACKAGE_LIBKCAPI_DGSTAPP bool "build dgst application" +config BR2_PACKAGE_LIBKCAPI_ASYM + bool "enable asymmetric ciphers library functions (kernel patching required)" + +config BR2_PACKAGE_LIBKCAPI_KPP + bool "enable KPP library functions (kernel patching required)" + endif diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 214999ddd2..c3b655bb35 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -53,4 +53,16 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_ASYM),y) +LIBKCAPI_CONF_OPTS += --enable-lib-asym +else +LIBKCAPI_CONF_OPTS += --disable-lib-asym +endif + +ifeq ($(BR2_PACKAGE_LIBKCAPI_KPP),y) +LIBKCAPI_CONF_OPTS += --enable-lib-kpp +else +LIBKCAPI_CONF_OPTS += --disable-lib-kpp +endif + $(eval $(autotools-package)) -- 2.34.1 From ende.tan at linux.starfivetech.com Sat Oct 15 08:47:55 2022 From: ende.tan at linux.starfivetech.com (Tan En De) Date: Sat, 15 Oct 2022 16:47:55 +0800 Subject: [Buildroot] [1/3] package/libkcapi: bump version to 1.4.0 In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221015084757.277050-2-ende.tan@linux.starfivetech.com> Removed patch applied upstream: https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923 Signed-off-by: Tan En De --- ...f-__NR_io_getevents-when-not-defined.patch | 42 ------------------- package/libkcapi/libkcapi.hash | 4 +- package/libkcapi/libkcapi.mk | 2 +- 3 files changed, 3 insertions(+), 45 deletions(-) delete mode 100644 package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch diff --git a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch b/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch deleted file mode 100644 index 20aa75b741..0000000000 --- a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 455c4938f5822c017c7ff79dd2dca638b6410923 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Sun, 15 Nov 2020 18:05:48 -0800 -Subject: [PATCH] Disable use of __NR_io_getevents when not defined - -Architectures like riscv32 do not define this syscall, therefore return -ENOSYS on such architectures - -Upstream-Status: Pending -Signed-off-by: Khem Raj -Signed-off-by: Stephan Mueller -[Retrieved from: -https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923] -Signed-off-by: Fabrice Fontaine ---- - lib/internal.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/lib/internal.h b/lib/internal.h -index 1237827..f765461 100644 ---- a/lib/internal.h -+++ b/lib/internal.h -@@ -325,10 +325,17 @@ static inline int io_submit(aio_context_t ctx, long n, struct iocb **iocb) - return syscall(__NR_io_submit, ctx, n, iocb); - } - --static inline int io_getevents(aio_context_t ctx, long min, long max, -- struct io_event *events, struct timespec *timeout) -+static inline int io_getevents(__attribute__((unused)) aio_context_t ctx, -+ __attribute__((unused)) long min, -+ __attribute__((unused)) long max, -+ __attribute__((unused)) struct io_event *events, -+ __attribute__((unused)) struct timespec *timeout) - { -+#ifdef __NR_io_getevents - return syscall(__NR_io_getevents, ctx, min, max, events, timeout); -+#else -+ return -ENOSYS; -+#endif - } - - /************************************************************ diff --git a/package/libkcapi/libkcapi.hash b/package/libkcapi/libkcapi.hash index 49b0880211..d858086408 100644 --- a/package/libkcapi/libkcapi.hash +++ b/package/libkcapi/libkcapi.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 8a08dcbb4d05ede4357cdc9d61c7f2a7f2cd96b7ce2eb41b28e45b2e378267ad libkcapi-1.1.5.tar.xz -sha256 c6b8402a68999b0f84560ab43cdf60f9ff33c4a9a8ced6a40db9d3b787ba5b4a COPYING +sha256 644b47593b3f27f08add7a8808ccdbe569a2f331d70fb8b52551e57379b917fa libkcapi-1.4.0.tar.xz +sha256 9765fad61726afb2b253db2c68153672e4178d6809667ae98141f3e90fe8645b COPYING sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING.gplv2 sha256 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239 COPYING.bsd diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 09c5c028bc..30d500696b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBKCAPI_VERSION = 1.1.5 +LIBKCAPI_VERSION = 1.4.0 LIBKCAPI_SOURCE = libkcapi-$(LIBKCAPI_VERSION).tar.xz LIBKCAPI_SITE = http://www.chronox.de/libkcapi LIBKCAPI_AUTORECONF = YES -- 2.34.1 From peter at korsgaard.com Sat Oct 15 12:44:38 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:44:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/uhd: drop have_mfpu_neon In-Reply-To: <20220925123948.264951-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 25 Sep 2022 14:39:48 +0200") References: <20220925123948.264951-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjpjlxl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop have_mfpu_neon which has been added by commit > b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: > CMake Warning: > Manually-specified variables were not used by the project: > BUILD_DOC > BUILD_DOCS > BUILD_EXAMPLE > BUILD_EXAMPLES > BUILD_TEST > BUILD_TESTING > BUILD_TESTS > CMAKE_INSTALL_RUNSTATEDIR > have_mfpu_neon > Signed-off-by: Fabrice Fontaine Committed to 2022.02.x and 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:46:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:46:42 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: remove Joerg Krause In-Reply-To: <20220928070417.3C6D386402@busybox.osuosl.org> (Thomas Petazzoni's message of "Wed, 28 Sep 2022 09:03:57 +0200") References: <20220928070417.3C6D386402@busybox.osuosl.org> Message-ID: <87o7udjlu5.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni writes: > commit: https://git.buildroot.net/buildroot/commit/?id=c6b987f39ddd2abbce526021ccb39bd42e50fa23 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > His e-mail server is no longer responsive. Every single day, we get: > : connect to embedded.rocks[99.83.154.118]:25: > Connection timed out > when sending the daily autobuilder report. > Signed-off-by: Thomas Petazzoni > --- Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:49:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:49:05 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: remove Nicolas Tran In-Reply-To: <20220928070417.46BB486409@busybox.osuosl.org> (Thomas Petazzoni via buildroot's message of "Wed, 28 Sep 2022 09:04:00 +0200") References: <20220928070417.46BB486409@busybox.osuosl.org> Message-ID: <87k051jlq6.fsf@dell.be.48ers.dk> >>>>> "Thomas" == Thomas Petazzoni via buildroot writes: > commit: https://git.buildroot.net/buildroot/commit/?id=e4ecf82f99f53e55d51e6f74ae5021473aa2bb1d > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Nicolas Tran is apparently no longer at Smile: > The response from the remote server was: > 450 4.1.1 : Recipient address rejected: User unknown in virtual mailbox table > Signed-off-by: Thomas Petazzoni Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 12:45:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:45:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] DEVELOPERS: remove Joerg Krause Message-ID: <20221015124918.1CDB8864DF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a6e5b67d7c46325ea14447e3f9237514386a345e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x His e-mail server is no longer responsive. Every single day, we get: : connect to embedded.rocks[99.83.154.118]:25: Connection timed out when sending the daily autobuilder report. Signed-off-by: Thomas Petazzoni (cherry picked from commit c6b987f39ddd2abbce526021ccb39bd42e50fa23) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index af21b8bdd0..c7d408dab7 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1567,23 +1567,6 @@ N: Joris Offouga F: package/python-colorlog/ F: package/python-simplelogging/ -N: J??rg Krause -F: board/lemaker/bananapro/ -F: configs/bananapro_defconfig -F: package/augeas/ -F: package/bluez-alsa/ -F: package/caps/ -F: package/freescale-imx/imx-alsa-plugins/ -F: package/libopusenc/ -F: package/libupnpp/ -F: package/luv/ -F: package/luvi/ -F: package/mpd/ -F: package/shairport-sync/ -F: package/swupdate/ -F: package/upmpdcli/ -F: package/wavemon/ - N: Joris Lijssens F: package/emlog/ F: package/libcoap/ From peter at korsgaard.com Sat Oct 15 12:48:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:48:55 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] DEVELOPERS: remove Nicolas Tran Message-ID: <20221015124918.27949864E0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c45cbea560280327a4667d166e8f0cd709a4c55d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Nicolas Tran is apparently no longer at Smile: The response from the remote server was: 450 4.1.1 : Recipient address rejected: User unknown in virtual mailbox table Signed-off-by: Thomas Petazzoni (cherry picked from commit e4ecf82f99f53e55d51e6f74ae5021473aa2bb1d) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 4 ---- 1 file changed, 4 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index c7d408dab7..81f33fe117 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2210,10 +2210,6 @@ N: Nicolas Serafini F: package/exiv2/ F: package/ofono/ -N: Nicolas Tran -F: package/dust/ -F: package/hyperfine/ - N: Niklas Cassel F: configs/qemu_riscv64_nommu_virt_defconfig From peter at korsgaard.com Sat Oct 15 12:44:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:44:06 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/uhd: drop have_mfpu_neon Message-ID: <20221015124918.12165864DA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=678bf71778b102bcb88a5d2802ad8bf43d16fe16 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Drop have_mfpu_neon which has been added by commit b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR have_mfpu_neon Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit 27f6c1ab383ce27236d75526ea881d7c789331a4) Signed-off-by: Peter Korsgaard --- package/uhd/uhd.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/uhd/uhd.mk b/package/uhd/uhd.mk index e8f197f9dd..2a5b69cefb 100644 --- a/package/uhd/uhd.mk +++ b/package/uhd/uhd.mk @@ -36,7 +36,6 @@ ifeq ($(BR2_ARM_CPU_HAS_NEON),y) UHD_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) -mfpu=neon" UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=ON else -UHD_CONF_OPTS += -Dhave_mfpu_neon=0 UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=OFF endif From peter at korsgaard.com Sat Oct 15 12:43:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:43:57 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/uhd: drop have_mfpu_neon Message-ID: <20221015125023.33DF286631@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0fed79d6c7f3d1027da7801926758b4ba57b693e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Drop have_mfpu_neon which has been added by commit b07de37540ee34e4e5fa8586ecc40da1586cd940 but is not recognized: CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR have_mfpu_neon Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit 27f6c1ab383ce27236d75526ea881d7c789331a4) Signed-off-by: Peter Korsgaard --- package/uhd/uhd.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/package/uhd/uhd.mk b/package/uhd/uhd.mk index e8f197f9dd..2a5b69cefb 100644 --- a/package/uhd/uhd.mk +++ b/package/uhd/uhd.mk @@ -36,7 +36,6 @@ ifeq ($(BR2_ARM_CPU_HAS_NEON),y) UHD_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) -mfpu=neon" UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=ON else -UHD_CONF_OPTS += -Dhave_mfpu_neon=0 UHD_CONF_OPTS += -DNEON_SIMD_ENABLE=OFF endif From peter at korsgaard.com Sat Oct 15 12:46:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:46:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] DEVELOPERS: remove Joerg Krause Message-ID: <20221015125023.496008669C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=75368d47446534a1cd8f0d932882f61df9d35eb3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x His e-mail server is no longer responsive. Every single day, we get: : connect to embedded.rocks[99.83.154.118]:25: Connection timed out when sending the daily autobuilder report. Signed-off-by: Thomas Petazzoni (cherry picked from commit c6b987f39ddd2abbce526021ccb39bd42e50fa23) Signed-off-by: Peter Korsgaard --- DEVELOPERS | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/DEVELOPERS b/DEVELOPERS index 55e81be072..91707bbc4a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1502,23 +1502,6 @@ N: Joris Offouga F: package/python-colorlog/ F: package/python-simplelogging/ -N: J??rg Krause -F: board/lemaker/bananapro/ -F: configs/bananapro_defconfig -F: package/augeas/ -F: package/bluez-alsa/ -F: package/caps/ -F: package/freescale-imx/imx-alsa-plugins/ -F: package/libopusenc/ -F: package/libupnpp/ -F: package/luv/ -F: package/luvi/ -F: package/mpd/ -F: package/shairport-sync/ -F: package/swupdate/ -F: package/upmpdcli/ -F: package/wavemon/ - N: Joris Lijssens F: package/emlog/ F: package/libcoap/ From peter at korsgaard.com Sat Oct 15 13:01:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:01:21 +0200 Subject: [Buildroot] [PATCH] package/rtl8189es: fix build failure due to wrong endianness In-Reply-To: <20220928192802.437811-1-giulio.benetti@benettiengineering.com> (Giulio Benetti's message of "Wed, 28 Sep 2022 21:28:02 +0200") References: <20220928192802.437811-1-giulio.benetti@benettiengineering.com> Message-ID: <87fsfpjl5q.fsf@dell.be.48ers.dk> >>>>> "Giulio" == Giulio Benetti writes: > At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and > there is no way to override it. So to do this let's add a patch that is > pending upstream[1] to allow to override CFLAGS and then let's undefine > CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk > Fixes: > http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ > [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 > Signed-off-by: Giulio Benetti Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 13:05:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:05:27 +0200 Subject: [Buildroot] [git commit] package/gitlab-runner: fix forcing openssl In-Reply-To: <20221001162812.C44078640A@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 18:27:24 +0200") References: <20221001162812.C44078640A@busybox.osuosl.org> Message-ID: <87bkqdjkyw.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=60f97ad95ad2ec93effed8a41e7d2e6101cd6917 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as > it is part of a choice. Instead, we have a symbol explicitly to force > libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. > Use that. > Reported-by: Yann E. MORIN > Signed-off-by: Giulio Benetti > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 13:04:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:04:27 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/gitlab-runner: fix forcing openssl Message-ID: <20221015130603.11BD5866F7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9c214f41cc34276e1eac35153be539614d0b938 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as it is part of a choice. Instead, we have a symbol explicitly to force libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL. Use that. Reported-by: Yann E. MORIN Signed-off-by: Giulio Benetti Signed-off-by: Yann E. MORIN (cherry picked from commit 60f97ad95ad2ec93effed8a41e7d2e6101cd6917) Signed-off-by: Peter Korsgaard --- package/gitlab-runner/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 72c2742562..89e3e87b5c 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -13,7 +13,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_LIBCURL_CURL # runtime select BR2_PACKAGE_LIBCURL_OPENSSL # runtime, for ca-certificates. select BR2_PACKAGE_OPENSSL # runtime - select BR2_PACKAGE_LIBOPENSSL # runtime + select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime help From peter at korsgaard.com Sat Oct 15 12:56:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 14:56:19 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/rtl8189es: fix build failure due to wrong endianness Message-ID: <20221015130603.07032866F5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c7531673a0f8026574e797cd6d43251bca48dfa8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and there is no way to override it. So to do this let's add a patch that is pending upstream[1] to allow to override CFLAGS and then let's undefine CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk Fixes: http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 79a1c5dcadc97f3dad6d95bea2184a92f991bb04) Signed-off-by: Peter Korsgaard --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ package/rtl8189es/rtl8189es.mk | 8 ++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189es/rtl8189es.mk b/package/rtl8189es/rtl8189es.mk index 2fa6a3a483..cddcb195f9 100644 --- a/package/rtl8189es/rtl8189es.mk +++ b/package/rtl8189es/rtl8189es.mk @@ -8,10 +8,16 @@ RTL8189ES_VERSION = 39c17661136da48f8e9c644194dce6a7f5076896 RTL8189ES_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189ES_VERSION)) RTL8189ES_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189ES_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189ES_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189ES_MODULE_MAKE_OPTS = \ CONFIG_RTL8189ES=m \ KVER=$(LINUX_VERSION_PROBED) \ - KSRC=$(LINUX_DIR) + KSRC=$(LINUX_DIR) \ + USER_EXTRA_CFLAGS="$(RTL8189ES_USER_EXTRA_CLAGS)" define RTL8189ES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_NET) From peter at korsgaard.com Sat Oct 15 13:01:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 15:01:09 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/rtl8189es: fix build failure due to wrong endianness Message-ID: <20221015130708.ACFAC866FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b8b8214f262d218d219e6bb190c45fb669fbe00 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x At the moment rtl8189es module has -DCONFIG_LITTLE_ENDIAN hardcoded and there is no way to override it. So to do this let's add a patch that is pending upstream[1] to allow to override CFLAGS and then let's undefine CONFIG_LITTLE_ENDIAN and define the correct endianness in rtl8189es.mk Fixes: http://autobuild.buildroot.net/results/3bcad5e88876c86a2a3338961ed20f28b5953779/ [1]: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83 Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni (cherry picked from commit 79a1c5dcadc97f3dad6d95bea2184a92f991bb04) Signed-off-by: Peter Korsgaard --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ package/rtl8189es/rtl8189es.mk | 8 ++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189es/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189es/rtl8189es.mk b/package/rtl8189es/rtl8189es.mk index 2fa6a3a483..cddcb195f9 100644 --- a/package/rtl8189es/rtl8189es.mk +++ b/package/rtl8189es/rtl8189es.mk @@ -8,10 +8,16 @@ RTL8189ES_VERSION = 39c17661136da48f8e9c644194dce6a7f5076896 RTL8189ES_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189ES_VERSION)) RTL8189ES_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189ES_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189ES_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189ES_MODULE_MAKE_OPTS = \ CONFIG_RTL8189ES=m \ KVER=$(LINUX_VERSION_PROBED) \ - KSRC=$(LINUX_DIR) + KSRC=$(LINUX_DIR) \ + USER_EXTRA_CFLAGS="$(RTL8189ES_USER_EXTRA_CLAGS)" define RTL8189ES_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_NET) From angelo at amarulasolutions.com Sat Oct 15 14:26:01 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sat, 15 Oct 2022 16:26:01 +0200 Subject: [Buildroot] [PATCH] package/cutekeyboard: new package Message-ID: <20221015142601.4155681-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 40 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..3c5621f76a --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..3d3ec2f858 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 8cbaddc5fbf479d5e20fc88228e9af5928fa5e588052ee496c2f2efbe2afc510 cutekeyboard-afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..3e4c08f44e --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# qt5virtualkeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.25.1 From peter at korsgaard.com Sat Oct 15 14:27:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:27:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.1 In-Reply-To: <20220928213631.14450-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 28 Sep 2022 23:36:31 +0200") References: <20220928213631.14450-1-fontaine.fabrice@gmail.com> Message-ID: <877d11jh5y.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service attack and buffer overflow against TLS 1.3 > servers using session ticket resumption. When built with > --enable-session-ticket and making use of TLS 1.3 server code in > wolfSSL, there is the possibility of a malicious client to craft a > malformed second ClientHello packet that causes the server to crash. > This issue is limited to when using both --enable-session-ticket and TLS > 1.3 on the server side. Users with TLS 1.3 servers, and having > --enable-session-ticket, should update to the latest version of wolfSSL. > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:28:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/dnsmasq: security bump to version 2.87 In-Reply-To: <20220927184401.12423-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Tue, 27 Sep 2022 20:44:01 +0200") References: <20220927184401.12423-1-fontaine.fabrice@gmail.com> Message-ID: <8735bpjh3v.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-0934: > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html > - Drop patches (already in version) > - Update hash of COPYING, slight updates: > https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 > https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:26:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:26:27 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221015142902.29F4C867FF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4cd106188a876163d5c056ec3c6e9bae0df8e0bb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 2e4c0e722f4d9494c2451458a42d4c4f8ef006ab) Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 14:28:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:33 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/dnsmasq: security bump to version 2.87 Message-ID: <20221015142902.33EC686808@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=47572329d8156ffbd9fffba7c446b577ffb9dfff branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 22d6788619b17ebbe90eeccf7d754a45ab10c05a) Signed-off-by: Peter Korsgaard --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From peter at korsgaard.com Sat Oct 15 14:26:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:26:40 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/wolfssl: security bump to version 5.5.1 Message-ID: <20221015143014.C7CF286ADE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7e4e084ad663d179d5d48141f01d5579dde16a0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 2e4c0e722f4d9494c2451458a42d4c4f8ef006ab) Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index f1401e4cda..3849ffb9fc 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c34b74b5f689fac7becb05583b044e84d3b10d39f38709f0095dd5d423ded67f wolfssl-5.5.0.tar.gz +sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index ca360312c9..95d4f47952 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.0 +WOLFSSL_VERSION = 5.5.1 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 14:28:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:28:29 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/dnsmasq: security bump to version 2.87 Message-ID: <20221015143014.D5377866F8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=52340cee491ad5996411a557e9e2f8acd7f83b0d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix CVE-2022-0934: https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q1/016274.html - Drop patches (already in version) - Update hash of COPYING, slight updates: https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=858bfcf261e12a0baf4de6dbbf3b8858bab7cc53 https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2022q3/016560.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN (cherry picked from commit 22d6788619b17ebbe90eeccf7d754a45ab10c05a) Signed-off-by: Peter Korsgaard --- .../0001-src-option.c-fix-build-with-gcc-4.8.patch | 52 -------------------- ...2909d9080ff8743133fbd52427b4b2213171-typo.patch | 36 -------------- ...S-but-not-DNSSEC-compile-options-selected.patch | 34 ------------- ...0004-src-pattern.c-fix-build-with-gcc-4.8.patch | 57 ---------------------- package/dnsmasq/dnsmasq.hash | 6 +-- package/dnsmasq/dnsmasq.mk | 2 +- 6 files changed, 4 insertions(+), 183 deletions(-) diff --git a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 50ecf2f18a..0000000000 --- a/package/dnsmasq/0001-src-option.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 46312909d9080ff8743133fbd52427b4b2213171 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 31 Dec 2021 17:29:44 +0100 -Subject: [PATCH] src/option.c: fix build with gcc 4.8 - -Fix the following build failure with gcc 4.8 raised since version 2.86: - -option.c: In function 'one_opt': -option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (char *p = arg; *p; p++) { - ^ -option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code -option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode - for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - ^ - -Fixes: - - http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84 - -Signed-off-by: Fabrice Fontaine -[Upstream commit 46312909d9080ff8743133fbd52427b4b2213171] ---- - src/option.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index ff54def..c57f6d8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -2525,7 +2525,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - arg += 9; - if (strlen(arg) != 16) - ret_err(gen_err); -- for (char *p = arg; *p; p++) { -+ char *p; -+ for (*p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } -@@ -2533,7 +2534,8 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - - u8 *u = daemon->umbrella_device; - char word[3]; -- for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { -+ u8 i; -+ for (i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) { - memcpy(word, &(arg[0]), 2); - *u++ = strtoul(word, NULL, 16); - } --- -2.33.0 - diff --git a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch b/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch deleted file mode 100644 index 8cdf5b3f1b..0000000000 --- a/package/dnsmasq/0002-Fix-46312909d9080ff8743133fbd52427b4b2213171-typo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2748fb81e23b71e2c44956e99321816aca91905d Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Sat, 1 Jan 2022 23:03:26 +0000 -Subject: [PATCH] Fix 46312909d9080ff8743133fbd52427b4b2213171 typo. - -[Upstream commit 2748fb81e23b71e2c44956e99321816aca91905d] -Signed-off-by: Fabrice Fontaine ---- - src/option.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/option.c b/src/option.c -index c57f6d8..6f56ce8 100644 ---- a/src/option.c -+++ b/src/option.c -@@ -357,7 +357,7 @@ static const struct myoption opts[] = - { "dhcp-ignore-clid", 0, 0, LOPT_IGNORE_CLID }, - { "dynamic-host", 1, 0, LOPT_DYNHOST }, - { "log-debug", 0, 0, LOPT_LOG_DEBUG }, -- { "umbrella", 2, 0, LOPT_UMBRELLA }, -+ { "umbrella", 2, 0, LOPT_UMBRELLA }, - { "quiet-tftp", 0, 0, LOPT_QUIET_TFTP }, - { NULL, 0, 0, 0 } - }; -@@ -2526,7 +2526,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma - if (strlen(arg) != 16) - ret_err(gen_err); - char *p; -- for (*p = arg; *p; p++) { -+ for (p = arg; *p; p++) { - if (!isxdigit((int)*p)) - ret_err(gen_err); - } --- -2.33.0 - diff --git a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch b/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch deleted file mode 100644 index 9c98af2be5..0000000000 --- a/package/dnsmasq/0003-Fix-FTBFS-when-CONNTRACK-and-UBUS-but-not-DNSSEC-compile-options-selected.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2c60441239e1c10c4987cb586653b1ea08f703c0 Mon Sep 17 00:00:00 2001 -From: Simon Kelley -Date: Tue, 28 Sep 2021 23:42:15 +0100 -Subject: [PATCH] Fix FTBFS when CONNTRACK and UBUS but not DNSSEC compile - options selected. - -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=2c60441239e1c10c4987cb586653b1ea08f703c0] -Signed-off-by: Fabrice Fontaine ---- - src/dnsmasq.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/src/dnsmasq.h b/src/dnsmasq.h -index c8a918a..3fdc1b0 100644 ---- a/src/dnsmasq.h -+++ b/src/dnsmasq.h -@@ -1173,9 +1173,12 @@ extern struct daemon { - char *packet; /* packet buffer */ - int packet_buff_sz; /* size of above */ - char *namebuff; /* MAXDNAME size buffer */ -+#if (defined(HAVE_CONNTRACK) && defined(HAVE_UBUS)) || defined(HAVE_DNSSEC) -+ /* CONNTRACK UBUS code uses this buffer, as well as DNSSEC code. */ -+ char *workspacename; -+#endif - #ifdef HAVE_DNSSEC - char *keyname; /* MAXDNAME size buffer */ -- char *workspacename; /* ditto */ - unsigned long *rr_status; /* ceiling in TTL from DNSSEC or zero for insecure */ - int rr_status_sz; - int dnssec_no_time_check; --- -2.20.1 - diff --git a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch b/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch deleted file mode 100644 index 90bb02b23a..0000000000 --- a/package/dnsmasq/0004-src-pattern.c-fix-build-with-gcc-4.8.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0c89dd2fa0fe50b00bca638dbbacfbd361526e0a Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 2 Jan 2022 21:57:52 +0100 -Subject: [PATCH] src/pattern.c: fix build with gcc 4.8 - -Fix the following build failure: - -pattern.c: In function 'is_valid_dns_name': -pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ -pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code -pattern.c: In function 'is_valid_dns_name_pattern': -pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode - for (const char *c = value;; c++) - ^ - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=b2690415bfa1bc105e61b75f642fb5c1aaf0fae8] ---- - src/pattern.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/src/pattern.c b/src/pattern.c -index 03e23b9..928d259 100644 ---- a/src/pattern.c -+++ b/src/pattern.c -@@ -129,9 +129,9 @@ int is_valid_dns_name(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '-' && *c != '.' && -@@ -242,11 +242,11 @@ int is_valid_dns_name_pattern(const char *value) - - size_t num_bytes = 0; - size_t num_labels = 0; -- const char *label = NULL; -+ const char *c, *label = NULL; - int is_label_numeric = 1; - size_t num_wildcards = 0; - int previous_label_has_wildcard = 1; -- for (const char *c = value;; c++) -+ for (c = value;; c++) - { - if (*c && - *c != '*' && /* Wildcard. */ --- -2.20.1 - diff --git a/package/dnsmasq/dnsmasq.hash b/package/dnsmasq/dnsmasq.hash index 804012821e..78127ca714 100644 --- a/package/dnsmasq/dnsmasq.hash +++ b/package/dnsmasq/dnsmasq.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.86.tar.xz.asc -sha256 28d52cfc9e2004ac4f85274f52b32e1647b4dbc9761b82e7de1e41c49907eb08 dnsmasq-2.86.tar.xz +# https://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.87.tar.xz.asc +sha256 0228c0364a7f2356fd7e7f1549937cbf3099a78d3b2eb1ba5bb0c31e2b89de7a dnsmasq-2.87.tar.xz # Locally calculated -sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING-v3 diff --git a/package/dnsmasq/dnsmasq.mk b/package/dnsmasq/dnsmasq.mk index 230e4a8116..46a40c4bbb 100644 --- a/package/dnsmasq/dnsmasq.mk +++ b/package/dnsmasq/dnsmasq.mk @@ -4,7 +4,7 @@ # ################################################################################ -DNSMASQ_VERSION = 2.86 +DNSMASQ_VERSION = 2.87 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" From peter at korsgaard.com Sat Oct 15 14:32:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:03 +0200 Subject: [Buildroot] [git commit] package/volk: fix licensing information In-Reply-To: <20221001213928.6B43A86743@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 23:35:46 +0200") References: <20221001213928.6B43A86743@busybox.osuosl.org> Message-ID: <87y1thi2e4.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=0a397fa6381a4115be22ee9637746bf8c8e1194e > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the > LGPL-3.0+, which is still not completely done 5by some large margin), so > it is still covered by the GPL-3.0+, but has parts already covered by > the LGPL-3.0+. > We so far only listed GPL-3.0+, but we also had the license file for the > LGPL-3.0+. > Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of > the GPL-3.0+, so we already had it listed (note: the package has a > COPYING-GPL, but i's a symlink to COPYING). > Signed-off-by: Gwenhael Goavec-Merou > [yann.morin.1998 at free.fr: > - split out to its own patch > - explain why we don't add COPYING-GPL > ] > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:32:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:42 +0200 Subject: [Buildroot] [git commit] package/volk: needs C++17, not boost In-Reply-To: <20221001213928.61BF486741@busybox.osuosl.org> (Yann E. MORIN's message of "Sat, 1 Oct 2022 23:15:58 +0200") References: <20221001213928.61BF486741@busybox.osuosl.org> Message-ID: <87tu45i2d1.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=66215faa5237e3704d55ff171537468079dda9c4 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Since volk 2.5.1, C++17 is required, and no Boost component is used > anymore. > Signed-off-by: Gwenhael Goavec-Merou > [yann.morin.1998 at free.fr: split out to its own patch] > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:33:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/volk: fix Config.in syntax error In-Reply-To: <20221001222254.142279-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 1 Oct 2022 16:22:54 -0600") References: <20221001222254.142279-1-james.hilliard1@gmail.com> Message-ID: <87pmeti2c6.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Fixes: > package/volk/Config.in:4: syntax error > package/volk/Config.in:3: invalid option > Signed-off-by: James Hilliard Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:33:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:24 +0200 Subject: [Buildroot] [git commit] package/volk: license list is comma-separated In-Reply-To: <20221002113701.4B6648677D@busybox.osuosl.org> (Yann E. MORIN's message of "Sun, 2 Oct 2022 13:35:59 +0200") References: <20221002113701.4B6648677D@busybox.osuosl.org> Message-ID: <87lephi2bv.fsf@dell.be.48ers.dk> >>>>> "Yann" == Yann E MORIN writes: > commit: https://git.buildroot.net/buildroot/commit/?id=ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70 > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > Reported-by: Thomas Petazzoni > Signed-off-by: Yann E. MORIN Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 14:32:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:53 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: fix Config.in syntax error Message-ID: <20221015143434.9BF2D86BF7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5db6d5f143b989495b54c0b5fb751fa355c0c300 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fixes: package/volk/Config.in:4: syntax error package/volk/Config.in:3: invalid option Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN (cherry picked from commit d395f49acf5222558601eb6d8300248bf7931051) Signed-off-by: Peter Korsgaard --- package/volk/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 83d58d64ab..6a343e0751 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,6 +1,6 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK From peter at korsgaard.com Sat Oct 15 14:32:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:32:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: license list is comma-separated Message-ID: <20221015143434.A9DE386BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=886f8df73158eaf71e55c9a10be7dec1f912419d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Reported-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN (cherry picked from commit ebc9beaa6af0bc27da8b9def4da758ac1bfbbf70) Signed-off-by: Peter Korsgaard --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 038b85ee86..ef18b69b3b 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ +VOLK_LICENSE = GPL-3.0+, LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 14:31:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:31:31 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: fix licensing information Message-ID: <20221015143434.8E1AE86BEA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=881d97d3e60773ad054f58847081e5bc5d2ad65e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the LGPL-3.0+, which is still not completely done by some large margin), so it is still covered by the GPL-3.0+, but has parts already covered by the LGPL-3.0+. We so far only listed GPL-3.0+, but we also had the license file for the LGPL-3.0+. Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of the GPL-3.0+, so we already had it listed (note: the package has a COPYING-GPL, but i's a symlink to COPYING). Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: - split out to its own patch - explain why we don't add COPYING-GPL ] Signed-off-by: Yann E. MORIN (cherry picked from commit 0a397fa6381a4115be22ee9637746bf8c8e1194e) Signed-off-by: Peter Korsgaard --- package/volk/volk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/volk/volk.mk b/package/volk/volk.mk index 1b36ea69c8..038b85ee86 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -9,7 +9,7 @@ VOLK_SITE = https://github.com/gnuradio/volk/releases/download/v$(VOLK_VERSION) VOLK_SOURCE = volk-$(VOLK_VERSION).tar.xz # See https://github.com/gnuradio/volk/tree/v2.5.1#license for some # details on the licensing. -VOLK_LICENSE = GPL-3.0+ +VOLK_LICENSE = GPL-3.0+ LGPL-3.0+ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 14:31:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:31:02 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/volk: needs C++17, not boost Message-ID: <20221015143434.8094486BE3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=207ffb044339bf063e2bd15c6863deb5c0edb2fa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since volk 2.5.1, C++17 is required, and no Boost component is used anymore. Signed-off-by: Gwenhael Goavec-Merou [yann.morin.1998 at free.fr: split out to its own patch] Signed-off-by: Yann E. MORIN (cherry picked from commit 66215faa5237e3704d55ff171537468079dda9c4) Signed-off-by: Peter Korsgaard --- package/volk/Config.in | 9 ++------- package/volk/volk.mk | 2 +- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/package/volk/Config.in b/package/volk/Config.in index 95b4a8bdb5..83d58d64ab 100644 --- a/package/volk/Config.in +++ b/package/volk/Config.in @@ -1,20 +1,15 @@ comment "volk needs a toolchain w/ C++, NPTL, wchar, dynamic library" depends on BR2_USE_MMU - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_7 \ !BR2_TOOLCHAIN_HAS_THREADS_NPTL || BR2_STATIC_LIBS config BR2_PACKAGE_VOLK bool "volk" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17 depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() - depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem - select BR2_PACKAGE_BOOST - select BR2_PACKAGE_BOOST_FILESYSTEM - select BR2_PACKAGE_BOOST_SYSTEM help VOLK is the Vector-Optimized Library of Kernels. It is a library that contains kernels of hand-written SIMD code diff --git a/package/volk/volk.mk b/package/volk/volk.mk index e7b004b87f..1b36ea69c8 100644 --- a/package/volk/volk.mk +++ b/package/volk/volk.mk @@ -15,7 +15,7 @@ VOLK_LICENSE_FILES = COPYING COPYING-LGPL VOLK_SUPPORTS_IN_SOURCE_BUILD = NO # host-python-mako are needed for volk to compile -VOLK_DEPENDENCIES = host-python3 host-python-mako boost +VOLK_DEPENDENCIES = host-python3 host-python-mako VOLK_CONF_OPTS = \ -DPYTHON_EXECUTABLE=$(HOST_DIR)/bin/python3 \ From peter at korsgaard.com Sat Oct 15 14:33:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:33:56 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] toolchain/Config.in: correct BR2_TOOLCHAIN_HEADERS_AT_LEAST for 5.17 Message-ID: <20221015143434.B659486BE3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5c6d67cfe144e7ee4f2f3fb3a311d67e0b6b7935 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Missed from commit 2b134f9549d ({toolchain, linux-headers}: add support for 5.17.x headers). Signed-off-by: Peter Korsgaard (cherry picked from commit 484b50507f31e90a3f955698ad10e7aad6f91b37) Signed-off-by: Peter Korsgaard --- toolchain/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/toolchain/Config.in b/toolchain/Config.in index b48c69dc41..219578092b 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -580,6 +580,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "5.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17 default "5.16" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_16 default "5.15" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_15 default "5.14" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 From peter at korsgaard.com Sat Oct 15 15:03:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:03:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/darkhttpd: security bump to version 1.14 In-Reply-To: <20221002211910.9526-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 2 Oct 2022 23:19:10 +0200") References: <20221002211910.9526-1-fontaine.fabrice@gmail.com> Message-ID: <87h705i0xl.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Drop patch (already in version) > - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 > https://github.com/emikulic/darkhttpd/releases/tag/v1.14 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:03:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:03:00 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/darkhttpd: security bump to version 1.14 Message-ID: <20221015150406.6DB2686BF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb4607da1f23ba3d447122d156c3abb39982a70e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit cced5b68acba02abfd72f66264faed60f4bfd65a) Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From dario.binacchi at amarulasolutions.com Sat Oct 15 15:07:02 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:07:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/uuu: bump to version 1.5.4 Message-ID: <20221015150702.3645905-1-dario.binacchi@amarulasolutions.com> - Fix memory leak cause by getaddrinfo - Fix crash when last block actual size < m_output_size - Add -dm to disable small memory for debug purpose - Fix a dead lock when reset stream - Stop http download when error happen - Add error check for all request_data - Fix linux build warning - Add gzip stream support - Rework buffer management to support small memory version - Fix support of empty environment variables in Windows OS - Fix crash when environment variable is last word in script - Fix update libusb path - Update libusb submodule - Drop vs2017 support. - Use $(DefaultPlatformToolset) - Try remove PlatformToolset and set WindowsTargetPlatformVersion to 10.0 Signed-off-by: Dario Binacchi --- package/uuu/uuu.hash | 2 +- package/uuu/uuu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uuu/uuu.hash b/package/uuu/uuu.hash index de00c649b12b..50da0f9bf3d9 100644 --- a/package/uuu/uuu.hash +++ b/package/uuu/uuu.hash @@ -1,4 +1,4 @@ # locally computed -sha256 9fcfe317c379be1e274aae34c19e1fd57188107f8fd0cdd379fe4473aacc92b1 uuu_source-1.4.243.tar.gz +sha256 baaf3e031958075b96530d43d7435f19cb428088894066e0b02349a3b9666666 uuu_source-1.5.4.tar.gz sha256 cc8d47f7b9260f6669ecd41c24554c552f17581d81ee8fc602c6d23edb8bf495 LICENSE sha256 584bfbb18b4c08b872d48b80419dd453307212a144134fb516bd6ddc0700c2e8 README.md diff --git a/package/uuu/uuu.mk b/package/uuu/uuu.mk index 7ed2599598c0..681c1fbc44e5 100644 --- a/package/uuu/uuu.mk +++ b/package/uuu/uuu.mk @@ -4,7 +4,7 @@ # ################################################################################ -UUU_VERSION = 1.4.243 +UUU_VERSION = 1.5.4 UUU_SOURCE = uuu_source-$(UUU_VERSION).tar.gz UUU_SITE = https://github.com/NXPmicro/mfgtools/releases/download/uuu_$(UUU_VERSION) UUU_LICENSE = BSD 3-Clause "New" or "Revised" License -- 2.32.0 From peter at korsgaard.com Sat Oct 15 15:08:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:08:32 +0200 Subject: [Buildroot] [PATCH 1/5] package/wpewebkit: security bump to version 2.36.8 In-Reply-To: <20221004133057.2003750-2-aperez@igalia.com> (Adrian Perez de Castro's message of "Tue, 4 Oct 2022 16:30:53 +0300") References: <20220920230029.1680134-1-aperez@igalia.com> <20221004133057.2003750-1-aperez@igalia.com> <20221004133057.2003750-2-aperez@igalia.com> Message-ID: <87czati0pb.fsf@dell.be.48ers.dk> >>>>> "Adrian" == Adrian Perez de Castro writes: > Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. > Release notes: > https://wpewebkit.org/release/wpewebkit-2.36.8.html > Accompanying security advisory: > https://wpewebkit.org/security/WSA-2022-0009.html > This also imports a build fix for ARM NEON targets. > Signed-off-by: Adrian Perez de Castro Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:04:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:42 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221015150850.8866A86BFF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=403b05553911374f537781adb0c977c93bc6f61e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard (cherry picked from commit fc523deaf9e2e83a69ef54a2eee965e3b618a758) Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:04:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:16 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/meson: bump to version 0.63.3 Message-ID: <20221015151003.7709E86D0D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f6aa94404a360c56985646630be26fca273f252 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard (cherry picked from commit ee62626e161298854e5cbebb02e07a59abee379a) Signed-off-by: Peter Korsgaard --- package/meson/meson.hash | 4 ++-- package/meson/meson.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/meson/meson.hash b/package/meson/meson.hash index df6a92d1f2..60d9ae9436 100644 --- a/package/meson/meson.hash +++ b/package/meson/meson.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://github.com/mesonbuild/meson/releases/download/0.63.2/meson-0.63.2.tar.gz.asc -sha256 16222f17ef76be0542c91c07994f9676ae879f46fc21c0c786a21ef2cb518bbf meson-0.63.2.tar.gz +# https://github.com/mesonbuild/meson/releases/download/0.63.3/meson-0.63.3.tar.gz.asc +sha256 519c0932e1a8b208741f0fdce90aa5c0b528dd297cf337009bf63539846ac056 meson-0.63.3.tar.gz sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 COPYING diff --git a/package/meson/meson.mk b/package/meson/meson.mk index f9b3f95bb7..3ca483c289 100644 --- a/package/meson/meson.mk +++ b/package/meson/meson.mk @@ -4,7 +4,7 @@ # ################################################################################ -MESON_VERSION = 0.63.2 +MESON_VERSION = 0.63.3 MESON_SITE = https://github.com/mesonbuild/meson/releases/download/$(MESON_VERSION) MESON_LICENSE = Apache-2.0 MESON_LICENSE_FILES = COPYING From peter at korsgaard.com Sat Oct 15 14:35:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 16:35:04 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/darkhttpd: security bump to version 1.14 Message-ID: <20221015151003.682F986D0A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=97ed4863da04e271f45db6715db975642c34bc04 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Drop patch (already in version) - Fix CVE-2020-25691: https://github.com/emikulic/darkhttpd/issues/21 https://github.com/emikulic/darkhttpd/releases/tag/v1.14 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit cced5b68acba02abfd72f66264faed60f4bfd65a) Signed-off-by: Peter Korsgaard --- ...lare-vars-outside-of-for-loop-for-std-c90.patch | 39 ---------------------- package/darkhttpd/darkhttpd.hash | 4 +-- package/darkhttpd/darkhttpd.mk | 2 +- 3 files changed, 3 insertions(+), 42 deletions(-) diff --git a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch b/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch deleted file mode 100644 index 7584bff98e..0000000000 --- a/package/darkhttpd/0001-Declare-vars-outside-of-for-loop-for-std-c90.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 81b491e60affd67f4ec2feccbee1cdf98dc57b81 Mon Sep 17 00:00:00 2001 -From: Emil Mikulic -Date: Sun, 21 Mar 2021 15:03:14 +1100 -Subject: [PATCH] Declare vars outside of for() loop for -std=c90. - -Fixes #2. - -[Retrieved from: -https://github.com/emikulic/darkhttpd/commit/81b491e60affd67f4ec2feccbee1cdf98dc57b81] -Signed-off-by: Fabrice Fontaine ---- - darkhttpd.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/darkhttpd.c b/darkhttpd.c -index 219a8a3..268628a 100644 ---- a/darkhttpd.c -+++ b/darkhttpd.c -@@ -966,8 +966,9 @@ static char *base64_encode(char *str) { - char *encoded_data = malloc(output_length+1); - if (encoded_data == NULL) return NULL; - -- for (int i = 0, j = 0; i < input_length;) { -- -+ int i; -+ int j; -+ for (i = 0, j = 0; i < input_length;) { - uint32_t octet_a = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_b = i < input_length ? (unsigned char)str[i++] : 0; - uint32_t octet_c = i < input_length ? (unsigned char)str[i++] : 0; -@@ -981,7 +982,7 @@ static char *base64_encode(char *str) { - } - - const int mod_table[] = {0, 2, 1}; -- for (int i = 0; i < mod_table[input_length % 3]; i++) -+ for (i = 0; i < mod_table[input_length % 3]; i++) - encoded_data[output_length - 1 - i] = '='; - encoded_data[output_length] = '\0'; - diff --git a/package/darkhttpd/darkhttpd.hash b/package/darkhttpd/darkhttpd.hash index af5a2bf8c9..188afff767 100644 --- a/package/darkhttpd/darkhttpd.hash +++ b/package/darkhttpd/darkhttpd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d88c395ac79ca9365aa5af71afe4ad136a4ed45099ca398168d4a2014dc0fc2 darkhttpd-1.13.tar.gz -sha256 44e784df460954c7760e2eeae69aecb12a3d23ca1c0a4f6047c3c6452b2e2f49 darkhttpd.c +sha256 e063de9efa5635260c8def00a4d41ec6145226a492d53fa1dac436967670d195 darkhttpd-1.14.tar.gz +sha256 f002944c9a8516e3346002d39c3e13681306833358c0f3c7781dff1fdb639710 darkhttpd.c diff --git a/package/darkhttpd/darkhttpd.mk b/package/darkhttpd/darkhttpd.mk index bc68d43ef9..bda08899b8 100644 --- a/package/darkhttpd/darkhttpd.mk +++ b/package/darkhttpd/darkhttpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -DARKHTTPD_VERSION = 1.13 +DARKHTTPD_VERSION = 1.14 DARKHTTPD_SITE = $(call github,emikulic,darkhttpd,v$(DARKHTTPD_VERSION)) DARKHTTPD_LICENSE = MIT DARKHTTPD_LICENSE_FILES = darkhttpd.c From peter at korsgaard.com Sat Oct 15 15:04:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:04:37 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/wpewebkit: security bump to version 2.36.8 Message-ID: <20221015151003.85F9586D13@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=281f923449594506058e7e418fd3a5d5a49579cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Bugfix release, with security fixes for CVE-2022-32886 and CVE-2022-32912. Release notes: https://wpewebkit.org/release/wpewebkit-2.36.8.html Accompanying security advisory: https://wpewebkit.org/security/WSA-2022-0009.html This also imports a build fix for ARM NEON targets. Signed-off-by: Adrian Perez de Castro Signed-off-by: Peter Korsgaard (cherry picked from commit fc523deaf9e2e83a69ef54a2eee965e3b618a758) Signed-off-by: Peter Korsgaard --- ...NEON.cpp-fails-to-build-NEON-fast-path-se.patch | 314 +++++++++++++++++++++ package/wpewebkit/wpewebkit.hash | 8 +- package/wpewebkit/wpewebkit.mk | 2 +- 3 files changed, 319 insertions(+), 5 deletions(-) diff --git a/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch new file mode 100644 index 0000000000..b61909b2ac --- /dev/null +++ b/package/wpewebkit/0001-FELightningNEON.cpp-fails-to-build-NEON-fast-path-se.patch @@ -0,0 +1,314 @@ +From 59c9e3a4aeb4753be97b3817d106816d9a4ebe73 Mon Sep 17 00:00:00 2001 +From: Adrian Perez de Castro +Date: Thu, 2 Jun 2022 11:19:06 +0300 +Subject: [PATCH] FELightningNEON.cpp fails to build, NEON fast path seems + unused https://bugs.webkit.org/show_bug.cgi?id=241182 + +Reviewed by NOBODY (OOPS!). + +Move the NEON fast path for the SVG lighting filter effects into +FELightingSoftwareApplier, and arrange to actually use them by +forwarding calls to applyPlatformGeneric() into applyPlatformNeon(). + +Some changes were needed to adapt platformApplyNeon() to the current +state of filters after r286140. This was not detected because the code +bitrotted due to it being guarded with CPU(ARM_TRADITIONAL), which does +not get used much these days: CPU(ARM_THUMB2) is more common. It should +be possible to use the NEON fast paths also in Thumb mode, but that is +left for a follow-up fix. + +* Source/WebCore/Sources.txt: +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp: +(WebCore::FELightingSoftwareApplier::platformApplyNeonWorker): +(WebCore::FELightingSoftwareApplier::getPowerCoefficients): +(WebCore::FELighting::platformApplyNeonWorker): Deleted. +(WebCore::FELighting::getPowerCoefficients): Deleted. +* Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h: +(WebCore::FELightingSoftwareApplier::applyPlatformNeon): +(WebCore::FELighting::platformApplyNeon): Deleted. +* Source/WebCore/platform/graphics/filters/DistantLightSource.h: +* Source/WebCore/platform/graphics/filters/FELighting.h: +* Source/WebCore/platform/graphics/filters/PointLightSource.h: +* Source/WebCore/platform/graphics/filters/SpotLightSource.h: +* Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h: + +Signed-off-by: Adrian Perez de Castro +[Upstream status: https://bugs.webkit.org/show_bug.cgi?id=241182] +--- + .../cpu/arm/filters/FELightingNEON.cpp | 4 +- + .../graphics/cpu/arm/filters/FELightingNEON.h | 52 +++++++++---------- + .../graphics/filters/DistantLightSource.h | 4 ++ + .../platform/graphics/filters/FELighting.h | 7 --- + .../graphics/filters/PointLightSource.h | 4 ++ + .../graphics/filters/SpotLightSource.h | 4 ++ + .../software/FELightingSoftwareApplier.h | 16 ++++++ + 7 files changed, 56 insertions(+), 35 deletions(-) + +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +index f6ff8c20a5a8..42a97ffc5372 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.cpp +@@ -49,7 +49,7 @@ short* feLightingConstantsForNeon() + return s_FELightingConstantsForNeon; + } + +-void FELighting::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) ++void FELightingSoftwareApplier::platformApplyNeonWorker(FELightingPaintingDataForNeon* parameters) + { + neonDrawLighting(parameters); + } +@@ -464,7 +464,7 @@ TOSTRING(neonDrawLighting) ":" NL + "b .lightStrengthCalculated" NL + ); // NOLINT + +-int FELighting::getPowerCoefficients(float exponent) ++int FELightingSoftwareApplier::getPowerCoefficients(float exponent) + { + // Calling a powf function from the assembly code would require to save + // and reload a lot of NEON registers. Since the base is in range [0..1] +diff --git a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +index b17c603d40d3..e4629cda0b7c 100644 +--- a/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h ++++ b/Source/WebCore/platform/graphics/cpu/arm/filters/FELightingNEON.h +@@ -24,14 +24,15 @@ + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +-#ifndef FELightingNEON_h +-#define FELightingNEON_h ++#pragma once + + #if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) + +-#include "FELighting.h" ++#include "FELightingSoftwareApplier.h" ++#include "ImageBuffer.h" + #include "PointLightSource.h" + #include "SpotLightSource.h" ++#include + #include + + namespace WebCore { +@@ -93,14 +94,14 @@ extern "C" { + void neonDrawLighting(FELightingPaintingDataForNeon*); + } + +-inline void FELighting::platformApplyNeon(const LightingData& data, const LightSource::PaintingData& paintingData) ++inline void FELightingSoftwareApplier::applyPlatformNeon(const FELightingSoftwareApplier::LightingData& data, const LightSource::PaintingData& paintingData) + { +- alignas(16) FELightingFloatArgumentsForNeon floatArguments; +- FELightingPaintingDataForNeon neonData = { ++ WebCore::FELightingFloatArgumentsForNeon alignas(16) floatArguments; ++ WebCore::FELightingPaintingDataForNeon neonData = { + data.pixels->data(), + 1, +- data.widthDecreasedByOne - 1, +- data.heightDecreasedByOne - 1, ++ data.width - 2, ++ data.height - 2, + 0, + 0, + 0, +@@ -111,23 +112,23 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set light source arguments. + floatArguments.constOne = 1; + +- auto color = m_lightingColor.toColorTypeLossy>().resolved(); ++ auto color = data.lightingColor.toColorTypeLossy>().resolved(); + + floatArguments.colorRed = color.red; + floatArguments.colorGreen = color.green; + floatArguments.colorBlue = color.blue; + floatArguments.padding4 = 0; + +- if (m_lightSource->type() == LS_POINT) { ++ if (data.lightSource->type() == LS_POINT) { + neonData.flags |= FLAG_POINT_LIGHT; +- PointLightSource& pointLightSource = static_cast(m_lightSource.get()); ++ const auto& pointLightSource = *static_cast(data.lightSource); + floatArguments.lightX = pointLightSource.position().x(); + floatArguments.lightY = pointLightSource.position().y(); + floatArguments.lightZ = pointLightSource.position().z(); + floatArguments.padding2 = 0; +- } else if (m_lightSource->type() == LS_SPOT) { ++ } else if (data.lightSource->type() == LS_SPOT) { + neonData.flags |= FLAG_SPOT_LIGHT; +- SpotLightSource& spotLightSource = static_cast(m_lightSource.get()); ++ const auto& spotLightSource = *static_cast(data.lightSource); + floatArguments.lightX = spotLightSource.position().x(); + floatArguments.lightY = spotLightSource.position().y(); + floatArguments.lightZ = spotLightSource.position().z(); +@@ -145,7 +146,7 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + if (spotLightSource.specularExponent() == 1) + neonData.flags |= FLAG_CONE_EXPONENT_IS_1; + } else { +- ASSERT(m_lightSource->type() == LS_DISTANT); ++ ASSERT(data.lightSource->type() == LS_DISTANT); + floatArguments.lightX = paintingData.initialLightingData.lightVector.x(); + floatArguments.lightY = paintingData.initialLightingData.lightVector.y(); + floatArguments.lightZ = paintingData.initialLightingData.lightVector.z(); +@@ -155,38 +156,39 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + // Set lighting arguments. + floatArguments.surfaceScale = data.surfaceScale; + floatArguments.minusSurfaceScaleDividedByFour = -data.surfaceScale / 4; +- if (m_lightingType == FELighting::DiffuseLighting) +- floatArguments.diffuseConstant = m_diffuseConstant; ++ if (data.filterType == FilterEffect::Type::FEDiffuseLighting) ++ floatArguments.diffuseConstant = data.diffuseConstant; + else { + neonData.flags |= FLAG_SPECULAR_LIGHT; +- floatArguments.diffuseConstant = m_specularConstant; +- neonData.specularExponent = getPowerCoefficients(m_specularExponent); +- if (m_specularExponent == 1) ++ floatArguments.diffuseConstant = data.specularConstant; ++ neonData.specularExponent = getPowerCoefficients(data.specularExponent); ++ if (data.specularExponent == 1) + neonData.flags |= FLAG_SPECULAR_EXPONENT_IS_1; + } + if (floatArguments.diffuseConstant == 1) + neonData.flags |= FLAG_DIFFUSE_CONST_IS_1; + +- int optimalThreadNumber = ((data.widthDecreasedByOne - 1) * (data.heightDecreasedByOne - 1)) / s_minimalRectDimension; ++ static constexpr int minimalRectDimension = 100 * 100; // Empirical data limit for parallel jobs ++ int optimalThreadNumber = ((data.width - 2) * (data.height - 2)) / minimalRectDimension; + if (optimalThreadNumber > 1) { + // Initialize parallel jobs +- ParallelJobs parallelJobs(&WebCore::FELighting::platformApplyNeonWorker, optimalThreadNumber); ++ ParallelJobs parallelJobs(&FELightingSoftwareApplier::platformApplyNeonWorker, optimalThreadNumber); + + // Fill the parameter array + int job = parallelJobs.numberOfJobs(); + if (job > 1) { + int yStart = 1; +- int yStep = (data.heightDecreasedByOne - 1) / job; ++ int yStep = (data.height - 2) / job; + for (--job; job >= 0; --job) { + FELightingPaintingDataForNeon& params = parallelJobs.parameter(job); + params = neonData; + params.yStart = yStart; +- params.pixels += (yStart - 1) * (data.widthDecreasedByOne + 1) * 4; ++ params.pixels += (yStart - 1) * data.width * 4; + if (job > 0) { + params.absoluteHeight = yStep; + yStart += yStep; + } else +- params.absoluteHeight = data.heightDecreasedByOne - yStart; ++ params.absoluteHeight = (data.height - 1) - yStart; + } + parallelJobs.execute(); + return; +@@ -199,5 +201,3 @@ inline void FELighting::platformApplyNeon(const LightingData& data, const LightS + } // namespace WebCore + + #endif // CPU(ARM_NEON) && COMPILER(GCC_COMPATIBLE) +- +-#endif // FELightingNEON_h +diff --git a/Source/WebCore/platform/graphics/filters/DistantLightSource.h b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +index 0660143fc1cf..2b1e86d99fa4 100644 +--- a/Source/WebCore/platform/graphics/filters/DistantLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/DistantLightSource.h +@@ -25,6 +25,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class DistantLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/FELighting.h b/Source/WebCore/platform/graphics/filters/FELighting.h +index 0c073bc13f8c..e0db00545c17 100644 +--- a/Source/WebCore/platform/graphics/filters/FELighting.h ++++ b/Source/WebCore/platform/graphics/filters/FELighting.h +@@ -35,8 +35,6 @@ + + namespace WebCore { + +-struct FELightingPaintingDataForNeon; +- + class FELighting : public FilterEffect { + public: + const Color& lightingColor() const { return m_lightingColor; } +@@ -67,11 +65,6 @@ protected: + + std::unique_ptr createSoftwareApplier() const override; + +-#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) +- static int getPowerCoefficients(float exponent); +- inline void platformApplyNeon(const LightingData&, const LightSource::PaintingData&); +-#endif +- + Color m_lightingColor; + float m_surfaceScale; + float m_diffuseConstant; +diff --git a/Source/WebCore/platform/graphics/filters/PointLightSource.h b/Source/WebCore/platform/graphics/filters/PointLightSource.h +index 5c9c7fb783e6..e53aa012ac1c 100644 +--- a/Source/WebCore/platform/graphics/filters/PointLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/PointLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class PointLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/SpotLightSource.h b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +index 04e331ec4ec0..763c8d400b00 100644 +--- a/Source/WebCore/platform/graphics/filters/SpotLightSource.h ++++ b/Source/WebCore/platform/graphics/filters/SpotLightSource.h +@@ -26,6 +26,10 @@ + #include "LightSource.h" + #include + ++namespace WTF { ++class TextStream; ++} // namespace WTF ++ + namespace WebCore { + + class SpotLightSource : public LightSource { +diff --git a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +index 3875b0a4b5de..6d3864aafb9a 100644 +--- a/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h ++++ b/Source/WebCore/platform/graphics/filters/software/FELightingSoftwareApplier.h +@@ -36,6 +36,7 @@ + namespace WebCore { + + class FELighting; ++struct FELightingPaintingDataForNeon; + + class FELightingSoftwareApplier final : public FilterEffectConcreteApplier { + WTF_MAKE_FAST_ALLOCATED; +@@ -132,8 +133,23 @@ private: + + static void applyPlatformGenericPaint(const LightingData&, const LightSource::PaintingData&, int startY, int endY); + static void applyPlatformGenericWorker(ApplyParameters*); ++ ++#if CPU(ARM_NEON) && CPU(ARM_TRADITIONAL) && COMPILER(GCC_COMPATIBLE) ++ static int getPowerCoefficients(float exponent); ++ static void platformApplyNeonWorker(FELightingPaintingDataForNeon*); ++ inline static void applyPlatformNeon(const LightingData&, const LightSource::PaintingData&); ++ ++ inline static void applyPlatformGeneric(const LightingData& data, const LightSource::PaintingData& paintingData) ++ { ++ applyPlatformNeon(data, paintingData); ++ } ++#else + static void applyPlatformGeneric(const LightingData&, const LightSource::PaintingData&); ++#endif ++ + static void applyPlatform(const LightingData&); + }; + + } // namespace WebCore ++ ++#include "FELightingNEON.h" +-- +2.37.3 + diff --git a/package/wpewebkit/wpewebkit.hash b/package/wpewebkit/wpewebkit.hash index 6881deb8fc..9c8beecf2e 100644 --- a/package/wpewebkit/wpewebkit.hash +++ b/package/wpewebkit/wpewebkit.hash @@ -1,7 +1,7 @@ -# From https://wpewebkit.org/releases/wpewebkit-2.36.7.tar.xz.sums -md5 a9f8d521d8171292aab842d3e8ba227e wpewebkit-2.36.7.tar.xz -sha1 e9255b3592bbaac8b20af03cafa31cedfb0b4898 wpewebkit-2.36.7.tar.xz -sha256 f3747d72ffc562ad0cfb6218fdf6d897c78c4bdbf5618e0fa26906fba52b95c9 wpewebkit-2.36.7.tar.xz +# From https://wpewebkit.org/releases/wpewebkit-2.36.8.tar.xz.sums +md5 939dc646bb6652fde9a5b6512c17fc58 wpewebkit-2.36.8.tar.xz +sha1 f45936c578f7dcfbb6064e87da6c098efe093e68 wpewebkit-2.36.8.tar.xz +sha256 8d42a349c910b2d0961b8d34fecef29cec3d21e3af5977346c90026692dc75eb wpewebkit-2.36.8.tar.xz # Hashes for license files: sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE diff --git a/package/wpewebkit/wpewebkit.mk b/package/wpewebkit/wpewebkit.mk index b9758083b7..0ff8204519 100644 --- a/package/wpewebkit/wpewebkit.mk +++ b/package/wpewebkit/wpewebkit.mk @@ -4,7 +4,7 @@ # ################################################################################ -WPEWEBKIT_VERSION = 2.36.7 +WPEWEBKIT_VERSION = 2.36.8 WPEWEBKIT_SITE = http://www.wpewebkit.org/releases WPEWEBKIT_SOURCE = wpewebkit-$(WPEWEBKIT_VERSION).tar.xz WPEWEBKIT_INSTALL_STAGING = YES From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:13 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:13 +0200 Subject: [Buildroot] [RESEND PATCH v7 0/2] Add support for BSH smm s2 [pro] boards Message-ID: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> The series adds support to BSH smm s2 [pro] boards. Changes in v7: - Add Giulio Benetti Reviewed-by tag. - Add Heiko Thiery Reviewed-by tag. Changes in v6: - Change offset in imx-boot partition of genimage.cfg from 33k to 32k. Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. - Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch. - Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering. - Add patchwork link to U-boot patch. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. - Shrink the Linux configuration. - Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log. - Add lore.kernel.org links to the submitted patches. - Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. - Remove U-Boot patches merged in version 2022-07. - Update the Linux patches. Changes in v2: - Drop the patch that added the 'uuu' package. It has been merged. - Patch 1/2: "configs/imx8mn_bsh_smm_s2_defconfig: new defconfig": - Change commit subject and description. - Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version. - Replace `Co-developed-by:' tag with `Co-authored-by'. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. - Remove useless and deprecated statements in nand-full.lst. - Remove the buildroot configurations for ext2/ext4 filesystem creation. - Patch 2/2: "configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig": - Change commit subject line. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. Dario Binacchi (1): configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Michael Trimarchi (1): configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig DEVELOPERS | 8 + .../common/imx8mn-bsh-smm-s2/linux.fragment | 895 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 + board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 + board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 + board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 ++ board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 45 + ...2-dmaengine-mxs-fix-section-mismatch.patch | 39 + ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 + 17 files changed, 1489 insertions(+) create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig -- 2.32.0 From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:15 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:15 +0200 Subject: [Buildroot] [RESEND PATCH v7 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig In-Reply-To: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> References: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> Message-ID: <20221015152015.3647735-3-dario.binacchi@amarulasolutions.com> From: Michael Trimarchi BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance. Board support package includes the following components: - mainline Linux kernel 5.19.7 - mainline U-Boot 2022-07 - Default packages from buildroot https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/ Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline Build and tested using: docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314 Cc: Ariel D'Alessandro Cc: Jagan Teki Cc: Heiko Thiery Cc: Giulio Benetti Reviewed-by: Giulio Benetti Reviewed-by: Heiko Thiery Signed-off-by: Michael Trimarchi Tested-by: Ariel D'Alessandro Signed-off-by: Dario Binacchi --- Changes in v7: - Add Heiko Thiery Reviewed-by tag. Changes in v6: - Change offset in imx-boot partition of genimage.cfg from 33k to 32k. Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. Changes in v2: - Change commit subject line. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. Signed-off-by: Dario Binacchi --- DEVELOPERS | 4 + .../imx8mn-bsh-smm-s2/linux.fragment | 0 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++ board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++ board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++ configs/imx8mn_bsh_smm_s2_defconfig | 2 +- configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++ 10 files changed, 173 insertions(+), 1 deletion(-) rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%) create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index d63cb22cce1d..cb2c10d322fb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -216,6 +216,8 @@ F: configs/snps_archs38_haps_defconfig F: configs/snps_archs38_hsdk_defconfig N: Ariel D'Alessandro +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/axfsutils/ F: package/mali-t76x/ @@ -675,6 +677,7 @@ F: package/xinetd/ N: Dario Binacchi F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/uuu/ N: Dario Binacchi @@ -2108,6 +2111,7 @@ F: package/python-pyzmq/ N: Michael Trimarchi F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/python-spidev/ N: Michael Vetter diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment similarity index 100% rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file mode 100644 index 000000000000..911135474253 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf @@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb + append root=PARTUUID=%PARTUUID% rootwait rw diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file mode 100755 index 000000000000..17b20f009771 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh @@ -0,0 +1,23 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/sdcard.img + diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file mode 100644 index 000000000000..10c52548cdfa --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg @@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 32K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +} diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file mode 100755 index 000000000000..bf8861f6a914 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh @@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" +PARTUUID="$($HOST_DIR/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg" diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file mode 100755 index 000000000000..3452fd4501f8 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file mode 100644 index 000000000000..5763f164fe13 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt @@ -0,0 +1,73 @@ +i.MX8MN BSH SMM S2 PRO +====================== + +How to build it +--------------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_pro_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ??? bl31.bin + ??? Image + ??? flash.bin + ??? ddr3* + ??? rootfs.ext2 + ??? rootfs.ext4 -> rootfs.ext2 + ??? rootfs.tar + ??? sdcard.img + ??? u-boot.bin + ??? u-boot-nodtb.bin + ??? u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing the emmc card image +---------------------------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ fastboot usb 0 + +Flash the images on eMMC. On your computer, run: + + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/ + + +Booting the board +----------------- + +By default the bootloader will search for the first valid image, +starting with the internal eMMC. diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 7f6023c64b45..298eba2c25f0 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig new file mode 100644 index 000000000000..97796dd01277 --- /dev/null +++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig @@ -0,0 +1,41 @@ +BR2_aarch64=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UUU=y -- 2.32.0 From dario.binacchi at amarulasolutions.com Sat Oct 15 15:20:14 2022 From: dario.binacchi at amarulasolutions.com (Dario Binacchi) Date: Sat, 15 Oct 2022 17:20:14 +0200 Subject: [Buildroot] [RESEND PATCH v7 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig In-Reply-To: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> References: <20221015152015.3647735-1-dario.binacchi@amarulasolutions.com> Message-ID: <20221015152015.3647735-2-dario.binacchi@amarulasolutions.com> BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance. Board support package includes the following components: - mainline Linux kernel 5.19.7 - mainline U-Boot 2022-07 - default packages from buildroot Patches applied to the Linux kernel and U-Boot have been submitted but not merged yet. https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/ The smm s2 board is basically the same as the pro except it boots from NAND instead of eMMC. Co-authored-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Reviewed-by: Giulio Benetti --- Changes in v7: - Add Giulio Benetti Reviewed-by tag. (no changes since v5) Changes in v5: - Update the commit description. - Bump the kernel version to 5.19.7. - Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch. - Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering. - Add patchwork link to U-boot patch. Changes in v4: - Update the commit description. - Bump the kernel version to 5.18.19. - Shrink the Linux configuration. - Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log. - Add lore.kernel.org links to the submitted patches. - Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel. Changes in v3: - Update the commit description. - Bump U-Boot to version 2022-07. - Remove U-Boot patches merged in version 2022-07. - Update the Linux patches. Changes in v2: - Change commit subject and description. - Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version. - Replace `Co-developed-by:' tag with `Co-authored-by'. - Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script. - Replace the linux.config file with an architectural defconfig and a config fragment for the changes. - Remove useless and deprecated statements in nand-full.lst. - Remove the buildroot configurations for ext2/ext4 filesystem creation. Signed-off-by: Dario Binacchi --- DEVELOPERS | 4 + board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 895 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 45 + ...2-dmaengine-mxs-fix-section-mismatch.patch | 39 + ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + 10 files changed, 1317 insertions(+) create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index d2bd0d809a6a..d63cb22cce1d 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -673,6 +673,8 @@ F: package/luaexpat/ F: package/xinetd/ N: Dario Binacchi +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/uuu/ N: Dario Binacchi @@ -2104,6 +2106,8 @@ F: package/python-crc16/ F: package/python-pyzmq/ N: Michael Trimarchi +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/python-spidev/ N: Michael Vetter diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh new file mode 100755 index 000000000000..1f343d516dcf --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh @@ -0,0 +1,26 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/rootfs.ubifs \ + ${IMAGES_DIR}/Image \ + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb + diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file mode 100644 index 000000000000..80803ab08886 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment @@ -0,0 +1,895 @@ +# CONFIG_BPF_SYSCALL is not set +CONFIG_TASK_DELAY_ACCT=y +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_BPF is not set +CONFIG_RELAY=y +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_APPLE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM4908 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_INTEL_SOCFPGA is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_TESLA_FSD is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_KEXEC is not set +# CONFIG_KEXEC_FILE is not set +# CONFIG_XEN is not set +# CONFIG_ARM64_PTR_AUTH is not set +# CONFIG_ARM64_TLB_RANGE is not set +# CONFIG_ARM64_MTE is not set +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +# CONFIG_HIBERNATION is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set +CONFIG_ARM_IMX_CPUFREQ_DT=y +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set +# CONFIG_ARM_SCMI_CPUFREQ is not set +# CONFIG_ARM_TEGRA186_CPUFREQ is not set +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_ACPI_APEI_PCIEAER is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_GCC_PLUGINS is not set +CONFIG_IPV6=y +CONFIG_MODVERSIONS=y +CONFIG_IPV6_SIT=m +CONFIG_NET_DSA_TAG_OCELOT=m +CONFIG_VLAN_8021Q=y +CONFIG_LLC2=y +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_PKTGEN=m +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +# CONFIG_CAN_RCAR is not set +# CONFIG_CAN_RCAR_CANFD is not set +# CONFIG_CAN_MCP251XFD is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIVHCI=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_MRVL_SDIO is not set +# CONFIG_BT_QCOMSMD is not set +# CONFIG_RFKILL is not set +# CONFIG_PCI is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIEAER is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PASID is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_PCI_AARDVARK is not set +# CONFIG_PCI_TEGRA is not set +# CONFIG_PCIE_RCAR_HOST is not set +# CONFIG_PCIE_RCAR_EP is not set +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_XGENE is not set +# CONFIG_PCIE_ALTERA is not set +# CONFIG_PCIE_ALTERA_MSI is not set +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +# CONFIG_PCIE_ROCKCHIP_HOST is not set +# CONFIG_PCIE_BRCMSTB is not set +# CONFIG_PCI_IMX6 is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCI_HISI is not set +# CONFIG_PCIE_QCOM is not set +# CONFIG_PCIE_ARMADA_8K is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_HISI_STB is not set +# CONFIG_PCIE_TEGRA194_HOST is not set +# CONFIG_PCIE_VISCONTI_HOST is not set +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set +# CONFIG_PCI_ENDPOINT is not set +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set +# CONFIG_PCI_EPF_TEST is not set +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +CONFIG_BRCMSTB_GISB_ARB=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_HISILICON_LPC is not set +# CONFIG_TEGRA_ACONNECT is not set +# CONFIG_RASPBERRYPI_FIRMWARE is not set +# CONFIG_INTEL_STRATIX10_SERVICE is not set +# CONFIG_INTEL_STRATIX10_RSU is not set +CONFIG_IMX_DSP=y +# CONFIG_GNSS is not set +# CONFIG_GNSS_MTK_SERIAL is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_NAND_BRCMNAND is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_MARVELL is not set +# CONFIG_MTD_NAND_FSL_IFC is not set +# CONFIG_MTD_NAND_QCOM is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_MTD_UBI=y +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_RAID_ATTRS=m +# CONFIG_SCSI_HISI_SAS_PCI is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_UFS_QCOM is not set +# CONFIG_SCSI_UFS_HISI is not set +# CONFIG_SCSI_UFS_EXYNOS is not set +# CONFIG_SATA_AHCI is not set +CONFIG_AHCI_IMX=y +# CONFIG_AHCI_BRCM is not set +# CONFIG_AHCI_MVEBU is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_RCAR is not set +CONFIG_DM_CRYPT=m +# CONFIG_NET_DSA_BCM_SF2 is not set +# CONFIG_NET_DSA_MSCC_FELIX is not set +# CONFIG_NET_XGENE is not set +# CONFIG_ATL1C is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNX2X is not set +# CONFIG_THUNDER_NIC_PF is not set +CONFIG_FSL_XGMAC_MDIO=y +CONFIG_FSL_ENETC_IERB=y +# CONFIG_FSL_FMAN is not set +# CONFIG_FSL_DPAA_ETH is not set +# CONFIG_FSL_DPAA2_ETH is not set +# CONFIG_FSL_ENETC is not set +# CONFIG_FSL_ENETC_VF is not set +# CONFIG_FSL_ENETC_QOS is not set +CONFIG_MVMDIO=y +CONFIG_MSCC_OCELOT_SWITCH=m +# CONFIG_HNS3 is not set +# CONFIG_HNS3_HCLGE is not set +# CONFIG_HNS3_ENET is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_MVNETA is not set +# CONFIG_MVPP2 is not set +# CONFIG_SKY2 is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLX5_CORE_EN is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +# CONFIG_RAVB is not set +CONFIG_STMMAC_ETH=y +CONFIG_DWMAC_GENERIC=m +CONFIG_MICROCHIP_PHY=y +CONFIG_NXP_TJA11XX_PHY=y +CONFIG_MDIO_BITBANG=y +# CONFIG_SNI_AVE is not set +# CONFIG_SNI_NETSEC is not set +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set +# CONFIG_QCOM_IPA is not set +# CONFIG_MESON_GXL_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_BCM54140_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MARVELL_10G_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_ROCKCHIP_PHY is not set +# CONFIG_DP83867_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_USB_BRCMSTB is not set +CONFIG_USB_RTL8152=y +CONFIG_USB_USBNET=y +CONFIG_BRCMFMAC=y +CONFIG_HOSTAP=y +# CONFIG_ATH10K is not set +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_SNOC is not set +# CONFIG_WCN36XX is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWIFIEX_SDIO is not set +# CONFIG_MWIFIEX_PCIE is not set +CONFIG_KEYBOARD_SNVS_PWRKEY=y +# CONFIG_KEYBOARD_IMX_SC_KEY is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_INPUT_PM8941_PWRKEY is not set +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_HISI_POWERKEY is not set +# CONFIG_SERIAL_8250_BCM2835AUX is not set +# CONFIG_SERIAL_8250_OMAP is not set +# CONFIG_SERIAL_8250_MT6577 is not set +# CONFIG_SERIAL_8250_UNIPHIER is not set +# CONFIG_SERIAL_MESON is not set +# CONFIG_SERIAL_MESON_CONSOLE is not set +# CONFIG_SERIAL_SAMSUNG is not set +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set +# CONFIG_SERIAL_TEGRA is not set +# CONFIG_SERIAL_TEGRA_TCU is not set +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_MSM is not set +# CONFIG_SERIAL_MSM_CONSOLE is not set +# CONFIG_SERIAL_QCOM_GENI is not set +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set +# CONFIG_SERIAL_MVEBU_UART is not set +# CONFIG_SERIAL_OWL is not set +# CONFIG_I2C_MUX is not set +# CONFIG_I2C_BCM2835 is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_MT65XX is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_OWL is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_QCOM_CCI is not set +# CONFIG_I2C_QCOM_GENI is not set +# CONFIG_I2C_QUP is not set +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_S3C2410 is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_TEGRA is not set +# CONFIG_I2C_UNIPHIER_F is not set +# CONFIG_I2C_RCAR is not set +# CONFIG_SPI_ARMADA_3700 is not set +# CONFIG_SPI_BCM2835 is not set +# CONFIG_SPI_BCM2835AUX is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_DW_DMA is not set +# CONFIG_SPI_DW_MMIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_ORION is not set +CONFIG_SPI_SPIDEV=y +CONFIG_SPI_SLAVE=y +CONFIG_SPI_SLAVE_TIME=y +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y +CONFIG_PINCTRL=y +# CONFIG_SPI_RPCIF is not set +# CONFIG_SPI_RSPI is not set +# CONFIG_SPI_QCOM_QSPI is not set +# CONFIG_SPI_QUP is not set +# CONFIG_SPI_QCOM_GENI is not set +# CONFIG_SPI_S3C64XX is not set +# CONFIG_SPI_SH_MSIOF is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPMI is not set +# CONFIG_PINCTRL_OWL is not set +# CONFIG_PINCTRL_S700 is not set +# CONFIG_PINCTRL_S900 is not set +CONFIG_GPIOLIB=y +# CONFIG_PINCTRL_MSM is not set +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_QDF2XXX is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SC7280 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +# CONFIG_PINCTRL_SM8350 is not set +# CONFIG_PINCTRL_SM8450 is not set +# CONFIG_PINCTRL_LPASS_LPI is not set +# CONFIG_GPIO_DAVINCI is not set +# CONFIG_GPIO_MPC8XXX is not set +# CONFIG_GPIO_RCAR is not set +# CONFIG_GPIO_UNIPHIER is not set +# CONFIG_GPIO_VISCONTI is not set +# CONFIG_GPIO_XGENE_SB is not set +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_GPIO_MAX77620 is not set +# CONFIG_GPIO_SL28CPLD is not set +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_BQ25980 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set +# CONFIG_SENSORS_SL28CPLD is not set +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_IMX_SC_THERMAL=y +CONFIG_IMX8MM_THERMAL=y +CONFIG_QORIQ_THERMAL=y +# CONFIG_SUN8I_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +# CONFIG_RCAR_GEN3_THERMAL is not set +# CONFIG_RZG2L_THERMAL is not set +# CONFIG_ARMADA_THERMAL is not set +# CONFIG_BCM2711_THERMAL is not set +# CONFIG_BCM2835_THERMAL is not set +# CONFIG_BRCMSTB_THERMAL is not set +# CONFIG_EXYNOS_THERMAL is not set +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_TEGRA_BPMP_THERMAL is not set +# CONFIG_QCOM_TSENS is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_QCOM_LMH is not set +# CONFIG_UNIPHIER_THERMAL is not set +# CONFIG_SL28CPLD_WATCHDOG is not set +# CONFIG_S3C2410_WATCHDOG is not set +# CONFIG_BCM7038_WDT is not set +# CONFIG_SUNXI_WATCHDOG is not set +CONFIG_IMX_SC_WDT=y +CONFIG_IMX7ULP_WDT=y +# CONFIG_QCOM_WDT is not set +# CONFIG_MESON_GXBB_WATCHDOG is not set +# CONFIG_MESON_WATCHDOG is not set +# CONFIG_RENESAS_WDT is not set +# CONFIG_RENESAS_RZG2LWDT is not set +# CONFIG_UNIPHIER_WATCHDOG is not set +# CONFIG_BCM2835_WDT is not set +# CONFIG_MFD_ALTERA_SYSMGR is not set +# CONFIG_MFD_AXP20X_RSB is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_HI655X_PMIC is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_SPMI_PMIC is not set +# CONFIG_MFD_SL28CPLD is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_HI655X is not set +# CONFIG_REGULATOR_MP8859 is not set +# CONFIG_REGULATOR_MT6358 is not set +# CONFIG_REGULATOR_MT6397 is not set +# CONFIG_REGULATOR_PF8X00 is not set +# CONFIG_REGULATOR_QCOM_RPMH is not set +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set +# CONFIG_REGULATOR_QCOM_SPMI is not set +# CONFIG_REGULATOR_TPS65132 is not set +CONFIG_MEDIA_SUPPORT=y +# CONFIG_RC_CORE is not set +# CONFIG_RC_DECODERS is not set +# CONFIG_RC_DEVICES is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_SUNXI is not set +CONFIG_SDR_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_QCOM_CAMSS is not set +# CONFIG_VIDEO_RCAR_CSI2 is not set +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SUN6I_CSI is not set +# CONFIG_VIDEO_RCAR_ISP is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set +# CONFIG_VIDEO_RENESAS_FDP1 is not set +# CONFIG_VIDEO_RENESAS_FCP is not set +# CONFIG_VIDEO_RENESAS_VSP1 is not set +# CONFIG_VIDEO_QCOM_VENUS is not set +# CONFIG_VIDEO_RCAR_DRIF is not set +CONFIG_VIDEO_OV5640=y +CONFIG_DRM=y +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_EXYNOS5433_DECON is not set +# CONFIG_DRM_EXYNOS7_DECON is not set +# CONFIG_DRM_EXYNOS_DSI is not set +# CONFIG_DRM_EXYNOS_DP is not set +# CONFIG_DRM_EXYNOS_HDMI is not set +# CONFIG_DRM_EXYNOS_MIC is not set +# CONFIG_DRM_ROCKCHIP is not set +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set +# CONFIG_ROCKCHIP_CDN_DP is not set +# CONFIG_ROCKCHIP_DW_HDMI is not set +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set +# CONFIG_ROCKCHIP_INNO_HDMI is not set +# CONFIG_ROCKCHIP_LVDS is not set +# CONFIG_DRM_RCAR_DU is not set +# CONFIG_DRM_RCAR_MIPI_DSI is not set +# CONFIG_DRM_SUN4I is not set +# CONFIG_DRM_SUN6I_DSI is not set +# CONFIG_DRM_SUN8I_DW_HDMI is not set +# CONFIG_DRM_SUN8I_MIXER is not set +# CONFIG_DRM_MSM is not set +# CONFIG_DRM_TEGRA is not set +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_EDP is not set +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set +CONFIG_DRM_DISPLAY_CONNECTOR=m +# CONFIG_DRM_LONTIUM_LT8912B is not set +CONFIG_DRM_NWL_MIPI_DSI=y +# CONFIG_DRM_LONTIUM_LT9611UXC is not set +# CONFIG_DRM_PARADE_PS8640 is not set +CONFIG_DRM_I2C_ADV7511=y +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +CONFIG_DRM_IMX_DCSS=y +# CONFIG_DRM_VC4 is not set +# CONFIG_DRM_HISI_HIBMC is not set +CONFIG_DRM_MXSFB=y +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_MEDIATEK_HDMI is not set +# CONFIG_DRM_MESON is not set +CONFIG_DRM_LEGACY=y +# CONFIG_FB is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_EFI is not set +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_LOGO is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_HDA_TEGRA is not set +# CONFIG_SND_HDA_CODEC_HDMI is not set +CONFIG_SND_SOC_FSL_ASRC=y +CONFIG_SND_SOC_FSL_EASRC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_FSL_ASOC_CARD=y +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_OF=m +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y +CONFIG_SND_SOC_AK4458=y +CONFIG_SND_SOC_AK5558=y +CONFIG_SND_SOC_PCM512x_I2C=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_SND_AUDIO_GRAPH_CARD=y +CONFIG_USB_CONN_GPIO=y +# CONFIG_SND_BCM2835_SOC_I2S is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_SGTL5000 is not set +# CONFIG_SND_SOC_IMX_SPDIF is not set +# CONFIG_SND_SOC_IMX_AUDMIX is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_GX_SOUND_CARD is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_APQ8016_SBC is not set +# CONFIG_SND_SOC_MSM8996 is not set +# CONFIG_SND_SOC_SDM845 is not set +# CONFIG_SND_SOC_SM8250 is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set +# CONFIG_SND_SOC_SAMSUNG is not set +# CONFIG_SND_SOC_RCAR is not set +# CONFIG_SND_SOC_RZ is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_TEGRA210_AHUB is not set +# CONFIG_SND_SOC_TEGRA210_DMIC is not set +# CONFIG_SND_SOC_TEGRA210_I2S is not set +# CONFIG_SND_SOC_TEGRA186_DSPK is not set +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set +# CONFIG_SND_SOC_TEGRA210_MVC is not set +# CONFIG_SND_SOC_TEGRA210_SFC is not set +# CONFIG_SND_SOC_TEGRA210_AMX is not set +# CONFIG_SND_SOC_TEGRA210_ADX is not set +# CONFIG_SND_SOC_TEGRA210_MIXER is not set +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_RT5659 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIMPLE_MUX is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_WCD934X is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WSA881X is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_I2C_HID_ACPI is not set +# CONFIG_I2C_HID_OF is not set +# CONFIG_USB_XHCI_PCI_RENESAS is not set +# CONFIG_USB_XHCI_TEGRA is not set +# CONFIG_USB_EHCI_EXYNOS is not set +# CONFIG_USB_OHCI_EXYNOS is not set +CONFIG_USB_HCD_TEST_MODE=y +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_RENESAS_USBHS is not set +CONFIG_USB_UAS=y +# CONFIG_USB_CDNS_SUPPORT is not set +# CONFIG_USB_CDNS3 is not set +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +# CONFIG_USB_MTU3 is not set +# CONFIG_USB_MUSB_SUNXI is not set +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=y +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_MXS_PHY=y +CONFIG_USB_ULPI=y +CONFIG_USB_SNP_UDC_PLAT=y +CONFIG_USB_BDC_UDC=y +CONFIG_USB_CONFIGFS=y +# CONFIG_USB_RENESAS_USBHS_UDC is not set +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_TEGRA_XUDC is not set +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_UVC=y +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +# CONFIG_TYPEC_TPS6598X is not set +# CONFIG_MMC_SDHCI_ACPI is not set +# CONFIG_MMC_SDHCI_TEGRA is not set +# CONFIG_MMC_MESON_GX is not set +# CONFIG_MMC_SDHCI_MSM is not set +# CONFIG_MMC_SDHI is not set +# CONFIG_MMC_UNIPHIER is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SUNXI is not set +# CONFIG_MMC_BCM2835 is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_OWL is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_EDAC_LAYERSCAPE is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set +# CONFIG_RTC_DRV_S3C is not set +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_IMX_SC=y +# CONFIG_RTC_DRV_SUN6I is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +# CONFIG_RTC_DRV_TEGRA is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_MT6397 is not set +CONFIG_BCM_SBA_RAID=m +# CONFIG_DMA_BCM2835 is not set +# CONFIG_DMA_SUN6I is not set +CONFIG_FSL_QDMA=m +CONFIG_IMX_SDMA=y +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +CONFIG_MXS_DMA=y +# CONFIG_OWL_DMA is not set +# CONFIG_TEGRA186_GPC_DMA is not set +# CONFIG_TEGRA20_APB_DMA is not set +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_QCOM_BAM_DMA is not set +CONFIG_DMATEST=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y +# CONFIG_RCAR_DMAC is not set +# CONFIG_RENESAS_USB_DMAC is not set +# CONFIG_RZ_DMAC is not set +# CONFIG_TI_K3_UDMA is not set +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set +# CONFIG_VFIO_PCI is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_VIDEO_HANTRO is not set +# CONFIG_VIDEO_IMX_MEDIA is not set +# CONFIG_COMMON_CLK_SCMI is not set +# CONFIG_COMMON_CLK_FSL_SAI is not set +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_CLK_RASPBERRYPI is not set +# CONFIG_CLK_IMX8MM is not set +# CONFIG_CLK_IMX8MP is not set +# CONFIG_CLK_IMX8MQ is not set +# CONFIG_CLK_IMX8QXP is not set +# CONFIG_CLK_IMX8ULP is not set +# CONFIG_TI_SCI_CLK is not set +# CONFIG_COMMON_CLK_QCOM is not set +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_SMD_RPM is not set +# CONFIG_QCOM_CLK_RPMH is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_QCS_GCC_404 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GCC_7280 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SM_GCC_8350 is not set +# CONFIG_SM_GCC_8450 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_CLK_GFM_LPASS_SM8250 is not set +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set +# CONFIG_HWSPINLOCK_QCOM is not set +# CONFIG_RENESAS_OSTM is not set +# CONFIG_BCM2835_MBOX is not set +# CONFIG_QCOM_APCS_IPC is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_ROCKCHIP_IOMMU is not set +# CONFIG_TEGRA_IOMMU_SMMU is not set +# CONFIG_MTK_IOMMU is not set +# CONFIG_QCOM_IOMMU is not set +CONFIG_IMX_REMOTEPROC=y +CONFIG_IMX_DSP_REMOTEPROC=y +CONFIG_RPMSG_CHAR=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +# CONFIG_QCOM_SYSMON is not set +# CONFIG_QCOM_WCNSS_PIL is not set +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set +# CONFIG_RPMSG_QCOM_SMD is not set +CONFIG_SOC_BRCMSTB=y +# CONFIG_OWL_PM_DOMAINS is not set +# CONFIG_RASPBERRYPI_POWER is not set +# CONFIG_FSL_DPAA is not set +# CONFIG_FSL_MC_DPIO is not set +CONFIG_SOC_TI=y +# CONFIG_MTK_DEVAPC is not set +# CONFIG_MTK_PMIC_WRAP is not set +# CONFIG_QCOM_AOSS_QMP is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +# CONFIG_QCOM_RPMHPD is not set +# CONFIG_QCOM_RPMPD is not set +# CONFIG_QCOM_SMEM is not set +# CONFIG_QCOM_SMD_RPM is not set +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_SOCINFO is not set +# CONFIG_QCOM_STATS is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_APR is not set +# CONFIG_ARCH_R8A77995 is not set +# CONFIG_ARCH_R8A77990 is not set +# CONFIG_ARCH_R8A77950 is not set +# CONFIG_ARCH_R8A77951 is not set +# CONFIG_ARCH_R8A77965 is not set +# CONFIG_ARCH_R8A77960 is not set +# CONFIG_ARCH_R8A77961 is not set +# CONFIG_ARCH_R8A779F0 is not set +# CONFIG_ARCH_R8A77980 is not set +# CONFIG_ARCH_R8A77970 is not set +# CONFIG_ARCH_R8A779A0 is not set +# CONFIG_ARCH_R8A774C0 is not set +# CONFIG_ARCH_R8A774E1 is not set +# CONFIG_ARCH_R8A774A1 is not set +# CONFIG_ARCH_R8A774B1 is not set +# CONFIG_ARCH_R9A07G044 is not set +# CONFIG_ROCKCHIP_IODOMAIN is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +# CONFIG_ARCH_TEGRA_132_SOC is not set +# CONFIG_ARCH_TEGRA_210_SOC is not set +# CONFIG_ARCH_TEGRA_186_SOC is not set +# CONFIG_ARCH_TEGRA_194_SOC is not set +# CONFIG_ARCH_TEGRA_234_SOC is not set +# CONFIG_TI_SCI_PM_DOMAINS is not set +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set +CONFIG_MEMORY=y +# CONFIG_RENESAS_RPCIF is not set +CONFIG_IMX8QXP_ADC=y +# CONFIG_EXYNOS_ADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_RZG2L_ADC is not set +# CONFIG_TI_ADS1015 is not set +CONFIG_IIO_ST_LSM6DSX=y +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_VCNL4000 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_MPL3115 is not set +# CONFIG_PWM_BCM2835 is not set +# CONFIG_PWM_BRCMSTB is not set +CONFIG_PWM_FSL_FTM=m +CONFIG_PWM_IMX27=y +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_MEDIATEK is not set +# CONFIG_PWM_RCAR is not set +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +# CONFIG_PWM_SAMSUNG is not set +# CONFIG_PWM_SL28CPLD is not set +# CONFIG_PWM_SUN4I is not set +# CONFIG_PWM_TEGRA is not set +# CONFIG_PWM_VISCONTI is not set +# CONFIG_SL28CPLD_INTC is not set +# CONFIG_QCOM_PDC is not set +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set +# CONFIG_RESET_TI_SCI is not set +CONFIG_PHY_CADENCE_SALVO=y +CONFIG_PHY_MIXEL_MIPI_DPHY=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +# CONFIG_PHY_FSL_IMX8M_PCIE is not set +# CONFIG_PHY_HI6220_USB is not set +# CONFIG_PHY_HISTB_COMBPHY is not set +# CONFIG_PHY_HISI_INNO_USB2 is not set +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +# CONFIG_PHY_MTK_TPHY is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_RCAR_GEN3_PCIE is not set +# CONFIG_PHY_RCAR_GEN3_USB2 is not set +# CONFIG_PHY_RCAR_GEN3_USB3 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +# CONFIG_PHY_SAMSUNG_UFS is not set +# CONFIG_PHY_UNIPHIER_USB2 is not set +# CONFIG_PHY_UNIPHIER_USB3 is not set +# CONFIG_PHY_TEGRA_XUSB is not set +# CONFIG_PHY_AM654_SERDES is not set +# CONFIG_PHY_J721E_WIZ is not set +CONFIG_FSL_IMX8_DDR_PMU=y +# CONFIG_QCOM_L2_PMU is not set +# CONFIG_QCOM_L3_PMU is not set +# CONFIG_MTK_EFUSE is not set +# CONFIG_QCOM_QFPROM is not set +# CONFIG_ROCKCHIP_EFUSE is not set +# CONFIG_NVMEM_SUNXI_SID is not set +# CONFIG_UNIPHIER_EFUSE is not set +# CONFIG_MESON_EFUSE is not set +# CONFIG_NVMEM_RMEM is not set +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set +# CONFIG_SLIMBUS is not set +# CONFIG_SLIM_QCOM_NGD_CTRL is not set +# CONFIG_INTERCONNECT_IMX is not set +# CONFIG_INTERCONNECT_IMX8MM is not set +# CONFIG_INTERCONNECT_IMX8MN is not set +# CONFIG_INTERCONNECT_IMX8MQ is not set +# CONFIG_INTERCONNECT_QCOM is not set +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_STREEBOG=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_CCITT=m +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set +CONFIG_IRQ_POLL=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_INFO_REDUCED is not set +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SOURCE_ETM4X=y diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file mode 100644 index 000000000000..c01d2d6c1dac --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst @@ -0,0 +1,29 @@ +# @_flash.bin | bootloader +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader +# @_filesystem | filesystem to burn +# @_kernel | kernel image +# @_dtb | dtb image + +# This command will be run when ROM support stream mode +# i.MX8QXP, i.MX8QM +SDPS: boot -f _flash.bin + +FB: ucmd setenv fastboot_buffer ${loadaddr} +FB: download -f _image +# Burn image to nandfit partition if needed +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} + +FB[-t 10000]: ucmd ubi part nandrootfs +FB[-t 10000]: ucmd ubi create root - +FB: download -f _filesystem +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} + +FB: download -f _kernel +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} + +FB: download -f _dtb +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} + +FB: reboot +FB: done diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file mode 100644 index 000000000000..9293058ef0e1 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch @@ -0,0 +1,45 @@ +From d4872d93ba5f7111562b0ac1cab356f56d01c1b4 Mon Sep 17 00:00:00 2001 +From: Dario Binacchi +Date: Sun, 22 May 2022 17:40:15 +0200 +Subject: [PATCH] dmaengine: mxs: use platform_driver_register + +Driver registration fails on SOC imx8mn as its supplier, the clock +control module, is probed later than subsys initcall level. This driver +uses platform_driver_probe which is not compatible with deferred probing +and won't be probed again later if probe function fails due to clock not +being available at that time. + +This patch replaces the use of platform_driver_probe with +platform_driver_register which will allow probing the driver later again +when the clock control module will be available. + +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") +Co-developed-by: Michael Trimarchi +Signed-off-by: Michael Trimarchi +Signed-off-by: Dario Binacchi +Cc: stable at vger.kernel.org +Link: https://lore.kernel.org/lkml/20220712160909.2054141-1-dario.binacchi at amarulasolutions.com +--- + drivers/dma/mxs-dma.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 994fc4d2aca4..18f8154b859b 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, + }, ++ .probe = mxs_dma_probe, + }; +- +-static int __init mxs_dma_module_init(void) +-{ +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe); +-} +-subsys_initcall(mxs_dma_module_init); ++builtin_platform_driver(mxs_dma_driver); +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file mode 100644 index 000000000000..faf3b7290e68 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch @@ -0,0 +1,39 @@ +From 1322ec115e91419a8f7b7d6d5e36e68316908b5a Mon Sep 17 00:00:00 2001 +From: Dario Binacchi +Date: Tue, 12 Jul 2022 15:15:19 +0200 +Subject: [PATCH] dmaengine: mxs: fix section mismatch + +The patch was suggested by the following modpost warning: + +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe() +The variable mxs_dma_driver references +the function __init mxs_dma_probe() +If the reference is valid then annotate the +variable with __init* or __refdata (see linux/init.h) or name the variable: +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console + +Co-developed-by: Michael Trimarchi +Signed-off-by: Michael Trimarchi +Signed-off-by: Dario Binacchi +Cc: stable at vger.kernel.org +Link: https://lore.kernel.org/linux-arm-kernel/20220712160909.2054141-2-dario.binacchi at amarulasolutions.com/ +--- + drivers/dma/mxs-dma.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 18f8154b859b..a01953e06048 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) + return 0; + } + +-static struct platform_driver mxs_dma_driver = { ++static struct platform_driver mxs_dma_driver __initdata = { + .driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file mode 100644 index 000000000000..59db559b9301 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch @@ -0,0 +1,160 @@ +From 3878b941c6bde84e29b2725e4261d85bea828752 Mon Sep 17 00:00:00 2001 +From: Michael Trimarchi +Date: Sun, 22 May 2022 15:22:08 +0200 +Subject: [PATCH] include/configs: Remove rootwait=1 to all the affected boards + +rootwait=1 is not a valid kernel boot parameters. According +to the documenation is only rootwait + +rootwait [KNL] Wait (indefinitely) for root device to show up. + Useful for devices that are detected asynchronously + (e.g. USB and MMC devices). + +Fix: +Unknown kernel command line parameters "rootwait=1", will be passed to user space. + +Signed-off-by: Michael Trimarchi +Reviewed-by: Heiko Schocher +Link: https://patchwork.ozlabs.org/project/uboot/patch/20220520110013.32811-1-michael at amarulasolutions.com/ +Signed-off-by: Dario Binacchi +--- + include/configs/am335x_evm.h | 2 +- + include/configs/am43xx_evm.h | 2 +- + include/configs/baltos.h | 2 +- + include/configs/chiliboard.h | 2 +- + include/configs/etamin.h | 2 +- + include/configs/imx8mn_bsh_smm_s2.h | 2 +- + include/configs/siemens-am33x-common.h | 4 ++-- + include/configs/ti_armv7_keystone2.h | 2 +- + include/environment/ti/nand.h | 2 +- + 9 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index fd5b209a52db..f301a6dc835b 100644 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -34,7 +34,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h +index 5057441f7506..1f5c3cd04e88 100644 +--- a/include/configs/am43xx_evm.h ++++ b/include/configs/am43xx_evm.h +@@ -166,7 +166,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/baltos.h b/include/configs/baltos.h +index b881d8c03fd7..7b43741fde7c 100644 +--- a/include/configs/baltos.h ++++ b/include/configs/baltos.h +@@ -37,7 +37,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "setenv loadaddr 0x84000000; " \ +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +index 82acda595f09..8bad0f9ac4b6 100644 +--- a/include/configs/chiliboard.h ++++ b/include/configs/chiliboard.h +@@ -20,7 +20,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/etamin.h b/include/configs/etamin.h +index 9cf93924df93..1c0a86d1ed10 100644 +--- a/include/configs/etamin.h ++++ b/include/configs/etamin.h +@@ -113,7 +113,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h +index d09c2ab01610..0dc514f00684 100644 +--- a/include/configs/imx8mn_bsh_smm_s2.h ++++ b/include/configs/imx8mn_bsh_smm_s2.h +@@ -22,7 +22,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr_r} nanddtb; " \ +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h +index 08c4d52d658f..9f1a6cd51b40 100644 +--- a/include/configs/siemens-am33x-common.h ++++ b/include/configs/siemens-am33x-common.h +@@ -237,7 +237,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_active_ubi_vol_A=rootfs_a\0" \ + "nand_active_ubi_vol_B=rootfs_b\0" \ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_A=0x280000\0" \ + "nand_src_addr_B=0x780000\0" \ +@@ -314,7 +314,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h +index 57f013cbf846..133daecf7164 100644 +--- a/include/configs/ti_armv7_keystone2.h ++++ b/include/configs/ti_armv7_keystone2.h +@@ -180,7 +180,7 @@ + "sf write ${loadaddr} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${loadaddr} 0 ${filesize}\0" \ +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \ + KERNEL_MTD_PARTS \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h +index 11dcefcc41ca..7d00afa2b10f 100644 +--- a/include/environment/ti/nand.h ++++ b/include/environment/ti/nand.h +@@ -14,7 +14,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +-- +2.32.0 + diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file mode 100755 index 000000000000..49df4cd6fb10 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh @@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR} diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt new file mode 100644 index 000000000000..37081091e849 --- /dev/null +++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt @@ -0,0 +1,75 @@ +i.MX8MN BSH SMM S2 +================== + +This tutorial describes how to use the predefined Buildroot +configuration for the i.MX8MN BSH SMM S2 PRO board. + +Building +-------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ??? bl31.bin + ??? ddr3* + ??? flash.bin + ??? freescale/imx8mn-bsh-smm-s2.dtb + ??? Image + ??? nand-full.lst + ??? rootfs.ext2 + ??? rootfs.ext4 -> rootfs.ext2 + ??? rootfs.tar + ??? rootfs.ubifs + ??? u-boot.bin + ??? u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing +-------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ nand erase.chip + $ reset + +Flash the built images directly to board?s memory. On your computer, +run: + + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/ + +It will flash the bootloader, the Device Tree Blob, the kernel image +and the UBI root file system. diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig new file mode 100644 index 000000000000..7f6023c64b45 --- /dev/null +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches" +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_UUU=y -- 2.32.0 From peter at korsgaard.com Sat Oct 15 15:23:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/qdecoder: add QDECODER_CPE_ID_VENDOR In-Reply-To: <20221008170508.62837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:05:08 +0200") References: <20221008170508.62837-1-fontaine.fabrice@gmail.com> Message-ID: <878rlhi006.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:24:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/libinput: add LIBINPUT_CPE_ID_VENDOR In-Reply-To: <20221008173619.76606-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 8 Oct 2022 19:36:19 +0200") References: <20221008173619.76606-1-fontaine.fabrice@gmail.com> Message-ID: <874jw5hzz7.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:24:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR In-Reply-To: <20221008220716.150449-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:07:16 +0200") References: <20221008220716.150449-1-fontaine.fabrice@gmail.com> Message-ID: <87zgdxglem.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:25:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:25:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: add CPE variables In-Reply-To: <20221008221908.156459-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 00:19:08 +0200") References: <20221008221908.156459-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjpglbu.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE > identifier for this package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:23:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:15 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221015152619.EEA3B86D80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=03d8b05c12642368c4b0f9241882e2c536799a06 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d95faeea442796d0f79cae2bc666824955a668fe) Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:23:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:59 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221015152620.1A0AD86D82@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=616b1d017a5347b32e421d4e76ae8a2b14877000 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 6a184841bd293fd85c5691382da13cbd2068e798) Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 0268712399..02f7602b4c 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.7.2 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sat Oct 15 15:24:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:34 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/lrzip: add CPE variables Message-ID: <20221015152620.2EA8B86D80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e468e372f997d1ba3320e7f00a95199c466123f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400) Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sat Oct 15 15:23:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:54 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221015152620.096D186D81@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=15547176843494c60abb0cbb60000cda3f52ba77 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit db5c4a06a6da5e64268667c7c07aa4154fec6919) Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 1529411355..6cd298f3b3 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sat Oct 15 15:23:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:19 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/qdecoder: add QDECODER_CPE_ID_VENDOR Message-ID: <20221015152740.89FD786D90@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3c6d0889d18cad3db1bf39d41a18d9c2b76d1da4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:qdecoder_project:qdecoder is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aqdecoder_project%3Aqdecoder Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d95faeea442796d0f79cae2bc666824955a668fe) Signed-off-by: Peter Korsgaard --- package/qdecoder/qdecoder.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/qdecoder/qdecoder.mk b/package/qdecoder/qdecoder.mk index 05ee657131..c465617e26 100644 --- a/package/qdecoder/qdecoder.mk +++ b/package/qdecoder/qdecoder.mk @@ -8,6 +8,7 @@ QDECODER_VERSION = 12.1.0 QDECODER_SITE = $(call github,wolkykim,qdecoder,v$(QDECODER_VERSION)) QDECODER_LICENSE = BSD-2-Clause QDECODER_LICENSE_FILES = COPYING +QDECODER_CPE_ID_VENDOR = qdecoder_project QDECODER_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' QDECODER_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 15 15:23:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:23:50 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/libinput: add LIBINPUT_CPE_ID_VENDOR Message-ID: <20221015152740.953AF86D91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d2f7482db76ebd432c30cbc5f0a712aa11e2d63 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:freedesktop:libinput is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Afreedesktop%3Alibinput Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit db5c4a06a6da5e64268667c7c07aa4154fec6919) Signed-off-by: Peter Korsgaard --- package/libinput/libinput.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libinput/libinput.mk b/package/libinput/libinput.mk index 1529411355..6cd298f3b3 100644 --- a/package/libinput/libinput.mk +++ b/package/libinput/libinput.mk @@ -11,6 +11,7 @@ LIBINPUT_DEPENDENCIES = host-pkgconf libevdev mtdev udev LIBINPUT_INSTALL_STAGING = YES LIBINPUT_LICENSE = MIT LIBINPUT_LICENSE_FILES = COPYING +LIBINPUT_CPE_ID_VENDOR = freedesktop # Tests need fork, so just disable them everywhere. LIBINPUT_CONF_OPTS = -Dtests=false -Dlibwacom=false -Ddocumentation=false From peter at korsgaard.com Sat Oct 15 15:24:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:30 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/lrzip: add CPE variables Message-ID: <20221015152740.ADA3486D94@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7abdabe0efc2a8797dbc6f6db011f6977e89bfe1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:long_range_zip_project:long_range_zip is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Along_range_zip_project%3Along_range_zip Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit d09ff6fd1f16e017c0ff55e4fe76d5b0b00ba400) Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 409d9912d8..27d9fde204 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -9,6 +9,8 @@ LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING +LRZIP_CPE_ID_VENDOR = long_range_zip_project +LRZIP_CPE_ID_PRODUCT = long_range_zip LRZIP_DEPENDENCIES = zlib lz4 lzo bzip2 ifeq ($(BR2_i386)$(BR2_x86_64),y) From peter at korsgaard.com Sat Oct 15 15:24:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:24:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/timescaledb: add TIMESCALEDB_CPE_ID_VENDOR Message-ID: <20221015152740.A0E1B86D93@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=df640c3461b3dfc517ea56a08ad848b7808210e3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x cpe:2.3:a:timescale:timescaledb is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atimescale%3Atimescaledb Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 6a184841bd293fd85c5691382da13cbd2068e798) Signed-off-by: Peter Korsgaard --- package/timescaledb/timescaledb.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/timescaledb/timescaledb.mk b/package/timescaledb/timescaledb.mk index 1d8b2a69a7..cfad6b47f8 100644 --- a/package/timescaledb/timescaledb.mk +++ b/package/timescaledb/timescaledb.mk @@ -8,6 +8,7 @@ TIMESCALEDB_VERSION = 2.5.2 TIMESCALEDB_SITE = $(call github,timescale,timescaledb,$(TIMESCALEDB_VERSION)) TIMESCALEDB_LICENSE = Apache-2.0 TIMESCALEDB_LICENSE_FILES = LICENSE +TIMESCALEDB_CPE_ID_VENDOR = timescale TIMESCALEDB_DEPENDENCIES = postgresql From peter at korsgaard.com Sat Oct 15 15:28:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/openssh: security bump to version 9.1p1 In-Reply-To: <20221009210613.49541-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:06:13 +0200") References: <20221009210613.49541-1-fontaine.fabrice@gmail.com> Message-ID: <87o7udgl6w.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This release contains fixes for three minor memory safety problems. > None are believed to be exploitable, but we report most memory safety > problems as potential security vulnerabilities out of caution. > * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. > Reported by Qualys > * ssh-keygen(1): double free() in error path of file hashing step in > signing/verify code; GHPR333 > * ssh-keysign(8): double-free in error path introduced in openssh-8.9 > https://www.openssh.com/txt/release-9.1 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:29:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/vim: security bump to version 9.0.0709 In-Reply-To: <20221009212341.86425-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 9 Oct 2022 23:23:41 +0200") References: <20221009212341.86425-1-fontaine.fabrice@gmail.com> Message-ID: <87k051gl6q.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, > CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 > - Update hash of README.txt (Windows XP dropped with > https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:29:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/gnutls: bump to version 3.7.8 In-Reply-To: <20221009220250.310026-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Mon, 10 Oct 2022 00:02:50 +0200") References: <20221009220250.310026-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfpgl5g.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > This is a bug fix and enhancement release on the 3.7.x branch. > https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:30:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:46 +0200 Subject: [Buildroot] [PATCH] package/libmdbx: bump version to 0.11.12 In-Reply-To: <20221012204246.904703-1-leo@yuriev.ru> (=?utf-8?B?ItCb0LU=?= =?utf-8?B?0L7QvdC40LQg0K7RgNGM0LXQsg==?= (Leonid Yuriev)"'s message of "Wed, 12 Oct 2022 23:42:46 +0300") References: <20221012204246.904703-1-leo@yuriev.ru> Message-ID: <87bkqdgl3t.fsf@dell.be.48ers.dk> >>>>> "??????" == ?????? ????? (Leonid Yuriev) writes: > This is stable bugfix release of libmdbx. So it is reasonable to backport > this patch to all applicable releases/branches of Buildroot. > Release notes for v0.11.12 > -------------------------- > Fixes: > - Fixed static assertion failure on platforms where the `off_t` type is wider > than corresponding fields of `struct flock` used for file locking (backport). > Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. > - Fixed assertion check inside `page_retire_ex()` (backport). > Minors: > - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). > - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). > The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md > Signed-off-by: ?????? ????? (Leonid Yuriev) Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:32:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:32:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/bind: security bump to version 9.16.33 In-Reply-To: <20221001212114.11912-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:21:14 +0200") References: <20221001212114.11912-1-fontaine.fabrice@gmail.com> Message-ID: <877d11gl1a.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) > - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) > - Fix serve-stale crash that could happen when > stale-answer-client-timeout was set to 0 and there was a stale CNAME > in the cache for an incoming query. (CVE-2022-3080) > - Prevent excessive resource use while processing large delegations. > (CVE-2022-2795) > https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:36:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:41 +0200 Subject: [Buildroot] [PATCH 2/2] package/iwd: no autoreconfigure In-Reply-To: (Lang Daniel via buildroot's message of "Thu, 13 Oct 2022 15:03:08 +0000") References: Message-ID: <8735bpgkty.fsf@dell.be.48ers.dk> >>>>> "Lang" == Lang Daniel via buildroot writes: > configure.ac is no longer patched, autoreconfigure isn't needed. > Signed-off-by: Daniel Lang Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:28:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:41 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/vim: security bump to version 9.0.0709 Message-ID: <20221015153717.B564B86DB5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7e444acba528201d04e6532d31b633d79b6371a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit c2940513298fdb5a6e582916128e914243c784f5) Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Sat Oct 15 15:29:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:39 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/gnutls: bump to version 3.7.8 Message-ID: <20221015153717.BFB6486DB6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=180f2cdffce411a3c84888d667b514739e8fbcbd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 2acba99893cbe76926229f00e333b444a5570c6d) Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index dece16140d..0010f91fca 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Sat Oct 15 15:30:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:14 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/libmdbx: bump version to 0.11.12 Message-ID: <20221015153717.CAE3F86DB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=956de5414111988fb2ea6ade373022b5a83baca7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard (cherry picked from commit dd2ded3355c01f333c18dc16e7d9a3c496007960) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 15:31:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:31:59 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/bind: bump version to 9.16.31 Message-ID: <20221015153717.D5D4086DB9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3223b8f5c1285516f088371888ed0315e3da52ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Petr Vorel Signed-off-by: Thomas Petazzoni (cherry picked from commit 8d11c2dbb8fc1899571d6c8991b22b3ca1539c78) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 2c10a0429b..171edc8806 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.27/bind-9.16.27.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 90902aaf104c81019d75d6f8b2f7ec40fcd249406f894b44e4a9c6b5e08bf566 bind-9.16.27.tar.xz +sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index bd12f7ad31..5e8d9d5033 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.27 +BIND_VERSION = 9.16.31 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:36:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:23 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/iwd: no autoreconfigure Message-ID: <20221015153717.ECD9A86DB6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=447c0aba40120f75e001b0e0608ecdae1533ecf7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN (cherry picked from commit 1db79dffcae63dbed021143203f1908f3f7db33f) Signed-off-by: Peter Korsgaard --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 548b508edb..6814a04bf8 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From peter at korsgaard.com Sat Oct 15 15:32:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:32:06 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/bind: security bump to version 9.16.33 Message-ID: <20221015153717.E193486DB5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66a3f84b573a710ba9384121812f14091e01ca08 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index 5e8d9d5033..cfacf0e56b 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:29:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:29:31 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/gnutls: bump to version 3.7.8 Message-ID: <20221015153823.658BF86DD0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0777bd794d6dac764e5f0fe6b49dc5f6bd4850f0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is a bug fix and enhancement release on the 3.7.x branch. https://lists.gnupg.org/pipermail/gnutls-help/2022-September/004765.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 2acba99893cbe76926229f00e333b444a5570c6d) Signed-off-by: Peter Korsgaard --- package/gnutls/gnutls.hash | 4 ++-- package/gnutls/gnutls.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gnutls/gnutls.hash b/package/gnutls/gnutls.hash index 46dd99291c..303f1351e0 100644 --- a/package/gnutls/gnutls.hash +++ b/package/gnutls/gnutls.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.7.tar.xz.sig -sha256 be9143d0d58eab64dba9b77114aaafac529b6c0d7e81de6bdf1c9b59027d2106 gnutls-3.7.7.tar.xz +# https://www.gnupg.org/ftp/gcrypt/gnutls/v3.7/gnutls-3.7.8.tar.xz.sig +sha256 c58ad39af0670efe6a8aee5e3a8b2331a1200418b64b7c51977fb396d4617114 gnutls-3.7.8.tar.xz # Locally calculated sha256 e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b doc/COPYING sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 doc/COPYING.LESSER diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk index 56dae4c6b7..6e2cc501ef 100644 --- a/package/gnutls/gnutls.mk +++ b/package/gnutls/gnutls.mk @@ -6,7 +6,7 @@ # When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS GNUTLS_VERSION_MAJOR = 3.7 -GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).7 +GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).8 GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz GNUTLS_SITE = https://www.gnupg.org/ftp/gcrypt/gnutls/v$(GNUTLS_VERSION_MAJOR) GNUTLS_LICENSE = LGPL-2.1+ (core library) From peter at korsgaard.com Sat Oct 15 15:28:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:28:46 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/vim: security bump to version 9.0.0709 Message-ID: <20221015153823.5A10386DCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=406d740c8a1e87eec8badbc0c60d7fac0d61ef93 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix CVE-2022-3234, CVE-2022-3235, CVE-2022-3256, CVE-2022-3278, CVE-2022-3296, CVE-2022-3297, CVE-2022-3324 and CVE-2022-3352 - Update hash of README.txt (Windows XP dropped with https://github.com/vim/vim/commit/27b53be3a6a340f1858bcd31233fe2efc86f8e15) Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit c2940513298fdb5a6e582916128e914243c784f5) Signed-off-by: Peter Korsgaard --- package/vim/vim.hash | 4 ++-- package/vim/vim.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/vim/vim.hash b/package/vim/vim.hash index 0c6b720dd1..ef3bc46cdc 100644 --- a/package/vim/vim.hash +++ b/package/vim/vim.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 b90063706a2a9ee234275e0dd4b71a11e24867c33203c432fd6e9799fdc3bff9 vim-9.0.0453.tar.gz +sha256 f50ab9c023e7c276a61a7076c840d36254ce83691dba28af9ac5c513b6ace3b4 vim-9.0.0709.tar.gz sha256 0bcab3b635dd39208c42b496568d1e8171dad247cf3da5bab3d750c9d5883499 LICENSE -sha256 4afae7c984ab1a4ccd0b474a695f316e7435ab6ed46537648af925c18835d853 README.txt +sha256 de04910387a62ad4f9b36b91457c8d5ef32733ac5d768a128071b93f4821fcd1 README.txt diff --git a/package/vim/vim.mk b/package/vim/vim.mk index 3f1985f036..22c1eb91a8 100644 --- a/package/vim/vim.mk +++ b/package/vim/vim.mk @@ -4,7 +4,7 @@ # ################################################################################ -VIM_VERSION = 9.0.0453 +VIM_VERSION = 9.0.0709 VIM_SITE = $(call github,vim,vim,v$(VIM_VERSION)) VIM_DEPENDENCIES = ncurses $(TARGET_NLS_DEPENDENCIES) VIM_SUBDIR = src From peter at korsgaard.com Sat Oct 15 15:27:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:27:52 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/openssh: security bump to version 9.1p1 Message-ID: <20221015153823.4F72586DCE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ef0daa817d93903379eb544d21704b8cffb31b60 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This release contains fixes for three minor memory safety problems. None are believed to be exploitable, but we report most memory safety problems as potential security vulnerabilities out of caution. * ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing. Reported by Qualys * ssh-keygen(1): double free() in error path of file hashing step in signing/verify code; GHPR333 * ssh-keysign(8): double-free in error path introduced in openssh-8.9 https://www.openssh.com/txt/release-9.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa) Signed-off-by: Peter Korsgaard --- package/openssh/openssh.hash | 4 ++-- package/openssh/openssh.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 4cfdb91484..81cea32d2c 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ -# From https://www.openssh.com/txt/release-9.0 (base64 encoded) -sha256 03974302161e9ecce32153cfa10012f1e65c8f3750f573a73ab1befd5972a28a openssh-9.0p1.tar.gz +# From https://www.openssh.com/txt/release-9.1 (base64 encoded) +sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE diff --git a/package/openssh/openssh.mk b/package/openssh/openssh.mk index 0e4253fa74..b70e327620 100644 --- a/package/openssh/openssh.mk +++ b/package/openssh/openssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -OPENSSH_VERSION_MAJOR = 9.0 +OPENSSH_VERSION_MAJOR = 9.1 OPENSSH_VERSION_MINOR = p1 OPENSSH_VERSION = $(OPENSSH_VERSION_MAJOR)$(OPENSSH_VERSION_MINOR) OPENSSH_CPE_ID_VERSION = $(OPENSSH_VERSION_MAJOR) From peter at korsgaard.com Sat Oct 15 15:36:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:36:14 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/iwd: no autoreconfigure Message-ID: <20221015153823.878DE86DCF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=444611a9a12dd81635a635a994b4718afcc3cfdd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Since commit ff0d53405157 (package/iwd: bump version to 1.19), we are no longer patching configure.ac, so autoreconfigure isn't needed anymore. Signed-off-by: Daniel Lang [yann.morin.1998 at free.fr: reword with reference to ff0d53405157] Signed-off-by: Yann E. MORIN (cherry picked from commit 1db79dffcae63dbed021143203f1908f3f7db33f) Signed-off-by: Peter Korsgaard --- package/iwd/iwd.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index fc10c5f1d4..d179e46ebf 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -12,8 +12,6 @@ IWD_LICENSE_FILES = COPYING IWD_CPE_ID_VENDOR = intel IWD_CPE_ID_PRODUCT = inet_wireless_daemon IWD_SELINUX_MODULES = networkmanager -# We're patching configure.ac -IWD_AUTORECONF = YES IWD_CONF_OPTS = \ --disable-manual-pages \ From peter at korsgaard.com Sat Oct 15 15:31:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:31:02 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/bind: security bump to version 9.16.33 Message-ID: <20221015153823.7A76386DD2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0b74bc5ead7844b639d383a804c6793e1dd48613 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - Fix memory leak in EdDSA verify processing. (CVE-2022-38178) - Fix memory leak in ECDSA verify processing. (CVE-2022-38177) - Fix serve-stale crash that could happen when stale-answer-client-timeout was set to 0 and there was a stale CNAME in the cache for an incoming query. (CVE-2022-3080) - Prevent excessive resource use while processing large delegations. (CVE-2022-2795) https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 8c31f3b50f7c41f4e79b57a4ff4a1e430367bc63) Signed-off-by: Peter Korsgaard --- package/bind/bind.hash | 4 ++-- package/bind/bind.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bind/bind.hash b/package/bind/bind.hash index 171edc8806..d41a9bbc5e 100644 --- a/package/bind/bind.hash +++ b/package/bind/bind.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/bind9/9.16.31/bind-9.16.31.tar.xz.asc +# Verified from https://ftp.isc.org/isc/bind9/9.16.33/bind-9.16.33.tar.xz.asc # with key AADBBA5074F1402F7B69D56BC5B4EE931A9F9DFD -sha256 8ca2cb6c37b605c70f7a25f0cf8a94d2040e025824db2341b92625efd96e7cfb bind-9.16.31.tar.xz +sha256 ec4fbea4b2e368d1824971509e33fa159224ad14b436034c6bcd46104c328d91 bind-9.16.33.tar.xz sha256 daf6f1eddf5983ed664a2d125b619e56e2e93917c19d0d41c7586ea153ba2155 COPYRIGHT diff --git a/package/bind/bind.mk b/package/bind/bind.mk index e5bf2be318..2f83a6276e 100644 --- a/package/bind/bind.mk +++ b/package/bind/bind.mk @@ -4,7 +4,7 @@ # ################################################################################ -BIND_VERSION = 9.16.31 +BIND_VERSION = 9.16.33 BIND_SOURCE= bind-$(BIND_VERSION).tar.xz BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION) # bind does not support parallel builds. From peter at korsgaard.com Sat Oct 15 15:30:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:30:17 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/libmdbx: bump version to 0.11.12 Message-ID: <20221015153823.7040686DD1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6112142aa044cc1648ec32665ca2fafad0a84702 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x This is stable bugfix release of libmdbx. So it is reasonable to backport this patch to all applicable releases/branches of Buildroot. Release notes for v0.11.12 -------------------------- Fixes: - Fixed static assertion failure on platforms where the `off_t` type is wider than corresponding fields of `struct flock` used for file locking (backport). Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available. - Fixed assertion check inside `page_retire_ex()` (backport). Minors: - Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport). - Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport). The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md Signed-off-by: ???????????? ?????????? (Leonid Yuriev) Signed-off-by: Peter Korsgaard (cherry picked from commit dd2ded3355c01f333c18dc16e7d9a3c496007960) Signed-off-by: Peter Korsgaard --- package/libmdbx/libmdbx.hash | 2 +- package/libmdbx/libmdbx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libmdbx/libmdbx.hash b/package/libmdbx/libmdbx.hash index c4d9c8d8ce..79af189633 100644 --- a/package/libmdbx/libmdbx.hash +++ b/package/libmdbx/libmdbx.hash @@ -1,5 +1,5 @@ # Hashes from: https://libmdbx.dqdkfa.ru/release/SHA256SUMS -sha256 d2c81db716a33d007cc75702ecf3c45cfb7c33a2261fbacced6945204ece1b67 libmdbx-amalgamated-0.11.11.tar.xz +sha256 dde8f3626509bb764b17c93fe0629389625cb50362502eb1c27ca208342f3894 libmdbx-amalgamated-0.11.12.tar.xz # Locally calculated sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569 LICENSE diff --git a/package/libmdbx/libmdbx.mk b/package/libmdbx/libmdbx.mk index 357b1bac9e..ac1a3a0d6f 100644 --- a/package/libmdbx/libmdbx.mk +++ b/package/libmdbx/libmdbx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMDBX_VERSION = 0.11.11 +LIBMDBX_VERSION = 0.11.12 LIBMDBX_SOURCE = libmdbx-amalgamated-$(LIBMDBX_VERSION).tar.xz LIBMDBX_SITE = https://libmdbx.dqdkfa.ru/release LIBMDBX_SUPPORTS_IN_SOURCE_BUILD = NO From peter at korsgaard.com Sat Oct 15 15:40:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:40:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 In-Reply-To: <20221014220748.14254-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:07:48 +0200") References: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Message-ID: <87y1thf63u.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-39282 and CVE-2022-39283 > https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:40:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:40:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 In-Reply-To: <20221014222051.48942-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:20:51 +0200") References: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Message-ID: <87tu45f63o.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service fixes: > Evgeny Vereshchagin discovered several ways in which an authenticated > local attacker could cause a crash (denial of service) in > dbus-daemon --system or a custom DBusServer. In uncommon configurations > these could potentially be carried out by an authenticated remote > attacker. > ? An invalid array of fixed-length elements where the length of the > array is not a multiple of the length of the element would cause an > assertion failure in debug builds or an out-of-bounds read in > production builds. This was a regression in version 1.3.0. > (dbus#413, CVE-2022-42011; Simon McVittie) > ? A syntactically invalid type signature with incorrectly nested > parentheses and curly brackets would cause an assertion failure in > debug builds. Similar messages could potentially result in a crash or > incorrect message processing in a production build, although we are > not aware of a practical example. (dbus#418, CVE-2022-42010; > Simon McVittie) > ? A message in non-native endianness with out-of-band Unix file > descriptors would cause a use-after-free and possible memory > corruption in production builds, or an assertion failure in debug > builds. This was a regression in version 1.3.0. (dbus#417, > CVE-2022-42012; Simon McVittie) > https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:39:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:39:49 +0200 Subject: [Buildroot] [git commit] package/dbus: security bump to version 1.12.24 Message-ID: <20221015154123.6A18086DE1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=29586aed965844ffb35b4d859e02f6973a67f33c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From peter at korsgaard.com Sat Oct 15 15:39:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:39:22 +0200 Subject: [Buildroot] [git commit] package/freerdp: security bump to version 2.8.1 Message-ID: <20221015154123.60B0186DE0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1e37cfd2dcc867e71519439e3cd9c630866b6140 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Sat Oct 15 15:42:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:42:50 +0200 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> (Damien Le Moal via buildroot's message of "Thu, 13 Oct 2022 16:56:46 +0900") References: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Message-ID: <87pmetf5z9.fsf@dell.be.48ers.dk> >>>>> "Damien" == Damien Le Moal via buildroot writes: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:42:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:42:39 +0200 Subject: [Buildroot] [git commit] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221015154300.63F5986DE8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=959e9f7fdef4d8b602740312649016245209ce73 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal Signed-off-by: Peter Korsgaard --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index 8a19996090..34769eeca8 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index d3d0f405e1..62f6a0e0b8 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index 75300997b8..6c61e3aaaf 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index add9369747..da8cbe45f9 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -50,6 +50,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y From peter at korsgaard.com Sat Oct 15 15:43:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:43:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/fluidsynth: bump to version 2.3.0 In-Reply-To: <20220926195340.583318-1-ju.o@free.fr> (Julien Olivain's message of "Mon, 26 Sep 2022 21:53:40 +0200") References: <20220926195340.583318-1-ju.o@free.fr> Message-ID: <87lephf5xq.fsf@dell.be.48ers.dk> >>>>> "Julien" == Julien Olivain writes: > For change log since v2.2.9, see: > - https://github.com/FluidSynth/fluidsynth/releases/tag/v2.3.0 > Signed-off-by: Julien Olivain > --- > Tested commit 358f4a0 with commands: > make check-package > ... > 0 warnings generated > ./utils/test-pkg -p fluidsynth > ... > 6 builds, 2 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:43:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:43:29 +0200 Subject: [Buildroot] [git commit] package/fluidsynth: bump to version 2.3.0 Message-ID: <20221015154401.79B8486DF0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9c4d4f4ac076df7e3453fb14721fdc00fb722b66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For change log since v2.2.9, see: - https://github.com/FluidSynth/fluidsynth/releases/tag/v2.3.0 Signed-off-by: Julien Olivain Signed-off-by: Peter Korsgaard --- package/fluidsynth/fluidsynth.hash | 2 +- package/fluidsynth/fluidsynth.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/fluidsynth/fluidsynth.hash b/package/fluidsynth/fluidsynth.hash index b1e9f08bbf..fdb0cf4117 100644 --- a/package/fluidsynth/fluidsynth.hash +++ b/package/fluidsynth/fluidsynth.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 bc62494ec2554fdcfc01512a2580f12fc1e1b01ce37a18b370dd7902af7a8159 fluidsynth-2.2.9.tar.gz +sha256 1df5a1afb91acf3b945b7fdb89ac0d99877622161d9b5155533da59113eaaa20 fluidsynth-2.3.0.tar.gz sha256 9b872a8a070b8ad329c4bd380fb1bf0000f564c75023ec8e1e6803f15364b9e9 LICENSE diff --git a/package/fluidsynth/fluidsynth.mk b/package/fluidsynth/fluidsynth.mk index 32fb88144e..20fbb644f5 100644 --- a/package/fluidsynth/fluidsynth.mk +++ b/package/fluidsynth/fluidsynth.mk @@ -4,7 +4,7 @@ # ################################################################################ -FLUIDSYNTH_VERSION = 2.2.9 +FLUIDSYNTH_VERSION = 2.3.0 FLUIDSYNTH_SITE = $(call github,FluidSynth,fluidsynth,v$(FLUIDSYNTH_VERSION)) FLUIDSYNTH_LICENSE = LGPL-2.1+ FLUIDSYNTH_LICENSE_FILES = LICENSE From peter at korsgaard.com Sat Oct 15 15:44:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:44:58 +0200 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git In-Reply-To: (Waldemar Brodkorb's message of "Sun, 2 Oct 2022 13:59:59 +0200") References: Message-ID: <87h705f5vp.fsf@dell.be.48ers.dk> >>>>> "Waldemar" == Waldemar Brodkorb writes: > Fixes a musl autobuild compile error, see > http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ > Signed-off-by: Waldemar Brodkorb Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:44:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:44:53 +0200 Subject: [Buildroot] [git commit] package/uclibc-ng-test: update to latest git Message-ID: <20221015154510.97D9686DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=616347a163a940f78300d980353e831a39095f3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Sat Oct 15 15:45:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:45:56 +0200 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:53 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <87czatf5u3.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:46:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:14 +0200 Subject: [Buildroot] [PATCH 2/2] package/hdparm: bump version to 9.65 In-Reply-To: <20221002143354.1909295-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:54 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> <20221002143354.1909295-2-bernd.kuhls@t-online.de> Message-ID: <878rlhf5tl.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://sourceforge.net/p/hdparm/news/ > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:45:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:45:46 +0200 Subject: [Buildroot] [git commit] package/hdparm: Fix sha256 tarball hash Message-ID: <20221015154645.4450D86E09@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=25f45d54aa0936bac685cb96bf81165d461284f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Sat Oct 15 15:46:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:05 +0200 Subject: [Buildroot] [git commit] package/hdparm: bump version to 9.65 Message-ID: <20221015154645.4E54086DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7131dee4b6d73c434b328b3b6b0e95d3f21ae956 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://sourceforge.net/p/hdparm/news/ Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 4 ++-- package/hdparm/hdparm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index b86afc7cfe..1d73585232 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ -sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz +sha1 3bc0916493f2f485c6371ec0fd16418d0e1fa636 hdparm-9.65.tar.gz # Locally computed -sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz +sha256 d14929f910d060932e717e9382425d47c2e7144235a53713d55a94f7de535a4b hdparm-9.65.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT diff --git a/package/hdparm/hdparm.mk b/package/hdparm/hdparm.mk index 2c3b372deb..3c8b77e5eb 100644 --- a/package/hdparm/hdparm.mk +++ b/package/hdparm/hdparm.mk @@ -4,7 +4,7 @@ # ################################################################################ -HDPARM_VERSION = 9.63 +HDPARM_VERSION = 9.65 HDPARM_SITE = https://downloads.sourceforge.net/project/hdparm/hdparm HDPARM_LICENSE = BSD-Style HDPARM_LICENSE_FILES = LICENSE.TXT From peter at korsgaard.com Sat Oct 15 15:47:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:47:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: bump to version 1.16.1 In-Reply-To: <20221001214156.37988-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 1 Oct 2022 23:41:56 +0200") References: <20221001214156.37988-1-fontaine.fabrice@gmail.com> Message-ID: <874jw5f5s7.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Refresh patch > https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 > https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 15:46:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 17:46:53 +0200 Subject: [Buildroot] [git commit] package/libdnet: bump to version 1.16.1 Message-ID: <20221015154840.809C786E14@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c8ed72c15d39cc6c676485bff8955ac5f4258138 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Refresh patch https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16 https://github.com/ofalk/libdnet/releases/tag/libdnet-1.16.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdnet/0001-python-makefile.patch | 6 ++++-- package/libdnet/libdnet.hash | 2 +- package/libdnet/libdnet.mk | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/libdnet/0001-python-makefile.patch b/package/libdnet/0001-python-makefile.patch index eae22b2f14..e5526482ed 100644 --- a/package/libdnet/0001-python-makefile.patch +++ b/package/libdnet/0001-python-makefile.patch @@ -6,6 +6,8 @@ Subject: [PATCH] python makefile Signed-off-by: Peter Korsgaard [adam: refresh for 1.14; make it git-formatted] Signed-off-by: Adam Duskett +[Fabrice: updated for 1.16.1] +Signed-off-by: Fabrice Fontaine --- python/Makefile.am | 1 + 1 file changed, 1 insertion(+) @@ -15,9 +17,9 @@ index 1a74ef2..59fe0f3 100644 --- a/python/Makefile.am +++ b/python/Makefile.am @@ -11,6 +11,7 @@ $(srcdir)/dnet.c: $(srcdir)/dnet.pyx - pyrexc $(srcdir)/dnet.pyx - python-build: $(srcdir)/dnet.c + + python-build: + CC="$(CC)" LDSHARED="$(CC) -shared" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" $(PYTHON) setup.py build_ext -I$(PYINCDIR) -L$(PYLIBDIR) $(PYTHON) setup.py build touch python-build diff --git a/package/libdnet/libdnet.hash b/package/libdnet/libdnet.hash index d322a1cc29..c31ec90596 100644 --- a/package/libdnet/libdnet.hash +++ b/package/libdnet/libdnet.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 592599c54a57102a177270f3a2caabda2c2ac7768b977d7458feba97da923dfe libdnet-1.14.tar.gz +sha256 b151c4913758ef80daf4558361b4f2680a37b01d59272625bb78c77183062c63 libdnet-1.16.1.tar.gz sha256 6b46ec86e290066c47b6607d322135b3c473566e7225ac23d35a7c0588a82da6 LICENSE diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 4c58ea20a5..1e75dae323 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDNET_VERSION = 1.14 +LIBDNET_VERSION = 1.16.1 LIBDNET_SITE = $(call github,ofalk,libdnet,libdnet-$(LIBDNET_VERSION)) LIBDNET_LICENSE = BSD-3-Clause LIBDNET_LICENSE_FILES = LICENSE From peter at korsgaard.com Sat Oct 15 16:41:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:41:36 +0200 Subject: [Buildroot] [PATCH v4 1/1] boot/uboot/uboot.mk: add pmufw.elf support In-Reply-To: <20221013064931.60174-1-neal.frager@amd.com> (Neal Frager's message of "Thu, 13 Oct 2022 00:49:31 -0600") References: <20221013064931.60174-1-neal.frager@amd.com> Message-ID: <87zgdxdoov.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch adds support for zynqmp pmufw.elf files. > It will allow buildroot to use pmufw.elf binaries directly > from the Xilinx git repository built by petalinux in > addition to still supporting pmufw.bin binaries built > by the zynqmp-pmufw-builder. > https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware > Signed-off-by: Neal Frager > --- V1-> V2: > - corrected objcopy instruction for converting elf to bin V2-> V3: > - removed unnecessary spaces > - simplified if statement to check for a pmufw.elf file V3-> V4: > - added spaces around = sign of UBOOT_ZYNQMP_PMUFW_BASENAME definition Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 16:39:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:39:24 +0200 Subject: [Buildroot] [git commit] boot/uboot/uboot.mk: add pmufw.elf support Message-ID: <20221015164658.F1ECD81E67@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d07e6b7071cf9496aa67b2459d0574bc5ffd9c46 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch adds support for zynqmp pmufw.elf files. It will allow buildroot to use pmufw.elf binaries directly from the Xilinx git repository built by petalinux in addition to still supporting pmufw.bin binaries built by the zynqmp-pmufw-builder. https://github.com/Xilinx/ubuntu-firmware/tree/v2022.1_22.04_1/xlnx-firmware Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- boot/uboot/uboot.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index a9f9b1bf16..0439ec5e4b 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -391,9 +391,12 @@ UBOOT_ZYNQMP_PMUFW_PATH = $(UBOOT_DL_DIR)/$(notdir $(UBOOT_ZYNQMP_PMUFW)) else ifneq ($(UBOOT_ZYNQMP_PMUFW),) UBOOT_ZYNQMP_PMUFW_PATH = $(shell readlink -f $(UBOOT_ZYNQMP_PMUFW)) endif +UBOOT_ZYNQMP_PMUFW_BASENAME = $(basename $(UBOOT_ZYNQMP_PMUFW_PATH)) define UBOOT_ZYNQMP_KCONFIG_PMUFW - $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_PATH)") + $(if $(filter %.elf,$(UBOOT_ZYNQMP_PMUFW_PATH)), + objcopy -O binary -I elf32-little $(UBOOT_ZYNQMP_PMUFW_BASENAME).elf $(UBOOT_ZYNQMP_PMUFW_BASENAME).bin) + $(call KCONFIG_SET_OPT,CONFIG_PMUFW_INIT_FILE,"$(UBOOT_ZYNQMP_PMUFW_BASENAME).bin") endef UBOOT_ZYNQMP_PM_CFG = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQMP_PM_CFG)) From peter at korsgaard.com Sat Oct 15 16:49:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:49:57 +0200 Subject: [Buildroot] [PATCH] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series In-Reply-To: <20221014151028.3843939-1-peter@korsgaard.com> (Peter Korsgaard's message of "Fri, 14 Oct 2022 17:10:27 +0200") References: <20221014151028.3843939-1-peter@korsgaard.com> Message-ID: <87v8oldoay.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Signed-off-by: Peter Korsgaard > --- > linux/Config.in | 2 +- > linux/linux.hash | 15 +++++++-------- > package/linux-headers/Config.in.host | 16 ++++++++-------- > 3 files changed, 16 insertions(+), 17 deletions(-) > diff --git a/linux/Config.in b/linux/Config.in > index f9caa3c652..ee59761f33 100644 > --- a/linux/Config.in > +++ b/linux/Config.in > @@ -128,7 +128,7 @@ endif > config BR2_LINUX_KERNEL_VERSION > string > - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION > + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION > default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION > default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION > default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ > diff --git a/linux/linux.hash b/linux/linux.hash > index 07963f185e..e1fd0feb44 100644 > --- a/linux/linux.hash > +++ b/linux/linux.hash > @@ -1,15 +1,14 @@ > # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc > -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz > +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz > # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc > -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz > -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz > +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz > sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz Committed after fixing the hash for 5.15.73, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 15 16:49:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 15 Oct 2022 18:49:27 +0200 Subject: [Buildroot] [git commit] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221015165016.1CD1C82A98@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 17 ++++++++--------- package/linux-headers/Config.in.host | 16 ++++++++-------- 3 files changed, 17 insertions(+), 18 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index f9caa3c652..ee59761f33 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "6.0" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.0.1" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.145-cip17" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.145-cip17-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 07963f185e..c4ee15c37b 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,15 +1,14 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 5c2443a5538de52688efb55c27ab0539c1f5eb58c0cfd16a2b9fbb08fd81788e linux-6.0.tar.xz +sha256 8ede745a69351ea0f27fe0c48780d4efa37ff086135e129358ce09694957e8f9 linux-6.0.1.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc -sha256 4ecdb8b59c6f6f258d89cbf22eede210e0a55c09db884988fe706efe2fe8f148 linux-5.19.13.tar.xz -sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 4686e33847db3ec58e1043bc0c806472aae694b2c413bb7d8da91a5c9a55eb1b linux-5.19.15.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 4594c147bdc493c7c286688542bbe65e550fb7bd58e0649ec587a2fe893ec0ee linux-cip-5.10.145-cip17.tar.gz sha256 a5598f7f673b3ef819d6ed24f08d539eecb6febd11673a1d4752a1c05d4ee289 linux-cip-5.10.145-cip17-rt7.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 7aee67de56..8679241a2c 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -392,14 +392,14 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 - default "5.19.13" if BR2_KERNEL_HEADERS_5_19 - default "6.0" if BR2_KERNEL_HEADERS_6_0 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 + default "5.19.15" if BR2_KERNEL_HEADERS_5_19 + default "6.0.1" if BR2_KERNEL_HEADERS_6_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \ From james.hilliard1 at gmail.com Sat Oct 15 17:09:08 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 11:09:08 -0600 Subject: [Buildroot] [PATCH 1/1] package/brltty: fix infinite loop in configure Message-ID: <20221015170908.1494436-1-james.hilliard1@gmail.com> Revert a broken commit that introduced an infinite loop during configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard --- ...ushProgramTerminationCommand-shell-f.patch | 107 ++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch diff --git a/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch b/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch new file mode 100644 index 0000000000..f5653342e2 --- /dev/null +++ b/package/brltty/0002-Revert-Add-the-pushProgramTerminationCommand-shell-f.patch @@ -0,0 +1,107 @@ +From 941acbb1caa8a85454a491364e74fb273223b7fb Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Sat, 15 Oct 2022 10:54:57 -0600 +Subject: [PATCH] Revert "Add the pushProgramTerminationCommand shell function. + (dm)" + +Fixes infinite loop during configure: + +config.status: executing build-configure commands +configure: WARNING: libudev support not available +configure: WARNING: Human Interface Device I/O support not available on this platform +./mk4build: 104: let: not found +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF +./mk4build: 104: let: not found +./mk4build: 111: cd: can't cd to /tmp/mk4build.20221015-092924.ZL6KlF + +This reverts commit df1e070d30f583381b48fddd829bdde8efcdd16a. + +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/brltty/brltty/pull/393] +--- + brltty-prologue.sh | 48 +++++++++++++--------------------------------- + 1 file changed, 13 insertions(+), 35 deletions(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..a4fa34053 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -94,41 +94,6 @@ logDetail() { + logMessage detail "${@}" + } + +-programTerminationCommandCount=0 +- +-runProgramTerminationCommands() { +- set +e +- +- while [ "${programTerminationCommandCount}" -gt 0 ] +- do +- set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" +- +- local process="${1}" +- local directory="${2}" +- shift 2 +- +- [ "${process}" = "${$}" ] && { +- cd "${directory}" +- "${@}" +- } +- done +-} +- +-pushProgramTerminationCommand() { +- [ "${programTerminationCommandCount}" -gt 0 ] || trap runProgramTerminationCommands exit +- setVariable "programTerminationCommand$((programTerminationCommandCount += 1))" "${$} $(pwd) ${*}" +-} +- +-needTemporaryDirectory() { +- [ -n "${temporaryDirectory}" ] || { +- umask 022 +- [ -n "${TMPDIR}" -a -d "${TMPDIR}" -a -r "${TMPDIR}" -a -w "${TMPDIR}" -a -x "${TMPDIR}" ] || export TMPDIR="/tmp" +- temporaryDirectory="$(mktemp -d "${TMPDIR}/${programName}.$(date +"%Y%m%d-%H%M%S").XXXXXX")" && cd "${temporaryDirectory}" || exit "${?}" +- pushProgramTerminationCommand rm -f -r -- "${temporaryDirectory}" +- } +-} +- + resolveDirectory() { + local path="${1}" + local variable="${2}" +@@ -512,6 +477,19 @@ verifyOutputDirectory() { + fi + } + ++needTemporaryDirectory() { ++ cleanup() { ++ set +e ++ cd / ++ [ -z "${temporaryDirectory}" ] || rm -f -r -- "${temporaryDirectory}" ++ } ++ trap "cleanup" 0 ++ ++ umask 022 ++ [ -n "${TMPDIR}" -a -d "${TMPDIR}" -a -r "${TMPDIR}" -a -w "${TMPDIR}" -a -x "${TMPDIR}" ] || export TMPDIR="/tmp" ++ temporaryDirectory="$(mktemp -d "${TMPDIR}/${programName}.XXXXXX")" && cd "${temporaryDirectory}" || exit "${?}" ++} ++ + programParameterCount=0 + programParameterCountMinimum=-1 + programParameterLabelWidth=0 +-- +2.34.1 + -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 19:14:33 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 13:14:33 -0600 Subject: [Buildroot] [PATCH 1/1] package/wayland-protocols: bump to version 1.27 Message-ID: <20221015191433.1504189-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/wayland-protocols/wayland-protocols.hash | 7 +++---- package/wayland-protocols/wayland-protocols.mk | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/package/wayland-protocols/wayland-protocols.hash b/package/wayland-protocols/wayland-protocols.hash index 2d98c47c6f..4717523dc2 100644 --- a/package/wayland-protocols/wayland-protocols.hash +++ b/package/wayland-protocols/wayland-protocols.hash @@ -1,5 +1,4 @@ -# From https://lists.freedesktop.org/archives/wayland-devel/2022-July/042270.html -md5 0c6b3e037f3881650d9a53610dd235c7 wayland-protocols-1.26.tar.xz -sha1 8aeb1a629d847ec26e26d5a59c150add41e482bd wayland-protocols-1.26.tar.xz -sha256 c553384c1c68afd762fa537a2569cc9074fe7600da12d3472761e77a2ba56f13 wayland-protocols-1.26.tar.xz +# From https://lists.freedesktop.org/archives/wayland-devel/2022-October/042466.html +sha256 9046f10a425d4e2a00965a03acfb6b3fb575a56503ac72c2b86821c69653375c wayland-protocols-1.27.tar.xz +sha512 c0a49bc46c663c9f602998dfe2e184c09756790fbcc7acbc2bf9d9cf8f7d6dcdd00259b768222a30e5d134e6f97f7f4faf252947b544e8b32f53278b70da0390 wayland-protocols-1.27.tar.xz sha256 f1a2b233e8a9a71c40f4aa885be08a0842ac85bb8588703c1dd7e6e6502e3124 COPYING diff --git a/package/wayland-protocols/wayland-protocols.mk b/package/wayland-protocols/wayland-protocols.mk index 8e6d72480f..2510d7c04e 100644 --- a/package/wayland-protocols/wayland-protocols.mk +++ b/package/wayland-protocols/wayland-protocols.mk @@ -4,8 +4,8 @@ # ################################################################################ -WAYLAND_PROTOCOLS_VERSION = 1.26 -WAYLAND_PROTOCOLS_SITE = https://wayland.freedesktop.org/releases +WAYLAND_PROTOCOLS_VERSION = 1.27 +WAYLAND_PROTOCOLS_SITE = https://gitlab.freedesktop.org/wayland/wayland-protocols/-/releases/$(WAYLAND_PROTOCOLS_VERSION)/downloads WAYLAND_PROTOCOLS_SOURCE = wayland-protocols-$(WAYLAND_PROTOCOLS_VERSION).tar.xz WAYLAND_PROTOCOLS_LICENSE = MIT WAYLAND_PROTOCOLS_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 20:55:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 14:55:06 -0600 Subject: [Buildroot] [PATCH 1/1] package/weston: bump to version 11.0.0 Message-ID: <20221015205506.3903346-1-james.hilliard1@gmail.com> Drop patch which is now upstream. Drop no longer supported weston-launch. Drop no longer supported color-management-colord config option. Remove duplicate backend-headless config option. Add new libgbm requirement for renderer-gl. Add new freerdp server requirement for backend-rdp. Add support for new screenshare feature. Add support for new rdp as backend default feature. Signed-off-by: James Hilliard --- ...ncy-on-screenshooter-client-protocol.patch | 38 ------------------- package/weston/Config.in | 14 +++++++ package/weston/weston.hash | 6 +-- package/weston/weston.mk | 28 +++++--------- 4 files changed, 26 insertions(+), 60 deletions(-) delete mode 100644 package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch diff --git a/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch b/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch deleted file mode 100644 index 927215380e..0000000000 --- a/package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 2ac6b6b084a877adde64db7faff2ed22eb3ea97a Mon Sep 17 00:00:00 2001 -From: Daniel Stone -Date: Tue, 8 Feb 2022 22:39:42 +0000 -Subject: [PATCH] tests: Add dependency on screenshooter client protocol - -Given that the test-helper code relies on the screenshooter protocol, -make sure it's available for us to build, and the dependency ensures we -build in order. - -Fixes: #588 - -Signed-off-by: Daniel Stone - -[Retrieved from: -https://gitlab.freedesktop.org/wayland/weston/-/commit/2ac6b6b084a877adde64db7faff2ed22eb3ea97a] -Signed-off-by: Fabrice Fontaine ---- - tests/meson.build | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/tests/meson.build b/tests/meson.build -index 2d464ddcc..222091cd1 100644 ---- a/tests/meson.build -+++ b/tests/meson.build -@@ -29,8 +29,9 @@ lib_test_client = static_library( - 'weston-test-client-helper.c', - 'weston-test-fixture-compositor.c', - weston_test_client_protocol_h, -- weston_screenshooter_protocol_c, - weston_test_protocol_c, -+ weston_screenshooter_client_protocol_h, -+ weston_screenshooter_protocol_c, - viewporter_client_protocol_h, - viewporter_protocol_c, - 'color_util.h', --- -GitLab - diff --git a/package/weston/Config.in b/package/weston/Config.in index 3b4e932b7d..20ca826324 100644 --- a/package/weston/Config.in +++ b/package/weston/Config.in @@ -42,6 +42,14 @@ config BR2_PACKAGE_WESTON_DEFAULT_HEADLESS bool "headless" select BR2_PACKAGE_WESTON_HEADLESS +config BR2_PACKAGE_WESTON_DEFAULT_RDP + bool "rdp" + depends on BR2_USE_MMU # freerdp, libglib2 + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_WCHAR # freerdp + depends on BR2_INSTALL_LIBSTDCPP # freerdp + select BR2_PACKAGE_WESTON_RDP + config BR2_PACKAGE_WESTON_DEFAULT_WAYLAND bool "wayland (nested)" select BR2_PACKAGE_WESTON_WAYLAND @@ -60,6 +68,7 @@ config BR2_PACKAGE_WESTON_DEFAULT_COMPOSITOR string default "drm" if BR2_PACKAGE_WESTON_DEFAULT_DRM default "headless" if BR2_PACKAGE_WESTON_DEFAULT_HEADLESS + default "rdp" if BR2_PACKAGE_WESTON_DEFAULT_RDP default "wayland" if BR2_PACKAGE_WESTON_DEFAULT_WAYLAND default "x11" if BR2_PACKAGE_WESTON_DEFAULT_X11 @@ -74,6 +83,7 @@ config BR2_PACKAGE_WESTON_RDP depends on BR2_USE_WCHAR # freerdp depends on BR2_INSTALL_LIBSTDCPP # freerdp select BR2_PACKAGE_FREERDP + select BR2_PACKAGE_FREERDP_SERVER help This enables the RDP backend, which allows accessing weston through the network with any RDP-compliant client. @@ -143,6 +153,10 @@ config BR2_PACKAGE_WESTON_SHELL_KIOSK default y select BR2_PACKAGE_WESTON_HAS_SHELL +config BR2_PACKAGE_WESTON_SCREENSHARE + bool "screenshare" + default y + config BR2_PACKAGE_WESTON_DEMO_CLIENTS bool "demo clients" depends on BR2_USE_MMU # pango diff --git a/package/weston/weston.hash b/package/weston/weston.hash index d58ca1ef70..88061c2bca 100644 --- a/package/weston/weston.hash +++ b/package/weston/weston.hash @@ -1,4 +1,4 @@ -# From https://lists.freedesktop.org/archives/wayland-devel/2022-June/042260.html -sha256 8a9e52506a865a7410981b04f8341b89b84106db8531ab1f9fdd37b5dc034115 weston-10.0.1.tar.xz -sha512 688d843096a95b463161b98e85ca3443b31ba2ee49fc8d456a2780cc96f576e9d097054e9f361997a66e9cc8373cf29e406a742dae3884b3b50b26acf1710c8c weston-10.0.1.tar.xz +# From https://lists.freedesktop.org/archives/wayland-devel/2022-September/042410.html +sha256 a6138d4dc9554560ac304312df456019f4be025ec79130f05fb5f2e41c091e1d weston-11.0.0.tar.xz +sha512 71554dc870e9c6832fdfb8f0e8dbcd7ad01c3827041c2f7fe4b7679df33b242fd00e7f0c8728d1aeecc648f8296a9d3fc502a66c91ec662f03086d9a28aab3ea weston-11.0.0.tar.xz sha256 fdb65868f65d0fbdb05c2d3b779e10ce9969fa0c4b9262ba4f260e87086ab860 COPYING diff --git a/package/weston/weston.mk b/package/weston/weston.mk index 5e71473640..59b977721a 100644 --- a/package/weston/weston.mk +++ b/package/weston/weston.mk @@ -4,7 +4,7 @@ # ################################################################################ -WESTON_VERSION = 10.0.1 +WESTON_VERSION = 11.0.0 WESTON_SITE = https://gitlab.freedesktop.org/wayland/weston/-/releases/$(WESTON_VERSION)/downloads WESTON_SOURCE = weston-$(WESTON_VERSION).tar.xz WESTON_LICENSE = MIT @@ -16,8 +16,6 @@ WESTON_DEPENDENCIES = host-pkgconf wayland wayland-protocols \ libxkbcommon pixman libpng udev cairo libinput libdrm WESTON_CONF_OPTS = \ - -Dbackend-headless=false \ - -Dcolor-management-colord=false \ -Ddoc=false \ -Dremoting=false \ -Dtools=calibrator,debug,info,terminal,touch-calibrator @@ -57,23 +55,9 @@ else WESTON_CONF_OPTS += -Dimage-webp=false endif -# weston-launch must be u+s root in order to work properly -ifeq ($(BR2_PACKAGE_LINUX_PAM),y) -define WESTON_PERMISSIONS - /usr/bin/weston-launch f 4755 0 0 - - - - - -endef -define WESTON_USERS - - - weston-launch -1 - - - - Weston launcher group -endef -WESTON_CONF_OPTS += -Ddeprecated-weston-launch=true -WESTON_DEPENDENCIES += linux-pam -else -WESTON_CONF_OPTS += -Ddeprecated-weston-launch=false -endif - -ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGLES),yy) +ifeq ($(BR2_PACKAGE_HAS_LIBEGL_WAYLAND)$(BR2_PACKAGE_HAS_LIBGBM)$(BR2_PACKAGE_HAS_LIBGLES),yyy) WESTON_CONF_OPTS += -Drenderer-gl=true -WESTON_DEPENDENCIES += libegl libgles +WESTON_DEPENDENCIES += libegl libgbm libgles ifeq ($(BR2_PACKAGE_PIPEWIRE)$(BR2_PACKAGE_WESTON_DRM),yy) WESTON_CONF_OPTS += -Dpipewire=true WESTON_DEPENDENCIES += pipewire @@ -180,6 +164,12 @@ else WESTON_CONF_OPTS += -Dshell-kiosk=false endif +ifeq ($(BR2_PACKAGE_WESTON_SCREENSHARE),y) +WESTON_CONF_OPTS += -Dscreenshare=true +else +WESTON_CONF_OPTS += -Dscreenshare=false +endif + ifeq ($(BR2_PACKAGE_WESTON_DEMO_CLIENTS),y) WESTON_CONF_OPTS += -Ddemo-clients=true WESTON_DEPENDENCIES += pango -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 21:09:40 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 15:09:40 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/brltty: fix infinite loop in configure Message-ID: <20221015210940.4002212-1-james.hilliard1@gmail.com> Backport a patch to fix an infinite loop bug in configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard --- Changes v1 -> v2: - backport patch instead of revert --- ...unProgramTerminationCommands-used-a-.patch | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch new file mode 100644 index 0000000000..0f81254e08 --- /dev/null +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch @@ -0,0 +1,29 @@ +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 +From: Dave Mielke +Date: Sat, 15 Oct 2022 15:20:38 -0400 +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash + command. (dm) + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] +--- + brltty-prologue.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..6d1faf983 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { + while [ "${programTerminationCommandCount}" -gt 0 ] + do + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) + + local process="${1}" + local directory="${2}" +-- +2.34.1 + -- 2.34.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:09 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) Message-ID: Hello All! This small four-patch series touches on the delicate intricacies of the systemd package and how we integrate it in Buildroot, especially with regard to read-only filesystems. The underlying issue is that systemd wants a writable /var filesystem (it will store a bunch of things at runtime in there). A lot of packages also expect a writable /var. After all, var stands for variadic, so it is not supposed to be set in stone and read-only. The solution we implemented in Buildroot is to generate a factory for /var, and register that as tmpfiles, at build time, and mount a tmpfs on the then-empty /var at runtime, so that systemd-tmpfiles populates /var on boot. Having a tmpfs means /var is repopulated from a clean state at each boot, and people who want a persistent /var have to provide their own mechanism to mount their actual filesystem instead. However, for some people, this does not seem to work as expected, so we introduced a call to systemd-tmpfiles at build time, to pre-populate the rootfs from all the tmpfiles, of which our var factory, at build time. These two mechanism clash with each others, and are mostly incompatible, and causes files to be duplicated. To solve the issue, this series introduces new options, so the user can elect to use either, none, or both mechanisms, as they see fit. The first steps are borrowed from Yann at work, where we make it easier to change the location where /var is nounted from, by making it a systemd mount unit, rather than use the legacy fstab, and move the factory to /usr/share as it is a system factory (/etc is for the administartor to provide overrides). Note that those two are not strictly required for the following, but since that makes it easier to change the /var filesystem in a systemd-compliant manner, they are a nice addition to the series. Then we move together the two mechanisms under the auspices of a common package, to make it easier to later make them conditional. Finally, we introduce those two new options, that drive each mechanism. Eventally, we want to highlight that, by default, the behaviour has not changed, since the two new options default to y, so as to explicitly keep the behaviour from nefore this patchset. Regards, Yann E. MORIN. ---------------------------------------------------------------- Yann E. MORIN (4): package/skeleton-systemd: move /var factory out of /etc package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs package/skeleton-systemd: host the tmpfiles preparation script system: add options for var factory and tmpfiles pre-seed .../fakeroot_tmpfiles.sh | 0 .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- package/skeleton-init-systemd/var.mount | 18 ++++++++++ package/systemd/systemd.mk | 6 ---- system/Config.in | 38 +++++++++++++++++++++- 5 files changed, 69 insertions(+), 11 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) create mode 100644 package/skeleton-init-systemd/var.mount -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sat Oct 15 21:23:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/skeleton-systemd: move /var factory out of /etc In-Reply-To: References: Message-ID: <642fc3070362553483dd284d81df6949b3d7a682.1665868987.git.yann.morin.1998@free.fr> From: "Yann E. MORIN" When the rootfs is not remounted read-write (thus assuming a read-only rootfs like squashfs), we create a tmpfiles.d factory for /var. However, we register those in /etc/tmpfiles.d/, but /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we move our var factory to /usr/lib/tmpfiles.d/, which is also the location where systemd itself places its own tmpfiles, and where we already put all our other tmpfiles (see audit, avahi, cryptsetup, dhcp, lighttpd, nfs-utils, quagga, samba4, swupdate) and our handling of systemd's catalog files too. We also rename the file to a better name, so that it is obvious it is generated by us (systemd already installs a var.conf of its own, so we want to avoid name clashing). Last little detail: there is no need or reason to create .../tmpfiles.d/ at install time; it is only needed in the rootfs-pre-cmd hook, so we only create it just before we need it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only moves out of /etc and into /usr/lib - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- package/skeleton-init-systemd/skeleton-init-systemd.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 795a171809..7b66732ef4 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -29,7 +29,6 @@ else # a real (but empty) directory, and the "factory files" will be copied # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW - mkdir -p $(TARGET_DIR)/etc/systemd/tmpfiles.d echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef @@ -38,6 +37,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var + mkdir -p $(TARGET_DIR)/usr/lib/tmpfiles.d for i in $(TARGET_DIR)/usr/share/factory/var/* \ $(TARGET_DIR)/usr/share/factory/var/lib/* \ $(TARGET_DIR)/usr/share/factory/var/lib/systemd/*; do \ @@ -51,7 +51,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR printf "C! %s - - - -\n" "$${j}" \ || exit 1; \ fi; \ - done >$(TARGET_DIR)/etc/tmpfiles.d/var-factory.conf + done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:10 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:10 +0200 Subject: [Buildroot] [PATCH 2/4] package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs In-Reply-To: References: Message-ID: <116d929d3e556155552784dd7792afad72cd3125.1665868987.git.yann.morin.1998@free.fr> To mount our /var tmpfs when the rootfs is mounted read-only (really, not remounted reqd-write), we use an entry in fstab. However, /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we register /var as a systemd mount unit, so that we can also have the /var factory populated and functional even when /etc is empty. The var.mount unit is heavily modelled after systemd's own tmp.mount one, so we carry the same license for that file (in case that may apply). We add an explicit reverse dependency to systemd-tmpfiles-setup.service, to ensure /var is mounted before we try to populate it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only handles converting /var mounting into a systemd unit - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- .../skeleton-init-systemd.mk | 3 ++- package/skeleton-init-systemd/var.mount | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 package/skeleton-init-systemd/var.mount diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 7b66732ef4..970951d553 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -30,7 +30,6 @@ else # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab - echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR @@ -52,6 +51,8 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/var.mount new file mode 100644 index 0000000000..6b165dff6d --- /dev/null +++ b/package/skeleton-init-systemd/var.mount @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: LGPL-2.1-or-later +# Modelled after systemd's tmp.mount + +[Unit] +Description=Buildroot /var tmpfs +DefaultDependencies=no +Conflicts=umount.target +Before=basic.target local-fs.target umount.target systemd-tmpfiles-setup.service +After=swap.target + +[Mount] +What=tmpfs +Where=/var +Type=tmpfs +Options=mode=1777,strictatime,nosuid,nodev,size=50%%,nr_inodes=1m + +[Install] +WantedBy=basic.target -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/skeleton-systemd: host the tmpfiles preparation script In-Reply-To: References: Message-ID: <16a20e2a0d976faf2aee7ab8ebb6cfe0e9d8422d.1665868987.git.yann.morin.1998@free.fr> Commit 0d9b84b7a83f (package/systemd: invoke systemd-tmpfilesd on final image) forcefully introduced a call to systemd-tmpfiles as a per-rootfs hook, on the premise that would help with read-only rootfs. However, that did not account for the then-pre-existing handling of /var as a factory when the user opted not to remount / read-write (by not setting BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW). This means that, for users who want to use a factory for /var, the generated filesystem contains the factory files twice: once as stored in the factory, and once as populated by systemd-tmpefilesd. In the hope to reconcile the two solutions, we move the handling of calling systemd-tmpfilesd to the skeleton-init-systemd package, where we already handle the /var factory. Having the two in the same package will make it easier, in the future, to provide the user with a choice whether to use one of the other. Note that it is very important to keep the order of the hooks as they are. Indeed, skeleton-init-systemd sorts before systemd, so its hooks were registered before systemd's hooks; now that we move the CREATE_TMPFILES hook, we must ensure it is called after the PRE_ROOTFS_VAR one, so that the behaviour of acting on the var factory remains. As a final note: we chose the move this way, rather than move the var factory into the systemd package, because it is more related to the system integration on the Buildroot side, rather than the integration of the systemd package in Buildroot. Similarly, the other four rootfs hooks, SYSTEMD_LOCALE_PURGE_CATALOGS, SYSTEMD_UPDATE_CATALOGS, SYSTEMD_RM_CATALOG_UPDATE_SERVICE, and specially SYSTEMD_PRESET_ALL, should also be moved out of the systemd package, because they too are more related to the Buildroot system, rather than to the systemd package itself; but the frontier is very porous is either way, for such a package as special as systemd. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh | 0 package/skeleton-init-systemd/skeleton-init-systemd.mk | 6 ++++++ package/systemd/systemd.mk | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) diff --git a/package/systemd/fakeroot_tmpfiles.sh b/package/skeleton-init-systemd/fakeroot_tmpfiles.sh similarity index 100% rename from package/systemd/fakeroot_tmpfiles.sh rename to package/skeleton-init-systemd/fakeroot_tmpfiles.sh diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 970951d553..89a28d1780 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -58,6 +58,12 @@ SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_V endif +define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ + $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home mkdir -p $(TARGET_DIR)/srv diff --git a/package/systemd/systemd.mk b/package/systemd/systemd.mk index 1d7452de19..e4a8114221 100644 --- a/package/systemd/systemd.mk +++ b/package/systemd/systemd.mk @@ -739,12 +739,6 @@ define SYSTEMD_RM_CATALOG_UPDATE_SERVICE endef SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_RM_CATALOG_UPDATE_SERVICE -define SYSTEMD_CREATE_TMPFILES_HOOK - HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ - $(SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) -endef -SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK - define SYSTEMD_PRESET_ALL $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all endef -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:23:12 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:23:12 +0200 Subject: [Buildroot] [PATCH 4/4] system: add options for var factory and tmpfiles pre-seed In-Reply-To: References: Message-ID: <94bc8ca32665535f3e99f3e30c8e78f243df1695.1665868987.git.yann.morin.1998@free.fr> Currently, when one does not enable remounting the rootfs read-write, i.e. keep it read-only, for example because the filesystem is actualyl read-only by design, like squashfs, then two things happen: - we create a factory from the content of /var at build time, register tmpfiles entries for it, and mount a tmpfs on /var at runtime, so that systemd-tmpfiles does populate /var from the factory; this is only done when the rootfs is not remounted r/w; - we trigger systemd-tmpfiles at build time, which uses the tmpfiles db, of which our /var entries, to pre-populate the filesystem; this is always done, whether the rootfs is remounted r/w or not. Note that Buildroot mounts a tmpfs on /var, and leaves to the integrator to care for providing an actual filesystem, as there are too many variants and is very specific to each use-case. These two mechanisms are conflicting, semantically, bit also technically: the files from the factory will be duplicated, but that may help in some situations when the actual /var filesystem is not mountable. In some cases, it might be preferable to have none, either, or both mechanisms enabled; it highly depends on the ultimate integration scheme chosen for a device. For example, some people will be very happy with a /var that is actually on a tmpfs and that it gets reseeded form scratch at every boot, while others may want to ensure that their system continue to work even when they can't mount something that makes /var writable. YMMV, as they used to say back in the day... So, we introduce two new options, in the system sub-menu, each to drive each mechanism. We default those options to y, to keep the previous behaviour by default, except the var factory is only available when the rootfs is not remounted r/w, as it were so far. We still hint in the help text that there might be some conflict between the two mechanisms, bt since it has been that way for some time, it does not look too broken for most people. Since that introduces more options related to systemd being chosen as an init system, we gather those two options and the existing one inside a if-endif block, rather than adding more 'depends on' on each options. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../skeleton-init-systemd.mk | 7 +++- system/Config.in | 38 ++++++++++++++++++- 2 files changed, 42 insertions(+), 3 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 89a28d1780..69991265a5 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -32,6 +32,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab endef +ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var @@ -55,14 +56,16 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +endif # BR2_INIT_SYSTEMD_VAR_FACTORY +endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW -endif - +ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK +endif # BR2_INIT_SYSTEMD_POPULATE_TMPFILES define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home diff --git a/system/Config.in b/system/Config.in index 888c24ce81..84c1b048cd 100644 --- a/system/Config.in +++ b/system/Config.in @@ -154,10 +154,44 @@ source "$BR2_BASE_DIR/.br2-external.in.init" endchoice +if BR2_INIT_SYSTEMD + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs on /var" + default y # legacy + depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Build a factory of the content of /var as installed by + packages, mount a tmpfs on /var at runtime, so that + systemd-tmpfiles can populate it from the factory. + + This may help on a read-only rootfs. + + It probably does not play very well with triggering a call + to systemd-tmpfiles at build time (below). + + Note: Buildroot mounts a tmpfs on /var to at least make the + system bootable out of the box; mounting a filesystem from + actual storage is left to the integration, as it is too + specific and may need preparatory work like partitionning a + device and/or formatting a filesystem first, so that falls + out of the scope of Buildroot. + +config BR2_INIT_SYSTEMD_POPULATE_TMPFILES + bool "trigger systemd-tmpfiles during build" + default y # legacy + help + Act on the systemd-tmpfiles.d database at build time, when + assembling the root filesystems. + + This may help on a read-only filesystem. + + It probably does not play very well with the /var factory + (above). + config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET string "The default unit systemd starts at bootup" default "multi-user.target" - depends on BR2_INIT_SYSTEMD help Specify the name of the unit configuration file to be started at bootup by systemd. Should end in ".target". @@ -165,6 +199,8 @@ config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET https://www.freedesktop.org/software/systemd/man/systemd.special.html#default.target +endif # BR2_INIT_SYSTEMD + choice prompt "/dev management" if !BR2_INIT_SYSTEMD default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS -- 2.25.1 From yann.morin.1998 at free.fr Sat Oct 15 21:27:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sat, 15 Oct 2022 23:27:46 +0200 Subject: [Buildroot] [PATCH] package/skeleton-systemd: systemd-ify /var on a read-only rootfs In-Reply-To: <30214_1656937450_62C2DBEA_30214_425_1_ebc1b4a9ba79f014485eb6c21d96956d9ebc3f5d.1656937448.git.yann.morin@orange.com> References: <30214_1656937450_62C2DBEA_30214_425_1_ebc1b4a9ba79f014485eb6c21d96956d9ebc3f5d.1656937448.git.yann.morin@orange.com> Message-ID: <20221015212746.GA3666@scaer> Yann, All, On 2022-07-04 14:24 +0200, yann.morin at orange.com spake thusly: > From: "Yann E. MORIN" [--SNIP--] > Even though we could have split the two changes in two patches, one for > moving the tmpfiles unit away from /etc, and one for adding a systemd > mount unit, the two really make sense together as part of having an > empty /etc, so we made that a single change. Yet, you should have known it would been a bit more easier to review the two as separate changes, so this is eaxactly what I did in that series: https://lore.kernel.org/buildroot/cover.1665868987.git.yann.morin.1998 at free.fr/T/#mea2407e6384ddf35d618c720ed9c6bf8462fcfd2 Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sat Oct 15 21:58:29 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 15 Oct 2022 23:58:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/igd2-for-linux: bump to version 2.2 Message-ID: <20221015215829.116064-1-fontaine.fabrice@gmail.com> This bump will fix the build with pupnp >= 1.14.13 raised since commit a9ee25b01b741ad4f68575974c89c65146ab87f2 and https://github.com/pupnp/pupnp/commit/2f99af26731ec7d5677e5576c006a35128b59d55: In file included from src/threadutil/FreeList.h:43, from src/threadutil/TimerThread.h:39, from src/gatedevice.h:32, from src/gatedevice.c:38: src/threadutil/ithread.h:917:12: error: expected ';' before 'int' 917 | EXPORT_SPEC int pthread_mutexattr_setkind_np( | ^~~~ | ; Fixes: - http://autobuild.buildroot.org/results/2eebf8264327bd492ee8cadc0c539d42c4f2e252 Signed-off-by: Fabrice Fontaine --- package/igd2-for-linux/igd2-for-linux.hash | 2 +- package/igd2-for-linux/igd2-for-linux.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igd2-for-linux/igd2-for-linux.hash b/package/igd2-for-linux/igd2-for-linux.hash index fe1272338a..3b4fd4f5c9 100644 --- a/package/igd2-for-linux/igd2-for-linux.hash +++ b/package/igd2-for-linux/igd2-for-linux.hash @@ -1,4 +1,4 @@ # Locally computed: -sha256 843f2b0a7597e6cc7af85da099a7cce3401a334cbb4a6ae9d38ce252311db9b9 igd2-for-linux-2.1.tar.gz +sha256 68ee10bf02b18890af8bf9e38be377f038627cd16fce54200fc1b26fd83e4375 igd2-for-linux-2.2.tar.gz sha256 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994 linuxigd2/doc/LICENSE sha256 c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3 linuxigd2/src/threadutil/COPYING diff --git a/package/igd2-for-linux/igd2-for-linux.mk b/package/igd2-for-linux/igd2-for-linux.mk index 8cc3c6ae18..c646c6bf92 100644 --- a/package/igd2-for-linux/igd2-for-linux.mk +++ b/package/igd2-for-linux/igd2-for-linux.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGD2_FOR_LINUX_VERSION = 2.1 +IGD2_FOR_LINUX_VERSION = 2.2 IGD2_FOR_LINUX_SITE = \ $(call github,Orange-OpenSource,igd2-for-linux,v$(IGD2_FOR_LINUX_VERSION)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:09:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:09:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: needs host-pkgconf Message-ID: <20221015220913.151173-1-fontaine.fabrice@gmail.com> host-pkgconf is needed since bump to version 1.16.1 in commit c8ed72c15d39cc6c676485bff8955ac5f4258138 and https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' Fixes: - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e Signed-off-by: Fabrice Fontaine --- package/libdnet/libdnet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 1e75dae323..dc56b892b4 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -14,6 +14,7 @@ LIBDNET_CONF_OPTS = \ --with-gnu-ld \ --with-check=no LIBDNET_CONFIG_SCRIPTS = dnet-config +LIBDNET_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_LIBDNET_PYTHON),y) LIBDNET_DEPENDENCIES += host-python-cython python3 -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:14:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:14:28 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221015005813.4055238-1-james.hilliard1@gmail.com> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: Hi James, Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > The bearssl package is not compatible with parallel builds. > bearssl was building perfectly fine up until now and it seems there are a lot of packages that are affected by parallel build issues (e.g. dmraid, musepack, slang, etc). Did we change something recently on the autobuilders? > > Fixes: > - > http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > Signed-off-by: James Hilliard > --- > package/bearssl/bearssl.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > index ff5f4e87b7..c2a5760af5 100644 > --- a/package/bearssl/bearssl.mk > +++ b/package/bearssl/bearssl.mk > @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > endif > > define BEARSSL_BUILD_CMDS > - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > $(BEARSSL_TARGETS) > endef > > -- > 2.34.1 > > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 15 22:24:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:24:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/lrzip: security bump to version 0.651 Message-ID: <20221015222420.165934-1-fontaine.fabrice@gmail.com> Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine --- package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..55f28e3212 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,8 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_AUTORECONF = YES LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:26:05 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:26:05 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/lrzip: security bump to version 0.651 Message-ID: <20221015222605.171104-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. - Use official tarball and so drop autoreconf https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Drop autoreconf package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..0375696414 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,9 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) -LRZIP_AUTORECONF = YES +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING LRZIP_CPE_ID_VENDOR = long_range_zip_project -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 15 22:34:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 00:34:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 Message-ID: <20221015223439.202348-1-fontaine.fabrice@gmail.com> - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:23 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:23 -0600 Subject: [Buildroot] [PATCH 01/12] package/gstreamer1: bump to version 1.20.4 Message-ID: <20221015230534.4016536-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gstreamer1/gstreamer1.hash | 4 ++-- package/gstreamer1/gstreamer1/gstreamer1.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1/gstreamer1.hash b/package/gstreamer1/gstreamer1/gstreamer1.hash index 5daadfae74..5fb52606fe 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.hash +++ b/package/gstreamer1/gstreamer1/gstreamer1.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.3.tar.xz.sha256sum -sha256 607daf64bbbd5fb18af9d17e21c0d22c4d702fffe83b23cb22d1b1af2ca23a2a gstreamer-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.4.tar.xz.sha256sum +sha256 67c1edf8c3c339cda5dde85f4f7b953bb9607c2d13ae970e2491c5c4c055ef5f gstreamer-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gstreamer1/gstreamer1.mk b/package/gstreamer1/gstreamer1/gstreamer1.mk index 89d5f93d43..16c016b145 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.mk +++ b/package/gstreamer1/gstreamer1/gstreamer1.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_VERSION = 1.20.3 +GSTREAMER1_VERSION = 1.20.4 GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz GSTREAMER1_SITE = https://gstreamer.freedesktop.org/src/gstreamer GSTREAMER1_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:24 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:24 -0600 Subject: [Buildroot] [PATCH 02/12] package/gst1-plugins-base: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash | 4 ++-- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash index 105708f1da..5c729d832f 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.3.tar.xz.sha256sum -sha256 7e30b3dd81a70380ff7554f998471d6996ff76bbe6fc5447096f851e24473c9f gst-plugins-base-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.4.tar.xz.sha256sum +sha256 8d181b7abe4caf23ee9f9ec5b4d3e232640452464e39495bfffb6d776fc97225 gst-plugins-base-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk index c244a0c621..d225cdf910 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BASE_VERSION = 1.20.3 +GST1_PLUGINS_BASE_VERSION = 1.20.4 GST1_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST1_PLUGINS_BASE_VERSION).tar.xz GST1_PLUGINS_BASE_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-base GST1_PLUGINS_BASE_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:25 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:25 -0600 Subject: [Buildroot] [PATCH 03/12] package/gst1-plugins-good: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-3-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash | 4 ++-- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash index 81da41388f..b30c512878 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.3.tar.xz.sha256sum -sha256 f8f3c206bf5cdabc00953920b47b3575af0ef15e9f871c0b6966f6d0aa5868b7 gst-plugins-good-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.4.tar.xz.sha256sum +sha256 b16130fbe632fa8547c2147a0ef575b0140fb521065c5cb121c72ddbd23b64da gst-plugins-good-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk index de7dcb985d..cc7bab5824 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_GOOD_VERSION = 1.20.3 +GST1_PLUGINS_GOOD_VERSION = 1.20.4 GST1_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST1_PLUGINS_GOOD_VERSION).tar.xz GST1_PLUGINS_GOOD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-good GST1_PLUGINS_GOOD_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:26 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:26 -0600 Subject: [Buildroot] [PATCH 04/12] package/gst1-plugins-bad: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-4-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash | 4 ++-- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash index 5a413cd350..c8789a707d 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.3.tar.xz.sha256sum -sha256 7a11c13b55dd1d2386dd902219e41cbfcdda8e1e0aa3e738186c95074b35da4f gst-plugins-bad-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.4.tar.xz.sha256sum +sha256 a1a3f53b3604d9a04fdd0bf9a1a616c3d2dab5320489e9ecee1178e81e33a16a gst-plugins-bad-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk index 57974d723a..14710a2501 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BAD_VERSION = 1.20.3 +GST1_PLUGINS_BAD_VERSION = 1.20.4 GST1_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST1_PLUGINS_BAD_VERSION).tar.xz GST1_PLUGINS_BAD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-bad GST1_PLUGINS_BAD_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:27 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:27 -0600 Subject: [Buildroot] [PATCH 05/12] package/gst1-plugins-ugly: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-5-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash | 4 ++-- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash index ffd060f465..4ec29e6894 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.3.tar.xz.sha256sum -sha256 8caa20789a09c304b49cf563d33cca9421b1875b84fcc187e4a385fa01d6aefd gst-plugins-ugly-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.4.tar.xz.sha256sum +sha256 5c9ec6bab96517e438b3f9bae0ceb84d3436f3da9bbe180cf4d28e32a7251b59 gst-plugins-ugly-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk index 131163e20a..20382719c3 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_UGLY_VERSION = 1.20.3 +GST1_PLUGINS_UGLY_VERSION = 1.20.4 GST1_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST1_PLUGINS_UGLY_VERSION).tar.xz GST1_PLUGINS_UGLY_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-ugly GST1_PLUGINS_UGLY_LICENSE_FILES = COPYING -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:28 -0600 Subject: [Buildroot] [PATCH 06/12] package/gst1-devtools: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-6-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-devtools/gst1-devtools.hash | 4 ++-- package/gstreamer1/gst1-devtools/gst1-devtools.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.hash b/package/gstreamer1/gst1-devtools/gst1-devtools.hash index bed13db295..fc504a2c12 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.hash +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.3.tar.xz.sha256sum -sha256 bbbd45ead703367ea8f4be9b3c082d7b62bef47b240a39083f27844e28758c47 gst-devtools-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.4.tar.xz.sha256sum +sha256 82a293600273f4dd3eed567aae510ca0c7d629c3807788b00e6cdbd1d2459a84 gst-devtools-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 validate/COPYING diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.mk b/package/gstreamer1/gst1-devtools/gst1-devtools.mk index 14f665a408..fbb04c92ef 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.mk +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_DEVTOOLS_VERSION = 1.20.3 +GST1_DEVTOOLS_VERSION = 1.20.4 GST1_DEVTOOLS_SOURCE = gst-devtools-$(GST1_DEVTOOLS_VERSION).tar.xz GST1_DEVTOOLS_SITE = https://gstreamer.freedesktop.org/src/gst-devtools GST1_DEVTOOLS_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:29 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:29 -0600 Subject: [Buildroot] [PATCH 07/12] package/gst1-libav: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-7-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-libav/gst1-libav.hash | 4 ++-- package/gstreamer1/gst1-libav/gst1-libav.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-libav/gst1-libav.hash b/package/gstreamer1/gst1-libav/gst1-libav.hash index 1b86e82b93..78f5b5bb07 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.hash +++ b/package/gstreamer1/gst1-libav/gst1-libav.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.3.tar.xz.sha256sum -sha256 3fedd10560fcdfaa1b6462cbf79a38c4e7b57d7f390359393fc0cef6dbf27dfe gst-libav-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.4.tar.xz.sha256sum +sha256 04ccbdd58fb31dd94098da599209834a0e7661638c5703381dd0a862c56fc532 gst-libav-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-libav/gst1-libav.mk b/package/gstreamer1/gst1-libav/gst1-libav.mk index 80545fdd4c..a867af5147 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.mk +++ b/package/gstreamer1/gst1-libav/gst1-libav.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_LIBAV_VERSION = 1.20.3 +GST1_LIBAV_VERSION = 1.20.4 GST1_LIBAV_SOURCE = gst-libav-$(GST1_LIBAV_VERSION).tar.xz GST1_LIBAV_SITE = https://gstreamer.freedesktop.org/src/gst-libav GST1_LIBAV_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:30 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:30 -0600 Subject: [Buildroot] [PATCH 08/12] package/gst1-vaapi: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-8-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-vaapi/gst1-vaapi.hash | 4 ++-- package/gstreamer1/gst1-vaapi/gst1-vaapi.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash index fce687774a..5baaa4dfb7 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.3.tar.xz.sha256sum -sha256 6ee99eb316abdde9ad37002915bd8c3867918f6fdc74b7cf2ac4c1ae0d690b45 gstreamer-vaapi-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.4.tar.xz.sha256sum +sha256 ab12596144c05506e9782374c5d2cdfb3069fca89908d6de360d947bb77fd06a gstreamer-vaapi-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LIB diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk index 8b137c37ec..bd6c16be3e 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_VAAPI_VERSION = 1.20.3 +GST1_VAAPI_VERSION = 1.20.4 GST1_VAAPI_SITE = https://gstreamer.freedesktop.org/src/gstreamer-vaapi GST1_VAAPI_SOURCE = gstreamer-vaapi-$(GST1_VAAPI_VERSION).tar.xz GST1_VAAPI_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:31 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:31 -0600 Subject: [Buildroot] [PATCH 09/12] package/gst1-rtsp-server: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-9-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash | 4 ++-- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash index 13dcb764d8..b6a31f8796 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash @@ -1,4 +1,4 @@ -# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.3.tar.xz.sha256sum -sha256 ee402718be9b127f0e5e66ca4c1b4f42e4926ec93ba307b7ccca5dc6cc9794ca gst-rtsp-server-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.4.tar.xz.sha256sum +sha256 88d9ef634e59aeb8cc183ad5ae444557c5a88dd49d833b9072bc6e1fae6a3d7d gst-rtsp-server-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING.LIB diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk index 02cf9e5eb1..0b18c1fcf8 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_RTSP_SERVER_VERSION = 1.20.3 +GST1_RTSP_SERVER_VERSION = 1.20.4 GST1_RTSP_SERVER_SOURCE = gst-rtsp-server-$(GST1_RTSP_SERVER_VERSION).tar.xz GST1_RTSP_SERVER_SITE = http://gstreamer.freedesktop.org/src/gst-rtsp-server GST1_RTSP_SERVER_LICENSE = LGPL-2.1+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:32 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:32 -0600 Subject: [Buildroot] [PATCH 10/12] package/gstreamer1-editing-services: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-10-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- .../gstreamer1-editing-services.hash | 4 ++-- .../gstreamer1-editing-services.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash index 18dd1a79b3..308596d7cd 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash @@ -1,5 +1,5 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.3.tar.xz.sha256sum -sha256 5fd896de69fbe24421eb6b0ff8d2f8b4c3cba3f3025ceacd302172f39a8abaa2 gst-editing-services-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.4.tar.xz.sha256sum +sha256 aa03e983af5d79c1befffe3575b034e60960619a96bf877447cb73c28016fc41 gst-editing-services-1.20.4.tar.xz # Hashes for license files: sha256 f445dc78b88496f7e20c7a2a461b95baba5865c8919b8289ac24ac0a80c6ce7a COPYING diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk index 417aaf2a45..77feb15991 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.3 +GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.4 GSTREAMER1_EDITING_SERVICES_SOURCE = gst-editing-services-$(GSTREAMER1_EDITING_SERVICES_VERSION).tar.xz GSTREAMER1_EDITING_SERVICES_SITE = https://gstreamer.freedesktop.org/src/gstreamer-editing-services GSTREAMER1_EDITING_SERVICES_LICENSE = LGPL-2.0+ -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:33 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:33 -0600 Subject: [Buildroot] [PATCH 11/12] package/gst-omx: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-11-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst-omx/gst-omx.hash | 4 ++-- package/gstreamer1/gst-omx/gst-omx.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst-omx/gst-omx.hash b/package/gstreamer1/gst-omx/gst-omx.hash index 8abf4a27e8..140ad626f7 100644 --- a/package/gstreamer1/gst-omx/gst-omx.hash +++ b/package/gstreamer1/gst-omx/gst-omx.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.3.tar.xz.sha256sum -sha256 8db48040bb41f09edf8d17ff6d16c54888d7777ba4501c2c69f0083350ea9a15 gst-omx-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.4.tar.xz.sha256sum +sha256 70ddd485e2dcab79070164d61ad2ff3a63e15a1d7abf9075d86eb77762b0edfd gst-omx-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst-omx/gst-omx.mk b/package/gstreamer1/gst-omx/gst-omx.mk index 085bff87ad..d644c44995 100644 --- a/package/gstreamer1/gst-omx/gst-omx.mk +++ b/package/gstreamer1/gst-omx/gst-omx.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST_OMX_VERSION = 1.20.3 +GST_OMX_VERSION = 1.20.4 GST_OMX_SOURCE = gst-omx-$(GST_OMX_VERSION).tar.xz GST_OMX_SITE = https://gstreamer.freedesktop.org/src/gst-omx -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:05:34 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 17:05:34 -0600 Subject: [Buildroot] [PATCH 12/12] package/gst1-python: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <20221015230534.4016536-12-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/gstreamer1/gst1-python/gst1-python.hash | 4 ++-- package/gstreamer1/gst1-python/gst1-python.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-python/gst1-python.hash b/package/gstreamer1/gst1-python/gst1-python.hash index 9501d94a97..adb116ac4c 100644 --- a/package/gstreamer1/gst1-python/gst1-python.hash +++ b/package/gstreamer1/gst1-python/gst1-python.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.3.tar.xz.sha256sum -sha256 db348120eae955b8cc4de3560a7ea06e36d6e1ddbaa99a7ad96b59846601cfdc gst-python-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.4.tar.xz.sha256sum +sha256 5eb4136d03e2a495f4499c8b2e6d9d3e7b5e73c5a8b8acf9213d57bc6a7bd3c1 gst-python-1.20.4.tar.xz sha256 ea3ad127610e5ded2210b3a86a46314f2b3b28e438eccffdae19a4d6fbcdb0c2 COPYING diff --git a/package/gstreamer1/gst1-python/gst1-python.mk b/package/gstreamer1/gst1-python/gst1-python.mk index 0fa1f661b8..feb2de718a 100644 --- a/package/gstreamer1/gst1-python/gst1-python.mk +++ b/package/gstreamer1/gst1-python/gst1-python.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PYTHON_VERSION = 1.20.3 +GST1_PYTHON_VERSION = 1.20.4 GST1_PYTHON_SOURCE = gst-python-$(GST1_PYTHON_VERSION).tar.xz GST1_PYTHON_SITE = https://gstreamer.freedesktop.org/src/gst-python GST1_PYTHON_INSTALL_STAGING = YES -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 15 23:21:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 15 Oct 2022 19:21:15 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine wrote: > > Hi James, > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : >> >> The bearssl package is not compatible with parallel builds. > > > bearssl was building perfectly fine up until now and it seems there are a lot of packages that are affected by parallel build issues (e.g. dmraid, musepack, slang, etc). Some parallel build bugs don't reproduce reliably due to timing, I made a change to my autobuilders which massively increases the chance of triggering build failures in packages which have dependency graph bugs. This triggers build build failures in -j1 builds which would otherwise only appear when running parallel builds(my autobuilders are generally running with -j1 to make the logs more readable). > Did we change something recently on the autobuilders? Yes, all my autobuilders were recently changed to use make master(will be make version 4.4 once released) with top level --shuffle=random. Details: https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 https://trofi.github.io/posts/238-new-make-shuffle-mode.html http://trofi.github.io/posts/249-an-update-on-make-shuffle.html Note that MAKE1 is currently broken itself without this when using shuffle mode: https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > >> >> >> Fixes: >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 >> >> Signed-off-by: James Hilliard >> --- >> package/bearssl/bearssl.mk | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk >> index ff5f4e87b7..c2a5760af5 100644 >> --- a/package/bearssl/bearssl.mk >> +++ b/package/bearssl/bearssl.mk >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib >> endif >> >> define BEARSSL_BUILD_CMDS >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ >> $(BEARSSL_TARGETS) >> endef >> >> -- >> 2.34.1 >> > Best Regards, > > Fabrice From judge.packham at gmail.com Sun Oct 16 02:20:51 2022 From: judge.packham at gmail.com (Chris Packham) Date: Sun, 16 Oct 2022 15:20:51 +1300 Subject: [Buildroot] [PATCH v2] package/syslog-ng: Bump version to 3.38.1 Message-ID: <20221016022051.3870975-1-judge.packham@gmail.com> Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham --- Notes: Changes in v2: - update version in syslog-ng.conf ...-lib-tlscontext.c-fix-libressl-build.patch | 85 ------------------- package/syslog-ng/syslog-ng.conf | 2 +- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 4 files changed, 4 insertions(+), 89 deletions(-) delete mode 100644 package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.conf b/package/syslog-ng/syslog-ng.conf index 45b94facf9..69db9b4b78 100644 --- a/package/syslog-ng/syslog-ng.conf +++ b/package/syslog-ng/syslog-ng.conf @@ -1,4 +1,4 @@ - at version: 3.37 + at version: 3.38 source s_sys { file("/proc/kmsg" program_override("kernel")); diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt -- 2.38.0 From me at linux.beauty Sun Oct 16 04:08:44 2022 From: me at linux.beauty (Li Chen) Date: Sun, 16 Oct 2022 12:08:44 +0800 Subject: [Buildroot] [PATCH] package/kmod: use the correct path for kmod In-Reply-To: <20221012224008.5dc7c7b6@windsurf> References: <87edvdeseo.wl-me@linux.beauty> <20221012224008.5dc7c7b6@windsurf> Message-ID: <183defad72f.103c9b752645508.6184936701214911726@linux.beauty> Hi Thomas, ---- On Thu, 13 Oct 2022 04:40:08 +0800 Thomas Petazzoni wrote --- > Hello, > > On Wed, 12 Oct 2022 09:34:39 +0800 > Li Chenme at linux.beauty> wrote: > > > Content-Transfer-Encoding: 8bit > > > > kmod install path is always /usr/bin/kmod instead > > of /bin/kmod. > > > > So if we link modprobe/lsmod/... to /bin/kmod > > > > We will get error like: > > > # modprobe > > > -sh: modprobe: not found > > > > because it points to: > > > # ls -liah /sbin/modprobe > > > 2551 lrwxrwxrwx 1 root root 11 Sep 25 10:05 /sbin/modprobe -> ../bin/kmod > > > > and kmod is under /usr/bin/kmod instead of /bin/kmod. > > > > Signed-off-by: Li Chen me at linux.beauty> > > Are you testing a BR2_ROOTFS_MERGED_USR enabled or a > BR2_ROOTFS_MERGED_USR disabled configuration? > > If you're testing a BR2_ROOTFS_MERGED_USR enabled configuration, then > the "modprobe" symlink, even if created in /sbin is in fact in > /usr/sbin, because /sbin is a symlink to /usr/sbin. So actually the > symlink is /usr/sbin/modprobe -> ../bin/kmod, which is correct as kmod > is indeed in /usr/bin/kmod. > > If you're testing a BR2_ROOTFS_MERGED_USR disabled configuration, then > the "modprobe" symlink is really in /sbin, and /sbin/modprobe is a > symlink to ../usr/bin/kmod, which is correct. > > (Of course, I didn't do a test, so maybe my reasoning is wrong, but the > current logic appears correct at first sight). Thanks for your reply, I cannot reproduce this issue now somehow. I will update this thread if I come across it again someday. Regards, Li From joel at jms.id.au Sun Oct 16 04:50:06 2022 From: joel at jms.id.au (Joel Stanley) Date: Sun, 16 Oct 2022 04:50:06 +0000 Subject: [Buildroot] [PATCH] package/coremark: Set cflags In-Reply-To: References: <20220913072303.1698887-1-joel@jms.id.au> Message-ID: On Fri, 16 Sept 2022 at 05:03, Chris Packham wrote: > > On Tue, Sep 13, 2022 at 7:23 PM Joel Stanley wrote: > > > > The coremark build needs to set PORT_CFLAGS explicitly in order to pick > > up the configured optmisation level, and other flags. > > > > Signed-off-by: Joel Stanley > > Acked-by: Chris Packham ping > > > --- > > package/coremark/coremark.mk | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/package/coremark/coremark.mk b/package/coremark/coremark.mk > > index 418fd5c8d39b..9ea8693e7189 100644 > > --- a/package/coremark/coremark.mk > > +++ b/package/coremark/coremark.mk > > @@ -11,6 +11,7 @@ COREMARK_LICENSE_FILES = LICENSE.md > > > > define COREMARK_BUILD_CMDS > > $(TARGET_MAKE_ENV) $(MAKE) CC="$(TARGET_CC)" -C $(@D) \ > > + PORT_CFLAGS="$(TARGET_CFLAGS)" \ > > PORT_DIR=linux$(if $(BR2_ARCH_IS_64),64) EXE= link > > endef > > > > -- > > 2.35.1 > > From thomas.petazzoni at bootlin.com Sun Oct 16 05:38:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 16 Oct 2022 05:38:20 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-15 Message-ID: <20221016053828.119BB41601@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-15 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 7 | 4 | 0 | 11 | 2022.08.x | 14 | 9 | 0 | 23 | master | 126 | 588 | 4 | 718 | Classification of failures by reason for master ----------------------------------------------- ca-certificates-20211016 | 32 bearssl-0.6 | 30 berkeleydb-5.3.28 | 30 host-gcc-initial-11.3.0 | 29 systemd-250.4 | 25 xz-5.2.7 | 24 coremark-pro-1.1.2743 | 21 host-gcc-final-11.3.0 | 19 glibc-2.36-44-g2628500f5dff... | 18 gpm-1.20.7 | 16 libnss-3.84 | 15 sysvinit-2.99 | 15 crun-1.5 | 13 host-f2fs-tools-1.15.0 | 12 slang-2.3.2 | 12 host-go-1.19.1 | 11 linux-6.0 | 11 autofs-5.1.8 | 10 host-binutils-2.38 | 10 host-sentry-cli-1.59.0 | 10 dieharder-3.31.1 | 9 igd2-for-linux-2.1 | 8 package/openssh/openssh.mk:... | 8 libglib2-2.72.3 | 7 ocf-linux-20171122 | 7 efivar-38 | 6 host-gcc-initial-10.4.0 | 6 musepack-r475 | 5 brltty | 4 btrfs-progs-5.16.2 | 4 dash-0.5.11.5 | 4 dmraid-1.0.0.rc16-3 | 4 fbset-2.1 | 4 frotz-2.54 | 4 gerbera-1.10.0 | 4 host-berkeleydb-5.3.28 | 4 host-pahole-73383b3a39afe86... | 4 libee-0.4.1 | 4 unknown | 4 duma-2.5.15 | 3 gobject-introspection-1.72.0 | 3 hdparm-9.63 | 3 host-binutils-2.37 | 3 host-binutils-2.39 | 3 host-protobuf-c-1.4.1 | 3 libgcrypt-1.10.1 | 3 nanocom-1.0 | 3 procps-ng-3.3.17 | 3 tstools-08f6be304040e7b8476... | 3 elfutils-0.186 | 2 freeradius-server-3.2.0 | 2 gensio-2.5.5 | 2 host-riscv-isa-sim-1.1.0 | 2 libarchive-3.6.1 | 2 libsvgtiny-ea9d99fc8b231c22... | 2 linux-5.10.145-cip17 | 2 linux-5.10.145-cip17-rt7 | 2 linux-pam-1.5.2 | 2 mimic-1.1.0 | 2 mongodb-4.2.18 | 2 netsurf-3.10 | 2 ntp-4.2.8p15 | 2 open62541-v1.3.3 | 2 openssh-legal-info | 2 openswan-3.0.0 | 2 perl-5.34.1 | 2 portaudio-190700_20210406 | 2 sdl-1.2.15 | 2 toolchain-external-codescap... | 2 vde2-2.3.2 | 2 wavemon-0.9.4 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 android-tools-4.2.2+git2013... | 1 assimp-5.2.5 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 check-0.15.2 | 1 dahdi-linux-5c840cf43838e06... | 1 f2fs-tools-1.15.0 | 1 fftw-quad-3.3.8 | 1 file-5.41 | 1 fontconfig-2.13.1 | 1 freeipmi-1.6.10 | 1 freeradius-client-1.1.7 | 1 frr-8.3.1 | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 gauche-0.9.12 | 1 gmrender-resurrect-0.1 | 1 heirloom-mailx-12.5 | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-12.2.0 | 1 host-gdb-11.2 | 1 host-gdb-arc-2020.09-releas... | 1 host-moby-buildkit-0.10.0 | 1 host-rust-1.64.0 | 1 host-vde2-2.3.2 | 1 jhead-3.06.0.1 | 1 lcdproc-0.5.9 | 1 libcap-ng-0.8.3 | 1 libcurl-7.84.0 | 1 libdnet-1.16.1 | 1 libopenssl-1.1.1q | 1 libxml2-2.10.2 | 1 lxc-4.0.12 | 1 openal-1.22.0 | 1 openpgm-5-3-128 | 1 openvmtools-11.3.5-18557794 | 1 quickjs-2021-03-27 | 1 reaver-1.6.6 | 1 refpolicy-2.20220106 | 1 tcf-agent-1.7.0 | 1 tiff-4.4.0 | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 wolfssl-5.5.1 | 1 xvisor-0.3.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/78e5c6b9d42790e6184bb471fa1e4a892631574b | nios2 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/1dd3cf6031ca6737ccfc2bdbe8fb66a79d858764 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/afc7e0e5c47a9c5578903812f9a81a02db5cfdf0 | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/8ab7968bf61156fdfca4838df9a832b6df30b3bc | ORPH arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/09efd495b2577dd423b0090c04c6ce53aa198550 | ORPH powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/b55bf719c2a55e92a4ae7d6f559858579e1d34da | arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/23b32d7669b0dd83ad632034bc27003246d23163 | ORPH arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6b58cb73a392e8b9bfb89e416776ab8a09c0c07d | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3c762ca824d41f6ddbd91332e9cc6bb967e72bba | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/eef5e85ef0981ddc1f71a8901b37195011c87dcc | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e0c7d6d50f1627666fce8958b411db7ba0637a2b | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e5f79f5939c7f0f05ee6d03e9fd2b6fe45e38609 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/bd23a70abccd6bd71f047a963ba4475a784afc28 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/926660edf31425cd7e8155a0321a083fc50f2280 | sh4a | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ffe774ed0133dc3bb1df9fa79ec28593f5326ed6 | armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/0e8445ed3d46beddde5b25b7c2aa9217a8fd683e | sh4 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2f71f2e79a72a2d630b123d5cfafa6d3a03d1a03 | mipsel | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/30c2294b496bb91a1f2bebd9720fd0df7780b0be | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/63e1b29c5b17b82c1deef95eb8a747eb77ce70df | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/068409ef889eae1e52b0566f6fa2d7a0a0f01d9a | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0ef5aeaf18dced230c6a3895aa3d074daabcc1a5 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/93e4d14330745ceb1f54f9ede5d3d6a2678b0db5 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2f221edec5b16e0615e9cd48962d1d395ff8ba1d | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0603a942ad1187582464d68b0fafb56eca749aa8 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7ff9898a7d5082bac85631e39acc9c87bc800f05 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/178fea79449624c283727d3976d2b15e14189f87 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8f54df01ac78ab9e33470252f2c39ff0d5e4c6d1 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e33875d7c519b9dc2d2121cf0c7612e4eb4b158d | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/74a9e6c2fd5a0898b57afbf9334392e098dc079a | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/83489d54300ed6be277298f1b2c900ea4e518d0b | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c9c7dc9c4973065307a318df9751f4681682c1d8 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ec976cf62d9c49385b8e9eba9c61a1b25f691c17 | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/84abc46cd1abfedfc4016dd5d11beb36a00fa864 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5449099214ac680e61e6a9ec5107b20b511fa60a | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d9da269bcd1a5553235bec81a7239f26de1853ce | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f6ac71759aa3eff78846f62fe02128ecad46a6f0 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/7d9b195b36cf8697ae73011c201dc956fca38e6c | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d212dd048bf266dbba9f92bde7b5db46e04a1747 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/645fdfa563379c64a88b2de9ba28983dd9deb7c2 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/bb6751f24236c47a019854a9c0178693600f20c2 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ca420d17f61e80b2be38b40232ffa15ed1a9b912 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8e2d08162bac46eb6ed577233717d0bb12c42b0e | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8b3381c4128efc13a7adf16ad906bed561e0dc6e | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0f6c02050b1f7627ec8f17a693442872146091f4 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2c51052fbaa2d5135a1e05177b9691f909585d01 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/80cad60b5a6440fbe8b67a07268e2731e3dffb1b | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c913e2f8fea075a13342d3db22ab82f5d488ed4b | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a3ea6d0800d2f298ce00a4b3889315e9819ea49d | sh4aeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/46e28a38c0d409c04b2fa97f03c87741821358dd | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/90911dfdada2f9cdcedfe590647c2729dfb9e1cc | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3fbf52f1dd3972b1c5590f6f55738bc4823fc080 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/590d2f1ab4e42be14a45ee6d8b28571ab13b3779 | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5a71b119c375a181ff540b6c3b8ba78a8c642354 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/db2eeaf26265721ab743ae3df172215fd31c70d6 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bf181685c40005a63d1784ed6b4a24cee01dac90 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/757d609444d8e513320aa0258ac689bcf8722f4d | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ddbc84120414c01796f774d8b8b8094e1e3c7b35 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/16c0070af89964cfa0157523e4f3a1244bd942e8 | ORPH riscv64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cf444d8d732593f4d3e968c610b900422bf96e76 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3ca4efe71d8a1446d2907dee7c52b81ff34a743a | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/778adc699f78cc97721909e08874ce7ac89dc661 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/82d7ae5b32b96caf7f0473e694107117bb7c5d0e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/24296610d584088e656f5c802e82726d73114335 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3ceab8bfc2a11462175137af9b2418b32abf9b7f | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0167835d718a8e976f182abd345f9b9134117fae | ORPH arc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d698c62776f9d3f89a9779aeb0e534d359e80150 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ba45e27c8b1828d504563e307f7bffabe58bbc4c | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0aa5f338b963f5608b3d5f7efaf893a0e1bf960f | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/00052a9592b3ba89b27328d84fb54bcdf7e62164 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a9c4781f974205a17a2e49340014cd03fffff1ae | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3f2892fddfe72db77dbf7c678f33ac4e89227588 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/603e90f860bf732764fa69b28fdb8c0fc2418b79 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/86143582c1f11ae5e5f9c3a338bef5fd8412c377 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/072244a06f468bda666551755026ade06e8f3622 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a79b9abe877137eba32c3cdd030a982017cb4d25 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d459e85cda0ba4139839a56139578a84d52cc73e | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ce15c48adf23abeed846351941ac457e4e4f2197 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/442d558f09c49309be37e18fe627e64994bb710b | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/cbae8dd7cd12cda767ced93fb158c16745484ae1 | sparc | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/38bf76e4618047f310e208f4372b92a05eb3d6f7 | ORPH arc | brltty | TIM | http://autobuild.buildroot.net/results/59e36093f7e437a5a37037f7fa50ce2443c47fd3 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/06c9414a1ecbc1a147bc8dfddced03fc659af694 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/82af705f7ca282495461cb3994f5a7e6f64273e1 | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/59ab880f8c3474a3cfe765205787e0e83cb0f03f | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/bed253d3b198fa6a9aa86467662d4b1093f69db5 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5d9f5469ec1db831c6797f8289178750f1eb4d10 | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/54ab55ec099d80f9a646dd13b61b9982ca03b73f | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/7286047c3aeedd7e7f44f30fded6f46b59c28c10 | ORPH microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/19208bf56df573a1506a634aef1215ded926c06d | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/563464518c5a6df7d912078b3c7118898570d4c8 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/bebae5bf40cf95710ed1d91b9104f67aa121d3ab | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/97bb3ff45d54770a885a2eb2a3997b1eea857de7 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fa21f3f19623e15e784f6c01447e66ab2a488353 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/77f5b78eb111d935ae35bafa4e36b5424cb2992d | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b378af0b6fda6e2937e742169394fd1fb4884f75 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ac594c757bb6233775c19addeb00a3bd959ea89d | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d16b333563474828d253830e2a873103a19ccab0 | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f7c0b1b98c33e91cc5ff43e42b33cf63a777bcab | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d8b1e6156c43813fed9f6fb833d174aee77fd199 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c3998478fee13a1a41cd15ebcd7e6e534de63572 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9417220aaa2123c7f81a57109af2317ecfa9a59e | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e4955db53ca59e5ae84fbf38c3d30e6ad568bb55 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f5f9d622641c65d381ac5dc4cb2fa8c2129ab4bb | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3a21b1f2b7a82b7badef1cbee8314354ded75d5d | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c835ae6a6b050da353d40f528c880e9c544f5e7e | sh4aeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/572c91e52639d20395ead73abadd80c196bb82e4 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/132665ee26a9e94f9b9c95a130d9a9183231a75e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/286f5948c19def197919026ae9a5e7b1c50b85e3 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/17178648f1571ecd779f67a4a2e25bef103b729d | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/128c5e769dd76371d00cd3baad3278b2929a4587 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/1bc83af821b80cb6074aea74047f098ed0a88e4f | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/50ca2c7fa6e8b20bde584750311b928b5ad59233 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/f3da84d29bebe843c89834ba4f992e693e9dc15b | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/70a984f08145e90ad5aec9c8d01e81fc5a1a641e | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/185247fbe882649dbfd2d4e2f080ad395e087718 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ec19cec6d404628c99ba25f70d709324e1cbb0ed | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/004e912d57a16df3ed3a46e01731cbf6f13b0093 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4cb46ebb8cf3818fc05926b75d7569a772f6bb1a | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/49c2421c7cdd43ca62b38fa58bf12af2d0d832b6 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6baf9ef738633cc20af4e850781875df003c8ee8 | riscv32 | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/a0aca02432b01acb88ab924724a60fba3bba4a07 | ORPH sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bf5d9d56ffa7ecf6f3af7b8a5441d4138059efc7 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e520c59f39c9bb847bb179ac8bc16f699cdc8036 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0a10a078af47b8e48458e9cf2627c37bb1501baf | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/53a4c6c8202fb43f0f1908370a05895ef26c5424 | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1a3e2cbcfedf1a74e087cac36ca438cba045da5e | mipsel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bd32f578319d7a1319545a27e3eaaab3f302b39b | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ed2887c90ec0b20aae6f4633cd5eac1e5b99cfe0 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0da2526c9e476fd0e91435345e1f51320d509f42 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/697f3ed518e985f0ea02e80a4aa0461f642055c8 | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8d3dc215c8c501614109e13bd6c9f2bc022810f4 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1ead1f59417b599f76d4ccbee2134a57ea22c272 | sparc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/940cbfd7af03b66e927b5cccce2fccedf5810a54 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/95085a7d8d794fdfceafb77ae9ad55f374584d2b | microblazeel | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/29834403e4132d9d219438772aa886b5867b292e | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fe887b4b9bda0afd49953409a42cf1be7d79865f | xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/c971d4f9de029ecfd5659c71d840185dc86d3f47 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7fbbb42063bcfa1610276820f274a27a74e77d4b | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7fc70bdbaea6bf7872c0572c905372f71fff73ce | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/35bcae6f1dbafd48b80123536ff175e74147daf5 | arceb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/589b74f70162f4d8ce1c1eb8428403863d5fc60d | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9f2299a313378593888cb790ec4c46a9e5f5b2c3 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f2dff27f5a7b6f30986395d9e44f3701d311f214 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9bfc19943fc46ba6e0e00181c198cb0055596c21 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5274b83dd13870190926cd3c967bada1ae69f09c | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ebff03eaef78613d377e49f0c5399efd62d7ad22 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/abcd4302483709b7f40214c516807dd153952d0c | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aca662d7eebc4ea4861f64b54202285e2a62c30a | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d996fdb506f815c0fb5cfc010589e56eb68df215 | sh4aeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2b2014fdbdca9f6792db144bf819d38b0052adc0 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2ef99748525be63a572f1ad468cdb409e195b880 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/25f230eb2ba0ec383d0b2101f99611dcb1808925 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/74c2f4dec127d245263ce748feced5db79c9fa4d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8c5cbbb5c609687cb1ad7c67ec1fc1fca0fcf65d | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ae3d36b65eb79be5187910ec81c5ed007f18a6c0 | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e82ffc0f35ed3e3e5ded16fbb9d9c1066b7b7932 | nios2 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8296612503f0f929e39c567d70a078bc058aef98 | ORPH microblazeel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/352e5f98eeae63f936a87a8a0da67309920edb39 | ORPH aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e03490d7bf8a346d4f9093875c94a5b8729863be | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/3370bf13eb13fc696fa1d99b684384dfa0f31459 | ORPH mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0f9309f5f703306e5573891028501ffe1d334953 | mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5fecde1d02216a2302d9e0f632bdd80caeb50fb1 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/1617f29dbcdbc454002c90500d3bc888ecea26c7 | or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/7b154103320a6679c85e74c7c0233719d1107e24 | mips64el | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/d2fd4772fc996b0fb761090eca1a20afb9abc762 | mips | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a3c80d00cfb24017fe6649f874ce2c0f01067627 | mips64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/3706e11f1e7183ef428c0b3472cad1aa8d2270d9 | arc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5f1be17ae48d3dab39bc2ed2b6b7eb34a1fb7ebb | mipsel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/a0b69b5a7b76f61a02463309bf264b104cc78227 | nios2 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/4ab2bf58fba6f9ba32be81b1ac8d26ad9eb33092 | ORPH mips64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/2b6a29f15be8566efeeb3b53e4b0710aad17b535 | ORPH sparc64 | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/202a9fec3bb4d69e149a064e86b26730063b3656 | ORPH powerpc64le | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/80f594831240f6a22d2ca13f0b8a7819fc2116fd | ORPH sh4aeb | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/759f5e0bed3f4724422398b70335955251be43e5 | ORPH mips | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/87faa5a09d6312ee64bbd94cc1f6f0713a8a453d | ORPH microblaze | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/a16e78f93bf2bfa11a41f397942de613769eabff | ORPH arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/797b12ec99147efc89f5f9d3fb59d936a5716370 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/2730af17b6e49ed8e3834697115792f7483f19a9 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/8a02c5ce5186b6ede7cda3ed61930b096046dde0 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/020077023334692a3589930f27d080f7becf386d | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/48ca9534fcf07ae2e05689a4888f8b5b8780ced9 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/c7cbbf39eb4de5ac67aa6d847e9317c10c8d07a2 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/613abc1571c89c86ed18fb1c54134447c2284d60 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/eb8974c208bf7402cd008e5f180dd250877cd379 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/421dcc9da8c0fe5d9a88d27ec81c6e1b39fd1daf | powerpc64le | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5bbec969edacfcdb9cf2dbfaf063bf89797f8360 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/bc9139c497d2dec281a3d6abb1dc3681469a6bbb | ORPH x86_64 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/531e3e00192b782c8f8957bf863bf012598f9571 | ORPH mips | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/75114d76d260114b88b1d12ea32883b2bd133896 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/537cef486e9f8e6880c5f61e645d4ee6f64cd10c | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/76c788e6177b4a70bfd54a094903806c44948f99 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/399c8f192e2fab672625c9e26e4818f780b6331f | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/91350d1be1db52b832544413da240c7ee74bafb1 | riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/7ee7e33c8580c9c45cc90e657ac00e85d98c50cb | sparc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0b45c42dc998492bb8d2efedd747c88624642eee | sh4a | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b65e89597303185021673d174b00ac28e3c99ab7 | mips | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/d05f9d9af6570d9c4aeda993d9a067eeab83e567 | microblazeel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/7b27c31ff298055c85a717b2c9daabfcb17b7868 | m68k | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/06653ef4cf8f83fdd7cdfbaa2ff05b09975b87ed | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/6335f232656af01582ce60537e54c220a973a77c | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/f8809667bb1762685a7d244fc170b2d317d1280d | arc | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/82415f025bfe3af6de0d7765275611f4192d841b | mips64 | gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/91a05522442792f0ffbc676084c59710cb344590 | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/54fe829c281a6c93ab7ce069458019eba96a97bc | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/d370110cfa5a77b9671ed21a39d345258aea0e1e | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/2c1fd7de926b9fec0d783c959bfe7e23b1205eda | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d1398abc85174f0cb609d7e651b9d5a41617193f | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/688a13a7bf628168f5437bd582b74caacff8842e | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ce3df1c4a8b28d9c7f1a51980a8666f73042ed29 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c007889f11c4fde45c624ee8afcfcda23e8f58f | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2c90b79ed301b8977124462e942d6f93200c4273 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b22c3846d6d5929e34bf8a336739dddf6d2cff68 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6abd82fd747efe7b107bee30d86bd1e53c4d53ac | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c3b1a190376fe9bf5733d60c4052931891695e0c | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/55d83f253b54248cd86bce101fa6bdb8e633ff56 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d4d94f8c71e89e068563d7efdcad4eb0f50eeca1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3d8d843d3fc8b75bbb6eaad1fce935997ac22991 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/015cf6357d621af1d266d58870bed58a6527f8c4 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3cf7b738e537c92c3d6d74c73672d9a9cde170ed | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fc8f67b9f5533633f841473db471fce033bf27c8 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2ef0acb598537285a2d4e8b018eb92c60109d90 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/76bcc3d7644185c4ab2f2480d78c9954e1389ce8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e21787e85f430a4f27e973aa8168db78219c4cc8 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/610d1e0f9a63ca93fdad4b7698bb3d2d20729ca9 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da087bb72c749950b4450e7cebb5b270167ca7fe | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbfd89462cbf3c3e98c9cf8caac42396cc4aa2b5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0c69b46ce7dbdf7c1339c58f39e46b047cda0054 | nios2 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/8abf87e06166767db9650ce101d4ae01804faef1 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/37b48eed11191805fb0860b0534a55cca73c621d | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/b2889696cea9962a933a1122d23a4ab2b4beb415 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1e4a55cedbe399d388ac82793a2d97be04fed540 | ORPH s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9b0181b70d98bee7befc310b6b6b50d41e27a383 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/9a8fe328e4d4ffae00ba43b796956b243c273942 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/de486e6d20c48d0bbfcc4bbf68a0e6a4860cdfd8 | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0568f6d22a10cc95e5aef21cbba46b7f73b52c2c | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ade6a67df692aa4b2583f410d70d4e6c6f3ed113 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/08a52595fbc668acd2596b668d27e1eeb019c1a9 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/db7dc919c3c2caf65c1f1b29f6f311413b513df0 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/64f4ce11c905bebd815e1a98eb792d576b440a34 | sparc | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/314a46834235a7a7e77847510b0a4f73c41f3c60 | armeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ee64267b4e179dcc042f91a36410e47810cd05d4 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/11381004064d809a303a2c869b371d330dbdc14e | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/cb710ef7dad654ff18854e4b960d83785377a22c | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/ab19ec2e051ab4cc1de8bb10bde545cd56dd4d8e | sh4aeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/c5b99ad98f9797ecbf9bb3fa26227c7b0352f0db | or1k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2abe63ef2f9bab5fffe77b5d6579540f64818930 | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/3f53d4b3f04eec5f844b52c0d4395d506608c848 | armeb | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b04848888ad264241f6fe4d440820783a5eaae45 | aarch64_be | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/b147c786ec35947b4f5ffdf5d7f4a0614bc2589c | mips64el | hdparm-9.63 | NOK | http://autobuild.buildroot.net/results/68c1a17ed436a9e0fdffa130677a622e9259b979 | sh4aeb | heirloom-mailx-12.5 | NOK | http://autobuild.buildroot.net/results/4f2afbb9fb7a532aab327d9109e7c9d0c1f73ab0 | armeb | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7d264d104dfe085ee928726dcd98c502cc825089 | ORPH powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e55119bfe427e35ee093f7836a4f1b40e3c2136e | ORPH nios2 | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b94e28c50edf9b46c47387a56f361cd1984701d4 | ORPH microblaze | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c1c819f7c00b759e0394b0430c0fb5a9a50968aa | ORPH arm | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/0edab6a5d32ec9ae427f48cd0fc83a9fbc9a6bc7 | x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/8b28120e3c53b2170125434bb4acfd47f5b8074f | sh4aeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7211aa4bf56ffd7a4ef8ec4f726b1d021e00fe31 | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ecba04a1bb7d0fce799d868fcbfb46ad0b95b6c7 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6f71690e97e3006c743f0519c2d353a89d68bfb8 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e0254558e91cf9d693fb1b107de88eb5f8d0d458 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8cea6f16017dde0ee7501c32a6f3072c13646398 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/39c1caec4df1aa3c005b05d5d035a34be2990c78 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e97e61cb73b03da14ff08166e27437669a75a62e | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b24bd663cab7c2c14b95edef20f92dd4bdccaabb | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2e584e8e5a4c640f32a8549906dea84a8ae24de7 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f1ef96ae66ac583083cde885901a75dd66255b28 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/979eb3bd538076c717630c877f90ccdceeaa9530 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/4811cabbe31c11ce87f676bd0a9dddd674c203f8 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/0d9446e12ee4d9b24fcd8a408cd313bc076d9deb | nios2 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/68d901755c92d1936d04183875569c8c64bc9d95 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7fd7c5a42f9a31430af9d91ad121cb3abc1d8734 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68ca56c72d18e9dbc0d61a90af1a525a353a920d | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3d0cab0d2b785cf3a3e455f400bf8f3860eb40a | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f22ed6476d8c380a38d03e833f965b51c0b8107c | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e27e4caf78111ffb6c80af9b02fea2c3bd36d0a3 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dde86f0b503558054a50f900d54dffc2ed9ac628 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bb6765deb7c128abd07d5f25471132f6b95ef10c | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/1d081977dc48b85147fae629cf8fc1b14c5ea16a | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9c4ef67bae024ec33798fc288cbfb2e4bae215f | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8558ead1f8d6cb8658f10695bf50c6edab8776ef | mips64el | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b89554090a78ba207d14580f52addf36130e3df9 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ba2c1a6a4db7417caab14a599d9a8adcd811f7e3 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/d1578c5ff400e597faed6d092357fc25ce503e29 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/93946c4ec0de12574f69afa143bba32b5cec2335 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d7e1436dbcc54c18a802697b5722939f66d4c2f1 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eb1c49f96000838802ba02096240acdd63615cb4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0c3d47a936b49153c0afd91abfbc69c5d963dbd9 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cc2de22d7a36b510cba0c30439306727fa50d086 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f2e31585c9c1a75b60f3f62ffd98f89c6ee7372c | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a618505e2967afab0fec7c3d8ce3d600ad87a636 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/96f62ed375163e65e3ce396dee0e62436fe59339 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d9df79239f4affbc1ac99e426bc2f404deb1a235 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/aaaf1d508ffaca02820596cd15d8ef86bd1318cd | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/314e8d81e4eb6b5f99975e9dc5266afe0fda9ba4 | armeb | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a80325d27492d4cf0c6fcded80dac7ec7f84c1c | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f079c83087481787acce80b953179fc9ae60e064 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/90928cc9fe43e665cfa4d8acd5ff68549d85dd59 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/78c103b8ba1085e90fc48526cea4383151f75024 | i586 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ae8b8a9422deb6b1cd167267c2854d01124c8f6b | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cf929ba91fc9330111201d0150d1140e7c14bab8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b962555bc949275718222db4f4c4aa5e0bc26ec | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/8ae4b1e53207dd9287a91423a64be40431616946 | armeb | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/b6ed4c5e765cff88dbf2cc174c455e0aed285fca | i486 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/d6868e37bde13e4571acee1a6856fb059583276a | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/775049bece0056908161192773f6d5277f3afae3 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/526c5dc463cbf84c9f6d9868c195e11ebd90d13e | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/915ae90691b9df8caf25fc02862f754498d760ac | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8e70e0a35ae5c8bc78ec1d0905ffe30093cde907 | mipsel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/84d6e965d749a2a472e600a6e6041f250df24aaf | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/23e0cd08237883181e4b71cfd0ff4c50462b6117 | mipsel | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/365c466ac58c6701cad3b2cc7dea2df521e8c9db | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77ccbcf82eff8cfc23fead1b03fef12ca231451c | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e2fa9a8c3e9dfc760dc8421b820a5dc02796454d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4c98e2d31379a3735085988426ac655816d89abd | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/182f00bf74b381dffe44b3273ac82ddce2a44e63 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/bbc807e7f87e36ca1acce5f9f6073aa4d72a90b7 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/02f3c125095941672acdfa8e04cf8e49efaf2cef | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/70db99f0d2f2cff4539aa1c71302c4027ff62231 | xtensa | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b3dab8fd429a7435f9fadd2822a6a1d078aa889 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d1c930bf4a81f3328a7f69635b2959867ae3208c | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/29906b1f11be0ad1586604b7f012442c9aac24c9 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5f0152315c529d83b4db3607349e01702c793c42 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ece8fb406b5a5c96e61a7a400f517c4f76739eb | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c73d43a11f3a9cee6848c2241bc9b870c28ed2e1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/092d9f7096a2dfbbdb027f04bbe9441ca72d8edd | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ab58ed5de10314590fe77029bffe1ee069fcde61 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/cd52a80ab6dba05bde55799f4ba4abf123166f99 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/cafa50416b5d4f7c4c867703ced0abb0750b40d1 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ff39e16376b753401f5b52ff00044501abe931a3 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fcc573e6d6d2374151f21b261b10b018d107eb18 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/fc93b398ceb0019eaa55315d919b3de1bf599bde | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/7ed9c7377f831989aa2e3e5fec4e1eb5d1076b8f | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/027739a3658cc2c3068fbb2b9e42dd650241129b | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77e91d226015c0138d50aa5d039a6774e110f90b | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/704e80dd2f92bc4df95c3b7818a96286c77709cf | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/5a264fc24774cf5138251ea3188506696d21d9d9 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d63f9fc6e1f025c481acbc39c0beb80ff5ad54c4 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/98bee4f45c09341ee88f36aed452520121261f6d | powerpc64 | host-gdb-11.2 | NOK | http://autobuild.buildroot.net/results/0bb5868be418ca5097f6e115348cecb5d7179fa8 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/c70fda6bcaa0c5693cbdcb1b46efbaf783b7d24e | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6141f75964ae1934aee5062d688fd0a398797e45 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/32e1d9b41e3aab396924b4b909e13ff647eb8c01 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e14007675306590f82f265eee2e02fb485b4d44 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/de00115d79d4f56f7f34320ee09bec6d189788e7 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/026afda547d8ad9921a7fe3a1e0a59c3dbe069d1 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/527e888f443397d13979586d8457f1054903c803 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2756798fa6ddf3df90a36c823053197a6635bef1 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a86c33fc570edb8ee5b95dd6ac552d55e7ba5234 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e440caba82e6480cb3c4198c553901e59f74598e | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2793f6812928a120cca0f51ee685b43798071154 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/51119682fd942643277bd26bf1753f22443133f8 | riscv64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/1963e2a20e5f4a070141da7ccab30d9ddaf4bb9c | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ac2976e47e8e75351ab396d303216d694863828c | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/aaffec93e42ae90b726b197d9fd9bea36d38cb47 | arceb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/039a7163f1986c6936a48e24d2577b3677205ac1 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c4e46675060666e94663fed3db112b8e12581c4e | microblaze | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/7422f83b06bd5af56ac74e2406d6c1bb050616c0 | powerpc64le | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/1b43c88f7530ca3e0bddc03ce3fd25a8ea703a6a | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3db83fde52b27472c4114dbbc947090ff286437e | microblaze | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/69d43511d4c991fa14f17bd60b69c4ebda141d21 | powerpc64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9b32a1a00efc989ff06821a8c09f85361a7b6f74 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/edeaf7c54c7f77fc64c9513f85e9f11769e1b929 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c675ced0f5a5511c530f4e83fc73458a24b5bf47 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5e91f0d853b098d00491078fbb40721d3ade4acf | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6d7e9ec764081d4986dc096f281bec1950fe9e9f | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c5c1ca0df53381ee1a4dca1a6f17cf4ed65d152b | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cc2e65c4d514152b68588de11b88fe415a5964ec | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fd7699c3db7018a9f0500c785a115419783295b6 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f42a5800c535f2c1d656fc0c6ff01d613d411b9b | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08c0f743f20104f6071b360c4445418bc23ce0b0 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/dc9b292d8c3a0ad2f7257592d50baa7792da17f5 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/733112350785f6ff7124f22869efa85c8c86c137 | arm | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/e4fe1aac841d449425c84612fc3c39f072d7c6ae | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/99bf338bfbe4646c0e50bcf6724a9bece1a0efcd | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/372574ed58139636184209f3102565baf475fd1d | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/068f3cbb308a23cd8167da6220e1bca5e6acec8a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7ab1cb09e7620b69172d23411fb7af33cbea8c72 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2f2cdb840672e44f60dd7a695c8de7973871f727 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aeff18b9c1c44beffe8fee5c90fcede67ad9cdbc | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1a008e5db397161936784c94f75099093a3ddeb4 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2eebf8264327bd492ee8cadc0c539d42c4f2e252 | powerpc64le | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/b9980d150e61052802fcf5a26d36ccdf00410fb2 | ORPH powerpc | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/4e06cf71faff1e3e89f7e04169ce6882cceb169c | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/11ec3edb8790f602a93a9d2d353442dad94b2da6 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8fcbf3eedf789b725c7d6dca8af5aefce4c212b9 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/11a9c6e4ab1a0ed56b3d8b221be6d517f9126a38 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/76122eec98ef56001435cea154fb1acad015caab | nios2 | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e | ORPH nios2 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/e49b9b5a0e05b7ec69965c4a3c4cc924372cf94e | sparc64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f6b6eea17d48570f8046d0a9baa6758f4e32c46c | arm | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/f19e054ed34a87ee0603c6907a907e7ad5aa8a5f | powerpc64le | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/44a40ca5ee4b8c2bff09d896cffe14d42529894a | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c11545e65bfddfbc8fe016125d1cf740fda8f847 | ORPH armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/720b3c849383b027cd011c15b00bf2dd918f4dc0 | ORPH arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/61e5f0079f77aae29c6fa2101b2c40e841cf3b6f | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/7a13eff0b168a6a0e768fde2f8fbc2785ef340d0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/01f6b24a5925e4716287f0215677fe13d807439c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ad69d1bc76780d5596a554e8ca17369b914298eb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ad0be4f4e7ec3e34542d2510129143ca7143b40c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d4ca489209d0e4710cebfa03926cfcb27981b0f2 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/57145e43fd6566710cdca38f830a95ec72d31d95 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/528c458037ccd82fa15aadb54dcb49198e7e6d6d | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/507fb53e8b52f80fe1b46d22dbb7046c2124cf6c | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/119156f54a8f8d87aba13bad65441cbae2d7443c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1e02b0ab2de70263c4fcfa8a15a8b3a787583453 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/433658eb347cde1d69802befcd34bf348b0ee17d | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/351b6c2ab7cdf11fd7859bda6b95445ff858db77 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2e11e06ca2bf7953aae1af01bb1b3063e8f1327f | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/acdd05b84fdfa2f552e8420a00992e93da4e0deb | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/94a313647b23c1476af956563e5efd2c2dc5d2de | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87a958d3ba36fb693335cd5971f152cf1f3910cf | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/56e99855a2bde09b0ef0c3573c986aa5255e0098 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/26290b38331045d91ae5613ce1bbcd7724cee321 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d948669c7764c280117779ae22586f458ccaf1d | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1abc0412bf530c0d61ffe79a30bd6d6bd8250f49 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e7fd5ac451fd717138b0b3fc3181ab814e49b0fb | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9c240092023059db9ce3315daefec8548b1cad0d | powerpc64le | libopenssl-1.1.1q | NOK | http://autobuild.buildroot.net/results/d1ab3d5f93476afcbde79d8802fc0fef27b94664 | microblaze | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/498b411f61c39dc322468028fe2ecaec8ae74105 | ORPH mips64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/abed41281bd2f0d21ea5a985dc329f9f253860f7 | ORPH xtensa | libxml2-2.10.2 | NOK | http://autobuild.buildroot.net/results/18f5d9360bb6464713ea6be0b15b8ebeb24caea2 | x86_64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/3f3a539658c9c49ef0409a0aa6fb3f5fe95b6f7b | ORPH sh4eb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/297a98fd1d280444218203d582eeeca9c4d73452 | ORPH m68k | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/eb36f9ec365e66bee649b88cf273a66a72b4d592 | ORPH arc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/f8ee607bf748f93558ee9fad45363e49c8102505 | ORPH sh4aeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7716fbd44a8820139c8dece0f01acc015ec89b78 | ORPH sh4a | linux-6.0 | NOK | http://autobuild.buildroot.net/results/c4d4d559af8accc217b4cd5333e355cffbb9376f | ORPH x86_64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/bddffff9d19ec1afb0f872bbc3982eaa63f712a0 | ORPH powerpc | linux-6.0 | NOK | http://autobuild.buildroot.net/results/031c90b637145931482457001dad14d75978f88f | ORPH armeb | linux-6.0 | NOK | http://autobuild.buildroot.net/results/7f5d6ea3b0a5a8e9c770e1f9ed1e979c6b26535c | ORPH mipsel | linux-6.0 | NOK | http://autobuild.buildroot.net/results/648af2f0604b2613bfec91123181290c0c7b86d4 | ORPH sh4a | linux-6.0 | NOK | http://autobuild.buildroot.net/results/a985cd7c65744002e38ebd063471d1d2dd3b2cfc | ORPH mips | linux-6.0 | NOK | http://autobuild.buildroot.net/results/605ada98751cafe95d20eeb2ba7d0486241e9a72 | ORPH mips64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/e3c117ed82bf7384d4df6d1f2926186500df11c2 | ORPH mips64el | linux-6.0 | NOK | http://autobuild.buildroot.net/results/35fc352b4ff8497ed8d9adc0cc1b612928d77c46 | ORPH riscv64 | linux-6.0 | NOK | http://autobuild.buildroot.net/results/da7334f8233c1043577adbb65cb4a5ff0940c7c4 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/f9e1df50ac4473c6da4e359c0e76747ce632bf0c | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/e062e16a296f8dac44e7c9d5e39f7d7421dc6084 | ORPH sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d50e74b8233904126badfd3196d80a90c3808a50 | sparc64 | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/3600a4abc96e25315f2a6c810e2dcc06878709f8 | s390x | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/e320013c7b46fa918368cbaabe0630bd1745aaff | x86_64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/73f96d31b3026027bbf9ce4b594cff4e0b258101 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/12fca8fb2e7dee5168b6048537109630114a3778 | powerpc64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/3328a4fb317ddfcbcf8b101d9a8525a8ec09cf72 | ORPH microblaze | musepack-r475 | NOK | http://autobuild.buildroot.net/results/f9b249a380da4b1e0dea90e0e5e91aba3acfe192 | ORPH s390x | musepack-r475 | NOK | http://autobuild.buildroot.net/results/c7a1d0a9b386e1889e1f4060905be2aef3f30552 | ORPH sh4a | musepack-r475 | NOK | http://autobuild.buildroot.net/results/d622b49271a1d9e4b3c25d52823c7b43bb20f5a1 | ORPH aarch64_be | musepack-r475 | NOK | http://autobuild.buildroot.net/results/305b82f567e4b555a87ec38d21ff987fb19bec42 | ORPH mips64el | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/867c7aded9c1c22ed2b2d4fcfdb4edddf6f7ddd3 | s390x | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/15a11beaf098574ddcbe96e61f3d429b7d21b50d | nios2 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/9da2cc167febc8b71faf1ab1a3e762a84ed0eb1b | arc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/dd59745d3ca5392ca52dd95a921e083e8a29aa14 | m68k | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/b86d2ff346d837f71a7081520c036f22eec38332 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/147344ff0506f171c3bf9619d171e3e91d95f56a | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c58ed84b136231dbe1615f55341c8cbafc8d79a2 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/9dc991f88ed76f128f7329e8fac496c73cf724f2 | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/35b27b8633b1b5f1e2a1cc26ac93fe1482d8a4da | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5bdfd605ca8f2045450f1bef3e82e4375f27fc49 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/fd84803a0354cb27ea7b8f7c53b1759d98f5be61 | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/91db0745d7c260260def085819a3ae12ad683a06 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e35514d57c843f2cdbd3669926c795a4de18f09a | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5c83cca0b67606e7f156a81ed0d997844e6e77be | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/ca9b1beb4a23cc2a97f9817e198d23ad550687e4 | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/c9bb2f747ad186f10005bf8a3f16798c16f98921 | ORPH arm | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/8ef6b5c476c747020f3f51027e6614eeef1683d8 | sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/c3885e38714b562057a0317195592750e699466e | aarch64_be | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f6242bd5dfc3b4c841affc1cc31ac7c72bdd381a | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1333413453092506b684d52603019c31f74f9508 | ORPH m68k | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/149174e4c3fd9a2416039f81531be62c64f71415 | ORPH arc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/21ca84da0d3de0f3c95fd9ac81e9d1ffbcecadb7 | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/4013efa753638c5871b123f04c333e2a3976f6cc | powerpc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/1b2d287b563afa4fcb06fe6ecf37df59977038bb | microblazeel | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/14caf1a54f3712567aa267960f8c91892dbddaaa | armeb | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/8d2f41575c184e87645ebe1add0aa49e26b66668 | sh4a | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/133f95b7ef6bd4cd02c06233c4d1e0cd35bdfb9c | mips64el | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/d0992216d4088b3d075571ee30d50e7beb1b0875 | powerpc64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/84834395918de48f5b528d4959005ce39d6ddcbf | arc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/436483e8b2bcee488d90ca03bab34409c849a4a5 | riscv64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/f0cec18fd74fff5b2b91ec85b8e9b8e5f23c693b | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/06844aad9dc4174790da5678854166e0a1c3a001 | powerpc64le | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/5206fe7c08bfc1ef40696b3c9891596035bc88b6 | powerpc64le | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/e61c20a73cfedbec25be0aa72ca12e1c81b447e3 | ORPH mipsel | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/ba5768afd72420f756a9c8601755aceb3df79124 | ORPH sparc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/3c7557f030308c599c6c8b0f991319e96713e1ab | ORPH powerpc | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/78681675f647e5fc022f9d1969a864f1a07a6598 | ORPH powerpc64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/fb12ad987b8e1c0f8c86b5b723ef1801b06f567b | ORPH microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/921826f6cf0dcb3d00cf0b9e65bae72cad6f07e4 | arceb | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/31e6a6be3404add38fe890549c09bfccf4af33c8 | powerpc64le | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/0aacdf29e1c0cb4cf9c14a674da5dc7da7db149d | aarch64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/9d524de9a2228c625f37e75d447ee45fe7e74e72 | ORPH arc | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6570c0e2f3bc59658c36c1fce3e50d6c8334fb4c | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0d6499f7e318ebc73466847e65680381b2857751 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2b1e6cf1fd1f200305bd7420b065d87b8583975b | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1c82c276f6f7d9e05d2bbcb05d47244b31dd829e | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/1937e17df21c1d81b1bcc1756a98632d443f93fe | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c1ab1167208a8883097c23b046d900754daefa4e | ORPH powerpc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/829fd0a4e957750baca58a57bbc09d5e05753b70 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b060b49ab597b4ab80c16f683fbbb88a586c51b7 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7753e0ca864b0f625ab70532354afad05ba84cd4 | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4bd9f930d56a884e9dac9402c687484684656a9d | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b83754005952287b6988fd6292afdb5e50650f6b | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/0799c44cd783bb30d99497a8e0916a9c34fc4d3d | ORPH sparc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/b774271fe8c3f2f59a2cc18d06d45ac806ce935a | ORPH s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/300d7fe6820f90d30a8819eb656d827e3848fee1 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4a798d8a3dcc7adaf390536c597fea3fc6c126f6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/631127bf2d0d0e1b1075d591d80e20233616c0c0 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f33da6c9fa8c4c8dbf8fb7a4ceba1fff25b987ae | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1ce8dd5008995631d7d86d638db86472d884cd88 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0c62b45ec8a545ebd0caef55774d49ece01b0815 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b0b84c0fca3c2cc7c8b7f838dec5c592cd523ba | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c7175756cefc951e036f52ec235ba42d516547e6 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1c3c48b8df8292090be61bcae8eba068489b747a | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ceb58d7fe50f56a8b8b38b9652cef0bf8ae48fa4 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f5a09339a05446f28d40e0e1f4f64d4454063279 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f8d8c4ef4e4733bc4f336809a3314202be7e045a | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f7ef7cafbbdffc9a71550426b0232e562ddf5ec6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7a6be774b6afe318543481623f6b299d66ad33fe | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/b0bfae798f9872ecc2fb9a1be8a3b266f5c4e5bd | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/14713962ba365916fce0e8a4ebec469be0559876 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/08f506147e69e3f86e15262a724116b4c7fbcfc2 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/56b10b629b2efabf112ab2593e22b050c6dba6b0 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9b471a5b640ad90832788d55be532a545c56e92b | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/72172f241868c3a3ef716396783c0f7a6dfaad96 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/de0b90fbe73c2b911bcce49369524846d25a59c1 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/733a8f18dd53452b2c65bc4c7e8c28b564c2a61f | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/89e968c76baae1c4cf908217b60c907725161aa7 | arceb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ca02f50ca5a6b5f8438ee051a8b7a7a5a6f71958 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/77fe0b68e4d7176bc275bb62f18794c4255c9681 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e1381c9fc1a90955ec305635b060b22807daf4b4 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0fd978c088a6e795dfb1c6465218767b728f0174 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c31d593f180dac5eb2ca0763204f26d84d4522c7 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bc4504723e84c3dd96fd3b25039645512b8a2dd0 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/88f37f362cbd67fc0a65f014a8343356e8653acd | ORPH sh4eb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0d88953ac5097b1e15f064a93dd9ab135ce37990 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6e67bca6800f8732fde34992da8fbf6b274acceb | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ab836555bf1322c04c8843aa3d9c5a90c385bc63 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/59d75a2fd966bc5120e171d8033af15f8a414eae | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e2583f9206ab877085570e320041205ae7b2419 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/af49de68427fe32d7e9f0bae0d77c114301e7f66 | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4de89daa362136d5fdfbeb580be354bbb8715c84 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/838020eab3f34c5aaa50ddde805564d2364386a3 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bb41841826596d0b49f0d84f465fc556c9969d4e | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0d972307ad2d5459be9866eaedf465646f03e449 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/0ed18b82fd23cf6ad4452f99b3e7757f854732df | armeb | tiff-4.4.0 | NOK | http://autobuild.buildroot.net/results/c2ab5318eb0fc97b1f949e82549d46e91959503d | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c880702bbcca8d95a2ed814f53be4e06e6c55041 | ORPH mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/9670f8e5b1f65299f1146dceca217b84be7c53e9 | ORPH armeb | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/a028fac2d625b0d61be3f7dc307765f1de91b5c9 | powerpc | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/074837f0a6b3f6ac4615db868b01f8a480c6969c | powerpc64 | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/f13273cb65f80c681cec136986f12c659cfa5368 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/24cae7e26564467f215cb26bb0f4aa7443c9699c | mips64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/80c258c8e157d516c8314de3a6922ed7e06d2b7f | arm | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/ae7ece09646536cdc248f640f190cd85c9df27db | sh4aeb | unknown | NOK | http://autobuild.buildroot.net/results/d170ac638637edfcfab9d45c7793edfb519217e2 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/e85af8698b0f08b40e1b23e0a81542b068f928a4 | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/faaaf52b3813bff8f7e5a4a73b207dab8d072ab1 | aarch64_be | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/c9403e8fd3bdd9d3ff41b974fd8afd4430f00c15 | arc | vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/468aa35c79cc8cbb34d86325c0b544a4841d14d3 | mips64el | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/6591d57726620d18987167f08317dc1679cacf26 | ORPH nios2 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/343fea7d2c348de1d46260462f425e657d74a2c6 | ORPH mipsel | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/7ce3854e28065a8d9ba4f65c7c9c601df3418d91 | riscv32 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/eb27618ea7ab6ebea09610d28056e07fed623c08 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/150cbaa9850b79757f8ae9fe967a07b996fee5a5 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/be82e2e8419ff49980bef552a59365c5b8db5b50 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/07e5b452acf8d767735edbdcb39cefa9fedeb126 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d7c790bee5a478790d18c4b8b6383a9e7d7ebd59 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f70438a8d4edd462bbe77de5ce5a116c72864b9f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b8933c0cbd1efe942887321a3585a80ff99d5923 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c8773bf236dc9ff347365c284f40a09f44839183 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8ea278c370dabc9c96614e1c066d9e83e7c3ed27 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/080da78bd9c29b032909b146044001e02197b837 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/77d6716def26ba2717c0733ae6b0a8b5669af273 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4853ce0a3b2a02a41ff128ddad7afd571b6be6ae | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/43bc52343a1c314eb7ecadd7726cd03bea7aaa9f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/cbcdab2493d225e247a08c03b74ec237cf526f79 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4beb3584984b9d93b47ec376458fb18d8e4c6eab | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/ef2a94d3065f064df6232e3f5ca48d66378f1957 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9574e517d040dd1d574413a0aa940a7fc6b7146f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0d8ac9f2f37d668ed67f76c84ecf80a596e8c432 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9d3d864895a8a6f4f623ff5a7d10a48ffb6ae9f4 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/04d4c7ff7c32ea7b2b556a41ed658b123b545eac | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c03a658666752d3cb96f2c7aa7cf1c91c587035b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f724601c55d0be83669828099502c9f63944156b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f079952d89ac5ad7e5a4cd4283f4217f5c13fcfd | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/263a3fa63a6b86abceb1d4d0e74af51813e1f3e4 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/dfb05df16f580e67cc94baff7a055228f8f4bc0a | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/774ab1c33474820284b61280a6776648cc97372d | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/f084a5df6f3a04fdbb67615dbe2fe9a2d7f948e4 | ORPH microblazeel | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/4f03b881ef0589672b482442f37d6255a40069d2 | Classification of failures by reason for 2022.02.x -------------------------------------------------- bat-0.19.0 | 1 exempi-2.6.1 | 1 igd2-for-linux-2.1 | 1 mongodb-4.2.18 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/bf5af5b3756f78258183aea401eff9f8bb5dec27 | arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/99206d8634a049a44fecc48fc3fb84c8ea284204 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/abd602630a6c0c82da64f0d92a1476af7f414629 | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/4a26c9c37818d24c30f67cf8af42b6ea04e43cb8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- fontconfig-2.13.1 | 1 host-gcc-initial-12.1.0 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 libcap-ng-0.8.3 | 1 libglib2-2.72.3 | 1 libnss-3.81 | 1 linux-5.10.109-cip5-rt4 | 1 vlc-3.0.17.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/f363e709c411c068702113318ed9873e480972ed | ORPH armeb | host-gcc-initial-12.1.0 | NOK | http://autobuild.buildroot.net/results/27bf6c66fb28ed4f1d04008d3ac4a7a784894fda | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/64c4731a2f99b53c0327e847e383170f15c2adf4 | s390x | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/bf53633a5d11f4ec2d33886deac639edf9e1bd6b | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/6a55c18203e90c016eba1be8a6581fbe8ccdabc6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/23aad28d266ee4c8d86e6773aa41dc960ebf66c2 | sh4a | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/ec5c9e489f7919c0d5d27ca130a6e78257097b90 | mips | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/82661b426b63c64b27cab5cf2260b2b40356c59a | ORPH s390x | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/646d73d0806bd17ccf5a9fbec69558d746405f44 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 16 07:50:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 09:50:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: <20221016075056.GI2503@scaer> James, All, On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine > wrote: > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > >> The bearssl package is not compatible with parallel builds. > > bearssl was building perfectly fine up until now and it seems there > > are a lot of packages that are affected by parallel build issues > > (e.g. dmraid, musepack, slang, etc). > > Some parallel build bugs don't reproduce reliably due to timing, I made a change > to my autobuilders which massively increases the chance of triggering > build failures > in packages which have dependency graph bugs. This triggers build build failures > in -j1 builds which would otherwise only appear when running parallel builds(my > autobuilders are generally running with -j1 to make the logs more readable). > > > Did we change something recently on the autobuilders? > > Yes, all my autobuilders were recently changed to use make master(will be > make version 4.4 once released) with top level --shuffle=random. By disabling parallel build because you are using ana as yet unreleased version, we remove the parallel build for everyone, which is not very nice at all. Instead, we should really try and fix the packages rather than papering over the issue. Notes: - it *is* interesting to find those bugs; - it is sad that the default mode for --shuffle will be random, not none. Regards, Yann E. MORIN. > Details: > https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 > https://trofi.github.io/posts/238-new-make-shuffle-mode.html > http://trofi.github.io/posts/249-an-update-on-make-shuffle.html > > Note that MAKE1 is currently broken itself without this when using shuffle mode: > https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > > > >> > >> > >> Fixes: > >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > >> > >> Signed-off-by: James Hilliard > >> --- > >> package/bearssl/bearssl.mk | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > >> index ff5f4e87b7..c2a5760af5 100644 > >> --- a/package/bearssl/bearssl.mk > >> +++ b/package/bearssl/bearssl.mk > >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > >> endif > >> > >> define BEARSSL_BUILD_CMDS > >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > >> $(BEARSSL_TARGETS) > >> endef > >> > >> -- > >> 2.34.1 > >> > > Best Regards, > > > > Fabrice > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From clabbe at baylibre.com Sun Oct 16 08:06:29 2022 From: clabbe at baylibre.com (Corentin Labbe) Date: Sun, 16 Oct 2022 08:06:29 +0000 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme Message-ID: <20221016080629.3354482-1-clabbe@baylibre.com> Current ffmpeg package does not install ffplay. The root cause is that ffmpeg configure does not detect SDL2 due to version mismatch. The patch fixing that is taken from gentoo portage tree. Signed-off-by: Corentin Labbe --- ...peg-4.4.2-libsdl2-new-version-scheme.patch | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch diff --git a/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch b/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch new file mode 100644 index 0000000000..b592c2f9b7 --- /dev/null +++ b/package/ffmpeg/0005-ffmpeg-4.4.2-libsdl2-new-version-scheme.patch @@ -0,0 +1,25 @@ +https://git.ffmpeg.org/gitweb/ffmpeg.git/commitdiff/839f98ff6719cf2db0cbd88cd787a1b19b9cbf47 + +From: Christopher Degawa +Date: Wed, 11 May 2022 15:11:04 -0500 +Subject: [PATCH] configure: extend SDL check to accept all 2.x versions + +sdl2 recently changed their versioning, moving the patch level to minor level +https://github.com/libsdl-org/SDL/commit/cd7c2f1de7d9e418bb554047d714dd7cacc020ff +and have said that they will instead ship sdl3.pc for 3.0.0 + +Fixes ticket 9768 + +Signed-off-by: Christopher Degawa +Signed-off-by: Gyan Doshi +--- a/configure ++++ b/configure +@@ -6383,7 +6383,7 @@ fi + + if enabled sdl2; then + SDL2_CONFIG="${cross_prefix}sdl2-config" +- test_pkg_config sdl2 "sdl2 >= 2.0.1 sdl2 < 2.1.0" SDL_events.h SDL_PollEvent ++ test_pkg_config sdl2 "sdl2 >= 2.0.1 sdl2 < 3.0.0" SDL_events.h SDL_PollEvent + if disabled sdl2 && "${SDL2_CONFIG}" --version > /dev/null 2>&1; then + sdl2_cflags=$("${SDL2_CONFIG}" --cflags) + sdl2_extralibs=$("${SDL2_CONFIG}" --libs) -- 2.25.1 From troglobit at gmail.com Sun Oct 16 10:43:45 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Sun, 16 Oct 2022 12:43:45 +0200 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme In-Reply-To: <20221016080629.3354482-1-clabbe@baylibre.com> References: <20221016080629.3354482-1-clabbe@baylibre.com> Message-ID: <86ilkkcala.fsf@gmail.com> On Sun, Oct 16, 2022 at 08:06, Corentin Labbe wrote: > Current ffmpeg package does not install ffplay. The root cause is > that ffmpeg configure does not detect SDL2 due to version mismatch. > The patch fixing that is taken from gentoo portage tree. > > Signed-off-by: Corentin Labbe Reviewed-by: Joachim Wiberg From fperrad at gmail.com Sun Oct 16 11:33:41 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 16 Oct 2022 13:33:41 +0200 Subject: [Buildroot] [PATCH] package/lualogging: bump to version 1.7.0 Message-ID: <20221016113341.3759990-1-francois.perrad@gadz.org> diff COPYRIGHT: -Copyright (c) 2004-2021 Kepler Project. +Copyright (c) 2004-2022 Kepler Project. Signed-off-by: Francois Perrad --- package/lualogging/lualogging.hash | 4 ++-- package/lualogging/lualogging.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lualogging/lualogging.hash b/package/lualogging/lualogging.hash index 1fc8694e8..a9eadab4d 100644 --- a/package/lualogging/lualogging.hash +++ b/package/lualogging/lualogging.hash @@ -1,3 +1,3 @@ # computed by luarocks/buildroot -sha256 d29c9c78e4266d9390069b2a5f7afacfcf9189dea12ce3774a5aa4e3cdbcd89f lualogging-1.6.0-1.src.rock -sha256 4d95b123e667a13615f567a829aa39211dd55b0b48c9f247bf3fcc5c0b485da7 lualogging/COPYRIGHT +sha256 d4a8791e9b24840c4a4c0366399f55b6deb060fc3947f3a9aae9ced0334160c1 lualogging-1.7.0-1.src.rock +sha256 d900082cb26f8cf4a491ca51c00241f2c2e9cd9ae3531c62234017a360706adb lualogging/COPYRIGHT diff --git a/package/lualogging/lualogging.mk b/package/lualogging/lualogging.mk index 4d01f546e..78197f6be 100644 --- a/package/lualogging/lualogging.mk +++ b/package/lualogging/lualogging.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUALOGGING_VERSION = 1.6.0-1 +LUALOGGING_VERSION = 1.7.0-1 LUALOGGING_SUBDIR = lualogging LUALOGGING_LICENSE = MIT LUALOGGING_LICENSE_FILES = $(LUALOGGING_SUBDIR)/COPYRIGHT -- 2.34.1 From peter at korsgaard.com Sun Oct 16 14:58:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 In-Reply-To: <20221015223439.202348-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:34:39 +0200") References: <20221015223439.202348-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfnerxu.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles > - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE > - Fix overflow check in SAX2.c > https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:29 +0200 Subject: [Buildroot] [PATCH 01/12] package/gstreamer1: bump to version 1.20.4 In-Reply-To: <20221015230534.4016536-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:23 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> Message-ID: <87bkqberxm.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:32 +0200 Subject: [Buildroot] [PATCH 02/12] package/gst1-plugins-base: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-2-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:24 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-2-james.hilliard1@gmail.com> Message-ID: <877d0zerxj.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:43 +0200 Subject: [Buildroot] [PATCH 03/12] package/gst1-plugins-good: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-3-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:25 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-3-james.hilliard1@gmail.com> Message-ID: <8735bnerx8.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:46 +0200 Subject: [Buildroot] [PATCH 04/12] package/gst1-plugins-bad: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-4-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:26 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-4-james.hilliard1@gmail.com> Message-ID: <87y1tfddcp.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:50 +0200 Subject: [Buildroot] [PATCH 05/12] package/gst1-plugins-ugly: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-5-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:27 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-5-james.hilliard1@gmail.com> Message-ID: <87tu43ddcl.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:58:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:55 +0200 Subject: [Buildroot] [PATCH 06/12] package/gst1-devtools: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-6-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:28 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-6-james.hilliard1@gmail.com> Message-ID: <87pmerddcg.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:06 +0200 Subject: [Buildroot] [PATCH 07/12] package/gst1-libav: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-7-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:29 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-7-james.hilliard1@gmail.com> Message-ID: <87lepfddc5.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:11 +0200 Subject: [Buildroot] [PATCH 08/12] package/gst1-vaapi: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-8-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:30 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-8-james.hilliard1@gmail.com> Message-ID: <87h703ddc0.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:59:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:17 +0200 Subject: [Buildroot] [PATCH 09/12] package/gst1-rtsp-server: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-9-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:31 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-9-james.hilliard1@gmail.com> Message-ID: <87czarddbu.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:01 +0200 Subject: [Buildroot] [PATCH 10/12] package/gstreamer1-editing-services: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-10-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:32 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-10-james.hilliard1@gmail.com> Message-ID: <878rlfddam.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:11 +0200 Subject: [Buildroot] [PATCH 11/12] package/gst-omx: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-11-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:33 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-11-james.hilliard1@gmail.com> Message-ID: <874jw3ddac.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:16 +0200 Subject: [Buildroot] [PATCH 12/12] package/gst1-python: bump version to 1.20.4 In-Reply-To: <20221015230534.4016536-12-james.hilliard1@gmail.com> (James Hilliard's message of "Sat, 15 Oct 2022 17:05:34 -0600") References: <20221015230534.4016536-1-james.hilliard1@gmail.com> <20221015230534.4016536-12-james.hilliard1@gmail.com> Message-ID: <87zgdvbypr.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:00:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:52 +0200 Subject: [Buildroot] [PATCH v2] package/syslog-ng: Bump version to 3.38.1 In-Reply-To: <20221016022051.3870975-1-judge.packham@gmail.com> (Chris Packham's message of "Sun, 16 Oct 2022 15:20:51 +1300") References: <20221016022051.3870975-1-judge.packham@gmail.com> Message-ID: <87v8ojbyor.fsf@dell.be.48ers.dk> >>>>> "Chris" == Chris Packham writes: > Add new version. Remove patch that has been applied upstream. Update > hash for COPYING as it's text has changed to clarify some details but > the license remains LGP-2.0+L/GPL-2.0+. > Signed-off-by: Chris Packham > --- > Notes: > Changes in v2: > - update version in syslog-ng.conf Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:01:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:19 +0200 Subject: [Buildroot] [PATCH] package/lualogging: bump to version 1.7.0 In-Reply-To: <20221016113341.3759990-1-francois.perrad@gadz.org> (Francois Perrad's message of "Sun, 16 Oct 2022 13:33:41 +0200") References: <20221016113341.3759990-1-francois.perrad@gadz.org> Message-ID: <87r0z7byo0.fsf@dell.be.48ers.dk> >>>>> "Francois" == Francois Perrad writes: > diff COPYRIGHT: > -Copyright (c) 2004-2021 Kepler Project. > +Copyright (c) 2004-2022 Kepler Project. > Signed-off-by: Francois Perrad Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:02:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:10 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/lrzip: security bump to version 0.651 In-Reply-To: <20221015222605.171104-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:26:05 +0200") References: <20221015222605.171104-1-fontaine.fabrice@gmail.com> Message-ID: <87mt9vbyml.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple > concurrency use-after-free between the functions zpaq_decompress_buf() > and clear_rulist(). This vulnerability allows attackers to cause a > Denial of Service (DoS) via a crafted Irz file. > - Use official tarball and so drop autoreconf > https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Drop autoreconf Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:02:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:40 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdnet: needs host-pkgconf In-Reply-To: <20221015220913.151173-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:09:13 +0200") References: <20221015220913.151173-1-fontaine.fabrice@gmail.com> Message-ID: <87ilkjbylr.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > host-pkgconf is needed since bump to version 1.16.1 in commit > c8ed72c15d39cc6c676485bff8955ac5f4258138 and > https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: > checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' > ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' > Fixes: > - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 14:56:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:56:58 +0200 Subject: [Buildroot] [git commit] package/libxml2: security bump to version 2.10.3 Message-ID: <20221016150424.88C2C86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=df77618b12bfd442e5efd39abd013c3ba88481b8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From peter at korsgaard.com Sun Oct 16 14:57:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:41 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-good: bump version to 1.20.4 Message-ID: <20221016150424.AB31E86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b0696cb6786c20f732dc7bd6a443c8d3b9f50e1e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash | 4 ++-- package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash index 81da41388f..b30c512878 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.3.tar.xz.sha256sum -sha256 f8f3c206bf5cdabc00953920b47b3575af0ef15e9f871c0b6966f6d0aa5868b7 gst-plugins-good-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.20.4.tar.xz.sha256sum +sha256 b16130fbe632fa8547c2147a0ef575b0140fb521065c5cb121c72ddbd23b64da gst-plugins-good-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk index de7dcb985d..cc7bab5824 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_GOOD_VERSION = 1.20.3 +GST1_PLUGINS_GOOD_VERSION = 1.20.4 GST1_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST1_PLUGINS_GOOD_VERSION).tar.xz GST1_PLUGINS_GOOD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-good GST1_PLUGINS_GOOD_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 16 14:59:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:03 +0200 Subject: [Buildroot] [git commit] package/gst1-libav: bump version to 1.20.4 Message-ID: <20221016150424.D742D86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ad104d1c63c0be58610c090b3ce7cb5907b72ba4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-libav/gst1-libav.hash | 4 ++-- package/gstreamer1/gst1-libav/gst1-libav.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-libav/gst1-libav.hash b/package/gstreamer1/gst1-libav/gst1-libav.hash index 1b86e82b93..78f5b5bb07 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.hash +++ b/package/gstreamer1/gst1-libav/gst1-libav.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.3.tar.xz.sha256sum -sha256 3fedd10560fcdfaa1b6462cbf79a38c4e7b57d7f390359393fc0cef6dbf27dfe gst-libav-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.20.4.tar.xz.sha256sum +sha256 04ccbdd58fb31dd94098da599209834a0e7661638c5703381dd0a862c56fc532 gst-libav-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-libav/gst1-libav.mk b/package/gstreamer1/gst1-libav/gst1-libav.mk index 80545fdd4c..a867af5147 100644 --- a/package/gstreamer1/gst1-libav/gst1-libav.mk +++ b/package/gstreamer1/gst1-libav/gst1-libav.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_LIBAV_VERSION = 1.20.3 +GST1_LIBAV_VERSION = 1.20.4 GST1_LIBAV_SOURCE = gst-libav-$(GST1_LIBAV_VERSION).tar.xz GST1_LIBAV_SITE = https://gstreamer.freedesktop.org/src/gst-libav GST1_LIBAV_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:57:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:48 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-bad: bump version to 1.20.4 Message-ID: <20221016150424.B5D6586766@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8f6158c37f2d5dbe98932a98d4a0393a7bb730d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash | 4 ++-- package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash index 5a413cd350..c8789a707d 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.3.tar.xz.sha256sum -sha256 7a11c13b55dd1d2386dd902219e41cbfcdda8e1e0aa3e738186c95074b35da4f gst-plugins-bad-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.20.4.tar.xz.sha256sum +sha256 a1a3f53b3604d9a04fdd0bf9a1a616c3d2dab5320489e9ecee1178e81e33a16a gst-plugins-bad-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk index 57974d723a..14710a2501 100644 --- a/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk +++ b/package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BAD_VERSION = 1.20.3 +GST1_PLUGINS_BAD_VERSION = 1.20.4 GST1_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST1_PLUGINS_BAD_VERSION).tar.xz GST1_PLUGINS_BAD_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-bad GST1_PLUGINS_BAD_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 14:57:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:21 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-base: bump version to 1.20.4 Message-ID: <20221016150424.9F1E886755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c81289645f8cf2160bd029e1eec15229c6e13ebd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash | 4 ++-- package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash index 105708f1da..5c729d832f 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.3.tar.xz.sha256sum -sha256 7e30b3dd81a70380ff7554f998471d6996ff76bbe6fc5447096f851e24473c9f gst-plugins-base-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.20.4.tar.xz.sha256sum +sha256 8d181b7abe4caf23ee9f9ec5b4d3e232640452464e39495bfffb6d776fc97225 gst-plugins-base-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk index c244a0c621..d225cdf910 100644 --- a/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk +++ b/package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_BASE_VERSION = 1.20.3 +GST1_PLUGINS_BASE_VERSION = 1.20.4 GST1_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST1_PLUGINS_BASE_VERSION).tar.xz GST1_PLUGINS_BASE_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-base GST1_PLUGINS_BASE_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 14:57:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:55 +0200 Subject: [Buildroot] [git commit] package/gst1-plugins-ugly: bump version to 1.20.4 Message-ID: <20221016150424.C246286709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c29f2bff5254f3fc46044fcc5a45a99fc88b8e80 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash | 4 ++-- package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash index ffd060f465..4ec29e6894 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.3.tar.xz.sha256sum -sha256 8caa20789a09c304b49cf563d33cca9421b1875b84fcc187e4a385fa01d6aefd gst-plugins-ugly-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.20.4.tar.xz.sha256sum +sha256 5c9ec6bab96517e438b3f9bae0ceb84d3436f3da9bbe180cf4d28e32a7251b59 gst-plugins-ugly-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING diff --git a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk index 131163e20a..20382719c3 100644 --- a/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk +++ b/package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PLUGINS_UGLY_VERSION = 1.20.3 +GST1_PLUGINS_UGLY_VERSION = 1.20.4 GST1_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST1_PLUGINS_UGLY_VERSION).tar.xz GST1_PLUGINS_UGLY_SITE = https://gstreamer.freedesktop.org/src/gst-plugins-ugly GST1_PLUGINS_UGLY_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 16 14:59:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:30 +0200 Subject: [Buildroot] [git commit] package/gst1-rtsp-server: bump version to 1.20.4 Message-ID: <20221016150424.ED91E86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=076bf46d33ce8e5c55b88dea68bf4fc703c7791c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash | 4 ++-- package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash index 13dcb764d8..b6a31f8796 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.hash @@ -1,4 +1,4 @@ -# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.3.tar.xz.sha256sum -sha256 ee402718be9b127f0e5e66ca4c1b4f42e4926ec93ba307b7ccca5dc6cc9794ca gst-rtsp-server-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-rtsp-server/gst-rtsp-server-1.20.4.tar.xz.sha256sum +sha256 88d9ef634e59aeb8cc183ad5ae444557c5a88dd49d833b9072bc6e1fae6a3d7d gst-rtsp-server-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING.LIB diff --git a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk index 02cf9e5eb1..0b18c1fcf8 100644 --- a/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk +++ b/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_RTSP_SERVER_VERSION = 1.20.3 +GST1_RTSP_SERVER_VERSION = 1.20.4 GST1_RTSP_SERVER_SOURCE = gst-rtsp-server-$(GST1_RTSP_SERVER_VERSION).tar.xz GST1_RTSP_SERVER_SITE = http://gstreamer.freedesktop.org/src/gst-rtsp-server GST1_RTSP_SERVER_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:58:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:58:40 +0200 Subject: [Buildroot] [git commit] package/gst1-devtools: bump version to 1.20.4 Message-ID: <20221016150424.CC42D86751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bc5ab96f7c76d0c5c2a064c661616187d9a76af3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-devtools/gst1-devtools.hash | 4 ++-- package/gstreamer1/gst1-devtools/gst1-devtools.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.hash b/package/gstreamer1/gst1-devtools/gst1-devtools.hash index bed13db295..fc504a2c12 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.hash +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.3.tar.xz.sha256sum -sha256 bbbd45ead703367ea8f4be9b3c082d7b62bef47b240a39083f27844e28758c47 gst-devtools-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-devtools/gst-devtools-1.20.4.tar.xz.sha256sum +sha256 82a293600273f4dd3eed567aae510ca0c7d629c3807788b00e6cdbd1d2459a84 gst-devtools-1.20.4.tar.xz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 validate/COPYING diff --git a/package/gstreamer1/gst1-devtools/gst1-devtools.mk b/package/gstreamer1/gst1-devtools/gst1-devtools.mk index 14f665a408..fbb04c92ef 100644 --- a/package/gstreamer1/gst1-devtools/gst1-devtools.mk +++ b/package/gstreamer1/gst1-devtools/gst1-devtools.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_DEVTOOLS_VERSION = 1.20.3 +GST1_DEVTOOLS_VERSION = 1.20.4 GST1_DEVTOOLS_SOURCE = gst-devtools-$(GST1_DEVTOOLS_VERSION).tar.xz GST1_DEVTOOLS_SITE = https://gstreamer.freedesktop.org/src/gst-devtools GST1_DEVTOOLS_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 15:00:09 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:09 +0200 Subject: [Buildroot] [git commit] package/gst-omx: bump version to 1.20.4 Message-ID: <20221016150425.1144E86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8513099bc2315047629907f8457a94987e4df47a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst-omx/gst-omx.hash | 4 ++-- package/gstreamer1/gst-omx/gst-omx.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst-omx/gst-omx.hash b/package/gstreamer1/gst-omx/gst-omx.hash index 8abf4a27e8..140ad626f7 100644 --- a/package/gstreamer1/gst-omx/gst-omx.hash +++ b/package/gstreamer1/gst-omx/gst-omx.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.3.tar.xz.sha256sum -sha256 8db48040bb41f09edf8d17ff6d16c54888d7777ba4501c2c69f0083350ea9a15 gst-omx-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.20.4.tar.xz.sha256sum +sha256 70ddd485e2dcab79070164d61ad2ff3a63e15a1d7abf9075d86eb77762b0edfd gst-omx-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/gstreamer1/gst-omx/gst-omx.mk b/package/gstreamer1/gst-omx/gst-omx.mk index 085bff87ad..d644c44995 100644 --- a/package/gstreamer1/gst-omx/gst-omx.mk +++ b/package/gstreamer1/gst-omx/gst-omx.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST_OMX_VERSION = 1.20.3 +GST_OMX_VERSION = 1.20.4 GST_OMX_SOURCE = gst-omx-$(GST_OMX_VERSION).tar.xz GST_OMX_SITE = https://gstreamer.freedesktop.org/src/gst-omx From peter at korsgaard.com Sun Oct 16 14:59:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:57 +0200 Subject: [Buildroot] [git commit] package/gstreamer1-editing-services: bump version to 1.20.4 Message-ID: <20221016150425.0337E86751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=86a6d5ad118a2afc52809ea18e4864050de2127d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- .../gstreamer1-editing-services/gstreamer1-editing-services.hash | 4 ++-- .../gstreamer1-editing-services/gstreamer1-editing-services.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash index 18dd1a79b3..308596d7cd 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.hash @@ -1,5 +1,5 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.3.tar.xz.sha256sum -sha256 5fd896de69fbe24421eb6b0ff8d2f8b4c3cba3f3025ceacd302172f39a8abaa2 gst-editing-services-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-editing-services/gst-editing-services-1.20.4.tar.xz.sha256sum +sha256 aa03e983af5d79c1befffe3575b034e60960619a96bf877447cb73c28016fc41 gst-editing-services-1.20.4.tar.xz # Hashes for license files: sha256 f445dc78b88496f7e20c7a2a461b95baba5865c8919b8289ac24ac0a80c6ce7a COPYING diff --git a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk index 417aaf2a45..77feb15991 100644 --- a/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk +++ b/package/gstreamer1/gstreamer1-editing-services/gstreamer1-editing-services.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.3 +GSTREAMER1_EDITING_SERVICES_VERSION = 1.20.4 GSTREAMER1_EDITING_SERVICES_SOURCE = gst-editing-services-$(GSTREAMER1_EDITING_SERVICES_VERSION).tar.xz GSTREAMER1_EDITING_SERVICES_SITE = https://gstreamer.freedesktop.org/src/gstreamer-editing-services GSTREAMER1_EDITING_SERVICES_LICENSE = LGPL-2.0+ From peter at korsgaard.com Sun Oct 16 15:00:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:29 +0200 Subject: [Buildroot] [git commit] package/syslog-ng: Bump version to 3.38.1 Message-ID: <20221016150425.2691C86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=db63f65945527527f90b58113d9a56fbcd49c275 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add new version. Remove patch that has been applied upstream. Update hash for COPYING as it's text has changed to clarify some details but the license remains LGP-2.0+L/GPL-2.0+. Signed-off-by: Chris Packham Signed-off-by: Peter Korsgaard --- .../0002-lib-tlscontext.c-fix-libressl-build.patch | 85 ---------------------- package/syslog-ng/syslog-ng.conf | 2 +- package/syslog-ng/syslog-ng.hash | 4 +- package/syslog-ng/syslog-ng.mk | 2 +- 4 files changed, 4 insertions(+), 89 deletions(-) diff --git a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch b/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch deleted file mode 100644 index 2c438627a4..0000000000 --- a/package/syslog-ng/0002-lib-tlscontext.c-fix-libressl-build.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 6f93484cea81ff8d45df213d5d2b4cffc4eadcad Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 16 Jul 2022 18:09:25 +0200 -Subject: [PATCH] lib/tlscontext.c: fix libressl build - -Fix the following build failure with libressl raised since version -3.37.1 and -https://github.com/syslog-ng/syslog-ng/commit/c7ba645918480da06b9e065c62ebd630312b0c7f: - -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list' -/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list' - -Fixes: - - http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/syslog-ng/syslog-ng/pull/4081] ---- - cmake/openssl_functions.cmake | 4 +++- - configure.ac | 2 ++ - lib/tlscontext.c | 4 ++++ - syslog-ng-config.h.in | 2 ++ - 4 files changed, 11 insertions(+), 1 deletion(-) - -diff --git a/cmake/openssl_functions.cmake b/cmake/openssl_functions.cmake -index afd7b96bfe..319dcc2e23 100644 ---- a/cmake/openssl_functions.cmake -+++ b/cmake/openssl_functions.cmake -@@ -42,7 +42,9 @@ function (openssl_set_defines) - DH_set0_pqg - BN_get_rfc3526_prime_2048 - SSL_CTX_set_num_tickets -- SSL_CTX_set_ciphersuites) -+ SSL_CTX_set_ciphersuites -+ SSL_CTX_set1_sigalgs_list -+ SSL_CTX_set1_client_sigalgs_list) - - foreach (symbol ${symbol_list}) - string(TOUPPER ${symbol} SYMBOL_UPPERCASE) -diff --git a/configure.ac b/configure.ac -index 8cfab2251e..ecffb84f06 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1055,6 +1055,8 @@ AC_CHECK_DECLS([ASN1_STRING_get0_data], [], [], [[#include ]]) - AC_CHECK_DECLS([DH_set0_pqg], [], [], [[#include ]]) - AC_CHECK_DECLS([BN_get_rfc3526_prime_2048], [], [], [[#include ]]) - AC_CHECK_DECLS([SSL_CTX_set_num_tickets],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_sigalgs_list],[], [], [[#include ]]) -+AC_CHECK_DECLS([SSL_CTX_set1_client_sigalgs_list],[], [], [[#include ]]) - - CPPFLAGS="$CPPFLAGS_SAVE" - -diff --git a/lib/tlscontext.c b/lib/tlscontext.c -index ddde21dcaf..dedcf1ce5a 100644 ---- a/lib/tlscontext.c -+++ b/lib/tlscontext.c -@@ -598,11 +598,15 @@ tls_context_setup_cipher_suite(TLSContext *self) - static gboolean - tls_context_setup_sigalgs(TLSContext *self) - { -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST - if (self->sigalgs && !SSL_CTX_set1_sigalgs_list(self->ssl_ctx, self->sigalgs)) - return FALSE; -+#endif - -+#if SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - if (self->client_sigalgs && !SSL_CTX_set1_client_sigalgs_list(self->ssl_ctx, self->client_sigalgs)) - return FALSE; -+#endif - - return TRUE; - } -diff --git a/syslog-ng-config.h.in b/syslog-ng-config.h.in -index 1817deea50..004b0a7be6 100644 ---- a/syslog-ng-config.h.in -+++ b/syslog-ng-config.h.in -@@ -57,6 +57,8 @@ - #cmakedefine01 SYSLOG_NG_HAVE_DECL_ASN1_STRING_GET0_DATA - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_GET0_PARAM - #cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET_CIPHERSUITES -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_SIGALGS_LIST -+#cmakedefine01 SYSLOG_NG_HAVE_DECL_SSL_CTX_SET1_CLIENT_SIGALGS_LIST - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_STORE_CTX_GET0_CERT - #cmakedefine01 SYSLOG_NG_HAVE_DECL_X509_GET_EXTENSION_FLAGS - #cmakedefine01 SYSLOG_NG_HAVE_DECL_DH_SET0_PQG diff --git a/package/syslog-ng/syslog-ng.conf b/package/syslog-ng/syslog-ng.conf index 45b94facf9..69db9b4b78 100644 --- a/package/syslog-ng/syslog-ng.conf +++ b/package/syslog-ng/syslog-ng.conf @@ -1,4 +1,4 @@ - at version: 3.37 + at version: 3.38 source s_sys { file("/proc/kmsg" program_override("kernel")); diff --git a/package/syslog-ng/syslog-ng.hash b/package/syslog-ng/syslog-ng.hash index 764ff45733..6fce7be996 100644 --- a/package/syslog-ng/syslog-ng.hash +++ b/package/syslog-ng/syslog-ng.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 d67a320cb896cd5d62f24d9e1bec138847fa4618ae13a3946cae2b75c528ee14 syslog-ng-3.37.1.tar.gz -sha256 e912cf1e1c09b81d61c0154eb6c179588622c31ad07bfb4a90c612d07ff09d9b COPYING +sha256 5491f686d0b829b69b2e0fc0d66a62f51991aafaee005475bfa38fab399441f7 syslog-ng-3.38.1.tar.gz +sha256 c75dcbfc17ccf742f12042a370f825a40951085d2352dfc9d07e715dae3ca9bd COPYING sha256 ce3324c9f22299cfc7c281e5a6ab40fbe9c2ea1a67cee87226cb8cd39db1e1d2 GPL.txt sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LGPL.txt diff --git a/package/syslog-ng/syslog-ng.mk b/package/syslog-ng/syslog-ng.mk index 64b3b24498..a7176ad129 100644 --- a/package/syslog-ng/syslog-ng.mk +++ b/package/syslog-ng/syslog-ng.mk @@ -6,7 +6,7 @@ # When updating the version, please check at runtime if the version in # syslog-ng.conf header needs to be updated -SYSLOG_NG_VERSION = 3.37.1 +SYSLOG_NG_VERSION = 3.38.1 SYSLOG_NG_SITE = https://github.com/balabit/syslog-ng/releases/download/syslog-ng-$(SYSLOG_NG_VERSION) SYSLOG_NG_LICENSE = LGPL-2.1+ (syslog-ng core), GPL-2.0+ (modules) SYSLOG_NG_LICENSE_FILES = COPYING GPL.txt LGPL.txt From peter at korsgaard.com Sun Oct 16 14:59:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:59:24 +0200 Subject: [Buildroot] [git commit] package/gst1-vaapi: bump version to 1.20.4 Message-ID: <20221016150424.E3F6D86756@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=004129e259d44bd453d546a0acdc718ca71d8c1d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-vaapi/gst1-vaapi.hash | 4 ++-- package/gstreamer1/gst1-vaapi/gst1-vaapi.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash index fce687774a..5baaa4dfb7 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.3.tar.xz.sha256sum -sha256 6ee99eb316abdde9ad37002915bd8c3867918f6fdc74b7cf2ac4c1ae0d690b45 gstreamer-vaapi-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.20.4.tar.xz.sha256sum +sha256 ab12596144c05506e9782374c5d2cdfb3069fca89908d6de360d947bb77fd06a gstreamer-vaapi-1.20.4.tar.xz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LIB diff --git a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk index 8b137c37ec..bd6c16be3e 100644 --- a/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk +++ b/package/gstreamer1/gst1-vaapi/gst1-vaapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_VAAPI_VERSION = 1.20.3 +GST1_VAAPI_VERSION = 1.20.4 GST1_VAAPI_SITE = https://gstreamer.freedesktop.org/src/gstreamer-vaapi GST1_VAAPI_SOURCE = gstreamer-vaapi-$(GST1_VAAPI_VERSION).tar.xz GST1_VAAPI_LICENSE = LGPL-2.1+ From peter at korsgaard.com Sun Oct 16 14:57:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 16:57:05 +0200 Subject: [Buildroot] [git commit] package/gstreamer1: bump to version 1.20.4 Message-ID: <20221016150424.9410C82A70@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08a6aab0f0ecd12b96e6977c7ec4d4e9d84ac26e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gstreamer1/gstreamer1.hash | 4 ++-- package/gstreamer1/gstreamer1/gstreamer1.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gstreamer1/gstreamer1.hash b/package/gstreamer1/gstreamer1/gstreamer1.hash index 5daadfae74..5fb52606fe 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.hash +++ b/package/gstreamer1/gstreamer1/gstreamer1.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.3.tar.xz.sha256sum -sha256 607daf64bbbd5fb18af9d17e21c0d22c4d702fffe83b23cb22d1b1af2ca23a2a gstreamer-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.20.4.tar.xz.sha256sum +sha256 67c1edf8c3c339cda5dde85f4f7b953bb9607c2d13ae970e2491c5c4c055ef5f gstreamer-1.20.4.tar.xz sha256 ad2eec519ebd4b5df86ea84dff24ae3bfa2edea846a703b58902dd221ae375db COPYING diff --git a/package/gstreamer1/gstreamer1/gstreamer1.mk b/package/gstreamer1/gstreamer1/gstreamer1.mk index 89d5f93d43..16c016b145 100644 --- a/package/gstreamer1/gstreamer1/gstreamer1.mk +++ b/package/gstreamer1/gstreamer1/gstreamer1.mk @@ -4,7 +4,7 @@ # ################################################################################ -GSTREAMER1_VERSION = 1.20.3 +GSTREAMER1_VERSION = 1.20.4 GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz GSTREAMER1_SITE = https://gstreamer.freedesktop.org/src/gstreamer GSTREAMER1_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 15:02:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:02:36 +0200 Subject: [Buildroot] [git commit] package/libdnet: needs host-pkgconf Message-ID: <20221016150425.465FF86709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e7c5529e9c080e4f860ef3276aa9ed9e01b3fa42 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master host-pkgconf is needed since bump to version 1.16.1 in commit c8ed72c15d39cc6c676485bff8955ac5f4258138 and https://github.com/ofalk/libdnet/commit/3a651c615e1201b5fe9413f8dc5b1671d5e5049a: checking for Check... ./configure: line 14123: syntax error near unexpected token `CHECK,' ./configure: line 14123: ` PKG_CHECK_MODULES(CHECK, check)' Fixes: - http://autobuild.buildroot.org/results/e1ff5ca46e83db2c722f782387dbb7402b8d459e Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdnet/libdnet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libdnet/libdnet.mk b/package/libdnet/libdnet.mk index 1e75dae323..dc56b892b4 100644 --- a/package/libdnet/libdnet.mk +++ b/package/libdnet/libdnet.mk @@ -14,6 +14,7 @@ LIBDNET_CONF_OPTS = \ --with-gnu-ld \ --with-check=no LIBDNET_CONFIG_SCRIPTS = dnet-config +LIBDNET_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_LIBDNET_PYTHON),y) LIBDNET_DEPENDENCIES += host-python-cython python3 From peter at korsgaard.com Sun Oct 16 15:01:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:11 +0200 Subject: [Buildroot] [git commit] package/lualogging: bump to version 1.7.0 Message-ID: <20221016150425.31E1686751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51812c339078e5db20ef8dec06b24c36a0d22208 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master diff COPYRIGHT: -Copyright (c) 2004-2021 Kepler Project. +Copyright (c) 2004-2022 Kepler Project. Signed-off-by: Francois Perrad Signed-off-by: Peter Korsgaard --- package/lualogging/lualogging.hash | 4 ++-- package/lualogging/lualogging.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lualogging/lualogging.hash b/package/lualogging/lualogging.hash index 1fc8694e84..a9eadab4d1 100644 --- a/package/lualogging/lualogging.hash +++ b/package/lualogging/lualogging.hash @@ -1,3 +1,3 @@ # computed by luarocks/buildroot -sha256 d29c9c78e4266d9390069b2a5f7afacfcf9189dea12ce3774a5aa4e3cdbcd89f lualogging-1.6.0-1.src.rock -sha256 4d95b123e667a13615f567a829aa39211dd55b0b48c9f247bf3fcc5c0b485da7 lualogging/COPYRIGHT +sha256 d4a8791e9b24840c4a4c0366399f55b6deb060fc3947f3a9aae9ced0334160c1 lualogging-1.7.0-1.src.rock +sha256 d900082cb26f8cf4a491ca51c00241f2c2e9cd9ae3531c62234017a360706adb lualogging/COPYRIGHT diff --git a/package/lualogging/lualogging.mk b/package/lualogging/lualogging.mk index 4d01f546e9..78197f6be6 100644 --- a/package/lualogging/lualogging.mk +++ b/package/lualogging/lualogging.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUALOGGING_VERSION = 1.6.0-1 +LUALOGGING_VERSION = 1.7.0-1 LUALOGGING_SUBDIR = lualogging LUALOGGING_LICENSE = MIT LUALOGGING_LICENSE_FILES = $(LUALOGGING_SUBDIR)/COPYRIGHT From peter at korsgaard.com Sun Oct 16 15:01:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:01:53 +0200 Subject: [Buildroot] [git commit] package/lrzip: security bump to version 0.651 Message-ID: <20221016150425.3C9FD86755@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=edbdad93979ce8521653b4031235fd0fa9d438c9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple concurrency use-after-free between the functions zpaq_decompress_buf() and clear_rulist(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted Irz file. - Use official tarball and so drop autoreconf https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/lrzip/lrzip.hash | 2 +- package/lrzip/lrzip.mk | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lrzip/lrzip.hash b/package/lrzip/lrzip.hash index 19295383c3..cb03ff07cc 100644 --- a/package/lrzip/lrzip.hash +++ b/package/lrzip/lrzip.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 9b6b4bb1ae76dafbaab96ec9d50d41af5fed45a6c4f2e06feea828c2cd8025c0 lrzip-0.641.tar.gz +sha256 48bd8decb097c1596c9b3777959cd3e332819434ed77a2823e65aa436f1602f9 lrzip-0.651.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lrzip/lrzip.mk b/package/lrzip/lrzip.mk index 27d9fde204..0375696414 100644 --- a/package/lrzip/lrzip.mk +++ b/package/lrzip/lrzip.mk @@ -4,9 +4,9 @@ # ################################################################################ -LRZIP_VERSION = 0.641 -LRZIP_SITE = $(call github,ckolivas,lrzip,v$(LRZIP_VERSION)) -LRZIP_AUTORECONF = YES +LRZIP_VERSION = 0.651 +LRZIP_SOURCE = lrzip-$(LRZIP_VERSION).tar.xz +LRZIP_SITE = http://ck.kolivas.org/apps/lrzip LRZIP_LICENSE = GPL-2.0+ LRZIP_LICENSE_FILES = COPYING LRZIP_CPE_ID_VENDOR = long_range_zip_project From peter at korsgaard.com Sun Oct 16 15:00:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:00:23 +0200 Subject: [Buildroot] [git commit] package/gst1-python: bump version to 1.20.4 Message-ID: <20221016150425.1C6A986709@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b7bd4cabed37d3ea827e7b8aabe0fa50a8effd4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/gstreamer1/gst1-python/gst1-python.hash | 4 ++-- package/gstreamer1/gst1-python/gst1-python.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gstreamer1/gst1-python/gst1-python.hash b/package/gstreamer1/gst1-python/gst1-python.hash index 9501d94a97..adb116ac4c 100644 --- a/package/gstreamer1/gst1-python/gst1-python.hash +++ b/package/gstreamer1/gst1-python/gst1-python.hash @@ -1,3 +1,3 @@ -# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.3.tar.xz.sha256sum -sha256 db348120eae955b8cc4de3560a7ea06e36d6e1ddbaa99a7ad96b59846601cfdc gst-python-1.20.3.tar.xz +# From https://gstreamer.freedesktop.org/src/gst-python/gst-python-1.20.4.tar.xz.sha256sum +sha256 5eb4136d03e2a495f4499c8b2e6d9d3e7b5e73c5a8b8acf9213d57bc6a7bd3c1 gst-python-1.20.4.tar.xz sha256 ea3ad127610e5ded2210b3a86a46314f2b3b28e438eccffdae19a4d6fbcdb0c2 COPYING diff --git a/package/gstreamer1/gst1-python/gst1-python.mk b/package/gstreamer1/gst1-python/gst1-python.mk index 0fa1f661b8..feb2de718a 100644 --- a/package/gstreamer1/gst1-python/gst1-python.mk +++ b/package/gstreamer1/gst1-python/gst1-python.mk @@ -4,7 +4,7 @@ # ################################################################################ -GST1_PYTHON_VERSION = 1.20.3 +GST1_PYTHON_VERSION = 1.20.4 GST1_PYTHON_SOURCE = gst-python-$(GST1_PYTHON_VERSION).tar.xz GST1_PYTHON_SITE = https://gstreamer.freedesktop.org/src/gst-python GST1_PYTHON_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 16 15:06:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:06:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/agent-proxy: fix AGENT_PROXY_VERSION In-Reply-To: <20221014220417.7167-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:04:17 +0200") References: <20221014220417.7167-1-fontaine.fabrice@gmail.com> Message-ID: <87edv7byex.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Make AGENT_PROXY_VERSION compliant with release-monitoring.org > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 16 15:05:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 16 Oct 2022 17:05:21 +0200 Subject: [Buildroot] [git commit] package/agent-proxy: fix AGENT_PROXY_VERSION Message-ID: <20221016150659.68BA686785@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e451f1a578d1629ac1e6cf1e61bc8fcead0910d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Make AGENT_PROXY_VERSION compliant with release-monitoring.org Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/agent-proxy/agent-proxy.hash | 2 +- package/agent-proxy/agent-proxy.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/agent-proxy/agent-proxy.hash b/package/agent-proxy/agent-proxy.hash index bd0e814d20..685dd4fbaf 100644 --- a/package/agent-proxy/agent-proxy.hash +++ b/package/agent-proxy/agent-proxy.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c4db014339b5bbdae3d98e814844e1b80d87b663a343f7d33fdb89fdbb02f16d agent-proxy-agent-proxy-1.97-br1.tar.gz +sha256 b1667b36074c10ebd6dd1f89eda75d5877bc8e06ecf2919f18e75a7a5a9de19b agent-proxy-1.97.tar.gz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/agent-proxy/agent-proxy.mk b/package/agent-proxy/agent-proxy.mk index 46108aef02..c8844ccbf1 100644 --- a/package/agent-proxy/agent-proxy.mk +++ b/package/agent-proxy/agent-proxy.mk @@ -4,8 +4,8 @@ # ################################################################################ -AGENT_PROXY_VERSION = agent-proxy-1.97 -AGENT_PROXY_SITE = git://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git +AGENT_PROXY_VERSION = 1.97 +AGENT_PROXY_SITE = https://git.kernel.org/pub/scm/utils/kernel/kgdb/agent-proxy.git/snapshot AGENT_PROXY_LICENSE = GPL-2.0 AGENT_PROXY_LICENSE_FILES = COPYING From bernd.kuhls at t-online.de Sun Oct 16 15:20:34 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:20:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/ffmpeg: bump version to 4.4.3 Message-ID: <20221016152034.1161161-1-bernd.kuhls@t-online.de> Changelog: http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 Signed-off-by: Bernd Kuhls --- package/ffmpeg/ffmpeg.hash | 2 +- package/ffmpeg/ffmpeg.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ffmpeg/ffmpeg.hash b/package/ffmpeg/ffmpeg.hash index 8669a060d0..c9d7ea7c41 100644 --- a/package/ffmpeg/ffmpeg.hash +++ b/package/ffmpeg/ffmpeg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 af419a7f88adbc56c758ab19b4c708afbcae15ef09606b82b855291f6a6faa93 ffmpeg-4.4.2.tar.xz +sha256 6c5b6c195e61534766a0b5fe16acc919170c883362612816d0a1c7f4f947006e ffmpeg-4.4.3.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPLv2 sha256 b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe COPYING.LGPLv2.1 sha256 cb48bf09a11f5fb576cddb0431c8f5ed0a60157a9ec942adffc13907cbe083f2 LICENSE.md diff --git a/package/ffmpeg/ffmpeg.mk b/package/ffmpeg/ffmpeg.mk index ced5ce598f..136e3e24ca 100644 --- a/package/ffmpeg/ffmpeg.mk +++ b/package/ffmpeg/ffmpeg.mk @@ -4,7 +4,7 @@ # ################################################################################ -FFMPEG_VERSION = 4.4.2 +FFMPEG_VERSION = 4.4.3 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.xz FFMPEG_SITE = http://ffmpeg.org/releases FFMPEG_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:21:52 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:21:52 +0200 Subject: [Buildroot] [PATCH] package/ffmpeg: handle new SDL2 version scheme References: <20221016080629.3354482-1-clabbe__38958.9544081659$1665907620$gmane$org@baylibre.com> Message-ID: Am Sun, 16 Oct 2022 08:06:29 +0000 schrieb Corentin Labbe: > Current ffmpeg package does not install ffplay. > The root cause is that ffmpeg configure does not detect SDL2 due to > version mismatch. > The patch fixing that is taken from gentoo portage tree. Hi, this patch is also included in the new version: http://patchwork.ozlabs.org/project/buildroot/patch/ 20221016152034.1161161-1-bernd.kuhls at t-online.de/ Regards, Bernd From bernd.kuhls at t-online.de Sun Oct 16 15:29:38 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:29:38 +0200 Subject: [Buildroot] [PATCH 1/2] package/sofia-sip: bump version to 1.13.9 Message-ID: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/sofia-sip/sofia-sip.hash | 2 +- package/sofia-sip/sofia-sip.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sofia-sip/sofia-sip.hash b/package/sofia-sip/sofia-sip.hash index ae2b3e725c..776136bb15 100644 --- a/package/sofia-sip/sofia-sip.hash +++ b/package/sofia-sip/sofia-sip.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 ebd006a98a7dff6e7f4d8357c5ebeee1d3bee3ac29ff213a4909e845f230fcbe sofia-sip-1.13.8-756ab9b5c9.tar.gz +sha256 daf75c41408c559c2d58a8fd4d39be4a8ff5144bc1db220d4dbc28deeed6670a sofia-sip-1.13.9-f6ee306084.tar.gz sha256 e1c0890440efe31b6cd2ee2abf895eb917c787799f079133f5809414d90d5d60 COPYING sha256 b402ae58cf355b33be8fa023f704a039e3d41ecaccd2bbcda43ca31d703e4556 COPYRIGHTS diff --git a/package/sofia-sip/sofia-sip.mk b/package/sofia-sip/sofia-sip.mk index 80e59057c4..9071d964e4 100644 --- a/package/sofia-sip/sofia-sip.mk +++ b/package/sofia-sip/sofia-sip.mk @@ -4,8 +4,8 @@ # ################################################################################ -SOFIA_SIP_VERSION = 1.13.8 -SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-756ab9b5c9.tar.gz +SOFIA_SIP_VERSION = 1.13.9 +SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-f6ee306084.tar.gz SOFIA_SIP_SITE = https://files.freeswitch.org/downloads/libs/sofia-sip SOFIA_SIP_INSTALL_STAGING = YES SOFIA_SIP_DEPENDENCIES = host-pkgconf -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:29:39 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:29:39 +0200 Subject: [Buildroot] [PATCH 2/2] package/freeswitch: bump version to 1.10.8 In-Reply-To: <20221016152939.1162118-1-bernd.kuhls@t-online.de> References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Message-ID: <20221016152939.1162118-2-bernd.kuhls@t-online.de> Release notes: https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 Removed two patches which are included in upstream release, renumbered remaining patch. Removed libs/apr-util/LICENSE due to upstream removal of bundled apr-util package. Added fix to disable pcap detection, otherwise /usr/bin/pcap-config can be picked-up which breaks building freeswitch. Signed-off-by: Bernd Kuhls --- ...build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch | 26 ---- ...hash-hmac_ossl.c-fix-build-with-lib.patch} | 0 .../0002-core-fix--disable-libyuv.patch | 129 ------------------ package/freeswitch/freeswitch.hash | 5 +- package/freeswitch/freeswitch.mk | 9 +- 5 files changed, 8 insertions(+), 161 deletions(-) delete mode 100644 package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch rename package/freeswitch/{0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch => 0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch} (100%) delete mode 100644 package/freeswitch/0002-core-fix--disable-libyuv.patch diff --git a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch b/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch deleted file mode 100644 index 57f6e660c1..0000000000 --- a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 68039d344d8e826e8b403c9cd0284fd07b4495ac Mon Sep 17 00:00:00 2001 -From: Dragos Oancea -Date: Tue, 26 Oct 2021 08:42:58 +0000 -Subject: [PATCH] [core] fix build SWITCH_BYTE_ORDER == __BIG_ENDIAN - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/68039d344d8e826e8b403c9cd0284fd07b4495ac - -Signed-off-by: Bernd Kuhls ---- - src/switch_rtp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/switch_rtp.c b/src/switch_rtp.c -index 1880bbb19c..843ee81381 100644 ---- a/src/switch_rtp.c -+++ b/src/switch_rtp.c -@@ -2155,7 +2155,7 @@ static void switch_send_rtcp_event(switch_rtp_t *rtp_session ,struct switch_rtcp - switch_event_add_header_string(event, SWITCH_STACK_BOTTOM, header, value); - snprintf(header, sizeof(header), "Source-Lost"); - #if SWITCH_BYTE_ORDER == __BIG_ENDIAN -- tmpLost = report->lost; /* signed 24bit will extended signess to int32_t automatically */ -+ tmpLost = rtcp_report_block->lost; /* signed 24bit will extended signess to int32_t automatically */ - #else - tmpLost = ntohl(rtcp_report_block->lost)>>8; - tmpLost = tmpLost | ((tmpLost & 0x00800000) ? 0xff000000 : 0x00000000); /* ...and signess compensation */ diff --git a/package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch b/package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch similarity index 100% rename from package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch rename to package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch diff --git a/package/freeswitch/0002-core-fix--disable-libyuv.patch b/package/freeswitch/0002-core-fix--disable-libyuv.patch deleted file mode 100644 index 137cb27cf8..0000000000 --- a/package/freeswitch/0002-core-fix--disable-libyuv.patch +++ /dev/null @@ -1,129 +0,0 @@ -From a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 Mon Sep 17 00:00:00 2001 -From: Sebastian Kemper -Date: Mon, 1 Nov 2021 09:59:09 +0100 -Subject: [PATCH] [core] fix "--disable-libyuv" - -Recent changes made it impossible to compile freeswitch without libyuv -support. - -src/switch_core_video.c: In function 'switch_img_read_from_file': -src/switch_core_video.c:3139:4: error: implicit declaration of function 'RAWToI420' [-Werror=implicit-function-declaration] -RAWToI420(data, width * 3, -^ -src/switch_core_video.c:3148:4: error: implicit declaration of function 'ABGRToARGB' [-Werror=implicit-function-declaration] -ABGRToARGB(data, width * 4, img->planes[SWITCH_PLANE_PACKED], img->stride[SWITCH_PLANE_PACKED], width, height); -^ - -Fix this my adding/moving the checks for "SWITCH_HAVE_YUV". - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 - -Signed-off-by: Bernd Kuhls -Signed-off-by: Sebastian Kemper ---- - src/switch_core_video.c | 12 ++++++++++++ - tests/unit/switch_core_video.c | 4 ++++ - 2 files changed, 16 insertions(+) - -diff --git a/src/switch_core_video.c b/src/switch_core_video.c -index 7dbd685d6ee..0d377f9c3e4 100644 ---- a/src/switch_core_video.c -+++ b/src/switch_core_video.c -@@ -3116,6 +3116,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url_png(switch_image_t *img, cha - - SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name, switch_img_fmt_t img_fmt) - { -+#ifdef SWITCH_HAVE_YUV - int width = 0, height = 0, channels = 0; - int comp = STBI_rgb; - unsigned char *data = NULL; -@@ -3155,12 +3156,16 @@ SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name - } else if (data) { - stbi_image_free(data); - } -+#endif - - return NULL; - } - - SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, const char* file_name, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - const char *ext = strrchr(file_name, '.'); -@@ -3217,6 +3222,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, co - free(data); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif - } - - typedef struct data_url_context_s { -@@ -3224,14 +3230,19 @@ typedef struct data_url_context_s { - char **urlP; - } data_url_context_t; - -+#ifdef SWITCH_HAVE_YUV - static void data_url_write_func(void *context, void *data, int size) - { - switch_buffer_t *buffer = (switch_buffer_t *)context; - switch_buffer_write(buffer, data, size); - } -+#endif - - SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char **urlP, const char *type, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - int stride_in_bytes = 0; -@@ -3300,6 +3311,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char ** - switch_buffer_destroy(&buffer); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif /* SWITCH_HAVE_YUV */ - } - - -diff --git a/tests/unit/switch_core_video.c b/tests/unit/switch_core_video.c -index 27c96102929..e395db474d5 100644 ---- a/tests/unit/switch_core_video.c -+++ b/tests/unit/switch_core_video.c -@@ -48,6 +48,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEARDOWN_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(data_url_test) - { - char *data_url = NULL; -@@ -88,6 +89,7 @@ FST_CORE_BEGIN("./conf") - unlink(argb_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - - FST_TEST_BEGIN(img_patch) - { -@@ -239,6 +241,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEST_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(stb_data_url) - { - switch_image_t *img = switch_img_alloc(NULL, SWITCH_IMG_FMT_I420, 120, 60, 1); -@@ -321,6 +324,7 @@ FST_CORE_BEGIN("./conf") - unlink(jpg_write_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - } - FST_SUITE_END() - } diff --git a/package/freeswitch/freeswitch.hash b/package/freeswitch/freeswitch.hash index 8066c620c4..18a36ff23c 100644 --- a/package/freeswitch/freeswitch.hash +++ b/package/freeswitch/freeswitch.hash @@ -1,10 +1,9 @@ -# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.7.-release.tar.xz.sha256 -sha256 0919bddc2ea9cab2e4944314e71637bea9dd4f40d510722a74ea032104594c41 freeswitch-1.10.7.-release.tar.xz +# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.8.-release.tar.xz.sha256 +sha256 1176b26b2f463de2980e5be953f81ced94d23c784452bd41e086d3933a88be5f freeswitch-1.10.8.-release.tar.xz # Locally computed sha256 75c933202f40939cdc3827fce20a1efdaa38291e2b5a65d234eb16e2cffda66a COPYING sha256 c3e3388768dae8bf4edcc4108f95be815b8a05c0b0aef6e4c3d8df81affdfa34 docs/OPENH264_BINARY_LICENSE.txt sha256 e8e26b16da14aa3e6ed5c22c705fdc1f45d6225fca461ea9f7314bcdfdc414c4 libs/apr/LICENSE -sha256 1eefb2ea1db0af7729a9d8a27d7c65d8a37ab185393f935b029aac6828ce315a libs/apr-util/LICENSE sha256 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615 libs/libvpx/LICENSE sha256 2b2cc1180c7e6988328ad2033b04b80117419db9c4c584918bbb3cfec7e9364f libs/libyuv/LICENSE sha256 7d72a8aee2c4b1a084200487992a5d86f5df6b535727a14c1874918e99d24600 libs/libzrtp/src/zrtp_legal.c diff --git a/package/freeswitch/freeswitch.mk b/package/freeswitch/freeswitch.mk index 24c1ee4dd4..6234dd8e97 100644 --- a/package/freeswitch/freeswitch.mk +++ b/package/freeswitch/freeswitch.mk @@ -4,20 +4,19 @@ # ################################################################################ -FREESWITCH_VERSION = 1.10.7 +FREESWITCH_VERSION = 1.10.8 FREESWITCH_SOURCE = freeswitch-$(FREESWITCH_VERSION).-release.tar.xz FREESWITCH_SITE = https://files.freeswitch.org/freeswitch-releases # External modules need headers/libs from staging FREESWITCH_INSTALL_STAGING = YES FREESWITCH_LICENSE = MPL-1.1, \ GPL-3.0+ with font exception (fonts), \ - Apache-2.0 (apr, apr-util), \ + Apache-2.0 (apr), \ BSD-3-Clause (libsrtp) FREESWITCH_LICENSE_FILES = \ COPYING \ libs/apr/LICENSE \ - libs/apr-util/LICENSE \ libs/srtp/LICENSE FREESWITCH_CPE_ID_VENDOR = freeswitch @@ -50,6 +49,10 @@ FREESWITCH_CONF_ENV += \ ac_cv_prog_PHP_CONFIG=false \ ac_cv_have_php_config=no +# disable pcap detection, pcap is an optional dependency for unit tests +FREESWITCH_CONF_ENV += \ + ac_cv_prog_HAVE_PCAP_CONFIG=false + # copied from freeswitch/configure.ac, line 258+ FREESWITCH_CONF_ENV += \ ac_cv_file__dev_ptmx=yes \ -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:30:50 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:30:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix Message-ID: <20221016153050.1163862-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash | 2 +- package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash index a24a7abcd8..c1d3b476b9 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3126ce811e03ac92363a4e399b908336bb54328b7fa0d42c25ac85b2fe5aa7d4 kodi-pvr-zattoo-19.7.15-Matrix.tar.gz +sha256 ac09db721e51b47f1ca7f4c2201833dbcd69040fd19b09c194fa7491ff4dad41 kodi-pvr-zattoo-19.7.16-Matrix.tar.gz sha256 310782e1abd43c4de6217c513e328bddf999d39302d67c6e05b10a59959827af LICENSE.md diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk index 559dbf884b..49b33916ee 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk @@ -4,7 +4,7 @@ # ################################################################################ -KODI_PVR_ZATTOO_VERSION = 19.7.15-Matrix +KODI_PVR_ZATTOO_VERSION = 19.7.16-Matrix KODI_PVR_ZATTOO_SITE = $(call github,rbuehlma,pvr.zattoo,$(KODI_PVR_ZATTOO_VERSION)) KODI_PVR_ZATTOO_LICENSE = GPL-2.0+ KODI_PVR_ZATTOO_LICENSE_FILES = LICENSE.md -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:41:47 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:41:47 +0200 Subject: [Buildroot] [PATCH 1/2] package/libva: bump version to 2.16.0 Message-ID: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d Signed-off-by: Bernd Kuhls --- package/libva/libva.hash | 6 +++--- package/libva/libva.mk | 3 +-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/package/libva/libva.hash b/package/libva/libva.hash index ecca9271cc..2916898c31 100644 --- a/package/libva/libva.hash +++ b/package/libva/libva.hash @@ -1,5 +1,5 @@ -# From https://github.com/intel/libva/releases/download/2.15.0/libva-2.15.0.tar.bz2.sha1sum -sha1 b4fca8600961336b246e80552f9b0278c187051b libva-2.15.0.tar.bz2 +# From https://github.com/intel/libva/releases/download/2.16.0/libva-2.16.0.tar.bz2.sha1sum +sha1 ba1c0e196d69a26e54b065dc0f645bdf3be147a7 libva-2.16.0.tar.bz2 # Locally computed -sha256 258ed409458d3e7a000e1908bc852619615ee6a933359c745fcd93eb3e461eca libva-2.15.0.tar.bz2 +sha256 115faca0db2c417a37da49830870e260450fa13066f5e24e252a20c36d920a1c libva-2.16.0.tar.bz2 sha256 c86a782ee845b52472dae9b9d79fb915d333628ac0efe49cdce63644814931de COPYING diff --git a/package/libva/libva.mk b/package/libva/libva.mk index 4138daf8b4..3b6e9580d3 100644 --- a/package/libva/libva.mk +++ b/package/libva/libva.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_VERSION = 2.15.0 +LIBVA_VERSION = 2.16.0 LIBVA_SOURCE = libva-$(LIBVA_VERSION).tar.bz2 LIBVA_SITE = https://github.com/intel/libva/releases/download/$(LIBVA_VERSION) LIBVA_LICENSE = MIT @@ -30,7 +30,6 @@ endif ifeq ($(BR2_PACKAGE_WAYLAND),y) LIBVA_DEPENDENCIES += wayland -LIBVA_CONF_ENV += ac_cv_path_WAYLAND_SCANNER=$(HOST_DIR)/bin/wayland-scanner LIBVA_CONF_OPTS += --enable-wayland else LIBVA_CONF_OPTS += --disable-wayland -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:41:48 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:41:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/libva-utils: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-1-bernd.kuhls@t-online.de> References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Message-ID: <20221016154148.1254457-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/libva-utils/libva-utils.hash | 2 +- package/libva-utils/libva-utils.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libva-utils/libva-utils.hash b/package/libva-utils/libva-utils.hash index 3ff6a488fb..95bcee782b 100644 --- a/package/libva-utils/libva-utils.hash +++ b/package/libva-utils/libva-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 73609a24fe1dbf99e1472e20af1398d910f64c88b8615272f9f3539ffc5d2efc libva-utils-2.15.0.tar.gz +sha256 646c9bfff6a83504c48de2c786c9514ca30c5e916127faf00f143ef8147ee950 libva-utils-2.16.0.tar.gz sha256 c6220c9f87832c27abcb8a32eafdd2823e13ce146b3ea63d5deae2a76798ef50 COPYING diff --git a/package/libva-utils/libva-utils.mk b/package/libva-utils/libva-utils.mk index 0d6a3c062e..5feaa36995 100644 --- a/package/libva-utils/libva-utils.mk +++ b/package/libva-utils/libva-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_UTILS_VERSION = 2.15.0 +LIBVA_UTILS_VERSION = 2.16.0 LIBVA_UTILS_SITE = $(call github,intel,libva-utils,$(LIBVA_UTILS_VERSION)) LIBVA_UTILS_LICENSE = MIT LIBVA_UTILS_LICENSE_FILES = COPYING -- 2.30.2 From james.hilliard1 at gmail.com Sun Oct 16 15:44:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 11:44:19 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221016075056.GI2503@scaer> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > James, All, > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > > On Sat, Oct 15, 2022 at 6:14 PM Fabrice Fontaine > > wrote: > > > Le sam. 15 oct. 2022 ? 02:58, James Hilliard a ?crit : > > >> The bearssl package is not compatible with parallel builds. > > > bearssl was building perfectly fine up until now and it seems there > > > are a lot of packages that are affected by parallel build issues > > > (e.g. dmraid, musepack, slang, etc). > > > > Some parallel build bugs don't reproduce reliably due to timing, I made a change > > to my autobuilders which massively increases the chance of triggering > > build failures > > in packages which have dependency graph bugs. This triggers build build failures > > in -j1 builds which would otherwise only appear when running parallel builds(my > > autobuilders are generally running with -j1 to make the logs more readable). > > > > > Did we change something recently on the autobuilders? > > > > Yes, all my autobuilders were recently changed to use make master(will be > > make version 4.4 once released) with top level --shuffle=random. > > By disabling parallel build because you are using ana as yet unreleased > version, we remove the parallel build for everyone, which is not very > nice at all. Failures with shuffle mode indicate that the package is not parallel compatible on existing make releases as well, it just makes those bugs more visible. I'm running shuffle with -j1 because that way it's obvious in the logs where the failure is getting hit, otherwise these bugs tend to be transient and difficult to trace as they otherwise are timing dependent. > > Instead, we should really try and fix the packages rather than papering > over the issue. > > Notes: > - it *is* interesting to find those bugs; > - it is sad that the default mode for --shuffle will be random, not > none. Default is equivalent to none, I modified my autobuilder runner to pass --shuffle=random. > > Regards, > Yann E. MORIN. > > > Details: > > https://github.com/mirror/make/blob/3e20e376b7aa26fa43f81f23323c717c4cae1bfb/NEWS#L123-L128 > > https://trofi.github.io/posts/238-new-make-shuffle-mode.html > > http://trofi.github.io/posts/249-an-update-on-make-shuffle.html > > > > Note that MAKE1 is currently broken itself without this when using shuffle mode: > > https://patchwork.ozlabs.org/project/buildroot/patch/20221015005611.4054933-1-james.hilliard1 at gmail.com/ > > > > > > > >> > > >> > > >> Fixes: > > >> - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > >> > > >> Signed-off-by: James Hilliard > > >> --- > > >> package/bearssl/bearssl.mk | 2 +- > > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > >> > > >> diff --git a/package/bearssl/bearssl.mk b/package/bearssl/bearssl.mk > > >> index ff5f4e87b7..c2a5760af5 100644 > > >> --- a/package/bearssl/bearssl.mk > > >> +++ b/package/bearssl/bearssl.mk > > >> @@ -24,7 +24,7 @@ BEARSSL_TARGETS += lib > > >> endif > > >> > > >> define BEARSSL_BUILD_CMDS > > >> - $(TARGET_MAKE_ENV) $(MAKE) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > > >> + $(TARGET_MAKE_ENV) $(MAKE1) $(BEARSSL_MAKE_OPTS) -C $(@D) \ > > >> $(BEARSSL_TARGETS) > > >> endef > > >> > > >> -- > > >> 2.34.1 > > >> > > > Best Regards, > > > > > > Fabrice > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 16 15:46:46 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:46 +0200 Subject: [Buildroot] [PATCH 3/3] package/intel-mediasdk: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <20221016154646.1257569-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index a770551875..25894aea63 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 078fc882d97273754cee9bf9cab6b4d4fb3bb087765867a76f2f2b2817e3d747 intel-mediasdk-22.5.3.tar.gz +sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index aea0cac014..4080188dc5 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.3 +INTEL_MEDIASDK_VERSION = 22.5.4 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:46:45 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:45 +0200 Subject: [Buildroot] [PATCH 2/3] package/intel-mediadriver: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <20221016154646.1257569-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 949c9d5f66..35e4c97c7c 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 65652b365d48be3c9f0b3c561502952b92ee5fcc587520b88d0d752cf2a6a3b5 intel-media-22.5.3.tar.gz +sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index d6bb8bc9a6..c2d480fa21 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.3 +INTEL_MEDIADRIVER_VERSION = 22.5.4 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:46:44 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:46:44 +0200 Subject: [Buildroot] [PATCH 1/3] package/intel-gmmlib: bump version to 22.2.1 Message-ID: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-gmmlib/intel-gmmlib.hash | 2 +- package/intel-gmmlib/intel-gmmlib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-gmmlib/intel-gmmlib.hash b/package/intel-gmmlib/intel-gmmlib.hash index 9509796850..bfff5e4b82 100644 --- a/package/intel-gmmlib/intel-gmmlib.hash +++ b/package/intel-gmmlib/intel-gmmlib.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0b2253894c6fc8455b6d7c5e87e6504a76d6f60ea192e1445c2f93164bf529c0 intel-gmmlib-22.2.0.tar.gz +sha256 363084a52db1557f6e7409278c8ce46a66fcafa2b4672e399c452501a60b4437 intel-gmmlib-22.2.1.tar.gz sha256 8b7446825df3f8b0268307e272aa6aaaf78351c83161d860d02c913c22666c48 LICENSE.md diff --git a/package/intel-gmmlib/intel-gmmlib.mk b/package/intel-gmmlib/intel-gmmlib.mk index 6fec276205..e949176cf7 100644 --- a/package/intel-gmmlib/intel-gmmlib.mk +++ b/package/intel-gmmlib/intel-gmmlib.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_GMMLIB_VERSION = 22.2.0 +INTEL_GMMLIB_VERSION = 22.2.1 INTEL_GMMLIB_SITE = https://github.com/intel/gmmlib/archive INTEL_GMMLIB_LICENSE = MIT INTEL_GMMLIB_LICENSE_FILES = LICENSE.md -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:52:52 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:52:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 Message-ID: <20221016155252.1723048-1-bernd.kuhls@t-online.de> Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: http://bugs.php.net/81727 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 5fb373ec11..c4c42a2c7d 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 53477e73e6254dc942b68913a58d815ffdbf6946baf61a1f8ef854de524c27bf php-8.1.9.tar.xz +sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 77584813c3..7136fd9744 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.9 +PHP_VERSION = 8.1.11 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Sun Oct 16 15:55:26 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 16 Oct 2022 17:55:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.1 Message-ID: <20221016155526.1724052-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- package/mesa3d/mesa3d.hash | 6 +++--- package/mesa3d/mesa3d.mk | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index bf72937a66..78341e52f8 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.2.0 +MESA3D_HEADERS_VERSION = 22.2.1 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index 449fc58818..2800a46fb9 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html -sha256 b1f9c8fd08f2cae3adf83355bef4d2398e8025f44947332880f2d0066bdafa8c mesa-22.2.0.tar.xz -sha512 13a21b9ed6b0a5dfd0293b73df271a929c3155d83e8beb3d958fe18d79277f3611bf5b26a1186d446f4e1479a36bb13d0a13d6ac68937989fe7a0d917e12171e mesa-22.2.0.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html +sha256 0079beac0a33f45e7e0aec59e6913eafbc4268a3f1e2e330017440494f91b13c mesa-22.2.1.tar.xz +sha512 cb69c808453474f77aad68afae7cdb427e6720e1d2259f7b911a5476a03144bbe8adfbe040f9bed3954d92805eea302757b76fd29f03f692f725c0fd2295df7e mesa-22.2.1.tar.xz # License sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 69ddcc38ea..352fd1fc4b 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.2.0 +MESA3D_VERSION = 22.2.1 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From yann.morin.1998 at free.fr Sun Oct 16 16:05:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:05:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> Message-ID: <20221016160505.GK2503@scaer> James, All, +Thomas, Peter, Arnout On 2022-10-16 11:44 -0400, James Hilliard spake thusly: > On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: [--SNIP--] > > > Yes, all my autobuilders were recently changed to use make master(will be > > > make version 4.4 once released) with top level --shuffle=random. > > By disabling parallel build because you are using ana as yet unreleased > > version, we remove the parallel build for everyone, which is not very > > nice at all. > Failures with shuffle mode indicate that the package is not parallel compatible > on existing make releases as well, it just makes those bugs more visible. I never said they were not, and I even said (further on) that it *is* interesting to find such bugs. However, the behaviour so far has been ordering of prerequisites (and goals!), and for some packages, that ordering was enough to work in a parallel make. For example, the bearsll parallel issue is caused by the ordering so the mkdir is very early. Yes, it is incorrect, but it happens to always work in practice. And yes it is easy to fix, here's a patch: diff -durN a/mk/mkrules.sh b/mk/mkrules.sh --- a/mk/mkrules.sh 2018-08-14 22:41:54.000000000 +0200 +++ b/mk/mkrules.sh 2022-10-16 17:54:22.282069851 +0200 @@ -531,23 +531,23 @@ (for f in $coresrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $toolssrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $testcryptosrc $testspeedsrc ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done for f in $testx509src ; do b="$(basename "$f" .c)\$O" g="$(escsep "$f")" - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" done) >> Rules.mk Binary files a/mk/.mkrules.sh.swp and b/mk/.mkrules.sh.swp differ And then adding a CONFIGURE_CMDS that runs mk/mkrules.sh to regenerate the Makefile. > I'm running shuffle with -j1 because that way it's obvious in the logs where the > failure is getting hit, otherwise these bugs tend to be transient and > difficult to > trace as they otherwise are timing dependent. Yes, this is very interesting to find such bugs, but disabling parallel build in packages is not nice when they can be (easily) fixed. > > Notes: > > - it *is* interesting to find those bugs; > > - it is sad that the default mode for --shuffle will be random, not > > none. > Default is equivalent to none, Yeah, I noticed the hard way after having my patch rejected in makem as you may have noticed. :-/ > I modified my autobuilder runner to pass > --shuffle=random. Again, that is very interesting, but please, please, conordinate with the rest of us when you do such changes, because that is very weird, as Fabrice noted, to suddenly get build failures out of the blue when nothing seemed to have otherwise changed. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 16 16:26:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:26:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221015005611.4054933-1-james.hilliard1@gmail.com> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> Message-ID: <20221016162654.GL2503@scaer> James, All, On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > Make 4.4 introduces a shuffle mode which randomizes prerequisites > in order to better flush out issues with parallel builds, as this > mode randomizes prerequisites even when using -j1 builds we must > instead explicitely mark parallel incompatible builds using the > .NOTPARALLEL special target which disables prerequisites > randomization when running in shuffle mode. > > Signed-off-by: James Hilliard > --- > package/Makefile.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/Makefile.in b/package/Makefile.in > index 43d214bcbe..2327849a1f 100644 > --- a/package/Makefile.in > +++ b/package/Makefile.in > @@ -17,7 +17,7 @@ else > PARALLEL_JOBS := $(BR2_JLEVEL) > endif > > -MAKE1 := $(HOSTMAKE) -j1 > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: Packages that do not build in parallel do not because their rules assume the ordering is kept. I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the ordering to be restored. Instead, I would have expected we do something like: # Only build one job at a time, *and* to not randomise goals and # prerequisites ordering in make 4.4+ MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) Regards, Yann E. MORIN. > override MAKE = $(HOSTMAKE) \ > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 16 16:35:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 18:35:43 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016162654.GL2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> Message-ID: <20221016163543.GM2503@scaer> On 2022-10-16 18:26 +0200, Yann E. MORIN spake thusly: > James, All, > > On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > > Make 4.4 introduces a shuffle mode which randomizes prerequisites > > in order to better flush out issues with parallel builds, as this > > mode randomizes prerequisites even when using -j1 builds we must > > instead explicitely mark parallel incompatible builds using the > > .NOTPARALLEL special target which disables prerequisites > > randomization when running in shuffle mode. > > > > Signed-off-by: James Hilliard > > --- > > package/Makefile.in | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/package/Makefile.in b/package/Makefile.in > > index 43d214bcbe..2327849a1f 100644 > > --- a/package/Makefile.in > > +++ b/package/Makefile.in > > @@ -17,7 +17,7 @@ else > > PARALLEL_JOBS := $(BR2_JLEVEL) > > endif > > > > -MAKE1 := $(HOSTMAKE) -j1 > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > Packages that do not build in parallel do not because their rules assume > the ordering is kept. > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > ordering to be restored. Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and reading .texi source is not my main ability). Still, I think my proposal is better, because it is more explicit. Regards, Yann E. MORIN. > Instead, I would have expected we do something like: > > # Only build one job at a time, *and* to not randomise goals and > # prerequisites ordering in make 4.4+ > MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) > > Regards, > Yann E. MORIN. > > > override MAKE = $(HOSTMAKE) \ > > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 16:45:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 12:45:06 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221016160505.GK2503@scaer> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 12:05 PM Yann E. MORIN wrote: > > James, All, > > +Thomas, Peter, Arnout > > On 2022-10-16 11:44 -0400, James Hilliard spake thusly: > > On Sun, Oct 16, 2022 at 3:51 AM Yann E. MORIN wrote: > > > On 2022-10-15 19:21 -0400, James Hilliard spake thusly: > [--SNIP--] > > > > Yes, all my autobuilders were recently changed to use make master(will be > > > > make version 4.4 once released) with top level --shuffle=random. > > > By disabling parallel build because you are using ana as yet unreleased > > > version, we remove the parallel build for everyone, which is not very > > > nice at all. > > Failures with shuffle mode indicate that the package is not parallel compatible > > on existing make releases as well, it just makes those bugs more visible. > > I never said they were not, and I even said (further on) that it *is* > interesting to find such bugs. > > However, the behaviour so far has been ordering of prerequisites (and > goals!), and for some packages, that ordering was enough to work in a > parallel make. > > For example, the bearsll parallel issue is caused by the ordering so > the mkdir is very early. Yes, it is incorrect, but it happens to always > work in practice. And yes it is easy to fix, here's a patch: Yeah, I think a lot of these are bugs that usually don't appear most of the time but may randomly pop up under high load highly parallel conditions. Randomly failing parallel builds has been an issue I've seen pop up a good bit for my project builds so I wanted to try and find a way to make them more visible. > > diff -durN a/mk/mkrules.sh b/mk/mkrules.sh > --- a/mk/mkrules.sh 2018-08-14 22:41:54.000000000 +0200 > +++ b/mk/mkrules.sh 2022-10-16 17:54:22.282069851 +0200 > @@ -531,23 +531,23 @@ > (for f in $coresrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $toolssrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSTOOLS)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $testcryptosrc $testspeedsrc ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done > > for f in $testx509src ; do > b="$(basename "$f" .c)\$O" > g="$(escsep "$f")" > - printf '\n$(OBJDIR)$P%s: %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > + printf '\n$(OBJDIR)$P%s: $(OBJDIR) %s $(HEADERSPRIV)\n\t$(CC) $(CFLAGS) $(INCFLAGS) -DSRCDIRNAME=".." $(CCOUT)$(OBJDIR)$P%s %s\n' "$b" "$g" "$b" "$g" > done) >> Rules.mk > Binary files a/mk/.mkrules.sh.swp and b/mk/.mkrules.sh.swp differ > > And then adding a CONFIGURE_CMDS that runs mk/mkrules.sh to regenerate > the Makefile. > > > I'm running shuffle with -j1 because that way it's obvious in the logs where the > > failure is getting hit, otherwise these bugs tend to be transient and > > difficult to > > trace as they otherwise are timing dependent. > > Yes, this is very interesting to find such bugs, but disabling parallel > build in packages is not nice when they can be (easily) fixed. Yeah, I hadn't investigated the root cause in detail as bearssl didn't appear to be very widely used. At least with per-package directories disabling parallel build for an individual package shouldn't meaningfully slow down the build in most cases AFAIU. I agree fixing the root cause is ideal, I thought our typical approach was to just mark parallel incompatible stuff with MAKE1 and then fix things later on as needed. If a lot of packages have dependency ordering issues I assume we would want to prioritise fixing popular packages that have long build times first. What do you think the best strategy there would be? > > > > Notes: > > > - it *is* interesting to find those bugs; > > > - it is sad that the default mode for --shuffle will be random, not > > > none. > > Default is equivalent to none, > > Yeah, I noticed the hard way after having my patch rejected in makem as > you may have noticed. :-/ > > > I modified my autobuilder runner to pass > > --shuffle=random. > > Again, that is very interesting, but please, please, conordinate with > the rest of us when you do such changes, because that is very weird, as > Fabrice noted, to suddenly get build failures out of the blue when > nothing seemed to have otherwise changed. I've been experimenting a bit in general with autobuilder settings to try and fix some issues with poor coverage. One other reason for testing with shuffle=random is to make higher kconfig probability values more useful(as otherwise build failures will be concentrated in packages early in the dependency ordering) : https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 16:53:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 12:53:06 -0400 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016163543.GM2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: > > On 2022-10-16 18:26 +0200, Yann E. MORIN spake thusly: > > James, All, > > > > On 2022-10-14 18:56 -0600, James Hilliard spake thusly: > > > Make 4.4 introduces a shuffle mode which randomizes prerequisites > > > in order to better flush out issues with parallel builds, as this > > > mode randomizes prerequisites even when using -j1 builds we must > > > instead explicitely mark parallel incompatible builds using the > > > .NOTPARALLEL special target which disables prerequisites > > > randomization when running in shuffle mode. > > > > > > Signed-off-by: James Hilliard > > > --- > > > package/Makefile.in | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/package/Makefile.in b/package/Makefile.in > > > index 43d214bcbe..2327849a1f 100644 > > > --- a/package/Makefile.in > > > +++ b/package/Makefile.in > > > @@ -17,7 +17,7 @@ else > > > PARALLEL_JOBS := $(BR2_JLEVEL) > > > endif > > > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > Packages that do not build in parallel do not because their rules assume > > the ordering is kept. > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > ordering to be restored. > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > reading .texi source is not my main ability). > > Still, I think my proposal is better, because it is more explicit. We don't want to modify the shuffle value as it's useful for reproducing failures, although there's currently a bug which doesn't set the seed correctly: https://savannah.gnu.org/bugs/index.php?63215 Using .NOTPARALLEL should ensure the shuffle value is still passed down so that it appears in the failure message(once that bug is fixed) while still disabling parallel build for the parallel incompatible package. We want to be able to reproduce failures by passing the shuffle seed to the top level make invocation. > > Regards, > Yann E. MORIN. > > > Instead, I would have expected we do something like: > > > > # Only build one job at a time, *and* to not randomise goals and > > # prerequisites ordering in make 4.4+ > > MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) > > > > Regards, > > Yann E. MORIN. > > > > > override MAKE = $(HOSTMAKE) \ > > > $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) > > > > > > -- > > > 2.34.1 > > > > > > _______________________________________________ > > > buildroot mailing list > > > buildroot at buildroot.org > > > https://lists.buildroot.org/mailman/listinfo/buildroot > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > '------------------------------^-------^------------------^--------------------' > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 17:12:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 11:12:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/pipewire: bump to version 0.3.59 Message-ID: <20221016171257.1278757-1-james.hilliard1@gmail.com> Disable new unsupported bluez5-codec-lc3 feature. Signed-off-by: James Hilliard --- package/pipewire/pipewire.hash | 2 +- package/pipewire/pipewire.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/pipewire/pipewire.hash b/package/pipewire/pipewire.hash index 21c3119945..9bead47bd9 100644 --- a/package/pipewire/pipewire.hash +++ b/package/pipewire/pipewire.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 da1fd2e6ee088aa22f5398caca76ff879e398ec9216fb6b9400c1177b8c68115 pipewire-0.3.57.tar.bz2 +sha256 32a6db3f42f00eb95a07369160a614420443ca4f4e90ac628db8ca508e08538e pipewire-0.3.59.tar.bz2 sha256 8909c319a7e27dbb33a15b9035f89ab3b7b2f6a12f8bcddc755206a8db1ada44 COPYING sha256 be4be5d77424833edf31f53fc1f1cecb6996b9e2d747d9e6fb8f878362ebc92b LICENSE diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk index 1aad4a3c5c..d7ae07170d 100644 --- a/package/pipewire/pipewire.mk +++ b/package/pipewire/pipewire.mk @@ -4,7 +4,7 @@ # ################################################################################ -PIPEWIRE_VERSION = 0.3.57 +PIPEWIRE_VERSION = 0.3.59 PIPEWIRE_SOURCE = pipewire-$(PIPEWIRE_VERSION).tar.bz2 PIPEWIRE_SITE = https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION) PIPEWIRE_LICENSE = MIT, LGPL-2.1+ (libspa-alsa), GPL-2.0 (libjackserver) @@ -20,6 +20,7 @@ PIPEWIRE_CONF_OPTS += \ -Dspa-plugins=enabled \ -Daudiomixer=enabled \ -Daudioconvert=enabled \ + -Dbluez5-codec-lc3=disabled \ -Dbluez5-codec-lc3plus=disabled \ -Dcontrol=enabled \ -Daudiotestsrc=enabled \ -- 2.34.1 From angelo at amarulasolutions.com Sun Oct 16 17:22:41 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 16 Oct 2022 19:22:41 +0200 Subject: [Buildroot] [PATCH v2] package/cutekeyboard: new package Message-ID: <20221016172241.17083-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 40 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..389c583313 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..4720d7ec40 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f cutekeyboard-v1.0.1.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..b43595075a --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# cutekeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = v1.0.1 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.34.1 From angelo at amarulasolutions.com Sun Oct 16 17:50:25 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 16 Oct 2022 19:50:25 +0200 Subject: [Buildroot] [PATCH v3] package/cutekeyboard: new package Message-ID: <20221016175025.22545-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci --- v2: * bump to verison v1.0.1 v3: * Adding me to developers file DEVELOPERS | 1 + package/Config.in | 1 + package/cutekeyboard/Config.in | 18 ++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 5 files changed, 41 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..4640abe3b2 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -158,6 +158,7 @@ F: package/apparmor/ F: package/corkscrew/ F: package/cups/ F: package/cups-filters/ +F: package/cutekeyboard/ F: package/fail2ban/ F: package/grep/ F: package/htpdate/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..389c583313 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,18 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard example" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..4720d7ec40 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f cutekeyboard-v1.0.1.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..b43595075a --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# cutekeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = v1.0.1 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 16 18:46:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 16 Oct 2022 20:46:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> Message-ID: <20221016184607.GN2503@scaer> James, All, On 2022-10-16 12:53 -0400, James Hilliard spake thusly: > On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: [--SNIP--] > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > > > Packages that do not build in parallel do not because their rules assume > > > the ordering is kept. > > > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > > ordering to be restored. > > > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > > reading .texi source is not my main ability). > > > > Still, I think my proposal is better, because it is more explicit. > > We don't want to modify the shuffle value In this case, yes, we do want to disable shuffling. Packages that do not build in parallel, do not exactly because of the build ordering. So far, we resorted to just forcing -j1 for those packages, because -j1 hid away the build order issue. So, shuffling them even in -j1, would cause build failures. And as you said, and as the make manual states, .NOTPARALLEL disables shuffling. I.e., technically, those two lines are equivalent (assuming make 4.4): MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: MAKE1 := $(HOSTMAKE) -j1 --shuffle=none Except the latter is explicit about its goals: single job and no shuffling, while the former is only explicit about not parallel (also I do not like that --eval, it feels horribly weird, especially with the trailing colon). What I am saying, is that I prefer we explicitly disable shuffling, rather than rely on the implicit behaviour of .NOTPARALLEL. Finally, my proposal only appends --shuffle=none if it finds --shuffle in MAKEFLAGS. If it is not present, we do not need it, either because we are make 4.3-or-earlier, or we are make 4.4 without shuffling. > as it's useful for > reproducing failures, This is irrelevant to set MAKE1, because with MAKE1 we know the build ordering matters, and that we explicitly state that we do not want to be bothered by it. > although there's currently a bug which doesn't set the seed correctly: > https://savannah.gnu.org/bugs/index.php?63215 > > Using .NOTPARALLEL should ensure the shuffle value is still passed down Sorry, but .NOTPARALLEL disables shuffling, so I am lost: why would it matter to have the seed passed down? > so that it appears in the failure message(once that bug is fixed) while > still disabling parallel build for the parallel incompatible package. Parallel-incompatible packages are incompatible exactly because the build ordering does matter to them, so we do not want to shuffle them. > We want to be able to reproduce failures by passing the shuffle seed to the > top level make invocation. This is about debugging our dependency issues, not about the packages' Makefiles. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 19:18:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 15:18:52 -0400 Subject: [Buildroot] [PATCH 1/1] package/Makefile.in: set .NOTPARALLEL for MAKE1 In-Reply-To: <20221016184607.GN2503@scaer> References: <20221015005611.4054933-1-james.hilliard1@gmail.com> <20221016162654.GL2503@scaer> <20221016163543.GM2503@scaer> <20221016184607.GN2503@scaer> Message-ID: On Sun, Oct 16, 2022 at 2:46 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-16 12:53 -0400, James Hilliard spake thusly: > > On Sun, Oct 16, 2022 at 12:35 PM Yann E. MORIN wrote: > [--SNIP--] > > > > > -MAKE1 := $(HOSTMAKE) -j1 > > > > > +MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > > > > > > > > Packages that do not build in parallel do not because their rules assume > > > > the ordering is kept. > > > > > > > > I don't see how replacing -j1 with --eval .NOTPARALLEL: would cause the > > > > ordering to be restored. > > > > > > Ah, it's in the --shuffle documentation, not in the .NOTPARALLEL one (and > > > reading .texi source is not my main ability). > > > > > > Still, I think my proposal is better, because it is more explicit. > > > > We don't want to modify the shuffle value > > In this case, yes, we do want to disable shuffling. > > Packages that do not build in parallel, do not exactly because of the > build ordering. So far, we resorted to just forcing -j1 for those > packages, because -j1 hid away the build order issue. > > So, shuffling them even in -j1, would cause build failures. > > And as you said, and as the make manual states, .NOTPARALLEL disables > shuffling. > > I.e., technically, those two lines are equivalent (assuming make 4.4): > > MAKE1 := $(HOSTMAKE) --eval .NOTPARALLEL: > MAKE1 := $(HOSTMAKE) -j1 --shuffle=none > > Except the latter is explicit about its goals: single job and no > shuffling, while the former is only explicit about not parallel (also I > do not like that --eval, it feels horribly weird, especially with the > trailing colon). > > What I am saying, is that I prefer we explicitly disable shuffling, > rather than rely on the implicit behaviour of .NOTPARALLEL. > > Finally, my proposal only appends --shuffle=none if it finds --shuffle > in MAKEFLAGS. If it is not present, we do not need it, either because > we are make 4.3-or-earlier, or we are make 4.4 without shuffling. I'll test a little more and send a patch based on that. > > > as it's useful for > > reproducing failures, > > This is irrelevant to set MAKE1, because with MAKE1 we know the build > ordering matters, and that we explicitly state that we do not want to > be bothered by it. > > > although there's currently a bug which doesn't set the seed correctly: > > https://savannah.gnu.org/bugs/index.php?63215 > > > > Using .NOTPARALLEL should ensure the shuffle value is still passed down > > Sorry, but .NOTPARALLEL disables shuffling, so I am lost: why would it > matter to have the seed passed down? Nevermind, it seems --shuffle=none works the same, I assumed it would cause the submake to drop the initial seed value(for printing in the event of an error) but it apparently doesn't at least with this patch: https://savannah.gnu.org/bugs/index.php?63215#comment0 > > > so that it appears in the failure message(once that bug is fixed) while > > still disabling parallel build for the parallel incompatible package. > > Parallel-incompatible packages are incompatible exactly because the > build ordering does matter to them, so we do not want to shuffle them. Right, but we still want to see the seed value on error, even if the package is using MAKE1, seems to work fine with --shuffle=none though. > > > We want to be able to reproduce failures by passing the shuffle seed to the > > top level make invocation. > > This is about debugging our dependency issues, not about the packages' > Makefiles. Well seed is supposed to get passed down all the way, otherwise it wouldn't properly test parallel issues as those can affect both cases. > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 16 19:30:14 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 16 Oct 2022 13:30:14 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/Makefile.in: set --shuffle=none for MAKE1 Message-ID: <20221016193014.3384022-1-james.hilliard1@gmail.com> Make 4.4 introduces a shuffle mode which randomizes prerequisites in order to better flush out issues with parallel builds, as this mode randomizes prerequisites even when using -j1 builds we must also explicitely mark parallel incompatible builds by setting --shuffle=none which disables goals prerequisites randomization for the parallel incompatible package when running in shuffle mode. Signed-off-by: James Hilliard --- Changes v1 -> v2: - use --shuffle=none to disable shuffle for MAKE1 --- package/Makefile.in | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/Makefile.in b/package/Makefile.in index 43d214bcbe..c69c201c46 100644 --- a/package/Makefile.in +++ b/package/Makefile.in @@ -17,7 +17,9 @@ else PARALLEL_JOBS := $(BR2_JLEVEL) endif -MAKE1 := $(HOSTMAKE) -j1 +# Only build one job at a time, *and* to not randomise goals and +# prerequisites ordering in make 4.4+ +MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none) override MAKE = $(HOSTMAKE) \ $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) -- 2.34.1 From sfammonius at gmail.com Sun Oct 16 20:45:36 2022 From: sfammonius at gmail.com (samuel ammonius) Date: Sun, 16 Oct 2022 18:15:36 -0230 Subject: [Buildroot] Help with isolinux: "No DEFAULT or UI configuration directive found!" Message-ID: Hello everybody, I don't know anything about embedded systems or bootloaders or most of the stuff involved with buildroot. I wanted to make an installer that could be burned to a USB to run a graphical app that depends on Qt. I have the dependencies and filesystem all set up, but booting the generated iso9660 image gives me this message: Booting from DVD/CD... ISOLINUX 6.03 ETCD Copyright (C) 1994-2014 H. Peter Anvin et al No DFEAULT or UI configuration directive found! boot: _ Typing anything into the "boot" prompt just repeats the same error message. Does anyone know how this problem could be fixed? --- Thanks, Sam -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sun Oct 16 20:52:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 22:52:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/libosip2: security bump to version 5.3.1 Message-ID: <20221016205254.13656-1-fontaine.fabrice@gmail.com> Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer overflow via the component osip_body_parse_header. Signed-off-by: Fabrice Fontaine --- package/libosip2/libosip2.hash | 2 +- package/libosip2/libosip2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libosip2/libosip2.hash b/package/libosip2/libosip2.hash index 071ad7e61a..a563f0c4cd 100644 --- a/package/libosip2/libosip2.hash +++ b/package/libosip2/libosip2.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -sha256 f4725916c22cf514969efb15c3c207233d64739383f7d42956038b78f6cae8c8 libosip2-5.3.0.tar.gz +sha256 fe82fe841608266ac15a5c1118216da00c554d5006e2875a8ac3752b1e6adc79 libosip2-5.3.1.tar.gz # Hash for license file: sha256 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de COPYING diff --git a/package/libosip2/libosip2.mk b/package/libosip2/libosip2.mk index 2f9b7a9242..618d98a85c 100644 --- a/package/libosip2/libosip2.mk +++ b/package/libosip2/libosip2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSIP2_VERSION = 5.3.0 +LIBOSIP2_VERSION = 5.3.1 LIBOSIP2_SITE = $(BR2_GNU_MIRROR)/osip LIBOSIP2_INSTALL_STAGING = YES LIBOSIP2_LICENSE = LGPL-2.1+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:09:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:09:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/dhcp: security bump to version 4.4.3-P1 Message-ID: <20221016210931.54469-1-fontaine.fabrice@gmail.com> - Corrected a reference count leak that occurs when the server builds responses to leasequery packets. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #253] CVE: CVE-2022-2928 - Corrected a memory leak that occurs when unpacking a packet that has an FQDN option (81) that contains a label with length greater than 63 bytes. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #254] CVE: CVE-2022-2929 https://kb.isc.org/docs/cve-2022-2928 https://kb.isc.org/docs/cve-2022-2929 https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES Signed-off-by: Fabrice Fontaine --- package/dhcp/dhcp.hash | 4 ++-- package/dhcp/dhcp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dhcp/dhcp.hash b/package/dhcp/dhcp.hash index be03423db8..7dd80a7acc 100644 --- a/package/dhcp/dhcp.hash +++ b/package/dhcp/dhcp.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/dhcp/4.4.3/dhcp-4.4.3.tar.gz.sha256.asc -sha256 0e3ec6b4c2a05ec0148874bcd999a66d05518378d77421f607fb0bc9d0135818 dhcp-4.4.3.tar.gz +# Verified from https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1.tar.gz.sha256.asc +sha256 0ac416bb55997ca8632174fd10737fd61cdb8dba2752160a335775bc21dc73c7 dhcp-4.4.3-P1.tar.gz # Locally calculated sha256 45a39c430be0920cb9570f34b32d2378fe6048c034f2f3265b9326d64ada73df LICENSE diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk index 183c8322d6..7be40191c8 100644 --- a/package/dhcp/dhcp.mk +++ b/package/dhcp/dhcp.mk @@ -4,7 +4,7 @@ # ################################################################################ -DHCP_VERSION = 4.4.3 +DHCP_VERSION = 4.4.3-P1 DHCP_SITE = https://ftp.isc.org/isc/dhcp/$(DHCP_VERSION) DHCP_INSTALL_STAGING = YES DHCP_LICENSE = MPL-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:15:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:15:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpfm4: bump to version 4.12.0 Message-ID: <20221016211517.58308-1-fontaine.fabrice@gmail.com> Major updates: - Add IBM Power10 core PMU support - Add Intel IcelakeX core PMU support - Add Intel SapphireRapid core PMU support - Add Intel SapphireRapid RAPL PMU support - Update Intel Icelake RAPL PMU support - Add support HiSilicon Kunpeng uncore PMUs - Add support HiSilicon Kunpeng core PMU - Remove arm_fujitsu_a64fx_support for ARM(32 bit) - Update Intel Skylake event table - Add Intel PERF_METRICS event support for Icelake - Add support for ARM Neoverse N2 core PMU - Add ARM SPE events for Neoverse N1 core PMU - Add cgroup-switches software event - Add Intel Tigerlake and Rocketlake core PMU support - Add AMD64 Fam19h Zen3 L3 PMU support - Add AMD64 Fam17h Zen2 RAPL support - Add AMD64 Fam19h Zen3 core PMU support - Add RAPL for AMD64 Fam19h Zen3 processor - Update ARM N1 event table - Update AMD Fam17h Zen2 event table - s390: Update counter definition for IBM z16 https://perfmon2.sourceforge.net/ Signed-off-by: Fabrice Fontaine --- package/libpfm4/libpfm4.hash | 6 +++--- package/libpfm4/libpfm4.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libpfm4/libpfm4.hash b/package/libpfm4/libpfm4.hash index bdc7806a7c..42740adb1e 100644 --- a/package/libpfm4/libpfm4.hash +++ b/package/libpfm4/libpfm4.hash @@ -1,6 +1,6 @@ # From http://sourceforge.net/projects/perfmon2/files/libpfm4/: -sha1 112bced9a67d565ff0ce6c2bb90452516d1183e5 libpfm-4.11.0.tar.gz -md5 4811c1d99b95752b4ba53b89a9389ec3 libpfm-4.11.0.tar.gz +sha1 4c61cfb489426d9fff15428cb8536ba0e391c8ac libpfm-4.12.0.tar.gz +md5 9e4f9b89d23171eb9314a948a51b4284 libpfm-4.12.0.tar.gz # Locally calculated -sha256 5da5f8872bde14b3634c9688d980f68bda28b510268723cc12973eedbab9fecc libpfm-4.11.0.tar.gz +sha256 4b0c1f53f39a61525b69bebf532c68040c1b984d7544a8ae0844b13cd91e1ee4 libpfm-4.12.0.tar.gz sha256 beef323d68fc5db9c67b20e8e9de7ccde371d20cdbcdd686804055b18b926d90 COPYING diff --git a/package/libpfm4/libpfm4.mk b/package/libpfm4/libpfm4.mk index 2144766d96..7165d78cd9 100644 --- a/package/libpfm4/libpfm4.mk +++ b/package/libpfm4/libpfm4.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPFM4_VERSION = 4.11.0 +LIBPFM4_VERSION = 4.12.0 LIBPFM4_SOURCE = libpfm-$(LIBPFM4_VERSION).tar.gz LIBPFM4_SITE = http://downloads.sourceforge.net/project/perfmon2/libpfm4 LIBPFM4_LICENSE = libpfm4 license -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:27:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:27:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/ksmbd-tools: bump to version 3.4.6 Message-ID: <20221016212707.315323-1-fontaine.fabrice@gmail.com> https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 Signed-off-by: Fabrice Fontaine --- package/ksmbd-tools/ksmbd-tools.hash | 2 +- package/ksmbd-tools/ksmbd-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ksmbd-tools/ksmbd-tools.hash b/package/ksmbd-tools/ksmbd-tools.hash index 589128c189..b31c66bbe7 100644 --- a/package/ksmbd-tools/ksmbd-tools.hash +++ b/package/ksmbd-tools/ksmbd-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c1b9096f37eddaced055dfc90a9ed06ceb9e8ceb608ed46c51ed5a2c901ddc81 ksmbd-tools-3.4.5.tar.gz +sha256 09ab343e9bf10ddfdd3216f400b19740a391645bf3645fa6f136b8da36306559 ksmbd-tools-3.4.6.tar.gz sha256 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de COPYING diff --git a/package/ksmbd-tools/ksmbd-tools.mk b/package/ksmbd-tools/ksmbd-tools.mk index e7f2bf91bc..c4f9c503e6 100644 --- a/package/ksmbd-tools/ksmbd-tools.mk +++ b/package/ksmbd-tools/ksmbd-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -KSMBD_TOOLS_VERSION = 3.4.5 +KSMBD_TOOLS_VERSION = 3.4.6 KSMBD_TOOLS_SITE = https://github.com/cifsd-team/ksmbd-tools/releases/download/$(KSMBD_TOOLS_VERSION) KSMBD_TOOLS_LICENSE = GPL-2.0+ KSMBD_TOOLS_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 16 21:27:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 16 Oct 2022 23:27:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libgee: bump to version 0.20.6 Message-ID: <20221016212744.315519-1-fontaine.fabrice@gmail.com> https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS Signed-off-by: Fabrice Fontaine --- package/libgee/libgee.hash | 4 ++-- package/libgee/libgee.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libgee/libgee.hash b/package/libgee/libgee.hash index 54a46f954c..ea723481e4 100644 --- a/package/libgee/libgee.hash +++ b/package/libgee/libgee.hash @@ -1,5 +1,5 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.5.sha256sum -sha256 31863a8957d5a727f9067495cabf0a0889fa5d3d44626e54094331188d5c1518 libgee-0.20.5.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.6.sha256sum +sha256 1bf834f5e10d60cc6124d74ed3c1dd38da646787fbf7872220b8b4068e476d4d libgee-0.20.6.tar.xz # Hash for license file: sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING diff --git a/package/libgee/libgee.mk b/package/libgee/libgee.mk index 7d8d3d4863..5ce56a2b3b 100644 --- a/package/libgee/libgee.mk +++ b/package/libgee/libgee.mk @@ -5,7 +5,7 @@ ################################################################################ LIBGEE_VERSION_MAJOR = 0.20 -LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).5 +LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).6 LIBGEE_SITE = http://ftp.gnome.org/pub/gnome/sources/libgee/$(LIBGEE_VERSION_MAJOR) LIBGEE_SOURCE = libgee-$(LIBGEE_VERSION).tar.xz LIBGEE_DEPENDENCIES = host-pkgconf host-vala libglib2 -- 2.35.1 From cpanel at busybox.net Sun Oct 16 22:09:38 2022 From: cpanel at busybox.net (cPanel on busybox.net) Date: 17 Oct 2022 00:09:38 +0200 Subject: [Buildroot] busybox.net WARNING: The email account "buildroot@busybox.net" storage is almost full. Message-ID: <20221017000937.42DB86937BF44605@busybox.net> The email account " buildroot at busybox.net " is almost full. The email account currently uses 91.68% (229.19 MB / 250 MB) of its capacity. You should remove some emails from the mailbox as soon as possible in order to prevent the loss of any future email. Use the Email Disk Usage tool at https://busybox.net:2096/?goto_app=Email_DiskUsage , or ask the system administrator to upgrade your account to a larger quota. The system generated this warning on Friday, September 21, 2018 at 6:27:01 (UTC). You can disable the ?Quota :: MailboxWarning? notice type through the cPanel interface: https://busybox.net:2083/?goto_app=ContactInfo_Change Do not reply to this automated message. -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Sun Oct 16 22:42:32 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 15:42:32 -0700 Subject: [Buildroot] [PATCH 1/2] package/docker-cli: bump to version 20.10.19 Message-ID: <20221016224233.237038-1-christian@paral.in> This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart --- package/docker-cli/docker-cli.hash | 2 +- package/docker-cli/docker-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-cli/docker-cli.hash b/package/docker-cli/docker-cli.hash index 8af47adc63..153e0e5d00 100644 --- a/package/docker-cli/docker-cli.hash +++ b/package/docker-cli/docker-cli.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 87ba64f76d3bb98666fa44552c3eb0b1c10e5e9c43010e8dbc180ba22690413a docker-cli-20.10.18.tar.gz +sha256 f4398ad858274605f8e4e55d4618b2f5bdff6969a4afa232842bb2417d8a98db docker-cli-20.10.19.tar.gz sha256 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0 LICENSE diff --git a/package/docker-cli/docker-cli.mk b/package/docker-cli/docker-cli.mk index 707069512e..1fac21790b 100644 --- a/package/docker-cli/docker-cli.mk +++ b/package/docker-cli/docker-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_CLI_VERSION = 20.10.18 +DOCKER_CLI_VERSION = 20.10.19 DOCKER_CLI_SITE = $(call github,docker,cli,v$(DOCKER_CLI_VERSION)) DOCKER_CLI_LICENSE = Apache-2.0 -- 2.38.0 From christian at paral.in Sun Oct 16 22:42:33 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 15:42:33 -0700 Subject: [Buildroot] [PATCH 2/2] package/docker-engine: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-1-christian@paral.in> References: <20221016224233.237038-1-christian@paral.in> Message-ID: <20221016224233.237038-2-christian@paral.in> This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart --- package/docker-engine/docker-engine.hash | 2 +- package/docker-engine/docker-engine.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-engine/docker-engine.hash b/package/docker-engine/docker-engine.hash index e1c29f0926..dfd4f4e365 100644 --- a/package/docker-engine/docker-engine.hash +++ b/package/docker-engine/docker-engine.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9907aaaf39fb1c2c3fd427192e4a63d7adf8ddc9fb0e29c692a6ca10de9c34f6 docker-engine-20.10.18.tar.gz +sha256 228caadac1b37a5ba310eb25418cf1fdd8878336f1d8faf0a2daa87fcc577577 docker-engine-20.10.19.tar.gz sha256 7c87873291f289713ac5df48b1f2010eb6963752bbd6b530416ab99fc37914a8 LICENSE diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk index 246419ec4f..dc45baf055 100644 --- a/package/docker-engine/docker-engine.mk +++ b/package/docker-engine/docker-engine.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_ENGINE_VERSION = 20.10.18 +DOCKER_ENGINE_VERSION = 20.10.19 DOCKER_ENGINE_SITE = $(call github,moby,moby,v$(DOCKER_ENGINE_VERSION)) DOCKER_ENGINE_LICENSE = Apache-2.0 -- 2.38.0 From christian at paral.in Sun Oct 16 23:00:46 2022 From: christian at paral.in (Christian Stewart) Date: Sun, 16 Oct 2022 16:00:46 -0700 Subject: [Buildroot] [PATCH 1/1] package/docker-compose: bump to version v2.11.2 Message-ID: <20221016230046.451093-1-christian@paral.in> https://github.com/docker/compose/releases/tag/v2.11.2 Signed-off-by: Christian Stewart --- package/docker-compose/docker-compose.hash | 2 +- package/docker-compose/docker-compose.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-compose/docker-compose.hash b/package/docker-compose/docker-compose.hash index 46a8c59d55..39f98523b8 100644 --- a/package/docker-compose/docker-compose.hash +++ b/package/docker-compose/docker-compose.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7f051283dc2c047a40604c52dffa579a079bdf54eca742da54f8352dcffc3549 docker-compose-2.10.0.tar.gz +sha256 69d7d0311ac34ed4543f9a694995fbc4e2b785976a5a710015c20f0d04c204cb docker-compose-2.11.2.tar.gz sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd LICENSE diff --git a/package/docker-compose/docker-compose.mk b/package/docker-compose/docker-compose.mk index 1d071cc423..bc88d8df88 100644 --- a/package/docker-compose/docker-compose.mk +++ b/package/docker-compose/docker-compose.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_COMPOSE_VERSION = 2.10.0 +DOCKER_COMPOSE_VERSION = 2.11.2 DOCKER_COMPOSE_SITE = $(call github,docker,compose,v$(DOCKER_COMPOSE_VERSION)) DOCKER_COMPOSE_LICENSE = Apache-2.0 DOCKER_COMPOSE_LICENSE_FILES = LICENSE -- 2.38.0 From d.lang at abatec.at Mon Oct 17 06:21:18 2022 From: d.lang at abatec.at (Lang Daniel) Date: Mon, 17 Oct 2022 06:21:18 +0000 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: drop dbus check Message-ID: Since 6f5f6bc dbus is selected when iwd is selected. It is only a runtime dependency, so drop the build dependency. Signed-off-by: Daniel Lang --- Changed v1 -> v2: - dbus is only a runtime dependency, drop the build dependency (thanks Yann). package/iwd/iwd.mk | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 297e1fabe9..002988cf33 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -15,16 +15,11 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share IWD_DEPENDENCIES = ell -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif - ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) IWD_LICENSE += , GPL-3.0+ (client) -- 2.25.1 From jesseevg at gmail.com Mon Oct 17 06:39:31 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Mon, 17 Oct 2022 08:39:31 +0200 Subject: [Buildroot] CMake compilation database with BR wrapper Message-ID: Hello, Has anyone had any experience with getting the cmake EXPORT_COMPILE_COMMANDS functionality working in a clean way with projects built through the BR compiler wrapper? I've got it working to satisfy my clang-tidy by either passing additional args in cmake that are normally behind the compiler wrapper, or running make through bear and using a config file that passes the same extra args, but I was wondering if there's a "clean" solution that would allow me to feed this into the compilation database that does not depend on a config file or some fixed value in my cmakelists? Thanks! Best regards, Jesse From neal.frager at amd.com Mon Oct 17 07:10:01 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 01:10:01 -0600 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset Message-ID: <20221017071002.48266-1-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu102. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager --- configs/zynqmp_zcu102_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig index 217fa0814b..66c24c4b64 100644 --- a/configs/zynqmp_zcu102_defconfig +++ b/configs/zynqmp_zcu102_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From neal.frager at amd.com Mon Oct 17 07:10:02 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 01:10:02 -0600 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <20221017071002.48266-2-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu106. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager --- configs/zynqmp_zcu106_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig index 3d98dffe01..896fea0ab2 100644 --- a/configs/zynqmp_zcu106_defconfig +++ b/configs/zynqmp_zcu106_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu106/zcu106_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From thomas.petazzoni at bootlin.com Mon Oct 17 07:16:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 09:16:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> Message-ID: <20221017091644.1104527b@windsurf> Hello James, On Sun, 16 Oct 2022 12:45:06 -0400 James Hilliard wrote: > > Again, that is very interesting, but please, please, conordinate with > > the rest of us when you do such changes, because that is very weird, as > > Fabrice noted, to suddenly get build failures out of the blue when > > nothing seemed to have otherwise changed. > > I've been experimenting a bit in general with autobuilder settings to try > and fix some issues with poor coverage. > > One other reason for testing with shuffle=random is to make higher kconfig > probability values more useful(as otherwise build failures will be concentrated > in packages early in the dependency ordering) : > https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ Thanks a lot for all this work, which I find really useful. However, like Yann said I believe we need to coordinate better. I think we would prefer to see build results submitted on autobuild.buildroot.org to only be generated by the official/upstream autobuild-run script. Otherwise, it's super confusing as we get results that corresponding to variations of build configurations/build logic that we are not even aware they exist. Another concern is that the autobuilder results are already extremely bad these days, and therefore the priority is more on addressing/fixing the existing issues rather than adding more. It's a lot easier/practical to fix new problems when they are not mixed together with zillions of old problems. Again, thanks a lot for your work on this! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 05:37:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 05:37:07 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-16 Message-ID: <20221017053714.E48DD40482@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-16 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 5 | 3 | 0 | 8 | 2022.08.x | 10 | 13 | 0 | 23 | master | 109 | 577 | 12 | 698 | Classification of failures by reason for master ----------------------------------------------- berkeleydb-5.3.28 | 35 bearssl-0.6 | 32 ca-certificates-20211016 | 32 glibc-2.36-44-g2628500f5dff... | 25 gpm-1.20.7 | 23 libnss-3.84 | 21 slang-2.3.2 | 20 coremark-pro-1.1.2743 | 19 host-gcc-initial-11.3.0 | 19 host-gcc-final-11.3.0 | 17 host-f2fs-tools-1.15.0 | 14 crun-1.5 | 13 host-binutils-2.38 | 13 brltty | 11 linux-6.0.1 | 11 sysvinit-2.99 | 11 autofs-5.1.8 | 9 dieharder-3.31.1 | 9 systemd-250.4 | 9 xz-5.2.7 | 8 btrfs-progs-5.16.2 | 7 host-gcc-initial-10.4.0 | 7 host-riscv-isa-sim-1.1.0 | 7 package/openssh/openssh.mk:... | 7 gmrender-resurrect-0.1 | 6 igd2-for-linux-2.1 | 6 libarchive-3.6.1 | 6 ocf-linux-20171122 | 6 fbset-2.1 | 5 libgpg-error-1.45 | 5 dash-0.5.11.5 | 4 efivar-38 | 4 gerbera-1.10.0 | 4 host-gcc-initial-12.2.0 | 4 libdnet-1.16.1 | 4 libglib2-2.72.3 | 4 musepack-r475 | 4 cryptodev-linux-1.12 | 3 dmraid-1.0.0.rc16-3 | 3 freeradius-server-3.2.0 | 3 frotz-2.54 | 3 gobject-introspection-1.72.0 | 3 host-delve-1.8.0 | 3 host-gauche-0.9.12 | 3 host-go-1.19.1 | 3 libee-0.4.1 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 linux-5.10.145-cip17 | 3 refpolicy-2.20220106 | 3 sslh-1.22c | 3 unknown | 3 binutils-arc-2020.09-release | 2 duma-2.5.15 | 2 host-berkeleydb-5.3.28 | 2 host-binutils-2.37 | 2 host-binutils-2.39 | 2 host-gcc-final-12.2.0 | 2 host-moby-buildkit-0.10.0 | 2 host-protobuf-c-1.4.1 | 2 host-rust-1.64.0 | 2 host-vde2-2.3.2 | 2 jhead-3.06.0.1 | 2 linux-pam-1.5.2 | 2 lttng-modules-2.13.1 | 2 mimic-1.1.0 | 2 musl-1.2.3 | 2 nanocom-1.0 | 2 netsurf-3.10 | 2 open62541-v1.3.3 | 2 openssh-9.1p1 | 2 openssh-legal-info | 2 perl-5.34.1 | 2 portaudio-190700_20210406 | 2 pv-1.6.20 | 2 sdl-1.2.15 | 2 zeek-4.1.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 am33x-cm3-11107db2f1e9e58ee... | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 botan-2.19.2 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 check-0.15.2 | 1 dahdi-linux-5c840cf43838e06... | 1 dawgdic-16ac537ba9883ff01b6... | 1 dmalloc-5.6.5 | 1 elfutils-0.186 | 1 exempi-2.6.1 | 1 file-5.41 | 1 flite-2.2 | 1 fontconfig-2.13.1 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/squashfs/squashfs.mk:56:... | 1 gensio-2.5.5 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-gcc-final-10.4.0 | 1 host-gdb-11.2 | 1 host-gdb-arc-2020.09-releas... | 1 host-pahole-73383b3a39afe86... | 1 host-spirv-llvm-translator-... | 1 json-c-0.16 | 1 libabseil-cpp-20220623.1 | 1 libcap-ng-0.8.3 | 1 libdcadec-0.2.0 | 1 libgcrypt-1.10.1 | 1 libgeos-3.11.0 | 1 libnl-3.6.0 | 1 libostree-2022.6 | 1 libxml2-2.10.2 | 1 linux-5.10.145-cip17-rt7 | 1 moarvm-2022.06 | 1 mtd-2.1.3 | 1 mxs-bootlets-10.12.01 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.2 | 1 python-ujson-5.2.0 | 1 python3-3.10.7 | 1 quickjs-2021-03-27 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8723ds-76146e85847beb242... | 1 spice-0.15.0 | 1 stress-ng-0.13.05 | 1 tealdeer-1.5.0 | 1 tstools-08f6be304040e7b8476... | 1 ulog-0389d243352255f6182326... | 1 umtprd-1.6.2 | 1 xserver_xorg-server-21.1.4 | 1 zeromq-4.3.4 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5a52cbc34caf1cd92943a57218ec5bae5a543339 | sparc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5d3497192a7a41a7cc66b7abc7fa38e6fbffe408 | aarch64 | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4f1029fd46d2a6348317329679e1b7ece58ca5fe | arm | am33x-cm3-11107db2f1e9e58ee... | NOK | http://autobuild.buildroot.net/results/bbaf19c0de5d97aa4885985b2ab885c7713ab693 | ORPH mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/190abe408e3e8d8484b241be821a1ac3dcc580c3 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/31faa9e66d8708a18a88ee9071272938eb961a46 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/37d7e57494f323693b33e546cb9298c713ae5252 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/85cbc365394674c8c5b7dad98238a251707f2d45 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/7595002a3232201b68b751c0177290484ca6be28 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/865b42ecba3dd617189db5e3825aa843de6c815e | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/c363392721ab4f51f201962b1bd0beb9a49d26dd | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/53dadb83229ac08197b8777e11b05fe0bbb68f4e | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a8a7f53aeb2e7b7b8a2f1d44b3876a416351322d | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/d9f7cdc15d5035259ee8e2b2c2f705e9b7fc4aea | s390x | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a344b1cbd15e9e2a29c7bba7fb30a4da7e163009 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f98b7373227b19f298c79ffc0faf8c35d1462d9b | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8441906b91f0090f27743b9132a311f2d6212e08 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/f85adeeba7558449239e89b47360a1e797fa8694 | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a7b6b75dfa84f306ef86be41135b11c209ce683a | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/cd483c5a1569ea03c8c014ecbbaa55c9b1f045b7 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/392eb25bbb6131b687088ca39826ad10845add87 | armeb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a62bbbad1e149a98b17345296df2e5dd7db1eef7 | x86_64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d0e6269043b6c0c10e8e3e428ca427ccd149fd05 | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/3341556eaaa8b35971409a8a109f87fcae202220 | aarch64_be | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/550b50b820678731bccdcc7440df6b000740dce6 | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a77800cfb486ef59b7164205dcfc11429969212c | xtensa | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/206da97c9460408257d268acc04e285910aaa2c2 | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8a88dbead5622aadd1230a4d25129f16b08c4567 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c62eb9cc26e98c56a985e297c541003792fdc99a | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ffcc891015349e66c09ed46a01733835484ff693 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6242112c75c76e85b207ae72fdede5717f07903d | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ce957809e083f84241f4f06e3781031cb90f29a8 | or1k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6bb298d5137f3b27ef4eec7766ab9989b1032965 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6e15584544a56fbef4aba831eb77acd4c7034e23 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2ea5debf640de75e9f9618c541271463f19825f4 | m68k | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/07fa1f80b7a0f5177e4ae372afdd8308da90612a | riscv64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/466ebeef6f728b8683e97074b0f876feac6abfd5 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/60dd6aa468d529f103161590ac87fe4b681c3138 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8ac030ebbe944e6714c789c03e2cede3503c713f | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b5d6c0ca5aa4ac4fd31efd7666fed21614bb645a | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/150fc609cf25b357aaf224bfc6d56eb0eac4f659 | mips | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/dd6a492ccd9e34c4b56ac9942fae563202bf4c88 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/5882d2810d3f0b510e1f24529b11679d369e0f9c | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/586d8dda030b8c56ae4de3addca07524bc14bc99 | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/1bc07c2a7e7cabbb5f4e8c5adc3cfb8ce30b0273 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2bd8abf64d8ba675a7563d3f85cc8bbda38a4438 | powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4de27634ec1e47584fac581f1bd7c7c04562a8b9 | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d52f7e0489541554ea2bc21eb275a8eb2b7ba4f1 | ORPH sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c02ef451d836cc6f8853b9d11964f07907ce5566 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b335d1b8d6c92d51044b459dead01630395abc50 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/535909d4fe7645ff6c845a9d40218835c68656a7 | ORPH arm | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cc111ad3a6cf604a00523a8724dd9cfb443eee32 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/aa3ef68f35de57393f9da7ee4a1a551b96959614 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f3657f7c6fdbfcaec5110265d33a710046b40b9a | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6951c4d92dd6475a127bc339a55bc36d209ea177 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/252021bd795fae17ff412e73300d106ea568ffd1 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2b0339a3bd02e8f9ff6bf68631ca72ec7b4a23c0 | ORPH sparc | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/ba70a48fc2adae040296d4ae2cc39926f02b103b | ORPH or1k | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c9fa04b02d5b62fc70cadf85a25001880c9494b9 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7f75f83f68cfce39d0df68d9bfb6090113482959 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/81ca3362b5b69b34f9e44c545d7c1f9d8e933626 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/e5376ae72061ab805279c9180bae70684e3e8dfb | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4c5479b14cb55f7790904727ac281089f1f697d4 | ORPH i686 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/4a7fadb67f5f491c60d32c4b7167c7758b8952f9 | ORPH x86_64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/36fe9e94c3c2353a95afe106f903fdce929f0185 | ORPH mips64el | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/72f3793655ff542807b3e0e5f0f6ee5a06f95fdb | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5248798f1eb2fb1d9a95df5f276d36336beba01b | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1c24aa1bcdac1c6c1f30c0941dcfe80c8be845e4 | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cd02c8b8b0c9e31a0dbccbb11cf50f01e9cee319 | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/cf192f03a8ff3fb0a65320aa59f426f99a06f577 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/1815484aef016109cd7203d09c6e14d10bf7a0c7 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f6578a04a926efa05965313398243710ab83fc92 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0ae4d371eb4c9156905593a7a9c6f7aa55a9eeae | ORPH nios2 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a4cdfc8cd9a0961f591871fec860e722041185da | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7b0f84e2a90e3acd4c4224a324cee56ff22627a8 | ORPH sparc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/b076316ab93a8fe685265b56ae228347ea417bd1 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7ee066dce50cb77b47870cc9f2b575aeeb7068bc | ORPH sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/88ad7f9b8fa333c0150a6d11fe66d11e9517b36a | ORPH powerpc64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/63be92bc0472d0a2ff2fd94c73f4707687c3b971 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/27555ee67e61b1d7839926908faf4a4f3948e72f | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/fd86e270db65f9dd501d7e1b2a39d53d15e6f093 | ORPH arc | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/2b4dc4143a478f106397e279b86372825dd1f488 | arc | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/1df94f7b1030150dec442bc91a98d0654582f7fe | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/44d56870a4e310621ee2a5597b0432ba4a805b09 | sh4aeb | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/e9c7e1b03290873c630f665a6398c6ee790786b7 | ORPH microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f1b7344ad5809336c6af2e015ee1ac21fb70b940 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/8d4cc2c82b36fd9c0916ae6fa4d6842cc6939ceb | or1k | brltty | TIM | http://autobuild.buildroot.net/results/55666f77b10537d2099523c146e756c01e9f7f95 | mips | brltty | TIM | http://autobuild.buildroot.net/results/250d530c76294d8dbb912de910a2f5a7a9d3e84b | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/a4cb6ce519db0c60c1a69c9800b2de42f5cb3801 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/171043e4a70fcc42058a5ed5d68962ceb23dc004 | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/8ea088c2d59af9b712f692263552c97e3575bc01 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/96a9a0bc04171f8adfd7f0a6d694ac2d19b5de85 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/babf2a4c2f23a843f59615d3079851d2faba23ac | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/4ed527dbfb4d18052e651c7a08834b1860bd4267 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/477c0339e004a3a78267a35b54a7c261e02574e2 | aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/70e6ceb54adf80cce4d70047638417db707c6dc8 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6c7132023aab50c61ef3c808e180a5476c5b42f1 | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/73972826b16eab0da5a667301d716eff9a31af06 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0f08c678e660affb71a57b135bb773093c789acf | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/932d61e3d486a49b55c7dcd2936146253db2e6c7 | ORPH armeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5465f6e5051d3a1180f35eca2459b38f40ee2fc1 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/34aa5b04bae683c6a08a6f6b87490ee0d0ef4f9a | ORPH powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c903018c748109a299af8e40db4cafd7b4824319 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/31c71a9f3f07520659a9ef04ee79b04c1584faba | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d654d5d22de2f66ce3fdfb44e2a15d2c42f0d08c | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b21ce0902e8c7549dd144455e6b239c365175901 | armeb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0464207ecdc189cda4f8cc8f3bdc135a2b729a60 | sh4eb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/4bfa3c221cb691b463d75343b7767dd1815a51ff | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3aba216a21fa69851774d02ed8d333e949f39502 | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c3929f49f3616e49d3e6e784657302c2dcf14107 | arc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a3ef9097da9da50a2a5cc1add2986242cfb4fe4f | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/11be16bd2c829534917e8b68f78a274a978a6780 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/cbfa75709ab1266b048a03ca5cb5cfafb804a1c8 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7793af50cf2865905b817059a225e59d56ffd6d8 | microblazeel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/af682ad20a044ab010d274971da686171c58bf38 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ceda33923ac69e15c0a832aac121789bf24fef8b | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/61ecf82cf4129650d32b97e5b549c7433c966466 | sh4a | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d14816191561e40e97c3983ad3450fc46faa722f | powerpc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/7bbbc6a9698423aaa616bb75ffbb2951f3b6450e | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6d845a24aa8e489675af9d25557f738d80e22720 | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/181efe03de57f502647672084ed389a7d2a34f56 | riscv64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/eebd29ecdc78af3a185dc1781dafac3280fa31e9 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/e442ba9c9961a16177a0ae4b81d69ed26c15a87f | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/0610527ebad2d6cc688e8fcaba03d7900d32c9f4 | arceb | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/46e6094644b12e3cf24cfe4709b35bac116e6d01 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2fcf84ba162c9e88254a29c8eea3ba090723546c | or1k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/22acde26d6cd44cf1888fdeb5902c9eec314dd11 | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/21635bde0576abda263c84cd8aa635ab7f7823fb | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5c8bde63aa4110109611397b8824b4b4cbbd669a | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/d17b776b47b195a1d6c0364ac6d714d00ab46f49 | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/81905f969931317a7667b474b38ce19696bb753d | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ecd11bb80b21b3c8bd860ce127ddc671869d10d7 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b356c1bd90fb07c799c727ae667c2b19df560fb4 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9e4261d779684db137ea96b5d806eee4498ee800 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/62bb1da627189b5a72b0dea92cbc7b8f695abfa2 | mipsel | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/00042bec42276e687688386063bdb20762d522e7 | ORPH powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/df43bd014ca6893a7eb169e9b4d2e502ec5e1d00 | powerpc64le | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/b0f61e016c8cf02aa40340a29058597144d4666f | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/3e53eaa43bf91ff7d72062b571122860dc04e622 | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/9b796a28caf30829305664da5aadb3e8384ae4c9 | riscv64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e4a83bc116adf90c82072f4d853263bbc0bb8488 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ef6312f90575873475189e718355bf40b9d1735c | or1k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/fb6aaa0cbc9d429273c932dc380b75930aba0668 | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/ca5a2eefb7100a1cebabac749ad26392e61e3d21 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a0dd0070940f5475f24c691e298b5b77b4429337 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e01e869ddbcfd8e16612e06085ffb81320435d92 | powerpc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2ccb37373c29012660825a2a652b076eeeaf279c | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a3a9f7c4c75148e7ca262352d2f6bba4887d5dfb | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/498899ce0cec996fb28dcc6f85961c3e4026691e | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/166ce4fd830cdff9d80c6020b5075aeaf01bf463 | nios2 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/261ca3400284a9f7d72cb0811508e996ff80ba86 | mips64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/549f9e10b062adbc2dfb42aa08ccd64bcc3decca | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/bb105728edb41e45b3a046c1f23f0a9e6a692401 | m68k | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2f65baf8a05655c85b4f1791e30f786e2b34f4b3 | mips64el | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/6ff34ec32984884494827f3a23aa4a2152428c43 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/07eee5783dffa09a1b74ca99f06cb28fecf2edf0 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/634cd2c73d1947068d8b816bd487b9531b24fa5b | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/057be8fe620761c452515c268a2542a17324a7f0 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8444bb6307ca3729f0e8e967de8f74506aa34f21 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9edfd0509c6a83b4d7706deb52a1bd1adc91a8b4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05bf7ff82030fe5fc5b49d03348ea85030eb3026 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c7d506b1bb0e4cd291e9fe4b544985a90a89625 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f6247464c13964d1013310b69008ee7e363e548f | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0f7d0bacfd62007ffe542492f4872b2c6859003a | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6206f632566ba43f38568fa82ebac1ad8edf4946 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bd0b03c5e1a3895bca1da03171128d86d66f0084 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0ff4bb003f48526c1abddc1be56add18cdc969af | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/533dd000b4aca920e6d814f591d7ae41d15fbf36 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/1376166f93459d280d0c9298e4ef82a62b5045eb | ORPH mips64el | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/3caf837b8dcb2b0a34381eb0b789b980cb902e90 | ORPH mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/be36ffb6a449103e3386d811d6b4909ec1f1b592 | ORPH sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/2fd9e5a30fdb6f9518d0c6ae20ad5c17b8dea360 | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/89109a89c25a7b857c8e52344938e015e12d852e | ORPH arc | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5b328e0d95a95847d7425f6ffdf2366795e76e89 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d5e414d4b7b19e0cd2e6c8f7f9de624fb13df934 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e7cba0eda02dd1bf756a6de35c8d68068d03c933 | ORPH riscv64 | dawgdic-16ac537ba9883ff01b6... | NOK | http://autobuild.buildroot.net/results/0a140421fe9d0e2a8e45a48a212d0b30839a4058 | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/adaa1549034c2a0f2eba3279ca8999dd9e982210 | powerpc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/41880549f60d549294a4865af8bfe73e80d6ef3e | armeb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/0bc6697f9427f1a7c17b39c8f7e04a6d5e6fed36 | m68k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ab1d3ee87c979bbeaff48f0ae7d92ed8f3d504b3 | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/517f7bfec5df0fc6746844529c2dd095d805052a | sparc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/c12c192c8807d9bc580d47033184f2434c5d9fe6 | or1k | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/71622d71e98dea61de87c42f3f551da54acaa18c | sh4eb | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/ac5f6e63d6c91dc0b0850ebdd6c05ed32eb5ae01 | powerpc | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/63e2b5b49f5b7261064844e2f4e690b4a56560d7 | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/e69cce746ac3147380676c051100941b0d8c3d8e | ORPH or1k | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/291f23347b990c975755d984fdcbb1d3f8fe9a51 | ORPH sparc | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/4e3ce1ea440d4916db50c37e54ba9ac816af7c32 | ORPH mipsel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/81e002a615d1e1abc5b4201b5a4e7c4fa4c052a9 | ORPH powerpc64le | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/32ec270839979e2e49dc3ea5270711a17dad94c9 | ORPH arc | duma-2.5.15 | NOK | http://autobuild.buildroot.net/results/0638b7f99bc3b36766e2d6d8d054b8098bbb369b | ORPH mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/a1818b88ea2587573f9f5f8f2ebcf1ba41e413e9 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/099297cc13d62758b619b1481b1693ad89749442 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/9d0c35ee6686d0a74fa7d40542abdcd4b9366afc | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/2e15d3f412deaf0491c521cf3e31b5ebce1b2d5d | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a131d999a478a265e775f998956053510da5ef69 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/f226ae8bd8c6b6fe433faf472f04d3ca37474dd4 | nios2 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/ece79d65cbfbb92e1b8ac06612197455ef342207 | ORPH s390x | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/33cbe08278a3c08e43583bad5381b12e93b4dc63 | ORPH sh4aeb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/551ca765a698db848ab75cf3ce30003f17d31f6f | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5a20cf8199b71a4e642307751e06a4c6beccfdf4 | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/90ff418d2d1df8808fe5695e38ea59206e73ac8b | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/8cdce6634f956366b5e386a0f9cc1086d87216e2 | ORPH mips64el | flite-2.2 | NOK | http://autobuild.buildroot.net/results/302e5afc852d2ef1f712a7c96dac7acb38c2014c | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/9ce697be04647cdcffe2cbd4687d597fd6800ef3 | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/dea62647204f639b32a21570579875fd38f325de | riscv32 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/62ae9b8e9af1674cf44f7506c964508978831399 | aarch64_be | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/c4dc6c8ee78b2855494949322d9a1f6652f41854 | microblaze | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1edfa340d105c1f60c74f388a75a8624cfe6effa | mips64 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/a004b6fff75f0bfe9a8b5edc275c75aa8ee91004 | xtensa | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/4edbd30f0dc87da491a6f5df22034481d33ba71b | sparc | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/cc22c958b97aa3cdc0853afd97ce78fca8e9047a | powerpc64le | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/04a4a0b762ce013cd81c4a58aa4522b3d7c9ac17 | aarch64 | fs/squashfs/squashfs.mk:56:... | NOK | http://autobuild.buildroot.net/results/5ff5bdf5733e2e65febecf7698299367b672dbd6 | mips | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/46f2d2d66e73e02c522ae51fbf832edda636ad9a | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/426b8fe9f8487bc1e467939d6de22af304ae5ae9 | microblazeel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dea58aed92a88d40849ba10a000e8cad818d09c1 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8088df80958b9e9bed960aa1d242f91f24848e3f | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/330cefbf740ddbc839a882e7ae806307d1e7a093 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/63b05ba4f573c0ba9cdbdddd1657adb8de98e1b9 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ace71289a94ee53aef39107c746c01ea9467889 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad0b16b463bcec649abb69faca2a0b36b0b95fc6 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/fd4816bd8422653fdb3bf55542bfd5a1713fec63 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee96854cbf7960d83b660343c3298a84dae5c0c4 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97b40943842d50253b6d799a7f4b5931b03b5b25 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/728e8627c2eb6b0ddd95e54532fa153545fafa35 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d09c5cf84ac861e3bfab91194cc28992f3fab97f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dea4b0d5f0af254d375028cf38cda0f8734376ad | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d427910d65e6ee0c74112840a958555da55884cb | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/aaa376ad555413184bf373641d1769eeb97dff14 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f21f236e9c81448709753fe7252b3e2cea1b2472 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/db9ce3d59577ec9692f8192a0ca52d81fb70b15a | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/249006c33434a40a50875b21f3157c615119cdfb | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/803dead9199202b16a443379ef3f2d7c802a22ed | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d2fa90cf0eadf5c3ecaa7a850f6cc7b9190e0ce2 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c60ec9632ddeee3316854685d6ac05dc295df53 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ac4a31dfda493c745a9bc3db9d09767724858ca | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/177df4950770473f3401e130a9fa992e06c05f38 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7b0c801fc323572ffd9f9abf187f1dc93776e8f | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d429cbaff65b90225f985db7e73d296776efdf0 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ba0bb5c7b5d8eb537f2f6fce0bf19bde7906077c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d153a59bc0e54e2e091ebbdaffdbe9d01e17b9f | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/07ae38d9ba027f4bb40fef993cf63b29799bc704 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d9e8b95d59a217df639072376ee18bfad6579ef | m68k | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/0a9414447d7e58a63168fdc73379f056c84932f4 | sparc64 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/73f17229b7765e0b8b7b9d4b99d5c8a4f472eeed | aarch64 | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/d70ce151a6968d577f98d77b4b8f943bdbf299be | mipsel | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/3f068c241a4606a4c5176a4db0fe0abc0840425f | xtensa | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/4c24ebb0bc70cac2819da350b8b3e622f18afd04 | powerpc64le | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/054e58944a43d4307e5094b77d848d5c0054d302 | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/040cba4b97331ddff8f430cf4fc5aad17e8e96b2 | powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/87a8c1f08eade887ff89ac4fd931eac6494e09d4 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/94c6f79d50795b5f8fa116e982327d766a042190 | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1145e5c4151e12e1230129c5aad3a2a372a18b62 | ORPH x86_64 | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/6731463b23097d63889142c915ccd5eb87e322e8 | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2c231d37df37b7c45b443ee5a88d8d609f774560 | powerpc64le | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0ef9d224dfdbb8b6efbed29619b01eb60fc834ed | powerpc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/5d1132f93bd8b397b2cf2e1baec51a792fee0b86 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/18835a1d813552039ca9379f6d65fdbcc17072af | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0ae91e82194d01b8dd577baa7b18b855ad91e487 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/0bee985f9257065ef54b9aac6c1e2555eae5228e | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/061bb4d1b97085947f64735ca9e85e8494bcd682 | mips | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/26638bd29540a905f35d6dc0124d7ec7500a8065 | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ab78b4da019dda39696ccf792cc4a7c50c5ecaa | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/d6e995d6fe07dda452671f12fd21dac089900e29 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/a2256bd694de7cc585595c7477761a7d8ac51db0 | arm | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/029a2e62b7fa177a4abff1f7e662d7305d65b0e1 | m68k | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ae848b7eea1e50b528981aa5f7226ae4aaecd16 | mipsel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/db22b1e21f9577afbf2fe660d1a60f3dff83ef53 | sparc64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/065f753371b4374e0c28d62378d95b5c89c3542a | microblazeel | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/2ef175fb9e6511a7f3c2199fd55536875d6ae687 | riscv64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/40e84957189a3bfc508c28e4a17b7e45c4c30aa0 | microblaze | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/822dbaac138799cf6476c88fe3b90cc1e5fc342a | nios2 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/4a7e98a687c5c90a39fa625e441dc8911555b601 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/288dac574f72efde40700ce5c21896c05ef90fb9 | s390x | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/4cf2f9603219429f72e372c9e38818b6e1aaef46 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/efe6f32dd3f76ef32e01455e68d68bba2d0e02f4 | mips64 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/8da169a967703b516eaf5ec69a8c5f34ffb81669 | m68k | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8066e1e5858b0b48013e67d4fae414837659cff2 | ORPH mips | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d3ba80bd7a604a50148f35748bd6ab4a6f8c50ae | ORPH x86_64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/a26271ad14eec5d473477a8e601a0884e2adb47e | mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/f22517ed81964376060c3998537a7a1a8b872427 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/32af7ff0a7c640ac027317ec17571c922dc95b02 | arm | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/23271735473e6bfe15054c7b777da96341e7b967 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2010aa592a6a798d4d54a4df8a6bbb9c04a5412 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/059c7415b385a7efc495183b1595b3ff5897c4d4 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/79d8fc2c2a2ccbcd36294bfa1559328d02a612d2 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cb2f591169ce83a686880edfc38573021e69fe0d | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/616b343c6f1444a14e03839e223c38763fed15e3 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5dfbad5135545da511233506be36d5dbf89fed9b | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/023a2d658a955b23669c4400d1cc4e6812a2acef | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e83592f802ebe0da262635c4ba8c82fc86f0c84e | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/97893329dad001553fcd0f8d5c4857edad681514 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ce247478fb57897820f57a36396939811d2c834d | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1a49f2bb728136fb40383171d8bed79319ac06a4 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/429f96573606a1b1baec4ec8f2b6732c90e46415 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/37e5cbcdecccefe35dae36c3901cc0b8a8e84baf | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/019d46271678c6027f950165657fe556dfdc1032 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/0c5c88a5fe2a3ad35fbae3e0fbd79a4022a999ac | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/f407bcb88e7e99abff60de4816db48336071b48d | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/82d73864652f86d157b32da959a06215194223da | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3fb36969e277a4c999725db8100972eb54616d81 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0734e1bea7e3e4864b2b3cb1bbd2bb7529499fcd | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/04d1b5642b6f8128acd07eb9f38c939235f7531a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d55691d475db8d8e7272e5fb40d9e928829e46fa | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bc0599e659ffe38aeb151e0aa2bdc642f4879531 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d0a461b362fbac19a21293efb89836d4b4414302 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/708cb50f9968a6bc365263b58bdfd0f5fa1b2290 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ef319c1353d951fff15c8bb81c2775476158ab9c | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eb14227f9d32da638be653e36f0d6eacfff32354 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0653c12561ca3b54f2778c164e5baf6e83212cad | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/11c647b62200349a6200a46809f5ef14359be869 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ae171f97b88e1998e6ac0fd776024e73a733ae7b | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/95207cd6f6c44e4e7663b2887dc610db31412da3 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/893f4a9229fcf4ab9b0238a15a67b23487db5bc7 | powerpc64le | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/7e941e7938cb8577867f07eac6106bb35db99cf7 | powerpc | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/5c266344a524222e561f79cb8fc25e9a1734afc8 | armeb | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/a61dc7d217cbd382bf381f818755e5c9fc8d6709 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/dcee1304f497f8ebc346cb1deb415ca0666e68ae | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2a5b0c8581a05d4ff6044feddef2414766ad7ba7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/34731d961899a17ba75873d982943466974a2367 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/028c34b0f780867ccc569800ed550e9cbcf800b4 | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a0d1f917785f383508bd5c7007c8450c54ae3803 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/1adb3303ac36fd8f7b5d07f766dd286744237307 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/7f846f77b6ad70f7921e4ca4f4b69a9c09d37d67 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e7b2eef6a9dac294a26f147ea9a32f0150480148 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4b0a9eb126d10bb80f7473de96ac66394db4c4ea | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6d62d8b978e53aa38e303928058694e9187a1b95 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/52ae4ee1180b4060a823f15a61eab0c664d9a142 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/077791bc4c92148c0407808574997b1e88da2fff | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/590c993f24d4dc1c59e88e33d781e864d9e3c9df | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/99b3625d0b67004f13742c68e8753fdd8155b973 | x86_64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/08c84f0fd867157c4398e45b4863d995f9f489e8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/82b2f6dbcf997d64c6cc650b38534b22292fdc4d | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/76a2cf0b6d4a999a930d245f88d5daf52c7725b9 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/85df4ee78aea9f14b03aeca54598f581e480bb76 | i586 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/6bca5dbdad5735ea2e704fcbda3289cd5d8d3802 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/bc7486df309175230ed43f321ed40bd1d6912155 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/a50b39978236b8588c31c75840ddf4a0c9667c4f | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8c0fb570519df8a8af115d0797a688629417b160 | i586 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/45f652838c1de8b1cad7217a5783b03197b857ef | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/8108187ff009f615820830e35cdb356dbe93bbe4 | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c6a8faec7b59ecfeeacff801d0c4691d1bf97eed | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/a4a24306e93f9c8d6654e38d202b66f72a4d8e09 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3646102b8094669c9305b2338bbfdf436f028033 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6fdb549741222afa4f4b087f087253a56a2e2c96 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0907fe371efa7572b66a29d2b8293a0b6d869994 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6b40c68f63e2688a3730301201ab208df1687f84 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4fb65a4b44f23bca3eea6c1b73818786493c4fd9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ac3888d5e9f205541ee87f42b55189c420d3c031 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4fcbed6379204d3c87e423787b4358b0f9c26d8a | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/430134dd47351f6894328484f94f5e4e3e55a886 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/06d485a6bc88d88feef3baebed769fb12c606365 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e868f4161f49f0b50fb76495518067f6ad99cefa | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/303f18d126f4bf7138ba087cba2e2100c0a1f061 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c028a39a42d6971157bcae5ca906d9a9dd8b1066 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/419d2b7139fde8dc23b97cc35587c7b1a908ea22 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/4a4553de37421a74eb09d13cc8018b739e2b0522 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e980f26e1b4393292d29ffc9f99d3f73e8e06ad4 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0b427c953f40a0469463eb61a1ce16f82393638a | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/d5f78c4883114474498cd9bc405798d1f0a37a38 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/e2542e702cce1edc8e9f44902ac2d8c9b769b386 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/05ed7648480add94c831c315b7c04de46cff8468 | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/5724b27d7287b0ab45bf761827d28b9fb09d0507 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/3b4b47c6e7b14117045a219ffb55ff760f1d3158 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/7dbdbfea8c6fecd384f6649372fb238d31b8f965 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/faa840690060f3ac79b424497e4db9fd37e3a75d | powerpc64 | host-gdb-11.2 | NOK | http://autobuild.buildroot.net/results/0565e2e83765fe3f46e33d27a1a901252c5e8f0b | ORPH arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/88f7c23c5158c6a86c680be19179f1d5eb4411e0 | ORPH powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/36f2cf3408937a4e99bad839dfc0d735773787f5 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/19f51b9e0a2cd2621231b9bf036a7396e8e51de1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6bee4746b469506cf535c76599beb31309a88062 | x86_64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/fa6e8c237c64b05cb5be5dff190afa2998a58d74 | arm | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/0884a5fb3d82f827213de77bf456b2ff5cf14497 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c743ca4421f377018782b6163dc2304d7eabde76 | aarch64_be | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/07cd0a5e8f2e83c5942d6cc3a1d0fa360f00810a | mips64 | host-protobuf-c-1.4.1 | NOK | http://autobuild.buildroot.net/results/3e489377da8be9d8068bf05d0469264f780d45bf | or1k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/9ef8e840b02a608f8433e08e723aef7bb0080228 | arceb | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/8dfbcd6b80240b00fc5d44d01a19bddd89afd778 | m68k | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/35d625b4c966dc9ed3946dada1f379b8175494f5 | mips64 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/31043a781b85068d6d2f3c729c6504e5cf35ad32 | sparc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/6580d2523420b6e5b25a716a0c268ffdf976b66c | powerpc64le | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/4a2a780bc0b38b272b1e3ae1cf08e0cceeae9dc4 | mips64el | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/22215a2beb0f99bb1b4d759299c4c98e6dd86ba3 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/8eda7f975b303326eaf0c9fb3e27f6237da57caa | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/8c2bca10e06aa84d268ce71333ab6ad1c1442fea | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/e86ef41b4cb381d0d296716e94fed0884f5976b5 | ORPH microblazeel | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/89377908f0cfc83462daabd944e79ebce5a68bd1 | s390x | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/45bebe20265f5fb6f84c3c8bfedb2e13617a77a2 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/97468cd4e682f8ccded7e026b8823fe57232e3d3 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e55bb7db9a1d13fecfa28a9c789dfaf26c44011a | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7608a05d969f0775e05466264e8b7f60548240d2 | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b63f811bb9c071ccbac1b9143694b732742ac94a | sh4a | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ae8134fc8179d078850464c77293ebaf00bd1c2c | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d940df1c4b4ee469752a7e6a8088ef980547bb8c | or1k | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/2f7ab080a4bb514f89193b81f390ad1c73d391bf | ORPH sparc64 | jhead-3.06.0.1 | NOK | http://autobuild.buildroot.net/results/3178de2f73c58b5e5c33eca0727702b7dad7e69a | ORPH riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/4adf3c105dbeb0644326d15225e3d94c217f0bf4 | mips64 | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/f4f65dbd210ca05bb4f5380e3f3c61359821e6c8 | riscv64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8cc34926c6266d94234c60149ca0c0678223245f | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/0a14e7920b9c377d8dea48893186a71d3f57b9f4 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/385d320965431aaf11ce564e517435c5696d57c9 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d10b280cdd27a453294e5382afeafc1542fa2838 | microblaze | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1050f9bd33ed688c8b88f8e30aebce9e9c89ed99 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/13a958ffe26c4de0f3c913a3d425e0409cea0575 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/4495b8d430c085a238b2d026ba705c02b589e564 | arm | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/6e7b3d1eaba53d86102be03f0e387e1a3b2b581e | mips64 | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/d5df5440ee47e9cf1a252493aa05ca0514bcef53 | ORPH sparc | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/aea45077c408a776fa56614535b597457862fabd | ORPH aarch64_be | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/343eeaa56842598c133fac5d239b2ec3a5a2a820 | ORPH m68k | libdnet-1.16.1 | NOK | http://autobuild.buildroot.net/results/e0d4bf9598f99f2be49716a5ca6bc8140507dbe8 | ORPH microblaze | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/2559a2408b1d7667ba4a1f7e5c7b59b67c0621d9 | sparc64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/2f93976bac947d2aadf742ff98dead5fbcbb7250 | armeb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/793e0c9c45935b238f022cacf319e7568b934a59 | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/0e479f90648f8527c65565fce83fd015d7c5d642 | ORPH or1k | libgeos-3.11.0 | NOK | http://autobuild.buildroot.net/results/4effc1ece7fad93f877da57fc5465b4e4aae8d2a | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1792f96288c90804446195805558bf712d1e4a30 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c802f43f1ad119a40fea941962a08bf2ab01cd69 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/daed23ea431589544f80212b546b8a97fd95ec34 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b7ec3bd46706348d9b5cf6711d880a77246ce5df | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6956aac37ea6e541a4ae10e3ceb2311cfe7e6e56 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/21de4a1e3807d10a7acfa0d78a8a20f2c8fad726 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/d05817086837a831f4c145221c6932dac40ace4d | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f2bf51938dcaa4d666053a4ec1e03ee6ef58d63e | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/3efb63819fe2a06d6ee6ca2516f7520f0ff486e9 | ORPH powerpc64le | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/d11924517ebf5e1321c25b087744392f4f08221a | ORPH microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c760eef1f27c79f14256f16c1df561585db7f81b | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b8e1f86197363231cd6152c88bacf97b10caa105 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1a6faa5b68e25b7e567581e06a25c1d1f7a2e064 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c8208cf000d530f0c112c2dd9ac2331aa47d96a0 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6425a34d7448a181a33672895496af4129c1905c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/94252cc588c0450408a7dde38dee7a835673bc84 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a615fe8dbabf631d0246401c85e9ea748a62944c | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d937ca56b04dc4a94c5dc0912f8132cd12b8616 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/93564ac1a44a556fed87e2e49e6da3b9d1e892ac | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/207dda914235ff80528b89589bbf1dc2387a024d | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/836a74b128cefb66158b99c23e9ff2bb0215531b | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8e8821555dbcb043f20a087d32a501df69d32e1e | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/adcc15f6f63985485f575460b56d2bbae6012a8e | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/dfb95cc5ea231650ff8a9b6feace9c4a213d0e16 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1068abc701bdabfe1ed1a2a995401cb5f7e9c80b | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7f8f0a45983416e5f2be04996df1d15af448cc98 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0fab09b8bd174a431fda0119e1f69134ce6ac287 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/744f0efbbd719aebc28dec352f1458f7fd69d538 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a7d1a8124512439254fabe9c7cfeaebf74bb92af | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5fc27b7396682853dff568ef13c33eebf76b7c2b | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3edd92edfa5abc0d6e094fd97df67d9d472c131d | s390x | libostree-2022.6 | NOK | http://autobuild.buildroot.net/results/5d95e1f7b61deef2d2b11a2005256b93aa1ced3f | powerpc64 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/16b12ac139f04afd95b9e291f5d183da668cbfbe | ORPH or1k | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/14ed49d25575f6b18ef55fba585d3094910a76f5 | ORPH arceb | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/33b3da8a2eb9d44a98f94a164a1c532c972ffddb | ORPH armeb | libxml2-2.10.2 | NOK | http://autobuild.buildroot.net/results/7f8afa1e12a1fbe53d945ae3ab3774281a491c5a | powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/284db159cdec75d5f36f1d5b3c9675a7a0525f06 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/478e807a667367b8d39f1aade09d963117593f8d | ORPH xtensa | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/85282c977b3034df8bf3a6f2cc98f93765772640 | ORPH microblazeel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/b90a180c2c8704dd9c69d47e09916061ebace6dd | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a69e94bef4cd044835d1cb9a5a4e8cf99e6916ae | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3f6678a942a32a033c2b257536b4e7bb3063ef1e | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bcbcd82623d496a3790c0b7f5c53f8ea93a64b94 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d53586179b98aa4b867f53259fe6791eac4bb8d4 | ORPH sparc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/534792f273a8092d8028ebe3c27be03c0218aa4d | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/175bd208fca11463ab725a2f93dc648d7c41fd0c | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f8441f070e49091c07d342f536d6837a42eb7510 | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/54a7f6ef2f2c074ca5b2481ec1ce0d8aedc1ac60 | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/20d26a5cbd3c602bb003aad32c941ec477fb703a | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d6876cce1cbe16d2822a64b02d7b6bf7fa940620 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/88680de17ae5607562503e894eb8b381185b255e | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/83bb72afb0eb07484ac7189cf644fa82cb144e67 | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/94be962ffe5ee0f282f12d06d1ecadc217724813 | ORPH xtensa | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/d52367f55d19c3b50844ab07f19b2024d4d21a8e | arceb | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/4351a58bb1b6ca428aff56b10ef7cc663fc51852 | or1k | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/5eab737e19d2a238de82d61e770407b061fd10ab | mips64el | mimic-1.1.0 | NOK | http://autobuild.buildroot.net/results/f88f3818f7eb345f870744e1f7f54da165c1298e | mips64el | moarvm-2022.06 | NOK | http://autobuild.buildroot.net/results/fadf7afdf7928ae7da702b1d1eb60dd358637a02 | sh4a | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/a186488ecd046cab3ba587ff4a12ce8ff983c809 | xtensa | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a33bc0a3f360714c820446480fd74cf861b7554e | ORPH sh4 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/dd873dae8ad6e04ea522643d6af8aaa404838d58 | ORPH or1k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/660554c5466c74efb5efcc4de17e5af31c9def9d | ORPH arceb | musepack-r475 | NOK | http://autobuild.buildroot.net/results/f36e5ccc3309ba45e8b326ae54f7bbfe41ac1adb | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a83b1a14a32b8afa4191de954da36db3b6f489e7 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/823d1a683b7509226ab1a6a2457696a23ea8438d | arm | mxs-bootlets-10.12.01 | NOK | http://autobuild.buildroot.net/results/0c91ac6a30b5114553820988b5d852769d7138b7 | ORPH powerpc64 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/ee67bba638858cf090aac0b295cb89e236b8645b | s390x | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/965e4f9e99f525669d8684c5aa75c013f0814200 | sparc | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/4bc065c9f83c5305232c99ced142ca906fe021fc | arm | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/709ab9d18cbbe7af81aac18c6e2dc01b430c25ed | sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4b91941c505ae9296f80e010ea9597b5be5bc4aa | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c52034d854b7fa4bf611ec975bb71128745612a9 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e67d91dcd40af15642d83da853e916f450cef68b | ORPH riscv64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/a33e37386d227777f69f3fb9d99fa988cf608798 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ba8f3082e074a91703802568f992e863e9743967 | ORPH mipsel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/14c42121577bd188831e8fe8d3d86ae25ce8e8d4 | ORPH arm | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/59902e15207a5051d6ce8a3b865f4ab4b3fc696c | ORPH sparc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/179fcf524cb1a679b278d01e4bae8dc1368dc831 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/25dc120adbab159ea9d421b79ae78d5669d99bf4 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/2d2990c93cabe9e36bb09f26dfad74aa2c659b2f | ORPH or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/3359e67d345ac608b8e344b730eb96924b058ebb | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/0cf3ffbecedc452f8d6dad51d85093926ab91d69 | ORPH aarch64_be | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/806b3b4368ae51d5a8e193a36102c2d4fcdc8e2f | aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/60bdecd0f3759c2e4cc391347c6423f13e2af89f | sparc | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/b2ce3088e1aa2a2fc7b760e3042f60b31afd69a9 | arceb | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/b07996dc095e012de819d6768b91468f2d03b68a | riscv64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/af92f15f61f03b5c934eac6bd97d03dbffa60532 | arm | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/3265b665e22883c95d1071c568f8bc0600328e2d | powerpc64le | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/8694cce57cf2f8dcced580ffe52111573e9a71c4 | sparc64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/5e5da157df8531e37827536e832fd98de26fa6a4 | nios2 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/58990fbb7cfe25a56abbe6fabf43c062b31decf7 | sparc64 | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/71d032e02970cfbed7eee1d8c4aac4b2ce77460f | ORPH i686 | portaudio-190700_20210406 | NOK | http://autobuild.buildroot.net/results/f4f79953d10ed127820003fdf4e0b064ead906ab | ORPH sh4eb | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/1be5f018082b1442876e053fdbbedd53833fcb64 | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/825f99fc51d1d8dc18af735e75d8a4606a2fca38 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/1a54538df3b2b36defa878f42d801873ea8d9cf8 | ORPH powerpc64 | python-greenlet-1.1.2 | NOK | http://autobuild.buildroot.net/results/b4287b4590a62d7dcbd23f48414ffd51c5fa1bcf | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/b5bc0644e132040cc9c374f6ec4a1f20d2fcfc2e | x86_64 | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/b02651bcc1ffd01e1dc118775eff70547245abcc | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/39cf727e1f6b93d2e0a3e46b37a30fb95778ad78 | mipsel | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/75c3eee4da408e202b99b479009c2f33bd5ff8dc | or1k | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/141ca9a77d5acd92b8cbe0ca84a811dde73e7335 | mips64el | refpolicy-2.20220106 | NOK | http://autobuild.buildroot.net/results/13f15f229b1bca684c84755d7e0501c68dd2c0b6 | sparc | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/550640296a92826f6f04d2344adde75c3025ea35 | mipsel | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/c617ae1c5f2f0754e77a4d2575138b3102df4268 | riscv64 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/2e09eaaff9c9fbf26e9f7d77b04c978fb6691e58 | ORPH mips64el | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/aa7cd8f1de98b0b203a98ee0db922d28bc2c9e39 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f070e85ab15343a56306ca294b9f591d113c3f3e | ORPH x86_64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/df70eeb89ba25dc975d928035c151ceb90ee8248 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ebf4c4bdb3c1bfabf8d3e9ceaa34f2b666d5a028 | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/10cd40618e4e41ea45a2e9abba56e2a1b0145ade | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/eef4af5f346261d9089c4b8047b76fe69222adc7 | ORPH arm | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/abf42d5afe25fb2ec967d0ff2c4b0d5a2f8f6bc9 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2d9c6836699f2ea40f069cb2d316ebf3bb252ac4 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/70ace42f0f74d0d582b057954332b5764d53db3f | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/ab0582e5c2c1fab9bbe506145fed689167f1d710 | ORPH mips64el | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7f88f4b70cd1bedb217eeff41aadc4205c55f6d4 | ORPH mipsel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/711d56560225d86fa253722ad40efa50da307d1b | ORPH m68k | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/465fd5a87e01a7db391fc42e58606a8a7e9fed17 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a019ed89d80cf6965b01bb6ab90fd1474d2aca87 | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/087d973909653860f1e3f64bbe0fadceb19cb171 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4fed79016e15cc80fdfc7b25c10355b987ac8ec3 | ORPH arc | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f9cb464d4cd1a9aa1af906c3cbb1cba7b8909063 | ORPH mips | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/331c311b35f4bc3a9a974e6c0fc1287c71b6923e | ORPH sparc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/7f0abfcc4370f84cc507f341646a8db1996299de | ORPH powerpc64le | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/3cab2b2e0c694a43b960c7e6b05f046e5af25db0 | ORPH sh4 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/86258830ae0ebacd40cce88b480da382d496e93b | ORPH x86_64 | spice-0.15.0 | NOK | http://autobuild.buildroot.net/results/273eadf9e49af55e0932a8293ca65762fb43114f | armeb | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/bd2d6413904a8be1085a165f092cbaabf6c0f0b8 | sparc64 | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/0bb069685d1d1f3604c07023f35c64b8adbc0e85 | mips64el | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/e745a2f2dfd8d06df5a0dcc4c6c69534f67c4989 | s390x | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/042b9933baec07475124e2e103d83ad69b245fd2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1434682911f27fca4ba77bf8a91630d392a7ab27 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/9a22059ebd2a89a103ef2c960353f80dbe5ad3f6 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/49c945a24b90f1b04a24b2b0d342ebef36f48041 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/840fc22d0a3073cfa23c7d1596bb80fdd8f6e747 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6b885410e7f663bd92e5cc6116edf8f352e2ad2c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/507c617c54b3aaa28ed4fb3135eae647dd52f2d6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/54b78b6baf8f1692f5b3e45b2445c1098e8af9a2 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/835cc6facebee721cff05c8e570b992924bd56e7 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4fafacc9312ac4546f3536af46f12fdc559f7729 | mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/425a8df3a8d83dc24f9f0906cabda68864eb1aeb | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cde5936275788113d3b12817f192b2b5e6aeba98 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c9c30183eb762966e4c1a1d03a7c2bc799bfc083 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a6bcb4308f18dc8272aa9087843cdfb5c1131016 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/84541dbdbe7dd0f082ff31f62f5f9172d0b01b16 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2554c34e8e3e94636e2285a3a2f784101c38fc5e | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/00ce3ebd308f48da4372b7f664a28de7d06489c7 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/98be4625075fa205ed6c28c9bdac4d39fb4da70a | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/50d277575b7047ac09d60305460a4ae47fddeeae | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fd9c7f52ea23bf362831d8bcddd846c28c398c2c | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3acf0bdf979ccbcdd5bb17e905fa76969801789b | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/e0941302b7b6d2bfc19c55097e8db5e033a7d808 | powerpc64le | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/87cfb25dacc68532dc1d542d33b654462a45c0c4 | mipsel | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7d13ee95a8ea0b8130769b8d5d74444360beff6b | sh4a | umtprd-1.6.2 | NOK | http://autobuild.buildroot.net/results/b65e2f76840b1ef7b1398b0e1e1e728ea657adf7 | mips | unknown | NOK | http://autobuild.buildroot.net/results/90505d075baafc3b57fb6a6a7bd26ff98f6d1969 | or1k | unknown | NOK | http://autobuild.buildroot.net/results/b2559aeecc8add076dbfa6bb321c9d6437dcc410 | aarch64 | unknown | NOK | http://autobuild.buildroot.net/results/45f7b431a038c065850495cd5012d209eba8f1eb | mips64 | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/6c60ce857d54e326ee2ffcf67ee176fc102b2d00 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4575498d4108cd2256ed798ddc7527d2c10d445f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/33823e6f9cd3c1466302f16a5b45fc3683b05560 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7a1836c5a13d3e5e317593c52de4bad974f16f79 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6f1a2f25cb8223c0faec228a160663fd5083896e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/14c3ed64bfbb1e96d0298ca2ae9f2e3d07c3c596 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/399a237d06e01c9332bd7e06612aa07aba7f534a | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/44ce7c0b0bf9b8dad435cf206b7dbe405dd9c968 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/5995456a1f4e0a303f4a10fa85de078ae479912d | ORPH mips64el | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/a2c066a4dc2c8b54ab0e17aac39bf1f2c957fc40 | powerpc64 | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/fbf194c242a648949c9043aed998d1387cd23c4e | aarch64 | zeromq-4.3.4 | NOK | http://autobuild.buildroot.net/results/df46cd40b3e30808ffc0bc4464c1d13c5fb079cb | Classification of failures by reason for 2022.02.x -------------------------------------------------- frr-8.1 | 1 igd2-for-linux-2.1 | 1 poppler-21.12.0 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | frr-8.1 | NOK | http://autobuild.buildroot.net/results/6f4f89587266afc8d90fd2c1b58a9f6017e00ad0 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1bf1724ee2537928bc24d3e4ef2f7e5d528bfeb3 | xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/c55dc9daa4ed9137e544a3f2373e2441f5c643b8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 3 host-rust-1.62.0 | 3 ding-libs-0.6.2 | 1 dmalloc-5.6.5 | 1 host-go-1.18.6 | 1 ntpsec-1_2_1 | 1 openssh-legal-info | 1 unknown | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | ding-libs-0.6.2 | NOK | http://autobuild.buildroot.net/results/98b4167a46c405b2988b20f37646d8d45c45850d | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/0b3be2087b4e6a77407ca662b6cca013800a41e6 | ORPH aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ae54578edd76c3ee9b1d623b0edc5eac4e0824d1 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/dd62547108b292e8fad7712d95edd99b6ca8b487 | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/018d74a5eaf825e2030b1bc7c331a5e3f75052a9 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/f0f412509d7d09d770f6dfcaa26107f0bf4a6ed1 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/aededc7ca86c01d8edc7ef5162c4b0c5820e515b | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a5657f692ed9b7308750b243f438a2ce5d24295e | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/b0015fc36797537af87d0eb01b6c5f47cc53a727 | microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/3a57d5ea32901832bb1ccaf78a72e4daed0a1ef1 | ORPH arc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4443ae93a17a38917d458e1d2ca56213ee4515d3 | ORPH microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/dbcf96949f641b97d3965d3b2963fecdee14d43b | mips64el | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/af2ad48c96aa5ecd9fe8d97c18466a288a203a8c | ORPH Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.1 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 19.6.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.0 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.64 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.64 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.64 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.7 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.6.3 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.1 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.2 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.0 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.18 | 20.10.19 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.10.0 | 2.11.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.18 | 20.10.19 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH easy-rsa | DISTRO | https://release-monitoring.org/project/17770 | 3.1.0 | 3.1.1 | edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.34 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.2 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.1 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.19.2 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.0 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | freeswitch | DISTRO | https://release-monitoring.org/project/21436 | 1.10.7 | 1.10.8 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.0 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.4.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.49.1 | 1.50.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.0 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 71-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-50 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-gmmlib | DISTRO | https://release-monitoring.org/project/20342 | 22.2.0 | 22.2.1 | intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.3 | 22.5.4 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.3 | 22.5.4 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | irssi | DISTRO | https://release-monitoring.org/project/01404 | 1.2.3 | 1.4.2 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.23.0 | 1.25.0 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.15-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.1 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdmtx | DISTRO | https://release-monitoring.org/project/12833 | 0.7.5 | 0.7.7 | libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.15 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libosip2 | DISTRO | https://release-monitoring.org/project/15135 | 5.3.0 | 5.3.1 | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libunistring | DISTRO | https://release-monitoring.org/project/01747 | 1.0 | 1.1 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libva | DISTRO | https://release-monitoring.org/project/01752 | 2.15.0 | 2.16.0 | libva-utils | DISTRO | https://release-monitoring.org/project/16334 | 2.15.0 | 2.16.0 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | libzlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | ORPH lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.2 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.1 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.64 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.1 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.1 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | minizip-zlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.4 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.41 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.1.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 0.23.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.218 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.0 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.1 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 18.11.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+19 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.64 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202207 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.41 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php | DISTRO | https://release-monitoring.org/project/03627 | 8.1.9 | 8.1.11 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pipewire | DISTRO | https://release-monitoring.org/project/57357 | 0.3.57 | 0.3.59 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.0 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.1.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.0 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.91 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.91 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.1 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-distro | DISTRO | https://release-monitoring.org/project/12202 | 1.7.0 | 1.8.0 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.6 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-login | DISTRO | https://release-monitoring.org/project/03868 | 0.6.1 | 0.6.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.37.4 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3.post0 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.5 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 8.14.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.1 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.10.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.7 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.2 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pydyf | DISTRO | https://release-monitoring.org/project/179112 | 0.3.0 | 0.5.0 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.9 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.5.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.4 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.2 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.9.10 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.1 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b1 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.4.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.1 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | python3 | DISTRO | https://release-monitoring.org/project/13254 | 3.10.7 | 3.10.8 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.1 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.6 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2208.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.0 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.0 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | sofia-sip | DISTRO | https://release-monitoring.org/project/10509 | 1.13.8 | 1.13.9 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | squashfs | DISTRO | https://release-monitoring.org/project/04879 | 4.5 | 4.5.1 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyssh | DISTRO | https://release-monitoring.org/project/14678 | 20210601 | 20220801 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.1 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftp | DISTRO | https://release-monitoring.org/project/21638 | 5.0 | 5.0.1 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbguard | DISTRO | https://release-monitoring.org/project/11151 | 1.1.1 | 1.1.2 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0709 | 9.0.0771 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vnstat | DISTRO | https://release-monitoring.org/project/07283 | 2.8 | 2.9 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.0 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.231 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 374 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zlog | DISTRO | https://release-monitoring.org/project/21624 | 1.2.15 | 1.2.16 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus | CVE-2022-42010 | https://security-tracker.debian.org/tracker/CVE-2022-42010 dbus | CVE-2022-42011 | https://security-tracker.debian.org/tracker/CVE-2022-42011 dbus | CVE-2022-42012 | https://security-tracker.debian.org/tracker/CVE-2022-42012 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freerdp | CVE-2022-39282 | https://security-tracker.debian.org/tracker/CVE-2022-39282 freerdp | CVE-2022-39283 | https://security-tracker.debian.org/tracker/CVE-2022-39283 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus | CVE-2022-42010 | https://security-tracker.debian.org/tracker/CVE-2022-42010 dbus | CVE-2022-42011 | https://security-tracker.debian.org/tracker/CVE-2022-42011 dbus | CVE-2022-42012 | https://security-tracker.debian.org/tracker/CVE-2022-42012 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 freerdp | CVE-2022-39282 | https://security-tracker.debian.org/tracker/CVE-2022-39282 freerdp | CVE-2022-39283 | https://security-tracker.debian.org/tracker/CVE-2022-39283 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From luca.ceresoli at bootlin.com Mon Oct 17 07:39:53 2022 From: luca.ceresoli at bootlin.com (luca.ceresoli at bootlin.com) Date: Mon, 17 Oct 2022 09:39:53 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package Message-ID: <20221017073953.510219-1-luca.ceresoli@bootlin.com> From: Luca Ceresoli This package fails building with a kernel >= 6.0 [0] due to internal API changes [1]: .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? 709 | roam_info.channel = notify_channel; | ^ ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? 710 | roam_info.bssid = cur_network->network.MacAddress; | ^ There is currently no fix in the github repository, and it's probably not worth fixing because, as the Config.in help text states: This is needed only for Linux kernels before 3.12. Since 3.12, there is a (staging) driver in mainline, with a similar codebase. Kernel 3.12 is 9 years old now, and the oldest kernel currently supported is 4.9. [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d Cc: TIAN Yuanhao Cc: Petr Vorel Cc: Peter Seiderer Cc: Heiko Thiery Cc: William Wennerstr?m Cc: Ezequiel Garcia Cc: Bernd Kuhls Signed-off-by: Luca Ceresoli --- DEVELOPERS | 1 - package/Config.in | 1 - package/rtl8188eu/Config.in | 21 --------------------- package/rtl8188eu/rtl8188eu.hash | 3 --- package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- 5 files changed, 54 deletions(-) delete mode 100644 package/rtl8188eu/Config.in delete mode 100644 package/rtl8188eu/rtl8188eu.hash delete mode 100644 package/rtl8188eu/rtl8188eu.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef3d..b1e84edd5e9a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1810,7 +1810,6 @@ F: package/agentpp/ F: package/exim/ F: package/libpjsip/ F: package/qpid-proton/ -F: package/rtl8188eu/ F: package/snmppp/ F: package/stm32flash/ F: package/unzip/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97d3..d95a6ac4e3fb 100644 --- a/package/Config.in +++ b/package/Config.in @@ -573,7 +573,6 @@ endmenu source "package/rpi-userland/Config.in" source "package/rs485conf/Config.in" source "package/rtc-tools/Config.in" - source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" source "package/rtl8723bu/Config.in" diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in deleted file mode 100644 index 76d90852976a..000000000000 --- a/package/rtl8188eu/Config.in +++ /dev/null @@ -1,21 +0,0 @@ -config BR2_PACKAGE_RTL8188EU - bool "rtl8188eu" - depends on !BR2_s390x - depends on BR2_LINUX_KERNEL - help - A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. - - Make sure your target kernel has the CONFIG_WIRELESS_EXT - config option enabled. - - Note: this package needs a firmware loading mechanism to load - the binary blob for the chip to work. - - https://github.com/lwfinger/rtl8188eu - -comment "rtl8188eu needs a Linux kernel to be built" - depends on !BR2_s390x - depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash deleted file mode 100644 index 9c7f2de4b61e..000000000000 --- a/package/rtl8188eu/rtl8188eu.hash +++ /dev/null @@ -1,3 +0,0 @@ -# Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk deleted file mode 100644 index ebce4617ac5c..000000000000 --- a/package/rtl8188eu/rtl8188eu.mk +++ /dev/null @@ -1,28 +0,0 @@ -################################################################################ -# -# rtl8188eu -# -################################################################################ - -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) -RTL8188EU_LICENSE_FILES = COPYING -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m - -define RTL8188EU_LINUX_CONFIG_FIXUPS - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) -endef - -define RTL8188EU_INSTALL_FIRMWARE - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin -endef -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE - -$(eval $(kernel-module)) -$(eval $(generic-package)) -- 2.34.1 From bugzilla at busybox.net Mon Oct 17 07:43:39 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 17 Oct 2022 07:43:39 +0000 Subject: [Buildroot] [Bug 15061] New: Node.js Package fails to build against musl i386 Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 Bug ID: 15061 Summary: Node.js Package fails to build against musl i386 Product: buildroot Version: 2022.08 Hardware: All OS: Linux Status: NEW Severity: normal Priority: P5 Component: Other Assignee: unassigned at buildroot.uclibc.org Reporter: hello.skyclo at gmail.com CC: buildroot at uclibc.org Target Milestone: --- Hello, I have been trying to build the Nodejs package against musl for a i386 Pentium3 target. Nodejs has an unofficial build for musl (x64) and for x86 (gcc), however there is no unofficial build for x86 musl. I assume it's possible to build against musl-i386. I built nodejs against uClibc-ng i386 on the exact same machine months ago, however now that doesn't work either. For reference, my system uses glibc x64 and does not contain a musl i386 linker (since Ubuntu no longer supports i386). The full output of make is attached here along with the defconfig (for reprod.): https://gist.github.com/Skyclo/4168deaa1a73be8574d43eb70a4d9de1 The ninja build seems to fail consistently when doing anything related to "obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h". It produces the following output before eventually crashing the make job queue: >> [218/2653] ACTION generate_bytecode_builtins_list: generate_bytecode_builtins_list_action_3931b343a4cb0bd98da4e581f6ce90fe >> FAILED: obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h >> cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h >> qemu-i386: Could not open '/lib/ld-musl-i386.so.1': No such file or directory Return code is 255 Getting the file info from "./output/target/lib/ld-musl-i386.so.1" returns the following: >> ./output/target/lib/ld-musl-i386.so.1: broken symbolic link to /lib/libc.so I'm unsure if that is what is causing my issues. From what I can tell, the qemu wrapper should be able to resolve that symlink to the one found under the target's lib. I do not believe that my issue is related to Bug 14936 nor Bug 14366. I have not had time to see if the patch available at https://patchwork.ozlabs.org/project/buildroot/patch/20220809075704.86472-4-ardeleanalex at gmail.com/ works for my specific case. Thanks for any help in advance! -- You are receiving this mail because: You are on the CC list for the bug. From andrea.ricchi at amarulasolutions.com Mon Oct 17 07:43:51 2022 From: andrea.ricchi at amarulasolutions.com (Andrea Ricchi) Date: Mon, 17 Oct 2022 09:43:51 +0200 Subject: [Buildroot] [PATCH v3] package/cutekeyboard: new package In-Reply-To: <20221016175025.22545-1-angelo@amarulasolutions.com> References: <20221016175025.22545-1-angelo@amarulasolutions.com> Message-ID: Acked-by: Andrea Ricchi On Sun, Oct 16, 2022 at 7:50 PM Angelo Compagnucci < angelo at amarulasolutions.com> wrote: > CuteKeyboard is a Qt virtual keyboard plugin for embedded applications > > Signed-off-by: Angelo Compagnucci > --- > v2: > * bump to verison v1.0.1 > v3: > * Adding me to developers file > > DEVELOPERS | 1 + > package/Config.in | 1 + > package/cutekeyboard/Config.in | 18 ++++++++++++++++++ > package/cutekeyboard/cutekeyboard.hash | 3 +++ > package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ > 5 files changed, 41 insertions(+) > create mode 100644 package/cutekeyboard/Config.in > create mode 100644 package/cutekeyboard/cutekeyboard.hash > create mode 100644 package/cutekeyboard/cutekeyboard.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..4640abe3b2 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -158,6 +158,7 @@ F: package/apparmor/ > F: package/corkscrew/ > F: package/cups/ > F: package/cups-filters/ > +F: package/cutekeyboard/ > F: package/fail2ban/ > F: package/grep/ > F: package/htpdate/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..f11210d313 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1522,6 +1522,7 @@ menu "Graphics" > source "package/cairo/Config.in" > source "package/cairomm/Config.in" > source "package/chipmunk/Config.in" > + source "package/cutekeyboard/Config.in" > source "package/exempi/Config.in" > source "package/exiv2/Config.in" > source "package/fltk/Config.in" > diff --git a/package/cutekeyboard/Config.in > b/package/cutekeyboard/Config.in > new file mode 100644 > index 0000000000..389c583313 > --- /dev/null > +++ b/package/cutekeyboard/Config.in > @@ -0,0 +1,18 @@ > +config BR2_PACKAGE_CUTEKEYBOARD > + bool "cutekeyboard" > + depends on BR2_PACKAGE_QT5DECLARATIVE > + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK > + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 > + help > + CuteKeyboard is a Qt virtual keyboard plugin for embedded > applications. > + > + https://amarula.github.io/cutekeyboard/ > + > +if BR2_PACKAGE_CUTEKEYBOARD > + > +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES > + bool "cutekeyboard example" > + help > + Compile also application example > + > +endif > diff --git a/package/cutekeyboard/cutekeyboard.hash > b/package/cutekeyboard/cutekeyboard.hash > new file mode 100644 > index 0000000000..4720d7ec40 > --- /dev/null > +++ b/package/cutekeyboard/cutekeyboard.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 1c7950d176678e82f99e8a6f67cac2e030f623f1ea40937f12c3dbdd6f0c701f > cutekeyboard-v1.0.1.tar.gz > +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d > LICENSE > diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/ > cutekeyboard.mk > new file mode 100644 > index 0000000000..b43595075a > --- /dev/null > +++ b/package/cutekeyboard/cutekeyboard.mk > @@ -0,0 +1,18 @@ > > +################################################################################ > +# > +# cutekeyboard > +# > > +################################################################################ > + > +CUTEKEYBOARD_VERSION = v1.0.1 > +CUTEKEYBOARD_SITE = $(call > github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) > +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 > +CUTEKEYBOARD_INSTALL_STAGING = YES > +CUTEKEYBOARD_LICENSE = MIT > +CUTEKEYBOARD_LICENSE_FILES = LICENSE > + > +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) > +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES > +endif > + > +$(eval $(qmake-package)) > -- > 2.34.1 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jesseevg at gmail.com Mon Oct 17 07:48:04 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Mon, 17 Oct 2022 09:48:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/qt6/qt6serialbus: new package Message-ID: <20221017074804.717851-1-jesseevg@gmail.com> The min. header check for canfd was also ported but to me it does not seems necessary anymore, though I can't say this for this sure, please feel free to drop these lines from this patch if that is the case. Signed-off-by: Jesse Van Gavere --- package/qt6/Config.in | 1 + package/qt6/qt6serialbus/Config.in | 14 ++++++++ package/qt6/qt6serialbus/qt6serialbus.hash | 11 +++++++ package/qt6/qt6serialbus/qt6serialbus.mk | 37 ++++++++++++++++++++++ 4 files changed, 63 insertions(+) create mode 100644 package/qt6/qt6serialbus/Config.in create mode 100644 package/qt6/qt6serialbus/qt6serialbus.hash create mode 100644 package/qt6/qt6serialbus/qt6serialbus.mk diff --git a/package/qt6/Config.in b/package/qt6/Config.in index 4b2b9a1174..b0cc008df5 100644 --- a/package/qt6/Config.in +++ b/package/qt6/Config.in @@ -39,6 +39,7 @@ menuconfig BR2_PACKAGE_QT6 if BR2_PACKAGE_QT6 source "package/qt6/qt6base/Config.in" +source "package/qt6/qt6serialbus/Config.in" source "package/qt6/qt6serialport/Config.in" endif diff --git a/package/qt6/qt6serialbus/Config.in b/package/qt6/qt6serialbus/Config.in new file mode 100644 index 0000000000..e0b2b937b3 --- /dev/null +++ b/package/qt6/qt6serialbus/Config.in @@ -0,0 +1,14 @@ +config BR2_PACKAGE_QT6SERIALBUS + bool "qt6serialbus" + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6 # CAN FD + select BR2_PACKAGE_QT6SERIALPORT + help + Qt is a cross-platform application and UI framework for + developers using C++. + + This package corresponds to the qt6serialbus module. + + https://doc.qt.io/qt-6/qtserialbus-index.html + +comment "qt6serialbus needs headers >= 3.6" + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6 diff --git a/package/qt6/qt6serialbus/qt6serialbus.hash b/package/qt6/qt6serialbus/qt6serialbus.hash new file mode 100644 index 0000000000..57b68f47e8 --- /dev/null +++ b/package/qt6/qt6serialbus/qt6serialbus.hash @@ -0,0 +1,11 @@ +# Downloaded from https://download.qt.io/archive/qt/6.4/6.4.0/submodules/qtserialbus-everywhere-src-6.4.0.tar.xz.sha256 +sha256 efca55677c12085a85b6c0e0f401332922ebc8226b18b7fc9bb9c0d48549ea91 qtserialbus-everywhere-src-6.4.0.tar.xz + +# Hashes for license files: +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce LICENSES/BSD-3-Clause.txt +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 LICENSES/GFDL-1.3-no-invariants-only.txt +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSES/GPL-2.0-only.txt +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSES/GPL-3.0-only.txt +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 LICENSES/LGPL-3.0-only.txt +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 LICENSES/LicenseRef-Qt-Commercial.txt +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 LICENSES/Qt-GPL-exception-1.0.txt diff --git a/package/qt6/qt6serialbus/qt6serialbus.mk b/package/qt6/qt6serialbus/qt6serialbus.mk new file mode 100644 index 0000000000..e7cd5b764a --- /dev/null +++ b/package/qt6/qt6serialbus/qt6serialbus.mk @@ -0,0 +1,37 @@ +################################################################################ +# +# qt6serialbus +# +################################################################################ + +QT6SERIALBUS_VERSION = $(QT6_VERSION) +QT6SERIALBUS_SITE = $(QT6_SITE) +QT6SERIALBUS_SOURCE = qtserialbus-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALBUS_VERSION).tar.xz +QT6SERIALBUS_INSTALL_STAGING = YES +QT6SERIALBUS_SUPPORTS_IN_SOURCE_BUILD = NO +QT6SERIALBUS_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0, GFDL-1.3 no invariants (docs) +QT6SERIALBUS_LICENSE_FILES = LICENSES/GPL-2.0-only.txt LICENSES/GPL-3.0-only.txt LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt + +QT6SERIALBUS_CONF_OPTS = \ + -GNinja \ + -DQT_HOST_PATH=$(HOST_DIR) \ + -DBUILD_WITH_PCH=OFF \ + -DQT_BUILD_EXAMPLES=OFF \ + -DQT_BUILD_TESTS=OFF + +QT6SERIALBUS_DEPENDENCIES = \ + qt6serialport + +define QT6SERIALBUS_BUILD_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --build $(QT6SERIALBUS_BUILDDIR) +endef + +define QT6SERIALBUS_INSTALL_STAGING_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --install $(QT6SERIALBUS_BUILDDIR) --prefix $(STAGING_DIR)/usr +endef + +define QT6SERIALBUS_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(BR2_CMAKE) --install $(QT6SERIALBUS_BUILDDIR) --prefix $(TARGET_DIR)/usr +endef + +$(eval $(cmake-package)) -- 2.34.1 From br015 at umbiko.net Mon Oct 17 08:20:41 2022 From: br015 at umbiko.net (Andreas Ziegler) Date: Mon, 17 Oct 2022 08:20:41 +0000 Subject: [Buildroot] Help with isolinux: "No DEFAULT or UI configuration directive found!" In-Reply-To: References: Message-ID: <001c74b1a3b54786f3d62bc18d53af5a@umbiko.net> Hello Sam, On 2022-10-17 18:15, samuel ammonius wrote: > Hello everybody, > > I don't know anything about embedded systems or bootloaders or most of > the > stuff involved with buildroot. I wanted to make an installer that could > be > burned to a USB to run a graphical app that depends on Qt. I have the > dependencies and filesystem all set up, but booting the generated > iso9660 > image gives me this message: > > Booting from DVD/CD... > > ISOLINUX 6.03 ETCD Copyright (C) 1994-2014 H. Peter Anvin et al > > No DFEAULT or UI configuration directive found! Check if you have a syslinux.cfg file where isolinux can find it. The root of the ISO image would be a possible location. This file contains the boot configuration: DEFAULT linux SAY Booting from DVD/CD... LABEL linux KERNEL bzImage APPEND quiet See [1] for detailed information. This config file is system specific and not supplied by Buildroot. It would be part of your BR2_ROOTFS_OVERLAY or generated from a BR2_ROOTFS_POST_BUILD_SCRIPT. You may also need the ldlinux.c32 module (BR2_TARGET_SYSLINUX_C32). > boot: _ > > > Typing anything into the "boot" prompt just repeats the same error > message. > Does anyone know how this problem could be fixed? Try entering 'KERNEL ' (relative to root of boot device) here. > --- > Thanks, > Sam Kind regards, Andreas [1] https://wiki.syslinux.org/wiki/index.php?title=Config From peter at korsgaard.com Mon Oct 17 08:34:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:14 +0200 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:09 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <87a65uc0hl.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force > ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively > disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is > set to 0 unconditionally in make_helpers/defaults.mk, overwriting any > environment set value. So we must pass ENABLE_STACK_PROTECTOR in > MAKE_OPTS for it to be effective. But to avoid said build failure we > can't pass ENABLE_STACK_PROTECTOR=0. > Only pass ENABLE_STACK_PROTECTOR when > BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for > the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. > Cc: Dick Olsson > Cc: Sergey Matyukevich > Signed-off-by: Baruch Siach Heh, I just spent some time investigating some ATF link failures for avenger96_defconfig after we moved to glibc by default (which enables SSP support) and got to the same conclusion ;) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:14 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:14 +0200 Subject: [Buildroot] [PATCH 1/3] boot/arm-trusted-firmware: fix SSP support In-Reply-To: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:09 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <87a65uc0hl.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force > ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively > disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is > set to 0 unconditionally in make_helpers/defaults.mk, overwriting any > environment set value. So we must pass ENABLE_STACK_PROTECTOR in > MAKE_OPTS for it to be effective. But to avoid said build failure we > can't pass ENABLE_STACK_PROTECTOR=0. > Only pass ENABLE_STACK_PROTECTOR when > BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for > the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. > Cc: Dick Olsson > Cc: Sergey Matyukevich > Signed-off-by: Baruch Siach Heh, I just spent some time investigating some ATF link failures for avenger96_defconfig after we moved to glibc by default (which enables SSP support) and got to the same conclusion ;) Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:20 +0200 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:10 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> Message-ID: <875ygic0hf.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > The Armada target does not provide platform level support for SSP. > Fixes link failure: > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > This error does not should up on CI jobs because SSP was effectively > always disabled until the previous commit. > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:20 +0200 Subject: [Buildroot] [PATCH 2/3] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP In-Reply-To: <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:10 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> <662b275967464a67a9d63efdfb0257094b16c111.1665496931.git.baruch@tkos.co.il> Message-ID: <875ygic0hf.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > The Armada target does not provide platform level support for SSP. > Fixes link failure: > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > This error does not should up on CI jobs because SSP was effectively > always disabled until the previous commit. > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:25 +0200 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:11 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <871qr6c0ha.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Add a patch to disable SSP. The toolchain enables SSP by default when > one of BR2_SSP_ options is enabled. But ATF code for the Marvell > platform does not provide the required low level routines. This leads to > link time failure. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:34:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:34:25 +0200 Subject: [Buildroot] [PATCH 3/3] boot/mv-ddr-marvell: disable SSP In-Reply-To: (Baruch Siach via buildroot's message of "Tue, 11 Oct 2022 17:02:11 +0300") References: <96728725434424ecdff6a4087126c9d665c877ec.1665496931.git.baruch@tkos.co.il> Message-ID: <871qr6c0ha.fsf@dell.be.48ers.dk> >>>>> "Baruch" == Baruch Siach via buildroot writes: > Add a patch to disable SSP. The toolchain enables SSP by default when > one of BR2_SSP_ options is enabled. But ATF code for the Marvell > platform does not provide the required low level routines. This leads to > link time failure. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 > Signed-off-by: Baruch Siach Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:35:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/ffmpeg: bump version to 4.4.3 In-Reply-To: <20221016152034.1161161-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:20:34 +0200") References: <20221016152034.1161161-1-bernd.kuhls@t-online.de> Message-ID: <87wn8yalve.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Changelog: > http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:35:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:47 +0200 Subject: [Buildroot] [PATCH 1/2] package/sofia-sip: bump version to 1.13.9 In-Reply-To: <20221016152939.1162118-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:29:38 +0200") References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> Message-ID: <87sfjmaluk.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:37:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:18 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 In-Reply-To: <20221016155252.1723048-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:52:52 +0200") References: <20221016155252.1723048-1-bernd.kuhls@t-online.de> Message-ID: <87k04yals1.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Fixes > - CVE-2022-31628: http://bugs.php.net/81726 > - CVE-2022-31629: http://bugs.php.net/81727 > Signed-off-by: Bernd Kuhls Committed, thanks. Is there a similar fix for the 8.0.x branch for 2022.02.x? -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:36:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:36:27 +0200 Subject: [Buildroot] [PATCH 2/2] package/freeswitch: bump version to 1.10.8 In-Reply-To: <20221016152939.1162118-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:29:39 +0200") References: <20221016152939.1162118-1-bernd.kuhls@t-online.de> <20221016152939.1162118-2-bernd.kuhls@t-online.de> Message-ID: <87o7uaaltg.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: > https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 > Removed two patches which are included in upstream release, > renumbered remaining patch. > Removed libs/apr-util/LICENSE due to upstream removal of bundled > apr-util package. > Added fix to disable pcap detection, otherwise /usr/bin/pcap-config > can be picked-up which breaks building freeswitch. > Signed-off-by: Bernd Kuhls > --- Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:37:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/dhcp: security bump to version 4.4.3-P1 In-Reply-To: <20221016210931.54469-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 23:09:31 +0200") References: <20221016210931.54469-1-fontaine.fabrice@gmail.com> Message-ID: <87fsfmalqw.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Corrected a reference count leak that occurs when the server builds > responses to leasequery packets. Thanks to VictorV of Cyber Kunlun > Lab for reporting the issue. > [Gitlab #253] > CVE: CVE-2022-2928 > - Corrected a memory leak that occurs when unpacking a packet that has an > FQDN option (81) that contains a label with length greater than 63 bytes. > Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. > [Gitlab #254] > CVE: CVE-2022-2929 > https://kb.isc.org/docs/cve-2022-2928 > https://kb.isc.org/docs/cve-2022-2929 > https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:38:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:38:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/libosip2: security bump to version 5.3.1 In-Reply-To: <20221016205254.13656-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 22:52:54 +0200") References: <20221016205254.13656-1-fontaine.fabrice@gmail.com> Message-ID: <87bkqaalqf.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer > overflow via the component osip_body_parse_header. > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 08:30:08 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:30:08 +0200 Subject: [Buildroot] [git commit] boot/arm-trusted-firmware: fix SSP support Message-ID: <20221017083837.84E3586DEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=09acc7cbc91f50305730ca0690a58fb93529034b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is set to 0 unconditionally in make_helpers/defaults.mk, overwriting any environment set value. So we must pass ENABLE_STACK_PROTECTOR in MAKE_OPTS for it to be effective. But to avoid said build failure we can't pass ENABLE_STACK_PROTECTOR=0. Only pass ENABLE_STACK_PROTECTOR when BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused. Cc: Dick Olsson Cc: Sergey Matyukevich Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- boot/arm-trusted-firmware/Config.in | 4 ---- boot/arm-trusted-firmware/arm-trusted-firmware.mk | 8 ++++++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index aa571502b3..5070849d9b 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -226,10 +226,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL string - # While newer versions of TF-A support "none" as - # ENABLE_STACK_PROTECTOR value, older versions (e.g 2.0) only - # supported "0" to disable SSP. - default "0" if !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP default "default" if BR2_SSP_REGULAR default "strong" if BR2_SSP_STRONG default "all" if BR2_SSP_ALL diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 246c0699bb..34d7d80243 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -64,10 +64,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM) \ TARGET_BOARD=$(ARM_TRUSTED_FIRMWARE_TARGET_BOARD) +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ + ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) +endif + ARM_TRUSTED_FIRMWARE_MAKE_ENV += \ $(TARGET_MAKE_ENV) \ - $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") \ - ENABLE_STACK_PROTECTOR=$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_LEVEL)) + $(if $(BR2_PIC_PIE),CFLAGS="-fno-PIE") ifeq ($(BR2_ARM_CPU_ARMV7A),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += ARM_ARCH_MAJOR=7 From peter at korsgaard.com Mon Oct 17 08:31:55 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:31:55 +0200 Subject: [Buildroot] [git commit] configs/solidrun_{macchiatobin, clearfog_gt_8k}: disable SSP Message-ID: <20221017083837.8DA0B86DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9883ff708e300b93247b4463dc7dcf1681c32354 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The Armada target does not provide platform level support for SSP. Fixes link failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' This error does not show up on CI jobs because SSP was effectively always disabled until the previous commit. Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- configs/solidrun_clearfog_gt_8k_defconfig | 1 + configs/solidrun_macchiatobin_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/solidrun_clearfog_gt_8k_defconfig b/configs/solidrun_clearfog_gt_8k_defconfig index bec4a7dacc..30b1e17925 100644 --- a/configs/solidrun_clearfog_gt_8k_defconfig +++ b/configs/solidrun_clearfog_gt_8k_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y diff --git a/configs/solidrun_macchiatobin_defconfig b/configs/solidrun_macchiatobin_defconfig index 7d06313b03..f388e37163 100644 --- a/configs/solidrun_macchiatobin_defconfig +++ b/configs/solidrun_macchiatobin_defconfig @@ -12,6 +12,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="mrvl_flash" BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0" +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_BINARIES_MARVELL=y BR2_TARGET_MV_DDR_MARVELL=y From peter at korsgaard.com Mon Oct 17 08:35:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:37 +0200 Subject: [Buildroot] [git commit] package/sofia-sip: bump version to 1.13.9 Message-ID: <20221017083837.AC17886E13@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c33056fff080dd1795bcfb543b87e7b70ac455c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/sofia-sip/sofia-sip.hash | 2 +- package/sofia-sip/sofia-sip.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sofia-sip/sofia-sip.hash b/package/sofia-sip/sofia-sip.hash index ae2b3e725c..776136bb15 100644 --- a/package/sofia-sip/sofia-sip.hash +++ b/package/sofia-sip/sofia-sip.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 ebd006a98a7dff6e7f4d8357c5ebeee1d3bee3ac29ff213a4909e845f230fcbe sofia-sip-1.13.8-756ab9b5c9.tar.gz +sha256 daf75c41408c559c2d58a8fd4d39be4a8ff5144bc1db220d4dbc28deeed6670a sofia-sip-1.13.9-f6ee306084.tar.gz sha256 e1c0890440efe31b6cd2ee2abf895eb917c787799f079133f5809414d90d5d60 COPYING sha256 b402ae58cf355b33be8fa023f704a039e3d41ecaccd2bbcda43ca31d703e4556 COPYRIGHTS diff --git a/package/sofia-sip/sofia-sip.mk b/package/sofia-sip/sofia-sip.mk index 80e59057c4..9071d964e4 100644 --- a/package/sofia-sip/sofia-sip.mk +++ b/package/sofia-sip/sofia-sip.mk @@ -4,8 +4,8 @@ # ################################################################################ -SOFIA_SIP_VERSION = 1.13.8 -SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-756ab9b5c9.tar.gz +SOFIA_SIP_VERSION = 1.13.9 +SOFIA_SIP_SOURCE = sofia-sip-$(SOFIA_SIP_VERSION)-f6ee306084.tar.gz SOFIA_SIP_SITE = https://files.freeswitch.org/downloads/libs/sofia-sip SOFIA_SIP_INSTALL_STAGING = YES SOFIA_SIP_DEPENDENCIES = host-pkgconf From peter at korsgaard.com Mon Oct 17 08:32:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:32:18 +0200 Subject: [Buildroot] [git commit] boot/mv-ddr-marvell: disable SSP Message-ID: <20221017083837.996DF86DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=42d66f8fc6d4836dc08f0c75c93ce4ed35b13eee branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch to disable SSP. The toolchain enables SSP by default when one of BR2_SSP_ options is enabled. But ATF code for the Marvell platform does not provide the required low level routines. This leads to link time failure. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3101770000 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134230006 Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- .../0001-Makefile-disable-stack-protection.patch | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch new file mode 100644 index 0000000000..62b1000727 --- /dev/null +++ b/boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch @@ -0,0 +1,34 @@ +From 53e34e3bff26fcbb7cc14178fa9fc80e7a73d556 Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 11 Oct 2022 16:34:44 +0300 +Subject: [PATCH] Makefile: disable stack protection + +The Buildroot toolchain might enable stack protection by default. That +breaks linking because ATF does not provide the required __stack_chk +routines. + +The mv-ddr-marvell Makefile provides no way to add custom CFLAGS. Patch +Makefile to disable stack protection. + +Signed-off-by: Baruch Siach +--- +Upstream status: not applicable; Buildroot specific +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index 3f0dd89a7381..feae75cc16e4 100644 +--- a/Makefile ++++ b/Makefile +@@ -331,6 +331,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT) + CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4 + CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc + CFLAGS += -march=armv8-a -fpie ++CFLAGS += -fno-stack-protector + + # PLATFORM is set in ble/ble.mk + ifneq ($(findstring a80x0,$(PLATFORM)),) +-- +2.35.1 + From peter at korsgaard.com Mon Oct 17 08:38:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:38:11 +0200 Subject: [Buildroot] [git commit] package/libosip2: security bump to version 5.3.1 Message-ID: <20221017083837.F14DD86E08@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4e6cede090f0ad129469d9cd621cdf74d578712d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer overflow via the component osip_body_parse_header. Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libosip2/libosip2.hash | 2 +- package/libosip2/libosip2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libosip2/libosip2.hash b/package/libosip2/libosip2.hash index 071ad7e61a..a563f0c4cd 100644 --- a/package/libosip2/libosip2.hash +++ b/package/libosip2/libosip2.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -sha256 f4725916c22cf514969efb15c3c207233d64739383f7d42956038b78f6cae8c8 libosip2-5.3.0.tar.gz +sha256 fe82fe841608266ac15a5c1118216da00c554d5006e2875a8ac3752b1e6adc79 libosip2-5.3.1.tar.gz # Hash for license file: sha256 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de COPYING diff --git a/package/libosip2/libosip2.mk b/package/libosip2/libosip2.mk index 2f9b7a9242..618d98a85c 100644 --- a/package/libosip2/libosip2.mk +++ b/package/libosip2/libosip2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBOSIP2_VERSION = 5.3.0 +LIBOSIP2_VERSION = 5.3.1 LIBOSIP2_SITE = $(BR2_GNU_MIRROR)/osip LIBOSIP2_INSTALL_STAGING = YES LIBOSIP2_LICENSE = LGPL-2.1+ From peter at korsgaard.com Mon Oct 17 08:37:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:37:50 +0200 Subject: [Buildroot] [git commit] package/dhcp: security bump to version 4.4.3-P1 Message-ID: <20221017083837.E89C086DF9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=99a570ee2b1368ca8b2be36c496bbe71224679ad branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Corrected a reference count leak that occurs when the server builds responses to leasequery packets. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #253] CVE: CVE-2022-2928 - Corrected a memory leak that occurs when unpacking a packet that has an FQDN option (81) that contains a label with length greater than 63 bytes. Thanks to VictorV of Cyber Kunlun Lab for reporting the issue. [Gitlab #254] CVE: CVE-2022-2929 https://kb.isc.org/docs/cve-2022-2928 https://kb.isc.org/docs/cve-2022-2929 https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1-RELNOTES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dhcp/dhcp.hash | 4 ++-- package/dhcp/dhcp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dhcp/dhcp.hash b/package/dhcp/dhcp.hash index be03423db8..7dd80a7acc 100644 --- a/package/dhcp/dhcp.hash +++ b/package/dhcp/dhcp.hash @@ -1,4 +1,4 @@ -# Verified from https://ftp.isc.org/isc/dhcp/4.4.3/dhcp-4.4.3.tar.gz.sha256.asc -sha256 0e3ec6b4c2a05ec0148874bcd999a66d05518378d77421f607fb0bc9d0135818 dhcp-4.4.3.tar.gz +# Verified from https://ftp.isc.org/isc/dhcp/4.4.3-P1/dhcp-4.4.3-P1.tar.gz.sha256.asc +sha256 0ac416bb55997ca8632174fd10737fd61cdb8dba2752160a335775bc21dc73c7 dhcp-4.4.3-P1.tar.gz # Locally calculated sha256 45a39c430be0920cb9570f34b32d2378fe6048c034f2f3265b9326d64ada73df LICENSE diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk index 183c8322d6..7be40191c8 100644 --- a/package/dhcp/dhcp.mk +++ b/package/dhcp/dhcp.mk @@ -4,7 +4,7 @@ # ################################################################################ -DHCP_VERSION = 4.4.3 +DHCP_VERSION = 4.4.3-P1 DHCP_SITE = https://ftp.isc.org/isc/dhcp/$(DHCP_VERSION) DHCP_INSTALL_STAGING = YES DHCP_LICENSE = MPL-2.0 From peter at korsgaard.com Mon Oct 17 08:36:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:36:58 +0200 Subject: [Buildroot] [git commit] package/php: security bump version to 8.1.11 Message-ID: <20221017083837.DD6C186DF8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1684cd72b0557444ee80195b60c5ab57ff6b1313 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: http://bugs.php.net/81727 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 5fb373ec11..c4c42a2c7d 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 53477e73e6254dc942b68913a58d815ffdbf6946baf61a1f8ef854de524c27bf php-8.1.9.tar.xz +sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 77584813c3..7136fd9744 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.9 +PHP_VERSION = 8.1.11 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From peter at korsgaard.com Mon Oct 17 08:35:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:11 +0200 Subject: [Buildroot] [git commit] package/ffmpeg: bump version to 4.4.3 Message-ID: <20221017083837.A34EE86E08@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=529203635159f224a0de1a5f3a9fb11bbba46644 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;hb=refs/heads/release/4.4 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/ffmpeg/ffmpeg.hash | 2 +- package/ffmpeg/ffmpeg.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ffmpeg/ffmpeg.hash b/package/ffmpeg/ffmpeg.hash index 8669a060d0..c9d7ea7c41 100644 --- a/package/ffmpeg/ffmpeg.hash +++ b/package/ffmpeg/ffmpeg.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 af419a7f88adbc56c758ab19b4c708afbcae15ef09606b82b855291f6a6faa93 ffmpeg-4.4.2.tar.xz +sha256 6c5b6c195e61534766a0b5fe16acc919170c883362612816d0a1c7f4f947006e ffmpeg-4.4.3.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPLv2 sha256 b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe COPYING.LGPLv2.1 sha256 cb48bf09a11f5fb576cddb0431c8f5ed0a60157a9ec942adffc13907cbe083f2 LICENSE.md diff --git a/package/ffmpeg/ffmpeg.mk b/package/ffmpeg/ffmpeg.mk index ced5ce598f..136e3e24ca 100644 --- a/package/ffmpeg/ffmpeg.mk +++ b/package/ffmpeg/ffmpeg.mk @@ -4,7 +4,7 @@ # ################################################################################ -FFMPEG_VERSION = 4.4.2 +FFMPEG_VERSION = 4.4.3 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.xz FFMPEG_SITE = http://ffmpeg.org/releases FFMPEG_INSTALL_STAGING = YES From peter at korsgaard.com Mon Oct 17 08:35:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 10:35:44 +0200 Subject: [Buildroot] [git commit] package/freeswitch: bump version to 1.10.8 Message-ID: <20221017083837.D26BC86DEE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1b8230ab648ec33b93ff29a6c1ed5b327d36c7dd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://github.com/signalwire/freeswitch/releases/tag/v1.10.8 Removed two patches which are included in upstream release, renumbered remaining patch. Removed libs/apr-util/LICENSE due to upstream removal of bundled apr-util package. Added fix to disable pcap detection, otherwise /usr/bin/pcap-config can be picked-up which breaks building freeswitch. Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch | 26 ----- ...ypto-hash-hmac_ossl.c-fix-build-with-lib.patch} | 0 .../freeswitch/0002-core-fix--disable-libyuv.patch | 129 --------------------- package/freeswitch/freeswitch.hash | 5 +- package/freeswitch/freeswitch.mk | 9 +- 5 files changed, 8 insertions(+), 161 deletions(-) diff --git a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch b/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch deleted file mode 100644 index 57f6e660c1..0000000000 --- a/package/freeswitch/0001-fix-build-SWITCH_BYTE_ORDER-__BIG_ENDIAN.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 68039d344d8e826e8b403c9cd0284fd07b4495ac Mon Sep 17 00:00:00 2001 -From: Dragos Oancea -Date: Tue, 26 Oct 2021 08:42:58 +0000 -Subject: [PATCH] [core] fix build SWITCH_BYTE_ORDER == __BIG_ENDIAN - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/68039d344d8e826e8b403c9cd0284fd07b4495ac - -Signed-off-by: Bernd Kuhls ---- - src/switch_rtp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/switch_rtp.c b/src/switch_rtp.c -index 1880bbb19c..843ee81381 100644 ---- a/src/switch_rtp.c -+++ b/src/switch_rtp.c -@@ -2155,7 +2155,7 @@ static void switch_send_rtcp_event(switch_rtp_t *rtp_session ,struct switch_rtcp - switch_event_add_header_string(event, SWITCH_STACK_BOTTOM, header, value); - snprintf(header, sizeof(header), "Source-Lost"); - #if SWITCH_BYTE_ORDER == __BIG_ENDIAN -- tmpLost = report->lost; /* signed 24bit will extended signess to int32_t automatically */ -+ tmpLost = rtcp_report_block->lost; /* signed 24bit will extended signess to int32_t automatically */ - #else - tmpLost = ntohl(rtcp_report_block->lost)>>8; - tmpLost = tmpLost | ((tmpLost & 0x00800000) ? 0xff000000 : 0x00000000); /* ...and signess compensation */ diff --git a/package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch b/package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch similarity index 100% rename from package/freeswitch/0003-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch rename to package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch diff --git a/package/freeswitch/0002-core-fix--disable-libyuv.patch b/package/freeswitch/0002-core-fix--disable-libyuv.patch deleted file mode 100644 index 137cb27cf8..0000000000 --- a/package/freeswitch/0002-core-fix--disable-libyuv.patch +++ /dev/null @@ -1,129 +0,0 @@ -From a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 Mon Sep 17 00:00:00 2001 -From: Sebastian Kemper -Date: Mon, 1 Nov 2021 09:59:09 +0100 -Subject: [PATCH] [core] fix "--disable-libyuv" - -Recent changes made it impossible to compile freeswitch without libyuv -support. - -src/switch_core_video.c: In function 'switch_img_read_from_file': -src/switch_core_video.c:3139:4: error: implicit declaration of function 'RAWToI420' [-Werror=implicit-function-declaration] -RAWToI420(data, width * 3, -^ -src/switch_core_video.c:3148:4: error: implicit declaration of function 'ABGRToARGB' [-Werror=implicit-function-declaration] -ABGRToARGB(data, width * 4, img->planes[SWITCH_PLANE_PACKED], img->stride[SWITCH_PLANE_PACKED], width, height); -^ - -Fix this my adding/moving the checks for "SWITCH_HAVE_YUV". - -Downloaded from upstream commit: -https://github.com/signalwire/freeswitch/commit/a2ce46c6fde38d6ac54a8a2ee1a5b391e2ed2071 - -Signed-off-by: Bernd Kuhls -Signed-off-by: Sebastian Kemper ---- - src/switch_core_video.c | 12 ++++++++++++ - tests/unit/switch_core_video.c | 4 ++++ - 2 files changed, 16 insertions(+) - -diff --git a/src/switch_core_video.c b/src/switch_core_video.c -index 7dbd685d6ee..0d377f9c3e4 100644 ---- a/src/switch_core_video.c -+++ b/src/switch_core_video.c -@@ -3116,6 +3116,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url_png(switch_image_t *img, cha - - SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name, switch_img_fmt_t img_fmt) - { -+#ifdef SWITCH_HAVE_YUV - int width = 0, height = 0, channels = 0; - int comp = STBI_rgb; - unsigned char *data = NULL; -@@ -3155,12 +3156,16 @@ SWITCH_DECLARE(switch_image_t *) switch_img_read_from_file(const char* file_name - } else if (data) { - stbi_image_free(data); - } -+#endif - - return NULL; - } - - SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, const char* file_name, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - const char *ext = strrchr(file_name, '.'); -@@ -3217,6 +3222,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_write_to_file(switch_image_t *img, co - free(data); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif - } - - typedef struct data_url_context_s { -@@ -3224,14 +3230,19 @@ typedef struct data_url_context_s { - char **urlP; - } data_url_context_t; - -+#ifdef SWITCH_HAVE_YUV - static void data_url_write_func(void *context, void *data, int size) - { - switch_buffer_t *buffer = (switch_buffer_t *)context; - switch_buffer_write(buffer, data, size); - } -+#endif - - SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char **urlP, const char *type, int quality) - { -+#ifndef SWITCH_HAVE_YUV -+ return SWITCH_STATUS_FALSE; -+#else - int comp = STBI_rgb; - unsigned char *data = NULL; - int stride_in_bytes = 0; -@@ -3300,6 +3311,7 @@ SWITCH_DECLARE(switch_status_t) switch_img_data_url(switch_image_t *img, char ** - switch_buffer_destroy(&buffer); - - return ret ? SWITCH_STATUS_SUCCESS : SWITCH_STATUS_FALSE; -+#endif /* SWITCH_HAVE_YUV */ - } - - -diff --git a/tests/unit/switch_core_video.c b/tests/unit/switch_core_video.c -index 27c96102929..e395db474d5 100644 ---- a/tests/unit/switch_core_video.c -+++ b/tests/unit/switch_core_video.c -@@ -48,6 +48,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEARDOWN_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(data_url_test) - { - char *data_url = NULL; -@@ -88,6 +89,7 @@ FST_CORE_BEGIN("./conf") - unlink(argb_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - - FST_TEST_BEGIN(img_patch) - { -@@ -239,6 +241,7 @@ FST_CORE_BEGIN("./conf") - } - FST_TEST_END() - -+#ifdef SWITCH_HAVE_YUV - FST_TEST_BEGIN(stb_data_url) - { - switch_image_t *img = switch_img_alloc(NULL, SWITCH_IMG_FMT_I420, 120, 60, 1); -@@ -321,6 +324,7 @@ FST_CORE_BEGIN("./conf") - unlink(jpg_write_filename); - } - FST_TEST_END() -+#endif /* SWITCH_HAVE_YUV */ - } - FST_SUITE_END() - } diff --git a/package/freeswitch/freeswitch.hash b/package/freeswitch/freeswitch.hash index 8066c620c4..18a36ff23c 100644 --- a/package/freeswitch/freeswitch.hash +++ b/package/freeswitch/freeswitch.hash @@ -1,10 +1,9 @@ -# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.7.-release.tar.xz.sha256 -sha256 0919bddc2ea9cab2e4944314e71637bea9dd4f40d510722a74ea032104594c41 freeswitch-1.10.7.-release.tar.xz +# From https://files.freeswitch.org/freeswitch-releases/freeswitch-1.10.8.-release.tar.xz.sha256 +sha256 1176b26b2f463de2980e5be953f81ced94d23c784452bd41e086d3933a88be5f freeswitch-1.10.8.-release.tar.xz # Locally computed sha256 75c933202f40939cdc3827fce20a1efdaa38291e2b5a65d234eb16e2cffda66a COPYING sha256 c3e3388768dae8bf4edcc4108f95be815b8a05c0b0aef6e4c3d8df81affdfa34 docs/OPENH264_BINARY_LICENSE.txt sha256 e8e26b16da14aa3e6ed5c22c705fdc1f45d6225fca461ea9f7314bcdfdc414c4 libs/apr/LICENSE -sha256 1eefb2ea1db0af7729a9d8a27d7c65d8a37ab185393f935b029aac6828ce315a libs/apr-util/LICENSE sha256 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615 libs/libvpx/LICENSE sha256 2b2cc1180c7e6988328ad2033b04b80117419db9c4c584918bbb3cfec7e9364f libs/libyuv/LICENSE sha256 7d72a8aee2c4b1a084200487992a5d86f5df6b535727a14c1874918e99d24600 libs/libzrtp/src/zrtp_legal.c diff --git a/package/freeswitch/freeswitch.mk b/package/freeswitch/freeswitch.mk index 24c1ee4dd4..6234dd8e97 100644 --- a/package/freeswitch/freeswitch.mk +++ b/package/freeswitch/freeswitch.mk @@ -4,20 +4,19 @@ # ################################################################################ -FREESWITCH_VERSION = 1.10.7 +FREESWITCH_VERSION = 1.10.8 FREESWITCH_SOURCE = freeswitch-$(FREESWITCH_VERSION).-release.tar.xz FREESWITCH_SITE = https://files.freeswitch.org/freeswitch-releases # External modules need headers/libs from staging FREESWITCH_INSTALL_STAGING = YES FREESWITCH_LICENSE = MPL-1.1, \ GPL-3.0+ with font exception (fonts), \ - Apache-2.0 (apr, apr-util), \ + Apache-2.0 (apr), \ BSD-3-Clause (libsrtp) FREESWITCH_LICENSE_FILES = \ COPYING \ libs/apr/LICENSE \ - libs/apr-util/LICENSE \ libs/srtp/LICENSE FREESWITCH_CPE_ID_VENDOR = freeswitch @@ -50,6 +49,10 @@ FREESWITCH_CONF_ENV += \ ac_cv_prog_PHP_CONFIG=false \ ac_cv_have_php_config=no +# disable pcap detection, pcap is an optional dependency for unit tests +FREESWITCH_CONF_ENV += \ + ac_cv_prog_HAVE_PCAP_CONFIG=false + # copied from freeswitch/configure.ac, line 258+ FREESWITCH_CONF_ENV += \ ac_cv_file__dev_ptmx=yes \ From sebastien.szymanski at armadeus.com Mon Oct 17 09:05:04 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Mon, 17 Oct 2022 11:05:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-login: bump to version 0.6.2 Message-ID: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/python-flask-login/python-flask-login.hash | 4 ++-- package/python-flask-login/python-flask-login.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-login/python-flask-login.hash b/package/python-flask-login/python-flask-login.hash index d11e37cce8..c88b70f2d5 100644 --- a/package/python-flask-login/python-flask-login.hash +++ b/package/python-flask-login/python-flask-login.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/flask-login/json -md5 0a1576eab473c2a8bb576348333d5ef5 Flask-Login-0.6.1.tar.gz -sha256 1306d474a270a036d6fd14f45640c4d77355e4f1c67ca4331b372d3448997b8c Flask-Login-0.6.1.tar.gz +md5 8020b22ad7ec6f17034f90117a520633 Flask-Login-0.6.2.tar.gz +sha256 c0a7baa9fdc448cdd3dd6f0939df72eec5177b2f7abe6cb82fc934d29caac9c3 Flask-Login-0.6.2.tar.gz # Locally computed sha256 checksums sha256 7a9dfb9c5da204ed1370f3b62c13e2992a12da1da707f47e156897eeb4344e5b LICENSE diff --git a/package/python-flask-login/python-flask-login.mk b/package/python-flask-login/python-flask-login.mk index 9a11fde542..394fe197e3 100644 --- a/package/python-flask-login/python-flask-login.mk +++ b/package/python-flask-login/python-flask-login.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_LOGIN_VERSION = 0.6.1 +PYTHON_FLASK_LOGIN_VERSION = 0.6.2 PYTHON_FLASK_LOGIN_SOURCE = Flask-Login-$(PYTHON_FLASK_LOGIN_VERSION).tar.gz -PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/3c/0a/e376d599eb6a8999b803a8d390e32451e43a346dbe540350dad48be0069c +PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/cc/da/eae45ba9ec58af45b46ef94c6ca04fb211ee57c06421b696e894eb11b064 PYTHON_FLASK_LOGIN_LICENSE = MIT PYTHON_FLASK_LOGIN_LICENSE_FILES = LICENSE PYTHON_FLASK_LOGIN_SETUP_TYPE = setuptools -- 2.37.3 From neal.frager at amd.com Mon Oct 17 09:44:29 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 17 Oct 2022 03:44:29 -0600 Subject: [Buildroot] [PATCH v1 1/1] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset Message-ID: <20221017094429.4752-1-neal.frager@amd.com> This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the kv260. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Please note that this is a temporary solution as the kv260 pmufw is not yet available on the Xilinx github. This is expected in the coming months. The nealfrager github uses the same licensing terms as the Xilinx github regarding the distribution of zynqmp pmufw binary files. https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE Signed-off-by: Neal Frager --- configs/zynqmp_kria_kv260_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig index 4700e651dc..25bab4cbb4 100644 --- a/configs/zynqmp_kria_kv260_defconfig +++ b/configs/zynqmp_kria_kv260_defconfig @@ -30,7 +30,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/nealfrager/buildroot-firmware/raw/v2022.1/kv260/kv260_pmufw.bin" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -- 2.17.1 From james.hilliard1 at gmail.com Mon Oct 17 11:29:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 07:29:52 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221017091644.1104527b@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> Message-ID: On Mon, Oct 17, 2022 at 3:16 AM Thomas Petazzoni wrote: > > Hello James, > > On Sun, 16 Oct 2022 12:45:06 -0400 > James Hilliard wrote: > > > > Again, that is very interesting, but please, please, conordinate with > > > the rest of us when you do such changes, because that is very weird, as > > > Fabrice noted, to suddenly get build failures out of the blue when > > > nothing seemed to have otherwise changed. > > > > I've been experimenting a bit in general with autobuilder settings to try > > and fix some issues with poor coverage. > > > > One other reason for testing with shuffle=random is to make higher kconfig > > probability values more useful(as otherwise build failures will be concentrated > > in packages early in the dependency ordering) : > > https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ > > Thanks a lot for all this work, which I find really useful. However, > like Yann said I believe we need to coordinate better. I think we would > prefer to see build results submitted on autobuild.buildroot.org to > only be generated by the official/upstream autobuild-run script. > Otherwise, it's super confusing as we get results that corresponding to > variations of build configurations/build logic that we are not even > aware they exist. The shuffle=random changes don't require modifying autobuild-run, I'm just tweaking the path to make in my autobuild service environment and then passing an additional config flag to autobuild-run like this: --make-opts="--shuffle=random" > > Another concern is that the autobuilder results are already extremely > bad these days, and therefore the priority is more on addressing/fixing > the existing issues rather than adding more. It's a lot > easier/practical to fix new problems when they are not mixed together > with zillions of old problems. Well builds were mostly failing in the same place due to deterministic build ordering, I was trying to make it so that we would see failures in different places as that's more useful compared with always seeing the same errors. To me seeing the same errors most of the time indicates there's some major coverage issues with the autobuilders which need fixing. > > Again, thanks a lot for your work on this! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From nolange79 at gmail.com Mon Oct 17 12:12:02 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 14:12:02 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: Message-ID: Hi, Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN : > > Hello All! > > This small four-patch series touches on the delicate intricacies of the > systemd package and how we integrate it in Buildroot, especially with > regard to read-only filesystems. > > The underlying issue is that systemd wants a writable /var filesystem > (it will store a bunch of things at runtime in there). A lot of packages > also expect a writable /var. After all, var stands for variadic, so it > is not supposed to be set in stone and read-only. Nobody says var should be read-only, the argument is about doing work up-front. Which is enough to get alot things running even *if* its read-only. > The solution we implemented in Buildroot is to generate a factory for > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > on boot. Having a tmpfs means /var is repopulated from a clean state at > each boot, and people who want a persistent /var have to provide their > own mechanism to mount their actual filesystem instead. Here the issue is, that the logic will never be complete, I will have to dig up old threads, but it fails with various combinations of symlinks. Its an inherently fragile approach, and I would question the solution as whole. > However, for some people, this does not seem to work as expected, so we > introduced a call to systemd-tmpfiles at build time, to pre-populate the > rootfs from all the tmpfiles, of which our var factory, at build time. There are several usecases where this is atleast non-optimal, and for a default to mess with the filesystem in such a way is not a good foundation. I am not sure if I am up-to-date, but the original call during the fakeroot stage you just do the work that wouldve been done on first boot. > > These two mechanism clash with each others, and are mostly incompatible, > and causes files to be duplicated. One of them doesn't do anything than a regular system start, the other is likely to cause trouble, trying to fix packages that wont work with an empty var in an automatic way. > > To solve the issue, this series introduces new options, so the user can > elect to use either, none, or both mechanisms, as they see fit. > > The first steps are borrowed from Yann at work, where we make it easier to > change the location where /var is nounted from, by making it a systemd > mount unit, rather than use the legacy fstab, and move the factory to > /usr/share as it is a system factory (/etc is for the administartor to > provide overrides). Note that those two are not strictly required for > the following, but since that makes it easier to change the /var > filesystem in a systemd-compliant manner, they are a nice addition to > the series. > > Then we move together the two mechanisms under the auspices of a common > package, to make it easier to later make them conditional. > > Finally, we introduce those two new options, that drive each mechanism. > > Eventally, we want to highlight that, by default, the behaviour has not > changed, since the two new options default to y, so as to explicitly > keep the behaviour from nefore this patchset. I would prefer a robust solution that provides a filesystem image that is compatible with further tinkering, particularly mounting /var in the initramfs. I attacked a drop-in solution, that has none of the drawbacks, correctly works with mounting stuff in /var, and only requires overlayfs to be available in the kernel. Funny detail: together with the upfront creation of some directories in /var via the systemd-tmpfiles build-time call, a basic usable system is available even if the overlay fails. The recurring attempts to discuss this ended in [1]. Short on time nowadays so I can hardly pull together all relevant parts again. regards, Norbert > > Regards, > Yann E. MORIN. > > > ---------------------------------------------------------------- > Yann E. MORIN (4): > package/skeleton-systemd: move /var factory out of /etc > package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs > package/skeleton-systemd: host the tmpfiles preparation script > system: add options for var factory and tmpfiles pre-seed > > .../fakeroot_tmpfiles.sh | 0 > .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- > package/skeleton-init-systemd/var.mount | 18 ++++++++++ > package/systemd/systemd.mk | 6 ---- > system/Config.in | 38 +++++++++++++++++++++- > 5 files changed, 69 insertions(+), 11 deletions(-) > rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) > create mode 100644 package/skeleton-init-systemd/var.mount > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' [1] - https://lists.buildroot.org/pipermail/buildroot/2022-July/645680.html -------------- next part -------------- A non-text attachment was scrubbed... Name: overlay_var.tar.xz Type: application/x-xz Size: 692 bytes Desc: not available URL: From thomas.petazzoni at bootlin.com Mon Oct 17 12:18:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 14:18:43 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-15 In-Reply-To: References: Message-ID: <20221017141843.0d7d2963@windsurf> Hello Paul, This is happening on James autobuilder, who has introduced some special randomization stuff that would only appear with make 4.4. I have added James in Cc so that he can comment and see if he can reproduce and provide more details. Best regards, Thomas On Mon, 17 Oct 2022 12:18:20 +0100 Paul Cercueil wrote: > Hi Thomas, > > I can't reproduce, with this build's defconfig on latest master. It > just builds fine here. > > Cheers, > -Paul > > > Le dim., oct. 16 2022 at 05:38:19 -0000, Thomas Petazzoni > a ?crit : > > Hello, > > > > Autobuilder failures > > ==================== > > > > Below is a list of build failures reported by the Buildroot > > autobuilders > > in relation to packages or CPU architectures you are in charge of. > > Please help us improving the quality of Buildroot by investigating > > those > > build failures and sending patches to fix them. > > > > Results for the 'master' branch > > ------------------------------- > > > > Build failures related to your packages: > > > > arch | reason | > > url > > -------------+--------------------------------+--------------------------------------------------------------------------------- > > arm | umtprd-1.6.2 | > > http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d > > > > > > Thanks for your contribution to Buildroot! > > > > -- > > http://autobuild.buildroot.net > > -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 12:21:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 14:21:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> Message-ID: <20221017142109.424863e1@windsurf> On Mon, 17 Oct 2022 07:29:52 -0400 James Hilliard wrote: > The shuffle=random changes don't require modifying autobuild-run, I'm > just tweaking the path to make in my autobuild service environment and > then passing an additional config flag to autobuild-run like this: > --make-opts="--shuffle=random" Right, but my point stands: it's custom usage/configuration of autobuild-run that we would prefer to discuss on the mailing list first before deploying/enabling. > Well builds were mostly failing in the same place due to deterministic > build ordering, I was trying to make it so that we would see failures > in different places as that's more useful compared with always seeing > the same errors. > > To me seeing the same errors most of the time indicates there's some > major coverage issues with the autobuilders which need fixing. I think you're missing a point here: many of the builds today are failing due to the glibc 2.36 bump. So pretty much every single build that is glibc based will indeed fail with some error related to this glibc bump. Your additional randomization will not change anything to this. It's just that we now have the glibc bump issues + the newly discovered issues related to the extra randomization + the usual amount of build issues. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From peter at korsgaard.com Mon Oct 17 14:08:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:11 +0200 Subject: [Buildroot] [PATCH 1/2] package/docker-cli: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-1-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 15:42:32 -0700") References: <20221016224233.237038-1-christian@paral.in> Message-ID: <875ygia6gk.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > This release of Docker Engine comes with some bug-fixes, and an updated version > of Docker Compose. > Builder > Fix an issue that could result in a panic during docker builder prune or > docker system prune moby/moby#44122. > Daemon > Fix a bug where using docker volume prune would remove volumes that were > still in use if the daemon was running with "live restore" and was restarted > moby/moby#44238. > Packaging > Update Docker Compose to v2.11.2. > https://github.com/moby/moby/releases/tag/v20.10.19 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From luca.ceresoli at bootlin.com Mon Oct 17 13:58:54 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Mon, 17 Oct 2022 15:58:54 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <20221017155854.48220785@booty> On Mon, 17 Oct 2022 01:10:01 -0600 Neal Frager wrote: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu102. > Details of the issue can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Signed-off-by: Neal Frager > --- > configs/zynqmp_zcu102_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig > index 217fa0814b..66c24c4b64 100644 > --- a/configs/zynqmp_zcu102_defconfig > +++ b/configs/zynqmp_zcu102_defconfig > @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > BR2_TARGET_UBOOT_SPL=y > BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" > BR2_TARGET_UBOOT_ZYNQMP=y > -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" > +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" Why are these binaries board-specific? I thought this used to be only needed for the "community workflow" before U-Boot SPL was able to load a pmufw cfg object. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From peter at korsgaard.com Mon Oct 17 14:08:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:17 +0200 Subject: [Buildroot] [PATCH 2/2] package/docker-engine: bump to version 20.10.19 In-Reply-To: <20221016224233.237038-2-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 15:42:33 -0700") References: <20221016224233.237038-1-christian@paral.in> <20221016224233.237038-2-christian@paral.in> Message-ID: <871qr6a6ge.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > This release of Docker Engine comes with some bug-fixes, and an updated version > of Docker Compose. > Builder > Fix an issue that could result in a panic during docker builder prune or > docker system prune moby/moby#44122. > Daemon > Fix a bug where using docker volume prune would remove volumes that were > still in use if the daemon was running with "live restore" and was restarted > moby/moby#44238. > Packaging > Update Docker Compose to v2.11.2. > https://github.com/moby/moby/releases/tag/v20.10.19 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 14:08:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:08:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/docker-compose: bump to version v2.11.2 In-Reply-To: <20221016230046.451093-1-christian@paral.in> (Christian Stewart's message of "Sun, 16 Oct 2022 16:00:46 -0700") References: <20221016230046.451093-1-christian@paral.in> Message-ID: <87wn8y8rvt.fsf@dell.be.48ers.dk> >>>>> "Christian" == Christian Stewart writes: > https://github.com/docker/compose/releases/tag/v2.11.2 > Signed-off-by: Christian Stewart Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 14:06:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:06:58 +0200 Subject: [Buildroot] [git commit] package/docker-cli: bump to version 20.10.19 Message-ID: <20221017140840.482E386E39@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=231e4922173ea55032b91b2d068610fd380afb78 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-cli/docker-cli.hash | 2 +- package/docker-cli/docker-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-cli/docker-cli.hash b/package/docker-cli/docker-cli.hash index 8af47adc63..153e0e5d00 100644 --- a/package/docker-cli/docker-cli.hash +++ b/package/docker-cli/docker-cli.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 87ba64f76d3bb98666fa44552c3eb0b1c10e5e9c43010e8dbc180ba22690413a docker-cli-20.10.18.tar.gz +sha256 f4398ad858274605f8e4e55d4618b2f5bdff6969a4afa232842bb2417d8a98db docker-cli-20.10.19.tar.gz sha256 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0 LICENSE diff --git a/package/docker-cli/docker-cli.mk b/package/docker-cli/docker-cli.mk index 707069512e..1fac21790b 100644 --- a/package/docker-cli/docker-cli.mk +++ b/package/docker-cli/docker-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_CLI_VERSION = 20.10.18 +DOCKER_CLI_VERSION = 20.10.19 DOCKER_CLI_SITE = $(call github,docker,cli,v$(DOCKER_CLI_VERSION)) DOCKER_CLI_LICENSE = Apache-2.0 From peter at korsgaard.com Mon Oct 17 14:07:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:07:15 +0200 Subject: [Buildroot] [git commit] package/docker-engine: bump to version 20.10.19 Message-ID: <20221017140840.5239186E3D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0a1195186fa64f6c9db05bc90f2a16cd10f449a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This release of Docker Engine comes with some bug-fixes, and an updated version of Docker Compose. Builder Fix an issue that could result in a panic during docker builder prune or docker system prune moby/moby#44122. Daemon Fix a bug where using docker volume prune would remove volumes that were still in use if the daemon was running with "live restore" and was restarted moby/moby#44238. Packaging Update Docker Compose to v2.11.2. https://github.com/moby/moby/releases/tag/v20.10.19 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-engine/docker-engine.hash | 2 +- package/docker-engine/docker-engine.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-engine/docker-engine.hash b/package/docker-engine/docker-engine.hash index e1c29f0926..dfd4f4e365 100644 --- a/package/docker-engine/docker-engine.hash +++ b/package/docker-engine/docker-engine.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9907aaaf39fb1c2c3fd427192e4a63d7adf8ddc9fb0e29c692a6ca10de9c34f6 docker-engine-20.10.18.tar.gz +sha256 228caadac1b37a5ba310eb25418cf1fdd8878336f1d8faf0a2daa87fcc577577 docker-engine-20.10.19.tar.gz sha256 7c87873291f289713ac5df48b1f2010eb6963752bbd6b530416ab99fc37914a8 LICENSE diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk index 246419ec4f..dc45baf055 100644 --- a/package/docker-engine/docker-engine.mk +++ b/package/docker-engine/docker-engine.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_ENGINE_VERSION = 20.10.18 +DOCKER_ENGINE_VERSION = 20.10.19 DOCKER_ENGINE_SITE = $(call github,moby,moby,v$(DOCKER_ENGINE_VERSION)) DOCKER_ENGINE_LICENSE = Apache-2.0 From peter at korsgaard.com Mon Oct 17 14:07:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 16:07:26 +0200 Subject: [Buildroot] [git commit] package/docker-compose: bump to version v2.11.2 Message-ID: <20221017140840.5C01386E3E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5af2679ddaaa887aa58eb841d37afcecddb73d3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/docker/compose/releases/tag/v2.11.2 Signed-off-by: Christian Stewart Signed-off-by: Peter Korsgaard --- package/docker-compose/docker-compose.hash | 2 +- package/docker-compose/docker-compose.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/docker-compose/docker-compose.hash b/package/docker-compose/docker-compose.hash index 46a8c59d55..39f98523b8 100644 --- a/package/docker-compose/docker-compose.hash +++ b/package/docker-compose/docker-compose.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7f051283dc2c047a40604c52dffa579a079bdf54eca742da54f8352dcffc3549 docker-compose-2.10.0.tar.gz +sha256 69d7d0311ac34ed4543f9a694995fbc4e2b785976a5a710015c20f0d04c204cb docker-compose-2.11.2.tar.gz sha256 58d1e17ffe5109a7ae296caafcadfdbe6a7d176f0bc4ab01e12a689b0499d8bd LICENSE diff --git a/package/docker-compose/docker-compose.mk b/package/docker-compose/docker-compose.mk index 1d071cc423..bc88d8df88 100644 --- a/package/docker-compose/docker-compose.mk +++ b/package/docker-compose/docker-compose.mk @@ -4,7 +4,7 @@ # ################################################################################ -DOCKER_COMPOSE_VERSION = 2.10.0 +DOCKER_COMPOSE_VERSION = 2.11.2 DOCKER_COMPOSE_SITE = $(call github,docker,compose,v$(DOCKER_COMPOSE_VERSION)) DOCKER_COMPOSE_LICENSE = Apache-2.0 DOCKER_COMPOSE_LICENSE_FILES = LICENSE From yann.morin at orange.com Mon Oct 17 14:11:54 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Mon, 17 Oct 2022 16:11:54 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: Message-ID: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Norbert, All, On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > : [--SNIP--] > > The solution we implemented in Buildroot is to generate a factory for > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > each boot, and people who want a persistent /var have to provide their > > own mechanism to mount their actual filesystem instead. > > Here the issue is, that the logic will never be complete, I will > have to dig up old threads, but it fails with various combinations > of symlinks. Then we should fix it up and make the procedure more robust, when you can point to actual issues so that we know how it is broken and how to fix it. I (see the post-scriptum) would be happy to help look into that. > Its an inherently fragile approach, and I would question the solution as whole. The thing is, out of the box, Buildroot needs a working situation. Providing an overlay (see below) requires a setup by the user, setup That is highly dependent on the actual target: does it need to be partitioned and formatted on first boot? If so, how? Should it be mounted on the whole of / or just /var? Those are not something that falls in the scope of Buildroot. Providing a var factory and a tmpfs on /var is the only solution that can be (rather easily) implemented. > > However, for some people, this does not seem to work as expected, so we > > introduced a call to systemd-tmpfiles at build time, to pre-populate the > > rootfs from all the tmpfiles, of which our var factory, at build time. > > There are several usecases where this is atleast non-optimal, > and for a default to mess with the filesystem in such a way is > not a good foundation. > > I am not sure if I am up-to-date, but the original call during > the fakeroot stage you just do the work that wouldve been > done on first boot. > > > > > These two mechanism clash with each others, and are mostly incompatible, > > and causes files to be duplicated. > > One of them doesn't do anything than a regular system start, > the other is likely to cause trouble, trying to fix packages > that wont work with an empty var in an automatic way. Look, I do understand that you do not want to be using the var factory, and I do appreciate your arguments. Now, please understand that some people are very happy with using a /var factory, and some are even happy that /var is being mounted as a tmpfs too. All this series does, is make the two mechanisms optional, so that people with different expectations can still have a functional systm in either case, without an overshoot in the filesystem size due to the duplication of files caused by unconditionally calling systemd-tmpfiles at build time. It even keeps the curent behaviour by default. > > To solve the issue, this series introduces new options, so the user can > > elect to use either, none, or both mechanisms, as they see fit. [--SNIP--] > I would prefer a robust solution that provides a filesystem image > that is compatible with further tinkering, particularly mounting /var > in the initramfs. That is assuming that one will use an initramfs. For example, in my systems, I do not use one, and I do not want to use one. > I attacked a drop-in solution, that has none of the drawbacks, > correctly works with mounting stuff in /var, > and only requires overlayfs to be available in the kernel. That is assuming two things: - that an initramfs be used - that an overlay be mounted However, in my case I expressely do not want to use an initramfs: my rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on /var, as I am very happy that /var gets factory value at boot (my resilient data is accessed in some other ways). > Funny detail: together with the upfront creation > of some directories in /var via the systemd-tmpfiles build-time call, > a basic usable system is available even if the overlay fails. That is not true. Anything that expects /var to be writable will fail to start. > The recurring attempts to discuss this ended in [1]. And this series addresses the fact that, for some people, the var factory is not a good solution, so that they can disable it. It also addresses the case of those people for whom the var factory actually works, and want to keep using it, can disable the systemd-tmpfiles buildtime call. And finally, I believe it may even address more complex situations, where people will provide their own fakeroot-script to do the preparatory works. Regards, Yann E. MORIN. PS. Please note that there are two different Yann in this thread: me at work using Buildroot, and Yann at home, one of the maintainers. Look at the email to be sure who's talking (not that I-at-work talk in the name of my employer either). I try to segregate the two identities as much as I can, but sometime there is some overlap, like here. YEM. > Short on time nowadays so I can hardly pull together all relevant parts again. > > regards, Norbert > > > > > Regards, > > Yann E. MORIN. > > > > > > ---------------------------------------------------------------- > > Yann E. MORIN (4): > > package/skeleton-systemd: move /var factory out of /etc > > package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs > > package/skeleton-systemd: host the tmpfiles preparation script > > system: add options for var factory and tmpfiles pre-seed > > > > .../fakeroot_tmpfiles.sh | 0 > > .../skeleton-init-systemd/skeleton-init-systemd.mk | 18 +++++++--- > > package/skeleton-init-systemd/var.mount | 18 ++++++++++ > > package/systemd/systemd.mk | 6 ---- > > system/Config.in | 38 +++++++++++++++++++++- > > 5 files changed, 69 insertions(+), 11 deletions(-) > > rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) > > create mode 100644 package/skeleton-init-systemd/var.mount > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > '------------------------------^-------^------------------^--------------------' > > [1] - https://lists.buildroot.org/pipermail/buildroot/2022-July/645680.html > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From neal.frager at amd.com Mon Oct 17 14:15:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Mon, 17 Oct 2022 14:15:16 +0000 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017155854.48220785@booty> References: <20221017071002.48266-1-neal.frager@amd.com> <20221017155854.48220785@booty> Message-ID: Hi Luca, > Why are these binaries board-specific? I thought this used to be only > needed for the "community workflow" before U-Boot SPL was able to load > a pmufw cfg object. Good question! I had a feeling you would ask this. In the case of the zcu102, zcu104 and zcu106, the pmufw binary is not board specific. The same pmufw binary will work on all 3 boards and even custom hardware, if a developer wants to use it unchanged. But since the pmu reset gpios are customisable among other things, the kria kv260 actually uses a different pmufw configuration. And developers may wish to modify the pmufw for their target as well. Since the Xilinx firmware repository is created using the petalinux prebuilt images for each target hardware, we chose to have a pmufw.elf in each board directory to match what comes from the petalinux builds. That said, since the Xilinx repository has a pmufw.elf in each individual board directory, I thought it would be cleaner for buildroot to use the pmufw.elf for each specific target. Even if the zcu102 and zcu106 pmufw.elf binaries are really interchangeable. What do you think? Best regards, Neal Frager AMD From cps at microplex.com Mon Oct 17 14:40:53 2022 From: cps at microplex.com (Cem Sezer) Date: Mon, 17 Oct 2022 07:40:53 -0700 Subject: [Buildroot] wpa_supplicant: TLSv1: No TLS version allowed In-Reply-To: References: Message-ID: Hello, The issue was solved and I figured I'd reply here in case someone has this happen to them. My bad certificate was due to my board not having a battery to keep the clock going when it was powered off, and therefore the date was 1970. Changing the date to the current fixed this. I also added NTP from buildroot later. Cem On Wed, Oct 5, 2022 at 6:11 PM Cem Sezer wrote: > Hello, > > I updated to the newly released buildroot-2022.08.01 released a few days > ago and it fixed the TLSv1.0 issue and it started using TLSv1.2. However, > now I get the error "EAP-PEAP: TLS processing failed". Additionally, my > radius server outputs "eap_peap: ERROR: TLS Alert read:fatal:bad > certificate".Not sure how to proceed here. > > Thanks, > > Cem > > On Wed, Oct 5, 2022 at 4:28 PM Cem Sezer wrote: > >> Hello, >> >> On a new build, when I run wpa_supplicant, it seems to only allow >> TLSv1.0. When I specify the supplicant to use a newer version of TLS in >> wpa_supplicant.conf under phase1, it fails and the debug output says >> "TLSv1: No TLS version allowed". Am I missing something? When I don't >> specify, it defaults to using TLSv1.0. I included all parts of >> wpa_supplicant, openssl, and libcurl when using menuconfig. I'm using >> buildroot-2022.08. The version of wpa_supplicant is v2.10 and openssl >> version 1.1.1.q >> >> Thanks in advance, >> >> Cem >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nolange79 at gmail.com Mon Oct 17 14:50:34 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 16:50:34 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Message-ID: Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > Norbert, All, > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > : > [--SNIP--] > > > The solution we implemented in Buildroot is to generate a factory for > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > each boot, and people who want a persistent /var have to provide their > > > own mechanism to mount their actual filesystem instead. > > > > Here the issue is, that the logic will never be complete, I will > > have to dig up old threads, but it fails with various combinations > > of symlinks. > > Then we should fix it up and make the procedure more robust, when you > can point to actual issues so that we know how it is broken and how to > fix it. I (see the post-scriptum) would be happy to help look into that. > > > Its an inherently fragile approach, and I would question the solution as whole. > > The thing is, out of the box, Buildroot needs a working situation. Yes, my argument would be a technical better solution. > > Providing an overlay (see below) requires a setup by the user, setup > That is highly dependent on the actual target: does it need to be > partitioned and formatted on first boot? If so, how? Should it be > mounted on the whole of / or just /var? > > Those are not something that falls in the scope of Buildroot. Providing > a var factory and a tmpfs on /var is the only solution that can be > (rather easily) implemented. Not sure you understand my appoach, more below. > > > > However, for some people, this does not seem to work as expected, so we > > > introduced a call to systemd-tmpfiles at build time, to pre-populate the > > > rootfs from all the tmpfiles, of which our var factory, at build time. > > > > There are several usecases where this is atleast non-optimal, > > and for a default to mess with the filesystem in such a way is > > not a good foundation. > > > > I am not sure if I am up-to-date, but the original call during > > the fakeroot stage you just do the work that wouldve been > > done on first boot. > > > > > > > > These two mechanism clash with each others, and are mostly incompatible, > > > and causes files to be duplicated. > > > > One of them doesn't do anything than a regular system start, > > the other is likely to cause trouble, trying to fix packages > > that wont work with an empty var in an automatic way. > > Look, I do understand that you do not want to be using the var factory, > and I do appreciate your arguments. > > Now, please understand that some people are very happy with using a /var > factory, and some are even happy that /var is being mounted as a tmpfs > too. Would they be unhappy if everything works as it did before? > > All this series does, is make the two mechanisms optional, so that people > with different expectations can still have a functional systm in either > case, without an overshoot in the filesystem size due to the duplication > of files caused by unconditionally calling systemd-tmpfiles at build > time. > > It even keeps the curent behaviour by default. I understand that, yes. > > > > To solve the issue, this series introduces new options, so the user can > > > elect to use either, none, or both mechanisms, as they see fit. > [--SNIP--] > > I would prefer a robust solution that provides a filesystem image > > that is compatible with further tinkering, particularly mounting /var > > in the initramfs. > > That is assuming that one will use an initramfs. For example, in my > systems, I do not use one, and I do not want to use one. No, initramfs is optional > > > I attacked a drop-in solution, that has none of the drawbacks, > > correctly works with mounting stuff in /var, > > and only requires overlayfs to be available in the kernel. > > That is assuming two things: > - that an initramfs be used > - that an overlay be mounted > > However, in my case I expressely do not want to use an initramfs: my > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > /var, as I am very happy that /var gets factory value at boot (my > resilient data is accessed in some other ways). I am not sure if initrd/initramfs means something different here. > > > Funny detail: together with the upfront creation > > of some directories in /var via the systemd-tmpfiles build-time call, > > a basic usable system is available even if the overlay fails. > > That is not true. Anything that expects /var to be writable will fail to > start. That's why I said basic usable system, more concrete: the services with systemd will work, and stuff like networking + openssh. > > > The recurring attempts to discuss this ended in [1]. > > And this series addresses the fact that, for some people, the var > factory is not a good solution, so that they can disable it. > > It also addresses the case of those people for whom the var factory > actually works, and want to keep using it, can disable the > systemd-tmpfiles buildtime call. > > And finally, I believe it may even address more complex situations, > where people will provide their own fakeroot-script to do the > preparatory works. My own usecase is that use the buildroot as pristine rootfs and then slice it up as necessary. But just to get this out of the way. More importantly, I would propose a simpler, yet more robust solution than the var factory. For this, the files in the attached archive have to end up in /lib/systemd/system. What this does: Before the time /var is supposed to be accessed, an tmpfs will be mounted in /run, and the /var folder will be shifted around to end up in an overlayfs *below* this tmpfs. The bind-mount is done with a systemd mount unit, means if you have mounts *in /var or below* those will be correctly ordered. - No initramfs necessary - No duplicate files in the var factory and tmpfs (unless they are modified of course). So your suashed files stay compressed. - No tricky autogenerated tmpfiles - Would be possible to do something similar in other init systems The only downside would be the reliance on overlayfs - technically you could also adopt that solution to copy stuff into the tmpfs. Besides my obvious biases there are technical arguments to be had. > > Regards, > Yann E. MORIN. > > PS. Please note that there are two different Yann in this thread: me at > work using Buildroot, and Yann at home, one of the maintainers. Look at > the email to be sure who's talking (not that I-at-work talk in the name > of my employer either). > I try to segregate the two identities as much as I can, but sometime > there is some overlap, like here. > YEM. Not making things much clearer ;) regards, Norbert From peter at korsgaard.com Mon Oct 17 15:05:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix In-Reply-To: <20221016153050.1163862-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:30:50 +0200") References: <20221016153050.1163862-1-bernd.kuhls@t-online.de> Message-ID: <87r0z68p8c.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:44 +0200 Subject: [Buildroot] [PATCH 1/2] package/libva: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:41:47 +0200") References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> Message-ID: <87mt9u8p87.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS > Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit > https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:48 +0200 Subject: [Buildroot] [PATCH 2/2] package/libva-utils: bump version to 2.16.0 In-Reply-To: <20221016154148.1254457-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:41:48 +0200") References: <20221016154148.1254457-1-bernd.kuhls@t-online.de> <20221016154148.1254457-2-bernd.kuhls@t-online.de> Message-ID: <87ilki8p83.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:53 +0200 Subject: [Buildroot] [PATCH 1/3] package/intel-gmmlib: bump version to 22.2.1 In-Reply-To: <20221016154646.1257569-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:44 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> Message-ID: <87edv68p7y.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:05:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:58 +0200 Subject: [Buildroot] [PATCH 3/3] package/intel-mediasdk: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-3-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:46 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> <20221016154646.1257569-3-bernd.kuhls@t-online.de> Message-ID: <87a65u8p7t.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:06:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:06:27 +0200 Subject: [Buildroot] [PATCH 2/3] package/intel-mediadriver: bump version to 22.5.4 In-Reply-To: <20221016154646.1257569-2-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 16 Oct 2022 17:46:45 +0200") References: <20221016154646.1257569-1-bernd.kuhls@t-online.de> <20221016154646.1257569-2-bernd.kuhls@t-online.de> Message-ID: <875ygi8p70.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:04:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:45 +0200 Subject: [Buildroot] [git commit] package/libva: bump version to 2.16.0 Message-ID: <20221017150655.6ECC686E38@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=998bf9206461855fc13e7a338abffdad2a1d0610 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://github.com/intel/libva/blob/v2.16-branch/NEWS Removed ac_cv_path_WAYLAND_SCANNER hack due to upstream commit https://github.com/intel/libva/commit/a60756887e59bef0c7e8b7b20814c64666be497d Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/libva/libva.hash | 6 +++--- package/libva/libva.mk | 3 +-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/package/libva/libva.hash b/package/libva/libva.hash index ecca9271cc..2916898c31 100644 --- a/package/libva/libva.hash +++ b/package/libva/libva.hash @@ -1,5 +1,5 @@ -# From https://github.com/intel/libva/releases/download/2.15.0/libva-2.15.0.tar.bz2.sha1sum -sha1 b4fca8600961336b246e80552f9b0278c187051b libva-2.15.0.tar.bz2 +# From https://github.com/intel/libva/releases/download/2.16.0/libva-2.16.0.tar.bz2.sha1sum +sha1 ba1c0e196d69a26e54b065dc0f645bdf3be147a7 libva-2.16.0.tar.bz2 # Locally computed -sha256 258ed409458d3e7a000e1908bc852619615ee6a933359c745fcd93eb3e461eca libva-2.15.0.tar.bz2 +sha256 115faca0db2c417a37da49830870e260450fa13066f5e24e252a20c36d920a1c libva-2.16.0.tar.bz2 sha256 c86a782ee845b52472dae9b9d79fb915d333628ac0efe49cdce63644814931de COPYING diff --git a/package/libva/libva.mk b/package/libva/libva.mk index 4138daf8b4..3b6e9580d3 100644 --- a/package/libva/libva.mk +++ b/package/libva/libva.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_VERSION = 2.15.0 +LIBVA_VERSION = 2.16.0 LIBVA_SOURCE = libva-$(LIBVA_VERSION).tar.bz2 LIBVA_SITE = https://github.com/intel/libva/releases/download/$(LIBVA_VERSION) LIBVA_LICENSE = MIT @@ -30,7 +30,6 @@ endif ifeq ($(BR2_PACKAGE_WAYLAND),y) LIBVA_DEPENDENCIES += wayland -LIBVA_CONF_ENV += ac_cv_path_WAYLAND_SCANNER=$(HOST_DIR)/bin/wayland-scanner LIBVA_CONF_OPTS += --enable-wayland else LIBVA_CONF_OPTS += --disable-wayland From peter at korsgaard.com Mon Oct 17 15:05:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:07 +0200 Subject: [Buildroot] [git commit] package/intel-gmmlib: bump version to 22.2.1 Message-ID: <20221017150655.827CE86E72@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d6e72d04d5b8c8ee8e6af21decc12e4c6570f583 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-gmmlib/intel-gmmlib.hash | 2 +- package/intel-gmmlib/intel-gmmlib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-gmmlib/intel-gmmlib.hash b/package/intel-gmmlib/intel-gmmlib.hash index 9509796850..bfff5e4b82 100644 --- a/package/intel-gmmlib/intel-gmmlib.hash +++ b/package/intel-gmmlib/intel-gmmlib.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0b2253894c6fc8455b6d7c5e87e6504a76d6f60ea192e1445c2f93164bf529c0 intel-gmmlib-22.2.0.tar.gz +sha256 363084a52db1557f6e7409278c8ce46a66fcafa2b4672e399c452501a60b4437 intel-gmmlib-22.2.1.tar.gz sha256 8b7446825df3f8b0268307e272aa6aaaf78351c83161d860d02c913c22666c48 LICENSE.md diff --git a/package/intel-gmmlib/intel-gmmlib.mk b/package/intel-gmmlib/intel-gmmlib.mk index 6fec276205..e949176cf7 100644 --- a/package/intel-gmmlib/intel-gmmlib.mk +++ b/package/intel-gmmlib/intel-gmmlib.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_GMMLIB_VERSION = 22.2.0 +INTEL_GMMLIB_VERSION = 22.2.1 INTEL_GMMLIB_SITE = https://github.com/intel/gmmlib/archive INTEL_GMMLIB_LICENSE = MIT INTEL_GMMLIB_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Mon Oct 17 15:04:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:58 +0200 Subject: [Buildroot] [git commit] package/libva-utils: bump version to 2.16.0 Message-ID: <20221017150655.789B686E71@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d8bad2880dc5826043bf7c257c78c5ca2cd13e33 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/libva-utils/libva-utils.hash | 2 +- package/libva-utils/libva-utils.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libva-utils/libva-utils.hash b/package/libva-utils/libva-utils.hash index 3ff6a488fb..95bcee782b 100644 --- a/package/libva-utils/libva-utils.hash +++ b/package/libva-utils/libva-utils.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 73609a24fe1dbf99e1472e20af1398d910f64c88b8615272f9f3539ffc5d2efc libva-utils-2.15.0.tar.gz +sha256 646c9bfff6a83504c48de2c786c9514ca30c5e916127faf00f143ef8147ee950 libva-utils-2.16.0.tar.gz sha256 c6220c9f87832c27abcb8a32eafdd2823e13ce146b3ea63d5deae2a76798ef50 COPYING diff --git a/package/libva-utils/libva-utils.mk b/package/libva-utils/libva-utils.mk index 0d6a3c062e..5feaa36995 100644 --- a/package/libva-utils/libva-utils.mk +++ b/package/libva-utils/libva-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBVA_UTILS_VERSION = 2.15.0 +LIBVA_UTILS_VERSION = 2.16.0 LIBVA_UTILS_SITE = $(call github,intel,libva-utils,$(LIBVA_UTILS_VERSION)) LIBVA_UTILS_LICENSE = MIT LIBVA_UTILS_LICENSE_FILES = COPYING From peter at korsgaard.com Mon Oct 17 15:04:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:04:30 +0200 Subject: [Buildroot] [git commit] package/kodi-pvr-zattoo: bump version to 19.7.16-Matrix Message-ID: <20221017150655.65A5486E6E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2ebdd163c0d7bbf77bbe61a71a4d0fb13d9d9796 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash | 2 +- package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash index a24a7abcd8..c1d3b476b9 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3126ce811e03ac92363a4e399b908336bb54328b7fa0d42c25ac85b2fe5aa7d4 kodi-pvr-zattoo-19.7.15-Matrix.tar.gz +sha256 ac09db721e51b47f1ca7f4c2201833dbcd69040fd19b09c194fa7491ff4dad41 kodi-pvr-zattoo-19.7.16-Matrix.tar.gz sha256 310782e1abd43c4de6217c513e328bddf999d39302d67c6e05b10a59959827af LICENSE.md diff --git a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk index 559dbf884b..49b33916ee 100644 --- a/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk +++ b/package/kodi-pvr-zattoo/kodi-pvr-zattoo.mk @@ -4,7 +4,7 @@ # ################################################################################ -KODI_PVR_ZATTOO_VERSION = 19.7.15-Matrix +KODI_PVR_ZATTOO_VERSION = 19.7.16-Matrix KODI_PVR_ZATTOO_SITE = $(call github,rbuehlma,pvr.zattoo,$(KODI_PVR_ZATTOO_VERSION)) KODI_PVR_ZATTOO_LICENSE = GPL-2.0+ KODI_PVR_ZATTOO_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Mon Oct 17 15:05:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:15 +0200 Subject: [Buildroot] [git commit] package/intel-mediadriver: bump version to 22.5.4 Message-ID: <20221017150655.8C86586E74@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=31c0e8b86ee2ec812f34ab621b676ea774c83499 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 949c9d5f66..35e4c97c7c 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 65652b365d48be3c9f0b3c561502952b92ee5fcc587520b88d0d752cf2a6a3b5 intel-media-22.5.3.tar.gz +sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index 91c93fdcf3..d0c1213965 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.3 +INTEL_MEDIADRIVER_VERSION = 22.5.4 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause From peter at korsgaard.com Mon Oct 17 15:05:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:05:23 +0200 Subject: [Buildroot] [git commit] package/intel-mediasdk: bump version to 22.5.4 Message-ID: <20221017150655.970A986E38@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7ec976e9de03516690ba9ea9bb68c62ad042f09f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index a770551875..25894aea63 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 078fc882d97273754cee9bf9cab6b4d4fb3bb087765867a76f2f2b2817e3d747 intel-mediasdk-22.5.3.tar.gz +sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index aea0cac014..4080188dc5 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.3 +INTEL_MEDIASDK_VERSION = 22.5.4 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE From peter at korsgaard.com Mon Oct 17 15:07:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/pipewire: bump to version 0.3.59 In-Reply-To: <20221016171257.1278757-1-james.hilliard1@gmail.com> (James Hilliard's message of "Sun, 16 Oct 2022 11:12:57 -0600") References: <20221016171257.1278757-1-james.hilliard1@gmail.com> Message-ID: <871qr68p5q.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > Disable new unsupported bluez5-codec-lc3 feature. > Signed-off-by: James Hilliard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:08:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:08:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-login: bump to version 0.6.2 In-Reply-To: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> (=?utf-8?Q?=22S=C3=A9bastien?= Szymanski"'s message of "Mon, 17 Oct 2022 11:05:04 +0200") References: <20221017090504.22960-1-sebastien.szymanski@armadeus.com> Message-ID: <87wn8y7ajz.fsf@dell.be.48ers.dk> >>>>> "S?bastien" == S?bastien Szymanski writes: > Signed-off-by: S?bastien Szymanski Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 17 15:07:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:00 +0200 Subject: [Buildroot] [git commit] package/pipewire: bump to version 0.3.59 Message-ID: <20221017150813.CD48D86E7E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c5428d8b7b83622578b2c75fc73691cbd0871d7d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Disable new unsupported bluez5-codec-lc3 feature. Signed-off-by: James Hilliard Signed-off-by: Peter Korsgaard --- package/pipewire/pipewire.hash | 2 +- package/pipewire/pipewire.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/pipewire/pipewire.hash b/package/pipewire/pipewire.hash index 21c3119945..9bead47bd9 100644 --- a/package/pipewire/pipewire.hash +++ b/package/pipewire/pipewire.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 da1fd2e6ee088aa22f5398caca76ff879e398ec9216fb6b9400c1177b8c68115 pipewire-0.3.57.tar.bz2 +sha256 32a6db3f42f00eb95a07369160a614420443ca4f4e90ac628db8ca508e08538e pipewire-0.3.59.tar.bz2 sha256 8909c319a7e27dbb33a15b9035f89ab3b7b2f6a12f8bcddc755206a8db1ada44 COPYING sha256 be4be5d77424833edf31f53fc1f1cecb6996b9e2d747d9e6fb8f878362ebc92b LICENSE diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk index 1aad4a3c5c..d7ae07170d 100644 --- a/package/pipewire/pipewire.mk +++ b/package/pipewire/pipewire.mk @@ -4,7 +4,7 @@ # ################################################################################ -PIPEWIRE_VERSION = 0.3.57 +PIPEWIRE_VERSION = 0.3.59 PIPEWIRE_SOURCE = pipewire-$(PIPEWIRE_VERSION).tar.bz2 PIPEWIRE_SITE = https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION) PIPEWIRE_LICENSE = MIT, LGPL-2.1+ (libspa-alsa), GPL-2.0 (libjackserver) @@ -20,6 +20,7 @@ PIPEWIRE_CONF_OPTS += \ -Dspa-plugins=enabled \ -Daudiomixer=enabled \ -Daudioconvert=enabled \ + -Dbluez5-codec-lc3=disabled \ -Dbluez5-codec-lc3plus=disabled \ -Dcontrol=enabled \ -Daudiotestsrc=enabled \ From peter at korsgaard.com Mon Oct 17 15:07:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 17:07:45 +0200 Subject: [Buildroot] [git commit] package/python-flask-login: bump to version 0.6.2 Message-ID: <20221017150813.D928786E80@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e02e0f6a3b0799027aa70aa5ecfbc634732c6077 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: S??bastien Szymanski Signed-off-by: Peter Korsgaard --- package/python-flask-login/python-flask-login.hash | 4 ++-- package/python-flask-login/python-flask-login.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-login/python-flask-login.hash b/package/python-flask-login/python-flask-login.hash index d11e37cce8..c88b70f2d5 100644 --- a/package/python-flask-login/python-flask-login.hash +++ b/package/python-flask-login/python-flask-login.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/flask-login/json -md5 0a1576eab473c2a8bb576348333d5ef5 Flask-Login-0.6.1.tar.gz -sha256 1306d474a270a036d6fd14f45640c4d77355e4f1c67ca4331b372d3448997b8c Flask-Login-0.6.1.tar.gz +md5 8020b22ad7ec6f17034f90117a520633 Flask-Login-0.6.2.tar.gz +sha256 c0a7baa9fdc448cdd3dd6f0939df72eec5177b2f7abe6cb82fc934d29caac9c3 Flask-Login-0.6.2.tar.gz # Locally computed sha256 checksums sha256 7a9dfb9c5da204ed1370f3b62c13e2992a12da1da707f47e156897eeb4344e5b LICENSE diff --git a/package/python-flask-login/python-flask-login.mk b/package/python-flask-login/python-flask-login.mk index 9a11fde542..394fe197e3 100644 --- a/package/python-flask-login/python-flask-login.mk +++ b/package/python-flask-login/python-flask-login.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_LOGIN_VERSION = 0.6.1 +PYTHON_FLASK_LOGIN_VERSION = 0.6.2 PYTHON_FLASK_LOGIN_SOURCE = Flask-Login-$(PYTHON_FLASK_LOGIN_VERSION).tar.gz -PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/3c/0a/e376d599eb6a8999b803a8d390e32451e43a346dbe540350dad48be0069c +PYTHON_FLASK_LOGIN_SITE = https://files.pythonhosted.org/packages/cc/da/eae45ba9ec58af45b46ef94c6ca04fb211ee57c06421b696e894eb11b064 PYTHON_FLASK_LOGIN_LICENSE = MIT PYTHON_FLASK_LOGIN_LICENSE_FILES = LICENSE PYTHON_FLASK_LOGIN_SETUP_TYPE = setuptools From thomas.perale at essensium.com Mon Oct 17 15:17:22 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:22 +0200 Subject: [Buildroot] [PATCH 0/4] Add support for using a pre-compiled Go compiler Message-ID: <20221017151726.44005-1-thomas.perale@mind.be> Improvement from the buildroot TODO list. This patch add supports for pre-built version of the Go compiler. Right now this patch introduce a new virtual package called 'goc' to do the selection between two provider: - go - go-bin Right now there is some variable from the 'go' package are used in multiple go provider packages. In an upcoming patch all the go related packages will move to a 'go' subfolder that will hold all the common variables. Thomas Perale (4): package/goc: new virtual package package/pkg-golang: set dependencies to host-goc package/go-bin: new package support/testing: add tests for Go fs/oci/Config.in | 1 + package/Config.in.host | 2 ++ package/balena-engine/Config.in | 1 + package/containerd/Config.in | 1 + package/crucible/Config.in | 1 + package/delve/Config.in | 1 + package/docker-cli/Config.in | 1 + package/docker-compose/Config.in | 1 + package/docker-engine/Config.in | 1 + package/docker-proxy/Config.in | 1 + package/embiggen-disk/Config.in | 1 + package/flannel/Config.in | 1 + package/gitlab-runner/Config.in | 1 + package/go-bin/Config.in.host | 5 +++ package/go-bin/go-bin.hash | 4 +++ package/go-bin/go-bin.mk | 20 ++++++++++++ package/go/go.mk | 2 ++ package/goc/Config.in.host | 39 +++++++++++++++++++++++ package/goc/goc.mk | 7 +++++ package/gocryptfs/Config.in | 1 + package/mender-artifact/Config.in.host | 1 + package/mender-connect/Config.in | 1 + package/mender/Config.in | 1 + package/moby-buildkit/Config.in | 1 + package/moby-buildkit/Config.in.host | 1 + package/nerdctl/Config.in | 1 + package/pkg-golang.mk | 4 +-- package/runc/Config.in | 1 + package/tinifier/Config.in | 1 + package/wtfutil/Config.in | 1 + support/testing/tests/package/test_go.py | 40 ++++++++++++++++++++++++ 31 files changed, 143 insertions(+), 2 deletions(-) create mode 100644 package/go-bin/Config.in.host create mode 100644 package/go-bin/go-bin.hash create mode 100644 package/go-bin/go-bin.mk create mode 100644 package/goc/Config.in.host create mode 100644 package/goc/goc.mk create mode 100644 support/testing/tests/package/test_go.py -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:23 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:23 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-2-thomas.perale@mind.be> This virtual package implement the already existing go compiler compiled from source and shows it on the host package menu. The usage of a virtual package on top of the go compiler enable the supports of for multiple providers for the Go compiler. Similarly to the rust compiler, a pre-built go compiler package will be available in parallel to the current compiled go compiler package. Signed-off-by: Thomas Perale --- package/Config.in.host | 1 + package/go/go.mk | 2 ++ package/goc/Config.in.host | 15 +++++++++++++++ package/goc/goc.mk | 7 +++++++ 4 files changed, 25 insertions(+) create mode 100644 package/goc/Config.in.host create mode 100644 package/goc/goc.mk diff --git a/package/Config.in.host b/package/Config.in.host index f437ef680c..8c44ff0cb4 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -38,6 +38,7 @@ menu "Host utilities" source "package/gnupg/Config.in.host" source "package/go/Config.in.host" source "package/go-bootstrap/Config.in.host" + source "package/goc/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" source "package/imagemagick/Config.in.host" diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..96c756cb11 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -12,6 +12,8 @@ GO_LICENSE = BSD-3-Clause GO_LICENSE_FILES = LICENSE GO_CPE_ID_VENDOR = golang +HOST_GO_PROVIDES = host-goc + HOST_GO_DEPENDENCIES = host-go-bootstrap HOST_GO_GOPATH = $(HOST_DIR)/share/go-path HOST_GO_HOST_CACHE = $(HOST_DIR)/share/host-go-cache diff --git a/package/goc/Config.in.host b/package/goc/Config.in.host new file mode 100644 index 0000000000..b0266b50ea --- /dev/null +++ b/package/goc/Config.in.host @@ -0,0 +1,15 @@ +config BR2_PACKAGE_HOST_GOC + bool "host go compiler" + depends on BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS + help + Compiler for the Go language + + https://go.dev + +if BR2_PACKAGE_HOST_GOC + +config BR2_PACKAGE_PROVIDES_HOST_GOC + string + default "host-go" + +endif diff --git a/package/goc/goc.mk b/package/goc/goc.mk new file mode 100644 index 0000000000..3259618989 --- /dev/null +++ b/package/goc/goc.mk @@ -0,0 +1,7 @@ +################################################################################ +# +# goc +# +################################################################################ + +$(eval $(host-virtual-package)) -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:24 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:24 +0200 Subject: [Buildroot] [PATCH 2/4] package/pkg-golang: set dependencies to host-goc In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-3-thomas.perale@mind.be> Use 'host-goc' instead of 'host-go' to build one of the implementation of the 'goc' package instead of building the 'go' package by default. Also select 'goc' in every package that are built by the go compiler to keep the dependencies in the 'menuconfig' corrects. Signed-off-by: Thomas Perale --- fs/oci/Config.in | 1 + package/balena-engine/Config.in | 1 + package/containerd/Config.in | 1 + package/crucible/Config.in | 1 + package/delve/Config.in | 1 + package/docker-cli/Config.in | 1 + package/docker-compose/Config.in | 1 + package/docker-engine/Config.in | 1 + package/docker-proxy/Config.in | 1 + package/embiggen-disk/Config.in | 1 + package/flannel/Config.in | 1 + package/gitlab-runner/Config.in | 1 + package/gocryptfs/Config.in | 1 + package/mender-artifact/Config.in.host | 1 + package/mender-connect/Config.in | 1 + package/mender/Config.in | 1 + package/moby-buildkit/Config.in | 1 + package/moby-buildkit/Config.in.host | 1 + package/nerdctl/Config.in | 1 + package/pkg-golang.mk | 4 ++-- package/runc/Config.in | 1 + package/tinifier/Config.in | 1 + package/wtfutil/Config.in | 1 + 23 files changed, 24 insertions(+), 2 deletions(-) diff --git a/fs/oci/Config.in b/fs/oci/Config.in index 5e7aff282f..a7c20fa60f 100644 --- a/fs/oci/Config.in +++ b/fs/oci/Config.in @@ -1,6 +1,7 @@ config BR2_TARGET_ROOTFS_OCI bool "oci image" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help Build an OCI (Open Container Initiative) image. diff --git a/package/balena-engine/Config.in b/package/balena-engine/Config.in index 02f694515e..64ff17752e 100644 --- a/package/balena-engine/Config.in +++ b/package/balena-engine/Config.in @@ -11,6 +11,7 @@ config BR2_PACKAGE_BALENA_ENGINE select BR2_PACKAGE_UTIL_LINUX_MOUNT # runtime select BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT # runtime select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT # runtime + select BR2_PACKAGE_HOST_GOC help balenaEngine is a new container engine purpose-built for embedded and IoT use cases and compatible with Docker diff --git a/package/containerd/Config.in b/package/containerd/Config.in index 0e3a55ef39..c07ee08d38 100644 --- a/package/containerd/Config.in +++ b/package/containerd/Config.in @@ -11,6 +11,7 @@ config BR2_PACKAGE_CONTAINERD select BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT select BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT select BR2_PACKAGE_UTIL_LINUX_MOUNT + select BR2_PACKAGE_HOST_GOC help containerd is a daemon to control runC. diff --git a/package/crucible/Config.in b/package/crucible/Config.in index b27eb31ae5..c15a335b49 100644 --- a/package/crucible/Config.in +++ b/package/crucible/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_CRUCIBLE bool "crucible" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help Crucible is a One-Time-Programmable (OTP) fusing tool for the i.MX family. diff --git a/package/delve/Config.in b/package/delve/Config.in index 9428e4016a..c1db230c4d 100644 --- a/package/delve/Config.in +++ b/package/delve/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_DELVE_ARCH_SUPPORTS default y if BR2_x86_64 depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + select BR2_PACKAGE_HOST_GOC config BR2_PACKAGE_DELVE bool "delve" diff --git a/package/docker-cli/Config.in b/package/docker-cli/Config.in index 6f187c9d22..ae57d57e39 100644 --- a/package/docker-cli/Config.in +++ b/package/docker-cli/Config.in @@ -3,6 +3,7 @@ config BR2_PACKAGE_DOCKER_CLI depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Docker is a platform to build, ship, and run applications as lightweight containers. diff --git a/package/docker-compose/Config.in b/package/docker-compose/Config.in index 59128f7a19..ca037f710e 100644 --- a/package/docker-compose/Config.in +++ b/package/docker-compose/Config.in @@ -4,6 +4,7 @@ config BR2_PACKAGE_DOCKER_COMPOSE depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_PACKAGE_DOCKER_CLI + select BR2_PACKAGE_HOST_GOC help Multi-container applications with the Docker CLI. diff --git a/package/docker-engine/Config.in b/package/docker-engine/Config.in index 1f0efb8fcc..25df1f5819 100644 --- a/package/docker-engine/Config.in +++ b/package/docker-engine/Config.in @@ -9,6 +9,7 @@ config BR2_PACKAGE_DOCKER_ENGINE select BR2_PACKAGE_CONTAINERD # runtime dependency select BR2_PACKAGE_DOCKER_PROXY # runtime dependency select BR2_PACKAGE_IPTABLES # runtime dependency + select BR2_PACKAGE_HOST_GOC help Docker is a platform to build, ship, and run applications as lightweight containers. diff --git a/package/docker-proxy/Config.in b/package/docker-proxy/Config.in index 7e40536537..09597b0b53 100644 --- a/package/docker-proxy/Config.in +++ b/package/docker-proxy/Config.in @@ -3,6 +3,7 @@ config BR2_PACKAGE_DOCKER_PROXY depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Libnetwork is a Container Network Model that provides a consistent programming interface and the required network diff --git a/package/embiggen-disk/Config.in b/package/embiggen-disk/Config.in index 667d71c86e..19d8696a67 100644 --- a/package/embiggen-disk/Config.in +++ b/package/embiggen-disk/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_EMBIGGEN_DISK depends on BR2_USE_MMU # util-linux select BR2_PACKAGE_UTIL_LINUX # sfdisk select BR2_PACKAGE_UTIL_LINUX_BINARIES # sfdisk + select BR2_PACKAGE_HOST_GOC help embiggen-disk is a tool to resize disk partitions at runtime. diff --git a/package/flannel/Config.in b/package/flannel/Config.in index eb8d798f48..800746f9c6 100644 --- a/package/flannel/Config.in +++ b/package/flannel/Config.in @@ -8,6 +8,7 @@ config BR2_PACKAGE_FLANNEL depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help Flannel is a virtual network that gives a subnet to each host for use with container runtimes. diff --git a/package/gitlab-runner/Config.in b/package/gitlab-runner/Config.in index 89e3e87b5c..b21763309b 100644 --- a/package/gitlab-runner/Config.in +++ b/package/gitlab-runner/Config.in @@ -16,6 +16,7 @@ config BR2_PACKAGE_GITLAB_RUNNER select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL # runtime select BR2_PACKAGE_LIBOPENSSL_BIN # runtime select BR2_PACKAGE_TAR # runtime + select BR2_PACKAGE_HOST_GOC help GitLab Runner is the open source project that is used to run your jobs and send the results back to GitLab. It is used in diff --git a/package/gocryptfs/Config.in b/package/gocryptfs/Config.in index 2630cafdcf..4cd8b368ea 100644 --- a/package/gocryptfs/Config.in +++ b/package/gocryptfs/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_GOCRYPTFS bool "gocryptfs" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS + select BR2_PACKAGE_HOST_GOC help gocryptfs is an encrypted FUSE overlay filesystem. diff --git a/package/mender-artifact/Config.in.host b/package/mender-artifact/Config.in.host index c7be0ed261..761dc0e022 100644 --- a/package/mender-artifact/Config.in.host +++ b/package/mender-artifact/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MENDER_ARTIFACT bool "host mender-artifact" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help The mender-artifact tool is a CLI implementation of the Mender artifacts library. diff --git a/package/mender-connect/Config.in b/package/mender-connect/Config.in index 0845910880..a91021f1f9 100644 --- a/package/mender-connect/Config.in +++ b/package/mender-connect/Config.in @@ -9,6 +9,7 @@ config BR2_PACKAGE_MENDER_CONNECT select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_MENDER # runtime select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_HOST_GOC help mender-connect is a daemon responsible for handling bidirectional (websocket) communication with the Mender diff --git a/package/mender/Config.in b/package/mender/Config.in index cccb46361b..b6fe196f86 100644 --- a/package/mender/Config.in +++ b/package/mender/Config.in @@ -6,6 +6,7 @@ config BR2_PACKAGE_MENDER select BR2_PACKAGE_OPENSSL select BR2_PACKAGE_LIBOPENSSL_ENABLE_MD4 if BR2_PACKAGE_LIBOPENSSL select BR2_PACKAGE_LIBOPENSSL_ENABLE_RMD160 if BR2_PACKAGE_LIBOPENSSL + select BR2_PACKAGE_HOST_GOC help Mender is an open source over-the-air (OTA) software updater for embedded Linux devices. Mender comprises a client diff --git a/package/moby-buildkit/Config.in b/package/moby-buildkit/Config.in index 93c852bcdb..27496b5647 100644 --- a/package/moby-buildkit/Config.in +++ b/package/moby-buildkit/Config.in @@ -5,6 +5,7 @@ config BR2_PACKAGE_MOBY_BUILDKIT depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC depends on BR2_USE_MMU + select BR2_PACKAGE_HOST_GOC select BR2_PACKAGE_CGROUPFS_MOUNT if !BR2_PACKAGE_SYSTEMD # runtime dependency help BuildKit is a toolkit for converting source code to build diff --git a/package/moby-buildkit/Config.in.host b/package/moby-buildkit/Config.in.host index a3b18548f8..335153e7fc 100644 --- a/package/moby-buildkit/Config.in.host +++ b/package/moby-buildkit/Config.in.host @@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MOBY_BUILDKIT bool "host moby-buildkit" depends on BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help BuildKit is a toolkit for converting source code to build artifacts in an efficient expressive and repeatable manner. diff --git a/package/nerdctl/Config.in b/package/nerdctl/Config.in index 969b9bb40e..472f7b9559 100644 --- a/package/nerdctl/Config.in +++ b/package/nerdctl/Config.in @@ -6,6 +6,7 @@ config BR2_PACKAGE_NERDCTL depends on !BR2_TOOLCHAIN_USES_UCLIBC # containerd depends on BR2_USE_MMU # util-linux select BR2_PACKAGE_CONTAINERD # runtime + select BR2_PACKAGE_HOST_GOC help Docker-compatible CLI for containerd, controlling runc. diff --git a/package/pkg-golang.mk b/package/pkg-golang.mk index 0b3dc3d32f..8c9e645a9c 100644 --- a/package/pkg-golang.mk +++ b/package/pkg-golang.mk @@ -49,8 +49,8 @@ $(2)_BUILD_OPTS += \ # Target packages need the Go compiler on the host at download time (for # vendoring), and at build and install time. -$(2)_DOWNLOAD_DEPENDENCIES += host-go -$(2)_DEPENDENCIES += host-go +$(2)_DOWNLOAD_DEPENDENCIES += host-goc +$(2)_DEPENDENCIES += host-goc $(2)_BUILD_TARGETS ?= . diff --git a/package/runc/Config.in b/package/runc/Config.in index fe527b1954..297aea8d64 100644 --- a/package/runc/Config.in +++ b/package/runc/Config.in @@ -4,6 +4,7 @@ config BR2_PACKAGE_RUNC depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS depends on BR2_TOOLCHAIN_HAS_THREADS depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve + select BR2_PACKAGE_HOST_GOC help runC is a CLI tool for spawning and running containers according to the OCI specification. diff --git a/package/tinifier/Config.in b/package/tinifier/Config.in index fbadfe6bd9..89718e3a37 100644 --- a/package/tinifier/Config.in +++ b/package/tinifier/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_TINIFIER bool "tinifier" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help CLI tool for images compressing diff --git a/package/wtfutil/Config.in b/package/wtfutil/Config.in index 8c3efcea5d..475e6d91df 100644 --- a/package/wtfutil/Config.in +++ b/package/wtfutil/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_WTFUTIL bool "wtfutil" depends on BR2_USE_MMU # fork() depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + select BR2_PACKAGE_HOST_GOC help WTF is the personal information dashboard for your terminal. -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:25 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:25 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-4-thomas.perale@mind.be> This package provides a pre-built version of the go compiler for the host target. This enable the user to select between the pre-built and the compiled version of the go compiler. The pre-built version will be used by default when a go compiler is required. The virtual package 'goc' creates a menu that let the user select which variant of the go compiler to use. The supported host platform for the pre-built compiler are actually the same as the one for 'go-bootstrap' no further verification are required than the one already in place. For now GO_BIN_VERSION and GO_VERSION are set the same by hand but in next version this variable should be in common. Because the order of the '.mk' file is not guaranteed this will be investigated in a next patch. Signed-off-by: Thomas Perale --- package/Config.in.host | 1 + package/go-bin/Config.in.host | 5 +++++ package/go-bin/go-bin.hash | 4 ++++ package/go-bin/go-bin.mk | 20 ++++++++++++++++++++ package/goc/Config.in.host | 26 +++++++++++++++++++++++++- 5 files changed, 55 insertions(+), 1 deletion(-) create mode 100644 package/go-bin/Config.in.host create mode 100644 package/go-bin/go-bin.hash create mode 100644 package/go-bin/go-bin.mk diff --git a/package/Config.in.host b/package/Config.in.host index 8c44ff0cb4..95b59bdacc 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -37,6 +37,7 @@ menu "Host utilities" source "package/genpart/Config.in.host" source "package/gnupg/Config.in.host" source "package/go/Config.in.host" + source "package/go-bin/Config.in.host" source "package/go-bootstrap/Config.in.host" source "package/goc/Config.in.host" source "package/google-breakpad/Config.in.host" diff --git a/package/go-bin/Config.in.host b/package/go-bin/Config.in.host new file mode 100644 index 0000000000..392060584f --- /dev/null +++ b/package/go-bin/Config.in.host @@ -0,0 +1,5 @@ +config BR2_PACKAGE_HOST_GO_BIN_HOST_ARCH + string + default 386 if BR2_HOSTARCH = "x86" + default amd64 if BR2_HOSTARCH = "x86_64" + default arm64 if BR2_HOSTARCH = "arm" diff --git a/package/go-bin/go-bin.hash b/package/go-bin/go-bin.hash new file mode 100644 index 0000000000..91456d3e9a --- /dev/null +++ b/package/go-bin/go-bin.hash @@ -0,0 +1,4 @@ +# sha256 checksum from https://go.dev/dl/ +sha256 9acc57342400c5b0c2da07b5b01b50da239dd4a7fad41a1fb56af8363ef4133f go1.19.1.linux-386.tar.gz +sha256 acc512fbab4f716a8f97a8b3fbaa9ddd39606a28be6c2515ef7c6c6311acffde go1.19.1.linux-amd64.tar.gz +sha256 49960821948b9c6b14041430890eccee58c76b52e2dbaafce971c3c38d43df9f go1.19.1.linux-arm64.tar.gz diff --git a/package/go-bin/go-bin.mk b/package/go-bin/go-bin.mk new file mode 100644 index 0000000000..cf2db90532 --- /dev/null +++ b/package/go-bin/go-bin.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# go-bin +# +################################################################################ + +GO_BIN_VERSION = 1.19.1 +GO_BIN_SITE = https://go.dev/dl +GO_BIN_LICENSE = BSD-3-Clause +GO_BIN_LICENSE_FILES = LICENSE + +HOST_GO_BIN_PROVIDES = host-goc + +HOST_GO_BIN_SOURCE = go$(GO_BIN_VERSION).linux-$(call qstrip, $(BR2_PACKAGE_HOST_GO_BIN_HOST_ARCH)).tar.gz + +define HOST_GO_BIN_INSTALL_CMDS + $(HOST_GO_INSTALL_CMDS) +endef + +$(eval $(host-generic-package)) diff --git a/package/goc/Config.in.host b/package/goc/Config.in.host index b0266b50ea..0bde50982f 100644 --- a/package/goc/Config.in.host +++ b/package/goc/Config.in.host @@ -8,8 +8,32 @@ config BR2_PACKAGE_HOST_GOC if BR2_PACKAGE_HOST_GOC +choice + prompt "Go compiler variant" + default BR2_PACKAGE_HOST_GO_BIN + help + Select a Go compiler variant. + + Default to 'host-go-bin'. + +config BR2_PACKAGE_HOST_GO + bool "host go" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + help + This package will build the go compiler for the host. + +config BR2_PACKAGE_HOST_GO_BIN + bool "host go (pre-built)" + help + This package will install pre-built versions of the compiler + for the host. + +endchoice + config BR2_PACKAGE_PROVIDES_HOST_GOC string - default "host-go" + # Default to host-go-bin + default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN + default "host-go" if BR2_PACKAGE_HOST_GO endif -- 2.37.0 From thomas.perale at essensium.com Mon Oct 17 15:17:26 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 17:17:26 +0200 Subject: [Buildroot] [PATCH 4/4] support/testing: add tests for Go In-Reply-To: <20221017151726.44005-1-thomas.perale@mind.be> References: <20221017151726.44005-1-thomas.perale@mind.be> Message-ID: <20221017151726.44005-5-thomas.perale@mind.be> Test the support of both the pre-built Go compiler and the Go compiler built from source. The test consists of compiling and installing in the root file system of a ARM vexpress QEMU system. The tests pass if the program can be ran correctly on the target. Signed-off-by: Thomas Perale --- support/testing/tests/package/test_go.py | 40 ++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 support/testing/tests/package/test_go.py diff --git a/support/testing/tests/package/test_go.py b/support/testing/tests/package/test_go.py new file mode 100644 index 0000000000..746aa28fc4 --- /dev/null +++ b/support/testing/tests/package/test_go.py @@ -0,0 +1,40 @@ +import os + +import infra.basetest + + +class TestGoBase(infra.basetest.BRTest): + + def login(self): + cpio_file = os.path.join(self.builddir, "images", "rootfs.cpio") + self.emulator.boot(arch="armv5", + kernel="builtin", + options=["-initrd", cpio_file]) + self.emulator.login() + + +class TestGoBin(TestGoBase): + config = infra.basetest.BASIC_TOOLCHAIN_CONFIG + \ + """ + BR2_TARGET_ROOTFS_CPIO=y + BR2_PACKAGE_HOST_GOC=y + BR2_PACKAGE_TINIFIER=y + """ + + def test_run(self): + self.login() + self.assertRunOk("tinifier -h") + + +class TestGo(TestGoBase): + config = infra.basetest.BASIC_TOOLCHAIN_CONFIG + \ + """ + BR2_TARGET_ROOTFS_CPIO=y + BR2_PACKAGE_HOST_GOC=y + BR2_PACKAGE_HOST_GO=y + BR2_PACKAGE_TINIFIER=y + """ + + def test_run(self): + self.login() + self.assertRunOk("tinifier -h") -- 2.37.0 From yann.morin at orange.com Mon Oct 17 16:00:44 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Mon, 17 Oct 2022 18:00:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> Message-ID: <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Norert, All, On 2022-10-17 16:50 +0200, Norbert Lange spake thusly: > Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > > : > > [--SNIP--] > > > > The solution we implemented in Buildroot is to generate a factory for > > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > > each boot, and people who want a persistent /var have to provide their > > > > own mechanism to mount their actual filesystem instead. > > > Here the issue is, that the logic will never be complete, I will > > > have to dig up old threads, but it fails with various combinations > > > of symlinks. > > The thing is, out of the box, Buildroot needs a working situation. > Yes, my argument would be a technical better solution. But so far, we do not have that technically better solution, so we need to fix things that are arctually broken. [--SNIP--] [--SNIP--] > > Now, please understand that some people are very happy with using a /var > > factory, and some are even happy that /var is being mounted as a tmpfs > > too. > Would they be unhappy if everything works as it did before? By "works as it did before", do you mean "using a var factory that was not broken for them"? Yes, I am being teasing. We'd have to evaluate the alternative proposal when we see it, if that can replace the existing solution. > > That is assuming that one will use an initramfs. For example, in my > > systems, I do not use one, and I do not want to use one. > No, initramfs is optional Ah, but you had so far only talked about using an initramfs to prepare an overlay, so I assumed your solution was tied to using an initramfs. If it's not, then let's see it. [--SNIP--] > > However, in my case I expressely do not want to use an initramfs: my > > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > > /var, as I am very happy that /var gets factory value at boot (my > > resilient data is accessed in some other ways). > I am not sure if initrd/initramfs means something different here. initrd is a blockdevice in memory. The filesystem one puts in there can be any filesystem that could be otherwise stored on another blockdevice. initramfs is a filesystem in memory, like a tmpfs. The initramfs is read-write. > > > The recurring attempts to discuss this ended in [1]. [--SNIP--] > > And finally, I believe it may even address more complex situations, > > where people will provide their own fakeroot-script to do the > > preparatory works. > > My own usecase is that use the buildroot as pristine rootfs and then > slice it up as > necessary. But just to get this out of the way. > > More importantly, I would propose a simpler, yet more robust solution > than the var factory. > > For this, the files in the attached archive have to end up in > /lib/systemd/system. Did you forget to attach something, by chance? > What this does: > Before the time /var is supposed to be accessed, an tmpfs will be > mounted in /run, We already have that: /run is automatically mounted by systemd, no? > and the /var folder will be shifted around to end up in an overlayfs > *below* this tmpfs. What do you mean by "shifted"? > The bind-mount is done with a systemd mount unit, means if you have mounts > *in /var or below* those will be correctly ordered. Yeah, switching away from the fstab is good. > - No initramfs necessary > - No duplicate files in the var factory and tmpfs (unless they are > modified of course). So your suashed files stay compressed. > - No tricky autogenerated tmpfiles > - Would be possible to do something similar in other init systems > > The only downside would be the reliance on overlayfs - technically you > could also > adopt that solution to copy stuff into the tmpfs. > > Besides my obvious biases there are technical arguments to be had. We all have biases, me ot the last. :-) My technical arguments for this series are: - it is currently kinda-broken - var factory works until proven otherwise - so we need to fix them I'll be sure to do as unbiased a review as possible for your proposal when I see it. ;-) > > PS. Please note that there are two different Yann in this thread: me at > > work using Buildroot, and Yann at home, one of the maintainers. Look at > > the email to be sure who's talking (not that I-at-work talk in the name > > of my employer either). > > I try to segregate the two identities as much as I can, but sometime > > there is some overlap, like here. > > YEM. > > Not making things much clearer ;) If it can comfort you, it is not much clearer in my own head either! ;-) Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From christian at paral.in Mon Oct 17 16:05:00 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:05:00 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017142849.41399-4-thomas.perale@mind.be> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> Message-ID: Hi all, This looks interesting, one request though... On Mon, Oct 17, 2022, 7:29 AM Thomas Perale wrote: > + # Default to host-go-bin > + default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN > + default "host-go" if BR2_PACKAGE_HOST_GO Please don't default to downloading something predompiled. Especially when the behavior currently defaults to compiling everything from source. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:06:51 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:06:51 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017142849.41399-2-thomas.perale@mind.be> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:29 AM Thomas Perale wrote: > This virtual package implement the already existing go compiler compiled > from source and shows it on the host package menu. > > The usage of a virtual package on top of the go compiler enable the > supports of for multiple providers for the Go compiler. Is it not possible to continue using the existing host-go target and simply add a parameter which enables downloading the precompiled version instead? Rather than add a new package. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:10:22 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:10:22 -0700 Subject: [Buildroot] [PATCH 2/4] package/pkg-golang: set dependencies to host-goc In-Reply-To: <20221017143125.41622-3-thomas.perale@mind.be> References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-3-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:31 AM Thomas Perale wrote: > Use 'host-goc' instead of 'host-go' to build one of the implementation > of the 'goc' package instead of building the 'go' package by default. > > Also select 'goc' in every package that are built by the go compiler > to keep the dependencies in the 'menuconfig' corrects. > Similar to my other email about this - why can't we keep using host-go and avoid changing everything across the tree? It should be possible to instead have a parameter for host go which changes the current default of compile from source to downloading the prebuilt. Also, nowhere in the Go ecosystem is it called 'goc' - this would add significant confusion, in my opinion. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian at paral.in Mon Oct 17 16:13:54 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 09:13:54 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017143125.41622-4-thomas.perale@mind.be> References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-4-thomas.perale@mind.be> Message-ID: Hi Thomas, On Mon, Oct 17, 2022, 7:31 AM Thomas Perale wrote: > This package provides a pre-built version of the go compiler for the > host target. > This enable the user to select between the pre-built and the compiled > version of the go compiler. The pre-built version will be used by > default when a go compiler is required. > > The virtual package 'goc' creates a menu that let the user select which > variant of the go compiler to use. > > The supported host platform for the pre-built compiler are actually the > same as the one for 'go-bootstrap' no further verification are required > than the one already in place. > > For now GO_BIN_VERSION and GO_VERSION are set the same by hand but in > next version this variable should be in common. Because the order of the > '.mk' file is not guaranteed this will be investigated in a next patch. > Instead of adding new packages... Continue using "host-go" and add parameters under a menu config for it. Then you can simply use a single variable - GO_VERSION - rather than 2 new packages. I'm happy to send a prototype of this if you need. Thanks, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From nolange79 at gmail.com Mon Oct 17 16:49:43 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Mon, 17 Oct 2022 18:49:43 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Message-ID: Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > Norert, All, > > On 2022-10-17 16:50 +0200, Norbert Lange spake thusly: > > Am Mo., 17. Okt. 2022 um 16:11 Uhr schrieb : > > > On 2022-10-17 14:12 +0200, Norbert Lange spake thusly: > > > > Am Sa., 15. Okt. 2022 um 23:23 Uhr schrieb Yann E. MORIN > > > > : > > > [--SNIP--] > > > > > The solution we implemented in Buildroot is to generate a factory for > > > > > /var, and register that as tmpfiles, at build time, and mount a tmpfs on > > > > > the then-empty /var at runtime, so that systemd-tmpfiles populates /var > > > > > on boot. Having a tmpfs means /var is repopulated from a clean state at > > > > > each boot, and people who want a persistent /var have to provide their > > > > > own mechanism to mount their actual filesystem instead. > > > > Here the issue is, that the logic will never be complete, I will > > > > have to dig up old threads, but it fails with various combinations > > > > of symlinks. > > > The thing is, out of the box, Buildroot needs a working situation. > > Yes, my argument would be a technical better solution. > > But so far, we do not have that technically better solution, so we need > to fix things that are arctually broken. I tried to bring that in for ages. Probably just have cooked up a patch instead. > > [--SNIP--] > [--SNIP--] > > > Now, please understand that some people are very happy with using a /var > > > factory, and some are even happy that /var is being mounted as a tmpfs > > > too. > > Would they be unhappy if everything works as it did before? > > By "works as it did before", do you mean "using a var factory that was > not broken for them"? Yes, I am being teasing. > > We'd have to evaluate the alternative proposal when we see it, if that > can replace the existing solution. > > > > That is assuming that one will use an initramfs. For example, in my > > > systems, I do not use one, and I do not want to use one. > > No, initramfs is optional > > Ah, but you had so far only talked about using an initramfs to prepare > an overlay, so I assumed your solution was tied to using an initramfs. > If it's not, then let's see it. Nah, it was always in respect of not messing around to much with the filesystem itself. I consider managing patch-series time consuming, so I'd like to discuss the way this should be structured before. This could be one completely separate package for example, allowing different solutions. > > [--SNIP--] > > > However, in my case I expressely do not want to use an initramfs: my > > > rootfs is a squashfs mounted on an initrd. I also have a tmpfs mounted on > > > /var, as I am very happy that /var gets factory value at boot (my > > > resilient data is accessed in some other ways). > > I am not sure if initrd/initramfs means something different here. > > initrd is a blockdevice in memory. The filesystem one puts in there can > be any filesystem that could be otherwise stored on another blockdevice. > > initramfs is a filesystem in memory, like a tmpfs. The initramfs is > read-write. Ok, I am using those pretty much interchangeable, just some block you tell the bootloader to load, either cpio or filesystem. > > > > > The recurring attempts to discuss this ended in [1]. > [--SNIP--] > > > And finally, I believe it may even address more complex situations, > > > where people will provide their own fakeroot-script to do the > > > preparatory works. > > > > My own usecase is that use the buildroot as pristine rootfs and then > > slice it up as > > necessary. But just to get this out of the way. > > > > More importantly, I would propose a simpler, yet more robust solution > > than the var factory. > > > > For this, the files in the attached archive have to end up in > > /lib/systemd/system. > > Did you forget to attach something, by chance? Was attached in my post before - now 2 mails back. gonna add it again for convienience. > > > What this does: > > Before the time /var is supposed to be accessed, an tmpfs will be > > mounted in /run, > > We already have that: /run is automatically mounted by systemd, no? mounts a tmpfs in /run/varoverlay, own directory. /run is guaranteed to be writable and available before any systemd unit is started. > > > and the /var folder will be shifted around to end up in an overlayfs > > *below* this tmpfs. > > What do you mean by "shifted"? you have to bind-mount /var to another directory, so you can use it as lower fs. /run/varoverlay/lower <- /var then.. you mount an overlayfs *at* /var where you need to reference the original folder with /run/varoverlay/lower /var <- overlay of /run/varoverlay/upper (tmpfs) and /run/varoverlay/lower( orignal /var ) > > > The bind-mount is done with a systemd mount unit, means if you have mounts > > *in /var or below* those will be correctly ordered. > > Yeah, switching away from the fstab is good. fstab wouldnt allow for the needed dependencies. > > > - No initramfs necessary > > - No duplicate files in the var factory and tmpfs (unless they are > > modified of course). So your suashed files stay compressed. > > - No tricky autogenerated tmpfiles > > - Would be possible to do something similar in other init systems > > > > The only downside would be the reliance on overlayfs - technically you > > could also > > adopt that solution to copy stuff into the tmpfs. > > > > Besides my obvious biases there are technical arguments to be had. > > We all have biases, me ot the last. :-) > > My technical arguments for this series are: > - it is currently kinda-broken > - var factory works until proven otherwise > - so we need to fix them > > I'll be sure to do as unbiased a review as possible for your proposal > when I see it. ;-) Gonna take me few days. should be easy to test tough with the provided files, just throw them into the buildroot filesystem overlay. Helps if you make some assessment where they should fit. the systemd package is already bloated enough. > > > > PS. Please note that there are two different Yann in this thread: me at > > > work using Buildroot, and Yann at home, one of the maintainers. Look at > > > the email to be sure who's talking (not that I-at-work talk in the name > > > of my employer either). > > > I try to segregate the two identities as much as I can, but sometime > > > there is some overlap, like here. > > > YEM. > > > > Not making things much clearer ;) > > If it can comfort you, it is not much clearer in my own head either! ;-) Good to know, so we can discuss on even terms. regards, Norbert -------------- next part -------------- A non-text attachment was scrubbed... Name: overlay_var.tar.xz Type: application/x-xz Size: 692 bytes Desc: not available URL: From peter at korsgaard.com Mon Oct 17 17:29:17 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 17 Oct 2022 19:29:17 +0200 Subject: [Buildroot] [PATCH] package/python-django: security bump to version 4.0.8 Message-ID: <20221017172918.1737004-1-peter@korsgaard.com> Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ - CVE-2022-41323: Potential denial-of-service vulnerability in internationalized URLs (4.0.8) https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ Signed-off-by: Peter Korsgaard --- package/python-django/python-django.hash | 4 ++-- package/python-django/python-django.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-django/python-django.hash b/package/python-django/python-django.hash index bfc9219c7e..72adc30bb1 100644 --- a/package/python-django/python-django.hash +++ b/package/python-django/python-django.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/django/json -md5 ad4e850c7110a45a6c7778d5bd01b85e Django-4.0.6.tar.gz -sha256 a67a793ff6827fd373555537dca0da293a63a316fe34cb7f367f898ccca3c3ae Django-4.0.6.tar.gz +md5 75ec07b3e00c79fd6e67fbee53786b7a Django-4.0.8.tar.gz +sha256 07e6433f263c3839939cfabeb6d7557841e0419e47759a7b7d37f6d44d40adcb Django-4.0.8.tar.gz # Locally computed sha256 checksums sha256 b846415d1b514e9c1dff14a22deb906d794bc546ca6129f950a18cd091e2a669 LICENSE diff --git a/package/python-django/python-django.mk b/package/python-django/python-django.mk index d49c845d54..567d590f77 100644 --- a/package/python-django/python-django.mk +++ b/package/python-django/python-django.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_DJANGO_VERSION = 4.0.6 +PYTHON_DJANGO_VERSION = 4.0.8 PYTHON_DJANGO_SOURCE = Django-$(PYTHON_DJANGO_VERSION).tar.gz # The official Django site has an unpractical URL -PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/a4/17/b10aa26d7a566a3c19e9d29fac39c8643cbceb6cd7649a378d676839b5db +PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/1a/de/08d8a349ed0e3e1999eb86ae0347cc9eaf634cd65f1eb80b9387ac1dbe3c PYTHON_DJANGO_LICENSE = BSD-3-Clause PYTHON_DJANGO_LICENSE_FILES = LICENSE -- 2.30.2 From yann.morin.1998 at free.fr Mon Oct 17 17:55:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 19:55:00 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> Message-ID: <20221017175500.GB3666@scaer> Christian, All, On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > This virtual package implement the already existing go compiler compiled > from source and shows it on the host package menu. > The usage of a virtual package on top of the go compiler enable the > supports of for multiple providers for the Go compiler. > Is it not possible to continue using the existing host-go target and > simply add a parameter which enables downloading the precompiled > version instead? > Rather than add a new package. In fact, we want to have a similar implementation for rust, go, nodejs, so (without looking at the details of this series), I guess Thomas Perale took the same approach as the existing rust situation, like Thomas Petazzoni did in the recent host-nodejs series: https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 17 18:03:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 20:03:50 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> Message-ID: <20221017180350.GC3666@scaer> Christian, All, On 2022-10-17 09:05 -0700, Christian Stewart via buildroot spake thusly: > Hi all, > This looks interesting, one request though... > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > +? ? ? ?# Default to host-go-bin > > +? ? ? ?default "host-go-bin" if BR2_PACKAGE_HOST_GO_BIN > +? ? ? ?default "host-go" if BR2_PACKAGE_HOST_GO > > Please don't default to downloading something predompiled. Especially when the behavior currently defaults to compiling everything > from source. Agreed. The default should be to build everything from source when sources are available. The pre-built packages are only a fallback as a convenience for those that are too much in a hurry. Regards, Yann E. MORIN. > Thanks, > Christian Stewart > > Links: > 1. mailto:thomas.perale at essensium.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From christian at paral.in Mon Oct 17 18:10:22 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:10:22 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017175500.GB3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: Yann, On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: > > Christian, All, > > On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > This virtual package implement the already existing go compiler compiled > > from source and shows it on the host package menu. > > The usage of a virtual package on top of the go compiler enable the > > supports of for multiple providers for the Go compiler. > > Is it not possible to continue using the existing host-go target and > > simply add a parameter which enables downloading the precompiled > > version instead? > > Rather than add a new package. > > In fact, we want to have a similar implementation for rust, go, nodejs, > so (without looking at the details of this series), I guess Thomas > Perale took the same approach as the existing rust situation, like > Thomas Petazzoni did in the recent host-nodejs series: > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Thomas changed host-nodejs to be a metapackage: https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ This is not what this series does, which is to add a new host-goc package and refactor all Go packages to point to this new one. Sidenote: having a rust-bin and nodejs-bin makes sense, as those take a /very long/ time to compile. Having a go-bin on the other hand does not make as much sense, because compiling the Go compiler is fast (about 1 minute vs. Rust's 1 hour). In my opinion: - Do not add a new host-goc package. - Add parameter to host-go to select which compiler to use: - bin - src - host go compiler (see patch linked below) - If src is buildable: default to it - If src is not buildable: default to host Go compiler - Or if the parameter is set: use bin download This patch already solves the issue of selecting when to use the host go compiler or not: https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ ... it would be straightforward to add the Config parameter + binary download to host-go after applying that commit. My reasoning for why: - Avoid refactoring all Go packages across the tree. - Avoid confusing "goc" name (not used in Go ecosystem) - Backwards compatible with existing configs. - Fewer packages to maintain, easier to understand structure. I'll have a look at submitting a RFC series adjusting this one to the above structure. Thanks, Christian Stewart From bernd.kuhls at t-online.de Mon Oct 17 18:15:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 17 Oct 2022 20:15:23 +0200 Subject: [Buildroot] [PATCH 2022.02.x] package/php: security bump version to 8.0.24 Message-ID: <20221017181523.95205-1-bernd.kuhls@t-online.de> Fixes - CVE-2022-31629: http://bugs.php.net/81727 - CVE-2022-31628: http://bugs.php.net/81726 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 2e9aa6880b..55a92c6c36 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 973fec765336ee01f47536a5db1c2eee98df9d34a41522b7b6c760159bf0a77b php-8.0.20.tar.xz +sha256 8e6a63ac9cdabe4c345b32a54b18f348d9e50a1decda217faf2d61278d22f08b php-8.0.24.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index d9c2edd839..facc2f5634 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.0.20 +PHP_VERSION = 8.0.24 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.30.2 From bernd.kuhls at t-online.de Mon Oct 17 18:16:27 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 17 Oct 2022 20:16:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.11 References: <20221016155252.1723048-1-bernd.kuhls@t-online.de> <87k04yals1.fsf__18092.1028529823$1665995868$gmane$org@dell.be.48ers.dk> Message-ID: Am Mon, 17 Oct 2022 10:37:18 +0200 schrieb Peter Korsgaard: >>>>>> "Bernd" == Bernd Kuhls >>>>>> writes: > > > Fixes - CVE-2022-31628: http://bugs.php.net/81726 - CVE-2022-31629: > > http://bugs.php.net/81727 > > > Signed-off-by: Bernd Kuhls > > > > Committed, thanks. > > Is there a similar fix for the 8.0.x branch for 2022.02.x? Hi Peter, yes, sent http://patchwork.ozlabs.org/project/buildroot/patch/ 20221017181523.95205-1-bernd.kuhls at t-online.de/ Regards, Bernd From thomas.perale at essensium.com Mon Oct 17 18:30:27 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Mon, 17 Oct 2022 20:30:27 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <42635550-c5eb-fcc9-dfc2-18c2776111ca@essensium.com> Dear Christian, Yann, Thank you for responses. As Yann said my idea behing "goc" was to keep the structure the same as the already existing case of 'rustc'. But I do agree with you Christian the 'goc' name is confusing and don't make much sense. Right now I'm already working on a second patch that will put every "go" related packages in a sub-directory: > package/ > ?? go/ > ? ?? go/ > ? ?? go-bin/ > ? ?? go-bootstrap/ > ? ?? go.mk > ? ?? Config.in This will remove the dependency to 'goc' virtual package because I will move it to 'package/go/go.mk' with the common variable between every 'go*' package. I just want to keep the same structure as Rust from now and if I do the modification of moving it to a subdir I also want to do the modification for rust packages. PERALE Thomas On 10/17/22 20:10, Christian Stewart wrote: > Yann, > > On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: >> Christian, All, >> >> On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: >>> On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: >>> This virtual package implement the already existing go compiler compiled >>> from source and shows it on the host package menu. >>> The usage of a virtual package on top of the go compiler enable the >>> supports of for multiple providers for the Go compiler. >>> Is it not possible to continue using the existing host-go target and >>> simply add a parameter which enables downloading the precompiled >>> version instead? >>> Rather than add a new package. >> In fact, we want to have a similar implementation for rust, go, nodejs, >> so (without looking at the details of this series), I guess Thomas >> Perale took the same approach as the existing rust situation, like >> Thomas Petazzoni did in the recent host-nodejs series: >> >> https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 > Thomas changed host-nodejs to be a metapackage: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ > > This is not what this series does, which is to add a new host-goc > package and refactor all Go packages to point to this new one. > > Sidenote: having a rust-bin and nodejs-bin makes sense, as those take > a /very long/ time to compile. Having a go-bin on the other hand does > not make as much sense, because compiling the Go compiler is fast > (about 1 minute vs. Rust's 1 hour). > > In my opinion: > > - Do not add a new host-goc package. > - Add parameter to host-go to select which compiler to use: > - bin > - src > - host go compiler (see patch linked below) > - If src is buildable: default to it > - If src is not buildable: default to host Go compiler > - Or if the parameter is set: use bin download > > This patch already solves the issue of selecting when to use the host > go compiler or not: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ > > ... it would be straightforward to add the Config parameter + binary > download to host-go after applying that commit. > > My reasoning for why: > > - Avoid refactoring all Go packages across the tree. > - Avoid confusing "goc" name (not used in Go ecosystem) > - Backwards compatible with existing configs. > - Fewer packages to maintain, easier to understand structure. > > I'll have a look at submitting a RFC series adjusting this one to the > above structure. > > Thanks, > Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Mon Oct 17 18:42:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 20:42:32 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017180350.GC3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> <20221017180350.GC3666@scaer> Message-ID: <20221017204232.652f8e89@windsurf> On Mon, 17 Oct 2022 20:03:50 +0200 "Yann E. MORIN" wrote: > Agreed. The default should be to build everything from source when > sources are available. The pre-built packages are only a fallback as > a convenience for those that are too much in a hurry. Except we do exactly the opposite for Rust, and I'm not sure for the host compiler of those languages it is a good idea to cause such a major impact on the default build time faced by our users. I clearly understand the need to be able from source and appreciate how important it is, but I'm not so sure the default should be to build all those compilers from source. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 17 18:44:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 20:44:42 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <20221017184442.GD3666@scaer> Christian, All, On 2022-10-17 11:10 -0700, Christian Stewart spake thusly: > On Mon, Oct 17, 2022 at 10:55 AM Yann E. MORIN wrote: > > On 2022-10-17 09:06 -0700, Christian Stewart spake thusly: > > > On Mon, Oct 17, 2022, 7:29 AM Thomas Perale < [1]thomas.perale at essensium.com> wrote: > > > This virtual package implement the already existing go compiler compiled > > > from source and shows it on the host package menu. > > > The usage of a virtual package on top of the go compiler enable the > > > supports of for multiple providers for the Go compiler. > > > Is it not possible to continue using the existing host-go target and > > > simply add a parameter which enables downloading the precompiled > > > version instead? > > > Rather than add a new package. > > In fact, we want to have a similar implementation for rust, go, nodejs, > > so (without looking at the details of this series), I guess Thomas > > Perale took the same approach as the existing rust situation, like > > Thomas Petazzoni did in the recent host-nodejs series: > > > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 > > Thomas changed host-nodejs to be a metapackage: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220925204030.1661583-3-thomas.petazzoni at bootlin.com/ That patch does: - move the current host-nodejs package to host-nodejs-src as a host-generic-pacakge, - changes the existing host-nodejs from a host-generic-package to a host-virtual-package (there is no such notion as a meta-package in Buildroot) > This is not what this series does, which is to add a new host-goc > package and refactor all Go packages to point to this new one. I had a quick look, and it is indeed not what I expected it to be. > Sidenote: having a rust-bin and nodejs-bin makes sense, as those take > a /very long/ time to compile. Having a go-bin on the other hand does > not make as much sense, because compiling the Go compiler is fast > (about 1 minute vs. Rust's 1 hour). It takes a bit longer here, as host-go-bootstrap depends on the toolchain. So, running "make foo-legal-info" to check a go package, does take ages. > In my opinion: > - Do not add a new host-goc package. > - Add parameter to host-go to select which compiler to use: > - bin > - src I am not sure I follow what you are saying. If you are sayng that it should be as rust currently is, and as the nodejs proposal is, then I agree. ;-) > - host go compiler (see patch linked below) If we have a pre-built host-go in the tree, thetre is then no reason to be able to use the host system go compiler, is there? > - If src is buildable: default to it > - If src is not buildable: default to host Go compiler > - Or if the parameter is set: use bin download > > This patch already solves the issue of selecting when to use the host > go compiler or not: > > https://patchwork.ozlabs.org/project/buildroot/patch/20220725011322.1301684-1-christian at paral.in/ > > ... it would be straightforward to add the Config parameter + binary > download to host-go after applying that commit. > > My reasoning for why: > > - Avoid refactoring all Go packages across the tree. Agreed. This should be transparent to packages. > - Avoid confusing "goc" name (not used in Go ecosystem) Agreed. > - Backwards compatible with existing configs. If that is possible, then agreed; if it is not, then use sensible defaults (like build from source by default). > - Fewer packages to maintain, Not too much of a headache... > easier to understand structure. I am afraid I have to agree on that part, as the existing host-rust strucutre bit me not too long ago... > I'll have a look at submitting a RFC series adjusting this one to the > above structure. I would emphasize that we do want to have an similar implementation for go that we have for rust, and as was proposed for node. Regards, Yann E. MORIN. > Thanks, > Christian Stewart -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 17 18:48:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 20:48:19 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017175500.GB3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> Message-ID: <20221017204819.47cb4078@windsurf> On Mon, 17 Oct 2022 19:55:00 +0200 "Yann E. MORIN" wrote: > In fact, we want to have a similar implementation for rust, go, nodejs, > so (without looking at the details of this series), I guess Thomas > Perale took the same approach as the existing rust situation, like > Thomas Petazzoni did in the recent host-nodejs series: > > https://patchwork.ozlabs.org/project/buildroot/list/?series=319967 Yes and no, because Thomas Perale changed all packages using Go to use host-goc instead of host-go, while my series keeps host-nodejs but changes it from host-generic-package to host-virtual-package. Also, I'd like to recap the naming we have: - Rust (existing) virtual package: host-rustc pre-compiled package: host-rust-bin from source package: host-rust - NodeJS (proposed by me) virtual package: host-nodejs pre-compiled package: host-nodejs-bin from source package: host-nodejs-src The odd thing here being that host-nodejs is a virtual package, but nodejs is a regular package building NodeJS from source for the target. - Go (proposed by Thomas Perale) virtual package: host-goc pre-compiled package: host-go-bin from source package: host-go So Thomas aligned on the naming used in the Rust world. I must say I do have a preference for the naming I have chosen for NodeJS, which IMO is clearer. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Mon Oct 17 18:51:00 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:51:00 -0700 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: <20221017184442.GD3666@scaer> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> <20221017184442.GD3666@scaer> Message-ID: Hi Yann, Just to reply to that one question on why a host go compiler is useful- On Mon, Oct 17, 2022 at 11:45 AM Yann E. MORIN wrote: > > - host go compiler (see patch linked below) > > If we have a pre-built host-go in the tree, thetre is then no reason to > be able to use the host system go compiler, is there? The host Go compiler may be compiled from source (i.e. Gentoo) and the user (me) wants to trust the gentoo binary for Go over downloading another precompiled bin from the internet. Thomas - On Mon, Oct 17, 2022 at 11:48 AM Thomas Petazzoni wrote: > - NodeJS (proposed by me) > virtual package: host-nodejs > pre-compiled package: host-nodejs-bin > from source package: host-nodejs-src > > The odd thing here being that host-nodejs is a virtual package, but > nodejs is a regular package building NodeJS from source for the > target. > > - Go (proposed by Thomas Perale) > virtual package: host-goc > pre-compiled package: host-go-bin > from source package: host-go > > So Thomas aligned on the naming used in the Rust world. I must say I do > have a preference for the naming I have chosen for NodeJS, which IMO is > clearer. I agree that the following would be preferable: virtual package: host-go pre-compiled package: host-go-bin from source package: host-go-src ... although I would submit that all 3 could live in a single host-go package. Best, Christian Stewart From christian at paral.in Mon Oct 17 18:52:43 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 17 Oct 2022 11:52:43 -0700 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: <20221017204232.652f8e89@windsurf> References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-4-thomas.perale@mind.be> <20221017180350.GC3666@scaer> <20221017204232.652f8e89@windsurf> Message-ID: Thomas, On Mon, Oct 17, 2022 at 11:42 AM Thomas Petazzoni wrote: > > On Mon, 17 Oct 2022 20:03:50 +0200 > "Yann E. MORIN" wrote: > > > Agreed. The default should be to build everything from source when > > sources are available. The pre-built packages are only a fallback as > > a convenience for those that are too much in a hurry. > > Except we do exactly the opposite for Rust, and I'm not sure for the > host compiler of those languages it is a good idea to cause such a > major impact on the default build time faced by our users. I clearly > understand the need to be able from source and appreciate how important > it is, but I'm not so sure the default should be to build all those > compilers from source. As you mentioned in a reply on the other email thread- The main thing that takes time with host-go from source is building the C toolchain. Provided that the C toolchain is pre-compiled, building host-go doesn't take long (~1-2 mins). Best regards, Christian Stewart From james.hilliard1 at gmail.com Mon Oct 17 19:02:32 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 15:02:32 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221017142109.424863e1@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221016075056.GI2503@scaer> <20221016160505.GK2503@scaer> <20221017091644.1104527b@windsurf> <20221017142109.424863e1@windsurf> Message-ID: On Mon, Oct 17, 2022 at 8:21 AM Thomas Petazzoni wrote: > > On Mon, 17 Oct 2022 07:29:52 -0400 > James Hilliard wrote: > > > The shuffle=random changes don't require modifying autobuild-run, I'm > > just tweaking the path to make in my autobuild service environment and > > then passing an additional config flag to autobuild-run like this: > > --make-opts="--shuffle=random" > > Right, but my point stands: it's custom usage/configuration of > autobuild-run that we would prefer to discuss on the mailing list first > before deploying/enabling. I've generally been deploying autobuild-run tweaks after initial local testing. Typically I send them to the mailing list after running them deployed for a little to clean them up and make sure they work as expected and verify the builds that are failing are not due to bugs in the autobuild-run tweaks themselves. They don't usually get looked at for a while in patchwork so I haven't really been bringing them up on the mailing list until after I've tested/deployed them myself for a little, I have a couple pending in patchwork at the moment for autobuild-run for example: https://patchwork.ozlabs.org/project/buildroot/patch/20220607231211.533086-1-james.hilliard1 at gmail.com/ https://patchwork.ozlabs.org/project/buildroot/patch/20220718043901.873466-1-james.hilliard1 at gmail.com/ Sometimes I override genrandconfig as well to test patches such as: https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ I have a local patch to autobuild-run that redirects to an out of tree genrandconfig so that I can test tweaks there. I also have it validating that the in tree version of genrandconfig hasn't changed by comparing against a known sha256 hash before using the out of tree tweaked version to ensure that autobuild-run automatically falls back to using the in-tree genrandconfig if genrandconfig gets changed/fixes in upstream buildroot. For autobuild-run changes that increase error rates significantly due to higher rates of bugs which need fixes in buildroot I sometimes have held off on sending them as patches until the rates of errors triggered get low enough that it would make sense for others to use those changes as well. In this case I was also holding off on a patch automatically enabling shuffle mode to autobuild-run as using that feature currently requires running a yet to be released version of make and was triggering a few issues in buildroot that needed fixing on the buildroot side. I also figured that by testing master make using the autobuilders we can get make issues fixed upstream before the next make release, such as this shuffle mode bug so far: https://savannah.gnu.org/bugs/index.php?63215 What sort of autobuilder changes would you like me to discuss on the mailing list before deploying? I tend to experiment a bit but am usually pretty careful to make sure that my autobuilder tweaks only cause build failures due to real bugs that need fixing in buildroot/buildroot packages. > > > Well builds were mostly failing in the same place due to deterministic > > build ordering, I was trying to make it so that we would see failures > > in different places as that's more useful compared with always seeing > > the same errors. > > > > To me seeing the same errors most of the time indicates there's some > > major coverage issues with the autobuilders which need fixing. > > I think you're missing a point here: many of the builds today are > failing due to the glibc 2.36 bump. So pretty much every single build > that is glibc based will indeed fail with some error related to this > glibc bump. Probably a lot were failing for a couple days due to this glibc bug: https://github.com/buildroot/buildroot/commit/b749d6dd7b5fc6cc8b85a316878721d42654759c There's probably some failures still due to this issue but most of the others seem to be dependency bugs in package makefiles: https://patchwork.ozlabs.org/project/buildroot/patch/20221016193014.3384022-1-james.hilliard1 at gmail.com/ However I'm actually referring to a separate issue with test coverage that has always been present. > > Your additional randomization will not change anything to this. It's > just that we now have the glibc bump issues + the newly discovered > issues related to the extra randomization + the usual amount of build > issues. When I brought patch up this on irc: https://patchwork.ozlabs.org/project/buildroot/patch/20220514214612.3221647-1-james.hilliard1 at gmail.com/ arnout mentioned: 2022-07-25.log-[03:28:02] Lightsword: about the build time: I think the issue is that if you increase the number of selected packages, you also reduce the number of successful builds (because it fails as soon as one failing package is selected) - and that way, packages that get built late (i.e. that come late in the alphabet and have no reverse dependencies) don't get built. This is indeed the case when I tested increasing the probability further, however by randomizing the dependency ordering using make 4.4's new shuffle mode we should be able to mitigate the alphabetical ordering bias issue and thus get better test coverage of packages with larger dependency trees by increasing the number of selected packages while using shuffle mode. Looking at the current autobuilder failure logs I'm seeing that most autobuilders other than my own have much lower build failure rates and not much variety in terms of failure reasons due to poor coverage of packages with larger dependency trees. For my own autobuilders running with shuffle mode I'm seeing much higher failure rates for different reasons so these changes do appear to be increasing out test coverage overall, there's a lot of issues with makefile dependency ordering that are new and I suspect once those are fixed we'll be able to get much better overall coverage of more common issues, especially issues hit when running parallel builds. > > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 17 19:01:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 21:01:42 +0200 Subject: [Buildroot] [git commit] package/openssh: fix hash of LICENSE file Message-ID: <20221017190300.6A2B186E83@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=291c6c27adaf75ffd1d84b920e1ed79c3f84cc13 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The bump from 9.0p1 to 9.1p1 in commit bb571dc3e87d0e84b3ae121e0d4a9c6039a051fa forgot to update the hash of the license file. The license file change (detailed below) does not change the license terms of OpenSSH: --- output/build/openssh-9.0p1/LICENCE 2022-04-06 02:47:48.000000000 +0200 +++ output/build/openssh-9.1p1/LICENCE 2022-10-03 16:51:42.000000000 +0200 @@ -231,6 +231,7 @@ Eric P. Allman The Regents of the University of California Constantin S. Svintsoff + Kungliga Tekniska H??gskolan * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions Fixes: http://autobuild.buildroot.net/results/697cdcea128c3716c9ae81be6c97937ebd80a5da/ Signed-off-by: Thomas Petazzoni --- package/openssh/openssh.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/openssh/openssh.hash b/package/openssh/openssh.hash index 81cea32d2c..eefb11ec15 100644 --- a/package/openssh/openssh.hash +++ b/package/openssh/openssh.hash @@ -1,4 +1,4 @@ # From https://www.openssh.com/txt/release-9.1 (base64 encoded) sha256 19f85009c7e3e23787f0236fbb1578392ab4d4bf9f8ec5fe6bc1cd7e8bfdd288 openssh-9.1p1.tar.gz # Locally calculated -sha256 d6807e99f3d159145c659060f57c3fa74e109faa39326dbfc38674cb550fd104 LICENCE +sha256 05c30446ba738934b3f1efa965b454c122ca26cc4b268e5ae6843f58ccd1b16d LICENCE From ps.report at gmx.net Mon Oct 17 19:10:48 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Mon, 17 Oct 2022 21:10:48 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017073953.510219-1-luca.ceresoli@bootlin.com> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> Message-ID: <20221017211048.43d2394c@gmx.net> Hello Luca, *, On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > From: Luca Ceresoli > > This package fails building with a kernel >= 6.0 [0] due to internal API > changes [1]: > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > 709 | roam_info.channel = notify_channel; > | ^ > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > 710 | roam_info.bssid = cur_network->network.MacAddress; > | ^ > > There is currently no fix in the github repository, and it's probably not > worth fixing because, as the Config.in help text states: > > This is needed only for Linux kernels before 3.12. > Since 3.12, there is a (staging) driver in mainline, with a > similar codebase. Despite the buildroot help text the rtl8188eu code base is still maintained see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream versions tend to support different feature sets regarding IBSS and/or monitor mode etc. - not sure about this one but valid for some other rtlxxxx ones), Regards, Peter [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > is 4.9. > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > Cc: TIAN Yuanhao > Cc: Petr Vorel > Cc: Peter Seiderer > Cc: Heiko Thiery > Cc: William Wennerstr?m > Cc: Ezequiel Garcia > Cc: Bernd Kuhls > Signed-off-by: Luca Ceresoli > --- > DEVELOPERS | 1 - > package/Config.in | 1 - > package/rtl8188eu/Config.in | 21 --------------------- > package/rtl8188eu/rtl8188eu.hash | 3 --- > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > 5 files changed, 54 deletions(-) > delete mode 100644 package/rtl8188eu/Config.in > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef3d..b1e84edd5e9a 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > F: package/exim/ > F: package/libpjsip/ > F: package/qpid-proton/ > -F: package/rtl8188eu/ > F: package/snmppp/ > F: package/stm32flash/ > F: package/unzip/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97d3..d95a6ac4e3fb 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -573,7 +573,6 @@ endmenu > source "package/rpi-userland/Config.in" > source "package/rs485conf/Config.in" > source "package/rtc-tools/Config.in" > - source "package/rtl8188eu/Config.in" > source "package/rtl8189es/Config.in" > source "package/rtl8189fs/Config.in" > source "package/rtl8723bu/Config.in" > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > deleted file mode 100644 > index 76d90852976a..000000000000 > --- a/package/rtl8188eu/Config.in > +++ /dev/null > @@ -1,21 +0,0 @@ > -config BR2_PACKAGE_RTL8188EU > - bool "rtl8188eu" > - depends on !BR2_s390x > - depends on BR2_LINUX_KERNEL > - help > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. > - > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > - config option enabled. > - > - Note: this package needs a firmware loading mechanism to load > - the binary blob for the chip to work. > - > - https://github.com/lwfinger/rtl8188eu > - > -comment "rtl8188eu needs a Linux kernel to be built" > - depends on !BR2_s390x > - depends on !BR2_LINUX_KERNEL > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > deleted file mode 100644 > index 9c7f2de4b61e..000000000000 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ /dev/null > @@ -1,3 +0,0 @@ > -# Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > deleted file mode 100644 > index ebce4617ac5c..000000000000 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ /dev/null > @@ -1,28 +0,0 @@ > -################################################################################ > -# > -# rtl8188eu > -# > -################################################################################ > - > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > -RTL8188EU_LICENSE_FILES = COPYING > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > - > -define RTL8188EU_LINUX_CONFIG_FIXUPS > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > -endef > - > -define RTL8188EU_INSTALL_FIRMWARE > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > -endef > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > - > -$(eval $(kernel-module)) > -$(eval $(generic-package)) From yann.morin.1998 at free.fr Mon Oct 17 20:14:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 17 Oct 2022 22:14:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> Message-ID: <20221017201444.GE3666@scaer> Norbert, All, On 2022-10-17 18:49 +0200, Norbert Lange spake thusly: > Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > But so far, we do not have that technically better solution, so we need > > to fix things that are arctually broken. > I tried to bring that in for ages. Probably just have cooked up a patch instead. Indeed, with a patch to look at, it is easier to discuss. I've seen the files now, and indeed I remember I already saw something like that some time ago... I'll test it in our use-case @work tomorrow. Ultimately, I wonder if your solution could be an alternative to the var factory, rather than replace it. > I consider managing patch-series time consuming, so I'd like to discuss > the way this should be structured before. > This could be one completely separate package for example, allowing > different solutions. I am not sure separate packages in the way to go. If we were to do those various solutions in different pacakges, then we'd have to make it easy for users to use a package from their br2-external trees, which is not so nice. Also, see below: we already have a package where it is interesting to implement the systemd integration in Buildroot: skeleton-init-systemd. > > initrd is a blockdevice in memory. The filesystem one puts in there can > > be any filesystem that could be otherwise stored on another blockdevice. > > initramfs is a filesystem in memory, like a tmpfs. The initramfs is > > read-write. > Ok, I am using those pretty much interchangeable, > just some block you tell the bootloader to load, either cpio or filesystem. They are not the same thing at all, and they are not interchangeable; the underlying code is totally different. [--SNIP--] > > I'll be sure to do as unbiased a review as possible for your proposal > > when I see it. ;-) > Gonna take me few days. should be easy to test tough with the provided files, > just throw them into the buildroot filesystem overlay. > Helps if you make some assessment where they should fit. the > systemd package is already bloated enough. Yes, our systemd.mk is a bit bloated. What I'd like to do, is that the systemd integration at the package level is done in package/systemd/, while the choices we do in Buildroot, like using a var factory, calling systemd-tmpfiles, or using an overlayfs, etc... be done somewhere else. We have the merged-usr at the init level, and that is handled in the skeleton-init-systemd package, and the var factory is also handled there, so I started moving more stuff in there, like the systemd-tmpfiles call, because I don't see a better place. So, if you don't have a better idea, skeleton-init-systemd would be where we handle that. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From giulio.benetti at benettiengineering.com Mon Oct 17 20:18:04 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:18:04 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Message-ID: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1b60dbc11d..c102ddc911 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1154,6 +1154,7 @@ F: package/nfs-utils/ F: package/python-uvloop/ F: package/qt5/ F: package/rockchip-mali/ +F: package/rtl8188eu/ F: package/rtl8189es/ F: package/rtl8723bu/ F: package/rtl8723ds/ -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:18:03 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:18:03 +0200 Subject: [Buildroot] [PATCH 1/2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..1cad263ee3 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 2f333604b39745a003b4a3c87bda3adcc0efd68100dff4aa3b54ae7992fc0143 rtl8188eu-77c1b083c5eb8336a2381aee20add496d1c96b51.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..460bcba460 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = 77c1b083c5eb8336a2381aee20add496d1c96b51 RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:19:07 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:19:07 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: <1c48aafc-8a01-77d1-7728-db80e7acdfb3@benettiengineering.com> Hi Luca, Peter, All, On 17/10/22 21:10, Peter Seiderer wrote: > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > >> From: Luca Ceresoli >> >> This package fails building with a kernel >= 6.0 [0] due to internal API >> changes [1]: >> >> .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: >> ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? >> 709 | roam_info.channel = notify_channel; >> | ^ >> ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? >> 710 | roam_info.bssid = cur_network->network.MacAddress; >> | ^ >> >> There is currently no fix in the github repository, and it's probably not >> worth fixing because, as the Config.in help text states: >> >> This is needed only for Linux kernels before 3.12. >> Since 3.12, there is a (staging) driver in mainline, with a >> similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), I agree with Peter. There are other rtl* drivers that I've recently fixed by bumping or adding local patches that now are pending upstream: https://patchwork.ozlabs.org/project/buildroot/list/?series=&submitter=77479&state=*&q=rtl&archive=both&delegate= and I've also added myself to maintain them in Buildroot. I've just sent the patch for bumping it to latest version and another to add myself to the DEVELOPERS file as co-maintainer. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas > Regards, > Peter > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > >> >> Kernel 3.12 is 9 years old now, and the oldest kernel currently supported >> is 4.9. >> >> [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ >> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d >> >> Cc: TIAN Yuanhao >> Cc: Petr Vorel >> Cc: Peter Seiderer >> Cc: Heiko Thiery >> Cc: William Wennerstr?m >> Cc: Ezequiel Garcia >> Cc: Bernd Kuhls >> Signed-off-by: Luca Ceresoli >> --- >> DEVELOPERS | 1 - >> package/Config.in | 1 - >> package/rtl8188eu/Config.in | 21 --------------------- >> package/rtl8188eu/rtl8188eu.hash | 3 --- >> package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- >> 5 files changed, 54 deletions(-) >> delete mode 100644 package/rtl8188eu/Config.in >> delete mode 100644 package/rtl8188eu/rtl8188eu.hash >> delete mode 100644 package/rtl8188eu/rtl8188eu.mk >> >> diff --git a/DEVELOPERS b/DEVELOPERS >> index c0e6f8bbef3d..b1e84edd5e9a 100644 >> --- a/DEVELOPERS >> +++ b/DEVELOPERS >> @@ -1810,7 +1810,6 @@ F: package/agentpp/ >> F: package/exim/ >> F: package/libpjsip/ >> F: package/qpid-proton/ >> -F: package/rtl8188eu/ >> F: package/snmppp/ >> F: package/stm32flash/ >> F: package/unzip/ >> diff --git a/package/Config.in b/package/Config.in >> index e3a34d6e97d3..d95a6ac4e3fb 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -573,7 +573,6 @@ endmenu >> source "package/rpi-userland/Config.in" >> source "package/rs485conf/Config.in" >> source "package/rtc-tools/Config.in" >> - source "package/rtl8188eu/Config.in" >> source "package/rtl8189es/Config.in" >> source "package/rtl8189fs/Config.in" >> source "package/rtl8723bu/Config.in" >> diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in >> deleted file mode 100644 >> index 76d90852976a..000000000000 >> --- a/package/rtl8188eu/Config.in >> +++ /dev/null >> @@ -1,21 +0,0 @@ >> -config BR2_PACKAGE_RTL8188EU >> - bool "rtl8188eu" >> - depends on !BR2_s390x >> - depends on BR2_LINUX_KERNEL >> - help >> - A standalone driver for the RTL8188EU USB Wi-Fi adapter. >> - This is needed only for Linux kernels before 3.12. >> - Since 3.12, there is a (staging) driver in mainline, with a >> - similar codebase. >> - >> - Make sure your target kernel has the CONFIG_WIRELESS_EXT >> - config option enabled. >> - >> - Note: this package needs a firmware loading mechanism to load >> - the binary blob for the chip to work. >> - >> - https://github.com/lwfinger/rtl8188eu >> - >> -comment "rtl8188eu needs a Linux kernel to be built" >> - depends on !BR2_s390x >> - depends on !BR2_LINUX_KERNEL >> diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash >> deleted file mode 100644 >> index 9c7f2de4b61e..000000000000 >> --- a/package/rtl8188eu/rtl8188eu.hash >> +++ /dev/null >> @@ -1,3 +0,0 @@ >> -# Locally computed >> -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz >> -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING >> diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk >> deleted file mode 100644 >> index ebce4617ac5c..000000000000 >> --- a/package/rtl8188eu/rtl8188eu.mk >> +++ /dev/null >> @@ -1,28 +0,0 @@ >> -################################################################################ >> -# >> -# rtl8188eu >> -# >> -################################################################################ >> - >> -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 >> -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) >> -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) >> -RTL8188EU_LICENSE_FILES = COPYING >> -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m >> - >> -define RTL8188EU_LINUX_CONFIG_FIXUPS >> - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) >> - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) >> -endef >> - >> -define RTL8188EU_INSTALL_FIRMWARE >> - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ >> - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin >> -endef >> -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE >> - >> -$(eval $(kernel-module)) >> -$(eval $(generic-package)) > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Mon Oct 17 20:37:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 22:37:25 +0200 Subject: [Buildroot] [git commit] package/python-django: security bump to version 4.0.8 Message-ID: <20221017203747.E1B6586E92@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5b5d3befef9c92a7485c1c68989d95749882ee2a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ - CVE-2022-41323: Potential denial-of-service vulnerability in internationalized URLs (4.0.8) https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ Signed-off-by: Peter Korsgaard Signed-off-by: Thomas Petazzoni --- package/python-django/python-django.hash | 4 ++-- package/python-django/python-django.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-django/python-django.hash b/package/python-django/python-django.hash index bfc9219c7e..72adc30bb1 100644 --- a/package/python-django/python-django.hash +++ b/package/python-django/python-django.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/django/json -md5 ad4e850c7110a45a6c7778d5bd01b85e Django-4.0.6.tar.gz -sha256 a67a793ff6827fd373555537dca0da293a63a316fe34cb7f367f898ccca3c3ae Django-4.0.6.tar.gz +md5 75ec07b3e00c79fd6e67fbee53786b7a Django-4.0.8.tar.gz +sha256 07e6433f263c3839939cfabeb6d7557841e0419e47759a7b7d37f6d44d40adcb Django-4.0.8.tar.gz # Locally computed sha256 checksums sha256 b846415d1b514e9c1dff14a22deb906d794bc546ca6129f950a18cd091e2a669 LICENSE diff --git a/package/python-django/python-django.mk b/package/python-django/python-django.mk index d49c845d54..567d590f77 100644 --- a/package/python-django/python-django.mk +++ b/package/python-django/python-django.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_DJANGO_VERSION = 4.0.6 +PYTHON_DJANGO_VERSION = 4.0.8 PYTHON_DJANGO_SOURCE = Django-$(PYTHON_DJANGO_VERSION).tar.gz # The official Django site has an unpractical URL -PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/a4/17/b10aa26d7a566a3c19e9d29fac39c8643cbceb6cd7649a378d676839b5db +PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/1a/de/08d8a349ed0e3e1999eb86ae0347cc9eaf634cd65f1eb80b9387ac1dbe3c PYTHON_DJANGO_LICENSE = BSD-3-Clause PYTHON_DJANGO_LICENSE_FILES = LICENSE From giulio.benetti at benettiengineering.com Mon Oct 17 20:38:28 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:38:28 +0200 Subject: [Buildroot] [PATCH] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 Message-ID: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> Let's also drop local patch in favor of the upstream pending patch we already use for package rtl8189es to deal with endianness. Fixes: http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ Signed-off-by: Giulio Benetti --- ...TRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 +++++++++++++++++++ ...1-Makefile-remove-default-endianness.patch | 30 -------------- package/rtl8189fs/rtl8189fs.hash | 2 +- package/rtl8189fs/rtl8189fs.mk | 9 ++++- 4 files changed, 48 insertions(+), 33 deletions(-) create mode 100644 package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch delete mode 100644 package/rtl8189fs/0001-Makefile-remove-default-endianness.patch diff --git a/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch b/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch deleted file mode 100644 index 47e42415eb..0000000000 --- a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 480d9da302885d9e8b3d1f9c68def569e3c8a8c0 Mon Sep 17 00:00:00 2001 -From: Sergey Matyukevich -Date: Mon, 9 May 2022 00:17:21 +0300 -Subject: [PATCH] Makefile: remove default endianness - -There is no way to remove configuration options from EXTRA_CFLAGS -without editing Makefile. So default LE configuration can not be -conveniently replaced by BE. Remove default endianness from the -Makefile to enable its configuration via USER_EXTRA_CFLAGS. - -Signed-off-by: Sergey Matyukevich ---- - Makefile | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/Makefile b/Makefile -index dfca305..fde4e6b 100644 ---- a/Makefile -+++ b/Makefile -@@ -22,7 +22,6 @@ endif - - EXTRA_CFLAGS += -I$(src)/include - --EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN - EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT - - EXTRA_LDFLAGS += --strip-debug --- -2.35.1 - diff --git a/package/rtl8189fs/rtl8189fs.hash b/package/rtl8189fs/rtl8189fs.hash index d5d18a8ba8..1ab41db553 100644 --- a/package/rtl8189fs/rtl8189fs.hash +++ b/package/rtl8189fs/rtl8189fs.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 41eee18d8a4289c2eac07af3224c62214a9b694a717bf497cd34a95b955f3d49 rtl8189fs-94a61cbf46ce87b7c9b8aa53123aeb142133a3c9.tar.gz +sha256 7cc80cb85ed6e7f7d5480e6094c377d3dbcd18a57b58cfba43a7e42ea59fc8d3 rtl8189fs-c93cfd712a3acd2ecdeda19a66d269c20f8803f1.tar.gz diff --git a/package/rtl8189fs/rtl8189fs.mk b/package/rtl8189fs/rtl8189fs.mk index 1c398919ba..8b7618fcc8 100644 --- a/package/rtl8189fs/rtl8189fs.mk +++ b/package/rtl8189fs/rtl8189fs.mk @@ -4,15 +4,20 @@ # ################################################################################ -RTL8189FS_VERSION = 94a61cbf46ce87b7c9b8aa53123aeb142133a3c9 +RTL8189FS_VERSION = c93cfd712a3acd2ecdeda19a66d269c20f8803f1 RTL8189FS_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189FS_VERSION)) RTL8189FS_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189FS_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189FS_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189FS_MODULE_MAKE_OPTS = \ CONFIG_RTL8189FS=m \ KVER=$(LINUX_VERSION_PROBED) \ KSRC=$(LINUX_DIR) \ - USER_EXTRA_CFLAGS="-DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN" + USER_EXTRA_CFLAGS="$(RTL8189FS_USER_EXTRA_CLAGS)" define RTL8189FS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) -- 2.34.1 From giulio.benetti at benettiengineering.com Mon Oct 17 20:55:45 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 22:55:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> Message-ID: Pardon, I've checked better the commits and this version fixes build failure with Linux 6.0.0+ but it introduces a runtime bug by removing code for Linux versions < 6.0.0. So I need to send another patch with a previous commit SHA1 and create and send upstream a patch to fix the bug. Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas On 17/10/22 22:18, Giulio Benetti wrote: > Fixes: > http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > Signed-off-by: Giulio Benetti > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > index 9c7f2de4b6..1cad263ee3 100644 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ b/package/rtl8188eu/rtl8188eu.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > +sha256 2f333604b39745a003b4a3c87bda3adcc0efd68100dff4aa3b54ae7992fc0143 rtl8188eu-77c1b083c5eb8336a2381aee20add496d1c96b51.tar.gz > sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > index ebce4617ac..460bcba460 100644 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ b/package/rtl8188eu/rtl8188eu.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > +RTL8188EU_VERSION = 77c1b083c5eb8336a2381aee20add496d1c96b51 > RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > RTL8188EU_LICENSE_FILES = COPYING From giulio.benetti at benettiengineering.com Mon Oct 17 21:12:39 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 17 Oct 2022 23:12:39 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: References: Message-ID: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- V1->V2: * use specific upstream commit SHA1 since the latest is buggy --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..ff8c0a3418 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..99f8248c05 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 17 21:13:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 17 Oct 2022 23:13:08 +0200 Subject: [Buildroot] [PATCH] package/python-django: security bump to version 4.0.8 In-Reply-To: <20221017172918.1737004-1-peter@korsgaard.com> References: <20221017172918.1737004-1-peter@korsgaard.com> Message-ID: <20221017231308.04f97bda@windsurf> On Mon, 17 Oct 2022 19:29:17 +0200 Peter Korsgaard wrote: > Fixes the following security issues: > > - CVE-2022-36359: Potential reflected file download vulnerability in > FileResponse (4.0.7) > https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ > > - CVE-2022-41323: Potential denial-of-service vulnerability in > internationalized URLs (4.0.8) > https://www.djangoproject.com/weblog/2022/oct/04/security-releases/ > > Signed-off-by: Peter Korsgaard > --- > package/python-django/python-django.hash | 4 ++-- > package/python-django/python-django.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From petr.vorel at gmail.com Mon Oct 17 22:21:59 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:21:59 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: Hi all, [ Cc Larry, the maintainer of the downstream module fork ] On Mon, 17 Oct 2022 at 21:11, Peter Seiderer wrote: > > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > From: Luca Ceresoli > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > changes [1]: > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > 709 | roam_info.channel = notify_channel; > > | ^ > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > | ^ > > > > There is currently no fix in the github repository, and it's probably not > > worth fixing because, as the Config.in help text states: > > > > This is needed only for Linux kernels before 3.12. > > Since 3.12, there is a (staging) driver in mainline, with a > > similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), This downstream code also supports AP mode, which module in staging does not support. Given that Larry supports 6.0, I don't ack this change. I'll try to send update to 0a5e81555c5e9dc16030598d4e11f8f1dad541be soon. Kind regards, Petr > > Regards, > Peter > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > > > > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > > is 4.9. > > > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > > > Cc: TIAN Yuanhao > > Cc: Petr Vorel > > Cc: Peter Seiderer > > Cc: Heiko Thiery > > Cc: William Wennerstr?m > > Cc: Ezequiel Garcia > > Cc: Bernd Kuhls > > Signed-off-by: Luca Ceresoli > > --- > > DEVELOPERS | 1 - > > package/Config.in | 1 - > > package/rtl8188eu/Config.in | 21 --------------------- > > package/rtl8188eu/rtl8188eu.hash | 3 --- > > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > > 5 files changed, 54 deletions(-) > > delete mode 100644 package/rtl8188eu/Config.in > > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > index c0e6f8bbef3d..b1e84edd5e9a 100644 > > --- a/DEVELOPERS > > +++ b/DEVELOPERS > > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > > F: package/exim/ > > F: package/libpjsip/ > > F: package/qpid-proton/ > > -F: package/rtl8188eu/ > > F: package/snmppp/ > > F: package/stm32flash/ > > F: package/unzip/ > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97d3..d95a6ac4e3fb 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -573,7 +573,6 @@ endmenu > > source "package/rpi-userland/Config.in" > > source "package/rs485conf/Config.in" > > source "package/rtc-tools/Config.in" > > - source "package/rtl8188eu/Config.in" > > source "package/rtl8189es/Config.in" > > source "package/rtl8189fs/Config.in" > > source "package/rtl8723bu/Config.in" > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > > deleted file mode 100644 > > index 76d90852976a..000000000000 > > --- a/package/rtl8188eu/Config.in > > +++ /dev/null > > @@ -1,21 +0,0 @@ > > -config BR2_PACKAGE_RTL8188EU > > - bool "rtl8188eu" > > - depends on !BR2_s390x > > - depends on BR2_LINUX_KERNEL > > - help > > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > > - This is needed only for Linux kernels before 3.12. > > - Since 3.12, there is a (staging) driver in mainline, with a > > - similar codebase. > > - > > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > > - config option enabled. > > - > > - Note: this package needs a firmware loading mechanism to load > > - the binary blob for the chip to work. > > - > > - https://github.com/lwfinger/rtl8188eu > > - > > -comment "rtl8188eu needs a Linux kernel to be built" > > - depends on !BR2_s390x > > - depends on !BR2_LINUX_KERNEL > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > > deleted file mode 100644 > > index 9c7f2de4b61e..000000000000 > > --- a/package/rtl8188eu/rtl8188eu.hash > > +++ /dev/null > > @@ -1,3 +0,0 @@ > > -# Locally computed > > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > > deleted file mode 100644 > > index ebce4617ac5c..000000000000 > > --- a/package/rtl8188eu/rtl8188eu.mk > > +++ /dev/null > > @@ -1,28 +0,0 @@ > > -################################################################################ > > -# > > -# rtl8188eu > > -# > > -################################################################################ > > - > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > > -RTL8188EU_LICENSE_FILES = COPYING > > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > > - > > -define RTL8188EU_LINUX_CONFIG_FIXUPS > > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > > -endef > > - > > -define RTL8188EU_INSTALL_FIRMWARE > > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > > -endef > > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > > - > > -$(eval $(kernel-module)) > > -$(eval $(generic-package)) > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From petr.vorel at gmail.com Mon Oct 17 22:34:31 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:34:31 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: On Tue, 18 Oct 2022 at 00:21, Petr Vorel wrote: > > Hi all, > > [ Cc Larry, the maintainer of the downstream module fork ] > > On Mon, 17 Oct 2022 at 21:11, Peter Seiderer wrote: > > > > Hello Luca, *, > > > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > > > From: Luca Ceresoli > > > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > > changes [1]: > > > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > > 709 | roam_info.channel = notify_channel; > > > | ^ > > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > > | ^ > > > > > > There is currently no fix in the github repository, and it's probably not > > > worth fixing because, as the Config.in help text states: > > > > > > This is needed only for Linux kernels before 3.12. > > > Since 3.12, there is a (staging) driver in mainline, with a > > > similar codebase. > > > > Despite the buildroot help text the rtl8188eu code base is still maintained > > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > > versions tend to support different feature sets regarding IBSS and/or monitor > > mode etc. - not sure about this one but valid for some other rtlxxxx ones), > > This downstream code also supports AP mode, which module in staging > does not support. > Given that Larry supports 6.0, I don't ack this change. I'll try to > send update to 0a5e81555c5e9dc16030598d4e11f8f1dad541be soon. I see Giulio has reported the problem in upstream and send v2 patch to Buildroot => solved. Kind regards, Petr > > Kind regards, > Petr > > > > > Regards, > > Peter > > > > [2] https://github.com/lwfinger/rtl8188eu/commit/0a5e81555c5e9dc16030598d4e11f8f1dad541be > > > > > > > > > > Kernel 3.12 is 9 years old now, and the oldest kernel currently supported > > > is 4.9. > > > > > > [0] http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/include/net/cfg80211.h?id=efbabc11650040c64884ff3019b88c7bcc0ceb1d > > > > > > Cc: TIAN Yuanhao > > > Cc: Petr Vorel > > > Cc: Peter Seiderer > > > Cc: Heiko Thiery > > > Cc: William Wennerstr?m > > > Cc: Ezequiel Garcia > > > Cc: Bernd Kuhls > > > Signed-off-by: Luca Ceresoli > > > --- > > > DEVELOPERS | 1 - > > > package/Config.in | 1 - > > > package/rtl8188eu/Config.in | 21 --------------------- > > > package/rtl8188eu/rtl8188eu.hash | 3 --- > > > package/rtl8188eu/rtl8188eu.mk | 28 ---------------------------- > > > 5 files changed, 54 deletions(-) > > > delete mode 100644 package/rtl8188eu/Config.in > > > delete mode 100644 package/rtl8188eu/rtl8188eu.hash > > > delete mode 100644 package/rtl8188eu/rtl8188eu.mk > > > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > > index c0e6f8bbef3d..b1e84edd5e9a 100644 > > > --- a/DEVELOPERS > > > +++ b/DEVELOPERS > > > @@ -1810,7 +1810,6 @@ F: package/agentpp/ > > > F: package/exim/ > > > F: package/libpjsip/ > > > F: package/qpid-proton/ > > > -F: package/rtl8188eu/ > > > F: package/snmppp/ > > > F: package/stm32flash/ > > > F: package/unzip/ > > > diff --git a/package/Config.in b/package/Config.in > > > index e3a34d6e97d3..d95a6ac4e3fb 100644 > > > --- a/package/Config.in > > > +++ b/package/Config.in > > > @@ -573,7 +573,6 @@ endmenu > > > source "package/rpi-userland/Config.in" > > > source "package/rs485conf/Config.in" > > > source "package/rtc-tools/Config.in" > > > - source "package/rtl8188eu/Config.in" > > > source "package/rtl8189es/Config.in" > > > source "package/rtl8189fs/Config.in" > > > source "package/rtl8723bu/Config.in" > > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > > > deleted file mode 100644 > > > index 76d90852976a..000000000000 > > > --- a/package/rtl8188eu/Config.in > > > +++ /dev/null > > > @@ -1,21 +0,0 @@ > > > -config BR2_PACKAGE_RTL8188EU > > > - bool "rtl8188eu" > > > - depends on !BR2_s390x > > > - depends on BR2_LINUX_KERNEL > > > - help > > > - A standalone driver for the RTL8188EU USB Wi-Fi adapter. > > > - This is needed only for Linux kernels before 3.12. > > > - Since 3.12, there is a (staging) driver in mainline, with a > > > - similar codebase. > > > - > > > - Make sure your target kernel has the CONFIG_WIRELESS_EXT > > > - config option enabled. > > > - > > > - Note: this package needs a firmware loading mechanism to load > > > - the binary blob for the chip to work. > > > - > > > - https://github.com/lwfinger/rtl8188eu > > > - > > > -comment "rtl8188eu needs a Linux kernel to be built" > > > - depends on !BR2_s390x > > > - depends on !BR2_LINUX_KERNEL > > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > > > deleted file mode 100644 > > > index 9c7f2de4b61e..000000000000 > > > --- a/package/rtl8188eu/rtl8188eu.hash > > > +++ /dev/null > > > @@ -1,3 +0,0 @@ > > > -# Locally computed > > > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > > > -sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > > > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > > > deleted file mode 100644 > > > index ebce4617ac5c..000000000000 > > > --- a/package/rtl8188eu/rtl8188eu.mk > > > +++ /dev/null > > > @@ -1,28 +0,0 @@ > > > -################################################################################ > > > -# > > > -# rtl8188eu > > > -# > > > -################################################################################ > > > - > > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > > > -RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > > > -RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > > > -RTL8188EU_LICENSE_FILES = COPYING > > > -RTL8188EU_MODULE_MAKE_OPTS = CONFIG_RTL8188EU=m > > > - > > > -define RTL8188EU_LINUX_CONFIG_FIXUPS > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) > > > - $(call KCONFIG_ENABLE_OPT,CONFIG_USB) > > > -endef > > > - > > > -define RTL8188EU_INSTALL_FIRMWARE > > > - $(INSTALL) -D -m 644 $(@D)/rtl8188eufw.bin \ > > > - $(TARGET_DIR)/lib/firmware/rtlwifi/rtl8188eufw.bin > > > -endef > > > -RTL8188EU_POST_INSTALL_TARGET_HOOKS += RTL8188EU_INSTALL_FIRMWARE > > > - > > > -$(eval $(kernel-module)) > > > -$(eval $(generic-package)) > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From petr.vorel at gmail.com Mon Oct 17 22:36:43 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:36:43 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: Hi Giulio, all, Reviewed-by: Petr Vorel Kind regards, Petr From petr.vorel at gmail.com Mon Oct 17 22:39:04 2022 From: petr.vorel at gmail.com (Petr Vorel) Date: Tue, 18 Oct 2022 00:39:04 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: Hi Giulio, Thank you! Kind regards, Petr From james.hilliard1 at gmail.com Mon Oct 17 22:45:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 18:45:39 -0400 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-15 In-Reply-To: <20221017141843.0d7d2963@windsurf> References: <20221017141843.0d7d2963@windsurf> Message-ID: On Mon, Oct 17, 2022 at 8:18 AM Thomas Petazzoni wrote: > > Hello Paul, > > This is happening on James autobuilder, who has introduced some special > randomization stuff that would only appear with make 4.4. I have added > James in Cc so that he can comment and see if he can reproduce and > provide more details. This should fix it: https://github.com/viveris/uMTP-Responder/pull/85 > > Best regards, > > Thomas > > On Mon, 17 Oct 2022 12:18:20 +0100 > Paul Cercueil wrote: > > > Hi Thomas, > > > > I can't reproduce, with this build's defconfig on latest master. It > > just builds fine here. > > > > Cheers, > > -Paul > > > > > > Le dim., oct. 16 2022 at 05:38:19 -0000, Thomas Petazzoni > > a ?crit : > > > Hello, > > > > > > Autobuilder failures > > > ==================== > > > > > > Below is a list of build failures reported by the Buildroot > > > autobuilders > > > in relation to packages or CPU architectures you are in charge of. > > > Please help us improving the quality of Buildroot by investigating > > > those > > > build failures and sending patches to fix them. > > > > > > Results for the 'master' branch > > > ------------------------------- > > > > > > Build failures related to your packages: > > > > > > arch | reason | > > > url > > > -------------+--------------------------------+--------------------------------------------------------------------------------- > > > arm | umtprd-1.6.2 | > > > http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d > > > > > > > > > Thanks for your contribution to Buildroot! > > > > > > -- > > > http://autobuild.buildroot.net > > > > > > > > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From james.hilliard1 at gmail.com Tue Oct 18 03:46:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 17 Oct 2022 21:46:05 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-generic.mk: fix rule order for re{install, build, configure} Message-ID: <20221018034605.800593-1-james.hilliard1@gmail.com> These command rely on the clean operations being first so that the stamp files being deleted will rebuild the targets. The execution ordering of the clean and rebuild operations may change, for example if --shuffle=reversed is set. To ensure the evaluation order is always correct use double colon rules to make the evaluation order explicit as per make docs: The double-colon rules for a target are executed in the order they appear in the makefile. Signed-off-by: James Hilliard --- package/pkg-generic.mk | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk index f24e03a325..6cb461af90 100644 --- a/package/pkg-generic.mk +++ b/package/pkg-generic.mk @@ -1057,17 +1057,20 @@ endif rm -f $$($(2)_TARGET_INSTALL_IMAGES) rm -f $$($(2)_TARGET_INSTALL_HOST) -$(1)-reinstall: $(1)-clean-for-reinstall $(1) +$(1)-reinstall:: $(1)-clean-for-reinstall +$(1)-reinstall:: $(1) $(1)-clean-for-rebuild: $(1)-clean-for-reinstall rm -f $$($(2)_TARGET_BUILD) -$(1)-rebuild: $(1)-clean-for-rebuild $(1) +$(1)-rebuild:: $(1)-clean-for-rebuild +$(1)-rebuild:: $(1) $(1)-clean-for-reconfigure: $(1)-clean-for-rebuild rm -f $$($(2)_TARGET_CONFIGURE) -$(1)-reconfigure: $(1)-clean-for-reconfigure $(1) +$(1)-reconfigure:: $(1)-clean-for-reconfigure +$(1)-reconfigure:: $(1) # define the PKG variable for all targets, containing the # uppercase package variable prefix -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 18 05:43:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 18 Oct 2022 05:43:02 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-17 Message-ID: <20221018054308.D5A2F82F37@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-17 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 13 | 1 | 0 | 14 | 2022.08.x | 11 | 11 | 0 | 22 | master | 101 | 491 | 7 | 599 | Classification of failures by reason for master ----------------------------------------------- glibc-2.36-44-g2628500f5dff... | 29 bearssl-0.6 | 27 berkeleydb-5.3.28 | 26 ca-certificates-20211016 | 24 host-gcc-initial-11.3.0 | 20 crun-1.5 | 19 libnss-3.84 | 17 coremark-pro-1.1.2743 | 16 host-f2fs-tools-1.15.0 | 15 sysvinit-2.99 | 13 slang-2.3.2 | 11 host-binutils-2.38 | 10 xz-5.2.7 | 10 autofs-5.1.8 | 8 host-gcc-final-11.3.0 | 8 libarchive-3.6.1 | 7 linux-6.0.1 | 7 fbset-2.1 | 6 brltty | 5 btrfs-progs-5.16.2 | 5 efivar-38 | 5 freeradius-server-3.2.0 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 5 host-sentry-cli-1.59.0 | 5 libee-0.4.1 | 5 casync-4ad9bcb94bc83ff36cfc... | 4 dash-0.5.11.5 | 4 frotz-2.54 | 4 gpm-1.20.7 | 4 host-binutils-2.37 | 4 host-gcc-initial-12.2.0 | 4 host-rust-1.64.0 | 4 igd2-for-linux-2.1 | 4 musepack-r475 | 4 openssh-legal-info | 4 systemd-250.4 | 4 unknown | 4 dmraid-1.0.0.rc16-3 | 3 elfutils-0.186 | 3 flite-2.2 | 3 gerbera-1.10.0 | 3 host-riscv-isa-sim-1.1.0 | 3 libglib2-2.72.3 | 3 libgpg-error-1.45 | 3 libsvgtiny-ea9d99fc8b231c22... | 3 musl-1.2.3 | 3 python3-3.10.7 | 3 a10disp-0.6.1 | 2 batman-adv-2021.4 | 2 dieharder-3.31.1 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 gmrender-resurrect-0.1 | 2 gobject-introspection | 2 gobject-introspection-1.72.0 | 2 host-gauche-0.9.12 | 2 host-gcc-final-12.2.0 | 2 host-gcc-initial-10.4.0 | 2 host-vde2-2.3.2 | 2 libcurl-7.84.0 | 2 linux-5.10.145-cip17-rt7 | 2 linuxptp-3.1.1 | 2 mariadb-10.3.36 | 2 nanocom-1.0 | 2 ocf-linux-20171122 | 2 openswan-3.0.0 | 2 python-cryptography-38.0.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 aespipe-2.4f | 1 assimp-5.2.5 | 1 bat-0.19.0 | 1 botan-2.19.2 | 1 bullet-3.21 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 cryptodev-linux-1.12 | 1 dahdi-linux-5c840cf43838e06... | 1 edid-decode-188950472c19492... | 1 exempi-2.6.1 | 1 fftw-quad-3.3.8 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /tm... | 1 gitlab-runner-14.5.1 | 1 google-breakpad-c85eb4a59b6... | 1 gsl-2.6 | 1 host-berkeleydb-5.3.28 | 1 host-delve-1.8.0 | 1 host-gcc-final-10.4.0 | 1 host-gdb-arc-2020.09-releas... | 1 igh-ethercat-1.5.2 | 1 ipmitool-1_8_19 | 1 kexec-2.0.25 | 1 kmod-29 | 1 lcdproc-0.5.9 | 1 libgcrypt-1.10.1 | 1 libmdbx-0.11.12 | 1 libselinux-3.3 | 1 libuhttpd-3.14.1 | 1 lighttpd-1.4.67 | 1 linux-5.10.145-cip17 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 memcached-1.6.16 | 1 micropython-1.19.1 | 1 neard-0.18 | 1 ntpsec-1_2_1 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 opensbi-0.9 | 1 package/openssh/openssh.mk:... | 1 pcsc-lite-1.9.8 | 1 perl-5.34.1 | 1 postgresql-14.5 | 1 proxychains-ng-4.16 | 1 pv-1.6.20 | 1 reaver-1.6.6 | 1 rtl8188eu-903b6fcb821465fe9... | 1 rtl8821au-4235b0ec7d7220a63... | 1 sdl-1.2.15 | 1 sdl_mixer-d1725fcb7c4e987ae... | 1 sslh-1.22c | 1 sudo-1.9.11p2 | 1 trace-cmd-2.9.7 | 1 traceroute-2.1.0 | 1 tstools-08f6be304040e7b8476... | 1 uclibc-1.0.42 | 1 ulog-0389d243352255f6182326... | 1 xfsprogs-5.14.2 | 1 xserver_xorg-server-21.1.4 | 1 xxhash-0.8.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ccde8b572665b7706609de31f59b52bd76fda85f | sh4aeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/2aba72407c72d8b3542edc4197ac4dcf7715172c | sh4aeb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/15076cf6f0398300c4d61a999df5d865a9d4b39c | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1c7a230bbf49619a61e9ce5e48e5b88ccace61da | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/1432838e844f3f0138a22ab45c45db2b160cac80 | mipsel | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/a11147ca0c84658eaf7b7dadd5bf09755b31637e | mips64el | aespipe-2.4f | NOK | http://autobuild.buildroot.net/results/05854c018585f4e862ab4bd242e7ab8cef38fb27 | ORPH arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/6346b41000582126cfca9521b58930ae46544f1b | ORPH sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/dbd94b000ba0fdcd5ad659124e12c1ee7a26a68b | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b72b9b5edba27f4ef6b691d38dc8bb46860bce4d | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/31989a46d9b7d535000901fa7e420f5246647584 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/322421d68a57a6d2e485f090bd14616eb1e8d958 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d94ff1d28ed7d3d6395e3c00dad9a571f722b2f4 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/49cd6d3183b76c11241150144ee933b5c8aa3448 | arc | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/397c6a9a7b7919e14a4f4be4c75562533f987473 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d8925a2be31c64d2d07f1c32a831f7f13457fc89 | aarch64 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/e5c6bf2e05c5371fb3e33cbe9c258538873373fd | arm | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/35f2c14365d089611e0e279e55caa01493976ad9 | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/c2446ff26fb4322f95aa0df19aef98dbf60d78bf | sh4eb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/2ca4372000b8eaf73eee268f0016b460b64e0e76 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d7952b5e3ca7b4d42fa6bd0d1aed7cfe571e21d4 | powerpc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/09d7d7ec6e5104e2c16c60df4268cf282fd77054 | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/6bd8121e109e04a2e7f306c4ccfeff2296251caf | mips64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/73e33d68167e0a356e2859905354f92a051b3e1f | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0b5eedd43458e50c4cc5b9a9128c0a448150cce3 | riscv32 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/59e6d74b6c1464a10f14ce1fa095ea90aff6f912 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/8880f768a79e5dccc9725ee03e9478340d02bddf | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b795e04e4551b4c3078fb239d3122be93b379110 | nios2 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/aa1d507ffd97c588bad145b9c476ca0de5a1efdf | microblaze | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9d3f41c29c5a02d103fc9d8b3169f359cf40ad5b | arceb | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/e3f812c0fd943ca98901001958f9351b36c75b28 | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/90bb166570be3520f103347ef08998d2aad2973e | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/b59214833cd729ba3465caebab09323b4c8d0497 | mips64el | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/976fb63452021267bcb5f4aba45d4659abe079b2 | i686 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/50a4012050344df0533bc706a3d2132bec8d60b9 | arc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/04d01772dcdce014b5901740e890532f50911fd1 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/c84ef183be5d3b7468f9fc37e74bdebea177ca12 | powerpc64le | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/88550b540e087b6d36c9656696253d4cadd79866 | sparc64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/96b45bd89bbbb10b925db1d292c690c8cc7c57c9 | aarch64 | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/ad29e53e02cf2c3ff3ca6d2459f214895915e565 | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/adf3e9419d027c5eb11a30cc6e886c92aa58ea1d | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/9b7a06eecea0856fd211c30c4b8bea40d315f5cb | mipsel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/a1ef42018e817d1c96d294bab145b60f491fe0b7 | sparc | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/86e40f65b3c2d4c4b019e8320f0c5117847e256f | arm | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/d0568e07d19f3ccb31329ab12d260b096e6f776d | microblazeel | bearssl-0.6 | NOK | http://autobuild.buildroot.net/results/0bde18b907511bf08b5f023f5e37fd3b98e7daed | aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6e81a79739cd4dabaf82efa7e09594f0585ca5a8 | ORPH arceb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/784b7b4961057a57e1d1a7f83f8e546cb3d11fca | ORPH s390x | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/838398252d70c29dc7976783f81c7d1f6bec1e56 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f7ac9e2de616da98ad6a1ab32ca4adc9c2cc7976 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2700ca6862d431e8ef5970a09c459569cb2d68a8 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/2548d4d63fee0489916fd25ae4aabdaa243c0a81 | ORPH aarch64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7cd30625555a2cf7ed9a0eebee51d2cbf78efc8d | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/01aace8f3d420392b14f416227558466fa4a0dc0 | ORPH mips | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/91a74eaf16e085c9e2a31c1b17db8010f0bc2520 | ORPH microblaze | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/460438a98eaadfb49de4dd0d2e2b4ee1fc536de7 | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/da15b83bd23715670e3e2436d8b99f9a4621b066 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d1b98fc17fbdf91e81bee445dafa2fc73435384f | ORPH microblazeel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/158e62067f51bab374264a3f45069db99a053755 | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/7d7015a51d7d49f8941c10c7c1cca371868b0ccd | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c57b8b6bea92def75e3684d4f08191376f457f17 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/119a571dead6d51f9d073a37f533a4e099ddab69 | ORPH mips64 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/5e34f072da78bc4406be617d56d5d9f5a3f89a9f | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/0dd5e0cef4e0b6c6fa4bc11d633c384bdc333be6 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/83185e407dec41e75cba9ed05474c45652736209 | ORPH armeb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a74620095658e27cba8ac5ba82e95e67181a0d4b | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/6aa53cc38c2a7bcb1389697bd19c22285a44225c | ORPH xtensa | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/a4b2117b5060137680e2898d4820b2cace480be6 | ORPH sh4eb | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/3d199c1e104408ed82749def2acfa6ae136a28e4 | ORPH powerpc64le | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/c3586f81409b3ffbc270937273930c4cf65f1d6a | ORPH aarch64_be | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/729121352d2207d769dc47eef8570703cd397a46 | ORPH mipsel | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/8e1105ef45ad848b20c5bddd78b6168ecd46f62e | ORPH i686 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/8f46b301d0403fc4d1e5e2707254f37229492b9c | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/ccde49c55331dad1b4d7b3bc61997385662b1417 | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/2d9e2bfa9eb727c77d3234873867eb13deffee62 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/327c191aeaa39452daf602c4ff07c923d5c58e5e | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/76c712692f79cf78ccc8a984674c5bce0b43bea4 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/df55617b51c206030d2b259353ac02e57c7b2a31 | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/de1dbb02b5e2dbd6e5a2fbe959f3868be264dd30 | ORPH mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/68a9bc79ee6cab9830003bb1c9bd03a4f5148c77 | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/56470e894fe8bd43c4aacbabef31929f61653b64 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/27e4b79a21c13c07139ae79ebe3212d74e5ba499 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dc1e6019ae96e20a9e2df46b90fd1122a622be32 | ORPH arm | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/654cf31016d9bdd6cf40c882494fd56f2a1a9c8a | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/764983ca58cf57acf551c09f16773f6a7deb988a | m68k | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/646add5c8c5c3f423567f094403e3b2c21b59b28 | aarch64_be | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b1568e10ce5dc994065e7b7c2ca0bf2f39134982 | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/765dafc414910ffca88d52b794d0b7ee72126c13 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/2627cddf6323010d5a67d533583e9ab4bb2817c0 | aarch64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/913bf43bb055101abee7b4b3e6a41233427bbdcd | arm | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3c28c916109d0d7e75ffd26da2396c9c9aef13d1 | xtensa | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/5f5ef166df1094dafa8116403f9219e2c4516719 | mips64el | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/89b5217070ac8fad3a8b6b650106c4f4e186359f | s390x | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/9dfa3a69a175fe11763827287aadb81d0c243fc9 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/ff971a0420357035b2f1d7c295c79393a6939dad | riscv32 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3284017d23814bbe2ff2b6fcf4e498213ec49395 | sparc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/43959de9bc152da4871e80db4000271e3336a3d0 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/186536583c6e9d80cdf29e70a779188482e6331c | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/eb07de9f285816b91cd1d81fede736579dc87240 | mipsel | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/fc524dc2dce2eddf29fba1325025fae320013ddf | sparc64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/6ace158836455f9d83f0369ee83713b1f179d3b1 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/3654ce570db6fad2b3ef37ba768e824137abff76 | riscv32 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/c7651be55ea276fbaf6d950f478ca6d5fb881724 | microblaze | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/12ceddf332b88af50cfacb648f63dc5d008931cb | powerpc | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/b215ce31bf281d3cc38dc5e6266c8b97f5a8c8f3 | mips64 | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/a60925489dd4f6586740282d671da6a2f0991b5c | mips | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/30ca9037014f83a39120639897d014ce471a6842 | powerpc64le | ca-certificates-20211016 | NOK | http://autobuild.buildroot.net/results/db747fc2af7999fd724d0a4bdb0135d766d15451 | or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/adbe409bb7be953be0dc1d7f92ddc6476f4dac87 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/20da34e901aa48be326e048f862e25f2dc04fdfc | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/eb216af55e4c123f77e13ab41174d2f5b7a90668 | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/02c643bcded168e46363681279250853b4960105 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/7d10b124a6348b88eb37679be2d55f4a90577cd4 | sh4a | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/caee1ee0625c9aa691edb97c03e50123eb4611e7 | ORPH xtensa | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/5dcf26c4f5b5af20667b632c06fba5ae8ac30ff1 | aarch64_be | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/572b727121e3d3bba7905d7babaee6e72997ec5c | sh4 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/e00b09c80ebd05c75908dfe2126612fedbea0227 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/0ef82a3e69821751df51cf56e0dae3819244b7ef | mips | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/4ab521ac4cb2c9316826e999e977841e4b6f0c45 | s390x | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/8205454645cd291cfa10a69fa624638a5d0cf040 | aarch64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/a5aa7e5df05a5ad57955cfdca25903944eef6d52 | sparc64 | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/2bae52d42b8fd6b57ac7772e4068591068c8acc0 | sh4aeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f8c58b3d68e2ba161a9485201fe723b73d776fe4 | sh4a | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/647eec840e2e9afdb6ac3e2907a0b5c081cabbbb | microblaze | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/38c816bd9944de1a39e3e1723219e4c87b5cf617 | arm | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/1756b7bfcabfdfa5ba54e165f7d956ac414d9f77 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/44741c0ea5a98c8e00aa9e0141b1145c21887575 | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f4b093bf99dfd732f2400b0cbf9bf1ea38ec82fb | armeb | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/7b46923272bbccf21c530041c78c6d8469271bf3 | arc | coremark-pro-1.1.2743 | NOK | http://autobuild.buildroot.net/results/f669b69cc9ec9262e611b40d78423df4d512627d | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bc4f4688c5c39288443c5048f9ebb893477ecb30 | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9d1794ec2aefc0f3129aaad016e0813ee8c3e9e1 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/79fd95e17abde9522c9693351023708235796a51 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5248df36f96c177e52586757b1a2af22f5d0c716 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c295f18720129e04878f63f1f1e7c77f82075c11 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/680fcf46a4b1d41050d28c5caf0097d988d21435 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/26ed2a35d789e9024e52b600e4f37bc02424f8d1 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/08ed63c69a1e9090b7ec5413254b2c281da6d02e | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0570c10c25c015ebceacbf81ffc72a6894a9aa4 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b1be0d6082ef3561cf7eeffb045504f3299edad1 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a024920a63fa182dbde0ee6a0cabdc8c3c68c49 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d6a090998a52b9e0c9607d1cd037fa28bb471348 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/40673369babb97d9254b59ef0c90c198bfad57ab | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ccaaae720829342bdaab00e4c6fdb81aa9c8eede | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b75e9a00e37339bab4e78b7fbbc77e0d34e6ff6c | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/084063429080229f466b78c77cb42c1c6c924b06 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8f98716d9c61dc91cf0fd61eb7c9a3f734aa812b | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cd39689beb38203c1fd76aba847ae76fe3ccac57 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d3ecdd1b92a7042a9b275d02e9d337b92eab2764 | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/dec4d7e1748ee62f2c11df2f3f5cf404ed315502 | ORPH powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5a586b13a086f03e0c43f738ea1d0240ff544457 | or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/9b1c5b96c1da8c7a2f91913f1db406c1222bc108 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e4336a800e700f090049042f39dfd46ff417b6d | ORPH microblazeel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d94b04dae7e087c11b30fef8e5f77d42dc2f3ac5 | ORPH microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/61c8a6afce5d7662cf512072fb897d540e176fbf | ORPH powerpc64 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/4381fa03d0812bbc12c5b00d411016cc069540a8 | riscv32 | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/be8273de61f05b0d03737345a3d4f818417c01d5 | mipsel | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/970fe77f299a6f1ab43601cb9f814a76df586407 | ORPH mips64el | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/089748114d0fff3f2ccf04451a89d1af33c4a883 | ORPH arceb | dmraid-1.0.0.rc16-3 | NOK | http://autobuild.buildroot.net/results/5564b40d0fef4cb10a7c9283796233322e8e160c | ORPH riscv64 | edid-decode-188950472c19492... | NOK | http://autobuild.buildroot.net/results/1691e2b6f2c813acd30d2f7bd0390ba57e1ec388 | ORPH x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/00f675184b2ff44f98e5c9c43a077e6802f04cd4 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/aeead2e53a7908124e6e65ccaa03c4b7bad99cc1 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/560053295dcb29177ac904e14d6511f7cd67e02e | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/117c95e7fb4919902ba3c97bd1cfd6428d10f879 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/03dc08172077d66feb57231a77d69e10f5153620 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/c23f14e967752a598caadc269b8acbd99d97df3b | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/e78a7a8dbd55d1701152349cf15a753b58556049 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/2ff3047d4f0d5418d85a344b1cea186a200e9f6a | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3cad876bc64afd7cd3d497dfdc0499e05ad6f76b | nios2 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/caf8cc20cc3d702ce12e45a85dd9b92d811fd146 | ORPH or1k | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/7ffbfc40c55a32f699ba1574cfb987a73022220d | ORPH riscv32 | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/5c18b2b3c876879bbdfb737c107482b85dfd7543 | ORPH arm | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/8abeca7a81aa536e4797f369e1efe5ebaf7aeb03 | ORPH arceb | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/45d03a7f2065212cd939a52074f139230d803002 | ORPH sparc | fbset-2.1 | NOK | http://autobuild.buildroot.net/results/54f0ea2264264eb98b8bfd7e8549c938feb928e6 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/aae47543c3683fa4d491f61e1756b0ed8f6cdfef | ORPH aarch64_be | flite-2.2 | NOK | http://autobuild.buildroot.net/results/6c8b17887e1f067a69ef06ec413be5ab2b581211 | mips64 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/4db00cfd5fd29d57a755ce8ec064124df55fb0e1 | nios2 | flite-2.2 | NOK | http://autobuild.buildroot.net/results/e4e47a55293e26812d0cd582d11ca5abb7767dbc | aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/eafc7b5556d9c24957cadbfc2b7554f2f924798e | powerpc64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b2c5f723047d8d7d4ed8cade3c57860b0a270c91 | mips64el | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/18bbe5b17004db7109c66944866060a70fb515b9 | powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/1af82902387d96cbbffa55d5be78b237a197944f | aarch64_be | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/acb42b2e673e7c590b5d97cd9c5dc31ac897097e | s390x | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/b1c140c9d61f707fc36c2cbbe8e741c58753e836 | xtensa | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/9c17eab18085fcf30fa2ec3e9afff059af46c865 | riscv32 | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/76896ac2e4f0e1001705836d0bf00debe5894e14 | mipsel | frotz-2.54 | NOK | http://autobuild.buildroot.net/results/ba20a37bb001045d1df647ef7e0904f4aafc7752 | powerpc | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/19b34a119d05ea851470d7440205c3cc0936b9aa | arc | fs/cramfs/cramfs.mk:46: /tm... | NOK | http://autobuild.buildroot.net/results/034b43b07b0f28648d785fc21554b786a2424b55 | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/1a61540725a26b62c81a79e03f75237b334b92a1 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/4625d56a9e20b1cd7f11b7bb6b0c6a239669effa | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0f8c05661f3f27351a1ea28eebdee7242e7a44e6 | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/721a0d8f534c63d4211e53afe261a7984ed9f511 | mips64el | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/292b926b2ac46507fd1f4b9158c6f7939dd4e712 | i686 | gitlab-runner-14.5.1 | NOK | http://autobuild.buildroot.net/results/99996e8e685a965002076296ef727c107d09fbca | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3f0743377f0bc52d88af6c62ecef622bfff44e48 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9d75fec6fb7c83be84275c785c03b1cf59a5c981 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/96716ce0d2ca5b1543bd1539ec2e726e837389a1 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a1680631301fcc0a94a3f1e29c40982c140e7865 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/98c0a0ad5c0e850eba958cf0752b8474894a8ab9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b8a047e5de255dce193d9ba6f41caf016480c524 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/080b4ce2bcfb0434dc5ebdf0cbd77f58b855f573 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5deaa7ba3ee50034e4e574d4be35dd3546f53df4 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a8de14be47f388934c1712b343a1631b69899ba2 | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c1b6303b3a92291e16a446f992428cd149d2de2 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b642d6ec95de3e9499c5305873c844715bee2f8 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/23f623f5fafbba5fb3d5129d9e3cd8c409f9547a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ca7fd069a67097e456257e91ec08bb9c1e8b049a | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2ab8ec24e1ac36b4511906ff9295a429ef115e5e | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6e84a51bf559ece8ed9f26e2114be6149eefe4ee | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b7aa8c9a8596afcbee8a4a0f63137410b85ef0e5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ac4e5aee75ccd1ed63912aa9bc4071edca5cb5f9 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/444d9b174fc9041fdeda460bd075c7a268c48444 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/70efa1adb476228715577a3f7ac95b661c1f8fa1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/34c9ef1ad7cff93881dcf3a796f05f27ec7806ff | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9113039dcc63ad938f0f5a8ddedc996606f47229 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d0522c67f9dcd9f6b11ce1ef9562a10ba251a196 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/809a80a459799b42ad3a9d6dcbdb6e7b381fe387 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1f03b3be4ee989446e91376487b6b1408ac7c7f5 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b637f9bb6785eeb9be24f8326ff4e88a7766b3be | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b5e08309300dd2d18a061e768f540c27a6cb7687 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5a9b7dba2671de705f678d6251675f1b2ca49c2 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc723732fc974a71da0afab281d186410e8ca137 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ec7fa06ec2052baf392bd06e389ab75a54a65656 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/9c1715e186676d5e29b771c6b7b7cb91a7b89eba | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/8397b7229c7dad785f92a4f7d07666cde873fefd | ORPH arm | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/2c4c967a5bf06203a5a872381133a9edaf33c495 | microblazeel | gmrender-resurrect-0.1 | NOK | http://autobuild.buildroot.net/results/f1468e2f3fb183b8ba72cc0cd7b5b87877c98a15 | microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/5bbb9b03ceb450d5d19202d4a0087213894ff8e2 | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d77850839d22477c1f36c70a91f271345743cc97 | nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/bc19f818197c25de6a127fbd948fd5c4bcc8031d | ORPH mipsel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c1ca46c66d24f021ceb601a04f2bb151339356fb | ORPH mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/dcfaa5ac532a96a02f5471f02ad8e44b2a67f2a8 | armeb | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/08dc3658254b1f367b0d84ef48d8eac461ca93d8 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/319c7d97c5f6b86d8bd4cd03087a429c1f40576d | sh4 | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/347e509cd70438113dd636d9294a9263c7e5a1f2 | mips64el | gpm-1.20.7 | NOK | http://autobuild.buildroot.net/results/6dba98ea2c24827992bce41427cb6f327acb90c9 | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/5dbfc34299c8c87af56d390ba2c130cb378f5ee2 | ORPH powerpc64le | host-berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/bfac7a59c50d74f9f69ab11392bd2b1fddf03cef | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/89458004a87d1ea543c9329d4e524bc684cfb0ca | mips64el | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/6adfa63b0b1a3f04741ab0e024b961bc73b89566 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e862073cb7af1023a3e01fea4a23b6bfba61b6b8 | aarch64_be | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/9a4c7232a9c3e98dff62d1a0a21b98302f76d559 | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7f7c37cd8babfa8e8dbed5ae82c79f52fae2f4f1 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/747d885fe8652ef59f0f051e8a6fdc907f7e7a1d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/90ee1cf2b90c2e94ac2e5f0f412c12da20dfccf7 | powerpc64le | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bc299d29a628c0ea97a095af3115e1a3e5c32206 | arceb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b5cdde4c913fc904b88175dd80d9e14201d2599 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/cf66d4924ffc2402e5bdbbcd39ce0f6582d2d4f7 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ebe966b557ac3a73076666e5bfad396065700140 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/691febc93c5e906fbdb106142c9fdb851554e2e0 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e6902c1a17f88c7b9f00caa6a0f6466bc00d646a | nios2 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2ca48d0eb17e6aa7be090a4f9afe69066c5f073a | mips64el | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/9a15100cdb71e99d46975ef4c0aba0e285b96d5c | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ae67954a79fe2e247b7633d86ec37d5b172ae010 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8f3f545dab08571b0c42986ddef8732222603fd4 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2c011e3a951d26fd3e188f3b55daac4c6105750d | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cbbb7d06a47030d536cc8c3a0346f0b75925d0b9 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/72d1ae56b67a32accfb9b70ad62b6703fb52ff65 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4bc6cbfab7ac8f5c757386554a0a4e0edd28397e | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a43224b9e9f0c80cbe48ccef8ae9c620f6844a65 | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cee8284496acd2a9d1809a7e82ca946795e6ad7c | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f22fd4d967bb4c52adf94564da3809495d7ac5c5 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f117dcf5d83c7f120aa97affbbdcebda577b7492 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f2aca8ac27aaf55f69cfd0ea7ca74453645148ac | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b990fd917da900e98d77debf16f9cc6de779f313 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b34f6a12cac944da7cd2e59a4c2d5179c77f7392 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6bee7e8318aef6147456062731a7221d173d5bd4 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/06fb6322af092438022be829bd06cb2684d7f1fb | mips64 | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/25f601a2eb6486ce824a5a4d7d739a4fe328d03b | powerpc | host-gauche-0.9.12 | NOK | http://autobuild.buildroot.net/results/ac1b850f3aff9e6e247901f0719052d37ba7ba98 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/611c0038673fe8ed274c007e7cca955431bc3594 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eaba79a273834b7d7833d64b829ed47b55eb5b8a | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/ede2a763def116ec39a55e280bbc3191fed14567 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e9c49426cbdfd9d048490374ab44919d8a6d671e | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/254b98e459d5043a859982b171d378182c139f59 | i686 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f32d8a65c8e001c0af61dd31ab984c4b1fc8f25 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6ceeec25350bdd7386f47519a7449ff3612698e8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/701cc3a3613c2c1785862903747dd49cc0c3b0d3 | mips | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/52480cff54459df6b20d9329012047b9d4ea3480 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/2a2534fc99bfc641ef53df5a27d0e39590ecd732 | x86_64 | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/4f4ebd14d8c297fbdbff3fb8485172711bcde56d | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/31f11b497ad0d329db9ce51074afdc3a9320e93c | i686 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/9daa82e084433fe71a10d8bb528e681bcb08b4fe | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/931a567a44a12eda2a49ab0e3bad899bf46dbc3d | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/520087dfeaf68bc178ec01f59f96298733c23e67 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/6cfc84d81e46765970f29116d81ea1500000079d | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1fed9ab739e67007c663b795b48c3a8b13a14ae8 | i586 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a20b5b57d64ff944ae80a57ba68c9c0414fbbdf6 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/50dbcb381975b6ed80e96ae552a0039e5fc36632 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c2917c027ed2ba16fd77278757981452cfafad5e | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/03cb39500d5f94f7bd22ebb86c9ff748ca54653a | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c072d9951f60761239ab0e91f9fffa9c74c04a47 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/90b0d41707409cb261b280e66460895b625485c5 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/ee92f15208d040e0e3a6d595646eba2f886cb4d1 | i686 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/3fdc604b906ef4b30d2a3eb7193c031e47eb529c | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/f61011e273b5bbf84d57867b9f6be2958b583814 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/faeb0bfe9a59007a5b691817ad6038d3d8e59057 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/b55a2bc7cfbb50cb33c2d0f4ee83882ac67e9365 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/0fabc060e2902e1661f354e24364b90deaa33025 | i486 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/24fe9aa5521646649dc2c4a08a7b744c4a3e9ef9 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/1c0862cad1f0dfa85267128283e44d85cb05aab1 | x86_64 | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/50202e5e1ca2c09be1257682d6e3656371885480 | powerpc64le | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/c1c7a9f153c4e0edc41acf4e8947544fd2f64a1a | i586 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/a482398dbdfda6ac62e651d1953ca19e86b062c2 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/53797681f1a77d640c7b1eab68566a1b5100bd27 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/0a13b252c667b6008e50a978e9cbd526ca6988b1 | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/e96445404d27d7b2288d16121252e0e836b6eb54 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/95f45e1da4cb57945b79d14817ff6b159f2026c6 | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/be1f025a22d253f6afcdc6c74d9b531a0ee1d048 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/feaa4fc4b3b5086a5c36ade49a9a7636acc6010b | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a6f2a3c68a4d78abe6b9fb3a92f63a6bdcf21258 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/15739067ba9cc8fa7fe6374ea5521e37468059d8 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/a3fc00d2b82e4c0d598afb4010726d024f475113 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f14a82ffe106b2822957a8ddb8db76802a3a7959 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ff369eef7cd30d9865e19cc62fa66279fd9e40e1 | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/c382e745dca8c96d846f1cc6fcbafbf005c8254d | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5dce7d57c113ef4926e8577180875e5f1dbb901e | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ad7ec5a4ec612868958d22e889f4a9d037bcf87c | arc | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/f3cd2d4da199475f2d7922ffece36b1021509bfd | microblazeel | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/c95c27a8d6868f6eff61d2b31afa0e5261303de6 | riscv32 | host-riscv-isa-sim-1.1.0 | NOK | http://autobuild.buildroot.net/results/4ae8eba3d06cd8ba7705bddd3c44facbfe58f273 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/78ab32fcd16bc41d5d029404f9a5713567513d7d | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/b681bf164f440e5ddc9c59a152eff0aabbc70365 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9b11784506dfb6337d09f7fab5726ecf8a8d28c1 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f51380cfba08462a7b50542e08c7f78b9f47805c | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b57d2e98cbd5ea112cd58d0cd7cd3b1b9054e5af | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6a713c772580952ea1a96cd3b449a9675892d699 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/466af2806bbc3394ccd2ad566e1142dc367520c7 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e7ee3d3db08dd315fe16bf6759e03b1d97f27193 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9c00b055f388d0eabc7231994103e0d7f10f132e | xtensa | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/23e0698570bcf23d8dad1780eea766c7d854c55a | sparc64 | host-vde2-2.3.2 | NOK | http://autobuild.buildroot.net/results/cdda25021ff5d3660d5742d6c3ece5883b66835c | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c416a6f700d72a023c13e0aefb9a7765acb4f063 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/83491dc6df40aa77332c52e457c5aabfac4d7104 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/2393b07bd5c5f03451c4d064e0faa3f007e1762b | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b2ec380a0fe4fc0d1d8f6fe5bfd9b689b5340815 | riscv64 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/c842aa11250870eab55543faf3cf166d7dd66186 | sparc | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/da0ba97e91a426637a429c07110c1a78b47f550a | arm | kexec-2.0.25 | NOK | http://autobuild.buildroot.net/results/7311d7959209078b719375ae05da98311d05ff42 | ORPH xtensa | kmod-29 | NOK | http://autobuild.buildroot.net/results/ee0586b02d0669fedd65df5e8faea5b9261dbf26 | sparc64 | lcdproc-0.5.9 | NOK | http://autobuild.buildroot.net/results/588fb82780e918724ba8fe561965ac9539058ee3 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5223e7326b6a967c8dbc4d266372e437f2c58c69 | riscv32 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9f1bd06d80ddebcd5445905bfe648057bb639573 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/89f0f7e29686f301c5f48d84ebfc2fd1bf12d501 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/be2db5a6fc2cc674b7942d5ea410fc01fff36172 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5a18b5a12cba34a7b92c0c48e5c388925a2324db | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a3262669f0c1b9d2233f3453153460229363809e | mips64el | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/772d90a11b593c157073469361cfe2342b9186b7 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/9c22decedccb1e5afc2941a9f2ad60b00b3881da | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6e03ec16cb42b85a9bb0cbde36242cf39d68de02 | powerpc | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/17b1a72840f6faee07f6cf60aa0dce0891c0d0b4 | arceb | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/d8ac678d2705f81e8afa574dfdcfa36f0d643402 | microblazeel | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/ed64629e4a84540a3bbb499de588a335a58d2ccf | riscv32 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/18fa55ed3ab5c0105a7a5f3423b493498af67a45 | aarch64 | libee-0.4.1 | NOK | http://autobuild.buildroot.net/results/324ce32bbadccd79ebbb91f018960ec3b0395c1b | arm | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/960938d34d7c652998d59c3abd68462be05b850f | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9469b32858e5dd0621ab9562887115a423d3d2c0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/07ea9e984e0cb6c41f29d11e5d12126b362cce93 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4ca44ce6e8399ae49a5f591c282d5aa4ba911bb1 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/b303d596a87bc981a7d238bc319cdd799e1243f9 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/456696ed86adaec34aa3020d0dbf22c9c6d8aa74 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6be838ae5482cd70dd0a2f6991a2dd9c58985c42 | ORPH or1k | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/5b7fa9f5c1e2db0c1de9669d4c675201776d8d53 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8110ef20f2800b52bf38725e8163763c6e33b322 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87f76a410407b3d390e00bf56cf278c645099464 | xtensa | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/515ad0923b61ac1d31fe94d8b1df57cfd81d514e | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f881de15fdb3791da15d49acbd83626a0937e606 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4335d0d8454035a8f74645ba8d6c2329ab2e5480 | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c5b029195de2422d1b1ab54613f7ee57ee49debc | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3288e2795e1ef06bf3294ab14e3cf8ca2a019240 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5263940f97f91cc0ba043c6e0eec4dc66a72309f | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c2c3f09e89c95ea47a1d975723247dcb58b5b3cc | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/52f04375b6e0f6a5e5743ff6b688942f343bb503 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/450d7a0278394dbf61454d15fb622265ee7c0177 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/53133870543b7727c4e5814773e42b49d53d5edf | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/db9a85f8f902aac41c27303506e0529e59d1a391 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/35bde8bc36ebfdc45ddb218f654178ddad8330d1 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/245ef91350180f3a89125c4c8dd19d8fc535379b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/46547379ada30a74694d2b100b790714ac9d5361 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3b1305c39910e7d55c02a9f249a5eed0d5a0848d | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/1ee6d81286ab91c97d39e9ddbd0c5af7180b6527 | sparc | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/82422df9f99e0604474e35dada2f8937066f5f5d | ORPH riscv32 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/fb4add9ab9a8d508e8a66e29a1b424e97becaaf2 | ORPH sh4 | libsvgtiny-ea9d99fc8b231c22... | NOK | http://autobuild.buildroot.net/results/3f6b4e2d796c3181e3fd795f77bb0829bbcc9202 | ORPH powerpc64 | libuhttpd-3.14.1 | NOK | http://autobuild.buildroot.net/results/e448ca55eba195cfd54f1bebdb92bebc6078d525 | arceb | lighttpd-1.4.67 | NOK | http://autobuild.buildroot.net/results/777ab55a58c92005e43177d5f76b39a3c0c75cd6 | aarch64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/c57005cf8d1ce7fcaea927e8365da3993231089b | ORPH powerpc64le | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/cab10c07ecaad69b939182c0659b1b9b8b517856 | ORPH riscv64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/7a96737e37c0e9d5c38bf98a395606563b35730c | ORPH sparc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/be3749f6f8a66e10672765b4dcb757bc9f0a2e2d | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e41c0fc65e1bdcf6edfeeef49dd790cbc862b49a | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7c3356ae2a6546d87fd3bc95ac77632b4bee2c07 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/62e517581cc723d087a8ac98481b95304256f51c | ORPH arceb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f7cd4a117435f3cd3fbf0d011678171cfcc54f43 | ORPH aarch64_be | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/18297ae062ed5084327def6dcfed4856d5fa6c4b | ORPH arceb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d630c31c33b4e58c0ab4d1e19728f069c697dd68 | ORPH s390x | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/1d678e28059511c7b69a0922f22ed887f2a1a3a1 | ORPH mips64 | linux-tools | NOK | http://autobuild.buildroot.net/results/5d9fcff561f0c87b9c3052f3386092d7e670c06e | ORPH sh4a | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/743711bfddd3dacc0838fa0a8a89bc46d1a3911a | powerpc64le | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3d0b104088dc3cad55d345afc849c255678dad56 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/8671796a15e44a1090ad56d4b4254cea732ec8ec | ORPH sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/90a9bcba061b095a99eaa920c250e1973daf8b21 | ORPH s390x | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/154c0c760e9ae6e6144beef01ac50403ea65501a | ORPH aarch64_be | micropython-1.19.1 | NOK | http://autobuild.buildroot.net/results/d0611850c01940a1c225800feb27b539273fcc15 | or1k | musepack-r475 | NOK | http://autobuild.buildroot.net/results/a0164709cf385c6a761d00dac5733515274ec8ce | ORPH aarch64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/2837a96b6ca32bde4c17fcfa557bd4f65fd9a91e | ORPH arc | musepack-r475 | NOK | http://autobuild.buildroot.net/results/138e5c18f69fd860a91d9a9dd7e85d0af0d9b86f | ORPH mips64 | musepack-r475 | NOK | http://autobuild.buildroot.net/results/8a9bfa03d25dc1c79a05eb2dacc37368401883ae | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/f1e0c9138fd0d82172910e897b2f09c2da0d7a10 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/1c27d53e8bc344b34068cfdc3bd8186d22410616 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/988e9bb4bbdb01011f120f13dd453c1475d57c19 | nios2 | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/4159d13ba1bf0af3f401ba62dfc87cb33988eff7 | microblaze | nanocom-1.0 | NOK | http://autobuild.buildroot.net/results/7023f3966e6121e96674b0dbdb2608ea78652293 | powerpc64le | neard-0.18 | NOK | http://autobuild.buildroot.net/results/ce19e02de84c5212d9d2d012ac939c8053c01508 | xtensa | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/d4872de407e3cee040831a665bfebfb91c002c74 | ORPH armeb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/a5f04ad0b1b477d0bfaef4dfa14729e4b1b5cd7c | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/7ec7e3f7db32f340e144c9189351cb4bb7bb42d5 | ORPH powerpc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/f864eaed3dfce7b930b26d26da713f4f1ddcda94 | ORPH powerpc64le | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/4cf2eb3124509c8e07ee971659b4d1c320feb07e | riscv64 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/3cdee9dc4285a68d1af4030d4c0edfc2679874f6 | arc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/2a9d62d2f3ee00bb1a60658fe805eb075ed73d11 | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1a18781edf3922b5cda03734f081396d7d725100 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fe8c05833908372507d6a048293ed633261532f6 | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/697cdcea128c3716c9ae81be6c97937ebd80a5da | ORPH armeb | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/f3d86c0ca8493e1e7bf6153e95bbf75c5beabc30 | ORPH powerpc | openswan-3.0.0 | NOK | http://autobuild.buildroot.net/results/a6db918be120274cf321835f22776cc06a991673 | ORPH riscv32 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/51afe46e4aa14b8a60b27a2c43ec4ac12cbd7265 | or1k | pcsc-lite-1.9.8 | NOK | http://autobuild.buildroot.net/results/d42ca52cb55bbba1b88d0eefe568e51c00287424 | ORPH aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1f572b125ca771588d14bf14dd5c1a1c6ee10010 | arceb | postgresql-14.5 | NOK | http://autobuild.buildroot.net/results/a0a5d81aab60857011fc05a8e9abbed1edeaa934 | ORPH mipsel | proxychains-ng-4.16 | NOK | http://autobuild.buildroot.net/results/d7c50976c5b4514fa8a19c57509804767dd7610c | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/cc85ecb8432af1e67a041d06da710fdb77793007 | ORPH armeb | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/dec977009cdcd57f90e60d2a95509b0fae89160b | mipsel | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/325e206d83a4952ccc7148d1574e4d4103791b34 | arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/80206151b94a0dcc94138cee6f5bc0c9ef4ac578 | powerpc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/fd28805e4a72f750be50e9f8ef97f4d4532c3c50 | arc | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/0b7d52f98fd0ce9e8114f50b020c28905b4bd14b | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/0567c061175054554df1da7b3d23340df0758dde | powerpc64 | rtl8188eu-903b6fcb821465fe9... | NOK | http://autobuild.buildroot.net/results/a26c4a1b71a7709f61b6e56a2265de80a9bdda67 | riscv32 | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/8424fb8a4db2afb98d057e0a8c26856168a84c8a | sh4aeb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/d5dfec2ff1f9992545a402655600fcf4b758804f | ORPH microblaze | sdl_mixer-d1725fcb7c4e987ae... | NOK | http://autobuild.buildroot.net/results/8ee67d743ad838229f856a46623742fba5e37a41 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/acb4a376a95de5560b1dbd630810f254f5277f10 | ORPH microblaze | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2e6e6e98fee6a00b3a95fa2278e74de4930d3cfd | ORPH aarch64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/a9c26d9f11a8ccb00a12acb2ca5c41a8b6e7b0c9 | ORPH microblazeel | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/2b33425b673e45fa1780cf6d883b56eba473da74 | ORPH powerpc64 | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/d380a693fa121d3230a379571fad3c2047ea5c0b | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/c0abd26b8e709e68e6a761f3582dbf478c6cc6ad | ORPH aarch64_be | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/74dfb81886a36279be7ab5c7abae61475d3830e3 | ORPH armeb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/f47b0fb4a3e545860ccdb29f8450583fbf3a4e5b | ORPH s390x | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/4dcb2a5ee47c08141175badbae6c1d30c6badc6c | ORPH arceb | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/34eb008322fe58c3be2a0830427e18f962e11b1f | ORPH xtensa | slang-2.3.2 | NOK | http://autobuild.buildroot.net/results/9a4dabff2292c532093802b997da40f15062cc97 | ORPH arm | sslh-1.22c | NOK | http://autobuild.buildroot.net/results/6949d74ae207d7b60a2b9258ce385451d5396374 | powerpc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/bf16a81a113c143029ae24cf1b18a20883af9bd3 | ORPH s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7ddc967bd567666b0114db5ca1646444725da870 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/404ca85df92ecfdaf63859a01b99ae84b315cc67 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ea54efdc1c46ba0432c8b23b184f1e675ffecab3 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8414f09b7f5d67b2666e6fd68169986fd7d644d9 | mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e4743b288a311843d37d2bdd1c4950c356756325 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8e2585502c4c6f033b7e00d682c57ae39022629d | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d8a50b06b9f56a01a68e17806d25c4e6e7a2a8a9 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/61f80df2f53722cf1632abff7604e3206337c80d | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a674b9ffb937ad94410e922873d101d8b3ba4f24 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8019c11782a6eaa0117f012f4f6ebe3d92a9097f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2ab8682247eab887b082cbe6fbe3b4c3647b05fc | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5d3f8b257546cc9a54e1ca72b4f5b7e2bd6bad60 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ea13027f05556c4cc72b3beb24d00c2131cb769f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c4b0fa8eb0e54a7161bd94f66b84055c5e0efb47 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a587de9e3f9925e8edab81400d35f9d91af4e028 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/33d502e8567323e42c08c152c4a83d0e84a7c7a8 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b7a7023d791396b09d897f5bead84758bf70ae3a | ORPH x86_64 | trace-cmd-2.9.7 | NOK | http://autobuild.buildroot.net/results/2563145366829525e224f0f81d0a1487560737b0 | mips | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/c7ba9fa3c160ab3473e0b0c91578123fd218ff3f | mipsel | tstools-08f6be304040e7b8476... | NOK | http://autobuild.buildroot.net/results/64bcb232a04264969b7ac7f08b04f1f74f22c7aa | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/2a3769de75af4b176d3409e456d64500439f2def | sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/5f3f541d6db08d21c9798cd5d6cb9938d5fa048d | m68k | unknown | NOK | http://autobuild.buildroot.net/results/776a7167a00fed9e75490ee12ecef16d7cc528a4 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/db28a85bc6442ae2fc4631b40dc3c7032253c1fc | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/55e992d23131604504d2b7b2613acdbd6f627727 | mips | unknown | NOK | http://autobuild.buildroot.net/results/967776321f07ba5f28f71db79f3345e294355692 | mips64 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/743dd69be7b938a09a13d918765bb0824ba1ac21 | ORPH nios2 | xserver_xorg-server-21.1.4 | NOK | http://autobuild.buildroot.net/results/50248dde36688832735a84f4a3eb11359f4f130a | nios2 | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/5e2e3a601aaacda50552dce05ea939d0c51ece80 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9a8e867641a6eadccf6d7ae7ed8f64d331708843 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2abf2bb11aa18582eed9d85ddfc1852e091b9ac6 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/cfecb14cd1e919a8e8271937a17548ae48dcf4e5 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8c30b20da1f3514ff4d2a34ad53e30386f68b54e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0f89be309f023fdbbdffeb1e109d8eb380675ae4 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/5f61c3a2368b602bba45eaee534cd8ee8f0f80bc | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f05ceacc5c59a2f842a6ba164a115c46222e8b8f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fc013e3291c6b85d8c6cf2b74672a2476acc82de | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7c42b5a046ed0c37a5ee7210a1069e43fbfe87c6 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8b0384eb57f23cb03bdb616c761c6cd2d4afeb18 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/d2e00bac317089990286e040b953efcaf245f661 | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- nginx-1.20.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- riscv32 | nginx-1.20.1 | NOK | http://autobuild.buildroot.net/results/2da3d372a49f074597c8265ef227ca9967af94eb | Classification of failures by reason for 2022.08.x -------------------------------------------------- /home/buildroot/autobuild/i... | 1 frr-8.2.2 | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 host-rust-1.62.0 | 1 ipmiutil-3.1.8 | 1 package/openssh/openssh.mk:... | 1 qt5location-db3b6bc6afed647... | 1 quickjs-2021-03-27 | 1 rtl8812au-aircrack-ng-4ab07... | 1 tealdeer-1.5.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/64bdda8458f80f30078e7fb9a8ae1ae104f5fb48 | mips64el | frr-8.2.2 | NOK | http://autobuild.buildroot.net/results/f771a0c85e009d568836ec254e4d2441c1d9bd5a | microblaze | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/874a88d9645efef9eaf2efbbf50c489d8e96604c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/cde9efa9c157fd9deff66c18a8a3385acb9444de | ORPH arm | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/b9a1123618683786d6885a71849e4a72fa9f6bfa | x86_64 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/95ccad4a8e32489eb2906ff232d19582ee97132a | x86_64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/00c87faa3b17f19793c94611f82f59b188a697b5 | microblazeel | qt5location-db3b6bc6afed647... | NOK | http://autobuild.buildroot.net/results/591ffbf101f4063dd95f476030ac43fd79a677ff | sh4 | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/c71453ec602a921995876b48958185c612302106 | s390x | rtl8812au-aircrack-ng-4ab07... | NOK | http://autobuild.buildroot.net/results/0b90061cea7ee22d5822214f081d14304ee5fcc4 | s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/44396f4433eb3ba07d212f0763cab396a4c7128f | Gitlab CI results for 2022-10-17 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908499 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908500 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908501 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908502 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908503 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908504 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908604 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180909384 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180909385 | ORPH TestGdbArc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908612 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908620 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908624 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908626 | ORPH TestInitSystemNone | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908556 | ORPH ...IfupdownDbusbrokerDbus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908581 | ORPH TestLuajitRings | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908928 | ORPH ...honPy3FlaskExpectsJson | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908867 | ORPH TestS6Networking | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908938 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3180908952 | ORPH -- http://autobuild.buildroot.net From thomas.petazzoni at bootlin.com Tue Oct 18 06:36:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 18 Oct 2022 08:36:32 +0200 Subject: [Buildroot] [PATCH 3/4] package/go-bin: new package In-Reply-To: References: <20221017143125.41622-1-thomas.perale@mind.be> <20221017143125.41622-4-thomas.perale@mind.be> Message-ID: <20221018083632.6f336ec6@windsurf> On Mon, 17 Oct 2022 09:13:54 -0700 Christian Stewart wrote: > Instead of adding new packages... > > Continue using "host-go" and add parameters under a menu config for it. > Then you can simply use a single variable - GO_VERSION - rather than 2 new > packages. > > I'm happy to send a prototype of this if you need. I also thought of doing this for the NodeJS package, instead of separating host-nodejs-bin and host-nodejs-src. I went for the virtual-package + 2 providers solution as this is what we had done with Rust. The main advantage I see with the single package solution is that the version of NodeJS would be located at only one place. Although this could also be solved by: package/ nodejs/ nodejs.mk <= contains the version nodejs/ <= virtual package nodejs-bin/ <= pre-compiled provider nodejs-src/ <= source-based provider In my proposal I solved this duplicated version by simply having a comment above the _VERSION field to remind people that the other package supporting NodeJS should be bumped at the same time. The advantage of the 2 packages solution is obviously that each package is simpler. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:43 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:43 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221017211048.43d2394c@gmx.net> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> Message-ID: <20221018085943.104f227f@booty> Hi Peter, Giulio, Petr, Thank you all for the feedback -- I see my patch worked effectively :) You all seem to know way more than I do, which is not surprising as I'm not actively using this package anymore. On Mon, 17 Oct 2022 21:10:48 +0200 Peter Seiderer wrote: > Hello Luca, *, > > On Mon, 17 Oct 2022 09:39:53 +0200, Luca Ceresoli via buildroot wrote: > > > From: Luca Ceresoli > > > > This package fails building with a kernel >= 6.0 [0] due to internal API > > changes [1]: > > > > .../ioctl_cfg80211.c: In function ?rtw_cfg80211_indicate_connect?: > > ...ioctl_cfg80211.c:709:12: error: ?struct cfg80211_roam_info? has no member named ?channel? > > 709 | roam_info.channel = notify_channel; > > | ^ > > ...ioctl_cfg80211.c:710:12: error: ?struct cfg80211_roam_info? has no member named ?bssid? > > 710 | roam_info.bssid = cur_network->network.MacAddress; > > | ^ > > > > There is currently no fix in the github repository, and it's probably not > > worth fixing because, as the Config.in help text states: > > > > This is needed only for Linux kernels before 3.12. > > Since 3.12, there is a (staging) driver in mainline, with a > > similar codebase. > > Despite the buildroot help text the rtl8188eu code base is still maintained > see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream > versions tend to support different feature sets regarding IBSS and/or monitor > mode etc. - not sure about this one but valid for some other rtlxxxx ones), Good to know! Why not adding this info to Config.in too? It would avoid others trying to remove the package again. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:51 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:51 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: <20221018085951.5570b633@booty> Hi Giulio, On Mon, 17 Oct 2022 23:12:39 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 07:04:42 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 09:04:42 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: References: <20221017071002.48266-1-neal.frager@amd.com> <20221017155854.48220785@booty> Message-ID: <20221018090442.2cb7fda8@booty> Hi Neal, Michal, On Mon, 17 Oct 2022 14:15:16 +0000 "Frager, Neal" wrote: > Hi Luca, > > > Why are these binaries board-specific? I thought this used to be only > > needed for the "community workflow" before U-Boot SPL was able to load > > a pmufw cfg object. > > Good question! I had a feeling you would ask this. ;-) > In the case of the zcu102, zcu104 and zcu106, the pmufw binary is not board specific. The same pmufw binary will work on all 3 boards and even custom hardware, if a developer wants to use it unchanged. OK, I see. (@Michal) I compared the zcu102 and zcu106 binaries and they are different, thus I wondered. > But since the pmu reset gpios are customisable among other things, the kria kv260 actually uses a different pmufw configuration. And developers may wish to modify the pmufw for their target as well. > > Since the Xilinx firmware repository is created using the petalinux prebuilt images for each target hardware, we chose to have a pmufw.elf in each board directory to match what comes from the petalinux builds. Sure, knowing the process clarifies the reason for having different places for firmwares that are equivalent. > That said, since the Xilinx repository has a pmufw.elf in each individual board directory, I thought it would be cleaner for buildroot to use the pmufw.elf for each specific target. Even if the zcu102 and zcu106 pmufw.elf binaries are really interchangeable. Sure it is. Thank you both for the clarifications! Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 07:05:05 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 09:05:05 +0200 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-2-neal.frager@amd.com> References: <20221017071002.48266-1-neal.frager@amd.com> <20221017071002.48266-2-neal.frager@amd.com> Message-ID: <20221018090505.6bd09c80@booty> On Mon, 17 Oct 2022 01:10:02 -0600 Neal Frager wrote: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu106. > Details of the issue can be found here: > > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > > Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From luca.ceresoli at bootlin.com Tue Oct 18 06:59:53 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Tue, 18 Oct 2022 08:59:53 +0200 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: <20221018085953.1c4d07a0@booty> Hi Giulio, On Mon, 17 Oct 2022 22:18:04 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti Thank you! Not sure it makes sense for this kind of patch, but since I discovered Giulio knows much better than me this package: Reviewed-by: Luca Ceresoli -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.perale at essensium.com Tue Oct 18 08:03:30 2022 From: thomas.perale at essensium.com (Thomas Perale) Date: Tue, 18 Oct 2022 10:03:30 +0200 Subject: [Buildroot] [PATCH 1/4] package/goc: new virtual package In-Reply-To: References: <20221017142849.41399-1-thomas.perale@mind.be> <20221017142849.41399-2-thomas.perale@mind.be> <20221017175500.GB3666@scaer> <20221017184442.GD3666@scaer> Message-ID: Dear Christian, Thomas, I also do agree renaming the 'go' package to 'go-src' is clearer. But then to not modify the content of `package/pkg-golang.mk` I will also need to move the variable used by `package/pkg-golang.mk` aswell as `package/go-src/ go-src.mk` to `package/go/go.mk` (for instance `HOST_GO_COMMON_ENV`, `HOST_GO_TARGET_ENV`, ...) or they will be renamed to `HOST_GO_SRC_*`. Correct me if I'm wrong but there is no way to predict the order of inclusion of '.mk' files, so `package/go-src/go-src.mk` might access to undefined variable. This is why I think a next patch should propose the same structure for `nodejs`, `rust`, `go` using subdirectories: package/ ?? go/ ? ?? go-src/ ? ?? go-bin/ ? ?? go-bootstrap/ ? ?? go.mk (<---- Contain the 'global' variable used by `pkg-golang.mk`, `go-src/go-src.mk`, `go-bin/go-bin.mk`) ? ?? Config.in Where `package/go/go.mk` is a virtual package that include the go variants: ``` HOST_GO_TARGET_ENV = \ ... HOST_GO_HOST_ENV = \ ... $(eval $(host-virtual-package)) include $(sort $(wildcard package/go/*/*.mk)) ``` This solution won't change `pkg-golang.mk` but since it introduce a new way to handle package variant I prefer to keep it for a next patch. PERALE Thomas On Mon, Oct 17, 2022 at 8:51 PM Christian Stewart wrote: > Hi Yann, > > Just to reply to that one question on why a host go compiler is useful- > > On Mon, Oct 17, 2022 at 11:45 AM Yann E. MORIN > wrote: > > > - host go compiler (see patch linked below) > > > > If we have a pre-built host-go in the tree, thetre is then no reason to > > be able to use the host system go compiler, is there? > > The host Go compiler may be compiled from source (i.e. Gentoo) and the > user (me) wants to trust the gentoo binary for Go over downloading > another precompiled bin from the internet. > > Thomas - > > On Mon, Oct 17, 2022 at 11:48 AM Thomas Petazzoni > wrote: > > - NodeJS (proposed by me) > > virtual package: host-nodejs > > pre-compiled package: host-nodejs-bin > > from source package: host-nodejs-src > > > > The odd thing here being that host-nodejs is a virtual package, but > > nodejs is a regular package building NodeJS from source for the > > target. > > > > - Go (proposed by Thomas Perale) > > virtual package: host-goc > > pre-compiled package: host-go-bin > > from source package: host-go > > > > So Thomas aligned on the naming used in the Rust world. I must say I do > > have a preference for the naming I have chosen for NodeJS, which IMO is > > clearer. > > I agree that the following would be preferable: > > virtual package: host-go > pre-compiled package: host-go-bin > from source package: host-go-src > > ... although I would submit that all 3 could live in a single host-go > package. > > Best, > Christian Stewart > -------------- next part -------------- An HTML attachment was scrubbed... URL: From heiko.thiery at gmail.com Tue Oct 18 08:06:53 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 10:06:53 +0200 Subject: [Buildroot] [PATCH 1/2] configs/kontron_smarc_sal28: use U-Boot 2022.10 Message-ID: <20221018080653.1586970-1-heiko.thiery@gmail.com> Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y since this are dependencies for building mkeficapsule u-boot tool. Cc: Michael Walle Signed-off-by: Heiko Thiery --- configs/kontron_smarc_sal28_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 877903a1fe..25846c8cbd 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" -- 2.30.2 From heiko.thiery at gmail.com Tue Oct 18 08:06:55 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 10:06:55 +0200 Subject: [Buildroot] [PATCH 2/2] configs/kontron_smarc_sal28: use linux kernel 5.19.16 In-Reply-To: <20221018080653.1586970-1-heiko.thiery@gmail.com> References: <20221018080653.1586970-1-heiko.thiery@gmail.com> Message-ID: <20221018080653.1586970-2-heiko.thiery@gmail.com> Cc: Michael Walle Signed-off-by: Heiko Thiery --- configs/kontron_smarc_sal28_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 25846c8cbd..e502b2b67b 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_ROOTFS_OVERLAY="board/kontron/smarc-sal28/rootfs_overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/smarc-sal28/post-build.sh" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.16" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var3-ads2 freescale/fsl-ls1028a-kontron-sl28-var4 freescale/fsl-ls1028a-kontron-kbox-a-230-ls" -- 2.30.2 From peter at korsgaard.com Tue Oct 18 08:25:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 10:25:48 +0200 Subject: [Buildroot] [PATCH] package/squid: security bump to version 5.7 Message-ID: <20221018082548.1987175-1-peter@korsgaard.com> Fixes the following security issues: - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager https://www.openwall.com/lists/oss-security/2022/09/23/1 - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication https://www.openwall.com/lists/oss-security/2022/09/23/2 Signed-off-by: Peter Korsgaard --- package/squid/squid.hash | 8 ++++---- package/squid/squid.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/squid/squid.hash b/package/squid/squid.hash index 22c6db8c70..b00d14011e 100644 --- a/package/squid/squid.hash +++ b/package/squid/squid.hash @@ -1,6 +1,6 @@ -# From http://www.squid-cache.org/Versions/v5/squid-5.6.tar.xz.asc -md5 2f2201a18a0a727ab589d951ebe4f815 squid-5.6.tar.xz -sha1 a01f47b3e9ff06245c894773de30bfd88ab14f65 squid-5.6.tar.xz +# From http://www.squid-cache.org/Versions/v5/squid-5.7.tar.xz.asc +md5 7a3764a3c5833631a779d7827901cda7 squid-5.7.tar.xz +sha1 141e8007d6b1cfee34654127a9ca025125b37b58 squid-5.7.tar.xz # Locally calculated -sha256 38d27338a347597ce0e93d0c3be6e5f66b6750417c474ca87ee0d61bb6d148db squid-5.6.tar.xz +sha256 6b0753aaba4c9c4efd333e67124caecf7ad6cc2d38581f19d2f0321f5b7ecd81 squid-5.7.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squid/squid.mk b/package/squid/squid.mk index 86a0c714c6..355af0b902 100644 --- a/package/squid/squid.mk +++ b/package/squid/squid.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUID_VERSION = 5.6 +SQUID_VERSION = 5.7 SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz SQUID_SITE = http://www.squid-cache.org/Versions/v5 SQUID_LICENSE = GPL-2.0+ -- 2.30.2 From yann.morin at orange.com Tue Oct 18 08:40:44 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 10:40:44 +0200 Subject: [Buildroot] [PATCH 0/4] systemd: sort out the conflict between var factory and tmpfiles (branch systemdify-var) In-Reply-To: <20221017201444.GE3666@scaer> References: <30300_1666015916_634D62AC_30300_412_1_20221017141154.GE2064029@tl-lnx-nyma7486> <14503_1666022446_634D7C2E_14503_9_8_20221017160044.GF2064029@tl-lnx-nyma7486> <20221017201444.GE3666@scaer> Message-ID: <17222_1666082446_634E668E_17222_61_1_20221018084044.GG2064029@tl-lnx-nyma7486> Norbert, All, On 2022-10-17 22:14 +0200, Yann E. MORIN spake thusly: > On 2022-10-17 18:49 +0200, Norbert Lange spake thusly: > > Am Mo., 17. Okt. 2022 um 18:00 Uhr schrieb : > > > But so far, we do not have that technically better solution, so we need > > > to fix things that are arctually broken. > > I tried to bring that in for ages. Probably just have cooked up a patch instead. > I'll test it in our use-case @work tomorrow. I did preliminray tsts, and it works, that's great! :-) I'll be cleaning up my series and repost something real quick I hope. Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From heiko.thiery at gmail.com Tue Oct 18 09:59:59 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 11:59:59 +0200 Subject: [Buildroot] [PATCH 1/2] configs/kontron_smarc_sal28: use U-Boot 2022.10 In-Reply-To: <20221018080653.1586970-1-heiko.thiery@gmail.com> References: <20221018080653.1586970-1-heiko.thiery@gmail.com> Message-ID: Hi, Am Di., 18. Okt. 2022 um 10:07 Uhr schrieb Heiko Thiery : > > Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y > since this are dependencies for building mkeficapsule u-boot tool. please ignore it and the one for the kernel update.. it does not fit in the image. Damn (@michael ;-/) -- Heiko > Cc: Michael Walle > Signed-off-by: Heiko Thiery > --- > configs/kontron_smarc_sal28_defconfig | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig > index 877903a1fe..25846c8cbd 100644 > --- a/configs/kontron_smarc_sal28_defconfig > +++ b/configs/kontron_smarc_sal28_defconfig > @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_VERSION=y > -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" > BR2_TARGET_UBOOT_NEEDS_DTC=y > BR2_TARGET_UBOOT_NEEDS_PYTHON3=y > BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y > +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y > # BR2_TARGET_UBOOT_FORMAT_BIN is not set > BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" > -- > 2.30.2 > From paul at crapouillou.net Tue Oct 18 11:01:57 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Tue, 18 Oct 2022 12:01:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/umtprd: add patch to fix output_dir make dependency Message-ID: <20221018110157.35331-1-paul@crapouillou.net> Object file targets need to depend on the output_dir target. Upstream commit: https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ Signed-off-by: Paul Cercueil --- .../0001-Fix-output_dir-make-dependency.patch | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..fcbca6b000 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,46 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +[paul at crapouillou.net: Backport from upstream commit d84216a] +Signed-off-by: Paul Cercueil +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.35.1 + -- 2.35.1 From feedback at dallmeier.com Tue Oct 18 11:49:45 2022 From: feedback at dallmeier.com (feedback at dallmeier.com) Date: Tue, 18 Oct 2022 13:49:45 +0200 Subject: [Buildroot] [PATCH] package/dhcpcd: Fix kconfig option for privilege separation In-Reply-To: <20221014193021.GD2503@scaer> References: <59335227-32d1-9d2f-ce9c-4a7a45ea913b@dallmeier.com> <20221014193021.GD2503@scaer> Message-ID: On 2022-10-14 21:30, Yann E. MORIN wrote: > Andreas, All, > > On 2022-10-14 11:10 +0200, feedback--- via buildroot spake thusly: >> Hi all, >> >> we are not sure if this is even a bug, but BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via 'menuconfig' without setting a >> string for the bool value. > > Thanks for the suggestion. > > That was on purpose that this was not selectable, see the commit log > that introduced the option, 20dd9453f32c (package/dhcpcd: add > BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP), which referred to: > > https://patchwork.ozlabs.org/project/buildroot/patch/20210303091904.467706-1-fontaine.fabrice at gmail.com > > which basically said (paraphrasing): > > For such complex conditions, it is easier to introduce a Kconfig > symbol, rather than write complex Makefile code in the .mk file. > > Indeed, before 20dd9453f32c, there were quite a few repetitive code > blocks to handle each of them, see commit d412539dbca2 (package/dhcpcd: > disable privsep on older kernels). > > Can you explain why you'd want to explicitly disable privilege > separation in dhcpcd? Thank you for the explanation. I didn't know that you use the kconfig values also for other purposes sometimes. First we thought the kernel version from one of our systems is too old because of some strange error messages during startup of dhcpcd, but it seems that there was another problem involved which has been fixed. I have turned privilege separation back on for now. >> --- a/package/dhcpcd/Config.in >> +++ b/package/dhcpcd/Config.in >> @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD >> ?if BR2_PACKAGE_DHCPCD >> >> ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP >> -?????? bool >> +?????? bool "enable privilege separation" >> ??????? default y >> ??????? depends on BR2_USE_MMU >> ??????? # Audit headers were only added in recent kernels for some arches >> >> Best regards, >> Andreas > >> > > Please, avoid html mail; our patchwork did not even catch it: > https://patchwork.ozlabs.org/project/buildroot/list/ > > Next time, please use "git send-email", which sends patches in a format > ready to be digested to be applied easily. Sorry for the HTML mail, this one is text hopefully. > Regards, > Yann E. MORIN. > >> >> >> >> >> Hi all,
      >>
      >> we are not sure if this is even a bug, but >> BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP is not selectable via >> 'menuconfig' without setting a string for the bool value.
      >>
      >> --- a/package/dhcpcd/Config.in
      >> +++ b/package/dhcpcd/Config.in
      >> @@ -12,7 +12,7 @@ config BR2_PACKAGE_DHCPCD
      >> ?if BR2_PACKAGE_DHCPCD
      >> ?
      >> ?config BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP
      >> -?????? bool
      >> +?????? bool "enable privilege separation"
      >> ??????? default y
      >> ??????? depends on BR2_USE_MMU
      >> ??????? # Audit headers were only added in recent kernels for some >> arches
      >>
      >> Best regards,
      >> Andreas
      >>
      >>       >> >> > >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > > From ps.report at gmx.net Tue Oct 18 13:14:45 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Tue, 18 Oct 2022 15:14:45 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> Message-ID: <20221018151445.42d376ff@gmx.net> Hello Giulio, On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy Please mention this in the commit message (including the breaking upstream commit) and additional mention that the used commit is from the branch(?) not master..., will save some research time for later updates... Regards, Peter > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash > index 9c7f2de4b6..ff8c0a3418 100644 > --- a/package/rtl8188eu/rtl8188eu.hash > +++ b/package/rtl8188eu/rtl8188eu.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz > +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz > sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING > diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk > index ebce4617ac..99f8248c05 100644 > --- a/package/rtl8188eu/rtl8188eu.mk > +++ b/package/rtl8188eu/rtl8188eu.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 > +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa > RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) > RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) > RTL8188EU_LICENSE_FILES = COPYING From giulio.benetti at benettiengineering.com Tue Oct 18 13:15:06 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:15:06 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in Message-ID: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO specifically: * Switch to use LIB80211. * Switch to use MAC80211. * Switch to use CFG80211. So let's remove the description that is not valid anymore. Suggested-by: Luca Ceresoli Signed-off-by: Giulio Benetti --- package/rtl8188eu/Config.in | 3 --- 1 file changed, 3 deletions(-) diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in index 76d9085297..8d68d104c8 100644 --- a/package/rtl8188eu/Config.in +++ b/package/rtl8188eu/Config.in @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU depends on BR2_LINUX_KERNEL help A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. Make sure your target kernel has the CONFIG_WIRELESS_EXT config option enabled. -- 2.34.1 From giulio.benetti at benettiengineering.com Tue Oct 18 13:15:41 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:15:41 +0200 Subject: [Buildroot] [PATCH] rtl8188eu: remove package In-Reply-To: <20221018085943.104f227f@booty> References: <20221017073953.510219-1-luca.ceresoli@bootlin.com> <20221017211048.43d2394c@gmx.net> <20221018085943.104f227f@booty> Message-ID: <121f1b7b-457c-0c19-f94b-2f2decca0a29@benettiengineering.com> Hi Luca, All, On 18/10/22 08:59, Luca Ceresoli via buildroot wrote: [ SNIP ] >>> There is currently no fix in the github repository, and it's probably not >>> worth fixing because, as the Config.in help text states: >>> >>> This is needed only for Linux kernels before 3.12. >>> Since 3.12, there is a (staging) driver in mainline, with a >>> similar codebase. >> >> Despite the buildroot help text the rtl8188eu code base is still maintained >> see e.g. 'rtl8188eu: Fix builds for kernel 6.0 '([2]) and the various forks/upstream >> versions tend to support different feature sets regarding IBSS and/or monitor >> mode etc. - not sure about this one but valid for some other rtlxxxx ones), > > Good to know! Why not adding this info to Config.in too? It would avoid > others trying to remove the package again. > Good idea, I've just sent a patch for this: https://patchwork.ozlabs.org/project/buildroot/patch/20221018131506.123350-1-giulio.benetti at benettiengineering.com/ Kind regards -- Giulio Benetti Benetti Engineering sas From giulio.benetti at benettiengineering.com Tue Oct 18 13:17:58 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:17:58 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221018151445.42d376ff@gmx.net> References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> <20221018151445.42d376ff@gmx.net> Message-ID: Hi Peter, On 18/10/22 15:14, Peter Seiderer wrote: > Hello Giulio, > > On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti wrote: > >> Signed-off-by: Giulio Benetti >> --- >> V1->V2: >> * use specific upstream commit SHA1 since the latest is buggy > > Please mention this in the commit message (including the breaking upstream > commit) and additional mention that the used commit is from the > branch(?) not master..., will save some research time for later updates... Ok. My patch to fix the build with Linux < 6.0 has been already committed, so I send a V3 using the latest commit and I point the branch in the commit log. To be honest it wasn't easy for me too :-) Thank you! Best regards -- Giulio Benetti Benetti Engineering sas > Regards, > Peter > >> --- >> package/rtl8188eu/rtl8188eu.hash | 2 +- >> package/rtl8188eu/rtl8188eu.mk | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash >> index 9c7f2de4b6..ff8c0a3418 100644 >> --- a/package/rtl8188eu/rtl8188eu.hash >> +++ b/package/rtl8188eu/rtl8188eu.hash >> @@ -1,3 +1,3 @@ >> # Locally computed >> -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz >> +sha256 e6106521139cc463eaa74d1491e212437b2106c3aa0005b1b7b93f1d8a090237 rtl8188eu-7a7c5e0c0bc168ec5083a707e300e298dd4811fa.tar.gz >> sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING >> diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk >> index ebce4617ac..99f8248c05 100644 >> --- a/package/rtl8188eu/rtl8188eu.mk >> +++ b/package/rtl8188eu/rtl8188eu.mk >> @@ -4,7 +4,7 @@ >> # >> ################################################################################ >> >> -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 >> +RTL8188EU_VERSION = 7a7c5e0c0bc168ec5083a707e300e298dd4811fa >> RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) >> RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) >> RTL8188EU_LICENSE_FILES = COPYING > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From giulio.benetti at benettiengineering.com Tue Oct 18 13:19:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:19:34 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: References: <20221017211239.1751923-1-giulio.benetti@benettiengineering.com> <20221018151445.42d376ff@gmx.net> Message-ID: <6ae4b9c9-ab3c-b77d-1220-c62fd12dd8ee@benettiengineering.com> And I've also forgotten the Fixes: On 18/10/22 15:17, Giulio Benetti wrote: > Hi Peter, > > On 18/10/22 15:14, Peter Seiderer wrote: >> Hello Giulio, >> >> On Mon, 17 Oct 2022 23:12:39 +0200, Giulio Benetti >> wrote: >> >>> Signed-off-by: Giulio Benetti >>> --- >>> V1->V2: >>> * use specific upstream commit SHA1 since the latest is buggy >> >> Please mention this in the commit message (including the breaking >> upstream >> commit) and additional mention that the used commit is from the >> branch(?) not master..., will save some research time for later >> updates... > > Ok. My patch to fix the build with Linux < 6.0 has been already > committed, so I send a V3 using the latest commit and I point the branch > in the commit log. To be honest it wasn't easy for me too :-) > > Thank you! > Best regards -- Giulio Benetti Benetti Engineering sas From giulio.benetti at benettiengineering.com Tue Oct 18 13:39:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Tue, 18 Oct 2022 15:39:36 +0200 Subject: [Buildroot] [PATCH v3] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> Note that we use latest commit from branch v5.2.2.4 instead of branch master. Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti Reviewed-by: Petr Vorel Reviewed-by: Luca Ceresoli --- V1->V2: * use specific upstream commit SHA1 since the latest is buggy V2->V3: * use latest commit since it's been fixed and improve commit log as pointed by Peter Seiderer --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..0ad7786328 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 50529c110e0a45fbe3169d0e237c4d0959300840f5e162c24256452976fb2670 rtl8188eu-c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..199362d7ae 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING -- 2.34.1 From peter at korsgaard.com Tue Oct 18 13:50:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 15:50:39 +0200 Subject: [Buildroot] [PATCH 2022.02.x] package/php: security bump version to 8.0.24 In-Reply-To: <20221017181523.95205-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Mon, 17 Oct 2022 20:15:23 +0200") References: <20221017181523.95205-1-bernd.kuhls@t-online.de> Message-ID: <87pmep6y1c.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Fixes > - CVE-2022-31629: http://bugs.php.net/81727 > - CVE-2022-31628: http://bugs.php.net/81726 > Signed-off-by: Bernd Kuhls Committed to 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 13:48:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 15:48:44 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/php: security bump version to 8.0.24 Message-ID: <20221018135055.9F8E786E97@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ec14fbf8ecb600274c7431d4992b50adcc1c8bee branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes - CVE-2022-31629: http://bugs.php.net/81727 - CVE-2022-31628: http://bugs.php.net/81726 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index 2e9aa6880b..55a92c6c36 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 973fec765336ee01f47536a5db1c2eee98df9d34a41522b7b6c760159bf0a77b php-8.0.20.tar.xz +sha256 8e6a63ac9cdabe4c345b32a54b18f348d9e50a1decda217faf2d61278d22f08b php-8.0.24.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index d9c2edd839..facc2f5634 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.0.20 +PHP_VERSION = 8.0.24 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From james.hilliard1 at gmail.com Tue Oct 18 15:01:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 18 Oct 2022 09:01:19 -0600 Subject: [Buildroot] [PATCH 1/1] package/umtprd: fix make shuffle build Message-ID: <20221018150119.2305656-1-james.hilliard1@gmail.com> Backport a patch fixing a makefile dependency issue that breaks when using make 4.4's shuffle mode. Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d Signed-off-by: James Hilliard --- .../0001-Fix-output_dir-make-dependency.patch | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..2d4d6980f4 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,47 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +d84216a678edaca81c0899318231cdcca2100d38] +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.34.1 + -- 2.34.1 From angelo at amarulasolutions.com Tue Oct 18 15:16:24 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 18 Oct 2022 17:16:24 +0200 Subject: [Buildroot] [PATCH v4] package/cutekeyboard: new package Message-ID: <20221018151624.882453-1-angelo@amarulasolutions.com> CuteKeyboard is a Qt virtual keyboard plugin for embedded applications Signed-off-by: Angelo Compagnucci Acked-by: Andrea Ricchi --- v2: * bump to verison v1.0.1 v3: * Adding me to developers file v4: * Fixing typo in Config.in package/Config.in | 1 + package/cutekeyboard/Config.in | 19 +++++++++++++++++++ package/cutekeyboard/cutekeyboard.hash | 3 +++ package/cutekeyboard/cutekeyboard.mk | 18 ++++++++++++++++++ 4 files changed, 41 insertions(+) create mode 100644 package/cutekeyboard/Config.in create mode 100644 package/cutekeyboard/cutekeyboard.hash create mode 100644 package/cutekeyboard/cutekeyboard.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..f11210d313 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1522,6 +1522,7 @@ menu "Graphics" source "package/cairo/Config.in" source "package/cairomm/Config.in" source "package/chipmunk/Config.in" + source "package/cutekeyboard/Config.in" source "package/exempi/Config.in" source "package/exiv2/Config.in" source "package/fltk/Config.in" diff --git a/package/cutekeyboard/Config.in b/package/cutekeyboard/Config.in new file mode 100644 index 0000000000..59362f0648 --- /dev/null +++ b/package/cutekeyboard/Config.in @@ -0,0 +1,19 @@ +config BR2_PACKAGE_CUTEKEYBOARD + bool "cutekeyboard" + depends on BR2_PACKAGE_QT5DECLARATIVE + depends on BR2_PACKAGE_QT5DECLARATIVE_QUICK + depends on BR2_PACKAGE_QT5QUICKCONTROLS2 + help + CuteKeyboard is a Qt virtual keyboard plugin for + embedded applications. + + https://amarula.github.io/cutekeyboard/ + +if BR2_PACKAGE_CUTEKEYBOARD + +config BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES + bool "cutekeyboard examples" + help + Compile also application example + +endif diff --git a/package/cutekeyboard/cutekeyboard.hash b/package/cutekeyboard/cutekeyboard.hash new file mode 100644 index 0000000000..3d3ec2f858 --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 8cbaddc5fbf479d5e20fc88228e9af5928fa5e588052ee496c2f2efbe2afc510 cutekeyboard-afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7.tar.gz +sha256 bdde6ec2ae2686623c0bb414bfb8bd731b314beff2264c602116ea60dd65964d LICENSE diff --git a/package/cutekeyboard/cutekeyboard.mk b/package/cutekeyboard/cutekeyboard.mk new file mode 100644 index 0000000000..3e4c08f44e --- /dev/null +++ b/package/cutekeyboard/cutekeyboard.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# qt5virtualkeyboard +# +################################################################################ + +CUTEKEYBOARD_VERSION = afacc3210b75d7e0de27dcc4c0f2bed0212cc4c7 +CUTEKEYBOARD_SITE = $(call github,amarula,cutekeyboard,$(CUTEKEYBOARD_VERSION)) +CUTEKEYBOARD_DEPENDENCIES = qt5declarative qt5quickcontrols2 +CUTEKEYBOARD_INSTALL_STAGING = YES +CUTEKEYBOARD_LICENSE = MIT +CUTEKEYBOARD_LICENSE_FILES = LICENSE + +ifeq ($(BR2_PACKAGE_CUTEKEYBOARD_EXAMPLES),y) +CUTEKEYBOARD_CONF_OPTS += CONFIG+=BUILD_EXAMPLES +endif + +$(eval $(qmake-package)) -- 2.25.1 From angelo at amarulasolutions.com Tue Oct 18 16:14:13 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 18 Oct 2022 18:14:13 +0200 Subject: [Buildroot] [PATCH] package/python-minimalmodbus: new package Message-ID: <20221018161413.1237297-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 4 files changed, 26 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..56af3d426b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 locally computed +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..e4e93b4c31 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From fontaine.fabrice at gmail.com Tue Oct 18 17:05:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 18 Oct 2022 19:05:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: fix build with gcc 4.8 Message-ID: <20221018170531.190643-1-fontaine.fabrice@gmail.com> Fix the following build failure with gcc 4.8 raised since bump to version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: In file included from alloc.c:25:0: utils.h:204:48: error: expected ';', ',' or ')' before 'dest' static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, ^ Fixes: - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e Signed-off-by: Fabrice Fontaine --- package/gesftpserver/gesftpserver.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index b47ec1c5d3..5a3ab0536c 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -16,7 +16,9 @@ GESFTPSERVER_CPE_ID_VENDOR = green_end GESFTPSERVER_CPE_ID_PRODUCT = sftpserver # forgets to link against pthread when cross compiling -GESFTPSERVER_CONF_ENV = LIBS=-lpthread +GESFTPSERVER_CONF_ENV = \ + CFLAGS="$(TARGET_CFLAGS) -std=c99" \ + LIBS=-lpthread # overwrite openssh version if enabled GESFTPSERVER_DEPENDENCIES += \ -- 2.35.1 From heiko.thiery at gmail.com Tue Oct 18 18:37:24 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Tue, 18 Oct 2022 20:37:24 +0200 Subject: [Buildroot] [PATCH v2] configs/kontron_smarc_sal28: use U-Boot 2022.10 Message-ID: <20221018183724.2377-1-heiko.thiery@gmail.com> Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y since this are dependencies for building mkeficapsule u-boot tool. Change the offset of the rootfs to left enough space for the U-Boot that has increased. Cc: Michael Walle Signed-off-by: Heiko Thiery --- board/kontron/smarc-sal28/genimage.cfg | 2 +- configs/kontron_smarc_sal28_defconfig | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/board/kontron/smarc-sal28/genimage.cfg b/board/kontron/smarc-sal28/genimage.cfg index c885cd51a6..82bab26fec 100644 --- a/board/kontron/smarc-sal28/genimage.cfg +++ b/board/kontron/smarc-sal28/genimage.cfg @@ -17,7 +17,7 @@ image sdcard-emmc.img { } partition rootfs { - offset = 2M + offset = 4M image = rootfs.ext4 partition-uuid = %PARTUUID% } diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index 877903a1fe..25846c8cbd 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -22,11 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" -- 2.20.1 From peter at korsgaard.com Tue Oct 18 19:41:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:41:53 +0200 Subject: [Buildroot] [PATCH v1 1/2] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-1-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 01:10:01 -0600") References: <20221017071002.48266-1-neal.frager@amd.com> Message-ID: <87ilkg7wce.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu102. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:42:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:42:18 +0200 Subject: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset In-Reply-To: <20221017071002.48266-2-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 01:10:02 -0600") References: <20221017071002.48266-1-neal.frager@amd.com> <20221017071002.48266-2-neal.frager@amd.com> Message-ID: <87bkq87wbp.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the zcu106. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From yann.morin at orange.com Tue Oct 18 19:43:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:06 +0200 Subject: [Buildroot] [PATCH 0/6 v3] systemd: sort out the conflict between var factory and tmpfiles Message-ID: <10881_1666122188_634F01CC_10881_33_1_cover.1666122184.git.yann.morin@orange.com> Hello All! This six-patch series touches on the delicate intricacies of the systemd package and how we integrate it in Buildroot, especially with regard to read-only filesystems. The underlying issue is that systemd wants a writable /var filesystem (it will store a bunch of things at runtime in there). A lot of packages also expect a writable /var. The solution we implemented in Buildroot is to generate a factory for /var, and register that as tmpfiles, at build time, and mount a tmpfs on the then-empty /var at runtime, so that systemd-tmpfiles populates /var on boot. Having a tmpfs means /var is repopulated from a clean state at each boot, and people who want a persistent /var have to provide their own mechanism to mount their actual filesystem instead. However, for some people, this does not seem to work as expected, so we introduced a call to systemd-tmpfiles at build time, to pre-populate the rootfs from all the tmpfiles, of which our var factory, at build time, entirely leaving them the reponsibility to make /var read-write. These two mechanisms clash with each others; they do not prevent a system from booting, but they cause files to be duplicated between the factory and the pre-populated /var. To solve the issue, this series introduces new options, so the user can elect to use either, none, or both mechanisms, as they see fit. The first two patches make it easier to change the location where /var is nounted from, by making it a systemd mount unit, rather than use the legacy fstab, and move the factory to /usr/share as it is a system factory (/etc is for the administartor to provide overrides). Then we move together the two mechanisms under the auspices of a common package, to make it easier to later make them conditional. Then we introduce those two new options, that drive each mechanism. We make sure the behaviour so far is kept, for those who have setups that are functional as is. Eventually, we add a new way to provide a writable /var, which uses a pre-populated /var on which an tmpfs is overlayed with an overlayfs. This new feature still uses a tmpfs as the writable part, and like for the factory case, leaves to the user the responsiility to provide for a persitent filesystem should they need one. This series would not have been entirely possible without the input from Norbert, who provided the basis for the overlayfs-based solution. Thanks! Changes v2 -> v3: - introduce the overlayfs-based proposal from Norbert - some rewording - some typo fixes (yah, Yann being Yann being me...) Changes v1 -> v2: - split Yann at work initial patch into the first two patch - move the systemd-tmpfile handling to the skeleton - introduce options to enable/disable factory or systemd-tmpfiles Regards, Yann E. MORIN. The following changes since commit 5b5d3befef9c92a7485c1c68989d95749882ee2a package/python-django: security bump to version 4.0.8 (2022-10-17 22:37:25 +0200) are available as patches in this mail series, for you to apply patches up to b3efa290e26b85b54ab27728bf190316cf2ab1ee system: add option to use an overlayfs on /var on a r/o root w/ systemd (2022-10-18 21:37:43 +0200) ---------------------------------------------------------------- Yann E. MORIN (6): package/skeleton-systemd: move /var factory tmpfiles out of /etc package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs package/skeleton-systemd: host the tmpfiles preparation script system: add options for /var factory and tmpfiles pre-seed system: introduce a choice for /var management system: add option to use an overlayfs on /var on a r/o root w/ systemd package/skeleton-init-systemd/factory/var.mount | 18 ++++++ .../fakeroot_tmpfiles.sh | 0 .../overlayfs/rootfs-bindmount-var.service | 21 +++++++ package/skeleton-init-systemd/overlayfs/var.mount | 15 +++++ .../skeleton-init-systemd/skeleton-init-systemd.mk | 36 ++++++++++-- package/systemd/systemd.mk | 6 -- system/Config.in | 67 +++++++++++++++++++++- 7 files changed, 150 insertions(+), 13 deletions(-) create mode 100644 package/skeleton-init-systemd/factory/var.mount rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:04 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:04 +0200 Subject: [Buildroot] [PATCH 1/6 v3] package/skeleton-systemd: move /var factory tmpfiles out of /etc In-Reply-To: References: Message-ID: <18712_1666122192_634F01D0_18712_304_1_aadcab6f9e8f71b5581c8a15b2773a431bb29ca0.1666122184.git.yann.morin@orange.com> When the rootfs is not remounted read-write (thus assuming a read-only rootfs like squashfs), we create a tmpfiles.d factory for /var. However, we register those in /etc/tmpfiles.d/, but /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). So, we move our var factory to /usr/lib/tmpfiles.d/, which is also the location where systemd itself places its own tmpfiles, and where we already put all our other tmpfiles (see audit, avahi, cryptsetup, dhcp, lighttpd, nfs-utils, quagga, samba4, swupdate) and our handling of systemd's catalog files too. We also rename the file to a better name, so that it is obvious it is generated by us (systemd already installs a var.conf of its own, so we want to avoid name clashing). Last little detail: there is no need or reason to create .../tmpfiles.d/ at install time; it is only needed in the rootfs-pre-cmd hook, so we only create it just before we need it. [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only moves out of /etc and into /usr/lib - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- package/skeleton-init-systemd/skeleton-init-systemd.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 795a171809..7b66732ef4 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -29,7 +29,6 @@ else # a real (but empty) directory, and the "factory files" will be copied # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW - mkdir -p $(TARGET_DIR)/etc/systemd/tmpfiles.d echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef @@ -38,6 +37,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var + mkdir -p $(TARGET_DIR)/usr/lib/tmpfiles.d for i in $(TARGET_DIR)/usr/share/factory/var/* \ $(TARGET_DIR)/usr/share/factory/var/lib/* \ $(TARGET_DIR)/usr/share/factory/var/lib/systemd/*; do \ @@ -51,7 +51,7 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR printf "C! %s - - - -\n" "$${j}" \ || exit 1; \ fi; \ - done >$(TARGET_DIR)/etc/tmpfiles.d/var-factory.conf + done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:05 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:05 +0200 Subject: [Buildroot] [PATCH 2/6 v3] package/skeleton-systemd: systemd-ify mounting /var tmpfs with ro rootfs In-Reply-To: References: Message-ID: <27491_1666122194_634F01D2_27491_495_1_cf89a104edc507c063e6f4716cc859891b489d27.1666122184.git.yann.morin@orange.com> To mount our /var tmpfs when the rootfs is mounted read-only (really, not remounted reqd-write), we use an entry in fstab. However, /etc could also be a tmpfs (for full state-less systems, or easy factory-reset, see [0]). It also prevents easily ordeting other systemd units until after /var is mounted 5not impossible, but less easy). So, we register /var as a systemd mount unit, so that we can also have the /var factory populated and functional even when /etc is empty. The var.mount unit is heavily modelled after systemd's own tmp.mount one, so we carry the same license for that file (in case that may apply). We add an explicit reverse dependency to systemd-tmpfiles-setup.service, to ensure /var is mounted before we try to populate it. This has two side effects: - as hinted previously, it simplifies writing other systemd units to order them after /var is mounted - replace it with their own, which mounts an actual filesystem [0] http://0pointer.de/blog/projects/stateless.html Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen [yann.morin.1998 at free.fr: - split original patch in two - this one only handles converting /var mounting into a systemd unit - adapt commit log accordingly ] Signed-off-by: Yann E. MORIN --- .../skeleton-init-systemd.mk | 3 ++- package/skeleton-init-systemd/var.mount | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 package/skeleton-init-systemd/var.mount diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 7b66732ef4..970951d553 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -30,7 +30,6 @@ else # back there by the tmpfiles.d mechanism. define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab - echo "tmpfs /var tmpfs mode=1777 0 0" >>$(TARGET_DIR)/etc/fstab endef define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR @@ -52,6 +51,8 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/var.mount new file mode 100644 index 0000000000..6b165dff6d --- /dev/null +++ b/package/skeleton-init-systemd/var.mount @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: LGPL-2.1-or-later +# Modelled after systemd's tmp.mount + +[Unit] +Description=Buildroot /var tmpfs +DefaultDependencies=no +Conflicts=umount.target +Before=basic.target local-fs.target umount.target systemd-tmpfiles-setup.service +After=swap.target + +[Mount] +What=tmpfs +Where=/var +Type=tmpfs +Options=mode=1777,strictatime,nosuid,nodev,size=50%%,nr_inodes=1m + +[Install] +WantedBy=basic.target -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:06 +0200 Subject: [Buildroot] [PATCH 3/6 v3] package/skeleton-systemd: host the tmpfiles preparation script In-Reply-To: References: Message-ID: <14736_1666122197_634F01D5_14736_488_1_88b7ddd5c7fe78927e68e2f29ea9c9e61e0a782f.1666122184.git.yann.morin@orange.com> From: "Yann E. MORIN" Commit 0d9b84b7a83f (package/systemd: invoke systemd-tmpfilesd on final image) forcefully introduced a call to systemd-tmpfiles as a per-rootfs hook, on the premise that would help with read-only rootfs. However, that did not account for the then-pre-existing handling of /var as a factory when the user opted not to remount / read-write (by not setting BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW). This means that, for users who want to use a factory for /var, the generated filesystem contains the factory files twice: once as stored in the factory, and once as populated by systemd-tmpefilesd. In the hope to reconcile the two solutions, we move the handling of calling systemd-tmpfilesd to the skeleton-init-systemd package, where we already handle the /var factory. Having the two in the same package will make it easier, in the future, to provide the user with a choice whether to use one of the other. Note that it is very important to keep the order of the hooks as they are. Indeed, skeleton-init-systemd sorts before systemd, so its hooks were registered before systemd's hooks; now that we move the CREATE_TMPFILES hook, we must ensure it is called after the PRE_ROOTFS_VAR one, so that the behaviour of acting on the var factory remains. As a final note: we chose the move this way, rather than move the var factory into the systemd package, because it is more related to the system integration on the Buildroot side, rather than the integration of the systemd package in Buildroot. Similarly, the other four rootfs hooks, SYSTEMD_LOCALE_PURGE_CATALOGS, SYSTEMD_UPDATE_CATALOGS, SYSTEMD_RM_CATALOG_UPDATE_SERVICE, and specially SYSTEMD_PRESET_ALL, should also be moved out of the systemd package, because they too are more related to the Buildroot system, rather than to the systemd package itself; but the frontier is very porous is either way, for such a package as special as systemd. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh | 0 package/skeleton-init-systemd/skeleton-init-systemd.mk | 6 ++++++ package/systemd/systemd.mk | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) rename package/{systemd => skeleton-init-systemd}/fakeroot_tmpfiles.sh (100%) diff --git a/package/systemd/fakeroot_tmpfiles.sh b/package/skeleton-init-systemd/fakeroot_tmpfiles.sh similarity index 100% rename from package/systemd/fakeroot_tmpfiles.sh rename to package/skeleton-init-systemd/fakeroot_tmpfiles.sh diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 970951d553..89a28d1780 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -58,6 +58,12 @@ SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_V endif +define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ + $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK + define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home mkdir -p $(TARGET_DIR)/srv diff --git a/package/systemd/systemd.mk b/package/systemd/systemd.mk index 1d7452de19..e4a8114221 100644 --- a/package/systemd/systemd.mk +++ b/package/systemd/systemd.mk @@ -739,12 +739,6 @@ define SYSTEMD_RM_CATALOG_UPDATE_SERVICE endef SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_RM_CATALOG_UPDATE_SERVICE -define SYSTEMD_CREATE_TMPFILES_HOOK - HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ - $(SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) -endef -SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK - define SYSTEMD_PRESET_ALL $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all endef -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:07 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:07 +0200 Subject: [Buildroot] [PATCH 4/6 v3] system: add options for /var factory and tmpfiles pre-seed In-Reply-To: References: Message-ID: <30918_1666122199_634F01D7_30918_364_1_3fe68afdbb79505161ac76e31e6054dc44dd340d.1666122184.git.yann.morin@orange.com> From: "Yann E. MORIN" Currently, when one does not enable remounting the rootfs read-write, i.e. keep it read-only, for example because the filesystem is actualyl read-only by design, like squashfs, then two things happen: - we create a factory from the content of /var at build time, register tmpfiles entries for it, and mount a tmpfs on /var at runtime, so that systemd-tmpfiles does populate /var from the factory; this is only done when the rootfs is not remounted r/w; - we trigger systemd-tmpfiles at build time, which uses the tmpfiles db, of which our /var entries, to pre-populate the filesystem; this is always done, whether the rootfs is remounted r/w or not. Note that Buildroot mounts a tmpfs on /var, and leaves to the integrator to care for providing an actual filesystem, as there are too many variants and is very specific to each use-case. These two mechanisms are conflicting, semantically, bit also technically: the files from the factory will be duplicated, but that may help in some situations when the actual /var filesystem is not mountable. In some cases, it might be preferable to have none, either, or both mechanisms enabled; it highly depends on the ultimate integration scheme chosen for a device. For example, some people will be very happy with a /var that is actually on a tmpfs and that it gets reseeded form scratch at every boot, while others may want to ensure that their system continue to work even when they can't mount something that makes /var writable. YMMV, as they used to say back in the day... So, we introduce two new options, in the system sub-menu, each to drive each mechanism. We default those options to y, to keep the previous behaviour by default, except the var factory is only available when the rootfs is not remounted r/w, as it were so far. We still hint in the help text that there might be some conflict between the two mechanisms, bt since it has been that way for some time, it does not look too broken for most people. Since that introduces more options related to systemd being chosen as an init system, we gather those two options and the existing one inside a if-endif block, rather than adding more 'depends on' on each options. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Arnout Vandecappelle (Essensium/Mind) Cc: Romain Naour Cc: Je?re?my Rosen Cc: Yann E. MORIN --- .../skeleton-init-systemd.mk | 7 +++- system/Config.in | 42 ++++++++++++++++++- 2 files changed, 46 insertions(+), 3 deletions(-) diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 89a28d1780..69991265a5 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -32,6 +32,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW echo "/dev/root / auto ro 0 1" >$(TARGET_DIR)/etc/fstab endef +ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var @@ -55,14 +56,16 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +endif # BR2_INIT_SYSTEMD_VAR_FACTORY +endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW -endif - +ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) define SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK HOST_SYSTEMD_TMPFILES=$(HOST_DIR)/bin/systemd-tmpfiles \ $(SKELETON_INIT_SYSTEMD_PKGDIR)/fakeroot_tmpfiles.sh $(TARGET_DIR) endef SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_CREATE_TMPFILES_HOOK +endif # BR2_INIT_SYSTEMD_POPULATE_TMPFILES define SKELETON_INIT_SYSTEMD_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/home diff --git a/system/Config.in b/system/Config.in index 888c24ce81..806a747315 100644 --- a/system/Config.in +++ b/system/Config.in @@ -154,10 +154,48 @@ source "$BR2_BASE_DIR/.br2-external.in.init" endchoice +if BR2_INIT_SYSTEMD + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs on /var" + default y # legacy + depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Build a factory of the content of /var as installed by + packages, mount a tmpfs on /var at runtime, so that + systemd-tmpfiles can populate it from the factory. + + This may help on a read-only rootfs. + + It probably does not play very well with triggering a call + to systemd-tmpfiles at build time (below). + + Note: Buildroot mounts a tmpfs on /var to at least make the + system bootable out of the box; mounting a filesystem from + actual storage is left to the integration, as it is too + specific and may need preparatory work like partitionning a + device and/or formatting a filesystem first, so that falls + out of the scope of Buildroot. + + To use persistent storage, provide a systemd dropin for the + var.mount unit, that overrides the What and Type, and possibly + the Options and After, fields. + +config BR2_INIT_SYSTEMD_POPULATE_TMPFILES + bool "trigger systemd-tmpfiles during build" + default y # legacy + help + Act on the systemd-tmpfiles.d database at build time, when + assembling the root filesystems. + + This may help on a read-only filesystem. + + It probably does not play very well with the /var factory + (above). + config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET string "The default unit systemd starts at bootup" default "multi-user.target" - depends on BR2_INIT_SYSTEMD help Specify the name of the unit configuration file to be started at bootup by systemd. Should end in ".target". @@ -165,6 +203,8 @@ config BR2_PACKAGE_SYSTEMD_DEFAULT_TARGET https://www.freedesktop.org/software/systemd/man/systemd.special.html#default.target +endif # BR2_INIT_SYSTEMD + choice prompt "/dev management" if !BR2_INIT_SYSTEMD default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:08 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:08 +0200 Subject: [Buildroot] [PATCH 5/6 v3] system: introduce a choice for /var management In-Reply-To: References: Message-ID: <4895_1666122201_634F01D9_4895_296_1_acafcb63e0879326a88681d7f3d27afeb31ccd51.1666122184.git.yann.morin@orange.com> Currently, we have a single solution to handle the /var content on a read-only root filesystem, and users can opt out of using it. We're going to introduce another solution (based on an overlayfs), which is incompatible with using the factory, so we'll have a choice of three mutually exclusive options. Introduce that choice now with just the existing /var factory, and a new option to opt out of it. Signed-off-by: Yann E. MORIN --- system/Config.in | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/system/Config.in b/system/Config.in index 806a747315..074fda509c 100644 --- a/system/Config.in +++ b/system/Config.in @@ -156,10 +156,16 @@ endchoice if BR2_INIT_SYSTEMD -config BR2_INIT_SYSTEMD_VAR_FACTORY - bool "build a factory to populate a tmpfs on /var" - default y # legacy +choice + bool "/var management" + default BR2_INIT_SYSTEMD_VAR_FACTORY # legacy depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW + help + Select how Buildroot provides a read-write /var when the + rootfs is not remounted read-write. + +config BR2_INIT_SYSTEMD_VAR_FACTORY + bool "build a factory to populate a tmpfs" help Build a factory of the content of /var as installed by packages, mount a tmpfs on /var at runtime, so that @@ -181,6 +187,15 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY var.mount unit, that overrides the What and Type, and possibly the Options and After, fields. +config BR2_INIT_SYSTEMD_VAR_CUSTOM + bool "something else" + help + Choose this if you have custom dispositions (like a + post-build, fakeroot script, systemd units, or initramfs) + that prepare /var to be writable on a read-only rootfs. + +endchoice + config BR2_INIT_SYSTEMD_POPULATE_TMPFILES bool "trigger systemd-tmpfiles during build" default y # legacy -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From yann.morin at orange.com Tue Oct 18 19:43:09 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 18 Oct 2022 21:43:09 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: References: Message-ID: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> While the /var factory seems to be working in most cases, there have been suggestions that it may be slightly and subtely borken in some (rare? edge?) cases, especially about symlinks. An other solution is to pre-populate /var at build time, by way of calling systemd-tmpfiles, and mounting an overlayfs on-top of it at runtime. This is slightly accrobatic, though, and requires a few hoops: - first, we create a tmpfs - there, we create three directories: - the first to bind-mount /var as it is, i.e. read-only - the second as the read-write upper for the overlayfs - the third as the "working area" for the overlays This is done with two systemd units: - rootfs-bindmount-var.service: prepares up to bind-mounting /var into the tmpfs - var.mount: a mount unit which actually mounts the overlayfs. Users who want to provide an actual storage to keep /var across reboots, will have to provide their own mount units and make it RequiredBy and BoundBy our var.mount unit. Systemd units courtesy Norbert, with slight tweaks and cleanups. Signed-off-by: Yann E. MORIN Cc: Norbert Lange Cc: Romain Naour Cc: Je?re?my Rosen --- .../{ => factory}/var.mount | 0 .../overlayfs/rootfs-bindmount-var.service | 21 ++++++++++++++++ .../skeleton-init-systemd/overlayfs/var.mount | 15 ++++++++++++ .../skeleton-init-systemd.mk | 20 +++++++++++++--- system/Config.in | 24 +++++++++++++------ 5 files changed, 70 insertions(+), 10 deletions(-) rename package/skeleton-init-systemd/{ => factory}/var.mount (100%) create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/factory/var.mount similarity index 100% rename from package/skeleton-init-systemd/var.mount rename to package/skeleton-init-systemd/factory/var.mount diff --git a/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service new file mode 100644 index 0000000000..e412a56c49 --- /dev/null +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service @@ -0,0 +1,21 @@ +[Unit] +Description=Bind-mount variable storage (/var) +Documentation=man:file-hierarchy(7) +ConditionPathIsSymbolicLink=!/var +# ConditionPathIsReadWrite=!/var +DefaultDependencies=no +Conflicts=umount.target +Before=local-fs.target umount.target +After=local-fs-pre.target + +[Service] +Type=oneshot +RemainAfterExit=yes +ExecStartPre=-/bin/mkdir /run/varoverlay +ExecStartPre=/bin/mount --make-private -n -t tmpfs tmpfs_root_ovl /run/varoverlay +ExecStartPre=/bin/mkdir /run/varoverlay/lower /run/varoverlay/upper /run/varoverlay/work +ExecStart=/bin/mount --make-private -n --bind /var /run/varoverlay/lower + +ExecStop=/bin/umount -n /run/varoverlay/lower +ExecStopPost=/bin/umount -n /run/varoverlay +ExecStopPost=/bin/rmdir /run/varoverlay diff --git a/package/skeleton-init-systemd/overlayfs/var.mount b/package/skeleton-init-systemd/overlayfs/var.mount new file mode 100644 index 0000000000..fab223c27b --- /dev/null +++ b/package/skeleton-init-systemd/overlayfs/var.mount @@ -0,0 +1,15 @@ +[Unit] +Description=variable storage (/var) +Documentation=man:file-hierarchy(7) +ConditionPathIsSymbolicLink=!/var +After=rootfs-bindmount-var.service +BindsTo=rootfs-bindmount-var.service + +[Mount] +What=overlay_var +Where=/var +Type=overlay +Options=lowerdir=/run/varoverlay/lower,upperdir=/run/varoverlay/upper,workdir=/run/varoverlay/work,redirect_dir=on,index=on,xino=on + +[Install] +WantedBy=local-fs.target diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk index 69991265a5..07a4180db0 100644 --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk @@ -33,7 +33,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW endef ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) -define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY rm -rf $(TARGET_DIR)/usr/share/factory/var mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var mkdir -p $(TARGET_DIR)/var @@ -52,11 +52,25 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR || exit 1; \ fi; \ done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf - $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/factory/var.mount \ $(TARGET_DIR)/usr/lib/systemd/system/var.mount endef -SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY endif # BR2_INIT_SYSTEMD_VAR_FACTORY + +ifeq ($(BR2_INIT_SYSTEMD_VAR_OVERLAYFS),y) +define SKELETON_INIT_SYSTEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_OVERLAY_FS) +endef +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/var.mount \ + $(TARGET_DIR)/usr/lib/systemd/system/var.mount + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/rootfs-bindmount-var.service \ + $(TARGET_DIR)/usr/lib/systemd/system/rootfs-bindmount-var.service +endef +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS +endif # BR2_INIT_SYSTEMD_VAR_OVERLAYFS + endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) diff --git a/system/Config.in b/system/Config.in index 074fda509c..0c064b8211 100644 --- a/system/Config.in +++ b/system/Config.in @@ -164,6 +164,14 @@ choice Select how Buildroot provides a read-write /var when the rootfs is not remounted read-write. + Note: Buildroot uses a tmpfs, either as a mount point or as + the upper of an overlayfs, so as to at least make the system + bootable out of the box; mounting a filesystem from actual + storage is left to the integration, as it is too specific and + may need preparatory work like partitionning a device and/or + formatting a filesystem first, which falls out of the scope + of Buildroot. + config BR2_INIT_SYSTEMD_VAR_FACTORY bool "build a factory to populate a tmpfs" help @@ -176,17 +184,19 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY It probably does not play very well with triggering a call to systemd-tmpfiles at build time (below). - Note: Buildroot mounts a tmpfs on /var to at least make the - system bootable out of the box; mounting a filesystem from - actual storage is left to the integration, as it is too - specific and may need preparatory work like partitionning a - device and/or formatting a filesystem first, so that falls - out of the scope of Buildroot. - To use persistent storage, provide a systemd dropin for the var.mount unit, that overrides the What and Type, and possibly the Options and After, fields. +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS + bool "mount an overlayfs backed by a tmpfs" + help + Mount an overlayfs on /var, with the upper as a tmpfs. + + To use a persistent storage, provide your own systemd unit(s) + that eventually mount that persistent storage on + /run/varoverlay/upper/ + config BR2_INIT_SYSTEMD_VAR_CUSTOM bool "something else" help -- 2.25.1 _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From peter at korsgaard.com Tue Oct 18 19:43:39 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:43:39 +0200 Subject: [Buildroot] [PATCH v1 1/1] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset In-Reply-To: <20221017094429.4752-1-neal.frager@amd.com> (Neal Frager's message of "Mon, 17 Oct 2022 03:44:29 -0600") References: <20221017094429.4752-1-neal.frager@amd.com> Message-ID: <877d0w7w9g.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch will solve the problem of the pmufw built by the > zynqmp-pmufw-builder where soft resets crash for the kv260. > Details of the issue can be found here: > https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ > Please note that this is a temporary solution as the kv260 > pmufw is not yet available on the Xilinx github. This is expected > in the coming months. The nealfrager github uses the same > licensing terms as the Xilinx github regarding the distribution of > zynqmp pmufw binary files. > https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE > https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE > Signed-off-by: Neal Frager Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:40:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:40:21 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_zcu106_defconfig: fix pmufw sw reset Message-ID: <20221018194406.2782B86E91@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=894753ee47596200104d4ba57cf29eed45aef2c8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu106. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- configs/zynqmp_zcu106_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig index 3d98dffe01..896fea0ab2 100644 --- a/configs/zynqmp_zcu106_defconfig +++ b/configs/zynqmp_zcu106_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu106/zcu106_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:43:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:43:05 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_kria_kv260_defconfig: fix pmufw sw reset Message-ID: <20221018194406.3238586EBB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b564a8ccf8016d4c3c285702b37192abe0852e4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the kv260. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Please note that this is a temporary solution as the kv260 pmufw is not yet available on the Xilinx github. This is expected in the coming months. The nealfrager github uses the same licensing terms as the Xilinx github regarding the distribution of zynqmp pmufw binary files. https://github.com/Xilinx/ubuntu-firmware/blob/v2022.1_22.04_1/LICENSE https://github.com/nealfrager/buildroot-firmware/blob/v2022.1/LICENSE Signed-off-by: Neal Frager Signed-off-by: Peter Korsgaard --- configs/zynqmp_kria_kv260_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig index 4700e651dc..25bab4cbb4 100644 --- a/configs/zynqmp_kria_kv260_defconfig +++ b/configs/zynqmp_kria_kv260_defconfig @@ -30,7 +30,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/nealfrager/buildroot-firmware/raw/v2022.1/kv260/kv260_pmufw.bin" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:39:06 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:39:06 +0200 Subject: [Buildroot] [git commit] configs/zynqmp_zcu102_defconfig: fix pmufw sw reset Message-ID: <20221018194406.1CD0786EB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27481c91131d19d5a4a673449fec4c312af6bae1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch will solve the problem of the pmufw built by the zynqmp-pmufw-builder where soft resets crash for the zcu102. Details of the issue can be found here: https://lore.kernel.org/buildroot/87ilqccu3k.fsf at dell.be.48ers.dk/ Signed-off-by: Neal Frager Reviewed-by: Luca Ceresoli Signed-off-by: Peter Korsgaard --- configs/zynqmp_zcu102_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig index 217fa0814b..66c24c4b64 100644 --- a/configs/zynqmp_zcu102_defconfig +++ b/configs/zynqmp_zcu102_defconfig @@ -29,7 +29,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin" BR2_TARGET_UBOOT_ZYNQMP=y -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/lucaceresoli/zynqmp-pmufw-binaries/raw/v2022.1/bin/pmufw-v2022.1.bin" +BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/ubuntu-firmware/raw/v2022.1_22.04_1/xlnx-firmware/zcu102/zcu102_pmufw.elf" BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c" BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y From peter at korsgaard.com Tue Oct 18 19:49:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:49:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/gesftpserver: fix build with gcc 4.8 In-Reply-To: <20221018170531.190643-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Tue, 18 Oct 2022 19:05:31 +0200") References: <20221018170531.190643-1-fontaine.fabrice@gmail.com> Message-ID: <8735bk7vzq.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix the following build failure with gcc 4.8 raised since bump to > version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and > https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: > In file included from alloc.c:25:0: > utils.h:204:48: error: expected ';', ',' or ')' before 'dest' > static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, > ^ > Fixes: > - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 18 19:47:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 18 Oct 2022 21:47:03 +0200 Subject: [Buildroot] [git commit] package/gesftpserver: fix build with gcc 4.8 Message-ID: <20221018194944.B10A486EBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=85a9a3f0e644556b0cd8f2126c6efa5d32695704 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure with gcc 4.8 raised since bump to version 2 in commit 026265bf7e09e0348aefa79e7a1f32add925f23b and https://github.com/ewxrjk/sftpserver/commit/dbbf0d45425a72a790d25b889ca2cfa909aaaadf: In file included from alloc.c:25:0: utils.h:204:48: error: expected ';', ',' or ')' before 'dest' static inline void *sftp_memcpy(void *restrict dest, const void *restrict src, ^ Fixes: - http://autobuild.buildroot.org/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/gesftpserver/gesftpserver.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/package/gesftpserver/gesftpserver.mk b/package/gesftpserver/gesftpserver.mk index b47ec1c5d3..5a3ab0536c 100644 --- a/package/gesftpserver/gesftpserver.mk +++ b/package/gesftpserver/gesftpserver.mk @@ -16,7 +16,9 @@ GESFTPSERVER_CPE_ID_VENDOR = green_end GESFTPSERVER_CPE_ID_PRODUCT = sftpserver # forgets to link against pthread when cross compiling -GESFTPSERVER_CONF_ENV = LIBS=-lpthread +GESFTPSERVER_CONF_ENV = \ + CFLAGS="$(TARGET_CFLAGS) -std=c99" \ + LIBS=-lpthread # overwrite openssh version if enabled GESFTPSERVER_DEPENDENCIES += \ From fontaine.fabrice at gmail.com Tue Oct 18 21:37:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 18 Oct 2022 23:37:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/oracle-mysql: add CPE variables Message-ID: <20221018213756.268341-1-fontaine.fabrice@gmail.com> cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql Signed-off-by: Fabrice Fontaine --- package/oracle-mysql/oracle-mysql.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/oracle-mysql/oracle-mysql.mk b/package/oracle-mysql/oracle-mysql.mk index f1f16abbb4..1086e4125f 100644 --- a/package/oracle-mysql/oracle-mysql.mk +++ b/package/oracle-mysql/oracle-mysql.mk @@ -13,6 +13,8 @@ ORACLE_MYSQL_DEPENDENCIES = ncurses ORACLE_MYSQL_AUTORECONF = YES ORACLE_MYSQL_LICENSE = GPL-2.0 ORACLE_MYSQL_LICENSE_FILES = README COPYING +ORACLE_MYSQL_CPE_ID_VENDOR = oracle +ORACLE_MYSQL_CPE_ID_PRODUCT = mysql ORACLE_MYSQL_SELINUX_MODULES = mysql ORACLE_MYSQL_PROVIDES = mysql ORACLE_MYSQL_CONFIG_SCRIPTS = mysql_config -- 2.35.1 From giulio.benetti at benettiengineering.com Tue Oct 18 23:46:17 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 01:46:17 +0200 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target Message-ID: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> At the moment all APIs folders are copied to target increasing the size of rootfs of ~190MB. Allow to select which API folders we want to copy to target to shrink rootfs down. Signed-off-by: Giulio Benetti --- package/mono/Config.in | 16 ++++++++++++++++ package/mono/mono.mk | 12 ++++++++++++ 2 files changed, 28 insertions(+) diff --git a/package/mono/Config.in b/package/mono/Config.in index 76178bcf9b..8690ee68ef 100644 --- a/package/mono/Config.in +++ b/package/mono/Config.in @@ -23,6 +23,22 @@ config BR2_PACKAGE_MONO http://download.mono-project.com/sources/mono/ +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL + bool "Specify folders to install to target" + help + Allow to specify which Mono folder to install to target + +if BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL + +config BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL + string "Mono folders to install to target" + help + Paths to Mono folders to install to target /usr/lib/mono/. + Only these folders will be copied to the target and not all + the built ones. You can provide a list of folders separated by + by spaces. + +endif comment "mono needs a toolchain w/ C++, NPTL, dynamic library" depends on BR2_PACKAGE_MONO_ARCH_SUPPORTS depends on !BR2_INSTALL_LIBSTDCPP || \ diff --git a/package/mono/mono.mk b/package/mono/mono.mk index 219effc5d3..8036d23205 100644 --- a/package/mono/mono.mk +++ b/package/mono/mono.mk @@ -30,10 +30,22 @@ MONO_CONF_OPTS = $(MONO_COMMON_CONF_OPTS) --disable-mcs-build # The libraries have been built by the host-mono build. Since they are # architecture-independent, we simply copy them to the target. +ifeq ($(BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL),y) +# Copy only selected folders +define MONO_INSTALL_LIBS + mkdir -p $(TARGET_DIR)/usr/lib/mono + (for dir in $(call qstrip,$(BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL)); do \ + rsync -av --exclude=*.so --exclude=*.mdb \ + $(HOST_DIR)/lib/mono/$${dir} $(TARGET_DIR)/usr/lib/mono; \ + done) +endef +else +# Copy all folders define MONO_INSTALL_LIBS rsync -av --exclude=*.so --exclude=*.mdb \ $(HOST_DIR)/lib/mono $(TARGET_DIR)/usr/lib/ endef +endif MONO_POST_INSTALL_TARGET_HOOKS += MONO_INSTALL_LIBS -- 2.34.1 From neal.frager at amd.com Wed Oct 19 05:18:21 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:21 -0600 Subject: [Buildroot] [PATCH v1 1/3] configs/zynq_zc706_defconfig: bump to Xilinx 2022.2 Message-ID: <20221019051823.26706-1-neal.frager@amd.com> This patch bumps the zc706 to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_zc706_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 82c47be7a5..e9b9e0264c 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/zc706/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From neal.frager at amd.com Wed Oct 19 05:18:22 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:22 -0600 Subject: [Buildroot] [PATCH v1 2/3] configs/zynq_microzed_defconfig: bump to Xilinx 2022.2 In-Reply-To: <20221019051823.26706-1-neal.frager@amd.com> References: <20221019051823.26706-1-neal.frager@amd.com> Message-ID: <20221019051823.26706-2-neal.frager@amd.com> This patch bumps the microzed to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_microzed_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 10a4f4095f..8115a34ab2 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/microzed/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From neal.frager at amd.com Wed Oct 19 05:18:23 2022 From: neal.frager at amd.com (Neal Frager) Date: Tue, 18 Oct 2022 23:18:23 -0600 Subject: [Buildroot] [PATCH v1 3/3] configs/zynq_zed_defconfig: bump to Xilinx 2022.2 In-Reply-To: <20221019051823.26706-1-neal.frager@amd.com> References: <20221019051823.26706-1-neal.frager@amd.com> Message-ID: <20221019051823.26706-3-neal.frager@amd.com> This patch bumps the zed to Xilinx release 2022.2. Xilinx 2022.2 includes: - U-Boot 2022.01 bug fixes - Linux bump to Linux 5.15.36 with bug fixes Signed-off-by: Neal Frager --- configs/zynq_zed_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 34e1b67184..26109b7b7d 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynq/zed/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y -- 2.17.1 From thomas.petazzoni at bootlin.com Wed Oct 19 05:41:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 19 Oct 2022 05:41:10 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-18 Message-ID: <20221019054117.D129F41BB4@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-18 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 7 | 0 | 0 | 7 | 2022.08.x | 14 | 19 | 1 | 34 | master | 151 | 341 | 12 | 504 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 18 glibc-2.36-44-g2628500f5dff... | 17 host-sentry-cli-1.59.0 | 16 host-f2fs-tools-1.15.0 | 15 linux-6.0.1 | 14 brltty | 12 sysvinit-2.99 | 11 autofs-5.1.8 | 10 crun-1.5 | 10 host-gcc-final-11.3.0 | 10 host-pahole-73383b3a39afe86... | 10 systemd-250.4 | 10 xz-5.2.7 | 10 igd2-for-linux-2.1 | 9 btrfs-progs-5.16.2 | 8 libglib2-2.72.3 | 8 casync-4ad9bcb94bc83ff36cfc... | 6 efivar-38 | 6 dash-0.5.11.5 | 5 host-binutils-2.38 | 5 libarchive-3.6.1 | 5 assimp-5.2.5 | 4 gerbera-1.10.0 | 4 host-go-1.19.1 | 4 linuxptp-3.1.1 | 4 unknown | 4 batman-adv-2021.4 | 3 elfutils-0.186 | 3 host-binutils-2.37 | 3 host-binutils-2.39 | 3 libgpg-error-1.45 | 3 linux-5.10.145-cip17 | 3 ocf-linux-20171122 | 3 perl-5.34.1 | 3 xenomai-3.0.10 | 3 cairo-1.16.0 | 2 gobject-introspection-1.72.0 | 2 host-gcc-final-10.4.0 | 2 host-gcc-initial-12.2.0 | 2 libcap-ng-0.8.3 | 2 libmdbx-0.11.12 | 2 linux-pam-1.5.2 | 2 lxc-4.0.12 | 2 mesa3d-22.1.6 | 2 usbguard-1.1.1 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 acpid-2.0.33 | 1 alsa-lib-1.2.7.2 | 1 apparmor-3.0.4 | 1 attr-2.5.1 | 1 augeas-1.12.0 | 1 brltty-6.5 | 1 cppcms-2.0.0-beta2 | 1 cryptodev-linux-1.12 | 1 e2fsprogs-1.46.5 | 1 exim-4.96 | 1 fdk-aac-2.0.2 | 1 fontconfig-2.13.1 | 1 freeradius-server-3.2.0 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gensio-2.5.5 | 1 gesftpserver-2 | 1 gsl-2.6 | 1 gst1-plugins-bad-1.20.4 | 1 gummiboot-2bcd919c681c952eb... | 1 host-delve-1.8.0 | 1 host-gcc-initial-10.4.0 | 1 host-gcc-initial-11.3.0 | 1 host-rust-1.64.0 | 1 jack2-1.9.20 | 1 kmod-29 | 1 kvmtool-f77d646ba01d04be5aa... | 1 libcurl-7.84.0 | 1 libdcadec-0.2.0 | 1 libdill-32d0e8b733416208e04... | 1 libgcrypt-1.10.1 | 1 linux-fusion-9.0.3 | 1 linux-tools | 1 memcached-1.6.16 | 1 mongodb-4.2.18 | 1 mtd-2.1.3 | 1 musl-1.2.3 | 1 netsurf-3.10 | 1 ntp-4.2.8p15 | 1 ocrad-0.28 | 1 openvmtools-11.3.5-18557794 | 1 package/openssh/openssh.mk:... | 1 pango-1.50.10 | 1 perl-net-ssleay-1.85 | 1 php-8.1.11 | 1 procps-ng-3.3.17 | 1 pv-1.6.20 | 1 python3-3.10.7 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 reaver-1.6.6 | 1 scrypt-1.3.1 | 1 sysklogd-2.4.4 | 1 tealdeer-1.5.0 | 1 toolchain-external-codesour... | 1 traceroute-2.1.0 | 1 uboot-tools-2021.07 | 1 valgrind-3.19.0 | 1 wolfssl-5.5.1 | 1 x264-baee400fa9ced6f5481a72... | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/34d18fd284627bdb593fb7d833be0666f0520800 | arc | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/14315c1045e8779cff10a004eb72acf3d5d14e0d | powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/700177e585c52ab85ce1f2d3fb28b015f91a9d7c | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/0d3657f11b6f8997d9feccfc9d6c28a9c445a0bc | mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/418bf0b1e012208f6838767d4b2becd51b86e8a9 | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/f57f70122535f725c66a835abb6925665e444797 | arceb | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/a0569f11c31642625edf56856ca4a473183c63bb | sh4a | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/90acbc0ac1704b7f51dbdbd7061201a85537c8ba | ORPH nios2 | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/9f77387212f680bbd826cf7985f41c3d16bc56c4 | ORPH arm | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/785376f863ecd19e622cac5e2f5dbc60cb38a807 | ORPH mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/04f402f29b94a6e30b17956950fb4794151ab5cd | ORPH mips64 | attr-2.5.1 | NOK | http://autobuild.buildroot.net/results/b4e2146a1b5adfb87094565779c1a9692becd129 | riscv64 | augeas-1.12.0 | NOK | http://autobuild.buildroot.net/results/b870bc8c6093aeff98579b3a62139c131da2ab94 | ORPH sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/28336bf79f5191fc78f67a59311024838df3c853 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/188fbddffc6802c445e2a4eae9e83b0b5a40db06 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/be60a4d35b35307e67ef8a0c0421b3fe196e3e97 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6c7d3f65e798787c858851fd3d4037ef707aa92b | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3550c4a4cb3a86ee823c8b95b3e7152d82f66ae7 | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a630be428abcef270b4a59a9bb6994ca29d6b670 | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2b8639ad906b5c6078efb3fa6d908cc9775d1ef2 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ea885421a5a03acb9a1f62b545b8cb654c659e27 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/623b2c63466c8485e9f0d2e0a8e77ef50f0692b3 | sh4eb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cfd4229c3ea6397c395d86961e47ccce1f602f59 | riscv32 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/93fc048c8f2ba1c78dcfcef89d2c0940fc0dd19f | mips64el | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4ebe1c17d8284237a26370b0593be0dbbfeae14c | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/4fc407e56c99b23225cf4fe5f9c21913c51f3072 | mips | brltty | TIM | http://autobuild.buildroot.net/results/2302771d580a2ae1965993b000504dac2a33db13 | arm | brltty | TIM | http://autobuild.buildroot.net/results/32829a4ee398444a414b72f11daeaf585e638e62 | arc | brltty | TIM | http://autobuild.buildroot.net/results/44df7848aacf43e9da7337f73ccfcf5ae0b79e67 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/f042cc115659339bda2da446def7d1e8c6ca7257 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/d3190ac8d39ea0f1a7ef3cfbc5a237430ee194c8 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/6116b05c4f27399fb491abe5c06ef77a414cce57 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/2ca9de7e1d36457d6a05357120ba356684e1245b | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/b02b45dd7a6c7a47a2246fcf0b257b618cb30424 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/5a69b8562fca8227e77dc0d4ca4fc8ee9537f658 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/a3c3f42b72b540920873cf233b5adfdd5f965059 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/0b0a1cc22051abf1e577e8710bd6d4bdb2decee6 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/c9df3f49688b2034e8f63cbfbed25f45b302d06e | powerpc64le | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/45eb39e88798ca297aaa41dd9cb09afa6e7a201a | mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e9662b9d3f7918c29201bd6006095e0003769e93 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6e3f58188333677918ff23fa26950203bcbcf17b | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/097fb3c82be2817a6f128986cf86004d2ab1bcd6 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6697e5b21801d197ddcfbcb5cdb42cb62ac57608 | ORPH microblaze | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/2af4e5cd527d7deb0d03a59973571f0247db8bdf | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/42cb775a9f921091b11dbac3bd8d1e525da700ac | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ff9576129b0acc3b1a6a13ad8d599c83998a1912 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e8c0441d28478c613f3cd2a856098fa96f813945 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/bb0827eda406cf973a6c2c17669813285407b667 | aarch64 | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/57bf6a6f92f28d54e0c71d0353526e7533a58d4f | arc | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/5521e13b3dee3f16d5ab64a658616ee69f002635 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/15dde583da654f38ab24bdc0f2364ec546365574 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/8671225998ba47f90ea3e01a10830c61bdbf5d9e | nios2 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/4c0a4a4cfb576448463795fd8f60739ceceefe11 | arc | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/ce8b6b89781196c89eaf5c9014157240558c6e88 | aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/e69c9b374203f375226ab719bc9f3e5642f1bd29 | or1k | cppcms-2.0.0-beta2 | NOK | http://autobuild.buildroot.net/results/00bc902f9e93dcd94d7f4b0573ec41da132835ba | ORPH arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/72d35382b9af437f63f9b22a42b31aa20b0016a4 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4b1ac8aec00c044d1ecba1795edca94a97519197 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/65ad72518ff469a9b0a939f1d68f7aa43def0ccf | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c17d2a21a05517036be3197be8e6574ebc323b5d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ee79feb6ec4564b91880c91eaa77c194ed001c2e | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e228bdc8c275403bcf1c404f6c27808615cec27e | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/81f9e76fadc44596d37f9b8e109989336d98c3ba | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a789b3ffa7f90fa24695015317562695acad5d29 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/88adfc26d948bdea3997125e31d7bd65eec5e3c3 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ba610af39eec8067aa17abf7ea983099d68c4a54 | mipsel | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/bb73a973a03348644cd847aef9d0137e8c065baf | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/66cca6852e924dfe4138997271b5663ef2457051 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/938a1e425d91ab69e1b1ff69fb15a2776959e07e | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/40b905955e7548f43dc61e09972a44cdc5d28084 | ORPH sh4 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/85e072c4f105a25d987e874286bbf0139a163004 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/eefbc09173d8363a4fea289d12e4f4e89cd2a47a | ORPH or1k | e2fsprogs-1.46.5 | NOK | http://autobuild.buildroot.net/results/69168ddfa9edd3ef78c74ced61940e6b79e9ec78 | ORPH x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/856d2ef018090c564b53b79e14e3b0a74492a6b2 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/177797c29829b63b0ea33591850c4f2cf3e47fa9 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/b826a0c7815b4589780659251f83a507da491c06 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/ce31ea71f04fef3f263e72e7b1cac86367b2b248 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/900eabc70a88ef0514917b9c91c9e06436e22250 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/8a4113ec94301dcdf6654b9a9ea7c21229c48df1 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8f0356f82a27c78e7eefd9775648e04d245e6518 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/534825288c912dc8aeaac3310c86819a5e3a67da | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/55c1aeb20ef60910db0818abdff122c7966d1c76 | ORPH arm | exim-4.96 | NOK | http://autobuild.buildroot.net/results/31af7179d01f68888e75b92fae359fc7d8cc5afe | arm | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/8df59c82591412248da2596ce51b1b852c24d588 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/bc8770486dcd560a56abfaf2f19770eed1dc2823 | ORPH microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/0330d42bab234ff613a85df7e3747844d10708c2 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/ed053af5e995c2ce2ca34a172d939abc63caece0 | mips64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/3776adfeef0a721d7e7dda954fdd5369b68ffab5 | mips64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/2af6801cd9610d8f9a47852348970ef3b8fbe7ca | x86_64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/28e95f5c537f561337bf7f22fa45fab239ccb776 | xtensa | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/217c042c9e08bbf9ce714a6f19895b5552742632 | or1k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/5f43787e45216b4950e3e3e197ffdc05a47f6a75 | mips64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/8ac7be703435af21e9c0e4f9410d79d7ca3a1820 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/d16a735c77fa23e5dc59bc2b2b0ed669a78caae1 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/0501474851f011d18dcfd92ab9895ba247418572 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9eb3ad8c04b77b6d5e48b03649d84b1df990639b | riscv32 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/aa941983a7ffc240b219d20622c6a1442a227171 | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/57c5db58acfffaef3a3b9bcc2b780bcedb1988e2 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/e454a30a607322c706a8218bbb1a544972f2c6cf | arm | gesftpserver-2 | NOK | http://autobuild.buildroot.net/results/2795213c07c4a961cee0ae7a4e7cccb8bcd6f68e | ORPH x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ee3337566150f1d3d90f011bf0a5e0db9eb75637 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/77d47a0c2ba7e91508fb9945328f68b4d61b8374 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02cb1cd2683f2bbdcd37cac98bae2493b3211d11 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/08ced72efcaccefc68b7c34bdd52f43e490ee12a | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/cd06577e10e1d0d2a9017335f1f97437252b4ab1 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/39de331cfc3338feda5234b706b359cbc06c917b | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/de1f7c94466c06e56ca902bccc42e310377e2ad9 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a144107556d784fc9f6cde29c1631db5cec15fb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af6373b9d2f3230ef5042241a533903e293bb3e6 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7ba9ad9a31c42a179ad7551e17aab5c9db2c95b0 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/519d616b18b2c111efb0d6c33544dcd667f6076b | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/38954f19fed10838b9f0f5c638d94f2f6cd1b6ba | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c598c81a366135f0fa6bff97e3c601769861de51 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/200cf19cfbb125bd46c2433a72e6c335a073daea | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5cafa792a55f794713ae011f2b5c009b82de6dc8 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2f2e464ccb8b329bef5449ec0d4ca1fee3e2fcb7 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dbf6a71d9d5c0ba164b78300edf4f9fe608e03ee | or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/671a7f791f81bec7338453e15b7af04d80a0648c | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4a524f21898ce0ed4f54f55454581535353cd718 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/1427fc76926c65a92d135f246eb3116f7801be96 | ORPH riscv32 | gst1-plugins-bad-1.20.4 | NOK | http://autobuild.buildroot.net/results/9db614deede389c49f66c742e60c5a04b90d304e | ORPH i686 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/ce0dadc77c874ad4de64c7b71fc9a668c3c226b1 | powerpc64le | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/084ace7677d7ab3abe17f3fe0819449d42ee8a79 | or1k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/9ffdef1beed12e9baa383918bb5eb220cbc6e2aa | mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7f720f946137277ccbb18833c31b8f33126c0c1d | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3e865de7f17a4833915b8231cc7fea6fd26f8218 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5207eb10cca89ba5752f5d4b846bf93a7d67fee6 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b4dfa1b5802940fb410900a2200509528e20e57 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5dd829f9e387943254773d5fb75c2ce8c629717f | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/05d599d76829a25ee7aea0793fa1cca2740b2a9c | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/d054b1bc46eb11fb92d9578846e2db8dfadf5adc | armeb | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/e66505dba84125f164dbac59c93846857216e983 | riscv32 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/daaca7d2ba559a5b4a51e9f273ff4cb45670ca78 | riscv64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/b42ed204b10cdfa5ecbafe661426d22e6adaacba | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/17437dc7c33d4a52579f8841f9e713aff62573b9 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/73553950eae577e084a9ccccbf21afce480a9c2d | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a4932e0cc67a685af1a37030666f8ecbe7785566 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9fd668afd97b8394160f9199e5cb63b05bdf757 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d8804e1dd9d3f873b8a8efbd9784c75c45d91de7 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a91534ac3e06f02cb88d61395464df2510267db5 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/757e1026faf6a5d96e9f495c75b4f8f19775d2ba | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c902b83facef09442d9cb058a744753c2b5801b5 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/304c1e5196e175ecc09924e6893c17cc1d96ec8a | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e3c4932a7f84a593274df3fed2e09b06657215b6 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d408b4171c0f9a056aa2d38c97563e7e25b44d00 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/68bb66d124dab3ebc8c1649c699357821d414c86 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd90ed14eae2500b9bc769e883f5c15734072111 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0e55f4b07bf2ebc0eeeddb68bb9b0a345b9b1660 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bec76a3d8ac9441f5c40f420eb8ddfd08ad6031b | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/5bcefdb6bcd96a602337255c4b0dfc5dd14e4ad3 | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/1fbd39a9f6437c7f00da0e5b934cdd9a8990701d | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/7bf503151fb21a2e6e7d0996e946fd3744cd64b7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3046afe05bdfdc8d110f63d107803850a8a4a8bb | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/866318b01ddc0c3cc9201465bfff5c7955b3970a | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/cab5d67ddf92938e1cd14145b1222f346381aab8 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eba6ec4b46ec1e185b914076d9aae5a20cfbfc93 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/6f673d94fe9e29cf0bcf720f8cc62385c56a78e7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/4d9d79e05693318cf1a20543a9c4dbc4dcc09b8b | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/d700648dc17e3f47463303eb330dbf93a7f4a70a | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/eaa9bdb72dfaa43453f98993dedb8f2abad44cfc | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0900ff5784f411113372fe5304dbc00d70ee4446 | powerpc64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/451ef03151fafc330bf1afd62ca004f9f72ef19f | powerpc | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b357f5365c5c7e11ff0d2f47a03d01135852576 | microblazeel | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/9422578eb1d86d0371dbff26f3ca2d42d6333bbf | x86_64 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/8bd14cc5499fcabd81d11fb0ed8833759b78bc52 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/10359024f706e2d3ec0de20bdeca504cc8c71698 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1e07ab8806658601f51d25544e285222174e23e9 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/2656fa69c5a2a3e2995121a1d429ee655e0cb4ee | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5c3508aa93391370b02dc17a1e0aef941aff2c43 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/33bb157d1b43406c23cda0fed32376013b7ab64c | m68k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/568e749d5ad7086751ac4d1275ebd2bb9a851480 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/1dc88850c6bd6593a79b5694f874111a30d1586a | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/87a7260ac018e193fa81c2bc61d5224eadd0439b | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ee4e5e8d3f2e1cbccccb9e8b09ba7407de6dfe82 | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0bf0728816cb16e25ab156b7e29ec535acd1a3c8 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/333ea21884198910c3933dd90520190daec8af9b | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b265101ef8758b92e6821821617373726258627a | xtensa | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/124739328dd6fdc48b73c1e40415ddc29b3be752 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4c8f6a09d463363691b5db5ae611cc65ff2e2f36 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/883dac69ab52b8d49936695fd047ad600db3f5c1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/946db68ca1d8c01e5fb2f15eec6dc485983daafb | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/367d79436b9563d92d96bd8703d5615c3c329cd1 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed2522fc550ae808512d10592d857bee91b0c14e | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bc0f71895fa40b690f4a4ff55b8bd5a98c664ad5 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f1e09fa6b67f4b4ca0ae24da5f2966ce03151562 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0b3b908c7fe4e86e2f9e710f71bf3067102f61a4 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0ff07390d80e492470c7b75bf4c640c2f7a8c436 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e03becdd7b7b778188d0234852a6ad6522d413d7 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/782c7b234c56672c1d87d546362bf6d4565d1187 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d3481e67abb0bf29284369ef9db5104895e63525 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/e2a71dd615190358ae043f06800f0e9c0940b8b8 | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/043c43c06d29c33cf8c589877df180a0831197ea | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ead3f0afdfdd2abf3c4c2ecedc00c85d497afffb | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/510df43fb8657b5d67a43f34b04fae6dd44ebc1b | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/41dc09051a370205bc51a5525e1d3d413aaf6335 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/97bb174f7a594a516aa55b5d56a8092ed9085b66 | sh4a | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6e61163a5d98103b60827be328a3cb374d315d5b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5e8d215b4b2faed55f72aa796a7439bed1a60153 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/aecab3caa6633e38a746375be453e48b88c5d1b8 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b922a96cd8a2bf16916230fce78c8273ba8396d5 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/be9a73ceb229fc46ae15dfb7a0dd1a900b0bc9b2 | armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a6ad4adab849b26b94a2a835dffed162706e592f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d1f771613f55c14bdcfe44a9c8445b6882d1a65c | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8ba49861848d548640374985103e4da77a8a5e51 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/144531410b4a8e08f25d5fee18f4223fe4339a20 | or1k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/cd98dba9b023b5a77de3f5a331cefaeae73116ab | mips64 | kmod-29 | NOK | http://autobuild.buildroot.net/results/d56205797a77af668574c143394f470e100f8b5a | x86_64 | kvmtool-f77d646ba01d04be5aa... | NOK | http://autobuild.buildroot.net/results/0aec0f4a8c755506b8a196701018b23b52361299 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7d5ff16630923a261ffecbaba23c149b1651816e | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7095a304b6f489ea526ca7c1fbc16742ec36d70b | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8e05a591b21d723437ea565e684e2d6949216681 | riscv64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/584f1ced58ea77896713abbb56d9426a5a031690 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d1d1368db8472d01423e92a0b083e043c5b72b27 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/80d0bb5ba9313f3892c98582478849d32724908a | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/c1bc63decbf82b4df4108410b959e215052b6178 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/3a2a613fcdc8e47c77f524e7b0034052aabfdd8a | arm | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/ddb6da55c417ffa3892b6b0f4dc0eefb796f964a | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/7c4b1c42ea71141a5e4a39d05899da372793eb34 | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/56a77d1bdda169d2b57f3d3a1dfa34f6a80dc776 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4e979fc7f04a6b883acb6c36d9b4f1819543aeec | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e07fa45d86a0be05c4000a3aa3efca142786b382 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e07e704c8439a9e47423de0c3919adb6ac7b2b46 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/e315dff0e99bdced3c2438efded6735d17754e90 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/58c24e82f79129081cf6ce1a4616ff37116029d0 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4f8d9bce83c83268352f06002fb37223ef593b97 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8391bf2242c2941208b94588ac72c03c79763436 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/098a30553d9c7cb34aafe04e05f284cbb1cbe577 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ddd23fd9846a40ac3838c497f04f8bd3b6261144 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c32b65655415a353c4b5e9abcf19cb16e7875546 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/485d6e6b83c938cbb078dad06450d431ff373c7d | ORPH microblaze | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/d85d1cc22198f1c070fddf8ccd0afabc92ad51be | mips64el | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/1d8f5c13af8308a2b03e63037bbbc3a4e4aa9d4d | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6a267022b08ac756edab2f5ea44cdf69293471ff | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f27b2acad774a07bbb43521fb48065bbd8c377af | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0442abf8cac36d0c6d541a30fd52a1d9813e8f96 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/637cc53f5b49f5aa8bebdaa67e6e70db24298e82 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d0cab4303cd198686e4ff1b4642018f0f0fda435 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ae6ebe942b57d70e044bd969e0095927827c3538 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5d15bd85f0ed426ba344aa96b9c6599408118cc1 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c15ce5d526a88e55f7afd380eeac975c3504625c | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c41fd7d77cd72c3644c9c5d17e20320f72e24be3 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/61c69ca25cea151f48c2a89111ea8f5ea06710e1 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d61ef100e56d98bece62aca0e3ac29dbc08eb164 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/936245aa3f382dada6a3b86552bafb53f88c5687 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1b53d80ab3a44658b59029de04e1f9be84601983 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2de081ee64c5ab9ebb79d4a58beeda0bee9deb27 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5f5ce7dca30d171b69028b30f396ddbd81e45950 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ffcc34eb2d8b48b683e67a105fcf817477747719 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/85f254cb6c2d2b33842dafdad9291ee0bef3c43d | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6df9d84d31c8f865cd62b6f4da340331193fbf4a | i586 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/79410509ef985f72ce2213a179f42bd3ffed5ca0 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/127d8847607eead74938e87691193408e57274d3 | ORPH mips64el | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/31f29406ef0810faf0f56c528591934c92ce80de | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b569f70f9cc4fcd7e8c0788e3103e2404884dcb9 | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/89862aeb0864027c95f5cbf95c2d92e6da6a3a10 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7f850823d88a435495017906dcaaa233fde5221c | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4297563694f9b4360e61d09ff0b7d87a35015db1 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4fad9041b1a0a7d5ebeacb33113dad5146b477c8 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ffd39687c2888c8735f8146a6eb2381633737f6f | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7581a3c3e15507b1ea2db9ea46537df2c28fef1e | ORPH sh4eb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/20555660a089fe5300cfda2eaa034a87966e86bf | ORPH armeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/0882f8af1f82e571074fba9c6bac6e17c4cdf42f | ORPH riscv64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d216f65caabefe9e736b133b999e71fe3b07a291 | ORPH aarch64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b88deebd1196dddc15dadbb501945ab778784a4b | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b78c743a9458a7d2d36780b8d110c14740a80087 | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/be0958c97c94379260eb4ed1355bcac68a9abfdf | ORPH xtensa | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/657dff29f456cd65b731d9815f6237981f2fa9fa | ORPH powerpc64 | linux-fusion-9.0.3 | NOK | http://autobuild.buildroot.net/results/0a20ef40a34efa00978fac27eb4123f657c062be | ORPH sparc | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/081700482007df4e538ef56a57e14d4c27d09abb | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/098c9ff57e1a968caa78e80cb24941cbc901c92d | ORPH xtensa | linux-tools | NOK | http://autobuild.buildroot.net/results/09aa73a0f13337dc80788ac5362b4d8aa056ba10 | ORPH or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3d18f0a979638cb0ccd8379273dc1f24bf0beaba | or1k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/b1188e7741dd0cce71189d4129330cdd8cd9ca94 | arm | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f1938d4dce340ac75e6d2f582048d11c42c362db | mipsel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/86d767036402e0a97a695c403f0200ceebde4092 | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/37084a9e56687919d67b5b329f5e3d400862b7db | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/f0bc5051676711ecea609b217f3c8398806ed8c3 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/580be0d45e5bc241ee9c9d27c48acab416ef4ad4 | ORPH or1k | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/edf3700b281a450e82a259a79613749f6a559cdd | powerpc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/cc5bdca284e118b28d89b7d3812b230397f27434 | arm | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/cab2919965d9b6e00dc1abd3aea5b310b398e961 | s390x | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/1b347e11d21343a948f2ccd7f2c59318c3b8e011 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a0f6a43ff86c5276d78d4285dfb293f5315ba51c | arceb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/3c413978d830f3b7d3e5fadd08ae86a8ff821500 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c0688481f48356cf50197fc0d566fc3535ed165d | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f308c3f0b9e7f9e69f3b29d699b0f37379e4f10c | ORPH sh4 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/28b7b4850fe7c6fa8480a246553e7ee62d0b724f | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/497023cf0881c73b4bef5552808273fd0013e6c9 | ORPH riscv64 | ocrad-0.28 | NOK | http://autobuild.buildroot.net/results/efd3f3f843dee8c22c7360dbbdbce54756d87e3d | x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/dd20080b3a4343d3443df825456bfa5dcb4a3c96 | or1k | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/9f1ac31bb5563046757d282179e2af6877916e63 | x86_64 | pango-1.50.10 | NOK | http://autobuild.buildroot.net/results/d488649ddd0b3cf0ea1fad34f05117994c26e9e0 | ORPH sh4 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/d0c4b04c5b4c3215d11d9c90faf8b4830eee710f | aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7280e4c40eebae171325316b1a0c12d5734e81c4 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7d5dba211c6a23c04260bf346d0b1d2ddde00653 | or1k | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/12764dca40f7c8d4c8fbda98b6c7b68806bd9e03 | microblazeel | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/a3c20e9ae226a8e0c9ca4bb85f3bc4d9487f5cef | s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/022492f792a77428a28d8b79346bbc95c64ba9c7 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/e986c4701df0f387037bb5b6594b6df0cdd7f7b6 | ORPH arceb | python3-3.10.7 | NOK | http://autobuild.buildroot.net/results/46da889f314ba007a77798276a7c59be46fdebe6 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/e8683aa24fd7d2addeff1afd530dc3d30994f8f7 | sh4eb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/2888b4699cfb555c7618c41b0b4ace56c1196e11 | arc | reaver-1.6.6 | NOK | http://autobuild.buildroot.net/results/d5dc63afcbaba25e175a29f36e4b046edd79dcaf | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/de7f03abfde0602249d6f2d012c2b202d2a14658 | xtensa | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/477fdd82ef1f1d900aac6fba41471338a99dd30b | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/3c071dab091d0996232c07169bd11e454a7a414f | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/46d3f73cd451e10c935790eeea17eaa0fe52d3a4 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a6d5faa0bb86007ecfd442ba36fbdc32b10f4e22 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/655abaee1501ea98c41dedc12acfb734c0f3b82b | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7d4a1bf54903d158fac5671d56b34d337beb144c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1285ca1528f16dece64ee04495bdc7f8848a4323 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/065b213dc4074614890c0eb59b95dea9ae75177f | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cf4a285bfcdd4d00a17faab8b8fd908552faf286 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/16b6b753871ccd47a883d8700cf6a85a06b01c01 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/048cba6cb795fa0d31d3f29caefdbdc8fb835a08 | sh4aeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/de61fdb89083173fdaae82b603a287713434400d | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a02b4545cb0865a98403adef86a219a3c8ed62cb | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44027f46165c3224d550527b999e8ef1674236bf | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/99d79e36eb04df73d33eb62df901d2ee2acfa117 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1d81cede31ccb30f1df14ddf8799b8a9278c363e | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/048b26cd5403fc189b62ec20a014ded65eb795d6 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/971f12e4f770a3c5195a1b5a03238f4cf2a57e9c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/55dfc37fb703fcbc559d294f6bd88ae6fe157b2b | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/322c00d563da18a60b5711a8f170642d79c28b2c | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1ed6322f444aa5b903c69e5ef02895d7560bd5f4 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f41469b610a9e3d396aac402750a6dd830eb1212 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/9eb128b57b5a9f658cfaca2d3c3774d6aa38b5f3 | arm | toolchain-external-codesour... | NOK | http://autobuild.buildroot.net/results/2cddaa30895583d963be931b4e7c3f6e06faab5e | ORPH arm | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/f274dd2db445a04fc098b51ac327d1d2b61eefab | aarch64_be | uboot-tools-2021.07 | NOK | http://autobuild.buildroot.net/results/96206a6910fb267b22b0da8b8b0e5c185885c3bf | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/b5b698701f00de42aea9f15b1ce5f00eebe0cd51 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/9599892eb328bb989fa37487e9ab96a50141c487 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/0cd180cf4546fc6ade4bc1dadd0622ca06ca0709 | m68k | unknown | NOK | http://autobuild.buildroot.net/results/3134f0a93b22781d0b02151053ad24f4c8fdd0bb | sh4eb | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/28cdd80137f495d2243ed171e307f86025e2b5f4 | sparc64 | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/411bf698a838e847aad40901433c224464093894 | powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/0d7e0b77b264bf61f8fad55e406152fb93a45b01 | ORPH mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/cc2bb23abc306f140728a325e6766ee2a99eafd3 | i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/e3f7275e458db1e8725ca2356fd0d48782d4b7dd | sparc64 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/fe2be0125d0ea4b6d50ee3637102f741225975c5 | i586 | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/98a82742bd341e727e776f558e66ff628fef6265 | powerpc | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/85dfe2c54f9e99502306e8c19301ae93e64886a8 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/760a6ec8d28da2dcc8dfbc553cfb8b3d4cf0265b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4ef269fe078b3943b325c185873a010363f6f781 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/695cd46547965b0ae0a90c9a5b28aa537dcc66a1 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c3ef90f8fb91fd75b6d96ca41a32267f721c0fb3 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c56d5cc9ab845beb0fbc92d7b805f0920b6e54b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f2351aa970d67df19bf7e3e6e8455901819d9afa | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/65ee32dc9e124bb5cc9c816ea5b2398344691c76 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7067657c3c20e3116cbfdb029d33bce1e79f34fe | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2e47cc62d9bc1d826a74490a80924775387b3f14 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f7851622c5280fd9e219b827abd63bda756e748c | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/1641d915bbfce043eb82e2c50d8b34b975c32f94 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 2 igd2-for-linux-2.1 | 2 linux-5.17.15 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 erlang-22.3.4.22 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 openssh-legal-info | 1 package/openssh/openssh.mk:... | 1 sudo-1.9.11p2 | 1 unknown | 1 wpewebkit | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/75666e33f18a966451adb9ae88e2e84a1a961d84 | microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/bff98d772d24dcbd0ed6203bc764c47c1e6be3e3 | powerpc | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/d4ea60a504890776fdadb7d95ad8965f90a82242 | m68k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a411c934ed7494469c64f10faf33611d267f7da3 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8fa2baf3c0ed11b1b2a76bdc9ed1261d324b7a7a | mips | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/e4bdbed052d89c2aa80869b861b6f7f553f6e089 | powerpc | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/3b7571dd73a220e941744f7dbc8dc08b88dac591 | sh4 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/941273859f8062353c0b8b64f09ba28354f556c7 | mipsel | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/afd71a8219e90a86deb922da64759f9c9bdb14fa | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/075ccac45aded28fd805d31626addb12d7f14d3e | ORPH armeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0fcb3e53553c84f544361502b20463339a3dc1e3 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/558dd625cf56a14758244b1939df577649addc23 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/d38d52501da858716fe98089d5965059e08ccfb3 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/5dbf9b7fd20b15ca984b24a0b64b3a1b69a2f97a | ORPH i686 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/c848d3130b49a03621a69b9c834a994913cc5c74 | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/cc0f81fb7b7d7c97b864f1931b3ea1529a308861 | ORPH mipsel | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/00d94124de3d1e91ee44de3b86c44263f1e7d3ba | sparc | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/602d67cf4fae4473a1ca1040d2bfef051618420a | ORPH powerpc64 | unknown | NOK | http://autobuild.buildroot.net/results/c84de89b6b90fcf64700ba6031f4a2f329b19f63 | i586 | wpewebkit | TIM | http://autobuild.buildroot.net/results/90223b33d3bf7a6fefd5a04674afdcb1e818045e | -- http://autobuild.buildroot.net From luca.ceresoli at bootlin.com Wed Oct 19 07:15:12 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Wed, 19 Oct 2022 09:15:12 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> References: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> Message-ID: <20221019091512.77a48aa8@booty> Hi Giulio, On Tue, 18 Oct 2022 15:15:06 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. A lot of this text would be useful in the help text below. The help text is visible in any moment in later releases, the commit log needs to be searched. > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti > --- > package/rtl8188eu/Config.in | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > index 76d9085297..8d68d104c8 100644 > --- a/package/rtl8188eu/Config.in > +++ b/package/rtl8188eu/Config.in > @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU > depends on BR2_LINUX_KERNEL > help > A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. For the above reasons, I'd add here: This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO I'd not add the todo list, as it will (hopefully) change in the future in the kernel and we don't want to keep updating our own copy. -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From peter at korsgaard.com Wed Oct 19 08:02:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:02:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/freerdp: security bump to version 2.8.1 In-Reply-To: <20221014220748.14254-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:07:48 +0200") References: <20221014220748.14254-1-fontaine.fabrice@gmail.com> Message-ID: <87wn8w5jho.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-39282 and CVE-2022-39283 > https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:02:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:02:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/dbus: security bump to version 1.12.24 In-Reply-To: <20221014222051.48942-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 15 Oct 2022 00:20:51 +0200") References: <20221014222051.48942-1-fontaine.fabrice@gmail.com> Message-ID: <87sfjk5jhi.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Denial of service fixes: > Evgeny Vereshchagin discovered several ways in which an authenticated > local attacker could cause a crash (denial of service) in > dbus-daemon --system or a custom DBusServer. In uncommon configurations > these could potentially be carried out by an authenticated remote > attacker. > ? An invalid array of fixed-length elements where the length of the > array is not a multiple of the length of the element would cause an > assertion failure in debug builds or an out-of-bounds read in > production builds. This was a regression in version 1.3.0. > (dbus#413, CVE-2022-42011; Simon McVittie) > ? A syntactically invalid type signature with incorrectly nested > parentheses and curly brackets would cause an assertion failure in > debug builds. Similar messages could potentially result in a crash or > incorrect message processing in a production build, although we are > not aware of a practical example. (dbus#418, CVE-2022-42010; > Simon McVittie) > ? A message in non-native endianness with out-of-band Unix file > descriptors would cause a use-after-free and possible memory > corruption in production builds, or an assertion failure in debug > builds. This was a regression in version 1.3.0. (dbus#417, > CVE-2022-42012; Simon McVittie) > https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:03:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:03:00 +0200 Subject: [Buildroot] [PATCH v2] configs/sipeed_*_sdcard: Add dependency on host-openssl In-Reply-To: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> (Damien Le Moal via buildroot's message of "Thu, 13 Oct 2022 16:56:46 +0900") References: <20221013075646.505807-1-damien.lemoal@opensource.wdc.com> Message-ID: <87o7u85jgr.fsf@dell.be.48ers.dk> >>>>> "Damien" == Damien Le Moal via buildroot writes: > Gitlab CI reported build failures for the sipeed RISC-V nommu boards > with the u-boot/sdcard enabled default configuration. The compilation > errors are related to the openssl/evp.h header file missing, e.g.: > In file included from tools/imagetool.h:24, > from tools/fit_common.c:20: > include/image.h:1166:12: fatal error: openssl/evp.h: No such file or > directory > 1166 | # include > | ^~~~~~~~~~~~~~~ > Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config > files so that host-openssl gets built as a dependency of U-Boot. > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 > Suggested-by: Thomas Petazzoni > Signed-off-by: Damien Le Moal Committed to 2022.08.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 19 08:01:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:01:01 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/dbus: security bump to version 1.12.24 Message-ID: <20221019080332.0C21186EDF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b1a75fac5ee41c4cded27e71b2e05d197df871dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 29586aed965844ffb35b4d859e02f6973a67f33c) Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index a3a21c1bcc..b3a79c431d 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -6,7 +6,7 @@ # When updating dbus, check if there are changes in session.conf and # system.conf, and update the versions in the dbus-broker package accordingly. -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From peter at korsgaard.com Wed Oct 19 07:58:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:58:32 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] package/freerdp: security bump to version 2.8.1 Message-ID: <20221019080332.01E4E86EDE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=062ab53211eb8ff43d7ae4b6621625fb6834b689 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 1e37cfd2dcc867e71519439e3cd9c630866b6140) Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 08:01:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:01:40 +0200 Subject: [Buildroot] [git commit branch/2022.08.x] configs/sipeed_*_sdcard: Add dependency on host-openssl Message-ID: <20221019080332.15C6986EE1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b44e2cf19a1f8f19e228019f320921fd06834f01 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Gitlab CI reported build failures for the sipeed RISC-V nommu boards with the u-boot/sdcard enabled default configuration. The compilation errors are related to the openssl/evp.h header file missing, e.g.: In file included from tools/imagetool.h:24, from tools/fit_common.c:20: include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory 1166 | # include | ^~~~~~~~~~~~~~~ Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config files so that host-openssl gets built as a dependency of U-Boot. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998 Suggested-by: Thomas Petazzoni Signed-off-by: Damien Le Moal Signed-off-by: Peter Korsgaard (cherry picked from commit 959e9f7fdef4d8b602740312649016245209ce73) Signed-off-by: Peter Korsgaard --- configs/sipeed_maix_bit_sdcard_defconfig | 1 + configs/sipeed_maix_dock_sdcard_defconfig | 1 + configs/sipeed_maix_go_sdcard_defconfig | 1 + configs/sipeed_maixduino_sdcard_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/sipeed_maix_bit_sdcard_defconfig b/configs/sipeed_maix_bit_sdcard_defconfig index e1c9dc417e..456b40dfe4 100644 --- a/configs/sipeed_maix_bit_sdcard_defconfig +++ b/configs/sipeed_maix_bit_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_dock_sdcard_defconfig b/configs/sipeed_maix_dock_sdcard_defconfig index 6b7f8d9c68..66e72bdc50 100644 --- a/configs/sipeed_maix_dock_sdcard_defconfig +++ b/configs/sipeed_maix_dock_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maix_go_sdcard_defconfig b/configs/sipeed_maix_go_sdcard_defconfig index a127872cd8..a914f5f483 100644 --- a/configs/sipeed_maix_go_sdcard_defconfig +++ b/configs/sipeed_maix_go_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/sipeed_maixduino_sdcard_defconfig b/configs/sipeed_maixduino_sdcard_defconfig index baaa2bc7bb..b91588b336 100644 --- a/configs/sipeed_maixduino_sdcard_defconfig +++ b/configs/sipeed_maixduino_sdcard_defconfig @@ -47,6 +47,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/uboot.config" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sipeed_maix_bitm" BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_DOSFSTOOLS=y From robimarko at gmail.com Wed Oct 19 08:03:42 2022 From: robimarko at gmail.com (Robert Marko) Date: Wed, 19 Oct 2022 10:03:42 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: <20221002150443.159058-1-robimarko@gmail.com> References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Sun, 2 Oct 2022 at 17:04, Robert Marko wrote: > > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- > Changes in v2: > * Correct license > * Add host-pkgconf to DEPENDENCIES > * Add minimal required kernel config options Anything I can do to help get this reviewed? Regards, Robert > --- > package/Config.in | 1 + > package/mdio-tools/Config.in | 9 +++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 33 insertions(+) > create mode 100644 package/mdio-tools/Config.in > create mode 100644 package/mdio-tools/mdio-tools.hash > create mode 100644 package/mdio-tools/mdio-tools.mk > > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..ed41e8bdd4 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -536,6 +536,7 @@ endmenu > source "package/mbpfan/Config.in" > source "package/mdadm/Config.in" > source "package/mdevd/Config.in" > + source "package/mdio-tools/Config.in" > source "package/memtest86/Config.in" > source "package/memtester/Config.in" > source "package/memtool/Config.in" > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..feb1e825ac > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,9 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > + select BR2_PACKAGE_LIBMNL > + help > + Low-level debug tools for MDIO devices > diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash > new file mode 100644 > index 0000000000..0111165f27 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk > new file mode 100644 > index 0000000000..308a23824b > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,20 @@ > +################################################################################ > +# > +# mdio-tools > +# > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0 > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl > + > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) > +endef > + > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > From peter at korsgaard.com Wed Oct 19 07:59:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:59:20 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/freerdp: bump to version 2.8.0 Message-ID: <20221019080510.635CF86EEF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9dbeb7d0d9a70d30677ff49eb0b80f0cf19f7cec branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Drop fourth patch (already in version) https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni (cherry picked from commit a223802adb2c6d0aca45de78ce246421a270044e) Signed-off-by: Peter Korsgaard --- ...Fix-building-with-LibreSSL-2.7.0-or-newer.patch | 126 --------------------- package/freerdp/freerdp.hash | 4 +- package/freerdp/freerdp.mk | 2 +- 3 files changed, 3 insertions(+), 129 deletions(-) diff --git a/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch b/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch deleted file mode 100644 index 3edf1ff3b3..0000000000 --- a/package/freerdp/0004-Fix-building-with-LibreSSL-2.7.0-or-newer.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 55a5a0a14ecef81c8ece1fea4a5a6004aebfeaff Mon Sep 17 00:00:00 2001 -From: Adrian Perez de Castro -Date: Mon, 27 Jun 2022 11:45:44 +0200 -Subject: [PATCH] Fix building with LibreSSL 2.7.0 or newer - -With LibreSSL 2.7.0 (or newer versions) some more structs have made -opaque, which requires a few changes: - -- BIO_meth_new() and related functions are now defined by LibreSSL, the - versions from opensslcompat.{h,c} does not need to be used anymore. -- HMAC_CTX is now opaque, HMAC_CTX_new(), EVP_MD_CTX_new, and related - functions should be used instead in winpr's hash.c. - -Signed-off-by: Adrian Perez de Castro -[Upstream status: https://github.com/FreeRDP/FreeRDP/commit/436f212be3950917e4bb209aa5064e423f0dd882] ---- - libfreerdp/crypto/opensslcompat.c | 3 ++- - libfreerdp/crypto/opensslcompat.h | 3 ++- - winpr/libwinpr/crypto/hash.c | 21 ++++++++++++++------- - 3 files changed, 18 insertions(+), 9 deletions(-) - -diff --git a/libfreerdp/crypto/opensslcompat.c b/libfreerdp/crypto/opensslcompat.c -index 701902dc2..314d6b51f 100644 ---- a/libfreerdp/crypto/opensslcompat.c -+++ b/libfreerdp/crypto/opensslcompat.c -@@ -19,7 +19,8 @@ - - #include "opensslcompat.h" - --#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) -+#if OPENSSL_VERSION_NUMBER < 0x10100000L || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - BIO_METHOD* BIO_meth_new(int type, const char* name) - { -diff --git a/libfreerdp/crypto/opensslcompat.h b/libfreerdp/crypto/opensslcompat.h -index 169e8e4c2..3ad5b6bd4 100644 ---- a/libfreerdp/crypto/opensslcompat.h -+++ b/libfreerdp/crypto/opensslcompat.h -@@ -30,7 +30,8 @@ - - #include - --#if OPENSSL_VERSION_NUMBER < 0x10100000L || defined(LIBRESSL_VERSION_NUMBER) -+#if OPENSSL_VERSION_NUMBER < 0x10100000L || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - #include - #include -diff --git a/winpr/libwinpr/crypto/hash.c b/winpr/libwinpr/crypto/hash.c -index 8265b2e90..5e94039e7 100644 ---- a/winpr/libwinpr/crypto/hash.c -+++ b/winpr/libwinpr/crypto/hash.c -@@ -151,7 +151,8 @@ WINPR_HMAC_CTX* winpr_HMAC_New(void) - WINPR_HMAC_CTX* ctx = NULL; - #if defined(WITH_OPENSSL) - HMAC_CTX* hmac = NULL; --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - - if (!(hmac = (HMAC_CTX*)calloc(1, sizeof(HMAC_CTX)))) - return NULL; -@@ -185,7 +186,8 @@ BOOL winpr_HMAC_Init(WINPR_HMAC_CTX* ctx, WINPR_MD_TYPE md, const BYTE* key, siz - if (!evp || !hmac) - return FALSE; - --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Init_ex(hmac, key, keylen, evp, NULL); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -221,7 +223,8 @@ BOOL winpr_HMAC_Update(WINPR_HMAC_CTX* ctx, const BYTE* input, size_t ilen) - { - #if defined(WITH_OPENSSL) - HMAC_CTX* hmac = (HMAC_CTX*)ctx; --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Update(hmac, input, ilen); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -253,7 +256,8 @@ BOOL winpr_HMAC_Final(WINPR_HMAC_CTX* ctx, BYTE* output, size_t olen) - - #if defined(WITH_OPENSSL) - hmac = (HMAC_CTX*)ctx; --#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10000000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_Final(hmac, output, NULL); /* no return value on OpenSSL 0.9.x */ - return TRUE; - #else -@@ -279,7 +283,8 @@ void winpr_HMAC_Free(WINPR_HMAC_CTX* ctx) - - if (hmac) - { --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - HMAC_CTX_cleanup(hmac); - free(hmac); - #else -@@ -332,7 +337,8 @@ WINPR_DIGEST_CTX* winpr_Digest_New(void) - WINPR_DIGEST_CTX* ctx = NULL; - #if defined(WITH_OPENSSL) - EVP_MD_CTX* mdctx; --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - mdctx = EVP_MD_CTX_create(); - #else - mdctx = EVP_MD_CTX_new(); -@@ -464,7 +470,8 @@ void winpr_Digest_Free(WINPR_DIGEST_CTX* ctx) - - if (mdctx) - { --#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || defined(LIBRESSL_VERSION_NUMBER) -+#if (OPENSSL_VERSION_NUMBER < 0x10100000L) || \ -+ (defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL) - EVP_MD_CTX_destroy(mdctx); - #else - EVP_MD_CTX_free(mdctx); --- -2.36.1 - diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index 2b7aa25999..a600a96172 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.7.0.tar.gz.sha256 -sha256 89000728b6e66ac37db018d6dc5f0981b530fd550ab748877ff42892dd0c166b freerdp-2.7.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 +sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index f4636724d3..c7e01fa541 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.7.0 +FREERDP_VERSION = 2.8.0 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 07:59:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 09:59:27 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/freerdp: security bump to version 2.8.1 Message-ID: <20221019080510.6E46686EF1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3f796a6864a265ed6c90245576c5b2a419022d10 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fix CVE-2022-39282 and CVE-2022-39283 https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 1e37cfd2dcc867e71519439e3cd9c630866b6140) Signed-off-by: Peter Korsgaard --- package/freerdp/freerdp.hash | 4 ++-- package/freerdp/freerdp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/freerdp/freerdp.hash b/package/freerdp/freerdp.hash index a600a96172..94d0746d40 100644 --- a/package/freerdp/freerdp.hash +++ b/package/freerdp/freerdp.hash @@ -1,5 +1,5 @@ -# From https://pub.freerdp.com/releases/freerdp-2.8.0.tar.gz.sha256 -sha256 fd26a41c367ea1f23a06716725d19efa41fd572c4536348d39b3465b116b3703 freerdp-2.8.0.tar.gz +# From https://pub.freerdp.com/releases/freerdp-2.8.1.tar.gz.sha256 +sha256 ea8903b29914134202a972c06052432678c89cb5eebcc8f5a41553030c97376b freerdp-2.8.1.tar.gz # Locally calculated sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/freerdp/freerdp.mk b/package/freerdp/freerdp.mk index c7e01fa541..ae844c589e 100644 --- a/package/freerdp/freerdp.mk +++ b/package/freerdp/freerdp.mk @@ -4,7 +4,7 @@ # ################################################################################ -FREERDP_VERSION = 2.8.0 +FREERDP_VERSION = 2.8.1 FREERDP_SITE = https://pub.freerdp.com/releases FREERDP_DEPENDENCIES = libglib2 openssl zlib FREERDP_LICENSE = Apache-2.0 From peter at korsgaard.com Wed Oct 19 08:00:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 19 Oct 2022 10:00:35 +0200 Subject: [Buildroot] [git commit branch/2022.02.x] package/dbus: security bump to version 1.12.24 Message-ID: <20221019080510.7CD0086EF2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c4521ae2f11ef8283f160357ce9bd4dbe8a9292 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. ??? An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) ??? A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) ??? A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie) https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit 29586aed965844ffb35b4d859e02f6973a67f33c) Signed-off-by: Peter Korsgaard --- package/dbus/dbus.hash | 4 ++-- package/dbus/dbus.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/dbus/dbus.hash b/package/dbus/dbus.hash index 176396fe2f..17c70004ba 100644 --- a/package/dbus/dbus.hash +++ b/package/dbus/dbus.hash @@ -1,7 +1,7 @@ # Locally calculated after checking pgp signature -# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.22.tar.gz.asc +# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.24.tar.gz.asc # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F -sha256 8d25785c798ec4f892e6f9d177fb0ceeb8b29867b119798f9d5228561d3ad474 dbus-1.12.22.tar.gz +sha256 bc42d196c1756ac520d61bf3ccd6f42013617def45dd1e591a6091abf51dca38 dbus-1.12.24.tar.gz # Locally calculated sha256 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1 COPYING diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index de447d8680..9b008394b9 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -4,7 +4,7 @@ # ################################################################################ -DBUS_VERSION = 1.12.22 +DBUS_VERSION = 1.12.24 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools) DBUS_LICENSE_FILES = COPYING From stefan at agner.ch Wed Oct 19 08:44:43 2022 From: stefan at agner.ch (Stefan Agner) Date: Wed, 19 Oct 2022 10:44:43 +0200 Subject: [Buildroot] [PATCH] package/openvmtools: fix local privilege escalation vulnerability Message-ID: Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner --- ...uthorization-on-incoming-guestOps-re.patch | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..cae2e82f08 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,36 @@ +From 4f5cfc23dd3357bafc8b699dd5c558f000a534c3 Mon Sep 17 00:00:00 2001 +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. +--- + open-vm-tools/vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/open-vm-tools/vgauth/serviceImpl/proto.c b/open-vm-tools/vgauth/serviceImpl/proto.c +index dc1dfd7..9e04991 100644 +--- a/open-vm-tools/vgauth/serviceImpl/proto.c ++++ b/open-vm-tools/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.6.2 + -- 2.38.0 From stefan at agner.ch Wed Oct 19 08:56:16 2022 From: stefan at agner.ch (Stefan Agner) Date: Wed, 19 Oct 2022 10:56:16 +0200 Subject: [Buildroot] [PATCH v2] package/openvmtools: fix local privilege escalation vulnerability Message-ID: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner --- v2: Actually make the patch apply ...uthorization-on-incoming-guestOps-re.patch | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..b2c8995c53 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,37 @@ +From bb9f9ffbb151397545f921cee5b6a4933c6eea80 Mon Sep 17 00:00:00 2001 +Message-Id: +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. +--- + vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/vgauth/serviceImpl/proto.c b/vgauth/serviceImpl/proto.c +index db7159ee..c4f85b02 100644 +--- a/vgauth/serviceImpl/proto.c ++++ b/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019-2021 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.38.0 + -- 2.38.0 From angelo at amarulasolutions.com Wed Oct 19 09:03:09 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 11:03:09 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package Message-ID: <20221019090309.1410432-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- V2: * Adding me to DEVELOPERS DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..9eb5400999 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..56af3d426b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 locally computed +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..e4e93b4c31 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From moritz at h6t.eu Wed Oct 19 08:53:53 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Wed, 19 Oct 2022 10:53:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds Message-ID: <20221019085353.8864-1-moritz@h6t.eu> From: Moritz Bitsch * when not supplying --release to cargo various optimizations get disabled, resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG * Debug symbol generation can be controlled with the RUSTFLAGS variable: add -g to RUSTFLAGS for debug symbols Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..7ce7867f67 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ # and should be removed when fixed upstream # ifeq ($(NORMALIZED_ARCH),arm) - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition endif +ifeq ($(BR2_ENABLE_DEBUG),y) + PKG_CARGO_RUSTFLAGS += -g +endif + +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) + HOST_PKG_CARGO_ENV = \ $(PKG_COMMON_CARGO_ENV) @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS $$($(2)_CARGO_ENV) \ cargo build \ --offline \ - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ --manifest-path Cargo.toml \ --locked \ $$($(2)_CARGO_BUILD_OPTS) -- 2.37.3 From d.lang at abatec.at Wed Oct 19 09:14:20 2022 From: d.lang at abatec.at (Lang Daniel) Date: Wed, 19 Oct 2022 09:14:20 +0000 Subject: [Buildroot] [PATCH 1/1] package/paho-mqtt-c: bump to version 1.3.11 Message-ID: Service release. Issues resolved: https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 Signed-off-by: Daniel Lang --- package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/paho-mqtt-c/paho-mqtt-c.hash b/package/paho-mqtt-c/paho-mqtt-c.hash index 931bf5b9c8..1949abdf1a 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.hash +++ b/package/paho-mqtt-c/paho-mqtt-c.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c70db96e66adacae411d5d875fbb08bca6ff9945de3d215b3af93cbd22792db5 paho-mqtt-c-1.3.10.tar.gz +sha256 d7bba3f8b8978802e11e2b1f28e96e6b7f4ed5d8a268af52a4d3b1bcbd1db16b paho-mqtt-c-1.3.11.tar.gz sha256 83bbba033dc985487e321b6dfde111772affb73460be48726299fed3da684b1c edl-v10 sha256 0becf16567beb77fa252b7664631dd177c8f9a1889e48995b45379c7130e5303 epl-v20 sha256 bc0f3f447097eb82a29ad6c2f4929572bb548b6bd4c9e38fde1bf131a771b7a0 LICENSE diff --git a/package/paho-mqtt-c/paho-mqtt-c.mk b/package/paho-mqtt-c/paho-mqtt-c.mk index 1b6fc5785c..30daf863ad 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.mk +++ b/package/paho-mqtt-c/paho-mqtt-c.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHO_MQTT_C_VERSION = 1.3.10 +PAHO_MQTT_C_VERSION = 1.3.11 PAHO_MQTT_C_SITE = $(call github,eclipse,paho.mqtt.c,v$(PAHO_MQTT_C_VERSION)) PAHO_MQTT_C_LICENSE = EPL-2.0 or BSD-3-Clause PAHO_MQTT_C_LICENSE_FILES = epl-v20 edl-v10 LICENSE -- 2.25.1 From dumasv.dev at gmail.com Wed Oct 19 12:40:16 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Wed, 19 Oct 2022 14:40:16 +0200 Subject: [Buildroot] [PATCH v3] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221019124017.427199-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From marcus.hoffmann at othermo.de Wed Oct 19 12:56:50 2022 From: marcus.hoffmann at othermo.de (Marcus Hoffmann) Date: Wed, 19 Oct 2022 14:56:50 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package In-Reply-To: <20221019090309.1410432-1-angelo@amarulasolutions.com> References: <20221019090309.1410432-1-angelo@amarulasolutions.com> Message-ID: <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> Thanks, I've been meaning to submit this as well but didn't get around to it yet. On 19.10.22 11:03, Angelo Compagnucci wrote: > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > Signed-off-by: Angelo Compagnucci One somewhat general question below, but otherwise this looks all good. Reviewed-by: Marcus Hoffmann > --- > V2: > * Adding me to DEVELOPERS > > DEVELOPERS | 1 + > package/Config.in | 1 + > package/python-minimalmodbus/Config.in | 7 +++++++ > .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ > .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ > 5 files changed, 27 insertions(+) > create mode 100644 package/python-minimalmodbus/Config.in > create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash > create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..9eb5400999 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ > F: package/monolite/ > F: package/openjpeg/ > F: package/python-can/ > +F: package/python-minimalmodbus/ > F: package/python-pillow/ > F: package/python-pydal/ > F: package/python-spidev/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..08574931f8 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1112,6 +1112,7 @@ menu "External python modules" > source "package/python-mbstrdecoder/Config.in" > source "package/python-memory-profiler/Config.in" > source "package/python-mimeparse/Config.in" > + source "package/python-minimalmodbus/Config.in" > source "package/python-mistune/Config.in" > source "package/python-modbus-tk/Config.in" > source "package/python-more-itertools/Config.in" > diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in > new file mode 100644 > index 0000000000..fd0f33e0d4 > --- /dev/null > +++ b/package/python-minimalmodbus/Config.in > @@ -0,0 +1,7 @@ > +config BR2_PACKAGE_PYTHON_MINIMALMODBUS > + bool "python-minimalmodbus" > + select BR2_PACKAGE_PYTHON_SERIAL # runtime > + help > + Easy-to-use Modbus RTU and Modbus ASCII implementation. > + > + https://minimalmodbus.readthedocs.io/ > diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash > new file mode 100644 > index 0000000000..56af3d426b > --- /dev/null > +++ b/package/python-minimalmodbus/python-minimalmodbus.hash > @@ -0,0 +1,4 @@ > +# sha256 locally computed > +sha256 aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 minimalmodbus-2.0.1.tar.gz > +# Hash for license file > +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE > diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk > new file mode 100644 > index 0000000000..e4e93b4c31 > --- /dev/null > +++ b/package/python-minimalmodbus/python-minimalmodbus.mk > @@ -0,0 +1,14 @@ > +################################################################################ > +# > +# python-minimalmodbus > +# > +################################################################################ > + > +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 > +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz > +PYTHON_MINIMALMODBUS_SITE = $(call github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) I used ./utils/scanpypi and thus have https://files.pythonhosted.org as a site. Does buildroot have any preference for which upstream version of python packages to prefer if both work? > +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 > +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE > + > +$(eval $(python-package)) Best, Marcus From angelo at amarulasolutions.com Wed Oct 19 13:27:13 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:27:13 +0200 Subject: [Buildroot] [PATCH v2] package/python-minimalmodbus: new package In-Reply-To: <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> References: <20221019090309.1410432-1-angelo@amarulasolutions.com> <83402c3a-a873-7b1d-5f21-519c8d97ec35@othermo.de> Message-ID: On Wed, Oct 19, 2022 at 2:56 PM Marcus Hoffmann wrote: > Thanks, > > I've been meaning to submit this as well but didn't get around to it yet. > > On 19.10.22 11:03, Angelo Compagnucci wrote: > > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > > > Signed-off-by: Angelo Compagnucci > > One somewhat general question below, but otherwise this looks all good. > > Reviewed-by: Marcus Hoffmann > > > --- > > V2: > > * Adding me to DEVELOPERS > > > > DEVELOPERS | 1 + > > package/Config.in | 1 + > > package/python-minimalmodbus/Config.in | 7 +++++++ > > .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ > > .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ > > 5 files changed, 27 insertions(+) > > create mode 100644 package/python-minimalmodbus/Config.in > > create mode 100644 > package/python-minimalmodbus/python-minimalmodbus.hash > > create mode 100644 package/python-minimalmodbus/ > python-minimalmodbus.mk > > > > diff --git a/DEVELOPERS b/DEVELOPERS > > index c0e6f8bbef..9eb5400999 100644 > > --- a/DEVELOPERS > > +++ b/DEVELOPERS > > @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ > > F: package/monolite/ > > F: package/openjpeg/ > > F: package/python-can/ > > +F: package/python-minimalmodbus/ > > F: package/python-pillow/ > > F: package/python-pydal/ > > F: package/python-spidev/ > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..08574931f8 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -1112,6 +1112,7 @@ menu "External python modules" > > source "package/python-mbstrdecoder/Config.in" > > source "package/python-memory-profiler/Config.in" > > source "package/python-mimeparse/Config.in" > > + source "package/python-minimalmodbus/Config.in" > > source "package/python-mistune/Config.in" > > source "package/python-modbus-tk/Config.in" > > source "package/python-more-itertools/Config.in" > > diff --git a/package/python-minimalmodbus/Config.in > b/package/python-minimalmodbus/Config.in > > new file mode 100644 > > index 0000000000..fd0f33e0d4 > > --- /dev/null > > +++ b/package/python-minimalmodbus/Config.in > > @@ -0,0 +1,7 @@ > > +config BR2_PACKAGE_PYTHON_MINIMALMODBUS > > + bool "python-minimalmodbus" > > + select BR2_PACKAGE_PYTHON_SERIAL # runtime > > + help > > + Easy-to-use Modbus RTU and Modbus ASCII implementation. > > + > > + https://minimalmodbus.readthedocs.io/ > > diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash > b/package/python-minimalmodbus/python-minimalmodbus.hash > > new file mode 100644 > > index 0000000000..56af3d426b > > --- /dev/null > > +++ b/package/python-minimalmodbus/python-minimalmodbus.hash > > @@ -0,0 +1,4 @@ > > +# sha256 locally computed > > +sha256 > aa7e3989074d4efba0013c3c50263aec01afae368bd5bd234008b50aea1b7ab4 > minimalmodbus-2.0.1.tar.gz > > +# Hash for license file > > +sha256 > abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE > > diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk > b/package/python-minimalmodbus/python-minimalmodbus.mk > > new file mode 100644 > > index 0000000000..e4e93b4c31 > > --- /dev/null > > +++ b/package/python-minimalmodbus/python-minimalmodbus.mk > > @@ -0,0 +1,14 @@ > > > +################################################################################ > > +# > > +# python-minimalmodbus > > +# > > > +################################################################################ > > + > > +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 > > +PYTHON_MINIMALMODBUS_SOURCE = > minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz > > +PYTHON_MINIMALMODBUS_SITE = $(call > github,pyhys,minimalmodbus,$(PYTHON_MINIMALMODBUS_VERSION)) > > I used ./utils/scanpypi and thus have https://files.pythonhosted.org as > a site. Does buildroot have any preference for which upstream version of > python packages to prefer if both work? > I don't know, honestly. I was using it from git, and it appeared natural to me to submit that way. Anyway, it is probably better to have it from pypi. Let me spin around another revision. > > +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools > > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 > > +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE > > + > +$(eval $(python-package)) > > Best, > Marcus > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 13:35:11 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:35:11 +0200 Subject: [Buildroot] [PATCH v3] package/python-minimalmodbus: new package Message-ID: <20221019133511.1717939-1-angelo@amarulasolutions.com> Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci --- V2: * Adding me to DEVELOPERS V3: * Move to pypi (Marcus Hoffmann) DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ .../python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ .../python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) create mode 100644 package/python-minimalmodbus/Config.in create mode 100644 package/python-minimalmodbus/python-minimalmodbus.hash create mode 100644 package/python-minimalmodbus/python-minimalmodbus.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..9eb5400999 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..08574931f8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1112,6 +1112,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..b29e83773b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 from https://pypi.org/project/minimalmodbus +sha256 cf873a2530be3f4b86467c3e4d47b5f69fd345d47451baca4adbf59e2ac36d00 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..434323ccf8 --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = https://files.pythonhosted.org/packages/78/99/8cd22b4465e697bae2b02fd06aaccd4c5cdfbb18945d728db99f23d71df9 +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) -- 2.25.1 From angelo at amarulasolutions.com Wed Oct 19 13:42:21 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 15:42:21 +0200 Subject: [Buildroot] [PATCH v3] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: Hi Victor, On Wed, Oct 19, 2022 at 2:40 PM Victor Dumas wrote: > Using "xargs" instead of "while read" loop allows for the patching of > files to be parallelized, significantly reducing the amount of time it > takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 > minutes, it now only takes about 30s on a 12 core machine > I think you should split the commit message, it looks to me single really long line. > > Signed-off-by: Victor Dumas > --- > support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- > 1 file changed, 38 insertions(+), 28 deletions(-) > > diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath > index 3e67e770e5..7ed1851aac 100755 > --- a/support/scripts/fix-rpath > +++ b/support/scripts/fix-rpath > @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" > STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" > TARGET_EXCLUDEPATHS="/lib/firmware" > > +patch_file() { > + PATCHELF="${1}" > + rootdir="${2}" > + sanitize_extra_args="${3}" > + file="${4}" > + > + # check if it's an ELF file > + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > + if test $? -ne 0 ; then > + return 0 > + fi > + > + # make files writable if necessary > + changed=$(chmod -c u+w "${file}") > + > + # With per-package directory support, most RPATH of host > + # binaries will point to per-package directories. This won't > + # work with the --make-rpath-relative ${rootdir} invocation as > + # the per-package host directory is not within ${rootdir}. So, > + # we rewrite all RPATHs pointing to per-package directories so > + # that they point to the global host directry. > + changed_rpath=$(echo ${rpath} | sed "s@ > ${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > + if test "${rpath}" != "${changed_rpath}" ; then > + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > + fi > + > + # call patchelf to sanitize the rpath > + ${PATCHELF} --make-rpath-relative "${rootdir}" > ${sanitize_extra_args[@]} "${file}" > + # restore the original permission > + test "${changed}" != "" && chmod u-w "${file}" > +} > + > main() { > local rootdir > local tree="${1}" > @@ -123,34 +157,10 @@ main() { > ;; > esac > > - find_args+=( "-type" "f" "-print" ) > - > - while read file ; do > - # check if it's an ELF file > - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) > - if test $? -ne 0 ; then > - continue > - fi > - > - # make files writable if necessary > - changed=$(chmod -c u+w "${file}") > - > - # With per-package directory support, most RPATH of host > - # binaries will point to per-package directories. This won't > - # work with the --make-rpath-relative ${rootdir} invocation as > - # the per-package host directory is not within ${rootdir}. So, > - # we rewrite all RPATHs pointing to per-package directories so > - # that they point to the global host directry. > - changed_rpath=$(echo ${rpath} | sed "s@ > ${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") > - if test "${rpath}" != "${changed_rpath}" ; then > - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" > - fi > - > - # call patchelf to sanitize the rpath > - ${PATCHELF} --make-rpath-relative "${rootdir}" > ${sanitize_extra_args[@]} "${file}" > - # restore the original permission > - test "${changed}" != "" && chmod u-w "${file}" > - done < <(find "${rootdir}" ${find_args[@]}) > + find_args+=( "-type" "f" "-print0" ) > + > + export -f patch_file > + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P $(nproc) -I {} > bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" > _ {} > I'm seeing here you capped the xargs with nproc, but that couldn't be always the optimal solution. On lesser powerful machines, that could suck all the core for a very long time (experimenting here on my machine ;) ) . Probably you should cap to nproc-2 for example or look for the BR2_JLEVEL or something similar. _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From giulio.benetti at benettiengineering.com Wed Oct 19 13:48:23 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 15:48:23 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in Message-ID: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> This rtl8188eu driver is not the same as the one in mainline Linux that still has pending work to be done that in this driver is done, check: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO specifically: * Switch to use LIB80211. * Switch to use MAC80211. * Switch to use CFG80211. So let's remove the description that is not valid anymore. Suggested-by: Luca Ceresoli Signed-off-by: Giulio Benetti --- V1->V2: * improve Config.in description as pointed by Luca Ceresoli --- package/rtl8188eu/Config.in | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in index 76d9085297..2fab1fd5c0 100644 --- a/package/rtl8188eu/Config.in +++ b/package/rtl8188eu/Config.in @@ -4,9 +4,10 @@ config BR2_PACKAGE_RTL8188EU depends on BR2_LINUX_KERNEL help A standalone driver for the RTL8188EU USB Wi-Fi adapter. - This is needed only for Linux kernels before 3.12. - Since 3.12, there is a (staging) driver in mainline, with a - similar codebase. + This rtl8188eu driver is not the same as the one in mainline + Linux that still has pending work to be done that in this + driver is done, check: + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO Make sure your target kernel has the CONFIG_WIRELESS_EXT config option enabled. -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 19 13:49:20 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 15:49:20 +0200 Subject: [Buildroot] [PATCH] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019091512.77a48aa8@booty> References: <20221018131506.123350-1-giulio.benetti@benettiengineering.com> <20221019091512.77a48aa8@booty> Message-ID: Hi Luca, On 19/10/22 09:15, Luca Ceresoli via buildroot wrote: > Hi Giulio, > > On Tue, 18 Oct 2022 15:15:06 +0200 > Giulio Benetti wrote: > >> This rtl8188eu driver is not the same as the one in mainline Linux that >> still has pending work to be done that in this driver is done, check: >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO >> specifically: >> * Switch to use LIB80211. >> * Switch to use MAC80211. >> * Switch to use CFG80211. >> So let's remove the description that is not valid anymore. > > A lot of this text would be useful in the help text below. The help > text is visible in any moment in later releases, the commit log needs > to be searched. > >> Suggested-by: Luca Ceresoli >> Signed-off-by: Giulio Benetti >> --- >> package/rtl8188eu/Config.in | 3 --- >> 1 file changed, 3 deletions(-) >> >> diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in >> index 76d9085297..8d68d104c8 100644 >> --- a/package/rtl8188eu/Config.in >> +++ b/package/rtl8188eu/Config.in >> @@ -4,9 +4,6 @@ config BR2_PACKAGE_RTL8188EU >> depends on BR2_LINUX_KERNEL >> help >> A standalone driver for the RTL8188EU USB Wi-Fi adapter. >> - This is needed only for Linux kernels before 3.12. >> - Since 3.12, there is a (staging) driver in mainline, with a >> - similar codebase. > > For the above reasons, I'd add here: > > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > > I'd not add the todo list, as it will (hopefully) change in the future > in the kernel and we don't want to keep updating our own copy. Good idea. Thank you for taking care. I've just sent v2 patch: https://patchwork.ozlabs.org/project/buildroot/patch/20221019134823.12594-1-giulio.benetti at benettiengineering.com/ Kind regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas From gwenj at trabucayre.com Wed Oct 19 13:43:28 2022 From: gwenj at trabucayre.com (Gwenhael Goavec-Merou) Date: Wed, 19 Oct 2022 15:43:28 +0200 Subject: [Buildroot] [PATCH v5] package/gnuradio: bump version to 3.10.4.0 Message-ID: <1666187008-64454-1-git-send-email-gwenj@trabucayre.com> From: Gwenhael Goavec-Merou - remove all no more required patches - backport 2 patches to fix failures induces by missing headers - add dependency to SPDLOG - add pybind dependency where python is set Note: - Since gnuradio 3.10 swig was replaced by pybind. Now python libraries, bindings and python wrappers are produces using pybind: this why python-pybind is a buildtime dependency. As mentionned in [1], this one is a stagging only package: headers must be into staging directory, so it can't be host and at the same time since this package provides only headers and .cmake files nothing has to be installed into the target directory. A select is required because it's not an host package and GNURADIO_DEPENDENCIES is updated with python-pybind to have pybind present before gnuradio's build. - host-python-numpy is now required since some cpp bindings uses numpy's functions directly. python-numpy (target package) is left required because python blocks and wrappers needs this library at runtime. [1] http://lists.busybox.net/pipermail/buildroot/2022-October/653030.html Signed-off-by: Gwenhael Goavec-Merou --- Changes v4 -> v5: - re-add python-pybind select Changes v3 -> v4: - re-add runtime comment for numpy - remove python-pybind select - rework commit message Changes v2 -> v3: - update gnuradio version 3.10.3.0 -> 3.10.4.0 - remove patch to fix libfmt9 (now applied) - backport two patch to fix failures due to missing header - explain in commit message why pybind and numpy are now required at buildtime (Thomas) Changes v1 -> v2: - remove #runtime comment for PYTHON_NUMPY and PYTHON_PYBIND (Thomas) - remove host-python-mako to the dependencies list (now useless) (Thomas) - backport patch to fix build failure with libfmt > 9 --- ...g-missing-vector-in-blockinterleaver.patch | 42 + ....h-drop-boost-cstdint.hpp-and-use-cs.patch | 39 - ...rleaving.h-add-missing-cstddef-heade.patch | 33 + ...aceholders_with_their_full_namespace.patch | 1012 ----------------- ...rdcode-INTERFACE_INCLUDE_DIRECTORIES.patch | 57 - ...add-examples-c-subdirectory-when-gr-.patch | 55 - ...ve-deprecated-math-common_factor.hpp.patch | 165 --- package/gnuradio/Config.in | 5 +- package/gnuradio/gnuradio.hash | 2 +- package/gnuradio/gnuradio.mk | 12 +- 10 files changed, 84 insertions(+), 1338 deletions(-) create mode 100644 package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch delete mode 100644 package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch create mode 100644 package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch delete mode 100644 package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch delete mode 100644 package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch delete mode 100644 package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch delete mode 100644 package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch diff --git a/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch new file mode 100644 index 0000000000..f805e300af --- /dev/null +++ b/package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch @@ -0,0 +1,42 @@ +From 45fe4ac55ad88b6793d225e676205c30388ec138 Mon Sep 17 00:00:00 2001 +From: Ryan Volz +Date: Fri, 16 Sep 2022 21:05:51 -0400 +Subject: [PATCH 1/2] blocks: Including missing in blockinterleaver. + +Signed-off-by: Ryan Volz +[Retrieved (and backported) from: +https://github.com/gnuradio/gnuradio/commit/463c3477549b26b32d9b73eef30044e97c4eee64] +Signed-off-by: Gwenhael Goavec-Merou +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 2 +- + gr-blocks/lib/blockinterleaving.cc | 1 + + 2 files changed, 2 insertions(+), 1 deletion(-) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index 9d4e0f249..df831fe5a 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -12,7 +12,7 @@ + #define INCLUDED_GR_BLOCKS_BLOCKINTERLEAVING_H + + #include +- ++#include + + namespace gr { + namespace blocks { +diff --git a/gr-blocks/lib/blockinterleaving.cc b/gr-blocks/lib/blockinterleaving.cc +index fc5873e11..768ad9ea7 100644 +--- a/gr-blocks/lib/blockinterleaving.cc ++++ b/gr-blocks/lib/blockinterleaving.cc +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch b/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch deleted file mode 100644 index 532bebcf2e..0000000000 --- a/package/gnuradio/0001-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f643bc12100c67288adda3699a9e61d6a66fb529 Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Fri, 7 Feb 2020 16:49:30 +0100 -Subject: [PATCH] gr-digital:glfsr.h: drop boost/cstdint.hpp and use cstdint - -gr-digital/glfsr.h include boost/cstdint.hpp to have uintxx_t. -These types are in boost namespace but nor using namespace xxx, nor boost:: are used. -The result is : -In file included from /home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/glfsr.cc:23: -/home/buildroot/autobuild/instance-0/output-1/build/gnuradio-3.8.0.0/gr-digital/lib/../include/gnuradio/digital/glfsr.h:42:5: error: 'uint32_t' does not name a type; did you mean 'u_int32_t'? -uint32_t d_shift_register; -^~~~~~~~ -u_int32_t - -Since Gnuradio policy is Less boost == better and C++11 is used, use cstdint -instead of boost/cstdint.hpp. - -[backported from 475e4a156b516c089175afb998acdc80b740b437] -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-digital/include/gnuradio/digital/glfsr.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gr-digital/include/gnuradio/digital/glfsr.h b/gr-digital/include/gnuradio/digital/glfsr.h -index 0b5141f1f..1003bcd01 100644 ---- a/gr-digital/include/gnuradio/digital/glfsr.h -+++ b/gr-digital/include/gnuradio/digital/glfsr.h -@@ -24,7 +24,7 @@ - #define INCLUDED_DIGITAL_GLFSR_H - - #include --#include -+#include - - namespace gr { - namespace digital { --- -2.24.1 - diff --git a/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch new file mode 100644 index 0000000000..d551793be5 --- /dev/null +++ b/package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch @@ -0,0 +1,33 @@ +From 901c2ad1ac88908a2e6db5615d5af39a218d826d Mon Sep 17 00:00:00 2001 +From: Gwenhael Goavec-Merou +Date: Fri, 23 Sep 2022 08:41:26 +0200 +Subject: [PATCH 2/2] blocks/blockinterleaving.h: add missing cstddef header + (required for size_t) + +Fix build failure like: + +gnuradio/gr-blocks/lib/../include/gnuradio/blocks/blockinterleaving.h:25:36: error: ???size_t??? was not declared in this scope + +This failure is due to the miss of cstddef include + +Signed-off-by: Gwenhael Goavec-Merou +[Upstream status: https://github.com/gnuradio/gnuradio/pull/6188] +--- + gr-blocks/include/gnuradio/blocks/blockinterleaving.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +index df831fe5a..33c59e35b 100644 +--- a/gr-blocks/include/gnuradio/blocks/blockinterleaving.h ++++ b/gr-blocks/include/gnuradio/blocks/blockinterleaving.h +@@ -13,6 +13,7 @@ + + #include + #include ++#include + + namespace gr { + namespace blocks { +-- +2.35.1 + diff --git a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch b/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch deleted file mode 100644 index 431cc12522..0000000000 --- a/package/gnuradio/0002-boost_qualify_placeholders_with_their_full_namespace.patch +++ /dev/null @@ -1,1012 +0,0 @@ -From 5d4c317a372c77aa70df6ab3403d161cd41a7d17 Mon Sep 17 00:00:00 2001 -From: ponce -Date: Sun, 17 May 2020 14:02:57 +0200 -Subject: [PATCH] boost: qualify placeholders with their full namespace. - -This is needed with boost >= 1.73.0. - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3566] - -Signed-off-by: ponce -Signed-off-by: Gwenhael Goavec-Merou ---- - .../(exported from wiki) Message Passing.txt | 8 +++--- - gnuradio-runtime/lib/block.cc | 3 ++- - gr-blocks/lib/copy_impl.cc | 4 ++- - gr-blocks/lib/message_debug_impl.cc | 13 +++++++--- - gr-blocks/lib/message_strobe_impl.cc | 5 ++-- - gr-blocks/lib/message_strobe_random_impl.cc | 5 ++-- - gr-blocks/lib/multiply_matrix_impl.cc | 11 +++++--- - gr-blocks/lib/mute_impl.cc | 5 ++-- - gr-blocks/lib/nop_impl.cc | 5 ++-- - gr-blocks/lib/pdu_filter_impl.cc | 5 ++-- - gr-blocks/lib/pdu_remove_impl.cc | 5 ++-- - gr-blocks/lib/pdu_set_impl.cc | 4 ++- - gr-blocks/lib/random_pdu_impl.cc | 5 ++-- - gr-blocks/lib/repeat_impl.cc | 5 ++-- - gr-blocks/lib/socket_pdu_impl.cc | 18 ++++++++----- - .../lib/tagged_stream_multiply_length_impl.cc | 7 +++--- - gr-blocks/lib/tuntap_pdu_impl.cc | 3 ++- - gr-digital/lib/chunks_to_symbols_impl.cc | 5 ++-- - .../lib/constellation_receiver_cb_impl.cc | 14 ++++++----- - gr-digital/lib/costas_loop_cc_impl.cc | 4 ++- - gr-digital/lib/crc32_async_bb_impl.cc | 8 ++++-- - gr-digital/lib/header_payload_demux_impl.cc | 7 +++--- - .../lib/protocol_formatter_async_impl.cc | 4 ++- - gr-fec/lib/async_decoder_impl.cc | 8 ++++-- - gr-fec/lib/async_encoder_impl.cc | 8 ++++-- - gr-fec/lib/depuncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_bb_impl.cc | 4 ++- - gr-fec/lib/puncture_ff_impl.cc | 4 ++- - gr-filter/lib/freq_xlating_fir_filter_impl.cc | 2 +- - gr-filter/lib/mmse_resampler_cc_impl.cc | 5 ++-- - gr-filter/lib/mmse_resampler_ff_impl.cc | 5 ++-- - gr-qtgui/lib/const_sink_c_impl.cc | 5 ++-- - gr-qtgui/lib/edit_box_msg_impl.cc | 4 ++- - gr-qtgui/lib/freq_sink_c_impl.cc | 12 ++++++--- - gr-qtgui/lib/freq_sink_f_impl.cc | 12 ++++++--- - gr-qtgui/lib/histogram_sink_f_impl.cc | 5 ++-- - gr-qtgui/lib/sink_c_impl.cc | 4 ++- - gr-qtgui/lib/sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_b_impl.cc | 4 ++- - gr-qtgui/lib/time_raster_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_c_impl.cc | 4 ++- - gr-qtgui/lib/time_sink_f_impl.cc | 4 ++- - gr-qtgui/lib/waterfall_sink_c_impl.cc | 13 +++++++--- - gr-qtgui/lib/waterfall_sink_f_impl.cc | 13 +++++++--- - gr-uhd/lib/usrp_block_impl.cc | 25 ++++++++++++------- - gr-uhd/lib/usrp_source_impl.cc | 5 ++-- - gr-zeromq/lib/pub_msg_sink_impl.cc | 4 ++- - gr-zeromq/lib/push_msg_sink_impl.cc | 4 ++- - 48 files changed, 213 insertions(+), 106 deletions(-) - -diff --git a/docs/usage-manual/(exported from wiki) Message Passing.txt b/docs/usage-manual/(exported from wiki) Message Passing.txt -index 4654bd5da..551e71022 100644 ---- a/docs/usage-manual/(exported from wiki) Message Passing.txt -+++ b/docs/usage-manual/(exported from wiki) Message Passing.txt -@@ -94,7 +94,7 @@ must then bind this port to the message handler. For this, we use - Boost's 'bind' function: - - set_msg_handler(pmt::pmt_t port_id, -- boost::bind(&block_class::message_handler_function, this, _1)); -+ boost::bind(&block_class::message_handler_function, this, boost::placeholders::_1)); - - In Python: - -@@ -241,15 +241,15 @@ The constructor of this block looks like this: - { - message_port_register_in(pmt::mp("print")); - set_msg_handler(pmt::mp("print"), -- boost::bind(&message_debug_impl::print, this, _1)); -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); - set_msg_handler(pmt::mp("store"), -- boost::bind(&message_debug_impl::store, this, _1)); -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); - set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - -diff --git a/gnuradio-runtime/lib/block.cc b/gnuradio-runtime/lib/block.cc -index 591428390..fca4cab97 100644 ---- a/gnuradio-runtime/lib/block.cc -+++ b/gnuradio-runtime/lib/block.cc -@@ -61,7 +61,8 @@ block::block(const std::string& name, - { - global_block_registry.register_primitive(alias(), this); - message_port_register_in(d_system_port); -- set_msg_handler(d_system_port, boost::bind(&block::system_handler, this, _1)); -+ set_msg_handler(d_system_port, -+ boost::bind(&block::system_handler, this, boost::placeholders::_1)); - - configure_default_loggers(d_logger, d_debug_logger, symbol_name()); - } -diff --git a/gr-blocks/lib/copy_impl.cc b/gr-blocks/lib/copy_impl.cc -index c377e57b1..b55196c24 100644 ---- a/gr-blocks/lib/copy_impl.cc -+++ b/gr-blocks/lib/copy_impl.cc -@@ -44,7 +44,9 @@ copy_impl::copy_impl(size_t itemsize) - d_enabled(true) - { - message_port_register_in(pmt::mp("en")); -- set_msg_handler(pmt::mp("en"), boost::bind(©_impl::handle_enable, this, _1)); -+ set_msg_handler( -+ pmt::mp("en"), -+ boost::bind(©_impl::handle_enable, this, boost::placeholders::_1)); - } - - copy_impl::~copy_impl() {} -diff --git a/gr-blocks/lib/message_debug_impl.cc b/gr-blocks/lib/message_debug_impl.cc -index a8c84aa50..916f97ca3 100644 ---- a/gr-blocks/lib/message_debug_impl.cc -+++ b/gr-blocks/lib/message_debug_impl.cc -@@ -90,14 +90,19 @@ message_debug_impl::message_debug_impl() - : block("message_debug", io_signature::make(0, 0, 0), io_signature::make(0, 0, 0)) - { - message_port_register_in(pmt::mp("print")); -- set_msg_handler(pmt::mp("print"), boost::bind(&message_debug_impl::print, this, _1)); -+ set_msg_handler( -+ pmt::mp("print"), -+ boost::bind(&message_debug_impl::print, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("store")); -- set_msg_handler(pmt::mp("store"), boost::bind(&message_debug_impl::store, this, _1)); -+ set_msg_handler( -+ pmt::mp("store"), -+ boost::bind(&message_debug_impl::store, this, boost::placeholders::_1)); - - message_port_register_in(pmt::mp("print_pdu")); -- set_msg_handler(pmt::mp("print_pdu"), -- boost::bind(&message_debug_impl::print_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("print_pdu"), -+ boost::bind(&message_debug_impl::print_pdu, this, boost::placeholders::_1)); - } - - message_debug_impl::~message_debug_impl() {} -diff --git a/gr-blocks/lib/message_strobe_impl.cc b/gr-blocks/lib/message_strobe_impl.cc -index 038eeae5a..d131b8166 100644 ---- a/gr-blocks/lib/message_strobe_impl.cc -+++ b/gr-blocks/lib/message_strobe_impl.cc -@@ -53,8 +53,9 @@ message_strobe_impl::message_strobe_impl(pmt::pmt_t msg, long period_ms) - message_port_register_out(d_port); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_impl::set_msg, this, boost::placeholders::_1)); - } - - message_strobe_impl::~message_strobe_impl() {} -diff --git a/gr-blocks/lib/message_strobe_random_impl.cc b/gr-blocks/lib/message_strobe_random_impl.cc -index 0ab5d6adc..53e641fba 100644 ---- a/gr-blocks/lib/message_strobe_random_impl.cc -+++ b/gr-blocks/lib/message_strobe_random_impl.cc -@@ -74,8 +74,9 @@ message_strobe_random_impl::message_strobe_random_impl( - new gr::thread::thread(boost::bind(&message_strobe_random_impl::run, this))); - - message_port_register_in(pmt::mp("set_msg")); -- set_msg_handler(pmt::mp("set_msg"), -- boost::bind(&message_strobe_random_impl::set_msg, this, _1)); -+ set_msg_handler( -+ pmt::mp("set_msg"), -+ boost::bind(&message_strobe_random_impl::set_msg, this, boost::placeholders::_1)); - } - - long message_strobe_random_impl::next_delay() -diff --git a/gr-blocks/lib/multiply_matrix_impl.cc b/gr-blocks/lib/multiply_matrix_impl.cc -index e1b9c746c..e38953bab 100644 ---- a/gr-blocks/lib/multiply_matrix_impl.cc -+++ b/gr-blocks/lib/multiply_matrix_impl.cc -@@ -235,9 +235,10 @@ multiply_matrix_impl::multiply_matrix_impl( - - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); -- set_msg_handler( -- port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ set_msg_handler(port_name, -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - template <> -@@ -257,7 +258,9 @@ multiply_matrix_impl::multiply_matrix_impl( - pmt::pmt_t port_name = pmt::string_to_symbol("set_A"); - message_port_register_in(port_name); - set_msg_handler(port_name, -- boost::bind(&multiply_matrix_impl::msg_handler_A, this, _1)); -+ boost::bind(&multiply_matrix_impl::msg_handler_A, -+ this, -+ boost::placeholders::_1)); - } - - -diff --git a/gr-blocks/lib/mute_impl.cc b/gr-blocks/lib/mute_impl.cc -index bd65ce207..5c732f8f4 100644 ---- a/gr-blocks/lib/mute_impl.cc -+++ b/gr-blocks/lib/mute_impl.cc -@@ -47,8 +47,9 @@ mute_impl::mute_impl(bool mute) - d_mute(mute) - { - this->message_port_register_in(pmt::intern("set_mute")); -- this->set_msg_handler(pmt::intern("set_mute"), -- boost::bind(&mute_impl::set_mute_pmt, this, _1)); -+ this->set_msg_handler( -+ pmt::intern("set_mute"), -+ boost::bind(&mute_impl::set_mute_pmt, this, boost::placeholders::_1)); - } - - template -diff --git a/gr-blocks/lib/nop_impl.cc b/gr-blocks/lib/nop_impl.cc -index db216d97a..e9baee587 100644 ---- a/gr-blocks/lib/nop_impl.cc -+++ b/gr-blocks/lib/nop_impl.cc -@@ -44,8 +44,9 @@ nop_impl::nop_impl(size_t sizeof_stream_item) - { - // Arrange to have count_received_msgs called when messages are received. - message_port_register_in(pmt::mp("port")); -- set_msg_handler(pmt::mp("port"), -- boost::bind(&nop_impl::count_received_msgs, this, _1)); -+ set_msg_handler( -+ pmt::mp("port"), -+ boost::bind(&nop_impl::count_received_msgs, this, boost::placeholders::_1)); - } - - nop_impl::~nop_impl() {} -diff --git a/gr-blocks/lib/pdu_filter_impl.cc b/gr-blocks/lib/pdu_filter_impl.cc -index b0748eec0..63cfe47e4 100644 ---- a/gr-blocks/lib/pdu_filter_impl.cc -+++ b/gr-blocks/lib/pdu_filter_impl.cc -@@ -44,8 +44,9 @@ pdu_filter_impl::pdu_filter_impl(pmt::pmt_t k, pmt::pmt_t v, bool invert) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_filter_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_filter_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_filter_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_remove_impl.cc b/gr-blocks/lib/pdu_remove_impl.cc -index 19cc4dc76..2b97f827b 100644 ---- a/gr-blocks/lib/pdu_remove_impl.cc -+++ b/gr-blocks/lib/pdu_remove_impl.cc -@@ -42,8 +42,9 @@ pdu_remove_impl::pdu_remove_impl(pmt::pmt_t k) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&pdu_remove_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_remove_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_remove_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/pdu_set_impl.cc b/gr-blocks/lib/pdu_set_impl.cc -index 40fbc3cd8..af59ef70f 100644 ---- a/gr-blocks/lib/pdu_set_impl.cc -+++ b/gr-blocks/lib/pdu_set_impl.cc -@@ -43,7 +43,9 @@ pdu_set_impl::pdu_set_impl(pmt::pmt_t k, pmt::pmt_t v) - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&pdu_set_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&pdu_set_impl::handle_msg, this, boost::placeholders::_1)); - } - - void pdu_set_impl::handle_msg(pmt::pmt_t pdu) -diff --git a/gr-blocks/lib/random_pdu_impl.cc b/gr-blocks/lib/random_pdu_impl.cc -index 75d825aef..6c142c353 100644 ---- a/gr-blocks/lib/random_pdu_impl.cc -+++ b/gr-blocks/lib/random_pdu_impl.cc -@@ -52,8 +52,9 @@ random_pdu_impl::random_pdu_impl(int min_items, - { - message_port_register_out(pdu::pdu_port_id()); - message_port_register_in(pmt::mp("generate")); -- set_msg_handler(pmt::mp("generate"), -- boost::bind(&random_pdu_impl::generate_pdu, this, _1)); -+ set_msg_handler( -+ pmt::mp("generate"), -+ boost::bind(&random_pdu_impl::generate_pdu, this, boost::placeholders::_1)); - if (length_modulo < 1) - throw std::runtime_error("length_module must be >= 1"); - if (max_items < length_modulo) -diff --git a/gr-blocks/lib/repeat_impl.cc b/gr-blocks/lib/repeat_impl.cc -index 189fbc894..d6569625d 100644 ---- a/gr-blocks/lib/repeat_impl.cc -+++ b/gr-blocks/lib/repeat_impl.cc -@@ -44,8 +44,9 @@ repeat_impl::repeat_impl(size_t itemsize, int interp) - d_interp(interp) - { - message_port_register_in(pmt::mp("interpolation")); -- set_msg_handler(pmt::mp("interpolation"), -- boost::bind(&repeat_impl::msg_set_interpolation, this, _1)); -+ set_msg_handler( -+ pmt::mp("interpolation"), -+ boost::bind(&repeat_impl::msg_set_interpolation, this, boost::placeholders::_1)); - } - - void repeat_impl::msg_set_interpolation(pmt::pmt_t msg) -diff --git a/gr-blocks/lib/socket_pdu_impl.cc b/gr-blocks/lib/socket_pdu_impl.cc -index df69f07ad..163eec3a6 100644 ---- a/gr-blocks/lib/socket_pdu_impl.cc -+++ b/gr-blocks/lib/socket_pdu_impl.cc -@@ -101,7 +101,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - start_tcp_accept(); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_server_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_server_send, -+ this, -+ boost::placeholders::_1)); - } else if (type == "TCP_CLIENT") { - boost::system::error_code error = boost::asio::error::host_not_found; - d_tcp_socket.reset(new boost::asio::ip::tcp::socket(d_io_service)); -@@ -111,7 +113,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - d_tcp_socket->set_option(boost::asio::ip::tcp::no_delay(d_tcp_no_delay)); - - set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::tcp_client_send, this, _1)); -+ boost::bind(&socket_pdu_impl::tcp_client_send, -+ this, -+ boost::placeholders::_1)); - - d_tcp_socket->async_read_some( - boost::asio::buffer(d_rxbuf), -@@ -130,8 +134,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else if (type == "UDP_CLIENT") { - d_udp_socket.reset( - new boost::asio::ip::udp::socket(d_io_service, d_udp_endpoint)); -@@ -143,8 +148,9 @@ socket_pdu_impl::socket_pdu_impl(std::string type, - boost::asio::placeholders::error, - boost::asio::placeholders::bytes_transferred)); - -- set_msg_handler(pdu::pdu_port_id(), -- boost::bind(&socket_pdu_impl::udp_send, this, _1)); -+ set_msg_handler( -+ pdu::pdu_port_id(), -+ boost::bind(&socket_pdu_impl::udp_send, this, boost::placeholders::_1)); - } else - throw std::runtime_error("gr::blocks:socket_pdu: unknown socket type"); - -diff --git a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -index 30f4c46dc..34b95d647 100644 ---- a/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -+++ b/gr-blocks/lib/tagged_stream_multiply_length_impl.cc -@@ -49,9 +49,10 @@ tagged_stream_multiply_length_impl::tagged_stream_multiply_length_impl( - set_tag_propagation_policy(TPP_DONT); - set_relative_rate(1, 1); - message_port_register_in(pmt::intern("set_scalar")); -- set_msg_handler( -- pmt::intern("set_scalar"), -- boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, this, _1)); -+ set_msg_handler(pmt::intern("set_scalar"), -+ boost::bind(&tagged_stream_multiply_length_impl::set_scalar_pmt, -+ this, -+ boost::placeholders::_1)); - } - - tagged_stream_multiply_length_impl::~tagged_stream_multiply_length_impl() {} -diff --git a/gr-blocks/lib/tuntap_pdu_impl.cc b/gr-blocks/lib/tuntap_pdu_impl.cc -index 4343ae1dc..0d9d7e28c 100644 ---- a/gr-blocks/lib/tuntap_pdu_impl.cc -+++ b/gr-blocks/lib/tuntap_pdu_impl.cc -@@ -96,7 +96,8 @@ tuntap_pdu_impl::tuntap_pdu_impl(std::string dev, int MTU, bool istunflag) - - // set up input message port - message_port_register_in(pdu::pdu_port_id()); -- set_msg_handler(pdu::pdu_port_id(), boost::bind(&tuntap_pdu_impl::send, this, _1)); -+ set_msg_handler(pdu::pdu_port_id(), -+ boost::bind(&tuntap_pdu_impl::send, this, boost::placeholders::_1)); - } - - int tuntap_pdu_impl::tun_alloc(char* dev, int flags) -diff --git a/gr-digital/lib/chunks_to_symbols_impl.cc b/gr-digital/lib/chunks_to_symbols_impl.cc -index 26d590a66..a6810a69e 100644 ---- a/gr-digital/lib/chunks_to_symbols_impl.cc -+++ b/gr-digital/lib/chunks_to_symbols_impl.cc -@@ -53,8 +53,9 @@ chunks_to_symbols_impl::chunks_to_symbols_impl( - this->message_port_register_in(pmt::mp("set_symbol_table")); - this->set_msg_handler( - pmt::mp("set_symbol_table"), -- boost::bind( -- &chunks_to_symbols_impl::handle_set_symbol_table, this, _1)); -+ boost::bind(&chunks_to_symbols_impl::handle_set_symbol_table, -+ this, -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-digital/lib/constellation_receiver_cb_impl.cc b/gr-digital/lib/constellation_receiver_cb_impl.cc -index 7fb7559d5..7e216ece5 100644 ---- a/gr-digital/lib/constellation_receiver_cb_impl.cc -+++ b/gr-digital/lib/constellation_receiver_cb_impl.cc -@@ -61,14 +61,16 @@ constellation_receiver_cb_impl::constellation_receiver_cb_impl( - "This receiver only works with constellations of dimension 1."); - - message_port_register_in(pmt::mp("set_constellation")); -- set_msg_handler( -- pmt::mp("set_constellation"), -- boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, this, _1)); -+ set_msg_handler(pmt::mp("set_constellation"), -+ boost::bind(&constellation_receiver_cb_impl::handle_set_constellation, -+ this, -+ boost::placeholders::_1)); - - message_port_register_in(pmt::mp("rotate_phase")); -- set_msg_handler( -- pmt::mp("rotate_phase"), -- boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, this, _1)); -+ set_msg_handler(pmt::mp("rotate_phase"), -+ boost::bind(&constellation_receiver_cb_impl::handle_rotate_phase, -+ this, -+ boost::placeholders::_1)); - } - - constellation_receiver_cb_impl::~constellation_receiver_cb_impl() {} -diff --git a/gr-digital/lib/costas_loop_cc_impl.cc b/gr-digital/lib/costas_loop_cc_impl.cc -index c3b30834e..e1229e6f4 100644 ---- a/gr-digital/lib/costas_loop_cc_impl.cc -+++ b/gr-digital/lib/costas_loop_cc_impl.cc -@@ -82,7 +82,9 @@ costas_loop_cc_impl::costas_loop_cc_impl(float loop_bw, int order, bool use_snr) - - message_port_register_in(pmt::mp("noise")); - set_msg_handler(pmt::mp("noise"), -- boost::bind(&costas_loop_cc_impl::handle_set_noise, this, _1)); -+ boost::bind(&costas_loop_cc_impl::handle_set_noise, -+ this, -+ boost::placeholders::_1)); - } - - costas_loop_cc_impl::~costas_loop_cc_impl() {} -diff --git a/gr-digital/lib/crc32_async_bb_impl.cc b/gr-digital/lib/crc32_async_bb_impl.cc -index bffbb2a73..66143866c 100644 ---- a/gr-digital/lib/crc32_async_bb_impl.cc -+++ b/gr-digital/lib/crc32_async_bb_impl.cc -@@ -48,9 +48,13 @@ crc32_async_bb_impl::crc32_async_bb_impl(bool check) - message_port_register_out(d_out_port); - - if (check) -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::check, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::check, this, boost::placeholders::_1)); - else -- set_msg_handler(d_in_port, boost::bind(&crc32_async_bb_impl::calc, this, _1)); -+ set_msg_handler( -+ d_in_port, -+ boost::bind(&crc32_async_bb_impl::calc, this, boost::placeholders::_1)); - } - - crc32_async_bb_impl::~crc32_async_bb_impl() {} -diff --git a/gr-digital/lib/header_payload_demux_impl.cc b/gr-digital/lib/header_payload_demux_impl.cc -index 98c805fb2..7cc1e0a4e 100644 ---- a/gr-digital/lib/header_payload_demux_impl.cc -+++ b/gr-digital/lib/header_payload_demux_impl.cc -@@ -150,9 +150,10 @@ header_payload_demux_impl::header_payload_demux_impl( - } - set_tag_propagation_policy(TPP_DONT); - message_port_register_in(msg_port_id()); -- set_msg_handler( -- msg_port_id(), -- boost::bind(&header_payload_demux_impl::parse_header_data_msg, this, _1)); -+ set_msg_handler(msg_port_id(), -+ boost::bind(&header_payload_demux_impl::parse_header_data_msg, -+ this, -+ boost::placeholders::_1)); - for (size_t i = 0; i < special_tags.size(); i++) { - d_special_tags.push_back(pmt::string_to_symbol(special_tags[i])); - d_special_tags_last_value.push_back(pmt::PMT_NIL); -diff --git a/gr-digital/lib/protocol_formatter_async_impl.cc b/gr-digital/lib/protocol_formatter_async_impl.cc -index 84b693745..c08bbb9ae 100644 ---- a/gr-digital/lib/protocol_formatter_async_impl.cc -+++ b/gr-digital/lib/protocol_formatter_async_impl.cc -@@ -55,7 +55,9 @@ protocol_formatter_async_impl::protocol_formatter_async_impl( - message_port_register_out(d_pld_port); - - set_msg_handler(d_in_port, -- boost::bind(&protocol_formatter_async_impl::append, this, _1)); -+ boost::bind(&protocol_formatter_async_impl::append, -+ this, -+ boost::placeholders::_1)); - } - - protocol_formatter_async_impl::~protocol_formatter_async_impl() {} -diff --git a/gr-fec/lib/async_decoder_impl.cc b/gr-fec/lib/async_decoder_impl.cc -index e7a668c83..5d68d13ae 100644 ---- a/gr-fec/lib/async_decoder_impl.cc -+++ b/gr-fec/lib/async_decoder_impl.cc -@@ -65,10 +65,14 @@ async_decoder_impl::async_decoder_impl(generic_decoder::sptr my_decoder, - if (d_packed) { - d_pack = new blocks::kernel::pack_k_bits(8); - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_packed, this, _1)); -+ boost::bind(&async_decoder_impl::decode_packed, -+ this, -+ boost::placeholders::_1)); - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_decoder_impl::decode_unpacked, this, _1)); -+ boost::bind(&async_decoder_impl::decode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - // The maximum frame size is set by the initial frame size of the decoder. -diff --git a/gr-fec/lib/async_encoder_impl.cc b/gr-fec/lib/async_encoder_impl.cc -index 811d55601..506ae5c7e 100644 ---- a/gr-fec/lib/async_encoder_impl.cc -+++ b/gr-fec/lib/async_encoder_impl.cc -@@ -64,7 +64,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - if (d_packed) { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_packed, this, _1)); -+ boost::bind(&async_encoder_impl::encode_packed, -+ this, -+ boost::placeholders::_1)); - - d_unpack = new blocks::kernel::unpack_k_bits(8); - -@@ -74,7 +76,9 @@ async_encoder_impl::async_encoder_impl(generic_encoder::sptr my_encoder, - - } else { - set_msg_handler(d_in_port, -- boost::bind(&async_encoder_impl::encode_unpacked, this, _1)); -+ boost::bind(&async_encoder_impl::encode_unpacked, -+ this, -+ boost::placeholders::_1)); - } - - if (d_packed || (strncmp(d_encoder->get_input_conversion(), "pack", 4) == 0)) { -diff --git a/gr-fec/lib/depuncture_bb_impl.cc b/gr-fec/lib/depuncture_bb_impl.cc -index 27d00bb5b..f64dad45f 100644 ---- a/gr-fec/lib/depuncture_bb_impl.cc -+++ b/gr-fec/lib/depuncture_bb_impl.cc -@@ -74,7 +74,9 @@ depuncture_bb_impl::depuncture_bb_impl(int puncsize, int puncpat, int delay, cha - set_fixed_rate(true); - set_relative_rate((uint64_t)d_puncsize, (uint64_t)(d_puncsize - d_puncholes)); - set_output_multiple(d_puncsize); -- // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&depuncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - depuncture_bb_impl::~depuncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_bb_impl.cc b/gr-fec/lib/puncture_bb_impl.cc -index a365d6a69..f2078d8c5 100644 ---- a/gr-fec/lib/puncture_bb_impl.cc -+++ b/gr-fec/lib/puncture_bb_impl.cc -@@ -72,7 +72,9 @@ puncture_bb_impl::puncture_bb_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_bb_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_bb_impl::~puncture_bb_impl() {} -diff --git a/gr-fec/lib/puncture_ff_impl.cc b/gr-fec/lib/puncture_ff_impl.cc -index c95288d69..95fb649a8 100644 ---- a/gr-fec/lib/puncture_ff_impl.cc -+++ b/gr-fec/lib/puncture_ff_impl.cc -@@ -72,7 +72,9 @@ puncture_ff_impl::puncture_ff_impl(int puncsize, int puncpat, int delay) - set_fixed_rate(true); - set_relative_rate((uint64_t)(d_puncsize - d_puncholes), (uint64_t)d_puncsize); - set_output_multiple(d_puncsize - d_puncholes); -- // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, this, _1)); -+ // set_msg_handler(boost::bind(&puncture_ff_impl::catch_msg, -+ // this, -+ // boost::placeholders::_1)); - } - - puncture_ff_impl::~puncture_ff_impl() {} -diff --git a/gr-filter/lib/freq_xlating_fir_filter_impl.cc b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -index 8ddc967ba..50ec58947 100644 ---- a/gr-filter/lib/freq_xlating_fir_filter_impl.cc -+++ b/gr-filter/lib/freq_xlating_fir_filter_impl.cc -@@ -72,7 +72,7 @@ freq_xlating_fir_filter_impl::freq_xlating_fir_filter_impl( - boost::bind( - &freq_xlating_fir_filter_impl::handle_set_center_freq, - this, -- _1)); -+ boost::placeholders::_1)); - } - - template -diff --git a/gr-filter/lib/mmse_resampler_cc_impl.cc b/gr-filter/lib/mmse_resampler_cc_impl.cc -index 59f9eacfa..bdce51716 100644 ---- a/gr-filter/lib/mmse_resampler_cc_impl.cc -+++ b/gr-filter/lib/mmse_resampler_cc_impl.cc -@@ -52,8 +52,9 @@ mmse_resampler_cc_impl::mmse_resampler_cc_impl(float phase_shift, float resamp_r - - set_inverse_relative_rate(d_mu_inc); - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_cc_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_cc_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_cc_impl::~mmse_resampler_cc_impl() { delete d_resamp; } -diff --git a/gr-filter/lib/mmse_resampler_ff_impl.cc b/gr-filter/lib/mmse_resampler_ff_impl.cc -index 342d9f767..3d7272711 100644 ---- a/gr-filter/lib/mmse_resampler_ff_impl.cc -+++ b/gr-filter/lib/mmse_resampler_ff_impl.cc -@@ -53,8 +53,9 @@ mmse_resampler_ff_impl::mmse_resampler_ff_impl(float phase_shift, float resamp_r - set_inverse_relative_rate(d_mu_inc); - - message_port_register_in(pmt::intern("msg_in")); -- set_msg_handler(pmt::intern("msg_in"), -- boost::bind(&mmse_resampler_ff_impl::handle_msg, this, _1)); -+ set_msg_handler( -+ pmt::intern("msg_in"), -+ boost::bind(&mmse_resampler_ff_impl::handle_msg, this, boost::placeholders::_1)); - } - - mmse_resampler_ff_impl::~mmse_resampler_ff_impl() { delete d_resamp; } -diff --git a/gr-qtgui/lib/const_sink_c_impl.cc b/gr-qtgui/lib/const_sink_c_impl.cc -index 852f6ee10..04d421d03 100644 ---- a/gr-qtgui/lib/const_sink_c_impl.cc -+++ b/gr-qtgui/lib/const_sink_c_impl.cc -@@ -69,8 +69,9 @@ const_sink_c_impl::const_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&const_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&const_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - for (int i = 0; i < d_nconnections; i++) { - d_residbufs_real.push_back( -diff --git a/gr-qtgui/lib/edit_box_msg_impl.cc b/gr-qtgui/lib/edit_box_msg_impl.cc -index 8713aa820..39546cbf3 100644 ---- a/gr-qtgui/lib/edit_box_msg_impl.cc -+++ b/gr-qtgui/lib/edit_box_msg_impl.cc -@@ -158,7 +158,9 @@ edit_box_msg_impl::edit_box_msg_impl(data_type_t type, - message_port_register_out(d_port); - message_port_register_in(pmt::mp("val")); - -- set_msg_handler(pmt::mp("val"), boost::bind(&edit_box_msg_impl::set_value, this, _1)); -+ set_msg_handler( -+ pmt::mp("val"), -+ boost::bind(&edit_box_msg_impl::set_value, this, boost::placeholders::_1)); - } - - edit_box_msg_impl::~edit_box_msg_impl() -diff --git a/gr-qtgui/lib/freq_sink_c_impl.cc b/gr-qtgui/lib/freq_sink_c_impl.cc -index 3a34df6ec..fe231699f 100644 ---- a/gr-qtgui/lib/freq_sink_c_impl.cc -+++ b/gr-qtgui/lib/freq_sink_c_impl.cc -@@ -82,17 +82,23 @@ freq_sink_c_impl::freq_sink_c_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_c_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_c_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/freq_sink_f_impl.cc b/gr-qtgui/lib/freq_sink_f_impl.cc -index c14bfc31f..7090d8699 100644 ---- a/gr-qtgui/lib/freq_sink_f_impl.cc -+++ b/gr-qtgui/lib/freq_sink_f_impl.cc -@@ -82,17 +82,23 @@ freq_sink_f_impl::freq_sink_f_impl(int fftsize, - - // setup bw input port - message_port_register_in(d_port_bw); -- set_msg_handler(d_port_bw, boost::bind(&freq_sink_f_impl::handle_set_bw, this, _1)); -+ set_msg_handler( -+ d_port_bw, -+ boost::bind(&freq_sink_f_impl::handle_set_bw, this, boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&freq_sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&freq_sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&freq_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&freq_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/histogram_sink_f_impl.cc b/gr-qtgui/lib/histogram_sink_f_impl.cc -index d16de932c..1602d1896 100644 ---- a/gr-qtgui/lib/histogram_sink_f_impl.cc -+++ b/gr-qtgui/lib/histogram_sink_f_impl.cc -@@ -81,8 +81,9 @@ histogram_sink_f_impl::histogram_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&histogram_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&histogram_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (int i = 0; i < d_nconnections + 1; i++) { -diff --git a/gr-qtgui/lib/sink_c_impl.cc b/gr-qtgui/lib/sink_c_impl.cc -index d3feb9d16..73136e789 100644 ---- a/gr-qtgui/lib/sink_c_impl.cc -+++ b/gr-qtgui/lib/sink_c_impl.cc -@@ -96,7 +96,9 @@ sink_c_impl::sink_c_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_c_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_c_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/sink_f_impl.cc b/gr-qtgui/lib/sink_f_impl.cc -index 418b630b7..d31023a51 100644 ---- a/gr-qtgui/lib/sink_f_impl.cc -+++ b/gr-qtgui/lib/sink_f_impl.cc -@@ -95,7 +95,9 @@ sink_f_impl::sink_f_impl(int fftsize, - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); -- set_msg_handler(d_port, boost::bind(&sink_f_impl::handle_set_freq, this, _1)); -+ set_msg_handler( -+ d_port, -+ boost::bind(&sink_f_impl::handle_set_freq, this, boost::placeholders::_1)); - - d_main_gui = NULL; - -diff --git a/gr-qtgui/lib/time_raster_sink_b_impl.cc b/gr-qtgui/lib/time_raster_sink_b_impl.cc -index 045c216b0..3aa503ccf 100644 ---- a/gr-qtgui/lib/time_raster_sink_b_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_b_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_b_impl::time_raster_sink_b_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_b_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_b_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_scale = 1.0f; - -diff --git a/gr-qtgui/lib/time_raster_sink_f_impl.cc b/gr-qtgui/lib/time_raster_sink_f_impl.cc -index d186f319d..b3516e5be 100644 ---- a/gr-qtgui/lib/time_raster_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_raster_sink_f_impl.cc -@@ -84,7 +84,9 @@ time_raster_sink_f_impl::time_raster_sink_f_impl(double samp_rate, - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); - set_msg_handler(pmt::mp("in"), -- boost::bind(&time_raster_sink_f_impl::handle_pdus, this, _1)); -+ boost::bind(&time_raster_sink_f_impl::handle_pdus, -+ this, -+ boost::placeholders::_1)); - - d_icols = static_cast(ceil(d_cols)); - d_tmpflt = (float*)volk_malloc(d_icols * sizeof(float), volk_get_alignment()); -diff --git a/gr-qtgui/lib/time_sink_c_impl.cc b/gr-qtgui/lib/time_sink_c_impl.cc -index b73a1c1ad..83fbda298 100644 ---- a/gr-qtgui/lib/time_sink_c_impl.cc -+++ b/gr-qtgui/lib/time_sink_c_impl.cc -@@ -80,7 +80,9 @@ time_sink_c_impl::time_sink_c_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - - // +2 for the PDU message buffers - for (unsigned int n = 0; n < d_nconnections + 2; n++) { -diff --git a/gr-qtgui/lib/time_sink_f_impl.cc b/gr-qtgui/lib/time_sink_f_impl.cc -index df13998d7..dd5ed12c8 100644 ---- a/gr-qtgui/lib/time_sink_f_impl.cc -+++ b/gr-qtgui/lib/time_sink_f_impl.cc -@@ -80,7 +80,9 @@ time_sink_f_impl::time_sink_f_impl(int size, - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&time_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&time_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - - // +1 for the PDU buffer - for (unsigned int n = 0; n < d_nconnections + 1; n++) { -diff --git a/gr-qtgui/lib/waterfall_sink_c_impl.cc b/gr-qtgui/lib/waterfall_sink_c_impl.cc -index fcf2ed98b..da38d32ba 100644 ---- a/gr-qtgui/lib/waterfall_sink_c_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_c_impl.cc -@@ -118,19 +118,24 @@ waterfall_sink_c_impl::waterfall_sink_c_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_c_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_c_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_c_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_c_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_c_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_c_impl::~waterfall_sink_c_impl() -diff --git a/gr-qtgui/lib/waterfall_sink_f_impl.cc b/gr-qtgui/lib/waterfall_sink_f_impl.cc -index aa1037a47..d4231a564 100644 ---- a/gr-qtgui/lib/waterfall_sink_f_impl.cc -+++ b/gr-qtgui/lib/waterfall_sink_f_impl.cc -@@ -116,19 +116,24 @@ waterfall_sink_f_impl::waterfall_sink_f_impl(int fftsize, - // setup bw input port - message_port_register_in(d_port_bw); - set_msg_handler(d_port_bw, -- boost::bind(&waterfall_sink_f_impl::handle_set_bw, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_bw, -+ this, -+ boost::placeholders::_1)); - - // setup output message port to post frequency when display is - // double-clicked - message_port_register_out(d_port); - message_port_register_in(d_port); - set_msg_handler(d_port, -- boost::bind(&waterfall_sink_f_impl::handle_set_freq, this, _1)); -+ boost::bind(&waterfall_sink_f_impl::handle_set_freq, -+ this, -+ boost::placeholders::_1)); - - // setup PDU handling input port - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), -- boost::bind(&waterfall_sink_f_impl::handle_pdus, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&waterfall_sink_f_impl::handle_pdus, this, boost::placeholders::_1)); - } - - waterfall_sink_f_impl::~waterfall_sink_f_impl() -diff --git a/gr-uhd/lib/usrp_block_impl.cc b/gr-uhd/lib/usrp_block_impl.cc -index 4f030159f..697d633c1 100644 ---- a/gr-uhd/lib/usrp_block_impl.cc -+++ b/gr-uhd/lib/usrp_block_impl.cc -@@ -137,12 +137,18 @@ usrp_block_impl::usrp_block_impl(const ::uhd::device_addr_t& device_addr, - // Set up message ports: - message_port_register_in(pmt::mp("command")); - set_msg_handler(pmt::mp("command"), -- boost::bind(&usrp_block_impl::msg_handler_command, this, _1)); -+ boost::bind(&usrp_block_impl::msg_handler_command, -+ this, -+ boost::placeholders::_1)); - - // cuz we lazy: --#define REGISTER_CMD_HANDLER(key, _handler) \ -- register_msg_cmd_handler(key, \ -- boost::bind(&usrp_block_impl::_handler, this, _1, _2, _3)) -+#define REGISTER_CMD_HANDLER(key, _handler) \ -+ register_msg_cmd_handler(key, \ -+ boost::bind(&usrp_block_impl::_handler, \ -+ this, \ -+ boost::placeholders::_1, \ -+ boost::placeholders::_2, \ -+ boost::placeholders::_3)) - // Register default command handlers: - REGISTER_CMD_HANDLER(cmd_freq_key(), _cmd_handler_freq); - REGISTER_CMD_HANDLER(cmd_gain_key(), _cmd_handler_gain); -@@ -257,11 +263,12 @@ bool usrp_block_impl::_check_mboard_sensors_locked() - } else if (_dev->get_clock_source(mboard_index) == "mimo") { - sensor_name = "mimo_locked"; - } -- if (not _wait_for_locked_sensor( -- get_mboard_sensor_names(mboard_index), -- sensor_name, -- boost::bind( -- &usrp_block_impl::get_mboard_sensor, this, _1, mboard_index))) { -+ if (not _wait_for_locked_sensor(get_mboard_sensor_names(mboard_index), -+ sensor_name, -+ boost::bind(&usrp_block_impl::get_mboard_sensor, -+ this, -+ boost::placeholders::_1, -+ mboard_index))) { - GR_LOG_WARN( - d_logger, - boost::format( -diff --git a/gr-uhd/lib/usrp_source_impl.cc b/gr-uhd/lib/usrp_source_impl.cc -index a2ff0821b..5e6bd4328 100644 ---- a/gr-uhd/lib/usrp_source_impl.cc -+++ b/gr-uhd/lib/usrp_source_impl.cc -@@ -57,8 +57,9 @@ usrp_source_impl::usrp_source_impl(const ::uhd::device_addr_t& device_addr, - - _samp_rate = this->get_samp_rate(); - _samps_per_packet = 1; -- register_msg_cmd_handler(cmd_tag_key(), -- boost::bind(&usrp_source_impl::_cmd_handler_tag, this, _1)); -+ register_msg_cmd_handler( -+ cmd_tag_key(), -+ boost::bind(&usrp_source_impl::_cmd_handler_tag, this, boost::placeholders::_1)); - } - - usrp_source_impl::~usrp_source_impl() {} -diff --git a/gr-zeromq/lib/pub_msg_sink_impl.cc b/gr-zeromq/lib/pub_msg_sink_impl.cc -index b5da7421e..957cfa411 100644 ---- a/gr-zeromq/lib/pub_msg_sink_impl.cc -+++ b/gr-zeromq/lib/pub_msg_sink_impl.cc -@@ -62,7 +62,9 @@ pub_msg_sink_impl::pub_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&pub_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&pub_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - pub_msg_sink_impl::~pub_msg_sink_impl() -diff --git a/gr-zeromq/lib/push_msg_sink_impl.cc b/gr-zeromq/lib/push_msg_sink_impl.cc -index 4140781ab..7d07d3a30 100644 ---- a/gr-zeromq/lib/push_msg_sink_impl.cc -+++ b/gr-zeromq/lib/push_msg_sink_impl.cc -@@ -62,7 +62,9 @@ push_msg_sink_impl::push_msg_sink_impl(char* address, int timeout, bool bind) - } - - message_port_register_in(pmt::mp("in")); -- set_msg_handler(pmt::mp("in"), boost::bind(&push_msg_sink_impl::handler, this, _1)); -+ set_msg_handler( -+ pmt::mp("in"), -+ boost::bind(&push_msg_sink_impl::handler, this, boost::placeholders::_1)); - } - - push_msg_sink_impl::~push_msg_sink_impl() --- -2.26.2 - diff --git a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch b/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch deleted file mode 100644 index 6b8987fa5f..0000000000 --- a/package/gnuradio/0003-gnuradio-runtime_pmt-dont-hardcode-INTERFACE_INCLUDE_DIRECTORIES.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 84dea8284c521f08508bb2dcbc99db3b5d3438fd Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Thu, 27 Aug 2020 17:32:09 +0200 -Subject: [PATCH] gnuradio-runtime_pmt: dont hardcode - INTERFACE_INCLUDE_DIRECTORIES - -gnuradio-runtimeTargets.cmake and gnuradio-pmtTargets.cmake are filled -using CMAKE_INSTALL_PREFIX for INSTALL_INTERFACE. - -Since CMAKE_INSTALL_PREFIX, in buildroot, is set to /usr, these files contains -path to host system. - -With BR2_COMPILER_PARANOID_UNSAFE_PATH package using gnuradio fails with: -arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-isystem' '/usr/include' - -By simply providing 'include', produced .cmake contains: -INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" -instead of -INTERFACE_INCLUDE_DIRECTORIES "/usr/include" - -[Upstream status: https://github.com/gnuradio/gnuradio/pull/3737] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gnuradio-runtime/lib/CMakeLists.txt | 2 +- - gnuradio-runtime/lib/pmt/CMakeLists.txt | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gnuradio-runtime/lib/CMakeLists.txt b/gnuradio-runtime/lib/CMakeLists.txt -index 5aa90a5e1..fc32f473b 100644 ---- a/gnuradio-runtime/lib/CMakeLists.txt -+++ b/gnuradio-runtime/lib/CMakeLists.txt -@@ -214,7 +214,7 @@ target_link_libraries(gnuradio-runtime PUBLIC - - target_include_directories(gnuradio-runtime - PUBLIC -- $ -+ $ - $ - $ - PRIVATE -diff --git a/gnuradio-runtime/lib/pmt/CMakeLists.txt b/gnuradio-runtime/lib/pmt/CMakeLists.txt -index 9fb98d0fc..6dfcd945c 100644 ---- a/gnuradio-runtime/lib/pmt/CMakeLists.txt -+++ b/gnuradio-runtime/lib/pmt/CMakeLists.txt -@@ -33,7 +33,7 @@ target_link_libraries(gnuradio-pmt - - target_include_directories(gnuradio-pmt - PUBLIC -- $ -+ $ - $ - PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/ - ) --- -2.26.2 - diff --git a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch b/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch deleted file mode 100644 index 034c10c5cc..0000000000 --- a/package/gnuradio/0004-gr-qtgui-dont-t-add-examples-c-subdirectory-when-gr-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 268b1a599304f58bd56c86ff09041b5912c24a0c Mon Sep 17 00:00:00 2001 -From: Gwenhael Goavec-Merou -Date: Sun, 1 Nov 2020 17:24:36 +0100 -Subject: [PATCH] gr-qtgui: dont't add examples/c++ subdirectory when gr-analog - is disabled - -gr-qtgui examples needs to have gr-analog enabled, without this dependency -compile crash with: - -In file included from -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.cc:22: -/x/output/build/gnuradio-3.8.1.0/gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. -make[3]: *** [gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/build.make:67: -gr-qtgui/examples/c++/CMakeFiles/display_qt.dir/display_qt.cc.o] Error 1 -make[3]: *** Waiting for unfinished jobs.... -In file included from -/somewhere/gnuradio/build/gr-qtgui/examples/c++/moc_display_qt.cpp:10: -/somewhere/gnuradio/build/gr-qtgui/examples/c++/../../../../gr-qtgui/examples/c++/display_qt.h:24:10: -fatal error: gnuradio/analog/noise_source.h: No such file or directory -24 | #include -| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -compilation terminated. - -GR_ANALOG is not an explicit dependency of GR_QTGUI, so disable c++ examples if -user has not selected this option. - -[backported from 7470a7a3771dd90defb826b464dfe62977cb1eb6] - -Signed-off-by: Gwenhael Goavec-Merou ---- - gr-qtgui/CMakeLists.txt | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/gr-qtgui/CMakeLists.txt b/gr-qtgui/CMakeLists.txt -index 8831f3ad9..561186fbd 100644 ---- a/gr-qtgui/CMakeLists.txt -+++ b/gr-qtgui/CMakeLists.txt -@@ -68,7 +68,9 @@ if(ENABLE_GR_QTGUI) - add_subdirectory(include/gnuradio/qtgui) - add_subdirectory(lib) - add_subdirectory(docs) --add_subdirectory(examples/c++) -+if (ENABLE_GR_ANALOG) -+ add_subdirectory(examples/c++) -+endif(ENABLE_GR_ANALOG) - if(ENABLE_PYTHON) - add_subdirectory(swig) - add_subdirectory(python/qtgui) --- -2.26.2 - diff --git a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch b/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch deleted file mode 100644 index 0c282b7322..0000000000 --- a/package/gnuradio/0005-boost-remove-deprecated-math-common_factor.hpp.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 2c767bb260a25b415e8c9c4b3ea37280b2127cec Mon Sep 17 00:00:00 2001 -From: japm48 -Date: Fri, 10 Apr 2020 23:35:30 +0200 -Subject: [PATCH] boost: remove deprecated math/common_factor.hpp - -Remove deprecation warning and prefer using std::{lcm,gcd} to Boost. -Fixes #2712. - -[Retrieved from: -https://github.com/gnuradio/gnuradio/commit/2c767bb260a25b415e8c9c4b3ea37280b2127cec] -Signed-off-by: Fabrice Fontaine ---- - .../include/gnuradio/CMakeLists.txt | 1 + - .../include/gnuradio/integer_math.h | 35 +++++++++++++++++++ - gnuradio-runtime/lib/buffer.cc | 19 ++-------- - gr-digital/lib/symbol_sync_cc_impl.cc | 4 +-- - gr-digital/lib/symbol_sync_ff_impl.cc | 4 +-- - 5 files changed, 43 insertions(+), 20 deletions(-) - create mode 100644 gnuradio-runtime/include/gnuradio/integer_math.h - -diff --git a/gnuradio-runtime/include/gnuradio/CMakeLists.txt b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -index 8d718e87b5b..056af5d6f48 100644 ---- a/gnuradio-runtime/include/gnuradio/CMakeLists.txt -+++ b/gnuradio-runtime/include/gnuradio/CMakeLists.txt -@@ -31,6 +31,7 @@ install(FILES - gr_complex.h - hier_block2.h - high_res_timer.h -+ integer_math.h - io_signature.h - logger.h - math.h -diff --git a/gnuradio-runtime/include/gnuradio/integer_math.h b/gnuradio-runtime/include/gnuradio/integer_math.h -new file mode 100644 -index 00000000000..15141049fa4 ---- /dev/null -+++ b/gnuradio-runtime/include/gnuradio/integer_math.h -@@ -0,0 +1,35 @@ -+/* -*- c++ -*- */ -+/* -+ * Copyright 2020 Free Software Foundation, Inc. -+ * -+ * This file is part of GNU Radio -+ * -+ * SPDX-License-Identifier: GPL-3.0-or-later -+ * -+ */ -+#ifndef INCLUDED_GR_INTEGER_MATH_H -+#define INCLUDED_GR_INTEGER_MATH_H -+ -+#if (__cplusplus >= 201703L) -+ -+// Prefer C++17 goodness. -+#include -+#define GR_GCD std::gcd -+#define GR_LCM std::lcm -+ -+#elif (BOOST_VERSION >= 105800) -+ -+// Fallback: newer boost API (introduced in Boost 1.58.0). -+#include -+#define GR_GCD boost::integer::gcd -+#define GR_LCM boost::integer::lcm -+ -+#else -+ -+// Last resort: old deprecated boost API. -+#include -+#define GR_GCD boost::math::gcd -+#define GR_LCM boost::math::lcm -+ -+#endif /* __cplusplus >= 201703L */ -+#endif /* INCLUDED_GR_INTEGER_MATH_H */ -diff --git a/gnuradio-runtime/lib/buffer.cc b/gnuradio-runtime/lib/buffer.cc -index 720c72c4ee8..46d704542b1 100644 ---- a/gnuradio-runtime/lib/buffer.cc -+++ b/gnuradio-runtime/lib/buffer.cc -@@ -13,22 +13,13 @@ - #endif - #include "vmcircbuf.h" - #include -+#include - #include - #include - #include - #include - #include - --// the following header is deprecated as of Boost 1.66.0, and the --// other API was introduced in Boost 1.58.0. Since we still support --// Boost back to 1.54.0, use the older API if pre-1.5.80 and otherwise --// use the newer API. --#if (BOOST_VERSION < 105800) --#include --#else --#include --#endif -- - namespace gr { - - static long s_buffer_count = 0; // counts for debugging storage mgmt -@@ -68,13 +59,9 @@ static long s_buffer_reader_count = 0; - * - * type_size * nitems == k * page_size - */ --static long minimum_buffer_items(long type_size, long page_size) -+static inline long minimum_buffer_items(long type_size, long page_size) - { --#if (BOOST_VERSION < 105800) -- return page_size / boost::math::gcd(type_size, page_size); --#else -- return page_size / boost::integer::gcd(type_size, page_size); --#endif -+ return page_size / GR_GCD(type_size, page_size); - } - - -diff --git a/gr-digital/lib/symbol_sync_cc_impl.cc b/gr-digital/lib/symbol_sync_cc_impl.cc -index 55f85e7c6a7..55f162dc727 100644 ---- a/gr-digital/lib/symbol_sync_cc_impl.cc -+++ b/gr-digital/lib/symbol_sync_cc_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_cc_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -95,7 +95,7 @@ symbol_sync_cc_impl::symbol_sync_cc_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_ccf"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - -diff --git a/gr-digital/lib/symbol_sync_ff_impl.cc b/gr-digital/lib/symbol_sync_ff_impl.cc -index d0ec32ab192..1172c1b4f8a 100644 ---- a/gr-digital/lib/symbol_sync_ff_impl.cc -+++ b/gr-digital/lib/symbol_sync_ff_impl.cc -@@ -13,9 +13,9 @@ - #endif - - #include "symbol_sync_ff_impl.h" -+#include - #include - #include --#include - #include - - namespace gr { -@@ -97,7 +97,7 @@ symbol_sync_ff_impl::symbol_sync_ff_impl(enum ted_type detector_type, - throw std::runtime_error("unable to create interpolating_resampler_fff"); - - // Block Internal Clocks -- d_interps_per_symbol_n = boost::math::lcm(d_ted->inputs_per_symbol(), d_osps_n); -+ d_interps_per_symbol_n = GR_LCM(d_ted->inputs_per_symbol(), d_osps_n); - d_interps_per_ted_input_n = d_interps_per_symbol_n / d_ted->inputs_per_symbol(); - d_interps_per_output_sample_n = d_interps_per_symbol_n / d_osps_n; - diff --git a/package/gnuradio/Config.in b/package/gnuradio/Config.in index 103175946c..de19732cfb 100644 --- a/package/gnuradio/Config.in +++ b/package/gnuradio/Config.in @@ -15,19 +15,19 @@ config BR2_PACKAGE_GNURADIO depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL depends on BR2_USE_MMU # use fork() depends on BR2_USE_WCHAR # boost - depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-filesystem + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic, boost-thread depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # boost-thread select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_ATOMIC select BR2_PACKAGE_BOOST_DATE_TIME - select BR2_PACKAGE_BOOST_FILESYSTEM select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS select BR2_PACKAGE_BOOST_REGEX select BR2_PACKAGE_BOOST_SYSTEM select BR2_PACKAGE_BOOST_THREAD select BR2_PACKAGE_LOG4CPP select BR2_PACKAGE_GMP + select BR2_PACKAGE_SPDLOG select BR2_PACKAGE_VOLK help GNU Radio is a free & open-source software development @@ -81,6 +81,7 @@ config BR2_PACKAGE_GNURADIO_PYTHON depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL # python-numpy select BR2_PACKAGE_BOOST_PYTHON select BR2_PACKAGE_PYTHON_NUMPY # runtime + select BR2_PACKAGE_PYTHON_PYBIND select BR2_PACKAGE_PYTHON_SIX # runtime help Enable python component diff --git a/package/gnuradio/gnuradio.hash b/package/gnuradio/gnuradio.hash index 90343cf385..efa0bb462b 100644 --- a/package/gnuradio/gnuradio.hash +++ b/package/gnuradio/gnuradio.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3e293541a9ac8d78660762bae8b80c0f6195b3494e1c50c01a9fd79cc60bb624 gnuradio-3.8.2.0.tar.gz +sha256 c6b9f59447a842559b00b3a67b4ca1186e9adb8db742b25400507fedc747f2bd gnuradio-3.10.4.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gnuradio/gnuradio.mk b/package/gnuradio/gnuradio.mk index e36dce081c..cc41f1e12b 100644 --- a/package/gnuradio/gnuradio.mk +++ b/package/gnuradio/gnuradio.mk @@ -4,22 +4,19 @@ # ################################################################################ -GNURADIO_VERSION = 3.8.2.0 -GNURADIO_SITE = https://github.com/gnuradio/gnuradio/releases/download/v$(GNURADIO_VERSION) +GNURADIO_VERSION = 3.10.4.0 +GNURADIO_SITE = $(call github,gnuradio,gnuradio,v$(GNURADIO_VERSION)) GNURADIO_LICENSE = GPL-3.0+ GNURADIO_LICENSE_FILES = COPYING GNURADIO_SUPPORTS_IN_SOURCE_BUILD = NO -# host-python-mako and host-python-six are needed for volk to compile GNURADIO_DEPENDENCIES = \ host-python3 \ - host-python-mako \ - host-python-six \ - host-swig \ boost \ log4cpp \ gmp \ + spdlog \ volk GNURADIO_CONF_OPTS = \ @@ -115,7 +112,8 @@ GNURADIO_CONF_OPTS += -DENABLE_GR_FILTER=OFF endif ifeq ($(BR2_PACKAGE_GNURADIO_PYTHON),y) -GNURADIO_DEPENDENCIES += python3 +GNURADIO_DEPENDENCIES += python3 python-pybind \ + host-python-numpy host-python-packaging GNURADIO_CONF_OPTS += -DENABLE_PYTHON=ON # mandatory to install python modules in site-packages and to use # correct path for python libraries -- 2.30.2 From eero.aaltonen at vaisala.com Wed Oct 19 14:32:19 2022 From: eero.aaltonen at vaisala.com (Eero Aaltonen) Date: Wed, 19 Oct 2022 17:32:19 +0300 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package Message-ID: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Add docopt.cpp library that can be used to create intuitive command line interfaces with very little code by describing the valid calls using the (POSIX.1-2017) command line utility argument syntax. Signed-off-by: Eero Aaltonen --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/docopt.cpp/Config.in | 15 +++++++++++++++ package/docopt.cpp/docopt.cpp.hash | 6 ++++++ package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ 5 files changed, 38 insertions(+) create mode 100644 package/docopt.cpp/Config.in create mode 100644 package/docopt.cpp/docopt.cpp.hash create mode 100644 package/docopt.cpp/docopt.cpp.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..8972bab2d1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -777,6 +777,9 @@ F: board/acmesystems/acqua-a5/ F: configs/acmesystems_acqua_a5_256mb_defconfig F: configs/acmesystems_acqua_a5_512mb_defconfig +N: Eero Aaltonen +F: package/docopt.cpp/ + N: Eloi Bail F: package/bayer2rgb-neon/ F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..77f86328ce 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2113,6 +2113,7 @@ endmenu menu "Text and terminal handling" source "package/augeas/Config.in" + source "package/docopt.cpp/Config.in" source "package/enchant/Config.in" source "package/fmt/Config.in" source "package/fstrcmp/Config.in" diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in new file mode 100644 index 0000000000..655a656398 --- /dev/null +++ b/package/docopt.cpp/Config.in @@ -0,0 +1,15 @@ +config BR2_PACKAGE_DOCOPT_CPP + bool "docopt.cpp" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 + help + docopt is a library that lets you define a command line + interface with the utility argument syntax that has been + used by command line utilities for decades (POSIX.1-2017). + From the description, docopt automatically generates a parser + for the command line arguments. + + docopt Command-line interface description language + http://docopt.org/ + + docopt C++ port https://github.com/docopt/docopt.cpp diff --git a/package/docopt.cpp/docopt.cpp.hash b/package/docopt.cpp/docopt.cpp.hash new file mode 100644 index 0000000000..f8a7f8d97b --- /dev/null +++ b/package/docopt.cpp/docopt.cpp.hash @@ -0,0 +1,6 @@ +# Locally computed: +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 v0.6.3.tar.gz + +# Hash for license files: +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE-Boost-1.0 +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 LICENSE-MIT diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/docopt.cpp.mk new file mode 100644 index 0000000000..647071243a --- /dev/null +++ b/package/docopt.cpp/docopt.cpp.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# docopt.cpp +# +################################################################################ + +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags +DOCOPT_CPP_INSTALL_STAGING = YES +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT + +$(eval $(cmake-package)) -- 2.25.1 From angelo at amarulasolutions.com Wed Oct 19 14:55:36 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 16:55:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package In-Reply-To: <20221019143219.329504-1-eero.aaltonen@vaisala.com> References: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Message-ID: On Wed, Oct 19, 2022 at 4:33 PM Eero Aaltonen via buildroot < buildroot at buildroot.org> wrote: > Add docopt.cpp library that can be used to create intuitive command > line interfaces with very little code by describing the valid calls > using the (POSIX.1-2017) command line utility argument syntax. > > Signed-off-by: Eero Aaltonen > Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci --- > Good to me. Testing: * check-package * legal-info * compiling from source for an architecture > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/docopt.cpp/Config.in | 15 +++++++++++++++ > package/docopt.cpp/docopt.cpp.hash | 6 ++++++ > package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ > 5 files changed, 38 insertions(+) > create mode 100644 package/docopt.cpp/Config.in > create mode 100644 package/docopt.cpp/docopt.cpp.hash > create mode 100644 package/docopt.cpp/docopt.cpp.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index c0e6f8bbef..8972bab2d1 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -777,6 +777,9 @@ F: board/acmesystems/acqua-a5/ > F: configs/acmesystems_acqua_a5_256mb_defconfig > F: configs/acmesystems_acqua_a5_512mb_defconfig > > +N: Eero Aaltonen > +F: package/docopt.cpp/ > + > N: Eloi Bail > F: package/bayer2rgb-neon/ > F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..77f86328ce 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -2113,6 +2113,7 @@ endmenu > > menu "Text and terminal handling" > source "package/augeas/Config.in" > + source "package/docopt.cpp/Config.in" > source "package/enchant/Config.in" > source "package/fmt/Config.in" > source "package/fstrcmp/Config.in" > diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in > new file mode 100644 > index 0000000000..655a656398 > --- /dev/null > +++ b/package/docopt.cpp/Config.in > @@ -0,0 +1,15 @@ > +config BR2_PACKAGE_DOCOPT_CPP > + bool "docopt.cpp" > + depends on BR2_INSTALL_LIBSTDCPP > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 > + help > + docopt is a library that lets you define a command line > + interface with the utility argument syntax that has been > + used by command line utilities for decades (POSIX.1-2017). > + From the description, docopt automatically generates a parser > + for the command line arguments. > + > + docopt Command-line interface description language > + http://docopt.org/ > + > + docopt C++ port https://github.com/docopt/docopt.cpp > diff --git a/package/docopt.cpp/docopt.cpp.hash > b/package/docopt.cpp/docopt.cpp.hash > new file mode 100644 > index 0000000000..f8a7f8d97b > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.hash > @@ -0,0 +1,6 @@ > +# Locally computed: > +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 > v0.6.3.tar.gz > + > +# Hash for license files: > +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 > LICENSE-Boost-1.0 > +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 > LICENSE-MIT > diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/ > docopt.cpp.mk > new file mode 100644 > index 0000000000..647071243a > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.mk > @@ -0,0 +1,13 @@ > > +################################################################################ > +# > +# docopt.cpp > +# > > +################################################################################ > + > +DOCOPT_CPP_VERSION = 0.6.3 > +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz > +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags > +DOCOPT_CPP_INSTALL_STAGING = YES > +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT > + > +$(eval $(cmake-package)) > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 15:18:52 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 17:18:52 +0200 Subject: [Buildroot] [PATCH] package/openvmtools: fix local privilege escalation vulnerability In-Reply-To: References: Message-ID: On Wed, Oct 19, 2022 at 10:45 AM Stefan Agner wrote: > Add a patch for CVE-2022-31676 (local privilege escalation > vulnerability). > It would be nice if you could add a more complete description like this: Fixes the following security issues: - CVE-2022-36359: Potential reflected file download vulnerability in FileResponse (4.0.7) https://www.djangoproject.com/weblog/2022/aug/03/security-releases/ > > Signed-off-by: Stefan Agner > --- > ...uthorization-on-incoming-guestOps-re.patch | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 > package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > > diff --git > a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > new file mode 100644 > index 0000000000..cae2e82f08 > --- /dev/null > +++ > b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch > @@ -0,0 +1,36 @@ > +From 4f5cfc23dd3357bafc8b699dd5c558f000a534c3 Mon Sep 17 00:00:00 2001 > +From: John Wolfe > +Date: Wed, 10 Aug 2022 06:12:02 -0700 > +Subject: [PATCH] Properly check authorization on incoming guestOps > requests > + > +Fix public pipe request checks. Only a SessionRequest type should > +be accepted on the public pipe. > +--- > + open-vm-tools/vgauth/serviceImpl/proto.c | 6 +++++- > + 1 file changed, 5 insertions(+), 1 deletion(-) > + > +diff --git a/open-vm-tools/vgauth/serviceImpl/proto.c > b/open-vm-tools/vgauth/serviceImpl/proto.c > +index dc1dfd7..9e04991 100644 > +--- a/open-vm-tools/vgauth/serviceImpl/proto.c > ++++ b/open-vm-tools/vgauth/serviceImpl/proto.c > +@@ -1,5 +1,5 @@ > + /********************************************************* > +- * Copyright (C) 2011-2016,2019 VMware, Inc. All rights reserved. > ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > it > + * under the terms of the GNU Lesser General Public License as published > +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, > + VGAuthError err; > + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); > + > ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { > ++ return VGAUTH_E_PERMISSION_DENIED; > ++ } > ++ > + switch (req->reqType) { > + /* > + * This comes over the public connection; alwsys let it through. > +-- > +2.6.2 > + > -- > 2.38.0 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From luca.ceresoli at bootlin.com Wed Oct 19 16:15:05 2022 From: luca.ceresoli at bootlin.com (Luca Ceresoli) Date: Wed, 19 Oct 2022 18:15:05 +0200 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> References: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> Message-ID: <20221019181505.37f9c2b8@booty> Hi Giulio, On Wed, 19 Oct 2022 15:48:23 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. > > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti Reviewed-by: Luca Ceresoli Thanks! -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From angelo at amarulasolutions.com Wed Oct 19 16:14:37 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 18:14:37 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: <20221002150443.159058-1-robimarko@gmail.com> References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Sun, Oct 2, 2022 at 5:05 PM Robert Marko wrote: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko > --- > Changes in v2: > * Correct license > * Add host-pkgconf to DEPENDENCIES > * Add minimal required kernel config options > --- > package/Config.in | 1 + > package/mdio-tools/Config.in | 9 +++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 33 insertions(+) > create mode 100644 package/mdio-tools/Config.in > create mode 100644 package/mdio-tools/mdio-tools.hash > create mode 100644 package/mdio-tools/mdio-tools.mk > > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..ed41e8bdd4 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -536,6 +536,7 @@ endmenu > source "package/mbpfan/Config.in" > source "package/mdadm/Config.in" > source "package/mdevd/Config.in" > + source "package/mdio-tools/Config.in" > source "package/memtest86/Config.in" > source "package/memtester/Config.in" > source "package/memtool/Config.in" > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..feb1e825ac > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,9 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 I think you miss this here > + select BR2_PACKAGE_LIBMNL > + help > + Low-level debug tools for MDIO devices > diff --git a/package/mdio-tools/mdio-tools.hash > b/package/mdio-tools/mdio-tools.hash > new file mode 100644 > index 0000000000..0111165f27 > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.hash > @@ -0,0 +1,3 @@ > +# Locally computed > +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 > mdio-tools-1.2.0.tar.gz > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > COPYING > diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/ > mdio-tools.mk > new file mode 100644 > index 0000000000..308a23824b > --- /dev/null > +++ b/package/mdio-tools/mdio-tools.mk > @@ -0,0 +1,20 @@ > > +################################################################################ > +# > +# mdio-tools > +# > > +################################################################################ > + > +MDIO_TOOLS_VERSION = 1.2.0 > +MDIO_TOOLS_SITE = > https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) > +MDIO_TOOLS_LICENSE = GPL-2.0 > +MDIO_TOOLS_LICENSE_FILES = COPYING > +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl > + > +MDIO_TOOLS_MODULE_SUBDIRS = kernel > +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) > + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) > +endef > + > +$(eval $(kernel-module)) > +$(eval $(autotools-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Wed Oct 19 16:16:31 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Wed, 19 Oct 2022 18:16:31 +0200 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 1:46 AM Giulio Benetti < giulio.benetti at benettiengineering.com> wrote: > At the moment all APIs folders are copied to target increasing the size of > rootfs of ~190MB. Allow to select which API folders we want to copy to > target to shrink rootfs down. > > Signed-off-by: Giulio Benetti > Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci > --- > Looks good to me, even if I'm not sure how much this will be used. Mono is usually run on beefy hardware where you have plenty of space. It's a nice addition anyway. package/mono/Config.in | 16 ++++++++++++++++ > package/mono/mono.mk | 12 ++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/package/mono/Config.in b/package/mono/Config.in > index 76178bcf9b..8690ee68ef 100644 > --- a/package/mono/Config.in > +++ b/package/mono/Config.in > @@ -23,6 +23,22 @@ config BR2_PACKAGE_MONO > > http://download.mono-project.com/sources/mono/ > > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + bool "Specify folders to install to target" > + help > + Allow to specify which Mono folder to install to target > + > +if BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + > +config BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL > + string "Mono folders to install to target" > + help > + Paths to Mono folders to install to target /usr/lib/mono/. > + Only these folders will be copied to the target and not all > + the built ones. You can provide a list of folders separated by > + by spaces. > + > +endif > comment "mono needs a toolchain w/ C++, NPTL, dynamic library" > depends on BR2_PACKAGE_MONO_ARCH_SUPPORTS > depends on !BR2_INSTALL_LIBSTDCPP || \ > diff --git a/package/mono/mono.mk b/package/mono/mono.mk > index 219effc5d3..8036d23205 100644 > --- a/package/mono/mono.mk > +++ b/package/mono/mono.mk > @@ -30,10 +30,22 @@ MONO_CONF_OPTS = $(MONO_COMMON_CONF_OPTS) > --disable-mcs-build > > # The libraries have been built by the host-mono build. Since they are > # architecture-independent, we simply copy them to the target. > +ifeq ($(BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL),y) > +# Copy only selected folders > +define MONO_INSTALL_LIBS > + mkdir -p $(TARGET_DIR)/usr/lib/mono > + (for dir in $(call qstrip,$(BR2_PACKAGE_MONO_FOLDERS_TO_INSTALL)); > do \ > + rsync -av --exclude=*.so --exclude=*.mdb \ > + $(HOST_DIR)/lib/mono/$${dir} $(TARGET_DIR)/usr/lib/mono; \ > + done) > +endef > +else > +# Copy all folders > define MONO_INSTALL_LIBS > rsync -av --exclude=*.so --exclude=*.mdb \ > $(HOST_DIR)/lib/mono $(TARGET_DIR)/usr/lib/ > endef > +endif > > MONO_POST_INSTALL_TARGET_HOOKS += MONO_INSTALL_LIBS > > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From nhed+buildroot at starry.com Wed Oct 19 17:51:51 2022 From: nhed+buildroot at starry.com (Nevo Hed) Date: Wed, 19 Oct 2022 13:51:51 -0400 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance Message-ID: <20221019175151.1030079-1-nhed+buildroot@starry.com> Noticed a significant slowdown with rise of number of external trees in our env. This slowdown seemed to be related to invocations if the percent_defconfig function (GNU Make 4.3). While I have not do a deep dive in analyzing the performance issue, it felt like redefining the %_defconfig rule N times impact performance. This patch makes %_defconfig a single rule which combines uses the first return of a wildcard expression. Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external trees: #Trees Before After 1 0.38 0.37 2 0.32 0.31 3 0.31 0.33 4 0.36 0.32 5 0.45 0.35 6 1.26 0.36 7 9.10 0.36 8 85.93 0.42 Signed-off-by: Nevo Hed --- Makefile | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/Makefile b/Makefile index ec7c034ac1..a8298dd5fd 100644 --- a/Makefile +++ b/Makefile @@ -1010,13 +1010,12 @@ oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmake defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN) -define percent_defconfig -# Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig -%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig outputmakefile - @$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \ - $$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN) -endef -$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep))) +%_defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile + @defconfig=$(firstword $(foreach d,\ + $(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(wildcard $(d)/configs/$@))); \ + if [ -z "$${defconfig}" ]; then echo "Can't find $@" >&2; exit 1; fi; \ + $(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$${defconfig} \ + $< --defconfig=$${defconfig} $(CONFIG_CONFIG_IN) update-defconfig: savedefconfig -- 2.37.3 From fontaine.fabrice at gmail.com Wed Oct 19 18:23:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 20:23:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/imagemagick: security bump to version 7.1.0-51 Message-ID: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> Fix CVE-2022-3213: A heap buffer overflow issue was found in ImageMagick. When an application processes a malformed TIFF file, it could lead to undefined behavior or a crash causing a denial of service. https://github.com/ImageMagick/Website/blob/main/ChangeLog.md Signed-off-by: Fabrice Fontaine --- package/imagemagick/imagemagick.hash | 2 +- package/imagemagick/imagemagick.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/imagemagick/imagemagick.hash b/package/imagemagick/imagemagick.hash index ff0f3e26c6..8988dad5da 100644 --- a/package/imagemagick/imagemagick.hash +++ b/package/imagemagick/imagemagick.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3df6ca6dff15a4e8a20b4593c60285a59e38890440494d91a344e5c0e2bb3eec imagemagick-7.1.0-45.tar.gz +sha256 4333ef2fe63f2510988af82b726f5b1919ebd54037ea6674566c69fcceb67e11 imagemagick-7.1.0-51.tar.gz sha256 8cceeb67d4e783cb63075c7311fdb990fa0369ee80fbd0f481064cd02386ca2d LICENSE diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk index 893606ff01..6bdf24c1e8 100644 --- a/package/imagemagick/imagemagick.mk +++ b/package/imagemagick/imagemagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMAGEMAGICK_VERSION = 7.1.0-45 +IMAGEMAGICK_VERSION = 7.1.0-51 IMAGEMAGICK_SITE = $(call github,ImageMagick,ImageMagick,$(IMAGEMAGICK_VERSION)) IMAGEMAGICK_LICENSE = Apache-2.0 IMAGEMAGICK_LICENSE_FILES = LICENSE -- 2.35.1 From yann.morin.1998 at free.fr Wed Oct 19 18:25:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 20:25:21 +0200 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance In-Reply-To: <20221019175151.1030079-1-nhed+buildroot@starry.com> References: <20221019175151.1030079-1-nhed+buildroot@starry.com> Message-ID: <20221019182521.GF3666@scaer> Nevo, All, On 2022-10-19 13:51 -0400, Nevo Hed spake thusly: > Noticed a significant slowdown with rise of number of external trees > in our env. This slowdown seemed to be related to invocations if the > percent_defconfig function (GNU Make 4.3). We already have a pending patch to address this issue: https://patchwork.ozlabs.org/project/buildroot/patch/20220920194645.670432-1-yann.morin.1998 at free.fr/ > While I have not do a deep dive in analyzing the performance issue, it > felt like redefining the %_defconfig rule N times impact performance. Please, no first-person sentences in commit log (i.e., no "I"). > This patch makes %_defconfig a single rule which combines uses the > first return of a wildcard expression. I can certainly see that this looks a bit simpler than my proposal. Hoever, I am not too fond of it, because it defers the test that the defconfig exists into the shell rather than the Makefile. I don't know, maybe it is in fact better because we can print a more user-friendly error message... > Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external > trees: > > #Trees Before After > 1 0.38 0.37 > 2 0.32 0.31 > 3 0.31 0.33 > 4 0.36 0.32 > 5 0.45 0.35 > 6 1.26 0.36 > 7 9.10 0.36 > 8 85.93 0.42 Weird. For me, starting at 6 external trees, the time to completion directly exploded above the hour. One interesting point, though is that the duration does not seem to be much impacted by the number of br?external trees. Could you test with up to 1000 trees, like I did? Regards, Yann E. MORIN. > Signed-off-by: Nevo Hed > --- > Makefile | 13 ++++++------- > 1 file changed, 6 insertions(+), 7 deletions(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..a8298dd5fd 100644 > --- a/Makefile > +++ b/Makefile > @@ -1010,13 +1010,12 @@ oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmake > defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile > @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN) > > -define percent_defconfig > -# Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig > -%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig outputmakefile > - @$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \ > - $$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN) > -endef > -$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep))) > +%_defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile > + @defconfig=$(firstword $(foreach d,\ > + $(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(wildcard $(d)/configs/$@))); \ > + if [ -z "$${defconfig}" ]; then echo "Can't find $@" >&2; exit 1; fi; \ > + $(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$${defconfig} \ > + $< --defconfig=$${defconfig} $(CONFIG_CONFIG_IN) > > update-defconfig: savedefconfig > > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Wed Oct 19 19:46:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 13:46:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-setuptools: bump to version 65.5.0 Message-ID: <20221019194613.145290-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-setuptools/python-setuptools.hash | 4 ++-- package/python-setuptools/python-setuptools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-setuptools/python-setuptools.hash b/package/python-setuptools/python-setuptools.hash index 3f68084068..2592fc201c 100644 --- a/package/python-setuptools/python-setuptools.hash +++ b/package/python-setuptools/python-setuptools.hash @@ -1,4 +1,4 @@ # From https://pypi.org/pypi/setuptools/json -md5 66c6b8819c5306c12c38d7fad41b7f99 setuptools-65.3.0.tar.gz -sha256 7732871f4f7fa58fb6bdcaeadb0161b2bd046c85905dbaa066bdcbcc81953b57 setuptools-65.3.0.tar.gz +md5 9018a18990e7c16159ec3972affba76c setuptools-65.5.0.tar.gz +sha256 512e5536220e38146176efb833d4a62aa726b7bbff82cfbc8ba9eaa3996e0b17 setuptools-65.5.0.tar.gz sha256 db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8 LICENSE diff --git a/package/python-setuptools/python-setuptools.mk b/package/python-setuptools/python-setuptools.mk index b7483c6347..9dc0a6a38b 100644 --- a/package/python-setuptools/python-setuptools.mk +++ b/package/python-setuptools/python-setuptools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_SETUPTOOLS_VERSION = 65.3.0 +PYTHON_SETUPTOOLS_VERSION = 65.5.0 PYTHON_SETUPTOOLS_SOURCE = setuptools-$(PYTHON_SETUPTOOLS_VERSION).tar.gz -PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/cc/83/7ea9d9b3a6ff3225aca2fce5e4df373bee7e0a74c539711a4fbfda53374f +PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/c5/41/247814d8b7a044717164c74080725a6c8f3d2b5fc82b34bd825b617df663 PYTHON_SETUPTOOLS_LICENSE = MIT PYTHON_SETUPTOOLS_LICENSE_FILES = LICENSE PYTHON_SETUPTOOLS_CPE_ID_VENDOR = python -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 19 19:55:19 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 19 Oct 2022 21:55:19 +0200 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 Message-ID: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Fixes: http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ Signed-off-by: Giulio Benetti --- package/libnss/libnss.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk index 041b2cfc56..a613006f70 100644 --- a/package/libnss/libnss.mk +++ b/package/libnss/libnss.mk @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING LIBNSS_CPE_ID_VENDOR = mozilla LIBNSS_CPE_ID_PRODUCT = nss -# Don't parallel build if make version = 4.3 -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) +# Don't parallel build if make version = 4.3 or 4.4 +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) LIBNSS_MAKE = $(MAKE1) else LIBNSS_MAKE = $(MAKE) -- 2.34.1 From fontaine.fabrice at gmail.com Wed Oct 19 20:00:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 22:00:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/poppler: security bump to version 22.10.0 Message-ID: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an integer overflow in the JBIG2 decoder (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a specially crafted PDF file or JBIG2 image could lead to a crash or the execution of arbitrary code. This is similar to the vulnerability described by CVE-2022-38171 in Xpdf. - Drop patch (already in version) https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS Signed-off-by: Fabrice Fontaine --- ...h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch | 27 ------------------- package/poppler/poppler.hash | 2 +- package/poppler/poppler.mk | 2 +- 3 files changed, 2 insertions(+), 29 deletions(-) delete mode 100644 package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch diff --git a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch b/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch deleted file mode 100644 index 40af6a2e00..0000000000 --- a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3ea6bca90d87d3f91556205c4e58ca425c6ac437 Mon Sep 17 00:00:00 2001 -From: Marco Genasci -Date: Sun, 12 Dec 2021 10:23:37 +0100 -Subject: [PATCH] Include setjmp.h when WITH_JPEG=yes and WITH_PNG=no - -[Retrieved from: -https://gitlab.freedesktop.org/poppler/poppler/-/commit/3ea6bca90d87d3f91556205c4e58ca425c6ac437] -Signed-off-by: Fabrice Fontaine ---- - poppler/ImageEmbeddingUtils.cc | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/poppler/ImageEmbeddingUtils.cc b/poppler/ImageEmbeddingUtils.cc -index 5c50f1269..c26b9eb2a 100644 ---- a/poppler/ImageEmbeddingUtils.cc -+++ b/poppler/ImageEmbeddingUtils.cc -@@ -16,6 +16,7 @@ - extern "C" { - # include - } -+# include - #endif - #ifdef ENABLE_LIBPNG - # include --- -GitLab - diff --git a/package/poppler/poppler.hash b/package/poppler/poppler.hash index cf6c537063..93681e04af 100644 --- a/package/poppler/poppler.hash +++ b/package/poppler/poppler.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 acb840c2c1ec07d07e53c57c4b3a1ff3e3ee2d888d44e1e9f2f01aaf16814de7 poppler-21.12.0.tar.xz +sha256 04e40fad924a6de62e63017a6fd4c04696c1f526dedc2ba5ef275cedf646292a poppler-22.10.0.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/poppler/poppler.mk b/package/poppler/poppler.mk index db6da25d39..5524bfc420 100644 --- a/package/poppler/poppler.mk +++ b/package/poppler/poppler.mk @@ -4,7 +4,7 @@ # ################################################################################ -POPPLER_VERSION = 21.12.0 +POPPLER_VERSION = 22.10.0 POPPLER_SOURCE = poppler-$(POPPLER_VERSION).tar.xz POPPLER_SITE = https://poppler.freedesktop.org POPPLER_DEPENDENCIES = fontconfig host-pkgconf -- 2.35.1 From yann.morin.1998 at free.fr Wed Oct 19 20:52:36 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 22:52:36 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> Message-ID: <20221019205236.GG3666@scaer> Simon, All, On 2022-10-19 18:15 +0200, Simon Richter spake thusly: > Use the `cargo vendor` output to generate the vendor configuration. > > Fixes the need to patch the configuration if there are > dependencies that do not come from crates.io. Could you provide a bit more details on how this works? For example, we create a config file with: [source.crates-io] replace-with = "vendored-sources" [source.vendored-sources] directory = "VENDOR" What would a similar config be like when using dependencies not coming from crates.io? Also, can we have a package that uses non-crates.io dependencies, so that we have a test-case to ensure we have no regression? > Signed-off-by: Simon Richter > --- > support/download/cargo-post-process | 11 ++++------- > 1 file changed, 4 insertions(+), 7 deletions(-) > > diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process > index a4a4718a2a..7d6ecdb030 100755 > --- a/support/download/cargo-post-process > +++ b/support/download/cargo-post-process > @@ -22,17 +22,14 @@ post_process_unpack "${base_name}" "${output}" > > # Do the Cargo vendoring > pushd "${base_name}" > /dev/null > -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > > # Create the local .cargo/config with vendor info > mkdir -p .cargo/ > -cat <.cargo/config > -[source.crates-io] > -replace-with = "vendored-sources" > +cargo vendor \ > + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > + --locked VENDOR 2>&1 \ > + | sed -ne '1,/To use vendored sources, add/!p' > .cargo/config This means that vendoring step is then entirely silent, and there is no progress report. Since the download during the vendoring can be quite big, that means a long pause without any feedback to the user that something is going on. Also, if there is a download issue, there is no way to find what happened. Can we keep the vendoring to stdout as it currently is, and re-run it right after, just to generate the config.toml file? I.e. something like: cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR 2>&1 \ |sed -ne '1,/To use vendored sources, add/!p' > .cargo/config I've quickly hacked the existing script to run it twice, and it looks like the second call generates the exact same output, so we should be covered. Finally, unrelated to your change: if the package already has a .cargo/config.toml, then we irremediably override it. Is there something in that file that would otherwise be required to do the build? Can we simply append to the file rather than overwrite it, i.e.: .... >> .cargo/config.toml Note that if we want to change that, this should be a different patch, of course. Regards, Yann E. MORIN. > -[source.vendored-sources] > -directory = "VENDOR" > -EOF > popd > /dev/null > > post_process_repack "$(pwd)" "${base_name}" "${output}" > -- > 2.38.0 > -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Wed Oct 19 21:05:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Wed, 19 Oct 2022 23:05:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds In-Reply-To: <20221019085353.8864-1-moritz@h6t.eu> References: <20221019085353.8864-1-moritz@h6t.eu> Message-ID: <20221019210519.GH3666@scaer> Moritz, All, On 2022-10-19 10:53 +0200, Moritz Bitsch via buildroot spake thusly: > From: Moritz Bitsch > > * when not supplying --release to cargo various optimizations get disabled, > resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG > > * Debug symbol generation can be controlled with the RUSTFLAGS variable: > add -g to RUSTFLAGS for debug symbols Two changes, two patches, please. Yes, they are very related, but the second one is a new feature, so should be a separate patch. > Signed-off-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..7ce7867f67 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ > # and should be removed when fixed upstream > # > ifeq ($(NORMALIZED_ARCH),arm) > - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" > + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition > endif > > +ifeq ($(BR2_ENABLE_DEBUG),y) > + PKG_CARGO_RUSTFLAGS += -g > +endif > + > +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) I was about to say that we had the make-comma-list macro for that, and that's too bad I badly named it, because it also introduces a space after the comma, so it is not fitted here... We could tweak it not to introduce the space, but it is also used to create meson lists, and I'm not sure the space is required there or not. If it's not, then we can tweak it (and introduce make-comma-sp-list if needed elsewhere). Meh, forget it... Regards, Yann E. MORIN. > HOST_PKG_CARGO_ENV = \ > $(PKG_COMMON_CARGO_ENV) > > @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS > $$($(2)_CARGO_ENV) \ > cargo build \ > --offline \ > - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > --manifest-path Cargo.toml \ > --locked \ > $$($(2)_CARGO_BUILD_OPTS) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From moritz at h6t.eu Wed Oct 19 21:29:44 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Wed, 19 Oct 2022 23:29:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo.mk: fix handling of debug and runtime debug builds In-Reply-To: <20221019210519.GH3666@scaer> References: <20221019085353.8864-1-moritz@h6t.eu> <20221019210519.GH3666@scaer> Message-ID: <38052548-1bbc-ea4e-de3b-88875218b812@h6t.eu> Hi Yann, Am 19.10.22 um 23:05 schrieb Yann E. MORIN: > Moritz, All, > > On 2022-10-19 10:53 +0200, Moritz Bitsch via buildroot spake thusly: >> From: Moritz Bitsch >> >> * when not supplying --release to cargo various optimizations get disabled, >> resulting in slower runtime: use BR2_ENABLE_RUNTIME_DEBUG >> >> * Debug symbol generation can be controlled with the RUSTFLAGS variable: >> add -g to RUSTFLAGS for debug symbols > Two changes, two patches, please. Yes, they are very related, but the > second one is a new feature, so should be a separate patch. Sure, I'm going to split the commit and re submit the patch. Sorry for the noise. Regards, Moritz Bitsch >> Signed-off-by: Moritz Bitsch >> --- >> package/pkg-cargo.mk | 10 ++++++++-- >> 1 file changed, 8 insertions(+), 2 deletions(-) >> >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >> index f7e3f39503..7ce7867f67 100644 >> --- a/package/pkg-cargo.mk >> +++ b/package/pkg-cargo.mk >> @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ >> # and should be removed when fixed upstream >> # >> ifeq ($(NORMALIZED_ARCH),arm) >> - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" >> + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition >> endif >> >> +ifeq ($(BR2_ENABLE_DEBUG),y) >> + PKG_CARGO_RUSTFLAGS += -g >> +endif >> + >> +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) > I was about to say that we had the make-comma-list macro for that, and > that's too bad I badly named it, because it also introduces a space > after the comma, so it is not fitted here... > > We could tweak it not to introduce the space, but it is also used to > create meson lists, and I'm not sure the space is required there or not. > If it's not, then we can tweak it (and introduce make-comma-sp-list if > needed elsewhere). > > Meh, forget it... > > Regards, > Yann E. MORIN. > >> HOST_PKG_CARGO_ENV = \ >> $(PKG_COMMON_CARGO_ENV) >> >> @@ -119,7 +125,7 @@ define $(2)_BUILD_CMDS >> $$($(2)_CARGO_ENV) \ >> cargo build \ >> --offline \ >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >> --manifest-path Cargo.toml \ >> --locked \ >> $$($(2)_CARGO_BUILD_OPTS) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Wed Oct 19 21:52:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 19 Oct 2022 23:52:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/acpid: bump to version 2.0.34 Message-ID: <20221019215201.21248-1-fontaine.fabrice@gmail.com> Drop second patch (source code was merged with https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 and moved with https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog Signed-off-by: Fabrice Fontaine --- package/acpid/0002-add-missing-defines.patch | 40 -------------------- package/acpid/acpid.hash | 6 +-- package/acpid/acpid.mk | 2 +- 3 files changed, 4 insertions(+), 44 deletions(-) delete mode 100644 package/acpid/0002-add-missing-defines.patch diff --git a/package/acpid/0002-add-missing-defines.patch b/package/acpid/0002-add-missing-defines.patch deleted file mode 100644 index a85315911f..0000000000 --- a/package/acpid/0002-add-missing-defines.patch +++ /dev/null @@ -1,40 +0,0 @@ -Add missing MSG_CMSG_CLOEXEC - -Unpatched uClibc toolchains, even using the latest 0.9.33.2, do not -have the MSG_CMSG_CLOEXEC definition. Even though the Buildroot -internal toolchain backend has a uClibc patch to provide it, it -doesn't apply to external toolchains. This patch provides the -definition of MSG_CMSG_CLOEXEC. - -Signed-off-by: Thomas Petazzoni - -Index: b/libnetlink.h -=================================================================== ---- a/libnetlink.h -+++ b/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; -Index: b/kacpimon/libnetlink.h -=================================================================== ---- a/kacpimon/libnetlink.h -+++ b/kacpimon/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; diff --git a/package/acpid/acpid.hash b/package/acpid/acpid.hash index d5e5bcc14b..8da0101264 100644 --- a/package/acpid/acpid.hash +++ b/package/acpid/acpid.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/acpid2/files/ -md5 b2f2ca633b30ae893c47981fa4d3b258 acpid-2.0.33.tar.xz -sha1 b3e06c3f2213db8ee1a9024cf372fb30e2fab637 acpid-2.0.33.tar.xz +md5 988c2e3fd5ba0ea4492d3ba7273af295 acpid-2.0.34.tar.xz +sha1 9322112027e4aa5a8d1b97ec64ef1d150ff0f4fc acpid-2.0.34.tar.xz # Locally computed -sha256 0856f71b3eb34a1b663d0a8e6363dfcbc519e63d847330498898658e2972dbe8 acpid-2.0.33.tar.xz +sha256 2d095c8cfcbc847caec746d62cdc8d0bff1ec1bc72ef7c674c721e04da6ab333 acpid-2.0.34.tar.xz sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/acpid/acpid.mk b/package/acpid/acpid.mk index 5d5138baa3..4bd93068ad 100644 --- a/package/acpid/acpid.mk +++ b/package/acpid/acpid.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPID_VERSION = 2.0.33 +ACPID_VERSION = 2.0.34 ACPID_SOURCE = acpid-$(ACPID_VERSION).tar.xz ACPID_SITE = http://downloads.sourceforge.net/project/acpid2 ACPID_LICENSE = GPL-2.0+ -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:42 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:42 -0600 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build Message-ID: <20221019215348.3262192-1-james.hilliard1@gmail.com> This will be needed for the upcoming host-python-hatchling. Signed-off-by: James Hilliard --- package/python-pluggy/python-pluggy.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk index 59382518ed..6dc6f970ea 100644 --- a/package/python-pluggy/python-pluggy.mk +++ b/package/python-pluggy/python-pluggy.mk @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools PYTHON_PLUGGY_LICENSE = MIT PYTHON_PLUGGY_LICENSE_FILES = LICENSE PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm $(eval $(python-package)) +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:43 -0600 Subject: [Buildroot] [PATCH 2/7] package/python-editables: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-2-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-editables/python-editables.hash | 5 +++++ package/python-editables/python-editables.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) create mode 100644 package/python-editables/python-editables.hash create mode 100644 package/python-editables/python-editables.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..5784c4bca2 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1378,6 +1378,7 @@ F: package/python-cbor2/ F: package/python-cchardet/ F: package/python-charset-normalizer/ F: package/python-cssselect2/ +F: package/python-editables/ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ diff --git a/package/python-editables/python-editables.hash b/package/python-editables/python-editables.hash new file mode 100644 index 0000000000..3c28c44cc3 --- /dev/null +++ b/package/python-editables/python-editables.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/editables/json +md5 e91709fbb0ef586cb7b785042068ab67 editables-0.3.tar.gz +sha256 167524e377358ed1f1374e61c268f0d7a4bf7dbd046c656f7b410cde16161b1a editables-0.3.tar.gz +# Locally computed sha256 checksums +sha256 c73e08a04e1557fdb49525fb7a579f73bcab84a254910b9350ee56daf143932d LICENSE.txt diff --git a/package/python-editables/python-editables.mk b/package/python-editables/python-editables.mk new file mode 100644 index 0000000000..db67e7a16d --- /dev/null +++ b/package/python-editables/python-editables.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-editables +# +################################################################################ + +PYTHON_EDITABLES_VERSION = 0.3 +PYTHON_EDITABLES_SOURCE = editables-$(PYTHON_EDITABLES_VERSION).tar.gz +PYTHON_EDITABLES_SITE = https://files.pythonhosted.org/packages/01/b0/a2a87db4b6cb8e7d57004b6836faa634e0747e3e39ded126cdbe5a33ba36 +PYTHON_EDITABLES_LICENSE = MIT +PYTHON_EDITABLES_LICENSE_FILES = LICENSE.txt +PYTHON_EDITABLES_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:44 -0600 Subject: [Buildroot] [PATCH 3/7] package/python-pathspec: new packages In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-3-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-pathspec/python-pathspec.hash | 5 +++++ package/python-pathspec/python-pathspec.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) create mode 100644 package/python-pathspec/python-pathspec.hash create mode 100644 package/python-pathspec/python-pathspec.mk diff --git a/DEVELOPERS b/DEVELOPERS index 5784c4bca2..48d2193db6 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1389,6 +1389,7 @@ F: package/python-logstash/ F: package/python-maturin/ F: package/python-multidict/ F: package/python-mypy-extensions/ +F: package/python-pathspec/ F: package/python-pep517/ F: package/python-pycares/ F: package/python-pydyf/ diff --git a/package/python-pathspec/python-pathspec.hash b/package/python-pathspec/python-pathspec.hash new file mode 100644 index 0000000000..91e4fb85b7 --- /dev/null +++ b/package/python-pathspec/python-pathspec.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/pathspec/json +md5 6f4fde5e701d328a2846d206edb63aa9 pathspec-0.10.1.tar.gz +sha256 7ace6161b621d31e7902eb6b5ae148d12cfd23f4a249b9ffb6b9fee12084323d pathspec-0.10.1.tar.gz +# Locally computed sha256 checksums +sha256 fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85 LICENSE diff --git a/package/python-pathspec/python-pathspec.mk b/package/python-pathspec/python-pathspec.mk new file mode 100644 index 0000000000..ccb794cce9 --- /dev/null +++ b/package/python-pathspec/python-pathspec.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pathspec +# +################################################################################ + +PYTHON_PATHSPEC_VERSION = 0.10.1 +PYTHON_PATHSPEC_SOURCE = pathspec-$(PYTHON_PATHSPEC_VERSION).tar.gz +PYTHON_PATHSPEC_SITE = https://files.pythonhosted.org/packages/24/9f/a9ae1e6efa11992dba2c4727d94602bd2f6ee5f0dedc29ee2d5d572c20f7 +PYTHON_PATHSPEC_LICENSE = MPL-2.0 +PYTHON_PATHSPEC_LICENSE_FILES = LICENSE +PYTHON_PATHSPEC_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:45 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:45 -0600 Subject: [Buildroot] [PATCH 4/7] package/python-hatchling: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-4-james.hilliard1@gmail.com> This is a new pep517 based build backend. Signed-off-by: James Hilliard --- DEVELOPERS | 1 + .../python-hatchling/python-hatchling.hash | 5 +++++ package/python-hatchling/python-hatchling.mk | 19 +++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 package/python-hatchling/python-hatchling.hash create mode 100644 package/python-hatchling/python-hatchling.mk diff --git a/DEVELOPERS b/DEVELOPERS index 48d2193db6..9e2e7a2b87 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1383,6 +1383,7 @@ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ +F: package/python-hatchling/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatchling/python-hatchling.hash b/package/python-hatchling/python-hatchling.hash new file mode 100644 index 0000000000..41d7be977e --- /dev/null +++ b/package/python-hatchling/python-hatchling.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatchling/json +md5 e06cc65ac646f9b01df5406aa1f97022 hatchling-1.11.1.tar.gz +sha256 9f84361f70cf3a7ab9543b0c3ecc64211ed2ba8a606a71eb6a473c1c9b08e1d0 hatchling-1.11.1.tar.gz +# Locally computed sha256 checksums +sha256 7f143a8127ad4873862d70854b5bd2abd0085aa73e64fd2b08704a3b9f5c07fc LICENSE.txt diff --git a/package/python-hatchling/python-hatchling.mk b/package/python-hatchling/python-hatchling.mk new file mode 100644 index 0000000000..13155a20a4 --- /dev/null +++ b/package/python-hatchling/python-hatchling.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# python-hatchling +# +################################################################################ + +PYTHON_HATCHLING_VERSION = 1.11.1 +PYTHON_HATCHLING_SOURCE = hatchling-$(PYTHON_HATCHLING_VERSION).tar.gz +PYTHON_HATCHLING_SITE = https://files.pythonhosted.org/packages/24/20/3e21d2bc57229822ac9fb9b314d7892c16f829f34a0eb247c55fc11e09a8 +PYTHON_HATCHLING_LICENSE = MIT +PYTHON_HATCHLING_LICENSE_FILES = LICENSE.txt +PYTHON_HATCHLING_SETUP_TYPE = pep517 +HOST_PYTHON_HATCHLING_DEPENDENCIES = \ + host-python-editables \ + host-python-packaging \ + host-python-pathspec \ + host-python-pluggy + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:46 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:46 -0600 Subject: [Buildroot] [PATCH 5/7] package/python-hatch-fancy-pypi-readme: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-5-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + .../python-hatch-fancy-pypi-readme.hash | 5 +++++ .../python-hatch-fancy-pypi-readme.mk | 15 +++++++++++++++ 3 files changed, 21 insertions(+) create mode 100644 package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash create mode 100644 package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk diff --git a/DEVELOPERS b/DEVELOPERS index 9e2e7a2b87..df61582cd4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1384,6 +1384,7 @@ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ +F: package/python-hatch-fancy-pypi-readme/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash new file mode 100644 index 0000000000..1b287072b7 --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_fancy_pypi_readme/json +md5 588776ea8e3608714d4cbba16dffa92b hatch_fancy_pypi_readme-22.8.0.tar.gz +sha256 da91282ca09601c18aded8e378daf8b578c70214866f0971156ee9bb9ce6c26a hatch_fancy_pypi_readme-22.8.0.tar.gz +# Locally computed sha256 checksums +sha256 e69ea57f96e599e617f61af3e85bf326b87e833994709fb5e5908a81197730a2 LICENSE.txt diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk new file mode 100644 index 0000000000..f28721181a --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk @@ -0,0 +1,15 @@ +################################################################################ +# +# python-hatch-fancy-pypi-readme +# +################################################################################ + +PYTHON_HATCH_FANCY_PYPI_README_VERSION = 22.8.0 +PYTHON_HATCH_FANCY_PYPI_README_SOURCE = hatch_fancy_pypi_readme-$(PYTHON_HATCH_FANCY_PYPI_README_VERSION).tar.gz +PYTHON_HATCH_FANCY_PYPI_README_SITE = https://files.pythonhosted.org/packages/4e/ab/9b48589d6e3a2f72cc1e8f5221c28ff28fcdf116dbbd6e9beb946054212d +PYTHON_HATCH_FANCY_PYPI_README_LICENSE = MIT +PYTHON_HATCH_FANCY_PYPI_README_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_FANCY_PYPI_README_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_FANCY_PYPI_README_DEPENDENCIES = host-python-hatchling + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:47 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:47 -0600 Subject: [Buildroot] [PATCH 6/7] package/python-hatch-vcs: new package In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-6-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- DEVELOPERS | 1 + package/python-hatch-vcs/python-hatch-vcs.hash | 5 +++++ package/python-hatch-vcs/python-hatch-vcs.mk | 17 +++++++++++++++++ 3 files changed, 23 insertions(+) create mode 100644 package/python-hatch-vcs/python-hatch-vcs.hash create mode 100644 package/python-hatch-vcs/python-hatch-vcs.mk diff --git a/DEVELOPERS b/DEVELOPERS index df61582cd4..c917cbe12a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1385,6 +1385,7 @@ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ F: package/python-hatch-fancy-pypi-readme/ +F: package/python-hatch-vcs/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-vcs/python-hatch-vcs.hash b/package/python-hatch-vcs/python-hatch-vcs.hash new file mode 100644 index 0000000000..e57eeddd2f --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_vcs/json +md5 e56b6d0c05cfb9b59d493c67f94d6e48 hatch_vcs-0.2.0.tar.gz +sha256 9913d733b34eec9bb0345d0626ca32165a4ad2de15d1ce643c36d09ca908abff hatch_vcs-0.2.0.tar.gz +# Locally computed sha256 checksums +sha256 117aa5006d8475562f04442ab06dd2a4c501af3a77255eae0deef1f0c2499a1a LICENSE.txt diff --git a/package/python-hatch-vcs/python-hatch-vcs.mk b/package/python-hatch-vcs/python-hatch-vcs.mk new file mode 100644 index 0000000000..55c6461751 --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.mk @@ -0,0 +1,17 @@ +################################################################################ +# +# python-hatch-vcs +# +################################################################################ + +PYTHON_HATCH_VCS_VERSION = 0.2.0 +PYTHON_HATCH_VCS_SOURCE = hatch_vcs-$(PYTHON_HATCH_VCS_VERSION).tar.gz +PYTHON_HATCH_VCS_SITE = https://files.pythonhosted.org/packages/ac/13/b3d83564c0cc0f1d45b4ea2a78b87b383a8165797613fedf11f1a7e49b48 +PYTHON_HATCH_VCS_LICENSE = MIT +PYTHON_HATCH_VCS_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_VCS_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_VCS_DEPENDENCIES = \ + host-python-hatchling \ + host-python-setuptools-scm + +$(eval $(host-python-package)) -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 21:53:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 15:53:48 -0600 Subject: [Buildroot] [PATCH 7/7] package/python-jsonschema: bump to version 4.16.0 In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221019215348.3262192-7-james.hilliard1@gmail.com> Migrate to new pep517 based hatchling build system. Signed-off-by: James Hilliard --- package/python-jsonschema/python-jsonschema.hash | 4 ++-- package/python-jsonschema/python-jsonschema.mk | 10 +++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/package/python-jsonschema/python-jsonschema.hash b/package/python-jsonschema/python-jsonschema.hash index a2766f78cc..d4c2759811 100644 --- a/package/python-jsonschema/python-jsonschema.hash +++ b/package/python-jsonschema/python-jsonschema.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/jsonschema/json -md5 c3f7a29c187bf1d038c66a5d5763eab1 jsonschema-4.5.1.tar.gz -sha256 7c6d882619340c3347a1bf7315e147e6d3dae439033ae6383d6acb908c101dfc jsonschema-4.5.1.tar.gz +md5 3bc1f63a74fc61bf2847f22cadb0dfff jsonschema-4.16.0.tar.gz +sha256 165059f076eff6971bae5b742fc029a7b4ef3f9bcf04c14e4776a7605de14b23 jsonschema-4.16.0.tar.gz # Locally computed sha256 checksums sha256 4f92a015a13c4d1a040bef018aa13430b4f1bc73b41b16bb846c346766de7439 COPYING sha256 837402bd25fad9b704265801ca3f92566a98157c1f9a7acd6f446299ba1c305a json/LICENSE diff --git a/package/python-jsonschema/python-jsonschema.mk b/package/python-jsonschema/python-jsonschema.mk index 013a5c1293..68a25aed58 100644 --- a/package/python-jsonschema/python-jsonschema.mk +++ b/package/python-jsonschema/python-jsonschema.mk @@ -4,11 +4,15 @@ # ################################################################################ -PYTHON_JSONSCHEMA_VERSION = 4.5.1 +PYTHON_JSONSCHEMA_VERSION = 4.16.0 PYTHON_JSONSCHEMA_SOURCE = jsonschema-$(PYTHON_JSONSCHEMA_VERSION).tar.gz -PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/9e/62/93a54db0e44c4de57868a7d638d7a8abce113c8bc43a20b10b1109b2a517 -PYTHON_JSONSCHEMA_SETUP_TYPE = setuptools +PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/cf/54/8923ba38b5145f2359d57e5516715392491d674c83f446cd4cd133eeb4d6 +PYTHON_JSONSCHEMA_SETUP_TYPE = pep517 PYTHON_JSONSCHEMA_LICENSE = MIT PYTHON_JSONSCHEMA_LICENSE_FILES = COPYING json/LICENSE +PYTHON_JSONSCHEMA_DEPENDENCIES = \ + host-python-hatchling \ + host-python-hatch-fancy-pypi-readme \ + host-python-hatch-vcs $(eval $(python-package)) -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:39 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:39 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile Message-ID: <20221019215741.2854410-1-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/docker/Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile index f54c31b54a..fd1527b1f9 100644 --- a/support/docker/Dockerfile +++ b/support/docker/Dockerfile @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ mercurial \ openssh-server \ python3 \ + python3-pip \ python3-flake8 \ - python3-nose2 \ python3-pexpect \ python3-pytest \ qemu-system-arm \ @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ apt-get -y autoremove && \ apt-get -y clean +# To be able to run tests in parallel +RUN pip install pytest-parallel + # To be able to generate a toolchain with locales, enable one UTF-8 locale RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ /usr/sbin/locale-gen -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:41 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:41 +0200 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221019215741.2854410-3-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/scripts/generate-gitlab-ci-yml | 2 -- 1 file changed, 2 deletions(-) diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml index aa43aac019..bb4dcbbb22 100755 --- a/support/scripts/generate-gitlab-ci-yml +++ b/support/scripts/generate-gitlab-ci-yml @@ -31,7 +31,6 @@ gen_tests() { defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort) ) @@ -80,7 +79,6 @@ gen_tests() { ;; (*-tests.*) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort \ | grep "^${CI_COMMIT_REF_NAME##*-}") ) -- 2.34.1 From oguz.ozhan at mind.be Wed Oct 19 21:57:40 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Wed, 19 Oct 2022 23:57:40 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221019215741.2854410-2-oguz.ozhan@mind.be> Signed-off-by: Oguz Ozhan --- support/testing/conf/unittest.cfg | 3 -- support/testing/run-tests | 28 ++++++++++------- support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ 3 files changed, 36 insertions(+), 35 deletions(-) diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg index 4f516fb80a..0dfffcfbda 100644 --- a/support/testing/conf/unittest.cfg +++ b/support/testing/conf/unittest.cfg @@ -1,5 +1,2 @@ -[unittest] -plugins = nose2.plugins.mp - [multiprocess] always-on = True diff --git a/support/testing/run-tests b/support/testing/run-tests index bf40019362..f887bc6715 100755 --- a/support/testing/run-tests +++ b/support/testing/run-tests @@ -4,10 +4,16 @@ import multiprocessing import os import sys -import nose2 +import pytest from infra.basetest import BRConfigTest +class PyTestCollector: + def __init__(self): + self.collected = [] + def pytest_collection_modifyitems(self, items): + for item in items: + self.collected.append(item.nodeid) def main(): parser = argparse.ArgumentParser(description='Run Buildroot tests') @@ -42,12 +48,10 @@ def main(): BRConfigTest.logtofile = False if args.list: - print("List of tests") - nose2.discover(argv=[script_path, - "-s", test_dir, - "-v", - "--collect-only"], - plugins=["nose2.plugins.collect"]) + collect_plugin = PyTestCollector() + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) + for nodeid in collect_plugin.collected: + print(nodeid) return 0 if args.download is None: @@ -106,15 +110,15 @@ def main(): return 1 BRConfigTest.timeout_multiplier = args.timeout_multiplier - nose2_args = ["-v", - "-N", str(args.testcases), - "-s", test_dir, + pytest_args = ["--workers", str(args.testcases), + "--rootdir", test_dir, "-c", os.path.join(test_dir, "conf/unittest.cfg")] if args.testname: - nose2_args += args.testname + pytest_args += args.testname + + pytest.main(pytest_args) - nose2.discover(argv=nose2_args) if __name__ == "__main__": diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py index 692291267e..d2390cccf1 100644 --- a/support/testing/tests/fs/test_iso9660.py +++ b/support/testing/tests/fs/test_iso9660.py @@ -25,7 +25,7 @@ BASIC_CONFIG = \ """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): img = os.path.join(builddir, "images", "rootfs.iso9660") if efi: efi_img = os.path.join(builddir, "images", "OVMF.fd") @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): return exit_code -def test_touch_file(emulator): +def do_test_touch_file(emulator): _, exit_code = emulator.run("touch test") return exit_code @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) self.emulator.stop() - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) -- 2.34.1 From moritz at h6t.eu Wed Oct 19 22:00:17 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:17 +0200 Subject: [Buildroot] [PATCH 0/2] Improve handling of debug builds in cargo packages Message-ID: <20221019220019.8418-1-moritz@h6t.eu> From: Moritz Bitsch Cargo supports two build modes: debug and release, where debug is the default. In debug build mode most optimizations are disabled, resulting in slow runtime. It is also possible to instruct rustc to generate debug symbols independent of build mode, using RUSTFLAGS. Moritz Bitsch (2): package/pkg-cargo.mk: fix handling of runtime debug builds package/pkg-cargo.mk: generate debug symbols when BR2_ENABLE_DEBUG is set package/pkg-cargo.mk | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) -- 2.37.3 From moritz at h6t.eu Wed Oct 19 22:00:18 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:18 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <20221019220019.8418-1-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> Message-ID: <20221019220019.8418-2-moritz@h6t.eu> From: Moritz Bitsch The cargo --release flag is used to create optimized builds, not supplying --release has major performance implications. Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..e0556252fa 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS $$($(2)_CARGO_ENV) \ cargo build \ --offline \ - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ --manifest-path Cargo.toml \ --locked \ $$($(2)_CARGO_BUILD_OPTS) -- 2.37.3 From moritz at h6t.eu Wed Oct 19 22:00:19 2022 From: moritz at h6t.eu (moritz at h6t.eu) Date: Thu, 20 Oct 2022 00:00:19 +0200 Subject: [Buildroot] [PATCH 2/2] package/pkg-cargo.mk: generate debug symbols when BR2_ENABLE_DEBUG is set In-Reply-To: <20221019220019.8418-1-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> Message-ID: <20221019220019.8418-3-moritz@h6t.eu> From: Moritz Bitsch Adding -g to RUSTFLAGS enables debug symbol generation in rustc Signed-off-by: Moritz Bitsch --- package/pkg-cargo.mk | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index e0556252fa..7ce7867f67 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -51,9 +51,15 @@ PKG_CARGO_ENV = \ # and should be removed when fixed upstream # ifeq ($(NORMALIZED_ARCH),arm) - PKG_CARGO_ENV += RUSTFLAGS="-Clink-arg=-Wl,--allow-multiple-definition" + PKG_CARGO_RUSTFLAGS += -Clink-arg=-Wl,--allow-multiple-definition endif +ifeq ($(BR2_ENABLE_DEBUG),y) + PKG_CARGO_RUSTFLAGS += -g +endif + +PKG_CARGO_ENV += RUSTFLAGS=$(subst $(space),$(comma),$(strip $(PKG_CARGO_RUSTFLAGS))) + HOST_PKG_CARGO_ENV = \ $(PKG_COMMON_CARGO_ENV) -- 2.37.3 From nhed+buildroot at starry.com Wed Oct 19 22:11:52 2022 From: nhed+buildroot at starry.com (Nevo Hed) Date: Wed, 19 Oct 2022 18:11:52 -0400 Subject: [Buildroot] [PATCH] core: Use of percent_defconfig seems to impact performance In-Reply-To: <20221019182521.GF3666@scaer> References: <20221019175151.1030079-1-nhed+buildroot@starry.com> <20221019182521.GF3666@scaer> Message-ID: Yann, All On Wed, Oct 19, 2022 at 2:25 PM Yann E. MORIN wrote: > > Nevo, All, > > On 2022-10-19 13:51 -0400, Nevo Hed spake thusly: > > Noticed a significant slowdown with rise of number of external trees > > in our env. This slowdown seemed to be related to invocations if the > > percent_defconfig function (GNU Make 4.3). > > We already have a pending patch to address this issue: > https://patchwork.ozlabs.org/project/buildroot/patch/20220920194645.670432-1-yann.morin.1998 at free.fr/ Sorry, I forgot to look in patchwork and just saw that it is still not addressed in master (my actual project uses the 2022.02 tag) > > This patch makes %_defconfig a single rule which combines uses the > > first return of a wildcard expression. > > I can certainly see that this looks a bit simpler than my proposal. > > Hoever, I am not too fond of it, because it defers the test that the > defconfig exists into the shell rather than the Makefile. I don't know, > maybe it is in fact better because we can print a more user-friendly > error message... Agreed on that front - I was even toying using `vpath` but it didn't pan out (probably because I have not used that feature in a long time). > > Timing (seconds) of `make pc_x86_64_bios_defconfig` with 1-8 external > > trees: > > > > #Trees Before After > > 1 0.38 0.37 > > 2 0.32 0.31 > > 3 0.31 0.33 > > 4 0.36 0.32 > > 5 0.45 0.35 > > 6 1.26 0.36 > > 7 9.10 0.36 > > 8 85.93 0.42 > > Weird. For me, starting at 6 external trees, the time to completion > directly exploded above the hour. > > One interesting point, though is that the duration does not seem to be > much impacted by the number of br?external trees. Could you test with up > to 1000 trees, like I did? For 1000, I got 15.68 - so the same neighborhood as yours. Maybe deltas in the 6-7 trees might be hardware related (cache sizes, FS types etc - strace-ing the make in the many-trees case is a wild spam storm) Addendum: I originally prepared a cover letter but am not a frequent user of git-send-email and it didn't send. I'll paste it below - please note the option of some implicit rule resets. =========================================================== >From 6a2fa74edf5bd3b254fc7c49ebe465280e8e8902 Mon Sep 17 00:00:00 2001 From: Nevo Hed Date: Wed, 19 Oct 2022 13:32:14 -0400 Subject: [PATCH 0/1] core: Use of percent_defconfig seems to impact performance Noticing serious perforate issues on `make X_defconfig` with growth of number of external trees. At 7 trees it is somewhat tolerable but at 8 trees we have seen it take 80-110 seconds. Numbers for before and after the change in commit itself. I do not know for sure what the underlying issue is but looking at some `strace` and `make -d` output it feels like an implosion of implicit rules being evaluated. Adding the resets as suggested here https://lists.gnu.org/archive/html/help-make/2002-11/msg00062.html seems to help a lot but not as much as the attached patch. --8<------------ %: %,v %: RCS/%,v %: RCS/% %: s.% %: SCCS/s.% --8<------------ Inlined below a script to repro this issue, not sure if this functionality should be integrated anywhere or just left in the mailing list. By default the script runs the scenario from 1 tree to 8 trees. Running with param (1-10) will allow a single run with that many trees. --8<------------ #!/usr/bin/env bash declare treedirs=() declare -r cfg="pc_x86_64_bios_defconfig" function setup_dir { for tree in tree{1..10}; do local treedir="defconf_test/${tree}" mkdir -p "${treedir}/configs" touch "${treedir}/Config.in" touch "${treedir}/external.mk" echo -e "name: ${tree^^}\ndesc: ${tree^}" > "${treedir}/external.desc" cp "./configs/${cfg}" "${treedir}/configs/${tree}_${cfg}" treedirs+=( "${treedir}" ) done } function run_one { local count="${1}" local br2_external=$(IFS=':'; echo "${treedirs[*]:0:count}") echo "Defconfig with ${count} trees (BR2_EXTERNAL=\"${br2_external}\")" /usr/bin/time -f "${count},%e" /bin/make BR2_EXTERNAL="${br2_external}" "${cfg}" } # Main setup_dir if [ -n "${1}" ]; then run_one "${1}" else for i in {1..8}; do run_one $i done fi --8<------------ From james.hilliard1 at gmail.com Wed Oct 19 22:12:10 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 18:12:10 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <20221019220019.8418-2-moritz@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> Message-ID: On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot wrote: > > From: Moritz Bitsch > > The cargo --release flag is used to create optimized builds, not supplying > --release has major performance implications. Is there an env variable we can use to set this instead? Some packages use cargo without the cargo infrastructure, for example we have a number of pyo3(https://pyo3.rs/) based packages that use the cargo env but not the cargo build commands from here. > > Signed-off-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..e0556252fa 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > $$($(2)_CARGO_ENV) \ > cargo build \ > --offline \ > - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > --manifest-path Cargo.toml \ > --locked \ > $$($(2)_CARGO_BUILD_OPTS) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mmayer at broadcom.com Wed Oct 19 23:34:14 2022 From: mmayer at broadcom.com (Markus Mayer) Date: Wed, 19 Oct 2022 16:34:14 -0700 Subject: [Buildroot] [PATCH] package/rsync: force HAVE_C99_VSNPRINTF to "yes" Message-ID: <20221019233414.868133-1-mmayer@broadcom.com> We know the system will have a modern-enough C library that implements the required snprintf() functionality. Since the configure stage can't detect the system's capabilities (because it is cross-compiling), let's hard-code the decision. As a result, rsync won't be linking in its own copy of snprintf(). Signed-off-by: Markus Mayer --- package/rsync/rsync.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b9819..0d311aa1673c 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -11,6 +11,9 @@ RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba RSYNC_SELINUX_MODULES = rsync RSYNC_DEPENDENCIES = zlib popt +# We know that our C library is modern enough for C99 vsnprintf(). Since +# configure can't detect this, we tell configure that vsnprintf() is safe. +RSYNC_CONF_ENV = rsync_cv_HAVE_C99_VSNPRINTF=yes RSYNC_CONF_OPTS = \ --with-included-zlib=no \ --with-included-popt=no \ -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 19 23:36:22 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 19:36:22 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> References: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti wrote: > > Fixes: > http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ Hmm, this looks like a bug in the libnss makefile, what was the failure seen with make 4.3 here: https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > Signed-off-by: Giulio Benetti > --- > package/libnss/libnss.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > index 041b2cfc56..a613006f70 100644 > --- a/package/libnss/libnss.mk > +++ b/package/libnss/libnss.mk > @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > LIBNSS_CPE_ID_VENDOR = mozilla > LIBNSS_CPE_ID_PRODUCT = nss > > -# Don't parallel build if make version = 4.3 > -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > +# Don't parallel build if make version = 4.3 or 4.4 > +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > LIBNSS_MAKE = $(MAKE1) > else > LIBNSS_MAKE = $(MAKE) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Wed Oct 19 23:46:55 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 17:46:55 -0600 Subject: [Buildroot] [PATCH 1/1] package/localedef: add MAKEFLAGS fix to localedef as well Message-ID: <20221019234655.1097686-1-james.hilliard1@gmail.com> This was fixed in glibc but also needs to be fixed in localedef. Signed-off-by: James Hilliard --- ...03-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch | 1 + 1 file changed, 1 insertion(+) create mode 120000 package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch diff --git a/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch b/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch new file mode 120000 index 0000000000..1e41bc4e12 --- /dev/null +++ b/package/localedef/0003-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch @@ -0,0 +1 @@ +../glibc/0002-Makerules-fix-MAKEFLAGS-assignment-for-upcoming-make.patch \ No newline at end of file -- 2.34.1 From james.hilliard1 at gmail.com Thu Oct 20 00:23:08 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 19 Oct 2022 20:23:08 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: <20221019195519.28536-1-giulio.benetti@benettiengineering.com> Message-ID: On Wed, Oct 19, 2022 at 7:36 PM James Hilliard wrote: > > On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti > wrote: > > > > Fixes: > > http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ > > Hmm, this looks like a bug in the libnss makefile, what was the failure > seen with make 4.3 here: > https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ This patch also does not fix the build with make 4.4(make from master branch) from my testing. Even without shuffle mode enabled the build appears to always fail. > > > > > Signed-off-by: Giulio Benetti > > --- > > package/libnss/libnss.mk | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > > index 041b2cfc56..a613006f70 100644 > > --- a/package/libnss/libnss.mk > > +++ b/package/libnss/libnss.mk > > @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > > LIBNSS_CPE_ID_VENDOR = mozilla > > LIBNSS_CPE_ID_PRODUCT = nss > > > > -# Don't parallel build if make version = 4.3 > > -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > > +# Don't parallel build if make version = 4.3 or 4.4 > > +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > > LIBNSS_MAKE = $(MAKE1) > > else > > LIBNSS_MAKE = $(MAKE) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Thu Oct 20 05:41:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 20 Oct 2022 05:41:57 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-19 Message-ID: <20221020054203.9477F60C21@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-19 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 2 | 0 | 4 | 2022.08.x | 8 | 11 | 0 | 19 | master | 152 | 358 | 12 | 522 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 23 crun-1.5 | 17 autofs-5.1.8 | 15 glibc-2.36-44-g2628500f5dff... | 15 ocf-linux-20171122 | 14 brltty | 12 host-sentry-cli-1.59.0 | 12 systemd-250.4 | 12 sysvinit-2.99 | 11 host-f2fs-tools-1.15.0 | 10 xz-5.2.7 | 10 linux-6.0.1 | 9 igd2-for-linux-2.1 | 8 batman-adv-2021.4 | 6 btrfs-progs-5.16.2 | 6 casync-4ad9bcb94bc83ff36cfc... | 6 gobject-introspection-1.72.0 | 6 host-binutils-2.38 | 6 linux-pam-1.5.2 | 6 file-5.41 | 5 gerbera-1.10.0 | 5 host-go-1.19.1 | 5 libgpg-error-1.45 | 5 elfutils-0.186 | 4 host-gcc-final-11.3.0 | 4 libcap-ng-0.8.3 | 4 libglib2-2.72.3 | 4 unknown | 4 android-tools-4.2.2+git2013... | 3 dahdi-linux-5c840cf43838e06... | 3 dash-0.5.11.5 | 3 dmalloc-5.6.5 | 3 efivar-38 | 3 gsl-2.6 | 3 host-binutils-2.39 | 3 host-rust-1.64.0 | 3 host-spirv-llvm-translator-... | 3 libarchive-3.6.1 | 3 linux-5.10.145-cip17 | 3 linux-5.10.145-cip17-rt7 | 3 linuxptp-3.1.1 | 3 lxc-4.0.12 | 3 mesa3d-22.1.6 | 3 perl-5.34.1 | 3 fdk-aac-2.0.2 | 2 gensio-2.5.5 | 2 gmp-6.2.1 | 2 host-pahole-73383b3a39afe86... | 2 libgcrypt-1.10.1 | 2 libqb-2.0.6 | 2 mtd-2.1.3 | 2 musl-1.2.3 | 2 ntp-4.2.8p15 | 2 openpgm-5-3-128 | 2 sdl-1.2.15 | 2 skalibs-2.10.0.3 | 2 xenomai-3.0.10 | 2 assimp-5.2.5 | 1 bat-0.19.0 | 1 botan-2.19.2 | 1 brltty-6.5 | 1 cairo-1.16.0 | 1 check-0.15.2 | 1 dc3dd-7.2.641 | 1 edk2-edk2-stable202102 | 1 exempi-2.6.1 | 1 ffmpeg-4.4.3 | 1 frr-8.3.1 | 1 fs/axfs/axfs.mk:32: /home/a... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 host-binutils-2.37 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-12.2.0 | 1 host-gcc-initial-10.4.0 | 1 hostapd-2.10 | 1 igh-ethercat-1.5.2 | 1 imx-usb-loader-30b43d69770c... | 1 kmod-29 | 1 libglvnd-1.4.0 | 1 libsepol-3.3 | 1 liquid-dsp-1.4.0 | 1 lttng-babeltrace-1.5.7 | 1 numactl-2.0.14 | 1 opencv3-3.4.17 | 1 php-8.1.11 | 1 proftpd-1.3.6e | 1 protobuf-21.6 | 1 python-cryptography-38.0.1 | 1 python-pyqt5-5.15.6 | 1 python-ujson-5.2.0 | 1 qt5webkit-5.212.0-alpha4 | 1 quickjs-2021-03-27 | 1 tcf-agent-1.7.0 | 1 tinymembench-0.4 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 xvisor-0.3.1 | 1 xxhash-0.8.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/4a11b41ac097454ced5bfed4b93c2cf228b818eb | powerpc64 | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/fbaf2814553ac6844b1b12043cef4a8af74741a2 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/e054f275e07698632edb5ef48af7091a685812bb | mips | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/92e113771b5a1b80fe78a07c80a447021e586e0c | ORPH armeb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/37bd95f169551f49a46c3dc445a3504bfbed2b9f | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/d3faeb2dd796ef05b3efca52c806dbeccefde046 | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3d2819a5e9ffc1857f8d9fff0e3615d39d1c65e7 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ff0d22c056159ea51b0fb868be809dec4cfef30f | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2adf4c5061422b8758f9b2f65416a9e0a3f95e53 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/9f8e8c7f971714f00aee960a962fe3e72c65ee3f | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/48311a912039de443aea0b2d67dfb0a8b5abff04 | nios2 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/412781a4c6aabbca0441d52f049ea4acd33dbacb | i686 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5fcf404f270451c11aecf72261e47ca56c8de708 | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/36ed9293ef1d4414c80047e14562766dd4775284 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/765d90b6736e5724d387fc530f4dc76c982f7bb8 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e8e252cf5d9cb3e01ad93feab5a09ec53b3e9c85 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/62d6d641934eebb4098ef1c50912f06af552c2f4 | sparc64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/cce473d371fde10d4de3bf77e12bee6972889f6d | riscv64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f32f595bba34e8d4023998d5ec91eaf40f342794 | i586 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/ae07a66c7835d1885266cd38a69ba58a5c09d68f | x86_64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/421550c768a4492e01f6c500990f07ccf5490ab9 | arceb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/fa85017d4f0b8b94c155c56d94b4bfa742741ad5 | mips | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2881ecfa1bca5cdc34b3b076cfda2ac36a02cce1 | or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/113c71333b7fb94fefc7112747b73b0c92271825 | xtensa | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/33f70224be5e1a93bdff8fff709dfc927fd775f3 | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b21441e67e2d7d83e9c7b173bb11bbe97ba057fe | mips | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/318956ea8e52e1399553590d8f078c3f79aea824 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/6f0b660645d3e7f4fdd51cb1f90d8f465590419c | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/dfeac5e875a488c8fa22b24aca307d5500774a56 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/13215721fab687b04dbc6702537ebc39f9594805 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/549f38bf8be08161e64f699897d28c3724f1dcdf | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/ee53045533a251b05bdce7afb12c48844e462b11 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/782c47f8fe46ee06e38b198563bc498987b2bade | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/3d01e60acc09b23b779ae33a4049c5cb92b5112d | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d21a867dde6818af074c605c1378df60c6174cba | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/bd1f86ada702f981fcf037fbda8bc4f834184abd | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/8190d672d5a5e269c8c7446c464e9c28c5935503 | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/769889a2d3854253af28e5a185117bb29d42731d | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/2ccce94d44a01ec1eb9b9204b681d6583b96da39 | powerpc64le | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/1e15d17c24934d3b15188f3dbfd168ebc5238f7a | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/dd255297533964616abf4b63a48e3fbacae21681 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c5f43bbc69c8d5ec4a8e03f3df734c49be5a34ba | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/662058374cdd5ff8c0f68400bce1675eb0583bdb | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f0c923a9378090891bd6a712b6f9cb245bb3f16c | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/de6bec1f85103725bc2227eb19c62132e98aafa3 | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c9e713af5f4b478108cb19ad050c2c5823796f12 | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/f7760b2fe8fbadf08cf57924fbbfe42f58b785fb | aarch64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/86c927fb296b7e7a5d63c28124229c85a6d35dd3 | s390x | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2ec48e270cf1feef4631129bf10c185f7f23a153 | microblazeel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/2a342b83e74c286c123b9dc5155ee1fb578719a6 | i686 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/79c0b77870694fcc0da5cd34e525dd2df2267453 | x86_64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/45b25ad1b6ea71255b8201a7a931849c56147a81 | aarch64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/62694be0ba16d26bdd1b06e9178ad04fb084325d | powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/f1988aed0b9cdb8357c1da7b8b9e96a9560e6c0a | ORPH x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4e9158a5cf2e19de0f825ff46b5fa518d8111d71 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/83b94d14883ffa8d4736af40df56b0cb18704256 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/78d500c3c64aac8a6316b3ae2ffd9ff06587d9fd | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e7d5295814745553a36ecc883d0f34b4a01c51bd | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3cb31c04e5566f6f2bc944b86b5513e2d0b88098 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e4e8b469554e573463ed37b76a1de81d2f74098b | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/05bf95901ef9478b83a10b88e0ab23de4247ea6c | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5e0a55071c2fe4f76aa836c66c3b78f63a91a568 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1786b321e1f0578198938f56bab02f67f09422e1 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/bed74dc968b9de8ab3a067b901fb45ee37cad634 | nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e87d56d3095d33cc55d96190a1e347a09a6b9b6e | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/896fc1a4753bb66b35da45070038b772cc34382b | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/eed90ebbb5d02e2d604dd9367b340d1afab2f4a0 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a1c31054cd684f440850b84035c0e63168761b16 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1daa77e95bee8b58345bff3eef594a62b7825db7 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9f621cbe2d0c0b523675ad6373abda7be042df09 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/41108fe5135aac33acad80a6ff6a14fd9a5c78b5 | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/6aa9404bb38813f9e6dc81ec1670156ebdda840c | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/17474acdd9c57de7bff5996b525cfbd05c621eab | powerpc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/983db8350ee015af9268cd6b5069633f97711519 | powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/18b40d13a2b085560c6f3b74fb1d16ded972bfd5 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/e317e562158bbf2fa1f81408dc3bc11737e9d6b8 | ORPH mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/44dbf5da89b0d6e89782ea34a393462b1a2e02af | ORPH or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/75551f61ddb47b3af5f71344dc7d887aee2538e2 | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/739ed97487b531c1ee8237479a4d3c99cd570550 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/110a79954de26ba6f7804c3c8b77995a4d3d78ec | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/c3f91d57612510dc740e347c8a085b6b306d528c | ORPH aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/671f30a2eb0d4a1dcf001308a2f0c1fa98325ef0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/0d3aadfd013c0b13c92390837861d1cc14b62c87 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/55d584ba7a435abdc5f728282815c88de83b6be0 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d1ff546372b268f035e7cf6b0bd3550735d28238 | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/62753da2956ab1c636029572511dc0b1ec62bf2e | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/4f4f58e6e4d0fe51d1a884d2310e1b498c1884f6 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/073dd09a2880f4272c78bfb25e57ab1cbad7e072 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/954384bc1586dedaf5aee4fd2b8c705a17259822 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/3d6ba6a133b68c117b9dc410a5e20005d4ebb59d | mips64el | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/1bdddb2e1856719234b0d1b6e503c4d78995eb3d | powerpc | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/cfebec63f96ae482ea2229f43d114d9917353941 | arc | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/30f62594d9ddb08804096840b51af457d2dcefd0 | armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/21f180fd5375724a3ff16ed5e53c33713e8578fc | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/0675dc14089e511eab207e3199d00a57ea5c6467 | ORPH xtensa | file-5.41 | NOK | http://autobuild.buildroot.net/results/900f497dafc73eda2e435cb879b45610fcc71ad8 | ORPH mips64el | file-5.41 | NOK | http://autobuild.buildroot.net/results/2dbb592db1b48d96d073349578214e6312a955a6 | ORPH x86_64 | file-5.41 | NOK | http://autobuild.buildroot.net/results/5da673c1f5c3e7eb72afeca622534e4b47dbfcb7 | ORPH mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/5e1644ae3918a38b7c470c435aa24b8be492b812 | mips64el | fs/axfs/axfs.mk:32: /home/a... | NOK | http://autobuild.buildroot.net/results/a7e3a874e1b84f61e6f4700aba385bfff6f93e6b | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/d7d8871d1e94a18f5f99e0650d3e1ae348262fb3 | powerpc64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/14b96bce717c4e265343c038140c575ada9db58c | microblaze | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/748c863915fc60ad1fa1a77b3b89b3fc3959888c | powerpc64 | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/357987b6d31b14648f74d08443abb5819616fb33 | arceb | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/b666fa63795e4649429a24c92d445c409496a419 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/fb30074418663243986f649f2db48c503a4d44bb | powerpc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/39116036672cb3dd4373b97a9838f0abf6ee8dec | arc | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/413446b13e8d36965effbc6180e01f16693af032 | powerpc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/f19604c8805e17418b3137ca5b25562102d3fcbf | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9f8bc57ec3ba6078c9001148d772d88d58384b2a | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/8fa75fa041ad3a8e0d5eab203c2ec54ff3c29b57 | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/0ac19064e46eb2d2ebccd6155fcde076c0643c02 | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5f3043c2c978e041d5b3a6fb4d5d1fcf05cf0407 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a42ff368863ffa9cd7a750acab91c13fef428b86 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/61ba7f22ea7ef8f88a69ca75dd191f076ce1e462 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5815bb03c23c910f6477e3dbfa8afc34c3a0e45e | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8543e8a1461baafd3c9e24d5493536649c12c8e6 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c6d2604467a492da5964a772bfb368bbde1baedd | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1a6592a500021e118792af92b193b217eb74ca06 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f11847f3d9009767601da9cb73db888cad99c7ba | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/da8ab8c68950f153165a05032fac5f4e2d4938db | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/83339736d35d4e833460df9597e9807044f846e1 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71da25323c2487142ff845d56641d9e99b03448f | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6174cba06943c6d36173a6e85add6b32358d8261 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bdbf5fdf373edbabf98ccd89de0c324c149763c8 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2765ab2c6a68abef5db3151ae1450dd88840cbbf | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5d721bc46c18b899eec4111ad67b4dcab1edf73a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c8cad096e85f7d16d4773782c6fa5a8cb4202de | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d1e2b48ee68755bb01d5f134c286c7273c54dc2c | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/2467bae7c6abbeabc7573150f794315daeb78652 | ORPH riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/b110b0c7e89589d82f72c0930d2a4de8df49db82 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/c7b0ed42ef86f94f9114ff352fe55867b13bf29e | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0eebbcd5519ccc06f167b8ed8b2af12f5487f8b9 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4f02f7e18ac2fca682cc03134c24df115bc519a3 | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e0e8fb301d61d91b609a7b79cea0a3e21d683aea | ORPH powerpc64le | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/55ff2b6832d38b8ab5947d6135ee89b14c7a603c | ORPH or1k | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/328312053808e3e144af61cea81c64af8aa6e333 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/b08c35feeaea9e28373bcd6c7871449ccc6652f2 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/95ed2eb218d12740fc3b5aaa41a47f6e455e96e2 | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/92aa845462606b5fa40e764f7c6b7438e9fe3a69 | ORPH powerpc64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bd6f3c9cf1eb4c6d1b9a2d5340928c6e61852729 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2277d43beef37a3a5beadf8647b62638c8a2a27 | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/20006cdd56a49bb5cf5f46ea1f1b0b78d8bb0145 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0abf680303125dee0dcad067f2c4888bb0b8d14b | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c7ade9d4e0f08dea1baffb9469daf9f2c6409a74 | i686 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fe3595dc36fa008d120c3118219d8059a7342117 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e9946f1a86860a367364d4b4643efca4a0753f9a | riscv64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/394ade72945f66d3c2932513e976dbc6954eb35b | microblaze | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b9eab680916103372be57b9eb6e568d5e6db8d89 | sparc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/bf083c608cafa36ea77588637ad027ea6f272575 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8a80d972453cd9adfd8c42a1fd248c97fc27cef5 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/319a832125df11e26eb432067af929e56feef132 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b587d41eaeece0de0297ea58d46d4f0d9090e40e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/aff2c9f613bca4c6c791d4fcba98f450e3c0bd2f | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c259d2cdb4d362a780068ef5e10c5aa0334a9509 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e2715bfc5dde8cf69a6e825d10ce387a061bf104 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4761230b3a77dc79afb7661edc305dff6aac1e14 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b7abc383ee6614384a6210445a31eb1e016f7247 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/43f53c5b47a09c257eca5b0506a4e346acc7dfe6 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/903d7ce02765a5703543e33037683ddaa4749835 | microblazeel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/4470a319f3286d6e834af7bcaad8f1fcf91d92b8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/0a9f4fb42700805938d180f4555450df494547b0 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b3aa3b904d3830b864ae6a74609809bcd60df66c | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/f788cf9e11ce848c00034061106db58b0a6d59b1 | riscv64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/3f8faa5357f52a79ef94ac19473be8a3873bd6f6 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/f1f7604b032e8f950b9114ce7de7da91bc285c48 | x86_64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/c3a7bd063bf9d0f6597d111ac5d45486e8ca61ff | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9ba02da2b7ab14cf6b7d761edab21cc60cfd0144 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/857fc94446363aecf96346354ca1aa2f20dc589c | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ca2a6754c224012412ca7d3d22659f69019950d6 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/33eeaf18bad628fd7017f02e961575d83a94d59b | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fa61188d35f41daf7cd9164ceafe4684fe5c08cc | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5095ff0f2d4042fbf50fa2f97b2498534282c646 | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/51643b4f0875563af1da8ad16e4235dd910c8b6f | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/3f5aa26c9d17d994dd371a4b298033900f939045 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/e39058b6823795fa16de6487e57b05586ceb2645 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/d51f3405670139a6776f12faef3e872c304b1399 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/01ba7a775400b5fa2a0293a4567d826cb8687aae | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/300c38b60b610cd9e3951f21ddef57151e52bf4a | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bdbce15e30447054494075245f5968d85f2b3d72 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0ed64f6dc430ecd67dc9b0b9b03b450ff32296c6 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9a16e31b1b49ba45fbef1a8a9b0ef6d8c3ee85db | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/900840c239b0d91edc0a95a302709399fcad5031 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9ce2372c5687d39e242f1ac1326adebcf80e5974 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87ba17dc66b50191c1f79fc5c79521e497d5db1b | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bf58ed50d9352efefecb25c2cdd904a876d4328c | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f3b634d665ccdc828dfd1a99d7cab08e65ec3c7c | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/477dbf161dee7c3cba225a86035da5cb0f2e4e96 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3576edc8a27d1ce89902dc5e70e4fb92756d7c2d | x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2320411ae15e0c27c002e92c84cedd090d22d388 | ORPH armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/6b302d32ec0d377d3c4eaa1c4c25d8a26d241803 | ORPH aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/9812b259abf4e8c0957741ddd16b9ad4bf034b4a | ORPH aarch64 | hostapd-2.10 | NOK | http://autobuild.buildroot.net/results/67f5896a90cd6b3e497f1ba8fc8eeb381ceff499 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c57d1eddd89b5c5d1b23e40130dc96197ece5e7f | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/25fd4abb66d762199624c630c4ee1c96123156e2 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7f21cc319fdb43f5393588008c8ccc48e2b41ef4 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/844dde054acdf32a316f76de318160c4e7381215 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9d20a4f9b4885d86e3733517e0a963999ddcd3ff | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/8c6c2cae3da4788f3907a928a25d7d9d1bd4044f | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/10f7f642a4202ebb7c542cb97c24e38a713f8c6e | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/32529307a19e94518cec841ffab7af35f6a784ba | mipsel | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/064b61ff692421cf1c206b54c20017c4801ac8ab | or1k | imx-usb-loader-30b43d69770c... | NOK | http://autobuild.buildroot.net/results/ca1f740d844cd8cd1c8999f1447259cb4b02d4ea | ORPH x86_64 | kmod-29 | NOK | http://autobuild.buildroot.net/results/7f4628ce3bb96505c99edfb2d04f99e92638e1cf | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/2a62c597130cf382f64cf5f4dce87fd070af152b | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cff2d2ca1156326aa9afa7bd6d943ec5efb9ec84 | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b29ff7ebbf8c12f667096eda9187d7322198990 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/36d2917455f18218648ad5a64b9a67cddeeaf510 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/7512e3f765a24572433db3ebe4aa77419b489eeb | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/14cda905550aefac1cf3199283f18b22eacdfa7a | mips64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/685bd3daed60f0439f34e200c5b2561e5fb70ad9 | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dc696d66b4db52300e4916820ee31ec5ace9dea0 | ORPH armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/89268ef3021c0f760c77ad1c4407523d56aa1771 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4fc9d1d4885c27cada2da5e643640deb6ba317ae | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/76594fcdf4d4245c4e94652d7d3692fa46ab41d4 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c5d2ed1b26a9e1bf11babc81f927120b27b81cbb | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/c2e91fd8ff80b72f524f2d8fc84a26835dcf530b | mips64 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/fe2042622141305c9b8d7e654080483140a8f9c9 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c3195b011a5e49049ef459ad262ee2002edf2fbe | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/11804108045d1b1f8b8107e1044a283b83bcc7d9 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/f395d7f718e69a4971ec5be2775fbc53a0f3590e | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4ace9ef9dd6daa4033ccde29ccb81216104c8042 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5c00a103a5b94e9683c53cf468b77817a1d7c1c9 | ORPH powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9a174459b7fa6ff5c3474251f9891e52f5f125ab | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7c0ee1ef546758a44e92284ccd7ed54ddc0dd441 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/76528c63f0e041eee314329f4ad7d7a21bd25e3c | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c738a370271b098f262e4758e600cb79ddd4e1bb | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2386227b2c59cac4ac0cc7a4f96b1d4160b0419c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4a99989d5b54428286426d2fab846b7214ec067c | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/81944839fb883301d9a89d7e0ce837044867bcc2 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/65de55706c547373c177b4f8f3b11ec72d43c388 | powerpc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c4639c944a054c6b9d4488108478d46fe912a9e | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3dea917cc4d2c064f9478d095f48bcf4c68e539f | arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/23cee4db30539cbeb2258d534ac639a179697177 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/085c4cbbcfaf2a218bd90cad377a803617cce557 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ddfd742faccc2d9a8036e0efbb1206deff38a416 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/34197473a31b52725cd50734e8bd74538c475115 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3349b1b993cd6378c7d1679026164b9c43b445f1 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/df7c3e215019154226d804e8489c50279dff8da7 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1ea2c89a3f584ee759623414944bc99bb92d8ff0 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ef2c0c71774beb5938bd0fec2fac5614380aea46 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8bffb177c665599de778be32e301f0dc0b63016f | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5bd00c22dcfea959f23406b30fb0be400619866d | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/757a6f14306badafb453cc3780fe062586c2b1e6 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/33e0c151d8ce99b5bc0ee4111ffdefa8e2dca300 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7aff30ab3d72b594117c300144faf673f8386de7 | m68k | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/832012b1dfb6d64a03e58571645700b78a533627 | mips64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/1d5af2b455faa56677261096f43ed06c7ebdeac2 | mips64el | libsepol-3.3 | NOK | http://autobuild.buildroot.net/results/e956588c5a7723ca94bc8bb72776af4f1d1b0363 | x86_64 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/207dc8976deae08cfbf0108f59d49a222bc60005 | ORPH arc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/4301733f400bd136268fa4320e905cbc7103147c | ORPH riscv32 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/402a1680c21690a653d07b92445549590211d1f4 | ORPH sh4a | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/912dc3eab87132bddd72f9a4703f6ae28f2a145a | ORPH arm | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/23ae7a94f35f4940e6893afcf3aa915d35841dc7 | ORPH aarch64_be | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3e3fdd346d5d9918684f4ff43a92ddc92eb78d5b | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/70ff43d39f88c50e937112701055e4b520fd5ed5 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7a4dd5a180323d8ae18d749d28ba2b96473ea986 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bb1cba858db7d9bd557635f4634991b2d149e59e | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d96fc8fbbb444cfd6c0ad9ca2c291f37c16e78ef | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/48bed0d207a328e58ac797aebce1c47cc747b930 | ORPH i586 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/14f65003074ccde76c9185be9e11363e95ba6e3d | ORPH sh4aeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/31a843f18832a0daf10a0c0b5077520774e72730 | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a1b9b7b5709bbadb64277e13c0b406a94f77286c | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/5a5d0ab12796038e1833212cccae6274c974bf8f | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/a57ca0f45556a05d1384e6e18d925128401f66a6 | ORPH x86_64 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/032e9a2d69f3286948755e6edf92429ae5c75688 | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b0919104f9346185d97ab998d4518c1ccaabf6be | ORPH arceb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b78c76d671cd1eb71fd6a21603d8b3f1c4f250a7 | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/c6b46073a4ec0419e2e2e9b0f5877a4ba4645118 | ORPH sh4 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/bb01a5f7faea8ac375031bf7d221c00df76c3e01 | ORPH mips | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/11b969aa97dc06ec7932a4a79f00c6721e9356b8 | aarch64_be | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/61d6835372ce12932e0215d24d237846e8b86655 | aarch64_be | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/94f3f6f798a501668944d77412ee3e98a15cf1b6 | arm | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/cb6f9192e7acc08d51cfcc6641e57e9a79a7d8c5 | mips64 | lttng-babeltrace-1.5.7 | NOK | http://autobuild.buildroot.net/results/dbd68ce26423f4ff0a56f8075664bbc8ce9b5534 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/420dff9e081be3f46c0cf971b0f1359bd4467448 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/8bbed37e1443ebc48d814ead4b15bbc1b2dac500 | arm | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b52205898dcad4ab5717a6dbe57c9d356b33518a | sh4 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/3dd22b1deba18939e8817423a541190889b1b0fe | or1k | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/76050d07a4989400d4a6cefc8b0b59c767b01450 | sparc64 | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/ff98389a47aa06e2740afd8eeb5f2ac17ee8670c | armeb | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/e60f8a11db830f77135dc9433ed15f8dc212590a | i686 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/b3ac995e7a6535eb227ff99d226eec74d943f6c5 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/29c4158361ae65738aa23e33448dcab67401213c | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/e011ef6cebadec443b2b4425ca65be04907c6c59 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/c0100d4171bed8f2546c951a808b5271d3f904a0 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/6d9f97ed138378d6338a5710cd24cc19299ad860 | ORPH or1k | numactl-2.0.14 | NOK | http://autobuild.buildroot.net/results/05a36b46fe0d9befc99714cd60a29d2affd3c271 | mips64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/9c35d0e92d9b7afe383f7c997948b722fba5de37 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/06ec0e688e4894bb213f4bb22f532ab7dd0b06f9 | ORPH powerpc64le | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/55c279534853bbd5319e003742e3865ff8663c14 | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6184133576407e91aed6a1ece107dba1ad9d07b5 | ORPH or1k | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/463e20a20ea3613580db6046f45760ce4c26785f | ORPH xtensa | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6a72a8c689a11f915e2f96ddf8165b209769b729 | ORPH x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/e392fd20e2875b60427139ce8464c5963ca55cfa | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6b8e0736416bb38f045465b47680f2666d759060 | ORPH aarch64_be | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/5b0083b2dd7ad6a2bf6f4351ecb0b6c489014f56 | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/ccbef6f5a077e89c9ddb19fa84d775bc2ddf29ae | ORPH s390x | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/cb2dffbe25ab4fa20650c0582b64e4eeb34c013c | ORPH nios2 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6e0b7a838884d1c73073966ae89f92a3a2bae5c5 | ORPH microblazeel | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/f0d2702be334c37083ac523c48c33ea56923da6e | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/b9e25f7fa363ea4d338a62f7616158a324a163f1 | ORPH riscv32 | opencv3-3.4.17 | NOK | http://autobuild.buildroot.net/results/e6b02cbb847ad0e0e75cf1aac410ef9d951ee39a | powerpc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/46b7723fce29938cdf656c011b24e11adf032d07 | arc | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/ec0f86e8666ed49ad6b91427c6e05d75dc248028 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/6bc47cb51024d3644cf03a640248a37618c47f16 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/b734d395caeec5be10a57217db196f35a55e2057 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/fd0587ef3340193d7f5d2ab2a8ff59dbe48b018f | microblaze | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/e7399ff7296ca898f7d1c5a7e8eef45af02e7afd | m68k | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/a5b7dfc739e4b28cfdae15734f4d2c10a995c260 | m68k | protobuf-21.6 | NOK | http://autobuild.buildroot.net/results/755d9df18af870d26bf398b22c6f75e525a4b9d9 | mipsel | python-cryptography-38.0.1 | NOK | http://autobuild.buildroot.net/results/c7ff8dc92f7aeb0c7f72c3279020059657500d2c | mipsel | python-pyqt5-5.15.6 | NOK | http://autobuild.buildroot.net/results/d9cac2df4e4ea06d74a1e858efec8c68c23cd81b | nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/8c8d50bfc15c6045fa459a86860a372a81bcb864 | arc | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/d4f4d23c586ed69c7ebc96ce717d0d4c6d429933 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/5b320e76528ac0b5d76c6950d9d370fc531dee3a | sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/35d9e72e4ec3ce9ddccc8bee9f372040540ccf7c | ORPH sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/f6dfea186c830c04b87466cb6e86fdf72b9fda7d | ORPH or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/cc48c402acb0cb20965dde7e36bc686bf13b8296 | or1k | skalibs-2.10.0.3 | NOK | http://autobuild.buildroot.net/results/e44a7d66dbd22732269a74d18c783b4b6160d348 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/903c64b78b24ce5cd56b439a7e4faa7c78e09b7d | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5c13df2abb5117373156315dc8307e03ccf38495 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/942e961f2848bc26215c99d4979d33cbe7a41b51 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c2269164d5e9fcf9d34356fc3e394a105771d45a | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f6dbde29a50cebed497b1338b28851de1bc3e29b | mips | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6ac259fb5662a998246c09ac8d63f651354f4669 | riscv64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1e06684254d0072c6684460a398a54de899777bf | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d387c9a2eadc4f568c156351629606743ae3a9cc | arc | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/66f337c1ec7c06eb786f4c68286d98a77e22c5c1 | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/712c2b789bfc1e4002868cfeed11c2306e38207e | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/8a8c44258c482ec6fd295c5ff86cc41095d7ef98 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a29c6ae512a13b1d628011ef54fc93c77f4e1d5e | sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/76b9c8d4110bce29df5de58a5ef8946fd61ad3e0 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2f7e6d9cd28ca9fb955442cc92e2227513f7dead | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d0c9980345be2df048cb2a06c990746fdd1bc85 | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/fea204d2bdec217f845913cb5ac70892eb80a01b | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c342951842b7bd0585465bb67c1cd2d235555039 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3650c2360e59d6040275917441167f077b9f6d05 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/44cbdcf9c60c4bbebfe3aa49dde18ae43529ea2b | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/10bb774224a7728d11b55b622d18dfa250807f77 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/446bc0cca9335b41ec811cfdcf498aea3b2b515d | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9b72d789a6f8354543ad32581980e8a286922499 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/47bd2072c29cc95c8bd663e0fe352ea5da5d8788 | ORPH microblaze | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/866bf58a6cc13d2ea7b9ca5e3aa23ec2d711ac72 | armeb | tinymembench-0.4 | NOK | http://autobuild.buildroot.net/results/4769b87b4bf98150bfccdbf8300ad3478f7fe634 | mips | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/c456216a2bcc762700b2aa3560b6bdf79a2010e6 | ORPH aarch64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/dcc8f864b025a838337487e51dee7f190692159e | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/eeb289c0606270f7769f435e1c1ee9b3c136bab8 | arm | unknown | NOK | http://autobuild.buildroot.net/results/3ac465887fbff95ff2274040323607e3ef0cfd86 | aarch64_be | unknown | NOK | http://autobuild.buildroot.net/results/b18e34c6f119b99a42a027b7ac6b2bb6cba4cd0e | m68k | unknown | NOK | http://autobuild.buildroot.net/results/77eb9989329355ba3bd8a456f67bedf066c6496d | sh4 | unknown | NOK | http://autobuild.buildroot.net/results/aeb606c9e74d43467562d357592c26eb786302a3 | armeb | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/df2bbbbe7dadbb40b04064464d7436e6ab092d3c | ORPH powerpc | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/a7b6ba51a73385015592ed3d35b7dcb3de186e7b | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/7c955e9fa5493228632d63474945618568603bb2 | aarch64_be | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/0c986f3e755dcdaa616ec12ebd7265cc74922c09 | mips | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/a155b33dd7845890a8a96b0fe84b65d8274b9762 | aarch64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/9bf99ff1f91f1852c34be32fe056dc259024d109 | s390x | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/5dc510c6d3588db0db604517a5881ac7565fa249 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/3cf2e4cd06ff07747f82d76415350c443cbc2090 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6e4689e491502aa0c99d7b75d54292a2d511235b | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4fe01bc6379bef710308205196c33284fee99073 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bc1fad293e53af8a5518d0583d031347256d63ba | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4aef168dd2ccdefced0c752c16b0ec74d54ac707 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/58b3e9687dbae9dff00b7d6ee20d64fc21da0ce0 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/18f141befaf054261488328491a82e3ed8b79437 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7366bde38545f53d22641cc25902c58695360a91 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0d8a23e5ebada15750e47f2f0d8a6b4d03fa3d1f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c25a0b48de43b341bf36dbda27198a584438e370 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/717e5a44238d9495468f9862b9368489482135fa | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 rsync-3.2.5 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d81d45617212dda52e12cf246d4759fb42d90a68 | x86_64 | rsync-3.2.5 | NOK | http://autobuild.buildroot.net/results/aa61b0479809c09b981db4a48b28aef5d895fced | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- igd2-for-linux-2.1 | 2 openssh-legal-info | 2 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 ipmiutil-3.1.8 | 1 ndisc6-1.0.5 | 1 openvmtools-11.3.5-18557794 | 1 package/openssh/openssh.mk:... | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/474193ca12c396f66e392c0f79ec08b42e398202 | powerpc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/07c463064c894b752d2b6bc75f8fbc0602ae645e | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/caf8dd10305e9c6036d7901fb0ebf40ee0d0572e | xtensa | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dee79943c4d6f6dafb74af23012fa6be3b9d4d42 | i586 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/215feec403a6ec28120c62c95b7a731552e13b97 | arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/42f31eb4285ab9791a6ea4b9f97ab0327e006d5c | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/a908392732e7b95f2d681988ce23626e26720835 | ORPH sparc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/ca64f55666708c8e5d848f3602bc5a9329948bc2 | ORPH aarch64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/0b2e01043aec8b0d736434554b78acd96b845d61 | aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/4baff817e811a2c0b93f28843ad18a3bc5e48f3f | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/e683b8662d1f169d1b6f35380a6fff3663aead2f | -- http://autobuild.buildroot.net From giulio.benetti at benettiengineering.com Thu Oct 20 06:53:40 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 08:53:40 +0200 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: Message-ID: Hi James, > Il giorno 20 ott 2022, alle ore 02:23, James Hilliard ha scritto: > > ?On Wed, Oct 19, 2022 at 7:36 PM James Hilliard > wrote: >> >>> On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti >>> wrote: >>> >>> Fixes: >>> http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ >> >> Hmm, this looks like a bug in the libnss makefile, what was the failure >> seen with make 4.3 here: >> https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > This patch also does not fix the build with make 4.4(make from master branch) > from my testing. > > Even without shuffle mode enabled the build appears to always fail. Thank you for testing, I have forgotten exactly to ask you to do it :-) since almost all the failures comes from your asahi-mini that I remember to have Make 4.4. So I try to reproduce the bug here at me and find out a fix. Thanks again Best regards Giulio > >> >>> >>> Signed-off-by: Giulio Benetti >>> --- >>> package/libnss/libnss.mk | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk >>> index 041b2cfc56..a613006f70 100644 >>> --- a/package/libnss/libnss.mk >>> +++ b/package/libnss/libnss.mk >>> @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING >>> LIBNSS_CPE_ID_VENDOR = mozilla >>> LIBNSS_CPE_ID_PRODUCT = nss >>> >>> -# Don't parallel build if make version = 4.3 >>> -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) >>> +# Don't parallel build if make version = 4.3 or 4.4 >>> +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) >>> LIBNSS_MAKE = $(MAKE1) >>> else >>> LIBNSS_MAKE = $(MAKE) >>> -- >>> 2.34.1 >>> >>> _______________________________________________ >>> buildroot mailing list >>> buildroot at buildroot.org >>> https://lists.buildroot.org/mailman/listinfo/buildroot From angelo at amarulasolutions.com Thu Oct 20 09:18:15 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Thu, 20 Oct 2022 11:18:15 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/qt6: Change license hashes In-Reply-To: <20221013121041.1398841-1-jesseevg@gmail.com> References: <20221013121041.1398841-1-jesseevg@gmail.com> Message-ID: On Thu, Oct 13, 2022 at 2:11 PM Jesse Van Gavere wrote: > There was a major rework of how licenses are used in the Qt codebase > along with a new location for all licenses, so change the hash file to > reflect these changes > > https://github.com/qt/qtserialport/commit/bb05a26d52c834cc7f3c549f3e5d66f76baf42a2 > > Changes for v2: > - Also adjust the makefiles to refer to these new license file names > - Added myself to the developers for the qt6 package for good measure > > Signed-off-by: Jesse Van Gavere > --- > Tested-by: Angelo Compagnucci > DEVELOPERS | 1 + > package/qt6/qt6base/qt6base.hash | 15 ++++++++++----- > package/qt6/qt6base/qt6base.mk | 4 ++-- > package/qt6/qt6serialport/qt6serialport.hash | 12 +++++++----- > package/qt6/qt6serialport/qt6serialport.mk | 4 ++-- > 5 files changed, 22 insertions(+), 14 deletions(-) > > diff --git a/DEVELOPERS b/DEVELOPERS > index 59121c6a54..6cb8d0fc54 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1478,6 +1478,7 @@ F: package/x11r7/xdriver_xf86-video-imx/ > F: package/x11r7/xdriver_xf86-video-imx-viv/ > > N: Jesse Van Gavere > +F: package/qt6/ > F: package/qt6/qt6serialport/ > > N: Jianhui Zhao > diff --git a/package/qt6/qt6base/qt6base.hash > b/package/qt6/qt6base/qt6base.hash > index 5dd26973fa..b004347a5a 100644 > --- a/package/qt6/qt6base/qt6base.hash > +++ b/package/qt6/qt6base/qt6base.hash > @@ -2,8 +2,13 @@ > sha256 cb6475a0bd8567c49f7ffbb072a05516ee6671171bed55db75b22b94ead9b37d > qtbase-everywhere-src-6.4.0.tar.xz > > # Hashes for license files > -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE.GPL2 > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSE.GPL3 > -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 > LICENSE.GPL3-EXCEPT > -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSE.LGPL3 > -sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSE.FDL > +sha256 e3ba223bb1423f0aad8c3dfce0fe3148db48926d41e6fbc3afbbf5ff9e1c89cb > LICENSES/Apache-2.0.txt > +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce > LICENSES/BSD-3-Clause.txt > +sha256 3abd6471b9a9a08d65ce771143f8e278bb4c1aeb10c1c2d476935a6b049653f5 > LICENSES/BSL-1.0.txt > +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSES/GFDL-1.3-no-invariants-only.txt > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSES/GPL-2.0-only.txt > +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSES/GPL-3.0-only.txt > +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSES/LGPL-3.0-only.txt > +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 > LICENSES/LicenseRef-Qt-Commercial.txt > +sha256 d040359701c01996a017d5c515678929cd1b0625e64cb86db44025fbb6cdf1fc > LICENSES/MIT.txt > +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 > LICENSES/Qt-GPL-exception-1.0.txt > diff --git a/package/qt6/qt6base/qt6base.mk b/package/qt6/qt6base/ > qt6base.mk > index b7ee6037f3..b53d53c653 100644 > --- a/package/qt6/qt6base/qt6base.mk > +++ b/package/qt6/qt6base/qt6base.mk > @@ -7,8 +7,8 @@ > QT6BASE_VERSION = $(QT6_VERSION) > QT6BASE_SITE = $(QT6_SITE) > QT6BASE_SOURCE = > qtbase-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6BASE_VERSION).tar.xz > -QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), > GFDL-1.3 (docs) > -QT6BASE_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT > LICENSE.LGPL3 LICENSE.FDL > +QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception (tools), > GFDL-1.3 no invariants (docs) > +QT6BASE_LICENSE_FILES = LICENSES/GPL-2.0-only.txt > LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt > LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt > QT6BASE_DEPENDENCIES = \ > host-ninja \ > host-qt6base \ > diff --git a/package/qt6/qt6serialport/qt6serialport.hash > b/package/qt6/qt6serialport/qt6serialport.hash > index fb1b3dcf6b..887f67b2ae 100644 > --- a/package/qt6/qt6serialport/qt6serialport.hash > +++ b/package/qt6/qt6serialport/qt6serialport.hash > @@ -2,8 +2,10 @@ > sha256 f148cc9e87ce2228e82bff7a64d9521339ece66c4c66aa43b91bac614f4a4483 > qtserialport-everywhere-src-6.4.0.tar.xz > > # Hashes for license files: > -sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSE.GPL2 > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSE.GPL3 > -sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 > LICENSE.GPL3-EXCEPT > -sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSE.LGPL3 > -sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d > LICENSE.FDL > +sha256 9f0490f18656c6f2435bd14f603ef0c96434d1825615363dce43abb42ed1dcce > LICENSES/BSD-3-Clause.txt > +sha256 110535522396708cea37c72a802c5e7e81391139f5f7985631c93ef242b206a4 > LICENSES/GFDL-1.3-no-invariants-only.txt > +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 > LICENSES/GPL-2.0-only.txt > +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 > LICENSES/GPL-3.0-only.txt > +sha256 da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768 > LICENSES/LGPL-3.0-only.txt > +sha256 9b1f50aae6267f9d5e0ceb6775ee86450262c25ec7c0573e151fe5d3f18a4700 > LICENSES/LicenseRef-Qt-Commercial.txt > +sha256 40678d338ce53cd93f8b22b281a2ecbcaa3ee65ce60b25ffb0c462b0530846b2 > LICENSES/Qt-GPL-exception-1.0.txt > diff --git a/package/qt6/qt6serialport/qt6serialport.mk > b/package/qt6/qt6serialport/qt6serialport.mk > index 01763657b8..03197fd60d 100644 > --- a/package/qt6/qt6serialport/qt6serialport.mk > +++ b/package/qt6/qt6serialport/qt6serialport.mk > @@ -9,8 +9,8 @@ QT6SERIALPORT_SITE = $(QT6_SITE) > QT6SERIALPORT_SOURCE = > qtserialport-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6SERIALPORT_VERSION).tar.xz > QT6SERIALPORT_INSTALL_STAGING = YES > QT6SERIALPORT_SUPPORTS_IN_SOURCE_BUILD = NO > -QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception > (tools), GFDL-1.3 (docs) > -QT6SERIALPORT_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 > LICENSE.GPL3-EXCEPT LICENSE.LGPL3 LICENSE.FDL > +QT6SERIALPORT_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception > (tools), GFDL-1.3 no invariants (docs) > +QT6SERIALPORT_LICENSE_FILES = LICENSES/GPL-2.0-only.txt > LICENSES/GPL-3.0-only.txt LICENSES/Qt-GPL-exception-1.0.txt > LICENSES/LGPL-3.0-only.txt LICENSES/GFDL-1.3-no-invariants-only.txt > QT6SERIALPORT_CONF_OPTS = \ > -GNinja \ > -DQT_HOST_PATH=$(HOST_DIR) \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From bugzilla at busybox.net Thu Oct 20 10:27:23 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:27:23 +0000 Subject: [Buildroot] [Bug 15071] New: RTL8723BS library is outdated Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 Bug ID: 15071 Summary: RTL8723BS library is outdated Product: buildroot Version: 2022.02.6 Hardware: Other OS: Linux Status: NEW Severity: normal Priority: P5 Component: Outdated package Assignee: unassigned at buildroot.uclibc.org Reporter: alirezatm at ymail.com CC: buildroot at uclibc.org Target Milestone: --- Good day, It seems that the RTL8723BS library in the buildroot settings accessible by "make menuconfig" and "make linux-menunconfig" is outdated and hasn't been updated for a long time In the "~/buildroot-2022.02.6/package/rtl8723bs/rtl8723bs.mk" file, I saw this line: RTL8723BS_SITE = $(call github,hadess,rtl8723bs,$(RTL8723BS_VERSION)) which means that it's fetching the library from https://github.com/hadess/rtl8723bs which as you can see is not being updated anymore and is extremely outdated. For example it doesn't respect the changes to the timer done in the 4.15 kernel I tried lowering my linux kernel version in the "make menuconfig" settings as a compromise but this library still won't compile. Tried and failed with kernel versions 4.11, 4.12 and 4.14 The kernel itself seems to have an up-to-date driver for it (https://github.com/torvalds/linux/tree/master/drivers/staging/rtl8723bs) but I don't think we can access it via buildroot Is there any chance to fix this library? Thanks I've attached my .config file if it helps -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 10:30:41 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:30:41 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 alirezatm at ymail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|normal |major --- Comment #1 from alirezatm at ymail.com --- Sorry, seems that this website has a 75kB limit, so I've uploaded my .config file here: https://anonymfile.com/pZKO/.config -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 10:57:38 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 10:57:38 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 --- Comment #2 from Giulio Benetti --- (In reply to alirezatm from comment #0) Hi, it's true, package rtl8723bs is outdated and indeed has been dropped with this commit: https://git.busybox.net/buildroot/commit/?id=7763ba7007172ceb5e928ae5902735d727aaa90d As pointed by: https://github.com/hadess/rtl8723bs/commit/3bb1d33ad98c1d77b5e17a1b707e137b35e6d0a5 now the driver has made it into staging Linux driver folder. So you can access and configure Linux by issuing: $ make linux-menuconfig and then you can find RTL8723BS driver. But take care because it needs some CONFIG_ to be enabled: CONFIG_STAGING=y CONFIG_WLAN=y CONFIG_MMC=y CONFIG_CFG80211=y CONFIG_MODULES=y To find these informations you can search "rtl8723bs" in linux-menuconfig(as well as in Buildroot menuconfig) by typing "/" and there it will be shown the "depends on" and what it "Selects". This way you should be able to have the driver built. Best regards -- You are receiving this mail because: You are on the CC list for the bug. From dumasv.dev at gmail.com Thu Oct 20 11:46:41 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:46:41 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221020114641.481922-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized. This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +157,10 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:50:30 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:50:30 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221006155217.626248-1-dumasv.dev@gmail.com> References: <20221006155217.626248-1-dumasv.dev@gmail.com> Message-ID: <20221020115030.483083-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized. This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..7ed1851aac 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,40 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:52:39 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:52:39 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: <20221020115239.483333-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized, significantly reducing the amount of time it takes to fix all the paths.On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..cef7a48e76 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From dumasv.dev at gmail.com Thu Oct 20 11:55:12 2022 From: dumasv.dev at gmail.com (Victor Dumas) Date: Thu, 20 Oct 2022 13:55:12 +0200 Subject: [Buildroot] [PATCH v4] support/scripts/fix-rpath: parallelize patching files In-Reply-To: <20221019124017.427199-1-dumasv.dev@gmail.com> References: <20221019124017.427199-1-dumasv.dev@gmail.com> Message-ID: <20221020115512.483686-1-dumasv.dev@gmail.com> Using "xargs" instead of "while read" loop allows for the patching of files to be parallelized This significantly reduces the amount of time it takes to fix all the paths. On a larger RFS(~300MB) this script was taking 5 minutes, it now only takes about 30s on a 12 core machine Signed-off-by: Victor Dumas --- support/scripts/fix-rpath | 66 ++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/support/scripts/fix-rpath b/support/scripts/fix-rpath index 3e67e770e5..cef7a48e76 100755 --- a/support/scripts/fix-rpath +++ b/support/scripts/fix-rpath @@ -58,6 +58,38 @@ HOST_EXCLUDEPATHS="/share/terminfo" STAGING_EXCLUDEPATHS="/usr/include /usr/share/terminfo" TARGET_EXCLUDEPATHS="/lib/firmware" +patch_file() { + PATCHELF="${1}" + rootdir="${2}" + sanitize_extra_args="${3}" + file="${4}" + + # check if it's an ELF file + rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) + if test $? -ne 0 ; then + return 0 + fi + + # make files writable if necessary + changed=$(chmod -c u+w "${file}") + + # With per-package directory support, most RPATH of host + # binaries will point to per-package directories. This won't + # work with the --make-rpath-relative ${rootdir} invocation as + # the per-package host directory is not within ${rootdir}. So, + # we rewrite all RPATHs pointing to per-package directories so + # that they point to the global host directry. + changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") + if test "${rpath}" != "${changed_rpath}" ; then + ${PATCHELF} --set-rpath ${changed_rpath} "${file}" + fi + + # call patchelf to sanitize the rpath + ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" + # restore the original permission + test "${changed}" != "" && chmod u-w "${file}" +} + main() { local rootdir local tree="${1}" @@ -123,34 +155,12 @@ main() { ;; esac - find_args+=( "-type" "f" "-print" ) - - while read file ; do - # check if it's an ELF file - rpath=$(${PATCHELF} --print-rpath "${file}" 2>&1) - if test $? -ne 0 ; then - continue - fi - - # make files writable if necessary - changed=$(chmod -c u+w "${file}") - - # With per-package directory support, most RPATH of host - # binaries will point to per-package directories. This won't - # work with the --make-rpath-relative ${rootdir} invocation as - # the per-package host directory is not within ${rootdir}. So, - # we rewrite all RPATHs pointing to per-package directories so - # that they point to the global host directry. - changed_rpath=$(echo ${rpath} | sed "s@${PER_PACKAGE_DIR}/[^/]\+/host@${HOST_DIR}@") - if test "${rpath}" != "${changed_rpath}" ; then - ${PATCHELF} --set-rpath ${changed_rpath} "${file}" - fi - - # call patchelf to sanitize the rpath - ${PATCHELF} --make-rpath-relative "${rootdir}" ${sanitize_extra_args[@]} "${file}" - # restore the original permission - test "${changed}" != "" && chmod u-w "${file}" - done < <(find "${rootdir}" ${find_args[@]}) + find_args+=( "-type" "f" "-print0" ) + + export -f patch_file + # Limit the number of cores used + procs=$(echo -e "$(($(nproc)-2)) \n 1" | sort -n | tail -n1) + find "${rootdir}" ${find_args[@]} | xargs -0 -r -P ${procs} -I {} bash -c "patch_file '${PATCHELF}' '${rootdir}' '${sanitize_extra_args}' $@" _ {} # Restore patched patchelf utility test "${tree}" = "host" && mv "${PATCHELF}.__to_be_patched" "${PATCHELF}" -- 2.30.2 From john at metanate.com Thu Oct 20 12:15:21 2022 From: john at metanate.com (John Keeping) Date: Thu, 20 Oct 2022 13:15:21 +0100 Subject: [Buildroot] [PATCH v2] package/sbc: add config option to control tools build Message-ID: <20221020121521.2041129-1-john@metanate.com> libsndfile is only needed by the sbctester utility and the library can be built without this dependency. Add a config option to cover not just sbctester but the command-line utilities as well. While the utilities may be useful for debugging, normal usage will only need libsbc and these applications can be omitted. Signed-off-by: John Keeping --- v2: - Fix autocomplete error in select BR2_PACKAGE_LIBSNDFILE package/sbc/Config.in | 8 +++++++- package/sbc/sbc.mk | 9 ++++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/sbc/Config.in b/package/sbc/Config.in index f1dbc0ec2c..565e3e6596 100644 --- a/package/sbc/Config.in +++ b/package/sbc/Config.in @@ -1,8 +1,14 @@ config BR2_PACKAGE_SBC bool "sbc" - select BR2_PACKAGE_LIBSNDFILE help An audio codec to connect bluetooth high quality audio devices like headphones or loudspeakers. http://www.bluez.org/ + +config BR2_PACKAGE_SBC_TOOLS + bool "tools" + depends on BR2_PACKAGE_SBC + select BR2_PACKAGE_LIBSNDFILE + help + Build the command-line SBC tools as well as the library. diff --git a/package/sbc/sbc.mk b/package/sbc/sbc.mk index 744ce5f895..245ff11ced 100644 --- a/package/sbc/sbc.mk +++ b/package/sbc/sbc.mk @@ -8,8 +8,15 @@ SBC_VERSION = 2.0 SBC_SOURCE = sbc-$(SBC_VERSION).tar.xz SBC_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth SBC_INSTALL_STAGING = YES -SBC_DEPENDENCIES = libsndfile host-pkgconf +SBC_DEPENDENCIES = host-pkgconf SBC_LICENSE = GPL-2.0+ (programs), LGPL-2.1+ (library) SBC_LICENSE_FILES = COPYING COPYING.LIB +ifeq ($(BR2_PACKAGE_SBC_TOOLS),y) +SBC_DEPENDENCIES += libsndfile +SBC_CONF_OPTS += --enable-tools --enable-tester +else +SBC_CONF_OPTS += --disable-tools --disable-tester +endif + $(eval $(autotools-package)) -- 2.38.1 From john at metanate.com Thu Oct 20 12:07:39 2022 From: john at metanate.com (John Keeping) Date: Thu, 20 Oct 2022 13:07:39 +0100 Subject: [Buildroot] [PATCH] package/sbc: add config option to control tools build Message-ID: <20221020120739.1929645-1-john@metanate.com> libsndfile is only needed by the sbctester utility and the library can be built without this dependency. Add a config option to cover not just sbctester but the command-line utilities as well. While the utilities may be useful for debugging, normal usage will only need libsbc and these applications can be omitted. Signed-off-by: John Keeping --- package/sbc/Config.in | 8 +++++++- package/sbc/sbc.mk | 9 ++++++++- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/package/sbc/Config.in b/package/sbc/Config.in index f1dbc0ec2c..7e832b1e87 100644 --- a/package/sbc/Config.in +++ b/package/sbc/Config.in @@ -1,8 +1,14 @@ config BR2_PACKAGE_SBC bool "sbc" - select BR2_PACKAGE_LIBSNDFILE help An audio codec to connect bluetooth high quality audio devices like headphones or loudspeakers. http://www.bluez.org/ + +config BR2_PACKAGE_SBC_TOOLS + bool "tools" + depends on BR2_PACKAGE_SBC + select BR2_PACKAGE_SBC_TOOLS + help + Build the command-line SBC tools as well as the library. diff --git a/package/sbc/sbc.mk b/package/sbc/sbc.mk index 744ce5f895..245ff11ced 100644 --- a/package/sbc/sbc.mk +++ b/package/sbc/sbc.mk @@ -8,8 +8,15 @@ SBC_VERSION = 2.0 SBC_SOURCE = sbc-$(SBC_VERSION).tar.xz SBC_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth SBC_INSTALL_STAGING = YES -SBC_DEPENDENCIES = libsndfile host-pkgconf +SBC_DEPENDENCIES = host-pkgconf SBC_LICENSE = GPL-2.0+ (programs), LGPL-2.1+ (library) SBC_LICENSE_FILES = COPYING COPYING.LIB +ifeq ($(BR2_PACKAGE_SBC_TOOLS),y) +SBC_DEPENDENCIES += libsndfile +SBC_CONF_OPTS += --enable-tools --enable-tester +else +SBC_CONF_OPTS += --disable-tools --disable-tester +endif + $(eval $(autotools-package)) -- 2.38.1 From james.hilliard1 at gmail.com Thu Oct 20 13:29:18 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Thu, 20 Oct 2022 09:29:18 -0400 Subject: [Buildroot] [PATCH] package/libnss: disable parallel build with Make 4.4 In-Reply-To: References: Message-ID: On Thu, Oct 20, 2022 at 2:53 AM Giulio Benetti wrote: > > Hi James, > > > Il giorno 20 ott 2022, alle ore 02:23, James Hilliard ha scritto: > > > > ?On Wed, Oct 19, 2022 at 7:36 PM James Hilliard > > wrote: > >> > >>> On Wed, Oct 19, 2022 at 3:55 PM Giulio Benetti > >>> wrote: > >>> > >>> Fixes: > >>> http://autobuild.buildroot.net/results/433/4335d0d8454035a8f74645ba8d6c2329ab2e5480/ > >> > >> Hmm, this looks like a bug in the libnss makefile, what was the failure > >> seen with make 4.3 here: > >> https://lore.kernel.org/buildroot/20220101210952.2148256-1-giulio.benetti at benettiengineering.com/ > > > > This patch also does not fix the build with make 4.4(make from master branch) > > from my testing. > > > > Even without shuffle mode enabled the build appears to always fail. > > Thank you for testing, I have forgotten exactly to ask you to do it :-) since almost all the failures comes from your asahi-mini that I remember to have Make 4.4. I'm running make master branch on all my autobuilders at the moment, the failures aren't limited to asahi-mini: http://autobuild.buildroot.net/?reason=libnss-3.84 > > So I try to reproduce the bug here at me and find out a fix. Use make master branch from here for testing: git clone https://git.savannah.gnu.org/git/make.git > > Thanks again > > Best regards > Giulio > > > > >> > >>> > >>> Signed-off-by: Giulio Benetti > >>> --- > >>> package/libnss/libnss.mk | 4 ++-- > >>> 1 file changed, 2 insertions(+), 2 deletions(-) > >>> > >>> diff --git a/package/libnss/libnss.mk b/package/libnss/libnss.mk > >>> index 041b2cfc56..a613006f70 100644 > >>> --- a/package/libnss/libnss.mk > >>> +++ b/package/libnss/libnss.mk > >>> @@ -15,8 +15,8 @@ LIBNSS_LICENSE_FILES = nss/COPYING > >>> LIBNSS_CPE_ID_VENDOR = mozilla > >>> LIBNSS_CPE_ID_PRODUCT = nss > >>> > >>> -# Don't parallel build if make version = 4.3 > >>> -ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3),) > >>> +# Don't parallel build if make version = 4.3 or 4.4 > >>> +ifneq ($(filter $(RUNNING_MAKE_VERSION),4.3 4.4),) > >>> LIBNSS_MAKE = $(MAKE1) > >>> else > >>> LIBNSS_MAKE = $(MAKE) > >>> -- > >>> 2.34.1 > >>> > >>> _______________________________________________ > >>> buildroot mailing list > >>> buildroot at buildroot.org > >>> https://lists.buildroot.org/mailman/listinfo/buildroot > From tobias at waldekranz.com Thu Oct 20 14:14:08 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:08 +0200 Subject: [Buildroot] [PATCH 0/4] package/kmemd: new package Message-ID: <20221020141412.346992-1-tobias@waldekranz.com> kmemd implements a GDB stub that let's you access a running kernel's memory. There's no way to control the flow of execution in any way, but you can inspect internal data structures with all the DWARF parsing and scripting power of GDB - without the need for any hardware debugger or a dedicated KGDB serial port. I've chosen not to install any startup scripts for it, since it effectively provides the same service as Heartbleed, but with a much better UX :) The expectation is that the user will start it manually when needed. Before adding kmemd, 1-3/4 fixes some issues around libbpf. The cross-compilation fix for 32-bit targets (1/4) has been accepted upstream[1]. [1]: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Tobias Waldekranz (4): package/libbpf: fix cross compilation for 32-bit targets package/libbpf: remove architecture restrictions package/libbpf: extract dependencies to separate kconfig symbol package/kmemd: new package package/Config.in | 1 + package/kmemd/Config.in | 11 ++++++ package/kmemd/kmemd.hash | 5 +++ package/kmemd/kmemd.mk | 20 ++++++++++ ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ package/libbpf/Config.in | 24 ++++-------- 6 files changed, 81 insertions(+), 17 deletions(-) create mode 100644 package/kmemd/Config.in create mode 100644 package/kmemd/kmemd.hash create mode 100644 package/kmemd/kmemd.mk create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:09 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-2-tobias@waldekranz.com> Add upstream patch that sources the library path (lib vs. lib64) from the compiler rather than from uname(1). Signed-off-by: Tobias Waldekranz --- ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch new file mode 100644 index 0000000000..3730b2fa41 --- /dev/null +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch @@ -0,0 +1,37 @@ +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Fri, 14 Oct 2022 21:14:14 +0200 +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets + +Determining the correct library installation path (lib vs. lib64) +using uname(1) breaks in cross compilation scenarios where word widths +differ between the host and target system. + +Instead, source the information from the compilers '-dumpmachine' +option (supported by both GCC and Clang). + +We call this the "host" architecture, using the same nomenclature as +Autotools (--host configure option). + +Signed-off-by: Tobias Waldekranz +--- + src/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index 3cd0854..d535f81 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -77,7 +77,8 @@ INSTALL = install + + DESTDIR ?= + +-ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(shell uname -m)),) ++HOSTARCH = $(firstword $(subst -, ,$(shell $(CC) -dumpmachine))) ++ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(HOSTARCH)),) + LIBSUBDIR := lib64 + else + LIBSUBDIR := lib +-- +2.34.1 + -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:11 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-4-tobias@waldekranz.com> This makes it obvious that the comment is just the negation of the dependency requirements. It also makes it easier for other packages to depend on libbpf. Signed-off-by: Tobias Waldekranz --- package/libbpf/Config.in | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index 1465366c9e..7e816c193d 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,11 +1,16 @@ -config BR2_PACKAGE_LIBBPF - bool "libbpf" +config BR2_PACKAGE_LIBBPF_SUPPORTED + bool depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils + default y + +config BR2_PACKAGE_LIBBPF + bool "libbpf" + depends on BR2_PACKAGE_LIBBPF_SUPPORTED select BR2_PACKAGE_ELFUTILS select BR2_PACKAGE_ZLIB help @@ -17,8 +22,4 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_TOOLCHAIN_HAS_SYNC_4 - depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ - || !BR2_TOOLCHAIN_HAS_THREADS \ - || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 \ - || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC) + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:10 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:10 +0200 Subject: [Buildroot] [PATCH 2/4] package/libbpf: remove architecture restrictions In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-3-tobias@waldekranz.com> Since 3145adfb69ba, libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. f693354c30bd was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM. Signed-off-by: Tobias Waldekranz --- package/libbpf/Config.in | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index b3d6e44c6a..1465366c9e 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,15 +1,5 @@ -config BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS - bool - # see src/bpf.c - default y if BR2_arc - default y if BR2_aarch64 || BR2_aarch64_be - default y if BR2_i386 || BR2_x86_64 - default y if BR2_sparc || BR2_sparc64 - default y if BR2_s390x - config BR2_PACKAGE_LIBBPF bool "libbpf" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils @@ -27,7 +17,6 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ -- 2.34.1 From tobias at waldekranz.com Thu Oct 20 14:14:12 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 20 Oct 2022 16:14:12 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221020141412.346992-1-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> Message-ID: <20221020141412.346992-5-tobias@waldekranz.com> kmemd let's you inspect a live Linux kernel's memory using GDB. Signed-off-by: Tobias Waldekranz --- package/Config.in | 1 + package/kmemd/Config.in | 11 +++++++++++ package/kmemd/kmemd.hash | 5 +++++ package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ 4 files changed, 37 insertions(+) create mode 100644 package/kmemd/Config.in create mode 100644 package/kmemd/kmemd.hash create mode 100644 package/kmemd/kmemd.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ebafe11dea 100644 --- a/package/Config.in +++ b/package/Config.in @@ -111,6 +111,7 @@ menu "Debugging, profiling and benchmark" source "package/iozone/Config.in" source "package/kexec/Config.in" source "package/kexec-lite/Config.in" + source "package/kmemd/Config.in" source "package/kvm-unit-tests/Config.in" source "package/kyua/Config.in" source "package/latencytop/Config.in" diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in new file mode 100644 index 0000000000..2190488b0f --- /dev/null +++ b/package/kmemd/Config.in @@ -0,0 +1,11 @@ +config BR2_PACKAGE_KMEMD + bool "kmemd" + depends on BR2_PACKAGE_LIBBPF_SUPPORTED + select BR2_PACKAGE_LIBBPF + help + Explore a live Linux kernel's memory using GDB + + https://github.com/wkz/kmemd + +comment "kmemd needs libbpf" + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash new file mode 100644 index 0000000000..60b8589dd2 --- /dev/null +++ b/package/kmemd/kmemd.hash @@ -0,0 +1,5 @@ +# Locally calculated +md5 9954bf82279eeb0da016654689f69ac2 kmemd-1.0.0.tar.gz +sha1 3ae3bdceb70d674f41f56cd489c7497944b9b0f0 kmemd-1.0.0.tar.gz +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/kmemd/kmemd.mk b/package/kmemd/kmemd.mk new file mode 100644 index 0000000000..902941b981 --- /dev/null +++ b/package/kmemd/kmemd.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# kmemd +# +################################################################################ + +KMEMD_VERSION = 1.0.0 +KMEMD_SITE = https://github.com/wkz/kmemd/releases/download/$(KMEMD_VERSION) +KMEMD_LICENSE = GPL-2.0 +KMEMD_LICENSE_FILES = COPYING +KMEMD_DEPENDENCIES = libbpf + +define KMEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_BPF_SYSCALL) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) + $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS) +endef + +$(eval $(autotools-package)) -- 2.34.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:28:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:28:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/rtl_433: add RTL_433_CPE_ID_VENDOR Message-ID: <20221020162856.201351-1-fontaine.fabrice@gmail.com> cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 Signed-off-by: Fabrice Fontaine --- package/rtl_433/rtl_433.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rtl_433/rtl_433.mk b/package/rtl_433/rtl_433.mk index 8326caedb2..74a0b54a3d 100644 --- a/package/rtl_433/rtl_433.mk +++ b/package/rtl_433/rtl_433.mk @@ -8,6 +8,7 @@ RTL_433_VERSION = 21.12 RTL_433_SITE = $(call github,merbanan,rtl_433,$(RTL_433_VERSION)) RTL_433_LICENSE = GPL-2.0+ RTL_433_LICENSE_FILES = COPYING +RTL_433_CPE_ID_VENDOR = rtl_433_project # Force Release build to remove ASAN. RTL_433_CONF_OPTS = \ -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:29:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:29:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/zlog: bump to version 1.2.16 Message-ID: <20221020162948.201798-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine --- ...verflow-at-zlog_conf_build_with_file.patch | 25 ------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 2 +- 3 files changed, 2 insertions(+), 27 deletions(-) delete mode 100644 package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..6e85cf409b 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 16:33:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 18:33:12 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/zlog: bump to version 1.2.16 Message-ID: <20221020163312.203021-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Drop ZLOG_IGNORE_CVES ...verflow-at-zlog_conf_build_with_file.patch | 25 ------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 5 +--- 3 files changed, 2 insertions(+), 30 deletions(-) delete mode 100644 package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..329f2cfe2c 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,16 +4,13 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING ZLOG_CPE_ID_VENDOR = zlog_project ZLOG_INSTALL_STAGING = YES -# 0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch -ZLOG_IGNORE_CVES += CVE-2021-43521 - define ZLOG_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE1) CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" \ -C $(@D) all -- 2.35.1 From fontaine.fabrice at gmail.com Thu Oct 20 17:02:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Thu, 20 Oct 2022 19:02:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/squashfs: security bump to version 4.5.1 Message-ID: <20221020170233.230696-1-fontaine.fabrice@gmail.com> - Fix CVE-2021-40153 - CVE-2021-41072 which is a writing outside of destination exploit, has been fixed. - Drop patch (already in version) - Set INSTALL_MANPAGES_DIR to an empty value to disable build and install of man pages which were added with https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 Signed-off-by: Fabrice Fontaine --- ...e-of-INSTALL_DIR-for-symlink-targets.patch | 37 ------------------- package/squashfs/squashfs.hash | 2 +- package/squashfs/squashfs.mk | 8 ++-- 3 files changed, 6 insertions(+), 41 deletions(-) delete mode 100644 package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch diff --git a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch b/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch deleted file mode 100644 index 997719e63a..0000000000 --- a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch +++ /dev/null @@ -1,37 +0,0 @@ -From f5c908e92d4c055859be2fddbda266d9e3bfd415 Mon Sep 17 00:00:00 2001 -From: Patrick McCarty -Date: Mon, 26 Jul 2021 11:38:43 -0700 -Subject: [PATCH] Avoid use of INSTALL_DIR for symlink targets - -In case INSTALL_DIR is overridden with a staged install location, using -INSTALL_DIR for the symlink target path prefix will yield an incorrect location -for the final installation. - -Because the symlink itself is already installed to INSTALL_DIR, simply removing -the INSTALL_DIR prefix suffices as a fix. - -Note that using $DESTDIR/$INSTALL_DIR where appropriate can avoid this type of -issue, but that can be considered a future enhancement. - -Signed-off-by: Patrick McCarty -Upstream: f5c908e92d4c055859be2fddbda266d9e3bfd415 -Signed-off-by: Thomas Petazzoni ---- - squashfs-tools/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/squashfs-tools/Makefile b/squashfs-tools/Makefile -index f5a55f1..7262a2e 100755 ---- a/squashfs-tools/Makefile -+++ b/squashfs-tools/Makefile -@@ -406,5 +406,5 @@ install: mksquashfs unsquashfs - mkdir -p $(INSTALL_DIR) - cp mksquashfs $(INSTALL_DIR) - cp unsquashfs $(INSTALL_DIR) -- ln -fs $(INSTALL_DIR)/unsquashfs $(INSTALL_DIR)/sqfscat -- ln -fs $(INSTALL_DIR)/mksquashfs $(INSTALL_DIR)/sqfstar -+ ln -fs unsquashfs $(INSTALL_DIR)/sqfscat -+ ln -fs mksquashfs $(INSTALL_DIR)/sqfstar --- -2.31.1 - diff --git a/package/squashfs/squashfs.hash b/package/squashfs/squashfs.hash index 09a2bae364..13d5aed71f 100644 --- a/package/squashfs/squashfs.hash +++ b/package/squashfs/squashfs.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 b9e16188e6dc1857fe312633920f7d71cc36b0162eb50f3ecb1f0040f02edddd squashfs-4.5.tar.gz +sha256 277b6e7f75a4a57f72191295ae62766a10d627a4f5e5f19eadfbc861378deea7 squashfs-4.5.1.tar.gz # License files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squashfs/squashfs.mk b/package/squashfs/squashfs.mk index f64d441c9b..323908d94e 100644 --- a/package/squashfs/squashfs.mk +++ b/package/squashfs/squashfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUASHFS_VERSION = 4.5 +SQUASHFS_VERSION = 4.5.1 SQUASHFS_SITE = $(call github,plougher,squashfs-tools,$(SQUASHFS_VERSION)) SQUASHFS_LICENSE = GPL-2.0+ SQUASHFS_LICENSE_FILES = COPYING @@ -75,7 +75,8 @@ endef define SQUASHFS_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) $(SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin \ + INSTALL_MANPAGES_DIR="" install endef define HOST_SQUASHFS_BUILD_CMDS @@ -89,7 +90,8 @@ endef define HOST_SQUASHFS_INSTALL_CMDS $(HOST_MAKE_ENV) $(MAKE) $(HOST_SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin \ + INSTALL_MANPAGES_DIR="" install endef $(eval $(generic-package)) -- 2.35.1 From bugzilla at busybox.net Thu Oct 20 17:13:12 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 17:13:12 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 --- Comment #1 from hello.skyclo at gmail.com --- I downgraded to the 2022.08.1 release from the master branch and nodejs builds. I think there is a regression somewhere between the 08 release and the current commit, but I'm not sure where. The overall build still fails, however, it is due to Bug 14936 (nodejs/node#37441). I'll try to look into it more. -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Thu Oct 20 17:14:13 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Thu, 20 Oct 2022 17:14:13 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 hello.skyclo at gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Host| |x86_64 Target| |i386 -- You are receiving this mail because: You are on the CC list for the bug. From giulio.benetti at benettiengineering.com Thu Oct 20 17:40:31 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 19:40:31 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.1 Message-ID: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> Signed-off-by: Giulio Benetti --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..9489f25c6a 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 4a6ce097b75a8121facc4ba83b5b083bfec657f45b003cd5a3424f2ae6b4434d harfbuzz-5.3.1.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..b0112168e1 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.1 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) -- 2.34.1 From giulio.benetti at benettiengineering.com Thu Oct 20 17:41:48 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Thu, 20 Oct 2022 19:41:48 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.0 In-Reply-To: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> References: <20221010181148.18858-1-giulio.benetti@benettiengineering.com> Message-ID: <5715fff8-3bee-58ac-4b1c-0a902a3bc64a@benettiengineering.com> Hi All, On 10/10/22 20:11, Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash > index 9ec5c63f55..3582de2f30 100644 > --- a/package/harfbuzz/harfbuzz.hash > +++ b/package/harfbuzz/harfbuzz.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz > +sha256 a05e19e3f52da24ed071522f0fddf872157d7d25e869cfd156cd6f1e81c42152 harfbuzz-5.3.0.tar.xz > sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING > diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk > index 75d55106ea..8ef41d3952 100644 > --- a/package/harfbuzz/harfbuzz.mk > +++ b/package/harfbuzz/harfbuzz.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -HARFBUZZ_VERSION = 5.1.0 > +HARFBUZZ_VERSION = 5.3.0 > HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) > HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz > HARFBUZZ_LICENSE = MIT, ISC (ucdn library) This is superseded by: https://patchwork.ozlabs.org/project/buildroot/patch/20221020174031.335520-1-giulio.benetti at benettiengineering.com/ Best regards -- Giulio Benetti CEO/CTO at Benetti Engineering sas From simon.richter at ptwdosimetry.com Thu Oct 20 18:16:38 2022 From: simon.richter at ptwdosimetry.com (Richter Simon) Date: Thu, 20 Oct 2022 18:16:38 +0000 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221019205236.GG3666@scaer> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> Message-ID: Hi Yann, Am 19.10.22 um 22:52 schrieb Yann E. MORIN: > Could you provide a bit more details on how this works? Sure. Currently the script generates a config file containing: [source.crates-io] replace-with = "vendored-sources" [source.vendored-sources] directory = "VENDOR" This works for most projects since they do not use dependencies from other sources besides crates.io. But if a project needs dependencies from other sources, say github, there needs to be an extra entry for each non-crates.io dependency. As an example, here is the needed vendor config for conduit - a matrix homeserver. (https://gitlab.com/famedly/conduit rev cb2b5beea8a3fb27ed514ee9e46b5729aa272179) [source.crates-io] replace-with = "vendored-sources" [source."https://github.com/ruma/ruma"] git = "https://github.com/ruma/ruma" rev = "fba6f70c2df8294f96567f56464a46e3d237a8e9" replace-with = "vendored-sources" [source."https://github.com/timokoesters/heed.git"] git = "https://github.com/timokoesters/heed.git" rev = "f6f825da7fb2c758867e05ad973ef800a6fe1d5d" replace-with = "vendored-sources" [source."https://github.com/timokoesters/reqwest"] git = "https://github.com/timokoesters/reqwest" rev = "57b7cf4feb921573dfafad7d34b9ac6e44ead0bd" replace-with = "vendored-sources" [source.vendored-sources] directory = "vendor" For the current script this means one has to create a patch for the generated .cargo/config to contain the missing lines. That is not nice for two reasons: 1. the corresponding package must contain a patch that patches a file that is not part of the original sources of the package. 2. every time one or more dependencies are updated, the patch has to be changed. > Also, can we have a package that uses non-crates.io dependencies, so > that we have a test-case to ensure we have no regression? I'm not sure if i understood that correctly. Do you mean bringing a package into buildroot or if we already have a package that can be used for a test? If the second, no, i did not find any package that has non-crates.io dependencies. > This means that vendoring step is then entirely silent, and there is no > progress report. > > Since the download during the vendoring can be quite big, that means a > long pause without any feedback to the user that something is going on. > > Also, if there is a download issue, there is no way to find what > happened. That's correct, did not think about that. > Can we keep the vendoring to stdout as it currently is, and re-run it > right after, just to generate the config.toml file? I.e. something like: > > cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR 2>&1 \ > |sed -ne '1,/To use vendored sources, add/!p' > .cargo/config While digging around i found the following solution: cargo vendor \ --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ --locked VENDOR \ | tee .cargo/config Cargo seems to print all progress output to stderr but not the needed output for the config. This goes to stdout. So we only have to tee stdout to the .cargo/config file. I will update the patch accordingly. > Finally, unrelated to your change: if the package already has a > .cargo/config.toml, then we irremediably override it. Is there something > in that file that would otherwise be required to do the build? Yes, i noticed that too. Overwriting a possibly existing project specific configuration is not good. I think this also should be changed (in a different patch, as mentioned). > Can we simply append to the file rather than overwrite it, i.e.: > .... >> .cargo/config.toml Unfortunately it is not that simple because of two reasons: 1. cargo looks for a .cargo/config or (up from cargo 1.39) a .cargo/config.toml file for configuration. If both files exist, cargo uses .cargo/config and ignores the .cargo/config.toml file. 2. if configuration entries for vendoring already exist in a configuration, it is not allowed to add them again. Cargo will not build the project if a corresponding entry exists more than once. The first case would be quiet easy to address but the second one would need some sort of merging. > Note that if we want to change that, this should be a different patch, > of course. Absolutely. So, speaking for this patch, i would keep the current behavior "overwrite every possibly existing config with the vendoring information". Regards, Simon From bernd.kuhls at t-online.de Thu Oct 20 18:54:59 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Thu, 20 Oct 2022 20:54:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 Message-ID: <20221020185459.28407-1-bernd.kuhls@t-online.de> Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...ion-to-disable-optional-neon-suppor.patch} | 0 ...-Include-stddef.h-to-fix-build-erro.patch} | 0 ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ .../0007-include-drop-c11-compat-h.patch | 100 -------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..3712c79db0 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.2 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..f10f8fe112 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html +sha256 2de11fb74fc5cc671b818e49fe203cea0cd1d8b69756e97cdb06a2f4e78948f9 mesa-22.2.2.tar.xz +sha512 a1eb67e1ae4880c79b1fdc570f4389baba0b8ba796da7e695c9af19a7d92b6c06b95570e6c796548b61355989025fb7efbf9acac74cbd695f7e297dc913b933c mesa-22.2.2.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index daefd6f6d5..bac071ecb3 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.2 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos -- 2.30.2 From yann.morin.1998 at free.fr Thu Oct 20 20:25:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Thu, 20 Oct 2022 22:25:57 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> Message-ID: <20221020202557.GA2992523@scaer> Simon, All, On 2022-10-20 18:16 +0000, Richter Simon spake thusly: > Am 19.10.22 um 22:52 schrieb Yann E. MORIN: > > Could you provide a bit more details on how this works? [--SNIP--] > But if a project needs dependencies from other sources, say github, > there needs to be an extra entry for each non-crates.io dependency. > As an example, here is the needed vendor config for conduit - a > matrix homeserver. > (https://gitlab.com/famedly/conduit > rev cb2b5beea8a3fb27ed514ee9e46b5729aa272179) > > [source.crates-io] > replace-with = "vendored-sources" > > [source."https://github.com/ruma/ruma"] > git = "https://github.com/ruma/ruma" > rev = "fba6f70c2df8294f96567f56464a46e3d237a8e9" > replace-with = "vendored-sources" > > [source."https://github.com/timokoesters/heed.git"] > git = "https://github.com/timokoesters/heed.git" > rev = "f6f825da7fb2c758867e05ad973ef800a6fe1d5d" > replace-with = "vendored-sources" > > [source."https://github.com/timokoesters/reqwest"] > git = "https://github.com/timokoesters/reqwest" > rev = "57b7cf4feb921573dfafad7d34b9ac6e44ead0bd" > replace-with = "vendored-sources" > > [source.vendored-sources] > directory = "vendor" Ok, thanks, that helps see the overal concept. I see all the above use git repositories directly, so I suspect this is going to cause explicit git-clone + build (that's OK). However, I was also wondering if one could have a "registry" like crates.io, either internal to a company, or another public resource elsewhere, and how that would work... > > Also, can we have a package that uses non-crates.io dependencies, so > > that we have a test-case to ensure we have no regression? > I'm not sure if i understood that correctly. Do you mean bringing a > package into buildroot Yes, I was wondering if there was a publicly visible package that we could cary in Buildroot, so that we know the feature would be regularly exercised. You pointed to conduit: it wouldbe good to have it packaged in Buildrooot. [--SNIP--] > > Can we keep the vendoring to stdout as it currently is, and re-run it > > right after, just to generate the config.toml file? I.e. something like: [--SNIP--] > While digging around i found the following solution: > cargo vendor \ > --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > --locked VENDOR \ > | tee .cargo/config > > Cargo seems to print all progress output to stderr but not the needed > output for the config. This goes to stdout. So we only have to tee stdout > to the .cargo/config file. I will update the patch accordingly. Great! :-) Please, also note that this has the potential to generate different hashes, so please check existing cargo packages to see what breaks. If we can't keep generating the same archives, then we must find a way to dfferentiate the newer archives so they do not clash with the older ones. Something like: diff --git a/package/pkg-download.mk b/package/pkg-download.mk index 0718f21aad..e247fd38c5 100644 --- a/package/pkg-download.mk +++ b/package/pkg-download.mk @@ -22,6 +22,7 @@ export LOCALFILES := $(call qstrip,$(BR2_LOCALFILES)) # download backend: BR_FMT_VERSION_git = -br1 BR_FMT_VERSION_svn = -br2 +BR_FMT_VERSION_cargp = -cargo1 DL_WRAPPER = support/download/dl-wrapper diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk index 0945e6ed31..7486d12499 100644 --- a/package/pkg-utils.mk +++ b/package/pkg-utils.mk @@ -48,7 +48,7 @@ pkgname = $(lastword $(subst /, ,$(pkgdir))) # Helper to build the extension for a package archive, based on various # conditions. # $(1): upper-case package name -pkg_source_ext = $(BR_FMT_VERSION_$($(1)_SITE_METHOD)).tar.gz +pkg_source_ext = $(BR_FMT_VERSION_$($(1)_SITE_METHOD))$(BR_FMT_VERSION_$($(1)_DOWNLOAD_POST_PROCESS)).tar.gz # Define extractors for different archive suffixes INFLATE.bz2 = $(BZCAT) Note: this is probably not sufficient, but that gives you a lead if needed. Also, we'd need a comment at the top of the cargo-post-process helper, like we have at the top of the git helper for example. > > Finally, unrelated to your change: if the package already has a > > .cargo/config.toml, then we irremediably override it. Is there something > > in that file that would otherwise be required to do the build? > > Yes, i noticed that too. Overwriting a possibly existing project specific > configuration is not good. > I think this also should be changed (in a different patch, as mentioned). Or we can wait for until something actually needs it, so that we do have an actual case to look at. > > Can we simply append to the file rather than overwrite it, i.e.: > > .... >> .cargo/config.toml > > Unfortunately it is not that simple because of two reasons: > > 1. cargo looks for a .cargo/config or (up from cargo 1.39) a > .cargo/config.toml file for configuration. If both files exist, cargo uses > .cargo/config and ignores the .cargo/config.toml file. > > 2. if configuration entries for vendoring already exist in a configuration, > it is not allowed to add them again. Cargo will not build the project if a > corresponding entry exists more than once. > > The first case would be quiet easy to address but the second one would > need some sort of merging. Yes, so that all calls for waiting until we do have an actual issue. > So, speaking for this patch, i would keep the current behavior "overwrite > every possibly existing config with the vendoring information". Yes, because that has so far not caused an issue (at least that we noticed), so this means it is not an actual problem. Thanks! Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From b.bilas at grinn-global.com Thu Oct 20 21:13:13 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Thu, 20 Oct 2022 23:13:13 +0200 Subject: [Buildroot] [PATCH] package/ttyd: bump to version 1.7.2 In-Reply-To: <20221020211313.874624-1-b.bilas@grinn-global.com> References: <20221020211313.874624-1-b.bilas@grinn-global.com> Message-ID: <20221020211313.874624-2-b.bilas@grinn-global.com> Signed-off-by: Bartosz Bilas --- package/ttyd/ttyd.hash | 2 +- package/ttyd/ttyd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ttyd/ttyd.hash b/package/ttyd/ttyd.hash index 283288febf..a2a933b63a 100644 --- a/package/ttyd/ttyd.hash +++ b/package/ttyd/ttyd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 47bc98d43cf2060af06378a2113605b229c46895a391613bdaa5a1197bfe5d47 ttyd-1.7.0.tar.gz +sha256 edc44cd5319c0c9d0858081496cae36fc5c54ee7722e0a547dde39537dfb63de ttyd-1.7.2.tar.gz sha256 8b7e100f8311cb428c57609164d93099bada2599f948359045d1ac876a7a625b LICENSE diff --git a/package/ttyd/ttyd.mk b/package/ttyd/ttyd.mk index 7b582a696c..085511b5fd 100644 --- a/package/ttyd/ttyd.mk +++ b/package/ttyd/ttyd.mk @@ -4,7 +4,7 @@ # ################################################################################ -TTYD_VERSION = 1.7.0 +TTYD_VERSION = 1.7.2 TTYD_SITE = $(call github,tsl0922,ttyd,$(TTYD_VERSION)) TTYD_LICENSE = MIT TTYD_LICENSE_FILES = LICENSE -- 2.38.0 From b.bilas at grinn-global.com Thu Oct 20 21:13:12 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Thu, 20 Oct 2022 23:13:12 +0200 Subject: [Buildroot] [PATCH] package/python-esptool: bump version to 4.3 Message-ID: <20221020211313.874624-1-b.bilas@grinn-global.com> Signed-off-by: Bartosz Bilas --- package/python-esptool/python-esptool.hash | 4 ++-- package/python-esptool/python-esptool.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-esptool/python-esptool.hash b/package/python-esptool/python-esptool.hash index 4f19fbde41..7e523a7027 100644 --- a/package/python-esptool/python-esptool.hash +++ b/package/python-esptool/python-esptool.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/esptool/json -md5 60bf3a49a794ff5627552f642f28ea3d esptool-4.1.tar.gz -sha256 51a41655187780cb802a5827fab68a3db0d6206330560459c55fcf0e222f277f esptool-4.1.tar.gz +md5 973b63eac1391d3491846d8676c783e7 esptool-4.3.tar.gz +sha256 03d00312eef258baf83faefd0b912b2251dd0440242da9dcb1b18fe75ed614c3 esptool-4.3.tar.gz # Locally computed sha256 checksums sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/python-esptool/python-esptool.mk b/package/python-esptool/python-esptool.mk index 51bc563c5c..3f33fd7865 100644 --- a/package/python-esptool/python-esptool.mk +++ b/package/python-esptool/python-esptool.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ESPTOOL_VERSION = 4.1 +PYTHON_ESPTOOL_VERSION = 4.3 PYTHON_ESPTOOL_SOURCE = esptool-$(PYTHON_ESPTOOL_VERSION).tar.gz -PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/bb/d5/9d000803520b68fd9f6447cd7c15352a79984196f57f0519839b0f80fb8f +PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/5b/d7/0dae311a94a490d7b7af2f4fab079b34f6244c6129017997bc994f7b360b PYTHON_ESPTOOL_SETUP_TYPE = setuptools PYTHON_ESPTOOL_LICENSE = GPL-2.0+ PYTHON_ESPTOOL_LICENSE_FILES = LICENSE -- 2.38.0 From thomas.petazzoni at bootlin.com Fri Oct 21 05:48:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 21 Oct 2022 05:48:52 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-20 Message-ID: <20221021054900.8640783EAA@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-20 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 8 | 1 | 0 | 9 | 2022.08.x | 8 | 13 | 0 | 21 | master | 142 | 251 | 15 | 408 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 17 host-f2fs-tools-1.15.0 | 17 glibc-2.36-44-g2628500f5dff... | 16 libnss-3.84 | 15 brltty | 14 host-sentry-cli-1.59.0 | 14 efivar-38 | 8 igd2-for-linux-2.1 | 8 libarchive-3.6.1 | 8 btrfs-progs-5.16.2 | 7 host-go-1.19.1 | 7 systemd-250.4 | 7 dash-0.5.11.5 | 6 host-pahole-73383b3a39afe86... | 5 libgpg-error-1.45 | 5 sysvinit-2.99 | 5 gensio-2.5.5 | 4 host-binutils-2.38 | 4 perl-5.34.1 | 4 xz-5.2.7 | 4 autofs-5.1.8 | 3 dahdi-linux-5c840cf43838e06... | 3 file-5.41 | 3 host-binutils-2.37 | 3 linux-6.0.1 | 3 lxc-4.0.12 | 3 fs/cpio/cpio.mk:117: /tmp/i... | 2 host-gcc-final-10.4.0 | 2 host-gdb-arc-2020.09-releas... | 2 host-rust-1.64.0 | 2 libabseil-cpp-20220623.1 | 2 linux-pam-1.5.2 | 2 linuxptp-3.1.1 | 2 open62541-v1.3.3 | 2 openpgm-5-3-128 | 2 traceroute-2.1.0 | 2 ulog-0389d243352255f6182326... | 2 unknown | 2 ace-7.0.6 | 1 afboot-stm32-3566acd582e553... | 1 apcupsd-3.14.14 | 1 bat-0.19.0 | 1 batman-adv-2021.4 | 1 boost-1.80.0 | 1 cryptodev-linux-1.12 | 1 dhcp-4.4.3-P1 | 1 dmalloc-5.6.5 | 1 elfutils-0.186 | 1 exempi-2.6.1 | 1 fontconfig-2.13.1 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubi/ubi.mk:51: /tmp/inst... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 gobject-introspection-1.72.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.39 | 1 host-gcc-initial-11.3.0 | 1 host-runc-1.1.4 | 1 kmod-29 | 1 libdeflate-1.12 | 1 libg7221-dbfc29d4806ecdace5... | 1 libglib2-2.72.3 | 1 linux-5.10.145-cip17 | 1 log4cplus-2.0.8 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 nodejs-16.17.1 | 1 pcre2-10.40 | 1 perl-net-ssleay-1.85 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 poppler-21.12.0 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 stress-ng-0.13.05 | 1 tcf-agent-1.7.0 | 1 tealdeer-1.5.0 | 1 uccp420wlan-6.9.1 | 1 uqmi-0a19b5b77140465c29e2af... | 1 vlc-3.0.17.4 | 1 wolfssl-5.5.1 | 1 xenomai-3.0.10 | 1 xfsprogs-5.14.2 | 1 xxhash-0.8.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- x86_64 | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/bbb8ece5f48ce299d523e1fb2a1b13cac1876080 | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/e9d07d3f53bae1a40faf0d8d65edacd87abc66d4 | sparc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/18f11a29b8bdd6f1e09124b72e003df9ca292b65 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4c3edf71897b4786c7cbe35e7c2857f38869df6a | i586 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/aa29f52145e9554ee82915b83785677ee4565777 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/16b6dff41f9103c70cdbed4e200f31f730803716 | mips | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/a03d142b78e2dcb23cf64aab1364a4b80baeb046 | sh4eb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2a643ecde68ea487203aa7e18c2bfe785bfd8e83 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/77e615ce20ad8878147dc7f3a5ef0122561aee21 | arm | brltty | TIM | http://autobuild.buildroot.net/results/b12e6f29fea51d26be649d505414d4c0530a93fd | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f5a3fb0555ca3771dd6436f47f91ce8c97d63f06 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/54fe1df4700a5ab7fc3ba2b39d42da32142a76d0 | arceb | brltty | TIM | http://autobuild.buildroot.net/results/8d8fcb7d4f36e2c78c3427e1b3c603b7263dc499 | s390x | brltty | TIM | http://autobuild.buildroot.net/results/85f189edfd372fa7d00aced5151ff1ce543ce211 | riscv64 | brltty | TIM | http://autobuild.buildroot.net/results/871103e26ef4b64793b910757d4b1026d485e5b8 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/c6825b654d8996793a1db3a90ad4c7f038b06f2d | s390x | brltty | TIM | http://autobuild.buildroot.net/results/90b06d662d5837a552a0c50aa144adddd416470c | microblazeel | brltty | TIM | http://autobuild.buildroot.net/results/c8340dcbf684f0784352729d2fe9acdeaae3cd33 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/950c284b3cff4d6dd3e03ac851286af2df20c1c7 | arm | brltty | TIM | http://autobuild.buildroot.net/results/f5aa923c4aa07ebd16e61e6cd481d4aea8867126 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/ce367e70d8f2410ea693c54842a872e9a53e0dfe | or1k | brltty | TIM | http://autobuild.buildroot.net/results/337a7d66744b911941577bac8787a28a77d27924 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/092b5be3b452333a7ef84d4b203919b25d4b62d7 | s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/807bb336cba53aac33ab650d9725704c2f4ace3f | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/f7df0be03f4a0c4d8d73a586aad9cfdd95176a8e | ORPH sh4a | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1a57344b588e5dba4fcf3c6e5e1896fe87e9bee0 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ee57bc714abc76f559cdb9af5896e3c24d01bca3 | ORPH microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c60e7876565a617d3cbcdc4fd18228f4c6d4c92c | ORPH x86_64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8abccb416d2280f87e6d8b4a3e5d8a0e687fa9a5 | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4db8d0353d285dec7db3106a73883f10d6b9dfe1 | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3192a4c06caff2d8644ef68a515132ef46d5b7b6 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d322853f628fbe1058756863151dc797f49d549e | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/55ab224e934d6e945b43541b4d2d2ab0cc916a40 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8d58b09928f130880f46caa01df577f948196451 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9c83918c20b648f5e86435560c8072925149a7e7 | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e0d4748f048b79c1eefcce2822ddd2ca11a379be | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/33ad5c2ea1625e35149f62efec7fa10831aef44f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/967b0a9d56f7a3052d5b0e45ce5533800e2acff8 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0a1ce9544231776ba5060fd09e947ce155dc8d0d | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/683d4caa58f7134c131bf830278d7b06c014c942 | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8f1739a5ed3891067dbce8cc6b8ce9a204eb3d7a | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4346ea316ab6a49a8a916109369e227dc3d7f5a4 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/71f83e3f271336a30fc1ec4586fa2af09b8c8cc9 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e21d8db473f5f07445352947401dde1f1e93bc89 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ffd46761a9385b21cbf0c27462a77caac44789a2 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b4c4e4f0556eda282de3d92776dbd4cf6cb1bd6f | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f10b4444cc78e740427aa0dc56ef851a9c43c490 | mips | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/1d996fa82b113754651b645ad0f0667c653350a5 | ORPH microblaze | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a0047f623bca65d3cf0e3babb4e11c0bc91bc77a | riscv64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/540f72f17727f219ac3d63c5a004638eae9f69c6 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/b025f40e9d3828166c3c377e614a279ee6716914 | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/3612b02787897bcd45e5662077eaee6e2ae7566d | ORPH armeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7466fc00e13fdeeee0fb66f196a4b74a17d57a40 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f464fb53cc908631ef36d512f14398424bdf7376 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0b889dd99e3f63b2d671af3afdff623e1822e697 | ORPH s390x | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/2e12568c73a7b8a48837efd3dccd89dc53f07ff7 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0ce57951d120d4c53fc920528d5cfcfade288744 | ORPH sh4aeb | dhcp-4.4.3-P1 | NOK | http://autobuild.buildroot.net/results/7170d7345ff87a22d023e1c78a464f9883275e47 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/7f7e4a3a82056b369721674a496a6b7585da167c | ORPH mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/3f55304506c335ccb7caba22f9a476a78919e761 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/da98cd951e3feb4a7f877aebb5aaec19663cbbd6 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/662527c274eabcabcc572e4f51ca22f8a465ab2d | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/3de0b0524a99e2b98c1905d32e4630000d3b4128 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/20b4c88a131a848bc7ee06fa63f7edb7b1255b69 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/ef732debf1178beda3ca167da94e98194ffe7672 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/99f91a750869c98adb02020cb1c716e1d390e2e0 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/711828b511cd726513206e3054f8d79ec2cfd465 | arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5d3e2119589245262e64b90e72970aeeee0a29f6 | ORPH arm | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/c4eb7aa001ce2efbb184876692b1b869797e29ee | mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/0967265f5c9f112c42a55e7291bc6f7e0b49df7d | ORPH arm | file-5.41 | NOK | http://autobuild.buildroot.net/results/e43625faa5183b885fc9f3da3a3e38533611ba92 | ORPH mipsel | file-5.41 | NOK | http://autobuild.buildroot.net/results/5d592702b1282961945953cc03c5e12cb47c2e10 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/d55e15065b5cc5c11dec8bd79cdc2d7268744eff | ORPH arc | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/b3d9de3c964d9462c2c3d18363802496004826ea | powerpc64le | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/6dbaaf76c0469d70881e97c03b5afc1d93a49583 | riscv32 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/397d7d1cd5cac563417b537b92bb26ed7390399a | xtensa | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/9b7517f5efd527cc2396c634cbc86698e413933b | arc | fs/ubi/ubi.mk:51: /tmp/inst... | NOK | http://autobuild.buildroot.net/results/3fbf2c4d0e778f8b38710f2d5f6480020d9bdbee | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fe6327b0275fc6ca35ea6a73051cd9e5c6783887 | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/fba1de3529e70e85d44935f4f96123bf081955a8 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/2c9f9cd066f21b9dc18b3af309fef9060a12960e | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ecd1be0af19fb595a3d34c8b4f9b1a1667068d9a | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/12127d54384ac65b0f2757e56ef861af734b9806 | mips | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/ff774b108d7d671504b05caa5d8f83255c20fdab | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b07ef13606c198455563d9a7e13677af6b4c2684 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a71aa55a4c820e23136dc25cb887683cba7a3759 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/478e31d69232ed136293dcd5eabbba890a6a1614 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00345f218ef90fcef86c7ec5b7ad8666d3fd1d1d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dca0e02616865ef5eea6d824b8eccba943547933 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3c4d825353994e091c220576ce3ce997d81b9754 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4de103b3eaf05cffa2befb7fe3b7f37088d19c39 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3dbe56462e308dec5305e8fcd5805676f5f4e3c3 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d44e2132b1ad62dc105921b2bd21a28f3e78d03c | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/bc0f9424db1e70bea76deaf6f9990efb2849900c | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c2d8b40a37efed240bdaf43e427ad609ed779118 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/672265c96ca499187c8b6adb98015d0453a4f45c | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eb3f90c9292c9a2ed8956068b8be37191c648227 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6cf5d3ff88b1cd7572b87fda2216f2edf65ede89 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/18c334e25afd59259318819fcf89572955594b17 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/c720fe83335b01c29ede4da05c5e6ba856220319 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/d94fec13b4d861d208fdd52e04720e5b56bebef4 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/c8caec2370d3d3cd90682659118a799596e025a8 | ORPH microblazeel | gobject-introspection | TIM | http://autobuild.buildroot.net/results/40481abc54f021cf28242623d86ffebb3fbe81df | microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/64b8ed9bd4f31a964f2b4e6f2835ef0a56e004e6 | ORPH mips | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/d422bf0ea065e0b1053f6e50b665f53e7851297e | powerpc | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/4a214ac239f1dbfd904d5abc9e33e5dbc5479fce | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/3b9aa02532f942683cd669d98442250c27406bf3 | sh4aeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/71fa2e167b33eecb1dba5933f7a52cb89cbda65e | mips | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/a69ecd473c32f3fdfc6d8f8f48d34411b99354a7 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12d96e3ef902ff89d815d43df93ee089a605bb19 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/505fa4a3086e4d6acc01a64eda7570a915b661ff | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c979e1c39d01152ae0776ea4d0ac4ce2e2ff877c | arc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/25b9dc0212d07eac2adc6e8d0156dfa1a9f88c61 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/91ea9a771e91b409ed7e2a17979ef842a8acf56a | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d41171a4446c3ccae8cd88c36abfc1f3f771eb21 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/da79f6433242e1f643f90aae20360621e74090c2 | m68k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3feb3ec722703e50d7dbc42bcc893b9cf5ab2f7c | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4ec263f33faebf74348e8418b082fc25ad524246 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e96672e638003f0bea2651c79388e9915389abf | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/266f90c7c77ef6994e0921fffcf3cb4990bae67b | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d55106f7b03c59d6354db20ab30339b30d24ff01 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/aeb53a2c4c1ac608e10c905a53ee4ad008501060 | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cad92dcfb31567ed8e2f1fa981ea9f6e6ab1786 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/f8f2f9ff0b89905864de91cbbaee521ca2534245 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a473b8fc19c38b72accf64dddbd4e78a4858083a | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/21b7a7ac397f1cb19fe653db0ccd496726c470a5 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b41567cb3418103197dc4789d4ce0145aa5fa5f0 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/184739d4eeb66ec6f9da0e8a09ec54a551c51bd0 | sh4eb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/60f684137aa6031f10a84a45d28340a63943f793 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/eba2e3b8a8e815ef69e651fc6b19ee32093b9bea | microblaze | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/98138a46c3b618385c702f9bb5faa6418ca61631 | s390x | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/161aa81ec178493a7cd5b650dadacb58c50d98bd | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/77fc2075ac5094f023100b3c648d624550619167 | arc | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/a10a4bae87df204401431a4a075c55721c1533a6 | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/5ff119f89d0592eaee5f3034700d722609bd00df | ORPH mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9dae5bab40474d62a39983bbc132f0f279449bb1 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6c70a5dfc2909322f759ecde39a63d4dd2f2b4c0 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/127f6ed56523af84d85151b72d99d2587a44faa3 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/68cc9b15f3594acb7ea117617ba63f77de4f7fb5 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/3377ac72a40a1fdc0d7e84d4d30382f6fb3dfbc8 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dfc6398e21543ba37341989b2844abdac88ca487 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5b6de0a073c076cfd54444c259e2796ca88814e1 | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/88fcc4d7e54eb81943df67dde330b3bd42fc66ff | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/fa3efa1bba478f1cb91f884fa42af0d335920d07 | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ed6a011f0e185bdf970282a4e9d9151ca88efc88 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8dc39b231738028e22673e53960986e0e4796cd8 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/2191c341b01b01438fdbaf92f6ecbae4f7eb7d9a | arm | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/25ad35dd4a295b333ac5bfe19230a5651c604abc | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/5d64ab1333074ec773b0ac157d0fc5b8dbce2e66 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/77e43b58640f9e7360710bd04b0eeb9dd22d8fea | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/020d6a3f9df653c8ab67003c5ff5b19c059e2fda | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c2ebaeda26680473956ae7b1775106686e351c1 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a3124ef89bf1c213d242704ce0ebe1cd61960cb2 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8a2357fd1e9563c1e55067ee3f01bd15939f4b6d | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/88ac753c406a46e684600d584d74da5afdd0ba2c | sh4aeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b50cbd5d145ff54c7fe21413514a144b06b32247 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/39d2d7404ad079930c98aaab6330188151c09926 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/3c9c8cd695492205873c0a71dc7a931c08c3f0eb | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/2d77870dc81fe8977b02caa911d0f875cfe0704b | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5c60aebc29f95aad7e5d5eae235069054633e083 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a1fde91481f1db2b20c3adaa883251b18811a2f5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/686d21a51593d54cfbedb5b1e3f803301c8c9fff | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b8aacfa03c18c7164cc5200cccc6f0d92ef129ba | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8bb899ca3cfa31bceab45e7d5b71d960bfba6235 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/23b19f55bde324cfc4a73c77059fb6006e7c85bd | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ffc5e6bf1b83ac8c36efdffc528b04bcad41d383 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/54ad3ffa307b969a16b662bb4ce68b1edf30fe4d | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/13052a52aa3d251aa7cbe76cafb5ae30466fe2b7 | sh4aeb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fec563e51b09edebf21d1cc8d4865873272a93cc | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c1eb89d07d76e896b7dea6078a5ad707b63d7ef6 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6b17f73c98fcaf7e6db4146237f759cde47bfb66 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c7a9e793e07c32678e7240700f2c289563d97b93 | armeb | kmod-29 | NOK | http://autobuild.buildroot.net/results/e5bdd8a04d845667f4234867625c3d8e482b3e21 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/54ba419e9a395b3397a31dbac624686ed8c23c97 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/3a2088e6a9511437696aaf604e9e7a0480941885 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/496f1455eca76e3c25ab40f05f82cf7f3930f41c | arm | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/ff3adde0bc617a5e0c709eaba6f904f61c384487 | sh4aeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/35293170afdad574fdbabf4ca317826643aabd0a | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cd727150088b801ea630c5db65b918266690eddc | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d001c552082b5cea1d58da24b2d6fad676b8f73b | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/24ad8dbdae9e58016f0cd849d56004abb79b0446 | x86_64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9dd8462de339ba04cc5b7828b3501de533ae55d0 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/eea02541c36f9f342a640808c4dd434aff945c20 | microblaze | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/658207f906337f1b2acf1e77403263a1d3639de1 | powerpc | libg7221-dbfc29d4806ecdace5... | NOK | http://autobuild.buildroot.net/results/39fb17691dcbdd34f6850451c29c3ba0d2385ef3 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/544730b0c72f398f81e69a74c8441777d181e0a5 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6de051b3f1a48e2bad89d058707e2f3f213f81b8 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/a41f670ac2f569e004996f6a1f9b4665bfca09df | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2b9d050129d792c5ac302b4b676db95d23a35b48 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/d50ba2058d4deb3cd10ba9d8a0b9c6effc862a5a | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/5cb557517567723dcd3401470b96d58935886cda | ORPH arm | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/87017ffc3d8830895bb711dc571e3f25bac60ab2 | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/cd40d43ec039a92b9ec78fe5a4470a4f710315ab | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e584fa108007f02a91c7e98bd2ec626f647db86d | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2344c8ff628044bf59d1383927dc71df924a5739 | sh4aeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8624e353ba197666dbd1126b95bd8615e6ca0c52 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ce9484c822024aaadd4a04d2819bf75a0c12c8b | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2b3e86e9bf1b834adc1853cd45d07549e10ebf33 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/71b01cdba5987edfeebb5d51d01621b8d1532307 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e0d87bf16ff35d534e178f645483e7af89328b55 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e0c78e59eab0d253cc3b417d7a0dce5f697a8b98 | sh4a | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/812e9effda1c64c6be3d0e22bf122f7304fb468b | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7dbbed8c14a8bc9f3fa80d7b0d984bb1750f10a5 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/84978fee7bdebd660fa3c664067585833a72f3d5 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b91dd6d2c3fe8a32ad33e9f4d2b75e47ab799ece | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2c8f4713e3c22d6b4538b8babc3b9f1702821610 | arceb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/0ec73f00c3eef70817e9974523eecdf43baa1bb3 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/94e42938a868b9c02fd25af1a326681ef4c9eff3 | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/801caa443816428d779cd715c3b3868db8e09bf7 | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e3bb2c9b8c8f96b4b6e1d2c17db598ffcb57e222 | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/e106515860eaa89f2d8296bcc703a4b37c87c90b | ORPH xtensa | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d4adb2f659085c329e948fee4c12475b42984ac | ORPH mipsel | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/bfc525e6f5dcdabe003c6f7d0223b5f89eed8c02 | sparc64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/50516b95f5a9d90d26f1ce022d25349ccd3fa796 | or1k | log4cplus-2.0.8 | NOK | http://autobuild.buildroot.net/results/01bdb21462d315229cc0a1529a1d207eeda6f262 | ORPH sh4 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/02cec4c9a33f29ac584653b856f3569da0269309 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/626da8961851e08f0721237428541a5735f80dfa | microblaze | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/da203deb2617e2d32a4f3b0c433c55bab9f94469 | x86_64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/084c50eb26dc09213c28134a98a25e5d4c2c0fc6 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/1adc41e2aa9e8902f871f83fb46097b7759c6bed | ORPH x86_64 | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/4f29c5e663b5d01af20d671baf6504332b8c1f7b | m68k | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/8ce521a3020268fb780e079147d60ab9b364e96e | ORPH sparc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/55c6109a553a7adc1843c89cec8f015e02d085f9 | ORPH mips | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/144659a7f6678fca543d017e1595897c91379374 | aarch64_be | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/46f76d1893d42d74443d5b7b0145566d6b271a6b | powerpc64le | pcre2-10.40 | NOK | http://autobuild.buildroot.net/results/50b0f8bd22853c1852ed718328606addf7753134 | ORPH arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7b4dc1a5c14073bf683e24bfeb2510f76b33864c | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/54360d104bcfa5bbeaa2fbba0a52c4bf61251dce | aarch64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e45ee1d38d1f72b2200b35bda0f69dbe25e1b3e2 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/456c0d26f539a676221868058689c920b04a1e5c | mips64 | perl-net-ssleay-1.85 | NOK | http://autobuild.buildroot.net/results/fe94e967da34c7e88c3426647b1730c675b34d70 | sparc | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/14264013b74ee6161ae27189adb2894c7e326fea | ORPH xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/cb32cd5232cb8e2632854af79a5252c5977ba214 | riscv32 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/40779f5abb10d0f59a919d6207918714131cdb71 | sh4aeb | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/c7b08c10b407b12183d3366a6047a401ad7f5c9a | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/380a64dfa48b020dbc3d3c1be111a5d5afedde15 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/347af4dd30f61835f1cfb04a4ade9b937e40ee43 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c79ffe229b5d7c60f368d30e4c95dac4153d4ec6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6e442d500e6bd38c69a74b6264a51842fe01d756 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a375d27e5fe965a1ad7730f51eb10f5cea9a31b5 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0d529cc2277e93db15e51b97d0e843dd11d63b27 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/07565092a360991f88e4e68d0291f4e7ad561165 | microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6e7ce6e307ca36f93021944b4d2354318e83eedf | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/9082b9e79667e4ecc9140a81566fbc05f869a13d | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/910462427aa30ab7fa52dc84cd7763d064596bf9 | ORPH sh4aeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/31fae9c858be2beb69d0bf534dc88cf6ff58b48b | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/961028e5cc3db24c1ca954ce0507683bcd11d24e | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/731aaed149d9ab334e5603c831daffffd49b57ae | sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/890f650043d0e911c4042bc6d7625a4d4db8bbee | microblazeel | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/b692cd361263c3b9797ee6e1d0d17c3360a4da10 | aarch64 | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/189c7b7ad74cf35f11ad65684c3705b24a04163a | arceb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/dcc8f9dfcf65cd93f328a101e47424e34ea920df | ORPH sparc64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/c35d6f05fcd60f0aefe2f98c72c6054ee68e6e9c | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/4c15633dbee2100f3266b95144284560502e935f | or1k | unknown | NOK | http://autobuild.buildroot.net/results/c92f79f51381b116b7cc77c946795e9057e3ac1c | arceb | unknown | NOK | http://autobuild.buildroot.net/results/e2c5d53ecd9025a93c097fb13dc7d3479f41c7d4 | sh4a | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/3054a7f70ab8903403592a842fa4155f005484bb | ORPH arm | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/40cb178ae900aefe755b0a40ba258f939d526e0e | mips64el | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/b2aa8d5204b5295dc123657e11ed559e3a5a8d5c | or1k | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/819dc71268ea0344e527ecc2c26c12154f40486e | armeb | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/15fe86d5bc253f206aa54e0ce3f4cc6f0f540dfe | ORPH microblaze | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/d480378bfc172c7196e2980b3921420036391364 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e2029d5adbc676209c2ed15dc796234eb4a9266f | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/811e8348f42c86777e92805b0092c383ab5f3aa0 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f2e6cbf56dfea8b07b7c4fe6073035649eac8b5a | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/444fbb51d19c75ff6607d401ebade9d60d9aaabb | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- ndisc6-1.0.5 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | ndisc6-1.0.5 | NOK | http://autobuild.buildroot.net/results/7ad5dc9e0d517cfd13cdd52976451ca74c03759a | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-go-1.18.6 | 2 openssh-legal-info | 2 /home/buildroot/autobuild/i... | 1 host-rust-1.62.0 | 1 libglib2-2.72.3 | 1 luvi-2.13.0 | 1 mpir-3.0.0 | 1 open62541-v1.3.2 | 1 quickjs-2021-03-27 | 1 unknown | 1 wavemon-0.9.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblazeel | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b8538bf4bc3ba2632ba62f7735272d789cb7fb4f | i686 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/767ea17e4a10dc3e6e3b857713ce8faaddbabe84 | mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/e555b15b9c672211bea97c1b57d088995a9246d1 | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/a082c2fecf9ecf161015910fe7bab110df239762 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/06674219e8c4143fa7455be08842585c5493d40d | mips | luvi-2.13.0 | NOK | http://autobuild.buildroot.net/results/fa4f31d728cab8b5234ecdb86dbd0612baa390d2 | ORPH arm | mpir-3.0.0 | NOK | http://autobuild.buildroot.net/results/4c89e81b6439e62925424c31368c88049be5f7b1 | microblaze | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/b9cfafdd59d5dc63d1ac231813d174120a4c6e19 | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/39ddcfd5b7f6565854a1dfbd10f62d00ac00fa54 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/e470d130353dd183a7315660c2f3e816e8dd2561 | ORPH microblazeel | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/21b2bc43c3711e792ff9201ebe4bec1175f54b9b | arc | unknown | NOK | http://autobuild.buildroot.net/results/4ce3459bb64d906928b56c37ca6bff9777b674d8 | s390x | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/c4fcdb0f753150c30e50a316bc51e4a76a1021fa | ORPH -- http://autobuild.buildroot.net From moritz at h6t.eu Fri Oct 21 06:48:18 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Fri, 21 Oct 2022 08:48:18 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> Message-ID: <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Am 20.10.22 um 00:12 schrieb James Hilliard: > On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > wrote: >> From: Moritz Bitsch >> >> The cargo --release flag is used to create optimized builds, not supplying >> --release has major performance implications. > Is there an env variable we can use to set this instead? > > Some packages use cargo without the cargo infrastructure, for example > we have a number of pyo3(https://pyo3.rs/) based packages that use the > cargo env but not the cargo build commands from here. I could not find any env variable for switching profiles. I had a look at python-rtoml, and the used setuptools-rust: supplying --debug to the "setup.py build" removes the --release flag from the cargo invocation. >> Signed-off-by: Moritz Bitsch >> --- >> package/pkg-cargo.mk | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >> index f7e3f39503..e0556252fa 100644 >> --- a/package/pkg-cargo.mk >> +++ b/package/pkg-cargo.mk >> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >> $$($(2)_CARGO_ENV) \ >> cargo build \ >> --offline \ >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >> --manifest-path Cargo.toml \ >> --locked \ >> $$($(2)_CARGO_BUILD_OPTS) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Fri Oct 21 07:44:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 21 Oct 2022 09:44:18 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221019215741.2854410-1-oguz.ozhan@mind.be> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> Message-ID: <20221021094418.2f6ecae1@windsurf> Hello Oguz, On Wed, 19 Oct 2022 23:57:39 +0200 Oguz Ozhan wrote: > Signed-off-by: Oguz Ozhan Thanks a lot for your patch series. However, all commit logs are empty. What is the rationale/motivation for the changes in this patch series? Why is pytest better than nose2? Could you send a new iteration with a detailed commit log for each commit that explains the motivation for the change, and also describes the change itself, especially in PATCH 2/3, where test cases see changes. BTW, these changes in test cases could be done in a separate preparation commit, as they would still work with nose2 I believe. Also another concern is that the series is not really bisectable, but admittedly I'm not sure it's easy to achieve without doing all the changes in one single patch. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From b.bilas at grinn-global.com Fri Oct 21 08:58:58 2022 From: b.bilas at grinn-global.com (Bartosz Bilas) Date: Fri, 21 Oct 2022 10:58:58 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2022-10-16 In-Reply-To: <20221017053654.7D60A1BBFC4@server220076.nazwa.pl> References: <20221017053654.7D60A1BBFC4@server220076.nazwa.pl> Message-ID: <51bbccf8-bbc4-91d5-95eb-56ce8b077d65@grinn-global.com> Hello Thomas, On 17.10.2022 07:36, Thomas Petazzoni wrote: > Hello, > > Outdated packages > ================= > > This is the list of packages for which a new version has been detected > and for which you are a registered developer. Please help us improving > the quality of Buildroot by bumping these packages to their latest > version. > > name | found by | link to release-monitoring.org | version | upstream > -------------------------------+----------+----------------------------------------------+--------------+-------------- > python-esptool | DISTRO | https://release-monitoring.org/project/11619 | 4.1 | 4.3 > ttyd | DISTRO | https://release-monitoring.org/project/13890 | 1.7.0 | 1.7.1 here you go: https://patchwork.ozlabs.org/project/buildroot/patch/20221020211313.874624-2-b.bilas at grinn-global.com/ https://patchwork.ozlabs.org/project/buildroot/patch/20221020211313.874624-1-b.bilas at grinn-global.com/ Best Bartek > > Thanks for your contribution to Buildroot! > From oguz.ozhan at mind.be Fri Oct 21 09:15:29 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:29 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile Message-ID: <20221021091531.2989489-1-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 Signed-off-by: Oguz Ozhan --- support/docker/Dockerfile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile index f54c31b54a..fd1527b1f9 100644 --- a/support/docker/Dockerfile +++ b/support/docker/Dockerfile @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ mercurial \ openssh-server \ python3 \ + python3-pip \ python3-flake8 \ - python3-nose2 \ python3-pexpect \ python3-pytest \ qemu-system-arm \ @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ apt-get -y autoremove && \ apt-get -y clean +# To be able to run tests in parallel +RUN pip install pytest-parallel + # To be able to generate a toolchain with locales, enable one UTF-8 locale RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ /usr/sbin/locale-gen -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:15:31 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:31 +0200 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221021091531.2989489-3-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 - Changes in this patch: - the sed command was fine filtering the tests list with nose2 output but removing all operating on pytest output. With pytest no fine filtering is required to get the test names in correct format. Signed-off-by: Oguz Ozhan --- support/scripts/generate-gitlab-ci-yml | 2 -- 1 file changed, 2 deletions(-) diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml index aa43aac019..bb4dcbbb22 100755 --- a/support/scripts/generate-gitlab-ci-yml +++ b/support/scripts/generate-gitlab-ci-yml @@ -31,7 +31,6 @@ gen_tests() { defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort) ) @@ -80,7 +79,6 @@ gen_tests() { ;; (*-tests.*) runtimes=( $(./support/testing/run-tests -l 2>&1 \ - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ | LC_ALL=C sort \ | grep "^${CI_COMMIT_REF_NAME##*-}") ) -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:15:30 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:15:30 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221021091531.2989489-2-oguz.ozhan@mind.be> From: Oguz Ozhan - From web page of nose2: (https://docs.nose2.io/en/latest/) nose2 vs pytest: - pytest is an excellent test framework and we encourage users to consider it for new projects. - It has a bigger team of maintainers and a larger community of users. - pytest is more robust and has more ability compared to nose2 - Changes in this patch: - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests - nose2 plugins removed which are not required anymore - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest Signed-off-by: Oguz Ozhan --- support/testing/conf/unittest.cfg | 3 -- support/testing/run-tests | 28 ++++++++++------- support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ 3 files changed, 36 insertions(+), 35 deletions(-) diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg index 4f516fb80a..0dfffcfbda 100644 --- a/support/testing/conf/unittest.cfg +++ b/support/testing/conf/unittest.cfg @@ -1,5 +1,2 @@ -[unittest] -plugins = nose2.plugins.mp - [multiprocess] always-on = True diff --git a/support/testing/run-tests b/support/testing/run-tests index bf40019362..f887bc6715 100755 --- a/support/testing/run-tests +++ b/support/testing/run-tests @@ -4,10 +4,16 @@ import multiprocessing import os import sys -import nose2 +import pytest from infra.basetest import BRConfigTest +class PyTestCollector: + def __init__(self): + self.collected = [] + def pytest_collection_modifyitems(self, items): + for item in items: + self.collected.append(item.nodeid) def main(): parser = argparse.ArgumentParser(description='Run Buildroot tests') @@ -42,12 +48,10 @@ def main(): BRConfigTest.logtofile = False if args.list: - print("List of tests") - nose2.discover(argv=[script_path, - "-s", test_dir, - "-v", - "--collect-only"], - plugins=["nose2.plugins.collect"]) + collect_plugin = PyTestCollector() + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) + for nodeid in collect_plugin.collected: + print(nodeid) return 0 if args.download is None: @@ -106,15 +110,15 @@ def main(): return 1 BRConfigTest.timeout_multiplier = args.timeout_multiplier - nose2_args = ["-v", - "-N", str(args.testcases), - "-s", test_dir, + pytest_args = ["--workers", str(args.testcases), + "--rootdir", test_dir, "-c", os.path.join(test_dir, "conf/unittest.cfg")] if args.testname: - nose2_args += args.testname + pytest_args += args.testname + + pytest.main(pytest_args) - nose2.discover(argv=nose2_args) if __name__ == "__main__": diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py index 692291267e..d2390cccf1 100644 --- a/support/testing/tests/fs/test_iso9660.py +++ b/support/testing/tests/fs/test_iso9660.py @@ -25,7 +25,7 @@ BASIC_CONFIG = \ """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): img = os.path.join(builddir, "images", "rootfs.iso9660") if efi: efi_img = os.path.join(builddir, "images", "OVMF.fd") @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): return exit_code -def test_touch_file(emulator): +def do_test_touch_file(emulator): _, exit_code = emulator.run("touch test") return exit_code @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): """.format(infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): infra.filepath("conf/grub2.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) self.emulator.stop() - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True, efi=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=False) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 1) @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): """.format(infra.filepath("conf/isolinux.cfg")) def test_run(self): - exit_code = test_mount_internal_external(self.emulator, + exit_code = do_test_mount_internal_external(self.emulator, self.builddir, internal=True) self.assertEqual(exit_code, 0) - exit_code = test_touch_file(self.emulator) + exit_code = do_test_touch_file(self.emulator) self.assertEqual(exit_code, 0) -- 2.34.1 From oguz.ozhan at mind.be Fri Oct 21 09:18:06 2022 From: oguz.ozhan at mind.be (Oguz Ozhan) Date: Fri, 21 Oct 2022 11:18:06 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221021094418.2f6ecae1@windsurf> References: <20221019215741.2854410-1-oguz.ozhan@mind.be> <20221021094418.2f6ecae1@windsurf> Message-ID: Hi Thomas. Thanks a lot for your comments. I inserted more information in the commit logs and re-sent the patches. KR. Oguz On Fri, Oct 21, 2022 at 9:44 AM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > Hello Oguz, > > On Wed, 19 Oct 2022 23:57:39 +0200 > Oguz Ozhan wrote: > > > Signed-off-by: Oguz Ozhan > > Thanks a lot for your patch series. However, all commit logs are empty. > What is the rationale/motivation for the changes in this patch series? > Why is pytest better than nose2? Could you send a new iteration with a > detailed commit log for each commit that explains the motivation for > the change, and also describes the change itself, especially in PATCH > 2/3, where test cases see changes. BTW, these changes in test cases > could be done in a separate preparation commit, as they would still > work with nose2 I believe. > > Also another concern is that the series is not really bisectable, but > admittedly I'm not sure it's easy to achieve without doing all the > changes in one single patch. > > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.richter at ptwdosimetry.com Fri Oct 21 12:10:58 2022 From: simon.richter at ptwdosimetry.com (Richter Simon) Date: Fri, 21 Oct 2022 12:10:58 +0000 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: <20221020202557.GA2992523@scaer> References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> <20221020202557.GA2992523@scaer> Message-ID: Hi Yann, Am 20.10.22 um 22:25 schrieb Yann E. MORIN: > I see all the above use git repositories directly, so I suspect this is > going to cause explicit git-clone + build (that's OK). However, I was > also wondering if one could have a "registry" like crates.io, either > internal to a company, or another public resource elsewhere, and how > that would work... It is possible to use an own registry, yes, but i did not use that yet. However, i checked the code of cargo vendor and have seen that alternative registries are handeled. That means that `cargo vendor` should print the needed config and we would use it with this patch. As i have understood it so far, a corresponding entry would look like this: [crates-io] replace-with = "vendored-sources" [my-own-registry] replace-with = "vendored-sources" [vendored-sources] directory = "vendor" > Yes, I was wondering if there was a publicly visible package that we > could cary in Buildroot, so that we know the feature would be regularly > exercised. You pointed to conduit: it wouldbe good to have it packaged > in Buildrooot. I can try to do that. But that should be done in a different patch i think? > Please, also note that this has the potential to generate different > hashes, so please check existing cargo packages to see what breaks. I did, and with my last suggestion (using cargo and tee) those packages broke. The problem is that `cargo vendor` outputs a preceding newline that must be removed. I came up with this: cargo vendor \ --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ --locked VENDOR \ | tail --lines=+2 | tee .cargo/config This removes the first (and empty) line. With this, all packages i checked were fine. These were: - bat - dust - hyperfine - ripgrep - tealdeer - python-rtoml - python-orjson - python-cryptography - host-python-maturin I hope i've got all. > Or we can wait for until something actually needs it, so that we do have > an actual case to look at. > >>> Can we simply append to the file rather than overwrite it, i.e.: >>> .... >> .cargo/config.toml >> >> Unfortunately it is not that simple because of two reasons: >> >> 1. cargo looks for a .cargo/config or (up from cargo 1.39) a >> .cargo/config.toml file for configuration. If both files exist, cargo uses >> .cargo/config and ignores the .cargo/config.toml file. >> >> 2. if configuration entries for vendoring already exist in a configuration, >> it is not allowed to add them again. Cargo will not build the project if a >> corresponding entry exists more than once. >> >> The first case would be quiet easy to address but the second one would >> need some sort of merging. > > Yes, so that all calls for waiting until we do have an actual issue. > >> So, speaking for this patch, i would keep the current behavior "overwrite >> every possibly existing config with the vendoring information". > > Yes, because that has so far not caused an issue (at least that we > noticed), so this means it is not an actual problem. Agreed. If you agree so far, I would send the new version of the patch. Regards, Simon From davidh at netacquire.com Fri Oct 21 15:29:00 2022 From: davidh at netacquire.com (David Hauck) Date: Fri, 21 Oct 2022 15:29:00 +0000 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> References: <20221009153521.12444-1-romain.naour@gmail.com> <00204ef4-6f42-ff56-1f50-0fc6cc260976@smile.fr> Message-ID: Hi there, Not sure if this is the correct place to follow-up but I'm wondering why this patch/backport hasn't yet been committed to 'master' (these x86_64 'glibc' autobuild failures appear to still be occurring)? Regards, -David On Monday, October 10, 2022 12:35 AM, buildroot On Behalf Of Romain Naour wrote: > Hello James, > > Le 10/10/2022 ? 01:37, James Hilliard a ?crit : >> On Sun, Oct 9, 2022 at 11:35 AM Romain Naour wrote: >>> >>> Backport upstream commit for x86_64 builds with -Os reported by [1]. >>> >>> [1] >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fso >>> urceware.org%2Fbugzilla%2Fshow_bug.cgi%3Fid%3D29576&data=05%7C01% >>> 7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e1 >>> 8eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CT >>> WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC >>> I6Mn0%3D%7C3000%7C%7C%7C&sdata=kM71qKfb2s%2FJpdiq7raXX5QGiCZSgYG5 >>> %2BF7sDJsivHs%3D&reserved=0 >>> >>> Fixes: >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fgi >>> tlab.com%2Fbuildroot.org%2Fbuildroot%2F-%2Fjobs%2F3134229902&data >>> =05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777 >>> %7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn >>> known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha >>> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=nLa36c%2FtkIs3S6dkSlmJ2QA >>> 6C4sHpmeg5ZxrXheTjes%3D&reserved=0 >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fgi >>> tlab.com%2Fbuildroot.org%2Fbuildroot%2F-%2Fjobs%2F3134229956&data >>> =05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777 >>> %7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn >>> known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha >>> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=z7VVflV9eoBkHtPjL6DF8qQnC >>> %2FyBUmXxARjDgo6DErA%3D&reserved=0 >> >> I think this also fixes an issue in autobuilders, see: >> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fpat >> chwork.ozlabs.org%2Fproject%2Fbuildroot%2Fpatch%2F20220927031702.29184 >> 14-1-james.hilliard1%40gmail.com%2F&data=05%7C01%7Cdavidh%40netacq >> uire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eede24cedbdab4935 >> 5e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi >> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7 >> C%7C&sdata=%2Fk1U8hJG0c8ms2%2F0zEeQu2Z8PQA%2BvSVoGTjO50qMfIo%3D&am >> p;reserved=0 > > Sorry I missed it in the patchwork it was on the second page already... > >> >> https://usg02.safelinks.protection.office365.us/?url=http%3A%2F%2Fauto >> build.buildroot.net%2Fresults%2F5b4%2F5b442f95587ddc65a995bbd9e310c88a >> 66c55b1f&data=05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434e >> b90108daaa91f777%7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C63800984 >> 1155558315%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzI >> iLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=rn7GhsxgoxAG >> Qofv375ApEGTHMKtCiAz4s6e10yLe9A%3D&reserved=0 >> >>> >>> Signed-off-by: Romain Naour >> >> Reviewed-by: James Hilliard >> >>> --- >>> .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ >>> 1 file changed, 48 insertions(+) >>> create mode 100644 >>> package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> >>> diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> new file mode 100644 >>> index 0000000000..4470324f1c >>> --- /dev/null >>> +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch >>> @@ -0,0 +1,48 @@ >>> +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 >>> +2001 >>> +From: Adhemerval Zanella Netto >>> +Date: Wed, 21 Sep 2022 10:51:08 -0300 >>> +Subject: [PATCH] x86: Fix -Os build (BZ #29576) >>> + >>> +The compiler might transform __stpcpy calls (which are routed to >>> +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy >>> +multiarch implementation does not build any working symbol due >>> +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). >>> + >>> +Checked on x86_64-linux-gnu. >>> +Reviewed-by: Carlos O'Donell >>> +Tested-by: Carlos O'Donell >>> + >>> +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) >> >> This is probably better than mine since I had applied from patchwork >> before it was applied upstream. > > Yes maybe... even it doesn't come from the 2.36 stable branch. > I replied on the bug report, so the commit may be backported soon. > > Best regards, > Romain > >> >>> +Signed-off-by: Romain Naour >>> +--- >>> + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ >>> + 1 file changed, 18 insertions(+) >>> + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S >>> + >>> +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +b/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +new file mode 100644 >>> +index 0000000000..19439c553d >>> +--- /dev/null >>> ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S >>> +@@ -0,0 +1,18 @@ >>> ++/* Copyright (C) 2022 Free Software Foundation, Inc. >>> ++ This file is part of the GNU C Library. >>> ++ >>> ++ The GNU C Library is free software; you can redistribute it and/or >>> ++ modify it under the terms of the GNU Lesser General Public >>> ++ License as published by the Free Software Foundation; either >>> ++ version 2.1 of the License, or (at your option) any later version. >>> ++ >>> ++ The GNU C Library is distributed in the hope that it will be useful, >>> ++ but WITHOUT ANY WARRANTY; without even the implied warranty of >>> ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >>> ++ Lesser General Public License for more details. >>> ++ >>> ++ You should have received a copy of the GNU Lesser General Public >>> ++ License along with the GNU C Library; if not, see >>> ++ >>> ++ >> ++ 2Fwww.gnu.org%2Flicenses%2F&data=05%7C01%7Cdavidh%40netacquire >>> ++ .com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eede24cedbdab4935 >>> ++ 5e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbGZsb3d8eyJW >>> ++ IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3 >>> ++ 000%7C%7C%7C&sdata=HK7%2FnPI%2Fo9tp%2FG2N3gDgo%2BIo5vMUfQdrh7d >>> ++ 1JIPRYgU%3D&reserved=0>. */ >>> ++ >>> ++#include "../strcpy.S" >>> +-- >>> +2.34.3 >>> + >>> -- >>> 2.34.3 >>> >>> _______________________________________________ >>> buildroot mailing list >>> buildroot at buildroot.org >>> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fli >>> sts.buildroot.org%2Fmailman%2Flistinfo%2Fbuildroot&data=05%7C01%7 >>> Cdavidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18 >>> eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTW >>> FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI >>> 6Mn0%3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2 >>> B6mrl0m6txsY5g%3D&reserved=0 >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Flis >> ts.buildroot.org%2Fmailman%2Flistinfo%2Fbuildroot&data=05%7C01%7Cd >> avidh%40netacquire.com%7C1d8703ac22ce434eb90108daaa91f777%7Cec65e18eed >> e24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUnknown%7CTWFpbG >> Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% >> 3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2B6mrl0 >> m6txsY5g%3D&reserved=0 > _______________________________________________ buildroot mailing list buildroot at buildroot.org https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Flists.buildroot.org%2Fmailman %2Flistinfo%2Fbuildroot&data=05%7C01%7Cdavidh%40netacquire.com%7C1d8703ac22ce434eb9 0108daaa91f777%7Cec65e18eede24cedbdab49355e3f602d%7C0%7C0%7C638009841155558315%7CUn known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% 3D%7C3000%7C%7C%7C&sdata=iK4ThBYjF%2BC4i9HrvoUnw%2FUQCK4Sn%2B6mrl0m6txsY5g%3 D&reserved=0 External Email Warning! Use caution before clicking links or opening attachments. From yann.morin.1998 at free.fr Fri Oct 21 16:31:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 18:31:33 +0200 Subject: [Buildroot] [PATCH 1/1] support/download/cargo-post-process: use cargo output for vendor config In-Reply-To: References: <20221019161513.994988-1-simon.richter@ptwdosimetry.com> <20221019205236.GG3666@scaer> <20221020202557.GA2992523@scaer> Message-ID: <20221021163133.GO2503@scaer> Simon, All, On 2022-10-21 12:10 +0000, Richter Simon spake thusly: > Am 20.10.22 um 22:25 schrieb Yann E. MORIN: > > I see all the above use git repositories directly, so I suspect this is > > going to cause explicit git-clone + build (that's OK). However, I was > > also wondering if one could have a "registry" like crates.io, either > > internal to a company, or another public resource elsewhere, and how > > that would work... > > It is possible to use an own registry, yes, but i did not use that yet. OK, that's fine! > > Yes, I was wondering if there was a publicly visible package that we > > could cary in Buildroot, so that we know the feature would be regularly > > exercised. You pointed to conduit: it wouldbe good to have it packaged > > in Buildrooot. > I can try to do that. But that should be done in a different patch i think? Yes, as a followup patch, that way you provide the new feature, and you show how it is used. And we get a new interesting package! :-) > > Please, also note that this has the potential to generate different > > hashes, so please check existing cargo packages to see what breaks. > I did, and with my last suggestion (using cargo and tee) those packages > broke. The problem is that `cargo vendor` outputs a preceding newline > that must be removed. > I came up with this: > > cargo vendor \ > --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > --locked VENDOR \ > | tail --lines=+2 | tee .cargo/config Now, one last issue: if the 'cargo' call fails, the script won't fail, because cargo is part of a pipe. The script is already "set -e", but we also need "set -o pipefail". > This removes the first (and empty) line. > > With this, all packages i checked were fine. OK, so don't forget to mention that in your new commit log. Also, the rationale that we can change it, is that it produces the exact same output that we do, and if for some package it would not generate the same output, that package was not working anyway because it was missing parts of its vendored sources anyway. So, that can't regress. > These were: > - bat > - dust > - hyperfine > - ripgrep > - tealdeer > - python-rtoml > - python-orjson > - python-cryptography > - host-python-maturin > > I hope i've got all. You missed: host-sentry-cli (is a host-cargo-package). > If you agree so far, I would send the new version of the patch. Yes, with all we discussed, it looks in good way. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 21 16:41:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 12:41:48 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Message-ID: On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > > Am 20.10.22 um 00:12 schrieb James Hilliard: > > > On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > > wrote: > >> From: Moritz Bitsch > >> > >> The cargo --release flag is used to create optimized builds, not supplying > >> --release has major performance implications. > > Is there an env variable we can use to set this instead? > > > > Some packages use cargo without the cargo infrastructure, for example > > we have a number of pyo3(https://pyo3.rs/) based packages that use the > > cargo env but not the cargo build commands from here. > I could not find any env variable for switching profiles. > > I had a look at python-rtoml, and the used setuptools-rust: supplying > --debug to > the "setup.py build" removes the --release flag from the cargo invocation. Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, we also have maturin which is pep517 based. > >> Signed-off-by: Moritz Bitsch > >> --- > >> package/pkg-cargo.mk | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >> index f7e3f39503..e0556252fa 100644 > >> --- a/package/pkg-cargo.mk > >> +++ b/package/pkg-cargo.mk > >> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >> $$($(2)_CARGO_ENV) \ > >> cargo build \ > >> --offline \ > >> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >> --manifest-path Cargo.toml \ > >> --locked \ > >> $$($(2)_CARGO_BUILD_OPTS) > >> -- > >> 2.37.3 > >> > >> _______________________________________________ > >> buildroot mailing list > >> buildroot at buildroot.org > >> https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Fri Oct 21 17:05:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 11:05:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.10.8 Message-ID: <20221021170536.3408570-1-james.hilliard1@gmail.com> License hash changed due to links in license text being changed from http to https: https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 Signed-off-by: James Hilliard --- package/python3/python3.hash | 4 ++-- package/python3/python3.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python3/python3.hash b/package/python3/python3.hash index c625e7a8ea..f9b8e2ec8d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6eed8415b7516fb2f260906db5d48dd4c06acc0cb24a7d6cc15296a604dcdc48 Python-3.10.7.tar.xz -sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE +sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz +sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index b7df26781a..4131941e11 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -5,7 +5,7 @@ ################################################################################ PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).7 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others -- 2.34.1 From peter at korsgaard.com Fri Oct 21 18:47:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/rtl_433: add RTL_433_CPE_ID_VENDOR In-Reply-To: <20221020162856.201351-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 18:28:56 +0200") References: <20221020162856.201351-1-fontaine.fabrice@gmail.com> Message-ID: <8735bh57zt.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this > package: > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:47:44 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/squashfs: security bump to version 4.5.1 In-Reply-To: <20221020170233.230696-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 19:02:33 +0200") References: <20221020170233.230696-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t93tf3.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2021-40153 > - CVE-2021-41072 which is a writing outside of destination exploit, has > been fixed. > - Drop patch (already in version) > - Set INSTALL_MANPAGES_DIR to an empty value to disable build and > install of man pages which were added with > https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b > https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:48:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:11 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/zlog: bump to version 1.2.16 In-Reply-To: <20221020163312.203021-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Thu, 20 Oct 2022 18:33:12 +0200") References: <20221020163312.203021-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3x3tec.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://github.com/HardySimpson/zlog/releases/tag/1.2.16 > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Drop ZLOG_IGNORE_CVES Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:49:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:49:01 +0200 Subject: [Buildroot] [PATCH] package/python-esptool: bump version to 4.3 In-Reply-To: <20221020211313.874624-1-b.bilas@grinn-global.com> (Bartosz Bilas's message of "Thu, 20 Oct 2022 23:13:12 +0200") References: <20221020211313.874624-1-b.bilas@grinn-global.com> Message-ID: <87pmel3tcy.fsf@dell.be.48ers.dk> >>>>> "Bartosz" == Bartosz Bilas writes: > Signed-off-by: Bartosz Bilas Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:49:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:49:05 +0200 Subject: [Buildroot] [PATCH] package/ttyd: bump to version 1.7.2 In-Reply-To: <20221020211313.874624-2-b.bilas@grinn-global.com> (Bartosz Bilas's message of "Thu, 20 Oct 2022 23:13:13 +0200") References: <20221020211313.874624-1-b.bilas@grinn-global.com> <20221020211313.874624-2-b.bilas@grinn-global.com> Message-ID: <87lep93tcu.fsf@dell.be.48ers.dk> >>>>> "Bartosz" == Bartosz Bilas writes: > Signed-off-by: Bartosz Bilas Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:51:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:51:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.10.8 In-Reply-To: <20221021170536.3408570-1-james.hilliard1@gmail.com> (James Hilliard's message of "Fri, 21 Oct 2022 11:05:36 -0600") References: <20221021170536.3408570-1-james.hilliard1@gmail.com> Message-ID: <87h6zx3t81.fsf@dell.be.48ers.dk> >>>>> "James" == James Hilliard writes: > License hash changed due to links in license text being changed from > http to https: > https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 > Signed-off-by: James Hilliard The announcement mentions a number of security fixes, so I've marked it as a security bump and committed, thanks. https://blog.python.org/2022/10/python-versions-3108-3915-3815-3715-now.html -- Bye, Peter Korsgaard From peter at korsgaard.com Fri Oct 21 18:47:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:47:57 +0200 Subject: [Buildroot] [git commit] package/zlog: bump to version 1.2.16 Message-ID: <20221021185221.4DA3E86F48@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aee1cc302f6da050b198ea63a7c78e62579aed97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://github.com/HardySimpson/zlog/releases/tag/1.2.16 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...fer-overflow-at-zlog_conf_build_with_file.patch | 25 ---------------------- package/zlog/zlog.hash | 2 +- package/zlog/zlog.mk | 5 +---- 3 files changed, 2 insertions(+), 30 deletions(-) diff --git a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch b/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch deleted file mode 100644 index d5f23e1b26..0000000000 --- a/package/zlog/0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a5be8b3a8ddc498de4ad041757285136a55d97e3 Mon Sep 17 00:00:00 2001 -From: XiangfeiCH -Date: Tue, 12 Apr 2022 00:13:35 +0800 -Subject: [PATCH] Fix stack-buffer-overflow at zlog_conf_build_with_file - -[Retrieved from: -https://github.com/HardySimpson/zlog/commit/a5be8b3a8ddc498de4ad041757285136a55d97e3] -Signed-off-by: Fabrice Fontaine ---- - src/conf.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/conf.c b/src/conf.c -index 0f862fa..9a4cb75 100644 ---- a/src/conf.c -+++ b/src/conf.c -@@ -305,7 +305,7 @@ static int zlog_conf_build_with_file(zlog_conf_t * a_conf) - /* Oops the buffer is full - what now? */ - pline = line; - } else { -- for (p--; isspace((int)*p); --p) -+ for (p--; p >= line && isspace((int)*p); --p) - /*EMPTY*/; - p++; - *p = 0; diff --git a/package/zlog/zlog.hash b/package/zlog/zlog.hash index c39505b2c6..3b7c6aa78c 100644 --- a/package/zlog/zlog.hash +++ b/package/zlog/zlog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 00037ab8d52772a95d645f1dcfd2c292b7cea326b54e63e219a5b7fdcb7e6508 zlog-1.2.15.tar.gz +sha256 742401902f2134eb272c49631fe5c38d7aeb9a2ad56fa3ec3d15219b371ba655 zlog-1.2.16.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/zlog/zlog.mk b/package/zlog/zlog.mk index 1929a45a3e..329f2cfe2c 100644 --- a/package/zlog/zlog.mk +++ b/package/zlog/zlog.mk @@ -4,16 +4,13 @@ # ################################################################################ -ZLOG_VERSION = 1.2.15 +ZLOG_VERSION = 1.2.16 ZLOG_SITE = $(call github,HardySimpson,zlog,$(ZLOG_VERSION)) ZLOG_LICENSE = LGPL-2.1 ZLOG_LICENSE_FILES = COPYING ZLOG_CPE_ID_VENDOR = zlog_project ZLOG_INSTALL_STAGING = YES -# 0001-Fix-stack-buffer-overflow-at-zlog_conf_build_with_file.patch -ZLOG_IGNORE_CVES += CVE-2021-43521 - define ZLOG_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE1) CC="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS)" \ -C $(@D) all From peter at korsgaard.com Fri Oct 21 18:46:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:46:11 +0200 Subject: [Buildroot] [git commit] package/rtl_433: add RTL_433_CPE_ID_VENDOR Message-ID: <20221021185221.3953786F46@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69a2a96b53f7d7552e9dd021ddd748bad74768c2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:rtl_433_project:rtl_433 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Artl_433_project%3Artl_433 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/rtl_433/rtl_433.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rtl_433/rtl_433.mk b/package/rtl_433/rtl_433.mk index 8326caedb2..74a0b54a3d 100644 --- a/package/rtl_433/rtl_433.mk +++ b/package/rtl_433/rtl_433.mk @@ -8,6 +8,7 @@ RTL_433_VERSION = 21.12 RTL_433_SITE = $(call github,merbanan,rtl_433,$(RTL_433_VERSION)) RTL_433_LICENSE = GPL-2.0+ RTL_433_LICENSE_FILES = COPYING +RTL_433_CPE_ID_VENDOR = rtl_433_project # Force Release build to remove ASAN. RTL_433_CONF_OPTS = \ From peter at korsgaard.com Fri Oct 21 18:48:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:42 +0200 Subject: [Buildroot] [git commit] package/python-esptool: bump version to 4.3 Message-ID: <20221021185221.56E5A86F49@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9454960cd11ca728ab148551064b32f45aa54d9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bartosz Bilas Signed-off-by: Peter Korsgaard --- package/python-esptool/python-esptool.hash | 4 ++-- package/python-esptool/python-esptool.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-esptool/python-esptool.hash b/package/python-esptool/python-esptool.hash index 4f19fbde41..7e523a7027 100644 --- a/package/python-esptool/python-esptool.hash +++ b/package/python-esptool/python-esptool.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/esptool/json -md5 60bf3a49a794ff5627552f642f28ea3d esptool-4.1.tar.gz -sha256 51a41655187780cb802a5827fab68a3db0d6206330560459c55fcf0e222f277f esptool-4.1.tar.gz +md5 973b63eac1391d3491846d8676c783e7 esptool-4.3.tar.gz +sha256 03d00312eef258baf83faefd0b912b2251dd0440242da9dcb1b18fe75ed614c3 esptool-4.3.tar.gz # Locally computed sha256 checksums sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/python-esptool/python-esptool.mk b/package/python-esptool/python-esptool.mk index 51bc563c5c..3f33fd7865 100644 --- a/package/python-esptool/python-esptool.mk +++ b/package/python-esptool/python-esptool.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ESPTOOL_VERSION = 4.1 +PYTHON_ESPTOOL_VERSION = 4.3 PYTHON_ESPTOOL_SOURCE = esptool-$(PYTHON_ESPTOOL_VERSION).tar.gz -PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/bb/d5/9d000803520b68fd9f6447cd7c15352a79984196f57f0519839b0f80fb8f +PYTHON_ESPTOOL_SITE = https://files.pythonhosted.org/packages/5b/d7/0dae311a94a490d7b7af2f4fab079b34f6244c6129017997bc994f7b360b PYTHON_ESPTOOL_SETUP_TYPE = setuptools PYTHON_ESPTOOL_LICENSE = GPL-2.0+ PYTHON_ESPTOOL_LICENSE_FILES = LICENSE From peter at korsgaard.com Fri Oct 21 18:48:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:48:50 +0200 Subject: [Buildroot] [git commit] package/ttyd: bump to version 1.7.2 Message-ID: <20221021185221.600F786F4A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=86de66e444cda40e8d65cc401229628b48fe410a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bartosz Bilas Signed-off-by: Peter Korsgaard --- package/ttyd/ttyd.hash | 2 +- package/ttyd/ttyd.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ttyd/ttyd.hash b/package/ttyd/ttyd.hash index 283288febf..a2a933b63a 100644 --- a/package/ttyd/ttyd.hash +++ b/package/ttyd/ttyd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 47bc98d43cf2060af06378a2113605b229c46895a391613bdaa5a1197bfe5d47 ttyd-1.7.0.tar.gz +sha256 edc44cd5319c0c9d0858081496cae36fc5c54ee7722e0a547dde39537dfb63de ttyd-1.7.2.tar.gz sha256 8b7e100f8311cb428c57609164d93099bada2599f948359045d1ac876a7a625b LICENSE diff --git a/package/ttyd/ttyd.mk b/package/ttyd/ttyd.mk index 7b582a696c..085511b5fd 100644 --- a/package/ttyd/ttyd.mk +++ b/package/ttyd/ttyd.mk @@ -4,7 +4,7 @@ # ################################################################################ -TTYD_VERSION = 1.7.0 +TTYD_VERSION = 1.7.2 TTYD_SITE = $(call github,tsl0922,ttyd,$(TTYD_VERSION)) TTYD_LICENSE = MIT TTYD_LICENSE_FILES = LICENSE From peter at korsgaard.com Fri Oct 21 18:46:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:46:22 +0200 Subject: [Buildroot] [git commit] package/squashfs: security bump to version 4.5.1 Message-ID: <20221021185221.438D886F47@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=49b11f5e787f68cc310e97a539ad7ed29b041919 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2021-40153 - CVE-2021-41072 which is a writing outside of destination exploit, has been fixed. - Drop patch (already in version) - Set INSTALL_MANPAGES_DIR to an empty value to disable build and install of man pages which were added with https://github.com/plougher/squashfs-tools/commit/25bce9a64cc3f88f0afed9ce2f3d27beabc44d7b https://github.com/plougher/squashfs-tools/releases/tag/4.5.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...id-use-of-INSTALL_DIR-for-symlink-targets.patch | 37 ---------------------- package/squashfs/squashfs.hash | 2 +- package/squashfs/squashfs.mk | 8 +++-- 3 files changed, 6 insertions(+), 41 deletions(-) diff --git a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch b/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch deleted file mode 100644 index 997719e63a..0000000000 --- a/package/squashfs/0001-Avoid-use-of-INSTALL_DIR-for-symlink-targets.patch +++ /dev/null @@ -1,37 +0,0 @@ -From f5c908e92d4c055859be2fddbda266d9e3bfd415 Mon Sep 17 00:00:00 2001 -From: Patrick McCarty -Date: Mon, 26 Jul 2021 11:38:43 -0700 -Subject: [PATCH] Avoid use of INSTALL_DIR for symlink targets - -In case INSTALL_DIR is overridden with a staged install location, using -INSTALL_DIR for the symlink target path prefix will yield an incorrect location -for the final installation. - -Because the symlink itself is already installed to INSTALL_DIR, simply removing -the INSTALL_DIR prefix suffices as a fix. - -Note that using $DESTDIR/$INSTALL_DIR where appropriate can avoid this type of -issue, but that can be considered a future enhancement. - -Signed-off-by: Patrick McCarty -Upstream: f5c908e92d4c055859be2fddbda266d9e3bfd415 -Signed-off-by: Thomas Petazzoni ---- - squashfs-tools/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/squashfs-tools/Makefile b/squashfs-tools/Makefile -index f5a55f1..7262a2e 100755 ---- a/squashfs-tools/Makefile -+++ b/squashfs-tools/Makefile -@@ -406,5 +406,5 @@ install: mksquashfs unsquashfs - mkdir -p $(INSTALL_DIR) - cp mksquashfs $(INSTALL_DIR) - cp unsquashfs $(INSTALL_DIR) -- ln -fs $(INSTALL_DIR)/unsquashfs $(INSTALL_DIR)/sqfscat -- ln -fs $(INSTALL_DIR)/mksquashfs $(INSTALL_DIR)/sqfstar -+ ln -fs unsquashfs $(INSTALL_DIR)/sqfscat -+ ln -fs mksquashfs $(INSTALL_DIR)/sqfstar --- -2.31.1 - diff --git a/package/squashfs/squashfs.hash b/package/squashfs/squashfs.hash index 09a2bae364..13d5aed71f 100644 --- a/package/squashfs/squashfs.hash +++ b/package/squashfs/squashfs.hash @@ -1,5 +1,5 @@ # Locally computed -sha256 b9e16188e6dc1857fe312633920f7d71cc36b0162eb50f3ecb1f0040f02edddd squashfs-4.5.tar.gz +sha256 277b6e7f75a4a57f72191295ae62766a10d627a4f5e5f19eadfbc861378deea7 squashfs-4.5.1.tar.gz # License files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squashfs/squashfs.mk b/package/squashfs/squashfs.mk index f64d441c9b..323908d94e 100644 --- a/package/squashfs/squashfs.mk +++ b/package/squashfs/squashfs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUASHFS_VERSION = 4.5 +SQUASHFS_VERSION = 4.5.1 SQUASHFS_SITE = $(call github,plougher,squashfs-tools,$(SQUASHFS_VERSION)) SQUASHFS_LICENSE = GPL-2.0+ SQUASHFS_LICENSE_FILES = COPYING @@ -75,7 +75,8 @@ endef define SQUASHFS_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) $(SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(TARGET_DIR)/usr/bin \ + INSTALL_MANPAGES_DIR="" install endef define HOST_SQUASHFS_BUILD_CMDS @@ -89,7 +90,8 @@ endef define HOST_SQUASHFS_INSTALL_CMDS $(HOST_MAKE_ENV) $(MAKE) $(HOST_SQUASHFS_MAKE_ARGS) \ - -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin install + -C $(@D)/squashfs-tools/ INSTALL_DIR=$(HOST_DIR)/bin \ + INSTALL_MANPAGES_DIR="" install endef $(eval $(generic-package)) From peter at korsgaard.com Fri Oct 21 18:50:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Fri, 21 Oct 2022 20:50:05 +0200 Subject: [Buildroot] [git commit] package/python3: security bump to version 3.10.8 Message-ID: <20221021185221.6958D86F46@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=72e8471b5cf4a011cd87692719bd4f69d9cc526c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-40674: bundled libexpat was upgraded from 2.4.7 to 2.4.9 which fixes a heap use-after-free vulnerability in function doContent - gh-97616: a fix for a possible buffer overflow in list *= int - gh-97612: a fix for possible shell injection in the example script get-remote-certificate.py(this issue originally had a CVE assigned to it, which its author withdrew) - gh-96577: a fix for a potential buffer overrun in msilib License hash changed due to links in license text being changed from http to https: https://github.com/python/cpython/commit/96f8d3619d839266491b722b943de65892bb0e81 Signed-off-by: James Hilliard [Peter: mark as security bump] Signed-off-by: Peter Korsgaard --- package/python3/python3.hash | 4 ++-- package/python3/python3.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python3/python3.hash b/package/python3/python3.hash index c625e7a8ea..f9b8e2ec8d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6eed8415b7516fb2f260906db5d48dd4c06acc0cb24a7d6cc15296a604dcdc48 Python-3.10.7.tar.xz -sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE +sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz +sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index b7df26781a..4131941e11 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -5,7 +5,7 @@ ################################################################################ PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).7 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others From yann.morin.1998 at free.fr Fri Oct 21 18:58:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:58:22 +0200 Subject: [Buildroot] [git commit] package/gpsd: drop legacy cleanup Message-ID: <20221021185834.CC94886F52@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b3b962c93579f02775fbf057f317bcd58772131e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since gpsd-3.22, the systemd service files no longer contain hard-coded paths to /usr/local/, but use @SBINDIR@ which is replaced appropriately at build time, and contains the correct path. Drop the legacy fixup now. Signed-off-by: Yann E. MORIN Cc: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/gpsd/gpsd.mk | 8 -------- 1 file changed, 8 deletions(-) diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk index 0c7018f26d..b8526c0260 100644 --- a/package/gpsd/gpsd.mk +++ b/package/gpsd/gpsd.mk @@ -213,14 +213,6 @@ define GPSD_INSTALL_INIT_SYSV $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd endef -# systemd unit files are installed automatically, but need to update the -# /usr/local path references in the provided files to /usr. -define GPSD_INSTALL_INIT_SYSTEMD - $(SED) 's%/usr/local%/usr%' \ - $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service \ - $(TARGET_DIR)/usr/lib/systemd/system/gpsdctl at .service -endef - define GPSD_INSTALL_STAGING_CMDS (cd $(@D); \ $(GPSD_SCONS_ENV) \ From yann.morin.1998 at free.fr Fri Oct 21 18:58:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:58:22 +0200 Subject: [Buildroot] [git commit] package/gpsd: actually wait for after chrony Message-ID: <20221021185834.DE3DF86F53@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2c9ef36242341b5f8db171251d737d29fc376e0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We use gpsd's upstream systemd service unit files, which define a dependency on chronyd.service. And indeed, upstream chrony does provide an example service unit file chronyd.service. However, in Buildroot, we are not using chrony's upstream unit, we are providing our own, much simplified as compared to upstream. We install that unit file as chrony.service. Notice that subtle difference in the name: upstream's is chronyd, with a trailing 'd', while ours just chrony, without the trailing 'd'. As a consequence, in a Buildroot-built system, gpsd does not wait for after chrony is started, which causes all kind of mayhem when gpsd actually needs to talk to chrony. We have multiple options: 1. use chrony's upstream unit file; 2 rename the chrony service file as installed by Buildroot, to match what chrony would actually do; 3. tweak gpsd's unit file to refer to chrony.service, not chronyd.service; 4. leverage systemd's flexibility in how units are defined, and provide a drop-in to complement gpsd's unit to also wait for chrony.service. For 1. it is totally unknown why we do have our unit file to begin with, rather than use upstream's. Since upstream's is much more complex than ours, using it might have unforetold consequences. Going with 2. seems the easiest at first sight, but then it would break systems where users provide their own drop-ins for chrony, as they would no longer match. 3. is relatively easy, but running sed is not entirely nice. Besides, it semantically should be a post-install hook, rather than a systemd-init command, but again that makes things a bit more ugly. Also, some people may have their own gpsd.service in an overlay or whatever, which would break our fixup. Solution 4. is pretty straightforward, although it is not ideal either. To be noted: some distributions, like Ubuntu 20.04 at least, do install the chrony unit file as chrony.service, like Buildroot does. However, there does not appear to be any fixup in gpsd for this discrepancy, as their gpsd install still refers to chronyd.service. So that does not help us decide what to do. So, eventually, we decided to go with solution 4, which has the least impact on the system, and keeps the status-quo for all other use-cases. Signed-off-by: Yann E. MORIN Cc: Bernd Kuhls Cc: Alex Suykov Signed-off-by: Yann E. MORIN --- package/gpsd/br-chrony.conf | 2 ++ package/gpsd/gpsd.mk | 8 ++++++++ 2 files changed, 10 insertions(+) diff --git a/package/gpsd/br-chrony.conf b/package/gpsd/br-chrony.conf new file mode 100644 index 0000000000..67a79e5f65 --- /dev/null +++ b/package/gpsd/br-chrony.conf @@ -0,0 +1,2 @@ +[Unit] +After=chrony.service diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk index b8526c0260..961ebde649 100644 --- a/package/gpsd/gpsd.mk +++ b/package/gpsd/gpsd.mk @@ -213,6 +213,14 @@ define GPSD_INSTALL_INIT_SYSV $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd endef +# When using chrony, wait for after Buildroot's chrony.service +ifeq ($(BR2_PACKAGE_CHRONY),y) +define GPSD_INSTALL_INIT_SYSTEMD + $(INSTALL) -D -m 0644 $(GPSD_PKGDIR)/br-chrony.conf \ + $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service.d/br-chrony.conf +endef +endif + define GPSD_INSTALL_STAGING_CMDS (cd $(@D); \ $(GPSD_SCONS_ENV) \ From yann.morin.1998 at free.fr Fri Oct 21 18:59:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:59:17 +0200 Subject: [Buildroot] [PATCH 1/2] package/gpsd: drop legacy cleanup In-Reply-To: <27279_1663677903_6329B5CF_27279_384_1_a0ff8f4ff44501c533f2779965524fc93294a825.1663677504.git.yann.morin@orange.com> References: <27279_1663677903_6329B5CF_27279_384_1_a0ff8f4ff44501c533f2779965524fc93294a825.1663677504.git.yann.morin@orange.com> Message-ID: <20221021185917.GB2992523@scaer> Yann, All, On 2022-09-20 14:45 +0200, yann.morin at orange.com spake thusly: > From: "Yann E. MORIN" > > Since gpsd-3.22, the systemd service files no longer contain hard-coded > paths to /usr/local/, but use @SBINDIR@ which is replaced appropriately > at build time, and contains the correct path. > > Drop the legacy fixup now. > > Signed-off-by: Yann E. MORIN > Cc: Bernd Kuhls Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/gpsd/gpsd.mk | 8 -------- > 1 file changed, 8 deletions(-) > > diff --git a/package/gpsd/gpsd.mk b/package/gpsd/gpsd.mk > index 0c7018f26d..b8526c0260 100644 > --- a/package/gpsd/gpsd.mk > +++ b/package/gpsd/gpsd.mk > @@ -213,14 +213,6 @@ define GPSD_INSTALL_INIT_SYSV > $(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd > endef > > -# systemd unit files are installed automatically, but need to update the > -# /usr/local path references in the provided files to /usr. > -define GPSD_INSTALL_INIT_SYSTEMD > - $(SED) 's%/usr/local%/usr%' \ > - $(TARGET_DIR)/usr/lib/systemd/system/gpsd.service \ > - $(TARGET_DIR)/usr/lib/systemd/system/gpsdctl at .service > -endef > - > define GPSD_INSTALL_STAGING_CMDS > (cd $(@D); \ > $(GPSD_SCONS_ENV) \ > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Fri Oct 21 19:01:09 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 13:01:09 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiojobs: bump to version 1.1.0 Message-ID: <20221021190109.3411635-1-james.hilliard1@gmail.com> Add new python-async-timeout runtime dependency. License hash changed due to removal of full license text: https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 Signed-off-by: James Hilliard --- package/python-aiojobs/Config.in | 1 + package/python-aiojobs/python-aiojobs.hash | 6 +++--- package/python-aiojobs/python-aiojobs.mk | 6 +++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/package/python-aiojobs/Config.in b/package/python-aiojobs/Config.in index 0cdd1c106f..2dc4f3f955 100644 --- a/package/python-aiojobs/Config.in +++ b/package/python-aiojobs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_PYTHON_AIOJOBS bool "python-aiojobs" + select BR2_PACKAGE_PYTHON_ASYNC_TIMEOUT # runtime help Jobs scheduler for managing background task (asyncio). diff --git a/package/python-aiojobs/python-aiojobs.hash b/package/python-aiojobs/python-aiojobs.hash index 44bf20c428..511953713b 100644 --- a/package/python-aiojobs/python-aiojobs.hash +++ b/package/python-aiojobs/python-aiojobs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiojobs/json -md5 d537fefca047067255758d7cb9e39db8 aiojobs-0.3.0.tar.gz -sha256 f6631d42dc4308f7d883abbd70d4e976f3fcc35a3ba1e8eae5d4af4940a1e0c3 aiojobs-0.3.0.tar.gz +md5 18a5b38cc13b2d59a91fdfec64588b4c aiojobs-1.1.0.tar.gz +sha256 f0c43dfc4de359052a67df309b593732c32028deef1bb787c7a363da29accde3 aiojobs-1.1.0.tar.gz # Locally computed sha256 checksums -sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE +sha256 1803dc89455114eefad3b827543343edc2452432fdac29b5edc66c8b66d4cbf3 LICENSE diff --git a/package/python-aiojobs/python-aiojobs.mk b/package/python-aiojobs/python-aiojobs.mk index 5d9a19eb8c..075d807d8b 100644 --- a/package/python-aiojobs/python-aiojobs.mk +++ b/package/python-aiojobs/python-aiojobs.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_AIOJOBS_VERSION = 0.3.0 +PYTHON_AIOJOBS_VERSION = 1.1.0 PYTHON_AIOJOBS_SOURCE = aiojobs-$(PYTHON_AIOJOBS_VERSION).tar.gz -PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/da/09/76d9c0d66d2fd1333835f110cd85f7456de7cf3f60425e3b283fba562731 -PYTHON_AIOJOBS_SETUP_TYPE = distutils +PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/99/75/b6d3678d804fffda81ebbac6214c35a4417d5ddbd70ffe7958ad951e64d2 +PYTHON_AIOJOBS_SETUP_TYPE = setuptools PYTHON_AIOJOBS_LICENSE = Apache-2.0 PYTHON_AIOJOBS_LICENSE_FILES = LICENSE -- 2.34.1 From yann.morin.1998 at free.fr Fri Oct 21 19:07:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:07:31 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel In-Reply-To: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <20221021190731.GC2992523@scaer> Yann, All, On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > To generate the glibc locale data, we call into a recursive Makefile, > so as to generate locales in parallel. This is done as part of a > target-fialize hook. *finalize > However, that hook is registered after all packages have been parsed, > and as such, it maye be registered after hooks defined in packages. > > Furthermore, the expansion of target-finalize hooks is done in a recipe, > so it is not easy to understand whether this generates a "simple" rule > or not. > > As a consequence, despite the use of $(MAKE), make may not notice that > the command is a recursive call, and will decide to close the jobserver > file-descriptors, yieldiong warnings like: *yielding > make[2]: warning: jobserver unavailable: using -j1. Add '+' to > parent make rule. > > This causes the lcoale data to not be generated in parallel, which is *locale (damn, I forgot to fix that one when applying) > initially all the fuss about using a sub-makefile... > > So, do as suggested, and prepend the hook with a '+', so that it > isexplicit to make that it should not close its jobserver fds. *is explicit > Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) > > Signed-off-by: Yann E. MORIN > Cc: Gleb Mazovetskiy Applied to master with the typoes fixed, thanks. Regards, Yann E. MORIN. > --- > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..ededfa491d 100644 > --- a/Makefile > +++ b/Makefile > @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) > PACKAGES += host-localedef > > define GENERATE_GLIBC_LOCALES > - $(MAKE) -f support/misc/gen-glibc-locales.mk \ > + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ > ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ > LOCALES="$(GLIBC_GENERATE_LOCALES)" \ > Q=$(Q) > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:08:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:08:41 +0200 Subject: [Buildroot] [PATCH 2/3] support/scripts: don't require gawk to generate glibc gconv modules In-Reply-To: <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> <1138_1665746311_63494587_1138_437_1_82ab2cc49c43374ceb22a1fdd6bc5e4c72d29df2.1665746266.git.yann.morin@orange.com> Message-ID: <20221021190841.GD2992523@scaer> Yann, All, On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > When a subset of the glibc gconv modules installed, we eed to generate a *are installed, we need > trimmed-down list of available modules. We currently use gawk for that. > > However, we are not using any GNU extension in that awk script, and it > happens to work as expected when using mawk (which has no GNU > extension). > > Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) > did not explain why it used gawk explicitly, and given the age for that > commit, we doubt we'd be able to have the involved participants recall > anything from that period... > > Besides, gawk is not a requirement for Buildroot. > > Switch over to using plain awk. > > Signed-off-by: Yann E. MORIN Applied to master with the typoes fixed, thanks. Regards, Yann E. MORIN. > --- > support/scripts/expunge-gconv-modules | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules > index 03012c1ce3..bc60fc0ce4 100755 > --- a/support/scripts/expunge-gconv-modules > +++ b/support/scripts/expunge-gconv-modules > @@ -19,7 +19,7 @@ > # we handle each with slightly different code, since the second never has > # associated aliases. > > -gawk -v files="${1}" ' > +awk -v files="${2}" ' > $1 == "alias" { > aliases[$3] = aliases[$3] " " $2; > } > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:10:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:10:05 +0200 Subject: [Buildroot] [PATCH 3/3] toolchain: suppot gconv modules fro mglibc >= 2.34 In-Reply-To: <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> <8818_1665746314_6349458A_8818_181_1_964b37c54bd0ea2c0ca9a24787249f3276aec699.1665746266.git.yann.morin@orange.com> Message-ID: <20221021191005.GE2992523@scaer> Yann, All, In the title: *support, from glibc Also, many typoes in the commit log... On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > Startig with glibc 2.34, the gconv modules description has been split in > two: > - a common definition in the old location, /usr/lib/gconv/gconv-modules > - specific defitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ > > This is done so as to simplify the handling of glibc gconv modules, and > eventually to segregate those outside of glibc, and so that third-parties > may also provide their own gconv converters and their definitions. > > And starting with that same glibc version, most of the gconv modules > definition is moved to an extra configuration file in that > sub-directory. > > It is thus no longer possible to use special code pages, like cp850, > which are very usefull to access FAT-formatted devices. > > Add suppot for this new gconv layout, while keeping support for older > glibc versions. Note that the modules themselves are not moved or > renaed, just the definition files have changed. > > Instead of passing the one old gonv modules definitions file on stdin, > we pass the base directory to that file, and move into the script the > responsibility to find all the gconv definition files. > > Signed-off-by: Yann E. MORIN > Cc: Thomas Petazzoni > Cc: Romain Naour > Cc: Thomas De Schampheleire > Cc: Giulio Benetti Applied to master with the many typoes fixed, thanks. Regards, Yann E. MORIN. > --- > support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ > toolchain/toolchain.mk | 9 +++++++-- > 2 files changed, 23 insertions(+), 8 deletions(-) > > diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules > index bc60fc0ce4..e9ac48ca3f 100755 > --- a/support/scripts/expunge-gconv-modules > +++ b/support/scripts/expunge-gconv-modules > @@ -1,11 +1,17 @@ > #!/usr/bin/env bash > > # This script is used to generate a gconv-modules file that takes into > -# account only the gconv modules installed by Buildroot. It receives > -# on its standard input the original complete gconv-modules file from > -# the toolchain, and as arguments the list of gconv modules that were > -# actually installed, and writes on its standard output the new > -# gconv-modules file. > +# account only the gconv modules installed by Buildroot, and generates > +# a stripped-down gconv-moduels file on its stdout. > +# It takes two arguments: > +# $1: the directory where to look for gconv modules definitions > +# $2: a space-separated list of gconv modules that were actually > +# installed > + > +# Starting with glibc-2.34, modules definitions are located in multiple > +# files: > +# ${1}/gconv-modules > +# ${1}/gconv-modules.d/*.conf > > # The format of gconv-modules is precisely documented in the > # file itself. It consists of two different directives: > @@ -19,7 +25,11 @@ > # we handle each with slightly different code, since the second never has > # associated aliases. > > -awk -v files="${2}" ' > +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do > + [ -e "${f}" ] || continue > + cat "${f}" > +done \ > +|awk -v files="${2}" ' > $1 == "alias" { > aliases[$3] = aliases[$3] " " $2; > } > diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk > index 08d1649603..fe87a72ed4 100644 > --- a/toolchain/toolchain.mk > +++ b/toolchain/toolchain.mk > @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS > $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ > $(TARGET_DIR)/usr/lib/gconv \ > || exit 1; \ > + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ > + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ > + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ > + fi; \ > else \ > for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ > $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ > @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS > || exit 1; \ > done; \ > done; \ > - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ > - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ > + ./support/scripts/expunge-gconv-modules \ > + $(STAGING_DIR)/usr/lib/$${d}/gconv \ > + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ > >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ > fi > endef > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:46:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:46:06 +0200 Subject: [Buildroot] [PATCH 1/3] Makefile: really generate glibc locales in parallel In-Reply-To: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> References: <9796_1665746309_63494585_9796_388_2_2b0b6b796ff36967c963ba90f138a03d467ee5cf.1665746266.git.yann.morin@orange.com> Message-ID: <20221021194606.GF2992523@scaer> Yann, All, Your git send-email setup is incorrect: the From field is missing the realname part (which is weird, as it was not missing in the previous gpsd patches)... Regards, Yann E. MORIN. On 2022-10-14 13:18 +0200, yann.morin at orange.com spake thusly: > To generate the glibc locale data, we call into a recursive Makefile, > so as to generate locales in parallel. This is done as part of a > target-fialize hook. > > However, that hook is registered after all packages have been parsed, > and as such, it maye be registered after hooks defined in packages. > > Furthermore, the expansion of target-finalize hooks is done in a recipe, > so it is not easy to understand whether this generates a "simple" rule > or not. > > As a consequence, despite the use of $(MAKE), make may not notice that > the command is a recursive call, and will decide to close the jobserver > file-descriptors, yieldiong warnings like: > make[2]: warning: jobserver unavailable: using -j1. Add '+' to > parent make rule. > > This causes the lcoale data to not be generated in parallel, which is > initially all the fuss about using a sub-makefile... > > So, do as suggested, and prepend the hook with a '+', so that it > isexplicit to make that it should not close its jobserver fds. > > Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) > > Signed-off-by: Yann E. MORIN > Cc: Gleb Mazovetskiy > --- > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index ec7c034ac1..ededfa491d 100644 > --- a/Makefile > +++ b/Makefile > @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) > PACKAGES += host-localedef > > define GENERATE_GLIBC_LOCALES > - $(MAKE) -f support/misc/gen-glibc-locales.mk \ > + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ > ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ > LOCALES="$(GLIBC_GENERATE_LOCALES)" \ > Q=$(Q) > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Fri Oct 21 19:01:25 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:01:25 +0200 Subject: [Buildroot] [git commit] support/scripts: don't require gawk to generate glibc gconv modules Message-ID: <20221021195123.819B686F77@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=822cc1ebc42cc43877a20ca51d94689aed3e4424 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master When only a subset of the glibc gconv modules are installed, we need to generate a trimmed-down list of available modules. We currently use gawk for that. However, we are not using any GNU extension in that awk script, and it happens to work as expected when using mawk (which has no GNU extension). Commit 11c1076db9a5 (toolchain: add option to copy the gconv libraries) did not explain why it used gawk explicitly, and given the age for that commit, we doubt we'd be able to have the involved participants recall anything from that period... Besides, gawk is not a requirement for Buildroot. Switch over to using plain awk. Signed-off-by: Yann E. MORIN Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index 03012c1ce3..bc60fc0ce4 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -19,7 +19,7 @@ # we handle each with slightly different code, since the second never has # associated aliases. -gawk -v files="${1}" ' +awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } From yann.morin.1998 at free.fr Fri Oct 21 18:59:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 20:59:54 +0200 Subject: [Buildroot] [git commit] Makefile: really generate glibc locales in parallel Message-ID: <20221021195123.77ACB86F75@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4164ed24f277b24096ab065aa85b7de9d0c80c02 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master To generate the glibc locale data, we call into a recursive Makefile, so as to generate locales in parallel. This is done as part of a target-finalize hook. However, that hook is registered after all packages have been parsed, and as such, it maye be registered after hooks defined in packages. Furthermore, the expansion of target-finalize hooks is done in a recipe, so it is not easy to understand whether this generates a "simple" rule or not. As a consequence, despite the use of $(MAKE), make may not notice that the command is a recursive call, and will decide to close the jobserver file-descriptors, yielding warnings like: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. This causes the lcoale data to not be generated in parallel, which is initially all the fuss about using a sub-makefile... So, do as suggested, and prepend the hook with a '+', so that it is explicit to make that it should not close its jobserver fds. Fixes: 6fbdf5159607 (Makefile: Parallelize glibc locale generation) Signed-off-by: Yann E. MORIN Cc: Gleb Mazovetskiy Signed-off-by: Yann E. MORIN --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ec7c034ac1..ededfa491d 100644 --- a/Makefile +++ b/Makefile @@ -653,7 +653,7 @@ ifneq ($(GLIBC_GENERATE_LOCALES),) PACKAGES += host-localedef define GENERATE_GLIBC_LOCALES - $(MAKE) -f support/misc/gen-glibc-locales.mk \ + +$(MAKE) -f support/misc/gen-glibc-locales.mk \ ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \ LOCALES="$(GLIBC_GENERATE_LOCALES)" \ Q=$(Q) From yann.morin.1998 at free.fr Fri Oct 21 19:02:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Fri, 21 Oct 2022 21:02:40 +0200 Subject: [Buildroot] [git commit] toolchain: support gconv modules from glibc >= 2.34 Message-ID: <20221021195123.8CB5D86F78@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d948e1b34e4e6e199111feb29803d14dbfc120b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Startig with glibc 2.34, the gconv modules description has been split in two: - a common definition in the old location, /usr/lib/gconv/gconv-modules - specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/ This is done so as to simplify the handling of glibc gconv modules, and eventually to segregate those outside of glibc, and so that third-parties may also provide their own gconv converters and their definitions. And starting with that same glibc version, most of the gconv modules definitions are moved to an extra configuration file in that sub-directory. It is thus no longer possible to use special code pages, like cp850, which are very useful to access FAT-formatted devices. Add support for this new gconv layout, while keeping support for older glibc versions. Note that the modules themselves are not moved or renamed, just the definition files have changed. Instead of passing the one old gonv modules definitions file on stdin, we pass the base directory to that file, and move into the script the responsibility to find all the gconv definition files. Signed-off-by: Yann E. MORIN Cc: Thomas Petazzoni Cc: Romain Naour Cc: Thomas De Schampheleire Cc: Giulio Benetti Signed-off-by: Yann E. MORIN --- support/scripts/expunge-gconv-modules | 22 ++++++++++++++++------ toolchain/toolchain.mk | 9 +++++++-- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/support/scripts/expunge-gconv-modules b/support/scripts/expunge-gconv-modules index bc60fc0ce4..e9ac48ca3f 100755 --- a/support/scripts/expunge-gconv-modules +++ b/support/scripts/expunge-gconv-modules @@ -1,11 +1,17 @@ #!/usr/bin/env bash # This script is used to generate a gconv-modules file that takes into -# account only the gconv modules installed by Buildroot. It receives -# on its standard input the original complete gconv-modules file from -# the toolchain, and as arguments the list of gconv modules that were -# actually installed, and writes on its standard output the new -# gconv-modules file. +# account only the gconv modules installed by Buildroot, and generates +# a stripped-down gconv-moduels file on its stdout. +# It takes two arguments: +# $1: the directory where to look for gconv modules definitions +# $2: a space-separated list of gconv modules that were actually +# installed + +# Starting with glibc-2.34, modules definitions are located in multiple +# files: +# ${1}/gconv-modules +# ${1}/gconv-modules.d/*.conf # The format of gconv-modules is precisely documented in the # file itself. It consists of two different directives: @@ -19,7 +25,11 @@ # we handle each with slightly different code, since the second never has # associated aliases. -awk -v files="${2}" ' +for f in ${1}/gconv-modules ${1}/gconv-modules.d/*.conf; do + [ -e "${f}" ] || continue + cat "${f}" +done \ +|awk -v files="${2}" ' $1 == "alias" { aliases[$3] = aliases[$3] " " $2; } diff --git a/toolchain/toolchain.mk b/toolchain/toolchain.mk index 08d1649603..fe87a72ed4 100644 --- a/toolchain/toolchain.mk +++ b/toolchain/toolchain.mk @@ -27,6 +27,10 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS $(INSTALL) -m 0644 $(STAGING_DIR)/usr/lib/$${d}/gconv/*.so \ $(TARGET_DIR)/usr/lib/gconv \ || exit 1; \ + if [ -d $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d ]; then \ + cp -a $(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules.d \ + $(TARGET_DIR)/usr/lib/gconv/ || exit 1; \ + fi; \ else \ for l in $(TOOLCHAIN_GLIBC_GCONV_LIBS); do \ $(INSTALL) -m 0644 -D $(STAGING_DIR)/usr/lib/$${d}/gconv/$${l}.so \ @@ -41,8 +45,9 @@ define TOOLCHAIN_GLIBC_COPY_GCONV_LIBS || exit 1; \ done; \ done; \ - ./support/scripts/expunge-gconv-modules "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ - <$(STAGING_DIR)/usr/lib/$${d}/gconv/gconv-modules \ + ./support/scripts/expunge-gconv-modules \ + $(STAGING_DIR)/usr/lib/$${d}/gconv \ + "$(TOOLCHAIN_GLIBC_GCONV_LIBS)" \ >$(TARGET_DIR)/usr/lib/gconv/gconv-modules; \ fi endef From moritz at h6t.eu Fri Oct 21 21:04:07 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Fri, 21 Oct 2022 23:04:07 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> Message-ID: <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Am 21.10.22 um 18:41 schrieb James Hilliard: > On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: >> >> Am 20.10.22 um 00:12 schrieb James Hilliard: >> >>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot >>> wrote: >>>> From: Moritz Bitsch >>>> >>>> The cargo --release flag is used to create optimized builds, not supplying >>>> --release has major performance implications. >>> Is there an env variable we can use to set this instead? >>> >>> Some packages use cargo without the cargo infrastructure, for example >>> we have a number of pyo3(https://pyo3.rs/) based packages that use the >>> cargo env but not the cargo build commands from here. >> I could not find any env variable for switching profiles. >> >> I had a look at python-rtoml, and the used setuptools-rust: supplying >> --debug to >> the "setup.py build" removes the --release flag from the cargo invocation. > > Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > we also have maturin which is pep517 based. I'm in no way a a python expert, so take my words with a grain of salt. I could not find a way to specify what build profile is used by maturin when in a pep517 build. Even if maturin supports the -r flag for release builds when called directly. > >>>> Signed-off-by: Moritz Bitsch >>>> --- >>>> package/pkg-cargo.mk | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >>>> index f7e3f39503..e0556252fa 100644 >>>> --- a/package/pkg-cargo.mk >>>> +++ b/package/pkg-cargo.mk >>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >>>> $$($(2)_CARGO_ENV) \ >>>> cargo build \ >>>> --offline \ >>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >>>> --manifest-path Cargo.toml \ >>>> --locked \ >>>> $$($(2)_CARGO_BUILD_OPTS) >>>> -- >>>> 2.37.3 >>>> >>>> _______________________________________________ >>>> buildroot mailing list >>>> buildroot at buildroot.org >>>> https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Fri Oct 21 22:08:00 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:08:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/empty: bump to version 0.6.22b Message-ID: <20221021220800.10420-1-fontaine.fabrice@gmail.com> - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) - Update hash of COPYRIGHT (update in year with https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) 10.08.2022 0.6.22b -------------------------------------------------------------------------------- * Man pages directory parameterization * Tarball clenup, repacking https://sourceforge.net/p/empty/code/ci/master/tree/CHANGELOG Signed-off-by: Fabrice Fontaine --- package/empty/empty.hash | 4 ++-- package/empty/empty.mk | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/empty/empty.hash b/package/empty/empty.hash index c5fbc2b4ac..cc74254a7a 100644 --- a/package/empty/empty.hash +++ b/package/empty/empty.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 2fccd0faa1b3deaec1add679cbde3f34250e45872ad5df463badd4bb4edeb797 empty-0.6.21b.tgz -sha256 f01dbe3c624084900b9df1393d9062518b2bc0487acd6a3300ebd6e71352d112 COPYRIGHT +sha256 f581d560e1fa857f5304586e3c2107b5838bcf11dedcccec4a7191fa9e261b69 empty-0.6.22b.tgz +sha256 db6b65f5eaf782a92715887ac107f3477d64016301a66194a92312b13ff89be1 COPYRIGHT diff --git a/package/empty/empty.mk b/package/empty/empty.mk index a9b8080a8e..91d9476445 100644 --- a/package/empty/empty.mk +++ b/package/empty/empty.mk @@ -4,12 +4,11 @@ # ################################################################################ -EMPTY_VERSION = 0.6.21b +EMPTY_VERSION = 0.6.22b EMPTY_SOURCE = empty-$(EMPTY_VERSION).tgz EMPTY_SITE = http://downloads.sourceforge.net/project/empty/empty/empty-$(EMPTY_VERSION) EMPTY_LICENSE = BSD-3-Clause EMPTY_LICENSE_FILES = COPYRIGHT -EMPTY_STRIP_COMPONENTS = 0 define EMPTY_BUILD_CMDS $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:11:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:11:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/easy-rsa: bump to version 3.1.1 Message-ID: <20221021221133.13293-1-fontaine.fabrice@gmail.com> https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 Signed-off-by: Fabrice Fontaine --- package/easy-rsa/easy-rsa.hash | 2 +- package/easy-rsa/easy-rsa.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/easy-rsa/easy-rsa.hash b/package/easy-rsa/easy-rsa.hash index e304c367fa..5be651bde0 100644 --- a/package/easy-rsa/easy-rsa.hash +++ b/package/easy-rsa/easy-rsa.hash @@ -1,5 +1,5 @@ # Locally computed: (after verifying gpg sig) -sha512 be2dedde19eaf923622da61db34ecb2e926b3f15a60a0c3d9858d3126dbe3b4af9c0f6674f964516572b50611ffd1d254952f27dc5de867bd7a67474c89be5f0 EasyRSA-3.1.0.tgz +sha512 8c8d1f4baf90475d4cce334d116b7f12b82687157796b25560600b5098769226ae2f60f02982c75266b625d66b465360ffa815260ad44850923e3fbc9ba8540a EasyRSA-3.1.1.tgz # Hash for license files sha256 7c4a4fc71745d93a87278801f1bca555562ca23f21e18293add64b9e6f6b7bf1 COPYING.md diff --git a/package/easy-rsa/easy-rsa.mk b/package/easy-rsa/easy-rsa.mk index 7c32c1d83d..4ea45506dd 100644 --- a/package/easy-rsa/easy-rsa.mk +++ b/package/easy-rsa/easy-rsa.mk @@ -4,7 +4,7 @@ # ################################################################################ -EASY_RSA_VERSION = 3.1.0 +EASY_RSA_VERSION = 3.1.1 EASY_RSA_SOURCE = EasyRSA-$(EASY_RSA_VERSION).tgz EASY_RSA_SITE = https://github.com/OpenVPN/easy-rsa/releases/download/v$(EASY_RSA_VERSION) EASY_RSA_LICENSE = GPL-2.0 -- 2.35.1 From paguilar at paguilar.org Fri Oct 21 22:09:56 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sat, 22 Oct 2022 00:09:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/libunistring: bump to version 1.1 Message-ID: <20221021220956.699772-1-paguilar@paguilar.org> https://savannah.gnu.org/projects/libunistring/ Signed-off-by: Pedro Aguilar --- package/libunistring/libunistring.hash | 2 +- package/libunistring/libunistring.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libunistring/libunistring.hash b/package/libunistring/libunistring.hash index 81ffd4fb0c..8267d56327 100644 --- a/package/libunistring/libunistring.hash +++ b/package/libunistring/libunistring.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature # https://ftp.gnu.org/gnu/libunistring/libunistring-0.9.10.tar.xz.sig -sha256 5bab55b49f75d77ed26b257997e919b693f29fd4a1bc22e0e6e024c246c72741 libunistring-1.0.tar.xz +sha256 827c1eb9cb6e7c738b171745dac0888aa58c5924df2e59239318383de0729b98 libunistring-1.1.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c COPYING.LIB diff --git a/package/libunistring/libunistring.mk b/package/libunistring/libunistring.mk index a69eacd676..8d5b6f54ec 100644 --- a/package/libunistring/libunistring.mk +++ b/package/libunistring/libunistring.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBUNISTRING_VERSION = 1.0 +LIBUNISTRING_VERSION = 1.1 LIBUNISTRING_SITE = $(BR2_GNU_MIRROR)/libunistring LIBUNISTRING_SOURCE = libunistring-$(LIBUNISTRING_VERSION).tar.xz LIBUNISTRING_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:24:12 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:24:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/irssi: bump to version 1.4.2 Message-ID: <20221021222412.109567-1-fontaine.fabrice@gmail.com> Use offical tarball link (from https://irssi.org/download) https://irssi.org/2022/07/17/irssi-1.4.2-released/ https://irssi.org/2022/06/12/irssi-1.4.1-released/ Signed-off-by: Fabrice Fontaine --- package/irssi/irssi.hash | 2 +- package/irssi/irssi.mk | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/irssi/irssi.hash b/package/irssi/irssi.hash index 05555250a7..ecd339d83d 100644 --- a/package/irssi/irssi.hash +++ b/package/irssi/irssi.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 a647bfefed14d2221fa77b6edac594934dc672c4a560417b1abcbbc6b88d769f irssi-1.2.3.tar.xz +sha256 79a4765d2dfe153c440a1775b074d5d0682b96814c7cf92325b5e15ce50e26a8 irssi-1.4.2.tar.xz # Locally calculated sha256 a1a27cb2ecee8d5378fbb3562f577104a445d6d66fee89286e16758305e63e2b COPYING diff --git a/package/irssi/irssi.mk b/package/irssi/irssi.mk index da71622a04..c2d02289ad 100644 --- a/package/irssi/irssi.mk +++ b/package/irssi/irssi.mk @@ -4,11 +4,9 @@ # ################################################################################ -IRSSI_VERSION = 1.2.3 +IRSSI_VERSION = 1.4.2 IRSSI_SOURCE = irssi-$(IRSSI_VERSION).tar.xz -# Do not use the github helper here. The generated tarball is *NOT* the -# same as the one uploaded by upstream for the release. -IRSSI_SITE = https://github.com/irssi/irssi/releases/download/$(IRSSI_VERSION) +IRSSI_SITE = https://codeberg.org/irssi/irssi/releases/download/$(IRSSI_VERSION) IRSSI_LICENSE = GPL-2.0+ IRSSI_LICENSE_FILES = COPYING IRSSI_CPE_ID_VENDOR = irssi -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:31:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:31:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 Message-ID: <20221021223144.116049-1-fontaine.fabrice@gmail.com> https://github.com/drowe67/codec2/releases/tag/v1.0.3 https://github.com/drowe67/codec2/releases/tag/v1.0.4 https://github.com/drowe67/codec2/releases/tag/v1.0.5 Signed-off-by: Fabrice Fontaine --- package/libcodec2/libcodec2.hash | 2 +- package/libcodec2/libcodec2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libcodec2/libcodec2.hash b/package/libcodec2/libcodec2.hash index 795ca37006..ba44aa015c 100644 --- a/package/libcodec2/libcodec2.hash +++ b/package/libcodec2/libcodec2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 14227963940d79e0ec5af810f37101b30e1c7e8555abd96c56b3c0473abac8ef libcodec2-1.0.1.tar.gz +sha256 cd9a065dd1c3477f6172a0156294f767688847e4d170103d1f08b3a075f82826 libcodec2-1.0.5.tar.gz sha256 9ebb6f82b7380a62ac74c5f0322c88e6744dedf2ebe1f54d6f088282b39844bf COPYING diff --git a/package/libcodec2/libcodec2.mk b/package/libcodec2/libcodec2.mk index b4f08a496e..b97db8ff59 100644 --- a/package/libcodec2/libcodec2.mk +++ b/package/libcodec2/libcodec2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCODEC2_VERSION = 1.0.1 +LIBCODEC2_VERSION = 1.0.5 LIBCODEC2_SITE = $(call github,drowe67,codec2,v$(LIBCODEC2_VERSION)) LIBCODEC2_LICENSE = LGPL-2.1 LIBCODEC2_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:36:30 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:36:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdmtx: bump to version 0.7.7 Message-ID: <20221021223630.122214-1-fontaine.fabrice@gmail.com> https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 Signed-off-by: Fabrice Fontaine --- package/libdmtx/libdmtx.hash | 2 +- package/libdmtx/libdmtx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libdmtx/libdmtx.hash b/package/libdmtx/libdmtx.hash index 98eef9aeeb..8b176d737a 100644 --- a/package/libdmtx/libdmtx.hash +++ b/package/libdmtx/libdmtx.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 be0c5275695a732a5f434ded1fcc232aa63b1a6015c00044fe87f3a689b75f2e libdmtx-0.7.5.tar.gz +sha256 7aa62adcefdd6e24bdabeb82b3ce41a8d35f4a0c95ab0c4438206aecafd6e1a1 libdmtx-0.7.7.tar.gz sha256 fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79 LICENSE diff --git a/package/libdmtx/libdmtx.mk b/package/libdmtx/libdmtx.mk index 04e089f1f7..00d37fb94e 100644 --- a/package/libdmtx/libdmtx.mk +++ b/package/libdmtx/libdmtx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDMTX_VERSION = 0.7.5 +LIBDMTX_VERSION = 0.7.7 LIBDMTX_SITE = $(call github,dmtx,libdmtx,v$(LIBDMTX_VERSION)) LIBDMTX_LICENSE = BSD-2-Clause or Special Permission LIBDMTX_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 21 22:43:57 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 00:43:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: bump to version 0.17 Message-ID: <20221021224357.129675-1-fontaine.fabrice@gmail.com> Drop patch (already in version) https://lists.x.org/archives/xorg-announce/2022-October/003226.html Signed-off-by: Fabrice Fontaine --- ...001-pciaccess.pc.in-add-Libs.Private.patch | 28 ------------------- package/libpciaccess/libpciaccess.hash | 7 ++--- package/libpciaccess/libpciaccess.mk | 4 +-- 3 files changed, 4 insertions(+), 35 deletions(-) delete mode 100644 package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch diff --git a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch b/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch deleted file mode 100644 index e520dd03d8..0000000000 --- a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch +++ /dev/null @@ -1,28 +0,0 @@ -From e1f9fc0a11559c1200005c4bfe34cd217ec117b4 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Oct 2019 19:03:32 +0200 -Subject: [PATCH] pciaccess.pc.in: add Libs.Private - -Add Libs.Private in pciaccess.pc.in so applications that wants to link -statically with pciaccess will know that they have to link with its -dependencies such as -lz - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/xorg/lib/libpciaccess/merge_requests/10] ---- - pciaccess.pc.in | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/pciaccess.pc.in b/pciaccess.pc.in -index 706c5f7..c2da3d9 100644 ---- a/pciaccess.pc.in -+++ b/pciaccess.pc.in -@@ -8,3 +8,4 @@ Description: Library providing generic access to the PCI bus and devices. - Version: @PACKAGE_VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lpciaccess -+Libs.Private: @PCIACCESS_LIBS@ --- -2.23.0 - diff --git a/package/libpciaccess/libpciaccess.hash b/package/libpciaccess/libpciaccess.hash index 2082be7d04..27ec59a452 100644 --- a/package/libpciaccess/libpciaccess.hash +++ b/package/libpciaccess/libpciaccess.hash @@ -1,7 +1,4 @@ -# From https://lists.x.org/archives/xorg-announce/2019-July/003014.html -md5 b34e2cbdd6aa8f9cc3fa613fd401a6d6 libpciaccess-0.16.tar.bz2 -sha1 ffaa13f2df5f822da1089b55223b217c142ef919 libpciaccess-0.16.tar.bz2 -sha256 214c9d0d884fdd7375ec8da8dcb91a8d3169f263294c9a90c575bf1938b9f489 libpciaccess-0.16.tar.bz2 -sha512 2f250048a270dfc0823d4bdd613aa272c58a80eaafd922850f56c4b6f7a45a263ed4cf521b52b49f04484ea44ebefb7407d079aa058318a5751ffb181e38fed1 libpciaccess-0.16.tar.bz2 +# From https://lists.x.org/archives/xorg-announce/2022-October/003226.html +sha512 8484605c66ef18c8d8a3e029a6d33e26fcaa450c1263790d89ac8b0a160ffb2dfceaa6140ac9ad7d8087283ecbec8ac801f757e44890d547c3cbecd2c922ca47 libpciaccess-0.17.tar.xz # Hash for license file: sha256 47012fd746980d1712ac4f3841ab6164bda1d2b84880760e45dbe1e1dc07f608 COPYING diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index d9a3a4e481..68d46b7f50 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBPCIACCESS_VERSION = 0.16 -LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.bz2 +LIBPCIACCESS_VERSION = 0.17 +LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.xz LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 21 22:44:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 16:44:48 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo: configure cargo profiles Message-ID: <20221021224448.3502942-1-james.hilliard1@gmail.com> The cargo profile flags currently only select a cargo build flag which does not accurately reflect the configured build settings, setting the cargo build flag also only works for packages using the cargo infrastructure directly and not with other packages using the cargo environment such as pyo3 based python packages(which indirectly invoke cargo build via the setuptools-rust and maturn python build backends). To ensure that cargo uses the correct profile settings for the build we need to set env variables for the two root profiles(dev/release) based on the buildroot build settings. For reference the default cargo root profile settings are: https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles As applications not using cargo infrastructure do not have a standard way of configuring a specific build profile due to the selected profile being determined by the cargo command line flags, the only reliable way to configure profile settings is to set both root profiles in the environment as this will ensure that they are used regardless of which cargo build flag(such as --debug or --release) is used. Cc: Moritz Bitsch Signed-off-by: James Hilliard --- package/pkg-cargo.mk | 100 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk index f7e3f39503..4945770079 100644 --- a/package/pkg-cargo.mk +++ b/package/pkg-cargo.mk @@ -46,6 +46,106 @@ PKG_CARGO_ENV = \ CARGO_BUILD_TARGET="$(RUSTC_TARGET_NAME)" \ CARGO_TARGET_$(call UPPERCASE,$(RUSTC_TARGET_NAME))_LINKER=$(notdir $(TARGET_CROSS))gcc +# We always set both CARGO_PROFILE_DEV and CARGO_PROFILE_RELEASE +# as we are unable to select a build profile using the environment. +# +# Other cargo profiles generally derive from these two profiles. + +# Disable incremental compilation to match release default. +# +# Set codegen-units to release default. +# +# Set split-debuginfo to default off for ELF platforms. +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_INCREMENTAL="false" \ + CARGO_PROFILE_RELEASE_INCREMENTAL="false" \ + CARGO_PROFILE_DEV_CODEGEN_UNITS="16" \ + CARGO_PROFILE_RELEASE_CODEGEN_UNITS="16" \ + CARGO_PROFILE_DEV_SPLIT_DEBUGINFO="off" \ + CARGO_PROFILE_RELEASE_SPLIT_DEBUGINFO="off" + +# Set the optimization level with the release default as fallback. +ifeq ($(BR2_OPTIMIZE_0),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" +else ifeq ($(BR2_OPTIMIZE_1),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="1" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="1" +else ifeq ($(BR2_OPTIMIZE_2),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="2" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="2" +else ifeq ($(BR2_OPTIMIZE_3),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +else ifeq ($(BR2_OPTIMIZE_G),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" +else ifeq ($(BR2_OPTIMIZE_S),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="s" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="s" +else ifeq ($(BR2_OPTIMIZE_FAST),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" +endif + +ifeq ($(BR2_ENABLE_LTO),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_LTO="true" \ + CARGO_PROFILE_RELEASE_LTO="true" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_LTO="false" \ + CARGO_PROFILE_RELEASE_LTO="false" +endif + + +ifeq ($(BR2_ENABLE_DEBUG),y) +ifeq ($(BR2_DEBUG_3),y) +# full debug info +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="2" \ + CARGO_PROFILE_RELEASE_DEBUG="2" +else +# line tables only +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="1" \ + CARGO_PROFILE_RELEASE_DEBUG="1" +endif +else +# no debug info +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG="0" \ + CARGO_PROFILE_RELEASE_DEBUG="0" +endif + +# Enabling debug-assertions enables the runtime debug_assert! macro. +# +# Enabling overflow-checks enables runtime panic on integer overflow. +ifeq ($(BR2_ENABLE_RUNTIME_DEBUG),y) +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="true" \ + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="true" \ + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="true" \ + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="true" +else +PKG_CARGO_ENV += \ + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="false" \ + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="false" \ + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="false" \ + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="false" +endif + # # This is a workaround for https://github.com/rust-lang/compiler-builtins/issues/420 # and should be removed when fixed upstream -- 2.34.1 From james.hilliard1 at gmail.com Fri Oct 21 22:57:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 21 Oct 2022 18:57:28 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: > > Am 21.10.22 um 18:41 schrieb James Hilliard: > > On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > >> > >> Am 20.10.22 um 00:12 schrieb James Hilliard: > >> > >>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > >>> wrote: > >>>> From: Moritz Bitsch > >>>> > >>>> The cargo --release flag is used to create optimized builds, not supplying > >>>> --release has major performance implications. Looking at this further the cargo --release flag merely tells cargo to use the release profile rather than the dev profile, however the issue of optimizations being enabled or not is really a matter of what the profile configuration is, right now we are effectively choosing between the default release or default dev profile configuration which does not properly match the build settings. Instead what we really want to do is configure all cargo profiles based on the selected buildroot build settings. Unfortunately cargo doesn't have any env variable that selects a profile, but we can sidestep this simply by configuring both root profiles(which other profiles inherit from). I think the existing cargo build flags are fine, I sent a patch which should fix the profile configurations so that they match the buildroot build settings, let me know if this fixes the optimization issue for you: https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ > >>> Is there an env variable we can use to set this instead? > >>> > >>> Some packages use cargo without the cargo infrastructure, for example > >>> we have a number of pyo3(https://pyo3.rs/) based packages that use the > >>> cargo env but not the cargo build commands from here. > >> I could not find any env variable for switching profiles. > >> > >> I had a look at python-rtoml, and the used setuptools-rust: supplying > >> --debug to > >> the "setup.py build" removes the --release flag from the cargo invocation. > > > > Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > > we also have maturin which is pep517 based. > > I'm in no way a a python expert, so take my words with a grain of salt. > > I could not find a way to specify what build profile is used by maturin > when in a pep517 build. Even if maturin supports the -r flag for release > builds when called directly. I think the real issue is actually not that the wrong build profile is being used so much as the build profile configuration itself is wrong. > > > > >>>> Signed-off-by: Moritz Bitsch > >>>> --- > >>>> package/pkg-cargo.mk | 2 +- > >>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>> > >>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >>>> index f7e3f39503..e0556252fa 100644 > >>>> --- a/package/pkg-cargo.mk > >>>> +++ b/package/pkg-cargo.mk > >>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >>>> $$($(2)_CARGO_ENV) \ > >>>> cargo build \ > >>>> --offline \ > >>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >>>> --manifest-path Cargo.toml \ > >>>> --locked \ > >>>> $$($(2)_CARGO_BUILD_OPTS) > >>>> -- > >>>> 2.37.3 > >>>> > >>>> _______________________________________________ > >>>> buildroot mailing list > >>>> buildroot at buildroot.org > >>>> https://lists.buildroot.org/mailman/listinfo/buildroot From thomas.petazzoni at bootlin.com Sat Oct 22 05:34:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sat, 22 Oct 2022 05:34:47 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-21 Message-ID: <20221022053453.AB4EB40194@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-21 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 1 | 0 | 4 | 2022.08.x | 13 | 13 | 0 | 26 | master | 112 | 231 | 10 | 353 | Classification of failures by reason for master ----------------------------------------------- sysvinit-2.99 | 19 crun-1.5 | 15 host-sentry-cli-1.59.0 | 15 libnss-3.84 | 13 glibc-2.36-44-g2628500f5dff... | 12 host-f2fs-tools-1.15.0 | 12 brltty | 9 host-pahole-73383b3a39afe86... | 7 host-rust-1.64.0 | 6 libarchive-3.6.1 | 6 systemd-250.4 | 6 xz-5.2.7 | 6 btrfs-progs-5.16.2 | 5 efivar-38 | 5 linux-6.0.1 | 5 gerbera-1.10.0 | 4 linuxptp-3.1.1 | 4 perl-5.34.1 | 4 unknown | 4 batman-adv-2021.4 | 3 dahdi-linux-5c840cf43838e06... | 3 elfutils-0.186 | 3 gensio-2.5.5 | 3 host-binutils-2.38 | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 igd2-for-linux-2.1 | 3 libglib2-2.72.3 | 3 libgpg-error-1.45 | 3 dash-0.5.11.5 | 2 gobject-introspection-1.72.0 | 2 libcap-ng-0.8.3 | 2 ocf-linux-20171122 | 2 quickjs-2021-03-27 | 2 uclibc-1.0.42 | 2 acpid-2.0.33 | 1 alsa-lib-1.2.7.2 | 1 autofs-5.1.8 | 1 bluez5_utils-5.65 | 1 botan-2.19.2 | 1 exempi-2.6.1 | 1 frr-8.3.1 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.39 | 1 jemalloc-5.3.0 | 1 libcurl-7.84.0 | 1 libgcrypt-1.10.1 | 1 liblog4c-localtime-1.0 | 1 libqb-2.0.6 | 1 libvorbis-1.3.7 | 1 linux-tools | 1 liquid-dsp-1.4.0 | 1 lpc32xxcdl-2.11 | 1 luaossl-20220711-0 | 1 mariadb-10.3.36 | 1 mtd-2.1.3 | 1 openal-1.22.0 | 1 openssh-9.1p1 | 1 openvmtools-11.3.5-18557794 | 1 opus-1.3.1 | 1 procps-ng-3.3.17 | 1 proxychains-ng-4.16 | 1 putty-0.76 | 1 pv-1.6.20 | 1 rauc-1.8 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 usbguard-1.1.1 | 1 wolfssl-5.5.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/a4428059ca2001ef0ec8b233a03853a30588b70d | ORPH mips64el | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/e7b8a80a9c03644e6099fa8d6eee0df959e50f0f | or1k | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a199fe0aa457668e91e1d4dcfaa73be00ce316e5 | powerpc64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b3528c5886bcf8e6db5e279764542c03a874586d | armeb | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/f61646ed8d4ddc520723287dd98af21e8d0c6a26 | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/b28048cd57746d75f9a664ded8b9267a7d17f2bd | sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/89e6f012971698e0f365ce2886488dd3268c0790 | mipsel | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/b27f53884fc41fd802eb61b4a0d5e58dd5db5727 | ORPH arc | brltty | TIM | http://autobuild.buildroot.net/results/dd08c305437a04cac3a349ceeaa394282fd01164 | mips | brltty | TIM | http://autobuild.buildroot.net/results/4790214bbe0f932c02beaa8884af0fb68338aacf | riscv32 | brltty | TIM | http://autobuild.buildroot.net/results/1c7fbec2bb4d444f4fe5b98b328873aae84c9399 | sh4 | brltty | TIM | http://autobuild.buildroot.net/results/98cc654fe7a9bad2e0afc1d92a2bf83b581e5227 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/5fba1da10b888becd251bf7da383ce11f6d328cb | s390x | brltty | TIM | http://autobuild.buildroot.net/results/489f0b1e6d531a0c3d5f05ef30d071bed9067e86 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/87f2eed7462b8ca57cc191fce0c08177ea498167 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/db0eaa716729d8f51cb0efff3f4865d2c68a0d79 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/dca4b18cfe5fedf768b719c5c1e83ca7a4bc60ec | mipsel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a2936ba90866bf5a781a620f8aa8617bb7bc5b2a | ORPH sh4aeb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b72e31d86c882dc8f7363fbc27efa4ea5fe564e1 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e55e59d715775317b78ee601a55f6382af7b1d07 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9a8157a9fc68443267260eb11be401de9cd4b6c3 | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/6429c983c9c571db4504dc8f1faddc8d97eb101e | ORPH nios2 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/faaa5eb138afa382ef16e9366d4690809975fe87 | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/762bcbbea2d101097f8534bbd608b63732b45968 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/22d214c665292baf9026433e97f8245b02ded0c0 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/112c01ada3023b2529c788e6a3f2e3bcd3316f60 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/71e79a12be2a38dc9ebe580ebe5a46b23016c739 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f079d1d180e45e2f9c2f05de71f436ba17611668 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c8decbf5e3fc47ef66edc4a0ac1a61b20aedd0a6 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3ea798054ab31245498572aa98161fedaa0c062f | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9102ff9206815f3600a851e1486d2e15cb1f8ab0 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c640227aa7a32528b6bc8b947fdadf8d553c26ac | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/811f7fc7112e3b575120ff4406e74fccd2434a3c | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/242674282ae8c0473e4206af6c5c3d6562a2eab6 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0f262000d19963af671539d6bcb6dd6b25449cf | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0b2b27b82d2ed049accfbc4a28e89d8233b99475 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/cd382dd1b57e2264d28cdacf3f00ed204b3622ca | i686 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/463b7ac2da7fc2b43290e2f6060dd320559344d1 | xtensa | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3372b25762b00eeb7230c70952e493456b3b2670 | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/dc7f0f56e01fb4ae5b993aada6e57c5a4d419d87 | powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/5d70e90aff7d7affce049f0fb50f846ac4911d13 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/85dce21ba7d94d5d7ab3a077f4fcf98f6e3f64fe | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/96c158d39512fa9dffff3a5ce7522cb8a6433063 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/3d097a86fa24f812f4b18c379e5dbc94a6ccd057 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/44c46de36d46d832ab7eefef848163dd792d6b08 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/5f0b7346ed62746469a432ec24032d63520ab16a | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/f8fcb093ce6c68230c9467a2a20ae3d447f7010f | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/1a6f31415db678b76bc866f994d8e64b2e91c285 | ORPH arc | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/f921b000edab30ed09965575cc0725ddaac266c6 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/378305066f1e2404e336ea542414869399b3bc42 | ORPH mips64 | exempi-2.6.1 | NOK | http://autobuild.buildroot.net/results/264ba84fbe53388d5047c5fd318dd45469ff5731 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/415560ee93e56166f197ddbcee4bdecf45561f6b | aarch64_be | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/419f17150bd48fadce1627e30d06c8171351edaf | mips64el | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/23f564e3eac6e936309d146d5c23165a8d5de236 | mipsel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/69b5d9aa8b366dae9789d338afdf1d8c7bb214b0 | or1k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/b8043621f941269efc839ed5c48b80bbda1fd3de | arm | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/ef81f63df0e414eaf3d8a4398a0b28e321c94554 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/98c91570d5a9cf8e6b8e3cb1c1a2d558fa87bced | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/7e5bd50835fdd07a3edf33adbd04a17e94325893 | s390x | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/5e101bb2deef369038066acec3001b75d2930f25 | aarch64_be | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/da304f4353aee0b736b4e567243050452a2a32aa | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fe57ac66f15cfbf784a637c444546b62aaadadb5 | powerpc64le | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/55d044fb750e8c125b0aed7f349ea9c6357fd1b5 | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/acdfa6e8f083d44d4345c660991c17923c42f9a8 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/1cb9e4ed65ee0f0e85e432906ec0b0d4014578cb | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a9d249534b17cb292bdda3ba9c0fc7e1cefeea2d | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0bc7c8a685c62d5ad590aa5bbf2983c69a935347 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/af1fb36f7d972b6fd26b628f00d4f2a50db4f609 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/46d7934778c71842900256d969c0dd909179b886 | powerpc64le | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2a75837b10e81d998d774db1299d45ddd814ab14 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0d2c446f623c5e21889ed3202842f145959aee25 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/00d692b9b850ef22ca852e417bedab78adfe2e2c | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/71773b014233101be286f161ff8cf790b77f32e7 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/69047305cd9fc8b6ad9194dfa425883bf637c0b5 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/13cbbb1200092a4b9f0521b968eb2ba0467322a9 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/265073aa19e5b620ec8deb89af43350af223505d | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/4894b162f97e369d2f179975562894cba28a8a55 | ORPH microblaze | gobject-introspection | TIM | http://autobuild.buildroot.net/results/689dfa172beaf4d4d22830ad95ef2b0b884080af | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/93700865cea12b293e382a934e74529b6b624591 | ORPH s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8001ae95b618c4a80fca4aa28590e545d62dbe08 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/78c8880e032d2ae525f16afee4beef9cb6f3e5a3 | microblaze | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/531b945ad24ecd8aac2f59cf8f5a24d52dba323c | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/168f4cb76be3a1564dc9e84cabe152a8132326c4 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ea0513d72aab0ec9b16448c5389c864fcb3251e5 | m68k | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f2c07067d573870f85ff05e7ab8e53ac76c4105f | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89bbdf6098803fb927036bb8f253b658dccf6e41 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3292e29f47adc2a642f981bfd9b29de0440c770f | riscv64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dfad7f18b06ce2d3a400746f9c590762b0acf209 | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/37724bce05dabb55694984357858fa95e144610d | sh4aeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cd66f9c99ce3f3c27727d02589ded96c4faf3b8d | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b739e5cf6d97e99b571e4678730ee31606db51bb | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/27c7345a3bac3ba2a4acad46d919f0843a74c083 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/96c71d86657e99e297442016653e6c36fb65dd53 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0bb06d325d4d976e7b9ded4e85a3165b70ad051c | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5802784f6616c3be4835f2cb4080dbbc8d678037 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/99f6cddfadcee94e117775dbedcf476c997a1678 | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d84e831eef749f79eecfb5e4b84ba5424e69402b | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/b82aa041534288528a20b4955cabe118eea2e0f1 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/07dce54f02a7569aa8dc7b00b590cf80c183f2d4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/a34289d87231f652ecf235d79991c2592e07ab48 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/b770124ec8d0dbf47dc03415c67bce694310ffe3 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e8734352b93bff900af9ea1d32d2c60d5382a225 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/7e9a976e0714c3282804fadd9d1b11da4981cbed | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/670c687ea8620f957b32a37a03dc1b80f0debaa7 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/5f6ad76cd8a506b67a578b28051ea51c40c9d17f | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/63b707c985095134f5501404134714363fb2082e | powerpc64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/21eca8bc9bb03523a4b73c66c38c4aaf4b6036af | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b67c62b0c1201691c4bdd5eac762c2e875790003 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b26915ccd827e217ea8ccd8373bc39d02b5f7b40 | powerpc64le | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/df3ce57b09f7cbea87115a32e854e8579f0201f7 | armeb | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4f2c090e7377ee6574dc8ff31c434509059a6345 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/29e0bd7b85cc504617fba80733b5b749346a2a93 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/4e3b8eb552c70f4db377111414d343c551d04806 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/6f4182da6074a42cfbe6b61a8e2a08b823ccd04a | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bdc75181a445e89dad114ae3f6f1fe11a58d5d4b | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f6dc8a12388eeb8f0242433255ee6cdad03b1ee | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/beb74e934a679901d46214857bd858c656c69370 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ba7294ecdd7a29adc6a7be551816a97ec796a01e | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/86f3e2db7bd740fc9696a08c325af76af8b7edac | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/754c296230e41d44cecb3e80fbc6757350c12240 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4065c94664504e8576c928fc895e0c290a8b3125 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4472b25933650b6f518008cf01c2a29e0e5f7c11 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/74affbd4cc393de33490149f8dec58b936921d36 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b861d55bc5f06dd322d08b6d56bea329f9f3842f | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/53ade4317a0dd8a61ef51aad6fea93bbc3f836c1 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d6517e84309d54349d1fbb8f7a73f1c929b3c4c9 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/020fe2fca315aea01a7d7928173dd1d2b6c42198 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/be5e28681407273781ac8a77588c49334f2f7f6b | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b7be5f601e338d4130dc4bd6c248a7bfda24ee72 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/81a5021a4468f87742cf676ae19f731773e6f4b1 | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/97567fd063d1492504ecc9976b6078dd890b6ff3 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/92288db9f0c81e116e3f452a8afa0a5b55f4942b | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e6112f514808a72285dca09bfb3268cab0a06e8c | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ad8e7be15146127c86f79d14fde6fe2cceff2d36 | sh4a | jemalloc-5.3.0 | NOK | http://autobuild.buildroot.net/results/b5fe739cb5f347aa8ea4b5b094075d92a8dd9b53 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b9db26e7905ba1a59ea175851a6f4a692eecb7ec | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aeac3dc8106a4cdfe3e417fa66e902b60cb3d519 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1def3966dc8161399f6e85a81b14aa182f83d3f1 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b4cff1684a16297d7d9e58baf415baeb02f054e4 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/feffa4ed1087d39cbf738ef6d35f794d2e168504 | s390x | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bc279853f60b97fbbda9c1b3dc8e974a07659aab | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/9733477141a9a43bdd2bbb429ec6c172e813fbf2 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/87f5c52675bb10fd0abad41ff1b11a601296d920 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/6f635af6bcbe2a00967dd8dc92811b37658b8cc3 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/1b533bd5883d861bf52fc148d1ff4ad5cb169789 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/691f146e2e69c73244a25a99647fbfc1830401e9 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2e9a7228f845f5fd1d701a7f0076a7c1c0957295 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/8b45d1917c155c553c1fee96de41bc4b8c1e9808 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/2d0b03132fc429e965dcbc9f3eaf441c63e7f039 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/80f0e44c9eefa197d5a004d9551f59851f78dde1 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/94dbfcf7165a8c9290637717ff89df5de53cabbe | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/576a3fdb2092d620dec0f53414bbc0347d3b1ef6 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0e1be660fc206b2501ebc18424db3c3f1c936612 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1efed21659fe2b4331dfa2d0cb834853e0de8668 | sh4eb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/73f8c653c319b65e5e81484d52fa66cd9126ddd9 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ce8d3291c51f59a6bc3ba9fa08239fcbe432b993 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8af849b00cde45a1a12e9456cf542c39ef6d3c66 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/fbe66901b4ed1fda6b5080e66a80476e35668609 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d22d36a1633404f449a0cfc4d2a199be9a46c8d0 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/acefcd37eef5b10715bffc05833be12a8eba8924 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b91934f3decf5890d9ebe9d49ec04c14c2f8e86c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/25cf95b3fd94ce27d5a9c04fb68b56cec90dc221 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b39c957b6aadbf5349808fc651aa4d1bce28d8a7 | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d51e0007327ce0dabe731511e580792bb0f52b46 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ea97128ffda6369235251827eed009b24b012d8 | mips64 | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/55b4acda3555c1e0134a3a8967849da1d9e50032 | powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/54ad7a600488c6dfa06371a489837feda90661a1 | s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/85b57b7896acbfc261533d510e277918bb7935aa | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/aae94d4680c08140f509c86eea837ee43e781830 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e0c5b7aca1feda5759c4e69a0989c06289a4fd6b | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/903ade5ff0053ecf0487b5b19f14413e1762e9e0 | ORPH microblaze | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1374cb97ee73997695cd583396b2b13713d29d05 | ORPH m68k | linux-tools | NOK | http://autobuild.buildroot.net/results/cdedaa1eb7c2e744fb3b127cf03e8e580146ac6c | ORPH mips64el | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/8c7ea4eba7e26a2f0b2b1b57ae0b4d8e557a1f4e | xtensa | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/c5600b603cecd4df8b3b7f043738f305688349e8 | sparc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/3f570165eb0a70f8f32b8ee97bc39baede047ad4 | mips64el | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/ee39e8052fc5b693a645aa070244c3d4da91aad3 | sh4aeb | liquid-dsp-1.4.0 | NOK | http://autobuild.buildroot.net/results/ac1a37d1c87739718cffad42f2bfb49adce4c028 | armeb | lpc32xxcdl-2.11 | NOK | http://autobuild.buildroot.net/results/2ef74e295913d81393e8d586243255933cbcd7a5 | ORPH arc | luaossl-20220711-0 | NOK | http://autobuild.buildroot.net/results/343b57d4eec4b28841023dabed5f92ee9fccecfe | or1k | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/8cbe531f77d64b011d88620805622a90b37508d1 | ORPH arc | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/a903c4cda2f62fd53bfd836a1e47123f869c413e | x86_64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/4e32f701a36b9c33fe0119e2cdc529625ba9bae6 | ORPH mips64el | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/89ded53cad7dd6a52f5e58e0cac58e6fdd1ddf7a | ORPH mips64el | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/7030667369c5852bb935dc5922a49f743ab07c04 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/7e0174f98f280a36c0172c8aaf1e02e425f2ca6a | ORPH x86_64 | openvmtools-11.3.5-18557794 | NOK | http://autobuild.buildroot.net/results/eb277fb780fc4d9ff3a0791910ecd3274d61cd5d | armeb | opus-1.3.1 | NOK | http://autobuild.buildroot.net/results/0a7d524511aaca6eba479938bfd948cfd5f62021 | ORPH powerpc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/7eb04a16d8c880e9e645843bb197795fbb617deb | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/25edfe1ccfc0ec4d6d98479db41808d296e54fe0 | or1k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3fa631d5c8722772dcb00fe62dc50e6b68ba45b9 | x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/73da13f2d05a58aa8ccdfb17d17b7da1038646c6 | armeb | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/0dc6601189c9e087f821a82ee98709044e9ea0e3 | ORPH mips64 | proxychains-ng-4.16 | NOK | http://autobuild.buildroot.net/results/b696abb67595b4e4a3c40b2380691aebbc261550 | ORPH aarch64 | putty-0.76 | NOK | http://autobuild.buildroot.net/results/6f73a3b4841a958dd95b1651a6213ae5b9a033ca | armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/7f8641566dd9b175e6a669e1f85340d1d81e97e5 | ORPH arm | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/191ca86f080406b5b236ae2b8316c48fbb671b9d | sh4 | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/94fe498f2403fd249087e7241dbf870076d62e1b | or1k | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/b6df9ba1d2a32fb5014f15cf5641b230a1c8867b | powerpc64le | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6d3d8f16688c340c4bf4690016b8cb9a2b7a857c | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bd2f476a13f62e48c0650ce02d309bfff40ddfb2 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ae97cbc97be84e74d1e21a5aa69e2465808b3c38 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/7ffed8c2731ab278702eb25a78e8d56a248c04b9 | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d3035d56d532ead4d2cae24e66bfc9ceceb8b35a | mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0ab38e9c2f608a08b7d5ae955cc2152ddf437b67 | arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b888bbdc4d4b6c6f24c279879b52187a334d11ee | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c140eb2ff9ae243d21b4dfe88629ae1d234e2af1 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/dfd5e2f2dad9f36c85b22d503b70b5d4923eaed7 | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bf6843b11f127dd451e30f98dafc640e3f1c2882 | ORPH mips | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d199d6d83997092416a9a216406d4666c1e4ac66 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5a42c22f66d141dfecf1ed5878ceca66254a3f7e | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/191b3c05300b072b7d1f2679fa3fa72a1a128e94 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f04f6a8effe17880300bd387678408b9127a1fb5 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ad1523d4ae276630dc9d7730a9bcb31e9a2211e0 | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/442d6c0be9aedbdcccff888e997f43f91f068726 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/941c5fdc711e64f420d091078c3401117627e217 | ORPH microblaze | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/59ae9f665a669ef1100944bb98d195b80e46c952 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/b7873bbc278471d086c7a6d6ab0bdca387ec2f83 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/05f0ca8d22480df8a351e0ced43e20190934fa54 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/41dfb90ea473ecaa43965a6ab19409923a826cea | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e8ca89853f72be68a40cbef6e420f4233020fae0 | ORPH sh4a | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cfdec513ebfd6a216e9119412d47d7acc7a4eda3 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/e23c4393e5bd18589f20ccd5233c3ca01408a0c1 | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/42f9ed68b6a5f0ae6af51c1a01fc1e4f0dac9a4d | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/c23483e8b98aa63414fe78708f53df230f68452c | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/b535155f3529584d4b75206d88f9a1ad5ed91761 | arc | unknown | NOK | http://autobuild.buildroot.net/results/c6fa79f2f86a246f115831a7b2d9f7d6d1ba823f | armeb | unknown | NOK | http://autobuild.buildroot.net/results/d9e7ba23d385830cb2756b6b7b9791f8cb88ed64 | m68k | unknown | NOK | http://autobuild.buildroot.net/results/0c9432638f9e0f5343cd6b08e87abeae44fa1657 | arceb | unknown | NOK | http://autobuild.buildroot.net/results/55ae6d63e40516df1abb6ef37a705f2604c17d14 | arceb | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/8ac76c18c2fc4f3e2263b8fbe0e99075f7f8b7a6 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/732c1baa0f0a31c420231676e5ad44591494b7c7 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/10174ec91734c78a74907b015cd52568ec36b6f8 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/67cf195dfa937d89e0f489d06bfd468414384f6f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fa4aed94e94f48f1ae6de9cc1c66f60bb2e47a22 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bc5a3d085b3bd2cc3bfa607677cb6cd5ea7e7966 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4eeed19efdddb24eddc8b407ef0c470724e24795 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b5edb59bc87e7ceb019d422c63961129f30fca2d | ORPH xtensa | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/ef525951cd10ab587e0fbf240e03330d8bddad18 | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/591a8cfa28b1c9bf4c409297ccdae7210de0a013 | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- frr-8.1 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | frr-8.1 | NOK | http://autobuild.buildroot.net/results/1675a5d749a8cbb199adc3128ca914996351051d | Classification of failures by reason for 2022.08.x -------------------------------------------------- gerbera-1.10.0 | 2 glibc-2.35-134-gb6aade18a7e... | 1 host-pahole-73383b3a39afe86... | 1 igd2-for-linux-2.1 | 1 libglib2-2.72.3 | 1 open62541-v1.3.2 | 1 openssh-legal-info | 1 pistache-3ec9d7c4f8b828fdd3... | 1 python-sip-4.19.25 | 1 unknown | 1 volk-2.5.1 | 1 waffle-1.7.0 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/80f8939e67f72b780ae98733dafcb216826301aa | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/1b98b6757b2d78b636fa07ac7253625986bf260a | sh4aeb | glibc-2.35-134-gb6aade18a7e... | NOK | http://autobuild.buildroot.net/results/53df0773ece9005faea74c4f2c70b21548ba2929 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/217258f3ec31452cc101fe9d28237d409b674b04 | arceb | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3fec2f94179c88c7181b2fb69236ffc08ccb86da | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/449945b46fae4338051366cdfe26ba8ae88d9b39 | armeb | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/6703faac5b9894f3a545241ff5ca119d7ba12181 | ORPH arm | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/49fce75e077d926422242e622f7b5e63a8ed9c49 | ORPH arm | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/3fd0c2fd050c0a91d4f755151b68fc9f4811ce41 | ORPH arc | python-sip-4.19.25 | NOK | http://autobuild.buildroot.net/results/a9c0866b218817f315b3b2f490878c9ede19448b | arceb | unknown | NOK | http://autobuild.buildroot.net/results/aa431496a75cf7167faf064aab89085805ec1dd5 | arm | volk-2.5.1 | NOK | http://autobuild.buildroot.net/results/32ba29e7383f6b7c22ee99627d4e38b2367014c2 | riscv64 | waffle-1.7.0 | NOK | http://autobuild.buildroot.net/results/b8acabd3fa0c67d71b526b34e8f2a463d1bc0e4b | Gitlab CI results for 2022-10-21 ================================ Detail of defconfig failures for master --------------------------------------- defconfig | link to the job | orph? ----------------------------------+---------------------------------------------------------------+------ amarula_a64_relic | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497934 | arm_juno | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497944 | atmel_sama5d27_som1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497964 | atmel_sama5d2_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497967 | atmel_sama5d3_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497969 | atmel_sama5d3_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497974 | atmel_sama5d4_xplained_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497977 | atmel_sama5d4_xplained_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497982 | bananapi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497987 | bananapi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497990 | bananapi_m2_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200497992 | bananapi_m64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498000 | beelink_gs1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498032 | freescale_imx6dlsabresd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498071 | freescale_imx8mmevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498078 | freescale_imx8mnevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498079 | freescale_imx8mpevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498080 | freescale_imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498082 | freescale_imx8qmmek | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498084 | freescale_imx8qxpmek | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498085 | friendlyarm_nanopc_t4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498090 | friendlyarm_nanopi_a64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498091 | friendlyarm_nanopi_m1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498092 | ORPH friendlyarm_nanopi_m1_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498093 | ORPH friendlyarm_nanopi_m4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498094 | friendlyarm_nanopi_neo2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498095 | friendlyarm_nanopi_neo4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498097 | friendlyarm_nanopi_neo_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498098 | friendlyarm_nanopi_r1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498099 | imx6-sabresd_qt5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498109 | imx8mmpico | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 | imx8mpico | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 | imx8mqevk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498121 | kontron_bl_imx8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498124 | kontron_pitx_imx8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498126 | mender_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498137 | ORPH microchip_sam9x60ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498140 | ...hip_sama5d27_wlsom1_ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498142 | microchip_sama5d2_icp_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498144 | microchip_sama7g5ek_mmc_dev | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498147 | minnowboard_max | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498149 | nitrogen8m | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498170 | nitrogen8mm | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498172 | nitrogen8mn | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498173 | nitrogen8mp | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498176 | olimex_a64_olinuxino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498195 | orangepi_lite2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498205 | orangepi_one_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498209 | orangepi_pc2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498210 | orangepi_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498215 | ORPH orangepi_prime | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498216 | orangepi_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498219 | orangepi_win | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498220 | orangepi_zero_plus | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498224 | orangepi_zero_plus2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498222 | pc_x86_64_bios | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498226 | pc_x86_64_efi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498229 | pcengines_apu2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498232 | pine64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498234 | pine64_sopine | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498236 | qemu_arm_vexpress_tz | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498249 | qemu_ppc64_e5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498274 | qemu_ppc64_pseries | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498278 | qemu_ppc64le_powernv8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498280 | qemu_ppc64le_pseries | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498284 | qemu_ppc_bamboo | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498286 | qemu_ppc_e500mc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498287 | qemu_ppc_g3beige | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498291 | qemu_ppc_mac99 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498293 | qemu_ppc_mpc8544ds | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498294 | qemu_riscv32_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498296 | qemu_riscv64_nommu_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498297 | qemu_riscv64_virt | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498298 | qemu_s390x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498301 | qemu_sh4_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498304 | qemu_sh4eb_r2d | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498307 | qemu_sparc64_sun4u | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498309 | qemu_sparc_ss10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498311 | qemu_x86 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498314 | qemu_x86_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498313 | qemu_xtensa_lx60 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498316 | qemu_xtensa_lx60_nommu | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498317 | raspberrypi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498332 | ORPH raspberrypi0 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498320 | ORPH raspberrypi0w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498321 | ORPH raspberrypi2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498323 | ORPH raspberrypi3 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498326 | raspberrypi3_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498325 | ORPH raspberrypi3_qt5we | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498327 | ORPH raspberrypi4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498330 | ORPH raspberrypi4_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498329 | ORPH raspberrypicm4io | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498334 | ORPH raspberrypicm4io_64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498333 | ORPH raspberrypizero2w | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498336 | riotboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498337 | roc_pc_rk3399 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498339 | rock64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498340 | rock_pi_4 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498341 | rock_pi_n10 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498342 | rock_pi_n8 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498343 | rockpro64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498345 | roseapplepi | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498346 | s6lx9_microboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498347 | sheevaplug | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498349 | sipeed_maix_bit | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498350 | sipeed_maix_bit_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498352 | sipeed_maix_dock | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498353 | sipeed_maix_dock_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498354 | sipeed_maix_go | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498356 | sipeed_maix_go_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498357 | sipeed_maixduino | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498361 | sipeed_maixduino_sdcard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498362 | snps_arc700_axs101 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498363 | snps_archs38_axs103 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498364 | snps_archs38_haps | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498365 | snps_archs38_hsdk | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498366 | socrates_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498368 | solidrun_clearfog | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498369 | solidrun_clearfog_gt_8k | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498370 | solidrun_macchiatobin | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498371 | ORPH spike_riscv64 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498372 | stm32f429_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498373 | stm32f469_disco_sd | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498375 | stm32f469_disco_xip | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498376 | stm32mp157a_dk1 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498377 | stm32mp157c_dk2 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498379 | stm32mp157c_odyssey | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498380 | terasic_de10nano_cyclone5 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498382 | toradex_apalis_imx6 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498383 | ts4900 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498384 | ts5500 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498385 | ts7680 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498387 | uevm5432 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498388 | visionfive | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498389 | wandboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498390 | warp7 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498391 | warpboard | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498392 | zynq_microzed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498394 | zynq_qmtech | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498395 | zynq_zc706 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498396 | zynq_zed | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498398 | zynqmp_kria_kv260 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498399 | zynqmp_zcu102 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498400 | zynqmp_zcu106 | https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498401 | -- http://autobuild.buildroot.net From neal.frager at amd.com Sat Oct 22 08:26:45 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 02:26:45 -0600 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package Message-ID: <20221022082645.20505-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.mk | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..8ba91918f7 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" + +define HOST_BOOTGEN_BUILD_CMDS + $(HOST_MAKE_ENV) $(MAKE) $(BOOTGEN_EXTRA_CFLAGS) -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From neal.frager at amd.com Sat Oct 22 08:28:24 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 02:28:24 -0600 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package Message-ID: <20221022082824.35440-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.mk | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..8ba91918f7 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" + +define HOST_BOOTGEN_BUILD_CMDS + $(HOST_MAKE_ENV) $(MAKE) $(BOOTGEN_EXTRA_CFLAGS) -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From peter at korsgaard.com Sat Oct 22 09:09:05 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 22 Oct 2022 11:09:05 +0200 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022082824.35440-1-neal.frager@amd.com> (Neal Frager's message of "Sat, 22 Oct 2022 02:28:24 -0600") References: <20221022082824.35440-1-neal.frager@amd.com> Message-ID: <87a65o443y.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: Hi, > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > +################################################################################ > +# > +# bootgen > +# > +################################################################################ > + > +BOOTGEN_VERSION = xilinx_v2022.2 > +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) > +HOST_BOOTGEN_DEPENDENCIES = host-openssl > +BOOTGEN_LICENSE = Apache-2.0 > +BOOTGEN_LICENSE_FILES = LICENSE > + > +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" > +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" I have a package for bootgen as well at $WORK, where I instead use host-pkgcon which is a bit nicer than these hard coded values, E.G.: HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf define HOST_BOOTGEN_BUILD_CMDS $(MAKE) $(HOST_CONFIGURE_OPTS) \ LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ -C $(@D) endef Bootgen also use modern C++ features, so we need to pass -std=c++0x to fix building on older host machines, E.G.: CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" I also had issues with linking with the embedded copy of flex if the build host has the flex development package installed unless I add the following patch, which unfortunately is still not merged: https://github.com/Xilinx/bootgen/pull/20 Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. -- Bye, Peter Korsgaard From neal.frager at amd.com Sat Oct 22 09:22:39 2022 From: neal.frager at amd.com (Frager, Neal) Date: Sat, 22 Oct 2022 09:22:39 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <87a65o443y.fsf@dell.be.48ers.dk> References: <20221022082824.35440-1-neal.frager@amd.com> <87a65o443y.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, Thank you for the quick feedback. > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > +################################################################################ > +# > +# bootgen > +# > +################################################################################ > + > +BOOTGEN_VERSION = xilinx_v2022.2 > +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) > +HOST_BOOTGEN_DEPENDENCIES = host-openssl > +BOOTGEN_LICENSE = Apache-2.0 > +BOOTGEN_LICENSE_FILES = LICENSE > + > +BOOTGEN_EXTRA_CFLAGS = "LIBS=$(HOST_DIR)/lib/libssl.a $(HOST_DIR)/lib/libcrypto.a -ldl -lpthread" > +BOOTGEN_EXTRA_CFLAGS += "INCLUDE_USER=-I$(HOST_DIR)/include/openssl" > I have a package for bootgen as well at $WORK, where I instead use host-pkgcon which is a bit nicer than these hard coded values, E.G.: What do you mean by $WORK? > HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf > define HOST_BOOTGEN_BUILD_CMDS > $(MAKE) $(HOST_CONFIGURE_OPTS) \ > LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ > INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ > -C $(@D) > endef Ok. I will update this for v2. > Bootgen also use modern C++ features, so we need to pass -std=c++0x to fix building on older host machines, E.G.: > CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" Ok. I will update this for v2. > I also had issues with linking with the embedded copy of flex if the build host has the flex development package installed unless I add the following patch, which unfortunately is still not merged: > https://github.com/Xilinx/bootgen/pull/20 Thank you for sharing. I will push this internally to see if we can get this prioritized. > Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. Would you mind giving me instructions for generating the bootgen.hash, so I do not need to search for it? Thank you for your help! Best regards, Neal Frager AMD From peter at korsgaard.com Sat Oct 22 09:52:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 22 Oct 2022 11:52:01 +0200 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: (Neal Frager's message of "Sat, 22 Oct 2022 09:22:39 +0000") References: <20221022082824.35440-1-neal.frager@amd.com> <87a65o443y.fsf@dell.be.48ers.dk> Message-ID: <875ygc424e.fsf@dell.be.48ers.dk> >>>>> "Frager," == Frager, Neal writes: Hi, >> I have a package for bootgen as well at $WORK, where I instead use >> host-pkgcon which is a bit nicer than these hard coded values, E.G.: > What do you mean by $WORK? Simply that I have done it for an internal Buildroot external tree that I use at work. >> I also had issues with linking with the embedded copy of flex if the >> build host has the flex development package installed unless I add >> the following patch, which unfortunately is still not merged: >> https://github.com/Xilinx/bootgen/pull/20 > Thank you for sharing. I will push this internally to see if we can get this prioritized. Thanks! >> Please also add a bootgen.hash file with the hash of the tarball and LICENSE file. > Would you mind giving me instructions for generating the bootgen.hash, so I do not need to search for it? It is simply a question of running sha256sum on the tarball and LICENSE files. See https://buildroot.org/downloads/manual/manual.html#adding-packages-hash for details. -- Bye, Peter Korsgaard From neal.frager at amd.com Sat Oct 22 11:22:43 2022 From: neal.frager at amd.com (Neal Frager) Date: Sat, 22 Oct 2022 05:22:43 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package Message-ID: <20221022112243.31889-1-neal.frager@amd.com> This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager --- V1->V2: - improved build statement to support older hosts - added bootgen.hash --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.hash | 3 +++ package/bootgen/bootgen.mk | 25 +++++++++++++++++++++++++ 5 files changed, 40 insertions(+) create mode 100644 package/bootgen/Config.in.host create mode 100644 package/bootgen/bootgen.hash create mode 100644 package/bootgen/bootgen.mk diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.hash b/package/bootgen/bootgen.hash new file mode 100644 index 0000000000..5d77c164f3 --- /dev/null +++ b/package/bootgen/bootgen.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 7e07c75aa3e3965c8e33faefde037877f78130451cebc2056b096db9c66acbb3 bootgen-xilinx_v2022.2.tar.gz +sha256 4da5f5eff0592e5d275f1871faf9e9a4fc0f6346027bfb777fa59d0aa6a59aa3 LICENSE diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..4589bf019f --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,25 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +define HOST_BOOTGEN_BUILD_CMDS + $(MAKE) $(HOST_CONFIGURE_OPTS) \ + LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ + INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ + CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" \ + -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) -- 2.17.1 From ju.o at free.fr Sat Oct 22 14:20:40 2022 From: ju.o at free.fr (Julien Olivain) Date: Sat, 22 Oct 2022 16:20:40 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m,mm}pico: disable ATF SSP Message-ID: <20221022142040.625468-1-ju.o@free.fr> imx8{m,mm}pico configs are currently failing at ATF link with output: aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' The ATF version in those configs does not provide platform level support for SSP. This build failure was introduced by commit 09acc7cbc91f50305730ca0690a58fb93529034b "boot/arm-trusted-firmware: fix SSP support". Before this commit, ATF SSP was globally disabled, by default. This commit fixes those build issues by disabling the ATF SSP in the defconfigs. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 Signed-off-by: Julien Olivain --- configs/imx8mmpico_defconfig | 1 + configs/imx8mpico_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/imx8mmpico_defconfig b/configs/imx8mmpico_defconfig index 7c19c8c81b..55fd2d01c1 100644 --- a/configs/imx8mmpico_defconfig +++ b/configs/imx8mmpico_defconfig @@ -22,6 +22,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/e BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="lf-5.10.72-2.2.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y diff --git a/configs/imx8mpico_defconfig b/configs/imx8mpico_defconfig index 55746fb67e..d7e5b6273a 100644 --- a/configs/imx8mpico_defconfig +++ b/configs/imx8mpico_defconfig @@ -22,6 +22,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/e BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="lf-5.10.72-2.2.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -- 2.38.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:10:52 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:10:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221022201052.28903-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Config.in.legacy | 7 +++++++ package/usbredir/Config.in | 12 ------------ package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 16 +--------------- 4 files changed, 10 insertions(+), 29 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..39b00547c8 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,13 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + help + usbredirserver has been dropped by upstream since version + 0.13.0 + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..2190cb88ac 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR 'y' below if you want the server too. http://www.spice-space.org/page/UsbRedir - -if BR2_PACKAGE_USBREDIR - -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" - help - If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. - - Note: the server is not required to use the library. - -endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..6d5a80cbf9 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ -Dtests=disabled \ -Dtools=disabled -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) - -USBREDIR_LICENSE += , GPL-2.0+ (program) -USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER - $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:28:57 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:28:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: bump to version 1.1.2 Message-ID: <20221022202857.128289-1-fontaine.fabrice@gmail.com> https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md Signed-off-by: Fabrice Fontaine --- package/usbguard/usbguard.hash | 4 ++-- package/usbguard/usbguard.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/usbguard/usbguard.hash b/package/usbguard/usbguard.hash index a69240b3f9..6c10dc9d3e 100644 --- a/package/usbguard/usbguard.hash +++ b/package/usbguard/usbguard.hash @@ -1,5 +1,5 @@ -# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.1/usbguard-1.1.1.tar.gz.sum -sha256 460ebfb4ffc5609739a202a3a1d9fda1c30de033b634845b8baa136352bfb432 usbguard-1.1.1.tar.gz +# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.2/usbguard-1.1.2.tar.gz.sum +sha256 dcf5c90f3f93030e04df1baeb8d388b678c40dd48b135ea12a7be7dee8944934 usbguard-1.1.2.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index 614b7d655d..ca539a55f5 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBGUARD_VERSION = 1.1.1 +USBGUARD_VERSION = 1.1.2 USBGUARD_SITE = https://github.com/USBGuard/usbguard/releases/download/usbguard-$(USBGUARD_VERSION) USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:30:52 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:30:52 +0200 Subject: [Buildroot] [PATCH 1/1] package/uftp: bump to version 5.0.1 Message-ID: <20221022203052.129715-1-fontaine.fabrice@gmail.com> Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine --- package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..774981d162 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:33:35 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:33:35 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/uftp: bump to version 5.0.1 Message-ID: <20221022203335.131939-1-fontaine.fabrice@gmail.com> Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2: - Update tarball hash package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..e47cba9394 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 f0435fbc8e9ffa125e05600cb6c7fc933d7d587f5bae41b257267be4f2ce0e61 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:41:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:41:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/valijson: bump to version 0.7 Message-ID: <20221022204144.137169-1-fontaine.fabrice@gmail.com> https://github.com/tristanpenman/valijson/releases/tag/v0.7 Signed-off-by: Fabrice Fontaine --- package/valijson/valijson.hash | 2 +- package/valijson/valijson.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/valijson/valijson.hash b/package/valijson/valijson.hash index 0aab93dd2a..aacdf7dedc 100644 --- a/package/valijson/valijson.hash +++ b/package/valijson/valijson.hash @@ -1,3 +1,3 @@ # Locally Computed: -sha256 e06bf78fc1d26d4956fabc182408ebbbc47e3a6699778cda4aa439c2a6110b09 valijson-0.6.tar.gz +sha256 bc24736709acfb252a5fdcb5145f1f2670c7aecaba3356f6f8ba54903800fa5c valijson-0.7.tar.gz sha256 1a0f99926a2dbec30eba3db820236d9953fbe3048976923ac24980e655fbe991 LICENSE diff --git a/package/valijson/valijson.mk b/package/valijson/valijson.mk index 4b1f722f77..51a9353960 100644 --- a/package/valijson/valijson.mk +++ b/package/valijson/valijson.mk @@ -4,7 +4,7 @@ # ################################################################################ -VALIJSON_VERSION = 0.6 +VALIJSON_VERSION = 0.7 VALIJSON_SITE = $(call github,tristanpenman,valijson,v$(VALIJSON_VERSION)) VALIJSON_LICENSE = BSD-2-Clause VALIJSON_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:46:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:46:31 +0200 Subject: [Buildroot] [PATCH 1/1] package/vnstat: bump to version 2.10 Message-ID: <20221022204631.147518-1-fontaine.fabrice@gmail.com> https://github.com/vergoh/vnstat/blob/v2.10/CHANGES Signed-off-by: Fabrice Fontaine --- package/vnstat/vnstat.hash | 2 +- package/vnstat/vnstat.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/vnstat/vnstat.hash b/package/vnstat/vnstat.hash index 191dc4ec0b..bad4325d90 100644 --- a/package/vnstat/vnstat.hash +++ b/package/vnstat/vnstat.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 03f858a7abf6bd85bb8cd595f3541fc3bd31f8f400ec092ef3034825ccb77c25 vnstat-2.8.tar.gz +sha256 a9c61744e5cd8c366e2db4d282badc74021ddb614bd65b41240937997e457d25 vnstat-2.10.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/vnstat/vnstat.mk b/package/vnstat/vnstat.mk index 91f0233f56..3b2951b8c9 100644 --- a/package/vnstat/vnstat.mk +++ b/package/vnstat/vnstat.mk @@ -4,7 +4,7 @@ # ################################################################################ -VNSTAT_VERSION = 2.8 +VNSTAT_VERSION = 2.10 VNSTAT_SITE = http://humdi.net/vnstat VNSTAT_LICENSE = GPL-2.0 VNSTAT_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:53:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:53:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/whois: bump to version 5.5.14 Message-ID: <20221022205311.152019-1-fontaine.fabrice@gmail.com> Signed-off-by: Fabrice Fontaine --- package/whois/whois.hash | 4 ++-- package/whois/whois.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/whois/whois.hash b/package/whois/whois.hash index 3b5bbee23d..fb140fa198 100644 --- a/package/whois/whois.hash +++ b/package/whois/whois.hash @@ -1,5 +1,5 @@ -# From http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois/whois_5.5.13.dsc -sha256 62e613f116d5635aea6684238db00b030a6602ffc79462e4a0a8e62cb184b5d7 whois_5.5.13.tar.xz +# From http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois/whois_5.5.14.dsc +sha256 bf9c2cb307d5419b34ad401eecf2820b8f69660db41cf0762e5da71fa2df68e8 whois_5.5.14.tar.xz # Hash for license file: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/whois/whois.mk b/package/whois/whois.mk index 42a9e83954..5a85bea358 100644 --- a/package/whois/whois.mk +++ b/package/whois/whois.mk @@ -4,8 +4,8 @@ # ################################################################################ -WHOIS_VERSION = 5.5.13 -WHOIS_SITE = http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois +WHOIS_VERSION = 5.5.14 +WHOIS_SITE = http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz WHOIS_DEPENDENCIES = \ host-pkgconf \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 20:59:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 22:59:34 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinyssh: bump to version 20220801 Message-ID: <20221022205934.156714-1-fontaine.fabrice@gmail.com> https://github.com/janmojzis/tinyssh/releases/tag/20220101 https://github.com/janmojzis/tinyssh/releases/tag/20220222 https://github.com/janmojzis/tinyssh/releases/tag/20220305 https://github.com/janmojzis/tinyssh/releases/tag/20220311 https://github.com/janmojzis/tinyssh/releases/tag/20220801 Signed-off-by: Fabrice Fontaine --- package/tinyssh/tinyssh.hash | 2 +- package/tinyssh/tinyssh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tinyssh/tinyssh.hash b/package/tinyssh/tinyssh.hash index 30b5d13419..462ffb9002 100644 --- a/package/tinyssh/tinyssh.hash +++ b/package/tinyssh/tinyssh.hash @@ -1,3 +1,3 @@ # locally computed -sha256 2a051437878998c7782d9d38ef13e5e7a76435ae6b9c3e9ec492c3a567bd6314 tinyssh-20210601.tar.gz +sha256 234656fc8d369608eb5d0f3a26280e0e38e2e6b134cfc610b6e24bce176acd4f tinyssh-20220801.tar.gz sha256 b5dc19477e29f4111e1c16cd89ec0782f5a07b1a30e3bdb7c155425b81b12c46 LICENCE diff --git a/package/tinyssh/tinyssh.mk b/package/tinyssh/tinyssh.mk index 05716bcfe1..1472f7ead1 100644 --- a/package/tinyssh/tinyssh.mk +++ b/package/tinyssh/tinyssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -TINYSSH_VERSION = 20210601 +TINYSSH_VERSION = 20220801 TINYSSH_SITE = $(call github,janmojzis,tinyssh,$(TINYSSH_VERSION)) TINYSSH_LICENSE = Public Domain, CC0-1.0 TINYSSH_LICENSE_FILES = LICENCE -- 2.35.1 From ps.report at gmx.net Sat Oct 22 21:15:22 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Sat, 22 Oct 2022 23:15:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022201052.28903-1-fontaine.fabrice@gmail.com> References: <20221022201052.28903-1-fontaine.fabrice@gmail.com> Message-ID: <20221022231522.1d63bec4@gmx.net> Hello Fabrice, On Sat, 22 Oct 2022 22:10:52 +0200, Fabrice Fontaine wrote: > usbredirserver was dropped by > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Time to enable tools/usbredirect as it seems to be the replacement for usbredirserver (according to [1])? Regards, Peter [1] https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/2 > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > Signed-off-by: Fabrice Fontaine > --- > Config.in.legacy | 7 +++++++ > package/usbredir/Config.in | 12 ------------ > package/usbredir/usbredir.hash | 4 ++-- > package/usbredir/usbredir.mk | 16 +--------------- > 4 files changed, 10 insertions(+), 29 deletions(-) > > diff --git a/Config.in.legacy b/Config.in.legacy > index 0e63d59a98..39b00547c8 100644 > --- a/Config.in.legacy > +++ b/Config.in.legacy > @@ -146,6 +146,13 @@ endif > > comment "Legacy options removed in 2022.11" > > +config BR2_PACKAGE_USBREDIR_SERVER > + bool "usbredirserver removed" > + select BR2_LEGACY > + help > + usbredirserver has been dropped by upstream since version > + 0.13.0 > + > config BR2_KERNEL_HEADERS_5_17 > bool "kernel headers version 5.17.x are no longer supported" > select BR2_LEGACY > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > index 8ce180a884..2190cb88ac 100644 > --- a/package/usbredir/Config.in > +++ b/package/usbredir/Config.in > @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR > 'y' below if you want the server too. > > http://www.spice-space.org/page/UsbRedir > - > -if BR2_PACKAGE_USBREDIR > - > -config BR2_PACKAGE_USBREDIR_SERVER > - bool "usbredirserver on target" > - help > - If you want to serve usbredir requests on your target, say > - 'y' here to have the usbredir server on the target. > - > - Note: the server is not required to use the library. > - > -endif > diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash > index f738c36690..577e08efba 100644 > --- a/package/usbredir/usbredir.hash > +++ b/package/usbredir/usbredir.hash > @@ -1,5 +1,5 @@ > -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz > +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz > > # Hash for license files > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > index 6792a3e758..6d5a80cbf9 100644 > --- a/package/usbredir/usbredir.mk > +++ b/package/usbredir/usbredir.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -USBREDIR_VERSION = 0.12.0 > +USBREDIR_VERSION = 0.13.0 > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > USBREDIR_SITE = http://spice-space.org/download/usbredir > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ > -Dtests=disabled \ > -Dtools=disabled > > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > - > -USBREDIR_LICENSE += , GPL-2.0+ (program) > -USBREDIR_LICENSE_FILES += COPYING > - > -else # BR2_PACKAGE_USBREDIR_SERVER != y > - > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > -endef > -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - > -endif # BR2_PACKAGE_USBREDIR_SERVER > - > $(eval $(meson-package)) From fontaine.fabrice at gmail.com Sat Oct 22 21:18:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:18:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/stress: bump to version 1.0.5 Message-ID: <20221022211858.166130-1-fontaine.fabrice@gmail.com> Switch to an active fork: "The original stress went unmaintained; the source of the last version, 1.0.4, was imported from Debian. After, patches from Debian and other changes were applied to create the 1.0.5 release. The details of each release are registered in the ChangeLog file. Now, stress is maintained by volunteers under Resurrecting Open Source Projects." https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog Signed-off-by: Fabrice Fontaine --- package/stress/Config.in | 2 +- package/stress/stress.hash | 3 +-- package/stress/stress.mk | 6 ++++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/package/stress/Config.in b/package/stress/Config.in index b22c3f19bb..32a3e264bc 100644 --- a/package/stress/Config.in +++ b/package/stress/Config.in @@ -6,4 +6,4 @@ config BR2_PACKAGE_STRESS It imposes a configurable amount of CPU, memory, I/O, and disk stress on the system. - http://people.seas.harvard.edu/~apw/stress/ + https://github.com/resurrecting-open-source-projects/stress/ diff --git a/package/stress/stress.hash b/package/stress/stress.hash index 8d14d053fb..dc1785b6c7 100644 --- a/package/stress/stress.hash +++ b/package/stress/stress.hash @@ -1,4 +1,3 @@ -# Locally calculated after checking pgp signature -sha256 057e4fc2a7706411e1014bf172e4f94b63a12f18412378fca8684ca92408825b stress-1.0.4.tar.gz # Locally computed +sha256 1798e49ca365d928fb194ba1b8e8d1e09963b49e9edb0a78bcbba15750bb5027 stress-1.0.5.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/stress/stress.mk b/package/stress/stress.mk index 4d2d4cb838..99a50f349e 100644 --- a/package/stress/stress.mk +++ b/package/stress/stress.mk @@ -4,10 +4,12 @@ # ################################################################################ -STRESS_VERSION = 1.0.4 -STRESS_SITE = http://people.seas.harvard.edu/~apw/stress +STRESS_VERSION = 1.0.5 +STRESS_SITE = $(call github,resurrecting-open-source-projects,stress,$(STRESS_VERSION)) STRESS_LICENSE = GPL-2.0+ STRESS_LICENSE_FILES = COPYING +# From git +STRESS_AUTORECONF = YES # Stress is linked statically if the --enable-static is specified. # However, this option is always specified in the global -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 21:24:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:24:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022231522.1d63bec4@gmx.net> References: <20221022201052.28903-1-fontaine.fabrice@gmail.com> <20221022231522.1d63bec4@gmx.net> Message-ID: Hello Peter, Le sam. 22 oct. 2022 ? 23:15, Peter Seiderer a ?crit : > Hello Fabrice, > > On Sat, 22 Oct 2022 22:10:52 +0200, Fabrice Fontaine < > fontaine.fabrice at gmail.com> wrote: > > > usbredirserver was dropped by > > > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 > > Time to enable tools/usbredirect as it seems to be the replacement for > usbredirserver > (according to [1])? > Indeed, I'll send a v2. > > Regards, > Peter > > [1] https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/2 > > > > > > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > > > Signed-off-by: Fabrice Fontaine > > --- > > Config.in.legacy | 7 +++++++ > > package/usbredir/Config.in | 12 ------------ > > package/usbredir/usbredir.hash | 4 ++-- > > package/usbredir/usbredir.mk | 16 +--------------- > > 4 files changed, 10 insertions(+), 29 deletions(-) > > > > diff --git a/Config.in.legacy b/Config.in.legacy > > index 0e63d59a98..39b00547c8 100644 > > --- a/Config.in.legacy > > +++ b/Config.in.legacy > > @@ -146,6 +146,13 @@ endif > > > > comment "Legacy options removed in 2022.11" > > > > +config BR2_PACKAGE_USBREDIR_SERVER > > + bool "usbredirserver removed" > > + select BR2_LEGACY > > + help > > + usbredirserver has been dropped by upstream since version > > + 0.13.0 > > + > > config BR2_KERNEL_HEADERS_5_17 > > bool "kernel headers version 5.17.x are no longer supported" > > select BR2_LEGACY > > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > > index 8ce180a884..2190cb88ac 100644 > > --- a/package/usbredir/Config.in > > +++ b/package/usbredir/Config.in > > @@ -18,15 +18,3 @@ config BR2_PACKAGE_USBREDIR > > 'y' below if you want the server too. > > > > http://www.spice-space.org/page/UsbRedir > > - > > -if BR2_PACKAGE_USBREDIR > > - > > -config BR2_PACKAGE_USBREDIR_SERVER > > - bool "usbredirserver on target" > > - help > > - If you want to serve usbredir requests on your target, say > > - 'y' here to have the usbredir server on the target. > > - > > - Note: the server is not required to use the library. > > - > > -endif > > diff --git a/package/usbredir/usbredir.hash > b/package/usbredir/usbredir.hash > > index f738c36690..577e08efba 100644 > > --- a/package/usbredir/usbredir.hash > > +++ b/package/usbredir/usbredir.hash > > @@ -1,5 +1,5 @@ > > -# > https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > > -sha256 > fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d > usbredir-0.12.0.tar.xz > > +# > https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > > +sha256 > 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e > usbredir-0.13.0.tar.xz > > > > # Hash for license files > > sha256 > 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > > index 6792a3e758..6d5a80cbf9 100644 > > --- a/package/usbredir/usbredir.mk > > +++ b/package/usbredir/usbredir.mk > > @@ -4,7 +4,7 @@ > > # > > > ################################################################################ > > > > -USBREDIR_VERSION = 0.12.0 > > +USBREDIR_VERSION = 0.13.0 > > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > > USBREDIR_SITE = http://spice-space.org/download/usbredir > > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > > @@ -17,18 +17,4 @@ USBREDIR_CONF_OPTS = \ > > -Dtests=disabled \ > > -Dtools=disabled > > > > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > > - > > -USBREDIR_LICENSE += , GPL-2.0+ (program) > > -USBREDIR_LICENSE_FILES += COPYING > > - > > -else # BR2_PACKAGE_USBREDIR_SERVER != y > > - > > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > > -endef > > -USBREDIR_POST_INSTALL_TARGET_HOOKS += > USBREDIR_POST_INSTALL_TARGET_RM_SERVER > > - > > -endif # BR2_PACKAGE_USBREDIR_SERVER > > - > > $(eval $(meson-package)) > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 22 21:44:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 22 Oct 2022 23:44:39 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221022214439.174830-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Add an option to enable tools (and usbredirect binary) as a replacement to usbredirserver https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2 (after review of Peter Seiderer): - Add an option to enable tools Config.in.legacy | 9 +++++++++ package/usbredir/Config.in | 11 ++++++----- package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 21 +++++++-------------- 4 files changed, 24 insertions(+), 21 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..efe35fde36 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,15 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + select BR2_PACKAGE_USBREDIR_TOOLS + help + usbredirserver has been dropped by upstream since version + 0.13.0. usbredir tools (which include usbredirect binary) has + been selected instead. + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..d546ac1025 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -15,18 +15,19 @@ config BR2_PACKAGE_USBREDIR protocol. Note: only the library is installed, not the utilities. Say - 'y' below if you want the server too. + 'y' below if you want the tools too. http://www.spice-space.org/page/UsbRedir if BR2_PACKAGE_USBREDIR -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" +config BR2_PACKAGE_USBREDIR_TOOLS + bool "Enable tools" help If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. + 'y' here to have the tools built and installed on the target + (including usbredirect binary). - Note: the server is not required to use the library. + Note: the tools are not required to use the library. endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..172f0d52a0 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -14,21 +14,14 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb USBREDIR_CONF_OPTS = \ -Dgit_werror=disabled \ -Dstack_protector=disabled \ - -Dtests=disabled \ - -Dtools=disabled - -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) + -Dtests=disabled +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) USBREDIR_LICENSE += , GPL-2.0+ (program) USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER +USBREDIR_CONF_OPTS += -Dtools=enabled +else +USBREDIR_CONF_OPTS += -Dtools=disabled +endif $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 22:08:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 00:08:07 +0200 Subject: [Buildroot] [PATCH 1/2] package/lv2: bump to version 1.18.10 Message-ID: <20221022220808.191363-1-fontaine.fabrice@gmail.com> - Update hash of COPYING (standard ISC text used since https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) - meson must be used since https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab https://github.com/lv2/lv2/blob/v1.18.10/NEWS Signed-off-by: Fabrice Fontaine --- package/lv2/lv2.hash | 6 +++--- package/lv2/lv2.mk | 13 ++++++------- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/package/lv2/lv2.hash b/package/lv2/lv2.hash index ed21620bee..0814958887 100644 --- a/package/lv2/lv2.hash +++ b/package/lv2/lv2.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://lv2plug.in/spec/lv2-1.18.2.tar.bz2.asc -sha256 4e891fbc744c05855beb5dfa82e822b14917dd66e98f82b8230dbd1c7ab2e05e lv2-1.18.2.tar.bz2 -sha256 0b0b07d852e3ce7fa04986e141f73001bd7f260683968f0a19e02dbcc4131aa6 COPYING +# https://lv2plug.in/spec/lv2-1.18.10.tar.xz.sig +sha256 78c51bcf21b54e58bb6329accbb4dae03b2ed79b520f9a01e734bd9de530953f lv2-1.18.10.tar.xz +sha256 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841 COPYING diff --git a/package/lv2/lv2.mk b/package/lv2/lv2.mk index 13ffaa34b0..2dde9b907c 100644 --- a/package/lv2/lv2.mk +++ b/package/lv2/lv2.mk @@ -4,18 +4,17 @@ # ################################################################################ -LV2_VERSION = 1.18.2 +LV2_VERSION = 1.18.10 LV2_SITE = https://lv2plug.in/spec -LV2_SOURCE = lv2-$(LV2_VERSION).tar.bz2 +LV2_SOURCE = lv2-$(LV2_VERSION).tar.xz LV2_LICENSE = ISC LV2_LICENSE_FILES = COPYING LV2_DEPENDENCIES = host-pkgconf LV2_INSTALL_STAGING = YES LV2_CONF_OPTS += \ - --no-coverage \ - --no-check-links \ - --copy-headers + -Ddocs=disabled \ + -Dtests=disabled ifeq ($(BR2_PACKAGE_CAIRO),y) LV2_DEPENDENCIES += cairo @@ -30,7 +29,7 @@ LV2_DEPENDENCIES += libgtk2 endif ifeq ($(BR2_STATIC_LIBS),y) -LV2_CONF_OPTS += --no-plugins +LV2_CONF_OPTS += -Dplugins=disabled endif -$(eval $(waf-package)) +$(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 22 22:08:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 00:08:08 +0200 Subject: [Buildroot] [PATCH 2/2] package/sratom: bump to version 0.6.14 In-Reply-To: <20221022220808.191363-1-fontaine.fabrice@gmail.com> References: <20221022220808.191363-1-fontaine.fabrice@gmail.com> Message-ID: <20221022220808.191363-2-fontaine.fabrice@gmail.com> - Update hash of COPYING (standard ISC licence used since https://github.com/lv2/sratom/commit/145ed2fe9756f707d9fd5f03ada5327d04e1b972) - meson must be used since https://github.com/lv2/sratom/commit/75e647def0f67647ec7ba1405e26d809a87c62fc https://github.com/lv2/sratom/blob/v0.6.14/NEWS Signed-off-by: Fabrice Fontaine --- package/sratom/sratom.hash | 6 +++--- package/sratom/sratom.mk | 12 ++++-------- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/package/sratom/sratom.hash b/package/sratom/sratom.hash index 64d460b2ea..3b8fa65300 100644 --- a/package/sratom/sratom.hash +++ b/package/sratom/sratom.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://download.drobilla.net/sratom-0.6.8.tar.bz2.asc -sha256 3acb32b1adc5a2b7facdade2e0818bcd6c71f23f84a1ebc17815bb7a0d2d02df sratom-0.6.8.tar.bz2 -sha256 3fc429d6b944fa20306357196a28bb4dd7c25e2d67edebec771f44de5bd7f9e8 COPYING +# https://download.drobilla.net/sratom-0.6.14.tar.xz.sig +sha256 9982faf40db83aedd9b3850e499fecd6852b8b4ba6dede514013655cffaca1e6 sratom-0.6.14.tar.xz +sha256 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597 COPYING diff --git a/package/sratom/sratom.mk b/package/sratom/sratom.mk index e1e0f4e033..25e7a091b3 100644 --- a/package/sratom/sratom.mk +++ b/package/sratom/sratom.mk @@ -4,18 +4,14 @@ # ################################################################################ -SRATOM_VERSION = 0.6.8 +SRATOM_VERSION = 0.6.14 SRATOM_SITE = https://download.drobilla.net -SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.bz2 +SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.xz SRATOM_LICENSE = ISC SRATOM_LICENSE_FILES = COPYING SRATOM_DEPENDENCIES = host-pkgconf lv2 serd sord SRATOM_INSTALL_STAGING = YES -SRATOM_CONF_OPTS += --no-coverage +SRATOM_CONF_OPTS += -Ddocs=disabled -Dtests=disabled -ifeq ($(BR2_STATIC_LIBS),y) -SRATOM_CONF_OPTS += --static --no-shared -endif - -$(eval $(waf-package)) +$(eval $(meson-package)) -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 23 05:34:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 23 Oct 2022 05:34:52 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-22 Message-ID: <20221023053459.0254A60BB9@smtp3.osuosl.org> Hello, Autobuild statistics for 2022-10-22 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 3 | 3 | 0 | 6 | 2022.08.x | 7 | 16 | 0 | 23 | master | 115 | 227 | 7 | 349 | Classification of failures by reason for master ----------------------------------------------- crun-1.5 | 13 libnss-3.84 | 11 host-sentry-cli-1.59.0 | 10 host-f2fs-tools-1.15.0 | 9 systemd-250.4 | 9 sysvinit-2.99 | 9 brltty | 7 igd2-for-linux-2.1 | 7 btrfs-progs-5.16.2 | 6 gerbera-1.10.0 | 6 glibc-2.36-44-g2628500f5dff... | 6 dahdi-linux-5c840cf43838e06... | 5 host-binutils-2.38 | 5 host-go-1.19.1 | 5 host-pahole-73383b3a39afe86... | 4 host-rust-1.64.0 | 4 linux-6.0.1 | 4 perl-5.34.1 | 4 unknown | 4 autofs-5.1.8 | 3 batman-adv-2021.4 | 3 efivar-38 | 3 gensio-2.5.5 | 3 libgpg-error-1.45 | 3 lxc-4.0.12 | 3 procps-ng-3.3.17 | 3 wolfssl-5.5.1 | 3 xz-5.2.7 | 3 botan-2.19.2 | 2 casync-4ad9bcb94bc83ff36cfc... | 2 fs/cpio/cpio.mk:117: /tmp/i... | 2 fs/cpio/cpio.mk:117: /tmp/i... | 2 host-binutils-2.37 | 2 libarchive-3.6.1 | 2 libglib2-2.72.3 | 2 linux-5.10.145-cip17-rt7 | 2 ntp-4.2.8p15 | 2 sdl-1.2.15 | 2 volk-2.5.2 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 alsa-lib-1.2.7.2 | 1 boost-1.80.0 | 1 bullet-3.21 | 1 check-0.15.2 | 1 collectd-5.12.0 | 1 containerd-1.6.8 | 1 dash-0.5.11.5 | 1 dawgdic-16ac537ba9883ff01b6... | 1 dieharder-3.31.1 | 1 elfutils-0.186 | 1 erlang-22.3.4.22 | 1 fdk-aac-2.0.2 | 1 file-5.41 | 1 flannel-0.14.0 | 1 freeradius-client-1.1.7 | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gnu-efi-3.0.15 | 1 gobject-introspection-1.72.0 | 1 host-gcc-final-11.3.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 libcap-ng-0.8.3 | 1 libcpprestsdk-2.10.18 | 1 libcurl-7.84.0 | 1 libdcadec-0.2.0 | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libmdbx-0.11.12 | 1 libsigc-3.2.0 | 1 libvorbis-1.3.7 | 1 lttng-babeltrace-1.5.7 | 1 lttng-tools-2.13.2 | 1 luvi-2.13.0 | 1 makedumpfile-1.7.0 | 1 mariadb-10.3.36 | 1 matio-1.5.22 | 1 mender-3.4.0 | 1 ne10-1.2.1 | 1 nodejs-16.17.1 | 1 ntpsec-1_2_1 | 1 ocf-linux-20171122 | 1 openal-1.22.0 | 1 php-8.1.11 | 1 pixz-1.0.7 | 1 poppler-21.12.0 | 1 pv-1.6.20 | 1 rtl8821au-4235b0ec7d7220a63... | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 valgrind-3.19.0 | 1 vlc-3.0.17.4 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/97b8a22267c5f5937e9b70beff19ddb3d19b672d | riscv32 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/d0455bd72accea4bb1ec36b96008ed5c7965631f | mips64el | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/a03c7c4cf7b92c5a836be9c6e1e9c99bd7951657 | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/6f42eeabc6c78a6ff5e02466f0c105512b19354c | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/212049ce3068eec03c1552e0475df91769b07a2e | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/710fb00e0067a03a9406a9fbab0ab0c10c7b8cce | microblaze | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/d0a7fa247b1b5d8d615143808b06b97af5ec88aa | or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/945ef6fe73e29d12412d7c7536d3d77f60f9883f | sparc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/538e1f2ffff989105ef404994e13cc71b0a1e81a | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/6d05efc42e9be3afecc20325b4858055a732fde6 | mipsel | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/cdc7ff2a17f2e9b0daaf2081c46746d8b5110c64 | ORPH mips | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/e02648e66e5ef1a82e781997d60bc24bc0b069e5 | ORPH powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/e50235040f5b62a79588229a64c0d789411f0c8b | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d001edfc3f70d1efd506bba91c304b3f77a5dd62 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/2e9850c766ec06d26607e9bf30b8abd5f7523160 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/ee325a61a0dd0b6564a219093c0c4f1f7345ec38 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/81ee6368e90e86f16d2c2db34a82ea60566c5e72 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/2d06828b3df51b4e18d7a422174f4ffd4c8f0c0c | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/4a52b2eaf2354feee49604b42d9440c67757e20e | sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5db6f81c741a1fb8a1b2f8651beeea28aded17a0 | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e49c8795cb956f32705fbc6535b4d4c107621104 | ORPH aarch64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ea16778b993f85450d8cf06da249d7930bb831e | ORPH i686 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5c7ea6f7d1790a7140b59ef75c20a6c5a66687b9 | ORPH riscv32 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/89dacc23bf62f569b24fbc95b0104bb5039d205a | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/ad27ea177ac34a95916671eede6227aba5137efd | ORPH powerpc64 | bullet-3.21 | NOK | http://autobuild.buildroot.net/results/b3a6fbb6be6ccdbb2e3847608c7317f581be1069 | sparc64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/bb2f0a10eeffc99900bfbaaa6cedd8eccea57b62 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/f96b8e3472c40da3ef09b064372370f6fa91b92e | sh4aeb | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/18bba18baac8621e1d1463b13755aa3fe21b2257 | ORPH or1k | collectd-5.12.0 | NOK | http://autobuild.buildroot.net/results/fbfa60672ff03fed148956d52a985aa4b12c9454 | x86_64 | containerd-1.6.8 | NOK | http://autobuild.buildroot.net/results/a76c7280798855f638336524bd5bc392659b4ba7 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/85d93ed6fcc3dfabded76c8d3740a058d4350d2b | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6ef0e324ac7afda61fc43ac355841c210c4f41a7 | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4bbc5ab949fd4a69b90086e07c1029d4c82cda07 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4cc41728b3d640d6f122984708622d6dcf790fbd | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2a6eb0bbe94332ec8d1b91fb68c3928057b3c308 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f661f320fbf812503747257b88fa051410087abf | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/70604ba9bc2dc5905860cfa8b63a4538051ca44d | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c5fd5b2f7198d041d4baf1957fda19988e864f92 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/69fa7b34c1f2e2f5fea3c93c1703c8331b4c67fa | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c0babc4832984b554ae98037cd19bbd49122f0d0 | sparc64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7331d71e2a23b1dad10e4cf2966608383dc39b9d | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/dbe0ac17f2186f47b854e90c92eb13f1131c2bb5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5188fbbdab2a14de3b8e11e43c7a2e8ebaad85b7 | mipsel | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c3508cdf7df2845d4bad866b7d1c06c8dd855d0c | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f92e16818e1d01f0479df8a96962a357f3ef9425 | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/8f4c913a3ab059c541d7976a211cf86cb4601c23 | sparc64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/5eb06f2930c5350a8c17605a16c8a57efee50c24 | powerpc64le | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ab5a35c211a91b23cbd56df110c52227a84b5987 | microblaze | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8e7db6d74424845ba9d41b95b1d6c1952ce062a6 | ORPH riscv64 | dawgdic-16ac537ba9883ff01b6... | NOK | http://autobuild.buildroot.net/results/1ee035de3d3218f521c2fe11bf797317e87fb738 | microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/28ec2bf5be1623bdc7805a6e35e4f7062671f34f | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/d428b124ec2701802ac2f56ab35d9cfd12e16d2d | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/dfd02f6a97777872d10dfe7cb983b9e1f9edd8d2 | aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/4fa13dd076001eddd163436642d1ff487c91d4a8 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/8b25874278e4d7073085d6a41a95a02301603741 | ORPH sparc64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/c6d9a89e5f550310c672a621ca8e8d63575dda87 | mips | fdk-aac-2.0.2 | NOK | http://autobuild.buildroot.net/results/1ca8e68b27bc58dca94b7a7af02a306497be7a02 | mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/461b1b46310e2df7e2d153e8116ead4793f68088 | ORPH aarch64 | flannel-0.14.0 | NOK | http://autobuild.buildroot.net/results/f3e40ca88f7c314822e26dce95e3ce8b68a624e5 | riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/0bc09dc6406fa152955ba7f8d62218e758b4d2ad | mips | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/18f707a01908a77d9e4c6edf581e8768be466c19 | riscv32 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/5a61d06fb52ed6225e9d62c6a20e573fc374fb3f | powerpc64 | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/2ce976eb4ad7bc1ef1c34d66617ef4d99583c48c | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/0405d9b4c423e83c4d053e9650e897b2eaddcf35 | mipsel | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/7dfc85f8bd9cfc9a3617b5b2956c5861e05dc40e | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/4065137cc3c7226ad2b255c661ef15ff4f458396 | sparc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/2cef12f539d923c66eb861dd4d642800efd025be | powerpc64le | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/bef57d887c148841a437e2c07db4bc8f40ea6248 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/dbf46cefcf8cb2d9aed032044b716b0d276a0347 | aarch64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/085a0788854305d6c5124012b95ea6eedcb00686 | sh4eb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/28b4ac92ee13fdf2c96f6b3fd093fc72286f83db | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fc0b43dc5da16e0ae9bfd8189fe28e8ed5466f6d | i686 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/84b92eedd79d07e70b4b54248d2e6a775a57c308 | or1k | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/88b00fa24365eeabdfe4e15e1a705c082aff134d | sh4 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/c1beb326b8e26343e6a7949bc3e61faaa4d3a854 | xtensa | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/cbcfe1ac85b2a761489c8b2d4cf434a5b6fc96b8 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/b9ec03ccdf32f150e68914dfa0ffbbb06b33a795 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/076e25d8e5e8bd902511b1bc0c492fb6c9405696 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f8148a7cbcc61d6bbf5d35cd713444222d1c9fe5 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/546b8bf086fefc0b195817cadd725769e5237ce7 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2156387319e067925518c0d4155466d03a1be55b | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7d23e0fca8c0bb8dcd4c5e6da2b18e8943fa73df | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4be90eb9e22a92f14ecc56cf3cbc084fbe68767d | mips64el | gnu-efi-3.0.15 | NOK | http://autobuild.buildroot.net/results/108130430ba379d0c791a7637b07439859e528a1 | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/111ea2e51b060a816343d663b8bc0ac52f0c4efa | ORPH arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/f3da7d48240b46592c1e833b46b95ca5bd29072b | m68k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/0ff0183f99f3cb0077254611e8fe8c9dcdcc4239 | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/db0c1a961721b08b933e451fbd1e815f2a6ecc79 | sh4 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9987bb20ef729f1961359fd814c5fe8cfa20e87f | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/82c19e57717fd592fc5b8ac28c5ea54c90142034 | xtensa | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/fc3003f4d041d991df62f982012af8e5d6806f8b | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d7071b7bb51f837058e2f270a70ef775fabf3567 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b4868b17c10ac7414b4f19223d1abc08345b4f11 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a9c365182b262a4c304499d8162c17b0e6246d4f | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/48a27896f7a6682fdc973b041b8f455fa0c9122d | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8ce8fb5950b50ca53a3e89baa4423d8131c534a2 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c0b38d2a099b52b90ea074ddf800f63dd6e57e8e | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7898672ee5e1e08c783716df8864ad27be47865c | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/7e6b02a11fde037a47eaf1483c0bb723bd210afa | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/63d55a79e9fa5887ab2cf21bae9442f669b2b980 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/abbd49f42afb6ff3d7ec8cc4493ec07e6e6a70a8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/77e5da7f47199d04aafb32b16321e1d07c57faae | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1ee0499a2f66b4a7ab32fd06d7bbbe751e57cba0 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/bbb3d3c27c4cc8c2df8e12b7674432977be75d00 | i586 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ff6a0da387e33ba384fe7b4e8d32cece2c7f64e4 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1468570ca5158d9d52ed6657b351564d448099bb | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/6b3a182b3ef26a9926c0b538fdb20431a9282a3a | nios2 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/0916fa0b6ff6710b1c2831847564bd41c039c9c8 | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/920ba99a550cd2a263dddb8247a5c3a045ac3608 | mips64el | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4d9caf8405ecd7b55233a6c49d9b5940b115330 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/84da2747f1eda7c6803eaccdef7ac2b28c32b1db | x86_64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/462b9427a1d2702d5e4a67bb5cc2d4355eaf92dc | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/72f067fd226d70a448f2542358fb27f7a2aad111 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ffc24194cc11985edeff1d9af8c546910c118343 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/150cb36e233739fecfce8c49bae3fe61e2b551e5 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/847205190d689fd10ff4813365ffadc24c2176d7 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d8a7d731607651db06846cee614fc35a8595a5f3 | mips64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8ace710890307da277c62185a588a698ab3719d7 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08ab9a4737faedc824fb4b11af4e98c8e109a9ca | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/bd1272cf5f1a7a43df6ba579c635f40d30548b2d | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/17cf8726e2bd785f133c05a567db42dbff33037e | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/55eadd1d3ff53f0618b623df70645942b1c899ad | xtensa | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8f6153271027aae6786ef9c1e1314777566e2def | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/110fa547341d074c5b218d25a5de47a1312d00f5 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ed36c83e9a3c281c7982078d6ec2b4693d27bf01 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d58719f648a6468ff55a8422e482d1df965abb1f | arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/092df43a8a280988e6608b7ac74b33b40f100dac | ORPH sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9cdb0761d3ef3d7d2301a2a0210a599cb2e13cf1 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c3c592fd6439fb099ad34c824c9e206a233cfa4f | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/961e26d839d0ec77ceb123e2c03103ffa34f634b | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4b8674d9c8f64dfe89aa64cbc9ae614eaff0e81e | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/00063882e86f5e16d8914750491760c2c8b53c7f | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/9d828251e5c7e7136da08be9f498f75b8255cca4 | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c3ee5a906e4c9ef2f808386f53565031d359845b | powerpc64le | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/0010268524cf25a4b38dff1cc6154872cd0c8482 | arc | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/23d50b241271c8a8fdd9671705064267ab0ca9ed | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/d73477b293a6b789b29cd3d1a7b43517b898cda0 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/b4ce34cc926f509cce2dbd5b8bd27679f188e93d | sh4eb | libcpprestsdk-2.10.18 | NOK | http://autobuild.buildroot.net/results/c1c262c1387a0088c919280c30767a7c6412fcc0 | ORPH riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/757da8be50d8d6fc29106b5831356d131fff5f4f | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/973d55b9070895d94e76ae4988cc137396c31725 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/dfceabb8b52649122759a85bce1031f304315e62 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2c9d1d8b7663ae9e9590646165af4885d3f42f63 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/5aae5fa14ba55ac096d9dbf1ae551afee75db2ab | x86_64 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/3381151b3efd2d2498a38d2579b017238bc5b744 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/23d5016df79d770a5414125d31bed20030f53153 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/c5fcf97392e30c2ab4ee180e80404ced531bf399 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/4b9f5cac4349067523dc973b767e2cc3c9809a2e | ORPH microblaze | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/35468575bf2865dbfdd648694ad62a20ab52d83a | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/90071f7f6ef2705589c62f77cf01ddb4d08b2e88 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/43c7a58b787e947c2ef7393b04401585aff093c4 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/46737758f7644eea3cbd061209f203399bc966fe | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2d2e70b307d1b80288f203fac03c3976032b3987 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/da6273feaeec84112a9c2d4ae0da6278ec92ff6d | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ba33fed7b78aae49fd9124282b4f626f6a830b7d | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/8ce4f88059132bca1129b2aa0cc0ac0bad37ea67 | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f1e311f60c1ed03397b5d3bfb8d98f50e90c760c | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e882ea33d1e7fcb61c1a15f9de331e4ba26f7a7e | powerpc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0b00c5d2a62038f7d728c6b9fe694241c1b7fd0b | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/11f0237bb3f31cd8804cb4a855b1665046671e1f | i686 | libsigc-3.2.0 | NOK | http://autobuild.buildroot.net/results/3342af733950b9e83c8e241b35ba8e575f338a3d | ORPH powerpc | libvorbis-1.3.7 | NOK | http://autobuild.buildroot.net/results/942532328dfe37ddba1f364230672510e9f7c28f | powerpc64le | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/539d82daae77e097bf914d33c93c899c6ad23515 | ORPH mipsel | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/032ecc729f64f74fe656e21523391507fc3834c5 | ORPH microblaze | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/483dd42f320933eb2a5202984d19a522f8c6343a | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/9239a88f12bf9ec240ca6f34c8e5243f87681be1 | ORPH sh4eb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/394c3b5a11cd6315ef5f58c11b88dce49ff296c8 | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b9da14feb9cb59e1f357b4a86d52f1ef51c26131 | ORPH arc | lttng-babeltrace-1.5.7 | NOK | http://autobuild.buildroot.net/results/aa717921f3b93ae9d0880497153546729d0e999c | powerpc | lttng-tools-2.13.2 | NOK | http://autobuild.buildroot.net/results/b80e41376f9ad40c1e6fc088980097298de633ea | aarch64_be | luvi-2.13.0 | NOK | http://autobuild.buildroot.net/results/4ee8bb7b8d69e1b102fe3ed89cc813585d5ea9c5 | ORPH or1k | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/56bf348b16e2de0c0f905ba506efc8d90e37a6a2 | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/805543ae55950de68b734004d6dddc36a6a7660f | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/155f0810c9cd8acbfc76a14976b962c1ed296646 | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/7de26c873b325b4b0b25e70ac7d42f5e9c914b5d | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/50750370b59d3fcde621688babf467d7e73c9900 | ORPH nios2 | matio-1.5.22 | NOK | http://autobuild.buildroot.net/results/21bd18ce879d8bcc75345b78ce13a29d2185d9c3 | s390x | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/c6e70bd975f56d225a1e7774923395d9c4bca6b1 | aarch64 | ne10-1.2.1 | NOK | http://autobuild.buildroot.net/results/a339b4a3927379b2e30d1e83f481b7cc8c5ce7d5 | mipsel | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/79a507e35e1f4eb0f563772171dfab4ca1c1878c | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/1c61d4b0fd6ebb4a92c30c8e2ea216dbe0353786 | ORPH riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/00a76566a0de7622bd8005d69d6f83d44c3e5301 | ORPH microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/42fd7fa4e1d0e2736f1cb9f1ada3cd33e99a802f | ORPH powerpc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/7406486c275c8766ed2a2bb0278fd0d290f4c8ff | ORPH mips | openal-1.22.0 | NOK | http://autobuild.buildroot.net/results/e8ae47ac732936d4411ff2e669fccbb9ac2b5a1a | i686 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/20a5a3e9149990b1088162b76bbee0e80a915c7b | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/192fef81677d37c9c05232bccd3a9d50baabe365 | aarch64_be | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/439d82e92fe4d5268c3f902a659eddcf0ddd106f | m68k | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/363db5621fe14acb4c23a77bcffd6c19f72c98ae | sh4 | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/97910f245c6d59f6b5f53471486b64fccd583292 | armeb | pixz-1.0.7 | NOK | http://autobuild.buildroot.net/results/080174fe65f5e109ba8b331cea972f19ccfe5e05 | xtensa | poppler-21.12.0 | NOK | http://autobuild.buildroot.net/results/d8dc2113bb676791f224cd36852318e31ca1c1f8 | nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/25a1a88b3e6b3000e995778d0a34b0836d3403eb | ORPH powerpc64le | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/8871c6a4acba52961d73abaea5aee1ae6896ed30 | ORPH s390x | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/615f896569fef6171b78a0882f75d63ef0332f3a | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/fa1c2a2f2345129a6cc53096baa259b59a04c57c | ORPH powerpc64 | rtl8821au-4235b0ec7d7220a63... | NOK | http://autobuild.buildroot.net/results/287f2fad8355577f03aea259b62cb0bcaee88219 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/3df1e7312f144be1092bbd132d58c01f3183d0a3 | ORPH sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/6d03a37f3f73b9174d80a2c545ba72ec07c762e6 | ORPH nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/30005ff176ddbac7280cbe0eadff394151a4f56f | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c0c5be5dc7b108dadbcda38b699837436a01d9e9 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/44c012032a7bb959520c3f23a668997c1a833a89 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/62ed0c2a3349bc14e89b851fe9d2f9f39593c443 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5477bd1d37f0bff7bb35a8d703a49ffea32324ef | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/836bdd1c81b8b2c4b9e317e3eb000f39a45f1bf3 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/268bf7906a29604b131f858ee6100912c0343332 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e5aa762ed3a412e88a20d8cb0bf2ae3c72d7bd5d | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d25a439bdd692844c2862c82055ac0c97e98917c | mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0b57597bebf43d98b3c5ee39a68ee7162c53ad7f | ORPH mipsel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5246d96fdfc7b83868ee78643b9912d3f695f9be | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4a0967124d2fd98669beb2cf3fc5560cca3a618 | ORPH riscv64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/62c8561d33394c26a0693e93f391625cdcc291f5 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cc62d6d858164f73e1952be8bff8ef5ca2c12d3e | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/630dd0d55369995102052284f934522a96bfb5bb | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a08164170a36a54a046df181f1680769695a42de | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/262f87c077c0cd5183d5e47c876a07cb9d813aaf | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/bc8fedcf14afadd5eaccf53e19b0f4220c53ca7e | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/a6996bb8eb6a732fcfcb6480a32766df42c56bd6 | arc | unknown | NOK | http://autobuild.buildroot.net/results/f9abb09630b4357bbace52cade30d10b99fb16e2 | arm | unknown | NOK | http://autobuild.buildroot.net/results/37f63fe3c40357b63222e1e12867434b7f94e4d1 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/42a43ccd387d4c49b97dff58969e28468d128704 | sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/812dbd853e5b6716c2ed5fb7dfa22b0e61e21de4 | mips | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/2d6537663dc9fd86db9db917728da0a0d646a916 | ORPH mipsel | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/35b8f43552d6fed770f1f0b2c54103b65d0edb9b | ORPH i586 | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/d8e923c973ad94d43de4d0370ff608e07272d587 | mips | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/3930efffb2686381f372a824f894530112410547 | powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/02353aaa647812041240cbf651a840ca65b4f908 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/9e48dcfd9a3c6d418901afbfb35a08cd5f33aee5 | mipsel | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/655fc4da4aa5538e98e1dc45c58074a7ddc65f5f | arm | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3a0cd1fdcf9b47ee6d66cfa39edc1bd0953e0d71 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c3748f575d7c9c972d95067cb21e2c931760a3a8 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/50c5f4582252ea2c40142fb14c7288f58680e807 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/2c6ad6acbf9382d7df8a8114f4d067cb12670d7e | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- igd2-for-linux-2.1 | 1 qt5webkit-5.212.0-alpha4 | 1 vlc-3.0.16 | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/d2a0585030277a51bee5cda39b5cee01b3323a49 | mipsel | qt5webkit-5.212.0-alpha4 | NOK | http://autobuild.buildroot.net/results/49c9f8e4d234ebb615f796e1ce50a76b82be399a | x86_64 | vlc-3.0.16 | NOK | http://autobuild.buildroot.net/results/3838dc3444188c44904528992a4b41ee8e2ace88 | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-spirv-llvm-translator-... | 3 openssh-legal-info | 2 unknown | 2 acpica-20200717 | 1 gnu-efi-3.0.14 | 1 host-rust-1.62.0 | 1 igd2-for-linux-2.1 | 1 igh-ethercat-1.5.2 | 1 libgcrypt-1.10.1 | 1 mongodb-4.2.18 | 1 perl-5.34.1 | 1 systemd-250.4 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | acpica-20200717 | NOK | http://autobuild.buildroot.net/results/92cb8ec6fbd9e485f88dfaefda531712310189a8 | mips64el | gnu-efi-3.0.14 | NOK | http://autobuild.buildroot.net/results/ecdb5299588ae1de2d6a184e6b7b6d3df9249db7 | i686 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/e5d45c8a2192e380805e8f64852bcf6a08bc6a99 | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/fe5e15282913d1898ed7795d2ac6c2b868b11852 | ORPH x86_64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/f4c01905adcc3c40b9c3fefa1b570246b251e94c | ORPH i686 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/b8633932159364822904ec10a189127e6f98a7e4 | ORPH aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/245b3bcd99d09f7b1eb0d60520922345220b73af | riscv32 | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/0f73a76df0aa6e39786527b7f854fd434f918b8b | i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/e459a4745d2128142f42e20817e388a01f941e67 | ORPH aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/3dfc010b35a0e0d06a18af1b1d4354c1d5fb0c0d | or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/ea03740ba6f639b64c71ae5899342f92afb34b39 | ORPH sparc | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/651ba52c5bc7ea5380147113de6e5c4e9407c911 | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ebf0e0fd9d7712e47515ee676d109b9bfd98aeb6 | arm | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/34235256236802d76b827baf26b679b07f3a4a25 | powerpc | unknown | NOK | http://autobuild.buildroot.net/results/cd91107c69194a5219abf0168d4a8d535877b08a | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/ca6dca94384cb2299fb12035b2a44b2ffcd7a62a | -- http://autobuild.buildroot.net From yairba at protonmail.com Sun Oct 23 07:04:28 2022 From: yairba at protonmail.com (Yair Ben-Avraham) Date: Sun, 23 Oct 2022 07:04:28 +0000 Subject: [Buildroot] [PATCH 1/1] package/casync: bump to latest git commit (0efa7abffe5f) Message-ID: Drop patches (merged to main) Signed-off-by: Yair Ben-Avraham --- ...castore-fix-build-without-lzma-or-xz.patch | 35 ------------ ...tall-udev-rules-without-udev-support.patch | 53 ------------------- package/casync/casync.hash | 2 +- package/casync/casync.mk | 2 +- 4 files changed, 2 insertions(+), 90 deletions(-) delete mode 100644 package/casync/0001-castore-fix-build-without-lzma-or-xz.patch delete mode 100644 package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch diff --git a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch b/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch deleted file mode 100644 index a528b1244c..0000000000 --- a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 06b667de02df34e3efa1864b4031853bd4ee010d Mon Sep 17 00:00:00 2001 -From: Yair Ben-Avraham -Date: Sun, 10 Jan 2021 06:34:58 +0100 -Subject: [PATCH] castore: fix build without lzma or xz - -castore.c unconditioanlly includes lzma.h, but lzma support if optional. -Furthermore, castore.c does not need anything from lzma.h. - -Drop the include altogether. - -Signed-off-by: Yair Ben-Avraham -[yann.morin.1998 at free.fr: - - lzma.h is not needed at all - - rewrite commit log accordingly -] -Signed-off-by: Yann E. MORIN ---- - src/castore.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/src/castore.c b/src/castore.c -index c290dfd..b2e5320 100644 ---- a/src/castore.c -+++ b/src/castore.c -@@ -2,7 +2,6 @@ - - #include - #include --#include - #include - #include - --- -2.25.1 - diff --git a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch b/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch deleted file mode 100644 index 838b065571..0000000000 --- a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e3f683dc3013d14bddb9f9ec5bdc31367dc51a1c Mon Sep 17 00:00:00 2001 -From: "Yann E. MORIN" -Date: Sun, 10 Jan 2021 10:44:39 +0100 -Subject: [PATCH] build: don't install udev rules without udev support - -Signed-off-by: Yann E. MORIN ---- - meson.build | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -diff --git a/meson.build b/meson.build -index aac7727..92be1ea 100644 ---- a/meson.build -+++ b/meson.build -@@ -151,6 +151,11 @@ conf.set10('HAVE_SELINUX', get_option('selinux')) - - if get_option('udev') - libudev = dependency('libudev') -+ udevrulesdir = get_option('udevrulesdir') -+ if udevrulesdir == '' -+ udev = dependency('udev', required : false) -+ udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') -+ endif - else - libudev = [] - endif -@@ -175,12 +180,6 @@ subdir('test') - - includes = include_directories('src') - --udevrulesdir = get_option('udevrulesdir') --if udevrulesdir == '' -- udev = dependency('udev', required : false) -- udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') --endif -- - subdir('shell-completion/bash') - subdir('doc') - -@@ -318,7 +317,9 @@ udev_rule = configure_file( - input : 'src/75-casync.rules.in', - configuration : substs) - --install_data(udev_rule, install_dir : udevrulesdir) -+if get_option('udev') -+ install_data(udev_rule, install_dir : udevrulesdir) -+endif - - ############################################################ - --- -2.25.1 - diff --git a/package/casync/casync.hash b/package/casync/casync.hash index dbb85520de..469beb5b6c 100644 --- a/package/casync/casync.hash +++ b/package/casync/casync.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 d07f43e70e3c466152033da4c55c065f815d3025234a046c2bce1cfe4ac7d273 casync-4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc.tar.gz +sha256 5d58def4c5ca902b35a97178d4619b9298a35b27d5748a2cc346bd36c2e38e9c casync-0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/casync/casync.mk b/package/casync/casync.mk index bb9bd8ccac..af010a7ece 100644 --- a/package/casync/casync.mk +++ b/package/casync/casync.mk @@ -4,7 +4,7 @@ # ################################################################################ -CASYNC_VERSION = 4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc +CASYNC_VERSION = 0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f CASYNC_SITE = $(call github,systemd,casync,$(CASYNC_VERSION)) CASYNC_LICENSE = LGPL-2.1+ CASYNC_LICENSE_FILES = LICENSE.LGPL2.1 -- 2.30.2 From fperrad at gmail.com Sun Oct 23 07:19:46 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 09:19:46 +0200 Subject: [Buildroot] [PATCH] package/lua-lyaml: bump to version 6.2.8 Message-ID: <20221023071946.433502-1-francois.perrad@gadz.org> diff LICENCE: -Copyright (C) 2013-2020 Gary V. Vaughan +Copyright (C) 2013-2022 Gary V. Vaughan Signed-off-by: Francois Perrad --- package/lua-lyaml/lua-lyaml.hash | 4 ++-- package/lua-lyaml/lua-lyaml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lua-lyaml/lua-lyaml.hash b/package/lua-lyaml/lua-lyaml.hash index af3d0ae6d..a8599bc3d 100644 --- a/package/lua-lyaml/lua-lyaml.hash +++ b/package/lua-lyaml/lua-lyaml.hash @@ -1,3 +1,3 @@ # locally computed -sha256 9bb489cefae48b150d66f6bab4141d8d5831fcb7465bfc52a9845fa01efc63b0 lua-lyaml-6.2.7.tar.gz -sha256 81e4ea1d897e259b31111adc2d3c185fe23e435942ff3e9de8c8c9c5d01247d0 LICENSE +sha256 c6169f516ff2a8da96d55aa3a087e718edf7bceb2f1cae2def4e65cd2b41ac2d lua-lyaml-6.2.8.tar.gz +sha256 796d267e51d61652c55694d21108e7352e98b1ed489ab7516acc07102157e08d LICENSE diff --git a/package/lua-lyaml/lua-lyaml.mk b/package/lua-lyaml/lua-lyaml.mk index 77980f531..00a868ec2 100644 --- a/package/lua-lyaml/lua-lyaml.mk +++ b/package/lua-lyaml/lua-lyaml.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUA_LYAML_VERSION = 6.2.7 +LUA_LYAML_VERSION = 6.2.8 LUA_LYAML_NAME_UPSTREAM = lyaml LUA_LYAML_SITE = $(call github,gvvaughan,$(LUA_LYAML_NAME_UPSTREAM),v$(LUA_LYAML_VERSION)) LUA_LYAML_LICENSE = MIT -- 2.37.2 From t_fahmy_bassem at hotmail.com Sun Oct 23 08:04:01 2022 From: t_fahmy_bassem at hotmail.com (Bassem Fahmy) Date: Sun, 23 Oct 2022 08:04:01 +0000 Subject: [Buildroot] defconfig fragments Message-ID: Hello, I understand that buildroot supports config fragments for packages (that support defconfig). But to patch the buildroot defconfig itself, the only way I could do it, is by calling > support/kconfig/merge_config.h xxxx_defconfig xxxx.config Is this the correct way? Is there a more standard way to patch a buildroot defconfig? Regards, Bassem? From ps.report at gmx.net Sun Oct 23 08:37:03 2022 From: ps.report at gmx.net (Peter Seiderer) Date: Sun, 23 Oct 2022 10:37:03 +0200 Subject: [Buildroot] [PATCH v2, 1/1] package/usbredir: bump to version 0.13.0 In-Reply-To: <20221022214439.174830-1-fontaine.fabrice@gmail.com> References: <20221022214439.174830-1-fontaine.fabrice@gmail.com> Message-ID: <20221023103703.0f0335bc@gmx.net> Hello Fabrice, On Sat, 22 Oct 2022 23:44:39 +0200, Fabrice Fontaine wrote: > usbredirserver was dropped by > https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 > > Add an option to enable tools (and usbredirect binary) as a replacement > to usbredirserver > > https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md > > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2 (after review of Peter Seiderer): > - Add an option to enable tools > > Config.in.legacy | 9 +++++++++ > package/usbredir/Config.in | 11 ++++++----- > package/usbredir/usbredir.hash | 4 ++-- > package/usbredir/usbredir.mk | 21 +++++++-------------- > 4 files changed, 24 insertions(+), 21 deletions(-) > > diff --git a/Config.in.legacy b/Config.in.legacy > index 0e63d59a98..efe35fde36 100644 > --- a/Config.in.legacy > +++ b/Config.in.legacy > @@ -146,6 +146,15 @@ endif > > comment "Legacy options removed in 2022.11" > > +config BR2_PACKAGE_USBREDIR_SERVER > + bool "usbredirserver removed" > + select BR2_LEGACY > + select BR2_PACKAGE_USBREDIR_TOOLS > + help > + usbredirserver has been dropped by upstream since version > + 0.13.0. usbredir tools (which include usbredirect binary) has > + been selected instead. > + > config BR2_KERNEL_HEADERS_5_17 > bool "kernel headers version 5.17.x are no longer supported" > select BR2_LEGACY > diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in > index 8ce180a884..d546ac1025 100644 > --- a/package/usbredir/Config.in > +++ b/package/usbredir/Config.in > @@ -15,18 +15,19 @@ config BR2_PACKAGE_USBREDIR > protocol. > > Note: only the library is installed, not the utilities. Say > - 'y' below if you want the server too. > + 'y' below if you want the tools too. > > http://www.spice-space.org/page/UsbRedir > > if BR2_PACKAGE_USBREDIR > > -config BR2_PACKAGE_USBREDIR_SERVER > - bool "usbredirserver on target" > +config BR2_PACKAGE_USBREDIR_TOOLS > + bool "Enable tools" > help > If you want to serve usbredir requests on your target, say > - 'y' here to have the usbredir server on the target. > + 'y' here to have the tools built and installed on the target > + (including usbredirect binary). > > - Note: the server is not required to use the library. > + Note: the tools are not required to use the library. > > endif > diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash > index f738c36690..577e08efba 100644 > --- a/package/usbredir/usbredir.hash > +++ b/package/usbredir/usbredir.hash > @@ -1,5 +1,5 @@ > -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum > -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz > +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum > +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz > > # Hash for license files > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk > index 6792a3e758..172f0d52a0 100644 > --- a/package/usbredir/usbredir.mk > +++ b/package/usbredir/usbredir.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -USBREDIR_VERSION = 0.12.0 > +USBREDIR_VERSION = 0.13.0 > USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz > USBREDIR_SITE = http://spice-space.org/download/usbredir > USBREDIR_LICENSE = LGPL-2.1+ (libraries) > @@ -14,21 +14,14 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb > USBREDIR_CONF_OPTS = \ > -Dgit_werror=disabled \ > -Dstack_protector=disabled \ > - -Dtests=disabled \ > - -Dtools=disabled > - > -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) > + -Dtests=disabled > > +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) > USBREDIR_LICENSE += , GPL-2.0+ (program) > USBREDIR_LICENSE_FILES += COPYING > - > -else # BR2_PACKAGE_USBREDIR_SERVER != y > - > -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver > -endef > -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER > - > -endif # BR2_PACKAGE_USBREDIR_SERVER > +USBREDIR_CONF_OPTS += -Dtools=enabled Build failed with: Found pkg-config: .../host/bin/pkgconf (1.6.3) Run-time dependency libusb-1.0 found: YES 1.0.26 Found CMake: /usr/bin/cmake (3.24.2) Run-time dependency glib-2.0 found: NO (tried pkgconfig and cmake) .../build/usbredir-0.13.0/tools/meson.build:17:4: ERROR: Dependency "glib-2.0" not found, tried pkgconfig and cmake Regards, Peter > +else > +USBREDIR_CONF_OPTS += -Dtools=disabled > +endif > > $(eval $(meson-package)) From fontaine.fabrice at gmail.com Sun Oct 23 08:52:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 10:52:51 +0200 Subject: [Buildroot] [PATCH v3, 1/1] package/usbredir: bump to version 0.13.0 Message-ID: <20221023085251.8723-1-fontaine.fabrice@gmail.com> usbredirserver was dropped by https://gitlab.freedesktop.org/spice/usbredir/-/commit/f4ffdce329305da2803684776f7659083a530819 Add an option to enable tools (and usbredirect binary) as a replacement to usbredirserver https://gitlab.freedesktop.org/spice/usbredir/-/blob/usbredir-0.13.0/ChangeLog.md Signed-off-by: Fabrice Fontaine --- Changes v2 -> v3 (after review of Peter Seiderer): - Add libglib2 dependency Changes v1 -> v2 (after review of Peter Seiderer): - Add an option to enable tools Config.in.legacy | 8 ++++++++ package/usbredir/Config.in | 18 +++++++++++++----- package/usbredir/usbredir.hash | 4 ++-- package/usbredir/usbredir.mk | 22 ++++++++-------------- 4 files changed, 31 insertions(+), 21 deletions(-) diff --git a/Config.in.legacy b/Config.in.legacy index 0e63d59a98..17f0858e70 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -146,6 +146,14 @@ endif comment "Legacy options removed in 2022.11" +config BR2_PACKAGE_USBREDIR_SERVER + bool "usbredirserver removed" + select BR2_LEGACY + help + usbredirserver has been dropped by upstream since version + 0.13.0. usbredir tools (which include usbredirect binary) can + be used as a replacement. + config BR2_KERNEL_HEADERS_5_17 bool "kernel headers version 5.17.x are no longer supported" select BR2_LEGACY diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in index 8ce180a884..3e2e32568d 100644 --- a/package/usbredir/Config.in +++ b/package/usbredir/Config.in @@ -15,18 +15,26 @@ config BR2_PACKAGE_USBREDIR protocol. Note: only the library is installed, not the utilities. Say - 'y' below if you want the server too. + 'y' below if you want the tools too. http://www.spice-space.org/page/UsbRedir if BR2_PACKAGE_USBREDIR -config BR2_PACKAGE_USBREDIR_SERVER - bool "usbredirserver on target" +config BR2_PACKAGE_USBREDIR_TOOLS + bool "Enable tools" + depends on BR2_USE_MMU # libglib2 + depends on BR2_USE_WCHAR # libglib2 + select BR2_PACKAGE_LIBGLIB2 help If you want to serve usbredir requests on your target, say - 'y' here to have the usbredir server on the target. + 'y' here to have the tools built and installed on the target + (including usbredirect binary). - Note: the server is not required to use the library. + Note: the tools are not required to use the library. + +comment "tools needs a toolchain w/ wchar" + depends on BR2_USE_MMU + depends on !BR2_USE_WCHAR endif diff --git a/package/usbredir/usbredir.hash b/package/usbredir/usbredir.hash index f738c36690..577e08efba 100644 --- a/package/usbredir/usbredir.hash +++ b/package/usbredir/usbredir.hash @@ -1,5 +1,5 @@ -# https://spice-space.org/download/usbredir/usbredir-0.12.0.tar.xz.sha256sum -sha256 fbb44025bf55e1ce8d84afc7596bfa47c8a36cd603c6fa440f9102c1c9761e6d usbredir-0.12.0.tar.xz +# https://spice-space.org/download/usbredir/usbredir-0.13.0.tar.xz.sha256sum +sha256 4ba6faa02c0ae6deeb4c53883d66ab54b3a5899bead42ce4ded9568b9a7dc46e usbredir-0.13.0.tar.xz # Hash for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk index 6792a3e758..325e7313aa 100644 --- a/package/usbredir/usbredir.mk +++ b/package/usbredir/usbredir.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBREDIR_VERSION = 0.12.0 +USBREDIR_VERSION = 0.13.0 USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.xz USBREDIR_SITE = http://spice-space.org/download/usbredir USBREDIR_LICENSE = LGPL-2.1+ (libraries) @@ -14,21 +14,15 @@ USBREDIR_DEPENDENCIES = host-pkgconf libusb USBREDIR_CONF_OPTS = \ -Dgit_werror=disabled \ -Dstack_protector=disabled \ - -Dtests=disabled \ - -Dtools=disabled - -ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y) + -Dtests=disabled +ifeq ($(BR2_PACKAGE_USBREDIR_TOOLS),y) USBREDIR_LICENSE += , GPL-2.0+ (program) USBREDIR_LICENSE_FILES += COPYING - -else # BR2_PACKAGE_USBREDIR_SERVER != y - -define USBREDIR_POST_INSTALL_TARGET_RM_SERVER - rm -f $(TARGET_DIR)/usr/sbin/usbredirserver -endef -USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER - -endif # BR2_PACKAGE_USBREDIR_SERVER +USBREDIR_DEPENDENCIES += libglib2 +USBREDIR_CONF_OPTS += -Dtools=enabled +else +USBREDIR_CONF_OPTS += -Dtools=disabled +endif $(eval $(meson-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 09:10:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 11:10:08 +0200 Subject: [Buildroot] [PATCH 1/2] package/lz4: fix LZ4_CPE_ID_VENDOR Message-ID: <20221023091009.18544-1-fontaine.fabrice@gmail.com> cpe:2.3:a:yann_collet:lz4, which was added by commit 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 While at it, also drop the note added by commit 45db4bb08e3e550db483d8745fe8aaede2fa7e98 Signed-off-by: Fabrice Fontaine --- package/lz4/lz4.mk | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 9b9b6198c3..541a03473a 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -9,13 +9,7 @@ LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING -LZ4_CPE_ID_VENDOR = yann_collet - -# CVE-2014-4715 is misclassified (by our CVE tracker) as affecting version -# 1.9.2, while in fact this issue has been fixed since lz4-r130: -# https://github.com/lz4/lz4/commit/140e6e72ddb6fc5f7cd28ce0c8ec3812ef4a9c08 -# See https://github.com/lz4/lz4/issues/818 -LZ4_IGNORE_CVES += CVE-2014-4715 +LZ4_CPE_ID_VENDOR = lz4_project # 0001-Fix-potential-memory-corruption-with-negative-memmov.patch LZ4_IGNORE_CVES += CVE-2021-3520 -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 09:10:09 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 11:10:09 +0200 Subject: [Buildroot] [PATCH 2/2] package/lz4: bump to version 1.9.4 In-Reply-To: <20221023091009.18544-1-fontaine.fabrice@gmail.com> References: <20221023091009.18544-1-fontaine.fabrice@gmail.com> Message-ID: <20221023091009.18544-2-fontaine.fabrice@gmail.com> LZ4 v1.9.4 is a maintenance release, featuring a substantial amount (~350 commits) of minor fixes and improvements, making it a recommended upgrade. The stable portion of liblz4 API is unmodified, making this release a drop-in replacement for existing features. - Drop patch (already in version) - Update hash of lib/LICENSE (update in year with https://github.com/lz4/lz4/commit/87a80acbe7872b9da7d56f7005ffd1b715e87c93) https://github.com/lz4/lz4/releases/tag/v1.9.4 Signed-off-by: Fabrice Fontaine --- ...mory-corruption-with-negative-memmov.patch | 26 ------------------- package/lz4/lz4.hash | 4 +-- package/lz4/lz4.mk | 5 +--- 3 files changed, 3 insertions(+), 32 deletions(-) delete mode 100644 package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch diff --git a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch b/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch deleted file mode 100644 index 57e4e38f84..0000000000 --- a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8301a21773ef61656225e264f4f06ae14462bca7 Mon Sep 17 00:00:00 2001 -From: Jasper Lievisse Adriaanse -Date: Fri, 26 Feb 2021 15:21:20 +0100 -Subject: [PATCH] Fix potential memory corruption with negative memmove() size - -Signed-off-by: Peter Korsgaard ---- - lib/lz4.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/lib/lz4.c b/lib/lz4.c -index 5f524d0..c2f504e 100644 ---- a/lib/lz4.c -+++ b/lib/lz4.c -@@ -1749,7 +1749,7 @@ LZ4_decompress_generic( - const size_t dictSize /* note : = 0 if noDict */ - ) - { -- if (src == NULL) { return -1; } -+ if ((src == NULL) || (outputSize < 0)) { return -1; } - - { const BYTE* ip = (const BYTE*) src; - const BYTE* const iend = ip + srcSize; --- -2.20.1 - diff --git a/package/lz4/lz4.hash b/package/lz4/lz4.hash index 0b03089ecd..04bd118cfe 100644 --- a/package/lz4/lz4.hash +++ b/package/lz4/lz4.hash @@ -1,4 +1,4 @@ # sha256 locally computed -sha256 030644df4611007ff7dc962d981f390361e6c97a34e5cbc393ddfbe019ffe2c1 lz4-1.9.3.tar.gz -sha256 d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71 lib/LICENSE +sha256 0b0e3aa07c8c063ddf40b082bdf7e37a1562bda40a0ff5272957f3e987e0e54b lz4-1.9.4.tar.gz +sha256 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c lib/LICENSE sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 programs/COPYING diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 541a03473a..5da1ae2703 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -4,16 +4,13 @@ # ################################################################################ -LZ4_VERSION = 1.9.3 +LZ4_VERSION = 1.9.4 LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING LZ4_CPE_ID_VENDOR = lz4_project -# 0001-Fix-potential-memory-corruption-with-negative-memmov.patch -LZ4_IGNORE_CVES += CVE-2021-3520 - ifeq ($(BR2_STATIC_LIBS),y) LZ4_MAKE_OPTS += BUILD_SHARED=no else ifeq ($(BR2_SHARED_LIBS),y) -- 2.35.1 From fperrad at gmail.com Sun Oct 23 11:48:41 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 13:48:41 +0200 Subject: [Buildroot] [PATCH] package/janet: bump to version 1.25.0 Message-ID: <20221023114841.505480-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/janet/janet.hash | 2 +- package/janet/janet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/janet/janet.hash b/package/janet/janet.hash index 473955e39..5cd3db1c2 100644 --- a/package/janet/janet.hash +++ b/package/janet/janet.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0b4d5d3632e0d376d9512ea8ea262f31f75c132b488dd7870f472acae709a865 janet-1.23.0.tar.gz +sha256 5bf9b680adbc5511835aec3787117df37032eef796e1664edbbcfd540b6acaf3 janet-1.25.0.tar.gz # Locally calculated sha256 e2d2ae8360d95386af751ac7d1a3da36ea8ceb230e5f0eba7eb762547b1c58c9 LICENSE diff --git a/package/janet/janet.mk b/package/janet/janet.mk index 070eae1cf..284e6c264 100644 --- a/package/janet/janet.mk +++ b/package/janet/janet.mk @@ -4,7 +4,7 @@ # ################################################################################ -JANET_VERSION = 1.23.0 +JANET_VERSION = 1.25.0 JANET_SITE = $(call github,janet-lang,janet,v$(JANET_VERSION)) JANET_LICENSE = MIT JANET_LICENSE_FILES = LICENSE -- 2.37.2 From fperrad at gmail.com Sun Oct 23 11:49:08 2022 From: fperrad at gmail.com (Francois Perrad) Date: Sun, 23 Oct 2022 13:49:08 +0200 Subject: [Buildroot] [PATCH] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 Message-ID: <20221023114908.505511-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/luajit/0001-no-bin-symlink.patch | 4 ++-- package/luajit/0002-install-inc.patch | 6 +++--- package/luajit/luajit.hash | 2 +- package/luajit/luajit.mk | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/package/luajit/0001-no-bin-symlink.patch b/package/luajit/0001-no-bin-symlink.patch index d32ec5ad6..dc36fa58d 100644 --- a/package/luajit/0001-no-bin-symlink.patch +++ b/package/luajit/0001-no-bin-symlink.patch @@ -6,7 +6,7 @@ Index: b/Makefile =================================================================== --- a/Makefile +++ b/Makefile -@@ -44,8 +44,7 @@ +@@ -45,8 +45,7 @@ INSTALL_MAN= $(INSTALL_SHARE)/man/man1 INSTALL_PKGCONFIG= $(INSTALL_LIB)/pkgconfig @@ -16,7 +16,7 @@ Index: b/Makefile INSTALL_ANAME= libluajit-$(ABIVER).a INSTALL_SOSHORT1= libluajit-$(ABIVER).so INSTALL_SOSHORT2= libluajit-$(ABIVER).so.$(MAJVER) -@@ -60,7 +59,6 @@ +@@ -61,7 +60,6 @@ INSTALL_SHORT1= $(INSTALL_LIB)/$(INSTALL_SOSHORT1) INSTALL_SHORT2= $(INSTALL_LIB)/$(INSTALL_SOSHORT2) INSTALL_T= $(INSTALL_BIN)/$(INSTALL_TNAME) diff --git a/package/luajit/0002-install-inc.patch b/package/luajit/0002-install-inc.patch index 5f6547fc3..8de777dce 100644 --- a/package/luajit/0002-install-inc.patch +++ b/package/luajit/0002-install-inc.patch @@ -10,8 +10,8 @@ Index: b/Makefile INSTALL_BIN= $(DPREFIX)/bin INSTALL_LIB= $(DPREFIX)/$(MULTILIB) INSTALL_SHARE= $(DPREFIX)/share --INSTALL_INC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) -+INSTALL_INC= $(DPREFIX)/include +-INSTALL_DEFINC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) ++INSTALL_DEFINC= $(DPREFIX)/include + INSTALL_INC= $(INSTALL_DEFINC) INSTALL_LJLIBD= $(INSTALL_SHARE)/luajit-$(VERSION) - INSTALL_JITLIB= $(INSTALL_LJLIBD)/jit diff --git a/package/luajit/luajit.hash b/package/luajit/luajit.hash index 648d6eb18..d00cea4ee 100644 --- a/package/luajit/luajit.hash +++ b/package/luajit/luajit.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 e0389c7669f8e455383d8f0c9d9354d44cdd1885bbf8fd0d4bcdb8fc6f794063 luajit-5677985dc1f19cf0a67112f4365c7fb79237fa16.tar.gz +sha256 19a911fdd77af69e48fa50749606a9009696f543cc88e898b4480d8d3c8828f5 luajit-6c4826f12c4d33b8b978004bc681eb1eef2be977.tar.gz # Locally calculated sha256 52fc5b15ac968ed81aabb4c1e23ab3bce50f57a5764e9cdca86b463a11072921 COPYRIGHT diff --git a/package/luajit/luajit.mk b/package/luajit/luajit.mk index 2c1e3216e..c79f18bf6 100644 --- a/package/luajit/luajit.mk +++ b/package/luajit/luajit.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUAJIT_VERSION = 5677985dc1f19cf0a67112f4365c7fb79237fa16 +LUAJIT_VERSION = 6c4826f12c4d33b8b978004bc681eb1eef2be977 LUAJIT_SITE = $(call github,LuaJIT,LuaJIT,$(LUAJIT_VERSION)) LUAJIT_LICENSE = MIT LUAJIT_LICENSE_FILES = COPYRIGHT -- 2.37.2 From fontaine.fabrice at gmail.com Sun Oct 23 14:17:06 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 16:17:06 +0200 Subject: [Buildroot] [PATCH 1/1] package/lirc-tools: bump to version 0.10.2 Message-ID: <20221023141706.197964-1-fontaine.fabrice@gmail.com> - Drop first to third patches (already in version) - Add a patch to disable documentation and avoid a build failure without doxygen https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS Signed-off-by: Fabrice Fontaine --- .../0001-Fix-build-without-Python.patch | 63 ------------------- ...evinput.c-fix-build-with-musl-1.2.0.patch} | 0 ...0002-Fix-python-client-cross-compile.patch | 47 -------------- ...002-configure-add-disable-doc-option.patch | 52 +++++++++++++++ ...irc-version-detection-when-cross-com.patch | 51 --------------- package/lirc-tools/lirc-tools.hash | 8 +-- package/lirc-tools/lirc-tools.mk | 2 +- 7 files changed, 57 insertions(+), 166 deletions(-) delete mode 100644 package/lirc-tools/0001-Fix-build-without-Python.patch rename package/lirc-tools/{0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch => 0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch} (100%) delete mode 100644 package/lirc-tools/0002-Fix-python-client-cross-compile.patch create mode 100644 package/lirc-tools/0002-configure-add-disable-doc-option.patch delete mode 100644 package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch diff --git a/package/lirc-tools/0001-Fix-build-without-Python.patch b/package/lirc-tools/0001-Fix-build-without-Python.patch deleted file mode 100644 index b1940eac0d..0000000000 --- a/package/lirc-tools/0001-Fix-build-without-Python.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 71f329d997d949d3c12d62d2f1473a1c99ee49b0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Sun, 27 Aug 2017 21:30:37 +0300 -Subject: [PATCH] Fix build without Python - -Don't define HAVE_PYTHON35 when PYTHON_LIBS is empty. - -Also, don't build Python dependent code when HAVE_PYTHON35 is not -defined. - -This fixes build failures like: - -Makefile:1616: recipe for target 'python-pkg/dist/lirc-0.10.0.tar.gz' failed -make[3]: *** [python-pkg/dist/lirc-0.10.0.tar.gz] Error 1 -python-pkg/lirc/_client.c:1:20: fatal error: Python.h: No such file or directory - #include - ^ - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 74a2bcab6b - - Makefile.am | 2 ++ - configure.ac | 3 ++- - 2 files changed, 4 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index 9f3dd14340cc..d8164fcd44cf 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -104,6 +104,7 @@ dist_py_pkg_doc_DATA = python-pkg/doc/Doxyfile \ - - libpython = $(libdir)/python$(PYTHON_VERSION) - pydir = $(libpython)/site-packages/lirc -+if HAVE_PYTHON35 - py_LTLIBRARIES = python-pkg/lib/_client.la - python_pkg_lib__client_la_SOURCES = \ - python-pkg/lirc/_client.c -@@ -116,6 +117,7 @@ python_pkg_lib__client_la_LDFLAGS = \ - $(PYTHON_LIBS) - python_pkg_lib__client_la_LIBADD = \ - lib/liblirc_client.la -+endif - - pylint: .phony - $(MAKE) -C tools pylint -diff --git a/configure.ac b/configure.ac -index 4108688433f8..07d901deafdf 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -50,7 +50,8 @@ test -z "$PYTHON_LIBS" && \ - test -n "$PYTHON_LIBS" || \ - AC_MSG_WARN([No python package found (missing devel package?)]) - python_version_nodots=$(echo $PYTHON_VERSION | tr -d '.') --AM_CONDITIONAL(HAVE_PYTHON35, [test $python_version_nodots -ge 35]) -+AM_CONDITIONAL(HAVE_PYTHON35, [test -n "$PYTHON_LIBS" && \ -+ test $python_version_nodots -ge 35]) - CFLAGS="$CFLAGS $PYTHON_CFLAGS" - - --- -2.14.1 - diff --git a/package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch b/package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch similarity index 100% rename from package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch rename to package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch diff --git a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch b/package/lirc-tools/0002-Fix-python-client-cross-compile.patch deleted file mode 100644 index 02deefaf98..0000000000 --- a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 13c4ffcfde07f659a836fba4a604dc1c5024bb90 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 29 Aug 2017 11:37:36 +0300 -Subject: [PATCH] Fix python client cross compile - -The setup.py setuptools wrapper needs to use a version of python built -specifically for cross compiling to cross compile successfully. Allow -setting that in the environment using the SETUPTOOLS_ENV variable. - -Fixes the following build failure: - -/usr/bin/ld: skipping incompatible .../lirc-tools-0.10.0/lib/.libs/liblirc_client.so when searching for -llirc_client -/usr/bin/ld: cannot find -llirc_client -collect2: error: ld returned 1 exit status -error: command '/usr/bin/gcc' failed with exit status 1 -Makefile:1578: recipe for target 'all-local' failed - -Signed-off-by: Baruch Siach ---- -Upstream status: https://sourceforge.net/p/lirc/tickets/308/ - - Makefile.am | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index d8164fcd44cf..a16be4278ae2 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -131,6 +131,7 @@ pep8: $(py_PYTHON) - if HAVE_PYTHON35 - all-local: - cd python-pkg; \ -+ $(SETUPTOOLS_ENV) \ - CFLAGS="-I$(abs_top_srcdir)/lib -I$(abs_builddir)/lib" \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py \ - $(if $(VERBOSE),,-q) build -@@ -179,6 +180,7 @@ $(abs_builddir)/python-pkg/setup.py: - $(PYTHON_TARBALL): $(abs_builddir)/python-pkg/setup.py - cp $(top_builddir)/VERSION $(abs_builddir)/python-pkg - cd $(abs_builddir)/python-pkg; CFLAGS=-I$(abs_top_srcdir)/lib \ -+ $(SETUPTOOLS_ENV) \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py -q sdist - - $(top_builddir)/python-pkg/VERSION: VERSION --- -2.14.1 - diff --git a/package/lirc-tools/0002-configure-add-disable-doc-option.patch b/package/lirc-tools/0002-configure-add-disable-doc-option.patch new file mode 100644 index 0000000000..fab485ffef --- /dev/null +++ b/package/lirc-tools/0002-configure-add-disable-doc-option.patch @@ -0,0 +1,52 @@ +From e9d5cbc01e3c0d6a31e2dba2f224b7f3dd21db37 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Sun, 23 Oct 2022 16:10:50 +0200 +Subject: [PATCH] configure: add --disable-doc option + +Allow the user to disable documentation through --disable-doc + +Signed-off-by: Fabrice Fontaine +--- + Makefile.am | 6 +++++- + configure.ac | 8 ++++++++ + 2 files changed, 13 insertions(+), 1 deletion(-) + +diff --git a/Makefile.am b/Makefile.am +index 6718af13..58a321d8 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -45,7 +45,11 @@ if WITH_SYSTEMDSYSTEMUNITDIR + SYSTEMD_DIR = systemd + endif + +-SUBDIRS = lib daemons tools plugins configs doc $(SYSTEMD_DIR) ++if HAVE_DOC ++ DOC_DIR = doc ++endif ++ ++SUBDIRS = lib daemons tools plugins configs $(DOC_DIR) $(SYSTEMD_DIR) + + if INSTALL_ETC + +diff --git a/configure.ac b/configure.ac +index d28c6732..f3384c95 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -486,6 +486,14 @@ AC_ARG_VAR(SETUPTOOLS_ENV, + ) + + ++AC_ARG_ENABLE(doc, ++ [ --enable-doc Build and install documentation (default=yes)], ++ [ enable_doc="${enableval}" ], ++ [ enable_doc=yes] ++) ++AM_CONDITIONAL([HAVE_DOC], [test x$enable_doc = xyes]) ++ ++ + suffix=$(echo "$VERSION" | sed 's/.*-//') + AM_CONDITIONAL(DEVEL, [test x$suffix = xdevel]) + +-- +2.35.1 + diff --git a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch b/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch deleted file mode 100644 index 04fbfe6ea2..0000000000 --- a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 732fd31610a6790a927ea9ed6d660796a1641254 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 7 Sep 2017 08:12:01 +0200 -Subject: [PATCH] build: Fix lirc version detection when cross compiling. - -The setup.py script that runs on the host can't use the client library -built for target. So setup.py falls back to a wrong hard-coded VERSION -value. - -Instead of importing the target library, use exec() to read -lirc/config.py directly for its VERSION value. - -Fixes build failure: - -/usr/bin/install -c -m 644 ./python-pkg/dist/lirc-0.10.0.tar.gz \ - '.../output/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/lirc' -/usr/bin/install: cannot stat './python-pkg/dist/lirc-0.10.0.tar.gz': \ - No such file or directory - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 732fd31610a6 - - python-pkg/setup.py | 9 +++------ - 1 file changed, 3 insertions(+), 6 deletions(-) - -diff --git a/python-pkg/setup.py b/python-pkg/setup.py -index e9b33690f828..a2d92e0432aa 100644 ---- a/python-pkg/setup.py -+++ b/python-pkg/setup.py -@@ -6,14 +6,11 @@ import subprocess - import os.path - import os - --try: -- import lirc.config -- VERSION = lirc.config.VERSION.replace('-devel','') --except ImportError: -- VERSION='0.0.0' -- - from setuptools import setup, Extension - -+exec(open("lirc/config.py").read()) -+VERSION = VERSION.replace('-devel','') -+ - if 'CFLAGS' in os.environ: - cflags = os.environ['CFLAGS'].split() - if 'LDFLAGS' in os.environ: --- -2.14.1 - diff --git a/package/lirc-tools/lirc-tools.hash b/package/lirc-tools/lirc-tools.hash index 187768db47..4808508cca 100644 --- a/package/lirc-tools/lirc-tools.hash +++ b/package/lirc-tools/lirc-tools.hash @@ -1,6 +1,6 @@ -# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.1/ -sha1 9d6f6d18ac566a96ef4ca1d6909a4e8bc517d48a lirc-0.10.1.tar.bz2 -md5 86c3f8e4efaba10571addb8313d1e040 lirc-0.10.1.tar.bz2 +# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.2/ +sha1 02092890205891b6de5a699294485a1eedba46c5 lirc-0.10.2.tar.bz2 +md5 cb96cfb0af8067c0062e2f5a100f426a lirc-0.10.2.tar.bz2 # Locally computed -sha256 8b753c60df2a7f5dcda2db72c38e448ca300c3b4f6000c1501fcb0bd5df414f2 lirc-0.10.1.tar.bz2 +sha256 3d44ec8274881cf262f160805641f0827ffcc20ade0d85e7e6f3b90e0d3d222a lirc-0.10.2.tar.bz2 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lirc-tools/lirc-tools.mk b/package/lirc-tools/lirc-tools.mk index 05f20f5726..5263330741 100644 --- a/package/lirc-tools/lirc-tools.mk +++ b/package/lirc-tools/lirc-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIRC_TOOLS_VERSION = 0.10.1 +LIRC_TOOLS_VERSION = 0.10.2 LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION) LIRC_TOOLS_LICENSE = GPL-2.0+ -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 23 16:44:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 23 Oct 2022 18:44:44 +0200 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile In-Reply-To: <20221021091531.2989489-1-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <20221023164444.GA1058960@scaer> Oguz, All, On 2022-10-21 11:15 +0200, Oguz Ozhan spake thusly: > From: Oguz Ozhan > > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. This clearly states "for new projects", but we are not new! ;-) Why do we need to switch to pytest, and what does that bring us? (see below too) > - pytest is more robust and has more ability compared to nose2 You provide robustness and more abilities to advocate for switching to pytest, however, you do not explain what is currently broken that would be fixed by the pytest robustness, or what new features from pytest we could leverage, and how. Note that I am not opposed to switching, but we need a good rationale for switching. This commit should also come after we actually did the switch, i.e. we should first convert support/testing/ over to pytest, then modify the dockerfile accordingly, which allows to write a better coomit log. Also, please organise your commit logs as (first line is the title): support/docker: install pytest instead of nose2 Now that the tuntime test infra has switched to using pytest instead of nose2, install the appropriate packages in the Dockerfile for our reference build environment. Note that pytest-parallel is not available i Debian Bullseye, so we install it (and its depenencies) from Pypi instead. Signed-off-by: You See more below... > Signed-off-by: Oguz Ozhan > --- > support/docker/Dockerfile | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/support/docker/Dockerfile b/support/docker/Dockerfile > index f54c31b54a..fd1527b1f9 100644 > --- a/support/docker/Dockerfile > +++ b/support/docker/Dockerfile > @@ -38,8 +38,8 @@ RUN apt-get install -y --no-install-recommends \ > mercurial \ > openssh-server \ > python3 \ > + python3-pip \ > python3-flake8 \ > - python3-nose2 \ > python3-pexpect \ > python3-pytest \ > qemu-system-arm \ > @@ -53,6 +53,9 @@ RUN apt-get install -y --no-install-recommends \ > apt-get -y autoremove && \ > apt-get -y clean > > +# To be able to run tests in parallel > +RUN pip install pytest-parallel Please, pin the version so that the image is reproducible. Also, if pytest-parallel has dependencies, explicitly install those at pinned versions too. Also note in the commit log that pytest-parallel is not available in bullseye, so we need to get it from Pypi instead (as in my suggestion). Regards, Yann E. MORIN. > # To be able to generate a toolchain with locales, enable one UTF-8 locale > RUN sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen && \ > /usr/sbin/locale-gen > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 23 16:50:26 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 18:50:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 Message-ID: <20221023165026.13707-1-fontaine.fabrice@gmail.com> - Drop all patches (already in version) - Replace README by LICENSE file added with https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/releases/tag/v1.2.13 Signed-off-by: Fabrice Fontaine --- ...hat-discarded-provided-CC-definition.patch | 28 --------------- package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ------------------- .../0003-fix-CVE-2022-37434-regression.patch | 32 ----------------- package/libzlib/libzlib.hash | 4 +-- package/libzlib/libzlib.mk | 7 ++-- 5 files changed, 4 insertions(+), 102 deletions(-) delete mode 100644 package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch delete mode 100644 package/libzlib/0002-fix-CVE-2022-37434.patch delete mode 100644 package/libzlib/0003-fix-CVE-2022-37434-regression.patch diff --git a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch b/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch deleted file mode 100644 index 398e1c9481..0000000000 --- a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 05796d3d8d5546cf1b4dfe2cd72ab746afae505d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 28 Mar 2022 18:34:10 -0700 -Subject: [PATCH] Fix configure issue that discarded provided CC definition. - -Downloaded from upstream commit: -https://github.com/madler/zlib/commit/05796d3d8d5546cf1b4dfe2cd72ab746afae505d - -Signed-off-by: Bernd Kuhls ---- - configure | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/configure b/configure -index 52ff4a04e..3fa3e8618 100755 ---- a/configure -+++ b/configure -@@ -174,7 +174,10 @@ if test -z "$CC"; then - else - cc=${CROSS_PREFIX}cc - fi -+else -+ cc=${CC} - fi -+ - cflags=${CFLAGS-"-O3"} - # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure - case "$cc" in diff --git a/package/libzlib/0002-fix-CVE-2022-37434.patch b/package/libzlib/0002-fix-CVE-2022-37434.patch deleted file mode 100644 index a61be48536..0000000000 --- a/package/libzlib/0002-fix-CVE-2022-37434.patch +++ /dev/null @@ -1,35 +0,0 @@ -From eff308af425b67093bab25f80f1ae950166bece1 Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Sat, 30 Jul 2022 15:51:11 -0700 -Subject: [PATCH] Fix a bug when getting a gzip header extra field with - inflate(). - -If the extra field was larger than the space the user provided with -inflateGetHeader(), and if multiple calls of inflate() delivered -the extra header data, then there could be a buffer overflow of the -provided space. This commit assures that provided space is not -exceeded. - -Backported from: eff308af425b67093bab25f80f1ae950166bece1 -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7be8c6366..7a7289749 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,9 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -+ len = state->head->extra_len - state->length; - if (state->head != Z_NULL && -- state->head->extra != Z_NULL) { -- len = state->head->extra_len - state->length; -+ state->head->extra != Z_NULL && -+ len < state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch b/package/libzlib/0003-fix-CVE-2022-37434-regression.patch deleted file mode 100644 index 46a58710d2..0000000000 --- a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 8 Aug 2022 10:50:09 -0700 -Subject: [PATCH] Fix extra field processing bug that dereferences NULL - state->head. - -The recent commit to fix a gzip header extra field processing bug -introduced the new bug fixed here. - -Backported from: 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7a7289749..2a3c4fe98 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,10 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -- len = state->head->extra_len - state->length; - if (state->head != Z_NULL && - state->head->extra != Z_NULL && -- len < state->head->extra_max) { -+ (len = state->head->extra_len - state->length) < -+ state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/libzlib.hash b/package/libzlib/libzlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/libzlib/libzlib.hash +++ b/package/libzlib/libzlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/libzlib/libzlib.mk b/package/libzlib/libzlib.mk index f75502326b..e344cc7ad9 100644 --- a/package/libzlib/libzlib.mk +++ b/package/libzlib/libzlib.mk @@ -4,19 +4,16 @@ # ################################################################################ -LIBZLIB_VERSION = 1.2.12 +LIBZLIB_VERSION = 1.2.13 LIBZLIB_SOURCE = zlib-$(LIBZLIB_VERSION).tar.xz LIBZLIB_SITE = http://www.zlib.net LIBZLIB_LICENSE = Zlib -LIBZLIB_LICENSE_FILES = README +LIBZLIB_LICENSE_FILES = LICENSE LIBZLIB_INSTALL_STAGING = YES LIBZLIB_PROVIDES = zlib LIBZLIB_CPE_ID_VENDOR = zlib LIBZLIB_CPE_ID_PRODUCT = zlib -# 0002-fix-CVE-2022-37434.patch -LIBZLIB_IGNORE_CVES = CVE-2022-37434 - # It is not possible to build only a shared version of zlib, so we build both # shared and static, unless we only want the static libs, and we eventually # selectively remove what we do not want -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 23 16:51:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 23 Oct 2022 18:51:00 +0200 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests In-Reply-To: <20221021091531.2989489-2-oguz.ozhan@mind.be> References: <20221021091531.2989489-1-oguz.ozhan@mind.be> <20221021091531.2989489-2-oguz.ozhan@mind.be> Message-ID: <20221023165100.GB1058960@scaer> Oguz, All, On 2022-10-21 11:15 +0200, Oguz Ozhan spake thusly: > From: Oguz Ozhan > > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 Please see my comment in patch 1 about providing a rationale for the switch. Please fold your commit logs at 72 chars. > - Changes in this patch: > - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests > - nose2 plugins removed which are not required anymore Don't describe the changes, explain them. E.g. "nose2 plugins removed which are not required anymore" we can see they get removed, and since the change is about switching away from nose2, it is obvious they get removed because they are not used anymore. > - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest This last part should be a patch by itself, coming first in the series, as it can be applied without doing the conversion yet. I have only had a cursory look at the changes, they look quite OK. Be sure to run "make check-flake8", I think I could spot too many lines at one place... Regards, Yann E. MORIN. > Signed-off-by: Oguz Ozhan > --- > support/testing/conf/unittest.cfg | 3 -- > support/testing/run-tests | 28 ++++++++++------- > support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ > 3 files changed, 36 insertions(+), 35 deletions(-) > > diff --git a/support/testing/conf/unittest.cfg b/support/testing/conf/unittest.cfg > index 4f516fb80a..0dfffcfbda 100644 > --- a/support/testing/conf/unittest.cfg > +++ b/support/testing/conf/unittest.cfg > @@ -1,5 +1,2 @@ > -[unittest] > -plugins = nose2.plugins.mp > - > [multiprocess] > always-on = True > diff --git a/support/testing/run-tests b/support/testing/run-tests > index bf40019362..f887bc6715 100755 > --- a/support/testing/run-tests > +++ b/support/testing/run-tests > @@ -4,10 +4,16 @@ import multiprocessing > import os > import sys > > -import nose2 > +import pytest > > from infra.basetest import BRConfigTest > > +class PyTestCollector: > + def __init__(self): > + self.collected = [] > + def pytest_collection_modifyitems(self, items): > + for item in items: > + self.collected.append(item.nodeid) > > def main(): > parser = argparse.ArgumentParser(description='Run Buildroot tests') > @@ -42,12 +48,10 @@ def main(): > BRConfigTest.logtofile = False > > if args.list: > - print("List of tests") > - nose2.discover(argv=[script_path, > - "-s", test_dir, > - "-v", > - "--collect-only"], > - plugins=["nose2.plugins.collect"]) > + collect_plugin = PyTestCollector() > + pytest.main(['--collect-only', '-p', 'no:terminal', test_dir], plugins=[collect_plugin]) > + for nodeid in collect_plugin.collected: > + print(nodeid) > return 0 > > if args.download is None: > @@ -106,15 +110,15 @@ def main(): > return 1 > BRConfigTest.timeout_multiplier = args.timeout_multiplier > > - nose2_args = ["-v", > - "-N", str(args.testcases), > - "-s", test_dir, > + pytest_args = ["--workers", str(args.testcases), > + "--rootdir", test_dir, > "-c", os.path.join(test_dir, "conf/unittest.cfg")] > > if args.testname: > - nose2_args += args.testname > + pytest_args += args.testname > + > + pytest.main(pytest_args) > > - nose2.discover(argv=nose2_args) > > > if __name__ == "__main__": > diff --git a/support/testing/tests/fs/test_iso9660.py b/support/testing/tests/fs/test_iso9660.py > index 692291267e..d2390cccf1 100644 > --- a/support/testing/tests/fs/test_iso9660.py > +++ b/support/testing/tests/fs/test_iso9660.py > @@ -25,7 +25,7 @@ BASIC_CONFIG = \ > """.format(infra.filepath("conf/minimal-x86-qemu-kernel.config")) > > > -def test_mount_internal_external(emulator, builddir, internal=True, efi=False): > +def do_test_mount_internal_external(emulator, builddir, internal=True, efi=False): > img = os.path.join(builddir, "images", "rootfs.iso9660") > if efi: > efi_img = os.path.join(builddir, "images", "OVMF.fd") > @@ -43,7 +43,7 @@ def test_mount_internal_external(emulator, builddir, internal=True, efi=False): > return exit_code > > > -def test_touch_file(emulator): > +def do_test_touch_file(emulator): > _, exit_code = emulator.run("touch test") > return exit_code > > @@ -63,11 +63,11 @@ class TestIso9660Grub2External(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -84,11 +84,11 @@ class TestIso9660Grub2ExternalCompress(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -104,11 +104,11 @@ class TestIso9660Grub2Internal(infra.basetest.BRTest): > """.format(infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -127,12 +127,12 @@ class TestIso9660Grub2EFI(infra.basetest.BRTest): > infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -155,22 +155,22 @@ class TestIso9660Grub2Hybrid(infra.basetest.BRTest): > infra.filepath("conf/grub2.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > self.emulator.stop() > > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True, > efi=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > > > @@ -189,11 +189,11 @@ class TestIso9660SyslinuxExternal(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -209,11 +209,11 @@ class TestIso9660SyslinuxExternalCompress(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=False) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 1) > > > @@ -228,9 +228,9 @@ class TestIso9660SyslinuxInternal(infra.basetest.BRTest): > """.format(infra.filepath("conf/isolinux.cfg")) > > def test_run(self): > - exit_code = test_mount_internal_external(self.emulator, > + exit_code = do_test_mount_internal_external(self.emulator, > self.builddir, internal=True) > self.assertEqual(exit_code, 0) > > - exit_code = test_touch_file(self.emulator) > + exit_code = do_test_touch_file(self.emulator) > self.assertEqual(exit_code, 0) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 23 16:57:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 18:57:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxmlpp: bump to version 5.0.2 Message-ID: <20221023165758.24401-1-fontaine.fabrice@gmail.com> https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS Signed-off-by: Fabrice Fontaine --- package/libxmlpp/libxmlpp.hash | 4 ++-- package/libxmlpp/libxmlpp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxmlpp/libxmlpp.hash b/package/libxmlpp/libxmlpp.hash index 50238eff00..a974de57e3 100644 --- a/package/libxmlpp/libxmlpp.hash +++ b/package/libxmlpp/libxmlpp.hash @@ -1,5 +1,5 @@ -# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.1.sha256sum -sha256 15c38307a964fa6199f4da6683a599eb7e63cc89198545b36349b87cf9aa0098 libxml++-5.0.1.tar.xz +# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.2.sha256sum +sha256 7c17cc3e5a2214314dee5a1354f4b436f266ded6185232a0534f352a76240d5a libxml++-5.0.2.tar.xz # Hash for license file sha256 a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7 COPYING diff --git a/package/libxmlpp/libxmlpp.mk b/package/libxmlpp/libxmlpp.mk index 874577eb1f..3db711826e 100644 --- a/package/libxmlpp/libxmlpp.mk +++ b/package/libxmlpp/libxmlpp.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXMLPP_VERSION_MAJOR = 5.0 -LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).1 +LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).2 LIBXMLPP_LICENSE = LGPL-2.1 (library), LGPL-2.0+ (examples) LIBXMLPP_LICENSE_FILES = COPYING LIBXMLPP_SOURCE = libxml++-$(LIBXMLPP_VERSION).tar.xz -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 17:04:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 19:04:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/libssh: bump to version 0.10.4 Message-ID: <20221023170441.30650-1-fontaine.fabrice@gmail.com> https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 Signed-off-by: Fabrice Fontaine --- package/libssh/libssh.hash | 4 ++-- package/libssh/libssh.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libssh/libssh.hash b/package/libssh/libssh.hash index 4dbab11374..90bc4c82d8 100644 --- a/package/libssh/libssh.hash +++ b/package/libssh/libssh.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://www.libssh.org/files/0.9/libssh-0.9.6.tar.xz.asc +# https://www.libssh.org/files/0.10/libssh-0.10.4.tar.xz.asc # with key 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D -sha256 86bcf885bd9b80466fe0e05453c58b877df61afa8ba947a58c356d7f0fab829b libssh-0.9.6.tar.xz +sha256 07392c54ab61476288d1c1f0a7c557b50211797ad00c34c3af2bbc4dbc4bd97d libssh-0.10.4.tar.xz sha256 1656186e951db1c010a8485481fa94587f7e53a26d24976bef97945ad0c4df5a COPYING diff --git a/package/libssh/libssh.mk b/package/libssh/libssh.mk index 4cadf83aee..5deb64b82e 100644 --- a/package/libssh/libssh.mk +++ b/package/libssh/libssh.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBSSH_VERSION_MAJOR = 0.9 -LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).6 +LIBSSH_VERSION_MAJOR = 0.10 +LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).4 LIBSSH_SOURCE = libssh-$(LIBSSH_VERSION).tar.xz LIBSSH_SITE = https://www.libssh.org/files/$(LIBSSH_VERSION_MAJOR) LIBSSH_LICENSE = LGPL-2.1 -- 2.35.1 From peter at korsgaard.com Sun Oct 23 17:23:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:23:49 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022112243.31889-1-neal.frager@amd.com> (Neal Frager's message of "Sat, 22 Oct 2022 05:22:43 -0600") References: <20221022112243.31889-1-neal.frager@amd.com> Message-ID: <871qqy4foa.fsf@dell.be.48ers.dk> >>>>> "Neal" == Neal Frager writes: > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. > https://github.com/Xilinx/bootgen > Signed-off-by: Neal Frager > --- > V1-> V2: > - improved build statement to support older hosts > - added bootgen.hash Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:24:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/irssi: bump to version 1.4.2 In-Reply-To: <20221021222412.109567-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:24:12 +0200") References: <20221021222412.109567-1-fontaine.fabrice@gmail.com> Message-ID: <87wn8q312w.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Use offical tarball link (from https://irssi.org/download) s/offical/official/ > https://irssi.org/2022/07/17/irssi-1.4.2-released/ > https://irssi.org/2022/06/12/irssi-1.4.1-released/ > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:24:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 In-Reply-To: <20221021223144.116049-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:31:44 +0200") References: <20221021223144.116049-1-fontaine.fabrice@gmail.com> Message-ID: <87sfje312q.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/drowe67/codec2/releases/tag/v1.0.3 > https://github.com/drowe67/codec2/releases/tag/v1.0.4 > https://github.com/drowe67/codec2/releases/tag/v1.0.5 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/whois: bump to version 5.5.14 In-Reply-To: <20221022205311.152019-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:53:11 +0200") References: <20221022205311.152019-1-fontaine.fabrice@gmail.com> Message-ID: <87o7u2311o.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/vnstat: bump to version 2.10 In-Reply-To: <20221022204631.147518-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:46:31 +0200") References: <20221022204631.147518-1-fontaine.fabrice@gmail.com> Message-ID: <87k04q3114.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/vergoh/vnstat/blob/v2.10/CHANGES > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:25:46 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:46 +0200 Subject: [Buildroot] [PATCH] package/janet: bump to version 1.25.0 In-Reply-To: <20221023114841.505480-1-francois.perrad@gadz.org> (Francois Perrad's message of "Sun, 23 Oct 2022 13:48:41 +0200") References: <20221023114841.505480-1-francois.perrad@gadz.org> Message-ID: <87fsfe310l.fsf@dell.be.48ers.dk> >>>>> "Francois" == Francois Perrad writes: > Signed-off-by: Francois Perrad Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 17:20:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:20:53 +0200 Subject: [Buildroot] [git commit] package/libcodec2: bump to version 1.0.5 Message-ID: <20221023172606.A28B886EC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a380244766342aa7172dc7b572c99db322f74c38 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/drowe67/codec2/releases/tag/v1.0.3 https://github.com/drowe67/codec2/releases/tag/v1.0.4 https://github.com/drowe67/codec2/releases/tag/v1.0.5 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libcodec2/libcodec2.hash | 2 +- package/libcodec2/libcodec2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libcodec2/libcodec2.hash b/package/libcodec2/libcodec2.hash index 795ca37006..ba44aa015c 100644 --- a/package/libcodec2/libcodec2.hash +++ b/package/libcodec2/libcodec2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 14227963940d79e0ec5af810f37101b30e1c7e8555abd96c56b3c0473abac8ef libcodec2-1.0.1.tar.gz +sha256 cd9a065dd1c3477f6172a0156294f767688847e4d170103d1f08b3a075f82826 libcodec2-1.0.5.tar.gz sha256 9ebb6f82b7380a62ac74c5f0322c88e6744dedf2ebe1f54d6f088282b39844bf COPYING diff --git a/package/libcodec2/libcodec2.mk b/package/libcodec2/libcodec2.mk index b4f08a496e..b97db8ff59 100644 --- a/package/libcodec2/libcodec2.mk +++ b/package/libcodec2/libcodec2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCODEC2_VERSION = 1.0.1 +LIBCODEC2_VERSION = 1.0.5 LIBCODEC2_SITE = $(call github,drowe67,codec2,v$(LIBCODEC2_VERSION)) LIBCODEC2_LICENSE = LGPL-2.1 LIBCODEC2_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 23 17:20:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:20:29 +0200 Subject: [Buildroot] [git commit] package/irssi: bump to version 1.4.2 Message-ID: <20221023172606.9973786EC4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68e1b602dab1e08dc7c494cfdfeece5139796f4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official tarball link (from https://irssi.org/download) https://irssi.org/2022/07/17/irssi-1.4.2-released/ https://irssi.org/2022/06/12/irssi-1.4.1-released/ Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/irssi/irssi.hash | 2 +- package/irssi/irssi.mk | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/irssi/irssi.hash b/package/irssi/irssi.hash index 05555250a7..ecd339d83d 100644 --- a/package/irssi/irssi.hash +++ b/package/irssi/irssi.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 a647bfefed14d2221fa77b6edac594934dc672c4a560417b1abcbbc6b88d769f irssi-1.2.3.tar.xz +sha256 79a4765d2dfe153c440a1775b074d5d0682b96814c7cf92325b5e15ce50e26a8 irssi-1.4.2.tar.xz # Locally calculated sha256 a1a27cb2ecee8d5378fbb3562f577104a445d6d66fee89286e16758305e63e2b COPYING diff --git a/package/irssi/irssi.mk b/package/irssi/irssi.mk index da71622a04..c2d02289ad 100644 --- a/package/irssi/irssi.mk +++ b/package/irssi/irssi.mk @@ -4,11 +4,9 @@ # ################################################################################ -IRSSI_VERSION = 1.2.3 +IRSSI_VERSION = 1.4.2 IRSSI_SOURCE = irssi-$(IRSSI_VERSION).tar.xz -# Do not use the github helper here. The generated tarball is *NOT* the -# same as the one uploaded by upstream for the release. -IRSSI_SITE = https://github.com/irssi/irssi/releases/download/$(IRSSI_VERSION) +IRSSI_SITE = https://codeberg.org/irssi/irssi/releases/download/$(IRSSI_VERSION) IRSSI_LICENSE = GPL-2.0+ IRSSI_LICENSE_FILES = COPYING IRSSI_CPE_ID_VENDOR = irssi From peter at korsgaard.com Sun Oct 23 17:25:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:22 +0200 Subject: [Buildroot] [git commit] package/vnstat: bump to version 2.10 Message-ID: <20221023172606.C46CE86EC4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c78c6f23c543525f352924544fb299784e0838c8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/vergoh/vnstat/blob/v2.10/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/vnstat/vnstat.hash | 2 +- package/vnstat/vnstat.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/vnstat/vnstat.hash b/package/vnstat/vnstat.hash index 191dc4ec0b..bad4325d90 100644 --- a/package/vnstat/vnstat.hash +++ b/package/vnstat/vnstat.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 03f858a7abf6bd85bb8cd595f3541fc3bd31f8f400ec092ef3034825ccb77c25 vnstat-2.8.tar.gz +sha256 a9c61744e5cd8c366e2db4d282badc74021ddb614bd65b41240937997e457d25 vnstat-2.10.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/vnstat/vnstat.mk b/package/vnstat/vnstat.mk index 91f0233f56..3b2951b8c9 100644 --- a/package/vnstat/vnstat.mk +++ b/package/vnstat/vnstat.mk @@ -4,7 +4,7 @@ # ################################################################################ -VNSTAT_VERSION = 2.8 +VNSTAT_VERSION = 2.10 VNSTAT_SITE = http://humdi.net/vnstat VNSTAT_LICENSE = GPL-2.0 VNSTAT_LICENSE_FILES = COPYING From peter at korsgaard.com Sun Oct 23 17:21:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:21:12 +0200 Subject: [Buildroot] [git commit] package/bootgen: add bootgen host package Message-ID: <20221023172606.AE4CF86EC9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=08a0dea25f4e92ac5aa474876f706ddb9452fe2b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This patch adds Xilinx bootgen as a host package to buildroot. bootgen is a required utility for generating a boot.bin for Xilinx versal products. In addition, for developers who wish to use secure boot with Xilinx SoC products such as zynq and zynqmp, bootgen has a more complete offering in secure boot features than the u-boot mkimage utility. https://github.com/Xilinx/bootgen Signed-off-by: Neal Frager Signed-off-by: Peter Korsgaard --- DEVELOPERS | 1 + package/Config.in.host | 1 + package/bootgen/Config.in.host | 10 ++++++++++ package/bootgen/bootgen.hash | 3 +++ package/bootgen/bootgen.mk | 25 +++++++++++++++++++++++++ 5 files changed, 40 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c0e6f8bbef..c8183b2290 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,6 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig +F: package/bootgen N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in.host b/package/Config.in.host index d6b9ee0e2d..8ccbf40a84 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -7,6 +7,7 @@ menu "Host utilities" source "package/asn1c/Config.in.host" source "package/babeltrace2/Config.in.host" source "package/bmap-tools/Config.in.host" + source "package/bootgen/Config.in.host" source "package/btrfs-progs/Config.in.host" source "package/cbootimage/Config.in.host" source "package/checkpolicy/Config.in.host" diff --git a/package/bootgen/Config.in.host b/package/bootgen/Config.in.host new file mode 100644 index 0000000000..0acb58dee0 --- /dev/null +++ b/package/bootgen/Config.in.host @@ -0,0 +1,10 @@ +config BR2_PACKAGE_HOST_BOOTGEN + bool "host bootgen" + help + bootgen is a tool to generate a boot.bin firmware + for Xilinx versal, zynqmp and zynq product families. + + Additional secure boot features are supported beyond + what is included with u-boot mkimage. + + https://github.com/Xilinx/bootgen diff --git a/package/bootgen/bootgen.hash b/package/bootgen/bootgen.hash new file mode 100644 index 0000000000..5d77c164f3 --- /dev/null +++ b/package/bootgen/bootgen.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 7e07c75aa3e3965c8e33faefde037877f78130451cebc2056b096db9c66acbb3 bootgen-xilinx_v2022.2.tar.gz +sha256 4da5f5eff0592e5d275f1871faf9e9a4fc0f6346027bfb777fa59d0aa6a59aa3 LICENSE diff --git a/package/bootgen/bootgen.mk b/package/bootgen/bootgen.mk new file mode 100644 index 0000000000..88bc73b604 --- /dev/null +++ b/package/bootgen/bootgen.mk @@ -0,0 +1,25 @@ +################################################################################ +# +# bootgen +# +################################################################################ + +BOOTGEN_VERSION = xilinx_v2022.2 +BOOTGEN_SITE = $(call github,Xilinx,bootgen,$(BOOTGEN_VERSION)) +HOST_BOOTGEN_DEPENDENCIES = host-openssl host-pkgconf +BOOTGEN_LICENSE = Apache-2.0 +BOOTGEN_LICENSE_FILES = LICENSE + +define HOST_BOOTGEN_BUILD_CMDS + $(MAKE) $(HOST_CONFIGURE_OPTS) \ + LIBS="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --libs libssl libcrypto`" \ + INCLUDE_USER="`$(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY) --cflags libssl libcrypto`" \ + CXXFLAGS="$(HOST_CXXFLAGS) -std=c++0x" \ + -C $(@D) +endef + +define HOST_BOOTGEN_INSTALL_CMDS + $(INSTALL) -m 0755 -D $(@D)/bootgen $(HOST_DIR)/bin/bootgen +endef + +$(eval $(host-generic-package)) From peter at korsgaard.com Sun Oct 23 17:24:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:24:42 +0200 Subject: [Buildroot] [git commit] package/whois: bump to version 5.5.14 Message-ID: <20221023172606.B91F186ECD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6024f64a7d0513398e2040a58ffcd9f2dbaeb566 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/whois/whois.hash | 4 ++-- package/whois/whois.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/whois/whois.hash b/package/whois/whois.hash index 3b5bbee23d..fb140fa198 100644 --- a/package/whois/whois.hash +++ b/package/whois/whois.hash @@ -1,5 +1,5 @@ -# From http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois/whois_5.5.13.dsc -sha256 62e613f116d5635aea6684238db00b030a6602ffc79462e4a0a8e62cb184b5d7 whois_5.5.13.tar.xz +# From http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois/whois_5.5.14.dsc +sha256 bf9c2cb307d5419b34ad401eecf2820b8f69660db41cf0762e5da71fa2df68e8 whois_5.5.14.tar.xz # Hash for license file: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/whois/whois.mk b/package/whois/whois.mk index 42a9e83954..5a85bea358 100644 --- a/package/whois/whois.mk +++ b/package/whois/whois.mk @@ -4,8 +4,8 @@ # ################################################################################ -WHOIS_VERSION = 5.5.13 -WHOIS_SITE = http://snapshot.debian.org/archive/debian/20220408T031931Z/pool/main/w/whois +WHOIS_VERSION = 5.5.14 +WHOIS_SITE = http://snapshot.debian.org/archive/debian/20221017T031443Z/pool/main/w/whois WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz WHOIS_DEPENDENCIES = \ host-pkgconf \ From peter at korsgaard.com Sun Oct 23 17:25:40 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 19:25:40 +0200 Subject: [Buildroot] [git commit] package/janet: bump to version 1.25.0 Message-ID: <20221023172606.CF82F86EC5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ae39821e26e28c2e24d54fcaf66824fc02f3f240 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Peter Korsgaard --- package/janet/janet.hash | 2 +- package/janet/janet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/janet/janet.hash b/package/janet/janet.hash index 473955e391..5cd3db1c29 100644 --- a/package/janet/janet.hash +++ b/package/janet/janet.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 0b4d5d3632e0d376d9512ea8ea262f31f75c132b488dd7870f472acae709a865 janet-1.23.0.tar.gz +sha256 5bf9b680adbc5511835aec3787117df37032eef796e1664edbbcfd540b6acaf3 janet-1.25.0.tar.gz # Locally calculated sha256 e2d2ae8360d95386af751ac7d1a3da36ea8ceb230e5f0eba7eb762547b1c58c9 LICENSE diff --git a/package/janet/janet.mk b/package/janet/janet.mk index 070eae1cf0..284e6c2642 100644 --- a/package/janet/janet.mk +++ b/package/janet/janet.mk @@ -4,7 +4,7 @@ # ################################################################################ -JANET_VERSION = 1.23.0 +JANET_VERSION = 1.25.0 JANET_SITE = $(call github,janet-lang,janet,v$(JANET_VERSION)) JANET_LICENSE = MIT JANET_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 18:54:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinyssh: bump to version 20220801 In-Reply-To: <20221022205934.156714-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:59:34 +0200") References: <20221022205934.156714-1-fontaine.fabrice@gmail.com> Message-ID: <87bkq22wwm.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/janmojzis/tinyssh/releases/tag/20220101 > https://github.com/janmojzis/tinyssh/releases/tag/20220222 > https://github.com/janmojzis/tinyssh/releases/tag/20220305 > https://github.com/janmojzis/tinyssh/releases/tag/20220311 > https://github.com/janmojzis/tinyssh/releases/tag/20220801 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:54:21 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:21 +0200 Subject: [Buildroot] [git commit] package/tinyssh: bump to version 20220801 Message-ID: <20221023185437.B344D86EF5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=88661b8aa11ac0a6770e809fbc87f2dfec506fcc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/janmojzis/tinyssh/releases/tag/20220101 https://github.com/janmojzis/tinyssh/releases/tag/20220222 https://github.com/janmojzis/tinyssh/releases/tag/20220305 https://github.com/janmojzis/tinyssh/releases/tag/20220311 https://github.com/janmojzis/tinyssh/releases/tag/20220801 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/tinyssh/tinyssh.hash | 2 +- package/tinyssh/tinyssh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tinyssh/tinyssh.hash b/package/tinyssh/tinyssh.hash index 30b5d13419..462ffb9002 100644 --- a/package/tinyssh/tinyssh.hash +++ b/package/tinyssh/tinyssh.hash @@ -1,3 +1,3 @@ # locally computed -sha256 2a051437878998c7782d9d38ef13e5e7a76435ae6b9c3e9ec492c3a567bd6314 tinyssh-20210601.tar.gz +sha256 234656fc8d369608eb5d0f3a26280e0e38e2e6b134cfc610b6e24bce176acd4f tinyssh-20220801.tar.gz sha256 b5dc19477e29f4111e1c16cd89ec0782f5a07b1a30e3bdb7c155425b81b12c46 LICENCE diff --git a/package/tinyssh/tinyssh.mk b/package/tinyssh/tinyssh.mk index 05716bcfe1..1472f7ead1 100644 --- a/package/tinyssh/tinyssh.mk +++ b/package/tinyssh/tinyssh.mk @@ -4,7 +4,7 @@ # ################################################################################ -TINYSSH_VERSION = 20210601 +TINYSSH_VERSION = 20220801 TINYSSH_SITE = $(call github,janmojzis,tinyssh,$(TINYSSH_VERSION)) TINYSSH_LICENSE = Public Domain, CC0-1.0 TINYSSH_LICENSE_FILES = LICENCE From peter at korsgaard.com Sun Oct 23 18:55:12 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:12 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: bump to version 1.1.2 In-Reply-To: <20221022202857.128289-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:28:57 +0200") References: <20221022202857.128289-1-fontaine.fabrice@gmail.com> Message-ID: <877d0q2wvj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:55:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:48 +0200 Subject: [Buildroot] [PATCH v2,1/1] package/uftp: bump to version 5.0.1 In-Reply-To: <20221022203335.131939-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 22:33:35 +0200") References: <20221022203335.131939-1-fontaine.fabrice@gmail.com> Message-ID: <8735be2wuj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Version 5.0.1 - 8/2/2022 > - On very low speed transfers (<10Kbps) sessions would time out due to > a very large interpacket transmission interval. Fixed by putting a > lower limit on the advertised GRTT of of the interpacket transmission > interval. > - Sending of ABORT messages on early shutdown would sometimes fail due > to OpenSSL cleanup functions running before application cleanup. > Changed the ordering of atexit() handlers to ensure OpenSSL cleanup > happens last. > - Fixed missing timestamp update when clients read CONG_CTRL messages > - Fix to GRTT handling on server to ensure it doesn't fall below minumim. > - Fixed bypassed checking of existing files on client for backup > - Various logging fixes > https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2: > - Update tarball hash Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 18:55:33 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:55:33 +0200 Subject: [Buildroot] [git commit] package/uftp: bump to version 5.0.1 Message-ID: <20221023185600.C2BEA86F41@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=744607a5cb966e3100494d9fb7f40172336c5605 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 5.0.1 - 8/2/2022 - On very low speed transfers (<10Kbps) sessions would time out due to a very large interpacket transmission interval. Fixed by putting a lower limit on the advertised GRTT of of the interpacket transmission interval. - Sending of ABORT messages on early shutdown would sometimes fail due to OpenSSL cleanup functions running before application cleanup. Changed the ordering of atexit() handlers to ensure OpenSSL cleanup happens last. - Fixed missing timestamp update when clients read CONG_CTRL messages - Fix to GRTT handling on server to ensure it doesn't fall below minumim. - Fixed bypassed checking of existing files on client for backup - Various logging fixes https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/uftp/uftp.hash | 2 +- package/uftp/uftp.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uftp/uftp.hash b/package/uftp/uftp.hash index aaebcad014..e47cba9394 100644 --- a/package/uftp/uftp.hash +++ b/package/uftp/uftp.hash @@ -1,3 +1,3 @@ # Locally computed sha256 -sha256 562f71ea5a24b615eb491f5744bad01e9c2e58244c1d6252d5ae98d320d308e0 uftp-5.0.tar.gz +sha256 f0435fbc8e9ffa125e05600cb6c7fc933d7d587f5bae41b257267be4f2ce0e61 uftp-5.0.1.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.txt diff --git a/package/uftp/uftp.mk b/package/uftp/uftp.mk index 1c36cb0ce6..ce865c20ec 100644 --- a/package/uftp/uftp.mk +++ b/package/uftp/uftp.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTP_VERSION = 5.0 +UFTP_VERSION = 5.0.1 UFTP_SITE = http://sourceforge.net/projects/uftp-multicast/files/source-tar UFTP_LICENSE = GPL-3.0+ UFTP_LICENSE_FILES = LICENSE.txt From peter at korsgaard.com Sun Oct 23 18:54:52 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 20:54:52 +0200 Subject: [Buildroot] [git commit] package/usbguard: bump to version 1.1.2 Message-ID: <20221023185600.B9B3986F1F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=343b049007a6dd4283d871b51475ce5d2484bf0c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/USBGuard/usbguard/blob/usbguard-1.1.2/CHANGELOG.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/usbguard/usbguard.hash | 4 ++-- package/usbguard/usbguard.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/usbguard/usbguard.hash b/package/usbguard/usbguard.hash index a69240b3f9..6c10dc9d3e 100644 --- a/package/usbguard/usbguard.hash +++ b/package/usbguard/usbguard.hash @@ -1,5 +1,5 @@ -# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.1/usbguard-1.1.1.tar.gz.sum -sha256 460ebfb4ffc5609739a202a3a1d9fda1c30de033b634845b8baa136352bfb432 usbguard-1.1.1.tar.gz +# From https://github.com/USBGuard/usbguard/releases/download/usbguard-1.1.2/usbguard-1.1.2.tar.gz.sum +sha256 dcf5c90f3f93030e04df1baeb8d388b678c40dd48b135ea12a7be7dee8944934 usbguard-1.1.2.tar.gz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index 26dc40d15b..e0c9b58221 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -4,7 +4,7 @@ # ################################################################################ -USBGUARD_VERSION = 1.1.1 +USBGUARD_VERSION = 1.1.2 USBGUARD_SITE = https://github.com/USBGuard/usbguard/releases/download/usbguard-$(USBGUARD_VERSION) USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 19:01:56 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 21:01:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/easy-rsa: bump to version 3.1.1 In-Reply-To: <20221021221133.13293-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:11:33 +0200") References: <20221021221133.13293-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t61hzv.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 19:01:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 21:01:49 +0200 Subject: [Buildroot] [git commit] package/easy-rsa: bump to version 3.1.1 Message-ID: <20221023190201.7F17786F74@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cd0916bf80b7e4a5369354c1e428bf78937d64f8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/OpenVPN/easy-rsa/releases/tag/v3.1.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/easy-rsa/easy-rsa.hash | 2 +- package/easy-rsa/easy-rsa.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/easy-rsa/easy-rsa.hash b/package/easy-rsa/easy-rsa.hash index e304c367fa..5be651bde0 100644 --- a/package/easy-rsa/easy-rsa.hash +++ b/package/easy-rsa/easy-rsa.hash @@ -1,5 +1,5 @@ # Locally computed: (after verifying gpg sig) -sha512 be2dedde19eaf923622da61db34ecb2e926b3f15a60a0c3d9858d3126dbe3b4af9c0f6674f964516572b50611ffd1d254952f27dc5de867bd7a67474c89be5f0 EasyRSA-3.1.0.tgz +sha512 8c8d1f4baf90475d4cce334d116b7f12b82687157796b25560600b5098769226ae2f60f02982c75266b625d66b465360ffa815260ad44850923e3fbc9ba8540a EasyRSA-3.1.1.tgz # Hash for license files sha256 7c4a4fc71745d93a87278801f1bca555562ca23f21e18293add64b9e6f6b7bf1 COPYING.md diff --git a/package/easy-rsa/easy-rsa.mk b/package/easy-rsa/easy-rsa.mk index 7c32c1d83d..4ea45506dd 100644 --- a/package/easy-rsa/easy-rsa.mk +++ b/package/easy-rsa/easy-rsa.mk @@ -4,7 +4,7 @@ # ################################################################################ -EASY_RSA_VERSION = 3.1.0 +EASY_RSA_VERSION = 3.1.1 EASY_RSA_SOURCE = EasyRSA-$(EASY_RSA_VERSION).tgz EASY_RSA_SITE = https://github.com/OpenVPN/easy-rsa/releases/download/v$(EASY_RSA_VERSION) EASY_RSA_LICENSE = GPL-2.0 From peter at korsgaard.com Sun Oct 23 20:28:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/libunistring: bump to version 1.1 In-Reply-To: <20221021220956.699772-1-paguilar@paguilar.org> (Pedro Aguilar's message of "Sat, 22 Oct 2022 00:09:56 +0200") References: <20221021220956.699772-1-paguilar@paguilar.org> Message-ID: <87r0yy1dz6.fsf@dell.be.48ers.dk> >>>>> "Pedro" == Pedro Aguilar writes: > https://savannah.gnu.org/projects/libunistring/ > Signed-off-by: Pedro Aguilar Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:28:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:53 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdmtx: bump to version 0.7.7 In-Reply-To: <20221021223630.122214-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:36:30 +0200") References: <20221021223630.122214-1-fontaine.fabrice@gmail.com> Message-ID: <87mt9m1dyy.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:29:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:29:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: bump to version 0.17 In-Reply-To: <20221021224357.129675-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 22 Oct 2022 00:43:57 +0200") References: <20221021224357.129675-1-fontaine.fabrice@gmail.com> Message-ID: <87ilka1dyk.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop patch (already in version) > https://lists.x.org/archives/xorg-announce/2022-October/003226.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 23 20:28:23 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:23 +0200 Subject: [Buildroot] [git commit] package/libdmtx: bump to version 0.7.7 Message-ID: <20221023202923.E31AC86F54@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8a08b862c6c22e7a7323efb82c8f3b3a662498f6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/dmtx/libdmtx/compare/v0.7.5...v0.7.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/libdmtx/libdmtx.hash | 2 +- package/libdmtx/libdmtx.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libdmtx/libdmtx.hash b/package/libdmtx/libdmtx.hash index 98eef9aeeb..8b176d737a 100644 --- a/package/libdmtx/libdmtx.hash +++ b/package/libdmtx/libdmtx.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 be0c5275695a732a5f434ded1fcc232aa63b1a6015c00044fe87f3a689b75f2e libdmtx-0.7.5.tar.gz +sha256 7aa62adcefdd6e24bdabeb82b3ce41a8d35f4a0c95ab0c4438206aecafd6e1a1 libdmtx-0.7.7.tar.gz sha256 fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79 LICENSE diff --git a/package/libdmtx/libdmtx.mk b/package/libdmtx/libdmtx.mk index 04e089f1f7..00d37fb94e 100644 --- a/package/libdmtx/libdmtx.mk +++ b/package/libdmtx/libdmtx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDMTX_VERSION = 0.7.5 +LIBDMTX_VERSION = 0.7.7 LIBDMTX_SITE = $(call github,dmtx,libdmtx,v$(LIBDMTX_VERSION)) LIBDMTX_LICENSE = BSD-2-Clause or Special Permission LIBDMTX_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 23 20:28:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:15 +0200 Subject: [Buildroot] [git commit] package/libunistring: bump to version 1.1 Message-ID: <20221023202923.D759386FA4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e78c580e2361f1d1055bc81e1a822d29c021b1b0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://savannah.gnu.org/projects/libunistring/ Signed-off-by: Pedro Aguilar Signed-off-by: Peter Korsgaard --- package/libunistring/libunistring.hash | 2 +- package/libunistring/libunistring.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libunistring/libunistring.hash b/package/libunistring/libunistring.hash index 81ffd4fb0c..8267d56327 100644 --- a/package/libunistring/libunistring.hash +++ b/package/libunistring/libunistring.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature # https://ftp.gnu.org/gnu/libunistring/libunistring-0.9.10.tar.xz.sig -sha256 5bab55b49f75d77ed26b257997e919b693f29fd4a1bc22e0e6e024c246c72741 libunistring-1.0.tar.xz +sha256 827c1eb9cb6e7c738b171745dac0888aa58c5924df2e59239318383de0729b98 libunistring-1.1.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c COPYING.LIB diff --git a/package/libunistring/libunistring.mk b/package/libunistring/libunistring.mk index a69eacd676..8d5b6f54ec 100644 --- a/package/libunistring/libunistring.mk +++ b/package/libunistring/libunistring.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBUNISTRING_VERSION = 1.0 +LIBUNISTRING_VERSION = 1.1 LIBUNISTRING_SITE = $(BR2_GNU_MIRROR)/libunistring LIBUNISTRING_SOURCE = libunistring-$(LIBUNISTRING_VERSION).tar.xz LIBUNISTRING_INSTALL_STAGING = YES From peter at korsgaard.com Sun Oct 23 20:28:32 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 23 Oct 2022 22:28:32 +0200 Subject: [Buildroot] [git commit] package/libpciaccess: bump to version 0.17 Message-ID: <20221023202923.F0FA386FA7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd6e79299fa480ceb8a6942898a45efaa4999f2e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch (already in version) https://lists.x.org/archives/xorg-announce/2022-October/003226.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- .../0001-pciaccess.pc.in-add-Libs.Private.patch | 28 ---------------------- package/libpciaccess/libpciaccess.hash | 7 ++---- package/libpciaccess/libpciaccess.mk | 4 ++-- 3 files changed, 4 insertions(+), 35 deletions(-) diff --git a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch b/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch deleted file mode 100644 index e520dd03d8..0000000000 --- a/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch +++ /dev/null @@ -1,28 +0,0 @@ -From e1f9fc0a11559c1200005c4bfe34cd217ec117b4 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 25 Oct 2019 19:03:32 +0200 -Subject: [PATCH] pciaccess.pc.in: add Libs.Private - -Add Libs.Private in pciaccess.pc.in so applications that wants to link -statically with pciaccess will know that they have to link with its -dependencies such as -lz - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/xorg/lib/libpciaccess/merge_requests/10] ---- - pciaccess.pc.in | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/pciaccess.pc.in b/pciaccess.pc.in -index 706c5f7..c2da3d9 100644 ---- a/pciaccess.pc.in -+++ b/pciaccess.pc.in -@@ -8,3 +8,4 @@ Description: Library providing generic access to the PCI bus and devices. - Version: @PACKAGE_VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lpciaccess -+Libs.Private: @PCIACCESS_LIBS@ --- -2.23.0 - diff --git a/package/libpciaccess/libpciaccess.hash b/package/libpciaccess/libpciaccess.hash index 2082be7d04..27ec59a452 100644 --- a/package/libpciaccess/libpciaccess.hash +++ b/package/libpciaccess/libpciaccess.hash @@ -1,7 +1,4 @@ -# From https://lists.x.org/archives/xorg-announce/2019-July/003014.html -md5 b34e2cbdd6aa8f9cc3fa613fd401a6d6 libpciaccess-0.16.tar.bz2 -sha1 ffaa13f2df5f822da1089b55223b217c142ef919 libpciaccess-0.16.tar.bz2 -sha256 214c9d0d884fdd7375ec8da8dcb91a8d3169f263294c9a90c575bf1938b9f489 libpciaccess-0.16.tar.bz2 -sha512 2f250048a270dfc0823d4bdd613aa272c58a80eaafd922850f56c4b6f7a45a263ed4cf521b52b49f04484ea44ebefb7407d079aa058318a5751ffb181e38fed1 libpciaccess-0.16.tar.bz2 +# From https://lists.x.org/archives/xorg-announce/2022-October/003226.html +sha512 8484605c66ef18c8d8a3e029a6d33e26fcaa450c1263790d89ac8b0a160ffb2dfceaa6140ac9ad7d8087283ecbec8ac801f757e44890d547c3cbecd2c922ca47 libpciaccess-0.17.tar.xz # Hash for license file: sha256 47012fd746980d1712ac4f3841ab6164bda1d2b84880760e45dbe1e1dc07f608 COPYING diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index d9a3a4e481..68d46b7f50 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBPCIACCESS_VERSION = 0.16 -LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.bz2 +LIBPCIACCESS_VERSION = 0.17 +LIBPCIACCESS_SOURCE = libpciaccess-$(LIBPCIACCESS_VERSION).tar.xz LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 23 20:40:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:40:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/libshout: bump to version 2.4.6 Message-ID: <20221023204044.23467-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) and so autoreconf - libvorbis is optional since https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS Signed-off-by: Fabrice Fontaine --- ...re.ac-add-an-option-to-disable-tools.patch | 51 ------------------- package/libshout/Config.in | 1 - package/libshout/libshout.hash | 4 +- package/libshout/libshout.mk | 13 +++-- 4 files changed, 11 insertions(+), 58 deletions(-) delete mode 100644 package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch diff --git a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch b/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch deleted file mode 100644 index 5c20db72e9..0000000000 --- a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 148b56bf894192cef6dd133715e295260b934a71 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 5 Mar 2021 15:50:32 +0100 -Subject: [PATCH] configure.ac: add an option to disable tools - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.xiph.org/xiph/icecast-libshout/-/issues/2331] ---- - Makefile.am | 5 ++++- - configure.ac | 5 +++++ - 2 files changed, 9 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index ea855cf..79241f1 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -3,10 +3,13 @@ - AUTOMAKE_OPTIONS = 1.6 foreign - ACLOCAL_AMFLAGS = -I m4 - --SUBDIRS = include src doc win32 tools -+SUBDIRS = include src doc win32 - if HAVE_EXAMPLES - SUBDIRS += examples - endif -+if HAVE_TOOLS -+SUBDIRS += tools -+endif - - EXTRA_DIST = INSTALL m4/shout.m4 m4/acx_pthread.m4 \ - m4/ogg.m4 m4/vorbis.m4 m4/xiph_compiler.m4 m4/xiph_net.m4 \ -diff --git a/configure.ac b/configure.ac -index 264b9b0..34f971c 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -100,6 +100,11 @@ AC_ARG_ENABLE([examples], - AS_HELP_STRING([--disable-examples],[Do not build example code])) - AM_CONDITIONAL([HAVE_EXAMPLES],[test "${enable_examples}" != "no"]) - -+dnl Allow tools not to be build -+AC_ARG_ENABLE([tools], -+ AS_HELP_STRING([--disable-tools],[Do not build tools])) -+AM_CONDITIONAL([HAVE_TOOLS],[test "${enable_tools}" != "no"]) -+ - dnl Module checks - XIPH_NET - --- -2.30.0 - diff --git a/package/libshout/Config.in b/package/libshout/Config.in index f8749b9183..6a7560b349 100644 --- a/package/libshout/Config.in +++ b/package/libshout/Config.in @@ -1,7 +1,6 @@ config BR2_PACKAGE_LIBSHOUT bool "libshout" select BR2_PACKAGE_LIBOGG - select BR2_PACKAGE_LIBVORBIS help Libshout is a library for communicating with and sending data to an icecast server. It handles the socket connection, the diff --git a/package/libshout/libshout.hash b/package/libshout/libshout.hash index ae43e0a9c8..d562b5231b 100644 --- a/package/libshout/libshout.hash +++ b/package/libshout/libshout.hash @@ -1,8 +1,8 @@ # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA512SUMS -sha512 290844185da16961f03434d3e341573dd6cb0139e5fa81902903021b641382d2629302d7c356bc591b35656754e07f4e44a8d9e782e092b17a051b9ae8f54341 libshout-2.4.5.tar.gz +sha512 e8478cdbf9a27674c16a7b620d1576f2e31a47262b8e29b314d0f46d4e5be24b9a29790b7b226f48939bc34cacf5734fae0aa5686c7ed5879cdbd827ff8e0339 libshout-2.4.6.tar.gz # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA256SUMS -sha256 d9e568668a673994ebe3f1eb5f2bee06e3236a5db92b8d0c487e1c0f886a6890 libshout-2.4.5.tar.gz +sha256 39cbd4f0efdfddc9755d88217e47f8f2d7108fa767f9d58a2ba26a16d8f7c910 libshout-2.4.6.tar.gz # Hash for license file sha256 7a4436f9ec37603356791c87de3bc444989befd2682d29efb3d97604e04c1852 COPYING diff --git a/package/libshout/libshout.mk b/package/libshout/libshout.mk index 4afb762de6..be63786795 100644 --- a/package/libshout/libshout.mk +++ b/package/libshout/libshout.mk @@ -4,14 +4,12 @@ # ################################################################################ -LIBSHOUT_VERSION = 2.4.5 +LIBSHOUT_VERSION = 2.4.6 LIBSHOUT_SITE = https://downloads.xiph.org/releases/libshout LIBSHOUT_LICENSE = LGPL-2.0+ LIBSHOUT_LICENSE_FILES = COPYING LIBSHOUT_INSTALL_STAGING = YES -LIBSHOUT_DEPENDENCIES = host-pkgconf libogg libvorbis -# We're patching configure.ac -LIBSHOUT_AUTORECONF = YES +LIBSHOUT_DEPENDENCIES = host-pkgconf libogg LIBSHOUT_CONF_OPTS = \ --disable-examples \ --disable-tools @@ -23,6 +21,13 @@ else LIBSHOUT_CONF_OPTS += --disable-theora endif +ifeq ($(BR2_PACKAGE_LIBVORBIS),y) +LIBSHOUT_CONF_OPTS += --enable-vorbis +LIBSHOUT_DEPENDENCIES += libvorbis +else +LIBSHOUT_CONF_OPTS += --disable-vorbis +endif + ifeq ($(BR2_PACKAGE_SPEEX),y) LIBSHOUT_CONF_OPTS += --enable-speex LIBSHOUT_DEPENDENCIES += speex -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 20:47:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:47:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpng: bump to version 1.6.38 Message-ID: <20221023204719.31316-1-fontaine.fabrice@gmail.com> Version 1.6.38 [September 14, 2022] Added configurations and scripts for continuous integration. Fixed various errors in the handling of tRNS, hIST and eXIf. Implemented many stability improvements across all platforms. Updated the internal documentation. Update hash of LICENSE file (update in year with https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES Signed-off-by: Fabrice Fontaine --- package/libpng/libpng.hash | 10 +++++----- package/libpng/libpng.mk | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libpng/libpng.hash b/package/libpng/libpng.hash index b57b1251a0..34b0a8a8b6 100644 --- a/package/libpng/libpng.hash +++ b/package/libpng/libpng.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.37/ -md5 015e8e15db1eecde5f2eb9eb5b6e59e9 libpng-1.6.37.tar.xz -sha1 3ab93fabbf4c27e1c4724371df408d9a1bd3f656 libpng-1.6.37.tar.xz +# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.38/ +md5 122e6b7837811698563083b352bc8ca2 libpng-1.6.38.tar.xz +sha1 60960ed110094843e5efa221df6a7d21614a4dba libpng-1.6.38.tar.xz # Locally computed: -sha256 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca libpng-1.6.37.tar.xz -sha256 bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b LICENSE +sha256 b3683e8b8111ebf6f1ac004ebb6b0c975cd310ec469d98364388e9cedbfa68be libpng-1.6.38.tar.xz +sha256 dfe5a536b0e5a531f844fb9c101a3089aca60772a503893b8e15f9457e369960 LICENSE diff --git a/package/libpng/libpng.mk b/package/libpng/libpng.mk index e4e629bbb5..43b4f373f1 100644 --- a/package/libpng/libpng.mk +++ b/package/libpng/libpng.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPNG_VERSION = 1.6.37 +LIBPNG_VERSION = 1.6.38 LIBPNG_SERIES = 16 LIBPNG_SOURCE = libpng-$(LIBPNG_VERSION).tar.xz LIBPNG_SITE = http://downloads.sourceforge.net/project/libpng/libpng$(LIBPNG_SERIES)/$(LIBPNG_VERSION) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 20:54:40 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 22:54:40 +0200 Subject: [Buildroot] [PATCH 1/1] package/libminiupnpc: bump to version 2.2.4 Message-ID: <20221023205440.36753-1-fontaine.fabrice@gmail.com> 2022/02/20: upnpc: use of @ to replace local lan address 2021/11/09: python module : Allow to specify the root description url - Drop patch (already in version) - Update hash of LICENSE file (license "refined" for github with https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz Signed-off-by: Fabrice Fontaine --- ...akeLists-txt-fix-install-for-headers.patch | 43 ------------------- package/libminiupnpc/libminiupnpc.hash | 4 +- package/libminiupnpc/libminiupnpc.mk | 2 +- 3 files changed, 3 insertions(+), 46 deletions(-) delete mode 100644 package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch diff --git a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch b/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch deleted file mode 100644 index 2e4c8a69e6..0000000000 --- a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f82b0563a72e33800f5918ead68c41bcda1fd4c1 Mon Sep 17 00:00:00 2001 -From: heitbaum -Date: Fri, 1 Oct 2021 00:00:27 +1000 -Subject: [PATCH] miniupnpc/CMakeLists.txt: fix install for headers - -[Retrieved from: -https://github.com/miniupnp/miniupnp/commit/f82b0563a72e33800f5918ead68c41bcda1fd4c1] -Signed-off-by: Fabrice Fontaine ---- - miniupnpc/CMakeLists.txt | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 0553eeb3..6b0904c0 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -221,16 +221,16 @@ endif () - - if (NOT UPNPC_NO_INSTALL) - install (FILES -- miniupnpc.h -- miniwget.h -- upnpcommands.h -- igd_desc_parse.h -- upnpreplyparse.h -- upnperrors.h -- upnpdev.h -- miniupnpctypes.h -- portlistingparse.h -- miniupnpc_declspec.h -+ include/miniupnpc.h -+ include/miniwget.h -+ include/upnpcommands.h -+ include/igd_desc_parse.h -+ include/upnpreplyparse.h -+ include/upnperrors.h -+ include/upnpdev.h -+ include/miniupnpctypes.h -+ include/portlistingparse.h -+ include/miniupnpc_declspec.h - DESTINATION include/miniupnpc - ) - diff --git a/package/libminiupnpc/libminiupnpc.hash b/package/libminiupnpc/libminiupnpc.hash index 4714dd6f48..5dca8dd6cf 100644 --- a/package/libminiupnpc/libminiupnpc.hash +++ b/package/libminiupnpc/libminiupnpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 dce41b4a4f08521c53a0ab163ad2007d18b5e1aa173ea5803bd47a1be3159c24 miniupnpc-2.2.3.tar.gz -sha256 90bb92bf524970569296022fea562c85a4ec4d99a16f3aef2144d13d7087b631 LICENSE +sha256 481a5e4aede64e9ef29895b218836c3608d973e77a35b4f228ab1f3629412c4b miniupnpc-2.2.4.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/libminiupnpc/libminiupnpc.mk b/package/libminiupnpc/libminiupnpc.mk index f3661396ca..9dc5c719a9 100644 --- a/package/libminiupnpc/libminiupnpc.mk +++ b/package/libminiupnpc/libminiupnpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMINIUPNPC_VERSION = 2.2.3 +LIBMINIUPNPC_VERSION = 2.2.4 LIBMINIUPNPC_SOURCE = miniupnpc-$(LIBMINIUPNPC_VERSION).tar.gz LIBMINIUPNPC_SITE = http://miniupnp.free.fr/files LIBMINIUPNPC_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:09:51 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:09:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/lensfun: bump to version 0.3.3 Message-ID: <20221023210951.48256-1-fontaine.fabrice@gmail.com> Switch to new upstream site to get latest release https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ Signed-off-by: Fabrice Fontaine --- package/lensfun/Config.in | 2 +- package/lensfun/lensfun.hash | 5 +---- package/lensfun/lensfun.mk | 4 ++-- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/package/lensfun/Config.in b/package/lensfun/Config.in index 7ec49020ee..7c424f5351 100644 --- a/package/lensfun/Config.in +++ b/package/lensfun/Config.in @@ -11,7 +11,7 @@ config BR2_PACKAGE_LENSFUN actually use Lensfun to process your images you need an image editing application with Lensfun support. - http://lensfun.sourceforge.net + https://lensfun.github.io if BR2_PACKAGE_LENSFUN diff --git a/package/lensfun/lensfun.hash b/package/lensfun/lensfun.hash index cb56f32b56..f03d0b54ae 100644 --- a/package/lensfun/lensfun.hash +++ b/package/lensfun/lensfun.hash @@ -1,7 +1,4 @@ -# From https://sourceforge.net/projects/lensfun/files/0.3.2 -sha1 1d978b15aa7304d66a4931fa37ca9f8f89396c16 lensfun-0.3.2.tar.gz -md5 247e59a0812ec451f6cd0d20b3379cb5 lensfun-0.3.2.tar.gz # Locally calculated -sha256 ae8bcad46614ca47f5bda65b00af4a257a9564a61725df9c74cb260da544d331 lensfun-0.3.2.tar.gz +sha256 57ba5a0377f24948972339e18be946af12eda22b7c707eb0ddd26586370f6765 lensfun-0.3.3.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 docs/gpl-3.0.txt sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c docs/lgpl-3.0.txt diff --git a/package/lensfun/lensfun.mk b/package/lensfun/lensfun.mk index 9258409f57..f82ed44495 100644 --- a/package/lensfun/lensfun.mk +++ b/package/lensfun/lensfun.mk @@ -4,8 +4,8 @@ # ################################################################################ -LENSFUN_VERSION = 0.3.2 -LENSFUN_SITE = https://sourceforge.net/projects/lensfun/files/$(LENSFUN_VERSION) +LENSFUN_VERSION = 0.3.3 +LENSFUN_SITE = $(call github,lensfun,lensfun,v$(LENSFUN_VERSION)) LENSFUN_LICENSE = LGPL-3.0+ (libraries), GPL-3.0+ (programs) LENSFUN_LICENSE_FILES = docs/gpl-3.0.txt docs/lgpl-3.0.txt LENSFUN_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:29:56 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:29:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: bump to version 2.1.8 Message-ID: <20221023212956.60845-1-fontaine.fabrice@gmail.com> 2.1.8 (as of August 5th, 2022) ------------------------------ - Add support for --bounceback to perform a repsonsiveness test (see man page for other options) - add support for working loads with --bounceback - Fix to wait_tick with Mac OS X - Various python pyflows commits - add support for client side tcp-write-time histograms and mean/min/max - add support for human readable dscp or -T values (see man page) - udp_accept no longer accepts packets from a previous run as a new connection, this can occur with long network delays - multiple isoch bug fixes for both UDP and TCP - isoch server provides mean/min/max/stdev for both frames and packets - UDP max MTU discovery, requires configure.ac will support --enable-discover-defaultlen prior to compile - Drop first patch (already in version) - Drop second patch (not needed since https://sourceforge.net/p/iperf2/code/ci/de5cb9954617309eecb8ae7d24b14e6b1e0c11eb) https://sourceforge.net/projects/iperf2/files/ Signed-off-by: Fabrice Fontaine --- .../iperf/0001-Fix-build-with-musl-libc.patch | 67 ------------------- .../0002-compat-gettcpinfo.c-fix-build.patch | 34 ---------- package/iperf/iperf.hash | 4 +- package/iperf/iperf.mk | 2 +- 4 files changed, 3 insertions(+), 104 deletions(-) delete mode 100644 package/iperf/0001-Fix-build-with-musl-libc.patch delete mode 100644 package/iperf/0002-compat-gettcpinfo.c-fix-build.patch diff --git a/package/iperf/0001-Fix-build-with-musl-libc.patch b/package/iperf/0001-Fix-build-with-musl-libc.patch deleted file mode 100644 index 269079ee1e..0000000000 --- a/package/iperf/0001-Fix-build-with-musl-libc.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 6766ab322a9eb8c73f8276be9cdea356eb124de0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 11 Nov 2021 07:58:10 +0200 -Subject: [PATCH] Fix build with musl libc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -musl libc defines its own struct ethhdr that conflicts with the kernel -define one. The kernel headers provide a way to suppress its struct -ethhdr. For that to work the libc headers must precede the kernel. Move -the kernel linux/if_tun.h include below libc net/ethernet.h. That fixes -the following build failure: - -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/net/ethernet.h:10, - from ../include/headers.h:117, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/netinet/if_ether.h:116:8: error: redefinition of ?struct ethhdr? - 116 | struct ethhdr { - | ^~~~~~ -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_tun.h:20, - from ../include/headers.h:110, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_ether.h:148:8: note: originally defined here - 148 | struct ethhdr { - | ^~~~~~ - -Fixes bug #157. - -Signed-off-by: Baruch Siach ---- -Upstream status: sent to Robert McMahon - - include/headers.h | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/include/headers.h b/include/headers.h -index 00e0ea0dba42..887490475381 100644 ---- a/include/headers.h -+++ b/include/headers.h -@@ -106,11 +106,6 @@ typedef bool _Bool; - #include - #endif - --#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) --#include --#include --#endif -- - - // AF_PACKET HEADERS - #if defined(HAVE_LINUX_FILTER_H) && defined(HAVE_AF_PACKET) -@@ -146,6 +141,11 @@ typedef bool _Bool; - #define IPV6HDRLEN 40 - #endif // HAVE_AF_PACKET - -+#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) -+#include -+#include -+#endif -+ - #ifdef WIN32 - - /* Windows config file */ --- -2.33.0 - diff --git a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch b/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch deleted file mode 100644 index 786c7d1873..0000000000 --- a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a3339604bafa99f66e12687efc2c50d2e2df1276 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 12 Dec 2021 20:03:04 +0100 -Subject: [PATCH] compat/gettcpinfo.c: fix build - -Fix the following build failure raised since commit -c8f861a0a07b0606a581f2658c71959ad9417923: - -gettcpinfo.c: In function 'gettcpinfo': -gettcpinfo.c:101:42: error: expected declaration or statement at end of input - 101 | inline void gettcpinfo (int sock, struct ReportStruct *sample) { - | ^~~~~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/073e070478f0cda34784af96bb3a802c3aac8f72 - -Signed-off-by: Fabrice Fontaine ---- - compat/gettcpinfo.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/compat/gettcpinfo.c b/compat/gettcpinfo.c -index 4e11e2a..1d3791a 100644 ---- a/compat/gettcpinfo.c -+++ b/compat/gettcpinfo.c -@@ -99,4 +99,5 @@ inline void gettcpinfo (SOCKET sock, struct ReportStruct *sample) { - }; - #else - inline void gettcpinfo (int sock, struct ReportStruct *sample) { -+}; - #endif --- -2.33.0 - diff --git a/package/iperf/iperf.hash b/package/iperf/iperf.hash index 2e1f433dc7..34218bcf3b 100644 --- a/package/iperf/iperf.hash +++ b/package/iperf/iperf.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/iperf2/files/ -sha1 41bd049625cbecda2bf5b6a6cc12a6c5baec549b iperf-2.1.6.tar.gz +sha1 7725efffc6ef46fe5247ee326c39e5fa2eadf1eb iperf-2.1.8.tar.gz # Locally computed: -sha256 4a43e44439b95622aebeee55754a17d1c94076032e90620dfc1ab9908cb9e080 iperf-2.1.6.tar.gz +sha256 8e2cf2fbc9d0d4d1cf9d109b1e328459f9622993dc9a4c5a7dc8a2088fb7beaf iperf-2.1.8.tar.gz sha256 5f9f5c4feca3347c3b3c0ada8b16b4e6b698aac4e6f016a24adf61a5915336d1 COPYING diff --git a/package/iperf/iperf.mk b/package/iperf/iperf.mk index f999ff4ac2..47944880a3 100644 --- a/package/iperf/iperf.mk +++ b/package/iperf/iperf.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF_VERSION = 2.1.6 +IPERF_VERSION = 2.1.8 IPERF_SITE = http://downloads.sourceforge.net/project/iperf2 IPERF_LICENSE = MIT-like IPERF_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 23 21:42:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:42:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf3: bump to version 3.12 Message-ID: <20221023214220.70941-1-fontaine.fabrice@gmail.com> Update hash of LICENSE file (update in year with https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) https://github.com/esnet/iperf/blob/3.12/RELNOTES.md Signed-off-by: Fabrice Fontaine --- package/iperf3/iperf3.hash | 6 +++--- package/iperf3/iperf3.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/iperf3/iperf3.hash b/package/iperf3/iperf3.hash index c96d68cd99..15c75b6dac 100644 --- a/package/iperf3/iperf3.hash +++ b/package/iperf3/iperf3.hash @@ -1,4 +1,4 @@ -# From https://downloads.es.net/pub/iperf/iperf-3.10.1.tar.gz.sha256 -sha256 03bc9760cc54a245191d46bfc8edaf8a4750f0e87abca6764486972044d6715a iperf-3.10.1.tar.gz +# From https://downloads.es.net/pub/iperf/iperf-3.12.tar.gz.sha256 +sha256 72034ecfb6a7d6d67e384e19fb6efff3236ca4f7ed4c518d7db649c447e1ffd6 iperf-3.12.tar.gz # Locally computed -sha256 0e1cb1921904626f0d3e86cacc0e28333140f0f9957267cff0b9d185645743ed LICENSE +sha256 a5c2e3d799f2835156e565a3de4fad33d32ed289cdc9e414dfaf75719fd12ef9 LICENSE diff --git a/package/iperf3/iperf3.mk b/package/iperf3/iperf3.mk index 8c57c61fce..9041c86575 100644 --- a/package/iperf3/iperf3.mk +++ b/package/iperf3/iperf3.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF3_VERSION = 3.10.1 +IPERF3_VERSION = 3.12 IPERF3_SITE = https://downloads.es.net/pub/iperf IPERF3_SOURCE = iperf-$(IPERF3_VERSION).tar.gz IPERF3_LICENSE = BSD-3-Clause, BSD-2-Clause, MIT -- 2.35.1 From nolange79 at gmail.com Sun Oct 23 21:47:22 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Sun, 23 Oct 2022 23:47:22 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> Message-ID: Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > While the /var factory seems to be working in most cases, there have > been suggestions that it may be slightly and subtely borken in some > (rare? edge?) cases, especially about symlinks. Had to dig up an old post of mine (not the only one touching on that), some issues are: - it kills previous files in /usr/share/factory/var - it doesn't handle symlinks (just think of /var already containing a symlink into that factory), especially relative ones. - it has sideeffects with tmpfile .confs that are ordered before and touch /var - it has sideeffects with other PRE_CMD_HOOKS touching /var (Post is from mid 2020, so forgive me if my memory is fuzzy, but I had already practical problems with atleast the last 2 of those). To me this is just not a robust solution > > An other solution is to pre-populate /var at build time, by way of > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > runtime. > > This is slightly accrobatic, though, and requires a few hoops: > - first, we create a tmpfs > - there, we create three directories: > - the first to bind-mount /var as it is, i.e. read-only > - the second as the read-write upper for the overlayfs > - the third as the "working area" for the overlays ..and we depend on overlayfs > > This is done with two systemd units: > - rootfs-bindmount-var.service: prepares up to bind-mounting /var into > the tmpfs > - var.mount: a mount unit which actually mounts the overlayfs. > > Users who want to provide an actual storage to keep /var across reboots, > will have to provide their own mount units and make it RequiredBy and > BoundBy our var.mount unit. > > Systemd units courtesy Norbert, with slight tweaks and cleanups. Yeah, Im not fine with the tweaks to drop the symlink /usr/lib/systemd/system/var.mount -> ../var.mount (and the added intstall section) First in the same local-fs "target" you could mount /etc, making this a complicated hidden issue, I don't know when systemd reloads, I believe only after that target. Second, this should be enabled by default, and in a way even when /etc is borked/not ready. If a user really wants to disable the mount, he can mask it. > > Signed-off-by: Yann E. MORIN > Cc: Norbert Lange > Cc: Romain Naour > Cc: Je?re?my Rosen > --- > .../{ => factory}/var.mount | 0 > .../overlayfs/rootfs-bindmount-var.service | 21 ++++++++++++++++ > .../skeleton-init-systemd/overlayfs/var.mount | 15 ++++++++++++ > .../skeleton-init-systemd.mk | 20 +++++++++++++--- > system/Config.in | 24 +++++++++++++------ > 5 files changed, 70 insertions(+), 10 deletions(-) > rename package/skeleton-init-systemd/{ => factory}/var.mount (100%) > create mode 100644 package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > create mode 100644 package/skeleton-init-systemd/overlayfs/var.mount > > diff --git a/package/skeleton-init-systemd/var.mount b/package/skeleton-init-systemd/factory/var.mount > similarity index 100% > rename from package/skeleton-init-systemd/var.mount > rename to package/skeleton-init-systemd/factory/var.mount > diff --git a/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > new file mode 100644 > index 0000000000..e412a56c49 > --- /dev/null > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > @@ -0,0 +1,21 @@ > +[Unit] > +Description=Bind-mount variable storage (/var) > +Documentation=man:file-hierarchy(7) > +ConditionPathIsSymbolicLink=!/var > +# ConditionPathIsReadWrite=!/var > +DefaultDependencies=no > +Conflicts=umount.target > +Before=local-fs.target umount.target > +After=local-fs-pre.target A am actually considering changing that to: Before=local-fs-pre.target umount.target # After=local-fs-pre.target It does not depend an anything, so no technical reason to order it after anything. And it is technically a preparation for the actual local-fs.target. > + > +[Service] > +Type=oneshot > +RemainAfterExit=yes > +ExecStartPre=-/bin/mkdir /run/varoverlay > +ExecStartPre=/bin/mount --make-private -n -t tmpfs tmpfs_root_ovl /run/varoverlay > +ExecStartPre=/bin/mkdir /run/varoverlay/lower /run/varoverlay/upper /run/varoverlay/work > +ExecStart=/bin/mount --make-private -n --bind /var /run/varoverlay/lower > + > +ExecStop=/bin/umount -n /run/varoverlay/lower > +ExecStopPost=/bin/umount -n /run/varoverlay > +ExecStopPost=/bin/rmdir /run/varoverlay > diff --git a/package/skeleton-init-systemd/overlayfs/var.mount b/package/skeleton-init-systemd/overlayfs/var.mount > new file mode 100644 > index 0000000000..fab223c27b > --- /dev/null > +++ b/package/skeleton-init-systemd/overlayfs/var.mount > @@ -0,0 +1,15 @@ > +[Unit] > +Description=variable storage (/var) > +Documentation=man:file-hierarchy(7) > +ConditionPathIsSymbolicLink=!/var > +After=rootfs-bindmount-var.service > +BindsTo=rootfs-bindmount-var.service > + > +[Mount] > +What=overlay_var > +Where=/var > +Type=overlay > +Options=lowerdir=/run/varoverlay/lower,upperdir=/run/varoverlay/upper,workdir=/run/varoverlay/work,redirect_dir=on,index=on,xino=on > + > +[Install] > +WantedBy=local-fs.target See above. > diff --git a/package/skeleton-init-systemd/skeleton-init-systemd.mk b/package/skeleton-init-systemd/skeleton-init-systemd.mk > index 69991265a5..07a4180db0 100644 > --- a/package/skeleton-init-systemd/skeleton-init-systemd.mk > +++ b/package/skeleton-init-systemd/skeleton-init-systemd.mk > @@ -33,7 +33,7 @@ define SKELETON_INIT_SYSTEMD_ROOT_RO_OR_RW > endef > > ifeq ($(BR2_INIT_SYSTEMD_VAR_FACTORY),y) > -define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY > rm -rf $(TARGET_DIR)/usr/share/factory/var > mv $(TARGET_DIR)/var $(TARGET_DIR)/usr/share/factory/var > mkdir -p $(TARGET_DIR)/var > @@ -52,11 +52,25 @@ define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > || exit 1; \ > fi; \ > done >$(TARGET_DIR)/usr/lib/tmpfiles.d/buildroot-factory.conf > - $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/var.mount \ > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/factory/var.mount \ > $(TARGET_DIR)/usr/lib/systemd/system/var.mount > endef > -SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR > +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_FACTORY > endif # BR2_INIT_SYSTEMD_VAR_FACTORY > + > +ifeq ($(BR2_INIT_SYSTEMD_VAR_OVERLAYFS),y) > +define SKELETON_INIT_SYSTEMD_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_OVERLAY_FS) > +endef > +define SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/var.mount \ > + $(TARGET_DIR)/usr/lib/systemd/system/var.mount > + $(INSTALL) -D -m 0644 $(SKELETON_INIT_SYSTEMD_PKGDIR)/overlayfs/rootfs-bindmount-var.service \ > + $(TARGET_DIR)/usr/lib/systemd/system/rootfs-bindmount-var.service > +endef > +SKELETON_INIT_SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SKELETON_INIT_SYSTEMD_PRE_ROOTFS_VAR_OVERLAYFS > +endif # BR2_INIT_SYSTEMD_VAR_OVERLAYFS > + > endif # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW > > ifeq ($(BR2_INIT_SYSTEMD_POPULATE_TMPFILES),y) > diff --git a/system/Config.in b/system/Config.in > index 074fda509c..0c064b8211 100644 > --- a/system/Config.in > +++ b/system/Config.in > @@ -164,6 +164,14 @@ choice > Select how Buildroot provides a read-write /var when the > rootfs is not remounted read-write. > > + Note: Buildroot uses a tmpfs, either as a mount point or as > + the upper of an overlayfs, so as to at least make the system > + bootable out of the box; mounting a filesystem from actual > + storage is left to the integration, as it is too specific and > + may need preparatory work like partitionning a device and/or > + formatting a filesystem first, which falls out of the scope > + of Buildroot. > + > config BR2_INIT_SYSTEMD_VAR_FACTORY > bool "build a factory to populate a tmpfs" > help > @@ -176,17 +184,19 @@ config BR2_INIT_SYSTEMD_VAR_FACTORY > It probably does not play very well with triggering a call > to systemd-tmpfiles at build time (below). > > - Note: Buildroot mounts a tmpfs on /var to at least make the > - system bootable out of the box; mounting a filesystem from > - actual storage is left to the integration, as it is too > - specific and may need preparatory work like partitionning a > - device and/or formatting a filesystem first, so that falls > - out of the scope of Buildroot. > - > To use persistent storage, provide a systemd dropin for the > var.mount unit, that overrides the What and Type, and possibly > the Options and After, fields. > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > + bool "mount an overlayfs backed by a tmpfs" > + help > + Mount an overlayfs on /var, with the upper as a tmpfs. > + > + To use a persistent storage, provide your own systemd unit(s) > + that eventually mount that persistent storage on > + /run/varoverlay/upper/ perhaps pull in or depend on overlayfs here > + > config BR2_INIT_SYSTEMD_VAR_CUSTOM > bool "something else" > help > -- > 2.25.1 > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. > > This message and its attachments may contain confidential or privileged information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. > Thank you. > Generally the unit and directory names could be more logical, and for allowing the user to specify a custom mount by reading an EnvironmentFile in the rootfs-bindmount-var unit. Regards, Norbert [1] http://lists.busybox.net/pipermail/buildroot/2020-July/287016.html PS. Planning to add some more comments next week, should find dome time here, huge commit msgs to get through. From fontaine.fabrice at gmail.com Sun Oct 23 21:49:02 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 23 Oct 2022 23:49:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: bump to version 5.43 Message-ID: <20221023214902.85185-1-fontaine.fabrice@gmail.com> Update hash of src/vasprintf.c (typo fixed with https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) https://github.com/file/file/blob/FILE5_43/ChangeLog Signed-off-by: Fabrice Fontaine --- package/file/file.hash | 6 +++--- package/file/file.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/file/file.hash b/package/file/file.hash index 33875776eb..49fa9e1e1b 100644 --- a/package/file/file.hash +++ b/package/file/file.hash @@ -1,7 +1,7 @@ # Locally calculated after verifying signature -# ftp://ftp.astron.com/pub/file/file-5.41.tar.gz.asc +# ftp://ftp.astron.com/pub/file/file-5.43.tar.gz.asc # using key BE04995BA8F90ED0C0C176C471112AB16CB33B3A -sha256 13e532c7b364f7d57e23dfeea3147103150cb90593a57af86c10e4f6e411603f file-5.41.tar.gz +sha256 8c8015e91ae0e8d0321d94c78239892ef9dbc70c4ade0008c0e95894abfb1991 file-5.43.tar.gz sha256 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274 COPYING sha256 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462 src/mygetopt.h -sha256 c4fa92d6504b88484a12140fe3e24b9b29b0112717f94b1ff4205d54828b1c70 src/vasprintf.c +sha256 cc3d8704489d08eaefcaee8c639cc6436c6f0f6b2b03986d3ba7521a1a1d2fc9 src/vasprintf.c diff --git a/package/file/file.mk b/package/file/file.mk index c06975460f..9b751e2696 100644 --- a/package/file/file.mk +++ b/package/file/file.mk @@ -4,7 +4,7 @@ # ################################################################################ -FILE_VERSION = 5.41 +FILE_VERSION = 5.43 FILE_SITE = ftp://ftp.astron.com/pub/file FILE_LICENSE = BSD-2-Clause, BSD-4-Clause (one file), BSD-3-Clause (one file) FILE_LICENSE_FILES = COPYING src/mygetopt.h src/vasprintf.c -- 2.35.1 From giulio.benetti at benettiengineering.com Sun Oct 23 22:14:25 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 24 Oct 2022 00:14:25 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc Message-ID: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> Add local patch(pending upstream[0]) to fix build failure with PowerPc due to a package re-defition of get_ra() that is only defined in Linux PowerPc implementation. [0]: https://github.com/lwfinger/rtl8723bu/pull/192 Fixes: http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ Signed-off-by: Giulio Benetti --- ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch diff --git a/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch new file mode 100644 index 0000000000..2665a6d031 --- /dev/null +++ b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch @@ -0,0 +1,46 @@ +From dde7bddfddddb7212f2d9671391e2096d770c449 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Sun, 23 Oct 2022 22:57:41 +0200 +Subject: [PATCH] Fix build failure on PowerPc architecture + +In PowerPc Linux only get_ra() exists[0] and conflicts with local get_ra() +that has a completely different purpose. So let's rename local get_ra() +to wifi_get_ra() to make it different from Linux's get_ra(). + +[0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/include/asm/disassemble.h#n49 + +Signed-off-by: Giulio Benetti +--- + hal/rtl8723bu_recv.c | 2 +- + include/wifi.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/hal/rtl8723bu_recv.c b/hal/rtl8723bu_recv.c +index a2fc82b..39e5044 100644 +--- a/hal/rtl8723bu_recv.c ++++ b/hal/rtl8723bu_recv.c +@@ -288,7 +288,7 @@ void update_recvframe_phyinfo( + !pattrib->icv_err && !pattrib->crc_err && + _rtw_memcmp(get_hdr_bssid(wlanhdr), get_bssid(&padapter->mlmepriv), ETH_ALEN)); + +- pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); ++ pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(wifi_get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); + + pkt_info.bPacketBeacon = pkt_info.bPacketMatchBSSID && (GetFrameSubType(wlanhdr) == WIFI_BEACON); + sa = get_ta(wlanhdr); +diff --git a/include/wifi.h b/include/wifi.h +index 5dc32eb..23578cc 100644 +--- a/include/wifi.h ++++ b/include/wifi.h +@@ -373,7 +373,7 @@ __inline static int IS_MCAST(unsigned char *da) + return _FALSE; + } + +-__inline static unsigned char * get_ra(unsigned char *pframe) ++__inline static unsigned char * wifi_get_ra(unsigned char *pframe) + { + unsigned char *ra; + ra = GetAddr1Ptr(pframe); +-- +2.34.1 + -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 23 22:54:02 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 23 Oct 2022 18:54:02 -0400 Subject: [Buildroot] [PATCH v3 5/5] package/cog: bump to version 0.16.0 In-Reply-To: <20221006095833.1116173-6-aperez@igalia.com> References: <20221004133057.2003750-1-aperez@igalia.com> <20221006095833.1116173-1-aperez@igalia.com> <20221006095833.1116173-6-aperez@igalia.com> Message-ID: On Thu, Oct 6, 2022 at 6:00 AM Adrian Perez de Castro wrote: > > This new version includes support for setting proxy options and gamepad > support. Release notes: > > https://wpewebkit.org/release/cog-0.16.0.html > > This imports a small patch to properly pick libdrm compiler flags, > fetched from the upstream repository. > > Signed-off-by: Adrian Perez de Castro Tested-by: James Hilliard > --- > ...m-dependency-when-protocols-are-used.patch | 36 ++++++++++++++++++ > package/cog/cog.hash | 8 ++-- > package/cog/cog.mk | 37 ++++++++++--------- > 3 files changed, 60 insertions(+), 21 deletions(-) > create mode 100644 package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > > diff --git a/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > new file mode 100644 > index 0000000000..44e555c121 > --- /dev/null > +++ b/package/cog/0001-wl-Fix-libdrm-dependency-when-protocols-are-used.patch > @@ -0,0 +1,36 @@ > +From 9a1982c563e218b7695e6a174c8230d3b063eb27 Mon Sep 17 00:00:00 2001 > +From: Gary Bisson > +Date: Thu, 6 Oct 2022 09:04:22 +0200 > +Subject: [PATCH] wl: Fix libdrm dependency when protocols are used > + > +As the comment says, cog-platform-wl.c needs drm_fourcc.h to build > +properly when wayland_weston_direct_display is enabled. > + > +However, libdrm.pc doesn't specify "include/libdrm" as part of its > +includedir but whether in its cflags. So use the compile_args dep > +instead of includes to fix the build failure. > + > +Signed-off-by: Gary Bisson > +(cherry picked from commit 32c1d9533bcdc22cbc01d02bf2e6ac0d4bda2dc2) > +Signed-off-by: Adrian Perez de Castro > +[Upstream status: https://github.com/Igalia/cog/pull/501] > +--- > + platform/wayland/meson.build | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/platform/wayland/meson.build b/platform/wayland/meson.build > +index f1e18ec..31e4460 100644 > +--- a/platform/wayland/meson.build > ++++ b/platform/wayland/meson.build > +@@ -67,7 +67,7 @@ if wayland_platform_weston_protocols.length() > 0 > + > + # The code uses definitions from the drm_fourcc.h header, but does not > + # need to link the library; libdrm here is only a build-time dependency. > +- wayland_platform_dependencies += [dependency('libdrm').partial_dependency(includes: true)] > ++ wayland_platform_dependencies += [dependency('libdrm').partial_dependency(compile_args: true)] > + endif > + > + > +-- > +2.38.0 > + > diff --git a/package/cog/cog.hash b/package/cog/cog.hash > index aa128d73d8..a2c55c4b94 100644 > --- a/package/cog/cog.hash > +++ b/package/cog/cog.hash > @@ -1,7 +1,7 @@ > -# From https://wpewebkit.org/releases/cog-0.14.1.tar.xz.sums > -md5 69d72ac046a0fc485ea7b61b96e7e7fc cog-0.14.1.tar.xz > -sha1 6236972b0ae0bce38a0a017610f161b349723862 cog-0.14.1.tar.xz > -sha256 fb91104e25e1dde27189c91c70acc356e387f47acebaa8997e01ce5879c3a600 cog-0.14.1.tar.xz > +# From https://wpewebkit.org/releases/cog-0.16.0.tar.xz.sums > +md5 2705472ea4f333290973722c0862b21d cog-0.16.0.tar.xz > +sha1 ef16e5e3d91d0da056fe5e4f596c211af7453b4e cog-0.16.0.tar.xz > +sha256 2956f719d36c9a6368f63901a0d1ceaf4d27f529f7df441b3748c36d72906fc6 cog-0.16.0.tar.xz > > # Hashes for license files: > sha256 e6c42d93c68b292bcccf6d2ec3e13da85df90b718ba27c2c2a01053a9d009252 COPYING > diff --git a/package/cog/cog.mk b/package/cog/cog.mk > index 1f24bebee4..241c4e309c 100644 > --- a/package/cog/cog.mk > +++ b/package/cog/cog.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -COG_VERSION = 0.14.1 > +COG_VERSION = 0.16.0 > COG_SITE = https://wpewebkit.org/releases > COG_SOURCE = cog-$(COG_VERSION).tar.xz > COG_INSTALL_STAGING = YES > @@ -12,37 +12,40 @@ COG_DEPENDENCIES = dbus wpewebkit wpebackend-fdo wayland > COG_LICENSE = MIT > COG_LICENSE_FILES = COPYING > COG_CONF_OPTS = \ > - -DCOG_BUILD_PROGRAMS=ON \ > - -DCOG_PLATFORM_HEADLESS=ON \ > - -DINSTALL_MAN_PAGES=OFF \ > - -DCOG_HOME_URI='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > - -DUSE_SOUP2=ON > + -Ddocumentation=false \ > + -Dmanpages=false \ > + -Dprograms=true \ > + -Dsoup2=enabled \ > + -Dcog_home_uri='$(call qstrip,$(BR2_PACKAGE_COG_PROGRAMS_HOME_URI))' \ > + -Dplatforms='$(subst $(space),$(comma),$(strip $(COG_PLATFORMS_LIST)))' > + > +COG_PLATFORMS_LIST = headless > > ifeq ($(BR2_PACKAGE_WESTON),y) > -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=ON > +COG_CONF_OPTS += -Dwayland_weston_direct_display=true > COG_DEPENDENCIES += weston > else > -COG_CONF_OPTS += -DCOG_WESTON_DIRECT_DISPLAY=OFF > +COG_CONF_OPTS += -Dwayland_weston_direct_display=false > endif > > ifeq ($(BR2_PACKAGE_COG_PLATFORM_FDO),y) > -COG_CONF_OPTS += -DCOG_PLATFORM_WL=ON > +COG_PLATFORMS_LIST += wayland > COG_DEPENDENCIES += libxkbcommon wayland-protocols > -else > -COG_CONF_OPTS += -DCOG_PLATFORM_WL=OFF > endif > > ifeq ($(BR2_PACKAGE_COG_PLATFORM_DRM),y) > -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=ON > +COG_PLATFORMS_LIST += drm > COG_DEPENDENCIES += libdrm libinput libgbm libegl udev > -else > -COG_CONF_OPTS += -DCOG_PLATFORM_DRM=OFF > endif > > ifeq ($(BR2_PACKAGE_COG_USE_SYSTEM_DBUS),y) > -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=ON > +COG_CONF_OPTS += -Dcog_dbus_control=system > else > -COG_CONF_OPTS += -DCOG_DBUS_SYSTEM_BUS=OFF > +COG_CONF_OPTS += -Dcog_dbus_control=user > endif > > -$(eval $(cmake-package)) > +ifeq ($(BR2_PACKAGE_LIBMANETTE),y) > +COG_DEPENDENCIES += libmanette > +endif > + > +$(eval $(meson-package)) > -- > 2.38.0 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From t_fahmy_bassem at hotmail.com Mon Oct 24 04:56:56 2022 From: t_fahmy_bassem at hotmail.com (Bassem Fahmy) Date: Mon, 24 Oct 2022 04:56:56 +0000 Subject: [Buildroot] buildroot defconfig fragments Message-ID: Hello, Can buildroot defconfig take .config fragments? something like what is suggested here: https://stackoverflow.com/questions/44078245/is-it-possible-to-use-config-fragments-with-buildroots-config Thanks, Bassem Sent from Outlook From thomas.petazzoni at bootlin.com Mon Oct 24 05:43:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 05:43:44 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-23 Message-ID: <20221024054351.A7A414023F@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-23 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 5 | 1 | 0 | 6 | 2022.08.x | 15 | 17 | 0 | 32 | master | 146 | 290 | 13 | 449 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 18 crun-1.5 | 17 glibc-2.36-44-g2628500f5dff... | 15 sysvinit-2.99 | 14 brltty | 11 host-sentry-cli-1.59.0 | 11 xz-5.2.7 | 10 autofs-5.1.8 | 9 libarchive-3.6.1 | 9 btrfs-progs-5.16.2 | 8 host-f2fs-tools-1.15.0 | 8 linux-6.0.1 | 7 efivar-38 | 6 host-binutils-2.38 | 6 host-pahole-73383b3a39afe86... | 6 systemd-250.4 | 6 unknown | 6 igd2-for-linux-2.1 | 5 libglib2-2.72.3 | 5 linuxptp-3.1.1 | 5 file-5.41 | 4 gobject-introspection-1.72.0 | 4 lxc-4.0.12 | 4 ocf-linux-20171122 | 4 casync-4ad9bcb94bc83ff36cfc... | 3 check-0.15.2 | 3 dahdi-linux-5c840cf43838e06... | 3 gerbera-1.10.0 | 3 host-binutils-2.37 | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 host-rust-1.64.0 | 3 linux-pam-1.5.2 | 3 gensio-2.5.5 | 2 host-bootgen-xilinx_v2022.2 | 2 host-gcc-final-12.2.0 | 2 libcap-ng-0.8.3 | 2 libcodec2-1.0.5 | 2 linux-5.10.145-cip17 | 2 open62541-v1.3.3 | 2 perl-5.34.1 | 2 php-8.1.11 | 2 qemu-7.1.0 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.33 | 1 acpitool-0.5.1 | 1 afboot-stm32-3566acd582e553... | 1 bat-0.19.0 | 1 berkeleydb-5.3.28 | 1 boost-1.80.0 | 1 cairo-1.16.0 | 1 cryptodev-linux-1.12 | 1 docker-proxy-f6ccccb1c082a4... | 1 dust-0.8.1 | 1 elfutils-0.186 | 1 f2fs-tools-1.15.0 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/jffs2/jffs2.mk:71: /home... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 host-moby-buildkit-0.10.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 ipmitool-1_8_19 | 1 kmod-29 | 1 lapack-3.10.1 | 1 libabseil-cpp-20220623.1 | 1 libgcrypt | 1 libgcrypt-1.10.1 | 1 libglvnd-1.4.0 | 1 libgpg-error-1.45 | 1 libmad-0.15.1b | 1 libmdbx-0.11.12 | 1 libtorrent-rasterbar-1.2.15 | 1 linux-5.10.145-cip17-rt7 | 1 lttng-modules-2.13.1 | 1 makedumpfile-1.7.0 | 1 memcached-1.6.16 | 1 mtd-2.1.3 | 1 musl-1.2.3 | 1 netsniff-ng-0.6.8 | 1 openpgm-5-3-128 | 1 opensbi-0.9 | 1 rsync-3.2.5 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 scrypt-1.3.1 | 1 stress-ng-0.13.05 | 1 sysklogd-2.4.4 | 1 usbguard-1.1.1 | 1 xfsprogs-5.14.2 | 1 xxhash-0.8.1 | 1 zabbix-5.4.9 | 1 zeek-4.1.1 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips64el | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/b42c522c36c82775db295b76cbe200d4d858fcc6 | i686 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/63321cac0ca778792f216e6def6410bd69194d20 | aarch64_be | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/ba94788cadbf08fa8fb6f5130dd81401a92b1744 | ORPH powerpc64le | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/40b888ac633c3ccd0b21b58847a6d9c1b90e6b8c | arm | afboot-stm32-3566acd582e553... | NOK | http://autobuild.buildroot.net/results/552369988be9691080f30bac6d2a9521f312fabf | mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/f60929222aa300a41bd0e37a2f923edb54e25d3e | riscv32 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/ad4b77419b637e392abf247aae0bf70c512f3a92 | aarch64_be | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/12e5d2913cdc7cfb9cbc74be3848d8e15aaa370f | mipsel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/40d14b3276dac432b9b822fa6d9672a4cf67bab1 | mips | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/a36a039c73d87191aa625a94105b0aed7c9c4132 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/3c70d49a56919324118026baa96c7980c335a175 | arceb | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/b3cf807bbc1b249fa384779e9f40b3c42a9c1069 | arm | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4ecc7893ace4d0df13e498abf96ee8a0b540b21d | sh4 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/916e61d2c8d77c82452b76d7fb79a62a412aebc4 | x86_64 | bat-0.19.0 | NOK | http://autobuild.buildroot.net/results/c43dd19364a6f5b5c88ec6cf102ca8f08fa05118 | sh4a | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/d7bca45e21413503bf05ba7d960034dab36e9ce3 | ORPH arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/eec0f014c35a979a2093ae774ae0c06824298b5b | sh4a | brltty | TIM | http://autobuild.buildroot.net/results/30e0e17c18625be3cd0dbeff0f944fdb8017f87b | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/0c4b7ac99e3487562186489ab9146d3ee622b9d0 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/7642546d19f6c797762d251003e43c3884d42403 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/5f7733176c71d45f1d45d23234ded6070b43cce3 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/f59507cf4ea86156db0a0ebcb1f8adb32503b71c | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/1048ea11d2f88d23a9ed3e205b0b2be5e771f914 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/7aea549f3c94ec87c331b90f9af47c25130e3f3c | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/702e38f7ad9459a7d2239b059a7c9dac043deac5 | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/6eca433e6d726621f7105a89ec5b8683b63e3a6a | i686 | brltty | TIM | http://autobuild.buildroot.net/results/382a1f08f8a3a0f14f0d4b825cb52fd537e139e0 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/af56b53bef9de7aa73919371e08a5ef6c32ffad5 | mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8dbe943828f5c5e2be5c762be34e80470ba26cb1 | ORPH arc | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c16077ad34663513bc27a686d3c92c6fd18db3d2 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/cd9dc3bd988d2333584ff2a73909afed2fcdee96 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/eae0f617c1b95316badaf532acd1f37222c802fb | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9d8a4ccd57a9aaf3124c42c3f039d953689eddbd | ORPH s390x | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/bef1f6fea6f806467c7a9805cf538f908ce402b4 | ORPH mips64el | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/9eb5a4d2248f930286098385c6e36311169195db | ORPH nios2 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/51aa36ba72b39e969e6e4e8741452feb06bd19aa | ORPH xtensa | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/36bef4bcd8dc710c25a0008f4f3abff5f7dd7cb9 | mips64el | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/40b6310897b3ceaa510d22bb351bd4075efbe867 | x86_64 | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1cb60274ba252e2d730a23825c610fa6511ebb5b | arceb | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/1eb00289ee6b9121e44c9e6e8a4851eec4a5d1d0 | mips64el | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/167857619d6d0352bde53b3c980c650dda5c3e83 | ORPH s390x | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/cf0374b90004afa8892ca65d3da9a906653a2afb | ORPH powerpc64le | check-0.15.2 | NOK | http://autobuild.buildroot.net/results/c628e5a3254227ab317c3c53d71b8f4a2cb01e69 | ORPH mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4a01771dc39bd846b977d51d0d2bcd3a83b59ce3 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/ce62622db2c80e3b3514848dfe84cbaa4ed73589 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b94f25b08507a4f8f6f68b6d0ae107add7bf0ebc | aarch64_be | crun-1.5 | NOK | http://autobuild.buildroot.net/results/754fc5d6c65639c914a6663b642be6211a7ca379 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8ede7a25ca3557853c343d35435734bc6982414f | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3209d5d8005eb3aa58591f705a0963b8a614358a | armeb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d0c08367604714c80fe1304bba50a6e6b0533580 | arc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b7db29b71113358f5459872d3fcb487b2748e967 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/110c6c805ed8b0437fe923513c2c099e6edfd5c5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/61c29ce6d978506de4dbbd6f1fe5289ec65b034c | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a905d611c04a4322a64aad6b5117de3497804d7b | powerpc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6f9a7365c3d3a5ef34da3f93adf6675a77144dc6 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6e92eebf56237f24bf79260bd372201a23febdce | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7e97d0c5047e0687777e388af413f4b4dea341fe | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7bddd2fa5c743032e9c0d7c0eeafe450b7b7e683 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/348624f02b80119a1cdb24a4dcf47fb9274adbd4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/80de3f5fac766e1d7928f0009dcc957ee3bfa77b | mips64 | cryptodev-linux-1.12 | NOK | http://autobuild.buildroot.net/results/07ce1e1f85567311caf1e279fe7920749466d81d | ORPH sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/2a8dfed68c57d515bdee2609d0f8a69763b1ec0e | x86_64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/ff912172a9b28286faa5cec3a95080add93718e5 | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/721a6a939b04b89611e4c71a09b0997a87e9b938 | arm | docker-proxy-f6ccccb1c082a4... | NOK | http://autobuild.buildroot.net/results/78cb7fd7ee323c27d677847d3b7b5449ef77ca29 | mipsel | dust-0.8.1 | NOK | http://autobuild.buildroot.net/results/348c074d94f03c8c1adde8394d5b8c1c272a8af6 | ORPH aarch64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/335fe474e0e9cf367f71a5dac0cfe435823f1f4c | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/313a8bb1b62bb0b21bf4d4d4cb2a6e8200922b63 | mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/9cdd78a8e27757d3fe440728cfdd0290c13390ce | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/4a7eda370abd78e66a207547cb225882f6395585 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/279b8898bd863be04ccf8e4b0fe74c4060460ab1 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/46dd8c7c5f391426d60f9ad22fa6bc078ec35b16 | arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/a3f0044be07694b8e565f6796f3483dcc23c3700 | ORPH or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4c33bb623413d165babe08fc75723780bb22c0fa | x86_64 | file-5.41 | NOK | http://autobuild.buildroot.net/results/e9df7ce1c6f2c647577ed71cabc455e834d53eee | ORPH mips | file-5.41 | NOK | http://autobuild.buildroot.net/results/8b15d8869590df76dc9f5ca54ac17a0246a534b0 | ORPH armeb | file-5.41 | NOK | http://autobuild.buildroot.net/results/ba3b2040cf4706539d05ca948fb68b3140e7ec18 | ORPH powerpc | file-5.41 | NOK | http://autobuild.buildroot.net/results/4f03255bb6869b741c952c8ae0ae92e50e055db0 | ORPH powerpc64le | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/949165f4cc1fc4e0ab3414bf2106e3c878463ccb | microblazeel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/1ac24641338a39a1d8bb467549fb061d4d50f76d | arc | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/dbb9d18074c7fb6fbf0f5417a09a06ff80c28728 | mipsel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/9f182ce53790079f2a2190438d7f906219150442 | or1k | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/f2db6855b19cbdcfc08c053f66dac115c927fb59 | xtensa | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/e9a3b52ef3dbe3fc34bb1d86eb15d01f9d0fc3f6 | mips64 | fs/jffs2/jffs2.mk:71: /home... | NOK | http://autobuild.buildroot.net/results/d3179d776c6592e8769aae5da3114d10236aa9db | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/ca41cde80a05d129c34dfddc948392febfb044ca | sparc64 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/382358c8b75dae31bea84bc26e2fa3f9e5d8b28e | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/e9ee230a353353f327849d4623b25b4419711189 | or1k | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/3068e221db92591a30b5ab2e9cb7fe4fd8e7e91d | mipsel | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/a1805e7f39d24d90128a936ef1088c3538746f7c | mips | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/00d7fe77e4633a8bf3c55aca3e4448a43ccc679a | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f3a3a95082eaa9e7229ff19e54f26cbb696e8b2d | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/16017208af2fa299c72a5243f621624f0e0c1022 | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2b58412465e0bef9b55fb6599d2b80a0a0edcb1e | sh4eb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/dd462518160685c087349bc9b0d9585477a57070 | x86_64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/860857d954eb7e7c4e7323641cd36bbf63cab6ee | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eb46556ebea4640ce5b2d5f13c48a7382bb54aca | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5c5dbb3613d688879392da3aa5ccfcf5b8c87c32 | sh4aeb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/97373fd7e72dc83d465ce40e8d01a55079da8b31 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a80f253236c6ef7d9d7664704e1302881a6e11bc | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/68b6818134906c39a8d8eff38851c20fca50a828 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6136bc8dedf80f8d3a4618897d32c1654d8d8d1d | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7a02e35fba0d8b6fc8507abfa6c6f2968f49d435 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6ba98660efa1c5a9192d130e3b9c608d8e566b17 | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a7796972d9a3d14cadb4297708a31d76888e2894 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4f981567334056eb45dc367767d85c7410fdf4ce | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/9692a9b510552ea69291722d7b64af76cd2b3cba | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/33241039319f9657f5591a5bc8ea9820260bbc0d | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/e28ecc44a6ba5217d5b16c9f0e33fc7de84a83bd | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/5267324b46e492f9a450996e5f461ac18dc10000 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/319fc544fc8061706ddab7e60920f3f62a57636e | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/16507741b4397d1ec76ee2afb67f782284057206 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/24f73b0be150d0582127c41223d75a17e266dd6f | armeb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/7a2efa520b5dafebaf5794cebf73dbd9cb286945 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/adbd85513e1e60dd7d8f04e074050146d04dd847 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/bf263e4435e44b527f17cc643660ebfd25b3d4db | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/9ccc5b1f41d3d2b1780c681a5e2841966d90ac74 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e09ed2d14e85dd8cc9395e071cce03de4a3e4757 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7a02428e280b88e6878df7d571044fed13586443 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12b5ae9cd7e8f6492f08f19e2e4d9e641b453162 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4a97fc4e098823b72a47d04711c7c1da9ab2f416 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ef3cdcc4752764789680f42c2122fbedb467e2f0 | mipsel | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/53e02d0b9e1f618844c92ec8d91b496c1687a134 | aarch64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/d6dd08e7e31ca4cb2254b61b60e474da1267ec6a | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c421aa32a989a6966836fbb3bfa9e2262a4d3c9b | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bead4eac6fb89b8e3e089a8ed6a86aa2573c258d | arm | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/3bda66355d76fc0e3ab173bc3d38c2f5f58d467f | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ea1cc47809954149c93a654d53249d3e8a351475 | nios2 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/de3de41b2752f7225e9452f9e228965285373163 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cea5845a01220ca9be28195024d904a2a34633e | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e90b0412f30acb13fc8adc3107036b9d73e1fd22 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/363c2289f3e90d43f3de59c6607d2ee1058b508b | microblazeel | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/e48486923d567b5142fc6c309cadb3166baf7ae1 | arm | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/11e53148c82853d2b267957f94be0636fe5f347f | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/da2d68b112151251a847a9d5c078f9f370c43690 | microblazeel | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/571a6d4a034edec36c782bf7760b1a67020fa0e0 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/5b4ddb2b9d46914fa82b82ad09ee462cd86e6dd1 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/1d69cbd70b2a0d6753ea9bbe3ebcc54e24fb11bb | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/8cb6fc3d0649a2ab8ff6af1d893a9db6e19496b4 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/dee970ea342aaefadb9269bba95fe996c094e982 | x86_64 | host-moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/23151232f4549e450adf408db0b06ef08f65423c | arc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/546f6b68dfe29892a2a2d16a4ca3196dcc79e535 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e45ba0c8fa179908359f82e3cf8cd0ec11dc0465 | aarch64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8a203093638a1a23d9086b8a2ed1210e52b3b8e4 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/62e65bc2217398b6adab8b660f0c6ab7fde3489d | mips | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/85d400ffcff0f4dd32cdb3e052e11f16292d35b7 | arc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f511f98752da5c41104ec5ab9862861bad5aead3 | mips64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/3859c3fa3c6e0bc1394f510577b0340c81d5293e | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/da885d19e03298765f2e25898ccb62594f6862c5 | sparc64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/9e3e00194a2bbed54dbadd7183309828055edf38 | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/274e1b6beb34d55ecf9d33134079e64cb4893a83 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/cc7a89b67636c6105095f0b799d6e80447fe548b | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a66450f5e85dd3e6cddd65f1519b8f56cb7f4fb6 | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/ac2ab923e626ed51d489fcfbc3fc5c039fc32047 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/78071e629ecf793b2adf985d7b75d9bd168c8cef | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/df4c82a85508554e6b55a8c00863e73335075beb | sh4 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b00265219d49fbde77d4c74e351ff0313f4c55cb | i686 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6221555ed2a15eee8658739d94bf323ba8a7906d | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a4f3f72ff2cdf4bd443e1a88c2861d66d3c3c1ee | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/7eddea8181225408b1caab6cf0634025e500c47a | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/38b34c48f8fbc95f99bc9228e69362cd1d206ca9 | powerpc64le | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4ebd96a34888eb81c6b2ddb66284e9efacb77db0 | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/2873934d8f1c36deac29504227edb9cda3c6e0f5 | ORPH mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/7c92165b20847df534e41a569e4ef0d22854f11d | powerpc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/54f7f11ebfa6c83805194ac9dee20c65c941c847 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3010bdbd4b9ebcd312ed6aa30194138ad79bb7f2 | aarch64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/53677095092355d9d7efd0b725e3fd376b4480fb | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/86c086f3f7590a8a3e4910ad0155e67929382cae | arc | ipmitool-1_8_19 | NOK | http://autobuild.buildroot.net/results/d1a11e0dc63147fa1cc758c869a01e157ccfd014 | xtensa | kmod-29 | NOK | http://autobuild.buildroot.net/results/4b93d86e1f0304fe1a1165ca53d64fe00490213a | riscv64 | lapack-3.10.1 | NOK | http://autobuild.buildroot.net/results/b5e0068f8f63a22f024b1291fbac8d70f56c72db | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/4940c23d57ee0c8f0d0ee95fa6720bc4e05f97fa | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7a6fbe5590d375d0693865643c372a78922a0899 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/a53e54b1d57d1fbb4f54920b32a4317c17d0552f | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3c0dbc048c3e77fa4204d060bc41d8b216986457 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f74081b84c1bd8ba72eeb9af612ba38303866448 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/7f36a5be735f07921df4fd69201c02449edc592f | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5af203362c0befd72bcccba3d0344979ce661d4c | riscv32 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/f21c99adf66c009255998b0edfae93715ccbdbf1 | sh4aeb | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8f7823fb13111c0ab79766445868e78cf2b8f429 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/aeabff7a45ae55c52d3d4ab75e83b9078d7b91dd | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/8b6bc7c43aa626c9316566878ee5189c386edafb | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/7cd436023ed41e0f875433bed7c6eddfd3b30198 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/1f1693ab2763c5fef87d87dde2c41f477f59c352 | aarch64_be | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/783796bff28f92bf62ad80a72c1508dcd41611ed | arm | libgcrypt | TIM | http://autobuild.buildroot.net/results/70d57d1cab507ef17a0ef252b6a58bec7d0dbd05 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/c13258ed09a5421437cb07ba50a04af41add17d7 | ORPH arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/fada00f14b03b899c473b5432d5a25436894bec6 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b3998c92bed90d8dffcf832bd4de3460d4136c11 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d1e9afb13d96f679c4ed6a41e4496f3fbf9fb768 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/0ebc1ae900ece7f797cf4622c95d82d90ced5b99 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/a5844c479ad13b404383ca05318b5a23658398c2 | i686 | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/369d5956f628fd89ceebb10c2391350d83ffb6bb | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/fc20ac64786179db1de61feb4a66af4ceff758ee | ORPH armeb | libmad-0.15.1b | NOK | http://autobuild.buildroot.net/results/98f93f2adf38428ac7d1f7c878f7de728da3afe1 | ORPH mipsel | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/663312a17a584ffb217ff8bb2330ed18e45ac218 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/300d3c5470999b3a23a7d52ab31ab2df06a1db83 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/958c94fd7ebd6b6384b52f2099d0d49885ae07ac | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c7e95e1987cb01f8b99ed4dc1c590291e4dee77d | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9f184a5dafa126508e3be5919155c117ef48a269 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a0a29443ee5d675875ce0f858464f085f330a3f6 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d46e93185da8ee00a4f78d7fd696d3a0cc08c8fe | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c8da3a0bca6d3e297f1f955d613547eb12de6c4f | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f0570078d0d60eec11677737ed87d027c1e1df7e | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/193b097c0c62f5cec269540c3693207df8f1a038 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/071be1b7bf7c0b1fbda0645ba1870d976a999e0a | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b2f4d24a7d0e606a1414f5d42680a6e5321562e3 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d0cd13fc9a0c2c79d53768841e6fd620a14b46b | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4e3dea3f3e6af5eb59c8747b144cf0039e040e31 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b8eec21e1f3c6c14f0e93325f9ab21bf5d51f798 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1ed284d10347c4d6063680623129f1fb2af17f4a | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1aa674cfe942ef3a1fb879d02d9505b9cc72a71a | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/216ca5ba3fba818f29d0efcb8945d4e052b4c05c | riscv64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1842058f5e98fce860be6922726d03cc50c543a7 | x86_64 | libtorrent-rasterbar-1.2.15 | NOK | http://autobuild.buildroot.net/results/b77d52c8533b2c0cf172dcc6cb3fb7b36930c656 | i686 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/2a09958334e2dd16e22d3c659bfc37cbbf073c36 | ORPH arm | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/4d5bfba05afbb6ebad42ceb9b710a182a801e94c | ORPH aarch64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/343e7df635d7093fcf6fda06e4a6c8d7f20d5be3 | ORPH i586 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e9c001923975f10574880e5d36324f8e53e967a0 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/2e95dce5e7731fff57bb9ea12a4e894bbd17cf17 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/659ee776088da5f74a19cc9f1a559a04c0777bf1 | ORPH x86_64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6119ea5334d78adc6f6c85dd43f48caa09a91c9e | ORPH powerpc64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a2b225d44c7326c412a333994ee48003c6b6f2a2 | ORPH armeb | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/166fb5d8206604bc0ad8b7513e6426f2efa2fdd7 | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/35955eaae3c562fe064405330e187c15e55e3b7d | ORPH mips64el | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d8312c75d6f4ec97da24198bf3c3e152fee452e | ORPH m68k | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/b885b29fb5672232a0e7451ebaf8d7f508eec093 | ORPH mipsel | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/be2f9568ac465df2a584496fcd92a1c8cc3216c6 | ORPH m68k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/d08042cdcdbe93855501d2ccb5c4e5987c9acec8 | m68k | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/bf10c24553263dca2cb02695fc829f721dd0691a | arceb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/1936113ccc64eb92d71946e3e5afd8daa060acc5 | nios2 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/4c351e8f85d6ac1c8ff8746f616ce78f67a64670 | microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/11f071cd7dd443d7f6a6a3e9dca43fa078891bc0 | arm | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/e67808071b3855473cf6e5bc42b30d98f66d2786 | aarch64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4bf3049d0f3f7644c204e527f0ba2cba91b5e413 | powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/e63a7b7ea7ea6bb7632dc73691d97a3ccb08733f | aarch64_be | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/ef6aa8c6c5310ed8d5c0f3d76d2bc19bafdc37b9 | mipsel | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/cc70f8164144f6a5375cfbfa1aa034d5f658de8c | mips64el | makedumpfile-1.7.0 | NOK | http://autobuild.buildroot.net/results/2de3402f738c7cc0d37a5052bbaccc591ca0d0f3 | arceb | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/d825843fb9e1763ad313cfa6442f1246be75c6d5 | ORPH sh4aeb | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/1ed8975f45b82457377e054e58f8876e265ae1df | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/a193b91e5ceb106e78cb4778c2182b149b4aaefb | powerpc64le | netsniff-ng-0.6.8 | NOK | http://autobuild.buildroot.net/results/0afa69c636ec2a568fe6b8a2715eea01b60752b3 | sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/1afc5fab1f4ce58497cf538af61c72572b50a7bc | ORPH riscv32 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/238ad270c610bd3a07858cde1cdf5fe5e99e9f9a | ORPH sparc64 | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/62b1f8dd7fcb7767ef6b20c1002581a47cd7349c | ORPH arceb | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/c76f3cc4fb579182db0f687b2acc5a001b71322d | ORPH powerpc64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/2cfb9dab7db36718d13bcdc2d478d7d8c1841d2e | ORPH microblazeel | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/325eaf50aa31b009c4b55542b742f611f8e8dc0e | ORPH aarch64_be | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/5cb7f85c1a8b7a2bad7b2ed6b6ecf2125df6c8b0 | riscv32 | opensbi-0.9 | NOK | http://autobuild.buildroot.net/results/f561ac104fa3491fdfd9a597954cf5f0a191b5c2 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/8067e7870b1d8eb8640d09c4f5eadcb4d01fe21e | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/c1bc731b9aac3fcdd58df163c261bff891717909 | arm | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/3992a1faa671492a3c64629f4352b1f2c9cc126a | microblaze | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/94d6df4cef7d5d01bfbe29ec12134790cfc9c8b9 | mipsel | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/052c4a07372e0018d42fd0b6b0e31bc196a8e918 | powerpc64le | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/1eeb096b0ae1092aa231655cd6cbf9b661551e2d | x86_64 | rsync-3.2.5 | NOK | http://autobuild.buildroot.net/results/9e6b69e146ef4ba6ec5ea93354f30dad01535605 | ORPH powerpc64 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/83153ed38a583ce2712df9b142ac3fc55a8413e3 | arceb | scrypt-1.3.1 | NOK | http://autobuild.buildroot.net/results/60ff1c7da93176ffc3de5878c104e35bda57c0a5 | or1k | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/5c80a688822f3098fcc06baa0dd5e45e6f745c44 | arceb | sysklogd-2.4.4 | NOK | http://autobuild.buildroot.net/results/d547411c8d1e5ddaf964a05ee25752c48ef7a9a6 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/792301e1858281d40b6822854b812a4e7146e0d1 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c178c8cc219da0ad5f090be0701ff76b3396af67 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/da969aae64993d6449ab5e3c0895ed58bf804739 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f257fed3cffd825c55c327c97c0f5c65f312b6d6 | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e6b3534c65d5913b9c96a83e9e9c2b37742a3af6 | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/0699eb212420ecae0660cafe2d26f76dd997a4db | aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/1f9b391906774c893574e68d2ddd5f0f3c0fbce2 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/19c6f9f833f71935b6691922ce94dc3ca8f05339 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/33c9cef36c033f7f5468326952639cde8b5fd848 | ORPH i686 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/8d59beed1410bed08568b5fb520de2ae90b85c11 | ORPH nios2 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a4b8acf056ba1c57d6a160701a46e25578362275 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/eb01fd43c48de025b94f0715f9825b5ee2e9223f | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2ba7820aa8cf3407d51040e65dc635d7e5e778f | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/cd2620d687acee217d0e9f331b3faf6bf4e08ea9 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f0925a24b8edf501d432cf1de8bfb6de544d9d0b | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/567fa27ec558b65f3ff26616d5bb7ea1f111285f | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2fab4a9a9c4302c581481c57b44c2b9a03c87c42 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c40a211d81c70245fe276f752bd9cb4a698c4a9b | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d456e5ea98f870049529924aa65e74cb513d29df | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a9d96446362a8e3368a4ad366b3d55fc4fb7c353 | ORPH sparc | unknown | NOK | http://autobuild.buildroot.net/results/1e5bfbe5ac65087dd04666b103188bbdf508291f | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/218173e49f4b13ccaffd4197606c997a8964b2be | arm | unknown | NOK | http://autobuild.buildroot.net/results/4c27f228c5f533c231f82ebfa196184ed88118c7 | sparc | unknown | NOK | http://autobuild.buildroot.net/results/7e4fb7051500243d5e2d69cd1e23c66fb03f6b4c | arc | unknown | NOK | http://autobuild.buildroot.net/results/c5c51fdd93a7f6ae896a35560f7549700d649a91 | microblazeel | unknown | NOK | http://autobuild.buildroot.net/results/3a5013ef3f43dc01d8f6a4dd89f764f6819839d0 | sparc | usbguard-1.1.1 | NOK | http://autobuild.buildroot.net/results/a84a46fff2ff0a09bce07b116e0db4d28a69e7af | mips64 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/e79dd4096b0778ba58228ad99733e6984b8ffd98 | ORPH nios2 | xxhash-0.8.1 | NOK | http://autobuild.buildroot.net/results/cab96ca279dc04677232acedc1dccd6519a10e60 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/fd5943ec0dfd32f675d7f082f04b6bdf5307d913 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9e862761ceb8d20b32a3fa700ead9b6a8dcf51df | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bed7008ec341e6cf03af818e83b0cc89afe473d7 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/b2a440198bed7b3be0c2e141911183dc19ebd514 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e9e8f9543f9416de5ccc4d4be384bce32a0191dc | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c25aaa34b341c999a7d3e79c59da8a2324f194c | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/37ad8bf425a4eb776933a3a4dcdf74e2e4a88a07 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/67cd92debed9ea17bd58ae675ef41ad190b1206d | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/452405c704cf3cd7de46602dbd67f3c9661b2c18 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c895415de2aece276e1252a48468e3f9eda8c59a | ORPH mips64el | zabbix-5.4.9 | NOK | http://autobuild.buildroot.net/results/ece3a94772f222f4c0fb8ae7fe80b7427df8058b | mipsel | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/35a4a5728c25dc8d9b7a1915e6bb8a50f4501daf | Classification of failures by reason for 2022.02.x -------------------------------------------------- ulog-0389d243352255f6182326... | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/2b29be83ccd59fd0cc3f5ed89a0890cce729e650 | Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 4 igd2-for-linux-2.1 | 3 containerd-1.6.6 | 1 edk2-edk2-stable202102 | 1 gerbera-1.10.0 | 1 host-pahole-73383b3a39afe86... | 1 host-rust-1.62.0 | 1 libnss-3.81 | 1 linux-5.10.109-cip5-rt4 | 1 s6-portable-utils-2.2.3.2 | 1 uclibc-1.0.42 | 1 wolfssl-5.5.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64le | containerd-1.6.6 | NOK | http://autobuild.buildroot.net/results/e6a6c1059e06fd9262454afbe34e7d393b216cb3 | aarch64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/a89b52ded8d0a3833639decc5a1cdda0ccc7e6ec | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/42b1892cb58ac63d15dc4fe0a69eb3be7affad5f | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e4ee28d0e2b48f21dd2b9878d7c4b17762be19c5 | x86_64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/755dd6404574ae12603dc21d832cf311addf5ff7 | microblazeel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e31694e75fe26b40d12199e42a5bcb852f2d5400 | i686 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/5b019016e65b7af7f866325d0d1c11802b2ff89a | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/b629a4c781e80dd05655aab62f603ade8c5b7744 | aarch64 | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/5f9789ad3c8a8af2fdae3f0e7922d939e25847e1 | sparc64 | linux-5.10.109-cip5-rt4 | NOK | http://autobuild.buildroot.net/results/1bede0b3726bba251fe26ee44c062af11dd97c7b | ORPH mipsel | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/230f11ef40d47732632aa0c8c4764e36efeb5a6b | ORPH riscv64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/6e23262199b227944a89140fdf3682ff9453ddda | ORPH armeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4d573fba08d62a22db92018e866af6054a124fad | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fcd4c25dc56d437fbc04cec7a830c2cba58b2291 | ORPH microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/9683911baa799c4bece351413d5512a51b8538fa | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/26719bf4a2a97932e723299fc4f3835f63a227f5 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3cc134d7ed1001454298e14c2fa0b8f512c519fb | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpid | DISTRO | https://release-monitoring.org/project/00019 | 2.0.33 | 2.0.34 | ORPH adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | alsa-plugins | DISTRO | https://release-monitoring.org/project/00041 | 1.2.6 | 1.2.7.1 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.2 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 20.0.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atftp | DISTRO | https://release-monitoring.org/project/15219 | 0.7.5 | 0.8.0 | ORPH atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | batman-adv | DISTRO | https://release-monitoring.org/project/19529 | 2021.4 | 2022.2 | bats-core | DISTRO | https://release-monitoring.org/project/10587 | 1.4.1 | 1.8.2 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.66 | ORPH bdwgc | DISTRO | https://release-monitoring.org/project/17108 | 8.0.6 | 8.2.2 | belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.66 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.66 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.8 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.7 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.2 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.3 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.1 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.4 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | conntrack-tools | DISTRO | https://release-monitoring.org/project/00338 | 1.4.6 | 1.4.7 | ORPH crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | dahdi-tools | DISTRO | https://release-monitoring.org/project/10252 | 3.1.0 | 3.2.0 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.19 | 20.10.20 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.11.2 | 2.12.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.19 | 20.10.20 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.05 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | empty | DISTRO | https://release-monitoring.org/project/20564 | 0.6.21b | 0.6.22b | ORPH enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.1 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | execline | DISTRO | https://release-monitoring.org/project/05482 | 2.8.0.1 | 2.9.0.1 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | fetchmail | DISTRO | https://release-monitoring.org/project/00801 | 6.4.29 | 6.4.34 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.3 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH file | DISTRO | https://release-monitoring.org/project/00807 | 5.41 | 5.43 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.2 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.20.0 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.9.29 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.1 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gawk | DISTRO | https://release-monitoring.org/project/00868 | 5.1.1 | 5.2.0 | ORPH gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.1 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.5.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | go | DISTRO | https://release-monitoring.org/project/01227 | 1.19.1 | 1.19.2 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3.0 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.49.1 | 1.50.0 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-shark | DISTRO | https://release-monitoring.org/project/21854 | v0.7.5 | 0.8.0 | gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH hackrf | DISTRO | https://release-monitoring.org/project/06136 | 2021.03.1 | 2022.09.1 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | harfbuzz | DISTRO | https://release-monitoring.org/project/01299 | 5.1.0 | 5.3.1 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 72-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH igd2-for-linux | DISTRO | https://release-monitoring.org/project/21356 | 2.1 | 2.2 | imagemagick | DISTRO | https://release-monitoring.org/project/01372 | 7.1.0-45 | 7.1.0-51 | ORPH imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.4 | 22.6.0 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.4 | 22.6.0 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH iperf | DISTRO | https://release-monitoring.org/project/01388 | 2.1.6 | 2.1.8 | iperf3 | DISTRO | https://release-monitoring.org/project/01389 | 3.10.1 | 3.12 | iproute2 | DISTRO | https://release-monitoring.org/project/01392 | 5.19.0 | 6.0.0 | irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | jack2 | DISTRO | https://release-monitoring.org/project/21358 | 1.9.20 | 1.9.21 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kismet | DISTRO | https://release-monitoring.org/project/06966 | 2022-02-R1 | 2022-08-R1 | ORPH kmod | DISTRO | https://release-monitoring.org/project/01517 | 29 | 30 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.16-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | ksmbd-tools | DISTRO | https://release-monitoring.org/project/241856 | 3.4.5 | 3.4.6 | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.2 | 0.3.95 | libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libcodec2 | DISTRO | https://release-monitoring.org/project/14605 | 1.0.5 | 1.03 | libcurl | DISTRO | https://release-monitoring.org/project/00381 | 7.84.0 | 7.85.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libdrm | DISTRO | https://release-monitoring.org/project/01596 | 2.4.112 | 2.4.113 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221009-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libgee | DISTRO | https://release-monitoring.org/project/01625 | 0.20.5 | 0.20.6 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.0 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.1 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.16 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libidn2 | DISTRO | https://release-monitoring.org/project/05597 | 2.3.3 | 2.3.4 | libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libkcapi | DISTRO | https://release-monitoring.org/project/16828 | 1.1.5 | 1.4.0 | ORPH libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH liblinear | DISTRO | https://release-monitoring.org/project/21363 | 2.44 | 2.45 | libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmhash | DISTRO | https://release-monitoring.org/project/21488 | 0.9.9.9 | 1.4 | ORPH libminiupnpc | DISTRO | https://release-monitoring.org/project/01986 | 2.2.3 | 2.2.4 | libmodbus | DISTRO | https://release-monitoring.org/project/09728 | 3.1.7 | 3.1.8 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnl | DISTRO | https://release-monitoring.org/project/01684 | 3.6.0 | 3.7.0 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libpagekite | DISTRO | https://release-monitoring.org/project/21366 | 0.91.190530 | 0.91.201110 | libpam-radius-auth | DISTRO | https://release-monitoring.org/project/57834 | 1.4.0 | 2.0.0 | ORPH libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpfm4 | DISTRO | https://release-monitoring.org/project/21491 | 4.11.0 | 4.12.0 | libpng | DISTRO | https://release-monitoring.org/project/01705 | 1.6.37 | 1.6.38 | libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libshout | DISTRO | https://release-monitoring.org/project/11084 | 2.4.5 | 2.4.6 | ORPH libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libssh | DISTRO | https://release-monitoring.org/project/01729 | 0.9.6 | 0.10.4 | ORPH libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.7 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlpp | DISTRO | https://release-monitoring.org/project/11129 | 5.0.1 | 5.0.2 | ORPH libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | libzlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | ORPH lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | lirc-tools | DISTRO | https://release-monitoring.org/project/10762 | 0.10.1 | 0.10.2 | ORPH live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | lldpd | DISTRO | https://release-monitoring.org/project/14019 | 1.0.9 | 1.0.15 | ORPH llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lsof | DISTRO | https://release-monitoring.org/project/01844 | 4.96.3 | 4.96.4 | ORPH ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-lyaml | DISTRO | https://release-monitoring.org/project/11733 | 6.2.7 | 6.2.8 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lv2 | DISTRO | https://release-monitoring.org/project/230934 | 1.18.2 | 1.18.10 | lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lz4 | DISTRO | https://release-monitoring.org/project/01865 | 1.9.3 | 1.9.4 | ORPH lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH makedumpfile | DISTRO | https://release-monitoring.org/project/131396 | 1.7.0 | 1.7.2 | mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH matio | DISTRO | https://release-monitoring.org/project/01893 | 1.5.22 | 1.5.23 | mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mbuffer | DISTRO | https://release-monitoring.org/project/15518 | 20211018 | 20220418 | mcelog | DISTRO | https://release-monitoring.org/project/08093 | 187 | 189 | mdevd | DISTRO | https://release-monitoring.org/project/16553 | 0.1.4.0 | 0.1.6.0 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.66 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH mesa3d | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.2 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | mesa3d-headers | DISTRO | https://release-monitoring.org/project/01970 | 22.1.6 | 22.2.2 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | minissdpd | DISTRO | https://release-monitoring.org/project/57838 | 1.5.20211105 | 1.6.0 | minizip | DISTRO | https://release-monitoring.org/project/17546 | 3.0.6 | 10.2 | minizip-zlib | DISTRO | https://release-monitoring.org/project/05303 | 1.2.12 | 1.2.13 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.5 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | mongoose | DISTRO | https://release-monitoring.org/project/07603 | 7.2 | 7.8 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.30.2 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtd | DISTRO | https://release-monitoring.org/project/02026 | 2.1.3 | 2.1.5 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.42 | mtr | DISTRO | https://release-monitoring.org/project/02029 | 0.94 | 0.95 | ORPH multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.1 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | mxml | DISTRO | https://release-monitoring.org/project/13545 | 3.3 | 3.3.1 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.2 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221008 | ORPH ndisc6 | DISTRO | https://release-monitoring.org/project/21531 | 1.0.5 | 1.0.6 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 1.0.0 | netcat | DISTRO | https://release-monitoring.org/project/21534 | 0.7.1 | 1.219 | ORPH netcat-openbsd | DISTRO | https://release-monitoring.org/project/21534 | 1.218 | 1.219 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.2 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.2 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 19.0.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH numactl | DISTRO | https://release-monitoring.org/project/02507 | 2.0.14 | 2.0.16 | nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.1.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.4.4 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+20 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.66 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | paho-mqtt-c | DISTRO | https://release-monitoring.org/project/21375 | 1.3.10 | 1.3.11 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.15.0 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202210 | ORPH pcsc-lite | DISTRO | https://release-monitoring.org/project/02611 | 1.9.8 | 1.9.9 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.43 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-path-tiny | DISTRO | https://release-monitoring.org/project/11962 | 0.124 | 0.130 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pinentry | DISTRO | https://release-monitoring.org/project/03643 | 1.1.1 | 1.2.1 | ORPH pixman | DISTRO | https://release-monitoring.org/project/03648 | 0.40.0 | 0.42.0 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | poppler | DISTRO | https://release-monitoring.org/project/03686 | 21.12.0 | 22.10.0 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.1 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.8 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.77 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiofiles | DISTRO | https://release-monitoring.org/project/12743 | 0.8.0 | 22.1.0 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aiojobs | DISTRO | https://release-monitoring.org/project/21252 | 0.3.0 | 1.1.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-attrs | DISTRO | https://release-monitoring.org/project/15099 | 21.4.0 | 22.1.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.0 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.24.96 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.27.96 | python-bottle | DISTRO | https://release-monitoring.org/project/11101 | 0.12.21 | 0.12.23 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-certifi | DISTRO | https://release-monitoring.org/project/07995 | 2022.9.14 | 2022.9.24 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-charset-normalizer | DISTRO | https://release-monitoring.org/project/55366 | 2.1.1 | 3.0.0 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.5 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssutils | DISTRO | https://release-monitoring.org/project/13259 | 2.5.1 | 2.6.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daemon | DISTRO | https://release-monitoring.org/project/03816 | 2.2.3 | 2.3.2 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-distro | DISTRO | https://release-monitoring.org/project/12202 | 1.7.0 | 1.8.0 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.8 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-jsonrpc | DISTRO | https://release-monitoring.org/project/21698 | 2.2.1 | 2.2.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.9.24 | python-fonttools | DISTRO | https://release-monitoring.org/project/07388 | 4.37.3 | 4.38.0 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-greenlet | DISTRO | https://release-monitoring.org/project/06870 | 1.1.2 | 1.1.3.post0 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.20.4 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-jsonschema | DISTRO | https://release-monitoring.org/project/03898 | 4.5.1 | 4.16.0 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.6 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-maturin | DISTRO | https://release-monitoring.org/project/42653 | 0.13.5 | 0.13.6 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 9.0.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-numpy | DISTRO | https://release-monitoring.org/project/02509 | 1.21.2 | 1.23.4 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.2 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 0.98.9 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.0 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.11.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.6 | 21.8 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.3 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.4 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220814.1 | 20220916.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pydyf | DISTRO | https://release-monitoring.org/project/179112 | 0.3.0 | 0.5.0 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.10 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.6.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.1.3 | python-pytest-asyncio | DISTRO | https://release-monitoring.org/project/07273 | 0.19.0 | 0.20.1 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.5 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 19.0.2 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.9.13 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.0 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.3 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.10.1 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.2 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b2 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.0.1 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tinycss2 | DISTRO | https://release-monitoring.org/project/16655 | 1.1.1 | 1.2.1 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.5.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-typing-extensions | DISTRO | https://release-monitoring.org/project/19755 | 4.3.0 | 4.4.0 | python-ujson | DISTRO | https://release-monitoring.org/project/04076 | 5.2.0 | 5.5.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-weasyprint | DISTRO | https://release-monitoring.org/project/11057 | 56.1 | 57.0b1 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.3 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.2 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.2 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsync | DISTRO | https://release-monitoring.org/project/04217 | 3.2.5 | 3.2.7 | ORPH rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2210.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6 | DISTRO | https://release-monitoring.org/project/05485 | 2.10.0.3 | 2.11.1.2 | s6-dns | DISTRO | https://release-monitoring.org/project/16547 | 2.3.5.1 | 2.3.5.4 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | s6-linux-utils | DISTRO | https://release-monitoring.org/project/16551 | 2.5.1.5 | 2.6.0.0 | s6-networking | DISTRO | https://release-monitoring.org/project/16550 | 2.4.1.1 | 2.5.1.1 | s6-portable-utils | DISTRO | https://release-monitoring.org/project/16549 | 2.2.3.2 | 2.2.5.0 | s6-rc | DISTRO | https://release-monitoring.org/project/16548 | 0.5.2.2 | 0.5.3.2 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.7 | 4.17.1 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | sedutil | DISTRO | https://release-monitoring.org/project/15203 | 1.15.1 | 1.20.0 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-cli | DISTRO | https://release-monitoring.org/project/135642 | 1.59.0 | 2.7.0 | sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.2 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | skalibs | DISTRO | https://release-monitoring.org/project/05486 | 2.10.0.3 | 2.12.0.1 | slang | DISTRO | https://release-monitoring.org/project/04829 | 2.3.2 | 2.3.3 | ORPH smartmontools | DISTRO | https://release-monitoring.org/project/04835 | 7.2 | 7.3 | ORPH sngrep | DISTRO | https://release-monitoring.org/project/17075 | 1.4.7 | 1.6.0 | ORPH snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.43.0 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | sqlite | DISTRO | https://release-monitoring.org/project/04877 | 3.39.2 | 3.39.4 | squid | DISTRO | https://release-monitoring.org/project/04880 | 5.6 | 5.7 | ORPH sratom | DISTRO | https://release-monitoring.org/project/14903 | 0.6.8 | 0.6.14 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.11p3 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.3 | 0.30.0 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.6.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tealdeer | DISTRO | https://release-monitoring.org/project/84521 | 1.5.0 | 1.6.0 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.2 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.0 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uuu | DISTRO | https://release-monitoring.org/project/259328 | 1.4.243 | 1.5.4 | uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vim | DISTRO | https://release-monitoring.org/project/05092 | 9.0.0709 | 9.0.0814 | ORPH vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.1 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.5 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.231 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webkitgtk | DISTRO | https://release-monitoring.org/project/05355 | 2.38.0 | 2.38.1 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireguard-linux-compat | DISTRO | https://release-monitoring.org/project/62379 | 1.0.20211208 | 1.0.20220627 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.0 | ORPH wolftpm | DISTRO | https://release-monitoring.org/project/256219 | 2.4.0 | 2.6.0 | wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.0 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20220111 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xfsinfo | DISTRO | https://release-monitoring.org/project/17158 | 1.0.6 | 1.0.7 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xcb-util-cursor | DISTRO | https://release-monitoring.org/project/05166 | 0.1.3 | 0.1.4 | xcb-util-image | DISTRO | https://release-monitoring.org/project/05167 | 0.4.0 | 0.4.1 | xcb-util-keysyms | DISTRO | https://release-monitoring.org/project/05168 | 0.4.0 | 0.4.1 | xcb-util-renderutil | DISTRO | https://release-monitoring.org/project/05169 | 0.3.9 | 0.3.10 | xcb-util-wm | DISTRO | https://release-monitoring.org/project/05170 | 0.4.1 | 0.4.2 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xerces | DISTRO | https://release-monitoring.org/project/05182 | 3.2.3 | 3.2.4 | ORPH xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXmu | DISTRO | https://release-monitoring.org/project/01785 | 1.1.3 | 1.1.4 | xlib_libXrender | DISTRO | https://release-monitoring.org/project/01789 | 0.9.10 | 0.9.11 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xlib_libxkbfile | DISTRO | https://release-monitoring.org/project/01781 | 1.1.0 | 1.1.1 | xlib_libxshmfence | DISTRO | https://release-monitoring.org/project/01792 | 1.3 | 1.3.1 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 374 | ORPH yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | zsh | DISTRO | https://release-monitoring.org/project/05307 | 5.8.1 | 5.9 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From marcus.folkesson at gmail.com Mon Oct 24 05:47:40 2022 From: marcus.folkesson at gmail.com (Marcus Folkesson) Date: Mon, 24 Oct 2022 07:47:40 +0200 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture In-Reply-To: <20221011062647.741292-1-marcus.folkesson@gmail.com> References: <20221011062647.741292-1-marcus.folkesson@gmail.com> Message-ID: Bump Med v?nliga h?lsningar / Best regards Marcus Folkesson Den tis 11 okt. 2022 kl 08:26 skrev Marcus Folkesson < marcus.folkesson at gmail.com>: > libarchive is needed when building for s390x. > > Introduced in this patch: > c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify > initrd in SE case > > Fixes: > > http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ > > Signed-off-by: Marcus Folkesson > --- > package/libostree/Config.in | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/libostree/Config.in b/package/libostree/Config.in > index 14ae4da4c8..a36e12ddde 100644 > --- a/package/libostree/Config.in > +++ b/package/libostree/Config.in > @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE > # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() > depends on !BR2_TOOLCHAIN_USES_MUSL > select BR2_PACKAGE_E2FSPROGS > + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x > select BR2_PACKAGE_LIBGLIB2 > select BR2_PACKAGE_LIBGPG_ERROR > select BR2_PACKAGE_LIBGPGME > -- > 2.37.1 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at korsgaard.com Mon Oct 24 07:52:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 24 Oct 2022 09:52:53 +0200 Subject: [Buildroot] [PATCH] package/wireguard-linux-compat: bump version to 1.0.20220627 Message-ID: <20221024075253.3228016-1-peter@korsgaard.com> For details, see the announcement: https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html Signed-off-by: Peter Korsgaard --- package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.hash b/package/wireguard-linux-compat/wireguard-linux-compat.hash index 3072b66e92..0f5713fc34 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.hash +++ b/package/wireguard-linux-compat/wireguard-linux-compat.hash @@ -1,4 +1,4 @@ -# https://lists.zx2c4.com/pipermail/wireguard/2021-December/007369.html -sha256 c0e607138a17daac656f508d8e63ea3737b5221fa5d9288191ddeb099f5a3b92 wireguard-linux-compat-1.0.20211208.tar.xz +# https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html +sha256 362d412693c8fe82de00283435818d5c5def7f15e2433a07a9fe99d0518f63c0 wireguard-linux-compat-1.0.20220627.tar.xz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.mk b/package/wireguard-linux-compat/wireguard-linux-compat.mk index 44cc30f36e..258e184765 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.mk +++ b/package/wireguard-linux-compat/wireguard-linux-compat.mk @@ -4,7 +4,7 @@ # ################################################################################ -WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20211208 +WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20220627 WIREGUARD_LINUX_COMPAT_SITE = https://git.zx2c4.com/wireguard-linux-compat/snapshot WIREGUARD_LINUX_COMPAT_SOURCE = wireguard-linux-compat-$(WIREGUARD_LINUX_COMPAT_VERSION).tar.xz WIREGUARD_LINUX_COMPAT_LICENSE = GPL-2.0 -- 2.30.2 From sebastien.szymanski at armadeus.com Mon Oct 24 08:27:19 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Mon, 24 Oct 2022 10:27:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> Signed-off-by: S?bastien Szymanski --- package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools -- 2.37.4 From moritz at h6t.eu Mon Oct 24 09:15:12 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Mon, 24 Oct 2022 11:15:12 +0200 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: Am 22.10.22 um 00:57 schrieb James Hilliard: > On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: >> >> Am 21.10.22 um 18:41 schrieb James Hilliard: >>> On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: >>>> >>>> Am 20.10.22 um 00:12 schrieb James Hilliard: >>>> >>>>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot >>>>> wrote: >>>>>> From: Moritz Bitsch >>>>>> >>>>>> The cargo --release flag is used to create optimized builds, not supplying >>>>>> --release has major performance implications. > > Looking at this further the cargo --release flag merely tells cargo to use the > release profile rather than the dev profile, however the issue of optimizations > being enabled or not is really a matter of what the profile configuration is, > right now we are effectively choosing between the default release or default > dev profile configuration which does not properly match the build settings. > > Instead what we really want to do is configure all cargo profiles based on the > selected buildroot build settings. > > Unfortunately cargo doesn't have any env variable that selects a profile, but > we can sidestep this simply by configuring both root profiles(which other > profiles inherit from). > > I think the existing cargo build flags are fine, I sent a patch which should fix > the profile configurations so that they match the buildroot build settings, let > me know if this fixes the optimization issue for you: > https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ Thanks, for the detailed response. The mentioned patch works fine for my use case. I can reproduce the performance issue/improvement when switching between different optimization levels. >>>>> Is there an env variable we can use to set this instead? >>>>> >>>>> Some packages use cargo without the cargo infrastructure, for example >>>>> we have a number of pyo3(https://pyo3.rs/) based packages that use the >>>>> cargo env but not the cargo build commands from here. >>>> I could not find any env variable for switching profiles. >>>> >>>> I had a look at python-rtoml, and the used setuptools-rust: supplying >>>> --debug to >>>> the "setup.py build" removes the --release flag from the cargo invocation. >>> >>> Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, >>> we also have maturin which is pep517 based. >> >> I'm in no way a a python expert, so take my words with a grain of salt. >> >> I could not find a way to specify what build profile is used by maturin >> when in a pep517 build. Even if maturin supports the -r flag for release >> builds when called directly. > > I think the real issue is actually not that the wrong build profile is > being used > so much as the build profile configuration itself is wrong. After looking into some crates with different behavior when built in debug or release mode (for example rust-embed) I think that most of them check for enabled debug_assertions, which you handle in your patch. I think the conditional --release switch should be removed. Your patch is by far the more precise solution. >> >>> >>>>>> Signed-off-by: Moritz Bitsch >>>>>> --- >>>>>> package/pkg-cargo.mk | 2 +- >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk >>>>>> index f7e3f39503..e0556252fa 100644 >>>>>> --- a/package/pkg-cargo.mk >>>>>> +++ b/package/pkg-cargo.mk >>>>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS >>>>>> $$($(2)_CARGO_ENV) \ >>>>>> cargo build \ >>>>>> --offline \ >>>>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ >>>>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ >>>>>> --manifest-path Cargo.toml \ >>>>>> --locked \ >>>>>> $$($(2)_CARGO_BUILD_OPTS) >>>>>> -- >>>>>> 2.37.3 >>>>>> >>>>>> _______________________________________________ >>>>>> buildroot mailing list >>>>>> buildroot at buildroot.org >>>>>> https://lists.buildroot.org/mailman/listinfo/buildroot From fperrad at gmail.com Mon Oct 24 10:41:33 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:33 +0200 Subject: [Buildroot] [PATCH] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Message-ID: <20221024104133.1470655-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig index e325184e9..1bb628b56 100644 --- a/configs/olimex_a20_olinuxino_lime2_defconfig +++ b/configs/olimex_a20_olinuxino_lime2_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig index ba814b98b..7105ea996 100644 --- a/configs/olimex_a20_olinuxino_lime_defconfig +++ b/configs/olimex_a20_olinuxino_lime_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y -- 2.37.2 From fperrad at gmail.com Mon Oct 24 10:41:42 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:42 +0200 Subject: [Buildroot] [PATCH] configs/mx6cubox: bump Linux and U-Boot versions Message-ID: <20221024104142.1470677-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- configs/mx6cubox_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig index 86f506ef0..cbd937806 100644 --- a/configs/mx6cubox_defconfig +++ b/configs/mx6cubox_defconfig @@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15" @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi" BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y -- 2.37.2 From fperrad at gmail.com Mon Oct 24 10:41:50 2022 From: fperrad at gmail.com (Francois Perrad) Date: Mon, 24 Oct 2022 12:41:50 +0200 Subject: [Buildroot] [PATCH] package/sqlite: bump to version 3.39.4 Message-ID: <20221024104150.1470698-1-francois.perrad@gadz.org> Signed-off-by: Francois Perrad --- package/sqlite/sqlite.hash | 2 +- package/sqlite/sqlite.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sqlite/sqlite.hash b/package/sqlite/sqlite.hash index d5af2297f..936f42e8e 100644 --- a/package/sqlite/sqlite.hash +++ b/package/sqlite/sqlite.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 852be8a6183a17ba47cee0bbff7400b7aa5affd283bf3beefc34fcd088a239de sqlite-autoconf-3390200.tar.gz +sha256 f31d445b48e67e284cf206717cc170ab63cbe4fd7f79a82793b772285e78fdbb sqlite-autoconf-3390400.tar.gz sha256 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9 tea/license.terms diff --git a/package/sqlite/sqlite.mk b/package/sqlite/sqlite.mk index 01dbb153b..4f4164c37 100644 --- a/package/sqlite/sqlite.mk +++ b/package/sqlite/sqlite.mk @@ -4,8 +4,8 @@ # ################################################################################ -SQLITE_VERSION = 3.39.2 -SQLITE_TAR_VERSION = 3390200 +SQLITE_VERSION = 3.39.4 +SQLITE_TAR_VERSION = 3390400 SQLITE_SOURCE = sqlite-autoconf-$(SQLITE_TAR_VERSION).tar.gz SQLITE_SITE = https://www.sqlite.org/2022 SQLITE_LICENSE = Public domain -- 2.37.2 From neal.frager at amd.com Mon Oct 24 14:22:14 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:14 -0600 Subject: [Buildroot] [PATCH v1 1/3] add package/versal-firmware Message-ID: <20221024142216.31273-1-neal.frager@amd.com> This patch adds support for downloading versal microblaze firmware binaries. These are necessary for booting Xilinx versal devices. The location of these binaries is temporary, and will soon be added to the Xilinx firmware repository. The temporary location is using the same free distribution license as the Xilinx firmware repository. Once these files are available on the Xilinx repository, this package will be updated to the new location. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + package/Config.in | 1 + package/versal-firmware/Config.in | 22 ++++++++++++++++++ package/versal-firmware/versal-firmware.hash | 3 +++ package/versal-firmware/versal-firmware.mk | 24 ++++++++++++++++++++ 5 files changed, 51 insertions(+) create mode 100644 package/versal-firmware/Config.in create mode 100644 package/versal-firmware/versal-firmware.hash create mode 100644 package/versal-firmware/versal-firmware.mk diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..ed696f4cd0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2176,6 +2176,7 @@ F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig F: package/bootgen +F: package/versal-firmware N: Nicola Di Lieto F: package/uacme/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..0abf233940 100644 --- a/package/Config.in +++ b/package/Config.in @@ -441,6 +441,7 @@ menu "Firmware" source "package/sunxi-boards/Config.in" source "package/ts4900-fpga/Config.in" source "package/ux500-firmware/Config.in" + source "package/versal-firmware/Config.in" source "package/wilc-firmware/Config.in" source "package/wilink-bt-firmware/Config.in" source "package/zd1211-firmware/Config.in" diff --git a/package/versal-firmware/Config.in b/package/versal-firmware/Config.in new file mode 100644 index 0000000000..e184ba1925 --- /dev/null +++ b/package/versal-firmware/Config.in @@ -0,0 +1,22 @@ +config BR2_PACKAGE_VERSAL_FIRMWARE + bool "versal-firmware" + depends on BR2_aarch64 + help + Pre-built firmware files for Xilinx Versal boards. + + https://github.com/nealfrager/buildroot-firmware + +if BR2_PACKAGE_VERSAL_FIRMWARE + +config BR2_PACKAGE_VERSAL_FIRMWARE_VERSION + string "versal firmware version" + help + Release version of Versal firmware. + +config BR2_PACKAGE_VERSAL_FIRMWARE_BOARD + string "versal board name" + help + Name of Versal target board. + Used for installing the appropriate firmware boot.bin. + +endif # BR2_PACKAGE_VERSAL_FIRMWARE diff --git a/package/versal-firmware/versal-firmware.hash b/package/versal-firmware/versal-firmware.hash new file mode 100644 index 0000000000..7a8ea04c91 --- /dev/null +++ b/package/versal-firmware/versal-firmware.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 14c505cac0216637ab2d08590acffb4861446e480bdbf7417e699816048ab39b versal-firmware-v2022.2.tar.gz +sha256 f9796efcd98f47fb3e1d5d4c23e224613e91c70207b759a2087de368be50c315 LICENSE diff --git a/package/versal-firmware/versal-firmware.mk b/package/versal-firmware/versal-firmware.mk new file mode 100644 index 0000000000..35dfbaa512 --- /dev/null +++ b/package/versal-firmware/versal-firmware.mk @@ -0,0 +1,24 @@ +################################################################################ +# +# versal-firmware +# +################################################################################ + +VERSAL_FIRMWARE_VERSION = $(call qstrip,$(BR2_PACKAGE_VERSAL_FIRMWARE_VERSION)) +VERSAL_FIRMWARE_SITE = $(call github,nealfrager,buildroot-firmware,$(BR2_PACKAGE_VERSAL_FIRMWARE_VERSION)) +VERSAL_FIRMWARE_LICENSE = Xilinx-Binary-Only +VERSAL_FIRMWARE_LICENSE_FILES = LICENSE + +VERSAL_FIRMWARE_INSTALL_TARGET = NO +VERSAL_FIRMWARE_INSTALL_IMAGES = YES + +define VERSAL_FIRMWARE_INSTALL_IMAGES_CMDS + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_plm.elf \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_plm.elf + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_psmfw.elf \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_psmfw.elf + $(INSTALL) -D -m 0755 $(@D)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_vpl_gen_fixed.pdi \ + $(BINARIES_DIR)/$(BR2_PACKAGE_VERSAL_FIRMWARE_BOARD)_vpl_gen_fixed.pdi +endef + +$(eval $(generic-package)) -- 2.17.1 From neal.frager at amd.com Mon Oct 24 14:22:15 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:15 -0600 Subject: [Buildroot] [PATCH v1 2/3] add board/versal In-Reply-To: <20221024142216.31273-1-neal.frager@amd.com> References: <20221024142216.31273-1-neal.frager@amd.com> Message-ID: <20221024142216.31273-2-neal.frager@amd.com> This patch adds board support for generating images for versal boards. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + board/versal/genimage.cfg | 30 +++++++++++++++++ board/versal/post-build.sh | 16 +++++++++ board/versal/post-image.sh | 35 +++++++++++++++++++ board/versal/readme.txt | 54 ++++++++++++++++++++++++++++++ board/versal/vck190/uboot.fragment | 1 + 6 files changed, 137 insertions(+) create mode 100644 board/versal/genimage.cfg create mode 100755 board/versal/post-build.sh create mode 100755 board/versal/post-image.sh create mode 100644 board/versal/readme.txt create mode 100644 board/versal/vck190/uboot.fragment diff --git a/DEVELOPERS b/DEVELOPERS index ed696f4cd0..08095c9702 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2168,6 +2168,7 @@ F: package/pkg-qmake.mk F: package/qt5/qt5opcua/ N: Neal Frager +F: board/versal/ F: board/zynq/ F: board/zynqmp/ F: board/zynqmp/kria/ diff --git a/board/versal/genimage.cfg b/board/versal/genimage.cfg new file mode 100644 index 0000000000..d994d3a2bf --- /dev/null +++ b/board/versal/genimage.cfg @@ -0,0 +1,30 @@ +image boot.vfat { + vfat { + files = { + "boot.bin", + "system.dtb", + "Image" + } + file extlinux/extlinux.conf { + image = extlinux.conf + } + } + + size = 32M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/versal/post-build.sh b/board/versal/post-build.sh new file mode 100755 index 0000000000..0713bd1b05 --- /dev/null +++ b/board/versal/post-build.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +# genimage will need to find the extlinux.conf +# in the binaries directory + +BOARD_DIR="$(dirname $0)" +CONSOLE=$2 +ROOT=$3 + +mkdir -p "${BINARIES_DIR}" +cat <<-__HEADER_EOF > "${BINARIES_DIR}/extlinux.conf" + label linux + kernel /Image + devicetree /system.dtb + append console=${CONSOLE} root=/dev/${ROOT} rw rootwait + __HEADER_EOF diff --git a/board/versal/post-image.sh b/board/versal/post-image.sh new file mode 100755 index 0000000000..aad6813052 --- /dev/null +++ b/board/versal/post-image.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +# By default U-Boot loads DTB from a file named "system.dtb", so +# let's use a symlink with that name that points to the *first* +# devicetree listed in the config. + +FIRST_DT=$(sed -nr \ + -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/([-_/[:alnum:]\\.]*).*"$|\1|p' \ + ${BR2_CONFIG}) + +[ -z "${FIRST_DT}" ] || ln -fs ${FIRST_DT}.dtb ${BINARIES_DIR}/system.dtb + +BOARD_DIR="$(dirname $0)" +BOARD_NAME=$4 + +mkdir -p "${BINARIES_DIR}" +cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif" + the_ROM_image: + { + image { + { type=bootimage, file=${BINARIES_DIR}/${BOARD_NAME}_vpl_gen_fixed.pdi } + { type=bootloader, file=${BINARIES_DIR}/${BOARD_NAME}_plm.elf } + { core=psm, file=${BINARIES_DIR}/${BOARD_NAME}_psmfw.elf } + } + image { + id = 0x1c000000, name=apu_subsystem + { type=raw, load=0x00001000, file=${BINARIES_DIR}/system.dtb } + { core=a72-0, exception_level=el-3, trustzone, file=${BINARIES_DIR}/bl31.elf } + { core=a72-0, exception_level=el-2, file=${BINARIES_DIR}/u-boot } + } + } + __HEADER_EOF + +${HOST_DIR}/bin/bootgen -arch versal -image ${BINARIES_DIR}/bootgen.bif -o ${BINARIES_DIR}/boot.bin -w on +support/scripts/genimage.sh -c ${BOARD_DIR}/genimage.cfg diff --git a/board/versal/readme.txt b/board/versal/readme.txt new file mode 100644 index 0000000000..9f234be620 --- /dev/null +++ b/board/versal/readme.txt @@ -0,0 +1,54 @@ +****************************************** +Xilinx VCK190 board - Versal +****************************************** + +This document describes the Buildroot support for the VCK190 +board by Xilinx, based on Versal. It has been tested with the +VCK190 production board. + +Evaluation board features can be found here with the link below. + +VCK190: +https://www.xilinx.com/products/boards-and-kits/vck190.html + + +How to build it +=============== + +Configure Buildroot: + + $ make versal_vck190_defconfig + +Compile everything and build the rootfs image: + + $ make + +Result of the build +------------------- + +After building, you should get a tree like this: + + output/images/ + +-- boot.bin + +-- boot.vfat + +-- Image + +-- rootfs.ext2 + +-- rootfs.ext4 -> rootfs.ext2 + +-- sdcard.img + +-- system.dtb -> versal-vck190-rev1.1.dtb + `-- versal-vck190-rev1.1.dtb + +How to write the SD card +======================== + +WARNING! This will destroy all the card content. Use with care! + +The sdcard.img file is a complete bootable image ready to be written +on the boot medium. To install it, simply copy the image to an SD +card: + + # dd if=output/images/sdcard.img of=/dev/sdX + +Where 'sdX' is the device node of the SD. + +Eject the SD card, insert it in the board, and power it up. diff --git a/board/versal/vck190/uboot.fragment b/board/versal/vck190/uboot.fragment new file mode 100644 index 0000000000..961c4239bd --- /dev/null +++ b/board/versal/vck190/uboot.fragment @@ -0,0 +1 @@ +CONFIG_DEFAULT_DEVICE_TREE="versal-vck190-rev1.1" -- 2.17.1 From neal.frager at amd.com Mon Oct 24 14:22:16 2022 From: neal.frager at amd.com (Neal Frager) Date: Mon, 24 Oct 2022 08:22:16 -0600 Subject: [Buildroot] [PATCH v1 3/3] add configs/versal_vck190_defconfig In-Reply-To: <20221024142216.31273-1-neal.frager@amd.com> References: <20221024142216.31273-1-neal.frager@amd.com> Message-ID: <20221024142216.31273-3-neal.frager@amd.com> This patch adds support for Xilinx Versal VCK190 evaluation board. VCK190 features can be found here: https://www.xilinx.com/products/boards-and-kits/vck190.html The VCK190 is based on the Xilinx Versal family: https://www.xilinx.com/products/silicon-devices/acap/versal.html The VC1902 included with the VCK190 evaluation board has Xilinx AI Engine acclerators designed for accelerating machine learning applications. Also included is an upgrade from prior Zynq and ZynqMP families to ARM Cortex-A72 cores. While the Linux kernel for Versal is quite similar to ZynqMP, the boot process has significantly changed. Triple-redundant MicroBlaze cores are used to boot and setup Versal devices. For this reason, current buildroot support will download pre-built firmware images and use Xilinx bootgen to generate the boot.bin for the vck190. Signed-off-by: Neal Frager --- DEVELOPERS | 1 + configs/versal_vck190_defconfig | 37 +++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 configs/versal_vck190_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 08095c9702..4634a957ae 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2172,6 +2172,7 @@ F: board/versal/ F: board/zynq/ F: board/zynqmp/ F: board/zynqmp/kria/ +F: configs/versal_vck190_defconfig F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig new file mode 100644 index 0000000000..d80dac8f4f --- /dev/null +++ b/configs/versal_vck190_defconfig @@ -0,0 +1,37 @@ +BR2_aarch64=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2 vck190" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx_versal" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vck190-rev1.1" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.6_2022.2)/xlnx_rebase_v2.6_2022.2.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/versal/vck190/uboot.fragment" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_ELF=y +BR2_PACKAGE_VERSAL_FIRMWARE=y +BR2_PACKAGE_VERSAL_FIRMWARE_VERSION="v2022.2" +BR2_PACKAGE_VERSAL_FIRMWARE_BOARD="vck190" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_BOOTGEN=y -- 2.17.1 From james.hilliard1 at gmail.com Mon Oct 24 16:38:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 24 Oct 2022 12:38:13 -0400 Subject: [Buildroot] [PATCH 1/2] package/pkg-cargo.mk: fix handling of runtime debug builds In-Reply-To: References: <20221019220019.8418-1-moritz@h6t.eu> <20221019220019.8418-2-moritz@h6t.eu> <1c451d96-4f2a-ed48-c7a0-ab83cb935361@h6t.eu> <8fee3b0b-e481-455b-5674-b152965b2525@h6t.eu> Message-ID: On Mon, Oct 24, 2022 at 5:15 AM Moritz Bitsch wrote: > > Am 22.10.22 um 00:57 schrieb James Hilliard: > > On Fri, Oct 21, 2022 at 5:04 PM Moritz Bitsch wrote: > >> > >> Am 21.10.22 um 18:41 schrieb James Hilliard: > >>> On Fri, Oct 21, 2022 at 2:48 AM Moritz Bitsch wrote: > >>>> > >>>> Am 20.10.22 um 00:12 schrieb James Hilliard: > >>>> > >>>>> On Wed, Oct 19, 2022 at 6:02 PM Moritz Bitsch via buildroot > >>>>> wrote: > >>>>>> From: Moritz Bitsch > >>>>>> > >>>>>> The cargo --release flag is used to create optimized builds, not supplying > >>>>>> --release has major performance implications. > > > > Looking at this further the cargo --release flag merely tells cargo to use the > > release profile rather than the dev profile, however the issue of optimizations > > being enabled or not is really a matter of what the profile configuration is, > > right now we are effectively choosing between the default release or default > > dev profile configuration which does not properly match the build settings. > > > > Instead what we really want to do is configure all cargo profiles based on the > > selected buildroot build settings. > > > > Unfortunately cargo doesn't have any env variable that selects a profile, but > > we can sidestep this simply by configuring both root profiles(which other > > profiles inherit from). > > > > I think the existing cargo build flags are fine, I sent a patch which should fix > > the profile configurations so that they match the buildroot build settings, let > > me know if this fixes the optimization issue for you: > > https://lore.kernel.org/buildroot/20221021224448.3502942-1-james.hilliard1 at gmail.com/ > > Thanks, for the detailed response. The mentioned patch works fine for my > use case. I can reproduce the performance issue/improvement when > switching between different optimization levels. Great, can you reply to that patch with a "Tested-by:" so that patchwork picks it up? > > >>>>> Is there an env variable we can use to set this instead? > >>>>> > >>>>> Some packages use cargo without the cargo infrastructure, for example > >>>>> we have a number of pyo3(https://pyo3.rs/) based packages that use the > >>>>> cargo env but not the cargo build commands from here. > >>>> I could not find any env variable for switching profiles. > >>>> > >>>> I had a look at python-rtoml, and the used setuptools-rust: supplying > >>>> --debug to > >>>> the "setup.py build" removes the --release flag from the cargo invocation. > >>> > >>> Hmm, there are two pyo3 build backends, only setuptools-rust uses setup.py, > >>> we also have maturin which is pep517 based. > >> > >> I'm in no way a a python expert, so take my words with a grain of salt. > >> > >> I could not find a way to specify what build profile is used by maturin > >> when in a pep517 build. Even if maturin supports the -r flag for release > >> builds when called directly. > > > > I think the real issue is actually not that the wrong build profile is > > being used > > so much as the build profile configuration itself is wrong. > > After looking into some crates with different behavior when built in > debug or release mode (for example rust-embed) I think that most of them > check for enabled debug_assertions, which you handle in your patch. There are still ways for cargo packages to potentially change behavior based on the selected profile even when the profile configurations are otherwise identical. > > I think the conditional --release switch should be removed. Your patch > is by far the more precise solution. I think we should probably still leave the --release switch as it's possible for cargo package build scripts to detect the configured profile using the PROFILE build script env variable which gets set by cargo: https://doc.rust-lang.org/cargo/reference/environment-variables.html#environment-variables-cargo-sets-for-build-scripts There's probably not many cases where this will matter but it does appear to be more correct to set the --release switch as well when possible. > > >> > >>> > >>>>>> Signed-off-by: Moritz Bitsch > >>>>>> --- > >>>>>> package/pkg-cargo.mk | 2 +- > >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>>>> > >>>>>> diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > >>>>>> index f7e3f39503..e0556252fa 100644 > >>>>>> --- a/package/pkg-cargo.mk > >>>>>> +++ b/package/pkg-cargo.mk > >>>>>> @@ -119,7 +119,7 @@ define $(2)_BUILD_CMDS > >>>>>> $$($(2)_CARGO_ENV) \ > >>>>>> cargo build \ > >>>>>> --offline \ > >>>>>> - $$(if $$(BR2_ENABLE_DEBUG),,--release) \ > >>>>>> + $$(if $$(BR2_ENABLE_RUNTIME_DEBUG),,--release) \ > >>>>>> --manifest-path Cargo.toml \ > >>>>>> --locked \ > >>>>>> $$($(2)_CARGO_BUILD_OPTS) > >>>>>> -- > >>>>>> 2.37.3 > >>>>>> > >>>>>> _______________________________________________ > >>>>>> buildroot mailing list > >>>>>> buildroot at buildroot.org > >>>>>> https://lists.buildroot.org/mailman/listinfo/buildroot From moritz at h6t.eu Mon Oct 24 17:43:09 2022 From: moritz at h6t.eu (Moritz Bitsch) Date: Mon, 24 Oct 2022 19:43:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/pkg-cargo: configure cargo profiles In-Reply-To: <20221021224448.3502942-1-james.hilliard1@gmail.com> References: <20221021224448.3502942-1-james.hilliard1@gmail.com> Message-ID: <4441102a-7b71-a4cf-9a9f-8122ebeaeb9b@h6t.eu> Am 22.10.22 um 00:44 schrieb James Hilliard: > The cargo profile flags currently only select a cargo build flag which > does not accurately reflect the configured build settings, setting the > cargo build flag also only works for packages using the cargo > infrastructure directly and not with other packages using the cargo > environment such as pyo3 based python packages(which indirectly invoke > cargo build via the setuptools-rust and maturn python build backends). > > To ensure that cargo uses the correct profile settings for the build > we need to set env variables for the two root profiles(dev/release) > based on the buildroot build settings. > > For reference the default cargo root profile settings are: > https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles > > As applications not using cargo infrastructure do not have a standard > way of configuring a specific build profile due to the selected > profile being determined by the cargo command line flags, the only > reliable way to configure profile settings is to set both root > profiles in the environment as this will ensure that they are used > regardless of which cargo build flag(such as --debug or --release) is > used. > > Cc: Moritz Bitsch > Signed-off-by: James Hilliard Tested-by: Moritz Bitsch > --- > package/pkg-cargo.mk | 100 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk > index f7e3f39503..4945770079 100644 > --- a/package/pkg-cargo.mk > +++ b/package/pkg-cargo.mk > @@ -46,6 +46,106 @@ PKG_CARGO_ENV = \ > CARGO_BUILD_TARGET="$(RUSTC_TARGET_NAME)" \ > CARGO_TARGET_$(call UPPERCASE,$(RUSTC_TARGET_NAME))_LINKER=$(notdir $(TARGET_CROSS))gcc > > +# We always set both CARGO_PROFILE_DEV and CARGO_PROFILE_RELEASE > +# as we are unable to select a build profile using the environment. > +# > +# Other cargo profiles generally derive from these two profiles. > + > +# Disable incremental compilation to match release default. > +# > +# Set codegen-units to release default. > +# > +# Set split-debuginfo to default off for ELF platforms. > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_INCREMENTAL="false" \ > + CARGO_PROFILE_RELEASE_INCREMENTAL="false" \ > + CARGO_PROFILE_DEV_CODEGEN_UNITS="16" \ > + CARGO_PROFILE_RELEASE_CODEGEN_UNITS="16" \ > + CARGO_PROFILE_DEV_SPLIT_DEBUGINFO="off" \ > + CARGO_PROFILE_RELEASE_SPLIT_DEBUGINFO="off" > + > +# Set the optimization level with the release default as fallback. > +ifeq ($(BR2_OPTIMIZE_0),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" > +else ifeq ($(BR2_OPTIMIZE_1),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="1" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="1" > +else ifeq ($(BR2_OPTIMIZE_2),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="2" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="2" > +else ifeq ($(BR2_OPTIMIZE_3),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +else ifeq ($(BR2_OPTIMIZE_G),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="0" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="0" > +else ifeq ($(BR2_OPTIMIZE_S),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="s" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="s" > +else ifeq ($(BR2_OPTIMIZE_FAST),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_OPT_LEVEL="3" \ > + CARGO_PROFILE_RELEASE_OPT_LEVEL="3" > +endif > + > +ifeq ($(BR2_ENABLE_LTO),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_LTO="true" \ > + CARGO_PROFILE_RELEASE_LTO="true" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_LTO="false" \ > + CARGO_PROFILE_RELEASE_LTO="false" > +endif > + > + > +ifeq ($(BR2_ENABLE_DEBUG),y) > +ifeq ($(BR2_DEBUG_3),y) > +# full debug info > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="2" \ > + CARGO_PROFILE_RELEASE_DEBUG="2" > +else > +# line tables only > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="1" \ > + CARGO_PROFILE_RELEASE_DEBUG="1" > +endif > +else > +# no debug info > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG="0" \ > + CARGO_PROFILE_RELEASE_DEBUG="0" > +endif > + > +# Enabling debug-assertions enables the runtime debug_assert! macro. > +# > +# Enabling overflow-checks enables runtime panic on integer overflow. > +ifeq ($(BR2_ENABLE_RUNTIME_DEBUG),y) > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="true" \ > + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="true" \ > + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="true" \ > + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="true" > +else > +PKG_CARGO_ENV += \ > + CARGO_PROFILE_DEV_DEBUG_ASSERTIONS="false" \ > + CARGO_PROFILE_RELEASE_DEBUG_ASSERTIONS="false" \ > + CARGO_PROFILE_DEV_OVERFLOW_CHECKS="false" \ > + CARGO_PROFILE_RELEASE_OVERFLOW_CHECKS="false" > +endif > + > # > # This is a workaround for https://github.com/rust-lang/compiler-builtins/issues/420 > # and should be removed when fixed upstream From Alexey.Brodkin at synopsys.com Mon Oct 24 17:49:11 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Mon, 24 Oct 2022 19:49:11 +0200 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS Message-ID: <20221024174911.75444-1-abrodkin@synopsys.com> In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") we opted-out from unconditional linking with "-latomic" and made it a conditional based on real availability of __atomic_fetch_and_1() in the toolchain. I.e. for many targets "-latomic" was not used any longer. And in those supposedly rare cases when libatomic was required it was all OK until there's a LD_LIBRARY_PATH set with something where yet another libatomic.so instance exists, especially if that's the one from host (in my case I used a separately built host toolchain). Then we see: ---------------------->8----------------------- /bin/sh ./libtool --tag=CC --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o -latomic libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format collect2: error: ld returned 1 exit status ---------------------->8----------------------- That happens because libtool of numactl adds contents of the aforementioned LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it finds becomes the one used for linking. What's more our precios cross-built libatomic.so never even gets considered because that first found libatomic.so is used with full path, not as "-latomic" as otherwise it would have been used without helpful libtool. But with paths pointing to the staging location, these paths get added to "$searchdirs" and so the right libatomic.so gets found, which solves our problem. Signed-off-by: Alexey Brodkin --- package/numactl/numactl.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..58b304d6e1 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -10,6 +10,7 @@ NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = README.md NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES -NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ + LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" $(eval $(autotools-package)) -- 2.16.2 From ju.o at free.fr Mon Oct 24 19:54:36 2022 From: ju.o at free.fr (Julien Olivain) Date: Mon, 24 Oct 2022 21:54:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-distro: bump to version 1.8.0 Message-ID: <20221024195436.409490-1-ju.o@free.fr> Also adds md5 file hash published on: https://pypi.org/pypi/distro/json For change log since 1.7.0, see: https://github.com/python-distro/distro/releases/tag/v1.8.0 Most notable change is the upstream support for Buildroot (included in python module docs and tests). Signed-off-by: Julien Olivain --- Tested on commit bd6e792 with commands: make check-package ... 0 warnings generated support/testing/run-tests \ -d dl \ -o output_folder \ tests.package.test_python_distro.TestPythonPy3Distro ... OK --- package/python-distro/python-distro.hash | 4 +++- package/python-distro/python-distro.mk | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/package/python-distro/python-distro.hash b/package/python-distro/python-distro.hash index 8f09197156..3d3e4258de 100644 --- a/package/python-distro/python-distro.hash +++ b/package/python-distro/python-distro.hash @@ -1,3 +1,5 @@ +# From https://pypi.org/pypi/distro/json +md5 a1e81972bbcfc0dc77dd0cde590c22a6 distro-1.8.0.tar.gz +sha256 02e111d1dc6a50abb8eed6bf31c3e48ed8b0830d1ea2a1b78c61765c2513fdd8 distro-1.8.0.tar.gz # Locally computed -sha256 151aeccf60c216402932b52e40ee477a939f8d58898927378a02abbe852c1c39 distro-1.7.0.tar.gz sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-distro/python-distro.mk b/package/python-distro/python-distro.mk index c69849b7ac..e079d8e265 100644 --- a/package/python-distro/python-distro.mk +++ b/package/python-distro/python-distro.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DISTRO_VERSION = 1.7.0 -PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/b5/7e/ddfbd640ac9a82e60718558a3de7d5988a7d4648385cf00318f60a8b073a +PYTHON_DISTRO_VERSION = 1.8.0 +PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/4b/89/eaa3a3587ebf8bed93e45aa79be8c2af77d50790d15b53f6dfc85b57f398 PYTHON_DISTRO_SOURCE = distro-$(PYTHON_DISTRO_VERSION).tar.gz PYTHON_DISTRO_LICENSE = Apache-2.0 PYTHON_DISTRO_LICENSE_FILES = LICENSE -- 2.38.1 From james.hilliard1 at gmail.com Mon Oct 24 20:04:06 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 24 Oct 2022 14:04:06 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-daemon: bump to version 2.3.2 Message-ID: <20221024200406.2266871-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-daemon/python-daemon.hash | 4 ++-- package/python-daemon/python-daemon.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-daemon/python-daemon.hash b/package/python-daemon/python-daemon.hash index 4f53902d3f..005a969207 100644 --- a/package/python-daemon/python-daemon.hash +++ b/package/python-daemon/python-daemon.hash @@ -1,6 +1,6 @@ # md5, sha256 https://pypi.org/pypi/python-daemon/json -md5 3ab10a93472201214cd95c05f1923af6 python-daemon-2.2.3.tar.gz -sha256 affeca9e5adfce2666a63890af9d6aff79f670f7511899edaddca7f96593cc25 python-daemon-2.2.3.tar.gz +md5 b7397fe73d516dc14921500a1245b41c python-daemon-2.3.2.tar.gz +sha256 3deeb808e72b6b89f98611889e11cc33754f5b2c1517ecfa1aaf25f402051fb5 python-daemon-2.3.2.tar.gz # Locally computed sha256 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE.ASF-2 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL-3 diff --git a/package/python-daemon/python-daemon.mk b/package/python-daemon/python-daemon.mk index 600ccf5bf1..aa8019f4be 100644 --- a/package/python-daemon/python-daemon.mk +++ b/package/python-daemon/python-daemon.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DAEMON_VERSION = 2.2.3 -PYTHON_DAEMON_SITE = https://pypi.python.org/packages/source/p/python-daemon +PYTHON_DAEMON_VERSION = 2.3.2 +PYTHON_DAEMON_SITE = https://files.pythonhosted.org/packages/d9/3c/727b06abb46fead341a2bdad04ba4a4db5395c44c45d8ba0aa82b517e462 PYTHON_DAEMON_LICENSE = Apache-2.0 (library), GPL-3.0+ (test, build) PYTHON_DAEMON_LICENSE_FILES = LICENSE.ASF-2 LICENSE.GPL-3 PYTHON_DAEMON_SETUP_TYPE = setuptools -- 2.34.1 From bugzilla at busybox.net Mon Oct 24 20:09:42 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 24 Oct 2022 20:09:42 +0000 Subject: [Buildroot] [Bug 14841] support/download/git fails with "fatal: No such remote 'origin'" due to incorrect check for origin remote In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14841 --- Comment #4 from Emil Medve --- Newer versions of `git` will expose this issue: ```bash $ git --version git version 2.37.2 $ git init Initialized empty Git repository in .../.git/ $ cat .git/config [core] repositoryformatversion = 0 filemode = true bare = false logallrefupdates = true $ git remote -v origin ``` -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Mon Oct 24 20:10:22 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Mon, 24 Oct 2022 20:10:22 +0000 Subject: [Buildroot] [Bug 14841] support/download/git fails with "fatal: No such remote 'origin'" due to incorrect check for origin remote In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14841 Emil Medve changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WORKSFORME |--- -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Mon Oct 24 20:14:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:14:28 +0200 Subject: [Buildroot] [git commit] package/sqlite: bump to version 3.39.4 Message-ID: <20221024204141.DB03886FB7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c6f17bf1bf8d7bae46b997cc1cc1f21fdf6eb5fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/sqlite/sqlite.hash | 2 +- package/sqlite/sqlite.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/sqlite/sqlite.hash b/package/sqlite/sqlite.hash index d5af2297f4..936f42e8e9 100644 --- a/package/sqlite/sqlite.hash +++ b/package/sqlite/sqlite.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 852be8a6183a17ba47cee0bbff7400b7aa5affd283bf3beefc34fcd088a239de sqlite-autoconf-3390200.tar.gz +sha256 f31d445b48e67e284cf206717cc170ab63cbe4fd7f79a82793b772285e78fdbb sqlite-autoconf-3390400.tar.gz sha256 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9 tea/license.terms diff --git a/package/sqlite/sqlite.mk b/package/sqlite/sqlite.mk index 01dbb153bc..4f4164c374 100644 --- a/package/sqlite/sqlite.mk +++ b/package/sqlite/sqlite.mk @@ -4,8 +4,8 @@ # ################################################################################ -SQLITE_VERSION = 3.39.2 -SQLITE_TAR_VERSION = 3390200 +SQLITE_VERSION = 3.39.4 +SQLITE_TAR_VERSION = 3390400 SQLITE_SOURCE = sqlite-autoconf-$(SQLITE_TAR_VERSION).tar.gz SQLITE_SITE = https://www.sqlite.org/2022 SQLITE_LICENSE = Public domain From thomas.petazzoni at bootlin.com Mon Oct 24 20:55:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:55:34 +0200 Subject: [Buildroot] [PATCH] package/sqlite: bump to version 3.39.4 In-Reply-To: <20221024104150.1470698-1-francois.perrad@gadz.org> References: <20221024104150.1470698-1-francois.perrad@gadz.org> Message-ID: <20221024225534.53c42f53@windsurf> On Mon, 24 Oct 2022 12:41:50 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > package/sqlite/sqlite.hash | 2 +- > package/sqlite/sqlite.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:56:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:56:39 +0200 Subject: [Buildroot] [git commit] configs/mx6cubox: bump Linux and U-Boot versions Message-ID: <20221024205654.9D2C786FC9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=21c4dd227040718013818a5fef6cb4de9e9ced6b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- configs/mx6cubox_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig index 86f506ef0a..cbd9378064 100644 --- a/configs/mx6cubox_defconfig +++ b/configs/mx6cubox_defconfig @@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15" @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi" BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:00 +0200 Subject: [Buildroot] [PATCH] configs/mx6cubox: bump Linux and U-Boot versions In-Reply-To: <20221024104142.1470677-1-francois.perrad@gadz.org> References: <20221024104142.1470677-1-francois.perrad@gadz.org> Message-ID: <20221024225700.5e711e67@windsurf> On Mon, 24 Oct 2022 12:41:42 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > configs/mx6cubox_defconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:19 +0200 Subject: [Buildroot] [PATCH] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot In-Reply-To: <20221024104133.1470655-1-francois.perrad@gadz.org> References: <20221024104133.1470655-1-francois.perrad@gadz.org> Message-ID: <20221024225719.1e2ba639@windsurf> On Mon, 24 Oct 2022 12:41:33 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- > configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 20:57:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 22:57:10 +0200 Subject: [Buildroot] [git commit] configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Message-ID: <20221024205823.B6F8586FCE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0465ad54f290635f599361d00a9f601ace19416e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- configs/olimex_a20_olinuxino_lime2_defconfig | 4 ++-- configs/olimex_a20_olinuxino_lime_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig index e325184e9e..1bb628b56b 100644 --- a/configs/olimex_a20_olinuxino_lime2_defconfig +++ b/configs/olimex_a20_olinuxino_lime2_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig index ba814b98b8..7105ea9962 100644 --- a/configs/olimex_a20_olinuxino_lime_defconfig +++ b/configs/olimex_a20_olinuxino_lime_defconfig @@ -22,7 +22,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.71" BR2_LINUX_KERNEL_USE_DEFCONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" @@ -44,7 +44,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y From thomas.petazzoni at bootlin.com Mon Oct 24 21:00:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:00:29 +0200 Subject: [Buildroot] [git commit] package/python-distro: bump to version 1.8.0 Message-ID: <20221024210131.949BF86FD5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=325a354234594fdcf557c6fa3db75976acfde4bd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Also adds md5 file hash published on: https://pypi.org/pypi/distro/json For change log since 1.7.0, see: https://github.com/python-distro/distro/releases/tag/v1.8.0 Most notable change is the upstream support for Buildroot (included in python module docs and tests). Signed-off-by: Julien Olivain Signed-off-by: Thomas Petazzoni --- package/python-distro/python-distro.hash | 4 +++- package/python-distro/python-distro.mk | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/package/python-distro/python-distro.hash b/package/python-distro/python-distro.hash index 8f09197156..3d3e4258de 100644 --- a/package/python-distro/python-distro.hash +++ b/package/python-distro/python-distro.hash @@ -1,3 +1,5 @@ +# From https://pypi.org/pypi/distro/json +md5 a1e81972bbcfc0dc77dd0cde590c22a6 distro-1.8.0.tar.gz +sha256 02e111d1dc6a50abb8eed6bf31c3e48ed8b0830d1ea2a1b78c61765c2513fdd8 distro-1.8.0.tar.gz # Locally computed -sha256 151aeccf60c216402932b52e40ee477a939f8d58898927378a02abbe852c1c39 distro-1.7.0.tar.gz sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-distro/python-distro.mk b/package/python-distro/python-distro.mk index c69849b7ac..e079d8e265 100644 --- a/package/python-distro/python-distro.mk +++ b/package/python-distro/python-distro.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DISTRO_VERSION = 1.7.0 -PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/b5/7e/ddfbd640ac9a82e60718558a3de7d5988a7d4648385cf00318f60a8b073a +PYTHON_DISTRO_VERSION = 1.8.0 +PYTHON_DISTRO_SITE = https://files.pythonhosted.org/packages/4b/89/eaa3a3587ebf8bed93e45aa79be8c2af77d50790d15b53f6dfc85b57f398 PYTHON_DISTRO_SOURCE = distro-$(PYTHON_DISTRO_VERSION).tar.gz PYTHON_DISTRO_LICENSE = Apache-2.0 PYTHON_DISTRO_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Mon Oct 24 21:01:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:01:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-distro: bump to version 1.8.0 In-Reply-To: <20221024195436.409490-1-ju.o@free.fr> References: <20221024195436.409490-1-ju.o@free.fr> Message-ID: <20221024230135.2df13e3d@windsurf> On Mon, 24 Oct 2022 21:54:36 +0200 Julien Olivain wrote: > Also adds md5 file hash published on: > https://pypi.org/pypi/distro/json > > For change log since 1.7.0, see: > https://github.com/python-distro/distro/releases/tag/v1.8.0 > > Most notable change is the upstream support for Buildroot > (included in python module docs and tests). > > Signed-off-by: Julien Olivain > --- > Tested on commit bd6e792 with commands: Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:02:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:02:06 +0200 Subject: [Buildroot] [git commit] package/python-daemon: bump to version 2.3.2 Message-ID: <20221024210245.C1ABA86FDD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=232ebbe3ab35861d8170ee11bc178338b6931132 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-daemon/python-daemon.hash | 4 ++-- package/python-daemon/python-daemon.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-daemon/python-daemon.hash b/package/python-daemon/python-daemon.hash index 4f53902d3f..005a969207 100644 --- a/package/python-daemon/python-daemon.hash +++ b/package/python-daemon/python-daemon.hash @@ -1,6 +1,6 @@ # md5, sha256 https://pypi.org/pypi/python-daemon/json -md5 3ab10a93472201214cd95c05f1923af6 python-daemon-2.2.3.tar.gz -sha256 affeca9e5adfce2666a63890af9d6aff79f670f7511899edaddca7f96593cc25 python-daemon-2.2.3.tar.gz +md5 b7397fe73d516dc14921500a1245b41c python-daemon-2.3.2.tar.gz +sha256 3deeb808e72b6b89f98611889e11cc33754f5b2c1517ecfa1aaf25f402051fb5 python-daemon-2.3.2.tar.gz # Locally computed sha256 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE.ASF-2 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL-3 diff --git a/package/python-daemon/python-daemon.mk b/package/python-daemon/python-daemon.mk index 600ccf5bf1..aa8019f4be 100644 --- a/package/python-daemon/python-daemon.mk +++ b/package/python-daemon/python-daemon.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_DAEMON_VERSION = 2.2.3 -PYTHON_DAEMON_SITE = https://pypi.python.org/packages/source/p/python-daemon +PYTHON_DAEMON_VERSION = 2.3.2 +PYTHON_DAEMON_SITE = https://files.pythonhosted.org/packages/d9/3c/727b06abb46fead341a2bdad04ba4a4db5395c44c45d8ba0aa82b517e462 PYTHON_DAEMON_LICENSE = Apache-2.0 (library), GPL-3.0+ (test, build) PYTHON_DAEMON_LICENSE_FILES = LICENSE.ASF-2 LICENSE.GPL-3 PYTHON_DAEMON_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Mon Oct 24 21:02:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:02:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-daemon: bump to version 2.3.2 In-Reply-To: <20221024200406.2266871-1-james.hilliard1@gmail.com> References: <20221024200406.2266871-1-james.hilliard1@gmail.com> Message-ID: <20221024230242.7939ed77@windsurf> On Mon, 24 Oct 2022 14:04:06 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-daemon/python-daemon.hash | 4 ++-- > package/python-daemon/python-daemon.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:03:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:03:29 +0200 Subject: [Buildroot] [git commit] package/wireguard-linux-compat: bump version to 1.0.20220627 Message-ID: <20221024210410.AAFB086FE4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fe56cf24b649b5e87d7a9e5a1c3c23d7740fa3f6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For details, see the announcement: https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html Signed-off-by: Peter Korsgaard Signed-off-by: Thomas Petazzoni --- package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.hash b/package/wireguard-linux-compat/wireguard-linux-compat.hash index 3072b66e92..0f5713fc34 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.hash +++ b/package/wireguard-linux-compat/wireguard-linux-compat.hash @@ -1,4 +1,4 @@ -# https://lists.zx2c4.com/pipermail/wireguard/2021-December/007369.html -sha256 c0e607138a17daac656f508d8e63ea3737b5221fa5d9288191ddeb099f5a3b92 wireguard-linux-compat-1.0.20211208.tar.xz +# https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html +sha256 362d412693c8fe82de00283435818d5c5def7f15e2433a07a9fe99d0518f63c0 wireguard-linux-compat-1.0.20220627.tar.xz # Locally calculated sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wireguard-linux-compat/wireguard-linux-compat.mk b/package/wireguard-linux-compat/wireguard-linux-compat.mk index 44cc30f36e..258e184765 100644 --- a/package/wireguard-linux-compat/wireguard-linux-compat.mk +++ b/package/wireguard-linux-compat/wireguard-linux-compat.mk @@ -4,7 +4,7 @@ # ################################################################################ -WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20211208 +WIREGUARD_LINUX_COMPAT_VERSION = 1.0.20220627 WIREGUARD_LINUX_COMPAT_SITE = https://git.zx2c4.com/wireguard-linux-compat/snapshot WIREGUARD_LINUX_COMPAT_SOURCE = wireguard-linux-compat-$(WIREGUARD_LINUX_COMPAT_VERSION).tar.xz WIREGUARD_LINUX_COMPAT_LICENSE = GPL-2.0 From thomas.petazzoni at bootlin.com Mon Oct 24 21:04:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:04:11 +0200 Subject: [Buildroot] [PATCH] package/wireguard-linux-compat: bump version to 1.0.20220627 In-Reply-To: <20221024075253.3228016-1-peter@korsgaard.com> References: <20221024075253.3228016-1-peter@korsgaard.com> Message-ID: <20221024230411.5430f6c0@windsurf> On Mon, 24 Oct 2022 09:52:53 +0200 Peter Korsgaard wrote: > For details, see the announcement: > https://lists.zx2c4.com/pipermail/wireguard/2022-June/007660.html > > Signed-off-by: Peter Korsgaard > --- > package/wireguard-linux-compat/wireguard-linux-compat.hash | 4 ++-- > package/wireguard-linux-compat/wireguard-linux-compat.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:05:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:05:32 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 In-Reply-To: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> References: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> Message-ID: <20221024230532.438bb514@windsurf> On Mon, 24 Oct 2022 10:27:19 +0200 S?bastien Szymanski wrote: > Signed-off-by: S?bastien Szymanski > --- > package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- > package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Thanks for the patch, but did you test it? The 0001-Move-pytest-runner-to-tests_require.patch patch no longer applies: >>> python-flask-jsonrpc 2.2.2 Extracting gzip -d -c /home/thomas/dl/python-flask-jsonrpc/Flask-JSONRPC-2.2.2.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2 -xf - >>> python-flask-jsonrpc 2.2.2 Patching Applying 0001-Move-pytest-runner-to-tests_require.patch using patch: patching file setup.py Hunk #1 FAILED at 42. 1 out of 1 hunk FAILED -- saving rejects to file setup.py.rej make: *** [package/pkg-generic.mk:251: /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2/.stamp_patched] Error 1 Could you have a look? Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:11:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:11:04 +0200 Subject: [Buildroot] [git commit] package/rtl8723bu: fix build failure on PowerPC Message-ID: <20221024211145.AF28886FEB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9833f110bb7e2b85a362f8c49246ea7349a36bcb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add local patch(pending upstream[0]) to fix build failure with PowerPC due to a package re-defition of get_ra() that is only defined in Linux PowerPC implementation. [0]: https://github.com/lwfinger/rtl8723bu/pull/192 Fixes: http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- ...Fix-build-failure-on-PowerPc-architecture.patch | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch new file mode 100644 index 0000000000..06cf2d64c1 --- /dev/null +++ b/package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch @@ -0,0 +1,47 @@ +From dde7bddfddddb7212f2d9671391e2096d770c449 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Sun, 23 Oct 2022 22:57:41 +0200 +Subject: [PATCH] Fix build failure on PowerPc architecture + +In PowerPc Linux only get_ra() exists[0] and conflicts with local get_ra() +that has a completely different purpose. So let's rename local get_ra() +to wifi_get_ra() to make it different from Linux's get_ra(). + +[0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/include/asm/disassemble.h#n49 + +Upstream: https://github.com/lwfinger/rtl8723bu/pull/192 +Signed-off-by: Giulio Benetti +--- + hal/rtl8723bu_recv.c | 2 +- + include/wifi.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/hal/rtl8723bu_recv.c b/hal/rtl8723bu_recv.c +index a2fc82b..39e5044 100644 +--- a/hal/rtl8723bu_recv.c ++++ b/hal/rtl8723bu_recv.c +@@ -288,7 +288,7 @@ void update_recvframe_phyinfo( + !pattrib->icv_err && !pattrib->crc_err && + _rtw_memcmp(get_hdr_bssid(wlanhdr), get_bssid(&padapter->mlmepriv), ETH_ALEN)); + +- pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); ++ pkt_info.bPacketToSelf = pkt_info.bPacketMatchBSSID && (_rtw_memcmp(wifi_get_ra(wlanhdr), myid(&padapter->eeprompriv), ETH_ALEN)); + + pkt_info.bPacketBeacon = pkt_info.bPacketMatchBSSID && (GetFrameSubType(wlanhdr) == WIFI_BEACON); + sa = get_ta(wlanhdr); +diff --git a/include/wifi.h b/include/wifi.h +index 5dc32eb..23578cc 100644 +--- a/include/wifi.h ++++ b/include/wifi.h +@@ -373,7 +373,7 @@ __inline static int IS_MCAST(unsigned char *da) + return _FALSE; + } + +-__inline static unsigned char * get_ra(unsigned char *pframe) ++__inline static unsigned char * wifi_get_ra(unsigned char *pframe) + { + unsigned char *ra; + ra = GetAddr1Ptr(pframe); +-- +2.34.1 + From thomas.petazzoni at bootlin.com Mon Oct 24 21:12:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:12:13 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc In-Reply-To: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> References: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> Message-ID: <20221024231213.41deaa35@windsurf> Hello Giulio, On Mon, 24 Oct 2022 00:14:25 +0200 Giulio Benetti wrote: > Add local patch(pending upstream[0]) to fix build failure with PowerPc due > to a package re-defition of get_ra() that is only defined in Linux PowerPc > implementation. > > [0]: https://github.com/lwfinger/rtl8723bu/pull/192 > > Fixes: > http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ > > Signed-off-by: Giulio Benetti > --- > ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch You forgot a reference to the upstream status of the patch in the patch itself, so I've added that when committing. Thanks a lot for looking into and fixing this build failure! Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:14:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:14:23 +0200 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS In-Reply-To: <20221024174911.75444-1-abrodkin@synopsys.com> References: <20221024174911.75444-1-abrodkin@synopsys.com> Message-ID: <20221024231423.24f384e3@windsurf> Hello Alexey, On Mon, 24 Oct 2022 19:49:11 +0200 Alexey Brodkin via buildroot wrote: > In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") > we opted-out from unconditional linking with "-latomic" and made it > a conditional based on real availability of __atomic_fetch_and_1() > in the toolchain. I.e. for many targets "-latomic" was not used > any longer. > > And in those supposedly rare cases when libatomic was required it was > all OK until there's a LD_LIBRARY_PATH set with something where yet > another libatomic.so instance exists, especially if that's the one from > host (in my case I used a separately built host toolchain). Then we see: > ---------------------->8----------------------- > /bin/sh ./libtool --tag=CC --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o -latomic > > libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 > .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format > collect2: error: ld returned 1 exit status > ---------------------->8----------------------- > > That happens because libtool of numactl adds contents of the aforementioned > LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it > finds becomes the one used for linking. What's more our precios cross-built > libatomic.so never even gets considered because that first found libatomic.so > is used with full path, not as "-latomic" as otherwise it would have been used > without helpful libtool. Thanks for the patch. However, I don't get it. Where is LD_LIBRARY_PATH defined? Do you have a reproducer for this issue? > +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ > + LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" This is really a red flag, $(STAGING_DIR)/lib is already in the default search path of the compiler, so that should never be needed. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 24 21:14:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:14:46 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: add missing ending slash Message-ID: <20221024211520.9C75F86FEF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3583e3f4013aca98e6360749c9d2154f6d699639 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This was missing in commit 08a0dea25f4e92ac5aa474876f706ddb9452fe2b ("package/bootgen: add bootgen host package") Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..6e0b765ba1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2175,7 +2175,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu102_defconfig F: configs/zynqmp_zcu106_defconfig F: configs/zynqmp_kria_kv260_defconfig -F: package/bootgen +F: package/bootgen/ N: Nicola Di Lieto F: package/uacme/ From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:27 +0200 Subject: [Buildroot] [git commit] package/libxmlpp: bump to version 5.0.2 Message-ID: <20221024214302.936288704A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=07197baadb40303afd543a0ed915cbdfb87e9e08 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libxmlpp/libxmlpp.hash | 4 ++-- package/libxmlpp/libxmlpp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxmlpp/libxmlpp.hash b/package/libxmlpp/libxmlpp.hash index 50238eff00..a974de57e3 100644 --- a/package/libxmlpp/libxmlpp.hash +++ b/package/libxmlpp/libxmlpp.hash @@ -1,5 +1,5 @@ -# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.1.sha256sum -sha256 15c38307a964fa6199f4da6683a599eb7e63cc89198545b36349b87cf9aa0098 libxml++-5.0.1.tar.xz +# From http://ftp.gnome.org/pub/GNOME/sources/libxml++/5.0/libxml++-5.0.2.sha256sum +sha256 7c17cc3e5a2214314dee5a1354f4b436f266ded6185232a0534f352a76240d5a libxml++-5.0.2.tar.xz # Hash for license file sha256 a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7 COPYING diff --git a/package/libxmlpp/libxmlpp.mk b/package/libxmlpp/libxmlpp.mk index 874577eb1f..3db711826e 100644 --- a/package/libxmlpp/libxmlpp.mk +++ b/package/libxmlpp/libxmlpp.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXMLPP_VERSION_MAJOR = 5.0 -LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).1 +LIBXMLPP_VERSION = $(LIBXMLPP_VERSION_MAJOR).2 LIBXMLPP_LICENSE = LGPL-2.1 (library), LGPL-2.0+ (examples) LIBXMLPP_LICENSE_FILES = COPYING LIBXMLPP_SOURCE = libxml++-$(LIBXMLPP_VERSION).tar.xz From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:28 +0200 Subject: [Buildroot] [git commit] package/libssh: bump to version 0.10.4 Message-ID: <20221024214302.9D2828704B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13596db789ead1ae68d3d53c298cbdb73e55cdfc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libssh/libssh.hash | 4 ++-- package/libssh/libssh.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libssh/libssh.hash b/package/libssh/libssh.hash index 4dbab11374..90bc4c82d8 100644 --- a/package/libssh/libssh.hash +++ b/package/libssh/libssh.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://www.libssh.org/files/0.9/libssh-0.9.6.tar.xz.asc +# https://www.libssh.org/files/0.10/libssh-0.10.4.tar.xz.asc # with key 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D -sha256 86bcf885bd9b80466fe0e05453c58b877df61afa8ba947a58c356d7f0fab829b libssh-0.9.6.tar.xz +sha256 07392c54ab61476288d1c1f0a7c557b50211797ad00c34c3af2bbc4dbc4bd97d libssh-0.10.4.tar.xz sha256 1656186e951db1c010a8485481fa94587f7e53a26d24976bef97945ad0c4df5a COPYING diff --git a/package/libssh/libssh.mk b/package/libssh/libssh.mk index 4cadf83aee..5deb64b82e 100644 --- a/package/libssh/libssh.mk +++ b/package/libssh/libssh.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBSSH_VERSION_MAJOR = 0.9 -LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).6 +LIBSSH_VERSION_MAJOR = 0.10 +LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).4 LIBSSH_SOURCE = libssh-$(LIBSSH_VERSION).tar.xz LIBSSH_SITE = https://www.libssh.org/files/$(LIBSSH_VERSION_MAJOR) LIBSSH_LICENSE = LGPL-2.1 From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:31 +0200 Subject: [Buildroot] [git commit] package/libpng: bump to version 1.6.38 Message-ID: <20221024214302.B013987048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6fa63bce3f95105220474c1bc6b940e8f2340546 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 1.6.38 [September 14, 2022] Added configurations and scripts for continuous integration. Fixed various errors in the handling of tRNS, hIST and eXIf. Implemented many stability improvements across all platforms. Updated the internal documentation. Update hash of LICENSE file (update in year with https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpng/libpng.hash | 10 +++++----- package/libpng/libpng.mk | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libpng/libpng.hash b/package/libpng/libpng.hash index b57b1251a0..34b0a8a8b6 100644 --- a/package/libpng/libpng.hash +++ b/package/libpng/libpng.hash @@ -1,6 +1,6 @@ -# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.37/ -md5 015e8e15db1eecde5f2eb9eb5b6e59e9 libpng-1.6.37.tar.xz -sha1 3ab93fabbf4c27e1c4724371df408d9a1bd3f656 libpng-1.6.37.tar.xz +# From https://sourceforge.net/projects/libpng/files/libpng16/1.6.38/ +md5 122e6b7837811698563083b352bc8ca2 libpng-1.6.38.tar.xz +sha1 60960ed110094843e5efa221df6a7d21614a4dba libpng-1.6.38.tar.xz # Locally computed: -sha256 505e70834d35383537b6491e7ae8641f1a4bed1876dbfe361201fc80868d88ca libpng-1.6.37.tar.xz -sha256 bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b LICENSE +sha256 b3683e8b8111ebf6f1ac004ebb6b0c975cd310ec469d98364388e9cedbfa68be libpng-1.6.38.tar.xz +sha256 dfe5a536b0e5a531f844fb9c101a3089aca60772a503893b8e15f9457e369960 LICENSE diff --git a/package/libpng/libpng.mk b/package/libpng/libpng.mk index e4e629bbb5..43b4f373f1 100644 --- a/package/libpng/libpng.mk +++ b/package/libpng/libpng.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPNG_VERSION = 1.6.37 +LIBPNG_VERSION = 1.6.38 LIBPNG_SERIES = 16 LIBPNG_SOURCE = libpng-$(LIBPNG_VERSION).tar.xz LIBPNG_SITE = http://downloads.sourceforge.net/project/libpng/libpng$(LIBPNG_SERIES)/$(LIBPNG_VERSION) From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:25 +0200 Subject: [Buildroot] [git commit] package/libzlib: bump to version 1.2.13 Message-ID: <20221024214302.89D6487049@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5a948e32fece110c6208c1b0fa1a05d55037a7e7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop all patches (already in version) - Replace README by LICENSE file added with https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/releases/tag/v1.2.13 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...sue-that-discarded-provided-CC-definition.patch | 28 ----------------- package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ---------------------- .../0003-fix-CVE-2022-37434-regression.patch | 32 -------------------- package/libzlib/libzlib.hash | 4 +-- package/libzlib/libzlib.mk | 7 ++--- 5 files changed, 4 insertions(+), 102 deletions(-) diff --git a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch b/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch deleted file mode 100644 index 398e1c9481..0000000000 --- a/package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 05796d3d8d5546cf1b4dfe2cd72ab746afae505d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 28 Mar 2022 18:34:10 -0700 -Subject: [PATCH] Fix configure issue that discarded provided CC definition. - -Downloaded from upstream commit: -https://github.com/madler/zlib/commit/05796d3d8d5546cf1b4dfe2cd72ab746afae505d - -Signed-off-by: Bernd Kuhls ---- - configure | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/configure b/configure -index 52ff4a04e..3fa3e8618 100755 ---- a/configure -+++ b/configure -@@ -174,7 +174,10 @@ if test -z "$CC"; then - else - cc=${CROSS_PREFIX}cc - fi -+else -+ cc=${CC} - fi -+ - cflags=${CFLAGS-"-O3"} - # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure - case "$cc" in diff --git a/package/libzlib/0002-fix-CVE-2022-37434.patch b/package/libzlib/0002-fix-CVE-2022-37434.patch deleted file mode 100644 index a61be48536..0000000000 --- a/package/libzlib/0002-fix-CVE-2022-37434.patch +++ /dev/null @@ -1,35 +0,0 @@ -From eff308af425b67093bab25f80f1ae950166bece1 Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Sat, 30 Jul 2022 15:51:11 -0700 -Subject: [PATCH] Fix a bug when getting a gzip header extra field with - inflate(). - -If the extra field was larger than the space the user provided with -inflateGetHeader(), and if multiple calls of inflate() delivered -the extra header data, then there could be a buffer overflow of the -provided space. This commit assures that provided space is not -exceeded. - -Backported from: eff308af425b67093bab25f80f1ae950166bece1 -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7be8c6366..7a7289749 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,9 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -+ len = state->head->extra_len - state->length; - if (state->head != Z_NULL && -- state->head->extra != Z_NULL) { -- len = state->head->extra_len - state->length; -+ state->head->extra != Z_NULL && -+ len < state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch b/package/libzlib/0003-fix-CVE-2022-37434-regression.patch deleted file mode 100644 index 46a58710d2..0000000000 --- a/package/libzlib/0003-fix-CVE-2022-37434-regression.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d Mon Sep 17 00:00:00 2001 -From: Mark Adler -Date: Mon, 8 Aug 2022 10:50:09 -0700 -Subject: [PATCH] Fix extra field processing bug that dereferences NULL - state->head. - -The recent commit to fix a gzip header extra field processing bug -introduced the new bug fixed here. - -Backported from: 1eb7682f845ac9e9bf9ae35bbfb3bad5dacbd91d -Signed-off-by: Marcus Hoffmann ---- - inflate.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/inflate.c b/inflate.c -index 7a7289749..2a3c4fe98 100644 ---- a/inflate.c -+++ b/inflate.c -@@ -763,10 +763,10 @@ int flush; - copy = state->length; - if (copy > have) copy = have; - if (copy) { -- len = state->head->extra_len - state->length; - if (state->head != Z_NULL && - state->head->extra != Z_NULL && -- len < state->head->extra_max) { -+ (len = state->head->extra_len - state->length) < -+ state->head->extra_max) { - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); diff --git a/package/libzlib/libzlib.hash b/package/libzlib/libzlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/libzlib/libzlib.hash +++ b/package/libzlib/libzlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/libzlib/libzlib.mk b/package/libzlib/libzlib.mk index f75502326b..e344cc7ad9 100644 --- a/package/libzlib/libzlib.mk +++ b/package/libzlib/libzlib.mk @@ -4,19 +4,16 @@ # ################################################################################ -LIBZLIB_VERSION = 1.2.12 +LIBZLIB_VERSION = 1.2.13 LIBZLIB_SOURCE = zlib-$(LIBZLIB_VERSION).tar.xz LIBZLIB_SITE = http://www.zlib.net LIBZLIB_LICENSE = Zlib -LIBZLIB_LICENSE_FILES = README +LIBZLIB_LICENSE_FILES = LICENSE LIBZLIB_INSTALL_STAGING = YES LIBZLIB_PROVIDES = zlib LIBZLIB_CPE_ID_VENDOR = zlib LIBZLIB_CPE_ID_PRODUCT = zlib -# 0002-fix-CVE-2022-37434.patch -LIBZLIB_IGNORE_CVES = CVE-2022-37434 - # It is not possible to build only a shared version of zlib, so we build both # shared and static, unless we only want the static libs, and we eventually # selectively remove what we do not want From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:38 +0200 Subject: [Buildroot] [git commit] package/iperf3: bump to version 3.12 Message-ID: <20221024214302.D559B8704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=225c0a9c0a7e790e92ee41d094932ce851b7dfcc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE file (update in year with https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) https://github.com/esnet/iperf/blob/3.12/RELNOTES.md Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/iperf3/iperf3.hash | 6 +++--- package/iperf3/iperf3.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/iperf3/iperf3.hash b/package/iperf3/iperf3.hash index c96d68cd99..15c75b6dac 100644 --- a/package/iperf3/iperf3.hash +++ b/package/iperf3/iperf3.hash @@ -1,4 +1,4 @@ -# From https://downloads.es.net/pub/iperf/iperf-3.10.1.tar.gz.sha256 -sha256 03bc9760cc54a245191d46bfc8edaf8a4750f0e87abca6764486972044d6715a iperf-3.10.1.tar.gz +# From https://downloads.es.net/pub/iperf/iperf-3.12.tar.gz.sha256 +sha256 72034ecfb6a7d6d67e384e19fb6efff3236ca4f7ed4c518d7db649c447e1ffd6 iperf-3.12.tar.gz # Locally computed -sha256 0e1cb1921904626f0d3e86cacc0e28333140f0f9957267cff0b9d185645743ed LICENSE +sha256 a5c2e3d799f2835156e565a3de4fad33d32ed289cdc9e414dfaf75719fd12ef9 LICENSE diff --git a/package/iperf3/iperf3.mk b/package/iperf3/iperf3.mk index 8c57c61fce..9041c86575 100644 --- a/package/iperf3/iperf3.mk +++ b/package/iperf3/iperf3.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF3_VERSION = 3.10.1 +IPERF3_VERSION = 3.12 IPERF3_SITE = https://downloads.es.net/pub/iperf IPERF3_SOURCE = iperf-$(IPERF3_VERSION).tar.gz IPERF3_LICENSE = BSD-3-Clause, BSD-2-Clause, MIT From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:30 +0200 Subject: [Buildroot] [git commit] package/libshout: bump to version 2.4.6 Message-ID: <20221024214302.A6C968704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=54a8261e6f0f80fe8eaa3ad48e0f3936015466e1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) and so autoreconf - libvorbis is optional since https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...nfigure.ac-add-an-option-to-disable-tools.patch | 51 ---------------------- package/libshout/Config.in | 1 - package/libshout/libshout.hash | 4 +- package/libshout/libshout.mk | 13 ++++-- 4 files changed, 11 insertions(+), 58 deletions(-) diff --git a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch b/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch deleted file mode 100644 index 5c20db72e9..0000000000 --- a/package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 148b56bf894192cef6dd133715e295260b934a71 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 5 Mar 2021 15:50:32 +0100 -Subject: [PATCH] configure.ac: add an option to disable tools - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.xiph.org/xiph/icecast-libshout/-/issues/2331] ---- - Makefile.am | 5 ++++- - configure.ac | 5 +++++ - 2 files changed, 9 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index ea855cf..79241f1 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -3,10 +3,13 @@ - AUTOMAKE_OPTIONS = 1.6 foreign - ACLOCAL_AMFLAGS = -I m4 - --SUBDIRS = include src doc win32 tools -+SUBDIRS = include src doc win32 - if HAVE_EXAMPLES - SUBDIRS += examples - endif -+if HAVE_TOOLS -+SUBDIRS += tools -+endif - - EXTRA_DIST = INSTALL m4/shout.m4 m4/acx_pthread.m4 \ - m4/ogg.m4 m4/vorbis.m4 m4/xiph_compiler.m4 m4/xiph_net.m4 \ -diff --git a/configure.ac b/configure.ac -index 264b9b0..34f971c 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -100,6 +100,11 @@ AC_ARG_ENABLE([examples], - AS_HELP_STRING([--disable-examples],[Do not build example code])) - AM_CONDITIONAL([HAVE_EXAMPLES],[test "${enable_examples}" != "no"]) - -+dnl Allow tools not to be build -+AC_ARG_ENABLE([tools], -+ AS_HELP_STRING([--disable-tools],[Do not build tools])) -+AM_CONDITIONAL([HAVE_TOOLS],[test "${enable_tools}" != "no"]) -+ - dnl Module checks - XIPH_NET - --- -2.30.0 - diff --git a/package/libshout/Config.in b/package/libshout/Config.in index f8749b9183..6a7560b349 100644 --- a/package/libshout/Config.in +++ b/package/libshout/Config.in @@ -1,7 +1,6 @@ config BR2_PACKAGE_LIBSHOUT bool "libshout" select BR2_PACKAGE_LIBOGG - select BR2_PACKAGE_LIBVORBIS help Libshout is a library for communicating with and sending data to an icecast server. It handles the socket connection, the diff --git a/package/libshout/libshout.hash b/package/libshout/libshout.hash index ae43e0a9c8..d562b5231b 100644 --- a/package/libshout/libshout.hash +++ b/package/libshout/libshout.hash @@ -1,8 +1,8 @@ # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA512SUMS -sha512 290844185da16961f03434d3e341573dd6cb0139e5fa81902903021b641382d2629302d7c356bc591b35656754e07f4e44a8d9e782e092b17a051b9ae8f54341 libshout-2.4.5.tar.gz +sha512 e8478cdbf9a27674c16a7b620d1576f2e31a47262b8e29b314d0f46d4e5be24b9a29790b7b226f48939bc34cacf5734fae0aa5686c7ed5879cdbd827ff8e0339 libshout-2.4.6.tar.gz # From https://ftp.osuosl.org/pub/xiph/releases/libshout/SHA256SUMS -sha256 d9e568668a673994ebe3f1eb5f2bee06e3236a5db92b8d0c487e1c0f886a6890 libshout-2.4.5.tar.gz +sha256 39cbd4f0efdfddc9755d88217e47f8f2d7108fa767f9d58a2ba26a16d8f7c910 libshout-2.4.6.tar.gz # Hash for license file sha256 7a4436f9ec37603356791c87de3bc444989befd2682d29efb3d97604e04c1852 COPYING diff --git a/package/libshout/libshout.mk b/package/libshout/libshout.mk index 4afb762de6..be63786795 100644 --- a/package/libshout/libshout.mk +++ b/package/libshout/libshout.mk @@ -4,14 +4,12 @@ # ################################################################################ -LIBSHOUT_VERSION = 2.4.5 +LIBSHOUT_VERSION = 2.4.6 LIBSHOUT_SITE = https://downloads.xiph.org/releases/libshout LIBSHOUT_LICENSE = LGPL-2.0+ LIBSHOUT_LICENSE_FILES = COPYING LIBSHOUT_INSTALL_STAGING = YES -LIBSHOUT_DEPENDENCIES = host-pkgconf libogg libvorbis -# We're patching configure.ac -LIBSHOUT_AUTORECONF = YES +LIBSHOUT_DEPENDENCIES = host-pkgconf libogg LIBSHOUT_CONF_OPTS = \ --disable-examples \ --disable-tools @@ -23,6 +21,13 @@ else LIBSHOUT_CONF_OPTS += --disable-theora endif +ifeq ($(BR2_PACKAGE_LIBVORBIS),y) +LIBSHOUT_CONF_OPTS += --enable-vorbis +LIBSHOUT_DEPENDENCIES += libvorbis +else +LIBSHOUT_CONF_OPTS += --disable-vorbis +endif + ifeq ($(BR2_PACKAGE_SPEEX),y) LIBSHOUT_CONF_OPTS += --enable-speex LIBSHOUT_DEPENDENCIES += speex From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:36 +0200 Subject: [Buildroot] [git commit] package/iperf: bump to version 2.1.8 Message-ID: <20221024214302.CC6FF8704B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ede944f53509f825aa983de19d34fc30259b812c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 2.1.8 (as of August 5th, 2022) ------------------------------ - Add support for --bounceback to perform a repsonsiveness test (see man page for other options) - add support for working loads with --bounceback - Fix to wait_tick with Mac OS X - Various python pyflows commits - add support for client side tcp-write-time histograms and mean/min/max - add support for human readable dscp or -T values (see man page) - udp_accept no longer accepts packets from a previous run as a new connection, this can occur with long network delays - multiple isoch bug fixes for both UDP and TCP - isoch server provides mean/min/max/stdev for both frames and packets - UDP max MTU discovery, requires configure.ac will support --enable-discover-defaultlen prior to compile - Drop first patch (already in version) - Drop second patch (not needed since https://sourceforge.net/p/iperf2/code/ci/de5cb9954617309eecb8ae7d24b14e6b1e0c11eb) https://sourceforge.net/projects/iperf2/files/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/iperf/0001-Fix-build-with-musl-libc.patch | 67 ---------------------- .../iperf/0002-compat-gettcpinfo.c-fix-build.patch | 34 ----------- package/iperf/iperf.hash | 4 +- package/iperf/iperf.mk | 2 +- 4 files changed, 3 insertions(+), 104 deletions(-) diff --git a/package/iperf/0001-Fix-build-with-musl-libc.patch b/package/iperf/0001-Fix-build-with-musl-libc.patch deleted file mode 100644 index 269079ee1e..0000000000 --- a/package/iperf/0001-Fix-build-with-musl-libc.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 6766ab322a9eb8c73f8276be9cdea356eb124de0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 11 Nov 2021 07:58:10 +0200 -Subject: [PATCH] Fix build with musl libc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -musl libc defines its own struct ethhdr that conflicts with the kernel -define one. The kernel headers provide a way to suppress its struct -ethhdr. For that to work the libc headers must precede the kernel. Move -the kernel linux/if_tun.h include below libc net/ethernet.h. That fixes -the following build failure: - -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/net/ethernet.h:10, - from ../include/headers.h:117, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/netinet/if_ether.h:116:8: error: redefinition of ???struct ethhdr??? - 116 | struct ethhdr { - | ^~~~~~ -In file included from .../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_tun.h:20, - from ../include/headers.h:110, - from Thread.c:72: -.../arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/if_ether.h:148:8: note: originally defined here - 148 | struct ethhdr { - | ^~~~~~ - -Fixes bug #157. - -Signed-off-by: Baruch Siach ---- -Upstream status: sent to Robert McMahon - - include/headers.h | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/include/headers.h b/include/headers.h -index 00e0ea0dba42..887490475381 100644 ---- a/include/headers.h -+++ b/include/headers.h -@@ -106,11 +106,6 @@ typedef bool _Bool; - #include - #endif - --#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) --#include --#include --#endif -- - - // AF_PACKET HEADERS - #if defined(HAVE_LINUX_FILTER_H) && defined(HAVE_AF_PACKET) -@@ -146,6 +141,11 @@ typedef bool _Bool; - #define IPV6HDRLEN 40 - #endif // HAVE_AF_PACKET - -+#if ((HAVE_TUNTAP_TAP) || (HAVE_TUNTAP_TUN)) -+#include -+#include -+#endif -+ - #ifdef WIN32 - - /* Windows config file */ --- -2.33.0 - diff --git a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch b/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch deleted file mode 100644 index 786c7d1873..0000000000 --- a/package/iperf/0002-compat-gettcpinfo.c-fix-build.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a3339604bafa99f66e12687efc2c50d2e2df1276 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 12 Dec 2021 20:03:04 +0100 -Subject: [PATCH] compat/gettcpinfo.c: fix build - -Fix the following build failure raised since commit -c8f861a0a07b0606a581f2658c71959ad9417923: - -gettcpinfo.c: In function 'gettcpinfo': -gettcpinfo.c:101:42: error: expected declaration or statement at end of input - 101 | inline void gettcpinfo (int sock, struct ReportStruct *sample) { - | ^~~~~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/073e070478f0cda34784af96bb3a802c3aac8f72 - -Signed-off-by: Fabrice Fontaine ---- - compat/gettcpinfo.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/compat/gettcpinfo.c b/compat/gettcpinfo.c -index 4e11e2a..1d3791a 100644 ---- a/compat/gettcpinfo.c -+++ b/compat/gettcpinfo.c -@@ -99,4 +99,5 @@ inline void gettcpinfo (SOCKET sock, struct ReportStruct *sample) { - }; - #else - inline void gettcpinfo (int sock, struct ReportStruct *sample) { -+}; - #endif --- -2.33.0 - diff --git a/package/iperf/iperf.hash b/package/iperf/iperf.hash index 2e1f433dc7..34218bcf3b 100644 --- a/package/iperf/iperf.hash +++ b/package/iperf/iperf.hash @@ -1,6 +1,6 @@ # From https://sourceforge.net/projects/iperf2/files/ -sha1 41bd049625cbecda2bf5b6a6cc12a6c5baec549b iperf-2.1.6.tar.gz +sha1 7725efffc6ef46fe5247ee326c39e5fa2eadf1eb iperf-2.1.8.tar.gz # Locally computed: -sha256 4a43e44439b95622aebeee55754a17d1c94076032e90620dfc1ab9908cb9e080 iperf-2.1.6.tar.gz +sha256 8e2cf2fbc9d0d4d1cf9d109b1e328459f9622993dc9a4c5a7dc8a2088fb7beaf iperf-2.1.8.tar.gz sha256 5f9f5c4feca3347c3b3c0ada8b16b4e6b698aac4e6f016a24adf61a5915336d1 COPYING diff --git a/package/iperf/iperf.mk b/package/iperf/iperf.mk index f999ff4ac2..47944880a3 100644 --- a/package/iperf/iperf.mk +++ b/package/iperf/iperf.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPERF_VERSION = 2.1.6 +IPERF_VERSION = 2.1.8 IPERF_SITE = http://downloads.sourceforge.net/project/iperf2 IPERF_LICENSE = MIT-like IPERF_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:23 +0200 Subject: [Buildroot] [git commit] package/lirc-tools: bump to version 0.10.2 Message-ID: <20221024214302.807C887048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=58cc3977e83487bdaa1df232cf7adf6383d49cd7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop first to third patches (already in version) - Add a patch to disable documentation and avoid a build failure without doxygen https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../lirc-tools/0001-Fix-build-without-Python.patch | 63 ---------------------- ...ins-devinput.c-fix-build-with-musl-1.2.0.patch} | 0 .../0002-Fix-python-client-cross-compile.patch | 47 ---------------- .../0002-configure-add-disable-doc-option.patch | 52 ++++++++++++++++++ ...Fix-lirc-version-detection-when-cross-com.patch | 51 ------------------ package/lirc-tools/lirc-tools.hash | 8 +-- package/lirc-tools/lirc-tools.mk | 2 +- 7 files changed, 57 insertions(+), 166 deletions(-) diff --git a/package/lirc-tools/0001-Fix-build-without-Python.patch b/package/lirc-tools/0001-Fix-build-without-Python.patch deleted file mode 100644 index b1940eac0d..0000000000 --- a/package/lirc-tools/0001-Fix-build-without-Python.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 71f329d997d949d3c12d62d2f1473a1c99ee49b0 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Sun, 27 Aug 2017 21:30:37 +0300 -Subject: [PATCH] Fix build without Python - -Don't define HAVE_PYTHON35 when PYTHON_LIBS is empty. - -Also, don't build Python dependent code when HAVE_PYTHON35 is not -defined. - -This fixes build failures like: - -Makefile:1616: recipe for target 'python-pkg/dist/lirc-0.10.0.tar.gz' failed -make[3]: *** [python-pkg/dist/lirc-0.10.0.tar.gz] Error 1 -python-pkg/lirc/_client.c:1:20: fatal error: Python.h: No such file or directory - #include - ^ - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 74a2bcab6b - - Makefile.am | 2 ++ - configure.ac | 3 ++- - 2 files changed, 4 insertions(+), 1 deletion(-) - -diff --git a/Makefile.am b/Makefile.am -index 9f3dd14340cc..d8164fcd44cf 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -104,6 +104,7 @@ dist_py_pkg_doc_DATA = python-pkg/doc/Doxyfile \ - - libpython = $(libdir)/python$(PYTHON_VERSION) - pydir = $(libpython)/site-packages/lirc -+if HAVE_PYTHON35 - py_LTLIBRARIES = python-pkg/lib/_client.la - python_pkg_lib__client_la_SOURCES = \ - python-pkg/lirc/_client.c -@@ -116,6 +117,7 @@ python_pkg_lib__client_la_LDFLAGS = \ - $(PYTHON_LIBS) - python_pkg_lib__client_la_LIBADD = \ - lib/liblirc_client.la -+endif - - pylint: .phony - $(MAKE) -C tools pylint -diff --git a/configure.ac b/configure.ac -index 4108688433f8..07d901deafdf 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -50,7 +50,8 @@ test -z "$PYTHON_LIBS" && \ - test -n "$PYTHON_LIBS" || \ - AC_MSG_WARN([No python package found (missing devel package?)]) - python_version_nodots=$(echo $PYTHON_VERSION | tr -d '.') --AM_CONDITIONAL(HAVE_PYTHON35, [test $python_version_nodots -ge 35]) -+AM_CONDITIONAL(HAVE_PYTHON35, [test -n "$PYTHON_LIBS" && \ -+ test $python_version_nodots -ge 35]) - CFLAGS="$CFLAGS $PYTHON_CFLAGS" - - --- -2.14.1 - diff --git a/package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch b/package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch similarity index 100% rename from package/lirc-tools/0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch rename to package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch diff --git a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch b/package/lirc-tools/0002-Fix-python-client-cross-compile.patch deleted file mode 100644 index 02deefaf98..0000000000 --- a/package/lirc-tools/0002-Fix-python-client-cross-compile.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 13c4ffcfde07f659a836fba4a604dc1c5024bb90 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Tue, 29 Aug 2017 11:37:36 +0300 -Subject: [PATCH] Fix python client cross compile - -The setup.py setuptools wrapper needs to use a version of python built -specifically for cross compiling to cross compile successfully. Allow -setting that in the environment using the SETUPTOOLS_ENV variable. - -Fixes the following build failure: - -/usr/bin/ld: skipping incompatible .../lirc-tools-0.10.0/lib/.libs/liblirc_client.so when searching for -llirc_client -/usr/bin/ld: cannot find -llirc_client -collect2: error: ld returned 1 exit status -error: command '/usr/bin/gcc' failed with exit status 1 -Makefile:1578: recipe for target 'all-local' failed - -Signed-off-by: Baruch Siach ---- -Upstream status: https://sourceforge.net/p/lirc/tickets/308/ - - Makefile.am | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index d8164fcd44cf..a16be4278ae2 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -131,6 +131,7 @@ pep8: $(py_PYTHON) - if HAVE_PYTHON35 - all-local: - cd python-pkg; \ -+ $(SETUPTOOLS_ENV) \ - CFLAGS="-I$(abs_top_srcdir)/lib -I$(abs_builddir)/lib" \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py \ - $(if $(VERBOSE),,-q) build -@@ -179,6 +180,7 @@ $(abs_builddir)/python-pkg/setup.py: - $(PYTHON_TARBALL): $(abs_builddir)/python-pkg/setup.py - cp $(top_builddir)/VERSION $(abs_builddir)/python-pkg - cd $(abs_builddir)/python-pkg; CFLAGS=-I$(abs_top_srcdir)/lib \ -+ $(SETUPTOOLS_ENV) \ - LDFLAGS=-L$(abs_builddir)/lib/.libs $(PYTHON) setup.py -q sdist - - $(top_builddir)/python-pkg/VERSION: VERSION --- -2.14.1 - diff --git a/package/lirc-tools/0002-configure-add-disable-doc-option.patch b/package/lirc-tools/0002-configure-add-disable-doc-option.patch new file mode 100644 index 0000000000..fab485ffef --- /dev/null +++ b/package/lirc-tools/0002-configure-add-disable-doc-option.patch @@ -0,0 +1,52 @@ +From e9d5cbc01e3c0d6a31e2dba2f224b7f3dd21db37 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Sun, 23 Oct 2022 16:10:50 +0200 +Subject: [PATCH] configure: add --disable-doc option + +Allow the user to disable documentation through --disable-doc + +Signed-off-by: Fabrice Fontaine +--- + Makefile.am | 6 +++++- + configure.ac | 8 ++++++++ + 2 files changed, 13 insertions(+), 1 deletion(-) + +diff --git a/Makefile.am b/Makefile.am +index 6718af13..58a321d8 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -45,7 +45,11 @@ if WITH_SYSTEMDSYSTEMUNITDIR + SYSTEMD_DIR = systemd + endif + +-SUBDIRS = lib daemons tools plugins configs doc $(SYSTEMD_DIR) ++if HAVE_DOC ++ DOC_DIR = doc ++endif ++ ++SUBDIRS = lib daemons tools plugins configs $(DOC_DIR) $(SYSTEMD_DIR) + + if INSTALL_ETC + +diff --git a/configure.ac b/configure.ac +index d28c6732..f3384c95 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -486,6 +486,14 @@ AC_ARG_VAR(SETUPTOOLS_ENV, + ) + + ++AC_ARG_ENABLE(doc, ++ [ --enable-doc Build and install documentation (default=yes)], ++ [ enable_doc="${enableval}" ], ++ [ enable_doc=yes] ++) ++AM_CONDITIONAL([HAVE_DOC], [test x$enable_doc = xyes]) ++ ++ + suffix=$(echo "$VERSION" | sed 's/.*-//') + AM_CONDITIONAL(DEVEL, [test x$suffix = xdevel]) + +-- +2.35.1 + diff --git a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch b/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch deleted file mode 100644 index 04fbfe6ea2..0000000000 --- a/package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 732fd31610a6790a927ea9ed6d660796a1641254 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Thu, 7 Sep 2017 08:12:01 +0200 -Subject: [PATCH] build: Fix lirc version detection when cross compiling. - -The setup.py script that runs on the host can't use the client library -built for target. So setup.py falls back to a wrong hard-coded VERSION -value. - -Instead of importing the target library, use exec() to read -lirc/config.py directly for its VERSION value. - -Fixes build failure: - -/usr/bin/install -c -m 644 ./python-pkg/dist/lirc-0.10.0.tar.gz \ - '.../output/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/lirc' -/usr/bin/install: cannot stat './python-pkg/dist/lirc-0.10.0.tar.gz': \ - No such file or directory - -Signed-off-by: Baruch Siach ---- -Upstream status: commit 732fd31610a6 - - python-pkg/setup.py | 9 +++------ - 1 file changed, 3 insertions(+), 6 deletions(-) - -diff --git a/python-pkg/setup.py b/python-pkg/setup.py -index e9b33690f828..a2d92e0432aa 100644 ---- a/python-pkg/setup.py -+++ b/python-pkg/setup.py -@@ -6,14 +6,11 @@ import subprocess - import os.path - import os - --try: -- import lirc.config -- VERSION = lirc.config.VERSION.replace('-devel','') --except ImportError: -- VERSION='0.0.0' -- - from setuptools import setup, Extension - -+exec(open("lirc/config.py").read()) -+VERSION = VERSION.replace('-devel','') -+ - if 'CFLAGS' in os.environ: - cflags = os.environ['CFLAGS'].split() - if 'LDFLAGS' in os.environ: --- -2.14.1 - diff --git a/package/lirc-tools/lirc-tools.hash b/package/lirc-tools/lirc-tools.hash index 187768db47..4808508cca 100644 --- a/package/lirc-tools/lirc-tools.hash +++ b/package/lirc-tools/lirc-tools.hash @@ -1,6 +1,6 @@ -# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.1/ -sha1 9d6f6d18ac566a96ef4ca1d6909a4e8bc517d48a lirc-0.10.1.tar.bz2 -md5 86c3f8e4efaba10571addb8313d1e040 lirc-0.10.1.tar.bz2 +# hash from https://sourceforge.net/projects/lirc/files/LIRC/0.10.2/ +sha1 02092890205891b6de5a699294485a1eedba46c5 lirc-0.10.2.tar.bz2 +md5 cb96cfb0af8067c0062e2f5a100f426a lirc-0.10.2.tar.bz2 # Locally computed -sha256 8b753c60df2a7f5dcda2db72c38e448ca300c3b4f6000c1501fcb0bd5df414f2 lirc-0.10.1.tar.bz2 +sha256 3d44ec8274881cf262f160805641f0827ffcc20ade0d85e7e6f3b90e0d3d222a lirc-0.10.2.tar.bz2 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/lirc-tools/lirc-tools.mk b/package/lirc-tools/lirc-tools.mk index 05f20f5726..5263330741 100644 --- a/package/lirc-tools/lirc-tools.mk +++ b/package/lirc-tools/lirc-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIRC_TOOLS_VERSION = 0.10.1 +LIRC_TOOLS_VERSION = 0.10.2 LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION) LIRC_TOOLS_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:35 +0200 Subject: [Buildroot] [git commit] package/lensfun: bump to version 0.3.3 Message-ID: <20221024214302.C31728704A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cf8e0288c003b39ebc852cb3876c3b78608296ff branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to new upstream site to get latest release https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lensfun/Config.in | 2 +- package/lensfun/lensfun.hash | 5 +---- package/lensfun/lensfun.mk | 4 ++-- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/package/lensfun/Config.in b/package/lensfun/Config.in index 7ec49020ee..7c424f5351 100644 --- a/package/lensfun/Config.in +++ b/package/lensfun/Config.in @@ -11,7 +11,7 @@ config BR2_PACKAGE_LENSFUN actually use Lensfun to process your images you need an image editing application with Lensfun support. - http://lensfun.sourceforge.net + https://lensfun.github.io if BR2_PACKAGE_LENSFUN diff --git a/package/lensfun/lensfun.hash b/package/lensfun/lensfun.hash index cb56f32b56..f03d0b54ae 100644 --- a/package/lensfun/lensfun.hash +++ b/package/lensfun/lensfun.hash @@ -1,7 +1,4 @@ -# From https://sourceforge.net/projects/lensfun/files/0.3.2 -sha1 1d978b15aa7304d66a4931fa37ca9f8f89396c16 lensfun-0.3.2.tar.gz -md5 247e59a0812ec451f6cd0d20b3379cb5 lensfun-0.3.2.tar.gz # Locally calculated -sha256 ae8bcad46614ca47f5bda65b00af4a257a9564a61725df9c74cb260da544d331 lensfun-0.3.2.tar.gz +sha256 57ba5a0377f24948972339e18be946af12eda22b7c707eb0ddd26586370f6765 lensfun-0.3.3.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 docs/gpl-3.0.txt sha256 a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c docs/lgpl-3.0.txt diff --git a/package/lensfun/lensfun.mk b/package/lensfun/lensfun.mk index 9258409f57..f82ed44495 100644 --- a/package/lensfun/lensfun.mk +++ b/package/lensfun/lensfun.mk @@ -4,8 +4,8 @@ # ################################################################################ -LENSFUN_VERSION = 0.3.2 -LENSFUN_SITE = https://sourceforge.net/projects/lensfun/files/$(LENSFUN_VERSION) +LENSFUN_VERSION = 0.3.3 +LENSFUN_SITE = $(call github,lensfun,lensfun,v$(LENSFUN_VERSION)) LENSFUN_LICENSE = LGPL-3.0+ (libraries), GPL-3.0+ (programs) LENSFUN_LICENSE_FILES = docs/gpl-3.0.txt docs/lgpl-3.0.txt LENSFUN_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:39 +0200 Subject: [Buildroot] [git commit] package/file: bump to version 5.43 Message-ID: <20221024214302.DE93F87048@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f17b56f1aa43361eff4a81538a61e34c509ebb70 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of src/vasprintf.c (typo fixed with https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) https://github.com/file/file/blob/FILE5_43/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/file/file.hash | 6 +++--- package/file/file.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/file/file.hash b/package/file/file.hash index 33875776eb..49fa9e1e1b 100644 --- a/package/file/file.hash +++ b/package/file/file.hash @@ -1,7 +1,7 @@ # Locally calculated after verifying signature -# ftp://ftp.astron.com/pub/file/file-5.41.tar.gz.asc +# ftp://ftp.astron.com/pub/file/file-5.43.tar.gz.asc # using key BE04995BA8F90ED0C0C176C471112AB16CB33B3A -sha256 13e532c7b364f7d57e23dfeea3147103150cb90593a57af86c10e4f6e411603f file-5.41.tar.gz +sha256 8c8015e91ae0e8d0321d94c78239892ef9dbc70c4ade0008c0e95894abfb1991 file-5.43.tar.gz sha256 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274 COPYING sha256 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462 src/mygetopt.h -sha256 c4fa92d6504b88484a12140fe3e24b9b29b0112717f94b1ff4205d54828b1c70 src/vasprintf.c +sha256 cc3d8704489d08eaefcaee8c639cc6436c6f0f6b2b03986d3ba7521a1a1d2fc9 src/vasprintf.c diff --git a/package/file/file.mk b/package/file/file.mk index c06975460f..9b751e2696 100644 --- a/package/file/file.mk +++ b/package/file/file.mk @@ -4,7 +4,7 @@ # ################################################################################ -FILE_VERSION = 5.41 +FILE_VERSION = 5.43 FILE_SITE = ftp://ftp.astron.com/pub/file FILE_LICENSE = BSD-2-Clause, BSD-4-Clause (one file), BSD-3-Clause (one file) FILE_LICENSE_FILES = COPYING src/mygetopt.h src/vasprintf.c From thomas.petazzoni at bootlin.com Mon Oct 24 21:27:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 24 Oct 2022 23:27:33 +0200 Subject: [Buildroot] [git commit] package/libminiupnpc: bump to version 2.2.4 Message-ID: <20221024214302.BA34487049@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aa371ee5341b8a3e445d83557a413c821fd0309d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 2022/02/20: upnpc: use of @ to replace local lan address 2021/11/09: python module : Allow to specify the root description url - Drop patch (already in version) - Update hash of LICENSE file (license "refined" for github with https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...pc-CMakeLists-txt-fix-install-for-headers.patch | 43 ---------------------- package/libminiupnpc/libminiupnpc.hash | 4 +- package/libminiupnpc/libminiupnpc.mk | 2 +- 3 files changed, 3 insertions(+), 46 deletions(-) diff --git a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch b/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch deleted file mode 100644 index 2e4c8a69e6..0000000000 --- a/package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f82b0563a72e33800f5918ead68c41bcda1fd4c1 Mon Sep 17 00:00:00 2001 -From: heitbaum -Date: Fri, 1 Oct 2021 00:00:27 +1000 -Subject: [PATCH] miniupnpc/CMakeLists.txt: fix install for headers - -[Retrieved from: -https://github.com/miniupnp/miniupnp/commit/f82b0563a72e33800f5918ead68c41bcda1fd4c1] -Signed-off-by: Fabrice Fontaine ---- - miniupnpc/CMakeLists.txt | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 0553eeb3..6b0904c0 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -221,16 +221,16 @@ endif () - - if (NOT UPNPC_NO_INSTALL) - install (FILES -- miniupnpc.h -- miniwget.h -- upnpcommands.h -- igd_desc_parse.h -- upnpreplyparse.h -- upnperrors.h -- upnpdev.h -- miniupnpctypes.h -- portlistingparse.h -- miniupnpc_declspec.h -+ include/miniupnpc.h -+ include/miniwget.h -+ include/upnpcommands.h -+ include/igd_desc_parse.h -+ include/upnpreplyparse.h -+ include/upnperrors.h -+ include/upnpdev.h -+ include/miniupnpctypes.h -+ include/portlistingparse.h -+ include/miniupnpc_declspec.h - DESTINATION include/miniupnpc - ) - diff --git a/package/libminiupnpc/libminiupnpc.hash b/package/libminiupnpc/libminiupnpc.hash index 4714dd6f48..5dca8dd6cf 100644 --- a/package/libminiupnpc/libminiupnpc.hash +++ b/package/libminiupnpc/libminiupnpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 dce41b4a4f08521c53a0ab163ad2007d18b5e1aa173ea5803bd47a1be3159c24 miniupnpc-2.2.3.tar.gz -sha256 90bb92bf524970569296022fea562c85a4ec4d99a16f3aef2144d13d7087b631 LICENSE +sha256 481a5e4aede64e9ef29895b218836c3608d973e77a35b4f228ab1f3629412c4b miniupnpc-2.2.4.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/libminiupnpc/libminiupnpc.mk b/package/libminiupnpc/libminiupnpc.mk index f3661396ca..9dc5c719a9 100644 --- a/package/libminiupnpc/libminiupnpc.mk +++ b/package/libminiupnpc/libminiupnpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBMINIUPNPC_VERSION = 2.2.3 +LIBMINIUPNPC_VERSION = 2.2.4 LIBMINIUPNPC_SOURCE = miniupnpc-$(LIBMINIUPNPC_VERSION).tar.gz LIBMINIUPNPC_SITE = http://miniupnp.free.fr/files LIBMINIUPNPC_INSTALL_STAGING = YES From giulio.benetti at benettiengineering.com Mon Oct 24 21:53:36 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Mon, 24 Oct 2022 23:53:36 +0200 Subject: [Buildroot] [PATCH] package/rtl8723bu: fix build failure on PowerPc In-Reply-To: <20221024231213.41deaa35@windsurf> References: <20221023221425.395087-1-giulio.benetti@benettiengineering.com> <20221024231213.41deaa35@windsurf> Message-ID: On 24/10/22 23:12, Thomas Petazzoni wrote: > Hello Giulio, > > On Mon, 24 Oct 2022 00:14:25 +0200 > Giulio Benetti wrote: > >> Add local patch(pending upstream[0]) to fix build failure with PowerPc due >> to a package re-defition of get_ra() that is only defined in Linux PowerPc >> implementation. >> >> [0]: https://github.com/lwfinger/rtl8723bu/pull/192 >> >> Fixes: >> http://autobuild.buildroot.net/results/99571b055e6185d57f89b90821b76099ebc766ed/ >> >> Signed-off-by: Giulio Benetti >> --- >> ...uild-failure-on-PowerPc-architecture.patch | 46 +++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> create mode 100644 package/rtl8723bu/0001-Fix-build-failure-on-PowerPc-architecture.patch > > You forgot a reference to the upstream status of the patch in the patch > itself, so I've added that when committing. Thank you, every time I keep forgetting... -- Giulio Benetti CEO/CTO at Benetti Engineering sas > Thanks a lot for looking > into and fixing this build failure! > > Best regards, > > Thomas From thomas.petazzoni at bootlin.com Tue Oct 25 05:40:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 05:40:01 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-24 Message-ID: <20221025054008.81E3F401E8@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-24 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 12 | 0 | 1 | 13 | 2022.08.x | 17 | 22 | 0 | 39 | master | 132 | 265 | 8 | 405 | Classification of failures by reason for master ----------------------------------------------- host-bootgen-xilinx_v2022.2 | 21 libnss-3.84 | 13 crun-1.5 | 11 igd2-for-linux-2.1 | 11 systemd-250.4 | 11 glibc-2.36-44-g2628500f5dff... | 10 host-binutils-2.38 | 10 host-f2fs-tools-1.15.0 | 10 host-sentry-cli-1.59.0 | 9 sysvinit-2.99 | 9 brltty | 8 xz-5.2.7 | 7 host-go-1.19.1 | 6 libcodec2-1.0.5 | 6 btrfs-progs-5.16.2 | 5 host-rust-1.64.0 | 5 libarchive-3.6.1 | 5 unknown | 5 dash-0.5.11.5 | 4 host-pahole-73383b3a39afe86... | 4 linux-6.0.1 | 4 dahdi-linux-5c840cf43838e06... | 3 gensio-2.5.5 | 3 libgcrypt-1.10.1 | 3 libpciaccess-0.17 | 3 linuxptp-3.1.1 | 3 autofs-5.1.8 | 2 elfutils-0.186 | 2 gerbera-1.10.0 | 2 host-binutils-2.39 | 2 libcap-ng-0.8.3 | 2 libglvnd-1.4.0 | 2 libgpg-error-1.45 | 2 mtd-2.1.3 | 2 toolchain-external-codescap... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 ace-7.0.6 | 1 acpid-2.0.33 | 1 acpitool-0.5.1 | 1 apparmor-3.0.4 | 1 batman-adv-2021.4 | 1 binutils-arc-2020.09-release | 1 boost-1.80.0 | 1 cairo-1.16.0 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 coreutils-9.1 | 1 dmalloc-5.6.5 | 1 docker-cli-20.10.19 | 1 dropbear-2022.82 | 1 edk2-edk2-stable202102 | 1 efivar-38 | 1 ffmpeg-4.4.3 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubi/ubi.mk:51: /home/aut... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gobject-introspection-1.72.0 | 1 host-binutils-2.37 | 1 host-gcc-final-10.4.0 | 1 host-gcc-final-11.3.0 | 1 host-spirv-llvm-translator-... | 1 igh-ethercat-1.5.2 | 1 jack2-1.9.20 | 1 libabseil-cpp-20220623.1 | 1 libcamera-ba6435930f08e802c... | 1 libdcadec-0.2.0 | 1 libglib2-2.72.3 | 1 libqb-2.0.6 | 1 libzlib-1.2.12 | 1 lightning-2.1.3 | 1 linux-tools | 1 ltp-testsuite-20220930 | 1 lxc-4.0.12 | 1 mariadb-10.3.36 | 1 mesa3d-22.1.6 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 opencv3-3.4.17 | 1 openpgm-5-3-128 | 1 openssh-9.1p1 | 1 perl-5.34.1 | 1 php-8.1.11 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 procps-ng-3.3.17 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.2 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 s6-portable-utils-2.2.3.2 | 1 sdl-1.2.15 | 1 stress-ng-0.13.05 | 1 uccp420wlan-6.9.1 | 1 uclibc-1.0.42 | 1 uqmi-0a19b5b77140465c29e2af... | 1 wolfssl-5.5.1 | 1 zeek-4.1.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/4b1867d9912af2b5f5132352efa6e5d86ff62fda | m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/23eb733c9212149715c4f022045735b5ccbb3455 | x86_64 | ace-7.0.6 | NOK | http://autobuild.buildroot.net/results/9027735ccc3ecc9bd9b084d284dcf18f19fc5900 | mips64 | acpid-2.0.33 | NOK | http://autobuild.buildroot.net/results/6f2cd92b9a4bd0fdbc62c29a80fa13743e1fec46 | ORPH powerpc64le | acpitool-0.5.1 | NOK | http://autobuild.buildroot.net/results/1b74f37533b253c0d7e6e471825de8b44770134c | arceb | apparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/ca71539b6c5989d71975f09f45bd34118c23ac26 | microblaze | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/4aa59f961081cf65331baca7c132923000d3c7b1 | mips64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/51965b6ae0e956bd53bf8785ecc1529d59a9b332 | powerpc64le | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/174bddb2b4b5aba1d23b9fcd5dfbec57c2cee271 | arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/351723ea2ef57da67404dcbd54c754d4b85a1cf8 | arceb | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/35494960c1dfc3385b92c1d17630d6b4f115a0a5 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/7aa10ee3b1a70b74bfa3db88bc441a02634d0094 | m68k | brltty | TIM | http://autobuild.buildroot.net/results/d24dd9da1d82eaf2256ac3cd2e1eff02dc86f519 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d740119cf7483532c6183f2b64e57b28f21e08fe | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/7554066df42f4c20efaf64ee709fc47e6647b2c2 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/d90e449e44e6f1e57331db753bc8281a6655db47 | i686 | brltty | TIM | http://autobuild.buildroot.net/results/d9ea1e55697063e212d406af172759b336e095ed | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/685d2ce53d25c7771eafaf7293e8c7389241c12e | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/88ddc90d6134f64bc4f036bac68fa08576a353c9 | or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/b9d67bb2c639096fa005bc09f48fba4f9e74d7af | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/d0f0dea2138371c13e4e2b1ce39beef1a2f7375c | ORPH mips64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/1c5ab8a4e2f719aa843390020ad19df62567c4c3 | ORPH sh4eb | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/4ab0773e5235141aa9527cebb3d1d041f15d3fa6 | ORPH or1k | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0eafc50e756610186c06c8c4d4989f46fb2574b4 | ORPH or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/e783332cd955b4133c1550ed8a3db5fba021a89d | mipsel | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/55388bffd0eef1fd2661d22ef383a9947f6d2816 | sh4 | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/a07f2f34359b2c24a2e7ea0bbbdf2edfd429dbfc | ORPH microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2aac3c26f7141f8e4f8ca7456fb136ac13389d63 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/27b08e3904e0249bad7ce05a191fbea4e3fd62d4 | mips64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1af5bd7324755d49ca7e01f1923eda5a77e0d7da | sh4eb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c987304527650f7aaf32b76046634b0b5e3f8e75 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2db14c0c83873d29c418af1a2462faba57dfb220 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f9a9e613966ce90cc755cd34158c63ec641ee364 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/9888958eeb75352a80b27866a4da9bd1530a48f3 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/aed876e9c62ed12eeedcc6473fc02a06353528a6 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b34fb6d70c583885f243436a3965b855785acbb4 | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/d2a309a4e3b28c2f75b15b59b86b2238065a0fd7 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/fd1b41edb32536905611688de611ecad92b5855a | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/4f959766f8f202821a1ee5e33bb801b6b922f41d | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c0efc57acbf11b473086c492e4c7666ba2de2e17 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/a39db8c6c8a8f2d7fc46abf31c85dc1293fb6755 | i686 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/330e4ea817fcc4a3fc2cde8d9b753ad4eefe0e82 | ORPH xtensa | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b895476fa94f5e7f92aaef94093ea16c6a535cc6 | ORPH sh4eb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/7cc108963022f14c23b993414a8e5b19dbe34489 | ORPH sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/9f8e826227031d8a3a0771586db86d879aabb96c | ORPH powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/2cfd0a2103e7a302d0369e5cd83f8da18f1b1b9d | ORPH x86_64 | docker-cli-20.10.19 | NOK | http://autobuild.buildroot.net/results/54847564cf80771268189c13d9385692a7c2d45f | riscv64 | dropbear-2022.82 | NOK | http://autobuild.buildroot.net/results/ecb444fcb3f457319a4aee90b851638c4be17771 | x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/4ce6ebce82a5058790bccbf9e8e92ce2c36bda58 | i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/a8c5d9cb30b4df1f90d46d886cb1d095daa8517b | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/9d43aaaeec92b6cf12b62b415b882f22649bc69b | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/92e41240564e5f2dd8418a28bb6018356b8f0a9c | ORPH sparc64 | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/5708e820dbc95b212261e44a013725339da88913 | riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/b726d3ceea6180748d75bf467b4542f509862057 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/b342ced57101b8e39063f5d3dc193cbf1ccd6cd4 | powerpc64le | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/a3f562f237a74093bd59f00dcb48514b4f3ff5f9 | m68k | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/7c35af274ac5c35c9d453a607d79bea8abcbc680 | s390x | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/0e4890f585236099b1e69f349d06aca399554dec | powerpc64 | fs/ubi/ubi.mk:51: /home/aut... | NOK | http://autobuild.buildroot.net/results/b087c5fb20434f7b372a7176bf7591f8a543da1d | m68k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/c932385c9de760d2fcaed072bb244ae1d4ded09f | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/b1f603733b63e505e859311beb66be644dee6fb7 | microblaze | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/83721b2d66739ca0b62e71854960ea7aea68f5d2 | powerpc64le | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/8fa9a466f2fde9b659a97932100920f4156fc8e6 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5971a925a661974720e343bdf87f25bea600fa28 | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/363914df8a1962217cbb503255dd725787f73393 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/74f37d64d24a61ab2c1f2b75df783676cfde0f71 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/15a1c54b919ec7f23a1f734f6673b9376aae6ac5 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/e2eb295fe84b9a9758c0f2f7731205fd2cc40830 | sh4a | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f4d5671b256f0148454215e2679cfdc4efc14eb5 | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b47fb6908e6cc83464bd8696786b7d51b4c3d25d | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44a751037c840ae53f12f4550ca4955bdb47488a | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/889d956f0c8d2b392a2220834e5e2070a9e8c72e | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/229914e2c78f247dccd6e98dabd446cc85a5dded | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/019123e25a7e0de62e34dac5f47e602c3b28225d | arceb | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a3b4a5ea19e13c39c0726fc277d36c77d38e2de | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/9ad60bcd2351b5fd8d5df0de30300847b6f377f5 | ORPH mips64 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/2875216e8fb92d01e48acbf181bb9c1514ded713 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4d426459bf121befd75f7845927fea7aab04cfe6 | powerpc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/1608af0ee967ceef9a802d8e56765d755663ff9a | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c541f9a55c6defb02bb6d951702b851256405c0f | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/287374b57e301c751f5ff963f5880e723e3df20a | i486 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/bf5c7c933698d213a9dda0aab4026897e92a4dc1 | or1k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c28cbb9af212bde7df1157415c22f0dfe4eb2c2d | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/7ed05682a699380c405a923a934445de35165735 | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/829ba5bb9263ced2081ab467a0be2c09a1a0e36c | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3d1cac0c8b9e607b8314561e3c8d256fad334d1d | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2c976e60db81a29206cfabf7818c9a2eb7ecd071 | mipsel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/b82527fed7f18931060bd12253e4bbcabbfc2ab1 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/f31a87f1ec6f103eeadec6789ece3517f64121fb | powerpc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/0e4db35e2af74da72a9c3d326ee37c984eaff03b | mips | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/dd0b0c562cab2815f13da90fa71ab8e1707424cd | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/c30e851f3185b373febb6e5429432e86eba1ba8b | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/797139d4bb2c28c691cf6ed65fe222490fce49db | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/41b3d6cd51d2c015f0d5fc935385b9237f526e01 | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4866e57e2c06446faee71747c3773622b035e7d9 | sparc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/dcb4ae27f2977505dc1558e109d5b132e7d78f78 | x86_64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/0e8dd39145cd4e09282e4349221f9d9e82a4406f | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/7eaaf1d633e9f98370afc1d3635c29e76785be63 | m68k | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4c5aae92b3c5352d0faebcaf9163781778bb185f | mipsel | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/08cdbca41a03cf87d240f90286fa79541c1fd654 | xtensa | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3380fb29450e10839df77f357056789baa8c4974 | sparc64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/44398e17f0b7f81893130c62618895e882aa7e16 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/de4a80951d485066ed846daa07b1d1cdc7bf667f | arceb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/759f66dcc7041132c60491a15bee4f986c0fdb01 | riscv32 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/24686d256784bad7b85a14a1630e7ef020e1b914 | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/f0022becdaf028f3e90d6f4533c148da9d9c2086 | s390x | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/b19198b02cdabd3c1e74c955d3a01595bccb03c6 | powerpc64le | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3db2992c7ad005f6061dc71d5de0b2f6257d71ba | powerpc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/8ed08cd95101f945721ee346a0a4435efe66abc7 | aarch64_be | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/a568d8653b7e4b63f3398eeeaa56819c37a0cd6a | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4e5a0a4ab583dca5c37a0b7e331127e424ce2562 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/fa2fa8b5d3fa2931cc3367d46f5135ea02fd47b1 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dc8a8552440c60a27031f26c123760f0a7b7238f | powerpc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/93495599068e5116cc5557adbe6ddacac7975422 | i586 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a6d812846727c794aee9f262eb4d049db93f2ccf | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9cd8864d5f8dcb5637b4e47ada4f7d9520f226b4 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/cb440fee7d39d31696de0b87ef4c78d533c316a2 | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/065cdfacb0a9f8a11dc250a5b58e4180989d7957 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d0b4a79ca5ab34af9b0bf783f4c3757150f62bd | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/296ca4bc2e786301b75704484acfa5bd30a41656 | mipsel | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/35b220314754ae7ef9c9055c2518a5637c0035b8 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2fd87a1f760d32ad7a9de04253abd0659e43f7c5 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/f7f423ae1b7772b01da86a2491052324bdd76692 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/9034a76ee59141ac22924f7267a34946ead0171a | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/429eaa7be5171fecffd35d49f3e54a0842edda35 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/ebfd51c8cee8a02f31d6a9235e9335684abab211 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0e78500e9efedc490f6ee1c4ee8cea2f98ab3039 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/5837eb9d4d6a9a6b883552eaa0b4424dc04ee6d0 | aarch64_be | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d2984117affdc3d9eaf4d9a05a1be0e0f44167d1 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f00b33a8c236983b2f50593fb4f7c12564016930 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/d5c317f61f4000ad726b5f1ebbfa3454921deb64 | microblaze | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/32af62492de4b8751e7d0956ae1ba32b9360dee5 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/2a7f0adbce46629bde631ba74bb28adeee0c1351 | arm | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/a5979d1127879f6fd5c0e74fae4c85bfcdcf6fb2 | powerpc64le | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/eb434afd826e48f76f18f54b821b0a883a01ada7 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bf3990d76834551f42a8623458564cee4b9956c0 | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bd472ce0aa085f757fb3619b403fe195e13a87a7 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6b1c7dfecfebcf7192776380280a4c1e8a7b586c | sh4a | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/1f4d84e8aed2c653900d4468b41d767714174f55 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9e2987f98db50e3115d298ec48e191905f548645 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b13974e3697310e386d579af22809fc2ee61e09f | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68723c3da50c18105a1ea526516d1b2cb10e8a3d | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/87a0a9cdc52ecc74b80bab68721b5d0b06d2fe54 | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a6c6af7ed9b378d6726209a26e8d94aecc3186d7 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a5c0787c81e1a51a79cd60bb66bc5bf5a2b4b74a | microblazeel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a44249757668827d49980cdbd1b6a5b34744d59b | armeb | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/364449429e91c2cd93feaf5d8832554fd18b1d2b | ORPH riscv64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a6f381137e6e35459c352ed598821610f8531252 | s390x | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/141d14efc2b097ef40a1f913b694cce7fda63901 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e336116c073dfa6f2294b5c7096bcb661168395f | or1k | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/0473b16b78eeabbc0e5a1681a5dcfb432a5460b5 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ac053992977bc449e1529bcbdcc5bc5572e441b6 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c943b9609ef3bb1a310bbf8a22bd5b995fc94353 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/1aba121e41d432277a52815030bc6ab9666d56d4 | arm | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/caeb4b79db2ce29779308c526af20ac7c4fb6ada | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ca16a3daab3ece0374030e5a0386c51a8bb707c9 | powerpc64le | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/88b63734e5065524568b285c4f721ec2796457ca | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4cb42ced664bef29321c48d7f3a4a0e435b4f04e | aarch64_be | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/5614ed4132684dcbd35cf09385c267417a5f471b | m68k | jack2-1.9.20 | NOK | http://autobuild.buildroot.net/results/68ad7668716388ed5c48a67db6e0ef23ef83e116 | mips64el | libabseil-cpp-20220623.1 | NOK | http://autobuild.buildroot.net/results/f8c1af24d59fad49d018c2137524f38d38ff967b | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/75b6a996c49a38b71aa3695dc5bfeec12f1197ba | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/1b492799c9db98e6f47d04efb6127ea7112d8c49 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/3e439548155e83d1a345a4425334a140f23c04e8 | mips64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c806a48d476cf706ca1895a10bb796185e8ec750 | aarch64_be | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bbb3908599feb8dc907c9c2f7240d4222067c87b | sparc | libcamera-ba6435930f08e802c... | NOK | http://autobuild.buildroot.net/results/fad0e82946a236b2c5f14bb06f9eced93e0a0299 | or1k | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/a63d1fd00e62b067d31fe56a2ef32b0b48740234 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/f08a7f2e318804317476cf688b1c386e7b24cab6 | microblazeel | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3e8880bbff7d42985d4c4d86d49dd5e6b9020050 | m68k | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/95016bfec95d40f72eab2e92fba9853f665d13fb | arceb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/d6cad256f5a9b726ec18fa09b809f40906855ad2 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/02975a99e68e55472dbb10ff00be16ccbe5d1f29 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/0c11c5ade6117ec5b1f1d53fac1925b095ba4052 | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/d9a23dd8e01d141217d884617b8a0bab5cea3262 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/1c09c64ba1951a33dc92b49c86c955437cc0c41b | armeb | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/47cee2ea21bbf2117e30b2a7dacc4f2674e134a0 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/6658af360cffb28652ddb93362d368d02e36c662 | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/fe622168cbb73cddb73aec1bb5893018045b5850 | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/b9338c4b72012f67df0d412b75c051113e4c9358 | arm | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/2e6c5a7b1239e81c36fcdec94dbe4eabb3187202 | ORPH m68k | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/b422e3610c76b7ea1e2061fe9ac57dee55f6dc54 | ORPH aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/cfc9584ee06f18bf91ff3dd5406d711fa21fe702 | ORPH aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/897e975312929172443132b472110b9148dc4cae | ORPH aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2c3e7b0d08cbb3ec062cc4c852fc54759952c65a | powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5d84c74cc399c2c08481d2ebf982161cb459b254 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/338940364d5085eb8eed8d26fe63ba071717d198 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5e8e8f4e7c0f90ee7137183b1eb0b873ac09586c | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c2571b602a7b9b836faeef237dd182b88bb2915 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/434c58eed5eb80dd75b465c75d586d9b61297a76 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6517f518d887921f5eebeb2b087c56363cec5222 | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ad895b98f132bd7c8bc06866a6a3c3d60add920a | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/441a5d95cda42a7e3e9227eb70a27a2a3852d02e | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/75141ef352d42d22a4f09ab3190ad22a301cd7f5 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e9163f9d3776fc7fe9aa2324471773d1b2145a20 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c628ae62b900172c26839ff80be50d293a1ac0bd | m68k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/922101a2b5626810b197d656446a0b3257d1ab3c | s390x | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/30d7c3522ee6883568d8b68b81ad77a1d95b61d3 | arceb | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/d681b61f60f77d61aa54c2470dcf512499f79ab9 | xtensa | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/ea72df7f71d15ae7ead41f038a1c3cf0b53854a1 | powerpc | libqb-2.0.6 | NOK | http://autobuild.buildroot.net/results/b91de249553053f33b9bed77ee0cd340f720f41e | mips64 | libzlib-1.2.12 | NOK | http://autobuild.buildroot.net/results/96ab21bfe7a61fb1658d8d117501b2ce328b5b84 | ORPH x86_64 | lightning-2.1.3 | NOK | http://autobuild.buildroot.net/results/72a977275c00c184e1d5e6ac35f50faf0d159476 | mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/58ecbfb1374f0f14f83d153af4c29ab7d0dde8e8 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6bc5d11c10825ec1b6902a316ccb171b1b52c34d | ORPH riscv64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/059145c8b651b0f93db8235c88ac2cd19aae362c | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e517bcb0a90d6603f824a2e6c4a89440dcb00224 | ORPH nios2 | linux-tools | NOK | http://autobuild.buildroot.net/results/74ff4beaa1a6faf59b622846bffd69482d45b84c | ORPH armeb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/0b799b5d44c410b9ac6fd073edb89c77369dda55 | microblaze | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/32d0a02ac4f01046ab4bb72c7705728f0499e044 | powerpc64le | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f23b60ee02a942d1db02c58af90d6549334c2dcb | sparc64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/1b7af48c1e4c3753edd9c86b41f119054750e34d | nios2 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/d4ee8e839f9473787675bf190a60360e6ec03904 | sparc | mariadb-10.3.36 | NOK | http://autobuild.buildroot.net/results/6012c0045938d8c69eeeaeb6c5dc8c0bff6a7356 | ORPH xtensa | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/7c5259c365f958b6850345d7c5b8a4b20449e8bc | riscv32 | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/d74a430daa787685f19cdb8ee86a5c7414b78d86 | mips64el | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/4d4861310b4253bf6c770ac186a2f6f67838dd5c | powerpc64le | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/769a513983beb6fa4cf322e9ac62172329b83e80 | nios2 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/c20d359de137f9d2ca25d4a9303c0cd8413a3d22 | ORPH sparc64 | opencv3-3.4.17 | NOK | http://autobuild.buildroot.net/results/288372dba2046535fb17c2277170712600094ca7 | or1k | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/69527235ac234fbe4fc8586792148c57c8163989 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/73a6ba0b1f28fd8bdb0d3da83172dbe20764f00a | ORPH armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/ffdce0e57b7472488e8c76ee92d1b89fe10091f5 | sh4aeb | php-8.1.11 | NOK | http://autobuild.buildroot.net/results/56b537e9a56a0c6bae6da36e2ff2a6497bc2bc6a | arm | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/f26badb344ee9188b3c51fbaeb5e8adb9d339136 | ORPH microblaze | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/9b6bd17d67d29c334af98a37fcb48d52a07d2107 | ORPH sparc | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/8a2057f8bb607d1aaefc9ef063e960aecfd7a360 | mips64el | python-greenlet-1.1.2 | NOK | http://autobuild.buildroot.net/results/a3a12e54be72bcce060722dfe1f2c9eb593199ab | powerpc64 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/20ba5c8832b9263d9857e101b5e6bcaac6ba3135 | or1k | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/33a5d63634e1989572d137ad6e23b6192489345e | microblaze | s6-portable-utils-2.2.3.2 | NOK | http://autobuild.buildroot.net/results/81423069ba732cee18948612d75e0e7b2ca54621 | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/abfec3a7faec737272ec843fe853e1d22e3700ea | ORPH sparc64 | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/ba6e5d9c70d05168b681bb98c937f8882a8c9578 | sh4 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ad70d923fcb71cd15fc7edc2c51f7e19a9bc66a6 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/d912439be25859b22c63d2512d17aa480640c239 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ff5df966f0ea7d2c3d1eba1c397df7c51a2701fa | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/a26381a8da49ce1e3fe471e72c6f8fb8955e8b30 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e5f14a8a61f5e8e88e94c0d0e5d441b5430836f1 | mips64el | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6c8a68d29038bfad94191a73dcb8bcafc0a2cf9b | sh4aeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ddd4141e690aa165a9768b15d6571d1623cafd3d | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6a4221c9ce9b88b21c56eb81edf10737ffe33608 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/4b34698b596c2b5d65903088ae1e7f4ae019b465 | armeb | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/cef59241d8586cca2b88c95ffc42c67b6bf9bcbb | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/b809788e1f8feffdf0778a1576efd07b7d0b08f0 | arceb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/61fe8e63577f2201dedc59192786c6a8438ac084 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/6075e5b722aa3cf02c8ff3c2124ea09a333d4fb0 | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/62800b8386f20ee17301d96748d738c1fc93185e | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d2bcc2eabd52a8cf5e4b28a3ba8187ba8f23aae | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/18478399be1619fe857387ea4fcc853674d18cde | ORPH armeb | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/63da902d42e2851e5860047eaf542eaa66a2b17a | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a3bbb57630f5f6cda42fd30a4abc849785d94691 | ORPH aarch64_be | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0dbfde06dfd01efa33584cfdd7f056e17db651f1 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/0e1471a4509a55b2418b9fab994a3eee673b0ae0 | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/f7283b24335f6873ee4584bd134bd034cafcd9ae | ORPH mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/50f92affe157af7261a1e425d526be64ea22fa94 | ORPH sh4eb | uccp420wlan-6.9.1 | NOK | http://autobuild.buildroot.net/results/333aef73b5990b47e6c9c1b3e170e7c76302c5ae | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5271753fcc0269d22a0b11f89cf1b1da040f937f | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/2eda57d62a6cfcf4a1efc4410ebbbd93e4e99b07 | x86_64 | unknown | NOK | http://autobuild.buildroot.net/results/febd86b73ee319caf40bf98a52ed953e35d642e4 | armeb | unknown | NOK | http://autobuild.buildroot.net/results/e5f2753f002425de96f40821bc90e967bef020ff | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/10bbbcdf1b40898140ed6db567cf7e5b2baba4a5 | mips64 | unknown | NOK | http://autobuild.buildroot.net/results/139d393db5e4d5bf9db8e2a25a145e3e5c53c52e | arc | uqmi-0a19b5b77140465c29e2af... | NOK | http://autobuild.buildroot.net/results/57218d72118b6331e99735596831e1671dfe6227 | ORPH armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/3c0325fe9a2007cb53ad553ed0743d003bb550b6 | microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/090c70758f090bdf3206af31f8c1974b9cfd2f93 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/36661d7f3853dec651b6ac99642afce200b9361e | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d65f9f6706fe396367addbbc57ef0181456061b8 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f1a6be4a2936b67415817d37fa80d9b45680a23b | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/79bad7156a0f11d1f534d192616a85b8197b968e | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/ce848de38fdff7911788bf9232e409eb2ba64c86 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/46895fb6636372b23f968967041824323a185501 | ORPH mips64el | zeek-4.1.1 | NOK | http://autobuild.buildroot.net/results/908073808920d9c7f4f5b9dc56ebddf01d1c0f7b | arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/46a97e5ebc5218f8d7decaaa67b53acf3f18516e | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- libuwsc | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- nios2 | libuwsc | TIM | http://autobuild.buildroot.net/results/c6ed54be2e8b3298927a7f431fe246656d58441b | Classification of failures by reason for 2022.08.x -------------------------------------------------- linux-5.17.15 | 4 host-pahole-73383b3a39afe86... | 2 dc3dd-7.2.641 | 1 dmalloc-5.6.5 | 1 erlang-22.3.4.22 | 1 gerbera-1.10.0 | 1 host-go-1.18.6 | 1 host-rust-1.62.0 | 1 igd2-for-linux-2.1 | 1 libdeflate-1.12 | 1 libnss-3.81 | 1 linux-5.10.115-cip7 | 1 nodejs-16.17.1 | 1 openssh-legal-info | 1 package/openssh/openssh.mk:... | 1 perl-5.34.1 | 1 php-8.1.9 | 1 xfsprogs-5.14.2 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- or1k | dc3dd-7.2.641 | NOK | http://autobuild.buildroot.net/results/53a61cf4406570d23e10bc9b8fc43c2ce973a468 | ORPH i686 | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/4b32cc37bf8095d365836ae7eaf0279b37bfed34 | ORPH x86_64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/0f1d6aca5b0327815d3f1e08f0e4e8dd61efd08b | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/5ca8fc75181b1da347b601665443ad1505a05985 | mips64 | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/d0f0235848188c95198b45b53f644fb4bb7c6936 | arm | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/b18f05020bf9af82b142d00207a6243e9a8e94cb | microblazeel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f83062230c2fa148e82e1bf4980f5928e11aed1a | powerpc | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/c1fd0cf15cb4e793be737e27a8e3d7f0472e783e | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ff5c2e909d7d2d17bf569f3c95eab4f9adfe91eb | microblazeel | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/48175110072d8bde2a5ac70649ea453ef4f4ee2e | powerpc64le | libnss-3.81 | NOK | http://autobuild.buildroot.net/results/a4d4243be5e1a78e14d30ea1eb4d049e96c509b8 | powerpc64 | linux-5.10.115-cip7 | NOK | http://autobuild.buildroot.net/results/447d8fc83ef5d01ff306cf3fea9527b2212aeded | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/02928452171be3332a42f59d27f0e4fbe6e04734 | ORPH arm | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/73289305bdf9feb20310aa707c22b3ff8afe2fa5 | ORPH armeb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/c92d9e8714b89cfb4c898a802a9ae9422fff60d3 | ORPH nios2 | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/88a324848838af4e2c2c9f4b3775a9daf49dc728 | ORPH mipsel | nodejs-16.17.1 | NOK | http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4 | powerpc64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fbdfe4565fa34d62d9ceb30d330178370f78127c | ORPH aarch64 | package/openssh/openssh.mk:... | NOK | http://autobuild.buildroot.net/results/a9614a88f246deeb6680899e38b0257b5b878ee5 | mips | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/4aa7b516e7b211ed88ee277b55a5bff952e3371e | aarch64 | php-8.1.9 | NOK | http://autobuild.buildroot.net/results/4ba838bb2fc711e7aed06a319bb151066945b41a | nios2 | xfsprogs-5.14.2 | NOK | http://autobuild.buildroot.net/results/b0b2784325d5550a13ff4e099525411b17984643 | ORPH Gitlab CI results for 2022-10-24 ================================ Detail of runtime-test failures for master ------------------------------------------ runtime-test | link to the job | orph? --------------------------+---------------------------------------------------------------+------ TestAarch64Pages64kGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701180 | ORPH TestCpioDracutGlibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700904 | ORPH ...ioDracutGlibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700906 | ORPH TestCpioDracutMusl | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700909 | ORPH ...pioDracutMuslMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700911 | ORPH TestCpioDracutUclibc | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700914 | ORPH ...oDracutUclibcMergedUsr | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700916 | ORPH TestDockerCompose | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700986 | ORPH TestExecline | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700989 | ORPH ...lx60UclibcBleedingEdge | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701459 | ORPH ...Xtensalx60UclibcStable | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701460 | ORPH TestGdbHostGdbTarget9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700993 | ORPH TestGdbHostGdbserver9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700995 | ORPH TestGdbHostOnly9x | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215700997 | ORPH TestUbootOpensslPkgConfig | https://gitlab.com/buildroot.org/buildroot/-/jobs/3215701175 | ORPH -- http://autobuild.buildroot.net From d.lang at abatec.at Tue Oct 25 06:02:08 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:02:08 +0000 Subject: [Buildroot] [PATCH v2 00/11] group llvm projects and bump to version 15.0.3 Message-ID: This series attempts two things: - Move the different llvm subprojects into one folder and share version and site information. - Bump the version to the latest 15.0.3 Starting with version 12 different subprojects added dependencies or sources that would be available when building from the "monorepo". These have been added as new host packages. Changes v1 -> v2: - Rebased onto current master - Bump to 15.0.3 instead of 15.0.1 - llvm: use CMAKE_HOST_C_COMPILER instead of HOSTCC - libclc: Add missing change to package/Config.in Daniel Lang (11): package/llvm-project: new group for llvm packages package/llvm: move to llvm-project folder package/lld: move to llvm-project subfolder package/clang: move to llvm-project subfolder package/compiler-rt: move to llvm-project subfolder package/llvm-project/llvm-cmake: new package package/llvm-project/llvm-libunwind: new package package/llvm-project: bump to version 15.0.3 package/spirv-llvm-translator: bump to version 15.0.0-2 package/libclc: move to llvm-project subfolder and bump to 15.0.3 DEVELOPERS: add Daniel Lang for llvm-project DEVELOPERS | 21 ++++++++------- package/Config.in | 8 +++--- package/Config.in.host | 2 +- ...hains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch | 0 package/{ => llvm-project}/clang/Config.in | 0 package/{ => llvm-project}/clang/clang.hash | 2 +- package/{ => llvm-project}/clang/clang.mk | 15 +++-------- .../{ => llvm-project}/compiler-rt/Config.in | 0 .../compiler-rt/compiler-rt.hash | 2 +- .../compiler-rt/compiler-rt.mk | 9 +++---- .../0001-support-out-of-tree-build.patch | 0 package/{ => llvm-project}/libclc/Config.in | 0 package/{ => llvm-project}/libclc/libclc.hash | 2 +- package/{ => llvm-project}/libclc/libclc.mk | 4 +-- package/{ => llvm-project}/lld/Config.in.host | 0 package/{ => llvm-project}/lld/lld.hash | 2 +- package/{ => llvm-project}/lld/lld.mk | 13 +++------- .../llvm-project/llvm-cmake/llvm-cmake.hash | 2 ++ package/llvm-project/llvm-cmake/llvm-cmake.mk | 16 ++++++++++++ .../llvm-libunwind/llvm-libunwind.hash | 3 +++ .../llvm-libunwind/llvm-libunwind.mk | 18 +++++++++++++ package/llvm-project/llvm-project.mk | 11 ++++++++ package/{ => llvm-project}/llvm/Config.in | 0 package/{ => llvm-project}/llvm/llvm.hash | 2 +- package/{ => llvm-project}/llvm/llvm.mk | 26 ++++++++++--------- .../llvm/0001-nfc-Fix-missing-include.patch | 24 ----------------- .../spirv-llvm-translator.hash | 2 +- .../spirv-llvm-translator.mk | 4 +-- 28 files changed, 101 insertions(+), 87 deletions(-) rename package/{ => llvm-project}/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch (100%) rename package/{ => llvm-project}/clang/Config.in (100%) rename package/{ => llvm-project}/clang/clang.hash (52%) rename package/{ => llvm-project}/clang/clang.mk (89%) rename package/{ => llvm-project}/compiler-rt/Config.in (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.hash (50%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.mk (82%) rename package/{ => llvm-project}/libclc/0001-support-out-of-tree-build.patch (100%) rename package/{ => llvm-project}/libclc/Config.in (100%) rename package/{ => llvm-project}/libclc/libclc.hash (51%) rename package/{ => llvm-project}/libclc/libclc.mk (92%) rename package/{ => llvm-project}/lld/Config.in.host (100%) rename package/{ => llvm-project}/lld/lld.hash (52%) rename package/{ => llvm-project}/lld/lld.mk (61%) create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.hash create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.mk create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.hash create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.mk create mode 100644 package/llvm-project/llvm-project.mk rename package/{ => llvm-project}/llvm/Config.in (100%) rename package/{ => llvm-project}/llvm/llvm.hash (52%) rename package/{ => llvm-project}/llvm/llvm.mk (94%) delete mode 100644 package/llvm/0001-nfc-Fix-missing-include.patch -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:02:52 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:02:52 +0000 Subject: [Buildroot] [PATCH v2 01/11] package/llvm-project: new group for llvm packages Message-ID: To make updating easier in the future, group all llvm projects in one subfolder and define some variables for all of them. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- package/llvm-project/llvm-project.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 package/llvm-project/llvm-project.mk diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk new file mode 100644 index 0000000000..7ba89bb605 --- /dev/null +++ b/package/llvm-project/llvm-project.mk @@ -0,0 +1,10 @@ +################################################################################ +# +# llvm-project +# +################################################################################ + +LLVM_PROJECT_VERSION = 11.1.0 +LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) + +include $(sort $(wildcard package/llvm-project/*/*.mk)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:04:05 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:04:05 +0000 Subject: [Buildroot] [PATCH v2 02/11] package/llvm: move to llvm-project folder Message-ID: To make updating easier, move llvm into the llvm-project folder and use the defined information. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 6 +++--- package/Config.in | 2 +- .../llvm/0001-nfc-Fix-missing-include.patch | 0 package/{ => llvm-project}/llvm/Config.in | 0 package/{ => llvm-project}/llvm/llvm.hash | 0 package/{ => llvm-project}/llvm/llvm.mk | 5 ++--- 6 files changed, 6 insertions(+), 7 deletions(-) rename package/{ => llvm-project}/llvm/0001-nfc-Fix-missing-include.patch (100%) rename package/{ => llvm-project}/llvm/Config.in (100%) rename package/{ => llvm-project}/llvm/llvm.hash (100%) rename package/{ => llvm-project}/llvm/llvm.mk (98%) diff --git a/DEVELOPERS b/DEVELOPERS index c8183b2290..8763fde182 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1610,7 +1610,7 @@ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ F: package/lld/ -F: package/llvm/ +F: package/llvm-project/llvm/ F: package/python-cython/ F: package/python-pycups/ F: package/python-raven/ @@ -2544,7 +2544,7 @@ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ -F: package/llvm/ +F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ F: package/mesa3d/ @@ -2956,7 +2956,7 @@ N: Valentin Korenblit F: package/clang/ F: package/clinfo/ F: package/libclc/ -F: package/llvm/ +F: package/llvm-project/llvm/ N: Vanya Sergeev F: package/lua-periphery/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..3b7d4a9448 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2069,7 +2069,7 @@ comment "linux-pam plugins" source "package/libpam-tacplus/Config.in" endif source "package/liquid-dsp/Config.in" - source "package/llvm/Config.in" + source "package/llvm-project/llvm/Config.in" source "package/lttng-libust/Config.in" source "package/matio/Config.in" source "package/mpc/Config.in" diff --git a/package/llvm/0001-nfc-Fix-missing-include.patch b/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch similarity index 100% rename from package/llvm/0001-nfc-Fix-missing-include.patch rename to package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch diff --git a/package/llvm/Config.in b/package/llvm-project/llvm/Config.in similarity index 100% rename from package/llvm/Config.in rename to package/llvm-project/llvm/Config.in diff --git a/package/llvm/llvm.hash b/package/llvm-project/llvm/llvm.hash similarity index 100% rename from package/llvm/llvm.hash rename to package/llvm-project/llvm/llvm.hash diff --git a/package/llvm/llvm.mk b/package/llvm-project/llvm/llvm.mk similarity index 98% rename from package/llvm/llvm.mk rename to package/llvm-project/llvm/llvm.mk index 977c0a08c2..1adad17b16 100644 --- a/package/llvm/llvm.mk +++ b/package/llvm-project/llvm/llvm.mk @@ -4,9 +4,8 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -LLVM_VERSION = 11.1.0 -LLVM_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_VERSION) +LLVM_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_SITE = $(LLVM_PROJECT_SITE) LLVM_SOURCE = llvm-$(LLVM_VERSION).src.tar.xz LLVM_LICENSE = Apache-2.0 with exceptions LLVM_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:07:02 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:07:02 +0000 Subject: [Buildroot] [PATCH v2 03/11] package/lld: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 2 +- package/Config.in.host | 2 +- package/{ => llvm-project}/lld/Config.in.host | 0 package/{ => llvm-project}/lld/lld.hash | 0 package/{ => llvm-project}/lld/lld.mk | 5 ++--- 5 files changed, 4 insertions(+), 5 deletions(-) rename package/{ => llvm-project}/lld/Config.in.host (100%) rename package/{ => llvm-project}/lld/lld.hash (100%) rename package/{ => llvm-project}/lld/lld.mk (87%) diff --git a/DEVELOPERS b/DEVELOPERS index 8763fde182..d4bab1aa36 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1609,7 +1609,7 @@ F: package/clang/ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ -F: package/lld/ +F: package/llvm-project/lld/ F: package/llvm-project/llvm/ F: package/python-cython/ F: package/python-pycups/ diff --git a/package/Config.in.host b/package/Config.in.host index 8ccbf40a84..60ec97a39c 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -50,7 +50,7 @@ menu "Host utilities" source "package/jsmin/Config.in.host" source "package/kmod/Config.in.host" source "package/libp11/Config.in.host" - source "package/lld/Config.in.host" + source "package/llvm-project/lld/Config.in.host" source "package/lpc3250loader/Config.in.host" source "package/lttng-babeltrace/Config.in.host" source "package/lzma-alone/Config.in.host" diff --git a/package/lld/Config.in.host b/package/llvm-project/lld/Config.in.host similarity index 100% rename from package/lld/Config.in.host rename to package/llvm-project/lld/Config.in.host diff --git a/package/lld/lld.hash b/package/llvm-project/lld/lld.hash similarity index 100% rename from package/lld/lld.hash rename to package/llvm-project/lld/lld.hash diff --git a/package/lld/lld.mk b/package/llvm-project/lld/lld.mk similarity index 87% rename from package/lld/lld.mk rename to package/llvm-project/lld/lld.mk index 4bf903cda0..46ec3b13ff 100644 --- a/package/lld/lld.mk +++ b/package/llvm-project/lld/lld.mk @@ -4,9 +4,8 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -LLD_VERSION = 11.1.0 -LLD_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLD_VERSION) +LLD_VERSION = $(LLVM_PROJECT_VERSION) +LLD_SITE = $(LLVM_PROJECT_SITE) LLD_SOURCE = lld-$(LLD_VERSION).src.tar.xz LLD_LICENSE = Apache-2.0 with exceptions LLD_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:07:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:07:54 +0000 Subject: [Buildroot] [PATCH v2 04/11] package/clang: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 6 +++--- package/Config.in | 2 +- ...-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch | 0 package/{ => llvm-project}/clang/Config.in | 0 package/{ => llvm-project}/clang/clang.hash | 0 package/{ => llvm-project}/clang/clang.mk | 7 +++---- package/llvm-project/llvm-project.mk | 3 ++- 7 files changed, 9 insertions(+), 9 deletions(-) rename package/{ => llvm-project}/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch (100%) rename package/{ => llvm-project}/clang/Config.in (100%) rename package/{ => llvm-project}/clang/clang.hash (100%) rename package/{ => llvm-project}/clang/clang.mk (96%) diff --git a/DEVELOPERS b/DEVELOPERS index d4bab1aa36..d516f585d8 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1605,10 +1605,10 @@ F: support/testing/tests/package/test_python_aexpect.py N: Joseph Kogut F: package/at-spi2-atk/ F: package/at-spi2-core/ -F: package/clang/ F: package/earlyoom/ F: package/gconf/ F: package/libnss/ +F: package/llvm-project/clang/ F: package/llvm-project/lld/ F: package/llvm-project/llvm/ F: package/python-cython/ @@ -2525,7 +2525,6 @@ F: package/alure/ F: package/aubio/ F: package/binutils/ F: package/bullet/ -F: package/clang/ F: package/clinfo/ F: package/efl/ F: package/enet/ @@ -2544,6 +2543,7 @@ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ +F: package/llvm-project/clang/ F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ @@ -2953,9 +2953,9 @@ F: package/gettext-tiny/ F: package/tinyssh/ N: Valentin Korenblit -F: package/clang/ F: package/clinfo/ F: package/libclc/ +F: package/llvm-project/clang/ F: package/llvm-project/llvm/ N: Vanya Sergeev diff --git a/package/Config.in b/package/Config.in index 3b7d4a9448..15dd27796f 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1970,7 +1970,7 @@ menu "Other" source "package/capnproto/Config.in" source "package/cctz/Config.in" source "package/cereal/Config.in" - source "package/clang/Config.in" + source "package/llvm-project/clang/Config.in" source "package/cmocka/Config.in" source "package/compiler-rt/Config.in" source "package/cppcms/Config.in" diff --git a/package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch b/package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch similarity index 100% rename from package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch rename to package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch diff --git a/package/clang/Config.in b/package/llvm-project/clang/Config.in similarity index 100% rename from package/clang/Config.in rename to package/llvm-project/clang/Config.in diff --git a/package/clang/clang.hash b/package/llvm-project/clang/clang.hash similarity index 100% rename from package/clang/clang.hash rename to package/llvm-project/clang/clang.hash diff --git a/package/clang/clang.mk b/package/llvm-project/clang/clang.mk similarity index 96% rename from package/clang/clang.mk rename to package/llvm-project/clang/clang.mk index 3c75f8d6b1..0943e21a8c 100644 --- a/package/clang/clang.mk +++ b/package/llvm-project/clang/clang.mk @@ -4,10 +4,9 @@ # ################################################################################ -# LLVM, Clang and lld should be version bumped together -CLANG_VERSION_MAJOR = 11 -CLANG_VERSION = $(CLANG_VERSION_MAJOR).1.0 -CLANG_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(CLANG_VERSION) +CLANG_VERSION_MAJOR = $(LLVM_PROJECT_VERSION_MAJOR) +CLANG_VERSION = $(LLVM_PROJECT_VERSION) +CLANG_SITE = $(LLVM_PROJECT_SITE) CLANG_SOURCE = clang-$(CLANG_VERSION).src.tar.xz CLANG_LICENSE = Apache-2.0 with exceptions CLANG_LICENSE_FILES = LICENSE.TXT diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk index 7ba89bb605..747a6f5647 100644 --- a/package/llvm-project/llvm-project.mk +++ b/package/llvm-project/llvm-project.mk @@ -4,7 +4,8 @@ # ################################################################################ -LLVM_PROJECT_VERSION = 11.1.0 +LLVM_PROJECT_VERSION_MAJOR = 11 +LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).1.0 LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) include $(sort $(wildcard package/llvm-project/*/*.mk)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:08:34 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:08:34 +0000 Subject: [Buildroot] [PATCH v2 05/11] package/compiler-rt: move to llvm-project subfolder Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 2 +- package/Config.in | 2 +- package/{ => llvm-project}/compiler-rt/Config.in | 0 package/{ => llvm-project}/compiler-rt/compiler-rt.hash | 0 package/{ => llvm-project}/compiler-rt/compiler-rt.mk | 6 ++---- 5 files changed, 4 insertions(+), 6 deletions(-) rename package/{ => llvm-project}/compiler-rt/Config.in (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.hash (100%) rename package/{ => llvm-project}/compiler-rt/compiler-rt.mk (85%) diff --git a/DEVELOPERS b/DEVELOPERS index d516f585d8..e6606408c0 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1966,7 +1966,6 @@ F: package/bridge-utils/ F: package/checkpolicy/ F: package/checksec/ F: package/cgroupfs-mount/ -F: package/compiler-rt/ F: package/crda/ F: package/cunit/ F: package/dacapo/ @@ -2004,6 +2003,7 @@ F: package/libssh2/ F: package/libtalloc/ F: package/libqmi/ F: package/lighttpd/ +F: package/llvm-project/compiler-rt/ F: package/logrotate/ F: package/makedevs/ F: package/memtester/ diff --git a/package/Config.in b/package/Config.in index 15dd27796f..1d48b1448b 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1972,7 +1972,7 @@ menu "Other" source "package/cereal/Config.in" source "package/llvm-project/clang/Config.in" source "package/cmocka/Config.in" - source "package/compiler-rt/Config.in" + source "package/llvm-project/compiler-rt/Config.in" source "package/cppcms/Config.in" source "package/cracklib/Config.in" source "package/dawgdic/Config.in" diff --git a/package/compiler-rt/Config.in b/package/llvm-project/compiler-rt/Config.in similarity index 100% rename from package/compiler-rt/Config.in rename to package/llvm-project/compiler-rt/Config.in diff --git a/package/compiler-rt/compiler-rt.hash b/package/llvm-project/compiler-rt/compiler-rt.hash similarity index 100% rename from package/compiler-rt/compiler-rt.hash rename to package/llvm-project/compiler-rt/compiler-rt.hash diff --git a/package/compiler-rt/compiler-rt.mk b/package/llvm-project/compiler-rt/compiler-rt.mk similarity index 85% rename from package/compiler-rt/compiler-rt.mk rename to package/llvm-project/compiler-rt/compiler-rt.mk index c8ea86e899..84add60801 100644 --- a/package/compiler-rt/compiler-rt.mk +++ b/package/llvm-project/compiler-rt/compiler-rt.mk @@ -4,11 +4,9 @@ # ################################################################################ -# Compiler-RT should be bumped together with LLVM and Clang as the run-time is -# tied to the version of those tools -COMPILER_RT_VERSION = 11.1.0 +COMPILER_RT_VERSION = $(LLVM_PROJECT_VERSION) COMPILER_RT_SOURCE = compiler-rt-$(COMPILER_RT_VERSION).src.tar.xz -COMPILER_RT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(COMPILER_RT_VERSION) +COMPILER_RT_SITE = $(LLVM_PROJECT_SITE) COMPILER_RT_LICENSE = NCSA MIT COMPILER_RT_LICENSE_FILES = LICENSE.TXT COMPILER_RT_DEPENDENCIES = host-clang llvm -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:09:17 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:09:17 +0000 Subject: [Buildroot] [PATCH v2 06/11] package/llvm-project/llvm-cmake: new package Message-ID: This is a small host package containing shared cmake modules that are needed by various projects during configuration. For example llvm 15 needs it. Signed-off-by: Daniel Lang --- package/llvm-project/llvm-cmake/llvm-cmake.hash | 2 ++ package/llvm-project/llvm-cmake/llvm-cmake.mk | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.hash create mode 100644 package/llvm-project/llvm-cmake/llvm-cmake.mk diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.hash b/package/llvm-project/llvm-cmake/llvm-cmake.hash new file mode 100644 index 0000000000..b76013e810 --- /dev/null +++ b/package/llvm-project/llvm-cmake/llvm-cmake.hash @@ -0,0 +1,2 @@ +# locally calculated +sha256 21cf3f52c53dc8b8972122ae35a5c18de09c7df693b48b5cd8553c3e3fed090d cmake-15.0.3.src.tar.xz diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.mk b/package/llvm-project/llvm-cmake/llvm-cmake.mk new file mode 100644 index 0000000000..2527b95063 --- /dev/null +++ b/package/llvm-project/llvm-cmake/llvm-cmake.mk @@ -0,0 +1,16 @@ +################################################################################ +# +# llvm-cmake +# +################################################################################ + +LLVM_CMAKE_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_CMAKE_SITE = $(LLVM_PROJECT_SITE) +LLVM_CMAKE_SOURCE = cmake-$(LLVM_CMAKE_VERSION).src.tar.xz + +define HOST_LLVM_CMAKE_INSTALL_CMDS + mkdir -p $(HOST_DIR)/lib/cmake/llvm + cp -Rv $(@D)/Modules/* $(HOST_DIR)/lib/cmake/llvm +endef + +$(eval $(host-generic-package)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:10:16 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:10:16 +0000 Subject: [Buildroot] [PATCH v2 07/11] package/llvm-project/llvm-libunwind: new package Message-ID: Starting with version 15, lld needs the llvm implementation of libunwind, therefore it is added as a host package. Signed-off-by: Daniel Lang --- .../llvm-libunwind/llvm-libunwind.hash | 3 +++ .../llvm-libunwind/llvm-libunwind.mk | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.hash create mode 100644 package/llvm-project/llvm-libunwind/llvm-libunwind.mk diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash new file mode 100644 index 0000000000..2d6286a40e --- /dev/null +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash @@ -0,0 +1,3 @@ +# locally computed +sha256 0ab6e07bf05359e242e9ea80e4089b819914867fa997a715e324e584bcfdf114 libunwind-15.0.3.src.tar.xz +sha256 b5efebcaca80879234098e52d1725e6d9eb8fb96a19fce625d39184b705f7b6d LICENSE.TXT diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.mk b/package/llvm-project/llvm-libunwind/llvm-libunwind.mk new file mode 100644 index 0000000000..be9965a49a --- /dev/null +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.mk @@ -0,0 +1,18 @@ +################################################################################ +# +# llvm-libunwind +# +################################################################################ + +LLVM_LIBUNWIND_VERSION = $(LLVM_PROJECT_VERSION) +LLVM_LIBUNWIND_SITE = $(LLVM_PROJECT_SITE) +LLVM_LIBUNWIND_SOURCE = libunwind-$(LLVM_LIBUNWIND_VERSION).src.tar.xz +LLVM_LIBUNWIND_LICENSE = Apache-2.0 with exceptions +LLVM_LIBUNWIND_LICENSE_FILES = LICENSE.TXT +LLVM_LIBUNWIND_SUPPORTS_IN_SOURCE_BUILD = NO + +HOST_LLVM_LIBUNWIND_CONF_OPTS += \ + -DCMAKE_MODULE_PATH="$(HOST_DIR)/lib/cmake/llvm" \ + -DLIBUNWIND_INSTALL_HEADERS=ON + +$(eval $(host-cmake-package)) -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:12:02 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:12:02 +0000 Subject: [Buildroot] [PATCH v2 08/11] package/llvm-project: bump to version 15.0.3 Message-ID: - Add new build dependencies to lld and llvm - Drop old config options Signed-off-by: Daniel Lang --- Changes v1 -> v2: - Bump to 15.0.3 instead of 15.0.1 - llvm: use CMAKE_HOST_C_COMPILER instead of HOSTCC --- package/llvm-project/clang/clang.hash | 2 +- package/llvm-project/clang/clang.mk | 8 +------ .../llvm-project/compiler-rt/compiler-rt.hash | 2 +- .../llvm-project/compiler-rt/compiler-rt.mk | 3 ++- package/llvm-project/lld/lld.hash | 2 +- package/llvm-project/lld/lld.mk | 8 +------ .../llvm-project/llvm-cmake/llvm-cmake.hash | 2 +- .../llvm-libunwind/llvm-libunwind.hash | 2 +- package/llvm-project/llvm-project.mk | 4 ++-- .../llvm/0001-nfc-Fix-missing-include.patch | 24 ------------------- package/llvm-project/llvm/llvm.hash | 2 +- package/llvm-project/llvm/llvm.mk | 21 +++++++++------- 12 files changed, 24 insertions(+), 56 deletions(-) delete mode 100644 package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch diff --git a/package/llvm-project/clang/clang.hash b/package/llvm-project/clang/clang.hash index 0136b80664..52c755cfb3 100644 --- a/package/llvm-project/clang/clang.hash +++ b/package/llvm-project/clang/clang.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 0a8288f065d1f57cb6d96da4d2965cbea32edc572aa972e466e954d17148558b clang-11.1.0.src.tar.xz +sha256 96036052694e703d159c995bda203b59d1ff185c6879189b9eba837726e1738c clang-15.0.3.src.tar.xz sha256 ebcd9bbf783a73d05c53ba4d586b8d5813dcdf3bbec50265860ccc885e606f47 LICENSE.TXT diff --git a/package/llvm-project/clang/clang.mk b/package/llvm-project/clang/clang.mk index 0943e21a8c..0bafd6461b 100644 --- a/package/llvm-project/clang/clang.mk +++ b/package/llvm-project/clang/clang.mk @@ -17,13 +17,6 @@ CLANG_INSTALL_STAGING = YES HOST_CLANG_DEPENDENCIES = host-llvm host-libxml2 CLANG_DEPENDENCIES = llvm host-clang -# LLVM >= 9.0 will soon require C++14 support, building llvm 8.x using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_CLANG_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON -CLANG_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON - # This option is needed, otherwise multiple shared libs # (libclangAST.so, libclangBasic.so, libclangFrontend.so, etc.) will # be generated. As a final shared lib containing all these components @@ -62,6 +55,7 @@ CLANG_CONF_OPTS += \ HOST_CLANG_CONF_OPTS += -DLLVM_DIR=$(HOST_DIR)/lib/cmake/llvm \ -DCLANG_DEFAULT_LINKER=$(TARGET_LD) CLANG_CONF_OPTS += -DLLVM_DIR=$(STAGING_DIR)/usr/lib/cmake/llvm \ + -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm \ -DCLANG_TABLEGEN:FILEPATH=$(HOST_DIR)/bin/clang-tblgen \ -DLLVM_TABLEGEN_EXE:FILEPATH=$(HOST_DIR)/bin/llvm-tblgen diff --git a/package/llvm-project/compiler-rt/compiler-rt.hash b/package/llvm-project/compiler-rt/compiler-rt.hash index 8ee010ac5a..fe4e98164b 100644 --- a/package/llvm-project/compiler-rt/compiler-rt.hash +++ b/package/llvm-project/compiler-rt/compiler-rt.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 def1fc00c764cd3abbba925c712ac38860a756a43b696b291f46fee09e453274 compiler-rt-11.1.0.src.tar.xz +sha256 db958eee92d1571d8b7f76c1be8513817f1a888dcf6ced88aca871acfb0eeddd compiler-rt-15.0.3.src.tar.xz sha256 1a8f1058753f1ba890de984e48f0242a3a5c29a6a8f2ed9fd813f36985387e8d LICENSE.TXT diff --git a/package/llvm-project/compiler-rt/compiler-rt.mk b/package/llvm-project/compiler-rt/compiler-rt.mk index 84add60801..026650c7c8 100644 --- a/package/llvm-project/compiler-rt/compiler-rt.mk +++ b/package/llvm-project/compiler-rt/compiler-rt.mk @@ -17,7 +17,8 @@ COMPILER_RT_INSTALL_TARGET = NO COMPILER_RT_CONF_OPTS=-DCOMPILER_RT_STANDALONE_BUILD=OFF \ -DCOMPILER_RT_STANDALONE_BUILD=ON \ -DCOMPILER_RT_DEFAULT_TARGET_TRIPLE=$(GNU_TARGET_NAME) \ - -DLLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config + -DLLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config \ + -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm # The installation of the target runtime libraries defaults to DESTDIR, however # host-clang resources directory needs a link so Clang can find the runtime diff --git a/package/llvm-project/lld/lld.hash b/package/llvm-project/lld/lld.hash index 6d56ffcaab..2d2598dbeb 100644 --- a/package/llvm-project/lld/lld.hash +++ b/package/llvm-project/lld/lld.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 017a788cbe1ecc4a949abf10755870519086d058a2e99f438829aef24f0c66ce lld-11.1.0.src.tar.xz +sha256 cd5d0894a74b957ce78d62212c1df0b3876a7297593aaece6b0512285e3b8732 lld-15.0.3.src.tar.xz sha256 f7891568956e34643eb6a0db1462db30820d40d7266e2a78063f2fe233ece5a0 LICENSE.TXT diff --git a/package/llvm-project/lld/lld.mk b/package/llvm-project/lld/lld.mk index 46ec3b13ff..539dd0bd71 100644 --- a/package/llvm-project/lld/lld.mk +++ b/package/llvm-project/lld/lld.mk @@ -10,13 +10,7 @@ LLD_SOURCE = lld-$(LLD_VERSION).src.tar.xz LLD_LICENSE = Apache-2.0 with exceptions LLD_LICENSE_FILES = LICENSE.TXT LLD_SUPPORTS_IN_SOURCE_BUILD = NO -HOST_LLD_DEPENDENCIES = host-llvm - -# LLVM > 9.0 will soon require C++14 support, building llvm <= 9.0 using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_LLD_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON +HOST_LLD_DEPENDENCIES = host-llvm host-llvm-libunwind # build as static libs as is done in llvm & clang HOST_LLD_CONF_OPTS += -DBUILD_SHARED_LIBS=OFF diff --git a/package/llvm-project/llvm-cmake/llvm-cmake.hash b/package/llvm-project/llvm-cmake/llvm-cmake.hash index b76013e810..862c5d92e8 100644 --- a/package/llvm-project/llvm-cmake/llvm-cmake.hash +++ b/package/llvm-project/llvm-cmake/llvm-cmake.hash @@ -1,2 +1,2 @@ # locally calculated -sha256 a660d1b7d4d2ef9759de6ad360d5fa9eed3625a6548068a97df2dd706edf2dd0 cmake-15.0.1.src.tar.xz +sha256 21cf3f52c53dc8b8972122ae35a5c18de09c7df693b48b5cd8553c3e3fed090d cmake-15.0.3.src.tar.xz diff --git a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash index 2d6286a40e..86775f5dba 100644 --- a/package/llvm-project/llvm-libunwind/llvm-libunwind.hash +++ b/package/llvm-project/llvm-libunwind/llvm-libunwind.hash @@ -1,3 +1,3 @@ # locally computed -sha256 65af59d7cd4672e2c1793402968f803beb3f91a92ad95f8702610a9a07a5ca10 libunwind-15.0.1.src.tar.xz +sha256 0ab6e07bf05359e242e9ea80e4089b819914867fa997a715e324e584bcfdf114 libunwind-15.0.3.src.tar.xz sha256 b5efebcaca80879234098e52d1725e6d9eb8fb96a19fce625d39184b705f7b6d LICENSE.TXT diff --git a/package/llvm-project/llvm-project.mk b/package/llvm-project/llvm-project.mk index 747a6f5647..5859ff7cfc 100644 --- a/package/llvm-project/llvm-project.mk +++ b/package/llvm-project/llvm-project.mk @@ -4,8 +4,8 @@ # ################################################################################ -LLVM_PROJECT_VERSION_MAJOR = 11 -LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).1.0 +LLVM_PROJECT_VERSION_MAJOR = 15 +LLVM_PROJECT_VERSION = $(LLVM_PROJECT_VERSION_MAJOR).0.3 LLVM_PROJECT_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LLVM_PROJECT_VERSION) include $(sort $(wildcard package/llvm-project/*/*.mk)) diff --git a/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch b/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch deleted file mode 100644 index 62111ca138..0000000000 --- a/package/llvm-project/llvm/0001-nfc-Fix-missing-include.patch +++ /dev/null @@ -1,24 +0,0 @@ -From b498303066a63a203d24f739b2d2e0e56dca70d1 Mon Sep 17 00:00:00 2001 -From: serge-sans-paille -Date: Tue, 10 Nov 2020 14:55:25 +0100 -Subject: [PATCH] [nfc] Fix missing include - -[Retrieved (and backported) from: -https://github.com/llvm/llvm-project/commit/b498303066a63a203d24f739b2d2e0e56dca70d1] -Signed-off-by: Fabrice Fontaine ---- - llvm/utils/benchmark/src/benchmark_register.h | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/utils/benchmark/src/benchmark_register.h b/utils/benchmark/src/benchmark_register.h -index 0705e219f2fa2..4caa5ad4da079 100644 ---- a/utils/benchmark/src/benchmark_register.h -+++ b/utils/benchmark/src/benchmark_register.h -@@ -1,6 +1,7 @@ - #ifndef BENCHMARK_REGISTER_H - #define BENCHMARK_REGISTER_H - -+#include - #include - - #include "check.h" diff --git a/package/llvm-project/llvm/llvm.hash b/package/llvm-project/llvm/llvm.hash index e7f79492de..df9aa88411 100644 --- a/package/llvm-project/llvm/llvm.hash +++ b/package/llvm-project/llvm/llvm.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 ce8508e318a01a63d4e8b3090ab2ded3c598a50258cc49e2625b9120d4c03ea5 llvm-11.1.0.src.tar.xz +sha256 c39aec729662416dcbf0bfe53a9786b34e7d93d02908a0779a2f6d83ad0a4a27 llvm-15.0.3.src.tar.xz sha256 8d85c1057d742e597985c7d4e6320b015a9139385cff4cbae06ffc0ebe89afee LICENSE.TXT diff --git a/package/llvm-project/llvm/llvm.mk b/package/llvm-project/llvm/llvm.mk index 1adad17b16..5751ba4f7f 100644 --- a/package/llvm-project/llvm/llvm.mk +++ b/package/llvm-project/llvm/llvm.mk @@ -14,15 +14,16 @@ LLVM_SUPPORTS_IN_SOURCE_BUILD = NO LLVM_INSTALL_STAGING = YES # LLVM >= 9.0 can use python3 to build. -HOST_LLVM_DEPENDENCIES = host-python3 +HOST_LLVM_DEPENDENCIES = host-python3 host-llvm-cmake LLVM_DEPENDENCIES = host-llvm -# LLVM >= 9.0 will soon require C++14 support, building llvm 8.x using a -# toolchain using gcc < 5.1 gives an error but actually still works. Setting -# this option makes it still build with gcc >= 4.8. -# https://reviews.llvm.org/D57264 -HOST_LLVM_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON -LLVM_CONF_OPTS += -DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=ON +# Path to cmake modules from host-llvm-cmake +HOST_LLVM_CONF_OPTS += -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm +LLVM_CONF_OPTS += -DCMAKE_MODULE_PATH=$(HOST_DIR)/lib/cmake/llvm + +# Assembly files for x64 in lib/Support/BLAKE3 need to be compiled +# by a C compiler +HOST_LLVM_CONF_OPTS += -DCMAKE_ASM_COMPILER="$(CMAKE_HOST_C_COMPILER)" # Don't build clang libcxx libcxxabi lldb compiler-rt lld polly as llvm subprojects # This flag assumes that projects are checked out side-by-side and not nested @@ -259,7 +260,8 @@ HOST_LLVM_CONF_OPTS += \ -DLLVM_INCLUDE_EXAMPLES=OFF \ -DLLVM_INCLUDE_DOCS=OFF \ -DLLVM_INCLUDE_GO_TESTS=OFF \ - -DLLVM_INCLUDE_TESTS=OFF + -DLLVM_INCLUDE_TESTS=OFF \ + -DLLVM_INCLUDE_BENCHMARKS=OFF LLVM_CONF_OPTS += \ -DLLVM_BUILD_EXAMPLES=OFF \ -DLLVM_BUILD_DOCS=OFF \ @@ -270,7 +272,8 @@ LLVM_CONF_OPTS += \ -DLLVM_INCLUDE_EXAMPLES=OFF \ -DLLVM_INCLUDE_DOCS=OFF \ -DLLVM_INCLUDE_GO_TESTS=OFF \ - -DLLVM_INCLUDE_TESTS=OFF + -DLLVM_INCLUDE_TESTS=OFF \ + -DLLVM_INCLUDE_BENCHMARKS=OFF # Copy llvm-config (host variant) to STAGING_DIR # llvm-config (host variant) returns include and lib directories -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:13:19 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:13:19 +0000 Subject: [Buildroot] [PATCH v2 09/11] package/spirv-llvm-translator: bump to version 15.0.0-2 Message-ID: Signed-off-by: Daniel Lang --- Changes v1 -> v2: - Bump to latest commit that supports llvm15 --- package/spirv-llvm-translator/spirv-llvm-translator.hash | 2 +- package/spirv-llvm-translator/spirv-llvm-translator.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.hash b/package/spirv-llvm-translator/spirv-llvm-translator.hash index edfca1ea02..0e06d36de1 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.hash +++ b/package/spirv-llvm-translator/spirv-llvm-translator.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 bdd7cb677b9fcaaff1cce2153de9d69298f136edecaef3631915614bb5db09a1 spirv-llvm-translator-v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2.tar.gz +sha256 c2b29bc495fe14a21e871481b5a25d7abed93df8fa3fc22e996e39d9c1373280 spirv-llvm-translator-v15.0.0-2-g2478920a91bff5c59ca65ea9bce8ffaa5af8fa88.tar.gz sha256 e3bc36440fc927c62d5cc24efeefe225a14d4e34ffeb0c92e430625cce9ee444 LICENSE.TXT diff --git a/package/spirv-llvm-translator/spirv-llvm-translator.mk b/package/spirv-llvm-translator/spirv-llvm-translator.mk index 159f7d3b52..d920999b28 100644 --- a/package/spirv-llvm-translator/spirv-llvm-translator.mk +++ b/package/spirv-llvm-translator/spirv-llvm-translator.mk @@ -5,8 +5,8 @@ ################################################################################ # Generate version string using: -# git describe --tags --match 'v11*' --abbrev=40 origin/llvm_release_110 -SPIRV_LLVM_TRANSLATOR_VERSION = v11.0.0-297-ga619b34bce55360d79fea9058a93ded04919f2b2 +# git describe --tags --match 'v15*' --abbrev=40 origin/llvm_release_150 +SPIRV_LLVM_TRANSLATOR_VERSION = v15.0.0-2-g2478920a91bff5c59ca65ea9bce8ffaa5af8fa88 SPIRV_LLVM_TRANSLATOR_SITE = $(call github,KhronosGroup,SPIRV-LLVM-Translator,$(SPIRV_LLVM_TRANSLATOR_VERSION)) SPIRV_LLVM_TRANSLATOR_LICENSE = NCSA SPIRV_LLVM_TRANSLATOR_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:13:56 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:13:56 +0000 Subject: [Buildroot] [PATCH v2 10/11] package/libclc: move to llvm-project subfolder and bump to 15.0.3 Message-ID: To make version bumping easier, move llvm to a new llvm-project subfolder and specify site and version for the project. Signed-off-by: Daniel Lang --- Changes v1 -> v2: - libclc: Add missing change to package/Config.in - Bump to 15.0.3 instead of 15.0.1 --- DEVELOPERS | 4 ++-- package/Config.in | 2 +- .../libclc/0001-support-out-of-tree-build.patch | 0 package/{ => llvm-project}/libclc/Config.in | 0 package/{ => llvm-project}/libclc/libclc.hash | 2 +- package/{ => llvm-project}/libclc/libclc.mk | 4 ++-- 6 files changed, 6 insertions(+), 6 deletions(-) rename package/{ => llvm-project}/libclc/0001-support-out-of-tree-build.patch (100%) rename package/{ => llvm-project}/libclc/Config.in (100%) rename package/{ => llvm-project}/libclc/libclc.hash (51%) rename package/{ => llvm-project}/libclc/libclc.mk (92%) diff --git a/DEVELOPERS b/DEVELOPERS index e6606408c0..6dbf4fe7a5 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2538,12 +2538,12 @@ F: package/irrlicht/ F: package/liblinear/ F: package/lensfun/ F: package/libbpf/ -F: package/libclc/ F: package/libgta/ F: package/libiec61850/ F: package/libspatialindex/ F: package/linux-syscall-support/ F: package/llvm-project/clang/ +F: package/llvm-project/libclc/ F: package/llvm-project/llvm/ F: package/lugaru/ F: package/mcelog/ @@ -2954,8 +2954,8 @@ F: package/tinyssh/ N: Valentin Korenblit F: package/clinfo/ -F: package/libclc/ F: package/llvm-project/clang/ +F: package/llvm-project/libclc/ F: package/llvm-project/llvm/ N: Vanya Sergeev diff --git a/package/Config.in b/package/Config.in index 1d48b1448b..882e296533 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2010,7 +2010,7 @@ menu "Other" source "package/libcap/Config.in" source "package/libcap-ng/Config.in" source "package/libcgroup/Config.in" - source "package/libclc/Config.in" + source "package/llvm-project/libclc/Config.in" source "package/libcofi/Config.in" source "package/libcorrect/Config.in" source "package/libcrossguid/Config.in" diff --git a/package/libclc/0001-support-out-of-tree-build.patch b/package/llvm-project/libclc/0001-support-out-of-tree-build.patch similarity index 100% rename from package/libclc/0001-support-out-of-tree-build.patch rename to package/llvm-project/libclc/0001-support-out-of-tree-build.patch diff --git a/package/libclc/Config.in b/package/llvm-project/libclc/Config.in similarity index 100% rename from package/libclc/Config.in rename to package/llvm-project/libclc/Config.in diff --git a/package/libclc/libclc.hash b/package/llvm-project/libclc/libclc.hash similarity index 51% rename from package/libclc/libclc.hash rename to package/llvm-project/libclc/libclc.hash index c496291d81..7140884f6c 100644 --- a/package/libclc/libclc.hash +++ b/package/llvm-project/libclc/libclc.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 8f0213e52e2fcaca3dfcc438f05d0e15e9b3c96fd6b0994a802b267dc1047a1d libclc-13.0.1.src.tar.xz +sha256 07e8a2b31e07a8cc8a976a6bfd87797d2543d5a9530f449755bf5119acbdbe8e libclc-15.0.3.src.tar.xz sha256 3c536c052db9afd997809e38785c9f2a9e54e2892330fa7c5b438e18a7413479 LICENSE.TXT diff --git a/package/libclc/libclc.mk b/package/llvm-project/libclc/libclc.mk similarity index 92% rename from package/libclc/libclc.mk rename to package/llvm-project/libclc/libclc.mk index 5d246cf4f8..9f303d6d2f 100644 --- a/package/libclc/libclc.mk +++ b/package/llvm-project/libclc/libclc.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBCLC_VERSION = 13.0.1 -LIBCLC_SITE = https://github.com/llvm/llvm-project/releases/download/llvmorg-$(LIBCLC_VERSION) +LIBCLC_VERSION = $(LLVM_PROJECT_VERSION) +LIBCLC_SITE = $(LLVM_PROJECT_SITE) LIBCLC_SOURCE = libclc-$(LIBCLC_VERSION).src.tar.xz LIBCLC_LICENSE = Apache-2.0 with exceptions or MIT LIBCLC_LICENSE_FILES = LICENSE.TXT -- 2.25.1 From d.lang at abatec.at Tue Oct 25 06:14:54 2022 From: d.lang at abatec.at (Lang Daniel) Date: Tue, 25 Oct 2022 06:14:54 +0000 Subject: [Buildroot] [PATCH v2 11/11] DEVELOPERS: add Daniel Lang for llvm-project Message-ID: >From 709898d42f115a5403f54d3fb0dd04e1d5ee087d Mon Sep 17 00:00:00 2001 From: Daniel Lang Date: Wed, 28 Sep 2022 16:02:38 +0200 Subject: [PATCH v2 11/11] DEVELOPERS: add Daniel Lang for llvm-project Signed-off-by: Daniel Lang --- Changes v1 -> v2: - No changes --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 6dbf4fe7a5..19d584015f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -633,6 +633,7 @@ F: package/dacapo/ N: Daniel Lang F: package/dbus-cxx/ F: package/paho-mqtt-cpp/ +F: package/llvm-project/ N: Damien Lanson F: package/libvdpau/ -- 2.25.1 From afshin.nasser at gmail.com Tue Oct 25 06:53:56 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Tue, 25 Oct 2022 10:23:56 +0330 Subject: [Buildroot] [PATCH] python-wheel: new package Message-ID: <20221025065356.1838-1-afshin.nasser@gmail.com> Signed-off-by: Nasser Afshin --- package/Config.in | 1 + package/python-wheel/Config.in | 15 +++++++++++++++ package/python-wheel/python-wheel.hash | 5 +++++ package/python-wheel/python-wheel.mk | 14 ++++++++++++++ 4 files changed, 35 insertions(+) create mode 100644 package/python-wheel/Config.in create mode 100644 package/python-wheel/python-wheel.hash create mode 100644 package/python-wheel/python-wheel.mk diff --git a/package/Config.in b/package/Config.in index b60e7700ad..56b1a08d8b 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1062,6 +1062,7 @@ menu "External python modules" source "package/python-websocket-client/Config.in" source "package/python-websockets/Config.in" source "package/python-werkzeug/Config.in" + source "package/python-wheel/Config.in" source "package/python-whoosh/Config.in" source "package/python-wrapt/Config.in" source "package/python-ws4py/Config.in" diff --git a/package/python-wheel/Config.in b/package/python-wheel/Config.in new file mode 100644 index 0000000000..225d7529a4 --- /dev/null +++ b/package/python-wheel/Config.in @@ -0,0 +1,15 @@ +config BR2_PACKAGE_PYTHON_WHEEL + bool "python-wheel" + help + This library is the reference implementation of the Python wheel + packaging standard, as defined in PEP 427. + + It has two different roles: + 1. A setuptools extension for building wheels that provides the bdist_wheel + setuptools command + 2. A command line tool for working with wheel files + + It should be noted that wheel is not intended to be used as a library, and as + such there is no stable, public API. + + https://github.com/pypa/wheel diff --git a/package/python-wheel/python-wheel.hash b/package/python-wheel/python-wheel.hash new file mode 100644 index 0000000000..be82f63a30 --- /dev/null +++ b/package/python-wheel/python-wheel.hash @@ -0,0 +1,5 @@ +# md5 from https://pypi.python.org/pypi/wheel/json +md5 f490f1399e5903706cb1d4fbed9ecb28 wheel-0.37.1.tar.gz +# Locally computed +sha256 e9a504e793efbca1b8e0e9cb979a249cf4a0a7b5b8c9e8b65a5e39d49529c1c4 wheel-0.37.1.tar.gz +sha256 cca9e20c6af1fcfbf69408f377769286cbeebcded336100c9b4a3f35fbe635e4 LICENSE.txt diff --git a/package/python-wheel/python-wheel.mk b/package/python-wheel/python-wheel.mk new file mode 100644 index 0000000000..d8fab54867 --- /dev/null +++ b/package/python-wheel/python-wheel.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-wheel +# +################################################################################ + +PYTHON_WHEEL_VERSION = 0.37.1 +PYTHON_WHEEL_SOURCE = wheel-$(PYTHON_WHEEL_VERSION).tar.gz +PYTHON_WHEEL_SITE = https://files.pythonhosted.org/packages/c0/6c/9f840c2e55b67b90745af06a540964b73589256cb10cc10057c87ac78fc2 +PYTHON_WHEEL_SETUP_TYPE = distutils +PYTHON_WHEEL_LICENSE = MIT +PYTHON_WHEEL_LICENSE_FILES = LICENSE.txt + +$(eval $(python-package)) -- 2.17.1 From afshin.nasser at gmail.com Tue Oct 25 06:55:39 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Tue, 25 Oct 2022 10:25:39 +0330 Subject: [Buildroot] [PATCH] python-pycrate: new package Message-ID: <20221025065539.4646-1-afshin.nasser@gmail.com> Signed-off-by: Nasser Afshin --- package/Config.in | 1 + package/python-pycrate/Config.in | 8 ++++++++ package/python-pycrate/python-pycrate.hash | 4 ++++ package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ 4 files changed, 26 insertions(+) create mode 100644 package/python-pycrate/Config.in create mode 100644 package/python-pycrate/python-pycrate.hash create mode 100644 package/python-pycrate/python-pycrate.mk diff --git a/package/Config.in b/package/Config.in index 56b1a08d8b..2443b7bb27 100644 --- a/package/Config.in +++ b/package/Config.in @@ -951,6 +951,7 @@ menu "External python modules" source "package/python-pyasn1-modules/Config.in" source "package/python-pycli/Config.in" source "package/python-pycparser/Config.in" + source "package/python-pycrate/Config.in" source "package/python-pycrypto/Config.in" source "package/python-pycryptodomex/Config.in" source "package/python-pydal/Config.in" diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in new file mode 100644 index 0000000000..9e2123d4dd --- /dev/null +++ b/package/python-pycrate/Config.in @@ -0,0 +1,8 @@ +config BR2_PACKAGE_PYTHON_PYCRATE + bool "python-pycrate" + help + It provides basically a runtime for encoding and decoding data structures, + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core + network. + + https://github.com/P1sec/pycrate/ diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash new file mode 100644 index 0000000000..24aa51d8e4 --- /dev/null +++ b/package/python-pycrate/python-pycrate.hash @@ -0,0 +1,4 @@ +# md5 from https://pypi.python.org/pypi/pycrate/json +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz +# Locally computed +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk new file mode 100644 index 0000000000..41ce6c18f2 --- /dev/null +++ b/package/python-pycrate/python-pycrate.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# python-pycrate +# +################################################################################ + +PYTHON_PYCRATE_VERSION = 0.5.5 +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df +PYTHON_PYCRATE_SETUP_TYPE = distutils +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later + +$(eval $(python-package)) -- 2.17.1 From sebastien.szymanski at armadeus.com Tue Oct 25 07:16:34 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?q?S=C3=A9bastien=20Szymanski?=) Date: Tue, 25 Oct 2022 09:16:34 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221025071634.8563-1-sebastien.szymanski@armadeus.com> Drop patch 0001 as it is not needed anymore: https://github.com/cenobites/flask-jsonrpc/commit/2426b7f6fabeef9eb3a8dc6570e2fce33a30f98e Signed-off-by: S?bastien Szymanski --- ...-Move-pytest-runner-to-tests_require.patch | 32 ------------------- .../python-flask-jsonrpc.hash | 4 +-- .../python-flask-jsonrpc.mk | 4 +-- 3 files changed, 4 insertions(+), 36 deletions(-) delete mode 100644 package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch diff --git a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch b/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch deleted file mode 100644 index 8b6712e601..0000000000 --- a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 8f07768085fa4c8d21dbe27805b7238e67d3aea5 Mon Sep 17 00:00:00 2001 -From: James Hilliard -Date: Tue, 17 May 2022 15:52:58 -0600 -Subject: [PATCH] Move pytest-runner to tests_require - -This isn't a build requirement so it shouldn't be under -setup_requires. - -Signed-off-by: James Hilliard -[Upstream status: -https://github.com/cenobites/flask-jsonrpc/pull/227] ---- - setup.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 197d6c9..f23c472 100755 ---- a/setup.py -+++ b/setup.py -@@ -42,8 +42,8 @@ setuptools.setup( - 'async': ['Flask[async]>=1.0.0,<3.0'], - 'dotenv': ['Flask[dotenv]>=1.0.0,<3.0'], - }, -- setup_requires=['pytest-runner'], - tests_require=[ -+ 'pytest-runner', - 'mock==4.0.3', - 'coverage==6.3.2;python_version>"3.6"', - 'coverage<6.2;python_version<="3.6"', --- -2.36.0 - diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools -- 2.37.4 From angelo at amarulasolutions.com Tue Oct 25 07:33:06 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 25 Oct 2022 09:33:06 +0200 Subject: [Buildroot] QT6 Qmake Message-ID: Hello Jesse, I was trying to port qt6knx to qt6, the project is not converted to cmake but still based on qmake. I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is somewhat broken, the following snip shows the differences between qmake for QT5 and QT6: angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake -query QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_PREFIX/raw:/usr QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_ARCHDATA/raw:/usr QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_DATA/raw:/usr QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc QT_INSTALL_DOCS/raw:/usr/doc QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 QT_INSTALL_HEADERS/raw:/usr/include/qt5 QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib QT_INSTALL_LIBS/raw:/usr/lib QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec QT_INSTALL_LIBEXECS/raw:/usr/libexec QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin QT_INSTALL_BINS/raw:/usr/bin QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests QT_INSTALL_TESTS/raw:/usr/tests QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports QT_INSTALL_IMPORTS/raw:/usr/imports QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml QT_INSTALL_QML/raw:/usr/qml QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations QT_INSTALL_TRANSLATIONS/raw:/usr/translations QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr QT_INSTALL_CONFIGURATION/raw:/usr QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib QMAKE_SPEC:linux-g++ QMAKE_XSPEC:devices/linux-buildroot-g++ QMAKE_VERSION:3.1 QT_VERSION:5.15.8 angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake -query QT_SYSROOT: QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations QT_INSTALL_CONFIGURATION: QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib QMAKE_SPEC:linux-g++ QMAKE_XSPEC:linux-g++ QMAKE_VERSION:3.1 QT_VERSION:6.4.0 Any clue? I'm looking into fixing qmake for QT6 anyway Thanks! -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From sebastien.szymanski at armadeus.com Tue Oct 25 07:11:08 2022 From: sebastien.szymanski at armadeus.com (=?UTF-8?Q?S=c3=a9bastien_Szymanski?=) Date: Tue, 25 Oct 2022 09:11:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-flask-jsonrpc: bump to version 2.2.2 In-Reply-To: <20221024230532.438bb514@windsurf> References: <20221024082719.6213-1-sebastien.szymanski@armadeus.com> <20221024230532.438bb514@windsurf> Message-ID: Hello Thomas, On 10/24/22 23:05, Thomas Petazzoni wrote: > On Mon, 24 Oct 2022 10:27:19 +0200 > S?bastien Szymanski wrote: > >> Signed-off-by: S?bastien Szymanski >> --- >> package/python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 ++-- >> package/python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 ++-- >> 2 files changed, 4 insertions(+), 4 deletions(-) > > Thanks for the patch, but did you test it? The > 0001-Move-pytest-runner-to-tests_require.patch patch no longer applies: > >>>> python-flask-jsonrpc 2.2.2 Extracting > gzip -d -c /home/thomas/dl/python-flask-jsonrpc/Flask-JSONRPC-2.2.2.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2 -xf - >>>> python-flask-jsonrpc 2.2.2 Patching > > Applying 0001-Move-pytest-runner-to-tests_require.patch using patch: > patching file setup.py > Hunk #1 FAILED at 42. > 1 out of 1 hunk FAILED -- saving rejects to file setup.py.rej > make: *** [package/pkg-generic.mk:251: /home/thomas/projets/buildroot/output/build/python-flask-jsonrpc-2.2.2/.stamp_patched] Error 1 > > Could you have a look? Oops, sorry... Sure! I will send a v2! Regards, > > Thanks! > > Thomas -- S?bastien Szymanski, Armadeus Systems Software engineer From yann.morin at orange.com Tue Oct 25 08:08:06 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Tue, 25 Oct 2022 10:08:06 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> Message-ID: <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> Norbert, All, Thank you for your feedback! :-) On 2022-10-23 23:47 +0200, Norbert Lange spake thusly: > Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > While the /var factory seems to be working in most cases, there have > > been suggestions that it may be slightly and subtely borken in some > > (rare? edge?) cases, especially about symlinks. > > Had to dig up an old post of mine (not the only one touching on that), > some issues are: > > - it kills previous files in /usr/share/factory/var > - it doesn't handle symlinks (just think of /var already containing > a symlink into that factory), > especially relative ones. > - it has sideeffects with tmpfile .confs that are ordered before and > touch /var > - it has sideeffects with other PRE_CMD_HOOKS touching /var > > (Post is from mid 2020, so forgive me if my memory is fuzzy, > but I had already practical problems with atleast the last 2 of those). Forgive me if my memory is fuzzy, but I don't recall seeing any patch to fix those issues with the factory... ;-) > To me this is just not a robust solution Yet, there are some people for whom the factory does work just fine (first-hand experience here, and besides your comments, we have had noone reporting actual issues in the 5+ years we've implemented the factory, AFAICR). So, we do not want to break the situation for them. Once the overlayfs scheme has been in place for some time and it got exercised, we can consider switching the default, and eventualy we can get rid of the factory if it proves to be unfixable (again, without concrete examples that do break it, we can devise a fix). If we can't yet agree on how to integrate the overlayfs based scheme, we need a way to sort out the conflict between the factory and running tmpfiles at build time, which is what patches 1-4 are for, since they do not change the current behaviour, but clarifies the current situation. So, those are the patches where we should concentrate for now. Patches 5-6 introduce the new overlayfs scheme as an alternative to the factory, a new feature, so they can go in later... And yes, I did test the overlayfs scheme in our use-case here, and yes it does work as advertised, so yes, this is a good feature! > > An other solution is to pre-populate /var at build time, by way of > > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > > runtime. > > > > This is slightly accrobatic, though, and requires a few hoops: > > - first, we create a tmpfs > > - there, we create three directories: > > - the first to bind-mount /var as it is, i.e. read-only > > - the second as the read-write upper for the overlayfs > > - the third as the "working area" for the overlays > ..and we depend on overlayfs I just had to enable overlayfs in the kernel, and it worked without any other package. FTR, I have added new runtime tests to validate both the factory and the overlayfs scenarii. I will post them in the coming days when I've cleaned them up (have to run locally, as my gtilab free minutes are exhausted): https://gitlab.com/ymorin/buildroot/-/tree/systemdify-var [--SNIP--] > > Systemd units courtesy Norbert, with slight tweaks and cleanups. > > Yeah, Im not fine with the tweaks to drop the symlink > /usr/lib/systemd/system/var.mount -> ../var.mount > (and the added intstall section) > > First in the same local-fs "target" you could mount /etc, > making this a complicated hidden issue, I don't know > when systemd reloads, I believe only after that target. > > Second, this should be enabled by default, and > in a way even when /etc is borked/not ready. So, currently, Buildroot does not work (does nothing to officialy work) seemlessly with an empty /etc, because we explicitly run "systemctl preset-all" at the end of the build (as a prefs_cmd), and that fills in /etc/systemd/system/. As you said, supporting an empty /etc will require *way* more explicit support in Buildroot > If a user really wants to disable the mount, he can mask it. That is true if using either the symlink or the install section, no? I.e. they'd just provide a preset that reads: disable rootfs-bindount-var.service disable var.mount > > Signed-off-by: Yann E. MORIN > > Cc: Norbert Lange > > Cc: Romain Naour > > Cc: Je?re?my Rosen [--SNIP--] > > --- /dev/null > > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > > @@ -0,0 +1,21 @@ > > +[Unit] > > +Description=Bind-mount variable storage (/var) > > +Documentation=man:file-hierarchy(7) > > +ConditionPathIsSymbolicLink=!/var > > +# ConditionPathIsReadWrite=!/var > > +DefaultDependencies=no > > +Conflicts=umount.target > > +Before=local-fs.target umount.target > > +After=local-fs-pre.target > > A am actually considering changing that to: > > Before=local-fs-pre.target umount.target > # After=local-fs-pre.target No reason to keep comment in units. > It does not depend an anything, It does depend on /run being mounted. > so no technical reason to order > it after anything. And it is technically a preparation for the > actual local-fs.target. This. We do not have a vision of the grand scheme of how systemd organises stuff, what each .target means and how they depend on each others. Maybe my search skills are getting rusted as time passes, but I could never find such a design doc, and it lacks sorely. Manpages are only so good as to explain each details, but they do not provide a global overview... [--SNIP--] > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > > + bool "mount an overlayfs backed by a tmpfs" > > + help > > + Mount an overlayfs on /var, with the upper as a tmpfs. > > + > > + To use a persistent storage, provide your own systemd unit(s) > > + that eventually mount that persistent storage on > > + /run/varoverlay/upper/ > perhaps pull in or depend on overlayfs here I did not need anything beside enabling overlayfs in the kernel (see the runtime tests branch I pointed to above). > Generally the unit and directory names could be more logical, Yes, I agree that we should have a kind of naming scheme for this. But I have no good idea... What I was thinking, though, is that we maybe should make dotted directories, i.e. /run/.varoverlay/{lower,upper,work} > and for allowing the user to specify a custom mount > by reading an EnvironmentFile in the rootfs-bindmount-var unit. It was my understanding that users could provide their own unit(s), something that would ultimately end up with a mount unit like: # cat run_varoverlay_upper.mount [Unit] After=rootfs-bindmount-var.service BindsTo=rootfs-bindmount-var.service [Mount] What=/dev/something Where=/run/varoverlay/upper Type=ext4-or-whatever [Install] BoundBy=var.mount WantedBy=var.mount That way, they do not have to override any of our units; they would just intersperse their unit in the existing dependency graph, between the rootfs-bindmount-var.service and the var.mount. And the content of the filesystem on /dev/something would only get the content of /var, not the {lower,upper,work} directories, which could be a bit confusing. > Planning to add some more comments next week, should find dome time here, > huge commit msgs to get through. Commit messages are important, because they do provide all the rationale and reasoning behind a change. They will be there forever, and in the future, we can refer to them to understand why the code eneded up like it is, and with new insight then, we can understand where our reasoning was flawed, or if it was correct, how the environment around has changed. I consider a good commit log more important than the actual change. Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From jesseevg at gmail.com Tue Oct 25 08:14:01 2022 From: jesseevg at gmail.com (Jesse Van Gavere) Date: Tue, 25 Oct 2022 10:14:01 +0200 Subject: [Buildroot] QT6 Qmake In-Reply-To: References: Message-ID: Op di 25 okt. 2022 om 09:33 schreef Angelo Compagnucci < angelo at amarulasolutions.com>: > > Hello Jesse, > > I was trying to port qt6knx to qt6, the project is not converted to cmake but still based on qmake. > I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is somewhat broken, the following snip shows the differences between qmake for QT5 and QT6: > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake -query > QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_PREFIX/raw:/usr > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_ARCHDATA/raw:/usr > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_DATA/raw:/usr > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc > QT_INSTALL_DOCS/raw:/usr/doc > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 > QT_INSTALL_HEADERS/raw:/usr/include/qt5 > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib > QT_INSTALL_LIBS/raw:/usr/lib > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec > QT_INSTALL_LIBEXECS/raw:/usr/libexec > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin > QT_INSTALL_BINS/raw:/usr/bin > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests > QT_INSTALL_TESTS/raw:/usr/tests > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins > QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins > QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports > QT_INSTALL_IMPORTS/raw:/usr/imports > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml > QT_INSTALL_QML/raw:/usr/qml > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations > QT_INSTALL_TRANSLATIONS/raw:/usr/translations > QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > QT_INSTALL_CONFIGURATION/raw:/usr > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib > QMAKE_SPEC:linux-g++ > QMAKE_XSPEC:devices/linux-buildroot-g++ > QMAKE_VERSION:3.1 > QT_VERSION:5.15.8 > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake -query > QT_SYSROOT: > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations > QT_INSTALL_CONFIGURATION: > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > QMAKE_SPEC:linux-g++ > QMAKE_XSPEC:linux-g++ > QMAKE_VERSION:3.1 > QT_VERSION:6.4.0 > > > Any clue? > > I'm looking into fixing qmake for QT6 anyway > > Thanks! > -- > > Angelo Compagnucci > > Software Engineer > > angelo at amarulasolutions.com > __________________________________ > Amarula Solutions SRL > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 (0)42 243 5310 > info at amarulasolutions.com > > www.amarulasolutions.com > > [`as] https://www.amarulasolutions.com| Hello Angelo, Yes this was one of the parts I couldn't get working initially for which I opted to set it aside for the time being, I dreaded the day this would come as it was a bit of a PITA! As for why it doesn't work, you'll see that the qmake_xspec is linux-g++ in qt6 and devices/linux-buildroot-g++ in your qt5 build, what was done in qt5 was that our own qmake device spec was made to work with the BR compiler/flags, you'll see this in qt5.mk where the qmake command is defined as QT5_QMAKE = $(HOST_DIR)/bin/qmake -spec devices/linux-buildroot-g++ As for how to do it properly, some good reference here is https://wiki.qt.io/Cross-Compile_Qt_6_for_Raspberry_Pi as this shows how cross-compiling is now generally done and how they pass the device spec during building for the target. You can also look under the qt5base folder for qt.conf.in, qmake.conf.in qplatformdefs.h, that together with QT5_INSTALL_QT_CONF in qt5.mk and QT5BASE_CONFIGURE_CMDS in qt5base.mk (more specifically line 335-345) This from what I remember is most if not all that is involved in building the buildroot specific device spec to get qmake working, I hope that at least gives you somewhere to start looking. As for why I couldn't get it working myself at the time, I tried to implement all of the things mentioned above, I had a device spec and the files looked good, I passed it to the qt6 target building with -DQT_QMAKE_TARGET_MKSPEC=devices/linux-buildroot-g++ and everything done in qt5 to get it working was there (or so I thought at least), but in the end there seemed to be some path issues where qmake was looking at the host qt6 instead of the target qt6 and I never really figured it out, the whole host/target building of qt6 was quite the PITA in and of itself, but I'll give it another crack since there's some interest, good to see someone wants to pick it up too! I do think I have some work related to this from previous attempts on one of my dev branches, I'll keep in touch if I find something to send your way, maybe it helps you to have some starting point. Best regards, Jesse -------------- next part -------------- An HTML attachment was scrubbed... URL: From yegorslists at googlemail.com Tue Oct 25 08:33:19 2022 From: yegorslists at googlemail.com (Yegor Yefremov) Date: Tue, 25 Oct 2022 10:33:19 +0200 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: <20221025065539.4646-1-afshin.nasser@gmail.com> References: <20221025065539.4646-1-afshin.nasser@gmail.com> Message-ID: Hi Nasser, On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > Signed-off-by: Nasser Afshin > --- > package/Config.in | 1 + > package/python-pycrate/Config.in | 8 ++++++++ > package/python-pycrate/python-pycrate.hash | 4 ++++ > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ An entry to the DEVELOPERS file is missing. > 4 files changed, 26 insertions(+) > create mode 100644 package/python-pycrate/Config.in > create mode 100644 package/python-pycrate/python-pycrate.hash > create mode 100644 package/python-pycrate/python-pycrate.mk > > diff --git a/package/Config.in b/package/Config.in > index 56b1a08d8b..2443b7bb27 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -951,6 +951,7 @@ menu "External python modules" > source "package/python-pyasn1-modules/Config.in" > source "package/python-pycli/Config.in" > source "package/python-pycparser/Config.in" > + source "package/python-pycrate/Config.in" > source "package/python-pycrypto/Config.in" > source "package/python-pycryptodomex/Config.in" > source "package/python-pydal/Config.in" > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > new file mode 100644 > index 0000000000..9e2123d4dd > --- /dev/null > +++ b/package/python-pycrate/Config.in > @@ -0,0 +1,8 @@ > +config BR2_PACKAGE_PYTHON_PYCRATE > + bool "python-pycrate" > + help > + It provides basically a runtime for encoding and decoding data structures, > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > + network. > + > + https://github.com/P1sec/pycrate/ > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > new file mode 100644 > index 0000000000..24aa51d8e4 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.hash > @@ -0,0 +1,4 @@ > +# md5 from https://pypi.python.org/pypi/pycrate/json > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > +# Locally computed > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > new file mode 100644 > index 0000000000..41ce6c18f2 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# python-pycrate > +# > +################################################################################ > + > +PYTHON_PYCRATE_VERSION = 0.5.5 > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > +PYTHON_PYCRATE_SETUP_TYPE = distutils SETUP_TYPE is setuptools. Have you tried this command? ./utils/scanpypi pycrate It will do almost everything you need. The thing that is missing is licensing info because there is no license file in the source archive. Best regards, Yegor > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > + > +$(eval $(python-package)) > -- > 2.17.1 > From angelo at amarulasolutions.com Tue Oct 25 08:36:22 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Tue, 25 Oct 2022 10:36:22 +0200 Subject: [Buildroot] QT6 Qmake In-Reply-To: References: Message-ID: On Tue, Oct 25, 2022 at 10:14 AM Jesse Van Gavere wrote: > Op di 25 okt. 2022 om 09:33 schreef Angelo Compagnucci < > angelo at amarulasolutions.com>: > > > > Hello Jesse, > > > > I was trying to port qt6knx to qt6, the project is not converted to > cmake but still based on qmake. > > I was able to compile it on x86 using qt6 but qmake in buildroot QT6 is > somewhat broken, the following snip shows the differences between qmake for > QT5 and QT6: > > > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin/qmake > -query > > > QT_SYSROOT:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot > > > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_PREFIX/raw:/usr > > > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_ARCHDATA/raw:/usr > > > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_DATA/raw:/usr > > > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/doc > > QT_INSTALL_DOCS/raw:/usr/doc > > > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/qt5 > > QT_INSTALL_HEADERS/raw:/usr/include/qt5 > > > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib > > QT_INSTALL_LIBS/raw:/usr/lib > > > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/libexec > > QT_INSTALL_LIBEXECS/raw:/usr/libexec > > > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin > > QT_INSTALL_BINS/raw:/usr/bin > > > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/tests > > QT_INSTALL_TESTS/raw:/usr/tests > > > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/plugins > > QT_INSTALL_PLUGINS/raw:/usr/lib/qt/plugins > > > QT_INSTALL_IMPORTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/imports > > QT_INSTALL_IMPORTS/raw:/usr/imports > > > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/qml > > QT_INSTALL_QML/raw:/usr/qml > > > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/translations > > QT_INSTALL_TRANSLATIONS/raw:/usr/translations > > > QT_INSTALL_CONFIGURATION:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr > > QT_INSTALL_CONFIGURATION/raw:/usr > > > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > > QT_INSTALL_EXAMPLES/raw:/usr/lib/qt/examples > > > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/qt/examples > > QT_INSTALL_DEMOS/raw:/usr/lib/qt/examples > > > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > > > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host > > > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/bin > > > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt5base/host/lib > > QMAKE_SPEC:linux-g++ > > QMAKE_XSPEC:devices/linux-buildroot-g++ > > QMAKE_VERSION:3.1 > > QT_VERSION:5.15.8 > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > > angelo at angeloc:~/DEV/BUILDROOT/br_qemu_arm$ > /home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/qt6base/host/bin/qmake > -query > > QT_SYSROOT: > > > QT_INSTALL_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_ARCHDATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_INSTALL_DOCS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/doc > > > QT_INSTALL_HEADERS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/include > > > QT_INSTALL_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > > > QT_INSTALL_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > > > QT_INSTALL_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > > > QT_INSTALL_TESTS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/tests > > > QT_INSTALL_PLUGINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/plugins > > > QT_INSTALL_QML:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/qml > > > QT_INSTALL_TRANSLATIONS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/translations > > QT_INSTALL_CONFIGURATION: > > > QT_INSTALL_EXAMPLES:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > > > QT_INSTALL_DEMOS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/examples > > > QT_HOST_PREFIX:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_HOST_DATA:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host > > > QT_HOST_BINS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/bin > > > QT_HOST_LIBEXECS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/libexec > > > QT_HOST_LIBS:/home/angelo/DEV/BUILDROOT/br_qemu_arm/per-package/host-qt6base/host/lib > > QMAKE_SPEC:linux-g++ > > QMAKE_XSPEC:linux-g++ > > QMAKE_VERSION:3.1 > > QT_VERSION:6.4.0 > > > > > > Any clue? > > > > I'm looking into fixing qmake for QT6 anyway > > > > Thanks! > > -- > > > > Angelo Compagnucci > > > > Software Engineer > > > > angelo at amarulasolutions.com > > __________________________________ > > Amarula Solutions SRL > > > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > > > T. +39 (0)42 243 5310 > > info at amarulasolutions.com > > > > www.amarulasolutions.com > > > > [`as] https://www.amarulasolutions.com| > Hello Angelo, > > Yes this was one of the parts I couldn't get working initially for which I > opted to set it aside for the time being, I dreaded the day this would come > as it was a bit of a PITA! > As for why it doesn't work, you'll see that the qmake_xspec is linux-g++ > in qt6 and devices/linux-buildroot-g++ in your qt5 build, what was done in > qt5 was that our own qmake device spec was made to work with the BR > compiler/flags, you'll see this in qt5.mk where the qmake command is > defined as > > QT5_QMAKE = $(HOST_DIR)/bin/qmake -spec devices/linux-buildroot-g++ > > As for how to do it properly, some good reference here is > https://wiki.qt.io/Cross-Compile_Qt_6_for_Raspberry_Pi as this shows how > cross-compiling is now generally done and how they pass the device spec > during building for the target. > You can also look under the qt5base folder for qt.conf.in, qmake.conf.in > qplatformdefs.h, that together with QT5_INSTALL_QT_CONF in qt5.mk and > QT5BASE_CONFIGURE_CMDS in qt5base.mk (more specifically line 335-345) > This from what I remember is most if not all that is involved in building > the buildroot specific device spec to get qmake working, I hope that at > least gives you somewhere to start looking. > > As for why I couldn't get it working myself at the time, I tried to > implement all of the things mentioned above, I had a device spec and the > files looked good, I passed it to the qt6 target building with > -DQT_QMAKE_TARGET_MKSPEC=devices/linux-buildroot-g++ and everything done in > qt5 to get it working was there (or so I thought at least), but in the end > there seemed to be some path issues where qmake was looking at the host qt6 > instead of the target qt6 and I never really figured it out, the whole > host/target building of qt6 was quite the PITA in and of itself, but I'll > give it another crack since there's some interest, good to see someone > wants to pick it up too! > > I do think I have some work related to this from previous attempts on one > of my dev branches, I'll keep in touch if I find something to send your > way, maybe it helps you to have some starting point. > So we share the very same frustration I guess! I did exactly all the things you mentioned, and I couldn't make it working. Let's try harder, then! Thanks for your quick reply! > > Best regards, > Jesse > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at korsgaard.com Tue Oct 25 09:38:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 11:38:50 +0200 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <871qqy4foa.fsf@dell.be.48ers.dk> (Peter Korsgaard's message of "Sun, 23 Oct 2022 19:23:49 +0200") References: <20221022112243.31889-1-neal.frager@amd.com> <871qqy4foa.fsf@dell.be.48ers.dk> Message-ID: <87eduw1bv9.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Neal" == Neal Frager writes: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. >> https://github.com/Xilinx/bootgen >> Signed-off-by: Neal Frager >> --- V1-> V2: >> - improved build statement to support older hosts >> - added bootgen.hash > Committed, thanks. As expected, this fails to build on setups with modern flex / configs where host-flex is built, so I've sent a patch with the fix from the PR: https://github.com/Xilinx/bootgen/pull/20 -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 25 09:37:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 11:37:51 +0200 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex Message-ID: <20221025093752.3520434-1-peter@korsgaard.com> Fixes: http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) Fix it by using normal local #include statements by: sed -i 's//"FlexLexer.h"/g' * Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 Signed-off-by: Peter Korsgaard --- ...x-build-on-machines-with-modern-flex.patch | 133 ++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch diff --git a/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch new file mode 100644 index 0000000000..ea82f5e70c --- /dev/null +++ b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch @@ -0,0 +1,133 @@ +From 7251dce3dc974c7372e7024ade3e8a455266cfd2 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Fri, 18 Mar 2022 09:02:31 +0100 +Subject: [PATCH] Fix build on machines with modern flex + +Bootgen embeds an old version of flex, but uses the system include syntax +(#include <>) to reference it, causing conflicts on systems with the +development headers for a modern flex version installed, leading to build +issues like: + +../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': +../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) + +Fix it by using normal local #include statements by: + +sed -i 's//"FlexLexer.h"/g' * + +Signed-off-by: Peter Korsgaard +[Submitted upstream: https://github.com/Xilinx/bootgen/pull/20] +--- + FlexLexer.h | 6 +++--- + bif.yy.cpp | 2 +- + bifscanner.h | 2 +- + cmdoptions.yy.cpp | 2 +- + cmdoptionsscanner.h | 2 +- + reginit.yy.cpp | 2 +- + reginitscanner.h | 2 +- + 7 files changed, 9 insertions(+), 9 deletions(-) + +diff --git a/FlexLexer.h b/FlexLexer.h +index b115b5d..1c0386f 100755 +--- a/FlexLexer.h ++++ b/FlexLexer.h +@@ -33,15 +33,15 @@ + // + // If you want to create multiple lexer classes, you use the -P flag + // to rename each yyFlexLexer to some other xxFlexLexer. You then +-// include in your other sources once per lexer class: ++// include "FlexLexer.h" in your other sources once per lexer class: + // + // #undef yyFlexLexer + // #define yyFlexLexer xxFlexLexer +-// #include ++// #include "FlexLexer.h" + // + // #undef yyFlexLexer + // #define yyFlexLexer zzFlexLexer +-// #include ++// #include "FlexLexer.h" + // ... + + #ifndef __FLEX_LEXER_H +diff --git a/bif.yy.cpp b/bif.yy.cpp +index 7dd0841..9e09267 100644 +--- a/bif.yy.cpp ++++ b/bif.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/bifscanner.h b/bifscanner.h +index a6ec9e4..ded78da 100755 +--- a/bifscanner.h ++++ b/bifscanner.h +@@ -28,7 +28,7 @@ + #if ! defined(yyFlexLexerOnce) + #undef yyFlexLexer + #define yyFlexLexer bifFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/cmdoptions.yy.cpp b/cmdoptions.yy.cpp +index 6ee80de..1acfcce 100644 +--- a/cmdoptions.yy.cpp ++++ b/cmdoptions.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/cmdoptionsscanner.h b/cmdoptionsscanner.h +index a48af09..e02c1f1 100755 +--- a/cmdoptionsscanner.h ++++ b/cmdoptionsscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/reginit.yy.cpp b/reginit.yy.cpp +index 8422867..ff088f9 100644 +--- a/reginit.yy.cpp ++++ b/reginit.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/reginitscanner.h b/reginitscanner.h +index 4e78af9..23177be 100755 +--- a/reginitscanner.h ++++ b/reginitscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +-- +2.30.2 + -- 2.30.2 From neal.frager at amd.com Tue Oct 25 09:50:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 09:50:16 +0000 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex In-Reply-To: <20221025093752.3520434-1-peter@korsgaard.com> References: <20221025093752.3520434-1-peter@korsgaard.com> Message-ID: > Fixes: > http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ > Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: > ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': > ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) > Fix it by using normal local #include statements by: > sed -i 's//"FlexLexer.h"/g' * > Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 > Signed-off-by: Peter Korsgaard Reviewed-by: Neal Frager Thank you Peter! Best regards, Neal Frager AMD From neal.frager at amd.com Tue Oct 25 09:51:19 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 09:51:19 +0000 Subject: [Buildroot] [PATCH v2 1/1] package/bootgen: add bootgen host package In-Reply-To: <87eduw1bv9.fsf@dell.be.48ers.dk> References: <20221022112243.31889-1-neal.frager@amd.com> <871qqy4foa.fsf@dell.be.48ers.dk> <87eduw1bv9.fsf@dell.be.48ers.dk> Message-ID: Hi Peter, >>>>> "Peter" == Peter Korsgaard writes: >>>>> "Neal" == Neal Frager writes: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. >> https://github.com/Xilinx/bootgen >> Signed-off-by: Neal Frager >> --- V1-> V2: >> - improved build statement to support older hosts >> - added bootgen.hash > Committed, thanks. > As expected, this fails to build on setups with modern flex / configs where host-flex is built, so I've sent a patch with the fix from the PR: > https://github.com/Xilinx/bootgen/pull/20 > -- > Bye, Peter Korsgaard Thank you Peter. I will confirm once this is committed in the bootgen master branch. Best regards, Neal Frager AMD From simon.richter at ptwdosimetry.com Tue Oct 25 10:02:00 2022 From: simon.richter at ptwdosimetry.com (Simon Richter) Date: Tue, 25 Oct 2022 12:02:00 +0200 Subject: [Buildroot] [PATCH v2] support/download/cargo-post-process: cargo output for vendor config In-Reply-To: <20221021163133.GO2503@scaer> References: <20221021163133.GO2503@scaer> Message-ID: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> Use the output of `cargo vendor` to generate the vendor configuration. Fixes the need to patch the generated configuration if there are non-crates.io dependencies. Note: `cargo vendor` currently prints a newline before it prints the needed configuration. This is fixed in +nightly, will end up in +stable soon and must be considered when updating cargo. See: https://github.com/rust-lang/cargo/pull/11273 Until then it is needed to remove this first line to make sure that the contents of .cargo/config will be the same as they were generated with the earlier version of the script. Thus, the hashes of the packages that use this script remain the same. Signed-off-by: Simon Richter --- support/download/cargo-post-process | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process index a4a4718a2a..186e9eb69b 100755 --- a/support/download/cargo-post-process +++ b/support/download/cargo-post-process @@ -1,6 +1,7 @@ #!/usr/bin/env bash set -e +set -o pipefail . "${0%/*}/helpers" @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" # Do the Cargo vendoring pushd "${base_name}" > /dev/null -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR # Create the local .cargo/config with vendor info +# +# The first line of the output to stdout is empty. +# So skip it to have the file start with the vendoring +# configuration (`tail --lines=+2`). +# +# NOTE: +# There is a patch for cargo to remove the first empty line: +# See: https://github.com/rust-lang/cargo/pull/11273 +# +# The patch already landed in +nightly and will end up +# in +stable soon. +# +# -> When updating rust/cargo, the call to `tail` must be removed. +# mkdir -p .cargo/ -cat <.cargo/config -[source.crates-io] -replace-with = "vendored-sources" +cargo vendor \ + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ + --locked VENDOR \ + | tail --lines=+2 | tee .cargo/config -[source.vendored-sources] -directory = "VENDOR" -EOF popd > /dev/null post_process_repack "$(pwd)" "${base_name}" "${output}" -- 2.38.1 From nolange79 at gmail.com Tue Oct 25 12:12:09 2022 From: nolange79 at gmail.com (Norbert Lange) Date: Tue, 25 Oct 2022 14:12:09 +0200 Subject: [Buildroot] [PATCH 6/6 v3] system: add option to use an overlayfs on /var on a r/o root w/ systemd In-Reply-To: <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> References: <14736_1666122204_634F01DB_14736_494_1_b3efa290e26b85b54ab27728bf190316cf2ab1ee.1666122184.git.yann.morin@orange.com> <18023_1666685288_63579968_18023_321_4_20221025080806.GC1657509@tl-lnx-nyma7486> Message-ID: Am Di., 25. Okt. 2022 um 10:08 Uhr schrieb : > > Norbert, All, > > Thank you for your feedback! :-) > > On 2022-10-23 23:47 +0200, Norbert Lange spake thusly: > > Am Di., 18. Okt. 2022 um 21:43 Uhr schrieb : > > > While the /var factory seems to be working in most cases, there have > > > been suggestions that it may be slightly and subtely borken in some > > > (rare? edge?) cases, especially about symlinks. > > > > Had to dig up an old post of mine (not the only one touching on that), > > some issues are: > > > > - it kills previous files in /usr/share/factory/var > > - it doesn't handle symlinks (just think of /var already containing > > a symlink into that factory), > > especially relative ones. > > - it has sideeffects with tmpfile .confs that are ordered before and > > touch /var > > - it has sideeffects with other PRE_CMD_HOOKS touching /var > > > > (Post is from mid 2020, so forgive me if my memory is fuzzy, > > but I had already practical problems with atleast the last 2 of those). > > Forgive me if my memory is fuzzy, but I don't recall seeing any patch to > fix those issues with the factory... ;-) I am not sure a complete fix for the factory would be a computable problem, know the implementation then you can "break it". there are way simpler solutions for "make a copy of that stuff". > > > To me this is just not a robust solution > > Yet, there are some people for whom the factory does work just fine > (first-hand experience here, and besides your comments, we have had > noone reporting actual issues in the 5+ years we've implemented the > factory, AFAICR). So, we do not want to break the situation for them. > > Once the overlayfs scheme has been in place for some time and it got > exercised, we can consider switching the default, and eventualy we can > get rid of the factory if it proves to be unfixable (again, without > concrete examples that do break it, we can devise a fix). Thats a sunken cost fallacy ;) > > If we can't yet agree on how to integrate the overlayfs based scheme, we > need a way to sort out the conflict between the factory and running > tmpfiles at build time, which is what patches 1-4 are for, since they do > not change the current behaviour, but clarifies the current situation. > > So, those are the patches where we should concentrate for now. > > Patches 5-6 introduce the new overlayfs scheme as an alternative to the > factory, a new feature, so they can go in later... > > And yes, I did test the overlayfs scheme in our use-case here, and yes > it does work as advertised, so yes, this is a good feature! Glad to hear, I am going to clean it up a bit > > > > An other solution is to pre-populate /var at build time, by way of > > > calling systemd-tmpfiles, and mounting an overlayfs on-top of it at > > > runtime. > > > > > > This is slightly accrobatic, though, and requires a few hoops: > > > - first, we create a tmpfs > > > - there, we create three directories: > > > - the first to bind-mount /var as it is, i.e. read-only > > > - the second as the read-write upper for the overlayfs > > > - the third as the "working area" for the overlays > > ..and we depend on overlayfs > > I just had to enable overlayfs in the kernel, and it worked without any > other package. I meant its no option if the kernel does not provide the overlayfs, which would be an argument against it. > > FTR, I have added new runtime tests to validate both the factory and > the overlayfs scenarii. I will post them in the coming days when I've > cleaned them up (have to run locally, as my gtilab free minutes are > exhausted): > > https://gitlab.com/ymorin/buildroot/-/tree/systemdify-var > > [--SNIP--] > > > Systemd units courtesy Norbert, with slight tweaks and cleanups. > > > > Yeah, Im not fine with the tweaks to drop the symlink > > /usr/lib/systemd/system/var.mount -> ../var.mount > > (and the added intstall section) > > > > First in the same local-fs "target" you could mount /etc, > > making this a complicated hidden issue, I don't know > > when systemd reloads, I believe only after that target. > > > > Second, this should be enabled by default, and > > in a way even when /etc is borked/not ready. > > So, currently, Buildroot does not work (does nothing to officialy work) > seemlessly with an empty /etc, because we explicitly run "systemctl > preset-all" at the end of the build (as a prefs_cmd), and that fills in > /etc/systemd/system/. > > As you said, supporting an empty /etc will require *way* more explicit > support in Buildroot It helps if there arent any additional blocks in the way, systemd envisions your rootfs "master" to live under /usr. Key services should be statically linked (like for ex. the dbus.socket). > > If a user really wants to disable the mount, he can mask it. > > That is true if using either the symlink or the install section, no? > I.e. they'd just provide a preset that reads: > > disable rootfs-bindount-var.service > disable var.mount Yeah, it should be a "hard" default. And not affected by the usuall en/disable/preset operations. the mask/unmask operations are the "hard" stuff. Lets turn it around: what arguments can you muster for using the install functionality? > > > > Signed-off-by: Yann E. MORIN > > > Cc: Norbert Lange > > > Cc: Romain Naour > > > Cc: Je?re?my Rosen > [--SNIP--] > > > --- /dev/null > > > +++ b/package/skeleton-init-systemd/overlayfs/rootfs-bindmount-var.service > > > @@ -0,0 +1,21 @@ > > > +[Unit] > > > +Description=Bind-mount variable storage (/var) > > > +Documentation=man:file-hierarchy(7) > > > +ConditionPathIsSymbolicLink=!/var > > > +# ConditionPathIsReadWrite=!/var > > > +DefaultDependencies=no > > > +Conflicts=umount.target > > > +Before=local-fs.target umount.target > > > +After=local-fs-pre.target > > > > A am actually considering changing that to: > > > > Before=local-fs-pre.target umount.target > > # After=local-fs-pre.target > > No reason to keep comment in units. For displaying the change, expect a series from me later. > > > It does not depend an anything, > > It does depend on /run being mounted. Which is a *given invariant* with systemd, one of the first things that happen. > > > so no technical reason to order > > it after anything. And it is technically a preparation for the > > actual local-fs.target. > > This. > > We do not have a vision of the grand scheme of how systemd organises > stuff, what each .target means and how they depend on each others. Maybe > my search skills are getting rusted as time passes, but I could never > find such a design doc, and it lacks sorely. Manpages are only so good > as to explain each details, but they do not provide a global overview... Like that? : https://www.freedesktop.org/software/systemd/man/bootup.html > > [--SNIP--] > > > +config BR2_INIT_SYSTEMD_VAR_OVERLAYFS > > > + bool "mount an overlayfs backed by a tmpfs" > > > + help > > > + Mount an overlayfs on /var, with the upper as a tmpfs. > > > + > > > + To use a persistent storage, provide your own systemd unit(s) > > > + that eventually mount that persistent storage on > > > + /run/varoverlay/upper/ > > perhaps pull in or depend on overlayfs here > > I did not need anything beside enabling overlayfs in the kernel (see the > runtime tests branch I pointed to above). > > > Generally the unit and directory names could be more logical, > > Yes, I agree that we should have a kind of naming scheme for this. But I > have no good idea... > > What I was thinking, though, is that we maybe should make dotted > directories, i.e. /run/.varoverlay/{lower,upper,work} id namespace it like /run/.buildroot/overlay_var_{lower,upper,work}. > > > and for allowing the user to specify a custom mount > > by reading an EnvironmentFile in the rootfs-bindmount-var unit. > > It was my understanding that users could provide their own unit(s), > something that would ultimately end up with a mount unit like: > > # cat run_varoverlay_upper.mount > [Unit] > After=rootfs-bindmount-var.service > BindsTo=rootfs-bindmount-var.service > > [Mount] > What=/dev/something > Where=/run/varoverlay/upper > Type=ext4-or-whatever > > [Install] > BoundBy=var.mount > WantedBy=var.mount > > That way, they do not have to override any of our units; they would just > intersperse their unit in the existing dependency graph, between the > rootfs-bindmount-var.service and the var.mount. > > And the content of the filesystem on /dev/something would only get the > content of /var, not the {lower,upper,work} directories, which could be > a bit confusing. Yeah, I havent thought about a customizing. Not sure if it wouldnt be better to provide a simple one and a customizable one. ie. the simple one doesnt have to wait for udev, loaded kernel modules for blockdevices or network connections to do its job. > > > Planning to add some more comments next week, should find dome time here, > > huge commit msgs to get through. > > Commit messages are important, because they do provide all the rationale > and reasoning behind a change. They will be there forever, and in the > future, we can refer to them to understand why the code eneded up like > it is, and with new insight then, we can understand where our reasoning > was flawed, or if it was correct, how the environment around has > changed. > > I consider a good commit log more important than the actual change. Wasnt meant as complaint. Regards, Norbert From peter at korsgaard.com Tue Oct 25 13:33:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 15:33:04 +0200 Subject: [Buildroot] [PATCH] package/booten: Fix build on machines with modern flex / host-flex In-Reply-To: <20221025093752.3520434-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 25 Oct 2022 11:37:51 +0200") References: <20221025093752.3520434-1-peter@korsgaard.com> Message-ID: <87a65k110v.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Fixes: > http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ > Bootgen embeds an old version of flex, but uses the system include syntax > (#include <>) to reference it, causing conflicts on systems with the > development headers for a modern flex version installed, leading to build > issues like: > ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': > ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' > (operand types are 'std::istream' {aka 'std::basic_istream'} and > 'std::istream*' {aka 'std::basic_istream*'}) > Fix it by using normal local #include statements by: > sed -i 's//"FlexLexer.h"/g' * > Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Tue Oct 25 13:32:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Tue, 25 Oct 2022 15:32:57 +0200 Subject: [Buildroot] [git commit] package/booten: Fix build on machines with modern flex / host-flex Message-ID: <20221025133322.AAF1A87047@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6381ae865fb2ed8d7f840925610ded76774e25e7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/ Bootgen embeds an old version of flex, but uses the system include syntax (#include <>) to reference it, causing conflicts on systems with the development headers for a modern flex version installed, leading to build issues like: ../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': ../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) Fix it by using normal local #include statements by: sed -i 's//"FlexLexer.h"/g' * Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20 Signed-off-by: Peter Korsgaard Reviewed-by: Neal Frager Signed-off-by: Peter Korsgaard --- ...01-Fix-build-on-machines-with-modern-flex.patch | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) diff --git a/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch new file mode 100644 index 0000000000..ea82f5e70c --- /dev/null +++ b/package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch @@ -0,0 +1,133 @@ +From 7251dce3dc974c7372e7024ade3e8a455266cfd2 Mon Sep 17 00:00:00 2001 +From: Peter Korsgaard +Date: Fri, 18 Mar 2022 09:02:31 +0100 +Subject: [PATCH] Fix build on machines with modern flex + +Bootgen embeds an old version of flex, but uses the system include syntax +(#include <>) to reference it, causing conflicts on systems with the +development headers for a modern flex version installed, leading to build +issues like: + +../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()': +../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream'} and 'std::istream*' {aka 'std::basic_istream*'}) + +Fix it by using normal local #include statements by: + +sed -i 's//"FlexLexer.h"/g' * + +Signed-off-by: Peter Korsgaard +[Submitted upstream: https://github.com/Xilinx/bootgen/pull/20] +--- + FlexLexer.h | 6 +++--- + bif.yy.cpp | 2 +- + bifscanner.h | 2 +- + cmdoptions.yy.cpp | 2 +- + cmdoptionsscanner.h | 2 +- + reginit.yy.cpp | 2 +- + reginitscanner.h | 2 +- + 7 files changed, 9 insertions(+), 9 deletions(-) + +diff --git a/FlexLexer.h b/FlexLexer.h +index b115b5d..1c0386f 100755 +--- a/FlexLexer.h ++++ b/FlexLexer.h +@@ -33,15 +33,15 @@ + // + // If you want to create multiple lexer classes, you use the -P flag + // to rename each yyFlexLexer to some other xxFlexLexer. You then +-// include in your other sources once per lexer class: ++// include "FlexLexer.h" in your other sources once per lexer class: + // + // #undef yyFlexLexer + // #define yyFlexLexer xxFlexLexer +-// #include ++// #include "FlexLexer.h" + // + // #undef yyFlexLexer + // #define yyFlexLexer zzFlexLexer +-// #include ++// #include "FlexLexer.h" + // ... + + #ifndef __FLEX_LEXER_H +diff --git a/bif.yy.cpp b/bif.yy.cpp +index 7dd0841..9e09267 100644 +--- a/bif.yy.cpp ++++ b/bif.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/bifscanner.h b/bifscanner.h +index a6ec9e4..ded78da 100755 +--- a/bifscanner.h ++++ b/bifscanner.h +@@ -28,7 +28,7 @@ + #if ! defined(yyFlexLexerOnce) + #undef yyFlexLexer + #define yyFlexLexer bifFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/cmdoptions.yy.cpp b/cmdoptions.yy.cpp +index 6ee80de..1acfcce 100644 +--- a/cmdoptions.yy.cpp ++++ b/cmdoptions.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/cmdoptionsscanner.h b/cmdoptionsscanner.h +index a48af09..e02c1f1 100755 +--- a/cmdoptionsscanner.h ++++ b/cmdoptionsscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +diff --git a/reginit.yy.cpp b/reginit.yy.cpp +index 8422867..ff088f9 100644 +--- a/reginit.yy.cpp ++++ b/reginit.yy.cpp +@@ -379,7 +379,7 @@ typedef unsigned char YY_CHAR; + + #define yytext_ptr yytext + +-#include ++#include "FlexLexer.h" + + int yyFlexLexer::yywrap() { return 1; } + int yyFlexLexer::yylex() +diff --git a/reginitscanner.h b/reginitscanner.h +index 4e78af9..23177be 100755 +--- a/reginitscanner.h ++++ b/reginitscanner.h +@@ -29,7 +29,7 @@ + + #undef yyFlexLexer + #define yyFlexLexer reginitFlexLexer +-#include ++#include "FlexLexer.h" + #endif + + // Override the interface for yylex since we namespaced it +-- +2.30.2 + From james.hilliard1 at gmail.com Tue Oct 25 13:58:13 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 07:58:13 -0600 Subject: [Buildroot] [PATCH 1/1] package/python3: bump to version 3.11.0 Message-ID: <20221025135813.2387865-1-james.hilliard1@gmail.com> Add new host-pkgconf host python3 dependency. Set new --with-build-python conf options for target python build. Drop Fix cross compiling the uuid module patch which is no longer required as pkgconfig is now used for include directory detection. Refresh patches. License hash changed due to year update: https://github.com/python/cpython/commit/ba00f0d93a4aea85ae8089f139856a7c450584d7 Signed-off-by: James Hilliard --- ...e-the-build-of-pyc-files-conditional.patch | 14 +++--- ...taddrinfo-configure-test-when-cross-.patch | 20 ++++---- ...re-to-disable-the-build-of-certain-e.patch | 32 ++++++------ ...y-header-paths-for-cross-compilation.patch | 12 ++--- ...ook-in-usr-lib-termcap-for-libraries.patch | 10 ++-- .../0006-Don-t-add-multiarch-paths.patch | 8 +-- .../0007-Abort-on-failed-module-build.patch | 8 +-- .../0008-Serial-ioctl-workaround.patch | 6 +-- ...e-shebang-of-Python-scripts-for-cros.patch | 6 +-- ...ig.sh.in-ensure-sed-invocations-only.patch | 4 +- .../0011-Add-an-option-to-disable-pydoc.patch | 32 ++++++------ ...012-Add-an-option-to-disable-lib2to3.patch | 43 ++++++++-------- ...option-to-disable-the-sqlite3-module.patch | 37 ++++++-------- ...d-an-option-to-disable-the-tk-module.patch | 24 ++++----- ...-option-to-disable-the-curses-module.patch | 18 +++---- .../0016-Add-an-option-to-disable-expat.patch | 49 +++++++------------ ...-Add-an-option-to-disable-CJK-codecs.patch | 8 +-- .../0018-Add-an-option-to-disable-NIS.patch | 8 +-- ...Add-an-option-to-disable-unicodedata.patch | 8 +-- .../0020-Add-an-option-to-disable-IDLE.patch | 26 +++++----- ...021-Add-an-option-to-disable-decimal.patch | 36 +++++--------- ...on-to-disable-the-ossaudiodev-module.patch | 14 +++--- ...an-option-to-disable-openssl-support.patch | 8 +-- ...ption-to-disable-the-readline-module.patch | 8 +-- ...to-disable-zlib-bzip2-and-xz-modules.patch | 8 +-- ...thon-config.sh-don-t-reassign-prefix.patch | 6 +-- ...dd-an-option-to-disable-uuid-module.patch} | 8 +-- ...-Fix-cross-compiling-the-uuid-module.patch | 43 ---------------- ...-fix-building-on-older-distributions.patch | 47 ++++++++++++++++++ ...p-CC-print-multiarch-output-for-mus.patch} | 8 +-- ...-fix-building-on-older-distributions.patch | 38 -------------- ...on-to-disable-the-berkeleydb-module.patch} | 8 +-- ...ng-doesn-t-set-errno-when-encryptio.patch} | 8 +-- package/python3/python3.hash | 4 +- package/python3/python3.mk | 12 +++-- 35 files changed, 285 insertions(+), 344 deletions(-) rename package/python3/{0028-Add-an-option-to-disable-uuid-module.patch => 0027-Add-an-option-to-disable-uuid-module.patch} (81%) delete mode 100644 package/python3/0027-Fix-cross-compiling-the-uuid-module.patch create mode 100644 package/python3/0028-fix-building-on-older-distributions.patch rename package/python3/{0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch => 0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch} (91%) delete mode 100644 package/python3/0029-fix-building-on-older-distributions.patch rename package/python3/{0031-Add-an-option-to-disable-the-berkeleydb-module.patch => 0030-Add-an-option-to-disable-the-berkeleydb-module.patch} (80%) rename package/python3/{0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch => 0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch} (89%) diff --git a/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch b/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch index d3b5368903..92aa7274ba 100644 --- a/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch +++ b/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch @@ -1,4 +1,4 @@ -From 322724e166d7ec0393aec577c12fdf6ef2b61e1d Mon Sep 17 00:00:00 2001 +From 51ed7f93cc0333efa8fccd9b88db713c48993df9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 16:21:31 -0800 Subject: [PATCH] Make the build of pyc files conditional @@ -15,10 +15,10 @@ Signed-off-by: Andrey Smirnov 2 files changed, 8 insertions(+) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 77f91e72b1..0c809f3d8a 100644 +index 8fbcd7ac17..2957c8e5a1 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1600,6 +1600,7 @@ libinstall: build_all $(srcdir)/Modules/xxmodule.c +@@ -2078,6 +2078,7 @@ libinstall: all $(srcdir)/Modules/xxmodule.c $(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \ $(DESTDIR)$(LIBDEST)/distutils/tests ; \ fi @@ -26,7 +26,7 @@ index 77f91e72b1..0c809f3d8a 100644 -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ -j0 -d $(LIBDEST) -f \ -@@ -1627,6 +1628,7 @@ libinstall: build_all $(srcdir)/Modules/xxmodule.c +@@ -2105,6 +2106,7 @@ libinstall: all $(srcdir)/Modules/xxmodule.c $(PYTHON_FOR_BUILD) -Wi -OO $(DESTDIR)$(LIBDEST)/compileall.py \ -j0 -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages @@ -35,10 +35,10 @@ index 77f91e72b1..0c809f3d8a 100644 $(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/Grammar.txt -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ diff --git a/configure.ac b/configure.ac -index d60f05251a..1ee5a09588 100644 +index ab5e1de6fa..0cf89ed641 100644 --- a/configure.ac +++ b/configure.ac -@@ -1110,6 +1110,12 @@ fi +@@ -1441,6 +1441,12 @@ fi AC_MSG_CHECKING(LDLIBRARY) @@ -52,5 +52,5 @@ index d60f05251a..1ee5a09588 100644 # library that we build, but we do not want to link against it (we # will find it with a -framework option). For this reason there is an -- -2.25.1 +2.34.1 diff --git a/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch b/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch index 411b8dae4e..5389cb5d15 100644 --- a/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch +++ b/package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch @@ -1,4 +1,4 @@ -From 72e20220f3a592b3ab9f440fbe74efa9f9e82d49 Mon Sep 17 00:00:00 2001 +From b180ab302e2a82be239af334382436628b81381e Mon Sep 17 00:00:00 2001 From: Vanya Sergeev Date: Wed, 23 Dec 2015 11:30:33 +0100 Subject: [PATCH] Disable buggy_getaddrinfo configure test when cross-compiling @@ -10,18 +10,18 @@ Signed-off-by: Vanya Sergeev 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac -index 1ee5a09588..c2445edc88 100644 +index 0cf89ed641..830885fcb3 100644 --- a/configure.ac +++ b/configure.ac -@@ -4230,7 +4230,7 @@ fi +@@ -5086,7 +5086,7 @@ fi])) + dnl if ac_cv_func_getaddrinfo + ]) - AC_MSG_RESULT($ac_cv_buggy_getaddrinfo) - --if test $have_getaddrinfo = no || test "$ac_cv_buggy_getaddrinfo" = yes -+if test $have_getaddrinfo = no || test "$cross_compiling" != "yes" -a "$ac_cv_buggy_getaddrinfo" = yes +-if test "$ac_cv_func_getaddrinfo" = no -o "$ac_cv_buggy_getaddrinfo" = yes ++if test "$ac_cv_func_getaddrinfo" = no || test "$cross_compiling" != "yes" -a "$ac_cv_buggy_getaddrinfo" = yes then - if test $ipv6 = yes - then + AS_VAR_IF([ipv6], [yes], [ + AC_MSG_ERROR([m4_normalize([ -- -2.25.1 +2.34.1 diff --git a/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch b/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch index 7ac0f39d06..5b3911374e 100644 --- a/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch +++ b/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch @@ -1,4 +1,4 @@ -From df7c95b4ceecf390b961d843a556c470ac9080b2 Mon Sep 17 00:00:00 2001 +From 8e02cebdac536dfb6748da2c50656a26f70d9da7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 16:33:22 -0800 Subject: [PATCH] Add infrastructure to disable the build of certain extensions @@ -44,10 +44,10 @@ Signed-off-by: Andrey Smirnov 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 0c809f3d8a..7c3dde8dd4 100644 +index 2957c8e5a1..c1cfb96767 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -218,6 +218,8 @@ FILEMODE= 644 +@@ -239,6 +239,8 @@ FILEMODE= 644 # configure script arguments CONFIG_ARGS= @CONFIG_ARGS@ @@ -56,18 +56,18 @@ index 0c809f3d8a..7c3dde8dd4 100644 # Subdirectories with code SRCDIRS= @SRCDIRS@ -@@ -628,6 +630,7 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o +@@ -739,6 +741,7 @@ sharedmods: $(PYTHON_FOR_BUILD_DEPS) pybuilddir.txt @LIBMPDEC_INTERNAL@ @LIBEXPA + *) quiet="";; \ esac; \ echo "$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ - _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ + DISABLED_EXTENSIONS="$(DISABLED_EXTENSIONS)" \ $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build"; \ $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ - _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ -@@ -1748,7 +1751,8 @@ libainstall: @DEF_MAKE_RULE@ python-config + $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build +@@ -2228,7 +2231,8 @@ libainstall: all python-config # Install the dynamically loadable modules # This goes into $(exec_prefix) - sharedinstall: sharedmods + sharedinstall: all - $(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \ + $(RUNSHARED) DISABLED_EXTENSIONS="$(DISABLED_EXTENSIONS)" \ + $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \ @@ -75,12 +75,12 @@ index 0c809f3d8a..7c3dde8dd4 100644 --install-scripts=$(BINDIR) \ --install-platlib=$(DESTSHARED) \ diff --git a/configure.ac b/configure.ac -index c2445edc88..73d66167de 100644 +index 830885fcb3..5a6a1fe608 100644 --- a/configure.ac +++ b/configure.ac -@@ -3091,6 +3091,8 @@ LIBS="$withval $LIBS" - - PKG_PROG_PKG_CONFIG +@@ -3562,6 +3562,8 @@ LIBS="$withval $LIBS" + ], + [AC_MSG_RESULT(no)]) +AC_SUBST(DISABLED_EXTENSIONS) + @@ -88,11 +88,11 @@ index c2445edc88..73d66167de 100644 AC_MSG_CHECKING(for --with-system-expat) AC_ARG_WITH(system_expat, diff --git a/setup.py b/setup.py -index 770866bca7..b6c829b3a5 100644 +index 15d0d4576a..e496ee34c2 100644 --- a/setup.py +++ b/setup.py -@@ -58,7 +58,10 @@ with warnings.catch_warnings(): - TEST_EXTENSIONS = (sysconfig.get_config_var('TEST_MODULES') == 'yes') +@@ -56,7 +56,10 @@ + # This global variable is used to hold the list of modules to be disabled. -DISABLED_MODULE_LIST = [] @@ -104,5 +104,5 @@ index 770866bca7..b6c829b3a5 100644 # --list-module-names option used by Tools/scripts/generate_module_names.py LIST_MODULE_NAMES = False -- -2.25.1 +2.34.1 diff --git a/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch b/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch index 0311348405..9a55d2582d 100644 --- a/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch +++ b/package/python3/0004-Adjust-library-header-paths-for-cross-compilation.patch @@ -1,4 +1,4 @@ -From 61af65485f1dade4aa08d0cf2b24082aeda24c51 Mon Sep 17 00:00:00 2001 +From 132b9dca3bb4d4682f7e318648ce11e1abb31b62 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:33:14 +0100 Subject: [PATCH] Adjust library/header paths for cross-compilation @@ -23,10 +23,10 @@ Refresh for 3.10.0 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/Lib/distutils/command/build_ext.py b/Lib/distutils/command/build_ext.py -index 1a9bd12..3cf7d67 100644 +index f287b34998..298234d6a1 100644 --- a/Lib/distutils/command/build_ext.py +++ b/Lib/distutils/command/build_ext.py -@@ -234,7 +234,10 @@ class build_ext(Command): +@@ -234,7 +234,10 @@ def finalize_options(self): if (sysconfig.get_config_var('Py_ENABLE_SHARED')): if not sysconfig.python_build: # building third party extensions @@ -39,10 +39,10 @@ index 1a9bd12..3cf7d67 100644 # building python standard extensions self.library_dirs.append('.') diff --git a/Lib/sysconfig.py b/Lib/sysconfig.py -index 95b48f6..9fb1956 100644 +index ebe3711827..6328ec41af 100644 --- a/Lib/sysconfig.py +++ b/Lib/sysconfig.py -@@ -123,10 +123,17 @@ _SCHEME_KEYS = ('stdlib', 'platstdlib', 'purelib', 'platlib', 'include', +@@ -168,10 +168,17 @@ def joinuser(*args): _PY_VERSION = sys.version.split()[0] _PY_VERSION_SHORT = f'{sys.version_info[0]}.{sys.version_info[1]}' _PY_VERSION_SHORT_NO_DOT = f'{sys.version_info[0]}{sys.version_info[1]}' @@ -65,5 +65,5 @@ index 95b48f6..9fb1956 100644 _USER_BASE = None -- -2.30.2 +2.34.1 diff --git a/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch b/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch index 3e224995a5..78b3ae596d 100644 --- a/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch +++ b/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch @@ -1,4 +1,4 @@ -From 60d71e37d167ea89445250be436170a6cfee84e7 Mon Sep 17 00:00:00 2001 +From 5d13e384b30a2c0b1c7b65718590b7fb0c3ba55e Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:36:00 +0100 Subject: [PATCH] Don't look in /usr/lib/termcap for libraries @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/setup.py b/setup.py -index 66d372a..e632b6f 100644 +index e496ee34c2..1904898165 100644 --- a/setup.py +++ b/setup.py -@@ -1147,12 +1147,9 @@ class PyBuildExt(build_ext): +@@ -1107,12 +1107,9 @@ def detect_readline_curses(self): pass # Issue 7384: Already linked against curses or tinfo. elif curses_library: readline_libs.append(curses_library) @@ -23,9 +23,9 @@ index 66d372a..e632b6f 100644 readline_libs.append('termcap') self.add(Extension('readline', ['readline.c'], - library_dirs=['/usr/lib/termcap'], - extra_link_args=readline_extra_link_args, libraries=readline_libs)) else: + self.missing.append('readline') -- -2.25.1 +2.34.1 diff --git a/package/python3/0006-Don-t-add-multiarch-paths.patch b/package/python3/0006-Don-t-add-multiarch-paths.patch index 48d8cc790e..749e295df1 100644 --- a/package/python3/0006-Don-t-add-multiarch-paths.patch +++ b/package/python3/0006-Don-t-add-multiarch-paths.patch @@ -1,4 +1,4 @@ -From f5933b8f973cd11698b52d535a10d0474e49f5a5 Mon Sep 17 00:00:00 2001 +From ad463b5d58ae79f69b011fb048861bd874d34369 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:36:27 +0100 Subject: [PATCH] Don't add multiarch paths @@ -17,10 +17,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/setup.py b/setup.py -index ec3ba60607..e27620035c 100644 +index 1904898165..32294546b6 100644 --- a/setup.py +++ b/setup.py -@@ -830,10 +830,10 @@ class PyBuildExt(build_ext): +@@ -852,10 +852,10 @@ def configure_compiler(self): if not CROSS_COMPILING: add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib') add_dir_to_list(self.compiler.include_dirs, '/usr/local/include') @@ -33,5 +33,5 @@ index ec3ba60607..e27620035c 100644 def init_inc_lib_dirs(self): -- -2.25.1 +2.34.1 diff --git a/package/python3/0007-Abort-on-failed-module-build.patch b/package/python3/0007-Abort-on-failed-module-build.patch index 32e2261a05..a473896127 100644 --- a/package/python3/0007-Abort-on-failed-module-build.patch +++ b/package/python3/0007-Abort-on-failed-module-build.patch @@ -1,4 +1,4 @@ -From 188c0ebfdb71f5252fa7701013b8d1209f28aef7 Mon Sep 17 00:00:00 2001 +From 60b1664a7acebadb1a3d6df871145147f33b5afe Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:43:24 +0100 Subject: [PATCH] Abort on failed module build @@ -14,10 +14,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 1 insertion(+) diff --git a/setup.py b/setup.py -index e27620035c..d3f0e663f2 100644 +index 32294546b6..0e04944ce0 100644 --- a/setup.py +++ b/setup.py -@@ -561,6 +561,7 @@ class PyBuildExt(build_ext): +@@ -579,6 +579,7 @@ def print_three_column(lst): print("Failed to build these modules:") print_three_column(failed) print() @@ -26,5 +26,5 @@ index e27620035c..d3f0e663f2 100644 if self.failed_on_import: failed = self.failed_on_import[:] -- -2.25.1 +2.34.1 diff --git a/package/python3/0008-Serial-ioctl-workaround.patch b/package/python3/0008-Serial-ioctl-workaround.patch index df31cd6220..7722a04f38 100644 --- a/package/python3/0008-Serial-ioctl-workaround.patch +++ b/package/python3/0008-Serial-ioctl-workaround.patch @@ -1,4 +1,4 @@ -From 9e6211b0d6d4610e5fb7d2c7e1152eb7c64d968b Mon Sep 17 00:00:00 2001 +From 90f3075b629d90d942da1d22ef7563f7149f4f6c Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 23 Dec 2015 11:44:02 +0100 Subject: [PATCH] Serial ioctl() workaround @@ -15,7 +15,7 @@ Signed-off-by: Baruch Siach 1 file changed, 2 insertions(+) diff --git a/Modules/termios.c b/Modules/termios.c -index 75e5e52320..eefbddfe69 100644 +index 354e5ca18d..c08957c500 100644 --- a/Modules/termios.c +++ b/Modules/termios.c @@ -15,7 +15,9 @@ @@ -29,5 +29,5 @@ index 75e5e52320..eefbddfe69 100644 /* HP-UX requires that this be included to pick up MDCD, MCTS, MDSR, * MDTR, MRI, and MRTS (apparently used internally by some things -- -2.25.1 +2.34.1 diff --git a/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch b/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch index 8a77fe3708..eff8fc7694 100644 --- a/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch +++ b/package/python3/0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros.patch @@ -1,4 +1,4 @@ -From cb595a591c71e0bf7c63a3706b0be45ac6a642e3 Mon Sep 17 00:00:00 2001 +From 2439bd2ed5dbdd7e5fda15adefd0f6f1b047ec1b Mon Sep 17 00:00:00 2001 From: Christophe Vu-Brugier Date: Wed, 23 Dec 2015 11:44:30 +0100 Subject: [PATCH] Do not adjust the shebang of Python scripts for @@ -21,7 +21,7 @@ diff --git a/Lib/distutils/command/build_scripts.py b/Lib/distutils/command/buil index ccc70e6465..d6d54195c1 100644 --- a/Lib/distutils/command/build_scripts.py +++ b/Lib/distutils/command/build_scripts.py -@@ -91,7 +91,7 @@ class build_scripts(Command): +@@ -91,7 +91,7 @@ def copy_scripts(self): adjust = True post_interp = match.group(1) or b'' @@ -31,5 +31,5 @@ index ccc70e6465..d6d54195c1 100644 self.build_dir) updated_files.append(outfile) -- -2.25.1 +2.34.1 diff --git a/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch b/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch index a1f9ab6cd9..f26ee85b61 100644 --- a/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch +++ b/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch @@ -1,4 +1,4 @@ -From eb51497e4b5799f8ab0277426d3e54414acb9d4b Mon Sep 17 00:00:00 2001 +From 55ef5552e4ee60266e3299f253bec3b13785e585 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 20 Nov 2014 13:24:59 +0100 Subject: [PATCH] Misc/python-config.sh.in: ensure sed invocations only match @@ -63,5 +63,5 @@ index 2602fe24c0..a1bc3cd5f7 100644 PYTHONFRAMEWORK="@PYTHONFRAMEWORK@" INCDIR="-I$includedir/python${VERSION}${ABIFLAGS}" -- -2.25.1 +2.34.1 diff --git a/package/python3/0011-Add-an-option-to-disable-pydoc.patch b/package/python3/0011-Add-an-option-to-disable-pydoc.patch index a843c8c126..f7bfd437bb 100644 --- a/package/python3/0011-Add-an-option-to-disable-pydoc.patch +++ b/package/python3/0011-Add-an-option-to-disable-pydoc.patch @@ -1,4 +1,4 @@ -From a65e5d3caf8e076d531191164c23c6240461f675 Mon Sep 17 00:00:00 2001 +From 38b7f7949258aeadf8bc45525be91340bb732a2a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:07:56 -0800 Subject: [PATCH] Add an option to disable pydoc @@ -19,10 +19,10 @@ Signed-off-by: Adam Duskett 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index c0d5511..32b3df7 100644 +index c1cfb96767..403380e181 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1391,7 +1391,9 @@ bininstall: altbininstall +@@ -1864,7 +1864,9 @@ bininstall: altbininstall -rm -f $(DESTDIR)$(BINDIR)/idle3 (cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3) -rm -f $(DESTDIR)$(BINDIR)/pydoc3 @@ -32,15 +32,15 @@ index c0d5511..32b3df7 100644 -rm -f $(DESTDIR)$(BINDIR)/2to3 (cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3) if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ -@@ -1442,7 +1444,6 @@ LIBSUBDIRS= asyncio \ +@@ -1915,7 +1917,6 @@ LIBSUBDIRS= asyncio \ lib2to3 lib2to3/fixes lib2to3/pgen2 \ logging \ multiprocessing multiprocessing/dummy \ - pydoc_data \ + re \ site-packages \ sqlite3 \ - tkinter \ -@@ -1530,6 +1531,10 @@ TESTSUBDIRS= ctypes/test \ +@@ -2008,6 +2009,10 @@ TESTSUBDIRS= ctypes/test \ tkinter/test/test_ttk \ unittest/test unittest/test/testmock @@ -49,15 +49,15 @@ index c0d5511..32b3df7 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 083a12d..9079531 100644 +index 5a6a1fe608..f68ea72321 100644 --- a/configure.ac +++ b/configure.ac -@@ -3373,6 +3373,12 @@ if test "$posix_threads" = "yes"; then - AC_CHECK_FUNCS(pthread_getcpuclockid) - fi +@@ -4171,6 +4171,12 @@ AS_VAR_IF([posix_threads], [stub], [ + AC_DEFINE([HAVE_PTHREAD_STUBS], [1], [Define if platform requires stubbed pthreads support]) + ]) +AC_SUBST(PYDOC) + @@ -65,14 +65,14 @@ index 083a12d..9079531 100644 + AS_HELP_STRING([--disable-pydoc], [disable pydoc]), + [ PYDOC="${enableval}" ], [ PYDOC=yes ]) + - # Check for enable-ipv6 AH_TEMPLATE(ENABLE_IPV6, [Define if --enable-ipv6 is specified]) + AC_MSG_CHECKING([if --enable-ipv6 is specified]) diff --git a/setup.py b/setup.py -index d00d389..d23f148 100644 +index 0e04944ce0..3e55f5b2e0 100644 --- a/setup.py +++ b/setup.py -@@ -2721,6 +2721,12 @@ def main(): +@@ -1593,6 +1593,12 @@ class DummyProcess: # turn off warnings when deprecated modules are imported import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -85,7 +85,7 @@ index d00d389..d23f148 100644 setup(# PyPI Metadata (PEP 301) name = "Python", version = sys.version.split()[0], -@@ -2746,8 +2752,7 @@ def main(): +@@ -1617,8 +1623,7 @@ class DummyProcess: # If you change the scripts installed here, you also need to # check the PyBuildScripts command above, and change the links # created by the bininstall target in Makefile.pre.in @@ -96,5 +96,5 @@ index d00d389..d23f148 100644 # --install-platlib -- -2.30.2 +2.34.1 diff --git a/package/python3/0012-Add-an-option-to-disable-lib2to3.patch b/package/python3/0012-Add-an-option-to-disable-lib2to3.patch index c8f2e528bf..0085d5a63f 100644 --- a/package/python3/0012-Add-an-option-to-disable-lib2to3.patch +++ b/package/python3/0012-Add-an-option-to-disable-lib2to3.patch @@ -1,4 +1,4 @@ -From f034b1b0f33a7bd4dde23f0bc1fa8e00e3518c9d Mon Sep 17 00:00:00 2001 +From 0e4f0a525ea0a68f6d4c5349c301da2e9b0c8ac9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:15:31 -0800 Subject: [PATCH] Add an option to disable lib2to3 @@ -14,15 +14,15 @@ Signed-off-by: Andrey Smirnov Signed-off-by: Adam Duskett --- Makefile.pre.in | 17 ++++++++++++----- - configure.ac | 5 +++++ + configure.ac | 6 ++++++ setup.py | 6 +++--- - 3 files changed, 20 insertions(+), 8 deletions(-) + 3 files changed, 21 insertions(+), 8 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 28cf88e..63fa9fb 100644 +index 403380e181..f5d0573067 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1395,7 +1395,9 @@ ifeq (@PYDOC@,yes) +@@ -1868,7 +1868,9 @@ ifeq (@PYDOC@,yes) (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) endif -rm -f $(DESTDIR)$(BINDIR)/2to3 @@ -32,15 +32,15 @@ index 28cf88e..63fa9fb 100644 if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ rm -f $(DESTDIR)$(BINDIR)/python3-32$(EXE); \ (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-32$(EXE) python3-32$(EXE)) \ -@@ -1441,7 +1443,6 @@ LIBSUBDIRS= asyncio \ +@@ -1914,7 +1916,6 @@ LIBSUBDIRS= asyncio \ idlelib idlelib/Icons \ - importlib importlib/metadata \ + importlib importlib/resources importlib/metadata \ json \ - lib2to3 lib2to3/fixes lib2to3/pgen2 \ logging \ multiprocessing multiprocessing/dummy \ - site-packages \ -@@ -1458,10 +1459,6 @@ LIBSUBDIRS= asyncio \ + re \ +@@ -1934,10 +1935,6 @@ LIBSUBDIRS= asyncio \ TESTSUBDIRS= ctypes/test \ distutils/tests \ idlelib/idle_test \ @@ -48,10 +48,10 @@ index 28cf88e..63fa9fb 100644 - lib2to3/tests/data \ - lib2to3/tests/data/fixers \ - lib2to3/tests/data/fixers/myfixes \ - sqlite3/test \ test test/audiodata \ test/capath test/cjkencodings \ -@@ -1535,6 +1532,14 @@ ifeq (@PYDOC@,yes) + test/data test/decimaltestdata \ +@@ -2013,6 +2010,14 @@ ifeq (@PYDOC@,yes) LIBSUBDIRS += pydoc_data endif @@ -64,9 +64,9 @@ index 28cf88e..63fa9fb 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ -@@ -1637,10 +1642,12 @@ ifeq (@PYC_BUILD@,yes) +@@ -2115,10 +2120,12 @@ ifeq (@PYC_BUILD@,yes) -j0 -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages endif @@ -80,26 +80,27 @@ index 28cf88e..63fa9fb 100644 # bpo-21536: Misc/python-config.sh is generated in the build directory # from $(srcdir)Misc/python-config.sh.in. diff --git a/configure.ac b/configure.ac -index 9079531..34c2ba9 100644 +index f68ea72321..d8e10cf2b2 100644 --- a/configure.ac +++ b/configure.ac -@@ -6014,6 +6014,11 @@ else - fi - AC_SUBST(TEST_MODULES) +@@ -7078,6 +7078,12 @@ PY_STDLIB_MOD([xxlimited_35], [test "$with_trace_refs" = "no"], [test "$ac_cv_fu + # substitute multiline block, must come after last PY_STDLIB_MOD() + AC_SUBST([MODULE_BLOCK]) +AC_SUBST(LIB2TO3) + +AC_ARG_ENABLE(lib2to3, + AS_HELP_STRING([--disable-lib2to3], [disable lib2to3]), + [ LIB2TO3="${enableval}" ], [ LIB2TO3=yes ]) - ++ # generate output files AC_CONFIG_FILES(Makefile.pre Misc/python.pc Misc/python-embed.pc Misc/python-config.sh) + AC_CONFIG_FILES([Modules/Setup.bootstrap Modules/Setup.stdlib]) diff --git a/setup.py b/setup.py -index d23f148..663fd44 100644 +index 3e55f5b2e0..c490b0b08f 100644 --- a/setup.py +++ b/setup.py -@@ -2722,11 +2722,11 @@ def main(): +@@ -1594,11 +1594,11 @@ class DummyProcess: import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -115,5 +116,5 @@ index d23f148..663fd44 100644 name = "Python", version = sys.version.split()[0], -- -2.30.2 +2.34.1 diff --git a/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch b/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch index 81fa52bb73..795ea3b898 100644 --- a/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch +++ b/package/python3/0013-Add-option-to-disable-the-sqlite3-module.patch @@ -1,4 +1,4 @@ -From dd2722dec08eb9c72c36313e93661eeca3ad64d8 Mon Sep 17 00:00:00 2001 +From ef8c030e01b1be8be582e90c31298a5863094858 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:20:45 -0800 Subject: [PATCH] Add option to disable the sqlite3 module @@ -10,49 +10,40 @@ Signed-off-by: Andrey Smirnov [ Adam Duskett: ported to Python 3.10.0 ] Signed-off-by: Adam Duskett --- - Makefile.pre.in | 7 +++++-- + Makefile.pre.in | 5 ++++- configure.ac | 9 +++++++++ - 2 files changed, 14 insertions(+), 2 deletions(-) + 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 5847029..5628860 100644 +index f5d0573067..9f4cdf14cf 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1446,7 +1446,6 @@ LIBSUBDIRS= asyncio \ - logging \ +@@ -1920,7 +1920,6 @@ LIBSUBDIRS= asyncio \ multiprocessing multiprocessing/dummy \ + re \ site-packages \ - sqlite3 \ tkinter \ + tomllib \ turtledemo \ - unittest \ -@@ -1459,7 +1458,6 @@ LIBSUBDIRS= asyncio \ - TESTSUBDIRS= ctypes/test \ - distutils/tests \ - idlelib/idle_test \ -- sqlite3/test \ - test test/audiodata \ - test/capath test/cjkencodings \ - test/data test/decimaltestdata \ -@@ -1540,6 +1538,11 @@ TESTSUBDIRS += lib2to3/tests \ +@@ -2018,6 +2017,10 @@ TESTSUBDIRS += lib2to3/tests \ lib2to3/tests/data/fixers/myfixes endif +ifeq (@SQLITE3@,yes) +LIBSUBDIRS += sqlite3 -+TESTSUBDIRS += sqlite3/test +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 34c2ba9..dfee472 100644 +index d8e10cf2b2..4cc0951ab9 100644 --- a/configure.ac +++ b/configure.ac -@@ -3373,6 +3373,15 @@ if test "$posix_threads" = "yes"; then - AC_CHECK_FUNCS(pthread_getcpuclockid) - fi +@@ -4171,6 +4171,15 @@ AS_VAR_IF([posix_threads], [stub], [ + AC_DEFINE([HAVE_PTHREAD_STUBS], [1], [Define if platform requires stubbed pthreads support]) + ]) +AC_SUBST(SQLITE3) +AC_ARG_ENABLE(sqlite3, @@ -67,5 +58,5 @@ index 34c2ba9..dfee472 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch b/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch index db79f5691f..04f7e34435 100644 --- a/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch +++ b/package/python3/0014-Add-an-option-to-disable-the-tk-module.patch @@ -1,4 +1,4 @@ -From ad6b66b34f71ff6b60b3be5f6fd3e781cdeecd59 Mon Sep 17 00:00:00 2001 +From bbbfe699d648a5cb191203b16e1786e8cf4ea908 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:23:42 -0800 Subject: [PATCH] Add an option to disable the tk module @@ -15,18 +15,18 @@ Signed-off-by: Adam Duskett 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 5628860..c968113 100644 +index 9f4cdf14cf..4f83911200 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1446,7 +1446,6 @@ LIBSUBDIRS= asyncio \ - logging \ +@@ -1920,7 +1920,6 @@ LIBSUBDIRS= asyncio \ multiprocessing multiprocessing/dummy \ + re \ site-packages \ - tkinter \ + tomllib \ turtledemo \ unittest \ - urllib \ -@@ -1522,8 +1521,6 @@ TESTSUBDIRS= ctypes/test \ +@@ -2001,8 +2000,6 @@ TESTSUBDIRS= ctypes/test \ test/tracedmodules \ test/xmltestdata test/xmltestdata/c14n-20 \ test/ziptestdata \ @@ -35,8 +35,8 @@ index 5628860..c968113 100644 unittest/test unittest/test/testmock ifeq (@PYDOC@,yes) -@@ -1543,6 +1540,13 @@ LIBSUBDIRS += sqlite3 - TESTSUBDIRS += sqlite3/test +@@ -2021,6 +2018,13 @@ ifeq (@SQLITE3@,yes) + LIBSUBDIRS += sqlite3 endif +ifeq (@TK@,yes) @@ -47,13 +47,13 @@ index 5628860..c968113 100644 + + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index dfee472..dc76dff 100644 +index 4cc0951ab9..f4ce506801 100644 --- a/configure.ac +++ b/configure.ac -@@ -3382,6 +3382,15 @@ if test "$SQLITE3" = "no" ; then +@@ -4180,6 +4180,15 @@ if test "$SQLITE3" = "no" ; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _sqlite3" fi @@ -70,5 +70,5 @@ index dfee472..dc76dff 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch b/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch index 35d92fb7d1..da6f891104 100644 --- a/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch +++ b/package/python3/0015-Add-an-option-to-disable-the-curses-module.patch @@ -1,4 +1,4 @@ -From 962deb43f5f340a8472d432ae8e6d61186f9040e Mon Sep 17 00:00:00 2001 +From 03e28cdd46dac1b7e4e9c8bbd2ea44b09e514205 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:31:51 -0800 Subject: [PATCH] Add an option to disable the curses module @@ -10,15 +10,15 @@ Signed-off-by: Andrey Smirnov [ Adam Duskett: ported to Python 3.10.0 ] Signed-off-by: Adam Duskett --- - Makefile.pre.in | 4 +++- + Makefile.pre.in | 4 +++- configure.ac | 9 +++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index c968113..f89f155 100644 +index 4f83911200..8e879b35c6 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1432,7 +1432,6 @@ LIBSUBDIRS= asyncio \ +@@ -1905,7 +1905,6 @@ LIBSUBDIRS= asyncio \ concurrent concurrent/futures \ csv \ ctypes ctypes/macholib \ @@ -26,7 +26,7 @@ index c968113..f89f155 100644 dbm \ distutils distutils/command \ email email/mime \ -@@ -1546,6 +1545,9 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \ +@@ -2024,6 +2023,9 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \ tkinter/test/test_ttk endif @@ -35,12 +35,12 @@ index c968113..f89f155 100644 +endif TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c diff --git a/configure.ac b/configure.ac -index dc76dff..4f1cda5 100644 +index f4ce506801..0ae9863cd6 100644 --- a/configure.ac +++ b/configure.ac -@@ -3391,6 +3391,15 @@ if test "$TK" = "no"; then +@@ -4189,6 +4189,15 @@ if test "$TK" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _tkinter" fi @@ -57,5 +57,5 @@ index dc76dff..4f1cda5 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0016-Add-an-option-to-disable-expat.patch b/package/python3/0016-Add-an-option-to-disable-expat.patch index 83c89e1f68..c30740762a 100644 --- a/package/python3/0016-Add-an-option-to-disable-expat.patch +++ b/package/python3/0016-Add-an-option-to-disable-expat.patch @@ -1,4 +1,4 @@ -From 7e0e7dc25f50acd6922493ae620ee5cbf107a79a Mon Sep 17 00:00:00 2001 +From c9a2ea3edacf57746517600ccc11c254a9fd6c48 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 22 Feb 2017 17:40:45 -0800 Subject: [PATCH] Add an option to disable expat @@ -17,23 +17,22 @@ Signed-off-by: Andrey Smirnov Signed-off-by: Adam Duskett --- Makefile.pre.in | 5 ++++- - configure.ac | 18 +++++++++++++----- - setup.py | 2 +- - 3 files changed, 18 insertions(+), 7 deletions(-) + configure.ac | 20 ++++++++++++++------ + 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index f89f155..08c5e8a 100644 +index 8e879b35c6..80d617cf7f 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1450,7 +1450,6 @@ LIBSUBDIRS= asyncio \ +@@ -1925,7 +1925,6 @@ LIBSUBDIRS= asyncio \ urllib \ venv venv/scripts venv/scripts/common venv/scripts/posix \ wsgiref \ - $(XMLLIBSUBDIRS) \ xmlrpc \ - zoneinfo - TESTSUBDIRS= ctypes/test \ -@@ -1549,6 +1548,10 @@ ifeq (@CURSES@,yes) + zoneinfo \ + __phello__ +@@ -2027,6 +2026,10 @@ ifeq (@CURSES@,yes) LIBSUBDIRS += curses endif @@ -42,13 +41,13 @@ index f89f155..08c5e8a 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index 4f1cda5..e99a174 100644 +index 0ae9863cd6..201cad0bfc 100644 --- a/configure.ac +++ b/configure.ac -@@ -3094,13 +3094,21 @@ PKG_PROG_PKG_CONFIG +@@ -3565,15 +3565,23 @@ LIBS="$withval $LIBS" AC_SUBST(DISABLED_EXTENSIONS) # Check for use of the system expat library @@ -64,7 +63,8 @@ index 4f1cda5..e99a174 100644 -AC_MSG_RESULT($with_system_expat) +AC_MSG_RESULT($with_expat) -+ + +-AS_VAR_IF([with_system_expat], [yes], [ +if test "$with_expat" != "none"; then + EXPAT=yes +else @@ -72,22 +72,11 @@ index 4f1cda5..e99a174 100644 + EXPAT=no +fi +AC_SUBST(EXPAT) - - # Check for use of the system libffi library - AC_MSG_CHECKING(for --with-system-ffi) -diff --git a/setup.py b/setup.py -index 663fd44..e30ed52 100644 ---- a/setup.py -+++ b/setup.py -@@ -1764,7 +1764,7 @@ class PyBuildExt(build_ext): - # - # More information on Expat can be found at www.libexpat.org. - # -- if '--with-system-expat' in sysconfig.get_config_var("CONFIG_ARGS"): -+ if '--with-expat=system' in sysconfig.get_config_var("CONFIG_ARGS"): - expat_inc = [] - define_macros = [] - extra_compile_args = [] ++ ++AS_VAR_IF([with_expat], [system], [ + LIBEXPAT_CFLAGS=${LIBEXPAT_CFLAGS-""} + LIBEXPAT_LDFLAGS=${LIBEXPAT_LDFLAGS-"-lexpat"} + LIBEXPAT_INTERNAL= -- -2.30.2 +2.34.1 diff --git a/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch b/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch index 2afcf4526d..63a07fb514 100644 --- a/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch +++ b/package/python3/0017-Add-an-option-to-disable-CJK-codecs.patch @@ -1,4 +1,4 @@ -From 2c0d31bb91fc7f94283c3ab632925fbbe24e94d6 Mon Sep 17 00:00:00 2001 +From d8ef6a7a9f2b954cf1c1e37fc3c35055b42af0f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:49:55 +0100 Subject: [PATCH] Add an option to disable CJK codecs @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 9ef0ecd42f..18e6fd70a0 100644 +index 201cad0bfc..ecdd7dbc07 100644 --- a/configure.ac +++ b/configure.ac -@@ -3390,6 +3390,12 @@ if test "$SQLITE3" = "no" ; then +@@ -4188,6 +4188,12 @@ if test "$SQLITE3" = "no" ; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _sqlite3" fi @@ -26,5 +26,5 @@ index 9ef0ecd42f..18e6fd70a0 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0018-Add-an-option-to-disable-NIS.patch b/package/python3/0018-Add-an-option-to-disable-NIS.patch index d8fe3616c0..977955d1cb 100644 --- a/package/python3/0018-Add-an-option-to-disable-NIS.patch +++ b/package/python3/0018-Add-an-option-to-disable-NIS.patch @@ -1,4 +1,4 @@ -From 2041d0c8dba87991edaf088b16e37b5189a3466d Mon Sep 17 00:00:00 2001 +From 09fc9f72ebe60bb65e80732a6bd4f12a84159f6d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:50:11 +0100 Subject: [PATCH] Add an option to disable NIS @@ -12,10 +12,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 18e6fd70a0..46d2a8131e 100644 +index ecdd7dbc07..1bdde7f69d 100644 --- a/configure.ac +++ b/configure.ac -@@ -3396,6 +3396,12 @@ AC_ARG_ENABLE(codecs-cjk, +@@ -4194,6 +4194,12 @@ AC_ARG_ENABLE(codecs-cjk, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _codecs_kr _codecs_jp _codecs_cn _codecs_tw _codecs_hk _codecs_iso2022" fi]) @@ -29,5 +29,5 @@ index 18e6fd70a0..46d2a8131e 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0019-Add-an-option-to-disable-unicodedata.patch b/package/python3/0019-Add-an-option-to-disable-unicodedata.patch index 3519377b5e..74702b67a5 100644 --- a/package/python3/0019-Add-an-option-to-disable-unicodedata.patch +++ b/package/python3/0019-Add-an-option-to-disable-unicodedata.patch @@ -1,4 +1,4 @@ -From dd82a401ff6ba4ba116bf4d520e981a1808ed443 Mon Sep 17 00:00:00 2001 +From 4fe7f375a3d171d294caebdd7b7ce49bbc9ad9f3 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:50:27 +0100 Subject: [PATCH] Add an option to disable unicodedata @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 46d2a8131e..5844e3b73f 100644 +index 1bdde7f69d..ba4b0e0c1c 100644 --- a/configure.ac +++ b/configure.ac -@@ -3402,6 +3402,12 @@ AC_ARG_ENABLE(nis, +@@ -4200,6 +4200,12 @@ AC_ARG_ENABLE(nis, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} nis" fi]) @@ -26,5 +26,5 @@ index 46d2a8131e..5844e3b73f 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.25.1 +2.34.1 diff --git a/package/python3/0020-Add-an-option-to-disable-IDLE.patch b/package/python3/0020-Add-an-option-to-disable-IDLE.patch index f09037f7db..09b5f13cdb 100644 --- a/package/python3/0020-Add-an-option-to-disable-IDLE.patch +++ b/package/python3/0020-Add-an-option-to-disable-IDLE.patch @@ -1,4 +1,4 @@ -From f1b15834045d0641c43014b970721df066fa71f7 Mon Sep 17 00:00:00 2001 +From 2c9dbd6d49744aa8da8ebf8d0187d6b06f93c2b5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 22 Feb 2017 17:45:14 -0800 Subject: [PATCH] Add an option to disable IDLE @@ -18,10 +18,10 @@ Signed-off-by: Adam Duskett 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/Makefile.pre.in b/Makefile.pre.in -index 08c5e8a..461c5e3 100644 +index 80d617cf7f..8d1ba1356c 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -1389,7 +1389,9 @@ bininstall: altbininstall +@@ -1862,7 +1862,9 @@ bininstall: altbininstall -rm -f $(DESTDIR)$(LIBPC)/python3-embed.pc (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION)-embed.pc python3-embed.pc) -rm -f $(DESTDIR)$(BINDIR)/idle3 @@ -31,15 +31,15 @@ index 08c5e8a..461c5e3 100644 -rm -f $(DESTDIR)$(BINDIR)/pydoc3 ifeq (@PYDOC@,yes) (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) -@@ -1439,7 +1441,6 @@ LIBSUBDIRS= asyncio \ +@@ -1912,7 +1914,6 @@ LIBSUBDIRS= asyncio \ ensurepip ensurepip/_bundled \ html \ http \ - idlelib idlelib/Icons \ - importlib importlib/metadata \ + importlib importlib/resources importlib/metadata \ json \ logging \ -@@ -1552,6 +1553,10 @@ ifeq (@EXPAT@,yes) +@@ -2030,6 +2031,10 @@ ifeq (@EXPAT@,yes) LIBSUBDIRS += $(XMLLIBSUBDIRS) endif @@ -48,13 +48,13 @@ index 08c5e8a..461c5e3 100644 +endif + TEST_MODULES=@TEST_MODULES@ - libinstall: build_all $(srcdir)/Modules/xxmodule.c + libinstall: all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ diff --git a/configure.ac b/configure.ac -index e99a174..baaa743 100644 +index ba4b0e0c1c..5e6d72f7db 100644 --- a/configure.ac +++ b/configure.ac -@@ -6073,6 +6073,12 @@ AC_ARG_ENABLE(lib2to3, +@@ -7137,6 +7137,12 @@ AC_ARG_ENABLE(lib2to3, AS_HELP_STRING([--disable-lib2to3], [disable lib2to3]), [ LIB2TO3="${enableval}" ], [ LIB2TO3=yes ]) @@ -66,12 +66,12 @@ index e99a174..baaa743 100644 + # generate output files AC_CONFIG_FILES(Makefile.pre Misc/python.pc Misc/python-embed.pc Misc/python-config.sh) - AC_CONFIG_FILES([Modules/ld_so_aix], [chmod +x Modules/ld_so_aix]) + AC_CONFIG_FILES([Modules/Setup.bootstrap Modules/Setup.stdlib]) diff --git a/setup.py b/setup.py -index e30ed52..4dff249 100644 +index c490b0b08f..4d49a792f7 100644 --- a/setup.py +++ b/setup.py -@@ -2722,11 +2722,14 @@ def main(): +@@ -1594,11 +1594,14 @@ class DummyProcess: import warnings warnings.filterwarnings("ignore",category=DeprecationWarning) @@ -88,5 +88,5 @@ index e30ed52..4dff249 100644 name = "Python", version = sys.version.split()[0], -- -2.30.2 +2.34.1 diff --git a/package/python3/0021-Add-an-option-to-disable-decimal.patch b/package/python3/0021-Add-an-option-to-disable-decimal.patch index fd1887d603..d683565f94 100644 --- a/package/python3/0021-Add-an-option-to-disable-decimal.patch +++ b/package/python3/0021-Add-an-option-to-disable-decimal.patch @@ -1,4 +1,4 @@ -From d5fe81cbd51da2a84ed89d1e4c80d921d4efce26 Mon Sep 17 00:00:00 2001 +From 7091fdf77f612425c178a75148560f9c3514e8b8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:51:31 +0100 Subject: [PATCH] Add an option to disable decimal @@ -14,15 +14,14 @@ Signed-off-by: Adam Duskett [james.hilliard1 at gmail.com: adapt to python 3.9] Signed-off-by: James Hilliard --- - configure.ac | 17 ++++++++++++----- - setup.py | 2 +- - 2 files changed, 13 insertions(+), 6 deletions(-) + configure.ac | 19 +++++++++++++------ + 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/configure.ac b/configure.ac -index 7bd4623ccd..e513ef6a20 100644 +index 5e6d72f7db..e6b1f1e9de 100644 --- a/configure.ac +++ b/configure.ac -@@ -3145,13 +3145,20 @@ fi +@@ -3630,14 +3630,21 @@ fi AC_SUBST(LIBFFI_INCLUDEDIR) # Check for use of the system libmpdec library @@ -34,9 +33,8 @@ index 7bd4623ccd..e513ef6a20 100644 + AS_HELP_STRING([--with-libmpdec], [select which libmpdec version to use: system, builtin, none]), [], - [with_system_libmpdec="no"]) -+ [with_libmpdec="builtin"]) - -AC_MSG_RESULT($with_system_libmpdec) ++ [with_libmpdec="builtin"]) +AC_MSG_RESULT($with_libmpdec) +if test "$with_libmpdec" != "none"; then + MPDEC=yes @@ -46,21 +44,11 @@ index 7bd4623ccd..e513ef6a20 100644 +fi +AC_SUBST(MPDEC) - # Check whether _decimal should use a coroutine-local or thread-local context - AC_MSG_CHECKING(for --with-decimal-contextvar) -diff --git a/setup.py b/setup.py -index c4ee989ba3..3d0c74bb7f 100644 ---- a/setup.py -+++ b/setup.py -@@ -2321,7 +2321,7 @@ class PyBuildExt(build_ext): - # Stefan Krah's _decimal module - extra_compile_args = [] - undef_macros = [] -- if '--with-system-libmpdec' in sysconfig.get_config_var("CONFIG_ARGS"): -+ if '--with-libmpdec=system' in sysconfig.get_config_var("CONFIG_ARGS"): - include_dirs = [] - libraries = ['mpdec'] - sources = ['_decimal/_decimal.c'] +-AS_VAR_IF([with_system_libmpdec], [yes], [ ++AS_VAR_IF([with_libmpdec], [system], [ + LIBMPDEC_CFLAGS=${LIBMPDEC_CFLAGS-""} + LIBMPDEC_LDFLAGS=${LIBMPDEC_LDFLAGS-"-lmpdec"} + LIBMPDEC_INTERNAL= -- -2.25.1 +2.34.1 diff --git a/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch b/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch index 0459b5a14d..56713a7f8f 100644 --- a/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch +++ b/package/python3/0022-Add-an-option-to-disable-the-ossaudiodev-module.patch @@ -1,4 +1,4 @@ -From 9bedc56d2a4b8856162650a11c1fcb6ec38f160b Mon Sep 17 00:00:00 2001 +From d48d9da534cec7891ae444b4ab94a76ac67f5daa Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 23 Dec 2015 11:51:58 +0100 Subject: [PATCH] Add an option to disable the ossaudiodev module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index e513ef6a20..c07505e89e 100644 +index e6b1f1e9de..db33d567ad 100644 --- a/configure.ac +++ b/configure.ac -@@ -3175,6 +3175,12 @@ fi +@@ -3678,6 +3678,12 @@ fi AC_MSG_RESULT($with_decimal_contextvar) @@ -22,9 +22,9 @@ index e513ef6a20..c07505e89e 100644 + DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} ossaudiodev" + fi]) + - # Check for support for loadable sqlite extensions - AC_MSG_CHECKING(for --enable-loadable-sqlite-extensions) - AC_ARG_ENABLE(loadable-sqlite-extensions, + # Check for libmpdec machine flavor + AC_MSG_CHECKING(for decimal libmpdec machine) + AS_CASE([$ac_sys_system], -- -2.25.1 +2.34.1 diff --git a/package/python3/0023-Add-an-option-to-disable-openssl-support.patch b/package/python3/0023-Add-an-option-to-disable-openssl-support.patch index 4801a27300..d4c9fd43be 100644 --- a/package/python3/0023-Add-an-option-to-disable-openssl-support.patch +++ b/package/python3/0023-Add-an-option-to-disable-openssl-support.patch @@ -1,4 +1,4 @@ -From 90ed5c692b8b5596ca0b3ae1436276c8181251d8 Mon Sep 17 00:00:00 2001 +From 25c900e81a2fc0bbe35e7c94e2e5028cfbf6582a Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Wed, 22 Feb 2017 17:55:59 -0800 Subject: [PATCH] Add an option to disable openssl support. @@ -9,10 +9,10 @@ Signed-off-by: Nicolas Cavallari 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 08c148c..a81a24c 100644 +index db33d567ad..42fe6c8f5a 100644 --- a/configure.ac +++ b/configure.ac -@@ -3421,6 +3421,12 @@ AC_ARG_ENABLE(unicodedata, +@@ -4219,6 +4219,12 @@ AC_ARG_ENABLE(unicodedata, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} unicodedata" fi]) @@ -26,5 +26,5 @@ index 08c148c..a81a24c 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch b/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch index adb04d69ea..9250007dae 100644 --- a/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch +++ b/package/python3/0024-Add-an-option-to-disable-the-readline-module.patch @@ -1,4 +1,4 @@ -From 049e7a51e1ffd0d28d6608c707ab4b54e816d338 Mon Sep 17 00:00:00 2001 +From 9082468ca620db77b670ccf568a96bbabb865f80 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 7 Mar 2017 23:29:05 +0100 Subject: [PATCH] Add an option to disable the readline module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index a81a24c..41a21ff 100644 +index 42fe6c8f5a..19875d7d30 100644 --- a/configure.ac +++ b/configure.ac -@@ -3427,6 +3427,12 @@ AC_ARG_ENABLE(openssl, +@@ -4225,6 +4225,12 @@ AC_ARG_ENABLE(openssl, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} ssl _ssl _hashlib" fi]) @@ -26,5 +26,5 @@ index a81a24c..41a21ff 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch b/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch index d466bc3a76..70a0d6cd15 100644 --- a/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch +++ b/package/python3/0025-Add-options-to-disable-zlib-bzip2-and-xz-modules.patch @@ -1,4 +1,4 @@ -From 146730a04dfe98e3d7971ebf5410801ceae88e11 Mon Sep 17 00:00:00 2001 +From 988a335cb34b5fc25ea345ba04ff5ddffe2e946c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 7 Mar 2017 23:31:11 +0100 Subject: [PATCH] Add options to disable zlib, bzip2 and xz modules @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 18 insertions(+) diff --git a/configure.ac b/configure.ac -index 41a21ff..fa81bc7 100644 +index 19875d7d30..ca6c16491a 100644 --- a/configure.ac +++ b/configure.ac -@@ -3433,6 +3433,24 @@ AC_ARG_ENABLE(readline, +@@ -4231,6 +4231,24 @@ AC_ARG_ENABLE(readline, DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} readline" fi]) @@ -38,5 +38,5 @@ index 41a21ff..fa81bc7 100644 AC_ARG_ENABLE(tk, AS_HELP_STRING([--disable-tk], [disable tk]), -- -2.30.2 +2.34.1 diff --git a/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch b/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch index 814a9d42e5..b6bfb010a0 100644 --- a/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch +++ b/package/python3/0026-python-config.sh-don-t-reassign-prefix.patch @@ -1,4 +1,4 @@ -From 106d9378c61e7fa9cad0a63ba068668d54cd11b8 Mon Sep 17 00:00:00 2001 +From 755fb526a62df2a73560f42184db8aadb6899bb0 Mon Sep 17 00:00:00 2001 From: Matt Weber Date: Fri, 6 Oct 2017 09:54:15 -0500 Subject: [PATCH] python-config.sh: don't reassign ${prefix} @@ -27,7 +27,7 @@ Signed-off-by: Matthew Weber 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Misc/python-config.sh.in b/Misc/python-config.sh.in -index a1bc3cd..164d2d3 100644 +index a1bc3cd5f7..164d2d3603 100644 --- a/Misc/python-config.sh.in +++ b/Misc/python-config.sh.in @@ -31,7 +31,7 @@ prefix_real=$(installed_prefix "$0") @@ -49,5 +49,5 @@ index a1bc3cd..164d2d3 100644 SO="@EXT_SUFFIX@" PYTHONFRAMEWORK="@PYTHONFRAMEWORK@" -- -2.30.2 +2.34.1 diff --git a/package/python3/0028-Add-an-option-to-disable-uuid-module.patch b/package/python3/0027-Add-an-option-to-disable-uuid-module.patch similarity index 81% rename from package/python3/0028-Add-an-option-to-disable-uuid-module.patch rename to package/python3/0027-Add-an-option-to-disable-uuid-module.patch index fc4b64dc64..a9501ec189 100644 --- a/package/python3/0028-Add-an-option-to-disable-uuid-module.patch +++ b/package/python3/0027-Add-an-option-to-disable-uuid-module.patch @@ -1,4 +1,4 @@ -From 3bb693408eda77dda145ec5fecee56ea73031e9f Mon Sep 17 00:00:00 2001 +From 58027d25c3cabcf654cb0b31a61d7cbd53dc68c0 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 18 Aug 2018 10:54:56 +0200 Subject: [PATCH] Add an option to disable uuid module @@ -9,10 +9,10 @@ Signed-off-by: Thomas Petazzoni 1 file changed, 9 insertions(+) diff --git a/configure.ac b/configure.ac -index fa81bc7..4e733f6 100644 +index ca6c16491a..ed03b27fb1 100644 --- a/configure.ac +++ b/configure.ac -@@ -3469,6 +3469,15 @@ if test "$CURSES" = "no"; then +@@ -4267,6 +4267,15 @@ if test "$CURSES" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _curses _curses_panel" fi @@ -29,5 +29,5 @@ index fa81bc7..4e733f6 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch b/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch deleted file mode 100644 index d19aedb6c1..0000000000 --- a/package/python3/0027-Fix-cross-compiling-the-uuid-module.patch +++ /dev/null @@ -1,43 +0,0 @@ -From d7b90b157eddefbd0ed59e35c90b083c0c03b644 Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Fri, 20 Jul 2018 10:17:39 -0400 -Subject: [PATCH] Fix cross compiling the uuid module - -Python 3.7 has a new _uuid module, however, the include directory -search path for uuid.h is hardcoded to /usr/include/uuid, which should -not be used when cross-compiling. - -To fix this, use the same solution as the one used by the NIS -detection: append "uuid" to each of the include directories in -"inc_dirs", instead of hardcoding /usr/include/uuid. - -Signed-off-by: Adam Duskett -[Thomas: drop STAGING_DIR based solution, use a solution similar to -the one used for the NIS detection.] -Signed-off-by: Thomas Petazzoni ---- - setup.py | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 3d0c74bb7f..c7be85f352 100644 ---- a/setup.py -+++ b/setup.py -@@ -1866,10 +1866,10 @@ class PyBuildExt(build_ext): - - def detect_uuid(self): - # Build the _uuid module if possible -- uuid_h = sysconfig.get_config_var("HAVE_UUID_H") -- uuid_uuid_h = sysconfig.get_config_var("HAVE_UUID_UUID_H") -- if uuid_h or uuid_uuid_h: -- if sysconfig.get_config_var("HAVE_LIBUUID"): -+ uuid_h = find_file("uuid.h", self.inc_dirs, -+ [os.path.join(inc_dir, 'uuid') for inc_dir in self.inc_dirs]) -+ if uuid_h is not None: -+ if self.compiler.find_library_file(self.lib_dirs, 'uuid'): - uuid_libs = ["uuid"] - else: - uuid_libs = [] --- -2.25.1 - diff --git a/package/python3/0028-fix-building-on-older-distributions.patch b/package/python3/0028-fix-building-on-older-distributions.patch new file mode 100644 index 0000000000..4541b31c5f --- /dev/null +++ b/package/python3/0028-fix-building-on-older-distributions.patch @@ -0,0 +1,47 @@ +From e52e2c5e3df4bc3d2ff07ecb3b8e2a9099ea1631 Mon Sep 17 00:00:00 2001 +From: Adam Duskett +Date: Thu, 16 Aug 2018 14:52:37 -0700 +Subject: [PATCH] fix building on older distributions + +Python > 3.6.3 calls os.replace in the update_file.py script, during the +regen-importlib phase of the build process. + +According to Doc/whatsnew/3.3.rst line 1631, os.replace acts in the same +way as os.rename, however, it is now cross-platform compatible for Windows. + +Because BuildRoot is guaranteed only to be built in POSIX environment, it is +safe to change os.replace back to os.rename. + +This change fixes building on older systems such as CentOS7, that only come +with python 2. + +Signed-off-by: Adam Duskett +--- + Tools/scripts/update_file.py | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/Tools/scripts/update_file.py b/Tools/scripts/update_file.py +index b4182c1d0c..ab443cb1a6 100644 +--- a/Tools/scripts/update_file.py ++++ b/Tools/scripts/update_file.py +@@ -53,7 +53,7 @@ def update_file_with_tmpfile(filename, tmpfile, *, create=False): + if not create: + raise # re-raise + outcome = 'created' +- os.replace(tmpfile, filename) ++ os.rename(tmpfile, filename) + else: + with targetfile: + old_contents = targetfile.read() +@@ -62,7 +62,7 @@ def update_file_with_tmpfile(filename, tmpfile, *, create=False): + # Now compare! + if old_contents != new_contents: + outcome = 'updated' +- os.replace(tmpfile, filename) ++ os.rename(tmpfile, filename) + else: + outcome = 'same' + os.unlink(tmpfile) +-- +2.34.1 + diff --git a/package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch b/package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch similarity index 91% rename from package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch rename to package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch index eff010fa22..5253076d90 100644 --- a/package/python3/0030-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch +++ b/package/python3/0029-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch @@ -1,4 +1,4 @@ -From d009b0142f77881dd75ff760fec728dbc8581a03 Mon Sep 17 00:00:00 2001 +From 07b950aadd570b9f96a1f128505a959b32f40962 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Fri, 2 Aug 2019 15:53:16 +0200 Subject: [PATCH] configure.ac: fixup $CC --print-multiarch output for @@ -30,10 +30,10 @@ Signed-off-by: Peter Korsgaard 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac -index 913051c276..aba03f3779 100644 +index ed03b27fb1..841fd6732c 100644 --- a/configure.ac +++ b/configure.ac -@@ -876,7 +876,11 @@ AC_MSG_CHECKING([for multiarch]) +@@ -1086,7 +1086,11 @@ AC_MSG_CHECKING([for multiarch]) AS_CASE([$ac_sys_system], [Darwin*], [MULTIARCH=""], [FreeBSD*], [MULTIARCH=""], @@ -47,5 +47,5 @@ index 913051c276..aba03f3779 100644 AC_SUBST([MULTIARCH]) AC_MSG_RESULT([$MULTIARCH]) -- -2.20.1 +2.34.1 diff --git a/package/python3/0029-fix-building-on-older-distributions.patch b/package/python3/0029-fix-building-on-older-distributions.patch deleted file mode 100644 index fb59e593f4..0000000000 --- a/package/python3/0029-fix-building-on-older-distributions.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 94c62f96ca61f1a28124c837d7ec5ed0b9ae8786 Mon Sep 17 00:00:00 2001 -From: Adam Duskett -Date: Thu, 16 Aug 2018 14:52:37 -0700 -Subject: [PATCH] fix building on older distributions - -Python > 3.6.3 calls os.replace in the update_file.py script, during the -regen-importlib phase of the build process. - -According to Doc/whatsnew/3.3.rst line 1631, os.replace acts in the same -way as os.rename, however, it is now cross-platform compatible for Windows. - -Because BuildRoot is guaranteed only to be built in POSIX environment, it is -safe to change os.replace back to os.rename. - -This change fixes building on older systems such as CentOS7, that only come -with python 2. - -Signed-off-by: Adam Duskett ---- - Tools/scripts/update_file.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/Tools/scripts/update_file.py b/Tools/scripts/update_file.py -index 224585c69b..ef458c0c63 100644 ---- a/Tools/scripts/update_file.py -+++ b/Tools/scripts/update_file.py -@@ -16,7 +16,7 @@ def main(old_path, new_path): - with open(new_path, 'rb') as f: - new_contents = f.read() - if old_contents != new_contents: -- os.replace(new_path, old_path) -+ os.rename(new_path, old_path) - else: - os.unlink(new_path) - --- -2.25.1 - diff --git a/package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch b/package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch similarity index 80% rename from package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch rename to package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch index 0c0d51a7eb..5fb436db59 100644 --- a/package/python3/0031-Add-an-option-to-disable-the-berkeleydb-module.patch +++ b/package/python3/0030-Add-an-option-to-disable-the-berkeleydb-module.patch @@ -1,4 +1,4 @@ -From cf4d7fd9f7cb6c1ced32ee323b2b5755640051b7 Mon Sep 17 00:00:00 2001 +From 67e9793d070ac5c8e83abbe95b9208533ffeadd0 Mon Sep 17 00:00:00 2001 From: Bernd Kuhls Date: Sat, 11 Apr 2020 22:01:40 +0200 Subject: [PATCH] Add an option to disable the berkeleydb module @@ -9,10 +9,10 @@ Signed-off-by: Bernd Kuhls 1 file changed, 6 insertions(+) diff --git a/configure.ac b/configure.ac -index 4e733f6..1e52f30 100644 +index 841fd6732c..06c9a81f95 100644 --- a/configure.ac +++ b/configure.ac -@@ -3480,6 +3480,12 @@ if test "$UUID" = "no"; then +@@ -4280,6 +4280,12 @@ if test "$UUID" = "no"; then DISABLED_EXTENSIONS="${DISABLED_EXTENSIONS} _uuid" fi @@ -26,5 +26,5 @@ index 4e733f6..1e52f30 100644 AC_ARG_ENABLE(pydoc, -- -2.30.2 +2.34.1 diff --git a/package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch b/package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch similarity index 89% rename from package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch rename to package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch index 0458283c18..712fd08fb1 100644 --- a/package/python3/0032-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch +++ b/package/python3/0031-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch @@ -1,4 +1,4 @@ -From 3c83eedcc2df3ecf6c4a17953ca24dff60c1378e Mon Sep 17 00:00:00 2001 +From 3edeed879871a10acbe802f4a68cff3d4869dbde Mon Sep 17 00:00:00 2001 From: Romain Naour Date: Thu, 12 Nov 2020 00:16:18 +0100 Subject: [PATCH] lib/crypt: uClibc-ng doesn't set errno when encryption method @@ -23,10 +23,10 @@ Signed-off-by: Daniel Lang 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Lib/crypt.py b/Lib/crypt.py -index 33dbc46bb3..4692a5270c 100644 +index de4a14a388..ba482487a7 100644 --- a/Lib/crypt.py +++ b/Lib/crypt.py -@@ -94,7 +94,9 @@ def _add_method(name, *args, rounds=None): +@@ -98,7 +98,9 @@ def _add_method(name, *args, rounds=None): result = crypt('', salt) except OSError as e: # Not all libc libraries support all encryption methods. @@ -38,5 +38,5 @@ index 33dbc46bb3..4692a5270c 100644 raise if result and len(result) == method.total_size: -- -2.25.4 +2.34.1 diff --git a/package/python3/python3.hash b/package/python3/python3.hash index f9b8e2ec8d..c4ee79305d 100644 --- a/package/python3/python3.hash +++ b/package/python3/python3.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6a30ecde59c47048013eb5a658c9b5dec277203d2793667f578df7671f7f03f3 Python-3.10.8.tar.xz -sha256 d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b LICENSE +sha256 a57dc82d77358617ba65b9841cee1e3b441f386c3789ddc0676eca077f2951c3 Python-3.11.0.tar.xz +sha256 f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b LICENSE diff --git a/package/python3/python3.mk b/package/python3/python3.mk index 4131941e11..50d125ba16 100644 --- a/package/python3/python3.mk +++ b/package/python3/python3.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON3_VERSION_MAJOR = 3.10 -PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).8 +PYTHON3_VERSION_MAJOR = 3.11 +PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).0 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION) PYTHON3_LICENSE = Python-2.0, others @@ -41,7 +41,12 @@ HOST_PYTHON3_CONF_ENV += \ PYTHON3_DEPENDENCIES = host-python3 libffi -HOST_PYTHON3_DEPENDENCIES = host-autoconf-archive host-expat host-zlib host-libffi +HOST_PYTHON3_DEPENDENCIES = \ + host-autoconf-archive \ + host-expat \ + host-libffi \ + host-pkgconf \ + host-zlib ifeq ($(BR2_PACKAGE_HOST_PYTHON3_BZIP2),y) HOST_PYTHON3_DEPENDENCIES += host-bzip2 @@ -174,6 +179,7 @@ endif PYTHON3_CONF_OPTS += \ --without-ensurepip \ --without-cxx-main \ + --with-build-python=$(HOST_DIR)/bin/python3 \ --with-system-ffi \ --disable-pydoc \ --disable-test-modules \ -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 14:29:29 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 08:29:29 -0600 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 Message-ID: <20221025142929.3089316-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/kmod/kmod.hash | 2 +- package/kmod/kmod.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmod/kmod.hash b/package/kmod/kmod.hash index c68e41f1b6..b181f73e9b 100644 --- a/package/kmod/kmod.hash +++ b/package/kmod/kmod.hash @@ -1,5 +1,5 @@ # From https://www.kernel.org/pub/linux/utils/kernel/kmod/sha256sums.asc -sha256 0b80eea7aa184ac6fd20cafa2a1fdf290ffecc70869a797079e2cc5c6225a52a kmod-29.tar.xz +sha256 f897dd72698dc6ac1ef03255cd0a5734ad932318e4adbaebc7338ef2f5202f9f kmod-30.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 libkmod/COPYING diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..5d6d4408f9 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -4,7 +4,7 @@ # ################################################################################ -KMOD_VERSION = 29 +KMOD_VERSION = 30 KMOD_SOURCE = kmod-$(KMOD_VERSION).tar.xz KMOD_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/kmod KMOD_INSTALL_STAGING = YES -- 2.34.1 From eero.aaltonen at vaisala.com Tue Oct 25 14:57:27 2022 From: eero.aaltonen at vaisala.com (Aaltonen Eero) Date: Tue, 25 Oct 2022 14:57:27 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <20221022082645.20505-1-neal.frager@amd.com> References: <20221022082645.20505-1-neal.frager@amd.com> Message-ID: <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> On Sat, 2022-10-22 at 02:26 -0600, Neal Frager via buildroot wrote: > This patch adds Xilinx bootgen as a host package to buildroot. > bootgen is a required utility for generating a boot.bin for > Xilinx versal products. > > In addition, for developers who wish to use secure boot with > Xilinx SoC products such as zynq and zynqmp, bootgen has a > more complete offering in secure boot features than the u-boot > mkimage utility. AFAIU, this should also have a bootgen.hash file https://nightly.buildroot.org/#adding-packages-hash -- Regards, Eero From neal.frager at amd.com Tue Oct 25 15:00:16 2022 From: neal.frager at amd.com (Frager, Neal) Date: Tue, 25 Oct 2022 15:00:16 +0000 Subject: [Buildroot] [PATCH v1 1/1] package/bootgen: add bootgen host package In-Reply-To: <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> References: <20221022082645.20505-1-neal.frager@amd.com> <16bd1ade785531da3b54d0173aea5e9c921f1ff7.camel@vaisala.com> Message-ID: <458C9F7A-80E7-4D46-95AF-8953F724EEBC@amd.com> Hi Eero, > Le 25 oct. 2022 ? 16:57, Aaltonen Eero a ?crit : > > ?On Sat, 2022-10-22 at 02:26 -0600, Neal Frager via buildroot wrote: >> This patch adds Xilinx bootgen as a host package to buildroot. >> bootgen is a required utility for generating a boot.bin for >> Xilinx versal products. >> >> In addition, for developers who wish to use secure boot with >> Xilinx SoC products such as zynq and zynqmp, bootgen has a >> more complete offering in secure boot features than the u-boot >> mkimage utility. > > AFAIU, this should also have a bootgen.hash file > https://nightly.buildroot.org/#adding-packages-hash > > -- > Regards, > Eero Yes, this is superseded with v2 of the patch which has a hash file. Thank you for your feedback. Best regards, Neal Frager AMD From james.hilliard1 at gmail.com Tue Oct 25 15:00:48 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 09:00:48 -0600 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: add new host-pkgconf dependency Message-ID: <20221025150048.3640674-1-james.hilliard1@gmail.com> After updating to version 0.17 we need host-pkgconf. Fixes: - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 Signed-off-by: James Hilliard --- package/libpciaccess/libpciaccess.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index 68d46b7f50..525a3bcd02 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -10,6 +10,7 @@ LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING LIBPCIACCESS_INSTALL_STAGING = YES +LIBPCIACCESS_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_ZLIB),y) LIBPCIACCESS_CONF_OPTS += --with-zlib -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 18:06:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 12:06:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/zbar: fix python 3.11 compatibility Message-ID: <20221025180603.886122-1-james.hilliard1@gmail.com> Add a patch from upstream pull request to fix build with python 3.11. Fixes: python/enum.c: In function ?enumitem_new?: python/enum.c:55:25: error: lvalue required as left operand of assignment 55 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ python/enum.c: In function ?zbarEnumItem_New?: python/enum.c:146:25: error: lvalue required as left operand of assignment 146 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ Signed-off-by: James Hilliard --- ...ython-enum-fix-build-for-Python-3.11.patch | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch diff --git a/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch new file mode 100644 index 0000000000..f525b62184 --- /dev/null +++ b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch @@ -0,0 +1,62 @@ +From fbaec4b4e6fe735efe6916fe5b92805a0d96bf8a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?= + +Date: Wed, 21 Sep 2022 10:32:11 +0700 +Subject: [PATCH] python: enum: fix build for Python 3.11 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Python 3.9 introduced Py_SET_SIZE function to set size instead of +relying on Py_SIZE() as a macro [3.9]. + +Python 3.10 started to encourage to use Py_SET_SIZE instead of +assigning into return value of Py_SIZE [3.10]. + +Python 3.11 flips the switch, turn Py_SIZE into a function [3.11], +thus Py_SIZE(obj) will be a rvalue. We need to use Py_SET_SIZE +to set size now. + +[3.9]: https://docs.python.org/3.9/c-api/structures.html#c.Py_SET_SIZE +[3.10]: https://docs.python.org/3.10/c-api/structures.html#c.Py_SIZE +[3.11]: https://docs.python.org/3.11/c-api/structures.html#c.Py_SIZE + +Signed-off-by: ?o?n Tr?n C?ng Danh +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/mchehab/zbar/pull/231] +--- + python/enum.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/python/enum.c b/python/enum.c +index dfe1b1e..946344f 100644 +--- a/python/enum.c ++++ b/python/enum.c +@@ -52,7 +52,11 @@ enumitem_new (PyTypeObject *type, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + #else +@@ -143,7 +147,11 @@ zbarEnumItem_New (PyObject *byname, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + +-- +2.34.1 + -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:44 +0200 Subject: [Buildroot] [PATCH 1/1] package/lirc-tools: bump to version 0.10.2 In-Reply-To: <20221023141706.197964-1-fontaine.fabrice@gmail.com> References: <20221023141706.197964-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202244.70c4556f@windsurf> On Sun, 23 Oct 2022 16:17:06 +0200 Fabrice Fontaine wrote: > - Drop first to third patches (already in version) > - Add a patch to disable documentation and avoid a build failure without > doxygen > > https://sourceforge.net/p/lirc/git/ci/lirc-0.10.2/tree/NEWS > > Signed-off-by: Fabrice Fontaine > --- > .../0001-Fix-build-without-Python.patch | 63 ------------------- > ...evinput.c-fix-build-with-musl-1.2.0.patch} | 0 > ...0002-Fix-python-client-cross-compile.patch | 47 -------------- > ...002-configure-add-disable-doc-option.patch | 52 +++++++++++++++ > ...irc-version-detection-when-cross-com.patch | 51 --------------- > package/lirc-tools/lirc-tools.hash | 8 +-- > package/lirc-tools/lirc-tools.mk | 2 +- > 7 files changed, 57 insertions(+), 166 deletions(-) > delete mode 100644 package/lirc-tools/0001-Fix-build-without-Python.patch > rename package/lirc-tools/{0004-plugins-devinput.c-fix-build-with-musl-1.2.0.patch => 0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch} (100%) > delete mode 100644 package/lirc-tools/0002-Fix-python-client-cross-compile.patch > create mode 100644 package/lirc-tools/0002-configure-add-disable-doc-option.patch > delete mode 100644 package/lirc-tools/0003-python-pkg-Fix-lirc-version-detection-when-cross-com.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 In-Reply-To: <20221023165026.13707-1-fontaine.fabrice@gmail.com> References: <20221023165026.13707-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202250.656b2750@windsurf> On Sun, 23 Oct 2022 18:50:26 +0200 Fabrice Fontaine wrote: > - Drop all patches (already in version) > - Replace README by LICENSE file added with > https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/releases/tag/v1.2.13 > > Signed-off-by: Fabrice Fontaine > --- > ...hat-discarded-provided-CC-definition.patch | 28 --------------- > package/libzlib/0002-fix-CVE-2022-37434.patch | 35 ------------------- > .../0003-fix-CVE-2022-37434-regression.patch | 32 ----------------- > package/libzlib/libzlib.hash | 4 +-- > package/libzlib/libzlib.mk | 7 ++-- > 5 files changed, 4 insertions(+), 102 deletions(-) > delete mode 100644 package/libzlib/0001-Fix-configure-issue-that-discarded-provided-CC-definition.patch > delete mode 100644 package/libzlib/0002-fix-CVE-2022-37434.patch > delete mode 100644 package/libzlib/0003-fix-CVE-2022-37434-regression.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:22:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:22:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/libxmlpp: bump to version 5.0.2 In-Reply-To: <20221023165758.24401-1-fontaine.fabrice@gmail.com> References: <20221023165758.24401-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202255.3177ab1d@windsurf> On Sun, 23 Oct 2022 18:57:58 +0200 Fabrice Fontaine wrote: > https://github.com/libxmlplusplus/libxmlplusplus/blob/5.0.2/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libxmlpp/libxmlpp.hash | 4 ++-- > package/libxmlpp/libxmlpp.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/libssh: bump to version 0.10.4 In-Reply-To: <20221023170441.30650-1-fontaine.fabrice@gmail.com> References: <20221023170441.30650-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202300.3258e142@windsurf> On Sun, 23 Oct 2022 19:04:41 +0200 Fabrice Fontaine wrote: > https://git.libssh.org/projects/libssh.git/tree/CHANGELOG?h=libssh-0.10.4 > > Signed-off-by: Fabrice Fontaine > --- > package/libssh/libssh.hash | 4 ++-- > package/libssh/libssh.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/libshout: bump to version 2.4.6 In-Reply-To: <20221023204044.23467-1-fontaine.fabrice@gmail.com> References: <20221023204044.23467-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202305.4429d5ef@windsurf> On Sun, 23 Oct 2022 22:40:44 +0200 Fabrice Fontaine wrote: > - Drop patch (already in version) and so autoreconf > - libvorbis is optional since > https://gitlab.xiph.org/xiph/icecast-libshout/-/commit/181ac9f3f51825077194599f5c4621fa323b1b7f > > https://gitlab.xiph.org/xiph/icecast-libshout/-/blob/v2.4.6/NEWS > > Signed-off-by: Fabrice Fontaine > --- > ...re.ac-add-an-option-to-disable-tools.patch | 51 ------------------- > package/libshout/Config.in | 1 - > package/libshout/libshout.hash | 4 +- > package/libshout/libshout.mk | 13 +++-- > 4 files changed, 11 insertions(+), 58 deletions(-) > delete mode 100644 package/libshout/0001-configure.ac-add-an-option-to-disable-tools.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpng: bump to version 1.6.38 In-Reply-To: <20221023204719.31316-1-fontaine.fabrice@gmail.com> References: <20221023204719.31316-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202309.506460be@windsurf> On Sun, 23 Oct 2022 22:47:19 +0200 Fabrice Fontaine wrote: > Version 1.6.38 [September 14, 2022] > Added configurations and scripts for continuous integration. > Fixed various errors in the handling of tRNS, hIST and eXIf. > Implemented many stability improvements across all platforms. > Updated the internal documentation. > > Update hash of LICENSE file (update in year with > https://sourceforge.net/p/libpng/code/ci/723b2d9f2e2bb65c605274ee052f9773e594a5aa) > > https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES > > Signed-off-by: Fabrice Fontaine > --- > package/libpng/libpng.hash | 10 +++++----- > package/libpng/libpng.mk | 2 +- > 2 files changed, 6 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/libminiupnpc: bump to version 2.2.4 In-Reply-To: <20221023205440.36753-1-fontaine.fabrice@gmail.com> References: <20221023205440.36753-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202315.1372ec80@windsurf> On Sun, 23 Oct 2022 22:54:40 +0200 Fabrice Fontaine wrote: > 2022/02/20: > upnpc: use of @ to replace local lan address > > 2021/11/09: > python module : Allow to specify the root description url > > - Drop patch (already in version) > - Update hash of LICENSE file (license "refined" for github with > https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) > > http://miniupnp.free.fr/files/changelog.php?file=miniupnpc-2.2.4.tar.gz > > Signed-off-by: Fabrice Fontaine > --- > ...akeLists-txt-fix-install-for-headers.patch | 43 ------------------- > package/libminiupnpc/libminiupnpc.hash | 4 +- > package/libminiupnpc/libminiupnpc.mk | 2 +- > 3 files changed, 3 insertions(+), 46 deletions(-) > delete mode 100644 package/libminiupnpc/0001-miniupnpc-CMakeLists-txt-fix-install-for-headers.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/lensfun: bump to version 0.3.3 In-Reply-To: <20221023210951.48256-1-fontaine.fabrice@gmail.com> References: <20221023210951.48256-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202320.1dffc4a8@windsurf> On Sun, 23 Oct 2022 23:09:51 +0200 Fabrice Fontaine wrote: > Switch to new upstream site to get latest release > > https://lensfun.github.io/changelog/2022/02/22/Release-0.3.3-Changelog/ > > Signed-off-by: Fabrice Fontaine > --- > package/lensfun/Config.in | 2 +- > package/lensfun/lensfun.hash | 5 +---- > package/lensfun/lensfun.mk | 4 ++-- > 3 files changed, 4 insertions(+), 7 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:26 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: bump to version 2.1.8 In-Reply-To: <20221023212956.60845-1-fontaine.fabrice@gmail.com> References: <20221023212956.60845-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202326.30dd4283@windsurf> On Sun, 23 Oct 2022 23:29:56 +0200 Fabrice Fontaine wrote: > 2.1.8 (as of August 5th, 2022) > ------------------------------ > - Add support for --bounceback to perform a repsonsiveness test (see man > page for other options) > - add support for working loads with --bounceback > - Fix to wait_tick with Mac OS X > - Various python pyflows commits > - add support for client side tcp-write-time histograms and mean/min/max > - add support for human readable dscp or -T values (see man page) > - udp_accept no longer accepts packets from a previous run as a new > connection, this can occur with long network delays > - multiple isoch bug fixes for both UDP and TCP > - isoch server provides mean/min/max/stdev for both frames and packets > - UDP max MTU discovery, requires configure.ac will support > --enable-discover-defaultlen prior to compile Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf3: bump to version 3.12 In-Reply-To: <20221023214220.70941-1-fontaine.fabrice@gmail.com> References: <20221023214220.70941-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202330.64f8e443@windsurf> On Sun, 23 Oct 2022 23:42:20 +0200 Fabrice Fontaine wrote: > Update hash of LICENSE file (update in year with > https://github.com/esnet/iperf/commit/76bd67f6e90e239a7686202d2b1b595159826d24) > > https://github.com/esnet/iperf/blob/3.12/RELNOTES.md > > Signed-off-by: Fabrice Fontaine > --- > package/iperf3/iperf3.hash | 6 +++--- > package/iperf3/iperf3.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 18:23:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:23:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: bump to version 5.43 In-Reply-To: <20221023214902.85185-1-fontaine.fabrice@gmail.com> References: <20221023214902.85185-1-fontaine.fabrice@gmail.com> Message-ID: <20221025202335.4f4dcb67@windsurf> On Sun, 23 Oct 2022 23:49:02 +0200 Fabrice Fontaine wrote: > Update hash of src/vasprintf.c (typo fixed with > https://github.com/file/file/commit/42a6724bf9a9af6b1560100282fbe95341cf7125) > > https://github.com/file/file/blob/FILE5_43/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/file/file.hash | 6 +++--- > package/file/file.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From buildroot at heine.tech Tue Oct 25 18:24:11 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 20:24:11 +0200 Subject: [Buildroot] [PATCH] package/grpc: bump to version 1.50.0 Message-ID: <20221025182419.250668-1-buildroot@heine.tech> drop cross-compile patch which is now upstream (again). Signed-off-by: Michael Nosthoff --- ...conditionally-downloading-api-repos.patch} | 0 .../0004-fix-grpc-plugin-cross-compile.patch | 43 ------------------- package/grpc/grpc.hash | 2 +- package/grpc/grpc.mk | 2 +- 4 files changed, 2 insertions(+), 45 deletions(-) rename package/grpc/{0005-disable-unconditionally-downloading-api-repos.patch => 0004-disable-unconditionally-downloading-api-repos.patch} (100%) delete mode 100644 package/grpc/0004-fix-grpc-plugin-cross-compile.patch diff --git a/package/grpc/0005-disable-unconditionally-downloading-api-repos.patch b/package/grpc/0004-disable-unconditionally-downloading-api-repos.patch similarity index 100% rename from package/grpc/0005-disable-unconditionally-downloading-api-repos.patch rename to package/grpc/0004-disable-unconditionally-downloading-api-repos.patch diff --git a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch b/package/grpc/0004-fix-grpc-plugin-cross-compile.patch deleted file mode 100644 index d4e18a7853..0000000000 --- a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 6798193f062676fddf7fee6d0c928f8ce6d92894 Mon Sep 17 00:00:00 2001 -From: Michael Nosthoff -Date: Thu, 21 Jul 2022 22:14:32 +0200 -Subject: [PATCH] cmake: fix cross-compilation with - gRPC_BUILD_GRPC_CPP_PLUGIN=OFF - -commit 99752b173cfa reintroduced the cross-compilation issue which was fixed by da10b795e177 - -upstream PR: https://github.com/grpc/grpc/pull/30378 - -Signed-off-by: Michael Nosthoff - ---- - CMakeLists.txt | 2 +- - templates/CMakeLists.txt.template | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 9cad96a12f95..11e7ae2b67df 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -514,7 +514,7 @@ function(protobuf_generate_grpc_cpp_with_import_path_correction FILE_LOCATION IM - --plugin=protoc-gen-grpc=${_gRPC_CPP_PLUGIN} - ${_protobuf_include_path} - ${REL_FIL} -- DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} ${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY ${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for ${IMPORT_PATH}" - VERBATIM) -diff --git a/templates/CMakeLists.txt.template b/templates/CMakeLists.txt.template -index 161cf46798f1..82fe4217913a 100644 ---- a/templates/CMakeLists.txt.template -+++ b/templates/CMakeLists.txt.template -@@ -498,7 +498,7 @@ - --plugin=protoc-gen-grpc=<%text>${_gRPC_CPP_PLUGIN} - <%text>${_protobuf_include_path} - <%text>${REL_FIL} -- DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} <%text>${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY <%text>${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for <%text>${IMPORT_PATH}" - VERBATIM) diff --git a/package/grpc/grpc.hash b/package/grpc/grpc.hash index 9ef976a60a..4d838703cc 100644 --- a/package/grpc/grpc.hash +++ b/package/grpc/grpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 5071b630e2a14707ad060636990f1b25b0984bd168c7ea1ab95e48a3bdc0081f grpc-1.49.1.tar.gz +sha256 76900ab068da86378395a8e125b5cc43dfae671e09ff6462ddfef18676e2165a grpc-1.50.0.tar.gz sha256 590198e3f305f2c347fde64d637c65492bbef554db6c8364e149cd375e3797ee LICENSE diff --git a/package/grpc/grpc.mk b/package/grpc/grpc.mk index 5f28e86113..9aac241e47 100644 --- a/package/grpc/grpc.mk +++ b/package/grpc/grpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRPC_VERSION = 1.49.1 +GRPC_VERSION = 1.50.0 GRPC_SITE = $(call github,grpc,grpc,v$(GRPC_VERSION)) GRPC_LICENSE = Apache-2.0, BSD-3-Clause (third_party code), MPL-2.0 (etc/roots.pem) GRPC_LICENSE_FILES = LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:39:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:39:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: bump to version 1.0.5 In-Reply-To: <20221021223144.116049-1-fontaine.fabrice@gmail.com> References: <20221021223144.116049-1-fontaine.fabrice@gmail.com> Message-ID: <20221025203913.5d74f83d@windsurf> On Sat, 22 Oct 2022 00:31:44 +0200 Fabrice Fontaine wrote: > https://github.com/drowe67/codec2/releases/tag/v1.0.3 > https://github.com/drowe67/codec2/releases/tag/v1.0.4 > https://github.com/drowe67/codec2/releases/tag/v1.0.5 > > Signed-off-by: Fabrice Fontaine > --- > package/libcodec2/libcodec2.hash | 2 +- > package/libcodec2/libcodec2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) This update is apparently causing quite some breakage: http://autobuild.buildroot.net/?reason=libcodec2-1.0.5 Could you have a look perhaps? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From buildroot at heine.tech Tue Oct 25 18:50:39 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 20:50:39 +0200 Subject: [Buildroot] [PATCH] package/{python-}protobuf: bump to version 21.8 Message-ID: <20221025185040.317759-1-buildroot@heine.tech> Signed-off-by: Michael Nosthoff --- package/protobuf/protobuf.hash | 2 +- package/protobuf/protobuf.mk | 2 +- package/python-protobuf/python-protobuf.hash | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/protobuf/protobuf.hash b/package/protobuf/protobuf.hash index 03138a59e7..24dbc0f1a1 100644 --- a/package/protobuf/protobuf.hash +++ b/package/protobuf/protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -sha256 a3c4c104b98a21a577ce5ecc0d9b9f43a359b917d0bcf69467b70dc27416dfdc protobuf-cpp-3.21.6.tar.gz +sha256 f6251f2d00aad41b34c1dfa3d752713cb1bb1b7020108168a4deaa206ba8ed42 protobuf-cpp-3.21.8.tar.gz diff --git a/package/protobuf/protobuf.mk b/package/protobuf/protobuf.mk index fbc495c438..88f359f24c 100644 --- a/package/protobuf/protobuf.mk +++ b/package/protobuf/protobuf.mk @@ -7,7 +7,7 @@ # When bumping this package, make sure to also verify if the # python-protobuf package still works and to update its hash, # as they share the same version/site variables. -PROTOBUF_VERSION = 21.6 +PROTOBUF_VERSION = 21.8 PROTOBUF_SOURCE = protobuf-cpp-3.$(PROTOBUF_VERSION).tar.gz PROTOBUF_SITE = https://github.com/protocolbuffers/protobuf/releases/download/v$(PROTOBUF_VERSION) PROTOBUF_LICENSE = BSD-3-Clause diff --git a/package/python-protobuf/python-protobuf.hash b/package/python-protobuf/python-protobuf.hash index b0662124a9..a12c199663 100644 --- a/package/python-protobuf/python-protobuf.hash +++ b/package/python-protobuf/python-protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a014a0108e18c06a0c0308d92cdcae6ee106e4b02dd2ab1ff7073c4c80153aea protobuf-python-4.21.6.tar.gz +sha256 d81ebc20030fe8d03bceb38f06aba2797c40852e5aab6819481ce808fb305fae protobuf-python-4.21.8.tar.gz sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 18:54:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 20:54:12 +0200 Subject: [Buildroot] [git commit] package/harfbuzz: bump version to 5.3.1 Message-ID: <20221025185424.741B787069@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eab2203476a9d57ef647ebaba360b50d6718d73e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/harfbuzz/harfbuzz.hash | 2 +- package/harfbuzz/harfbuzz.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/harfbuzz/harfbuzz.hash b/package/harfbuzz/harfbuzz.hash index 9ec5c63f55..9489f25c6a 100644 --- a/package/harfbuzz/harfbuzz.hash +++ b/package/harfbuzz/harfbuzz.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 2edb95db668781aaa8d60959d21be2ff80085f31b12053cdd660d9a50ce84f05 harfbuzz-5.1.0.tar.xz +sha256 4a6ce097b75a8121facc4ba83b5b083bfec657f45b003cd5a3424f2ae6b4434d harfbuzz-5.3.1.tar.xz sha256 4345e1735f8bc6d812fed5180cabb5a5e88a4109d332652f2a45c13cfa5ee692 COPYING diff --git a/package/harfbuzz/harfbuzz.mk b/package/harfbuzz/harfbuzz.mk index 75d55106ea..b0112168e1 100644 --- a/package/harfbuzz/harfbuzz.mk +++ b/package/harfbuzz/harfbuzz.mk @@ -4,7 +4,7 @@ # ################################################################################ -HARFBUZZ_VERSION = 5.1.0 +HARFBUZZ_VERSION = 5.3.1 HARFBUZZ_SITE = https://github.com/harfbuzz/harfbuzz/releases/download/$(HARFBUZZ_VERSION) HARFBUZZ_SOURCE = harfbuzz-$(HARFBUZZ_VERSION).tar.xz HARFBUZZ_LICENSE = MIT, ISC (ucdn library) From buildroot at heine.tech Tue Oct 25 19:01:09 2022 From: buildroot at heine.tech (Michael Nosthoff) Date: Tue, 25 Oct 2022 21:01:09 +0200 Subject: [Buildroot] [PATCH v3] package/catch2: new package Message-ID: <20221025190109.320525-1-buildroot@heine.tech> Catch2 is a modern C++ unit testing framework which is increasing in popularity. This package is staging only and allows to build tests to be run on the target. - https://github.com/catchorg/Catch2 Signed-off-by: Michael Nosthoff -- v2: - fix name in Config.in comment v3: - bump to version 3.1.1 - build as static lib as shared lib is not really supported [0] - drop host package [0] https://github.com/catchorg/Catch2/blob/devel/docs/faq.md --- DEVELOPERS | 1 + package/Config.in | 1 + package/catch2/Config.in | 28 ++++++++++++++++++++++++++++ package/catch2/catch2.hash | 3 +++ package/catch2/catch2.mk | 19 +++++++++++++++++++ 5 files changed, 52 insertions(+) create mode 100644 package/catch2/Config.in create mode 100644 package/catch2/catch2.hash create mode 100644 package/catch2/catch2.mk diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..7da9dc48c9 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2098,6 +2098,7 @@ F: package/gnuplot/ F: package/sdl2/ N: Michael Nosthoff +F: package/catch2/ F: package/grpc/ F: package/gtest/ F: package/libabseil-cpp/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..9e7a68d8e9 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1968,6 +1968,7 @@ menu "Other" source "package/boost/Config.in" source "package/c-capnproto/Config.in" source "package/capnproto/Config.in" + source "package/catch2/Config.in" source "package/cctz/Config.in" source "package/cereal/Config.in" source "package/clang/Config.in" diff --git a/package/catch2/Config.in b/package/catch2/Config.in new file mode 100644 index 0000000000..2f53d197b2 --- /dev/null +++ b/package/catch2/Config.in @@ -0,0 +1,28 @@ +config BR2_PACKAGE_CATCH2 + bool "catch2" + depends on BR2_USE_WCHAR + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # C++14 + depends on BR2_USE_MMU # fork() + help + Catch2 is mainly a unit testing framework for C++, but it + also provides basic micro-benchmarking features, and simple + BDD macros. + + Catch2's main advantage is that using it is both simple and + natural. Tests autoregister themselves and do not have to + be named with valid identifiers, assertions look like + normal C++ code, and sections provide a nice way to share + set-up and tear-down code in tests. + + This package allows running testsuites on the target which + might be advantageous in certain cases. + + https://github.com/catchorg/Catch2 + +comment "catch2 needs a toolchain w/ C++, wchar, threads, gcc >= 4.9" + depends on BR2_USE_MMU + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 diff --git a/package/catch2/catch2.hash b/package/catch2/catch2.hash new file mode 100644 index 0000000000..76f6aea150 --- /dev/null +++ b/package/catch2/catch2.hash @@ -0,0 +1,3 @@ +# Locally computed: +sha256 2106bccfec18c8ce673623d56780220e38527dd8f283ccba26aa4b8758737d0e v3.1.1.tar.gz +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE.txt diff --git a/package/catch2/catch2.mk b/package/catch2/catch2.mk new file mode 100644 index 0000000000..b38f88e4da --- /dev/null +++ b/package/catch2/catch2.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# catch2 +# +################################################################################ + +CATCH2_VERSION = 3.1.1 +CATCH2_SOURCE = v$(CATCH2_VERSION).tar.gz +CATCH2_SITE = https://github.com/catchorg/Catch2/archive +CATCH2_INSTALL_STAGING = YES +CATCH2_INSTALL_TARGET = NO +CATCH2_LICENSE = BSL-1.0 +CATCH2_LICENSE_FILES = LICENSE.txt +CATCH2_SUPPORTS_IN_SOURCE_BUILD = NO + +CATCH2_CONF_OPTS = -DCATCH_INSTALL_DOCS=OFF \ + -DBUILD_SHARED_LIBS=OFF + +$(eval $(cmake-package)) -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 19:02:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 13:02:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/nodejs: bypass configure shell wrapper Message-ID: <20221025190236.1190494-1-james.hilliard1@gmail.com> The configure file is a shell script which searches for a predefined python binary and then calls configure.py with that. As we already call configure with the desired python binary we should call configure.py directly so that the expected python binary is used and so that the shell wrapper doesn't throw spurious interpreter validation errors. This also avoid spurious errors due to the configure shell wrapper missing supported python versions, for example this fixes: Node.js configure: Found Python 3.11.0... Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. /usr/bin/python3.10 ./configure Signed-off-by: James Hilliard --- package/nodejs/nodejs.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 05456e3443..29a10b900f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -88,7 +88,7 @@ define HOST_NODEJS_CONFIGURE_CMDS $(HOST_CONFIGURE_OPTS) \ PATH=$(@D)/bin:$(BR_PATH) \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=$(HOST_DIR) \ --without-dtrace \ --without-etw \ @@ -200,7 +200,7 @@ define NODEJS_CONFIGURE_CMDS LDFLAGS="$(NODEJS_LDFLAGS)" \ LD="$(TARGET_CXX)" \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=/usr \ --dest-cpu=$(NODEJS_CPU) \ $(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \ -- 2.34.1 From james.hilliard1 at gmail.com Tue Oct 25 19:22:19 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 13:22:19 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-cchardet: fix python 3.11 compatibility Message-ID: <20221025192219.1296974-1-james.hilliard1@gmail.com> Add host-python-cython so that cython will generate python 3.11 compatible sources instead of using the python 3.11 incompatible pre-built sources. Signed-off-by: James Hilliard --- package/python-cchardet/python-cchardet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/python-cchardet/python-cchardet.mk b/package/python-cchardet/python-cchardet.mk index 396e9d6c53..53a17f6732 100644 --- a/package/python-cchardet/python-cchardet.mk +++ b/package/python-cchardet/python-cchardet.mk @@ -10,5 +10,6 @@ PYTHON_CCHARDET_SITE = https://files.pythonhosted.org/packages/a8/5d/090c9f0312b PYTHON_CCHARDET_SETUP_TYPE = setuptools PYTHON_CCHARDET_LICENSE = MPL-1.1 PYTHON_CCHARDET_LICENSE_FILES = COPYING +PYTHON_CCHARDET_DEPENDENCIES = host-python-cython $(eval $(python-package)) -- 2.34.1 From thomas.petazzoni at bootlin.com Tue Oct 25 20:06:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:06:02 +0200 Subject: [Buildroot] [PATCH] package/harfbuzz: bump version to 5.3.1 In-Reply-To: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> References: <20221020174031.335520-1-giulio.benetti@benettiengineering.com> Message-ID: <20221025220602.154d1807@windsurf> On Thu, 20 Oct 2022 19:40:31 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/harfbuzz/harfbuzz.hash | 2 +- > package/harfbuzz/harfbuzz.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From bugzilla at busybox.net Tue Oct 25 20:13:21 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:13:21 +0000 Subject: [Buildroot] [Bug 15006] toolchain Arm AArch64 toolchain 11.2-2022.02 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15006 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #2 from Thomas Petazzoni --- Fixed by https://gitlab.com/buildroot.org/buildroot/-/commit/ab828e25fb3ea640cfa7e85a5dd765db208db80a. -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Tue Oct 25 20:13:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:13:59 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict Message-ID: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> This commit backports the patch "fixinc: don't "fix" machine names in __has_include(...)" from upstream GCC, which is needed to resolve a header conflict between glibc headers and kernel headers, which has appeared since we bumped glibc to version 2.36 in commit 80c8c15c8534a24382b900a07082a289a368f736. The problem comes from the "fixinc" logic used by gcc to fixup some headers files, generated inside an include-fixed/ folder. This logic ended up replacing "linux/mount.h" by "__linux__/mount.h" in __has_include() invocation, like this: #ifdef __has_include # if __has_include ("__linux__/mount.h") # include "linux/mount.h" # endif #endif in build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With this fix in place, this "include-fixed" header is no longer generated, avoiding the problem. This issue was visible in two different ways in glibc configurations: - As a build failure during the gcc build itself, for architectures that support libsanitizer, as libsanitizer includes mount.h, and would therefore encounter the header conflict. - As a build failure during another user-space package (such as sysvinit for example), on architectures when libsanitizer isn't used, and therefore for which the gcc build was successful, but the header conflict shows up when building some "random" user-space package. The problem is already fixed in GCC 12.2.0, so no patch is required. The problem did not exist back in GCC 8.4.0, so this version does not need patching. Consequently, the patch is only needed for GCC 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. Fixes: (gcc build issue, on architecture that supports libsanitizer) http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ (sysvinit build issue, on architecture that does not support libsanitizer) http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ (crun) http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ (libarchive) http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. Fixes: https://bugs.busybox.net/show_bug.cgi?id=15021 Signed-off-by: Thomas Petazzoni --- ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ 3 files changed, 372 insertions(+) create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8614537794 --- /dev/null +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..4e93f6ab96 --- /dev/null +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 5b23a8b640d..404b420f302 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index 066bef99162..b7ad6982e96 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3154,7 +3154,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8b6be49e68 --- /dev/null +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + -- 2.37.3 From bugzilla at busybox.net Tue Oct 25 20:20:44 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:20:44 +0000 Subject: [Buildroot] [Bug 14936] nodejs does not build In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14936 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Status|NEW |RESOLVED --- Comment #5 from Thomas Petazzoni --- This has been fixed in commit https://gitlab.com/buildroot.org/buildroot/-/commit/5708c5b04f09f49a99c2c9d7a1894d24bce6a3e7. -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Tue Oct 25 20:22:57 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Tue, 25 Oct 2022 20:22:57 +0000 Subject: [Buildroot] [Bug 14916] build buildroot with glibc and linux kernel 5.4, start with qemu will cause error: "FATAL: kernel too old" In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=14916 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |NEEDINFO Status|NEW |RESOLVED --- Comment #5 from Thomas Petazzoni --- No feedback from the contributor, insufficient information to reproduce, so closing the bug. -- You are receiving this mail because: You are on the CC list for the bug. From thomas.petazzoni at bootlin.com Tue Oct 25 20:38:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:38:57 +0200 Subject: [Buildroot] [git commit] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 Message-ID: <20221025205532.41CFC87076@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=196cbd98010ae0145cfe555fa835e761b40b23fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html https://www.phoronix.com/news/Mesa-22.2-Released Removed patches included in upstream release, renumbered remaining patches. Signed-off-by: Bernd Kuhls Signed-off-by: Thomas Petazzoni --- package/mesa3d-headers/mesa3d-headers.mk | 2 +- ...-import-isinf-for-uclibc-based-toolchains.patch | 30 ----- ...n-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 ...n-option-to-disable-optional-neon-suppor.patch} | 0 ...d_xor-Include-stddef.h-to-fix-build-erro.patch} | 0 ...ibc-build.patch => 0004-Fix-uClibc-build.patch} | 0 ...tex.h-fix-build-on-32-bit-architectures-u.patch | 43 ------- ...til-remove-needless-c99-compat-h-includes.patch | 126 --------------------- .../mesa3d/0007-include-drop-c11-compat-h.patch | 100 ---------------- package/mesa3d/mesa3d.hash | 8 +- package/mesa3d/mesa3d.mk | 2 +- 11 files changed, 6 insertions(+), 305 deletions(-) diff --git a/package/mesa3d-headers/mesa3d-headers.mk b/package/mesa3d-headers/mesa3d-headers.mk index 7a777fb783..3712c79db0 100644 --- a/package/mesa3d-headers/mesa3d-headers.mk +++ b/package/mesa3d-headers/mesa3d-headers.mk @@ -12,7 +12,7 @@ endif # Not possible to directly refer to mesa3d variables, because of # first/second expansion trickery... -MESA3D_HEADERS_VERSION = 22.1.6 +MESA3D_HEADERS_VERSION = 22.2.2 MESA3D_HEADERS_SOURCE = mesa-$(MESA3D_HEADERS_VERSION).tar.xz MESA3D_HEADERS_SITE = https://archive.mesa3d.org MESA3D_HEADERS_DL_SUBDIR = mesa3d diff --git a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch b/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch deleted file mode 100644 index 5acbaa4daa..0000000000 --- a/package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 705490763fcc052defa2d49a5c5200775cd12c54 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Wed, 4 Mar 2020 08:27:24 +0100 -Subject: [PATCH] c99_math: import isinf for uclibc based toolchains - -The same fix as for glibc >= 2.23 is needed for uclibc -based toolchains. - -[Upstream suggested: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4042] -Signed-off-by: Peter Seiderer ---- - include/c99_math.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/c99_math.h b/include/c99_math.h -index e906c26aa54..c8a73a2d2c7 100644 ---- a/include/c99_math.h -+++ b/include/c99_math.h -@@ -190,7 +190,7 @@ fpclassify(double x) - * undefines those functions, which in glibc 2.23, are defined as macros rather - * than functions as in glibc 2.22. - */ --#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23)) -+#if __cplusplus >= 201103L && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 23) || defined(__UCLIBC__)) - #include - - using std::fpclassify; --- -2.25.1 - diff --git a/package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch similarity index 100% rename from package/mesa3d/0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch rename to package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch diff --git a/package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch b/package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch similarity index 100% rename from package/mesa3d/0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch rename to package/mesa3d/0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch diff --git a/package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch b/package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch similarity index 100% rename from package/mesa3d/0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch rename to package/mesa3d/0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch diff --git a/package/mesa3d/0008-Fix-uClibc-build.patch b/package/mesa3d/0004-Fix-uClibc-build.patch similarity index 100% rename from package/mesa3d/0008-Fix-uClibc-build.patch rename to package/mesa3d/0004-Fix-uClibc-build.patch diff --git a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch b/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch deleted file mode 100644 index b01db8a4b4..0000000000 --- a/package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch +++ /dev/null @@ -1,43 +0,0 @@ -From e501b7c17ada9c694d3f8302622b78d733485b38 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sat, 21 Aug 2021 17:55:33 +0200 -Subject: [PATCH] src/util/futex.h: fix build on 32-bit architectures using - 64-bit time_t - -Fix the following build failure on 32-bit architectures using 64-bit -time_t (e.g. riscv32): - -../src/util/futex.h: In function 'sys_futex': -../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'? - 39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); - | ^~~~~~~~~ - | sys_futex - -Fixes: - - http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12496] ---- - src/util/futex.h | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/util/futex.h b/src/util/futex.h -index 43097f4cd5b..221eda9db0c 100644 ---- a/src/util/futex.h -+++ b/src/util/futex.h -@@ -34,6 +34,10 @@ - #include - #include - -+#ifndef SYS_futex -+#define SYS_futex SYS_futex_time64 -+#endif -+ - static inline long sys_futex(void *addr1, int op, int val1, const struct timespec *timeout, void *addr2, int val3) - { - return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3); --- -2.32.0 - diff --git a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch b/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch deleted file mode 100644 index cac61b351a..0000000000 --- a/package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 9f717b5f23cbf24dc4c58bc688c931af91975e80 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 14:17:43 +0200 -Subject: util: remove needless c99_compat.h includes - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/patch/?id=9f717b5f23cbf24dc4c58bc688c931af91975e80 - -Signed-off-by: Bernd Kuhls ---- - src/util/bitscan.h | 2 -- - src/util/compiler.h | 2 -- - src/util/format_srgb.h | 1 - - src/util/hash_table.h | 1 - - src/util/list.h | 1 - - src/util/macros.h | 1 - - src/util/mesa-sha1.h | 1 - - src/util/ptralloc.h | 1 - - 8 files changed, 10 deletions(-) - -diff --git a/src/util/bitscan.h b/src/util/bitscan.h -index 726d2d2c385..53cbb91e98c 100644 ---- a/src/util/bitscan.h -+++ b/src/util/bitscan.h -@@ -42,8 +42,6 @@ - #include - #endif - --#include "c99_compat.h" -- - #ifdef __cplusplus - extern "C" { - #endif -diff --git a/src/util/compiler.h b/src/util/compiler.h -index 83f8e346a08..d184ad455af 100644 ---- a/src/util/compiler.h -+++ b/src/util/compiler.h -@@ -38,8 +38,6 @@ - - #include "util/macros.h" - --#include "c99_compat.h" /* inline, __func__, etc. */ -- - - /** - * Either define MESA_BIG_ENDIAN or MESA_LITTLE_ENDIAN, and CPU_TO_LE32. -diff --git a/src/util/format_srgb.h b/src/util/format_srgb.h -index 596af56f4cd..5861b238270 100644 ---- a/src/util/format_srgb.h -+++ b/src/util/format_srgb.h -@@ -39,7 +39,6 @@ - - #include - #include --#include "c99_compat.h" - - extern const float - util_format_srgb_8unorm_to_linear_float_table[256]; -diff --git a/src/util/hash_table.h b/src/util/hash_table.h -index c8a96b79edf..002d6c58873 100644 ---- a/src/util/hash_table.h -+++ b/src/util/hash_table.h -@@ -31,7 +31,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus -diff --git a/src/util/list.h b/src/util/list.h -index 5ef49e4e955..edc596f3d2d 100644 ---- a/src/util/list.h -+++ b/src/util/list.h -@@ -41,7 +41,6 @@ - #include - #include - #include --#include "c99_compat.h" - - #ifdef DEBUG - # define list_assert(cond, msg) assert(cond && msg) -diff --git a/src/util/macros.h b/src/util/macros.h -index 2138f5d662d..a5dc4846211 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -27,7 +27,6 @@ - #include - #include - --#include "c99_compat.h" - #include "c11_compat.h" - - #include -diff --git a/src/util/mesa-sha1.h b/src/util/mesa-sha1.h -index 9d174fd9b99..809fabc525f 100644 ---- a/src/util/mesa-sha1.h -+++ b/src/util/mesa-sha1.h -@@ -26,7 +26,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "sha1/sha1.h" - - #ifdef __cplusplus -diff --git a/src/util/ptralloc.h b/src/util/ptralloc.h -index f74d8c3645d..ca6ded82a2d 100644 ---- a/src/util/ptralloc.h -+++ b/src/util/ptralloc.h -@@ -29,7 +29,6 @@ - #include - #include - #include --#include "c99_compat.h" - #include "macros.h" - - #ifdef __cplusplus --- -cgit v1.2.1 - diff --git a/package/mesa3d/0007-include-drop-c11-compat-h.patch b/package/mesa3d/0007-include-drop-c11-compat-h.patch deleted file mode 100644 index 64cdb8074b..0000000000 --- a/package/mesa3d/0007-include-drop-c11-compat-h.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df2dd474c73982e89d0ed71951ff723eb7060ce6 Mon Sep 17 00:00:00 2001 -From: Erik Faye-Lund -Date: Wed, 1 Jun 2022 13:38:39 +0200 -Subject: include: drop c11_compat.h - -We now require C11, and C++ supports static_assert just fine, which is -the only thing this header ever added support for. So let's get rid of -this needless header. - -Reviewed-by: Jesse Natalie -Reviewed-by: Alyssa Rosenzweig -Reviewed-by: Eric Engestrom -Part-of: - -Downloaded from upstream commit -https://cgit.freedesktop.org/mesa/mesa/commit/?id=df2dd474c73982e89d0ed71951ff723eb7060ce6 - -Signed-off-by: Bernd Kuhls ---- - include/c11_compat.h | 27 --------------------------- - src/amd/common/ac_sqtt.h | 1 - - src/imagination/vulkan/pvr_cmd_buffer.c | 1 - - src/util/macros.h | 3 --- - 4 files changed, 32 deletions(-) - delete mode 100644 include/c11_compat.h - -diff --git a/include/c11_compat.h b/include/c11_compat.h -deleted file mode 100644 -index d35740f47a4..00000000000 ---- a/include/c11_compat.h -+++ /dev/null -@@ -1,27 +0,0 @@ --/* Copyright 2019 Intel Corporation */ --/* SPDX-License-Identifier: MIT */ -- --#include "no_extern_c.h" -- --#ifndef _C11_COMPAT_H_ --#define _C11_COMPAT_H_ -- --#if defined(__cplusplus) -- /* This is C++ code, not C */ --#elif (__STDC_VERSION__ >= 201112L) -- /* Already C11 */ --#else -- -- --/* -- * C11 static_assert() macro -- * assert.h only defines that name for C11 and above -- */ --#ifndef static_assert --#define static_assert _Static_assert --#endif -- -- --#endif /* !C++ && !C11 */ -- --#endif /* _C11_COMPAT_H_ */ -diff --git a/src/amd/common/ac_sqtt.h b/src/amd/common/ac_sqtt.h -index 55130aa2221..05798b7e1da 100644 ---- a/src/amd/common/ac_sqtt.h -+++ b/src/amd/common/ac_sqtt.h -@@ -30,7 +30,6 @@ - #include - - #include --#include "c11_compat.h" - #include "ac_rgp.h" - - struct radeon_cmdbuf; -diff --git a/src/imagination/vulkan/pvr_cmd_buffer.c b/src/imagination/vulkan/pvr_cmd_buffer.c -index 0afd463e2fb..4fe224f481d 100644 ---- a/src/imagination/vulkan/pvr_cmd_buffer.c -+++ b/src/imagination/vulkan/pvr_cmd_buffer.c -@@ -29,7 +29,6 @@ - #include - #include - --#include "c11_compat.h" - #include "hwdef/rogue_hw_defs.h" - #include "hwdef/rogue_hw_utils.h" - #include "pvr_bo.h" -diff --git a/src/util/macros.h b/src/util/macros.h -index a5dc4846211..dd8af86bcf8 100644 ---- a/src/util/macros.h -+++ b/src/util/macros.h -@@ -26,9 +26,6 @@ - - #include - #include -- --#include "c11_compat.h" -- - #include - - /* Compute the size of an array */ --- -cgit v1.2.1 - diff --git a/package/mesa3d/mesa3d.hash b/package/mesa3d/mesa3d.hash index ab20063cd9..f10f8fe112 100644 --- a/package/mesa3d/mesa3d.hash +++ b/package/mesa3d/mesa3d.hash @@ -1,5 +1,5 @@ -# From https://lists.freedesktop.org/archives/mesa-announce/2022-August/000683.html -sha256 22ced061eb9adab8ea35368246c1995c09723f3f71653cd5050c5cec376e671a mesa-22.1.6.tar.xz -sha512 3b2a0bb781c3d540401e6f51e3cf0d87d4e22923b6a5a4ea9d8ce5c79b4a2d5e8b1c237a36325d7d7178448ae102470ebefb312644dc09818cce91fd5439cb07 mesa-22.1.6.tar.xz +# From https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html +sha256 2de11fb74fc5cc671b818e49fe203cea0cd1d8b69756e97cdb06a2f4e78948f9 mesa-22.2.2.tar.xz +sha512 a1eb67e1ae4880c79b1fdc570f4389baba0b8ba796da7e695c9af19a7d92b6c06b95570e6c796548b61355989025fb7efbf9acac74cbd695f7e297dc913b933c mesa-22.2.2.tar.xz # License -sha256 4bc15d14dcc134b024cbdca3b5330010136ce8a427b6f8353440ce2ad7aab037 docs/license.rst +sha256 a00275a53178e2645fb65be99a785c110513446a5071ff2c698ed260ad917d75 docs/license.rst diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index daefd6f6d5..bac071ecb3 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -5,7 +5,7 @@ ################################################################################ # When updating the version, please also update mesa3d-headers -MESA3D_VERSION = 22.1.6 +MESA3D_VERSION = 22.2.2 MESA3D_SOURCE = mesa-$(MESA3D_VERSION).tar.xz MESA3D_SITE = https://archive.mesa3d.org MESA3D_LICENSE = MIT, SGI, Khronos From thomas.petazzoni at bootlin.com Tue Oct 25 20:55:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:55:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/{mesa3d, mesa3d-headers}: bump version to 22.2.2 In-Reply-To: <20221020185459.28407-1-bernd.kuhls@t-online.de> References: <20221020185459.28407-1-bernd.kuhls@t-online.de> Message-ID: <20221025225533.3aa6c869@windsurf> On Thu, 20 Oct 2022 20:54:59 +0200 Bernd Kuhls wrote: > Release notes: > https://lists.freedesktop.org/archives/mesa-announce/2022-October/000689.html > https://lists.freedesktop.org/archives/mesa-announce/2022-October/000688.html > https://lists.freedesktop.org/archives/mesa-announce/2022-September/000687.html > https://www.phoronix.com/news/Mesa-22.2-Released > > Removed patches included in upstream release, renumbered remaining > patches. > > Signed-off-by: Bernd Kuhls > --- > package/mesa3d-headers/mesa3d-headers.mk | 2 +- > ...rt-isinf-for-uclibc-based-toolchains.patch | 30 ----- > ...-proper-value-for-LIBCLC_INCLUDEDIR.patch} | 0 > ...ion-to-disable-optional-neon-suppor.patch} | 0 > ...-Include-stddef.h-to-fix-build-erro.patch} | 0 > ...uild.patch => 0004-Fix-uClibc-build.patch} | 0 > ...-fix-build-on-32-bit-architectures-u.patch | 43 ------ > ...emove-needless-c99-compat-h-includes.patch | 126 ------------------ > .../0007-include-drop-c11-compat-h.patch | 100 -------------- > package/mesa3d/mesa3d.hash | 8 +- > package/mesa3d/mesa3d.mk | 2 +- > 11 files changed, 6 insertions(+), 305 deletions(-) > delete mode 100644 package/mesa3d/0001-c99_math-import-isinf-for-uclibc-based-toolchains.patch > rename package/mesa3d/{0002-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch => 0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch} (100%) > rename package/mesa3d/{0003-vc4-add-meson-option-to-disable-optional-neon-suppor.patch => 0002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch} (100%) > rename package/mesa3d/{0004-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch => 0003-src-util-rand_xor-Include-stddef.h-to-fix-build-erro.patch} (100%) > rename package/mesa3d/{0008-Fix-uClibc-build.patch => 0004-Fix-uClibc-build.patch} (100%) > delete mode 100644 package/mesa3d/0005-src-util-futex.h-fix-build-on-32-bit-architectures-u.patch > delete mode 100644 package/mesa3d/0006-util-remove-needless-c99-compat-h-includes.patch > delete mode 100644 package/mesa3d/0007-include-drop-c11-compat-h.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:05 +0200 Subject: [Buildroot] [PATCH 1/1] package/nodejs: bypass configure shell wrapper In-Reply-To: <20221025190236.1190494-1-james.hilliard1@gmail.com> References: <20221025190236.1190494-1-james.hilliard1@gmail.com> Message-ID: <20221025225705.31a1975c@windsurf> On Tue, 25 Oct 2022 13:02:36 -0600 James Hilliard wrote: > The configure file is a shell script which searches for a predefined > python binary and then calls configure.py with that. > > As we already call configure with the desired python binary we should > call configure.py directly so that the expected python binary is used > and so that the shell wrapper doesn't throw spurious interpreter > validation errors. > > This also avoid spurious errors due to the configure shell wrapper > missing supported python versions, for example this fixes: > Node.js configure: Found Python 3.11.0... > Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. > /usr/bin/python3.10 ./configure > > Signed-off-by: James Hilliard > --- > package/nodejs/nodejs.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:30 +0200 Subject: [Buildroot] [git commit] package/python-cchardet: fix python 3.11 compatibility Message-ID: <20221025205740.9280587086@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6833dd5079b8017bde37b7d3ef201d35450a12e6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add host-python-cython so that cython will generate python 3.11 compatible sources instead of using the python 3.11 incompatible pre-built sources. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-cchardet/python-cchardet.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/python-cchardet/python-cchardet.mk b/package/python-cchardet/python-cchardet.mk index 396e9d6c53..53a17f6732 100644 --- a/package/python-cchardet/python-cchardet.mk +++ b/package/python-cchardet/python-cchardet.mk @@ -10,5 +10,6 @@ PYTHON_CCHARDET_SITE = https://files.pythonhosted.org/packages/a8/5d/090c9f0312b PYTHON_CCHARDET_SETUP_TYPE = setuptools PYTHON_CCHARDET_LICENSE = MPL-1.1 PYTHON_CCHARDET_LICENSE_FILES = COPYING +PYTHON_CCHARDET_DEPENDENCIES = host-python-cython $(eval $(python-package)) From thomas.petazzoni at bootlin.com Tue Oct 25 20:56:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:56:58 +0200 Subject: [Buildroot] [git commit] package/nodejs: bypass configure shell wrapper Message-ID: <20221025205740.8758D87084@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f073cf7547e6bef74768aee1aef67f3b28bee8c0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The configure file is a shell script which searches for a predefined python binary and then calls configure.py with that. As we already call configure with the desired python binary we should call configure.py directly so that the expected python binary is used and so that the shell wrapper doesn't throw spurious interpreter validation errors. This also avoid spurious errors due to the configure shell wrapper missing supported python versions, for example this fixes: Node.js configure: Found Python 3.11.0... Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6. /usr/bin/python3.10 ./configure Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/nodejs/nodejs.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk index 05456e3443..29a10b900f 100644 --- a/package/nodejs/nodejs.mk +++ b/package/nodejs/nodejs.mk @@ -88,7 +88,7 @@ define HOST_NODEJS_CONFIGURE_CMDS $(HOST_CONFIGURE_OPTS) \ PATH=$(@D)/bin:$(BR_PATH) \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=$(HOST_DIR) \ --without-dtrace \ --without-etw \ @@ -200,7 +200,7 @@ define NODEJS_CONFIGURE_CMDS LDFLAGS="$(NODEJS_LDFLAGS)" \ LD="$(TARGET_CXX)" \ PYTHON=$(HOST_DIR)/bin/python3 \ - $(HOST_DIR)/bin/python3 ./configure \ + $(HOST_DIR)/bin/python3 configure.py \ --prefix=/usr \ --dest-cpu=$(NODEJS_CPU) \ $(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \ From thomas.petazzoni at bootlin.com Tue Oct 25 20:57:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:57:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-cchardet: fix python 3.11 compatibility In-Reply-To: <20221025192219.1296974-1-james.hilliard1@gmail.com> References: <20221025192219.1296974-1-james.hilliard1@gmail.com> Message-ID: <20221025225742.52be95f2@windsurf> On Tue, 25 Oct 2022 13:22:19 -0600 James Hilliard wrote: > Add host-python-cython so that cython will generate python 3.11 > compatible sources instead of using the python 3.11 incompatible > pre-built sources. > > Signed-off-by: James Hilliard > --- > package/python-cchardet/python-cchardet.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:39 +0200 Subject: [Buildroot] [PATCH] package/grpc: bump to version 1.50.0 In-Reply-To: <20221025182419.250668-1-buildroot@heine.tech> References: <20221025182419.250668-1-buildroot@heine.tech> Message-ID: <20221025225839.713862d5@windsurf> On Tue, 25 Oct 2022 20:24:11 +0200 Michael Nosthoff via buildroot wrote: > drop cross-compile patch which is now upstream (again). > > Signed-off-by: Michael Nosthoff > --- > ...conditionally-downloading-api-repos.patch} | 0 > .../0004-fix-grpc-plugin-cross-compile.patch | 43 ------------------- > package/grpc/grpc.hash | 2 +- > package/grpc/grpc.mk | 2 +- > 4 files changed, 2 insertions(+), 45 deletions(-) > rename package/grpc/{0005-disable-unconditionally-downloading-api-repos.patch => 0004-disable-unconditionally-downloading-api-repos.patch} (100%) > delete mode 100644 package/grpc/0004-fix-grpc-plugin-cross-compile.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:00 +0200 Subject: [Buildroot] [git commit] package/grpc: bump to version 1.50.0 Message-ID: <20221025205852.AC28487093@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a9f5a9926f089bf0c7943049751fefa6035ce469 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master drop cross-compile patch which is now upstream (again). Signed-off-by: Michael Nosthoff Signed-off-by: Thomas Petazzoni --- ...le-unconditionally-downloading-api-repos.patch} | 0 .../grpc/0004-fix-grpc-plugin-cross-compile.patch | 43 ---------------------- package/grpc/grpc.hash | 2 +- package/grpc/grpc.mk | 2 +- 4 files changed, 2 insertions(+), 45 deletions(-) diff --git a/package/grpc/0005-disable-unconditionally-downloading-api-repos.patch b/package/grpc/0004-disable-unconditionally-downloading-api-repos.patch similarity index 100% rename from package/grpc/0005-disable-unconditionally-downloading-api-repos.patch rename to package/grpc/0004-disable-unconditionally-downloading-api-repos.patch diff --git a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch b/package/grpc/0004-fix-grpc-plugin-cross-compile.patch deleted file mode 100644 index d4e18a7853..0000000000 --- a/package/grpc/0004-fix-grpc-plugin-cross-compile.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 6798193f062676fddf7fee6d0c928f8ce6d92894 Mon Sep 17 00:00:00 2001 -From: Michael Nosthoff -Date: Thu, 21 Jul 2022 22:14:32 +0200 -Subject: [PATCH] cmake: fix cross-compilation with - gRPC_BUILD_GRPC_CPP_PLUGIN=OFF - -commit 99752b173cfa reintroduced the cross-compilation issue which was fixed by da10b795e177 - -upstream PR: https://github.com/grpc/grpc/pull/30378 - -Signed-off-by: Michael Nosthoff - ---- - CMakeLists.txt | 2 +- - templates/CMakeLists.txt.template | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/CMakeLists.txt b/CMakeLists.txt -index 9cad96a12f95..11e7ae2b67df 100644 ---- a/CMakeLists.txt -+++ b/CMakeLists.txt -@@ -514,7 +514,7 @@ function(protobuf_generate_grpc_cpp_with_import_path_correction FILE_LOCATION IM - --plugin=protoc-gen-grpc=${_gRPC_CPP_PLUGIN} - ${_protobuf_include_path} - ${REL_FIL} -- DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} ${ABS_FIL} ${_gRPC_PROTOBUF_PROTOC} ${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY ${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for ${IMPORT_PATH}" - VERBATIM) -diff --git a/templates/CMakeLists.txt.template b/templates/CMakeLists.txt.template -index 161cf46798f1..82fe4217913a 100644 ---- a/templates/CMakeLists.txt.template -+++ b/templates/CMakeLists.txt.template -@@ -498,7 +498,7 @@ - --plugin=protoc-gen-grpc=<%text>${_gRPC_CPP_PLUGIN} - <%text>${_protobuf_include_path} - <%text>${REL_FIL} -- DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} grpc_cpp_plugin -+ DEPENDS <%text>${CMAKE_CURRENT_SOURCE_DIR}/${FILE_LOCATION} <%text>${ABS_FIL} <%text>${_gRPC_PROTOBUF_PROTOC} <%text>${_gRPC_CPP_PLUGIN} - WORKING_DIRECTORY <%text>${_gRPC_PROTO_SRCS_DIR} - COMMENT "Running gRPC C++ protocol buffer compiler for <%text>${IMPORT_PATH}" - VERBATIM) diff --git a/package/grpc/grpc.hash b/package/grpc/grpc.hash index 9ef976a60a..4d838703cc 100644 --- a/package/grpc/grpc.hash +++ b/package/grpc/grpc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 5071b630e2a14707ad060636990f1b25b0984bd168c7ea1ab95e48a3bdc0081f grpc-1.49.1.tar.gz +sha256 76900ab068da86378395a8e125b5cc43dfae671e09ff6462ddfef18676e2165a grpc-1.50.0.tar.gz sha256 590198e3f305f2c347fde64d637c65492bbef554db6c8364e149cd375e3797ee LICENSE diff --git a/package/grpc/grpc.mk b/package/grpc/grpc.mk index 5f28e86113..9aac241e47 100644 --- a/package/grpc/grpc.mk +++ b/package/grpc/grpc.mk @@ -4,7 +4,7 @@ # ################################################################################ -GRPC_VERSION = 1.49.1 +GRPC_VERSION = 1.50.0 GRPC_SITE = $(call github,grpc,grpc,v$(GRPC_VERSION)) GRPC_LICENSE = Apache-2.0, BSD-3-Clause (third_party code), MPL-2.0 (etc/roots.pem) GRPC_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:28 +0200 Subject: [Buildroot] [git commit] package/{python-}protobuf: bump to version 21.8 Message-ID: <20221025205852.B5DB687094@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13a8417f0de1649ebb51fcd2e02862310b7b3d43 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Michael Nosthoff Signed-off-by: Thomas Petazzoni --- package/protobuf/protobuf.hash | 2 +- package/protobuf/protobuf.mk | 2 +- package/python-protobuf/python-protobuf.hash | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/protobuf/protobuf.hash b/package/protobuf/protobuf.hash index 03138a59e7..24dbc0f1a1 100644 --- a/package/protobuf/protobuf.hash +++ b/package/protobuf/protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE -sha256 a3c4c104b98a21a577ce5ecc0d9b9f43a359b917d0bcf69467b70dc27416dfdc protobuf-cpp-3.21.6.tar.gz +sha256 f6251f2d00aad41b34c1dfa3d752713cb1bb1b7020108168a4deaa206ba8ed42 protobuf-cpp-3.21.8.tar.gz diff --git a/package/protobuf/protobuf.mk b/package/protobuf/protobuf.mk index fbc495c438..88f359f24c 100644 --- a/package/protobuf/protobuf.mk +++ b/package/protobuf/protobuf.mk @@ -7,7 +7,7 @@ # When bumping this package, make sure to also verify if the # python-protobuf package still works and to update its hash, # as they share the same version/site variables. -PROTOBUF_VERSION = 21.6 +PROTOBUF_VERSION = 21.8 PROTOBUF_SOURCE = protobuf-cpp-3.$(PROTOBUF_VERSION).tar.gz PROTOBUF_SITE = https://github.com/protocolbuffers/protobuf/releases/download/v$(PROTOBUF_VERSION) PROTOBUF_LICENSE = BSD-3-Clause diff --git a/package/python-protobuf/python-protobuf.hash b/package/python-protobuf/python-protobuf.hash index b0662124a9..a12c199663 100644 --- a/package/python-protobuf/python-protobuf.hash +++ b/package/python-protobuf/python-protobuf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a014a0108e18c06a0c0308d92cdcae6ee106e4b02dd2ab1ff7073c4c80153aea protobuf-python-4.21.6.tar.gz +sha256 d81ebc20030fe8d03bceb38f06aba2797c40852e5aab6819481ce808fb305fae protobuf-python-4.21.8.tar.gz sha256 6e5e117324afd944dcf67f36cf329843bc1a92229a8cd9bb573d7a83130fea7d LICENSE From thomas.petazzoni at bootlin.com Tue Oct 25 20:58:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:58:55 +0200 Subject: [Buildroot] [PATCH] package/{python-}protobuf: bump to version 21.8 In-Reply-To: <20221025185040.317759-1-buildroot@heine.tech> References: <20221025185040.317759-1-buildroot@heine.tech> Message-ID: <20221025225855.3cdfc398@windsurf> On Tue, 25 Oct 2022 20:50:39 +0200 Michael Nosthoff via buildroot wrote: > Signed-off-by: Michael Nosthoff > --- > package/protobuf/protobuf.hash | 2 +- > package/protobuf/protobuf.mk | 2 +- > package/python-protobuf/python-protobuf.hash | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221025142929.3089316-1-james.hilliard1@gmail.com> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> Message-ID: <20221025225930.051d1f9b@windsurf> On Tue, 25 Oct 2022 08:29:29 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/kmod/kmod.hash | 2 +- > package/kmod/kmod.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpciaccess: add new host-pkgconf dependency In-Reply-To: <20221025150048.3640674-1-james.hilliard1@gmail.com> References: <20221025150048.3640674-1-james.hilliard1@gmail.com> Message-ID: <20221025225951.5efe7b3e@windsurf> On Tue, 25 Oct 2022 09:00:48 -0600 James Hilliard wrote: > After updating to version 0.17 we need host-pkgconf. > > Fixes: > - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 > > Signed-off-by: James Hilliard > --- > package/libpciaccess/libpciaccess.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:43 +0200 Subject: [Buildroot] [git commit] package/libpciaccess: add new host-pkgconf dependency Message-ID: <20221025210022.C1DFF870A7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17065693f23996097d46e350b40c46795b7ffeac branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master After updating to version 0.17 we need host-pkgconf. Fixes: - http://autobuild.buildroot.net/results/d41/d41509feaa889979668fa5105ca1defca71567a6 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/libpciaccess/libpciaccess.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libpciaccess/libpciaccess.mk b/package/libpciaccess/libpciaccess.mk index 68d46b7f50..525a3bcd02 100644 --- a/package/libpciaccess/libpciaccess.mk +++ b/package/libpciaccess/libpciaccess.mk @@ -10,6 +10,7 @@ LIBPCIACCESS_SITE = http://xorg.freedesktop.org/releases/individual/lib LIBPCIACCESS_LICENSE = MIT LIBPCIACCESS_LICENSE_FILES = COPYING LIBPCIACCESS_INSTALL_STAGING = YES +LIBPCIACCESS_DEPENDENCIES = host-pkgconf ifeq ($(BR2_PACKAGE_ZLIB),y) LIBPCIACCESS_CONF_OPTS += --with-zlib From thomas.petazzoni at bootlin.com Tue Oct 25 20:59:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 22:59:15 +0200 Subject: [Buildroot] [git commit] package/kmod: bump to version 30 Message-ID: <20221025210022.B761B870A6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0861fed2f0ede61f45c7279028f7341519343913 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/kmod/kmod.hash | 2 +- package/kmod/kmod.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmod/kmod.hash b/package/kmod/kmod.hash index c68e41f1b6..b181f73e9b 100644 --- a/package/kmod/kmod.hash +++ b/package/kmod/kmod.hash @@ -1,5 +1,5 @@ # From https://www.kernel.org/pub/linux/utils/kernel/kmod/sha256sums.asc -sha256 0b80eea7aa184ac6fd20cafa2a1fdf290ffecc70869a797079e2cc5c6225a52a kmod-29.tar.xz +sha256 f897dd72698dc6ac1ef03255cd0a5734ad932318e4adbaebc7338ef2f5202f9f kmod-30.tar.xz # Locally calculated sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 libkmod/COPYING diff --git a/package/kmod/kmod.mk b/package/kmod/kmod.mk index 82e8597759..5d6d4408f9 100644 --- a/package/kmod/kmod.mk +++ b/package/kmod/kmod.mk @@ -4,7 +4,7 @@ # ################################################################################ -KMOD_VERSION = 29 +KMOD_VERSION = 30 KMOD_SOURCE = kmod-$(KMOD_VERSION).tar.xz KMOD_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/kmod KMOD_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:00:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:00:14 +0200 Subject: [Buildroot] [git commit] package/zbar: fix python 3.11 compatibility Message-ID: <20221025210022.CEB28870A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e3f25de3e81341de041879fb3dd458d8484c9d61 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch from upstream pull request to fix build with python 3.11. Fixes: python/enum.c: In function ???enumitem_new???: python/enum.c:55:25: error: lvalue required as left operand of assignment 55 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ python/enum.c: In function ???zbarEnumItem_New???: python/enum.c:146:25: error: lvalue required as left operand of assignment 146 | Py_SIZE(&self->val) = Py_SIZE(longval); | ^ Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- ...001-python-enum-fix-build-for-Python-3.11.patch | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch new file mode 100644 index 0000000000..f525b62184 --- /dev/null +++ b/package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch @@ -0,0 +1,62 @@ +From fbaec4b4e6fe735efe6916fe5b92805a0d96bf8a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?= + +Date: Wed, 21 Sep 2022 10:32:11 +0700 +Subject: [PATCH] python: enum: fix build for Python 3.11 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Python 3.9 introduced Py_SET_SIZE function to set size instead of +relying on Py_SIZE() as a macro [3.9]. + +Python 3.10 started to encourage to use Py_SET_SIZE instead of +assigning into return value of Py_SIZE [3.10]. + +Python 3.11 flips the switch, turn Py_SIZE into a function [3.11], +thus Py_SIZE(obj) will be a rvalue. We need to use Py_SET_SIZE +to set size now. + +[3.9]: https://docs.python.org/3.9/c-api/structures.html#c.Py_SET_SIZE +[3.10]: https://docs.python.org/3.10/c-api/structures.html#c.Py_SIZE +[3.11]: https://docs.python.org/3.11/c-api/structures.html#c.Py_SIZE + +Signed-off-by: ??o??n Tr???n C??ng Danh +Signed-off-by: James Hilliard +[Upstream status: +https://github.com/mchehab/zbar/pull/231] +--- + python/enum.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/python/enum.c b/python/enum.c +index dfe1b1e..946344f 100644 +--- a/python/enum.c ++++ b/python/enum.c +@@ -52,7 +52,11 @@ enumitem_new (PyTypeObject *type, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + #else +@@ -143,7 +147,11 @@ zbarEnumItem_New (PyObject *byname, + + /* we assume the "fast path" for a single-digit ints (see longobject.c) */ + /* this also holds if we get a small_int preallocated long */ ++#if PY_VERSION_HEX >= 0x03090000 ++ Py_SET_SIZE(&self->val, Py_SIZE(longval)); ++#else + Py_SIZE(&self->val) = Py_SIZE(longval); ++#endif + self->val.ob_digit[0] = longval->ob_digit[0]; + Py_DECREF(longval); + +-- +2.34.1 + From thomas.petazzoni at bootlin.com Tue Oct 25 21:00:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:00:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/zbar: fix python 3.11 compatibility In-Reply-To: <20221025180603.886122-1-james.hilliard1@gmail.com> References: <20221025180603.886122-1-james.hilliard1@gmail.com> Message-ID: <20221025230024.3ab84f31@windsurf> On Tue, 25 Oct 2022 12:06:03 -0600 James Hilliard wrote: > Add a patch from upstream pull request to fix build with python 3.11. > > Fixes: > python/enum.c: In function ?enumitem_new?: > python/enum.c:55:25: error: lvalue required as left operand of assignment > 55 | Py_SIZE(&self->val) = Py_SIZE(longval); > | ^ > python/enum.c: In function ?zbarEnumItem_New?: > python/enum.c:146:25: error: lvalue required as left operand of assignment > 146 | Py_SIZE(&self->val) = Py_SIZE(longval); > | ^ > > Signed-off-by: James Hilliard > --- > ...ython-enum-fix-build-for-Python-3.11.patch | 62 +++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:13 +0200 Subject: [Buildroot] [git commit] boot/grub2: ignore CVE-2021-46705 Message-ID: <20221025210622.2E380870B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=259314f016b0cd7cabfdcce88a5c11f1da5edd05 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This CVE is specific to the SUSE distribution. See https://security-tracker.debian.org/tracker/CVE-2021-46705. Signed-off-by: Thomas Petazzoni --- boot/grub2/grub2.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/boot/grub2/grub2.mk b/boot/grub2/grub2.mk index f04be05227..875884cf5c 100644 --- a/boot/grub2/grub2.mk +++ b/boot/grub2/grub2.mk @@ -32,6 +32,8 @@ GRUB2_IGNORE_CVES += CVE-2019-14865 GRUB2_IGNORE_CVES += CVE-2020-15705 # 0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch GRUB2_IGNORE_CVES += CVE-2021-3981 +# vulnerability is specific to the SUSE distribution +GRUB2_IGNORE_CVES += CVE-2021-46705 ifeq ($(BR2_TARGET_GRUB2_INSTALL_TOOLS),y) GRUB2_INSTALL_TARGET = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:09 +0200 Subject: [Buildroot] [git commit] boot/grub2: add patch to fix CVE-2021-3981 Message-ID: <20221025210622.267E3870B1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51b04fc02c8ec204b13cbf1f854328c7ca276a20 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This commit backports an upstream commit that fixes CVE-2021-3981. Signed-off-by: Thomas Petazzoni --- ...b-mkconfig-Restore-umask-for-the-grub.cfg.patch | 43 ++++++++++++++++++++++ boot/grub2/grub2.mk | 2 + 2 files changed, 45 insertions(+) diff --git a/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch b/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch new file mode 100644 index 0000000000..0d6a1a6e01 --- /dev/null +++ b/boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch @@ -0,0 +1,43 @@ +From 8418defaf0902bdd8af188221ae54c5a3d6ad05d Mon Sep 17 00:00:00 2001 +From: Michael Chang +Date: Fri, 3 Dec 2021 16:13:28 +0800 +Subject: [PATCH] grub-mkconfig: Restore umask for the grub.cfg + +The commit ab2e53c8a (grub-mkconfig: Honor a symlink when generating +configuration by grub-mkconfig) has inadvertently discarded umask for +creating grub.cfg in the process of running grub-mkconfig. The resulting +wrong permission (0644) would allow unprivileged users to read GRUB +configuration file content. This presents a low confidentiality risk +as grub.cfg may contain non-secured plain-text passwords. + +This patch restores the missing umask and sets the creation file mode +to 0600 preventing unprivileged access. + +Fixes: CVE-2021-3981 + +Signed-off-by: Michael Chang +Reviewed-by: Daniel Kiper +[Upstream: https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commit;h=0adec29674561034771c13e446069b41ef41e4d4] +Signed-off-by: Thomas Petazzoni +--- + util/grub-mkconfig.in | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/util/grub-mkconfig.in b/util/grub-mkconfig.in +index f8cbb8d7a..84f356ea4 100644 +--- a/util/grub-mkconfig.in ++++ b/util/grub-mkconfig.in +@@ -300,7 +300,10 @@ and /etc/grub.d/* files or please file a bug report with + exit 1 + else + # none of the children aborted with error, install the new grub.cfg ++ oldumask=$(umask) ++ umask 077 + cat ${grub_cfg}.new > ${grub_cfg} ++ umask $oldumask + rm -f ${grub_cfg}.new + fi + fi +-- +2.37.2 + diff --git a/boot/grub2/grub2.mk b/boot/grub2/grub2.mk index 4e7e0fa898..f04be05227 100644 --- a/boot/grub2/grub2.mk +++ b/boot/grub2/grub2.mk @@ -30,6 +30,8 @@ GRUB2_IGNORE_CVES += CVE-2019-14865 # grub_linuxefi_secure_validate() is not implemented in the grub2 # version available in Buildroot. GRUB2_IGNORE_CVES += CVE-2020-15705 +# 0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch +GRUB2_IGNORE_CVES += CVE-2021-3981 ifeq ($(BR2_TARGET_GRUB2_INSTALL_TOOLS),y) GRUB2_INSTALL_TARGET = YES From thomas.petazzoni at bootlin.com Tue Oct 25 21:06:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:06:38 +0200 Subject: [Buildroot] [PATCH 1/2] boot/grub2: add patch to fix CVE-2021-3981 In-Reply-To: <20220920212921.732287-1-thomas.petazzoni@bootlin.com> References: <20220920212921.732287-1-thomas.petazzoni@bootlin.com> Message-ID: <20221025230638.715c53e5@windsurf> On Tue, 20 Sep 2022 23:29:19 +0200 Thomas Petazzoni wrote: > This commit backports an upstream commit that fixes CVE-2021-3981. > > Signed-off-by: Thomas Petazzoni > --- > ...onfig-Restore-umask-for-the-grub.cfg.patch | 43 +++++++++++++++++++ > boot/grub2/grub2.mk | 2 + > 2 files changed, 45 insertions(+) > create mode 100644 boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Tue Oct 25 21:07:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:07:57 +0200 Subject: [Buildroot] [git commit] package/gdb: enable host-gdb and gdbserver support for or1k with gdb 12.1 Message-ID: <20221025211117.573CF870B9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=382d33dfa64202a79968ff54d729fb37479cbd65 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The gdbserver support for or1k is available since 12.1 release, since commit [1]. Restrict the gdb version choice for or1k to 12.1 for simplicity. Also enable host-gdb to connect to the gdbserver on the target. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4 Signed-off-by: Romain Naour Cc: Stafford Horne Signed-off-by: Thomas Petazzoni --- package/gdb/Config.in | 3 --- package/gdb/Config.in.host | 9 ++++++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/gdb/Config.in b/package/gdb/Config.in index 1cad3c4fd8..273b3072ae 100644 --- a/package/gdb/Config.in +++ b/package/gdb/Config.in @@ -17,8 +17,6 @@ config BR2_PACKAGE_GDB depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 depends on BR2_INSTALL_LIBSTDCPP - # no gdbserver on or1k - select BR2_PACKAGE_GDB_DEBUGGER if BR2_or1k # When the external toolchain gdbserver is copied to the # target, we don't allow building a separate gdbserver. The # one from the external toolchain should be used. @@ -45,7 +43,6 @@ if BR2_PACKAGE_GDB config BR2_PACKAGE_GDB_SERVER bool "gdbserver" depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY - depends on !BR2_or1k help Build the gdbserver stub to run on the target. A full gdb is needed to debug the progam. diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host index 3b8d456f1c..e8a34e0834 100644 --- a/package/gdb/Config.in.host +++ b/package/gdb/Config.in.host @@ -3,7 +3,6 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS default y depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT) depends on !BR2_microblaze - depends on !BR2_or1k comment "Host GDB Options" depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY @@ -49,9 +48,13 @@ choice config BR2_GDB_VERSION_10 bool "gdb 10.x" + # gdbserver support missing + depends on !BR2_or1k config BR2_GDB_VERSION_11 bool "gdb 11.x" + # gdbserver support missing + depends on !BR2_or1k config BR2_GDB_VERSION_12 bool "gdb 12.x" @@ -65,6 +68,6 @@ config BR2_GDB_VERSION string default "arc-2020.09-release-gdb" if BR2_arc default "10.2" if BR2_GDB_VERSION_10 - default "11.2" if BR2_GDB_VERSION_11 || !BR2_PACKAGE_HOST_GDB - default "12.1" if BR2_GDB_VERSION_12 + default "11.2" if BR2_GDB_VERSION_11 || (!BR2_PACKAGE_HOST_GDB && !BR2_or1k) + default "12.1" if BR2_GDB_VERSION_12 || (!BR2_PACKAGE_HOST_GDB && BR2_or1k) depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB From thomas.petazzoni at bootlin.com Tue Oct 25 21:11:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Tue, 25 Oct 2022 23:11:22 +0200 Subject: [Buildroot] [PATCH] package/gdb: gdb 12.1: enable host-gdb and gdbserver support for or1k In-Reply-To: <20220921143328.186633-1-romain.naour@gmail.com> References: <20220921143328.186633-1-romain.naour@gmail.com> Message-ID: <20221025231122.40aa1f4c@windsurf> On Wed, 21 Sep 2022 16:33:28 +0200 Romain Naour wrote: > The gdbserver support for or1k is available since 12.1 release, since > commit [1]. Restrict the gdb version choice for or1k to 12.1 for > simplicity. Also enable host-gdb to connect to the gdbserver on the > target. > > [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4 > > Signed-off-by: Romain Naour > Cc: Stafford Horne > --- > package/gdb/Config.in | 3 --- > package/gdb/Config.in.host | 9 ++++++--- > 2 files changed, 6 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Tue Oct 25 22:13:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:13:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: fix build without C++ Message-ID: <20221025221308.352026-1-fontaine.fabrice@gmail.com> Fix the following build failure without C++ raised since bump to version 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): The C++ compiler "/usr/bin/clang++" is not able to compile a simple test program. Fixes: - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 Signed-off-by: Fabrice Fontaine --- package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 package/libcodec2/0001-update-cmake.patch diff --git a/package/libcodec2/0001-update-cmake.patch b/package/libcodec2/0001-update-cmake.patch new file mode 100644 index 0000000000..e983800e27 --- /dev/null +++ b/package/libcodec2/0001-update-cmake.patch @@ -0,0 +1,301 @@ +From 812d69af486e608a10380ed5817b03d08c6e786a Mon Sep 17 00:00:00 2001 +From: "A. Maitland Bottoms" +Date: Sun, 17 Jul 2022 17:04:44 -0400 +Subject: [PATCH] update cmake + +Some minor refactoring of Codec2 build to better use CMake +features to improve readability ans maintainability. + +[Retrieved from: +https://github.com/drowe67/codec2/commit/812d69af486e608a10380ed5817b03d08c6e786a] +Signed-off-by: Fabrice Fontaine +--- + CMakeLists.txt | 48 +++++--------------------- + src/CMakeLists.txt | 84 ++++++++++++++++++++++++---------------------- + 2 files changed, 53 insertions(+), 79 deletions(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 54ac1f4f4..998af5ddf 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -5,19 +5,13 @@ + # Please report questions, comments, problems, or patches to the freetel + # mailing list: https://lists.sourceforge.net/lists/listinfo/freetel-codec2 + # +-set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") +- +-project(codec2) +- +-cmake_minimum_required(VERSION 3.0) +- +-# Set policies here, probably should move to cmake dir. +-if(POLICY CMP0075) +- cmake_policy(SET CMP0075 NEW) +-endif() +-if(POLICY CMP0079) +- cmake_policy(SET CMP0079 NEW) +-endif() ++cmake_minimum_required(VERSION 3.13) ++project(CODEC2 ++ VERSION 1.0.5 ++ DESCRIPTION "Next-Generation Digital Voice for Two-Way Radio" ++ HOMEPAGE_URL "https://www.rowetel.com/codec2.html" ++ LANGUAGES C ++ ) + + include(GNUInstallDirs) + mark_as_advanced(CLEAR +@@ -39,23 +33,6 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + "separate build directory and run cmake from there.") + endif("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + +-# +-# Set project version information. This should probably be done via external +-# file at some point. +-# +-set(CODEC2_VERSION_MAJOR 1) +-set(CODEC2_VERSION_MINOR 0) +-# Set to patch level if needed, otherwise leave FALSE. +-# Must be positive (non-zero) if set, since 0 == FALSE in CMake. +-set(CODEC2_VERSION_PATCH 5) +-set(CODEC2_VERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-# Patch level version bumps should not change API/ABI. +-set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-if(CODEC2_VERSION_PATCH) +- set(CODEC2_VERSION "${CODEC2_VERSION}.${CODEC2_VERSION_PATCH}") +-endif() +-message(STATUS "codec2 version: ${CODEC2_VERSION}") +- + # Set default build type + if(NOT CMAKE_BUILD_TYPE) + set(CMAKE_BUILD_TYPE "Debug") +@@ -65,6 +42,7 @@ endif() + if(BUILD_OSX_UNIVERSAL) + set(CMAKE_OSX_ARCHITECTURES "x86_64;arm64") + endif(BUILD_OSX_UNIVERSAL) ++set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") + + # + # Find the git hash if this is a working copy. +@@ -190,10 +168,6 @@ if (_GNU_SOURCE) + add_definitions(-D_GNU_SOURCE=1) + endif() + +-if(UNIX) +- set(CMAKE_REQUIRED_LIBRARIES m) +-endif() +- + check_symbol_exists(floor math.h HAVE_FLOOR) + check_symbol_exists(ceil math.h HAVE_CEIL) + check_symbol_exists(pow math.h HAVE_POW) +@@ -288,11 +262,7 @@ else() + endif() + + # Return the date (yyyy-mm-dd) +-macro(DATE RESULT) +- execute_process(COMMAND "date" "+%Y%m%d" OUTPUT_VARIABLE ${RESULT}) +-endmacro() +-DATE(DATE_RESULT) +-string(REGEX REPLACE "\n$" "" DATE_RESULT "${DATE_RESULT}") ++string(TIMESTAMP DATE_RESULT "%Y-%m-%d" UTC) + message(STATUS "Compilation date = XX${DATE_RESULT}XX") + + set(CPACK_PACKAGE_VERSION_PATCH "${CPACK_PACKAGE_VERSION_PATCH}-${DATE_RESULT}-${FREEDV_HASH}") +diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt +index 642404962..cb0990bc2 100644 +--- a/src/CMakeLists.txt ++++ b/src/CMakeLists.txt +@@ -81,7 +81,7 @@ else(CMAKE_CROSSCOMPILING) + # Build code generator binaries. These do not get installed. + # generate_codebook + add_executable(generate_codebook generate_codebook.c) +- target_link_libraries(generate_codebook m ${CMAKE_REQUIRED_LIBRARIES}) ++ target_link_libraries(generate_codebook m) + # Make native builds available for cross-compiling. + export(TARGETS generate_codebook + FILE ${CMAKE_BINARY_DIR}/ImportExecutables.cmake) +@@ -238,12 +238,16 @@ set(CODEC2_PUBLIC_HEADERS + # + # Setup the codec2 library + # ++# Patch level version bumps should not change API/ABI. ++set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") ++message(STATUS "codec2 version: ${CODEC2_VERSION}") + add_library(codec2 ${CODEC2_SRCS}) + if(UNIX) +- target_link_libraries(codec2 m) ++ target_link_libraries(codec2 PUBLIC m) + endif(UNIX) + if(LPCNET AND lpcnetfreedv_FOUND) +- target_link_libraries(codec2 lpcnetfreedv) ++ target_link_libraries(codec2 PRIVATE lpcnetfreedv) ++ list(APPEND CODEC2_PUBLIC_HEADERS ${CMAKE_SOURCE_DIR}/lpcnet/src/lpcnet_freedv.h) + endif() + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) + set_target_properties(codec2 PROPERTIES +@@ -269,70 +273,70 @@ export(TARGETS codec2 + ) + + add_executable(c2enc c2enc.c) +-target_link_libraries(c2enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2enc codec2) + + add_executable(c2dec c2dec.c) +-target_link_libraries(c2dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2dec codec2) + + add_executable(c2sim c2sim.c sd.c) +-target_link_libraries(c2sim ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2sim codec2) + + add_executable(fdmdv_get_test_bits fdmdv_get_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_get_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_get_test_bits m) + + add_executable(fdmdv_mod fdmdv_mod.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_mod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_mod m) + + add_executable(fdmdv_demod fdmdv_demod.c fdmdv.c kiss_fft.c octave.c modem_stats.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_demod m) + + add_executable(fdmdv_put_test_bits fdmdv_put_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_put_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_put_test_bits m) + + add_executable(fdmdv_channel fdmdv_channel.c) +-target_link_libraries(fdmdv_channel ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fdmdv_channel codec2) + + add_executable(insert_errors insert_errors.c) +-target_link_libraries(insert_errors ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(insert_errors) + + add_executable(freedv_tx freedv_tx.c) +-target_link_libraries(freedv_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_tx codec2) + + add_executable(freedv_rx freedv_rx.c) +-target_link_libraries(freedv_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_rx codec2) + + add_executable(freedv_data_raw_tx freedv_data_raw_tx.c) +-target_link_libraries(freedv_data_raw_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_tx codec2) + + add_executable(freedv_data_raw_rx freedv_data_raw_rx.c octave.c) +-target_link_libraries(freedv_data_raw_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_rx codec2) + + add_executable(freedv_data_tx freedv_data_tx.c) +-target_link_libraries(freedv_data_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_tx codec2) + + add_executable(freedv_data_rx freedv_data_rx.c) +-target_link_libraries(freedv_data_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_rx codec2) + + add_executable(freedv_mixed_tx freedv_mixed_tx.c) +-target_link_libraries(freedv_mixed_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_tx codec2) + + add_executable(freedv_mixed_rx freedv_mixed_rx.c) +-target_link_libraries(freedv_mixed_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_rx codec2) + + add_executable(fsk_mod fsk_mod.c) +-target_link_libraries(fsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_mod codec2) + + add_executable(fsk_mod_ext_vco fsk_mod_ext_vco.c) +-target_link_libraries(fsk_mod_ext_vco m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fsk_mod_ext_vco m) + + add_executable(fsk_demod fsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_demod codec2) + + add_executable(fsk_get_test_bits fsk_get_test_bits.c) + target_link_libraries(fsk_get_test_bits) + + add_executable(fsk_put_test_bits fsk_put_test_bits.c) +-target_link_libraries(fsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_put_test_bits codec2) + + add_executable(framer framer.c) + target_link_libraries(framer) +@@ -341,46 +345,46 @@ add_executable(deframer deframer.c) + target_link_libraries(deframer) + + add_executable(fm_demod fm_demod.c fm.c) +-target_link_libraries(fm_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fm_demod m) + + add_executable(cohpsk_mod cohpsk_mod.c) +-target_link_libraries(cohpsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_mod codec2) + + add_executable(ofdm_get_test_bits ofdm_get_test_bits.c) +-target_link_libraries(ofdm_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_get_test_bits codec2) + + add_executable(ofdm_put_test_bits ofdm_put_test_bits.c) +-target_link_libraries(ofdm_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_put_test_bits codec2) + + add_executable(ofdm_mod ofdm_mod.c) +-target_link_libraries(ofdm_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_mod codec2) + + add_executable(ofdm_demod ofdm_demod.c octave.c) +-target_link_libraries(ofdm_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_demod codec2) + + add_executable(fmfsk_mod fmfsk_mod.c) +-target_link_libraries(fmfsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_mod codec2) + + add_executable(fmfsk_demod fmfsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fmfsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_demod codec2) + + add_executable(vhf_deframe_c2 vhf_deframe_c2.c) +-target_link_libraries(vhf_deframe_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_deframe_c2 codec2) + + add_executable(vhf_frame_c2 vhf_frame_c2.c) +-target_link_libraries(vhf_frame_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_frame_c2 codec2) + + add_executable(cohpsk_demod cohpsk_demod.c octave.c) +-target_link_libraries(cohpsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_demod codec2) + + add_executable(cohpsk_get_test_bits cohpsk_get_test_bits.c) +-target_link_libraries(cohpsk_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_get_test_bits codec2) + + add_executable(cohpsk_put_test_bits cohpsk_put_test_bits.c octave.c) +-target_link_libraries(cohpsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_put_test_bits codec2) + + add_executable(ch ch.c) +-target_link_libraries(ch ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ch codec2) + + add_executable(tollr tollr.c) + +@@ -388,10 +392,10 @@ add_executable(ldpc_noise ldpc_noise.c) + target_link_libraries(ldpc_noise m) + + add_executable(ldpc_enc ldpc_enc.c) +-target_link_libraries(ldpc_enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_enc codec2) + + add_executable(ldpc_dec ldpc_dec.c) +-target_link_libraries(ldpc_dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_dec codec2) + + install(TARGETS codec2 EXPORT codec2-config + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT lib -- 2.35.1 From fontaine.fabrice at gmail.com Tue Oct 25 22:14:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:14:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/libffi: bump to version 3.4.4 Message-ID: <20221025221445.352620-1-fontaine.fabrice@gmail.com> 3.4.4 Oct-23-2022 Important aarch64 fixes, including support for linux builds with Link Time Optimization (-flto). Fix x86 stdcall stack alignment. Fix x86 Windows msvc assembler compatibility. Fix moxie and or1k small structure args. https://github.com/libffi/libffi/releases/tag/v3.4.4 Signed-off-by: Fabrice Fontaine --- package/libffi/libffi.hash | 2 +- package/libffi/libffi.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libffi/libffi.hash b/package/libffi/libffi.hash index 689b5da4f1..8d2349ec21 100644 --- a/package/libffi/libffi.hash +++ b/package/libffi/libffi.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 4416dd92b6ae8fcb5b10421e711c4d3cb31203d77521a77d85d0102311e6c3b8 libffi-3.4.3.tar.gz +sha256 d66c56ad259a82cf2a9dfc408b32bf5da52371500b84745f7fb8b645712df676 libffi-3.4.4.tar.gz # License files, locally calculated sha256 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388 LICENSE diff --git a/package/libffi/libffi.mk b/package/libffi/libffi.mk index ecfa120c7a..8f6844113c 100644 --- a/package/libffi/libffi.mk +++ b/package/libffi/libffi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBFFI_VERSION = 3.4.3 +LIBFFI_VERSION = 3.4.4 LIBFFI_SITE = \ https://github.com/libffi/libffi/releases/download/v$(LIBFFI_VERSION) LIBFFI_LICENSE = MIT -- 2.35.1 From james.hilliard1 at gmail.com Tue Oct 25 22:36:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 16:36:39 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-bottle: bump to version 0.12.23 Message-ID: <20221025223639.550839-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-bottle/python-bottle.hash | 4 ++-- package/python-bottle/python-bottle.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-bottle/python-bottle.hash b/package/python-bottle/python-bottle.hash index b1cc2aac20..58bc52e3cb 100644 --- a/package/python-bottle/python-bottle.hash +++ b/package/python-bottle/python-bottle.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/bottle/json -md5 4934ad7347eef30db669ccd05283a5e0 bottle-0.12.21.tar.gz -sha256 787c61b6cc02b9c229bf2663011fac53dd8fc197f7f8ad2eeede29d888d7887e bottle-0.12.21.tar.gz +md5 d07df795cd4baa596ee803e964ba77fd bottle-0.12.23.tar.gz +sha256 683de3aa399fb26e87b274dbcf70b1a651385d459131716387abdc3792e04167 bottle-0.12.23.tar.gz # Locally computed sha256 checksums sha256 d0e7211f1c3c1a1c56f39d18bcb07f27f480c8a9552617756dda3a335933b8a6 LICENSE diff --git a/package/python-bottle/python-bottle.mk b/package/python-bottle/python-bottle.mk index ffea59f38f..e1691972c3 100644 --- a/package/python-bottle/python-bottle.mk +++ b/package/python-bottle/python-bottle.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_BOTTLE_VERSION = 0.12.21 +PYTHON_BOTTLE_VERSION = 0.12.23 PYTHON_BOTTLE_SOURCE = bottle-$(PYTHON_BOTTLE_VERSION).tar.gz -PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/95/e3/5749d7657b6fb38d65afb3c0b345514a783de7a9feb4fab594fa0bacc2a0 +PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/7c/58/75f3765b0a3f86ef0b6e0b23d0503920936752ca6e0fc27efce7403b01bd PYTHON_BOTTLE_LICENSE = MIT PYTHON_BOTTLE_LICENSE_FILES = LICENSE PYTHON_BOTTLE_CPE_ID_VENDOR = bottlepy -- 2.34.1 From fontaine.fabrice at gmail.com Tue Oct 25 22:38:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 00:38:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: fix uclibc build Message-ID: <20221025223804.583594-1-fontaine.fabrice@gmail.com> Fix the following uclibc build failure raised since bump to version 5.43 in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: file.c: In function 'fname_print': file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given 605 | putc(c); | ^ Fixes: - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 Signed-off-by: Fabrice Fontaine --- ...ile.c-fix-build-without-wide-support.patch | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 package/file/0001-src-file.c-fix-build-without-wide-support.patch diff --git a/package/file/0001-src-file.c-fix-build-without-wide-support.patch b/package/file/0001-src-file.c-fix-build-without-wide-support.patch new file mode 100644 index 0000000000..29be9fa2cd --- /dev/null +++ b/package/file/0001-src-file.c-fix-build-without-wide-support.patch @@ -0,0 +1,39 @@ +From f2ab09d0e1388657f6b7e62bacc383ebea91f5b9 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Wed, 26 Oct 2022 00:23:32 +0200 +Subject: [PATCH] src/file.c: fix build without wide support + +Fix the following build failure without wide support (e.g. on uclibc) +raised since version 5.43 and +https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: + +file.c: In function 'fname_print': +file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given + 605 | putc(c); + | ^ + +Fixes: + - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 + +Signed-off-by: Fabrice Fontaine +[Upstream status: https://bugs.astron.com/view.php?id=398] +--- + src/file.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/file.c b/src/file.c +index f5f46524..1c23defc 100644 +--- a/src/file.c ++++ b/src/file.c +@@ -615,7 +615,7 @@ fname_print(const char *inname) + for (i = 0; i < n; i++) { + unsigned char c = CAST(unsigned char, inname[i]); + if (isprint(c)) { +- putc(c); ++ putc(c, stdout); + continue; + } + file_octal(c); +-- +2.35.1 + -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 26 01:40:52 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 19:40:52 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-greenlet: bump to version 1.1.3.post0 Message-ID: <20221026014052.587418-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-greenlet/python-greenlet.hash | 4 ++-- package/python-greenlet/python-greenlet.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-greenlet/python-greenlet.hash b/package/python-greenlet/python-greenlet.hash index c1870c886d..8e2a95b03e 100644 --- a/package/python-greenlet/python-greenlet.hash +++ b/package/python-greenlet/python-greenlet.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/greenlet/json -md5 f424fbd9afeed575dd2ba5f0ac66e30b greenlet-1.1.2.tar.gz -sha256 e30f5ea4ae2346e62cedde8794a56858a67b878dd79f7df76a0767e356b1744a greenlet-1.1.2.tar.gz +md5 b3e86eb9ab0908e6e3ef542e9b94d7e1 greenlet-1.1.3.post0.tar.gz +sha256 f5e09dc5c6e1796969fd4b775ea1417d70e49a5df29aaa8e5d10675d9e11872c greenlet-1.1.3.post0.tar.gz # Locally computed sha256 checksums sha256 769831d6e5dfaf2c20802faccff1fafb4c2025dd8f6253dfa47fcad59d4d0979 LICENSE sha256 e5ff3c23c110e494cd7d736c10fd96d462457bafeca310840db6527298c7d46b LICENSE.PSF diff --git a/package/python-greenlet/python-greenlet.mk b/package/python-greenlet/python-greenlet.mk index 72d2747970..b4a0e5af08 100644 --- a/package/python-greenlet/python-greenlet.mk +++ b/package/python-greenlet/python-greenlet.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_GREENLET_VERSION = 1.1.2 +PYTHON_GREENLET_VERSION = 1.1.3.post0 PYTHON_GREENLET_SOURCE = greenlet-$(PYTHON_GREENLET_VERSION).tar.gz -PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/0c/10/754e21b5bea89d0e73f99d60c83754df7cc64db74f47d98ab187669ce341 +PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/ea/37/e54ce453b298e890f59dba3db32461579328a07d5b65e3eabf80f971c099 PYTHON_GREENLET_SETUP_TYPE = setuptools PYTHON_GREENLET_LICENSE = MIT, PSF-2.0 PYTHON_GREENLET_LICENSE_FILES = LICENSE LICENSE.PSF -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 26 02:35:05 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 20:35:05 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-numpy: bump to version 1.23.4 Message-ID: <20221026023505.616591-1-james.hilliard1@gmail.com> License hash changed due to date update: https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 Signed-off-by: James Hilliard --- package/python-numpy/python-numpy.hash | 8 ++++---- package/python-numpy/python-numpy.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-numpy/python-numpy.hash b/package/python-numpy/python-numpy.hash index c0dcc5d27f..2a2dec44da 100644 --- a/package/python-numpy/python-numpy.hash +++ b/package/python-numpy/python-numpy.hash @@ -1,8 +1,8 @@ -# Copied from https://github.com/numpy/numpy/releases/tag/v1.21.2 -sha256 76af194fbc117934ec5bbe2ff15177adbd05aeed23f18ee209ed88edcd777e05 numpy-1.21.2.tar.gz +# Copied from https://github.com/numpy/numpy/releases/tag/v1.23.4 +sha256 ed2cc92af0efad20198638c69bb0fc2870a58dabfba6eb722c933b48556c686c numpy-1.23.4.tar.gz # License files, locally calculated -sha256 bc1b0af15cdc9415ea26c5f1df352c226ac86425ec0fb9ab38d111018bf1c6f2 LICENSE.txt -sha256 2be6947e0432ecf7950ee8fe38681316749dd06d1de17c9ec4de6d2f55adb3a1 numpy/core/src/multiarray/dragon4.c +sha256 0f88787955e7131224f53a8c3f3e859dc502408e3a539a4dcf61fb7888b5b984 LICENSE.txt +sha256 c27d0a8026bdb8876562b720ab24d1688e3827a89f6083cd6e7e8caa9584aba3 numpy/core/src/multiarray/dragon4.c sha256 fbc539f47d0cf83bc61378080fb873d5c14630126cacbfe754035c3926daa5ec numpy/core/include/numpy/libdivide/LICENSE.txt sha256 a14cc25e10d40a3aa705b7de2fb764a6535d8ee9b2db4e1724900585457dfd55 numpy/linalg/lapack_lite/LICENSE.txt sha256 badf51c7e3e7de9c7630bd069780f5c197b846ef7660b342a1e58d5553592d8e tools/npy_tempita/license.txt diff --git a/package/python-numpy/python-numpy.mk b/package/python-numpy/python-numpy.mk index 417fe81f57..4f4848c4ba 100644 --- a/package/python-numpy/python-numpy.mk +++ b/package/python-numpy/python-numpy.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_NUMPY_VERSION = 1.21.2 +PYTHON_NUMPY_VERSION = 1.23.4 PYTHON_NUMPY_SOURCE = numpy-$(PYTHON_NUMPY_VERSION).tar.gz PYTHON_NUMPY_SITE = https://github.com/numpy/numpy/releases/download/v$(PYTHON_NUMPY_VERSION) PYTHON_NUMPY_LICENSE = BSD-3-Clause, MIT, Zlib -- 2.34.1 From james.hilliard1 at gmail.com Wed Oct 26 03:11:57 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Tue, 25 Oct 2022 21:11:57 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pyzmq: bump to version 24.0.1 Message-ID: <20221026031157.658391-1-james.hilliard1@gmail.com> Migrate to setuptools infrastructure. Add new host-python-packaging dependency. Refresh zmq version override patch. Signed-off-by: James Hilliard --- ...-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++------ package/python-pyzmq/python-pyzmq.hash | 4 +- package/python-pyzmq/python-pyzmq.mk | 8 ++-- 3 files changed, 31 insertions(+), 18 deletions(-) rename package/python-pyzmq/{0001-use-buildroot-zmq-version-instead-of-detect.patch => 0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch} (55%) diff --git a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch similarity index 55% rename from package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch rename to package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch index 315c8c8bb2..18553582f4 100644 --- a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch +++ b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch @@ -1,4 +1,8 @@ -detect.py: fix the ZMQ version check to the ZMQ version of the buildroot +From 8eae1193457f72899f9cc2254ae1489026df9bb6 Mon Sep 17 00:00:00 2001 +From: Michael Rommel +Date: Sat, 10 Aug 2013 00:44:35 +0200 +Subject: [PATCH] detect.py: fix the ZMQ version check to the ZMQ version of + the buildroot The setup.py script tries to compile a test C program and runs it, to retrieve a version string for the installed ZMQ library, but if the cross @@ -17,38 +21,47 @@ Flandrin. Modified for version 18.0.2 by Asaf Kahlon +Modified for version 24.0.1 by James Hilliard + +Signed-off-by: Michael Rommel Signed-off-by: Lionel Flandrin Signed-off-by: Asaf Kahlon +Signed-off-by: James Hilliard --- buildutils/detect.py | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/buildutils/detect.py b/buildutils/detect.py -index d1380fe..4a91351 100644 +index 842e3b14..e2eca744 100644 --- a/buildutils/detect.py +++ b/buildutils/detect.py -@@ -120,13 +120,15 @@ def detect_zmq(basedir, compiler=None, **compiler_attrs): +@@ -120,18 +120,20 @@ def detect_zmq(basedir, compiler, **compiler_attrs): cc = get_compiler(compiler=compiler, **compiler_attrs) efile = test_compilation(cfile, compiler=cc, **compiler_attrs) - patch_lib_paths(efile, cc.library_dirs) + #patch_lib_paths(efile, cc.library_dirs) -- rc, so, se = get_output_error([efile]) + # add library dirs to %PATH% for windows + env = os.environ.copy() + if sys.platform.startswith("win"): + env["PATH"] = os.pathsep.join([env["PATH"]] + cc.library_dirs) + +- rc, so, se = get_output_error([efile], env=env) - if rc: -- msg = "Error running version detection script:\n%s\n%s" % (so,se) +- msg = f"Error running version detection script:\n{so}\n{se}" - logging.error(msg) -- raise IOError(msg) -+ #rc, so, se = get_output_error([efile]) -+ # if rc: -+ # msg = "Error running version detection script:\n%s\n%s" % (so,se) +- raise OSError(msg) ++ #rc, so, se = get_output_error([efile], env=env) ++ #if rc: ++ # msg = f"Error running version detection script:\n{so}\n{se}" + # logging.error(msg) -+ # raise IOError(msg) ++ # raise OSError(msg) + + so = "vers: ##ZEROMQ_VERSION##" - handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} + handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} -- -2.20.1 +2.34.1 diff --git a/package/python-pyzmq/python-pyzmq.hash b/package/python-pyzmq/python-pyzmq.hash index ecf6489249..efbc91d83c 100644 --- a/package/python-pyzmq/python-pyzmq.hash +++ b/package/python-pyzmq/python-pyzmq.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pyzmq/json -md5 200abc1a75bdcfff7adf61304f46f55e pyzmq-19.0.2.tar.gz -sha256 296540a065c8c21b26d63e3cea2d1d57902373b16e4256afe46422691903a438 pyzmq-19.0.2.tar.gz +md5 f10b7c3dee2c03557e2c5d00b73dfc7f pyzmq-24.0.1.tar.gz +sha256 216f5d7dbb67166759e59b0479bca82b8acf9bed6015b526b8eb10143fb08e77 pyzmq-24.0.1.tar.gz # Locally computed sha256 checksums sha256 aef3b80570351d44e29c22d080d4e9e106b34f3fdbc5cdf9636994474c72b1a2 COPYING.BSD sha256 44b23767df3c0fe27f88981f09bc7f50a1695cec4b24252fa5f55f03e76bcd6d COPYING.LESSER diff --git a/package/python-pyzmq/python-pyzmq.mk b/package/python-pyzmq/python-pyzmq.mk index d1f4314a1e..5792957eaf 100644 --- a/package/python-pyzmq/python-pyzmq.mk +++ b/package/python-pyzmq/python-pyzmq.mk @@ -4,14 +4,14 @@ # ################################################################################ -PYTHON_PYZMQ_VERSION = 19.0.2 +PYTHON_PYZMQ_VERSION = 24.0.1 PYTHON_PYZMQ_SOURCE = pyzmq-$(PYTHON_PYZMQ_VERSION).tar.gz -PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/05/77/7483975d84fe1fd24cc67881ba7810e0e7b3ee6c2a0e002a5d6703cca49b +PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/46/0d/b06cf99a64d4187632f4ac9ddf6be99cd35de06fe72d75140496a8e0eef5 PYTHON_PYZMQ_LICENSE = LGPL-3.0+, BSD-3-Clause, Apache-2.0 # Apache license only online: http://www.apache.org/licenses/LICENSE-2.0 PYTHON_PYZMQ_LICENSE_FILES = COPYING.LESSER COPYING.BSD -PYTHON_PYZMQ_DEPENDENCIES = zeromq -PYTHON_PYZMQ_SETUP_TYPE = distutils +PYTHON_PYZMQ_DEPENDENCIES = host-python-packaging zeromq +PYTHON_PYZMQ_SETUP_TYPE = setuptools PYTHON_PYZMQ_BUILD_OPTS = --zmq=$(STAGING_DIR)/usr # Due to issues with cross-compiling, hardcode to the zeromq in BR -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 26 05:35:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 05:35:53 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-25 Message-ID: <20221026053600.65F1940126@smtp2.osuosl.org> Hello, Autobuild statistics for 2022-10-25 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 6 | 0 | 0 | 6 | 2022.08.x | 16 | 14 | 0 | 30 | master | 111 | 272 | 11 | 394 | Classification of failures by reason for master ----------------------------------------------- host-bootgen-xilinx_v2022.2 | 16 libnss-3.84 | 16 crun-1.5 | 15 glibc-2.36-44-g2628500f5dff... | 15 host-f2fs-tools-1.15.0 | 14 libcodec2-1.0.5 | 14 sysvinit-2.99 | 11 brltty | 10 host-sentry-cli-1.59.0 | 9 systemd-250.4 | 9 linux-6.0.1 | 8 file-5.43 | 7 libarchive-3.6.1 | 7 libshout-2.4.6 | 6 host-binutils-2.38 | 5 igd2-for-linux-2.1 | 5 host-pahole-73383b3a39afe86... | 4 host-rust-1.64.0 | 4 unknown | 4 btrfs-progs-5.16.2 | 3 dahdi-linux-5c840cf43838e06... | 3 host-gcc-final-11.3.0 | 3 host-go-1.19.1 | 3 host-spirv-llvm-translator-... | 3 libcurl-7.84.0 | 3 libglib2-2.72.3 | 3 ulog-0389d243352255f6182326... | 3 xz-5.2.7 | 3 autofs-5.1.8 | 2 dash-0.5.11.5 | 2 freeradius-server-3.2.0 | 2 frr-8.3.1 | 2 gerbera-1.10.0 | 2 gobject-introspection-1.72.0 | 2 libpciaccess-0.17 | 2 linuxptp-3.1.1 | 2 musl-1.2.3 | 2 perl-5.34.1 | 2 procps-ng-3.3.17 | 2 pv-1.6.20 | 2 qemu-7.1.0 | 2 tealdeer-1.5.0 | 2 wolfssl-5.5.1 | 2 /home/buildroot/autobuild/i... | 1 a10disp-0.6.1 | 1 alsa-lib-1.2.7.2 | 1 apcupsd-3.14.14 | 1 batman-adv-2021.4 | 1 binutils-arc-2020.09-release | 1 botan-2.19.2 | 1 brltty-6.5 | 1 casync-4ad9bcb94bc83ff36cfc... | 1 dieharder-3.31.1 | 1 dmalloc-5.6.5 | 1 efivar-38 | 1 f2fs-tools-1.15.0 | 1 ffmpeg-4.4.3 | 1 fontconfig-2.13.1 | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 gensio-2.5.5 | 1 gmp-6.2.1 | 1 gobject-introspection | 1 google-breakpad-c85eb4a59b6... | 1 gsl-2.6 | 1 host-binutils-2.37 | 1 host-binutils-2.39 | 1 host-gcc-initial-12.2.0 | 1 jailhouse-0.12 | 1 json-c-0.16 | 1 libcap-ng-0.8.3 | 1 libdeflate-1.12 | 1 libgpg-error-1.45 | 1 libsigrok-0.5.2 | 1 linux-5.10.145-cip17 | 1 linux-5.10.145-cip17-rt7 | 1 mesa3d-22.1.6 | 1 mongodb-4.2.18 | 1 mtd-2.1.3 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 opus-1.3.1 | 1 python3-3.10.8 | 1 rauc-1.8 | 1 rtl8189es-39c17661136da48f8... | 1 syslinux-6.03 | 1 toolchain-external-codescap... | 1 uclibc-1.0.42 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- powerpc64 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ed4019939234b3dd4fe53779aedc2a7e6f08230a | arm | a10disp-0.6.1 | NOK | http://autobuild.buildroot.net/results/e03b40c043484c581e55117f443b91dc6bf808a2 | or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/4c60dec5f5eb7a772dc74d22bc59972a8a4da191 | arc | apcupsd-3.14.14 | NOK | http://autobuild.buildroot.net/results/e6acf63734cbd6293fd503da2f650f99ac35e3ed | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/5d62f1e24c3e10094e213ca5bc24dcf38f2c3783 | s390x | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/de844aa47ce720d07f23d606f471fd405ef41b18 | arm | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/169e5cfa8fdf7245ebb5c528d90c9a6385bb56bf | arceb | binutils-arc-2020.09-release | NOK | http://autobuild.buildroot.net/results/58a141b5f29742b51916de8e7c12f7c91ddcaae1 | aarch64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/3bf4e4a3e4bf8e2b7799cdaa79ede9179eba3849 | ORPH sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/2e47bb5ae3f8e89daa6bfe74f0881da2ea7820f7 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/f444f2d65b58c13518fd86e146c072ad4222842c | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/815423c263cd49ed674d18da3ab0e05d57222539 | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/86e4f11c40b8b05e8e3035fc4bf6d8496502c65d | aarch64_be | brltty | TIM | http://autobuild.buildroot.net/results/603a35ff94fd35cc402c533d9cc534f0bf95cb4d | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/44458b0699090e11b6718ac670a4e18688d5ecd3 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/8ff467826a647c1e72374e70cf6d8afd18d7d1b5 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/403e606631c4f7b3884b9b7334b16e580a28d451 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/c68b4ec80f458df7bd74ebc212655289eee2243e | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/ee6acfe358b038cf9ea385fdad0af027e3ea688d | mipsel | brltty-6.5 | NOK | http://autobuild.buildroot.net/results/086d55014e5d38b0a1f94b77fc2973ded73b557e | sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a03d5e244442a4ff89cae055b32f5776b4088324 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/c7828e07250efe4de9ad3d78069109c37697709d | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/a335453d4f074fc59b3e81253d41c8fa18e972f6 | ORPH aarch64_be | casync-4ad9bcb94bc83ff36cfc... | NOK | http://autobuild.buildroot.net/results/e9aee329712c71f206ab7b858b10cbaab285a65d | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f23031097bc23561b304a15778eb10720c1e3e55 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/113f4d0ae5dc83a025bbb14387c9ee98853af264 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/a52bfdd5e6c6241d2dcffbf225157ff207262f98 | mips | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3b60ec95bc2c313945eb2fcad47e263547b2e2ed | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8734087874330c6c9b01df977f09bdba0c55b779 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0379a05f4dd9fc9bd652ad10e22f94fbf80b6cbe | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20ef943c52b4d7a9d895f01d591de7351d70aa52 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/20624ae601cdc66cee5995abe180b4c039ef36a4 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/48b0e91b43494bf349343794079eec061cae0e36 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8166e44cc42a6f2d61d1d524299f34a3ec6b151e | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5e6a39f5a8d4e7a053e8c1ec83662d37f63b8503 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/45282a1ba0b098f2a32f7124d25653779afe5ed4 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/1a5a164ac13582c009c91f0bfec008f464b1c133 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b810478966037c2c461f73a87f8c2dbb58636b6a | armeb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/589eae62b1affeadcb4cbc482bd9ddba3812089d | arc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/e1f92d6a15dfe0d6c59eeab9b93e4ea2a91832bf | sparc | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/bbbe7c05ea70691f0eb71c7eb93862f63c9a248b | mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/f4dc801fe5b0d807fd07bac3e8e5ef41eab70e4f | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/1e6db487b9cdebecff8b64f8ee9b6c238b736a61 | ORPH microblazeel | dieharder-3.31.1 | NOK | http://autobuild.buildroot.net/results/5b4e450114f0c617092801b2e60af820c2f1d73e | powerpc | dmalloc-5.6.5 | NOK | http://autobuild.buildroot.net/results/702ff3704e4e69f46dd0155ce864e0783cbc652c | ORPH i686 | efivar-38 | NOK | http://autobuild.buildroot.net/results/18075baef542f49bb80e3bcad7988698c3306be3 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e270923ce72fce116b05c1d1e22e805dcd0d910 | s390x | ffmpeg-4.4.3 | NOK | http://autobuild.buildroot.net/results/65cf0430562a1f3b54f4856f9b04db060adb4451 | sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/cf77bfd6b256a66765732621440ff8959904635d | ORPH arc | file-5.43 | NOK | http://autobuild.buildroot.net/results/b4096390133b8cba9da31e2825531d0dec1d1d14 | ORPH mips64el | file-5.43 | NOK | http://autobuild.buildroot.net/results/1071f7f2a9fb365bbbb41943f3003c25d31f3e16 | ORPH arceb | file-5.43 | NOK | http://autobuild.buildroot.net/results/58dc2bcb479003fe27014c7484c0c1334d7a5319 | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/2233164e9edd8eb9275da6239871a374daf67323 | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/34cb3fff617704e64950c4a21d7702b339fffe6e | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/84c2d9d11e3ec7ac435109028ab3466e51ba3dca | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/ad3a933af6a1e3a0156fa8e5201104bcf5d060fd | ORPH mips64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/048bf652d3f79fe222fa646154ae2bec8d09db58 | aarch64 | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/b016384ef3b82cabd14172ca4793f404a0cf2426 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/107e737822a4177491059d6d4b9b2df6be887dd0 | mips64el | frr-8.3.1 | NOK | http://autobuild.buildroot.net/results/74fcf0ff2b5ba0b41bd5f929288220aa561f195a | x86_64 | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/4a1b0193df05c68e2ebce92d8f881283c3127cef | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/8c55309858770022a2ad76cf8f318bc9d6d24a79 | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9b018cf65284836aaec404e924355ec1161b202a | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/fe5d4f1ffc882353b9edfb89971965e424d461d8 | powerpc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/9388b004ddb46174c6bc7cdc461b3eab9380ee39 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ad21aa4b1da66a6bd939dfbf37534bd3a2fd0f94 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/eeacbc436cca77b63ca359968010baf3bbbf5def | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/a5fa66921aa84badab17c4266083567f9772f584 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/167ffe986a215c09a9cc5ca7375f26ec54985197 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8c5b8372bd2aac0053b7d6ed746fa26034a2bf6a | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/ffdafaee3af8e29aeef0253c7c98fbca62b5fb89 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1c634d445f93e0a7cea3979cecf9bbd4a07ff74 | mipsel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/3bb7a114bc96b06b49cabb9b0ff67dc9ad0d2ed9 | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/7c2b37ba8f5dced727016545520ecef2c7d2e646 | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/6c74c8a58a216293d41a4f0494035e6787f0a8f2 | arc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/4a62bf159e5bf7ba719ab8d6c5572e12683ad00f | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0a83b23f6b5f8fbedd32db4b529301ba69ccd52c | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/2416e484f1e8dbc40d7427fbe44f155ed4f4663b | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/faad2a692e763c75dcca3604429d008ab9cb312e | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5f2f6d689c5aa7ce891c634f0bb4313134495afb | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/ed794adf3c2617becbcb4609dfbd09f123611eea | ORPH armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/d01e1a88d6cbf91bc4b76ec346bd011c96c3b34f | microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8555602dac396651a5ba9e8a1710efc6dee29a8b | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/aa5eb499b86667c6e6e432d72761f8848fba36f7 | ORPH mipsel | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/9414b17146f6fd51ac8652f77c0abd8192eef01d | powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/31892826debb1d66d654e02d84281ee5b2219587 | ORPH or1k | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/346e32d76700672985ff28cae772d06d7f9bf74b | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/c1834e918bcb5093ad99e887d3532dc5d8757890 | sparc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/58a1a03231367a15537a9bb1b66c6bcd99a37351 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/789fbc0e9a8b337fad84d144baad69908829066a | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/df0a50faea0425e396b11d296ee83a0b24eb4485 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/2318556c0344441739d26c37445285ccd2a10b21 | i686 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/deefde9eefec07baf373550a2d3c534bd458b029 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/20f564c56145cd6b3e9b74c3a0010c04534b9027 | aarch64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/d82c1da61f41a7b2bbd12f7213c303b8146d77ef | arceb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/b9c8147bdc1ac287aa8736892facf9196809b730 | riscv32 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/25103af38fa24fb53455bb3742476ec1f6406c31 | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/4bf2cb23e00918e3fa35cc08897f17d8d5d47eec | arc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/72410364c8af83ab695d20ab79e0190b3c7888f6 | xtensa | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/587711f411b4029c59153528d5fc1fa284b09c36 | microblaze | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/ec78dd52ab988afc2f3405dc67ed667b4745b5c3 | mips64 | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3d62cade51b67a674e2c8421fb3cdb45cefd7fad | aarch64_be | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/3a8b66027cde3cdd9d02745381526d52bb626a78 | or1k | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/15ee18e1347bb090dabb91aef10117f7da1fd88c | sparc | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/7ea9485e22042c774e9f48ee9a19a287ace9f31b | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/638b917b5efe5f85a82c067178ec1f03905c1524 | armeb | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/19af48316d0f03528838394848e98c9ac92c1a72 | arm | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/898e731396cde987d8e457bb8f1c1c11c9c1a73b | powerpc64le | host-bootgen-xilinx_v2022.2 | NOK | http://autobuild.buildroot.net/results/57708223585baee2b0a28cfb7256c8bd1046e8ec | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6833fd6ca0ebef791ed9e8465fdb07cb6f6d48ee | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/df1c51b49e08458974e7bb3cd98240dd34041fa8 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5867c3f970d59f1436f48438d6f091403916abbb | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3c5acc12455ae710c202aafaf02066edb8fc796 | sh4a | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/123cb15a84cbf061195f87dc562159fb80ce188f | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/41c626cb473b9d7e04fecab0d1cc3a4b18e47693 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5cf06c73cea1db6e3acc56b12a019c8d460abad5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2ecb1f3f1dfc3151738bf2f13fbc06ed1756ce33 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a364d59831ff9e930ae5d8d5e028ba3783b1acff | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/e592f7de2bcc4b5c73103009a54b8b5721664555 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/62cf41cf5825161c992aec97df38a1fdfe24a5cf | microblaze | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/71d88ea6d163a244effdafccf42b7c13504789b3 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6d0d63d4b7788a16aacfd2490202db667439a9a8 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/89cf1645f9777e5ba0b986b98c21e4858acee8e4 | aarch64_be | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/17501a2526b485cf8b4129fcecf06e9f330f4cf4 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/723183f354ff65cea41b860d96649dea02ee92e6 | aarch64 | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a | i686 | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279 | mips64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/0954eddb5c65f80c948e32bcc7aa290edf147130 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/92649ba56560332ab65e554b32253f89a7226b1b | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/e53df1cf298e691105caf4f48a48b13d5d2717da | sparc | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/da885647912398a223369b413f19996861daede0 | mips64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/f79347039fcda74d894257a6f8087ea0b32ff4f9 | s390x | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/833856008f3ce6ac28c92437264e989687f1cdb4 | riscv64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/4b0ecf5800a07e4a87b697b2c939ae0e9753f3f2 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0b2f52a84a73455e031791cd88dd25b82a3f16ce | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bb79f3cd4232c1f3f4aaedd1fb8756fa69f0f395 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/bf3ecf23435bd4d686d85ca0c524645c82317440 | mips | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/0eaea2489da7a769263938f07dc4789f5af3add1 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/68cd593b796a8cb35b351bd1b6d203456eb9250d | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4fa6f631e7eb53102bbd2308b62c8fdbdc37a6b7 | arceb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d1ef488625827e4fbf3fca7776e85787bb47bf93 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b1867909d1e750e4cd58fc1cb100d0f400450e4 | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/46c597cd8d749ab1b905b49a7d2e02cb9eaa00bd | armeb | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/77319c40ad5443931d44eaf17417116fc6009c39 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/79e0809e05c65c3dbd338437e2b6151a26ff60b3 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5a2d886666a98784a56c1f50c4bb10e52d146f4e | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/74f254df3fdd3e377dce57d5075b57b561a4f31a | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/c32fb504180aa9e945415a1434c391a8bb176366 | ORPH arm | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/a986effee48b9f3c0cd5088f2ef614fdbd43eec7 | ORPH riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/d464b39ffdfc9f002eb466fc566946ec11b89434 | ORPH sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/3a3571bdf4e930b5e3c687e863191b69fffcbac9 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/dd238e6285ed767debfbd9b978bfd68bed4993a4 | aarch64_be | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/91a5c464d440c36e1e1bdef8e8ee8f78e6721a4a | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/960d9474d36412520f4eeab53cd9a286d804a011 | mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/49d863ce5114e114549655bddbb4d2af64c3c447 | x86_64 | jailhouse-0.12 | NOK | http://autobuild.buildroot.net/results/d3d004570d9707efaf6e1193ed5320db8e3b0933 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/a8e2c2bbae59b566621bc0020b28f669beacce61 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/b7649f58bc186a77d81c970b3052adb1193ff79e | mips | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/8d17f470883f3f380f666a0bcd30e754387fdc52 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/528d651842077938a81c4187ca46f61835f4bdee | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/64c19986cca7b7943c114492ee7ca36bb9dd0c96 | mipsel | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/82ff22ba728f1ec24c58ba20a46bde3432a98764 | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/cc17d2bb5f0d25e31cace1e6e0f26e04ea49a431 | riscv64 | libcap-ng-0.8.3 | NOK | http://autobuild.buildroot.net/results/72765a30f117c00e029142189616449368f7fec4 | sparc | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/2d018aa2c071b0e7216dad28132cfd2b303f00c1 | xtensa | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/76bee4244fe00cbb8bf79e9af30cf4a3ec3bf949 | sh4eb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/33bb7bada67ee0ea464ce4377d421edcafefbdfb | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/499db221b13aecf8a076b2495fa77135640f5ec3 | mips | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/21b587f3dd3ecd720e73ef76208857aa09a2a2c1 | arceb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/7383b082c95215170fd0f27d00f95ea190224256 | arm | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/94c8eb7c4d08149c61982ba62b2cb1c9951e2714 | x86_64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/876bc2d53dbe8960d764f42db2a957046d8378d6 | armeb | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/42b78404af8df32cc1f0bf18d03eb2c71e427efc | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/30f3b320f1e39b55f3dc7e4271e63bcc3ea8c689 | powerpc64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/a74e035c5db7f026df0cefbe21c1d906d5b1e6c9 | aarch64 | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/4fec694be19772987448b1ec5c133c00a2dc2797 | microblaze | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3c10602905920197455b2c9c7e5ae435f72e4590 | mips | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/2a284cb7f68b2d0bd992020babe1490b0007672b | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/ec7106fef04f9e041642753f147769324291246a | riscv64 | libcurl-7.84.0 | NOK | http://autobuild.buildroot.net/results/29dd27a9bc07c763a4969dcd998688e51b127f2a | aarch64 | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/7b175ba0149a2ba09df9faf33fac4d4d3c65fdcd | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/dde4b7b3847d8c238c3cf86c44b69da97c4e8ce2 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/d6401d9aeb1774b2a499b2c06a9ae9fe17a5899c | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/28cfef22fced8becc91c2bfa7f4147fd94542ba8 | aarch64_be | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/6d04acec2457d08ee27592b357e9539c4750d47f | ORPH s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/2977cd5f41ebf3ee4eba3b630a9626663ed8226a | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0300400b7773004db129f515bb2d67443085998c | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c21264deafe7068997dc17f83cee7f073c1ac407 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/0a42e53e814e5d4eb3df57f0eb120513333db313 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/066562d0b986f6db5467fc4b664febcbc55376d7 | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3e0eaed94f8a33f64a9b743ae42509deb0d69248 | sh4eb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5cd4ea0b3889695dec2346faf68505cb8ef2bbc1 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6e542771f43e2776e54ada02dccd5ab65f0af297 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/89833d93f30a77cafc6a21a50b5be0d27dec4262 | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e4310463b981bca936b469c058cb9416207274f8 | sh4a | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/96d2ed98fa9c7f9fce9a247ca779ec1b82b00e85 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/18c7a1634d27284ca79f3d2fa74b1c637ac92412 | mipsel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5741af8359a98619cdb9d60d4a6f2c6222cd7f8f | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/985e97d1b52eba06a4bca08e1c28f5859a439b2c | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/60cecd4242430beb03992af3b6639973958e422a | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/55c98518b0a6c98f86c557eedb814f346d55e2ef | sparc | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/253448b55eec64966a739fe110473ee869308e3a | xtensa | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/d41509feaa889979668fa5105ca1defca71567a6 | powerpc64le | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/84e65414f445d414d0d6a51f51fccaa1ef61f2a4 | ORPH arm | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/d897ab02cd28ff033ca259e95e960ad61f2a9345 | ORPH mips | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/2337975f71759d637691c9daf7d9f3b9216da2f7 | ORPH armeb | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/aa0efb3a5d9402b8dd4ce59ee12e22b8aa26cb42 | ORPH mips64 | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/d706b066554681c2c965dab5babb3649bf568266 | ORPH mipsel | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/f137201cf1f2fd5d5e5e64152bc2fcc73f344a61 | ORPH arc | libsigrok-0.5.2 | NOK | http://autobuild.buildroot.net/results/ce81c4d3fcb941a8efb0f0fca62ababa9d36bb88 | armeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/de47c3954c53ec51cb46349f35e69427d0dfe0a8 | ORPH aarch64 | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/28a8c9c01eb32ea4bc0524f6c7a4b79cf9ddf8a7 | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1d4866d20960667ccc3eed399838ef5a740e5058 | ORPH x86_64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7605a619b0ee21f6905393922c3eaa35af28bef0 | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/8380f86b05c5855cb526fa77053cf3c63089e7ca | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/d86fcc25709a42b0698832d55056bfd436b2a7a8 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/4b3a638abd44362584d7ca4aff427bcc49fff24c | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/5aa14c86e2b90e31debb46e5c95e3b165d7ccc78 | ORPH aarch64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b5f32b29873a7a4864c886004474f750bb4736fb | ORPH sh4 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6c1c18eb968e11cf43beb10eea89762e7172f588 | ORPH armeb | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/cd88c3538548c3cc0fd28438e23e58b98ac7f280 | arc | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/438b8ff17e335a430148ba1df95e11a8db618ea9 | arm | mesa3d-22.1.6 | NOK | http://autobuild.buildroot.net/results/00b9e2b49bbd519265065cf91c3c103ae8bbed75 | aarch64 | mongodb-4.2.18 | NOK | http://autobuild.buildroot.net/results/9dcad8d3faee19045627b740f93ef4ff845f3194 | or1k | mtd-2.1.3 | NOK | http://autobuild.buildroot.net/results/e88613ec43ea5e945275c76da5515e175fc69460 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/3dc9a59ef5c8a867962c657c78a5b3ca3fe068d6 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/d1bbc7f2e5b2a2cde0a8bca81a4e29f37346f156 | arceb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/0c52b3b91edf1032d5cd3313c9dd9aab700936db | x86_64 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/1d46bffbe93d30f5ebfc735a281bc8c2f7f8b4ae | ORPH arm | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/fe8a78e5d87056600a84ffe1e9fb66bdeac50e10 | armeb | opus-1.3.1 | NOK | http://autobuild.buildroot.net/results/19121f049b9f0d1e71512bcb9cee51b5928a38a0 | ORPH armeb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/37114d380eaf223ba5df008e8f1b5bb99ddfeec0 | sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/e69e9c99693a4eff3e2105380631be397c13dd86 | powerpc64le | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/1977a3bf24f28736f569e6fe6728cb981527c31f | ORPH aarch64_be | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/dd10cc00451038e75365a3df9c119a8ad039ba99 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/5e4a35fd5ffa5a75326d9afd4f56ee926182a1f7 | ORPH armeb | pv-1.6.20 | NOK | http://autobuild.buildroot.net/results/cb1983ed30a3dd4f27322c500834da240f2361f2 | ORPH x86_64 | python3-3.10.8 | NOK | http://autobuild.buildroot.net/results/7ce0f2c0e71271bd10646587fa36831344ff3a9d | mips | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/ab7b7a721fedb2ed48d4021a803b51ca541f70a3 | riscv32 | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/37e49f39c5b409da63c8d938d1c0e99642b36306 | or1k | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/390f3af816da1ce50ec23e7762848254514c5371 | s390x | rtl8189es-39c17661136da48f8... | NOK | http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce | x86_64 | syslinux-6.03 | NOK | http://autobuild.buildroot.net/results/44b7eacc00c5129b6304b0f5d838351c866cb69c | ORPH mipsel | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2df61d462f758b91def0bc202b041f3c91ba99b9 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/e9b4d38fb1ff348350dd736cc16338be5408d02f | i686 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/079ad8b99220acfff0ee046e9b2de24214c02156 | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/69f5d25ae560648dbe985f2622c84a1ad5260e08 | sh4a | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/5cb591d7c6484eed3414864c6d3ec234fa7f14ed | aarch64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/2b4b99068337a8c39c43fdc4c588b7069eae3848 | aarch64_be | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/6af693e1e849906f7c82b57ed3b5528ab186b285 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/bacb535c23fad6f2ae7682a109fbd482aebd8112 | nios2 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f397642867b1c838fc00c69e6b260504cc9936c9 | s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/a33ba8f9511260e6591257c78afc2982eb4bc97c | ORPH s390x | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/927fc73d148f8449d5ddf07e069a6fe185fbfaa3 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/455bc800cb2a1ea6f63f435f5b62f32daa3ddb6b | ORPH arm | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3d34294aa011c029958cc92ed14725e8dfe73154 | ORPH sh4 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/5646113b89ba2360162df5dd827de99dad2652cb | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/70a67823b800fb58247d1e65e46280a081815fdf | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/4930bee86b85fad2fb5cdcf4fc9e996bf0ada7bf | ORPH microblazeel | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/3c55f27e92c1672ca892696fd109fd46aeaad372 | ORPH or1k | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/01a36d660d3d00b67c87f10d306415c024dd3e19 | ORPH mips64el | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/2eab3a2658de10243362090aba0ce53add5692f0 | ORPH sparc64 | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/ba0dbd91a5f0b0d464196340070e7a5eee88c3ab | powerpc64le | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/9b0e6cf96d499c47a5c6b16704a62a7c1f765bfc | mipsel | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/a72d86ac87be512241793122a90bdd980a6b26cf | ORPH powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/5a9b70a61a15126b9ee7486a9182458b12a4c21a | aarch64 | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/bb861d6833fa6670812c2774b8eea8a51a523810 | sparc | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/7047627ac8cf09ef36093e338fc6a497e7804ec8 | powerpc64le | ulog-0389d243352255f6182326... | NOK | http://autobuild.buildroot.net/results/a5b19154acc61ff2845da2264c9e976cf885a079 | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/5983a813e777978e0c86ddf4cbb220ebf7b29645 | arc | unknown | NOK | http://autobuild.buildroot.net/results/b3d3a023d52983e952c480b5e784222c7da97789 | nios2 | unknown | NOK | http://autobuild.buildroot.net/results/fb1804ee32ef3232cfc7c16d8f8c51e47f2e56e3 | xtensa | unknown | NOK | http://autobuild.buildroot.net/results/4e92e6af2acdb5ba520ff575a02997a2384610b7 | armeb | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/ef3b188b42df8dc67358887eec966e1aeb72c283 | mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/d6429a1e4b0c1ee9fbd5dc03a97617aef51cd53a | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bd1e7ebe0aafe8e8b1bde48db3e37616f60bc122 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bceb29111de25f5e08bb757201d087252ba52ce9 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/4c2190026461156c3dd0c4bdb3f5a75499f0898b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/f5e62a046d47d856c89255964c4f27ae796913f1 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 gummiboot-2bcd919c681c952eb... | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 libgcrypt-1.10.1 | 1 libmdbx-0.11.12 | 1 libphidget-2.1.9.20190409 | 1 libselinux-3.3 | 1 linux-5.17.15 | 1 rtl8723bu-d79a676a8d3f0bb6a... | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- microblaze | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/678759e312c41f125801624eaeb9b3e67da3c4a3 | s390x | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/874b7b27b5a247c7b6ac35533da9543065f81a46 | mipsel | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/30b548f4f46c16203d8ba6af405ac163f5965952 | i586 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/05711691cc8848bd056323bb6a2967130899d810 | x86_64 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/3243e5634fe4f898e48e0cfb2d30319e22458120 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/7ad2d242f0b8e92a50022d449c2af5e6f55f219a | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/4a8078b084565f3ecbfa0588fb0ace92e215e790 | aarch64 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/689671a4582a803b5a065a09514342a136b647dc | ORPH i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/45b3af6d9389695827adf8b61383744b12f3e220 | ORPH microblazeel | libmdbx-0.11.12 | NOK | http://autobuild.buildroot.net/results/08c43b1e1ce75fda2f3c46fa945b0c60cfe710cd | or1k | libphidget-2.1.9.20190409 | NOK | http://autobuild.buildroot.net/results/a8612967d69fbab11c27b0cacbd18904bea3cbac | or1k | libselinux-3.3 | NOK | http://autobuild.buildroot.net/results/b0b426765e168e56ee004be973fa48436d1ad3cd | arceb | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/b5fdf50afac521b763853df8288db7d2b8a2b798 | ORPH xtensa | rtl8723bu-d79a676a8d3f0bb6a... | NOK | http://autobuild.buildroot.net/results/01994ae49a606a700c6fbb6eb09a8dc97ffe53d5 | -- http://autobuild.buildroot.net From romain.naour at smile.fr Wed Oct 26 08:48:14 2022 From: romain.naour at smile.fr (Romain Naour) Date: Wed, 26 Oct 2022 10:48:14 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: Hello Thomas, Le 25/10/2022 ? 22:13, Thomas Petazzoni via buildroot a ?crit?: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. It seems glibc 2.36 was not used last time the toolchain-builder was used (indeed it was glibc 2.35-134...) Maybe building all qemu defconfig would trigger the issue since now glibc is used by default. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. Anyway, our toolchain testing with toolchain-builder or qemu defconfig would not dectect such issue. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 Reviewed-by: Romain Naour Best regards, Romain > > Signed-off-by: Thomas Petazzoni > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > From peter at korsgaard.com Wed Oct 26 08:53:42 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:53:42 +0200 Subject: [Buildroot] [PATCH] package/squid: security bump to version 5.7 In-Reply-To: <20221018082548.1987175-1-peter@korsgaard.com> (Peter Korsgaard's message of "Tue, 18 Oct 2022 10:25:48 +0200") References: <20221018082548.1987175-1-peter@korsgaard.com> Message-ID: <874jvr0xux.fsf@dell.be.48ers.dk> >>>>> "Peter" == Peter Korsgaard writes: > Fixes the following security issues: > - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager > https://www.openwall.com/lists/oss-security/2022/09/23/1 > - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication > https://www.openwall.com/lists/oss-security/2022/09/23/2 > Signed-off-by: Peter Korsgaard Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:54:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:54:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/imagemagick: security bump to version 7.1.0-51 In-Reply-To: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 20:23:34 +0200") References: <20221019182334.2280837-1-fontaine.fabrice@gmail.com> Message-ID: <87y1t3yngw.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Fix CVE-2022-3213: A heap buffer overflow issue was found in > ImageMagick. When an application processes a malformed TIFF file, it > could lead to undefined behavior or a crash causing a denial of > service. > https://github.com/ImageMagick/Website/blob/main/ChangeLog.md > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:54:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:54:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/poppler: security bump to version 22.10.0 In-Reply-To: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 22:00:51 +0200") References: <20221019200051.2690977-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3ryngj.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an > integer overflow in the JBIG2 decoder > (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a > specially crafted PDF file or JBIG2 image could lead to a crash or the > execution of arbitrary code. This is similar to the vulnerability > described by CVE-2022-38171 in Xpdf. > - Drop patch (already in version) > https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:52:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:52:54 +0200 Subject: [Buildroot] [git commit] package/imagemagick: security bump to version 7.1.0-51 Message-ID: <20221026085456.37545870E5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c5b1a0b34a02759ab4ac3a28b01fe50c1b9d2ff2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix CVE-2022-3213: A heap buffer overflow issue was found in ImageMagick. When an application processes a malformed TIFF file, it could lead to undefined behavior or a crash causing a denial of service. https://github.com/ImageMagick/Website/blob/main/ChangeLog.md Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/imagemagick/imagemagick.hash | 2 +- package/imagemagick/imagemagick.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/imagemagick/imagemagick.hash b/package/imagemagick/imagemagick.hash index ff0f3e26c6..8988dad5da 100644 --- a/package/imagemagick/imagemagick.hash +++ b/package/imagemagick/imagemagick.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3df6ca6dff15a4e8a20b4593c60285a59e38890440494d91a344e5c0e2bb3eec imagemagick-7.1.0-45.tar.gz +sha256 4333ef2fe63f2510988af82b726f5b1919ebd54037ea6674566c69fcceb67e11 imagemagick-7.1.0-51.tar.gz sha256 8cceeb67d4e783cb63075c7311fdb990fa0369ee80fbd0f481064cd02386ca2d LICENSE diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk index 893606ff01..6bdf24c1e8 100644 --- a/package/imagemagick/imagemagick.mk +++ b/package/imagemagick/imagemagick.mk @@ -4,7 +4,7 @@ # ################################################################################ -IMAGEMAGICK_VERSION = 7.1.0-45 +IMAGEMAGICK_VERSION = 7.1.0-51 IMAGEMAGICK_SITE = $(call github,ImageMagick,ImageMagick,$(IMAGEMAGICK_VERSION)) IMAGEMAGICK_LICENSE = Apache-2.0 IMAGEMAGICK_LICENSE_FILES = LICENSE From peter at korsgaard.com Wed Oct 26 08:53:58 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:53:58 +0200 Subject: [Buildroot] [git commit] package/poppler: security bump to version 22.10.0 Message-ID: <20221026085456.45DB3870E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd35c0f363c3192d70b111baba14b40370a206d7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an integer overflow in the JBIG2 decoder (JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a specially crafted PDF file or JBIG2 image could lead to a crash or the execution of arbitrary code. This is similar to the vulnerability described by CVE-2022-38171 in Xpdf. - Drop patch (already in version) https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- ...tjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch | 27 ---------------------- package/poppler/poppler.hash | 2 +- package/poppler/poppler.mk | 2 +- 3 files changed, 2 insertions(+), 29 deletions(-) diff --git a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch b/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch deleted file mode 100644 index 40af6a2e00..0000000000 --- a/package/poppler/0001-Include-setjmp-h-when-WITH_JPEG-yes-and-WITH_PNG-no.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3ea6bca90d87d3f91556205c4e58ca425c6ac437 Mon Sep 17 00:00:00 2001 -From: Marco Genasci -Date: Sun, 12 Dec 2021 10:23:37 +0100 -Subject: [PATCH] Include setjmp.h when WITH_JPEG=yes and WITH_PNG=no - -[Retrieved from: -https://gitlab.freedesktop.org/poppler/poppler/-/commit/3ea6bca90d87d3f91556205c4e58ca425c6ac437] -Signed-off-by: Fabrice Fontaine ---- - poppler/ImageEmbeddingUtils.cc | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/poppler/ImageEmbeddingUtils.cc b/poppler/ImageEmbeddingUtils.cc -index 5c50f1269..c26b9eb2a 100644 ---- a/poppler/ImageEmbeddingUtils.cc -+++ b/poppler/ImageEmbeddingUtils.cc -@@ -16,6 +16,7 @@ - extern "C" { - # include - } -+# include - #endif - #ifdef ENABLE_LIBPNG - # include --- -GitLab - diff --git a/package/poppler/poppler.hash b/package/poppler/poppler.hash index cf6c537063..93681e04af 100644 --- a/package/poppler/poppler.hash +++ b/package/poppler/poppler.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 acb840c2c1ec07d07e53c57c4b3a1ff3e3ee2d888d44e1e9f2f01aaf16814de7 poppler-21.12.0.tar.xz +sha256 04e40fad924a6de62e63017a6fd4c04696c1f526dedc2ba5ef275cedf646292a poppler-22.10.0.tar.xz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/poppler/poppler.mk b/package/poppler/poppler.mk index b54262e7c4..02ccf742ac 100644 --- a/package/poppler/poppler.mk +++ b/package/poppler/poppler.mk @@ -4,7 +4,7 @@ # ################################################################################ -POPPLER_VERSION = 21.12.0 +POPPLER_VERSION = 22.10.0 POPPLER_SOURCE = poppler-$(POPPLER_VERSION).tar.xz POPPLER_SITE = https://poppler.freedesktop.org POPPLER_DEPENDENCIES = fontconfig host-pkgconf From peter at korsgaard.com Wed Oct 26 08:52:08 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:52:08 +0200 Subject: [Buildroot] [git commit] package/squid: security bump to version 5.7 Message-ID: <20221026085456.2B8A4870E4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e6c9a95a34eec997168780d9049560f26cfaeb60 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes the following security issues: - CVE-2022-41317: Exposure of Sensitive Information in Cache Manager https://www.openwall.com/lists/oss-security/2022/09/23/1 - CVE-2022-41318: Buffer Over Read in SSPI and SMB Authentication https://www.openwall.com/lists/oss-security/2022/09/23/2 Signed-off-by: Peter Korsgaard --- package/squid/squid.hash | 8 ++++---- package/squid/squid.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/squid/squid.hash b/package/squid/squid.hash index 22c6db8c70..b00d14011e 100644 --- a/package/squid/squid.hash +++ b/package/squid/squid.hash @@ -1,6 +1,6 @@ -# From http://www.squid-cache.org/Versions/v5/squid-5.6.tar.xz.asc -md5 2f2201a18a0a727ab589d951ebe4f815 squid-5.6.tar.xz -sha1 a01f47b3e9ff06245c894773de30bfd88ab14f65 squid-5.6.tar.xz +# From http://www.squid-cache.org/Versions/v5/squid-5.7.tar.xz.asc +md5 7a3764a3c5833631a779d7827901cda7 squid-5.7.tar.xz +sha1 141e8007d6b1cfee34654127a9ca025125b37b58 squid-5.7.tar.xz # Locally calculated -sha256 38d27338a347597ce0e93d0c3be6e5f66b6750417c474ca87ee0d61bb6d148db squid-5.6.tar.xz +sha256 6b0753aaba4c9c4efd333e67124caecf7ad6cc2d38581f19d2f0321f5b7ecd81 squid-5.7.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/squid/squid.mk b/package/squid/squid.mk index 86a0c714c6..355af0b902 100644 --- a/package/squid/squid.mk +++ b/package/squid/squid.mk @@ -4,7 +4,7 @@ # ################################################################################ -SQUID_VERSION = 5.6 +SQUID_VERSION = 5.7 SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz SQUID_SITE = http://www.squid-cache.org/Versions/v5 SQUID_LICENSE = GPL-2.0+ From peter at korsgaard.com Wed Oct 26 08:55:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:55:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/acpid: bump to version 2.0.34 In-Reply-To: <20221019215201.21248-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Wed, 19 Oct 2022 23:52:01 +0200") References: <20221019215201.21248-1-fontaine.fabrice@gmail.com> Message-ID: <87pmefyner.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Drop second patch (source code was merged with > https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 > and moved with > https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) > https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Wed Oct 26 08:55:11 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Wed, 26 Oct 2022 10:55:11 +0200 Subject: [Buildroot] [git commit] package/acpid: bump to version 2.0.34 Message-ID: <20221026085650.F0545870EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7983d366849527f7de3478e7dcda7cc1a0ba2e1c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop second patch (source code was merged with https://sourceforge.net/p/acpid2/code/ci/d0a058548d66fca8ae69438cd73ba8b00b6315b3 and moved with https://sourceforge.net/p/acpid2/code/ci/5ec0bfe959b5e04f2af814b7377c34635fd86f6d) https://sourceforge.net/p/acpid2/code/ci/2.0.34/tree/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/acpid/0002-add-missing-defines.patch | 40 ---------------------------- package/acpid/acpid.hash | 6 ++--- package/acpid/acpid.mk | 2 +- 3 files changed, 4 insertions(+), 44 deletions(-) diff --git a/package/acpid/0002-add-missing-defines.patch b/package/acpid/0002-add-missing-defines.patch deleted file mode 100644 index a85315911f..0000000000 --- a/package/acpid/0002-add-missing-defines.patch +++ /dev/null @@ -1,40 +0,0 @@ -Add missing MSG_CMSG_CLOEXEC - -Unpatched uClibc toolchains, even using the latest 0.9.33.2, do not -have the MSG_CMSG_CLOEXEC definition. Even though the Buildroot -internal toolchain backend has a uClibc patch to provide it, it -doesn't apply to external toolchains. This patch provides the -definition of MSG_CMSG_CLOEXEC. - -Signed-off-by: Thomas Petazzoni - -Index: b/libnetlink.h -=================================================================== ---- a/libnetlink.h -+++ b/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; -Index: b/kacpimon/libnetlink.h -=================================================================== ---- a/kacpimon/libnetlink.h -+++ b/kacpimon/libnetlink.h -@@ -7,6 +7,10 @@ - #include - #include - -+#ifndef MSG_CMSG_CLOEXEC -+#define MSG_CMSG_CLOEXEC 0x40000000 -+#endif -+ - struct rtnl_handle - { - int fd; diff --git a/package/acpid/acpid.hash b/package/acpid/acpid.hash index d5e5bcc14b..8da0101264 100644 --- a/package/acpid/acpid.hash +++ b/package/acpid/acpid.hash @@ -1,7 +1,7 @@ # From https://sourceforge.net/projects/acpid2/files/ -md5 b2f2ca633b30ae893c47981fa4d3b258 acpid-2.0.33.tar.xz -sha1 b3e06c3f2213db8ee1a9024cf372fb30e2fab637 acpid-2.0.33.tar.xz +md5 988c2e3fd5ba0ea4492d3ba7273af295 acpid-2.0.34.tar.xz +sha1 9322112027e4aa5a8d1b97ec64ef1d150ff0f4fc acpid-2.0.34.tar.xz # Locally computed -sha256 0856f71b3eb34a1b663d0a8e6363dfcbc519e63d847330498898658e2972dbe8 acpid-2.0.33.tar.xz +sha256 2d095c8cfcbc847caec746d62cdc8d0bff1ec1bc72ef7c674c721e04da6ab333 acpid-2.0.34.tar.xz sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/acpid/acpid.mk b/package/acpid/acpid.mk index 5d5138baa3..4bd93068ad 100644 --- a/package/acpid/acpid.mk +++ b/package/acpid/acpid.mk @@ -4,7 +4,7 @@ # ################################################################################ -ACPID_VERSION = 2.0.33 +ACPID_VERSION = 2.0.34 ACPID_SOURCE = acpid-$(ACPID_VERSION).tar.xz ACPID_SITE = http://downloads.sourceforge.net/project/acpid2 ACPID_LICENSE = GPL-2.0+ From arnout at mind.be Wed Oct 26 09:49:59 2022 From: arnout at mind.be (Arnout Vandecappelle) Date: Wed, 26 Oct 2022 11:49:59 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: On 25/10/2022 22:13, Thomas Petazzoni via buildroot wrote: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 > > Signed-off-by: Thomas Petazzoni Acked-by: Arnout Vandecappelle (Essensium/Mind) Regards, Arnout > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > > diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..8614537794 > --- /dev/null > +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 034e15d9985..3ff87812036 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index f58e7771e1c..71bd717c233 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3114,7 +3114,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + > diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..4e93f6ab96 > --- /dev/null > +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 5b23a8b640d..404b420f302 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index 066bef99162..b7ad6982e96 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3154,7 +3154,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + > diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > new file mode 100644 > index 0000000000..8b6be49e68 > --- /dev/null > +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > @@ -0,0 +1,124 @@ > +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 > +From: Xi Ruoyao > +Date: Mon, 28 Jun 2021 13:54:58 +0800 > +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) > + [PR91085] > + > +fixincludes/ > + > + PR other/91085 > + * fixfixes.c (check_has_inc): New static function. > + (machine_name_fix): Don't replace header names in > + __has_include(...). > + * inclhack.def (machine_name): Adjust test. > + * tests/base/testing.h: Update. > + > +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d > +Signed-off-by: Thomas Petazzoni > +--- > + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- > + fixincludes/inclhack.def | 3 ++- > + fixincludes/tests/base/testing.h | 2 +- > + 3 files changed, 46 insertions(+), 4 deletions(-) > + > +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c > +index 034e15d9985..3ff87812036 100644 > +--- a/fixincludes/fixfixes.c > ++++ b/fixincludes/fixfixes.c > +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) > + fputs (text, stdout); > + } > + > ++/* Check if the pattern at pos is actually in a "__has_include(...)" > ++ directive. Return the pointer to the ')' of this > ++ "__has_include(...)" if it is, NULL otherwise. */ > ++static const char * > ++check_has_inc (const char *begin, const char *pos, const char *end) > ++{ > ++ static const char has_inc[] = "__has_include"; > ++ const size_t has_inc_len = sizeof (has_inc) - 1; > ++ const char *p; > ++ > ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); > ++ p != NULL; > ++ p = memmem (p, pos - p, has_inc, has_inc_len)) > ++ { > ++ p += has_inc_len; > ++ while (p < end && ISSPACE (*p)) > ++ p++; > ++ > ++ /* "__has_include" may appear as "defined(__has_include)", > ++ search for the next appearance then. */ > ++ if (*p != '(') > ++ continue; > ++ > ++ /* To avoid too much complexity, just hope there is never a > ++ ')' in a header name. */ > ++ p = memchr (p, ')', end - p); > ++ if (p == NULL || p > pos) > ++ return p; > ++ } > ++ > ++ return NULL; > ++} > ++ > + /* Fix for machine name #ifdefs that are not in the namespace reserved > + by the C standard. They won't be defined if compiling with -ansi, > + and the headers will break. We go to some trouble to only change > +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) > + /* If the 'name_pat' matches in between base and limit, we have > + a bogon. It is not worth the hassle of excluding comments > + because comments on #if/#ifdef lines are rare, and strings on > +- such lines are illegal. > ++ such lines are only legal in a "__has_include" directive. > + > + REG_NOTBOL means 'base' is not at the beginning of a line, which > + shouldn't matter since the name_re has no ^ anchor, but let's > +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) > + break; > + > + p = base + match[0].rm_so; > +- base += match[0].rm_eo; > + > ++ /* Check if the match is in __has_include(...) (PR 91085). */ > ++ q = check_has_inc (base, p, limit); > ++ if (q) > ++ { > ++ base = q + 1; > ++ goto again; > ++ } > ++ > ++ base += match[0].rm_eo; > + /* One more test: if on the same line we have the same string > + with the appropriate underscores, then leave it alone. > + We want exactly two leading and trailing underscores. */ > +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def > +index f58e7771e1c..71bd717c233 100644 > +--- a/fixincludes/inclhack.def > ++++ b/fixincludes/inclhack.def > +@@ -3114,7 +3114,8 @@ fix = { > + c_fix = machine_name; > + > + test_text = "/* MACH_DIFF: */\n" > +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" > ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " > ++ "defined( linux ) || __has_include ( )" > + "\n/* no uniform test, so be careful :-) */"; > + }; > + > +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h > +index cf95321fb86..8b3accaf04e 100644 > +--- a/fixincludes/tests/base/testing.h > ++++ b/fixincludes/tests/base/testing.h > +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ > + > + #if defined( MACHINE_NAME_CHECK ) > + /* MACH_DIFF: */ > +-#if defined( i386 ) || defined( sparc ) || defined( vax ) > ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) > + /* no uniform test, so be careful :-) */ > + #endif /* MACHINE_NAME_CHECK */ > + > +-- > +2.37.3 > + From thomas.petazzoni at bootlin.com Wed Oct 26 11:35:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:35:59 +0200 Subject: [Buildroot] [git commit] package/gcc: add patch to fix glibc header conflict Message-ID: <20221026113607.39DA1870FE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4ed7d51d1896144caecfd40cf760cf13bbdb9c9d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This commit backports the patch "fixinc: don't "fix" machine names in __has_include(...)" from upstream GCC, which is needed to resolve a header conflict between glibc headers and kernel headers, which has appeared since we bumped glibc to version 2.36 in commit 80c8c15c8534a24382b900a07082a289a368f736. The problem comes from the "fixinc" logic used by gcc to fixup some headers files, generated inside an include-fixed/ folder. This logic ended up replacing "linux/mount.h" by "__linux__/mount.h" in __has_include() invocation, like this: #ifdef __has_include # if __has_include ("__linux__/mount.h") # include "linux/mount.h" # endif #endif in build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With this fix in place, this "include-fixed" header is no longer generated, avoiding the problem. This issue was visible in two different ways in glibc configurations: - As a build failure during the gcc build itself, for architectures that support libsanitizer, as libsanitizer includes mount.h, and would therefore encounter the header conflict. - As a build failure during another user-space package (such as sysvinit for example), on architectures when libsanitizer isn't used, and therefore for which the gcc build was successful, but the header conflict shows up when building some "random" user-space package. The problem is already fixed in GCC 12.2.0, so no patch is required. The problem did not exist back in GCC 8.4.0, so this version does not need patching. Consequently, the patch is only needed for GCC 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. Fixes: (gcc build issue, on architecture that supports libsanitizer) http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ (sysvinit build issue, on architecture that does not support libsanitizer) http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ (crun) http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ (libarchive) http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. Fixes: https://bugs.busybox.net/show_bug.cgi?id=15021 Signed-off-by: Thomas Petazzoni Reviewed-by: Romain Naour Acked-by: Arnout Vandecappelle (Essensium/Mind) Signed-off-by: Thomas Petazzoni --- ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ ...t-fix-machine-names-in-__has_include-.-PR.patch | 124 +++++++++++++++++++++ 3 files changed, 372 insertions(+) diff --git a/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8614537794 --- /dev/null +++ b/package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From a6eedb593ca068d0ad8655dbb97fcd6371cba682 Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..4e93f6ab96 --- /dev/null +++ b/package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From de3f4ee9a5bd2adcb5ff2e1690db2567fda1473c Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 5b23a8b640d..404b420f302 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index 066bef99162..b7ad6982e96 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3154,7 +3154,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + diff --git a/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch new file mode 100644 index 0000000000..8b6be49e68 --- /dev/null +++ b/package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch @@ -0,0 +1,124 @@ +From 65754c50a57e5a891cee75bb744eb93fdb3c443e Mon Sep 17 00:00:00 2001 +From: Xi Ruoyao +Date: Mon, 28 Jun 2021 13:54:58 +0800 +Subject: [PATCH] fixinc: don't "fix" machine names in __has_include(...) + [PR91085] + +fixincludes/ + + PR other/91085 + * fixfixes.c (check_has_inc): New static function. + (machine_name_fix): Don't replace header names in + __has_include(...). + * inclhack.def (machine_name): Adjust test. + * tests/base/testing.h: Update. + +Upstream: 6bf383c37e6131a8e247e8a0997d55d65c830b6d +Signed-off-by: Thomas Petazzoni +--- + fixincludes/fixfixes.c | 45 ++++++++++++++++++++++++++++++-- + fixincludes/inclhack.def | 3 ++- + fixincludes/tests/base/testing.h | 2 +- + 3 files changed, 46 insertions(+), 4 deletions(-) + +diff --git a/fixincludes/fixfixes.c b/fixincludes/fixfixes.c +index 034e15d9985..3ff87812036 100644 +--- a/fixincludes/fixfixes.c ++++ b/fixincludes/fixfixes.c +@@ -477,6 +477,39 @@ FIX_PROC_HEAD( char_macro_def_fix ) + fputs (text, stdout); + } + ++/* Check if the pattern at pos is actually in a "__has_include(...)" ++ directive. Return the pointer to the ')' of this ++ "__has_include(...)" if it is, NULL otherwise. */ ++static const char * ++check_has_inc (const char *begin, const char *pos, const char *end) ++{ ++ static const char has_inc[] = "__has_include"; ++ const size_t has_inc_len = sizeof (has_inc) - 1; ++ const char *p; ++ ++ for (p = memmem (begin, pos - begin, has_inc, has_inc_len); ++ p != NULL; ++ p = memmem (p, pos - p, has_inc, has_inc_len)) ++ { ++ p += has_inc_len; ++ while (p < end && ISSPACE (*p)) ++ p++; ++ ++ /* "__has_include" may appear as "defined(__has_include)", ++ search for the next appearance then. */ ++ if (*p != '(') ++ continue; ++ ++ /* To avoid too much complexity, just hope there is never a ++ ')' in a header name. */ ++ p = memchr (p, ')', end - p); ++ if (p == NULL || p > pos) ++ return p; ++ } ++ ++ return NULL; ++} ++ + /* Fix for machine name #ifdefs that are not in the namespace reserved + by the C standard. They won't be defined if compiling with -ansi, + and the headers will break. We go to some trouble to only change +@@ -524,7 +557,7 @@ FIX_PROC_HEAD( machine_name_fix ) + /* If the 'name_pat' matches in between base and limit, we have + a bogon. It is not worth the hassle of excluding comments + because comments on #if/#ifdef lines are rare, and strings on +- such lines are illegal. ++ such lines are only legal in a "__has_include" directive. + + REG_NOTBOL means 'base' is not at the beginning of a line, which + shouldn't matter since the name_re has no ^ anchor, but let's +@@ -544,8 +577,16 @@ FIX_PROC_HEAD( machine_name_fix ) + break; + + p = base + match[0].rm_so; +- base += match[0].rm_eo; + ++ /* Check if the match is in __has_include(...) (PR 91085). */ ++ q = check_has_inc (base, p, limit); ++ if (q) ++ { ++ base = q + 1; ++ goto again; ++ } ++ ++ base += match[0].rm_eo; + /* One more test: if on the same line we have the same string + with the appropriate underscores, then leave it alone. + We want exactly two leading and trailing underscores. */ +diff --git a/fixincludes/inclhack.def b/fixincludes/inclhack.def +index f58e7771e1c..71bd717c233 100644 +--- a/fixincludes/inclhack.def ++++ b/fixincludes/inclhack.def +@@ -3114,7 +3114,8 @@ fix = { + c_fix = machine_name; + + test_text = "/* MACH_DIFF: */\n" +- "#if defined( i386 ) || defined( sparc ) || defined( vax )" ++ "#if defined( i386 ) || defined( sparc ) || defined( vax ) || " ++ "defined( linux ) || __has_include ( )" + "\n/* no uniform test, so be careful :-) */"; + }; + +diff --git a/fixincludes/tests/base/testing.h b/fixincludes/tests/base/testing.h +index cf95321fb86..8b3accaf04e 100644 +--- a/fixincludes/tests/base/testing.h ++++ b/fixincludes/tests/base/testing.h +@@ -64,7 +64,7 @@ BSD43__IOWR('T', 1) /* Some are multi-line */ + + #if defined( MACHINE_NAME_CHECK ) + /* MACH_DIFF: */ +-#if defined( i386 ) || defined( sparc ) || defined( vax ) ++#if defined( i386 ) || defined( sparc ) || defined( vax ) || defined( linux ) || __has_include ( ) + /* no uniform test, so be careful :-) */ + #endif /* MACHINE_NAME_CHECK */ + +-- +2.37.3 + From thomas.petazzoni at bootlin.com Wed Oct 26 11:36:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:36:26 +0200 Subject: [Buildroot] [PATCH] package/gcc: add patch to fix glibc header conflict In-Reply-To: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> References: <20221025201400.3816183-1-thomas.petazzoni@bootlin.com> Message-ID: <20221026133626.45a9cdb7@windsurf> On Tue, 25 Oct 2022 22:13:59 +0200 Thomas Petazzoni via buildroot wrote: > This commit backports the patch "fixinc: don't "fix" machine names in > __has_include(...)" from upstream GCC, which is needed to resolve a > header conflict between glibc headers and kernel headers, which has > appeared since we bumped glibc to version 2.36 in commit > 80c8c15c8534a24382b900a07082a289a368f736. > > The problem comes from the "fixinc" logic used by gcc to fixup some > headers files, generated inside an include-fixed/ folder. This logic > ended up replacing "linux/mount.h" by "__linux__/mount.h" in > __has_include() invocation, like this: > > #ifdef __has_include > # if __has_include ("__linux__/mount.h") > # include "linux/mount.h" > # endif > #endif > > in > build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With > this fix in place, this "include-fixed" header is no longer generated, > avoiding the problem. > > This issue was visible in two different ways in glibc configurations: > > - As a build failure during the gcc build itself, for architectures > that support libsanitizer, as libsanitizer includes mount.h, and > would therefore encounter the header conflict. > > - As a build failure during another user-space package (such as > sysvinit for example), on architectures when libsanitizer isn't > used, and therefore for which the gcc build was successful, but the > header conflict shows up when building some "random" user-space > package. > > The problem is already fixed in GCC 12.2.0, so no patch is > required. The problem did not exist back in GCC 8.4.0, so this version > does not need patching. Consequently, the patch is only needed for GCC > 10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version. > > Fixes: > > (gcc build issue, on architecture that supports libsanitizer) > http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/ > > (sysvinit build issue, on architecture that does not support libsanitizer) > http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/ > > (crun) > http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/ > > (libarchive) > http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/ > > Thanks a lot to Peter Seiderer for pointing the relevant GCC commit. > > Fixes: > > https://bugs.busybox.net/show_bug.cgi?id=15021 > > Signed-off-by: Thomas Petazzoni > --- > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > ...-machine-names-in-__has_include-.-PR.patch | 124 ++++++++++++++++++ > 3 files changed, 372 insertions(+) > create mode 100644 package/gcc/10.4.0/0006-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/11.3.0/0007-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch > create mode 100644 package/gcc/arc-2020.09-release/0003-fixinc-don-t-fix-machine-names-in-__has_include-.-PR.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 11:48:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:48:45 +0200 Subject: [Buildroot] [git commit] package/libcodec2: fix build without C++ Message-ID: <20221026114856.B683C87106@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2a7f501bf3e31ca47e57143770684ce234d705a7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure without C++ raised since bump to version 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): The C++ compiler "/usr/bin/clang++" is not able to compile a simple test program. Fixes: - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) diff --git a/package/libcodec2/0001-update-cmake.patch b/package/libcodec2/0001-update-cmake.patch new file mode 100644 index 0000000000..e983800e27 --- /dev/null +++ b/package/libcodec2/0001-update-cmake.patch @@ -0,0 +1,301 @@ +From 812d69af486e608a10380ed5817b03d08c6e786a Mon Sep 17 00:00:00 2001 +From: "A. Maitland Bottoms" +Date: Sun, 17 Jul 2022 17:04:44 -0400 +Subject: [PATCH] update cmake + +Some minor refactoring of Codec2 build to better use CMake +features to improve readability ans maintainability. + +[Retrieved from: +https://github.com/drowe67/codec2/commit/812d69af486e608a10380ed5817b03d08c6e786a] +Signed-off-by: Fabrice Fontaine +--- + CMakeLists.txt | 48 +++++--------------------- + src/CMakeLists.txt | 84 ++++++++++++++++++++++++---------------------- + 2 files changed, 53 insertions(+), 79 deletions(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 54ac1f4f4..998af5ddf 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -5,19 +5,13 @@ + # Please report questions, comments, problems, or patches to the freetel + # mailing list: https://lists.sourceforge.net/lists/listinfo/freetel-codec2 + # +-set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") +- +-project(codec2) +- +-cmake_minimum_required(VERSION 3.0) +- +-# Set policies here, probably should move to cmake dir. +-if(POLICY CMP0075) +- cmake_policy(SET CMP0075 NEW) +-endif() +-if(POLICY CMP0079) +- cmake_policy(SET CMP0079 NEW) +-endif() ++cmake_minimum_required(VERSION 3.13) ++project(CODEC2 ++ VERSION 1.0.5 ++ DESCRIPTION "Next-Generation Digital Voice for Two-Way Radio" ++ HOMEPAGE_URL "https://www.rowetel.com/codec2.html" ++ LANGUAGES C ++ ) + + include(GNUInstallDirs) + mark_as_advanced(CLEAR +@@ -39,23 +33,6 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + "separate build directory and run cmake from there.") + endif("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") + +-# +-# Set project version information. This should probably be done via external +-# file at some point. +-# +-set(CODEC2_VERSION_MAJOR 1) +-set(CODEC2_VERSION_MINOR 0) +-# Set to patch level if needed, otherwise leave FALSE. +-# Must be positive (non-zero) if set, since 0 == FALSE in CMake. +-set(CODEC2_VERSION_PATCH 5) +-set(CODEC2_VERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-# Patch level version bumps should not change API/ABI. +-set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") +-if(CODEC2_VERSION_PATCH) +- set(CODEC2_VERSION "${CODEC2_VERSION}.${CODEC2_VERSION_PATCH}") +-endif() +-message(STATUS "codec2 version: ${CODEC2_VERSION}") +- + # Set default build type + if(NOT CMAKE_BUILD_TYPE) + set(CMAKE_BUILD_TYPE "Debug") +@@ -65,6 +42,7 @@ endif() + if(BUILD_OSX_UNIVERSAL) + set(CMAKE_OSX_ARCHITECTURES "x86_64;arm64") + endif(BUILD_OSX_UNIVERSAL) ++set(CMAKE_OSX_DEPLOYMENT_TARGET "10.9" CACHE STRING "Minimum OS X deployment version") + + # + # Find the git hash if this is a working copy. +@@ -190,10 +168,6 @@ if (_GNU_SOURCE) + add_definitions(-D_GNU_SOURCE=1) + endif() + +-if(UNIX) +- set(CMAKE_REQUIRED_LIBRARIES m) +-endif() +- + check_symbol_exists(floor math.h HAVE_FLOOR) + check_symbol_exists(ceil math.h HAVE_CEIL) + check_symbol_exists(pow math.h HAVE_POW) +@@ -288,11 +262,7 @@ else() + endif() + + # Return the date (yyyy-mm-dd) +-macro(DATE RESULT) +- execute_process(COMMAND "date" "+%Y%m%d" OUTPUT_VARIABLE ${RESULT}) +-endmacro() +-DATE(DATE_RESULT) +-string(REGEX REPLACE "\n$" "" DATE_RESULT "${DATE_RESULT}") ++string(TIMESTAMP DATE_RESULT "%Y-%m-%d" UTC) + message(STATUS "Compilation date = XX${DATE_RESULT}XX") + + set(CPACK_PACKAGE_VERSION_PATCH "${CPACK_PACKAGE_VERSION_PATCH}-${DATE_RESULT}-${FREEDV_HASH}") +diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt +index 642404962..cb0990bc2 100644 +--- a/src/CMakeLists.txt ++++ b/src/CMakeLists.txt +@@ -81,7 +81,7 @@ else(CMAKE_CROSSCOMPILING) + # Build code generator binaries. These do not get installed. + # generate_codebook + add_executable(generate_codebook generate_codebook.c) +- target_link_libraries(generate_codebook m ${CMAKE_REQUIRED_LIBRARIES}) ++ target_link_libraries(generate_codebook m) + # Make native builds available for cross-compiling. + export(TARGETS generate_codebook + FILE ${CMAKE_BINARY_DIR}/ImportExecutables.cmake) +@@ -238,12 +238,16 @@ set(CODEC2_PUBLIC_HEADERS + # + # Setup the codec2 library + # ++# Patch level version bumps should not change API/ABI. ++set(SOVERSION "${CODEC2_VERSION_MAJOR}.${CODEC2_VERSION_MINOR}") ++message(STATUS "codec2 version: ${CODEC2_VERSION}") + add_library(codec2 ${CODEC2_SRCS}) + if(UNIX) +- target_link_libraries(codec2 m) ++ target_link_libraries(codec2 PUBLIC m) + endif(UNIX) + if(LPCNET AND lpcnetfreedv_FOUND) +- target_link_libraries(codec2 lpcnetfreedv) ++ target_link_libraries(codec2 PRIVATE lpcnetfreedv) ++ list(APPEND CODEC2_PUBLIC_HEADERS ${CMAKE_SOURCE_DIR}/lpcnet/src/lpcnet_freedv.h) + endif() + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) + set_target_properties(codec2 PROPERTIES +@@ -269,70 +273,70 @@ export(TARGETS codec2 + ) + + add_executable(c2enc c2enc.c) +-target_link_libraries(c2enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2enc codec2) + + add_executable(c2dec c2dec.c) +-target_link_libraries(c2dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2dec codec2) + + add_executable(c2sim c2sim.c sd.c) +-target_link_libraries(c2sim ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(c2sim codec2) + + add_executable(fdmdv_get_test_bits fdmdv_get_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_get_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_get_test_bits m) + + add_executable(fdmdv_mod fdmdv_mod.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_mod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_mod m) + + add_executable(fdmdv_demod fdmdv_demod.c fdmdv.c kiss_fft.c octave.c modem_stats.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_demod m) + + add_executable(fdmdv_put_test_bits fdmdv_put_test_bits.c fdmdv.c kiss_fft.c codec2_fft.c kiss_fftr.c) +-target_link_libraries(fdmdv_put_test_bits m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fdmdv_put_test_bits m) + + add_executable(fdmdv_channel fdmdv_channel.c) +-target_link_libraries(fdmdv_channel ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fdmdv_channel codec2) + + add_executable(insert_errors insert_errors.c) +-target_link_libraries(insert_errors ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(insert_errors) + + add_executable(freedv_tx freedv_tx.c) +-target_link_libraries(freedv_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_tx codec2) + + add_executable(freedv_rx freedv_rx.c) +-target_link_libraries(freedv_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_rx codec2) + + add_executable(freedv_data_raw_tx freedv_data_raw_tx.c) +-target_link_libraries(freedv_data_raw_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_tx codec2) + + add_executable(freedv_data_raw_rx freedv_data_raw_rx.c octave.c) +-target_link_libraries(freedv_data_raw_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_raw_rx codec2) + + add_executable(freedv_data_tx freedv_data_tx.c) +-target_link_libraries(freedv_data_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_tx codec2) + + add_executable(freedv_data_rx freedv_data_rx.c) +-target_link_libraries(freedv_data_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_data_rx codec2) + + add_executable(freedv_mixed_tx freedv_mixed_tx.c) +-target_link_libraries(freedv_mixed_tx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_tx codec2) + + add_executable(freedv_mixed_rx freedv_mixed_rx.c) +-target_link_libraries(freedv_mixed_rx ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(freedv_mixed_rx codec2) + + add_executable(fsk_mod fsk_mod.c) +-target_link_libraries(fsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_mod codec2) + + add_executable(fsk_mod_ext_vco fsk_mod_ext_vco.c) +-target_link_libraries(fsk_mod_ext_vco m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fsk_mod_ext_vco m) + + add_executable(fsk_demod fsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_demod codec2) + + add_executable(fsk_get_test_bits fsk_get_test_bits.c) + target_link_libraries(fsk_get_test_bits) + + add_executable(fsk_put_test_bits fsk_put_test_bits.c) +-target_link_libraries(fsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fsk_put_test_bits codec2) + + add_executable(framer framer.c) + target_link_libraries(framer) +@@ -341,46 +345,46 @@ add_executable(deframer deframer.c) + target_link_libraries(deframer) + + add_executable(fm_demod fm_demod.c fm.c) +-target_link_libraries(fm_demod m ${CMAKE_REQUIRED_LIBRARIES}) ++target_link_libraries(fm_demod m) + + add_executable(cohpsk_mod cohpsk_mod.c) +-target_link_libraries(cohpsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_mod codec2) + + add_executable(ofdm_get_test_bits ofdm_get_test_bits.c) +-target_link_libraries(ofdm_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_get_test_bits codec2) + + add_executable(ofdm_put_test_bits ofdm_put_test_bits.c) +-target_link_libraries(ofdm_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_put_test_bits codec2) + + add_executable(ofdm_mod ofdm_mod.c) +-target_link_libraries(ofdm_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_mod codec2) + + add_executable(ofdm_demod ofdm_demod.c octave.c) +-target_link_libraries(ofdm_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ofdm_demod codec2) + + add_executable(fmfsk_mod fmfsk_mod.c) +-target_link_libraries(fmfsk_mod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_mod codec2) + + add_executable(fmfsk_demod fmfsk_demod.c modem_probe.c octave.c) +-target_link_libraries(fmfsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(fmfsk_demod codec2) + + add_executable(vhf_deframe_c2 vhf_deframe_c2.c) +-target_link_libraries(vhf_deframe_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_deframe_c2 codec2) + + add_executable(vhf_frame_c2 vhf_frame_c2.c) +-target_link_libraries(vhf_frame_c2 ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(vhf_frame_c2 codec2) + + add_executable(cohpsk_demod cohpsk_demod.c octave.c) +-target_link_libraries(cohpsk_demod ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_demod codec2) + + add_executable(cohpsk_get_test_bits cohpsk_get_test_bits.c) +-target_link_libraries(cohpsk_get_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_get_test_bits codec2) + + add_executable(cohpsk_put_test_bits cohpsk_put_test_bits.c octave.c) +-target_link_libraries(cohpsk_put_test_bits ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(cohpsk_put_test_bits codec2) + + add_executable(ch ch.c) +-target_link_libraries(ch ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ch codec2) + + add_executable(tollr tollr.c) + +@@ -388,10 +392,10 @@ add_executable(ldpc_noise ldpc_noise.c) + target_link_libraries(ldpc_noise m) + + add_executable(ldpc_enc ldpc_enc.c) +-target_link_libraries(ldpc_enc ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_enc codec2) + + add_executable(ldpc_dec ldpc_dec.c) +-target_link_libraries(ldpc_dec ${CMAKE_REQUIRED_LIBRARIES} codec2) ++target_link_libraries(ldpc_dec codec2) + + install(TARGETS codec2 EXPORT codec2-config + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT lib From thomas.petazzoni at bootlin.com Wed Oct 26 11:49:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:49:16 +0200 Subject: [Buildroot] [PATCH 1/1] package/libcodec2: fix build without C++ In-Reply-To: <20221025221308.352026-1-fontaine.fabrice@gmail.com> References: <20221025221308.352026-1-fontaine.fabrice@gmail.com> Message-ID: <20221026134916.666f0299@windsurf> On Wed, 26 Oct 2022 00:13:08 +0200 Fabrice Fontaine wrote: > Fix the following build failure without C++ raised since bump to version > 1.0.5 in commit a380244766342aa7172dc7b572c99db322f74c38: > > CMake Error at /home/autobuild/autobuild/instance-7/output-1/host/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message): > The C++ compiler > > "/usr/bin/clang++" > > is not able to compile a simple test program. > > Fixes: > - http://autobuild.buildroot.net/results/30b519aa60d5baddb4015cf3608baa04a30be907 > > Signed-off-by: Fabrice Fontaine > --- > package/libcodec2/0001-update-cmake.patch | 301 ++++++++++++++++++++++ > 1 file changed, 301 insertions(+) > create mode 100644 package/libcodec2/0001-update-cmake.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 11:57:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:57:59 +0200 Subject: [Buildroot] [git commit] package/file: fix uclibc build Message-ID: <20221026115810.7AC268710A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d69752c7582a0b1dd14d05f46fa7a22b2bcfb530 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following uclibc build failure raised since bump to version 5.43 in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: file.c: In function 'fname_print': file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given 605 | putc(c); | ^ Fixes: - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...src-file.c-fix-build-without-wide-support.patch | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/package/file/0001-src-file.c-fix-build-without-wide-support.patch b/package/file/0001-src-file.c-fix-build-without-wide-support.patch new file mode 100644 index 0000000000..29be9fa2cd --- /dev/null +++ b/package/file/0001-src-file.c-fix-build-without-wide-support.patch @@ -0,0 +1,39 @@ +From f2ab09d0e1388657f6b7e62bacc383ebea91f5b9 Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Wed, 26 Oct 2022 00:23:32 +0200 +Subject: [PATCH] src/file.c: fix build without wide support + +Fix the following build failure without wide support (e.g. on uclibc) +raised since version 5.43 and +https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: + +file.c: In function 'fname_print': +file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given + 605 | putc(c); + | ^ + +Fixes: + - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 + +Signed-off-by: Fabrice Fontaine +[Upstream status: https://bugs.astron.com/view.php?id=398] +--- + src/file.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/file.c b/src/file.c +index f5f46524..1c23defc 100644 +--- a/src/file.c ++++ b/src/file.c +@@ -615,7 +615,7 @@ fname_print(const char *inname) + for (i = 0; i < n; i++) { + unsigned char c = CAST(unsigned char, inname[i]); + if (isprint(c)) { +- putc(c); ++ putc(c, stdout); + continue; + } + file_octal(c); +-- +2.35.1 + From thomas.petazzoni at bootlin.com Wed Oct 26 11:58:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 13:58:14 +0200 Subject: [Buildroot] [PATCH 1/1] package/file: fix uclibc build In-Reply-To: <20221025223804.583594-1-fontaine.fabrice@gmail.com> References: <20221025223804.583594-1-fontaine.fabrice@gmail.com> Message-ID: <20221026135814.1272a014@windsurf> On Wed, 26 Oct 2022 00:38:04 +0200 Fabrice Fontaine wrote: > Fix the following uclibc build failure raised since bump to version 5.43 > in commit f17b56f1aa43361eff4a81538a61e34c509ebb70 and > https://github.com/file/file/commit/c80065fe6900be5e794941e29b32440e9969b1c3: > > file.c: In function 'fname_print': > file.c:605:10: error: macro "putc" requires 2 arguments, but only 1 given > 605 | putc(c); > | ^ > > Fixes: > - http://autobuild.buildroot.org/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 > > Signed-off-by: Fabrice Fontaine > --- > ...ile.c-fix-build-without-wide-support.patch | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 package/file/0001-src-file.c-fix-build-without-wide-support.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 12:58:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 14:58:35 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink Message-ID: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> The musl Makefile installs the dynamic loader as a symlink to libc.so with the following rule: $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so $(INSTALL) -D -l $(libdir)/libc.so $@ || true While it works, the drawback is that ld-musl-.so ends up being a symlink to /lib/libc.so. While it works on the target, it means we have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as /lib/libc.so doesn't make sense on the build machine. This generally doesn't cause any problem *except* when we tell Qemu to use $(STAGING_DIR) as the library directory when running target programs through the Qemu user emulation mode. This is for example node inside the NodeJS build. Due to this broken symlink, Qemu can't find libc.so that is pointed to be the dynamic loader symlink causing this build error: qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory Since this is not really a bug in the musl build system, we address this issue by overriding the symlink to be a relative path. The dynamic loader is always installed in /lib, and libc.so is also always installed in /lib because we pass libdir=/lib when configuring musl. So we can simply have a ld-musl* -> libc.so symbolic link. We use ld-musl* as a wildcard so that we don't need to have extra logic to determine the exact name of the dynamic loader symlink, and simply override the one that exists. Fixes: http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ https://bugs.busybox.net/show_bug.cgi?id=15061 Cc: hello.skyclo at gmail.com Signed-off-by: Thomas Petazzoni --- package/musl/musl.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/musl/musl.mk b/package/musl/musl.mk index 44c79da6f7..30c3c2fbc0 100644 --- a/package/musl/musl.mk +++ b/package/musl/musl.mk @@ -60,12 +60,14 @@ endef define MUSL_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* endef define MUSL_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(TARGET_DIR) install-libs $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* endef $(eval $(generic-package)) -- 2.37.3 From bugzilla at busybox.net Wed Oct 26 12:59:47 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Wed, 26 Oct 2022 12:59:47 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 --- Comment #2 from Thomas Petazzoni --- I submitted a fix for this issue at https://patchwork.ozlabs.org/project/buildroot/patch/20221026125836.3910730-1-thomas.petazzoni at bootlin.com/ -- You are receiving this mail because: You are on the CC list for the bug. From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:27 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:27 +0200 Subject: [Buildroot] [PATCH 0/7] Disable packages with CONFIG_WIRELESS on s390x Message-ID: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Linux s390x doesn't support CONFIG_WIRELESS so this patchset disable all packages with Linux CONFIG_WIRELESS for s390x architecture. Giulio Benetti (7): package/rtl8189es: disable package for s390x architecture package/rtl8189fs: disable package for s390x architecture package/rtl8723bu: disable package for s390x architecture package/rtl8723ds: disable package for s390x architecture package/rtl8812au-aircrack-ng: disable package for s390x architecture package/rtl8821au: disable package for s390x architecture package/wilc-driver: disable package for s390x architecture package/rtl8189es/Config.in | 2 ++ package/rtl8189fs/Config.in | 2 ++ package/rtl8723bu/Config.in | 2 ++ package/rtl8723ds/Config.in | 2 ++ package/rtl8812au-aircrack-ng/Config.in | 2 ++ package/rtl8821au/Config.in | 2 ++ package/wilc-driver/Config.in | 2 ++ 7 files changed, 14 insertions(+) -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:29 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:29 +0200 Subject: [Buildroot] [PATCH 2/7] package/rtl8189fs: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-3-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8189fs/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189fs/Config.in b/package/rtl8189fs/Config.in index ae69b79235..78eeed1a4f 100644 --- a/package/rtl8189fs/Config.in +++ b/package/rtl8189fs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189FS bool "rtl8189fs" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189fs. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189FS https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189fs needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:28 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:28 +0200 Subject: [Buildroot] [PATCH 1/7] package/rtl8189es: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-2-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Fixes: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ Signed-off-by: Giulio Benetti --- package/rtl8189es/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189es/Config.in b/package/rtl8189es/Config.in index 2e3474e5e1..11dd225436 100644 --- a/package/rtl8189es/Config.in +++ b/package/rtl8189es/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189ES bool "rtl8189es" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189es. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189ES https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189es needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:30 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:30 +0200 Subject: [Buildroot] [PATCH 3/7] package/rtl8723bu: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-4-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8723bu/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723bu/Config.in b/package/rtl8723bu/Config.in index 266a794a7d..7c624fc4d4 100644 --- a/package/rtl8723bu/Config.in +++ b/package/rtl8723bu/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723BU bool "rtl8723bu" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bu wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723BU https://github.com/lwfinger/rtl8723bu comment "rtl8723bu needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:31 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:31 +0200 Subject: [Buildroot] [PATCH 4/7] package/rtl8723ds: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-5-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8723ds/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723ds/Config.in b/package/rtl8723ds/Config.in index ef7dd39a68..e5123a2aae 100644 --- a/package/rtl8723ds/Config.in +++ b/package/rtl8723ds/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723DS bool "rtl8723ds" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bs wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723DS https://github.com/lwfinger/rtl8723ds comment "rtl8723ds needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:32 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:32 +0200 Subject: [Buildroot] [PATCH 5/7] package/rtl8812au-aircrack-ng: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-6-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8812au-aircrack-ng/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8812au-aircrack-ng/Config.in b/package/rtl8812au-aircrack-ng/Config.in index 70cbd15221..d903ab2b3f 100644 --- a/package/rtl8812au-aircrack-ng/Config.in +++ b/package/rtl8812au-aircrack-ng/Config.in @@ -1,8 +1,10 @@ comment "rtl8812au-aircrack-ng needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8812AU_AIRCRACK_NG bool "rtl8812au-aircrack-ng" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8812au wifi driver (aircrack-ng repository) -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:33 +0200 Subject: [Buildroot] [PATCH 6/7] package/rtl8821au: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-7-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/rtl8821au/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8821au/Config.in b/package/rtl8821au/Config.in index 87c191b22a..3d7bbf643d 100644 --- a/package/rtl8821au/Config.in +++ b/package/rtl8821au/Config.in @@ -1,8 +1,10 @@ comment "rtl8821au needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8821AU bool "rtl8821au" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8821au wifi driver -- 2.34.1 From giulio.benetti at benettiengineering.com Wed Oct 26 13:26:34 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 15:26:34 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026132634.999254-8-giulio.benetti@benettiengineering.com> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti --- package/wilc-driver/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in index 7ed062bb66..7f970bd38b 100644 --- a/package/wilc-driver/Config.in +++ b/package/wilc-driver/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_WILC_DRIVER bool "wilc kernel module" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help External kernel module for WILC1000/3000 devices. @@ -59,4 +60,5 @@ endif endif comment "wilc kernel module needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL -- 2.34.1 From yann.morin at orange.com Wed Oct 26 13:31:22 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Wed, 26 Oct 2022 15:31:22 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> Message-ID: <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> Thomas, All, On 2022-10-26 14:58 +0200, Thomas Petazzoni via buildroot spake thusly: > The musl Makefile installs the dynamic loader as a symlink to libc.so > with the following rule: > > $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so > $(INSTALL) -D -l $(libdir)/libc.so $@ || true > > While it works, the drawback is that ld-musl-.so ends up being a > symlink to /lib/libc.so. While it works on the target, it means we > have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as > /lib/libc.so doesn't make sense on the build machine. [--SNIP--] > diff --git a/package/musl/musl.mk b/package/musl/musl.mk > index 44c79da6f7..30c3c2fbc0 100644 > --- a/package/musl/musl.mk > +++ b/package/musl/musl.mk > @@ -60,12 +60,14 @@ endef > define MUSL_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers > + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* > endef > > define MUSL_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(TARGET_DIR) install-libs > $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) > + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* > endef What about external toolchains? Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From thomas.petazzoni at bootlin.com Wed Oct 26 13:49:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 15:49:02 +0200 Subject: [Buildroot] [git commit] package/glibc: fix x86_64 builds with -Os Message-ID: <20221026134929.0743787113@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e548b7642ac14f2440427cb6ae11242680d3d935 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport upstream commit for x86_64 builds with -Os reported by [1]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 http://autobuild.buildroot.net/results/5b442f95587ddc65a995bbd9e310c88a66c55b1f Signed-off-by: Romain Naour Reviewed-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch new file mode 100644 index 0000000000..4470324f1c --- /dev/null +++ b/package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch @@ -0,0 +1,48 @@ +From 3935b543adcb9a46ab79f8931bc489068b049378 Mon Sep 17 00:00:00 2001 +From: Adhemerval Zanella Netto +Date: Wed, 21 Sep 2022 10:51:08 -0300 +Subject: [PATCH] x86: Fix -Os build (BZ #29576) + +The compiler might transform __stpcpy calls (which are routed to +__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy +multiarch implementation does not build any working symbol due +ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld). + +Checked on x86_64-linux-gnu. +Reviewed-by: Carlos O'Donell +Tested-by: Carlos O'Donell + +(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7) +Signed-off-by: Romain Naour +--- + sysdeps/x86_64/multiarch/rtld-strcpy.S | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + create mode 100644 sysdeps/x86_64/multiarch/rtld-strcpy.S + +diff --git a/sysdeps/x86_64/multiarch/rtld-strcpy.S b/sysdeps/x86_64/multiarch/rtld-strcpy.S +new file mode 100644 +index 0000000000..19439c553d +--- /dev/null ++++ b/sysdeps/x86_64/multiarch/rtld-strcpy.S +@@ -0,0 +1,18 @@ ++/* Copyright (C) 2022 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ . */ ++ ++#include "../strcpy.S" +-- +2.34.3 + From thomas.petazzoni at bootlin.com Wed Oct 26 13:51:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 15:51:28 +0200 Subject: [Buildroot] [PATCH] package/glibc: Fix x86_64 builds with -Os In-Reply-To: <20221009153521.12444-1-romain.naour@gmail.com> References: <20221009153521.12444-1-romain.naour@gmail.com> Message-ID: <20221026155128.104059e2@windsurf> On Sun, 9 Oct 2022 17:35:21 +0200 Romain Naour wrote: > Backport upstream commit for x86_64 builds with -Os reported by [1]. > > [1] https://sourceware.org/bugzilla/show_bug.cgi?id=29576 > > Fixes: > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229902 > https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229956 > > Signed-off-by: Romain Naour > --- > .../0002-x86-Fix-Os-build-BZ-29576.patch | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 package/glibc/0002-x86-Fix-Os-build-BZ-29576.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From kris at embeddedTS.com Wed Oct 26 17:32:28 2022 From: kris at embeddedTS.com (Kris Bahnsen) Date: Wed, 26 Oct 2022 10:32:28 -0700 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <20221026132634.999254-8-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> <20221026132634.999254-8-giulio.benetti@benettiengineering.com> Message-ID: <1666805548.3174.1.camel@embeddedTS.com> On Wed, 2022-10-26 at 15:26 +0200, Giulio Benetti wrote: > s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this > package for this architecture. > > Signed-off-by: Giulio Benetti > --- > package/wilc-driver/Config.in | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in > index 7ed062bb66..7f970bd38b 100644 > --- a/package/wilc-driver/Config.in > +++ b/package/wilc-driver/Config.in > @@ -1,5 +1,6 @@ > config BR2_PACKAGE_WILC_DRIVER > bool "wilc kernel module" > + depends on !BR2_s390x > depends on BR2_LINUX_KERNEL > help > External kernel module for WILC1000/3000 devices. > @@ -59,4 +60,5 @@ endif > endif > > comment "wilc kernel module needs a Linux kernel to be built" > + depends on !BR2_s390x > depends on !BR2_LINUX_KERNEL I don't know much on the s390x arch, nor Buildroot paradigms for disabling packages per-architecture, however the change itself looks good to me. Reviewed-by: Kris Bahnsen From giulio.benetti at benettiengineering.com Wed Oct 26 17:53:33 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 19:53:33 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <1666805548.3174.1.camel@embeddedTS.com> References: <1666805548.3174.1.camel@embeddedTS.com> Message-ID: <67DEC0A4-EAEE-42F7-A07E-9265B1897153@benettiengineering.com> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: favicon.ico Type: image/vnd.microsoft.icon Size: 766 bytes Desc: not available URL: From thomas.petazzoni at bootlin.com Wed Oct 26 17:54:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 19:54:29 +0200 Subject: [Buildroot] [PATCH] package/binutils: prevent selecting 2.37 for AVX512 systems Message-ID: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> Support for the AVX512FP16 instructions was added in binutils 2.38. See the binutils 2.38 releases notes [0] that state: X86: [...] * Add support for Intel AVX512_FP16 instructions. [0] https://sourceware.org/pipermail/binutils/2022-February/119721.html It turns out that when building GCC 12.x, some of these AVX512FP16 instructions are now used, and therefore when binutils < 2.38 is used, the build fails as the assembler does not recognize those instructions: /tmp/ccChzL2g.s: Assembler messages: /tmp/ccChzL2g.s:20: Error: no such instruction: `vmovw 24(%esp),%xmm2' /tmp/ccChzL2g.s:21: Error: no such instruction: `vmovw 28(%esp),%xmm3' /tmp/ccChzL2g.s:22: Error: no such instruction: `vmovw 32(%esp),%xmm4' /tmp/ccChzL2g.s:23: Error: no such instruction: `vmovw 36(%esp),%xmm5' /tmp/ccChzL2g.s:30: Error: no such instruction: `vcvtsh2ss %xmm2,%xmm6,%xmm6' /tmp/ccChzL2g.s:36: Error: no such instruction: `vcvtsh2ss %xmm3,%xmm6,%xmm6' /tmp/ccChzL2g.s:42: Error: no such instruction: `vcvtsh2ss %xmm4,%xmm7,%xmm7' /tmp/ccChzL2g.s:48: Error: no such instruction: `vcvtsh2ss %xmm5,%xmm1,%xmm1' /tmp/ccChzL2g.s:80: Error: no such instruction: `vcvtss2sh (%esp),%xmm1,%xmm1' /tmp/ccChzL2g.s:96: Error: no such instruction: `vcvtss2sh (%esp),%xmm0,%xmm0' /tmp/ccChzL2g.s:100: Error: no such instruction: `vucomish %xmm1,%xmm1' /tmp/ccChzL2g.s:103: Error: no such instruction: `vucomish %xmm0,%xmm0' /tmp/ccChzL2g.s:122: Error: no such instruction: `vucomish %xmm2,%xmm2' The same issue does not occur with GCC 11.x, but nothing prevents other packages than GCC to use those instructions, so the problem really lies on the binutils side missing the support for those instructions. Also, in Buildroot, we do not distinguish AVX512 in general from AVX512FP16 specifically, so our only option is to make binutils 2.37 unavailable for AVX512 systems even if some of them perhaps don't support AVX512FP16 anyway. This seems like a reasonable trade-off, as binutils 2.38 is anyway already the default in Buildroot, and AVX512-capable systems are fairly recent, and therefore using a recent binutils version should not be a problem on these platforms. Fixes: http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ Signed-off-by: Thomas Petazzoni --- package/binutils/Config.in.host | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host index 51802db043..5dd2af2f9c 100644 --- a/package/binutils/Config.in.host +++ b/package/binutils/Config.in.host @@ -14,6 +14,9 @@ choice config BR2_BINUTILS_VERSION_2_37_X bool "binutils 2.37" + # AVX512FP16 instructions were not supported before binutils + # 2.38 + depends on !BR2_X86_CPU_HAS_AVX512 config BR2_BINUTILS_VERSION_2_38_X bool "binutils 2.38" -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 17:57:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 19:57:05 +0200 Subject: [Buildroot] [PATCH] package/nodejs: drop support for the MIPS architecture Message-ID: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> The build of NodeJS fails on mipsel due to an issue in the V8 code: ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous 4106 | Operand(static_cast(0))); There is apparently a lack of maintenance of the MIPS port of V8, as is discussed in the Github issue at https://github.com/nodejs/node/issues/26179. Until this get improved/fixed, our best option is to drop support for MIPS in our NodeJS package. Fixes: http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ Signed-off-by: Thomas Petazzoni --- package/nodejs/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 5375dfeacd..1489306be0 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -2,7 +2,6 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS bool # On ARM, at least ARMv6+ with VFPv2+ is needed default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 && BR2_ARM_CPU_HAS_VFPV2 - default y if BR2_mipsel && !BR2_MIPS_SOFT_FLOAT default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 -- 2.37.3 From giulio.benetti at benettiengineering.com Wed Oct 26 18:11:26 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Wed, 26 Oct 2022 20:11:26 +0200 Subject: [Buildroot] [PATCH 7/7] package/wilc-driver: disable package for s390x architecture In-Reply-To: <1666805548.3174.1.camel@embeddedTS.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> <20221026132634.999254-8-giulio.benetti@benettiengineering.com> <1666805548.3174.1.camel@embeddedTS.com> Message-ID: <15ee7ca2-eb3b-3a5a-549a-de372f7c9810@benettiengineering.com> Hi Kris, All, sorry for my previous HTML e-mail, On 26/10/22 19:32, Kris Bahnsen via buildroot wrote: > On Wed, 2022-10-26 at 15:26 +0200, Giulio Benetti wrote: >> s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this >> package for this architecture. >> >> Signed-off-by: Giulio Benetti >> --- >> package/wilc-driver/Config.in | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in >> index 7ed062bb66..7f970bd38b 100644 >> --- a/package/wilc-driver/Config.in >> +++ b/package/wilc-driver/Config.in >> @@ -1,5 +1,6 @@ >> config BR2_PACKAGE_WILC_DRIVER >> bool "wilc kernel module" >> + depends on !BR2_s390x >> depends on BR2_LINUX_KERNEL >> help >> External kernel module for WILC1000/3000 devices. >> @@ -59,4 +60,5 @@ endif >> endif >> >> comment "wilc kernel module needs a Linux kernel to be built" >> + depends on !BR2_s390x >> depends on !BR2_LINUX_KERNEL > > I don't know much on the s390x arch, nor Buildroot paradigms for disabling packages > per-architecture, however the change itself looks good to me. If you check here: https://elixir.bootlin.com/linux/latest/source/net/Kconfig#L371 You will see that Linux Wireless subsystem is activated only when s390x is not enabled. This also created a build failure with another rtlxxxx driver due to that: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ This is why I came in with this patchset that prevents that kind of build failure. > Reviewed-by: Kris Bahnsen Thank you Best regards -- Giulio Benetti Benetti Engineering sas From thomas.petazzoni at bootlin.com Wed Oct 26 18:34:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:34:26 +0200 Subject: [Buildroot] [PATCH 1/2] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE Message-ID: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> In the internal toolchain backend, we have a choice..endchoice block to allow the user to select the C library, between glibc, uClibc and musl. However, there are situations were no C library at all is supported. In this case, the choice does not appear, and does not allow to see the Config.in comments that are within the choice..endchoice block and that may explain why no C library is available. For example, on RISC-V 32-bit, the only C library supported is glibc, and the minimum kernel header version required by glibc on this architecture is 5.4.0. In a future commit, we are going to add this dependency on glibc (to fix build issues on configurations that have headers < 5.4.0). But since glibc is the only supported C library on RISC-V 32-bit, it means that the choice..endchoice for the C library contains no entry, preventing from seeing the Config.in comment. To address this issue, this commit adds a "dummy" BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the choice..endchoice only when no C library is available. Thanks to this, the choice..endchoice is never empty, and the Config.in comments can be seen. If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the build will anyway abort early because package/Makefile.in has a check to verify that a C library is selected, and aborts the build if not. Some could say that the problem should be resolved by instead preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that is difficult to do as the user can choose a custom header version, or simply specific that (s)he wants to use the headers of the kernel being built. In those situations, it's difficult to prevent selecting headers < 5.4.0. Signed-off-by: Thomas Petazzoni --- toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 6d55f87435..26d731d976 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL https://www.musl-libc.org/ +config BR2_TOOLCHAIN_BUILDROOT_NONE + bool "none" + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ + !BR2_PACKAGE_GLIBC_SUPPORTS && \ + !BR2_PACKAGE_MUSL_SUPPORTS + help + This option is visible if no C library is available for the + currently selected configuration. If you select this option, + the build will refuse to start as Buildroot needs a C + library to build a toolchain. Change your configuration + settings to make sure one of the C libraries is selected. + endchoice config BR2_TOOLCHAIN_BUILDROOT_LIBC -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 18:34:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:34:27 +0200 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> Message-ID: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Since glibc 2.33 (upstream commit 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed to build glibc for RISC-V 32-bit. Indeed sysdeps/unix/sysv/linux/riscv/configure.ac contains: if test $libc_cv_riscv_int_abi = ilp32; then arch_minimum_kernel=5.4.0 fi In order to take into account this dependency, we add the appropriate logic in package/glibc/Config.in and toolchain/toolchain-buildroot/Config.in. This change means that if headers < 5.4.0 are selected, then no C library at all will be available for RISC-V 32-bit, as glibc is the only C library supporting RISC-V 32-bit currently. However, thanks to the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the choice...endchoice for the C library selection will not be empty, allowing the user to see the Config.in comment explaining why glibc can't be selected. Therefore, technically this commit does prevent from creating a configuration with RISC-V 32-bit and headers < 5.4.0, but it will have BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by package/Makefile.in, which aborts the build early on pointing out that the configuration is invalid. Fixes: http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ Signed-off-by: Thomas Petazzoni --- package/glibc/Config.in | 1 + toolchain/toolchain-buildroot/Config.in | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/package/glibc/Config.in b/package/glibc/Config.in index b63f99b0b4..71c50504ac 100644 --- a/package/glibc/Config.in +++ b/package/glibc/Config.in @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 26d731d976..64f7892f98 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" depends on BR2_RISCV_64 depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" + depends on BR2_RISCV_32 + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 + comment "glibc on ARC needs a toolchain w/ headers >= 5.1" depends on BR2_arc depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 -- 2.37.3 From thomas.petazzoni at bootlin.com Wed Oct 26 18:53:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 20:53:12 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> Message-ID: <20221026205312.3f729eb8@windsurf> Hello Yann, On Wed, 26 Oct 2022 15:31:22 +0200 wrote: > What about external toolchains? That's a very good question, which I had not looked into, so I did some research. External toolchains are not affected because when we copy the sysroot from the toolchain into STAGING_DIR, we do this: for link in $$(find $(STAGING_DIR) -type l); do \ target=$$(readlink $${link}) ; \ if [ "$${target}" == "$${target$(SHARP_SIGN)/}" ] ; then \ continue ; \ fi ; \ relpath="$(call relpath_prefix,$${target$(SHARP_SIGN)/})" ; \ echo "Fixing symlink $${link} from $${target} to $${relpath}$${target$(SHARP_SIGN)/}" ; \ ln -sf $${relpath}$${target$(SHARP_SIGN)/} $${link} ; \ done ; \ (from toolchain/helpers.mk:copy_toolchain_sysroot) This causes this to happen: >>> toolchain-external-bootlin 2021.11-1 Copying external toolchain sysroot to staging... Fixing symlink /home/thomas/projets/buildroot/output/host/x86_64-buildroot-linux-musl/sysroot/lib/ld-musl-x86_64.so.1 from /lib/libc.so to ../lib/libc.so So in the external toolchain, even if the symlink is broken, it gets fixed when we import the toolchain into STAGING_DIR. (Note: the external toolchain used here is a Bootlin toolchain, produced by Buildroot, but without the musl.mk fix, so it does have the bogus ld-musl-x86-64.so.1 -> /lib/libc.so link, but that gets fixed when we import the toolchain, as described above) Does that this seem like a good enough answer for the external toolchain case? If so, I can submit a v2 with an amended commit log. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Wed Oct 26 19:35:08 2022 From: christian at paral.in (Christian Stewart) Date: Wed, 26 Oct 2022 12:35:08 -0700 Subject: [Buildroot] [PATCH 1/1] package/go: security bump to 1.19.2 Message-ID: <20221026193508.482276-1-christian@paral.in> go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and regexp packages, as well as bug fixes to the compiler, the linker, the runtime, and the go/types package. https://go.dev/doc/devel/release#go1.19 https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved Signed-off-by: Christian Stewart --- package/go/go.hash | 2 +- package/go/go.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/go/go.hash b/package/go/go.hash index 657475adef..f944bd5304 100644 --- a/package/go/go.hash +++ b/package/go/go.hash @@ -1,3 +1,3 @@ # From https://go.dev/dl -sha256 27871baa490f3401414ad793fba49086f6c855b1c584385ed7771e1204c7e179 go1.19.1.src.tar.gz +sha256 2ce930d70a931de660fdaf271d70192793b1b240272645bf0275779f6704df6b go1.19.2.src.tar.gz sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 LICENSE diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..fe4d3a29a9 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -4,7 +4,7 @@ # ################################################################################ -GO_VERSION = 1.19.1 +GO_VERSION = 1.19.2 GO_SITE = https://storage.googleapis.com/golang GO_SOURCE = go$(GO_VERSION).src.tar.gz -- 2.38.1 From thomas.petazzoni at bootlin.com Wed Oct 26 19:36:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:36:05 +0200 Subject: [Buildroot] [PATCH] package/sentry-cli: fix build failure by bumping to 2.8.0 Message-ID: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> For a very long time, host-sentry-cli has been failing to build with: error[E0512]: cannot transmute between types of different sizes, or dependently-sized types --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 | 176 | mem::transmute::(v4); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: source type: `SocketAddrV4` (48 bits) = note: target type: `sockaddr_in` (128 bits) For more information about this error, try `rustc --explain E0512`. error: could not compile `socket2` due to previous error This socket2 create issue has apparently been fixed by upstream commit https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, as it removes/reworks the problematic code. This commit has been part of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 in version 0.3.2. The next version of sentry-cli that has moved to a more recent version of socket2 is 1.61.0, however this one also fails to build with: Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) warning: fields `schemes` and `name` are never read --> src/utils/xcode.rs:41:5 | 39 | pub struct XcodeProjectInfo { | ---------------- fields in this struct 40 | targets: Vec, 41 | schemes: Vec, | ^^^^^^^ 42 | configurations: Vec, 43 | name: String, | ^^^^ | = note: `#[warn(dead_code)]` on by default = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis warning: `sentry-cli` (bin "sentry-cli") generated 1 warning Finished release [optimized] target(s) in 55.05s Installing /home/buildroot/buildroot/output/host/bin/sentry-cli Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) So we just gave up, and went for building the very lastest sentry-cli version, 2.8.0, which apparently builds fine, at least in the configurations that used to previously fail. Yes, such a huge version bump is probably not ideal as a "minimal fix" to backport on our stable branches, but that's probably the best we can do without investing too much effort into this package that is otherwise poorly maintained in Buildroot, as nobody stepped up to address the issue even though it has been failing for months. Fixes: http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ Signed-off-by: Thomas Petazzoni --- package/sentry-cli/sentry-cli.hash | 2 +- package/sentry-cli/sentry-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sentry-cli/sentry-cli.hash b/package/sentry-cli/sentry-cli.hash index 73f818125f..3562199a82 100644 --- a/package/sentry-cli/sentry-cli.hash +++ b/package/sentry-cli/sentry-cli.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 d687336379fd96c4ee73f24bd062d31672bd7453af53311b72977be3c8c78fef sentry-cli-1.59.0.tar.gz +sha256 fa06f9f47782713eef8a4f10b674e2375b9439360ab34b37558ec4b30ec84861 sentry-cli-2.8.0.tar.gz sha256 9503def7b54ceb6e3cd182fd59bc05d3a30d7eae481e65aaba4b495133c83c14 LICENSE diff --git a/package/sentry-cli/sentry-cli.mk b/package/sentry-cli/sentry-cli.mk index 58f5f1e325..15094c2d01 100644 --- a/package/sentry-cli/sentry-cli.mk +++ b/package/sentry-cli/sentry-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -SENTRY_CLI_VERSION = 1.59.0 +SENTRY_CLI_VERSION = 2.8.0 SENTRY_CLI_SITE = $(call github,getsentry,sentry-cli,$(SENTRY_CLI_VERSION)) SENTRY_CLI_LICENSE = BSD-3-clause SENTRY_CLI_LICENSE_FILES = LICENSE -- 2.37.3 From fontaine.fabrice at gmail.com Wed Oct 26 19:36:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 21:36:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/expat: security bump to version 2.5.0 Message-ID: <20221026193658.245255-1-fontaine.fabrice@gmail.com> Expat 2.5.0 has been released earlier today. Most importantly, this release fixes CVE-2022-43680: a heap use-after-free vulnerability after overeager destruction of a shared DTD in function XML_ExternalEntityParserCreate in out-of-memory situations, with expected impact of denial of service or potentially arbitrary code execution. https://blog.hartwork.org/posts/expat-2-5-0-released https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Fabrice Fontaine --- package/expat/expat.hash | 8 ++++---- package/expat/expat.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/expat/expat.hash b/package/expat/expat.hash index 15e64a4dc8..c6c25aa3e0 100644 --- a/package/expat/expat.hash +++ b/package/expat/expat.hash @@ -1,7 +1,7 @@ -# From https://sourceforge.net/projects/expat/files/expat/2.4.9/ -md5 8d7fcf7d02d08bf79d9ae5c21cc72c03 expat-2.4.9.tar.xz -sha1 be91118bc495ce49b04a3fd0f27df2fb5a843e9b expat-2.4.9.tar.xz +# From https://sourceforge.net/projects/expat/files/expat/2.5.0/ +md5 ac6677b6d1b95d209ab697ce8b688704 expat-2.5.0.tar.xz +sha1 5178e13c1e34f4643d5118d5758babfe0e836fe2 expat-2.5.0.tar.xz # Locally calculated -sha256 6e8c0728fe5c7cd3f93a6acce43046c5e4736c7b4b68e032e9350daa0efc0354 expat-2.4.9.tar.xz +sha256 ef2420f0232c087801abf705e89ae65f6257df6b7931d37846a193ef2e8cdcbe expat-2.5.0.tar.xz sha256 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534 COPYING diff --git a/package/expat/expat.mk b/package/expat/expat.mk index 59854d0ee8..6f22024cc0 100644 --- a/package/expat/expat.mk +++ b/package/expat/expat.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXPAT_VERSION = 2.4.9 +EXPAT_VERSION = 2.5.0 EXPAT_SITE = http://downloads.sourceforge.net/project/expat/expat/$(EXPAT_VERSION) EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.xz EXPAT_INSTALL_STAGING = YES -- 2.35.1 From james.hilliard1 at gmail.com Wed Oct 26 19:44:01 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Wed, 26 Oct 2022 13:44:01 -0600 Subject: [Buildroot] [PATCH 1/1] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca Message-ID: <20221026194401.997459-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/glibc/glibc.hash | 2 +- package/glibc/glibc.mk | 2 +- package/localedef/localedef.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/glibc/glibc.hash b/package/glibc/glibc.hash index f5c0f1b175..16290461ac 100644 --- a/package/glibc/glibc.hash +++ b/package/glibc/glibc.hash @@ -1,5 +1,5 @@ # Locally calculated (fetched from Github) -sha256 596bee874d76bc6c5f62af142c9dd40bcb3625ea26975bbc52e552d40e864e54 glibc-2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3.tar.gz +sha256 51b946f6c8dddd2b0c9902f7792ecf594497da6b0cc8fb9246fa30f108cbb422 glibc-2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca.tar.gz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk index 84122db91f..bb7c9e9a05 100644 --- a/package/glibc/glibc.mk +++ b/package/glibc/glibc.mk @@ -7,7 +7,7 @@ # Generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- # When updating the version, please also update localedef -GLIBC_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +GLIBC_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca # Upstream doesn't officially provide an https download link. # There is one (https://sourceware.org/git/glibc.git) but it's not reliable, # sometimes the connection times out. So use an unofficial github mirror. diff --git a/package/localedef/localedef.mk b/package/localedef/localedef.mk index 987f7e8c65..05db7fa423 100644 --- a/package/localedef/localedef.mk +++ b/package/localedef/localedef.mk @@ -7,7 +7,7 @@ # Use the same VERSION and SITE as target glibc # As in glibc.mk, generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- -LOCALEDEF_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +LOCALEDEF_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca LOCALEDEF_SOURCE = glibc-$(LOCALEDEF_VERSION).tar.gz LOCALEDEF_SITE = $(call github,bminor,glibc,$(LOCALEDEF_VERSION)) HOST_LOCALEDEF_DL_SUBDIR = glibc -- 2.34.1 From thomas.petazzoni at bootlin.com Wed Oct 26 19:50:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:50:06 +0200 Subject: [Buildroot] [git commit] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca Message-ID: <20221026195017.CF7DD87133@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7630d0dde3b6284160bbe16474dad4fdc0b6a4fd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/glibc/glibc.hash | 2 +- package/glibc/glibc.mk | 2 +- package/localedef/localedef.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/glibc/glibc.hash b/package/glibc/glibc.hash index f5c0f1b175..16290461ac 100644 --- a/package/glibc/glibc.hash +++ b/package/glibc/glibc.hash @@ -1,5 +1,5 @@ # Locally calculated (fetched from Github) -sha256 596bee874d76bc6c5f62af142c9dd40bcb3625ea26975bbc52e552d40e864e54 glibc-2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3.tar.gz +sha256 51b946f6c8dddd2b0c9902f7792ecf594497da6b0cc8fb9246fa30f108cbb422 glibc-2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca.tar.gz # Hashes for license files sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk index 84122db91f..bb7c9e9a05 100644 --- a/package/glibc/glibc.mk +++ b/package/glibc/glibc.mk @@ -7,7 +7,7 @@ # Generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- # When updating the version, please also update localedef -GLIBC_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +GLIBC_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca # Upstream doesn't officially provide an https download link. # There is one (https://sourceware.org/git/glibc.git) but it's not reliable, # sometimes the connection times out. So use an unofficial github mirror. diff --git a/package/localedef/localedef.mk b/package/localedef/localedef.mk index 987f7e8c65..05db7fa423 100644 --- a/package/localedef/localedef.mk +++ b/package/localedef/localedef.mk @@ -7,7 +7,7 @@ # Use the same VERSION and SITE as target glibc # As in glibc.mk, generate version string using: # git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master | cut -d '-' -f 2- -LOCALEDEF_VERSION = 2.36-44-g2628500f5dff1dd99c49a09b418b3b1ea3a6b5d3 +LOCALEDEF_VERSION = 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca LOCALEDEF_SOURCE = glibc-$(LOCALEDEF_VERSION).tar.gz LOCALEDEF_SITE = $(call github,bminor,glibc,$(LOCALEDEF_VERSION)) HOST_LOCALEDEF_DL_SUBDIR = glibc From thomas.petazzoni at bootlin.com Wed Oct 26 19:49:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:49:56 +0200 Subject: [Buildroot] [git commit] package/expat: security bump to version 2.5.0 Message-ID: <20221026195017.C073687132@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=26ec7c4d029d281fc4f0d61e18fc83b91142d9a1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Expat 2.5.0 has been released earlier today. Most importantly, this release fixes CVE-2022-43680: a heap use-after-free vulnerability after overeager destruction of a shared DTD in function XML_ExternalEntityParserCreate in out-of-memory situations, with expected impact of denial of service or potentially arbitrary code execution. https://blog.hartwork.org/posts/expat-2-5-0-released https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/expat/expat.hash | 8 ++++---- package/expat/expat.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/expat/expat.hash b/package/expat/expat.hash index 15e64a4dc8..c6c25aa3e0 100644 --- a/package/expat/expat.hash +++ b/package/expat/expat.hash @@ -1,7 +1,7 @@ -# From https://sourceforge.net/projects/expat/files/expat/2.4.9/ -md5 8d7fcf7d02d08bf79d9ae5c21cc72c03 expat-2.4.9.tar.xz -sha1 be91118bc495ce49b04a3fd0f27df2fb5a843e9b expat-2.4.9.tar.xz +# From https://sourceforge.net/projects/expat/files/expat/2.5.0/ +md5 ac6677b6d1b95d209ab697ce8b688704 expat-2.5.0.tar.xz +sha1 5178e13c1e34f4643d5118d5758babfe0e836fe2 expat-2.5.0.tar.xz # Locally calculated -sha256 6e8c0728fe5c7cd3f93a6acce43046c5e4736c7b4b68e032e9350daa0efc0354 expat-2.4.9.tar.xz +sha256 ef2420f0232c087801abf705e89ae65f6257df6b7931d37846a193ef2e8cdcbe expat-2.5.0.tar.xz sha256 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534 COPYING diff --git a/package/expat/expat.mk b/package/expat/expat.mk index 59854d0ee8..6f22024cc0 100644 --- a/package/expat/expat.mk +++ b/package/expat/expat.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXPAT_VERSION = 2.4.9 +EXPAT_VERSION = 2.5.0 EXPAT_SITE = http://downloads.sourceforge.net/project/expat/expat/$(EXPAT_VERSION) EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.xz EXPAT_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Wed Oct 26 19:49:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:49:53 +0200 Subject: [Buildroot] [git commit] package/go: security bump to 1.19.2 Message-ID: <20221026195017.B082687131@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ba57ca36b90371d35cd1421aec16e63aa3f43dbf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and regexp packages, as well as bug fixes to the compiler, the linker, the runtime, and the go/types package. https://go.dev/doc/devel/release#go1.19 https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- package/go/go.hash | 2 +- package/go/go.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/go/go.hash b/package/go/go.hash index 657475adef..f944bd5304 100644 --- a/package/go/go.hash +++ b/package/go/go.hash @@ -1,3 +1,3 @@ # From https://go.dev/dl -sha256 27871baa490f3401414ad793fba49086f6c855b1c584385ed7771e1204c7e179 go1.19.1.src.tar.gz +sha256 2ce930d70a931de660fdaf271d70192793b1b240272645bf0275779f6704df6b go1.19.2.src.tar.gz sha256 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067 LICENSE diff --git a/package/go/go.mk b/package/go/go.mk index 9f0fbbde00..fe4d3a29a9 100644 --- a/package/go/go.mk +++ b/package/go/go.mk @@ -4,7 +4,7 @@ # ################################################################################ -GO_VERSION = 1.19.1 +GO_VERSION = 1.19.2 GO_SITE = https://storage.googleapis.com/golang GO_SOURCE = go$(GO_VERSION).src.tar.gz From thomas.petazzoni at bootlin.com Wed Oct 26 19:50:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:50:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/go: security bump to 1.19.2 In-Reply-To: <20221026193508.482276-1-christian@paral.in> References: <20221026193508.482276-1-christian@paral.in> Message-ID: <20221026215058.1e623bb4@windsurf> On Wed, 26 Oct 2022 12:35:08 -0700 Christian Stewart via buildroot wrote: > go1.19.2 includes security fixes to the archive/tar, net/http/httputil, and > regexp packages, as well as bug fixes to the compiler, the linker, the runtime, > and the go/types package. > > https://go.dev/doc/devel/release#go1.19 > https://github.com/golang/go/issues?q=milestone%3AGo1.19.2+label%3ACherryPickApproved > > Signed-off-by: Christian Stewart > --- > package/go/go.hash | 2 +- > package/go/go.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/expat: security bump to version 2.5.0 In-Reply-To: <20221026193658.245255-1-fontaine.fabrice@gmail.com> References: <20221026193658.245255-1-fontaine.fabrice@gmail.com> Message-ID: <20221026215104.238043e7@windsurf> On Wed, 26 Oct 2022 21:36:58 +0200 Fabrice Fontaine wrote: > Expat 2.5.0 has been released earlier today. Most importantly, this > release fixes CVE-2022-43680: a heap use-after-free vulnerability after > overeager destruction of a shared DTD in function > XML_ExternalEntityParserCreate in out-of-memory situations, with > expected impact of denial of service or potentially arbitrary code > execution. > > https://blog.hartwork.org/posts/expat-2-5-0-released > https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes > > Signed-off-by: Fabrice Fontaine > --- > package/expat/expat.hash | 8 ++++---- > package/expat/expat.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/{glibc, localedef}: bump to version 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca In-Reply-To: <20221026194401.997459-1-james.hilliard1@gmail.com> References: <20221026194401.997459-1-james.hilliard1@gmail.com> Message-ID: <20221026215107.62e60ab2@windsurf> On Wed, 26 Oct 2022 13:44:01 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/glibc/glibc.hash | 2 +- > package/glibc/glibc.mk | 2 +- > package/localedef/localedef.mk | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:20 +0200 Subject: [Buildroot] [git commit] package/rtl8723bu: disable package for s390x architecture Message-ID: <20221026195154.9C21087167@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bff3a804024e1931affcbf13453761afd3c767c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8723bu/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723bu/Config.in b/package/rtl8723bu/Config.in index 266a794a7d..7c624fc4d4 100644 --- a/package/rtl8723bu/Config.in +++ b/package/rtl8723bu/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723BU bool "rtl8723bu" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bu wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723BU https://github.com/lwfinger/rtl8723bu comment "rtl8723bu needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:17 +0200 Subject: [Buildroot] [git commit] package/rtl8189es: disable package for s390x architecture Message-ID: <20221026195154.87C9787165@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=682224d6f6e80e78ff61f3545a7ae5d7a15ba887 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Fixes: http://autobuild.buildroot.net/results/693053491ba61edcff0f75a4f30c13958e7e12ce/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8189es/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189es/Config.in b/package/rtl8189es/Config.in index 2e3474e5e1..11dd225436 100644 --- a/package/rtl8189es/Config.in +++ b/package/rtl8189es/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189ES bool "rtl8189es" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189es. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189ES https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189es needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:22 +0200 Subject: [Buildroot] [git commit] package/rtl8723ds: disable package for s390x architecture Message-ID: <20221026195154.A655287168@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5835a64d3648b4f3a012d57a01775e7eeb1418b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8723ds/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8723ds/Config.in b/package/rtl8723ds/Config.in index ef7dd39a68..e5123a2aae 100644 --- a/package/rtl8723ds/Config.in +++ b/package/rtl8723ds/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8723DS bool "rtl8723ds" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8723bs wifi driver @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8723DS https://github.com/lwfinger/rtl8723ds comment "rtl8723ds needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:27 +0200 Subject: [Buildroot] [git commit] package/wilc-driver: disable package for s390x architecture Message-ID: <20221026195154.C8C7687167@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9c2dec7a2ba990233784f0e6baf1cd67d9220f9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Reviewed-by: Kris Bahnsen Signed-off-by: Thomas Petazzoni --- package/wilc-driver/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/wilc-driver/Config.in b/package/wilc-driver/Config.in index 7ed062bb66..7f970bd38b 100644 --- a/package/wilc-driver/Config.in +++ b/package/wilc-driver/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_WILC_DRIVER bool "wilc kernel module" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help External kernel module for WILC1000/3000 devices. @@ -59,4 +60,5 @@ endif endif comment "wilc kernel module needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:19 +0200 Subject: [Buildroot] [git commit] package/rtl8189fs: disable package for s390x architecture Message-ID: <20221026195154.9166587166@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=33400378d05cf078314ed0fa9612fa5ab13f7fa6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8189fs/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8189fs/Config.in b/package/rtl8189fs/Config.in index ae69b79235..78eeed1a4f 100644 --- a/package/rtl8189fs/Config.in +++ b/package/rtl8189fs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_RTL8189FS bool "rtl8189fs" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help Wireless driver rtl8189fs. @@ -7,4 +8,5 @@ config BR2_PACKAGE_RTL8189FS https://github.com/jwrdegoede/rtl8189ES_linux.git comment "rtl8189fs needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:23 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:23 +0200 Subject: [Buildroot] [git commit] package/rtl8812au-aircrack-ng: disable package for s390x architecture Message-ID: <20221026195154.B0B3F87165@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=895692594f9aac04dfede06067eca794533869d8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8812au-aircrack-ng/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8812au-aircrack-ng/Config.in b/package/rtl8812au-aircrack-ng/Config.in index 70cbd15221..d903ab2b3f 100644 --- a/package/rtl8812au-aircrack-ng/Config.in +++ b/package/rtl8812au-aircrack-ng/Config.in @@ -1,8 +1,10 @@ comment "rtl8812au-aircrack-ng needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8812AU_AIRCRACK_NG bool "rtl8812au-aircrack-ng" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8812au wifi driver (aircrack-ng repository) From thomas.petazzoni at bootlin.com Wed Oct 26 19:51:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:51:25 +0200 Subject: [Buildroot] [git commit] package/rtl8821au: disable package for s390x architecture Message-ID: <20221026195154.BE9D687166@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1e18cc291bbb1c16401abb1b2b661e4e150092f3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master s390x doesn't support CONFIG_WIRELESS in Linux so let's disable this package for this architecture. Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/rtl8821au/Config.in | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/rtl8821au/Config.in b/package/rtl8821au/Config.in index 87c191b22a..3d7bbf643d 100644 --- a/package/rtl8821au/Config.in +++ b/package/rtl8821au/Config.in @@ -1,8 +1,10 @@ comment "rtl8821au needs a Linux kernel to be built" + depends on !BR2_s390x depends on !BR2_LINUX_KERNEL config BR2_PACKAGE_RTL8821AU bool "rtl8821au" + depends on !BR2_s390x depends on BR2_LINUX_KERNEL help rtl8821au wifi driver From thomas.petazzoni at bootlin.com Wed Oct 26 19:53:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 21:53:24 +0200 Subject: [Buildroot] [PATCH 0/7] Disable packages with CONFIG_WIRELESS on s390x In-Reply-To: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> References: <20221026132634.999254-1-giulio.benetti@benettiengineering.com> Message-ID: <20221026215324.63c63c41@windsurf> On Wed, 26 Oct 2022 15:26:27 +0200 Giulio Benetti wrote: > Linux s390x doesn't support CONFIG_WIRELESS so this patchset disable > all packages with Linux CONFIG_WIRELESS for s390x architecture. > > Giulio Benetti (7): > package/rtl8189es: disable package for s390x architecture > package/rtl8189fs: disable package for s390x architecture > package/rtl8723bu: disable package for s390x architecture > package/rtl8723ds: disable package for s390x architecture > package/rtl8812au-aircrack-ng: disable package for s390x architecture > package/rtl8821au: disable package for s390x architecture > package/wilc-driver: disable package for s390x architecture When I saw this, initially I was a bit "meh", and wondered if some more generic mechanism wouldn't be more relevant, like a BR2_LINUX_KERNEL_SUPPORTS_WIRELESS or something like this. But then I thought that this is the first case for which we have a situation like that, so we're not sure what other cases will look like. So for now, I applied your patches as-is, and we can revisit later if we identify similar issues that would encourage us in finding a more generic solution to the problem. So: all patches applied as-is. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:00:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:00:09 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-2-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> Message-ID: <20221026220009.12ec01ee@windsurf> Hello Tobias, Thanks for this patch! On Thu, 20 Oct 2022 16:14:09 +0200 Tobias Waldekranz wrote: > Add upstream patch that sources the library path (lib vs. lib64) from > the compiler rather than from uname(1). Could you copy/paste the details of the build failure that was occurring, and provide details on the context it was occurring? Indeed, when looking at the results of our autobuilders in terms of failures when building libbpf, I don't see anything relevant: http://autobuild.buildroot.net/?reason=libbpf% In recent months, we only had build failures on the S390x architecture, that don't seem related to this. > ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > > diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > new file mode 100644 > index 0000000000..3730b2fa41 Please put the patch directly in package/libbpf/. Putting it in a 1.0.1/ sub-directory is not needed. We only do that for packages where multiple versions are used (like package/gcc, package/binutils for example). > --- /dev/null > +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch > @@ -0,0 +1,37 @@ > +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 > +From: Tobias Waldekranz > +Date: Fri, 14 Oct 2022 21:14:14 +0200 > +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets > + > +Determining the correct library installation path (lib vs. lib64) > +using uname(1) breaks in cross compilation scenarios where word widths > +differ between the host and target system. > + > +Instead, source the information from the compilers '-dumpmachine' > +option (supported by both GCC and Clang). > + > +We call this the "host" architecture, using the same nomenclature as > +Autotools (--host configure option). > + Please add: Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 > +Signed-off-by: Tobias Waldekranz Could you send a v2 with those changes? I was about to do the changes myself, but I really don't know which build failure this patch is fixing so I couldn't fix that up myself in the commit log. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:08:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:08:25 +0200 Subject: [Buildroot] [git commit] package/libbpf: remove architecture restrictions Message-ID: <20221026200948.760C28716D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=51ecbe500f1bce6725ea78c8193b9efae5da2e6f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since Buildroot commit 3145adfb69ba ("package/libbpf: needs headers >= 4.13"), libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. Commit f693354c30bd ("package/libbpf: add BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM, but these architecture dependencies are no longer needed due to the bump on the kernel headers version requirement. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- package/libbpf/Config.in | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in index b3d6e44c6a..1465366c9e 100644 --- a/package/libbpf/Config.in +++ b/package/libbpf/Config.in @@ -1,15 +1,5 @@ -config BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS - bool - # see src/bpf.c - default y if BR2_arc - default y if BR2_aarch64 || BR2_aarch64_be - default y if BR2_i386 || BR2_x86_64 - default y if BR2_sparc || BR2_sparc64 - default y if BR2_s390x - config BR2_PACKAGE_LIBBPF bool "libbpf" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils @@ -27,7 +17,6 @@ config BR2_PACKAGE_LIBBPF https://github.com/libbpf/libbpf comment "libbpf needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" - depends on BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ From thomas.petazzoni at bootlin.com Wed Oct 26 20:10:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:10:28 +0200 Subject: [Buildroot] [PATCH 2/4] package/libbpf: remove architecture restrictions In-Reply-To: <20221020141412.346992-3-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-3-tobias@waldekranz.com> Message-ID: <20221026221028.7e11ea80@windsurf> Hello Tobias, On Thu, 20 Oct 2022 16:14:10 +0200 Tobias Waldekranz wrote: > Since 3145adfb69ba, libbpf depends on Linux headers >= 4.13. This > requirement renders the explicit list of supported architectures, > previously added in f693354c30bd overly restrictive, as the syscall > number for bpf(2) has been defined since Linux 3.18. > > f693354c30bd was introduced to fix a build issue where a toolchain > using very old kernel headers (3.13) failed to build libbpf for ARM. > > Signed-off-by: Tobias Waldekranz > --- > package/libbpf/Config.in | 11 ----------- > 1 file changed, 11 deletions(-) It is not easy to check if the bpf syscall was indeed wired up in all architectures we support, but let's assume it's the case as of 4.13 :-) I have applied, with a slightly improved commit log: package/libbpf: remove architecture restrictions Since Buildroot commit 3145adfb69ba ("package/libbpf: needs headers >= 4.13"), libbpf depends on Linux headers >= 4.13. This requirement renders the explicit list of supported architectures, previously added in f693354c30bd overly restrictive, as the syscall number for bpf(2) has been defined since Linux 3.18. Commit f693354c30bd ("package/libbpf: add BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue where a toolchain using very old kernel headers (3.13) failed to build libbpf for ARM, but these architecture dependencies are no longer needed due to the bump on the kernel headers version requirement. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Wed Oct 26 20:15:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:15:28 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221020141412.346992-4-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> Message-ID: <20221026221528.393a1d39@windsurf> Hello Tobias, On Thu, 20 Oct 2022 16:14:11 +0200 Tobias Waldekranz wrote: > This makes it obvious that the comment is just the negation of the > dependency requirements. It also makes it easier for other packages to > depend on libbpf. > > Signed-off-by: Tobias Waldekranz > --- > package/libbpf/Config.in | 15 ++++++++------- > 1 file changed, 8 insertions(+), 7 deletions(-) > > diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in > index 1465366c9e..7e816c193d 100644 > --- a/package/libbpf/Config.in > +++ b/package/libbpf/Config.in > @@ -1,11 +1,16 @@ > -config BR2_PACKAGE_LIBBPF > - bool "libbpf" > +config BR2_PACKAGE_LIBBPF_SUPPORTED > + bool > depends on BR2_TOOLCHAIN_HAS_SYNC_4 > depends on BR2_USE_WCHAR # elfutils > depends on !BR2_STATIC_LIBS # elfutils > depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 > depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils I'm afraid, but we don't do this in Buildroot, in none of our packages. I think our rationale is that by duplicating these dependencies, it is easier to maintain the Config.in comment in the packages that select BR2_PACKAGE_LIBBPF. I agree it's a very arbitrary choice, but we really strongly want things to be consistent between all Buildroot packages, so we cannot change this for just one package. If we want to change this, it needs to be discussed (advantages vs. drawbacks), then the documentation needs to be updated, and all packages changed. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Wed Oct 26 20:17:36 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 22:17:36 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: fix build without asciidoc Message-ID: <20221026201736.327835-1-fontaine.fabrice@gmail.com> Set ac_cv_prog_A2X to disable build of documentation and avoid the following build failure without a working a2x raised since at least bump to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') Fixes: - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef Signed-off-by: Fabrice Fontaine --- package/usbguard/usbguard.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index ca539a55f5..4e906e8b87 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -10,6 +10,7 @@ USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE USBGUARD_CPE_ID_VENDOR = usbguard_project USBGUARD_SELINUX_MODULES = usbguard +USBGUARD_CONF_ENV = ac_cv_prog_A2X="" USBGUARD_CONF_OPTS = \ --with-bundled-catch \ --with-bundled-pegtl \ -- 2.35.1 From fontaine.fabrice at gmail.com Wed Oct 26 20:39:41 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 22:39:41 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: fix build without threads Message-ID: <20221026203941.555393-1-fontaine.fabrice@gmail.com> Fix the following build failure without threads raised since bump to version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': Settings.cpp:1281:9: error: break statement not within loop or switch 1281 | break; | ^~~~~ Fixes: - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 Signed-off-by: Fabrice Fontaine --- ...fix-single-threaded-compile-breakage.patch | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 package/iperf/0001-fix-single-threaded-compile-breakage.patch diff --git a/package/iperf/0001-fix-single-threaded-compile-breakage.patch b/package/iperf/0001-fix-single-threaded-compile-breakage.patch new file mode 100644 index 0000000000..85baf76ea4 --- /dev/null +++ b/package/iperf/0001-fix-single-threaded-compile-breakage.patch @@ -0,0 +1,32 @@ +From 6405b7a005bb2364466b56f480d50af0be423d76 Mon Sep 17 00:00:00 2001 +From: Robert McMahon +Date: Tue, 27 Sep 2022 20:31:04 -0700 +Subject: [PATCH] fix single threaded compile breakage + +[Retrieved (and backported) from: +https://sourceforge.net/p/iperf2/code/ci/6405b7a005bb2364466b56f480d50af0be423d76] +Signed-off-by: Fabrice Fontaine +--- + include/version.h | 2 +- + src/Settings.cpp | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/Settings.cpp b/src/Settings.cpp +index aac1b5f..fc5a181 100644 +--- a/src/Settings.cpp ++++ b/src/Settings.cpp +@@ -1160,10 +1160,10 @@ void Settings_Interpret (char option, const char *optarg, struct thread_Settings + delete [] tmp; + } + } ++ } + #else + fprintf(stderr, "bounceback-congest option requires a platform that supports threads\n"); + #endif +- } + } + if (bouncebackdelaystart) { + bouncebackdelaystart = 0; +-- +2.35.1 + -- 2.35.1 From tobias at waldekranz.com Wed Oct 26 20:59:13 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Wed, 26 Oct 2022 22:59:13 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221026220009.12ec01ee@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> <20221026220009.12ec01ee@windsurf> Message-ID: <878rl29u8u.fsf@waldekranz.com> On ons, okt 26, 2022 at 22:00, Thomas Petazzoni via buildroot wrote: > Hello Tobias, > > Thanks for this patch! Thank you for reviewing! > On Thu, 20 Oct 2022 16:14:09 +0200 > Tobias Waldekranz wrote: > >> Add upstream patch that sources the library path (lib vs. lib64) from >> the compiler rather than from uname(1). > > Could you copy/paste the details of the build failure that was > occurring, and provide details on the context it was occurring? > > Indeed, when looking at the results of our autobuilders in terms of > failures when building libbpf, I don't see anything relevant: > > http://autobuild.buildroot.net/?reason=libbpf% > > In recent months, we only had build failures on the S390x architecture, > that don't seem related to this. Sorry, I should have explained the issue better: Building libbpf "works" without this patch, so I'm not surprised that there are no autobuild errors. It is just that shared objects and pkg-config files are always (assuming a 64-bit build system) installed to /lib64 in target & staging. If you then try to build something that _depends_ on libbpf, pkg-config won't be able to find it since /lib64 is not in its path. Hence why I stumbled upon this - kmemd was the first package to depend on libbpf. Here's a log when building kmemd for 32-bit PowerPC without this patch: ~/src/buildroot/x-ppc$ make kmemd >>> kmemd 1.0.0 Configuring (cd /home/wkz/src/buildroot/x-ppc/build/kmemd-1.0.0/ && rm -rf config.cache && PATH="/home/wkz/src/buildroot/x-ppc/host/bin:/home/wkz/src/buildroot/x-ppc/host/sbin:/home/wkz/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-ar" AS="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-as" LD="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-ld" NM="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-nm" CC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc" GCC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc" CPP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-cpp" CXX="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-g++" FC="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gfortran" F77="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gfortran" RANLIB="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc-ranlib" READELF="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-readelf" STRIP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-strip" OBJCOPY="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/wkz/src/buildroot/x-ppc/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/wkz/src/buildroot/x-ppc/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/wkz/src/buildroot/x-ppc/host/include" LDFLAGS_FOR_BUILD="-L/home/wkz/src/buildroot/x-ppc/host/lib -Wl,-rpath,/home/wkz/src/buildroot/x-ppc/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/wkz/src/buildroot/x-ppc/host/bin/pkg-config" STAGING_DIR="/home/wkz/src/buildroot/x-ppc/host/powerpc-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-gnu --host=powerpc-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking for powerpc-buildroot-linux-gnu-gcc... /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc accepts -g... yes checking for /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc option to enable C11 features... none needed checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-gnu-strip... /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-strip checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc... none checking whether make supports nested variables... (cached) yes checking for powerpc-buildroot-linux-gnu-gcc... (cached) /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc accepts -g... (cached) yes checking for /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc option to enable C11 features... (cached) none needed checking whether /home/wkz/src/buildroot/x-ppc/host/bin/powerpc-linux-gcc understands -c and -o together... (cached) yes checking pkg-config is at least version 0.9.0... yes checking for libbpf >= 1.0.0... no configure: error: Package requirements (libbpf >= 1.0.0) were not met: Package 'libbpf', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables libbpf_CFLAGS and libbpf_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. make[1]: *** [package/pkg-generic.mk:283: /home/wkz/src/buildroot/x-ppc/build/kmemd-1.0.0/.stamp_configured] Error 1 make: *** [Makefile:23: _all] Error 2 And this is the source of the problem: ~/src/buildroot/x-ppc$ find host/powerpc-buildroot-linux-gnu/sysroot/ -name libbpf.pc host/powerpc-buildroot-linux-gnu/sysroot/usr/lib64/pkgconfig/libbpf.pc >> ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> >> diff --git a/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> new file mode 100644 >> index 0000000000..3730b2fa41 > > Please put the patch directly in package/libbpf/. Putting it in a > 1.0.1/ sub-directory is not needed. We only do that for packages where > multiple versions are used (like package/gcc, package/binutils for > example). Will fix in v2. >> --- /dev/null >> +++ b/package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch >> @@ -0,0 +1,37 @@ >> +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 >> +From: Tobias Waldekranz >> +Date: Fri, 14 Oct 2022 21:14:14 +0200 >> +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets >> + >> +Determining the correct library installation path (lib vs. lib64) >> +using uname(1) breaks in cross compilation scenarios where word widths >> +differ between the host and target system. >> + >> +Instead, source the information from the compilers '-dumpmachine' >> +option (supported by both GCC and Clang). >> + >> +We call this the "host" architecture, using the same nomenclature as >> +Autotools (--host configure option). >> + > > Please add: > > Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Sure thing. >> +Signed-off-by: Tobias Waldekranz > > Could you send a v2 with those changes? I was about to do the changes > myself, but I really don't know which build failure this patch is > fixing so I couldn't fix that up myself in the commit log. > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From fontaine.fabrice at gmail.com Wed Oct 26 21:03:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:03:33 +0200 Subject: [Buildroot] [PATCH 1/2] package/shapelib: add SHAPELIB_CPE_ID_VENDOR Message-ID: <20221026210334.565454-1-fontaine.fabrice@gmail.com> cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib Signed-off-by: Fabrice Fontaine --- package/shapelib/shapelib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index bedd15dc35..52f9584e19 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -8,6 +8,7 @@ SHAPELIB_VERSION = 1.5.0 SHAPELIB_SITE = http://download.osgeo.org/shapelib SHAPELIB_LICENSE = MIT or LGPL-2.0 SHAPELIB_LICENSE_FILES = web/license.html COPYING +SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Wed Oct 26 21:03:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:03:34 +0200 Subject: [Buildroot] [PATCH 2/2] package/shapelib: fix CVE-2022-0699 In-Reply-To: <20221026210334.565454-1-fontaine.fabrice@gmail.com> References: <20221026210334.565454-1-fontaine.fabrice@gmail.com> Message-ID: <20221026210334.565454-2-fontaine.fabrice@gmail.com> A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0 and older releases. This issue may allow an attacker to cause a denial of service or have other unspecified impact via control over malloc. Signed-off-by: Fabrice Fontaine --- ...Remove-double-free-in-contrib-shpsrt.patch | 26 +++++++++++++++++++ package/shapelib/shapelib.mk | 3 +++ 2 files changed, 29 insertions(+) create mode 100644 package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch diff --git a/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch new file mode 100644 index 0000000000..a565874b8c --- /dev/null +++ b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch @@ -0,0 +1,26 @@ +From c75b9281a5b9452d92e1682bdfe6019a13ed819f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Albin=20Eldst=C3=A5l-Ahrens?= +Date: Mon, 3 Jan 2022 12:34:41 +0100 +Subject: [PATCH] Remove double free() in contrib/shpsrt, issue #39 + +This fixes issue #39 + +[Retrieved from: +https://github.com/OSGeo/shapelib/commit/c75b9281a5b9452d92e1682bdfe6019a13ed819f] +Signed-off-by: Fabrice Fontaine +--- + contrib/shpsort.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/contrib/shpsort.c b/contrib/shpsort.c +index e21e9e0..920cd8c 100644 +--- a/contrib/shpsort.c ++++ b/contrib/shpsort.c +@@ -113,7 +113,6 @@ static char ** split(const char *arg, const char *delim) { + free(result[--i]); + } + free(result); +- free(copy); + return NULL; + } + result = tmp; diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index 52f9584e19..37d2d9ae64 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -11,4 +11,7 @@ SHAPELIB_LICENSE_FILES = web/license.html COPYING SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES +# 0001-Remove-double-free-in-contrib-shpsrt.patch +SHAPELIB_IGNORE_CVES += CVE-2022-0699 + $(eval $(autotools-package)) -- 2.35.1 From alistair23 at gmail.com Wed Oct 26 21:03:36 2022 From: alistair23 at gmail.com (Alistair Francis) Date: Thu, 27 Oct 2022 07:03:36 +1000 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Message-ID: On Thu, Oct 27, 2022 at 4:35 AM Thomas Petazzoni via buildroot wrote: > > Since glibc 2.33 (upstream commit > 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed > to build glibc for RISC-V 32-bit. Indeed > sysdeps/unix/sysv/linux/riscv/configure.ac contains: > > if test $libc_cv_riscv_int_abi = ilp32; then > arch_minimum_kernel=5.4.0 > fi > > In order to take into account this dependency, we add the appropriate > logic in package/glibc/Config.in and > toolchain/toolchain-buildroot/Config.in. > > This change means that if headers < 5.4.0 are selected, then no C > library at all will be available for RISC-V 32-bit, as glibc is the > only C library supporting RISC-V 32-bit currently. However, thanks to > the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the > choice...endchoice for the C library selection will not be empty, > allowing the user to see the Config.in comment explaining why glibc > can't be selected. > > Therefore, technically this commit does prevent from creating a > configuration with RISC-V 32-bit and headers < 5.4.0, but it will have > BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by > package/Makefile.in, which aborts the build early on pointing out that > the configuration is invalid. > > Fixes: > > http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ > > Signed-off-by: Thomas Petazzoni Reviewed-by: Alistair Francis Alistair > --- > package/glibc/Config.in | 1 + > toolchain/toolchain-buildroot/Config.in | 4 ++++ > 2 files changed, 5 insertions(+) > > diff --git a/package/glibc/Config.in b/package/glibc/Config.in > index b63f99b0b4..71c50504ac 100644 > --- a/package/glibc/Config.in > +++ b/package/glibc/Config.in > @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 26d731d976..64f7892f98 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" > depends on BR2_RISCV_64 > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 > > +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" > + depends on BR2_RISCV_32 > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 > + > comment "glibc on ARC needs a toolchain w/ headers >= 5.1" > depends on BR2_arc > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From tobias at waldekranz.com Wed Oct 26 21:14:08 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Wed, 26 Oct 2022 23:14:08 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <20221026221528.393a1d39@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> <20221026221528.393a1d39@windsurf> Message-ID: <875yg69tjz.fsf@waldekranz.com> On ons, okt 26, 2022 at 22:15, Thomas Petazzoni via buildroot wrote: > Hello Tobias, > > On Thu, 20 Oct 2022 16:14:11 +0200 > Tobias Waldekranz wrote: > >> This makes it obvious that the comment is just the negation of the >> dependency requirements. It also makes it easier for other packages to >> depend on libbpf. >> >> Signed-off-by: Tobias Waldekranz >> --- >> package/libbpf/Config.in | 15 ++++++++------- >> 1 file changed, 8 insertions(+), 7 deletions(-) >> >> diff --git a/package/libbpf/Config.in b/package/libbpf/Config.in >> index 1465366c9e..7e816c193d 100644 >> --- a/package/libbpf/Config.in >> +++ b/package/libbpf/Config.in >> @@ -1,11 +1,16 @@ >> -config BR2_PACKAGE_LIBBPF >> - bool "libbpf" >> +config BR2_PACKAGE_LIBBPF_SUPPORTED >> + bool >> depends on BR2_TOOLCHAIN_HAS_SYNC_4 >> depends on BR2_USE_WCHAR # elfutils >> depends on !BR2_STATIC_LIBS # elfutils >> depends on BR2_TOOLCHAIN_HAS_THREADS # elfutils >> depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 >> depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils > > I'm afraid, but we don't do this in Buildroot, in none of our packages. > I think our rationale is that by duplicating these dependencies, it is > easier to maintain the Config.in comment in the packages that select > BR2_PACKAGE_LIBBPF. Fair enough, I will drop this change in v2 and copy the information to kmemd.mk instead. Is there a convention for how to comment dependencies that stem from grandparent packages? E.g. v2, kmemd.mk will declare: depends on BR2_USE_WCHAR # as libbpf requires it, but only because of its dependency on elfutils. So what is the proper in this case? "elfutils" or "libbpf"? Or maybe something like "elfutils->libbpf"? > I agree it's a very arbitrary choice, but we really strongly want > things to be consistent between all Buildroot packages, so we cannot > change this for just one package. If we want to change this, it needs > to be discussed (advantages vs. drawbacks), then the documentation > needs to be updated, and all packages changed. Completely understand. As a Buildroot user, I really appreciate that consistency! > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From mail at dbrgn.ch Wed Oct 26 21:09:17 2022 From: mail at dbrgn.ch (Danilo) Date: Wed, 26 Oct 2022 23:09:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.1 Message-ID: <20221026230917.5092886c@c3po> Signed-off-by: Danilo Bargen --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..1d9eb7bf25 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 90690d3a6e2f6c7444c281865bd5b0787e0afa599f06b52b4283bea4541e1e77 tealdeer-1.6.1.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..aabfe2983c 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.1 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT -- 2.38.1 From mail at dbrgn.ch Wed Oct 26 21:10:51 2022 From: mail at dbrgn.ch (Danilo) Date: Wed, 26 Oct 2022 23:10:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.0 In-Reply-To: <20221012002101.02c1f4bf@c3po> References: <20221012002101.02c1f4bf@c3po> Message-ID: <5ed339df-22c9-4d89-917b-87f7605a084e@app.fastmail.com> This patch can be ignored, it has been superseded by the patch that bumps to version 1.6.1. Danilo From fontaine.fabrice at gmail.com Wed Oct 26 21:21:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:21:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/faad2: bump to version 2.10.1 Message-ID: <20221026212122.592457-1-fontaine.fabrice@gmail.com> https://github.com/knik0/faad2/releases/tag/2.10.1 Signed-off-by: Fabrice Fontaine --- package/faad2/faad2.hash | 2 +- package/faad2/faad2.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/faad2/faad2.hash b/package/faad2/faad2.hash index 2eb11d73aa..3a9c36df00 100644 --- a/package/faad2/faad2.hash +++ b/package/faad2/faad2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0c6d9636c96f95c7d736f097d418829ced8ec6dbd899cc6cc82b728480a84bfb faad2-2.10.0.tar.gz +sha256 4c16c71295ca0cbf7c3dfe98eb11d8fa8d0ac3042e41604cfd6cc11a408cf264 faad2-2.10.1.tar.gz sha256 d3baf3a54943cf12a994c85867a18dec84f810901b2f2878ddfd77efcc3c150f COPYING diff --git a/package/faad2/faad2.mk b/package/faad2/faad2.mk index d085c814bd..eecab35af8 100644 --- a/package/faad2/faad2.mk +++ b/package/faad2/faad2.mk @@ -4,8 +4,8 @@ # ################################################################################ -FAAD2_VERSION = 2.10.0 -FAAD2_SITE = $(call github,knik0,faad2,$(subst .,_,$(FAAD2_VERSION))) +FAAD2_VERSION = 2.10.1 +FAAD2_SITE = $(call github,knik0,faad2,$(FAAD2_VERSION)) FAAD2_LICENSE = GPL-2.0 FAAD2_LICENSE_FILES = COPYING FAAD2_CPE_ID_VENDOR = audiocoding -- 2.35.1 From thomas.petazzoni at bootlin.com Wed Oct 26 21:28:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 23:28:05 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221026220009.12ec01ee@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> <20221026220009.12ec01ee@windsurf> Message-ID: <20221026232805.29f33605@windsurf> On Wed, 26 Oct 2022 22:00:09 +0200 Thomas Petazzoni wrote: > Could you copy/paste the details of the build failure that was > occurring, and provide details on the context it was occurring? By building kmemd, I figured out what the issue was, and it's now clear. I have applied your PATCH 1/4 with an extended explanation. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Wed Oct 26 21:40:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Wed, 26 Oct 2022 23:40:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/iproute2: bump to version 6.0.0 Message-ID: <20221026214055.625267-1-fontaine.fabrice@gmail.com> Drop patches (already in version) Signed-off-by: Fabrice Fontaine --- .../0001-ipstats-Add-param.h-for-musl.patch | 29 ---------------- .../0002-ipstats-add-missing-headers.patch | 33 ------------------- ...-_GNU_SOURCE-when-checking-for-setns.patch | 29 ---------------- package/iproute2/iproute2.hash | 2 +- package/iproute2/iproute2.mk | 2 +- 5 files changed, 2 insertions(+), 93 deletions(-) delete mode 100644 package/iproute2/0001-ipstats-Add-param.h-for-musl.patch delete mode 100644 package/iproute2/0002-ipstats-add-missing-headers.patch delete mode 100644 package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch diff --git a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch b/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch deleted file mode 100644 index db6982ab8b..0000000000 --- a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cf6b60c504d4be5e1df2b2745e55d677967831d0 Mon Sep 17 00:00:00 2001 -From: Changhyeok Bae -Date: Tue, 9 Aug 2022 04:01:05 +0000 -Subject: [PATCH] ipstats: Add param.h for musl - -Fix build error for musl -| /usr/src/debug/iproute2/5.19.0-r0/iproute2-5.19.0/ip/ipstats.c:231: undefined reference to `MIN' - -Signed-off-by: Changhyeok Bae -[ upstream status: cf6b60c504d4be5e1df2b2745e55d677967831d0 ] ---- - ip/ipstats.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 5cdd15ae..1ac275bd 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0+ - #include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0002-ipstats-add-missing-headers.patch b/package/iproute2/0002-ipstats-add-missing-headers.patch deleted file mode 100644 index d4b9a5d10d..0000000000 --- a/package/iproute2/0002-ipstats-add-missing-headers.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 28c740473510cd911b97cc5d7d23bd809a0f200b Mon Sep 17 00:00:00 2001 -From: Stephen Hemminger -Date: Tue, 9 Aug 2022 13:27:33 -0700 -Subject: [PATCH] ipstats: add missing headers - -IWYU reports several headers are not explicitly -included by ipstats. - -Signed-off-by: Stephen Hemminger -[ upstream status: 28c740473510cd911b97cc5d7d23bd809a0f200b] ---- - ip/ipstats.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 1ac275bd..dadded14 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,7 +1,11 @@ - // SPDX-License-Identifier: GPL-2.0+ -+#include - #include - #include -+#include -+#include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch b/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch deleted file mode 100644 index a5076d7711..0000000000 --- a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch +++ /dev/null @@ -1,29 +0,0 @@ -From d5fe96ab70928508f072a47449e9b641e46de323 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Wed, 10 Aug 2022 22:34:40 -0700 -Subject: [PATCH] configure: Define _GNU_SOURCE when checking for setns - -glibc defines this function only as gnu extention - -Signed-off-by: Khem Raj -Signed-off-by: Stephen Hemminger -[ upstream status: d5fe96ab70928508f072a47449e9b641e46de323 ] ---- - configure | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/configure b/configure -index 440facb7..c02753bb 100755 ---- a/configure -+++ b/configure -@@ -191,6 +191,7 @@ check_ipt_lib_dir() - check_setns() - { - cat >$TMPDIR/setnstest.c < - int main(int argc, char **argv) - { --- -2.37.2 - diff --git a/package/iproute2/iproute2.hash b/package/iproute2/iproute2.hash index a4b0e62c02..45af05a200 100644 --- a/package/iproute2/iproute2.hash +++ b/package/iproute2/iproute2.hash @@ -1,3 +1,3 @@ # From https://kernel.org/pub/linux/utils/net/iproute2/sha256sums.asc -sha256 26b7a34d6a7fd2f7a42e2b39c5a90cb61bac522d1096067ffeb195e5693d7791 iproute2-5.19.0.tar.xz +sha256 523139e9e72aec996374fa2de74be4c53d2dd05589488934d21ff97bae19580a iproute2-6.0.0.tar.xz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/iproute2/iproute2.mk b/package/iproute2/iproute2.mk index 5c3595d5f4..287c6b14e2 100644 --- a/package/iproute2/iproute2.mk +++ b/package/iproute2/iproute2.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPROUTE2_VERSION = 5.19.0 +IPROUTE2_VERSION = 6.0.0 IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_DEPENDENCIES = host-bison host-flex host-pkgconf \ -- 2.35.1 From thomas.petazzoni at bootlin.com Wed Oct 26 22:19:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 00:19:11 +0200 Subject: [Buildroot] [PATCH 3/4] package/libbpf: extract dependencies to separate kconfig symbol In-Reply-To: <875yg69tjz.fsf@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-4-tobias@waldekranz.com> <20221026221528.393a1d39@windsurf> <875yg69tjz.fsf@waldekranz.com> Message-ID: <20221027001911.30ad7215@windsurf> Hello Tobias, On Wed, 26 Oct 2022 23:14:08 +0200 Tobias Waldekranz wrote: > Fair enough, I will drop this change in v2 and copy the information to > kmemd.mk instead. Is there a convention for how to comment dependencies > that stem from grandparent packages? E.g. v2, kmemd.mk will declare: No need to send a v2, I already applied the patches locally, did the few fixes, I will push them soon. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 05:37:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 05:37:14 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-26 Message-ID: <20221027053721.34599408F7@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-26 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 1 | 0 | 0 | 1 | 2022.08.x | 11 | 11 | 0 | 22 | master | 130 | 253 | 11 | 394 | Classification of failures by reason for master ----------------------------------------------- brltty | 11 glibc-2.36-44-g2628500f5dff... | 11 host-f2fs-tools-1.15.0 | 11 host-sentry-cli-1.59.0 | 11 xz-5.2.7 | 10 crun-1.5 | 9 file-5.43 | 8 btrfs-progs-5.16.2 | 7 igd2-for-linux-2.1 | 7 imagemagick-7.1.0-51 | 7 libarchive-3.6.1 | 7 libcodec2-1.0.5 | 7 libglib2-2.72.3 | 7 systemd-250.4 | 7 dash-0.5.11.5 | 6 host-go-1.19.1 | 6 linux-6.0.1 | 6 host-binutils-2.38 | 5 sysvinit-2.99 | 5 efivar-38 | 4 gobject-introspection-1.72.0 | 4 libnss-3.84 | 4 libshout-2.4.6 | 4 autofs-5.1.8 | 3 elfutils-0.186 | 3 fftw-quad-3.3.8 | 3 host-pahole-73383b3a39afe86... | 3 assimp-5.2.5 | 2 batman-adv-2021.4 | 2 gensio-2.5.5 | 2 glibc-2.36-66-ga1dc0be03c9d... | 2 host-binutils-2.37 | 2 host-gcc-final-11.3.0 | 2 host-gcc-final-12.2.0 | 2 host-rust-1.64.0 | 2 libdill-32d0e8b733416208e04... | 2 libgcrypt-1.10.1 | 2 lxc-4.0.12 | 2 perl-5.34.1 | 2 traceroute-2.1.0 | 2 unknown | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 avro-c-1.11.0 | 1 berkeleydb-5.3.28 | 1 bluez5_utils-5.65 | 1 brotli-1.0.9 | 1 coreutils-9.1 | 1 crucible-2022.05.25 | 1 fontconfig-2.13.1 | 1 freeradius-client-1.1.7 | 1 freeradius-server-3.2.0 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/cpio/cpio.mk:117: /tmp/i... | 1 fs/cramfs/cramfs.mk:46: /ho... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fwts-22.09.00 | 1 gerbera-1.10.0 | 1 gsl-2.6 | 1 gummiboot-2bcd919c681c952eb... | 1 hawktracer-2ec19d7192334414... | 1 host-gcc-final-10.4.0 | 1 host-gcc-initial-10.4.0 | 1 host-gcc-initial-12.2.0 | 1 host-gdb-arc-2020.09-releas... | 1 host-go-1.19.2 | 1 iperf-2.1.8 | 1 lcms2-2.13.1 | 1 libglvnd-1.4.0 | 1 liblog4c-localtime-1.0 | 1 libpciaccess-0.17 | 1 libsigsegv-2.14 | 1 libusb-1.0.26 | 1 linux-5.10.145-cip17 | 1 linux-pam-1.5.2 | 1 linuxptp-3.1.1 | 1 lirc-tools-0.10.2 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mender-3.4.0 | 1 micropython-1.19.1 | 1 musl-1.2.3 | 1 netsurf-3.10 | 1 open62541-v1.3.3 | 1 openssh-9.1p1 | 1 procps-ng-3.3.17 | 1 rauc-1.8 | 1 sdl-1.2.15 | 1 stress-ng-0.13.05 | 1 strongswan-5.9.5 | 1 tealdeer-1.5.0 | 1 uclibc-1.0.42 | 1 usbguard-1.1.2 | 1 vlc-3.0.17.4 | 1 volk-2.5.2 | 1 wavemon-0.9.4 | 1 wolfssl-5.5.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/825c547741ac8bb54d4050f52f70aca1b9eb1172 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/ef561e91e163aafcca46e598068ba73ec14a1c71 | m68k | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e96cc7c2dbbc349338232325dd9ef585d602bb05 | xtensa | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/5b8e68a67a3c11fc896a403ccf782c4228576b9e | or1k | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/5199b99d2ff151def6695fe22b7f024519c31af5 | ORPH or1k | assimp-5.2.5 | NOK | http://autobuild.buildroot.net/results/7433b5c88b7ce58bd5dc26ef6f24dde6b0037f87 | ORPH mips64el | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/987fe55733d421daf0412492a3663edcb3963a4f | microblazeel | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/e8d7318a009da7a00bf78675c1b0342b4c1628fb | aarch64 | autofs-5.1.8 | NOK | http://autobuild.buildroot.net/results/2e64d1d67f07129840d11d3ae5b020d2c3489233 | mips64el | avro-c-1.11.0 | NOK | http://autobuild.buildroot.net/results/93f0c3d7beb049ffa57bc19489469b03c69af7ab | microblazeel | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/00783b96a0c4ae5a96c304f4c9e14d362ad1d29f | riscv64 | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/2403eb08e8c4ca099b201f7fe64af886dea89a34 | sh4 | berkeleydb-5.3.28 | NOK | http://autobuild.buildroot.net/results/f887d5479d57aa99ffa9314743fea5c378e32146 | ORPH sh4eb | bluez5_utils-5.65 | NOK | http://autobuild.buildroot.net/results/c45f392bcea5aabb2b19ffc57235857a9c25376d | mips64el | brltty | TIM | http://autobuild.buildroot.net/results/d2be0e0f9d31278182a3eddbb7f08c42c1528f43 | armeb | brltty | TIM | http://autobuild.buildroot.net/results/a7f2ef340835c126629edc3c95c49c5f2c462e94 | mips | brltty | TIM | http://autobuild.buildroot.net/results/fe254dc18b681ff3d348158ba9e39e43fe1b593f | arm | brltty | TIM | http://autobuild.buildroot.net/results/bcaea35beffcf7ee75da36d82cecb4cc9904917a | arc | brltty | TIM | http://autobuild.buildroot.net/results/f82026541aa4b4a243b75a7a1334ef46ac478adc | arm | brltty | TIM | http://autobuild.buildroot.net/results/2834aa9cb9392e0d99cc42b57cbb783649aa09be | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/83268db829ae5bcecf0f6ad4e0a860a9cb214ee6 | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/4a8f43b4ea210e4c4a10b340495bd379f9ab8d96 | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/a63028e2703a888e9e5520f0fbc846a882f5ea6b | mips | brltty | TIM | http://autobuild.buildroot.net/results/cb57d0f022621f8ec5163b0afe8fc89a3ed63493 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/d5b60f3048b83c62ac16e51393c91a04e90c8a23 | arceb | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/167847c34dbb3be7143509edd727c6e74e87fd93 | microblazeel | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/e5de3908ea666d639f7e3f6a1e302d6c3c4fbee5 | ORPH mips | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/d021c95e83e9339eea7ad3641fef1f9c69de1f1c | ORPH aarch64_be | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/84faa2608966784bda26e8b4faa7880205d0caa7 | ORPH sparc64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/8becde0ffb273aae34b0ff4091548b5971738b38 | ORPH riscv64 | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/5ba5a780c19a0ecefee493ecaa8584e8b6093801 | ORPH sh4a | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/0ca8b0c2aaa8606508a2504da8b36c69d2632c52 | ORPH arm | btrfs-progs-5.16.2 | NOK | http://autobuild.buildroot.net/results/89111720553eff90ca19262b8b5bade81f09a139 | ORPH sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/8a159c5e6d5ce01acbff97db68f98d66b93c0a86 | ORPH powerpc64le | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/cdc35f470b590f6effcf95834f21663f6ca867d7 | riscv32 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e844d1155ef1f2c42becc088465b309d1beaea62 | xtensa | crun-1.5 | NOK | http://autobuild.buildroot.net/results/de118307f79917b5ddf8ecb4ea2856ceb4b937b3 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/87a65e958850d23a96bf1403a122e73504f2a8fe | s390x | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c2749e0a1d56d2bd4091e4ba29da9328f4318428 | arceb | crun-1.5 | NOK | http://autobuild.buildroot.net/results/8e63cd00921275768749d4a17d2618652fc97621 | sh4a | crun-1.5 | NOK | http://autobuild.buildroot.net/results/4773770097c5ed8e5aeb43c9c1c1af0af92039b5 | aarch64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/b453f6ea565b52b7fc0598cf32e3c7ba3f85d9c9 | sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/447a2f23c6c297da63ab27dddcd5d80aebab65ac | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/42f148ca72996032a0d7bcc2f9113b967c18b3d5 | or1k | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/757c725f2f57df7992a93a9007f8457e6ac99b66 | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a23d40509ab97bcd0dfc491ef952495ab10bde40 | ORPH nios2 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/c042eec3c084f5c047b40d8dce9c74e5317ced65 | ORPH s390x | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/b6867d2a3fee88899a0aa721d058276c264b844e | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/124e0138ee45e5c8320cb1b9c036bf63384e0f19 | ORPH powerpc64le | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/c1b943bc0be9bf2192f61fec5577a2f9d1e84c9c | ORPH mips64el | efivar-38 | NOK | http://autobuild.buildroot.net/results/5daa0e4320b4fd29c9fbaa9b86dc6105f79a70d2 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/6be4051f0220114ef3254ccdd71f30506b98977c | powerpc64le | efivar-38 | NOK | http://autobuild.buildroot.net/results/e8109c396889b36b9e53400f4f27650bbd666574 | mipsel | efivar-38 | NOK | http://autobuild.buildroot.net/results/702e1aeed6a14b10977a77bb37e056bb7c6dc4df | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5efb55de0148ad15458fba3524c5e02df6abb8f2 | ORPH arceb | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/7c7a1687ebd6b5d5ee93328b94d0562be2ba68eb | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/905415ceec0c92ba86d375c24aa8daa335fdd7dd | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/b173cbab10dd2309290d1744786755d8e4ce3e1d | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/89b4903b0adfbc4f7b1126922a5bb94ec2efd026 | ORPH powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/7f75f73a57160adff80e6fe225812286846fe915 | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/7ff1dd9f79408d2e6286c005302b6f3c505ab259 | ORPH mipsel | file-5.43 | NOK | http://autobuild.buildroot.net/results/5215df9d5c615e00cd029314435e33d382f7b7d1 | ORPH or1k | file-5.43 | NOK | http://autobuild.buildroot.net/results/1681451934639a6910ae3c2cfd2448fea53ccaa0 | ORPH armeb | file-5.43 | NOK | http://autobuild.buildroot.net/results/2f53b16c249614fbe462e06c5b5e60f6019d7092 | ORPH xtensa | file-5.43 | NOK | http://autobuild.buildroot.net/results/d7f8260b0633351698e473ec7a86f12f02b912db | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/b177da01d237226290d4f670fd98f7da5070f19d | ORPH sparc | file-5.43 | NOK | http://autobuild.buildroot.net/results/6b292574fcf0d4aeee953dd42c6428bd7e26b34e | ORPH arc | file-5.43 | NOK | http://autobuild.buildroot.net/results/e6b30c1b564852894e5082c50b646ca60dc0b769 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/6d0d1c9c8af16ec2c56e8b243465b5162aa1cec1 | ORPH riscv64 | freeradius-client-1.1.7 | NOK | http://autobuild.buildroot.net/results/989b14ac7de43179706cd39a5a986bec2a04d46a | microblazeel | freeradius-server-3.2.0 | NOK | http://autobuild.buildroot.net/results/c04fc4df8d4972f1427bea845c76231b352a3768 | microblazeel | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/4a282bb2e313da4078e596647e2ad3c4aad8cc25 | arceb | fs/cpio/cpio.mk:117: /tmp/i... | NOK | http://autobuild.buildroot.net/results/2ec6cf38146f3ba3e50a9a5599cf38644eff3405 | arceb | fs/cramfs/cramfs.mk:46: /ho... | NOK | http://autobuild.buildroot.net/results/e7977b52277e0ae3837b12f98e1a2b009faff876 | arceb | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/3d7c9847bfe9465e4184bcb6d2c8c08868a4bf5f | m68k | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/137762e70ecb0e9f2a12f84436100141057ccc69 | aarch64 | fwts-22.09.00 | NOK | http://autobuild.buildroot.net/results/ac450a22ab1bd3ca1b5110fdf2001c9d5aaceeb2 | x86_64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/9b683099479d5db6bcaa746451f646bf2b78f59c | mips64el | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/15b2bf08e5e852f46795bf2980654c3adb2577be | riscv64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/88acea6b33673c255cddc99555bfd6de32f6fc43 | sh4 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8e1ae0385bb9664b11f1ccee3fc1472daccb4dab | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/02a18813eed8185d749e85465d9286bc03e3db0c | microblazeel | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/8ba8882a861cf7df359c23969c09b2be0725b2e5 | powerpc64 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/845c24be5e718d0d5c208a77412c89337fa58521 | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/42e40ce687e54f7f9274a6bbc7bb0116f64a648f | microblaze | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/f1023e8c72d1a1d472a48283deb9225bf8a68bdf | nios2 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/44cf9a7d530aab7d0d6003e6bd1ac7bc7848af52 | mips | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/edd204835afb9a5ad5e9789b57295e0447ba33cf | powerpc | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/b797170affea0fce17f4c4dd6e18a6d84eee08d4 | riscv32 | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee | or1k | glibc-2.36-44-g2628500f5dff... | NOK | http://autobuild.buildroot.net/results/0e202bf53a683930f3cad6edef2a4dea629eaecb | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/5571d5913556f73c1ac8582cbdf4a7e4fba3f356 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/a0392b6b521cb3e98c70b5797895e6e0ee197aa4 | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/8e8307246afcb2e4c0fd4512474287de9dffc4cc | ORPH mips | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/1c020ef273ec848d808437b66ac9416dc7acd92c | ORPH i686 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/dc002b2efc755559d5963d50666e9d8a87d9f09d | ORPH powerpc | gsl-2.6 | NOK | http://autobuild.buildroot.net/results/0f9365a7fea101b70bd2d27b4c5ed1e3255844c9 | ORPH x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/6880ab57859a1bead9e5c027620625b509b2dffb | nios2 | hawktracer-2ec19d7192334414... | NOK | http://autobuild.buildroot.net/results/7f130ab90602374e152efd1bae7fd55099a25ff9 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/e550010fc8e2cf4b720b42ef1774b6729d618635 | arceb | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/236ef5fda773993ed0b39ba2eb766bf055b87b94 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/0b5ac87f1d2c94e02c7af8b5ea04b7eca1155b1f | powerpc64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8f2b2e56dd5b8a6f9faa895f1ef144877e51e2c5 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/f2529c844fb6bb5ea1198477ff6f79d1dcf6bc64 | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/12cc7ecba650c7b08ca56c4894d6a277078fb25a | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/b7e5ee38b1046b913498c2e1080dfdecbb84eca3 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3198e2bc086c97662919b36916d61a5898ba794 | riscv32 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b64a2932149376b879459301e9a9a4a0f6436f0f | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/dd08bdb6675361e5280751638b4a3ee313d2e877 | sparc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5b8f6ee2748b45e3db3e5c1d605f48e8b6b15408 | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d6c00ebdf079eed07e6a1d977f40373ef367f064 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/48de79ac3a582fa9e82e42fd93f4ab98c04a5e0c | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4b92bddf8ff2ee5d792b1ad1e8d27662986fb213 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/395b1618aac1f2c62f45690504609b9af60515e7 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9a334a27512948851446432c95df31177e8d3e76 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b1ad86b2d214d9625bfe7e43e9a88fda07cf7e31 | aarch64_be | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/05de5fcd72fa687126dd1ab0698bc56463121aa0 | arm | host-gcc-final-10.4.0 | NOK | http://autobuild.buildroot.net/results/02696dc36166c44bfb836bfaf2a976c9f931b714 | microblaze | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/2b1dc5cad41cbb078c64f4fb708c5e77e73a34b7 | s390x | host-gcc-final-11.3.0 | NOK | http://autobuild.buildroot.net/results/66e8191f4fc6af356d3fecb2b5c84ce42ac0f948 | microblaze | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/baca56c99acf72c32019320453b8126a8b802354 | arm | host-gcc-final-12.2.0 | NOK | http://autobuild.buildroot.net/results/ccc2699fa00ac4006b619b36f56d13fab6c551f7 | aarch64 | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/67e37d9d00b65330ce265b6fb51711e1ff1be01e | arm | host-gcc-initial-12.2.0 | NOK | http://autobuild.buildroot.net/results/6554b3503b4b6a192d748888dfc11056accfc4a0 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/872e8a2dd9b96d66dfe51bd7287ef14aa03a5b45 | ORPH mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/8f96fec32590df27fc918f94be377e4cd78b0e37 | mips64el | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d69c6e35038c8d0b958b2025cc7dd25541030540 | aarch64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/06f6ada2421bc595108a801aa9da039982663eb0 | i686 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/d6c4d1cdebc4d3a04fceefbce059bd464df6e6c2 | riscv64 | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/12071f61176f90565f2b29b70dd538ec713e0e22 | powerpc64le | host-go-1.19.1 | NOK | http://autobuild.buildroot.net/results/fc645d0e89ed2a1be67eb7a46da9f21bd05afc33 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/42e68753b9adb23c5ee4cdb9621548b4fd9fdd6c | or1k | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/8070446ce7f6a7766eee08c997b66b8902d7435f | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/68907e07ddbce85d8676d8092bffbb91f98b6c43 | armeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/60aaaf8a932101c305875ffef58705219f0c2a5d | i686 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/219616d859c1cdda892d239fd70d8026189126ef | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/7f28c9091db5f48a4afc084e2929a8d9dc0ecd29 | riscv64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/08b6d9be1408dd54bcd7ac9eb69e1c0f02cc39b1 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f33d70f53ae5394425d2839464771aa7fae1569a | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a65de0a7d9dedf9e6e2e71f1ffe21baa830c3c0c | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f06f289eba8c1435dc37ab2918c59f5115ab337b | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/fd3532c5e4bac4013e0f630f9773c8185f1c1d8a | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a0a352ccd2f0b7f0abff9418a510003fadc677f5 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/c69d92f9ad33eccf482226c31fa5fff76f3cbf73 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/219059be99929512c7bac93e242af9b0e55b32a5 | sparc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/801ffd4967bed251fa96c5a9b530171440584066 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4 | aarch64_be | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/0c7bed50b1dab4dd18a7dfd7f7a8daab85805ebc | nios2 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/6ba1729880afc537221290868c20facaa5e4767b | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/4e76beae0d3a6883740dfaadd0ffcda9c7ffc6e2 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/defc5e84150d68b664380355a563b8c721411a96 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/f0bb1cbb7349028db3ec37ec1ae371d9d5d3ad34 | microblaze | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fc2c1a1113d9214813e9ff0baaf837f94df08a54 | mips64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/a8169be4ccc3c8ddee13688448ae7dc147500c56 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40aaae4125c17b3abbbc152acbacdafe0cbd6f16 | microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/cede597258cff8c15a42a39f8479d6cb12914ea8 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/dba3622da8b71e2b1eea3132870374359c10217e | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/d5869fbff77f2972bb63f3adfe380ecc318377c9 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/30f2138ec7bd86a4e024aa46325ba960b16b3ead | ORPH microblazeel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/3d177d1ce753146693c944ce3b11ab42614d3b03 | ORPH mips64el | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/433f3a49deb5bccba9655a1fb8dd299d814fdb9a | ORPH arceb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/29f18d711034ebd085fa2141b9d7f77489479eef | ORPH arm | iperf-2.1.8 | NOK | http://autobuild.buildroot.net/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 | xtensa | lcms2-2.13.1 | NOK | http://autobuild.buildroot.net/results/5c42bb1a2bf3f81285ccae400c8b351fa46f97af | i586 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/5492ae83a448cf4752ec95c21fc9050bf9aabea8 | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bedac2c10e317ddacdbfd147ca89cb1f6c657a5e | nios2 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/287dc8e515d48db988c37f03c001b093177038c9 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/dbe26e2860ce312d1909e2fa538e50062b464e31 | sparc64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/c646f70adf71e367ecdcfe8122782a2d9b74c43e | or1k | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/bccbb83cbbeb6f54a6c8165467151b47d3b4ca48 | aarch64 | libarchive-3.6.1 | NOK | http://autobuild.buildroot.net/results/84adc94a8bdaebb60cd8087dc41652795e58dde4 | powerpc64le | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/a52df649dadcdd804d8a668a497cf5535f005074 | mips64el | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/70f18513d975160c868d51d1b42a59dbb21cfb1a | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/76b60772f81c2e3b6e1150024376954c14f2bd8e | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/6e34f3c1d1180c3aabf4288db559632c0eb29d1c | arm | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/f38ba949ffa02d415545caa8a8024ed2181a5a8f | powerpc64le | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/8b53e57858583d127b94c7280816c3967dff5d35 | s390x | libcodec2-1.0.5 | NOK | http://autobuild.buildroot.net/results/3f95f832aacebc81e0323005c01040529c8a7462 | or1k | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/035e8aa6c34c1fce0f7f7d83fe1387b2ccc362e2 | riscv32 | libdill-32d0e8b733416208e04... | NOK | http://autobuild.buildroot.net/results/fcf188d660f0eb3a7f3205dfcb9683d39a950797 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/45f2f4b93b173517a70cf9bbbeadaaf493a34a8f | ORPH i586 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/78027f2bc0180d83c9b9d0739a4cf7e28908e19d | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/344834c476ae73ace0f2ecd2b05fb0089c7a330f | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/296d469b8515f0f1ed3c096317f285bde8ed24c2 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1c6805ed0aaaeac78074ac9874be30560a2f854e | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/1c8c24083dcd452b141fe7123ff2ece440ae2af1 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/ac961c4ea63926a9abee99a06a60042f0bc94e46 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/194ce2000c8f725f4d576295ee8705187c384edb | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/236b25dfc5be57e58e858f2c11bdf4383e715557 | microblazeel | libglvnd-1.4.0 | NOK | http://autobuild.buildroot.net/results/27bc946f6fc701b7482208e68d637a63b3217dfb | ORPH riscv64 | liblog4c-localtime-1.0 | NOK | http://autobuild.buildroot.net/results/ebb1e11f0f60748401717644a8bd939e39fa0203 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/5a2e998567349f339cc02001df0f9264e02aedf5 | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ddc116f787af0d1c34ee6ddd8ad5b92e902f0fb9 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/13e409670cd9bb7b2b0cea4df0ae941329df41ff | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e9c41823dbc651222679771bd16b9aba786ad98b | sh4eb | libpciaccess-0.17 | NOK | http://autobuild.buildroot.net/results/08d57b8d147ac0021e6a848d800a5b85e8bbc65f | nios2 | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/7e798ab35898a2601876c53e72c52b907794b2cf | ORPH microblazeel | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/3a85cbc64fc13fa6e335ca8dcf64f8a5e77c71f0 | ORPH sparc | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/ac39928f1734ad9d6e490b66aec302190855637c | ORPH sh4aeb | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/4b0a8ca3d82d0a14a6b45c450be6dbf5388ca425 | ORPH powerpc | libsigsegv-2.14 | NOK | http://autobuild.buildroot.net/results/bb07cebebe8a26836cec163acf2e25f4dd495051 | mips64el | libusb-1.0.26 | NOK | http://autobuild.buildroot.net/results/165d4caf6e1e1d40ba81e901fe38a84ed3db6dfe | armeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/fd269255cd6af30dcc00fbae71e951137569b08d | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/dc4789182ed5f77084341dffb97b25f72419d04b | ORPH m68k | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/9095d1e400932f3f2504da091bf9c60835cafbee | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/8cb2e6090dd858e3ced68d7ac104786e1f8ccdaf | ORPH mips64el | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1e9cdc5885ec8a858634470dbb90ff68c12ab13b | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ad79543d1af444d09db3d37a7cde65ae8925d8d9 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1cf4537a16834b990b5ad28d4f4bd6dbdbd68ea4 | ORPH armeb | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/91700c3956df581e5bab3877ea32fde0d50f9d50 | ORPH aarch64 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/97293b9304ed760828743148001d475cb4252f81 | microblazeel | lirc-tools-0.10.2 | NOK | http://autobuild.buildroot.net/results/5ffa71de0b7d9e18fa13b76cf6e4df5b7daeb9d7 | ORPH powerpc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/770609d58eab18743dfa43098fa466a37541ba4a | sparc64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/b0fed736ac62a522c57c639aed7e873cadb70a62 | sparc | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/44b7a26ff8196b39edf972771187b7af2898bdb7 | nios2 | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/e650ad609a205f458d736e8bac695e946e99bdc3 | ORPH powerpc64le | mender-3.4.0 | NOK | http://autobuild.buildroot.net/results/ca4c2ad381fcb3f13428f367bb0480f5f63f71cd | aarch64 | micropython-1.19.1 | NOK | http://autobuild.buildroot.net/results/32adc06d047e3ecb0f1b7b773cdc66c39a7f67ee | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/63d623aa6bffade2bb602592a3cce3d830c20ab3 | sh4aeb | netsurf-3.10 | NOK | http://autobuild.buildroot.net/results/5c9e0a3478ce39d154328a84ebea98e1f56cde63 | powerpc64le | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/af3f2408e3ea7e880fb2f3fc0f01351a04e98645 | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/dca1b0e9f323131babc327cc32a9d15ef7683ef1 | ORPH sparc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3ced42bff937848382c71d5a110adf70c94cb290 | arc | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/1c288e5bf53df44835ea01eaf190c9af4aebd6a8 | x86_64 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/9be42feb1d4e8d2cee8cda708665e96afd3d02e3 | ORPH riscv64 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/3f3a50acf5de4c17aa3d0e8d27f803e33c479f2b | sh4eb | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/60fe56597202b32691ef588d33a2bc2fddaeea53 | ORPH sh4a | stress-ng-0.13.05 | NOK | http://autobuild.buildroot.net/results/556593987e972d04efd7baabfa72a6a702aca2c6 | arceb | strongswan-5.9.5 | NOK | http://autobuild.buildroot.net/results/5cf6aa18fd9928581314b2970a8090481f015c8b | s390x | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/055faf9bc247880690d112ff8a013742b29c09f0 | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c49e7520f6d2c865a320ab03b7986c88fa10a790 | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/c34e462796163247bc753c039935162b1b44669e | sparc64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/39b991d6faf98252004280a37bb12009b2cc38ad | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/1dc46ac8c9a8bc80df8b9b06caf3b1cb6de2aa74 | x86_64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/ca4e9c0697cc7a650f747d69f43872a47ed2bf2a | mips64 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/f8906f87caa72ed561b8980b5f9e039b57ad8345 | x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/856f41485a0f3650fc7ec6c2f2af9bbcfa8fca00 | ORPH sparc64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/ef6bcf6e56a88d9cb6b42388dff07a24e5518e44 | ORPH x86_64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/d3d840dbf1532ec527db0edd46e27962cf2b4fc5 | ORPH mips64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/f9fde8c126538523309e53a340124046919474db | ORPH aarch64 | sysvinit-2.99 | NOK | http://autobuild.buildroot.net/results/c2b54068cfc0ef80fd4ea67a77341c3d36c18eac | ORPH mipsel | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/95fa846021d82a2043f24575e34a0e7548e75d16 | mips64el | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/66b9c45fecbbdf8dfa8219e67bbdc1813f0be4db | armeb | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/d1331ffbbabd6e690841df1f3fac34ac1f389aa1 | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/650de76a851707aa3b0a096e3d36c4a0447f4720 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/fad421293cf6cfebec15e39791b229fc69baa68f | mips | unknown | NOK | http://autobuild.buildroot.net/results/88225e33da151865aecae34ce0ec897758148c4e | powerpc64le | usbguard-1.1.2 | NOK | http://autobuild.buildroot.net/results/b70dcf8628d9522579e4678e4d8873d7e52ddd95 | sh4aeb | vlc-3.0.17.4 | NOK | http://autobuild.buildroot.net/results/86a0c3dde276fb606bf61184a796f3670339b767 | powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/c55e21ac3c27ac5ab9ae44b4a75b1318e37b08c4 | powerpc64 | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/e3b8f3e407e44cf340ef6e8612374d9e223ef02f | ORPH mips | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/9551cca51591005e2600ab6a83edf8c811d4ad30 | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9a02909ad44c4d79b2507d056ae42bada790565f | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/a6fd3541e585a65e4adf990a6dabdce846953df2 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/1f6b567a95d38036ad4ae2507be3207701b75602 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/28b9c395d0d37370b236da7f738f31aa3f0d88ba | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/7a4de28a9a1d97ef8aa3a33f5f6f200d009dda37 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/0fdc122cbe145bd78070e79854a0bd0c523e29dd | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/520a0c262d3555722cc25437f1917fca448ad1ae | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f8d5259288d5002086d21efa5cb61c3841ef705c | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/e5ac80ce873cfcfe4f5a4098fa0edd59739a0eb2 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/9e34d27b55bdad4adf70e7deed078b797fc3923d | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/bf634446a668a3a680c1a1eb1ce4604e0e963c68 | ORPH Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 3 crucible-2022.05.25 | 1 gerbera-1.10.0 | 1 host-rust-1.62.0 | 1 host-spirv-llvm-translator-... | 1 igd2-for-linux-2.1 | 1 ipmiutil-3.1.8 | 1 libdeflate-1.12 | 1 perl-5.34.1 | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/8ba2977bd712fc965c5375cff30b34b67fcc534e | sparc64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ff276691c492cfb3b6abcf34d5e3a0926c40f22c | mipsel | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/4167e14851112a8f1699611b62c08e5b75632ad0 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/74d5dbb5bdf81b32c317dca4fc7212b16ced156f | ORPH mips | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/537bdc9b1c06c90a5150f72cdbcb3c7c8439638f | x86_64 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/c3a0d5952cc9c82f7b1f9c21c116d6a8b4a65e57 | armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/576796e44afccc51916a7d42d2f99e39bf4011ee | arceb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/fee72dff0db81510d62e883c8d0c5cc25a47c591 | ORPH aarch64 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/1f8b1e7227a8799aa19994a2c7c26d88ed705bc1 | ORPH microblaze | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/4372b32333d37bd08b8a9385e92af9911f374c0b | ORPH arm | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/040d870c3584235c64af33fc602a149a872af782 | Gitlab CI results for 2022-10-26 ================================ -- http://autobuild.buildroot.net From yann.morin at orange.com Thu Oct 27 05:50:35 2022 From: yann.morin at orange.com (yann.morin at orange.com) Date: Thu, 27 Oct 2022 07:50:35 +0200 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026205312.3f729eb8@windsurf> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> <7333_1666791084_635936AC_7333_90_1_20221026133122.GF1657509@tl-lnx-nyma7486> <20221026205312.3f729eb8@windsurf> Message-ID: <6313_1666849837_635A1C2D_6313_23_1_20221027055035.GG1657509@tl-lnx-nyma7486> Thomas, All, On 2022-10-26 20:53 +0200, Thomas Petazzoni spake thusly: > On Wed, 26 Oct 2022 15:31:22 +0200 > wrote: > > What about external toolchains? > External toolchains are not affected because when we copy the sysroot > from the toolchain into STAGING_DIR, we do this: [--SNIP--] > (from toolchain/helpers.mk:copy_toolchain_sysroot) Ah, so this is already handled explicitly as a generic fixup.? > Does that this seem like a good enough answer for the external > toolchain case? If so, I can submit a v2 with an amended commit log. Yes, this is perfect, thanks! Regards, Yann E. MORIN. -- ____________ .-----------------.--------------------: _ :------------------. | Yann E. MORIN | Real-Time Embedded | __/ ) | /"\ ASCII RIBBON | | | Software Designer | _/ - /' | \ / CAMPAIGN | | +33 638.411.245 '--------------------: (_ `--, | X AGAINST | | yann.morin (at) orange.com |_=" ,--' | / \ HTML MAIL | '--------------------------------------:______/_____:------------------' _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. From thomas.petazzoni at bootlin.com Wed Oct 26 20:35:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 22:35:14 +0200 Subject: [Buildroot] [git commit] package/libbpf: install in the correct lib directory Message-ID: <20221027064525.E3CC587279@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c86b69a16dee0281d75890118110be934367430e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The libbpf build system currently uses the output of "uname -m" to determine if the library should be installed in "lib" or "lib64". However, uname -m returns the architecture of the build machine, which often has nothing to do with the target CPU architecture. A patch has been submitted and accepted upstream to address this issue, by using the $(CC) -dumpmachine output instead. This ensures libbpf is installed in either "lib" or "lib64" depending on the bitness of the target CPU architecture. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- ...-Fix-cross-compilation-for-32-bit-targets.patch | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch b/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch new file mode 100644 index 0000000000..12c22f3147 --- /dev/null +++ b/package/libbpf/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch @@ -0,0 +1,38 @@ +From 68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Fri, 14 Oct 2022 21:14:14 +0200 +Subject: [PATCH] Makefile: Fix cross-compilation for 32-bit targets + +Determining the correct library installation path (lib vs. lib64) +using uname(1) breaks in cross compilation scenarios where word widths +differ between the host and target system. + +Instead, source the information from the compilers '-dumpmachine' +option (supported by both GCC and Clang). + +We call this the "host" architecture, using the same nomenclature as +Autotools (--host configure option). + +Upstream: https://github.com/libbpf/libbpf/commit/68e6f83f223ebf3fbf0d94c0f4592e5e6773f0c1 +Signed-off-by: Tobias Waldekranz +--- + src/Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/src/Makefile b/src/Makefile +index 3cd0854..d535f81 100644 +--- a/src/Makefile ++++ b/src/Makefile +@@ -77,7 +77,8 @@ INSTALL = install + + DESTDIR ?= + +-ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(shell uname -m)),) ++HOSTARCH = $(firstword $(subst -, ,$(shell $(CC) -dumpmachine))) ++ifeq ($(filter-out %64 %64be %64eb %64le %64el s390x, $(HOSTARCH)),) + LIBSUBDIR := lib64 + else + LIBSUBDIR := lib +-- +2.34.1 + From thomas.petazzoni at bootlin.com Wed Oct 26 21:30:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Wed, 26 Oct 2022 23:30:13 +0200 Subject: [Buildroot] [git commit] package/kmemd: new package Message-ID: <20221027064525.F3B3E872B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b3f915c6561bcb2f7952faca3bedf1766f299538 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master kmemd let's you inspect a live Linux kernel's memory using GDB. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/kmemd/Config.in | 20 ++++++++++++++++++++ package/kmemd/kmemd.hash | 3 +++ package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ 5 files changed, 47 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..bc4640685a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2936,6 +2936,9 @@ F: package/waf/ F: support/testing/tests/package/test_crudini.py F: support/testing/tests/package/test_redis.py +N: Tobias Waldekranz +F: package/kmemd/ + N: Tudor Holton F: package/openjdk/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ebafe11dea 100644 --- a/package/Config.in +++ b/package/Config.in @@ -111,6 +111,7 @@ menu "Debugging, profiling and benchmark" source "package/iozone/Config.in" source "package/kexec/Config.in" source "package/kexec-lite/Config.in" + source "package/kmemd/Config.in" source "package/kvm-unit-tests/Config.in" source "package/kyua/Config.in" source "package/latencytop/Config.in" diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in new file mode 100644 index 0000000000..902e636947 --- /dev/null +++ b/package/kmemd/Config.in @@ -0,0 +1,20 @@ +config BR2_PACKAGE_KMEMD + bool "kmemd" + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libbpf + depends on BR2_USE_WCHAR # libbpf + depends on !BR2_STATIC_LIBS # libbpf + depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf + select BR2_PACKAGE_LIBBPF + help + Explore a live Linux kernel's memory using GDB + + https://github.com/wkz/kmemd + +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ + || !BR2_TOOLCHAIN_HAS_THREADS \ + || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 \ + || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC) diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash new file mode 100644 index 0000000000..aecfea57f8 --- /dev/null +++ b/package/kmemd/kmemd.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/kmemd/kmemd.mk b/package/kmemd/kmemd.mk new file mode 100644 index 0000000000..902941b981 --- /dev/null +++ b/package/kmemd/kmemd.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# kmemd +# +################################################################################ + +KMEMD_VERSION = 1.0.0 +KMEMD_SITE = https://github.com/wkz/kmemd/releases/download/$(KMEMD_VERSION) +KMEMD_LICENSE = GPL-2.0 +KMEMD_LICENSE_FILES = COPYING +KMEMD_DEPENDENCIES = libbpf + +define KMEMD_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_BPF_SYSCALL) + $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) + $(call KCONFIG_ENABLE_OPT,CONFIG_KPROBES) + $(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS) +endef + +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:46:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:46:19 +0200 Subject: [Buildroot] [PATCH 1/4] package/libbpf: fix cross compilation for 32-bit targets In-Reply-To: <20221020141412.346992-2-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-2-tobias@waldekranz.com> Message-ID: <20221027084619.67b393b2@windsurf> On Thu, 20 Oct 2022 16:14:09 +0200 Tobias Waldekranz wrote: > Add upstream patch that sources the library path (lib vs. lib64) from > the compiler rather than from uname(1). > > Signed-off-by: Tobias Waldekranz > --- > ...cross-compilation-for-32-bit-targets.patch | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 package/libbpf/1.0.1/0001-Makefile-Fix-cross-compilation-for-32-bit-targets.patch Thanks, applied with a rework commit log: package/libbpf: install in the correct lib directory The libbpf build system currently uses the output of "uname -m" to determine if the library should be installed in "lib" or "lib64". However, uname -m returns the architecture of the build machine, which often has nothing to do with the target CPU architecture. A patch has been submitted and accepted upstream to address this issue, by using the $(CC) -dumpmachine output instead. This ensures libbpf is installed in either "lib" or "lib64" depending on the bitness of the target CPU architecture. Signed-off-by: Tobias Waldekranz Signed-off-by: Thomas Petazzoni The patch was also moved away from the version-specific directory, and the upstream status of the patch was added in the patch itself. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:00 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221020141412.346992-5-tobias@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> Message-ID: <20221027084900.0844e13a@windsurf> On Thu, 20 Oct 2022 16:14:12 +0200 Tobias Waldekranz wrote: > kmemd let's you inspect a live Linux kernel's memory using GDB. > > Signed-off-by: Tobias Waldekranz I have applied a patch, with a few small changes. > --- > package/Config.in | 1 + > package/kmemd/Config.in | 11 +++++++++++ > package/kmemd/kmemd.hash | 5 +++++ > package/kmemd/kmemd.mk | 20 ++++++++++++++++++++ > 4 files changed, 37 insertions(+) I added an entry in the DEVELOPERS file for this package, so that we know you are the contact. You will receive e-mails if there are build failures or CVEs affecting this package, and when new releases are made upstream (even though I suppose you are the upstream maintainer, so you should already know!) > diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in > new file mode 100644 > index 0000000000..2190488b0f > --- /dev/null > +++ b/package/kmemd/Config.in > @@ -0,0 +1,11 @@ > +config BR2_PACKAGE_KMEMD > + bool "kmemd" > + depends on BR2_PACKAGE_LIBBPF_SUPPORTED Changed to repeat the dependencies of libbpf. > + select BR2_PACKAGE_LIBBPF > + help > + Explore a live Linux kernel's memory using GDB > + > + https://github.com/wkz/kmemd > + > +comment "kmemd needs libbpf" > + depends on !BR2_PACKAGE_LIBBPF_SUPPORTED This comment was not correct: you are selecting libbpf, so you don't need to say that you need it. Instead, I've added our usual comment, which corresponds to the dependencies inherited from libbpf. > diff --git a/package/kmemd/kmemd.hash b/package/kmemd/kmemd.hash > new file mode 100644 > index 0000000000..60b8589dd2 > --- /dev/null > +++ b/package/kmemd/kmemd.hash > @@ -0,0 +1,5 @@ > +# Locally calculated > +md5 9954bf82279eeb0da016654689f69ac2 kmemd-1.0.0.tar.gz > +sha1 3ae3bdceb70d674f41f56cd489c7497944b9b0f0 kmemd-1.0.0.tar.gz > +sha256 519ac3cdd367acee5090eec3b7e08400724f9b84486b191f3af534bd7cffca70 kmemd-1.0.0.tar.gz When we have a sha256, md5/sha1 hashes are not needed, so I dropped them. Applied with those changes, thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/usbguard: fix build without asciidoc In-Reply-To: <20221026201736.327835-1-fontaine.fabrice@gmail.com> References: <20221026201736.327835-1-fontaine.fabrice@gmail.com> Message-ID: <20221027084946.7ca40b33@windsurf> On Wed, 26 Oct 2022 22:17:36 +0200 Fabrice Fontaine wrote: > Set ac_cv_prog_A2X to disable build of documentation and avoid the > following build failure without a working a2x raised since at least bump > to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: > > a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) > a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) > /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') > > Fixes: > - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef > > Signed-off-by: Fabrice Fontaine > --- > package/usbguard/usbguard.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:49:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:49:32 +0200 Subject: [Buildroot] [git commit] package/usbguard: fix build without asciidoc Message-ID: <20221027065010.CBD4A872EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cff78c34fbf80880c39725049ff42c3dd632fd7a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Set ac_cv_prog_A2X to disable build of documentation and avoid the following build failure without a working a2x raised since at least bump to version 1.1.1 in commit ad21d84a589458fd4542993912891daa503d72dd: a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff) a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff) /nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc') Fixes: - http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/usbguard/usbguard.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/usbguard/usbguard.mk b/package/usbguard/usbguard.mk index e0c9b58221..60b69df3be 100644 --- a/package/usbguard/usbguard.mk +++ b/package/usbguard/usbguard.mk @@ -10,6 +10,7 @@ USBGUARD_LICENSE = GPL-2.0+ USBGUARD_LICENSE_FILES = LICENSE USBGUARD_CPE_ID_VENDOR = usbguard_project USBGUARD_SELINUX_MODULES = usbguard +USBGUARD_CONF_ENV = ac_cv_prog_A2X="" USBGUARD_CONF_OPTS = \ --with-bundled-catch \ --with-bundled-pegtl \ From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:02 +0200 Subject: [Buildroot] [git commit] package/iperf: fix build without threads Message-ID: <20221027065010.D4F13872ED@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5335c9d12ce1bc269ae06996025ae8c6f9ee694c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure without threads raised since bump to version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': Settings.cpp:1281:9: error: break statement not within loop or switch 1281 | break; | ^~~~~ Fixes: - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...0001-fix-single-threaded-compile-breakage.patch | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/package/iperf/0001-fix-single-threaded-compile-breakage.patch b/package/iperf/0001-fix-single-threaded-compile-breakage.patch new file mode 100644 index 0000000000..85baf76ea4 --- /dev/null +++ b/package/iperf/0001-fix-single-threaded-compile-breakage.patch @@ -0,0 +1,32 @@ +From 6405b7a005bb2364466b56f480d50af0be423d76 Mon Sep 17 00:00:00 2001 +From: Robert McMahon +Date: Tue, 27 Sep 2022 20:31:04 -0700 +Subject: [PATCH] fix single threaded compile breakage + +[Retrieved (and backported) from: +https://sourceforge.net/p/iperf2/code/ci/6405b7a005bb2364466b56f480d50af0be423d76] +Signed-off-by: Fabrice Fontaine +--- + include/version.h | 2 +- + src/Settings.cpp | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/Settings.cpp b/src/Settings.cpp +index aac1b5f..fc5a181 100644 +--- a/src/Settings.cpp ++++ b/src/Settings.cpp +@@ -1160,10 +1160,10 @@ void Settings_Interpret (char option, const char *optarg, struct thread_Settings + delete [] tmp; + } + } ++ } + #else + fprintf(stderr, "bounceback-congest option requires a platform that supports threads\n"); + #endif +- } + } + if (bouncebackdelaystart) { + bouncebackdelaystart = 0; +-- +2.35.1 + From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/iperf: fix build without threads In-Reply-To: <20221026203941.555393-1-fontaine.fabrice@gmail.com> References: <20221026203941.555393-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085007.1d08e379@windsurf> On Wed, 26 Oct 2022 22:39:41 +0200 Fabrice Fontaine wrote: > Fix the following build failure without threads raised since bump to > version 2.1.8 in commit ede944f53509f825aa983de19d34fc30259b812c: > > Settings.cpp: In function 'void Settings_Interpret(char, const char*, thread_Settings*)': > Settings.cpp:1281:9: error: break statement not within loop or switch > 1281 | break; > | ^~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/2bcddf8439f6913fdf19b1fc2d33999a787ab3b2 > > Signed-off-by: Fabrice Fontaine > --- > ...fix-single-threaded-compile-breakage.patch | 32 +++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 package/iperf/0001-fix-single-threaded-compile-breakage.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/shapelib: add SHAPELIB_CPE_ID_VENDOR In-Reply-To: <20221026210334.565454-1-fontaine.fabrice@gmail.com> References: <20221026210334.565454-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085054.57f7d9d4@windsurf> On Wed, 26 Oct 2022 23:03:33 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib > > Signed-off-by: Fabrice Fontaine > --- > package/shapelib/shapelib.mk | 1 + > 1 file changed, 1 insertion(+) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:26 +0200 Subject: [Buildroot] [git commit] package/shapelib: add SHAPELIB_CPE_ID_VENDOR Message-ID: <20221027065143.7D81D872F9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1545a88f9d5a694eed1a01dc0220ec1dabf5cabe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:osgeo:shapelib is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aosgeo%3Ashapelib Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/shapelib/shapelib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index bedd15dc35..52f9584e19 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -8,6 +8,7 @@ SHAPELIB_VERSION = 1.5.0 SHAPELIB_SITE = http://download.osgeo.org/shapelib SHAPELIB_LICENSE = MIT or LGPL-2.0 SHAPELIB_LICENSE_FILES = web/license.html COPYING +SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:50:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:50:42 +0200 Subject: [Buildroot] [git commit] package/shapelib: fix CVE-2022-0699 Message-ID: <20221027065143.8941A872FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=810c0eecf1fb81de43c67d602290e911d6a3a486 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0 and older releases. This issue may allow an attacker to cause a denial of service or have other unspecified impact via control over malloc. Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...0001-Remove-double-free-in-contrib-shpsrt.patch | 26 ++++++++++++++++++++++ package/shapelib/shapelib.mk | 3 +++ 2 files changed, 29 insertions(+) diff --git a/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch new file mode 100644 index 0000000000..a565874b8c --- /dev/null +++ b/package/shapelib/0001-Remove-double-free-in-contrib-shpsrt.patch @@ -0,0 +1,26 @@ +From c75b9281a5b9452d92e1682bdfe6019a13ed819f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Albin=20Eldst=C3=A5l-Ahrens?= +Date: Mon, 3 Jan 2022 12:34:41 +0100 +Subject: [PATCH] Remove double free() in contrib/shpsrt, issue #39 + +This fixes issue #39 + +[Retrieved from: +https://github.com/OSGeo/shapelib/commit/c75b9281a5b9452d92e1682bdfe6019a13ed819f] +Signed-off-by: Fabrice Fontaine +--- + contrib/shpsort.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/contrib/shpsort.c b/contrib/shpsort.c +index e21e9e0..920cd8c 100644 +--- a/contrib/shpsort.c ++++ b/contrib/shpsort.c +@@ -113,7 +113,6 @@ static char ** split(const char *arg, const char *delim) { + free(result[--i]); + } + free(result); +- free(copy); + return NULL; + } + result = tmp; diff --git a/package/shapelib/shapelib.mk b/package/shapelib/shapelib.mk index 52f9584e19..37d2d9ae64 100644 --- a/package/shapelib/shapelib.mk +++ b/package/shapelib/shapelib.mk @@ -11,4 +11,7 @@ SHAPELIB_LICENSE_FILES = web/license.html COPYING SHAPELIB_CPE_ID_VENDOR = osgeo SHAPELIB_INSTALL_STAGING = YES +# 0001-Remove-double-free-in-contrib-shpsrt.patch +SHAPELIB_IGNORE_CVES += CVE-2022-0699 + $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:02 +0200 Subject: [Buildroot] [PATCH 1/1] package/tealdeer: bump version to 1.6.1 In-Reply-To: <20221026230917.5092886c@c3po> References: <20221026230917.5092886c@c3po> Message-ID: <20221027085402.4a8142b0@windsurf> On Wed, 26 Oct 2022 23:09:17 +0200 Danilo wrote: > Signed-off-by: Danilo Bargen > --- > package/tealdeer/tealdeer.hash | 2 +- > package/tealdeer/tealdeer.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/faad2: bump to version 2.10.1 In-Reply-To: <20221026212122.592457-1-fontaine.fabrice@gmail.com> References: <20221026212122.592457-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085433.79abc469@windsurf> On Wed, 26 Oct 2022 23:21:22 +0200 Fabrice Fontaine wrote: > https://github.com/knik0/faad2/releases/tag/2.10.1 > > Signed-off-by: Fabrice Fontaine > --- > package/faad2/faad2.hash | 2 +- > package/faad2/faad2.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:38 +0200 Subject: [Buildroot] [PATCH 1/1] package/iproute2: bump to version 6.0.0 In-Reply-To: <20221026214055.625267-1-fontaine.fabrice@gmail.com> References: <20221026214055.625267-1-fontaine.fabrice@gmail.com> Message-ID: <20221027085438.1bbe98a6@windsurf> On Wed, 26 Oct 2022 23:40:55 +0200 Fabrice Fontaine wrote: > Drop patches (already in version) > > Signed-off-by: Fabrice Fontaine > --- > .../0001-ipstats-Add-param.h-for-musl.patch | 29 ---------------- > .../0002-ipstats-add-missing-headers.patch | 33 ------------------- > ...-_GNU_SOURCE-when-checking-for-setns.patch | 29 ---------------- > package/iproute2/iproute2.hash | 2 +- > package/iproute2/iproute2.mk | 2 +- > 5 files changed, 2 insertions(+), 93 deletions(-) > delete mode 100644 package/iproute2/0001-ipstats-Add-param.h-for-musl.patch > delete mode 100644 package/iproute2/0002-ipstats-add-missing-headers.patch > delete mode 100644 package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 06:51:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:51:22 +0200 Subject: [Buildroot] [git commit] package/tealdeer: bump version to 1.6.1 Message-ID: <20221027065529.6F80187312@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=777f8fbec575397e638d5775336cf645a7ad80cf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Danilo Bargen Signed-off-by: Thomas Petazzoni --- package/tealdeer/tealdeer.hash | 2 +- package/tealdeer/tealdeer.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/tealdeer/tealdeer.hash b/package/tealdeer/tealdeer.hash index 0e53174841..1d9eb7bf25 100644 --- a/package/tealdeer/tealdeer.hash +++ b/package/tealdeer/tealdeer.hash @@ -1,4 +1,4 @@ # Locally generated -sha256 42febf9ee84721b9230077d62e2fc51201fd59624d3c776ccc1a634788768a60 tealdeer-1.5.0.tar.gz +sha256 90690d3a6e2f6c7444c281865bd5b0787e0afa599f06b52b4283bea4541e1e77 tealdeer-1.6.1.tar.gz sha256 62c7a1e35f56406896d7aa7ca52d0cc0d272ac022b5d2796e7d6905db8a3636a LICENSE-APACHE sha256 a313b5e62b80a08f3aae0fa62ff3de8482ef55247299eb352ab44f87ef456b1b LICENSE-MIT diff --git a/package/tealdeer/tealdeer.mk b/package/tealdeer/tealdeer.mk index c396225098..aabfe2983c 100644 --- a/package/tealdeer/tealdeer.mk +++ b/package/tealdeer/tealdeer.mk @@ -4,7 +4,7 @@ # ################################################################################ -TEALDEER_VERSION = 1.5.0 +TEALDEER_VERSION = 1.6.1 TEALDEER_SITE = $(call github,dbrgn,tealdeer,v$(TEALDEER_VERSION)) TEALDEER_LICENSE = Apache-2.0 or MIT TEALDEER_LICENSE_FILES = LICENSE-APACHE LICENSE-MIT From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:08 +0200 Subject: [Buildroot] [git commit] package/faad2: bump to version 2.10.1 Message-ID: <20221027065529.799CA87314@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9376ed7bc46ebed9f97899cface0cd9b386292ba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/knik0/faad2/releases/tag/2.10.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/faad2/faad2.hash | 2 +- package/faad2/faad2.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/faad2/faad2.hash b/package/faad2/faad2.hash index 2eb11d73aa..3a9c36df00 100644 --- a/package/faad2/faad2.hash +++ b/package/faad2/faad2.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0c6d9636c96f95c7d736f097d418829ced8ec6dbd899cc6cc82b728480a84bfb faad2-2.10.0.tar.gz +sha256 4c16c71295ca0cbf7c3dfe98eb11d8fa8d0ac3042e41604cfd6cc11a408cf264 faad2-2.10.1.tar.gz sha256 d3baf3a54943cf12a994c85867a18dec84f810901b2f2878ddfd77efcc3c150f COPYING diff --git a/package/faad2/faad2.mk b/package/faad2/faad2.mk index d085c814bd..eecab35af8 100644 --- a/package/faad2/faad2.mk +++ b/package/faad2/faad2.mk @@ -4,8 +4,8 @@ # ################################################################################ -FAAD2_VERSION = 2.10.0 -FAAD2_SITE = $(call github,knik0,faad2,$(subst .,_,$(FAAD2_VERSION))) +FAAD2_VERSION = 2.10.1 +FAAD2_SITE = $(call github,knik0,faad2,$(FAAD2_VERSION)) FAAD2_LICENSE = GPL-2.0 FAAD2_LICENSE_FILES = COPYING FAAD2_CPE_ID_VENDOR = audiocoding From thomas.petazzoni at bootlin.com Thu Oct 27 06:54:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:54:18 +0200 Subject: [Buildroot] [git commit] package/iproute2: bump to version 6.0.0 Message-ID: <20221027065529.852B687315@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3cf8930508738ccea33448f2e59a15c7eee126b3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches (already in version) Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-ipstats-Add-param.h-for-musl.patch | 29 ------------------- .../0002-ipstats-add-missing-headers.patch | 33 ---------------------- ...efine-_GNU_SOURCE-when-checking-for-setns.patch | 29 ------------------- package/iproute2/iproute2.hash | 2 +- package/iproute2/iproute2.mk | 2 +- 5 files changed, 2 insertions(+), 93 deletions(-) diff --git a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch b/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch deleted file mode 100644 index db6982ab8b..0000000000 --- a/package/iproute2/0001-ipstats-Add-param.h-for-musl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cf6b60c504d4be5e1df2b2745e55d677967831d0 Mon Sep 17 00:00:00 2001 -From: Changhyeok Bae -Date: Tue, 9 Aug 2022 04:01:05 +0000 -Subject: [PATCH] ipstats: Add param.h for musl - -Fix build error for musl -| /usr/src/debug/iproute2/5.19.0-r0/iproute2-5.19.0/ip/ipstats.c:231: undefined reference to `MIN' - -Signed-off-by: Changhyeok Bae -[ upstream status: cf6b60c504d4be5e1df2b2745e55d677967831d0 ] ---- - ip/ipstats.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 5cdd15ae..1ac275bd 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0+ - #include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0002-ipstats-add-missing-headers.patch b/package/iproute2/0002-ipstats-add-missing-headers.patch deleted file mode 100644 index d4b9a5d10d..0000000000 --- a/package/iproute2/0002-ipstats-add-missing-headers.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 28c740473510cd911b97cc5d7d23bd809a0f200b Mon Sep 17 00:00:00 2001 -From: Stephen Hemminger -Date: Tue, 9 Aug 2022 13:27:33 -0700 -Subject: [PATCH] ipstats: add missing headers - -IWYU reports several headers are not explicitly -included by ipstats. - -Signed-off-by: Stephen Hemminger -[ upstream status: 28c740473510cd911b97cc5d7d23bd809a0f200b] ---- - ip/ipstats.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/ip/ipstats.c b/ip/ipstats.c -index 1ac275bd..dadded14 100644 ---- a/ip/ipstats.c -+++ b/ip/ipstats.c -@@ -1,7 +1,11 @@ - // SPDX-License-Identifier: GPL-2.0+ -+#include - #include - #include -+#include -+#include - #include -+#include - - #include "list.h" - #include "utils.h" --- -2.37.2 - diff --git a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch b/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch deleted file mode 100644 index a5076d7711..0000000000 --- a/package/iproute2/0003-configure-Define-_GNU_SOURCE-when-checking-for-setns.patch +++ /dev/null @@ -1,29 +0,0 @@ -From d5fe96ab70928508f072a47449e9b641e46de323 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Wed, 10 Aug 2022 22:34:40 -0700 -Subject: [PATCH] configure: Define _GNU_SOURCE when checking for setns - -glibc defines this function only as gnu extention - -Signed-off-by: Khem Raj -Signed-off-by: Stephen Hemminger -[ upstream status: d5fe96ab70928508f072a47449e9b641e46de323 ] ---- - configure | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/configure b/configure -index 440facb7..c02753bb 100755 ---- a/configure -+++ b/configure -@@ -191,6 +191,7 @@ check_ipt_lib_dir() - check_setns() - { - cat >$TMPDIR/setnstest.c < - int main(int argc, char **argv) - { --- -2.37.2 - diff --git a/package/iproute2/iproute2.hash b/package/iproute2/iproute2.hash index a4b0e62c02..45af05a200 100644 --- a/package/iproute2/iproute2.hash +++ b/package/iproute2/iproute2.hash @@ -1,3 +1,3 @@ # From https://kernel.org/pub/linux/utils/net/iproute2/sha256sums.asc -sha256 26b7a34d6a7fd2f7a42e2b39c5a90cb61bac522d1096067ffeb195e5693d7791 iproute2-5.19.0.tar.xz +sha256 523139e9e72aec996374fa2de74be4c53d2dd05589488934d21ff97bae19580a iproute2-6.0.0.tar.xz sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING diff --git a/package/iproute2/iproute2.mk b/package/iproute2/iproute2.mk index 5c3595d5f4..287c6b14e2 100644 --- a/package/iproute2/iproute2.mk +++ b/package/iproute2/iproute2.mk @@ -4,7 +4,7 @@ # ################################################################################ -IPROUTE2_VERSION = 5.19.0 +IPROUTE2_VERSION = 6.0.0 IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_DEPENDENCIES = host-bison host-flex host-pkgconf \ From thomas.petazzoni at bootlin.com Thu Oct 27 06:56:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 08:56:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221025142929.3089316-1-james.hilliard1@gmail.com> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> Message-ID: <20221027085615.2c78028e@windsurf> On Tue, 25 Oct 2022 08:29:29 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/kmod/kmod.hash | 2 +- > package/kmod/kmod.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) We have a build failure: http://autobuild.buildroot.net/?reason=kmod-30 Not sure if it's new with version 30 or not, though. Could you have a look? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From robimarko at gmail.com Thu Oct 27 08:56:28 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 10:56:28 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package Message-ID: <20221027085628.102086-1-robimarko@gmail.com> mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko --- Changes in v3: * Add dependecy on 5.1 headers Changes in v2: * Correct license * Add host-pkgconf to DEPENDENCIES * Add minimal required kernel config options --- package/Config.in | 1 + package/mdio-tools/Config.in | 10 ++++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ 4 files changed, 34 insertions(+) create mode 100644 package/mdio-tools/Config.in create mode 100644 package/mdio-tools/mdio-tools.hash create mode 100644 package/mdio-tools/mdio-tools.mk diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..ed41e8bdd4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -536,6 +536,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..8a09bf19a7 --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,10 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..308a23824b --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) -- 2.37.3 From robimarko at gmail.com Thu Oct 27 08:56:54 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 10:56:54 +0200 Subject: [Buildroot] [PATCH v2] package/mdio-tools: new package In-Reply-To: References: <20221002150443.159058-1-robimarko@gmail.com> Message-ID: On Wed, 19 Oct 2022 at 18:15, Angelo Compagnucci wrote: > > > > On Sun, Oct 2, 2022 at 5:05 PM Robert Marko wrote: >> >> mdio-tools are kernel module and accompanying tools for low-level >> debugging of devices attached on MDIO bus like PHY-s, switches etc. >> >> Userspace tools provide C22 or C45 reads and writes, benchmarking >> and even dedicated Marvell Link Street tools via the included >> kernel module. >> >> Signed-off-by: Robert Marko >> --- >> Changes in v2: >> * Correct license >> * Add host-pkgconf to DEPENDENCIES >> * Add minimal required kernel config options >> --- >> package/Config.in | 1 + >> package/mdio-tools/Config.in | 9 +++++++++ >> package/mdio-tools/mdio-tools.hash | 3 +++ >> package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ >> 4 files changed, 33 insertions(+) >> create mode 100644 package/mdio-tools/Config.in >> create mode 100644 package/mdio-tools/mdio-tools.hash >> create mode 100644 package/mdio-tools/mdio-tools.mk >> >> diff --git a/package/Config.in b/package/Config.in >> index e3a34d6e97..ed41e8bdd4 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -536,6 +536,7 @@ endmenu >> source "package/mbpfan/Config.in" >> source "package/mdadm/Config.in" >> source "package/mdevd/Config.in" >> + source "package/mdio-tools/Config.in" >> source "package/memtest86/Config.in" >> source "package/memtester/Config.in" >> source "package/memtool/Config.in" >> diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in >> new file mode 100644 >> index 0000000000..feb1e825ac >> --- /dev/null >> +++ b/package/mdio-tools/Config.in >> @@ -0,0 +1,9 @@ >> +comment "mdio-tools needs a Linux kernel to be built" >> + depends on !BR2_LINUX_KERNEL >> + >> +config BR2_PACKAGE_MDIO_TOOLS >> + bool "mdio-tools" >> + depends on BR2_LINUX_KERNEL > > > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > I think you miss this here Thanks, I completely missed it. Added in v3. Regards, Robert > >> >> + select BR2_PACKAGE_LIBMNL >> + help >> + Low-level debug tools for MDIO devices >> diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash >> new file mode 100644 >> index 0000000000..0111165f27 >> --- /dev/null >> +++ b/package/mdio-tools/mdio-tools.hash >> @@ -0,0 +1,3 @@ >> +# Locally computed >> +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz >> +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING >> diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk >> new file mode 100644 >> index 0000000000..308a23824b >> --- /dev/null >> +++ b/package/mdio-tools/mdio-tools.mk >> @@ -0,0 +1,20 @@ >> +################################################################################ >> +# >> +# mdio-tools >> +# >> +################################################################################ >> + >> +MDIO_TOOLS_VERSION = 1.2.0 >> +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) >> +MDIO_TOOLS_LICENSE = GPL-2.0 >> +MDIO_TOOLS_LICENSE_FILES = COPYING >> +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl >> + >> +MDIO_TOOLS_MODULE_SUBDIRS = kernel >> +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS >> + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) >> + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) >> +endef >> + >> +$(eval $(kernel-module)) >> +$(eval $(autotools-package)) >> -- >> 2.37.3 >> >> _______________________________________________ >> buildroot mailing list >> buildroot at buildroot.org >> https://lists.buildroot.org/mailman/listinfo/buildroot > > > > -- > > Angelo Compagnucci > > Software Engineer > > angelo at amarulasolutions.com > __________________________________ > Amarula Solutions SRL > > Via le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 (0)42 243 5310 > info at amarulasolutions.com > > www.amarulasolutions.com > > [`as] https://www.amarulasolutions.com| From thomas.petazzoni at bootlin.com Thu Oct 27 09:52:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:52:44 +0200 Subject: [Buildroot] [git commit] package/mdio-tools: new package Message-ID: <20221027095300.5AAE187326@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8fdf8731e727dc5c2d4080d7a56e1d71dc25e533 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master mdio-tools are kernel module and accompanying tools for low-level debugging of devices attached on MDIO bus like PHY-s, switches etc. Userspace tools provide C22 or C45 reads and writes, benchmarking and even dedicated Marvell Link Street tools via the included kernel module. Signed-off-by: Robert Marko Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/mdio-tools/Config.in | 14 ++++++++++++++ package/mdio-tools/mdio-tools.hash | 3 +++ package/mdio-tools/mdio-tools.mk | 21 +++++++++++++++++++++ 5 files changed, 42 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index bc4640685a..dac8fefd0b 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2510,6 +2510,9 @@ F: package/tzdata/ N: RJ Ascani F: package/azmq/ +N: Robert Marko +F: package/mdio-tools/ + N: Robert Rose F: package/grpc/ diff --git a/package/Config.in b/package/Config.in index ebafe11dea..e4eb2b7434 100644 --- a/package/Config.in +++ b/package/Config.in @@ -537,6 +537,7 @@ endmenu source "package/mbpfan/Config.in" source "package/mdadm/Config.in" source "package/mdevd/Config.in" + source "package/mdio-tools/Config.in" source "package/memtest86/Config.in" source "package/memtester/Config.in" source "package/memtool/Config.in" diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in new file mode 100644 index 0000000000..d63ba8f727 --- /dev/null +++ b/package/mdio-tools/Config.in @@ -0,0 +1,14 @@ +comment "mdio-tools needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL + +comment "mdio-tools needs a toolchain w/ headers >= 5.1" + depends on !BR2_LINUX_KERNEL + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + +config BR2_PACKAGE_MDIO_TOOLS + bool "mdio-tools" + depends on BR2_LINUX_KERNEL + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 + select BR2_PACKAGE_LIBMNL + help + Low-level debug tools for MDIO devices diff --git a/package/mdio-tools/mdio-tools.hash b/package/mdio-tools/mdio-tools.hash new file mode 100644 index 0000000000..0111165f27 --- /dev/null +++ b/package/mdio-tools/mdio-tools.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c5e17431c62392f6c1da1ba4fb0a6f5918521509a377af74485851f93ff2a106 mdio-tools-1.2.0.tar.gz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mdio-tools/mdio-tools.mk b/package/mdio-tools/mdio-tools.mk new file mode 100644 index 0000000000..c4be54142e --- /dev/null +++ b/package/mdio-tools/mdio-tools.mk @@ -0,0 +1,21 @@ +################################################################################ +# +# mdio-tools +# +################################################################################ + +MDIO_TOOLS_VERSION = 1.2.0 +MDIO_TOOLS_SITE = https://github.com/wkz/mdio-tools/releases/download/$(MDIO_TOOLS_VERSION) +MDIO_TOOLS_LICENSE = GPL-2.0 +MDIO_TOOLS_LICENSE_FILES = COPYING +MDIO_TOOLS_DEPENDENCIES = host-pkgconf libmnl + +MDIO_TOOLS_MODULE_SUBDIRS = kernel + +define MDIO_TOOLS_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_MDIO_DEVICE) +endef + +$(eval $(kernel-module)) +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Thu Oct 27 09:55:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:55:29 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package In-Reply-To: <20221027085628.102086-1-robimarko@gmail.com> References: <20221027085628.102086-1-robimarko@gmail.com> Message-ID: <20221027115529.0ac5cb5d@windsurf> Hello Robert, On Thu, 27 Oct 2022 10:56:28 +0200 Robert Marko wrote: > mdio-tools are kernel module and accompanying tools for low-level > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > Userspace tools provide C22 or C45 reads and writes, benchmarking > and even dedicated Marvell Link Street tools via the included > kernel module. > > Signed-off-by: Robert Marko Thanks, I have applied your patch, with two small changes. See below. > package/Config.in | 1 + > package/mdio-tools/Config.in | 10 ++++++++++ > package/mdio-tools/mdio-tools.hash | 3 +++ > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > 4 files changed, 34 insertions(+) The entry in the DEVELOPERS file was missing, so I've added it. > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > new file mode 100644 > index 0000000000..8a09bf19a7 > --- /dev/null > +++ b/package/mdio-tools/Config.in > @@ -0,0 +1,10 @@ > +comment "mdio-tools needs a Linux kernel to be built" > + depends on !BR2_LINUX_KERNEL > + > +config BR2_PACKAGE_MDIO_TOOLS > + bool "mdio-tools" > + depends on BR2_LINUX_KERNEL > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 We like to have a Config.in comment corresponding to this dependency, so I've added it: +comment "mdio-tools needs a toolchain w/ headers >= 5.1" + depends on !BR2_LINUX_KERNEL + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 And I know I realize that the depends on !BR2_LINUX_KERNEL should have been a depends on BR2_LINUX_KERNEL. I will fix that up. Thanks for the contribution! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Thu Oct 27 09:55:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 11:55:40 +0200 Subject: [Buildroot] [git commit] package/mdio-tools: fix Config.in comment dependency Message-ID: <20221027095620.93C498732E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f51600d04ccb20ed5c47b9e0e894fe560f16539e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master We want to show the headers >= 5.1 Config.in comment when the BR2_LINUX_KERNEL is satisfied, not when it isn't. Signed-off-by: Thomas Petazzoni --- package/mdio-tools/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in index d63ba8f727..f24c1a6974 100644 --- a/package/mdio-tools/Config.in +++ b/package/mdio-tools/Config.in @@ -2,7 +2,7 @@ comment "mdio-tools needs a Linux kernel to be built" depends on !BR2_LINUX_KERNEL comment "mdio-tools needs a toolchain w/ headers >= 5.1" - depends on !BR2_LINUX_KERNEL + depends on BR2_LINUX_KERNEL depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 config BR2_PACKAGE_MDIO_TOOLS From robimarko at gmail.com Thu Oct 27 09:58:02 2022 From: robimarko at gmail.com (Robert Marko) Date: Thu, 27 Oct 2022 11:58:02 +0200 Subject: [Buildroot] [PATCH v3] package/mdio-tools: new package In-Reply-To: <20221027115529.0ac5cb5d@windsurf> References: <20221027085628.102086-1-robimarko@gmail.com> <20221027115529.0ac5cb5d@windsurf> Message-ID: On Thu, 27 Oct 2022 at 11:55, Thomas Petazzoni wrote: > > Hello Robert, > > On Thu, 27 Oct 2022 10:56:28 +0200 > Robert Marko wrote: > > > mdio-tools are kernel module and accompanying tools for low-level > > debugging of devices attached on MDIO bus like PHY-s, switches etc. > > > > Userspace tools provide C22 or C45 reads and writes, benchmarking > > and even dedicated Marvell Link Street tools via the included > > kernel module. > > > > Signed-off-by: Robert Marko > > Thanks, I have applied your patch, with two small changes. See below. > > > package/Config.in | 1 + > > package/mdio-tools/Config.in | 10 ++++++++++ > > package/mdio-tools/mdio-tools.hash | 3 +++ > > package/mdio-tools/mdio-tools.mk | 20 ++++++++++++++++++++ > > 4 files changed, 34 insertions(+) > > The entry in the DEVELOPERS file was missing, so I've added it. > > > diff --git a/package/mdio-tools/Config.in b/package/mdio-tools/Config.in > > new file mode 100644 > > index 0000000000..8a09bf19a7 > > --- /dev/null > > +++ b/package/mdio-tools/Config.in > > @@ -0,0 +1,10 @@ > > +comment "mdio-tools needs a Linux kernel to be built" > > + depends on !BR2_LINUX_KERNEL > > + > > +config BR2_PACKAGE_MDIO_TOOLS > > + bool "mdio-tools" > > + depends on BR2_LINUX_KERNEL > > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > We like to have a Config.in comment corresponding to this dependency, > so I've added it: > > +comment "mdio-tools needs a toolchain w/ headers >= 5.1" > + depends on !BR2_LINUX_KERNEL > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > > And I know I realize that the depends on !BR2_LINUX_KERNEL should have > been a depends on BR2_LINUX_KERNEL. I will fix that up. Thanks for fixing it up, it is my first time contributing to Buildroot so its all a bit new to me. Regards, Robert > > Thanks for the contribution! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From baruch at tkos.co.il Thu Oct 27 10:37:17 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Thu, 27 Oct 2022 13:37:17 +0300 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 Message-ID: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses cookies from an HTTP(S) server, it accepts cookies using control codes (byte values below 32). When cookies that contain such control codes are later sent back to an HTTP(S) server, it might make the server return a 400 response. Effectively allowing a "sister site" to deny service to siblings. Drop upstream patches and autoreconf. Cc: Matt Weber Signed-off-by: Baruch Siach --- ...de-sched-h-if-available-to-fix-build.patch | 30 -------- ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- package/libcurl/libcurl.hash | 2 +- package/libcurl/libcurl.mk | 4 +- 4 files changed, 2 insertions(+), 104 deletions(-) delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch diff --git a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch b/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch deleted file mode 100644 index b5f0a8721824..000000000000 --- a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e2e7f54b7bea521fa8373095d0f43261a720cda0 Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Mon, 27 Jun 2022 08:46:21 +0200 -Subject: [PATCH] easy_lock.h: include sched.h if available to fix build - -Patched-by: Harry Sintonen - -Closes #9054 - -[Retrieved from: -https://github.com/curl/curl/commit/e2e7f54b7bea521fa8373095d0f43261a720cda0] -Signed-off-by: Fabrice Fontaine ---- - lib/easy_lock.h | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/lib/easy_lock.h b/lib/easy_lock.h -index 819f50ce815b8..1f54289ceb2d3 100644 ---- a/lib/easy_lock.h -+++ b/lib/easy_lock.h -@@ -36,6 +36,9 @@ - - #elif defined (HAVE_ATOMIC) - #include -+#if defined(HAVE_SCHED_YIELD) -+#include -+#endif - - #define curl_simple_lock atomic_bool - #define CURL_SIMPLE_LOCK_INIT false diff --git a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch b/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch deleted file mode 100644 index 083238819b1b..000000000000 --- a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch +++ /dev/null @@ -1,70 +0,0 @@ -From a68074b5db2a1fb637853b808e5b263c2ce9cbdd Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Tue, 28 Jun 2022 08:37:22 +0200 -Subject: [PATCH] configure: check for the stdatomic.h header in configure - -... and only set HAVE_ATOMIC if that header exists since we use -typedefes set in it. - -Reported-by: Ryan Schmidt -Fixes #9059 -Closes #9060 - -Signed-off-by: Baruch Siach ---- -Upstream status: commit a68074b5db2a1fb637853b808e5b263c2ce9cbdd - - m4/curl-functions.m4 | 36 +++++++++++++++++++----------------- - 1 file changed, 19 insertions(+), 17 deletions(-) - -diff --git a/m4/curl-functions.m4 b/m4/curl-functions.m4 -index ec406f56aed8..f3e12a53a9fd 100644 ---- a/m4/curl-functions.m4 -+++ b/m4/curl-functions.m4 -@@ -6570,24 +6570,26 @@ AC_DEFUN([CURL_COVERAGE],[ - ]) - - dnl CURL_ATOMIC --dnl -------------------------------------------------- --dnl Check if _Atomic works -+dnl ------------------------------------------------------------- -+dnl Check if _Atomic works. But only check if stdatomic.h exists. - dnl - AC_DEFUN([CURL_ATOMIC],[ -- AC_MSG_CHECKING([if _Atomic is available]) -- AC_COMPILE_IFELSE([ -- AC_LANG_PROGRAM([[ -- $curl_includes_unistd -- ]],[[ -- _Atomic int i = 0; -- ]]) -- ],[ -- AC_MSG_RESULT([yes]) -- AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -- [Define to 1 if you have _Atomic support.]) -- tst_atomic="yes" -- ],[ -- AC_MSG_RESULT([no]) -- tst_atomic="no" -+ AC_CHECK_HEADERS(stdatomic.h, [ -+ AC_MSG_CHECKING([if _Atomic is available]) -+ AC_COMPILE_IFELSE([ -+ AC_LANG_PROGRAM([[ -+ $curl_includes_unistd -+ ]],[[ -+ _Atomic int i = 0; -+ ]]) -+ ],[ -+ AC_MSG_RESULT([yes]) -+ AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -+ [Define to 1 if you have _Atomic support.]) -+ tst_atomic="yes" -+ ],[ -+ AC_MSG_RESULT([no]) -+ tst_atomic="no" -+ ]) - ]) - ]) --- -2.35.1 - diff --git a/package/libcurl/libcurl.hash b/package/libcurl/libcurl.hash index 672591e470bd..c0e2378cac76 100644 --- a/package/libcurl/libcurl.hash +++ b/package/libcurl/libcurl.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature # https://curl.se/download/curl-7.84.0.tar.xz.asc # signed with key 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2 -sha256 2d118b43f547bfe5bae806d8d47b4e596ea5b25a6c1f080aef49fbcd817c5db8 curl-7.84.0.tar.xz +sha256 2d61116e5f485581f6d59865377df4463f2e788677ac43222b496d4e49fb627b curl-7.86.0.tar.xz sha256 321b1a09ebc30410f2e837c072e5521cf7095b757193af4a7dae1086e36ed31a COPYING diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 9614ba514394..3c3ad082fc65 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCURL_VERSION = 7.84.0 +LIBCURL_VERSION = 7.86.0 LIBCURL_SOURCE = curl-$(LIBCURL_VERSION).tar.xz LIBCURL_SITE = https://curl.se/download LIBCURL_DEPENDENCIES = host-pkgconf \ @@ -15,8 +15,6 @@ LIBCURL_LICENSE_FILES = COPYING LIBCURL_CPE_ID_VENDOR = haxx LIBCURL_CPE_ID_PRODUCT = libcurl LIBCURL_INSTALL_STAGING = YES -# We are patching configure.ac -LIBCURL_AUTORECONF = YES # We disable NTLM support because it uses fork(), which doesn't work # on non-MMU platforms. Moreover, this authentication method is -- 2.35.1 From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:15 +0200 Subject: [Buildroot] [git commit] package/libpfm4: bump to version 4.12.0 Message-ID: <20221027104941.A02EB8734D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e75c1d888bca57076807c74b48cd01f940832e85 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Major updates: - Add IBM Power10 core PMU support - Add Intel IcelakeX core PMU support - Add Intel SapphireRapid core PMU support - Add Intel SapphireRapid RAPL PMU support - Update Intel Icelake RAPL PMU support - Add support HiSilicon Kunpeng uncore PMUs - Add support HiSilicon Kunpeng core PMU - Remove arm_fujitsu_a64fx_support for ARM(32 bit) - Update Intel Skylake event table - Add Intel PERF_METRICS event support for Icelake - Add support for ARM Neoverse N2 core PMU - Add ARM SPE events for Neoverse N1 core PMU - Add cgroup-switches software event - Add Intel Tigerlake and Rocketlake core PMU support - Add AMD64 Fam19h Zen3 L3 PMU support - Add AMD64 Fam17h Zen2 RAPL support - Add AMD64 Fam19h Zen3 core PMU support - Add RAPL for AMD64 Fam19h Zen3 processor - Update ARM N1 event table - Update AMD Fam17h Zen2 event table - s390: Update counter definition for IBM z16 https://perfmon2.sourceforge.net/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpfm4/libpfm4.hash | 6 +++--- package/libpfm4/libpfm4.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/libpfm4/libpfm4.hash b/package/libpfm4/libpfm4.hash index bdc7806a7c..42740adb1e 100644 --- a/package/libpfm4/libpfm4.hash +++ b/package/libpfm4/libpfm4.hash @@ -1,6 +1,6 @@ # From http://sourceforge.net/projects/perfmon2/files/libpfm4/: -sha1 112bced9a67d565ff0ce6c2bb90452516d1183e5 libpfm-4.11.0.tar.gz -md5 4811c1d99b95752b4ba53b89a9389ec3 libpfm-4.11.0.tar.gz +sha1 4c61cfb489426d9fff15428cb8536ba0e391c8ac libpfm-4.12.0.tar.gz +md5 9e4f9b89d23171eb9314a948a51b4284 libpfm-4.12.0.tar.gz # Locally calculated -sha256 5da5f8872bde14b3634c9688d980f68bda28b510268723cc12973eedbab9fecc libpfm-4.11.0.tar.gz +sha256 4b0c1f53f39a61525b69bebf532c68040c1b984d7544a8ae0844b13cd91e1ee4 libpfm-4.12.0.tar.gz sha256 beef323d68fc5db9c67b20e8e9de7ccde371d20cdbcdd686804055b18b926d90 COPYING diff --git a/package/libpfm4/libpfm4.mk b/package/libpfm4/libpfm4.mk index 2144766d96..7165d78cd9 100644 --- a/package/libpfm4/libpfm4.mk +++ b/package/libpfm4/libpfm4.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPFM4_VERSION = 4.11.0 +LIBPFM4_VERSION = 4.12.0 LIBPFM4_SOURCE = libpfm-$(LIBPFM4_VERSION).tar.gz LIBPFM4_SITE = http://downloads.sourceforge.net/project/perfmon2/libpfm4 LIBPFM4_LICENSE = libpfm4 license From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:21 +0200 Subject: [Buildroot] [git commit] package/ksmbd-tools: bump to version 3.4.6 Message-ID: <20221027104941.AAAB78732D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=559a46ff348c73567d357e23b5458c42b8364603 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/ksmbd-tools/ksmbd-tools.hash | 2 +- package/ksmbd-tools/ksmbd-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ksmbd-tools/ksmbd-tools.hash b/package/ksmbd-tools/ksmbd-tools.hash index 589128c189..b31c66bbe7 100644 --- a/package/ksmbd-tools/ksmbd-tools.hash +++ b/package/ksmbd-tools/ksmbd-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 c1b9096f37eddaced055dfc90a9ed06ceb9e8ceb608ed46c51ed5a2c901ddc81 ksmbd-tools-3.4.5.tar.gz +sha256 09ab343e9bf10ddfdd3216f400b19740a391645bf3645fa6f136b8da36306559 ksmbd-tools-3.4.6.tar.gz sha256 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de COPYING diff --git a/package/ksmbd-tools/ksmbd-tools.mk b/package/ksmbd-tools/ksmbd-tools.mk index e7f2bf91bc..c4f9c503e6 100644 --- a/package/ksmbd-tools/ksmbd-tools.mk +++ b/package/ksmbd-tools/ksmbd-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -KSMBD_TOOLS_VERSION = 3.4.5 +KSMBD_TOOLS_VERSION = 3.4.6 KSMBD_TOOLS_SITE = https://github.com/cifsd-team/ksmbd-tools/releases/download/$(KSMBD_TOOLS_VERSION) KSMBD_TOOLS_LICENSE = GPL-2.0+ KSMBD_TOOLS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Thu Oct 27 10:49:30 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 12:49:30 +0200 Subject: [Buildroot] [git commit] package/libgee: bump to version 0.20.6 Message-ID: <20221027104941.B33368734F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f69217158fc4d2af3a640b25309ae7d621fe1bd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libgee/libgee.hash | 4 ++-- package/libgee/libgee.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libgee/libgee.hash b/package/libgee/libgee.hash index 54a46f954c..ea723481e4 100644 --- a/package/libgee/libgee.hash +++ b/package/libgee/libgee.hash @@ -1,5 +1,5 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.5.sha256sum -sha256 31863a8957d5a727f9067495cabf0a0889fa5d3d44626e54094331188d5c1518 libgee-0.20.5.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libgee/0.20/libgee-0.20.6.sha256sum +sha256 1bf834f5e10d60cc6124d74ed3c1dd38da646787fbf7872220b8b4068e476d4d libgee-0.20.6.tar.xz # Hash for license file: sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING diff --git a/package/libgee/libgee.mk b/package/libgee/libgee.mk index 7d8d3d4863..5ce56a2b3b 100644 --- a/package/libgee/libgee.mk +++ b/package/libgee/libgee.mk @@ -5,7 +5,7 @@ ################################################################################ LIBGEE_VERSION_MAJOR = 0.20 -LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).5 +LIBGEE_VERSION = $(LIBGEE_VERSION_MAJOR).6 LIBGEE_SITE = http://ftp.gnome.org/pub/gnome/sources/libgee/$(LIBGEE_VERSION_MAJOR) LIBGEE_SOURCE = libgee-$(LIBGEE_VERSION).tar.xz LIBGEE_DEPENDENCIES = host-pkgconf host-vala libglib2 From Alexey.Brodkin at synopsys.com Thu Oct 27 14:10:42 2022 From: Alexey.Brodkin at synopsys.com (Alexey Brodkin) Date: Thu, 27 Oct 2022 14:10:42 +0000 Subject: [Buildroot] [PATCH] package/numactl: point to target libs via LDFLAGS In-Reply-To: <20221024231423.24f384e3@windsurf> References: <20221024174911.75444-1-abrodkin@synopsys.com> <20221024231423.24f384e3@windsurf> Message-ID: Hello, Thomas! > On Mon, 24 Oct 2022 19:49:11 +0200 > Alexey Brodkin via buildroot wrote: > > > In the commit a699a667bd64 ("package/numactl: add -latomic to numa.pc") > > we opted-out from unconditional linking with "-latomic" and made it > > a conditional based on real availability of __atomic_fetch_and_1() > > in the toolchain. I.e. for many targets "-latomic" was not used > > any longer. > > > > And in those supposedly rare cases when libatomic was required it was > > all OK until there's a LD_LIBRARY_PATH set with something where yet > > another libatomic.so instance exists, especially if that's the one from > > host (in my case I used a separately built host toolchain). Then we see: > > ---------------------->8-----------------------? > > /bin/sh ./libtool? --tag=CC?? --mode=link .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64? -Os -g0? -Wl,-z,max-page-size=4096 -fPIC -std=gnu99??? -o numastat numastat-numastat.o? -latomic > > > > libtool: link: .../buildroot/output/host/bin/arc32-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -Wl,-z -Wl,max-page-size=4096 -fPIC -std=gnu99 -o numastat numastat-numastat.o? .../gcc-5.2.0/lib/../lib64/libatomic.so -pthread -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 -Wl,-rpath -Wl,.../gcc-5.2.0/lib/../lib64 > > .../buildroot/output/host/lib/gcc/arc32-buildroot-linux-uclibc/12.2.1/../../../../arc32-buildroot-linux-uclibc/bin/ld: .../gcc-5.2.0/lib/../lib64/libatomic.so: error adding symbols: file in wrong format > > collect2: error: ld returned 1 exit status > > ---------------------->8-----------------------? > > > > That happens because libtool of numactl adds contents of the aforementioned > > LD_LIBRARY_PATH to its "$searchdirs" and then the first libatomic.so it > > finds becomes the one used for linking. What's more our precios cross-built > > libatomic.so never even gets considered because that first found libatomic.so > > is used with full path, not as "-latomic" as otherwise it would have been used > > without helpful libtool. > > Thanks for the patch. However, I don't get it. Where is LD_LIBRARY_PATH > defined? I meant LD_LIBRARY_PATH is defined before Buildroot's top-level make invocation, i.e. "LD_LIBRARY_PATH=_some_location_of_hosts_libatomic.so_ make". See below. > Do you have a reproducer for this issue? Yes, I have finally. It took me a bit longer than expected to figure out all the details, thus answering that late. So there're a couple of prerequsites for the reproduction even on vanilla "numactl" sources, I used 2.0.14 with the Buildroot's libatomic patch [1]: 1. For example in my Ubuntu 20.04 on x86_64 I installed ARM cross-tools with: ----------------------------->8----------------------------- apt install gcc-9-arm-linux-gnueabi ----------------------------->8----------------------------- 2. LD_LIBRARY_PATH which points to a location of a foreign (e.g. host or some other architecture) "libatomic.so", plus (that's really important) right there side-by-side with "libatomic.so" it's important to have "libatomic.la" (valid libtool archive, and not an empty file, see below my copy which works for the reproduction). I.e. ----------------------------->8----------------------------- export LD_LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/9/ ----------------------------->8----------------------------- 3. Configure "numactl" with `lt_cv_sys_lib_search_path_spec=""`, which we exactly do in Buildroot, see [2], i.e.: ----------------------------->8----------------------------- ./configure --host=arm-linux-gnueabi lt_cv_sys_lib_search_path_spec="" ----------------------------->8----------------------------- 4. Try to build now: ----------------------------->8----------------------------- make V=1 make all-am make[1]: Entering directory 'numactl' /bin/bash ./libtool --tag=CC --mode=link arm-linux-gnueabi-gcc -g -O2 -version-info 1:0:0 -Wl,--version-script,./versions.ldscript -Wl,-init,numa_init -Wl,-fini,numa_fini -o libnuma.la -rpath /usr/local/lib libnuma.lo syscall.lo distance.lo affinity.lo sysfs.lo rtnetlink.lo -latomic libtool: warning: library '/usr/lib/gcc/x86_64-linux-gnu/9//libatomic.la' was moved. libtool: link: arm-linux-gnueabi-gcc -shared -fPIC -DPIC .libs/libnuma.o .libs/syscall.o .libs/distance.o .libs/affinity.o .libs/sysfs.o .libs/rtnetlink.o -Wl,-rpath -Wl,/usr/lib/gcc/x86_64-linux-gnu/9/ -Wl,-rpath -Wl,/usr/lib/gcc/x86_64-linux-gnu/9/ /usr/lib/gcc/x86_64-linux-gnu/9//libatomic.so -g -O2 -Wl,--version-script -Wl,./versions.ldscript -Wl,-init -Wl,numa_init -Wl,-fini -Wl,numa_fini -pthread -Wl,-soname -Wl,libnuma.so.1 -o .libs/libnuma.so.1.0.0 /usr/lib/gcc/x86_64-linux-gnu/9//libatomic.so: file not recognized: file format not recognized collect2: error: ld returned 1 exit status make[1]: *** [Makefile:889: libnuma.la] Error 1 make[1]: Leaving directory 'numactl' make: *** [Makefile:742: all] Error 2 ----------------------------->8----------------------------- So, what happens (3) removes compiler's default paths from libtool's "sys_lib_dlsearch_path", while (2) makes libtool think that libatomic.so from LD_LIBRARY_PATH is the right one. > > +NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" \ > > +??????????????? LDFLAGS="$(TARGET_LDFLAGS) -L$(STAGING_DIR)/lib" > > This is really a red flag, $(STAGING_DIR)/lib is already in the default > search path of the compiler, so that should never be needed. Well, if we don't mess with "lt_cv_sys_lib_search_path_spec" in the configure script options, then all works OK, but I guess Peter's change made in 2011 makes some sense and we don't want to revert it, or do we? Also, I accept the fact that my setup is a bit unusual at least and it might be a good enough reason to disregard all that discussion, but first I'd like to make sure we really don't care about situations like that: LD_LIBRARY_PATH pointing to a self-built toolchain. If we assume that situation as one of possible corner-cases, then probably we may want to troubleshoot such funny things which happen due to "libtool" smarts. -Alexey [1] https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 [2] https://git.buildroot.net/buildroot/commit/?id=6246704008ef219257f30a824903855d0e00cffb ----------------------------->8----------------------------- Contents of "/usr/lib/gcc/x86_64-linux-gnu/9/libatomic.la" ----------------------------->8----------------------------- # libatomic.la - a libtool library file # Generated by libtool (GNU libtool 1.3134 2009-11-29) 2.2.7a # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='libatomic.so.1' # Names of this library. library_names='libatomic.so.1.2.0 libatomic.so.1 libatomic.so' # The name of the static archive. old_library='libatomic.a' # Linker flags that can not go in dependency_libs. inherited_linker_flags=' -pthread' # Libraries that this one depends upon. dependency_libs='' # Names of additional weak libraries provided by this library weak_library_names='' # Version information for libatomic. current=3 age=2 revision=0 # Is this an already installed library? installed=yes # Should we warn about portability when linking against -modules? shouldnotlink=no # Files to dlopen/dlpreopen dlopen='' dlpreopen='' # Directory that this library needs to be installed in: libdir='/usr/lib/x86_64-linux-gnu/' ----------------------------->8----------------------------- From festevam at gmail.com Thu Oct 27 14:22:37 2022 From: festevam at gmail.com (Fabio Estevam) Date: Thu, 27 Oct 2022 11:22:37 -0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: <20221022142040.625468-1-ju.o@free.fr> References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: Hi Julien, On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: > > imx8{m,mm}pico configs are currently failing at ATF link with output: > > aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > The ATF version in those configs does not provide platform level > support for SSP. > > This build failure was introduced by commit > 09acc7cbc91f50305730ca0690a58fb93529034b > "boot/arm-trusted-firmware: fix SSP support". Before this commit, > ATF SSP was globally disabled, by default. > > This commit fixes those build issues by disabling the ATF SSP in the > defconfigs. > > Fixes: > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 > > Signed-off-by: Julien Olivain I met the same build error when trying to build kontron_bl_imx8mm_defconfig. Tried your suggestion and it fixes the build error: diff --git a/configs/kontron_bl_imx8mm_defconfig b/configs/kontron_bl_imx8mm_defconfig index ff376662e9e5..b05828981081 100644 --- a/configs/kontron_bl_imx8mm_defconfig +++ b/configs/kontron_bl_imx8mm_defconfig @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y Does this need to be fixed globally? I suspect other defconfigs face the same error. Thanks From heiko.thiery at gmail.com Thu Oct 27 14:33:58 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Thu, 27 Oct 2022 16:33:58 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: Hi, Am Do., 27. Okt. 2022 um 16:22 Uhr schrieb Fabio Estevam : > > Hi Julien, > > On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: > > > > imx8{m,mm}pico configs are currently failing at ATF link with output: > > > > aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > > > The ATF version in those configs does not provide platform level > > support for SSP. > > > > This build failure was introduced by commit > > 09acc7cbc91f50305730ca0690a58fb93529034b > > "boot/arm-trusted-firmware: fix SSP support". Before this commit, > > ATF SSP was globally disabled, by default. > > > > This commit fixes those build issues by disabling the ATF SSP in the > > defconfigs. > > > > Fixes: > > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 > > - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 > > > > Signed-off-by: Julien Olivain > > I met the same build error when trying to build kontron_bl_imx8mm_defconfig. > > Tried your suggestion and it fixes the build error: > > diff --git a/configs/kontron_bl_imx8mm_defconfig > b/configs/kontron_bl_imx8mm_defconfig > index ff376662e9e5..b05828981081 100644 > --- a/configs/kontron_bl_imx8mm_defconfig > +++ b/configs/kontron_bl_imx8mm_defconfig > @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set > BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > > Does this need to be fixed globally? I suspect other defconfigs face > the same error. I see the same issue with the kontron_pitx_imx8m_defconfig. -- Heiko > > Thanks From baruch at tkos.co.il Thu Oct 27 15:21:03 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Thu, 27 Oct 2022 18:21:03 +0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> Message-ID: <877d0ls30z.fsf@tarshish> Hi Fabio, On Thu, Oct 27 2022, Fabio Estevam wrote: > On Sat, Oct 22, 2022 at 11:21 AM Julien Olivain wrote: >> >> imx8{m,mm}pico configs are currently failing at ATF link with output: >> >> aarch64-buildroot-linux-gnu-ld: asm_stack_protector.o: in function `update_stack_protector_canary': >> (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' >> >> The ATF version in those configs does not provide platform level >> support for SSP. >> >> This build failure was introduced by commit >> 09acc7cbc91f50305730ca0690a58fb93529034b >> "boot/arm-trusted-firmware: fix SSP support". Before this commit, >> ATF SSP was globally disabled, by default. >> >> This commit fixes those build issues by disabling the ATF SSP in the >> defconfigs. >> >> Fixes: >> - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498119 >> - https://gitlab.com/buildroot.org/buildroot/-/jobs/3200498120 >> >> Signed-off-by: Julien Olivain > > I met the same build error when trying to build kontron_bl_imx8mm_defconfig. > > Tried your suggestion and it fixes the build error: > > diff --git a/configs/kontron_bl_imx8mm_defconfig > b/configs/kontron_bl_imx8mm_defconfig > index ff376662e9e5..b05828981081 100644 > --- a/configs/kontron_bl_imx8mm_defconfig > +++ b/configs/kontron_bl_imx8mm_defconfig > @@ -34,6 +34,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" > BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > +# BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set > BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000" > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > > Does this need to be fixed globally? I suspect other defconfigs face > the same error. The global fix might be this: diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b43..a9b9bbcc5a1f 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") mentions that not all platform implement the require hook for SSP. So I think that enabling SSP by default is not the right choice. baruch -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il - From tobias at waldekranz.com Thu Oct 27 20:27:25 2022 From: tobias at waldekranz.com (Tobias Waldekranz) Date: Thu, 27 Oct 2022 22:27:25 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <20221027084900.0844e13a@windsurf> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> <20221027084900.0844e13a@windsurf> Message-ID: <871qqt9fma.fsf@waldekranz.com> On tor, okt 27, 2022 at 08:49, Thomas Petazzoni via buildroot wrote: ... > Applied with those changes, thanks! Thanks for going the extra mile! Hopefully the next series won't require as much work from your end. -- Tobias From dave-git at centerclick.org Thu Oct 27 20:30:39 2022 From: dave-git at centerclick.org (David Johnson) Date: Thu, 27 Oct 2022 16:30:39 -0400 Subject: [Buildroot] [PATCH 1/1] package/tzdata: install leap-seconds.list into results Message-ID: <20221027203039.1004439-1-dave-git@centerclick.org> add leap-seconds.list to installed files so it can be used by other packages specifically, ntpd's ntp.conf can now include: leapfile /usr/share/zoneinfo/leap-seconds.list Signed-off-by: David Johnson --- package/tzdata/tzdata.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/tzdata/tzdata.mk b/package/tzdata/tzdata.mk index 21ea94ecad..7a1a77fcd9 100644 --- a/package/tzdata/tzdata.mk +++ b/package/tzdata/tzdata.mk @@ -59,7 +59,7 @@ endef define HOST_TZDATA_INSTALL_CMDS $(INSTALL) -d -m 0755 $(HOST_DIR)/share/zoneinfo - cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/share/zoneinfo + cp -a $(@D)/_output/* $(@D)/*.tab $(@D)/leap-seconds.list $(HOST_DIR)/share/zoneinfo endef $(eval $(generic-package)) -- 2.30.2 From thomas.petazzoni at bootlin.com Thu Oct 27 21:32:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Thu, 27 Oct 2022 23:32:34 +0200 Subject: [Buildroot] [PATCH 4/4] package/kmemd: new package In-Reply-To: <871qqt9fma.fsf@waldekranz.com> References: <20221020141412.346992-1-tobias@waldekranz.com> <20221020141412.346992-5-tobias@waldekranz.com> <20221027084900.0844e13a@windsurf> <871qqt9fma.fsf@waldekranz.com> Message-ID: <20221027233234.6ee18998@windsurf> On Thu, 27 Oct 2022 22:27:25 +0200 Tobias Waldekranz wrote: > Thanks for going the extra mile! > > Hopefully the next series won't require as much work from your end. Oh, no worries, your patch series was actually very good! There was not much to adjust before committing. Looking forward for more contributions from you! Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From james.hilliard1 at gmail.com Thu Oct 27 22:48:11 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Thu, 27 Oct 2022 18:48:11 -0400 Subject: [Buildroot] [PATCH 1/1] package/kmod: bump to version 30 In-Reply-To: <20221027085615.2c78028e@windsurf> References: <20221025142929.3089316-1-james.hilliard1@gmail.com> <20221027085615.2c78028e@windsurf> Message-ID: On Thu, Oct 27, 2022 at 2:56 AM Thomas Petazzoni wrote: > > On Tue, 25 Oct 2022 08:29:29 -0600 > James Hilliard wrote: > > > Signed-off-by: James Hilliard > > --- > > package/kmod/kmod.hash | 2 +- > > package/kmod/kmod.mk | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > We have a build failure: > > http://autobuild.buildroot.net/?reason=kmod-30 > > Not sure if it's new with version 30 or not, though. Could you have a > look? It's not new, but seems somewhat rare: http://autobuild.buildroot.net/?reason=kmod-% Same failure in version 29: http://autobuild.buildroot.net/results/e5b/e5bdd8a04d845667f4234867625c3d8e482b3e21 > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com From festevam at gmail.com Fri Oct 28 03:03:59 2022 From: festevam at gmail.com (Fabio Estevam) Date: Fri, 28 Oct 2022 00:03:59 -0300 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: <877d0ls30z.fsf@tarshish> References: <20221022142040.625468-1-ju.o@free.fr> <877d0ls30z.fsf@tarshish> Message-ID: Hi Baruch, On Thu, Oct 27, 2022 at 12:24 PM Baruch Siach wrote: > The global fix might be this: > > diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in > index 5070849d9b43..a9b9bbcc5a1f 100644 > --- a/boot/arm-trusted-firmware/Config.in > +++ b/boot/arm-trusted-firmware/Config.in > @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN > > config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP > bool "Build with SSP" > - default y > depends on BR2_TOOLCHAIN_HAS_SSP > depends on !BR2_SSP_NONE > help > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > mentions that not all platform implement the require hook for SSP. So I > think that enabling SSP by default is not the right choice. Yes, that is a proper fix. Thanks From heiko.thiery at gmail.com Fri Oct 28 04:59:30 2022 From: heiko.thiery at gmail.com (Heiko Thiery) Date: Fri, 28 Oct 2022 06:59:30 +0200 Subject: [Buildroot] [PATCH 1/1] configs/imx8{m, mm}pico: disable ATF SSP In-Reply-To: References: <20221022142040.625468-1-ju.o@free.fr> <877d0ls30z.fsf@tarshish> Message-ID: Hi, Am Fr., 28. Okt. 2022 um 05:04 Uhr schrieb Fabio Estevam : > > Hi Baruch, > > On Thu, Oct 27, 2022 at 12:24 PM Baruch Siach wrote: > > > The global fix might be this: > > > > diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in > > index 5070849d9b43..a9b9bbcc5a1f 100644 > > --- a/boot/arm-trusted-firmware/Config.in > > +++ b/boot/arm-trusted-firmware/Config.in > > @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN > > > > config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP > > bool "Build with SSP" > > - default y > > depends on BR2_TOOLCHAIN_HAS_SSP > > depends on !BR2_SSP_NONE > > help > > > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > > mentions that not all platform implement the require hook for SSP. So I > > think that enabling SSP by default is not the right choice. > > Yes, that is a proper fix. > > Thanks I can also confirm that it works again with the change. -- Heiko From baruch at tkos.co.il Fri Oct 28 05:36:27 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Fri, 28 Oct 2022 08:36:27 +0300 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default Message-ID: SSP support requires support in ATF platform code. Not all platforms implement plat_get_stack_protector_canary() hook. The result is build failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") originally introduces this issue. But then commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid the problem by effectively disabling SSP for all platforms. So only after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP support") the issue showed up. Make SSP an opt-in for platform that actually provide the plat_get_stack_protector_canary() hook. Cc: Sergey Matyukevich Cc: Dick Olsson Tested-by: Heiko Thiery Signed-off-by: Baruch Siach --- boot/arm-trusted-firmware/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b43..a9b9bbcc5a1f 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help -- 2.35.1 From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpfm4: bump to version 4.12.0 In-Reply-To: <20221016211517.58308-1-fontaine.fabrice@gmail.com> References: <20221016211517.58308-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084439.36374fd6@windsurf> On Sun, 16 Oct 2022 23:15:17 +0200 Fabrice Fontaine wrote: > Major updates: > - Add IBM Power10 core PMU support > - Add Intel IcelakeX core PMU support > - Add Intel SapphireRapid core PMU support > - Add Intel SapphireRapid RAPL PMU support > - Update Intel Icelake RAPL PMU support > - Add support HiSilicon Kunpeng uncore PMUs > - Add support HiSilicon Kunpeng core PMU > - Remove arm_fujitsu_a64fx_support for ARM(32 bit) > - Update Intel Skylake event table > - Add Intel PERF_METRICS event support for Icelake > - Add support for ARM Neoverse N2 core PMU > - Add ARM SPE events for Neoverse N1 core PMU > - Add cgroup-switches software event > - Add Intel Tigerlake and Rocketlake core PMU support > - Add AMD64 Fam19h Zen3 L3 PMU support > - Add AMD64 Fam17h Zen2 RAPL support > - Add AMD64 Fam19h Zen3 core PMU support > - Add RAPL for AMD64 Fam19h Zen3 processor > - Update ARM N1 event table > - Update AMD Fam17h Zen2 event table > - s390: Update counter definition for IBM z16 > > https://perfmon2.sourceforge.net/ > > Signed-off-by: Fabrice Fontaine > --- > package/libpfm4/libpfm4.hash | 6 +++--- > package/libpfm4/libpfm4.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/ksmbd-tools: bump to version 3.4.6 In-Reply-To: <20221016212707.315323-1-fontaine.fabrice@gmail.com> References: <20221016212707.315323-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084448.53390494@windsurf> On Sun, 16 Oct 2022 23:27:07 +0200 Fabrice Fontaine wrote: > https://github.com/cifsd-team/ksmbd-tools/releases/tag/3.4.6 > > Signed-off-by: Fabrice Fontaine > --- > package/ksmbd-tools/ksmbd-tools.hash | 2 +- > package/ksmbd-tools/ksmbd-tools.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:44:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:44:57 +0200 Subject: [Buildroot] [PATCH 1/1] package/libgee: bump to version 0.20.6 In-Reply-To: <20221016212744.315519-1-fontaine.fabrice@gmail.com> References: <20221016212744.315519-1-fontaine.fabrice@gmail.com> Message-ID: <20221028084457.7e0cd250@windsurf> On Sun, 16 Oct 2022 23:27:44 +0200 Fabrice Fontaine wrote: > https://gitlab.gnome.org/GNOME/libgee/-/blob/0.20.6/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libgee/libgee.hash | 4 ++-- > package/libgee/libgee.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:07 +0200 Subject: [Buildroot] [git commit] libcurl: security bump to version 7.86.0 Message-ID: <20221028064519.DED238734D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=400b63432ed0b0c2dee889cf4f2fed88c56a0eb5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses cookies from an HTTP(S) server, it accepts cookies using control codes (byte values below 32). When cookies that contain such control codes are later sent back to an HTTP(S) server, it might make the server return a 400 response. Effectively allowing a "sister site" to deny service to siblings. Drop upstream patches and autoreconf. Cc: Matt Weber Signed-off-by: Baruch Siach Signed-off-by: Thomas Petazzoni --- ...include-sched-h-if-available-to-fix-build.patch | 30 ---------- ...heck-for-the-stdatomic.h-header-in-config.patch | 70 ---------------------- package/libcurl/libcurl.hash | 2 +- package/libcurl/libcurl.mk | 4 +- 4 files changed, 2 insertions(+), 104 deletions(-) diff --git a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch b/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch deleted file mode 100644 index b5f0a87218..0000000000 --- a/package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e2e7f54b7bea521fa8373095d0f43261a720cda0 Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Mon, 27 Jun 2022 08:46:21 +0200 -Subject: [PATCH] easy_lock.h: include sched.h if available to fix build - -Patched-by: Harry Sintonen - -Closes #9054 - -[Retrieved from: -https://github.com/curl/curl/commit/e2e7f54b7bea521fa8373095d0f43261a720cda0] -Signed-off-by: Fabrice Fontaine ---- - lib/easy_lock.h | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/lib/easy_lock.h b/lib/easy_lock.h -index 819f50ce815b8..1f54289ceb2d3 100644 ---- a/lib/easy_lock.h -+++ b/lib/easy_lock.h -@@ -36,6 +36,9 @@ - - #elif defined (HAVE_ATOMIC) - #include -+#if defined(HAVE_SCHED_YIELD) -+#include -+#endif - - #define curl_simple_lock atomic_bool - #define CURL_SIMPLE_LOCK_INIT false diff --git a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch b/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch deleted file mode 100644 index 083238819b..0000000000 --- a/package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch +++ /dev/null @@ -1,70 +0,0 @@ -From a68074b5db2a1fb637853b808e5b263c2ce9cbdd Mon Sep 17 00:00:00 2001 -From: Daniel Stenberg -Date: Tue, 28 Jun 2022 08:37:22 +0200 -Subject: [PATCH] configure: check for the stdatomic.h header in configure - -... and only set HAVE_ATOMIC if that header exists since we use -typedefes set in it. - -Reported-by: Ryan Schmidt -Fixes #9059 -Closes #9060 - -Signed-off-by: Baruch Siach ---- -Upstream status: commit a68074b5db2a1fb637853b808e5b263c2ce9cbdd - - m4/curl-functions.m4 | 36 +++++++++++++++++++----------------- - 1 file changed, 19 insertions(+), 17 deletions(-) - -diff --git a/m4/curl-functions.m4 b/m4/curl-functions.m4 -index ec406f56aed8..f3e12a53a9fd 100644 ---- a/m4/curl-functions.m4 -+++ b/m4/curl-functions.m4 -@@ -6570,24 +6570,26 @@ AC_DEFUN([CURL_COVERAGE],[ - ]) - - dnl CURL_ATOMIC --dnl -------------------------------------------------- --dnl Check if _Atomic works -+dnl ------------------------------------------------------------- -+dnl Check if _Atomic works. But only check if stdatomic.h exists. - dnl - AC_DEFUN([CURL_ATOMIC],[ -- AC_MSG_CHECKING([if _Atomic is available]) -- AC_COMPILE_IFELSE([ -- AC_LANG_PROGRAM([[ -- $curl_includes_unistd -- ]],[[ -- _Atomic int i = 0; -- ]]) -- ],[ -- AC_MSG_RESULT([yes]) -- AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -- [Define to 1 if you have _Atomic support.]) -- tst_atomic="yes" -- ],[ -- AC_MSG_RESULT([no]) -- tst_atomic="no" -+ AC_CHECK_HEADERS(stdatomic.h, [ -+ AC_MSG_CHECKING([if _Atomic is available]) -+ AC_COMPILE_IFELSE([ -+ AC_LANG_PROGRAM([[ -+ $curl_includes_unistd -+ ]],[[ -+ _Atomic int i = 0; -+ ]]) -+ ],[ -+ AC_MSG_RESULT([yes]) -+ AC_DEFINE_UNQUOTED(HAVE_ATOMIC, 1, -+ [Define to 1 if you have _Atomic support.]) -+ tst_atomic="yes" -+ ],[ -+ AC_MSG_RESULT([no]) -+ tst_atomic="no" -+ ]) - ]) - ]) --- -2.35.1 - diff --git a/package/libcurl/libcurl.hash b/package/libcurl/libcurl.hash index 672591e470..c0e2378cac 100644 --- a/package/libcurl/libcurl.hash +++ b/package/libcurl/libcurl.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature # https://curl.se/download/curl-7.84.0.tar.xz.asc # signed with key 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2 -sha256 2d118b43f547bfe5bae806d8d47b4e596ea5b25a6c1f080aef49fbcd817c5db8 curl-7.84.0.tar.xz +sha256 2d61116e5f485581f6d59865377df4463f2e788677ac43222b496d4e49fb627b curl-7.86.0.tar.xz sha256 321b1a09ebc30410f2e837c072e5521cf7095b757193af4a7dae1086e36ed31a COPYING diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 9614ba5143..3c3ad082fc 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBCURL_VERSION = 7.84.0 +LIBCURL_VERSION = 7.86.0 LIBCURL_SOURCE = curl-$(LIBCURL_VERSION).tar.xz LIBCURL_SITE = https://curl.se/download LIBCURL_DEPENDENCIES = host-pkgconf \ @@ -15,8 +15,6 @@ LIBCURL_LICENSE_FILES = COPYING LIBCURL_CPE_ID_VENDOR = haxx LIBCURL_CPE_ID_PRODUCT = libcurl LIBCURL_INSTALL_STAGING = YES -# We are patching configure.ac -LIBCURL_AUTORECONF = YES # We disable NTLM support because it uses fork(), which doesn't work # on non-MMU platforms. Moreover, this authentication method is From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:25 +0200 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 In-Reply-To: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> References: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Message-ID: <20221028084525.2cb0b2a0@windsurf> On Thu, 27 Oct 2022 13:37:17 +0300 Baruch Siach via buildroot wrote: > Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses > cookies from an HTTP(S) server, it accepts cookies using control codes > (byte values below 32). When cookies that contain such control codes are > later sent back to an HTTP(S) server, it might make the server return a > 400 response. Effectively allowing a "sister site" to deny service to > siblings. > > Drop upstream patches and autoreconf. > > Cc: Matt Weber > Signed-off-by: Baruch Siach > --- > ...de-sched-h-if-available-to-fix-build.patch | 30 -------- > ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- > package/libcurl/libcurl.hash | 2 +- > package/libcurl/libcurl.mk | 4 +- > 4 files changed, 2 insertions(+), 104 deletions(-) > delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch > delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:25 +0200 Subject: [Buildroot] [PATCH] libcurl: security bump to version 7.86.0 In-Reply-To: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> References: <0021c4e4fdf0d97591acc6e0bde64c34b46997ad.1666867037.git.baruch@tkos.co.il> Message-ID: <20221028084525.2cb0b2a0@windsurf> On Thu, 27 Oct 2022 13:37:17 +0300 Baruch Siach via buildroot wrote: > Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses > cookies from an HTTP(S) server, it accepts cookies using control codes > (byte values below 32). When cookies that contain such control codes are > later sent back to an HTTP(S) server, it might make the server return a > 400 response. Effectively allowing a "sister site" to deny service to > siblings. > > Drop upstream patches and autoreconf. > > Cc: Matt Weber > Signed-off-by: Baruch Siach > --- > ...de-sched-h-if-available-to-fix-build.patch | 30 -------- > ...for-the-stdatomic.h-header-in-config.patch | 70 ------------------- > package/libcurl/libcurl.hash | 2 +- > package/libcurl/libcurl.mk | 4 +- > 4 files changed, 2 insertions(+), 104 deletions(-) > delete mode 100644 package/libcurl/0001-easy_lock-h-include-sched-h-if-available-to-fix-build.patch > delete mode 100644 package/libcurl/0002-configure-check-for-the-stdatomic.h-header-in-config.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:56 +0200 Subject: [Buildroot] [PATCH 1/1] package/tzdata: install leap-seconds.list into results In-Reply-To: <20221027203039.1004439-1-dave-git@centerclick.org> References: <20221027203039.1004439-1-dave-git@centerclick.org> Message-ID: <20221028084556.2118f0d8@windsurf> On Thu, 27 Oct 2022 16:30:39 -0400 David Johnson via buildroot wrote: > add leap-seconds.list to installed files so it can be used by other packages > > specifically, ntpd's ntp.conf can now include: > leapfile /usr/share/zoneinfo/leap-seconds.list > > Signed-off-by: David Johnson > --- > package/tzdata/tzdata.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:45:40 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:45:40 +0200 Subject: [Buildroot] [git commit] package/tzdata: install leap-seconds.list into results Message-ID: <20221028064624.42ACF8739C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce2e91bdc53a1daed8ec6845a0fdb1888de87408 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master add leap-seconds.list to installed files so it can be used by other packages specifically, ntpd's ntp.conf can now include: leapfile /usr/share/zoneinfo/leap-seconds.list Signed-off-by: David Johnson Signed-off-by: Thomas Petazzoni --- package/tzdata/tzdata.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/tzdata/tzdata.mk b/package/tzdata/tzdata.mk index 21ea94ecad..7a1a77fcd9 100644 --- a/package/tzdata/tzdata.mk +++ b/package/tzdata/tzdata.mk @@ -59,7 +59,7 @@ endef define HOST_TZDATA_INSTALL_CMDS $(INSTALL) -d -m 0755 $(HOST_DIR)/share/zoneinfo - cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/share/zoneinfo + cp -a $(@D)/_output/* $(@D)/*.tab $(@D)/leap-seconds.list $(HOST_DIR)/share/zoneinfo endef $(eval $(generic-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:46:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:46:15 +0200 Subject: [Buildroot] [git commit] boot/arm-trusted-firmware: don't enable SSP by default Message-ID: <20221028064624.4BBB88739D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f03ae604510bab7f7f7e516db96a6f880dd86688 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master SSP support requires support in ATF platform code. Not all platforms implement plat_get_stack_protector_canary() hook. The result is build failure: (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") originally introduces this issue. But then commit ccac9a5bbbd ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid the problem by effectively disabling SSP for all platforms. So only after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP support") the issue showed up. Make SSP an opt-in for platform that actually provide the plat_get_stack_protector_canary() hook. Cc: Sergey Matyukevich Cc: Dick Olsson Tested-by: Heiko Thiery Signed-off-by: Baruch Siach Signed-off-by: Thomas Petazzoni --- boot/arm-trusted-firmware/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 5070849d9b..a9b9bbcc5a 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -212,7 +212,6 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN config BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP bool "Build with SSP" - default y depends on BR2_TOOLCHAIN_HAS_SSP depends on !BR2_SSP_NONE help From thomas.petazzoni at bootlin.com Fri Oct 28 06:47:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:47:02 +0200 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default In-Reply-To: References: Message-ID: <20221028084702.3659ace8@windsurf> On Fri, 28 Oct 2022 08:36:27 +0300 Baruch Siach via buildroot wrote: > SSP support requires support in ATF platform code. Not all platforms > implement plat_get_stack_protector_canary() hook. The result is build > failure: > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > originally introduces this issue. But then commit ccac9a5bbbd > ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid > the problem by effectively disabling SSP for all platforms. So only > after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP > support") the issue showed up. > > Make SSP an opt-in for platform that actually provide the > plat_get_stack_protector_canary() hook. > > Cc: Sergey Matyukevich > Cc: Dick Olsson > Tested-by: Heiko Thiery > Signed-off-by: Baruch Siach > --- > boot/arm-trusted-firmware/Config.in | 1 - > 1 file changed, 1 deletion(-) We had a quick discussion with Peter Korsgaard on IRC a few days ago about this, and I do agree making this opt-in is the right solution, so I've applied. We'll see if other maintainers disagree :-) Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:47:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:47:02 +0200 Subject: [Buildroot] [PATCH] boot/arm-trusted-firmware: don't enable SSP by default In-Reply-To: References: Message-ID: <20221028084702.3659ace8@windsurf> On Fri, 28 Oct 2022 08:36:27 +0300 Baruch Siach via buildroot wrote: > SSP support requires support in ATF platform code. Not all platforms > implement plat_get_stack_protector_canary() hook. The result is build > failure: > > (.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary' > > Commit cf176128ec4 ("boot/arm-trusted-firmware: add SSP option") > originally introduces this issue. But then commit ccac9a5bbbd > ("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid > the problem by effectively disabling SSP for all platforms. So only > after commit 09acc7cbc91f5 ("boot/arm-trusted-firmware: fix SSP > support") the issue showed up. > > Make SSP an opt-in for platform that actually provide the > plat_get_stack_protector_canary() hook. > > Cc: Sergey Matyukevich > Cc: Dick Olsson > Tested-by: Heiko Thiery > Signed-off-by: Baruch Siach > --- > boot/arm-trusted-firmware/Config.in | 1 - > 1 file changed, 1 deletion(-) We had a quick discussion with Peter Korsgaard on IRC a few days ago about this, and I do agree making this opt-in is the right solution, so I've applied. We'll see if other maintainers disagree :-) Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:45 +0200 Subject: [Buildroot] [git commit] package/python-bottle: bump to version 0.12.23 Message-ID: <20221028065137.C8CED873B9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=aff25f871ae4b55affa87540937e618568ea6fe0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-bottle/python-bottle.hash | 4 ++-- package/python-bottle/python-bottle.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-bottle/python-bottle.hash b/package/python-bottle/python-bottle.hash index b1cc2aac20..58bc52e3cb 100644 --- a/package/python-bottle/python-bottle.hash +++ b/package/python-bottle/python-bottle.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/bottle/json -md5 4934ad7347eef30db669ccd05283a5e0 bottle-0.12.21.tar.gz -sha256 787c61b6cc02b9c229bf2663011fac53dd8fc197f7f8ad2eeede29d888d7887e bottle-0.12.21.tar.gz +md5 d07df795cd4baa596ee803e964ba77fd bottle-0.12.23.tar.gz +sha256 683de3aa399fb26e87b274dbcf70b1a651385d459131716387abdc3792e04167 bottle-0.12.23.tar.gz # Locally computed sha256 checksums sha256 d0e7211f1c3c1a1c56f39d18bcb07f27f480c8a9552617756dda3a335933b8a6 LICENSE diff --git a/package/python-bottle/python-bottle.mk b/package/python-bottle/python-bottle.mk index ffea59f38f..e1691972c3 100644 --- a/package/python-bottle/python-bottle.mk +++ b/package/python-bottle/python-bottle.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_BOTTLE_VERSION = 0.12.21 +PYTHON_BOTTLE_VERSION = 0.12.23 PYTHON_BOTTLE_SOURCE = bottle-$(PYTHON_BOTTLE_VERSION).tar.gz -PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/95/e3/5749d7657b6fb38d65afb3c0b345514a783de7a9feb4fab594fa0bacc2a0 +PYTHON_BOTTLE_SITE = https://files.pythonhosted.org/packages/7c/58/75f3765b0a3f86ef0b6e0b23d0503920936752ca6e0fc27efce7403b01bd PYTHON_BOTTLE_LICENSE = MIT PYTHON_BOTTLE_LICENSE_FILES = LICENSE PYTHON_BOTTLE_CPE_ID_VENDOR = bottlepy From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:46 +0200 Subject: [Buildroot] [git commit] package/python-greenlet: bump to version 1.1.3.post0 Message-ID: <20221028065137.D280D873BA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=671af464266326fd3d2dcbfb722bf57a96b692b6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-greenlet/python-greenlet.hash | 4 ++-- package/python-greenlet/python-greenlet.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-greenlet/python-greenlet.hash b/package/python-greenlet/python-greenlet.hash index c1870c886d..8e2a95b03e 100644 --- a/package/python-greenlet/python-greenlet.hash +++ b/package/python-greenlet/python-greenlet.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/greenlet/json -md5 f424fbd9afeed575dd2ba5f0ac66e30b greenlet-1.1.2.tar.gz -sha256 e30f5ea4ae2346e62cedde8794a56858a67b878dd79f7df76a0767e356b1744a greenlet-1.1.2.tar.gz +md5 b3e86eb9ab0908e6e3ef542e9b94d7e1 greenlet-1.1.3.post0.tar.gz +sha256 f5e09dc5c6e1796969fd4b775ea1417d70e49a5df29aaa8e5d10675d9e11872c greenlet-1.1.3.post0.tar.gz # Locally computed sha256 checksums sha256 769831d6e5dfaf2c20802faccff1fafb4c2025dd8f6253dfa47fcad59d4d0979 LICENSE sha256 e5ff3c23c110e494cd7d736c10fd96d462457bafeca310840db6527298c7d46b LICENSE.PSF diff --git a/package/python-greenlet/python-greenlet.mk b/package/python-greenlet/python-greenlet.mk index 72d2747970..b4a0e5af08 100644 --- a/package/python-greenlet/python-greenlet.mk +++ b/package/python-greenlet/python-greenlet.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_GREENLET_VERSION = 1.1.2 +PYTHON_GREENLET_VERSION = 1.1.3.post0 PYTHON_GREENLET_SOURCE = greenlet-$(PYTHON_GREENLET_VERSION).tar.gz -PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/0c/10/754e21b5bea89d0e73f99d60c83754df7cc64db74f47d98ab187669ce341 +PYTHON_GREENLET_SITE = https://files.pythonhosted.org/packages/ea/37/e54ce453b298e890f59dba3db32461579328a07d5b65e3eabf80f971c099 PYTHON_GREENLET_SETUP_TYPE = setuptools PYTHON_GREENLET_LICENSE = MIT, PSF-2.0 PYTHON_GREENLET_LICENSE_FILES = LICENSE LICENSE.PSF From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:48 +0200 Subject: [Buildroot] [git commit] package/python-pyzmq: bump to version 24.0.1 Message-ID: <20221028065137.E9923873BC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=488055eb58ce23e28e08b9c9a0ed72c5de9ce47e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Migrate to setuptools infrastructure. Add new host-python-packaging dependency. Refresh zmq version override patch. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- ...x-the-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++++------- package/python-pyzmq/python-pyzmq.hash | 4 +-- package/python-pyzmq/python-pyzmq.mk | 8 ++--- 3 files changed, 31 insertions(+), 18 deletions(-) diff --git a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch similarity index 55% rename from package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch rename to package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch index 315c8c8bb2..18553582f4 100644 --- a/package/python-pyzmq/0001-use-buildroot-zmq-version-instead-of-detect.patch +++ b/package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch @@ -1,4 +1,8 @@ -detect.py: fix the ZMQ version check to the ZMQ version of the buildroot +From 8eae1193457f72899f9cc2254ae1489026df9bb6 Mon Sep 17 00:00:00 2001 +From: Michael Rommel +Date: Sat, 10 Aug 2013 00:44:35 +0200 +Subject: [PATCH] detect.py: fix the ZMQ version check to the ZMQ version of + the buildroot The setup.py script tries to compile a test C program and runs it, to retrieve a version string for the installed ZMQ library, but if the cross @@ -17,38 +21,47 @@ Flandrin. Modified for version 18.0.2 by Asaf Kahlon +Modified for version 24.0.1 by James Hilliard + +Signed-off-by: Michael Rommel Signed-off-by: Lionel Flandrin Signed-off-by: Asaf Kahlon +Signed-off-by: James Hilliard --- buildutils/detect.py | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/buildutils/detect.py b/buildutils/detect.py -index d1380fe..4a91351 100644 +index 842e3b14..e2eca744 100644 --- a/buildutils/detect.py +++ b/buildutils/detect.py -@@ -120,13 +120,15 @@ def detect_zmq(basedir, compiler=None, **compiler_attrs): +@@ -120,18 +120,20 @@ def detect_zmq(basedir, compiler, **compiler_attrs): cc = get_compiler(compiler=compiler, **compiler_attrs) efile = test_compilation(cfile, compiler=cc, **compiler_attrs) - patch_lib_paths(efile, cc.library_dirs) + #patch_lib_paths(efile, cc.library_dirs) -- rc, so, se = get_output_error([efile]) + # add library dirs to %PATH% for windows + env = os.environ.copy() + if sys.platform.startswith("win"): + env["PATH"] = os.pathsep.join([env["PATH"]] + cc.library_dirs) + +- rc, so, se = get_output_error([efile], env=env) - if rc: -- msg = "Error running version detection script:\n%s\n%s" % (so,se) +- msg = f"Error running version detection script:\n{so}\n{se}" - logging.error(msg) -- raise IOError(msg) -+ #rc, so, se = get_output_error([efile]) -+ # if rc: -+ # msg = "Error running version detection script:\n%s\n%s" % (so,se) +- raise OSError(msg) ++ #rc, so, se = get_output_error([efile], env=env) ++ #if rc: ++ # msg = f"Error running version detection script:\n{so}\n{se}" + # logging.error(msg) -+ # raise IOError(msg) ++ # raise OSError(msg) + + so = "vers: ##ZEROMQ_VERSION##" - handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} + handlers = {'vers': lambda val: tuple(int(v) for v in val.split('.'))} -- -2.20.1 +2.34.1 diff --git a/package/python-pyzmq/python-pyzmq.hash b/package/python-pyzmq/python-pyzmq.hash index ecf6489249..efbc91d83c 100644 --- a/package/python-pyzmq/python-pyzmq.hash +++ b/package/python-pyzmq/python-pyzmq.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pyzmq/json -md5 200abc1a75bdcfff7adf61304f46f55e pyzmq-19.0.2.tar.gz -sha256 296540a065c8c21b26d63e3cea2d1d57902373b16e4256afe46422691903a438 pyzmq-19.0.2.tar.gz +md5 f10b7c3dee2c03557e2c5d00b73dfc7f pyzmq-24.0.1.tar.gz +sha256 216f5d7dbb67166759e59b0479bca82b8acf9bed6015b526b8eb10143fb08e77 pyzmq-24.0.1.tar.gz # Locally computed sha256 checksums sha256 aef3b80570351d44e29c22d080d4e9e106b34f3fdbc5cdf9636994474c72b1a2 COPYING.BSD sha256 44b23767df3c0fe27f88981f09bc7f50a1695cec4b24252fa5f55f03e76bcd6d COPYING.LESSER diff --git a/package/python-pyzmq/python-pyzmq.mk b/package/python-pyzmq/python-pyzmq.mk index d1f4314a1e..5792957eaf 100644 --- a/package/python-pyzmq/python-pyzmq.mk +++ b/package/python-pyzmq/python-pyzmq.mk @@ -4,14 +4,14 @@ # ################################################################################ -PYTHON_PYZMQ_VERSION = 19.0.2 +PYTHON_PYZMQ_VERSION = 24.0.1 PYTHON_PYZMQ_SOURCE = pyzmq-$(PYTHON_PYZMQ_VERSION).tar.gz -PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/05/77/7483975d84fe1fd24cc67881ba7810e0e7b3ee6c2a0e002a5d6703cca49b +PYTHON_PYZMQ_SITE = https://files.pythonhosted.org/packages/46/0d/b06cf99a64d4187632f4ac9ddf6be99cd35de06fe72d75140496a8e0eef5 PYTHON_PYZMQ_LICENSE = LGPL-3.0+, BSD-3-Clause, Apache-2.0 # Apache license only online: http://www.apache.org/licenses/LICENSE-2.0 PYTHON_PYZMQ_LICENSE_FILES = COPYING.LESSER COPYING.BSD -PYTHON_PYZMQ_DEPENDENCIES = zeromq -PYTHON_PYZMQ_SETUP_TYPE = distutils +PYTHON_PYZMQ_DEPENDENCIES = host-python-packaging zeromq +PYTHON_PYZMQ_SETUP_TYPE = setuptools PYTHON_PYZMQ_BUILD_OPTS = --zmq=$(STAGING_DIR)/usr # Due to issues with cross-compiling, hardcode to the zeromq in BR From thomas.petazzoni at bootlin.com Fri Oct 28 06:49:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:49:47 +0200 Subject: [Buildroot] [git commit] package/python-numpy: bump to version 1.23.4 Message-ID: <20221028065137.DE089873BB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32d8e23b977a5bba1f23e3821709c6aa9ff3bc55 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to date update: https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-numpy/python-numpy.hash | 8 ++++---- package/python-numpy/python-numpy.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-numpy/python-numpy.hash b/package/python-numpy/python-numpy.hash index c0dcc5d27f..2a2dec44da 100644 --- a/package/python-numpy/python-numpy.hash +++ b/package/python-numpy/python-numpy.hash @@ -1,8 +1,8 @@ -# Copied from https://github.com/numpy/numpy/releases/tag/v1.21.2 -sha256 76af194fbc117934ec5bbe2ff15177adbd05aeed23f18ee209ed88edcd777e05 numpy-1.21.2.tar.gz +# Copied from https://github.com/numpy/numpy/releases/tag/v1.23.4 +sha256 ed2cc92af0efad20198638c69bb0fc2870a58dabfba6eb722c933b48556c686c numpy-1.23.4.tar.gz # License files, locally calculated -sha256 bc1b0af15cdc9415ea26c5f1df352c226ac86425ec0fb9ab38d111018bf1c6f2 LICENSE.txt -sha256 2be6947e0432ecf7950ee8fe38681316749dd06d1de17c9ec4de6d2f55adb3a1 numpy/core/src/multiarray/dragon4.c +sha256 0f88787955e7131224f53a8c3f3e859dc502408e3a539a4dcf61fb7888b5b984 LICENSE.txt +sha256 c27d0a8026bdb8876562b720ab24d1688e3827a89f6083cd6e7e8caa9584aba3 numpy/core/src/multiarray/dragon4.c sha256 fbc539f47d0cf83bc61378080fb873d5c14630126cacbfe754035c3926daa5ec numpy/core/include/numpy/libdivide/LICENSE.txt sha256 a14cc25e10d40a3aa705b7de2fb764a6535d8ee9b2db4e1724900585457dfd55 numpy/linalg/lapack_lite/LICENSE.txt sha256 badf51c7e3e7de9c7630bd069780f5c197b846ef7660b342a1e58d5553592d8e tools/npy_tempita/license.txt diff --git a/package/python-numpy/python-numpy.mk b/package/python-numpy/python-numpy.mk index 417fe81f57..4f4848c4ba 100644 --- a/package/python-numpy/python-numpy.mk +++ b/package/python-numpy/python-numpy.mk @@ -4,7 +4,7 @@ # ################################################################################ -PYTHON_NUMPY_VERSION = 1.21.2 +PYTHON_NUMPY_VERSION = 1.23.4 PYTHON_NUMPY_SOURCE = numpy-$(PYTHON_NUMPY_VERSION).tar.gz PYTHON_NUMPY_SITE = https://github.com/numpy/numpy/releases/download/v$(PYTHON_NUMPY_VERSION) PYTHON_NUMPY_LICENSE = BSD-3-Clause, MIT, Zlib From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:50 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-bottle: bump to version 0.12.23 In-Reply-To: <20221025223639.550839-1-james.hilliard1@gmail.com> References: <20221025223639.550839-1-james.hilliard1@gmail.com> Message-ID: <20221028085150.7aa26fdb@windsurf> On Tue, 25 Oct 2022 16:36:39 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-bottle/python-bottle.hash | 4 ++-- > package/python-bottle/python-bottle.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:54 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-greenlet: bump to version 1.1.3.post0 In-Reply-To: <20221026014052.587418-1-james.hilliard1@gmail.com> References: <20221026014052.587418-1-james.hilliard1@gmail.com> Message-ID: <20221028085154.7f29e0db@windsurf> On Tue, 25 Oct 2022 19:40:52 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-greenlet/python-greenlet.hash | 4 ++-- > package/python-greenlet/python-greenlet.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:51:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:51:58 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-numpy: bump to version 1.23.4 In-Reply-To: <20221026023505.616591-1-james.hilliard1@gmail.com> References: <20221026023505.616591-1-james.hilliard1@gmail.com> Message-ID: <20221028085158.483b0c09@windsurf> On Tue, 25 Oct 2022 20:35:05 -0600 James Hilliard wrote: > License hash changed due to date update: > https://github.com/numpy/numpy/commit/4fc42f99b7f96b1000c777a478f58e2744bb3656 > > Signed-off-by: James Hilliard > --- > package/python-numpy/python-numpy.hash | 8 ++++---- > package/python-numpy/python-numpy.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-pyzmq: bump to version 24.0.1 In-Reply-To: <20221026031157.658391-1-james.hilliard1@gmail.com> References: <20221026031157.658391-1-james.hilliard1@gmail.com> Message-ID: <20221028085207.144e54b4@windsurf> On Tue, 25 Oct 2022 21:11:57 -0600 James Hilliard wrote: > Migrate to setuptools infrastructure. > > Add new host-python-packaging dependency. > > Refresh zmq version override patch. > > Signed-off-by: James Hilliard > --- > ...-ZMQ-version-check-to-the-ZMQ-versi.patch} | 37 +++++++++++++------ > package/python-pyzmq/python-pyzmq.hash | 4 +- > package/python-pyzmq/python-pyzmq.mk | 8 ++-- > 3 files changed, 31 insertions(+), 18 deletions(-) > rename package/python-pyzmq/{0001-use-buildroot-zmq-version-instead-of-detect.patch => 0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch} (55%) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:47 +0200 Subject: [Buildroot] [PATCH] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 In-Reply-To: <20221023114908.505511-1-francois.perrad@gadz.org> References: <20221023114908.505511-1-francois.perrad@gadz.org> Message-ID: <20221028085247.09d8c862@windsurf> On Sun, 23 Oct 2022 13:49:08 +0200 Francois Perrad wrote: > Signed-off-by: Francois Perrad > --- > package/luajit/0001-no-bin-symlink.patch | 4 ++-- > package/luajit/0002-install-inc.patch | 6 +++--- > package/luajit/luajit.hash | 2 +- > package/luajit/luajit.mk | 2 +- > 4 files changed, 7 insertions(+), 7 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:52:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:52:36 +0200 Subject: [Buildroot] [git commit] package/luajit: bump to 6c4826f12c4d33b8b978004bc681eb1eef2be977 Message-ID: <20221028065344.B14C2873C2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8ab39ac65eab0e22e82b9b56a198a9abc83b5a9f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/luajit/0001-no-bin-symlink.patch | 4 ++-- package/luajit/0002-install-inc.patch | 6 +++--- package/luajit/luajit.hash | 2 +- package/luajit/luajit.mk | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/package/luajit/0001-no-bin-symlink.patch b/package/luajit/0001-no-bin-symlink.patch index d32ec5ad60..dc36fa58d6 100644 --- a/package/luajit/0001-no-bin-symlink.patch +++ b/package/luajit/0001-no-bin-symlink.patch @@ -6,7 +6,7 @@ Index: b/Makefile =================================================================== --- a/Makefile +++ b/Makefile -@@ -44,8 +44,7 @@ +@@ -45,8 +45,7 @@ INSTALL_MAN= $(INSTALL_SHARE)/man/man1 INSTALL_PKGCONFIG= $(INSTALL_LIB)/pkgconfig @@ -16,7 +16,7 @@ Index: b/Makefile INSTALL_ANAME= libluajit-$(ABIVER).a INSTALL_SOSHORT1= libluajit-$(ABIVER).so INSTALL_SOSHORT2= libluajit-$(ABIVER).so.$(MAJVER) -@@ -60,7 +59,6 @@ +@@ -61,7 +60,6 @@ INSTALL_SHORT1= $(INSTALL_LIB)/$(INSTALL_SOSHORT1) INSTALL_SHORT2= $(INSTALL_LIB)/$(INSTALL_SOSHORT2) INSTALL_T= $(INSTALL_BIN)/$(INSTALL_TNAME) diff --git a/package/luajit/0002-install-inc.patch b/package/luajit/0002-install-inc.patch index 5f6547fc3f..8de777dce2 100644 --- a/package/luajit/0002-install-inc.patch +++ b/package/luajit/0002-install-inc.patch @@ -10,8 +10,8 @@ Index: b/Makefile INSTALL_BIN= $(DPREFIX)/bin INSTALL_LIB= $(DPREFIX)/$(MULTILIB) INSTALL_SHARE= $(DPREFIX)/share --INSTALL_INC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) -+INSTALL_INC= $(DPREFIX)/include +-INSTALL_DEFINC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER) ++INSTALL_DEFINC= $(DPREFIX)/include + INSTALL_INC= $(INSTALL_DEFINC) INSTALL_LJLIBD= $(INSTALL_SHARE)/luajit-$(VERSION) - INSTALL_JITLIB= $(INSTALL_LJLIBD)/jit diff --git a/package/luajit/luajit.hash b/package/luajit/luajit.hash index 648d6eb181..d00cea4ee0 100644 --- a/package/luajit/luajit.hash +++ b/package/luajit/luajit.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 e0389c7669f8e455383d8f0c9d9354d44cdd1885bbf8fd0d4bcdb8fc6f794063 luajit-5677985dc1f19cf0a67112f4365c7fb79237fa16.tar.gz +sha256 19a911fdd77af69e48fa50749606a9009696f543cc88e898b4480d8d3c8828f5 luajit-6c4826f12c4d33b8b978004bc681eb1eef2be977.tar.gz # Locally calculated sha256 52fc5b15ac968ed81aabb4c1e23ab3bce50f57a5764e9cdca86b463a11072921 COPYRIGHT diff --git a/package/luajit/luajit.mk b/package/luajit/luajit.mk index 2c1e3216e1..c79f18bf62 100644 --- a/package/luajit/luajit.mk +++ b/package/luajit/luajit.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUAJIT_VERSION = 5677985dc1f19cf0a67112f4365c7fb79237fa16 +LUAJIT_VERSION = 6c4826f12c4d33b8b978004bc681eb1eef2be977 LUAJIT_SITE = $(call github,LuaJIT,LuaJIT,$(LUAJIT_VERSION)) LUAJIT_LICENSE = MIT LUAJIT_LICENSE_FILES = COPYRIGHT From thomas.petazzoni at bootlin.com Fri Oct 28 06:54:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:54:17 +0200 Subject: [Buildroot] [PATCH 1/2] package/lz4: fix LZ4_CPE_ID_VENDOR In-Reply-To: <20221023091009.18544-1-fontaine.fabrice@gmail.com> References: <20221023091009.18544-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085417.4c939fa6@windsurf> On Sun, 23 Oct 2022 11:10:08 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:yann_collet:lz4, which was added by commit > 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE > identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 > > cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 > > While at it, also drop the note added by commit > 45db4bb08e3e550db483d8745fe8aaede2fa7e98 > > Signed-off-by: Fabrice Fontaine > --- > package/lz4/lz4.mk | 8 +------- > 1 file changed, 1 insertion(+), 7 deletions(-) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:53:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:53:13 +0200 Subject: [Buildroot] [git commit] package/lz4: fix LZ4_CPE_ID_VENDOR Message-ID: <20221028065507.5E7C6873D4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ae29bb28808dbafd39d39e850820b3f063329f66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:yann_collet:lz4, which was added by commit 63332c33aa0771532807fd2684d4eee4eb952435, was never a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ayann_collet%3Alz4 cpe:2.3:a:lz4_project:lz4 is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alz4_project%3Alz4 While at it, also drop the note added by commit 45db4bb08e3e550db483d8745fe8aaede2fa7e98 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lz4/lz4.mk | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 9b9b6198c3..541a03473a 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -9,13 +9,7 @@ LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING -LZ4_CPE_ID_VENDOR = yann_collet - -# CVE-2014-4715 is misclassified (by our CVE tracker) as affecting version -# 1.9.2, while in fact this issue has been fixed since lz4-r130: -# https://github.com/lz4/lz4/commit/140e6e72ddb6fc5f7cd28ce0c8ec3812ef4a9c08 -# See https://github.com/lz4/lz4/issues/818 -LZ4_IGNORE_CVES += CVE-2014-4715 +LZ4_CPE_ID_VENDOR = lz4_project # 0001-Fix-potential-memory-corruption-with-negative-memmov.patch LZ4_IGNORE_CVES += CVE-2021-3520 From thomas.petazzoni at bootlin.com Fri Oct 28 06:53:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:53:52 +0200 Subject: [Buildroot] [git commit] package/lz4: bump to version 1.9.4 Message-ID: <20221028065507.68E67873D5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1f54af8c4f814bfc0993756b82575ad581ce5318 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master LZ4 v1.9.4 is a maintenance release, featuring a substantial amount (~350 commits) of minor fixes and improvements, making it a recommended upgrade. The stable portion of liblz4 API is unmodified, making this release a drop-in replacement for existing features. - Drop patch (already in version) - Update hash of lib/LICENSE (update in year with https://github.com/lz4/lz4/commit/87a80acbe7872b9da7d56f7005ffd1b715e87c93) https://github.com/lz4/lz4/releases/tag/v1.9.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...al-memory-corruption-with-negative-memmov.patch | 26 ---------------------- package/lz4/lz4.hash | 4 ++-- package/lz4/lz4.mk | 5 +---- 3 files changed, 3 insertions(+), 32 deletions(-) diff --git a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch b/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch deleted file mode 100644 index 57e4e38f84..0000000000 --- a/package/lz4/0001-Fix-potential-memory-corruption-with-negative-memmov.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8301a21773ef61656225e264f4f06ae14462bca7 Mon Sep 17 00:00:00 2001 -From: Jasper Lievisse Adriaanse -Date: Fri, 26 Feb 2021 15:21:20 +0100 -Subject: [PATCH] Fix potential memory corruption with negative memmove() size - -Signed-off-by: Peter Korsgaard ---- - lib/lz4.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/lib/lz4.c b/lib/lz4.c -index 5f524d0..c2f504e 100644 ---- a/lib/lz4.c -+++ b/lib/lz4.c -@@ -1749,7 +1749,7 @@ LZ4_decompress_generic( - const size_t dictSize /* note : = 0 if noDict */ - ) - { -- if (src == NULL) { return -1; } -+ if ((src == NULL) || (outputSize < 0)) { return -1; } - - { const BYTE* ip = (const BYTE*) src; - const BYTE* const iend = ip + srcSize; --- -2.20.1 - diff --git a/package/lz4/lz4.hash b/package/lz4/lz4.hash index 0b03089ecd..04bd118cfe 100644 --- a/package/lz4/lz4.hash +++ b/package/lz4/lz4.hash @@ -1,4 +1,4 @@ # sha256 locally computed -sha256 030644df4611007ff7dc962d981f390361e6c97a34e5cbc393ddfbe019ffe2c1 lz4-1.9.3.tar.gz -sha256 d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71 lib/LICENSE +sha256 0b0e3aa07c8c063ddf40b082bdf7e37a1562bda40a0ff5272957f3e987e0e54b lz4-1.9.4.tar.gz +sha256 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c lib/LICENSE sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 programs/COPYING diff --git a/package/lz4/lz4.mk b/package/lz4/lz4.mk index 541a03473a..5da1ae2703 100644 --- a/package/lz4/lz4.mk +++ b/package/lz4/lz4.mk @@ -4,16 +4,13 @@ # ################################################################################ -LZ4_VERSION = 1.9.3 +LZ4_VERSION = 1.9.4 LZ4_SITE = $(call github,lz4,lz4,v$(LZ4_VERSION)) LZ4_INSTALL_STAGING = YES LZ4_LICENSE = BSD-2-Clause (library), GPL-2.0+ (programs) LZ4_LICENSE_FILES = lib/LICENSE programs/COPYING LZ4_CPE_ID_VENDOR = lz4_project -# 0001-Fix-potential-memory-corruption-with-negative-memmov.patch -LZ4_IGNORE_CVES += CVE-2021-3520 - ifeq ($(BR2_STATIC_LIBS),y) LZ4_MAKE_OPTS += BUILD_SHARED=no else ifeq ($(BR2_SHARED_LIBS),y) From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/lv2: bump to version 1.18.10 In-Reply-To: <20221022220808.191363-1-fontaine.fabrice@gmail.com> References: <20221022220808.191363-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085545.4cb62b57@windsurf> On Sun, 23 Oct 2022 00:08:07 +0200 Fabrice Fontaine wrote: > - Update hash of COPYING (standard ISC text used since > https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) > - meson must be used since > https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab > > https://github.com/lv2/lv2/blob/v1.18.10/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/lv2/lv2.hash | 6 +++--- > package/lv2/lv2.mk | 13 ++++++------- > 2 files changed, 9 insertions(+), 10 deletions(-) Both applied, thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:15 +0200 Subject: [Buildroot] [git commit] package/sratom: bump to version 0.6.14 Message-ID: <20221028065611.AA11D873E8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a30e31a05e21461e73175c814ba858edb23a363e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update hash of COPYING (standard ISC licence used since https://github.com/lv2/sratom/commit/145ed2fe9756f707d9fd5f03ada5327d04e1b972) - meson must be used since https://github.com/lv2/sratom/commit/75e647def0f67647ec7ba1405e26d809a87c62fc https://github.com/lv2/sratom/blob/v0.6.14/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/sratom/sratom.hash | 6 +++--- package/sratom/sratom.mk | 12 ++++-------- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/package/sratom/sratom.hash b/package/sratom/sratom.hash index 64d460b2ea..3b8fa65300 100644 --- a/package/sratom/sratom.hash +++ b/package/sratom/sratom.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://download.drobilla.net/sratom-0.6.8.tar.bz2.asc -sha256 3acb32b1adc5a2b7facdade2e0818bcd6c71f23f84a1ebc17815bb7a0d2d02df sratom-0.6.8.tar.bz2 -sha256 3fc429d6b944fa20306357196a28bb4dd7c25e2d67edebec771f44de5bd7f9e8 COPYING +# https://download.drobilla.net/sratom-0.6.14.tar.xz.sig +sha256 9982faf40db83aedd9b3850e499fecd6852b8b4ba6dede514013655cffaca1e6 sratom-0.6.14.tar.xz +sha256 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597 COPYING diff --git a/package/sratom/sratom.mk b/package/sratom/sratom.mk index e1e0f4e033..25e7a091b3 100644 --- a/package/sratom/sratom.mk +++ b/package/sratom/sratom.mk @@ -4,18 +4,14 @@ # ################################################################################ -SRATOM_VERSION = 0.6.8 +SRATOM_VERSION = 0.6.14 SRATOM_SITE = https://download.drobilla.net -SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.bz2 +SRATOM_SOURCE = sratom-$(SRATOM_VERSION).tar.xz SRATOM_LICENSE = ISC SRATOM_LICENSE_FILES = COPYING SRATOM_DEPENDENCIES = host-pkgconf lv2 serd sord SRATOM_INSTALL_STAGING = YES -SRATOM_CONF_OPTS += --no-coverage +SRATOM_CONF_OPTS += -Ddocs=disabled -Dtests=disabled -ifeq ($(BR2_STATIC_LIBS),y) -SRATOM_CONF_OPTS += --static --no-shared -endif - -$(eval $(waf-package)) +$(eval $(meson-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:03 +0200 Subject: [Buildroot] [git commit] package/libffi: bump to version 3.4.4 Message-ID: <20221028065611.B3EDE873E9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=123fa2d801ab0b9a5dd025a083c6264271d79aaf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master 3.4.4 Oct-23-2022 Important aarch64 fixes, including support for linux builds with Link Time Optimization (-flto). Fix x86 stdcall stack alignment. Fix x86 Windows msvc assembler compatibility. Fix moxie and or1k small structure args. https://github.com/libffi/libffi/releases/tag/v3.4.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libffi/libffi.hash | 2 +- package/libffi/libffi.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libffi/libffi.hash b/package/libffi/libffi.hash index 689b5da4f1..8d2349ec21 100644 --- a/package/libffi/libffi.hash +++ b/package/libffi/libffi.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 4416dd92b6ae8fcb5b10421e711c4d3cb31203d77521a77d85d0102311e6c3b8 libffi-3.4.3.tar.gz +sha256 d66c56ad259a82cf2a9dfc408b32bf5da52371500b84745f7fb8b645712df676 libffi-3.4.4.tar.gz # License files, locally calculated sha256 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388 LICENSE diff --git a/package/libffi/libffi.mk b/package/libffi/libffi.mk index ecfa120c7a..8f6844113c 100644 --- a/package/libffi/libffi.mk +++ b/package/libffi/libffi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBFFI_VERSION = 3.4.3 +LIBFFI_VERSION = 3.4.4 LIBFFI_SITE = \ https://github.com/libffi/libffi/releases/download/v$(LIBFFI_VERSION) LIBFFI_LICENSE = MIT From thomas.petazzoni at bootlin.com Fri Oct 28 06:55:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:55:04 +0200 Subject: [Buildroot] [git commit] package/lv2: bump to version 1.18.10 Message-ID: <20221028065611.9FDA7873E7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5fe9ae335f8cfa5140ef5309ac931cbd3e4cf3fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update hash of COPYING (standard ISC text used since https://github.com/lv2/lv2/commit/0030682770cdab7069c8c96e2fdf0e99f9b42b65) - meson must be used since https://github.com/lv2/lv2/commit/d4a970f6962dda28133290194832b726b566ddab https://github.com/lv2/lv2/blob/v1.18.10/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lv2/lv2.hash | 6 +++--- package/lv2/lv2.mk | 13 ++++++------- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/package/lv2/lv2.hash b/package/lv2/lv2.hash index ed21620bee..0814958887 100644 --- a/package/lv2/lv2.hash +++ b/package/lv2/lv2.hash @@ -1,4 +1,4 @@ # Locally calculated after checking signature -# https://lv2plug.in/spec/lv2-1.18.2.tar.bz2.asc -sha256 4e891fbc744c05855beb5dfa82e822b14917dd66e98f82b8230dbd1c7ab2e05e lv2-1.18.2.tar.bz2 -sha256 0b0b07d852e3ce7fa04986e141f73001bd7f260683968f0a19e02dbcc4131aa6 COPYING +# https://lv2plug.in/spec/lv2-1.18.10.tar.xz.sig +sha256 78c51bcf21b54e58bb6329accbb4dae03b2ed79b520f9a01e734bd9de530953f lv2-1.18.10.tar.xz +sha256 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841 COPYING diff --git a/package/lv2/lv2.mk b/package/lv2/lv2.mk index 13ffaa34b0..2dde9b907c 100644 --- a/package/lv2/lv2.mk +++ b/package/lv2/lv2.mk @@ -4,18 +4,17 @@ # ################################################################################ -LV2_VERSION = 1.18.2 +LV2_VERSION = 1.18.10 LV2_SITE = https://lv2plug.in/spec -LV2_SOURCE = lv2-$(LV2_VERSION).tar.bz2 +LV2_SOURCE = lv2-$(LV2_VERSION).tar.xz LV2_LICENSE = ISC LV2_LICENSE_FILES = COPYING LV2_DEPENDENCIES = host-pkgconf LV2_INSTALL_STAGING = YES LV2_CONF_OPTS += \ - --no-coverage \ - --no-check-links \ - --copy-headers + -Ddocs=disabled \ + -Dtests=disabled ifeq ($(BR2_PACKAGE_CAIRO),y) LV2_DEPENDENCIES += cairo @@ -30,7 +29,7 @@ LV2_DEPENDENCIES += libgtk2 endif ifeq ($(BR2_STATIC_LIBS),y) -LV2_CONF_OPTS += --no-plugins +LV2_CONF_OPTS += -Dplugins=disabled endif -$(eval $(waf-package)) +$(eval $(meson-package)) From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:19 +0200 Subject: [Buildroot] [PATCH 1/1] package/libffi: bump to version 3.4.4 In-Reply-To: <20221025221445.352620-1-fontaine.fabrice@gmail.com> References: <20221025221445.352620-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085619.2acac723@windsurf> On Wed, 26 Oct 2022 00:14:45 +0200 Fabrice Fontaine wrote: > 3.4.4 Oct-23-2022 > Important aarch64 fixes, including support for linux builds > with Link Time Optimization (-flto). > Fix x86 stdcall stack alignment. > Fix x86 Windows msvc assembler compatibility. > Fix moxie and or1k small structure args. > > https://github.com/libffi/libffi/releases/tag/v3.4.4 > > Signed-off-by: Fabrice Fontaine > --- > package/libffi/libffi.hash | 2 +- > package/libffi/libffi.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:57:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:57:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/empty: bump to version 0.6.22b In-Reply-To: <20221021220800.10420-1-fontaine.fabrice@gmail.com> References: <20221021220800.10420-1-fontaine.fabrice@gmail.com> Message-ID: <20221028085711.03c25f54@windsurf> On Sat, 22 Oct 2022 00:08:00 +0200 Fabrice Fontaine wrote: > - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) > - Update hash of COPYRIGHT (update in year with > https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) > > 10.08.2022 0.6.22b > -------------------------------------------------------------------------------- > * Man pages directory parameterization > * Tarball clenup, repacking Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:56:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:56:57 +0200 Subject: [Buildroot] [git commit] package/empty: bump to version 0.6.22b Message-ID: <20221028065808.DFC16873F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5faa07794965a53c8122d252dd41ad4b6903eea branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop EMPTY_STRIP_COMPONENTS (not needed anymore) - Update hash of COPYRIGHT (update in year with https://sourceforge.net/p/empty/code/ci/c308663530aba4f808b76ee6b4a4b144be9f8a84) 10.08.2022 0.6.22b -------------------------------------------------------------------------------- * Man pages directory parameterization * Tarball clenup, repacking https://sourceforge.net/p/empty/code/ci/master/tree/CHANGELOG Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/empty/empty.hash | 4 ++-- package/empty/empty.mk | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/empty/empty.hash b/package/empty/empty.hash index c5fbc2b4ac..cc74254a7a 100644 --- a/package/empty/empty.hash +++ b/package/empty/empty.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 2fccd0faa1b3deaec1add679cbde3f34250e45872ad5df463badd4bb4edeb797 empty-0.6.21b.tgz -sha256 f01dbe3c624084900b9df1393d9062518b2bc0487acd6a3300ebd6e71352d112 COPYRIGHT +sha256 f581d560e1fa857f5304586e3c2107b5838bcf11dedcccec4a7191fa9e261b69 empty-0.6.22b.tgz +sha256 db6b65f5eaf782a92715887ac107f3477d64016301a66194a92312b13ff89be1 COPYRIGHT diff --git a/package/empty/empty.mk b/package/empty/empty.mk index a9b8080a8e..91d9476445 100644 --- a/package/empty/empty.mk +++ b/package/empty/empty.mk @@ -4,12 +4,11 @@ # ################################################################################ -EMPTY_VERSION = 0.6.21b +EMPTY_VERSION = 0.6.22b EMPTY_SOURCE = empty-$(EMPTY_VERSION).tgz EMPTY_SITE = http://downloads.sourceforge.net/project/empty/empty/empty-$(EMPTY_VERSION) EMPTY_LICENSE = BSD-3-Clause EMPTY_LICENSE_FILES = COPYRIGHT -EMPTY_STRIP_COMPONENTS = 0 define EMPTY_BUILD_CMDS $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all From thomas.petazzoni at bootlin.com Fri Oct 28 06:58:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:58:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/python-aiojobs: bump to version 1.1.0 In-Reply-To: <20221021190109.3411635-1-james.hilliard1@gmail.com> References: <20221021190109.3411635-1-james.hilliard1@gmail.com> Message-ID: <20221028085848.20438aa4@windsurf> On Fri, 21 Oct 2022 13:01:09 -0600 James Hilliard wrote: > Add new python-async-timeout runtime dependency. > > License hash changed due to removal of full license text: > https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 > > Signed-off-by: James Hilliard > --- > package/python-aiojobs/Config.in | 1 + > package/python-aiojobs/python-aiojobs.hash | 6 +++--- > package/python-aiojobs/python-aiojobs.mk | 6 +++--- > 3 files changed, 7 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Fri Oct 28 06:58:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Fri, 28 Oct 2022 08:58:33 +0200 Subject: [Buildroot] [git commit] package/python-aiojobs: bump to version 1.1.0 Message-ID: <20221028065946.BB62E873F9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=014ec19dfe9361ea2b7bc557b73f18719d76dc17 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add new python-async-timeout runtime dependency. License hash changed due to removal of full license text: https://github.com/aio-libs/aiojobs/commit/db3e047550d9fb102742d02f8b7bba63ee3ca040 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiojobs/Config.in | 1 + package/python-aiojobs/python-aiojobs.hash | 6 +++--- package/python-aiojobs/python-aiojobs.mk | 6 +++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/package/python-aiojobs/Config.in b/package/python-aiojobs/Config.in index 0cdd1c106f..2dc4f3f955 100644 --- a/package/python-aiojobs/Config.in +++ b/package/python-aiojobs/Config.in @@ -1,5 +1,6 @@ config BR2_PACKAGE_PYTHON_AIOJOBS bool "python-aiojobs" + select BR2_PACKAGE_PYTHON_ASYNC_TIMEOUT # runtime help Jobs scheduler for managing background task (asyncio). diff --git a/package/python-aiojobs/python-aiojobs.hash b/package/python-aiojobs/python-aiojobs.hash index 44bf20c428..511953713b 100644 --- a/package/python-aiojobs/python-aiojobs.hash +++ b/package/python-aiojobs/python-aiojobs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiojobs/json -md5 d537fefca047067255758d7cb9e39db8 aiojobs-0.3.0.tar.gz -sha256 f6631d42dc4308f7d883abbd70d4e976f3fcc35a3ba1e8eae5d4af4940a1e0c3 aiojobs-0.3.0.tar.gz +md5 18a5b38cc13b2d59a91fdfec64588b4c aiojobs-1.1.0.tar.gz +sha256 f0c43dfc4de359052a67df309b593732c32028deef1bb787c7a363da29accde3 aiojobs-1.1.0.tar.gz # Locally computed sha256 checksums -sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE +sha256 1803dc89455114eefad3b827543343edc2452432fdac29b5edc66c8b66d4cbf3 LICENSE diff --git a/package/python-aiojobs/python-aiojobs.mk b/package/python-aiojobs/python-aiojobs.mk index 5d9a19eb8c..075d807d8b 100644 --- a/package/python-aiojobs/python-aiojobs.mk +++ b/package/python-aiojobs/python-aiojobs.mk @@ -4,10 +4,10 @@ # ################################################################################ -PYTHON_AIOJOBS_VERSION = 0.3.0 +PYTHON_AIOJOBS_VERSION = 1.1.0 PYTHON_AIOJOBS_SOURCE = aiojobs-$(PYTHON_AIOJOBS_VERSION).tar.gz -PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/da/09/76d9c0d66d2fd1333835f110cd85f7456de7cf3f60425e3b283fba562731 -PYTHON_AIOJOBS_SETUP_TYPE = distutils +PYTHON_AIOJOBS_SITE = https://files.pythonhosted.org/packages/99/75/b6d3678d804fffda81ebbac6214c35a4417d5ddbd70ffe7958ad951e64d2 +PYTHON_AIOJOBS_SETUP_TYPE = setuptools PYTHON_AIOJOBS_LICENSE = Apache-2.0 PYTHON_AIOJOBS_LICENSE_FILES = LICENSE From fontaine.fabrice at gmail.com Fri Oct 28 16:48:00 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 18:48:00 +0200 Subject: [Buildroot] [PATCH 1/1] package/lz4: fix static build Message-ID: <20221028164800.16655-1-fontaine.fabrice@gmail.com> Fix the following static build failure raised since bump to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compiling dynamic library 1.9.4 /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': (.text+0x1c): undefined reference to `main' Fixes: - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 Signed-off-by: Fabrice Fontaine --- .../0001-build-Support-BUILD_SHARED-no.patch | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 package/lz4/0001-build-Support-BUILD_SHARED-no.patch diff --git a/package/lz4/0001-build-Support-BUILD_SHARED-no.patch b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch new file mode 100644 index 0000000000..d2d8639a3b --- /dev/null +++ b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch @@ -0,0 +1,42 @@ +From 5ccbd38277989ae6a728171d59ae03bad6f2f4d5 Mon Sep 17 00:00:00 2001 +From: Fotis Xenakis +Date: Tue, 13 Sep 2022 20:09:36 +0300 +Subject: [PATCH] build: Support BUILD_SHARED=no + +Since e585a438c714652e866a59371b287f52aa4d2dc3, the BUILD_SHARED +Makefile variable only takes effect for the install target (i.e. the +shared libraries always built). This restores the original behaviour. + +[Retrieved from: +https://github.com/lz4/lz4/commit/5ccbd38277989ae6a728171d59ae03bad6f2f4d5] +Signed-off-by: Fabrice Fontaine +--- + lib/Makefile | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/lib/Makefile b/lib/Makefile +index 06503cb2a..ee262c0df 100644 +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -112,17 +112,21 @@ liblz4-dll.o: liblz4-dll.rc + $(WINDRES) -i liblz4-dll.rc -o liblz4-dll.o + + $(LIBLZ4): $(SRCFILES) liblz4-dll.o ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -DLZ4_DLL_EXPORT=1 -shared $^ -o dll/$@.dll -Wl,--out-implib,dll/$(LIBLZ4_EXP) ++endif + + else # not windows + + $(LIBLZ4): $(SRCFILES) ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -shared $^ -fPIC -fvisibility=hidden $(SONAME_FLAGS) -o $@ + @echo creating versioned links + $(LN_SF) $@ liblz4.$(SHARED_EXT_MAJOR) + $(LN_SF) $@ liblz4.$(SHARED_EXT) ++endif + + endif + -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 16:57:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 18:57:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/atftp: bump to version 0.8.0 Message-ID: <20221028165748.47166-1-fontaine.fabrice@gmail.com> - No configure script in official tarball - pcre has been replaced by pcre2 since https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae https://github.com/madmartin/atftp/blob/v0.8.0/Changelog Signed-off-by: Fabrice Fontaine --- package/atftp/atftp.hash | 2 +- package/atftp/atftp.mk | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/atftp/atftp.hash b/package/atftp/atftp.hash index 6b0d9a5879..b335456f33 100644 --- a/package/atftp/atftp.hash +++ b/package/atftp/atftp.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 93c87a4fb18218414e008e01c995dadd231ba4c752d0f894b34416d1e6d3038a atftp-0.7.5.tar.gz +sha256 df2aa089c7670f9eab40e5598e5d2cb6a582dc5182926ea50b4d690e4e37f316 atftp-0.8.0.tar.gz sha256 86dc744860e6dfacfeba2f33fea908db03fe67c7e37a878285b7aae8e4596735 LICENSE diff --git a/package/atftp/atftp.mk b/package/atftp/atftp.mk index 70ef4c0fae..288501bc11 100644 --- a/package/atftp/atftp.mk +++ b/package/atftp/atftp.mk @@ -4,12 +4,14 @@ # ################################################################################ -ATFTP_VERSION = 0.7.5 +ATFTP_VERSION = 0.8.0 ATFTP_SITE = http://sourceforge.net/projects/atftp/files ATFTP_LICENSE = GPL-2.0+ ATFTP_LICENSE_FILES = LICENSE ATFTP_CPE_ID_VENDOR = atftp_project ATFTP_SELINUX_MODULES = tftp +# No configure in tarball +ATFTP_AUTORECONF = YES ATFTP_CONF_OPTS = --disable-libwrap --disable-mtftp # For static we need to explicitly link against libpthread ATFTP_LIBS = -lpthread @@ -27,8 +29,8 @@ else ATFTP_CONF_OPTS += --disable-libreadline endif -ifeq ($(BR2_PACKAGE_PCRE),y) -ATFTP_DEPENDENCIES += pcre +ifeq ($(BR2_PACKAGE_PCRE2),y) +ATFTP_DEPENDENCIES += pcre2 ATFTP_CONF_OPTS += --enable-libpcre else ATFTP_CONF_OPTS += --disable-libpcre -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 18:24:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 20:24:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/conntrack-tools: bump to version 1.4.7 Message-ID: <20221028182401.137273-1-fontaine.fabrice@gmail.com> https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt Signed-off-by: Fabrice Fontaine --- package/conntrack-tools/conntrack-tools.hash | 2 +- package/conntrack-tools/conntrack-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/conntrack-tools/conntrack-tools.hash b/package/conntrack-tools/conntrack-tools.hash index dd4fc168bc..371ede3432 100644 --- a/package/conntrack-tools/conntrack-tools.hash +++ b/package/conntrack-tools/conntrack-tools.hash @@ -1,4 +1,4 @@ # From https://netfilter.org/projects/conntrack-tools/downloads.html -sha256 590859cc848245dbfd9c6487761dd303b3a1771e007f4f42213063ca56205d5f conntrack-tools-1.4.6.tar.bz2 +sha256 099debcf57e81690ced57f516b493588a73518f48c14d656f823b29b4fc24b5d conntrack-tools-1.4.7.tar.bz2 # Locally calculated sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/conntrack-tools/conntrack-tools.mk b/package/conntrack-tools/conntrack-tools.mk index 55ea407924..ec633f0d54 100644 --- a/package/conntrack-tools/conntrack-tools.mk +++ b/package/conntrack-tools/conntrack-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -CONNTRACK_TOOLS_VERSION = 1.4.6 +CONNTRACK_TOOLS_VERSION = 1.4.7 CONNTRACK_TOOLS_SOURCE = conntrack-tools-$(CONNTRACK_TOOLS_VERSION).tar.bz2 CONNTRACK_TOOLS_SITE = http://www.netfilter.org/projects/conntrack-tools/files CONNTRACK_TOOLS_DEPENDENCIES = host-pkgconf \ -- 2.35.1 From bernd.kuhls at t-online.de Fri Oct 28 18:43:22 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 20:43:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.12 Message-ID: <20221028184322.8908-1-bernd.kuhls@t-online.de> Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 Fixes: - CVE-2022-31630: http://bugs.php.net/81739 - CVE-2022-37454: http://bugs.php.net/81738 Signed-off-by: Bernd Kuhls --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index c4c42a2c7d..bf81ebf3e8 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz +sha256 08243359e2204d842082269eedc15f08d2eca726d0e65b93fb11f4bfc51bbbab php-8.1.12.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 7136fd9744..a400a38af7 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.11 +PHP_VERSION = 8.1.12 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:24 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:24 +0200 Subject: [Buildroot] [PATCH 2/4] package/alsa-plugins: bump version to 1.2.7.1 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-2-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls --- package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:26 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:26 +0200 Subject: [Buildroot] [PATCH 4/4] package/alsa-utils: bump version to 1.2.8 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-4-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 which fixed UCM support, upstream however removed the UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls --- ...ay-aplay.c-make-UCM-support-optional.patch | 89 ------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) delete mode 100644 package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:25 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:25 +0200 Subject: [Buildroot] [PATCH 3/4] package/alsa-lib: bump version to 1.2.8 In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221028191526.122405-3-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls --- package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 6e474aa5e2..503dd4ddac 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:15:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:15:23 +0200 Subject: [Buildroot] [PATCH 1/4] package/alsa-lib: disable topology modules for static builds Message-ID: <20221028191526.122405-1-bernd.kuhls@t-online.de> With this fix to alsa-lib we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls --- package/alsa-lib/alsa-lib.mk | 1 + ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- package/alsa-utils/alsa-utils.mk | 3 -- 3 files changed, 1 insertion(+), 51 deletions(-) delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..6e474aa5e2 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -25,6 +25,7 @@ endif # Can't build with static & shared at the same time (1.0.25+) ifeq ($(BR2_STATIC_LIBS),y) ALSA_LIB_CONF_OPTS += \ + --disable-topology \ --enable-shared=no \ --without-libdl else diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:24:09 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:24:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/rsync: bump version to 3.2.7 Message-ID: <20221028192409.132447-1-bernd.kuhls@t-online.de> Release notes: https://download.samba.org/pub/rsync/NEWS Switched _SITE and package URL to https. Signed-off-by: Bernd Kuhls --- package/rsync/Config.in | 2 +- package/rsync/rsync.hash | 4 ++-- package/rsync/rsync.mk | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/rsync/Config.in b/package/rsync/Config.in index b952974efb..b572c701ec 100644 --- a/package/rsync/Config.in +++ b/package/rsync/Config.in @@ -7,4 +7,4 @@ config BR2_PACKAGE_RSYNC help File transfer program to keep remote files in sync. - http://rsync.samba.org/ + https://rsync.samba.org/ diff --git a/package/rsync/rsync.hash b/package/rsync/rsync.hash index f0ba4d321d..842b5c099f 100644 --- a/package/rsync/rsync.hash +++ b/package/rsync/rsync.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/rsync/src/rsync-3.2.5.tar.gz.asc -sha256 2ac4d21635cdf791867bc377c35ca6dda7f50d919a58be45057fd51600c69aba rsync-3.2.5.tar.gz +# https://rsync.samba.org/ftp/rsync/src/rsync-3.2.7.tar.gz.asc +sha256 4e7d9d3f6ed10878c58c5fb724a67dacf4b6aac7340b13e488fb2dc41346f2bb rsync-3.2.7.tar.gz # Locally calculated sha256 85c19ea50a224c2d0067a69c083584e5717b40b76610ec1218f91385775067dd COPYING diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b98..81ad4b9291 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -4,8 +4,8 @@ # ################################################################################ -RSYNC_VERSION = 3.2.5 -RSYNC_SITE = http://rsync.samba.org/ftp/rsync/src +RSYNC_VERSION = 3.2.7 +RSYNC_SITE = https://rsync.samba.org/ftp/rsync/src RSYNC_LICENSE = GPL-3.0+ with exceptions RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 19:25:46 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 21:25:46 +0200 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add Bernd Kuhls to package rsync Message-ID: <20221028192546.132535-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 22bb6223d5..cc645d047f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -452,6 +452,7 @@ F: package/python-pyicu/ F: package/python-pylru/ F: package/python-requests-oauthlib/ F: package/python-slob/ +F: package/rsync/ F: package/rtmpdump/ F: package/samba4/ F: package/softether/ -- 2.34.1 From bernd.kuhls at t-online.de Fri Oct 28 20:33:42 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Fri, 28 Oct 2022 22:33:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/libdrm: bump version to 2.4.113 Message-ID: <20221028203342.210288-1-bernd.kuhls@t-online.de> Switch various configure options from true/false to enabled/disabled due to upstream commits: https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 Signed-off-by: Bernd Kuhls --- package/libdrm/libdrm.hash | 6 ++--- package/libdrm/libdrm.mk | 54 +++++++++++++++++++------------------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash index 082a158074..a47e169bed 100644 --- a/package/libdrm/libdrm.hash +++ b/package/libdrm/libdrm.hash @@ -1,6 +1,6 @@ -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz # Hash for license file sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk index 79d9416ef0..34bd678c5a 100644 --- a/package/libdrm/libdrm.mk +++ b/package/libdrm/libdrm.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDRM_VERSION = 2.4.112 +LIBDRM_VERSION = 2.4.113 LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz LIBDRM_SITE = https://dri.freedesktop.org/libdrm LIBDRM_LICENSE = MIT @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ host-pkgconf LIBDRM_CONF_OPTS = \ - -Dcairo-tests=false \ - -Dman-pages=false + -Dcairo-tests=disabled \ + -Dman-pages=disabled ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) LIBDRM_DEPENDENCIES += libatomic_ops @@ -27,70 +27,70 @@ endif endif ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) -LIBDRM_CONF_OPTS += -Dintel=true +LIBDRM_CONF_OPTS += -Dintel=enabled LIBDRM_DEPENDENCIES += libpciaccess else -LIBDRM_CONF_OPTS += -Dintel=false +LIBDRM_CONF_OPTS += -Dintel=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) -LIBDRM_CONF_OPTS += -Dradeon=true +LIBDRM_CONF_OPTS += -Dradeon=enabled else -LIBDRM_CONF_OPTS += -Dradeon=false +LIBDRM_CONF_OPTS += -Dradeon=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) -LIBDRM_CONF_OPTS += -Damdgpu=true +LIBDRM_CONF_OPTS += -Damdgpu=enabled else -LIBDRM_CONF_OPTS += -Damdgpu=false +LIBDRM_CONF_OPTS += -Damdgpu=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) -LIBDRM_CONF_OPTS += -Dnouveau=true +LIBDRM_CONF_OPTS += -Dnouveau=enabled else -LIBDRM_CONF_OPTS += -Dnouveau=false +LIBDRM_CONF_OPTS += -Dnouveau=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) -LIBDRM_CONF_OPTS += -Dvmwgfx=true +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled else -LIBDRM_CONF_OPTS += -Dvmwgfx=false +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) -LIBDRM_CONF_OPTS += -Domap=true +LIBDRM_CONF_OPTS += -Domap=enabled else -LIBDRM_CONF_OPTS += -Domap=false +LIBDRM_CONF_OPTS += -Domap=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) -LIBDRM_CONF_OPTS += -Detnaviv=true +LIBDRM_CONF_OPTS += -Detnaviv=enabled else -LIBDRM_CONF_OPTS += -Detnaviv=false +LIBDRM_CONF_OPTS += -Detnaviv=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) -LIBDRM_CONF_OPTS += -Dexynos=true +LIBDRM_CONF_OPTS += -Dexynos=enabled else -LIBDRM_CONF_OPTS += -Dexynos=false +LIBDRM_CONF_OPTS += -Dexynos=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) -LIBDRM_CONF_OPTS += -Dfreedreno=true +LIBDRM_CONF_OPTS += -Dfreedreno=enabled else -LIBDRM_CONF_OPTS += -Dfreedreno=false +LIBDRM_CONF_OPTS += -Dfreedreno=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) -LIBDRM_CONF_OPTS += -Dtegra=true +LIBDRM_CONF_OPTS += -Dtegra=enabled else -LIBDRM_CONF_OPTS += -Dtegra=false +LIBDRM_CONF_OPTS += -Dtegra=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) -LIBDRM_CONF_OPTS += -Dvc4=true +LIBDRM_CONF_OPTS += -Dvc4=enabled else -LIBDRM_CONF_OPTS += -Dvc4=false +LIBDRM_CONF_OPTS += -Dvc4=disabled endif ifeq ($(BR2_PACKAGE_HAS_UDEV),y) @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false endif ifeq ($(BR2_PACKAGE_VALGRIND),y) -LIBDRM_CONF_OPTS += -Dvalgrind=true +LIBDRM_CONF_OPTS += -Dvalgrind=enabled LIBDRM_DEPENDENCIES += valgrind else -LIBDRM_CONF_OPTS += -Dvalgrind=false +LIBDRM_CONF_OPTS += -Dvalgrind=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) -- 2.34.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:02:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:02:45 +0200 Subject: [Buildroot] [PATCH 1/1] package/pinentry: bump to version 1.2.1 Message-ID: <20221028210245.41609-1-fontaine.fabrice@gmail.com> https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 Signed-off-by: Fabrice Fontaine --- package/pinentry/pinentry.hash | 4 ++-- package/pinentry/pinentry.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/pinentry/pinentry.hash b/package/pinentry/pinentry.hash index e5f3d90652..187c86f9bd 100644 --- a/package/pinentry/pinentry.hash +++ b/package/pinentry/pinentry.hash @@ -1,5 +1,5 @@ # From https://www.gnupg.org/download/integrity_check.html -sha1 b8b88cab4fd844e3616d55aeba8f084f2b98fb0f pinentry-1.1.1.tar.bz2 +sha1 29daaf45f15cb5b8ec9b4a06284343f7a87082fb pinentry-1.2.1.tar.bz2 # Locally computed -sha256 cd12a064013ed18e2ee8475e669b9f58db1b225a0144debdb85a68cecddba57f pinentry-1.1.1.tar.bz2 +sha256 457a185e5a85238fb945a955dc6352ab962dc8b48720b62fc9fa48c7540a4067 pinentry-1.2.1.tar.bz2 sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 COPYING diff --git a/package/pinentry/pinentry.mk b/package/pinentry/pinentry.mk index 5a1519479c..26b55b1366 100644 --- a/package/pinentry/pinentry.mk +++ b/package/pinentry/pinentry.mk @@ -4,7 +4,7 @@ # ################################################################################ -PINENTRY_VERSION = 1.1.1 +PINENTRY_VERSION = 1.2.1 PINENTRY_SOURCE = pinentry-$(PINENTRY_VERSION).tar.bz2 PINENTRY_SITE = https://www.gnupg.org/ftp/gcrypt/pinentry PINENTRY_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:15:46 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:15:46 +0200 Subject: [Buildroot] [PATCH 1/1] package/pcsc-lite: bump to version 1.9.9 Message-ID: <20221028211546.220832-1-fontaine.fabrice@gmail.com> https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 Signed-off-by: Fabrice Fontaine --- package/pcsc-lite/pcsc-lite.hash | 2 +- package/pcsc-lite/pcsc-lite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pcsc-lite/pcsc-lite.hash b/package/pcsc-lite/pcsc-lite.hash index 340a9edbea..4326822e41 100644 --- a/package/pcsc-lite/pcsc-lite.hash +++ b/package/pcsc-lite/pcsc-lite.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 502d80c557ecbee285eb99fe8703eeb667bcfe067577467b50efe3420d1b2289 pcsc-lite-1.9.8.tar.bz2 +sha256 cbcc3b34c61f53291cecc0d831423c94d437b188eb2b97b7febc08de1c914e8a pcsc-lite-1.9.9.tar.bz2 sha256 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 GPL-3.0.txt diff --git a/package/pcsc-lite/pcsc-lite.mk b/package/pcsc-lite/pcsc-lite.mk index 34950dd866..0b92380ccb 100644 --- a/package/pcsc-lite/pcsc-lite.mk +++ b/package/pcsc-lite/pcsc-lite.mk @@ -4,7 +4,7 @@ # ################################################################################ -PCSC_LITE_VERSION = 1.9.8 +PCSC_LITE_VERSION = 1.9.9 PCSC_LITE_SOURCE = pcsc-lite-$(PCSC_LITE_VERSION).tar.bz2 PCSC_LITE_SITE = https://pcsclite.apdu.fr/files PCSC_LITE_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:31:27 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:31:27 +0200 Subject: [Buildroot] [PATCH 1/1] package/slang: bump to version 2.3.3 Message-ID: <20221028213127.243377-1-fontaine.fabrice@gmail.com> Refresh patch http://lists.jedsoft.org/lists/slang-users/2022/0000005.html Signed-off-by: Fabrice Fontaine --- package/slang/0001-slsh-libs.patch | 6 ++++-- package/slang/slang.hash | 4 ++-- package/slang/slang.mk | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch index 211cb4a0e0..fad16d1b2f 100644 --- a/package/slang/0001-slsh-libs.patch +++ b/package/slang/0001-slsh-libs.patch @@ -5,6 +5,8 @@ probably Diego Petten?. Signed-off-by: Gustavo Zacarias [Bernd: rebased against 2.3.1a] Signed-off-by: Bernd Kuhls +[Fabrice: rebased against 2.3.3] +Signed-off-by: Fabrice Fontaine --- a/slsh/Makefile.in +++ b/slsh/Makefile.in @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile diff --git a/package/slang/slang.hash b/package/slang/slang.hash index 3e211ab548..563117b48a 100644 --- a/package/slang/slang.hash +++ b/package/slang/slang.hash @@ -1,6 +1,6 @@ # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 # License file, locally computed sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING diff --git a/package/slang/slang.mk b/package/slang/slang.mk index 44a0148088..e0f5968b46 100644 --- a/package/slang/slang.mk +++ b/package/slang/slang.mk @@ -4,7 +4,7 @@ # ################################################################################ -SLANG_VERSION = 2.3.2 +SLANG_VERSION = 2.3.3 SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 SLANG_SITE = http://www.jedsoft.org/releases/slang SLANG_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:48:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:48:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/sngrep: bump to version 1.6.0 Message-ID: <20221028214811.273143-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - pcre2 is an optional dependency since https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc - zlib is an optional dependency since https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog Signed-off-by: Fabrice Fontaine --- ...nssl.h-fix-build-with-libressl-3.5.0.patch | 40 ------------------- package/sngrep/sngrep.hash | 6 +-- package/sngrep/sngrep.mk | 21 +++++++--- 3 files changed, 19 insertions(+), 48 deletions(-) delete mode 100644 package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch diff --git a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch b/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch deleted file mode 100644 index 7dbb29ab00..0000000000 --- a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 29 Apr 2022 18:53:45 +0200 -Subject: [PATCH] src/capture_openssl.h: fix build with libressl >= 3.5.0 - -Fix the following build failure with libressl >= 3.5.0: - -capture_openssl.c: In function 'P_hash': -capture_openssl.c:101:18: error: storage size of 'hm' isn't known - 101 | HMAC_CTX hm; - | ^~ - -Fixes: - - http://autobuild.buildroot.org/results/f1e8cdb3ac35a30055ab79d41e6cc038e5339c37 - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/irontec/sngrep/commit/4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761] ---- - src/capture_openssl.h | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/src/capture_openssl.h b/src/capture_openssl.h -index 780de494..1f87a5cd 100644 ---- a/src/capture_openssl.h -+++ b/src/capture_openssl.h -@@ -67,10 +67,11 @@ - #endif - - /* LibreSSL declares OPENSSL_VERSION_NUMBER == 2.0 but does not include most -- * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) -+ * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) until -+ * version 3.5.0 - */ - #if defined(LIBRESSL_VERSION_NUMBER) --#define MODSSL_USE_OPENSSL_PRE_1_1_API (1) -+#define MODSSL_USE_OPENSSL_PRE_1_1_API (LIBRESSL_VERSION_NUMBER < 0x30500000L) - #else - #define MODSSL_USE_OPENSSL_PRE_1_1_API (OPENSSL_VERSION_NUMBER < 0x10100000L) - #endif diff --git a/package/sngrep/sngrep.hash b/package/sngrep/sngrep.hash index 33fa91ef5e..60a32022e6 100644 --- a/package/sngrep/sngrep.hash +++ b/package/sngrep/sngrep.hash @@ -1,6 +1,6 @@ -# From https://github.com/irontec/sngrep/releases/download/v1.4.7/sngrep-1.4.7.tar.gz.md5sum -md5 78fe753e24f36ddaf627bc2b734f45ba sngrep-1.4.7.tar.gz +# From https://github.com/irontec/sngrep/releases/download/v1.6.0/sngrep-1.6.0.tar.gz.md5sum +md5 1519ca6cd1167c0722debfb96e2ac173 sngrep-1.6.0.tar.gz # Locally computed -sha256 3c96aadd8b8c6b7adb5552d6fb4234f2000f15109b0f6c5feb632c81306cc49b sngrep-1.4.7.tar.gz +sha256 fd80964d6560f2ff57b4f5bef2353d1a6f7c48d2f1a5f0a167c854bd2e801999 sngrep-1.6.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk index 841a7bb991..7b614f1770 100644 --- a/package/sngrep/sngrep.mk +++ b/package/sngrep/sngrep.mk @@ -4,8 +4,9 @@ # ################################################################################ -SNGREP_VERSION = 1.4.7 -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) +SNGREP_VERSION = 1.6.0 +SNGREP_SITE = \ + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) SNGREP_LICENSE = GPL-3.0+ SNGREP_LICENSE_FILES = LICENSE SNGREP_AUTORECONF = YES @@ -29,11 +30,21 @@ else SNGREP_CONF_OPTS += --without-gnutls --without-openssl endif -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) +SNGREP_DEPENDENCIES += pcre2 +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 +else ifeq ($(BR2_PACKAGE_PCRE),y) SNGREP_DEPENDENCIES += pcre -SNGREP_CONF_OPTS += --with-pcre +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 else -SNGREP_CONF_OPTS += --without-pcre +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 +endif + +ifeq ($(BR2_PACKAGE_ZLIB),y) +SNGREP_DEPENDENCIES += zlib +SNGREP_CONF_OPTS += --with-zlib +else +SNGREP_CONF_OPTS += --without-zlib endif $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 21:53:25 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Fri, 28 Oct 2022 23:53:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/smartmontools: bump to version 7.3 Message-ID: <20221028215325.278206-1-fontaine.fabrice@gmail.com> https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 Signed-off-by: Fabrice Fontaine --- package/smartmontools/smartmontools.hash | 8 ++++---- package/smartmontools/smartmontools.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash index 3c5535b29a..e48e955d01 100644 --- a/package/smartmontools/smartmontools.hash +++ b/package/smartmontools/smartmontools.hash @@ -1,7 +1,7 @@ -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz # Locally computed -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk index 2e2bbcd4e2..d24f008df4 100644 --- a/package/smartmontools/smartmontools.mk +++ b/package/smartmontools/smartmontools.mk @@ -4,7 +4,7 @@ # ################################################################################ -SMARTMONTOOLS_VERSION = 7.2 +SMARTMONTOOLS_VERSION = 7.3 SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) SMARTMONTOOLS_LICENSE = GPL-2.0+ SMARTMONTOOLS_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Fri Oct 28 22:02:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 00:02:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/taglib: bump to version 1.13 Message-ID: <20221028220223.286949-1-fontaine.fabrice@gmail.com> - Drop patch (already in version) - Use WITH_ZLIB which is available since https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e https://github.com/taglib/taglib/releases/tag/v1.13 Signed-off-by: Fabrice Fontaine --- ...e-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ------------------- package/taglib/taglib.hash | 2 +- package/taglib/taglib.mk | 5 ++- 3 files changed, 5 insertions(+), 36 deletions(-) delete mode 100644 package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch deleted file mode 100644 index d8af73cb08..0000000000 --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 -From: Oleg Antonyan -Date: Thu, 13 May 2021 16:41:35 +0200 -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= - =?UTF-8?q?=201.12=20(#1012)?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -* fix error: duplicate volatile - -* fix volatile ATOMIC_INT in constructor - -[Retrieved from: -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] -Signed-off-by: Fabrice Fontaine ---- - taglib/toolkit/trefcounter.cpp | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp -index 18cb596c0..5b089abf9 100644 ---- a/taglib/toolkit/trefcounter.cpp -+++ b/taglib/toolkit/trefcounter.cpp -@@ -52,7 +52,7 @@ - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) - #else --# define ATOMIC_INT volatile int -+# define ATOMIC_INT int - # define ATOMIC_INC(x) (++x) - # define ATOMIC_DEC(x) (--x) - #endif diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash index 38a44b41a5..7d1b2e8422 100644 --- a/package/taglib/taglib.hash +++ b/package/taglib/taglib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk index 9513e0d0e1..c687891002 100644 --- a/package/taglib/taglib.mk +++ b/package/taglib/taglib.mk @@ -4,7 +4,7 @@ # ################################################################################ -TAGLIB_VERSION = 1.12 +TAGLIB_VERSION = 1.13 TAGLIB_SITE = http://taglib.github.io/releases TAGLIB_INSTALL_STAGING = YES TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib ifeq ($(BR2_PACKAGE_ZLIB),y) TAGLIB_DEPENDENCIES += zlib +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON +else +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF endif define TAGLIB_REMOVE_DEVFILE -- 2.35.1 From james.hilliard1 at gmail.com Fri Oct 28 22:38:44 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 16:38:44 -0600 Subject: [Buildroot] [PATCH 1/1] package/gcc: ensure __register_frame is optimized out for glibc Message-ID: <20221028223844.1180418-1-james.hilliard1@gmail.com> On some architectures when building with -O0 the __register_frame symbol fails to get optimized out which can cause linking failures when building glibc. To fix this set -O1 for GCC target libs when building with glibc and BR2_OPTIMIZE_0 on the problematic target architectures. Fixes: - http://autobuild.buildroot.net/results/89b/89b6c6924240b7cf82035a844f3573673e91b364 - http://autobuild.buildroot.net/results/46f/46f4ec99d2b23d354a4bb5e92123d64f0da6ed27 - http://autobuild.buildroot.net/results/839/839f929f700cf181ebdf34389c7806a96f55813e - http://autobuild.buildroot.net/results/0e2/0e202bf53a683930f3cad6edef2a4dea629eaecb - http://autobuild.buildroot.net/results/8a8/8a8c917f597fdcca744e696e19e9300b64004335 - http://autobuild.buildroot.net/results/c05/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 - http://autobuild.buildroot.net/results/8ba/8ba8882a861cf7df359c23969c09b2be0725b2e5 Signed-off-by: James Hilliard --- package/gcc/gcc.mk | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/package/gcc/gcc.mk b/package/gcc/gcc.mk index ec6f3b550a..a339f77970 100644 --- a/package/gcc/gcc.mk +++ b/package/gcc/gcc.mk @@ -103,6 +103,15 @@ GCC_COMMON_TARGET_CFLAGS += -matomic GCC_COMMON_TARGET_CXXFLAGS += -matomic endif +# Enable GCC target libs optimizations to optimize out __register_frame +# when needed for some architectures when building with glibc. +ifeq ($(BR2_TOOLCHAIN_USES_GLIBC)$(BR2_OPTIMIZE_0),yy) +ifeq ($(BR2_microblazebe)$(BR2_microblazeel)$(BR2_mips)$(BR2_mipsel)$(BR2_nios2)$(BR2_or1k)$(BR2_sh),y) +GCC_COMMON_TARGET_CFLAGS += -O1 +GCC_COMMON_TARGET_CXXFLAGS += -O1 +endif +endif + # Propagate options used for target software building to GCC target libs HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)" HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)" -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 00:04:37 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 18:04:37 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiohttp-session: bump to version 2.12.0 Message-ID: <20221029000437.1305667-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiohttp-session/python-aiohttp-session.hash b/package/python-aiohttp-session/python-aiohttp-session.hash index 8b44318307..efdac39007 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.hash +++ b/package/python-aiohttp-session/python-aiohttp-session.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiohttp-session/json -md5 797273eb5f0ef9e95fa92c6a933cf4ad aiohttp-session-2.11.0.tar.gz -sha256 0fdf39600f6a05c4943ef6c7b099071ca9854413111a26761626244be5015dc4 aiohttp-session-2.11.0.tar.gz +md5 b89bde69f6f3c61a991ff408d2733838 aiohttp-session-2.12.0.tar.gz +sha256 0ccd11a7c77cb9e5a61f4daacdc9170d561112f9cfaf9e9a2d9867c0587d1950 aiohttp-session-2.12.0.tar.gz # Locally computed sha256 checksums sha256 7bc5dd2f229a6b922befb1427fd4ad2c0b255f12c1b1869370ba77520dc22bc7 LICENSE diff --git a/package/python-aiohttp-session/python-aiohttp-session.mk b/package/python-aiohttp-session/python-aiohttp-session.mk index 3d59b75e3d..55bf0e87f3 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.mk +++ b/package/python-aiohttp-session/python-aiohttp-session.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOHTTP_SESSION_VERSION = 2.11.0 +PYTHON_AIOHTTP_SESSION_VERSION = 2.12.0 PYTHON_AIOHTTP_SESSION_SOURCE = aiohttp-session-$(PYTHON_AIOHTTP_SESSION_VERSION).tar.gz -PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/3b/a7/0b97b9a2e3a553a86a6703f86b0e9b1afb2b262849700e8f80015c0f643f +PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/34/87/8dbc1385c875497d6bc16c9d94e25dbd8ff62599843b73fb4048ba74c867 PYTHON_AIOHTTP_SESSION_SETUP_TYPE = setuptools PYTHON_AIOHTTP_SESSION_LICENSE = Apache-2.0 PYTHON_AIOHTTP_SESSION_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 00:19:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 18:19:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-typing-extensions: bump to version 4.4.0 Message-ID: <20221029001917.1312839-1-james.hilliard1@gmail.com> License hash changed due to date/formatting updates: https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f Signed-off-by: James Hilliard --- .../python-typing-extensions/python-typing-extensions.hash | 6 +++--- .../python-typing-extensions/python-typing-extensions.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-typing-extensions/python-typing-extensions.hash b/package/python-typing-extensions/python-typing-extensions.hash index 2512ed042d..249bb63a42 100644 --- a/package/python-typing-extensions/python-typing-extensions.hash +++ b/package/python-typing-extensions/python-typing-extensions.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/typing_extensions/json -md5 30ff8c89459dd93970a92a90b0386aba typing_extensions-4.3.0.tar.gz -sha256 e6d2677a32f47fc7eb2795db1dd15c1f34eff616bcaf2cfb5e997f854fa1c4a6 typing_extensions-4.3.0.tar.gz +md5 5cfcb56ea6fc4972c3600c0030f4d136 typing_extensions-4.4.0.tar.gz +sha256 1511434bb92bf8dd198c12b1cc812e800d4181cfcb867674e0f8279cc93087aa typing_extensions-4.4.0.tar.gz # Locally computed sha256 checksums -sha256 ff17ce94e102024deb68773eb1cc74ca76da4e658f373531f0ac22d68a6bb1ad LICENSE +sha256 c7afb65e755707b9fb90487389a176d3ed3d0031d5131afde45c23715ff5e891 LICENSE diff --git a/package/python-typing-extensions/python-typing-extensions.mk b/package/python-typing-extensions/python-typing-extensions.mk index 2b8c23f354..fd7d0bd93a 100644 --- a/package/python-typing-extensions/python-typing-extensions.mk +++ b/package/python-typing-extensions/python-typing-extensions.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TYPING_EXTENSIONS_VERSION = 4.3.0 +PYTHON_TYPING_EXTENSIONS_VERSION = 4.4.0 PYTHON_TYPING_EXTENSIONS_SOURCE = typing_extensions-$(PYTHON_TYPING_EXTENSIONS_VERSION).tar.gz -PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/9e/1d/d128169ff58c501059330f1ad96ed62b79114a2eb30b8238af63a2e27f70 +PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/e3/a7/8f4e456ef0adac43f452efc2d0e4b242ab831297f1bac60ac815d37eb9cf PYTHON_TYPING_EXTENSIONS_SETUP_TYPE = flit PYTHON_TYPING_EXTENSIONS_LICENSE = Python-2.0 PYTHON_TYPING_EXTENSIONS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:42:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:42:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-tinycss2: bump to version 1.2.1 Message-ID: <20221029014217.1408835-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-tinycss2/python-tinycss2.hash | 4 ++-- package/python-tinycss2/python-tinycss2.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-tinycss2/python-tinycss2.hash b/package/python-tinycss2/python-tinycss2.hash index e8e1d93f83..f9b638df6c 100644 --- a/package/python-tinycss2/python-tinycss2.hash +++ b/package/python-tinycss2/python-tinycss2.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/tinycss2/json -md5 60272f58f8d5834b2e09ffbc9bd5de53 tinycss2-1.1.1.tar.gz -sha256 b2e44dd8883c360c35dd0d1b5aad0b610e5156c2cb3b33434634e539ead9d8bf tinycss2-1.1.1.tar.gz +md5 e8a06102e7f42ca791463f11ce7b814d tinycss2-1.2.1.tar.gz +sha256 8cff3a8f066c2ec677c06dbc7b45619804a6938478d9d73c284b29d14ecb0627 tinycss2-1.2.1.tar.gz # Locally computed sha256 checksums sha256 6b94acee20ec9f2709333134f3ba70322535fb420af0ce8c1455d9cbe297f1d5 LICENSE diff --git a/package/python-tinycss2/python-tinycss2.mk b/package/python-tinycss2/python-tinycss2.mk index e4fc5dc9c5..de26639587 100644 --- a/package/python-tinycss2/python-tinycss2.mk +++ b/package/python-tinycss2/python-tinycss2.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TINYCSS2_VERSION = 1.1.1 +PYTHON_TINYCSS2_VERSION = 1.2.1 PYTHON_TINYCSS2_SOURCE = tinycss2-$(PYTHON_TINYCSS2_VERSION).tar.gz -PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/1e/5a/576828164b5486f319c4323915b915a8af3fa4a654bbb6f8fc8e87b5cb17 +PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/75/be/24179dfaa1d742c9365cbd0e3f0edc5d3aa3abad415a2327c5a6ff8ca077 PYTHON_TINYCSS2_SETUP_TYPE = flit PYTHON_TINYCSS2_LICENSE = BSD-3-Clause PYTHON_TINYCSS2_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:20:20 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:20:20 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-attrs: bump to version 22.1.0 Message-ID: <20221029012020.1396608-1-james.hilliard1@gmail.com> License hash changed due to ownership clarification: https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 Signed-off-by: James Hilliard --- package/python-attrs/python-attrs.hash | 6 +++--- package/python-attrs/python-attrs.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-attrs/python-attrs.hash b/package/python-attrs/python-attrs.hash index 823a9459bd..d5548c0ed3 100644 --- a/package/python-attrs/python-attrs.hash +++ b/package/python-attrs/python-attrs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/attrs/json -md5 5a9b5e9ceebc380a13fb93235b11bbda attrs-21.4.0.tar.gz -sha256 626ba8234211db98e869df76230a137c4c40a12d72445c45d5f5b716f076e2fd attrs-21.4.0.tar.gz +md5 0487081b7ead8753fc46cf7c6d1e28e3 attrs-22.1.0.tar.gz +sha256 29adc2665447e5191d0e7c568fde78b21f9672d344281d0c6e1ab085429b22b6 attrs-22.1.0.tar.gz # Locally computed sha256 checksums -sha256 bf659a28b49240602f56bbdf490cbe2ec509b15b98f99d7b19a52c740e327863 LICENSE +sha256 882115c95dfc2af1eeb6714f8ec6d5cbcabf667caff8729f42420da63f714e9f LICENSE diff --git a/package/python-attrs/python-attrs.mk b/package/python-attrs/python-attrs.mk index 4877d62285..33651ee80a 100644 --- a/package/python-attrs/python-attrs.mk +++ b/package/python-attrs/python-attrs.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ATTRS_VERSION = 21.4.0 +PYTHON_ATTRS_VERSION = 22.1.0 PYTHON_ATTRS_SOURCE = attrs-$(PYTHON_ATTRS_VERSION).tar.gz -PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/d7/77/ebb15fc26d0f815839ecd897b919ed6d85c050feeb83e100e020df9153d2 +PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/1a/cb/c4ffeb41e7137b23755a45e1bfec9cbb76ecf51874c6f1d113984ecaa32c PYTHON_ATTRS_SETUP_TYPE = setuptools PYTHON_ATTRS_LICENSE = MIT PYTHON_ATTRS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:27:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:27:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-charset-normalizer: bump to version 3.0.0 Message-ID: <20221029012704.1399837-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- .../python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- .../python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-charset-normalizer/python-charset-normalizer.hash b/package/python-charset-normalizer/python-charset-normalizer.hash index 3d50b2872d..32d8a22e66 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.hash +++ b/package/python-charset-normalizer/python-charset-normalizer.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/charset-normalizer/json -md5 a70f9fc85b6b8265c982eca6fe51381f charset-normalizer-2.1.1.tar.gz -sha256 5a3d016c7c547f69d6f81fb0db9449ce888b418b5b9952cc5e6e66843e9dd845 charset-normalizer-2.1.1.tar.gz +md5 169527085be8e6bb7874164c24481eca charset-normalizer-3.0.0.tar.gz +sha256 b27d10ad15740b45fd55f76e6901a4391e6dca3917ef48ecdcf17edf6e00d770 charset-normalizer-3.0.0.tar.gz # Locally computed sha256 checksums sha256 eb31a0c5a4fb09b8a4e32055d25c1e5f9c358a2752fef3cd720213d1ccfee241 LICENSE diff --git a/package/python-charset-normalizer/python-charset-normalizer.mk b/package/python-charset-normalizer/python-charset-normalizer.mk index 72728a25b3..b2c42a74b8 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.mk +++ b/package/python-charset-normalizer/python-charset-normalizer.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CHARSET_NORMALIZER_VERSION = 2.1.1 +PYTHON_CHARSET_NORMALIZER_VERSION = 3.0.0 PYTHON_CHARSET_NORMALIZER_SOURCE = charset-normalizer-$(PYTHON_CHARSET_NORMALIZER_VERSION).tar.gz -PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/a1/34/44964211e5410b051e4b8d2869c470ae8a68ae274953b1c7de6d98bbcf94 +PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/fe/77/6d5d367b7cfee812a88573e80bbe25cea2d015ed2c3490e4464951ff3232 PYTHON_CHARSET_NORMALIZER_SETUP_TYPE = setuptools PYTHON_CHARSET_NORMALIZER_LICENSE = MIT PYTHON_CHARSET_NORMALIZER_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:06:12 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:06:12 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-weasyprint: bump to version 57.0 Message-ID: <20221029010612.1391444-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-weasyprint/python-weasyprint.hash | 4 ++-- package/python-weasyprint/python-weasyprint.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-weasyprint/python-weasyprint.hash b/package/python-weasyprint/python-weasyprint.hash index 68b895361b..21e58d3677 100644 --- a/package/python-weasyprint/python-weasyprint.hash +++ b/package/python-weasyprint/python-weasyprint.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/weasyprint/json -md5 0a339942d1d238aa0b974c1ec1580c03 weasyprint-56.1.tar.gz -sha256 27f796abce8edebc9e5b3cff2d095a9fa2b0af5766801431659db51203c70b38 weasyprint-56.1.tar.gz +md5 b270213554d781c86b6c3d390b097f2f weasyprint-57.0.tar.gz +sha256 7b6f5cc13819e9a7d8748c1dbf0e8d2444f7a4818a98339f82dccaa822bf911b weasyprint-57.0.tar.gz # Locally computed sha256 checksums sha256 bfd14eccfa6100575460e685556b183399d4bd335904e3c9521b0116d21c54da LICENSE diff --git a/package/python-weasyprint/python-weasyprint.mk b/package/python-weasyprint/python-weasyprint.mk index aff9a31a43..9dd364e1c1 100644 --- a/package/python-weasyprint/python-weasyprint.mk +++ b/package/python-weasyprint/python-weasyprint.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WEASYPRINT_VERSION = 56.1 +PYTHON_WEASYPRINT_VERSION = 57.0 PYTHON_WEASYPRINT_SOURCE = weasyprint-$(PYTHON_WEASYPRINT_VERSION).tar.gz -PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/30/2c/9c29989bf03bb573bd963c2cf167839099bdaff05aff1f0eff2ccbd1b509 +PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/b7/98/cd0df64b306ac901ffd53c50d9d5d79d92cae756b6469fc14771adb39d77 PYTHON_WEASYPRINT_SETUP_TYPE = flit PYTHON_WEASYPRINT_LICENSE = BSD-3-Clause PYTHON_WEASYPRINT_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:23:21 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:23:21 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-certifi: bump to version 2022.9.24 Message-ID: <20221029012321.1398031-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-certifi/python-certifi.hash | 4 ++-- package/python-certifi/python-certifi.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-certifi/python-certifi.hash b/package/python-certifi/python-certifi.hash index ac3d0a909b..0557a5c97c 100644 --- a/package/python-certifi/python-certifi.hash +++ b/package/python-certifi/python-certifi.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/certifi/json -md5 f919a230b999ebae1969088ca68e8367 certifi-2022.9.14.tar.gz -sha256 36973885b9542e6bd01dea287b2b4b3b21236307c56324fcc3f1160f2d655ed5 certifi-2022.9.14.tar.gz +md5 ff9c8d5c7e7fb083de6b874609c5ca68 certifi-2022.9.24.tar.gz +sha256 0d9c601124e5a6ba9712dbc60d9c53c21e34f5f641fe83002317394311bdce14 certifi-2022.9.24.tar.gz # Locally computed sha256 checksums sha256 a02f6c638f9fb84d06f7764c3ab085d8af7eda5b93c166da54312479077c6fb0 LICENSE diff --git a/package/python-certifi/python-certifi.mk b/package/python-certifi/python-certifi.mk index 2053d5e820..8e2435199f 100644 --- a/package/python-certifi/python-certifi.mk +++ b/package/python-certifi/python-certifi.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CERTIFI_VERSION = 2022.9.14 +PYTHON_CERTIFI_VERSION = 2022.9.24 PYTHON_CERTIFI_SOURCE = certifi-$(PYTHON_CERTIFI_VERSION).tar.gz -PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/ca/48/88ec470f8b68319b6782ca3a0570789886ad5ca24c1af2f3771699135baa +PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/cb/a4/7de7cd59e429bd0ee6521ba58a75adaec136d32f91a761b28a11d8088d44 PYTHON_CERTIFI_SETUP_TYPE = setuptools PYTHON_CERTIFI_LICENSE = ISC (Python code), MPL-2.0 (cacert.pem) PYTHON_CERTIFI_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:33:21 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:33:21 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-cssutils: bump to version 2.6.0 Message-ID: <20221029013321.1403408-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-cssutils/python-cssutils.hash | 4 ++-- package/python-cssutils/python-cssutils.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-cssutils/python-cssutils.hash b/package/python-cssutils/python-cssutils.hash index a3d2a6be6c..cb989131a3 100644 --- a/package/python-cssutils/python-cssutils.hash +++ b/package/python-cssutils/python-cssutils.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/cssutils/json -md5 974bf7f07d52f92dd29485b6e7529aac cssutils-2.5.1.tar.gz -sha256 b4a4da58e78326ec9f4a9d3555004ddf706f3e99f7a1026c1880f0934362b8b4 cssutils-2.5.1.tar.gz +md5 b01ea364e79eada181c3ae46d69249af cssutils-2.6.0.tar.gz +sha256 f7dcd23c1cec909fdf3630de346e1413b7b2555936dec14ba2ebb9913bf0818e cssutils-2.6.0.tar.gz # Locally computed sha256 checksums sha256 03c570a068086ee577dcd795519ea93462b2ed2fcb6dcc4dfce56a71a2fd6e5a COPYING.LESSER diff --git a/package/python-cssutils/python-cssutils.mk b/package/python-cssutils/python-cssutils.mk index 3acf26b3d5..fff9e393f3 100644 --- a/package/python-cssutils/python-cssutils.mk +++ b/package/python-cssutils/python-cssutils.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CSSUTILS_VERSION = 2.5.1 +PYTHON_CSSUTILS_VERSION = 2.6.0 PYTHON_CSSUTILS_SOURCE = cssutils-$(PYTHON_CSSUTILS_VERSION).tar.gz -PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/bd/f0/d3a02af54f292fe9d1f6bb18c7d2f79992b5cbae0db1ee91e5c73a3c7d7c +PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/43/d5/505d96b7456fd334f8b963c05bd9425dacd317e209bb9adf103613339325 PYTHON_CSSUTILS_LICENSE = LGPL-3.0+ PYTHON_CSSUTILS_LICENSE_FILES = COPYING.LESSER PYTHON_CSSUTILS_SETUP_TYPE = setuptools -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:37:17 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:37:17 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-fonttools: bump to version 4.38.0 Message-ID: <20221029013717.1406350-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-fonttools/python-fonttools.hash | 4 ++-- package/python-fonttools/python-fonttools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-fonttools/python-fonttools.hash b/package/python-fonttools/python-fonttools.hash index 58603f79a4..4b4751dc82 100644 --- a/package/python-fonttools/python-fonttools.hash +++ b/package/python-fonttools/python-fonttools.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/fonttools/json -md5 6cad81799e0491751cda0a98642b00eb fonttools-4.37.3.zip -sha256 f32ef6ec966cf0e7d2aa88601fed2e3a8f2851c26b5db2c80ccc8f82bee4eedc fonttools-4.37.3.zip +md5 f4775967d29b0da2f29ba499eed34f88 fonttools-4.38.0.zip +sha256 2bb244009f9bf3fa100fc3ead6aeb99febe5985fa20afbfbaa2f8946c2fbdaf1 fonttools-4.38.0.zip # Locally computed sha256 checksums sha256 6787208f83f659ccbc2223b2fde952ffa6f7e8aca62f1a8a2bf5bc51bb1b2383 LICENSE diff --git a/package/python-fonttools/python-fonttools.mk b/package/python-fonttools/python-fonttools.mk index aad1765899..d31d3a2889 100644 --- a/package/python-fonttools/python-fonttools.mk +++ b/package/python-fonttools/python-fonttools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FONTTOOLS_VERSION = 4.37.3 +PYTHON_FONTTOOLS_VERSION = 4.38.0 PYTHON_FONTTOOLS_SOURCE = fonttools-$(PYTHON_FONTTOOLS_VERSION).zip -PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/c1/0d/d41b9c2295e1896f4c89e6b213790eee8e8e641b3e9709518f2bddcdeffa +PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/55/5c/a4a25cf6db42d113d8f626901bb156b2f7cf7c7564a6bbc7b5cd6f7cb484 PYTHON_FONTTOOLS_SETUP_TYPE = setuptools PYTHON_FONTTOOLS_LICENSE = MIT PYTHON_FONTTOOLS_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:14:24 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:14:24 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-aiofiles: bump to version 22.1.0 Message-ID: <20221029011424.1394984-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-aiofiles/python-aiofiles.hash | 4 ++-- package/python-aiofiles/python-aiofiles.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiofiles/python-aiofiles.hash b/package/python-aiofiles/python-aiofiles.hash index 268136a406..d1594c3989 100644 --- a/package/python-aiofiles/python-aiofiles.hash +++ b/package/python-aiofiles/python-aiofiles.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiofiles/json -md5 697deeb4fdcb620c45f114f173ed7c0d aiofiles-0.8.0.tar.gz -sha256 8334f23235248a3b2e83b2c3a78a22674f39969b96397126cc93664d9a901e59 aiofiles-0.8.0.tar.gz +md5 b22db90039c881f6aa64431c6b23f30f aiofiles-22.1.0.tar.gz +sha256 9107f1ca0b2a5553987a94a3c9959fe5b491fdf731389aa5b7b1bd0733e32de6 aiofiles-22.1.0.tar.gz # Locally computed sha256 checksums sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-aiofiles/python-aiofiles.mk b/package/python-aiofiles/python-aiofiles.mk index 996e5eb6c0..b65d2cfa82 100644 --- a/package/python-aiofiles/python-aiofiles.mk +++ b/package/python-aiofiles/python-aiofiles.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOFILES_VERSION = 0.8.0 +PYTHON_AIOFILES_VERSION = 22.1.0 PYTHON_AIOFILES_SOURCE = aiofiles-$(PYTHON_AIOFILES_VERSION).tar.gz -PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/10/ca/c416cfacf6a47e1400dad56eab85aa86c92c6fbe58447d12035e434f0d5c +PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/86/26/6e5060a159a6131c430e8a01ec8327405a19a449a506224b394e36f2ebc9 PYTHON_AIOFILES_SETUP_TYPE = setuptools PYTHON_AIOFILES_LICENSE = Apache-2.0 PYTHON_AIOFILES_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:10:39 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:10:39 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pydyf: bump to version 0.5.0 Message-ID: <20221029011039.1393998-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pydyf/python-pydyf.hash | 4 ++-- package/python-pydyf/python-pydyf.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pydyf/python-pydyf.hash b/package/python-pydyf/python-pydyf.hash index 4c80d3fce6..1b37e90e73 100644 --- a/package/python-pydyf/python-pydyf.hash +++ b/package/python-pydyf/python-pydyf.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/pydyf/json -md5 3afeaff9db93af8b317c909196522ddd pydyf-0.3.0.tar.gz -sha256 1aea6c0c97cc7b809efb5427147e168a5404ed76a53d76a3aea590d4ca1b04a3 pydyf-0.3.0.tar.gz +md5 6b2a02162a3f4be9464d7b4043953d33 pydyf-0.5.0.tar.gz +sha256 51e751ae1504037c1fc1f4815119137b011802cd5f6c3539db066c455b14a7e1 pydyf-0.5.0.tar.gz # Locally computed sha256 checksums sha256 75461e438973e1ba0f93a7de9e3fe5b2f49e1ab49251d392878a9cdae8ce7e47 LICENSE diff --git a/package/python-pydyf/python-pydyf.mk b/package/python-pydyf/python-pydyf.mk index ae88a0eb3d..6327a3efe2 100644 --- a/package/python-pydyf/python-pydyf.mk +++ b/package/python-pydyf/python-pydyf.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYDYF_VERSION = 0.3.0 +PYTHON_PYDYF_VERSION = 0.5.0 PYTHON_PYDYF_SOURCE = pydyf-$(PYTHON_PYDYF_VERSION).tar.gz -PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/4d/12/3341ead2313889e2bf49b18ab6d65f47f8a8fb82ccb91faaf74f5e51125f +PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/f4/4c/6d31b36a46714d8206b8ca84b8dc9aaf42093415b1f50471538552abe501 PYTHON_PYDYF_SETUP_TYPE = flit PYTHON_PYDYF_LICENSE = BSD-3-Clause PYTHON_PYDYF_LICENSE_FILES = LICENSE -- 2.34.1 From james.hilliard1 at gmail.com Sat Oct 29 01:00:36 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Fri, 28 Oct 2022 19:00:36 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-ujson: bump to version 5.5.0 Message-ID: <20221029010036.1388698-1-james.hilliard1@gmail.com> Switch to now supported system double-conversion library. Disable built in strip so that stripping is handled by buildroot. Signed-off-by: James Hilliard --- package/python-ujson/Config.in | 3 ++- package/python-ujson/python-ujson.hash | 4 ++-- package/python-ujson/python-ujson.mk | 10 +++++++--- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/package/python-ujson/Config.in b/package/python-ujson/Config.in index 7af03e6497..31b4d484d8 100644 --- a/package/python-ujson/Config.in +++ b/package/python-ujson/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_UJSON bool "python-ujson" - depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_INSTALL_LIBSTDCPP # double-conversion + select BR2_PACKAGE_DOUBLE_CONVERSION help UltraJSON is an ultra fast JSON encoder and decoder written in pure C with bindings for Python 3. diff --git a/package/python-ujson/python-ujson.hash b/package/python-ujson/python-ujson.hash index e88e273145..27df5aa355 100644 --- a/package/python-ujson/python-ujson.hash +++ b/package/python-ujson/python-ujson.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/ujson/json -md5 2c7ffd2bf23f6f07da3a0cbf5ff5c2f0 ujson-5.2.0.tar.gz -sha256 163191b88842d874e081707d35de2e205e0e396e70fd068d1038879bca8b17ad ujson-5.2.0.tar.gz +md5 73b42e3f4bf3130073cfffbd82608275 ujson-5.5.0.tar.gz +sha256 b25077a971c7da47bd6846a912a747f6963776d90720c88603b1b55d81790780 ujson-5.5.0.tar.gz # Locally computed sha256 checksums sha256 6a00a8f8b4050303368b694147bde1aed9c96bdff869c181dbbf3ccb784a1501 LICENSE.txt diff --git a/package/python-ujson/python-ujson.mk b/package/python-ujson/python-ujson.mk index 8eb5f6a0a7..95cb0ebad1 100644 --- a/package/python-ujson/python-ujson.mk +++ b/package/python-ujson/python-ujson.mk @@ -4,12 +4,16 @@ # ################################################################################ -PYTHON_UJSON_VERSION = 5.2.0 +PYTHON_UJSON_VERSION = 5.5.0 PYTHON_UJSON_SOURCE = ujson-$(PYTHON_UJSON_VERSION).tar.gz -PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/e4/fc/2dee0e78162aa1ad03dadde9a9b5c281d6f8bb0eed6810a270486d8fc041 +PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/6e/4a/03ddad85a10dd52e209993a14afa0cb0dc5c348e4647329f1c53856ad9e6 PYTHON_UJSON_SETUP_TYPE = setuptools PYTHON_UJSON_LICENSE = BSD-3-Clause PYTHON_UJSON_LICENSE_FILES = LICENSE.txt -PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm +PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm double-conversion +PYTHON_UJSON_ENV = \ + UJSON_BUILD_DC_INCLUDES="$(STAGING_DIR)/usr/include/double-conversion" \ + UJSON_BUILD_DC_LIBS="-ldouble-conversion" \ + UJSON_BUILD_NO_STRIP=1 $(eval $(python-package)) -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 07:55:11 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 09:55:11 +0200 Subject: [Buildroot] [PATCH 1/1] package/qlibc: bump to version 2.4.7 Message-ID: <20221029075511.6599-1-fontaine.fabrice@gmail.com> https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 Signed-off-by: Fabrice Fontaine --- package/qlibc/qlibc.hash | 2 +- package/qlibc/qlibc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash index 5cd6e1860f..9b2af1a4e3 100644 --- a/package/qlibc/qlibc.hash +++ b/package/qlibc/qlibc.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk index 3996bb3706..838ba68746 100644 --- a/package/qlibc/qlibc.mk +++ b/package/qlibc/qlibc.mk @@ -4,7 +4,7 @@ # ################################################################################ -QLIBC_VERSION = 2.4.6 +QLIBC_VERSION = 2.4.7 QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) QLIBC_LICENSE = BSD-2-Clause QLIBC_LICENSE_FILES = LICENSE -- 2.35.1 From bernd.kuhls at t-online.de Sat Oct 29 07:58:55 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sat, 29 Oct 2022 09:58:55 +0200 Subject: [Buildroot] [PATCH 1/1] package/samba4: security bump version to 4.15.11 Message-ID: <20221029075855.1236307-1-bernd.kuhls@t-online.de> Added patch from Gentoo to fix uClibc build: access.c:(.text+0x1e8): undefined reference to `innetgr' Release notes: https://www.samba.org/samba/history/samba-4.15.8.html https://www.samba.org/samba/history/samba-4.15.9.html o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with changing passwords. https://www.samba.org/samba/security/CVE-2022-2031.html o CVE-2022-32744: Samba AD users can forge password change requests for any user. https://www.samba.org/samba/security/CVE-2022-32744.html o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32745.html o CVE-2022-32746: Samba AD users can induce a use-after-free in the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32746.html o CVE-2022-32742: Server memory information leak via SMB1. https://www.samba.org/samba/security/CVE-2022-32742.html https://www.samba.org/samba/history/samba-4.15.10.html https://www.samba.org/samba/history/samba-4.15.11.html o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI unwrap_des() and unwrap_des3() routines of Heimdal (included in Samba). https://www.samba.org/samba/security/CVE-2022-3437.html Signed-off-by: Bernd Kuhls --- ...mba-4.16.2-fix-build-without-innetgr.patch | 34 +++++++++++++++++++ package/samba4/samba4.hash | 4 +-- package/samba4/samba4.mk | 2 +- 3 files changed, 37 insertions(+), 3 deletions(-) create mode 100644 package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch diff --git a/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch new file mode 100644 index 0000000000..b338596d7a --- /dev/null +++ b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch @@ -0,0 +1,34 @@ +# Gentoo bug 855047 + +Fixes uClibc build when uClibc was build without netgroup support. +Upstream enables netgroup support based on getdomainname() being +present: +https://github.com/samba-team/samba/commit/f179184a2be2ddd38f463fcc12252f8d24e529f8#diff-b8d1bc25b89846e70ecb61cb296a8f5c50c9a0a1b62e46790fae81aa9d5bfaaeR632 + +Downloaded from +https://gitweb.gentoo.org/repo/gentoo.git/tree/net-fs/samba/files/samba-4.16.2-fix-musl-without-innetgr.patch + +Signed-off-by: Bernd Kuhls + +--- a/lib/util/access.c ++++ b/lib/util/access.c +@@ -115,7 +115,7 @@ static bool string_match(const char *tok,const char *s) + return true; + } + } else if (tok[0] == '@') { /* netgroup: look it up */ +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + DATA_BLOB tmp; + char *mydomain = NULL; + char *hostname = NULL; +--- a/source3/auth/user_util.c ++++ b/source3/auth/user_util.c +@@ -135,7 +135,7 @@ static void store_map_in_gencache(TALLOC_CTX *ctx, const char *from, const char + + bool user_in_netgroup(TALLOC_CTX *ctx, const char *user, const char *ngname) + { +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + char nis_domain_buf[256]; + const char *nis_domain = NULL; + char *lowercase_user = NULL; diff --git a/package/samba4/samba4.hash b/package/samba4/samba4.hash index ac28c35614..f845a31290 100644 --- a/package/samba4/samba4.hash +++ b/package/samba4/samba4.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/samba/stable/samba-4.15.7.tar.asc -sha256 76d0096c16ed0265b337d5731f3c0b32eed3adab6fa8b7585c055b287cd05d6b samba-4.15.7.tar.gz +# https://download.samba.org/pub/samba/stable/samba-4.15.11.tar.asc +sha256 2f305980d49c7723cbef281fff2b81a2eeafae51e58b5172bb43d9693ef8953b samba-4.15.11.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/samba4/samba4.mk b/package/samba4/samba4.mk index c90fdd006c..814bf0bbaa 100644 --- a/package/samba4/samba4.mk +++ b/package/samba4/samba4.mk @@ -4,7 +4,7 @@ # ################################################################################ -SAMBA4_VERSION = 4.15.7 +SAMBA4_VERSION = 4.15.11 SAMBA4_SITE = https://download.samba.org/pub/samba/stable SAMBA4_SOURCE = samba-$(SAMBA4_VERSION).tar.gz SAMBA4_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:00:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:00:33 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.2 Message-ID: <20221029080033.17864-1-fontaine.fabrice@gmail.com> In the case that the WOLFSSL_CALLBACKS macro is set when building wolfSSL, there is a potential heap over read of 5 bytes when handling TLS 1.3 client connections. This heap over read is limited to wolfSSL builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does not get turned on by any other build options. The macro WOLFSSL_CALLBACKS is intended for debug use only, but if having it enabled in production, users are recommended to disable WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to update their version of wolfSSL. CVE 2022-42905 https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable Signed-off-by: Fabrice Fontaine --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index 3849ffb9fc..65d77ca659 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz +sha256 49c6195462cae034efe6c86268824ba515682508a5f5199358d56a4168a82cf0 wolfssl-5.5.2.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index 95d4f47952..d9fa72ccf4 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.1 +WOLFSSL_VERSION = 5.5.2 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES -- 2.35.1 From afshin.nasser at gmail.com Sat Oct 29 08:02:29 2022 From: afshin.nasser at gmail.com (Nasser Afshin) Date: Sat, 29 Oct 2022 11:32:29 +0330 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: References: <20221025065539.4646-1-afshin.nasser@gmail.com> <20221026102255.GA602@smart-All-Series> Message-ID: <20221029080229.GA24217@smart-All-Series> Hi Yegor, On Wed, Oct 26, 2022 at 08:21:30PM +0200, Yegor Yefremov wrote: > Hi Nasser, > > On Wed, Oct 26, 2022 at 12:23 PM Nasser Afshin wrote: > > > > Hi Yegor, > > > > Thankyou for taking time to review my patch. > > > > On Tue, Oct 25, 2022 at 10:33:19AM +0200, Yegor Yefremov wrote: > > > Hi Nasser, > > > > > > On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > > > > > > > Signed-off-by: Nasser Afshin > > > > --- > > > > package/Config.in | 1 + > > > > package/python-pycrate/Config.in | 8 ++++++++ > > > > package/python-pycrate/python-pycrate.hash | 4 ++++ > > > > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ > > > > > > An entry to the DEVELOPERS file is missing. > > > > May you help me to whome this entry should refer? > > You should add yourself as a "maintainer" of the package you add. Just > look at other entries. > I have added myself as a maintainer of this package. Thankyou. > > > > > > > > > 4 files changed, 26 insertions(+) > > > > create mode 100644 package/python-pycrate/Config.in > > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > > > diff --git a/package/Config.in b/package/Config.in > > > > index 56b1a08d8b..2443b7bb27 100644 > > > > --- a/package/Config.in > > > > +++ b/package/Config.in > > > > @@ -951,6 +951,7 @@ menu "External python modules" > > > > source "package/python-pyasn1-modules/Config.in" > > > > source "package/python-pycli/Config.in" > > > > source "package/python-pycparser/Config.in" > > > > + source "package/python-pycrate/Config.in" > > > > source "package/python-pycrypto/Config.in" > > > > source "package/python-pycryptodomex/Config.in" > > > > source "package/python-pydal/Config.in" > > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > > new file mode 100644 > > > > index 0000000000..9e2123d4dd > > > > --- /dev/null > > > > +++ b/package/python-pycrate/Config.in > > > > @@ -0,0 +1,8 @@ > > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > > + bool "python-pycrate" > > > > + help > > > > + It provides basically a runtime for encoding and decoding data structures, > > > > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > > > > + network. > > > > + > > > > + https://github.com/P1sec/pycrate/ > > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > > new file mode 100644 > > > > index 0000000000..24aa51d8e4 > > > > --- /dev/null > > > > +++ b/package/python-pycrate/python-pycrate.hash > > > > @@ -0,0 +1,4 @@ > > > > +# md5 from https://pypi.python.org/pypi/pycrate/json > > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > > +# Locally computed > > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > > new file mode 100644 > > > > index 0000000000..41ce6c18f2 > > > > --- /dev/null > > > > +++ b/package/python-pycrate/python-pycrate.mk > > > > @@ -0,0 +1,13 @@ > > > > +################################################################################ > > > > +# > > > > +# python-pycrate > > > > +# > > > > +################################################################################ > > > > + > > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > > +PYTHON_PYCRATE_SETUP_TYPE = distutils > > > > > > SETUP_TYPE is setuptools. > > > > > > Have you tried this command? > > > > > > ./utils/scanpypi pycrate > > > > > > It will do almost everything you need. The thing that is missing is > > > licensing info because there is no license file in the source archive. > > > > Thankyou for pointing this out. Now I send a new version, using this > > command and also adding licensing info. > > > > > > Best regards, > > > Yegor > > > > > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > > > > + > > > > +$(eval $(python-package)) > > > > -- > > > > 2.17.1 > > > > > > > > This is the second version of my patch. > > > > From 979beabd86f1c15d159e37136bc9591fb39b844e Mon Sep 17 00:00:00 2001 > > From: Nasser Afshin > > Date: Tue, 25 Oct 2022 16:06:53 +0330 > > Subject: [PATCH v2] python-pycrate: new package > > > > Signed-off-by: Nasser Afshin > > --- > > v1 -> v2: Added licence file and its checksum > > Used ./utils/scanpypi pycrate tool to be consistent with > > others > > > > package/Config.in | 1 + > > package/python-pycrate/Config.in | 6 ++++++ > > package/python-pycrate/python-pycrate.hash | 6 ++++++ > > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > > 4 files changed, 27 insertions(+) > > create mode 100644 package/python-pycrate/Config.in > > create mode 100644 package/python-pycrate/python-pycrate.hash > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..a6fcc72cc8 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -1168,6 +1168,7 @@ menu "External python modules" > > source "package/python-pycairo/Config.in" > > source "package/python-pycares/Config.in" > > source "package/python-pycparser/Config.in" > > + source "package/python-pycrate/Config.in" > > source "package/python-pycryptodomex/Config.in" > > source "package/python-pycups/Config.in" > > source "package/python-pydal/Config.in" > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > new file mode 100644 > > index 0000000000..193a973f7e > > --- /dev/null > > +++ b/package/python-pycrate/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_PYTHON_PYCRATE > > + bool "python-pycrate" > > + help > > + A software suite to handle various data formats. > > + > > + https://github.com/P1sec/pycrate/ > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > new file mode 100644 > > index 0000000000..8ad33370b4 > > --- /dev/null > > +++ b/package/python-pycrate/python-pycrate.hash > > @@ -0,0 +1,6 @@ > > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > +# Locally computed > > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > > + > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > new file mode 100644 > > index 0000000000..c0da152656 > > --- /dev/null > > +++ b/package/python-pycrate/python-pycrate.mk > > @@ -0,0 +1,14 @@ > > +################################################################################ > > +# > > +# python-pycrate > > +# > > +################################################################################ > > + > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > > + > > +$(eval $(python-package)) > > The patch looks good now. Thanks. > > Best regards, > Yegor This is the third version of the patch: >From de6e28885836a6d9a5347a083a68055098508583 Mon Sep 17 00:00:00 2001 From: Nasser Afshin Date: Tue, 25 Oct 2022 16:06:53 +0330 Subject: [PATCH v3] python-pycrate: new package Signed-off-by: Nasser Afshin --- v1 -> v2: Added licence file and its checksum Used ./utils/scanpypi pycrate tool to be consistent with others v2 -> v3: Added myself as the maintainer of this package DEVELOPERS | 3 +++ package/Config.in | 1 + package/python-pycrate/Config.in | 6 ++++++ package/python-pycrate/python-pycrate.hash | 6 ++++++ package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ 5 files changed, 30 insertions(+) create mode 100644 package/python-pycrate/Config.in create mode 100644 package/python-pycrate/python-pycrate.hash create mode 100644 package/python-pycrate/python-pycrate.mk diff --git a/DEVELOPERS b/DEVELOPERS index 6e0b765ba1..a1b48fd45c 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2157,6 +2157,9 @@ N: Murat Demirten F: package/jpeg-turbo/ F: package/libgeotiff/ +N: Nasser Afshin +F: package/python-pycrate/ + N: Nathaniel Roach F: package/bandwidthd/ F: package/libgudev/ diff --git a/package/Config.in b/package/Config.in index e3a34d6e97..a6fcc72cc8 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1168,6 +1168,7 @@ menu "External python modules" source "package/python-pycairo/Config.in" source "package/python-pycares/Config.in" source "package/python-pycparser/Config.in" + source "package/python-pycrate/Config.in" source "package/python-pycryptodomex/Config.in" source "package/python-pycups/Config.in" source "package/python-pydal/Config.in" diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in new file mode 100644 index 0000000000..193a973f7e --- /dev/null +++ b/package/python-pycrate/Config.in @@ -0,0 +1,6 @@ +config BR2_PACKAGE_PYTHON_PYCRATE + bool "python-pycrate" + help + A software suite to handle various data formats. + + https://github.com/P1sec/pycrate/ diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash new file mode 100644 index 0000000000..8ad33370b4 --- /dev/null +++ b/package/python-pycrate/python-pycrate.hash @@ -0,0 +1,6 @@ +# md5, sha256 from https://pypi.org/pypi/pycrate/json +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz +# Locally computed +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt + diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk new file mode 100644 index 0000000000..c0da152656 --- /dev/null +++ b/package/python-pycrate/python-pycrate.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pycrate +# +################################################################################ + +PYTHON_PYCRATE_VERSION = 0.5.5 +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df +PYTHON_PYCRATE_SETUP_TYPE = setuptools +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ + +$(eval $(python-package)) -- 2.17.1 From bernd.kuhls at t-online.de Sat Oct 29 08:08:21 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sat, 29 Oct 2022 10:08:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/fetchmail: bump version to 6.4.34 Message-ID: <20221029080821.1334194-1-bernd.kuhls@t-online.de> Switched _SITE to https. Removed patch which was applied upstream: https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 Release notes: https://sourceforge.net/p/fetchmail/mailman/message/37721221/ https://sourceforge.net/p/fetchmail/mailman/message/37699234/ https://sourceforge.net/p/fetchmail/mailman/message/37687601/ https://sourceforge.net/p/fetchmail/mailman/message/37681775/ https://sourceforge.net/p/fetchmail/mailman/message/37645690/ Signed-off-by: Bernd Kuhls --- ...c-fix-cross-compilation-with-openssl.patch | 56 ------------------- package/fetchmail/fetchmail.hash | 4 +- package/fetchmail/fetchmail.mk | 6 +- 3 files changed, 4 insertions(+), 62 deletions(-) delete mode 100644 package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch diff --git a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch b/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch deleted file mode 100644 index fff848196a..0000000000 --- a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 262aa59c1a7a7100e1dd4e73a6d0112d9becc701 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 1 Apr 2022 19:23:06 +0200 -Subject: [PATCH] configure.ac: fix cross-compilation with openssl - -Don't call AC_LIB_LINKFLAGS when the libraries are retrieved through -pkg-config to avoid the following build failure when cross-compiling -raised since commit 77503f545d2806d07ab83c59ed9a96f435d281da: - -/home/autobuild/autobuild/instance-5/output-1/host/bin/arc-buildroot-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -I/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include -I/usr/kerberos/include -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib -o fetchmail socket.o getpass.o fetchmail.o env.o idle.o options.o daemon.o driver.o transact.o sink.o smtp.o idlist.o uid.o mxget.o md5ify.o cram.o gssapi.o opie.o interface.o netrc.o unmime.o conf.o checkalias.o uid_db.o lock.o rcfile_l.o rcfile_y.o ucs/norm_charmap.o fm_realpath.o pop3.o imap.o etrn.o odmr.o libfm.a strlcpy.o strlcat.o /usr/lib/libssl.so /usr/lib/libcrypto.so -/usr/lib/libssl.so: file not recognized: file format not recognized - -This build failure is raised because AC_LIB_LINKFLAGS will override the -pkg-config target libraries by the host openssl libraries: - -configure: Enabling OpenSSL support in /home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr. -configure: SSL-check: trying pkg-config for openssl -checking for SSL... yes -checking how to link with libssl... /usr/lib/libssl.so /usr/lib/libcrypto.so -configure: From pkg-config: Adding /usr/lib/libssl.so /usr/lib/libcrypto.so to LIBS. LDFLAGS= -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib - -Fixes: - - http://autobuild.buildroot.org/results/815f18f25017be178d478458c48712d9a8570d5a - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.com/fetchmail/fetchmail/-/merge_requests/42] ---- - configure.ac | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/configure.ac b/configure.ac -index bd042d51..80e5bf91 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -838,15 +838,13 @@ else - PKG_CHECK_MODULES([SSL],[$i],[ - set -- $SSL_LIBS - while test $# -ge 1 ; do -- case $1 in -l*|lib*) : ;; -+ case $1 in -l*|lib*) LIBS="$LIBS $1" ;; - *) LDFLAGS="$LDFLAGS $1" ;; - esac - shift - done - CPPFLAGS="$SSL_CFLAGS $CPPFLAGS" -- AC_LIB_LINKFLAGS([ssl], [crypto]) -- AS_MESSAGE([From pkg-config: Adding $LIBSSL to LIBS. LDFLAGS=$LDFLAGS]) -- LIBS="$LIBS $LIBSSL" -+ AS_MESSAGE([From pkg-config: $SSL_LIBS]) - found=1 - break],[: ignore-error]) - done --- -2.35.1 - diff --git a/package/fetchmail/fetchmail.hash b/package/fetchmail/fetchmail.hash index 5ff129b9a8..4b2cf90ed8 100644 --- a/package/fetchmail/fetchmail.hash +++ b/package/fetchmail/fetchmail.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/p/fetchmail/mailman/message/37628013/ -sha256 397df984082abae51edec6831700d68636f0e117cfaffcbdd3eed66d04b97321 fetchmail-6.4.29.tar.xz +# From https://sourceforge.net/p/fetchmail/mailman/message/37721221/ +sha256 c3bdded1b5ce236960bd1ceeee3f3257220ed99c3eec84a5d76bb5618e3258d4 fetchmail-6.4.34.tar.xz # Locally computed: sha256 6d87443b61041067a5eddb2cabf8aebff15b8b40771ad6b5e4754e607ec21b39 COPYING diff --git a/package/fetchmail/fetchmail.mk b/package/fetchmail/fetchmail.mk index 25dfcae87b..063e41b2e1 100644 --- a/package/fetchmail/fetchmail.mk +++ b/package/fetchmail/fetchmail.mk @@ -5,15 +5,13 @@ ################################################################################ FETCHMAIL_VERSION_MAJOR = 6.4 -FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).29 +FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).34 FETCHMAIL_SOURCE = fetchmail-$(FETCHMAIL_VERSION).tar.xz -FETCHMAIL_SITE = http://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) +FETCHMAIL_SITE = https://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) FETCHMAIL_LICENSE = GPL-2.0; some exceptions are mentioned in COPYING FETCHMAIL_LICENSE_FILES = COPYING FETCHMAIL_CPE_ID_VENDOR = fetchmail FETCHMAIL_SELINUX_MODULES = fetchmail mta -# We're patching configure.ac -FETCHMAIL_AUTORECONF = YES FETCHMAIL_CONF_OPTS = \ --with-ssl=$(STAGING_DIR)/usr -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:13:07 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:13:07 +0200 Subject: [Buildroot] [PATCH 1/1] package/zsh: security bump to version 5.9 Message-ID: <20221029081307.36714-1-fontaine.fabrice@gmail.com> Security and bug fix release with several feature additions. https://zsh.sourceforge.io/releases.html Signed-off-by: Fabrice Fontaine --- package/zsh/zsh.hash | 2 +- package/zsh/zsh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/zsh/zsh.hash b/package/zsh/zsh.hash index 5c661ded25..e04aa388d3 100644 --- a/package/zsh/zsh.hash +++ b/package/zsh/zsh.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b6973520bace600b4779200269b1e5d79e5f505ac4952058c11ad5bbf0dd9919 zsh-5.8.1.tar.xz +sha256 9b8d1ecedd5b5e81fbf1918e876752a7dd948e05c1a0dba10ab863842d45acd5 zsh-5.9.tar.xz sha256 d06fdf3ef9b1ec69d6b9e170b0a9516fbad3523261ff1668bde3bfea6e0ef5f5 LICENCE diff --git a/package/zsh/zsh.mk b/package/zsh/zsh.mk index 8e6f713780..e790bf4c5e 100644 --- a/package/zsh/zsh.mk +++ b/package/zsh/zsh.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZSH_VERSION = 5.8.1 +ZSH_VERSION = 5.9 ZSH_SITE = http://www.zsh.org/pub ZSH_SOURCE = zsh-$(ZSH_VERSION).tar.xz ZSH_DEPENDENCIES = ncurses -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:25:10 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:25:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 Message-ID: <20221029082510.61178-1-fontaine.fabrice@gmail.com> https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 Signed-off-by: Fabrice Fontaine --- package/pahole/pahole.hash | 2 +- package/pahole/pahole.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pahole/pahole.hash b/package/pahole/pahole.hash index 8e5560b5e7..5610b252a3 100644 --- a/package/pahole/pahole.hash +++ b/package/pahole/pahole.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3531396c0568793ef8ca1a2fbb44ef2e1e81bdd55496a4487b83ba4d95df9d99 pahole-73383b3a39afe86b22e098773e47b8546c48a649.tar.gz +sha256 eeb88a62c3aaa1f4c389117b7e7cc08a49acc8a0e7f165f76dd9c5ab9af2c266 pahole-1.24.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pahole/pahole.mk b/package/pahole/pahole.mk index 199fa8cc11..82bba2f777 100644 --- a/package/pahole/pahole.mk +++ b/package/pahole/pahole.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHOLE_VERSION = 73383b3a39afe86b22e098773e47b8546c48a649 +PAHOLE_VERSION = 1.24 PAHOLE_SITE = https://git.kernel.org/pub/scm/devel/pahole/pahole.git/snapshot HOST_PAHOLE_DEPENDENCIES = \ host-elfutils \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:31:30 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:31:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/openipmi: bump to version 2.0.33 Message-ID: <20221029083130.77419-1-fontaine.fabrice@gmail.com> Drop patch (already in version) and so also drop autoreconf Signed-off-by: Fabrice Fontaine --- ...01-Avoid-searching-host-library-path.patch | 53 ------------------- package/openipmi/openipmi.hash | 6 +-- package/openipmi/openipmi.mk | 4 +- 3 files changed, 4 insertions(+), 59 deletions(-) delete mode 100644 package/openipmi/0001-Avoid-searching-host-library-path.patch diff --git a/package/openipmi/0001-Avoid-searching-host-library-path.patch b/package/openipmi/0001-Avoid-searching-host-library-path.patch deleted file mode 100644 index 15b4510f67..0000000000 --- a/package/openipmi/0001-Avoid-searching-host-library-path.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Wed, 22 Jul 2015 07:04:33 +0300 -Subject: [PATCH] Avoid searching host library path - -The $(libdir) variable points to the location of the directory on the target -system, /usr/lib by default. When cross compiling this directory contains the -host libraries which may be different than target libraries. Don't use -$(libdir) in the library search path. - -Signed-off-by: Baruch Siach -Signed-off-by: Joel Stanley -[Fabrice: refresh patch for 2.0.32] -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/35] ---- - cmdlang/Makefile.am | 3 +-- - unix/Makefile.am | 6 ++---- - 2 files changed, 3 insertions(+), 6 deletions(-) - -diff --git a/cmdlang/Makefile.am b/cmdlang/Makefile.am -index 264ee12be79f..0b3843784656 100644 ---- a/cmdlang/Makefile.am -+++ b/cmdlang/Makefile.am -@@ -15,7 +15,7 @@ libOpenIPMIcmdlang_la_SOURCES = cmdlang.c cmd_domain.c cmd_entity.c cmd_mc.c \ - $(top_builddir)/utils/libOpenIPMIutils.la \ - $(top_builddir)/lib/libOpenIPMI.la - libOpenIPMIcmdlang_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - bin_PROGRAMS = openipmish - -diff --git a/unix/Makefile.am b/unix/Makefile.am -index 5128839dad13..bd0f897ba8d6 100644 ---- a/unix/Makefile.am -+++ b/unix/Makefile.am -@@ -10,12 +10,12 @@ lib_LTLIBRARIES = libOpenIPMIposix.la libOpenIPMIpthread.la - libOpenIPMIpthread_la_LIBADD = -lpthread $(GDBM_LIB) \ - $(top_builddir)/utils/libOpenIPMIutils.la $(RT_LIB) - libOpenIPMIpthread_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - libOpenIPMIposix_la_SOURCES = posix_os_hnd.c selector.c - libOpenIPMIposix_la_LIBADD = $(top_builddir)/utils/libOpenIPMIutils.la \ - $(GDBM_LIB) $(RT_LIB) - libOpenIPMIposix_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - noinst_HEADERS = heap.h - diff --git a/package/openipmi/openipmi.hash b/package/openipmi/openipmi.hash index eded076ade..fc3cf1a520 100644 --- a/package/openipmi/openipmi.hash +++ b/package/openipmi/openipmi.hash @@ -1,8 +1,8 @@ # From http://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library/ -sha1 73d7dce4312b006983b11367e4a43d4ec52cf888 OpenIPMI-2.0.32.tar.gz -md5 532404c9df7d0e8bde975b95b9e6775b OpenIPMI-2.0.32.tar.gz +sha1 4387f227aad92756e296d1c9421e83231d355dbd OpenIPMI-2.0.33.tar.gz +md5 923d2914dbbc3307712f8c58401bab0f OpenIPMI-2.0.33.tar.gz # Locally computed -sha256 f6d0fd4c0a74b05f80907229d0b270f54ca23294bcc11979f8b8d12766786945 OpenIPMI-2.0.32.tar.gz +sha256 fb53e9ea5e2681cf8af7cda024b1a0044c675f84116ca27ae9616c8b7ad95b49 OpenIPMI-2.0.33.tar.gz sha256 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670 COPYING sha256 185323a62589e7ee80f86bf2ea29caad9a09fdda0ea3f1c00db8b778c7edf60e COPYING.BSD sha256 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509 COPYING.LIB diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index 81492ec131..ccf86f93cd 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -4,15 +4,13 @@ # ################################################################################ -OPENIPMI_VERSION = 2.0.32 +OPENIPMI_VERSION = 2.0.33 OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf OPENIPMI_INSTALL_STAGING = YES -# Patching Makefile.am -OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ --with-glib=no \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:44:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:44:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/numactl: use official license files Message-ID: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Use official license files available since version 2.0.13 and https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 Signed-off-by: Fabrice Fontaine --- package/numactl/numactl.hash | 3 ++- package/numactl/numactl.mk | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index 802175d360..a261eab9d0 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,3 +1,4 @@ # Locally calculated sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..6ff94091e9 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -7,7 +7,7 @@ NUMACTL_VERSION = 2.0.14 NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) -NUMACTL_LICENSE_FILES = README.md +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:44:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:44:55 +0200 Subject: [Buildroot] [PATCH 2/2] package/numactl: bump to version 2.0.16 In-Reply-To: <20221029084455.97704-1-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Message-ID: <20221029084455.97704-2-fontaine.fabrice@gmail.com> - Drop patches (already in version) - Use official tarball and so drop autoreconf https://github.com/numactl/numactl/releases/tag/v2.0.15 https://github.com/numactl/numactl/releases/tag/v2.0.16 Signed-off-by: Fabrice Fontaine --- ...0001-Do-not-stringify-SYMVER-symbols.patch | 25 --------- .../0002-link-with-latomic-if-needed.patch | 52 ------------------- package/numactl/numactl.hash | 2 +- package/numactl/numactl.mk | 6 +-- 4 files changed, 4 insertions(+), 81 deletions(-) delete mode 100644 package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch delete mode 100644 package/numactl/0002-link-with-latomic-if-needed.patch diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch deleted file mode 100644 index c6981aaf73..0000000000 --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 -From: Scott McMillan -Date: Fri, 9 Oct 2020 08:56:52 -0500 -Subject: [PATCH] Do not stringify SYMVER symbols - -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a -Signed-off-by: Thomas Petazzoni ---- - util.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/util.h b/util.h -index 99ada33..f2a20ac 100644 ---- a/util.h -+++ b/util.h -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); - #if HAVE_ATTRIBUTE_SYMVER - #define SYMVER(a,b) __attribute__ ((symver (b))) - #else --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); -+#define SYMVER(a,b) __asm__ (".symver " a "," b); - #endif --- -2.30.2 - diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch deleted file mode 100644 index 6dff0cb233..0000000000 --- a/package/numactl/0002-link-with-latomic-if-needed.patch +++ /dev/null @@ -1,52 +0,0 @@ -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 6 May 2021 23:08:36 +0200 -Subject: [PATCH] link with -latomic if needed - -numactl unconditionally uses __atomic_fetch_and but some architectures -(e.g. sparc) needs to link with -latomic to be able to use it. So check -if -latomic is needed and update numa.pc accordingly - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] ---- - Makefile.am | 1 + - configure.ac | 2 ++ - numa.pc.in | 1 + - 3 files changed, 4 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index 44d0d76..34f6815 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -151,6 +151,7 @@ SED_PROCESS = \ - -e 's, at exec_prefix\@,$(exec_prefix),g' \ - -e 's, at libdir\@,$(libdir),g' \ - -e 's, at includedir\@,$(includedir),g' \ -+ -e 's, at LIBS\@,$(LIBS),g' \ - < $< > $@ || rm $@ - - %.pc: %.pc.in Makefile -diff --git a/configure.ac b/configure.ac -index 659a765..e3b0eb3 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) - - AC_CONFIG_FILES([Makefile]) - -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) -+ - # GCC tries to be "helpful" and only issue a warning for unrecognized - # attributes. So we compile the test with Werror, so that if the - # attribute is not recognized the compilation fails -diff --git a/numa.pc.in b/numa.pc.in -index 8a0f202..cc04d50 100644 ---- a/numa.pc.in -+++ b/numa.pc.in -@@ -8,3 +8,4 @@ Description: NUMA policy library - Version: @VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lnuma -+Libs.Private: @LIBS@ diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index a261eab9d0..757001b750 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index 6ff94091e9..b2f349255f 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -4,12 +4,12 @@ # ################################################################################ -NUMACTL_VERSION = 2.0.14 -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) +NUMACTL_VERSION = 2.0.16 +NUMACTL_SITE = \ + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES -NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" $(eval $(autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 08:56:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 10:56:22 +0200 Subject: [Buildroot] [PATCH 1/1] package/ndisc6: bump to version 1.0.6 Message-ID: <20221029085622.104382-1-fontaine.fabrice@gmail.com> ndisc6: print NAT64 prefix if present. rdnssd: fix timeout calculation. https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 Signed-off-by: Fabrice Fontaine --- package/ndisc6/ndisc6.hash | 2 +- package/ndisc6/ndisc6.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash index d76e831208..e258382c53 100644 --- a/package/ndisc6/ndisc6.hash +++ b/package/ndisc6/ndisc6.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 # Locally computed sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk index ff6439e310..23734ca7d7 100644 --- a/package/ndisc6/ndisc6.mk +++ b/package/ndisc6/ndisc6.mk @@ -4,7 +4,7 @@ # ################################################################################ -NDISC6_VERSION = 1.0.5 +NDISC6_VERSION = 1.0.6 NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 NDISC6_SITE = http://www.remlab.net/files/ndisc6 NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:25:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:25:17 +0200 Subject: [Buildroot] [PATCH 1/1] package/mxml: bump to version 3.3.1 Message-ID: <20221029092517.115919-1-fontaine.fabrice@gmail.com> Update hash of NOTICE (update in year: https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 Signed-off-by: Fabrice Fontaine --- package/mxml/mxml.hash | 4 ++-- package/mxml/mxml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash index 38056f4c3a..412977dff0 100644 --- a/package/mxml/mxml.hash +++ b/package/mxml/mxml.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk index 88d35cb7ee..d224cf5308 100644 --- a/package/mxml/mxml.mk +++ b/package/mxml/mxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -MXML_VERSION = 3.3 +MXML_VERSION = 3.3.1 MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) MXML_LICENSE = Apache-2.0 with exceptions MXML_LICENSE_FILES = LICENSE NOTICE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:39:47 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:39:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/mtr: bump to version 0.95 Message-ID: <20221029093947.124529-1-fontaine.fabrice@gmail.com> https://github.com/traviscross/mtr/blob/v0.95/NEWS Signed-off-by: Fabrice Fontaine --- package/mtr/mtr.hash | 2 +- package/mtr/mtr.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash index d6062ef08f..399799f49e 100644 --- a/package/mtr/mtr.hash +++ b/package/mtr/mtr.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk index 07c58a1e93..d3e3b1a97a 100644 --- a/package/mtr/mtr.mk +++ b/package/mtr/mtr.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTR_VERSION = 0.94 +MTR_VERSION = 0.95 MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) MTR_AUTORECONF = YES MTR_DEPENDENCIES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 09:45:35 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 11:45:35 +0200 Subject: [Buildroot] [PATCH 1/1] package/mtd: bump to version 2.1.5 Message-ID: <20221029094535.133025-1-fontaine.fabrice@gmail.com> https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html Signed-off-by: Fabrice Fontaine --- package/mtd/mtd.hash | 4 ++-- package/mtd/mtd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash index 481788f844..a2133e3ce2 100644 --- a/package/mtd/mtd.hash +++ b/package/mtd/mtd.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk index 45e7c0c61c..6e266a8760 100644 --- a/package/mtd/mtd.mk +++ b/package/mtd/mtd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTD_VERSION = 2.1.3 +MTD_VERSION = 2.1.5 MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils MTD_LICENSE = GPL-2.0 -- 2.35.1 From glex.spb at gmail.com Sat Oct 29 11:09:42 2022 From: glex.spb at gmail.com (Gleb Mazovetskiy) Date: Sat, 29 Oct 2022 12:09:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: unset CMAKE_GENERATOR vars Message-ID: <20221029110943.155259-1-glex.spb@gmail.com> If the user environment defines `CMAKE_GENERATOR` (e.g. `CMAKE_GENERATOR=Ninja`), buildroot would previously fail to build cmake packages because buildroot uses `make` explicitly (as opposed to `cmake --build`). Unsets all the `CMAKE_GENERATOR*` variables before configuring a cmake package. Signed-off-by: Gleb Mazovetskiy --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..96b2579cc5 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -86,6 +86,7 @@ define $(2)_CONFIGURE_CMDS (mkdir -p $$($$(PKG)_BUILDDIR) && \ cd $$($$(PKG)_BUILDDIR) && \ rm -f CMakeCache.txt && \ + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ @@ -111,6 +112,7 @@ define $(2)_CONFIGURE_CMDS (mkdir -p $$($$(PKG)_BUILDDIR) && \ cd $$($$(PKG)_BUILDDIR) && \ rm -f CMakeCache.txt && \ + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ PATH=$$(BR_PATH) \ PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \ PKG_CONFIG_SYSROOT_DIR="/" \ -- 2.34.1 From ju.o at free.fr Sat Oct 29 11:53:21 2022 From: ju.o at free.fr (Julien Olivain) Date: Sat, 29 Oct 2022 13:53:21 +0200 Subject: [Buildroot] [PATCH 1/1] package/tinycompress: new package Message-ID: <20221029115321.718694-1-ju.o@free.fr> tinycompress is a library for compress audio offload in alsa. It also contains the "cplay" and "crecord" programs. tinycompress is part of the ALSA project. https://www.alsa-project.org/ Signed-off-by: Julien Olivain --- Tested on master branch, commit 014ec19 with commands: make check-package ... 0 warnings generated ./utils/test-pkg -a -p tinycompress ... 44 builds, 3 skipped, 1 build failed, 0 legal-info failed, 0 show-info failed Note: The build failure is not related to this package. It is related to the toolchain "bootlin-xtensa-uclibc" for which a fix was proposed in: https://patchwork.ozlabs.org/project/buildroot/patch/20221010030937.6432-1-ju.o at free.fr/ --- DEVELOPERS | 1 + package/Config.in | 1 + ...-add-time.h-missing-header-inclusion.patch | 39 +++++++++++++++++++ package/tinycompress/Config.in | 10 +++++ package/tinycompress/tinycompress.hash | 5 +++ package/tinycompress/tinycompress.mk | 13 +++++++ 6 files changed, 69 insertions(+) create mode 100644 package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch create mode 100644 package/tinycompress/Config.in create mode 100644 package/tinycompress/tinycompress.hash create mode 100644 package/tinycompress/tinycompress.mk diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..df6b3f7b42 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1684,6 +1684,7 @@ F: package/python-distro/ F: package/python-gnupg/ F: package/python-pyalsa/ F: package/riscv-isa-sim/ +F: package/tinycompress/ F: package/zynaddsubfx/ F: support/testing/tests/package/sample_python_distro.py F: support/testing/tests/package/sample_python_gnupg.py diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..d691471877 100644 --- a/package/Config.in +++ b/package/Config.in @@ -52,6 +52,7 @@ menu "Audio and video applications" source "package/pulseaudio/Config.in" source "package/sox/Config.in" source "package/squeezelite/Config.in" + source "package/tinycompress/Config.in" source "package/tovid/Config.in" source "package/tstools/Config.in" source "package/twolame/Config.in" diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch new file mode 100644 index 0000000000..4068a54074 --- /dev/null +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch @@ -0,0 +1,39 @@ +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 +From: Julien Olivain +Date: Sat, 29 Oct 2022 12:51:17 +0200 +Subject: [PATCH] wave: add missing header inclusion + +When compiling tinycompress with some libc other than glibc +(e.g. musl libc), compilation fails with the following error: + + In file included from wave.c:11:0: + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ + [...] + +According to POSIX, "struct timespec" is defined in . See: +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html + +This patch fixes this build failure by including prior +. + +Signed-off-by: Julien Olivain +--- + src/utils/wave.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/utils/wave.c b/src/utils/wave.c +index a74149a..d17f66a 100644 +--- a/src/utils/wave.c ++++ b/src/utils/wave.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + + #include "tinycompress/tinywave.h" +-- +2.38.1 + diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in new file mode 100644 index 0000000000..aff1943c78 --- /dev/null +++ b/package/tinycompress/Config.in @@ -0,0 +1,10 @@ +config BR2_PACKAGE_TINYCOMPRESS + bool "tinycompress" + depends on !BR2_STATIC_LIBS # dlfcn.h + help + tinycompress is a library for compress audio offload in alsa. + + https://www.alsa-project.org/ + +comment "tinycompress needs a toolchain w/ dynamic library" + depends on BR2_STATIC_LIBS diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash new file mode 100644 index 0000000000..164f3a36c3 --- /dev/null +++ b/package/tinycompress/tinycompress.hash @@ -0,0 +1,5 @@ +# Locally calculated after checking pgp signature +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 + +# Locally calculated +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk new file mode 100644 index 0000000000..062233ec80 --- /dev/null +++ b/package/tinycompress/tinycompress.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# tinycompress +# +################################################################################ + +TINYCOMPRESS_VERSION = 1.2.8 +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 +TINYCOMPRESS_LICENSE_FILES = COPYING + +$(eval $(autotools-package)) -- 2.38.1 From fontaine.fabrice at gmail.com Sat Oct 29 11:55:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 13:55:54 +0200 Subject: [Buildroot] [PATCH 1/2] package/dahdi-linux: bump to version 3.2.0 Message-ID: <20221029115555.789814-1-fontaine.fabrice@gmail.com> - Use official tarball - This bump will fix the following build failures with kernel >= 5.16: /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: fatal error: stdbool.h: No such file or directory 45 | #include | ^~~~~~~~~~~ [...] ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ?xbus_read_proc_open?: ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: error: implicit declaration of function ?PDE_DATA?; did you mean ?NODE_DATA?? [-Werror=implicit-function-declaration] 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); | ^~~~~~~~ | NODE_DATA https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 Fixes: - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 Signed-off-by: Fabrice Fontaine --- package/dahdi-linux/dahdi-linux.hash | 4 ++-- package/dahdi-linux/dahdi-linux.mk | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/dahdi-linux/dahdi-linux.hash b/package/dahdi-linux/dahdi-linux.hash index 7a4c688061..2d3f336777 100644 --- a/package/dahdi-linux/dahdi-linux.hash +++ b/package/dahdi-linux/dahdi-linux.hash @@ -1,5 +1,5 @@ -# Locally computed -sha256 3faf127ee3f1fad0195c56d00b7bf2708ec8a54bf3c31edd827fd9beb47e0a51 dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8-br1.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases/dahdi-linux-3.2.0.sha256 +sha256 e2ef9b3f6769f60f432cfa09c39c9a0d7ab5bddff59229f385056915c65f9f13 dahdi-linux-3.2.0.tar.gz # Firmware files have no upstream hash, so sha56 locally computed sha256 3ff26cf80555fd7470b43a87c51d03c1db2a75abcd4561d79f69b6c48298e4a1 dahdi-fwload-vpmadt032-1.25.0.tar.gz diff --git a/package/dahdi-linux/dahdi-linux.mk b/package/dahdi-linux/dahdi-linux.mk index 93124f0e02..88519b5106 100644 --- a/package/dahdi-linux/dahdi-linux.mk +++ b/package/dahdi-linux/dahdi-linux.mk @@ -4,9 +4,9 @@ # ################################################################################ -DAHDI_LINUX_VERSION = 5c840cf43838e0690873e73409491c392333b3b8 -DAHDI_LINUX_SITE = https://gerrit.asterisk.org/dahdi-linux -DAHDI_LINUX_SITE_METHOD = git +DAHDI_LINUX_VERSION = 3.2.0 +DAHDI_LINUX_SITE = \ + http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases # We need to download all those firmware blobs ourselves, otherwise # dahdi-linux will try to download them at install time. -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 11:55:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 13:55:55 +0200 Subject: [Buildroot] [PATCH 2/2] package/dahdi-tools: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-1-fontaine.fabrice@gmail.com> References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> Message-ID: <20221029115555.789814-2-fontaine.fabrice@gmail.com> https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 Signed-off-by: Fabrice Fontaine --- package/dahdi-tools/dahdi-tools.hash | 6 ++---- package/dahdi-tools/dahdi-tools.mk | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/dahdi-tools/dahdi-tools.hash b/package/dahdi-tools/dahdi-tools.hash index 72fa995c84..c119ff4ee1 100644 --- a/package/dahdi-tools/dahdi-tools.hash +++ b/package/dahdi-tools/dahdi-tools.hash @@ -1,7 +1,5 @@ -# sha1 from http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases -# sha256 locally computed -sha1 fff6c8fdc72a66f81768e4f50bf55156f7cebbc4 dahdi-tools-3.1.0.tar.gz -sha256 ea852ebd274ee1cc90ff5e4ac84261b0b787b1a74e8b76ad659bc9ec4f77e67e dahdi-tools-3.1.0.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases/dahdi-tools-3.2.0.sha256 +sha256 2bc269887fcd42d2486572611934d713e603734cc658b3b517fc9f3bdea7262f dahdi-tools-3.2.0.tar.gz # License files, locally computed sha256 fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7 LICENSE diff --git a/package/dahdi-tools/dahdi-tools.mk b/package/dahdi-tools/dahdi-tools.mk index fc0c591ca8..7d4de645a2 100644 --- a/package/dahdi-tools/dahdi-tools.mk +++ b/package/dahdi-tools/dahdi-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -DAHDI_TOOLS_VERSION = 3.1.0 +DAHDI_TOOLS_VERSION = 3.2.0 DAHDI_TOOLS_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases DAHDI_TOOLS_LICENSE = GPLv2, LGPLv2.1 -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 12:09:37 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 14:09:37 +0200 Subject: [Buildroot] [PATCH 1/1] package/hackrf: bump to version 2022.09.1 Message-ID: <20221029120937.820995-1-fontaine.fabrice@gmail.com> - Update site - Drop patch (already in version) https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 Signed-off-by: Fabrice Fontaine --- ...ndFFTW.cmake-fix-build-without-fftw3.patch | 34 ------------------- package/hackrf/Config.in | 2 +- package/hackrf/hackrf.hash | 2 +- package/hackrf/hackrf.mk | 4 +-- 4 files changed, 4 insertions(+), 38 deletions(-) delete mode 100644 package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch diff --git a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch b/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch deleted file mode 100644 index 2b1f34879b..0000000000 --- a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 3e32f46c7948f6b26476558905995ebec9b01760 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 15 Oct 2021 23:36:54 +0200 -Subject: [PATCH] cmake/modules/FindFFTW.cmake: fix build without fftw3 - -Build on Linux fails if libfftw3 is not available since commit -https://github.com/greatscottgadgets/hackrf/commit/a8c1fc92e9fa10843cb4aafd68c52f9903ebd05d -which replaced -pkg_check_modules(FFTW REQUIRED fftw3f) -by -find_package(FFTW REQUIRED) - -Fix this build failure by updating FindFFTW.cmake to check for fftw3f - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/greatscottgadgets/hackrf/commit/3e32f46c7948f6b26476558905995ebec9b01760] ---- - host/cmake/modules/FindFFTW.cmake | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/host/cmake/modules/FindFFTW.cmake b/host/cmake/modules/FindFFTW.cmake -index b9f3bfb81..802db4f5b 100644 ---- a/host/cmake/modules/FindFFTW.cmake -+++ b/host/cmake/modules/FindFFTW.cmake -@@ -16,7 +16,7 @@ IF (WIN32) - include_directories(${FFTW_INCLUDES}) - find_library (FFTW_LIBRARIES NAMES ${FFTW_LIBRARIES}) - ELSE(WIN32) --find_library (FFTW_LIBRARIES NAMES fftw3) -+find_library (FFTW_LIBRARIES NAMES fftw3f) - ENDIF(WIN32) - - diff --git a/package/hackrf/Config.in b/package/hackrf/Config.in index 05d01adc96..d5df328dfa 100644 --- a/package/hackrf/Config.in +++ b/package/hackrf/Config.in @@ -9,7 +9,7 @@ config BR2_PACKAGE_HACKRF help Library and tools for accessing HackRF SDR boards. - https://github.com/mossmann/hackrf/tree/master/host + https://hackrf.readthedocs.io comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ diff --git a/package/hackrf/hackrf.hash b/package/hackrf/hackrf.hash index 9053858f76..16ccb9dcfb 100644 --- a/package/hackrf/hackrf.hash +++ b/package/hackrf/hackrf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a43e5080c11efdfe69ddebcc35a02b018e30e820de0e0ebdc7948cf7b0cd93a3 hackrf-2021.03.1.tar.xz +sha256 bacd4e7937467ffa14654624444c8b5c716ab470d8c1ee8d220d2094ae2adb3e hackrf-2022.09.1.tar.xz sha256 49b60a6288f90f49074228cc1fae0fb16871ba36b756013abdf7c2fc92f01fad COPYING diff --git a/package/hackrf/hackrf.mk b/package/hackrf/hackrf.mk index c224afc332..4317da60bc 100644 --- a/package/hackrf/hackrf.mk +++ b/package/hackrf/hackrf.mk @@ -4,8 +4,8 @@ # ################################################################################ -HACKRF_VERSION = 2021.03.1 -HACKRF_SITE = https://github.com/mossmann/hackrf/releases/download/v$(HACKRF_VERSION) +HACKRF_VERSION = 2022.09.1 +HACKRF_SITE = https://github.com/greatscottgadgets/hackrf/releases/download/v$(HACKRF_VERSION) HACKRF_SOURCE = hackrf-$(HACKRF_VERSION).tar.xz HACKRF_LICENSE = GPL-2.0+, BSD-3-Clause HACKRF_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 29 12:39:03 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 06:39:03 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.7 Message-ID: <20221029123903.1422864-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..eadf300bc2 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 06d9d166b4a2d86f06ed09eeb362ac03728e1fbd2b852cc6a4ddc7cc75029237 maturin-0.13.7.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..ffbd131ef0 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.7 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/4f/19/6f982e341612ab442f90ba1a047a4188d48473ad0d1dbfb3dffdaa20e095 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit -- 2.34.1 From peter at korsgaard.com Sat Oct 29 16:06:04 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:04 +0200 Subject: [Buildroot] [PATCH 1/1] package/samba4: security bump version to 4.15.11 In-Reply-To: <20221029075855.1236307-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sat, 29 Oct 2022 09:58:55 +0200") References: <20221029075855.1236307-1-bernd.kuhls@t-online.de> Message-ID: <877d0izkb7.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Added patch from Gentoo to fix uClibc build: > access.c:(.text+0x1e8): undefined reference to `innetgr' > Release notes: > https://www.samba.org/samba/history/samba-4.15.8.html > https://www.samba.org/samba/history/samba-4.15.9.html > o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with > changing passwords. > https://www.samba.org/samba/security/CVE-2022-2031.html > o CVE-2022-32744: Samba AD users can forge password change requests for any user. > https://www.samba.org/samba/security/CVE-2022-32744.html > o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add > or modify request. > https://www.samba.org/samba/security/CVE-2022-32745.html > o CVE-2022-32746: Samba AD users can induce a use-after-free in the server > process with an LDAP add or modify request. > https://www.samba.org/samba/security/CVE-2022-32746.html > o CVE-2022-32742: Server memory information leak via SMB1. > https://www.samba.org/samba/security/CVE-2022-32742.html > https://www.samba.org/samba/history/samba-4.15.10.html > https://www.samba.org/samba/history/samba-4.15.11.html > o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI > unwrap_des() and unwrap_des3() routines of Heimdal (included > in Samba). > https://www.samba.org/samba/security/CVE-2022-3437.html > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:06:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:10 +0200 Subject: [Buildroot] [PATCH 1/1] package/wolfssl: security bump to version 5.5.2 In-Reply-To: <20221029080033.17864-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:00:33 +0200") References: <20221029080033.17864-1-fontaine.fabrice@gmail.com> Message-ID: <8735b6zkb1.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > In the case that the WOLFSSL_CALLBACKS macro is set when building > wolfSSL, there is a potential heap over read of 5 bytes when handling > TLS 1.3 client connections. This heap over read is limited to wolfSSL > builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does > not get turned on by any other build options. The macro > WOLFSSL_CALLBACKS is intended for debug use only, but if having it > enabled in production, users are recommended to disable > WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to > update their version of wolfSSL. CVE 2022-42905 > https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:03 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:03 +0200 Subject: [Buildroot] [PATCH 1/1] package/fetchmail: bump version to 6.4.34 In-Reply-To: <20221029080821.1334194-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sat, 29 Oct 2022 10:08:21 +0200") References: <20221029080821.1334194-1-bernd.kuhls@t-online.de> Message-ID: <87y1syy5p4.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Switched _SITE to https. > Removed patch which was applied upstream: > https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 > Release notes: > https://sourceforge.net/p/fetchmail/mailman/message/37721221/ > https://sourceforge.net/p/fetchmail/mailman/message/37699234/ > https://sourceforge.net/p/fetchmail/mailman/message/37687601/ > https://sourceforge.net/p/fetchmail/mailman/message/37681775/ > https://sourceforge.net/p/fetchmail/mailman/message/37645690/ > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:25 +0200 Subject: [Buildroot] [PATCH 1/1] package/zsh: security bump to version 5.9 In-Reply-To: <20221029081307.36714-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:13:07 +0200") References: <20221029081307.36714-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3my5oi.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Security and bug fix release with several feature additions. > https://zsh.sourceforge.io/releases.html > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:51 +0200 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221029082510.61178-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 10:25:10 +0200") References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> Message-ID: <87pmeay5ns.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:08:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:45 +0200 Subject: [Buildroot] [PATCH 1/2] package/dahdi-linux: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 13:55:54 +0200") References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> Message-ID: <87leoyy5ma.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - Use official tarball > - This bump will fix the following build failures with kernel >= 5.16: > /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: > fatal error: stdbool.h: No such file or directory > 45 | #include > | ^~~~~~~~~~~ > [...] > ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ?xbus_read_proc_open?: > ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: > error: implicit declaration of function ?PDE_DATA?; did you mean > ?NODE_DATA?? [-Werror=implicit-function-declaration] > 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); > | ^~~~~~~~ > | NODE_DATA > https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 > Fixes: > - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 > - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:08:50 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:50 +0200 Subject: [Buildroot] [PATCH 2/2] package/dahdi-tools: bump to version 3.2.0 In-Reply-To: <20221029115555.789814-2-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sat, 29 Oct 2022 13:55:55 +0200") References: <20221029115555.789814-1-fontaine.fabrice@gmail.com> <20221029115555.789814-2-fontaine.fabrice@gmail.com> Message-ID: <87h6zmy5m5.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:07:49 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:49 +0200 Subject: [Buildroot] [git commit] package/pahole: bump to version 1.24 Message-ID: <20221029160920.6F33E86FBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7c7b4f88bca9b1ceba6478c5c03797675b1f10e8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pahole/pahole.hash | 2 +- package/pahole/pahole.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pahole/pahole.hash b/package/pahole/pahole.hash index 8e5560b5e7..5610b252a3 100644 --- a/package/pahole/pahole.hash +++ b/package/pahole/pahole.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3531396c0568793ef8ca1a2fbb44ef2e1e81bdd55496a4487b83ba4d95df9d99 pahole-73383b3a39afe86b22e098773e47b8546c48a649.tar.gz +sha256 eeb88a62c3aaa1f4c389117b7e7cc08a49acc8a0e7f165f76dd9c5ab9af2c266 pahole-1.24.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pahole/pahole.mk b/package/pahole/pahole.mk index 199fa8cc11..82bba2f777 100644 --- a/package/pahole/pahole.mk +++ b/package/pahole/pahole.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHOLE_VERSION = 73383b3a39afe86b22e098773e47b8546c48a649 +PAHOLE_VERSION = 1.24 PAHOLE_SITE = https://git.kernel.org/pub/scm/devel/pahole/pahole.git/snapshot HOST_PAHOLE_DEPENDENCIES = \ host-elfutils \ From peter at korsgaard.com Sat Oct 29 16:05:34 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:05:34 +0200 Subject: [Buildroot] [git commit] package/samba4: security bump version to 4.15.11 Message-ID: <20221029160920.42AD686FBE@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8941d02bf1da1574b8db65a104566a080e85308b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Added patch from Gentoo to fix uClibc build: access.c:(.text+0x1e8): undefined reference to `innetgr' Release notes: https://www.samba.org/samba/history/samba-4.15.8.html https://www.samba.org/samba/history/samba-4.15.9.html o CVE-2022-2031: Samba AD users can bypass certain restrictions associated with changing passwords. https://www.samba.org/samba/security/CVE-2022-2031.html o CVE-2022-32744: Samba AD users can forge password change requests for any user. https://www.samba.org/samba/security/CVE-2022-32744.html o CVE-2022-32745: Samba AD users can crash the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32745.html o CVE-2022-32746: Samba AD users can induce a use-after-free in the server process with an LDAP add or modify request. https://www.samba.org/samba/security/CVE-2022-32746.html o CVE-2022-32742: Server memory information leak via SMB1. https://www.samba.org/samba/security/CVE-2022-32742.html https://www.samba.org/samba/history/samba-4.15.10.html https://www.samba.org/samba/history/samba-4.15.11.html o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI unwrap_des() and unwrap_des3() routines of Heimdal (included in Samba). https://www.samba.org/samba/security/CVE-2022-3437.html Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...05-samba-4.16.2-fix-build-without-innetgr.patch | 34 ++++++++++++++++++++++ package/samba4/samba4.hash | 4 +-- package/samba4/samba4.mk | 2 +- 3 files changed, 37 insertions(+), 3 deletions(-) diff --git a/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch new file mode 100644 index 0000000000..b338596d7a --- /dev/null +++ b/package/samba4/0005-samba-4.16.2-fix-build-without-innetgr.patch @@ -0,0 +1,34 @@ +# Gentoo bug 855047 + +Fixes uClibc build when uClibc was build without netgroup support. +Upstream enables netgroup support based on getdomainname() being +present: +https://github.com/samba-team/samba/commit/f179184a2be2ddd38f463fcc12252f8d24e529f8#diff-b8d1bc25b89846e70ecb61cb296a8f5c50c9a0a1b62e46790fae81aa9d5bfaaeR632 + +Downloaded from +https://gitweb.gentoo.org/repo/gentoo.git/tree/net-fs/samba/files/samba-4.16.2-fix-musl-without-innetgr.patch + +Signed-off-by: Bernd Kuhls + +--- a/lib/util/access.c ++++ b/lib/util/access.c +@@ -115,7 +115,7 @@ static bool string_match(const char *tok,const char *s) + return true; + } + } else if (tok[0] == '@') { /* netgroup: look it up */ +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + DATA_BLOB tmp; + char *mydomain = NULL; + char *hostname = NULL; +--- a/source3/auth/user_util.c ++++ b/source3/auth/user_util.c +@@ -135,7 +135,7 @@ static void store_map_in_gencache(TALLOC_CTX *ctx, const char *from, const char + + bool user_in_netgroup(TALLOC_CTX *ctx, const char *user, const char *ngname) + { +-#ifdef HAVE_NETGROUP ++#if defined(HAVE_NETGROUP) && defined(HAVE_INNETGR) + char nis_domain_buf[256]; + const char *nis_domain = NULL; + char *lowercase_user = NULL; diff --git a/package/samba4/samba4.hash b/package/samba4/samba4.hash index ac28c35614..f845a31290 100644 --- a/package/samba4/samba4.hash +++ b/package/samba4/samba4.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/samba/stable/samba-4.15.7.tar.asc -sha256 76d0096c16ed0265b337d5731f3c0b32eed3adab6fa8b7585c055b287cd05d6b samba-4.15.7.tar.gz +# https://download.samba.org/pub/samba/stable/samba-4.15.11.tar.asc +sha256 2f305980d49c7723cbef281fff2b81a2eeafae51e58b5172bb43d9693ef8953b samba-4.15.11.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/samba4/samba4.mk b/package/samba4/samba4.mk index c90fdd006c..814bf0bbaa 100644 --- a/package/samba4/samba4.mk +++ b/package/samba4/samba4.mk @@ -4,7 +4,7 @@ # ################################################################################ -SAMBA4_VERSION = 4.15.7 +SAMBA4_VERSION = 4.15.11 SAMBA4_SITE = https://download.samba.org/pub/samba/stable SAMBA4_SOURCE = samba-$(SAMBA4_VERSION).tar.gz SAMBA4_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:05:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:05:45 +0200 Subject: [Buildroot] [git commit] package/wolfssl: security bump to version 5.5.2 Message-ID: <20221029160920.4CA9586FBA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=18b5d6205db7547d633d6ac4ea8ba4fdd81ecc35 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master In the case that the WOLFSSL_CALLBACKS macro is set when building wolfSSL, there is a potential heap over read of 5 bytes when handling TLS 1.3 client connections. This heap over read is limited to wolfSSL builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does not get turned on by any other build options. The macro WOLFSSL_CALLBACKS is intended for debug use only, but if having it enabled in production, users are recommended to disable WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to update their version of wolfSSL. CVE 2022-42905 https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/wolfssl/wolfssl.hash | 2 +- package/wolfssl/wolfssl.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/wolfssl/wolfssl.hash b/package/wolfssl/wolfssl.hash index 3849ffb9fc..65d77ca659 100644 --- a/package/wolfssl/wolfssl.hash +++ b/package/wolfssl/wolfssl.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 97339e6956c90e7c881ba5c748dd04f7c30e5dbe0c06da765418c51375a6dee3 wolfssl-5.5.1.tar.gz +sha256 49c6195462cae034efe6c86268824ba515682508a5f5199358d56a4168a82cf0 wolfssl-5.5.2.tar.gz # Hash for license files: sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/wolfssl/wolfssl.mk b/package/wolfssl/wolfssl.mk index 95d4f47952..d9fa72ccf4 100644 --- a/package/wolfssl/wolfssl.mk +++ b/package/wolfssl/wolfssl.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFSSL_VERSION = 5.5.1 +WOLFSSL_VERSION = 5.5.2 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable) WOLFSSL_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:08:41 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:41 +0200 Subject: [Buildroot] [git commit] package/dahdi-tools: bump to version 3.2.0 Message-ID: <20221029160920.84DA28704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6905bbc143346aab01f747586af1ce83bc9fd2f1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/asterisk/dahdi-tools/compare/v3.1.0...v3.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dahdi-tools/dahdi-tools.hash | 6 ++---- package/dahdi-tools/dahdi-tools.mk | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/package/dahdi-tools/dahdi-tools.hash b/package/dahdi-tools/dahdi-tools.hash index 72fa995c84..c119ff4ee1 100644 --- a/package/dahdi-tools/dahdi-tools.hash +++ b/package/dahdi-tools/dahdi-tools.hash @@ -1,7 +1,5 @@ -# sha1 from http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases -# sha256 locally computed -sha1 fff6c8fdc72a66f81768e4f50bf55156f7cebbc4 dahdi-tools-3.1.0.tar.gz -sha256 ea852ebd274ee1cc90ff5e4ac84261b0b787b1a74e8b76ad659bc9ec4f77e67e dahdi-tools-3.1.0.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases/dahdi-tools-3.2.0.sha256 +sha256 2bc269887fcd42d2486572611934d713e603734cc658b3b517fc9f3bdea7262f dahdi-tools-3.2.0.tar.gz # License files, locally computed sha256 fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7 LICENSE diff --git a/package/dahdi-tools/dahdi-tools.mk b/package/dahdi-tools/dahdi-tools.mk index fc0c591ca8..7d4de645a2 100644 --- a/package/dahdi-tools/dahdi-tools.mk +++ b/package/dahdi-tools/dahdi-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -DAHDI_TOOLS_VERSION = 3.1.0 +DAHDI_TOOLS_VERSION = 3.2.0 DAHDI_TOOLS_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases DAHDI_TOOLS_LICENSE = GPLv2, LGPLv2.1 From peter at korsgaard.com Sat Oct 29 16:07:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:07:15 +0200 Subject: [Buildroot] [git commit] package/zsh: security bump to version 5.9 Message-ID: <20221029160920.6491387052@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=21531fa31a8cc49054f4af15f8556f4cb08daa7f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Security and bug fix release with several feature additions. https://zsh.sourceforge.io/releases.html Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/zsh/zsh.hash | 2 +- package/zsh/zsh.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/zsh/zsh.hash b/package/zsh/zsh.hash index 5c661ded25..e04aa388d3 100644 --- a/package/zsh/zsh.hash +++ b/package/zsh/zsh.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b6973520bace600b4779200269b1e5d79e5f505ac4952058c11ad5bbf0dd9919 zsh-5.8.1.tar.xz +sha256 9b8d1ecedd5b5e81fbf1918e876752a7dd948e05c1a0dba10ab863842d45acd5 zsh-5.9.tar.xz sha256 d06fdf3ef9b1ec69d6b9e170b0a9516fbad3523261ff1668bde3bfea6e0ef5f5 LICENCE diff --git a/package/zsh/zsh.mk b/package/zsh/zsh.mk index 8e6f713780..e790bf4c5e 100644 --- a/package/zsh/zsh.mk +++ b/package/zsh/zsh.mk @@ -4,7 +4,7 @@ # ################################################################################ -ZSH_VERSION = 5.8.1 +ZSH_VERSION = 5.9 ZSH_SITE = http://www.zsh.org/pub ZSH_SOURCE = zsh-$(ZSH_VERSION).tar.xz ZSH_DEPENDENCIES = ncurses From peter at korsgaard.com Sat Oct 29 16:08:18 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:08:18 +0200 Subject: [Buildroot] [git commit] package/dahdi-linux: bump to version 3.2.0 Message-ID: <20221029160920.7A7D986FBA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6cbfed0dbf43c5e04e3cc543b642e3c996bfed97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Use official tarball - This bump will fix the following build failures with kernel >= 5.16: /home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: fatal error: stdbool.h: No such file or directory 45 | #include | ^~~~~~~~~~~ [...] ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ???xbus_read_proc_open???: ../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: error: implicit declaration of function ???PDE_DATA???; did you mean ???NODE_DATA???? [-Werror=implicit-function-declaration] 1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode)); | ^~~~~~~~ | NODE_DATA https://github.com/asterisk/dahdi-linux/compare/5c840cf43838e0690873e73409491c392333b3b8...v3.2.0 Fixes: - http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 - http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/dahdi-linux/dahdi-linux.hash | 4 ++-- package/dahdi-linux/dahdi-linux.mk | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/dahdi-linux/dahdi-linux.hash b/package/dahdi-linux/dahdi-linux.hash index 7a4c688061..2d3f336777 100644 --- a/package/dahdi-linux/dahdi-linux.hash +++ b/package/dahdi-linux/dahdi-linux.hash @@ -1,5 +1,5 @@ -# Locally computed -sha256 3faf127ee3f1fad0195c56d00b7bf2708ec8a54bf3c31edd827fd9beb47e0a51 dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8-br1.tar.gz +# From http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases/dahdi-linux-3.2.0.sha256 +sha256 e2ef9b3f6769f60f432cfa09c39c9a0d7ab5bddff59229f385056915c65f9f13 dahdi-linux-3.2.0.tar.gz # Firmware files have no upstream hash, so sha56 locally computed sha256 3ff26cf80555fd7470b43a87c51d03c1db2a75abcd4561d79f69b6c48298e4a1 dahdi-fwload-vpmadt032-1.25.0.tar.gz diff --git a/package/dahdi-linux/dahdi-linux.mk b/package/dahdi-linux/dahdi-linux.mk index 93124f0e02..88519b5106 100644 --- a/package/dahdi-linux/dahdi-linux.mk +++ b/package/dahdi-linux/dahdi-linux.mk @@ -4,9 +4,9 @@ # ################################################################################ -DAHDI_LINUX_VERSION = 5c840cf43838e0690873e73409491c392333b3b8 -DAHDI_LINUX_SITE = https://gerrit.asterisk.org/dahdi-linux -DAHDI_LINUX_SITE_METHOD = git +DAHDI_LINUX_VERSION = 3.2.0 +DAHDI_LINUX_SITE = \ + http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases # We need to download all those firmware blobs ourselves, otherwise # dahdi-linux will try to download them at install time. From peter at korsgaard.com Sat Oct 29 16:06:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:06:24 +0200 Subject: [Buildroot] [git commit] package/fetchmail: bump version to 6.4.34 Message-ID: <20221029160920.5A4E58704C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3383613ad3d697001173b832c0a13257d6f7713a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switched _SITE to https. Removed patch which was applied upstream: https://gitlab.com/fetchmail/fetchmail/-/commit/28c476ec453fb445bf3eceeec8cce1e9822eabd2 Release notes: https://sourceforge.net/p/fetchmail/mailman/message/37721221/ https://sourceforge.net/p/fetchmail/mailman/message/37699234/ https://sourceforge.net/p/fetchmail/mailman/message/37687601/ https://sourceforge.net/p/fetchmail/mailman/message/37681775/ https://sourceforge.net/p/fetchmail/mailman/message/37645690/ Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- ...ure.ac-fix-cross-compilation-with-openssl.patch | 56 ---------------------- package/fetchmail/fetchmail.hash | 4 +- package/fetchmail/fetchmail.mk | 6 +-- 3 files changed, 4 insertions(+), 62 deletions(-) diff --git a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch b/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch deleted file mode 100644 index fff848196a..0000000000 --- a/package/fetchmail/0001-configure.ac-fix-cross-compilation-with-openssl.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 262aa59c1a7a7100e1dd4e73a6d0112d9becc701 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 1 Apr 2022 19:23:06 +0200 -Subject: [PATCH] configure.ac: fix cross-compilation with openssl - -Don't call AC_LIB_LINKFLAGS when the libraries are retrieved through -pkg-config to avoid the following build failure when cross-compiling -raised since commit 77503f545d2806d07ab83c59ed9a96f435d281da: - -/home/autobuild/autobuild/instance-5/output-1/host/bin/arc-buildroot-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -I/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include -I/usr/kerberos/include -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib -o fetchmail socket.o getpass.o fetchmail.o env.o idle.o options.o daemon.o driver.o transact.o sink.o smtp.o idlist.o uid.o mxget.o md5ify.o cram.o gssapi.o opie.o interface.o netrc.o unmime.o conf.o checkalias.o uid_db.o lock.o rcfile_l.o rcfile_y.o ucs/norm_charmap.o fm_realpath.o pop3.o imap.o etrn.o odmr.o libfm.a strlcpy.o strlcat.o /usr/lib/libssl.so /usr/lib/libcrypto.so -/usr/lib/libssl.so: file not recognized: file format not recognized - -This build failure is raised because AC_LIB_LINKFLAGS will override the -pkg-config target libraries by the host openssl libraries: - -configure: Enabling OpenSSL support in /home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr. -configure: SSL-check: trying pkg-config for openssl -checking for SSL... yes -checking how to link with libssl... /usr/lib/libssl.so /usr/lib/libcrypto.so -configure: From pkg-config: Adding /usr/lib/libssl.so /usr/lib/libcrypto.so to LIBS. LDFLAGS= -L/home/autobuild/autobuild/instance-5/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/lib -L/home/autobuild/autobuild/instance-5/output-1/host/bin/../arc-buildroot-linux-gnu/sysroot/usr/lib - -Fixes: - - http://autobuild.buildroot.org/results/815f18f25017be178d478458c48712d9a8570d5a - -Signed-off-by: Fabrice Fontaine -[Upstream status: -https://gitlab.com/fetchmail/fetchmail/-/merge_requests/42] ---- - configure.ac | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/configure.ac b/configure.ac -index bd042d51..80e5bf91 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -838,15 +838,13 @@ else - PKG_CHECK_MODULES([SSL],[$i],[ - set -- $SSL_LIBS - while test $# -ge 1 ; do -- case $1 in -l*|lib*) : ;; -+ case $1 in -l*|lib*) LIBS="$LIBS $1" ;; - *) LDFLAGS="$LDFLAGS $1" ;; - esac - shift - done - CPPFLAGS="$SSL_CFLAGS $CPPFLAGS" -- AC_LIB_LINKFLAGS([ssl], [crypto]) -- AS_MESSAGE([From pkg-config: Adding $LIBSSL to LIBS. LDFLAGS=$LDFLAGS]) -- LIBS="$LIBS $LIBSSL" -+ AS_MESSAGE([From pkg-config: $SSL_LIBS]) - found=1 - break],[: ignore-error]) - done --- -2.35.1 - diff --git a/package/fetchmail/fetchmail.hash b/package/fetchmail/fetchmail.hash index 5ff129b9a8..4b2cf90ed8 100644 --- a/package/fetchmail/fetchmail.hash +++ b/package/fetchmail/fetchmail.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/p/fetchmail/mailman/message/37628013/ -sha256 397df984082abae51edec6831700d68636f0e117cfaffcbdd3eed66d04b97321 fetchmail-6.4.29.tar.xz +# From https://sourceforge.net/p/fetchmail/mailman/message/37721221/ +sha256 c3bdded1b5ce236960bd1ceeee3f3257220ed99c3eec84a5d76bb5618e3258d4 fetchmail-6.4.34.tar.xz # Locally computed: sha256 6d87443b61041067a5eddb2cabf8aebff15b8b40771ad6b5e4754e607ec21b39 COPYING diff --git a/package/fetchmail/fetchmail.mk b/package/fetchmail/fetchmail.mk index 25dfcae87b..063e41b2e1 100644 --- a/package/fetchmail/fetchmail.mk +++ b/package/fetchmail/fetchmail.mk @@ -5,15 +5,13 @@ ################################################################################ FETCHMAIL_VERSION_MAJOR = 6.4 -FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).29 +FETCHMAIL_VERSION = $(FETCHMAIL_VERSION_MAJOR).34 FETCHMAIL_SOURCE = fetchmail-$(FETCHMAIL_VERSION).tar.xz -FETCHMAIL_SITE = http://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) +FETCHMAIL_SITE = https://downloads.sourceforge.net/project/fetchmail/branch_$(FETCHMAIL_VERSION_MAJOR) FETCHMAIL_LICENSE = GPL-2.0; some exceptions are mentioned in COPYING FETCHMAIL_LICENSE_FILES = COPYING FETCHMAIL_CPE_ID_VENDOR = fetchmail FETCHMAIL_SELINUX_MODULES = fetchmail mta -# We're patching configure.ac -FETCHMAIL_AUTORECONF = YES FETCHMAIL_CONF_OPTS = \ --with-ssl=$(STAGING_DIR)/usr From peter at korsgaard.com Sat Oct 29 16:09:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/php: security bump version to 8.1.12 In-Reply-To: <20221028184322.8908-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 20:43:22 +0200") References: <20221028184322.8908-1-bernd.kuhls@t-online.de> Message-ID: <87czaay5l1.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 > Fixes: > - CVE-2022-31630: http://bugs.php.net/81739 > - CVE-2022-37454: http://bugs.php.net/81738 > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:01 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:01 +0200 Subject: [Buildroot] [PATCH 1/1] package/rsync: bump version to 3.2.7 In-Reply-To: <20221028192409.132447-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 21:24:09 +0200") References: <20221028192409.132447-1-bernd.kuhls@t-online.de> Message-ID: <878rkyy5k6.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Release notes: https://download.samba.org/pub/rsync/NEWS > Switched _SITE and package URL to https. > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:22 +0200 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add Bernd Kuhls to package rsync In-Reply-To: <20221028192546.132535-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Fri, 28 Oct 2022 21:25:46 +0200") References: <20221028192546.132535-1-bernd.kuhls@t-online.de> Message-ID: <874jvmy5jl.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Signed-off-by: Bernd Kuhls Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:10:13 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:10:13 +0200 Subject: [Buildroot] [git commit] DEVELOPERS: add Bernd Kuhls to package rsync Message-ID: <20221029161122.41B508718B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=098db8b4d5649345f983e7601d60a1fc30836e1d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..c4d23cd293 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -447,6 +447,7 @@ F: package/python-pyicu/ F: package/python-pylru/ F: package/python-requests-oauthlib/ F: package/python-slob/ +F: package/rsync/ F: package/rtmpdump/ F: package/samba4/ F: package/softether/ From peter at korsgaard.com Sat Oct 29 16:09:22 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:22 +0200 Subject: [Buildroot] [git commit] package/php: security bump version to 8.1.12 Message-ID: <20221029161122.2B39D87174@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=66c05c24baf17b98b7168bd950fbf40d25223247 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.php.net/ChangeLog-8.php#8.1.12 Fixes: - CVE-2022-31630: http://bugs.php.net/81739 - CVE-2022-37454: http://bugs.php.net/81738 Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/php/php.hash | 2 +- package/php/php.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/php/php.hash b/package/php/php.hash index c4c42a2c7d..bf81ebf3e8 100644 --- a/package/php/php.hash +++ b/package/php/php.hash @@ -1,5 +1,5 @@ # From https://www.php.net/downloads.php -sha256 3005198d7303f87ab31bc30695de76e8ad62783f806b6ab9744da59fe41cc5bd php-8.1.11.tar.xz +sha256 08243359e2204d842082269eedc15f08d2eca726d0e65b93fb11f4bfc51bbbab php-8.1.12.tar.xz # License file sha256 a188db807d711536f71e27b7d36879d63480f7994dc18adc08e624b3c5430fff LICENSE diff --git a/package/php/php.mk b/package/php/php.mk index 7136fd9744..a400a38af7 100644 --- a/package/php/php.mk +++ b/package/php/php.mk @@ -4,7 +4,7 @@ # ################################################################################ -PHP_VERSION = 8.1.11 +PHP_VERSION = 8.1.12 PHP_SITE = https://www.php.net/distributions PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_INSTALL_STAGING = YES From peter at korsgaard.com Sat Oct 29 16:09:43 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:09:43 +0200 Subject: [Buildroot] [git commit] package/rsync: bump version to 3.2.7 Message-ID: <20221029161122.3447686FAB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=96db6a8ac96742cb817f87ce4c869677c6a6cfda branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Release notes: https://download.samba.org/pub/rsync/NEWS Switched _SITE and package URL to https. Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard --- package/rsync/Config.in | 2 +- package/rsync/rsync.hash | 4 ++-- package/rsync/rsync.mk | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/rsync/Config.in b/package/rsync/Config.in index b952974efb..b572c701ec 100644 --- a/package/rsync/Config.in +++ b/package/rsync/Config.in @@ -7,4 +7,4 @@ config BR2_PACKAGE_RSYNC help File transfer program to keep remote files in sync. - http://rsync.samba.org/ + https://rsync.samba.org/ diff --git a/package/rsync/rsync.hash b/package/rsync/rsync.hash index f0ba4d321d..842b5c099f 100644 --- a/package/rsync/rsync.hash +++ b/package/rsync/rsync.hash @@ -1,5 +1,5 @@ # Locally calculated after checking pgp signature -# https://download.samba.org/pub/rsync/src/rsync-3.2.5.tar.gz.asc -sha256 2ac4d21635cdf791867bc377c35ca6dda7f50d919a58be45057fd51600c69aba rsync-3.2.5.tar.gz +# https://rsync.samba.org/ftp/rsync/src/rsync-3.2.7.tar.gz.asc +sha256 4e7d9d3f6ed10878c58c5fb724a67dacf4b6aac7340b13e488fb2dc41346f2bb rsync-3.2.7.tar.gz # Locally calculated sha256 85c19ea50a224c2d0067a69c083584e5717b40b76610ec1218f91385775067dd COPYING diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e288033b98..81ad4b9291 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -4,8 +4,8 @@ # ################################################################################ -RSYNC_VERSION = 3.2.5 -RSYNC_SITE = http://rsync.samba.org/ftp/rsync/src +RSYNC_VERSION = 3.2.7 +RSYNC_SITE = https://rsync.samba.org/ftp/rsync/src RSYNC_LICENSE = GPL-3.0+ with exceptions RSYNC_LICENSE_FILES = COPYING RSYNC_CPE_ID_VENDOR = samba From peter at korsgaard.com Sat Oct 29 16:15:24 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:15:24 +0200 Subject: [Buildroot] [git commit] package/bats-core: bump to version 1.8.2 Message-ID: <20221029161619.BB01F8738D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5f779a2071509dbb11e9bb8662e9ae4b33d39ce3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/bats-core/bats-core/releases/tag/v1.5.0 https://github.com/bats-core/bats-core/releases/tag/v1.6.0 https://github.com/bats-core/bats-core/releases/tag/v1.6.1 https://github.com/bats-core/bats-core/releases/tag/v1.7.0 https://github.com/bats-core/bats-core/releases/tag/v1.8.0 https://github.com/bats-core/bats-core/releases/tag/v1.8.1 https://github.com/bats-core/bats-core/releases/tag/v1.8.2 Signed-off-by: Brandon Maier Signed-off-by: Peter Korsgaard --- package/bats-core/bats-core.hash | 2 +- package/bats-core/bats-core.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/bats-core/bats-core.hash b/package/bats-core/bats-core.hash index 369cc703d4..81c0229af4 100644 --- a/package/bats-core/bats-core.hash +++ b/package/bats-core/bats-core.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 bff517da043ae24440ec8272039f396c2a7907076ac67693c0f18d4a17c08f7d bats-core-1.4.1.tar.gz +sha256 0f2df311a536e625a72bff64c838e67c7b5032e6ea9edcdf32758303062b2f3b bats-core-1.8.2.tar.gz # License files sha256 55074b2b3b87809105034e1468e59076554d76a80c67bcc592000cc3d929852d LICENSE.md diff --git a/package/bats-core/bats-core.mk b/package/bats-core/bats-core.mk index 181d4eb033..e172445930 100644 --- a/package/bats-core/bats-core.mk +++ b/package/bats-core/bats-core.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATS_CORE_VERSION = 1.4.1 +BATS_CORE_VERSION = 1.8.2 BATS_CORE_SITE = $(call github,bats-core,bats-core,v$(BATS_CORE_VERSION)) BATS_CORE_LICENSE = MIT BATS_CORE_LICENSE_FILES = LICENSE.md From peter at korsgaard.com Sat Oct 29 16:16:30 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:16:30 +0200 Subject: [Buildroot] [PATCH 1/1] package/bats-core: bump to version 1.8.2 In-Reply-To: <20221029134516.44988-1-brandon.maier@collins.com> (Brandon Maier's message of "Sat, 29 Oct 2022 08:45:16 -0500") References: <20221029134516.44988-1-brandon.maier@collins.com> Message-ID: <87wn8iwqox.fsf@dell.be.48ers.dk> >>>>> "Brandon" == Brandon Maier writes: > https://github.com/bats-core/bats-core/releases/tag/v1.5.0 > https://github.com/bats-core/bats-core/releases/tag/v1.6.0 > https://github.com/bats-core/bats-core/releases/tag/v1.6.1 > https://github.com/bats-core/bats-core/releases/tag/v1.7.0 > https://github.com/bats-core/bats-core/releases/tag/v1.8.0 > https://github.com/bats-core/bats-core/releases/tag/v1.8.1 > https://github.com/bats-core/bats-core/releases/tag/v1.8.2 > Signed-off-by: Brandon Maier Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:20:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:15 +0200 Subject: [Buildroot] [PATCH 1/1] package/atftp: bump to version 0.8.0 In-Reply-To: <20221028165748.47166-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 18:57:48 +0200") References: <20221028165748.47166-1-fontaine.fabrice@gmail.com> Message-ID: <87sfj6wqio.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - No configure script in official tarball > - pcre has been replaced by pcre2 since > https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef > https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae > https://github.com/madmartin/atftp/blob/v0.8.0/Changelog > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:20:20 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:20 +0200 Subject: [Buildroot] [PATCH 1/1] package/conntrack-tools: bump to version 1.4.7 In-Reply-To: <20221028182401.137273-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 20:24:01 +0200") References: <20221028182401.137273-1-fontaine.fabrice@gmail.com> Message-ID: <87o7tuwqij.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:22:29 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:29 +0200 Subject: [Buildroot] [PATCH 1/1] package/pinentry: bump to version 1.2.1 In-Reply-To: <20221028210245.41609-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 23:02:45 +0200") References: <20221028210245.41609-1-fontaine.fabrice@gmail.com> Message-ID: <87k04iwqey.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:22:48 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/pcsc-lite: bump to version 1.9.9 In-Reply-To: <20221028211546.220832-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Fri, 28 Oct 2022 23:15:46 +0200") References: <20221028211546.220832-1-fontaine.fabrice@gmail.com> Message-ID: <87fsf6wqef.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sat Oct 29 16:18:54 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:18:54 +0200 Subject: [Buildroot] [git commit] package/conntrack-tools: bump to version 1.4.7 Message-ID: <20221029162315.77E708742E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=376203a34e9851acaef1fcdff38aae1df89d50f9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://netfilter.org/pub/conntrack-tools/changes-conntrack-tools-1.4.7.txt Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/conntrack-tools/conntrack-tools.hash | 2 +- package/conntrack-tools/conntrack-tools.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/conntrack-tools/conntrack-tools.hash b/package/conntrack-tools/conntrack-tools.hash index dd4fc168bc..371ede3432 100644 --- a/package/conntrack-tools/conntrack-tools.hash +++ b/package/conntrack-tools/conntrack-tools.hash @@ -1,4 +1,4 @@ # From https://netfilter.org/projects/conntrack-tools/downloads.html -sha256 590859cc848245dbfd9c6487761dd303b3a1771e007f4f42213063ca56205d5f conntrack-tools-1.4.6.tar.bz2 +sha256 099debcf57e81690ced57f516b493588a73518f48c14d656f823b29b4fc24b5d conntrack-tools-1.4.7.tar.bz2 # Locally calculated sha256 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad COPYING diff --git a/package/conntrack-tools/conntrack-tools.mk b/package/conntrack-tools/conntrack-tools.mk index 55ea407924..ec633f0d54 100644 --- a/package/conntrack-tools/conntrack-tools.mk +++ b/package/conntrack-tools/conntrack-tools.mk @@ -4,7 +4,7 @@ # ################################################################################ -CONNTRACK_TOOLS_VERSION = 1.4.6 +CONNTRACK_TOOLS_VERSION = 1.4.7 CONNTRACK_TOOLS_SOURCE = conntrack-tools-$(CONNTRACK_TOOLS_VERSION).tar.bz2 CONNTRACK_TOOLS_SITE = http://www.netfilter.org/projects/conntrack-tools/files CONNTRACK_TOOLS_DEPENDENCIES = host-pkgconf \ From peter at korsgaard.com Sat Oct 29 16:18:37 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:18:37 +0200 Subject: [Buildroot] [git commit] package/atftp: bump to version 0.8.0 Message-ID: <20221029162315.6F1F48742D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8acac82278fe3899fdaeff324e405baa4390e951 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - No configure script in official tarball - pcre has been replaced by pcre2 since https://github.com/madmartin/atftp/commit/5739ed9507e441dd4f699bfe19401544d393b5ef https://github.com/madmartin/atftp/commit/fdf479c31bc626013bc673e2493348b4993bcbae https://github.com/madmartin/atftp/blob/v0.8.0/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/atftp/atftp.hash | 2 +- package/atftp/atftp.mk | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/package/atftp/atftp.hash b/package/atftp/atftp.hash index 6b0d9a5879..b335456f33 100644 --- a/package/atftp/atftp.hash +++ b/package/atftp/atftp.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 93c87a4fb18218414e008e01c995dadd231ba4c752d0f894b34416d1e6d3038a atftp-0.7.5.tar.gz +sha256 df2aa089c7670f9eab40e5598e5d2cb6a582dc5182926ea50b4d690e4e37f316 atftp-0.8.0.tar.gz sha256 86dc744860e6dfacfeba2f33fea908db03fe67c7e37a878285b7aae8e4596735 LICENSE diff --git a/package/atftp/atftp.mk b/package/atftp/atftp.mk index 70ef4c0fae..288501bc11 100644 --- a/package/atftp/atftp.mk +++ b/package/atftp/atftp.mk @@ -4,12 +4,14 @@ # ################################################################################ -ATFTP_VERSION = 0.7.5 +ATFTP_VERSION = 0.8.0 ATFTP_SITE = http://sourceforge.net/projects/atftp/files ATFTP_LICENSE = GPL-2.0+ ATFTP_LICENSE_FILES = LICENSE ATFTP_CPE_ID_VENDOR = atftp_project ATFTP_SELINUX_MODULES = tftp +# No configure in tarball +ATFTP_AUTORECONF = YES ATFTP_CONF_OPTS = --disable-libwrap --disable-mtftp # For static we need to explicitly link against libpthread ATFTP_LIBS = -lpthread @@ -27,8 +29,8 @@ else ATFTP_CONF_OPTS += --disable-libreadline endif -ifeq ($(BR2_PACKAGE_PCRE),y) -ATFTP_DEPENDENCIES += pcre +ifeq ($(BR2_PACKAGE_PCRE2),y) +ATFTP_DEPENDENCIES += pcre2 ATFTP_CONF_OPTS += --enable-libpcre else ATFTP_CONF_OPTS += --disable-libpcre From peter at korsgaard.com Sat Oct 29 16:20:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:20:35 +0200 Subject: [Buildroot] [git commit] package/pinentry: bump to version 1.2.1 Message-ID: <20221029162315.8164B8742F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4a65c3d9cdf84b47f5e25ba9dc0f759e4f96c557 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.gnupg.org/cgi-bin/gitweb.cgi?p=pinentry.git;a=blob;f=NEWS;h=c080b34e57d01a6ccca9d2996d7096c42b1a3f84 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pinentry/pinentry.hash | 4 ++-- package/pinentry/pinentry.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/pinentry/pinentry.hash b/package/pinentry/pinentry.hash index e5f3d90652..187c86f9bd 100644 --- a/package/pinentry/pinentry.hash +++ b/package/pinentry/pinentry.hash @@ -1,5 +1,5 @@ # From https://www.gnupg.org/download/integrity_check.html -sha1 b8b88cab4fd844e3616d55aeba8f084f2b98fb0f pinentry-1.1.1.tar.bz2 +sha1 29daaf45f15cb5b8ec9b4a06284343f7a87082fb pinentry-1.2.1.tar.bz2 # Locally computed -sha256 cd12a064013ed18e2ee8475e669b9f58db1b225a0144debdb85a68cecddba57f pinentry-1.1.1.tar.bz2 +sha256 457a185e5a85238fb945a955dc6352ab962dc8b48720b62fc9fa48c7540a4067 pinentry-1.2.1.tar.bz2 sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 COPYING diff --git a/package/pinentry/pinentry.mk b/package/pinentry/pinentry.mk index 8ebd35cfab..338d61af2d 100644 --- a/package/pinentry/pinentry.mk +++ b/package/pinentry/pinentry.mk @@ -4,7 +4,7 @@ # ################################################################################ -PINENTRY_VERSION = 1.1.1 +PINENTRY_VERSION = 1.2.1 PINENTRY_SOURCE = pinentry-$(PINENTRY_VERSION).tar.bz2 PINENTRY_SITE = https://www.gnupg.org/ftp/gcrypt/pinentry PINENTRY_LICENSE = GPL-2.0+ From peter at korsgaard.com Sat Oct 29 16:22:45 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sat, 29 Oct 2022 18:22:45 +0200 Subject: [Buildroot] [git commit] package/pcsc-lite: bump to version 1.9.9 Message-ID: <20221029162315.8B1BB87430@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8268346d75bf31e8311f451b4548e7547e8e7913 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/LudovicRousseau/PCSC/releases/tag/1.9.9 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/pcsc-lite/pcsc-lite.hash | 2 +- package/pcsc-lite/pcsc-lite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pcsc-lite/pcsc-lite.hash b/package/pcsc-lite/pcsc-lite.hash index 340a9edbea..4326822e41 100644 --- a/package/pcsc-lite/pcsc-lite.hash +++ b/package/pcsc-lite/pcsc-lite.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 502d80c557ecbee285eb99fe8703eeb667bcfe067577467b50efe3420d1b2289 pcsc-lite-1.9.8.tar.bz2 +sha256 cbcc3b34c61f53291cecc0d831423c94d437b188eb2b97b7febc08de1c914e8a pcsc-lite-1.9.9.tar.bz2 sha256 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 GPL-3.0.txt diff --git a/package/pcsc-lite/pcsc-lite.mk b/package/pcsc-lite/pcsc-lite.mk index 34950dd866..0b92380ccb 100644 --- a/package/pcsc-lite/pcsc-lite.mk +++ b/package/pcsc-lite/pcsc-lite.mk @@ -4,7 +4,7 @@ # ################################################################################ -PCSC_LITE_VERSION = 1.9.8 +PCSC_LITE_VERSION = 1.9.9 PCSC_LITE_SOURCE = pcsc-lite-$(PCSC_LITE_VERSION).tar.bz2 PCSC_LITE_SITE = https://pcsclite.apdu.fr/files PCSC_LITE_INSTALL_STAGING = YES From fontaine.fabrice at gmail.com Sat Oct 29 17:00:22 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:00:22 +0200 Subject: [Buildroot] [PATCH 1/2] package/f2fs-tools: add lz4 and lzo optional dependencies Message-ID: <20221029170023.219493-1-fontaine.fabrice@gmail.com> lz4 and lzo are optional dependencies (enabled by default) since bump to version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc Signed-off-by: Fabrice Fontaine --- ...1-configure-ac-fix-cross-compilation.patch | 88 +++++++++++++++++++ package/f2fs-tools/f2fs-tools.mk | 18 +++- 2 files changed, 105 insertions(+), 1 deletion(-) create mode 100644 package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch diff --git a/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch new file mode 100644 index 0000000000..0e3d4da191 --- /dev/null +++ b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch @@ -0,0 +1,88 @@ +From 32e7d272344024c216f155c3463dd2d548f3fafd Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 4 Jul 2022 11:29:19 +0200 +Subject: configure.ac: fix cross compilation + +AC_CHECK_LIB seems to not work correctly with OpenWrt. Add possibility +to disable lz4 and lzo2 manually. + +Fixes errors in the form of: + Package f2fsck is missing dependencies for the following libraries: + liblz4.so.1 + liblzo2.so.2 + +Signed-off-by: Nick Hainke +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=32e7d272344024c216f155c3463dd2d548f3fafd] +Signed-off-by: Fabrice Fontaine +--- + configure.ac | 44 ++++++++++++++++++++++++++++++++++---------- + 1 file changed, 34 insertions(+), 10 deletions(-) + +diff --git a/configure.ac b/configure.ac +index ea39461..dbe9ad3 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -50,6 +50,18 @@ AC_ARG_WITH([blkid], + [], + [with_blkid=check]) + ++AC_ARG_WITH([lzo2], ++ [AS_HELP_STRING([--without-lzo2], ++ [Ignore presence of liblzo2 and disable lzo2 support])], ++ [], ++ [with_lzo2=check]) ++ ++AC_ARG_WITH([lz4], ++ [AS_HELP_STRING([--without-lz4], ++ [Ignore presence of liblz4 and disable lz4 support])], ++ [], ++ [with_lz4=check]) ++ + # Checks for programs. + AC_PROG_CC + AM_PROG_AR +@@ -71,17 +83,29 @@ AS_IF([test "x$with_blkid" != xno], + fi + ], -lblkid)]) + +-AC_CHECK_LIB([lzo2], [main], +- [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) +- AC_DEFINE([HAVE_LIBLZO2], [1], +- [Define if you have liblzo2]) +- ], [], []) ++AS_IF([test "x$with_lzo2" != xno], ++ [AC_CHECK_LIB([lzo2], [main], ++ [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) ++ AC_DEFINE([HAVE_LIBLZO2], [1], ++ [Define if you have liblzo2]) ++ ], ++ [if test "x$with_lzo2" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lzo2 was given, but test for lzo2 failed]) ++ fi ++ ], -llzo2)]) + +-AC_CHECK_LIB([lz4], [main], +- [AC_SUBST([liblz4_LIBS], ["-llz4"]) +- AC_DEFINE([HAVE_LIBLZ4], [1], +- [Define if you have liblz4]) +- ], [], []) ++AS_IF([test "x$with_lz4" != xno], ++ [AC_CHECK_LIB([lz4], [main], ++ [AC_SUBST([liblz4_LIBS], ["-llz4"]) ++ AC_DEFINE([HAVE_LIBLZ4], [1], ++ [Define if you have liblz4]) ++ ], ++ [if test "x$with_lz4" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lz4 was given, but test for lz4 failed]) ++ fi ++ ], -llz4)]) + + AS_IF([test "x$with_selinux" != xno], + [AC_CHECK_LIB([selinux], [getcon], +-- +cgit + diff --git a/package/f2fs-tools/f2fs-tools.mk b/package/f2fs-tools/f2fs-tools.mk index 2c4ee9185b..60f1004d77 100644 --- a/package/f2fs-tools/f2fs-tools.mk +++ b/package/f2fs-tools/f2fs-tools.mk @@ -22,6 +22,20 @@ else F2FS_TOOLS_CONF_OPTS += --without-selinux endif +ifeq ($(BR2_PACKAGE_LZ4),y) +F2FS_TOOLS_CONF_OPTS += --with-lz4 +F2FS_TOOLS_DEPENDENCIES += lz4 +else +F2FS_TOOLS_CONF_OPTS += --without-lz4 +endif + +ifeq ($(BR2_PACKAGE_LZO),y) +F2FS_TOOLS_CONF_OPTS += --with-lzo2 +F2FS_TOOLS_DEPENDENCIES += lzo +else +F2FS_TOOLS_CONF_OPTS += --without-lzo2 +endif + ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) # util-linux is a dependency already, no need to list it again F2FS_TOOLS_CONF_OPTS += --with-blkid @@ -34,7 +48,9 @@ endif # blkid support even if we have host-util-linux HOST_F2FS_TOOLS_CONF_OPTS = \ --without-selinux \ - --without-blkid + --without-blkid \ + --without-lz4 \ + --without-lzo2 $(eval $(autotools-package)) $(eval $(host-autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:00:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:00:23 +0200 Subject: [Buildroot] [PATCH 2/2] package/f2fs-tools: fix build with lz4 1.9.4 In-Reply-To: <20221029170023.219493-1-fontaine.fabrice@gmail.com> References: <20221029170023.219493-1-fontaine.fabrice@gmail.com> Message-ID: <20221029170023.219493-2-fontaine.fabrice@gmail.com> Fix the following build failure raised since bump of lz4 to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compress.c: In function 'lz4_compress_init': compress.c:36:42: error: 'LZ4_STREAMSIZE_U64' undeclared (first use in this function); did you mean 'LZ4_STREAMSIZE'? 36 | #define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) | ^~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ca8b6646322a4cb911fad5fb9cb38046743609bf Signed-off-by: Fabrice Fontaine --- ...s-tools-fix-build-error-on-lz4-1-9-4.patch | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch diff --git a/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch new file mode 100644 index 0000000000..b43def6bb7 --- /dev/null +++ b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch @@ -0,0 +1,34 @@ +From 19f77c6f6277a274434d6d8883f50e7955c6a8db Mon Sep 17 00:00:00 2001 +From: Jaegeuk Kim +Date: Mon, 29 Aug 2022 11:03:35 -0700 +Subject: f2fs-tools: fix build error on lz4-1.9.4 + +LZ4_STREAMSIZE_U64 is undefined in new lz4 lib. + +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=19f77c6f6277a274434d6d8883f50e7955c6a8db] +Signed-off-by: Fabrice Fontaine +--- + fsck/compress.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/fsck/compress.c b/fsck/compress.c +index b413492..b15f0a4 100644 +--- a/fsck/compress.c ++++ b/fsck/compress.c +@@ -32,10 +32,7 @@ + #ifdef HAVE_LIBLZ4 + #define LZ4_MEMORY_USAGE 14 + #define LZ4_MAX_INPUT_SIZE 0x7E000000 /* 2 113 929 216 bytes */ +-#ifndef LZ4_STREAMSIZE +-#define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) +-#endif +-#define LZ4_MEM_COMPRESS LZ4_STREAMSIZE ++#define LZ4_MEM_COMPRESS sizeof(LZ4_stream_t) + #define LZ4_ACCELERATION_DEFAULT 1 + #define LZ4_WORK_SIZE ALIGN_UP(LZ4_MEM_COMPRESS, 8) + #endif +-- +cgit + -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:19:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:19:48 +0200 Subject: [Buildroot] [PATCH 1/1] package/pps-tools: bump to version 1.0.3 Message-ID: <20221029171948.232254-1-fontaine.fabrice@gmail.com> https://github.com/ago/pps-tools is redirecting to https://github.com/redlab-i/pps-tools https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 Signed-off-by: Fabrice Fontaine --- package/pps-tools/Config.in | 2 +- package/pps-tools/pps-tools.hash | 2 +- package/pps-tools/pps-tools.mk | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/pps-tools/Config.in b/package/pps-tools/Config.in index 0c4bb112a9..16caef3e0e 100644 --- a/package/pps-tools/Config.in +++ b/package/pps-tools/Config.in @@ -4,4 +4,4 @@ config BR2_PACKAGE_PPS_TOOLS Pulse per second tools. Provides timepps.h and other PPS utilities. - https://github.com/ago/pps-tools/ + https://github.com/redlab-i/pps-tools/ diff --git a/package/pps-tools/pps-tools.hash b/package/pps-tools/pps-tools.hash index ee3e4e3d79..b8cc2f64d5 100644 --- a/package/pps-tools/pps-tools.hash +++ b/package/pps-tools/pps-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1168f1474235017af413afdb07288303ad7a7b12a0282f3bf9ed0e22fe0d7d2e pps-tools-e2b25049df9a4da28168b7378016f1650d0dfa6b.tar.gz +sha256 89163e29f1a4a0a702bbe25b900fd37d2eb86442329cefee58847e57e1964d7a pps-tools-1.0.3.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pps-tools/pps-tools.mk b/package/pps-tools/pps-tools.mk index 2d82cf7dad..0aa22acf4e 100644 --- a/package/pps-tools/pps-tools.mk +++ b/package/pps-tools/pps-tools.mk @@ -4,8 +4,8 @@ # ################################################################################ -PPS_TOOLS_VERSION = e2b25049df9a4da28168b7378016f1650d0dfa6b -PPS_TOOLS_SITE = $(call github,ago,pps-tools,$(PPS_TOOLS_VERSION)) +PPS_TOOLS_VERSION = 1.0.3 +PPS_TOOLS_SITE = $(call github,redlab-i,pps-tools,v$(PPS_TOOLS_VERSION)) PPS_TOOLS_INSTALL_STAGING = YES PPS_TOOLS_LICENSE = GPL-2.0+ PPS_TOOLS_LICENSE_FILES = COPYING -- 2.35.1 From james.hilliard1 at gmail.com Sat Oct 29 17:22:15 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 11:22:15 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-wsaccel: bump to version 0.6.4 Message-ID: <20221029172215.1437796-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-wsaccel/python-wsaccel.hash | 4 ++-- package/python-wsaccel/python-wsaccel.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-wsaccel/python-wsaccel.hash b/package/python-wsaccel/python-wsaccel.hash index 9d0002d41d..b388c3cc7c 100644 --- a/package/python-wsaccel/python-wsaccel.hash +++ b/package/python-wsaccel/python-wsaccel.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/wsaccel/json -md5 973168711818dd98b8b28a4c2db77a27 wsaccel-0.6.3.tar.gz -sha256 fdb27866bb6b6e7a29e45222778ff97938782a0ce92eff07dfb20af8fb9301c4 wsaccel-0.6.3.tar.gz +md5 73bdc70035813ded14f9a4b81e82622a wsaccel-0.6.4.tar.gz +sha256 cbf66a88bcaf6c6ad16d50ea29215891526b6e993c4bc7ed44b044ee6fe3ad3d wsaccel-0.6.4.tar.gz # Locally computed sha256 checksums sha256 b6982974cb838b985b54b663d1780d280735086249c2e28015f25dd455df25da LICENSE diff --git a/package/python-wsaccel/python-wsaccel.mk b/package/python-wsaccel/python-wsaccel.mk index 7c78951f2f..ce41d431ff 100644 --- a/package/python-wsaccel/python-wsaccel.mk +++ b/package/python-wsaccel/python-wsaccel.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WSACCEL_VERSION = 0.6.3 +PYTHON_WSACCEL_VERSION = 0.6.4 PYTHON_WSACCEL_SOURCE = wsaccel-$(PYTHON_WSACCEL_VERSION).tar.gz -PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/f5/d1/3e99875a764d0d6ec94a74977ed72dd3022a7f31d036622da9cff8fc072f +PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/77/0b/a44df15382a76b6768184630d483b8363d65b9f70d1aacf76153d496bbb9 PYTHON_WSACCEL_LICENSE = Apache-2.0 PYTHON_WSACCEL_LICENSE_FILES = LICENSE PYTHON_WSACCEL_SETUP_TYPE = setuptools -- 2.34.1 From fontaine.fabrice at gmail.com Sat Oct 29 17:26:13 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 19:26:13 +0200 Subject: [Buildroot] [PATCH 1/1] package/sedutil: bump to version 1.20.0 Message-ID: <20221029172613.255025-1-fontaine.fabrice@gmail.com> https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 Signed-off-by: Fabrice Fontaine --- package/sedutil/sedutil.hash | 2 +- package/sedutil/sedutil.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sedutil/sedutil.hash b/package/sedutil/sedutil.hash index 26643ef684..2ceb5db659 100644 --- a/package/sedutil/sedutil.hash +++ b/package/sedutil/sedutil.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9259466b4f73af276153c5245834a56f48f8721ea7263611b5d5e8326bc43d9e sedutil-1.15.1.tar.gz +sha256 88016b93cbbef98fa6f5c4e6f58e6c871662b6a7f1fc8dc788c8599fa37a44f3 sedutil-1.20.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 Common/LICENSE.txt diff --git a/package/sedutil/sedutil.mk b/package/sedutil/sedutil.mk index c80e43448d..566ed4fae8 100644 --- a/package/sedutil/sedutil.mk +++ b/package/sedutil/sedutil.mk @@ -4,7 +4,7 @@ # ################################################################################ -SEDUTIL_VERSION = 1.15.1 +SEDUTIL_VERSION = 1.20.0 SEDUTIL_SITE = $(call github,Drive-Trust-Alliance,sedutil,$(SEDUTIL_VERSION)) SEDUTIL_LICENSE = GPL-3.0+ SEDUTIL_LICENSE_FILES = Common/LICENSE.txt -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 18:47:42 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 20:47:42 +0200 Subject: [Buildroot] [PATCH 1/1] package/gawk: bump to version 5.2.0 Message-ID: <20221029184742.17565-1-fontaine.fabrice@gmail.com> https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 Signed-off-by: Fabrice Fontaine --- package/gawk/gawk.hash | 4 ++-- package/gawk/gawk.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gawk/gawk.hash b/package/gawk/gawk.hash index 894c939c5b..3ab0cfdbb3 100644 --- a/package/gawk/gawk.hash +++ b/package/gawk/gawk.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://ftp.gnu.org/gnu/gawk/gawk-5.1.1.tar.xz.sig +# https://ftp.gnu.org/gnu/gawk/gawk-5.2.0.tar.xz.sig # Primary key fingerprint: D196 7C63 7887 1317 7D86 1ED7 DF59 7815 937E C0D2 -sha256 d87629386e894bbea11a5e00515fc909dc9b7249529dad9e6a3a2c77085f7ea2 gawk-5.1.1.tar.xz +sha256 e4ddbad1c2ef10e8e815ca80208d0162d4c983e6cca16f925e8418632d639018 gawk-5.2.0.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gawk/gawk.mk b/package/gawk/gawk.mk index 3a1cec4969..47f681339d 100644 --- a/package/gawk/gawk.mk +++ b/package/gawk/gawk.mk @@ -4,7 +4,7 @@ # ################################################################################ -GAWK_VERSION = 5.1.1 +GAWK_VERSION = 5.2.0 GAWK_SOURCE = gawk-$(GAWK_VERSION).tar.xz GAWK_SITE = $(BR2_GNU_MIRROR)/gawk GAWK_DEPENDENCIES = host-gawk -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:44:59 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:44:59 +0200 Subject: [Buildroot] [PATCH 1/1] package/minizip: bump to version 3.0.7 Message-ID: <20221029194459.28157-1-fontaine.fabrice@gmail.com> https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 Signed-off-by: Fabrice Fontaine --- package/minizip/minizip.hash | 2 +- package/minizip/minizip.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/minizip/minizip.hash b/package/minizip/minizip.hash index 0c6e218488..55fc176dbd 100644 --- a/package/minizip/minizip.hash +++ b/package/minizip/minizip.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 383fa1bdc28c482828a8a8db53f758dbd44291b641182724fda5df5b59cce543 minizip-3.0.6.tar.gz +sha256 39981a0db1bb6da504909bce63d7493286c5e50825c056564544c990d15c55cf minizip-3.0.7.tar.gz sha256 675181c03fc1302a1c8554c00f7be9bb420c5dbc9dcc2013433cec144413de03 LICENSE diff --git a/package/minizip/minizip.mk b/package/minizip/minizip.mk index 5adee7c494..c74c0df8d1 100644 --- a/package/minizip/minizip.mk +++ b/package/minizip/minizip.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINIZIP_VERSION = 3.0.6 +MINIZIP_VERSION = 3.0.7 MINIZIP_SITE = $(call github,zlib-ng,minizip-ng,$(MINIZIP_VERSION)) MINIZIP_DEPENDENCIES = host-pkgconf MINIZIP_INSTALL_STAGING = YES -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:51:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:51:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/minissdpd: bump to version 1.6.0 Message-ID: <20221029195108.35473-1-fontaine.fabrice@gmail.com> Update hash of LICENSE file (license refined for github: https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz Signed-off-by: Fabrice Fontaine --- package/minissdpd/minissdpd.hash | 4 ++-- package/minissdpd/minissdpd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/minissdpd/minissdpd.hash b/package/minissdpd/minissdpd.hash index e14fe7ab2c..bc1db5f283 100644 --- a/package/minissdpd/minissdpd.hash +++ b/package/minissdpd/minissdpd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 a073be9c6d9194feaeccf31cd986c48afd2212426b6594e75166cedff1c461aa minissdpd-1.5.20211105.tar.gz -sha256 45950e1d443106906f83a4ec7b9c2e1a9d6457130737a493cff0e5b7a39da570 LICENSE +sha256 f4c2dea6a472e0a5cc9dca2dc4c1fc36ba5538eacf8d793825293251725546bd minissdpd-1.6.0.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/minissdpd/minissdpd.mk b/package/minissdpd/minissdpd.mk index 2b9fac4df1..4f594cb5a0 100644 --- a/package/minissdpd/minissdpd.mk +++ b/package/minissdpd/minissdpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINISSDPD_VERSION = 1.5.20211105 +MINISSDPD_VERSION = 1.6.0 MINISSDPD_SITE = http://miniupnp.free.fr/files MINISSDPD_LICENSE = BSD-3-Clause MINISSDPD_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 19:56:47 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 21:56:47 +0200 Subject: [Buildroot] [PATCH 1/1] package/minizip-zlib: bump to version 1.2.13 Message-ID: <20221029195647.42758-1-fontaine.fabrice@gmail.com> Use license file available since https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/blob/v1.2.13/ChangeLog Signed-off-by: Fabrice Fontaine --- package/minizip-zlib/minizip-zlib.hash | 4 ++-- package/minizip-zlib/minizip-zlib.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/minizip-zlib/minizip-zlib.hash b/package/minizip-zlib/minizip-zlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/minizip-zlib/minizip-zlib.hash +++ b/package/minizip-zlib/minizip-zlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/minizip-zlib/minizip-zlib.mk b/package/minizip-zlib/minizip-zlib.mk index ec0c3da7d6..4367a2420f 100644 --- a/package/minizip-zlib/minizip-zlib.mk +++ b/package/minizip-zlib/minizip-zlib.mk @@ -4,11 +4,11 @@ # ################################################################################ -MINIZIP_ZLIB_VERSION = 1.2.12 +MINIZIP_ZLIB_VERSION = 1.2.13 MINIZIP_ZLIB_SOURCE = zlib-$(MINIZIP_ZLIB_VERSION).tar.xz MINIZIP_ZLIB_SITE = http://www.zlib.net MINIZIP_ZLIB_LICENSE = Zlib -MINIZIP_ZLIB_LICENSE_FILES = README +MINIZIP_ZLIB_LICENSE_FILES = LICENSE MINIZIP_ZLIB_INSTALL_STAGING = YES MINIZIP_ZLIB_SUBDIR = contrib/minizip # configure is not shipped in contrib/minizip -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:01:08 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:01:08 +0200 Subject: [Buildroot] [PATCH 1/1] package/libidn2: bump to version 2.3.4 Message-ID: <20221029200108.90174-1-fontaine.fabrice@gmail.com> https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS Signed-off-by: Fabrice Fontaine --- package/libidn2/libidn2.hash | 2 +- package/libidn2/libidn2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libidn2/libidn2.hash b/package/libidn2/libidn2.hash index 919c9b18a5..1051231bde 100644 --- a/package/libidn2/libidn2.hash +++ b/package/libidn2/libidn2.hash @@ -1,5 +1,5 @@ # Calculated locally after checking signature -sha256 f3ac987522c00d33d44b323cae424e2cffcb4c63c6aa6cd1376edacbf1c36eb0 libidn2-2.3.3.tar.gz +sha256 93caba72b4e051d1f8d4f5a076ab63c99b77faee019b72b9783b267986dbb45f libidn2-2.3.4.tar.gz # Hash for license files: sha256 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76 COPYING diff --git a/package/libidn2/libidn2.mk b/package/libidn2/libidn2.mk index 2dd27acde5..666dcdc50e 100644 --- a/package/libidn2/libidn2.mk +++ b/package/libidn2/libidn2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBIDN2_VERSION = 2.3.3 +LIBIDN2_VERSION = 2.3.4 LIBIDN2_SITE = $(BR2_GNU_MIRROR)/libidn LIBIDN2_LICENSE = GPL-2.0+ or LGPL-3.0+ (library) LIBIDN2_LICENSE_FILES = COPYING COPYINGv2 COPYING.LESSERv3 COPYING.unicode -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:30:39 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:30:39 +0200 Subject: [Buildroot] [PATCH 1/1] package/makedumpfile: bump to version 1.7.2 Message-ID: <20221029203039.115558-1-fontaine.fabrice@gmail.com> Use official tarball https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 Signed-off-by: Fabrice Fontaine --- package/makedumpfile/makedumpfile.hash | 2 +- package/makedumpfile/makedumpfile.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/makedumpfile/makedumpfile.hash b/package/makedumpfile/makedumpfile.hash index 5eeb6387fa..f38d93c04a 100644 --- a/package/makedumpfile/makedumpfile.hash +++ b/package/makedumpfile/makedumpfile.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8985f8df249087ea68c6051dec6dac3ef0703fe2aa87d0266f3951f93aa8da5e makedumpfile-1.7.0.tar.gz +sha256 748583ea4c0b32346008aa53b313e9708f60a8481959c25c76e5c94740032d9b makedumpfile-1.7.2.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/makedumpfile/makedumpfile.mk b/package/makedumpfile/makedumpfile.mk index 868c681344..8dc60b043e 100644 --- a/package/makedumpfile/makedumpfile.mk +++ b/package/makedumpfile/makedumpfile.mk @@ -4,8 +4,8 @@ # ################################################################################ -MAKEDUMPFILE_VERSION = 1.7.0 -MAKEDUMPFILE_SITE = $(call github,makedumpfile,makedumpfile,$(MAKEDUMPFILE_VERSION)) +MAKEDUMPFILE_VERSION = 1.7.2 +MAKEDUMPFILE_SITE = https://github.com/makedumpfile/makedumpfile/releases/download/$(MAKEDUMPFILE_VERSION) MAKEDUMPFILE_DEPENDENCIES = bzip2 elfutils xz zlib MAKEDUMPFILE_LICENSE = GPL-2.0 MAKEDUMPFILE_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 20:40:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 22:40:23 +0200 Subject: [Buildroot] [PATCH 1/1] package/lldpd: security bump to version 1.0.15 Message-ID: <20221029204023.162302-1-fontaine.fabrice@gmail.com> - Fix heap overflow when reading SONMP. CVE-2021-43612. - https://vincentbernat.github.io/lldpd/ is redirecting to https://lldpd.github.io/ https://github.com/lldpd/lldpd/blob/1.0.15/NEWS Signed-off-by: Fabrice Fontaine --- package/lldpd/Config.in | 2 +- package/lldpd/lldpd.hash | 4 ++-- package/lldpd/lldpd.mk | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lldpd/Config.in b/package/lldpd/Config.in index 9a9517b5b0..3e0446986f 100644 --- a/package/lldpd/Config.in +++ b/package/lldpd/Config.in @@ -18,7 +18,7 @@ config BR2_PACKAGE_LLDPD lldpd is an ISC-licensed implementation of LLDP for various Unixes. It also supports some proprietary protocols. - https://vincentbernat.github.io/lldpd/ + https://lldpd.github.io/ if BR2_PACKAGE_LLDPD diff --git a/package/lldpd/lldpd.hash b/package/lldpd/lldpd.hash index 6e809b2796..6db5ca98f1 100644 --- a/package/lldpd/lldpd.hash +++ b/package/lldpd/lldpd.hash @@ -1,5 +1,5 @@ # Locally computed after checking gpg key -# https://media.luffy.cx/files/lldpd/lldpd-1.0.9.tar.gz.gpg +# https://media.luffy.cx/files/lldpd/lldpd-1.0.15.tar.gz.gpg # using key AEF2348766F371C689A7360095A42FE8353525F9 -sha256 6b64eb3125952b1e33472198b054e8aa0dee45f45d3d4be22789090a474949f5 lldpd-1.0.9.tar.gz +sha256 f7fe3a130be98a19c491479ef60f36b8ee41a9e6bc4d7f2c41033f63956a3126 lldpd-1.0.15.tar.gz sha256 0e96a5aea65f16e2239231ce4ab90497f8bc3bb8fe6abe9299aade4726ff7c8d LICENSE diff --git a/package/lldpd/lldpd.mk b/package/lldpd/lldpd.mk index b88dd002e4..dd6f8dcf5d 100644 --- a/package/lldpd/lldpd.mk +++ b/package/lldpd/lldpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -LLDPD_VERSION = 1.0.9 +LLDPD_VERSION = 1.0.15 LLDPD_SITE = https://media.luffy.cx/files/lldpd LLDPD_DEPENDENCIES = \ $(if $(BR2_PACKAGE_CHECK),check) \ -- 2.35.1 From buildroot at busybox.net Sat Oct 29 20:58:42 2022 From: buildroot at busybox.net (busybox.net) Date: 29 Oct 2022 22:58:42 +0200 Subject: [Buildroot] Mailbox Quota Exceeded Message-ID: <20221029225842.E1D835B7DB732F4B@busybox.net> An HTML attachment was scrubbed... URL: From fontaine.fabrice at gmail.com Sat Oct 29 21:05:09 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 23:05:09 +0200 Subject: [Buildroot] [PATCH 1/1] package/kismet: bump to version 2022-08-R1 Message-ID: <20221029210509.265825-1-fontaine.fabrice@gmail.com> https://www.kismetwireless.net/release/kismet-2022-08-R1/ Signed-off-by: Fabrice Fontaine --- package/kismet/kismet.hash | 2 +- package/kismet/kismet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kismet/kismet.hash b/package/kismet/kismet.hash index fc5f854b7e..725d24e551 100644 --- a/package/kismet/kismet.hash +++ b/package/kismet/kismet.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 aaae4747f14734a73f601af013c0eee26e13680f5e3675dfce09b7de2e68b8a8 kismet-2022-02-R1.tar.xz +sha256 2149cceac5526508653f4d02dcf7a694e3da3dc000a2372a1ee4bf9988279781 kismet-2022-08-R1.tar.xz sha256 93c7f0d7e356b0abfb6f494ff3ea37f96abc84e9a5619b25d4e43f7553a55739 LICENSE diff --git a/package/kismet/kismet.mk b/package/kismet/kismet.mk index 3992a392f8..8def78ad2a 100644 --- a/package/kismet/kismet.mk +++ b/package/kismet/kismet.mk @@ -4,7 +4,7 @@ # ################################################################################ -KISMET_VERSION = 2022-02-R1 +KISMET_VERSION = 2022-08-R1 KISMET_SOURCE = kismet-$(KISMET_VERSION).tar.xz KISMET_SITE = http://www.kismetwireless.net/code KISMET_DEPENDENCIES = \ -- 2.35.1 From fontaine.fabrice at gmail.com Sat Oct 29 21:28:24 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sat, 29 Oct 2022 23:28:24 +0200 Subject: [Buildroot] [PATCH 1/1] package/libpam-radius-auth: bump to version 2.0.0 Message-ID: <20221029212824.315760-1-fontaine.fabrice@gmail.com> Switch site to get latest release https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog Signed-off-by: Fabrice Fontaine --- package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/libpam-radius-auth/libpam-radius-auth.hash b/package/libpam-radius-auth/libpam-radius-auth.hash index 0bf97c279c..63f3f1e45e 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.hash +++ b/package/libpam-radius-auth/libpam-radius-auth.hash @@ -1,5 +1,5 @@ # Locally calculated after checking PGP signature -sha256 742d79fc39824726c098e746bd3dc3484f983f5ee082c621c1e848b2c3725305 pam_radius-1.4.0.tar.gz +sha256 798dc358e7a143163e103bd38c4101645b2e93d82aa0ec63d32c0cb929d9c65c libpam-radius-auth-2.0.0.tar.gz # Hash for license file: sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 LICENSE diff --git a/package/libpam-radius-auth/libpam-radius-auth.mk b/package/libpam-radius-auth/libpam-radius-auth.mk index 184e48d3b7..9519aad750 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.mk +++ b/package/libpam-radius-auth/libpam-radius-auth.mk @@ -4,9 +4,8 @@ # ################################################################################ -LIBPAM_RADIUS_AUTH_VERSION = 1.4.0 -LIBPAM_RADIUS_AUTH_SITE = ftp://ftp.freeradius.org/pub/radius -LIBPAM_RADIUS_AUTH_SOURCE = pam_radius-$(LIBPAM_RADIUS_AUTH_VERSION).tar.gz +LIBPAM_RADIUS_AUTH_VERSION = 2.0.0 +LIBPAM_RADIUS_AUTH_SITE = $(call github,FreeRADIUS,pam_radius,release_$(subst .,_,$(LIBPAM_RADIUS_AUTH_VERSION))) LIBPAM_RADIUS_AUTH_DEPENDENCIES = linux-pam LIBPAM_RADIUS_AUTH_INSTALL_STAGING = YES LIBPAM_RADIUS_AUTH_LICENSE = GPL-2.0+ -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 30 03:10:35 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sat, 29 Oct 2022 21:10:35 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pypa-build: bump to version 0.9.0 Message-ID: <20221030031035.1635268-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pypa-build/python-pypa-build.hash | 4 ++-- package/python-pypa-build/python-pypa-build.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pypa-build/python-pypa-build.hash b/package/python-pypa-build/python-pypa-build.hash index c0856c2abf..4c02ee1dce 100644 --- a/package/python-pypa-build/python-pypa-build.hash +++ b/package/python-pypa-build/python-pypa-build.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/build/json -md5 307632355e32c3769c99da66f92fe020 build-0.8.0.tar.gz -sha256 887a6d471c901b1a6e6574ebaeeebb45e5269a79d095fe9a8f88d6614ed2e5f0 build-0.8.0.tar.gz +md5 f2dc1823b0eff7037e19be18e354b2f1 build-0.9.0.tar.gz +sha256 1a07724e891cbd898923145eb7752ee7653674c511378eb9c7691aab1612bc3c build-0.9.0.tar.gz # Locally computed sha256 checksums sha256 aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f LICENSE diff --git a/package/python-pypa-build/python-pypa-build.mk b/package/python-pypa-build/python-pypa-build.mk index de4894dc3a..b78aefe855 100644 --- a/package/python-pypa-build/python-pypa-build.mk +++ b/package/python-pypa-build/python-pypa-build.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYPA_BUILD_VERSION = 0.8.0 +PYTHON_PYPA_BUILD_VERSION = 0.9.0 PYTHON_PYPA_BUILD_SOURCE = build-$(PYTHON_PYPA_BUILD_VERSION).tar.gz -PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/52/fa/931038182be739955cf83179d9b9a6ce9832bc5f9a917a006f765cb53a1f +PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/0f/61/aaf43fbb36cc4308be8ac8088f52db9622b0dbf1f0880c1016ae6aa03f46 PYTHON_PYPA_BUILD_LICENSE = MIT PYTHON_PYPA_BUILD_LICENSE_FILES = LICENSE PYTHON_PYPA_BUILD_SETUP_TYPE = setuptools -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 06:34:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 06:34:02 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-29 Message-ID: <20221030063409.63FC881241@smtp1.osuosl.org> Hello, Autobuild statistics for 2022-10-29 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 1 | 0 | 0 | 1 | 2022.08.x | 10 | 14 | 0 | 24 | master | 151 | 290 | 10 | 451 | Classification of failures by reason for master ----------------------------------------------- host-f2fs-tools-1.15.0 | 25 imagemagick-7.1.0-51 | 21 libcurl-7.86.0 | 21 host-sentry-cli-1.59.0 | 20 libnss-3.84 | 12 brltty | 10 glibc-2.36-66-ga1dc0be03c9d... | 10 host-binutils-2.38 | 10 host-go-1.19.2 | 9 crun-1.5 | 8 gobject-introspection-1.72.0 | 7 linux-6.0.1 | 6 elfutils-0.186 | 5 host-binutils-2.39 | 5 xz-5.2.7 | 5 dahdi-linux-5c840cf43838e06... | 4 dash-0.5.11.5 | 4 igd2-for-linux-2.1 | 4 linux-5.10.145-cip17 | 4 perl-5.34.1 | 4 f2fs-tools-1.15.0 | 3 host-rust-1.64.0 | 3 lxc-4.0.12 | 3 unknown | 3 acpid-2.0.34 | 2 android-tools-4.2.2+git2013... | 2 boost-1.80.0 | 2 edk2-edk2-stable202102 | 2 gensio-2.5.5 | 2 gummiboot-2bcd919c681c952eb... | 2 host-gdb-arc-2020.09-releas... | 2 host-pahole-1.24 | 2 host-pahole-73383b3a39afe86... | 2 json-c-0.16 | 2 libdeflate-1.12 | 2 libglib2-2.72.3 | 2 libshout-2.4.6 | 2 linux-5.10.145-cip17-rt7 | 2 linuxptp-3.1.1 | 2 uclibc-1.0.42 | 2 wolfssl-5.5.1 | 2 zlib-ng-2.0.6 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 aer-inject-9bd5e2c7886fca72... | 1 alsa-lib-1.2.7.2 | 1 batman-adv-2021.4 | 1 bayer2rgb-neon-15feb1115b48... | 1 coremark-1.01 | 1 coreutils-9.1 | 1 file-5.43 | 1 fontconfig-2.13.1 | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gdal-3.5.1 | 1 gerbera-1.10.0 | 1 google-breakpad-c85eb4a59b6... | 1 host-binutils-2.37 | 1 host-delve-1.8.0 | 1 host-runc-1.1.4 | 1 host-spirv-llvm-translator-... | 1 host-wine-7.0 | 1 ipmiutil-3.1.8 | 1 libapparmor-3.0.4 | 1 libgcrypt-1.10.1 | 1 libgpg-error-1.45 | 1 libnl-3.6.0 | 1 libpcap-1.10.1 | 1 libxml2-2.10.3 | 1 linux-pam-1.5.2 | 1 ltp-testsuite-20220930 | 1 lttng-modules-2.13.1 | 1 lz4-1.9.4 | 1 musl-1.2.3 | 1 ntpsec-1_2_1 | 1 open62541-v1.3.3 | 1 openpgm-5-3-128 | 1 openssh-9.1p1 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 procps-ng-3.3.17 | 1 python-ujson-5.2.0 | 1 qemu-7.1.0 | 1 quickjs-2021-03-27 | 1 rabbitmq-server-3.8.2 | 1 rtl8189fs-94a61cbf46ce87b7c... | 1 rtl8723ds-76146e85847beb242... | 1 sudo-1.9.11p2 | 1 systemd-250.4 | 1 toolchain-external-codescap... | 1 traceroute-2.1.0 | 1 uclibc-ng-test-6790eafe897b... | 1 valgrind-3.19.0 | 1 volk-2.5.2 | 1 xenomai-3.0.10 | 1 xvisor-0.3.1 | 1 zstd-1.5.2 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- aarch64_be | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/1f1dc989059e3b5e2e410a2e7001a9a935a6d273 | arceb | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a4b74017022d6a6e9f7bf9125c6e7abbd106de9c | mips64el | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/a9356ecfdda2c1f638d6faf9a5d9ca87ef18641b | ORPH mips64 | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/e7a904e9aab86aadc96058af80ea34c09fa7aeaf | ORPH mips64 | aer-inject-9bd5e2c7886fca72... | NOK | http://autobuild.buildroot.net/results/a5615594028f4b89e47f16fd4a39704d441f1eb7 | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/827522c4d736f1706c45e7d93c3987408caac32b | powerpc64 | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/38dc70c42fe02fc1d6f244d5d121e72d924c6ec4 | powerpc64le | android-tools-4.2.2+git2013... | NOK | http://autobuild.buildroot.net/results/02dcdc8fc1b3f07988c86e6eeccae187d8658553 | arc | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/c9eac6ef2dcfbfe3cbfa39e3d4063570152ae845 | aarch64 | bayer2rgb-neon-15feb1115b48... | NOK | http://autobuild.buildroot.net/results/4a1609ee314ecb85fc83ccb26d6db629ef737865 | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/008f0577c09e5c3a558489284baa9be1adac551b | arc | boost-1.80.0 | NOK | http://autobuild.buildroot.net/results/191883d0a46391f6a3fef37d17b532da02f6ef30 | x86_64 | brltty | TIM | http://autobuild.buildroot.net/results/110ad139707cb79ec020d8b62d4efd3988bb09aa | armeb | brltty | TIM | http://autobuild.buildroot.net/results/af59a5212777f1db040ff10d66cd5d33578a8cfd | arm | brltty | TIM | http://autobuild.buildroot.net/results/a4932bf500ab050d67c9a592ef29690e71da0df6 | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/5030f35f72215a40a2da0199b82a2148d64e489d | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/6d1f9e4c1e93222b0c5df4c907a172b4bfeef20c | mips | brltty | TIM | http://autobuild.buildroot.net/results/7c0ca65e68e003ae9d9423905f7ba7c98088400c | armeb | brltty | TIM | http://autobuild.buildroot.net/results/b3f2b3187e5762dbae9e4a03064ed83083f289b4 | powerpc64 | brltty | TIM | http://autobuild.buildroot.net/results/50be1bc0a55a7e790bf85311e43ed666d57b3b70 | mipsel | brltty | TIM | http://autobuild.buildroot.net/results/02f214408e2a78ecbf74e6b350ddc35dce0e23fb | microblaze | brltty | TIM | http://autobuild.buildroot.net/results/2f99d23699048a55220ae8f521819a9212c80096 | microblaze | coremark-1.01 | NOK | http://autobuild.buildroot.net/results/525a782000738e9dd2a61302b69f68d631887178 | sh4aeb | coreutils-9.1 | NOK | http://autobuild.buildroot.net/results/1b7db739b51f2b01fb03deb3565267de86e2a3cb | ORPH sparc | crun-1.5 | NOK | http://autobuild.buildroot.net/results/0af63e880d99c1d9c59e305e10545f6dc63f9810 | mipsel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/7f5d3e474d71af4c9de5ef1220a654a6713d5f04 | microblazeel | crun-1.5 | NOK | http://autobuild.buildroot.net/results/2a420c84bc1fd692830c33950b98920b8a62ed79 | x86_64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/39b4fca8f9b272a32a5d08cd48ccae6fc56e6ff5 | microblaze | crun-1.5 | NOK | http://autobuild.buildroot.net/results/e9f415e39853805d62793fec62d14bf9053ed5ab | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/58ef2ba69051f9c8477c9b5e16ea6ecbbe0ebffc | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3857258b304bb31c3a504e1e28474f51552f9a96 | arm | crun-1.5 | NOK | http://autobuild.buildroot.net/results/c20cb207a625c0fbdc5bda811839323fbfb62bf7 | arceb | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0 | aarch64_be | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79 | aarch64 | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/9d03b2567880651ee441b95ad891101d7b959cef | or1k | dahdi-linux-5c840cf43838e06... | NOK | http://autobuild.buildroot.net/results/c2aeca66514d969f8d0418b366ab7aa5679ac890 | sh4a | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/a83c9fb6c7314f80124d217f35be43610200e7b6 | ORPH mips | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bd2ac5bc418e056735fdf9cc5d15c6acdb4d89d3 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/8f53b1cbd9febab173d8c486dc6b0748681c1a5b | ORPH powerpc64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bce8a7f27508a2fcc31edcfa8e73c39ce1f4e4ee | ORPH x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/b219ff70fcefa2a4ba7a99c858a7dad1a82aea2b | x86_64 | edk2-edk2-stable202102 | NOK | http://autobuild.buildroot.net/results/c5d8e8bbe1a759cafe3126e86266daf7c5ef527a | microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5cfe6d54610970b9b6132b639d534aa65af4cf91 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/5ce5d6fc6824ce323f646100df44e129ff8ed255 | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/c95d66d80b5ad4a5b1a7060ca6afea5ffc65deba | ORPH microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/b72129bc46394b060a21e6cc130417c021f7dde5 | ORPH microblazeel | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/0fe1deb8e713e70bb49b5ab6e45a7cd59b42863e | ORPH powerpc64le | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8e241adaad30e9af4d95eb73101b9b05ad6063b4 | powerpc64 | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/ca8b6646322a4cb911fad5fb9cb38046743609bf | mipsel | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/080e24125087c8244ab1b3d9b3fa5fbae3f46df0 | mips | file-5.43 | NOK | http://autobuild.buildroot.net/results/74dfc4380a931e36e975c5a28659eaed9f3cb6cd | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/f2061c87831df51b92248ee15d7690599b25ef53 | ORPH powerpc | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/0fdf9c83f813a94332a897e22812334fd3630b7a | powerpc64le | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/37b3921e30e3354e03bb240f92b4c5f02461b82c | i686 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/3b9b7834fae468feef574b59b89f4cb3cc76b807 | i586 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/3fb5d86aefabb3c1ce1550792d88f4d3a74bfffa | microblazeel | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/c80077fff46f75e70c54f4a1edcc8c562fa288a8 | powerpc64 | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/52cffd4a17b514872d1847f5e48a158f761c2d2e | or1k | gdal-3.5.1 | NOK | http://autobuild.buildroot.net/results/69829e3b80b1b7c56416491e0dbc949917d6eda9 | armeb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/226d48412048f38a9df74a3629cdbf4f15fef1d8 | sparc64 | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/58a90d08a7218df0c9d4df858a8418224c0aee0b | aarch64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/f807eeb2f5c96f961fcb69dec7a814ca41b5461c | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/42b02e2a61236e631669747ba93bcf862f420fca | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/d491eafc5fc623e54130eef1ccbfcd7290a0585b | riscv32 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/16513ec6a9b74a26aff2b72ed02a5173e61ff4ac | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/9717af4ee44fd558ecc8b052c8503e5de5abbff7 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/25ff9bddc0f67071d31555099502d34ea93d0029 | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/810efbb0ab431857d2ace8311f00191fa176ec08 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/f7c99deb2fa41644b3479eb34e7eca6c6fcd718f | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/892b180ca2bbeabff3ae95b55a35bd0fbaa7d375 | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c60690c535ea283eba5ef01de7060166b9a085fa | sh4eb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/c7fdfe1238bcd1efe3ac4accea63f08796af6495 | sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4c9ccb75b84d45818d04ad3aa9e4dbe1a2729d53 | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/ee77429754a9eb646274f0309ccc7f83cb01ef6b | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/d118cca989b0c3303038e6d61a6b8f185674f785 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/404bf5f8701af33f7bae6b1686f2800e16186fc0 | ORPH microblazeel | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/2933770e4869f7f552ae34979cb72c4cd8bd9e46 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0bed5cb9bf343403c660e3daab33c1fbd43a8412 | ORPH x86_64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/0ccdc546b1694f3688cf2cef4d3e28b57ea8dec3 | ORPH arm | google-breakpad-c85eb4a59b6... | NOK | http://autobuild.buildroot.net/results/f40534aafdecf5f9ab22008939a27bc1ad45b45e | i586 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/36714e14fd33a2915a0dcb3fd1cb35daaff6d803 | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/0ed921f9be8ce211cb0e498a1c57a4bc9d39a0f0 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/cee006cb0ee0485d1e5ca1164edd2ed5b582f4aa | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6f96133c969ab5954b1998573465bd396855f6b8 | armeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5abaccf29b8b4016cf3342f2ed4bf4d3830acd64 | sparc | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5ae8a6fb46bbdbf58c0142338a07d581a463a9c3 | mipsel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/930b554d140ac7c03f0dd1a441a302ad215ba63c | m68k | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8b6be1d63309b990f4acd67e82c3c589b762cec6 | microblazeel | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ff32ebcf80463421d2d78eadd4e46de3069d6553 | sh4aeb | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/4165bebe832f8c984454025d0d83e621c319ec3b | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/14b2a62ecdee4d611aee4c653778e52bbcd407cf | sh4a | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/ecdd653cb1e1a4cdec5dd93403480b700f154453 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/630d412d718789162f5351df3e673051a9d1ab81 | s390x | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/261e50c50c21aa59c4fda51f49ff70f563382257 | powerpc | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/6ccef34e715602b51fe013fab6d4875e52436b3d | microblazeel | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/3fa6010add4b03f825bc2956d567a27d474efa9a | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/33bbe6a034a0685c646ac503abe7d90fde06d559 | aarch64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/854a62b2a766d35f636f1001ffd1cb8199a46e61 | x86_64 | host-delve-1.8.0 | NOK | http://autobuild.buildroot.net/results/05c6bd338859837c8155acb0065064ff1036aee2 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/6e3d66c9b3ae02eee50d56fe57fe5a5eab6fcd29 | microblazeel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bcdbb6b30748c7b10c3e202b3cefc45166eeb139 | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/881a9a1195cd751bc2117ecfd85ba4c4a63dd2d1 | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/bbe30d9795dade202281221e4e2daef0f8f3073c | powerpc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8b983339daf4165784e762858366cf0391449e2d | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4a008ffc39539a42fbb446f7300e4e72f0b68184 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b6b2311d0ebb3c408f97311c18629176d3373b26 | arc | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/332b5f502cb20bda2e97709222499e2ef1573b54 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a3f5d651bfa7773c28a733d302a288d7e0ac0418 | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/9c1d2b7a37a762d2fdb3fccd468b52303daa32c0 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4477cc2abd8e17a16fc7eb6da6c1d9aaec87c0e8 | or1k | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/863e6a0f89e32ed5a5e2510475a2325349f4af8e | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/19a136708dc7d27eae1a3e77496e957fb51e19de | xtensa | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/49c58a9e59f199a7b8ce2acbf39325b9f801f8d0 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c4299f0aa4b333812d2a5d449de7f646109fe497 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/5ae83dc81551aa42df06d21563a0cddba992a54a | x86_64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/75ef709d287f58f4b2fda805950120ccf45b9e05 | sh4 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8a5adaf6649c1c1f3cd8dac4ad90a63c96bee751 | mipsel | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/b2d4265b83c7d49d9d1002bf4068a7f99a7a4dbc | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/85f1caf23c4f33ce4db5760eef17903dc07a0f03 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d9ca80ef3a841d2c9e02939fce1723d5a85c78b5 | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/c55bfd64282e008008950ec8e035a5650dba2faa | armeb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/810275033ef6a257a6eaec7717edbba949ed14c9 | sparc64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/d51899ff8dd1145f51b6afafeee163fc4dcc6133 | i686 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/0c164cb5f06fdc0f284ce6014d79dde343c8da15 | arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/7a3d0fdc64185bc0cbb633766aba10d9955f430b | ORPH arceb | host-gdb-arc-2020.09-releas... | NOK | http://autobuild.buildroot.net/results/ffbfd6a3d256a9b32ad86b0a659daa215b0c7f36 | ORPH mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/1d46801b72cf911caa7b64f297757fe7711e1f59 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/e127a89367f95e812c210d1aca8b148d6e322aa0 | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/3c49787e8c36fb42a280c9bf1a4b2132c8b5d4a4 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/5570acab8cd73a711c1c32bc74e129ed35c3d8c9 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/04cc8008c76b85d9a925e9a4b4309837728eecc7 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/a12f8dfdfb6138fc9c37bfc1e7af5d10e10dc18f | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/1bbfe982e6469ca9408ee9c48cbfef472e78bf7f | aarch64 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/acc932b042ceb8eb2514f3c96f423a89b52742b5 | i686 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/00ab6c6e8ecb63f82c81eae50d716c562f422508 | m68k | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/30a28df85af6288559d413d5d8fd4514c0f8fa40 | or1k | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/ae61bdb808d81d3144baa908c771e65d60d0b995 | riscv32 | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/ab8b75eee5e0a5389d006580581d7d4b65501b92 | sh4aeb | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e1fde334b14b15ec11bd93e2ada07c742be3c9d9 | riscv64 | host-runc-1.1.4 | NOK | http://autobuild.buildroot.net/results/add0a55aeb836d617099f0721e413cea1e310266 | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f19ffff903fd833bb05de3fafda5ffc5374a794a | s390x | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/d0d0ebfe45e260152519770323823aa3604c1b46 | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/f53c5b96ddd9ed9264a784c9f2e128b9f058e2a9 | nios2 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6c769b7a00e4e41e4bd989c85b34bc98f3e964e3 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/21cd591ea6421c5003f83da997a72bb9b9fb4df4 | arc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/672be05f17a7a16dabaa7b48835939b8be035680 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/eff6eff2736e15e2a9eb438b34bf0d3105c7bd20 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/16c193ef47533844224d02face08a15fc96d9e57 | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/188ebbf00b591d2f288ecaedbcfc45904f84a5f2 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/63309b8152ce8546225f371227d857805e3c3612 | mips | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6504529a3d2761633799afdc866b232170b8459d | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/25702894cd07bf1149775e650991d5b90fdeb23d | powerpc | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/f47514dbfa710c623b4006ceb6b417df2709252b | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/d27bf227d50ea8180c0a04f49e276ab26dd50477 | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/92f5536369f74fbc949017db3a540f12b8d3f028 | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/8fb340f5606695dfc4c684bda2090e17899e98ee | mipsel | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/9b91652916e41b2d7cd36b1534f5e0aeeb4d551b | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/daad80010654253c5c4edbfe520c8e01b0e808a0 | or1k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a56c3f6c52f169c9b6a8ffd8c78b85ea2154af1d | powerpc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/20f13fcead0a12c261e9344fcf79cd3f58f73eec | aarch64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/6eb322a7b8553f38105b938dacc9f86c75d321a9 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/4e17e703f51a0e2c40f4fae4002d1c93254dfc54 | microblaze | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/da9ff9ba70f14f4c66af2729f378fee57871c1ce | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/37987b2a6723cb82973a91219460b7e0aaea9f08 | ORPH i686 | host-wine-7.0 | NOK | http://autobuild.buildroot.net/results/00a4df4f371441181b780966ae74b57f24b6c242 | sh4 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/c48483ca25818696eedb59fc4418c55fd3a8dd12 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/e73080a26532ceb7640f2b04bbf2b3257c57dde5 | mipsel | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/cb1833e6d8d5d669ec0f75b717150e36640c15e8 | sparc | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/186b743da18963c06a42835b89dca85e69fe6bd9 | sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1989b1731ad1c81ffa719fc1825a7d310ad6b29d | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/835779a59c212bfc6df55ecd2c4edd87519d7b40 | ORPH arceb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1bbc4c0c74db4eeb06e605267bdb974b8a231d2c | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/9651fc548c0d57d7624adf06ba0c677c468fbf48 | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/1e9682e165a35b7c32585e3988c4986d63522b52 | ORPH microblaze | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/e0ff7b25d82b8e915ef03cf85cfdc53a2c9618e6 | ORPH mipsel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/edc5e3b04ce6ba40eabcc2a7e391b0d05ac05485 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/63afe69f5e953ba1f28719a59074487a589a631a | ORPH powerpc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/357bc050db19f28b5fd13272a3acd2becf78603d | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ff8290e31355df13617a6b8730e44d6aaa687ab1 | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/a754a29ea156105276d3d5426c5b8e6dec77a8ad | ORPH microblazeel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/0a0572ef699a2d49539f3837c168e1281091571a | ORPH sparc64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ea23167f2b1b6c64309f23ef1511f4bf2177bd18 | ORPH nios2 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/5f3f5cb05896612bebef67cbb5e8e71041e5bb6a | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/249b11bae9b966c5c0f226db31cb6a7d0c60a82d | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/dae0763d5b66f51872fbafd5b6b5f9239c5b74c2 | ORPH mipsel | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/c6d128f3b6a854d5e902e25b19fc947983994f2b | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/2a3a32ff0bf541789d010e722d440da5b137ba99 | ORPH arc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/556fd1203788f53d981e3740f3259886616f77f2 | ORPH sh4aeb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/ccc9390e8852c3fecfcb5724b89d6e87e9e9912a | ORPH powerpc64le | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/b27e94e6853989098552bde4ef78e71732d98623 | ORPH i686 | ipmiutil-3.1.8 | NOK | http://autobuild.buildroot.net/results/068b65189c163f69eaa142f705e068cfb9316535 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/8dc88bdca0dfb5a04f61d30ff2f963d40f2b5112 | riscv64 | json-c-0.16 | NOK | http://autobuild.buildroot.net/results/8d761820e1261dedceda8979ad6ade31d3359d9f | mips64el | libapparmor-3.0.4 | NOK | http://autobuild.buildroot.net/results/17cabe6a598b32e1ff5510c211d2921bf86091f1 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/afbdbc3c232deafa7215ab9560530dde38f03f66 | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ca8af5f602fd23a91e3a5bcf99573d780f6f05ca | sh4aeb | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/2f3635d31fe74ef81562d87623b37285be0885c6 | s390x | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/9c1d0fec1ff932de03d562aa1b43921270a6bece | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/46e93c47b70712fc2b0a1f0dd8ad03a4655ea640 | nios2 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/243e455e630137c72393d242c7861f5aa7218142 | arc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/9b27298246f74ec278f88df4b06ba23b536d9387 | arm | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e96f2aaa52bfe1d7e92547ae59d8478ef1a7af98 | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ec9c31d1ef1a68b584dfae362386ea350af5e5b3 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/3cc0ab42153e48824e5ee65c3c7bf09c0ee64432 | s390x | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/56cde370c30ed4c3aaa9aae35ab87e7d8967396f | mipsel | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/cccc29cfa74a285381f9ab309b15fa8739b93048 | sparc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a28572304faeea97d44af43fdc9e41283d486ea1 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/0f6d5163f69181b57db63ebeed3052d946d34bc2 | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/77ac4b4ceb72cfc656edaa098bffb5ee0a383d14 | arc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/db18a8139712bea7751eee012c67a17710e3efdc | mips | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/226db7ecaf55be8a703c7a585373c9bd0458ff34 | arceb | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/d2cd4305a387d642594d6aa32efde25f620d97a0 | powerpc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e5f97029b080b5b76fa59624ee1a3fed7ce2e621 | microblazeel | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/65559559425dd0d7764725be6baf91758c6cabfd | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/814dd72ac50092d218922166932d8433b920c197 | armeb | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/c965bb762f949dfc80066d631d28badf46f78381 | aarch64 | libdeflate-1.12 | NOK | http://autobuild.buildroot.net/results/ecd08ad970da0bdc7428b7f9ae5deebb0d617579 | i686 | libgcrypt-1.10.1 | NOK | http://autobuild.buildroot.net/results/eedbcd542e8690b42ef79b9af1505a1c986340df | ORPH arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/9062017e0bc761e416a4d071d7874745a7ef75da | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/2a797f0a91377a05fe621d0a5bcfd2b7403b4a4b | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/ae591548efeab20c85ac182f9bf4b5bca8e16139 | ORPH mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/a5e63604cd2c6aae4a86e0ea3d1967ce02647b79 | ORPH nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/08ab4cbf1f123062cbbc83bb36d335fc2d7be877 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a70ac5973f8a24d4965c0a73c7fa5dd833585392 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/b2986f4090993ec1d4ced82093a99761a57777d8 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/56bafafd49837bb2210e0f55dd1c51fa5e52df88 | powerpc64le | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ce4e83e26a5cac950231ae06970c9cd3b43d7d4f | microblazeel | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6ffe577378f17ea3e010d293dd4a2e92b972e5cb | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f38dac8173197cd4d9399a413f403467536beeed | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/79239df7d6af4bacf51976746c838260f285f8d0 | i686 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/3c938d4bc15ded09bd86c03d6db37fb879463edd | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/298a31b242e3d45d04fdbeb0311c63e77de9adc1 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f61c80514cf303fd71f0be3915900e6cc981159d | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/c0d8f56969fa14423806c83b2e5a92bee91b4070 | mips64 | libpcap-1.10.1 | NOK | http://autobuild.buildroot.net/results/c0783fa76546276534a45103372cd137a4418a00 | or1k | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/85fb2cb7fe4f63fd85ae127fb4934a0fa974922d | ORPH aarch64_be | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/815b68e6ec5227ac031c0fcfccc5777e803e50b7 | ORPH x86_64 | libxml2-2.10.3 | NOK | http://autobuild.buildroot.net/results/1d641f0e880ae4d835c87de997865cfabfabd878 | nios2 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/1ff441d1d84e4e15490ebdf61c6fbcfe9304459b | ORPH sh4aeb | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/c9db57710f9dc53bc45793b3879cbb21ac1f1696 | ORPH powerpc | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/734e17c9791dba0b3a5eb10fb4ee1c8fb6536b73 | ORPH nios2 | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/590bed640b3bea55e1fa2b4679daf8e02516dc5e | ORPH mips | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/e763d65053932d74f8b0b9ac164f2d6adcf5de22 | ORPH sh4a | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/c65070dc2b9edf4f9457d119b10ee9a0a2d4fcfa | ORPH mips64 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/ab861babc7efbfe48a9a78e7b20368da147bac83 | ORPH nios2 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/6a9e4dd6ad8e3b9dd69eb5f1748f2446935b6d33 | ORPH s390x | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/bcaeefe023ab934b7fd83f79d52a9afa26e0a137 | ORPH i686 | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/e56411a0b0fd36c002b0b8139f294506bda27b7b | ORPH arm | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3d02d83d597b619c99882f54b7be29d43c5309a2 | ORPH arc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/f0b08ba4329aa513a57fddb28f56b1dbb2e51731 | ORPH i686 | linux-pam-1.5.2 | NOK | http://autobuild.buildroot.net/results/bcf0568d16765210b8b09ddd755ff3505456eca7 | ORPH mips | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/f8c5bc3d14c6cd9a7a89866b1a6b048a8da2db34 | sh4 | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/98cc8b67171ca8d7adf8b1d777f7682b8edab09f | x86_64 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/9569c72bc5b10c1a16f194550d8259bb6b88afc3 | mips | lttng-modules-2.13.1 | NOK | http://autobuild.buildroot.net/results/5b6400aa6099da8722e6607277a03a4cc6951dc4 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/01841fde1448a03b7e9c97126fcc3d79ac380d8d | mips | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/077a21a3d2d95b5b44f872154771dcf69293ac35 | powerpc64le | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/c6d4749cf0e9281ef3c3b0aa86b2aed86fb86c75 | mips64 | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/3154f1f65878cb08d8d2f9c20000f5e55257c1ce | ORPH powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/21f91531ce60dfd020ea47150150c9d5320360f6 | microblazeel | ntpsec-1_2_1 | NOK | http://autobuild.buildroot.net/results/b13fc5fc61bef5c4eb5d962a91964267d4901907 | ORPH riscv32 | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/a6227df547857ce98ecce38b9e779e682bc415e5 | ORPH sparc64 | openpgm-5-3-128 | NOK | http://autobuild.buildroot.net/results/ce403baa9e2825f73ca0d4367f8c5a4e31d44ab7 | m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/df821eb8993439931e9388ea4f89b385507bfb34 | ORPH x86_64 | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/3ccd67331b0a8b53abe98cef122135f55e7496c1 | xtensa | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/98f44fc501195a6c42c263ef998974fd02862876 | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/cac8de34db9fdb23f485d9591a5409ec6ddd066a | arceb | perl-5.34.1 | NOK | http://autobuild.buildroot.net/results/375d379b2cb53ddbbea0ccf9de778a5f7c870267 | microblaze | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/767fb5f777da26e0bc69e93c46b152a4d990fbca | ORPH microblaze | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/60e45e0193ecf0eb8e2ee997d17b048f7f70b77f | ORPH nios2 | python-ujson-5.2.0 | NOK | http://autobuild.buildroot.net/results/ce1d9dfe61369c82dc78a5709201f4b8b6fb1cf2 | mips | qemu-7.1.0 | NOK | http://autobuild.buildroot.net/results/52636ab1754844d6f05ad83cf895885147e983c7 | sh4aeb | quickjs-2021-03-27 | NOK | http://autobuild.buildroot.net/results/9129443fd0d2978ec94cb4cd926bd0ec8d90e2ef | x86_64 | rabbitmq-server-3.8.2 | NOK | http://autobuild.buildroot.net/results/2fd3ac98f717969f74db9730be24d5fa582cf2f6 | sparc64 | rtl8189fs-94a61cbf46ce87b7c... | NOK | http://autobuild.buildroot.net/results/033bc943471898a71f0fe2779642b407106a29ce | powerpc64le | rtl8723ds-76146e85847beb242... | NOK | http://autobuild.buildroot.net/results/d48b4eb65ef2e1b149f4ba9de48c9c5ac795ba73 | mips64 | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/fb7ae85a850419ec6d264c3cee8cc2add65d9114 | ORPH riscv32 | systemd-250.4 | NOK | http://autobuild.buildroot.net/results/69ae53c8c9765942514209200ebeecf585c4387a | mips64 | toolchain-external-codescap... | NOK | http://autobuild.buildroot.net/results/9c24a220d093950965329300396799ac3bb91351 | ORPH powerpc | traceroute-2.1.0 | NOK | http://autobuild.buildroot.net/results/df0a4036b1d1de5a23dc85f9abf6736649f1a098 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/f0a44d9127500ee836ba84178e019e256c70a4f9 | powerpc | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/8d5d33c9ce03ac23f2e0f78c5357bd6f5c5aef75 | mips64 | uclibc-ng-test-6790eafe897b... | NOK | http://autobuild.buildroot.net/results/7f1a47cea7c05d9217a515c04faf2487220ec846 | mips64el | unknown | NOK | http://autobuild.buildroot.net/results/8690f39f7ac9c7a09ca64f4596508b19756e8970 | s390x | unknown | NOK | http://autobuild.buildroot.net/results/766f9a109e35d16e190dd4f839ebca80fbab92fa | riscv64 | unknown | NOK | http://autobuild.buildroot.net/results/0e34ca3d412d7c0e12a6aa78b4181589cf0a72d9 | mips64el | valgrind-3.19.0 | NOK | http://autobuild.buildroot.net/results/755abd894d26b72d9c6c95626931d71a4b6afd58 | ORPH powerpc | volk-2.5.2 | NOK | http://autobuild.buildroot.net/results/f381393593bd3622e123279383006d1d4a4c0a02 | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/fabc71cc307d1371bcad3a6b4d0e68334bce9e5d | mips64 | wolfssl-5.5.1 | NOK | http://autobuild.buildroot.net/results/5796bd3d3c1857d47de2cf6efd39d6e27c41c756 | microblazeel | xenomai-3.0.10 | NOK | http://autobuild.buildroot.net/results/2303a1621ea91f61541279461a899d8e306de743 | aarch64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/e79a55b5e7251829008a4af40b67bed8bbc4b661 | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/a3b5c7b519d29398116c228dbe99544ac47cdc88 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/bcedca23c7dd6127497e4443e4cc7e59dfdb7473 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d2d7c7e273e135d01a13b0afcf4f8b715ff162c0 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/d13b6e04220e4c70726e30bbf08f729585d46652 | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/6e1b1ed0f4d49c74f98646b7a7fb2d270110df1b | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/ff279644b73e6f1bf6d3d64d41a4dc1ea933e849 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/bea5803810284d7a40bc1be8f197ab3fe21ddc16 | ORPH microblaze | zstd-1.5.2 | NOK | http://autobuild.buildroot.net/results/1c01579e4e4d368e47ccef805601549e301e0e9d | Classification of failures by reason for 2022.08.x -------------------------------------------------- openssh-legal-info | 4 host-rust-1.62.0 | 2 crucible-2022.05.25 | 1 dhcp-4.4.3 | 1 host-go-1.18.6 | 1 igd2-for-linux-2.1 | 1 libglib2-2.72.3 | 1 pistache-3ec9d7c4f8b828fdd3... | 1 tcf-agent-1.7.0 | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- s390x | crucible-2022.05.25 | NOK | http://autobuild.buildroot.net/results/4b5bd8dd9947edbd59471b85b652db0fce830f17 | xtensa | dhcp-4.4.3 | NOK | http://autobuild.buildroot.net/results/11a8b2503be3f38e11461cb6c1caf514e2624a6a | ORPH mips64el | host-go-1.18.6 | NOK | http://autobuild.buildroot.net/results/143b3580a979cc39c9c0b9787b469348ae63c358 | s390x | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/bc23af27436a7bf7a5eb6b898cf976a11998665b | sparc64 | host-rust-1.62.0 | NOK | http://autobuild.buildroot.net/results/50c5aa131127849b2c7d748ab17d43bc832efc5b | sparc64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/40d6e0aa3bdd0d268fce05c8ed81bcd55bc79ea7 | arceb | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/10a3f871cbb94a0a02f7e752f610d9f29953b6d0 | sh4aeb | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/199ad0d27ec15342dfe358b76ac6a6417f8a4d02 | ORPH microblaze | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/657199763f44d433c9b247f7f6cb678c488990ff | ORPH s390x | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/b15e8473dbf447e16b77f183543b90cc60306d00 | ORPH or1k | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/f695c24d6e013a0566af0baf44eb74b1b2d7671b | ORPH powerpc | pistache-3ec9d7c4f8b828fdd3... | NOK | http://autobuild.buildroot.net/results/30f204acd57622ceb99c86291a40bb9235166e32 | ORPH microblazeel | tcf-agent-1.7.0 | NOK | http://autobuild.buildroot.net/results/c4133c219dde89abf9a89fea6cf71de172c2eee7 | sparc64 | unknown | NOK | http://autobuild.buildroot.net/results/7d51f6677cc21bd2bd5ecad792e7ff6ab0867682 | -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Sun Oct 30 08:30:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 09:30:33 +0100 Subject: [Buildroot] [PATCH 1/1] package/gcc: ensure __register_frame is optimized out for glibc In-Reply-To: <20221028223844.1180418-1-james.hilliard1@gmail.com> References: <20221028223844.1180418-1-james.hilliard1@gmail.com> Message-ID: <20221030083033.GC1058960@scaer> James, All, On 2022-10-28 16:38 -0600, James Hilliard spake thusly: > On some architectures when building with -O0 the __register_frame > symbol fails to get optimized out which can cause linking failures > when building glibc. > > To fix this set -O1 for GCC target libs when building with glibc > and BR2_OPTIMIZE_0 on the problematic target architectures. > > Fixes: > - http://autobuild.buildroot.net/results/89b/89b6c6924240b7cf82035a844f3573673e91b364 > - http://autobuild.buildroot.net/results/46f/46f4ec99d2b23d354a4bb5e92123d64f0da6ed27 > - http://autobuild.buildroot.net/results/839/839f929f700cf181ebdf34389c7806a96f55813e > - http://autobuild.buildroot.net/results/0e2/0e202bf53a683930f3cad6edef2a4dea629eaecb > - http://autobuild.buildroot.net/results/8a8/8a8c917f597fdcca744e696e19e9300b64004335 > - http://autobuild.buildroot.net/results/c05/c058b27ed2834dfa633b63ec6c3639ab1e8bf412 > - http://autobuild.buildroot.net/results/8ba/8ba8882a861cf7df359c23969c09b2be0725b2e5 > > Signed-off-by: James Hilliard > --- > package/gcc/gcc.mk | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/package/gcc/gcc.mk b/package/gcc/gcc.mk > index ec6f3b550a..a339f77970 100644 > --- a/package/gcc/gcc.mk > +++ b/package/gcc/gcc.mk > @@ -103,6 +103,15 @@ GCC_COMMON_TARGET_CFLAGS += -matomic > GCC_COMMON_TARGET_CXXFLAGS += -matomic > endif > > +# Enable GCC target libs optimizations to optimize out __register_frame > +# when needed for some architectures when building with glibc. > +ifeq ($(BR2_TOOLCHAIN_USES_GLIBC)$(BR2_OPTIMIZE_0),yy) > +ifeq ($(BR2_microblazebe)$(BR2_microblazeel)$(BR2_mips)$(BR2_mipsel)$(BR2_nios2)$(BR2_or1k)$(BR2_sh),y) > +GCC_COMMON_TARGET_CFLAGS += -O1 > +GCC_COMMON_TARGET_CXXFLAGS += -O1 > +endif > +endif Should this not be limitied to the intial compiler only? Otherwise, why would we need it for the final compiler? Regards, Yann E. MORIN. > # Propagate options used for target software building to GCC target libs > HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)" > HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)" > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yegorslists at googlemail.com Sun Oct 30 09:11:56 2022 From: yegorslists at googlemail.com (Yegor Yefremov) Date: Sun, 30 Oct 2022 10:11:56 +0100 Subject: [Buildroot] [PATCH] python-pycrate: new package In-Reply-To: <20221029080229.GA24217@smart-All-Series> References: <20221025065539.4646-1-afshin.nasser@gmail.com> <20221026102255.GA602@smart-All-Series> <20221029080229.GA24217@smart-All-Series> Message-ID: Hi Nasser, On Sat, Oct 29, 2022 at 10:02 AM Nasser Afshin wrote: > > Hi Yegor, > > On Wed, Oct 26, 2022 at 08:21:30PM +0200, Yegor Yefremov wrote: > > Hi Nasser, > > > > On Wed, Oct 26, 2022 at 12:23 PM Nasser Afshin wrote: > > > > > > Hi Yegor, > > > > > > Thankyou for taking time to review my patch. > > > > > > On Tue, Oct 25, 2022 at 10:33:19AM +0200, Yegor Yefremov wrote: > > > > Hi Nasser, > > > > > > > > On Tue, Oct 25, 2022 at 8:55 AM Nasser Afshin wrote: > > > > > > > > > > Signed-off-by: Nasser Afshin Reviewed-by: Yegor Yefremov Best regards, Yegor > > > > > --- > > > > > package/Config.in | 1 + > > > > > package/python-pycrate/Config.in | 8 ++++++++ > > > > > package/python-pycrate/python-pycrate.hash | 4 ++++ > > > > > package/python-pycrate/python-pycrate.mk | 13 +++++++++++++ > > > > > > > > An entry to the DEVELOPERS file is missing. > > > > > > May you help me to whome this entry should refer? > > > > You should add yourself as a "maintainer" of the package you add. Just > > look at other entries. > > > I have added myself as a maintainer of this package. Thankyou. > > > > > > > > > > > > > 4 files changed, 26 insertions(+) > > > > > create mode 100644 package/python-pycrate/Config.in > > > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > > > > > diff --git a/package/Config.in b/package/Config.in > > > > > index 56b1a08d8b..2443b7bb27 100644 > > > > > --- a/package/Config.in > > > > > +++ b/package/Config.in > > > > > @@ -951,6 +951,7 @@ menu "External python modules" > > > > > source "package/python-pyasn1-modules/Config.in" > > > > > source "package/python-pycli/Config.in" > > > > > source "package/python-pycparser/Config.in" > > > > > + source "package/python-pycrate/Config.in" > > > > > source "package/python-pycrypto/Config.in" > > > > > source "package/python-pycryptodomex/Config.in" > > > > > source "package/python-pydal/Config.in" > > > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > > > new file mode 100644 > > > > > index 0000000000..9e2123d4dd > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/Config.in > > > > > @@ -0,0 +1,8 @@ > > > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > > > + bool "python-pycrate" > > > > > + help > > > > > + It provides basically a runtime for encoding and decoding data structures, > > > > > + including CSN.1 and ASN.1. Additionally, it features a 3G and LTE mobile core > > > > > + network. > > > > > + > > > > > + https://github.com/P1sec/pycrate/ > > > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > > > new file mode 100644 > > > > > index 0000000000..24aa51d8e4 > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/python-pycrate.hash > > > > > @@ -0,0 +1,4 @@ > > > > > +# md5 from https://pypi.python.org/pypi/pycrate/json > > > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > > > +# Locally computed > > > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > > > new file mode 100644 > > > > > index 0000000000..41ce6c18f2 > > > > > --- /dev/null > > > > > +++ b/package/python-pycrate/python-pycrate.mk > > > > > @@ -0,0 +1,13 @@ > > > > > +################################################################################ > > > > > +# > > > > > +# python-pycrate > > > > > +# > > > > > +################################################################################ > > > > > + > > > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > > > +PYTHON_PYCRATE_SETUP_TYPE = distutils > > > > > > > > SETUP_TYPE is setuptools. > > > > > > > > Have you tried this command? > > > > > > > > ./utils/scanpypi pycrate > > > > > > > > It will do almost everything you need. The thing that is missing is > > > > licensing info because there is no license file in the source archive. > > > > > > Thankyou for pointing this out. Now I send a new version, using this > > > command and also adding licensing info. > > > > > > > > Best regards, > > > > Yegor > > > > > > > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1-or-later > > > > > + > > > > > +$(eval $(python-package)) > > > > > -- > > > > > 2.17.1 > > > > > > > > > > > This is the second version of my patch. > > > > > > From 979beabd86f1c15d159e37136bc9591fb39b844e Mon Sep 17 00:00:00 2001 > > > From: Nasser Afshin > > > Date: Tue, 25 Oct 2022 16:06:53 +0330 > > > Subject: [PATCH v2] python-pycrate: new package > > > > > > Signed-off-by: Nasser Afshin > > > --- > > > v1 -> v2: Added licence file and its checksum > > > Used ./utils/scanpypi pycrate tool to be consistent with > > > others > > > > > > package/Config.in | 1 + > > > package/python-pycrate/Config.in | 6 ++++++ > > > package/python-pycrate/python-pycrate.hash | 6 ++++++ > > > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > > > 4 files changed, 27 insertions(+) > > > create mode 100644 package/python-pycrate/Config.in > > > create mode 100644 package/python-pycrate/python-pycrate.hash > > > create mode 100644 package/python-pycrate/python-pycrate.mk > > > > > > diff --git a/package/Config.in b/package/Config.in > > > index e3a34d6e97..a6fcc72cc8 100644 > > > --- a/package/Config.in > > > +++ b/package/Config.in > > > @@ -1168,6 +1168,7 @@ menu "External python modules" > > > source "package/python-pycairo/Config.in" > > > source "package/python-pycares/Config.in" > > > source "package/python-pycparser/Config.in" > > > + source "package/python-pycrate/Config.in" > > > source "package/python-pycryptodomex/Config.in" > > > source "package/python-pycups/Config.in" > > > source "package/python-pydal/Config.in" > > > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > > > new file mode 100644 > > > index 0000000000..193a973f7e > > > --- /dev/null > > > +++ b/package/python-pycrate/Config.in > > > @@ -0,0 +1,6 @@ > > > +config BR2_PACKAGE_PYTHON_PYCRATE > > > + bool "python-pycrate" > > > + help > > > + A software suite to handle various data formats. > > > + > > > + https://github.com/P1sec/pycrate/ > > > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > > > new file mode 100644 > > > index 0000000000..8ad33370b4 > > > --- /dev/null > > > +++ b/package/python-pycrate/python-pycrate.hash > > > @@ -0,0 +1,6 @@ > > > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > > > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > > > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > > > +# Locally computed > > > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > > > + > > > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > > > new file mode 100644 > > > index 0000000000..c0da152656 > > > --- /dev/null > > > +++ b/package/python-pycrate/python-pycrate.mk > > > @@ -0,0 +1,14 @@ > > > +################################################################################ > > > +# > > > +# python-pycrate > > > +# > > > +################################################################################ > > > + > > > +PYTHON_PYCRATE_VERSION = 0.5.5 > > > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > > > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > > > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > > > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > > > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > > > + > > > +$(eval $(python-package)) > > > > The patch looks good now. Thanks. > > > > Best regards, > > Yegor > > This is the third version of the patch: > > From de6e28885836a6d9a5347a083a68055098508583 Mon Sep 17 00:00:00 2001 > From: Nasser Afshin > Date: Tue, 25 Oct 2022 16:06:53 +0330 > Subject: [PATCH v3] python-pycrate: new package > > Signed-off-by: Nasser Afshin > --- > v1 -> v2: Added licence file and its checksum > Used ./utils/scanpypi pycrate tool to be consistent with > others > v2 -> v3: Added myself as the maintainer of this package > > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/python-pycrate/Config.in | 6 ++++++ > package/python-pycrate/python-pycrate.hash | 6 ++++++ > package/python-pycrate/python-pycrate.mk | 14 ++++++++++++++ > 5 files changed, 30 insertions(+) > create mode 100644 package/python-pycrate/Config.in > create mode 100644 package/python-pycrate/python-pycrate.hash > create mode 100644 package/python-pycrate/python-pycrate.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index 6e0b765ba1..a1b48fd45c 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2157,6 +2157,9 @@ N: Murat Demirten > F: package/jpeg-turbo/ > F: package/libgeotiff/ > > +N: Nasser Afshin > +F: package/python-pycrate/ > + > N: Nathaniel Roach > F: package/bandwidthd/ > F: package/libgudev/ > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..a6fcc72cc8 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1168,6 +1168,7 @@ menu "External python modules" > source "package/python-pycairo/Config.in" > source "package/python-pycares/Config.in" > source "package/python-pycparser/Config.in" > + source "package/python-pycrate/Config.in" > source "package/python-pycryptodomex/Config.in" > source "package/python-pycups/Config.in" > source "package/python-pydal/Config.in" > diff --git a/package/python-pycrate/Config.in b/package/python-pycrate/Config.in > new file mode 100644 > index 0000000000..193a973f7e > --- /dev/null > +++ b/package/python-pycrate/Config.in > @@ -0,0 +1,6 @@ > +config BR2_PACKAGE_PYTHON_PYCRATE > + bool "python-pycrate" > + help > + A software suite to handle various data formats. > + > + https://github.com/P1sec/pycrate/ > diff --git a/package/python-pycrate/python-pycrate.hash b/package/python-pycrate/python-pycrate.hash > new file mode 100644 > index 0000000000..8ad33370b4 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.hash > @@ -0,0 +1,6 @@ > +# md5, sha256 from https://pypi.org/pypi/pycrate/json > +md5 075622d5d573274cd4dbfe268ca52f7f pycrate-0.5.5.tar.gz > +sha256 59f09331890a389a6b98412f19f4fb021c5a75a35ab07bf5ba0d1e299a0967af pycrate-0.5.5.tar.gz > +# Locally computed > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 license.txt > + > diff --git a/package/python-pycrate/python-pycrate.mk b/package/python-pycrate/python-pycrate.mk > new file mode 100644 > index 0000000000..c0da152656 > --- /dev/null > +++ b/package/python-pycrate/python-pycrate.mk > @@ -0,0 +1,14 @@ > +################################################################################ > +# > +# python-pycrate > +# > +################################################################################ > + > +PYTHON_PYCRATE_VERSION = 0.5.5 > +PYTHON_PYCRATE_SOURCE = pycrate-$(PYTHON_PYCRATE_VERSION).tar.gz > +PYTHON_PYCRATE_SITE = https://files.pythonhosted.org/packages/25/8f/b3d7e0b541aa04b2f0f7aa694a6946b572bfa2e2627cf1f12b5416d633df > +PYTHON_PYCRATE_SETUP_TYPE = setuptools > +PYTHON_PYCRATE_EXTRA_DOWNLOADS = https://raw.githubusercontent.com/P1sec/pycrate/master/license.txt > +PYTHON_PYCRATE_LICENSE = LGPL-2.1+ > + > +$(eval $(python-package)) > -- > 2.17.1 > From fontaine.fabrice at gmail.com Sun Oct 30 09:27:49 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:27:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/jack2: bump to version 1.9.21 Message-ID: <20221030092749.43292-1-fontaine.fabrice@gmail.com> https://github.com/jackaudio/jack2/releases/tag/v1.9.21 Signed-off-by: Fabrice Fontaine --- package/jack2/jack2.hash | 2 +- package/jack2/jack2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/jack2/jack2.hash b/package/jack2/jack2.hash index 6361473cf7..c98971ca1c 100644 --- a/package/jack2/jack2.hash +++ b/package/jack2/jack2.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 915ad2900992159bdb729b9fc4ea134b962ce32b2df0b384fee40a2c5808835d jack2-1.9.20.tar.gz +sha256 8b044a40ba5393b47605a920ba30744fdf8bf77d210eca90d39c8637fe6bc65d jack2-1.9.21.tar.gz sha256 d8c320ffc0030d1b096ae4732b50d2b811cf95e9a9b7377c1127b2563e0a0388 COPYING diff --git a/package/jack2/jack2.mk b/package/jack2/jack2.mk index 9d6a3b6479..f7683304a6 100644 --- a/package/jack2/jack2.mk +++ b/package/jack2/jack2.mk @@ -4,7 +4,7 @@ # ################################################################################ -JACK2_VERSION = 1.9.20 +JACK2_VERSION = 1.9.21 JACK2_SITE = $(call github,jackaudio,jack2,v$(JACK2_VERSION)) JACK2_LICENSE = GPL-2.0+ (jack server), LGPL-2.1+ (jack library) JACK2_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:28:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:28:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpagekite: bump to version 0.91.201110 Message-ID: <20221030092832.43581-1-fontaine.fabrice@gmail.com> https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 Signed-off-by: Fabrice Fontaine --- package/libpagekite/libpagekite.hash | 2 +- package/libpagekite/libpagekite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libpagekite/libpagekite.hash b/package/libpagekite/libpagekite.hash index 8716b991ca..2c2e5c9b59 100644 --- a/package/libpagekite/libpagekite.hash +++ b/package/libpagekite/libpagekite.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c812815aae6f100212b7d6f662370a0634151fabb59f028126a59c4083a6d26d libpagekite-0.91.190530.tar.gz +sha256 db835d49becebc00d462f2f47aefc1f1d3a4e0e096487cb3b4248134185df715 libpagekite-0.91.201110.tar.gz # License files, locally calculated sha256 ba443b9c9d4273d06aae3e147e9ad1ec199cc9c23455f486a039536d47f57eed doc/COPYING.md diff --git a/package/libpagekite/libpagekite.mk b/package/libpagekite/libpagekite.mk index 60b62f5cfd..bb235ba1f3 100644 --- a/package/libpagekite/libpagekite.mk +++ b/package/libpagekite/libpagekite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPAGEKITE_VERSION = 0.91.190530 +LIBPAGEKITE_VERSION = 0.91.201110 LIBPAGEKITE_SITE = $(call github,pagekite,libpagekite,v$(LIBPAGEKITE_VERSION)) # pkrelay is AGPL-3.0+ but is not built -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:41:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:41:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/libmodbus: bump to version 3.1.8 Message-ID: <20221030094155.53225-1-fontaine.fabrice@gmail.com> Switch site to get latest release https://github.com/stephane/libmodbus/releases/tag/v3.1.8 Signed-off-by: Fabrice Fontaine --- package/libmodbus/libmodbus.hash | 2 +- package/libmodbus/libmodbus.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libmodbus/libmodbus.hash b/package/libmodbus/libmodbus.hash index b676d261de..83b0c3a012 100644 --- a/package/libmodbus/libmodbus.hash +++ b/package/libmodbus/libmodbus.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7dfe958431d0570b271e1a5b329b76a658e89c614cf119eb5aadb725c87f8fbd libmodbus-3.1.7.tar.gz +sha256 b122f2bc29f749702a22c0a760a7ca2182d541f5fa26bf25e3431f907b606f3c libmodbus-3.1.8.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LESSER diff --git a/package/libmodbus/libmodbus.mk b/package/libmodbus/libmodbus.mk index 46eb860392..2f8c1735da 100644 --- a/package/libmodbus/libmodbus.mk +++ b/package/libmodbus/libmodbus.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBMODBUS_VERSION = 3.1.7 -LIBMODBUS_SITE = http://libmodbus.org/releases +LIBMODBUS_VERSION = 3.1.8 +LIBMODBUS_SITE = https://github.com/stephane/libmodbus/releases/download/v$(LIBMODBUS_VERSION) LIBMODBUS_LICENSE = LGPL-2.1+ LIBMODBUS_LICENSE_FILES = COPYING.LESSER LIBMODBUS_CPE_ID_VENDOR = libmodbus -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 09:52:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 10:52:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/liblinear: bump to version 2.45 Message-ID: <20221030095228.59110-1-fontaine.fabrice@gmail.com> Version 2.45 released on August 11, 2022. Some minor bugs are fixed. Drop first patch (not needed since https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) https://github.com/cjlin1/liblinear/compare/v244...v245 Signed-off-by: Fabrice Fontaine --- ...0001-blas-don-t-overwrite-ar-options.patch | 36 ------------------- ...-lib.patch => 0001-build-static-lib.patch} | 0 package/liblinear/liblinear.hash | 2 +- package/liblinear/liblinear.mk | 2 +- 4 files changed, 2 insertions(+), 38 deletions(-) delete mode 100644 package/liblinear/0001-blas-don-t-overwrite-ar-options.patch rename package/liblinear/{0002-build-static-lib.patch => 0001-build-static-lib.patch} (100%) diff --git a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch b/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch deleted file mode 100644 index 23ed6dd227..0000000000 --- a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cae4c3b80fee0f3637d70f6d33946888c8105637 Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Sat, 13 Dec 2014 17:16:58 +0100 -Subject: [PATCH] blas: don't overwrite ar options - -ar's rcv options get lost when AR is passed on -the command line. - -Signed-off-by: Romain Naour -Signed-off-by: Fabrice Fontaine ---- - blas/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/blas/Makefile b/blas/Makefile -index 895fd24..78cec9a 100644 ---- a/blas/Makefile -+++ b/blas/Makefile -@@ -1,4 +1,4 @@ --AR = ar rcv -+AR = ar - RANLIB = ranlib - - HEADERS = blas.h blasp.h -@@ -8,7 +8,7 @@ CFLAGS = $(OPTFLAGS) - FFLAGS = $(OPTFLAGS) - - blas: $(FILES) $(HEADERS) -- $(AR) blas.a $(FILES) -+ $(AR) rcv blas.a $(FILES) - $(RANLIB) blas.a - - clean: --- -1.9.3 - diff --git a/package/liblinear/0002-build-static-lib.patch b/package/liblinear/0001-build-static-lib.patch similarity index 100% rename from package/liblinear/0002-build-static-lib.patch rename to package/liblinear/0001-build-static-lib.patch diff --git a/package/liblinear/liblinear.hash b/package/liblinear/liblinear.hash index 27aa4e3e87..6bc72909d0 100644 --- a/package/liblinear/liblinear.hash +++ b/package/liblinear/liblinear.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 45572b99d4eeffc3e8ad7b72c27370be867edf3523c396d8b278a2c873bfbb5c liblinear-2.44.tar.gz +sha256 3c64eec45c01943a656baac7aeb8ffd782fe0aea53629aa9f5fdb8eec177c92f liblinear-2.45.tar.gz sha256 d49b7898fd9ea7c29f0478e8c409ee7c0f621533d5eca7b7912e80391dc564e3 COPYRIGHT diff --git a/package/liblinear/liblinear.mk b/package/liblinear/liblinear.mk index c100ccc6c5..014f9e2de4 100644 --- a/package/liblinear/liblinear.mk +++ b/package/liblinear/liblinear.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBLINEAR_VERSION = 2.44 +LIBLINEAR_VERSION = 2.45 LIBLINEAR_SITE = http://www.csie.ntu.edu.tw/~cjlin/liblinear LIBLINEAR_LICENSE = BSD-3-Clause LIBLINEAR_LICENSE_FILES = COPYRIGHT -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 10:09:04 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 11:09:04 +0100 Subject: [Buildroot] [PATCH 1/1] package/libnl: bump to version 3.7.0 Message-ID: <20221030100904.76419-1-fontaine.fabrice@gmail.com> https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 Signed-off-by: Fabrice Fontaine --- package/libnl/libnl.hash | 4 ++-- package/libnl/libnl.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnl/libnl.hash b/package/libnl/libnl.hash index a0f1388528..8a1bd56780 100644 --- a/package/libnl/libnl.hash +++ b/package/libnl/libnl.hash @@ -1,4 +1,4 @@ -# From https://github.com/thom311/libnl/releases/download/libnl3_6_0/libnl-3.6.0.tar.gz.sha256sum -sha256 532155fd011e5a805bd67121b87a01c757e2bb24112ac17e69cb86013b970009 libnl-3.6.0.tar.gz +# From https://github.com/thom311/libnl/releases/download/libnl3_7_0/libnl-3.7.0.tar.gz.sha256sum +sha256 9fe43ccbeeea72c653bdcf8c93332583135cda46a79507bfd0a483bb57f65939 libnl-3.7.0.tar.gz # Locally calculated sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/libnl/libnl.mk b/package/libnl/libnl.mk index d3bd185093..6896188f4d 100644 --- a/package/libnl/libnl.mk +++ b/package/libnl/libnl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNL_VERSION = 3.6.0 +LIBNL_VERSION = 3.7.0 LIBNL_SITE = https://github.com/thom311/libnl/releases/download/libnl$(subst .,_,$(LIBNL_VERSION)) LIBNL_LICENSE = LGPL-2.1+ LIBNL_LICENSE_FILES = COPYING -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:39 +0100 Subject: [Buildroot] [git commit] package/libkcapi: support building kcapi-dgst application Message-ID: <20221030104205.8ACC88745F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4ed6d61c03bf9e1ce7830bafcfeca683e6c93592 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Just add a new Kconfig option in order to support building kcapi-dgst application. Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- package/libkcapi/Config.in | 3 +++ package/libkcapi/libkcapi.mk | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8243f6b738..8f2cf7ecc4 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -8,6 +8,9 @@ config BR2_PACKAGE_LIBKCAPI if BR2_PACKAGE_LIBKCAPI +config BR2_PACKAGE_LIBKCAPI_DGSTAPP + bool "build dgst application" + config BR2_PACKAGE_LIBKCAPI_ENCAPP bool "build enc application" diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 30d500696b..c6e58c6a9b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -17,6 +17,12 @@ LIBKCAPI_CONF_ENV = \ ac_cv_path_XMLTO="" LIBKCAPI_MAKE_OPTS = CPPFLAGS="$(TARGET_CPPFLAGS)" +ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) +LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp +else +LIBKCAPI_CONF_OPTS += --disable-kcapi-dgstapp +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_ENCAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-encapp else From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:38 +0100 Subject: [Buildroot] [git commit] package/libkcapi: bump version to 1.4.0 Message-ID: <20221030104205.7C3D98745D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=06a9dc3528847ec6c12a9b6188d4106e086eabe5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Removed patch applied upstream: https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923 Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- ...use-of-__NR_io_getevents-when-not-defined.patch | 42 ---------------------- package/libkcapi/libkcapi.hash | 4 +-- package/libkcapi/libkcapi.mk | 2 +- 3 files changed, 3 insertions(+), 45 deletions(-) diff --git a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch b/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch deleted file mode 100644 index 20aa75b741..0000000000 --- a/package/libkcapi/0001-Disable-use-of-__NR_io_getevents-when-not-defined.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 455c4938f5822c017c7ff79dd2dca638b6410923 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Sun, 15 Nov 2020 18:05:48 -0800 -Subject: [PATCH] Disable use of __NR_io_getevents when not defined - -Architectures like riscv32 do not define this syscall, therefore return -ENOSYS on such architectures - -Upstream-Status: Pending -Signed-off-by: Khem Raj -Signed-off-by: Stephan Mueller -[Retrieved from: -https://github.com/smuellerDD/libkcapi/commit/455c4938f5822c017c7ff79dd2dca638b6410923] -Signed-off-by: Fabrice Fontaine ---- - lib/internal.h | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/lib/internal.h b/lib/internal.h -index 1237827..f765461 100644 ---- a/lib/internal.h -+++ b/lib/internal.h -@@ -325,10 +325,17 @@ static inline int io_submit(aio_context_t ctx, long n, struct iocb **iocb) - return syscall(__NR_io_submit, ctx, n, iocb); - } - --static inline int io_getevents(aio_context_t ctx, long min, long max, -- struct io_event *events, struct timespec *timeout) -+static inline int io_getevents(__attribute__((unused)) aio_context_t ctx, -+ __attribute__((unused)) long min, -+ __attribute__((unused)) long max, -+ __attribute__((unused)) struct io_event *events, -+ __attribute__((unused)) struct timespec *timeout) - { -+#ifdef __NR_io_getevents - return syscall(__NR_io_getevents, ctx, min, max, events, timeout); -+#else -+ return -ENOSYS; -+#endif - } - - /************************************************************ diff --git a/package/libkcapi/libkcapi.hash b/package/libkcapi/libkcapi.hash index 49b0880211..d858086408 100644 --- a/package/libkcapi/libkcapi.hash +++ b/package/libkcapi/libkcapi.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 8a08dcbb4d05ede4357cdc9d61c7f2a7f2cd96b7ce2eb41b28e45b2e378267ad libkcapi-1.1.5.tar.xz -sha256 c6b8402a68999b0f84560ab43cdf60f9ff33c4a9a8ced6a40db9d3b787ba5b4a COPYING +sha256 644b47593b3f27f08add7a8808ccdbe569a2f331d70fb8b52551e57379b917fa libkcapi-1.4.0.tar.xz +sha256 9765fad61726afb2b253db2c68153672e4178d6809667ae98141f3e90fe8645b COPYING sha256 e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4 COPYING.gplv2 sha256 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239 COPYING.bsd diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index 09c5c028bc..30d500696b 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBKCAPI_VERSION = 1.1.5 +LIBKCAPI_VERSION = 1.4.0 LIBKCAPI_SOURCE = libkcapi-$(LIBKCAPI_VERSION).tar.xz LIBKCAPI_SITE = http://www.chronox.de/libkcapi LIBKCAPI_AUTORECONF = YES From thomas.petazzoni at bootlin.com Sun Oct 30 10:41:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:41:39 +0100 Subject: [Buildroot] [git commit] package/libkcapi: support enabling lib-asym and lib-kpp Message-ID: <20221030104205.974C387460@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1ce9af6ccfa3136e62d0c429adb38460bece058f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add Kconfig options to allow enabling asymmetric cipher support (--enable-lib-asym) and key protocol primitives support (--enable-lib-kpp) in library. Signed-off-by: Tan En De Signed-off-by: Thomas Petazzoni --- package/libkcapi/Config.in | 14 ++++++++++++++ package/libkcapi/libkcapi.mk | 12 ++++++++++++ 2 files changed, 26 insertions(+) diff --git a/package/libkcapi/Config.in b/package/libkcapi/Config.in index 8f2cf7ecc4..bf9c95270c 100644 --- a/package/libkcapi/Config.in +++ b/package/libkcapi/Config.in @@ -8,6 +8,13 @@ config BR2_PACKAGE_LIBKCAPI if BR2_PACKAGE_LIBKCAPI +config BR2_PACKAGE_LIBKCAPI_ASYM + bool "build asymmetric ciphers library" + help + Using this library requires the Linux kernel to be patched + with libkcapi Linux kernel patches found in libkcapi + kernel-patches/ directory. + config BR2_PACKAGE_LIBKCAPI_DGSTAPP bool "build dgst application" @@ -21,6 +28,13 @@ config BR2_PACKAGE_LIBKCAPI_HASHER comment "hasher application needs a toolchain w/ dynamic library" depends on BR2_STATIC_LIBS +config BR2_PACKAGE_LIBKCAPI_KPP + bool "build KPP library" + help + Using this library requires the Linux kernel to be patched + with libkcapi Linux kernel patches found in libkcapi + kernel-patches/ directory. + config BR2_PACKAGE_LIBKCAPI_RNGAPP bool "build rng read application" diff --git a/package/libkcapi/libkcapi.mk b/package/libkcapi/libkcapi.mk index c6e58c6a9b..e88928a74d 100644 --- a/package/libkcapi/libkcapi.mk +++ b/package/libkcapi/libkcapi.mk @@ -17,6 +17,12 @@ LIBKCAPI_CONF_ENV = \ ac_cv_path_XMLTO="" LIBKCAPI_MAKE_OPTS = CPPFLAGS="$(TARGET_CPPFLAGS)" +ifeq ($(BR2_PACKAGE_LIBKCAPI_ASYM),y) +LIBKCAPI_CONF_OPTS += --enable-lib-asym +else +LIBKCAPI_CONF_OPTS += --disable-lib-asym +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_DGSTAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-dgstapp else @@ -35,6 +41,12 @@ else LIBKCAPI_CONF_OPTS += --disable-kcapi-hasher endif +ifeq ($(BR2_PACKAGE_LIBKCAPI_KPP),y) +LIBKCAPI_CONF_OPTS += --enable-lib-kpp +else +LIBKCAPI_CONF_OPTS += --disable-lib-kpp +endif + ifeq ($(BR2_PACKAGE_LIBKCAPI_RNGAPP),y) LIBKCAPI_CONF_OPTS += --enable-kcapi-rngapp else From thomas.petazzoni at bootlin.com Sun Oct 30 10:45:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:45:29 +0100 Subject: [Buildroot] [0/3] package/libkcapi: bump version to 1.4.0 and add Kconfigs In-Reply-To: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> References: <20221015084757.277050-1-ende.tan@linux.starfivetech.com> Message-ID: <20221030114529.607f4e73@windsurf> Hello Tan, On Sat, 15 Oct 2022 16:47:54 +0800 Tan En De wrote: > Tan En De (3): > package/libkcapi: bump version to 1.4.0 > package/libkcapi: support building kcapi-dgst application > package/libkcapi: support enabling lib-asym and lib-kpp Thanks a lot, all 3 patches applied. I did some minor changes on PATCH 2/3 and 3/3: - Alphabetic ordering in Config.in and libkcapi.mk - Improvement of the prompt of the options, moving the discussion about kernel patches into the help text of each option instead of inside the prompt (which would otherwise be too long) Also, I see we have nobody in our DEVELOPERS associated to the libkcapi package. If you're a user of this package, would you agree to be listed in the DEVELOPERS file for this package? This way, you would receive notifications when we have build failures affecting this package, and you could help us maintain its support in Buildroot moving forward. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 10:51:38 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:51:38 +0100 Subject: [Buildroot] [git commit] package/f2fs-tools: fix build with lz4 1.9.4 Message-ID: <20221030105150.CFF6B8745B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c999e540dd233f8cb52eee4c35373cd6603aea97 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure raised since bump of lz4 to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compress.c: In function 'lz4_compress_init': compress.c:36:42: error: 'LZ4_STREAMSIZE_U64' undeclared (first use in this function); did you mean 'LZ4_STREAMSIZE'? 36 | #define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) | ^~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ca8b6646322a4cb911fad5fb9cb38046743609bf Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...2-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch new file mode 100644 index 0000000000..b43def6bb7 --- /dev/null +++ b/package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch @@ -0,0 +1,34 @@ +From 19f77c6f6277a274434d6d8883f50e7955c6a8db Mon Sep 17 00:00:00 2001 +From: Jaegeuk Kim +Date: Mon, 29 Aug 2022 11:03:35 -0700 +Subject: f2fs-tools: fix build error on lz4-1.9.4 + +LZ4_STREAMSIZE_U64 is undefined in new lz4 lib. + +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=19f77c6f6277a274434d6d8883f50e7955c6a8db] +Signed-off-by: Fabrice Fontaine +--- + fsck/compress.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/fsck/compress.c b/fsck/compress.c +index b413492..b15f0a4 100644 +--- a/fsck/compress.c ++++ b/fsck/compress.c +@@ -32,10 +32,7 @@ + #ifdef HAVE_LIBLZ4 + #define LZ4_MEMORY_USAGE 14 + #define LZ4_MAX_INPUT_SIZE 0x7E000000 /* 2 113 929 216 bytes */ +-#ifndef LZ4_STREAMSIZE +-#define LZ4_STREAMSIZE (LZ4_STREAMSIZE_U64 * sizeof(long long)) +-#endif +-#define LZ4_MEM_COMPRESS LZ4_STREAMSIZE ++#define LZ4_MEM_COMPRESS sizeof(LZ4_stream_t) + #define LZ4_ACCELERATION_DEFAULT 1 + #define LZ4_WORK_SIZE ALIGN_UP(LZ4_MEM_COMPRESS, 8) + #endif +-- +cgit + From thomas.petazzoni at bootlin.com Sun Oct 30 10:51:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:51:34 +0100 Subject: [Buildroot] [git commit] package/f2fs-tools: add lz4 and lzo optional dependencies Message-ID: <20221030105150.C65DA8746C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=952fa08764acc8d78985d2cc91d37112324b67cb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master lz4 and lzo are optional dependencies (enabled by default) since bump to version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-configure-ac-fix-cross-compilation.patch | 88 ++++++++++++++++++++++ package/f2fs-tools/f2fs-tools.mk | 18 ++++- 2 files changed, 105 insertions(+), 1 deletion(-) diff --git a/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch new file mode 100644 index 0000000000..0e3d4da191 --- /dev/null +++ b/package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch @@ -0,0 +1,88 @@ +From 32e7d272344024c216f155c3463dd2d548f3fafd Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 4 Jul 2022 11:29:19 +0200 +Subject: configure.ac: fix cross compilation + +AC_CHECK_LIB seems to not work correctly with OpenWrt. Add possibility +to disable lz4 and lzo2 manually. + +Fixes errors in the form of: + Package f2fsck is missing dependencies for the following libraries: + liblz4.so.1 + liblzo2.so.2 + +Signed-off-by: Nick Hainke +Signed-off-by: Jaegeuk Kim +[Retrieved from: +https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=32e7d272344024c216f155c3463dd2d548f3fafd] +Signed-off-by: Fabrice Fontaine +--- + configure.ac | 44 ++++++++++++++++++++++++++++++++++---------- + 1 file changed, 34 insertions(+), 10 deletions(-) + +diff --git a/configure.ac b/configure.ac +index ea39461..dbe9ad3 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -50,6 +50,18 @@ AC_ARG_WITH([blkid], + [], + [with_blkid=check]) + ++AC_ARG_WITH([lzo2], ++ [AS_HELP_STRING([--without-lzo2], ++ [Ignore presence of liblzo2 and disable lzo2 support])], ++ [], ++ [with_lzo2=check]) ++ ++AC_ARG_WITH([lz4], ++ [AS_HELP_STRING([--without-lz4], ++ [Ignore presence of liblz4 and disable lz4 support])], ++ [], ++ [with_lz4=check]) ++ + # Checks for programs. + AC_PROG_CC + AM_PROG_AR +@@ -71,17 +83,29 @@ AS_IF([test "x$with_blkid" != xno], + fi + ], -lblkid)]) + +-AC_CHECK_LIB([lzo2], [main], +- [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) +- AC_DEFINE([HAVE_LIBLZO2], [1], +- [Define if you have liblzo2]) +- ], [], []) ++AS_IF([test "x$with_lzo2" != xno], ++ [AC_CHECK_LIB([lzo2], [main], ++ [AC_SUBST([liblzo2_LIBS], ["-llzo2"]) ++ AC_DEFINE([HAVE_LIBLZO2], [1], ++ [Define if you have liblzo2]) ++ ], ++ [if test "x$with_lzo2" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lzo2 was given, but test for lzo2 failed]) ++ fi ++ ], -llzo2)]) + +-AC_CHECK_LIB([lz4], [main], +- [AC_SUBST([liblz4_LIBS], ["-llz4"]) +- AC_DEFINE([HAVE_LIBLZ4], [1], +- [Define if you have liblz4]) +- ], [], []) ++AS_IF([test "x$with_lz4" != xno], ++ [AC_CHECK_LIB([lz4], [main], ++ [AC_SUBST([liblz4_LIBS], ["-llz4"]) ++ AC_DEFINE([HAVE_LIBLZ4], [1], ++ [Define if you have liblz4]) ++ ], ++ [if test "x$with_lz4" != xcheck; then ++ AC_MSG_FAILURE( ++ [--with-lz4 was given, but test for lz4 failed]) ++ fi ++ ], -llz4)]) + + AS_IF([test "x$with_selinux" != xno], + [AC_CHECK_LIB([selinux], [getcon], +-- +cgit + diff --git a/package/f2fs-tools/f2fs-tools.mk b/package/f2fs-tools/f2fs-tools.mk index 2c4ee9185b..60f1004d77 100644 --- a/package/f2fs-tools/f2fs-tools.mk +++ b/package/f2fs-tools/f2fs-tools.mk @@ -22,6 +22,20 @@ else F2FS_TOOLS_CONF_OPTS += --without-selinux endif +ifeq ($(BR2_PACKAGE_LZ4),y) +F2FS_TOOLS_CONF_OPTS += --with-lz4 +F2FS_TOOLS_DEPENDENCIES += lz4 +else +F2FS_TOOLS_CONF_OPTS += --without-lz4 +endif + +ifeq ($(BR2_PACKAGE_LZO),y) +F2FS_TOOLS_CONF_OPTS += --with-lzo2 +F2FS_TOOLS_DEPENDENCIES += lzo +else +F2FS_TOOLS_CONF_OPTS += --without-lzo2 +endif + ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) # util-linux is a dependency already, no need to list it again F2FS_TOOLS_CONF_OPTS += --with-blkid @@ -34,7 +48,9 @@ endif # blkid support even if we have host-util-linux HOST_F2FS_TOOLS_CONF_OPTS = \ --without-selinux \ - --without-blkid + --without-blkid \ + --without-lz4 \ + --without-lzo2 $(eval $(autotools-package)) $(eval $(host-autotools-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 10:52:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:52:05 +0100 Subject: [Buildroot] [PATCH 1/2] package/f2fs-tools: add lz4 and lzo optional dependencies In-Reply-To: <20221029170023.219493-1-fontaine.fabrice@gmail.com> References: <20221029170023.219493-1-fontaine.fabrice@gmail.com> Message-ID: <20221030115205.0fab7010@windsurf> On Sat, 29 Oct 2022 19:00:22 +0200 Fabrice Fontaine wrote: > lz4 and lzo are optional dependencies (enabled by default) since bump to > version 1.14.0 in commit cf566658f28f3e4b362cc8f9235e6b7768af355c and > https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=b585244e726c1024f7b842033689992a383808cc > > Signed-off-by: Fabrice Fontaine > --- > ...1-configure-ac-fix-cross-compilation.patch | 88 +++++++++++++++++++ > package/f2fs-tools/f2fs-tools.mk | 18 +++- > 2 files changed, 105 insertions(+), 1 deletion(-) > create mode 100644 package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch Both applied to master. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:44 +0100 Subject: [Buildroot] [git commit] package/hackrf: bump to version 2022.09.1 Message-ID: <20221030110442.D00F58746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f020e03ad9910f9e3419666aa5c7d58ab205fa9d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Update site - Drop patch (already in version) https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...es-FindFFTW.cmake-fix-build-without-fftw3.patch | 34 ---------------------- package/hackrf/Config.in | 2 +- package/hackrf/hackrf.hash | 2 +- package/hackrf/hackrf.mk | 4 +-- 4 files changed, 4 insertions(+), 38 deletions(-) diff --git a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch b/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch deleted file mode 100644 index 2b1f34879b..0000000000 --- a/package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 3e32f46c7948f6b26476558905995ebec9b01760 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 15 Oct 2021 23:36:54 +0200 -Subject: [PATCH] cmake/modules/FindFFTW.cmake: fix build without fftw3 - -Build on Linux fails if libfftw3 is not available since commit -https://github.com/greatscottgadgets/hackrf/commit/a8c1fc92e9fa10843cb4aafd68c52f9903ebd05d -which replaced -pkg_check_modules(FFTW REQUIRED fftw3f) -by -find_package(FFTW REQUIRED) - -Fix this build failure by updating FindFFTW.cmake to check for fftw3f - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/greatscottgadgets/hackrf/commit/3e32f46c7948f6b26476558905995ebec9b01760] ---- - host/cmake/modules/FindFFTW.cmake | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/host/cmake/modules/FindFFTW.cmake b/host/cmake/modules/FindFFTW.cmake -index b9f3bfb81..802db4f5b 100644 ---- a/host/cmake/modules/FindFFTW.cmake -+++ b/host/cmake/modules/FindFFTW.cmake -@@ -16,7 +16,7 @@ IF (WIN32) - include_directories(${FFTW_INCLUDES}) - find_library (FFTW_LIBRARIES NAMES ${FFTW_LIBRARIES}) - ELSE(WIN32) --find_library (FFTW_LIBRARIES NAMES fftw3) -+find_library (FFTW_LIBRARIES NAMES fftw3f) - ENDIF(WIN32) - - diff --git a/package/hackrf/Config.in b/package/hackrf/Config.in index 05d01adc96..d5df328dfa 100644 --- a/package/hackrf/Config.in +++ b/package/hackrf/Config.in @@ -9,7 +9,7 @@ config BR2_PACKAGE_HACKRF help Library and tools for accessing HackRF SDR boards. - https://github.com/mossmann/hackrf/tree/master/host + https://hackrf.readthedocs.io comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ diff --git a/package/hackrf/hackrf.hash b/package/hackrf/hackrf.hash index 9053858f76..16ccb9dcfb 100644 --- a/package/hackrf/hackrf.hash +++ b/package/hackrf/hackrf.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 a43e5080c11efdfe69ddebcc35a02b018e30e820de0e0ebdc7948cf7b0cd93a3 hackrf-2021.03.1.tar.xz +sha256 bacd4e7937467ffa14654624444c8b5c716ab470d8c1ee8d220d2094ae2adb3e hackrf-2022.09.1.tar.xz sha256 49b60a6288f90f49074228cc1fae0fb16871ba36b756013abdf7c2fc92f01fad COPYING diff --git a/package/hackrf/hackrf.mk b/package/hackrf/hackrf.mk index c224afc332..4317da60bc 100644 --- a/package/hackrf/hackrf.mk +++ b/package/hackrf/hackrf.mk @@ -4,8 +4,8 @@ # ################################################################################ -HACKRF_VERSION = 2021.03.1 -HACKRF_SITE = https://github.com/mossmann/hackrf/releases/download/v$(HACKRF_VERSION) +HACKRF_VERSION = 2022.09.1 +HACKRF_SITE = https://github.com/greatscottgadgets/hackrf/releases/download/v$(HACKRF_VERSION) HACKRF_SOURCE = hackrf-$(HACKRF_VERSION).tar.xz HACKRF_LICENSE = GPL-2.0+, BSD-3-Clause HACKRF_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:45 +0100 Subject: [Buildroot] [git commit] package/python-maturin: bump to version 0.13.7 Message-ID: <20221030110442.DEE508746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=17f2af56cc03d12023ed9e435a133c52bd495f1f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-maturin/python-maturin.hash | 2 +- package/python-maturin/python-maturin.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/python-maturin/python-maturin.hash b/package/python-maturin/python-maturin.hash index e2de1123ac..eadf300bc2 100644 --- a/package/python-maturin/python-maturin.hash +++ b/package/python-maturin/python-maturin.hash @@ -1,5 +1,5 @@ # Locally calculated after vendoring -sha256 c3c80ea7c10817c5fa1862c15ffae85c00db96d33b2b9f8088abe0024b983d84 maturin-0.13.5.tar.gz +sha256 06d9d166b4a2d86f06ed09eeb362ac03728e1fbd2b852cc6a4ddc7cc75029237 maturin-0.13.7.tar.gz # Locally computed sha256 checksums sha256 a60eea817514531668d7e00765731449fe14d059d3249e0bc93b36de45f759f2 license-apache sha256 ea7882c559733766ad08343bde1d1ec80a4967c03a738fb8e0058ef6289f7b7c license-mit diff --git a/package/python-maturin/python-maturin.mk b/package/python-maturin/python-maturin.mk index f67f0ef562..ffbd131ef0 100644 --- a/package/python-maturin/python-maturin.mk +++ b/package/python-maturin/python-maturin.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_MATURIN_VERSION = 0.13.5 +PYTHON_MATURIN_VERSION = 0.13.7 PYTHON_MATURIN_SOURCE = maturin-$(PYTHON_MATURIN_VERSION).tar.gz -PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/02/02/0bc5e44bc6f0a1ec21bd1b32d7d0ff6035a72858823ef394a95ac66327b7 +PYTHON_MATURIN_SITE = https://files.pythonhosted.org/packages/4f/19/6f982e341612ab442f90ba1a047a4188d48473ad0d1dbfb3dffdaa20e095 PYTHON_MATURIN_SETUP_TYPE = setuptools PYTHON_MATURIN_LICENSE = Apache-2.0 or MIT PYTHON_MATURIN_LICENSE_FILES = license-apache license-mit From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:47 +0100 Subject: [Buildroot] [git commit] package/pps-tools: bump to version 1.0.3 Message-ID: <20221030110442.EBED687470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32602849a8352647c46cc5330668339000205bdf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/ago/pps-tools is redirecting to https://github.com/redlab-i/pps-tools https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/pps-tools/Config.in | 2 +- package/pps-tools/pps-tools.hash | 2 +- package/pps-tools/pps-tools.mk | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/pps-tools/Config.in b/package/pps-tools/Config.in index 0c4bb112a9..16caef3e0e 100644 --- a/package/pps-tools/Config.in +++ b/package/pps-tools/Config.in @@ -4,4 +4,4 @@ config BR2_PACKAGE_PPS_TOOLS Pulse per second tools. Provides timepps.h and other PPS utilities. - https://github.com/ago/pps-tools/ + https://github.com/redlab-i/pps-tools/ diff --git a/package/pps-tools/pps-tools.hash b/package/pps-tools/pps-tools.hash index ee3e4e3d79..b8cc2f64d5 100644 --- a/package/pps-tools/pps-tools.hash +++ b/package/pps-tools/pps-tools.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 1168f1474235017af413afdb07288303ad7a7b12a0282f3bf9ed0e22fe0d7d2e pps-tools-e2b25049df9a4da28168b7378016f1650d0dfa6b.tar.gz +sha256 89163e29f1a4a0a702bbe25b900fd37d2eb86442329cefee58847e57e1964d7a pps-tools-1.0.3.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/pps-tools/pps-tools.mk b/package/pps-tools/pps-tools.mk index 2d82cf7dad..0aa22acf4e 100644 --- a/package/pps-tools/pps-tools.mk +++ b/package/pps-tools/pps-tools.mk @@ -4,8 +4,8 @@ # ################################################################################ -PPS_TOOLS_VERSION = e2b25049df9a4da28168b7378016f1650d0dfa6b -PPS_TOOLS_SITE = $(call github,ago,pps-tools,$(PPS_TOOLS_VERSION)) +PPS_TOOLS_VERSION = 1.0.3 +PPS_TOOLS_SITE = $(call github,redlab-i,pps-tools,v$(PPS_TOOLS_VERSION)) PPS_TOOLS_INSTALL_STAGING = YES PPS_TOOLS_LICENSE = GPL-2.0+ PPS_TOOLS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:48 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:48 +0100 Subject: [Buildroot] [git commit] package/python-wsaccel: bump to version 0.6.4 Message-ID: <20221030110443.05FC387471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8a5178293fa9dcfab1e2599de6dd7d6b163c7007 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-wsaccel/python-wsaccel.hash | 4 ++-- package/python-wsaccel/python-wsaccel.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-wsaccel/python-wsaccel.hash b/package/python-wsaccel/python-wsaccel.hash index 9d0002d41d..b388c3cc7c 100644 --- a/package/python-wsaccel/python-wsaccel.hash +++ b/package/python-wsaccel/python-wsaccel.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/wsaccel/json -md5 973168711818dd98b8b28a4c2db77a27 wsaccel-0.6.3.tar.gz -sha256 fdb27866bb6b6e7a29e45222778ff97938782a0ce92eff07dfb20af8fb9301c4 wsaccel-0.6.3.tar.gz +md5 73bdc70035813ded14f9a4b81e82622a wsaccel-0.6.4.tar.gz +sha256 cbf66a88bcaf6c6ad16d50ea29215891526b6e993c4bc7ed44b044ee6fe3ad3d wsaccel-0.6.4.tar.gz # Locally computed sha256 checksums sha256 b6982974cb838b985b54b663d1780d280735086249c2e28015f25dd455df25da LICENSE diff --git a/package/python-wsaccel/python-wsaccel.mk b/package/python-wsaccel/python-wsaccel.mk index 7c78951f2f..ce41d431ff 100644 --- a/package/python-wsaccel/python-wsaccel.mk +++ b/package/python-wsaccel/python-wsaccel.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WSACCEL_VERSION = 0.6.3 +PYTHON_WSACCEL_VERSION = 0.6.4 PYTHON_WSACCEL_SOURCE = wsaccel-$(PYTHON_WSACCEL_VERSION).tar.gz -PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/f5/d1/3e99875a764d0d6ec94a74977ed72dd3022a7f31d036622da9cff8fc072f +PYTHON_WSACCEL_SITE = https://files.pythonhosted.org/packages/77/0b/a44df15382a76b6768184630d483b8363d65b9f70d1aacf76153d496bbb9 PYTHON_WSACCEL_LICENSE = Apache-2.0 PYTHON_WSACCEL_LICENSE_FILES = LICENSE PYTHON_WSACCEL_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:50 +0100 Subject: [Buildroot] [git commit] package/sedutil: bump to version 1.20.0 Message-ID: <20221030110443.13A4D8746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9cee6283459169a08cb72b96362de8bd4d1bb69f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/sedutil/sedutil.hash | 2 +- package/sedutil/sedutil.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sedutil/sedutil.hash b/package/sedutil/sedutil.hash index 26643ef684..2ceb5db659 100644 --- a/package/sedutil/sedutil.hash +++ b/package/sedutil/sedutil.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9259466b4f73af276153c5245834a56f48f8721ea7263611b5d5e8326bc43d9e sedutil-1.15.1.tar.gz +sha256 88016b93cbbef98fa6f5c4e6f58e6c871662b6a7f1fc8dc788c8599fa37a44f3 sedutil-1.20.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 Common/LICENSE.txt diff --git a/package/sedutil/sedutil.mk b/package/sedutil/sedutil.mk index c80e43448d..566ed4fae8 100644 --- a/package/sedutil/sedutil.mk +++ b/package/sedutil/sedutil.mk @@ -4,7 +4,7 @@ # ################################################################################ -SEDUTIL_VERSION = 1.15.1 +SEDUTIL_VERSION = 1.20.0 SEDUTIL_SITE = $(call github,Drive-Trust-Alliance,sedutil,$(SEDUTIL_VERSION)) SEDUTIL_LICENSE = GPL-3.0+ SEDUTIL_LICENSE_FILES = Common/LICENSE.txt From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:56 +0100 Subject: [Buildroot] [git commit] package/minizip-zlib: bump to version 1.2.13 Message-ID: <20221030110443.4A3B58746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8ac75a9a21743888fc56421f47fae82d22351c12 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use license file available since https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 https://github.com/madler/zlib/blob/v1.2.13/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minizip-zlib/minizip-zlib.hash | 4 ++-- package/minizip-zlib/minizip-zlib.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/minizip-zlib/minizip-zlib.hash b/package/minizip-zlib/minizip-zlib.hash index e6ca974e2f..df5e8d723a 100644 --- a/package/minizip-zlib/minizip-zlib.hash +++ b/package/minizip-zlib/minizip-zlib.hash @@ -1,4 +1,4 @@ # From http://www.zlib.net/ -sha256 7db46b8d7726232a621befaab4a1c870f00a90805511c0e0090441dac57def18 zlib-1.2.12.tar.xz +sha256 d14c38e313afc35a9a8760dadf26042f51ea0f5d154b0630a31da0540107fb98 zlib-1.2.13.tar.xz # License files, locally calculated -sha256 fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd README +sha256 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243 LICENSE diff --git a/package/minizip-zlib/minizip-zlib.mk b/package/minizip-zlib/minizip-zlib.mk index ec0c3da7d6..4367a2420f 100644 --- a/package/minizip-zlib/minizip-zlib.mk +++ b/package/minizip-zlib/minizip-zlib.mk @@ -4,11 +4,11 @@ # ################################################################################ -MINIZIP_ZLIB_VERSION = 1.2.12 +MINIZIP_ZLIB_VERSION = 1.2.13 MINIZIP_ZLIB_SOURCE = zlib-$(MINIZIP_ZLIB_VERSION).tar.xz MINIZIP_ZLIB_SITE = http://www.zlib.net MINIZIP_ZLIB_LICENSE = Zlib -MINIZIP_ZLIB_LICENSE_FILES = README +MINIZIP_ZLIB_LICENSE_FILES = LICENSE MINIZIP_ZLIB_INSTALL_STAGING = YES MINIZIP_ZLIB_SUBDIR = contrib/minizip # configure is not shipped in contrib/minizip From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:52 +0100 Subject: [Buildroot] [git commit] package/gawk: bump to version 5.2.0 Message-ID: <20221030110443.20A878746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd474c43e3d8bc95ed86baf0408d716b5171eec5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/gawk/gawk.hash | 4 ++-- package/gawk/gawk.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/gawk/gawk.hash b/package/gawk/gawk.hash index 894c939c5b..3ab0cfdbb3 100644 --- a/package/gawk/gawk.hash +++ b/package/gawk/gawk.hash @@ -1,6 +1,6 @@ # Locally calculated after checking pgp signature -# https://ftp.gnu.org/gnu/gawk/gawk-5.1.1.tar.xz.sig +# https://ftp.gnu.org/gnu/gawk/gawk-5.2.0.tar.xz.sig # Primary key fingerprint: D196 7C63 7887 1317 7D86 1ED7 DF59 7815 937E C0D2 -sha256 d87629386e894bbea11a5e00515fc909dc9b7249529dad9e6a3a2c77085f7ea2 gawk-5.1.1.tar.xz +sha256 e4ddbad1c2ef10e8e815ca80208d0162d4c983e6cca16f925e8418632d639018 gawk-5.2.0.tar.xz # Locally calculated sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/gawk/gawk.mk b/package/gawk/gawk.mk index 3a1cec4969..47f681339d 100644 --- a/package/gawk/gawk.mk +++ b/package/gawk/gawk.mk @@ -4,7 +4,7 @@ # ################################################################################ -GAWK_VERSION = 5.1.1 +GAWK_VERSION = 5.2.0 GAWK_SOURCE = gawk-$(GAWK_VERSION).tar.xz GAWK_SITE = $(BR2_GNU_MIRROR)/gawk GAWK_DEPENDENCIES = host-gawk From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:53 +0100 Subject: [Buildroot] [git commit] package/minizip: bump to version 3.0.7 Message-ID: <20221030110443.2E5B987470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a92f29dae72fca79a3585abe93c2482528bbfe83 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minizip/minizip.hash | 2 +- package/minizip/minizip.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/minizip/minizip.hash b/package/minizip/minizip.hash index 0c6e218488..55fc176dbd 100644 --- a/package/minizip/minizip.hash +++ b/package/minizip/minizip.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 383fa1bdc28c482828a8a8db53f758dbd44291b641182724fda5df5b59cce543 minizip-3.0.6.tar.gz +sha256 39981a0db1bb6da504909bce63d7493286c5e50825c056564544c990d15c55cf minizip-3.0.7.tar.gz sha256 675181c03fc1302a1c8554c00f7be9bb420c5dbc9dcc2013433cec144413de03 LICENSE diff --git a/package/minizip/minizip.mk b/package/minizip/minizip.mk index 5adee7c494..c74c0df8d1 100644 --- a/package/minizip/minizip.mk +++ b/package/minizip/minizip.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINIZIP_VERSION = 3.0.6 +MINIZIP_VERSION = 3.0.7 MINIZIP_SITE = $(call github,zlib-ng,minizip-ng,$(MINIZIP_VERSION)) MINIZIP_DEPENDENCIES = host-pkgconf MINIZIP_INSTALL_STAGING = YES From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:08 +0100 Subject: [Buildroot] [git commit] package/libpagekite: bump to version 0.91.201110 Message-ID: <20221030110443.A30A487471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=20348d48592e49542d7f97f31697271ca5873ba7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpagekite/libpagekite.hash | 2 +- package/libpagekite/libpagekite.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libpagekite/libpagekite.hash b/package/libpagekite/libpagekite.hash index 8716b991ca..2c2e5c9b59 100644 --- a/package/libpagekite/libpagekite.hash +++ b/package/libpagekite/libpagekite.hash @@ -1,5 +1,5 @@ # Locally calculated -sha256 c812815aae6f100212b7d6f662370a0634151fabb59f028126a59c4083a6d26d libpagekite-0.91.190530.tar.gz +sha256 db835d49becebc00d462f2f47aefc1f1d3a4e0e096487cb3b4248134185df715 libpagekite-0.91.201110.tar.gz # License files, locally calculated sha256 ba443b9c9d4273d06aae3e147e9ad1ec199cc9c23455f486a039536d47f57eed doc/COPYING.md diff --git a/package/libpagekite/libpagekite.mk b/package/libpagekite/libpagekite.mk index 60b62f5cfd..bb235ba1f3 100644 --- a/package/libpagekite/libpagekite.mk +++ b/package/libpagekite/libpagekite.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBPAGEKITE_VERSION = 0.91.190530 +LIBPAGEKITE_VERSION = 0.91.201110 LIBPAGEKITE_SITE = $(call github,pagekite,libpagekite,v$(LIBPAGEKITE_VERSION)) # pkrelay is AGPL-3.0+ but is not built From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:59 +0100 Subject: [Buildroot] [git commit] package/makedumpfile: bump to version 1.7.2 Message-ID: <20221030110443.6221487470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=29c0b4e6db89131005d055903ffb2bc613bb4c2e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official tarball https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/makedumpfile/makedumpfile.hash | 2 +- package/makedumpfile/makedumpfile.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/makedumpfile/makedumpfile.hash b/package/makedumpfile/makedumpfile.hash index 5eeb6387fa..f38d93c04a 100644 --- a/package/makedumpfile/makedumpfile.hash +++ b/package/makedumpfile/makedumpfile.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8985f8df249087ea68c6051dec6dac3ef0703fe2aa87d0266f3951f93aa8da5e makedumpfile-1.7.0.tar.gz +sha256 748583ea4c0b32346008aa53b313e9708f60a8481959c25c76e5c94740032d9b makedumpfile-1.7.2.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/makedumpfile/makedumpfile.mk b/package/makedumpfile/makedumpfile.mk index 868c681344..8dc60b043e 100644 --- a/package/makedumpfile/makedumpfile.mk +++ b/package/makedumpfile/makedumpfile.mk @@ -4,8 +4,8 @@ # ################################################################################ -MAKEDUMPFILE_VERSION = 1.7.0 -MAKEDUMPFILE_SITE = $(call github,makedumpfile,makedumpfile,$(MAKEDUMPFILE_VERSION)) +MAKEDUMPFILE_VERSION = 1.7.2 +MAKEDUMPFILE_SITE = https://github.com/makedumpfile/makedumpfile/releases/download/$(MAKEDUMPFILE_VERSION) MAKEDUMPFILE_DEPENDENCIES = bzip2 elfutils xz zlib MAKEDUMPFILE_LICENSE = GPL-2.0 MAKEDUMPFILE_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:55 +0100 Subject: [Buildroot] [git commit] package/minissdpd: bump to version 1.6.0 Message-ID: <20221030110443.3C8C087471@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3be3113b570715121d5b8f9ea689cf42ed512d66 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of LICENSE file (license refined for github: https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/minissdpd/minissdpd.hash | 4 ++-- package/minissdpd/minissdpd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/minissdpd/minissdpd.hash b/package/minissdpd/minissdpd.hash index e14fe7ab2c..bc1db5f283 100644 --- a/package/minissdpd/minissdpd.hash +++ b/package/minissdpd/minissdpd.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 a073be9c6d9194feaeccf31cd986c48afd2212426b6594e75166cedff1c461aa minissdpd-1.5.20211105.tar.gz -sha256 45950e1d443106906f83a4ec7b9c2e1a9d6457130737a493cff0e5b7a39da570 LICENSE +sha256 f4c2dea6a472e0a5cc9dca2dc4c1fc36ba5538eacf8d793825293251725546bd minissdpd-1.6.0.tar.gz +sha256 a0f853256954f388ce4fab5faaef6a1f5bcd5e682c3c7c70b07b7130e932a021 LICENSE diff --git a/package/minissdpd/minissdpd.mk b/package/minissdpd/minissdpd.mk index 2b9fac4df1..4f594cb5a0 100644 --- a/package/minissdpd/minissdpd.mk +++ b/package/minissdpd/minissdpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MINISSDPD_VERSION = 1.5.20211105 +MINISSDPD_VERSION = 1.6.0 MINISSDPD_SITE = http://miniupnp.free.fr/files MINISSDPD_LICENSE = BSD-3-Clause MINISSDPD_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:05 +0100 Subject: [Buildroot] [git commit] package/python-pypa-build: bump to version 0.9.0 Message-ID: <20221030110443.904B087470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d86c46b83bcbebc40e40718796ef9033667c9d27 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-pypa-build/python-pypa-build.hash | 4 ++-- package/python-pypa-build/python-pypa-build.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pypa-build/python-pypa-build.hash b/package/python-pypa-build/python-pypa-build.hash index c0856c2abf..4c02ee1dce 100644 --- a/package/python-pypa-build/python-pypa-build.hash +++ b/package/python-pypa-build/python-pypa-build.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/build/json -md5 307632355e32c3769c99da66f92fe020 build-0.8.0.tar.gz -sha256 887a6d471c901b1a6e6574ebaeeebb45e5269a79d095fe9a8f88d6614ed2e5f0 build-0.8.0.tar.gz +md5 f2dc1823b0eff7037e19be18e354b2f1 build-0.9.0.tar.gz +sha256 1a07724e891cbd898923145eb7752ee7653674c511378eb9c7691aab1612bc3c build-0.9.0.tar.gz # Locally computed sha256 checksums sha256 aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f LICENSE diff --git a/package/python-pypa-build/python-pypa-build.mk b/package/python-pypa-build/python-pypa-build.mk index de4894dc3a..b78aefe855 100644 --- a/package/python-pypa-build/python-pypa-build.mk +++ b/package/python-pypa-build/python-pypa-build.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYPA_BUILD_VERSION = 0.8.0 +PYTHON_PYPA_BUILD_VERSION = 0.9.0 PYTHON_PYPA_BUILD_SOURCE = build-$(PYTHON_PYPA_BUILD_VERSION).tar.gz -PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/52/fa/931038182be739955cf83179d9b9a6ce9832bc5f9a917a006f765cb53a1f +PYTHON_PYPA_BUILD_SITE = https://files.pythonhosted.org/packages/0f/61/aaf43fbb36cc4308be8ac8088f52db9622b0dbf1f0880c1016ae6aa03f46 PYTHON_PYPA_BUILD_LICENSE = MIT PYTHON_PYPA_BUILD_LICENSE_FILES = LICENSE PYTHON_PYPA_BUILD_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 10:53:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:53:58 +0100 Subject: [Buildroot] [git commit] package/libidn2: bump to version 2.3.4 Message-ID: <20221030110443.56EE78746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c321a08ad468ef4154ae772e65ce500e00020529 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libidn2/libidn2.hash | 2 +- package/libidn2/libidn2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/libidn2/libidn2.hash b/package/libidn2/libidn2.hash index 919c9b18a5..1051231bde 100644 --- a/package/libidn2/libidn2.hash +++ b/package/libidn2/libidn2.hash @@ -1,5 +1,5 @@ # Calculated locally after checking signature -sha256 f3ac987522c00d33d44b323cae424e2cffcb4c63c6aa6cd1376edacbf1c36eb0 libidn2-2.3.3.tar.gz +sha256 93caba72b4e051d1f8d4f5a076ab63c99b77faee019b72b9783b267986dbb45f libidn2-2.3.4.tar.gz # Hash for license files: sha256 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76 COPYING diff --git a/package/libidn2/libidn2.mk b/package/libidn2/libidn2.mk index 1652227291..9d72998149 100644 --- a/package/libidn2/libidn2.mk +++ b/package/libidn2/libidn2.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBIDN2_VERSION = 2.3.3 +LIBIDN2_VERSION = 2.3.4 LIBIDN2_SITE = $(BR2_GNU_MIRROR)/libidn LIBIDN2_LICENSE = GPL-2.0+ or LGPL-3.0+ (library) LIBIDN2_LICENSE_FILES = COPYING COPYINGv2 COPYING.LESSERv3 COPYING.unicode From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:01 +0100 Subject: [Buildroot] [git commit] package/lldpd: security bump to version 1.0.15 Message-ID: <20221030110443.6EE1E87472@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=62e082ec4d58e117697324938b9833c057116710 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix heap overflow when reading SONMP. CVE-2021-43612. - https://vincentbernat.github.io/lldpd/ is redirecting to https://lldpd.github.io/ https://github.com/lldpd/lldpd/blob/1.0.15/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/lldpd/Config.in | 2 +- package/lldpd/lldpd.hash | 4 ++-- package/lldpd/lldpd.mk | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/lldpd/Config.in b/package/lldpd/Config.in index 9a9517b5b0..3e0446986f 100644 --- a/package/lldpd/Config.in +++ b/package/lldpd/Config.in @@ -18,7 +18,7 @@ config BR2_PACKAGE_LLDPD lldpd is an ISC-licensed implementation of LLDP for various Unixes. It also supports some proprietary protocols. - https://vincentbernat.github.io/lldpd/ + https://lldpd.github.io/ if BR2_PACKAGE_LLDPD diff --git a/package/lldpd/lldpd.hash b/package/lldpd/lldpd.hash index 6e809b2796..6db5ca98f1 100644 --- a/package/lldpd/lldpd.hash +++ b/package/lldpd/lldpd.hash @@ -1,5 +1,5 @@ # Locally computed after checking gpg key -# https://media.luffy.cx/files/lldpd/lldpd-1.0.9.tar.gz.gpg +# https://media.luffy.cx/files/lldpd/lldpd-1.0.15.tar.gz.gpg # using key AEF2348766F371C689A7360095A42FE8353525F9 -sha256 6b64eb3125952b1e33472198b054e8aa0dee45f45d3d4be22789090a474949f5 lldpd-1.0.9.tar.gz +sha256 f7fe3a130be98a19c491479ef60f36b8ee41a9e6bc4d7f2c41033f63956a3126 lldpd-1.0.15.tar.gz sha256 0e96a5aea65f16e2239231ce4ab90497f8bc3bb8fe6abe9299aade4726ff7c8d LICENSE diff --git a/package/lldpd/lldpd.mk b/package/lldpd/lldpd.mk index b88dd002e4..dd6f8dcf5d 100644 --- a/package/lldpd/lldpd.mk +++ b/package/lldpd/lldpd.mk @@ -4,7 +4,7 @@ # ################################################################################ -LLDPD_VERSION = 1.0.9 +LLDPD_VERSION = 1.0.15 LLDPD_SITE = https://media.luffy.cx/files/lldpd LLDPD_DEPENDENCIES = \ $(if $(BR2_PACKAGE_CHECK),check) \ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:12 +0100 Subject: [Buildroot] [git commit] package/libnl: bump to version 3.7.0 Message-ID: <20221030110443.C000887470@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=94c6ba6c7085cece40619a2cab2d93dc54b2a412 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libnl/libnl.hash | 4 ++-- package/libnl/libnl.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libnl/libnl.hash b/package/libnl/libnl.hash index a0f1388528..8a1bd56780 100644 --- a/package/libnl/libnl.hash +++ b/package/libnl/libnl.hash @@ -1,4 +1,4 @@ -# From https://github.com/thom311/libnl/releases/download/libnl3_6_0/libnl-3.6.0.tar.gz.sha256sum -sha256 532155fd011e5a805bd67121b87a01c757e2bb24112ac17e69cb86013b970009 libnl-3.6.0.tar.gz +# From https://github.com/thom311/libnl/releases/download/libnl3_7_0/libnl-3.7.0.tar.gz.sha256sum +sha256 9fe43ccbeeea72c653bdcf8c93332583135cda46a79507bfd0a483bb57f65939 libnl-3.7.0.tar.gz # Locally calculated sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING diff --git a/package/libnl/libnl.mk b/package/libnl/libnl.mk index d3bd185093..6896188f4d 100644 --- a/package/libnl/libnl.mk +++ b/package/libnl/libnl.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBNL_VERSION = 3.6.0 +LIBNL_VERSION = 3.7.0 LIBNL_SITE = https://github.com/thom311/libnl/releases/download/libnl$(subst .,_,$(LIBNL_VERSION)) LIBNL_LICENSE = LGPL-2.1+ LIBNL_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:10 +0100 Subject: [Buildroot] [git commit] package/liblinear: bump to version 2.45 Message-ID: <20221030110443.B69688746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=90d8ca33ef27b3b47999aa0c2c5a499afe362752 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Version 2.45 released on August 11, 2022. Some minor bugs are fixed. Drop first patch (not needed since https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) https://github.com/cjlin1/liblinear/compare/v244...v245 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../0001-blas-don-t-overwrite-ar-options.patch | 36 ---------------------- ...tatic-lib.patch => 0001-build-static-lib.patch} | 0 package/liblinear/liblinear.hash | 2 +- package/liblinear/liblinear.mk | 2 +- 4 files changed, 2 insertions(+), 38 deletions(-) diff --git a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch b/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch deleted file mode 100644 index 23ed6dd227..0000000000 --- a/package/liblinear/0001-blas-don-t-overwrite-ar-options.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cae4c3b80fee0f3637d70f6d33946888c8105637 Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Sat, 13 Dec 2014 17:16:58 +0100 -Subject: [PATCH] blas: don't overwrite ar options - -ar's rcv options get lost when AR is passed on -the command line. - -Signed-off-by: Romain Naour -Signed-off-by: Fabrice Fontaine ---- - blas/Makefile | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/blas/Makefile b/blas/Makefile -index 895fd24..78cec9a 100644 ---- a/blas/Makefile -+++ b/blas/Makefile -@@ -1,4 +1,4 @@ --AR = ar rcv -+AR = ar - RANLIB = ranlib - - HEADERS = blas.h blasp.h -@@ -8,7 +8,7 @@ CFLAGS = $(OPTFLAGS) - FFLAGS = $(OPTFLAGS) - - blas: $(FILES) $(HEADERS) -- $(AR) blas.a $(FILES) -+ $(AR) rcv blas.a $(FILES) - $(RANLIB) blas.a - - clean: --- -1.9.3 - diff --git a/package/liblinear/0002-build-static-lib.patch b/package/liblinear/0001-build-static-lib.patch similarity index 100% rename from package/liblinear/0002-build-static-lib.patch rename to package/liblinear/0001-build-static-lib.patch diff --git a/package/liblinear/liblinear.hash b/package/liblinear/liblinear.hash index 27aa4e3e87..6bc72909d0 100644 --- a/package/liblinear/liblinear.hash +++ b/package/liblinear/liblinear.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 45572b99d4eeffc3e8ad7b72c27370be867edf3523c396d8b278a2c873bfbb5c liblinear-2.44.tar.gz +sha256 3c64eec45c01943a656baac7aeb8ffd782fe0aea53629aa9f5fdb8eec177c92f liblinear-2.45.tar.gz sha256 d49b7898fd9ea7c29f0478e8c409ee7c0f621533d5eca7b7912e80391dc564e3 COPYRIGHT diff --git a/package/liblinear/liblinear.mk b/package/liblinear/liblinear.mk index c100ccc6c5..014f9e2de4 100644 --- a/package/liblinear/liblinear.mk +++ b/package/liblinear/liblinear.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBLINEAR_VERSION = 2.44 +LIBLINEAR_VERSION = 2.45 LIBLINEAR_SITE = http://www.csie.ntu.edu.tw/~cjlin/liblinear LIBLINEAR_LICENSE = BSD-3-Clause LIBLINEAR_LICENSE_FILES = COPYRIGHT From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:09 +0100 Subject: [Buildroot] [git commit] package/libmodbus: bump to version 3.1.8 Message-ID: <20221030110443.ACB618746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5cf6429e2b6f3e2ee292b6c7dc6c0a1c2171bb9c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch site to get latest release https://github.com/stephane/libmodbus/releases/tag/v3.1.8 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libmodbus/libmodbus.hash | 2 +- package/libmodbus/libmodbus.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libmodbus/libmodbus.hash b/package/libmodbus/libmodbus.hash index b676d261de..83b0c3a012 100644 --- a/package/libmodbus/libmodbus.hash +++ b/package/libmodbus/libmodbus.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 7dfe958431d0570b271e1a5b329b76a658e89c614cf119eb5aadb725c87f8fbd libmodbus-3.1.7.tar.gz +sha256 b122f2bc29f749702a22c0a760a7ca2182d541f5fa26bf25e3431f907b606f3c libmodbus-3.1.8.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LESSER diff --git a/package/libmodbus/libmodbus.mk b/package/libmodbus/libmodbus.mk index 46eb860392..2f8c1735da 100644 --- a/package/libmodbus/libmodbus.mk +++ b/package/libmodbus/libmodbus.mk @@ -4,8 +4,8 @@ # ################################################################################ -LIBMODBUS_VERSION = 3.1.7 -LIBMODBUS_SITE = http://libmodbus.org/releases +LIBMODBUS_VERSION = 3.1.8 +LIBMODBUS_SITE = https://github.com/stephane/libmodbus/releases/download/v$(LIBMODBUS_VERSION) LIBMODBUS_LICENSE = LGPL-2.1+ LIBMODBUS_LICENSE_FILES = COPYING.LESSER LIBMODBUS_CPE_ID_VENDOR = libmodbus From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:02 +0100 Subject: [Buildroot] [git commit] package/kismet: bump to version 2022-08-R1 Message-ID: <20221030110443.7CF738746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=caf755999df22bc5580f85674d819004ff842e50 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://www.kismetwireless.net/release/kismet-2022-08-R1/ Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/kismet/kismet.hash | 2 +- package/kismet/kismet.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kismet/kismet.hash b/package/kismet/kismet.hash index fc5f854b7e..725d24e551 100644 --- a/package/kismet/kismet.hash +++ b/package/kismet/kismet.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 aaae4747f14734a73f601af013c0eee26e13680f5e3675dfce09b7de2e68b8a8 kismet-2022-02-R1.tar.xz +sha256 2149cceac5526508653f4d02dcf7a694e3da3dc000a2372a1ee4bf9988279781 kismet-2022-08-R1.tar.xz sha256 93c7f0d7e356b0abfb6f494ff3ea37f96abc84e9a5619b25d4e43f7553a55739 LICENSE diff --git a/package/kismet/kismet.mk b/package/kismet/kismet.mk index 3992a392f8..8def78ad2a 100644 --- a/package/kismet/kismet.mk +++ b/package/kismet/kismet.mk @@ -4,7 +4,7 @@ # ################################################################################ -KISMET_VERSION = 2022-02-R1 +KISMET_VERSION = 2022-08-R1 KISMET_SOURCE = kismet-$(KISMET_VERSION).tar.xz KISMET_SITE = http://www.kismetwireless.net/code KISMET_DEPENDENCIES = \ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:03 +0100 Subject: [Buildroot] [git commit] package/libpam-radius-auth: bump to version 2.0.0 Message-ID: <20221030110443.86C688746F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=860b1b958797bd16bfe7666bb308a5ea026b1b46 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch site to get latest release https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/package/libpam-radius-auth/libpam-radius-auth.hash b/package/libpam-radius-auth/libpam-radius-auth.hash index 0bf97c279c..63f3f1e45e 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.hash +++ b/package/libpam-radius-auth/libpam-radius-auth.hash @@ -1,5 +1,5 @@ # Locally calculated after checking PGP signature -sha256 742d79fc39824726c098e746bd3dc3484f983f5ee082c621c1e848b2c3725305 pam_radius-1.4.0.tar.gz +sha256 798dc358e7a143163e103bd38c4101645b2e93d82aa0ec63d32c0cb929d9c65c libpam-radius-auth-2.0.0.tar.gz # Hash for license file: sha256 67f82e045cf7acfef853ea0f426575a8359161a0a325e19f02b529a87c4b6c34 LICENSE diff --git a/package/libpam-radius-auth/libpam-radius-auth.mk b/package/libpam-radius-auth/libpam-radius-auth.mk index 184e48d3b7..9519aad750 100644 --- a/package/libpam-radius-auth/libpam-radius-auth.mk +++ b/package/libpam-radius-auth/libpam-radius-auth.mk @@ -4,9 +4,8 @@ # ################################################################################ -LIBPAM_RADIUS_AUTH_VERSION = 1.4.0 -LIBPAM_RADIUS_AUTH_SITE = ftp://ftp.freeradius.org/pub/radius -LIBPAM_RADIUS_AUTH_SOURCE = pam_radius-$(LIBPAM_RADIUS_AUTH_VERSION).tar.gz +LIBPAM_RADIUS_AUTH_VERSION = 2.0.0 +LIBPAM_RADIUS_AUTH_SITE = $(call github,FreeRADIUS,pam_radius,release_$(subst .,_,$(LIBPAM_RADIUS_AUTH_VERSION))) LIBPAM_RADIUS_AUTH_DEPENDENCIES = linux-pam LIBPAM_RADIUS_AUTH_INSTALL_STAGING = YES LIBPAM_RADIUS_AUTH_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Sun Oct 30 10:54:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 11:54:06 +0100 Subject: [Buildroot] [git commit] package/jack2: bump to version 1.9.21 Message-ID: <20221030110443.99E9F8746D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c0a13b667b8587816734c432c2e691d4c3ed9763 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/jackaudio/jack2/releases/tag/v1.9.21 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/jack2/jack2.hash | 2 +- package/jack2/jack2.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/jack2/jack2.hash b/package/jack2/jack2.hash index 6361473cf7..c98971ca1c 100644 --- a/package/jack2/jack2.hash +++ b/package/jack2/jack2.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 915ad2900992159bdb729b9fc4ea134b962ce32b2df0b384fee40a2c5808835d jack2-1.9.20.tar.gz +sha256 8b044a40ba5393b47605a920ba30744fdf8bf77d210eca90d39c8637fe6bc65d jack2-1.9.21.tar.gz sha256 d8c320ffc0030d1b096ae4732b50d2b811cf95e9a9b7377c1127b2563e0a0388 COPYING diff --git a/package/jack2/jack2.mk b/package/jack2/jack2.mk index 9d6a3b6479..f7683304a6 100644 --- a/package/jack2/jack2.mk +++ b/package/jack2/jack2.mk @@ -4,7 +4,7 @@ # ################################################################################ -JACK2_VERSION = 1.9.20 +JACK2_VERSION = 1.9.21 JACK2_SITE = $(call github,jackaudio,jack2,v$(JACK2_VERSION)) JACK2_LICENSE = GPL-2.0+ (jack server), LGPL-2.1+ (jack library) JACK2_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 11:05:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:05:50 +0100 Subject: [Buildroot] [PATCH 1/1] package/hackrf: bump to version 2022.09.1 In-Reply-To: <20221029120937.820995-1-fontaine.fabrice@gmail.com> References: <20221029120937.820995-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120550.026290c0@windsurf> On Sat, 29 Oct 2022 14:09:37 +0200 Fabrice Fontaine wrote: > - Update site > - Drop patch (already in version) > > https://github.com/greatscottgadgets/hackrf/releases/tag/v2022.09.1 > > Signed-off-by: Fabrice Fontaine > --- > ...ndFFTW.cmake-fix-build-without-fftw3.patch | 34 ------------------- > package/hackrf/Config.in | 2 +- > package/hackrf/hackrf.hash | 2 +- > package/hackrf/hackrf.mk | 4 +-- > 4 files changed, 4 insertions(+), 38 deletions(-) > delete mode 100644 package/hackrf/0001-cmake-modules-FindFFTW.cmake-fix-build-without-fftw3.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-maturin: bump to version 0.13.7 In-Reply-To: <20221029123903.1422864-1-james.hilliard1@gmail.com> References: <20221029123903.1422864-1-james.hilliard1@gmail.com> Message-ID: <20221030120601.0c81d9ed@windsurf> On Sat, 29 Oct 2022 06:39:03 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-maturin/python-maturin.hash | 2 +- > package/python-maturin/python-maturin.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/pps-tools: bump to version 1.0.3 In-Reply-To: <20221029171948.232254-1-fontaine.fabrice@gmail.com> References: <20221029171948.232254-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120617.1faf349a@windsurf> On Sat, 29 Oct 2022 19:19:48 +0200 Fabrice Fontaine wrote: > https://github.com/ago/pps-tools is redirecting to > https://github.com/redlab-i/pps-tools > > https://github.com/redlab-i/pps-tools/compare/e2b25049df9a4da28168b7378016f1650d0dfa6b...v1.0.3 > > Signed-off-by: Fabrice Fontaine > --- > package/pps-tools/Config.in | 2 +- > package/pps-tools/pps-tools.hash | 2 +- > package/pps-tools/pps-tools.mk | 4 ++-- > 3 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:24 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:24 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-wsaccel: bump to version 0.6.4 In-Reply-To: <20221029172215.1437796-1-james.hilliard1@gmail.com> References: <20221029172215.1437796-1-james.hilliard1@gmail.com> Message-ID: <20221030120624.35ea91b8@windsurf> On Sat, 29 Oct 2022 11:22:15 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-wsaccel/python-wsaccel.hash | 4 ++-- > package/python-wsaccel/python-wsaccel.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/sedutil: bump to version 1.20.0 In-Reply-To: <20221029172613.255025-1-fontaine.fabrice@gmail.com> References: <20221029172613.255025-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120636.06d3f86e@windsurf> On Sat, 29 Oct 2022 19:26:13 +0200 Fabrice Fontaine wrote: > https://github.com/Drive-Trust-Alliance/sedutil/compare/1.15.1...1.20.0 > > Signed-off-by: Fabrice Fontaine > --- > package/sedutil/sedutil.hash | 2 +- > package/sedutil/sedutil.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: bump to version 5.2.0 In-Reply-To: <20221029184742.17565-1-fontaine.fabrice@gmail.com> References: <20221029184742.17565-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120645.74fc2990@windsurf> On Sat, 29 Oct 2022 20:47:42 +0200 Fabrice Fontaine wrote: > https://git.savannah.gnu.org/cgit/gawk.git/tree/NEWS?h=gawk-5.2.0 > > Signed-off-by: Fabrice Fontaine > --- > package/gawk/gawk.hash | 4 ++-- > package/gawk/gawk.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:06:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:06:52 +0100 Subject: [Buildroot] [PATCH 1/1] package/minizip: bump to version 3.0.7 In-Reply-To: <20221029194459.28157-1-fontaine.fabrice@gmail.com> References: <20221029194459.28157-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120652.09b7643c@windsurf> On Sat, 29 Oct 2022 21:44:59 +0200 Fabrice Fontaine wrote: > https://github.com/zlib-ng/minizip-ng/releases/tag/3.0.7 > > Signed-off-by: Fabrice Fontaine > --- > package/minizip/minizip.hash | 2 +- > package/minizip/minizip.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/minissdpd: bump to version 1.6.0 In-Reply-To: <20221029195108.35473-1-fontaine.fabrice@gmail.com> References: <20221029195108.35473-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120701.4795e27e@windsurf> On Sat, 29 Oct 2022 21:51:08 +0200 Fabrice Fontaine wrote: > Update hash of LICENSE file (license refined for github: > https://github.com/miniupnp/miniupnp/commit/af812c877532f2432b0566633e1e539797ef9c13) > > http://miniupnp.free.fr/files/changelog.php?file=minissdpd-1.6.0.tar.gz > > Signed-off-by: Fabrice Fontaine > --- > package/minissdpd/minissdpd.hash | 4 ++-- > package/minissdpd/minissdpd.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/minizip-zlib: bump to version 1.2.13 In-Reply-To: <20221029195647.42758-1-fontaine.fabrice@gmail.com> References: <20221029195647.42758-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120707.35cecd6d@windsurf> On Sat, 29 Oct 2022 21:56:47 +0200 Fabrice Fontaine wrote: > Use license file available since > https://github.com/madler/zlib/commit/352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/blob/v1.2.13/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/minizip-zlib/minizip-zlib.hash | 4 ++-- > package/minizip-zlib/minizip-zlib.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:12 +0100 Subject: [Buildroot] [PATCH 1/1] package/libidn2: bump to version 2.3.4 In-Reply-To: <20221029200108.90174-1-fontaine.fabrice@gmail.com> References: <20221029200108.90174-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120712.48c6ed24@windsurf> On Sat, 29 Oct 2022 22:01:08 +0200 Fabrice Fontaine wrote: > https://gitlab.com/libidn/libidn2/-/blob/v2.3.4/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/libidn2/libidn2.hash | 2 +- > package/libidn2/libidn2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/lldpd: security bump to version 1.0.15 In-Reply-To: <20221029204023.162302-1-fontaine.fabrice@gmail.com> References: <20221029204023.162302-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120728.4c4de507@windsurf> On Sat, 29 Oct 2022 22:40:23 +0200 Fabrice Fontaine wrote: > - Fix heap overflow when reading SONMP. CVE-2021-43612. > - https://vincentbernat.github.io/lldpd/ is redirecting to > https://lldpd.github.io/ > > https://github.com/lldpd/lldpd/blob/1.0.15/NEWS > > Signed-off-by: Fabrice Fontaine > --- > package/lldpd/Config.in | 2 +- > package/lldpd/lldpd.hash | 4 ++-- > package/lldpd/lldpd.mk | 2 +- > 3 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/libmodbus: bump to version 3.1.8 In-Reply-To: <20221030094155.53225-1-fontaine.fabrice@gmail.com> References: <20221030094155.53225-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120758.5e5bad95@windsurf> On Sun, 30 Oct 2022 10:41:55 +0100 Fabrice Fontaine wrote: > Switch site to get latest release > > https://github.com/stephane/libmodbus/releases/tag/v3.1.8 > > Signed-off-by: Fabrice Fontaine > --- > package/libmodbus/libmodbus.hash | 2 +- > package/libmodbus/libmodbus.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/makedumpfile: bump to version 1.7.2 In-Reply-To: <20221029203039.115558-1-fontaine.fabrice@gmail.com> References: <20221029203039.115558-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120718.462bfe18@windsurf> On Sat, 29 Oct 2022 22:30:39 +0200 Fabrice Fontaine wrote: > Use official tarball > > https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.2 > https://github.com/makedumpfile/makedumpfile/releases/tag/1.7.1 > > Signed-off-by: Fabrice Fontaine > --- > package/makedumpfile/makedumpfile.hash | 2 +- > package/makedumpfile/makedumpfile.mk | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpagekite: bump to version 0.91.201110 In-Reply-To: <20221030092832.43581-1-fontaine.fabrice@gmail.com> References: <20221030092832.43581-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120753.3910179c@windsurf> On Sun, 30 Oct 2022 10:28:32 +0100 Fabrice Fontaine wrote: > https://github.com/pagekite/libpagekite/compare/v0.91.190530...v0.91.201110 > > Signed-off-by: Fabrice Fontaine > --- > package/libpagekite/libpagekite.hash | 2 +- > package/libpagekite/libpagekite.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/jack2: bump to version 1.9.21 In-Reply-To: <20221030092749.43292-1-fontaine.fabrice@gmail.com> References: <20221030092749.43292-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120749.62624d73@windsurf> On Sun, 30 Oct 2022 10:27:49 +0100 Fabrice Fontaine wrote: > https://github.com/jackaudio/jack2/releases/tag/v1.9.21 > > Signed-off-by: Fabrice Fontaine > --- > package/jack2/jack2.hash | 2 +- > package/jack2/jack2.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:43 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pypa-build: bump to version 0.9.0 In-Reply-To: <20221030031035.1635268-1-james.hilliard1@gmail.com> References: <20221030031035.1635268-1-james.hilliard1@gmail.com> Message-ID: <20221030120743.4dcde3ff@windsurf> On Sat, 29 Oct 2022 21:10:35 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-pypa-build/python-pypa-build.hash | 4 ++-- > package/python-pypa-build/python-pypa-build.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:08:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:08:12 +0100 Subject: [Buildroot] [PATCH 1/1] package/libnl: bump to version 3.7.0 In-Reply-To: <20221030100904.76419-1-fontaine.fabrice@gmail.com> References: <20221030100904.76419-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120812.0bf3ad04@windsurf> On Sun, 30 Oct 2022 11:09:04 +0100 Fabrice Fontaine wrote: > https://github.com/thom311/libnl/compare/libnl3_6_0...libnl3_7_0 > > Signed-off-by: Fabrice Fontaine > --- > package/libnl/libnl.hash | 4 ++-- > package/libnl/libnl.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:39 +0100 Subject: [Buildroot] [PATCH 1/1] package/libpam-radius-auth: bump to version 2.0.0 In-Reply-To: <20221029212824.315760-1-fontaine.fabrice@gmail.com> References: <20221029212824.315760-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120739.61d91a89@windsurf> On Sat, 29 Oct 2022 23:28:24 +0200 Fabrice Fontaine wrote: > Switch site to get latest release > > https://github.com/FreeRADIUS/pam_radius/blob/release_2_0_0/Changelog > > Signed-off-by: Fabrice Fontaine > --- > package/libpam-radius-auth/libpam-radius-auth.hash | 2 +- > package/libpam-radius-auth/libpam-radius-auth.mk | 5 ++--- > 2 files changed, 3 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:08:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:08:08 +0100 Subject: [Buildroot] [PATCH 1/1] package/liblinear: bump to version 2.45 In-Reply-To: <20221030095228.59110-1-fontaine.fabrice@gmail.com> References: <20221030095228.59110-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120808.440eb7a2@windsurf> On Sun, 30 Oct 2022 10:52:28 +0100 Fabrice Fontaine wrote: > Version 2.45 released on August 11, 2022. Some minor bugs are fixed. > > Drop first patch (not needed since > https://github.com/cjlin1/liblinear/commit/7cf5d6e1c05d3147ee7890865c900757fc42d9ef) > > https://github.com/cjlin1/liblinear/compare/v244...v245 > > Signed-off-by: Fabrice Fontaine > --- > ...0001-blas-don-t-overwrite-ar-options.patch | 36 ------------------- > ...-lib.patch => 0001-build-static-lib.patch} | 0 > package/liblinear/liblinear.hash | 2 +- > package/liblinear/liblinear.mk | 2 +- > 4 files changed, 2 insertions(+), 38 deletions(-) > delete mode 100644 package/liblinear/0001-blas-don-t-overwrite-ar-options.patch > rename package/liblinear/{0002-build-static-lib.patch => 0001-build-static-lib.patch} (100%) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:07:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:07:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/kismet: bump to version 2022-08-R1 In-Reply-To: <20221029210509.265825-1-fontaine.fabrice@gmail.com> References: <20221029210509.265825-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120736.0d439a79@windsurf> On Sat, 29 Oct 2022 23:05:09 +0200 Fabrice Fontaine wrote: > https://www.kismetwireless.net/release/kismet-2022-08-R1/ > > Signed-off-by: Fabrice Fontaine > --- > package/kismet/kismet.hash | 2 +- > package/kismet/kismet.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:09:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:09:25 +0100 Subject: [Buildroot] [git commit] package/lz4: fix static build Message-ID: <20221030110934.151C487473@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=85c20ffa95a145e418e82f7a7106a857b5230a1e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following static build failure raised since bump to version 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: compiling dynamic library 1.9.4 /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': (.text+0x1c): undefined reference to `main' Fixes: - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- .../lz4/0001-build-Support-BUILD_SHARED-no.patch | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/package/lz4/0001-build-Support-BUILD_SHARED-no.patch b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch new file mode 100644 index 0000000000..d2d8639a3b --- /dev/null +++ b/package/lz4/0001-build-Support-BUILD_SHARED-no.patch @@ -0,0 +1,42 @@ +From 5ccbd38277989ae6a728171d59ae03bad6f2f4d5 Mon Sep 17 00:00:00 2001 +From: Fotis Xenakis +Date: Tue, 13 Sep 2022 20:09:36 +0300 +Subject: [PATCH] build: Support BUILD_SHARED=no + +Since e585a438c714652e866a59371b287f52aa4d2dc3, the BUILD_SHARED +Makefile variable only takes effect for the install target (i.e. the +shared libraries always built). This restores the original behaviour. + +[Retrieved from: +https://github.com/lz4/lz4/commit/5ccbd38277989ae6a728171d59ae03bad6f2f4d5] +Signed-off-by: Fabrice Fontaine +--- + lib/Makefile | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/lib/Makefile b/lib/Makefile +index 06503cb2a..ee262c0df 100644 +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -112,17 +112,21 @@ liblz4-dll.o: liblz4-dll.rc + $(WINDRES) -i liblz4-dll.rc -o liblz4-dll.o + + $(LIBLZ4): $(SRCFILES) liblz4-dll.o ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -DLZ4_DLL_EXPORT=1 -shared $^ -o dll/$@.dll -Wl,--out-implib,dll/$(LIBLZ4_EXP) ++endif + + else # not windows + + $(LIBLZ4): $(SRCFILES) ++ifeq ($(BUILD_SHARED),yes) + @echo compiling dynamic library $(LIBVER) + $(CC) $(FLAGS) -shared $^ -fPIC -fvisibility=hidden $(SONAME_FLAGS) -o $@ + @echo creating versioned links + $(LN_SF) $@ liblz4.$(SHARED_EXT_MAJOR) + $(LN_SF) $@ liblz4.$(SHARED_EXT) ++endif + + endif + From thomas.petazzoni at bootlin.com Sun Oct 30 11:09:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:09:41 +0100 Subject: [Buildroot] [PATCH 1/1] package/lz4: fix static build In-Reply-To: <20221028164800.16655-1-fontaine.fabrice@gmail.com> References: <20221028164800.16655-1-fontaine.fabrice@gmail.com> Message-ID: <20221030120941.06aa98ac@windsurf> On Fri, 28 Oct 2022 18:48:00 +0200 Fabrice Fontaine wrote: > Fix the following static build failure raised since bump to version > 1.9.4 in commit 1f54af8c4f814bfc0993756b82575ad581ce5318: > > compiling dynamic library 1.9.4 > /home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start': > (.text+0x1c): undefined reference to `main' > > Fixes: > - http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407 > > Signed-off-by: Fabrice Fontaine > --- > .../0001-build-Support-BUILD_SHARED-no.patch | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 package/lz4/0001-build-Support-BUILD_SHARED-no.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:12 +0100 Subject: [Buildroot] [PATCH] package/sentry-cli: fix build failure by bumping to 2.8.0 In-Reply-To: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> References: <20221026193606.3943977-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030121012.16d94116@windsurf> On Wed, 26 Oct 2022 21:36:05 +0200 Thomas Petazzoni via buildroot wrote: > For a very long time, host-sentry-cli has been failing to build with: > > error[E0512]: cannot transmute between types of different sizes, or dependently-sized types > --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 > | > 176 | mem::transmute::(v4); > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > | > = note: source type: `SocketAddrV4` (48 bits) > = note: target type: `sockaddr_in` (128 bits) > > For more information about this error, try `rustc --explain E0512`. > error: could not compile `socket2` due to previous error > > This socket2 create issue has apparently been fixed by upstream commit > https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, > as it removes/reworks the problematic code. This commit has been part > of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 > in version 0.3.2. > > The next version of sentry-cli that has moved to a more recent > version of socket2 is 1.61.0, however this one also fails to build > with: > > Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) > warning: fields `schemes` and `name` are never read > --> src/utils/xcode.rs:41:5 > | > 39 | pub struct XcodeProjectInfo { > | ---------------- fields in this struct > 40 | targets: Vec, > 41 | schemes: Vec, > | ^^^^^^^ > 42 | configurations: Vec, > 43 | name: String, > | ^^^^ > | > = note: `#[warn(dead_code)]` on by default > = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis > > warning: `sentry-cli` (bin "sentry-cli") generated 1 warning > Finished release [optimized] target(s) in 55.05s > Installing /home/buildroot/buildroot/output/host/bin/sentry-cli > Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) > > So we just gave up, and went for building the very lastest sentry-cli > version, 2.8.0, which apparently builds fine, at least in the > configurations that used to previously fail. > > Yes, such a huge version bump is probably not ideal as a "minimal fix" > to backport on our stable branches, but that's probably the best we > can do without investing too much effort into this package that is > otherwise poorly maintained in Buildroot, as nobody stepped up to > address the issue even though it has been failing for months. > > Fixes: > > http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ > > Signed-off-by: Thomas Petazzoni > --- > package/sentry-cli/sentry-cli.hash | 2 +- > package/sentry-cli/sentry-cli.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:01 +0100 Subject: [Buildroot] [git commit] package/sentry-cli: fix build failure by bumping to 2.8.0 Message-ID: <20221030111047.DF3A587481@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2ee966794a5ab3adfc192525fe07945b671760d2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master For a very long time, host-sentry-cli has been failing to build with: error[E0512]: cannot transmute between types of different sizes, or dependently-sized types --> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9 | 176 | mem::transmute::(v4); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: source type: `SocketAddrV4` (48 bits) = note: target type: `sockaddr_in` (128 bits) For more information about this error, try `rustc --explain E0512`. error: could not compile `socket2` due to previous error This socket2 create issue has apparently been fixed by upstream commit https://github.com/rust-lang/socket2/commit/fd1565af4a82e765754d5baa3ff6e61a2627cabc, as it removes/reworks the problematic code. This commit has been part of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2 in version 0.3.2. The next version of sentry-cli that has moved to a more recent version of socket2 is 1.61.0, however this one also fails to build with: Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0) warning: fields `schemes` and `name` are never read --> src/utils/xcode.rs:41:5 | 39 | pub struct XcodeProjectInfo { | ---------------- fields in this struct 40 | targets: Vec, 41 | schemes: Vec, | ^^^^^^^ 42 | configurations: Vec, 43 | name: String, | ^^^^ | = note: `#[warn(dead_code)]` on by default = note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis warning: `sentry-cli` (bin "sentry-cli") generated 1 warning Finished release [optimized] target(s) in 55.05s Installing /home/buildroot/buildroot/output/host/bin/sentry-cli Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`) So we just gave up, and went for building the very lastest sentry-cli version, 2.8.0, which apparently builds fine, at least in the configurations that used to previously fail. Yes, such a huge version bump is probably not ideal as a "minimal fix" to backport on our stable branches, but that's probably the best we can do without investing too much effort into this package that is otherwise poorly maintained in Buildroot, as nobody stepped up to address the issue even though it has been failing for months. Fixes: http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/ Signed-off-by: Thomas Petazzoni --- package/sentry-cli/sentry-cli.hash | 2 +- package/sentry-cli/sentry-cli.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sentry-cli/sentry-cli.hash b/package/sentry-cli/sentry-cli.hash index 73f818125f..3562199a82 100644 --- a/package/sentry-cli/sentry-cli.hash +++ b/package/sentry-cli/sentry-cli.hash @@ -1,3 +1,3 @@ # locally calculated -sha256 d687336379fd96c4ee73f24bd062d31672bd7453af53311b72977be3c8c78fef sentry-cli-1.59.0.tar.gz +sha256 fa06f9f47782713eef8a4f10b674e2375b9439360ab34b37558ec4b30ec84861 sentry-cli-2.8.0.tar.gz sha256 9503def7b54ceb6e3cd182fd59bc05d3a30d7eae481e65aaba4b495133c83c14 LICENSE diff --git a/package/sentry-cli/sentry-cli.mk b/package/sentry-cli/sentry-cli.mk index 58f5f1e325..15094c2d01 100644 --- a/package/sentry-cli/sentry-cli.mk +++ b/package/sentry-cli/sentry-cli.mk @@ -4,7 +4,7 @@ # ################################################################################ -SENTRY_CLI_VERSION = 1.59.0 +SENTRY_CLI_VERSION = 2.8.0 SENTRY_CLI_SITE = $(call github,getsentry,sentry-cli,$(SENTRY_CLI_VERSION)) SENTRY_CLI_LICENSE = BSD-3-clause SENTRY_CLI_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:39 +0100 Subject: [Buildroot] [git commit] package/nodejs: drop support for the MIPS architecture Message-ID: <20221030111047.E8FE487482@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69d311687abd005dddf3621b7b52a397e75ad8ab branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The build of NodeJS fails on mipsel due to an issue in the V8 code: ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous 4106 | Operand(static_cast(0))); There is apparently a lack of maintenance of the MIPS port of V8, as is discussed in the Github issue at https://github.com/nodejs/node/issues/26179. Until this get improved/fixed, our best option is to drop support for MIPS in our NodeJS package. Fixes: http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ Signed-off-by: Thomas Petazzoni --- package/nodejs/Config.in | 1 - 1 file changed, 1 deletion(-) diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in index 5375dfeacd..1489306be0 100644 --- a/package/nodejs/Config.in +++ b/package/nodejs/Config.in @@ -2,7 +2,6 @@ config BR2_PACKAGE_NODEJS_ARCH_SUPPORTS bool # On ARM, at least ARMv6+ with VFPv2+ is needed default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 && BR2_ARM_CPU_HAS_VFPV2 - default y if BR2_mipsel && !BR2_MIPS_SOFT_FLOAT default y if BR2_aarch64 || BR2_i386 || BR2_x86_64 # libuv depends on BR2_TOOLCHAIN_HAS_SYNC_4 From thomas.petazzoni at bootlin.com Sun Oct 30 11:10:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 12:10:46 +0100 Subject: [Buildroot] [PATCH] package/nodejs: drop support for the MIPS architecture In-Reply-To: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> References: <20221026175705.3928406-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030121046.380d3373@windsurf> On Wed, 26 Oct 2022 19:57:05 +0200 Thomas Petazzoni via buildroot wrote: > The build of NodeJS fails on mipsel due to an issue in the V8 code: > > ../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous > 4106 | Operand(static_cast(0))); > > There is apparently a lack of maintenance of the MIPS port of V8, as > is discussed in the Github issue at > https://github.com/nodejs/node/issues/26179. > > Until this get improved/fixed, our best option is to drop support for > MIPS in our NodeJS package. > > Fixes: > > http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/ > > Signed-off-by: Thomas Petazzoni > --- > package/nodejs/Config.in | 1 - > 1 file changed, 1 deletion(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Sun Oct 30 11:42:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:42:41 +0100 Subject: [Buildroot] [git commit] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE Message-ID: <20221030114429.0F97B8749E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e1550ef755c90ccaa63b9d4ed805e1f85f73142f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master In the internal toolchain backend, we have a choice..endchoice block to allow the user to select the C library, between glibc, uClibc and musl. However, there are situations were no C library at all is supported. In this case, the choice does not appear, and does not allow to see the Config.in comments that are within the choice..endchoice block and that may explain why no C library is available. For example, on RISC-V 32-bit, the only C library supported is glibc, and the minimum kernel header version required by glibc on this architecture is 5.4.0. In a future commit, we are going to add this dependency on glibc (to fix build issues on configurations that have headers < 5.4.0). But since glibc is the only supported C library on RISC-V 32-bit, it means that the choice..endchoice for the C library contains no entry, preventing from seeing the Config.in comment. To address this issue, this commit adds a "dummy" BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the choice..endchoice only when no C library is available. Thanks to this, the choice..endchoice is never empty, and the Config.in comments can be seen. If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the build will anyway abort early because package/Makefile.in has a check to verify that a C library is selected, and aborts the build if not. Some could say that the problem should be resolved by instead preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that is difficult to do as the user can choose a custom header version, or simply specific that (s)he wants to use the headers of the kernel being built. In those situations, it's difficult to prevent selecting headers < 5.4.0. Prevent random configurations from triggering a build failure in our autobuilders, by excluding that symbol from accepted configuration. Signed-off-by: Thomas Petazzoni [yann.morin.1998 at free.fr: update genrandconfig] Signed-off-by: Yann E. MORIN --- toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ utils/genrandconfig | 4 ++++ 2 files changed, 16 insertions(+) diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 6d55f87435..26d731d976 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL https://www.musl-libc.org/ +config BR2_TOOLCHAIN_BUILDROOT_NONE + bool "none" + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ + !BR2_PACKAGE_GLIBC_SUPPORTS && \ + !BR2_PACKAGE_MUSL_SUPPORTS + help + This option is visible if no C library is available for the + currently selected configuration. If you select this option, + the build will refuse to start as Buildroot needs a C + library to build a toolchain. Change your configuration + settings to make sure one of the C libraries is selected. + endchoice config BR2_TOOLCHAIN_BUILDROOT_LIBC diff --git a/utils/genrandconfig b/utils/genrandconfig index e43452d5b7..257fe7b520 100755 --- a/utils/genrandconfig +++ b/utils/genrandconfig @@ -301,6 +301,10 @@ def fixup_config(sysinfo, configfile): if 'BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII=y\n' in configlines and \ 'BR2_PACKAGE_FLANN=y\n' in configlines: return False + # No C library for internal toolchain + if 'BR2_TOOLCHAIN_BUILDROOT_NONE=y' in configlines: + return False + if 'BR2_PACKAGE_AUFS_UTIL=y\n' in configlines and \ 'BR2_PACKAGE_AUFS_UTIL_VERSION=""\n' in configlines: return False From yann.morin.1998 at free.fr Sun Oct 30 11:44:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:44:15 +0100 Subject: [Buildroot] [git commit] package/glibc: headers >= 5.4 needed on RISC-V 32-bit Message-ID: <20221030114429.1C2D48749F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2b3f0153bb5accd1f543a43088a8cf792cda95fc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since glibc 2.33 (upstream commit 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed to build glibc for RISC-V 32-bit. Indeed sysdeps/unix/sysv/linux/riscv/configure.ac contains: if test $libc_cv_riscv_int_abi = ilp32; then arch_minimum_kernel=5.4.0 fi In order to take into account this dependency, we add the appropriate logic in package/glibc/Config.in and toolchain/toolchain-buildroot/Config.in. This change means that if headers < 5.4.0 are selected, then no C library at all will be available for RISC-V 32-bit, as glibc is the only C library supporting RISC-V 32-bit currently. However, thanks to the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the choice...endchoice for the C library selection will not be empty, allowing the user to see the Config.in comment explaining why glibc can't be selected. Therefore, technically this commit does prevent from creating a configuration with RISC-V 32-bit and headers < 5.4.0, but it will have BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by package/Makefile.in, which aborts the build early on pointing out that the configuration is invalid. Fixes: http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ Signed-off-by: Thomas Petazzoni Reviewed-by: Alistair Francis Signed-off-by: Yann E. MORIN --- package/glibc/Config.in | 1 + toolchain/toolchain-buildroot/Config.in | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/package/glibc/Config.in b/package/glibc/Config.in index b63f99b0b4..71c50504ac 100644 --- a/package/glibc/Config.in +++ b/package/glibc/Config.in @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in index 26d731d976..64f7892f98 100644 --- a/toolchain/toolchain-buildroot/Config.in +++ b/toolchain/toolchain-buildroot/Config.in @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" depends on BR2_RISCV_64 depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" + depends on BR2_RISCV_32 + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 + comment "glibc on ARC needs a toolchain w/ headers >= 5.1" depends on BR2_arc depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 From yann.morin.1998 at free.fr Sun Oct 30 11:45:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:45:06 +0100 Subject: [Buildroot] [PATCH 1/2] toolchain/toolchain-buildroot: introduce BR2_TOOLCHAIN_BUILDROOT_NONE In-Reply-To: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030114506.GD1058960@scaer> Thomas, All, On 2022-10-26 20:34 +0200, Thomas Petazzoni via buildroot spake thusly: > In the internal toolchain backend, we have a choice..endchoice block > to allow the user to select the C library, between glibc, uClibc and > musl. > > However, there are situations were no C library at all is > supported. In this case, the choice does not appear, and does not > allow to see the Config.in comments that are within the > choice..endchoice block and that may explain why no C library is > available. > > For example, on RISC-V 32-bit, the only C library supported is glibc, > and the minimum kernel header version required by glibc on this > architecture is 5.4.0. In a future commit, we are going to add this > dependency on glibc (to fix build issues on configurations that have > headers < 5.4.0). But since glibc is the only supported C library on > RISC-V 32-bit, it means that the choice..endchoice for the C library > contains no entry, preventing from seeing the Config.in comment. > > To address this issue, this commit adds a "dummy" > BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the > choice..endchoice only when no C library is available. Thanks to this, > the choice..endchoice is never empty, and the Config.in comments can > be seen. > > If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the > build will anyway abort early because package/Makefile.in has a check > to verify that a C library is selected, and aborts the build if not. > > Some could say that the problem should be resolved by instead > preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that > is difficult to do as the user can choose a custom header version, or > simply specific that (s)he wants to use the headers of the kernel > being built. In those situations, it's difficult to prevent selecting > headers < 5.4.0. > > Signed-off-by: Thomas Petazzoni As discussed on IRC, I added an exclusiong in genrandconfig. Applied to master, thanks. Regards, Yann E. MORIN. > --- > toolchain/toolchain-buildroot/Config.in | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 6d55f87435..26d731d976 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -80,6 +80,18 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL > > https://www.musl-libc.org/ > > +config BR2_TOOLCHAIN_BUILDROOT_NONE > + bool "none" > + depends on !BR2_PACKAGE_UCLIBC_SUPPORTS && \ > + !BR2_PACKAGE_GLIBC_SUPPORTS && \ > + !BR2_PACKAGE_MUSL_SUPPORTS > + help > + This option is visible if no C library is available for the > + currently selected configuration. If you select this option, > + the build will refuse to start as Buildroot needs a C > + library to build a toolchain. Change your configuration > + settings to make sure one of the C libraries is selected. > + > endchoice > > config BR2_TOOLCHAIN_BUILDROOT_LIBC > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 11:45:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 12:45:19 +0100 Subject: [Buildroot] [PATCH 2/2] package/glibc: headers >= 5.4 needed on RISC-V 32-bit In-Reply-To: <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> References: <20221026183427.3933387-1-thomas.petazzoni@bootlin.com> <20221026183427.3933387-2-thomas.petazzoni@bootlin.com> Message-ID: <20221030114519.GE1058960@scaer> Thomas, All, On 2022-10-26 20:34 +0200, Thomas Petazzoni via buildroot spake thusly: > Since glibc 2.33 (upstream commit > 7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed > to build glibc for RISC-V 32-bit. Indeed > sysdeps/unix/sysv/linux/riscv/configure.ac contains: > > if test $libc_cv_riscv_int_abi = ilp32; then > arch_minimum_kernel=5.4.0 > fi > > In order to take into account this dependency, we add the appropriate > logic in package/glibc/Config.in and > toolchain/toolchain-buildroot/Config.in. > > This change means that if headers < 5.4.0 are selected, then no C > library at all will be available for RISC-V 32-bit, as glibc is the > only C library supporting RISC-V 32-bit currently. However, thanks to > the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the > choice...endchoice for the C library selection will not be empty, > allowing the user to see the Config.in comment explaining why glibc > can't be selected. > > Therefore, technically this commit does prevent from creating a > configuration with RISC-V 32-bit and headers < 5.4.0, but it will have > BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by > package/Makefile.in, which aborts the build early on pointing out that > the configuration is invalid. > > Fixes: > > http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/ > > Signed-off-by: Thomas Petazzoni Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/glibc/Config.in | 1 + > toolchain/toolchain-buildroot/Config.in | 4 ++++ > 2 files changed, 5 insertions(+) > > diff --git a/package/glibc/Config.in b/package/glibc/Config.in > index b63f99b0b4..71c50504ac 100644 > --- a/package/glibc/Config.in > +++ b/package/glibc/Config.in > @@ -34,6 +34,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 || !BR2_powerpc64le > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008 > + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_RISCV_32 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64 > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k > diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in > index 26d731d976..64f7892f98 100644 > --- a/toolchain/toolchain-buildroot/Config.in > +++ b/toolchain/toolchain-buildroot/Config.in > @@ -62,6 +62,10 @@ comment "glibc on RISC-V 64-bit needs a toolchain w/ headers >= 5.0" > depends on BR2_RISCV_64 > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 > > +comment "glibc on RISC-V 32-bit needs a toolchain w/ headers >= 5.4" > + depends on BR2_RISCV_32 > + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 > + > comment "glibc on ARC needs a toolchain w/ headers >= 5.1" > depends on BR2_arc > depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From fontaine.fabrice at gmail.com Sun Oct 30 12:53:58 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 13:53:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/kmemd: needs headers >= 5.14 Message-ID: <20221030125358.387628-1-fontaine.fabrice@gmail.com> kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only available since kernel 5.14 and https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 resulting in the following build failure since the addition of the package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ | ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc Signed-off-by: Fabrice Fontaine --- package/kmemd/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in index 902e636947..cd92757508 100644 --- a/package/kmemd/Config.in +++ b/package/kmemd/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_KMEMD depends on BR2_USE_WCHAR # libbpf depends on !BR2_STATIC_LIBS # libbpf depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf select BR2_PACKAGE_LIBBPF help @@ -12,7 +12,7 @@ config BR2_PACKAGE_KMEMD https://github.com/wkz/kmemd -comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 5.14" depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 12:55:54 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 13:55:54 +0100 Subject: [Buildroot] [PATCH 1/1] package/dahdi-linux: fix build with kernel >= 5.18 Message-ID: <20221030125554.394467-1-fontaine.fabrice@gmail.com> Fix the following build failure with kernel >= 5.18 raised since bump to version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ?t4_allocate_buffers?: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ?pci_alloc_consistent? [-Werror=implicit-function-declaration] 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, | ^~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 Signed-off-by: Fabrice Fontaine --- ...lation-issues-on-linux-kernel-5-18-0.patch | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch diff --git a/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch new file mode 100644 index 0000000000..a896def375 --- /dev/null +++ b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch @@ -0,0 +1,58 @@ +From dbb43101c2a9205b67223b006bf75c29ebadced9 Mon Sep 17 00:00:00 2001 +From: Pushkar Singh +Date: Tue, 2 Aug 2022 19:40:00 +0530 +Subject: [PATCH] Fixed compilation issues on linux kernel >= 5.18.0 + +With kernel 5.18 and higher +PCI: Remove the deprecated "pci-dma-compat.h" API + +The commit will make sure to impplement pci dma related api's +[Retrieved from: +https://github.com/asterisk/dahdi-linux/commit/dbb43101c2a9205b67223b006bf75c29ebadced9] +Signed-off-by: Fabrice Fontaine +--- + include/dahdi/kernel.h | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/include/dahdi/kernel.h b/include/dahdi/kernel.h +index ed81e9e3..35e93bc4 100644 +--- a/include/dahdi/kernel.h ++++ b/include/dahdi/kernel.h +@@ -58,6 +58,37 @@ + + #include + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0) ++#include ++#include ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) ++{ ++ return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC); ++} ++ ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) ++{ ++ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle); ++} ++ ++static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) ++{ ++ return dma_map_single(&hwdev->dev, ptr, size, (enum dma_data_direction)direction); ++} ++ ++static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction) ++{ ++ dma_unmap_single(&hwdev->dev, dma_addr, size, (enum dma_data_direction)direction); ++} ++ ++static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ return dma_set_mask(&dev->dev, mask); ++} ++ ++#endif ++ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) + #define HAVE_NET_DEVICE_OPS + #endif -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:01:44 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:01:44 +0100 Subject: [Buildroot] [PATCH 1/1] package/mbuffer: bump to version 20220418 Message-ID: <20221030130144.399291-1-fontaine.fabrice@gmail.com> Signed-off-by: Fabrice Fontaine --- package/mbuffer/mbuffer.hash | 4 ++-- package/mbuffer/mbuffer.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mbuffer/mbuffer.hash b/package/mbuffer/mbuffer.hash index bab568d1d8..8f7b8dd07b 100644 --- a/package/mbuffer/mbuffer.hash +++ b/package/mbuffer/mbuffer.hash @@ -1,8 +1,8 @@ # From http://www.maier-komor.de/mbuffer.html -md5 b6787260112e3ac416c0febdb097caa8 mbuffer-20211018.tgz +md5 90e183efeec2812e2413e97b65600acc mbuffer-20220418.tgz # Locally computed after checking signature upstream -sha256 e240c1e4e4ac14c28be8c660ec47d44ce16b1e8ec92aa907ad13004ffd5db6e3 mbuffer-20211018.tgz +sha256 6e5801f9f5ff11445d1d03028b5a03cd08af5408697b7f94c427833228a300c7 mbuffer-20220418.tgz # Hash for license file sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/mbuffer/mbuffer.mk b/package/mbuffer/mbuffer.mk index bbf27579f1..6381d97e8a 100644 --- a/package/mbuffer/mbuffer.mk +++ b/package/mbuffer/mbuffer.mk @@ -4,7 +4,7 @@ # ################################################################################ -MBUFFER_VERSION = 20211018 +MBUFFER_VERSION = 20220418 MBUFFER_SOURCE = mbuffer-$(MBUFFER_VERSION).tgz MBUFFER_SITE = http://www.maier-komor.de/software/mbuffer MBUFFER_LICENSE = GPL-3.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:07:23 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:07:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/matio: bump to version 1.5.23 Message-ID: <20221030130723.408004-1-fontaine.fabrice@gmail.com> https://github.com/tbeu/matio/releases/tag/v1.5.23 Signed-off-by: Fabrice Fontaine --- package/matio/matio.hash | 4 ++-- package/matio/matio.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/matio/matio.hash b/package/matio/matio.hash index 4634074ca0..94e0e48f69 100644 --- a/package/matio/matio.hash +++ b/package/matio/matio.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/projects/matio/files/matio/1.5.22/ -sha512 33fd3991413e94dfc9aba13ffd08b09ddcbdb9dfa579124d981449e195a8c61a3dc95b55e46bba360d48456c117cf36403af1c3448689c26b8aea5fa9cf38323 matio-1.5.22.tar.gz +# From https://sourceforge.net/projects/matio/files/matio/1.5.23/ +sha512 e125278dcb25695affb7c576d0e2a86c0eff4225aa866b81536c9e4d7b2aea2c554f5389e96d534a8b559f5554b6cbecff4b44fe8915173cd64b2da6d1dc2629 matio-1.5.23.tar.gz # Locally computed sha256 3ed9a50d754fcc92d4accb8448e397eafeab686796b2a7445557ce782806e239 COPYING diff --git a/package/matio/matio.mk b/package/matio/matio.mk index d282852d37..5e09f4e6ce 100644 --- a/package/matio/matio.mk +++ b/package/matio/matio.mk @@ -4,7 +4,7 @@ # ################################################################################ -MATIO_VERSION = 1.5.22 +MATIO_VERSION = 1.5.23 MATIO_SITE = http://downloads.sourceforge.net/project/matio/matio/$(MATIO_VERSION) MATIO_LICENSE = BSD-2-Clause MATIO_LICENSE_FILES = COPYING -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:10:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:10:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/mcelog: bump to version 189 Message-ID: <20221030131048.410237-1-fontaine.fabrice@gmail.com> https://github.com/andikleen/mcelog/releases/tag/v189 https://github.com/andikleen/mcelog/releases/tag/v188 Signed-off-by: Fabrice Fontaine --- package/mcelog/mcelog.hash | 2 +- package/mcelog/mcelog.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mcelog/mcelog.hash b/package/mcelog/mcelog.hash index c64e652453..e0350b085d 100644 --- a/package/mcelog/mcelog.hash +++ b/package/mcelog/mcelog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 02eb3f4cb0976048f191d124fb45a1720caf082cd246d858acb0a39a9d026641 mcelog-187.tar.gz +sha256 30364d134ff416f3f9469720add84bdccea226268d334f06022110f484550cd9 mcelog-189.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/mcelog/mcelog.mk b/package/mcelog/mcelog.mk index de1b76cfd3..8b5876d32e 100644 --- a/package/mcelog/mcelog.mk +++ b/package/mcelog/mcelog.mk @@ -4,7 +4,7 @@ # ################################################################################ -MCELOG_VERSION = 187 +MCELOG_VERSION = 189 MCELOG_SITE = $(call github,andikleen,mcelog,v$(MCELOG_VERSION)) MCELOG_LICENSE = GPL-2.0 MCELOG_LICENSE_FILES = LICENSE -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 13:17:18 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 14:17:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/mongoose: bump to version 7.8 Message-ID: <20221030131718.422677-1-fontaine.fabrice@gmail.com> Update hash of license file (date and URL updated with https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) https://github.com/cesanta/mongoose/releases/tag/7.8 https://github.com/cesanta/mongoose/releases/tag/7.7 https://github.com/cesanta/mongoose/releases/tag/7.6 https://github.com/cesanta/mongoose/releases/tag/7.5 https://github.com/cesanta/mongoose/releases/tag/7.4 https://github.com/cesanta/mongoose/releases/tag/7.3 Signed-off-by: Fabrice Fontaine --- package/mongoose/mongoose.hash | 4 ++-- package/mongoose/mongoose.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mongoose/mongoose.hash b/package/mongoose/mongoose.hash index 809f160cf0..ffef9f446c 100644 --- a/package/mongoose/mongoose.hash +++ b/package/mongoose/mongoose.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8c5024a4e5b5a0c7fdae3c24ebc68e2b3ccfaba08cf25c2e76fc7f14f92fd4a5 mongoose-7.2.tar.gz -sha256 9553d057f2ba980642f2c18d87ed38896cff1c9612d77d684a73a11fe1443b05 LICENSE +sha256 55073dcd427ab9475731ad855e417884f4fbfb24b7d5694f6cabadbee1329f16 mongoose-7.8.tar.gz +sha256 b41c293820074278291813af9f181918154875c94d744a90bf4eec331be28ac5 LICENSE diff --git a/package/mongoose/mongoose.mk b/package/mongoose/mongoose.mk index 2c5df1d0cc..8d06ed4689 100644 --- a/package/mongoose/mongoose.mk +++ b/package/mongoose/mongoose.mk @@ -4,7 +4,7 @@ # ################################################################################ -MONGOOSE_VERSION = 7.2 +MONGOOSE_VERSION = 7.8 MONGOOSE_SITE = $(call github,cesanta,mongoose,$(MONGOOSE_VERSION)) MONGOOSE_LICENSE = GPL-2.0 MONGOOSE_LICENSE_FILES = LICENSE -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 14:00:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:00:35 +0100 Subject: [Buildroot] [PATCH 1/4] package/alsa-lib: disable topology modules for static builds In-Reply-To: <20221028191526.122405-1-bernd.kuhls@t-online.de> References: <20221028191526.122405-1-bernd.kuhls@t-online.de> Message-ID: <20221030150035.48cf618b@windsurf> Hello, On Fri, 28 Oct 2022 21:15:23 +0200 Bernd Kuhls wrote: > With this fix to alsa-lib we can remove a patch from alsa-utils which > fixed its static build. A static build of topology modules is not > supported by upstream however: > > "Note that it does not make sense to build static topology modules. > They are not usable." > https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 > > Signed-off-by: Bernd Kuhls > --- > package/alsa-lib/alsa-lib.mk | 1 + > ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- > package/alsa-utils/alsa-utils.mk | 3 -- > 3 files changed, 1 insertion(+), 51 deletions(-) > delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > > diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk > index f3ed195a5c..6e474aa5e2 100644 > --- a/package/alsa-lib/alsa-lib.mk > +++ b/package/alsa-lib/alsa-lib.mk > @@ -25,6 +25,7 @@ endif > # Can't build with static & shared at the same time (1.0.25+) > ifeq ($(BR2_STATIC_LIBS),y) > ALSA_LIB_CONF_OPTS += \ > + --disable-topology \ I think we should make this an explicit Config.in option of the alsa-lib package, which depends on !BR2_STATIC_LIBS, so that the packages that need that library can then select this option, and properly propagate the !BR2_STATIC_LIBS dependency. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:02:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:02:56 +0100 Subject: [Buildroot] [git commit] package/kmemd: needs headers >= 5.14 Message-ID: <20221030140306.AE89F874AC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cd317f701b60ddbf546504bf3f8aca6b960e05af branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only available since kernel 5.14 and https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 resulting in the following build failure since the addition of the package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ | ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/kmemd/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/kmemd/Config.in b/package/kmemd/Config.in index 902e636947..cd92757508 100644 --- a/package/kmemd/Config.in +++ b/package/kmemd/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_KMEMD depends on BR2_USE_WCHAR # libbpf depends on !BR2_STATIC_LIBS # libbpf depends on BR2_TOOLCHAIN_HAS_THREADS # libbpf - depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13 # libbpf + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_14 depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # libbpf select BR2_PACKAGE_LIBBPF help @@ -12,7 +12,7 @@ config BR2_PACKAGE_KMEMD https://github.com/wkz/kmemd -comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 4.13" +comment "kmemd needs a uClibc or glibc toolchain w/ wchar, dynamic library, threads, headers >= 5.14" depends on BR2_TOOLCHAIN_HAS_SYNC_4 depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS \ || !BR2_TOOLCHAIN_HAS_THREADS \ From thomas.petazzoni at bootlin.com Sun Oct 30 14:02:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:02:56 +0100 Subject: [Buildroot] [git commit] package/dahdi-linux: fix build with kernel >= 5.18 Message-ID: <20221030140306.B89B6874AD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c4db8416ff2c9ace3c79a71ccfa3d942daadd093 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fix the following build failure with kernel >= 5.18 raised since bump to version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ???t4_allocate_buffers???: /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ???pci_alloc_consistent??? [-Werror=implicit-function-declaration] 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, | ^~~~~~~~~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- ...compilation-issues-on-linux-kernel-5-18-0.patch | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch new file mode 100644 index 0000000000..a896def375 --- /dev/null +++ b/package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch @@ -0,0 +1,58 @@ +From dbb43101c2a9205b67223b006bf75c29ebadced9 Mon Sep 17 00:00:00 2001 +From: Pushkar Singh +Date: Tue, 2 Aug 2022 19:40:00 +0530 +Subject: [PATCH] Fixed compilation issues on linux kernel >= 5.18.0 + +With kernel 5.18 and higher +PCI: Remove the deprecated "pci-dma-compat.h" API + +The commit will make sure to impplement pci dma related api's +[Retrieved from: +https://github.com/asterisk/dahdi-linux/commit/dbb43101c2a9205b67223b006bf75c29ebadced9] +Signed-off-by: Fabrice Fontaine +--- + include/dahdi/kernel.h | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +diff --git a/include/dahdi/kernel.h b/include/dahdi/kernel.h +index ed81e9e3..35e93bc4 100644 +--- a/include/dahdi/kernel.h ++++ b/include/dahdi/kernel.h +@@ -58,6 +58,37 @@ + + #include + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0) ++#include ++#include ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) ++{ ++ return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC); ++} ++ ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) ++{ ++ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle); ++} ++ ++static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) ++{ ++ return dma_map_single(&hwdev->dev, ptr, size, (enum dma_data_direction)direction); ++} ++ ++static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction) ++{ ++ dma_unmap_single(&hwdev->dev, dma_addr, size, (enum dma_data_direction)direction); ++} ++ ++static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ return dma_set_mask(&dev->dev, mask); ++} ++ ++#endif ++ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) + #define HAVE_NET_DEVICE_OPS + #endif From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:18 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/kmemd: needs headers >= 5.14 In-Reply-To: <20221030125358.387628-1-fontaine.fabrice@gmail.com> References: <20221030125358.387628-1-fontaine.fabrice@gmail.com> Message-ID: <20221030150318.45f4f1af@windsurf> On Sun, 30 Oct 2022 13:53:58 +0100 Fabrice Fontaine wrote: > kmemd unconditionally uses BPF_PSEUDO_MAP_IDX_VALUE which is only > available since kernel 5.14 and > https://github.com/torvalds/linux/commit/387544bfa291a22383d60b40f887360e2b931ec6 > resulting in the following build failure since the addition of the > package in commit b3f915c6561bcb2f7952faca3bedf1766f299538: > > kmem.c:36:17: error: 'BPF_PSEUDO_MAP_IDX_VALUE' undeclared here (not in a function); did you mean 'BPF_PSEUDO_MAP_VALUE'? > 36 | BPF_PSEUDO_MAP_IDX_VALUE, 0, _idx \ > | ^~~~~~~~~~~~~~~~~~~~~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc > > Signed-off-by: Fabrice Fontaine > --- > package/kmemd/Config.in | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:25 +0100 Subject: [Buildroot] [PATCH 1/1] package/dahdi-linux: fix build with kernel >= 5.18 In-Reply-To: <20221030125554.394467-1-fontaine.fabrice@gmail.com> References: <20221030125554.394467-1-fontaine.fabrice@gmail.com> Message-ID: <20221030150325.41df6969@windsurf> On Sun, 30 Oct 2022 13:55:54 +0100 Fabrice Fontaine wrote: > Fix the following build failure with kernel >= 5.18 raised since bump to > version 3.2.0 in commit 6cbfed0dbf43c5e04e3cc543b642e3c996bfed97: > > /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ?t4_allocate_buffers?: > /home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ?pci_alloc_consistent? [-Werror=implicit-function-declaration] > 3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2, > | ^~~~~~~~~~~~~~~~~~~~ > > Fixes: > - http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463 > > Signed-off-by: Fabrice Fontaine > --- > ...lation-issues-on-linux-kernel-5-18-0.patch | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:55 +0100 Subject: [Buildroot] [git commit] package/python-weasyprint: bump to version 57.0 Message-ID: <20221030140545.42A4987512@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6b897930f503a5a99e031789d8ccf6ca37d9a7b9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-weasyprint/python-weasyprint.hash | 4 ++-- package/python-weasyprint/python-weasyprint.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-weasyprint/python-weasyprint.hash b/package/python-weasyprint/python-weasyprint.hash index 68b895361b..21e58d3677 100644 --- a/package/python-weasyprint/python-weasyprint.hash +++ b/package/python-weasyprint/python-weasyprint.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/weasyprint/json -md5 0a339942d1d238aa0b974c1ec1580c03 weasyprint-56.1.tar.gz -sha256 27f796abce8edebc9e5b3cff2d095a9fa2b0af5766801431659db51203c70b38 weasyprint-56.1.tar.gz +md5 b270213554d781c86b6c3d390b097f2f weasyprint-57.0.tar.gz +sha256 7b6f5cc13819e9a7d8748c1dbf0e8d2444f7a4818a98339f82dccaa822bf911b weasyprint-57.0.tar.gz # Locally computed sha256 checksums sha256 bfd14eccfa6100575460e685556b183399d4bd335904e3c9521b0116d21c54da LICENSE diff --git a/package/python-weasyprint/python-weasyprint.mk b/package/python-weasyprint/python-weasyprint.mk index aff9a31a43..9dd364e1c1 100644 --- a/package/python-weasyprint/python-weasyprint.mk +++ b/package/python-weasyprint/python-weasyprint.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_WEASYPRINT_VERSION = 56.1 +PYTHON_WEASYPRINT_VERSION = 57.0 PYTHON_WEASYPRINT_SOURCE = weasyprint-$(PYTHON_WEASYPRINT_VERSION).tar.gz -PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/30/2c/9c29989bf03bb573bd963c2cf167839099bdaff05aff1f0eff2ccbd1b509 +PYTHON_WEASYPRINT_SITE = https://files.pythonhosted.org/packages/b7/98/cd0df64b306ac901ffd53c50d9d5d79d92cae756b6469fc14771adb39d77 PYTHON_WEASYPRINT_SETUP_TYPE = flit PYTHON_WEASYPRINT_LICENSE = BSD-3-Clause PYTHON_WEASYPRINT_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:56 +0100 Subject: [Buildroot] [git commit] package/python-pydyf: bump to version 0.5.0 Message-ID: <20221030140545.4E0DF87513@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb780a19d05e14188eba0a4fa1e867fb09dd6c92 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-pydyf/python-pydyf.hash | 4 ++-- package/python-pydyf/python-pydyf.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pydyf/python-pydyf.hash b/package/python-pydyf/python-pydyf.hash index 4c80d3fce6..1b37e90e73 100644 --- a/package/python-pydyf/python-pydyf.hash +++ b/package/python-pydyf/python-pydyf.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/pydyf/json -md5 3afeaff9db93af8b317c909196522ddd pydyf-0.3.0.tar.gz -sha256 1aea6c0c97cc7b809efb5427147e168a5404ed76a53d76a3aea590d4ca1b04a3 pydyf-0.3.0.tar.gz +md5 6b2a02162a3f4be9464d7b4043953d33 pydyf-0.5.0.tar.gz +sha256 51e751ae1504037c1fc1f4815119137b011802cd5f6c3539db066c455b14a7e1 pydyf-0.5.0.tar.gz # Locally computed sha256 checksums sha256 75461e438973e1ba0f93a7de9e3fe5b2f49e1ab49251d392878a9cdae8ce7e47 LICENSE diff --git a/package/python-pydyf/python-pydyf.mk b/package/python-pydyf/python-pydyf.mk index ae88a0eb3d..6327a3efe2 100644 --- a/package/python-pydyf/python-pydyf.mk +++ b/package/python-pydyf/python-pydyf.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_PYDYF_VERSION = 0.3.0 +PYTHON_PYDYF_VERSION = 0.5.0 PYTHON_PYDYF_SOURCE = pydyf-$(PYTHON_PYDYF_VERSION).tar.gz -PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/4d/12/3341ead2313889e2bf49b18ab6d65f47f8a8fb82ccb91faaf74f5e51125f +PYTHON_PYDYF_SITE = https://files.pythonhosted.org/packages/f4/4c/6d31b36a46714d8206b8ca84b8dc9aaf42093415b1f50471538552abe501 PYTHON_PYDYF_SETUP_TYPE = flit PYTHON_PYDYF_LICENSE = BSD-3-Clause PYTHON_PYDYF_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:53 +0100 Subject: [Buildroot] [git commit] package/python-ujson: bump to version 5.5.0 Message-ID: <20221030140545.385AD87511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a855e21bcbcabfc6fec0c1c34bc3346180031a34 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to now supported system double-conversion library. Disable built in strip so that stripping is handled by buildroot. Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-ujson/Config.in | 3 ++- package/python-ujson/python-ujson.hash | 4 ++-- package/python-ujson/python-ujson.mk | 10 +++++++--- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/package/python-ujson/Config.in b/package/python-ujson/Config.in index 7af03e6497..31b4d484d8 100644 --- a/package/python-ujson/Config.in +++ b/package/python-ujson/Config.in @@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_UJSON bool "python-ujson" - depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_INSTALL_LIBSTDCPP # double-conversion + select BR2_PACKAGE_DOUBLE_CONVERSION help UltraJSON is an ultra fast JSON encoder and decoder written in pure C with bindings for Python 3. diff --git a/package/python-ujson/python-ujson.hash b/package/python-ujson/python-ujson.hash index e88e273145..27df5aa355 100644 --- a/package/python-ujson/python-ujson.hash +++ b/package/python-ujson/python-ujson.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/ujson/json -md5 2c7ffd2bf23f6f07da3a0cbf5ff5c2f0 ujson-5.2.0.tar.gz -sha256 163191b88842d874e081707d35de2e205e0e396e70fd068d1038879bca8b17ad ujson-5.2.0.tar.gz +md5 73b42e3f4bf3130073cfffbd82608275 ujson-5.5.0.tar.gz +sha256 b25077a971c7da47bd6846a912a747f6963776d90720c88603b1b55d81790780 ujson-5.5.0.tar.gz # Locally computed sha256 checksums sha256 6a00a8f8b4050303368b694147bde1aed9c96bdff869c181dbbf3ccb784a1501 LICENSE.txt diff --git a/package/python-ujson/python-ujson.mk b/package/python-ujson/python-ujson.mk index 8eb5f6a0a7..95cb0ebad1 100644 --- a/package/python-ujson/python-ujson.mk +++ b/package/python-ujson/python-ujson.mk @@ -4,12 +4,16 @@ # ################################################################################ -PYTHON_UJSON_VERSION = 5.2.0 +PYTHON_UJSON_VERSION = 5.5.0 PYTHON_UJSON_SOURCE = ujson-$(PYTHON_UJSON_VERSION).tar.gz -PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/e4/fc/2dee0e78162aa1ad03dadde9a9b5c281d6f8bb0eed6810a270486d8fc041 +PYTHON_UJSON_SITE = https://files.pythonhosted.org/packages/6e/4a/03ddad85a10dd52e209993a14afa0cb0dc5c348e4647329f1c53856ad9e6 PYTHON_UJSON_SETUP_TYPE = setuptools PYTHON_UJSON_LICENSE = BSD-3-Clause PYTHON_UJSON_LICENSE_FILES = LICENSE.txt -PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm +PYTHON_UJSON_DEPENDENCIES = host-python-setuptools-scm double-conversion +PYTHON_UJSON_ENV = \ + UJSON_BUILD_DC_INCLUDES="$(STAGING_DIR)/usr/include/double-conversion" \ + UJSON_BUILD_DC_LIBS="-ldouble-conversion" \ + UJSON_BUILD_NO_STRIP=1 $(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:50 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:50 +0100 Subject: [Buildroot] [git commit] package/python-aiohttp-session: bump to version 2.12.0 Message-ID: <20221030140545.24A218750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ff89dab6a0947a45a0be11cc90f4902a5e3d037d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiohttp-session/python-aiohttp-session.hash b/package/python-aiohttp-session/python-aiohttp-session.hash index 8b44318307..efdac39007 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.hash +++ b/package/python-aiohttp-session/python-aiohttp-session.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiohttp-session/json -md5 797273eb5f0ef9e95fa92c6a933cf4ad aiohttp-session-2.11.0.tar.gz -sha256 0fdf39600f6a05c4943ef6c7b099071ca9854413111a26761626244be5015dc4 aiohttp-session-2.11.0.tar.gz +md5 b89bde69f6f3c61a991ff408d2733838 aiohttp-session-2.12.0.tar.gz +sha256 0ccd11a7c77cb9e5a61f4daacdc9170d561112f9cfaf9e9a2d9867c0587d1950 aiohttp-session-2.12.0.tar.gz # Locally computed sha256 checksums sha256 7bc5dd2f229a6b922befb1427fd4ad2c0b255f12c1b1869370ba77520dc22bc7 LICENSE diff --git a/package/python-aiohttp-session/python-aiohttp-session.mk b/package/python-aiohttp-session/python-aiohttp-session.mk index 3d59b75e3d..55bf0e87f3 100644 --- a/package/python-aiohttp-session/python-aiohttp-session.mk +++ b/package/python-aiohttp-session/python-aiohttp-session.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOHTTP_SESSION_VERSION = 2.11.0 +PYTHON_AIOHTTP_SESSION_VERSION = 2.12.0 PYTHON_AIOHTTP_SESSION_SOURCE = aiohttp-session-$(PYTHON_AIOHTTP_SESSION_VERSION).tar.gz -PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/3b/a7/0b97b9a2e3a553a86a6703f86b0e9b1afb2b262849700e8f80015c0f643f +PYTHON_AIOHTTP_SESSION_SITE = https://files.pythonhosted.org/packages/34/87/8dbc1385c875497d6bc16c9d94e25dbd8ff62599843b73fb4048ba74c867 PYTHON_AIOHTTP_SESSION_SETUP_TYPE = setuptools PYTHON_AIOHTTP_SESSION_LICENSE = Apache-2.0 PYTHON_AIOHTTP_SESSION_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:01 +0100 Subject: [Buildroot] [git commit] package/python-certifi: bump to version 2022.9.24 Message-ID: <20221030140545.6D60A87511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9af3c14b18c72d6681315280d89d428b7b212ab7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-certifi/python-certifi.hash | 4 ++-- package/python-certifi/python-certifi.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-certifi/python-certifi.hash b/package/python-certifi/python-certifi.hash index ac3d0a909b..0557a5c97c 100644 --- a/package/python-certifi/python-certifi.hash +++ b/package/python-certifi/python-certifi.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/certifi/json -md5 f919a230b999ebae1969088ca68e8367 certifi-2022.9.14.tar.gz -sha256 36973885b9542e6bd01dea287b2b4b3b21236307c56324fcc3f1160f2d655ed5 certifi-2022.9.14.tar.gz +md5 ff9c8d5c7e7fb083de6b874609c5ca68 certifi-2022.9.24.tar.gz +sha256 0d9c601124e5a6ba9712dbc60d9c53c21e34f5f641fe83002317394311bdce14 certifi-2022.9.24.tar.gz # Locally computed sha256 checksums sha256 a02f6c638f9fb84d06f7764c3ab085d8af7eda5b93c166da54312479077c6fb0 LICENSE diff --git a/package/python-certifi/python-certifi.mk b/package/python-certifi/python-certifi.mk index 2053d5e820..8e2435199f 100644 --- a/package/python-certifi/python-certifi.mk +++ b/package/python-certifi/python-certifi.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CERTIFI_VERSION = 2022.9.14 +PYTHON_CERTIFI_VERSION = 2022.9.24 PYTHON_CERTIFI_SOURCE = certifi-$(PYTHON_CERTIFI_VERSION).tar.gz -PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/ca/48/88ec470f8b68319b6782ca3a0570789886ad5ca24c1af2f3771699135baa +PYTHON_CERTIFI_SITE = https://files.pythonhosted.org/packages/cb/a4/7de7cd59e429bd0ee6521ba58a75adaec136d32f91a761b28a11d8088d44 PYTHON_CERTIFI_SETUP_TYPE = setuptools PYTHON_CERTIFI_LICENSE = ISC (Python code), MPL-2.0 (cacert.pem) PYTHON_CERTIFI_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:02 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:02 +0100 Subject: [Buildroot] [git commit] package/python-charset-normalizer: bump to version 3.0.0 Message-ID: <20221030140545.7787E87512@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0511458dc1ef0dd9bc65d674e6a1700f55c883e3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- package/python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-charset-normalizer/python-charset-normalizer.hash b/package/python-charset-normalizer/python-charset-normalizer.hash index 3d50b2872d..32d8a22e66 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.hash +++ b/package/python-charset-normalizer/python-charset-normalizer.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/charset-normalizer/json -md5 a70f9fc85b6b8265c982eca6fe51381f charset-normalizer-2.1.1.tar.gz -sha256 5a3d016c7c547f69d6f81fb0db9449ce888b418b5b9952cc5e6e66843e9dd845 charset-normalizer-2.1.1.tar.gz +md5 169527085be8e6bb7874164c24481eca charset-normalizer-3.0.0.tar.gz +sha256 b27d10ad15740b45fd55f76e6901a4391e6dca3917ef48ecdcf17edf6e00d770 charset-normalizer-3.0.0.tar.gz # Locally computed sha256 checksums sha256 eb31a0c5a4fb09b8a4e32055d25c1e5f9c358a2752fef3cd720213d1ccfee241 LICENSE diff --git a/package/python-charset-normalizer/python-charset-normalizer.mk b/package/python-charset-normalizer/python-charset-normalizer.mk index 72728a25b3..b2c42a74b8 100644 --- a/package/python-charset-normalizer/python-charset-normalizer.mk +++ b/package/python-charset-normalizer/python-charset-normalizer.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CHARSET_NORMALIZER_VERSION = 2.1.1 +PYTHON_CHARSET_NORMALIZER_VERSION = 3.0.0 PYTHON_CHARSET_NORMALIZER_SOURCE = charset-normalizer-$(PYTHON_CHARSET_NORMALIZER_VERSION).tar.gz -PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/a1/34/44964211e5410b051e4b8d2869c470ae8a68ae274953b1c7de6d98bbcf94 +PYTHON_CHARSET_NORMALIZER_SITE = https://files.pythonhosted.org/packages/fe/77/6d5d367b7cfee812a88573e80bbe25cea2d015ed2c3490e4464951ff3232 PYTHON_CHARSET_NORMALIZER_SETUP_TYPE = setuptools PYTHON_CHARSET_NORMALIZER_LICENSE = MIT PYTHON_CHARSET_NORMALIZER_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:59 +0100 Subject: [Buildroot] [git commit] package/python-attrs: bump to version 22.1.0 Message-ID: <20221030140545.63B1487510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=de4a180b80905ee74a064d0fbc74d8de4fea7464 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to ownership clarification: https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-attrs/python-attrs.hash | 6 +++--- package/python-attrs/python-attrs.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-attrs/python-attrs.hash b/package/python-attrs/python-attrs.hash index 823a9459bd..d5548c0ed3 100644 --- a/package/python-attrs/python-attrs.hash +++ b/package/python-attrs/python-attrs.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/attrs/json -md5 5a9b5e9ceebc380a13fb93235b11bbda attrs-21.4.0.tar.gz -sha256 626ba8234211db98e869df76230a137c4c40a12d72445c45d5f5b716f076e2fd attrs-21.4.0.tar.gz +md5 0487081b7ead8753fc46cf7c6d1e28e3 attrs-22.1.0.tar.gz +sha256 29adc2665447e5191d0e7c568fde78b21f9672d344281d0c6e1ab085429b22b6 attrs-22.1.0.tar.gz # Locally computed sha256 checksums -sha256 bf659a28b49240602f56bbdf490cbe2ec509b15b98f99d7b19a52c740e327863 LICENSE +sha256 882115c95dfc2af1eeb6714f8ec6d5cbcabf667caff8729f42420da63f714e9f LICENSE diff --git a/package/python-attrs/python-attrs.mk b/package/python-attrs/python-attrs.mk index 4877d62285..33651ee80a 100644 --- a/package/python-attrs/python-attrs.mk +++ b/package/python-attrs/python-attrs.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_ATTRS_VERSION = 21.4.0 +PYTHON_ATTRS_VERSION = 22.1.0 PYTHON_ATTRS_SOURCE = attrs-$(PYTHON_ATTRS_VERSION).tar.gz -PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/d7/77/ebb15fc26d0f815839ecd897b919ed6d85c050feeb83e100e020df9153d2 +PYTHON_ATTRS_SITE = https://files.pythonhosted.org/packages/1a/cb/c4ffeb41e7137b23755a45e1bfec9cbb76ecf51874c6f1d113984ecaa32c PYTHON_ATTRS_SETUP_TYPE = setuptools PYTHON_ATTRS_LICENSE = MIT PYTHON_ATTRS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:52 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:52 +0100 Subject: [Buildroot] [git commit] package/python-typing-extensions: bump to version 4.4.0 Message-ID: <20221030140545.2D79287510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f3f71a4f6cede1b3461deccdf99c06017df56afa branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash changed due to date/formatting updates: https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-typing-extensions/python-typing-extensions.hash | 6 +++--- package/python-typing-extensions/python-typing-extensions.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/python-typing-extensions/python-typing-extensions.hash b/package/python-typing-extensions/python-typing-extensions.hash index 2512ed042d..249bb63a42 100644 --- a/package/python-typing-extensions/python-typing-extensions.hash +++ b/package/python-typing-extensions/python-typing-extensions.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/typing_extensions/json -md5 30ff8c89459dd93970a92a90b0386aba typing_extensions-4.3.0.tar.gz -sha256 e6d2677a32f47fc7eb2795db1dd15c1f34eff616bcaf2cfb5e997f854fa1c4a6 typing_extensions-4.3.0.tar.gz +md5 5cfcb56ea6fc4972c3600c0030f4d136 typing_extensions-4.4.0.tar.gz +sha256 1511434bb92bf8dd198c12b1cc812e800d4181cfcb867674e0f8279cc93087aa typing_extensions-4.4.0.tar.gz # Locally computed sha256 checksums -sha256 ff17ce94e102024deb68773eb1cc74ca76da4e658f373531f0ac22d68a6bb1ad LICENSE +sha256 c7afb65e755707b9fb90487389a176d3ed3d0031d5131afde45c23715ff5e891 LICENSE diff --git a/package/python-typing-extensions/python-typing-extensions.mk b/package/python-typing-extensions/python-typing-extensions.mk index 2b8c23f354..fd7d0bd93a 100644 --- a/package/python-typing-extensions/python-typing-extensions.mk +++ b/package/python-typing-extensions/python-typing-extensions.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TYPING_EXTENSIONS_VERSION = 4.3.0 +PYTHON_TYPING_EXTENSIONS_VERSION = 4.4.0 PYTHON_TYPING_EXTENSIONS_SOURCE = typing_extensions-$(PYTHON_TYPING_EXTENSIONS_VERSION).tar.gz -PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/9e/1d/d128169ff58c501059330f1ad96ed62b79114a2eb30b8238af63a2e27f70 +PYTHON_TYPING_EXTENSIONS_SITE = https://files.pythonhosted.org/packages/e3/a7/8f4e456ef0adac43f452efc2d0e4b242ab831297f1bac60ac815d37eb9cf PYTHON_TYPING_EXTENSIONS_SETUP_TYPE = flit PYTHON_TYPING_EXTENSIONS_LICENSE = Python-2.0 PYTHON_TYPING_EXTENSIONS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:06 +0100 Subject: [Buildroot] [git commit] package/python-tinycss2: bump to version 1.2.1 Message-ID: <20221030140545.95D7787511@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f50d96114ba5c039292653b3b519bcc3ab48fe2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-tinycss2/python-tinycss2.hash | 4 ++-- package/python-tinycss2/python-tinycss2.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-tinycss2/python-tinycss2.hash b/package/python-tinycss2/python-tinycss2.hash index e8e1d93f83..f9b638df6c 100644 --- a/package/python-tinycss2/python-tinycss2.hash +++ b/package/python-tinycss2/python-tinycss2.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/tinycss2/json -md5 60272f58f8d5834b2e09ffbc9bd5de53 tinycss2-1.1.1.tar.gz -sha256 b2e44dd8883c360c35dd0d1b5aad0b610e5156c2cb3b33434634e539ead9d8bf tinycss2-1.1.1.tar.gz +md5 e8a06102e7f42ca791463f11ce7b814d tinycss2-1.2.1.tar.gz +sha256 8cff3a8f066c2ec677c06dbc7b45619804a6938478d9d73c284b29d14ecb0627 tinycss2-1.2.1.tar.gz # Locally computed sha256 checksums sha256 6b94acee20ec9f2709333134f3ba70322535fb420af0ce8c1455d9cbe297f1d5 LICENSE diff --git a/package/python-tinycss2/python-tinycss2.mk b/package/python-tinycss2/python-tinycss2.mk index e4fc5dc9c5..de26639587 100644 --- a/package/python-tinycss2/python-tinycss2.mk +++ b/package/python-tinycss2/python-tinycss2.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_TINYCSS2_VERSION = 1.1.1 +PYTHON_TINYCSS2_VERSION = 1.2.1 PYTHON_TINYCSS2_SOURCE = tinycss2-$(PYTHON_TINYCSS2_VERSION).tar.gz -PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/1e/5a/576828164b5486f319c4323915b915a8af3fa4a654bbb6f8fc8e87b5cb17 +PYTHON_TINYCSS2_SITE = https://files.pythonhosted.org/packages/75/be/24179dfaa1d742c9365cbd0e3f0edc5d3aa3abad415a2327c5a6ff8ca077 PYTHON_TINYCSS2_SETUP_TYPE = flit PYTHON_TINYCSS2_LICENSE = BSD-3-Clause PYTHON_TINYCSS2_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:03 +0100 Subject: [Buildroot] [git commit] package/python-cssutils: bump to version 2.6.0 Message-ID: <20221030140545.81DA28750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=32441017b56c2b9580c733834211716886c5fa6e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-cssutils/python-cssutils.hash | 4 ++-- package/python-cssutils/python-cssutils.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-cssutils/python-cssutils.hash b/package/python-cssutils/python-cssutils.hash index a3d2a6be6c..cb989131a3 100644 --- a/package/python-cssutils/python-cssutils.hash +++ b/package/python-cssutils/python-cssutils.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/cssutils/json -md5 974bf7f07d52f92dd29485b6e7529aac cssutils-2.5.1.tar.gz -sha256 b4a4da58e78326ec9f4a9d3555004ddf706f3e99f7a1026c1880f0934362b8b4 cssutils-2.5.1.tar.gz +md5 b01ea364e79eada181c3ae46d69249af cssutils-2.6.0.tar.gz +sha256 f7dcd23c1cec909fdf3630de346e1413b7b2555936dec14ba2ebb9913bf0818e cssutils-2.6.0.tar.gz # Locally computed sha256 checksums sha256 03c570a068086ee577dcd795519ea93462b2ed2fcb6dcc4dfce56a71a2fd6e5a COPYING.LESSER diff --git a/package/python-cssutils/python-cssutils.mk b/package/python-cssutils/python-cssutils.mk index 3acf26b3d5..fff9e393f3 100644 --- a/package/python-cssutils/python-cssutils.mk +++ b/package/python-cssutils/python-cssutils.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_CSSUTILS_VERSION = 2.5.1 +PYTHON_CSSUTILS_VERSION = 2.6.0 PYTHON_CSSUTILS_SOURCE = cssutils-$(PYTHON_CSSUTILS_VERSION).tar.gz -PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/bd/f0/d3a02af54f292fe9d1f6bb18c7d2f79992b5cbae0db1ee91e5c73a3c7d7c +PYTHON_CSSUTILS_SITE = https://files.pythonhosted.org/packages/43/d5/505d96b7456fd334f8b963c05bd9425dacd317e209bb9adf103613339325 PYTHON_CSSUTILS_LICENSE = LGPL-3.0+ PYTHON_CSSUTILS_LICENSE_FILES = COPYING.LESSER PYTHON_CSSUTILS_SETUP_TYPE = setuptools From thomas.petazzoni at bootlin.com Sun Oct 30 14:04:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:04:04 +0100 Subject: [Buildroot] [git commit] package/python-fonttools: bump to version 4.38.0 Message-ID: <20221030140545.8C00C87510@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=13f161aa19fac4c9046e353a5d174b773cae8dde branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-fonttools/python-fonttools.hash | 4 ++-- package/python-fonttools/python-fonttools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-fonttools/python-fonttools.hash b/package/python-fonttools/python-fonttools.hash index 58603f79a4..4b4751dc82 100644 --- a/package/python-fonttools/python-fonttools.hash +++ b/package/python-fonttools/python-fonttools.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/fonttools/json -md5 6cad81799e0491751cda0a98642b00eb fonttools-4.37.3.zip -sha256 f32ef6ec966cf0e7d2aa88601fed2e3a8f2851c26b5db2c80ccc8f82bee4eedc fonttools-4.37.3.zip +md5 f4775967d29b0da2f29ba499eed34f88 fonttools-4.38.0.zip +sha256 2bb244009f9bf3fa100fc3ead6aeb99febe5985fa20afbfbaa2f8946c2fbdaf1 fonttools-4.38.0.zip # Locally computed sha256 checksums sha256 6787208f83f659ccbc2223b2fde952ffa6f7e8aca62f1a8a2bf5bc51bb1b2383 LICENSE diff --git a/package/python-fonttools/python-fonttools.mk b/package/python-fonttools/python-fonttools.mk index aad1765899..d31d3a2889 100644 --- a/package/python-fonttools/python-fonttools.mk +++ b/package/python-fonttools/python-fonttools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FONTTOOLS_VERSION = 4.37.3 +PYTHON_FONTTOOLS_VERSION = 4.38.0 PYTHON_FONTTOOLS_SOURCE = fonttools-$(PYTHON_FONTTOOLS_VERSION).zip -PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/c1/0d/d41b9c2295e1896f4c89e6b213790eee8e8e641b3e9709518f2bddcdeffa +PYTHON_FONTTOOLS_SITE = https://files.pythonhosted.org/packages/55/5c/a4a25cf6db42d113d8f626901bb156b2f7cf7c7564a6bbc7b5cd6f7cb484 PYTHON_FONTTOOLS_SETUP_TYPE = setuptools PYTHON_FONTTOOLS_LICENSE = MIT PYTHON_FONTTOOLS_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:03:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:03:58 +0100 Subject: [Buildroot] [git commit] package/python-aiofiles: bump to version 22.1.0 Message-ID: <20221030140545.59A5C8750F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=987c27510f7949807e93ceb573b4d2ee00abb35c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-aiofiles/python-aiofiles.hash | 4 ++-- package/python-aiofiles/python-aiofiles.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-aiofiles/python-aiofiles.hash b/package/python-aiofiles/python-aiofiles.hash index 268136a406..d1594c3989 100644 --- a/package/python-aiofiles/python-aiofiles.hash +++ b/package/python-aiofiles/python-aiofiles.hash @@ -1,5 +1,5 @@ # md5, sha256 from https://pypi.org/pypi/aiofiles/json -md5 697deeb4fdcb620c45f114f173ed7c0d aiofiles-0.8.0.tar.gz -sha256 8334f23235248a3b2e83b2c3a78a22674f39969b96397126cc93664d9a901e59 aiofiles-0.8.0.tar.gz +md5 b22db90039c881f6aa64431c6b23f30f aiofiles-22.1.0.tar.gz +sha256 9107f1ca0b2a5553987a94a3c9959fe5b491fdf731389aa5b7b1bd0733e32de6 aiofiles-22.1.0.tar.gz # Locally computed sha256 checksums sha256 cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14 LICENSE diff --git a/package/python-aiofiles/python-aiofiles.mk b/package/python-aiofiles/python-aiofiles.mk index 996e5eb6c0..b65d2cfa82 100644 --- a/package/python-aiofiles/python-aiofiles.mk +++ b/package/python-aiofiles/python-aiofiles.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_AIOFILES_VERSION = 0.8.0 +PYTHON_AIOFILES_VERSION = 22.1.0 PYTHON_AIOFILES_SOURCE = aiofiles-$(PYTHON_AIOFILES_VERSION).tar.gz -PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/10/ca/c416cfacf6a47e1400dad56eab85aa86c92c6fbe58447d12035e434f0d5c +PYTHON_AIOFILES_SITE = https://files.pythonhosted.org/packages/86/26/6e5060a159a6131c430e8a01ec8327405a19a449a506224b394e36f2ebc9 PYTHON_AIOFILES_SETUP_TYPE = setuptools PYTHON_AIOFILES_LICENSE = Apache-2.0 PYTHON_AIOFILES_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:10 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-aiohttp-session: bump to version 2.12.0 In-Reply-To: <20221029000437.1305667-1-james.hilliard1@gmail.com> References: <20221029000437.1305667-1-james.hilliard1@gmail.com> Message-ID: <20221030150610.45389260@windsurf> On Fri, 28 Oct 2022 18:04:37 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-aiohttp-session/python-aiohttp-session.hash | 4 ++-- > package/python-aiohttp-session/python-aiohttp-session.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:15 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-typing-extensions: bump to version 4.4.0 In-Reply-To: <20221029001917.1312839-1-james.hilliard1@gmail.com> References: <20221029001917.1312839-1-james.hilliard1@gmail.com> Message-ID: <20221030150615.40fb7516@windsurf> On Fri, 28 Oct 2022 18:19:17 -0600 James Hilliard wrote: > License hash changed due to date/formatting updates: > https://github.com/python/typing_extensions/commit/fb77519b198f9d610ee8f674e27b8ce1da00f61f > > Signed-off-by: James Hilliard > --- > .../python-typing-extensions/python-typing-extensions.hash | 6 +++--- > .../python-typing-extensions/python-typing-extensions.mk | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-ujson: bump to version 5.5.0 In-Reply-To: <20221029010036.1388698-1-james.hilliard1@gmail.com> References: <20221029010036.1388698-1-james.hilliard1@gmail.com> Message-ID: <20221030150621.153d0e8c@windsurf> On Fri, 28 Oct 2022 19:00:36 -0600 James Hilliard wrote: > Switch to now supported system double-conversion library. > > Disable built in strip so that stripping is handled by buildroot. > > Signed-off-by: James Hilliard > --- > package/python-ujson/Config.in | 3 ++- > package/python-ujson/python-ujson.hash | 4 ++-- > package/python-ujson/python-ujson.mk | 10 +++++++--- > 3 files changed, 11 insertions(+), 6 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:27 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-weasyprint: bump to version 57.0 In-Reply-To: <20221029010612.1391444-1-james.hilliard1@gmail.com> References: <20221029010612.1391444-1-james.hilliard1@gmail.com> Message-ID: <20221030150627.6336eb1e@windsurf> On Fri, 28 Oct 2022 19:06:12 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-weasyprint/python-weasyprint.hash | 4 ++-- > package/python-weasyprint/python-weasyprint.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pydyf: bump to version 0.5.0 In-Reply-To: <20221029011039.1393998-1-james.hilliard1@gmail.com> References: <20221029011039.1393998-1-james.hilliard1@gmail.com> Message-ID: <20221030150632.1241e9ea@windsurf> On Fri, 28 Oct 2022 19:10:39 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-pydyf/python-pydyf.hash | 4 ++-- > package/python-pydyf/python-pydyf.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:37 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:37 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-aiofiles: bump to version 22.1.0 In-Reply-To: <20221029011424.1394984-1-james.hilliard1@gmail.com> References: <20221029011424.1394984-1-james.hilliard1@gmail.com> Message-ID: <20221030150637.270c7260@windsurf> On Fri, 28 Oct 2022 19:14:24 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-aiofiles/python-aiofiles.hash | 4 ++-- > package/python-aiofiles/python-aiofiles.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:42 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-attrs: bump to version 22.1.0 In-Reply-To: <20221029012020.1396608-1-james.hilliard1@gmail.com> References: <20221029012020.1396608-1-james.hilliard1@gmail.com> Message-ID: <20221030150642.55d8d801@windsurf> On Fri, 28 Oct 2022 19:20:20 -0600 James Hilliard wrote: > License hash changed due to ownership clarification: > https://github.com/python-attrs/attrs/commit/899497f165b3c8291b66c9c3a01b64881b69cf39 > > Signed-off-by: James Hilliard > --- > package/python-attrs/python-attrs.hash | 6 +++--- > package/python-attrs/python-attrs.mk | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-certifi: bump to version 2022.9.24 In-Reply-To: <20221029012321.1398031-1-james.hilliard1@gmail.com> References: <20221029012321.1398031-1-james.hilliard1@gmail.com> Message-ID: <20221030150647.339a2e18@windsurf> On Fri, 28 Oct 2022 19:23:21 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-certifi/python-certifi.hash | 4 ++-- > package/python-certifi/python-certifi.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:06:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:06:54 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-charset-normalizer: bump to version 3.0.0 In-Reply-To: <20221029012704.1399837-1-james.hilliard1@gmail.com> References: <20221029012704.1399837-1-james.hilliard1@gmail.com> Message-ID: <20221030150654.24260b34@windsurf> On Fri, 28 Oct 2022 19:27:04 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > .../python-charset-normalizer/python-charset-normalizer.hash | 4 ++-- > .../python-charset-normalizer/python-charset-normalizer.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:04 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-cssutils: bump to version 2.6.0 In-Reply-To: <20221029013321.1403408-1-james.hilliard1@gmail.com> References: <20221029013321.1403408-1-james.hilliard1@gmail.com> Message-ID: <20221030150704.77779645@windsurf> On Fri, 28 Oct 2022 19:33:21 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-cssutils/python-cssutils.hash | 4 ++-- > package/python-cssutils/python-cssutils.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:11 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-fonttools: bump to version 4.38.0 In-Reply-To: <20221029013717.1406350-1-james.hilliard1@gmail.com> References: <20221029013717.1406350-1-james.hilliard1@gmail.com> Message-ID: <20221030150711.088541ee@windsurf> On Fri, 28 Oct 2022 19:37:17 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-fonttools/python-fonttools.hash | 4 ++-- > package/python-fonttools/python-fonttools.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:07:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:07:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-tinycss2: bump to version 1.2.1 In-Reply-To: <20221029014217.1408835-1-james.hilliard1@gmail.com> References: <20221029014217.1408835-1-james.hilliard1@gmail.com> Message-ID: <20221030150717.07a75acd@windsurf> On Fri, 28 Oct 2022 19:42:17 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-tinycss2/python-tinycss2.hash | 4 ++-- > package/python-tinycss2/python-tinycss2.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 14:09:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:09:07 +0100 Subject: [Buildroot] [git commit] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 Message-ID: <20221030140917.DDC7B87515@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=abf2593ead935d07d7d2eaad2a74a4f31f59012a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Let's also drop local patch in favor of the upstream pending patch we already use for package rtl8189es to deal with endianness. Fixes: http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- ...ve-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 ++++++++++++++++++++++ .../0001-Makefile-remove-default-endianness.patch | 30 ---------------- package/rtl8189fs/rtl8189fs.hash | 2 +- package/rtl8189fs/rtl8189fs.mk | 9 +++-- 4 files changed, 48 insertions(+), 33 deletions(-) diff --git a/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch new file mode 100644 index 0000000000..dc4deff9f1 --- /dev/null +++ b/package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch @@ -0,0 +1,40 @@ +From 4a555ffb77a5947814b6c7f330968318e265c496 Mon Sep 17 00:00:00 2001 +From: Giulio Benetti +Date: Wed, 28 Sep 2022 21:17:17 +0200 +Subject: [PATCH] Makefile: move 'EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)' at the + end of EXTRA_FLAGS assignment + +At the moment USER_EXTRA_CFLAGS can't override local Makfile EXTRA_CFLAGS +since it's assigned at the beginning of the Makefile. For example it's not +possible to undefine the hardcoded CONFIG_LITTLE_ENDIAN and this doesn't +allow to build these modules for big endian architectures. So let's move +the assignment of USER_EXTRA_CFLAGS to EXTRA_CFLAGS after the last +EXTRA_CFLAGS assignment. + +Signed-off-by: Giulio Benetti +[Upstream status: https://github.com/jwrdegoede/rtl8189ES_linux/pull/83] +--- + Makefile | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/Makefile b/Makefile +index 8fcb7bd..e4664e9 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,4 +1,3 @@ +-EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 + #EXTRA_CFLAGS += -Wall +@@ -2239,6 +2238,8 @@ ifneq ($(USER_MODULE_NAME),) + MODULE_NAME := $(USER_MODULE_NAME) + endif + ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++ + ifneq ($(KERNELRELEASE),) + + ########### this part for *.mk ############################ +-- +2.34.1 + diff --git a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch b/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch deleted file mode 100644 index 47e42415eb..0000000000 --- a/package/rtl8189fs/0001-Makefile-remove-default-endianness.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 480d9da302885d9e8b3d1f9c68def569e3c8a8c0 Mon Sep 17 00:00:00 2001 -From: Sergey Matyukevich -Date: Mon, 9 May 2022 00:17:21 +0300 -Subject: [PATCH] Makefile: remove default endianness - -There is no way to remove configuration options from EXTRA_CFLAGS -without editing Makefile. So default LE configuration can not be -conveniently replaced by BE. Remove default endianness from the -Makefile to enable its configuration via USER_EXTRA_CFLAGS. - -Signed-off-by: Sergey Matyukevich ---- - Makefile | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/Makefile b/Makefile -index dfca305..fde4e6b 100644 ---- a/Makefile -+++ b/Makefile -@@ -22,7 +22,6 @@ endif - - EXTRA_CFLAGS += -I$(src)/include - --EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN - EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT - - EXTRA_LDFLAGS += --strip-debug --- -2.35.1 - diff --git a/package/rtl8189fs/rtl8189fs.hash b/package/rtl8189fs/rtl8189fs.hash index d5d18a8ba8..1ab41db553 100644 --- a/package/rtl8189fs/rtl8189fs.hash +++ b/package/rtl8189fs/rtl8189fs.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 41eee18d8a4289c2eac07af3224c62214a9b694a717bf497cd34a95b955f3d49 rtl8189fs-94a61cbf46ce87b7c9b8aa53123aeb142133a3c9.tar.gz +sha256 7cc80cb85ed6e7f7d5480e6094c377d3dbcd18a57b58cfba43a7e42ea59fc8d3 rtl8189fs-c93cfd712a3acd2ecdeda19a66d269c20f8803f1.tar.gz diff --git a/package/rtl8189fs/rtl8189fs.mk b/package/rtl8189fs/rtl8189fs.mk index 1c398919ba..8b7618fcc8 100644 --- a/package/rtl8189fs/rtl8189fs.mk +++ b/package/rtl8189fs/rtl8189fs.mk @@ -4,15 +4,20 @@ # ################################################################################ -RTL8189FS_VERSION = 94a61cbf46ce87b7c9b8aa53123aeb142133a3c9 +RTL8189FS_VERSION = c93cfd712a3acd2ecdeda19a66d269c20f8803f1 RTL8189FS_SITE = $(call github,jwrdegoede,rtl8189ES_linux,$(RTL8189FS_VERSION)) RTL8189FS_LICENSE = GPL-2.0 +# Undefine the hardcoded CONFIG_LITTLE_ENDIAN +RTL8189FS_USER_EXTRA_CLAGS = -UCONFIG_LITTLE_ENDIAN +# Set endianness +RTL8189FS_USER_EXTRA_CLAGS += -DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN + RTL8189FS_MODULE_MAKE_OPTS = \ CONFIG_RTL8189FS=m \ KVER=$(LINUX_VERSION_PROBED) \ KSRC=$(LINUX_DIR) \ - USER_EXTRA_CFLAGS="-DCONFIG_$(call qstrip,$(BR2_ENDIAN))_ENDIAN" + USER_EXTRA_CFLAGS="$(RTL8189FS_USER_EXTRA_CLAGS)" define RTL8189FS_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) From thomas.petazzoni at bootlin.com Sun Oct 30 14:09:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 15:09:21 +0100 Subject: [Buildroot] [PATCH] package/rtl8189fs: bump to latest version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> References: <20221017203828.1327130-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030150921.3058ea4f@windsurf> On Mon, 17 Oct 2022 22:38:28 +0200 Giulio Benetti wrote: > Let's also drop local patch in favor of the upstream pending patch we > already use for package rtl8189es to deal with endianness. > > Fixes: > http://autobuild.buildroot.net/results/841cf9da4b07ae4bdc14d049f2585b09a95a92f5/ > > Signed-off-by: Giulio Benetti > --- > ...TRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch | 40 +++++++++++++++++++ > ...1-Makefile-remove-default-endianness.patch | 30 -------------- > package/rtl8189fs/rtl8189fs.hash | 2 +- > package/rtl8189fs/rtl8189fs.mk | 9 ++++- > 4 files changed, 48 insertions(+), 33 deletions(-) > create mode 100644 package/rtl8189fs/0001-Makefile-move-EXTRA_CFLAGS-USER_EXTRA_CFLAGS-at-the-.patch > delete mode 100644 package/rtl8189fs/0001-Makefile-remove-default-endianness.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From paguilar at paguilar.org Sun Oct 30 15:50:32 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sun, 30 Oct 2022 16:50:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030155032.197144-1-paguilar@paguilar.org> Signed-off-by: Pedro Aguilar --- package/bdwgc/bdwgc.hash | 2 +- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..ca094549c9 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES -- 2.34.1 From peter at korsgaard.com Sun Oct 30 15:56:31 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/mongoose: bump to version 7.8 In-Reply-To: <20221030131718.422677-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:17:18 +0100") References: <20221030131718.422677-1-fontaine.fabrice@gmail.com> Message-ID: <8735b5wbio.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Update hash of license file (date and URL updated with > https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 > https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) > https://github.com/cesanta/mongoose/releases/tag/7.8 > https://github.com/cesanta/mongoose/releases/tag/7.7 > https://github.com/cesanta/mongoose/releases/tag/7.6 > https://github.com/cesanta/mongoose/releases/tag/7.5 > https://github.com/cesanta/mongoose/releases/tag/7.4 > https://github.com/cesanta/mongoose/releases/tag/7.3 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/matio: bump to version 1.5.23 In-Reply-To: <20221030130723.408004-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:07:23 +0100") References: <20221030130723.408004-1-fontaine.fabrice@gmail.com> Message-ID: <87y1sxuwxs.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/tbeu/matio/releases/tag/v1.5.23 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:53 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/mcelog: bump to version 189 In-Reply-To: <20221030131048.410237-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:10:48 +0100") References: <20221030131048.410237-1-fontaine.fabrice@gmail.com> Message-ID: <87tu3luwxm.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > https://github.com/andikleen/mcelog/releases/tag/v189 > https://github.com/andikleen/mcelog/releases/tag/v188 > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:57:19 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:57:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/mbuffer: bump to version 20220418 In-Reply-To: <20221030130144.399291-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 30 Oct 2022 14:01:44 +0100") References: <20221030130144.399291-1-fontaine.fabrice@gmail.com> Message-ID: <87pme9uwww.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > Signed-off-by: Fabrice Fontaine Committed, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Sun Oct 30 15:56:00 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:00 +0100 Subject: [Buildroot] [git commit] package/mcelog: bump to version 189 Message-ID: <20221030155749.1623987538@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8d0c70370c48c3cc12baee1e572948c73e13cb4c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/andikleen/mcelog/releases/tag/v189 https://github.com/andikleen/mcelog/releases/tag/v188 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mcelog/mcelog.hash | 2 +- package/mcelog/mcelog.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mcelog/mcelog.hash b/package/mcelog/mcelog.hash index c64e652453..e0350b085d 100644 --- a/package/mcelog/mcelog.hash +++ b/package/mcelog/mcelog.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 02eb3f4cb0976048f191d124fb45a1720caf082cd246d858acb0a39a9d026641 mcelog-187.tar.gz +sha256 30364d134ff416f3f9469720add84bdccea226268d334f06022110f484550cd9 mcelog-189.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/mcelog/mcelog.mk b/package/mcelog/mcelog.mk index de1b76cfd3..8b5876d32e 100644 --- a/package/mcelog/mcelog.mk +++ b/package/mcelog/mcelog.mk @@ -4,7 +4,7 @@ # ################################################################################ -MCELOG_VERSION = 187 +MCELOG_VERSION = 189 MCELOG_SITE = $(call github,andikleen,mcelog,v$(MCELOG_VERSION)) MCELOG_LICENSE = GPL-2.0 MCELOG_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 30 15:56:07 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:07 +0100 Subject: [Buildroot] [git commit] package/mongoose: bump to version 7.8 Message-ID: <20221030155749.1F90487539@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f9e51e1150f59962577358b3da5c390ca4749291 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of license file (date and URL updated with https://github.com/cesanta/mongoose/commit/aaf55b6da0d4687cf6aae40011d38d0485bf8b34 https://github.com/cesanta/mongoose/commit/f8c84ca6722dbc47027af309ba64eaac34c7cfe9) https://github.com/cesanta/mongoose/releases/tag/7.8 https://github.com/cesanta/mongoose/releases/tag/7.7 https://github.com/cesanta/mongoose/releases/tag/7.6 https://github.com/cesanta/mongoose/releases/tag/7.5 https://github.com/cesanta/mongoose/releases/tag/7.4 https://github.com/cesanta/mongoose/releases/tag/7.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mongoose/mongoose.hash | 4 ++-- package/mongoose/mongoose.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mongoose/mongoose.hash b/package/mongoose/mongoose.hash index 809f160cf0..ffef9f446c 100644 --- a/package/mongoose/mongoose.hash +++ b/package/mongoose/mongoose.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 8c5024a4e5b5a0c7fdae3c24ebc68e2b3ccfaba08cf25c2e76fc7f14f92fd4a5 mongoose-7.2.tar.gz -sha256 9553d057f2ba980642f2c18d87ed38896cff1c9612d77d684a73a11fe1443b05 LICENSE +sha256 55073dcd427ab9475731ad855e417884f4fbfb24b7d5694f6cabadbee1329f16 mongoose-7.8.tar.gz +sha256 b41c293820074278291813af9f181918154875c94d744a90bf4eec331be28ac5 LICENSE diff --git a/package/mongoose/mongoose.mk b/package/mongoose/mongoose.mk index 2c5df1d0cc..8d06ed4689 100644 --- a/package/mongoose/mongoose.mk +++ b/package/mongoose/mongoose.mk @@ -4,7 +4,7 @@ # ################################################################################ -MONGOOSE_VERSION = 7.2 +MONGOOSE_VERSION = 7.8 MONGOOSE_SITE = $(call github,cesanta,mongoose,$(MONGOOSE_VERSION)) MONGOOSE_LICENSE = GPL-2.0 MONGOOSE_LICENSE_FILES = LICENSE From peter at korsgaard.com Sun Oct 30 15:57:10 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:57:10 +0100 Subject: [Buildroot] [git commit] package/mbuffer: bump to version 20220418 Message-ID: <20221030155749.35F8D8753B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a6e7d5c2ca091372a759bad60e6a7d8064d05234 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/mbuffer/mbuffer.hash | 4 ++-- package/mbuffer/mbuffer.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mbuffer/mbuffer.hash b/package/mbuffer/mbuffer.hash index bab568d1d8..8f7b8dd07b 100644 --- a/package/mbuffer/mbuffer.hash +++ b/package/mbuffer/mbuffer.hash @@ -1,8 +1,8 @@ # From http://www.maier-komor.de/mbuffer.html -md5 b6787260112e3ac416c0febdb097caa8 mbuffer-20211018.tgz +md5 90e183efeec2812e2413e97b65600acc mbuffer-20220418.tgz # Locally computed after checking signature upstream -sha256 e240c1e4e4ac14c28be8c660ec47d44ce16b1e8ec92aa907ad13004ffd5db6e3 mbuffer-20211018.tgz +sha256 6e5801f9f5ff11445d1d03028b5a03cd08af5408697b7f94c427833228a300c7 mbuffer-20220418.tgz # Hash for license file sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/mbuffer/mbuffer.mk b/package/mbuffer/mbuffer.mk index bbf27579f1..6381d97e8a 100644 --- a/package/mbuffer/mbuffer.mk +++ b/package/mbuffer/mbuffer.mk @@ -4,7 +4,7 @@ # ################################################################################ -MBUFFER_VERSION = 20211018 +MBUFFER_VERSION = 20220418 MBUFFER_SOURCE = mbuffer-$(MBUFFER_VERSION).tgz MBUFFER_SITE = http://www.maier-komor.de/software/mbuffer MBUFFER_LICENSE = GPL-3.0+ From peter at korsgaard.com Sun Oct 30 15:56:26 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Sun, 30 Oct 2022 16:56:26 +0100 Subject: [Buildroot] [git commit] package/matio: bump to version 1.5.23 Message-ID: <20221030155749.2ADB68753A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bed463a46f2b1949f66947b5cf1caa04ce9b6f0f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/tbeu/matio/releases/tag/v1.5.23 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard --- package/matio/matio.hash | 4 ++-- package/matio/matio.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/matio/matio.hash b/package/matio/matio.hash index 4634074ca0..94e0e48f69 100644 --- a/package/matio/matio.hash +++ b/package/matio/matio.hash @@ -1,4 +1,4 @@ -# From https://sourceforge.net/projects/matio/files/matio/1.5.22/ -sha512 33fd3991413e94dfc9aba13ffd08b09ddcbdb9dfa579124d981449e195a8c61a3dc95b55e46bba360d48456c117cf36403af1c3448689c26b8aea5fa9cf38323 matio-1.5.22.tar.gz +# From https://sourceforge.net/projects/matio/files/matio/1.5.23/ +sha512 e125278dcb25695affb7c576d0e2a86c0eff4225aa866b81536c9e4d7b2aea2c554f5389e96d534a8b559f5554b6cbecff4b44fe8915173cd64b2da6d1dc2629 matio-1.5.23.tar.gz # Locally computed sha256 3ed9a50d754fcc92d4accb8448e397eafeab686796b2a7445557ce782806e239 COPYING diff --git a/package/matio/matio.mk b/package/matio/matio.mk index d282852d37..5e09f4e6ce 100644 --- a/package/matio/matio.mk +++ b/package/matio/matio.mk @@ -4,7 +4,7 @@ # ################################################################################ -MATIO_VERSION = 1.5.22 +MATIO_VERSION = 1.5.23 MATIO_SITE = http://downloads.sourceforge.net/project/matio/matio/$(MATIO_VERSION) MATIO_LICENSE = BSD-2-Clause MATIO_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sun Oct 30 16:02:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:02:57 +0100 Subject: [Buildroot] [git commit] package/brltty: fix infinite loop in configure Message-ID: <20221030160315.7624A8753E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=241db490b703fc734f0e8719a07d0f9ff40faaba branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport a patch to fix an infinite loop bug in configure. Fixes: - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- ...gue-runProgramTerminationCommands-used-a-.patch | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch new file mode 100644 index 0000000000..0f81254e08 --- /dev/null +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch @@ -0,0 +1,29 @@ +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 +From: Dave Mielke +Date: Sat, 15 Oct 2022 15:20:38 -0400 +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash + command. (dm) + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] +--- + brltty-prologue.sh | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/brltty-prologue.sh b/brltty-prologue.sh +index 05b817742..6d1faf983 100644 +--- a/brltty-prologue.sh ++++ b/brltty-prologue.sh +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { + while [ "${programTerminationCommandCount}" -gt 0 ] + do + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") +- let "programTerminationCommandCount -= 1" ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) + + local process="${1}" + local directory="${2}" +-- +2.34.1 + From yann.morin.1998 at free.fr Sun Oct 30 16:03:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:03:39 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/brltty: fix infinite loop in configure In-Reply-To: <20221015210940.4002212-1-james.hilliard1@gmail.com> References: <20221015210940.4002212-1-james.hilliard1@gmail.com> Message-ID: <20221030160339.GG1058960@scaer> James, All, On 2022-10-15 15:09 -0600, James Hilliard spake thusly: > Backport a patch to fix an infinite loop bug in configure. > > Fixes: > - http://autobuild.buildroot.net/results/82a/82af705f7ca282495461cb3994f5a7e6f64273e1 > - http://autobuild.buildroot.net/results/06c/06c9414a1ecbc1a147bc8dfddced03fc659af694 > - http://autobuild.buildroot.net/results/59e/59e36093f7e437a5a37037f7fa50ce2443c47fd3 > > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > Changes v1 -> v2: > - backport patch instead of revert > --- > ...unProgramTerminationCommands-used-a-.patch | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > > diff --git a/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > new file mode 100644 > index 0000000000..0f81254e08 > --- /dev/null > +++ b/package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch > @@ -0,0 +1,29 @@ > +From 4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f Mon Sep 17 00:00:00 2001 > +From: Dave Mielke > +Date: Sat, 15 Oct 2022 15:20:38 -0400 > +Subject: [PATCH] shell prologue: runProgramTerminationCommands used a bash > + command. (dm) > + > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +4503c2cbd3981ba1b50ec7ce287ab48c772b3a7f] > +--- > + brltty-prologue.sh | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/brltty-prologue.sh b/brltty-prologue.sh > +index 05b817742..6d1faf983 100644 > +--- a/brltty-prologue.sh > ++++ b/brltty-prologue.sh > +@@ -102,7 +102,7 @@ runProgramTerminationCommands() { > + while [ "${programTerminationCommandCount}" -gt 0 ] > + do > + set -- $(getVariable "programTerminationCommand${programTerminationCommandCount}") > +- let "programTerminationCommandCount -= 1" > ++ programTerminationCommandCount=$((programTerminationCommandCount - 1)) > + > + local process="${1}" > + local directory="${2}" > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:10:04 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:04 +0100 Subject: [Buildroot] [git commit] package/libdrm: bump version to 2.4.113 Message-ID: <20221030161421.5DB3887571@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce8eb37a7ea0a13644fe9ec29bf8ce72df094386 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch various configure options from true/false to enabled/disabled due to upstream commits: https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/libdrm/libdrm.hash | 6 +++--- package/libdrm/libdrm.mk | 54 +++++++++++++++++++++++----------------------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash index 082a158074..a47e169bed 100644 --- a/package/libdrm/libdrm.hash +++ b/package/libdrm/libdrm.hash @@ -1,6 +1,6 @@ -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz # Hash for license file sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk index 79d9416ef0..34bd678c5a 100644 --- a/package/libdrm/libdrm.mk +++ b/package/libdrm/libdrm.mk @@ -4,7 +4,7 @@ # ################################################################################ -LIBDRM_VERSION = 2.4.112 +LIBDRM_VERSION = 2.4.113 LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz LIBDRM_SITE = https://dri.freedesktop.org/libdrm LIBDRM_LICENSE = MIT @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ host-pkgconf LIBDRM_CONF_OPTS = \ - -Dcairo-tests=false \ - -Dman-pages=false + -Dcairo-tests=disabled \ + -Dman-pages=disabled ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) LIBDRM_DEPENDENCIES += libatomic_ops @@ -27,70 +27,70 @@ endif endif ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) -LIBDRM_CONF_OPTS += -Dintel=true +LIBDRM_CONF_OPTS += -Dintel=enabled LIBDRM_DEPENDENCIES += libpciaccess else -LIBDRM_CONF_OPTS += -Dintel=false +LIBDRM_CONF_OPTS += -Dintel=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) -LIBDRM_CONF_OPTS += -Dradeon=true +LIBDRM_CONF_OPTS += -Dradeon=enabled else -LIBDRM_CONF_OPTS += -Dradeon=false +LIBDRM_CONF_OPTS += -Dradeon=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) -LIBDRM_CONF_OPTS += -Damdgpu=true +LIBDRM_CONF_OPTS += -Damdgpu=enabled else -LIBDRM_CONF_OPTS += -Damdgpu=false +LIBDRM_CONF_OPTS += -Damdgpu=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) -LIBDRM_CONF_OPTS += -Dnouveau=true +LIBDRM_CONF_OPTS += -Dnouveau=enabled else -LIBDRM_CONF_OPTS += -Dnouveau=false +LIBDRM_CONF_OPTS += -Dnouveau=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) -LIBDRM_CONF_OPTS += -Dvmwgfx=true +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled else -LIBDRM_CONF_OPTS += -Dvmwgfx=false +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) -LIBDRM_CONF_OPTS += -Domap=true +LIBDRM_CONF_OPTS += -Domap=enabled else -LIBDRM_CONF_OPTS += -Domap=false +LIBDRM_CONF_OPTS += -Domap=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) -LIBDRM_CONF_OPTS += -Detnaviv=true +LIBDRM_CONF_OPTS += -Detnaviv=enabled else -LIBDRM_CONF_OPTS += -Detnaviv=false +LIBDRM_CONF_OPTS += -Detnaviv=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) -LIBDRM_CONF_OPTS += -Dexynos=true +LIBDRM_CONF_OPTS += -Dexynos=enabled else -LIBDRM_CONF_OPTS += -Dexynos=false +LIBDRM_CONF_OPTS += -Dexynos=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) -LIBDRM_CONF_OPTS += -Dfreedreno=true +LIBDRM_CONF_OPTS += -Dfreedreno=enabled else -LIBDRM_CONF_OPTS += -Dfreedreno=false +LIBDRM_CONF_OPTS += -Dfreedreno=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) -LIBDRM_CONF_OPTS += -Dtegra=true +LIBDRM_CONF_OPTS += -Dtegra=enabled else -LIBDRM_CONF_OPTS += -Dtegra=false +LIBDRM_CONF_OPTS += -Dtegra=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) -LIBDRM_CONF_OPTS += -Dvc4=true +LIBDRM_CONF_OPTS += -Dvc4=enabled else -LIBDRM_CONF_OPTS += -Dvc4=false +LIBDRM_CONF_OPTS += -Dvc4=disabled endif ifeq ($(BR2_PACKAGE_HAS_UDEV),y) @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false endif ifeq ($(BR2_PACKAGE_VALGRIND),y) -LIBDRM_CONF_OPTS += -Dvalgrind=true +LIBDRM_CONF_OPTS += -Dvalgrind=enabled LIBDRM_DEPENDENCIES += valgrind else -LIBDRM_CONF_OPTS += -Dvalgrind=false +LIBDRM_CONF_OPTS += -Dvalgrind=disabled endif ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) From yann.morin.1998 at free.fr Sun Oct 30 16:10:56 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:56 +0100 Subject: [Buildroot] [git commit] package/smartmontools: bump to version 7.3 Message-ID: <20221030161421.7F76687575@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e60fb6d252d5ece448a70957ab45389b151f7f79 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/smartmontools/smartmontools.hash | 8 ++++---- package/smartmontools/smartmontools.mk | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash index 3c5535b29a..e48e955d01 100644 --- a/package/smartmontools/smartmontools.hash +++ b/package/smartmontools/smartmontools.hash @@ -1,7 +1,7 @@ -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz # Locally computed -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk index 2e2bbcd4e2..d24f008df4 100644 --- a/package/smartmontools/smartmontools.mk +++ b/package/smartmontools/smartmontools.mk @@ -4,7 +4,7 @@ # ################################################################################ -SMARTMONTOOLS_VERSION = 7.2 +SMARTMONTOOLS_VERSION = 7.3 SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) SMARTMONTOOLS_LICENSE = GPL-2.0+ SMARTMONTOOLS_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Sun Oct 30 16:11:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:11:00 +0100 Subject: [Buildroot] [git commit] package/qlibc: bump to version 2.4.7 Message-ID: <20221030161421.9597F87572@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=277e1250a6a000911ab463296dbb29e2e53514c4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/qlibc/qlibc.hash | 2 +- package/qlibc/qlibc.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash index 5cd6e1860f..9b2af1a4e3 100644 --- a/package/qlibc/qlibc.hash +++ b/package/qlibc/qlibc.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk index 3996bb3706..838ba68746 100644 --- a/package/qlibc/qlibc.mk +++ b/package/qlibc/qlibc.mk @@ -4,7 +4,7 @@ # ################################################################################ -QLIBC_VERSION = 2.4.6 +QLIBC_VERSION = 2.4.7 QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) QLIBC_LICENSE = BSD-2-Clause QLIBC_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Sun Oct 30 16:10:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:43 +0100 Subject: [Buildroot] [git commit] package/sngrep: bump to version 1.6.0 Message-ID: <20221030161421.75FDB87573@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69c9cc60a10a114b49830134ac2ad5f136bd057f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - pcre2 is an optional dependency since https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc - zlib is an optional dependency since https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...e_openssl.h-fix-build-with-libressl-3.5.0.patch | 40 ---------------------- package/sngrep/sngrep.hash | 6 ++-- package/sngrep/sngrep.mk | 21 +++++++++--- 3 files changed, 19 insertions(+), 48 deletions(-) diff --git a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch b/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch deleted file mode 100644 index 7dbb29ab00..0000000000 --- a/package/sngrep/0001-src-capture_openssl.h-fix-build-with-libressl-3.5.0.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Fri, 29 Apr 2022 18:53:45 +0200 -Subject: [PATCH] src/capture_openssl.h: fix build with libressl >= 3.5.0 - -Fix the following build failure with libressl >= 3.5.0: - -capture_openssl.c: In function 'P_hash': -capture_openssl.c:101:18: error: storage size of 'hm' isn't known - 101 | HMAC_CTX hm; - | ^~ - -Fixes: - - http://autobuild.buildroot.org/results/f1e8cdb3ac35a30055ab79d41e6cc038e5339c37 - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/irontec/sngrep/commit/4e1406ad0df370ff8bf1d3a81aaadbb1cad2d761] ---- - src/capture_openssl.h | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/src/capture_openssl.h b/src/capture_openssl.h -index 780de494..1f87a5cd 100644 ---- a/src/capture_openssl.h -+++ b/src/capture_openssl.h -@@ -67,10 +67,11 @@ - #endif - - /* LibreSSL declares OPENSSL_VERSION_NUMBER == 2.0 but does not include most -- * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) -+ * changes from OpenSSL >= 1.1 (new functions, macros, deprecations, ...) until -+ * version 3.5.0 - */ - #if defined(LIBRESSL_VERSION_NUMBER) --#define MODSSL_USE_OPENSSL_PRE_1_1_API (1) -+#define MODSSL_USE_OPENSSL_PRE_1_1_API (LIBRESSL_VERSION_NUMBER < 0x30500000L) - #else - #define MODSSL_USE_OPENSSL_PRE_1_1_API (OPENSSL_VERSION_NUMBER < 0x10100000L) - #endif diff --git a/package/sngrep/sngrep.hash b/package/sngrep/sngrep.hash index 33fa91ef5e..60a32022e6 100644 --- a/package/sngrep/sngrep.hash +++ b/package/sngrep/sngrep.hash @@ -1,6 +1,6 @@ -# From https://github.com/irontec/sngrep/releases/download/v1.4.7/sngrep-1.4.7.tar.gz.md5sum -md5 78fe753e24f36ddaf627bc2b734f45ba sngrep-1.4.7.tar.gz +# From https://github.com/irontec/sngrep/releases/download/v1.6.0/sngrep-1.6.0.tar.gz.md5sum +md5 1519ca6cd1167c0722debfb96e2ac173 sngrep-1.6.0.tar.gz # Locally computed -sha256 3c96aadd8b8c6b7adb5552d6fb4234f2000f15109b0f6c5feb632c81306cc49b sngrep-1.4.7.tar.gz +sha256 fd80964d6560f2ff57b4f5bef2353d1a6f7c48d2f1a5f0a167c854bd2e801999 sngrep-1.6.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk index 841a7bb991..eedb99492f 100644 --- a/package/sngrep/sngrep.mk +++ b/package/sngrep/sngrep.mk @@ -4,8 +4,9 @@ # ################################################################################ -SNGREP_VERSION = 1.4.7 -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) +SNGREP_VERSION = 1.6.0 +SNGREP_SITE = \ + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) SNGREP_LICENSE = GPL-3.0+ SNGREP_LICENSE_FILES = LICENSE SNGREP_AUTORECONF = YES @@ -29,11 +30,21 @@ else SNGREP_CONF_OPTS += --without-gnutls --without-openssl endif -ifeq ($(BR2_PACKAGE_PCRE),y) +ifeq ($(BR2_PACKAGE_PCRE2),y) +SNGREP_DEPENDENCIES += pcre2 +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 +else ifeq ($(BR2_PACKAGE_PCRE),y) SNGREP_DEPENDENCIES += pcre -SNGREP_CONF_OPTS += --with-pcre +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 else -SNGREP_CONF_OPTS += --without-pcre +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 +endif + +ifeq ($(BR2_PACKAGE_ZLIB),y) +SNGREP_DEPENDENCIES += zlib +SNGREP_CONF_OPTS += --with-zlib +else +SNGREP_CONF_OPTS += --without-zlib endif $(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 16:10:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:06 +0100 Subject: [Buildroot] [git commit] package/slang: bump to version 2.3.3 Message-ID: <20221030161421.689C587572@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e0f40892e921dc06e89ff543df754e434b608633 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Refresh patch http://lists.jedsoft.org/lists/slang-users/2022/0000005.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/slang/0001-slsh-libs.patch | 6 ++++-- package/slang/slang.hash | 4 ++-- package/slang/slang.mk | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch index 211cb4a0e0..fad16d1b2f 100644 --- a/package/slang/0001-slsh-libs.patch +++ b/package/slang/0001-slsh-libs.patch @@ -5,6 +5,8 @@ probably Diego Petten??. Signed-off-by: Gustavo Zacarias [Bernd: rebased against 2.3.1a] Signed-off-by: Bernd Kuhls +[Fabrice: rebased against 2.3.3] +Signed-off-by: Fabrice Fontaine --- a/slsh/Makefile.in +++ b/slsh/Makefile.in @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile diff --git a/package/slang/slang.hash b/package/slang/slang.hash index 3e211ab548..563117b48a 100644 --- a/package/slang/slang.hash +++ b/package/slang/slang.hash @@ -1,6 +1,6 @@ # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 # License file, locally computed sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING diff --git a/package/slang/slang.mk b/package/slang/slang.mk index 44a0148088..e0f5968b46 100644 --- a/package/slang/slang.mk +++ b/package/slang/slang.mk @@ -4,7 +4,7 @@ # ################################################################################ -SLANG_VERSION = 2.3.2 +SLANG_VERSION = 2.3.3 SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 SLANG_SITE = http://www.jedsoft.org/releases/slang SLANG_LICENSE = GPL-2.0+ From yann.morin.1998 at free.fr Sun Oct 30 16:10:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:10:58 +0100 Subject: [Buildroot] [git commit] package/taglib: bump to version 1.13 Message-ID: <20221030161421.8A85D87571@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5ef22cb6d10958a9867fc372725826819a8824ef branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patch (already in version) - Use WITH_ZLIB which is available since https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e https://github.com/taglib/taglib/releases/tag/v1.13 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...latile-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ---------------------- package/taglib/taglib.hash | 2 +- package/taglib/taglib.mk | 5 +++- 3 files changed, 5 insertions(+), 36 deletions(-) diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch deleted file mode 100644 index d8af73cb08..0000000000 --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 -From: Oleg Antonyan -Date: Thu, 13 May 2021 16:41:35 +0200 -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= - =?UTF-8?q?=201.12=20(#1012)?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -* fix error: duplicate volatile - -* fix volatile ATOMIC_INT in constructor - -[Retrieved from: -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] -Signed-off-by: Fabrice Fontaine ---- - taglib/toolkit/trefcounter.cpp | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp -index 18cb596c0..5b089abf9 100644 ---- a/taglib/toolkit/trefcounter.cpp -+++ b/taglib/toolkit/trefcounter.cpp -@@ -52,7 +52,7 @@ - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) - #else --# define ATOMIC_INT volatile int -+# define ATOMIC_INT int - # define ATOMIC_INC(x) (++x) - # define ATOMIC_DEC(x) (--x) - #endif diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash index 38a44b41a5..7d1b2e8422 100644 --- a/package/taglib/taglib.hash +++ b/package/taglib/taglib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk index 9513e0d0e1..c687891002 100644 --- a/package/taglib/taglib.mk +++ b/package/taglib/taglib.mk @@ -4,7 +4,7 @@ # ################################################################################ -TAGLIB_VERSION = 1.12 +TAGLIB_VERSION = 1.13 TAGLIB_SITE = http://taglib.github.io/releases TAGLIB_INSTALL_STAGING = YES TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib ifeq ($(BR2_PACKAGE_ZLIB),y) TAGLIB_DEPENDENCIES += zlib +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON +else +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF endif define TAGLIB_REMOVE_DEVFILE From yann.morin.1998 at free.fr Sun Oct 30 16:14:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:14:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/libdrm: bump version to 2.4.113 In-Reply-To: <20221028203342.210288-1-bernd.kuhls@t-online.de> References: <20221028203342.210288-1-bernd.kuhls@t-online.de> Message-ID: <20221030161442.GH1058960@scaer> Bernd, All, On 2022-10-28 22:33 +0200, Bernd Kuhls spake thusly: > Switch various configure options from true/false to enabled/disabled > due to upstream commits: > https://cgit.freedesktop.org/mesa/drm/commit/?id=26eb15165b767de50bef3c02abd29cec256cf4a1 > https://cgit.freedesktop.org/mesa/drm/commit/?id=a64a176cfd62956cc4967aa2929db2526d4faee2 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libdrm/libdrm.hash | 6 ++--- > package/libdrm/libdrm.mk | 54 +++++++++++++++++++------------------- > 2 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/package/libdrm/libdrm.hash b/package/libdrm/libdrm.hash > index 082a158074..a47e169bed 100644 > --- a/package/libdrm/libdrm.hash > +++ b/package/libdrm/libdrm.hash > @@ -1,6 +1,6 @@ > -# From https://lists.freedesktop.org/archives/dri-devel/2022-July/362994.html > -sha256 00b07710bd09b35cd8d80eaf4f4497fe27f4becf467a9830f1f5e8324f8420ff libdrm-2.4.112.tar.xz > -sha512 df8a207d9cce220ee2cf67877eda65394733fbfd0ff85fdbadb2b20ba9bacc41421b32452506c8caecddaf8361564ca68cd6c74d4faf3b1569ab30a3243e4340 libdrm-2.4.112.tar.xz > +# From https://lists.freedesktop.org/archives/dri-devel/2022-August/369983.html > +sha256 7fd7eb2967f63beb4606f22d50e277d993480d05ef75dd88a9bd8e677323e5e1 libdrm-2.4.113.tar.xz > +sha512 fca9834ce090f63ce6dc6d04491a2c5e86162fdddfc8ea70d55a6cdeb401be656388aae1577e58f463a78d8dc502be0a641908784819874e20bbec9a39a057e0 libdrm-2.4.113.tar.xz > > # Hash for license file > sha256 d0a616a9020dc0271e36e6dd4bad174b4e2c2a42636f13785f8e18dd5f85fd83 data/meson.build > diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk > index 79d9416ef0..34bd678c5a 100644 > --- a/package/libdrm/libdrm.mk > +++ b/package/libdrm/libdrm.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LIBDRM_VERSION = 2.4.112 > +LIBDRM_VERSION = 2.4.113 > LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.xz > LIBDRM_SITE = https://dri.freedesktop.org/libdrm > LIBDRM_LICENSE = MIT > @@ -16,8 +16,8 @@ LIBDRM_DEPENDENCIES = \ > host-pkgconf > > LIBDRM_CONF_OPTS = \ > - -Dcairo-tests=false \ > - -Dman-pages=false > + -Dcairo-tests=disabled \ > + -Dman-pages=disabled > > ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y) > LIBDRM_DEPENDENCIES += libatomic_ops > @@ -27,70 +27,70 @@ endif > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_INTEL),y) > -LIBDRM_CONF_OPTS += -Dintel=true > +LIBDRM_CONF_OPTS += -Dintel=enabled > LIBDRM_DEPENDENCIES += libpciaccess > else > -LIBDRM_CONF_OPTS += -Dintel=false > +LIBDRM_CONF_OPTS += -Dintel=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_RADEON),y) > -LIBDRM_CONF_OPTS += -Dradeon=true > +LIBDRM_CONF_OPTS += -Dradeon=enabled > else > -LIBDRM_CONF_OPTS += -Dradeon=false > +LIBDRM_CONF_OPTS += -Dradeon=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_AMDGPU),y) > -LIBDRM_CONF_OPTS += -Damdgpu=true > +LIBDRM_CONF_OPTS += -Damdgpu=enabled > else > -LIBDRM_CONF_OPTS += -Damdgpu=false > +LIBDRM_CONF_OPTS += -Damdgpu=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_NOUVEAU),y) > -LIBDRM_CONF_OPTS += -Dnouveau=true > +LIBDRM_CONF_OPTS += -Dnouveau=enabled > else > -LIBDRM_CONF_OPTS += -Dnouveau=false > +LIBDRM_CONF_OPTS += -Dnouveau=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_VMWGFX),y) > -LIBDRM_CONF_OPTS += -Dvmwgfx=true > +LIBDRM_CONF_OPTS += -Dvmwgfx=enabled > else > -LIBDRM_CONF_OPTS += -Dvmwgfx=false > +LIBDRM_CONF_OPTS += -Dvmwgfx=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_OMAP),y) > -LIBDRM_CONF_OPTS += -Domap=true > +LIBDRM_CONF_OPTS += -Domap=enabled > else > -LIBDRM_CONF_OPTS += -Domap=false > +LIBDRM_CONF_OPTS += -Domap=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_ETNAVIV),y) > -LIBDRM_CONF_OPTS += -Detnaviv=true > +LIBDRM_CONF_OPTS += -Detnaviv=enabled > else > -LIBDRM_CONF_OPTS += -Detnaviv=false > +LIBDRM_CONF_OPTS += -Detnaviv=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_EXYNOS),y) > -LIBDRM_CONF_OPTS += -Dexynos=true > +LIBDRM_CONF_OPTS += -Dexynos=enabled > else > -LIBDRM_CONF_OPTS += -Dexynos=false > +LIBDRM_CONF_OPTS += -Dexynos=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_FREEDRENO),y) > -LIBDRM_CONF_OPTS += -Dfreedreno=true > +LIBDRM_CONF_OPTS += -Dfreedreno=enabled > else > -LIBDRM_CONF_OPTS += -Dfreedreno=false > +LIBDRM_CONF_OPTS += -Dfreedreno=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_TEGRA),y) > -LIBDRM_CONF_OPTS += -Dtegra=true > +LIBDRM_CONF_OPTS += -Dtegra=enabled > else > -LIBDRM_CONF_OPTS += -Dtegra=false > +LIBDRM_CONF_OPTS += -Dtegra=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_VC4),y) > -LIBDRM_CONF_OPTS += -Dvc4=true > +LIBDRM_CONF_OPTS += -Dvc4=enabled > else > -LIBDRM_CONF_OPTS += -Dvc4=false > +LIBDRM_CONF_OPTS += -Dvc4=disabled > endif > > ifeq ($(BR2_PACKAGE_HAS_UDEV),y) > @@ -101,10 +101,10 @@ LIBDRM_CONF_OPTS += -Dudev=false > endif > > ifeq ($(BR2_PACKAGE_VALGRIND),y) > -LIBDRM_CONF_OPTS += -Dvalgrind=true > +LIBDRM_CONF_OPTS += -Dvalgrind=enabled > LIBDRM_DEPENDENCIES += valgrind > else > -LIBDRM_CONF_OPTS += -Dvalgrind=false > +LIBDRM_CONF_OPTS += -Dvalgrind=disabled > endif > > ifeq ($(BR2_PACKAGE_LIBDRM_INSTALL_TESTS),y) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:15:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:15:38 +0100 Subject: [Buildroot] [PATCH 1/1] package/slang: bump to version 2.3.3 In-Reply-To: <20221028213127.243377-1-fontaine.fabrice@gmail.com> References: <20221028213127.243377-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161538.GI1058960@scaer> Fabrice, All, On 2022-10-28 23:31 +0200, Fabrice Fontaine spake thusly: > Refresh patch > > http://lists.jedsoft.org/lists/slang-users/2022/0000005.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/slang/0001-slsh-libs.patch | 6 ++++-- > package/slang/slang.hash | 4 ++-- > package/slang/slang.mk | 2 +- > 3 files changed, 7 insertions(+), 5 deletions(-) > > diff --git a/package/slang/0001-slsh-libs.patch b/package/slang/0001-slsh-libs.patch > index 211cb4a0e0..fad16d1b2f 100644 > --- a/package/slang/0001-slsh-libs.patch > +++ b/package/slang/0001-slsh-libs.patch > @@ -5,6 +5,8 @@ probably Diego Petten?. > Signed-off-by: Gustavo Zacarias > [Bernd: rebased against 2.3.1a] > Signed-off-by: Bernd Kuhls > +[Fabrice: rebased against 2.3.3] > +Signed-off-by: Fabrice Fontaine > > --- a/slsh/Makefile.in > +++ b/slsh/Makefile.in > @@ -12,8 +14,8 @@ Signed-off-by: Bernd Kuhls > $(OBJDIR)/slsh_exe: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o > $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh_exe $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > $(OBJDIR)/slsh: $(OBJDIR)/slsh.o $(OBJDIR)/readline.o > -- $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) > -+ $(CC) $(CFLAGS) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > +- $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(INST_LIBS) > ++ $(CC) $(OBJDIR)/slsh.o $(OBJDIR)/readline.o -o $(OBJDIR)/slsh $(LDFLAGS) $(DLINK_FLAGS) $(SRC_LIBS) > $(OBJDIR)/slsh.o: $(OBJDIR_TSTAMP) slsh.c slsh.h config.h Makefile > cd $(OBJDIR) && $(CC) $(SLANG_SRCINC) $(CFLAGS) -c $(DEFS) $(SRCDIR)/slsh.c > $(OBJDIR)/readline.o: $(OBJDIR_TSTAMP) readline.c slsh.h config.h Makefile > diff --git a/package/slang/slang.hash b/package/slang/slang.hash > index 3e211ab548..563117b48a 100644 > --- a/package/slang/slang.hash > +++ b/package/slang/slang.hash > @@ -1,6 +1,6 @@ > # sha1 from http://www.jedsoft.org/releases/slang/, sha256 locally computed > -sha1 bbf7f2dcc14e7c7fca40868fd4b411a2bd9e2655 slang-2.3.2.tar.bz2 > -sha256 fc9e3b0fc4f67c3c1f6d43c90c16a5c42d117b8e28457c5b46831b8b5d3ae31a slang-2.3.2.tar.bz2 > +sha1 38d9b8e80e4336f76dff3e1d85761d2d0f713595 slang-2.3.3.tar.bz2 > +sha256 f9145054ae131973c61208ea82486d5dd10e3c5cdad23b7c4a0617743c8f5a18 slang-2.3.3.tar.bz2 > > # License file, locally computed > sha256 ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b COPYING > diff --git a/package/slang/slang.mk b/package/slang/slang.mk > index 44a0148088..e0f5968b46 100644 > --- a/package/slang/slang.mk > +++ b/package/slang/slang.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SLANG_VERSION = 2.3.2 > +SLANG_VERSION = 2.3.3 > SLANG_SOURCE = slang-$(SLANG_VERSION).tar.bz2 > SLANG_SITE = http://www.jedsoft.org/releases/slang > SLANG_LICENSE = GPL-2.0+ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:16:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:16:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/sngrep: bump to version 1.6.0 In-Reply-To: <20221028214811.273143-1-fontaine.fabrice@gmail.com> References: <20221028214811.273143-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161642.GJ1058960@scaer> Fabrice, All, On 2022-10-28 23:48 +0200, Fabrice Fontaine spake thusly: > - Drop patch (already in version) > - pcre2 is an optional dependency since > https://github.com/irontec/sngrep/commit/cac42deab5e94661e2495399bc40eaf75e0b46bc > - zlib is an optional dependency since > https://github.com/irontec/sngrep/commit/c02f439d73f33c727909131cb4d9d01029d7492f > > https://github.com/irontec/sngrep/blob/v1.6.0/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- [--SNIP--] > diff --git a/package/sngrep/sngrep.mk b/package/sngrep/sngrep.mk > index 841a7bb991..7b614f1770 100644 > --- a/package/sngrep/sngrep.mk > +++ b/package/sngrep/sngrep.mk > @@ -4,8 +4,9 @@ > # > ################################################################################ > > -SNGREP_VERSION = 1.4.7 > -SNGREP_SITE = $(call github,irontec,sngrep,v$(SNGREP_VERSION)) > +SNGREP_VERSION = 1.6.0 > +SNGREP_SITE = \ > + https://github.com/irontec/sngrep/releases/download/v$(SNGREP_VERSION) > SNGREP_LICENSE = GPL-3.0+ > SNGREP_LICENSE_FILES = LICENSE > SNGREP_AUTORECONF = YES > @@ -29,11 +30,21 @@ else > SNGREP_CONF_OPTS += --without-gnutls --without-openssl > endif > > -ifeq ($(BR2_PACKAGE_PCRE),y) > +ifeq ($(BR2_PACKAGE_PCRE2),y) > +SNGREP_DEPENDENCIES += pcre2 > +SNGREP_CONF_OPTS += --without-pcre --with-pcre2 $ make check-package WARNING: package/sngrep/sngrep.mk:35: line contains trailing whitespace WARNING: package/sngrep/sngrep.mk:45: line contains trailing whitespace Applied to master with those fixed, thanks. Regards, Yann E. MORIN. > +else ifeq ($(BR2_PACKAGE_PCRE),y) > SNGREP_DEPENDENCIES += pcre > -SNGREP_CONF_OPTS += --with-pcre > +SNGREP_CONF_OPTS += --with-pcre --without-pcre2 > else > -SNGREP_CONF_OPTS += --without-pcre > +SNGREP_CONF_OPTS += --without-pcre --without-pcre2 > +endif > + > +ifeq ($(BR2_PACKAGE_ZLIB),y) > +SNGREP_DEPENDENCIES += zlib > +SNGREP_CONF_OPTS += --with-zlib > +else > +SNGREP_CONF_OPTS += --without-zlib > endif > > $(eval $(autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:00 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:00 +0100 Subject: [Buildroot] [PATCH 1/1] package/smartmontools: bump to version 7.3 In-Reply-To: <20221028215325.278206-1-fontaine.fabrice@gmail.com> References: <20221028215325.278206-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161700.GK1058960@scaer> Fabrice, All, On 2022-10-28 23:53 +0200, Fabrice Fontaine spake thusly: > https://github.com/smartmontools/smartmontools/releases/tag/RELEASE_7_3 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/smartmontools/smartmontools.hash | 8 ++++---- > package/smartmontools/smartmontools.mk | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/package/smartmontools/smartmontools.hash b/package/smartmontools/smartmontools.hash > index 3c5535b29a..e48e955d01 100644 > --- a/package/smartmontools/smartmontools.hash > +++ b/package/smartmontools/smartmontools.hash > @@ -1,7 +1,7 @@ > -# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.2/ > -md5 e8d134c69ae4959a05cb56b31172ffb1 smartmontools-7.2.tar.gz > -sha1 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 smartmontools-7.2.tar.gz > +# From http://sourceforge.net/projects/smartmontools/files/smartmontools/7.3/ > +md5 7a71d388124e3cd43abf6586a43cb1ff smartmontools-7.3.tar.gz > +sha1 5ce7adb606119148d725b91a00652d427ca0adc2 smartmontools-7.3.tar.gz > > # Locally computed > -sha256 5cd98a27e6393168bc6aaea070d9e1cd551b0f898c52f66b2ff2e5d274118cd6 smartmontools-7.2.tar.gz > +sha256 a544f8808d0c58cfb0e7424ca1841cb858a974922b035d505d4e4c248be3a22b smartmontools-7.3.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/smartmontools/smartmontools.mk b/package/smartmontools/smartmontools.mk > index 2e2bbcd4e2..d24f008df4 100644 > --- a/package/smartmontools/smartmontools.mk > +++ b/package/smartmontools/smartmontools.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -SMARTMONTOOLS_VERSION = 7.2 > +SMARTMONTOOLS_VERSION = 7.3 > SMARTMONTOOLS_SITE = http://downloads.sourceforge.net/project/smartmontools/smartmontools/$(SMARTMONTOOLS_VERSION) > SMARTMONTOOLS_LICENSE = GPL-2.0+ > SMARTMONTOOLS_LICENSE_FILES = COPYING > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:18 +0100 Subject: [Buildroot] [PATCH 1/1] package/taglib: bump to version 1.13 In-Reply-To: <20221028220223.286949-1-fontaine.fabrice@gmail.com> References: <20221028220223.286949-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161718.GL1058960@scaer> Fabrice, All, On 2022-10-29 00:02 +0200, Fabrice Fontaine spake thusly: > - Drop patch (already in version) > - Use WITH_ZLIB which is available since > https://github.com/taglib/taglib/commit/1644c0dd87f40a2492bde4011fe72257fc72ee0e > > https://github.com/taglib/taglib/releases/tag/v1.13 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...e-on-systems-without-HAVE_GCC_ATOMIC.patch | 34 ------------------- > package/taglib/taglib.hash | 2 +- > package/taglib/taglib.mk | 5 ++- > 3 files changed, 5 insertions(+), 36 deletions(-) > delete mode 100644 package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > > diff --git a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch b/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > deleted file mode 100644 > index d8af73cb08..0000000000 > --- a/package/taglib/0001-Fix-error-duplicate-volatile-on-systems-without-HAVE_GCC_ATOMIC.patch > +++ /dev/null > @@ -1,34 +0,0 @@ > -From 1d24bd3399f2284104cbe87d017f87325b1797ab Mon Sep 17 00:00:00 2001 > -From: Oleg Antonyan > -Date: Thu, 13 May 2021 16:41:35 +0200 > -Subject: [PATCH] =?UTF-8?q?Fix=20"error:=20duplicate=20=E2=80=98volatile?= > - =?UTF-8?q?=E2=80=99"=20on=20systems=20without=20HAVE=5FGCC=5FATOMIC=20in?= > - =?UTF-8?q?=201.12=20(#1012)?= > -MIME-Version: 1.0 > -Content-Type: text/plain; charset=UTF-8 > -Content-Transfer-Encoding: 8bit > - > -* fix error: duplicate volatile > - > -* fix volatile ATOMIC_INT in constructor > - > -[Retrieved from: > -https://github.com/taglib/taglib/commit/1d24bd3399f2284104cbe87d017f87325b1797ab] > -Signed-off-by: Fabrice Fontaine > ---- > - taglib/toolkit/trefcounter.cpp | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/taglib/toolkit/trefcounter.cpp b/taglib/toolkit/trefcounter.cpp > -index 18cb596c0..5b089abf9 100644 > ---- a/taglib/toolkit/trefcounter.cpp > -+++ b/taglib/toolkit/trefcounter.cpp > -@@ -52,7 +52,7 @@ > - # define ATOMIC_INC(x) __sync_add_and_fetch(&x, 1) > - # define ATOMIC_DEC(x) __sync_sub_and_fetch(&x, 1) > - #else > --# define ATOMIC_INT volatile int > -+# define ATOMIC_INT int > - # define ATOMIC_INC(x) (++x) > - # define ATOMIC_DEC(x) (--x) > - #endif > diff --git a/package/taglib/taglib.hash b/package/taglib/taglib.hash > index 38a44b41a5..7d1b2e8422 100644 > --- a/package/taglib/taglib.hash > +++ b/package/taglib/taglib.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 7fccd07669a523b07a15bd24c8da1bbb92206cb19e9366c3692af3d79253b703 taglib-1.12.tar.gz > +sha256 58f08b4db3dc31ed152c04896ee9172d22052bc7ef12888028c01d8b1d60ade0 taglib-1.13.tar.gz > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 COPYING.LGPL > sha256 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f COPYING.MPL > diff --git a/package/taglib/taglib.mk b/package/taglib/taglib.mk > index 9513e0d0e1..c687891002 100644 > --- a/package/taglib/taglib.mk > +++ b/package/taglib/taglib.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -TAGLIB_VERSION = 1.12 > +TAGLIB_VERSION = 1.13 > TAGLIB_SITE = http://taglib.github.io/releases > TAGLIB_INSTALL_STAGING = YES > TAGLIB_LICENSE = LGPL-2.1 or MPL-1.1 > @@ -13,6 +13,9 @@ TAGLIB_CPE_ID_VENDOR = taglib > > ifeq ($(BR2_PACKAGE_ZLIB),y) > TAGLIB_DEPENDENCIES += zlib > +TAGLIB_CONF_OPTS += -DWITH_ZLIB=ON > +else > +TAGLIB_CONF_OPTS += -DWITH_ZLIB=OFF > endif > > define TAGLIB_REMOVE_DEVFILE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:17:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:17:42 +0100 Subject: [Buildroot] [PATCH 1/1] package/qlibc: bump to version 2.4.7 In-Reply-To: <20221029075511.6599-1-fontaine.fabrice@gmail.com> References: <20221029075511.6599-1-fontaine.fabrice@gmail.com> Message-ID: <20221030161742.GM1058960@scaer> Fabrice, All, On 2022-10-29 09:55 +0200, Fabrice Fontaine spake thusly: > https://github.com/wolkykim/qlibc/releases/tag/v2.4.7 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/qlibc/qlibc.hash | 2 +- > package/qlibc/qlibc.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/qlibc/qlibc.hash b/package/qlibc/qlibc.hash > index 5cd6e1860f..9b2af1a4e3 100644 > --- a/package/qlibc/qlibc.hash > +++ b/package/qlibc/qlibc.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 bd98c19f96c0d374adb69c99627c80cf967b5e860c8a4f28c13fa1b0d652a06e qlibc-2.4.6.tar.gz > +sha256 ddb27da8ee6f3bf558e5d1d21d3d392c8a6f12d25767c5f70f4e757d814900c9 qlibc-2.4.7.tar.gz > sha256 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132 LICENSE > diff --git a/package/qlibc/qlibc.mk b/package/qlibc/qlibc.mk > index 3996bb3706..838ba68746 100644 > --- a/package/qlibc/qlibc.mk > +++ b/package/qlibc/qlibc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -QLIBC_VERSION = 2.4.6 > +QLIBC_VERSION = 2.4.7 > QLIBC_SITE = $(call github,wolkykim,qlibc,v$(QLIBC_VERSION)) > QLIBC_LICENSE = BSD-2-Clause > QLIBC_LICENSE_FILES = LICENSE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:25:39 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:25:39 +0100 Subject: [Buildroot] [PATCH 1/1] package/bdwgc: bump to version 8.2.2 In-Reply-To: <20221030155032.197144-1-paguilar@paguilar.org> References: <20221030155032.197144-1-paguilar@paguilar.org> Message-ID: <20221030162539.GN1058960@scaer> Pedro, All, On 2022-10-30 16:50 +0100, Pedro Aguilar spake thusly: > Signed-off-by: Pedro Aguilar > --- > package/bdwgc/bdwgc.hash | 2 +- > package/bdwgc/bdwgc.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash > index 4276939083..ca094549c9 100644 > --- a/package/bdwgc/bdwgc.hash > +++ b/package/bdwgc/bdwgc.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz > +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz > sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK > diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk > index cefa975998..e776fb7458 100644 > --- a/package/bdwgc/bdwgc.mk > +++ b/package/bdwgc/bdwgc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BDWGC_VERSION = 8.0.6 > +BDWGC_VERSION = 8.2.2 $ make bdwgc-legal-info >>> bdwgc 8.2.2 Collecting legal info ERROR: README.QUICK has wrong sha256 hash: ERROR: expected: 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 ERROR: got : a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a ERROR: Incomplete download, or man-in-the-middle (MITM) attack make[1]: *** [package/bdwgc/bdwgc.mk:40: bdwgc-legal-info] Error 1 Can you check what changed in the licensing terms, fix the hash file, and (briefly) explain that change as a comment in the commit log, please? Regards, Yann E. MORIN. > BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz > BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) > BDWGC_INSTALL_STAGING = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:20:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:11 +0100 Subject: [Buildroot] [git commit] package/ndisc6: bump to version 1.0.6 Message-ID: <20221030162807.1B1F6875A3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=800eef905aac67b2dbd2446c6d011227b473502f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master ndisc6: print NAT64 prefix if present. rdnssd: fix timeout calculation. https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/ndisc6/ndisc6.hash | 2 +- package/ndisc6/ndisc6.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash index d76e831208..e258382c53 100644 --- a/package/ndisc6/ndisc6.hash +++ b/package/ndisc6/ndisc6.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 # Locally computed sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk index ff6439e310..23734ca7d7 100644 --- a/package/ndisc6/ndisc6.mk +++ b/package/ndisc6/ndisc6.mk @@ -4,7 +4,7 @@ # ################################################################################ -NDISC6_VERSION = 1.0.5 +NDISC6_VERSION = 1.0.6 NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 NDISC6_SITE = http://www.remlab.net/files/ndisc6 NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) From yann.morin.1998 at free.fr Sun Oct 30 16:20:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:15 +0100 Subject: [Buildroot] [git commit] package/mtr: bump to version 0.95 Message-ID: <20221030162807.30874875A5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=79cfc6841943fed1428ea59747920d6b68962b9e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/traviscross/mtr/blob/v0.95/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mtr/mtr.hash | 2 +- package/mtr/mtr.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash index d6062ef08f..399799f49e 100644 --- a/package/mtr/mtr.hash +++ b/package/mtr/mtr.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk index 07c58a1e93..d3e3b1a97a 100644 --- a/package/mtr/mtr.mk +++ b/package/mtr/mtr.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTR_VERSION = 0.94 +MTR_VERSION = 0.95 MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) MTR_AUTORECONF = YES MTR_DEPENDENCIES = \ From yann.morin.1998 at free.fr Sun Oct 30 16:20:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:06 +0100 Subject: [Buildroot] [git commit] package/numactl: use official license files Message-ID: <20221030162807.05266875A1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=702a60a2962172d725b210da42da2289a219a83f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use official license files available since version 2.0.13 and https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/numactl/numactl.hash | 3 ++- package/numactl/numactl.mk | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index 802175d360..a261eab9d0 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,3 +1,4 @@ # Locally calculated sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index cf9c759693..6ff94091e9 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -7,7 +7,7 @@ NUMACTL_VERSION = 2.0.14 NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) -NUMACTL_LICENSE_FILES = README.md +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" From yann.morin.1998 at free.fr Sun Oct 30 16:20:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:13 +0100 Subject: [Buildroot] [git commit] package/mxml: bump to version 3.3.1 Message-ID: <20221030162807.25C4F875A4@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f67480040b575fb225fcc2cd79c7a5408ef253b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of NOTICE (update in year: https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mxml/mxml.hash | 4 ++-- package/mxml/mxml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash index 38056f4c3a..412977dff0 100644 --- a/package/mxml/mxml.hash +++ b/package/mxml/mxml.hash @@ -1,4 +1,4 @@ # Locally computed -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk index 88d35cb7ee..d224cf5308 100644 --- a/package/mxml/mxml.mk +++ b/package/mxml/mxml.mk @@ -4,7 +4,7 @@ # ################################################################################ -MXML_VERSION = 3.3 +MXML_VERSION = 3.3.1 MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) MXML_LICENSE = Apache-2.0 with exceptions MXML_LICENSE_FILES = LICENSE NOTICE From yann.morin.1998 at free.fr Sun Oct 30 16:20:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:17 +0100 Subject: [Buildroot] [git commit] package/mtd: bump to version 2.1.5 Message-ID: <20221030162807.3BAC987570@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=517db8e59c30da4d20d93d61466a6c90c5e22a6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/mtd/mtd.hash | 4 ++-- package/mtd/mtd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash index 481788f844..a2133e3ce2 100644 --- a/package/mtd/mtd.hash +++ b/package/mtd/mtd.hash @@ -1,4 +1,4 @@ # Locally calculated after checking pgp signature -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk index 45e7c0c61c..6e266a8760 100644 --- a/package/mtd/mtd.mk +++ b/package/mtd/mtd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MTD_VERSION = 2.1.3 +MTD_VERSION = 2.1.5 MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils MTD_LICENSE = GPL-2.0 From yann.morin.1998 at free.fr Sun Oct 30 16:20:09 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:20:09 +0100 Subject: [Buildroot] [git commit] package/numactl: bump to version 2.0.16 Message-ID: <20221030162807.1055687570@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e9bc980d93a189a16e7320bd254b906c87ca9f87 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Drop patches (already in version) - Use official tarball and so drop autoreconf https://github.com/numactl/numactl/releases/tag/v2.0.15 https://github.com/numactl/numactl/releases/tag/v2.0.16 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- .../0001-Do-not-stringify-SYMVER-symbols.patch | 25 ----------- .../numactl/0002-link-with-latomic-if-needed.patch | 52 ---------------------- package/numactl/numactl.hash | 2 +- package/numactl/numactl.mk | 6 +-- 4 files changed, 4 insertions(+), 81 deletions(-) diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch deleted file mode 100644 index c6981aaf73..0000000000 --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 -From: Scott McMillan -Date: Fri, 9 Oct 2020 08:56:52 -0500 -Subject: [PATCH] Do not stringify SYMVER symbols - -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a -Signed-off-by: Thomas Petazzoni ---- - util.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/util.h b/util.h -index 99ada33..f2a20ac 100644 ---- a/util.h -+++ b/util.h -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); - #if HAVE_ATTRIBUTE_SYMVER - #define SYMVER(a,b) __attribute__ ((symver (b))) - #else --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); -+#define SYMVER(a,b) __asm__ (".symver " a "," b); - #endif --- -2.30.2 - diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch deleted file mode 100644 index 6dff0cb233..0000000000 --- a/package/numactl/0002-link-with-latomic-if-needed.patch +++ /dev/null @@ -1,52 +0,0 @@ -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Thu, 6 May 2021 23:08:36 +0200 -Subject: [PATCH] link with -latomic if needed - -numactl unconditionally uses __atomic_fetch_and but some architectures -(e.g. sparc) needs to link with -latomic to be able to use it. So check -if -latomic is needed and update numa.pc accordingly - -Signed-off-by: Fabrice Fontaine -[Retrieved from: -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] ---- - Makefile.am | 1 + - configure.ac | 2 ++ - numa.pc.in | 1 + - 3 files changed, 4 insertions(+) - -diff --git a/Makefile.am b/Makefile.am -index 44d0d76..34f6815 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -151,6 +151,7 @@ SED_PROCESS = \ - -e 's, at exec_prefix\@,$(exec_prefix),g' \ - -e 's, at libdir\@,$(libdir),g' \ - -e 's, at includedir\@,$(includedir),g' \ -+ -e 's, at LIBS\@,$(LIBS),g' \ - < $< > $@ || rm $@ - - %.pc: %.pc.in Makefile -diff --git a/configure.ac b/configure.ac -index 659a765..e3b0eb3 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) - - AC_CONFIG_FILES([Makefile]) - -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) -+ - # GCC tries to be "helpful" and only issue a warning for unrecognized - # attributes. So we compile the test with Werror, so that if the - # attribute is not recognized the compilation fails -diff --git a/numa.pc.in b/numa.pc.in -index 8a0f202..cc04d50 100644 ---- a/numa.pc.in -+++ b/numa.pc.in -@@ -8,3 +8,4 @@ Description: NUMA policy library - Version: @VERSION@ - Cflags: -I${includedir} - Libs: -L${libdir} -lnuma -+Libs.Private: @LIBS@ diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash index a261eab9d0..757001b750 100644 --- a/package/numactl/numactl.hash +++ b/package/numactl/numactl.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk index 6ff94091e9..b2f349255f 100644 --- a/package/numactl/numactl.mk +++ b/package/numactl/numactl.mk @@ -4,12 +4,12 @@ # ################################################################################ -NUMACTL_VERSION = 2.0.14 -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) +NUMACTL_VERSION = 2.0.16 +NUMACTL_SITE = \ + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 NUMACTL_INSTALL_STAGING = YES -NUMACTL_AUTORECONF = YES NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" $(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 16:28:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:23 +0100 Subject: [Buildroot] [PATCH 1/2] package/numactl: use official license files In-Reply-To: <20221029084455.97704-1-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162823.GO1058960@scaer> Fabrice, All, On 2022-10-29 10:44 +0200, Fabrice Fontaine spake thusly: > Use official license files available since version 2.0.13 and > https://github.com/numactl/numactl/commit/b4d36f6a34b045a67ed5c0314ec26f5514f4ee44 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/numactl/numactl.hash | 3 ++- > package/numactl/numactl.mk | 2 +- > 2 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash > index 802175d360..a261eab9d0 100644 > --- a/package/numactl/numactl.hash > +++ b/package/numactl/numactl.hash > @@ -1,3 +1,4 @@ > # Locally calculated > sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz > -sha256 e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575 README.md > +sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 > +sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 > diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk > index cf9c759693..6ff94091e9 100644 > --- a/package/numactl/numactl.mk > +++ b/package/numactl/numactl.mk > @@ -7,7 +7,7 @@ > NUMACTL_VERSION = 2.0.14 > NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) > NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) > -NUMACTL_LICENSE_FILES = README.md > +NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 > NUMACTL_INSTALL_STAGING = YES > NUMACTL_AUTORECONF = YES > NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:28:37 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:37 +0100 Subject: [Buildroot] [PATCH 2/2] package/numactl: bump to version 2.0.16 In-Reply-To: <20221029084455.97704-2-fontaine.fabrice@gmail.com> References: <20221029084455.97704-1-fontaine.fabrice@gmail.com> <20221029084455.97704-2-fontaine.fabrice@gmail.com> Message-ID: <20221030162837.GP1058960@scaer> Fabrice, All, On 2022-10-29 10:44 +0200, Fabrice Fontaine spake thusly: > - Drop patches (already in version) > - Use official tarball and so drop autoreconf > > https://github.com/numactl/numactl/releases/tag/v2.0.15 > https://github.com/numactl/numactl/releases/tag/v2.0.16 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...0001-Do-not-stringify-SYMVER-symbols.patch | 25 --------- > .../0002-link-with-latomic-if-needed.patch | 52 ------------------- > package/numactl/numactl.hash | 2 +- > package/numactl/numactl.mk | 6 +-- > 4 files changed, 4 insertions(+), 81 deletions(-) > delete mode 100644 package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > delete mode 100644 package/numactl/0002-link-with-latomic-if-needed.patch > > diff --git a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch b/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > deleted file mode 100644 > index c6981aaf73..0000000000 > --- a/package/numactl/0001-Do-not-stringify-SYMVER-symbols.patch > +++ /dev/null > @@ -1,25 +0,0 @@ > -From f96c96af7fbf2779b15f66f03b10315a24fb4f5a Mon Sep 17 00:00:00 2001 > -From: Scott McMillan > -Date: Fri, 9 Oct 2020 08:56:52 -0500 > -Subject: [PATCH] Do not stringify SYMVER symbols > - > -Upstream: f96c96af7fbf2779b15f66f03b10315a24fb4f5a > -Signed-off-by: Thomas Petazzoni > ---- > - util.h | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/util.h b/util.h > -index 99ada33..f2a20ac 100644 > ---- a/util.h > -+++ b/util.h > -@@ -22,5 +22,5 @@ extern char *policy_name(int policy); > - #if HAVE_ATTRIBUTE_SYMVER > - #define SYMVER(a,b) __attribute__ ((symver (b))) > - #else > --#define SYMVER(a,b) __asm__ (".symver " #a "," #b); > -+#define SYMVER(a,b) __asm__ (".symver " a "," b); > - #endif > --- > -2.30.2 > - > diff --git a/package/numactl/0002-link-with-latomic-if-needed.patch b/package/numactl/0002-link-with-latomic-if-needed.patch > deleted file mode 100644 > index 6dff0cb233..0000000000 > --- a/package/numactl/0002-link-with-latomic-if-needed.patch > +++ /dev/null > @@ -1,52 +0,0 @@ > -From e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Thu, 6 May 2021 23:08:36 +0200 > -Subject: [PATCH] link with -latomic if needed > - > -numactl unconditionally uses __atomic_fetch_and but some architectures > -(e.g. sparc) needs to link with -latomic to be able to use it. So check > -if -latomic is needed and update numa.pc accordingly > - > -Signed-off-by: Fabrice Fontaine > -[Retrieved from: > -https://github.com/numactl/numactl/commit/e0de0d9e981ddb53bdeb4a4b9dc43046c9ff4ff9] > ---- > - Makefile.am | 1 + > - configure.ac | 2 ++ > - numa.pc.in | 1 + > - 3 files changed, 4 insertions(+) > - > -diff --git a/Makefile.am b/Makefile.am > -index 44d0d76..34f6815 100644 > ---- a/Makefile.am > -+++ b/Makefile.am > -@@ -151,6 +151,7 @@ SED_PROCESS = \ > - -e 's, at exec_prefix\@,$(exec_prefix),g' \ > - -e 's, at libdir\@,$(libdir),g' \ > - -e 's, at includedir\@,$(includedir),g' \ > -+ -e 's, at LIBS\@,$(LIBS),g' \ > - < $< > $@ || rm $@ > - > - %.pc: %.pc.in Makefile > -diff --git a/configure.ac b/configure.ac > -index 659a765..e3b0eb3 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -24,6 +24,8 @@ AM_CONDITIONAL([HAVE_TREE_VECTORIZE], [test x"${tree_vectorize}" = x"true"]) > - > - AC_CONFIG_FILES([Makefile]) > - > -+AC_SEARCH_LIBS([__atomic_fetch_and_1], [atomic]) > -+ > - # GCC tries to be "helpful" and only issue a warning for unrecognized > - # attributes. So we compile the test with Werror, so that if the > - # attribute is not recognized the compilation fails > -diff --git a/numa.pc.in b/numa.pc.in > -index 8a0f202..cc04d50 100644 > ---- a/numa.pc.in > -+++ b/numa.pc.in > -@@ -8,3 +8,4 @@ Description: NUMA policy library > - Version: @VERSION@ > - Cflags: -I${includedir} > - Libs: -L${libdir} -lnuma > -+Libs.Private: @LIBS@ > diff --git a/package/numactl/numactl.hash b/package/numactl/numactl.hash > index a261eab9d0..757001b750 100644 > --- a/package/numactl/numactl.hash > +++ b/package/numactl/numactl.hash > @@ -1,4 +1,4 @@ > # Locally calculated > -sha256 1ee27abd07ff6ba140aaf9bc6379b37825e54496e01d6f7343330cf1a4487035 numactl-2.0.14.tar.gz > +sha256 1b242f893af977a1d31af6ce9d6b8dafdd2d8ec3dc9207f7c2dc0d3446e7c7c8 numactl-2.0.16.tar.gz > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 LICENSE.GPL2 > sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 > diff --git a/package/numactl/numactl.mk b/package/numactl/numactl.mk > index 6ff94091e9..b2f349255f 100644 > --- a/package/numactl/numactl.mk > +++ b/package/numactl/numactl.mk > @@ -4,12 +4,12 @@ > # > ################################################################################ > > -NUMACTL_VERSION = 2.0.14 > -NUMACTL_SITE = $(call github,numactl,numactl,v$(NUMACTL_VERSION)) > +NUMACTL_VERSION = 2.0.16 > +NUMACTL_SITE = \ > + https://github.com/numactl/numactl/releases/download/v$(NUMACTL_VERSION) > NUMACTL_LICENSE = LGPL-2.1 (libnuma), GPL-2.0 (programs) > NUMACTL_LICENSE_FILES = LICENSE.GPL2 LICENSE.LGPL2.1 > NUMACTL_INSTALL_STAGING = YES > -NUMACTL_AUTORECONF = YES > NUMACTL_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -fPIC" > > $(eval $(autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:28:53 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:28:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/ndisc6: bump to version 1.0.6 In-Reply-To: <20221029085622.104382-1-fontaine.fabrice@gmail.com> References: <20221029085622.104382-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162853.GQ1058960@scaer> Fabrice, All, On 2022-10-29 10:56 +0200, Fabrice Fontaine spake thusly: > ndisc6: print NAT64 prefix if present. > rdnssd: fix timeout calculation. > > https://git.remlab.net/gitweb/?p=ndisc6.git;a=blob;f=NEWS;h=d9e87a5307ae7f50355ba2eaac1171c6c4ff9c47 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/ndisc6/ndisc6.hash | 2 +- > package/ndisc6/ndisc6.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/ndisc6/ndisc6.hash b/package/ndisc6/ndisc6.hash > index d76e831208..e258382c53 100644 > --- a/package/ndisc6/ndisc6.hash > +++ b/package/ndisc6/ndisc6.hash > @@ -1,4 +1,4 @@ > # Locally calculated after checking pgp signature > -sha256 36932f9fc47e2844abcda7550fa1343b3af4b4208dfb61e0c9d9224aad5df351 ndisc6-1.0.5.tar.bz2 > +sha256 a713210e9be1f15cfa0809f4c2728b00cd5f25881d7585126986982055453cfb ndisc6-1.0.6.tar.bz2 > # Locally computed > sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6 COPYING > diff --git a/package/ndisc6/ndisc6.mk b/package/ndisc6/ndisc6.mk > index ff6439e310..23734ca7d7 100644 > --- a/package/ndisc6/ndisc6.mk > +++ b/package/ndisc6/ndisc6.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -NDISC6_VERSION = 1.0.5 > +NDISC6_VERSION = 1.0.6 > NDISC6_SOURCE = ndisc6-$(NDISC6_VERSION).tar.bz2 > NDISC6_SITE = http://www.remlab.net/files/ndisc6 > NDISC6_CONF_ENV = CC="$(TARGET_CC) -std=c11" LIBS=$(TARGET_NLS_LIBS) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/mxml: bump to version 3.3.1 In-Reply-To: <20221029092517.115919-1-fontaine.fabrice@gmail.com> References: <20221029092517.115919-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162907.GR1058960@scaer> Fabrice, All, On 2022-10-29 11:25 +0200, Fabrice Fontaine spake thusly: > Update hash of NOTICE (update in year: > https://github.com/michaelrsweet/mxml/commit/d32818a16ceb352b8889f95ec7ff65575ad2e4f2) > > https://github.com/michaelrsweet/mxml/releases/tag/v3.3.1 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mxml/mxml.hash | 4 ++-- > package/mxml/mxml.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/mxml/mxml.hash b/package/mxml/mxml.hash > index 38056f4c3a..412977dff0 100644 > --- a/package/mxml/mxml.hash > +++ b/package/mxml/mxml.hash > @@ -1,4 +1,4 @@ > # Locally computed > -sha256 7cf976366f9e8e4f8cff7d35a59bcf6201c769fce9e58015d64f4b6de1fe3dd8 mxml-3.3.tar.gz > +sha256 0c663ed1fe393b5619f80101798202eea43534abd7c8aff389022fd8c1dacc32 mxml-3.3.1.tar.gz > sha256 c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4 LICENSE > -sha256 ed63aec4c75b9c21a5156b40052138032269bd27fd6f4bc0c51389807cdc7db9 NOTICE > +sha256 7dedb0043b0bbed7880bcc9724b3a3dae4d5ab2dce98a7904703109572b626e3 NOTICE > diff --git a/package/mxml/mxml.mk b/package/mxml/mxml.mk > index 88d35cb7ee..d224cf5308 100644 > --- a/package/mxml/mxml.mk > +++ b/package/mxml/mxml.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MXML_VERSION = 3.3 > +MXML_VERSION = 3.3.1 > MXML_SITE = https://github.com/michaelrsweet/mxml/releases/download/v$(MXML_VERSION) > MXML_LICENSE = Apache-2.0 with exceptions > MXML_LICENSE_FILES = LICENSE NOTICE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/mtr: bump to version 0.95 In-Reply-To: <20221029093947.124529-1-fontaine.fabrice@gmail.com> References: <20221029093947.124529-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162921.GS1058960@scaer> Fabrice, All, On 2022-10-29 11:39 +0200, Fabrice Fontaine spake thusly: > https://github.com/traviscross/mtr/blob/v0.95/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mtr/mtr.hash | 2 +- > package/mtr/mtr.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/mtr/mtr.hash b/package/mtr/mtr.hash > index d6062ef08f..399799f49e 100644 > --- a/package/mtr/mtr.hash > +++ b/package/mtr/mtr.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 ea036fdd45da488c241603f6ea59a06bbcfe6c26177ebd34fff54336a44494b8 mtr-0.94.tar.gz > +sha256 12490fb660ba5fb34df8c06a0f62b4f9cbd11a584fc3f6eceda0a99124e8596f mtr-0.95.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/mtr/mtr.mk b/package/mtr/mtr.mk > index 07c58a1e93..d3e3b1a97a 100644 > --- a/package/mtr/mtr.mk > +++ b/package/mtr/mtr.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MTR_VERSION = 0.94 > +MTR_VERSION = 0.95 > MTR_SITE = $(call github,traviscross,mtr,v$(MTR_VERSION)) > MTR_AUTORECONF = YES > MTR_DEPENDENCIES = \ > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:29:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:29:40 +0100 Subject: [Buildroot] [PATCH 1/1] package/mtd: bump to version 2.1.5 In-Reply-To: <20221029094535.133025-1-fontaine.fabrice@gmail.com> References: <20221029094535.133025-1-fontaine.fabrice@gmail.com> Message-ID: <20221030162940.GT1058960@scaer> Fabrice, All, On 2022-10-29 11:45 +0200, Fabrice Fontaine spake thusly: > https://lists.infradead.org/pipermail/linux-mtd/2022-October/095383.html > https://lists.infradead.org/pipermail/linux-mtd/2022-January/090742.html > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/mtd/mtd.hash | 4 ++-- > package/mtd/mtd.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/mtd/mtd.hash b/package/mtd/mtd.hash > index 481788f844..a2133e3ce2 100644 > --- a/package/mtd/mtd.hash > +++ b/package/mtd/mtd.hash > @@ -1,4 +1,4 @@ > # Locally calculated after checking pgp signature > -# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.3.tar.bz2.asc > -sha256 11305a5daf6fc6ed85120695c8593290b577effb039adbfa63d35b4418ff5630 mtd-utils-2.1.3.tar.bz2 > +# ftp://ftp.infradead.org/pub/mtd-utils/mtd-utils-2.1.5.tar.bz2.asc > +sha256 386e27fd121699b6b729bc2e8e04dda987b31cca6b16e12fb6cc6dcf26449f46 mtd-utils-2.1.5.tar.bz2 > sha256 dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa COPYING > diff --git a/package/mtd/mtd.mk b/package/mtd/mtd.mk > index 45e7c0c61c..6e266a8760 100644 > --- a/package/mtd/mtd.mk > +++ b/package/mtd/mtd.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MTD_VERSION = 2.1.3 > +MTD_VERSION = 2.1.5 > MTD_SOURCE = mtd-utils-$(MTD_VERSION).tar.bz2 > MTD_SITE = ftp://ftp.infradead.org/pub/mtd-utils > MTD_LICENSE = GPL-2.0 > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:45:45 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:45:45 +0100 Subject: [Buildroot] [PATCH 1/1] Force cmake packages to use makefiles In-Reply-To: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> References: <94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel@carnegierobotics.com> Message-ID: <20221030164545.GU1058960@scaer> Woody, All, On 2022-10-07 16:27 +0000, Woody Douglass via buildroot spake thusly: > > Force cmake packages to use the "Unix Makefiles" generator > in case CMAKE_GENERATOR is set in the host environment. This > patch further isolates the buildroot build environment from > the host. > > Signed-off-by: Woodrow Douglass > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..db9fdebb8d 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/to > olchainfile.cmake" \ Your patch was damaged, so I had to manaully fix it when applying. Normally, sending patches with "git send-email" takes care of properly formatting patches. Applied to master, thanks. Regards, Yann E. MORIN. > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > -- > 2.20.1 > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:48:25 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:48:25 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: unset CMAKE_GENERATOR vars In-Reply-To: <20221029110943.155259-1-glex.spb@gmail.com> References: <20221029110943.155259-1-glex.spb@gmail.com> Message-ID: <20221030164825.GV1058960@scaer> Gleb, All, On 2022-10-29 12:09 +0100, Gleb Mazovetskiy spake thusly: > If the user environment defines `CMAKE_GENERATOR` (e.g. > `CMAKE_GENERATOR=Ninja`), buildroot would previously fail to build cmake > packages because buildroot uses `make` explicitly (as opposed to > `cmake --build`). > > Unsets all the `CMAKE_GENERATOR*` variables before configuring a cmake > package. > > Signed-off-by: Gleb Mazovetskiy > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..96b2579cc5 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -86,6 +86,7 @@ define $(2)_CONFIGURE_CMDS > (mkdir -p $$($$(PKG)_BUILDDIR) && \ > cd $$($$(PKG)_BUILDDIR) && \ > rm -f CMakeCache.txt && \ > + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ I've instead applied the patch from Woody: https://patchwork.ozlabs.org/project/buildroot/patch/94745932ea2dfa030e3d438d7cf6b84f1ef2f69c.camel at carnegierobotics.com/ So I dropped your patch. In the future, we should be able to replace the hard-coded "Unix Makefiles" with a per-package setting, where package can elect building built with nother backend (or better yet, switch netirely to another backend globally), and the patch from Woody felt like slightly preparing for that future. Regards, Yann E. MORIN. > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > @@ -111,6 +112,7 @@ define $(2)_CONFIGURE_CMDS > (mkdir -p $$($$(PKG)_BUILDDIR) && \ > cd $$($$(PKG)_BUILDDIR) && \ > rm -f CMakeCache.txt && \ > + unset CMAKE_GENERATOR CMAKE_GENERATOR_PLATFORM CMAKE_GENERATOR_TOOLSET CMAKE_GENERATOR_INSTANCE && \ > PATH=$$(BR_PATH) \ > PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \ > PKG_CONFIG_SYSROOT_DIR="/" \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 16:43:11 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:43:11 +0100 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles Message-ID: <20221030164840.BABD7875A8@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Force cmake packages to use the "Unix Makefiles" generator in case CMAKE_GENERATOR is set in the host environment. This patch further isolates the buildroot build environment from the host. Signed-off-by: Woodrow Douglass Signed-off-by: Yann E. MORIN --- package/pkg-cmake.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index 081960b5bf..db9fdebb8d 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ + -G"Unix MakeFiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ From yann.morin.1998 at free.fr Sun Oct 30 16:53:16 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 17:53:16 +0100 Subject: [Buildroot] [PATCH 1/1] package/openipmi: bump to version 2.0.33 In-Reply-To: <20221029083130.77419-1-fontaine.fabrice@gmail.com> References: <20221029083130.77419-1-fontaine.fabrice@gmail.com> Message-ID: <20221030165316.GW1058960@scaer> Fabrice, All, On 2022-10-29 10:31 +0200, Fabrice Fontaine spake thusly: > Drop patch (already in version) and so also drop autoreconf > > Signed-off-by: Fabrice Fontaine [--SNIP--] > diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk > index 81492ec131..ccf86f93cd 100644 > --- a/package/openipmi/openipmi.mk > +++ b/package/openipmi/openipmi.mk > @@ -4,15 +4,13 @@ > # > ################################################################################ > > -OPENIPMI_VERSION = 2.0.32 > +OPENIPMI_VERSION = 2.0.33 > OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library > OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz > OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause > OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD > OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf > OPENIPMI_INSTALL_STAGING = YES > -# Patching Makefile.am > -OPENIPMI_AUTORECONF = YES > OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" > OPENIPMI_CONF_OPTS = \ > --with-glib=no \ This hunk does not apply, because the _CONF_OPTS are different: OPENIPMI_CONF_OPTS = \ --with-execinfo=no \ --with-glib=no \ --with-tcl=no \ ... Do you have local changes you forgot? Regards, Yann E. MORIN. > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From paguilar at paguilar.org Sun Oct 30 17:26:39 2022 From: paguilar at paguilar.org (Pedro Aguilar) Date: Sun, 30 Oct 2022 18:26:39 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030172639.199134-1-paguilar@paguilar.org> The license in file README.QUICK remains unchanged, but some C++ instructions change along with a few small typos/fixes. Signed-off-by: Pedro Aguilar --- Changes v1 -> v2: - Update license file hash (pointed out by Yann) --- package/bdwgc/bdwgc.hash | 4 ++-- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..917089da08 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES -- 2.34.1 From fontaine.fabrice at gmail.com Sun Oct 30 17:56:32 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 18:56:32 +0100 Subject: [Buildroot] [PATCH v2, 2/2] package/openipmi: bump to version 2.0.33 In-Reply-To: <20221030175632.4139-1-fontaine.fabrice@gmail.com> References: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Message-ID: <20221030175632.4139-2-fontaine.fabrice@gmail.com> Drop patch (already in version) and so also drop autoreconf Signed-off-by: Fabrice Fontaine --- ...01-Avoid-searching-host-library-path.patch | 53 ------------------- package/openipmi/openipmi.hash | 6 +-- package/openipmi/openipmi.mk | 4 +- 3 files changed, 4 insertions(+), 59 deletions(-) delete mode 100644 package/openipmi/0001-Avoid-searching-host-library-path.patch diff --git a/package/openipmi/0001-Avoid-searching-host-library-path.patch b/package/openipmi/0001-Avoid-searching-host-library-path.patch deleted file mode 100644 index 15b4510f67..0000000000 --- a/package/openipmi/0001-Avoid-searching-host-library-path.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: Baruch Siach -Date: Wed, 22 Jul 2015 07:04:33 +0300 -Subject: [PATCH] Avoid searching host library path - -The $(libdir) variable points to the location of the directory on the target -system, /usr/lib by default. When cross compiling this directory contains the -host libraries which may be different than target libraries. Don't use -$(libdir) in the library search path. - -Signed-off-by: Baruch Siach -Signed-off-by: Joel Stanley -[Fabrice: refresh patch for 2.0.32] -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/35] ---- - cmdlang/Makefile.am | 3 +-- - unix/Makefile.am | 6 ++---- - 2 files changed, 3 insertions(+), 6 deletions(-) - -diff --git a/cmdlang/Makefile.am b/cmdlang/Makefile.am -index 264ee12be79f..0b3843784656 100644 ---- a/cmdlang/Makefile.am -+++ b/cmdlang/Makefile.am -@@ -15,7 +15,7 @@ libOpenIPMIcmdlang_la_SOURCES = cmdlang.c cmd_domain.c cmd_entity.c cmd_mc.c \ - $(top_builddir)/utils/libOpenIPMIutils.la \ - $(top_builddir)/lib/libOpenIPMI.la - libOpenIPMIcmdlang_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - bin_PROGRAMS = openipmish - -diff --git a/unix/Makefile.am b/unix/Makefile.am -index 5128839dad13..bd0f897ba8d6 100644 ---- a/unix/Makefile.am -+++ b/unix/Makefile.am -@@ -10,12 +10,12 @@ lib_LTLIBRARIES = libOpenIPMIposix.la libOpenIPMIpthread.la - libOpenIPMIpthread_la_LIBADD = -lpthread $(GDBM_LIB) \ - $(top_builddir)/utils/libOpenIPMIutils.la $(RT_LIB) - libOpenIPMIpthread_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - libOpenIPMIposix_la_SOURCES = posix_os_hnd.c selector.c - libOpenIPMIposix_la_LIBADD = $(top_builddir)/utils/libOpenIPMIutils.la \ - $(GDBM_LIB) $(RT_LIB) - libOpenIPMIposix_la_LDFLAGS = -rdynamic -version-info $(LD_VERSION) \ -- -L$(libdir) -no-undefined -+ -no-undefined - - noinst_HEADERS = heap.h - diff --git a/package/openipmi/openipmi.hash b/package/openipmi/openipmi.hash index eded076ade..fc3cf1a520 100644 --- a/package/openipmi/openipmi.hash +++ b/package/openipmi/openipmi.hash @@ -1,8 +1,8 @@ # From http://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library/ -sha1 73d7dce4312b006983b11367e4a43d4ec52cf888 OpenIPMI-2.0.32.tar.gz -md5 532404c9df7d0e8bde975b95b9e6775b OpenIPMI-2.0.32.tar.gz +sha1 4387f227aad92756e296d1c9421e83231d355dbd OpenIPMI-2.0.33.tar.gz +md5 923d2914dbbc3307712f8c58401bab0f OpenIPMI-2.0.33.tar.gz # Locally computed -sha256 f6d0fd4c0a74b05f80907229d0b270f54ca23294bcc11979f8b8d12766786945 OpenIPMI-2.0.32.tar.gz +sha256 fb53e9ea5e2681cf8af7cda024b1a0044c675f84116ca27ae9616c8b7ad95b49 OpenIPMI-2.0.33.tar.gz sha256 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670 COPYING sha256 185323a62589e7ee80f86bf2ea29caad9a09fdda0ea3f1c00db8b778c7edf60e COPYING.BSD sha256 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509 COPYING.LIB diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index 81492ec131..ccf86f93cd 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -4,15 +4,13 @@ # ################################################################################ -OPENIPMI_VERSION = 2.0.32 +OPENIPMI_VERSION = 2.0.33 OPENIPMI_SITE = https://sourceforge.net/projects/openipmi/files/OpenIPMI%202.0%20Library OPENIPMI_SOURCE = OpenIPMI-$(OPENIPMI_VERSION).tar.gz OPENIPMI_LICENSE = LGPL-2.0+, GPL-2.0+, BSD-3-Clause OPENIPMI_LICENSE_FILES = COPYING.LIB COPYING COPYING.BSD OPENIPMI_DEPENDENCIES = popt ncurses readline host-pkgconf OPENIPMI_INSTALL_STAGING = YES -# Patching Makefile.am -OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ --with-glib=no \ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 17:56:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 18:56:31 +0100 Subject: [Buildroot] [PATCH v2, 1/2] package/openipmi: add libexecinfo optional dependency Message-ID: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Add libexecinfo optional dependency as upstream rejected the patch to add --with-execinfo=no Signed-off-by: Fabrice Fontaine --- Changes v1 -> v2 (after review of Yann E. Morin): - Add missing local patch ...igure.ac-add-without-execinfo-option.patch | 55 ------------------- package/openipmi/openipmi.mk | 6 +- 2 files changed, 5 insertions(+), 56 deletions(-) delete mode 100644 package/openipmi/0002-configure.ac-add-without-execinfo-option.patch diff --git a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch b/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch deleted file mode 100644 index e1838a06f4..0000000000 --- a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 388033e3d0129510c3884333bc428cefeb75e0b8 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Mon, 3 Jan 2022 23:27:21 +0100 -Subject: [PATCH] configure.ac: add --without-execinfo option - -Add an option to allow the user to disable execinfo to avoid the -following build failure on musl with -https://github.com/mikroskeem/libexecinfo: - -/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/openipmi-2.0.28/utils/.libs/libOpenIPMIutils.so: undefined reference to `backtrace' - -Fixes: - - http://autobuild.buildroot.org/results/dcc33c5cca97d538231647a94212450f043974b3 - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://sourceforge.net/p/openipmi/patches/36] ---- - configure.ac | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 607864b9..f369166f 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -77,6 +77,16 @@ AC_ARG_WITH(poptlibs, - POPTLIBS="$withval" - ) - -+tryexecinfo=yes -+AC_ARG_WITH(execinfo, -+[ --with-execinfo[[=yes|no]] Look for execinfo.], -+ if test "x$withval" = "xyes"; then -+ tryexecinfo=yes -+ elif test "x$withval" = "xno"; then -+ tryexecinfo=no -+ fi, -+) -+ - # If UCD SNMP requires OpenSSL, this tells where to find the crypto lib - tryopenssl=yes - AC_ARG_WITH(openssl, -@@ -275,7 +285,9 @@ AM_PROG_CC_C_O - AC_PROG_LIBTOOL - AC_STDC_HEADERS - --AC_CHECK_HEADERS(execinfo.h) -+if test "x$tryexecinfo" != "xno"; then -+ AC_CHECK_HEADERS(execinfo.h) -+fi - AC_CHECK_HEADERS([netinet/ether.h]) - AC_CHECK_HEADERS([sys/ethernet.h]) - --- -2.34.1 - diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk index b3a4d90d4b..81492ec131 100644 --- a/package/openipmi/openipmi.mk +++ b/package/openipmi/openipmi.mk @@ -15,7 +15,6 @@ OPENIPMI_INSTALL_STAGING = YES OPENIPMI_AUTORECONF = YES OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" OPENIPMI_CONF_OPTS = \ - --with-execinfo=no \ --with-glib=no \ --with-tcl=no \ --with-perl=no \ @@ -26,6 +25,11 @@ ifeq ($(BR2_PACKAGE_GDBM),y) OPENIPMI_DEPENDENCIES += gdbm endif +ifeq ($(BR2_PACKAGE_LIBEXECINFO),y) +OPENIPMI_DEPENDENCIES += libexecinfo +OPENIPMI_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -lexecinfo" +endif + ifeq ($(BR2_PACKAGE_OPENSSL),y) OPENIPMI_DEPENDENCIES += openssl OPENIPMI_CONF_OPTS += --with-openssl=yes -- 2.35.1 From baruch at tkos.co.il Sun Oct 30 18:20:15 2022 From: baruch at tkos.co.il (Baruch Siach) Date: Sun, 30 Oct 2022 20:20:15 +0200 Subject: [Buildroot] [PATCH] package/libcurl: fix crypto backend selection Message-ID: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> Since version 7.77 --with-ssl that used to select OpenSSL renamed to --with-openssl. --without-ssl changed to mean no crypto backend. Only in version 7.86 setting both --without-ssl and some other crypto parameter became a hard configure error. Update OpenSSL selection parameter, and add --without-ssl explicitly for the case of no selected crypto backend. Fixes: http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ Cc: Matt Weber Signed-off-by: Baruch Siach --- package/libcurl/libcurl.mk | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 3c3ad082fc65..8de43581073d 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -50,6 +50,10 @@ endif LIBCURL_CONFIG_SCRIPTS = curl-config +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) +LIBCURL_CONF_OPTS += --without-ssl +endif + ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) LIBCURL_DEPENDENCIES += openssl # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs # are found first. LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ --with-ca-path=/etc/ssl/certs else -LIBCURL_CONF_OPTS += --without-ssl +LIBCURL_CONF_OPTS += --without-openssl endif ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 18:20:27 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 19:20:27 +0100 Subject: [Buildroot] [PATCH 1/1] package/batman-adv: bump to version 2022.2 Message-ID: <20221030182027.186259-1-fontaine.fabrice@gmail.com> This bump will fix the following build failure with kernel >= 5.18 thanks to https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ?batadv_bla_send_claim?: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ?netif_rx_any_context? [-Werror=implicit-function-declaration] 446 | netif_rx_any_context(skb); | ^~~~~~~~~~~~~~~~~~~~ Indeed, netif_rx_any_context has been dropped since kernel 5.18: https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst Fixes: - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 Signed-off-by: Fabrice Fontaine --- package/batman-adv/batman-adv.hash | 6 +++--- package/batman-adv/batman-adv.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash index c098663739..c5add4cdea 100644 --- a/package/batman-adv/batman-adv.hash +++ b/package/batman-adv/batman-adv.hash @@ -1,7 +1,7 @@ -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz # Hash for license files -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk index 6a1aaa699c..d279694bf5 100644 --- a/package/batman-adv/batman-adv.mk +++ b/package/batman-adv/batman-adv.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATMAN_ADV_VERSION = 2021.4 +BATMAN_ADV_VERSION = 2022.2 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT -- 2.35.1 From yann.morin.1998 at free.fr Sun Oct 30 18:20:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:20:41 +0100 Subject: [Buildroot] [PATCH v2, 1/2] package/openipmi: add libexecinfo optional dependency In-Reply-To: <20221030175632.4139-1-fontaine.fabrice@gmail.com> References: <20221030175632.4139-1-fontaine.fabrice@gmail.com> Message-ID: <20221030182041.GX1058960@scaer> Fabrice, All, On 2022-10-30 18:56 +0100, Fabrice Fontaine spake thusly: > Add libexecinfo optional dependency as upstream rejected the patch to > add --with-execinfo=no Indeed, they rejected it, but they suggested an alternate solution: check for backtrace() and whether it requires -lexecinfo. Something like: AC_SEARCH_LIBS( [backtrace], [execinfo], , [AC_MSG_ERROR([backtrace() not found and no library provides it; maybe install libexecinfo])] ) Regards, Yann E. MORIN. > Signed-off-by: Fabrice Fontaine > --- > Changes v1 -> v2 (after review of Yann E. Morin): > - Add missing local patch > > ...igure.ac-add-without-execinfo-option.patch | 55 ------------------- > package/openipmi/openipmi.mk | 6 +- > 2 files changed, 5 insertions(+), 56 deletions(-) > delete mode 100644 package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > > diff --git a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch b/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > deleted file mode 100644 > index e1838a06f4..0000000000 > --- a/package/openipmi/0002-configure.ac-add-without-execinfo-option.patch > +++ /dev/null > @@ -1,55 +0,0 @@ > -From 388033e3d0129510c3884333bc428cefeb75e0b8 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Mon, 3 Jan 2022 23:27:21 +0100 > -Subject: [PATCH] configure.ac: add --without-execinfo option > - > -Add an option to allow the user to disable execinfo to avoid the > -following build failure on musl with > -https://github.com/mikroskeem/libexecinfo: > - > -/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/openipmi-2.0.28/utils/.libs/libOpenIPMIutils.so: undefined reference to `backtrace' > - > -Fixes: > - - http://autobuild.buildroot.org/results/dcc33c5cca97d538231647a94212450f043974b3 > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: https://sourceforge.net/p/openipmi/patches/36] > ---- > - configure.ac | 14 +++++++++++++- > - 1 file changed, 13 insertions(+), 1 deletion(-) > - > -diff --git a/configure.ac b/configure.ac > -index 607864b9..f369166f 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -77,6 +77,16 @@ AC_ARG_WITH(poptlibs, > - POPTLIBS="$withval" > - ) > - > -+tryexecinfo=yes > -+AC_ARG_WITH(execinfo, > -+[ --with-execinfo[[=yes|no]] Look for execinfo.], > -+ if test "x$withval" = "xyes"; then > -+ tryexecinfo=yes > -+ elif test "x$withval" = "xno"; then > -+ tryexecinfo=no > -+ fi, > -+) > -+ > - # If UCD SNMP requires OpenSSL, this tells where to find the crypto lib > - tryopenssl=yes > - AC_ARG_WITH(openssl, > -@@ -275,7 +285,9 @@ AM_PROG_CC_C_O > - AC_PROG_LIBTOOL > - AC_STDC_HEADERS > - > --AC_CHECK_HEADERS(execinfo.h) > -+if test "x$tryexecinfo" != "xno"; then > -+ AC_CHECK_HEADERS(execinfo.h) > -+fi > - AC_CHECK_HEADERS([netinet/ether.h]) > - AC_CHECK_HEADERS([sys/ethernet.h]) > - > --- > -2.34.1 > - > diff --git a/package/openipmi/openipmi.mk b/package/openipmi/openipmi.mk > index b3a4d90d4b..81492ec131 100644 > --- a/package/openipmi/openipmi.mk > +++ b/package/openipmi/openipmi.mk > @@ -15,7 +15,6 @@ OPENIPMI_INSTALL_STAGING = YES > OPENIPMI_AUTORECONF = YES > OPENIPMI_CONF_ENV = ac_cv_path_pkgprog="$(PKG_CONFIG_HOST_BINARY)" > OPENIPMI_CONF_OPTS = \ > - --with-execinfo=no \ > --with-glib=no \ > --with-tcl=no \ > --with-perl=no \ > @@ -26,6 +25,11 @@ ifeq ($(BR2_PACKAGE_GDBM),y) > OPENIPMI_DEPENDENCIES += gdbm > endif > > +ifeq ($(BR2_PACKAGE_LIBEXECINFO),y) > +OPENIPMI_DEPENDENCIES += libexecinfo > +OPENIPMI_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -lexecinfo" > +endif > + > ifeq ($(BR2_PACKAGE_OPENSSL),y) > OPENIPMI_DEPENDENCIES += openssl > OPENIPMI_CONF_OPTS += --with-openssl=yes > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:21:08 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:21:08 +0100 Subject: [Buildroot] [git commit] package/bdwgc: bump to version 8.2.2 Message-ID: <20221030182257.89B45875B1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d7619682552dd34f499e9f17b0234af53da743ec branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The license in file README.QUICK remains unchanged, but for the copyright years, some C++ instructions changes, iand a few small typos/fixes. Signed-off-by: Pedro Aguilar [yann.morin.1998 at free.fr: mention copyright years change] Signed-off-by: Yann E. MORIN --- package/bdwgc/bdwgc.hash | 4 ++-- package/bdwgc/bdwgc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash index 4276939083..917089da08 100644 --- a/package/bdwgc/bdwgc.hash +++ b/package/bdwgc/bdwgc.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk index cefa975998..e776fb7458 100644 --- a/package/bdwgc/bdwgc.mk +++ b/package/bdwgc/bdwgc.mk @@ -4,7 +4,7 @@ # ################################################################################ -BDWGC_VERSION = 8.0.6 +BDWGC_VERSION = 8.2.2 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) BDWGC_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Sun Oct 30 18:23:27 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:23:27 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/bdwgc: bump to version 8.2.2 In-Reply-To: <20221030172639.199134-1-paguilar@paguilar.org> References: <20221030172639.199134-1-paguilar@paguilar.org> Message-ID: <20221030182327.GY1058960@scaer> Pedro, All, On 2022-10-30 18:26 +0100, Pedro Aguilar spake thusly: > The license in file README.QUICK remains unchanged, but some > C++ instructions change along with a few small typos/fixes. ... and the copyright years too, so I added that to the list, and applied to master, thanks. Regards, Yann E. MORIN. > Signed-off-by: Pedro Aguilar > --- > Changes v1 -> v2: > - Update license file hash (pointed out by Yann) > > --- > package/bdwgc/bdwgc.hash | 4 ++-- > package/bdwgc/bdwgc.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/bdwgc/bdwgc.hash b/package/bdwgc/bdwgc.hash > index 4276939083..917089da08 100644 > --- a/package/bdwgc/bdwgc.hash > +++ b/package/bdwgc/bdwgc.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 3b4914abc9fa76593596773e4da671d7ed4d5390e3d46fbf2e5f155e121bea11 gc-8.0.6.tar.gz > -sha256 0aab7a56a92ed878c4a5464cf282d65f38bcdee64fe9cf213e26254bddb3f340 README.QUICK > +sha256 f30107bcb062e0920a790ffffa56d9512348546859364c23a14be264b38836a0 gc-8.2.2.tar.gz > +sha256 a9b077aeb4e9e1aaf9742119d8023ef26f52f445cdc3f60d390bf59e1647f54a README.QUICK > diff --git a/package/bdwgc/bdwgc.mk b/package/bdwgc/bdwgc.mk > index cefa975998..e776fb7458 100644 > --- a/package/bdwgc/bdwgc.mk > +++ b/package/bdwgc/bdwgc.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BDWGC_VERSION = 8.0.6 > +BDWGC_VERSION = 8.2.2 > BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz > BDWGC_SITE = https://github.com/ivmai/bdwgc/releases/download/v$(BDWGC_VERSION) > BDWGC_INSTALL_STAGING = YES > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:33:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:33:38 +0100 Subject: [Buildroot] [git commit] package/libcurl: fix crypto backend selection Message-ID: <20221030183358.0682C875B0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=f39810149ebe4041c77ca02560c58c93328de723 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since version 7.77 --with-ssl that used to select OpenSSL renamed to --with-openssl. --without-ssl changed to mean no crypto backend. Only in version 7.86 setting both --without-ssl and some other crypto parameter became a hard configure error. Update OpenSSL selection parameter, and add --without-ssl explicitly for the case of no selected crypto backend. Fixes: http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ Cc: Matt Weber Signed-off-by: Baruch Siach Signed-off-by: Yann E. MORIN --- package/libcurl/libcurl.mk | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk index 3c3ad082fc..8de4358107 100644 --- a/package/libcurl/libcurl.mk +++ b/package/libcurl/libcurl.mk @@ -50,6 +50,10 @@ endif LIBCURL_CONFIG_SCRIPTS = curl-config +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) +LIBCURL_CONF_OPTS += --without-ssl +endif + ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) LIBCURL_DEPENDENCIES += openssl # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs # are found first. LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ --with-ca-path=/etc/ssl/certs else -LIBCURL_CONF_OPTS += --without-ssl +LIBCURL_CONF_OPTS += --without-openssl endif ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) From yann.morin.1998 at free.fr Sun Oct 30 18:32:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:32:28 +0100 Subject: [Buildroot] [git commit] package/batman-adv: bump to version 2022.2 Message-ID: <20221030183357.F1745875BF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=50da16cf949596ee450e8c3c20cc676a3baabc9a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This bump will fix the following build failure with kernel >= 5.18 thanks to https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ???batadv_bla_send_claim???: /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ???netif_rx_any_context??? [-Werror=implicit-function-declaration] 446 | netif_rx_any_context(skb); | ^~~~~~~~~~~~~~~~~~~~ Indeed, netif_rx_any_context has been dropped since kernel 5.18: https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst Fixes: - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/batman-adv/batman-adv.hash | 6 +++--- package/batman-adv/batman-adv.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash index c098663739..c5add4cdea 100644 --- a/package/batman-adv/batman-adv.hash +++ b/package/batman-adv/batman-adv.hash @@ -1,7 +1,7 @@ -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz # Hash for license files -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk index 6a1aaa699c..d279694bf5 100644 --- a/package/batman-adv/batman-adv.mk +++ b/package/batman-adv/batman-adv.mk @@ -4,7 +4,7 @@ # ################################################################################ -BATMAN_ADV_VERSION = 2021.4 +BATMAN_ADV_VERSION = 2022.2 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT From yann.morin.1998 at free.fr Sun Oct 30 18:34:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:34:07 +0100 Subject: [Buildroot] [PATCH] package/libcurl: fix crypto backend selection In-Reply-To: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> References: <7568ca93d2d360efc2c6096406b8d9af533dec86.1667154015.git.baruch@tkos.co.il> Message-ID: <20221030183407.GZ1058960@scaer> Baruch, All, On 2022-10-30 20:20 +0200, Baruch Siach via buildroot spake thusly: > Since version 7.77 --with-ssl that used to select OpenSSL renamed to > --with-openssl. --without-ssl changed to mean no crypto backend. > > Only in version 7.86 setting both --without-ssl and some other crypto > parameter became a hard configure error. > > Update OpenSSL selection parameter, and add --without-ssl explicitly for > the case of no selected crypto backend. > > Fixes: > http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5/ > http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711/ > http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626/ > > Cc: Matt Weber > Signed-off-by: Baruch Siach Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libcurl/libcurl.mk | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk > index 3c3ad082fc65..8de43581073d 100644 > --- a/package/libcurl/libcurl.mk > +++ b/package/libcurl/libcurl.mk > @@ -50,6 +50,10 @@ endif > > LIBCURL_CONFIG_SCRIPTS = curl-config > > +ifeq ($(BR2_PACKAGE_LIBCURL_TLS_NONE),y) > +LIBCURL_CONF_OPTS += --without-ssl > +endif > + > ifeq ($(BR2_PACKAGE_LIBCURL_OPENSSL),y) > LIBCURL_DEPENDENCIES += openssl > # configure adds the cross openssl dir to LD_LIBRARY_PATH which screws up > @@ -57,10 +61,10 @@ LIBCURL_DEPENDENCIES += openssl > # Fix it by setting LD_LIBRARY_PATH to something sensible so those libs > # are found first. > LIBCURL_CONF_ENV += LD_LIBRARY_PATH=$(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):)/lib:/usr/lib > -LIBCURL_CONF_OPTS += --with-ssl=$(STAGING_DIR)/usr \ > +LIBCURL_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr \ > --with-ca-path=/etc/ssl/certs > else > -LIBCURL_CONF_OPTS += --without-ssl > +LIBCURL_CONF_OPTS += --without-openssl > endif > > ifeq ($(BR2_PACKAGE_LIBCURL_BEARSSL),y) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 18:34:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 19:34:22 +0100 Subject: [Buildroot] [PATCH 1/1] package/batman-adv: bump to version 2022.2 In-Reply-To: <20221030182027.186259-1-fontaine.fabrice@gmail.com> References: <20221030182027.186259-1-fontaine.fabrice@gmail.com> Message-ID: <20221030183422.GA1058960@scaer> Fabrice, All, On 2022-10-30 19:20 +0100, Fabrice Fontaine spake thusly: > This bump will fix the following build failure with kernel >= 5.18 thanks to > https://github.com/open-mesh-mirror/batman-adv/commit/f07a0c37ab278fb6a9e95cad89429b1282f1ab59: > > /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c: In function ?batadv_bla_send_claim?: > /home/buildroot/autobuild/instance-2/output-1/build/batman-adv-2021.4/net/batman-adv/bridge_loop_avoidance.c:446:9: error: implicit declaration of function ?netif_rx_any_context? [-Werror=implicit-function-declaration] > 446 | netif_rx_any_context(skb); > | ^~~~~~~~~~~~~~~~~~~~ > > Indeed, netif_rx_any_context has been dropped since kernel 5.18: > https://github.com/torvalds/linux/commit/2655926aea9beea62c9ba80c032485456fd848f0 > > https://github.com/open-mesh-mirror/batman-adv/blob/v2022.2/CHANGELOG.rst > > Fixes: > - http://autobuild.buildroot.org/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/batman-adv/batman-adv.hash | 6 +++--- > package/batman-adv/batman-adv.mk | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/batman-adv/batman-adv.hash b/package/batman-adv/batman-adv.hash > index c098663739..c5add4cdea 100644 > --- a/package/batman-adv/batman-adv.hash > +++ b/package/batman-adv/batman-adv.hash > @@ -1,7 +1,7 @@ > -# From https://downloads.open-mesh.org/batman/releases/batman-adv-2021.4/batman-adv-2021.4.tar.gz.sha1 > -sha1 80a3e4d763b6bf35db6e561ed9d6775dc874d7c6 batman-adv-2021.4.tar.gz > +# From https://downloads.open-mesh.org/batman/releases/batman-adv-2022.2/batman-adv-2022.2.tar.gz.sha1 > +sha1 e1829e10fc37ea674a20cb9ba1d6c1483042fbfa batman-adv-2022.2.tar.gz > > # Hash for license files > -sha256 cff7a2f160045fd0dbf1f1cd7e35e93bf489e81cb8b9501b3756daa391f3eb1b batman-adv-2021.4.tar.gz > +sha256 8aca27c6f168b137a7ed7031d58169396c1a97f958c2ea95b9c30a9b92576fe0 batman-adv-2022.2.tar.gz > sha256 cecbf53d1148e13256ac29f8b900655b7fc8dc12d59939a95bc2323ea1747025 LICENSES/preferred/GPL-2.0 > sha256 323c587d0ccf10e376f8bf9a7f31fb4ca6078105194b42e0b1e0ee2bc9bde71f LICENSES/preferred/MIT > diff --git a/package/batman-adv/batman-adv.mk b/package/batman-adv/batman-adv.mk > index 6a1aaa699c..d279694bf5 100644 > --- a/package/batman-adv/batman-adv.mk > +++ b/package/batman-adv/batman-adv.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -BATMAN_ADV_VERSION = 2021.4 > +BATMAN_ADV_VERSION = 2022.2 > BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv > BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h) > BATMAN_ADV_LICENSE_FILES = LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From james.hilliard1 at gmail.com Sun Oct 30 18:53:59 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 14:53:59 -0400 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles In-Reply-To: <20221030164840.BABD7875A8@busybox.osuosl.org> References: <20221030164840.BABD7875A8@busybox.osuosl.org> Message-ID: On Sun, Oct 30, 2022 at 12:48 PM Yann E. MORIN wrote: > > commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > > Force cmake packages to use the "Unix Makefiles" generator > in case CMAKE_GENERATOR is set in the host environment. This > patch further isolates the buildroot build environment from > the host. All autobuilders appear to have broken due to this commit: http://autobuild.buildroot.net/results/b0c/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9/build-end.log Error seems to be: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Looks like MakeFiles is spelled wrong. > > Signed-off-by: Woodrow Douglass > Signed-off-by: Yann E. MORIN > --- > package/pkg-cmake.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index 081960b5bf..db9fdebb8d 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > + -G"Unix MakeFiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot From james.hilliard1 at gmail.com Sun Oct 30 19:00:28 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 13:00:28 -0600 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: MakeFiles -> Makefiles Message-ID: <20221030190028.3632333-1-james.hilliard1@gmail.com> Fixes: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Signed-off-by: James Hilliard --- package/pkg-cmake.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index db9fdebb8d..8c375779cb 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 30 19:01:22 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 15:01:22 -0400 Subject: [Buildroot] [git commit] Force cmake packages to use makefiles In-Reply-To: References: <20221030164840.BABD7875A8@busybox.osuosl.org> Message-ID: On Sun, Oct 30, 2022 at 2:53 PM James Hilliard wrote: > > On Sun, Oct 30, 2022 at 12:48 PM Yann E. MORIN wrote: > > > > commit: https://git.buildroot.net/buildroot/commit/?id=a5d8582e37b8b7440a71d4cad68e85bebc4aec6c > > branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master > > > > Force cmake packages to use the "Unix Makefiles" generator > > in case CMAKE_GENERATOR is set in the host environment. This > > patch further isolates the buildroot build environment from > > the host. > > All autobuilders appear to have broken due to this commit: > http://autobuild.buildroot.net/results/b0c/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9/build-end.log > > Error seems to be: > CMake Error: Could not create named generator Unix MakeFiles > > Generators > Green Hills MULTI = Generates Green Hills MULTI files > (experimental, work-in-progress). > * Unix Makefiles = Generates standard UNIX makefiles. > Ninja = Generates build.ninja files. > Ninja Multi-Config = Generates build-.ninja files. > Watcom WMake = Generates Watcom WMake makefiles. > CodeBlocks - Ninja = Generates CodeBlocks project files. > CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. > CodeLite - Ninja = Generates CodeLite project files. > CodeLite - Unix Makefiles = Generates CodeLite project files. > Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. > Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. > Kate - Ninja = Generates Kate project files. > Kate - Unix Makefiles = Generates Kate project files. > Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. > Sublime Text 2 - Unix Makefiles > = Generates Sublime Text 2 project files. > > Looks like MakeFiles is spelled wrong. This should fix it: https://patchwork.ozlabs.org/project/buildroot/patch/20221030190028.3632333-1-james.hilliard1 at gmail.com/ > > > > > Signed-off-by: Woodrow Douglass > > Signed-off-by: Yann E. MORIN > > --- > > package/pkg-cmake.mk | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > > index 081960b5bf..db9fdebb8d 100644 > > --- a/package/pkg-cmake.mk > > +++ b/package/pkg-cmake.mk > > @@ -88,6 +88,7 @@ define $(2)_CONFIGURE_CMDS > > rm -f CMakeCache.txt && \ > > PATH=$$(BR_PATH) \ > > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > > + -G"Unix MakeFiles" \ > > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > > -DCMAKE_INSTALL_PREFIX="/usr" \ > > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > > @@ -118,6 +119,7 @@ define $(2)_CONFIGURE_CMDS > > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > > + -G"Unix MakeFiles" \ > > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot From yann.morin.1998 at free.fr Sun Oct 30 19:18:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:18:34 +0100 Subject: [Buildroot] [git commit] package/pkg-cmake.mk: MakeFiles -> Makefiles Message-ID: <20221030191845.74216875C3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68b68518a8cc372cd6bfb34414a91311e7266044 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Fixes: CMake Error: Could not create named generator Unix MakeFiles Generators Green Hills MULTI = Generates Green Hills MULTI files (experimental, work-in-progress). * Unix Makefiles = Generates standard UNIX makefiles. Ninja = Generates build.ninja files. Ninja Multi-Config = Generates build-.ninja files. Watcom WMake = Generates Watcom WMake makefiles. CodeBlocks - Ninja = Generates CodeBlocks project files. CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. CodeLite - Ninja = Generates CodeLite project files. CodeLite - Unix Makefiles = Generates CodeLite project files. Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. Kate - Ninja = Generates Kate project files. Kate - Unix Makefiles = Generates Kate project files. Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. Sublime Text 2 - Unix Makefiles = Generates Sublime Text 2 project files. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/pkg-cmake.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk index db9fdebb8d..8c375779cb 100644 --- a/package/pkg-cmake.mk +++ b/package/pkg-cmake.mk @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS rm -f CMakeCache.txt && \ PATH=$$(BR_PATH) \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ -DCMAKE_INSTALL_PREFIX="/usr" \ -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ - -G"Unix MakeFiles" \ + -G"Unix Makefiles" \ -DCMAKE_INSTALL_SO_NO_EXE=0 \ -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ From yann.morin.1998 at free.fr Sun Oct 30 19:19:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:19:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/pkg-cmake.mk: MakeFiles -> Makefiles In-Reply-To: <20221030190028.3632333-1-james.hilliard1@gmail.com> References: <20221030190028.3632333-1-james.hilliard1@gmail.com> Message-ID: <20221030191907.GB1058960@scaer> James, All, On 2022-10-30 13:00 -0600, James Hilliard spake thusly: > Fixes: > CMake Error: Could not create named generator Unix MakeFiles > > Generators > Green Hills MULTI = Generates Green Hills MULTI files > (experimental, work-in-progress). > * Unix Makefiles = Generates standard UNIX makefiles. > Ninja = Generates build.ninja files. > Ninja Multi-Config = Generates build-.ninja files. > Watcom WMake = Generates Watcom WMake makefiles. > CodeBlocks - Ninja = Generates CodeBlocks project files. > CodeBlocks - Unix Makefiles = Generates CodeBlocks project files. > CodeLite - Ninja = Generates CodeLite project files. > CodeLite - Unix Makefiles = Generates CodeLite project files. > Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files. > Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files. > Kate - Ninja = Generates Kate project files. > Kate - Unix Makefiles = Generates Kate project files. > Sublime Text 2 - Ninja = Generates Sublime Text 2 project files. > Sublime Text 2 - Unix Makefiles > = Generates Sublime Text 2 project files. > > Signed-off-by: James Hilliard Good catch, thanks! Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/pkg-cmake.mk | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk > index db9fdebb8d..8c375779cb 100644 > --- a/package/pkg-cmake.mk > +++ b/package/pkg-cmake.mk > @@ -88,7 +88,7 @@ define $(2)_CONFIGURE_CMDS > rm -f CMakeCache.txt && \ > PATH=$$(BR_PATH) \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > - -G"Unix MakeFiles" \ > + -G"Unix Makefiles" \ > -DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \ > -DCMAKE_INSTALL_PREFIX="/usr" \ > -DCMAKE_INSTALL_RUNSTATEDIR="/run" \ > @@ -119,7 +119,7 @@ define $(2)_CONFIGURE_CMDS > PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ > PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ > $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \ > - -G"Unix MakeFiles" \ > + -G"Unix Makefiles" \ > -DCMAKE_INSTALL_SO_NO_EXE=0 \ > -DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \ > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \ > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:22:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:22:13 +0100 Subject: [Buildroot] [git commit] package/tinycompress: new package Message-ID: <20221030192451.8F07D875D0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2f02d159bb9eceabc1d0a3a4ffee97e726aad21d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master tinycompress is a library for compress audio offload in alsa. It also contains the "cplay" and "crecord" programs. tinycompress is part of the ALSA project. https://www.alsa-project.org/ Signed-off-by: Julien Olivain Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/Config.in | 1 + ...-wave-add-time.h-missing-header-inclusion.patch | 39 ++++++++++++++++++++++ package/tinycompress/Config.in | 10 ++++++ package/tinycompress/tinycompress.hash | 5 +++ package/tinycompress/tinycompress.mk | 13 ++++++++ 6 files changed, 69 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c4d23cd293..46c2820c4e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1685,6 +1685,7 @@ F: package/python-distro/ F: package/python-gnupg/ F: package/python-pyalsa/ F: package/riscv-isa-sim/ +F: package/tinycompress/ F: package/zynaddsubfx/ F: support/testing/tests/package/sample_python_distro.py F: support/testing/tests/package/sample_python_gnupg.py diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..d691471877 100644 --- a/package/Config.in +++ b/package/Config.in @@ -52,6 +52,7 @@ menu "Audio and video applications" source "package/pulseaudio/Config.in" source "package/sox/Config.in" source "package/squeezelite/Config.in" + source "package/tinycompress/Config.in" source "package/tovid/Config.in" source "package/tstools/Config.in" source "package/twolame/Config.in" diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch new file mode 100644 index 0000000000..4068a54074 --- /dev/null +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch @@ -0,0 +1,39 @@ +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 +From: Julien Olivain +Date: Sat, 29 Oct 2022 12:51:17 +0200 +Subject: [PATCH] wave: add missing header inclusion + +When compiling tinycompress with some libc other than glibc +(e.g. musl libc), compilation fails with the following error: + + In file included from wave.c:11:0: + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ + [...] + +According to POSIX, "struct timespec" is defined in . See: +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html + +This patch fixes this build failure by including prior +. + +Signed-off-by: Julien Olivain +--- + src/utils/wave.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/utils/wave.c b/src/utils/wave.c +index a74149a..d17f66a 100644 +--- a/src/utils/wave.c ++++ b/src/utils/wave.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + + #include "tinycompress/tinywave.h" +-- +2.38.1 + diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in new file mode 100644 index 0000000000..aff1943c78 --- /dev/null +++ b/package/tinycompress/Config.in @@ -0,0 +1,10 @@ +config BR2_PACKAGE_TINYCOMPRESS + bool "tinycompress" + depends on !BR2_STATIC_LIBS # dlfcn.h + help + tinycompress is a library for compress audio offload in alsa. + + https://www.alsa-project.org/ + +comment "tinycompress needs a toolchain w/ dynamic library" + depends on BR2_STATIC_LIBS diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash new file mode 100644 index 0000000000..164f3a36c3 --- /dev/null +++ b/package/tinycompress/tinycompress.hash @@ -0,0 +1,5 @@ +# Locally calculated after checking pgp signature +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 + +# Locally calculated +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk new file mode 100644 index 0000000000..062233ec80 --- /dev/null +++ b/package/tinycompress/tinycompress.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# tinycompress +# +################################################################################ + +TINYCOMPRESS_VERSION = 1.2.8 +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 +TINYCOMPRESS_LICENSE_FILES = COPYING + +$(eval $(autotools-package)) From yann.morin.1998 at free.fr Sun Oct 30 19:25:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:25:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/tinycompress: new package In-Reply-To: <20221029115321.718694-1-ju.o@free.fr> References: <20221029115321.718694-1-ju.o@free.fr> Message-ID: <20221030192557.GC1058960@scaer> Julien, All, On 2022-10-29 13:53 +0200, Julien Olivain spake thusly: > tinycompress is a library for compress audio offload in alsa. > It also contains the "cplay" and "crecord" programs. > tinycompress is part of the ALSA project. And bizarrely enough, it does not depend on alsa-lib. Except for a tool, fcplay, that is disabled by default. > https://www.alsa-project.org/ > > Signed-off-by: Julien Olivain Applied to master, thanks. Regards, Yann E. MORIN. > --- > Tested on master branch, commit 014ec19 with commands: > > make check-package > ... > 0 warnings generated > > ./utils/test-pkg -a -p tinycompress > ... > 44 builds, 3 skipped, 1 build failed, 0 legal-info failed, 0 show-info failed > > Note: > The build failure is not related to this package. It is related to the > toolchain "bootlin-xtensa-uclibc" for which a fix was proposed in: > https://patchwork.ozlabs.org/project/buildroot/patch/20221010030937.6432-1-ju.o at free.fr/ > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > ...-add-time.h-missing-header-inclusion.patch | 39 +++++++++++++++++++ > package/tinycompress/Config.in | 10 +++++ > package/tinycompress/tinycompress.hash | 5 +++ > package/tinycompress/tinycompress.mk | 13 +++++++ > 6 files changed, 69 insertions(+) > create mode 100644 package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > create mode 100644 package/tinycompress/Config.in > create mode 100644 package/tinycompress/tinycompress.hash > create mode 100644 package/tinycompress/tinycompress.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index dac8fefd0b..df6b3f7b42 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1684,6 +1684,7 @@ F: package/python-distro/ > F: package/python-gnupg/ > F: package/python-pyalsa/ > F: package/riscv-isa-sim/ > +F: package/tinycompress/ > F: package/zynaddsubfx/ > F: support/testing/tests/package/sample_python_distro.py > F: support/testing/tests/package/sample_python_gnupg.py > diff --git a/package/Config.in b/package/Config.in > index e4eb2b7434..d691471877 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -52,6 +52,7 @@ menu "Audio and video applications" > source "package/pulseaudio/Config.in" > source "package/sox/Config.in" > source "package/squeezelite/Config.in" > + source "package/tinycompress/Config.in" > source "package/tovid/Config.in" > source "package/tstools/Config.in" > source "package/twolame/Config.in" > diff --git a/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > new file mode 100644 > index 0000000000..4068a54074 > --- /dev/null > +++ b/package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch > @@ -0,0 +1,39 @@ > +From 7d3b8ac47789545af5a4cd2fc1cf9bcfb91ae3b0 Mon Sep 17 00:00:00 2001 > +From: Julien Olivain > +Date: Sat, 29 Oct 2022 12:51:17 +0200 > +Subject: [PATCH] wave: add missing header inclusion > + > +When compiling tinycompress with some libc other than glibc > +(e.g. musl libc), compilation fails with the following error: > + > + In file included from wave.c:11:0: > + /path/to/gcc/sysroot/usr/include/sound/asound.h:404:18: error: field 'trigger_tstamp' has incomplete type > + struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */ > + [...] > + > +According to POSIX, "struct timespec" is defined in . See: > +https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/time.h.html > + > +This patch fixes this build failure by including prior > +. > + > +Signed-off-by: Julien Olivain > +--- > + src/utils/wave.c | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/src/utils/wave.c b/src/utils/wave.c > +index a74149a..d17f66a 100644 > +--- a/src/utils/wave.c > ++++ b/src/utils/wave.c > +@@ -8,6 +8,7 @@ > + #include > + #include > + #include > ++#include > + #include > + > + #include "tinycompress/tinywave.h" > +-- > +2.38.1 > + > diff --git a/package/tinycompress/Config.in b/package/tinycompress/Config.in > new file mode 100644 > index 0000000000..aff1943c78 > --- /dev/null > +++ b/package/tinycompress/Config.in > @@ -0,0 +1,10 @@ > +config BR2_PACKAGE_TINYCOMPRESS > + bool "tinycompress" > + depends on !BR2_STATIC_LIBS # dlfcn.h > + help > + tinycompress is a library for compress audio offload in alsa. > + > + https://www.alsa-project.org/ > + > +comment "tinycompress needs a toolchain w/ dynamic library" > + depends on BR2_STATIC_LIBS > diff --git a/package/tinycompress/tinycompress.hash b/package/tinycompress/tinycompress.hash > new file mode 100644 > index 0000000000..164f3a36c3 > --- /dev/null > +++ b/package/tinycompress/tinycompress.hash > @@ -0,0 +1,5 @@ > +# Locally calculated after checking pgp signature > +sha256 2f897e5112cd3bca6790b5cecfda6e0662c8bc5ee0fbab972b247a0cc620d66c tinycompress-1.2.8.tar.bz2 > + > +# Locally calculated > +sha256 912ea37a4435594a3b3c35f04efa4b5b7af2e68a05f5319c16c881711a31e4b7 COPYING > diff --git a/package/tinycompress/tinycompress.mk b/package/tinycompress/tinycompress.mk > new file mode 100644 > index 0000000000..062233ec80 > --- /dev/null > +++ b/package/tinycompress/tinycompress.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# tinycompress > +# > +################################################################################ > + > +TINYCOMPRESS_VERSION = 1.2.8 > +TINYCOMPRESS_SOURCE = tinycompress-$(TINYCOMPRESS_VERSION).tar.bz2 > +TINYCOMPRESS_SITE = https://www.alsa-project.org/files/pub/tinycompress > +TINYCOMPRESS_LICENSE = BSD-3-Clause and LGPL-2.1 > +TINYCOMPRESS_LICENSE_FILES = COPYING > + > +$(eval $(autotools-package)) > -- > 2.38.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:31:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:31:41 +0100 Subject: [Buildroot] [git commit] package/binutils: prevent selecting 2.37 for AVX512 systems Message-ID: <20221030193151.CA537875DD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=a904fb2ac4b42386206fe9d86b2570442ab8540b branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Support for the AVX512FP16 instructions was added in binutils 2.38. See the binutils 2.38 releases notes [0] that state: X86: [...] * Add support for Intel AVX512_FP16 instructions. [0] https://sourceware.org/pipermail/binutils/2022-February/119721.html It turns out that when building GCC 12.x, some of these AVX512FP16 instructions are now used, and therefore when binutils < 2.38 is used, the build fails as the assembler does not recognize those instructions: /tmp/ccChzL2g.s: Assembler messages: /tmp/ccChzL2g.s:20: Error: no such instruction: `vmovw 24(%esp),%xmm2' /tmp/ccChzL2g.s:21: Error: no such instruction: `vmovw 28(%esp),%xmm3' /tmp/ccChzL2g.s:22: Error: no such instruction: `vmovw 32(%esp),%xmm4' /tmp/ccChzL2g.s:23: Error: no such instruction: `vmovw 36(%esp),%xmm5' /tmp/ccChzL2g.s:30: Error: no such instruction: `vcvtsh2ss %xmm2,%xmm6,%xmm6' /tmp/ccChzL2g.s:36: Error: no such instruction: `vcvtsh2ss %xmm3,%xmm6,%xmm6' /tmp/ccChzL2g.s:42: Error: no such instruction: `vcvtsh2ss %xmm4,%xmm7,%xmm7' /tmp/ccChzL2g.s:48: Error: no such instruction: `vcvtsh2ss %xmm5,%xmm1,%xmm1' /tmp/ccChzL2g.s:80: Error: no such instruction: `vcvtss2sh (%esp),%xmm1,%xmm1' /tmp/ccChzL2g.s:96: Error: no such instruction: `vcvtss2sh (%esp),%xmm0,%xmm0' /tmp/ccChzL2g.s:100: Error: no such instruction: `vucomish %xmm1,%xmm1' /tmp/ccChzL2g.s:103: Error: no such instruction: `vucomish %xmm0,%xmm0' /tmp/ccChzL2g.s:122: Error: no such instruction: `vucomish %xmm2,%xmm2' The same issue does not occur with GCC 11.x, but nothing prevents other packages than GCC to use those instructions, so the problem really lies on the binutils side missing the support for those instructions. Also, in Buildroot, we do not distinguish AVX512 in general from AVX512FP16 specifically, so our only option is to make binutils 2.37 unavailable for AVX512 systems even if some of them perhaps don't support AVX512FP16 anyway. This seems like a reasonable trade-off, as binutils 2.38 is anyway already the default in Buildroot, and AVX512-capable systems are fairly recent, and therefore using a recent binutils version should not be a problem on these platforms. Fixes: http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ Signed-off-by: Thomas Petazzoni Signed-off-by: Yann E. MORIN --- package/binutils/Config.in.host | 3 +++ 1 file changed, 3 insertions(+) diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host index 51802db043..5dd2af2f9c 100644 --- a/package/binutils/Config.in.host +++ b/package/binutils/Config.in.host @@ -14,6 +14,9 @@ choice config BR2_BINUTILS_VERSION_2_37_X bool "binutils 2.37" + # AVX512FP16 instructions were not supported before binutils + # 2.38 + depends on !BR2_X86_CPU_HAS_AVX512 config BR2_BINUTILS_VERSION_2_38_X bool "binutils 2.38" From bernd.kuhls at t-online.de Sun Oct 30 19:33:06 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:06 +0100 Subject: [Buildroot] [PATCH v2 3/4] package/alsa-lib: bump version to 1.2.8 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-3-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls --- v2: no changes package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 659ec26ba3..a0a9617514 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:33:04 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:04 +0100 Subject: [Buildroot] [PATCH v2 1/4] package/alsa-lib: topology modules need dynamic library support Message-ID: <20221030193307.1190297-1-bernd.kuhls@t-online.de> With this new option we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls --- v2: added new Config.in option (Thomas) package/alsa-lib/Config.in | 5 ++ package/alsa-lib/alsa-lib.mk | 3 ++ ...nfigure.ac-fix-build-without-dlfcn.h.patch | 48 ------------------- package/alsa-utils/alsa-utils.mk | 3 -- 4 files changed, 8 insertions(+), 51 deletions(-) delete mode 100644 package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in index af3de984d9..c6fb501d07 100644 --- a/package/alsa-lib/Config.in +++ b/package/alsa-lib/Config.in @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS bool "old-symbols" default y +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY + bool "topology" + depends on !BR2_STATIC_LIBS + default y + endif diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..659ec26ba3 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -58,6 +58,9 @@ endif ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) ALSA_LIB_CONF_OPTS += --disable-old-symbols endif +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) +ALSA_LIB_CONF_OPTS += --disable-topology +endif ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) ALSA_LIB_CONF_OPTS += \ diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 30 19:33:06 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:33:06 +0100 Subject: [Buildroot] [PATCH] package/binutils: prevent selecting 2.37 for AVX512 systems In-Reply-To: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> References: <20221026175430.3927965-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030193306.GD1058960@scaer> Thomas, All, On 2022-10-26 19:54 +0200, Thomas Petazzoni via buildroot spake thusly: > Support for the AVX512FP16 instructions was added in binutils > 2.38. See the binutils 2.38 releases notes [0] that state: > X86: > [...] > * Add support for Intel AVX512_FP16 instructions. [--SNIP--] > Also, in Buildroot, we do not distinguish AVX512 in general from > AVX512FP16 specifically, so our only option is to make binutils 2.37 > unavailable for AVX512 systems even if some of them perhaps don't > support AVX512FP16 anyway. This seems like a reasonable trade-off, as > binutils 2.38 is anyway already the default in Buildroot, and > AVX512-capable systems are fairly recent, and therefore using a recent > binutils version should not be a problem on these platforms. ACK > Fixes: > > http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/ > > Signed-off-by: Thomas Petazzoni Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/binutils/Config.in.host | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host > index 51802db043..5dd2af2f9c 100644 > --- a/package/binutils/Config.in.host > +++ b/package/binutils/Config.in.host > @@ -14,6 +14,9 @@ choice > > config BR2_BINUTILS_VERSION_2_37_X > bool "binutils 2.37" > + # AVX512FP16 instructions were not supported before binutils > + # 2.38 > + depends on !BR2_X86_CPU_HAS_AVX512 > > config BR2_BINUTILS_VERSION_2_38_X > bool "binutils 2.38" > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 30 19:33:07 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:07 +0100 Subject: [Buildroot] [PATCH v2 4/4] package/alsa-utils: bump version to 1.2.8 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-4-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 due to upstream removal of UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls --- v2: no changes ...ay-aplay.c-make-UCM-support-optional.patch | 89 ------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) delete mode 100644 package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:33:05 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:33:05 +0100 Subject: [Buildroot] [PATCH v2 2/4] package/alsa-plugins: bump version to 1.2.7.1 In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030193307.1190297-2-bernd.kuhls@t-online.de> Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls --- v2: no changes package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ -- 2.34.1 From yann.morin.1998 at free.fr Sun Oct 30 19:33:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:33:38 +0100 Subject: [Buildroot] [git commit] package/musl: fixup the dynamic loader symlink Message-ID: <20221030193716.A9F19875E6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7935e427bce601f16ee194978583e533213f78c6 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The musl Makefile installs the dynamic loader as a symlink to libc.so with the following rule: $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so $(INSTALL) -D -l $(libdir)/libc.so $@ || true While it works, the drawback is that ld-musl-.so ends up being a symlink to /lib/libc.so. While it works on the target, it means we have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as /lib/libc.so doesn't make sense on the build machine. This generally doesn't cause any problem *except* when we tell Qemu to use $(STAGING_DIR) as the library directory when running target programs through the Qemu user emulation mode. This is for example node inside the NodeJS build. Due to this broken symlink, Qemu can't find libc.so that is pointed to be the dynamic loader symlink causing this build error: qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory Since this is not really a bug in the musl build system, we address this issue by overriding the symlink to be a relative path. The dynamic loader is always installed in /lib, and libc.so is also always installed in /lib because we pass libdir=/lib when configuring musl. So we can simply have a ld-musl* -> libc.so symbolic link. We use ld-musl* as a wildcard so that we don't need to have extra logic to determine the exact name of the dynamic loader symlink, and simply override the one that exists. Fixes: http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ https://bugs.busybox.net/show_bug.cgi?id=15061 Note that, for external toolchain, we already have a generic fixup that makes symlinks relative [0]. So in the external toolchain, even if the symlink is broken, it gets fixed when we import the toolchain into STAGING_DIR. [0] https://lore.kernel.org/buildroot/20221026205312.3f729eb8 at windsurf/ Cc: hello.skyclo at gmail.com Signed-off-by: Thomas Petazzoni [yann.morin.1998 at free.fr: - add summary of Thomas' explanations for external toolchains ] Signed-off-by: Yann E. MORIN --- package/musl/musl.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/musl/musl.mk b/package/musl/musl.mk index 44c79da6f7..30c3c2fbc0 100644 --- a/package/musl/musl.mk +++ b/package/musl/musl.mk @@ -60,12 +60,14 @@ endef define MUSL_INSTALL_STAGING_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* endef define MUSL_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ DESTDIR=$(TARGET_DIR) install-libs $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* endef $(eval $(generic-package)) From yann.morin.1998 at free.fr Sun Oct 30 19:38:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:38:23 +0100 Subject: [Buildroot] [PATCH] package/musl: fixup the dynamic loader symlink In-Reply-To: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> References: <20221026125836.3910730-1-thomas.petazzoni@bootlin.com> Message-ID: <20221030193822.GE1058960@scaer> Thomas, All, On 2022-10-26 14:58 +0200, Thomas Petazzoni via buildroot spake thusly: > The musl Makefile installs the dynamic loader as a symlink to libc.so > with the following rule: > > $(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so > $(INSTALL) -D -l $(libdir)/libc.so $@ || true > > While it works, the drawback is that ld-musl-.so ends up being a > symlink to /lib/libc.so. While it works on the target, it means we > have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as > /lib/libc.so doesn't make sense on the build machine. This generally > doesn't cause any problem *except* when we tell Qemu to use > $(STAGING_DIR) as the library directory when running target programs > through the Qemu user emulation mode. This is for example node inside > the NodeJS build. Due to this broken symlink, Qemu can't find libc.so > that is pointed to be the dynamic loader symlink causing this build > error: > > qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory > > Since this is not really a bug in the musl build system, we address > this issue by overriding the symlink to be a relative path. The > dynamic loader is always installed in /lib, and libc.so is also always > installed in /lib because we pass libdir=/lib when configuring > musl. So we can simply have a ld-musl* -> libc.so symbolic link. We > use ld-musl* as a wildcard so that we don't need to have extra logic > to determine the exact name of the dynamic loader symlink, and simply > override the one that exists. > > Fixes: > > http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/ > https://bugs.busybox.net/show_bug.cgi?id=15061 > > Cc: hello.skyclo at gmail.com > Signed-off-by: Thomas Petazzoni Applied to master, after adding a summary of the explanations you provided Yann about the external toolchain case. Thanks. Regards, Yann E. MORIN. > --- > package/musl/musl.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/musl/musl.mk b/package/musl/musl.mk > index 44c79da6f7..30c3c2fbc0 100644 > --- a/package/musl/musl.mk > +++ b/package/musl/musl.mk > @@ -60,12 +60,14 @@ endef > define MUSL_INSTALL_STAGING_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(STAGING_DIR) install-libs install-tools install-headers > + ln -sf libc.so $(STAGING_DIR)/lib/ld-musl* > endef > > define MUSL_INSTALL_TARGET_CMDS > $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ > DESTDIR=$(TARGET_DIR) install-libs > $(RM) $(addprefix $(TARGET_DIR)/lib/,crt1.o crtn.o crti.o rcrt1.o Scrt1.o) > + ln -sf libc.so $(TARGET_DIR)/lib/ld-musl* > endef > > $(eval $(generic-package)) > -- > 2.37.3 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Sun Oct 30 19:40:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:19 +0100 Subject: [Buildroot] [git commit] package/alsa-plugins: bump version to 1.2.7.1 Message-ID: <20221030194324.C4DA187605@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9597126a3d83ddf7871688ac4de5d2e065c508f0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7_v1.2.7.1#alsa-plugins Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-plugins/alsa-plugins.hash | 2 +- package/alsa-plugins/alsa-plugins.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-plugins/alsa-plugins.hash b/package/alsa-plugins/alsa-plugins.hash index 2582a0d639..5d190e4d7b 100644 --- a/package/alsa-plugins/alsa-plugins.hash +++ b/package/alsa-plugins/alsa-plugins.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 068818a4b55d8c029daa00015d853d45113f56b224b7c64e1e117988c825b2a0 alsa-plugins-1.2.6.tar.bz2 +sha256 8c337814954bb7c167456733a6046142a2931f12eccba3ec2a4ae618a3432511 alsa-plugins-1.2.7.1.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING.GPL diff --git a/package/alsa-plugins/alsa-plugins.mk b/package/alsa-plugins/alsa-plugins.mk index b8819151ef..5728ebfe37 100644 --- a/package/alsa-plugins/alsa-plugins.mk +++ b/package/alsa-plugins/alsa-plugins.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_PLUGINS_VERSION = 1.2.6 +ALSA_PLUGINS_VERSION = 1.2.7.1 ALSA_PLUGINS_SOURCE = alsa-plugins-$(ALSA_PLUGINS_VERSION).tar.bz2 ALSA_PLUGINS_SITE = https://www.alsa-project.org/files/pub/plugins ALSA_PLUGINS_LICENSE = LGPL-2.1+ From yann.morin.1998 at free.fr Sun Oct 30 19:40:21 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:21 +0100 Subject: [Buildroot] [git commit] package/alsa-lib: bump version to 1.2.8 Message-ID: <20221030194324.CEC3787607@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9b97b3e3bcdc5a099fdaef84ce1d131dbe6a3e79 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-lib Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-lib/alsa-lib.hash | 2 +- package/alsa-lib/alsa-lib.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/alsa-lib/alsa-lib.hash b/package/alsa-lib/alsa-lib.hash index 651591a5ee..898cbcd60d 100644 --- a/package/alsa-lib/alsa-lib.hash +++ b/package/alsa-lib/alsa-lib.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 8a35b7218e50f2a2c79342d0de98ded81439ce19e12809385ec9be9596de7c2f alsa-lib-1.2.7.2.tar.bz2 +sha256 1ab01b74e33425ca99c2e36c0844fd6888273193bd898240fe8f93accbcbf347 alsa-lib-1.2.8.tar.bz2 sha256 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b COPYING sha256 bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced aserver/COPYING diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index 659ec26ba3..a0a9617514 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_LIB_VERSION = 1.2.7.2 +ALSA_LIB_VERSION = 1.2.8 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2 ALSA_LIB_SITE = https://www.alsa-project.org/files/pub/lib ALSA_LIB_LICENSE = LGPL-2.1+ (library), GPL-2.0+ (aserver) From yann.morin.1998 at free.fr Sun Oct 30 19:40:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:40:23 +0100 Subject: [Buildroot] [git commit] package/alsa-utils: bump version to 1.2.8 Message-ID: <20221030194324.D8AE387608@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6c967d184d116a6eae9243e718b19e904582a686 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8#alsa-utils Removed patch 0002 due to upstream removal of UCM code: https://github.com/alsa-project/alsa-utils/commit/62cd05a929283d919144e092892c74ac85b00a7d Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- ...2-aplay-aplay.c-make-UCM-support-optional.patch | 89 ---------------------- package/alsa-utils/alsa-utils.hash | 2 +- package/alsa-utils/alsa-utils.mk | 2 +- 3 files changed, 2 insertions(+), 91 deletions(-) diff --git a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch b/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch deleted file mode 100644 index 0d58ae81a4..0000000000 --- a/package/alsa-utils/0002-aplay-aplay.c-make-UCM-support-optional.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 1921efacfe1a230021849b83b2877c8f239b44ab Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Sun, 17 Jul 2022 19:09:04 +0200 -Subject: [PATCH] aplay/aplay.c: make UCM support optional - -Commit 90f59671784a7e47b40485095cd66892d4840ed7 ("topology: -pre-processor: Move the call to expand variables") modified aplay by -unconditionally invoking features of the use case manager (UCM) from -alsa-lib. However, alsa-lib can be compiled without UCM support. - -In order to properly support this situation, this commit changes aplay -to only conditionally compile the UCM related code. - -Signed-off-by: Thomas Petazzoni -Upstream: https://mailman.alsa-project.org/pipermail/alsa-devel/2022-July/203847.html ---- - aplay/aplay.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/aplay/aplay.c b/aplay/aplay.c -index b3b3635..59f937d 100644 ---- a/aplay/aplay.c -+++ b/aplay/aplay.c -@@ -41,7 +41,9 @@ - #include - #include - #include -+#ifdef HAVE_ALSA_USE_CASE_H - #include -+#endif - #include - #include - #include -@@ -453,6 +455,7 @@ static ssize_t xwrite(int fd, const void *buf, size_t count) - return offset; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *name) - { - char *s, *p; -@@ -476,6 +479,7 @@ static int open_ucm(snd_use_case_mgr_t **uc_mgr, char **pcm_name, const char *na - } - return err; - } -+#endif - - static long parse_long(const char *str, int *err) - { -@@ -553,7 +557,9 @@ int main(int argc, char *argv[]) - int do_device_list = 0, do_pcm_list = 0, force_sample_format = 0; - snd_pcm_info_t *info; - FILE *direction; -+#ifdef HAVE_ALSA_USE_CASE_H - snd_use_case_mgr_t *uc_mgr = NULL; -+#endif - - #ifdef ENABLE_NLS - setlocale(LC_ALL, ""); -@@ -852,6 +858,7 @@ int main(int argc, char *argv[]) - goto __end; - } - -+#ifdef HAVE_ALSA_USE_CASE_H - if (strncmp(pcm_name, "ucm.", 4) == 0) { - err = open_ucm(&uc_mgr, &pcm_name, pcm_name + 4); - if (err < 0) { -@@ -861,6 +868,7 @@ int main(int argc, char *argv[]) - if (verbose) - fprintf(stderr, _("Found UCM PCM device: %s\n"), pcm_name); - } -+#endif - - err = snd_pcm_open(&handle, pcm_name, stream, open_mode); - if (err < 0) { -@@ -951,8 +959,10 @@ int main(int argc, char *argv[]) - if (verbose==2) - putchar('\n'); - snd_pcm_close(handle); -+#ifdef HAVE_ALSA_USE_CASE_H - if (uc_mgr) - snd_use_case_mgr_close(uc_mgr); -+#endif - handle = NULL; - free(audiobuf); - __end: --- -2.36.1 - diff --git a/package/alsa-utils/alsa-utils.hash b/package/alsa-utils/alsa-utils.hash index c53fe07963..66c04d261f 100644 --- a/package/alsa-utils/alsa-utils.hash +++ b/package/alsa-utils/alsa-utils.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e906bf2404ff04c448eaa3d226d283a62b9a283f12e4fd8457fb24bac274e678 alsa-utils-1.2.7.tar.bz2 +sha256 e140fa604c351f36bd72167c8860c69d81b964ae6ab53992d6434dde38e9333c alsa-utils-1.2.8.tar.bz2 sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c COPYING diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 65a7853c79..8c43f58b76 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -ALSA_UTILS_VERSION = 1.2.7 +ALSA_UTILS_VERSION = 1.2.8 ALSA_UTILS_SOURCE = alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2 ALSA_UTILS_SITE = https://www.alsa-project.org/files/pub/utils ALSA_UTILS_LICENSE = GPL-2.0 From yann.morin.1998 at free.fr Sun Oct 30 19:39:54 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:39:54 +0100 Subject: [Buildroot] [git commit] package/alsa-lib: topology modules need dynamic library support Message-ID: <20221030194324.BB43F87604@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=28497102e1788df3628bd3324a3304a03c7942d0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master With this new option we can remove a patch from alsa-utils which fixed its static build. A static build of topology modules is not supported by upstream however: "Note that it does not make sense to build static topology modules. They are not usable." https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/alsa-lib/Config.in | 5 +++ package/alsa-lib/alsa-lib.mk | 3 ++ ...03-configure.ac-fix-build-without-dlfcn.h.patch | 48 ---------------------- package/alsa-utils/alsa-utils.mk | 3 -- 4 files changed, 8 insertions(+), 51 deletions(-) diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in index af3de984d9..447916a29f 100644 --- a/package/alsa-lib/Config.in +++ b/package/alsa-lib/Config.in @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS bool "old-symbols" default y +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY + bool "topology" + default y + depends on !BR2_STATIC_LIBS + endif diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk index f3ed195a5c..659ec26ba3 100644 --- a/package/alsa-lib/alsa-lib.mk +++ b/package/alsa-lib/alsa-lib.mk @@ -58,6 +58,9 @@ endif ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) ALSA_LIB_CONF_OPTS += --disable-old-symbols endif +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) +ALSA_LIB_CONF_OPTS += --disable-topology +endif ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) ALSA_LIB_CONF_OPTS += \ diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch deleted file mode 100644 index 69dae5102c..0000000000 --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 -From: Fabrice Fontaine -Date: Sun, 14 Aug 2022 20:31:30 +0200 -Subject: [PATCH] configure.ac: fix build without dlfcn.h - -Fix the following static build failure (i.e. without dlfcn.h) raised -since version 1.2.7 and -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: - -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory - 28 | #include - | ^~~~~~~~~ - -Fixes: - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e - -Signed-off-by: Fabrice Fontaine -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] ---- - configure.ac | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/configure.ac b/configure.ac -index 20cbb68..6833800 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], - , [AC_ERROR([No user enum control support in alsa-lib])]) - fi - -+ -+AC_CHECK_HEADERS([dlfcn.h]) -+ - dnl Check components - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], - [#include ]) -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") - --- -2.35.1 - diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk index 1b16a2457a..65a7853c79 100644 --- a/package/alsa-utils/alsa-utils.mk +++ b/package/alsa-utils/alsa-utils.mk @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ $(TARGET_NLS_DEPENDENCIES) -# We're patching configure.ac -ALSA_UTILS_AUTORECONF = YES - ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) ALSA_UTILS_SELINUX_MODULES += alsa endif From yann.morin.1998 at free.fr Sun Oct 30 19:43:19 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 20:43:19 +0100 Subject: [Buildroot] [PATCH v2 1/4] package/alsa-lib: topology modules need dynamic library support In-Reply-To: <20221030193307.1190297-1-bernd.kuhls@t-online.de> References: <20221030193307.1190297-1-bernd.kuhls@t-online.de> Message-ID: <20221030194319.GF1058960@scaer> Bernd, All, On 2022-10-30 20:33 +0100, Bernd Kuhls spake thusly: > With this new option we can remove a patch from alsa-utils which fixed > its static build. A static build of topology modules is not supported > by upstream however: > > "Note that it does not make sense to build static topology modules. > They are not usable." > https://github.com/alsa-project/alsa-utils/issues/152#issuecomment-1144485929 > > Signed-off-by: Bernd Kuhls > --- [--SNIP--] > diff --git a/package/alsa-lib/Config.in b/package/alsa-lib/Config.in > index af3de984d9..c6fb501d07 100644 > --- a/package/alsa-lib/Config.in > +++ b/package/alsa-lib/Config.in > @@ -80,4 +80,9 @@ config BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS > bool "old-symbols" > default y > > +config BR2_PACKAGE_ALSA_LIB_TOPOLOGY > + bool "topology" > + depends on !BR2_STATIC_LIBS > + default y $ make check-package package/alsa-lib/Config.in:86: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files) Applied to master with the above fixed, thanks. Rest of the series also applied to master, thanks Regards, Yann E. MORIN. > endif > diff --git a/package/alsa-lib/alsa-lib.mk b/package/alsa-lib/alsa-lib.mk > index f3ed195a5c..659ec26ba3 100644 > --- a/package/alsa-lib/alsa-lib.mk > +++ b/package/alsa-lib/alsa-lib.mk > @@ -58,6 +58,9 @@ endif > ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y) > ALSA_LIB_CONF_OPTS += --disable-old-symbols > endif > +ifneq ($(BR2_PACKAGE_ALSA_LIB_TOPOLOGY),y) > +ALSA_LIB_CONF_OPTS += --disable-topology > +endif > > ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y) > ALSA_LIB_CONF_OPTS += \ > diff --git a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch b/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > deleted file mode 100644 > index 69dae5102c..0000000000 > --- a/package/alsa-utils/0003-configure.ac-fix-build-without-dlfcn.h.patch > +++ /dev/null > @@ -1,48 +0,0 @@ > -From 0e74339bf0751932abf6aa49bf07aa1c035f9ec6 Mon Sep 17 00:00:00 2001 > -From: Fabrice Fontaine > -Date: Sun, 14 Aug 2022 20:31:30 +0200 > -Subject: [PATCH] configure.ac: fix build without dlfcn.h > - > -Fix the following static build failure (i.e. without dlfcn.h) raised > -since version 1.2.7 and > -https://github.com/alsa-project/alsa-utils/commit/44d3e8aa44fc12f95bfeef0e3a1051e8f77047b5: > - > -pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory > - 28 | #include > - | ^~~~~~~~~ > - > -Fixes: > - - http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e > - > -Signed-off-by: Fabrice Fontaine > -[Upstream status: https://github.com/alsa-project/alsa-utils/pull/165] > ---- > - configure.ac | 5 ++++- > - 1 file changed, 4 insertions(+), 1 deletion(-) > - > -diff --git a/configure.ac b/configure.ac > -index 20cbb68..6833800 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -27,6 +27,9 @@ AC_CHECK_FUNC([snd_ctl_elem_add_enumerated], > - , [AC_ERROR([No user enum control support in alsa-lib])]) > - fi > - > -+ > -+AC_CHECK_HEADERS([dlfcn.h]) > -+ > - dnl Check components > - AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"], > - [#include ]) > -@@ -74,7 +77,7 @@ AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes") > - AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes") > - AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes") > - AM_CONDITIONAL(HAVE_UCM, test "$have_ucm" = "yes") > --AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes") > -+AM_CONDITIONAL(HAVE_TOPOLOGY, test "$have_topology" = "yes" -a "$ac_cv_header_dlfcn_h" = "yes") > - AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes") > - AM_CONDITIONAL(HAVE_FFADO, test "$have_ffado" = "yes") > - > --- > -2.35.1 > - > diff --git a/package/alsa-utils/alsa-utils.mk b/package/alsa-utils/alsa-utils.mk > index 1b16a2457a..65a7853c79 100644 > --- a/package/alsa-utils/alsa-utils.mk > +++ b/package/alsa-utils/alsa-utils.mk > @@ -15,9 +15,6 @@ ALSA_UTILS_DEPENDENCIES = host-pkgconf alsa-lib \ > $(if $(BR2_PACKAGE_LIBSAMPLERATE),libsamplerate) \ > $(TARGET_NLS_DEPENDENCIES) > > -# We're patching configure.ac > -ALSA_UTILS_AUTORECONF = YES > - > ifeq ($(BR2_PACKAGE_ALSA_UTILS_ALSACTL),y) > ALSA_UTILS_SELINUX_MODULES += alsa > endif > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Sun Oct 30 19:44:23 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:44:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/flac: bump version to 1.4.2 Message-ID: <20221030194423.1208535-1-bernd.kuhls@t-online.de> Changelog: https://xiph.org/flac/changelog.html Switched _SITE to https and update project URL. Upstream removed the dependency to host-nasm: https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 Signed-off-by: Bernd Kuhls --- package/flac/Config.in | 2 +- package/flac/flac.hash | 4 ++-- package/flac/flac.mk | 11 ++--------- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/package/flac/Config.in b/package/flac/Config.in index 267acb7f34..62aca290fe 100644 --- a/package/flac/Config.in +++ b/package/flac/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC help FLAC is an Open Source lossless audio codec. - http://flac.sourceforge.net/ + https://xiph.org/flac/ comment "flac needs a toolchain w/ wchar" depends on !BR2_USE_WCHAR diff --git a/package/flac/flac.hash b/package/flac/flac.hash index 1f7763fd6e..b993ebd759 100644 --- a/package/flac/flac.hash +++ b/package/flac/flac.hash @@ -1,5 +1,5 @@ -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL diff --git a/package/flac/flac.mk b/package/flac/flac.mk index 91d5840d72..ebb4778521 100644 --- a/package/flac/flac.mk +++ b/package/flac/flac.mk @@ -4,8 +4,8 @@ # ################################################################################ -FLAC_VERSION = 1.4.0 -FLAC_SITE = http://downloads.xiph.org/releases/flac +FLAC_VERSION = 1.4.2 +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz FLAC_INSTALL_STAGING = YES FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) @@ -27,11 +27,4 @@ else FLAC_CONF_OPTS += --disable-ogg endif -ifeq ($(BR2_X86_CPU_HAS_SSE),y) -FLAC_DEPENDENCIES += host-nasm -FLAC_CONF_OPTS += --enable-sse -else -FLAC_CONF_OPTS += --disable-sse -endif - $(eval $(autotools-package)) -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:45:19 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:45:19 +0100 Subject: [Buildroot] [PATCH 2/2] package/intel-mediasdk: bump version to 22.6.0 In-Reply-To: <20221030194519.1208612-1-bernd.kuhls@t-online.de> References: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Message-ID: <20221030194519.1208612-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index 25894aea63..da4286ae23 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz +sha256 21a54b752c6b84f032b53a3e328d29f05a448b39f4c18f75fe4e79bb219dc40e intel-mediasdk-22.6.0.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index 4080188dc5..30fddfbcfd 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.4 +INTEL_MEDIASDK_VERSION = 22.6.0 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 19:45:18 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 20:45:18 +0100 Subject: [Buildroot] [PATCH 1/2] package/intel-mediadriver: bump version to 22.6.0 Message-ID: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 35e4c97c7c..d1698cbfb5 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index c2d480fa21..821c0920f4 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.4 +INTEL_MEDIADRIVER_VERSION = 22.6.0 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause -- 2.34.1 From james.hilliard1 at gmail.com Sun Oct 30 19:54:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 13:54:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/python-pillow: bump to version 9.3.0 Message-ID: <20221030195404.1221968-1-james.hilliard1@gmail.com> Signed-off-by: James Hilliard --- package/python-pillow/python-pillow.hash | 4 ++-- package/python-pillow/python-pillow.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash index 0e407bd55c..46da25dddc 100644 --- a/package/python-pillow/python-pillow.hash +++ b/package/python-pillow/python-pillow.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pillow/json -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz # Locally computed sha256 checksums sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk index 31725a3e46..5ea9fcf264 100644 --- a/package/python-pillow/python-pillow.mk +++ b/package/python-pillow/python-pillow.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_PILLOW_VERSION = 9.2.0 -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed +PYTHON_PILLOW_VERSION = 9.3.0 +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz PYTHON_PILLOW_LICENSE = HPND PYTHON_PILLOW_LICENSE_FILES = LICENSE -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 20:04:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:04:21 +0100 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221017201804.995212-2-giulio.benetti@benettiengineering.com> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> Message-ID: <20221030210421.6c2777b2@windsurf> On Mon, 17 Oct 2022 22:18:04 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > DEVELOPERS | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. However, please *always* resend complete patch series. For PATCH 1/2, you had sent a v2, and then a v3, and for this PATCH 2/2, only a v1 was there. This is *extremely* confusing for the maintainers. So when you need to send a new version of one patch in a patch series, please *always* resend the complete patch series, and mark the entire previous patch series as Superseded. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:04:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:04:27 +0100 Subject: [Buildroot] [PATCH v3] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 In-Reply-To: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> References: <20221018133936.356595-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030210427.659402eb@windsurf> On Tue, 18 Oct 2022 15:39:36 +0200 Giulio Benetti wrote: > Note that we use latest commit from branch v5.2.2.4 instead of > branch master. > > Fixes: > http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ > > Signed-off-by: Giulio Benetti > Reviewed-by: Petr Vorel > Reviewed-by: Luca Ceresoli > --- > V1->V2: > * use specific upstream commit SHA1 since the latest is buggy > V2->V3: > * use latest commit since it's been fixed and improve commit log as pointed by > Peter Seiderer > --- > package/rtl8188eu/rtl8188eu.hash | 2 +- > package/rtl8188eu/rtl8188eu.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:15 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:15 +0100 Subject: [Buildroot] [PATCH v2] package/rtl8188eu: remove wrong description in Config.in In-Reply-To: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> References: <20221019134823.12594-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030210615.49866828@windsurf> On Wed, 19 Oct 2022 15:48:23 +0200 Giulio Benetti wrote: > This rtl8188eu driver is not the same as the one in mainline Linux that > still has pending work to be done that in this driver is done, check: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO > specifically: > * Switch to use LIB80211. > * Switch to use MAC80211. > * Switch to use CFG80211. > So let's remove the description that is not valid anymore. > > Suggested-by: Luca Ceresoli > Signed-off-by: Giulio Benetti > --- > V1->V2: > * improve Config.in description as pointed by Luca Ceresoli > --- > package/rtl8188eu/Config.in | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/package/rtl8188eu/Config.in b/package/rtl8188eu/Config.in > index 76d9085297..2fab1fd5c0 100644 > --- a/package/rtl8188eu/Config.in > +++ b/package/rtl8188eu/Config.in > @@ -4,9 +4,10 @@ config BR2_PACKAGE_RTL8188EU > depends on BR2_LINUX_KERNEL > help > A standalone driver for the RTL8188EU USB Wi-Fi adapter. > - This is needed only for Linux kernels before 3.12. > - Since 3.12, there is a (staging) driver in mainline, with a > - similar codebase. > + This rtl8188eu driver is not the same as the one in mainline > + Linux that still has pending work to be done that in this > + driver is done, check: > + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/r8188eu/TODO I don't see any thing in this TODO that explains why the out-of-tree driver is better than the mainline driver. The out-of-tree driver has been integrated into drivers/staging/, and this TODO file lists what should be improved in the driver so that it can be graduated to move outside of drivers/staging/ into the proper drivers/net/wireless/ location. I don't see anything in this TODO that indicates that the out-of-tree driver has "more features" than the mainline driver, so to me the Config.in help text still makes sense. Could you give some more details? Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:49 +0100 Subject: [Buildroot] [git commit] DEVELOPERS: add Giulio Benetti to rtl8188eu package Message-ID: <20221030201810.DD5D987616@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d64fff456890941f6bbe220d37f021437e0e0d0 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Reviewed-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 46c2820c4e..b8b78976a4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1153,6 +1153,7 @@ F: package/nfs-utils/ F: package/python-uvloop/ F: package/qt5/ F: package/rockchip-mali/ +F: package/rtl8188eu/ F: package/rtl8189es/ F: package/rtl8723bu/ F: package/rtl8723ds/ From thomas.petazzoni at bootlin.com Sun Oct 30 20:10:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:10:16 +0100 Subject: [Buildroot] [git commit] package/uuu: bump to version 1.5.4 Message-ID: <20221030201810.EFD3B87618@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fed7c4406aa07f1fb99bad5d5669f8562eb6e6b9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fix memory leak cause by getaddrinfo - Fix crash when last block actual size < m_output_size - Add -dm to disable small memory for debug purpose - Fix a dead lock when reset stream - Stop http download when error happen - Add error check for all request_data - Fix linux build warning - Add gzip stream support - Rework buffer management to support small memory version - Fix support of empty environment variables in Windows OS - Fix crash when environment variable is last word in script - Fix update libusb path - Update libusb submodule - Drop vs2017 support. - Use $(DefaultPlatformToolset) - Try remove PlatformToolset and set WindowsTargetPlatformVersion to 10.0 Signed-off-by: Dario Binacchi Signed-off-by: Thomas Petazzoni --- package/uuu/uuu.hash | 2 +- package/uuu/uuu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uuu/uuu.hash b/package/uuu/uuu.hash index de00c649b1..50da0f9bf3 100644 --- a/package/uuu/uuu.hash +++ b/package/uuu/uuu.hash @@ -1,4 +1,4 @@ # locally computed -sha256 9fcfe317c379be1e274aae34c19e1fd57188107f8fd0cdd379fe4473aacc92b1 uuu_source-1.4.243.tar.gz +sha256 baaf3e031958075b96530d43d7435f19cb428088894066e0b02349a3b9666666 uuu_source-1.5.4.tar.gz sha256 cc8d47f7b9260f6669ecd41c24554c552f17581d81ee8fc602c6d23edb8bf495 LICENSE sha256 584bfbb18b4c08b872d48b80419dd453307212a144134fb516bd6ddc0700c2e8 README.md diff --git a/package/uuu/uuu.mk b/package/uuu/uuu.mk index 7ed2599598..681c1fbc44 100644 --- a/package/uuu/uuu.mk +++ b/package/uuu/uuu.mk @@ -4,7 +4,7 @@ # ################################################################################ -UUU_VERSION = 1.4.243 +UUU_VERSION = 1.5.4 UUU_SOURCE = uuu_source-$(UUU_VERSION).tar.gz UUU_SITE = https://github.com/NXPmicro/mfgtools/releases/download/uuu_$(UUU_VERSION) UUU_LICENSE = BSD 3-Clause "New" or "Revised" License From thomas.petazzoni at bootlin.com Sun Oct 30 20:06:49 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:06:49 +0100 Subject: [Buildroot] [git commit] package/rtl8188eu: bump version to fix build failure with linux >= 6.0.0 Message-ID: <20221030201810.E5CD987603@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ba74bc8b6783aa478d00f3318c13064d66274ca9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Note that we use latest commit from branch v5.2.2.4 instead of branch master. Fixes: http://autobuild.buildroot.org/results/550/550640296a92826f6f04d2344adde75c3025ea35/ Signed-off-by: Giulio Benetti Reviewed-by: Petr Vorel Reviewed-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni --- package/rtl8188eu/rtl8188eu.hash | 2 +- package/rtl8188eu/rtl8188eu.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/rtl8188eu/rtl8188eu.hash b/package/rtl8188eu/rtl8188eu.hash index 9c7f2de4b6..0ad7786328 100644 --- a/package/rtl8188eu/rtl8188eu.hash +++ b/package/rtl8188eu/rtl8188eu.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 6bc46a13b20a2ed121844e51fd690216b2ab3b1faa1af8d9501090026ca9bd22 rtl8188eu-903b6fcb821465fe9c63e83416080df70c1c3c90.tar.gz +sha256 50529c110e0a45fbe3169d0e237c4d0959300840f5e162c24256452976fb2670 rtl8188eu-c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba.tar.gz sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/package/rtl8188eu/rtl8188eu.mk b/package/rtl8188eu/rtl8188eu.mk index ebce4617ac..199362d7ae 100644 --- a/package/rtl8188eu/rtl8188eu.mk +++ b/package/rtl8188eu/rtl8188eu.mk @@ -4,7 +4,7 @@ # ################################################################################ -RTL8188EU_VERSION = 903b6fcb821465fe9c63e83416080df70c1c3c90 +RTL8188EU_VERSION = c4908ca4caf861d858c4d9e8452a2ad5c88cf2ba RTL8188EU_SITE = $(call github,lwfinger,rtl8188eu,$(RTL8188EU_VERSION)) RTL8188EU_LICENSE = GPL-2.0, proprietary (rtl8188eufw.bin firmware blob) RTL8188EU_LICENSE_FILES = COPYING From bugzilla at busybox.net Sun Oct 30 20:19:22 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Sun, 30 Oct 2022 20:19:22 +0000 Subject: [Buildroot] [Bug 15061] Node.js Package fails to build against musl i386 In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15061 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #3 from Thomas Petazzoni --- Fixed by https://gitlab.com/buildroot.org/buildroot/-/commit/7935e427bce601f16ee194978583e533213f78c6 -- You are receiving this mail because: You are on the CC list for the bug. From bugzilla at busybox.net Sun Oct 30 20:20:05 2022 From: bugzilla at busybox.net (bugzilla at busybox.net) Date: Sun, 30 Oct 2022 20:20:05 +0000 Subject: [Buildroot] [Bug 15071] RTL8723BS library is outdated In-Reply-To: References: Message-ID: https://bugs.busybox.net/show_bug.cgi?id=15071 Thomas Petazzoni changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |WONTFIX -- You are receiving this mail because: You are on the CC list for the bug. From yann.morin.1998 at free.fr Sun Oct 30 20:22:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:38 +0100 Subject: [Buildroot] [git commit] package/python-pluggy: enable host package build Message-ID: <20221030202515.A71278764C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=47504a72e8a6526258516fdc35122494a4d4b529 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This will be needed for the upcoming host-python-hatchling. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-pluggy/python-pluggy.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk index 59382518ed..6dc6f970ea 100644 --- a/package/python-pluggy/python-pluggy.mk +++ b/package/python-pluggy/python-pluggy.mk @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools PYTHON_PLUGGY_LICENSE = MIT PYTHON_PLUGGY_LICENSE_FILES = LICENSE PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm $(eval $(python-package)) +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:44 +0100 Subject: [Buildroot] [git commit] package/python-hatchling: new package Message-ID: <20221030202515.C856A8764F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=626c5bedaa7e1461dd3747562b9c04dd40713c83 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This is a new pep517 based build backend. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-hatchling/python-hatchling.hash | 5 +++++ package/python-hatchling/python-hatchling.mk | 19 +++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 2c33726c77..1a38b329c3 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1385,6 +1385,7 @@ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ +F: package/python-hatchling/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatchling/python-hatchling.hash b/package/python-hatchling/python-hatchling.hash new file mode 100644 index 0000000000..41d7be977e --- /dev/null +++ b/package/python-hatchling/python-hatchling.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatchling/json +md5 e06cc65ac646f9b01df5406aa1f97022 hatchling-1.11.1.tar.gz +sha256 9f84361f70cf3a7ab9543b0c3ecc64211ed2ba8a606a71eb6a473c1c9b08e1d0 hatchling-1.11.1.tar.gz +# Locally computed sha256 checksums +sha256 7f143a8127ad4873862d70854b5bd2abd0085aa73e64fd2b08704a3b9f5c07fc LICENSE.txt diff --git a/package/python-hatchling/python-hatchling.mk b/package/python-hatchling/python-hatchling.mk new file mode 100644 index 0000000000..13155a20a4 --- /dev/null +++ b/package/python-hatchling/python-hatchling.mk @@ -0,0 +1,19 @@ +################################################################################ +# +# python-hatchling +# +################################################################################ + +PYTHON_HATCHLING_VERSION = 1.11.1 +PYTHON_HATCHLING_SOURCE = hatchling-$(PYTHON_HATCHLING_VERSION).tar.gz +PYTHON_HATCHLING_SITE = https://files.pythonhosted.org/packages/24/20/3e21d2bc57229822ac9fb9b314d7892c16f829f34a0eb247c55fc11e09a8 +PYTHON_HATCHLING_LICENSE = MIT +PYTHON_HATCHLING_LICENSE_FILES = LICENSE.txt +PYTHON_HATCHLING_SETUP_TYPE = pep517 +HOST_PYTHON_HATCHLING_DEPENDENCIES = \ + host-python-editables \ + host-python-packaging \ + host-python-pathspec \ + host-python-pluggy + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:40 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:40 +0100 Subject: [Buildroot] [git commit] package/python-editables: new package Message-ID: <20221030202515.B23978764D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6d70fac1350a88a8e0e87d0d1b0bcf80eeeb5cf3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-editables/python-editables.hash | 5 +++++ package/python-editables/python-editables.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index b8b78976a4..2047b77b82 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1380,6 +1380,7 @@ F: package/python-cbor2/ F: package/python-cchardet/ F: package/python-charset-normalizer/ F: package/python-cssselect2/ +F: package/python-editables/ F: package/python-flatbuffers/ F: package/python-fonttools/ F: package/python-frozenlist/ diff --git a/package/python-editables/python-editables.hash b/package/python-editables/python-editables.hash new file mode 100644 index 0000000000..3c28c44cc3 --- /dev/null +++ b/package/python-editables/python-editables.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/editables/json +md5 e91709fbb0ef586cb7b785042068ab67 editables-0.3.tar.gz +sha256 167524e377358ed1f1374e61c268f0d7a4bf7dbd046c656f7b410cde16161b1a editables-0.3.tar.gz +# Locally computed sha256 checksums +sha256 c73e08a04e1557fdb49525fb7a579f73bcab84a254910b9350ee56daf143932d LICENSE.txt diff --git a/package/python-editables/python-editables.mk b/package/python-editables/python-editables.mk new file mode 100644 index 0000000000..db67e7a16d --- /dev/null +++ b/package/python-editables/python-editables.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-editables +# +################################################################################ + +PYTHON_EDITABLES_VERSION = 0.3 +PYTHON_EDITABLES_SOURCE = editables-$(PYTHON_EDITABLES_VERSION).tar.gz +PYTHON_EDITABLES_SITE = https://files.pythonhosted.org/packages/01/b0/a2a87db4b6cb8e7d57004b6836faa634e0747e3e39ded126cdbe5a33ba36 +PYTHON_EDITABLES_LICENSE = MIT +PYTHON_EDITABLES_LICENSE_FILES = LICENSE.txt +PYTHON_EDITABLES_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:46 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:46 +0100 Subject: [Buildroot] [git commit] package/python-hatch-fancy-pypi-readme: new package Message-ID: <20221030202515.D30E48764C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=31e5453c06146233453d35121089d26606c25341 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + .../python-hatch-fancy-pypi-readme.hash | 5 +++++ .../python-hatch-fancy-pypi-readme.mk | 15 +++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1a38b329c3..02211b7bf4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1386,6 +1386,7 @@ F: package/python-fonttools/ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ +F: package/python-hatch-fancy-pypi-readme/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash new file mode 100644 index 0000000000..1b287072b7 --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_fancy_pypi_readme/json +md5 588776ea8e3608714d4cbba16dffa92b hatch_fancy_pypi_readme-22.8.0.tar.gz +sha256 da91282ca09601c18aded8e378daf8b578c70214866f0971156ee9bb9ce6c26a hatch_fancy_pypi_readme-22.8.0.tar.gz +# Locally computed sha256 checksums +sha256 e69ea57f96e599e617f61af3e85bf326b87e833994709fb5e5908a81197730a2 LICENSE.txt diff --git a/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk new file mode 100644 index 0000000000..f28721181a --- /dev/null +++ b/package/python-hatch-fancy-pypi-readme/python-hatch-fancy-pypi-readme.mk @@ -0,0 +1,15 @@ +################################################################################ +# +# python-hatch-fancy-pypi-readme +# +################################################################################ + +PYTHON_HATCH_FANCY_PYPI_README_VERSION = 22.8.0 +PYTHON_HATCH_FANCY_PYPI_README_SOURCE = hatch_fancy_pypi_readme-$(PYTHON_HATCH_FANCY_PYPI_README_VERSION).tar.gz +PYTHON_HATCH_FANCY_PYPI_README_SITE = https://files.pythonhosted.org/packages/4e/ab/9b48589d6e3a2f72cc1e8f5221c28ff28fcdf116dbbd6e9beb946054212d +PYTHON_HATCH_FANCY_PYPI_README_LICENSE = MIT +PYTHON_HATCH_FANCY_PYPI_README_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_FANCY_PYPI_README_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_FANCY_PYPI_README_DEPENDENCIES = host-python-hatchling + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:42 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:42 +0100 Subject: [Buildroot] [git commit] package/python-pathspec: new packages Message-ID: <20221030202515.BD7838764E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=eb9906b1290b11cd9f159f493b199c0d4e0d1102 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-pathspec/python-pathspec.hash | 5 +++++ package/python-pathspec/python-pathspec.mk | 14 ++++++++++++++ 3 files changed, 20 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 2047b77b82..2c33726c77 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1391,6 +1391,7 @@ F: package/python-logstash/ F: package/python-maturin/ F: package/python-multidict/ F: package/python-mypy-extensions/ +F: package/python-pathspec/ F: package/python-pep517/ F: package/python-pycares/ F: package/python-pydyf/ diff --git a/package/python-pathspec/python-pathspec.hash b/package/python-pathspec/python-pathspec.hash new file mode 100644 index 0000000000..91e4fb85b7 --- /dev/null +++ b/package/python-pathspec/python-pathspec.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/pathspec/json +md5 6f4fde5e701d328a2846d206edb63aa9 pathspec-0.10.1.tar.gz +sha256 7ace6161b621d31e7902eb6b5ae148d12cfd23f4a249b9ffb6b9fee12084323d pathspec-0.10.1.tar.gz +# Locally computed sha256 checksums +sha256 fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85 LICENSE diff --git a/package/python-pathspec/python-pathspec.mk b/package/python-pathspec/python-pathspec.mk new file mode 100644 index 0000000000..ccb794cce9 --- /dev/null +++ b/package/python-pathspec/python-pathspec.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-pathspec +# +################################################################################ + +PYTHON_PATHSPEC_VERSION = 0.10.1 +PYTHON_PATHSPEC_SOURCE = pathspec-$(PYTHON_PATHSPEC_VERSION).tar.gz +PYTHON_PATHSPEC_SITE = https://files.pythonhosted.org/packages/24/9f/a9ae1e6efa11992dba2c4727d94602bd2f6ee5f0dedc29ee2d5d572c20f7 +PYTHON_PATHSPEC_LICENSE = MPL-2.0 +PYTHON_PATHSPEC_LICENSE_FILES = LICENSE +PYTHON_PATHSPEC_SETUP_TYPE = setuptools + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:48 +0100 Subject: [Buildroot] [git commit] package/python-hatch-vcs: new package Message-ID: <20221030202515.DFC6E8764D@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7c488ef830655c6084ac59e75ff1a3b046a5e1c2 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- DEVELOPERS | 1 + package/python-hatch-vcs/python-hatch-vcs.hash | 5 +++++ package/python-hatch-vcs/python-hatch-vcs.mk | 17 +++++++++++++++++ 3 files changed, 23 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 02211b7bf4..f82a23b83e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1387,6 +1387,7 @@ F: package/python-frozenlist/ F: package/python-greenlet/ F: package/python-hatchling/ F: package/python-hatch-fancy-pypi-readme/ +F: package/python-hatch-vcs/ F: package/python-installer/ F: package/python-janus/ F: package/python-logstash/ diff --git a/package/python-hatch-vcs/python-hatch-vcs.hash b/package/python-hatch-vcs/python-hatch-vcs.hash new file mode 100644 index 0000000000..e57eeddd2f --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.hash @@ -0,0 +1,5 @@ +# md5, sha256 from https://pypi.org/pypi/hatch_vcs/json +md5 e56b6d0c05cfb9b59d493c67f94d6e48 hatch_vcs-0.2.0.tar.gz +sha256 9913d733b34eec9bb0345d0626ca32165a4ad2de15d1ce643c36d09ca908abff hatch_vcs-0.2.0.tar.gz +# Locally computed sha256 checksums +sha256 117aa5006d8475562f04442ab06dd2a4c501af3a77255eae0deef1f0c2499a1a LICENSE.txt diff --git a/package/python-hatch-vcs/python-hatch-vcs.mk b/package/python-hatch-vcs/python-hatch-vcs.mk new file mode 100644 index 0000000000..55c6461751 --- /dev/null +++ b/package/python-hatch-vcs/python-hatch-vcs.mk @@ -0,0 +1,17 @@ +################################################################################ +# +# python-hatch-vcs +# +################################################################################ + +PYTHON_HATCH_VCS_VERSION = 0.2.0 +PYTHON_HATCH_VCS_SOURCE = hatch_vcs-$(PYTHON_HATCH_VCS_VERSION).tar.gz +PYTHON_HATCH_VCS_SITE = https://files.pythonhosted.org/packages/ac/13/b3d83564c0cc0f1d45b4ea2a78b87b383a8165797613fedf11f1a7e49b48 +PYTHON_HATCH_VCS_LICENSE = MIT +PYTHON_HATCH_VCS_LICENSE_FILES = LICENSE.txt +PYTHON_HATCH_VCS_SETUP_TYPE = pep517 +HOST_PYTHON_HATCH_VCS_DEPENDENCIES = \ + host-python-hatchling \ + host-python-setuptools-scm + +$(eval $(host-python-package)) From yann.morin.1998 at free.fr Sun Oct 30 20:22:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:22:50 +0100 Subject: [Buildroot] [git commit] package/python-jsonschema: bump to version 4.16.0 Message-ID: <20221030202515.E8BDA8764E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=146e5a1b218b154f844058e24ccc94a3e341c34e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Migrate to new pep517 based hatchling build system. Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-jsonschema/python-jsonschema.hash | 4 ++-- package/python-jsonschema/python-jsonschema.mk | 10 +++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/package/python-jsonschema/python-jsonschema.hash b/package/python-jsonschema/python-jsonschema.hash index a2766f78cc..d4c2759811 100644 --- a/package/python-jsonschema/python-jsonschema.hash +++ b/package/python-jsonschema/python-jsonschema.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/jsonschema/json -md5 c3f7a29c187bf1d038c66a5d5763eab1 jsonschema-4.5.1.tar.gz -sha256 7c6d882619340c3347a1bf7315e147e6d3dae439033ae6383d6acb908c101dfc jsonschema-4.5.1.tar.gz +md5 3bc1f63a74fc61bf2847f22cadb0dfff jsonschema-4.16.0.tar.gz +sha256 165059f076eff6971bae5b742fc029a7b4ef3f9bcf04c14e4776a7605de14b23 jsonschema-4.16.0.tar.gz # Locally computed sha256 checksums sha256 4f92a015a13c4d1a040bef018aa13430b4f1bc73b41b16bb846c346766de7439 COPYING sha256 837402bd25fad9b704265801ca3f92566a98157c1f9a7acd6f446299ba1c305a json/LICENSE diff --git a/package/python-jsonschema/python-jsonschema.mk b/package/python-jsonschema/python-jsonschema.mk index 013a5c1293..68a25aed58 100644 --- a/package/python-jsonschema/python-jsonschema.mk +++ b/package/python-jsonschema/python-jsonschema.mk @@ -4,11 +4,15 @@ # ################################################################################ -PYTHON_JSONSCHEMA_VERSION = 4.5.1 +PYTHON_JSONSCHEMA_VERSION = 4.16.0 PYTHON_JSONSCHEMA_SOURCE = jsonschema-$(PYTHON_JSONSCHEMA_VERSION).tar.gz -PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/9e/62/93a54db0e44c4de57868a7d638d7a8abce113c8bc43a20b10b1109b2a517 -PYTHON_JSONSCHEMA_SETUP_TYPE = setuptools +PYTHON_JSONSCHEMA_SITE = https://files.pythonhosted.org/packages/cf/54/8923ba38b5145f2359d57e5516715392491d674c83f446cd4cd133eeb4d6 +PYTHON_JSONSCHEMA_SETUP_TYPE = pep517 PYTHON_JSONSCHEMA_LICENSE = MIT PYTHON_JSONSCHEMA_LICENSE_FILES = COPYING json/LICENSE +PYTHON_JSONSCHEMA_DEPENDENCIES = \ + host-python-hatchling \ + host-python-hatch-fancy-pypi-readme \ + host-python-hatch-vcs $(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:26:29 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:26:29 +0100 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring In-Reply-To: <20221014230905.3091021-1-james.hilliard1@gmail.com> References: <20221014230905.3091021-1-james.hilliard1@gmail.com> Message-ID: <20221030212629.51bf650e@windsurf> Hello James, On Fri, 14 Oct 2022 17:09:05 -0600 James Hilliard wrote: > +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) I must be missing something, but why is -$(MAKEFLAGS) used and not just $(MAKEFLAGS) ? Indeed, with "make -s --debug -k", $(MAKEFLAGS) is "ks --debug=all", and therefore $(firstword $(MAKEFLAGS)) is ks, which is good enough for the findstring s, no? Why is adding a - in front needed? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Sun Oct 30 20:27:18 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 21:27:18 +0100 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build In-Reply-To: <20221019215348.3262192-1-james.hilliard1@gmail.com> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> Message-ID: <20221030202718.GG1058960@scaer> James, All, On 2022-10-19 15:53 -0600, James Hilliard spake thusly: > This will be needed for the upcoming host-python-hatchling. > > Signed-off-by: James Hilliard Whole series applied to master, thanks. I really wonder how many pep517 buildsystems there will be, and how many packages we'll have to introduce... Fantastic... Regards, Yann E. MORIN. > --- > package/python-pluggy/python-pluggy.mk | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk > index 59382518ed..6dc6f970ea 100644 > --- a/package/python-pluggy/python-pluggy.mk > +++ b/package/python-pluggy/python-pluggy.mk > @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools > PYTHON_PLUGGY_LICENSE = MIT > PYTHON_PLUGGY_LICENSE_FILES = LICENSE > PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > $(eval $(python-package)) > +$(eval $(host-python-package)) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 20:29:20 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:29:20 +0100 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221015005813.4055238-1-james.hilliard1@gmail.com> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> Message-ID: <20221030212920.3dd30baa@windsurf> Hello James, On Fri, 14 Oct 2022 18:58:13 -0600 James Hilliard wrote: > The bearssl package is not compatible with parallel builds. > > Fixes: > - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > Signed-off-by: James Hilliard > --- > package/bearssl/bearssl.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Based on the feedback which said that fixing bearssl was preferred over using $(MAKE1), I have marked this patch as Changes Requested. Could you see at fixing the bearssl build system, submit the fix upstream, and provide the fix for Buildroot? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:35:47 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:35:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/rtl8192eu: new package In-Reply-To: <20221014200918.2816609-1-james.hilliard1@gmail.com> References: <20221014200918.2816609-1-james.hilliard1@gmail.com> Message-ID: <20221030213547.2ddf9fc7@windsurf> On Fri, 14 Oct 2022 14:09:18 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > Changes v1 -> v2: > - update to latest 5.11.2.1 version fixing issues on latest kernel > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > package/rtl8192eu/Config.in | 13 +++++++++++++ > package/rtl8192eu/rtl8192eu.hash | 2 ++ > package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ > 5 files changed, 40 insertions(+) > create mode 100644 package/rtl8192eu/Config.in > create mode 100644 package/rtl8192eu/rtl8192eu.hash > create mode 100644 package/rtl8192eu/rtl8192eu.mk Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From james.hilliard1 at gmail.com Sun Oct 30 20:35:43 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 16:35:43 -0400 Subject: [Buildroot] [PATCH 1/1] Makefile: identify silent make via firstword findstring In-Reply-To: <20221030212629.51bf650e@windsurf> References: <20221014230905.3091021-1-james.hilliard1@gmail.com> <20221030212629.51bf650e@windsurf> Message-ID: On Sun, Oct 30, 2022 at 4:26 PM Thomas Petazzoni wrote: > > Hello James, > > On Fri, 14 Oct 2022 17:09:05 -0600 > James Hilliard wrote: > > > +QUIET := $(if $(findstring s,$(firstword -$(MAKEFLAGS))),-q) > > I must be missing something, but why is -$(MAKEFLAGS) used and not just > $(MAKEFLAGS) ? > > Indeed, with "make -s --debug -k", $(MAKEFLAGS) is "ks --debug=all", > and therefore $(firstword $(MAKEFLAGS)) is ks, which is good enough for > the findstring s, no? Why is adding a - in front needed? I think so that if $(MAKEFLAGS) doesn't have any short options that it won't accidentally match on a long option. For example if $(MAKEFLAGS) is " --shuffle=none" the - in front ensures that we don't match the s in a long option like shuffle. > > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:04 +0100 Subject: [Buildroot] [git commit] package/rtl8192eu: new package Message-ID: <20221030203614.A24F487667@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ad62fa3acb4faff72385e841af700f09985ce07e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/rtl8192eu/Config.in | 13 +++++++++++++ package/rtl8192eu/rtl8192eu.hash | 2 ++ package/rtl8192eu/rtl8192eu.mk | 23 +++++++++++++++++++++++ 5 files changed, 40 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index f82a23b83e..8dbd0e0ebb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1411,6 +1411,7 @@ F: package/python-typing-inspect/ F: package/python-weasyprint/ F: package/python-yarl/ F: package/python-zopfli/ +F: package/rtl8192eu/ F: package/serd/ F: package/sord/ F: package/sratom/ diff --git a/package/Config.in b/package/Config.in index d691471877..1f4cfa7cfd 100644 --- a/package/Config.in +++ b/package/Config.in @@ -579,6 +579,7 @@ endmenu source "package/rtl8188eu/Config.in" source "package/rtl8189es/Config.in" source "package/rtl8189fs/Config.in" + source "package/rtl8192eu/Config.in" source "package/rtl8723bu/Config.in" source "package/rtl8723ds/Config.in" source "package/rtl8812au-aircrack-ng/Config.in" diff --git a/package/rtl8192eu/Config.in b/package/rtl8192eu/Config.in new file mode 100644 index 0000000000..4d71b711c3 --- /dev/null +++ b/package/rtl8192eu/Config.in @@ -0,0 +1,13 @@ +config BR2_PACKAGE_RTL8192EU + bool "rtl8192eu" + depends on BR2_LINUX_KERNEL + help + A standalone driver for the RTL8192EU USB Wi-Fi adapter. + + Make sure your target kernel has the CONFIG_WIRELESS_EXT + config option enabled. + + https://github.com/clnhub/rtl8192eu-linux + +comment "rtl8192eu needs a Linux kernel to be built" + depends on !BR2_LINUX_KERNEL diff --git a/package/rtl8192eu/rtl8192eu.hash b/package/rtl8192eu/rtl8192eu.hash new file mode 100644 index 0000000000..f616def194 --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 75b523ff1cda54d7cd8734a043b2d145231ab81fcc13d3edcd80e00d59201409 rtl8192eu-1e15b6d451731bc4d3ffd587194dc4bd0f286ac0.tar.gz diff --git a/package/rtl8192eu/rtl8192eu.mk b/package/rtl8192eu/rtl8192eu.mk new file mode 100644 index 0000000000..0e8ffea5cb --- /dev/null +++ b/package/rtl8192eu/rtl8192eu.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# rtl8192eu +# +################################################################################ + +RTL8192EU_VERSION = 1e15b6d451731bc4d3ffd587194dc4bd0f286ac0 +RTL8192EU_SITE = $(call github,clnhub,rtl8192eu-linux,$(RTL8192EU_VERSION)) +RTL8192EU_LICENSE = GPL-2.0 +RTL8192EU_MODULE_MAKE_OPTS = \ + CONFIG_RTL8192EU=m \ + USER_EXTRA_CFLAGS="-Wno-error" + +define RTL8192EU_LINUX_CONFIG_FIXUPS + $(call KCONFIG_ENABLE_OPT,CONFIG_NET) + $(call KCONFIG_ENABLE_OPT,CONFIG_WIRELESS) + $(call KCONFIG_ENABLE_OPT,CONFIG_CFG80211) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB_SUPPORT) + $(call KCONFIG_ENABLE_OPT,CONFIG_USB) +endef + +$(eval $(kernel-module)) +$(eval $(generic-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:54 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: drop dbus check In-Reply-To: References: Message-ID: <20221030213654.354999c4@windsurf> On Mon, 17 Oct 2022 06:21:18 +0000 Lang Daniel via buildroot wrote: > Since 6f5f6bc dbus is selected when iwd is selected. > It is only a runtime dependency, so drop the build > dependency. > > Signed-off-by: Daniel Lang > --- > Changed v1 -> v2: > - dbus is only a runtime dependency, drop > the build dependency (thanks Yann). Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:36:43 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:36:43 +0100 Subject: [Buildroot] [git commit] package/iwd: drop dbus check Message-ID: <20221030203754.83ED487670@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Since 6f5f6bc dbus is selected when iwd is selected. It is only a runtime dependency, so drop the build dependency. Signed-off-by: Daniel Lang Signed-off-by: Thomas Petazzoni --- package/iwd/iwd.mk | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 297e1fabe9..002988cf33 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -15,16 +15,11 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ - --enable-external-ell + --enable-external-ell \ + --enable-dbus-policy \ + --with-dbus-datadir=/usr/share IWD_DEPENDENCIES = ell -ifeq ($(BR2_PACKAGE_DBUS),y) -IWD_CONF_OPTS += --enable-dbus-policy --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES += dbus -else -IWD_CONF_OPTS += --disable-dbus-policy -endif - ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) IWD_LICENSE += , GPL-3.0+ (client) From giulio.benetti at benettiengineering.com Sun Oct 30 20:39:56 2022 From: giulio.benetti at benettiengineering.com (Giulio Benetti) Date: Sun, 30 Oct 2022 21:39:56 +0100 Subject: [Buildroot] [PATCH 2/2] DEVELOPERS: add Giulio Benetti to rtl8188eu package In-Reply-To: <20221030210421.6c2777b2@windsurf> References: <20221017201804.995212-1-giulio.benetti@benettiengineering.com> <20221017201804.995212-2-giulio.benetti@benettiengineering.com> <20221030210421.6c2777b2@windsurf> Message-ID: On 30/10/22 21:04, Thomas Petazzoni via buildroot wrote: > On Mon, 17 Oct 2022 22:18:04 +0200 > Giulio Benetti wrote: > >> Signed-off-by: Giulio Benetti >> --- >> DEVELOPERS | 1 + >> 1 file changed, 1 insertion(+) > > Applied to master, thanks. > > However, please *always* resend complete patch series. For PATCH 1/2, > you had sent a v2, and then a v3, and for this PATCH 2/2, only a v1 was > there. This is *extremely* confusing for the maintainers. > > So when you need to send a new version of one patch in a patch series, > please *always* resend the complete patch series, and mark the entire > previous patch series as Superseded. Pardon Thomas, I've lost track of the DEVELOPERS patch while focusing on the 1/2 patch. I'll pay more attention. Best regards -- Giulio Benetti Benetti Engineering sas From thomas.petazzoni at bootlin.com Sun Oct 30 20:43:00 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:43:00 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-2-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> Message-ID: <20221030214300.629c8f7b@windsurf> On Fri, 14 Oct 2022 08:58:56 +0200 Angelo Compagnucci wrote: > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full > + # path for locating firmware file. > + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") Unfortunately, this is really not a good idea, especially if it is meant to be used with your rtl8723ds-bt package. Indeed, the rtl8723ds-bt firmware is according to your package under a PROPRIETARY license, so not compatible with the GPL. Except that CONFIG_EXTRA_FIRMWARE_DIR can only be used for firmware that is GPL-compatible, as they get linked into the kernel image. What you're proposing to do makes it illegal to distribute the resulting kernel image. You can do it on your machine, but you're not allowed to distribute this kernel image, which for something like Buildroot is a bit of a problem, as you can imagine. See https://elixir.bootlin.com/linux/latest/source/Documentation/driver-api/firmware/built-in-fw.rst#L21 The only options for such firmware is: (1) In the root filesystem, which means the driver needs to be a module... but that's anyway OK as it's going to be the case as it's an out of tree kernel driver, and therefore always compiled as a module. (2) In an initramfs loaded separately from the kernel. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:48:09 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:48:09 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221014065900.3311604-4-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> Message-ID: <20221030214809.1fa5997c@windsurf> On Fri, 14 Oct 2022 08:58:58 +0200 Angelo Compagnucci wrote: > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > > # Starting with 4.16, the generated kconfig paser code is no longer > # shipped with the kernel sources, so we need flex and bison, but > diff --git a/package/Config.in b/package/Config.in > index e3a34d6e97..4f6e508106 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -578,6 +578,7 @@ endmenu > source "package/rtl8189fs/Config.in" > source "package/rtl8723bu/Config.in" > source "package/rtl8723ds/Config.in" > + source "package/rtl8723ds-bt/Config.in" > source "package/rtl8812au-aircrack-ng/Config.in" > source "package/rtl8821au/Config.in" > source "package/sane-backends/Config.in" > diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in > new file mode 100644 > index 0000000000..ab4ba0bf11 > --- /dev/null > +++ b/package/rtl8723ds-bt/Config.in > @@ -0,0 +1,6 @@ > +config BR2_PACKAGE_RTL8723DS_BT > + bool "rtl8723ds-bt" > + help > + rtl8723ds UART attached Bluetooth driver So here you're saying this package is for a driver. > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > + $(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) > +endef > + > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > + cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > + cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin But here you are only installing the firmware file, and you're not building the kernel module that is provided in this Git repository. Is it because the driver is in the upstream kernel, and the only part that it lacks is the firmware? This is not really clear in your commit log nor in the Config.in help text. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:49:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:49:53 +0100 Subject: [Buildroot] [git commit] package/python-minimalmodbus: new package Message-ID: <20221030205021.08C0F8767A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=30df48b207e6c9f63f751d49e9e783fe5e0b6ecd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. Signed-off-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/python-minimalmodbus/Config.in | 7 +++++++ package/python-minimalmodbus/python-minimalmodbus.hash | 4 ++++ package/python-minimalmodbus/python-minimalmodbus.mk | 14 ++++++++++++++ 5 files changed, 27 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 8dbd0e0ebb..1380ae6a98 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -173,6 +173,7 @@ F: package/mono-gtksharp3/ F: package/monolite/ F: package/openjpeg/ F: package/python-can/ +F: package/python-minimalmodbus/ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ diff --git a/package/Config.in b/package/Config.in index 1f4cfa7cfd..7ae354d6eb 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1116,6 +1116,7 @@ menu "External python modules" source "package/python-mbstrdecoder/Config.in" source "package/python-memory-profiler/Config.in" source "package/python-mimeparse/Config.in" + source "package/python-minimalmodbus/Config.in" source "package/python-mistune/Config.in" source "package/python-modbus-tk/Config.in" source "package/python-more-itertools/Config.in" diff --git a/package/python-minimalmodbus/Config.in b/package/python-minimalmodbus/Config.in new file mode 100644 index 0000000000..fd0f33e0d4 --- /dev/null +++ b/package/python-minimalmodbus/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_PYTHON_MINIMALMODBUS + bool "python-minimalmodbus" + select BR2_PACKAGE_PYTHON_SERIAL # runtime + help + Easy-to-use Modbus RTU and Modbus ASCII implementation. + + https://minimalmodbus.readthedocs.io/ diff --git a/package/python-minimalmodbus/python-minimalmodbus.hash b/package/python-minimalmodbus/python-minimalmodbus.hash new file mode 100644 index 0000000000..b29e83773b --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.hash @@ -0,0 +1,4 @@ +# sha256 from https://pypi.org/project/minimalmodbus +sha256 cf873a2530be3f4b86467c3e4d47b5f69fd345d47451baca4adbf59e2ac36d00 minimalmodbus-2.0.1.tar.gz +# Hash for license file +sha256 abe787d472ae2069e935c84eb13fd770518dfb08b92d5f190f3cd7ff6d1f6f32 LICENSE diff --git a/package/python-minimalmodbus/python-minimalmodbus.mk b/package/python-minimalmodbus/python-minimalmodbus.mk new file mode 100644 index 0000000000..b463cf9ffe --- /dev/null +++ b/package/python-minimalmodbus/python-minimalmodbus.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# python-minimalmodbus +# +################################################################################ + +PYTHON_MINIMALMODBUS_VERSION = 2.0.1 +PYTHON_MINIMALMODBUS_SOURCE = minimalmodbus-$(PYTHON_MINIMALMODBUS_VERSION).tar.gz +PYTHON_MINIMALMODBUS_SITE = https://files.pythonhosted.org/packages/78/99/8cd22b4465e697bae2b02fd06aaccd4c5cdfbb18945d728db99f23d71df9 +PYTHON_MINIMALMODBUS_SETUP_TYPE = setuptools +PYTHON_MINIMALMODBUS_LICENSE = Apache-2.0 +PYTHON_MINIMALMODBUS_LICENSE_FILES = LICENSE + +$(eval $(python-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 20:51:01 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:51:01 +0100 Subject: [Buildroot] [PATCH v3] package/python-minimalmodbus: new package In-Reply-To: <20221019133511.1717939-1-angelo@amarulasolutions.com> References: <20221019133511.1717939-1-angelo@amarulasolutions.com> Message-ID: <20221030215101.47713626@windsurf> On Wed, 19 Oct 2022 15:35:11 +0200 Angelo Compagnucci wrote: > Easy-to-use Modbus RTU and Modbus ASCII implementation for Python. > > Signed-off-by: Angelo Compagnucci Applied t master with one change, see below. > +PYTHON_MINIMALMODBUS_LICENSE = Apache License 2.0 This is not a valid SPDX identifier. The correct identifier is Apache-2.0. Committed with this fixed. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From angelo at amarulasolutions.com Sun Oct 30 20:52:40 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 30 Oct 2022 21:52:40 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221030214300.629c8f7b@windsurf> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> <20221030214300.629c8f7b@windsurf> Message-ID: On Sun, Oct 30, 2022 at 9:43 PM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:56 +0200 > Angelo Compagnucci wrote: > > > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the > firmware full > > + # path for locating firmware file. > > + $(call > KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") > > Unfortunately, this is really not a good idea, especially if it is > meant to be used with your rtl8723ds-bt package. Indeed, the > rtl8723ds-bt firmware is according to your package under a PROPRIETARY > license, so not compatible with the GPL. > Let's suppose the firware I was planning to load permits to be distributed within the kernk, why it isn't a good idea? I don't think technically there is some problems here, else let me understand. > Except that CONFIG_EXTRA_FIRMWARE_DIR can only be used for firmware > that is GPL-compatible, as they get linked into the kernel image. What > you're proposing to do makes it illegal to distribute the resulting > kernel image. You can do it on your machine, but you're not allowed to > distribute this kernel image, which for something like Buildroot is a > bit of a problem, as you can imagine. > > See > > https://elixir.bootlin.com/linux/latest/source/Documentation/driver-api/firmware/built-in-fw.rst#L21 I don't really want to go down the rabbit hole of what is legal or not, there are legal departments for that. If you think the driver in question is not accptable, I'm ok with that, but I think the mechanism should stay for all the people who need to do something like that. > > The only options for such firmware is: > > (1) In the root filesystem, which means the driver needs to be a > module... but that's anyway OK as it's going to be the case as it's an > out of tree kernel driver, and therefore always compiled as a > module. > > (2) In an initramfs loaded separately from the kernel. > Let's discuss this in the driver, I'm more than welcome to change the way I conceived it. > Best regards, > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelo at amarulasolutions.com Sun Oct 30 20:55:10 2022 From: angelo at amarulasolutions.com (Angelo Compagnucci) Date: Sun, 30 Oct 2022 21:55:10 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: <20221030214809.1fa5997c@windsurf> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> <20221030214809.1fa5997c@windsurf> Message-ID: On Sun, Oct 30, 2022 at 9:48 PM Thomas Petazzoni < thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:58 +0200 > Angelo Compagnucci wrote: > > > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > > $(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > > $(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > > $(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > > - $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > > + $(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > > + $(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > > > > # Starting with 4.16, the generated kconfig paser code is no longer > > # shipped with the kernel sources, so we need flex and bison, but > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..4f6e508106 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -578,6 +578,7 @@ endmenu > > source "package/rtl8189fs/Config.in" > > source "package/rtl8723bu/Config.in" > > source "package/rtl8723ds/Config.in" > > + source "package/rtl8723ds-bt/Config.in" > > source "package/rtl8812au-aircrack-ng/Config.in" > > source "package/rtl8821au/Config.in" > > source "package/sane-backends/Config.in" > > diff --git a/package/rtl8723ds-bt/Config.in > b/package/rtl8723ds-bt/Config.in > > new file mode 100644 > > index 0000000000..ab4ba0bf11 > > --- /dev/null > > +++ b/package/rtl8723ds-bt/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_RTL8723DS_BT > > + bool "rtl8723ds-bt" > > + help > > + rtl8723ds UART attached Bluetooth driver > > So here you're saying this package is for a driver. > > > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > > + $(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > > + $(call > KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin > rtl_bt/rtl8723ds_config.bin) > > +endef > > + > > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > > + mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > > + cp $(@D)/8723D/rtl8723d_fw > $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > > + cp $(@D)/8723D/rtl8723d_config > $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin > > But here you are only installing the firmware file, and you're not > building the kernel module that is provided in this Git repository. > > Is it because the driver is in the upstream kernel, and the only part > that it lacks is the firmware? > > This is not really clear in your commit log nor in the Config.in help > text. > Thi package "enables" (as in the commit log) the module, I didn't want to word differently, because what we are really doing here is simply enabling some kernel drivers and offering a way to download the firmware. Anyway, I will reword it better. > > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > -- Angelo Compagnucci Software Engineer angelo at amarulasolutions.com __________________________________ Amarula Solutions SRL Via le Canevare 30, 31100 Treviso, Veneto, IT T. +39 (0)42 243 5310 info at amarulasolutions.com www.amarulasolutions.com [`as] https://www.amarulasolutions.com| -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas.petazzoni at bootlin.com Sun Oct 30 20:51:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:51:10 +0100 Subject: [Buildroot] [git commit] package/paho-mqtt-c: bump to version 1.3.11 Message-ID: <20221030205640.34C9687686@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f0a5cd606f260d85f1a74a3af5fbf2b11edae3c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Service release. Issues resolved: https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 Signed-off-by: Daniel Lang Signed-off-by: Thomas Petazzoni --- package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/paho-mqtt-c/paho-mqtt-c.hash b/package/paho-mqtt-c/paho-mqtt-c.hash index 931bf5b9c8..1949abdf1a 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.hash +++ b/package/paho-mqtt-c/paho-mqtt-c.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 c70db96e66adacae411d5d875fbb08bca6ff9945de3d215b3af93cbd22792db5 paho-mqtt-c-1.3.10.tar.gz +sha256 d7bba3f8b8978802e11e2b1f28e96e6b7f4ed5d8a268af52a4d3b1bcbd1db16b paho-mqtt-c-1.3.11.tar.gz sha256 83bbba033dc985487e321b6dfde111772affb73460be48726299fed3da684b1c edl-v10 sha256 0becf16567beb77fa252b7664631dd177c8f9a1889e48995b45379c7130e5303 epl-v20 sha256 bc0f3f447097eb82a29ad6c2f4929572bb548b6bd4c9e38fde1bf131a771b7a0 LICENSE diff --git a/package/paho-mqtt-c/paho-mqtt-c.mk b/package/paho-mqtt-c/paho-mqtt-c.mk index 1b6fc5785c..30daf863ad 100644 --- a/package/paho-mqtt-c/paho-mqtt-c.mk +++ b/package/paho-mqtt-c/paho-mqtt-c.mk @@ -4,7 +4,7 @@ # ################################################################################ -PAHO_MQTT_C_VERSION = 1.3.10 +PAHO_MQTT_C_VERSION = 1.3.11 PAHO_MQTT_C_SITE = $(call github,eclipse,paho.mqtt.c,v$(PAHO_MQTT_C_VERSION)) PAHO_MQTT_C_LICENSE = EPL-2.0 or BSD-3-Clause PAHO_MQTT_C_LICENSE_FILES = epl-v20 edl-v10 LICENSE From thomas.petazzoni at bootlin.com Sun Oct 30 20:56:45 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:56:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/paho-mqtt-c: bump to version 1.3.11 In-Reply-To: References: Message-ID: <20221030215645.1a41ec82@windsurf> On Wed, 19 Oct 2022 09:14:20 +0000 Lang Daniel via buildroot wrote: > Service release. Issues resolved: > https://github.com/eclipse/paho.mqtt.c/milestone/18?closed=1 > > https://github.com/eclipse/paho.mqtt.c/releases/tag/v1.3.11 > > Signed-off-by: Daniel Lang > --- > package/paho-mqtt-c/paho-mqtt-c.hash | 2 +- > package/paho-mqtt-c/paho-mqtt-c.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 20:57:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 21:57:59 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221029082510.61178-1-fontaine.fabrice@gmail.com> References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> Message-ID: <20221030215759.0d848e58@windsurf> Hello Fabrice, On Sat, 29 Oct 2022 10:25:10 +0200 Fabrice Fontaine wrote: > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > Signed-off-by: Fabrice Fontaine We have zillions of build failures for host-pahole: http://autobuild.buildroot.net/?reason=host-pahole% Is this version bump fixing them? If not, do we have an idea on how to fix this build issue (I didn't investigated myself)? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:17:55 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:17:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: <20221030215759.0d848e58@windsurf> References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> <20221030215759.0d848e58@windsurf> Message-ID: Hello Thomas, Le dim. 30 oct. 2022 ? 21:58, Thomas Petazzoni a ?crit : > Hello Fabrice, > > On Sat, 29 Oct 2022 10:25:10 +0200 > Fabrice Fontaine wrote: > > > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > > > Signed-off-by: Fabrice Fontaine > > We have zillions of build failures for host-pahole: > > http://autobuild.buildroot.net/?reason=host-pahole% > > Is this version bump fixing them? If not, do we have an idea on how to > fix this build issue (I didn't investigated myself)? > Nope, this version bump will not fix these build failures. I tried to investigate but I wasn't able to reproduce it locally on my machine. These build failures are mostly raised by your autobuilder. My assumption is that your kernel is probably too old, bpf_link_type is only available since version 5.8 and https://github.com/torvalds/linux/commit/f2e10bff16a0fdd41ba278c84da9813700e356af However, I don't know how to add this dependency to host-pahole (and host-libbpf). > Thanks! > > Thomas > -- > Thomas Petazzoni, co-owner and CEO, Bootlin > Embedded Linux and Kernel engineering and training > https://bootlin.com > Best Regards, Fabrice -------------- next part -------------- An HTML attachment was scrubbed... URL: From yann.morin.1998 at free.fr Sun Oct 30 21:21:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 22:21:14 +0100 Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package In-Reply-To: References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-4-angelo@amarulasolutions.com> <20221030214809.1fa5997c@windsurf> Message-ID: <20221030212114.GH1058960@scaer> Angelo, All, On 2022-10-30 21:55 +0100, Angelo Compagnucci spake thusly: > On Sun, Oct 30, 2022 at 9:48 PM Thomas Petazzoni < [1]thomas.petazzoni at bootlin.com> wrote: > On Fri, 14 Oct 2022 08:58:58 +0200 > Angelo Compagnucci < [2]angelo at amarulasolutions.com> wrote: > > @@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \ > >? ? ? ?$(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \ > >? ? ? ?$(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \ > >? ? ? ?$(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \ > > -? ? ?$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) > > +? ? ?$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \ > > +? ? ?$(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt) > >? > >? # Starting with 4.16, the generated kconfig paser code is no longer > >? # shipped with the kernel sources, so we need flex and bison, but > > diff --git a/package/Config.in b/package/Config.in > > index e3a34d6e97..4f6e508106 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -578,6 +578,7 @@ endmenu > >? ? ? ?source "package/rtl8189fs/Config.in" > >? ? ? ?source "package/rtl8723bu/Config.in" > >? ? ? ?source "package/rtl8723ds/Config.in" > > +? ? ?source "package/rtl8723ds-bt/Config.in" > >? ? ? ?source "package/rtl8812au-aircrack-ng/Config.in" > >? ? ? ?source "package/rtl8821au/Config.in" > >? ? ? ?source "package/sane-backends/Config.in" > > diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in > > new file mode 100644 > > index 0000000000..ab4ba0bf11 > > --- /dev/null > > +++ b/package/rtl8723ds-bt/Config.in > > @@ -0,0 +1,6 @@ > > +config BR2_PACKAGE_RTL8723DS_BT > > +? ? ?bool "rtl8723ds-bt" > > +? ? ?help > > +? ? ? ?rtl8723ds UART attached Bluetooth driver > > So here you're saying this package is for a driver. > > > +define RTL8723DS_BT_LINUX_CONFIG_FIXUPS > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE) > > +? ? ?$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL) > > +? ? ?$(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin) > > +endef > > + > > +define RTL8723DS_BT_INSTALL_STAGING_CMDS > > +? ? ?mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/ > > +? ? ?cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin > > +? ? ?cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin > > But here you are only installing the firmware file, and you're not > building the kernel module that is provided in this Git repository. > > Is it because the driver is in the upstream kernel, and the only part > that it lacks is the firmware? > > This is not really clear in your commit log nor in the Config.in help > text. > > Thi package "enables" (as in the commit log) the module, I didn't want to word differently, because what we are really doing here is > simply enabling some kernel drivers and offering a way to download the firmware. Anyway, I will reword it better. Look at the other firmware packages we have: they only install the firmware blobs they provide. Enabling kernel options to enable a kernel driver is what the user does when they provide the configuration file for the kernel. We do not want to have an option in Buildroot for each driver that can be enabled in the kernel. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 21:19:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:19:34 +0100 Subject: [Buildroot] [git commit] package/openvmtools: add CPE ID information Message-ID: <20221030212300.E1EB087691@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=267188242e4edcfbca272168e62c2e9bc70864ce branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master See: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Avmware%3Atools Signed-off-by: Thomas Petazzoni --- package/openvmtools/openvmtools.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/openvmtools/openvmtools.mk b/package/openvmtools/openvmtools.mk index 59080c05aa..d536e5e819 100644 --- a/package/openvmtools/openvmtools.mk +++ b/package/openvmtools/openvmtools.mk @@ -10,6 +10,8 @@ OPENVMTOOLS_SITE = https://github.com/vmware/open-vm-tools/releases/download/sta OPENVMTOOLS_SOURCE = open-vm-tools-$(OPENVMTOOLS_VERSION).tar.gz OPENVMTOOLS_LICENSE = LGPL-2.1 OPENVMTOOLS_LICENSE_FILES = COPYING +OPENVMTOOLS_CPE_ID_VENDOR = vmware +OPENVMTOOLS_CPE_ID_PRODUCT = tools # configure.ac is patched OPENVMTOOLS_AUTORECONF = YES From thomas.petazzoni at bootlin.com Sun Oct 30 21:21:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:21:46 +0100 Subject: [Buildroot] [git commit] package/openvmtools: fix CVE-2022-31676 Message-ID: <20221030212300.ECBE887692@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b123e8887dc29eb2764162c048e8521a4072531a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch for CVE-2022-31676 (local privilege escalation vulnerability). Signed-off-by: Stefan Agner Signed-off-by: Thomas Petazzoni --- ...eck-authorization-on-incoming-guestOps-re.patch | 40 ++++++++++++++++++++++ package/openvmtools/openvmtools.mk | 3 ++ 2 files changed, 43 insertions(+) diff --git a/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch new file mode 100644 index 0000000000..91e379b9a6 --- /dev/null +++ b/package/openvmtools/0013-Properly-check-authorization-on-incoming-guestOps-re.patch @@ -0,0 +1,40 @@ +From bb9f9ffbb151397545f921cee5b6a4933c6eea80 Mon Sep 17 00:00:00 2001 +Message-Id: +From: John Wolfe +Date: Wed, 10 Aug 2022 06:12:02 -0700 +Subject: [PATCH] Properly check authorization on incoming guestOps requests + +Fix public pipe request checks. Only a SessionRequest type should +be accepted on the public pipe. + +Upstream: https://github.com/vmware/open-vm-tools/blob/CVE-2022-31676.patch/1205-Properly-check-authorization-on-incoming-guestOps-re.patch +Signed-off-by: Stefan Agner +--- + vgauth/serviceImpl/proto.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/vgauth/serviceImpl/proto.c b/vgauth/serviceImpl/proto.c +index db7159ee..c4f85b02 100644 +--- a/vgauth/serviceImpl/proto.c ++++ b/vgauth/serviceImpl/proto.c +@@ -1,5 +1,5 @@ + /********************************************************* +- * Copyright (C) 2011-2016,2019-2021 VMware, Inc. All rights reserved. ++ * Copyright (c) 2011-2016,2019-2022 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU Lesser General Public License as published +@@ -1201,6 +1201,10 @@ Proto_SecurityCheckRequest(ServiceConnection *conn, + VGAuthError err; + gboolean isSecure = ServiceNetworkIsConnectionPrivateSuperUser(conn); + ++ if (conn->isPublic && req->reqType != PROTO_REQUEST_SESSION_REQ) { ++ return VGAUTH_E_PERMISSION_DENIED; ++ } ++ + switch (req->reqType) { + /* + * This comes over the public connection; alwsys let it through. +-- +2.38.0 + diff --git a/package/openvmtools/openvmtools.mk b/package/openvmtools/openvmtools.mk index d536e5e819..3106b9ecd6 100644 --- a/package/openvmtools/openvmtools.mk +++ b/package/openvmtools/openvmtools.mk @@ -13,6 +13,9 @@ OPENVMTOOLS_LICENSE_FILES = COPYING OPENVMTOOLS_CPE_ID_VENDOR = vmware OPENVMTOOLS_CPE_ID_PRODUCT = tools +# 0013-Properly-check-authorization-on-incoming-guestOps-re.patch +OPENVMTOOLS_IGNORE_CVES += CVE-2022-31676 + # configure.ac is patched OPENVMTOOLS_AUTORECONF = YES OPENVMTOOLS_CONF_OPTS = --with-dnet \ From yann.morin.1998 at free.fr Sun Oct 30 21:23:33 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Sun, 30 Oct 2022 22:23:33 +0100 Subject: [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR In-Reply-To: <20221014065900.3311604-2-angelo@amarulasolutions.com> References: <20221014065900.3311604-1-angelo@amarulasolutions.com> <20221014065900.3311604-2-angelo@amarulasolutions.com> Message-ID: <20221030212333.GI1058960@scaer> Angelo, All, On 2022-10-14 08:58 +0200, Angelo Compagnucci spake thusly: > CONFIG_EXTRA_FIRMWARE_DIR must point to the directory where firmware > file from CONFIG_EXTRA_FIRMWARE will be taken to be embedded to the > kernel. > The option is removed if CONFIG_EXTRA_FIRMWARE is not used, but it > defaults to a sensible value when used. > > Signed-off-by: Angelo Compagnucci > --- > linux/linux.mk | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/linux/linux.mk b/linux/linux.mk > index efdc21eff2..9a909c7d7b 100644 > --- a/linux/linux.mk > +++ b/linux/linux.mk > @@ -408,6 +408,9 @@ define LINUX_KCONFIG_FIXUP_CMDS > $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO) > $(call KCONFIG_ENABLE_OPT,CONFIG_LOGO_LINUX_CLUT224)) > $(call KCONFIG_DISABLE_OPT,CONFIG_GCC_PLUGINS) > + # The kernel CONFIG_EXTRA_FIRMWARE feature requires to have the firmware full > + # path for locating firmware file. > + $(call KCONFIG_SET_OPT,CONFIG_EXTRA_FIRMWARE_DIR,"$(STAGING_DIR)/lib/firmware") Besides what Thomas already said: firmware files are not installed in STAGING_DIR/lib/firmware, but they are in TARGET_DIR/lib/frmware. Also, some people already point CONFIG_EXTRA_FIRMWARE_DIR=$(INAGES_DIR) as there are some firmware fiels copied in there already, so we do not want to force that for them. Regards, Yann E. MORIN. > $(PACKAGES_LINUX_CONFIG_FIXUPS) > endef > > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Sun Oct 30 21:24:32 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:24:32 +0100 Subject: [Buildroot] [PATCH v2] package/openvmtools: fix local privilege escalation vulnerability In-Reply-To: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> References: <7aeb69a91cab8b3e5fdcfc210c2f5a112490b0a0.1666169750.git.stefan@agner.ch> Message-ID: <20221030222432.26968da5@windsurf> Hello Stefan, On Wed, 19 Oct 2022 10:56:16 +0200 Stefan Agner wrote: > Add a patch for CVE-2022-31676 (local privilege escalation > vulnerability). > > Signed-off-by: Stefan Agner > --- > v2: Actually make the patch apply I've applied to master, but after: (1) Adding a reference to the upstream location where the patch was provided (2) Adding a OPENVMTOOLS_IGNORE_CVES entry in the .mk file to ignore the CVE now that it is fixed. According to our CVE tracking infrastructure, there are 3 other CVEs affecting openvmtools: CVE-2014-4199, CVE-2014-4200, CVE-2022-22943. Do you think you could have a look? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 21:24:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:24:54 +0100 Subject: [Buildroot] [git commit] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 Message-ID: <20221030212504.CE84687699@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=dce3617ada3ed2a1eabab2d1dc2ed0b83bdbe536 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash index ac6587b27a..fd874f1f0a 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 64f15a8c7d383ac92230ef82711507a7f3a309462999f6694863fbbb4f12e0be sunxi-mali-utgard-driver-c4cf7aabed25e0fd27159564caf588a37016870d.tar.gz +sha256 4b66f20272c63ce8ea769bf1c95f9923ed6facabe0c14a8c7644b302b9f23b58 sunxi-mali-utgard-driver-73a80d550f2f181b5fc7fc2d859e15d077d845e4.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk index 594a770e61..15d660e49d 100644 --- a/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk +++ b/package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk @@ -4,7 +4,7 @@ # ################################################################################ -SUNXI_MALI_UTGARD_DRIVER_VERSION = c4cf7aabed25e0fd27159564caf588a37016870d +SUNXI_MALI_UTGARD_DRIVER_VERSION = 73a80d550f2f181b5fc7fc2d859e15d077d845e4 SUNXI_MALI_UTGARD_DRIVER_SITE = $(call github,giuliobenetti,sunxi-mali,$(SUNXI_MALI_UTGARD_DRIVER_VERSION)) SUNXI_MALI_UTGARD_DRIVER_DEPENDENCIES = linux SUNXI_MALI_UTGARD_DRIVER_LICENSE = GPL-2.0 From thomas.petazzoni at bootlin.com Sun Oct 30 21:25:07 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:25:07 +0100 Subject: [Buildroot] [PATCH] package/sunxi-mali-utgard-driver: bump version to fix building with Linux 6.0.0 In-Reply-To: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> References: <20221012160025.45566-1-giulio.benetti@benettiengineering.com> Message-ID: <20221030222507.413e4c80@windsurf> On Wed, 12 Oct 2022 18:00:25 +0200 Giulio Benetti wrote: > Signed-off-by: Giulio Benetti > --- > package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.hash | 2 +- > package/sunxi-mali-utgard-driver/sunxi-mali-utgard-driver.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:25:19 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:25:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/motion: bump to version 4.5.0 Message-ID: <20221030212519.66340-1-fontaine.fabrice@gmail.com> https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 Signed-off-by: Fabrice Fontaine --- package/motion/motion.hash | 2 +- package/motion/motion.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/motion/motion.hash b/package/motion/motion.hash index 085ac90449..9b99256864 100644 --- a/package/motion/motion.hash +++ b/package/motion/motion.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/motion/motion.mk b/package/motion/motion.mk index 5d54ecea01..18fe0eb630 100644 --- a/package/motion/motion.mk +++ b/package/motion/motion.mk @@ -4,7 +4,7 @@ # ################################################################################ -MOTION_VERSION = 4.4.0 +MOTION_VERSION = 4.5.0 MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) MOTION_LICENSE = GPL-2.0 MOTION_LICENSE_FILES = LICENSE -- 2.35.1 From bernd.kuhls at t-online.de Sun Oct 30 21:25:29 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:25:29 +0100 Subject: [Buildroot] [PATCH 1/1] package/exim: fix typo in comment Message-ID: <20221030212529.364240-1-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- package/exim/exim.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/exim/exim.mk b/package/exim/exim.mk index e0fcd83fb0..9c54eeec44 100644 --- a/package/exim/exim.mk +++ b/package/exim/exim.mk @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value $(@D)/Local/Makefile endef -# Comment-out a variable. Has no effect if it does not exits. +# Comment-out a variable. Has no effect if it does not exist. define exim-config-unset # variable-name $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ $(@D)/Local/Makefile -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 21:28:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:28:55 +0100 Subject: [Buildroot] [git commit] package/wolftpm: bump version to v2.6.0 Message-ID: <20221030212911.C74558769E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=09779d0f6918377e77f108f27695b16c48cfd1a8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Dimitar Tomov Signed-off-by: Thomas Petazzoni --- package/wolftpm/wolftpm.hash | 3 +-- package/wolftpm/wolftpm.mk | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash index d24df58eaa..735c731a53 100644 --- a/package/wolftpm/wolftpm.hash +++ b/package/wolftpm/wolftpm.hash @@ -1,4 +1,3 @@ -# Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz # Locally calculated +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolftpm-2.6.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index 7e8a108585..f217322545 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -WOLFTPM_VERSION = 2.4.0 +WOLFTPM_VERSION = 2.6.0 WOLFTPM_SITE = $(call github,wolfSSL,wolfTPM,v$(WOLFTPM_VERSION)) WOLFTPM_INSTALL_STAGING = YES WOLFTPM_LICENSE = GPL-2.0+ From thomas.petazzoni at bootlin.com Sun Oct 30 21:29:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:29:57 +0100 Subject: [Buildroot] [PATCH 1/2] package/wolftpm: Update version to v2.6.0 In-Reply-To: <20221012075423.14729-1-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> Message-ID: <20221030222957.2d4a2e0a@windsurf> On Wed, 12 Oct 2022 10:54:22 +0300 Dimi Tomov wrote: > From: Dimitar Tomov > > This patch series bumps the wolftpm version to the latest available and > adds one new config option for controlling debug messages in wolftpm. The commit log of a patch should not describe the patch series, but just the patch itself. The commit title should be: package/wolftpm: bump to version v2.6.0 > package/wolftpm/wolftpm.hash | 2 +- > package/wolftpm/wolftpm.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/wolftpm/wolftpm.hash b/package/wolftpm/wolftpm.hash > index d24df58eaa..e256967a01 100644 > --- a/package/wolftpm/wolftpm.hash > +++ b/package/wolftpm/wolftpm.hash > @@ -1,4 +1,4 @@ > # Hash from https://github.com/wolfSSL/wolfTPM/archive/refs/tags/v2.4.0.tar.gz This link is no longer correct. And in fact it is useless. Having a link here is useful when it's a link to a hash file provided by upstream, which is not the case here. In this case, we just put "Locally calculated". > -sha256 31d1a5f5d60af14c4d07e14a9b0667404d4801fed32afd3fc0649749020ad17b wolftpm-2.4.0.tar.gz > +sha256 78331cc2d98339247857f5ceb3e7cd3c4f5773e3d81bf1d73e8df9446e37472b wolfTPM-2.6.0.tar.gz You clearly did not test this properly, as the file is not named wolfTPM-2.6.0.tar.gz but wolftpm-2.6.0.tar.gz. So a simple build fails with: ERROR: No hash found for wolftpm-2.6.0.tar.gz I've fixed those issues and applied. But the next time, instead of pinging just one day after submitting your patch... could you rather spend your time in actually testing your patch? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Sun Oct 30 21:31:37 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:31:37 +0100 Subject: [Buildroot] [git commit] package/wolftpm: add config option to enable debug output Message-ID: <20221030213223.8C9DA876B2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fada6de8b0798f896626723c3cc6a7aea4521d48 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Dimitar Tomov Signed-off-by: Thomas Petazzoni --- package/wolftpm/Config.in | 5 +++++ package/wolftpm/wolftpm.mk | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 7ebb253857..4e712d0afb 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -35,6 +35,11 @@ config BR2_PACKAGE_WOLFTPM_NUVOTON Enable support of TPM 2.0 extra functionality offered by the Nuvoton NPCT750 chip. +config BR2_PACKAGE_WOLFTPM_DEBUG + bool "Debug output" + help + Enable debug messages in wolfTPM. + comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS diff --git a/package/wolftpm/wolftpm.mk b/package/wolftpm/wolftpm.mk index f217322545..398fa668af 100644 --- a/package/wolftpm/wolftpm.mk +++ b/package/wolftpm/wolftpm.mk @@ -47,4 +47,10 @@ else WOLFTPM_CONF_OPTS += --disable-nuvoton endif +ifeq ($(BR2_PACKAGE_WOLFTPM_DEBUG),y) +WOLFTPM_CONF_OPTS += --enable-debug +else +WOLFTPM_CONF_OPTS += --disable-debug +endif + $(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Sun Oct 30 21:31:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:31:59 +0100 Subject: [Buildroot] [git commit] package/wolftpm: move Config.in comment near the option it is related to Message-ID: <20221030213223.97D43876B3@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6ad33ff4d77eee483f54add9ed9e2100d558120f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Thomas Petazzoni --- package/wolftpm/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/package/wolftpm/Config.in b/package/wolftpm/Config.in index 4e712d0afb..4ed1853bde 100644 --- a/package/wolftpm/Config.in +++ b/package/wolftpm/Config.in @@ -23,6 +23,9 @@ config BR2_PACKAGE_WOLFTPM_WOLFCRYPT encryption. Disabling this option is not recommended as it could create a security breach in most environments. +comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS + config BR2_PACKAGE_WOLFTPM_ST33 bool "ST33 extra functionality" help @@ -40,7 +43,4 @@ config BR2_PACKAGE_WOLFTPM_DEBUG help Enable debug messages in wolfTPM. -comment "wolfCrypt hooks need a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS - endif From thomas.petazzoni at bootlin.com Sun Oct 30 21:32:51 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:32:51 +0100 Subject: [Buildroot] [PATCH 2/2] package/wolftpm: Add new config option to enable debug output In-Reply-To: <20221012075423.14729-2-dimi@tpm.dev> References: <20221012075423.14729-1-dimi@tpm.dev> <20221012075423.14729-2-dimi@tpm.dev> Message-ID: <20221030223251.7eb4a4cb@windsurf> On Wed, 12 Oct 2022 10:54:23 +0300 Dimi Tomov wrote: > From: Dimitar Tomov > > Signed-off-by: Dimitar Tomov > --- > package/wolftpm/Config.in | 5 +++++ > package/wolftpm/wolftpm.mk | 6 ++++++ > 2 files changed, 11 insertions(+) I hesitated a bit between adding this new option, or using BR2_ENABLE_RUNTIME_DEBUG. In the end, I went for your proposal, a package-specific option. We'll see if other maintainers complain :-) Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 21:35:17 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:35:17 +0100 Subject: [Buildroot] [PATCH 1/1] package/arp-scan: bump to version 1.9.8 Message-ID: <20221030213517.95390-1-fontaine.fabrice@gmail.com> Update hash of COPYING (gnu.org license file used since https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog Signed-off-by: Fabrice Fontaine --- package/arp-scan/arp-scan.hash | 4 ++-- package/arp-scan/arp-scan.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash index dd97333013..b18c6ceb38 100644 --- a/package/arp-scan/arp-scan.hash +++ b/package/arp-scan/arp-scan.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk index 3fdbd463c2..73d1b99bc7 100644 --- a/package/arp-scan/arp-scan.mk +++ b/package/arp-scan/arp-scan.mk @@ -4,7 +4,7 @@ # ################################################################################ -ARP_SCAN_VERSION = 1.9.7 +ARP_SCAN_VERSION = 1.9.8 ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) ARP_SCAN_LICENSE = GPL-3.0+ ARP_SCAN_LICENSE_FILES = COPYING -- 2.35.1 From flaniel at linux.microsoft.com Sun Oct 30 21:29:32 2022 From: flaniel at linux.microsoft.com (Francis Laniel) Date: Sun, 30 Oct 2022 22:29:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/pahole: bump to version 1.24 In-Reply-To: References: <20221029082510.61178-1-fontaine.fabrice@gmail.com> <20221030215759.0d848e58@windsurf> Message-ID: <5616514.DvuYhMxLoT@pwmachine> Hi. Le dimanche 30 octobre 2022, 22:17:55 CET Fabrice Fontaine a ?crit : > Hello Thomas, > > Le dim. 30 oct. 2022 ? 21:58, Thomas Petazzoni > > a ?crit : > > Hello Fabrice, > > > > On Sat, 29 Oct 2022 10:25:10 +0200 > > > > Fabrice Fontaine wrote: > > > https://git.kernel.org/pub/scm/devel/pahole/pahole.git/tree/NEWS?h=v1.24 > > > > > > Signed-off-by: Fabrice Fontaine > > > > We have zillions of build failures for host-pahole: > > http://autobuild.buildroot.net/?reason=host-pahole% Sorry for the disturbance. > > Is this version bump fixing them? If not, do we have an idea on how to > > fix this build issue (I didn't investigated myself)? > > Nope, this version bump will not fix these build failures. I tried to > investigate but I wasn't able to reproduce it locally on my machine. > These build failures are mostly raised by your autobuilder. > > My assumption is that your kernel is probably too old, bpf_link_type is > only available since version 5.8 and > https://github.com/torvalds/linux/commit/f2e10bff16a0fdd41ba278c84da9813700e > 356af > > However, I don't know how to add this dependency to host-pahole (and > host-libbpf). I proposed this patch set: https://lore.kernel.org/buildroot/20220610165441.84812-1-flaniel at linux.microsoft.com/ to fix the build failures. As pointed above, I am also not able to reproduce locally and I do not have access to an autobuilder setup (or I do not know how I can mimic one) to investigate on it. Do you think the above patch can do the trick? If not, is it possible to deploy locally an autobuilder to check if I can reproduce the problem and propose a correct patch? > > Thanks! > > > > Thomas > > -- > > Thomas Petazzoni, co-owner and CEO, Bootlin > > Embedded Linux and Kernel engineering and training > > https://bootlin.com > > Best Regards, > > Fabrice Best regards and thank you in advance. From bernd.kuhls at t-online.de Sun Oct 30 21:37:43 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:37:43 +0100 Subject: [Buildroot] [PATCH 1/1] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 Message-ID: <20221030213743.943645-1-bernd.kuhls@t-online.de> - libuv Release notes: https://github.com/libuv/libuv/issues/3452 https://github.com/libuv/libuv/issues/3522 https://github.com/libuv/libuv/issues/3586 Updated license hash due to various commits regarding Android/Windows. - uvw: Updated license hash due to copyright year bump: https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 Signed-off-by: Bernd Kuhls --- package/libuv/libuv.hash | 4 ++-- package/libuv/libuv.mk | 2 +- package/uvw/uvw.hash | 4 ++-- package/uvw/uvw.mk | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash index 1874aa344c..b0fa0ff5be 100644 --- a/package/libuv/libuv.hash +++ b/package/libuv/libuv.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk index ed51fc92f9..c169b76a6a 100644 --- a/package/libuv/libuv.mk +++ b/package/libuv/libuv.mk @@ -6,7 +6,7 @@ # When bumping libuv, check if a new version of uvw is available # and bump it too. -LIBUV_VERSION = 1.43.0 +LIBUV_VERSION = 1.44.2 LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) LIBUV_DEPENDENCIES = host-pkgconf LIBUV_INSTALL_STAGING = YES diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash index 564c0980f3..a0c74bbe05 100644 --- a/package/uvw/uvw.hash +++ b/package/uvw/uvw.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk index 161c40849d..b6c2135d6f 100644 --- a/package/uvw/uvw.mk +++ b/package/uvw/uvw.mk @@ -4,7 +4,7 @@ # ################################################################################ -UVW_VERSION = 2.11.0_libuv_v1.43 +UVW_VERSION = 2.12.1_libuv_v1.44 UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) UVW_INSTALL_STAGING = YES UVW_INSTALL_TARGET = NO -- 2.34.1 From bernd.kuhls at t-online.de Sun Oct 30 21:48:49 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Sun, 30 Oct 2022 22:48:49 +0100 Subject: [Buildroot] [PATCH 1/1] package/pixman: fix powerpc64le build References: <20220708142150.234611-1-bernd.kuhls__17925.5718061299$1657290142$gmane$org@t-online.de> Message-ID: Am Fri, 8 Jul 2022 16:21:50 +0200 schrieb Bernd Kuhls: > Disable vmx support to fix build error: > > pixman-vmx.c:268:5: note: in expansion of macro 'LOAD_VECTOR' > 268 | LOAD_VECTOR (src); > | ^~~~~~~~~~~ > pixman-vmx.c:268:5: error: cannot convert a value of type 'int' to > vector type '__vector(4) unsigned int' which has different size > > Fixes: > http://autobuild.buildroot.net/results/ fda886768fce25ccd9b52b635ff5b13da7ba2d0c/ Marked as "Handled Elsewhere" in patchworks due to https://git.buildroot.net/buildroot/commit/? id=fdb23693a4bff5e9e9472738a0278ae0b13411e0 Regards, Bernd From fontaine.fabrice at gmail.com Sun Oct 30 21:50:45 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:50:45 +0100 Subject: [Buildroot] [PATCH 1/2] package/exfatprogs: drop host-pkgconf dependency Message-ID: <20221030215046.461380-1-fontaine.fabrice@gmail.com> host-pkgconf is not a dependency since bump to version 1.0.3 in commit fbad745139125ea0995a436fd81ce7ea233638c0 and https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced Signed-off-by: Fabrice Fontaine --- package/exfatprogs/exfatprogs.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 2911d21f4f..44679c7d60 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ EXFATPROGS_LICENSE_FILES = COPYING -EXFATPROGS_DEPENDENCIES = host-pkgconf -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf $(eval $(autotools-package)) $(eval $(host-autotools-package)) -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 21:50:46 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:50:46 +0100 Subject: [Buildroot] [PATCH 2/2] package/exfatprogs: bump to version 1.2.0 In-Reply-To: <20221030215046.461380-1-fontaine.fabrice@gmail.com> References: <20221030215046.461380-1-fontaine.fabrice@gmail.com> Message-ID: <20221030215046.461380-2-fontaine.fabrice@gmail.com> https://github.com/exfatprogs/exfatprogs/releases/tag/1.2.0 Signed-off-by: Fabrice Fontaine --- package/exfatprogs/exfatprogs.hash | 4 ++-- package/exfatprogs/exfatprogs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/exfatprogs/exfatprogs.hash b/package/exfatprogs/exfatprogs.hash index 99f57c9deb..49135b1da7 100644 --- a/package/exfatprogs/exfatprogs.hash +++ b/package/exfatprogs/exfatprogs.hash @@ -1,5 +1,5 @@ -# From https://github.com/exfatprogs/exfatprogs/releases/download/1.1.3/exfatprogs-1.1.3.tar.xz.sha256 -sha256 3dbd74b60eec18d2c68d57be4a872d7baa4f7d848e669e31159452ef5245b809 exfatprogs-1.1.3.tar.xz +# From https://github.com/exfatprogs/exfatprogs/releases/download/1.2.0/exfatprogs-1.2.0.tar.xz.sha256 +sha256 56d9a49465deafc367d428afc71c8098705a30ee19a3cdf3c5320650b8880742 exfatprogs-1.2.0.tar.xz # Hash for license file sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 44679c7d60..d755c7a214 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXFATPROGS_VERSION = 1.1.3 +EXFATPROGS_VERSION = 1.2.0 EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ -- 2.35.1 From fontaine.fabrice at gmail.com Sun Oct 30 21:52:01 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 22:52:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/cups-pk-helper: bump to version 0.2.7 Message-ID: <20221030215201.463000-1-fontaine.fabrice@gmail.com> Switch to meson-package https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS Signed-off-by: Fabrice Fontaine --- package/cups-pk-helper/cups-pk-helper.hash | 3 ++- package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash index 18fe789389..75c5a5ffda 100644 --- a/package/cups-pk-helper/cups-pk-helper.hash +++ b/package/cups-pk-helper/cups-pk-helper.hash @@ -1,3 +1,4 @@ +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz # Locally computed: -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk index c688743160..2bd00c6912 100644 --- a/package/cups-pk-helper/cups-pk-helper.mk +++ b/package/cups-pk-helper/cups-pk-helper.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_PK_HELPER_VERSION = 0.2.6 +CUPS_PK_HELPER_VERSION = 0.2.7 CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz CUPS_PK_HELPER_LICENSE = GPL-2.0+ @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit -$(eval $(autotools-package)) +$(eval $(meson-package)) -- 2.35.1 From james.hilliard1 at gmail.com Sun Oct 30 21:54:58 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 15:54:58 -0600 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build Message-ID: <20221030215458.3773991-1-james.hilliard1@gmail.com> Backport an upstream patch to fix a crash during kernel build. Details: https://bugs.gentoo.org/868567 Fixes: GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c free(): double free detected in tcache 2 Aborted Signed-off-by: James Hilliard --- .../0002-Fix-a-bug-with-Node_elem_new.patch | 155 ++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch new file mode 100644 index 0000000000..502f7dcd95 --- /dev/null +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -0,0 +1,155 @@ +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 +From: "Arnold D. Robbins" +Date: Wed, 14 Sep 2022 21:08:59 +0300 +Subject: [PATCH] Fix a bug with Node_elem_new. + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +baab183439ff4e0c6b77d62156d447e61fc1dcfb] +--- + ChangeLog | 8 ++++++++ + interpret.h | 1 + + test/ChangeLog | 5 +++++ + test/Makefile.am | 4 +++- + test/Makefile.in | 9 ++++++++- + test/Maketests | 5 +++++ + test/elemnew1.awk | 9 +++++++++ + test/elemnew1.ok | 0 + 8 files changed, 39 insertions(+), 2 deletions(-) + create mode 100644 test/elemnew1.awk + create mode 100644 test/elemnew1.ok + +diff --git a/ChangeLog b/ChangeLog +index 5fb25483..cd9d9fcd 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,11 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * interpret.h (r_interpret): For the `push' opcodes, upref ++ the Node_elem_new. See test case elemnew1. Thanks to ++ Emanuel Attila Czirai for the report, ++ and to Jan Alexander Steffens (heftig)" ++ for the fix. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/interpret.h b/interpret.h +index 57d060e6..268655b2 100644 +--- a/interpret.h ++++ b/interpret.h +@@ -238,6 +238,7 @@ uninitialized_scalar: + _("reference to uninitialized argument `%s'") : + _("reference to uninitialized variable `%s'"), + save_symbol->vname); ++ UPREF(m); + PUSH(m); + break; + +diff --git a/test/ChangeLog b/test/ChangeLog +index a73637bf..ea08edee 100644 +--- a/test/ChangeLog ++++ b/test/ChangeLog +@@ -1,3 +1,8 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. ++ * elemnew1.awk, elemnew1.ok: New files. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/test/Makefile.am b/test/Makefile.am +index ab06974c..8a5c3c49 100644 +--- a/test/Makefile.am ++++ b/test/Makefile.am +@@ -282,6 +282,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +diff --git a/test/Makefile.in b/test/Makefile.in +index 834feb09..a4fb1cc1 100644 +--- a/test/Makefile.in ++++ b/test/Makefile.in +@@ -550,6 +550,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +@@ -4476,6 +4478,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/Maketests b/test/Maketests +index 3a667af8..90828e7f 100644 +--- a/test/Maketests ++++ b/test/Maketests +@@ -1432,6 +1432,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/elemnew1.awk b/test/elemnew1.awk +new file mode 100644 +index 00000000..58dc9fcd +--- /dev/null ++++ b/test/elemnew1.awk +@@ -0,0 +1,9 @@ ++function add_flags(old) { ++ if (old) ++ return 0 ++ if (!old) ++ return 1 ++} ++BEGIN { ++ a[0]=add_flags(a[0]) ++} +diff --git a/test/elemnew1.ok b/test/elemnew1.ok +new file mode 100644 +index 00000000..e69de29b +-- +2.34.1 + -- 2.34.1 From thomas.petazzoni at bootlin.com Sun Oct 30 22:00:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:00:34 +0100 Subject: [Buildroot] [git commit] package/mdevd: bump to v0.1.6.0 Message-ID: <20221030220110.0FB6F876C0@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c8206cdb1cb8efe5046dfd59ad1f468000b0eecb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.1. - execline optional dependency bumped to 2.9.0.1. - New -O nlgroups option to mdevd, rebroadcasting uevents to the netlink after handling them. - The * and & action directives are now triggered by all action types. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/mdevd/mdevd.hash | 4 ++-- package/mdevd/mdevd.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/mdevd/mdevd.hash b/package/mdevd/mdevd.hash index 93950304be..dea2f14978 100644 --- a/package/mdevd/mdevd.hash +++ b/package/mdevd/mdevd.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 ffd3b223b4cf0e51253b4a8f09cb88d70bf22693228ab0818af174a3f099dcd2 mdevd-0.1.4.0.tar.gz -sha256 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995 COPYING +sha256 33cf2b118634538fd24f302b30f52cc8aa28ea68b414916ce482b54a4ee57283 mdevd-0.1.6.0.tar.gz +sha256 7fe938b5e0fec18848955ca8081c532e24ae77310beb730b301e1f77bad3d390 COPYING diff --git a/package/mdevd/mdevd.mk b/package/mdevd/mdevd.mk index a0cd71e76e..9997cb5275 100644 --- a/package/mdevd/mdevd.mk +++ b/package/mdevd/mdevd.mk @@ -4,7 +4,7 @@ # ################################################################################ -MDEVD_VERSION = 0.1.4.0 +MDEVD_VERSION = 0.1.6.0 MDEVD_SITE = http://skarnet.org/software/mdevd MDEVD_LICENSE = ISC MDEVD_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 21:34:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 22:34:59 +0100 Subject: [Buildroot] [git commit] package/skalibs: bump to v2.12.0.1 Message-ID: <20221030220110.0576F876BF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0f7bfc80814e90918b9527cab4cbf6afedd22195 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: New: - New djbunix functions: waitn_posix(), waitn_reap_posix() - New unix-transactional.h function: opendir_at. - New skalibs/posixplz.h function: munmap_void(). - random functions now have an early version, to use when randomness is required before the generator can be seeded (i.e. in programs running in the very early boot). - envdir_internal() now has a SKALIBS_ENVDIR_NOCLAMP option allowing reading of unlimited-size variables. - fd_close() now chooses to adapt to Linux's close() behaviour (closing the fd on EINTR) over the HP-UX one (not closing it). Destructors like close() being allowed to fail has always been a mistake in the specification and a programming nightmare, making it impossible to behave correctly on all systems, but apparently standardization efforts are on the way and the Linux behaviour seems to be the chosen one. Removed: - libbiguint removed. - Obsolete skalibs/environ.h and skalibs/getpeereid.h headers removed. - rc4 and md5 functions removed. - iobuffer removed. fd_cat() and fd_catn() changed signatures. - All signal functions entirely reworked; cruft removed. - The unsafe cdb_successor() API has been removed. - random_init() and random_finish() removed, as well as random_char(). Renamed APIs and type: - random_string() renamed to random_buf(). - All *_t types renamed without the _t suffix, to preserve POSIX namespace. - subgetopt() renamed to lgetopt(). - skalibs/cdb_make.h renamed to skalibs/cdbmake.h; cdbmake functions now return 1 on success and 0 on failure. - skalibs/cdb.h redesigned to remove reader state from the cdb structure. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/skalibs/skalibs.hash | 4 ++-- package/skalibs/skalibs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/skalibs/skalibs.hash b/package/skalibs/skalibs.hash index 48e4028edc..dd202b97fb 100644 --- a/package/skalibs/skalibs.hash +++ b/package/skalibs/skalibs.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 b780b0ae650dda0c3ec5f8975174998af2d24c2a2e2be669b1bab46e73b1464d skalibs-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 3e228f72f18d88c17f6c4e0a66881d6d3779427b7e7e889f3142b6f26da30285 skalibs-2.12.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/skalibs/skalibs.mk b/package/skalibs/skalibs.mk index 77db57de96..0ff449a5ba 100644 --- a/package/skalibs/skalibs.mk +++ b/package/skalibs/skalibs.mk @@ -4,7 +4,7 @@ # ################################################################################ -SKALIBS_VERSION = 2.10.0.3 +SKALIBS_VERSION = 2.12.0.1 SKALIBS_SITE = http://skarnet.org/software/skalibs SKALIBS_LICENSE = ISC SKALIBS_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 30 22:11:21 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:11:21 +0100 Subject: [Buildroot] [PATCH 1/1] package/igmpproxy: bump to version 0.4 Message-ID: <20221030221121.474743-1-fontaine.fabrice@gmail.com> https://github.com/pali/igmpproxy/releases/tag/0.4 Signed-off-by: Fabrice Fontaine --- package/igmpproxy/igmpproxy.hash | 2 +- package/igmpproxy/igmpproxy.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash index 238de67e88..a7e1a065d9 100644 --- a/package/igmpproxy/igmpproxy.hash +++ b/package/igmpproxy/igmpproxy.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk index 6a6b56afa0..357c9087e0 100644 --- a/package/igmpproxy/igmpproxy.mk +++ b/package/igmpproxy/igmpproxy.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGMPPROXY_VERSION = 0.3 +IGMPPROXY_VERSION = 0.4 IGMPPROXY_SITE = \ https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) IGMPPROXY_AUTORECONF = YES -- 2.35.1 From ricardo.martincoski at gmail.com Sun Oct 30 22:17:47 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:17:47 -0300 Subject: [Buildroot] [PATCH 1/3] support/testing: replace nose2 with pytest - Dockerfile References: <20221021091531.2989489-1-oguz.ozhan@mind.be> Message-ID: <635ef80b8245f_3fcfb2ad92177830821937@xultri.mail> Hello, I am not against to switch to pytest. But I didn't understand clearly yet the use case that motivated this series, in which nose2 is not good and pytest is better. Could you elaborate? Also, there are issues to be addressed before merging this series: - the detection of a failed test on GitLab CI is broken, even tests failing return exit code 0, so GitLab infra mark them as PASS, see [1]; - run-tests -s is broken (does not show the build and runtime console); - support to ask a single runtime test to run on GitLab CI is broken due to a regexp that needs to be adapted; - the manual needs to be updated. There are also some changes in behavior that would be nice to be highlighted: - someone willing to find a test in the output of run-tests -l can do: nose2: run-tests -l 2>&1 | grep pattern pytest: run-tests -l | grep pattern - total number of tests: nose2: run-tests -l prints the number of tests at the end "Ran 481 tests" pytest: run-tests -l does not - the name of tests change (list) nose2: test_run (tests.toolchain.test_external_bootlin.\ TestExternalToolchainBootlinPowerpc64lepower8GlibcBleedingEdge) ... ok pytest: support/testing/tests/toolchain/test_external_bootlin.py::\ TestExternalToolchainBootlinPowerpc64lepower8GlibcBleedingEdge::test_run - the name of tests change (local run) nose2: support/testing/run-tests tests.init.test_busybox \ tests.package.test_php_lua.TestPhpLuaLuajit pytest: support/testing/run-tests support/testing/tests/init/test_busybox.py \ support/testing/tests/package/test_php_lua.py::TestPhpLuaLua - the name of tests change (gitlab test suite) nose2: git push gitlab HEAD:foo-tests.init.test_busybox see [2] pytest: git push gitlab HEAD:foo-support/testing/tests/init/test_busybox.py see [3] - the name of tests change (gitlab test case) nose2: git push gitlab HEAD:foo-tests.package.test_php_lua.TestPhpLuaLuajit see [4] pytest: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py--TestPhpLuaLuajit see [5] NOTICE: the use of '--' is just the first solution that came to mind. - the name of tests are longer, so in the GitLab CI the display is a bit worse: nose2: tests.init.test_busybox.TestInitSystemBusyboxRo tests.init.test_busybox.TestInitSystemBusybox... tests.init.test_busybox.TestInitSystemBusybox... tests.init.test_busybox.TestInitSystemBusybox... tests.package.test_php_lua.TestPhpLuaLua tests.package.test_php_lua.TestPhpLuaLuajit pytest: support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/init/test_busybox.py::Tes... support/testing/tests/package/test_php_lua.p... support/testing/tests/package/test_php_lua.p... - bash completion for the name of a test suite nose2: no completion support/testing/run-tests tests.init.test_busybox pytest: since it uses the path as the begin of test name one can type 'support/testing/run-tests support/testing' and use bash completion for test files names: support/testing/run-tests support/testing/tests/init/test_busybox.py - cache of results nose2: no cache pytest: it creates a .pytest_cache/ with a cache of the results, so we could later expose another parameter in run-tests that passes '-lf' to pytest, which will re-run only the tests that failed on last run - verbosity when collecting tests: nose2: no output pytest: prints a summary 'collected 1 item' 'pytest-parallel: 1 worker (process), 1 test per worker (thread)' - verbosity while tests are running: nose2: show states for each test (Starting, Building) pytest: shows nothing before each test ends - verbosity when tests fail: nose2: verbose pytest: more verbose than nose2 - verbosity when tests pass: nose2: show states for each test (Starting, Building) pytest: show only a '.' for each test [1] https://gitlab.com/RicardoMartincoski/buildroot/-/jobs/3248620433 [2] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680878149 [3] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680879324 [4] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680879308 [5] https://gitlab.com/RicardoMartincoski/buildroot/-/pipelines/680878335 Regards, Ricardo From ricardo.martincoski at gmail.com Sun Oct 30 22:20:04 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:20:04 -0300 Subject: [Buildroot] [PATCH 2/3] support/testing: replace nose2 with pytest - run-tests References: <20221021091531.2989489-2-oguz.ozhan@mind.be> Message-ID: <635ef894b4558_3fcfb2ad9212def90221e8@xultri.mail> Hello, On Fri, Oct 21, 2022 at 06:15 AM, Oguz Ozhan wrote: > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 > > - Changes in this patch: > - run-tests modified to use pytest instead of nose2 to call tests. A corresponding Collector class added for pytest to list the available tests > - nose2 plugins removed which are not required anymore > - in test_iso9660.py, local test_ routine names changed to not be accepted as test_ cases via pytest Please split the changes to the tests in a new patch (first in the series). While doing that, please fix flake8 warnings. > > Signed-off-by: Oguz Ozhan > --- > support/testing/conf/unittest.cfg | 3 -- > support/testing/run-tests | 28 ++++++++++------- Please fix flake8 warnings for run-tests as well. > support/testing/tests/fs/test_iso9660.py | 40 ++++++++++++------------ > 3 files changed, 36 insertions(+), 35 deletions(-) Please update the manual, section 'Using the runtime tests framework', in the same commit that changes run-tests to use pytest. [snip] > @@ -106,15 +110,15 @@ def main(): > return 1 > BRConfigTest.timeout_multiplier = args.timeout_multiplier > > - nose2_args = ["-v", > - "-N", str(args.testcases), > - "-s", test_dir, > + pytest_args = ["--workers", str(args.testcases), > + "--rootdir", test_dir, > "-c", os.path.join(test_dir, "conf/unittest.cfg")] run-tests -s is broken: it does not show the build and runtime console > > if args.testname: > - nose2_args += args.testname > + pytest_args += args.testname > + > + pytest.main(pytest_args) > > - nose2.discover(argv=nose2_args) The detection of a failed test on GitLab CI is broken, even when tests fail run-tests returns exit code 0. Regards, Ricardo From ricardo.martincoski at gmail.com Sun Oct 30 22:20:51 2022 From: ricardo.martincoski at gmail.com (Ricardo Martincoski) Date: Sun, 30 Oct 2022 19:20:51 -0300 Subject: [Buildroot] [PATCH 3/3] support/testing: replace nose2 with pytest - CI References: <20221021091531.2989489-3-oguz.ozhan@mind.be> Message-ID: <635ef8c3d5fea_3fcfb2ad9217830c8223a2@xultri.mail> Hello, IMO, this change should be merged into patch 2. On Fri, Oct 21, 2022 at 06:15 AM, Oguz Ozhan wrote: > - From web page of nose2: > (https://docs.nose2.io/en/latest/) > nose2 vs pytest: > - pytest is an excellent test framework and we encourage users to consider it for new projects. > - It has a bigger team of maintainers and a larger community of users. > > - pytest is more robust and has more ability compared to nose2 > > - Changes in this patch: > - the sed command was fine filtering the tests list with nose2 output but removing all operating on pytest output. With pytest no fine filtering is required to get the test names in correct format. > > Signed-off-by: Oguz Ozhan > --- > support/scripts/generate-gitlab-ci-yml | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/support/scripts/generate-gitlab-ci-yml b/support/scripts/generate-gitlab-ci-yml > index aa43aac019..bb4dcbbb22 100755 > --- a/support/scripts/generate-gitlab-ci-yml > +++ b/support/scripts/generate-gitlab-ci-yml > @@ -31,7 +31,6 @@ gen_tests() { > defconfigs=( $(cd configs; LC_ALL=C ls -1 *_defconfig) ) > > runtimes=( $(./support/testing/run-tests -l 2>&1 \ > - | sed -r -e '/^test_run \((.*)\).*/!d; s//\1/' \ > | LC_ALL=C sort) > ) > > @@ -80,7 +79,6 @@ gen_tests() { > ;; > (*-tests.*) This regexp must be adapted, something like this: (*-support*) pattern="${CI_COMMIT_REF_NAME/--/::}" runtimes=( $(./support/testing/run-tests -l 2>&1 \ | LC_ALL=C sort \ | grep "^${pattern##*-}") Notice that ':' is not accepted on git branches, so we cannot use this branch name to run a single test on GitLab CI: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py::TestPhpLuaLuajit so I guess we could use a pattern substitution, for instance: git push gitlab \ HEAD:foo-support/testing/tests/package/test_php_lua.py--TestPhpLuaLuajit and document it in the manual. The manual must also be updated. docs/manual/contribute.txt: $ git push gitlab HEAD:foo-tests.init.test_busybox docs/manual/contribute.txt: $ git push gitlab HEAD:foo-tests.init Regards, Ricardo From thomas.petazzoni at bootlin.com Sun Oct 30 22:24:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:24:05 +0100 Subject: [Buildroot] [git commit] package/execline: bump to v2.9.0.1 Message-ID: <20221030222427.8B7C6876C7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8dd62133a771ecdd73a4ffab5ff7bba60ccb4bc3 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - New options to wait: -o to wait for one of the listed processes, and -a to get the default behaviour. - wait now exits 99 on timeout. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/execline/execline.hash | 4 ++-- package/execline/execline.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/execline/execline.hash b/package/execline/execline.hash index 706b131afd..1d72e2cb49 100644 --- a/package/execline/execline.hash +++ b/package/execline/execline.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a373f497d2335905d750e2f3be2ba47a028c11c4a7d5595dca9965c161e53aed execline-2.8.0.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 01260fcaf80ffbca2a94aa55ea474dfb9e39b3033b55c8af88126791879531f6 execline-2.9.0.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/execline/execline.mk b/package/execline/execline.mk index c348d924b7..38f4570ba4 100644 --- a/package/execline/execline.mk +++ b/package/execline/execline.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXECLINE_VERSION = 2.8.0.1 +EXECLINE_VERSION = 2.9.0.1 EXECLINE_SITE = http://skarnet.org/software/execline EXECLINE_LICENSE = ISC EXECLINE_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:25:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:25:11 +0100 Subject: [Buildroot] [git commit] package/s6: bump to v2.11.1.2 Message-ID: <20221030222630.A6892876CD@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=80b1d93d8b783e59ae65a0940e74955dbef3f462 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - execline optional dependency bumped to 2.9.0.1. - skalibs dependency bumped to 2.12.0.0. - nsss optional dependency bumped to 0.2.0.1. - s6-svwait now supports the -r and -R options, to wait for service restarts. - The s6/lock.h, s6/supervise.h and s6/fdholder.h headers replace their previous versions that had an extra s6 prefix. - New binaries: s6-svlink, s6-svunlink, and s6-socklog. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6/s6.hash | 4 ++-- package/s6/s6.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6/s6.hash b/package/s6/s6.hash index a829700d97..3c5ce4265a 100644 --- a/package/s6/s6.hash +++ b/package/s6/s6.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 1d21373151704150df0e8ed199f097f6ee5d2befb9a68aca4f20f3862e5d8757 s6-2.10.0.3.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c1474be3e889dac392cee307abe015cd4be0c85c725c84ea7f184f0e34503a2 s6-2.11.1.2.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6/s6.mk b/package/s6/s6.mk index ead82d7eaf..78962ed159 100644 --- a/package/s6/s6.mk +++ b/package/s6/s6.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_VERSION = 2.10.0.3 +S6_VERSION = 2.11.1.2 S6_SITE = http://skarnet.org/software/s6 S6_LICENSE = ISC S6_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:28:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:28:41 +0100 Subject: [Buildroot] [git commit] package/s6-portable-utils: bump to v2.2.5.0 Message-ID: <20221030222858.295DA876DB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bd506eb2c8e910f845f311a245eed7a85b7229da branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-portable-utils/s6-portable-utils.hash | 4 ++-- package/s6-portable-utils/s6-portable-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-portable-utils/s6-portable-utils.hash b/package/s6-portable-utils/s6-portable-utils.hash index dd9f7df4bd..aa38c8b5da 100644 --- a/package/s6-portable-utils/s6-portable-utils.hash +++ b/package/s6-portable-utils/s6-portable-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 6627a2d3ea263539e83512a36f10a587fa0dd5e899bc3612187e9e3b9faf769c s6-portable-utils-2.2.3.2.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 ebb39f8934fd36f25d31352e61bbd94dc02b1e9f04411850d2fd9658bd916e36 s6-portable-utils-2.2.5.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-portable-utils/s6-portable-utils.mk b/package/s6-portable-utils/s6-portable-utils.mk index fb910320ea..8cdb4fa965 100644 --- a/package/s6-portable-utils/s6-portable-utils.mk +++ b/package/s6-portable-utils/s6-portable-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_PORTABLE_UTILS_VERSION = 2.2.3.2 +S6_PORTABLE_UTILS_VERSION = 2.2.5.0 S6_PORTABLE_UTILS_SITE = http://skarnet.org/software/s6-portable-utils S6_PORTABLE_UTILS_LICENSE = ISC S6_PORTABLE_UTILS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:27:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:27:17 +0100 Subject: [Buildroot] [git commit] package/s6-linux-utils: bump to v2.6.0.0 Message-ID: <20221030222858.1FC66876DA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5aac1d0105a73133fd886acc6c5195ca28f7e17f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - s6-fillurandompool has been replaced with the new rngseed program. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-linux-utils/s6-linux-utils.hash | 4 ++-- package/s6-linux-utils/s6-linux-utils.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-linux-utils/s6-linux-utils.hash b/package/s6-linux-utils/s6-linux-utils.hash index 27e7eb7b7a..c932a4363a 100644 --- a/package/s6-linux-utils/s6-linux-utils.hash +++ b/package/s6-linux-utils/s6-linux-utils.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 c300dbf36b533083f82c6827830c55ce34bfc6cd493c782f207d199669a345ba s6-linux-utils-2.5.1.5.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 6c7132734a0c8287002ee6910c469f175a97d766a8023c0c33af8ba92643ed59 s6-linux-utils-2.6.0.0.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-linux-utils/s6-linux-utils.mk b/package/s6-linux-utils/s6-linux-utils.mk index 995ff1b855..ffa3ffac5b 100644 --- a/package/s6-linux-utils/s6-linux-utils.mk +++ b/package/s6-linux-utils/s6-linux-utils.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_LINUX_UTILS_VERSION = 2.5.1.5 +S6_LINUX_UTILS_VERSION = 2.6.0.0 S6_LINUX_UTILS_SITE = http://skarnet.org/software/s6-linux-utils S6_LINUX_UTILS_LICENSE = ISC S6_LINUX_UTILS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:29:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:29:34 +0100 Subject: [Buildroot] [git commit] package/s6-dns: bump to v2.3.5.4 Message-ID: <20221030223042.62BBA876EB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=0773fad16c39b383312deec2f35f7fd626ac9cb4 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-dns/s6-dns.hash | 4 ++-- package/s6-dns/s6-dns.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-dns/s6-dns.hash b/package/s6-dns/s6-dns.hash index c63e96e129..5083024520 100644 --- a/package/s6-dns/s6-dns.hash +++ b/package/s6-dns/s6-dns.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 0c1d50e5d7bc65cbf59b6f37fbd7f6f5645694224bb8c4dc1943d7921bc74f63 s6-dns-2.3.5.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 76af222472c4754f83cdc59ad354255ce1b1e6f6833a059328463f8e51f4db43 s6-dns-2.3.5.4.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-dns/s6-dns.mk b/package/s6-dns/s6-dns.mk index dfde2c29f1..1b7d65570f 100644 --- a/package/s6-dns/s6-dns.mk +++ b/package/s6-dns/s6-dns.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_DNS_VERSION = 2.3.5.1 +S6_DNS_VERSION = 2.3.5.4 S6_DNS_SITE = http://skarnet.org/software/s6-dns S6_DNS_LICENSE = ISC S6_DNS_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:30:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:30:26 +0100 Subject: [Buildroot] [git commit] package/s6-networking: bump to v2.5.1.1 Message-ID: <20221030223042.736DB876EC@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1a236c99f4ec2f52fa2baefe5a21190ab623cfc7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0 - s6-dns dependency bumped to 2.3.5.4 - skalibs dependency bumped to 2.11.1.0 - execline optional dependency bumped to 2.8.2.0 - s6 dependency bumped to 2.11.0.1 - The obsolete minidentd program has been removed. - LibreSSL optional dependency bumped to 3.3.4 - LibreTLS optional dependency bumped to 3.3.4 - Client certificates are now properly supported in s6-tlsd-io. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-networking/s6-networking.hash | 4 ++-- package/s6-networking/s6-networking.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-networking/s6-networking.hash b/package/s6-networking/s6-networking.hash index 9e333866d3..1890f95221 100644 --- a/package/s6-networking/s6-networking.hash +++ b/package/s6-networking/s6-networking.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 a3fbca789dc5c82b3055fdbd2f55110902198f3136447617ce8f8b79fa8aa554 s6-networking-2.4.1.1.tar.gz -sha256 adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec COPYING +sha256 7ac79d4de3d9c13532e444ab7497c4e04ad0fa7229d502984d9dc7d48aa64418 s6-networking-2.5.1.1.tar.gz +sha256 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754 COPYING diff --git a/package/s6-networking/s6-networking.mk b/package/s6-networking/s6-networking.mk index 03807f0652..f740f22635 100644 --- a/package/s6-networking/s6-networking.mk +++ b/package/s6-networking/s6-networking.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_NETWORKING_VERSION = 2.4.1.1 +S6_NETWORKING_VERSION = 2.5.1.1 S6_NETWORKING_SITE = http://skarnet.org/software/s6-networking S6_NETWORKING_LICENSE = ISC S6_NETWORKING_LICENSE_FILES = COPYING From fontaine.fabrice at gmail.com Sun Oct 30 22:34:40 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:34:40 +0100 Subject: [Buildroot] [PATCH 1/1] package/log4cxx: bump to version 0.13.0 Message-ID: <20221030223440.678755-1-fontaine.fabrice@gmail.com> Drop patch which was merged: https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 and updated: https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 Signed-off-by: Fabrice Fontaine --- ...nly-check-for-boost-if-really-needed.patch | 36 ------------------- package/log4cxx/log4cxx.hash | 4 +-- package/log4cxx/log4cxx.mk | 2 +- 3 files changed, 3 insertions(+), 39 deletions(-) delete mode 100644 package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch deleted file mode 100644 index 7df29ea120..0000000000 --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 28 Jan 2022 13:11:01 +0100 -Subject: [PATCH] boost-fallback: only check for boost if really needed - -- only check for boost if really needed (in case of legacy c++ standard < c++17) - -Signed-off-by: Peter Seiderer ---- - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake -index 8285b0b9..0ecf8c6c 100644 ---- a/src/cmake/boost-fallback/boost-fallback.cmake -+++ b/src/cmake/boost-fallback/boost-fallback.cmake -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") - -+# search for boost only in case needed for legacy c++ standard < c++17 -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) - find_package(Boost COMPONENTS thread) - if( ${Boost_FOUND} ) - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") - endif( ${Boost_FOUND} ) -+endif() - - # Link the target with the appropriate boost libraries(if required) - function(boostfallback_link target) --- -2.34.1 - diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash index 12633c8e57..8190f94aa3 100644 --- a/package/log4cxx/log4cxx.hash +++ b/package/log4cxx/log4cxx.hash @@ -1,4 +1,4 @@ -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz # Locally computed sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk index d20cc792a6..f50267d737 100644 --- a/package/log4cxx/log4cxx.mk +++ b/package/log4cxx/log4cxx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LOG4CXX_VERSION = 0.12.1 +LOG4CXX_VERSION = 0.13.0 LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz LOG4CXX_INSTALL_STAGING = YES -- 2.35.1 From thomas.petazzoni at bootlin.com Sun Oct 30 22:38:57 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:38:57 +0100 Subject: [Buildroot] [git commit] package/s6-rc: bump to v0.5.3.2 Message-ID: <20221030223916.38B7D876F2@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=3b27e969fd75018b3df0a01d4e5d6bc67db562af branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Summary of changes: - skalibs dependency bumped to 2.12.0.0. - execline dependency bumped to 2.9.0.0. - s6 dependency bumped to 2.11.1.0. - s6-rc-compile now reads service dependency information from the dependencies.d directory and bundle information from the contents.d directory, instead of the dependencies and contents flat files. The old format is still supported, but deprecated. License hash updated due to copyright year change. Signed-off-by: Joachim Wiberg Signed-off-by: Thomas Petazzoni --- package/s6-rc/s6-rc.hash | 4 ++-- package/s6-rc/s6-rc.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/s6-rc/s6-rc.hash b/package/s6-rc/s6-rc.hash index 8978d68ba6..0a84345e36 100644 --- a/package/s6-rc/s6-rc.hash +++ b/package/s6-rc/s6-rc.hash @@ -1,3 +1,3 @@ # Locally generated -sha256 2a8d1cd455c05c8502b34517cfe79841aa46d08ad969076b37a15d3910617f89 s6-rc-0.5.2.2.tar.gz -sha256 4a5e44a69d649f0c37b29d7f6e5df1bb292b09898247be07f0c97814dac4b15d COPYING +sha256 4f24a4966a4aa353d2bd1a8afca9b88c7b7bd29c46b3a1a7f5305686b9d6e038 s6-rc-0.5.3.2.tar.gz +sha256 1898df1e8703bd9c1350d2ec3397880b9b4c1451038a9ce5e1c4b2e58622da39 COPYING diff --git a/package/s6-rc/s6-rc.mk b/package/s6-rc/s6-rc.mk index 05d7989735..85b047883b 100644 --- a/package/s6-rc/s6-rc.mk +++ b/package/s6-rc/s6-rc.mk @@ -4,7 +4,7 @@ # ################################################################################ -S6_RC_VERSION = 0.5.2.2 +S6_RC_VERSION = 0.5.3.2 S6_RC_SITE = http://skarnet.org/software/s6-rc S6_RC_LICENSE = ISC S6_RC_LICENSE_FILES = COPYING From thomas.petazzoni at bootlin.com Sun Oct 30 22:40:41 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Sun, 30 Oct 2022 23:40:41 +0100 Subject: [Buildroot] [PATCH 0/9] bump skarnet software: s6, execline, mdevd, etc. In-Reply-To: <20221009155938.2041695-1-troglobit@gmail.com> References: <20221009155938.2041695-1-troglobit@gmail.com> Message-ID: <20221030234041.67e512cf@windsurf> Hello Joachim, On Sun, 9 Oct 2022 17:59:28 +0200 Joachim Wiberg wrote: > Joachim Wiberg (9): > package/skalibs: bump to v2.12.0.1 > package/mdevd: bump to v0.1.6.0 > package/execline: bump to v2.9.0.1 > package/s6: bump to v2.11.1.2 > package/s6-linux-utils: bump to v2.6.0.0 > package/s6-portable-utils: bump to v2.2.5.0 > package/s6-dns: bump to v2.3.5.4 > package/s6-networking: bump to v2.5.1.1 > package/s6-rc: bump to v0.5.3.2 Thanks, series applied. One thing that was missing from the commit logs is the explanation of why the hash of the license file is changed. So I checked why, and added the explanation in each commit log. Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Sun Oct 30 22:43:28 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Sun, 30 Oct 2022 23:43:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/msmtp: security bump to version 1.8.22 Message-ID: <20221030224328.684577-1-fontaine.fabrice@gmail.com> - Fixed a security problem in msmtpd: mail addresses starting with '-' could be interpreted as options of the pipe command. https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS Signed-off-by: Fabrice Fontaine --- package/msmtp/msmtp.hash | 4 ++-- package/msmtp/msmtp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash index 1e73d92470..c5571f2fb3 100644 --- a/package/msmtp/msmtp.hash +++ b/package/msmtp/msmtp.hash @@ -1,7 +1,7 @@ # Locally calculated after checking signature -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz # Hash for license file: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk index 3db36f4cd0..c3928ffcbb 100644 --- a/package/msmtp/msmtp.mk +++ b/package/msmtp/msmtp.mk @@ -4,7 +4,7 @@ # ################################################################################ -MSMTP_VERSION = 1.8.14 +MSMTP_VERSION = 1.8.22 MSMTP_SITE = https://marlam.de/msmtp/releases MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz MSMTP_DEPENDENCIES = host-pkgconf -- 2.35.1 From paul at crapouillou.net Sun Oct 30 23:04:10 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Sun, 30 Oct 2022 23:04:10 +0000 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build Message-ID: <20221030230410.982946-1-paul@crapouillou.net> Add a patch cherry-picked from upstream to fix the build with GCC 12. Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. I don't know if it fixes any autobuilder errors, I noticed the bug when building locally. Signed-off-by: Paul Cercueil --- ...ibmatrix-Add-missing-utility-include.patch | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 package/glmark2/0002-libmatrix-Add-missing-utility-include.patch diff --git a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch new file mode 100644 index 0000000000..2a658393ae --- /dev/null +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch @@ -0,0 +1,29 @@ +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 +From: Alexandros Frantzis +Date: Mon, 14 Feb 2022 13:54:09 +0200 +Subject: [PATCH] libmatrix: Add missing include + +Fixes compilation with GCC 12. + +Fixes #169 +--- + Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a + + src/libmatrix/program.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h +index f95b470..1c9de08 100644 +--- a/src/libmatrix/program.h ++++ b/src/libmatrix/program.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include "mat.h" + + // Simple shader container. Abstracts all of the OpenGL bits, but leaves +-- +2.35.1 + -- 2.35.1 From james.hilliard1 at gmail.com Mon Oct 31 01:09:04 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 19:09:04 -0600 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir Message-ID: <20221031010904.1109541-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, as such we also need to set --with-dbus-busdir which would otherwise be pulled via pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- package/iwd/iwd.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..e53ae595d7 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ --disable-manual-pages \ --enable-external-ell \ --enable-dbus-policy \ - --with-dbus-datadir=/usr/share + --with-dbus-datadir=/usr/share \ + --with-dbus-busdir=/usr/share/dbus-1/system-services IWD_DEPENDENCIES = ell ifeq ($(BR2_PACKAGE_READLINE),y) -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 02:54:23 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Sun, 30 Oct 2022 22:54:23 -0400 Subject: [Buildroot] [PATCH 1/1] package/bearssl: disable parallel build In-Reply-To: <20221030212920.3dd30baa@windsurf> References: <20221015005813.4055238-1-james.hilliard1@gmail.com> <20221030212920.3dd30baa@windsurf> Message-ID: On Sun, Oct 30, 2022 at 4:29 PM Thomas Petazzoni wrote: > > Hello James, > > On Fri, 14 Oct 2022 18:58:13 -0600 > James Hilliard wrote: > > > The bearssl package is not compatible with parallel builds. > > > > Fixes: > > - http://autobuild.buildroot.net/results/5e1/5e1b72db206b2d17fa5ce378a70fdc2f3f5bf773 > > > > Signed-off-by: James Hilliard > > --- > > package/bearssl/bearssl.mk | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > Based on the feedback which said that fixing bearssl was preferred over > using $(MAKE1), I have marked this patch as Changes Requested. Could > you see at fixing the bearssl build system, submit the fix upstream, > and provide the fix for Buildroot? I contacted the maintainer as described here https://bearssl.org/contrib.html with the suggested change, so far I haven't received a response back. > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 06:34:59 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 06:34:59 -0000 Subject: [Buildroot] [autobuild.buildroot.net] Daily results for 2022-10-30 Message-ID: <20221031063506.F276240246@smtp4.osuosl.org> Hello, Autobuild statistics for 2022-10-30 =================================== branch | OK | NOK | TIM | TOT | 2022.02.x | 2 | 0 | 1 | 3 | 2022.08.x | 9 | 17 | 0 | 26 | master | 130 | 272 | 14 | 416 | Classification of failures by reason for master ----------------------------------------------- libnss-3.84 | 22 glibc-2.36-66-ga1dc0be03c9d... | 17 libcurl-7.86.0 | 16 host-lzo-2.10 | 15 brltty | 12 host-ninja-1.10.2.g51db2.ki... | 12 imagemagick-7.1.0-51 | 11 host-binutils-2.38 | 10 host-f2fs-tools-1.15.0 | 8 crun-1.5 | 7 host-sentry-cli-1.59.0 | 7 linux-6.0.1 | 7 host-cdrkit-1.1.11 | 6 dash-0.5.11.5 | 5 host-go-1.19.2 | 5 host-pahole-1.24 | 5 unknown | 5 gerbera-1.10.0 | 4 gobject-introspection-1.72.0 | 4 host-rust-1.64.0 | 4 xz-5.2.7 | 4 f2fs-tools-1.15.0 | 3 igd2-for-linux-2.1 | 3 libshout-2.4.6 | 3 lz4-1.9.4 | 3 apitrace-10.0 | 2 brotli-1.0.9 | 2 dahdi-linux-3.2.0 | 2 efivar-38 | 2 fontconfig-2.13.1 | 2 gensio-2.5.5 | 2 host-binutils-2.37 | 2 host-binutils-2.39 | 2 igh-ethercat-1.5.2 | 2 linux-5.10.145-cip17-rt7 | 2 lzo-2.10 | 2 mbedtls-2.28.1 | 2 musl-1.2.3 | 2 rauc-1.8 | 2 sdl-1.2.15 | 2 uclibc-1.0.42 | 2 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 /home/buildroot/autobuild/i... | 1 acpid-2.0.34 | 1 alsa-lib-1.2.7.2 | 1 bash-5.1.16 | 1 batman-adv-2021.4 | 1 bdwgc-8.2.2 | 1 botan-2.19.2 | 1 cairo-1.16.0 | 1 cmocka-1.1.5 | 1 easyframes-0.4 | 1 elfutils-0.186 | 1 expat-2.5.0 | 1 fftw-quad-3.3.8 | 1 file-5.43 | 1 freeipmi-1.6.10 | 1 fs/cpio/cpio.mk:117: /home/... | 1 fs/ubifs/ubifs.mk:49: /home... | 1 fs/ubifs/ubifs.mk:49: /tmp/... | 1 gmp-6.2.1 | 1 gnu-efi-3.0.15 | 1 gobject-introspection | 1 guile-3.0.8 | 1 gummiboot-2bcd919c681c952eb... | 1 host-gcc-initial-10.4.0 | 1 host-spirv-llvm-translator-... | 1 jpeg-turbo-2.1.4 | 1 kmemd-1.0.0 | 1 libgcrypt | 1 libglib2-2.72.3 | 1 libgpg-error-1.45 | 1 libkcapi-1.4.0 | 1 libndp-1.8 | 1 libnl-3.6.0 | 1 linux-5.10.145-cip17 | 1 linuxptp-3.1.1 | 1 lirc-tools-0.10.2 | 1 ltp-testsuite-20220930 | 1 lxc-4.0.12 | 1 make: *** wait: No child pr... | 1 memcached-1.6.16 | 1 mmc-utils-d40ec535b9d4e4c97... | 1 moby-buildkit-0.10.0 | 1 ntp-4.2.8p15 | 1 ocf-linux-20171122 | 1 open62541-v1.3.3 | 1 procps-ng-3.3.17 | 1 proftpd-1.3.6e | 1 python-greenlet-1.1.3.post0 | 1 sudo-1.9.11p2 | 1 wavemon-0.9.4 | 1 x264-baee400fa9ced6f5481a72... | 1 xvisor-0.3.1 | 1 zlib-ng-2.0.6 | 1 Detail of failures for master ----------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/45650f73a497700bcecbaf2a556be7c3d533fb90 | mips | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/a908f676bdfa2d0ee549eda9cdae8f440b708289 | riscv32 | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/e303f6ef097b18ed3cf61c44e320f2bb35f423f0 | s390x | /home/buildroot/autobuild/i... | NOK | http://autobuild.buildroot.net/results/62a9cd20f129f50dfe754ecbb3e2cee42b6d4941 | mips64 | acpid-2.0.34 | NOK | http://autobuild.buildroot.net/results/a240a28f90b57e1c22d47f1262f02dcdbbecd47f | ORPH or1k | alsa-lib-1.2.7.2 | NOK | http://autobuild.buildroot.net/results/392d4114e218031ec9b89a367108a854f8352285 | i586 | apitrace-10.0 | NOK | http://autobuild.buildroot.net/results/0354f263c2d17db0a282777811e3c3d555148b9c | i586 | apitrace-10.0 | NOK | http://autobuild.buildroot.net/results/8a172500a00817824e3138f67545268143733d67 | powerpc64le | bash-5.1.16 | NOK | http://autobuild.buildroot.net/results/0c1b02c6a91dd81be698dce38043f4e6b9ddf826 | ORPH or1k | batman-adv-2021.4 | NOK | http://autobuild.buildroot.net/results/542b7b99da7b7a65e6e11e7c73a26856e3222e89 | riscv64 | bdwgc-8.2.2 | NOK | http://autobuild.buildroot.net/results/16d6c4095de182c5a07d22c936c1ad1c7d78ab07 | x86_64 | botan-2.19.2 | NOK | http://autobuild.buildroot.net/results/cf113c389f68a92ac1b20c99d5b116bdf9e26cb6 | ORPH sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/858fecba9bc607366762f4254f5759101b5562c0 | aarch64 | brltty | TIM | http://autobuild.buildroot.net/results/7293c7a5205b4814de1fe6fe95fe37c5a112766a | powerpc64le | brltty | TIM | http://autobuild.buildroot.net/results/61a7a69e0e8216764d34732bbfa78115d5adf9b2 | sh4aeb | brltty | TIM | http://autobuild.buildroot.net/results/e41ca907912a9822fd1d599133d187d47f753674 | mips64 | brltty | TIM | http://autobuild.buildroot.net/results/9e5b28a9aa6e1d2136577d896257b1891ed41e86 | sparc64 | brltty | TIM | http://autobuild.buildroot.net/results/01734f374bd72606b9c67018d6fae2e3186e5ba9 | arc | brltty | TIM | http://autobuild.buildroot.net/results/e49527e2a3a08a98b60456c06c5557570550a77b | powerpc | brltty | TIM | http://autobuild.buildroot.net/results/1cbbfcc089586efb9e29557e725e052c4f8ed912 | sparc | brltty | TIM | http://autobuild.buildroot.net/results/bb744b2370c37e9f5e6888c3ef0c7000c0dd4e4b | nios2 | brltty | TIM | http://autobuild.buildroot.net/results/3b0623fd0d9d82bccf21ab3808291698356c5f34 | or1k | brltty | TIM | http://autobuild.buildroot.net/results/2b053c13733040306bb1f4c5ad7131ab62feb4f3 | xtensa | brltty | TIM | http://autobuild.buildroot.net/results/b73879c3e7513f9e2b77d9c2b226cd249cf4e17e | mips64el | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/b2aa7dfa99d0ad4dabc60406bc7e18a3ea553c19 | powerpc | brotli-1.0.9 | NOK | http://autobuild.buildroot.net/results/490618437029e0fa8349d05a10562ae81c2d900e | or1k | cairo-1.16.0 | NOK | http://autobuild.buildroot.net/results/7467a8ec9f93ee6428f18f4c9812f8359ab9fd69 | x86_64 | cmocka-1.1.5 | NOK | http://autobuild.buildroot.net/results/0b5afcb99f4b186524c8c628213503c9c7eb7f74 | or1k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/210939b07aafacfdfea56bdf56a12f38f25f481a | i686 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/3b6cef90189cbe021525668362c149505616fa57 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/578fc2735388fc0bd4fd2e1ae1437128828f6472 | mips64el | crun-1.5 | NOK | http://autobuild.buildroot.net/results/f5d01b5fcf05eb561f16fc048afff1540c185828 | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/5c46e74937122933e93c94e7504063b3c4cc95bf | m68k | crun-1.5 | NOK | http://autobuild.buildroot.net/results/812c278df17718ad97685d801ab22ac0fb568374 | riscv64 | crun-1.5 | NOK | http://autobuild.buildroot.net/results/6741f6e73138116fd66d262a266ae31f0e73a692 | sparc64 | dahdi-linux-3.2.0 | NOK | http://autobuild.buildroot.net/results/3fdc39737e3edfe69ee5842184f959d6ce4eeb24 | powerpc64 | dahdi-linux-3.2.0 | NOK | http://autobuild.buildroot.net/results/ddacd807dddeb1649e957264ac57bba27d9bb463 | mipsel | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/cb3bc6e599001dfad1faec054433d6460337180e | ORPH aarch64_be | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/d3d08c8f9dd7cbaaccf3bdb762af436ca077cd03 | ORPH aarch64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/bb9ce52d0eb49d2f3e9b7da44a0768248e19de8f | ORPH x86_64 | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/55161c49409f0237fe4db4cb188bc9ccf87ab250 | ORPH sh4aeb | dash-0.5.11.5 | NOK | http://autobuild.buildroot.net/results/0a0e6061ca9fe2d45fe043381a79a09043db4d7d | ORPH mipsel | easyframes-0.4 | NOK | http://autobuild.buildroot.net/results/d8b9055648fb7845b3eea07e50e119d4c2cbd342 | arm | efivar-38 | NOK | http://autobuild.buildroot.net/results/ab09480316089da1597a943717a2c1dccec90bd6 | x86_64 | efivar-38 | NOK | http://autobuild.buildroot.net/results/ae5047d670db58f6d6aa5bd470c8e0023261e6b2 | microblaze | elfutils-0.186 | NOK | http://autobuild.buildroot.net/results/711014e227e4bd38db2924156f6d21eb787a5dfb | ORPH powerpc64le | expat-2.5.0 | NOK | http://autobuild.buildroot.net/results/24c1f21a10ae57f21f5b11860a1f1726ee577d48 | riscv32 | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8c6125734f64160f8ec99332bcbb92c34b65ab5a | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/186a4aa6bf19888e8c5b0071f447883f56954382 | or1k | f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/8d09e2497ef531b5ef54ac8f334a439735161056 | powerpc64le | fftw-quad-3.3.8 | NOK | http://autobuild.buildroot.net/results/736fe05b4d4a404c4b5d6129179c5ac583681a26 | ORPH armeb | file-5.43 | NOK | http://autobuild.buildroot.net/results/4fa22f6975ff134fa70b075d876a7c4d1aa0192e | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/fbd45dc632df77a49d2a606dcca71b0d1f403825 | ORPH riscv64 | fontconfig-2.13.1 | NOK | http://autobuild.buildroot.net/results/e358f35ada4e73294df15c43c1262ff59cfc121d | ORPH powerpc64 | freeipmi-1.6.10 | NOK | http://autobuild.buildroot.net/results/cc2b7f4f3bfac64b7d55e231438603a7ce20afe9 | powerpc64 | fs/cpio/cpio.mk:117: /home/... | NOK | http://autobuild.buildroot.net/results/92e5a7efc769614462da19d8d790f1b47788cc9a | or1k | fs/ubifs/ubifs.mk:49: /home... | NOK | http://autobuild.buildroot.net/results/05c06f63393e96b568ed05388c9792586f496170 | sparc | fs/ubifs/ubifs.mk:49: /tmp/... | NOK | http://autobuild.buildroot.net/results/89ab85192c253cf6d6ba8b7befc3a4ee6d6acd8c | microblazeel | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/42487089e1d823606370467f7f376be45beda770 | arceb | gensio-2.5.5 | NOK | http://autobuild.buildroot.net/results/363fd8361bd8c9c4e6839c2b63c5e208422807e8 | x86_64 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6541a9f28c1eee90f61eb0e4ea53d7bbc6abbedf | arm | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/6743f28353ea6c363d07da4c46e5397f40d89ea1 | sparc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/d876bc011a19e4e7a80b6747d09b732bd04300b6 | arc | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/ad4ebf7694120d3f72506e3b26af67072d073317 | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/0de276a3587cd87a0c4285988446afd4c48d7c70 | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/af0536d4d9bf68102f7eaac6ddc28a0277e2e52b | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/05f08e3cc71795f312d59e9b74010edff629d6ff | microblaze | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/303539915f221967d666a0a66605761f506566bf | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/4dd11657ee7f4b3dcf5195b597afb06df2f56667 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/40130e8d51b8a12a9005ee71d3f402da10a1ae18 | powerpc | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a44bd2d81eea6059d5ab696455c161a0d47b271c | mips | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/864d08d7c55fcf6702d6aaf39cdd90d43b5da1a5 | or1k | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/74f6802d60b6af305257c90089b5b1cf96f0f48f | powerpc64le | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/3179bf850e5bda3fac252aec05b3e863a0cbca65 | sh4 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/6cc11ca48059f19487fb44eef68197314321540b | sh4a | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/8fee4b8431fde83120d68c7d86a17e481944208d | sh4 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/4af10a816520d331ba92e769f8191a94b81dc4b7 | sh4aeb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a743d88fc0bea78f5451c8c52cfb4c5fd144a4b0 | nios2 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/5125453ebc89bdea7d0f0cd64b0029b3dd2f650f | riscv32 | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/ca252ff3e0317c28443f5ab98b17cd2b4faff58e | sh4eb | glibc-2.36-66-ga1dc0be03c9d... | NOK | http://autobuild.buildroot.net/results/a82784fee356d3284edfc5590516e817f01efcc1 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/7bd52aeae2d58aca787e89ee54b250e0ebd5a228 | ORPH mips64el | gnu-efi-3.0.15 | NOK | http://autobuild.buildroot.net/results/a1c1812382e5ca23360038dd0120383685ae0c28 | armeb | gobject-introspection | TIM | http://autobuild.buildroot.net/results/53f91f88fffc616152861d04b771393c09adeafd | s390x | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/559bb5a6799261d1f0f5cc7ce39287493652508b | ORPH sparc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/4c333c4b552aa7ece0f7454efe43e32d96b4b720 | ORPH powerpc64 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/edd3d0d225dfb23bdb669639f2d784683eb19a5a | ORPH nios2 | gobject-introspection-1.72.0 | NOK | http://autobuild.buildroot.net/results/09579c0c9e8795d59122bd6c936e75539a64dcf2 | ORPH mips | guile-3.0.8 | NOK | http://autobuild.buildroot.net/results/ea1930d2d57b9017a1ab914f934d1558b3bd98c5 | x86_64 | gummiboot-2bcd919c681c952eb... | NOK | http://autobuild.buildroot.net/results/9f706b9c90bfebf8a76fc2d54da7617dbfd000a3 | nios2 | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/6d860b3768e7c76f40e83924fcf4fc952363f2b8 | microblaze | host-binutils-2.37 | NOK | http://autobuild.buildroot.net/results/1e08dc58fb1ebcd5545bfac58f990c41d782fb5a | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/78ba062bc6a496a858ee7ec22f01829aa033157b | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/3c9c707f943745a7c3845c00818901ccf0e34c6e | riscv64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/5230bf439a3c82b43a06d27c15b956a10b74bf11 | mips64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/8460680ad4d12e4c1835a65bc29e2a92b75e77dc | x86_64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/aa4059b33a220ab31c3deb73f62b0e5a6d5c7d80 | aarch64_be | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/46f1e306e6a4d62095280204a10f84887b8b089f | riscv32 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/6a79a21921ea760af6c8ea4dc01ac968f6ea0fe9 | mips64el | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/834db8fd3334154bb7ed23f911f3520488cfbc89 | s390x | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/d3fa65f7de625dc79a1068e9162414c8bf7914c4 | aarch64 | host-binutils-2.38 | NOK | http://autobuild.buildroot.net/results/e8edcc422e63ac547d8a3153a9386ce821912768 | mips64 | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/68cf24bb1ba1492afd68b37c8c94ffe092541611 | mips64el | host-binutils-2.39 | NOK | http://autobuild.buildroot.net/results/a233a85050d0bbed69d7c563a98ccab95711e211 | i586 | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/4e34c37ef48e527b820d100dc23d575daf362bba | or1k | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/2f3b7e41e0f10e4894285d9c833f366be888d9dc | sh4aeb | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/1f7e48209fc6bd481ce34c6ddfa2fa8cf5c0dcc5 | mips64 | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/81992c95851693a9438112e92846ba4cafb6dec5 | arc | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/da806ed2f18a56334123a45cce1b2fe1700f7f0b | sparc | host-cdrkit-1.1.11 | NOK | http://autobuild.buildroot.net/results/101ca112613ef232a489712692489c6a760cdc50 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/4647c12735173ce8f89b255d1cfba91db7af5bab | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/90d8d55916a002d9740948e873e5546e0894bea1 | mips | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/a5f9d9ba35a4596834e91de9a8ba850f32c329fb | powerpc64le | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/94368a328f382bb87f58b051649e41d7c5c95c7d | mips64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/11e2d3d74b0c6f8ea324078418a6847ec24b6297 | arceb | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/2c64d596fb5a433a4448f9fdb990fc4210722e62 | s390x | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/307f41bf09da1abd59a948a081589fdffa6747b0 | aarch64 | host-f2fs-tools-1.15.0 | NOK | http://autobuild.buildroot.net/results/97e03d10dcb049d3bf1355455b6ac0cd1070137b | sparc | host-gcc-initial-10.4.0 | NOK | http://autobuild.buildroot.net/results/43dfe23c883e6f4e68b98030a3e6dd1e045ec1d8 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/79abb73e76dd5d2186c3f042ea85c992e2fa01e8 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/c9941a19f99e1d4ec7e1c8b9d6e969362ffc40e2 | mips64 | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/ff39dd9ec14f1a940a9c9c54c19dad00e3d5f219 | powerpc64le | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/cfedb14b151996ee9ec30a749f8a20b1d9b314b3 | mips64el | host-go-1.19.2 | NOK | http://autobuild.buildroot.net/results/8ab33d61dc0bcccf43e531e19089a9d2084bd5b8 | powerpc | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/a5f34cca49ed4c7672505ad180009723088fb66b | ORPH powerpc64le | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/f630f3d4610b8a0c9a8150d28fe689dec304bffa | ORPH mips | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7e52a08445dd715afabbb4c1c84ab44d856d6c4f | ORPH powerpc64le | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/91bd4f57d50e7d8deaf9eaf02a2f542a367622e2 | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/babcb91ca1806af3b38869a1794ec75ae7167527 | ORPH mips64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/39f0e86c4f8a8460bec998b80f0649d9afa74359 | ORPH powerpc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/080465565a5eab0ed08cc8a0998a4bde551e83f8 | ORPH armeb | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/62c59baa3283b9286b6cbebfcd62009561ebd151 | ORPH mips64el | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/351d791ace5a5be6b3142ed7fd1849cd3d562056 | ORPH microblaze | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/f329e4f76a42af06ee6405eb235a18bce89932d6 | ORPH powerpc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/9f9b1707e4b7339f4aabc40332e879b6b4ba36c3 | ORPH s390x | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/349dbfae4ebaf0f67f69965cc1c4ba479120091b | ORPH xtensa | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/d7f8e758a859aabd90d3b31d5b9cc2bfc9e09f59 | ORPH sparc64 | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/e7f423ce71ffc4e72c926cdbf836e0b4a6917686 | ORPH powerpc | host-lzo-2.10 | NOK | http://autobuild.buildroot.net/results/3768894b015e379c7b3087da77850c939864a6c1 | ORPH aarch64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/bf5bbefff974ae5a7ceffab7c0994c753e202d33 | powerpc64le | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/0d739c853045bb5c1331f31650c50bf7bda95963 | armeb | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/661019c71986bc0239082a6d72a45886b60399a1 | arc | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/b0c61adbe7d512d0b5f6850b2fb3aaee14caa9d9 | or1k | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/f073a90c6a7844beaa4367f6066951e21db664e5 | sparc64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/c090077de1d5118e992e8b4cf7fc37c19de2fb25 | microblazeel | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/a73309d5f3847266ab421fbad528d7668ce69b89 | aarch64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/4a1ed71f5a2c80adc9b526b8e8fff7535456cbe9 | sparc64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/859b0e39d346ccda4343d710ad90f4e9538314d2 | powerpc64le | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/78f88daee095efc122c79f189c5d81a0effeee50 | mips64 | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/ca9e950a291f80fd297d622ecf77f96bcce4d032 | xtensa | host-ninja-1.10.2.g51db2.ki... | NOK | http://autobuild.buildroot.net/results/723af5afcae0e57dfe7479742196c64f1dd2ea83 | mips64 | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/117cdd88ce1928bdbc2e6b76661e855c29ff2860 | microblaze | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/4c3daffd2c9a1524bbd33bf9ea60d89050c47348 | microblaze | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/a554eeca75a44c40d1601f0036f81fb06b90ff47 | arm | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/25155c7926a9b232362ded894a23d7ddce3cefa0 | mips | host-pahole-1.24 | NOK | http://autobuild.buildroot.net/results/47bb5724d3917f47d6e8af751d360c46883d3d38 | mipsel | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ede194346bcbb39f0269a7a8f34daffd27ecea0b | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/cfd7262b0b5228b08569d676bdc74d17f79da9ca | aarch64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/ea781f3d6139742171c99f356141ba633b3b976d | x86_64 | host-rust-1.64.0 | NOK | http://autobuild.buildroot.net/results/fd4edfd6dd82b6c4390513a4dc46ebd918185188 | riscv32 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/5da46dbd0fb656431e458286aef72672bfa5384c | sparc64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/92d44b1c9f1131ebd98b5a2b14f522dcbaae14a7 | mips64el | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/57f43a3168afc1484fadb89962fe1dac0352acc6 | x86_64 | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/b5445dcdb6dd22698de7e8c66ba224e93526a4f5 | arm | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/a3e42f5e9c03ff17fa4a2ef916af4ea867664795 | s390x | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/21a4f7dac92557c28a2cdb17a6952ec7d91c78eb | m68k | host-sentry-cli-1.59.0 | NOK | http://autobuild.buildroot.net/results/493cd47849d1bfb7a8c80748c43f5e3dc1038576 | riscv32 | host-spirv-llvm-translator-... | NOK | http://autobuild.buildroot.net/results/d7b3648ba1519c0f4251186a57496cdee1269f16 | ORPH x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/258248222c8dda465f74d186b708a1d676404335 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/ce28b00b94da94cb03c7819705caef21fc29f6c9 | x86_64 | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/962517db0fa3b3a52481b8f282cd34f68ca4ce08 | or1k | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/dbb5fc18d95c9e137ee760657f1c05fb616ad51e | microblaze | igh-ethercat-1.5.2 | NOK | http://autobuild.buildroot.net/results/1d11bd07fe5830a4f50ebda913bdc7be87a87c9f | arm | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/0b8cd2e154915dedda2ff4cd54aaaa30b912a47e | ORPH m68k | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/4ed9c3c57e258affba21b7e79e5922b90b219162 | ORPH s390x | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/35c18d789ada03bb3835bb79a56de93bb4fcf652 | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/9b698136ff46eae37f9ab3ad8f0bbdb032707ef7 | ORPH x86_64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/868c7f8b650d48533566bf78e21224b1e1e83330 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/6d5fdb67716fbd4d1876a241f0274dbc0e95725c | ORPH sh4aeb | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/7d166174cc0b4c13f360e47c2da04ec94db1b522 | ORPH sparc | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/81b624d55f341e75a88cc88e945ef7704ec75f5a | ORPH aarch64 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/e2b18c9c2b7a7c46cd8d0e966c79d0e35721b75f | ORPH i586 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/c8ebb194188fe362453fe923a5faa4a13ff9705f | ORPH i686 | imagemagick-7.1.0-51 | NOK | http://autobuild.buildroot.net/results/47f5b32967f0bf326a5278dc1b2c255e6dc04a00 | ORPH or1k | jpeg-turbo-2.1.4 | NOK | http://autobuild.buildroot.net/results/306b26041ecb137310095e8e596b333dca8ed7b6 | arm | kmemd-1.0.0 | NOK | http://autobuild.buildroot.net/results/dcd7e6321d64746b8b867fa3f32095d1180a40fc | mips64el | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/2a00d77a037827b37d6187c79d35d00c62cb5ffb | sparc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/e54457e0490e2959a207d97f2ff22397f8aba539 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b4340e2217fe9aa2c89ef4f08c88a12374b20ba3 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a4b88956176052a89010cf5488b75558397733f2 | aarch64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/4432314aa13d4acc8fce27f79177f82298ae0626 | microblaze | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/5a4a905de2a232a38916f03278d0a3cbd8a29711 | powerpc | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/05e9cb71619e640849c27b2984d0df671a9f86c5 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/3ce36670a862caebf312a69f8156139f418aa96a | powerpc64le | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/0b00afbf97879c5d98a01cffe8baadc630d14af0 | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b0fe815d894449b58f723a1a35fc5f2ccef7693b | i686 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/35bc1163c5bb2cc83c7ccaccc235a2b5ac9f4e36 | mips64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/6bee9c2adc574ff5846d224f6c788bf9e18fe2fb | mips | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/a1cd06f096ff26965a952e95de33be483459d597 | x86_64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/b439a7d4b979d219bfe495e15728cee87f51cbd8 | mips64el | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/ead03bdafb60719d9e7f68414b6c7f73f7738ad1 | powerpc64 | libcurl-7.86.0 | NOK | http://autobuild.buildroot.net/results/5e1fc51442837bbfc1671cfd66ac310dc34c9340 | armeb | libgcrypt | TIM | http://autobuild.buildroot.net/results/b266a325c4cb78b8e7488e4238cd17d19535a739 | arc | libglib2-2.72.3 | NOK | http://autobuild.buildroot.net/results/4196500c433574375a4162dd219ef2386a189234 | aarch64 | libgpg-error-1.45 | NOK | http://autobuild.buildroot.net/results/aece750089140eb0ca5af09f4fe1aa53604fc49d | ORPH or1k | libkcapi-1.4.0 | NOK | http://autobuild.buildroot.net/results/33898f1891079164279a9b3d2e424fe42eb978cf | ORPH riscv64 | libndp-1.8 | NOK | http://autobuild.buildroot.net/results/cba2b1f822ce566eedebce5801e67c6b8cb90796 | mips64el | libnl-3.6.0 | NOK | http://autobuild.buildroot.net/results/9ac863d1d62f92301d8d7d6c103e3c1dcdf15bdd | ORPH powerpc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7518320805500e7f846169ffee5763802150d91a | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9269efe011982e63642840184e38947cdd615baf | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e29b18d01779024809130c7c16e0a06a9d1494d3 | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/a9b8338c32f8ba8bc8776dcd35988a4c125c52ec | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/d1573ad6315e268bf852d1df6fd3ed58f43122a9 | microblaze | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d9efedabaa2c2b7174a86e09b1e66de56cf8418 | arc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/ed535ad77793174f6b631b1a847e338c4c61ac73 | or1k | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e61177a87abeb74b21bebccf4150b8718ec97f52 | mips64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/6c1d081e4384074dd65c1e22534ca5b8fa1e4d85 | sparc | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7d4813926b5b04f570e89696f5a7e7f35aa0f905 | mips | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e63a90eb10daabd15868aa9f5434ecc8fa59184c | aarch64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/7396e0e2da462e7466324f287b97cfe3eca89481 | arceb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/4eec1670a5b1911c5da3a37ac4291cc6568e6b90 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/004e402e21d07575eaf72932ab20e83123ee150a | armeb | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/9276ca0c9c799ffe70075dca8a34c9baf22760f2 | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/e837b1dade11732f44be56683ec91fcf1a641ef5 | mips64el | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1268a23e7f3189e5e872008ae25c548922053b1c | nios2 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/71e20bf57a66f6af3242b46a7b8c70706fe5843c | s390x | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/dc63527ec64fabd47f2cf7796992d9cb90492371 | x86_64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/bee26320b9430b9923fcab9e6cb18d4af191ef82 | sparc64 | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/f9fe0fd33be737651919ed790ebebb92ea76765f | aarch64_be | libnss-3.84 | NOK | http://autobuild.buildroot.net/results/1d4b4f57f707fd9e5d507c6209de32eaa6d48856 | aarch64_be | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/9ac1fb9cd408e049504377742b554904ca3e81c3 | ORPH mips | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/4c7de2e167643d10f4b2b91640782ab09cb6457c | ORPH s390x | libshout-2.4.6 | NOK | http://autobuild.buildroot.net/results/32765c5952210a01c900e61694f12431b5643864 | ORPH m68k | linux-5.10.145-cip17 | NOK | http://autobuild.buildroot.net/results/71dbdc42922119e7e95a79f87a1c92e2704d5a2d | ORPH powerpc | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/8978fc9d033f6c8372bc405a2d2b98f28e1c9564 | ORPH mips | linux-5.10.145-cip17-rt7 | NOK | http://autobuild.buildroot.net/results/3099263bd594bac523a4206231288c1663aef552 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/0308724d58394d89a55d9e2813b545c2ba90e896 | ORPH mipsel | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/7ec8bed55e3d0ca31e5dfa44bc4acd13afd3189c | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/a927a5466a1181c09a0daf54c3ea7b8ab29b6de0 | ORPH sh4a | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/b3074c78afcc34fd40c81e113dc3217be6840563 | ORPH aarch64_be | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/dfcd3d6c907be6be6456c5e8722bf606ba62da5f | ORPH powerpc | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/3d3565e3a8621e792e270d05be4adf53f0818cef | ORPH mips | linux-6.0.1 | NOK | http://autobuild.buildroot.net/results/1022366f18cefe7b9036e24258b67001d4df613e | ORPH s390x | linuxptp-3.1.1 | NOK | http://autobuild.buildroot.net/results/a77238888c284c397edf7eaaac7330d2a99d7770 | arc | lirc-tools-0.10.2 | NOK | http://autobuild.buildroot.net/results/7a983337d502d51d0f9156751ea99e14e3b4467e | ORPH i686 | ltp-testsuite-20220930 | NOK | http://autobuild.buildroot.net/results/939df2d8736d047f007070f9cdec8ee976803a6b | x86_64 | lxc-4.0.12 | NOK | http://autobuild.buildroot.net/results/4b068c8496c28ca887d0f65464b6402935d5e540 | sparc | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/5dac8186a199ba8d44fc272a4b874614863ef60b | ORPH arceb | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/9169a0d5753d537ec34a96f608b5f76a7e2143bf | ORPH mipsel | lz4-1.9.4 | NOK | http://autobuild.buildroot.net/results/87372afab6684558136fce430cce98e0bf3cecac | ORPH or1k | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/0e51f1180c9387ebbc76ea5d8c3750ff3c8c2070 | ORPH riscv32 | lzo-2.10 | NOK | http://autobuild.buildroot.net/results/7158750ac07d000c10a97c5f43a6f4aac142950f | ORPH powerpc64 | make: *** wait: No child pr... | NOK | http://autobuild.buildroot.net/results/680c5c10d276eab1a3c4e1cfd367dcd9dcce37ad | mips | mbedtls-2.28.1 | NOK | http://autobuild.buildroot.net/results/5b16e01c262ce6054a8743cbc2ca362c602a9a21 | mips | mbedtls-2.28.1 | NOK | http://autobuild.buildroot.net/results/15fc1c40d4f17c713854dcfc4d32f074f5232166 | sparc | memcached-1.6.16 | NOK | http://autobuild.buildroot.net/results/ba89f3460c5678ef7da87a43f4759e96da11dd59 | ORPH mipsel | mmc-utils-d40ec535b9d4e4c97... | NOK | http://autobuild.buildroot.net/results/b2c68f7308e505451c83265ff537eb0254bad036 | s390x | moby-buildkit-0.10.0 | NOK | http://autobuild.buildroot.net/results/f44a23ced294e164d1242f029f06ee9e7e31c892 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/d1facd0cf37142b83318214274f751571d3747f7 | powerpc | musl-1.2.3 | NOK | http://autobuild.buildroot.net/results/81112a989668d3aad19da2fe2a2f29bf4412a041 | riscv64 | ntp-4.2.8p15 | NOK | http://autobuild.buildroot.net/results/496fa91a208650b9825ee4dc941ab9f421d054ff | ORPH sparc | ocf-linux-20171122 | NOK | http://autobuild.buildroot.net/results/6e56c8017c8523804ed7c316298e37516826768d | ORPH arc | open62541-v1.3.3 | NOK | http://autobuild.buildroot.net/results/fd7ccc77018db945d29e4a0d095f75d17802694f | ORPH nios2 | procps-ng-3.3.17 | NOK | http://autobuild.buildroot.net/results/1ed0401f0d7fd69b610e51de5d3cef342c404f6a | ORPH s390x | proftpd-1.3.6e | NOK | http://autobuild.buildroot.net/results/26e13149f79dc7795d09daff36d7fd0c359362a1 | powerpc64le | python-greenlet-1.1.3.post0 | NOK | http://autobuild.buildroot.net/results/e0717d20a389eb23ecaba4384fb44ad01fb0dca7 | arm | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/94ec927e33493d0e7615cce760dffae1a5cb7709 | i586 | rauc-1.8 | NOK | http://autobuild.buildroot.net/results/4a269f3b051c63a59eeeca5a5d4ae80877d0344f | sh4 | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/8d6467ffdd6f7c38b8d898ee97603a493a8b86b7 | ORPH sh4a | sdl-1.2.15 | NOK | http://autobuild.buildroot.net/results/89e72847034f4771788bc322814134ec890ee4c5 | ORPH arm | sudo-1.9.11p2 | NOK | http://autobuild.buildroot.net/results/071e44cb1e5f22d4a5666d8be1d309b6a76d0432 | ORPH riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/0eb0f905bf0ac90cc8e8670f233219ed4b2bce6f | riscv64 | uclibc-1.0.42 | NOK | http://autobuild.buildroot.net/results/8ee1c6b006ec48e5e1378dd5decd7e559cff378d | powerpc64le | unknown | NOK | http://autobuild.buildroot.net/results/d8138fde31b3bd6d70ffe1e25ad1548708ef8d8b | or1k | unknown | NOK | http://autobuild.buildroot.net/results/b20490b9678517f23f88d56af1f4cb5da89bde38 | mipsel | unknown | NOK | http://autobuild.buildroot.net/results/124ebaa4810ca89c6eea22c46d8062b7ed887a24 | i686 | unknown | NOK | http://autobuild.buildroot.net/results/eb13b55e2292b1ad81fee9a4ac64b05c733bb130 | microblaze | unknown | NOK | http://autobuild.buildroot.net/results/10163c56794c8a155060dbb1847d507cf72da9a7 | mipsel | wavemon-0.9.4 | NOK | http://autobuild.buildroot.net/results/f7f43d2a0cbfdd2793ac99c5548aac9b3d291c63 | ORPH i686 | x264-baee400fa9ced6f5481a72... | NOK | http://autobuild.buildroot.net/results/ebf252110e2133317685c92084771568d10629b7 | x86_64 | xvisor-0.3.1 | NOK | http://autobuild.buildroot.net/results/379f401f1669fab6b9df04b7ab87cb2eb9bdb19a | microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/575c257e7163d86bcdbd0cf9bcaca9d71d2f3216 | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/f0749a6a04635db94b7a8b862136cf6fb0effb9a | ORPH microblazeel | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/8dc9e79418763d1b46a5a47d0ffa66fc36f4063d | ORPH microblaze | xz-5.2.7 | NOK | http://autobuild.buildroot.net/results/c44125feadc8a4ae3b500ab724fe640d5ea4f6f1 | ORPH arm | zlib-ng-2.0.6 | NOK | http://autobuild.buildroot.net/results/41859604d868d25dd85a8e9b82bf9e43b703ff7a | ORPH Classification of failures by reason for 2022.02.x -------------------------------------------------- mongodb | 1 Detail of failures for 2022.02.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- arm | mongodb | TIM | http://autobuild.buildroot.net/results/6660efaba082c1a94e26016ff0fdc806631f6cb8 | Classification of failures by reason for 2022.08.x -------------------------------------------------- host-pahole-73383b3a39afe86... | 2 igd2-for-linux-2.1 | 2 erlang-22.3.4.22 | 1 gerbera-1.10.0 | 1 gmp-6.2.1 | 1 host-elf2flt-2021.08 | 1 host-gcc-final-arc-2020.09-... | 1 host-gcc-initial-11.3.0 | 1 libdcadec-0.2.0 | 1 linux-5.17.15 | 1 open62541-v1.3.2 | 1 openssh-9.1p1 | 1 openssh-legal-info | 1 tealdeer-1.5.0 | 1 unknown | 1 Detail of failures for 2022.08.x -------------------------------- arch | reason | OK? | url | orph? -------------+--------------------------------+-----+---------------------------------------------------------------------------------+------- sparc64 | erlang-22.3.4.22 | NOK | http://autobuild.buildroot.net/results/37d74daad05741977ac21acd20cc6c5c9cf6f79a | nios2 | gerbera-1.10.0 | NOK | http://autobuild.buildroot.net/results/16a40422899fdc78543a0ae7de6c8d441f62a177 | riscv64 | gmp-6.2.1 | NOK | http://autobuild.buildroot.net/results/04f351214b1fa4a2d6737dec678109cb7afdd59a | ORPH riscv64 | host-elf2flt-2021.08 | NOK | http://autobuild.buildroot.net/results/e6959a8ad8b5797dc88622fde5c3d0074a086e8a | ORPH arceb | host-gcc-final-arc-2020.09-... | NOK | http://autobuild.buildroot.net/results/9acee86224c7121f01761066dcf0f4626ad4cd8f | arm | host-gcc-initial-11.3.0 | NOK | http://autobuild.buildroot.net/results/a1119d0521ee8a418bff314106bb3ea34465783f | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/74bba64dba9ca09f82ebd7822bdb3be52ba7971d | mipsel | host-pahole-73383b3a39afe86... | NOK | http://autobuild.buildroot.net/results/e458d9902ed11b38a4d4ea2c2218fb5bb3bde434 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/fe9121b42a4e939a0d8c9709b8c091423d24f103 | mips64el | igd2-for-linux-2.1 | NOK | http://autobuild.buildroot.net/results/536d87d6d40a64cc008f349480c5b1a477a818b6 | armeb | libdcadec-0.2.0 | NOK | http://autobuild.buildroot.net/results/1015fbb9e0d082bba87cee786a8ce1625722467b | mipsel | linux-5.17.15 | NOK | http://autobuild.buildroot.net/results/ef3af3e1097bfd1ed5bf5328fa961df7eec22a00 | ORPH arceb | open62541-v1.3.2 | NOK | http://autobuild.buildroot.net/results/ee8940050a2a09017b94efc5733458ff1d9a919b | ORPH m68k | openssh-9.1p1 | NOK | http://autobuild.buildroot.net/results/be337411fd15aeab79fe338d8ba86d10c4d8087d | ORPH nios2 | openssh-legal-info | NOK | http://autobuild.buildroot.net/results/6e919ceaf1befb5106cf3829ceb354178beb1fed | ORPH s390x | tealdeer-1.5.0 | NOK | http://autobuild.buildroot.net/results/ac57b08c8867729f518e8da5c62c06ec62a7938d | mips | unknown | NOK | http://autobuild.buildroot.net/results/8a693f11955822f3d300a4ea1049c59d02cf4f9a | Packages having a newer version =============================== name | found by | link to release-monitoring.org | version | upstream | orph? -------------------------------+----------+----------------------------------------------+--------------+--------------+------- ace | DISTRO | https://release-monitoring.org/project/242395 | 7.0.6 | 7.0.9 | acpica | DISTRO | https://release-monitoring.org/project/00018 | 20220331 | 20222010 | adwaita-icon-theme | DISTRO | https://release-monitoring.org/project/13117 | 3.37.2 | 43 | agentpp | DISTRO | https://release-monitoring.org/project/21316 | 4.5.4 | 4.6.0 | alfred | DISTRO | https://release-monitoring.org/project/241870 | 2022.1 | 2022.2 | android-tools | GUESS | https://release-monitoring.org/project/13989 | 4.2.2+git... | 13.0.0_r11 | angularjs | DISTRO | https://release-monitoring.org/project/21321 | 1.8.2 | 1.8.3 | apitrace | DISTRO | https://release-monitoring.org/project/06170 | 10.0 | 11.1 | apparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | armadillo | DISTRO | https://release-monitoring.org/project/07006 | 9.900.2 | 11.4.2 | arp-scan | DISTRO | https://release-monitoring.org/project/00110 | 1.9.7 | 1.9.8 | asterisk | DISTRO | https://release-monitoring.org/project/09838 | 16.25.2 | 20.0.0 | at-spi2-atk | DISTRO | https://release-monitoring.org/project/07840 | 2.34.2 | 2.38.0 | at-spi2-core | DISTRO | https://release-monitoring.org/project/07841 | 2.36.0 | 2.46.0 | atkmm | DISTRO | https://release-monitoring.org/project/07962 | 2.36.1 | 2.36.2 | audit | DISTRO | https://release-monitoring.org/project/15225 | 3.0.7 | 3.0.9 | autoconf-archive | DISTRO | https://release-monitoring.org/project/00142 | 2021.02.19 | 2022.09.03 | avrdude | DISTRO | https://release-monitoring.org/project/10751 | 6.4 | 7.0 | avro-c | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | azure-iot-sdk-c | DISTRO | https://release-monitoring.org/project/21322 | LTS_07_20... | 3033-01-05 | babeld | DISTRO | https://release-monitoring.org/project/00154 | 1.9.2 | 1.12.1 | ORPH balena-engine | DISTRO | https://release-monitoring.org/project/141616 | 20.10.12 | 20.10.18 | ORPH bash | DISTRO | https://release-monitoring.org/project/00166 | 5.1.16 | 5.2 | ORPH bat | DISTRO | https://release-monitoring.org/project/241901 | 0.19.0 | 0.22.1 | batctl | DISTRO | https://release-monitoring.org/project/14740 | 2021.0 | 2022.2 | bctoolbox | DISTRO | https://release-monitoring.org/project/14746 | 4.4.8 | 5.1.67 | ORPH belle-sip | DISTRO | https://release-monitoring.org/project/14378 | 4.4.8 | 5.1.67 | belr | DISTRO | https://release-monitoring.org/project/80042 | 4.4.8 | 5.1.67 | berkeleydb | GUESS | https://release-monitoring.org/project/138386 | 5.3.28 | 18.1.5 | ORPH bind | DISTRO | https://release-monitoring.org/project/14923 | 9.16.33 | 9.18.8 | ORPH binutils | DISTRO | https://release-monitoring.org/project/07981 | 2.38 | 2.39 | bitcoin | DISTRO | https://release-monitoring.org/project/13618 | 0.21.2 | 23.0 | bonnie | DISTRO | https://release-monitoring.org/project/00212 | 1.03e | 2.00a | ORPH bootstrap | DISTRO | https://release-monitoring.org/project/21578 | 4.3.1 | 5.2.2 | btrfs-progs | DISTRO | https://release-monitoring.org/project/00227 | 5.16.2 | 6.0 | ORPH bullet | DISTRO | https://release-monitoring.org/project/07669 | 3.21 | 3.24 | c-icap | DISTRO | https://release-monitoring.org/project/21325 | 0.5.7 | 0.5.9 | ORPH c-icap-modules | DISTRO | https://release-monitoring.org/project/21326 | 0.5.4 | 0.5.5 | ORPH cairo | DISTRO | https://release-monitoring.org/project/00247 | 1.16.0 | 1.17.6 | cairomm | DISTRO | https://release-monitoring.org/project/07959 | 1.16.1 | 1.16.2 | cantarell | DISTRO | https://release-monitoring.org/project/10888 | 0.0.25 | 0.303.1 | ORPH capnproto | DISTRO | https://release-monitoring.org/project/11515 | 0.9.1 | 0.10.2 | ccache | DISTRO | https://release-monitoring.org/project/00257 | 3.7.12 | 4.7.2 | ORPH chartjs | DISTRO | https://release-monitoring.org/project/85785 | 3.9.1 | 4.0.0 | checkpolicy | DISTRO | https://release-monitoring.org/project/00276 | 3.3 | 20200710 | cifs-utils | DISTRO | https://release-monitoring.org/project/00287 | 6.15 | 7.0 | circus | DISTRO | https://release-monitoring.org/project/21726 | 0.16.1 | 0.17.2 | clamav | DISTRO | https://release-monitoring.org/project/00291 | 0.103.7 | 0.105.1 | clang | DISTRO | https://release-monitoring.org/project/11811 | 11.1.0 | 15.0.3 | cmake | DISTRO | https://release-monitoring.org/project/00306 | 3.22.3 | 3.24.2 | cog | DISTRO | https://release-monitoring.org/project/21333 | 0.14.1 | 0.16.1 | collectl | DISTRO | https://release-monitoring.org/project/00330 | 4.3.2 | 4.3.5 | compiler-rt | GUESS | https://release-monitoring.org/project/17705 | 11.1.0 | 900 | containerd | DISTRO | https://release-monitoring.org/project/16460 | 1.6.8 | 1.6.9 | crun | DISTRO | https://release-monitoring.org/project/96792 | 1.5 | 1.6 | cryptopp | DISTRO | https://release-monitoring.org/project/14487 | 8.6.0 | 8.7.0 | cups-pk-helper | DISTRO | https://release-monitoring.org/project/17717 | 0.2.6 | 0.2.7 | ORPH cutelyst | DISTRO | https://release-monitoring.org/project/21335 | 2.11.0 | 3.6.0 | dacapo | DISTRO | https://release-monitoring.org/project/20546 | 9.12-MR1-... | 9.12-vbump | dado | DISTRO | https://release-monitoring.org/project/58442 | 1.8.3-1 | 2.1.0-1 | datatables | DISTRO | https://release-monitoring.org/project/141588 | 1.10.20 | 1.12.1 | datatables-buttons | DISTRO | https://release-monitoring.org/project/141589 | 1.6.1 | 2.2.3 | datatables-fixedcolumns | DISTRO | https://release-monitoring.org/project/141590 | 3.3.0 | 4.1.0 | datatables-responsive | DISTRO | https://release-monitoring.org/project/141591 | 2.2.3 | 2.3.0 | dbus | DISTRO | https://release-monitoring.org/project/05356 | 1.12.24 | 1.15.2 | ORPH dbus-python | DISTRO | https://release-monitoring.org/project/00402 | 1.2.18 | 1.3.2 | ORPH dc3dd | DISTRO | https://release-monitoring.org/project/15086 | 7.2.641 | 7.2.646 | ORPH debianutils | DISTRO | https://release-monitoring.org/project/21341 | 4.11 | 5.7 | ORPH delve | DISTRO | https://release-monitoring.org/project/40149 | 1.8.0 | 1.9.1 | dialog | DISTRO | https://release-monitoring.org/project/00431 | 1.3-20220117 | 1.3-20220728 | ORPH docker-cli | DISTRO | https://release-monitoring.org/project/21076 | 20.10.19 | 20.10.21 | docker-compose | DISTRO | https://release-monitoring.org/project/06185 | 2.11.2 | 2.12.2 | docker-engine | DISTRO | https://release-monitoring.org/project/00447 | 20.10.19 | 20.10.21 | drbd-utils | DISTRO | https://release-monitoring.org/project/00462 | 9.21.4 | 9.22.0 | dt | DISTRO | https://release-monitoring.org/project/21844 | 18.32 | 21.27 | ORPH dust | DISTRO | https://release-monitoring.org/project/141344 | 0.8.1 | 0.8.3 | ORPH edk2 | DISTRO | https://release-monitoring.org/project/125953 | edk2-stab... | 202208 | efl | DISTRO | https://release-monitoring.org/project/06128 | 1.26.1 | 1.26.3 | ejabberd | DISTRO | https://release-monitoring.org/project/00667 | 21.12 | 22.10 | elfutils | DISTRO | https://release-monitoring.org/project/05679 | 0.186 | 0.187 | ORPH elixir | DISTRO | https://release-monitoring.org/project/00673 | 1.9.4 | 1.14.1 | enlightenment | DISTRO | https://release-monitoring.org/project/00698 | 0.25.1 | 0.25.4 | erlang | DISTRO | https://release-monitoring.org/project/00707 | 22.3.4.22 | 25.1.2 | erlang-eimp | DISTRO | https://release-monitoring.org/project/17060 | 1.0.21 | 1.0.22 | erlang-goldrush | DISTRO | https://release-monitoring.org/project/09692 | 0.1.9 | 0.2.0 | erlang-jose | DISTRO | https://release-monitoring.org/project/16913 | 1.11.1 | 1.11.2 | erlang-lager | DISTRO | https://release-monitoring.org/project/00727 | 3.9.1 | 3.9.2 | erlang-p1-acme | DISTRO | https://release-monitoring.org/project/45375 | 1.0.16 | 1.0.20 | erlang-p1-cache-tab | DISTRO | https://release-monitoring.org/project/08757 | 1.0.29 | 1.0.30 | erlang-p1-mqtree | DISTRO | https://release-monitoring.org/project/20220 | 1.0.14 | 1.0.15 | erlang-p1-oauth2 | DISTRO | https://release-monitoring.org/project/09302 | 0.6.10 | 0.8.0 | erlang-p1-pkix | DISTRO | https://release-monitoring.org/project/20539 | 1.0.8 | 1.0.9 | erlang-p1-sip | DISTRO | https://release-monitoring.org/project/10576 | 1.0.47 | 1.0.48 | erlang-p1-stringprep | DISTRO | https://release-monitoring.org/project/09222 | 1.0.27 | 1.0.29 | erlang-p1-stun | DISTRO | https://release-monitoring.org/project/09151 | 1.0.47 | 1.2.6 | erlang-p1-tls | DISTRO | https://release-monitoring.org/project/10455 | 1.1.13 | 1.1.16 | erlang-p1-utils | DISTRO | https://release-monitoring.org/project/08643 | 1.0.23 | 1.0.25 | erlang-p1-xmpp | DISTRO | https://release-monitoring.org/project/12752 | 1.5.6 | 1.6.0 | erlang-p1-yaml | DISTRO | https://release-monitoring.org/project/10243 | 1.0.32 | 1.0.34 | erlang-p1-yconf | DISTRO | https://release-monitoring.org/project/45378 | 1.0.12 | 1.0.14 | erlang-p1-zlib | DISTRO | https://release-monitoring.org/project/09283 | 1.0.10 | 1.0.12 | ethtool | DISTRO | https://release-monitoring.org/project/00763 | 5.19 | 6.0 | exempi | DISTRO | https://release-monitoring.org/project/00767 | 2.6.1 | 2.6.2 | exfatprogs | DISTRO | https://release-monitoring.org/project/94441 | 1.1.3 | 1.2.0 | fakeroot | DISTRO | https://release-monitoring.org/project/12048 | 1.26 | 1.29 | ORPH feh | DISTRO | https://release-monitoring.org/project/00790 | 3.7.1 | 3.9.1 | ffmpeg | DISTRO | https://release-monitoring.org/project/05405 | 4.4.3 | 5.1.2 | fftw-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-long-double | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-quad | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fftw-single | DISTRO | https://release-monitoring.org/project/00803 | 3.3.8 | 3.3.10 | ORPH fio | DISTRO | https://release-monitoring.org/project/00806 | 3.28 | 3.32 | flac | DISTRO | https://release-monitoring.org/project/00817 | 1.4.0 | 1.4.2 | flann | DISTRO | https://release-monitoring.org/project/21432 | 1.9.1 | 1.9.2 | flannel | DISTRO | https://release-monitoring.org/project/07421 | 0.14.0 | 0.20.0 | flare-engine | DISTRO | https://release-monitoring.org/project/21433 | 1.12 | 1.13.04 | flare-game | DISTRO | https://release-monitoring.org/project/21434 | 1.12 | 1.13.04 | flatbuffers | DISTRO | https://release-monitoring.org/project/16642 | 2.0.8 | 22.10.26 | flot | DISTRO | https://release-monitoring.org/project/07184 | 0.8.3 | 4.2.3 | ORPH fltk | DISTRO | https://release-monitoring.org/project/00823 | 1.3.7 | 1.3.8 | ORPH fmc | GUESS | https://release-monitoring.org/project/145761 | fsl-sdk-v2.0 | 0.2.0 | font-awesome | DISTRO | https://release-monitoring.org/project/00826 | 4.7.0 | 6.2.0 | ORPH fontconfig | DISTRO | https://release-monitoring.org/project/00827 | 2.13.1 | 2.14.1 | ORPH freeradius-server | DISTRO | https://release-monitoring.org/project/00853 | 3.2.0 | 3.2.1 | fuse-overlayfs | DISTRO | https://release-monitoring.org/project/101220 | 1.5.0 | 1.9 | gcr | DISTRO | https://release-monitoring.org/project/11801 | 3.40.0 | 4.0.0 | ORPH gdal | DISTRO | https://release-monitoring.org/project/00881 | 3.5.1 | 3.5.2 | gdk-pixbuf | DISTRO | https://release-monitoring.org/project/09533 | 2.42.9 | 2.42.10 | ORPH gerbera | DISTRO | https://release-monitoring.org/project/18420 | 1.10.0 | 1.11.0 | gettext-gnu | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH ghostscript | DISTRO | https://release-monitoring.org/project/01157 | 9.56.1 | 10.0.0 | git | DISTRO | https://release-monitoring.org/project/05350 | 2.31.4 | 2.38.1 | gitlab-runner | DISTRO | https://release-monitoring.org/project/11337 | 14.5.1 | 15.5.0 | glib-networking | DISTRO | https://release-monitoring.org/project/21353 | 2.70.1 | 2.74.0 | ORPH glibmm | DISTRO | https://release-monitoring.org/project/07960 | 2.68.2 | 2.74.0 | glm | DISTRO | https://release-monitoring.org/project/01181 | 0.9.9.5 | 0.9.9.8 | ORPH gnupg2 | DISTRO | https://release-monitoring.org/project/01215 | 2.3.7 | 2.3.8 | ORPH gnuradio | DISTRO | https://release-monitoring.org/project/01217 | 3.8.2.0 | 3.10.4.0 | gobject-introspection | DISTRO | https://release-monitoring.org/project/01223 | 1.72.0 | 1.74.0 | ORPH gocryptfs | DISTRO | https://release-monitoring.org/project/21085 | 2.2.1 | 2.3.0 | gqrx | DISTRO | https://release-monitoring.org/project/09771 | 2.14.4 | 2.15.9 | granite | DISTRO | https://release-monitoring.org/project/05410 | 6.0.0 | 7.1.0 | ORPH grantlee | DISTRO | https://release-monitoring.org/project/21448 | 5.2.0 | 5.3.0 | grpc | DISTRO | https://release-monitoring.org/project/19117 | 1.50.0 | 1.50.1 | gsettings-desktop-schemas | DISTRO | https://release-monitoring.org/project/13139 | 3.36.1 | 43.0 | ORPH gsl | DISTRO | https://release-monitoring.org/project/01267 | 2.6 | 2.7.1 | ORPH gssdp | DISTRO | https://release-monitoring.org/project/01262 | 1.4.0.1 | 1.6.0 | gst-omx | DISTRO | https://release-monitoring.org/project/21845 | 1.20.4 | 1.21.1 | ORPH gst1-devtools | DISTRO | https://release-monitoring.org/project/21856 | 1.20.4 | 1.21.1 | ORPH gst1-imx | DISTRO | https://release-monitoring.org/project/21846 | 0.13.1 | 2.1.0 | gst1-libav | DISTRO | https://release-monitoring.org/project/21848 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-bad | DISTRO | https://release-monitoring.org/project/21849 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-base | DISTRO | https://release-monitoring.org/project/21850 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-good | DISTRO | https://release-monitoring.org/project/21852 | 1.20.4 | 1.21.1 | ORPH gst1-plugins-ugly | DISTRO | https://release-monitoring.org/project/15187 | 1.20.4 | 1.21.1 | ORPH gst1-python | DISTRO | https://release-monitoring.org/project/03881 | 1.20.4 | 1.21.1 | ORPH gst1-rtsp-server | DISTRO | https://release-monitoring.org/project/21853 | 1.20.4 | 1.21.1 | ORPH gst1-shark | DISTRO | https://release-monitoring.org/project/21854 | v0.7.5 | 0.8.0 | gst1-vaapi | DISTRO | https://release-monitoring.org/project/21855 | 1.20.4 | 1.21.1 | ORPH gstd | DISTRO | https://release-monitoring.org/project/235022 | 0.14.0 | 0.15.0 | ORPH gstreamer1 | DISTRO | https://release-monitoring.org/project/01263 | 1.20.4 | 1.21.1 | ORPH gstreamer1-editing-services | DISTRO | https://release-monitoring.org/project/230920 | 1.20.4 | 1.21.1 | ORPH gtest | DISTRO | https://release-monitoring.org/project/18290 | 1.12.0 | 1.12.1 | gtkmm3 | DISTRO | https://release-monitoring.org/project/07963 | 3.22.0 | 4.8.0 | gtksourceview | DISTRO | https://release-monitoring.org/project/07724 | 3.24.7 | 5.6.1 | gupnp | DISTRO | https://release-monitoring.org/project/01281 | 1.4.3 | 1.6.0 | gupnp-av | DISTRO | https://release-monitoring.org/project/01282 | 0.14.0 | 0.14.1 | gupnp-tools | DISTRO | https://release-monitoring.org/project/01284 | 0.10.3 | 0.12.0 | gutenprint | DISTRO | https://release-monitoring.org/project/01285 | 5.2.14 | 5.3.4 | ORPH gvfs | DISTRO | https://release-monitoring.org/project/05496 | 1.48.1 | 1.50.2 | ORPH haproxy | DISTRO | https://release-monitoring.org/project/01298 | 2.6.5 | 2.6.6 | haveged | DISTRO | https://release-monitoring.org/project/11695 | 1.9.15 | 1.9.18 | hidapi | DISTRO | https://release-monitoring.org/project/05594 | 0.11.0 | 0.12.0 | ORPH hplip | DISTRO | https://release-monitoring.org/project/01327 | 3.17.10 | 3.22.6 | ORPH hwdata | DISTRO | https://release-monitoring.org/project/05387 | 0.358 | 0.363 | ORPH hyperfine | DISTRO | https://release-monitoring.org/project/18526 | 1.14.0 | 1.15.0 | ORPH ibm-sw-tpm2 | DISTRO | https://release-monitoring.org/project/18952 | 1661 | 1682 | icu | DISTRO | https://release-monitoring.org/project/16134 | 70-1 | 72-1 | ORPH ifenslave | DISTRO | https://release-monitoring.org/project/21670 | 2.9 | 2.13 | ORPH ifupdown | DISTRO | https://release-monitoring.org/project/21673 | 0.8.16 | 0.8.39 | ORPH igd2-for-linux | DISTRO | https://release-monitoring.org/project/21356 | 2.1 | 2.2 | igmpproxy | DISTRO | https://release-monitoring.org/project/21357 | 0.3 | 0.4 | imlib2 | DISTRO | https://release-monitoring.org/project/21676 | 1.7.3 | 1.9.1 | inih | DISTRO | https://release-monitoring.org/project/11600 | 55 | 56 | inotify-tools | DISTRO | https://release-monitoring.org/project/08864 | 3.20.2.2 | 3.22.6.0 | ORPH intel-gmmlib | DISTRO | https://release-monitoring.org/project/20342 | 22.2.1 | 22.3.0 | intel-mediadriver | DISTRO | https://release-monitoring.org/project/20341 | 22.5.4 | 22.6.0 | intel-mediasdk | DISTRO | https://release-monitoring.org/project/21814 | 22.5.4 | 22.6.0 | intel-microcode | DISTRO | https://release-monitoring.org/project/20614 | 20210608 | 20220809 | ORPH irqbalance | DISTRO | https://release-monitoring.org/project/01402 | 1.9.0 | 1.9.1 | irrlicht | DISTRO | https://release-monitoring.org/project/01403 | 1.8.4 | 1.8.5 | iw | DISTRO | https://release-monitoring.org/project/01410 | 5.16 | 5.19 | janet | DISTRO | https://release-monitoring.org/project/155612 | 1.25.0 | 1.25.1 | janus-gateway | DISTRO | https://release-monitoring.org/project/15715 | 1.0.3 | 1.1.0 | jasper | DISTRO | https://release-monitoring.org/project/01421 | 2.0.33 | 3.0.6 | jitterentropy-library | DISTRO | https://release-monitoring.org/project/29701 | 3.3.1 | 3.4.1 | jo | DISTRO | https://release-monitoring.org/project/18855 | 1.6 | 1.7 | jquery-datetimepicker | DISTRO | https://release-monitoring.org/project/13910 | 2.4.5 | 2.5.20 | jquery-keyboard | DISTRO | https://release-monitoring.org/project/21681 | 1.18.12 | 1.30.4 | ORPH jquery-mobile | DISTRO | https://release-monitoring.org/project/59395 | 1.4.3 | 1.4.5 | ORPH jquery-ui | DISTRO | https://release-monitoring.org/project/21815 | 1.13.1 | 1.13.2 | jquery-ui-themes | DISTRO | https://release-monitoring.org/project/21816 | 1.10.4 | 1.13.2 | json-for-modern-cpp | DISTRO | https://release-monitoring.org/project/11152 | 3.10.5 | 3.11.2 | ORPH jszip | DISTRO | https://release-monitoring.org/project/141558 | 3.10.0 | 3.10.1 | kf5-extra-cmake-modules | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-kcoreaddons | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-modemmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kf5-networkmanager-qt | DISTRO | https://release-monitoring.org/project/08762 | 5.91.0 | 5.99.0 | kodi-audiodecoder-modplug | DISTRO | https://release-monitoring.org/project/21818 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-nosefart | DISTRO | https://release-monitoring.org/project/21819 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-sidplay | DISTRO | https://release-monitoring.org/project/21820 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-snesapu | DISTRO | https://release-monitoring.org/project/21802 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-stsound | DISTRO | https://release-monitoring.org/project/21801 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audiodecoder-timidity | DISTRO | https://release-monitoring.org/project/21800 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-audiodecoder-vgmstream | DISTRO | https://release-monitoring.org/project/21799 | 19.0.0-Ma... | 20.2.0-Nexus | kodi-audioencoder-flac | DISTRO | https://release-monitoring.org/project/17755 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-lame | DISTRO | https://release-monitoring.org/project/21798 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-audioencoder-vorbis | DISTRO | https://release-monitoring.org/project/21797 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-audioencoder-wav | DISTRO | https://release-monitoring.org/project/21796 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-inputstream-adaptive | DISTRO | https://release-monitoring.org/project/21795 | 19.0.7-Ma... | 20.3.1-Nexus | kodi-inputstream-ffmpegdirect | DISTRO | https://release-monitoring.org/project/177174 | 19.0.3-Ma... | 20.5.0-Nexus | kodi-inputstream-rtmp | DISTRO | https://release-monitoring.org/project/21794 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-peripheral-joystick | DISTRO | https://release-monitoring.org/project/21793 | 19.0.3-Ma... | 20.1.2-Nexus | kodi-peripheral-xarcade | DISTRO | https://release-monitoring.org/project/21791 | 19.0.4-Ma... | 20.1.2-Nexus | kodi-pvr-argustv | DISTRO | https://release-monitoring.org/project/21788 | 19.2.1-Ma... | 20.5.0-Nexus | kodi-pvr-dvblink | DISTRO | https://release-monitoring.org/project/21787 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-dvbviewer | DISTRO | https://release-monitoring.org/project/21786 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-filmon | DISTRO | https://release-monitoring.org/project/21785 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-hdhomerun | DISTRO | https://release-monitoring.org/project/21784 | 19.1.0-Ma... | 20.4.0-Nexus | kodi-pvr-hts | DISTRO | https://release-monitoring.org/project/21783 | 19.0.6-Ma... | 20.6.0-Nexus | kodi-pvr-iptvsimple | DISTRO | https://release-monitoring.org/project/21782 | 19.2.2-Ma... | 20.6.0-Nexus | kodi-pvr-mediaportal-tvserver | DISTRO | https://release-monitoring.org/project/21781 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-mythtv | DISTRO | https://release-monitoring.org/project/21780 | 19.0.11-M... | 20.3.0-Nexus | kodi-pvr-nextpvr | DISTRO | https://release-monitoring.org/project/21779 | 19.0.4-Ma... | 20.3.0-Nexus | kodi-pvr-njoy | DISTRO | https://release-monitoring.org/project/21778 | 19.0.1-Ma... | 20.3.0-Nexus | kodi-pvr-octonet | DISTRO | https://release-monitoring.org/project/100437 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-pctv | DISTRO | https://release-monitoring.org/project/21777 | 19.0.1-Ma... | 20.4.0-Nexus | kodi-pvr-plutotv | DISTRO | https://release-monitoring.org/project/241527 | 19.0.3-Ma... | 20.3.0-Nexus | kodi-pvr-stalker | DISTRO | https://release-monitoring.org/project/21776 | 19.0.4-Ma... | 20.3.1-Nexus | kodi-pvr-vbox | DISTRO | https://release-monitoring.org/project/21775 | 19.0.0-Ma... | 20.3.0-Nexus | kodi-pvr-vdr-vnsi | DISTRO | https://release-monitoring.org/project/21774 | 19.0.5-Ma... | 20.4.0-Nexus | kodi-pvr-vuplus | DISTRO | https://release-monitoring.org/project/21773 | 19.0.0-Ma... | 20.4.0-Nexus | kodi-pvr-waipu | DISTRO | https://release-monitoring.org/project/241529 | 19.3.1-Ma... | 20.6.0-Nexus | kodi-pvr-wmc | DISTRO | https://release-monitoring.org/project/21772 | 19.0.2-Ma... | 20.3.0-Nexus | kodi-pvr-zattoo | DISTRO | https://release-monitoring.org/project/100438 | 19.7.16-M... | 20.3.0-Nexus | kodi-screensaver-asteroids | DISTRO | https://release-monitoring.org/project/21771 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-asterwave | DISTRO | https://release-monitoring.org/project/21770 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-biogenesis | DISTRO | https://release-monitoring.org/project/21768 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-cpblobs | DISTRO | https://release-monitoring.org/project/21767 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-greynetic | DISTRO | https://release-monitoring.org/project/21765 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-matrixtrails | DISTRO | https://release-monitoring.org/project/21764 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pingpong | DISTRO | https://release-monitoring.org/project/21763 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-pyro | DISTRO | https://release-monitoring.org/project/21761 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-screensaver-rsxs | DISTRO | https://release-monitoring.org/project/21760 | 19.0.2-Ma... | 20.1.0-Nexus | kodi-screensaver-stars | DISTRO | https://release-monitoring.org/project/21759 | 19.0.0-Ma... | 20.1.0-Nexus | kodi-vfs-libarchive | DISTRO | https://release-monitoring.org/project/177173 | 19.2.0-Ma... | 20.2.0-Nexus | kodi-vfs-rar | DISTRO | https://release-monitoring.org/project/21900 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-vfs-sftp | DISTRO | https://release-monitoring.org/project/21899 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-fishbmc | DISTRO | https://release-monitoring.org/project/21758 | 19.0.1-Ma... | 20.1.0-Nexus | kodi-visualisation-goom | DISTRO | https://release-monitoring.org/project/21757 | 19.0.2-Ma... | 20.1.1-Nexus | kodi-visualisation-matrix | DISTRO | https://release-monitoring.org/project/177172 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-shadertoy | DISTRO | https://release-monitoring.org/project/21756 | 19.1.2-Ma... | 20.3.0-Nexus | kodi-visualisation-spectrum | DISTRO | https://release-monitoring.org/project/21755 | 19.0.2-Ma... | 20.2.0-Nexus | kodi-visualisation-starburst | DISTRO | https://release-monitoring.org/project/85703 | 19.0.1-Ma... | 20.2.0-Nexus | kodi-visualisation-waveform | DISTRO | https://release-monitoring.org/project/21753 | 19.0.3-Ma... | 20.2.1-Nexus | lensfun | DISTRO | https://release-monitoring.org/project/01548 | 0.3.3 | 0.3.95 | less | DISTRO | https://release-monitoring.org/project/01550 | 590 | 608 | ORPH libao | DISTRO | https://release-monitoring.org/project/07629 | 1.2.0 | 1.2.2 | ORPH libapparmor | DISTRO | https://release-monitoring.org/project/94819 | 3.0.4 | 3.1.1 | libblockdev | DISTRO | https://release-monitoring.org/project/09397 | 2.26 | 2.28-1 | ORPH libbluray | DISTRO | https://release-monitoring.org/project/01565 | 1.3.1 | 1.3.3 | libbsd | DISTRO | https://release-monitoring.org/project/01567 | 0.11.3 | 0.11.7 | libcap | DISTRO | https://release-monitoring.org/project/01569 | 2.65 | 2.66 | libcgroup | DISTRO | https://release-monitoring.org/project/01575 | 0.42.2 | 3.0.0 | libdeflate | DISTRO | https://release-monitoring.org/project/242778 | 1.12 | 1.14 | libebml | DISTRO | https://release-monitoring.org/project/07879 | 1.4.2 | 1.4.4 | libedit | DISTRO | https://release-monitoring.org/project/01599 | 20210910-3.1 | 20221030-3.1 | libevdev | DISTRO | https://release-monitoring.org/project/20540 | 1.12.1 | 1.13.0 | libfreeglut | DISTRO | https://release-monitoring.org/project/00846 | 3.2.2 | 3.4.0 | libfuse | GUESS | https://release-monitoring.org/project/00861 | 2.9.9 | 3.12.0 | ORPH libfuse3 | DISTRO | https://release-monitoring.org/project/00861 | 3.11.0 | 3.12.0 | libgdiplus | DISTRO | https://release-monitoring.org/project/06440 | 6.0.5 | 6.1 | libglade | DISTRO | https://release-monitoring.org/project/01174 | 2.6.4 | 3.40.0 | ORPH libglfw | DISTRO | https://release-monitoring.org/project/01180 | 3.3.6 | 3.3.8 | libglib2 | DISTRO | https://release-monitoring.org/project/10024 | 2.72.3 | 2.74.1 | libglvnd | DISTRO | https://release-monitoring.org/project/12098 | 1.4.0 | 1.5.0 | ORPH libgpg-error | DISTRO | https://release-monitoring.org/project/01628 | 1.45 | 1.46 | ORPH libgpgme | DISTRO | https://release-monitoring.org/project/01239 | 1.17.1 | 1.18.0 | ORPH libgphoto2 | DISTRO | https://release-monitoring.org/project/12558 | 2.5.27 | 2.5.30 | ORPH libgsasl | DISTRO | https://release-monitoring.org/project/01563 | 1.10.0 | 2.2.0 | ORPH libgsm | DISTRO | https://release-monitoring.org/project/12587 | 1.0.19 | 1.0.22 | libgtk2 | DISTRO | https://release-monitoring.org/project/13942 | 2.24.33 | 4.8.2 | libhtp | DISTRO | https://release-monitoring.org/project/01632 | 0.5.40 | 0.5.41 | libiberty | DISTRO | https://release-monitoring.org/project/07981 | 2.32 | 2.39 | libical | DISTRO | https://release-monitoring.org/project/01637 | 1.0.1 | 3.0.16 | libiconv | DISTRO | https://release-monitoring.org/project/10656 | 1.15 | 1.17 | ORPH libimxvpuapi | DISTRO | https://release-monitoring.org/project/21479 | 0.10.3 | 2.2.1 | libinput | DISTRO | https://release-monitoring.org/project/05781 | 1.20.1 | 1.21.0 | libksba | DISTRO | https://release-monitoring.org/project/01649 | 1.6.0 | 1.6.2 | ORPH libmatroska | DISTRO | https://release-monitoring.org/project/01657 | 1.6.3 | 1.7.1 | libmdbx | DISTRO | https://release-monitoring.org/project/141559 | 0.11.12 | 0.12.1 | libmodsecurity | DISTRO | https://release-monitoring.org/project/68638 | 3.0.7 | 3.0.8 | libmspack | DISTRO | https://release-monitoring.org/project/16827 | 0.10.1alpha | 1.9.1 | libnetconf2 | DISTRO | https://release-monitoring.org/project/31639 | 2.1.11 | 2.1.18 | libnfs | DISTRO | https://release-monitoring.org/project/07325 | 4.0.0 | 5.0.2 | ORPH libnpupnp | DISTRO | https://release-monitoring.org/project/75209 | 4.2.2 | 5.0.0 | libolm | DISTRO | https://release-monitoring.org/project/29706 | 3.2.9 | 3.2.13 | libopenh264 | DISTRO | https://release-monitoring.org/project/21365 | 2.2.0 | 2.3.1 | libopenssl | DISTRO | https://release-monitoring.org/project/20333 | 1.1.1q | 1.1.1r | libpeas | DISTRO | https://release-monitoring.org/project/06871 | 1.32.0 | 1.34.0 | ORPH libpqxx | DISTRO | https://release-monitoring.org/project/21367 | 6.4.5 | 7.7.4 | libressl | DISTRO | https://release-monitoring.org/project/12102 | 3.5.3 | 3.6.0 | ORPH librsvg | DISTRO | https://release-monitoring.org/project/05420 | 2.50.7 | 2.54.5 | libselinux | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | libsemanage | DISTRO | https://release-monitoring.org/project/01718 | 3.3 | 20200710 | libsepol | DISTRO | https://release-monitoring.org/project/01719 | 3.3 | 20200710 | libsoup | DISTRO | https://release-monitoring.org/project/11483 | 2.74.2 | 3.2.1 | libtextstyle | DISTRO | https://release-monitoring.org/project/00898 | 0.20.1 | 0.21.1 | ORPH libtool | DISTRO | https://release-monitoring.org/project/01741 | 2.4.6 | 2.4.7 | ORPH libtorrent-rasterbar | DISTRO | https://release-monitoring.org/project/04166 | 1.2.15 | 2.0.8 | libupnp | DISTRO | https://release-monitoring.org/project/21315 | 1.14.13 | 1.14.14 | libupnpp | DISTRO | https://release-monitoring.org/project/15849 | 0.21.0 | 0.22.2 | ORPH libuv | DISTRO | https://release-monitoring.org/project/10784 | 1.43.0 | 1.44.2 | libvips | DISTRO | https://release-monitoring.org/project/05097 | 8.10.6 | 8.13.2 | libvirt | DISTRO | https://release-monitoring.org/project/224041 | 7.10.0 | 8.8.0 | libwpe | DISTRO | https://release-monitoring.org/project/17789 | 1.12.3 | 1.14.0 | libxkbcommon | DISTRO | https://release-monitoring.org/project/01780 | 1.4.0 | 1.4.1 | libxmlrpc | DISTRO | https://release-monitoring.org/project/09024 | r3119 | 1.54.06 | libyang | DISTRO | https://release-monitoring.org/project/18554 | 2.0.194 | 2.0.231 | lilv | DISTRO | https://release-monitoring.org/project/01818 | 0.24.12 | 0.24.20 | links | DISTRO | https://release-monitoring.org/project/01822 | 2.26 | 2.28 | ORPH linphone | DISTRO | https://release-monitoring.org/project/01823 | 4.4.8 | 5.1.63 | ORPH linux-firmware | DISTRO | https://release-monitoring.org/project/141464 | 20220310 | 20221012 | live555 | DISTRO | https://release-monitoring.org/project/12414 | 2021.05.03 | 2022.10.01 | ORPH lld | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | llvm | DISTRO | https://release-monitoring.org/project/01830 | 11.1.0 | 15.0.3 | log4cxx | DISTRO | https://release-monitoring.org/project/15330 | 0.12.1 | 0.13.0 | lpty | DISTRO | https://release-monitoring.org/project/11671 | 1.0.1-1 | 1.2.2 | lsof | DISTRO | https://release-monitoring.org/project/01844 | 4.96.3 | 4.96.4 | ORPH ltris | DISTRO | https://release-monitoring.org/project/21503 | 1.2 | 1.2.6 | lttng-babeltrace | DISTRO | https://release-monitoring.org/project/00155 | 1.5.7 | 1.5.8 | lttng-libust | DISTRO | https://release-monitoring.org/project/07135 | 2.13.1 | 2.13.5 | lttng-modules | DISTRO | https://release-monitoring.org/project/07141 | 2.13.1 | 2.13.7 | lttng-tools | DISTRO | https://release-monitoring.org/project/07136 | 2.13.2 | 2.13.8 | lua | DISTRO | https://release-monitoring.org/project/01847 | 5.1.5 | 5.4.4 | lua-lyaml | DISTRO | https://release-monitoring.org/project/11733 | 6.2.7 | 6.2.8 | lua-resty-http | DISTRO | https://release-monitoring.org/project/13887 | 0.15-0 | 0.16.1 | luv | DISTRO | https://release-monitoring.org/project/21510 | 1.43.0-0 | 1.44.2-1 | ORPH luvi | DISTRO | https://release-monitoring.org/project/21512 | 2.13.0 | 2.14.0 | ORPH lvm2 | DISTRO | https://release-monitoring.org/project/05354 | 2.03.14 | 2.03.16 | ORPH lxc | DISTRO | https://release-monitoring.org/project/01860 | 4.0.12 | 5.0.1 | lynx | DISTRO | https://release-monitoring.org/project/01863 | 2.8.9rel.1 | 2.9.0 | lzma-alone | DISTRO | https://release-monitoring.org/project/242840 | 9.22 | 2201 | ORPH lzop | DISTRO | https://release-monitoring.org/project/07486 | 1.03 | 1.04 | make | DISTRO | https://release-monitoring.org/project/01877 | 4.2.1 | 4.3 | ORPH mariadb | DISTRO | https://release-monitoring.org/project/01887 | 10.3.36 | 10.10.1 | ORPH mbedtls | DISTRO | https://release-monitoring.org/project/13824 | 2.28.1 | 3.2.1 | mediastreamer | DISTRO | https://release-monitoring.org/project/21746 | 4.4.8 | 5.1.67 | ORPH memcached | DISTRO | https://release-monitoring.org/project/01965 | 1.6.16 | 1.6.17 | ORPH memtest86 | DISTRO | https://release-monitoring.org/project/01966 | 5.01 | 6.00 | mesa3d-demos | DISTRO | https://release-monitoring.org/project/16781 | 8.4.0 | 8.5.0 | metacity | DISTRO | https://release-monitoring.org/project/15392 | 2.25.1 | 3.46.0 | ORPH mfgtools | DISTRO | https://release-monitoring.org/project/21519 | 0.02 | 2.8.0 | mimic | DISTRO | https://release-monitoring.org/project/21521 | 1.1.0 | 1.3.0.1 | minetest | DISTRO | https://release-monitoring.org/project/01978 | 5.5.1 | 5.6.1 | minetest-game | DISTRO | https://release-monitoring.org/project/21522 | 5.5.1 | 5.6.1 | moarvm | DISTRO | https://release-monitoring.org/project/21100 | 2022.06 | 2022.07 | mobile-broadband-provider-info | DISTRO | https://release-monitoring.org/project/10267 | 20190618 | 20220725 | ORPH moby-buildkit | DISTRO | https://release-monitoring.org/project/20836 | 0.10.0 | 0.10.5 | mongodb | DISTRO | https://release-monitoring.org/project/02008 | 4.2.18 | 6.1.0 | monit | DISTRO | https://release-monitoring.org/project/05483 | 5.26.0 | 5.32.0 | mono | DISTRO | https://release-monitoring.org/project/06360 | 6.12.0.122 | 6.12.0.188 | mpd | DISTRO | https://release-monitoring.org/project/14864 | 0.23.9 | 0.23.10 | mpg123 | DISTRO | https://release-monitoring.org/project/12413 | 1.25.15 | 1.31.0 | ORPH mpv | DISTRO | https://release-monitoring.org/project/05348 | 0.33.1 | 0.34.1 | msgpack | DISTRO | https://release-monitoring.org/project/12278 | 3.3.0 | 4.1.2 | msmtp | DISTRO | https://release-monitoring.org/project/02024 | 1.8.14 | 1.8.22 | mstpd | DISTRO | https://release-monitoring.org/project/235098 | 0.1.0 | 0.05 | mtools | DISTRO | https://release-monitoring.org/project/02028 | 4.0.38 | 4.0.42 | multipath-tools | DISTRO | https://release-monitoring.org/project/00424 | 0.9.0 | 0.9.3 | mupdf | DISTRO | https://release-monitoring.org/project/02034 | 1.18.0 | 1.20.3 | ncdu | DISTRO | https://release-monitoring.org/project/06045 | 1.17 | 2.2.1 | ncurses | DISTRO | https://release-monitoring.org/project/02057 | 6.1 | 6.3-20221029 | ORPH neon | DISTRO | https://release-monitoring.org/project/07604 | 0.32.2 | 0.32.4 | ORPH nerdctl | DISTRO | https://release-monitoring.org/project/242901 | 0.17.1 | 1.0.0 | netcat-openbsd | DISTRO | https://release-monitoring.org/project/21534 | 1.218 | 1.219 | ORPH netdata | DISTRO | https://release-monitoring.org/project/11046 | 1.33.1 | 1.36.1 | netopeer2 | DISTRO | https://release-monitoring.org/project/114978 | 2.1.23 | 2.1.36 | netsnmp | DISTRO | https://release-monitoring.org/project/02062 | 5.9 | 5.9.3 | ORPH network-manager | DISTRO | https://release-monitoring.org/project/21197 | 1.36.4 | 1.40.2 | ORPH network-manager-openvpn | DISTRO | https://release-monitoring.org/project/69977 | 1.8.14 | 1.10.0 | nghttp2 | DISTRO | https://release-monitoring.org/project/08651 | 1.41.0 | 1.50.0 | nginx | DISTRO | https://release-monitoring.org/project/05413 | 1.20.1 | 1.23.2 | nginx-modsecurity | DISTRO | https://release-monitoring.org/project/68639 | 1.0.2 | 1.0.3 | ninja | DISTRO | https://release-monitoring.org/project/02089 | 1.10.2.g5... | 1.11.1 | nmap | DISTRO | https://release-monitoring.org/project/02096 | 7.92 | 7.93 | ORPH nodejs | DISTRO | https://release-monitoring.org/project/08251 | 16.17.1 | 19.0.0 | noip | DISTRO | https://release-monitoring.org/project/21539 | 2.1.9 | 3.0.0 | ORPH nuttcp | DISTRO | https://release-monitoring.org/project/02511 | 6.1.2 | 8.2.2 | nvidia-driver | DISTRO | https://release-monitoring.org/project/21843 | 390.151 | 390.154 | nvidia-modprobe | DISTRO | https://release-monitoring.org/project/141657 | 450.57 | 520.56.06 | ORPH nvme | DISTRO | https://release-monitoring.org/project/09074 | 1.12 | 2.2 | ORPH ofono | DISTRO | https://release-monitoring.org/project/16859 | 1.34 | 2.0 | ogre | DISTRO | https://release-monitoring.org/project/33334 | v1.12.12 | 13.5.0 | openal | DISTRO | https://release-monitoring.org/project/08172 | 1.22.0 | 1.22.2 | opencl-clhpp | DISTRO | https://release-monitoring.org/project/271141 | 2.0.16 | 2022.09.30 | opencore-amr | DISTRO | https://release-monitoring.org/project/21548 | 0.1.5 | 0.1.6 | ORPH opencv3 | DISTRO | https://release-monitoring.org/project/06615 | 3.4.17 | 4.6.0 | openfpgaloader | DISTRO | https://release-monitoring.org/project/241709 | 0.6.1 | 0.9.1 | openipmi | DISTRO | https://release-monitoring.org/project/02549 | 2.0.32 | 2.0.33 | ORPH openjdk | GUESS | https://release-monitoring.org/project/176098 | 11.0.14.1+1 | 20+21 | openmpi | DISTRO | https://release-monitoring.org/project/02554 | 4.0.0 | 4.1.4 | ORPH openpowerlink | DISTRO | https://release-monitoring.org/project/21550 | 2.7.1 | 2.7.2 | openrc | DISTRO | https://release-monitoring.org/project/11687 | 0.43.3 | 0.45.2 | openvmtools | DISTRO | https://release-monitoring.org/project/10998 | 11.3.5-18... | 12.1.0 | opkg | DISTRO | https://release-monitoring.org/project/59397 | 0.4.5 | 0.6.0 | ORPH opkg-utils | DISTRO | https://release-monitoring.org/project/59396 | 0.4.5 | 0.5.0 | optee-benchmark | DISTRO | https://release-monitoring.org/project/21555 | 3.18.0 | 3.19.0 | optee-client | DISTRO | https://release-monitoring.org/project/21556 | 3.18.0 | 3.19.0 | optee-examples | DISTRO | https://release-monitoring.org/project/21557 | 3.18.0 | 3.19.0 | optee-test | DISTRO | https://release-monitoring.org/project/21558 | 3.18.0 | 3.19.0 | oracle-mysql | DISTRO | https://release-monitoring.org/project/00334 | 5.1.73 | 8.0.31 | ORPH ortp | DISTRO | https://release-monitoring.org/project/21691 | 4.4.8 | 5.1.67 | ORPH osm2pgsql | DISTRO | https://release-monitoring.org/project/02575 | 1.7.0 | 1.7.1 | pango | DISTRO | https://release-monitoring.org/project/11783 | 1.50.10 | 1.50.11 | ORPH pangomm | DISTRO | https://release-monitoring.org/project/07958 | 2.48.2 | 2.50.1 | parprouted | DISTRO | https://release-monitoring.org/project/10309 | 0.7 | 0.65 | ORPH parted | DISTRO | https://release-monitoring.org/project/02596 | 3.4 | 3.5 | patchelf | DISTRO | https://release-monitoring.org/project/02598 | 0.13 | 0.16.1 | ORPH pax-utils | DISTRO | https://release-monitoring.org/project/02601 | 1.2.6 | 1.3.5 | ORPH pcm-tools | DISTRO | https://release-monitoring.org/project/21377 | 202110 | 202210 | ORPH pdbg | DISTRO | https://release-monitoring.org/project/21378 | 3.5 | 3.6 | perl | DISTRO | https://release-monitoring.org/project/13599 | 5.34.1 | 5.36.0 | perl-crypt-cbc | DISTRO | https://release-monitoring.org/project/11930 | 2.33 | 3.04 | perl-dbd-mysql | DISTRO | https://release-monitoring.org/project/02807 | 4.046 | 4.050 | perl-exporter-tiny | DISTRO | https://release-monitoring.org/project/11846 | 1.002002 | 1.004004 | perl-file-listing | DISTRO | https://release-monitoring.org/project/02892 | 6.14 | 6.15 | perl-file-sharedir-install | DISTRO | https://release-monitoring.org/project/11851 | 0.13 | 0.14 | perl-html-parser | DISTRO | https://release-monitoring.org/project/02967 | 3.76 | 3.79 | perl-http-daemon | DISTRO | https://release-monitoring.org/project/02975 | 6.12 | 6.14 | perl-http-message | DISTRO | https://release-monitoring.org/project/02977 | 6.37 | 6.44 | perl-json-maybexs | DISTRO | https://release-monitoring.org/project/11953 | 1.004003 | 1.004004 | perl-mail-dkim | DISTRO | https://release-monitoring.org/project/11868 | 1.20200824 | 1.20220520 | perl-mime-tools | DISTRO | https://release-monitoring.org/project/11809 | 5.509 | 5.510 | perl-mojolicious | DISTRO | https://release-monitoring.org/project/05966 | 9.26 | 9.28 | perl-mojolicious-plugin-aut... | DISTRO | https://release-monitoring.org/project/21729 | 1.37 | 1.39 | perl-net-dns | DISTRO | https://release-monitoring.org/project/03147 | 1.34 | 1.35 | perl-net-ssh2 | DISTRO | https://release-monitoring.org/project/03163 | 0.72 | 0.73 | perl-net-ssleay | DISTRO | https://release-monitoring.org/project/06575 | 1.85 | 1.92 | perl-package-stash | DISTRO | https://release-monitoring.org/project/11885 | 0.39 | 0.40 | perl-path-tiny | DISTRO | https://release-monitoring.org/project/11962 | 0.124 | 0.130 | perl-plack | DISTRO | https://release-monitoring.org/project/06578 | 1.0048 | 1.0050 | perl-sys-cpu | DISTRO | https://release-monitoring.org/project/14338 | 0.52 | 0.61 | perl-type-tiny | DISTRO | https://release-monitoring.org/project/14406 | 1.012004 | 2.000001 | perl-uri | DISTRO | https://release-monitoring.org/project/03485 | 5.12 | 5.16 | perl-xml-libxml | DISTRO | https://release-monitoring.org/project/03527 | 2.0134 | 2.0208 | php-amqp | DISTRO | https://release-monitoring.org/project/15603 | 1.10.2 | 1.11.0 | php-apcu | DISTRO | https://release-monitoring.org/project/11010 | 5.1.20 | 5.1.22 | php-gnupg | DISTRO | https://release-monitoring.org/project/21743 | 1.5.0 | 1.5.1 | ORPH php-memcached | DISTRO | https://release-monitoring.org/project/17400 | 3.1.5 | 3.2.0 | ORPH php-pam | DISTRO | https://release-monitoring.org/project/241707 | 2.2.3 | 2.2.4 | php-xdebug | DISTRO | https://release-monitoring.org/project/13302 | 3.0.4 | 3.1.5 | pigpio | DISTRO | https://release-monitoring.org/project/21577 | 79 | 7301 | pixman | DISTRO | https://release-monitoring.org/project/03648 | 0.40.0 | 0.42.0 | pkgconf | DISTRO | https://release-monitoring.org/project/12753 | 1.6.3 | 1.9.3 | ORPH poco | DISTRO | https://release-monitoring.org/project/05418 | 1.12.2 | 1.12.3 | policycoreutils | DISTRO | https://release-monitoring.org/project/03680 | 3.2 | 20200710 | polkit | DISTRO | https://release-monitoring.org/project/03682 | 121 | 122 | postgis | DISTRO | https://release-monitoring.org/project/03694 | 3.2.2 | 3.3.1 | powertop | DISTRO | https://release-monitoring.org/project/03702 | 2.13 | 2.15 | procps-ng | DISTRO | https://release-monitoring.org/project/03708 | 3.3.17 | 4.0.1 | ORPH proftpd | DISTRO | https://release-monitoring.org/project/07609 | 1.3.6e | 1.3.7e | proj | DISTRO | https://release-monitoring.org/project/21570 | 8.1.1 | 9.1.0 | prosody | DISTRO | https://release-monitoring.org/project/03709 | 0.11.13 | 0.12.1 | protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.8 | 21.9 | pru-software-support | DISTRO | https://release-monitoring.org/project/21825 | 6.0.1 | 6.1.0 | psmisc | DISTRO | https://release-monitoring.org/project/03721 | 23.4 | 23.5 | ORPH ptpd | GUESS | https://release-monitoring.org/project/03726 | 1.1.0 | 2.3.1 | ORPH putty | DISTRO | https://release-monitoring.org/project/05749 | 0.76 | 0.78 | python-aiocoap | DISTRO | https://release-monitoring.org/project/21243 | 0.4.1 | 0.4.4 | python-aiohttp-remotes | DISTRO | https://release-monitoring.org/project/21248 | 1.1.0 | 1.2.0 | python-aioprocessing | DISTRO | https://release-monitoring.org/project/209604 | 2.0.0 | 2.0.1 | python-alembic | DISTRO | https://release-monitoring.org/project/03766 | 1.8.0 | 1.8.1 | python-alsaaudio | DISTRO | https://release-monitoring.org/project/10072 | 0.8.4 | 0.9.2 | python-arrow | DISTRO | https://release-monitoring.org/project/05314 | 1.2.0 | 1.2.3 | python-asgiref | DISTRO | https://release-monitoring.org/project/18462 | 3.3.4 | 3.5.2 | python-automat | DISTRO | https://release-monitoring.org/project/15101 | 20.2.0 | 22.10.0 | python-avro | DISTRO | https://release-monitoring.org/project/59411 | 1.11.0 | 1.11.1 | python-babel | DISTRO | https://release-monitoring.org/project/11984 | 2.9.1 | 2.10.3 | python-bcrypt | DISTRO | https://release-monitoring.org/project/09047 | 3.2.0 | 4.0.1 | python-beautifulsoup4 | DISTRO | https://release-monitoring.org/project/03779 | 4.10.0 | 4.11.1 | python-bleak | DISTRO | https://release-monitoring.org/project/26271 | 0.12.1 | 0.19.1 | python-bluezero | DISTRO | https://release-monitoring.org/project/21929 | 0.6.0 | 0.7.1 | python-boto3 | DISTRO | https://release-monitoring.org/project/08778 | 1.24.8 | 1.25.4 | python-botocore | DISTRO | https://release-monitoring.org/project/08748 | 1.27.8 | 1.28.4 | python-canopen | DISTRO | https://release-monitoring.org/project/23230 | 1.0.0 | 2.0.0b1 | python-channels | DISTRO | https://release-monitoring.org/project/21937 | 2.3.1 | 4.0.0b1 | python-channels-redis | DISTRO | https://release-monitoring.org/project/21936 | 2.4.1 | 4.0.0b2 | python-cheroot | DISTRO | https://release-monitoring.org/project/20163 | 8.2.1 | 8.6.0 | python-cherrypy | DISTRO | https://release-monitoring.org/project/03799 | 12.0.1 | 18.8.0 | python-colorama | DISTRO | https://release-monitoring.org/project/03807 | 0.4.4 | 0.4.6 | python-colorlog | DISTRO | https://release-monitoring.org/project/12509 | 6.4.1 | 6.7.0 | python-configshell-fb | DISTRO | https://release-monitoring.org/project/19734 | 1.1.29 | 1.5 | python-crossbar | DISTRO | https://release-monitoring.org/project/21696 | 21.3.1 | 22.6.1 | python-cryptography | DISTRO | https://release-monitoring.org/project/05532 | 38.0.1 | 38.0.2 | python-cssselect | DISTRO | https://release-monitoring.org/project/11593 | 1.1.0 | 1.2.0 | python-cython | DISTRO | https://release-monitoring.org/project/12679 | 0.29.32 | 3.0.0a11 | python-daphne | DISTRO | https://release-monitoring.org/project/21939 | 2.4.1 | 4.0.0b1 | python-dataproperty | DISTRO | https://release-monitoring.org/project/21697 | 0.54.2 | 0.55.0 | python-decorator | DISTRO | https://release-monitoring.org/project/03819 | 5.1.0 | 5.1.1 | python-dialog3 | DISTRO | https://release-monitoring.org/project/03823 | 3.5.1 | 3.5.3 | python-django | DISTRO | https://release-monitoring.org/project/03828 | 4.0.8 | 4.1.2 | python-dnspython | DISTRO | https://release-monitoring.org/project/13190 | 2.1.0 | 2.2.1 | python-docker | DISTRO | https://release-monitoring.org/project/03847 | 4.1.0 | 6.0.0b2 | python-docutils | DISTRO | https://release-monitoring.org/project/03849 | 0.18.1 | 0.19 | python-dominate | DISTRO | https://release-monitoring.org/project/19648 | 2.6.0 | 2.7.0 | python-dpkt | DISTRO | https://release-monitoring.org/project/10497 | 1.9.7.2 | 1.9.8 | python-dtschema | DISTRO | https://release-monitoring.org/project/100908 | 2022.8 | 2022.9 | python-ecdsa | DISTRO | https://release-monitoring.org/project/08370 | 0.17.0 | 0.18.0 | python-engineio | DISTRO | https://release-monitoring.org/project/15064 | 4.2.1 | 4.3.4 | python-entrypoints | DISTRO | https://release-monitoring.org/project/12081 | 0.3 | 0.4 | python-filelock | DISTRO | https://release-monitoring.org/project/11739 | 3.3.0 | 3.8.0 | python-flask | DISTRO | https://release-monitoring.org/project/03867 | 2.1.2 | 2.2.2 | python-flask-jsonrpc | DISTRO | https://release-monitoring.org/project/21698 | 2.2.1 | 2.2.2 | python-flask-sqlalchemy | DISTRO | https://release-monitoring.org/project/05701 | 2.5.1 | 3.0.2 | python-flatbuffers | DISTRO | https://release-monitoring.org/project/85010 | 2.0.7 | 22.10.26 | python-git | DISTRO | https://release-monitoring.org/project/06459 | 3.1.24 | 3.1.29 | python-gitdb2 | DISTRO | https://release-monitoring.org/project/12730 | 4.0.7 | 4.0.9 | python-gobject | DISTRO | https://release-monitoring.org/project/13158 | 3.42.1 | 3.42.2 | python-httplib2 | DISTRO | https://release-monitoring.org/project/03887 | 0.19.1 | 0.21.0 | python-humanize | DISTRO | https://release-monitoring.org/project/19799 | 3.11.0 | 4.0.0 | python-ifaddr | DISTRO | https://release-monitoring.org/project/19908 | 0.1.7 | 0.2.0 | python-incremental | DISTRO | https://release-monitoring.org/project/15162 | 21.3.0 | 22.10.0 | python-ipython | DISTRO | https://release-monitoring.org/project/01399 | 7.31.1 | 8.5.0 | python-iso8601 | DISTRO | https://release-monitoring.org/project/17228 | 0.1.14 | 1.1.0 | python-iwlib | DISTRO | https://release-monitoring.org/project/51611 | 1.5 | 1.7.0 | python-jaraco-classes | DISTRO | https://release-monitoring.org/project/20150 | 2.0 | 3.2.3 | python-jaraco-functools | DISTRO | https://release-monitoring.org/project/20165 | 2.0 | 3.5.2 | python-jmespath | DISTRO | https://release-monitoring.org/project/08749 | 1.0.0 | 1.0.1 | python-keyring | DISTRO | https://release-monitoring.org/project/03901 | 19.2.0 | 23.9.3 | python-kiwisolver | DISTRO | https://release-monitoring.org/project/16910 | 1.1.0 | 1.4.4 | python-lark | DISTRO | https://release-monitoring.org/project/140595 | 1.1.2 | 1.1.3 | python-libusb1 | DISTRO | https://release-monitoring.org/project/12301 | 2.0.1 | 3.0.0 | python-mako | DISTRO | https://release-monitoring.org/project/03915 | 1.1.5 | 1.2.3 | python-markdown2 | DISTRO | https://release-monitoring.org/project/03917 | 2.4.1 | 2.4.6 | python-markupsafe | DISTRO | https://release-monitoring.org/project/03918 | 2.0.1 | 2.1.1 | python-matplotlib | DISTRO | https://release-monitoring.org/project/03919 | 3.4.3 | 3.6.1 | python-mbstrdecoder | DISTRO | https://release-monitoring.org/project/21702 | 1.1.0 | 1.1.1 | python-memory-profiler | DISTRO | https://release-monitoring.org/project/38508 | 0.58.0 | 0.60.0 | python-mistune | DISTRO | https://release-monitoring.org/project/06189 | 0.8.4 | 2.0.4 | python-more-itertools | DISTRO | https://release-monitoring.org/project/12201 | 8.10.0 | 9.0.0 | python-msgfy | DISTRO | https://release-monitoring.org/project/29716 | 0.1.0 | 0.2.0 | python-mutagen | DISTRO | https://release-monitoring.org/project/03931 | 1.45.1 | 1.46.0 | python-networkmanager | DISTRO | https://release-monitoring.org/project/12909 | 2.1 | 2.2 | python-networkx | DISTRO | https://release-monitoring.org/project/07791 | 2.6.3 | 3.0b1 | python-oauthlib | DISTRO | https://release-monitoring.org/project/05377 | 3.1.1 | 3.2.2 | python-opcua-asyncio | DISTRO | https://release-monitoring.org/project/131612 | 0.8.4 | 1.0.0 | python-orjson | DISTRO | https://release-monitoring.org/project/31737 | 3.7.11 | 3.8.1 | python-paramiko | DISTRO | https://release-monitoring.org/project/03954 | 2.10.3 | 2.11.0 | python-pathpy | DISTRO | https://release-monitoring.org/project/21703 | 12.0.1 | 12.5.0 | python-pathvalidate | DISTRO | https://release-monitoring.org/project/21704 | 2.5.0 | 2.5.2 | python-pbr | DISTRO | https://release-monitoring.org/project/03960 | 5.6.0 | 5.11.0 | python-pillow | DISTRO | https://release-monitoring.org/project/07974 | 9.2.0 | 9.3.0 | python-pip | DISTRO | https://release-monitoring.org/project/06529 | 21.2.4 | 22.3 | python-portend | DISTRO | https://release-monitoring.org/project/20203 | 2.5 | 3.1.0 | python-prompt-toolkit | DISTRO | https://release-monitoring.org/project/08742 | 3.0.20 | 3.0.31 | python-protobuf | DISTRO | https://release-monitoring.org/project/03715 | 21.8 | 21.9 | python-psutil | DISTRO | https://release-monitoring.org/project/03978 | 5.8.0 | 5.9.3 | python-psycopg2 | DISTRO | https://release-monitoring.org/project/03979 | 2.9.1 | 2.9.5 | python-pudb | DISTRO | https://release-monitoring.org/project/03980 | 2021.1 | 2022.1.2 | python-py | DISTRO | https://release-monitoring.org/project/03981 | 1.10.0 | 1.11.0 | python-pydal | DISTRO | https://release-monitoring.org/project/21582 | 20220814.1 | 20220916.1 | python-pydantic | DISTRO | https://release-monitoring.org/project/29768 | 1.8.2 | 1.10.2 | python-pyelftools | DISTRO | https://release-monitoring.org/project/16219 | 0.27 | 0.29 | python-pyftpdlib | DISTRO | https://release-monitoring.org/project/17026 | 1.5.6 | 1.5.7 | python-pygame | DISTRO | https://release-monitoring.org/project/17480 | d61ea8eabd56 | 2.1.2 | python-pygments | DISTRO | https://release-monitoring.org/project/03986 | 2.7.4 | 2.13.0 | python-pyhamcrest | DISTRO | https://release-monitoring.org/project/11633 | 2.0.2 | 2.0.4 | python-pyicu | DISTRO | https://release-monitoring.org/project/12004 | 1.9.7 | 2.10.2 | python-pyjwt | DISTRO | https://release-monitoring.org/project/05653 | 2.4.0 | 2.6.0 | python-pylibftdi | DISTRO | https://release-monitoring.org/project/21583 | 0.18.1 | 0.20.0 | python-pymodbus | DISTRO | https://release-monitoring.org/project/15600 | 2.2.0 | 3.0.0 | python-pymupdf | DISTRO | https://release-monitoring.org/project/17320 | 1.18.14 | 1.20.2 | python-pyopenssl | DISTRO | https://release-monitoring.org/project/05535 | 22.0.0 | 22.1.0 | python-pyparted | DISTRO | https://release-monitoring.org/project/15558 | 3.11.6 | 3.12.0 | python-pyqt5 | DISTRO | https://release-monitoring.org/project/20104 | 5.15.6 | 5.15.7 | python-pyroute2 | DISTRO | https://release-monitoring.org/project/20081 | 0.5.7 | 0.7.3 | python-pyrsistent | DISTRO | https://release-monitoring.org/project/19676 | 0.18.1 | 0.19.1 | python-pysmb | DISTRO | https://release-monitoring.org/project/21589 | 1.2.7 | 1.2.8 | python-pytablereader | DISTRO | https://release-monitoring.org/project/21592 | 0.26.1 | 0.31.3 | python-pytablewriter | DISTRO | https://release-monitoring.org/project/21593 | 0.46.1 | 0.64.2 | python-pytest | DISTRO | https://release-monitoring.org/project/03765 | 7.1.2 | 7.2.0 | python-pytest-asyncio | DISTRO | https://release-monitoring.org/project/07273 | 0.19.0 | 0.20.1 | python-pytz | DISTRO | https://release-monitoring.org/project/06537 | 2021.3 | 2022.5 | python-pyudev | DISTRO | https://release-monitoring.org/project/08485 | 0.22.0 | 0.24.0 | python-pyzmq | DISTRO | https://release-monitoring.org/project/04104 | 24.0.1 | 25.0.0b1 | python-redis | DISTRO | https://release-monitoring.org/project/03992 | 3.5.3 | 4.3.4 | python-reentry | DISTRO | https://release-monitoring.org/project/21596 | 1.3.2 | 1.3.3 | python-regex | DISTRO | https://release-monitoring.org/project/05548 | 2021.4.4 | 2022.10.31 | python-requests-oauthlib | DISTRO | https://release-monitoring.org/project/11803 | 1.3.0 | 1.3.1 | python-requests-toolbelt | DISTRO | https://release-monitoring.org/project/05665 | 0.9.1 | 0.10.1 | python-rpi-gpio | DISTRO | https://release-monitoring.org/project/12026 | 0.7.0 | 0.7.1 | python-rsa | DISTRO | https://release-monitoring.org/project/08808 | 4.8 | 4.9 | python-rtslib-fb | DISTRO | https://release-monitoring.org/project/19641 | 2.1.74 | 2.2 | python-scipy | DISTRO | https://release-monitoring.org/project/04768 | 1.8.1 | 1.9.3 | python-secretstorage | DISTRO | https://release-monitoring.org/project/04020 | 3.1.2 | 3.3.3 | python-semantic-version | DISTRO | https://release-monitoring.org/project/06514 | 2.8.5 | 2.10.0 | python-sentry-sdk | DISTRO | https://release-monitoring.org/project/21603 | 1.4.3 | 1.10.1 | python-setproctitle | DISTRO | https://release-monitoring.org/project/11699 | 1.2.2 | 1.3.2 | python-setuptools | DISTRO | https://release-monitoring.org/project/04021 | 65.3.0 | 65.5.0 | python-setuptools-scm-git-a... | DISTRO | https://release-monitoring.org/project/28329 | 1.1 | 1.4 | python-sh | DISTRO | https://release-monitoring.org/project/10429 | 1.14.2 | 1.14.3 | python-simplesqlite | DISTRO | https://release-monitoring.org/project/21608 | 0.45.2 | 1.3.0 | python-sip | DISTRO | https://release-monitoring.org/project/13626 | 4.19.25 | 5.0.0 | python-socketio | DISTRO | https://release-monitoring.org/project/21611 | 5.4.0 | 5.7.2 | python-soupsieve | DISTRO | https://release-monitoring.org/project/27570 | 2.2.1 | 2.3.2.post1 | python-sqlalchemy | DISTRO | https://release-monitoring.org/project/04034 | 1.3.10 | 2.0.0b2 | python-sqliteschema | DISTRO | https://release-monitoring.org/project/29718 | 1.2.1 | 1.3.0 | python-sqlparse | DISTRO | https://release-monitoring.org/project/04038 | 0.3.0 | 0.4.3 | python-systemd | DISTRO | https://release-monitoring.org/project/07314 | 234 | 235 | python-tempora | DISTRO | https://release-monitoring.org/project/21225 | 1.14.1 | 5.0.2 | python-termcolor | DISTRO | https://release-monitoring.org/project/10198 | 1.1.0 | 2.1.0 | python-thrift | DISTRO | https://release-monitoring.org/project/21614 | 0.13.0 | 0.16.0 | python-tornado | DISTRO | https://release-monitoring.org/project/07498 | 6.0.4 | 6.2 | python-tqdm | DISTRO | https://release-monitoring.org/project/11524 | 4.40.1 | 4.64.1 | python-traitlets | DISTRO | https://release-monitoring.org/project/12211 | 5.1.0 | 5.5.0 | python-twisted | DISTRO | https://release-monitoring.org/project/04071 | 22.2.0 | 22.8.0 | python-txtorcon | DISTRO | https://release-monitoring.org/project/19661 | 21.1.0 | 22.0.0 | python-unittest-xml-reporting | DISTRO | https://release-monitoring.org/project/72281 | 3.0.4 | 3.2.0 | python-validators | DISTRO | https://release-monitoring.org/project/19818 | 0.15.0 | 0.20.0 | python-watchdog | DISTRO | https://release-monitoring.org/project/05341 | 2.1.6 | 2.1.9 | python-wcwidth | DISTRO | https://release-monitoring.org/project/08743 | 0.1.9 | 0.2.5 | python-webpy | DISTRO | https://release-monitoring.org/project/04090 | 0.40 | 0.62 | python-websocket-client | DISTRO | https://release-monitoring.org/project/07288 | 0.58.0 | 1.4.1 | python-websockets | DISTRO | https://release-monitoring.org/project/08100 | 10.0 | 10.4 | python-werkzeug | DISTRO | https://release-monitoring.org/project/04092 | 2.1.2 | 2.2.2 | python-wrapt | DISTRO | https://release-monitoring.org/project/06108 | 1.12.1 | 1.14.1 | python-wtforms | DISTRO | https://release-monitoring.org/project/11805 | 2.3.3 | 3.0.1 | python-xlib | DISTRO | https://release-monitoring.org/project/12180 | 0.27 | 0.31 | python-xlsxwriter | DISTRO | https://release-monitoring.org/project/12031 | 3.0.1 | 3.0.3 | python-yatl | DISTRO | https://release-monitoring.org/project/50636 | 20211217.1 | 20220907.1 | python-zeroconf | DISTRO | https://release-monitoring.org/project/12681 | 0.29.0 | 0.39.3 | python-zlmdb | DISTRO | https://release-monitoring.org/project/66674 | 22.3.1 | 22.6.1 | python-zope-interface | DISTRO | https://release-monitoring.org/project/04112 | 5.4.0 | 5.5.0 | python3 | DISTRO | https://release-monitoring.org/project/13254 | 3.10.8 | 3.11.0 | qcom-db410c-firmware | DISTRO | https://release-monitoring.org/project/235382 | 1034.2.1 | 1036.1 | qpdf | DISTRO | https://release-monitoring.org/project/05542 | 10.5.0 | 11.1.1 | qpid-proton | DISTRO | https://release-monitoring.org/project/15198 | 0.35.0 | 0.37.0 | qt5coap | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5knx | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5mqtt | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5opcua | DISTRO | https://release-monitoring.org/project/07927 | 5.15.2 | 6.4.0 | qt5webengine | DISTRO | https://release-monitoring.org/project/07927 | 5.15.8 | 6.4.0 | quazip | DISTRO | https://release-monitoring.org/project/04141 | 1.2 | 1.3 | quota | DISTRO | https://release-monitoring.org/project/04145 | 4.06 | 4.09 | qwt | DISTRO | https://release-monitoring.org/project/04147 | 6.1.6 | 6.2.0 | ORPH rabbitmq-server | DISTRO | https://release-monitoring.org/project/05585 | 3.8.2 | 3.11.2 | ragel | DISTRO | https://release-monitoring.org/project/12105 | 6.10 | 7.0.4 | ORPH ranger | DISTRO | https://release-monitoring.org/project/07426 | 1.7.2 | 1.9.3 | readline | DISTRO | https://release-monitoring.org/project/04173 | 8.1.2 | 8.2 | ORPH refpolicy | DISTRO | https://release-monitoring.org/project/21663 | 2.20220106 | 2.20220520 | restorecond | DISTRO | https://release-monitoring.org/project/16520 | 3.3 | 20200710 | ORPH riemann-c-client | DISTRO | https://release-monitoring.org/project/21389 | 1.10.5 | 2.0.1 | ORPH rocksdb | DISTRO | https://release-monitoring.org/project/15560 | 6.20.3 | 7.7.3 | rsyslog | DISTRO | https://release-monitoring.org/project/04218 | 8.2204.1 | 8.2210.0 | rtty | DISTRO | https://release-monitoring.org/project/87994 | 7.4.0 | 8.1.0 | rygel | DISTRO | https://release-monitoring.org/project/04751 | 0.40.2 | 0.42.0 | s6-linux-init | DISTRO | https://release-monitoring.org/project/16552 | 1.0.6.3 | 1.0.8.0 | safeclib | DISTRO | https://release-monitoring.org/project/21385 | 3.7.1 | 01022022 | samba4 | DISTRO | https://release-monitoring.org/project/04758 | 4.15.11 | 4.17.2 | scons | DISTRO | https://release-monitoring.org/project/04770 | 3.1.2 | 4.4.0 | sdl2_mixer | DISTRO | https://release-monitoring.org/project/04782 | 2.0.4 | 2.6.2 | ORPH sdl2_net | DISTRO | https://release-monitoring.org/project/04783 | 2.0.1 | 2.2.0 | ORPH sdl2_ttf | DISTRO | https://release-monitoring.org/project/04784 | 2.0.18 | 2.20.1 | sdl_gfx | DISTRO | https://release-monitoring.org/project/04778 | 2.0.23 | 2.0.25 | ORPH sdl_sound | DISTRO | https://release-monitoring.org/project/10262 | 1.0.3 | 2.0.1 | ORPH sdparm | DISTRO | https://release-monitoring.org/project/04787 | 1.10 | 1.12 | selinux-python | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | semodule-utils | DISTRO | https://release-monitoring.org/project/01717 | 3.3 | 3.4 | ORPH sentry-native | DISTRO | https://release-monitoring.org/project/135639 | 0.4.1 | 0.5.2 | serd | DISTRO | https://release-monitoring.org/project/230531 | 0.30.14 | 0.30.16 | shairport-sync | DISTRO | https://release-monitoring.org/project/21384 | 3.3.9 | 4.1 | ORPH shared-mime-info | DISTRO | https://release-monitoring.org/project/05524 | 1.12 | 2.2 | ORPH shim | DISTRO | https://release-monitoring.org/project/10719 | 15.4 | 15.6 | snmppp | DISTRO | https://release-monitoring.org/project/21318 | 3.4.10 | 3.5.0 | snort3 | DISTRO | https://release-monitoring.org/project/13263 | 3.1.40.0 | 3.1.45.0 | socat | DISTRO | https://release-monitoring.org/project/04848 | 1.7.4.3 | 1.7.4.4 | softether | DISTRO | https://release-monitoring.org/project/21383 | 4.30-9700... | 4.38-9760... | sord | DISTRO | https://release-monitoring.org/project/230536 | 0.16.12 | 0.16.14 | sound-theme-freedesktop | DISTRO | https://release-monitoring.org/project/10152 | 0.7 | 0.8 | spandsp | DISTRO | https://release-monitoring.org/project/12600 | 3.0.0-6ec... | 3.0.0 | sphinxbase | DISTRO | https://release-monitoring.org/project/20548 | 5prealpha | 0.8 | spice | DISTRO | https://release-monitoring.org/project/04871 | 0.15.0 | 0.15.1 | sqlcipher | DISTRO | https://release-monitoring.org/project/11213 | 4.5.1 | 4.5.2 | ssdp-responder | DISTRO | https://release-monitoring.org/project/17371 | 1.8 | 1.9 | start-stop-daemon | DISTRO | https://release-monitoring.org/project/08127 | 1.20.7.1 | 1.21.9 | ORPH stellarium | DISTRO | https://release-monitoring.org/project/04891 | 0.22.2 | 1.0 | strace | DISTRO | https://release-monitoring.org/project/04897 | 5.19 | 6.0 | stress | DISTRO | https://release-monitoring.org/project/08048 | 1.0.4 | 1.0.5 | stress-ng | DISTRO | https://release-monitoring.org/project/12538 | 0.13.05 | 0.14.06 | strongswan | DISTRO | https://release-monitoring.org/project/04899 | 5.9.5 | 5.9.8 | stunnel | DISTRO | https://release-monitoring.org/project/04901 | 5.65 | 5.66 | sudo | DISTRO | https://release-monitoring.org/project/04906 | 1.9.11p2 | 1.9.12 | ORPH supervisor | DISTRO | https://release-monitoring.org/project/16289 | 4.2.2 | 4.2.4 | ORPH suricata | DISTRO | https://release-monitoring.org/project/10925 | 6.0.6 | 6.0.8 | swig | DISTRO | https://release-monitoring.org/project/04919 | 4.0.2 | 4.1.0 | synergy | DISTRO | https://release-monitoring.org/project/05718 | 2.0.12-beta | 2.3.2 | sysdig | DISTRO | https://release-monitoring.org/project/16898 | 0.29.3 | 0.30.0 | sysprof | DISTRO | https://release-monitoring.org/project/21649 | 1.2.0 | 3.46.0 | sysrepo | DISTRO | https://release-monitoring.org/project/34820 | 2.1.64 | 2.1.84 | sysstat | DISTRO | https://release-monitoring.org/project/04931 | 12.4.2 | 12.6.0 | ORPH system-config-printer | DISTRO | https://release-monitoring.org/project/08855 | 1.5.15 | 1.5.18 | ORPH systemd | DISTRO | https://release-monitoring.org/project/05440 | 250.4 | 251 | systemd-bootchart | DISTRO | https://release-monitoring.org/project/11774 | 233 | 234 | sysvinit | DISTRO | https://release-monitoring.org/project/21648 | 2.99 | 3.04 | ORPH tbb | DISTRO | https://release-monitoring.org/project/08217 | 2021.5.0 | 2021.7.0 | tclap | DISTRO | https://release-monitoring.org/project/04942 | 1.2.4 | 1.2.5 | tcllib | DISTRO | https://release-monitoring.org/project/04943 | 1.20 | 1.21 | tesseract-ocr | DISTRO | https://release-monitoring.org/project/04954 | 5.0.1 | 5.2.0 | thermald | DISTRO | https://release-monitoring.org/project/14500 | 2.5 | 2.5.1 | thrift | DISTRO | https://release-monitoring.org/project/05581 | 0.14.1 | 0.17.0 | ORPH timescaledb | DISTRO | https://release-monitoring.org/project/17545 | 2.8.0 | 2.8.1 | tinifier | DISTRO | https://release-monitoring.org/project/241900 | 3.4.0 | 3.5.0 | tinyxml | DISTRO | https://release-monitoring.org/project/10162 | 2.6.2_2 | 2.6.2 | ORPH tio | DISTRO | https://release-monitoring.org/project/20587 | 1.47 | 2.2 | tmux | DISTRO | https://release-monitoring.org/project/04980 | 3.1c | 3.3a | tpm-tools | DISTRO | https://release-monitoring.org/project/21640 | 1.3.9.1 | 1.3.9.2 | tpm2-abrmd | DISTRO | https://release-monitoring.org/project/16819 | 2.3.3 | 2.4.1 | ORPH tpm2-pkcs11 | DISTRO | https://release-monitoring.org/project/18777 | 1.7.0 | 1.8.0 | tpm2-tools | DISTRO | https://release-monitoring.org/project/12841 | 5.2 | 5.3 | ORPH tpm2-totp | DISTRO | https://release-monitoring.org/project/18790 | 0.2.1 | 0.3.0 | tpm2-tss | DISTRO | https://release-monitoring.org/project/12683 | 3.1.0 | 3.2.0 | ORPH trace-cmd | DISTRO | https://release-monitoring.org/project/07873 | 2.9.7 | 3.1.4 | tree | DISTRO | https://release-monitoring.org/project/05006 | 2.0.2 | 2.0.4 | uboot-tools | DISTRO | https://release-monitoring.org/project/05022 | 2021.07 | 2022.10 | uftrace | DISTRO | https://release-monitoring.org/project/195039 | 0.10 | 0.12 | unionfs | DISTRO | https://release-monitoring.org/project/17617 | 2.1 | 3.2 | unrar | DISTRO | https://release-monitoring.org/project/13306 | 6.1.7 | 6.2.1 | ORPH upmpdcli | DISTRO | https://release-monitoring.org/project/15848 | 1.5.12 | 1.6.1 | ORPH upower | DISTRO | https://release-monitoring.org/project/05056 | 0.99.19 | 0.99.20 | upx | DISTRO | https://release-monitoring.org/project/13737 | 3.96 | 4.0.0 | usbredir | DISTRO | https://release-monitoring.org/project/16012 | 0.12.0 | 0.13.0 | util-linux | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH util-linux-libs | DISTRO | https://release-monitoring.org/project/08179 | 2.38 | 2.38.1 | ORPH uvw | DISTRO | https://release-monitoring.org/project/33083 | 2.11.0_li... | 2.12.1_li... | vala | DISTRO | https://release-monitoring.org/project/05065 | 0.52.4 | 0.56.3 | ORPH valgrind | DISTRO | https://release-monitoring.org/project/13639 | 3.19.0 | 3.20.0 | ORPH valijson | DISTRO | https://release-monitoring.org/project/18452 | 0.6 | 0.7 | vis-network | DISTRO | https://release-monitoring.org/project/270536 | 9.1.0 | 9.1.2 | vpnc | DISTRO | https://release-monitoring.org/project/15955 | 0.5.3r550... | 0.5.3 | ORPH vte | DISTRO | https://release-monitoring.org/project/10895 | 0.66.2 | 0.70.1 | ORPH vuejs | DISTRO | https://release-monitoring.org/project/89353 | 3.2.33 | 3.2.41 | vuejs-router | DISTRO | https://release-monitoring.org/project/234796 | 4.0.15 | 4.1.6 | vulkan-headers | DISTRO | https://release-monitoring.org/project/88835 | 1.2.203 | 1.3.232 | ORPH wayland-protocols | DISTRO | https://release-monitoring.org/project/13997 | 1.26 | 1.27 | ORPH waylandpp | DISTRO | https://release-monitoring.org/project/16969 | 0.2.8 | 1.0.0 | webkitgtk | DISTRO | https://release-monitoring.org/project/05355 | 2.38.0 | 2.38.1 | webrtc-audio-processing | DISTRO | https://release-monitoring.org/project/15929 | 0.3.1 | 1.0 | ORPH weston | DISTRO | https://release-monitoring.org/project/13745 | 10.0.1 | 11.0.0 | wine | DISTRO | https://release-monitoring.org/project/05134 | 7.0 | 7.19 | wireless-regdb | DISTRO | https://release-monitoring.org/project/15257 | 2022.02.18 | 2022.08.12 | wireplumber | DISTRO | https://release-monitoring.org/project/235056 | 0.4.8 | 0.4.12 | ORPH wireshark | DISTRO | https://release-monitoring.org/project/05137 | 3.4.12 | 4.0.1 | ORPH wpebackend-fdo | DISTRO | https://release-monitoring.org/project/17547 | 1.12.1 | 1.14.0 | wpewebkit | DISTRO | https://release-monitoring.org/project/17557 | 2.36.8 | 2.38.1 | wtfutil | DISTRO | https://release-monitoring.org/project/243189 | 0.41.0 | 0.42.0 | xapian | DISTRO | https://release-monitoring.org/project/15919 | 1.4.19 | 1.4.21 | xapp_fslsfonts | DISTRO | https://release-monitoring.org/project/17157 | 1.0.5 | 1.0.6 | xapp_fstobdf | DISTRO | https://release-monitoring.org/project/17156 | 1.0.6 | 1.0.7 | xapp_ico | DISTRO | https://release-monitoring.org/project/21722 | 1.0.5 | 1.0.6 | xapp_luit | DISTRO | https://release-monitoring.org/project/15047 | 1.1.1 | 20221028 | xapp_oclock | DISTRO | https://release-monitoring.org/project/15042 | 1.0.4 | 1.0.5 | xapp_rgb | DISTRO | https://release-monitoring.org/project/17151 | 1.0.6 | 1.1.0 | xapp_sessreg | DISTRO | https://release-monitoring.org/project/15040 | 1.1.2 | 1.1.3 | xapp_showfont | DISTRO | https://release-monitoring.org/project/12316 | 1.0.5 | 1.0.6 | xapp_smproxy | DISTRO | https://release-monitoring.org/project/15039 | 1.0.6 | 1.0.7 | xapp_viewres | DISTRO | https://release-monitoring.org/project/17162 | 1.0.6 | 1.0.7 | xapp_xditview | DISTRO | https://release-monitoring.org/project/21262 | 1.0.5 | 1.0.6 | xapp_xfsinfo | DISTRO | https://release-monitoring.org/project/17158 | 1.0.6 | 1.0.7 | xapp_xgc | DISTRO | https://release-monitoring.org/project/21720 | 1.0.5 | 1.0.6 | xapp_xkbprint | DISTRO | https://release-monitoring.org/project/17159 | 1.0.5 | 1.0.6 | xapp_xmh | DISTRO | https://release-monitoring.org/project/21718 | 1.0.3 | 1.0.4 | xapp_xsetroot | DISTRO | https://release-monitoring.org/project/14953 | 1.1.2 | 1.1.3 | xcb-util-cursor | DISTRO | https://release-monitoring.org/project/05166 | 0.1.3 | 0.1.4 | xcb-util-image | DISTRO | https://release-monitoring.org/project/05167 | 0.4.0 | 0.4.1 | xcb-util-keysyms | DISTRO | https://release-monitoring.org/project/05168 | 0.4.0 | 0.4.1 | xcb-util-renderutil | DISTRO | https://release-monitoring.org/project/05169 | 0.3.9 | 0.3.10 | xcb-util-wm | DISTRO | https://release-monitoring.org/project/05170 | 0.4.1 | 0.4.2 | xdriver_xf86-input-keyboard | DISTRO | https://release-monitoring.org/project/15902 | 1.9.0 | 2.0.0 | xdriver_xf86-input-libinput | DISTRO | https://release-monitoring.org/project/05782 | 1.2.0 | 1.2.1 | xdriver_xf86-input-vmmouse | DISTRO | https://release-monitoring.org/project/05244 | 13.1.0 | 13.2.0 | xen | DISTRO | https://release-monitoring.org/project/05181 | 4.14.4 | 4.16.2 | xerces | DISTRO | https://release-monitoring.org/project/05182 | 3.2.3 | 3.2.4 | ORPH xfsprogs | DISTRO | https://release-monitoring.org/project/05188 | 5.14.2 | 5.19.0 | ORPH xinetd | DISTRO | https://release-monitoring.org/project/06382 | 2.3.15 | 2.3.15.4 | xkeyboard-config | DISTRO | https://release-monitoring.org/project/05191 | 2.36 | 2.37 | xlib_libFS | DISTRO | https://release-monitoring.org/project/01618 | 1.0.8 | 1.0.9 | xlib_libXau | DISTRO | https://release-monitoring.org/project/01765 | 1.0.9 | 1.0.10 | xlib_libXext | DISTRO | https://release-monitoring.org/project/01774 | 1.3.4 | 1.3.5 | xlib_libXfont2 | DISTRO | https://release-monitoring.org/project/17165 | 2.0.5 | 2.0.6 | xlib_libXft | DISTRO | https://release-monitoring.org/project/01777 | 2.3.4 | 2.3.6 | xlib_libXinerama | DISTRO | https://release-monitoring.org/project/01779 | 1.1.4 | 1.1.5 | xlib_libXmu | DISTRO | https://release-monitoring.org/project/01785 | 1.1.3 | 1.1.4 | xlib_libXrender | DISTRO | https://release-monitoring.org/project/01789 | 0.9.10 | 0.9.11 | xlib_libXtst | DISTRO | https://release-monitoring.org/project/01794 | 1.2.3 | 1.2.4 | xlib_libXxf86vm | DISTRO | https://release-monitoring.org/project/01799 | 1.1.4 | 1.1.5 | xlib_libfontenc | DISTRO | https://release-monitoring.org/project/01613 | 1.1.4 | 1.1.6 | xlib_libxkbfile | DISTRO | https://release-monitoring.org/project/01781 | 1.1.0 | 1.1.1 | xlib_libxshmfence | DISTRO | https://release-monitoring.org/project/01792 | 1.3 | 1.3.1 | xmrig | DISTRO | https://release-monitoring.org/project/17499 | 6.18.0 | 6.18.1 | xorgproto | DISTRO | https://release-monitoring.org/project/17190 | 2022.1 | 2022.2 | xscreensaver | DISTRO | https://release-monitoring.org/project/05269 | 6.03 | 6.05.1 | xtables-addons | DISTRO | https://release-monitoring.org/project/07736 | 3.21 | 3.22 | ORPH xterm | DISTRO | https://release-monitoring.org/project/05272 | 371 | 375 | ORPH xutil_makedepend | DISTRO | https://release-monitoring.org/project/13528 | 1.0.6 | 1.0.7 | yad | DISTRO | https://release-monitoring.org/project/05280 | 0.40.0 | 12.0 | zabbix | DISTRO | https://release-monitoring.org/project/05492 | 5.4.9 | 6.2.3 | zchunk | DISTRO | https://release-monitoring.org/project/178035 | 1.2.2 | 1.2.3 | zeek | DISTRO | https://release-monitoring.org/project/267106 | 4.1.1 | 5.0.2 | Packages having CVEs ==================== CVEs for the 'master' branch ---------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 assimp | CVE-2022-38528 | https://security-tracker.debian.org/tracker/CVE-2022-38528 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dracut | CVE-2010-4176 | https://security-tracker.debian.org/tracker/CVE-2010-4176 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2022-33067 | https://security-tracker.debian.org/tracker/CVE-2022-33067 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 openvmtools | CVE-2014-4199 | https://security-tracker.debian.org/tracker/CVE-2014-4199 openvmtools | CVE-2014-4200 | https://security-tracker.debian.org/tracker/CVE-2014-4200 openvmtools | CVE-2022-22943 | https://security-tracker.debian.org/tracker/CVE-2022-22943 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 polkit | CVE-2021-4034 | https://security-tracker.debian.org/tracker/CVE-2021-4034 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.02.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 dropbear | CVE-2021-36369 | https://security-tracker.debian.org/tracker/CVE-2021-36369 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exim | CVE-2022-37451 | https://security-tracker.debian.org/tracker/CVE-2022-37451 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 expat | CVE-2022-43680 | https://security-tracker.debian.org/tracker/CVE-2022-43680 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 glibc | CVE-2021-3998 | https://security-tracker.debian.org/tracker/CVE-2021-3998 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-27664 | https://security-tracker.debian.org/tracker/CVE-2022-27664 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 haproxy | CVE-2022-0711 | https://security-tracker.debian.org/tracker/CVE-2022-0711 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libbpf | CVE-2021-45940 | https://security-tracker.debian.org/tracker/CVE-2021-45940 libbpf | CVE-2021-45941 | https://security-tracker.debian.org/tracker/CVE-2021-45941 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libfribidi | CVE-2022-25308 | https://security-tracker.debian.org/tracker/CVE-2022-25308 libfribidi | CVE-2022-25309 | https://security-tracker.debian.org/tracker/CVE-2022-25309 libfribidi | CVE-2022-25310 | https://security-tracker.debian.org/tracker/CVE-2022-25310 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtasn1 | CVE-2021-46848 | https://security-tracker.debian.org/tracker/CVE-2021-46848 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 mender | CVE-2022-29555 | https://security-tracker.debian.org/tracker/CVE-2022-29555 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38171 | https://security-tracker.debian.org/tracker/CVE-2022-38171 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-pyjwt | CVE-2022-29217 | https://security-tracker.debian.org/tracker/CVE-2022-29217 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 python-web2py | CVE-2022-33146 | https://security-tracker.debian.org/tracker/CVE-2022-33146 python-werkzeug | CVE-2022-29361 | https://security-tracker.debian.org/tracker/CVE-2022-29361 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2021-3611 | https://security-tracker.debian.org/tracker/CVE-2021-3611 qemu | CVE-2021-3750 | https://security-tracker.debian.org/tracker/CVE-2021-3750 qemu | CVE-2021-3929 | https://security-tracker.debian.org/tracker/CVE-2021-3929 qemu | CVE-2021-3947 | https://security-tracker.debian.org/tracker/CVE-2021-3947 qemu | CVE-2021-4158 | https://security-tracker.debian.org/tracker/CVE-2021-4158 qemu | CVE-2021-4206 | https://security-tracker.debian.org/tracker/CVE-2021-4206 qemu | CVE-2021-4207 | https://security-tracker.debian.org/tracker/CVE-2021-4207 qemu | CVE-2022-0358 | https://security-tracker.debian.org/tracker/CVE-2022-0358 qemu | CVE-2022-1050 | https://security-tracker.debian.org/tracker/CVE-2022-1050 qemu | CVE-2022-26353 | https://security-tracker.debian.org/tracker/CVE-2022-26353 qemu | CVE-2022-26354 | https://security-tracker.debian.org/tracker/CVE-2022-26354 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unbound | CVE-2022-30698 | https://security-tracker.debian.org/tracker/CVE-2022-30698 unbound | CVE-2022-30699 | https://security-tracker.debian.org/tracker/CVE-2022-30699 unbound | CVE-2022-3204 | https://security-tracker.debian.org/tracker/CVE-2022-3204 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 usbguard | CVE-2019-25058 | https://security-tracker.debian.org/tracker/CVE-2019-25058 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wavpack | CVE-2022-2476 | https://security-tracker.debian.org/tracker/CVE-2022-2476 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 xlib_libX11 | CVE-2022-3555 | https://security-tracker.debian.org/tracker/CVE-2022-3555 xscreensaver | CVE-2021-34557 | https://security-tracker.debian.org/tracker/CVE-2021-34557 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 CVEs for the '2022.08.x' branch ------------------------------- name | CVE | link -------------------------------+------------------+-------------------------------------------------------------- apache | CVE-1999-0236 | https://security-tracker.debian.org/tracker/CVE-1999-0236 apache | CVE-1999-0289 | https://security-tracker.debian.org/tracker/CVE-1999-0289 apache | CVE-1999-0678 | https://security-tracker.debian.org/tracker/CVE-1999-0678 apache | CVE-1999-1237 | https://security-tracker.debian.org/tracker/CVE-1999-1237 apache | CVE-1999-1412 | https://security-tracker.debian.org/tracker/CVE-1999-1412 apache | CVE-2007-0086 | https://security-tracker.debian.org/tracker/CVE-2007-0086 apache | CVE-2007-0450 | https://security-tracker.debian.org/tracker/CVE-2007-0450 apache | CVE-2007-4465 | https://security-tracker.debian.org/tracker/CVE-2007-4465 apache | CVE-2007-5000 | https://security-tracker.debian.org/tracker/CVE-2007-5000 apache | CVE-2007-6388 | https://security-tracker.debian.org/tracker/CVE-2007-6388 apache | CVE-2007-6420 | https://security-tracker.debian.org/tracker/CVE-2007-6420 apache | CVE-2007-6421 | https://security-tracker.debian.org/tracker/CVE-2007-6421 apache | CVE-2007-6422 | https://security-tracker.debian.org/tracker/CVE-2007-6422 apache | CVE-2007-6423 | https://security-tracker.debian.org/tracker/CVE-2007-6423 apache | CVE-2008-2168 | https://security-tracker.debian.org/tracker/CVE-2008-2168 apache | CVE-2008-2939 | https://security-tracker.debian.org/tracker/CVE-2008-2939 apache | CVE-2009-1195 | https://security-tracker.debian.org/tracker/CVE-2009-1195 apache | CVE-2010-0408 | https://security-tracker.debian.org/tracker/CVE-2010-0408 apache | CVE-2010-0425 | https://security-tracker.debian.org/tracker/CVE-2010-0425 apache | CVE-2010-1452 | https://security-tracker.debian.org/tracker/CVE-2010-1452 apache | CVE-2014-0231 | https://security-tracker.debian.org/tracker/CVE-2014-0231 apparmor | CVE-2016-1585 | https://security-tracker.debian.org/tracker/CVE-2016-1585 argus | CVE-2011-3332 | https://security-tracker.debian.org/tracker/CVE-2011-3332 asn1c | CVE-2017-12966 | https://security-tracker.debian.org/tracker/CVE-2017-12966 atop | CVE-2011-3618 | https://security-tracker.debian.org/tracker/CVE-2011-3618 avahi | CVE-2021-3468 | https://security-tracker.debian.org/tracker/CVE-2021-3468 belle-sip | CVE-2021-33056 | https://security-tracker.debian.org/tracker/CVE-2021-33056 belle-sip | CVE-2021-43610 | https://security-tracker.debian.org/tracker/CVE-2021-43610 belle-sip | CVE-2021-43611 | https://security-tracker.debian.org/tracker/CVE-2021-43611 bento4 | CVE-2020-23331 | https://security-tracker.debian.org/tracker/CVE-2020-23331 bento4 | CVE-2020-23332 | https://security-tracker.debian.org/tracker/CVE-2020-23332 bento4 | CVE-2022-27607 | https://security-tracker.debian.org/tracker/CVE-2022-27607 bento4 | CVE-2022-35165 | https://security-tracker.debian.org/tracker/CVE-2022-35165 bento4 | CVE-2022-3662 | https://security-tracker.debian.org/tracker/CVE-2022-3662 bento4 | CVE-2022-3663 | https://security-tracker.debian.org/tracker/CVE-2022-3663 bento4 | CVE-2022-3664 | https://security-tracker.debian.org/tracker/CVE-2022-3664 bento4 | CVE-2022-3665 | https://security-tracker.debian.org/tracker/CVE-2022-3665 bento4 | CVE-2022-3666 | https://security-tracker.debian.org/tracker/CVE-2022-3666 bento4 | CVE-2022-3667 | https://security-tracker.debian.org/tracker/CVE-2022-3667 bento4 | CVE-2022-3668 | https://security-tracker.debian.org/tracker/CVE-2022-3668 bento4 | CVE-2022-3669 | https://security-tracker.debian.org/tracker/CVE-2022-3669 bento4 | CVE-2022-3670 | https://security-tracker.debian.org/tracker/CVE-2022-3670 bento4 | CVE-2022-40438 | https://security-tracker.debian.org/tracker/CVE-2022-40438 bento4 | CVE-2022-40439 | https://security-tracker.debian.org/tracker/CVE-2022-40439 bento4 | CVE-2022-40736 | https://security-tracker.debian.org/tracker/CVE-2022-40736 bento4 | CVE-2022-40737 | https://security-tracker.debian.org/tracker/CVE-2022-40737 bento4 | CVE-2022-40738 | https://security-tracker.debian.org/tracker/CVE-2022-40738 bento4 | CVE-2022-40774 | https://security-tracker.debian.org/tracker/CVE-2022-40774 bento4 | CVE-2022-40775 | https://security-tracker.debian.org/tracker/CVE-2022-40775 bento4 | CVE-2022-40885 | https://security-tracker.debian.org/tracker/CVE-2022-40885 bento4 | CVE-2022-41419 | https://security-tracker.debian.org/tracker/CVE-2022-41419 bento4 | CVE-2022-41423 | https://security-tracker.debian.org/tracker/CVE-2022-41423 bento4 | CVE-2022-41424 | https://security-tracker.debian.org/tracker/CVE-2022-41424 bento4 | CVE-2022-41425 | https://security-tracker.debian.org/tracker/CVE-2022-41425 bento4 | CVE-2022-41426 | https://security-tracker.debian.org/tracker/CVE-2022-41426 bento4 | CVE-2022-41427 | https://security-tracker.debian.org/tracker/CVE-2022-41427 bento4 | CVE-2022-41428 | https://security-tracker.debian.org/tracker/CVE-2022-41428 bento4 | CVE-2022-41429 | https://security-tracker.debian.org/tracker/CVE-2022-41429 bento4 | CVE-2022-41430 | https://security-tracker.debian.org/tracker/CVE-2022-41430 bento4 | CVE-2022-41841 | https://security-tracker.debian.org/tracker/CVE-2022-41841 bento4 | CVE-2022-41845 | https://security-tracker.debian.org/tracker/CVE-2022-41845 bento4 | CVE-2022-41846 | https://security-tracker.debian.org/tracker/CVE-2022-41846 bento4 | CVE-2022-41847 | https://security-tracker.debian.org/tracker/CVE-2022-41847 bento4 | CVE-2022-43032 | https://security-tracker.debian.org/tracker/CVE-2022-43032 bento4 | CVE-2022-43033 | https://security-tracker.debian.org/tracker/CVE-2022-43033 bento4 | CVE-2022-43034 | https://security-tracker.debian.org/tracker/CVE-2022-43034 bento4 | CVE-2022-43035 | https://security-tracker.debian.org/tracker/CVE-2022-43035 bento4 | CVE-2022-43037 | https://security-tracker.debian.org/tracker/CVE-2022-43037 bento4 | CVE-2022-43038 | https://security-tracker.debian.org/tracker/CVE-2022-43038 berkeleydb | CVE-2017-3604 | https://security-tracker.debian.org/tracker/CVE-2017-3604 berkeleydb | CVE-2017-3605 | https://security-tracker.debian.org/tracker/CVE-2017-3605 berkeleydb | CVE-2017-3606 | https://security-tracker.debian.org/tracker/CVE-2017-3606 berkeleydb | CVE-2017-3607 | https://security-tracker.debian.org/tracker/CVE-2017-3607 berkeleydb | CVE-2017-3608 | https://security-tracker.debian.org/tracker/CVE-2017-3608 berkeleydb | CVE-2017-3609 | https://security-tracker.debian.org/tracker/CVE-2017-3609 berkeleydb | CVE-2017-3610 | https://security-tracker.debian.org/tracker/CVE-2017-3610 berkeleydb | CVE-2017-3611 | https://security-tracker.debian.org/tracker/CVE-2017-3611 berkeleydb | CVE-2017-3612 | https://security-tracker.debian.org/tracker/CVE-2017-3612 berkeleydb | CVE-2017-3613 | https://security-tracker.debian.org/tracker/CVE-2017-3613 berkeleydb | CVE-2017-3614 | https://security-tracker.debian.org/tracker/CVE-2017-3614 berkeleydb | CVE-2017-3615 | https://security-tracker.debian.org/tracker/CVE-2017-3615 berkeleydb | CVE-2017-3616 | https://security-tracker.debian.org/tracker/CVE-2017-3616 berkeleydb | CVE-2017-3617 | https://security-tracker.debian.org/tracker/CVE-2017-3617 berkeleydb | CVE-2019-2708 | https://security-tracker.debian.org/tracker/CVE-2019-2708 berkeleydb | CVE-2020-2981 | https://security-tracker.debian.org/tracker/CVE-2020-2981 binutils | CVE-2021-45078 | https://security-tracker.debian.org/tracker/CVE-2021-45078 binutils | CVE-2022-38126 | https://security-tracker.debian.org/tracker/CVE-2022-38126 binutils | CVE-2022-38127 | https://security-tracker.debian.org/tracker/CVE-2022-38127 binutils | CVE-2022-38128 | https://security-tracker.debian.org/tracker/CVE-2022-38128 binutils | CVE-2022-38533 | https://security-tracker.debian.org/tracker/CVE-2022-38533 bitcoin | CVE-2012-1909 | https://security-tracker.debian.org/tracker/CVE-2012-1909 bitcoin | CVE-2012-4682 | https://security-tracker.debian.org/tracker/CVE-2012-4682 bitcoin | CVE-2012-4683 | https://security-tracker.debian.org/tracker/CVE-2012-4683 bitcoin | CVE-2013-2272 | https://security-tracker.debian.org/tracker/CVE-2013-2272 bitcoin | CVE-2013-2273 | https://security-tracker.debian.org/tracker/CVE-2013-2273 bitcoin | CVE-2013-2292 | https://security-tracker.debian.org/tracker/CVE-2013-2292 bitcoin | CVE-2013-2293 | https://security-tracker.debian.org/tracker/CVE-2013-2293 bitcoin | CVE-2013-3220 | https://security-tracker.debian.org/tracker/CVE-2013-3220 bluez5_utils | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bluez5_utils-headers | CVE-2020-24490 | https://security-tracker.debian.org/tracker/CVE-2020-24490 bsdiff | CVE-2020-14315 | https://security-tracker.debian.org/tracker/CVE-2020-14315 cairo | CVE-2019-6461 | https://security-tracker.debian.org/tracker/CVE-2019-6461 cairo | CVE-2019-6462 | https://security-tracker.debian.org/tracker/CVE-2019-6462 cairo | CVE-2020-35492 | https://security-tracker.debian.org/tracker/CVE-2020-35492 connman | CVE-2022-32292 | https://security-tracker.debian.org/tracker/CVE-2022-32292 connman | CVE-2022-32293 | https://security-tracker.debian.org/tracker/CVE-2022-32293 coreutils | CVE-2016-2781 | https://security-tracker.debian.org/tracker/CVE-2016-2781 cpio | CVE-2010-4226 | https://security-tracker.debian.org/tracker/CVE-2010-4226 cryptopp | CVE-2021-43398 | https://security-tracker.debian.org/tracker/CVE-2021-43398 cvs | CVE-2017-12836 | https://security-tracker.debian.org/tracker/CVE-2017-12836 dbus-broker | CVE-2022-31212 | https://security-tracker.debian.org/tracker/CVE-2022-31212 dbus-broker | CVE-2022-31213 | https://security-tracker.debian.org/tracker/CVE-2022-31213 dhcp | CVE-2022-2928 | https://security-tracker.debian.org/tracker/CVE-2022-2928 dhcp | CVE-2022-2929 | https://security-tracker.debian.org/tracker/CVE-2022-2929 dnsmasq | CVE-2022-0934 | https://security-tracker.debian.org/tracker/CVE-2022-0934 docker | CVE-2014-0048 | https://security-tracker.debian.org/tracker/CVE-2014-0048 docker | CVE-2014-8178 | https://security-tracker.debian.org/tracker/CVE-2014-8178 docker | CVE-2014-8179 | https://security-tracker.debian.org/tracker/CVE-2014-8179 docker | CVE-2015-1843 | https://security-tracker.debian.org/tracker/CVE-2015-1843 docker | CVE-2015-3627 | https://security-tracker.debian.org/tracker/CVE-2015-3627 docker | CVE-2015-3630 | https://security-tracker.debian.org/tracker/CVE-2015-3630 docker | CVE-2015-3631 | https://security-tracker.debian.org/tracker/CVE-2015-3631 docker | CVE-2016-3697 | https://security-tracker.debian.org/tracker/CVE-2016-3697 docker | CVE-2017-14992 | https://security-tracker.debian.org/tracker/CVE-2017-14992 docker | CVE-2019-13139 | https://security-tracker.debian.org/tracker/CVE-2019-13139 docker | CVE-2019-13509 | https://security-tracker.debian.org/tracker/CVE-2019-13509 docker | CVE-2019-15752 | https://security-tracker.debian.org/tracker/CVE-2019-15752 docker | CVE-2019-16884 | https://security-tracker.debian.org/tracker/CVE-2019-16884 docker | CVE-2019-5736 | https://security-tracker.debian.org/tracker/CVE-2019-5736 docker | CVE-2020-27534 | https://security-tracker.debian.org/tracker/CVE-2020-27534 docker | CVE-2021-21284 | https://security-tracker.debian.org/tracker/CVE-2021-21284 docker | CVE-2021-21285 | https://security-tracker.debian.org/tracker/CVE-2021-21285 docker | CVE-2021-3162 | https://security-tracker.debian.org/tracker/CVE-2021-3162 docker | CVE-2021-33183 | https://security-tracker.debian.org/tracker/CVE-2021-33183 docker | CVE-2022-25365 | https://security-tracker.debian.org/tracker/CVE-2022-25365 dovecot | CVE-2022-30550 | https://security-tracker.debian.org/tracker/CVE-2022-30550 edk2 | CVE-2014-4859 | https://security-tracker.debian.org/tracker/CVE-2014-4859 edk2 | CVE-2014-4860 | https://security-tracker.debian.org/tracker/CVE-2014-4860 edk2 | CVE-2014-8271 | https://security-tracker.debian.org/tracker/CVE-2014-8271 edk2 | CVE-2019-14553 | https://security-tracker.debian.org/tracker/CVE-2019-14553 edk2 | CVE-2019-14559 | https://security-tracker.debian.org/tracker/CVE-2019-14559 edk2 | CVE-2019-14562 | https://security-tracker.debian.org/tracker/CVE-2019-14562 edk2 | CVE-2019-14563 | https://security-tracker.debian.org/tracker/CVE-2019-14563 edk2 | CVE-2019-14575 | https://security-tracker.debian.org/tracker/CVE-2019-14575 edk2 | CVE-2019-14586 | https://security-tracker.debian.org/tracker/CVE-2019-14586 edk2 | CVE-2019-14587 | https://security-tracker.debian.org/tracker/CVE-2019-14587 emlog | CVE-2021-44584 | https://security-tracker.debian.org/tracker/CVE-2021-44584 emlog | CVE-2022-1526 | https://security-tracker.debian.org/tracker/CVE-2022-1526 erlang | CVE-2020-35733 | https://security-tracker.debian.org/tracker/CVE-2020-35733 erlang | CVE-2022-37026 | https://security-tracker.debian.org/tracker/CVE-2022-37026 exfat | CVE-2022-29973 | https://security-tracker.debian.org/tracker/CVE-2022-29973 exim | CVE-2022-3559 | https://security-tracker.debian.org/tracker/CVE-2022-3559 exiv2 | CVE-2007-6353 | https://security-tracker.debian.org/tracker/CVE-2007-6353 exiv2 | CVE-2022-3717 | https://security-tracker.debian.org/tracker/CVE-2022-3717 exiv2 | CVE-2022-3718 | https://security-tracker.debian.org/tracker/CVE-2022-3718 exiv2 | CVE-2022-3719 | https://security-tracker.debian.org/tracker/CVE-2022-3719 expat | CVE-2022-43680 | https://security-tracker.debian.org/tracker/CVE-2022-43680 ffmpeg | CVE-2021-38291 | https://security-tracker.debian.org/tracker/CVE-2021-38291 freeradius-server | CVE-2002-0318 | https://security-tracker.debian.org/tracker/CVE-2002-0318 freeradius-server | CVE-2011-4966 | https://security-tracker.debian.org/tracker/CVE-2011-4966 giflib | CVE-2022-28506 | https://security-tracker.debian.org/tracker/CVE-2022-28506 git | CVE-2022-24765 | https://security-tracker.debian.org/tracker/CVE-2022-24765 git | CVE-2022-24975 | https://security-tracker.debian.org/tracker/CVE-2022-24975 git | CVE-2022-39253 | https://security-tracker.debian.org/tracker/CVE-2022-39253 git | CVE-2022-39260 | https://security-tracker.debian.org/tracker/CVE-2022-39260 glibc | CVE-2010-4756 | https://security-tracker.debian.org/tracker/CVE-2010-4756 glibc | CVE-2019-1010022 | https://security-tracker.debian.org/tracker/CVE-2019-1010022 glibc | CVE-2019-1010023 | https://security-tracker.debian.org/tracker/CVE-2019-1010023 glibc | CVE-2019-1010024 | https://security-tracker.debian.org/tracker/CVE-2019-1010024 glibc | CVE-2019-1010025 | https://security-tracker.debian.org/tracker/CVE-2019-1010025 gnupg | CVE-2006-3082 | https://security-tracker.debian.org/tracker/CVE-2006-3082 gnupg | CVE-2011-2207 | https://security-tracker.debian.org/tracker/CVE-2011-2207 gnupg | CVE-2015-1606 | https://security-tracker.debian.org/tracker/CVE-2015-1606 gnupg | CVE-2018-12020 | https://security-tracker.debian.org/tracker/CVE-2018-12020 gnupg | CVE-2019-13050 | https://security-tracker.debian.org/tracker/CVE-2019-13050 gnupg | CVE-2019-14855 | https://security-tracker.debian.org/tracker/CVE-2019-14855 gnupg | CVE-2022-34903 | https://security-tracker.debian.org/tracker/CVE-2022-34903 go | CVE-2020-29509 | https://security-tracker.debian.org/tracker/CVE-2020-29509 go | CVE-2020-29511 | https://security-tracker.debian.org/tracker/CVE-2020-29511 go | CVE-2022-2879 | https://security-tracker.debian.org/tracker/CVE-2022-2879 go | CVE-2022-2880 | https://security-tracker.debian.org/tracker/CVE-2022-2880 go | CVE-2022-41715 | https://security-tracker.debian.org/tracker/CVE-2022-41715 graphicsmagick | CVE-2007-0770 | https://security-tracker.debian.org/tracker/CVE-2007-0770 graphicsmagick | CVE-2008-6621 | https://security-tracker.debian.org/tracker/CVE-2008-6621 graphite2 | CVE-2017-5436 | https://security-tracker.debian.org/tracker/CVE-2017-5436 grub2 | CVE-2021-3981 | https://security-tracker.debian.org/tracker/CVE-2021-3981 grub2 | CVE-2021-46705 | https://security-tracker.debian.org/tracker/CVE-2021-46705 haproxy | CVE-2016-2102 | https://security-tracker.debian.org/tracker/CVE-2016-2102 heirloom-mailx | CVE-2004-2771 | https://security-tracker.debian.org/tracker/CVE-2004-2771 imagemagick | CVE-2007-1667 | https://security-tracker.debian.org/tracker/CVE-2007-1667 imagemagick | CVE-2014-9804 | https://security-tracker.debian.org/tracker/CVE-2014-9804 imagemagick | CVE-2014-9805 | https://security-tracker.debian.org/tracker/CVE-2014-9805 imagemagick | CVE-2014-9806 | https://security-tracker.debian.org/tracker/CVE-2014-9806 imagemagick | CVE-2014-9807 | https://security-tracker.debian.org/tracker/CVE-2014-9807 imagemagick | CVE-2014-9808 | https://security-tracker.debian.org/tracker/CVE-2014-9808 imagemagick | CVE-2014-9809 | https://security-tracker.debian.org/tracker/CVE-2014-9809 imagemagick | CVE-2014-9810 | https://security-tracker.debian.org/tracker/CVE-2014-9810 imagemagick | CVE-2014-9811 | https://security-tracker.debian.org/tracker/CVE-2014-9811 imagemagick | CVE-2014-9812 | https://security-tracker.debian.org/tracker/CVE-2014-9812 imagemagick | CVE-2014-9813 | https://security-tracker.debian.org/tracker/CVE-2014-9813 imagemagick | CVE-2014-9814 | https://security-tracker.debian.org/tracker/CVE-2014-9814 imagemagick | CVE-2014-9815 | https://security-tracker.debian.org/tracker/CVE-2014-9815 imagemagick | CVE-2014-9816 | https://security-tracker.debian.org/tracker/CVE-2014-9816 imagemagick | CVE-2014-9817 | https://security-tracker.debian.org/tracker/CVE-2014-9817 imagemagick | CVE-2014-9818 | https://security-tracker.debian.org/tracker/CVE-2014-9818 imagemagick | CVE-2014-9819 | https://security-tracker.debian.org/tracker/CVE-2014-9819 imagemagick | CVE-2014-9820 | https://security-tracker.debian.org/tracker/CVE-2014-9820 imagemagick | CVE-2014-9821 | https://security-tracker.debian.org/tracker/CVE-2014-9821 imagemagick | CVE-2014-9822 | https://security-tracker.debian.org/tracker/CVE-2014-9822 imagemagick | CVE-2014-9823 | https://security-tracker.debian.org/tracker/CVE-2014-9823 imagemagick | CVE-2014-9824 | https://security-tracker.debian.org/tracker/CVE-2014-9824 imagemagick | CVE-2014-9825 | https://security-tracker.debian.org/tracker/CVE-2014-9825 imagemagick | CVE-2014-9826 | https://security-tracker.debian.org/tracker/CVE-2014-9826 imagemagick | CVE-2014-9827 | https://security-tracker.debian.org/tracker/CVE-2014-9827 imagemagick | CVE-2014-9828 | https://security-tracker.debian.org/tracker/CVE-2014-9828 imagemagick | CVE-2014-9829 | https://security-tracker.debian.org/tracker/CVE-2014-9829 imagemagick | CVE-2014-9830 | https://security-tracker.debian.org/tracker/CVE-2014-9830 imagemagick | CVE-2014-9831 | https://security-tracker.debian.org/tracker/CVE-2014-9831 imagemagick | CVE-2014-9848 | https://security-tracker.debian.org/tracker/CVE-2014-9848 imagemagick | CVE-2014-9852 | https://security-tracker.debian.org/tracker/CVE-2014-9852 imagemagick | CVE-2014-9853 | https://security-tracker.debian.org/tracker/CVE-2014-9853 imagemagick | CVE-2014-9854 | https://security-tracker.debian.org/tracker/CVE-2014-9854 imagemagick | CVE-2014-9907 | https://security-tracker.debian.org/tracker/CVE-2014-9907 imagemagick | CVE-2016-10062 | https://security-tracker.debian.org/tracker/CVE-2016-10062 imagemagick | CVE-2016-10144 | https://security-tracker.debian.org/tracker/CVE-2016-10144 imagemagick | CVE-2016-10145 | https://security-tracker.debian.org/tracker/CVE-2016-10145 imagemagick | CVE-2016-10146 | https://security-tracker.debian.org/tracker/CVE-2016-10146 imagemagick | CVE-2016-7513 | https://security-tracker.debian.org/tracker/CVE-2016-7513 imagemagick | CVE-2016-7514 | https://security-tracker.debian.org/tracker/CVE-2016-7514 imagemagick | CVE-2016-7515 | https://security-tracker.debian.org/tracker/CVE-2016-7515 imagemagick | CVE-2016-7516 | https://security-tracker.debian.org/tracker/CVE-2016-7516 imagemagick | CVE-2016-7517 | https://security-tracker.debian.org/tracker/CVE-2016-7517 imagemagick | CVE-2016-7518 | https://security-tracker.debian.org/tracker/CVE-2016-7518 imagemagick | CVE-2016-7519 | https://security-tracker.debian.org/tracker/CVE-2016-7519 imagemagick | CVE-2016-7520 | https://security-tracker.debian.org/tracker/CVE-2016-7520 imagemagick | CVE-2016-7521 | https://security-tracker.debian.org/tracker/CVE-2016-7521 imagemagick | CVE-2016-7522 | https://security-tracker.debian.org/tracker/CVE-2016-7522 imagemagick | CVE-2016-7523 | https://security-tracker.debian.org/tracker/CVE-2016-7523 imagemagick | CVE-2016-7524 | https://security-tracker.debian.org/tracker/CVE-2016-7524 imagemagick | CVE-2016-7525 | https://security-tracker.debian.org/tracker/CVE-2016-7525 imagemagick | CVE-2016-7526 | https://security-tracker.debian.org/tracker/CVE-2016-7526 imagemagick | CVE-2016-7527 | https://security-tracker.debian.org/tracker/CVE-2016-7527 imagemagick | CVE-2016-7528 | https://security-tracker.debian.org/tracker/CVE-2016-7528 imagemagick | CVE-2016-7529 | https://security-tracker.debian.org/tracker/CVE-2016-7529 imagemagick | CVE-2016-7530 | https://security-tracker.debian.org/tracker/CVE-2016-7530 imagemagick | CVE-2016-7531 | https://security-tracker.debian.org/tracker/CVE-2016-7531 imagemagick | CVE-2016-7532 | https://security-tracker.debian.org/tracker/CVE-2016-7532 imagemagick | CVE-2016-7533 | https://security-tracker.debian.org/tracker/CVE-2016-7533 imagemagick | CVE-2016-7534 | https://security-tracker.debian.org/tracker/CVE-2016-7534 imagemagick | CVE-2016-7535 | https://security-tracker.debian.org/tracker/CVE-2016-7535 imagemagick | CVE-2016-7536 | https://security-tracker.debian.org/tracker/CVE-2016-7536 imagemagick | CVE-2016-7537 | https://security-tracker.debian.org/tracker/CVE-2016-7537 imagemagick | CVE-2016-7538 | https://security-tracker.debian.org/tracker/CVE-2016-7538 imagemagick | CVE-2017-5506 | https://security-tracker.debian.org/tracker/CVE-2017-5506 imagemagick | CVE-2017-5509 | https://security-tracker.debian.org/tracker/CVE-2017-5509 imagemagick | CVE-2017-5510 | https://security-tracker.debian.org/tracker/CVE-2017-5510 imagemagick | CVE-2017-5511 | https://security-tracker.debian.org/tracker/CVE-2017-5511 imagemagick | CVE-2022-3213 | https://security-tracker.debian.org/tracker/CVE-2022-3213 jasper | CVE-2015-8751 | https://security-tracker.debian.org/tracker/CVE-2015-8751 jhead | CVE-2022-41751 | https://security-tracker.debian.org/tracker/CVE-2022-41751 jquery | CVE-2007-2379 | https://security-tracker.debian.org/tracker/CVE-2007-2379 libao | CVE-2017-11548 | https://security-tracker.debian.org/tracker/CVE-2017-11548 libfreeimage | CVE-2019-12211 | https://security-tracker.debian.org/tracker/CVE-2019-12211 libfreeimage | CVE-2019-12212 | https://security-tracker.debian.org/tracker/CVE-2019-12212 libfreeimage | CVE-2019-12213 | https://security-tracker.debian.org/tracker/CVE-2019-12213 libfreeimage | CVE-2019-12214 | https://security-tracker.debian.org/tracker/CVE-2019-12214 libiberty | CVE-2012-3509 | https://security-tracker.debian.org/tracker/CVE-2012-3509 libiberty | CVE-2016-2226 | https://security-tracker.debian.org/tracker/CVE-2016-2226 libiberty | CVE-2016-4487 | https://security-tracker.debian.org/tracker/CVE-2016-4487 libiberty | CVE-2016-4488 | https://security-tracker.debian.org/tracker/CVE-2016-4488 libiberty | CVE-2016-4489 | https://security-tracker.debian.org/tracker/CVE-2016-4489 libiberty | CVE-2016-4490 | https://security-tracker.debian.org/tracker/CVE-2016-4490 libiberty | CVE-2016-4491 | https://security-tracker.debian.org/tracker/CVE-2016-4491 libiberty | CVE-2016-4492 | https://security-tracker.debian.org/tracker/CVE-2016-4492 libiberty | CVE-2016-4493 | https://security-tracker.debian.org/tracker/CVE-2016-4493 libiberty | CVE-2016-6131 | https://security-tracker.debian.org/tracker/CVE-2016-6131 libkrb5 | CVE-1999-0143 | https://security-tracker.debian.org/tracker/CVE-1999-0143 libkrb5 | CVE-1999-0713 | https://security-tracker.debian.org/tracker/CVE-1999-0713 libkrb5 | CVE-2007-3149 | https://security-tracker.debian.org/tracker/CVE-2007-3149 libkrb5 | CVE-2007-5894 | https://security-tracker.debian.org/tracker/CVE-2007-5894 libkrb5 | CVE-2007-5902 | https://security-tracker.debian.org/tracker/CVE-2007-5902 libkrb5 | CVE-2009-0844 | https://security-tracker.debian.org/tracker/CVE-2009-0844 libkrb5 | CVE-2009-0846 | https://security-tracker.debian.org/tracker/CVE-2009-0846 libmad | CVE-2018-7263 | https://security-tracker.debian.org/tracker/CVE-2018-7263 libmpeg2 | CVE-2022-37416 | https://security-tracker.debian.org/tracker/CVE-2022-37416 libosip2 | CVE-2022-41550 | https://security-tracker.debian.org/tracker/CVE-2022-41550 libplist | CVE-2017-5834 | https://security-tracker.debian.org/tracker/CVE-2017-5834 libplist | CVE-2017-5835 | https://security-tracker.debian.org/tracker/CVE-2017-5835 libplist | CVE-2017-5836 | https://security-tracker.debian.org/tracker/CVE-2017-5836 libraw | CVE-2020-35530 | https://security-tracker.debian.org/tracker/CVE-2020-35530 libraw | CVE-2020-35531 | https://security-tracker.debian.org/tracker/CVE-2020-35531 libraw | CVE-2020-35532 | https://security-tracker.debian.org/tracker/CVE-2020-35532 libraw | CVE-2020-35533 | https://security-tracker.debian.org/tracker/CVE-2020-35533 libraw | CVE-2020-35534 | https://security-tracker.debian.org/tracker/CVE-2020-35534 libraw | CVE-2020-35535 | https://security-tracker.debian.org/tracker/CVE-2020-35535 libtasn1 | CVE-2021-46848 | https://security-tracker.debian.org/tracker/CVE-2021-46848 libtorrent | CVE-2009-1760 | https://security-tracker.debian.org/tracker/CVE-2009-1760 libtorrent | CVE-2016-5301 | https://security-tracker.debian.org/tracker/CVE-2016-5301 libvirt | CVE-2014-8135 | https://security-tracker.debian.org/tracker/CVE-2014-8135 libvirt | CVE-2014-8136 | https://security-tracker.debian.org/tracker/CVE-2014-8136 libvirt | CVE-2015-5313 | https://security-tracker.debian.org/tracker/CVE-2015-5313 libvirt | CVE-2018-5748 | https://security-tracker.debian.org/tracker/CVE-2018-5748 libvirt | CVE-2018-6764 | https://security-tracker.debian.org/tracker/CVE-2018-6764 libvncserver | CVE-2020-29260 | https://security-tracker.debian.org/tracker/CVE-2020-29260 libxml2 | CVE-2016-3709 | https://security-tracker.debian.org/tracker/CVE-2016-3709 libxslt | CVE-2022-29824 | https://security-tracker.debian.org/tracker/CVE-2022-29824 lighttpd | CVE-2022-37797 | https://security-tracker.debian.org/tracker/CVE-2022-37797 lighttpd | CVE-2022-41556 | https://security-tracker.debian.org/tracker/CVE-2022-41556 linux-pam | CVE-2022-28321 | https://security-tracker.debian.org/tracker/CVE-2022-28321 lrzip | CVE-2021-33451 | https://security-tracker.debian.org/tracker/CVE-2021-33451 lrzip | CVE-2021-33453 | https://security-tracker.debian.org/tracker/CVE-2021-33453 lrzip | CVE-2022-26291 | https://security-tracker.debian.org/tracker/CVE-2022-26291 lrzsz | CVE-2018-10195 | https://security-tracker.debian.org/tracker/CVE-2018-10195 lua | CVE-2014-5461 | https://security-tracker.debian.org/tracker/CVE-2014-5461 lua | CVE-2020-15888 | https://security-tracker.debian.org/tracker/CVE-2020-15888 lua | CVE-2020-15945 | https://security-tracker.debian.org/tracker/CVE-2020-15945 lua | CVE-2021-43519 | https://security-tracker.debian.org/tracker/CVE-2021-43519 mbedtls | CVE-2021-45450 | https://security-tracker.debian.org/tracker/CVE-2021-45450 mbedtls | CVE-2021-45451 | https://security-tracker.debian.org/tracker/CVE-2021-45451 minetest | CVE-2022-35978 | https://security-tracker.debian.org/tracker/CVE-2022-35978 mongodb | CVE-2014-8180 | https://security-tracker.debian.org/tracker/CVE-2014-8180 mongodb | CVE-2017-18381 | https://security-tracker.debian.org/tracker/CVE-2017-18381 mongodb | CVE-2017-2665 | https://security-tracker.debian.org/tracker/CVE-2017-2665 mupdf | CVE-2021-4216 | https://security-tracker.debian.org/tracker/CVE-2021-4216 mutt | CVE-2011-1429 | https://security-tracker.debian.org/tracker/CVE-2011-1429 nasm | CVE-2020-18974 | https://security-tracker.debian.org/tracker/CVE-2020-18974 ncurses | CVE-2021-39537 | https://security-tracker.debian.org/tracker/CVE-2021-39537 ncurses | CVE-2022-29458 | https://security-tracker.debian.org/tracker/CVE-2022-29458 nginx | CVE-2021-3618 | https://security-tracker.debian.org/tracker/CVE-2021-3618 nginx | CVE-2022-3638 | https://security-tracker.debian.org/tracker/CVE-2022-3638 ntp | CVE-2014-9750 | https://security-tracker.debian.org/tracker/CVE-2014-9750 ntp | CVE-2014-9751 | https://security-tracker.debian.org/tracker/CVE-2014-9751 ntp | CVE-2015-7691 | https://security-tracker.debian.org/tracker/CVE-2015-7691 ntp | CVE-2015-7692 | https://security-tracker.debian.org/tracker/CVE-2015-7692 ntp | CVE-2015-7701 | https://security-tracker.debian.org/tracker/CVE-2015-7701 ntp | CVE-2015-7702 | https://security-tracker.debian.org/tracker/CVE-2015-7702 ntp | CVE-2015-7703 | https://security-tracker.debian.org/tracker/CVE-2015-7703 ntp | CVE-2015-7704 | https://security-tracker.debian.org/tracker/CVE-2015-7704 ntp | CVE-2015-7705 | https://security-tracker.debian.org/tracker/CVE-2015-7705 ntp | CVE-2015-7849 | https://security-tracker.debian.org/tracker/CVE-2015-7849 ntp | CVE-2015-7850 | https://security-tracker.debian.org/tracker/CVE-2015-7850 ntp | CVE-2015-7852 | https://security-tracker.debian.org/tracker/CVE-2015-7852 ntp | CVE-2015-7853 | https://security-tracker.debian.org/tracker/CVE-2015-7853 ntp | CVE-2015-7854 | https://security-tracker.debian.org/tracker/CVE-2015-7854 ntp | CVE-2015-7855 | https://security-tracker.debian.org/tracker/CVE-2015-7855 ntp | CVE-2015-7973 | https://security-tracker.debian.org/tracker/CVE-2015-7973 ntp | CVE-2015-7974 | https://security-tracker.debian.org/tracker/CVE-2015-7974 ntp | CVE-2015-7977 | https://security-tracker.debian.org/tracker/CVE-2015-7977 ntp | CVE-2016-2518 | https://security-tracker.debian.org/tracker/CVE-2016-2518 ntp | CVE-2016-4953 | https://security-tracker.debian.org/tracker/CVE-2016-4953 ntp | CVE-2016-4954 | https://security-tracker.debian.org/tracker/CVE-2016-4954 ntp | CVE-2016-4955 | https://security-tracker.debian.org/tracker/CVE-2016-4955 ntp | CVE-2016-4956 | https://security-tracker.debian.org/tracker/CVE-2016-4956 ntp | CVE-2016-7426 | https://security-tracker.debian.org/tracker/CVE-2016-7426 ntp | CVE-2016-7434 | https://security-tracker.debian.org/tracker/CVE-2016-7434 ntp | CVE-2017-6458 | https://security-tracker.debian.org/tracker/CVE-2017-6458 ntp | CVE-2018-7170 | https://security-tracker.debian.org/tracker/CVE-2018-7170 ntp | CVE-2018-7185 | https://security-tracker.debian.org/tracker/CVE-2018-7185 ntp | CVE-2019-11331 | https://security-tracker.debian.org/tracker/CVE-2019-11331 ntp | CVE-2019-8936 | https://security-tracker.debian.org/tracker/CVE-2019-8936 ntp | CVE-2020-11868 | https://security-tracker.debian.org/tracker/CVE-2020-11868 ntp | CVE-2020-13817 | https://security-tracker.debian.org/tracker/CVE-2020-13817 opencv3 | CVE-2019-14493 | https://security-tracker.debian.org/tracker/CVE-2019-14493 opencv3 | CVE-2019-15939 | https://security-tracker.debian.org/tracker/CVE-2019-15939 opencv3 | CVE-2019-19624 | https://security-tracker.debian.org/tracker/CVE-2019-19624 openjdk | CVE-2009-2475 | https://security-tracker.debian.org/tracker/CVE-2009-2475 openjdk | CVE-2009-2476 | https://security-tracker.debian.org/tracker/CVE-2009-2476 openjdk | CVE-2009-2689 | https://security-tracker.debian.org/tracker/CVE-2009-2689 openjdk | CVE-2009-2690 | https://security-tracker.debian.org/tracker/CVE-2009-2690 openjdk | CVE-2009-3728 | https://security-tracker.debian.org/tracker/CVE-2009-3728 openjdk | CVE-2009-3879 | https://security-tracker.debian.org/tracker/CVE-2009-3879 openjdk | CVE-2009-3880 | https://security-tracker.debian.org/tracker/CVE-2009-3880 openjdk | CVE-2009-3881 | https://security-tracker.debian.org/tracker/CVE-2009-3881 openjdk | CVE-2009-3882 | https://security-tracker.debian.org/tracker/CVE-2009-3882 openjdk | CVE-2009-3883 | https://security-tracker.debian.org/tracker/CVE-2009-3883 openjdk | CVE-2009-3884 | https://security-tracker.debian.org/tracker/CVE-2009-3884 openjdk | CVE-2013-0169 | https://security-tracker.debian.org/tracker/CVE-2013-0169 openjdk | CVE-2022-21540 | https://security-tracker.debian.org/tracker/CVE-2022-21540 openjdk | CVE-2022-21541 | https://security-tracker.debian.org/tracker/CVE-2022-21541 openjdk | CVE-2022-34169 | https://security-tracker.debian.org/tracker/CVE-2022-34169 openjpeg | CVE-2015-1239 | https://security-tracker.debian.org/tracker/CVE-2015-1239 openjpeg | CVE-2016-9675 | https://security-tracker.debian.org/tracker/CVE-2016-9675 openldap | CVE-2015-3276 | https://security-tracker.debian.org/tracker/CVE-2015-3276 openldap | CVE-2022-29155 | https://security-tracker.debian.org/tracker/CVE-2022-29155 openssh | CVE-2007-2768 | https://security-tracker.debian.org/tracker/CVE-2007-2768 openssh | CVE-2008-3844 | https://security-tracker.debian.org/tracker/CVE-2008-3844 openssh | CVE-2014-9278 | https://security-tracker.debian.org/tracker/CVE-2014-9278 openswan | CVE-2019-10155 | https://security-tracker.debian.org/tracker/CVE-2019-10155 opus | CVE-2022-25345 | https://security-tracker.debian.org/tracker/CVE-2022-25345 p7zip | CVE-2017-17969 | https://security-tracker.debian.org/tracker/CVE-2017-17969 p7zip | CVE-2018-5996 | https://security-tracker.debian.org/tracker/CVE-2018-5996 patch | CVE-2018-6952 | https://security-tracker.debian.org/tracker/CVE-2018-6952 patch | CVE-2019-20633 | https://security-tracker.debian.org/tracker/CVE-2019-20633 php | CVE-2007-2728 | https://security-tracker.debian.org/tracker/CVE-2007-2728 php | CVE-2007-3205 | https://security-tracker.debian.org/tracker/CVE-2007-3205 php | CVE-2007-4596 | https://security-tracker.debian.org/tracker/CVE-2007-4596 php | CVE-2022-31628 | https://security-tracker.debian.org/tracker/CVE-2022-31628 php | CVE-2022-31629 | https://security-tracker.debian.org/tracker/CVE-2022-31629 poppler | CVE-2021-30860 | https://security-tracker.debian.org/tracker/CVE-2021-30860 poppler | CVE-2022-38171 | https://security-tracker.debian.org/tracker/CVE-2022-38171 poppler | CVE-2022-38784 | https://security-tracker.debian.org/tracker/CVE-2022-38784 postgresql | CVE-2017-8806 | https://security-tracker.debian.org/tracker/CVE-2017-8806 powerpc-utils | CVE-2014-8165 | https://security-tracker.debian.org/tracker/CVE-2014-8165 pppd | CVE-2018-11574 | https://security-tracker.debian.org/tracker/CVE-2018-11574 python-aiohttp | CVE-2022-33124 | https://security-tracker.debian.org/tracker/CVE-2022-33124 python-django | CVE-2022-36359 | https://security-tracker.debian.org/tracker/CVE-2022-36359 python-django | CVE-2022-41323 | https://security-tracker.debian.org/tracker/CVE-2022-41323 python-m2crypto | CVE-2020-25657 | https://security-tracker.debian.org/tracker/CVE-2020-25657 python-pip | CVE-2018-20225 | https://security-tracker.debian.org/tracker/CVE-2018-20225 python-py | CVE-2022-42969 | https://security-tracker.debian.org/tracker/CVE-2022-42969 python-twisted | CVE-2022-24801 | https://security-tracker.debian.org/tracker/CVE-2022-24801 python-twisted | CVE-2022-39348 | https://security-tracker.debian.org/tracker/CVE-2022-39348 qemu | CVE-2018-18438 | https://security-tracker.debian.org/tracker/CVE-2018-18438 qemu | CVE-2019-12067 | https://security-tracker.debian.org/tracker/CVE-2019-12067 qemu | CVE-2021-20255 | https://security-tracker.debian.org/tracker/CVE-2021-20255 qemu | CVE-2022-2962 | https://security-tracker.debian.org/tracker/CVE-2022-2962 qemu | CVE-2022-3165 | https://security-tracker.debian.org/tracker/CVE-2022-3165 qemu | CVE-2022-35414 | https://security-tracker.debian.org/tracker/CVE-2022-35414 quagga | CVE-2016-4049 | https://security-tracker.debian.org/tracker/CVE-2016-4049 quagga | CVE-2017-3224 | https://security-tracker.debian.org/tracker/CVE-2017-3224 quagga | CVE-2021-44038 | https://security-tracker.debian.org/tracker/CVE-2021-44038 rabbitmq-server | CVE-2020-5419 | https://security-tracker.debian.org/tracker/CVE-2020-5419 rabbitmq-server | CVE-2021-22116 | https://security-tracker.debian.org/tracker/CVE-2021-22116 rabbitmq-server | CVE-2021-22117 | https://security-tracker.debian.org/tracker/CVE-2021-22117 rabbitmq-server | CVE-2021-32718 | https://security-tracker.debian.org/tracker/CVE-2021-32718 rabbitmq-server | CVE-2021-32719 | https://security-tracker.debian.org/tracker/CVE-2021-32719 rabbitmq-server | CVE-2022-31008 | https://security-tracker.debian.org/tracker/CVE-2022-31008 resiprocate | CVE-2017-9454 | https://security-tracker.debian.org/tracker/CVE-2017-9454 rpm | CVE-2021-3521 | https://security-tracker.debian.org/tracker/CVE-2021-3521 rpm | CVE-2021-35937 | https://security-tracker.debian.org/tracker/CVE-2021-35937 rpm | CVE-2021-35938 | https://security-tracker.debian.org/tracker/CVE-2021-35938 rpm | CVE-2021-35939 | https://security-tracker.debian.org/tracker/CVE-2021-35939 samba4 | CVE-2011-2411 | https://security-tracker.debian.org/tracker/CVE-2011-2411 samba4 | CVE-2021-3670 | https://security-tracker.debian.org/tracker/CVE-2021-3670 samba4 | CVE-2022-1615 | https://security-tracker.debian.org/tracker/CVE-2022-1615 samba4 | CVE-2022-2031 | https://security-tracker.debian.org/tracker/CVE-2022-2031 samba4 | CVE-2022-32742 | https://security-tracker.debian.org/tracker/CVE-2022-32742 samba4 | CVE-2022-32743 | https://security-tracker.debian.org/tracker/CVE-2022-32743 samba4 | CVE-2022-32744 | https://security-tracker.debian.org/tracker/CVE-2022-32744 samba4 | CVE-2022-32745 | https://security-tracker.debian.org/tracker/CVE-2022-32745 samba4 | CVE-2022-32746 | https://security-tracker.debian.org/tracker/CVE-2022-32746 sdl | CVE-2019-13616 | https://security-tracker.debian.org/tracker/CVE-2019-13616 sdl | CVE-2019-14906 | https://security-tracker.debian.org/tracker/CVE-2019-14906 sdl | CVE-2019-7572 | https://security-tracker.debian.org/tracker/CVE-2019-7572 sdl | CVE-2019-7573 | https://security-tracker.debian.org/tracker/CVE-2019-7573 sdl | CVE-2019-7574 | https://security-tracker.debian.org/tracker/CVE-2019-7574 sdl | CVE-2019-7575 | https://security-tracker.debian.org/tracker/CVE-2019-7575 sdl | CVE-2019-7576 | https://security-tracker.debian.org/tracker/CVE-2019-7576 sdl | CVE-2019-7577 | https://security-tracker.debian.org/tracker/CVE-2019-7577 sdl | CVE-2019-7578 | https://security-tracker.debian.org/tracker/CVE-2019-7578 sdl | CVE-2019-7635 | https://security-tracker.debian.org/tracker/CVE-2019-7635 sdl | CVE-2019-7636 | https://security-tracker.debian.org/tracker/CVE-2019-7636 sdl | CVE-2019-7637 | https://security-tracker.debian.org/tracker/CVE-2019-7637 sdl | CVE-2019-7638 | https://security-tracker.debian.org/tracker/CVE-2019-7638 sdl | CVE-2020-14409 | https://security-tracker.debian.org/tracker/CVE-2020-14409 sdl | CVE-2020-14410 | https://security-tracker.debian.org/tracker/CVE-2020-14410 sdl | CVE-2022-34568 | https://security-tracker.debian.org/tracker/CVE-2022-34568 shapelib | CVE-2022-0699 | https://security-tracker.debian.org/tracker/CVE-2022-0699 smack | CVE-2014-0363 | https://security-tracker.debian.org/tracker/CVE-2014-0363 smack | CVE-2014-0364 | https://security-tracker.debian.org/tracker/CVE-2014-0364 smack | CVE-2016-10027 | https://security-tracker.debian.org/tracker/CVE-2016-10027 spice | CVE-2016-0749 | https://security-tracker.debian.org/tracker/CVE-2016-0749 spice | CVE-2016-2150 | https://security-tracker.debian.org/tracker/CVE-2016-2150 spice | CVE-2018-10893 | https://security-tracker.debian.org/tracker/CVE-2018-10893 thttpd | CVE-2012-5640 | https://security-tracker.debian.org/tracker/CVE-2012-5640 tiff | CVE-2015-7313 | https://security-tracker.debian.org/tracker/CVE-2015-7313 tiff | CVE-2022-2056 | https://security-tracker.debian.org/tracker/CVE-2022-2056 tiff | CVE-2022-2057 | https://security-tracker.debian.org/tracker/CVE-2022-2057 tiff | CVE-2022-2058 | https://security-tracker.debian.org/tracker/CVE-2022-2058 tiff | CVE-2022-2519 | https://security-tracker.debian.org/tracker/CVE-2022-2519 tiff | CVE-2022-2520 | https://security-tracker.debian.org/tracker/CVE-2022-2520 tiff | CVE-2022-2521 | https://security-tracker.debian.org/tracker/CVE-2022-2521 tiff | CVE-2022-2953 | https://security-tracker.debian.org/tracker/CVE-2022-2953 tiff | CVE-2022-34526 | https://security-tracker.debian.org/tracker/CVE-2022-34526 tiff | CVE-2022-3570 | https://security-tracker.debian.org/tracker/CVE-2022-3570 tiff | CVE-2022-3597 | https://security-tracker.debian.org/tracker/CVE-2022-3597 tiff | CVE-2022-3598 | https://security-tracker.debian.org/tracker/CVE-2022-3598 tiff | CVE-2022-3599 | https://security-tracker.debian.org/tracker/CVE-2022-3599 tiff | CVE-2022-3626 | https://security-tracker.debian.org/tracker/CVE-2022-3626 tiff | CVE-2022-3627 | https://security-tracker.debian.org/tracker/CVE-2022-3627 tinc | CVE-2013-1428 | https://security-tracker.debian.org/tracker/CVE-2013-1428 tor | CVE-2016-9079 | https://security-tracker.debian.org/tracker/CVE-2016-9079 tor | CVE-2017-16541 | https://security-tracker.debian.org/tracker/CVE-2017-16541 uboot-tools | CVE-2022-2347 | https://security-tracker.debian.org/tracker/CVE-2022-2347 uboot-tools | CVE-2022-30767 | https://security-tracker.debian.org/tracker/CVE-2022-30767 uboot-tools | CVE-2022-33103 | https://security-tracker.debian.org/tracker/CVE-2022-33103 uboot-tools | CVE-2022-34835 | https://security-tracker.debian.org/tracker/CVE-2022-34835 unrar | CVE-2022-30333 | https://security-tracker.debian.org/tracker/CVE-2022-30333 unzip | CVE-2021-4217 | https://security-tracker.debian.org/tracker/CVE-2021-4217 vim | CVE-2022-3705 | https://security-tracker.debian.org/tracker/CVE-2022-3705 wayland | CVE-2021-3782 | https://security-tracker.debian.org/tracker/CVE-2021-3782 wireshark | CVE-2022-3190 | https://security-tracker.debian.org/tracker/CVE-2022-3190 xen | CVE-2011-1936 | https://security-tracker.debian.org/tracker/CVE-2011-1936 xen | CVE-2011-3346 | https://security-tracker.debian.org/tracker/CVE-2011-3346 xen | CVE-2014-2580 | https://security-tracker.debian.org/tracker/CVE-2014-2580 xen | CVE-2014-3672 | https://security-tracker.debian.org/tracker/CVE-2014-3672 xen | CVE-2015-7504 | https://security-tracker.debian.org/tracker/CVE-2015-7504 xen | CVE-2015-8550 | https://security-tracker.debian.org/tracker/CVE-2015-8550 xen | CVE-2015-8553 | https://security-tracker.debian.org/tracker/CVE-2015-8553 xen | CVE-2016-3960 | https://security-tracker.debian.org/tracker/CVE-2016-3960 xen | CVE-2016-7092 | https://security-tracker.debian.org/tracker/CVE-2016-7092 xen | CVE-2016-9379 | https://security-tracker.debian.org/tracker/CVE-2016-9379 xen | CVE-2016-9380 | https://security-tracker.debian.org/tracker/CVE-2016-9380 xen | CVE-2016-9383 | https://security-tracker.debian.org/tracker/CVE-2016-9383 xen | CVE-2016-9386 | https://security-tracker.debian.org/tracker/CVE-2016-9386 xen | CVE-2017-12134 | https://security-tracker.debian.org/tracker/CVE-2017-12134 xen | CVE-2017-12135 | https://security-tracker.debian.org/tracker/CVE-2017-12135 xen | CVE-2017-12137 | https://security-tracker.debian.org/tracker/CVE-2017-12137 xen | CVE-2017-7228 | https://security-tracker.debian.org/tracker/CVE-2017-7228 xen | CVE-2018-5244 | https://security-tracker.debian.org/tracker/CVE-2018-5244 xen | CVE-2018-8897 | https://security-tracker.debian.org/tracker/CVE-2018-8897 xen | CVE-2021-26313 | https://security-tracker.debian.org/tracker/CVE-2021-26313 xen | CVE-2021-26314 | https://security-tracker.debian.org/tracker/CVE-2021-26314 xen | CVE-2021-28038 | https://security-tracker.debian.org/tracker/CVE-2021-28038 xen | CVE-2021-28039 | https://security-tracker.debian.org/tracker/CVE-2021-28039 xen | CVE-2021-28687 | https://security-tracker.debian.org/tracker/CVE-2021-28687 xen | CVE-2021-28690 | https://security-tracker.debian.org/tracker/CVE-2021-28690 xen | CVE-2021-28692 | https://security-tracker.debian.org/tracker/CVE-2021-28692 xen | CVE-2021-28693 | https://security-tracker.debian.org/tracker/CVE-2021-28693 xen | CVE-2021-28694 | https://security-tracker.debian.org/tracker/CVE-2021-28694 xen | CVE-2021-28695 | https://security-tracker.debian.org/tracker/CVE-2021-28695 xen | CVE-2021-28696 | https://security-tracker.debian.org/tracker/CVE-2021-28696 xen | CVE-2021-28697 | https://security-tracker.debian.org/tracker/CVE-2021-28697 xen | CVE-2021-28698 | https://security-tracker.debian.org/tracker/CVE-2021-28698 xen | CVE-2021-28699 | https://security-tracker.debian.org/tracker/CVE-2021-28699 xen | CVE-2021-28700 | https://security-tracker.debian.org/tracker/CVE-2021-28700 xen | CVE-2021-28701 | https://security-tracker.debian.org/tracker/CVE-2021-28701 xen | CVE-2021-28702 | https://security-tracker.debian.org/tracker/CVE-2021-28702 xen | CVE-2021-28703 | https://security-tracker.debian.org/tracker/CVE-2021-28703 xen | CVE-2021-28704 | https://security-tracker.debian.org/tracker/CVE-2021-28704 xen | CVE-2021-28707 | https://security-tracker.debian.org/tracker/CVE-2021-28707 xen | CVE-2021-28708 | https://security-tracker.debian.org/tracker/CVE-2021-28708 xen | CVE-2021-28711 | https://security-tracker.debian.org/tracker/CVE-2021-28711 xen | CVE-2021-28712 | https://security-tracker.debian.org/tracker/CVE-2021-28712 xen | CVE-2021-28713 | https://security-tracker.debian.org/tracker/CVE-2021-28713 xen | CVE-2022-21123 | https://security-tracker.debian.org/tracker/CVE-2022-21123 xen | CVE-2022-21125 | https://security-tracker.debian.org/tracker/CVE-2022-21125 xen | CVE-2022-21127 | https://security-tracker.debian.org/tracker/CVE-2022-21127 xen | CVE-2022-21166 | https://security-tracker.debian.org/tracker/CVE-2022-21166 xen | CVE-2022-23033 | https://security-tracker.debian.org/tracker/CVE-2022-23033 xen | CVE-2022-23035 | https://security-tracker.debian.org/tracker/CVE-2022-23035 xen | CVE-2022-23036 | https://security-tracker.debian.org/tracker/CVE-2022-23036 xen | CVE-2022-23037 | https://security-tracker.debian.org/tracker/CVE-2022-23037 xen | CVE-2022-23038 | https://security-tracker.debian.org/tracker/CVE-2022-23038 xen | CVE-2022-23039 | https://security-tracker.debian.org/tracker/CVE-2022-23039 xen | CVE-2022-23040 | https://security-tracker.debian.org/tracker/CVE-2022-23040 xen | CVE-2022-23041 | https://security-tracker.debian.org/tracker/CVE-2022-23041 xen | CVE-2022-23042 | https://security-tracker.debian.org/tracker/CVE-2022-23042 xen | CVE-2022-23960 | https://security-tracker.debian.org/tracker/CVE-2022-23960 xen | CVE-2022-26357 | https://security-tracker.debian.org/tracker/CVE-2022-26357 xen | CVE-2022-26358 | https://security-tracker.debian.org/tracker/CVE-2022-26358 xen | CVE-2022-26359 | https://security-tracker.debian.org/tracker/CVE-2022-26359 xen | CVE-2022-26360 | https://security-tracker.debian.org/tracker/CVE-2022-26360 xen | CVE-2022-26361 | https://security-tracker.debian.org/tracker/CVE-2022-26361 xen | CVE-2022-26362 | https://security-tracker.debian.org/tracker/CVE-2022-26362 xen | CVE-2022-26363 | https://security-tracker.debian.org/tracker/CVE-2022-26363 xen | CVE-2022-26364 | https://security-tracker.debian.org/tracker/CVE-2022-26364 xen | CVE-2022-26365 | https://security-tracker.debian.org/tracker/CVE-2022-26365 xen | CVE-2022-29900 | https://security-tracker.debian.org/tracker/CVE-2022-29900 xen | CVE-2022-29901 | https://security-tracker.debian.org/tracker/CVE-2022-29901 xen | CVE-2022-33740 | https://security-tracker.debian.org/tracker/CVE-2022-33740 xen | CVE-2022-33741 | https://security-tracker.debian.org/tracker/CVE-2022-33741 xen | CVE-2022-33742 | https://security-tracker.debian.org/tracker/CVE-2022-33742 xen | CVE-2022-33743 | https://security-tracker.debian.org/tracker/CVE-2022-33743 xen | CVE-2022-33745 | https://security-tracker.debian.org/tracker/CVE-2022-33745 xen | CVE-2022-33746 | https://security-tracker.debian.org/tracker/CVE-2022-33746 xen | CVE-2022-33747 | https://security-tracker.debian.org/tracker/CVE-2022-33747 xen | CVE-2022-33748 | https://security-tracker.debian.org/tracker/CVE-2022-33748 xerces | CVE-2012-0880 | https://security-tracker.debian.org/tracker/CVE-2012-0880 xlib_libX11 | CVE-2022-3554 | https://security-tracker.debian.org/tracker/CVE-2022-3554 yasm | CVE-2021-33454 | https://security-tracker.debian.org/tracker/CVE-2021-33454 yasm | CVE-2021-33455 | https://security-tracker.debian.org/tracker/CVE-2021-33455 yasm | CVE-2021-33456 | https://security-tracker.debian.org/tracker/CVE-2021-33456 yasm | CVE-2021-33457 | https://security-tracker.debian.org/tracker/CVE-2021-33457 yasm | CVE-2021-33458 | https://security-tracker.debian.org/tracker/CVE-2021-33458 yasm | CVE-2021-33459 | https://security-tracker.debian.org/tracker/CVE-2021-33459 yasm | CVE-2021-33460 | https://security-tracker.debian.org/tracker/CVE-2021-33460 yasm | CVE-2021-33461 | https://security-tracker.debian.org/tracker/CVE-2021-33461 yasm | CVE-2021-33462 | https://security-tracker.debian.org/tracker/CVE-2021-33462 yasm | CVE-2021-33463 | https://security-tracker.debian.org/tracker/CVE-2021-33463 yasm | CVE-2021-33464 | https://security-tracker.debian.org/tracker/CVE-2021-33464 yasm | CVE-2021-33465 | https://security-tracker.debian.org/tracker/CVE-2021-33465 yasm | CVE-2021-33466 | https://security-tracker.debian.org/tracker/CVE-2021-33466 yasm | CVE-2021-33467 | https://security-tracker.debian.org/tracker/CVE-2021-33467 yasm | CVE-2021-33468 | https://security-tracker.debian.org/tracker/CVE-2021-33468 zip | CVE-2018-13410 | https://security-tracker.debian.org/tracker/CVE-2018-13410 -- http://autobuild.buildroot.net From yann.morin.1998 at free.fr Mon Oct 31 07:26:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:26:34 +0100 Subject: [Buildroot] [PATCH] package/gawk: drop incorrect patch Message-ID: <20221031072634.2986903-1-yann.morin.1998@free.fr> Commit 8cd06967b9be (gawk: bump version and migrate to autotargets) added a patch that purportedly reduced the installation size by not installing the versioned program (gawk-X.Y). However, the versioned program is a hard-link to the unversioned one, so, save for a directory entry, it does not take extra space in the final image. Drop that patch. Signed-off-by: Yann E. MORIN --- package/gawk/0001-no-versioned.patch | 16 ---------------- 1 file changed, 16 deletions(-) delete mode 100644 package/gawk/0001-no-versioned.patch diff --git a/package/gawk/0001-no-versioned.patch b/package/gawk/0001-no-versioned.patch deleted file mode 100644 index c5bbdddeb5..0000000000 --- a/package/gawk/0001-no-versioned.patch +++ /dev/null @@ -1,16 +0,0 @@ -Disabled versioned installation of binaries to save space. - -Signed-off-by: Gustavo Zacarias -[Gustavo: update for 4.1.2] - -diff -Nura gawk-4.1.2.orig/Makefile.in gawk-4.1.2/Makefile.in ---- gawk-4.1.2.orig/Makefile.in 2015-04-29 16:11:09.367925925 -0300 -+++ gawk-4.1.2/Makefile.in 2015-04-29 16:11:25.308466495 -0300 -@@ -1173,6 +1173,7 @@ - # (This is done universally, which may not always be right, but - # there's no easy way to distinguish GNU from non-GNU systems.) - install-exec-hook: -+foo: - (cd $(DESTDIR)$(bindir); \ - $(LN) gawk$(EXEEXT) gawk-$(VERSION)$(EXEEXT) 2>/dev/null ; \ - if [ ! -f awk$(EXEEXT) ]; \ -- 2.25.1 From yann.morin.1998 at free.fr Mon Oct 31 07:28:03 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:28:03 +0100 Subject: [Buildroot] [git commit] package/gawk: fix double free during kernel build Message-ID: <20221031074904.10D5B876DB@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e6942ad11ff03a587ba557aa359d2064f2371c38 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Backport an upstream patch to fix a crash during kernel build. Details: https://bugs.gentoo.org/868567 Fixes: GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c free(): double free detected in tcache 2 Aborted Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- .../gawk/0002-Fix-a-bug-with-Node_elem_new.patch | 155 +++++++++++++++++++++ 1 file changed, 155 insertions(+) diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch new file mode 100644 index 0000000000..502f7dcd95 --- /dev/null +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -0,0 +1,155 @@ +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 +From: "Arnold D. Robbins" +Date: Wed, 14 Sep 2022 21:08:59 +0300 +Subject: [PATCH] Fix a bug with Node_elem_new. + +Signed-off-by: James Hilliard +[james.hilliard1 at gmail.com: backport from upstream commit +baab183439ff4e0c6b77d62156d447e61fc1dcfb] +--- + ChangeLog | 8 ++++++++ + interpret.h | 1 + + test/ChangeLog | 5 +++++ + test/Makefile.am | 4 +++- + test/Makefile.in | 9 ++++++++- + test/Maketests | 5 +++++ + test/elemnew1.awk | 9 +++++++++ + test/elemnew1.ok | 0 + 8 files changed, 39 insertions(+), 2 deletions(-) + create mode 100644 test/elemnew1.awk + create mode 100644 test/elemnew1.ok + +diff --git a/ChangeLog b/ChangeLog +index 5fb25483..cd9d9fcd 100644 +--- a/ChangeLog ++++ b/ChangeLog +@@ -1,3 +1,11 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * interpret.h (r_interpret): For the `push' opcodes, upref ++ the Node_elem_new. See test case elemnew1. Thanks to ++ Emanuel Attila Czirai for the report, ++ and to Jan Alexander Steffens (heftig)" ++ for the fix. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/interpret.h b/interpret.h +index 57d060e6..268655b2 100644 +--- a/interpret.h ++++ b/interpret.h +@@ -238,6 +238,7 @@ uninitialized_scalar: + _("reference to uninitialized argument `%s'") : + _("reference to uninitialized variable `%s'"), + save_symbol->vname); ++ UPREF(m); + PUSH(m); + break; + +diff --git a/test/ChangeLog b/test/ChangeLog +index a73637bf..ea08edee 100644 +--- a/test/ChangeLog ++++ b/test/ChangeLog +@@ -1,3 +1,8 @@ ++2022-09-14 Arnold D. Robbins ++ ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. ++ * elemnew1.awk, elemnew1.ok: New files. ++ + 2022-09-04 Arnold D. Robbins + + * 5.2.0: Release tar ball made. +diff --git a/test/Makefile.am b/test/Makefile.am +index ab06974c..8a5c3c49 100644 +--- a/test/Makefile.am ++++ b/test/Makefile.am +@@ -282,6 +282,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +diff --git a/test/Makefile.in b/test/Makefile.in +index 834feb09..a4fb1cc1 100644 +--- a/test/Makefile.in ++++ b/test/Makefile.in +@@ -550,6 +550,8 @@ EXTRA_DIST = \ + dumpvars.ok \ + dynlj.awk \ + dynlj.ok \ ++ elemnew1.awk \ ++ elemnew1.ok \ + escapebrace.awk \ + escapebrace.in \ + escapebrace.ok \ +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ +@@ -4476,6 +4478,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/Maketests b/test/Maketests +index 3a667af8..90828e7f 100644 +--- a/test/Maketests ++++ b/test/Maketests +@@ -1432,6 +1432,11 @@ dfacheck1: + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ + ++elemnew1: ++ @echo $@ ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ ++ + exit: + @echo $@ + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ +diff --git a/test/elemnew1.awk b/test/elemnew1.awk +new file mode 100644 +index 00000000..58dc9fcd +--- /dev/null ++++ b/test/elemnew1.awk +@@ -0,0 +1,9 @@ ++function add_flags(old) { ++ if (old) ++ return 0 ++ if (!old) ++ return 1 ++} ++BEGIN { ++ a[0]=add_flags(a[0]) ++} +diff --git a/test/elemnew1.ok b/test/elemnew1.ok +new file mode 100644 +index 00000000..e69de29b +-- +2.34.1 + From yann.morin.1998 at free.fr Mon Oct 31 07:50:30 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 08:50:30 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build In-Reply-To: <20221030215458.3773991-1-james.hilliard1@gmail.com> References: <20221030215458.3773991-1-james.hilliard1@gmail.com> Message-ID: <20221031075030.GJ1058960@scaer> James, All, On 2022-10-30 15:54 -0600, James Hilliard spake thusly: > Backport an upstream patch to fix a crash during kernel build. > > Details: https://bugs.gentoo.org/868567 > > Fixes: > GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c > free(): double free detected in tcache 2 > Aborted > > Signed-off-by: James Hilliard Applied to master, thanks. That made me notice some cruft we've been carying for gawk, if you could have a quick look (patch renumbering missing, I sent it before applying your patch): https://patchwork.ozlabs.org/project/buildroot/patch/20221031072634.2986903-1-yann.morin.1998 at free.fr/ Regards, Yann E. MORIN. > --- > .../0002-Fix-a-bug-with-Node_elem_new.patch | 155 ++++++++++++++++++ > 1 file changed, 155 insertions(+) > create mode 100644 package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > > diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > new file mode 100644 > index 0000000000..502f7dcd95 > --- /dev/null > +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch > @@ -0,0 +1,155 @@ > +From baab183439ff4e0c6b77d62156d447e61fc1dcfb Mon Sep 17 00:00:00 2001 > +From: "Arnold D. Robbins" > +Date: Wed, 14 Sep 2022 21:08:59 +0300 > +Subject: [PATCH] Fix a bug with Node_elem_new. > + > +Signed-off-by: James Hilliard > +[james.hilliard1 at gmail.com: backport from upstream commit > +baab183439ff4e0c6b77d62156d447e61fc1dcfb] > +--- > + ChangeLog | 8 ++++++++ > + interpret.h | 1 + > + test/ChangeLog | 5 +++++ > + test/Makefile.am | 4 +++- > + test/Makefile.in | 9 ++++++++- > + test/Maketests | 5 +++++ > + test/elemnew1.awk | 9 +++++++++ > + test/elemnew1.ok | 0 > + 8 files changed, 39 insertions(+), 2 deletions(-) > + create mode 100644 test/elemnew1.awk > + create mode 100644 test/elemnew1.ok > + > +diff --git a/ChangeLog b/ChangeLog > +index 5fb25483..cd9d9fcd 100644 > +--- a/ChangeLog > ++++ b/ChangeLog > +@@ -1,3 +1,11 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * interpret.h (r_interpret): For the `push' opcodes, upref > ++ the Node_elem_new. See test case elemnew1. Thanks to > ++ Emanuel Attila Czirai for the report, > ++ and to Jan Alexander Steffens (heftig)" > ++ for the fix. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/interpret.h b/interpret.h > +index 57d060e6..268655b2 100644 > +--- a/interpret.h > ++++ b/interpret.h > +@@ -238,6 +238,7 @@ uninitialized_scalar: > + _("reference to uninitialized argument `%s'") : > + _("reference to uninitialized variable `%s'"), > + save_symbol->vname); > ++ UPREF(m); > + PUSH(m); > + break; > + > +diff --git a/test/ChangeLog b/test/ChangeLog > +index a73637bf..ea08edee 100644 > +--- a/test/ChangeLog > ++++ b/test/ChangeLog > +@@ -1,3 +1,8 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. > ++ * elemnew1.awk, elemnew1.ok: New files. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/test/Makefile.am b/test/Makefile.am > +index ab06974c..8a5c3c49 100644 > +--- a/test/Makefile.am > ++++ b/test/Makefile.am > +@@ -282,6 +282,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +diff --git a/test/Makefile.in b/test/Makefile.in > +index 834feb09..a4fb1cc1 100644 > +--- a/test/Makefile.in > ++++ b/test/Makefile.in > +@@ -550,6 +550,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +@@ -4476,6 +4478,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/Maketests b/test/Maketests > +index 3a667af8..90828e7f 100644 > +--- a/test/Maketests > ++++ b/test/Maketests > +@@ -1432,6 +1432,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/elemnew1.awk b/test/elemnew1.awk > +new file mode 100644 > +index 00000000..58dc9fcd > +--- /dev/null > ++++ b/test/elemnew1.awk > +@@ -0,0 +1,9 @@ > ++function add_flags(old) { > ++ if (old) > ++ return 0 > ++ if (!old) > ++ return 1 > ++} > ++BEGIN { > ++ a[0]=add_flags(a[0]) > ++} > +diff --git a/test/elemnew1.ok b/test/elemnew1.ok > +new file mode 100644 > +index 00000000..e69de29b > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 08:17:35 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 09:17:35 +0100 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir In-Reply-To: <20221031010904.1109541-1-james.hilliard1@gmail.com> References: <20221031010904.1109541-1-james.hilliard1@gmail.com> Message-ID: <20221031081735.GK1058960@scaer> James, All, +Daniel On 2022-10-30 19:09 -0600, James Hilliard spake thusly: > In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build > dependency, as such we also need to set --with-dbus-busdir which would > otherwise be pulled via pkg-config. > > Fixes: > checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required I was surprised that I did not have this error locally, but it only happens when systemd is enabled. So, rather than hard-code the path, I think I would prefer we add back a buid dependency on dbus when systemd is enabled: diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..6e366e094d 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -31,7 +31,8 @@ endif ifeq ($(BR2_PACKAGE_SYSTEMD),y) IWD_CONF_OPTS += --enable-systemd-service -IWD_DEPENDENCIES += systemd +# Need dbus for system_bus_services_dir variable provided by dbus' .pc +IWD_DEPENDENCIES += dbus systemd else IWD_CONF_OPTS += --disable-systemd-service endif Regards, Yann E. MORIN. > Signed-off-by: James Hilliard > --- > package/iwd/iwd.mk | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 002988cf33..e53ae595d7 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ > --disable-manual-pages \ > --enable-external-ell \ > --enable-dbus-policy \ > - --with-dbus-datadir=/usr/share > + --with-dbus-datadir=/usr/share \ > + --with-dbus-busdir=/usr/share/dbus-1/system-services > IWD_DEPENDENCIES = ell > > ifeq ($(BR2_PACKAGE_READLINE),y) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From ende.tan at starfivetech.com Mon Oct 31 08:28:41 2022 From: ende.tan at starfivetech.com (Tan En De) Date: Mon, 31 Oct 2022 16:28:41 +0800 Subject: [Buildroot] [1/1] DEVELOPERS: add myself for package/libkcapi Message-ID: <20221031082841.2781656-1-ende.tan@starfivetech.com> Add myself to help maintaining package/libkcapi. Signed-off-by: Tan En De --- As mentioned in the reply: https://lore.kernel.org/all/20221030114529.607f4e73 at windsurf/ Notice that I'm using ende.tan at starfivetech.com instead of ende.tan at linux.starfivetech.com because my company has changed SMTP server (the latter is still accessible). --- DEVELOPERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index c4d23cd293..90c28b375e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2775,6 +2775,9 @@ F: package/most/ N: TIAN Yuanhao F: package/open-isns/ +N: Tan En De +F: package/libkcapi/ + N: Theo Debrouwere F: board/beagleboardx15/ F: configs/beagleboardx15_defconfig -- 2.34.1 From yann.morin.1998 at free.fr Mon Oct 31 09:06:17 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:06:17 +0100 Subject: [Buildroot] [git commit] support/download/cargo-post-process: cargo output for vendor config Message-ID: <20221031090735.6164E87735@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=04154a6517294dbe11a8fd653557b429a6704466 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Use the output of `cargo vendor` to generate the vendor configuration. Fixes the need to patch the generated configuration if there are non-crates.io dependencies. Note: `cargo vendor` currently prints a newline before it prints the needed configuration. This is fixed in +nightly, will end up in +stable soon and must be considered when updating cargo. See: https://github.com/rust-lang/cargo/pull/11273 Until then it is needed to remove this first line to make sure that the contents of .cargo/config will be the same as they were generated with the earlier version of the script. Thus, the hashes of the packages that use this script remain the same. Signed-off-by: Simon Richter [yann.morin.1998 at free.fr: add comment in rust-bin.mk and rust.mk] Signed-off-by: Yann E. MORIN --- package/rust-bin/rust-bin.mk | 2 ++ package/rust/rust.mk | 2 ++ support/download/cargo-post-process | 26 +++++++++++++++++++------- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/package/rust-bin/rust-bin.mk b/package/rust-bin/rust-bin.mk index 6560151d99..a356acd3dc 100644 --- a/package/rust-bin/rust-bin.mk +++ b/package/rust-bin/rust-bin.mk @@ -4,6 +4,8 @@ # ################################################################################ +# When updating this version, check whether support/download/cargo-post-process +# still generates the same archives. RUST_BIN_VERSION = 1.64.0 RUST_BIN_SITE = https://static.rust-lang.org/dist RUST_BIN_LICENSE = Apache-2.0 or MIT diff --git a/package/rust/rust.mk b/package/rust/rust.mk index 411dda21c4..4b5e5fac48 100644 --- a/package/rust/rust.mk +++ b/package/rust/rust.mk @@ -4,6 +4,8 @@ # ################################################################################ +# When updating this version, check whether support/download/cargo-post-process +# still generates the same archives. RUST_VERSION = 1.64.0 RUST_SOURCE = rustc-$(RUST_VERSION)-src.tar.xz RUST_SITE = https://static.rust-lang.org/dist diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process index a4a4718a2a..186e9eb69b 100755 --- a/support/download/cargo-post-process +++ b/support/download/cargo-post-process @@ -1,6 +1,7 @@ #!/usr/bin/env bash set -e +set -o pipefail . "${0%/*}/helpers" @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" # Do the Cargo vendoring pushd "${base_name}" > /dev/null -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR # Create the local .cargo/config with vendor info +# +# The first line of the output to stdout is empty. +# So skip it to have the file start with the vendoring +# configuration (`tail --lines=+2`). +# +# NOTE: +# There is a patch for cargo to remove the first empty line: +# See: https://github.com/rust-lang/cargo/pull/11273 +# +# The patch already landed in +nightly and will end up +# in +stable soon. +# +# -> When updating rust/cargo, the call to `tail` must be removed. +# mkdir -p .cargo/ -cat <.cargo/config -[source.crates-io] -replace-with = "vendored-sources" +cargo vendor \ + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ + --locked VENDOR \ + | tail --lines=+2 | tee .cargo/config -[source.vendored-sources] -directory = "VENDOR" -EOF popd > /dev/null post_process_repack "$(pwd)" "${base_name}" "${output}" From yann.morin.1998 at free.fr Mon Oct 31 09:08:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:08:31 +0100 Subject: [Buildroot] [PATCH v2] support/download/cargo-post-process: cargo output for vendor config In-Reply-To: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> References: <20221025100200.78438-1-simon.richter@ptwdosimetry.com> Message-ID: <20221031090831.GL1058960@scaer> Simon, All, On 2022-10-25 12:02 +0200, Simon Richter spake thusly: > Use the output of `cargo vendor` to generate the vendor configuration. > > Fixes the need to patch the generated configuration if there are > non-crates.io dependencies. > > Note: > `cargo vendor` currently prints a newline before it prints the > needed configuration. > > This is fixed in +nightly, will end up in +stable soon and must > be considered when updating cargo. > See: https://github.com/rust-lang/cargo/pull/11273 This is going to need care when we bump, so I added a little comment in rust-bin.mk and rust.mk tocheck that a version bump still generates the same archives. > Until then it is needed to remove this first line to make sure > that the contents of .cargo/config will be the same as they were > generated with the earlier version of the script. Thus, the > hashes of the packages that use this script remain the same. > > Signed-off-by: Simon Richter Applied to master, thanks. Regards, Yann E. MORIN. > --- > support/download/cargo-post-process | 26 +++++++++++++++++++------- > 1 file changed, 19 insertions(+), 7 deletions(-) > > diff --git a/support/download/cargo-post-process b/support/download/cargo-post-process > index a4a4718a2a..186e9eb69b 100755 > --- a/support/download/cargo-post-process > +++ b/support/download/cargo-post-process > @@ -1,6 +1,7 @@ > #!/usr/bin/env bash > > set -e > +set -o pipefail > > . "${0%/*}/helpers" > > @@ -22,17 +23,28 @@ post_process_unpack "${base_name}" "${output}" > > # Do the Cargo vendoring > pushd "${base_name}" > /dev/null > -cargo vendor --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} --locked VENDOR > > # Create the local .cargo/config with vendor info > +# > +# The first line of the output to stdout is empty. > +# So skip it to have the file start with the vendoring > +# configuration (`tail --lines=+2`). > +# > +# NOTE: > +# There is a patch for cargo to remove the first empty line: > +# See: https://github.com/rust-lang/cargo/pull/11273 > +# > +# The patch already landed in +nightly and will end up > +# in +stable soon. > +# > +# -> When updating rust/cargo, the call to `tail` must be removed. > +# > mkdir -p .cargo/ > -cat <.cargo/config > -[source.crates-io] > -replace-with = "vendored-sources" > +cargo vendor \ > + --manifest-path ${BR_CARGO_MANIFEST_PATH-Cargo.toml} \ > + --locked VENDOR \ > + | tail --lines=+2 | tee .cargo/config > > -[source.vendored-sources] > -directory = "VENDOR" > -EOF > popd > /dev/null > > post_process_repack "$(pwd)" "${base_name}" "${output}" > -- > 2.38.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:21:51 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:21:51 +0100 Subject: [Buildroot] [PATCH] package/uclibc-ng-test: update to latest git In-Reply-To: (Waldemar Brodkorb's message of "Sun, 2 Oct 2022 13:59:59 +0200") References: Message-ID: <87k04guz4g.fsf@dell.be.48ers.dk> >>>>> "Waldemar" == Waldemar Brodkorb writes: > Fixes a musl autobuild compile error, see > http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ > Signed-off-by: Waldemar Brodkorb Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 31 09:22:47 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:47 +0100 Subject: [Buildroot] [PATCH 1/2] package/hdparm: Fix sha256 tarball hash In-Reply-To: <20221002143354.1909295-1-bernd.kuhls@t-online.de> (Bernd Kuhls's message of "Sun, 2 Oct 2022 16:33:53 +0200") References: <20221002143354.1909295-1-bernd.kuhls@t-online.de> Message-ID: <87fsf4uz2w.fsf@dell.be.48ers.dk> >>>>> "Bernd" == Bernd Kuhls writes: > Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb > Signed-off-by: Bernd Kuhls Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From peter at korsgaard.com Mon Oct 31 09:22:16 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:16 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/hdparm: Fix sha256 tarball hash Message-ID: <20221031092328.396DA87751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=cc9bc36a7104b2a284d2f86dd3ffcc5beb317b40 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard (cherry picked from commit 25f45d54aa0936bac685cb96bf81165d461284f3) Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Mon Oct 31 09:21:25 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:21:25 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/uclibc-ng-test: update to latest git Message-ID: <20221031092328.301588774F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d187a8c2e9fe7f95833669e2a784409bf296cf0d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard (cherry picked from commit 616347a163a940f78300d980353e831a39095f3c) Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index ea5f224219..ba380ddedf 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Mon Oct 31 09:22:35 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:22:35 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/hdparm: Fix sha256 tarball hash Message-ID: <20221031092441.64FD087751@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b43704ad9869d98b57ae5883044f08951d9d1f53 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Forgotten in commit b50ab233e6e1737cb3aa198fdebb5d9fb5cd89eb Signed-off-by: Bernd Kuhls Signed-off-by: Peter Korsgaard (cherry picked from commit 25f45d54aa0936bac685cb96bf81165d461284f3) Signed-off-by: Peter Korsgaard --- package/hdparm/hdparm.hash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/hdparm/hdparm.hash b/package/hdparm/hdparm.hash index c039481f77..b86afc7cfe 100644 --- a/package/hdparm/hdparm.hash +++ b/package/hdparm/hdparm.hash @@ -1,5 +1,5 @@ # From https://sourceforge.net/projects/hdparm/files/hdparm/ sha1 c8e24233b4d29506907ad2bf0725f793106c3a78 hdparm-9.63.tar.gz # Locally computed -sha256 2c0f9d75cdbeda928a25a128cd3d0b7120445ec0910c0b29d4c1038ed1be777f hdparm-9.62.tar.gz +sha256 70785deaebba5877a89c123568b41dee990da55fc51420f13f609a1072899691 hdparm-9.63.tar.gz sha256 eae572b06d2733f5c65fbe81680ce2b8a109afee2bdd1a161343c772af0e82e1 LICENSE.TXT From peter at korsgaard.com Mon Oct 31 09:20:59 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:20:59 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/uclibc-ng-test: update to latest git Message-ID: <20221031092441.5AD5D8371C@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d0f071e3731b4c94f8c2c7d190e9eac101ed0e07 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Fixes a musl autobuild compile error, see http://autobuild.buildroot.net/results/3cbd6f8007d1b5276b91e9f1688402f86b1f2049/ Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard (cherry picked from commit 616347a163a940f78300d980353e831a39095f3c) Signed-off-by: Peter Korsgaard --- package/uclibc-ng-test/uclibc-ng-test.hash | 2 +- package/uclibc-ng-test/uclibc-ng-test.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/uclibc-ng-test/uclibc-ng-test.hash b/package/uclibc-ng-test/uclibc-ng-test.hash index 37660b04c3..4028bada4c 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.hash +++ b/package/uclibc-ng-test/uclibc-ng-test.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 f731307c0547ce4bbd3f5025972f64e9b22208a147e34e5745000b54d4d3aa98 uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a-br1.tar.gz +sha256 655c9d9732cf24d8230defac7ef4d6bd92ad05c070ab02fe99c1fb47c7a40039 uclibc-ng-test-6790eafe897b3a8c19a2caf50a5ecccf06647adf-br1.tar.gz sha256 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3 COPYING.LIB diff --git a/package/uclibc-ng-test/uclibc-ng-test.mk b/package/uclibc-ng-test/uclibc-ng-test.mk index 6a658b4293..a678bcf7f0 100644 --- a/package/uclibc-ng-test/uclibc-ng-test.mk +++ b/package/uclibc-ng-test/uclibc-ng-test.mk @@ -4,7 +4,7 @@ # ################################################################################ -UCLIBC_NG_TEST_VERSION = 0844445e7358eb10e716155b55b0fb23e88d644a +UCLIBC_NG_TEST_VERSION = 6790eafe897b3a8c19a2caf50a5ecccf06647adf UCLIBC_NG_TEST_SITE = git://uclibc-ng.org/git/uclibc-ng-test UCLIBC_NG_TEST_LICENSE = LGPL-2.1+ UCLIBC_NG_TEST_LICENSE_FILES = COPYING.LIB From peter at korsgaard.com Mon Oct 31 09:30:02 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:30:02 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221031093031.88EF78776E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e2a9134bc76cadf5353c9f702ca813a2026823a7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x Signed-off-by: Peter Korsgaard (cherry picked from commit 716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6) {Peter: drop 6.0.x bump] Signed-off-by: Peter Korsgaard --- linux/Config.in | 2 +- linux/linux.hash | 12 ++++++------ package/linux-headers/Config.in.host | 12 ++++++------ 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/linux/Config.in b/linux/Config.in index 4be34dd7eb..733f57c4a4 100644 --- a/linux/Config.in +++ b/linux/Config.in @@ -128,7 +128,7 @@ endif config BR2_LINUX_KERNEL_VERSION string - default "5.15.67" if BR2_LINUX_KERNEL_LATEST_VERSION + default "5.15.73" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.115-cip7" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.109-cip5-rt4" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \ diff --git a/linux/linux.hash b/linux/linux.hash index 4d87543bbb..ec28403f36 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,13 +1,13 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 d8060dc88f862baaae66b42a2dbc12298ed667c698eb5c55617a7786ee47bf25 linux-5.16.20.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc sha256 35017bb40b604e0b577fc2b87e727632b46608a2ba3a4f5858b9177f58f376b3 linux-4.4.302.tar.xz -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index c256e3bca1..dc5eeeb38b 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -382,12 +382,12 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string default "4.4.302" if BR2_KERNEL_HEADERS_4_4 - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 default "5.16.20" if BR2_KERNEL_HEADERS_5_16 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL From peter at korsgaard.com Mon Oct 31 09:26:36 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:26:36 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] {linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.{4, 10, 15}.x / 6.0.x series Message-ID: <20221031093045.821FC8776E@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=219b4a626c39dd7c08f314f9df9cafa9f3054b05 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x Signed-off-by: Peter Korsgaard (cherry picked from commit 716b8c4e7bac4f39b7a2297f39858f5c4bfbcab6) [Peter: drop 6.0.x bump] Signed-off-by: Peter Korsgaard --- linux/linux.hash | 12 ++++++------ package/linux-headers/Config.in.host | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/linux/linux.hash b/linux/linux.hash index a1b7984489..68cf42bbbf 100644 --- a/linux/linux.hash +++ b/linux/linux.hash @@ -1,12 +1,12 @@ # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 4a1c922a490eeabf5b44d4fde36de9ba5b71711b7352c6258716da41160db628 linux-5.17.15.tar.xz -sha256 da47d9a80b694548835ccb553b6eb1a1f3f5d5cddd9e2bd6f4886b99ca14f940 linux-5.15.67.tar.xz -sha256 3f47ebdb9afe152a0c32c1157336ef13fa5cc08ac6d884dfc1f6ddc2b7dba268 linux-5.10.142.tar.xz -sha256 09c72e3dd85df773eb52e53e25c556d132958bd775b0ed6985a6b1ac21c9cfc2 linux-5.4.212.tar.xz +sha256 a822f09525ae8803453939a91e73f18097a3ba2aec73be4fe9ab314a0131715d linux-5.15.73.tar.xz +sha256 85253abf097eb5013b988a400eb022eed0e0626e7e0a7daa3ab4b6bcabbced9a linux-5.10.147.tar.xz +sha256 2bb826cdf9b2cfce385fb5d51fc8070fe428e467bd3df4ae2a7eb6f0c0cc2e63 linux-5.4.217.tar.xz # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc -sha256 2283c1af5373c43e79adca6987174d932989a8b2551405e83e2e39ebe31e06d2 linux-4.9.327.tar.xz -sha256 70f4df21901a654632ebbb533884ccaf117a29b14e6f2b672f0c36613c3e897d linux-4.14.292.tar.xz -sha256 eadd13aa70f37cdf50eef45c5964bd7146d353b61a1fd026d4fa0b2a68a3ea47 linux-4.19.257.tar.xz +sha256 bf021936a450e9292e10cc7db9909cd0d336406191d22aadd22bdcc51ca2595f linux-4.9.330.tar.xz +sha256 62ccb9ba94a7da5115bc923eebf8dffee9229801da02be87d90ae68ab9a76a6b linux-4.14.295.tar.xz +sha256 bec33298bd0470b5e725c7dc29a2dd4daf02065cb01cd4a54f6adee6ff582cb2 linux-4.19.261.tar.xz # Locally computed sha256 f3559be277be9200897022282be18cfc0278d1d8baec8058305b04b9cd72002a linux-cip-5.10.115-cip7.tar.gz sha256 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3 linux-cip-5.10.109-cip5-rt4.tar.gz diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index ab59bdd368..3ec26f532d 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -376,12 +376,12 @@ endchoice config BR2_DEFAULT_KERNEL_HEADERS string - default "4.9.327" if BR2_KERNEL_HEADERS_4_9 - default "4.14.292" if BR2_KERNEL_HEADERS_4_14 - default "4.19.257" if BR2_KERNEL_HEADERS_4_19 - default "5.4.212" if BR2_KERNEL_HEADERS_5_4 - default "5.10.142" if BR2_KERNEL_HEADERS_5_10 - default "5.15.67" if BR2_KERNEL_HEADERS_5_15 + default "4.9.330" if BR2_KERNEL_HEADERS_4_9 + default "4.14.295" if BR2_KERNEL_HEADERS_4_14 + default "4.19.261" if BR2_KERNEL_HEADERS_4_19 + default "5.4.217" if BR2_KERNEL_HEADERS_5_4 + default "5.10.147" if BR2_KERNEL_HEADERS_5_10 + default "5.15.73" if BR2_KERNEL_HEADERS_5_15 default "5.17.15" if BR2_KERNEL_HEADERS_5_17 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL From yann.morin.1998 at free.fr Mon Oct 31 09:46:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:46:13 +0100 Subject: [Buildroot] [git commit] DEVELOPERS: add myself for package/libkcapi Message-ID: <20221031094635.DDA778777A@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=68df37aeb47671bc5931d5539e1f5bc04777fab9 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add myself to help maintaining package/libkcapi. Signed-off-by: Tan En De Signed-off-by: Yann E. MORIN --- DEVELOPERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 1380ae6a98..82776cc14d 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2784,6 +2784,9 @@ F: package/most/ N: TIAN Yuanhao F: package/open-isns/ +N: Tan En De +F: package/libkcapi/ + N: Theo Debrouwere F: board/beagleboardx15/ F: configs/beagleboardx15_defconfig From yann.morin.1998 at free.fr Mon Oct 31 09:48:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:48:55 +0100 Subject: [Buildroot] [1/1] DEVELOPERS: add myself for package/libkcapi In-Reply-To: <20221031082841.2781656-1-ende.tan@starfivetech.com> References: <20221031082841.2781656-1-ende.tan@starfivetech.com> Message-ID: <20221031094855.GM1058960@scaer> Tan, All, On 2022-10-31 16:28 +0800, Tan En De spake thusly: > Add myself to help maintaining package/libkcapi. > > Signed-off-by: Tan En De Applied to master, thanks. Regards, Yann E. MORIN. > --- > As mentioned in the reply: > https://lore.kernel.org/all/20221030114529.607f4e73 at windsurf/ > Notice that I'm using ende.tan at starfivetech.com instead of > ende.tan at linux.starfivetech.com because my company has changed SMTP > server (the latter is still accessible). > --- > DEVELOPERS | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/DEVELOPERS b/DEVELOPERS > index c4d23cd293..90c28b375e 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2775,6 +2775,9 @@ F: package/most/ > N: TIAN Yuanhao > F: package/open-isns/ > > +N: Tan En De > +F: package/libkcapi/ > + > N: Theo Debrouwere > F: board/beagleboardx15/ > F: configs/beagleboardx15_defconfig > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:50:36 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:36 +0100 Subject: [Buildroot] [git commit] package/intel-mediasdk: bump version to 22.6.0 Message-ID: <20221031095715.C010287864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=c46ba02f29593247538a2c4d7e827662e2e93864 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/intel-mediasdk/intel-mediasdk.hash | 2 +- package/intel-mediasdk/intel-mediasdk.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediasdk/intel-mediasdk.hash b/package/intel-mediasdk/intel-mediasdk.hash index 25894aea63..da4286ae23 100644 --- a/package/intel-mediasdk/intel-mediasdk.hash +++ b/package/intel-mediasdk/intel-mediasdk.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0eb04409a226da6e752576d60c46a3ec969ddfe03042897088367392207c7ab3 intel-mediasdk-22.5.4.tar.gz +sha256 21a54b752c6b84f032b53a3e328d29f05a448b39f4c18f75fe4e79bb219dc40e intel-mediasdk-22.6.0.tar.gz sha256 dfd67773578903698f9ff4a61eb8f2d84810cbecd56f3f3cee8c649f813b6ea6 LICENSE diff --git a/package/intel-mediasdk/intel-mediasdk.mk b/package/intel-mediasdk/intel-mediasdk.mk index 4080188dc5..30fddfbcfd 100644 --- a/package/intel-mediasdk/intel-mediasdk.mk +++ b/package/intel-mediasdk/intel-mediasdk.mk @@ -4,7 +4,7 @@ # ################################################################################ -INTEL_MEDIASDK_VERSION = 22.5.4 +INTEL_MEDIASDK_VERSION = 22.6.0 INTEL_MEDIASDK_SITE = https://github.com/Intel-Media-SDK/MediaSDK/archive INTEL_MEDIASDK_LICENSE = MIT INTEL_MEDIASDK_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:41 +0100 Subject: [Buildroot] [git commit] package/motion: bump to version 4.5.0 Message-ID: <20221031095715.D767787844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27a4b1a967b1efbb8339aa198ac242063fd641e5 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/motion/motion.hash | 2 +- package/motion/motion.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/motion/motion.hash b/package/motion/motion.hash index 085ac90449..9b99256864 100644 --- a/package/motion/motion.hash +++ b/package/motion/motion.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE diff --git a/package/motion/motion.mk b/package/motion/motion.mk index 5d54ecea01..18fe0eb630 100644 --- a/package/motion/motion.mk +++ b/package/motion/motion.mk @@ -4,7 +4,7 @@ # ################################################################################ -MOTION_VERSION = 4.4.0 +MOTION_VERSION = 4.5.0 MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) MOTION_LICENSE = GPL-2.0 MOTION_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:34 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:34 +0100 Subject: [Buildroot] [git commit] package/intel-mediadriver: bump version to 22.6.0 Message-ID: <20221031095715.B55CA87847@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d30de3f1e17bcd25509b48f6e4aa0be69de8bd19 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/intel-mediadriver/intel-mediadriver.hash | 2 +- package/intel-mediadriver/intel-mediadriver.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash index 35e4c97c7c..d1698cbfb5 100644 --- a/package/intel-mediadriver/intel-mediadriver.hash +++ b/package/intel-mediadriver/intel-mediadriver.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk index d0c1213965..d1a9ca7789 100644 --- a/package/intel-mediadriver/intel-mediadriver.mk +++ b/package/intel-mediadriver/intel-mediadriver.mk @@ -6,7 +6,7 @@ # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack -INTEL_MEDIADRIVER_VERSION = 22.5.4 +INTEL_MEDIADRIVER_VERSION = 22.6.0 INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause From yann.morin.1998 at free.fr Mon Oct 31 09:50:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:32 +0100 Subject: [Buildroot] [git commit] package/flac: bump version to 1.4.2 Message-ID: <20221031095715.A98E987844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=5a172ef532b6e27eab501af6ae82b26ab912e48a branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Changelog: https://xiph.org/flac/changelog.html Switched _SITE to https and update project URL. Upstream removed the dependency to host-nasm: https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/flac/Config.in | 2 +- package/flac/flac.hash | 4 ++-- package/flac/flac.mk | 11 ++--------- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/package/flac/Config.in b/package/flac/Config.in index 267acb7f34..62aca290fe 100644 --- a/package/flac/Config.in +++ b/package/flac/Config.in @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC help FLAC is an Open Source lossless audio codec. - http://flac.sourceforge.net/ + https://xiph.org/flac/ comment "flac needs a toolchain w/ wchar" depends on !BR2_USE_WCHAR diff --git a/package/flac/flac.hash b/package/flac/flac.hash index 1f7763fd6e..b993ebd759 100644 --- a/package/flac/flac.hash +++ b/package/flac/flac.hash @@ -1,5 +1,5 @@ -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz # Locally computed sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL diff --git a/package/flac/flac.mk b/package/flac/flac.mk index 91d5840d72..ebb4778521 100644 --- a/package/flac/flac.mk +++ b/package/flac/flac.mk @@ -4,8 +4,8 @@ # ################################################################################ -FLAC_VERSION = 1.4.0 -FLAC_SITE = http://downloads.xiph.org/releases/flac +FLAC_VERSION = 1.4.2 +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz FLAC_INSTALL_STAGING = YES FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) @@ -27,11 +27,4 @@ else FLAC_CONF_OPTS += --disable-ogg endif -ifeq ($(BR2_X86_CPU_HAS_SSE),y) -FLAC_DEPENDENCIES += host-nasm -FLAC_CONF_OPTS += --enable-sse -else -FLAC_CONF_OPTS += --disable-sse -endif - $(eval $(autotools-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:45 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:45 +0100 Subject: [Buildroot] [git commit] package/arp-scan: bump to version 1.9.8 Message-ID: <20221031095715.ED47887864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fb35e5f032d714f80f058fc410f38a0361c4a3b1 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Update hash of COPYING (gnu.org license file used since https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/arp-scan/arp-scan.hash | 4 ++-- package/arp-scan/arp-scan.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash index dd97333013..b18c6ceb38 100644 --- a/package/arp-scan/arp-scan.hash +++ b/package/arp-scan/arp-scan.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk index 3fdbd463c2..73d1b99bc7 100644 --- a/package/arp-scan/arp-scan.mk +++ b/package/arp-scan/arp-scan.mk @@ -4,7 +4,7 @@ # ################################################################################ -ARP_SCAN_VERSION = 1.9.7 +ARP_SCAN_VERSION = 1.9.8 ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) ARP_SCAN_LICENSE = GPL-3.0+ ARP_SCAN_LICENSE_FILES = COPYING From yann.morin.1998 at free.fr Mon Oct 31 09:50:50 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:50 +0100 Subject: [Buildroot] [git commit] package/exfatprogs: drop host-pkgconf dependency Message-ID: <20221031095716.0EE2287844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=11ff62234ab139296ead705869c44c0a233682da branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master host-pkgconf is not a dependency since bump to version 1.0.3 in commit fbad745139125ea0995a436fd81ce7ea233638c0 and https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/exfatprogs/exfatprogs.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 2911d21f4f..44679c7d60 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ EXFATPROGS_LICENSE_FILES = COPYING -EXFATPROGS_DEPENDENCIES = host-pkgconf -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf $(eval $(autotools-package)) $(eval $(host-autotools-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:38 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:38 +0100 Subject: [Buildroot] [git commit] package/python-pillow: bump to version 9.3.0 Message-ID: <20221031095715.CB4BC87865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e919528e64c6a8a08c47b83653b0d6f2e8f8437e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Yann E. MORIN --- package/python-pillow/python-pillow.hash | 4 ++-- package/python-pillow/python-pillow.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash index 0e407bd55c..46da25dddc 100644 --- a/package/python-pillow/python-pillow.hash +++ b/package/python-pillow/python-pillow.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/pillow/json -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz # Locally computed sha256 checksums sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk index 31725a3e46..5ea9fcf264 100644 --- a/package/python-pillow/python-pillow.mk +++ b/package/python-pillow/python-pillow.mk @@ -4,8 +4,8 @@ # ################################################################################ -PYTHON_PILLOW_VERSION = 9.2.0 -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed +PYTHON_PILLOW_VERSION = 9.3.0 +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz PYTHON_PILLOW_LICENSE = HPND PYTHON_PILLOW_LICENSE_FILES = LICENSE From yann.morin.1998 at free.fr Mon Oct 31 09:50:57 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:57 +0100 Subject: [Buildroot] [git commit] package/igmpproxy: bump to version 0.4 Message-ID: <20221031095716.2FF4687844@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fbaaab0fb5851b029ca461eb387ff6c48f6c49cd branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/pali/igmpproxy/releases/tag/0.4 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/igmpproxy/igmpproxy.hash | 2 +- package/igmpproxy/igmpproxy.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash index 238de67e88..a7e1a065d9 100644 --- a/package/igmpproxy/igmpproxy.hash +++ b/package/igmpproxy/igmpproxy.hash @@ -1,5 +1,5 @@ # Locally computed: -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk index 6a6b56afa0..357c9087e0 100644 --- a/package/igmpproxy/igmpproxy.mk +++ b/package/igmpproxy/igmpproxy.mk @@ -4,7 +4,7 @@ # ################################################################################ -IGMPPROXY_VERSION = 0.3 +IGMPPROXY_VERSION = 0.4 IGMPPROXY_SITE = \ https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) IGMPPROXY_AUTORECONF = YES From yann.morin.1998 at free.fr Mon Oct 31 09:50:43 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:43 +0100 Subject: [Buildroot] [git commit] package/exim: fix typo in comment Message-ID: <20221031095715.E2DE687847@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=55ef42e090b39fdf129b7e5e218019e0156fe166 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/exim/exim.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/exim/exim.mk b/package/exim/exim.mk index e0fcd83fb0..9c54eeec44 100644 --- a/package/exim/exim.mk +++ b/package/exim/exim.mk @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value $(@D)/Local/Makefile endef -# Comment-out a variable. Has no effect if it does not exits. +# Comment-out a variable. Has no effect if it does not exist. define exim-config-unset # variable-name $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ $(@D)/Local/Makefile From yann.morin.1998 at free.fr Mon Oct 31 09:50:55 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:55 +0100 Subject: [Buildroot] [git commit] package/cups-pk-helper: bump to version 0.2.7 Message-ID: <20221031095716.24DB387864@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=69ee6fdef440ff69ec174e69b5b0ca214f6c2ee7 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to meson-package https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/cups-pk-helper/cups-pk-helper.hash | 3 ++- package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash index 18fe789389..75c5a5ffda 100644 --- a/package/cups-pk-helper/cups-pk-helper.hash +++ b/package/cups-pk-helper/cups-pk-helper.hash @@ -1,3 +1,4 @@ +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz # Locally computed: -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk index c688743160..2bd00c6912 100644 --- a/package/cups-pk-helper/cups-pk-helper.mk +++ b/package/cups-pk-helper/cups-pk-helper.mk @@ -4,7 +4,7 @@ # ################################################################################ -CUPS_PK_HELPER_VERSION = 0.2.6 +CUPS_PK_HELPER_VERSION = 0.2.7 CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz CUPS_PK_HELPER_LICENSE = GPL-2.0+ @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit -$(eval $(autotools-package)) +$(eval $(meson-package)) From yann.morin.1998 at free.fr Mon Oct 31 09:50:52 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:52 +0100 Subject: [Buildroot] [git commit] package/exfatprogs: bump to version 1.2.0 Message-ID: <20221031095716.19D5287773@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=35a6c9cb0dc7f9f7015ecedb9761b1d63a8a587d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/exfatprogs/exfatprogs/releases/tag/1.2.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/exfatprogs/exfatprogs.hash | 4 ++-- package/exfatprogs/exfatprogs.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/exfatprogs/exfatprogs.hash b/package/exfatprogs/exfatprogs.hash index 99f57c9deb..49135b1da7 100644 --- a/package/exfatprogs/exfatprogs.hash +++ b/package/exfatprogs/exfatprogs.hash @@ -1,5 +1,5 @@ -# From https://github.com/exfatprogs/exfatprogs/releases/download/1.1.3/exfatprogs-1.1.3.tar.xz.sha256 -sha256 3dbd74b60eec18d2c68d57be4a872d7baa4f7d848e669e31159452ef5245b809 exfatprogs-1.1.3.tar.xz +# From https://github.com/exfatprogs/exfatprogs/releases/download/1.2.0/exfatprogs-1.2.0.tar.xz.sha256 +sha256 56d9a49465deafc367d428afc71c8098705a30ee19a3cdf3c5320650b8880742 exfatprogs-1.2.0.tar.xz # Hash for license file sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk index 44679c7d60..d755c7a214 100644 --- a/package/exfatprogs/exfatprogs.mk +++ b/package/exfatprogs/exfatprogs.mk @@ -4,7 +4,7 @@ # ################################################################################ -EXFATPROGS_VERSION = 1.1.3 +EXFATPROGS_VERSION = 1.2.0 EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) EXFATPROGS_LICENSE = GPL-2.0+ From yann.morin.1998 at free.fr Mon Oct 31 09:50:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:59 +0100 Subject: [Buildroot] [git commit] package/log4cxx: bump to version 0.13.0 Message-ID: <20221031095716.3A60687865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b8098ff155958374f6791f81479684bac711ab03 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch which was merged: https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 and updated: https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- ...ack-only-check-for-boost-if-really-needed.patch | 36 ---------------------- package/log4cxx/log4cxx.hash | 4 +-- package/log4cxx/log4cxx.mk | 2 +- 3 files changed, 3 insertions(+), 39 deletions(-) diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch deleted file mode 100644 index 7df29ea120..0000000000 --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 -From: Peter Seiderer -Date: Fri, 28 Jan 2022 13:11:01 +0100 -Subject: [PATCH] boost-fallback: only check for boost if really needed - -- only check for boost if really needed (in case of legacy c++ standard < c++17) - -Signed-off-by: Peter Seiderer ---- - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake -index 8285b0b9..0ecf8c6c 100644 ---- a/src/cmake/boost-fallback/boost-fallback.cmake -+++ b/src/cmake/boost-fallback/boost-fallback.cmake -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") - -+# search for boost only in case needed for legacy c++ standard < c++17 -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) - find_package(Boost COMPONENTS thread) - if( ${Boost_FOUND} ) - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") - endif( ${Boost_FOUND} ) -+endif() - - # Link the target with the appropriate boost libraries(if required) - function(boostfallback_link target) --- -2.34.1 - diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash index 12633c8e57..8190f94aa3 100644 --- a/package/log4cxx/log4cxx.hash +++ b/package/log4cxx/log4cxx.hash @@ -1,4 +1,4 @@ -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz # Locally computed sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk index d20cc792a6..f50267d737 100644 --- a/package/log4cxx/log4cxx.mk +++ b/package/log4cxx/log4cxx.mk @@ -4,7 +4,7 @@ # ################################################################################ -LOG4CXX_VERSION = 0.12.1 +LOG4CXX_VERSION = 0.13.0 LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz LOG4CXX_INSTALL_STAGING = YES From yann.morin.1998 at free.fr Mon Oct 31 09:50:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:50:48 +0100 Subject: [Buildroot] [git commit] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 Message-ID: <20221031095716.04C4F87865@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9d136e5cc950ab3ab29ec13e430fc78291634d96 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - libuv Release notes: https://github.com/libuv/libuv/issues/3452 https://github.com/libuv/libuv/issues/3522 https://github.com/libuv/libuv/issues/3586 Updated license hash due to various commits regarding Android/Windows. - uvw: Updated license hash due to copyright year bump: https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 Signed-off-by: Bernd Kuhls Signed-off-by: Yann E. MORIN --- package/libuv/libuv.hash | 4 ++-- package/libuv/libuv.mk | 2 +- package/uvw/uvw.hash | 4 ++-- package/uvw/uvw.mk | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash index 1874aa344c..b0fa0ff5be 100644 --- a/package/libuv/libuv.hash +++ b/package/libuv/libuv.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk index ed51fc92f9..c169b76a6a 100644 --- a/package/libuv/libuv.mk +++ b/package/libuv/libuv.mk @@ -6,7 +6,7 @@ # When bumping libuv, check if a new version of uvw is available # and bump it too. -LIBUV_VERSION = 1.43.0 +LIBUV_VERSION = 1.44.2 LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) LIBUV_DEPENDENCIES = host-pkgconf LIBUV_INSTALL_STAGING = YES diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash index 564c0980f3..a0c74bbe05 100644 --- a/package/uvw/uvw.hash +++ b/package/uvw/uvw.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk index 161c40849d..b6c2135d6f 100644 --- a/package/uvw/uvw.mk +++ b/package/uvw/uvw.mk @@ -4,7 +4,7 @@ # ################################################################################ -UVW_VERSION = 2.11.0_libuv_v1.43 +UVW_VERSION = 2.12.1_libuv_v1.44 UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) UVW_INSTALL_STAGING = YES UVW_INSTALL_TARGET = NO From yann.morin.1998 at free.fr Mon Oct 31 09:57:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:57:58 +0100 Subject: [Buildroot] [PATCH 1/1] package/msmtp: security bump to version 1.8.22 In-Reply-To: <20221030224328.684577-1-fontaine.fabrice@gmail.com> References: <20221030224328.684577-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095758.GN1058960@scaer> Fabrice, All, On 2022-10-30 23:43 +0100, Fabrice Fontaine spake thusly: > - Fixed a security problem in msmtpd: mail addresses starting with '-' could be > interpreted as options of the pipe command. > > https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/msmtp/msmtp.hash | 4 ++-- > package/msmtp/msmtp.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash > index 1e73d92470..c5571f2fb3 100644 > --- a/package/msmtp/msmtp.hash > +++ b/package/msmtp/msmtp.hash > @@ -1,7 +1,7 @@ > # Locally calculated after checking signature > -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig > +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig > # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 > -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz > +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz > > # Hash for license file: > sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING > diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk > index 3db36f4cd0..c3928ffcbb 100644 > --- a/package/msmtp/msmtp.mk > +++ b/package/msmtp/msmtp.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MSMTP_VERSION = 1.8.14 > +MSMTP_VERSION = 1.8.22 > MSMTP_SITE = https://marlam.de/msmtp/releases > MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz > MSMTP_DEPENDENCIES = host-pkgconf > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:58:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:15 +0100 Subject: [Buildroot] [PATCH 1/1] package/log4cxx: bump to version 0.13.0 In-Reply-To: <20221030223440.678755-1-fontaine.fabrice@gmail.com> References: <20221030223440.678755-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095815.GO1058960@scaer> Fabrice, All, On 2022-10-30 23:34 +0100, Fabrice Fontaine spake thusly: > Drop patch which was merged: > https://github.com/apache/logging-log4cxx/commit/5240a3db1ba10e657b29c67ae8330f3a5b3d8774 > and updated: > https://github.com/apache/logging-log4cxx/commit/b7284609ae0b6ae3798b19d3920480c4d7e670ba > > https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.13.0 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > ...nly-check-for-boost-if-really-needed.patch | 36 ------------------- > package/log4cxx/log4cxx.hash | 4 +-- > package/log4cxx/log4cxx.mk | 2 +- > 3 files changed, 3 insertions(+), 39 deletions(-) > delete mode 100644 package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > > diff --git a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch b/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > deleted file mode 100644 > index 7df29ea120..0000000000 > --- a/package/log4cxx/0001-boost-fallback-only-check-for-boost-if-really-needed.patch > +++ /dev/null > @@ -1,36 +0,0 @@ > -From 24e7adc8d67b3c8f7d275b4f9a7e70a61b73fcd4 Mon Sep 17 00:00:00 2001 > -From: Peter Seiderer > -Date: Fri, 28 Jan 2022 13:11:01 +0100 > -Subject: [PATCH] boost-fallback: only check for boost if really needed > - > -- only check for boost if really needed (in case of legacy c++ standard < c++17) > - > -Signed-off-by: Peter Seiderer > ---- > - src/cmake/boost-fallback/boost-fallback.cmake | 3 +++ > - 1 file changed, 3 insertions(+) > - > -diff --git a/src/cmake/boost-fallback/boost-fallback.cmake b/src/cmake/boost-fallback/boost-fallback.cmake > -index 8285b0b9..0ecf8c6c 100644 > ---- a/src/cmake/boost-fallback/boost-fallback.cmake > -+++ b/src/cmake/boost-fallback/boost-fallback.cmake > -@@ -55,6 +55,8 @@ try_compile(STD_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tes > - try_compile(STD_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > - "${CMAKE_CURRENT_LIST_DIR}/test-stdatomic.cpp") > - > -+# search for boost only in case needed for legacy c++ standard < c++17 > -+if(NOT ${STD_THREAD_FOUND} OR NOT ${STD_MUTEX_FOUND} OR NOT ${STD_SHARED_MUTEX_FOUND} OR NOT ${STD_SHARED_PTR_FOUND} OR NOT ${STD_ATOMIC_FOUND}) > - find_package(Boost COMPONENTS thread) > - if( ${Boost_FOUND} ) > - try_compile(Boost_SHARED_PTR_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > -@@ -67,6 +69,7 @@ if( ${Boost_FOUND} ) > - try_compile(Boost_ATOMIC_FOUND "${CMAKE_BINARY_DIR}/boost-fallback-compile-tests" > - "${CMAKE_CURRENT_LIST_DIR}/test-boostatomic.cpp") > - endif( ${Boost_FOUND} ) > -+endif() > - > - # Link the target with the appropriate boost libraries(if required) > - function(boostfallback_link target) > --- > -2.34.1 > - > diff --git a/package/log4cxx/log4cxx.hash b/package/log4cxx/log4cxx.hash > index 12633c8e57..8190f94aa3 100644 > --- a/package/log4cxx/log4cxx.hash > +++ b/package/log4cxx/log4cxx.hash > @@ -1,4 +1,4 @@ > -# From https://www.apache.org/dist/logging/log4cxx/0.12.1/apache-log4cxx-0.12.1.tar.gz.sha512 > -sha512 807058734cebf7c92e99484313becbc6be63e48bd930889c733318bb78dfec498b66aaa12255ed30879abb005b32e2b965f9dd87ec50d0421ca067f3f66280d9 apache-log4cxx-0.12.1.tar.gz > +# From https://www.apache.org/dist/logging/log4cxx/0.13.0/apache-log4cxx-0.13.0.tar.gz.sha512 > +sha512 2a5f4fecc0415d942658c588774f0666082c497b6fd49bf64ab3328a997775206788c9b10a8c89208896c57da52fcc12c18d5d11ca1d3bf699e4633b8fcea6e5 apache-log4cxx-0.13.0.tar.gz > # Locally computed > sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE > diff --git a/package/log4cxx/log4cxx.mk b/package/log4cxx/log4cxx.mk > index d20cc792a6..f50267d737 100644 > --- a/package/log4cxx/log4cxx.mk > +++ b/package/log4cxx/log4cxx.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -LOG4CXX_VERSION = 0.12.1 > +LOG4CXX_VERSION = 0.13.0 > LOG4CXX_SITE = https://archive.apache.org/dist/logging/log4cxx/$(LOG4CXX_VERSION) > LOG4CXX_SOURCE = apache-log4cxx-$(LOG4CXX_VERSION).tar.gz > LOG4CXX_INSTALL_STAGING = YES > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:58:32 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:32 +0100 Subject: [Buildroot] [PATCH 1/1] package/igmpproxy: bump to version 0.4 In-Reply-To: <20221030221121.474743-1-fontaine.fabrice@gmail.com> References: <20221030221121.474743-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095832.GP1058960@scaer> Fabrice, All, On 2022-10-30 23:11 +0100, Fabrice Fontaine spake thusly: > https://github.com/pali/igmpproxy/releases/tag/0.4 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/igmpproxy/igmpproxy.hash | 2 +- > package/igmpproxy/igmpproxy.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/igmpproxy/igmpproxy.hash b/package/igmpproxy/igmpproxy.hash > index 238de67e88..a7e1a065d9 100644 > --- a/package/igmpproxy/igmpproxy.hash > +++ b/package/igmpproxy/igmpproxy.hash > @@ -1,5 +1,5 @@ > # Locally computed: > -sha256 d1fc244cb2fbbf99f720bda3e841fe59ece9b6919073790b4b892739b1b844eb igmpproxy-0.3.tar.gz > +sha256 afa4b75a823b82f71ce99f33eae4e8136b906ae8a5ede5caaad93bac38cdae24 igmpproxy-0.4.tar.gz > sha256 be3d05af93dbbc4650f8d641d8e1bec220af4a729e07ba71e949c25b93a1b4f6 COPYING > sha256 c4f65d5d396ad518a37d30b83fe33897661858dc174ff64a15d0461630ce64e4 GPL.txt > sha256 4328a21f0822caa9976356623118bcdcc9970c7a0f9a3deeba23c779b7cfb5d1 Stanford.txt > diff --git a/package/igmpproxy/igmpproxy.mk b/package/igmpproxy/igmpproxy.mk > index 6a6b56afa0..357c9087e0 100644 > --- a/package/igmpproxy/igmpproxy.mk > +++ b/package/igmpproxy/igmpproxy.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -IGMPPROXY_VERSION = 0.3 > +IGMPPROXY_VERSION = 0.4 > IGMPPROXY_SITE = \ > https://github.com/pali/igmpproxy/releases/download/$(IGMPPROXY_VERSION) > IGMPPROXY_AUTORECONF = YES > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:57:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:57:23 +0100 Subject: [Buildroot] [git commit] package/msmtp: security bump to version 1.8.22 Message-ID: <20221031095851.3031F8786B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9a294be424a4f78e1a54e3df7a706181fa287793 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master - Fixed a security problem in msmtpd: mail addresses starting with '-' could be interpreted as options of the pipe command. https://github.com/marlam/msmtp-mirror/blob/msmtp-1.8.22/NEWS Signed-off-by: Fabrice Fontaine Signed-off-by: Yann E. MORIN --- package/msmtp/msmtp.hash | 4 ++-- package/msmtp/msmtp.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/msmtp/msmtp.hash b/package/msmtp/msmtp.hash index 1e73d92470..c5571f2fb3 100644 --- a/package/msmtp/msmtp.hash +++ b/package/msmtp/msmtp.hash @@ -1,7 +1,7 @@ # Locally calculated after checking signature -# https://marlam.de/msmtp/releases/msmtp-1.8.14.tar.xz.sig +# https://marlam.de/msmtp/releases/msmtp-1.8.22.tar.xz.sig # with key 2F61B4828BBA779AECB3F32703A2A4AB1E32FD34 -sha256 d56f065d711486e9c234618515a02a48a48dab4051b34f3e108fbecb6fb773b4 msmtp-1.8.14.tar.xz +sha256 1b04206286a5b82622335e4eb09e17074368b7288e53d134543cbbc6b79ea3e7 msmtp-1.8.22.tar.xz # Hash for license file: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/package/msmtp/msmtp.mk b/package/msmtp/msmtp.mk index 3db36f4cd0..c3928ffcbb 100644 --- a/package/msmtp/msmtp.mk +++ b/package/msmtp/msmtp.mk @@ -4,7 +4,7 @@ # ################################################################################ -MSMTP_VERSION = 1.8.14 +MSMTP_VERSION = 1.8.22 MSMTP_SITE = https://marlam.de/msmtp/releases MSMTP_SOURCE = msmtp-$(MSMTP_VERSION).tar.xz MSMTP_DEPENDENCIES = host-pkgconf From yann.morin.1998 at free.fr Mon Oct 31 09:58:48 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:58:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/cups-pk-helper: bump to version 0.2.7 In-Reply-To: <20221030215201.463000-1-fontaine.fabrice@gmail.com> References: <20221030215201.463000-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095848.GQ1058960@scaer> Fabrice, All, On 2022-10-30 22:52 +0100, Fabrice Fontaine spake thusly: > Switch to meson-package > > https://gitlab.freedesktop.org/cups-pk-helper/cups-pk-helper/-/blob/0.2.7/NEWS > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/cups-pk-helper/cups-pk-helper.hash | 3 ++- > package/cups-pk-helper/cups-pk-helper.mk | 4 ++-- > 2 files changed, 4 insertions(+), 3 deletions(-) > > diff --git a/package/cups-pk-helper/cups-pk-helper.hash b/package/cups-pk-helper/cups-pk-helper.hash > index 18fe789389..75c5a5ffda 100644 > --- a/package/cups-pk-helper/cups-pk-helper.hash > +++ b/package/cups-pk-helper/cups-pk-helper.hash > @@ -1,3 +1,4 @@ > +# From https://www.freedesktop.org/software/cups-pk-helper/releases/cups-pk-helper-0.2.7.tar.xz.sha256sum > +sha256 66070ddb448fe9fcee76aa26be2ede5a80f85563e3a4afd59d2bfd79fbe2e831 cups-pk-helper-0.2.7.tar.xz > # Locally computed: > -sha256 959af8f2f5a2761e7e498b61c9caf25ae963335031eae9972d999e9a0d97a228 cups-pk-helper-0.2.6.tar.xz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING > diff --git a/package/cups-pk-helper/cups-pk-helper.mk b/package/cups-pk-helper/cups-pk-helper.mk > index c688743160..2bd00c6912 100644 > --- a/package/cups-pk-helper/cups-pk-helper.mk > +++ b/package/cups-pk-helper/cups-pk-helper.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -CUPS_PK_HELPER_VERSION = 0.2.6 > +CUPS_PK_HELPER_VERSION = 0.2.7 > CUPS_PK_HELPER_SITE = https://www.freedesktop.org/software/cups-pk-helper/releases > CUPS_PK_HELPER_SOURCE = cups-pk-helper-$(CUPS_PK_HELPER_VERSION).tar.xz > CUPS_PK_HELPER_LICENSE = GPL-2.0+ > @@ -12,4 +12,4 @@ CUPS_PK_HELPER_LICENSE_FILES = COPYING > CUPS_PK_HELPER_CPE_ID_VENDOR = cups-pk-helper_project > CUPS_PK_HELPER_DEPENDENCIES = cups libglib2 polkit > > -$(eval $(autotools-package)) > +$(eval $(meson-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:57 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:57 +0100 Subject: [Buildroot] [PATCH 1/1] package/libxml2: security bump to version 2.10.3 In-Reply-To: <20221015223439.202348-1-fontaine.fabrice@gmail.com> (Fabrice Fontaine's message of "Sun, 16 Oct 2022 00:34:39 +0200") References: <20221015223439.202348-1-fontaine.fabrice@gmail.com> Message-ID: <87bkpsuxem.fsf@dell.be.48ers.dk> >>>>> "Fabrice" == Fabrice Fontaine writes: > - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles > - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE > - Fix overflow check in SAX2.c > https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 > Signed-off-by: Fabrice Fontaine Committed to 2022.08.x and 2022.02.x, thanks. -- Bye, Peter Korsgaard From yann.morin.1998 at free.fr Mon Oct 31 09:59:14 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:59:14 +0100 Subject: [Buildroot] [PATCH 1/2] package/exfatprogs: drop host-pkgconf dependency In-Reply-To: <20221030215046.461380-1-fontaine.fabrice@gmail.com> References: <20221030215046.461380-1-fontaine.fabrice@gmail.com> Message-ID: <20221031095914.GR1058960@scaer> Fabrice, All, On 2022-10-30 22:50 +0100, Fabrice Fontaine spake thusly: > host-pkgconf is not a dependency since bump to version 1.0.3 in commit > fbad745139125ea0995a436fd81ce7ea233638c0 and > https://github.com/exfatprogs/exfatprogs/commit/843124cd9a2087281e00bd1b9d710db59acfbced > > Signed-off-by: Fabrice Fontaine Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/exfatprogs/exfatprogs.mk | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/package/exfatprogs/exfatprogs.mk b/package/exfatprogs/exfatprogs.mk > index 2911d21f4f..44679c7d60 100644 > --- a/package/exfatprogs/exfatprogs.mk > +++ b/package/exfatprogs/exfatprogs.mk > @@ -9,8 +9,6 @@ EXFATPROGS_SOURCE = exfatprogs-$(EXFATPROGS_VERSION).tar.xz > EXFATPROGS_SITE = https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION) > EXFATPROGS_LICENSE = GPL-2.0+ > EXFATPROGS_LICENSE_FILES = COPYING > -EXFATPROGS_DEPENDENCIES = host-pkgconf > -HOST_EXFATPROGS_DEPENDENCIES = host-pkgconf > > $(eval $(autotools-package)) > $(eval $(host-autotools-package)) > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 09:59:31 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 10:59:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/{libuv, uvw}: bump to versions 1.44.2, 2.12.1_libuv_v1.44 In-Reply-To: <20221030213743.943645-1-bernd.kuhls@t-online.de> References: <20221030213743.943645-1-bernd.kuhls@t-online.de> Message-ID: <20221031095931.GS1058960@scaer> Bernd, All, On 2022-10-30 22:37 +0100, Bernd Kuhls spake thusly: > - libuv > Release notes: > https://github.com/libuv/libuv/issues/3452 > https://github.com/libuv/libuv/issues/3522 > https://github.com/libuv/libuv/issues/3586 > > Updated license hash due to various commits regarding Android/Windows. > > - uvw: > Updated license hash due to copyright year bump: > https://github.com/skypjack/uvw/commit/cca65db1f4a6ba74cb51f77754cd1f8ce64d9d63 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/libuv/libuv.hash | 4 ++-- > package/libuv/libuv.mk | 2 +- > package/uvw/uvw.hash | 4 ++-- > package/uvw/uvw.mk | 2 +- > 4 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/package/libuv/libuv.hash b/package/libuv/libuv.hash > index 1874aa344c..b0fa0ff5be 100644 > --- a/package/libuv/libuv.hash > +++ b/package/libuv/libuv.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 9e27825a55279de69a7c43e42d509fd1337c9bece2547c761e91a1592e91cc4d libuv-1.43.0.tar.gz > -sha256 6d20216ae022fbeed23916f48508fd807ece3d8464992330643b0e64e5c0c24b LICENSE > +sha256 e6e2ba8b4c349a4182a33370bb9be5e23c51b32efb9b9e209d0e8556b73a48da libuv-1.44.2.tar.gz > +sha256 95b8b163c60d17cfce3cef61a2d8a9cf70137502c8fb5f3d93cd2fc529fa98c8 LICENSE > diff --git a/package/libuv/libuv.mk b/package/libuv/libuv.mk > index ed51fc92f9..c169b76a6a 100644 > --- a/package/libuv/libuv.mk > +++ b/package/libuv/libuv.mk > @@ -6,7 +6,7 @@ > > # When bumping libuv, check if a new version of uvw is available > # and bump it too. > -LIBUV_VERSION = 1.43.0 > +LIBUV_VERSION = 1.44.2 > LIBUV_SITE = $(call github,libuv,libuv,v$(LIBUV_VERSION)) > LIBUV_DEPENDENCIES = host-pkgconf > LIBUV_INSTALL_STAGING = YES > diff --git a/package/uvw/uvw.hash b/package/uvw/uvw.hash > index 564c0980f3..a0c74bbe05 100644 > --- a/package/uvw/uvw.hash > +++ b/package/uvw/uvw.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 3af4efa2842299490ec764f2148f85f4426dfb4f8d8aa436cc2d049db2b7b514 uvw-2.11.0_libuv_v1.43.tar.gz > -sha256 5de32af2469480cf3261c9781962e0887366666ba8ee1f4a32c386c77fc50c88 LICENSE > +sha256 3460842778e91e7d2fae4201e49e4521e9d94fbbf3891ae6c52d3c9fc0673598 uvw-2.12.1_libuv_v1.44.tar.gz > +sha256 1e3b8fb895c0396aaa2138ff82c02968524e220645b21b0a4ac765858a898732 LICENSE > diff --git a/package/uvw/uvw.mk b/package/uvw/uvw.mk > index 161c40849d..b6c2135d6f 100644 > --- a/package/uvw/uvw.mk > +++ b/package/uvw/uvw.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -UVW_VERSION = 2.11.0_libuv_v1.43 > +UVW_VERSION = 2.12.1_libuv_v1.44 > UVW_SITE = $(call github,skypjack,uvw,v$(UVW_VERSION)) > UVW_INSTALL_STAGING = YES > UVW_INSTALL_TARGET = NO > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:00:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:07 +0100 Subject: [Buildroot] [PATCH 1/1] package/arp-scan: bump to version 1.9.8 In-Reply-To: <20221030213517.95390-1-fontaine.fabrice@gmail.com> References: <20221030213517.95390-1-fontaine.fabrice@gmail.com> Message-ID: <20221031100007.GT1058960@scaer> Fabrice, All, On 2022-10-30 22:35 +0100, Fabrice Fontaine spake thusly: > Update hash of COPYING (gnu.org license file used since > https://github.com/royhills/arp-scan/commit/6194ffb69d831709d49b83f734f8c338c13df28c) > > https://github.com/royhills/arp-scan/blob/1.9.8/ChangeLog > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/arp-scan/arp-scan.hash | 4 ++-- > package/arp-scan/arp-scan.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/arp-scan/arp-scan.hash b/package/arp-scan/arp-scan.hash > index dd97333013..b18c6ceb38 100644 > --- a/package/arp-scan/arp-scan.hash > +++ b/package/arp-scan/arp-scan.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 e03c36e4933c655bd0e4a841272554a347cd0136faf42c4a6564059e0761c039 arp-scan-1.9.7.tar.gz > -sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING > +sha256 b9b75ceaef6348f5951b06c773ec7a243a9e780e160eafebc369f9c27f6a7d3f arp-scan-1.9.8.tar.gz > +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING > diff --git a/package/arp-scan/arp-scan.mk b/package/arp-scan/arp-scan.mk > index 3fdbd463c2..73d1b99bc7 100644 > --- a/package/arp-scan/arp-scan.mk > +++ b/package/arp-scan/arp-scan.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -ARP_SCAN_VERSION = 1.9.7 > +ARP_SCAN_VERSION = 1.9.8 > ARP_SCAN_SITE = $(call github,royhills,arp-scan,$(ARP_SCAN_VERSION)) > ARP_SCAN_LICENSE = GPL-3.0+ > ARP_SCAN_LICENSE_FILES = COPYING > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:00:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:26 +0100 Subject: [Buildroot] [PATCH 1/1] package/exim: fix typo in comment In-Reply-To: <20221030212529.364240-1-bernd.kuhls@t-online.de> References: <20221030212529.364240-1-bernd.kuhls@t-online.de> Message-ID: <20221031100026.GU1058960@scaer> Bernd, All, On 2022-10-30 22:25 +0100, Bernd Kuhls spake thusly: > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/exim/exim.mk | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/package/exim/exim.mk b/package/exim/exim.mk > index e0fcd83fb0..9c54eeec44 100644 > --- a/package/exim/exim.mk > +++ b/package/exim/exim.mk > @@ -20,7 +20,7 @@ define exim-config-change # variable-name, variable-value > $(@D)/Local/Makefile > endef > > -# Comment-out a variable. Has no effect if it does not exits. > +# Comment-out a variable. Has no effect if it does not exist. > define exim-config-unset # variable-name > $(SED) 's,^\([[:space:]]*$1[[:space:]]*=.*$$\),# \1,' \ > $(@D)/Local/Makefile > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:27 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:27 +0100 Subject: [Buildroot] [git commit branch/2022.02.x] package/libxml2: security bump to version 2.10.3 Message-ID: <20221031100044.873EC87876@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=15d1284266ee35ecbb5f98a807ba18abe2e38d7d branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.02.x - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit df77618b12bfd442e5efd39abd013c3ba88481b8) Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From yann.morin.1998 at free.fr Mon Oct 31 10:00:41 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:00:41 +0100 Subject: [Buildroot] [PATCH 1/1] package/motion: bump to version 4.5.0 In-Reply-To: <20221030212519.66340-1-fontaine.fabrice@gmail.com> References: <20221030212519.66340-1-fontaine.fabrice@gmail.com> Message-ID: <20221031100041.GV1058960@scaer> Fabrice, All, On 2022-10-30 22:25 +0100, Fabrice Fontaine spake thusly: > https://github.com/Motion-Project/motion/releases/tag/release-4.5.0 > > Signed-off-by: Fabrice Fontaine Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/motion/motion.hash | 2 +- > package/motion/motion.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/motion/motion.hash b/package/motion/motion.hash > index 085ac90449..9b99256864 100644 > --- a/package/motion/motion.hash > +++ b/package/motion/motion.hash > @@ -1,3 +1,3 @@ > # Locally computed: > -sha256 3fb0d14fff8a8a143716223b5d2d55c0f52b11badf13a2e485b98bae3cf1b572 motion-4.4.0.tar.gz > +sha256 42320a1c7b54a3f0b5a49cecf34a5d752760b28383bc573b3ca1240581786fe5 motion-4.5.0.tar.gz > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE > diff --git a/package/motion/motion.mk b/package/motion/motion.mk > index 5d54ecea01..18fe0eb630 100644 > --- a/package/motion/motion.mk > +++ b/package/motion/motion.mk > @@ -4,7 +4,7 @@ > # > ################################################################################ > > -MOTION_VERSION = 4.4.0 > +MOTION_VERSION = 4.5.0 > MOTION_SITE = $(call github,Motion-Project,motion,release-$(MOTION_VERSION)) > MOTION_LICENSE = GPL-2.0 > MOTION_LICENSE_FILES = LICENSE > -- > 2.35.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From peter at korsgaard.com Mon Oct 31 09:58:15 2022 From: peter at korsgaard.com (Peter Korsgaard) Date: Mon, 31 Oct 2022 10:58:15 +0100 Subject: [Buildroot] [git commit branch/2022.08.x] package/libxml2: security bump to version 2.10.3 Message-ID: <20221031100111.6260887876@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=6bcca6d010250154fe44e3f546107255f329fa19 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/2022.08.x - [CVE-2022-40304] Fix dict corruption caused by entity reference cycles - [CVE-2022-40303] Fix integer overflows with XML_PARSE_HUGE - Fix overflow check in SAX2.c https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.10.3 Signed-off-by: Fabrice Fontaine Signed-off-by: Peter Korsgaard (cherry picked from commit df77618b12bfd442e5efd39abd013c3ba88481b8) Signed-off-by: Peter Korsgaard --- package/libxml2/libxml2.hash | 4 ++-- package/libxml2/libxml2.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/libxml2/libxml2.hash b/package/libxml2/libxml2.hash index 4d24c60132..00daa21a83 100644 --- a/package/libxml2/libxml2.hash +++ b/package/libxml2/libxml2.hash @@ -1,4 +1,4 @@ -# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.2.sha256sum -sha256 d240abe6da9c65cb1900dd9bf3a3501ccf88b3c2a1cb98317d03f272dda5b265 libxml2-2.10.2.tar.xz +# From http://ftp.acc.umu.se/pub/gnome/sources/libxml2/2.10/libxml2-2.10.3.sha256sum +sha256 5d2cc3d78bec3dbe212a9d7fa629ada25a7da928af432c93060ff5c17ee28a9c libxml2-2.10.3.tar.xz # License files, locally calculated sha256 c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd Copyright diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk index 37a4396cbe..321e8b756b 100644 --- a/package/libxml2/libxml2.mk +++ b/package/libxml2/libxml2.mk @@ -5,7 +5,7 @@ ################################################################################ LIBXML2_VERSION_MAJOR = 2.10 -LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).2 +LIBXML2_VERSION = $(LIBXML2_VERSION_MAJOR).3 LIBXML2_SOURCE = libxml2-$(LIBXML2_VERSION).tar.xz LIBXML2_SITE = \ http://ftp.gnome.org/pub/gnome/sources/libxml2/$(LIBXML2_VERSION_MAJOR) From yann.morin.1998 at free.fr Mon Oct 31 10:01:22 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:01:22 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-pillow: bump to version 9.3.0 In-Reply-To: <20221030195404.1221968-1-james.hilliard1@gmail.com> References: <20221030195404.1221968-1-james.hilliard1@gmail.com> Message-ID: <20221031100122.GW1058960@scaer> James, All, On 2022-10-30 13:54 -0600, James Hilliard spake thusly: > Signed-off-by: James Hilliard Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/python-pillow/python-pillow.hash | 4 ++-- > package/python-pillow/python-pillow.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/package/python-pillow/python-pillow.hash b/package/python-pillow/python-pillow.hash > index 0e407bd55c..46da25dddc 100644 > --- a/package/python-pillow/python-pillow.hash > +++ b/package/python-pillow/python-pillow.hash > @@ -1,6 +1,6 @@ > # md5, sha256 from https://pypi.org/pypi/pillow/json > -md5 218bdb951f3e59e8b782e329ece3416d Pillow-9.2.0.tar.gz > -sha256 75e636fd3e0fb872693f23ccb8a5ff2cd578801251f3a4f6854c6a5d437d3c04 Pillow-9.2.0.tar.gz > +md5 a6507c1e811a51071d2d6de83070e703 Pillow-9.3.0.tar.gz > +sha256 c935a22a557a560108d780f9a0fc426dd7459940dc54faa49d83249c8d3e760f Pillow-9.3.0.tar.gz > > # Locally computed sha256 checksums > sha256 a6554cb737ba6c9b47d3301f78de03b4ed0d3f08d6cf9400714f3d4c894f6943 LICENSE > diff --git a/package/python-pillow/python-pillow.mk b/package/python-pillow/python-pillow.mk > index 31725a3e46..5ea9fcf264 100644 > --- a/package/python-pillow/python-pillow.mk > +++ b/package/python-pillow/python-pillow.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -PYTHON_PILLOW_VERSION = 9.2.0 > -PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/8c/92/2975b464d9926dc667020ed1abfa6276e68c3571dcb77e43347e15ee9eed > +PYTHON_PILLOW_VERSION = 9.3.0 > +PYTHON_PILLOW_SITE = https://files.pythonhosted.org/packages/16/11/da8d395299ca166aa56d9436e26fe8440e5443471de16ccd9a1d06f5993a > PYTHON_PILLOW_SOURCE = Pillow-$(PYTHON_PILLOW_VERSION).tar.gz > PYTHON_PILLOW_LICENSE = HPND > PYTHON_PILLOW_LICENSE_FILES = LICENSE > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:01:58 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:01:58 +0100 Subject: [Buildroot] [PATCH 1/2] package/intel-mediadriver: bump version to 22.6.0 In-Reply-To: <20221030194519.1208612-1-bernd.kuhls@t-online.de> References: <20221030194519.1208612-1-bernd.kuhls@t-online.de> Message-ID: <20221031100158.GX1058960@scaer> Bernd, All, On 2022-10-30 20:45 +0100, Bernd Kuhls spake thusly: > Signed-off-by: Bernd Kuhls Series of two patches applied to master, thanks. Regards, Yann E. MORIN. > --- > package/intel-mediadriver/intel-mediadriver.hash | 2 +- > package/intel-mediadriver/intel-mediadriver.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/intel-mediadriver/intel-mediadriver.hash b/package/intel-mediadriver/intel-mediadriver.hash > index 35e4c97c7c..d1698cbfb5 100644 > --- a/package/intel-mediadriver/intel-mediadriver.hash > +++ b/package/intel-mediadriver/intel-mediadriver.hash > @@ -1,3 +1,3 @@ > # Locally computed > -sha256 08d8d041f94b094a2dd5c4739c413b75185521c7f788a02411395ff374ee4ead intel-media-22.5.4.tar.gz > +sha256 bee655102b0c56ea3eee6e8d1d203a67bf7e0c4696ebde2b8ae40067eb12b23f intel-media-22.6.0.tar.gz > sha256 74979d5aaee78b8da82e3aafd415a216b6131dfff6d95d6930927c8a4e3bded3 LICENSE.md > diff --git a/package/intel-mediadriver/intel-mediadriver.mk b/package/intel-mediadriver/intel-mediadriver.mk > index c2d480fa21..821c0920f4 100644 > --- a/package/intel-mediadriver/intel-mediadriver.mk > +++ b/package/intel-mediadriver/intel-mediadriver.mk > @@ -6,7 +6,7 @@ > > # based on https://software.intel.com/en-us/articles/build-and-debug-open-source-media-stack > > -INTEL_MEDIADRIVER_VERSION = 22.5.4 > +INTEL_MEDIADRIVER_VERSION = 22.6.0 > INTEL_MEDIADRIVER_SITE = https://github.com/intel/media-driver/archive > INTEL_MEDIADRIVER_SOURCE= intel-media-$(INTEL_MEDIADRIVER_VERSION).tar.gz > INTEL_MEDIADRIVER_LICENSE = MIT, BSD-3-Clause > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:02:13 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:02:13 +0100 Subject: [Buildroot] [PATCH 1/1] package/flac: bump version to 1.4.2 In-Reply-To: <20221030194423.1208535-1-bernd.kuhls@t-online.de> References: <20221030194423.1208535-1-bernd.kuhls@t-online.de> Message-ID: <20221031100213.GY1058960@scaer> Bernd, All, On 2022-10-30 20:44 +0100, Bernd Kuhls spake thusly: > Changelog: https://xiph.org/flac/changelog.html > > Switched _SITE to https and update project URL. > > Upstream removed the dependency to host-nasm: > https://github.com/xiph/flac/commit/75ef7958df603ca6de29fa00e82615e0da017903#diff-49473dca262eeab3b4a43002adb08b4db31020d190caaad1594b47f1d5daa810L474 > > Signed-off-by: Bernd Kuhls Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/flac/Config.in | 2 +- > package/flac/flac.hash | 4 ++-- > package/flac/flac.mk | 11 ++--------- > 3 files changed, 5 insertions(+), 12 deletions(-) > > diff --git a/package/flac/Config.in b/package/flac/Config.in > index 267acb7f34..62aca290fe 100644 > --- a/package/flac/Config.in > +++ b/package/flac/Config.in > @@ -4,7 +4,7 @@ config BR2_PACKAGE_FLAC > help > FLAC is an Open Source lossless audio codec. > > - http://flac.sourceforge.net/ > + https://xiph.org/flac/ > > comment "flac needs a toolchain w/ wchar" > depends on !BR2_USE_WCHAR > diff --git a/package/flac/flac.hash b/package/flac/flac.hash > index 1f7763fd6e..b993ebd759 100644 > --- a/package/flac/flac.hash > +++ b/package/flac/flac.hash > @@ -1,5 +1,5 @@ > -# From http://downloads.xiph.org/releases/flac/SHA256SUMS.txt > -sha256 af41c0733c93c237c3e52f64dd87e3b0d9af38259f1c7d11e8cbf583c48c2506 flac-1.4.0.tar.xz > +# From https://ftp.osuosl.org/pub/xiph/releases/flac/SHA256SUMS.txt > +sha256 e322d58a1f48d23d9dd38f432672865f6f79e73a6f9cc5a5f57fcaa83eb5a8e4 flac-1.4.2.tar.xz > # Locally computed > sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING.GPL > sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING.LGPL > diff --git a/package/flac/flac.mk b/package/flac/flac.mk > index 91d5840d72..ebb4778521 100644 > --- a/package/flac/flac.mk > +++ b/package/flac/flac.mk > @@ -4,8 +4,8 @@ > # > ################################################################################ > > -FLAC_VERSION = 1.4.0 > -FLAC_SITE = http://downloads.xiph.org/releases/flac > +FLAC_VERSION = 1.4.2 > +FLAC_SITE = https://ftp.osuosl.org/pub/xiph/releases/flac > FLAC_SOURCE = flac-$(FLAC_VERSION).tar.xz > FLAC_INSTALL_STAGING = YES > FLAC_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv) > @@ -27,11 +27,4 @@ else > FLAC_CONF_OPTS += --disable-ogg > endif > > -ifeq ($(BR2_X86_CPU_HAS_SSE),y) > -FLAC_DEPENDENCIES += host-nasm > -FLAC_CONF_OPTS += --enable-sse > -else > -FLAC_CONF_OPTS += --disable-sse > -endif > - > $(eval $(autotools-package)) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 10:26:05 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:26:05 +0100 Subject: [Buildroot] [git commit] package/libostree: select libarchive for s390x architecture Message-ID: <20221031102627.DE38287885@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=8369ff62db68ad911e8fac55881006c75af8b86e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master libarchive is needed when building for s390x. Introduced in this patch: c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case Fixes: http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ Signed-off-by: Marcus Folkesson Signed-off-by: Thomas Petazzoni --- package/libostree/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/libostree/Config.in b/package/libostree/Config.in index 14ae4da4c8..696e8e1d6c 100644 --- a/package/libostree/Config.in +++ b/package/libostree/Config.in @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() depends on !BR2_TOOLCHAIN_USES_MUSL select BR2_PACKAGE_E2FSPROGS + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBGPG_ERROR select BR2_PACKAGE_LIBGPGME From thomas.petazzoni at bootlin.com Mon Oct 31 10:27:33 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:27:33 +0100 Subject: [Buildroot] [PATCH] package/libostree: select libarchive for s390x architecture In-Reply-To: <20221011062647.741292-1-marcus.folkesson@gmail.com> References: <20221011062647.741292-1-marcus.folkesson@gmail.com> Message-ID: <20221031112733.7113d46c@windsurf> Hello Marcus, On Tue, 11 Oct 2022 08:26:47 +0200 Marcus Folkesson wrote: > libarchive is needed when building for s390x. > > Introduced in this patch: > c6a53ef6e8f9491633b0d494991f94c629791e1d s390x: use 'libarchive' to modify initrd in SE case > > Fixes: > http://autobuild.buildroot.net/results/14cc164ab3005be9b3efde57b4bd914414e3acf0/ > > Signed-off-by: Marcus Folkesson > --- > package/libostree/Config.in | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/libostree/Config.in b/package/libostree/Config.in > index 14ae4da4c8..a36e12ddde 100644 > --- a/package/libostree/Config.in > +++ b/package/libostree/Config.in > @@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBOSTREE > # doesn't build with musl due to lack of TEMP_FAILURE_RETRY() > depends on !BR2_TOOLCHAIN_USES_MUSL > select BR2_PACKAGE_E2FSPROGS > + select BR2_PACKAGE_LIBARCHIVE if BR2_s390x Thanks for the patch! The indentation was not correct here, so I fixed that up and applied. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 10:32:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:32:31 +0100 Subject: [Buildroot] [git commit] package/catatonit: new package Message-ID: <20221031103651.1CAD287891@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=e3975ec7d4b478ec6c1ba56b63cbb5bccfb9dd09 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master catatonit is a simple but valid init binary to act as PID 1 for containers. https://github.com/openSUSE/catatonit Dependency of podman. Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + ...figure.ac-call-AM_INIT_AUTOMAKE-only-once.patch | 41 ++++++++++++++++++++++ package/catatonit/Config.in | 8 +++++ package/catatonit/catatonit.hash | 3 ++ package/catatonit/catatonit.mk | 14 ++++++++ 6 files changed, 68 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 82776cc14d..5939361ba8 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -533,6 +533,7 @@ F: package/python-pylibftdi/ N: Christian Stewart F: package/batman-adv/ +F: package/catatonit/ F: package/containerd/ F: package/crun/ F: package/delve/ diff --git a/package/Config.in b/package/Config.in index 7ae354d6eb..cbdaed2279 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2531,6 +2531,7 @@ comment "Utilities" source "package/apg/Config.in" source "package/at/Config.in" source "package/bash-completion/Config.in" + source "package/catatonit/Config.in" source "package/ccrypt/Config.in" source "package/crudini/Config.in" source "package/dialog/Config.in" diff --git a/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch b/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch new file mode 100644 index 0000000000..b978a827a1 --- /dev/null +++ b/package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch @@ -0,0 +1,41 @@ +From 99bb9048f532257f3a2c3856cfa19fe957ab6cec Mon Sep 17 00:00:00 2001 +From: Antonio Terceiro +Date: Thu, 4 Nov 2021 07:37:13 -0300 +Subject: [PATCH] configure.ac: call AM_INIT_AUTOMAKE only once + +That second call seems to be there since the beginning, and autoconf +2.69 was fine with it. autoconf 2.71 doesn't allow it anymore: + + $ ./autogen.sh + autoreconf: export WARNINGS= + autoreconf: Entering directory '.' + autoreconf: configure.ac: not using Gettext + autoreconf: running: aclocal --force + configure.ac:34: error: AM_INIT_AUTOMAKE expanded multiple times + /usr/share/aclocal-1.16/init.m4:29: AM_INIT_AUTOMAKE is expanded from... + configure.ac:19: the top level + /usr/share/aclocal-1.16/init.m4:29: AM_INIT_AUTOMAKE is expanded from... + configure.ac:34: the top level + autom4te: error: /usr/bin/m4 failed with exit status: 1 + aclocal: error: /usr/bin/autom4te failed with exit status: 1 + autoreconf: error: aclocal failed with exit status: 1 + +Signed-off-by: Antonio Terceiro +Upstream: https://github.com/openSUSE/catatonit/commit/99bb9048f532257f3a2c3856cfa19fe957ab6cec +Signed-off-by: Christian Stewart +--- + configure.ac | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/configure.ac b/configure.ac +index 12c9186..94c5c84 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -31,4 +31,3 @@ AC_FUNC_FORK + + AC_CONFIG_FILES([Makefile config.h]) + AC_OUTPUT +-AM_INIT_AUTOMAKE +-- +2.37.2 + diff --git a/package/catatonit/Config.in b/package/catatonit/Config.in new file mode 100644 index 0000000000..2bd3ab6717 --- /dev/null +++ b/package/catatonit/Config.in @@ -0,0 +1,8 @@ +config BR2_PACKAGE_CATATONIT + bool "catatonit" + depends on BR2_USE_MMU + help + catatonit is a simple but valid init binary to act as + PID 1 for containers. + + https://github.com/openSUSE/catatonit diff --git a/package/catatonit/catatonit.hash b/package/catatonit/catatonit.hash new file mode 100644 index 0000000000..9b7420cdb7 --- /dev/null +++ b/package/catatonit/catatonit.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 e22bc72ebc23762dad8f5d2ed9d5ab1aaad567bdd54422f1d1da775277a93296 catatonit-0.1.7.tar.gz +sha256 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986 COPYING diff --git a/package/catatonit/catatonit.mk b/package/catatonit/catatonit.mk new file mode 100644 index 0000000000..3dd58eff1d --- /dev/null +++ b/package/catatonit/catatonit.mk @@ -0,0 +1,14 @@ +################################################################################ +# +# catatonit +# +################################################################################ + +CATATONIT_VERSION = 0.1.7 +CATATONIT_SITE = $(call github,openSUSE,catatonit,v$(CATATONIT_VERSION)) +CATATONIT_LICENSE = GPL-3.0+ +CATATONIT_LICENSE_FILES = COPYING + +CATATONIT_AUTORECONF = YES + +$(eval $(autotools-package)) From thomas.petazzoni at bootlin.com Mon Oct 31 10:37:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:37:03 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/catatonit: new package In-Reply-To: <20220821041417.483818-1-christian@paral.in> References: <20220821041417.483818-1-christian@paral.in> Message-ID: <20221031113703.1d622fc1@windsurf> On Sat, 20 Aug 2022 21:14:17 -0700 Christian Stewart via buildroot wrote: > catatonit is a simple but valid init binary to act as PID 1 for containers. > > https://github.com/openSUSE/catatonit > > Dependency of podman. > > Signed-off-by: Christian Stewart > --- > DEVELOPERS | 1 + > package/Config.in | 1 + > ...e.ac-call-AM_INIT_AUTOMAKE-only-once.patch | 39 +++++++++++++++++++ > package/catatonit/Config.in | 7 ++++ > package/catatonit/catatonit.hash | 3 ++ > package/catatonit/catatonit.mk | 14 +++++++ > 6 files changed, 65 insertions(+) > create mode 100644 package/catatonit/0001-configure.ac-call-AM_INIT_AUTOMAKE-only-once.patch > create mode 100644 package/catatonit/Config.in > create mode 100644 package/catatonit/catatonit.hash > create mode 100644 package/catatonit/catatonit.mk A dependency on BR2_USE_MMU was missing, so I've added it, and applied. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 10:38:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:38:08 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/conmon: new package In-Reply-To: References: <20220821050119.578342-1-christian@paral.in> Message-ID: <20221031113808.7d046f38@windsurf> On Sun, 18 Sep 2022 14:04:08 -0700 Christian Stewart via buildroot wrote: > This package requires a dependency on host-pkgconf and libglib2 > > I will include this in the next revision. ACK, patch marked as Changes Requested then. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From paul at crapouillou.net Mon Oct 31 10:40:14 2022 From: paul at crapouillou.net (Paul Cercueil) Date: Mon, 31 Oct 2022 10:40:14 +0000 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build In-Reply-To: <20221030230410.982946-1-paul@crapouillou.net> References: <20221030230410.982946-1-paul@crapouillou.net> Message-ID: <2N5MKR.3RVYNROA50C41@crapouillou.net> Le dim. 30 oct. 2022 ? 23:04:10 +0000, Paul Cercueil a ?crit : > Add a patch cherry-picked from upstream to fix the build with GCC 12. > > Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. > I don't know if it fixes any autobuilder errors, I noticed the bug > when > building locally. > > Signed-off-by: Paul Cercueil > --- > ...ibmatrix-Add-missing-utility-include.patch | 29 > +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 > package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > > diff --git > a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > new file mode 100644 > index 0000000000..2a658393ae > --- /dev/null > +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > @@ -0,0 +1,29 @@ > +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 > 2001 > +From: Alexandros Frantzis > +Date: Mon, 14 Feb 2022 13:54:09 +0200 > +Subject: [PATCH] libmatrix: Add missing include > + > +Fixes compilation with GCC 12. > + > +Fixes #169 Forgot I had to sign the patch too: Signed-off-by: Paul Cercueil Cheers, -Paul > +--- > + Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a > + > + src/libmatrix/program.h | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h > +index f95b470..1c9de08 100644 > +--- a/src/libmatrix/program.h > ++++ b/src/libmatrix/program.h > +@@ -15,6 +15,7 @@ > + #include > + #include > + #include > ++#include > + #include "mat.h" > + > + // Simple shader container. Abstracts all of the OpenGL bits, but > leaves > +-- > +2.35.1 > + > -- > 2.35.1 > From thomas.petazzoni at bootlin.com Mon Oct 31 10:39:35 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:39:35 +0100 Subject: [Buildroot] [git commit] package/cni-plugins: new package Message-ID: <20221031104104.758008789B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d76655c86ecc8ce302490422e8d6a286857ef36c branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Container Networking Interface plugins. https://github.com/containernetworking/plugins Dependency of podman. Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 1 + package/Config.in | 1 + package/cni-plugins/Config.in | 16 +++++++++++ package/cni-plugins/cni-plugins.hash | 3 +++ package/cni-plugins/cni-plugins.mk | 51 ++++++++++++++++++++++++++++++++++++ 5 files changed, 72 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 5939361ba8..64af4deb53 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -534,6 +534,7 @@ F: package/python-pylibftdi/ N: Christian Stewart F: package/batman-adv/ F: package/catatonit/ +F: package/cni-plugins/ F: package/containerd/ F: package/crun/ F: package/delve/ diff --git a/package/Config.in b/package/Config.in index cbdaed2279..450a73d4ca 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1821,6 +1821,7 @@ menu "Networking" source "package/bluez5_utils-headers/Config.in" source "package/c-ares/Config.in" source "package/cgic/Config.in" + source "package/cni-plugins/Config.in" source "package/cppzmq/Config.in" source "package/curlpp/Config.in" source "package/czmq/Config.in" diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in new file mode 100644 index 0000000000..e01cadc026 --- /dev/null +++ b/package/cni-plugins/Config.in @@ -0,0 +1,16 @@ +config BR2_PACKAGE_CNI_PLUGINS + bool "cni-plugins" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve + depends on BR2_USE_MMU + help + Container Networking Interface plugins. + + https://github.com/containernetworking/plugins + +comment "cni-plugins needs a glibc or musl toolchain w/ threads" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ + BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/cni-plugins/cni-plugins.hash b/package/cni-plugins/cni-plugins.hash new file mode 100644 index 0000000000..fc3b5a7ead --- /dev/null +++ b/package/cni-plugins/cni-plugins.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 c86c44877c47f69cd23611e22029ab26b613f620195b76b3ec20f589367a7962 cni-plugins-1.1.1.tar.gz +sha256 b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1 LICENSE diff --git a/package/cni-plugins/cni-plugins.mk b/package/cni-plugins/cni-plugins.mk new file mode 100644 index 0000000000..b30937095a --- /dev/null +++ b/package/cni-plugins/cni-plugins.mk @@ -0,0 +1,51 @@ +################################################################################ +# +# cni-plugins +# +################################################################################ + +CNI_PLUGINS_VERSION = 1.1.1 +CNI_PLUGINS_SITE = $(call github,containernetworking,plugins,v$(CNI_PLUGINS_VERSION)) +CNI_PLUGINS_LICENSE = Apache-2.0 +CNI_PLUGINS_LICENSE_FILES = LICENSE + +CNI_PLUGINS_BUILD_TARGETS = \ + plugins/ipam/dhcp \ + plugins/main/bridge \ + plugins/main/host-device \ + plugins/main/ipvlan \ + plugins/main/loopback \ + plugins/main/macvlan \ + plugins/main/ptp \ + plugins/main/vlan \ + plugins/meta/bandwidth \ + plugins/meta/firewall \ + plugins/meta/portmap \ + plugins/meta/tuning \ + plugins/meta/vrf +CNI_PLUGINS_INSTALL_BINS = $(CNI_PLUGINS_BUILD_TARGETS) + +ifeq ($(BR2_PACKAGE_LIBAPPARMOR),y) +CNI_PLUGINS_DEPENDENCIES += libapparmor +CNI_PLUGINS_TAGS += apparmor +endif + +ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) +CNI_PLUGINS_TAGS += seccomp +CNI_PLUGINS_DEPENDENCIES += libseccomp host-pkgconf +endif + +ifeq ($(BR2_PACKAGE_LIBSELINUX),y) +CNI_PLUGINS_TAGS += selinux +CNI_PLUGINS_DEPENDENCIES += libselinux +endif + +define CNI_PLUGINS_INSTALL_TARGET_CMDS + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ + $(TARGET_DIR)/opt/cni/bin + ) +endef + +$(eval $(golang-package)) From thomas.petazzoni at bootlin.com Mon Oct 31 10:43:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:43:06 +0100 Subject: [Buildroot] [git commit] package/cni-plugins: add missing BR2_USE_MMU dependency on Config.in comment Message-ID: <20221031104347.4FD9E878A1@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=23407308e51d2112b030d7b135517949f3d50c1f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The main option has a BR2_USE_MMU dependency, so the Config.in comment should have it as well. Signed-off-by: Thomas Petazzoni --- package/cni-plugins/Config.in | 1 + 1 file changed, 1 insertion(+) diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in index e01cadc026..25e6ff534d 100644 --- a/package/cni-plugins/Config.in +++ b/package/cni-plugins/Config.in @@ -13,4 +13,5 @@ config BR2_PACKAGE_CNI_PLUGINS comment "cni-plugins needs a glibc or musl toolchain w/ threads" depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS + depends on BR2_USE_MMU depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_UCLIBC From thomas.petazzoni at bootlin.com Mon Oct 31 10:44:44 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 11:44:44 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/cni-plugins: new package In-Reply-To: <20220821053547.667311-1-christian@paral.in> References: <20220821053547.667311-1-christian@paral.in> Message-ID: <20221031114444.283e4776@windsurf> Hello Christian, On Sat, 20 Aug 2022 22:35:47 -0700 Christian Stewart via buildroot wrote: > diff --git a/DEVELOPERS b/DEVELOPERS > index d2bd0d809a..bc02190365 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -530,6 +530,7 @@ F: package/python-pylibftdi/ > N: Christian Stewart > F: package/batman-adv/ > F: package/containerd/ > +F: package/cni-plugins/ By alphabetic ordering I believe it falls before containerd, so I fixed that up. > diff --git a/package/cni-plugins/Config.in b/package/cni-plugins/Config.in > new file mode 100644 > index 0000000000..e01cadc026 > --- /dev/null > +++ b/package/cni-plugins/Config.in > @@ -0,0 +1,16 @@ > +config BR2_PACKAGE_CNI_PLUGINS > + bool "cni-plugins" > + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS > + depends on BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS > + depends on BR2_TOOLCHAIN_HAS_THREADS > + depends on !BR2_TOOLCHAIN_USES_UCLIBC # no fexecve > + depends on BR2_USE_MMU > + help > + Container Networking Interface plugins. But they are plugins for what? They don't have any dependency on anything specific. > + https://github.com/containernetworking/plugins > + > +comment "cni-plugins needs a glibc or musl toolchain w/ threads" > + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS && \ > + BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS You forgot BR2_USE_MMU here. I forgot it as well initially, so I fixed it up as part of a follow-up commit. > +define CNI_PLUGINS_INSTALL_TARGET_CMDS > + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin > + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ > + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ > + $(TARGET_DIR)/opt/cni/bin I kept it like this, but it's fairly unusual to install stuff in /opt. Is this the normal location for these plugins? Shouldn't they go in /usr/libexec/cni/, or something like that? So overall, I applied, but there are some questions :) Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 10:46:47 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:46:47 +0100 Subject: [Buildroot] [PATCH 1/1] package/glmark2: add patch to fix GCC 12 build In-Reply-To: <2N5MKR.3RVYNROA50C41@crapouillou.net> References: <20221030230410.982946-1-paul@crapouillou.net> <2N5MKR.3RVYNROA50C41@crapouillou.net> Message-ID: <20221031104647.GZ1058960@scaer> Paul, All, On 2022-10-31 10:40 +0000, Paul Cercueil spake thusly: > Le dim. 30 oct. 2022 ? 23:04:10 +0000, Paul Cercueil > a ?crit : > >Add a patch cherry-picked from upstream to fix the build with GCC 12. > > > >Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. > >I don't know if it fixes any autobuilder errors, I noticed the bug when > >building locally. > > > >Signed-off-by: Paul Cercueil > >--- > > ...ibmatrix-Add-missing-utility-include.patch | 29 +++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > create mode 100644 > >package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > > > >diff --git > >a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >new file mode 100644 > >index 0000000000..2a658393ae > >--- /dev/null > >+++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch > >@@ -0,0 +1,29 @@ > >+From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 > >+From: Alexandros Frantzis > >+Date: Mon, 14 Feb 2022 13:54:09 +0200 > >+Subject: [PATCH] libmatrix: Add missing include > >+ > >+Fixes compilation with GCC 12. > >+ > >+Fixes #169 > > Forgot I had to sign the patch too: > Signed-off-by: Paul Cercueil Applied to master, thanks. Regards, Yann E. MORIN. > >+--- > >+ Upstream commit: d1ca3f53c96dc8a4048b17dc16147a8fac782d4a > >+ > >+ src/libmatrix/program.h | 1 + > >+ 1 file changed, 1 insertion(+) > >+ > >+diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h > >+index f95b470..1c9de08 100644 > >+--- a/src/libmatrix/program.h > >++++ b/src/libmatrix/program.h > >+@@ -15,6 +15,7 @@ > >+ #include > >+ #include > >+ #include > >++#include > >+ #include "mat.h" > >+ > >+ // Simple shader container. Abstracts all of the OpenGL bits, but > >leaves > >+-- > >+2.35.1 > >+ > >-- > >2.35.1 > > > > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 10:46:07 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 11:46:07 +0100 Subject: [Buildroot] [git commit] package/glmark2: add patch to fix GCC 12 build Message-ID: <20221031104658.18126878A9@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bacbda92e1b1bff4689ad35beeba5d136dcc6dde branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a patch cherry-picked from upstream to fix the build with GCC 12. Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a. I don't know if it fixes any autobuilder errors, I noticed the bug when building locally. Signed-off-by: Paul Cercueil Signed-off-by: Yann E. MORIN --- ...002-libmatrix-Add-missing-utility-include.patch | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch new file mode 100644 index 0000000000..65b6183867 --- /dev/null +++ b/package/glmark2/0002-libmatrix-Add-missing-utility-include.patch @@ -0,0 +1,30 @@ +From d1ca3f53c96dc8a4048b17dc16147a8fac782d4a Mon Sep 17 00:00:00 2001 +From: Alexandros Frantzis +Date: Mon, 14 Feb 2022 13:54:09 +0200 +Subject: [PATCH] libmatrix: Add missing include + +Fixes compilation with GCC 12. + +Fixes #169 +[Paul: backport upstream d1ca3f53c96dc8a4048b17dc16147a8fac782d4a] +Signed-off-by: Paul Cercueil +--- + + src/libmatrix/program.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/src/libmatrix/program.h b/src/libmatrix/program.h +index f95b470..1c9de08 100644 +--- a/src/libmatrix/program.h ++++ b/src/libmatrix/program.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include "mat.h" + + // Simple shader container. Abstracts all of the OpenGL bits, but leaves +-- +2.35.1 + From tim.gover at raspberrypi.com Mon Oct 31 11:46:43 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 11:46:43 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README Message-ID: <20221031114643.6648-1-tim.gover@raspberrypi.com> If a custom os_prefix directory is specified then the Raspberry Pi firmware probes for the README file in overlays directory. Since the README file is small let's include it, otherwise, the firmware won't recognize the overlays directory if the user later moves it to an os_prefix specific sub-directory. From https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared with the main OS (i.e. os_prefix is ignored). Signed-off-by: Tim Gover --- package/rpi-firmware/rpi-firmware.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index d4d1d07b3f..908d7def6a 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) ) + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ endef else -- 2.25.1 From thomas.petazzoni at bootlin.com Mon Oct 31 12:07:17 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:07:17 +0100 Subject: [Buildroot] [PATCH v2] configs/qemu_aarch64_ebbr: new defconfig In-Reply-To: <20220916074147.571920-1-vincent.stehle@arm.com> References: <20220914140821.3158921-1-vincent.stehle@arm.com> <20220916074147.571920-1-vincent.stehle@arm.com> Message-ID: <20221031130717.7e6e1aa6@windsurf> Hello Vincent, On Fri, 16 Sep 2022 09:41:47 +0200 Vincent Stehl? wrote: > Add a defconfig to build an AArch64 U-Boot based firmware implementing the > subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting > with UEFI, to run on Qemu. > > The generated firmware binary can also be used to install or run another OS > supporting the EBBR specification. > > We do not have Linux 5.19 headers at the moment therefore we rely on 5.17 > in the defconfig. > > [1]: https://github.com/ARM-software/ebbr > > Signed-off-by: Vincent Stehl? > Reviewed-by: Romain Naour > Reviewed-by: Giulio Benetti > > --- > Changes v1 -> v2: > - Use shortcut letter U for boot partition in genimage config file > (suggested by Giulio and Romain) > - Drop toolchain wchar from the defconfig (suggested by Giulio and > Romain) > - Mention in the commit message that we rely on Linux headers 5.17 > because we do not have 5.19 (suggested by Giulio) > +N: Vincent Stehl? > +F: configs/qemu_aarch64_ebbr_defconfig I've also added board/qemu/aarch64-ebbr/ here, and applied. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:07:25 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:07:25 +0100 Subject: [Buildroot] [git commit] configs/qemu_aarch64_ebbr: new defconfig Message-ID: <20221031120825.66F3D878D6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=89c245b97a1db31d0545face2d1d28de48beb488 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add a defconfig to build an AArch64 U-Boot based firmware implementing the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting with UEFI, to run on Qemu. The generated firmware binary can also be used to install or run another OS supporting the EBBR specification. We do not have Linux 5.19 headers at the moment therefore we rely on 5.17 in the defconfig. [1]: https://github.com/ARM-software/ebbr Signed-off-by: Vincent Stehl?? Reviewed-by: Romain Naour Reviewed-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 4 ++ board/qemu/aarch64-ebbr/genimage.cfg | 31 ++++++++++ board/qemu/aarch64-ebbr/grub.cfg | 6 ++ board/qemu/aarch64-ebbr/post-image.sh | 11 ++++ board/qemu/aarch64-ebbr/readme.txt | 103 ++++++++++++++++++++++++++++++++++ board/qemu/aarch64-ebbr/u-boot.config | 34 +++++++++++ configs/qemu_aarch64_ebbr_defconfig | 50 +++++++++++++++++ 7 files changed, 239 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 64af4deb53..3ab4d65d67 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2989,6 +2989,10 @@ N: Vincent Prince F: package/nss-myhostname/ F: package/utp_com/ +N: Vincent Stehl?? +F: board/qemu/aarch64-ebbr/ +F: configs/qemu_aarch64_ebbr_defconfig + N: Vincent Stehl?? F: board/bananapi/bananapi-m2-zero/ F: configs/bananapi_m2_zero_defconfig diff --git a/board/qemu/aarch64-ebbr/genimage.cfg b/board/qemu/aarch64-ebbr/genimage.cfg new file mode 100644 index 0000000000..1ca8332b9c --- /dev/null +++ b/board/qemu/aarch64-ebbr/genimage.cfg @@ -0,0 +1,31 @@ +image efi-part.vfat { + vfat { + file EFI { + image = "efi-part/EFI" + } + + file Image { + image = "Image" + } + } + + size = 128M +} + +image disk.img { + hdimage { + partition-table-type = "gpt" + } + + partition boot { + image = "efi-part.vfat" + partition-type-uuid = U + offset = 32K + bootable = true + } + + partition root { + partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae + image = "rootfs.ext2" + } +} diff --git a/board/qemu/aarch64-ebbr/grub.cfg b/board/qemu/aarch64-ebbr/grub.cfg new file mode 100644 index 0000000000..d99e19c4cd --- /dev/null +++ b/board/qemu/aarch64-ebbr/grub.cfg @@ -0,0 +1,6 @@ +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /Image root=PARTLABEL=root rootwait +} diff --git a/board/qemu/aarch64-ebbr/post-image.sh b/board/qemu/aarch64-ebbr/post-image.sh new file mode 100755 index 0000000000..c884a8b6f6 --- /dev/null +++ b/board/qemu/aarch64-ebbr/post-image.sh @@ -0,0 +1,11 @@ +#!/bin/sh +set -eu + +BOARD_DIR=$(dirname "$0") + +# Create flash.bin TF-A FIP image from bl1.bin and fip.bin +dd if="${BINARIES_DIR}/bl1.bin" of="${BINARIES_DIR}/flash.bin" bs=1M +dd if="${BINARIES_DIR}/fip.bin" of="${BINARIES_DIR}/flash.bin" seek=64 bs=4096 conv=notrunc + +# Override the default GRUB configuration file with our own. +cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg" diff --git a/board/qemu/aarch64-ebbr/readme.txt b/board/qemu/aarch64-ebbr/readme.txt new file mode 100644 index 0000000000..a2027dad44 --- /dev/null +++ b/board/qemu/aarch64-ebbr/readme.txt @@ -0,0 +1,103 @@ +Introduction +============ + +The qemu_aarch64_ebbr_defconfig is meant to illustrate some aspects of the Arm +EBBR specification[1] and the Arm SystemReady IR[2] compliance program. +It allows building an AArch64 U-Boot based firmware implementing the subset of +UEFI defined by EBBR, as well as a Linux OS disk image booting with UEFI, to run +on Qemu. + +Building +======== + + $ make qemu_aarch64_ebbr_defconfig + $ make + +Generated files under output/images: + +* flash.bin: A firmware image comprising TF-A, OP-TEE and the U-Boot bootloader. + +* disk.img: An OS disk image comprising the GRUB bootloader, the Linux kernel + and the root filesystem. + +Running under Qemu +================== + +Run the emulation with: + + qemu-system-aarch64 \ + -M virt,secure=on \ + -bios output/images/flash.bin \ + -cpu cortex-a53 \ + -device virtio-blk-device,drive=hd0 \ + -device virtio-net-device,netdev=eth0 \ + -device virtio-rng-device,rng=rng0 \ + -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \ + -m 1024 \ + -netdev user,id=eth0 \ + -no-acpi \ + -nographic \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -rtc base=utc,clock=host \ + -smp 2 # qemu_aarch64_ebbr_defconfig + +The login prompt will appear in the terminal that started Qemu. + +Using the EBBR firmware to run another OS under Qemu +---------------------------------------------------- + +It is possible to use the generated firmware binary to install or run another OS +supporting the EBBR specification. + +To run another OS on emulation using a live or pre-installed image, use the same +Qemu command line as for the generated OS but adapt the OS image path in the +-drive stanza. +The image generated by the aarch64_efi_defconfig or the Arm ACS-IR images[3] are +examples of pre-installed OS images. + +To install another OS using an installer iso image, prepare a destination disk +image first with: + + qemu-img create -f qcow2 disk.qcow2 10G + +Then run the OS installer iso image on emulation with: + + qemu-system-aarch64 \ + -M virt,secure=on \ + -bios output/images/flash.bin \ + -cpu cortex-a53 \ + -device virtio-blk-device,drive=hd1 \ + -device virtio-blk-device,drive=hd0 \ + -device virtio-net-device,netdev=eth0 \ + -device virtio-rng-device,rng=rng0 \ + -drive file=,if=none,format=raw,readonly=on,id=hd0 \ + -drive file=disk.qcow2,if=none,id=hd1 \ + -m 1024 \ + -netdev user,id=eth0 \ + -no-acpi \ + -nographic \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -rtc base=utc,clock=host \ + -smp 2 + +The installation medium will show up under the Linux OS installer as /dev/vda +and the destination disk as /dev/vdb. +To reboot into the installed OS, use the same Qemu command line as for the +installation, but without the two stanzas +referring to hd0. +Linux distributions such as Debian, Fedora, openSUSE or Ubuntu provide an OS +installer iso image. + +Miscellaneous +============= + +This configuration is inspired by the qemu_aarch64_virt_defconfig, the +aarch64_efi_defconfig and the Arm SystemReady IR IoT Integration, Test, and +Certification Guide[4]. + +Firmware update is currently not supported. + +[1]: https://github.com/ARM-software/ebbr +[2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR +[3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images +[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en diff --git a/board/qemu/aarch64-ebbr/u-boot.config b/board/qemu/aarch64-ebbr/u-boot.config new file mode 100644 index 0000000000..94aae9d2aa --- /dev/null +++ b/board/qemu/aarch64-ebbr/u-boot.config @@ -0,0 +1,34 @@ +CONFIG_BOOTM_EFI=y +CONFIG_CMD_BOOTEFI=y +CONFIG_CMD_BOOTEFI_HELLO=y +CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y +CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_EFI_VARIABLE_FILE_STORE=y +CONFIG_CMD_GPT=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_RNG=y +CONFIG_CMD_RTC=y +CONFIG_DM_RTC=y +CONFIG_EFI_DEVICE_PATH_TO_TEXT=y +CONFIG_EFI_GET_TIME=y +CONFIG_EFI_HAVE_RUNTIME_RESET=y +CONFIG_EFI_LOADER=y +CONFIG_EFI_LOADER_HII=y +CONFIG_EFI_MM_COMM_TEE=y +CONFIG_EFI_PARTITION=y +CONFIG_EFI_SECURE_BOOT=y +CONFIG_EFI_SET_TIME=y +CONFIG_EFI_UNICODE_CAPITALIZATION=y +CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y +CONFIG_EFI_VARIABLE_FILE_STORE=y +CONFIG_FAT_WRITE=y +CONFIG_FIT=y +CONFIG_FS_FAT=y +CONFIG_OF_LIBFDT=y +CONFIG_OPTEE=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_RNG_OPTEE=y +CONFIG_RTC_EMULATION=y +CONFIG_SCMI_FIRMWARE=y +CONFIG_TEE=y diff --git a/configs/qemu_aarch64_ebbr_defconfig b/configs/qemu_aarch64_ebbr_defconfig new file mode 100644 index 0000000000..15822e17a3 --- /dev/null +++ b/configs/qemu_aarch64_ebbr_defconfig @@ -0,0 +1,50 @@ +# Architecture +BR2_aarch64=y + +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/aarch64-ebbr/post-image.sh support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/aarch64-ebbr/genimage.cfg" + +# Linux headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.8" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Packages +BR2_PACKAGE_OPTEE_CLIENT=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="200M" +# BR2_TARGET_ROOTFS_TAR is not set + +# Firmware and bootloader +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y +BR2_TARGET_GRUB2=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_NEEDS_DTC=y +BR2_TARGET_OPTEE_OS_PLATFORM="vexpress-qemu_armv8a" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="qemu_arm64" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/qemu/aarch64-ebbr/u-boot.config" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y + +# Host tools +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y From thomas.petazzoni at bootlin.com Mon Oct 31 12:08:14 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:08:14 +0100 Subject: [Buildroot] [git commit] package/python-pyyaml: add host package Message-ID: <20221031120825.7239D878D7@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43c7fda8d6fd4834c2ee2d75abb0b9ed87120804 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master The Jetson AGX Orin python script to flash requires host python-pyyaml. Add a Config.in.host option for the host python-pyyaml package. BR2_PACKAGE_HOST_PYTHON_PYYAML Signed-off-by: Christian Stewart Signed-off-by: Thomas Petazzoni --- package/Config.in.host | 1 + package/python-pyyaml/Config.in.host | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/package/Config.in.host b/package/Config.in.host index 8ccbf40a84..b76bea60d0 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -79,6 +79,7 @@ menu "Host utilities" source "package/python-greenlet/Config.in.host" source "package/python-kflash/Config.in.host" source "package/python-lxml/Config.in.host" + source "package/python-pyyaml/Config.in.host" source "package/python-six/Config.in.host" source "package/python-xlrd/Config.in.host" source "package/python3/Config.in.host" diff --git a/package/python-pyyaml/Config.in.host b/package/python-pyyaml/Config.in.host new file mode 100644 index 0000000000..1e8382ef5e --- /dev/null +++ b/package/python-pyyaml/Config.in.host @@ -0,0 +1,6 @@ +config BR2_PACKAGE_HOST_PYTHON_PYYAML + bool "host python-pyyaml" + help + The host PyYAML package contains binding to the libyaml API. + + http://pyyaml.org/ From thomas.petazzoni at bootlin.com Mon Oct 31 12:08:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:08:27 +0100 Subject: [Buildroot] [PATCH v2 1/1] package/python-pyyaml: add host package In-Reply-To: <20220913191429.154837-1-christian@paral.in> References: <20220913191429.154837-1-christian@paral.in> Message-ID: <20221031130827.42da99dc@windsurf> On Tue, 13 Sep 2022 12:14:29 -0700 Christian Stewart via buildroot wrote: > The Jetson AGX Orin python script to flash requires host python-pyyaml. > > Add a Config.in.host option for the host python-pyyaml package. > > BR2_PACKAGE_HOST_PYTHON_PYYAML > > Signed-off-by: Christian Stewart > > --- Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 12:12:59 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:12:59 +0100 Subject: [Buildroot] [git commit] package/rpi-firmware: add option to use custom cmdline.txt Message-ID: <20221031121311.6CE81878DF@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27024049426483091b1d5edc73cd225307e79540 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the rpi-firmware package. Overriding files in there can not be done with an overlay (which only applies to $(TARGET_DIR)), and thus requires using either a post-build or post-image script, which is not always very practical when a custom file must be used. Like was done in 689b9ac439ab (package/rpi-firmware: rework boot/config file handling) for config.txt, add an option to allow users to specify the path to a custom cmdline.txt. Signed-off-by: Yann E. MORIN Cc: Peter Seiderer Signed-off-by: Yann E. MORIN --- {package/rpi-firmware => board/raspberrypi}/cmdline.txt | 0 package/rpi-firmware/Config.in | 7 +++++++ package/rpi-firmware/rpi-firmware.mk | 10 +++++++++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/package/rpi-firmware/cmdline.txt b/board/raspberrypi/cmdline.txt similarity index 100% rename from package/rpi-firmware/cmdline.txt rename to board/raspberrypi/cmdline.txt diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in index 8070dc3019..a9aeaed745 100644 --- a/package/rpi-firmware/Config.in +++ b/package/rpi-firmware/Config.in @@ -69,6 +69,13 @@ config BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE Path to a file stored as config.txt in the boot partiton of the generated SD card image. +config BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE + string "Path to a file stored as boot/cmdline.txt" + default "board/raspberrypi/cmdline.txt" # legacy + help + Path to a file stored as cmdline.txt in the boot partiton + of the generated SD card image. + config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS bool "Install Device Tree Blobs (DTBs)" default y diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index d4d1d07b3f..6f5902fd52 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -35,6 +35,14 @@ define RPI_FIRMWARE_INSTALL_CONFIG endef endif +RPI_FIRMWARE_CMDLINE_FILE = $(call qstrip,$(BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE)) +ifneq ($(RPI_FIRMWARE_CMDLINE_FILE),) +define RPI_FIRMWARE_INSTALL_CMDLINE + $(INSTALL) -D -m 0644 $(RPI_FIRMWARE_CMDLINE_FILE) \ + $(BINARIES_DIR)/rpi-firmware/cmdline.txt +endef +endif + ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y) define RPI_FIRMWARE_INSTALL_DTB $(foreach dtb,$(wildcard $(@D)/boot/*.dtb), \ @@ -79,9 +87,9 @@ endef endif # INSTALL_VCDBG define RPI_FIRMWARE_INSTALL_IMAGES_CMDS - $(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt $(RPI_FIRMWARE_INSTALL_BIN) $(RPI_FIRMWARE_INSTALL_CONFIG) + $(RPI_FIRMWARE_INSTALL_CMDLINE) $(RPI_FIRMWARE_INSTALL_DTB) $(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS) endef From yann.morin.1998 at free.fr Mon Oct 31 12:13:26 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:13:26 +0100 Subject: [Buildroot] [PATCH] package/rpi-firmware: add option to use custom cmdline.txt In-Reply-To: <20220724131202.1364133-1-yann.morin.1998@free.fr> References: <20220724131202.1364133-1-yann.morin.1998@free.fr> Message-ID: <20221031121326.GA1058960@scaer> All, On 2022-07-24 15:12 +0200, Yann E. MORIN spake thusly: > Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the > rpi-firmware package. Overriding files in there can not be done with an > overlay (which only applies to $(TARGET_DIR)), and thus requires using > either a post-build or post-image script, which is not always very > practical when a custom file must be used. > > Like was done in 689b9ac439ab (package/rpi-firmware: rework boot/config > file handling) for config.txt, add an option to allow users to specify > the path to a custom cmdline.txt. > > Signed-off-by: Yann E. MORIN > Cc: Peter Seiderer Applied to master, thanks. Regards, Yann E. MORIN. > --- > .../rpi-firmware => board/raspberrypi}/cmdline.txt | 0 > package/rpi-firmware/Config.in | 7 +++++++ > package/rpi-firmware/rpi-firmware.mk | 10 +++++++++- > 3 files changed, 16 insertions(+), 1 deletion(-) > rename {package/rpi-firmware => board/raspberrypi}/cmdline.txt (100%) > > diff --git a/package/rpi-firmware/cmdline.txt b/board/raspberrypi/cmdline.txt > similarity index 100% > rename from package/rpi-firmware/cmdline.txt > rename to board/raspberrypi/cmdline.txt > diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in > index 8070dc3019..a9aeaed745 100644 > --- a/package/rpi-firmware/Config.in > +++ b/package/rpi-firmware/Config.in > @@ -69,6 +69,13 @@ config BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE > Path to a file stored as config.txt in the boot partiton > of the generated SD card image. > > +config BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE > + string "Path to a file stored as boot/cmdline.txt" > + default "board/raspberrypi/cmdline.txt" # legacy > + help > + Path to a file stored as cmdline.txt in the boot partiton > + of the generated SD card image. > + > config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS > bool "Install Device Tree Blobs (DTBs)" > default y > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > index d4d1d07b3f..6f5902fd52 100644 > --- a/package/rpi-firmware/rpi-firmware.mk > +++ b/package/rpi-firmware/rpi-firmware.mk > @@ -35,6 +35,14 @@ define RPI_FIRMWARE_INSTALL_CONFIG > endef > endif > > +RPI_FIRMWARE_CMDLINE_FILE = $(call qstrip,$(BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE)) > +ifneq ($(RPI_FIRMWARE_CMDLINE_FILE),) > +define RPI_FIRMWARE_INSTALL_CMDLINE > + $(INSTALL) -D -m 0644 $(RPI_FIRMWARE_CMDLINE_FILE) \ > + $(BINARIES_DIR)/rpi-firmware/cmdline.txt > +endef > +endif > + > ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y) > define RPI_FIRMWARE_INSTALL_DTB > $(foreach dtb,$(wildcard $(@D)/boot/*.dtb), \ > @@ -79,9 +87,9 @@ endef > endif # INSTALL_VCDBG > > define RPI_FIRMWARE_INSTALL_IMAGES_CMDS > - $(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt > $(RPI_FIRMWARE_INSTALL_BIN) > $(RPI_FIRMWARE_INSTALL_CONFIG) > + $(RPI_FIRMWARE_INSTALL_CMDLINE) > $(RPI_FIRMWARE_INSTALL_DTB) > $(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS) > endef > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:18:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:18:21 +0100 Subject: [Buildroot] [git commit] package/wpa_supplicant: fix static build issue with zlib-ng Message-ID: <20221031121831.250B5878F6@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=27e66d77c10b3ae3142a5ff8631ba81ce9cf70dc branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Hostapd/wpa_s uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is too generic. Buildroot autobuilder detected configurations that failed to build due to the naming conflict with zlib-ng. Add wpa_supplicant part of the upstream patch that renames 'crc32' function to a less generic 'ieee80211_crc32' name. Fixes: http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- ...ant-use-a-less-generic-name-for-IEEE802.1.patch | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch b/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch new file mode 100644 index 0000000000..a8637111bb --- /dev/null +++ b/package/wpa_supplicant/0002-wpa_supplicant-use-a-less-generic-name-for-IEEE802.1.patch @@ -0,0 +1,79 @@ +From c8af2e431b47d7d900e0c7359705aaa1096d302a Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich +Date: Fri, 16 Sep 2022 23:18:50 +0300 +Subject: [PATCH] wpa_supplicant: use a less generic name for IEEE802.11 CRC-32 routine + +Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is +too generic. Buildroot autobuilder detected build configuration that +failed to build due to the naming conflict: static linking with openssl +using zlib-ng as a zlib provider, e.g. see: +- http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ +- http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ + +Use a less generic name ieee80211_crc32 for IEEE802.11 CRC-32 routine +to avoid such naming conflicts. + +Upstream: https://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 +Signed-off-by: Sergey Matyukevich +--- + src/ap/hostapd.c | 3 ++- + src/ap/neighbor_db.c | 2 +- + src/utils/crc32.c | 2 +- + src/utils/crc32.h | 2 +- + 4 files changed, 5 insertions(+), 4 deletions(-) + +diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c +index 4b88641a2..56c8fb90e 100644 +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -1230,7 +1230,8 @@ static int hostapd_setup_bss(struct hostapd_data *hapd, int first) + * Short SSID calculation is identical to FCS and it is defined in + * IEEE P802.11-REVmd/D3.0, 9.4.2.170.3 (Calculating the Short-SSID). + */ +- conf->ssid.short_ssid = crc32(conf->ssid.ssid, conf->ssid.ssid_len); ++ conf->ssid.short_ssid = ieee80211_crc32(conf->ssid.ssid, ++ conf->ssid.ssid_len); + + if (!hostapd_drv_none(hapd)) { + wpa_printf(MSG_DEBUG, "Using interface %s with hwaddr " MACSTR +diff --git a/src/ap/neighbor_db.c b/src/ap/neighbor_db.c +index 229edd2a9..ef17634c3 100644 +--- a/src/ap/neighbor_db.c ++++ b/src/ap/neighbor_db.c +@@ -136,7 +136,7 @@ int hostapd_neighbor_set(struct hostapd_data *hapd, const u8 *bssid, + + os_memcpy(entry->bssid, bssid, ETH_ALEN); + os_memcpy(&entry->ssid, ssid, sizeof(entry->ssid)); +- entry->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ entry->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + + entry->nr = wpabuf_dup(nr); + if (!entry->nr) +diff --git a/src/utils/crc32.c b/src/utils/crc32.c +index 12d9e2a70..371254994 100644 +--- a/src/utils/crc32.c ++++ b/src/utils/crc32.c +@@ -72,7 +72,7 @@ static const u32 crc32_table[256] = { + }; + + +-u32 crc32(const u8 *frame, size_t frame_len) ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len) + { + size_t i; + u32 crc; +diff --git a/src/utils/crc32.h b/src/utils/crc32.h +index dc31399be..71a19dc5f 100644 +--- a/src/utils/crc32.h ++++ b/src/utils/crc32.h +@@ -9,6 +9,6 @@ + #ifndef CRC32_H + #define CRC32_H + +-u32 crc32(const u8 *frame, size_t frame_len); ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len); + + #endif /* CRC32_H */ +-- +2.37.1 + From thomas.petazzoni at bootlin.com Mon Oct 31 12:18:21 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:18:21 +0100 Subject: [Buildroot] [git commit] package/hostapd: fix static build issue with zlib-ng Message-ID: <20221031121831.1AC0F878F5@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=7d920f9d4060d7603da2074c3db167c39e4881fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is too generic. Buildroot autobuilder detected configurations that failed to build due to the naming conflict with zlib-ng. Add hostapd part of the upstream patch that renames 'crc32' function to a less generic 'ieee80211_crc32' name. Fixes: http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- ...generic-name-for-IEEE802.11-CRC-32-routin.patch | 102 +++++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch b/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch new file mode 100644 index 0000000000..bf85e97f21 --- /dev/null +++ b/package/hostapd/0001-use-a-less-generic-name-for-IEEE802.11-CRC-32-routin.patch @@ -0,0 +1,102 @@ +From 9896d8c116f054cebc49928404018a75c9b892cb Mon Sep 17 00:00:00 2001 +From: Sergey Matyukevich +Date: Fri, 16 Sep 2022 23:18:50 +0300 +Subject: [PATCH] hostapd: use a less generic name for IEEE802.11 CRC-32 routine + +Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is +too generic. Buildroot autobuilder detected build configuration that +failed to build due to the naming conflict: static linking with openssl +using zlib-ng as a zlib provider, e.g. see: +- http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/ +- http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/ + +Use a less generic name ieee80211_crc32 for IEEE802.11 CRC-32 routine +to avoid such naming conflicts. + +Upstream: https://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 +Signed-off-by: Sergey Matyukevich +--- + hostapd/config_file.c | 4 ++-- + src/ap/hostapd.c | 3 ++- + src/ap/neighbor_db.c | 2 +- + src/utils/crc32.c | 2 +- + src/utils/crc32.h | 2 +- + 5 files changed, 7 insertions(+), 6 deletions(-) + +diff --git a/hostapd/config_file.c b/hostapd/config_file.c +index b14728d1b..b38a84647 100644 +--- a/hostapd/config_file.c ++++ b/hostapd/config_file.c +@@ -2407,7 +2407,7 @@ static int hostapd_config_fill(struct hostapd_config *conf, + } + os_memcpy(ssid->ssid, pos, ssid->ssid_len); + ssid->ssid_set = 1; +- ssid->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ ssid->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + } else if (os_strcmp(buf, "ssid2") == 0) { + struct hostapd_ssid *ssid = &bss->ssid; + size_t slen; +@@ -2421,7 +2421,7 @@ static int hostapd_config_fill(struct hostapd_config *conf, + os_memcpy(ssid->ssid, str, slen); + ssid->ssid_len = slen; + ssid->ssid_set = 1; +- ssid->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ ssid->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + os_free(str); + } else if (os_strcmp(buf, "utf8_ssid") == 0) { + bss->ssid.utf8_ssid = atoi(pos) > 0; +diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c +index 4b88641a2..56c8fb90e 100644 +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -1230,7 +1230,8 @@ static int hostapd_setup_bss(struct hostapd_data *hapd, int first) + * Short SSID calculation is identical to FCS and it is defined in + * IEEE P802.11-REVmd/D3.0, 9.4.2.170.3 (Calculating the Short-SSID). + */ +- conf->ssid.short_ssid = crc32(conf->ssid.ssid, conf->ssid.ssid_len); ++ conf->ssid.short_ssid = ieee80211_crc32(conf->ssid.ssid, ++ conf->ssid.ssid_len); + + if (!hostapd_drv_none(hapd)) { + wpa_printf(MSG_DEBUG, "Using interface %s with hwaddr " MACSTR +diff --git a/src/ap/neighbor_db.c b/src/ap/neighbor_db.c +index 229edd2a9..ef17634c3 100644 +--- a/src/ap/neighbor_db.c ++++ b/src/ap/neighbor_db.c +@@ -136,7 +136,7 @@ int hostapd_neighbor_set(struct hostapd_data *hapd, const u8 *bssid, + + os_memcpy(entry->bssid, bssid, ETH_ALEN); + os_memcpy(&entry->ssid, ssid, sizeof(entry->ssid)); +- entry->short_ssid = crc32(ssid->ssid, ssid->ssid_len); ++ entry->short_ssid = ieee80211_crc32(ssid->ssid, ssid->ssid_len); + + entry->nr = wpabuf_dup(nr); + if (!entry->nr) +diff --git a/src/utils/crc32.c b/src/utils/crc32.c +index 12d9e2a70..371254994 100644 +--- a/src/utils/crc32.c ++++ b/src/utils/crc32.c +@@ -72,7 +72,7 @@ static const u32 crc32_table[256] = { + }; + + +-u32 crc32(const u8 *frame, size_t frame_len) ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len) + { + size_t i; + u32 crc; +diff --git a/src/utils/crc32.h b/src/utils/crc32.h +index dc31399be..71a19dc5f 100644 +--- a/src/utils/crc32.h ++++ b/src/utils/crc32.h +@@ -9,6 +9,6 @@ + #ifndef CRC32_H + #define CRC32_H + +-u32 crc32(const u8 *frame, size_t frame_len); ++u32 ieee80211_crc32(const u8 *frame, size_t frame_len); + + #endif /* CRC32_H */ +-- +2.37.1 + From thomas.petazzoni at bootlin.com Mon Oct 31 12:19:04 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:19:04 +0100 Subject: [Buildroot] [PATCH v2 0/2] hostapd/wpa_s: fix static build issue with zlib-ng In-Reply-To: <20220916210059.2395129-1-geomatsi@gmail.com> References: <20220916210059.2395129-1-geomatsi@gmail.com> Message-ID: <20221031131904.329c060d@windsurf> Hello Sergey, On Sat, 17 Sep 2022 00:00:57 +0300 Sergey Matyukevich wrote: > This patch series applies appropriate hostapd upstream fix that renames > 'crc32' function to a less generic name, see: > http://w1.fi/cgit/hostap/commit/?id=0c7b3814ca6070a8e930dea09fde08b4058a4ca6 Thanks for pushing it upstream! This link should have been added in each patch, so that we know their upstream status. I fixed that up and applied both patches. Once again, many thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:20:03 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:20:03 +0100 Subject: [Buildroot] [git commit] utils/genrandconfig: handle a10disp Message-ID: <20221031122013.2F089878FA@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=bada3ae53f051e3788bdacb8483cd386c2f4a419 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master a10disp will raise the following build failure with a mainline kernel: cp: cannot stat '/home/autobuild/autobuild/instance-0/output-1/build/linux-5.17.15/include/video/sunxi_disp_ioctl.h': No such file or directory Fixes: - http://autobuild.buildroot.org/results/1f2607d6adece4d5dfe17fbdb032a2d228fc030f Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- utils/genrandconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/utils/genrandconfig b/utils/genrandconfig index 257fe7b520..f19a405685 100755 --- a/utils/genrandconfig +++ b/utils/genrandconfig @@ -308,6 +308,8 @@ def fixup_config(sysinfo, configfile): if 'BR2_PACKAGE_AUFS_UTIL=y\n' in configlines and \ 'BR2_PACKAGE_AUFS_UTIL_VERSION=""\n' in configlines: return False + if 'BR2_PACKAGE_A10DISP=y\n' in configlines: + return False if 'BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE=y\n' in configlines and \ 'BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SOURCE=""\n' in configlines and \ From thomas.petazzoni at bootlin.com Mon Oct 31 12:20:16 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:20:16 +0100 Subject: [Buildroot] [PATCH 1/1] utils/genrandconfig: handle a10disp In-Reply-To: <20220918162850.25720-1-fontaine.fabrice@gmail.com> References: <20220918162850.25720-1-fontaine.fabrice@gmail.com> Message-ID: <20221031132016.5c6c03ba@windsurf> On Sun, 18 Sep 2022 18:28:50 +0200 Fabrice Fontaine wrote: > a10disp will raise the following build failure with a mainline kernel: > > cp: cannot stat '/home/autobuild/autobuild/instance-0/output-1/build/linux-5.17.15/include/video/sunxi_disp_ioctl.h': No such file or directory > > Fixes: > - http://autobuild.buildroot.org/results/1f2607d6adece4d5dfe17fbdb032a2d228fc030f > > Signed-off-by: Fabrice Fontaine > --- > utils/genrandconfig | 2 ++ > 1 file changed, 2 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:19 +0100 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> Message-ID: <20221031132519.4e5ebc69@windsurf> Hello Giulio, On Wed, 19 Oct 2022 01:46:17 +0200 Giulio Benetti wrote: > At the moment all APIs folders are copied to target increasing the size of > rootfs of ~190MB. Allow to select which API folders we want to copy to > target to shrink rootfs down. > > Signed-off-by: Giulio Benetti Thanks for proposing this. Practically speaking, could you describe which folders are needed in a typical scenario you've had? Here, I have these ones: drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 2.0-api drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 3.5-api drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 4.0 drwxr-xr-x 2 thomas thomas 12288 oct. 25 22:58 4.0-api drwxr-xr-x 4 thomas thomas 16384 oct. 25 22:58 4.5 drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.1-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.2-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7-api drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.8-api drwxr-xr-x 145 thomas thomas 12288 oct. 25 22:56 gac drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 lldb drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 mono-configuration-crypto drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 monodoc drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 msbuild drwxr-xr-x 6 thomas thomas 4096 oct. 25 22:56 xbuild drwxr-xr-x 4 thomas thomas 4096 oct. 25 22:56 xbuild-frameworks > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > + bool "Specify folders to install to target" > + help > + Allow to specify which Mono folder to install to target I don't really have a very good suggestion, but I don't like the name of the option. We rarely have option names that are "sentences", i.e "specify folders to install" is a sentence. Should we instead have a single string option BR2_PACKAGE_MONO_INSTALL_LIB_DIRS, which is empty by default. When empty, it means all folders are installed. Otherwise, only the specified folders are installed. The other obvious question is whether this shouldn't simply be left as something to do in a post-build script. Even though I admit that reducing 190 MB down to something reasonable can be seen as something that is almost mandatory. Or alternatively, do we have a better way, where we could automate this selection of which folders are needed? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:39 +0100 Subject: [Buildroot] [git commit] package/oracle-mysql: add CPE variables Message-ID: <20221031122549.267DD8790B@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=fbe2a973da559ecf6fec9c2fa313cfa1fd50ea6e branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/oracle-mysql/oracle-mysql.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/package/oracle-mysql/oracle-mysql.mk b/package/oracle-mysql/oracle-mysql.mk index f1f16abbb4..1086e4125f 100644 --- a/package/oracle-mysql/oracle-mysql.mk +++ b/package/oracle-mysql/oracle-mysql.mk @@ -13,6 +13,8 @@ ORACLE_MYSQL_DEPENDENCIES = ncurses ORACLE_MYSQL_AUTORECONF = YES ORACLE_MYSQL_LICENSE = GPL-2.0 ORACLE_MYSQL_LICENSE_FILES = README COPYING +ORACLE_MYSQL_CPE_ID_VENDOR = oracle +ORACLE_MYSQL_CPE_ID_PRODUCT = mysql ORACLE_MYSQL_SELINUX_MODULES = mysql ORACLE_MYSQL_PROVIDES = mysql ORACLE_MYSQL_CONFIG_SCRIPTS = mysql_config From thomas.petazzoni at bootlin.com Mon Oct 31 12:25:53 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:25:53 +0100 Subject: [Buildroot] [PATCH 1/1] package/oracle-mysql: add CPE variables In-Reply-To: <20221018213756.268341-1-fontaine.fabrice@gmail.com> References: <20221018213756.268341-1-fontaine.fabrice@gmail.com> Message-ID: <20221031132553.6a926799@windsurf> On Tue, 18 Oct 2022 23:37:56 +0200 Fabrice Fontaine wrote: > cpe:2.3:a:oracle:mysql is a valid CPE identifier for this package: > > https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aoracle%3Amysql > > Signed-off-by: Fabrice Fontaine > --- > package/oracle-mysql/oracle-mysql.mk | 2 ++ > 1 file changed, 2 insertions(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 12:39:28 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:39:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031114643.6648-1-tim.gover@raspberrypi.com> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> Message-ID: <20221031123928.GB1058960@scaer> Tim, All, On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > If a custom os_prefix directory is specified then the Raspberry Pi > firmware probes for the README file in overlays directory. > > Since the README file is small let's include it, otherwise, 197KiB is _not_ small. In fact, the README is bigger than every dtbo, and accounts for ~25% of the size of all dtbo combined. > the firmware won't recognize the overlays directory if the user > later moves it to an os_prefix specific sub-directory. What is the goal here, in the context of Buildroot, where we only install one set of overlays? If a user moved the overlays, they already have a script that does that, so they should also ensure that script properly prepares config.txt to specify the proper os_prefix, and so it is just a matter of adding a 'touch' on the README in the same script. Regards, Yann E. MORIN. > From > https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix > > Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared > with the main OS (i.e. os_prefix is ignored). > > Signed-off-by: Tim Gover > --- > package/rpi-firmware/rpi-firmware.mk | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > index d4d1d07b3f..908d7def6a 100644 > --- a/package/rpi-firmware/rpi-firmware.mk > +++ b/package/rpi-firmware/rpi-firmware.mk > @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS > $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ > $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) > ) > + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ > $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ > endef > else > -- > 2.25.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From raphael.pavlidis at gmail.com Mon Oct 31 12:46:25 2022 From: raphael.pavlidis at gmail.com (Raphael Pavlidis) Date: Mon, 31 Oct 2022 13:46:25 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/sway: new package Message-ID: <20221031124625.21172-1-raphael.pavlidis@gmail.com> i3-compatible Wayland compositor This Wayland compositor can be used as a kiosk compositor like cage, but with the advantage of better configuration of multiple monitor and windows. For example, move a window by title to the output X or set the resolution of Y to Z. Signed-off-by: Raphael Pavlidis --- DEVELOPERS | 3 ++- package/Config.in | 1 + package/sway/Config.in | 42 ++++++++++++++++++++++++++++++++++++++++++ package/sway/sway.hash | 3 +++ package/sway/sway.mk | 36 ++++++++++++++++++++++++++++++++++++ 5 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 package/sway/Config.in create mode 100644 package/sway/sway.hash create mode 100644 package/sway/sway.mk diff --git a/DEVELOPERS b/DEVELOPERS index dac8fefd0b..0390b94519 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2477,8 +2477,9 @@ F: support/testing/tests/package/test_python_jmespath.py F: support/testing/tests/package/test_python_rsa.py F: support/testing/tests/package/test_python_s3transfer.py -N: Raphael Pavlidis +N: Raphael Pavlidis F: package/slirp4netns/ +F: package/sway/ N: Refik Tuzakli F: package/freescale-imx/ diff --git a/package/Config.in b/package/Config.in index e4eb2b7434..c70729734d 100644 --- a/package/Config.in +++ b/package/Config.in @@ -325,6 +325,7 @@ comment "Graphic applications" source "package/qt5cinex/Config.in" source "package/rrdtool/Config.in" source "package/stellarium/Config.in" + source "package/sway/Config.in" source "package/tesseract-ocr/Config.in" source "package/tinifier/Config.in" diff --git a/package/sway/Config.in b/package/sway/Config.in new file mode 100644 index 0000000000..cdeca16fc0 --- /dev/null +++ b/package/sway/Config.in @@ -0,0 +1,42 @@ +config BR2_PACKAGE_SWAY + bool "sway" + depends on BR2_PACKAGE_SYSTEMD # is required by the sd-bus provider + depends on !BR2_STATIC_LIBS # wlroots + depends on BR2_TOOLCHAIN_HAS_THREADS # wlroots + depends on BR2_PACKAGE_HAS_LIBEGL # wlroots + depends on BR2_PACKAGE_HAS_LIBEGL_WAYLAND # wlroots + depends on BR2_PACKAGE_HAS_LIBGLES # wlroots + depends on BR2_PACKAGE_HAS_UDEV # wlroots + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # json-c + depends on BR2_USE_WCHAR # pango + depends on BR2_TOOLCHAIN_HAS_THREADS # pango + depends on BR2_USE_MMU # pango + depends on BR2_INSTALL_LIBSTDCPP # pango + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # pango + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # pango + select BR2_PACKAGE_WLROOTS + select BR2_PACKAGE_JSON_C + select BR2_PACKAGE_PCRE + select BR2_PACKAGE_CAIRO + select BR2_PACKAGE_CAIRO_PNG + select BR2_PACKAGE_PANGO + help + i3-compatible Wayland compositor + + https://github.com/swaywm/sway + +comment "sway needs systemd, udev, EGL w/ Wayland backend and OpenGL ES support" + depends on !BR2_PACKAGE_SYSTEMD || \ + !BR2_PACKAGE_HAS_UDEV || \ + !BR2_PACKAGE_HAS_LIBEGL || \ + !BR2_PACKAGE_HAS_LIBEGL_WAYLAND || \ + !BR2_PACKAGE_HAS_LIBGLES + +comment "sway needs a toolchain w/ wchar, threads, C++, dynamic library, gcc >= 4.9" + depends on BR2_USE_MMU + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 || \ + !BR2_INSTALL_LIBSTDCPP || \ + BR2_STATIC_LIBS diff --git a/package/sway/sway.hash b/package/sway/sway.hash new file mode 100644 index 0000000000..6dfa71730f --- /dev/null +++ b/package/sway/sway.hash @@ -0,0 +1,3 @@ +# Locally computed, tarball verified with GPG signature +sha256 0c64536fb2883ec518e75cfb119f9300115fb49b084e3fde62b794fe2c6c8d84 sway-1.7.tar.gz +sha256 bd35722bff46327f5eded1d211207277bbe043d2a22048b282c42ef801593b8b LICENSE diff --git a/package/sway/sway.mk b/package/sway/sway.mk new file mode 100644 index 0000000000..6bf49dbb6b --- /dev/null +++ b/package/sway/sway.mk @@ -0,0 +1,36 @@ +################################################################################ +# +# sway +# +################################################################################ + +SWAY_VERSION = 1.7 +SWAY_SITE = $(call github,swaywm,sway,v$(SWAY_VERSION)) +SWAY_LICENSE = MIT +SWAY_LICENSE_FILES = LICENSE +SWAY_DEPENDENCIES = systemd host-pkgconf wlroots json-c pcre cairo pango +SWAY_CONF_OPTS = \ + -Dwerror=false \ + -Ddefault-wallpaper=false \ + -Dzsh-completions=false \ + -Dbash-completions=false \ + -Dfish-completions=false \ + -Dswaybar=false \ + -Dswaynag=false \ + -Dtray=disabled \ + -Dman-pages=disabled \ + -Dsd-bus-provider=libsystemd + +ifeq ($(BR2_PACKAGE_WLROOTS_X11),y) +SWAY_CONF_OPTS += -Dxwayland=enabled +else +SWAY_CONF_OPTS += -Dxwayland=disabled +endif + +ifeq ($(BR2_PACKAGE_GDK_PIXBUF),y) +SWAY_CONF_OPTS += -Dgdk-pixbuf=enabled +else +SWAY_CONF_OPTS += -Dgdk-pixbuf=disabled +endif + +$(eval $(meson-package)) -- 2.37.4 From thomas.petazzoni at bootlin.com Mon Oct 31 12:46:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:46:55 +0100 Subject: [Buildroot] [git commit] package/docopt-cpp: new package Message-ID: <20221031124743.AB50787917@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=43f96ced67c9a1f84d3f0edf5cd632178eb176b8 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Add docopt.cpp library that can be used to create intuitive command line interfaces with very little code by describing the valid calls using the (POSIX.1-2017) command line utility argument syntax. Signed-off-by: Eero Aaltonen Reviewed-by: Angelo Compagnucci Tested-by: Angelo Compagnucci Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 3 +++ package/Config.in | 1 + package/docopt-cpp/Config.in | 21 +++++++++++++++++++++ package/docopt-cpp/docopt-cpp.hash | 6 ++++++ package/docopt-cpp/docopt-cpp.mk | 13 +++++++++++++ 5 files changed, 44 insertions(+) diff --git a/DEVELOPERS b/DEVELOPERS index 3ab4d65d67..06ee5d8056 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -781,6 +781,9 @@ F: board/acmesystems/acqua-a5/ F: configs/acmesystems_acqua_a5_256mb_defconfig F: configs/acmesystems_acqua_a5_512mb_defconfig +N: Eero Aaltonen +F: package/docopt-cpp/ + N: Eloi Bail F: package/bayer2rgb-neon/ F: package/gstreamer1/gst1-plugins-bayer2rgb-neon/ diff --git a/package/Config.in b/package/Config.in index 450a73d4ca..238d7813f0 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2119,6 +2119,7 @@ endmenu menu "Text and terminal handling" source "package/augeas/Config.in" + source "package/docopt-cpp/Config.in" source "package/enchant/Config.in" source "package/fmt/Config.in" source "package/fstrcmp/Config.in" diff --git a/package/docopt-cpp/Config.in b/package/docopt-cpp/Config.in new file mode 100644 index 0000000000..ac85442732 --- /dev/null +++ b/package/docopt-cpp/Config.in @@ -0,0 +1,21 @@ +config BR2_PACKAGE_DOCOPT_CPP + bool "docopt-cpp" + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 + help + docopt is a library that lets you define a command line + interface with the utility argument syntax that has been + used by command line utilities for decades (POSIX.1-2017). + From the description, docopt automatically generates a parser + for the command line arguments. + + docopt Command-line interface description language + http://docopt.org/ + + docopt.cpp is a C++ port of docopt. + + https://github.com/docopt/docopt.cpp + +comment "docopt-cpp needs a toolchain w/ C++, gcc >= 4.7" + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 diff --git a/package/docopt-cpp/docopt-cpp.hash b/package/docopt-cpp/docopt-cpp.hash new file mode 100644 index 0000000000..c535914753 --- /dev/null +++ b/package/docopt-cpp/docopt-cpp.hash @@ -0,0 +1,6 @@ +# Locally computed: +sha256 28af5a0c482c6d508d22b14d588a3b0bd9ff97135f99c2814a5aa3cbff1d6632 docopt-cpp-0.6.3.tar.gz + +# Hash for license files: +sha256 c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566 LICENSE-Boost-1.0 +sha256 b2959a980bc25f5d5e020d7a31777b7184aace6eb160acc80619f85edf646f19 LICENSE-MIT diff --git a/package/docopt-cpp/docopt-cpp.mk b/package/docopt-cpp/docopt-cpp.mk new file mode 100644 index 0000000000..d90b82820f --- /dev/null +++ b/package/docopt-cpp/docopt-cpp.mk @@ -0,0 +1,13 @@ +################################################################################ +# +# docopt.cpp +# +################################################################################ + +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SITE = $(call github,docopt,docopt.cpp,v$(DOCOPT_CPP_VERSION)) +DOCOPT_CPP_INSTALL_STAGING = YES +DOCOPT_CPP_LICENSE = BSL-1.0 or MIT +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT + +$(eval $(cmake-package)) From tim.gover at raspberrypi.com Mon Oct 31 12:52:15 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 12:52:15 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031123928.GB1058960@scaer> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> Message-ID: On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > Tim, All, > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > If a custom os_prefix directory is specified then the Raspberry Pi > > firmware probes for the README file in overlays directory. > > > > Since the README file is small let's include it, otherwise, > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > and accounts for ~25% of the size of all dtbo combined. Good point. Would you be happy with simply creating an empty or small README file (a note indicating the purpose of the file) ? > > the firmware won't recognize the overlays directory if the user > > later moves it to an os_prefix specific sub-directory. > > What is the goal here, in the context of Buildroot, where we only > install one set of overlays? > > If a user moved the overlays, they already have a script that does that, > so they should also ensure that script properly prepares config.txt to > specify the proper os_prefix, and so it is just a matter of adding a > 'touch' on the README in the same script. It's fairly common for non-expert users to modify the output of a buildroot image without re-building the image themselves. Adding a README file reduces the risk of them being tripped up by this difference in behaviour. > > Regards, > Yann E. MORIN. > > > From > > https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix > > > > Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared > > with the main OS (i.e. os_prefix is ignored). > > > > Signed-off-by: Tim Gover > > --- > > package/rpi-firmware/rpi-firmware.mk | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk > > index d4d1d07b3f..908d7def6a 100644 > > --- a/package/rpi-firmware/rpi-firmware.mk > > +++ b/package/rpi-firmware/rpi-firmware.mk > > @@ -48,6 +48,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS > > $(foreach ovldtb,$(wildcard $(@D)/boot/overlays/*.dtbo), \ > > $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) > > ) > > + $(INSTALL) -D -m 0644 $(@D)/boot/overlays/README $(BINARIES_DIR)/rpi-firmware/overlays/ > > $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ > > endef > > else > > -- > > 2.25.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From yann.morin.1998 at free.fr Mon Oct 31 12:54:05 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 13:54:05 +0100 Subject: [Buildroot] [PATCH] package/mono: allow to select which folders to install to target In-Reply-To: <20221031132519.4e5ebc69@windsurf> References: <20221018234617.225947-1-giulio.benetti@benettiengineering.com> <20221031132519.4e5ebc69@windsurf> Message-ID: <20221031125405.GC1058960@scaer> Giulio, Thomas, All, On 2022-10-31 13:25 +0100, Thomas Petazzoni via buildroot spake thusly: > On Wed, 19 Oct 2022 01:46:17 +0200 > Giulio Benetti wrote: > > At the moment all APIs folders are copied to target increasing the size of > > rootfs of ~190MB. Allow to select which API folders we want to copy to > > target to shrink rootfs down. > > > > Signed-off-by: Giulio Benetti > Practically speaking, could you describe which folders are needed in a > typical scenario you've had? Yes, can you provide a rationale for when only a subset of APIs is needed? > Here, I have these ones: > > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 2.0-api > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:58 3.5-api > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 4.0 > drwxr-xr-x 2 thomas thomas 12288 oct. 25 22:58 4.0-api > drwxr-xr-x 4 thomas thomas 16384 oct. 25 22:58 4.5 > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.5-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.6-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.1-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7.2-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.7-api > drwxr-xr-x 3 thomas thomas 12288 oct. 25 22:58 4.8-api > drwxr-xr-x 145 thomas thomas 12288 oct. 25 22:56 gac > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 lldb > drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 mono-configuration-crypto > drwxr-xr-x 2 thomas thomas 4096 oct. 25 22:56 monodoc > drwxr-xr-x 3 thomas thomas 4096 oct. 25 22:56 msbuild > drwxr-xr-x 6 thomas thomas 4096 oct. 25 22:56 xbuild > drwxr-xr-x 4 thomas thomas 4096 oct. 25 22:56 xbuild-frameworks It looks like we have three sets of directories here; - version-based dirs: from 2.0-api up to 4.8-api - gac/: big number of subdirs in there... - the rest Your change trat them all on the same level, but are they all really superfluous? Is there a set that absolutely needs to be there, or can we really do with just one (or even none, see below)? Note: can we unconditionally get rid of monodoc/? Of msbuild/? Of lldb/? > > +config BR2_PACKAGE_MONO_SPECIFY_FOLDERS_TO_INSTALL > > + bool "Specify folders to install to target" > > + help > > + Allow to specify which Mono folder to install to target > > I don't really have a very good suggestion, but I don't like the name > of the option. We rarely have option names that are "sentences", i.e > "specify folders to install" is a sentence. > > Should we instead have a single string option > BR2_PACKAGE_MONO_INSTALL_LIB_DIRS, which is empty by default. When > empty, it means all folders are installed. Otherwise, only the > specified folders are installed. Agreed. I expect that having no API level installed would yield a non-working system, so: config BR2_PACKAGE_MONO_API_VERSIONS string "API versions to install" help Keep empty to install all. > The other obvious question is whether this shouldn't simply be left as > something to do in a post-build script. Even though I admit that > reducing 190 MB down to something reasonable can be seen as something > that is almost mandatory. > > Or alternatively, do we have a better way, where we could automate this > selection of which folders are needed? I would prefer we avoid carrying the list of versionned APIs (and the rest, see above). Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:54:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:54:55 +0100 Subject: [Buildroot] [PATCH 1/1] package/docopt.cpp: new package In-Reply-To: <20221019143219.329504-1-eero.aaltonen@vaisala.com> References: <20221019143219.329504-1-eero.aaltonen@vaisala.com> Message-ID: <20221031135455.32d64698@windsurf> Hello Eero, On Wed, 19 Oct 2022 17:32:19 +0300 Eero Aaltonen via buildroot wrote: > Add docopt.cpp library that can be used to create intuitive command > line interfaces with very little code by describing the valid calls > using the (POSIX.1-2017) command line utility argument syntax. > > Signed-off-by: Eero Aaltonen Thanks a lot for your patch! I'm adding in Cc Angelo, who helped by reviewing/testing your patch. I have applied your patch, but after doing a number of changes, which are described below. Angelo: look below as well, to see the few things that you missed as part of your review, as it will definitely help in doing more detailed reviews in the future! > DEVELOPERS | 3 +++ > package/Config.in | 1 + > package/docopt.cpp/Config.in | 15 +++++++++++++++ > package/docopt.cpp/docopt.cpp.hash | 6 ++++++ > package/docopt.cpp/docopt.cpp.mk | 13 +++++++++++++ > 5 files changed, 38 insertions(+) I renamed to package/docopt-cpp/. I don't think we have other packages with a "." in their name, and I didn't want to create a new situation. > diff --git a/package/docopt.cpp/Config.in b/package/docopt.cpp/Config.in > new file mode 100644 > index 0000000000..655a656398 > --- /dev/null > +++ b/package/docopt.cpp/Config.in > @@ -0,0 +1,15 @@ > +config BR2_PACKAGE_DOCOPT_CPP > + bool "docopt.cpp" > + depends on BR2_INSTALL_LIBSTDCPP > + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11 > + help > + docopt is a library that lets you define a command line > + interface with the utility argument syntax that has been > + used by command line utilities for decades (POSIX.1-2017). > + From the description, docopt automatically generates a parser > + for the command line arguments. > + > + docopt Command-line interface description language > + http://docopt.org/ > + > + docopt C++ port https://github.com/docopt/docopt.cpp The last line of the help text should only contain the upstream URL of the project, so I reformatted a bit to match this requirement. Also, you had forgotten a Config.in comment to document the C++ and gcc 4.7+ dependencies, so I have added: +comment "docopt-cpp needs a toolchain w/ C++, gcc >= 4.7" + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 > diff --git a/package/docopt.cpp/docopt.cpp.mk b/package/docopt.cpp/docopt.cpp.mk > new file mode 100644 > index 0000000000..647071243a > --- /dev/null > +++ b/package/docopt.cpp/docopt.cpp.mk > @@ -0,0 +1,13 @@ > +################################################################################ > +# > +# docopt.cpp > +# > +################################################################################ > + > +DOCOPT_CPP_VERSION = 0.6.3 > +DOCOPT_CPP_SOURCE = v$(DOCOPT_CPP_VERSION).tar.gz > +DOCOPT_CPP_SITE = https://github.com/docopt/docopt.cpp/archive/refs/tags You should have use the github macro here: +DOCOPT_CPP_VERSION = 0.6.3 +DOCOPT_CPP_SITE = $(call github,docopt,docopt.cpp,v$(DOCOPT_CPP_VERSION)) > +DOCOPT_CPP_INSTALL_STAGING = YES > +DOCOPT_CPP_LICENSE_FILES = LICENSE-Boost-1.0 LICENSE-MIT The LICENSE variable was missing, so I've added it: +DOCOPT_CPP_LICENSE = BSL-1.0 or MIT Again, applied with all those changes. See: https://gitlab.com/buildroot.org/buildroot/-/commit/43f96ced67c9a1f84d3f0edf5cd632178eb176b8 Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From yann.morin.1998 at free.fr Mon Oct 31 13:14:44 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 14:14:44 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> Message-ID: <20221031131444.GD1058960@scaer> Tim, All, On 2022-10-31 12:52 +0000, Tim Gover spake thusly: > On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > > If a custom os_prefix directory is specified then the Raspberry Pi > > > firmware probes for the README file in overlays directory. > > > Since the README file is small let's include it, otherwise, > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > > and accounts for ~25% of the size of all dtbo combined. > Good point. Would you be happy with simply creating an empty or small > README file (a note indicating the purpose of the file) ? Just touching the README should be enough I would say. > > > the firmware won't recognize the overlays directory if the user > > > later moves it to an os_prefix specific sub-directory. > > What is the goal here, in the context of Buildroot, where we only > > install one set of overlays? > > If a user moved the overlays, they already have a script that does that, > > so they should also ensure that script properly prepares config.txt to > > specify the proper os_prefix, and so it is just a matter of adding a > > 'touch' on the README in the same script. > It's fairly common for non-expert users to modify the output of a > buildroot image > without re-building the image themselves. Adding a README file reduces > the risk of them being tripped up by this difference in behaviour. So, if I read you correctly: non-expert users know they can move the overlays to a sub-dir; they also know they have to set the os_prefix accordingly in config.txt; but they don't know they have to create a README in there? ;-) Sorry, I am still unconvinced. Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 12:55:10 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 13:55:10 +0100 Subject: [Buildroot] [git commit] package/docopt-cpp: fix comment header in .mk file Message-ID: <20221031140124.92F0287931@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=2d5a94b742d5b21f480d299c319a58a5c989b382 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master This was missed in commit 43f96ced67c9a1f84d3f0edf5cd632178eb176b8 ("package/docopt-cpp: new package") Signed-off-by: Thomas Petazzoni --- package/docopt-cpp/docopt-cpp.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/docopt-cpp/docopt-cpp.mk b/package/docopt-cpp/docopt-cpp.mk index d90b82820f..897b907822 100644 --- a/package/docopt-cpp/docopt-cpp.mk +++ b/package/docopt-cpp/docopt-cpp.mk @@ -1,6 +1,6 @@ ################################################################################ # -# docopt.cpp +# docopt-cpp # ################################################################################ From thomas.petazzoni at bootlin.com Mon Oct 31 14:00:58 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:00:58 +0100 Subject: [Buildroot] [git commit] package/umtprd: add patch to fix output_dir make dependency Message-ID: <20221031140306.4137387937@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=9f1a357452d473e384f28a37d3e4ba4146519160 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Object file targets need to depend on the output_dir target. Upstream commit: https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 Fixes: - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ Signed-off-by: Paul Cercueil Signed-off-by: Thomas Petazzoni --- .../0001-Fix-output_dir-make-dependency.patch | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/package/umtprd/0001-Fix-output_dir-make-dependency.patch b/package/umtprd/0001-Fix-output_dir-make-dependency.patch new file mode 100644 index 0000000000..fcbca6b000 --- /dev/null +++ b/package/umtprd/0001-Fix-output_dir-make-dependency.patch @@ -0,0 +1,46 @@ +From d84216a678edaca81c0899318231cdcca2100d38 Mon Sep 17 00:00:00 2001 +From: James Hilliard +Date: Mon, 17 Oct 2022 16:39:56 -0600 +Subject: [PATCH] Fix output_dir make dependency + +Object file targets need to depend on the output_dir target. + +Fixes: +make --shuffle=reverse -j1 +cc -o obj/mtp_op_truncateobject.o src/mtp_operations/mtp_op_truncateobject.c -c -I./inc -lpthread -Wall -O3 +Assembler messages: +Fatal error: can't create obj/mtp_op_truncateobject.o: No such file or directory +make: *** [Makefile:19: obj/mtp_op_truncateobject.o] Error 1 shuffle=reverse + +[paul at crapouillou.net: Backport from upstream commit d84216a] +Signed-off-by: Paul Cercueil +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 7c98b63..c28e186 100644 +--- a/Makefile ++++ b/Makefile +@@ -7,15 +7,15 @@ objects := $(sources:src/%.c=obj/%.o) + ops_sources := $(wildcard src/mtp_operations/*.c) + ops_objects := $(ops_sources:src/mtp_operations/%.c=obj/%.o) + +-all: output_dir umtprd ++all: umtprd + + umtprd: $(objects) $(ops_objects) + ${CC} -o $@ $^ $(LDFLAGS) -lpthread + +-$(objects): obj/%.o: src/%.c ++$(objects): obj/%.o: src/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + +-$(ops_objects): obj/%.o: src/mtp_operations/%.c ++$(ops_objects): obj/%.o: src/mtp_operations/%.c | output_dir + ${CC} -o $@ $^ -c $(CPPFLAGS) $(CFLAGS) + + output_dir: +-- +2.35.1 + From yann.morin.1998 at free.fr Mon Oct 31 14:34:23 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 15:34:23 +0100 Subject: [Buildroot] [PATCH 1/1] package/gawk: fix double free during kernel build In-Reply-To: <20221030215458.3773991-1-james.hilliard1@gmail.com> References: <20221030215458.3773991-1-james.hilliard1@gmail.com> Message-ID: <20221031143423.GE1058960@scaer> James, All, On 2022-10-30 15:54 -0600, James Hilliard spake thusly: > Backport an upstream patch to fix a crash during kernel build. > > Details: https://bugs.gentoo.org/868567 > > Fixes: > GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c > free(): double free detected in tcache 2 > Aborted > > Signed-off-by: James Hilliard [--SNIP--] > +--- > + ChangeLog | 8 ++++++++ > + interpret.h | 1 + > + test/ChangeLog | 5 +++++ > + test/Makefile.am | 4 +++- > + test/Makefile.in | 9 ++++++++- As noticed by Romain, this triggers hidden autoreconf, which obviously fails most of the time. I noticed the issue when applying your patch this morning, but a build here did not trigger the silent autoreconf, and since Makefile.in is patched after Makefile.am, it seemed all was going to tbe OK. It did not: http://autobuild.buildroot.org/results/068/0686697cb52d22c42ae2249db3442c008082fe72/ http://autobuild.buildroot.org/results/754/75463639cb9cbc32108f059bd6044810a078db06/ So I dropped all the hunks about Makfile.am and Makefile .in, as they are only about tests, which we don't care much about, and while at it I also dropped the hunks about changelogs, which we really don't care much about either, and pushed that to master. Regards, Yann E. MORIN. > + test/Maketests | 5 +++++ > + test/elemnew1.awk | 9 +++++++++ > + test/elemnew1.ok | 0 > + 8 files changed, 39 insertions(+), 2 deletions(-) > + create mode 100644 test/elemnew1.awk > + create mode 100644 test/elemnew1.ok > + > +diff --git a/ChangeLog b/ChangeLog > +index 5fb25483..cd9d9fcd 100644 > +--- a/ChangeLog > ++++ b/ChangeLog > +@@ -1,3 +1,11 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * interpret.h (r_interpret): For the `push' opcodes, upref > ++ the Node_elem_new. See test case elemnew1. Thanks to > ++ Emanuel Attila Czirai for the report, > ++ and to Jan Alexander Steffens (heftig)" > ++ for the fix. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/interpret.h b/interpret.h > +index 57d060e6..268655b2 100644 > +--- a/interpret.h > ++++ b/interpret.h > +@@ -238,6 +238,7 @@ uninitialized_scalar: > + _("reference to uninitialized argument `%s'") : > + _("reference to uninitialized variable `%s'"), > + save_symbol->vname); > ++ UPREF(m); > + PUSH(m); > + break; > + > +diff --git a/test/ChangeLog b/test/ChangeLog > +index a73637bf..ea08edee 100644 > +--- a/test/ChangeLog > ++++ b/test/ChangeLog > +@@ -1,3 +1,8 @@ > ++2022-09-14 Arnold D. Robbins > ++ > ++ * Makefile.am (EXTRA_DIST): New test: elemnew1. > ++ * elemnew1.awk, elemnew1.ok: New files. > ++ > + 2022-09-04 Arnold D. Robbins > + > + * 5.2.0: Release tar ball made. > +diff --git a/test/Makefile.am b/test/Makefile.am > +index ab06974c..8a5c3c49 100644 > +--- a/test/Makefile.am > ++++ b/test/Makefile.am > +@@ -282,6 +282,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +diff --git a/test/Makefile.in b/test/Makefile.in > +index 834feb09..a4fb1cc1 100644 > +--- a/test/Makefile.in > ++++ b/test/Makefile.in > +@@ -550,6 +550,8 @@ EXTRA_DIST = \ > + dumpvars.ok \ > + dynlj.awk \ > + dynlj.ok \ > ++ elemnew1.awk \ > ++ elemnew1.ok \ > + escapebrace.awk \ > + escapebrace.in \ > + escapebrace.ok \ > +@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ > + binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ > + clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ > + dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ > +- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ > ++ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ > + fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ > + functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ > + fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ > +@@ -4476,6 +4478,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/Maketests b/test/Maketests > +index 3a667af8..90828e7f 100644 > +--- a/test/Maketests > ++++ b/test/Maketests > +@@ -1432,6 +1432,11 @@ dfacheck1: > + @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > + @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > + > ++elemnew1: > ++ @echo $@ > ++ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > ++ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ > ++ > + exit: > + @echo $@ > + @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ > +diff --git a/test/elemnew1.awk b/test/elemnew1.awk > +new file mode 100644 > +index 00000000..58dc9fcd > +--- /dev/null > ++++ b/test/elemnew1.awk > +@@ -0,0 +1,9 @@ > ++function add_flags(old) { > ++ if (old) > ++ return 0 > ++ if (!old) > ++ return 1 > ++} > ++BEGIN { > ++ a[0]=add_flags(a[0]) > ++} > +diff --git a/test/elemnew1.ok b/test/elemnew1.ok > +new file mode 100644 > +index 00000000..e69de29b > +-- > +2.34.1 > + > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot at buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 14:39:54 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:39:54 +0100 Subject: [Buildroot] [git commit] package/python-setuptools: bump to version 65.5.0 Message-ID: <20221031144042.0A8D987949@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d187743f3d80a7f3022f2559d5f5c7f8e0adc634 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Signed-off-by: James Hilliard Signed-off-by: Thomas Petazzoni --- package/python-setuptools/python-setuptools.hash | 4 ++-- package/python-setuptools/python-setuptools.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/package/python-setuptools/python-setuptools.hash b/package/python-setuptools/python-setuptools.hash index 3f68084068..2592fc201c 100644 --- a/package/python-setuptools/python-setuptools.hash +++ b/package/python-setuptools/python-setuptools.hash @@ -1,4 +1,4 @@ # From https://pypi.org/pypi/setuptools/json -md5 66c6b8819c5306c12c38d7fad41b7f99 setuptools-65.3.0.tar.gz -sha256 7732871f4f7fa58fb6bdcaeadb0161b2bd046c85905dbaa066bdcbcc81953b57 setuptools-65.3.0.tar.gz +md5 9018a18990e7c16159ec3972affba76c setuptools-65.5.0.tar.gz +sha256 512e5536220e38146176efb833d4a62aa726b7bbff82cfbc8ba9eaa3996e0b17 setuptools-65.5.0.tar.gz sha256 db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8 LICENSE diff --git a/package/python-setuptools/python-setuptools.mk b/package/python-setuptools/python-setuptools.mk index b7483c6347..9dc0a6a38b 100644 --- a/package/python-setuptools/python-setuptools.mk +++ b/package/python-setuptools/python-setuptools.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_SETUPTOOLS_VERSION = 65.3.0 +PYTHON_SETUPTOOLS_VERSION = 65.5.0 PYTHON_SETUPTOOLS_SOURCE = setuptools-$(PYTHON_SETUPTOOLS_VERSION).tar.gz -PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/cc/83/7ea9d9b3a6ff3225aca2fce5e4df373bee7e0a74c539711a4fbfda53374f +PYTHON_SETUPTOOLS_SITE = https://files.pythonhosted.org/packages/c5/41/247814d8b7a044717164c74080725a6c8f3d2b5fc82b34bd825b617df663 PYTHON_SETUPTOOLS_LICENSE = MIT PYTHON_SETUPTOOLS_LICENSE_FILES = LICENSE PYTHON_SETUPTOOLS_CPE_ID_VENDOR = python From yann.morin.1998 at free.fr Mon Oct 31 14:24:15 2022 From: yann.morin.1998 at free.fr (Yann E. MORIN) Date: Mon, 31 Oct 2022 15:24:15 +0100 Subject: [Buildroot] [git commit] package/gawk: don't sliently try autoreconf Message-ID: <20221031144041.F21DA87948@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=1227e4e7202adcb0b73760584bf8383aa65bc0cf branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Commit e6942ad11ff0 (package/gawk: fix double free during kernel build) backported an upstream patch, with hunks in autotools files, Makefile.am and Makefile.in. Such changes ususally require an explicitly autoreconf, but in this case, Makefile.in is modified after Makefile,am, and a simple local test did not trigger a silent autoreconf, so the patch was applied as-is. That was a bit too optimitstic, though, and the build fails in some situations. Since the hunks in the autotools files are about tests, just drop those hunks as we are not interested in running the tests. Also drop the hunks about the changelogs while at it. Fixes: http://autobuild.buildroot.org/results/068/0686697cb52d22c42ae2249db3442c008082fe72/ http://autobuild.buildroot.org/results/754/75463639cb9cbc32108f059bd6044810a078db06/ Reported-by: Romain Naour Signed-off-by: Yann E. MORIN --- .../gawk/0002-Fix-a-bug-with-Node_elem_new.patch | 132 +-------------------- 1 file changed, 3 insertions(+), 129 deletions(-) diff --git a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch index 502f7dcd95..8cbe9c6d02 100644 --- a/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch +++ b/package/gawk/0002-Fix-a-bug-with-Node_elem_new.patch @@ -6,35 +6,12 @@ Subject: [PATCH] Fix a bug with Node_elem_new. Signed-off-by: James Hilliard [james.hilliard1 at gmail.com: backport from upstream commit baab183439ff4e0c6b77d62156d447e61fc1dcfb] +[yann.morin.1998 at free.fr: drop all hunks about tests and changelogs] +Signed-off-by: Yann E. MORIN --- - ChangeLog | 8 ++++++++ interpret.h | 1 + - test/ChangeLog | 5 +++++ - test/Makefile.am | 4 +++- - test/Makefile.in | 9 ++++++++- - test/Maketests | 5 +++++ - test/elemnew1.awk | 9 +++++++++ - test/elemnew1.ok | 0 - 8 files changed, 39 insertions(+), 2 deletions(-) - create mode 100644 test/elemnew1.awk - create mode 100644 test/elemnew1.ok + 1 files changed, 1 insertions(+), 0 deletions(-) -diff --git a/ChangeLog b/ChangeLog -index 5fb25483..cd9d9fcd 100644 ---- a/ChangeLog -+++ b/ChangeLog -@@ -1,3 +1,11 @@ -+2022-09-14 Arnold D. Robbins -+ -+ * interpret.h (r_interpret): For the `push' opcodes, upref -+ the Node_elem_new. See test case elemnew1. Thanks to -+ Emanuel Attila Czirai for the report, -+ and to Jan Alexander Steffens (heftig)" -+ for the fix. -+ - 2022-09-04 Arnold D. Robbins - - * 5.2.0: Release tar ball made. diff --git a/interpret.h b/interpret.h index 57d060e6..268655b2 100644 --- a/interpret.h @@ -47,109 +24,6 @@ index 57d060e6..268655b2 100644 PUSH(m); break; -diff --git a/test/ChangeLog b/test/ChangeLog -index a73637bf..ea08edee 100644 ---- a/test/ChangeLog -+++ b/test/ChangeLog -@@ -1,3 +1,8 @@ -+2022-09-14 Arnold D. Robbins -+ -+ * Makefile.am (EXTRA_DIST): New test: elemnew1. -+ * elemnew1.awk, elemnew1.ok: New files. -+ - 2022-09-04 Arnold D. Robbins - - * 5.2.0: Release tar ball made. -diff --git a/test/Makefile.am b/test/Makefile.am -index ab06974c..8a5c3c49 100644 ---- a/test/Makefile.am -+++ b/test/Makefile.am -@@ -282,6 +282,8 @@ EXTRA_DIST = \ - dumpvars.ok \ - dynlj.awk \ - dynlj.ok \ -+ elemnew1.awk \ -+ elemnew1.ok \ - escapebrace.awk \ - escapebrace.in \ - escapebrace.ok \ -@@ -1480,7 +1482,7 @@ GAWK_EXT_TESTS = \ - binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ - clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ - dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ -- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ -+ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ - fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ - functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ - fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ -diff --git a/test/Makefile.in b/test/Makefile.in -index 834feb09..a4fb1cc1 100644 ---- a/test/Makefile.in -+++ b/test/Makefile.in -@@ -550,6 +550,8 @@ EXTRA_DIST = \ - dumpvars.ok \ - dynlj.awk \ - dynlj.ok \ -+ elemnew1.awk \ -+ elemnew1.ok \ - escapebrace.awk \ - escapebrace.in \ - escapebrace.ok \ -@@ -1748,7 +1750,7 @@ GAWK_EXT_TESTS = \ - binmode1 charasbytes clos1way clos1way2 clos1way3 clos1way4 \ - clos1way5 clos1way6 colonwarn commas crlf dbugeval dbugeval2 \ - dbugeval3 dbugtypedre1 dbugtypedre2 delsub devfd devfd1 devfd2 \ -- dfacheck1 dumpvars errno exit fieldwdth forcenum fpat1 fpat2 \ -+ dfacheck1 dumpvars elemnew1 errno exit fieldwdth forcenum fpat1 fpat2 \ - fpat3 fpat4 fpat5 fpat6 fpat7 fpat8 fpat9 fpatnull fsfwfs functab1 \ - functab2 functab3 functab6 funlen fwtest fwtest2 fwtest3 fwtest4 \ - fwtest5 fwtest6 fwtest7 fwtest8 genpot gensub gensub2 gensub3 \ -@@ -4476,6 +4478,11 @@ dfacheck1: - @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ - @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ - -+elemnew1: -+ @echo $@ -+ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -+ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ -+ - exit: - @echo $@ - @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -diff --git a/test/Maketests b/test/Maketests -index 3a667af8..90828e7f 100644 ---- a/test/Maketests -+++ b/test/Maketests -@@ -1432,6 +1432,11 @@ dfacheck1: - @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk < "$(srcdir)"/$@.in >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ - @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ - -+elemnew1: -+ @echo $@ -+ @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk >_$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -+ @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@ -+ - exit: - @echo $@ - @-$(LOCALES) AWK="$(AWKPROG)" "$(srcdir)"/$@.sh > _$@ 2>&1 || echo EXIT CODE: $$? >>_$@ -diff --git a/test/elemnew1.awk b/test/elemnew1.awk -new file mode 100644 -index 00000000..58dc9fcd ---- /dev/null -+++ b/test/elemnew1.awk -@@ -0,0 +1,9 @@ -+function add_flags(old) { -+ if (old) -+ return 0 -+ if (!old) -+ return 1 -+} -+BEGIN { -+ a[0]=add_flags(a[0]) -+} -diff --git a/test/elemnew1.ok b/test/elemnew1.ok -new file mode 100644 -index 00000000..e69de29b -- 2.34.1 From thomas.petazzoni at bootlin.com Mon Oct 31 14:14:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:14:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/umtprd: add patch to fix output_dir make dependency In-Reply-To: <20221018110157.35331-1-paul@crapouillou.net> References: <20221018110157.35331-1-paul@crapouillou.net> Message-ID: <20221031151436.328c576c@windsurf> On Tue, 18 Oct 2022 12:01:57 +0100 Paul Cercueil wrote: > Object file targets need to depend on the output_dir target. > > Upstream commit: > https://github.com/viveris/uMTP-Responder/commit/d84216a678edaca81c0899318231cdcca2100d38 > > Fixes: > - http://autobuild.buildroot.net/results/c7ce975d398190fc191ccc03813f8ec0b3464c7d/ > - http://autobuild.buildroot.net/results/0331fb9cf2748b16440ef830d09452a9812f5217/ > - http://autobuild.buildroot.net/results/a1b1de9e2f764ce22f23d8a8ea88f7ddcf2969a9/ > - http://autobuild.buildroot.net/results/7c7dbe03d769dc5f155fc14102f6591855605640/ > - http://autobuild.buildroot.net/results/6cd90b7877520669d9ab9c9fadc9fa36912963b4/ > - http://autobuild.buildroot.net/results/186689fc9637ae1a8330d7e19057cd1b3c9a841c/ > > Signed-off-by: Paul Cercueil > --- > .../0001-Fix-output_dir-make-dependency.patch | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 package/umtprd/0001-Fix-output_dir-make-dependency.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:42:12 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:42:12 +0100 Subject: [Buildroot] [git commit] package/lua-lyaml: bump to version 6.2.8 Message-ID: <20221031144227.55C7D87968@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=ce2b819d74465dc9720eeb8e5f18d789b5d2915f branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master diff LICENCE: -Copyright (C) 2013-2020 Gary V. Vaughan +Copyright (C) 2013-2022 Gary V. Vaughan Signed-off-by: Francois Perrad Signed-off-by: Thomas Petazzoni --- package/lua-lyaml/lua-lyaml.hash | 4 ++-- package/lua-lyaml/lua-lyaml.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/lua-lyaml/lua-lyaml.hash b/package/lua-lyaml/lua-lyaml.hash index af3d0ae6da..a8599bc3dd 100644 --- a/package/lua-lyaml/lua-lyaml.hash +++ b/package/lua-lyaml/lua-lyaml.hash @@ -1,3 +1,3 @@ # locally computed -sha256 9bb489cefae48b150d66f6bab4141d8d5831fcb7465bfc52a9845fa01efc63b0 lua-lyaml-6.2.7.tar.gz -sha256 81e4ea1d897e259b31111adc2d3c185fe23e435942ff3e9de8c8c9c5d01247d0 LICENSE +sha256 c6169f516ff2a8da96d55aa3a087e718edf7bceb2f1cae2def4e65cd2b41ac2d lua-lyaml-6.2.8.tar.gz +sha256 796d267e51d61652c55694d21108e7352e98b1ed489ab7516acc07102157e08d LICENSE diff --git a/package/lua-lyaml/lua-lyaml.mk b/package/lua-lyaml/lua-lyaml.mk index 77980f5312..00a868ec29 100644 --- a/package/lua-lyaml/lua-lyaml.mk +++ b/package/lua-lyaml/lua-lyaml.mk @@ -4,7 +4,7 @@ # ################################################################################ -LUA_LYAML_VERSION = 6.2.7 +LUA_LYAML_VERSION = 6.2.8 LUA_LYAML_NAME_UPSTREAM = lyaml LUA_LYAML_SITE = $(call github,gvvaughan,$(LUA_LYAML_NAME_UPSTREAM),v$(LUA_LYAML_VERSION)) LUA_LYAML_LICENSE = MIT From thomas.petazzoni at bootlin.com Mon Oct 31 14:41:31 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:41:31 +0100 Subject: [Buildroot] [git commit] package/valijson: bump to version 0.7 Message-ID: <20221031144227.3524787965@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=d264b6e81e1a03c36df55c66771ed26dd767a522 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master https://github.com/tristanpenman/valijson/releases/tag/v0.7 Signed-off-by: Fabrice Fontaine Reviewed-by: Eero Aaltonen Tested-by: Eero Aaltonen Signed-off-by: Thomas Petazzoni --- package/valijson/valijson.hash | 2 +- package/valijson/valijson.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/valijson/valijson.hash b/package/valijson/valijson.hash index 0aab93dd2a..aacdf7dedc 100644 --- a/package/valijson/valijson.hash +++ b/package/valijson/valijson.hash @@ -1,3 +1,3 @@ # Locally Computed: -sha256 e06bf78fc1d26d4956fabc182408ebbbc47e3a6699778cda4aa439c2a6110b09 valijson-0.6.tar.gz +sha256 bc24736709acfb252a5fdcb5145f1f2670c7aecaba3356f6f8ba54903800fa5c valijson-0.7.tar.gz sha256 1a0f99926a2dbec30eba3db820236d9953fbe3048976923ac24980e655fbe991 LICENSE diff --git a/package/valijson/valijson.mk b/package/valijson/valijson.mk index 4b1f722f77..51a9353960 100644 --- a/package/valijson/valijson.mk +++ b/package/valijson/valijson.mk @@ -4,7 +4,7 @@ # ################################################################################ -VALIJSON_VERSION = 0.6 +VALIJSON_VERSION = 0.7 VALIJSON_SITE = $(call github,tristanpenman,valijson,v$(VALIJSON_VERSION)) VALIJSON_LICENSE = BSD-2-Clause VALIJSON_LICENSE_FILES = LICENSE From thomas.petazzoni at bootlin.com Mon Oct 31 14:42:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:42:06 +0100 Subject: [Buildroot] [git commit] package/casync: bump to latest git commit (0efa7abffe5f) Message-ID: <20221031144227.4A5B987967@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=b55d1e9c1549ef7f53c9cf42e8cd73745063fdfe branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patches (merged to main) Signed-off-by: Yair Ben-Avraham Signed-off-by: Thomas Petazzoni --- ...0001-castore-fix-build-without-lzma-or-xz.patch | 35 -------------- ...t-install-udev-rules-without-udev-support.patch | 53 ---------------------- package/casync/casync.hash | 2 +- package/casync/casync.mk | 2 +- 4 files changed, 2 insertions(+), 90 deletions(-) diff --git a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch b/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch deleted file mode 100644 index a528b1244c..0000000000 --- a/package/casync/0001-castore-fix-build-without-lzma-or-xz.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 06b667de02df34e3efa1864b4031853bd4ee010d Mon Sep 17 00:00:00 2001 -From: Yair Ben-Avraham -Date: Sun, 10 Jan 2021 06:34:58 +0100 -Subject: [PATCH] castore: fix build without lzma or xz - -castore.c unconditioanlly includes lzma.h, but lzma support if optional. -Furthermore, castore.c does not need anything from lzma.h. - -Drop the include altogether. - -Signed-off-by: Yair Ben-Avraham -[yann.morin.1998 at free.fr: - - lzma.h is not needed at all - - rewrite commit log accordingly -] -Signed-off-by: Yann E. MORIN ---- - src/castore.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/src/castore.c b/src/castore.c -index c290dfd..b2e5320 100644 ---- a/src/castore.c -+++ b/src/castore.c -@@ -2,7 +2,6 @@ - - #include - #include --#include - #include - #include - --- -2.25.1 - diff --git a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch b/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch deleted file mode 100644 index 838b065571..0000000000 --- a/package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e3f683dc3013d14bddb9f9ec5bdc31367dc51a1c Mon Sep 17 00:00:00 2001 -From: "Yann E. MORIN" -Date: Sun, 10 Jan 2021 10:44:39 +0100 -Subject: [PATCH] build: don't install udev rules without udev support - -Signed-off-by: Yann E. MORIN ---- - meson.build | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -diff --git a/meson.build b/meson.build -index aac7727..92be1ea 100644 ---- a/meson.build -+++ b/meson.build -@@ -151,6 +151,11 @@ conf.set10('HAVE_SELINUX', get_option('selinux')) - - if get_option('udev') - libudev = dependency('libudev') -+ udevrulesdir = get_option('udevrulesdir') -+ if udevrulesdir == '' -+ udev = dependency('udev', required : false) -+ udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') -+ endif - else - libudev = [] - endif -@@ -175,12 +180,6 @@ subdir('test') - - includes = include_directories('src') - --udevrulesdir = get_option('udevrulesdir') --if udevrulesdir == '' -- udev = dependency('udev', required : false) -- udevrulesdir = join_paths(udev.get_pkgconfig_variable('udevdir'), 'rules.d') --endif -- - subdir('shell-completion/bash') - subdir('doc') - -@@ -318,7 +317,9 @@ udev_rule = configure_file( - input : 'src/75-casync.rules.in', - configuration : substs) - --install_data(udev_rule, install_dir : udevrulesdir) -+if get_option('udev') -+ install_data(udev_rule, install_dir : udevrulesdir) -+endif - - ############################################################ - --- -2.25.1 - diff --git a/package/casync/casync.hash b/package/casync/casync.hash index dbb85520de..469beb5b6c 100644 --- a/package/casync/casync.hash +++ b/package/casync/casync.hash @@ -1,3 +1,3 @@ # sha256 locally computed -sha256 d07f43e70e3c466152033da4c55c065f815d3025234a046c2bce1cfe4ac7d273 casync-4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc.tar.gz +sha256 5d58def4c5ca902b35a97178d4619b9298a35b27d5748a2cc346bd36c2e38e9c casync-0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f.tar.gz sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551 LICENSE.LGPL2.1 diff --git a/package/casync/casync.mk b/package/casync/casync.mk index bb9bd8ccac..af010a7ece 100644 --- a/package/casync/casync.mk +++ b/package/casync/casync.mk @@ -4,7 +4,7 @@ # ################################################################################ -CASYNC_VERSION = 4ad9bcb94bc83ff36cfc65515107ea06a88c2dfc +CASYNC_VERSION = 0efa7abffe5fffbde8c457d3c8fafbdde0bb6e4f CASYNC_SITE = $(call github,systemd,casync,$(CASYNC_VERSION)) CASYNC_LICENSE = LGPL-2.1+ CASYNC_LICENSE_FILES = LICENSE.LGPL2.1 From thomas.petazzoni at bootlin.com Mon Oct 31 14:41:55 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:41:55 +0100 Subject: [Buildroot] [git commit] package/stress: bump to version 1.0.5 Message-ID: <20221031144227.3F2A487947@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=4022f5fe44a928c5e987f40fd4f58dd0ae5cf1fb branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Switch to an active fork: "The original stress went unmaintained; the source of the last version, 1.0.4, was imported from Debian. After, patches from Debian and other changes were applied to create the 1.0.5 release. The details of each release are registered in the ChangeLog file. Now, stress is maintained by volunteers under Resurrecting Open Source Projects." https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog Signed-off-by: Fabrice Fontaine Signed-off-by: Thomas Petazzoni --- package/stress/Config.in | 2 +- package/stress/stress.hash | 3 +-- package/stress/stress.mk | 6 ++++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/package/stress/Config.in b/package/stress/Config.in index b22c3f19bb..32a3e264bc 100644 --- a/package/stress/Config.in +++ b/package/stress/Config.in @@ -6,4 +6,4 @@ config BR2_PACKAGE_STRESS It imposes a configurable amount of CPU, memory, I/O, and disk stress on the system. - http://people.seas.harvard.edu/~apw/stress/ + https://github.com/resurrecting-open-source-projects/stress/ diff --git a/package/stress/stress.hash b/package/stress/stress.hash index 8d14d053fb..dc1785b6c7 100644 --- a/package/stress/stress.hash +++ b/package/stress/stress.hash @@ -1,4 +1,3 @@ -# Locally calculated after checking pgp signature -sha256 057e4fc2a7706411e1014bf172e4f94b63a12f18412378fca8684ca92408825b stress-1.0.4.tar.gz # Locally computed +sha256 1798e49ca365d928fb194ba1b8e8d1e09963b49e9edb0a78bcbba15750bb5027 stress-1.0.5.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/stress/stress.mk b/package/stress/stress.mk index 4d2d4cb838..99a50f349e 100644 --- a/package/stress/stress.mk +++ b/package/stress/stress.mk @@ -4,10 +4,12 @@ # ################################################################################ -STRESS_VERSION = 1.0.4 -STRESS_SITE = http://people.seas.harvard.edu/~apw/stress +STRESS_VERSION = 1.0.5 +STRESS_SITE = $(call github,resurrecting-open-source-projects,stress,$(STRESS_VERSION)) STRESS_LICENSE = GPL-2.0+ STRESS_LICENSE_FILES = COPYING +# From git +STRESS_AUTORECONF = YES # Stress is linked statically if the --enable-static is specified. # However, this option is always specified in the global From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:08 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:08 +0100 Subject: [Buildroot] [PATCH 1/1] package/python-setuptools: bump to version 65.5.0 In-Reply-To: <20221019194613.145290-1-james.hilliard1@gmail.com> References: <20221019194613.145290-1-james.hilliard1@gmail.com> Message-ID: <20221031154308.7f627e75@windsurf> On Wed, 19 Oct 2022 13:46:13 -0600 James Hilliard wrote: > Signed-off-by: James Hilliard > --- > package/python-setuptools/python-setuptools.hash | 4 ++-- > package/python-setuptools/python-setuptools.mk | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:19 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:19 +0100 Subject: [Buildroot] [PATCH 1/1] package/valijson: bump to version 0.7 In-Reply-To: <20221022204144.137169-1-fontaine.fabrice@gmail.com> References: <20221022204144.137169-1-fontaine.fabrice@gmail.com> Message-ID: <20221031154319.5b6cb293@windsurf> On Sat, 22 Oct 2022 22:41:44 +0200 Fabrice Fontaine wrote: > https://github.com/tristanpenman/valijson/releases/tag/v0.7 > > Signed-off-by: Fabrice Fontaine > --- > package/valijson/valijson.hash | 2 +- > package/valijson/valijson.mk | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:28 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:28 +0100 Subject: [Buildroot] [PATCH 1/1] package/stress: bump to version 1.0.5 In-Reply-To: <20221022211858.166130-1-fontaine.fabrice@gmail.com> References: <20221022211858.166130-1-fontaine.fabrice@gmail.com> Message-ID: <20221031154328.36373f6b@windsurf> On Sat, 22 Oct 2022 23:18:58 +0200 Fabrice Fontaine wrote: > Switch to an active fork: > > "The original stress went unmaintained; the source of the last version, > 1.0.4, was imported from Debian. After, patches from Debian and other > changes were applied to create the 1.0.5 release. The details of each > release are registered in the ChangeLog file. Now, stress is maintained > by volunteers under Resurrecting Open Source Projects." > > https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog > > Signed-off-by: Fabrice Fontaine > --- > package/stress/Config.in | 2 +- > package/stress/stress.hash | 3 +-- > package/stress/stress.mk | 6 ++++-- > 3 files changed, 6 insertions(+), 5 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:36 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:36 +0100 Subject: [Buildroot] [PATCH 1/1] package/casync: bump to latest git commit (0efa7abffe5f) In-Reply-To: References: Message-ID: <20221031154336.054f589b@windsurf> On Sun, 23 Oct 2022 07:04:28 +0000 Yair Ben-Avraham via buildroot wrote: > Drop patches (merged to main) > > Signed-off-by: Yair Ben-Avraham > --- > ...castore-fix-build-without-lzma-or-xz.patch | 35 ------------ > ...tall-udev-rules-without-udev-support.patch | 53 ------------------- > package/casync/casync.hash | 2 +- > package/casync/casync.mk | 2 +- > 4 files changed, 2 insertions(+), 90 deletions(-) > delete mode 100644 package/casync/0001-castore-fix-build-without-lzma-or-xz.patch > delete mode 100644 package/casync/0002-build-don-t-install-udev-rules-without-udev-support.patch Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 14:43:46 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 15:43:46 +0100 Subject: [Buildroot] [PATCH] package/lua-lyaml: bump to version 6.2.8 In-Reply-To: <20221023071946.433502-1-francois.perrad@gadz.org> References: <20221023071946.433502-1-francois.perrad@gadz.org> Message-ID: <20221031154346.0b854452@windsurf> On Sun, 23 Oct 2022 09:19:46 +0200 Francois Perrad wrote: > diff LICENCE: > -Copyright (C) 2013-2020 Gary V. Vaughan > +Copyright (C) 2013-2022 Gary V. Vaughan > > Signed-off-by: Francois Perrad > --- > package/lua-lyaml/lua-lyaml.hash | 4 ++-- > package/lua-lyaml/lua-lyaml.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From tim.gover at raspberrypi.com Mon Oct 31 15:02:01 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 15:02:01 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README In-Reply-To: <20221031131444.GD1058960@scaer> References: <20221031114643.6648-1-tim.gover@raspberrypi.com> <20221031123928.GB1058960@scaer> <20221031131444.GD1058960@scaer> Message-ID: On Mon, 31 Oct 2022 at 13:14, Yann E. MORIN wrote: > > Tim, All, > > On 2022-10-31 12:52 +0000, Tim Gover spake thusly: > > On Mon, 31 Oct 2022 at 12:39, Yann E. MORIN wrote: > > > On 2022-10-31 11:46 +0000, Tim Gover spake thusly: > > > > If a custom os_prefix directory is specified then the Raspberry Pi > > > > firmware probes for the README file in overlays directory. > > > > Since the README file is small let's include it, otherwise, > > > 197KiB is _not_ small. In fact, the README is bigger than every dtbo, > > > and accounts for ~25% of the size of all dtbo combined. > > Good point. Would you be happy with simply creating an empty or small > > README file (a note indicating the purpose of the file) ? > > Just touching the README should be enough I would say. > > > > > the firmware won't recognize the overlays directory if the user > > > > later moves it to an os_prefix specific sub-directory. > > > What is the goal here, in the context of Buildroot, where we only > > > install one set of overlays? > > > If a user moved the overlays, they already have a script that does that, > > > so they should also ensure that script properly prepares config.txt to > > > specify the proper os_prefix, and so it is just a matter of adding a > > > 'touch' on the README in the same script. > > It's fairly common for non-expert users to modify the output of a > > buildroot image > > without re-building the image themselves. Adding a README file reduces > > the risk of them being tripped up by this difference in behaviour. > > So, if I read you correctly: non-expert users know they can move the > overlays to a sub-dir; they also know they have to set the os_prefix > accordingly in config.txt; but they don't know they have to create a > README in there? ;-) We've found that many industrial customers prototype their software on Raspberry Pi OS before using Buildroot or Yocto to create a dedicated OS image. Using os_prefix + a GPIO conditional is a common pattern and it would be nice if this worked as easily on buildroot as elsewhere. I've resubmitted the patch with a zero byte README. If anyone wants to create a really small image then they would remove unused .dtbo files or just have a fixed DTB. Therefore, I think the overhead of having a single empty README file should be acceptable. > > Sorry, I am still unconvinced. > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From tim.gover at raspberrypi.com Mon Oct 31 15:02:35 2022 From: tim.gover at raspberrypi.com (Tim Gover) Date: Mon, 31 Oct 2022 15:02:35 +0000 Subject: [Buildroot] [PATCH 1/1] package/rpi-firmware: add overlays/README Message-ID: <20221031150235.12074-1-tim.gover@raspberrypi.com> If a custom os_prefix directory is specified then the Raspberry Pi firmware probes for the README file in overlays directory. If this is not found then firmware will use the top-level overlays directory which can be confusing if os_prefix is used in conjunction with other filters to implement alternate boot behaviour. In Raspberry Pi OS the README file is always included to ensure that the relevant documenation is in sync with the overlays. Rather that including the entire file let's just include an emtpy file so that overlays directory is consistent with the Raspberry Pi OS APT package. From https://www.raspberrypi.com/documentation/computers/config_txt.html#overlay_prefix Unless ${os_prefix}${overlay_prefix}README exists, overlays are shared with the main OS (i.e. os_prefix is ignored). Signed-off-by: Tim Gover --- package/rpi-firmware/rpi-firmware.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index 6f5902fd52..53d6d8ca06 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -57,6 +57,7 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS $(INSTALL) -D -m 0644 $(ovldtb) $(BINARIES_DIR)/rpi-firmware/overlays/$(notdir $(ovldtb)) ) $(INSTALL) -D -m 0644 $(@D)/boot/overlays/overlay_map.dtb $(BINARIES_DIR)/rpi-firmware/overlays/ + touch $(BINARIES_DIR)/rpi-firmware/overlays/README endef else # Still create the directory, so a genimage.cfg can include it independently of -- 2.25.1 From james.hilliard1 at gmail.com Mon Oct 31 16:14:51 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 10:14:51 -0600 Subject: [Buildroot] [PATCH v2 1/1] package/iwd: fix D-Bus bus services directory error Message-ID: <20221031161451.2604400-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, however we still need it when building with systemd so that the service directory is available via pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- Changes v1 -> v2: - depend on dbus when depending on systemd --- package/iwd/iwd.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..6e366e094d 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -31,7 +31,8 @@ endif ifeq ($(BR2_PACKAGE_SYSTEMD),y) IWD_CONF_OPTS += --enable-systemd-service -IWD_DEPENDENCIES += systemd +# Need dbus for system_bus_services_dir variable provided by dbus' .pc +IWD_DEPENDENCIES += dbus systemd else IWD_CONF_OPTS += --disable-systemd-service endif -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 16:15:38 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 12:15:38 -0400 Subject: [Buildroot] [PATCH 1/1] package/iwd: set dbus busdir In-Reply-To: <20221031081735.GK1058960@scaer> References: <20221031010904.1109541-1-james.hilliard1@gmail.com> <20221031081735.GK1058960@scaer> Message-ID: On Mon, Oct 31, 2022 at 4:17 AM Yann E. MORIN wrote: > > James, All, > > +Daniel > > On 2022-10-30 19:09 -0600, James Hilliard spake thusly: > > In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build > > dependency, as such we also need to set --with-dbus-busdir which would > > otherwise be pulled via pkg-config. > > > > Fixes: > > checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required > > I was surprised that I did not have this error locally, but it only > happens when systemd is enabled. > > So, rather than hard-code the path, I think I would prefer we add back a > buid dependency on dbus when systemd is enabled: > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > index 002988cf33..6e366e094d 100644 > --- a/package/iwd/iwd.mk > +++ b/package/iwd/iwd.mk > @@ -31,7 +31,8 @@ endif > > ifeq ($(BR2_PACKAGE_SYSTEMD),y) > IWD_CONF_OPTS += --enable-systemd-service > -IWD_DEPENDENCIES += systemd > +# Need dbus for system_bus_services_dir variable provided by dbus' .pc > +IWD_DEPENDENCIES += dbus systemd > else > IWD_CONF_OPTS += --disable-systemd-service > endif Sent as suggested in v2 patch: https://patchwork.ozlabs.org/project/buildroot/patch/20221031161451.2604400-1-james.hilliard1 at gmail.com/ > > Regards, > Yann E. MORIN. > > > Signed-off-by: James Hilliard > > --- > > package/iwd/iwd.mk | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk > > index 002988cf33..e53ae595d7 100644 > > --- a/package/iwd/iwd.mk > > +++ b/package/iwd/iwd.mk > > @@ -17,7 +17,8 @@ IWD_CONF_OPTS = \ > > --disable-manual-pages \ > > --enable-external-ell \ > > --enable-dbus-policy \ > > - --with-dbus-datadir=/usr/share > > + --with-dbus-datadir=/usr/share \ > > + --with-dbus-busdir=/usr/share/dbus-1/system-services > > IWD_DEPENDENCIES = ell > > > > ifeq ($(BR2_PACKAGE_READLINE),y) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From thomas.petazzoni at bootlin.com Mon Oct 31 17:30:22 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 18:30:22 +0100 Subject: [Buildroot] defconfig fragments In-Reply-To: References: Message-ID: <20221031183022.5c51b20b@windsurf> Hello Bassem, On Sun, 23 Oct 2022 08:04:01 +0000 Bassem Fahmy wrote: > I understand that buildroot supports config fragments for packages (that support defconfig). > > But to patch the buildroot defconfig itself, the only way I could do it, is by calling > > support/kconfig/merge_config.h xxxx_defconfig xxxx.config > > Is this the correct way? Is there a more standard way to patch a buildroot defconfig? You're correct, that's the proper way of generating a Buildroot .config from multiple fragments. Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 17:31:06 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 18:31:06 +0100 Subject: [Buildroot] [git commit] package/python-flask-jsonrpc: bump to version 2.2.2 Message-ID: <20221031173135.937578796F@busybox.osuosl.org> commit: https://git.buildroot.net/buildroot/commit/?id=73890799ee14cba1ae650f19ec7a6e4fd2dd4086 branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master Drop patch 0001 as it is not needed anymore: https://github.com/cenobites/flask-jsonrpc/commit/2426b7f6fabeef9eb3a8dc6570e2fce33a30f98e Signed-off-by: S??bastien Szymanski Signed-off-by: Thomas Petazzoni --- .../0001-Move-pytest-runner-to-tests_require.patch | 32 ---------------------- .../python-flask-jsonrpc/python-flask-jsonrpc.hash | 4 +-- .../python-flask-jsonrpc/python-flask-jsonrpc.mk | 4 +-- 3 files changed, 4 insertions(+), 36 deletions(-) diff --git a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch b/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch deleted file mode 100644 index 8b6712e601..0000000000 --- a/package/python-flask-jsonrpc/0001-Move-pytest-runner-to-tests_require.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 8f07768085fa4c8d21dbe27805b7238e67d3aea5 Mon Sep 17 00:00:00 2001 -From: James Hilliard -Date: Tue, 17 May 2022 15:52:58 -0600 -Subject: [PATCH] Move pytest-runner to tests_require - -This isn't a build requirement so it shouldn't be under -setup_requires. - -Signed-off-by: James Hilliard -[Upstream status: -https://github.com/cenobites/flask-jsonrpc/pull/227] ---- - setup.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/setup.py b/setup.py -index 197d6c9..f23c472 100755 ---- a/setup.py -+++ b/setup.py -@@ -42,8 +42,8 @@ setuptools.setup( - 'async': ['Flask[async]>=1.0.0,<3.0'], - 'dotenv': ['Flask[dotenv]>=1.0.0,<3.0'], - }, -- setup_requires=['pytest-runner'], - tests_require=[ -+ 'pytest-runner', - 'mock==4.0.3', - 'coverage==6.3.2;python_version>"3.6"', - 'coverage<6.2;python_version<="3.6"', --- -2.36.0 - diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash index ee407dbd7a..d5c0e46595 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.hash +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.hash @@ -1,6 +1,6 @@ # md5, sha256 from https://pypi.org/pypi/flask-jsonrpc/json -md5 f2b7bf5222f3aaf050f396522d7f692d Flask-JSONRPC-2.2.1.tar.gz -sha256 f994f8dd80bf31cf7272eb1a3030c6caf30fef3ced5866e66b56871d4047be68 Flask-JSONRPC-2.2.1.tar.gz +md5 fb6205e6e776802c6000ea7119229066 Flask-JSONRPC-2.2.2.tar.gz +sha256 0cb6ac2804980dc8ac7cbbc3149025f4ec9323227978a4a7ce7b55a9f8263a11 Flask-JSONRPC-2.2.2.tar.gz # Locally computed sha256 checksums sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 LICENSE sha256 5e6175926ba7dde28c7d292a8b0350aa82c40a8c5691a878fe02b0c9c6b43b39 COPYING diff --git a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk index 542b9e73f5..c816749085 100644 --- a/package/python-flask-jsonrpc/python-flask-jsonrpc.mk +++ b/package/python-flask-jsonrpc/python-flask-jsonrpc.mk @@ -4,9 +4,9 @@ # ################################################################################ -PYTHON_FLASK_JSONRPC_VERSION = 2.2.1 +PYTHON_FLASK_JSONRPC_VERSION = 2.2.2 PYTHON_FLASK_JSONRPC_SOURCE = Flask-JSONRPC-$(PYTHON_FLASK_JSONRPC_VERSION).tar.gz -PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/ca/2a/3f2bd79840d9643fc909cf27f730b2c5006351746ba09c4dab1b898ddee9 +PYTHON_FLASK_JSONRPC_SITE = https://files.pythonhosted.org/packages/a5/7b/8cbd53084a1efb58a1105905a38b0cbefcd3ae13ef2c90c07eedf0fdb6dc PYTHON_FLASK_JSONRPC_LICENSE = BSD-3-Clause PYTHON_FLASK_JSONRPC_LICENSE_FILES = LICENSE COPYING PYTHON_FLASK_JSONRPC_SETUP_TYPE = setuptools From troglobit at gmail.com Mon Oct 31 17:46:29 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:29 +0100 Subject: [Buildroot] [PATCH 0/3] package/ssdp-responder bump and check-package fixes Message-ID: <20221031174632.377586-1-troglobit@gmail.com> Hi, here's the upgrade of the ssdpd-responder package to the latest release, as of yesterday. Also included are some stilistic fixes to Config.in and the start script. The latter changes suggested by check-package and shellcheck, fixes based in part on the SMCRoute start script. Best regards /Joachim From troglobit at gmail.com Mon Oct 31 17:46:30 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:30 +0100 Subject: [Buildroot] [PATCH 1/3] package/ssdp-responder: bump to version 1.9 In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-2-troglobit@gmail.com> Changes: - New command line options to ssdp-scan - Update copyright years (affects LICENSE file hash) Fixes: - Workaround for OpenVPN /32 default server setup - Time-of-check vs time-of-use issue with caching of UUID, found by Coverity Scan, fixed by Raul Porancea Signed-off-by: Joachim Wiberg --- package/ssdp-responder/ssdp-responder.hash | 4 ++-- package/ssdp-responder/ssdp-responder.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/ssdp-responder/ssdp-responder.hash b/package/ssdp-responder/ssdp-responder.hash index e8cbbb4a1f..425ad86e08 100644 --- a/package/ssdp-responder/ssdp-responder.hash +++ b/package/ssdp-responder/ssdp-responder.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 7ae49229e7c7a55fed9e36598b12e2173eecef0fffe0a386b6a10fad30f3c79f ssdp-responder-1.8.tar.gz -sha256 e17dc0bc91bf499d8cca5e016c22c6d2a4770e3cc1a43756a7973375a83ddb90 LICENSE +sha256 974c244abd4ba8c87532867a84756182a1460c99072ffb1eb91c5a1f73311d89 ssdp-responder-1.9.tar.gz +sha256 68d6fdc22e337f725fe719bf9ae6d92b1d8d0ca4cff8219b303ab76706670a8d LICENSE diff --git a/package/ssdp-responder/ssdp-responder.mk b/package/ssdp-responder/ssdp-responder.mk index 3fee4c2006..fd7b1ea44b 100644 --- a/package/ssdp-responder/ssdp-responder.mk +++ b/package/ssdp-responder/ssdp-responder.mk @@ -4,7 +4,7 @@ # ################################################################################ -SSDP_RESPONDER_VERSION = 1.8 +SSDP_RESPONDER_VERSION = 1.9 SSDP_RESPONDER_SITE = https://github.com/troglobit/ssdp-responder/releases/download/v$(SSDP_RESPONDER_VERSION) SSDP_RESPONDER_LICENSE = ISC SSDP_RESPONDER_LICENSE_FILES = LICENSE -- 2.34.1 From troglobit at gmail.com Mon Oct 31 17:46:31 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:31 +0100 Subject: [Buildroot] [PATCH 2/3] package/ssdp-responder: minor update of help text In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-3-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/ssdp-responder/Config.in | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/package/ssdp-responder/Config.in b/package/ssdp-responder/Config.in index df57546eed..8b5dfe67a6 100644 --- a/package/ssdp-responder/Config.in +++ b/package/ssdp-responder/Config.in @@ -7,14 +7,16 @@ config BR2_PACKAGE_SSDP_RESPONDER targeted more at embedded systems that need to announce themselves to Windows systems. - ssdpd is a stand-alone UNIX, no external dependencies but the - standard C library. It has a built-in web server for serving - the UPnP XML description which Windows use to present the - icon, by default an InternetGatewayDevice is announced. + The project consists of ssdpd and ssdp-scan. The former is a + stand-alone UNIX daemon, it has no dependencies but a standard + C library. It comes with built-in web server for serving the + UPnP XML description on port 1901, the XML is used by Windows + to present the icon, by default an InternetGatewayDevice is + announced. - Also included is ssdp-scan, a tool similar to mdns-scan, which - continuously scans for SSDP capable hosts on the network. - Take care only to use for debugging since it scans the network - quite aggressively. + ssdp-scan is a tool, similar to mdns-scan, to find other SSDP + capable hosts on the network. Take care to only use it for + debugging, or quicker device discovery operations, since it + scans the network quite aggressively. https://github.com/troglobit/ssdp-responder/ -- 2.34.1 From troglobit at gmail.com Mon Oct 31 17:46:32 2022 From: troglobit at gmail.com (Joachim Wiberg) Date: Mon, 31 Oct 2022 18:46:32 +0100 Subject: [Buildroot] [PATCH 3/3] package/ssdp-responder: fix warnings from check-package and shellcheck In-Reply-To: <20221031174632.377586-1-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> Message-ID: <20221031174632.377586-4-troglobit@gmail.com> Signed-off-by: Joachim Wiberg --- package/ssdp-responder/S50ssdpd | 47 +++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 20 deletions(-) mode change 100755 => 100644 package/ssdp-responder/S50ssdpd diff --git a/package/ssdp-responder/S50ssdpd b/package/ssdp-responder/S50ssdpd old mode 100755 new mode 100644 index e33992be91..6874fdbb70 --- a/package/ssdp-responder/S50ssdpd +++ b/package/ssdp-responder/S50ssdpd @@ -1,25 +1,32 @@ #!/bin/sh -NAME=ssdpd -PIDFILE=/var/run/$NAME.pid -DAEMON=/usr/sbin/$NAME -CFGFILE=/etc/default/$NAME +DAEMON=ssdpd +PIDFILE=/var/run/$DAEMON.pid +CFGFILE=/etc/default/$DAEMON DAEMON_ARGS="" # Read configuration variable file if it is present -[ -f $CFGFILE ] && . $CFGFILE +# shellcheck source=/dev/null +[ -r "$CFGFILE" ] && . "$CFGFILE" + +cmd() +{ + start-stop-daemon -q -p "$PIDFILE" -x "$DAEMON" "$@" + status=$? + [ $status -eq 0 ] && echo "OK" || echo "FAIL" + + return $status +} start() { - printf 'Starting %s: ' "$NAME" - start-stop-daemon -S -q -p $PIDFILE -x $DAEMON -- $DAEMON_ARGS - [ $? = 0 ] && echo "OK" || echo "FAIL" + printf 'Starting %s: ' "$DAEMON" + cmd -S -- "$DAEMON_ARGS" } stop() { - printf 'Stopping %s: ' "$NAME" - start-stop-daemon -K -q -p $PIDFILE -x $DAEMON - [ $? = 0 ] && echo "OK" || echo "FAIL" + printf 'Stopping %s: ' "$DAEMON" + cmd -K } restart() { @@ -28,15 +35,15 @@ restart() { } case "$1" in - start|stop|restart) - "$1" - ;; - reload) - restart - ;; - *) - echo "Usage: $0 {start|stop|restart|reload}" - exit 1 + start|stop|restart) + "$1" + ;; + reload) + restart + ;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 esac exit $? -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 17:49:59 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 11:49:59 -0600 Subject: [Buildroot] [PATCH v3 1/1] package/iwd: add dbus compile time dependency Message-ID: <20221031174959.604094-1-james.hilliard1@gmail.com> In 5b3b2d80f4cf586d360ff696c3dacbd4cb48fdc4 we dropped dbus as a build dependency, however we still need it when building with systemd so that the service directory is available via pkg-config. In addition we can drop --with-dbus-datadir by unconditionally requiring dbus as the datadir will then be fetched from pkg-config. Fixes: checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required Signed-off-by: James Hilliard --- Changes v2 -> v3: - always depend on dbus Changes v1 -> v2: - depend on dbus when depending on systemd --- package/iwd/iwd.mk | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/package/iwd/iwd.mk b/package/iwd/iwd.mk index 002988cf33..5ffbde334e 100644 --- a/package/iwd/iwd.mk +++ b/package/iwd/iwd.mk @@ -16,9 +16,8 @@ IWD_SELINUX_MODULES = networkmanager IWD_CONF_OPTS = \ --disable-manual-pages \ --enable-external-ell \ - --enable-dbus-policy \ - --with-dbus-datadir=/usr/share -IWD_DEPENDENCIES = ell + --enable-dbus-policy +IWD_DEPENDENCIES = dbus ell ifeq ($(BR2_PACKAGE_READLINE),y) # iwd client depends on readline (GPL-3.0+) -- 2.34.1 From james.hilliard1 at gmail.com Mon Oct 31 18:08:31 2022 From: james.hilliard1 at gmail.com (James Hilliard) Date: Mon, 31 Oct 2022 14:08:31 -0400 Subject: [Buildroot] [PATCH 1/7] package/python-pluggy: enable host package build In-Reply-To: <20221030202718.GG1058960@scaer> References: <20221019215348.3262192-1-james.hilliard1@gmail.com> <20221030202718.GG1058960@scaer> Message-ID: On Sun, Oct 30, 2022 at 4:27 PM Yann E. MORIN wrote: > > James, All, > > On 2022-10-19 15:53 -0600, James Hilliard spake thusly: > > This will be needed for the upcoming host-python-hatchling. > > > > Signed-off-by: James Hilliard > > Whole series applied to master, thanks. > > I really wonder how many pep517 buildsystems there will be, and how many > packages we'll have to introduce... Fantastic... Considering pep517 seems to have been designed to make it easy for everyone to write their own pep517 build backends...could be quite a few...yeah... > > Regards, > Yann E. MORIN. > > > --- > > package/python-pluggy/python-pluggy.mk | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/package/python-pluggy/python-pluggy.mk b/package/python-pluggy/python-pluggy.mk > > index 59382518ed..6dc6f970ea 100644 > > --- a/package/python-pluggy/python-pluggy.mk > > +++ b/package/python-pluggy/python-pluggy.mk > > @@ -11,5 +11,7 @@ PYTHON_PLUGGY_SETUP_TYPE = setuptools > > PYTHON_PLUGGY_LICENSE = MIT > > PYTHON_PLUGGY_LICENSE_FILES = LICENSE > > PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > +HOST_PYTHON_PLUGGY_DEPENDENCIES = host-python-setuptools-scm > > > > $(eval $(python-package)) > > +$(eval $(host-python-package)) > > -- > > 2.34.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' From bernd.kuhls at t-online.de Mon Oct 31 18:25:16 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:16 +0100 Subject: [Buildroot] [PATCH 2/3] package/monero: new package In-Reply-To: <20221031182517.263500-1-bernd.kuhls@t-online.de> References: <20221031182517.263500-1-bernd.kuhls@t-online.de> Message-ID: <20221031182517.263500-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + package/Config.in | 1 + .../monero/0001-disable-stack-protector.patch | 22 ++++ package/monero/0002-system-miniupnpc.patch | 112 ++++++++++++++++++ ...lation-and-JIT-support-on-aarch64_be.patch | 28 +++++ package/monero/Config.in | 35 ++++++ package/monero/monero.hash | 3 + package/monero/monero.mk | 55 +++++++++ 8 files changed, 257 insertions(+) create mode 100644 package/monero/0001-disable-stack-protector.patch create mode 100644 package/monero/0002-system-miniupnpc.patch create mode 100644 package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch create mode 100644 package/monero/Config.in create mode 100644 package/monero/monero.hash create mode 100644 package/monero/monero.mk diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..7db7954871 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -407,6 +407,7 @@ F: package/libyuv/ F: package/mesa3d/ F: package/minidlna/ F: package/mjpg-streamer/ +F: package/monero/ F: package/nut/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ diff --git a/package/Config.in b/package/Config.in index fff8186351..ac811bf2e4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2179,6 +2179,7 @@ menu "Miscellaneous" source "package/haveged/Config.in" source "package/linux-syscall-support/Config.in" source "package/mobile-broadband-provider-info/Config.in" + source "package/monero/Config.in" source "package/netdata/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" diff --git a/package/monero/0001-disable-stack-protector.patch b/package/monero/0001-disable-stack-protector.patch new file mode 100644 index 0000000000..0407b4e32d --- /dev/null +++ b/package/monero/0001-disable-stack-protector.patch @@ -0,0 +1,22 @@ +Disable unconditional stack-protector support + +Signed-off-by: Bernd Kuhls + +diff -uNr monero-source-v0.18.1.0.orig/CMakeLists.txt monero-source-v0.18.1.0/CMakeLists.txt +--- monero-source-v0.18.1.0.orig/CMakeLists.txt 2022-08-10 05:34:23.000000000 +0200 ++++ monero-source-v0.18.1.0/CMakeLists.txt 2022-08-15 18:40:52.240699837 +0200 +@@ -831,14 +831,6 @@ + add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS) + add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS) + +- # -fstack-protector +- if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) +- add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS) +- add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS) +- endif() +- + # New in GCC 8.2 + if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) + add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS) diff --git a/package/monero/0002-system-miniupnpc.patch b/package/monero/0002-system-miniupnpc.patch new file mode 100644 index 0000000000..e12d9302bd --- /dev/null +++ b/package/monero/0002-system-miniupnpc.patch @@ -0,0 +1,112 @@ +Add support for miniupnpc system library + +Downloaded from +https://git.alpinelinux.org/aports/plain/community/monero/system-miniupnpc.patch + +Signed-off-by: Bernd Kuhls + +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -676,6 +676,14 @@ + include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations") + add_subdirectory(external) + ++# Final setup for miniupnpc ++if(UPNP_STATIC OR IOS) ++ add_definitions("-DUPNP_STATIC") ++else() ++ add_definitions("-DUPNP_DYNAMIC") ++ include_directories(${UPNP_INCLUDE}) ++endif() ++ + # Final setup for libunbound + include_directories(${UNBOUND_INCLUDE_DIR}) + +diff --git a/src/p2p/net_node.inl b/src/p2p/net_node.inl +index 9b21705e..76340a22 100644 +--- a/src/p2p/net_node.inl ++++ b/src/p2p/net_node.inl +@@ -60,9 +60,16 @@ + #include "cryptonote_core/cryptonote_core.h" + #include "net/parse.h" + +-#include +-#include +-#include ++// We have to look for miniupnpc headers in different places, dependent on if its compiled or external ++#ifdef UPNP_STATIC ++ #include ++ #include ++ #include ++#else ++ #include "miniupnpc.h" ++ #include "upnpcommands.h" ++ #include "upnperrors.h" ++#endif + + #undef MONERO_DEFAULT_LOG_CATEGORY + #define MONERO_DEFAULT_LOG_CATEGORY "net.p2p" +-- +2.17.0 + +--- a/external/CMakeLists.txt 2021-12-04 03:56:51.405517304 +0200 ++++ b/external/CMakeLists.txt 2021-12-04 04:02:37.649484660 +0200 +@@ -34,24 +34,46 @@ + # We always compile if we are building statically to reduce static dependency issues... + # ...except for FreeBSD, because FreeBSD is a special case that doesn't play well with + # others. ++if(NOT IOS) ++ find_package(Miniupnpc QUIET) ++endif() + +-find_package(Miniupnpc REQUIRED) +- +-message(STATUS "Using in-tree miniupnpc") +-set(UPNPC_NO_INSTALL TRUE CACHE BOOL "Disable miniupnp installation" FORCE) +-add_subdirectory(miniupnp/miniupnpc) +-set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") +-set_property(TARGET libminiupnpc-static PROPERTY POSITION_INDEPENDENT_CODE ON) +-if(MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") +-elseif(NOT MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++# If we have the correct shared version and we're not building static, use it ++if(STATIC OR IOS) ++ set(USE_SHARED_MINIUPNPC false) ++elseif(MINIUPNP_FOUND AND MINIUPNPC_VERSION_1_7_OR_HIGHER) ++ set(USE_SHARED_MINIUPNPC true) + endif() ++ ++ ++if(USE_SHARED_MINIUPNPC) ++ message(STATUS "Using shared miniupnpc found at ${MINIUPNP_INCLUDE_DIR}") ++ ++ set(UPNP_STATIC false PARENT_SCOPE) ++ set(UPNP_INCLUDE ${MINIUPNP_INCLUDE_DIR} PARENT_SCOPE) ++ set(UPNP_LIBRARIES ${MINIUPNP_LIBRARY} PARENT_SCOPE) ++else() ++ if(STATIC) ++ message(STATUS "Using miniupnpc from local source tree for static build") ++ else() ++ message(STATUS "Using miniupnpc from local source tree (/external/miniupnp/miniupnpc)") ++ endif() ++ add_subdirectory(miniupnp/miniupnpc) ++ ++ set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") ++ if(MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") ++ elseif(NOT MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++ endif() ++ + if(CMAKE_SYSTEM_NAME MATCHES "NetBSD") + set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -D_NETBSD_SOURCE") + endif() + +-set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++ set(UPNP_STATIC true PARENT_SCOPE) ++ set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++endif() + + find_package(Unbound) + diff --git a/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch b/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch new file mode 100644 index 0000000000..e15ebc127a --- /dev/null +++ b/package/monero/0003-Fix-compilation-and-JIT-support-on-aarch64_be.patch @@ -0,0 +1,28 @@ +From 1e5f48aa9dcb8c17b645fa09544da08c7c9be432 Mon Sep 17 00:00:00 2001 +From: Bernd Kuhls +Date: Mon, 31 Oct 2022 19:11:37 +0100 +Subject: [PATCH] Fix compilation and JIT support on aarch64_be + +Patch sent upstream: https://github.com/tevador/RandomX/pull/257 + +Signed-off-by: Bernd Kuhls +--- + external/randomx/CMakeLists.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 4b6ba9e..2812449 100644 +--- a/external/randomx/CMakeLists.txt ++++ b/external/randomx/CMakeLists.txt +@@ -150,7 +150,7 @@ if(ARCH_ID STREQUAL "ppc64" OR ARCH_ID STREQUAL "ppc64le") + endif() + + # ARMv8 +-if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") ++if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "aarch64_be" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") + list(APPEND randomx_sources + src/jit_compiler_a64_static.S + src/jit_compiler_a64.cpp) +-- +2.34.1 + diff --git a/package/monero/Config.in b/package/monero/Config.in new file mode 100644 index 0000000000..c18d54e684 --- /dev/null +++ b/package/monero/Config.in @@ -0,0 +1,35 @@ +config BR2_PACKAGE_MONERO + bool "monero" + depends on !BR2_i386 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem + # monero needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + select BR2_PACKAGE_BOOST + select BR2_PACKAGE_BOOST_CHRONO + select BR2_PACKAGE_BOOST_DATE_TIME + select BR2_PACKAGE_BOOST_FILESYSTEM + select BR2_PACKAGE_BOOST_LOCALE + select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS + select BR2_PACKAGE_BOOST_REGEX + select BR2_PACKAGE_BOOST_SERIALIZATION + select BR2_PACKAGE_BOOST_SYSTEM + select BR2_PACKAGE_BOOST_THREAD + select BR2_PACKAGE_CZMQ + select BR2_PACKAGE_LIBMINIUPNPC + select BR2_PACKAGE_LIBSODIUM + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_UNBOUND + help + The secure, private, untraceable cryptocurrency + + https://getmonero.org/ + +comment "monero needs a glibc or musl toolchain w/ C++, dynamic library, threads" + depends on !BR2_i386 + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS + depends on BR2_TOOLCHAIN_USES_UCLIBC || \ + !BR2_INSTALL_LIBSTDCPP || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_HAS_THREADS diff --git a/package/monero/monero.hash b/package/monero/monero.hash new file mode 100644 index 0000000000..91f452cbec --- /dev/null +++ b/package/monero/monero.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 0b667acba2223f8f082b388d7ceb5d212e0515b8a94395f3ec69183ef4bebf6c monero-source-v0.18.1.2.tar.bz2 +sha256 c2fe351163f4e0cee45d38e9481f2ea60f3cb77b24f818c4a2c740383f2f4cb2 LICENSE diff --git a/package/monero/monero.mk b/package/monero/monero.mk new file mode 100644 index 0000000000..ee215f90e1 --- /dev/null +++ b/package/monero/monero.mk @@ -0,0 +1,55 @@ +################################################################################ +# +# monero +# +################################################################################ + +MONERO_VERSION = 0.18.1.2 +MONERO_SOURCE = monero-source-v$(MONERO_VERSION).tar.bz2 +MONERO_SITE = https://downloads.getmonero.org/cli +MONERO_LICENSE = MIT +MONERO_LICENSE_FILES = LICENSE +MONERO_CONF_OPTS = \ + -DBUILD_DOCUMENTATION=OFF \ + -DCMAKE_CXX_FLAGS="$(MONERO_CXXFLAGS)" \ + -DCMAKE_BUILD_TYPE=None \ + -DMANUAL_SUBMODULES=ON \ + -DSTACK_TRACE=OFF \ + -DUSE_CCACHE=OFF \ + -DUSE_DEVICE_TREZOR=OFF +MONERO_DEPENDENCIES = \ + boost \ + czmq \ + libminiupnpc \ + libsodium \ + openssl \ + unbound + +ifeq ($(BR2_aarch64_be)$(BR2_mips)$(BR2_mipsel)$(BR2_mips64el)$(BR2_sparc64),y) +MONERO_CONF_OPTS += -DNO_AES=ON +endif + +MONERO_CXXFLAGS = $(TARGET_CXXFLAGS) -std=c++11 + +# Uses __atomic_load_8 +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +MONERO_CXXFLAGS += -latomic +endif + +# relocation truncated to fit: R_MIPS_GOT16 +ifeq ($(BR2_mipsel),y) +MONERO_CXXFLAGS += -mxgot +endif + +ifeq ($(BR2_PACKAGE_HIDAPI),y) +MONERO_DEPENDENCIES += hidapi +endif + +ifeq ($(BR2_PACKAGE_READLINE),y) +MONERO_CONF_OPTS += -DUSE_READLINE=ON +MONERO_DEPENDENCIES += readline +else +MONERO_CONF_OPTS += -DUSE_READLINE=OFF +endif + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:25:15 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:15 +0100 Subject: [Buildroot] [PATCH 1/3] package/unbound: install to staging Message-ID: <20221031182517.263500-1-bernd.kuhls@t-online.de> Needed for Monero: https://github.com/monero-project/monero/blob/release-v0.18/cmake/FindUnbound.cmake Signed-off-by: Bernd Kuhls --- package/unbound/unbound.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index d86d9c2067..7b62522727 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -6,6 +6,7 @@ UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_INSTALL_STAGING = YES UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause UNBOUND_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:25:17 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:25:17 +0100 Subject: [Buildroot] [PATCH 3/3] package/p2pool: new package In-Reply-To: <20221031182517.263500-1-bernd.kuhls@t-online.de> References: <20221031182517.263500-1-bernd.kuhls@t-online.de> Message-ID: <20221031182517.263500-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- DEVELOPERS | 1 + package/Config.in | 1 + ...lation-and-JIT-support-on-aarch64_be.patch | 28 +++++++++++++++++++ package/p2pool/Config.in | 25 +++++++++++++++++ package/p2pool/p2pool.hash | 3 ++ package/p2pool/p2pool.mk | 27 ++++++++++++++++++ 6 files changed, 85 insertions(+) create mode 100644 package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch create mode 100644 package/p2pool/Config.in create mode 100644 package/p2pool/p2pool.hash create mode 100644 package/p2pool/p2pool.mk diff --git a/DEVELOPERS b/DEVELOPERS index 7db7954871..3a2a15216e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -409,6 +409,7 @@ F: package/minidlna/ F: package/mjpg-streamer/ F: package/monero/ F: package/nut/ +F: package/p2pool/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ F: package/perl-crypt-openssl-rsa/ diff --git a/package/Config.in b/package/Config.in index ac811bf2e4..d14e7473b6 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2181,6 +2181,7 @@ menu "Miscellaneous" source "package/mobile-broadband-provider-info/Config.in" source "package/monero/Config.in" source "package/netdata/Config.in" + source "package/p2pool/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" source "package/qpdf/Config.in" diff --git a/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch b/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch new file mode 100644 index 0000000000..4109856234 --- /dev/null +++ b/package/p2pool/0001-Fix-compilation-and-JIT-support-on-aarch64_be.patch @@ -0,0 +1,28 @@ +From 1e5f48aa9dcb8c17b645fa09544da08c7c9be432 Mon Sep 17 00:00:00 2001 +From: Bernd Kuhls +Date: Mon, 31 Oct 2022 19:11:37 +0100 +Subject: [PATCH] Fix compilation and JIT support on aarch64_be + +Patch sent upstream: https://github.com/tevador/RandomX/pull/257 + +Signed-off-by: Bernd Kuhls +--- + external/src/RandomX/CMakeLists.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 4b6ba9e..2812449 100644 +--- a/external/src/RandomX/CMakeLists.txt ++++ b/external/src/RandomX/CMakeLists.txt +@@ -150,7 +150,7 @@ if(ARCH_ID STREQUAL "ppc64" OR ARCH_ID STREQUAL "ppc64le") + endif() + + # ARMv8 +-if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") ++if(ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "aarch64_be" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a") + list(APPEND randomx_sources + src/jit_compiler_a64_static.S + src/jit_compiler_a64.cpp) +-- +2.34.1 + diff --git a/package/p2pool/Config.in b/package/p2pool/Config.in new file mode 100644 index 0000000000..5717033748 --- /dev/null +++ b/package/p2pool/Config.in @@ -0,0 +1,25 @@ +config BR2_PACKAGE_P2POOL + bool "p2pool" + depends on BR2_ARCH_IS_64 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS # libuv + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libuv + depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # libuv + # p2pool needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + depends on BR2_USE_MMU # libuv + select BR2_PACKAGE_LIBCURL + select BR2_PACKAGE_LIBUV + select BR2_PACKAGE_ZEROMQ + help + Decentralized pool for Monero mining + + https://p2pool.io/ + +comment "monero needs a glibc or musl toolchain w/ C++, NPTL, dynamic library" + depends on BR2_ARCH_IS_64 + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ + BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/p2pool/p2pool.hash b/package/p2pool/p2pool.hash new file mode 100644 index 0000000000..b2d2ebd195 --- /dev/null +++ b/package/p2pool/p2pool.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 ba00735eb0b6bd357c041492d2c8b76e9b39d397123611c4f32412e65d8aafca p2pool-v2.4-br1.tar.gz +sha256 605e9047a563c5c8396ffb18232aa4304ec56586aee537c45064c6fb425e44ad LICENSE diff --git a/package/p2pool/p2pool.mk b/package/p2pool/p2pool.mk new file mode 100644 index 0000000000..75b3409b19 --- /dev/null +++ b/package/p2pool/p2pool.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# p2pool +# +################################################################################ + +P2POOL_VERSION = v2.4 +P2POOL_SITE_METHOD = git +P2POOL_SITE = https://github.com/SChernykh/p2pool.git +P2POOL_GIT_SUBMODULES = YES +P2POOL_LICENSE = GPL-3.0+ +P2POOL_LICENSE_FILES = LICENSE +P2POOL_DEPENDENCIES = libcurl libuv zeromq + +# prevent compiler warnings being treated as errors +define P2POOL_REMOVE_WARNING_FLAGS + $(SED) '/set(WARNING_FLAGS/d' $(@D)/cmake/flags.cmake +endef +P2POOL_POST_PATCH_HOOKS += P2POOL_REMOVE_WARNING_FLAGS + +# Upstream provides no installation rule: +# *** No rule to make target 'install/fast'. Stop. +define P2POOL_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/p2pool $(TARGET_DIR)/usr/bin/p2pool +endef + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 18:41:45 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 19:41:45 +0100 Subject: [Buildroot] [PATCH 1/1] package/xmrig: bump version to 6.18.1 Message-ID: <20221031184145.321293-1-bernd.kuhls@t-online.de> Changelog: https://github.com/xmrig/xmrig/blob/master/CHANGELOG.md Signed-off-by: Bernd Kuhls --- package/xmrig/xmrig.hash | 2 +- package/xmrig/xmrig.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/xmrig/xmrig.hash b/package/xmrig/xmrig.hash index 5b9d4402b5..3c50faf23f 100644 --- a/package/xmrig/xmrig.hash +++ b/package/xmrig/xmrig.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 4531a31c0c095fcae18fdef0157f1e2a6694408abbcff6789c8f3cd6ab2c3ca0 xmrig-6.18.0.tar.gz +sha256 f97fe20248e0eb452f77e9b69f2fb1510b852152b3af4f9a8b20680c854888d1 xmrig-6.18.1.tar.gz sha256 589ed823e9a84c56feb95ac58e7cf384626b9cbf4fda2a907bc36e103de1bad2 LICENSE diff --git a/package/xmrig/xmrig.mk b/package/xmrig/xmrig.mk index 40db428b56..ca5bcecfbe 100644 --- a/package/xmrig/xmrig.mk +++ b/package/xmrig/xmrig.mk @@ -4,7 +4,7 @@ # ################################################################################ -XMRIG_VERSION = 6.18.0 +XMRIG_VERSION = 6.18.1 XMRIG_SITE = $(call github,xmrig,xmrig,v$(XMRIG_VERSION)) XMRIG_LICENSE = GPL-3.0+ XMRIG_LICENSE_FILES = LICENSE -- 2.34.1 From christian at paral.in Mon Oct 31 18:55:14 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 11:55:14 -0700 Subject: [Buildroot] [PATCH v1 1/1] package/cni-plugins: new package In-Reply-To: <20221031114444.283e4776@windsurf> References: <20220821053547.667311-1-christian@paral.in> <20221031114444.283e4776@windsurf> Message-ID: Hi Thomas, On Mon, Oct 31, 2022, 3:44 AM Thomas Petazzoni wrote: > > +define CNI_PLUGINS_INSTALL_TARGET_CMDS > > + $(INSTALL) -d -m 0755 $(TARGET_DIR)/opt/cni/bin > > + $(foreach d,$(CNI_PLUGINS_INSTALL_BINS),\ > > + $(INSTALL) -D -m 0755 $(@D)/bin/$$(basename $(d)) \ > > + $(TARGET_DIR)/opt/cni/bin > > I kept it like this, but it's fairly unusual to install stuff in /opt. > Is this the normal location for these plugins? Shouldn't they go in > /usr/libexec/cni/, or something like that? > https://github.com/containerd/containerd/blob/main/script/setup/install-cni#L25 Every doc and script I've seen installs to /opt - which is why I followed that pattern. Best, Christian Stewart -------------- next part -------------- An HTML attachment was scrubbed... URL: From bernd.kuhls at t-online.de Mon Oct 31 19:52:03 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:03 +0100 Subject: [Buildroot] [PATCH v2 1/3] package/unbound: install to staging Message-ID: <20221031195205.429257-1-bernd.kuhls@t-online.de> Needed for Monero: https://github.com/monero-project/monero/blob/release-v0.18/cmake/FindUnbound.cmake Signed-off-by: Bernd Kuhls --- v2: no changes package/unbound/unbound.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/package/unbound/unbound.mk b/package/unbound/unbound.mk index d86d9c2067..7b62522727 100644 --- a/package/unbound/unbound.mk +++ b/package/unbound/unbound.mk @@ -6,6 +6,7 @@ UNBOUND_VERSION = 1.17.0 UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_INSTALL_STAGING = YES UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl UNBOUND_LICENSE = BSD-3-Clause UNBOUND_LICENSE_FILES = LICENSE -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 19:52:05 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:05 +0100 Subject: [Buildroot] [PATCH v2 3/3] package/p2pool: new package In-Reply-To: <20221031195205.429257-1-bernd.kuhls@t-online.de> References: <20221031195205.429257-1-bernd.kuhls@t-online.de> Message-ID: <20221031195205.429257-3-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- v2: disabled support for BR2_aarch64_be, not supported upstream: https://github.com/tevador/RandomX/pull/257 DEVELOPERS | 1 + package/Config.in | 1 + package/p2pool/Config.in | 27 +++++++++++++++++++++++++++ package/p2pool/p2pool.hash | 3 +++ package/p2pool/p2pool.mk | 27 +++++++++++++++++++++++++++ 5 files changed, 59 insertions(+) create mode 100644 package/p2pool/Config.in create mode 100644 package/p2pool/p2pool.hash create mode 100644 package/p2pool/p2pool.mk diff --git a/DEVELOPERS b/DEVELOPERS index 7db7954871..3a2a15216e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -409,6 +409,7 @@ F: package/minidlna/ F: package/mjpg-streamer/ F: package/monero/ F: package/nut/ +F: package/p2pool/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ F: package/perl-crypt-openssl-rsa/ diff --git a/package/Config.in b/package/Config.in index ac811bf2e4..d14e7473b6 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2181,6 +2181,7 @@ menu "Miscellaneous" source "package/mobile-broadband-provider-info/Config.in" source "package/monero/Config.in" source "package/netdata/Config.in" + source "package/p2pool/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" source "package/qpdf/Config.in" diff --git a/package/p2pool/Config.in b/package/p2pool/Config.in new file mode 100644 index 0000000000..53f894e309 --- /dev/null +++ b/package/p2pool/Config.in @@ -0,0 +1,27 @@ +config BR2_PACKAGE_P2POOL + bool "p2pool" + depends on BR2_ARCH_IS_64 + depends on !BR2_aarch64_be + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS # libuv + depends on BR2_TOOLCHAIN_HAS_SYNC_4 # libuv + depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # libuv + # p2pool needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + depends on BR2_USE_MMU # libuv + select BR2_PACKAGE_LIBCURL + select BR2_PACKAGE_LIBUV + select BR2_PACKAGE_ZEROMQ + help + Decentralized pool for Monero mining + + https://p2pool.io/ + +comment "monero needs a glibc or musl toolchain w/ C++, NPTL, dynamic library" + depends on BR2_ARCH_IS_64 + depends on !BR2_aarch64_be + depends on BR2_TOOLCHAIN_HAS_SYNC_4 + depends on BR2_USE_MMU + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ + BR2_TOOLCHAIN_USES_UCLIBC diff --git a/package/p2pool/p2pool.hash b/package/p2pool/p2pool.hash new file mode 100644 index 0000000000..b2d2ebd195 --- /dev/null +++ b/package/p2pool/p2pool.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 ba00735eb0b6bd357c041492d2c8b76e9b39d397123611c4f32412e65d8aafca p2pool-v2.4-br1.tar.gz +sha256 605e9047a563c5c8396ffb18232aa4304ec56586aee537c45064c6fb425e44ad LICENSE diff --git a/package/p2pool/p2pool.mk b/package/p2pool/p2pool.mk new file mode 100644 index 0000000000..75b3409b19 --- /dev/null +++ b/package/p2pool/p2pool.mk @@ -0,0 +1,27 @@ +################################################################################ +# +# p2pool +# +################################################################################ + +P2POOL_VERSION = v2.4 +P2POOL_SITE_METHOD = git +P2POOL_SITE = https://github.com/SChernykh/p2pool.git +P2POOL_GIT_SUBMODULES = YES +P2POOL_LICENSE = GPL-3.0+ +P2POOL_LICENSE_FILES = LICENSE +P2POOL_DEPENDENCIES = libcurl libuv zeromq + +# prevent compiler warnings being treated as errors +define P2POOL_REMOVE_WARNING_FLAGS + $(SED) '/set(WARNING_FLAGS/d' $(@D)/cmake/flags.cmake +endef +P2POOL_POST_PATCH_HOOKS += P2POOL_REMOVE_WARNING_FLAGS + +# Upstream provides no installation rule: +# *** No rule to make target 'install/fast'. Stop. +define P2POOL_INSTALL_TARGET_CMDS + $(INSTALL) -m 0755 -D $(@D)/p2pool $(TARGET_DIR)/usr/bin/p2pool +endef + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 19:52:04 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 20:52:04 +0100 Subject: [Buildroot] [PATCH v2 2/3] package/monero: new package In-Reply-To: <20221031195205.429257-1-bernd.kuhls@t-online.de> References: <20221031195205.429257-1-bernd.kuhls@t-online.de> Message-ID: <20221031195205.429257-2-bernd.kuhls@t-online.de> Signed-off-by: Bernd Kuhls --- v2: disabled support for BR2_aarch64_be, not supported upstream: https://github.com/tevador/RandomX/pull/257 DEVELOPERS | 1 + package/Config.in | 1 + .../monero/0001-disable-stack-protector.patch | 22 ++++ package/monero/0002-system-miniupnpc.patch | 112 ++++++++++++++++++ package/monero/Config.in | 35 ++++++ package/monero/monero.hash | 3 + package/monero/monero.mk | 55 +++++++++ 7 files changed, 229 insertions(+) create mode 100644 package/monero/0001-disable-stack-protector.patch create mode 100644 package/monero/0002-system-miniupnpc.patch create mode 100644 package/monero/Config.in create mode 100644 package/monero/monero.hash create mode 100644 package/monero/monero.mk diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..7db7954871 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -407,6 +407,7 @@ F: package/libyuv/ F: package/mesa3d/ F: package/minidlna/ F: package/mjpg-streamer/ +F: package/monero/ F: package/nut/ F: package/perl-crypt-openssl-guess/ F: package/perl-crypt-openssl-random/ diff --git a/package/Config.in b/package/Config.in index fff8186351..ac811bf2e4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -2179,6 +2179,7 @@ menu "Miscellaneous" source "package/haveged/Config.in" source "package/linux-syscall-support/Config.in" source "package/mobile-broadband-provider-info/Config.in" + source "package/monero/Config.in" source "package/netdata/Config.in" source "package/proj/Config.in" source "package/qemu/Config.in" diff --git a/package/monero/0001-disable-stack-protector.patch b/package/monero/0001-disable-stack-protector.patch new file mode 100644 index 0000000000..0407b4e32d --- /dev/null +++ b/package/monero/0001-disable-stack-protector.patch @@ -0,0 +1,22 @@ +Disable unconditional stack-protector support + +Signed-off-by: Bernd Kuhls + +diff -uNr monero-source-v0.18.1.0.orig/CMakeLists.txt monero-source-v0.18.1.0/CMakeLists.txt +--- monero-source-v0.18.1.0.orig/CMakeLists.txt 2022-08-10 05:34:23.000000000 +0200 ++++ monero-source-v0.18.1.0/CMakeLists.txt 2022-08-15 18:40:52.240699837 +0200 +@@ -831,14 +831,6 @@ + add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS) + add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS) + +- # -fstack-protector +- if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) +- add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS) +- add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS) +- add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS) +- endif() +- + # New in GCC 8.2 + if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))) + add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS) diff --git a/package/monero/0002-system-miniupnpc.patch b/package/monero/0002-system-miniupnpc.patch new file mode 100644 index 0000000000..e12d9302bd --- /dev/null +++ b/package/monero/0002-system-miniupnpc.patch @@ -0,0 +1,112 @@ +Add support for miniupnpc system library + +Downloaded from +https://git.alpinelinux.org/aports/plain/community/monero/system-miniupnpc.patch + +Signed-off-by: Bernd Kuhls + +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -676,6 +676,14 @@ + include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations") + add_subdirectory(external) + ++# Final setup for miniupnpc ++if(UPNP_STATIC OR IOS) ++ add_definitions("-DUPNP_STATIC") ++else() ++ add_definitions("-DUPNP_DYNAMIC") ++ include_directories(${UPNP_INCLUDE}) ++endif() ++ + # Final setup for libunbound + include_directories(${UNBOUND_INCLUDE_DIR}) + +diff --git a/src/p2p/net_node.inl b/src/p2p/net_node.inl +index 9b21705e..76340a22 100644 +--- a/src/p2p/net_node.inl ++++ b/src/p2p/net_node.inl +@@ -60,9 +60,16 @@ + #include "cryptonote_core/cryptonote_core.h" + #include "net/parse.h" + +-#include +-#include +-#include ++// We have to look for miniupnpc headers in different places, dependent on if its compiled or external ++#ifdef UPNP_STATIC ++ #include ++ #include ++ #include ++#else ++ #include "miniupnpc.h" ++ #include "upnpcommands.h" ++ #include "upnperrors.h" ++#endif + + #undef MONERO_DEFAULT_LOG_CATEGORY + #define MONERO_DEFAULT_LOG_CATEGORY "net.p2p" +-- +2.17.0 + +--- a/external/CMakeLists.txt 2021-12-04 03:56:51.405517304 +0200 ++++ b/external/CMakeLists.txt 2021-12-04 04:02:37.649484660 +0200 +@@ -34,24 +34,46 @@ + # We always compile if we are building statically to reduce static dependency issues... + # ...except for FreeBSD, because FreeBSD is a special case that doesn't play well with + # others. ++if(NOT IOS) ++ find_package(Miniupnpc QUIET) ++endif() + +-find_package(Miniupnpc REQUIRED) +- +-message(STATUS "Using in-tree miniupnpc") +-set(UPNPC_NO_INSTALL TRUE CACHE BOOL "Disable miniupnp installation" FORCE) +-add_subdirectory(miniupnp/miniupnpc) +-set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") +-set_property(TARGET libminiupnpc-static PROPERTY POSITION_INDEPENDENT_CODE ON) +-if(MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") +-elseif(NOT MSVC) +- set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++# If we have the correct shared version and we're not building static, use it ++if(STATIC OR IOS) ++ set(USE_SHARED_MINIUPNPC false) ++elseif(MINIUPNP_FOUND AND MINIUPNPC_VERSION_1_7_OR_HIGHER) ++ set(USE_SHARED_MINIUPNPC true) + endif() ++ ++ ++if(USE_SHARED_MINIUPNPC) ++ message(STATUS "Using shared miniupnpc found at ${MINIUPNP_INCLUDE_DIR}") ++ ++ set(UPNP_STATIC false PARENT_SCOPE) ++ set(UPNP_INCLUDE ${MINIUPNP_INCLUDE_DIR} PARENT_SCOPE) ++ set(UPNP_LIBRARIES ${MINIUPNP_LIBRARY} PARENT_SCOPE) ++else() ++ if(STATIC) ++ message(STATUS "Using miniupnpc from local source tree for static build") ++ else() ++ message(STATUS "Using miniupnpc from local source tree (/external/miniupnp/miniupnpc)") ++ endif() ++ add_subdirectory(miniupnp/miniupnpc) ++ ++ set_property(TARGET libminiupnpc-static PROPERTY FOLDER "external") ++ if(MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -wd4244 -wd4267") ++ elseif(NOT MSVC) ++ set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -Wno-undef -Wno-unused-result -Wno-unused-value") ++ endif() ++ + if(CMAKE_SYSTEM_NAME MATCHES "NetBSD") + set_property(TARGET libminiupnpc-static APPEND_STRING PROPERTY COMPILE_FLAGS " -D_NETBSD_SOURCE") + endif() + +-set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++ set(UPNP_STATIC true PARENT_SCOPE) ++ set(UPNP_LIBRARIES "libminiupnpc-static" PARENT_SCOPE) ++endif() + + find_package(Unbound) + diff --git a/package/monero/Config.in b/package/monero/Config.in new file mode 100644 index 0000000000..59036286cd --- /dev/null +++ b/package/monero/Config.in @@ -0,0 +1,35 @@ +config BR2_PACKAGE_MONERO + bool "monero" + depends on !BR2_aarch64_be && !BR2_i386 + depends on BR2_INSTALL_LIBSTDCPP + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-filesystem + # monero needs fenv.h which is not provided by uclibc + depends on !BR2_TOOLCHAIN_USES_UCLIBC + select BR2_PACKAGE_BOOST + select BR2_PACKAGE_BOOST_CHRONO + select BR2_PACKAGE_BOOST_DATE_TIME + select BR2_PACKAGE_BOOST_FILESYSTEM + select BR2_PACKAGE_BOOST_LOCALE + select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS + select BR2_PACKAGE_BOOST_REGEX + select BR2_PACKAGE_BOOST_SERIALIZATION + select BR2_PACKAGE_BOOST_SYSTEM + select BR2_PACKAGE_BOOST_THREAD + select BR2_PACKAGE_CZMQ + select BR2_PACKAGE_LIBMINIUPNPC + select BR2_PACKAGE_LIBSODIUM + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_UNBOUND + help + The secure, private, untraceable cryptocurrency + + https://getmonero.org/ + +comment "monero needs a glibc or musl toolchain w/ C++, dynamic library, threads" + depends on !BR2_aarch64_be && !BR2_i386 + depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS + depends on BR2_TOOLCHAIN_USES_UCLIBC || \ + !BR2_INSTALL_LIBSTDCPP || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_HAS_THREADS diff --git a/package/monero/monero.hash b/package/monero/monero.hash new file mode 100644 index 0000000000..91f452cbec --- /dev/null +++ b/package/monero/monero.hash @@ -0,0 +1,3 @@ +# Locally computed +sha256 0b667acba2223f8f082b388d7ceb5d212e0515b8a94395f3ec69183ef4bebf6c monero-source-v0.18.1.2.tar.bz2 +sha256 c2fe351163f4e0cee45d38e9481f2ea60f3cb77b24f818c4a2c740383f2f4cb2 LICENSE diff --git a/package/monero/monero.mk b/package/monero/monero.mk new file mode 100644 index 0000000000..ee215f90e1 --- /dev/null +++ b/package/monero/monero.mk @@ -0,0 +1,55 @@ +################################################################################ +# +# monero +# +################################################################################ + +MONERO_VERSION = 0.18.1.2 +MONERO_SOURCE = monero-source-v$(MONERO_VERSION).tar.bz2 +MONERO_SITE = https://downloads.getmonero.org/cli +MONERO_LICENSE = MIT +MONERO_LICENSE_FILES = LICENSE +MONERO_CONF_OPTS = \ + -DBUILD_DOCUMENTATION=OFF \ + -DCMAKE_CXX_FLAGS="$(MONERO_CXXFLAGS)" \ + -DCMAKE_BUILD_TYPE=None \ + -DMANUAL_SUBMODULES=ON \ + -DSTACK_TRACE=OFF \ + -DUSE_CCACHE=OFF \ + -DUSE_DEVICE_TREZOR=OFF +MONERO_DEPENDENCIES = \ + boost \ + czmq \ + libminiupnpc \ + libsodium \ + openssl \ + unbound + +ifeq ($(BR2_aarch64_be)$(BR2_mips)$(BR2_mipsel)$(BR2_mips64el)$(BR2_sparc64),y) +MONERO_CONF_OPTS += -DNO_AES=ON +endif + +MONERO_CXXFLAGS = $(TARGET_CXXFLAGS) -std=c++11 + +# Uses __atomic_load_8 +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +MONERO_CXXFLAGS += -latomic +endif + +# relocation truncated to fit: R_MIPS_GOT16 +ifeq ($(BR2_mipsel),y) +MONERO_CXXFLAGS += -mxgot +endif + +ifeq ($(BR2_PACKAGE_HIDAPI),y) +MONERO_DEPENDENCIES += hidapi +endif + +ifeq ($(BR2_PACKAGE_READLINE),y) +MONERO_CONF_OPTS += -DUSE_READLINE=ON +MONERO_DEPENDENCIES += readline +else +MONERO_CONF_OPTS += -DUSE_READLINE=OFF +endif + +$(eval $(cmake-package)) -- 2.34.1 From bernd.kuhls at t-online.de Mon Oct 31 20:35:01 2022 From: bernd.kuhls at t-online.de (Bernd Kuhls) Date: Mon, 31 Oct 2022 21:35:01 +0100 Subject: [Buildroot] [PATCH 1/1] package/libzlib: bump to version 1.2.13 References: <20221023165026.13707-1-fontaine.fabrice__23420.659061388$1666543861$gmane$org@gmail.com> Message-ID: Am Sun, 23 Oct 2022 18:50:26 +0200 schrieb Fabrice Fontaine: > - Drop all patches (already in version) > - Replace README by LICENSE file added with > https://github.com/madler/zlib/commit/ 352cb28d12baf02863ff5d4d96be0587ced419a1 > > https://github.com/madler/zlib/releases/tag/v1.2.13 Hi, ftr: this fixes CVE-2022-37434: https://nvd.nist.gov/vuln/detail/CVE-2022-37434 Regards, Bernd From thomas.petazzoni at bootlin.com Mon Oct 31 20:39:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:39:26 +0100 Subject: [Buildroot] NodeJS, qemu wrapper and ELF interpreter fun Message-ID: <20221031213926.50d3c778@windsurf> Hello, I finally took some time to investigate the NodeJS build issue that occurs on x86-64: http://autobuild.buildroot.net/results/4f2/4f29c5e663b5d01af20d671baf6504332b8c1f7b/build-end.log The failure goes like this: cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj.host/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by ../../out/Release/bytecode_builtins_list_generator) ../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../../out/Release/bytecode_builtins_list_generator) Return code is 1 This problem also has a bug report at https://bugs.busybox.net/show_bug.cgi?id=14366. As you probably know, v8-qemu-wrapper is a script that uses Qemu user-mode emulation to run some programs built for the target. We are then supposed to use the libraries built for the target, but here for some reason, the C library of the host gets used, and it fails badly because it is older than the C library that is available for the target. So the question is: why the heck does Qemu use the host C library? To answer this question, we first have to look at how the -L option of Qemu is implemented. This option is documented as such: -L path QEMU_LD_PREFIX set the elf interpreter prefix to 'path' And the v8-qemu-wrapper script makes this option point to $(STAGING_DIR), so that the ELF interpreter used is the one in $(STAGING_DIR). However, contrary to what the option documentation says, this option does much more than setting the ELF interpreter prefix: it is going to affect how *all* system calls manipulating files (open, etc.) are going to work. When this option is passed, the function init_paths() in https://git.qemu.org/?p=qemu.git;a=blob;f=util/path.c is called at initialization time, and essentially its sets the global "base" variable to point to the directory passed as -L argument. Then, for every single syscall that manipulates a path, this path will be passed through the path() function in the same file. This function will first attempt to resolve the path with "base" as a prefix, and if not, return the unprefixed path. After adding some traces into this function, I was able to understand what happens: (1) -L$(STAGING_DIR) is passed, causing "base" to point to $(STAGING_DIR) (2) The target ELF interpreter from $(STAGING_DIR) is properly invoked (3) When this ELF interpreter then resolves the libc.so.6 library, it first looks for /etc/ld.so.cache. (4) Qemu first looks for /etc/ld.so.cache with the -L prefix, i.e $(STAGING_DIR)/etc/ld.so.cache, but it does not exist. So, the Qemu system call emulation falls back to /etc/ld.so.cache, which means the target ELF interpreter reads the /etc/ld.so.cache of the host system. (5) This /etc/ld.so.cache of the host system says that libc.so.6 is in /lib/x86_64-linux-gnu/ (6) The target ELF interpreter therefore tries to use /lib/x86_64-linux-gnu/libc.so.6. The Qemu system call emulation first tries $(STAGING_DIR)/lib/x86_64-linux-gnu/libc.so.6, but this library does not exist (it is in $(STAGING_DIR)/lib/libc.so.6), so the Qemu system call emulation falls back to /lib/x86_64-linux-gnu/libc.so.6 of the host system, which exist... but is too old compared to the target C library. Indeed, results from ld.so.cache take precedence over the simple resolution of library paths in /usr/lib and /lib. We see 3 possible ideas to resolve this problem: (A) Change the behavior of Qemu to not fallback to unprefixed paths: when -L is passed, all path-related system calls should see the paths prefixed by the -L option. Issue with this is that this change is unlikely to get accepted by Qemu upstream. And there might be some side effects we have not really identified. (B) Create an empty $(STAGING_DIR)/etc/ld.so.cache. We have tested this solution and it works: it gets used instead of the host /etc/ld.so.cache. Because $(STAGING_DIR)/etc/ld.so.cache is empty, there's no libc.so.6 match, so the target ELF interpreter goes through its normal library location resolution logic, which falls back to trying in /usr/lib and /lib, which works as those paths ends up being prefixed with $(STAGING_DIR) by Qemu. (C) Pass LD_LIBRARY_PATH pointing to $(STAGING_DIR)/lib and $(STAGING_DIR)/usr/lib in the Qemu wrapper. This works because LD_LIBRARY_PATH paths have precedence over paths given by ld.so.cache. This is the solution already used by the GOI qemu wrapper in package/gobject-introspection/g-ir-scanner-qemuwrapper.in, and which was suggested in bug https://bugs.busybox.net/show_bug.cgi?id=14366. Any opinion? Or other ideas? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 20:47:39 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:47:39 +0100 Subject: [Buildroot] [PATCH 1/3] package/ssdp-responder: bump to version 1.9 In-Reply-To: <20221031174632.377586-2-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> <20221031174632.377586-2-troglobit@gmail.com> Message-ID: <20221031214739.6b258cb3@windsurf> On Mon, 31 Oct 2022 18:46:30 +0100 Joachim Wiberg wrote: > Changes: > - New command line options to ssdp-scan > - Update copyright years (affects LICENSE file hash) > > Fixes: > - Workaround for OpenVPN /32 default server setup > - Time-of-check vs time-of-use issue with caching of UUID, > found by Coverity Scan, fixed by Raul Porancea > > Signed-off-by: Joachim Wiberg Thanks for the patch! One request below. > --- > package/ssdp-responder/ssdp-responder.hash | 4 ++-- > package/ssdp-responder/ssdp-responder.mk | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/package/ssdp-responder/ssdp-responder.hash b/package/ssdp-responder/ssdp-responder.hash > index e8cbbb4a1f..425ad86e08 100644 > --- a/package/ssdp-responder/ssdp-responder.hash > +++ b/package/ssdp-responder/ssdp-responder.hash > @@ -1,3 +1,3 @@ > # Locally calculated > -sha256 7ae49229e7c7a55fed9e36598b12e2173eecef0fffe0a386b6a10fad30f3c79f ssdp-responder-1.8.tar.gz > -sha256 e17dc0bc91bf499d8cca5e016c22c6d2a4770e3cc1a43756a7973375a83ddb90 LICENSE > +sha256 974c244abd4ba8c87532867a84756182a1460c99072ffb1eb91c5a1f73311d89 ssdp-responder-1.9.tar.gz > +sha256 68d6fdc22e337f725fe719bf9ae6d92b1d8d0ca4cff8219b303ab76706670a8d LICENSE The hash of the license file is changed, this should be explained in the commit log (what are the changes, do they require changing the license information in the .mk file). Silently changing the license file hashes defeats the entire purpose of having hashes for license files, which is precisely to carefully verify what has changed in the license file. Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 20:49:56 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 21:49:56 +0100 Subject: [Buildroot] [PATCH 3/3] package/ssdp-responder: fix warnings from check-package and shellcheck In-Reply-To: <20221031174632.377586-4-troglobit@gmail.com> References: <20221031174632.377586-1-troglobit@gmail.com> <20221031174632.377586-4-troglobit@gmail.com> Message-ID: <20221031214956.37e0ef12@windsurf> On Mon, 31 Oct 2022 18:46:32 +0100 Joachim Wiberg wrote: > +cmd() > +{ > + start-stop-daemon -q -p "$PIDFILE" -x "$DAEMON" "$@" > + status=$? > + [ $status -eq 0 ] && echo "OK" || echo "FAIL" > + > + return $status > +} I don't think we're using this cmd construct anywhere else in the tree, or did I miss some change in our coding style/policy? > > start() { > - printf 'Starting %s: ' "$NAME" > - start-stop-daemon -S -q -p $PIDFILE -x $DAEMON -- $DAEMON_ARGS > - [ $? = 0 ] && echo "OK" || echo "FAIL" This all looked matching our coding style. Why are you changing this? > case "$1" in > - start|stop|restart) > - "$1" > - ;; > - reload) > - restart > - ;; > - *) > - echo "Usage: $0 {start|stop|restart|reload}" > - exit 1 > + start|stop|restart) > + "$1" > + ;; > + reload) > + restart > + ;; > + *) > + echo "Usage: $0 {start|stop|restart|reload}" > + exit 1 I'm not sure what is the recommended indentation style in our init scripts. Tabs? Spaces? Thanks! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:02:26 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:02:26 +0100 Subject: [Buildroot] [PATCH v2 1/5] arch/Config.in.xtensa: adjust endianness logic to avoid bogus configurations In-Reply-To: <20220925101041.GH1127102@scaer> References: <20220925090920.1585682-1-thomas.petazzoni@bootlin.com> <20220925090920.1585682-2-thomas.petazzoni@bootlin.com> <20220925101041.GH1127102@scaer> Message-ID: <20221031220226.36f3ccf8@windsurf> Hello, Sorry to bring back this topic only now, but there are still Xtensa issues that we need to resolve, and this series was aiming at solving them. But I have further questions. On Sun, 25 Sep 2022 12:10:41 +0200 "Yann E. MORIN" wrote: > > diff --git a/arch/Config.in.xtensa b/arch/Config.in.xtensa > > index f9d5adb4c9..4bb58e1964 100644 > > --- a/arch/Config.in.xtensa > > +++ b/arch/Config.in.xtensa > > @@ -37,6 +37,10 @@ config BR2_XTENSA_LITTLE_ENDIAN > > > > config BR2_XTENSA_BIG_ENDIAN > > bool "Big endian" > > + # Internal toolchains without an overlay file are always > > + # little-endian, so we prevent from selecting big endian in > > + # this case. > > + depends on BR2_XTENSA_OVERLAY_FILE != "" || BR2_TOOLCHAIN_EXTERNAL > > I think that dependency should go to the whole choice instead: > > choice > prompt "Target Architecture Endianness" > default BR2_XTENSA_LITTLE_ENDIAN > depends on BR2_XTENSA_CUSTOM || BR2_TOOLCHAIN_EXTERNAL My memory is probably vague, but I don't see how this solve the problem. The problem was to prevent the user from choosing "big endian" if he has selected a custom core but not specified an overlay. > This should cover the external toolchain case, and the internal > toolchain for a custom core (assuming we keep the no-empty overlay for > custom cores). Not sure what you mean by "assuming we keep the no-empty overlay for custom cores". > > I.e. semantically, choosing between big or little is not about having or > not having an overlay, but about being a custom core or not (or using a > custom toolchain). Not sure to follow you here. The only issue is precisely that if you don't specify an overlay, there is no way your custom Xtensa core can be big endian: it will be little endian. The configuration we want to prevent the user from creating is: custom core, no overlay, big endian. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:05:11 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:05:11 +0100 Subject: [Buildroot] [PATCH v2 2/5] Revert "arch/xtensa: custom configuration requires an overlay" In-Reply-To: <20220925121302.6e9aa48d@windsurf> References: <20220925090920.1585682-1-thomas.petazzoni@bootlin.com> <20220925090920.1585682-3-thomas.petazzoni@bootlin.com> <20220925100355.GG1127102@scaer> <20220925121302.6e9aa48d@windsurf> Message-ID: <20221031220511.76f39b7f@windsurf> On Sun, 25 Sep 2022 12:13:02 +0200 Thomas Petazzoni wrote: > > As 4cbf7336914f explained, an empty overlay is equivalent to using the > > fsf variant, so in that case, there would be no point in asking for a > > custom core to begin with, and Max Filipov seemed to agree: > > https://lore.kernel.org/buildroot/CAMo8BfKHKuVC86uOwP0z8CzE425q7u0B_q6jdeU0Rw9upaiY=Q at mail.gmail.com/ > > > > So, I think we are maybe taking the issue from the wrong side here. We > > should forbid an empty overlay only when using our internal toolchain > > for a custom xtensa core. I.e.: > > > > diff --git a/arch/arch.mk.xtensa b/arch/arch.mk.xtensa > > index 7b6c59cecd..1799528a93 100644 > > --- a/arch/arch.mk.xtensa > > +++ b/arch/arch.mk.xtensa > > @@ -1,8 +1,10 @@ > > BR_ARCH_XTENSA_OVERLAY_FILE = $(call qstrip,$(BR2_XTENSA_OVERLAY_FILE)) > > > > -ifeq ($(BR_BUILDING)$(BR2_XTENSA_CUSTOM):$(BR_ARCH_XTENSA_OVERLAY_FILE),yy:) > > +ifeq ($(BR_BUILDING)$(BR2_TOOLCHAIN_BUILDROOT),yy) > > +ifeq ($(BR_ARCH_XTENSA_OVERLAY_FILE),) > > $(error No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting) > > endif > > +endif > > You're right, this seems to be a better approach. In the case of an > internal toolchain with custom core, it means the user still sees the > little/big endian choice, but if he hasn't specified an overlay, the > build will be aborted early on. Now that I re-read this, I'm no longer sure to understand. If you have a configuration BR2_TOOLCHAIN_BUILDROOT=y, BR2_xtensa_fsf=y, then BR2_XTENSA_OVERLAY_FILE will be empty, but it's perfectly normal. But with your proposed change, such a configuration would no longer build, as we would now always require an overlay to be specified. Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From thomas.petazzoni at bootlin.com Mon Oct 31 21:07:13 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 22:07:13 +0100 Subject: [Buildroot] [PATCH 1/1] support/config-fragments/autobuild: fix bootlin-xtensa-uclibc.config In-Reply-To: <20221010030937.6432-1-ju.o@free.fr> References: <20221010030937.6432-1-ju.o@free.fr> Message-ID: <20221031220713.5c81cc21@windsurf> Hello Julien, On Sun, 9 Oct 2022 23:09:37 -0400 Julien Olivain wrote: > Commit 4cbf7336914f25478aea943456ba7dc3c892c21a > "arch/xtensa: custom configuration requires an overlay" > added an error message if BR2_XTENSA_CUSTOM is set and > BR_ARCH_XTENSA_OVERLAY_FILE is unset. > > When testing a package with the command: > > ./utils/test-pkg --all --package somepackage > > bootlin-xtensa-uclibc toolchain is always failing with error in the logfile: > > arch/arch.mk.xtensa:4: *** No xtensa overlay file provided. Check your BR2_XTENSA_OVERLAY_FILE setting. Stop. > > This commit fixes the toolchain config fragment by adding the same overlay > file found in qemu_xtensa_lx60_defconfig. > > Signed-off-by: Julien Olivain > --- > support/config-fragments/autobuild/bootlin-xtensa-uclibc.config | 1 + > 1 file changed, 1 insertion(+) Thanks, but adding an overlay here is not the right solution. The problem is that 4cbf7336914f25478aea943456ba7dc3c892c21a is incorrect. I already sent a series to fix that on Sep 25, 2022: https://lore.kernel.org/buildroot/20220925090920.1585682-1-thomas.petazzoni at bootlin.com/ but it did receive some comments, and therefore was not applied. But the solution is more along the lines of changing how Xtensa is handled rather than working around the problem in bootlin-xtensa-uclibc.config. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com From fontaine.fabrice at gmail.com Mon Oct 31 21:40:34 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 22:40:34 +0100 Subject: [Buildroot] [PATCH 1/1] package/xerces: bump to version 3.2.4 Message-ID: <20221031214034.20298-1-fontaine.fabrice@gmail.com> Drop second patch (already in version) https://github.com/apache/xerces-c/compare/v3.2.3...v3.2.4 Signed-off-by: Fabrice Fontaine --- ...oadMsg-fix-memory-leak-when-transcod.patch | 87 ------------------- package/xerces/xerces.hash | 4 +- package/xerces/xerces.mk | 2 +- 3 files changed, 3 insertions(+), 90 deletions(-) delete mode 100644 package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch diff --git a/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch b/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch deleted file mode 100644 index 76b37c63d9..0000000000 --- a/package/xerces/0002-InMemMsgLoader-loadMsg-fix-memory-leak-when-transcod.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 1bdf6d8ba878c1fe1d779824be70001fc0bebd2c Mon Sep 17 00:00:00 2001 -From: Even Rouault -Date: Fri, 27 Aug 2021 01:33:27 +0200 -Subject: [PATCH] InMemMsgLoader::loadMsg(): fix memory leak when transcoding - fails. - -Seen with the IconvGNU transcoder when parsing " - ---- - .../MsgLoaders/InMemory/InMemMsgLoader.cpp | 31 ++++++++++++++----- - 1 file changed, 23 insertions(+), 8 deletions(-) - -diff --git a/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp b/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -index cda103226..6971fde96 100644 ---- a/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -+++ b/src/xercesc/util/MsgLoaders/InMemory/InMemMsgLoader.cpp -@@ -25,6 +25,7 @@ - // --------------------------------------------------------------------------- - #include - #include -+#include - #include - #include - #include -@@ -153,14 +154,28 @@ bool InMemMsgLoader::loadMsg(const XMLMsgLoader::XMLMsgId msgToLoad - XMLCh* tmp4 = 0; - - bool bRet = false; -- if (repText1) -- tmp1 = XMLString::transcode(repText1, manager); -- if (repText2) -- tmp2 = XMLString::transcode(repText2, manager); -- if (repText3) -- tmp3 = XMLString::transcode(repText3, manager); -- if (repText4) -- tmp4 = XMLString::transcode(repText4, manager); -+ try -+ { -+ if (repText1) -+ tmp1 = XMLString::transcode(repText1, manager); -+ if (repText2) -+ tmp2 = XMLString::transcode(repText2, manager); -+ if (repText3) -+ tmp3 = XMLString::transcode(repText3, manager); -+ if (repText4) -+ tmp4 = XMLString::transcode(repText4, manager); -+ } -+ catch( const TranscodingException& ) -+ { -+ if (tmp1) -+ manager->deallocate(tmp1); -+ if (tmp2) -+ manager->deallocate(tmp2); -+ if (tmp3) -+ manager->deallocate(tmp3); -+ // Note: tmp4 cannot leak -+ throw; -+ } - - bRet = loadMsg(msgToLoad, toFill, maxChars, tmp1, tmp2, tmp3, tmp4, manager); - --- -2.17.1 - diff --git a/package/xerces/xerces.hash b/package/xerces/xerces.hash index c75ce860e8..e6b5b922d2 100644 --- a/package/xerces/xerces.hash +++ b/package/xerces/xerces.hash @@ -1,5 +1,5 @@ -# From http://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.2.3.tar.xz.sha256 -sha256 12fc99a9fc1d1a79bd0e927b8b5637a576d6656f45b0d5e70ee3694d379cc149 xerces-c-3.2.3.tar.xz +# From http://www.apache.org/dist/xerces/c/3/sources/xerces-c-3.2.4.tar.xz.sha256 +sha256 075bc57940da0f9be6dd183c550c8ce0b9833e4550dc382048377a1a5e3b2bd9 xerces-c-3.2.4.tar.xz # Hash for license file sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30 LICENSE diff --git a/package/xerces/xerces.mk b/package/xerces/xerces.mk index a3e5361b2e..08efa6fb5c 100644 --- a/package/xerces/xerces.mk +++ b/package/xerces/xerces.mk @@ -4,7 +4,7 @@ # ################################################################################ -XERCES_VERSION = 3.2.3 +XERCES_VERSION = 3.2.4 XERCES_SOURCE = xerces-c-$(XERCES_VERSION).tar.xz XERCES_SITE = http://archive.apache.org/dist/xerces/c/3/sources XERCES_LICENSE = Apache-2.0 -- 2.35.1 From fontaine.fabrice at gmail.com Mon Oct 31 21:57:48 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 22:57:48 +0100 Subject: [Buildroot] [PATCH 1/1] package/flann: bump to version 1.9.2 Message-ID: <20221031215748.41579-1-fontaine.fabrice@gmail.com> - lz4 is a mandatory dependency since https://github.com/flann-lib/flann/commit/df3fc59212660e43867cb85d5e557f5cae6d30d7 - Drop patch (not needed since https://github.com/flann-lib/flann/commit/86c92adbdea3e41d7ad371732cfe3b8231e0ecc6) - PYTHON_EXECUTABLE can be dropped since https://github.com/flann-lib/flann/commit/5f4ac506323585c1f74ef57a73962beb887e3a3b https://github.com/flann-lib/flann/blob/1.9.2/ChangeLog Signed-off-by: Fabrice Fontaine --- .../0001-src-cpp-fix-cmake-3.11-build.patch | 80 ------------------- package/flann/Config.in | 1 + package/flann/flann.hash | 2 +- package/flann/flann.mk | 4 +- 4 files changed, 4 insertions(+), 83 deletions(-) delete mode 100644 package/flann/0001-src-cpp-fix-cmake-3.11-build.patch diff --git a/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch b/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch deleted file mode 100644 index b37bedcf6d..0000000000 --- a/package/flann/0001-src-cpp-fix-cmake-3.11-build.patch +++ /dev/null @@ -1,80 +0,0 @@ -From fa5ec96a94646492a3f908e12905b3e48a8e800b Mon Sep 17 00:00:00 2001 -From: Romain Naour -Date: Wed, 18 Apr 2018 20:24:13 +0200 -Subject: [PATCH] src/cpp: fix cmake >= 3.11 build - -CMake < 3.11 doesn't support add_library() without any source file -(i.e add_library(foo SHARED)). But flann CMake use a trick that use -an empty string "" as source list (i.e add_library(foo SHARED "")). -This look like a bug in CMake < 3.11. - -With CMake >= 3.11, the new behaviour of add_library() break the -existing flann CMake code. - -From CMake Changelog [1]: -"add_library() and add_executable() commands can now be called without - any sources and will not complain as long as sources are added later - via the target_sources() command." - -Note: flann CMake code doesn't use target_sources() since no source file -are provided intentionally since the flann shared library is created by -linking with the flann_cpp_s static library with this line: - -target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive) - -If you try to use "add_library(flann_cpp SHARED ${CPP_SOURCES})" (as it should -be normally done), the link fail due to already defined symbol. - -They are building the shared version using the static library "to speedup the -build time" [3] - -This issue is already reported upstream [2] with a proposed solution. - -Upstream status: Pending - -Fixes: -http://autobuild.buildroot.net/results/b2f/b2febfaf8c44ce477b3e4a5b9b976fd25e8d7454 - -[1] https://cmake.org/cmake/help/v3.11/release/3.11.html -[2] https://github.com/mariusmuja/flann/issues/369 -[3] https://github.com/mariusmuja/flann/commit/0fd62b43be2fbb0b8d791ee36290791224dc030c - -Signed-off-by: Romain Naour ---- - src/cpp/CMakeLists.txt | 4 ++-- - src/cpp/empty.cpp | 1 + - 2 files changed, 3 insertions(+), 2 deletions(-) - create mode 100644 src/cpp/empty.cpp - -diff --git a/src/cpp/CMakeLists.txt b/src/cpp/CMakeLists.txt -index b44a735..a816863 100644 ---- a/src/cpp/CMakeLists.txt -+++ b/src/cpp/CMakeLists.txt -@@ -29,7 +29,7 @@ if (BUILD_CUDA_LIB) - endif() - - if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND CMAKE_COMPILER_IS_GNUCC) -- add_library(flann_cpp SHARED "") -+ add_library(flann_cpp SHARED "empty.cpp") - set_target_properties(flann_cpp PROPERTIES LINKER_LANGUAGE CXX) - target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive) - -@@ -85,7 +85,7 @@ if (BUILD_C_BINDINGS) - set_property(TARGET flann_s PROPERTY COMPILE_DEFINITIONS FLANN_STATIC) - - if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND CMAKE_COMPILER_IS_GNUCC) -- add_library(flann SHARED "") -+ add_library(flann SHARED "empty.cpp") - set_target_properties(flann PROPERTIES LINKER_LANGUAGE CXX) - target_link_libraries(flann -Wl,-whole-archive flann_s -Wl,-no-whole-archive) - else() -diff --git a/src/cpp/empty.cpp b/src/cpp/empty.cpp -new file mode 100644 -index 0000000..40a8c17 ---- /dev/null -+++ b/src/cpp/empty.cpp -@@ -0,0 +1 @@ -+/* empty */ --- -2.14.3 - diff --git a/package/flann/Config.in b/package/flann/Config.in index 3725fc784f..180d7eae8a 100644 --- a/package/flann/Config.in +++ b/package/flann/Config.in @@ -2,6 +2,7 @@ config BR2_PACKAGE_FLANN bool "flann" depends on BR2_INSTALL_LIBSTDCPP depends on !BR2_STATIC_LIBS + select BR2_PACKAGE_LZ4 help FLANN is a library for performing fast approximate nearest neighbor searches in high dimensional spaces. It contains a diff --git a/package/flann/flann.hash b/package/flann/flann.hash index 543e4b483d..6eaa48c403 100644 --- a/package/flann/flann.hash +++ b/package/flann/flann.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 b23b5f4e71139faa3bcb39e6bbcc76967fbaf308c4ee9d4f5bfbeceaa76cc5d3 flann-1.9.1.tar.gz +sha256 e26829bb0017f317d9cc45ab83ddcb8b16d75ada1ae07157006c1e7d601c8824 flann-1.9.2.tar.gz sha256 3993f339cc56506c62aa1eb2fb76f240ee93b738d857832899c1e207b1dc069a COPYING diff --git a/package/flann/flann.mk b/package/flann/flann.mk index 6c2e6a9e78..d1a622e685 100644 --- a/package/flann/flann.mk +++ b/package/flann/flann.mk @@ -4,18 +4,18 @@ # ################################################################################ -FLANN_VERSION = 1.9.1 +FLANN_VERSION = 1.9.2 FLANN_SITE = $(call github,mariusmuja,flann,$(FLANN_VERSION)) FLANN_INSTALL_STAGING = YES FLANN_LICENSE = BSD-3-Clause FLANN_LICENSE_FILES = COPYING +FLANN_DEPENDENCIES = host-pkgconf lz4 FLANN_CONF_OPTS = \ -DBUILD_C_BINDINGS=ON \ -DBUILD_PYTHON_BINDINGS=OFF \ -DBUILD_MATLAB_BINDINGS=OFF \ -DBUILD_EXAMPLES=$(if $(BR2_PACKAGE_FLANN_EXAMPLES),ON,OFF) \ -DUSE_OPENMP=$(if $(BR2_TOOLCHAIN_HAS_OPENMP),ON,OFF) \ - -DPYTHON_EXECUTABLE=OFF \ -DCMAKE_DISABLE_FIND_PACKAGE_HDF5=TRUE FLANN_CXXFLAGS = $(TARGET_CXXFLAGS) -- 2.35.1 From fontaine.fabrice at gmail.com Mon Oct 31 22:00:20 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 23:00:20 +0100 Subject: [Buildroot] [PATCH 1/1] package/uftrace: bump to version 0.12 Message-ID: <20221031220020.44199-1-fontaine.fabrice@gmail.com> Drop second patch (already in version) https://github.com/namhyung/uftrace/blob/v0.12/NEWS Signed-off-by: Fabrice Fontaine --- ...support.c-define-EF_ARM_VFP_FLOAT-wh.patch | 31 ------------------- package/uftrace/uftrace.hash | 2 +- package/uftrace/uftrace.mk | 2 +- 3 files changed, 2 insertions(+), 33 deletions(-) delete mode 100644 package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch diff --git a/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch b/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch deleted file mode 100644 index 03fba88693..0000000000 --- a/package/uftrace/0002-arch-arm-mcount-support.c-define-EF_ARM_VFP_FLOAT-wh.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 4e543097e62eb052650433d1d4c9c5996d30f242 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 23 Apr 2021 23:06:01 +0200 -Subject: [PATCH] arch/arm/mcount-support.c: define EF_ARM_VFP_FLOAT when not - available - -uClibc-ng doesn't define EF_ARM_VFP_FLOAT, so let's define it. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/mcount-support.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/arch/arm/mcount-support.c b/arch/arm/mcount-support.c -index 8d23460b..51331740 100644 ---- a/arch/arm/mcount-support.c -+++ b/arch/arm/mcount-support.c -@@ -3,6 +3,10 @@ - #include - #include - -+#ifndef EF_ARM_VFP_FLOAT -+# define EF_ARM_VFP_FLOAT 0x400 -+#endif -+ - #ifndef EF_ARM_ABI_FLOAT_HARD - # define EF_ARM_ABI_FLOAT_HARD EF_ARM_VFP_FLOAT - #endif --- -2.30.2 - diff --git a/package/uftrace/uftrace.hash b/package/uftrace/uftrace.hash index b2a3ddc5a9..195f0605c8 100644 --- a/package/uftrace/uftrace.hash +++ b/package/uftrace/uftrace.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 b8b56d540ea95c3eafe56440d6a998e0a140d53ca2584916b6ca82702795bbd9 uftrace-0.10.tar.gz +sha256 2aad01f27d4f18717b681824c7a28ac3e1efd5e7bbed3ec888a3ea5af60e3700 uftrace-0.12.tar.gz sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING diff --git a/package/uftrace/uftrace.mk b/package/uftrace/uftrace.mk index b487b30695..d36c3bd8f5 100644 --- a/package/uftrace/uftrace.mk +++ b/package/uftrace/uftrace.mk @@ -4,7 +4,7 @@ # ################################################################################ -UFTRACE_VERSION = 0.10 +UFTRACE_VERSION = 0.12 UFTRACE_SITE = $(call github,namhyung,uftrace,v$(UFTRACE_VERSION)) UFTRACE_LICENSE = GPL-2.0 UFTRACE_LICENSE_FILES = COPYING -- 2.35.1 From thomas.petazzoni at bootlin.com Mon Oct 31 22:02:27 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 23:02:27 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: <20220904191010.200822-1-christian@paral.in> References: <20220904191010.200822-1-christian@paral.in> Message-ID: <20221031230227.222d7ad1@windsurf> Hello Christian, On Sun, 4 Sep 2022 12:10:10 -0700 Christian Stewart via buildroot wrote: > -$(eval $(python-package)) > +DOCKER_COMPOSE_BUILD_TARGETS = cmd > +DOCKER_COMPOSE_GOMOD = github.com/docker/compose/v2 > +DOCKER_COMPOSE_LDFLAGS = \ > + -X github.com/docker/compose/v2/internal.Version=$(DOCKER_COMPOSE_VERSION) > + > +define DOCKER_COMPOSE_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 755 $(@D)/bin/cmd \ > + $(TARGET_DIR)/usr/lib/docker/cli-plugins/docker-compose > +endef > + > +$(eval $(golang-package)) It looks like this commit has broken our docker compose test case (support/testing/tests/package/test_docker_compose.py). Indeed, this test expects to be able to run a command called "docker-compose", which no longer exists, so the test fails with: # docker-compose up -d -sh: docker-compose: not found # echo $? 127 See: https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442 https://buildroot.org.gitlab.io/-/buildroot/-/jobs/3249828442/artifacts/test-output/TestDockerCompose-build.log https://buildroot.org.gitlab.io/-/buildroot/-/jobs/3249828442/artifacts/test-output/TestDockerCompose-run.log Could have a look and provide a patch to fix this test case? Also, could you send a patch adding yourself in the DEVELOPERS file for this test case, since you're often looking after Docker related topics in Buildroot? Thanks a lot! Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From christian at paral.in Mon Oct 31 22:08:04 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:08:04 -0700 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: <20221031230227.222d7ad1@windsurf> References: <20220904191010.200822-1-christian@paral.in> <20221031230227.222d7ad1@windsurf> Message-ID: Hi Thomas, On Mon, Oct 31, 2022 at 3:02 PM Thomas Petazzoni wrote: > It looks like this commit has broken our docker compose test case > (support/testing/tests/package/test_docker_compose.py). Indeed, this > test expects to be able to run a command called "docker-compose", which > no longer exists, so the test fails with: > > # docker-compose up -d > -sh: docker-compose: not found > # echo $? > 127 The change is to run "docker compose" instead of "docker-compose" diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120 > Also, could you send a patch adding yourself in the DEVELOPERS file for > this test case, since you're often looking after Docker related topics > in Buildroot? I can send a patch for that too, are you able to check real quick if that change above fixes the issue? Thanks, Christian Stewart From fontaine.fabrice at gmail.com Mon Oct 31 22:11:31 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Mon, 31 Oct 2022 23:11:31 +0100 Subject: [Buildroot] [PATCH 1/1] package/rpm: bump to version 4.18.0 Message-ID: <20221031221131.257422-1-fontaine.fabrice@gmail.com> https://rpm.org/wiki/Releases/4.18.0 Signed-off-by: Fabrice Fontaine --- package/rpm/rpm.hash | 4 ++-- package/rpm/rpm.mk | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/package/rpm/rpm.hash b/package/rpm/rpm.hash index 19b6dd9176..dfe50303f7 100644 --- a/package/rpm/rpm.hash +++ b/package/rpm/rpm.hash @@ -1,5 +1,5 @@ -# From https://rpm.org/wiki/Releases/4.17.0.html -sha256 2e0d220b24749b17810ed181ac1ed005a56bbb6bc8ac429c21f314068dc65e6a rpm-4.17.0.tar.bz2 +# From https://rpm.org/wiki/Releases/4.18.0.html +sha256 2a17152d7187ab30edf2c2fb586463bdf6388de7b5837480955659e5e9054554 rpm-4.18.0.tar.bz2 # Hash for license file sha256 171d94d9f1641316bff7f157a903237dc69cdb5fca405fed8c832c76ed8370f9 COPYING diff --git a/package/rpm/rpm.mk b/package/rpm/rpm.mk index 5c04d47f10..fc57a14fd6 100644 --- a/package/rpm/rpm.mk +++ b/package/rpm/rpm.mk @@ -4,7 +4,7 @@ # ################################################################################ -RPM_VERSION_MAJOR = 4.17 +RPM_VERSION_MAJOR = 4.18 RPM_VERSION = $(RPM_VERSION_MAJOR).0 RPM_SOURCE = rpm-$(RPM_VERSION).tar.bz2 RPM_SITE = http://ftp.rpm.org/releases/rpm-$(RPM_VERSION_MAJOR).x -- 2.35.1 From christian at paral.in Mon Oct 31 22:29:07 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:29:07 -0700 Subject: [Buildroot] [PATCH 1/1] DEVELOPERS: add myself for package/docker-compose Message-ID: <20221031222907.275293-1-christian@paral.in> Signed-off-by: Christian Stewart --- DEVELOPERS | 1 + 1 file changed, 1 insertion(+) diff --git a/DEVELOPERS b/DEVELOPERS index 06ee5d8056..e1e919ce4f 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -554,6 +554,7 @@ F: package/pkg-golang.mk F: package/rtl8821au/ F: package/runc/ F: package/tini/ +F: support/testing/tests/package/test_docker_compose.py N: Christophe Priouzeau F: board/stmicroelectronics/stm32f429-disco/ -- 2.38.1 From christian at paral.in Mon Oct 31 22:31:33 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 15:31:33 -0700 Subject: [Buildroot] [PATCH 1/1] support/testing/tests/package/test_docker-compose: fix docker compose binary name Message-ID: <20221031223133.278452-1-christian@paral.in> Docker compose is now invoked as "docker compose" not "docker-compose." Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) -- 2.38.1 From thomas.petazzoni at bootlin.com Mon Oct 31 22:31:34 2022 From: thomas.petazzoni at bootlin.com (Thomas Petazzoni) Date: Mon, 31 Oct 2022 23:31:34 +0100 Subject: [Buildroot] [PATCH v1 1/1] package/docker-compose: bump to version 2.10.0 In-Reply-To: References: <20220904191010.200822-1-christian@paral.in> <20221031230227.222d7ad1@windsurf> Message-ID: <20221031233134.6d432abd@windsurf> On Mon, 31 Oct 2022 15:08:04 -0700 Christian Stewart wrote: > I can send a patch for that too, are you able to check real quick if > that change above fixes the issue? It does fix the docker compose issue, but then the loop of docker inspect that waits for the container to be ready never completes: # while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 Error: No such object: root_busybox_1 [.... until it gets killed by the timeout ....] Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com From fontaine.fabrice at gmail.com Mon Oct 31 23:13:33 2022 From: fontaine.fabrice at gmail.com (Fabrice Fontaine) Date: Tue, 1 Nov 2022 00:13:33 +0100 Subject: [Buildroot] [PATCH 1/1] package/libtorrent-rasterbar: openssl is optional, not mandatory Message-ID: <20221031231333.706055-1-fontaine.fabrice@gmail.com> openssl is optional, not mandatory, since the addition of the package in commit 0393f5d34433e34e49ff7ce0fb998735453ed4fc Signed-off-by: Fabrice Fontaine --- package/libtorrent-rasterbar/Config.in | 1 - package/libtorrent-rasterbar/libtorrent-rasterbar.mk | 9 ++++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/package/libtorrent-rasterbar/Config.in b/package/libtorrent-rasterbar/Config.in index fe9a9fc027..459edc1be5 100644 --- a/package/libtorrent-rasterbar/Config.in +++ b/package/libtorrent-rasterbar/Config.in @@ -18,7 +18,6 @@ config BR2_PACKAGE_LIBTORRENT_RASTERBAR depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # exception_ptr select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_SYSTEM - select BR2_PACKAGE_OPENSSL help libtorrent is a feature complete C++ bittorrent implementation focusing on efficiency and scalability. diff --git a/package/libtorrent-rasterbar/libtorrent-rasterbar.mk b/package/libtorrent-rasterbar/libtorrent-rasterbar.mk index 914e0cbca3..085b38343c 100644 --- a/package/libtorrent-rasterbar/libtorrent-rasterbar.mk +++ b/package/libtorrent-rasterbar/libtorrent-rasterbar.mk @@ -11,7 +11,7 @@ LIBTORRENT_RASTERBAR_LICENSE = BSD-3-Clause LIBTORRENT_RASTERBAR_LICENSE_FILES = COPYING LIBTORRENT_RASTERBAR_CPE_ID_VENDOR = libtorrent LIBTORRENT_RASTERBAR_CPE_ID_PRODUCT = libtorrent -LIBTORRENT_RASTERBAR_DEPENDENCIES = host-pkgconf boost openssl +LIBTORRENT_RASTERBAR_DEPENDENCIES = host-pkgconf boost LIBTORRENT_RASTERBAR_INSTALL_STAGING = YES LIBTORRENT_RASTERBAR_CONF_OPTS = \ --with-boost-libdir=$(STAGING_DIR)/usr/lib \ @@ -37,4 +37,11 @@ else LIBTORRENT_RASTERBAR_CONF_OPTS += --without-libiconv endif +ifeq ($(BR2_PACKAGE_OPENSSL),y) +LIBTORRENT_RASTERBAR_DEPENDENCIES += openssl +LIBTORRENT_RASTERBAR_CONF_OPTS += --enable-encryption +else +LIBTORRENT_RASTERBAR_CONF_OPTS += --disable-encryption +endif + $(eval $(autotools-package)) -- 2.35.1 From christian at paral.in Mon Oct 31 23:27:49 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:49 -0700 Subject: [Buildroot] [PATCH v2 1/4] support/testing/tests/package/test_docker-compose: fix docker compose binary name Message-ID: <20221031232752.626154-1-christian@paral.in> Docker compose is now invoked as "docker compose" not "docker-compose." Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 1ce132c242..10ceee3167 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,7 +40,7 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker-compose up -d', 120) + self.assertRunOk('docker compose up -d', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:50 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:50 -0700 Subject: [Buildroot] [PATCH v2 2/4] support/testing/tests/package/test_docker-compose: fix docker compose container name In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-2-christian@paral.in> Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index 10ceee3167..c940cc8839 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -42,7 +42,7 @@ class TestDockerCompose(infra.basetest.BRTest): # will download container if not available, which may take some time self.assertRunOk('docker compose up -d', 120) # container may take some time to start - self.assertRunOk('while ! docker inspect root_busybox_1 2>&1 >/dev/null; do sleep 1; done', 120) + self.assertRunOk('while ! docker inspect root-busybox-1 2>&1 >/dev/null; do sleep 1; done', 120) self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) self.assertRunOk('cmp /bin/busybox /tmp/busybox', 120) -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:52 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:52 -0700 Subject: [Buildroot] [PATCH v2 4/4] support/testing/tests/package/test_docker-compose: update kernel to 4.19.262 In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-4-christian@paral.in> Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index a833c68233..38b669fc6d 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -15,7 +15,7 @@ class TestDockerCompose(infra.basetest.BRTest): BR2_ROOTFS_POST_SCRIPT_ARGS="{}" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y - BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204" + BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.262" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="{}" BR2_PACKAGE_CA_CERTIFICATES=y -- 2.38.1 From christian at paral.in Mon Oct 31 23:27:51 2022 From: christian at paral.in (Christian Stewart) Date: Mon, 31 Oct 2022 16:27:51 -0700 Subject: [Buildroot] [PATCH v2 3/4] support/testing/tests/package/test_docker-compose: quiet overly verbose output In-Reply-To: <20221031232752.626154-1-christian@paral.in> References: <20221031232752.626154-1-christian@paral.in> Message-ID: <20221031232752.626154-3-christian@paral.in> Docker compose up outputs terminal control characters intended for interactive output viewing. Wget similarly can use the -q option to produce quieter logs. Signed-off-by: Christian Stewart --- support/testing/tests/package/test_docker_compose.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/support/testing/tests/package/test_docker_compose.py b/support/testing/tests/package/test_docker_compose.py index c940cc8839..a833c68233 100644 --- a/support/testing/tests/package/test_docker_compose.py +++ b/support/testing/tests/package/test_docker_compose.py @@ -40,10 +40,10 @@ class TestDockerCompose(infra.basetest.BRTest): def docker_compose_test(self): # will download container if not available, which may take some time - self.assertRunOk('docker compose up -d', 120) + self.assertRunOk('docker compose up -d --quiet-pull', 120) # container may take some time to start self.assertRunOk('while ! docker inspect root-busybox-1 2>&1 >/dev/null; do sleep 1; done', 120) - self.assertRunOk('wget -O /tmp/busybox http://127.0.0.1/busybox', 120) + self.assertRunOk('wget -q -O /tmp/busybox http://127.0.0.1/busybox', 120) self.assertRunOk('cmp /bin/busybox /tmp/busybox', 120) def test_run(self): -- 2.38.1